diff options
Diffstat (limited to 'contrib/ncurses/misc/terminfo.src')
| -rw-r--r-- | contrib/ncurses/misc/terminfo.src | 17257 |
1 files changed, 17257 insertions, 0 deletions
diff --git a/contrib/ncurses/misc/terminfo.src b/contrib/ncurses/misc/terminfo.src new file mode 100644 index 000000000000..3ef04c95d389 --- /dev/null +++ b/contrib/ncurses/misc/terminfo.src @@ -0,0 +1,17257 @@ +######## TERMINAL TYPE DESCRIPTIONS SOURCE FILE +# +# This version of terminfo.src is distributed with ncurses. +# +# Version 10.2.1 +# $Date: 1999/08/22 00:05:28 $ +# terminfo syntax +# +# Eric S. Raymond (current maintainer) +# John Kunze, Berkeley +# Craig Leres, Berkeley +# +# Please e-mail changes to terminfo@ccil.org; the old termcap@berkeley.edu +# address is no longer valid. The latest version can always be found at +# <http://earthspace.net/terminfo>. +# +# PURPOSE OF THIS FILE: +# +# This file describes the capabilities of various character-cell terminals, +# as needed by software such as screen-oriented editors. +# +# Other terminfo and termcap files exist, supported by various OS vendors +# or as relics of various older versions of UNIX. This one is the longest +# and most comprehensive one in existence. It subsumes not only the entirety +# of the historical 4.4BSD, GNU, System V and SCO termcap files and the BRL +# termcap file, but also large numbers of vendor-maintained termcap and +# terminfo entries more complete and carefully tested than those in historical +# termcap/terminfo versions. +# +# Pointers to related resources (including the ncurses distribution) may +# be found at <http://earthspace.net/terminfo>. +# +# INTERNATIONALIZATION: +# +# This file uses only the US-ASCII character set (no ISO8859 characters). +# +# This file assumes a US-ASCII character set. If you need to fix this, start +# by global-replacing \E(B and \E)B with the appropriate ISO 6429 enablers +# for your character set. \E(A and \E)A enables the British character set +# with the pound sign at position 2/3. +# +# In a Japanese-processing environment using EUC/Japanese or Shift-JIS, +# C1 characters are considered the first-byte set of the Japanese encodings, +# so \E)0 should be avoided in <enacs> and initialization strings. +# +# FILE FORMAT: +# +# The version you are looking at may be in any of three formats: master +# (terminfo with OT capabilities), stock terminfo, or termcap. You can tell +# which by the format given in the header above. +# +# The master format is accepted and generated by the terminfo tools in the +# ncurses suite; it differs from stock (System V-compatible) terminfo only +# in that it admits a group of capabilities (prefixed `OT') equivalent to +# various obsolete termcap capabilities. You can, thus, convert from master +# to stock terminfo simply by filtering with `sed "/OT[^,]*,/s///"'; but if +# you have ncurses `tic -I' is nicer (among other things, it automatically +# outputs entries in a canonical form). +# +# The termcap version is generated automatically from the master version +# using tic -C. This filtering leaves in the OT capabilities under their +# original termcap names. All translated entries fit within the 1023-byte +# string-table limit of archaic termcap libraries except where explicitly +# noted below. Note that the termcap translation assumes that your termcap +# library can handle multiple tc capabilities in an entry. 4.4BSD has this +# capability. Older versions of GNU termcap, through 1.3, do not. +# +# For details on these formats, see terminfo(5) in the ncurses distribution, +# and termcap(5) in the 4.4BSD Unix Programmer's Manual. Be aware that 4.4BSD +# curses has been declared obsolete by the caretakers of the 4.4BSD sources +# as of June 1995; they are encouraging everyone to migrate to ncurses. +# +# Note: unlike some other distributed terminfo files (Novell Unix & SCO's), +# no entry in this file has embedded comments. This is so source translation +# to termcap only has to carry over leading comments. Also, no name field +# contains embedded whitespace (such whitespace confuses rdist). +# +# Further note: older versions of this file were often installed with an editor +# script (reorder) that moved the most common terminal types to the front of +# the file. This should no longer be necessary, as the file is now ordered +# roughly by type frequency with ANSI/VT100 and other common types up front. +# +# Some information has been merged in from terminfo files distributed by +# USL and SCO (see COPYRIGHTS AND OTHER DELUSIONS below). Much information +# comes from vendors who maintain official terminfos for their hardware +# (notably DEC and Wyse). +# +# A detailed change history is included at the end of this file. +# +# FILE ORGANIZATION: +# +# Comments in this file begin with # - they cannot appear in the middle +# of a terminfo/termcap entry (this feature had to be sacrificed in order +# to allow standard terminfo and termcap syntax to be generated cleanly from +# the master format). Individual capabilities are commented out by +# placing a period between the colon and the capability name. +# +# The file is divided up into major sections (headed by lines beginning with +# the string "########") and minor sections (beginning with "####"); do +# +# grep "^####" <file> | more +# +# to see a listing of section headings. The intent of the divisions is +# (a) to make it easier to find things, and (b) to order the database so +# that important and frequently-encountered terminal types are near the +# front (so that you'll get reasonable search efficiency from a linear +# search of the termcap form even if you don't use reorder). Minor sections +# usually correspond to manufacturers or standard terminal classes. +# Parenthesized words following manufacturer names are type prefixes or +# product line names used by that manufacturers. +# +# HOW TO READ THE ENTRIES: +# +# The first name in an entry is the canonical name for the model or +# type, last entry is a verbose description. Others are mnemonic synonyms for +# the terminal. +# +# Terminal names look like <manufacturer> <model> - <modes/options> +# The part to the left of the dash, if a dash is present, describes the +# particular hardware of the terminal. The part to the right may be used +# for flags indicating special ROMs, extra memory, particular terminal modes, +# or user preferences. +# +# All names should be in lower case, for consistency in typing. +# +# The following are conventionally used suffixes: +# -2p Has two pages of memory. Likewise 4p, 8p, etc. +# -am Enable auto-margin. +# -m Monochrome. Suppress color support +# -mc Magic-cookie. Some terminals (notably older Wyses) can +# only support one attribute without magic-cookie lossage. +# Their base entry is usually paired with another that +# uses magic cookies to support multiple attributes. +# -nam No auto-margin - suppress <am> capability +# -nl No labels - suppress soft labels +# -ns No status line - suppress status line +# -rv Terminal in reverse video mode (black on white) +# -s Enable status line. +# -vb Use visible bell (<flash>) rather than <bel>. +# -w Wide - in 132 column mode. +# If a name has multiple suffixes and one is a line height, that one should +# go first. Thus `aaa-30-s-rv' is recommended over `aaa-s-rv-30'. +# +# Entries with embedded plus signs are designed to be included through use/tc +# capabilities, not used as standalone entries. +# +# To avoid search clashes, some older all-numeric names for terminals have +# been removed (i.e., "33" for the Model 33 Teletype, "2621" for the HP2621). +# All primary names of terminals now have alphanumeric prefixes. +# +# Comments marked "esr" are mostly results of applying the termcap-compiler +# code packaged with ncurses and contemplating the resulting error messages. +# In many cases, these indicated obvious fixes to syntax garbled by the +# composers. In a few cases, I was able to deduce corrected forms for garbled +# capabilities by looking at context. All the information in the original +# entries is preserved in the comments. +# +# In the comments, terminfo capability names are bracketed with <> (angle +# brackets). Termcap capability names are bracketed with :: (colons). +# +# INTERPRETATION OF USER CAPABILITIES +# +# The System V Release 4 and XPG4 terminfo format defines ten string +# capabilities for use by applications, <u0>...<u9>. In this file, we use +# certain of these capabilities to describe functions which are not covered +# by terminfo. The mapping is as follows: +# +# u9 terminal enquire string (equiv. to ANSI/ECMA-48 DA) +# u8 terminal answerback description +# u7 cursor position request (equiv. to VT100/ANSI/ECMA-48 DSR 6) +# u6 cursor position report (equiv. to ANSI/ECMA-48 CPR) +# +# The terminal enquire string <u9> should elicit an answerback response +# from the terminal. Common values for <u9> will be ^E (on older ASCII +# terminals) or \E[c (on newer VT100/ANSI/ECMA-48-compatible terminals). +# +# The cursor position request (<u7>) string should elicit a cursor position +# report. A typical value (for VT100 terminals) is \E[6n. +# +# The terminal answerback description (u8) must consist of an expected +# answerback string. The string may contain the following scanf(3)-like +# escapes: +# +# %c Accept any character +# %[...] Accept any number of characters in the given set +# +# The cursor position report (<u6>) string must contain two scanf(3)-style +# %d format elements. The first of these must correspond to the Y coordinate +# and the second to the %d. If the string contains the sequence %i, it is +# taken as an instruction to decrement each value after reading it (this is +# the inverse sense from the cup string). The typical CPR value is +# \E[%i%d;%dR (on VT100/ANSI/ECMA-48-compatible terminals). +# +# These capabilities are used by tac(1m), the terminfo action checker soon +# to be distributed with ncurses. +# +# TABSET FILES +# +# All the entries in this file have been edited to assume that the tabset +# files directory is /usr/share/tabset, in conformance with the File Hierarchy +# Standard for Linux and open-source BSD systems. Some vendors (notably Sun) +# use /usr/lib/tabset or (more recently) /usr/share/lib/tabset. +# +# No curses package we know of actually uses these files. If their location +# is an issue, you will have to hand-patch the file locations before compiling +# this file. +# +# REQUEST FOR CONTACT INFORMATION AND HISTORICAL MATERIAL +# +# As the ANSI/ECMA-48 standard and variants take firmer hold, and as +# character-cell terminals are increasingly replaced by X displays, much of +# this file is becoming a historical document (this is part of the reason for +# the new organization, which puts ANSI types, xterm, free-Unix consoles, +# and vt100 up front in confidence that this will catch 95% of new hardware). +# +# For the terminal types still alive, I'd like to have manufacturer's +# contact data (Internet address and/or snail-mail + phone). +# +# I'm also interested in enriching the comments so that the latter portions of +# the file do in fact become a potted history of VDT technology as seen by +# UNIX hackers. Ideally, I'd like the headers for each manufacturer to +# include its live/dead/out-of-the-business status, and for as many +# terminal types as possible to be tagged with information like years +# of heaviest use, popularity, and interesting features. +# +# I'm especially interested in identifying the obscure entries listed under +# `Miscellaneous obsolete terminals, manufacturers unknown' before the tribal +# wisdom about them gets lost. If you know a lot about obscure old terminals, +# please go to the terminfo resource page, grab the UFO file (ufo.ti), and +# eyeball it for things you can identify and describe. +# +# If you have been around long enough to contribute, please read the file +# with this in mind and send me your annotations. +# +# COPYRIGHTS AND OTHER DELUSIONS +# +# The BSD ancestor of this file had a standard Regents of the University of +# California copyright with dates from 1980 to 1993. +# +# Some information has been merged in from a terminfo file SCO distributes. +# It has an obnoxious boilerplate copyright which I'm ignoring because they +# took so much of the content from the ancestral BSD versions of this file +# and didn't attribute it, thereby violating the BSD Regents' copyright. +# +# Not that anyone should care. However many valid functions copyrights may +# serve, putting one on a termcap/terminfo file with hundreds of anonymous +# contributors makes about as much sense as copyrighting a wall-full of +# graffiti -- it's legally dubious, ethically bogus, and patently ridiculous. +# +# This file deliberately has no copyright. It belongs to no one and everyone. +# If you claim you own it, you will merely succeed in looking like a fool. +# Use it as you like. Use it at your own risk. Copy and redistribute freely. +# There are no guarantees anywhere. Svaha! +# + +######## ANSI, UNIX CONSOLE, AND SPECIAL TYPES +# +# This section describes terminal classes and maker brands that are still +# quite common. +# + +#### Specials +# +# Special "terminals". These are used to label tty lines when you don't +# know what kind of terminal is on it. The characteristics of an unknown +# terminal are the lowest common denominator - they look about like a ti 700. +# + +dumb|80-column dumb tty, + am, + cols#80, + bel=^G, cr=^M, cud1=^J, ind=^J, +unknown|unknown terminal type, + gn, use=dumb, +lpr|printer|line printer, + hc, os, + cols#132, lines#66, + bel=^G, cr=^M, cub1=^H, cud1=^J, ff=^L, ind=^J, +glasstty|classic glass tty interpreting ASCII control characters, + am, + cols#80, + bel=^G, clear=^L, cr=^M, cub1=^H, cud1=^J, ht=^I, kbs=^H, + kcub1=^H, kcud1=^J, nel=^M^J, + +#### ANSI.SYS/ISO 6429/ECMA-48 Capabilities +# +# See the end-of-file comment for more on these. +# + +# The IBM PC alternate character set. Plug this into any Intel console entry. +# We use \E[11m for rmacs rather than \E[12m so the <acsc> string can use the +# ROM graphics for control characters such as the diamond, up- and down-arrow. +# This works with the System V, Linux, and BSDI consoles. It's a safe bet this +# will work with any Intel console, they all seem to have inherited \E[11m +# from the ANSI.SYS de-facto standard. +klone+acs|alternate character set for ansi.sys displays, + acsc=+\020\,\021-\030.^Y0\333`\004a\261f\370g\361h\260j\331k\277l\332m\300n\305o~p\304q\304r\304s_t\303u\264v\301w\302x\263y\363z\362{\343|\330}\234~\376, + rmacs=\E[10m, smacs=\E[11m, + +# Highlight controls corresponding to the ANSI.SYS standard. Most +# console drivers for Intel boxes obey these. Makes the same assumption +# about \E[11m as klone+acs. True ANSI/ECMA-48 would have <rmso=\E[27m>, +# <rmul=\E[24m>, but this isn't a documented feature of ANSI.SYS. +klone+sgr|attribute control for ansi.sys displays, + blink=\E[5m, bold=\E[1m, invis=\E[8m, rev=\E[7m, + rmpch=\E[10m, rmso=\E[m, rmul=\E[m, + sgr=\E[0;10%?%p1%t;7%;%?%p2%t;4%;%?%p3%t;7%;%?%p4%t;5%;%?%p6%t;1%;%?%p7%t;8%;%?%p9%t;11%;m, + sgr0=\E[0;10m, smpch=\E[11m, smso=\E[7m, smul=\E[4m, + use=klone+acs, + +# Highlight controls corresponding to the ANSI.SYS standard. *All* +# console drivers for Intel boxes obey these. Does not assume \E[11m will +# work; uses \E[12m instead, which is pretty bulletproof but loses you the ACS +# diamond and arrow characters under curses. +klone+sgr-dumb|attribute control for ansi.sys displays (no ESC [ 11 m), + blink=\E[5m, bold=\E[1m, invis=\E[8m, rev=\E[7m, rmso=\E[m, + rmul=\E[m, + sgr=\E[0;10%?%p1%t;7%;%?%p2%t;4%;%?%p3%t;7%;%?%p4%t;5%;%?%p6%t;1%;%?%p7%t;8%;%?%p9%t;12%;m, + sgr0=\E[0;10m, smacs=\E[12m, smso=\E[7m, smul=\E[4m, + use=klone+acs, + +# KOI8-R (RFC1489) acs (alternate character set) +# From: Qing Long <qinglong@Bolizm.ihep.su>, 24 Feb 1996. +klone+koi8acs|alternate character set for ansi.sys displays with KOI8 charset, + acsc=+\020\,\021-\036.^_0\215`\004a\237f\234g\232h\222i\220j\205k\203l\202m\204n\212o\213p\216q\0r\217s\214t\206u\207v\210w\211x\201y\230z\231{\267|\274}L~\225, + rmacs=\E[10m, smacs=\E[11m, + +# ANSI.SYS color control. The setab/setaf caps depend on the coincidence +# between SVr4/XPG4's color numbers and ANSI.SYS attributes. Here are longer +# but equivalent strings that don't rely on that coincidence: +# setb=\E[4%?%p1%{1}%=%t4%e%p1%{3}%=%t6%e%p1%{4}%=%t1%e%p1%{6}%=%t3%e%p1%d%;m, +# setf=\E[3%?%p1%{1}%=%t4%e%p1%{3}%=%t6%e%p1%{4}%=%t1%e%p1%{6}%=%t3%e%p1%d%;m, +# The DOS 5 manual asserts that these sequences meet the ISO 6429 standard. +# They match a subset of ECMA-48. +klone+color|color control for ansi.sys and ISO6429-compatible displays, + colors#8, ncv#3, pairs#64, + op=\E[37;40m, setab=\E[4%p1%dm, setaf=\E[3%p1%dm, + +# This is better than klone+color, it doesn't assume white-on-black as the +# default color pair, but many `ANSI' terminals don't grok the <op> cap. +ecma+color|color control for ECMA-48-compatible terminals, + colors#8, ncv#3, pairs#64, + op=\E[39;49m, setab=\E[4%p1%dm, setaf=\E[3%p1%dm, + +# Attribute control for ECMA-48-compatible terminals +ecma+sgr|attribute capabilities for true ECMA-48 terminals, + rmso=\E[27m, rmul=\E[24m, + use=klone+sgr, + +# For comparison, here are all the capabilities implied by the Intel +# Binary Compatibility Standard (level 2) that fit within terminfo. +# For more detail on this rather pathetic standard, see the comments +# near the end of this file. +ibcs2|Intel Binary Compatibility Standard prescriptions, + cbt=\E[Z, clear=\Ec, cub=\E[%p1%dD, cud=\E[%p1%dB, + cuf=\E[%p1%dC, cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA, + dch=\E[%p1%dP, dispc=\E=%p1%dg, ech=\E[%p1%dX, + hpa=\E[%i%p1%dG, hts=\EH, ich=\E[%p1%d@, il=\E[%p1%dL, + indn=\E[%p1%dS, rc=\E7, rin=\E[%p1%dT, rmam=\E[?7l, sc=\E7, + smam=\E[?7h, tbc=\E[g, vpa=\E[%i%p1%dd, + +#### ANSI/ECMA-48 terminals and terminal emulators +# +# See near the end of this file for details on ANSI conformance. +# Don't mess with these entries! Lots of other entries depend on them! +# +# This section lists entries in a least-capable to most-capable order. +# if you're in doubt about what `ANSI' matches yours, try them in that +# order and back off from the first that breaks. + +ansi-mini|any ansi terminal with pessimistic assumptions, + am, + cols#80, it#8, lines#24, + clear=\E[H\E[2J$<50>, cub1=\E[D, cud1=\E[B, cuf1=\E[C, + cup=\E[%i%p1%d;%p2%dH, cuu1=\E[A, el=\E[K, home=\E[H, + ht=^I, + +# ANSI X3.64 from emory!mlhhh (Hugh Hansard) via BRL +# +# The following is an entry for the full ANSI 3.64 (1977). It lacks +# padding, but most terminals using the standard are "fast" enough +# not to require any -- even at 9600 bps. If you encounter problems, +# try including the padding specifications. +# +# Note: the :as: and :ae: specifications are not implemented here, for +# the available termcap documentation does not make clear WHICH alternate +# character set to specify. ANSI 3.64 seems to make allowances for several. +# Please make the appropriate adjustments to fit your needs -- that is +# if you will be using alternate character sets. +# +# There are very few terminals running the full ANSI 3.64 standard, +# so I could only test this entry on one verified terminal (Visual 102). +# I would appreciate the results on other terminals sent to me. +# +# Please report comments, changes, and problems to: +# +# U.S. MAIL: Hugh Hansard +# Box: 22830 +# Emory University +# Atlanta, GA. 30322. +# +# USENET {akgua,msdc,sb1,sb6,gatech}!emory!mlhhh. +# +ansi77|ansi 3.64 standard 1977 version, + am, mir, + cols#80, it#8, lines#24, + bel=^G, clear=\E[;H\E[2J, cr=^M, csr=\E[%i%p1%d;%p2%dr, + cub1=^H, cud1=\E[B, cuf1=\E[C, cup=\E[%i%p1%d;%p2%dH, + cuu1=\E[A, dch1=\E[P, dl1=\E[M$<5*/>, ed=\E[J, el=\E[K, + home=\E[H, ht=^I, il1=\E[L$<5*/>, ind=\ED, kbs=^H, + kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A, kf1=\EOP, + kf2=\EOR, kf4=\EOS, khome=\E[H, nel=^M\ED, ri=\EM, + rmir=\E[4l, rmso=\E[m, rmul=\E[m, smir=\E[4h, smso=\E[7m, + smul=\E[4m, + +# Procomm and some other ANSI emulations don't recognize all of the ANSI- +# standard capabilities. This entry deletes <cuu>, <cuf>, <cud>, <cub>, and +# <vpa>/<hpa> capabilities, forcing curses to use repetitions of <cuu1>, +# <cuf1>, <cud1> and <cub1>. Also deleted <ich> and <ich1>, as QModem up to +# 5.03 doesn't recognize these. Finally, we delete <rep> and <ri>, which seem +# to confuse many emulators. On the other hand, we can count on these programs +# doing <rmacs>/<smacs>/<sgr>. Older versions of this entry featured +# <invis=\E[9m>, but <invis=\E[8m> now seems to be more common under +# ANSI.SYS influence. +# From: Eric S. Raymond <esr@snark.thyrsus.com> Oct 30 1995 +pcansi-m|pcansi-mono|ibm-pc terminal programs claiming to be ansi (mono mode), + am, mir, msgr, + cols#80, it#8, lines#24, + bel=^G, cbt=\E[Z, clear=\E[H\E[J, cr=^M, cub1=\E[D, + cud1=\E[B, cuf1=\E[C, cup=\E[%i%p1%d;%p2%dH, cuu1=\E[A, + dch1=\E[P, dl1=\E[M, ed=\E[J, el=\E[K, home=\E[H, ht=^I, + hts=\EH, il1=\E[L, ind=^J, kbs=^H, kcub1=\E[D, kcud1=\E[B, + kcuf1=\E[C, kcuu1=\E[A, khome=\E[H, tbc=\E[2g, + use=klone+sgr-dumb, +pcansi-25-m|pcansi25m|ibm-pc terminal programs with 25 lines (mono mode), + lines#25, use=pcansi-m, +pcansi-33-m|pcansi33m|ibm-pc terminal programs with 33 lines (mono mode), + lines#33, use=pcansi-m, +pcansi-43-m|ansi43m|ibm-pc terminal programs with 43 lines (mono mode), + lines#43, use=pcansi-m, +# The color versions. All PC emulators do color... +pcansi|ibm-pc terminal programs claiming to be ansi, + use=klone+color, use=pcansi-m, +pcansi-25|pcansi25|ibm-pc terminal programs with 25 lines, + lines#25, use=pcansi, +pcansi-33|pcansi33|ibm-pc terminal programs with 33 lines, + lines#33, use=pcansi, +pcansi-43|pcansi43|ibm-pc terminal programs with 43 lines, + lines#43, use=pcansi, + +# ansi-m -- full ANSI X3.64 with ANSI.SYS-compatible attributes, no color. +# If you want pound signs rather than dollars, replace `B' with `A' +# in the <s0ds>, <s1ds>, <s2ds>, and <s3ds> capabilities. +# From: Eric S. Raymond <esr@snark.thyrsus.com> Nov 6 1995 +ansi-m|ansi-mono|ANSI X3.64-1979 terminal with ANSI.SYS compatible attributes, + mc5i, + cub=\E[%p1%dD, cud=\E[%p1%dB, cuf=\E[%p1%dC, + cuu=\E[%p1%dA, dch=\E[%p1%dP, dl=\E[%p1%dM, + ech=\E[%p1%dX, el1=\E[1K, hpa=\E[%i%p1%dG, ht=\E[I, + ich=\E[%p1%d@, il=\E[%p1%dL, indn=\E[%p1%dS, kbs=^H, + kcbt=\E[Z, kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A, + kich1=\E[L, mc4=\E[4i, mc5=\E[5i, nel=\r\E[S, + rep=%p1%c\E[%p2%{1}%-%db, rin=\E[%p1%dT, s0ds=\E(B, + s1ds=\E)B, s2ds=\E*B, s3ds=\E+B, tbc=\E[2g, + vpa=\E[%i%p1%dd, use=pcansi-m, + +# ansi -- this terminfo expresses the largest subset of X3.64 that will fit in +# standard terminfo. Assumes ANSI.SYS-compatible attributes and color. +# From: Eric S. Raymond <esr@snark.thyrsus.com> Nov 6 1995 +ansi|ansi/pc-term compatible with color, + u6=\E[%i%d;%dR, u7=\E[6n, u8=\E[?%[;0123456789]c, + u9=\E[c, + use=ecma+color, use=klone+sgr, use=ansi-m, + +#### DOS ANSI.SYS variants +# +# This completely describes the sequences specified in the DOS 2.1 ANSI.SYS +# documentation (except for the keyboard key reassignment feature, which +# doen't fit the <pfkey> model well). The klone+acs sequences were valid +# though undocumented. The <pfkey> capability is untested but should work for +# keys F1-F10 (%p1 values outside this range will yield unpredictable results). +# From: Eric S. Raymond <esr@snark.thyrsus.com> Nov 7 1995 +ansi.sys-old|ANSI.SYS under PC-DOS 2.1, + am, mir, msgr, xon, + cols#80, lines#25, + clear=\E[2J, cub1=^H, cud1=\E[B, cuf1=\E[C, + cup=\E[%i%p1%d;%p2%dH, cuu1=\E[A, el=\E[k, home=\E[H, + is2=\E[m\E[?7h, kcub1=^H, kcud1=^J, kcuf1=^L, kcuu1=^K, + khome=^^, pfkey=\E[0;%p1%{58}%+%d;%p2"%s", rc=\E[u, + rmam=\E[?7l, sc=\E[s, smam=\E[?7h, u6=\E[%i%d;%dR, + u7=\E[6n, + use=klone+color, use=klone+sgr, +ansi.sys|ANSI.SYS 3.1 and later versions, + el=\E[K, use=ansi.sys-old, + +# +# Define IBM PC keypad keys for vi as per MS-Kermit while using ANSI.SYS. +# This should only be used when the terminal emulator cannot redefine the keys. +# Since redefining keys with ansi.sys also affects PC-DOS programs, the key +# definitions must be restored. If the terminal emulator is quit while in vi +# or others using <smkx>/<rmkx>, the keypad will not be defined as per PC-DOS. +# The PgUp and PgDn are prefixed with ESC so that tn3270 can be used on Unix +# (^U and ^D are already defined for tn3270). The ESC is safe for vi but it +# does "beep". ESC ESC i is used for Ins to avoid tn3270 ESC i for coltab. +# Note that <kcub1> is always BS, because PC-dos can tolerate this change. +# Caution: vi is limited to 256 string bytes, longer crashes or weirds out vi. +# Consequently the End keypad key could not be set (it is relatively safe and +# actually useful because it sends ^@ O, which beeps and opens a line above). +ansi.sysk|ansisysk|PC-DOS 3.1 ANSI.SYS with keypad redefined for vi, + is2=U2 PC-DOS 3.1 ANSI.SYS with keypad redefined for vi 9-29-86\n\E[;75;8p, + rmkx=\E[;71;0;71p\E[;72;0;72p\E[;73;0;73p\E[;77;0;77p\E[;80;0;80p\E[;81;0;81p\E[;82;0;82p\E[;83;0;83p, + smkx=\E[;71;30p\E[;72;11p\E[;73;27;21p\E[;77;12p\E[;80;10p\E[;81;27;4p\E[;82;27;27;105p\E[;83;127p, + use=ansi.sys, +# +# Adds ins/del line/character, hence vi reverse scrolls/inserts/deletes nicer. +nansi.sys|nansisys|PC-DOS Public Domain NANSI.SYS, + dch1=\E[1P, dl1=\E[1M, ich1=\E[1@, il1=\E[1L, + is2=U3 PC-DOS Public Domain NANSI.SYS 9-23-86\n, use=ansi.sys, +# +# See ansi.sysk and nansi.sys above. +nansi.sysk|nansisysk|PC-DOS Public Domain NANSI.SYS with keypad redefined for vi, + dch1=\E[1P, dl1=\E[1M, ich1=\E[1@, il1=\E[1L, + is2=U4 PC-DOS Public Domain NANSI.SYS with keypad redefined for vi 9-29-86\n\E[;75;8p, + use=ansi.sysk, + +#### ANSI console types +# + +#### BeOS +# +# BeOS entry for Terminal program Seems to be almost ANSI +beterm|BeOS Terminal, + am, eo, mir, msgr, xenl, xon, + colors#8, cols#80, it#8, lines#25, ncv#5, pairs#64, + bel=^G, blink=\E[5m, bold=\E[1m, clear=\E[H\E[J, cr=^M, + csr=\E[%i%p1%d;%p2%dr, cub1=^H, cud1=^J, cuf1=\E[C, + cup=\E[%i%p1%d;%p2%dH, cuu1=\E[A, dch=\E[%p1%dP, + dch1=\E[P, dim=\E[2m, dl=\E[%p1%dM, dl1=\E[M, ed=\E[J, + el=\E[K, flash=\E[?5h\E[?5l$<200/>, home=\E[H, + hpa=\E[%i%p1%dG, ht=^I, hts=\EH, ich=\E[%p1%d@, ich1=\E[@, + il=\E[%p1%dL, il1=\E[L, ind=^J, invis=\E[8m, kb2=\E[G, + kbs=^H, kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A, + kend=\E[4~, kf1=\E[11~, kf10=\E[20~, kf11=\E[21~, + kf12=\E[22~, kf2=\E[12~, kf3=\E[13~, kf4=\E[14~, + kf5=\E[15~, kf6=\E[16~, kf7=\E[17~, kf8=\E[18~, kf9=\E[19~, + khome=\E[1~, kich1=\E[2~, knp=\E[6~, kpp=\E[5~, kspd=^Z, + nel=^M^J, op=\E[m, rc=\E8, rev=\E[7m, ri=\EM, rmir=\E[4l, + rmso=\E[m, rmul=\E[24m, rs1=\Ec, sc=\E7, setab=\E[4%p1%dm, + setaf=\E[3%p1%dm, setb=\E[%p1%{40}%+%cm, + setf=\E[%p1%{30}%+%cm, sgr0=\E[0;10m, smir=\E[4h, + smso=\E[7m, smul=\E[4m, u6=\E[%i%p1%d;%p2%dR, u7=\E[6n, + u8=\E[?6c, u9=\E[c, vpa=\E[%i%p1%dd, + +#### Linux consoles +# + +# This entry is good for the 1.2.13 or later version of the Linux console. +# +# *************************************************************************** +# * * +# * WARNING: * +# * Linuxes come with a default keyboard mapping kcbt=^I. This entry, in * +# * response to user requests, assumes kcbt=\E[Z, the ANSI/ECMA reverse-tab * +# * character. Here are the keymap replacement lines that will set this up: * +# * * +# keycode 15 = Tab Tab +# alt keycode 15 = Meta_Tab +# shift keycode 15 = F26 +# string F26 ="\033[Z" +# * * +# * This has to use a key slot which is unfortunate (any unused one will * +# * do, F26 is the higher-numbered one). The change ought to be built * +# * into the kernel tables. * +# * * +# *************************************************************************** +# +# The 1.3.x kernels add color-change capabilities; if yours doesn't have this +# and it matters, turn off <ccc>. The %02x escape used to implement this is +# not back-portable to SV curses and not supported in ncurses versions before +# 1.9.9. All linux kernels since 1.2.13 (at least) set the screen size +# themselves; this entry assumes that capability. +# +# The 2.2.x kernels add a private mode that sets the cursor type; use that to +# get a block cursor for cvvis. +# reported by Frank Heckenbach <frank@g-n-u.de>. +linux|linux console, + am, bce, eo, mir, msgr, xenl, xon, + it#8, ncv#2, + acsc=+\020\,\021-\030.^Y0\333`\004a\261f\370g\361h\260i\316j\331k\277l\332m\300n\305o~p\304q\304r\304s_t\303u\264v\301w\302x\263y\363z\362{\343|\330}\234~\376, + bel=^G, civis=\E[?25l\E[?1c, clear=\E[H\E[J, + cnorm=\E[?25h\E[?0c, cr=^M, csr=\E[%i%p1%d;%p2%dr, + cub1=^H, cud1=^J, cuf1=\E[C, cup=\E[%i%p1%d;%p2%dH, + cuu1=\E[A, cvvis=\E[?25h\E[?8c, dch=\E[%p1%dP, dch1=\E[P, + dim=\E[2m, dl=\E[%p1%dM, dl1=\E[M, ech=\E[%p1%dX, ed=\E[J, + el=\E[K, el1=\E[1K, flash=\E[?5h\E[?5l$<200/>, home=\E[H, + hpa=\E[%i%p1%dG, ht=^I, hts=\EH, ich=\E[%p1%d@, ich1=\E[@, + il=\E[%p1%dL, il1=\E[L, ind=^J, kb2=\E[G, kbs=\177, + kcbt=\E[Z, kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A, + kdch1=\E[3~, kend=\E[4~, kf1=\E[[A, kf10=\E[21~, + kf11=\E[23~, kf12=\E[24~, kf13=\E[25~, kf14=\E[26~, + kf15=\E[28~, kf16=\E[29~, kf17=\E[31~, kf18=\E[32~, + kf19=\E[33~, kf2=\E[[B, kf20=\E[34~, kf3=\E[[C, kf4=\E[[D, + kf5=\E[[E, kf6=\E[17~, kf7=\E[18~, kf8=\E[19~, kf9=\E[20~, + khome=\E[1~, kich1=\E[2~, knp=\E[6~, kpp=\E[5~, kspd=^Z, + nel=^M^J, rc=\E8, rev=\E[7m, ri=\EM, rmir=\E[4l, rmso=\E[27m, + rmul=\E[24m, rs1=\Ec\E]R, sc=\E7, + sgr=\E[0;10%?%p1%t;7%;%?%p2%t;4%;%?%p3%t;7%;%?%p4%t;5%;%?%p5%t;2%;%?%p6%t;1%;%?%p7%t;8%;%?%p9%t;11%;m, + smir=\E[4h, smul=\E[4m, tbc=\E[3g, u6=\E[%i%d;%dR, + u7=\E[6n, u8=\E[?6c, u9=\E[c, vpa=\E[%i%p1%dd, + use=klone+sgr, use=ecma+color, +linux-m|Linux console no color, + colors@, pairs@, + setab@, setaf@, setb@, setf@, use=linux, +linux-c-nc|linux console 1.3.x hack for ncurses only, + ccc, + initc=\E]P%p1%x%p2%{255}%*%{1000}%/%02x%p3%{255}%*%{1000}%/%02x%p4%{255}%*%{1000}%/%02x, + oc=\E]R, + use=linux, +# From: Dennis Henriksen <opus@osrl.dk>, 9 July 1996 +linux-c|linux console 1.3.6+ with private palette for each virtual console, + ccc, + colors#8, pairs#64, + initc=\E]P%?%p1%{9}%>%t%p1%{10}%-%'a'%+%c%e%p1%d%;%p2%{255}%&%Pr%gr%{16}%/%Px%?%gx%{9}%>%t%gx%{10}%-%'A'%+%c%e%gx%d%;%gr%{15}%&%Px%?%gx%{9}%>%t%gx%{10}%-%'A'%+%c%e%gx%d%;%p3%{255}%&%Pr%gr%{16}%/%Px%?%gx%{9}%>%t%gx%{10}%-%'A'%+%c%e%gx%d%;%gr%{15}%&%Px%?%gx%{9}%>%t%gx%{10}%-%'A'%+%c%e%gx%d%;%p4%{255}%&%Pr%gr%{16}%/%Px%?%gx%{9}%>%t%gx%{10}%-%'A'%+%c%e%gx%d%;%gr%{15}%&%Px%?%gx%{9}%>%t%gx%{10}%-%'A'%+%c%e%gx%d%;, + oc=\E]R, + use=linux, + +# See the note on ICH/ICH1 VERSUS RMIR/SMIR near the end of file +linux-nic|linux with ich/ich1 suppressed for non-curses programs, + ich@, ich1@, + use=linux, + +# This assumes you have used setfont(8) to load one of the Linux koi8-r fonts. +# acsc entry from Pavel Roskin" <pavel@absolute.spb.su>, 29 Sep 1997. +linux-koi8|linux with koi8 alternate character set, + acsc=+\020\,\021-\030.^Y0\215`\004a\221f\234g\237h\220i\276j\205k\203l\202m\204n\212o~p\0q\0r\0s_t\206u\207v\211w\210x\201y\230z\231{\267|\274~\224, + use=linux, use=klone+koi8acs, + +# Another entry for KOI8-r with Qing Long's acsc. +# (which one better complies with the standard?) +linux-koi8r|linux with koi8-r alternate character set, + kbs=^H, kcub1=^H, kcud1=^J, + use=linux, use=klone+koi8acs, + +# From: Matthew Vernon <mcv21@pick.sel.cam.ac.uk> +mach|Mach Console, + am, km, + cols#80, it#8, lines#25, + bel=^G, blink=\E[5m, bold=\E[1m, clear=\Ec, cr=^M, + cub=\E[%p1%dD, cub1=^H, cud=\E[%p1%dB, cud1=^J, + cuf=\E[%p1%dC, cuf1=\E[C, cup=\E[%i%p1%d;%p2%dH, + cuu=\E[%p1%dA, cuu1=\E[A, dl=\E[%p1%dM, dl1=\E[M, ed=\E[J, + el=\E[K, home=\E[H, ht=^I, il=\E[%p1%dL, il1=\E[L, ind=^J, + kbs=^H, kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A, + kdch1=\E[9, kend=\E[Y, kf1=\EOP, kf10=\EOY, kf2=\EOQ, + kf3=\EOR, kf4=\EOS, kf5=\EOT, kf6=\EOU, kf7=\EOV, kf8=\EOW, + kf9=\EOX, khome=\E[H, kich1=\E[@, kll=\E[F, knp=\E[U, + kpp=\E[V, nel=^M^J, rev=\E[7m, rmso=\E[0m, sgr0=\E[0m, + smso=\E[7m, +mach-bold|Mach Console with bold instead of underline, + rmul=\E[0m, smul=\E[1m, + use=mach, + +# Entry for the latin1 and latin2 fonts +linux-lat|linux with latin1 or latin2 alternate character set, + acsc=+\020\,\021-\030.^Y0\333`\004a\013f\370g\361h\260i\316j\211k\214l\206m\203n\305o~p\304q\212r\304s_t\207u\215v\301w\302x\205y\363z\362{\343|\330}\234~\376, + use=linux, + +# SCO console and SOS-Syscons console for 386bsd +# (scoansi: had unknown capabilities +# :Gc=N:Gd=K:Gh=M:Gl=L:Gu=J:Gv=\072:\ +# :GC=E:GD=B:GH=D:GL=\64:GU=A:GV=\63:GR=C: +# :G1=?:G2=Z:G3=@:G4=Y:G5=;:G6=I:G7=H:G8=<:\ +# :CW=\E[M:NU=\E[N:RF=\E[O:RC=\E[P:\ +# :WL=\E[S:WR=\E[T:CL=\E[U:CR=\E[V:\ +# I renamed GS/GE/HM/EN/PU/PD/RT and added klone+sgr-dumb, based +# on the <smacs>=\E[12m -- esr) +# +# In this description based on SCO's keyboard(HW) manpage list of default function key +# values: +# F13-F24 are shifted F1-F12 +# F25-F36 are control F1-F12 +# F37-F48 are shift+control F1-F12 +scoansi|SCO Extended ANSI standard crt, + am, eo, xon, + cols#80, it#8, lines#25, + blink=\E[5m, bold=\E[1m, cbt=\E[Z, clear=\E[H\E[2J, + cub1=\E[D, cud1=\E[B, cuf1=\E[C, cup=\E[%i%p1%d;%p2%dH, + cuu1=\E[A, dch1=\E[P, dl1=\E[M, ed=\E[J, el=\E[K, home=\E[H, + ht=^I, ich1=\E[@, il1=\E[L, ind=\E[S, kbs=^H, kcub1=\E[D, + kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A, kend=\E[F, kf1=\E[M, + kf10=\E[V, kf12=\E[W, kf13=\E[Y, kf14=\E[Z, kf15=\E[a, + kf16=\E[b, kf17=\E[c, kf18=\E[d, kf19=\E[e, kf2=\E[N, + kf20=\E[f, kf21=\E[g, kf22=\E[h, kf23=\E[i, kf24=\E[j, + kf25=\E[k, kf26=\E[l, kf27=\E[m, kf28=\E[n, kf29=\E[o, + kf3=\E[O, kf30=\E[p, kf31=\E[q, kf32=\E[r, kf33=\E[s, + kf34=\E[t, kf35=\E[u, kf36=\E[v, kf37=\E[w, kf38=\E[x, + kf39=\E[y, kf4=\E[P, kf40=\E[z, kf41=\E[@, kf42=\E[[, + kf43=\E[\\, kf44=\E[], kf45=\E[\014kf46=\E[_, kf47=\E[`, + kf48=\E[{, kf5=\E[Q, kf6=\E[R, kf7=\E[S, kf8=\E[T, kf9=\E[U, + khome=\E[H, kich1=\E[L, knp=\E[G, kpp=\E[I, krdo=\E[F, + ri=\E[T, + use=klone+sgr-dumb, + +# This actually describes the generic SVr4 display driver for Intel boxes. +# The <dim=\E[2m> isn't documented and therefore may not be reliable. +# From: Eric Raymond <esr@snark.thyrsus.com> Mon Nov 27 19:00:53 EST 1995 +att6386|at386|386at|AT&T WGS 6386 console, + am, bw, eo, xon, + cols#80, it#8, lines#25, + acsc=``a1fxgqh0jYk?lZm@nEooppqDrrsstCu4vAwBx3yyzz{{||}}~~, + bel=^G, blink=\E[5m, bold=\E[1m, cbt=\E[Z, civis=\E[=C, + clear=\E[2J\E[H, cnorm=\E[=1C, cr=^M, cub=\E[%p1%dD, + cub1=\E[D, cud=\E[%p1%dB, cud1=\E[B, cuf=\E[%p1%dC, + cuf1=\E[C, cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA, + cuu1=\E[A, dch=\E[%p1%dP, dch1=\E[P, dim=\E[2m, + dl=\E[%p1%dM, dl1=\E[1M, ech=\E[%p1%dX, ed=\E[J, el=\E[K, + home=\E[H, hpa=\E[%i%p1%dG, ht=^I, hts=\EH, ich=\E[%p1%d@, + ich1=\E[1@, il=\E[%p1%dL, il1=\E[1L, ind=\E[S, + indn=\E[%p1%dS, invis=\E[9m, is2=\E[0;10;39m, kbs=^H, + kcbt=^], kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A, + kdch1=\E[P, kend=\E[Y, kf1=\EOP, kf10=\EOY, kf11=\EOZ, + kf12=\EOA, kf2=\EOQ, kf3=\EOR, kf4=\EOS, kf5=\EOT, kf6=\EOU, + kf7=\EOV, kf8=\EOW, kf9=\EOX, khome=\E[H, kich1=\E[@, + knp=\E[U, kpp=\E[V, krmir=\E0, nel=\r\E[S, rc=\E8, rev=\E[7m, + ri=\E[T, rin=\E[%p1%dT, rmacs=\E[10m, rmso=\E[m, rmul=\E[m, + sc=\E7, + sgr=\E[10m\E[0%?%p1%p3%|%t;7%;%?%p2%t;4%;%?%p4%t;5%;%?%p5%t;2%;%?%p6%t;1%;%?%p9%t;12%e;10%;%?%p7%t;9%;m, + sgr0=\E[0;10m, smacs=\E[12m, smso=\E[7m, smul=\E[4m, + tbc=\E[2g, vpa=\E[%i%p1%dd, + use=klone+color, +# (pc6300plus: removed ":KM=/usr/lib/ua/kmap.s5:"; renamed BO/EE/CI/CV -- esr) +pc6300plus|AT&T 6300 plus, + am, xon, + cols#80, lines#24, + bel=^G, blink=\E[5m, bold=\E[1m, civis=\E[=C, + clear=\E[2J\E[H, cnorm=\E[=1C, cr=^M, cub1=^H, cud1=\E[B, + cuf1=\E[C, cup=\E[%i%p1%2d;%p2%2dH, cuu1=\E[A, + dch1=\E[1P, dim=\E[2m, dl1=\E[1M, ed=\E[0J, el=\E[0K, + home=\E[H, hts=\EH, ich1=\E[1@, il1=\E[1L, ind=^J, + invis=\E[9m, kbs=^H, kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C, + kcuu1=\E[A, kf1=\EOc, kf10=\EOu, kf2=\EOd, kf3=\EOe, + kf4=\EOf, kf5=\EOg, kf6=\EOh, kf7=\EOi, kf8=\EOj, kf9=\EOk, + nel=^M^J, rev=\E[7m, rmso=\E[m, rmul=\E[m, sgr0=\E[m, + smso=\E[7m, smul=\E[4m, tbc=\E[3g, + +# From: Benjamin C. W. Sittler <bsittler@nmt.edu> +# +# I have a UNIX PC which I use as a terminal attached to my Linux PC. +# Unfortunately, the UNIX PC terminfo entry that comes with ncurses +# is broken. All the special key sequences are broken, making it unusable +# with Emacs. The problem stems from the following: +# +# The UNIX PC has a plethora of keys (103 of them, and there's no numeric +# keypad!), loadable fonts, and strange highlighting modes ("dithered" +# half-intensity, "smeared" bold, and real strike-out, for example.) It also +# uses resizable terminal windows, but the bundled terminal program always +# uses an 80x24 window (and doesn't support seem to support a 132-column +# mode.) +# +# HISTORY: The UNIX PC was one of the first machines with a GUI, and used a +# library which was a superset of SVr3.5 curses (called tam, for "terminal +# access method".) tam includes support for real, overlapping windows, +# onscreen function key labels, and bitmap graphics. But since the primary +# user interface on the UNIX PC was a GUI program (ua, for "user +# assistant",) and remote administration was considered important for the +# machine, tam also supported VT100-compatible terminals attached to the +# serial port or used across the StarLan network. To simulate the extra keys +# not present on a VT100, users could press ESC and a two-letter sequence, +# such as u d (Undo) or U D (Shift-Undo.) These two-letter sequences, +# however, were not the same as those sent by the actual Undo key. The +# actual Undo key sends ESC 0 s unshifted, and ESC 0 S shifted, for example. +# (If you're interested in adding some of the tam calls to ncurses, btw, I +# have the full documentation and several programs which use tam. It also +# used an extended terminfo format to describe key sequences, special +# highlighting modes, etc.) +# +# KEYS: This means that ncurses would quite painful on the UNIX PC, since +# there are two sequences for every key-modifier combination (local keyboard +# sequence and remote "VT100" sequence.) But I doubt many people are trying +# to use ncurses on the UNIX PC, since ncurses doesn't properly handle the +# GUI. Unfortunately, the terminfo entry (and the termcap, too, I presume) +# seem to have been built from the manual describing the VT100 sequences. +# This means it doesn't work for a real live UNIX PC. +# +# FONTS: The UNIX PC also has a strange interpretation of "alternate +# character set". Rather than the VT100 graphics you might expect, it allows +# up to 8 custom fonts to be loaded at any given time. This means that +# programs expecting VT100 graphics will usually be disappointed. For this +# reason I have disabled the smacs/rmacs sequences, but they could easily be +# re-enabled. Here are the relevant control sequences (from the ESCAPE(7) +# manpage), should you wish to do so: +# +# SGR10 - Select font 0 - ESC [ 10 m or SO +# SGR11 - Select font 1 - ESC [ 11 m or SI +# SGR12 - Select font 2 - ESC [ 12 m +# ... (etc.) +# SGR17 - Select font 7 - ESC [ 17 m +# +# Graphics for line drawing are not reliably found at *any* character +# location because the UNIX PC has dynamically reloadable fonts. I use font +# 0 for regular text and font 1 for italics, but this is by no means +# universal. So ASCII line drawing is in order if smacs/rmacs are enabled. +# +# MISC: The cursor visible/cursor invisible sequences were swapped in the +# distributed terminfo. +# +# To ameliorate these problems (and fix a few highlighting bugs) I rewrote +# the UNIX PC terminfo entry. The modified version works great with Lynx, +# Emacs, and XEmacs running on my Linux PC and displaying on the UNIX PC +# attached by serial cable. In Emacs, even the Undo key works, and many +# applications can now use the F1-F8 keys. +# +# esr's notes: +# Terminfo entry for the AT&T Unix PC 7300 +# from escape(7) in Unix PC 7300 Manual. +# Somewhat similar to a vt100-am (but different enough +# to redo this from scratch.) +# +# /*************************************************************** +# * +# * FONT LOADING PROGRAM FOR THE UNIX PC +# * +# * This routine loads a font defined in the file ALTFONT +# * into font memory slot #1. Once the font has been loaded, +# * it can be used as an alternative character set. +# * +# * The call to ioctl with the argument WIOCLFONT is the key +# * to this routine. For more information, see window(7) in +# * the PC 7300 documentation. +# ***************************************************************/ +# #include <string.h> /* needed for strcpy call */ +# #include <sys/window.h> /* needed for ioctl call */ +# #define FNSIZE 60 /* font name size */ +# #define ALTFONT "/usr/lib/wfont/special.8.ft" /* font file */ +# /* +# * The file /usr/lib/wfont/special.8.ft comes with the +# * standard PC software. It defines a graphics character set +# * similar to that of the Teletype 5425 terminal. To view +# * this or other fonts in /usr/lib/wfont, use the command +# * cfont <filename>. For further information on fonts see +# * cfont(1) in the PC 7300 documentation. +# */ +# +# struct altfdata /* structure for alt font data */ +# { +# short altf_slot; /* memory slot number */ +# char altf_name[FNSIZE]; /* font name (file name) */ +# }; +# ldfont() +# { +# int wd; /* window in which altfont will be */ +# struct altfdata altf; +# altf.altf_slot=1; +# strcpy(altf.altf_name,ALTFONT); +# for (wd =1; wd < 12; wd++) { +# ioctl(wd, WIOCLFONT,&altf); +# } +# } +# +# (att7300: added <civis>/<cnorm>/<ich1>/<invis> from the BSDI entry, +# they're confirmed by the man page for the System V display---esr) +# +att7300|unixpc|pc7300|3b1|s4|AT&T UNIX PC Model 7300, + am, xon, + cols#80, it#8, lines#24, + bel=^G, blink=\E[9m, bold=\E[1m, cbt=\E^I, civis=\E[=1C, + clear=\E[2J\E[H, cnorm=\E[=0C, cr=^M, cub=\E[%p1%dD, + cub1=^H, cud=\E[%p1%dB, cud1=\E[B, cuf=\E[%p1%dC, + cuf1=\E[C, cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA, + cuu1=\E[A, dch1=\E[P, dim=\E[2m, dl=\E[%p1%dM, dl1=\E[M, + ed=\E[0J, el=\E[0K, home=\E[H, ich1=\E[@, il=\E[%p1%dL, + il1=\E[L, ind=^J, invis=\E[9m, is1=\017\E[=1w, kBEG=\ENB, + kCAN=\EOW, kCPY=\END, kCRT=\EON, kDC=\ENF, kDL=\ENE, + kEND=\ENN, kEOL=\EOA, kFND=\EOX, kHLP=\EOM, kHOM=\ENM, + kIC=\ENJ, kLFT=\ENK, kMOV=\ENC, kNXT=\ENH, kOPT=\EOR, + kPRV=\ENG, kRDO=\EOT, kRIT=\ENL, kRPL=\EOY, kSAV=\EOO, + kUND=\EOS, kbeg=\ENb, kbs=^H, kcan=\EOw, kcbt=\E[Z, + kclo=\EOV, kclr=\E[J, kcmd=\EOu, kcpy=\ENd, kcrt=\EOn, + kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A, kdch1=\ENf, + ked=\E[J, kel=\EOa, kend=\E0, kext=\EOk, kf1=\EOc, kf2=\EOd, + kf3=\EOe, kf4=\EOf, kf5=\EOg, kf6=\EOh, kf7=\EOi, kf8=\EOj, + kfnd=\EOx, khlp=\EOm, khome=\E[H, kich1=\ENj, kind=\E[B, + kmov=\ENc, kmrk=\ENi, knp=\E[U, knxt=\ENh, kopn=\EOv, + kopt=\EOr, kpp=\E[V, kprt=\EOz, kprv=\ENg, krdo=\EOt, + kref=\EOb, krfr=\ENa, kri=\E[A, krpl=\EOy, krst=\EOB, + ksav=\EOo, kslt=\ENI, kund=\EOs, nel=\EE, rev=\E[7m, ri=\EM, + rmso=\E[m, rmul=\E[m, sgr0=\E[0;10m, smso=\E[7m, + smul=\E[4m, + +# Sent by Stefan Stapelberg <stefan@rent-a-guru.de>, 24 Feb 1997, this is +# from SGI's terminfo database. SGI's entry shows F9-F12 with the codes +# for the application keypad mode. We have added iris-ansi-ap rather than +# change the original to keypad mode. +# +# (iris-ansi: added rmam/smam based on init string -- esr) +# +# This entry, and those derived from it, is used in xwsh (also known as +# winterm). Some capabilities that do not fit into the terminfo model +# include the shift- and control-functionkeys: +# +# F1-F12 generate different codes when shift or control modifiers are used. +# For example: +# F1 \E[001q +# shift F1 \E[013q +# control-F1 \E[025q +# +# In application keypad mode, F9-F12 generate codes like vt100 PF1-PF4, i.e., +# \EOP to \EOS. The shifted and control modifiers still do the same thing. +# +# The cursor keys also have different codes: +# control-up \E[162q +# control-down \E[165q +# control-left \E[159q +# control-right \E[168q +# +# shift-up \E[161q +# shift-down \E[164q +# shift-left \E[158q +# shift-right \E[167q +# +# control-tab \[072q +# +iris-ansi|IRIS emulating 40 line ANSI terminal (almost VT100), + am, + cols#80, it#8, lines#40, + bel=^G, bold=\E[1m, clear=\E[H\E[2J, + cnorm=\E[9/y\E[12/y\E[=6l, cr=^M, cub=\E[%p1%dD, + cub1=\E[D, cud=\E[%p1%dB, cud1=^J, cuf=\E[%p1%dC, + cuf1=\E[C, cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA, + cuu1=\E[A, cvvis=\E[10/y\E[=1h\E[=2l\E[=6h, + dl=\E[%p1%dM, dl1=\E[M, ed=\E[J, el=\E[K, el1=\E[1K, + home=\E[H, ht=^I, hts=\EH, il=\E[%p1%dL, il1=\E[L, ind=\ED, + is2=\E[?1l\E>\E[?7h\E[100g\E[0m\E7\E[r\E8, kDC=\E[P, + kEND=\E[147q, kHOM=\E[143q, kLFT=\E[158q, kPRT=\E[210q, + kRIT=\E[167q, kSPD=\E[218q, kbs=^H, kcbt=\E[Z, kcub1=\E[D, + kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A, kdch1=\177, + kend=\E[146q, kent=^M, kf1=\E[001q, kf10=\E[010q, + kf11=\E[011q, kf12=\E[012q, kf2=\E[002q, kf3=\E[003q, + kf4=\E[004q, kf5=\E[005q, kf6=\E[006q, kf7=\E[007q, + kf8=\E[008q, kf9=\E[009q, khome=\E[H, kich1=\E[139q, + knp=\E[154q, kpp=\E[150q, kprt=\E[209q, krmir=\E[146q, + kspd=\E[217q, nel=\EE, pfkey=\EP101;%p1%d.y%p2%s\E\\, + rc=\E8, rev=\E[7m, ri=\EM, rmam=\E[?7l, rmso=\E[m, rmul=\E[m, + sc=\E7, sgr0=\E[m, smam=\E[?7h, smso=\E[1;7m, smul=\E[4m, + tbc=\E[3g, +iris-ansi-ap|IRIS ANSI in application-keypad mode, + is2=\E[?1l\E=\E[?7h, kent=\EOM, kf10=\E[010q, + kf11=\E[011q, kf12=\E[012q, kf9=\E[009q, + use=iris-ansi, + +# From the man-page, this is a quasi-vt100 emulator that runs on SGI's IRIX +# (T.Dickey 98/1/24) +iris-color|xwsh|IRIX ANSI with color, + ncv#33, + csr=\E[%i%p1%d;%p2%dr, dch=\E[%p1%dP, dim=\E[2m, + ech=\E[%p1%dX, ich=\E[%p1%d@, rc=\E8, ritm=\E[23m, + rmul=\E[24m, rs1=\Ec, + rs2=\E>\E[?3l\E[?4l\E[?5l\E[?7h\E[?8h, sc=\E7, + sitm=\E[3m, u6=\E[%i%d;%dR, u7=\E[6n, u8=\E[?1;2c, u9=\E[c, + use=klone+color, use=iris-ansi-ap, + +# The following is a version of the ibm-pc entry distributed with PC/IX, +# (Interactive Systems' System 3 for the Big Blue), modified by Richard +# McIntosh at UCB/CSM. The :pt: and :uc: have been removed from the original, +# (the former is untrue, and the latter failed under UCB/man); standout and +# underline modes have been added. Note: this entry describes the "native" +# capabilities of the PC monochrome display, without ANY emulation; most +# communications packages (but NOT PC/IX connect) do some kind of emulation. +pcix|PC/IX console, + am, bw, eo, + cols#80, lines#24, + clear=\Ec, cub1=^H, cud1=\E[B, cuf1=\E[C, + cup=\E[%i%p1%2d;%p2%2dH, cuu1=\E[A, ed=\E[J, el=\E[K, + home=\E[H, rmso=\E[m, rmul=\E[m, sgr0=\E[m, smso=\E[7m, + smul=\E[4m, + +# (ibmpcx: this entry used to be known as ibmx. +# It formerly included the following extension capabilities: +# :GC=b:GL=v:GR=t:RT=^J:\ +# :GH=\E[196g:GV=\E[179g:\ +# :GU=\E[193g:GD=\E[194g:\ +# :G1=\E[191g:G2=\E[218g:G3=\E[192g:G4=\E[217g:\ +# :CW=\E[E:NU=\E[F:RF=\E[G:RC=\E[H:\ +# :WL=\E[K:WR=\E[L:CL=\E[M:CR=\E[N:\ +# I renamed GS/GE/WL/WR/CL/CR/PU/PD/HM/EN; also, removed a duplicate +# ":kh=\E[Y:". Added IBM-PC forms characters and highlights, they match +# what was there before. -- esr) +ibmpcx|xenix|ibmx|IBM PC xenix console display, + am, msgr, + cols#80, lines#25, + clear=^L, cub1=^H, cud1=\E[B, cuf1=\E[C, + cup=\E[%p1%d;%p2%dH, cuu1=\E[A, dch1=\E[P, dl1=\E[M, + ed=\E[J, el=\E[K, home=\E[H, ich1=\E[@, il1=\E[L, kbs=^H, + kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A, kend=\E[d, + kf1=\E[K, kf2=\E[L, kf3=\E[M, kf4=\E[N, khome=\E[Y, knp=\E[e, + kpp=\E[Z, + use=klone+acs, use=klone+sgr, + + +# QNX 4.0 Console +# Michael's original version of this entry had <am@>, <smcup=\Ei>, +# <rmcup=\Eh\ER>; this was so terminfo applications could write the lower +# right corner without triggering a scroll. The ncurses terminfo library can +# handle this case with the <ich1> capability, and prefers <am> for better +# optimization. Bug: The <op> capability resets attributes. +# From: Michael Hunter <mphunter@qnx.com> 30 Jul 1996 +# (removed: <sgr=%?%p1%t\E<%;%p2%t\E[%;%p3%t\E(%;%p4%t\E{%;%p6%t\E<%;,>) +qnx|qnx4|qnx console, + daisy, km, mir, msgr, xhpa, xt, + colors#8, cols#80, it#4, lines#25, ncv#3, pairs#8, + acsc=O\333a\261j\331k\277l\332m\300n\305o\337q\304s\334t\303u\264v\301w\302x\263, + bel=^G, blink=\E{, bold=\E<, civis=\Ey0, clear=\EH\EJ, + cnorm=\Ey1, cr=^M, cub1=^H, cud1=^J, cuf1=\EC, + cup=\EY%p1%{32}%+%c%p2%{32}%+%c, cuu1=\EA, cvvis=\Ey2, + dch1=\Ef, dl1=\EF, ed=\EJ, el=\EK, home=\EH, ht=^I, ich1=\Ee, + il1=\EE, ind=^J, kBEG=\377\356, kCAN=\377\263, + kCMD=\377\267, kCPY=\377\363, kCRT=\377\364, + kDL=\377\366, kEND=\377\301, kEOL=\377\311, + kEXT=\377\367, kFND=\377\370, kHLP=\377\371, + kHOM=\377\260, kIC=\377\340, kLFT=\377\264, + kMOV=\377\306, kMSG=\377\304, kNXT=\377\272, + kOPT=\377\372, kPRT=\377\275, kPRV=\377\262, + kRDO=\377\315, kRES=\377\374, kRIT=\377\266, + kRPL=\377\373, kSAV=\377\307, kSPD=\377\303, + kUND=\377\337, kbeg=\377\300, kcan=\377\243, kcbt=\377\0, + kclo=\377\343, kclr=\377\341, kcmd=\377\245, + kcpy=\377\265, kcrt=\377\305, kctab=\377\237, + kcub1=\377\244, kcud1=\377\251, kcuf1=\377\246, + kcuu1=\377\241, kdch1=\377\254, kdl1=\377\274, + ked=\377\314, kel=\377\310, kend=\377\250, kent=\377\320, + kext=\377\270, kf1=\377\201, kf10=\377\212, + kf11=\377\256, kf12=\377\257, kf13=\377\213, + kf14=\377\214, kf15=\377\215, kf16=\377\216, + kf17=\377\217, kf18=\377\220, kf19=\377\221, + kf2=\377\202, kf20=\377\222, kf21=\377\223, + kf22=\377\224, kf23=\377\333, kf24=\377\334, + kf25=\377\225, kf26=\377\226, kf27=\377\227, + kf28=\377\230, kf29=\377\231, kf3=\377\203, + kf30=\377\232, kf31=\377\233, kf32=\377\234, + kf33=\377\235, kf34=\377\236, kf35=\377\276, + kf36=\377\277, kf37=\377\321, kf38=\377\322, + kf39=\377\323, kf4=\377\204, kf40=\377\324, + kf41=\377\325, kf42=\377\326, kf43=\377\327, + kf44=\377\330, kf45=\377\331, kf46=\377\332, + kf47=\377\316, kf48=\377\317, kf5=\377\205, kf6=\377\206, + kf7=\377\207, kf8=\377\210, kf9=\377\211, kfnd=\377\346, + khlp=\377\350, khome=\377\240, khts=\377\342, + kich1=\377\253, kil1=\377\273, kind=\377\261, + kmov=\377\351, kmrk=\377\355, kmsg=\377\345, + knp=\377\252, knxt=\377\312, kopn=\377\357, + kopt=\377\353, kpp=\377\242, kprt=\377\255, + kprv=\377\302, krdo=\377\336, kref=\377\354, + kres=\377\360, krfr=\377\347, kri=\377\271, + krmir=\377\313, krpl=\377\362, krst=\377\352, + ksav=\377\361, kslt=\377\247, kspd=\377\335, + ktbc=\377\344, kund=\377\365, mvpa=\E!%p1%02d, op=\ER, + rep=\Eg%p2%{32}%+%c%p1%c, rev=\E(, ri=\EI, rmcup=\Eh\ER, + rmso=\E), rmul=\E], rs1=\ER, setb=\E@%p1%Pb%gb%gf%d%d, + setf=\E@%p1%Pf%gb%gf%d%d, sgr0=\E}\E]\E>\E), smcup=\Ei, + smso=\E(, smul=\E[, + +# From: Federico Bianchi <bianchi@pc-arte2.arte.unipi.it>, 1 Jul 1998 +# (esr: commented out <scp> and <rmcup> to avoid warnings.) +# (TD: derive from original qnx4 entry) +qnxt2|qnx 2.15 serial terminal, + am, + civis@, cnorm@, cvvis@, dch1@, ich1@, kRES@, kRPL@, kUND@, kspd@, + rep@, rmcup@, rmso=\E>, setb@, setf@, smcup@, smso=\E<, + use=qnx4, + +#### NetBSD consoles +# +# pcvt termcap database entries (corresponding to release 3.31) +# Author's last edit-date: [Fri Sep 15 20:29:10 1995] +# +# (For the terminfo master file, I translated these into terminfo syntax. +# Then I dropped all the pseudo-HP entries. we don't want and can't use +# the :Xs: flag. Then I split :is: into a size-independent <is1> and a +# size-dependent <is2>. Finally, I added <rmam>/<smam> -- esr) + +# NOTE: <ich1> has been taken out of this entry. for reference, it should +# be <ich1=\E[@>. For discussion, see ICH/ICH1 VERSUS RMIR/SMIR below. +# (esr: added <civis> and <cnorm> to resolve NetBSD Problem Report #4583) +pcvtXX|pcvt vt200 emulator (DEC VT220), + am, km, mir, msgr, xenl, + it#8, vt#3, + acsc=++\,\,--..00``aaffgghhiijjkkllmmnnooppqqrrssttuuvvwwxxyyzz~~, + bel=^G, blink=\E[5m, bold=\E[1m, civis=\E[?25l, + clear=\E[H\E[J, cnorm=\E[?25h, cr=^M, + csr=\E[%i%p1%d;%p2%dr, cub=\E[%p1%dD, cub1=^H, + cud=\E[%p1%dB, cud1=\E[B, cuf=\E[%p1%dC, cuf1=\E[C, + cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA, cuu1=\E[A, + dch=\E[%p1%dP, dch1=\E[P, dl=\E[%p1%dM, dl1=\E[M, ed=\E[J, + el=\E[K, el1=\E[1K, home=\E[H, ht=^I, hts=\EH, ich=\E[%p1%d@, + il=\E[%p1%dL, il1=\E[L, ind=\ED, indn=\E[%p1%dS, + is1=\E>\E[?3l\E[?4l\E[?5l\E[?7h\E[?8h, kbs=\177, + kcub1=\EOD, kcud1=\EOB, kcuf1=\EOC, kcuu1=\EOA, + kdch1=\E[3~, kf1=\E[17~, kf2=\E[18~, kf3=\E[19~, + kf4=\E[20~, kf5=\E[21~, kf6=\E[23~, kf7=\E[24~, kf8=\E[25~, + khome=\E[1~, kich1=\E[2~, kll=\E[4~, knp=\E[6~, kpp=\E[5~, + nel=\EE, rc=\E8, rev=\E[7m, rf=/usr/share/tabset/vt100, + ri=\EM, rin=\E[%p1%dT, rmacs=\E(B, rmam=\E[?7l, rmir=\E[4l, + rmkx=\E[?1l\E>, rmso=\E[27m, rmul=\E[24m, + rs1=\Ec\E>\E[?3l\E[?4l\E[?5l\E[?7h\E[?8h, sc=\E7, + sgr0=\E[m, smacs=\E(0, smam=\E[?7h, smir=\E[4h, + smkx=\E[?1h\E=, smso=\E[7m, smul=\E[4m, tbc=\E[3g, + +# NetBSD/FreeBSD vt220 terminal emulator console (pc keyboard & monitor) +# termcap entries for pure VT220-Emulation and 25, 28, 35, 40, 43 and +# 50 lines entries; 80 columns +pcvt25|dec vt220 emulation with 25 lines, + cols#80, lines#25, + is2=\E[1;25r\E[25;1H, use=pcvtXX, +pcvt28|dec vt220 emulation with 28 lines, + cols#80, lines#28, + is2=\E[1;28r\E[28;1H, use=pcvtXX, +pcvt35|dec vt220 emulation with 35 lines, + cols#80, lines#35, + is2=\E[1;35r\E[35;1H, use=pcvtXX, +pcvt40|dec vt220 emulation with 40 lines, + cols#80, lines#40, + is2=\E[1;40r\E[40;1H, use=pcvtXX, +pcvt43|dec vt220 emulation with 43 lines, + cols#80, lines#43, + is2=\E[1;43r\E[43;1H, use=pcvtXX, +pcvt50|dec vt220 emulation with 50 lines, + cols#80, lines#50, + is2=\E[1;50r\E[50;1H, use=pcvtXX, + +# NetBSD/FreeBSD vt220 terminal emulator console (pc keyboard & monitor) +# termcap entries for pure VT220-Emulation and 25, 28, 35, 40, 43 and +# 50 lines entries; 132 columns +pcvt25w|dec vt220 emulation with 25 lines and 132 cols, + cols#132, lines#25, + is2=\E[1;25r\E[25;1H, use=pcvtXX, +pcvt28w|dec vt220 emulation with 28 lines and 132 cols, + cols#132, lines#28, + is2=\E[1;28r\E[28;1H, use=pcvtXX, +pcvt35w|dec vt220 emulation with 35 lines and 132 cols, + cols#132, lines#35, + is2=\E[1;35r\E[35;1H, use=pcvtXX, +pcvt40w|dec vt220 emulation with 40 lines and 132 cols, + cols#132, lines#40, + is2=\E[1;40r\E[40;1H, use=pcvtXX, +pcvt43w|dec vt220 emulation with 43 lines and 132 cols, + cols#132, lines#43, + is2=\E[1;43r\E[43;1H, use=pcvtXX, +pcvt50w|dec vt220 emulation with 50 lines and 132 cols, + cols#132, lines#50, + is2=\E[1;50r\E[50;1H, use=pcvtXX, + +# Terminfo entries to enable the use of the ncurses library in colour on a +# NetBSD-arm32 console (only tested on a RiscPC). +# Created by Dave Millen <dmill@globalnet.co.uk> 22.07.98 +# modified codes for setf/setb to setaf/setab, then to klone+color, corrected +# typo in invis - TD +arm100|arm100-am|Arm(RiscPC) ncurses compatible (for 640x480), + am, bce, msgr, xenl, xon, + cols#80, it#8, lines#30, + acsc=``aaffggjjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~, + bel=^G, blink=\E[5m$<2>, bold=\E[1m$<2>, + clear=\E[H\E[J$<50>, cr=^M, csr=\E[%i%p1%d;%p2%dr, + cub=\E[%p1%dD, cub1=^H, cud=\E[%p1%dB, cud1=^J, + cuf=\E[%p1%dC, cuf1=\E[C$<2>, + cup=\E[%i%p1%d;%p2%dH$<5>, cuu=\E[%p1%dA, + cuu1=\E[A$<2>, ed=\E[J$<50>, el=\E[K$<3>, el1=\E[1K$<3>, + enacs=\E(B\E)0, home=\E[H, ht=^I, hts=\EH, ind=^J, + invis=\E[8m$<2>, ka1=\E[q, ka3=\E[s, kb2=\E[r, kbs=^H, + kc1=\E[p, kc3=\E[n, kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C, + kcuu1=\E[A, kent=\E[M, kf0=\E[y, kf1=\E[P, kf10=\E[x, + kf2=\E[Q, kf3=\E[R, kf4=\E[S, kf5=\E[t, kf6=\E[u, kf7=\E[v, + kf8=\E[l, kf9=\E[w, rc=\E8, rev=\E[6m$<2>, ri=\EM$<5>, + rmacs=^O, rmam=\E[?7l, rmkx=\E[?1l\E>, rmso=\E[m$<2>, + rmul=\E[m$<2>, rs2=\E>\E[?3l\E[?4l\E[?5l\E[?7h\E[?8h, + sc=\E7, + sgr=\E[0%?%p1%p6%|%t;1%;%?%p2%t;4%;%?%p1%p3%|%t;7%;%?%p4%t;5%;m%?%p9%t\016%e\017%;, + sgr0=\E[m\017$<2>, smacs=^N, smam=\E[?7h, smkx=\E[?1h\E=, + smso=\E[7m$<2>, smul=\E[4m$<2>, tbc=\E[3g, + use=ecma+sgr, use=klone+color, + +arm100-w|arm100-wam|Arm(RiscPC) ncurses compatible (for 1024x768), + cols#132, lines#50, use=arm100, + +# NetBSD/x68k console vt200 emulator. This port runs on a 68K machine +# manufactured by Sharp for the Japenese market. +# From Minoura Makoto <minoura@netlaputa.or.jp>, 12 May 1996 +x68k|x68k-ite|NetBSD/x68k ITE, + cols#96, lines#32, + kclr=\E[9~, khlp=\E[28~, use=vt220, + +#### FreeBSD console entries +# +# From: Andrey Chernov <ache@astral.msk.su> 29 Mar 1996 +# Andrey Chernov maintains the FreeBSD termcap distributions. +# +# Note: Users of FreeBSD 2.1.0 and older versions must either upgrade +# or comment out the :cb: capability in the console entry. +# +# Alexander Lukyanov reports: +# I have seen FreeBSD-2.1.5R... The old el1 bug changed, but it is still there. +# Now el1 clears not only to the line beginning, but also a large chunk +# of previous line. But there is another bug - ech does not work at all. +# + +# for syscons +# common entry without semigraphics +# Bug: The <op> capability resets attributes. +# Bug? The ech and el1 attributes appear to move the cursor in some cases; for +# instance el1 does if the cursor is moved to the right margin first. Removed +# by T.Dickey 97/5/3 (ech=\E[%p1%dX, el1=\E[1K) +# +# Setting colors turns off reverse; we cannot guarantee order, so use ncv. +# Note that this disables standout with color. +cons25w|ansiw|ansi80x25-raw|freebsd console (25-line raw mode), + am, bce, bw, eo, msgr, npc, + colors#8, cols#80, it#8, lines#25, ncv#5, pairs#64, + bel=^G, blink=\E[5m, bold=\E[1m, cbt=\E[Z, clear=\E[H\E[J, + cr=^M, cub=\E[%p1%dD, cub1=^H, cud=\E[%p1%dB, cud1=\E[B, + cuf=\E[%p1%dC, cuf1=\E[C, cup=\E[%i%p1%d;%p2%dH, + cuu=\E[%p1%dA, cuu1=\E[A, dch=\E[%p1%dP, dch1=\E[P, + dim=\E[30;1m, dl=\E[%p1%dM, dl1=\E[M, ed=\E[J, el=\E[K, + home=\E[H, hpa=\E[%i%p1%d`, ht=^I, ich=\E[%p1%d@, + ich1=\E[@, il=\E[%p1%dL, il1=\E[L, ind=\E[S, + indn=\E[%p1%dS, kb2=\E[E, kbs=^H, kcbt=\E[Z, kcub1=\E[D, + kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A, kdch1=\177, kend=\E[F, + kf1=\E[M, kf10=\E[V, kf11=\E[W, kf12=\E[X, kf2=\E[N, + kf3=\E[O, kf4=\E[P, kf5=\E[Q, kf6=\E[R, kf7=\E[S, kf8=\E[T, + kf9=\E[U, khome=\E[H, kich1=\E[L, knp=\E[G, kpp=\E[I, + nel=\E[E, op=\E[x, rev=\E[7m, ri=\E[T, rin=\E[%p1%dT, + rmso=\E[m, rs1=\E[x\E[m\Ec, setab=\E[4%p1%dm, + setaf=\E[3%p1%dm, sgr0=\E[m, smso=\E[7m, vpa=\E[%i%p1%dd, +cons25|ansis|ansi80x25|freebsd console (25-line ansi mode), + acsc=-\030.^Y0\333`\004a\260f\370g\361h\261i\025j\331k\277l\332m\300n\305q\304t\303u\264v\301w\302x\263y\363z\362~\371, + use=cons25w, +cons25-m|ansis-mono|ansi80x25-mono|freebsd console (25-line mono ansi mode), + colors@, pairs@, + bold@, dim@, op@, rmul=\E[m, setab@, setaf@, smul=\E[4m, use=cons25, +cons30|ansi80x30|freebsd console (30-line ansi mode), + lines#30, use=cons25, +cons30-m|ansi80x30-mono|freebsd console (30-line mono ansi mode), + lines#30, use=cons25-m, +cons43|ansi80x43|freebsd console (43-line ansi mode), + lines#43, use=cons25, +cons43-m|ansi80x43-mono|freebsd console (43-line mono ansi mode), + lines#43, use=cons25-m, +cons50|ansil|ansi80x50|freebsd console (50-line ansi mode), + lines#50, use=cons25, +cons50-m|ansil-mono|ansi80x50-mono|freebsd console (50-line mono ansi mode), + lines#50, use=cons25-m, +cons60|ansi80x60|freebsd console (60-line ansi mode), + lines#60, use=cons25, +cons60-m|ansi80x60-mono|freebsd console (60-line mono ansi mode), + lines#60, use=cons25-m, +cons25r|pc3r|ibmpc3r|cons25-koi8-r|freebsd console w/koi8-r cyrillic, + acsc=-\030.^Y0\215`\004a\220f\234h\221i\025j\205k\203l\202m\204n\212q\0t\206u\207v\211w\210x\201y\230z\231~\225, + use=cons25w, +cons25r-m|pc3r-m|ibmpc3r-mono|cons25-koi8r-m|freebsd console w/koi8-r cyrillic (mono), + colors@, pairs@, + op@, rmul=\E[m, setab@, setaf@, smul=\E[4m, use=cons25r, +cons50r|cons50-koi8r|freebsd console w/koi8-r cyrillic (50 lines), + lines#50, use=cons25r, +cons50r-m|cons50-koi8r-m|freebsd console w/koi8-r cyrillic (50-line mono), + lines#50, use=cons25r-m, +cons60r|cons60-koi8r|freebsd console w/koi8-r cyrillic (60 lines), + lines#60, use=cons25r, +cons60r-m|cons60-koi8r-m|freebsd console w/koi8-r cyrillic (60-line mono), + lines#60, use=cons25r-m, +# ISO 8859-1 FreeBSD console +cons25l1|cons25-iso8859|freebsd console w/iso 8859-1 chars, + acsc=+\253\,\273-\030.\031`\201a\202f\207g\210i\247j\213k\214l\215m\216n\217o\220p\221q\222r\223s\224t\225u\226v\227w\230x\231y\232z\233~\237, + use=cons25w, +cons25l1-m|cons25-iso-m|freebsd console w/iso 8859-1 chars (mono), + colors@, pairs@, + bold@, dim@, op@, rmul=\E[m, setab@, setaf@, smul=\E[4m, use=cons25l1, +cons50l1|cons50-iso8859|freebsd console w/iso 8859-1 chars (50 lines), + lines#50, use=cons25l1, +cons50l1-m|cons50-iso-m|freebsd console w/iso 8859-1 chars (50-line mono), + lines#50, use=cons25l1-m, +cons60l1|cons60-iso|freebsd console w/iso 8859-1 chars (60 lines), + lines#60, use=cons25l1, +cons60l1-m|cons60-iso-m|freebsd console w/iso 8859-1 chars (60-line mono), + lines#60, use=cons25l1-m, + +#### 386BSD and BSD/OS Consoles +# + +# This was the original 386BSD console entry (I think). +# Some places it's named oldpc3|oldibmpc3. +# From: Alex R.N. Wetmore <aw2t@andrew.cmu.edu> +origpc3|origibmpc3|IBM PC 386BSD Console, + am, bw, eo, xon, + cols#80, lines#25, + acsc=j\331k\277l\332m\300n\305q\304t\303u\264v\301w\302x\263, + bold=\E[7m, clear=\Ec, cub1=^H, cud1=\E[B, cuf1=\E[C, + cup=\E[%i%p1%2d;%p2%2dH, cuu1=\E[A, ed=\E[J, el=\E[K, + home=\E[H, ind=\E[S, kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C, + kcuu1=\E[A, khome=\E[Y, ri=\E[T, rmso=\E[1;0x\E[2;7x, + rmul=\E[1;0x\E[2;7x, sgr0=\E[m\E[1;0x\E[2;7x, + smso=\E[1;7x\E[2;0x, smul=\E[1;7x\E[2;0x, + +# description of BSD/386 console emulator in version 1.0 (supplied by BSDI) +oldpc3|oldibmpc3|old IBM PC BSD/386 Console, + km, + lines#25, + bel=^G, bold=\E[=15F, cr=^M, cud1=^J, dim=\E[=8F, dl1=\E[M, + ht=^I, il1=\E[L, ind=^J, kbs=^H, kcub1=\E[D, kcud1=\E[B, + kcuf1=\E[C, kcuu1=\E[A, khome=\E[H, kich1=\E[L, kll=\E[F, + knp=\E[G, kpp=\E[I, nel=^M^J, sgr0=\E[=R, + +# Description of BSD/OS console emulator in version 1.1, 2.0, 2.1 +# Note, the emulator supports many of the additional console features +# listed in the iBCS2 (e.g. character-set selection) though not all +# are described here. This entry really ought to be upgraded. +# Also note, the console will also work with fewer lines after doing +# "stty rows NN", e.g. to use 24 lines. +# (Color support from Kevin Rosenberg <kevin@cyberport.com>, 2 May 1996) +# Bug: The <op> capability resets attributes. +bsdos-pc-nobold|BSD/OS PC console w/o bold, + am, eo, km, xon, + cols#80, it#8, lines#25, + bel=^G, clear=\Ec, cr=^M, cub=\E[%p1%dD, cub1=^H, + cud=\E[%p1%dB, cud1=^J, cuf=\E[%p1%dC, cuf1=\E[C, + cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA, cuu1=\E[A, + dl=\E[%p1%dM, dl1=\E[M, ed=\E[J, el=\E[K, home=\E[H, ht=^I, + il=\E[%p1%dL, il1=\E[L, ind=^J, kbs=^H, kcub1=\E[D, + kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A, khome=\E[H, kich1=\E[L, + kll=\E[F, knp=\E[G, kpp=\E[I, nel=^M^J, rc=\E8, sc=\E7, + sgr=\E[0;10%?%p1%t;7%;%?%p3%t;7%;%?%p4%t;5%;%?%p6%t;1%;%?%p7%t;8%;%?%p9%t;11%;m%?%p5%t\E[=8F%;, + use=klone+sgr, use=klone+color, +bsdos-pc|IBM PC BSD/OS Console, + sgr=\E[0;10%?%p1%t;7%;%?%p2%t;1%;%?%p3%t;7%;%?%p4%t;5%;%?%p6%t;1%;%?%p7%t;8%;%?%p9%t;11%;m, use=bsdos-pc-nobold, + +# Old names for BSD/OS PC console used in releases before 4.1. +pc3|BSD/OS on the PC Console, + use=bsdos-pc-nobold, +ibmpc3|pc3-bold|BSD/OS on the PC Console with bold instead of underline, + use=bsdos-pc, + +# BSD/OS on the SPARC +bsdos-sparc|Sun SPARC BSD/OS Console, + use=sun, + +# BSD/OS on the PowerPC +bsdos-ppc|PowerPC BSD/OS Console, + use=bsdos-pc, + +#### DEC VT100 and compatibles +# +# DEC terminals from the vt100 forward (and the vt52, way obsolete but still +# the basis of some emulations) are collected here. Older DEC terminals and +# micro consoles can be found in the `obsolete' section. More details on +# the relationship between the VT100 and ANSI X3.64/ISO 6429/ECMA-48 may be +# found near the end of this file. +# +# Except where noted, these entries are DEC's official terminfos. +# Contact Bill Hedberg <hedberg@hannah.enet.dec.com> of Terminal Support +# Engineering for more information. Updated terminfos and termcaps +# are kept available at ftp://gatekeeper.dec.com/pub/DEC/termcaps. +# +# In October 1995 DEC sold its terminals business, including the VT and Dorio +# line and trademark, to SunRiver Data Systems. SunRiver has since changed +# its name to Boundless Technologies; see http://www.boundless.com. +# + +# (<acsc>/<rmacs>/<smacs> capabilities aren't in DEC's official entry -- esr) +vt52|dec vt52, + cols#80, it#8, lines#24, + acsc=``aaffggjjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~, + bel=^G, clear=\EH\EJ, cr=^M, cub1=\ED, cud1=\EB, cuf1=\EC, + cup=\EY%p1%{32}%+%c%p2%{32}%+%c, cuu1=\EA, ed=\EJ, + el=\EK, home=\EH, ht=^I, ind=^J, kbs=^H, kcub1=\ED, kcud1=\EB, + kcuf1=\EC, kcuu1=\EA, nel=^M^J, ri=\EI, rmacs=\EG, smacs=\EF, + +# NOTE: Any VT100 emulation, whether in hardware or software, almost +# certainly includes what DEC called the `Level 1 editing extension' codes; +# only the very oldest VT100s lacked these and there probably aren't any of +# those left alive. To capture these, use one of the VT102 entries. +# +# Note that the <xenl> glitch in vt100 is not quite the same as on the Concept, +# since the cursor is left in a different position while in the +# weird state (concept at beginning of next line, vt100 at end +# of this line) so all versions of vi before 3.7 don't handle +# <xenl> right on vt100. The correct way to handle <xenl> is when +# you output the char in column 80, immediately output CR LF +# and then assume you are in column 1 of the next line. If <xenl> +# is on, am should be on too. +# +# I assume you have smooth scroll off or are at a slow enough baud +# rate that it doesn't matter (1200? or less). Also this assumes +# that you set auto-nl to "on", if you set it off use vt100-nam +# below. +# +# The padding requirements listed here are guesses. It is strongly +# recommended that xon/xoff be enabled, as this is assumed here. +# +# The vt100 uses <rs2> and <rf> rather than <is2>/<tbc>/<hts> because the +# tab settings are in non-volatile memory and don't need to be +# reset upon login. Also setting the number of columns glitches +# the screen annoyingly. You can type "reset" to get them set. +# +# Here's a diagram of the VT100 keypad keys with their bindings. +# The top line is the name of the key (some DEC keyboards have the keys +# labelled somewhat differently, like GOLD instead of PF1, but this is +# the most "official" name). The second line is the escape sequence it +# generates in Application Keypad mode (where "$" means the ESC +# character). The third line contains two items, first the mapping of +# the key in terminfo, and then in termcap. +# _______________________________________ +# | PF1 | PF2 | PF3 | PF4 | +# | $OP | $OQ | $OR | $OS | +# |_kf1__k1_|_kf2__k2_|_kf3__k3_|_kf4__k4_| +# | 7 8 9 - | +# | $Ow | $Ox | $Oy | $Om | +# |_kf9__k9_|_kf10_k;_|_kf0__k0_|_________| +# | 4 | 5 | 6 | , | +# | $Ot | $Ou | $Ov | $Ol | +# |_kf5__k5_|_kf6__k6_|_kf7__k7_|_kf8__k8_| +# | 1 | 2 | 3 | | +# | $Oq | $Or | $Os | enter | +# |_ka1__K1_|_kb2__K2_|_ka3__K3_| $OM | +# | 0 | . | | +# | $Op | $On | | +# |___kc1_______K4____|_kc3__K5_|_kent_@8_| +# +# And here, for those of you with orphaned VT100s lacking documentation, is +# a description of the soft switches invoked when you do `Set Up'. +# +# Scroll 0-Jump Shifted 3 0-# +# | 1-Smooth | 1-British pound sign +# | Autorepeat 0-Off | Wrap Around 0-Off +# | | 1-On | | 1-On +# | | Screen 0-Dark Bkg | | New Line 0-Off +# | | | 1-Light Bkg | | | 1-On +# | | | Cursor 0-Underline | | | Interlace 0-Off +# | | | | 1-Block | | | | 1-On +# | | | | | | | | +# 1 1 0 1 1 1 1 1 0 1 0 0 0 0 1 0 <--Standard Settings +# | | | | | | | | +# | | | Auto XON/XOFF 0-Off | | | Power 0-60 Hz +# | | | 1-On | | | 1-50 Hz +# | | Ansi/VT52 0-VT52 | | Bits Per Char. 0-7 Bits +# | | 1-ANSI | | 1-8 Bits +# | Keyclick 0-Off | Parity 0-Off +# | 1-On | 1-On +# Margin Bell 0-Off Parity Sense 0-Odd +# 1-On 1-Even +# +# The following SET-UP modes are assumed for normal operation: +# ANSI_MODE AUTO_XON/XOFF_ON NEWLINE_OFF 80_COLUMNS +# WRAP_AROUND_ON JUMP_SCROLL_OFF +# Other SET-UP modes may be set for operator convenience or communication +# requirements; I recommend +# AUTOREPEAT_ON BLOCK_CURSOR MARGIN_BELL_OFF SHIFTED_3_# +# Unless you have a graphics add-on such as Digital Engineering's VT640 +# (and even then, whenever it can be arranged!) you should set +# INTERLACE_OFF +# +# (vt100: I added <rmam>/<smam> based on the init string, also <OTbs>. -- esr) +vt100|vt100-am|dec vt100 (w/advanced video), + am, msgr, xenl, xon, + cols#80, it#8, lines#24, vt#3, + acsc=``aaffggjjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~, + bel=^G, blink=\E[5m$<2>, bold=\E[1m$<2>, + clear=\E[H\E[J$<50>, cr=^M, csr=\E[%i%p1%d;%p2%dr, + cub=\E[%p1%dD, cub1=^H, cud=\E[%p1%dB, cud1=^J, + cuf=\E[%p1%dC, cuf1=\E[C$<2>, + cup=\E[%i%p1%d;%p2%dH$<5>, cuu=\E[%p1%dA, + cuu1=\E[A$<2>, ed=\E[J$<50>, el=\E[K$<3>, el1=\E[1K$<3>, + enacs=\E(B\E)0, home=\E[H, ht=^I, hts=\EH, ind=^J, ka1=\EOq, + ka3=\EOs, kb2=\EOr, kbs=^H, kc1=\EOp, kc3=\EOn, kcub1=\EOD, + kcud1=\EOB, kcuf1=\EOC, kcuu1=\EOA, kent=\EOM, kf0=\EOy, + kf1=\EOP, kf10=\EOx, kf2=\EOQ, kf3=\EOR, kf4=\EOS, kf5=\EOt, + kf6=\EOu, kf7=\EOv, kf8=\EOl, kf9=\EOw, rc=\E8, + rev=\E[7m$<2>, ri=\EM$<5>, rmacs=^O, rmam=\E[?7l, + rmkx=\E[?1l\E>, rmso=\E[m$<2>, rmul=\E[m$<2>, + rs2=\E>\E[?3l\E[?4l\E[?5l\E[?7h\E[?8h, sc=\E7, + sgr=\E[0%?%p1%p6%|%t;1%;%?%p2%t;4%;%?%p1%p3%|%t;7%;%?%p4%t;5%;m%?%p9%t\016%e\017%;, + sgr0=\E[m\017$<2>, smacs=^N, smam=\E[?7h, smkx=\E[?1h\E=, + smso=\E[7m$<2>, smul=\E[4m$<2>, tbc=\E[3g, +vt100nam|vt100-nam|vt100 no automargins, + am@, xenl@, use=vt100-am, +vt100-vb|dec vt100 (w/advanced video) & no beep, + bel@, flash=\E[?5h\E[?5l, use=vt100, + +# Ordinary vt100 in 132 column ("wide") mode. +vt100-w|vt100-w-am|dec vt100 132 cols (w/advanced video), + cols#132, lines#24, + rs2=\E>\E[?3h\E[?4l\E[?5l\E[?8h, use=vt100-am, +vt100-w-nam|vt100-nam-w|dec vt100 132 cols (w/advanced video no automargin), + cols#132, lines#14, vt@, + rs2=\E>\E[?3h\E[?4l\E[?5l\E[?8h, use=vt100-nam, + +# vt100 with no advanced video. +vt100-nav|vt100 without advanced video option, + xmc#1, + blink@, bold@, rev@, rmso=\E[m, rmul@, sgr@, sgr0@, smso=\E[7m, + smul@, + use=vt100, +vt100-nav-w|vt100-w-nav|dec vt100 132 cols 14 lines (no advanced video option), + cols#132, lines#14, use=vt100-nav, + +# vt100 with one of the 24 lines used as a status line. +# We put the status line on the top. +vt100-s|vt100-s-top|vt100-top-s|vt100 for use with top sysline, + eslok, hs, + lines#23, + clear=\E[2;1H\E[J$<50>, csr=\E[%i%i%p1%d;%p2%dr, + cup=\E[%i%p1%{1}%+%d;%p2%dH$<5>, dsl=\E7\E[1;24r\E8, + fsl=\E8, home=\E[2;1H, is2=\E7\E[2;24r\E8, + tsl=\E7\E[1;%p1%dH\E[1K, use=vt100-am, + +# Status line at bottom. +# Clearing the screen will clobber status line. +vt100-s-bot|vt100-bot-s|vt100 for use with bottom sysline, + eslok, hs, + lines#23, + dsl=\E7\E[1;24r\E8, fsl=\E8, is2=\E[1;23r\E[23;1H, + tsl=\E7\E[24;%p1%dH\E[1K, + use=vt100-am, + +# Most of the `vt100' emulators out there actually emulate a vt102 +# This entry (or vt102-nsgr) is probably the right thing to use for +# these. +vt102|dec vt102, + mir, + dch1=\E[P, dl1=\E[M, il1=\E[L, rmir=\E[4l, smir=\E[4h, use=vt100, +vt102-w|dec vt102 in wide mode, + cols#132, + rs3=\E[?3h, use=vt102, + +# Many brain-dead PC comm programs that pretend to be `vt100-compatible' +# fail to interpret the ^O and ^N escapes properly. Symptom: the <sgr0> +# string in the canonical vt100 entry above leaves the screen littered +# with little snowflake or star characters (IBM PC ROM character \017 = ^O) +# after highlight turnoffs. This entry should fix that, and even leave +# ACS support working, at the cost of making multiple-highlight changes +# slightly more expensive. +# From: Eric S. Raymond <esr@snark.thyrsus.com> July 22 1995 +vt102-nsgr|vt102 no sgr (use if you see snowflakes after highlight changes), + sgr@, sgr0=\E[m, + use=vt102, + +# VT125 Graphics CRT. Clear screen also erases graphics +vt125|vt125 graphics terminal, + clear=\E[H\E[2J\EPpS(E)\E\\$<50>, use=vt100, + +# This isn't a DEC entry, it came from University of Wisconsin. +# (vt131: I added <rmam>/<smam> based on the init string, also <OTbs> -- esr) +vt131|dec vt131, + am, xenl, + cols#80, it#8, lines#24, vt#3, + bel=^G, blink=\E[5m$<2/>, bold=\E[1m$<2/>, + clear=\E[;H\E[2J$<50/>, cr=^M, csr=\E[%i%p1%d;%p2%dr, + cub1=^H, cud1=^J, cuf1=\E[C$<2/>, + cup=\E[%i%p1%d;%p2%dH$<5/>, cuu1=\E[A$<2/>, + ed=\E[J$<50/>, el=\E[K$<3/>, home=\E[H, ht=^I, + is2=\E[1;24r\E[24;1H, kbs=^H, kcub1=\EOD, kcud1=\EOB, + kcuf1=\EOC, kcuu1=\EOA, kf1=\EOP, kf2=\EOQ, kf3=\EOR, + kf4=\EOS, nel=^M^J, rc=\E8, rev=\E[7m$<2/>, ri=\EM$<5/>, + rmam=\E[?7h, rmkx=\E[?1l\E>, rmso=\E[m$<2/>, + rmul=\E[m$<2/>, + rs1=\E>\E[?3l\E[?4l\E[?5l\E[?7h\E[?8h, sc=\E7, + sgr0=\E[m$<2/>, smam=\E[?7h, smkx=\E[?1h\E=, + smso=\E[7m$<2/>, smul=\E[4m$<2/>, + +# vt132 - like vt100 but slower and has ins/del line and such. +# I'm told that <smir>/<rmir> are backwards in the terminal from the +# manual and from the ANSI standard, this describes the actual +# terminal. I've never actually used a vt132 myself, so this +# is untested. +# +vt132|DEC vt132, + xenl, + dch1=\E[P$<7>, dl1=\E[M$<99>, il1=\E[L$<99>, ind=\n$<30>, + ip=$<7>, rmir=\E[4h, smir=\E[4l, + use=vt100, + +# vt220: +# This vt220 description maps F5--F9 to the second block of function keys +# at the top of the keyboard. The "DO" key is used as F10 to avoid conflict +# with the key marked (ESC) on the vt220. See vt220d for an alternate mapping. +# PF1--PF4 are used as F1--F4. +# +vt220|vt200|DEC VT220 in vt100 emulation mode, + am, mir, xenl, xon, + cols#80, lines#24, vt#3, + acsc=``aaffggjjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~, + bel=^G, blink=\E[5m$<2>, bold=\E[1m$<2>, civis=\E[?25l, + clear=\E[H\E[2J$<50>, cnorm=\E[?25h, cr=^M, + csr=\E[%i%p1%d;%p2%dr, cub1=^H, cud1=\E[B, cuf1=\E[C, + cup=\E[%i%p1%d;%p2%dH$<10>, cuu1=\E[A, dch1=\E[P, + dl1=\E[M, ed=\E[J$<50>, el=\E[K$<3>, home=\E[H, ht=^I, + if=/usr/share/tabset/vt100, il1=\E[L, ind=\ED$<20/>, + is2=\E[1;24r\E[24;1H, kbs=^H, kcub1=\E[D, kcud1=\E[B, + kcuf1=\E[C, kcuu1=\E[A, kdch1=\E[3~, kend=\E[4~, kf1=\EOP, + kf10=\E[29~, kf2=\EOQ, kf3=\EOR, kf4=\EOS, kf5=\E[17~, + kf6=\E[18~, kf7=\E[19~, kf8=\E[20~, kf9=\E[21~, + khome=\E[1~, kich1=\E[2~, knp=\E[6~, kpp=\E[5~, rc=\E8, + rev=\E[7m$<2>, rf=/usr/share/tabset/vt100, + ri=\EM$<14/>, rmacs=\E(B$<4>, rmam=\E[?7l, rmir=\E[4l, + rmso=\E[27m, rmul=\E[24m, + rs2=\E>\E[?3l\E[?4l\E[?5l\E[?7h\E[?8h, sc=\E7, + sgr=\E[0%?%p6%t;1%;%?%p2%t;4%;%?%p4%t;5%;%?%p1%p3%|%t;7%;m%?%p9%t\E(0%e\E(B%;, + sgr0=\E[m$<2>, smacs=\E(0$<2>, smam=\E[?7h, smir=\E[4h, + smso=\E[7m, smul=\E[4m, +vt220-w|vt200-w|DEC vt220 in wide mode, + cols#132, + rs3=\E[?3h, use=vt220, + +# +# vt220d: +# This vt220 description regards F6--F10 as the second block of function keys +# at the top of the keyboard. This mapping follows the description given +# in the VT220 Programmer Reference Manual and agrees with the labeling +# on some terminals that emulate the vt220. There is no support for an F5. +# See vt220 for an alternate mapping. +# +vt220d|DEC VT220 in vt100 mode with DEC function key labeling, + kf10=\E[21~, kf11=\E[23~, kf12=\E[24~, kf13=\E[25~, + kf14=\E[26~, kf15=\E[28~, kf16=\E[29~, kf17=\E[31~, + kf18=\E[32~, kf19=\E[33~, kf20=\E[34~, kf5@, kf6=\E[17~, + kf7=\E[18~, kf8=\E[19~, kf9=\E[20~, + use=vt220, + +vt220-nam|v200-nam|VT220 in vt100 mode with no auto margins, + am@, + rs2=\E>\E[?3l\E[?4l\E[?5l\E[?7l\E[?8h, use=vt220, + +# This is misnamed (see xterm-8bit for an example of 8-bit controls) +vt220-8|dec vt220 8 bit terminal, + am, mc5i, mir, msgr, xenl, xon, + cols#80, it#8, lines#24, + acsc=``aaffggjjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~, + bel=^G, blink=\E[5m, bold=\E[1m, clear=\E[H\E[J, cr=^M, + csr=\E[%i%p1%d;%p2%dr, cub=\E[%p1%dD, cub1=^H, + cud=\E[%p1%dB, cud1=^J, cuf=\E[%p1%dC, cuf1=\E[C, + cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA, cuu1=\E[A, + dch=\E[%p1%dP, dch1=\E[P, dl=\E[%p1%dM, dl1=\E[M, + ech=\E[%p1%dX, ed=\E[J, el=\E[K, el1=\E[1K, enacs=\E)0, + flash=\E[?5h$<200/>\E[?5l, home=\E[H, ht=^I, hts=\EH, + ich=\E[%p1%d@, if=/usr/share/tabset/vt100, + il=\E[%p1%dL, il1=\E[L, ind=\ED, + is2=\E[?7h\E[>\E[?1h\E F\E[?4l, kbs=^H, kcub1=\E[D, + kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A, kf1=\EOP, kf10=\E[21~, + kf11=\E[23~, kf12=\E[24~, kf13=\E[25~, kf14=\E[26~, + kf17=\E[31~, kf18=\E[32~, kf19=\E[33~, kf2=\EOQ, + kf20=\E[34~, kf3=\EOR, kf4=\EOS, kf6=\E[17~, kf7=\E[18~, + kf8=\E[19~, kf9=\E[20~, kfnd=\E[1~, khlp=\E[28~, + khome=\E[H, kich1=\E[2~, knp=\E[6~, kpp=\E[5~, krdo=\E[29~, + kslt=\E[4~, lf1=pf1, lf2=pf2, lf3=pf3, lf4=pf4, mc0=\E[i, + mc4=\E[4i, mc5=\E[5i, nel=\EE, rc=\E8, rev=\E[7m, ri=\EM, + rmacs=^O, rmam=\E[?7l, rmir=\E[4l, rmso=\E[27m, + rmul=\E[24m, rs1=\E[?3l, sc=\E7, sgr0=\E[m, smacs=^N, + smam=\E[?7h, smir=\E[4h, smso=\E[7m, smul=\E[4m, tbc=\E[3g, + +# vt220 termcap written Tue Oct 25 20:41:10 1988 by Alex Latzko +# (not an official DEC entry!) +# The problem with real vt220 terminals is they don't send escapes when in +# in vt220 mode. This can be gotten around two ways. 1> don't send +# escapes or 2> put the vt220 into vt100 mode and use all the nifty +# features of vt100 advanced video which it then has. +# +# This entry takes the view of putting a vt220 into vt100 mode so +# you can use the escape key in emacs and everything else which needs it. +# +# You probably don't want to use this on a VMS machine since VMS will think +# it has a vt220 and will get fouled up coming out of emacs +# +# From: Alexander Latzko <latzko@marsenius.rutgers.edu>, 30 Dec 1996 +vt200-js|vt220-js|dec vt200 series with jump scroll, + am, + cols#80, + bel=^G, clear=\E[H\E[J, cr=^M, csr=\E[%i%p1%d;%p2%dr, + cub1=^H, cud1=^J, cup=\E[%i%p1%d;%p2%dH, cuu1=\E[A, + dch1=\E[P, dl1=\E[M, ed=\E[J, el=\E[K, home=\E[H, ht=^I, + il1=\E[L, ind=\ED, + is2=\E[61"p\E[H\E[?3l\E[?4l\E[?1l\E[?5l\E[?6l\E[?7h\E[?8h\E[?25h\E>\E[m, + kbs=^H, kcub1=\EOD, kcud1=\EOB, kcuf1=\EOC, kcuu1=\EOA, + kf1=\EOP, kf2=\EOQ, kf3=\EOR, kf4=\EOS, nel=^M\ED, + rf=/usr/lib/tabset/vt100, ri=\EM, rmdc=, rmir=\E[4l, + rmkx=\E[?1l\E>, rmso=\E[27m$<5/>, rmul=\E[24m, + rs1=\E>\E[?3l\E[?4l\E[?5l\E[?7h\E[?8h, smdc=, + smir=\E[4h, smkx=\E[?1h\E=, smso=\E[7m$<5/>, smul=\E[4m, + +# This was DEC's vt320. Use the purpose-built one below instead +#vt320|DEC VT320 in vt100 emulation mode, +# use=vt220, + +# +# Use v320n for SCO's LYRIX. Otherwise, use Adam Thompson's vt320-nam. +# +vt320nam|v320n|DEC VT320 in vt100 emul. mode with NO AUTO WRAP mode, + am@, + rs2=\E>\E[?3l\E[?4l\E[?5l\E[?7l\E[?8h, use=vt220, + +# These entries are not DEC's official ones, they were purpose-built for the +# VT320. Here are the designer's notes: +# <kel> is end on a PC kbd. Actually 'select' on a VT. Mapped to +# 'Erase to End of Field'... since nothing seems to use 'end' anyways... +# khome is Home on a PC kbd. Actually 'FIND' on a VT. +# Things that use <knxt> usually use tab anyways... and things that don't use +# tab usually use <knxt> instead... +# kprv is same as tab - Backtab is useless... +# I left out <sgr> because of its RIDICULOUS complexity, +# and the resulting fact that it causes the termcap translation of the entry +# to SMASH the 1k-barrier... +# From: Adam Thompson <thompson@xanth.magic.mb.ca> Sept 10 1995 +# (vt320: uncommented <fsl> --esr) +vt320|vt300|dec vt320 7 bit terminal, + am, eslok, hs, mir, msgr, xenl, + cols#80, lines#24, wsl#80, + acsc=``aaffggjjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~, + bel=^G, blink=\E[5m, bold=\E[1m, civis=\E[?25l, + clear=\E[H\E[2J, cnorm=\E[?25h, cr=^M, + csr=\E[%i%p1%d;%p2%dr, cub=\E[%p1%dD, cub1=^H, + cud=\E[%p1%dB, cud1=^J, cuf=\E[%p1%dC, cuf1=\E[C, + cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA, cuu1=\E[A, + dch=\E[%p1%dP, dch1=\E[P, dl=\E[%p1%dM, dl1=\E[M, + ech=\E[%p1%dX, ed=\E[J, el=\E[K, el1=\E[1K, fsl=\E[0$}, + home=\E[H, ht=^I, hts=\EH, ich=\E[%p1%d@, il=\E[%p1%dL, + il1=\E[L, ind=\ED, + is2=\E>\E[?3l\E[?4l\E[5?l\E[?7h\E[?8h\E[1;24r\E[24;1H, + ka1=\EOw, ka3=\EOy, kb2=\EOu, kbs=\177, kc1=\EOq, kc3=\EOs, + kcub1=\EOD, kcud1=\EOB, kcuf1=\EOC, kcuu1=\EOA, + kdch1=\E[3~, kel=\E[4~, kent=\EOM, kf1=\EOP, kf10=\E[21~, + kf11=\E[23~, kf12=\E[24~, kf13=\E[25~, kf14=\E[26~, + kf15=\E[28~, kf16=\E[29~, kf17=\E[31~, kf18=\E[32~, + kf19=\E[33~, kf2=\EOQ, kf20=\E[34~, kf3=\EOR, kf4=\EOS, + kf6=\E[17~, kf7=\E[18~, kf8=\E[19~, kf9=\E[20~, + khome=\E[1~, kich1=\E[2~, knp=\E[6~, knxt=^I, kpp=\E[5~, + kprv=\E[Z, kslt=\E[4~, mc0=\E[i, mc4=\E[?4i, mc5=\E[?5i, + nel=\EE, rc=\E8, rev=\E[7m, rf=/usr/share/tabset/vt300, + ri=\EM, rmacs=\E(B, rmam=\E[?7l, rmir=\E[4l, + rmkx=\E[?1l\E>, rmso=\E[m, rmul=\E[m, + rs2=\E>\E[?3l\E[?4l\E[5?l\E[?7h\E[?8h\E[1;24r\E[24;1H, + sc=\E7, sgr0=\E[m, smacs=\E(0, smam=\E[?7h, smir=\E[4h, + smkx=\E[?1h\E=, smso=\E[7m, smul=\E[4m, tbc=\E[3g, + tsl=\E[1$}\E[H\E[K, +vt320-nam|vt300-nam|dec vt320 7 bit terminal with no am to make SAS happy, + am@, + is2=\E>\E[?3l\E[?4l\E[5?l\E[?7l\E[?8h\E[1;24r\E[24;1H, + rs2=\E>\E[?3l\E[?4l\E[5?l\E[?7l\E[?8h\E[1;24r\E[24;1H, + use=vt320, +# We have to init 132-col mode, not 80-col mode. +vt320-w|vt300-w|dec vt320 wide 7 bit terminal, + cols#132, wsl#132, + is2=\E>\E[?3h\E[?4l\E[5?l\E[?7h\E[?8h\E[1;24r\E[24;1H, + rs2=\E>\E[?3h\E[?4l\E[5?l\E[?7h\E[?8h\E[1;24r\E[24;1H, + use=vt320, +vt320-w-nam|vt300-w-nam|dec vt320 wide 7 bit terminal with no am, + am@, + is2=\E>\E[?3h\E[?4l\E[5?l\E[?7l\E[?8h\E[1;24r\E[24;1H, + rs2=\E>\E[?3h\E[?4l\E[5?l\E[?7l\E[?8h\E[1;24r\E[24;1H, + use=vt320-w, + +# VT330 and VT340 -- These are ReGIS and SIXEL graphics terminals +# which are pretty much a superset of the VT320. They have the +# host writable status line, yet another different DRCS matrix size, +# and such, but they add the DEC Technical character set, Multiple text +# pages, selectable length pages, and the like. The difference between +# the vt330 and vt340 is that the latter has only 2 planes and a monochrome +# monitor, the former has 4 planes and a color monitor. These terminals +# support VT131 and ANSI block mode, but as with much of these things, +# termcap/terminfo doesn't deal with these features. +# +# Note that this entry is are set up in what was the standard way for GNU +# Emacs v18 terminal modes to deal with the cursor keys in that the arrow +# keys were switched into application mode at the same time the numeric pad +# is switched into application mode. This changes the definitions of the +# arrow keys. Emacs v19 is smarter and mines its keys directly out of +# your termcap or terminfo entry, +# +# From: Daniel Glasser <dag@persoft.persoft.com>, 13 Oct 1993 +# (vt340: string capability "sb=\E[M" corrected to "sr"; +# also, added <rmam>/<smam> based on the init string -- esr) +vt340|dec-vt340|vt330|dec-vt330|dec vt340 graphics terminal with 24 line page, + am, eslok, hs, mir, msgr, xenl, xon, + cols#80, it#8, lines#24, vt#3, + acsc=``aaffggjjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~, + blink=\E[5m, bold=\E[1m, civis=\E[?25l, clear=\E[H\E[J, + cnorm=\E[?25h, cr=^M, csr=\E[%i%p1%d;%p2%dr, + cub=\E[%p1%dD, cub1=^H, cud=\E[%p1%dB, cud1=^J, + cuf=\E[%p1%dC, cuf1=\E[C, cup=\E[%i%p1%d;%p2%dH, + cuu=\E[%p1%dA, cuu1=\E[A, cvvis=\E[?25h, dch=\E[%p1%dP, + dch1=\E[P, dl=\E[%p1%dM, dl1=\E[M, + dsl=\E[2$~\r\E[1$}\E[K\E[$}, ed=\E[J, el=\E[K, + flash=\E[?5h\E[?5l$<200/>, fsl=\E[$}, home=\E[H, ht=^I, + hts=\EH, ich=\E[%p1%d@, il=\E[%p1%dL, il1=\E[L, ind=\ED, + is2=\E<\E F\E>\E[?1h\E[?3l\E[?4l\E[?5l\E[?7h\E[?8h\E[1;24r\E[24;1H, + kbs=^H, kcub1=\EOD, kcud1=\EOB, kcuf1=\EOC, kcuu1=\EOA, + kf1=\EOP, kf2=\EOQ, kf3=\EOR, kf4=\EOS, kf6=\E[17~, + kf7=\E[18~, kf8=\E[19~, kf9=\E[20~, lf1=pf1, lf2=pf2, + lf3=pf3, lf4=pf4, nel=^M\ED, rc=\E8, rev=\E[7m, + rf=/usr/share/tabset/vt300, ri=\EM, rmacs=^O, + rmam=\E[?7l, rmir=\E[4l, rmkx=\E[?1l\E>, rmso=\E[27m, + rmul=\E[24m, rs1=\E[?3l, sc=\E7, sgr0=\E[m, smacs=^N, + smam=\E[?7h, smir=\E[4h, smkx=\E[?1h\E=, smso=\E[7m, + smul=\E[4m, tbc=\E[3g, tsl=\E[2$~\E[1$}\E[1;%dH, + +# DEC doesn't supply a vt400 description, so we add Daniel Glasser's +# (originally written with vt420 as its primary name, and usable for it). +# +# VT400/420 -- This terminal is a superset of the vt320. It adds the multiple +# text pages and long text pages with selectable length of the vt340, along +# with left and right margins, rectangular area text copy, fill, and erase +# operations, selected region character attribute change operations, +# page memory and rectangle checksums, insert/delete column, reception +# macros, and other features too numerous to remember right now. TERMCAP +# can only take advantage of a few of these added features. +# +# Note that this entry is are set up in what was the standard way for GNU +# Emacs v18 terminal modes to deal with the cursor keys in that the arrow +# keys were switched into application mode at the same time the numeric pad +# is switched into application mode. This changes the definitions of the +# arrow keys. Emacs v19 is smarter and mines its keys directly out of +# your termcap entry, +# +# From: Daniel Glasser <dag@persoft.persoft.com>, 13 Oct 1993 +# (vt400: string capability ":sb=\E[M:" corrected to ":sr=\E[M:"; +# also, added <rmam>/<smam> based on the init string -- esr) +vt400|vt400-24|dec-vt400|dec vt400 24x80 column autowrap, + am, eslok, hs, mir, msgr, xenl, xon, + cols#80, it#8, lines#24, vt#3, + acsc=``aaffggjjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~, + blink=\E[5m, bold=\E[1m, civis=\E[?25l, + clear=\E[H\E[J$<10/>, cnorm=\E[?25h, cr=^M, + csr=\E[%i%p1%d;%p2%dr, cub=\E[%p1%dD, cub1=^H, + cud=\E[%p1%dB, cud1=^J, cuf=\E[%p1%dC, cuf1=\E[C, + cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA, cuu1=\E[A, + cvvis=\E[?25h, dch=\E[%p1%dP, dch1=\E[P, dl=\E[%p1%dM, + dl1=\E[M, dsl=\E[2$~\r\E[1$}\E[K\E[$}, ed=\E[J$<10/>, + el=\E[K$<4/>, flash=\E[?5h\E[?5l$<200/>, fsl=\E[$}, + home=\E[H, ht=^I, hts=\EH, ich=\E[%p1%d@, ich1=\E[@, + il=\E[%p1%dL, il1=\E[L, ind=\ED, + is2=\E<\E F\E>\E[?1h\E[?3l\E[?4l\E[?5l\E[?7h\E[?8h\E[1;24r\E[24;1H, + kbs=^H, kcub1=\EOD, kcud1=\EOB, kcuf1=\EOC, kcuu1=\EOA, + kf1=\EOP, kf2=\EOQ, kf3=\EOR, kf4=\EOS, kf6=\E[17~, + kf7=\E[18~, kf8=\E[19~, kf9=\E[20~, lf1=pf1, lf2=pf2, + lf3=pf3, lf4=pf4, nel=^M\ED, rc=\E8, rev=\E[7m, + rf=/usr/share/tabset/vt300, ri=\EM, rmacs=^O, + rmam=\E[?7l, rmir=\E[4l, rmkx=\E[?1l\E>, rmso=\E[27m, + rmul=\E[24m, rs1=\E<\E[?3l\E[!p\E[?7h, sc=\E7, sgr0=\E[m, + smacs=^N, smam=\E[?7h, smir=\E[4h, smkx=\E[?1h\E=, + smso=\E[7m, smul=\E[4m, tbc=\E[3g, + tsl=\E[2$~\E[1$}\E[1;%dH, + +# (vt420: I removed <kf0>, it collided with <kf10>. I also restored +# a missing <sc> -- esr) +vt420|DEC VT420, + am, mir, xenl, xon, + cols#80, lines#24, vt#3, + acsc=``aaffggjjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~, + bel=^G, blink=\E[5m$<2>, bold=\E[1m$<2>, + clear=\E[H\E[2J$<50>, cr=^M, csr=\E[%i%p1%d;%p2%dr, + cub1=^H, cud1=\E[B, cuf1=\E[C, + cup=\E[%i%p1%d;%p2%dH$<10>, cuu1=\E[A, dch1=\E[P, + dl1=\E[M, ed=\E[J$<50>, el=\E[K$<3>, home=\E[H, ht=^I, + if=/usr/share/tabset/vt300, il1=\E[L, ind=\ED, + is2=\E[1;24r\E[24;1H, is3=\E[?67h\E[64;1"p, kbs=^H, + kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A, + kdch1=\E[3~, kf1=\EOP, kf10=\E[29~, kf2=\EOQ, kf3=\EOR, + kf4=\EOS, kf5=\E[17~, kf6=\E[18~, kf7=\E[19~, kf8=\E[20~, + kf9=\E[21~, kfnd=\E[1~, kich1=\E[2~, knp=\E[6~, kpp=\E[5~, + kslt=\E[4~, rc=\E8, rev=\E[7m$<2>, + rf=/usr/share/tabset/vt300, ri=\EM, rmacs=\E(B$<4>, + rmam=\E[?7l, rmir=\E[4l, rmkx=\E>, + rmsc=\E[?0;0r\E>\E[?3l\E[?4l\E[?5l\E[?7h\E[?8h, + rmso=\E[m, rmul=\E[m, rs3=\E[?67h\E[64;1"p, sc=\E7, + sgr=\E[0%?%p6%t;1%;%?%p2%t;4%;%?%p4%t;5%;%?%p1%p3%|%t;7%;m%?%p9%t\E(0%e\E(B%;, + sgr0=\E[m$<2>, smacs=\E(0$<2>, smam=\E[?7h, smir=\E[4h, + smkx=\E=, smso=\E[7m, smul=\E[4m, + +# +# DEC VT220 and up support DECUDK (user-defined keys). DECUDK (i.e., pfx) +# takes two parameters, the key and the string. Translating the key is +# straightforward (keys 1-5 are not defined on real terminals, though some +# emulators define these): +# +# if (key < 16) then value = key; +# else if (key < 21) then value = key + 1; +# else if (key < 25) then value = key + 2; +# else if (key < 27) then value = key + 3; +# else if (key < 30) then value = key + 4; +# else value = key + 5; +# +# The string must be the hexadecimal equivalent, e.g., "5052494E" for "PRINT". +# There's no provision in terminfo for emitting a string in this format, so the +# application has to know it. +# +vt420pc|DEC VT420 w/PC keyboard, + kdch1=\177, kend=\E[4~, kf1=\E[11~, kf10=\E[21~, + kf11=\E[23~, kf12=\E[24~, kf13=\E[11;2~, kf14=\E[12;2~, + kf15=\E[13;2~, kf16=\E[14;2~, kf17=\E[15;2~, + kf18=\E[17;2~, kf19=\E[18;2~, kf2=\E[12~, kf20=\E[19;2~, + kf21=\E[20;2~, kf22=\E[21;2~, kf23=\E[23;2~, + kf24=\E[24;2~, kf25=\E[23~, kf26=\E[24~, kf27=\E[25~, + kf28=\E[26~, kf29=\E[28~, kf3=\E[13~, kf30=\E[29~, + kf31=\E[31~, kf32=\E[32~, kf33=\E[33~, kf34=\E[34~, + kf35=\E[35~, kf36=\E[36~, kf37=\E[23;2~, kf38=\E[24;2~, + kf39=\E[25;2~, kf4=\E[14~, kf40=\E[26;2~, kf41=\E[28;2~, + kf42=\E[29;2~, kf43=\E[31;2~, kf44=\E[32;2~, + kf45=\E[33;2~, kf46=\E[34;2~, kf47=\E[35;2~, + kf48=\E[36;2~, kf5=\E[15~, kf6=\E[17~, kf7=\E[18~, + kf8=\E[19~, kf9=\E[20~, khome=\E[H, + pctrm=USR_TERM\:vt420pcdos\:, + pfx=\EP1;1|%?%{16}%p1%>%t%{0}%e%{21}%p1%>%t%{1}%e%{25}%p1%>%t%{2}%e%{27}%p1%>%t%{3}%e%{30}%p1%>%t%{4}%e%{5}%;%p1%+%d/%p2%s\E\\, use=vt420, + +vt420pcdos|DEC VT420 w/PC for DOS Merge, + lines#25, + dispc=%?%p2%{19}%=%t\E\023\021%e%p2%{32}%<%t\E%p2%c%e%p2%{127}%=%t\E\177%e%p2%c%;, + pctrm@, + rmsc=\E[?0;0r\E>\E[?3l\E[?4l\E[?5l\E[?7h\E[?8h, sgr@, + sgr0=\E[m, smsc=\E[?1;2r\E[34h, + use=vt420pc, + +vt420f|DEC VT420 with VT kbd; VT400 mode; F1-F5 used as Fkeys, + kdch1=\177, kf1=\E[11~, kf10=\E[21~, kf11=\E[23~, + kf12=\E[24~, kf13=\E[25~, kf14=\E[26~, kf15=\E[28~, + kf16=\E[29~, kf17=\E[31~, kf18=\E[32~, kf19=\E[33~, + kf2=\E[12~, kf20=\E[34~, kf3=\E[13~, kf4=\E[14~, + kf5=\E[15~, kf6=\E[17~, kf7=\E[18~, kf8=\E[19~, kf9=\E[20~, + khome=\E[H, lf1=\EOP, lf2=\EOQ, lf3=\EOR, lf4=\EOS, + use=vt420, + +vt510|DEC VT510, + use=vt420, +vt510pc|DEC VT510 w/PC keyboard, + use=vt420pc, +vt510pcdos|DEC VT510 w/PC for DOS Merge, + use=vt420pcdos, + +# VT520/VT525 +# +# The VT520 is a monochrome text terminal capable of managing up to +# four independent sessions in the terminal. It has multiple ANSI +# emulations (VT520, VT420, VT320, VT220, VT100, VT PCTerm, SCO Console) +# and ASCII emulations (WY160/60, PCTerm, 50/50+, 150/120, TVI 950, +# 925 910+, ADDS A2). This terminfo data is for the ANSI emulations only. +# +# Terminal Set-Up is entered by pressing [F3], [Caps Lock]/[F3] or +# [Alt]/[Print Screen] depending upon which keyboard and which +# terminal mode is being used. If Set-Up has been disabled or +# assigned to an unknown key, Set-Up may be entered by pressing +# [F3] as the first key after power up, regardless of keyboard type. +# (vt520: I added <rmam>/<smam> based on the init string, also <sc> -- esr) +vt520|DEC VT520, + am, mir, xenl, xon, + cols#80, lines#24, vt#3, + acsc=``aaffggjjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~, + bel=^G, blink=\E[5m$<2>, bold=\E[1m$<2>, + clear=\E[H\E[2J$<50>, cr=^M, csr=\E[%i%p1%d;%p2%dr, + cub1=^H, cud1=\E[B, cuf1=\E[C, + cup=\E[%i%p1%d;%p2%dH$<10>, cuu1=\E[A, dch1=\E[P, + dl1=\E[M, ed=\E[J$<50>, el=\E[K$<3>, home=\E[H, ht=^I, + if=/usr/share/tabset/vt300, il1=\E[L, ind=\ED, + is2=\E[1;24r\E[24;1H, is3=\E[?67h\E[64;1"p, kbs=^H, + kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A, + kdch1=\E[3~, kf0=\E[29~, kf1=\EOP, kf10=\E[29~, kf2=\EOQ, + kf3=\EOR, kf4=\EOS, kf5=\E[17~, kf6=\E[18~, kf7=\E[19~, + kf8=\E[20~, kf9=\E[21~, kfnd=\E[1~, kich1=\E[2~, knp=\E[6~, + kpp=\E[5~, kslt=\E[4~, + pfx=\EP1;1|%?%{16}%p1%>%t%{0}%e%{21}%p1%>%t%{1}%e%{25}%p1%>%t%{2}%e%{27}%p1%>%t%{3}%e%{30}%p1%>%t%{4}%e%{5}%;%p1%+%d/%p2%s\E\\, + rc=\E8, rev=\E[7m$<2>, rf=/usr/share/tabset/vt300, + ri=\EM, rmacs=\E(B$<4>, rmam=\E[?7l, rmir=\E[4l, + rmsc=\E[?0;0r\E>\E[?3l\E[?4l\E[?5l\E[?7h\E[?8h, + rmso=\E[m, rmul=\E[m, rs3=\E[?67h\E[64;1"p, sc=\E7, + sgr=\E[0%?%p6%t;1%;%?%p2%t;4%;%?%p4%t;5%;%?%p1%p3%|%t;7%;m%?%p9%t\E(0%e\E(B%;, + sgr0=\E[m$<2>, smacs=\E(0$<2>, smam=\E[?7h, smir=\E[4h, + smso=\E[7m, smul=\E[4m, + +# (vt525: I added <rmam>/<smam> based on the init string; +# removed <rmso>=\E[m, <rmul>=\E[m, added <sc> -- esr) +vt525|DEC VT525, + am, mir, xenl, xon, + cols#80, lines#24, vt#3, + acsc=``aaffggjjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~, + bel=^G, blink=\E[5m$<2>, bold=\E[1m$<2>, + clear=\E[H\E[2J$<50>, cr=^M, csr=\E[%i%p1%d;%p2%dr, + cub1=^H, cud1=\E[B, cuf1=\E[C, + cup=\E[%i%p1%d;%p2%dH$<10>, cuu1=\E[A, dch1=\E[P, + dl1=\E[M, ed=\E[J$<50>, el=\E[K$<3>, home=\E[H, ht=^I, + if=/usr/share/tabset/vt300, il1=\E[L, ind=\ED, + is2=\E[1;24r\E[24;1H, is3=\E[?67h\E[64;1"p, kbs=^H, + kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A, + kdch1=\E[3~, kf0=\E[29~, kf1=\EOP, kf10=\E[29~, kf2=\EOQ, + kf3=\EOR, kf4=\EOS, kf5=\E[17~, kf6=\E[18~, kf7=\E[19~, + kf8=\E[20~, kf9=\E[21~, kfnd=\E[1~, kich1=\E[2~, knp=\E[6~, + kpp=\E[5~, kslt=\E[4~, + pfx=\EP1;1|%?%{16}%p1%>%t%{0}%e%{21}%p1%>%t%{1}%e%{25}%p1%>%t%{2}%e%{27}%p1%>%t%{3}%e%{30}%p1%>%t%{4}%e%{5}%;%p1%+%d/%p2%s\E\\, + rc=\E8, rev=\E[7m$<2>, rf=/usr/share/tabset/vt300, + ri=\EM, rmacs=\E(B$<4>, rmam=\E[?7l, rmir=\E[4l, + rmsc=\E[?0;0r\E>\E[?3l\E[?4l\E[?5l\E[?7h\E[?8h, + rmso=\E[m, rmul=\E[m, rs3=\E[?67h\E[64;1"p, sc=\E7, + sgr=\E[0%?%p6%t;1%;%?%p2%t;4%;%?%p4%t;5%;%?%p1%p3%|%t;7%;m%?%p9%t\E(0%e\E(B%;, + sgr0=\E[m$<2>, smacs=\E(0$<2>, smam=\E[?7h, smir=\E[4h, + smso=\E[7m, smul=\E[4m, + +#### VT100 emulations +# + +# John Hawkinson <jhawk@MIT.EDU> tells us that the EWAN telnet for Windows +# (the best Windows telnet as of September 1995) presents the name `dec-vt100' +# to telnetd. Michael Deutschmann <ldeutsch@mail.netshop.net> informs us +# that this works best with a stock vt100 entry. +dec-vt100|EWAN telnet's vt100 emulation, + use=vt100, + +# From: Adrian Garside <94ajg2@eng.cam.ac.uk>, 19 Nov 1996 +dec-vt220|DOS tnvt200 terminal emulator, + am@, use=vt220, + +# Zstem340 is an (IMHO) excellent VT emulator for PC's. I recommend it to +# anyone who needs PC VT340 emulation. (or anything below that level, for +# that matter -- DEC's ALL-in-1 seems happy with it, as does INFOPLUS's +# RDBM systems, it includes ReGIS and SiXel support! I'm impressed... +# I can send the address if requested. +# (z340: changed garbled \E[5?l to \E[?5l, DEC smooth scroll off -- esr) +# From: Adam Thompson <thompson@xanth.magic.mb.ca> Sept 10 1995 +z340|zstem vt340 terminal emulator 132col 42line, + lines#42, + is2=\E>\E[?3h\E[?4l\E[?5l\E[?7h\E[?8h\E[1;42r\E[42;1H, + rs2=\E>\E[?3h\E[?4l\E[?5l\E[?7h\E[?8h\E[1;42r\E[42;1H, + use=vt320-w, +z340-nam|zstem vt340 terminal emulator 132col 42line (no automatic margins), + am@, + is2=\E>\E[?3h\E[?4l\E[?5l\E[?7l\E[?8h\E[1;42r\E[42;1H, + rs2=\E>\E[?3h\E[?4l\E[?5l\E[?7l\E[?8h\E[1;42r\E[42;1H, + use=z340, + +# CRT is shareware. It implements some xterm features, including mouse. +crt|crt-vt220|CRT 2.3 emulating VT220, + bce, msgr, + colors#8, pairs#64, + hts=\EH, op=\E[39;49m, setab=\E[4%p1%dm, + setaf=\E[3%p1%dm, setb=\E[4%p1%dm, setf=\E[3%p1%dm, + u6=\E[%i%d;%dR, u7=\E[6n, u8=\E[?1;2c, u9=\E[c, + use=vt220, + +# This entry is for Tera Term Pro version 2.3, for MS-Windows 95/NT written by +# T. Teranishi dated Mar 10, 1998. It is a free software terminal emulator +# (communication program) which supports: +# +# - Serial port connections. +# - TCP/IP (telnet) connections. +# - VT100 emulation, and selected VT200/300 emulation. +# - TEK4010 emulation. +# - File transfer protocols (Kermit, XMODEM, ZMODEM, B-PLUS and +# Quick-VAN). +# - Scripts using the "Tera Term Language". +# - Japanese and Russian character sets. +# +# The program does not come with terminfo or termcap entries. However, the +# emulation (testing with vttest and ncurses) is reasonably close to vt100 (no +# vt52 or doublesize character support; blinking is done with color). Besides +# the HPA, VPA extensions it also implements CPL and CNL. +# +# All of the function keys can be remapped. This description shows the default +# mapping, as installed. Both vt100 PF1-PF4 keys and quasi-vt220 F1-F4 keys +# are supported. F13-F20 are obtained by shifting F3-F10. The editing keypad +# is laid out like vt220, rather than the face codes on the PC keyboard, i.e, +# kfnd Insert +# kslt Delete +# kich1 Home +# kdch1 PageUp +# kpp End +# knp PageDown +# +# ANSI colors are implemented, but cannot be combined with video attributes +# except for reverse. +# +# No fonts are supplied with the program, so the acsc string is chosen to +# correspond with the default Microsoft terminal font. +# +# Tera Term recognizes some xterm sequences, including those for setting and +# retrieving the window title, and for setting the window size (i.e., using +# "resize -s"), though it does not pass SIGWINCH to the application if the +# user resizes the window with the mouse. +teraterm|Tera Term Pro, + km, xon@, + ncv#43, vt@, + acsc=+\020\,\021-\030.^Y0\333`\004a\261f\370g\361h\260i\316j\331k\277l\332m\300n\305o~p\304q\304r\304s_t\303u\264v\301w\302x\263y\363z\362{\343|\330}\234~\376, + blink=\E[5m, bold=\E[1m, civis=\E[?25l, clear=\E[H\E[J, + cnorm=\E[?25h, cuf1=\E[C, cup=\E[%i%p1%d;%p2%dH, + cuu1=\E[A, dch=\E[%p1%dP, dch1=\E[P, dl=\E[%p1%dM, + dl1=\E[M, ech=\E[%p1%dX, ed=\E[J, el=\E[K, el1=\E[1K, + flash=\E[?5h\E[?5l$<200/>, hpa=\E[%i%p1%dG, + il=\E[%p1%dL, il1=\E[L, kdch1=\E[3~, kf1=\E[11~, + kf10=\E[21~, kf11=\E[23~, kf12=\E[24~, kf13=\E[25~, + kf14=\E[26~, kf15=\E[28~, kf16=\E[29~, kf17=\E[31~, + kf18=\E[32~, kf19=\E[33~, kf2=\E[12~, kf20=\E[34~, + kf3=\E[13~, kf4=\E[14~, kf5=\E[15~, kf6=\E[17~, kf7=\E[18~, + kf8=\E[19~, kf9=\E[20~, kfnd=\E[1~, kich1=\E[2~, knp=\E[6~, + kpp=\E[5~, kslt=\E[4~, op=\E[100m, rev=\E[7m, ri=\EM, + rmso=\E[27m, rmul=\E[24m, sgr0=\E[m, smso=\E[7m, + smul=\E[4m, u6=\E[%i%d;%dR, u7=\E[6n, u8=\E[?1;2c, u9=\E[c, + vpa=\E[%i%p1%dd, + use=klone+color, use=vt100, + +# Tested with WinNT 4.0, the telnet application assumes the screensize is +# 25x80. This entry uses the 'Terminal' font, to get line-drawing characters. +ms-vt100|MS telnet imitating dec vt100, + lines#25, + acsc=+\020\,\021-\030.^Y0\333`\004a\261f\370g\361h\260i\316j\331k\277l\332m\300n\305o~p\304q\304r\304s_t\303u\264v\301w\302x\263y\363z\362{\343|\330}\234~\376, + tbc@, u6=\E[%i%d;%dR, u7=\E[6n, u8=\E[?6c, u9=\E[c, + use=vt100, + +#### X terminal emulators +# +# You can add the following line to your .Xdefaults to change the terminal type +# set by the xterms you start up to my-xterm: +# +# *termName: my-xterm +# +# System administrators can change the default entry for xterm instances +# by adding a similar line to /usr/X11/lib/X11/app-defaults/XTerm. In either +# case, xterm will detect and reject an invalid terminal type, falling back +# to the default of xterm. +# + +# X10/6.6 11/7/86, minus alternate screen, plus (csr) +# (xterm: ":MT:" changed to ":km:"; added <smam>/<rmam> based on init string; +# removed (hs, eslok, tsl=\E[?E\E[?%i%dT, fsl=\E[?F, dsl=\E[?E) +# as these seem not to work -- esr) +x10term|vs100-x10|xterm terminal emulator (X10 window system), + am, km, mir, msgr, xenl, xon, + cols#80, it#8, lines#65, + bold=\E[1m, clear=\E[H\E[2J, csr=\E[%i%p1%d;%p2%dr, + cub1=^H, cud1=^J, cuf1=\E[C, cup=\E[%i%p1%d;%p2%dH, + cuu1=\E[A, dch=\E[%p1%dP, dch1=\E[P, dl=\E[%p1%dM, + dl1=\E[M, ed=\E[J, el=\E[K, home=\E[H, ht=^I, il=\E[%p1%dL, + il1=\E[L, ind=^J, is2=\E\E[m\E[?7h\E[?1;4l, kbs=^H, + kcub1=\EOD, kcud1=\EOB, kcuf1=\EOC, kcuu1=\EOA, kf1=\EOP, + kf2=\EOQ, kf3=\EOR, kf4=\EOS, rev=\E[7m, ri=\EM, rmam=\E[?7l, + rmir=\E[4l, rmkx=\E[?1l\E>, rmso=\E[m, rmul=\E[m, + sgr0=\E[m, smam=\E[?7h, smir=\E[4h, smkx=\E[?1h\E=, + smso=\E[7m, smul=\E[4m, +# Compatible with the R5 xterm +# (from the XFree86 3.2 distribution, <blink=@> removed) +# added khome/kend, rmir/smir, rmul/smul based on the R5 xterm code - TD +# corrected typos in rs2 string - TD +xterm-r5|xterm R5 version, + am, km, msgr, xenl, + cols#80, it#8, lines#24, + bel=^G, bold=\E[1m, clear=\E[H\E[2J, cr=^M, + csr=\E[%i%p1%d;%p2%dr, cub=\E[%p1%dD, cub1=^H, + cud=\E[%p1%dB, cud1=^J, cuf=\E[%p1%dC, cuf1=\E[C, + cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA, cuu1=\E[A, + dch=\E[%p1%dP, dch1=\E[P, dl=\E[%p1%dM, dl1=\E[M, ed=\E[J, + el=\E[K, home=\E[H, ht=^I, hts=\EH, ich=\E[%p1%d@, ich1=\E[@, + il=\E[%p1%dL, il1=\E[L, ind=^J, kbs=^H, kcub1=\EOD, + kcud1=\EOB, kcuf1=\EOC, kcuu1=\EOA, kdch1=\E[3~, + kdl1=\E[31~, kel=\E[8~, kend=\E[4~, kf0=\EOq, kf1=\E[11~, + kf10=\E[21~, kf11=\E[23~, kf12=\E[24~, kf2=\E[12~, + kf3=\E[13~, kf4=\E[14~, kf5=\E[15~, kf6=\E[17~, kf7=\E[18~, + kf8=\E[19~, kf9=\E[20~, khome=\E[1~, kich1=\E[2~, + kil1=\E[30~, kmous=\E[M, knp=\E[6~, kpp=\E[5~, rc=\E8, + rev=\E[7m, ri=\EM, rmir=\E[4l, rmkx=\E[?1l\E>, rmso=\E[m, + rmul=\E[m, + rs2=\E>\E[?1;3;4;5;6l\E[4l\E[?7h\E[m\E[r\E[2J\E[H, + sc=\E7, + sgr=\E[%?%p1%t;7%;%?%p2%t;4%;%?%p3%t;7%;%?%p4%t;5%;%?%p6%t;1%;m, + sgr0=\E[m, smir=\E[4h, smkx=\E[?1h\E=, smso=\E[7m, + smul=\E[4m, tbc=\E[3g, +# Compatible with the R6 xterm +# (from XFree86 3.2 distribution, <acsc> and <it> added, <blink@> removed) +# added khome/kend - TD +xterm-r6|xterm-old|xterm X11R6 version, + am, km, mir, msgr, xenl, + cols#80, it#8, lines#24, + acsc=``aaffggiijjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~, + bel=^G, bold=\E[1m, clear=\E[H\E[2J, cr=^M, + csr=\E[%i%p1%d;%p2%dr, cub=\E[%p1%dD, cub1=^H, + cud=\E[%p1%dB, cud1=^J, cuf=\E[%p1%dC, cuf1=\E[C, + cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA, cuu1=\E[A, + dch=\E[%p1%dP, dch1=\E[P, dl=\E[%p1%dM, dl1=\E[M, ed=\E[J, + el=\E[K, enacs=\E)0, home=\E[H, ht=^I, il=\E[%p1%dL, + il1=\E[L, ind=^J, + is2=\E7\E[r\E[m\E[?7h\E[?1;3;4;6l\E[4l\E8\E>, kbs=^H, + kcub1=\EOD, kcud1=\EOB, kcuf1=\EOC, kcuu1=\EOA, + kdch1=\E[3~, kf1=\EOP, kf10=\E[21~, kf11=\E[23~, + kf12=\E[24~, kf13=\E[25~, kf14=\E[26~, kf15=\E[28~, + kf16=\E[29~, kf17=\E[31~, kf18=\E[32~, kf19=\E[33~, + kf2=\EOQ, kf20=\E[34~, kf3=\EOR, kf4=\EOS, kf5=\E[15~, + kf6=\E[17~, kf7=\E[18~, kf8=\E[19~, kf9=\E[20~, kfnd=\E[1~, + kich1=\E[2~, kmous=\E[M, knp=\E[6~, kpp=\E[5~, kslt=\E[4~, + meml=\El, memu=\Em, rc=\E8, rev=\E[7m, ri=\EM, rmacs=^O, + rmcup=\E[2J\E[?47l\E8, rmir=\E[4l, rmkx=\E[?1l\E>, + rmso=\E[m, rmul=\E[m, + rs2=\E7\E[r\E[m\E[?7h\E[?1;3;4;6l\E[4l\E8\E>, sc=\E7, + sgr0=\E[m, smacs=^N, smcup=\E7\E[?47h, smir=\E[4h, + smkx=\E[?1h\E=, smso=\E[7m, smul=\E[4m, tbc=\E[3g, + u6=\E[%i%d;%dR, u7=\E[6n, u8=\E[?1;2c, u9=\E[c, +# This is the base xterm entry for the xterm supplied with XFree86 3.2 & up. +# The name has been changed and some aliases have been removed. +xterm-xf86-v32|xterm terminal emulator (XFree86 3.2 Window System), + am, bce, km, mir, msgr, xenl, + colors#8, cols#80, it#8, lines#24, pairs#64, + acsc=``aaffggiijjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~, + bel=^G, bold=\E[1m, cbt=\E[Z, civis=\E[?25l, + clear=\E[H\E[2J, cnorm=\E[?25h, cr=^M, + csr=\E[%i%p1%d;%p2%dr, cub=\E[%p1%dD, cub1=^H, + cud=\E[%p1%dB, cud1=^J, cuf=\E[%p1%dC, cuf1=\E[C, + cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA, cuu1=\E[A, + cvvis=\E[?25h, dch=\E[%p1%dP, dch1=\E[P, dl=\E[%p1%dM, + dl1=\E[M, ech=\E[%p1%dX, ed=\E[J, el=\E[K, el1=\E[1K, + enacs=\E(B\E)0, flash=\E[?5h\E[?5l, home=\E[H, + hpa=\E[%i%p1%dG, ht=^I, hts=\EH, ich=\E[%p1%d@, ich1=\E[@, + il=\E[%p1%dL, il1=\E[L, ind=^J, + is2=\E7\E[r\E[m\E[?7h\E[?1;3;4;6l\E[4l\E8\E>, + ka1=\EOw, ka3=\EOu, kb2=\EOy, kbeg=\EOE, kbs=^H, kc1=\EOq, + kc3=\EOs, kcub1=\EOD, kcud1=\EOB, kcuf1=\EOC, kcuu1=\EOA, + kdch1=\177, kend=\EOF, kent=\EOM, kf1=\E[11~, kf10=\E[21~, + kf11=\E[23~, kf12=\E[24~, kf13=\E[25~, kf14=\E[26~, + kf15=\E[28~, kf16=\E[29~, kf17=\E[31~, kf18=\E[32~, + kf19=\E[33~, kf2=\E[12~, kf20=\E[34~, kf3=\E[13~, + kf4=\E[14~, kf5=\E[15~, kf6=\E[17~, kf7=\E[18~, kf8=\E[19~, + kf9=\E[20~, kfnd=\E[1~, khome=\EOH, kich1=\E[2~, + kmous=\E[M, knp=\E[6~, kpp=\E[5~, kslt=\E[4~, meml=\El, + memu=\Em, op=\E[39;49m, rc=\E8, rev=\E[7m, ri=\EM, rmacs=^O, + rmam=\E[?7l, rmcup=\E[2J\E[?47l\E8, rmir=\E[4l, + rmkx=\E[?1l\E>, rmso=\E[27m, rmul=\E[24m, rs1=^O, + rs2=\E7\E[r\E[m\E[?7h\E[?1;3;4;6l\E[4l\E8\E>, sc=\E7, + setab=\E[4%p1%dm, setaf=\E[3%p1%dm, + setb=\E[4%?%p1%{1}%=%t4%e%p1%{3}%=%t6%e%p1%{4}%=%t1%e%p1%{6}%=%t3%e%p1%d%;m, + setf=\E[3%?%p1%{1}%=%t4%e%p1%{3}%=%t6%e%p1%{4}%=%t1%e%p1%{6}%=%t3%e%p1%d%;m, + sgr=\E[0%?%p1%p6%|%t;1%;%?%p2%t;4%;%?%p1%p3%|%t;7%;%?%p4%t;5%;m%?%p9%t\016%e\017%;, + sgr0=\E[m\017, smacs=^N, smam=\E[?7h, smcup=\E7\E[?47h, + smir=\E[4h, smkx=\E[?1h\E=, smso=\E[7m, smul=\E[4m, + tbc=\E[3g, u6=\E[%i%d;%dR, u7=\E[6n, u8=\E[?1;2c, u9=\E[c, + vpa=\E[%i%p1%dd, + +# This is the stock xterm entry supplied with XFree86 3.3, which uses VT100 +# codes for F1-F4 except while in VT220 mode. +xterm-xf86-v33|xterm terminal emulator (XFree86 3.3 Window System), + kf1=\EOP, kf2=\EOQ, kf3=\EOR, kf4=\EOS, + use=xterm-xf86-v32, + +# This version was released in XFree86 3.3.3 (November 1998). +# Besides providing printer support, it exploits a new feature that allows +# xterm to use terminfo-based descriptions with the titeInhibit resource. +xterm-xf86-v333|xterm terminal emulator (XFree86 3.3.3 Window System), + mc5i, + blink=\E[5m, ich1@, invis=\E[8m, + is2=\E[!p\E[?3;4l\E[4l\E>, kdch1=\E[3~, kend=\E[4~, + kfnd@, khome=\E[1~, kslt@, mc0=\E[i, mc4=\E[4i, mc5=\E[5i, + rmcup=\E[?1047l\E[?1048l, rs1=\Ec, + rs2=\E[!p\E[?3;4l\E[4l\E>, + sgr=\E[0%?%p1%p6%|%t;1%;%?%p2%t;4%;%?%p1%p3%|%t;7%;%?%p4%t;5%;%?%p7%t;8%;m%?%p9%t\016%e\017%;, + smcup=\E[?1048h\E[?1047h, + use=xterm-xf86-v33, + +# This beta version will probably be released in XFree86 4.0. +xterm-xf86-v40|xterm terminal emulator (XFree86 4.0 Window System), + ka1=\EOH, ka3=\E[5~, kb2=\EOE, kc1=\EOF, kc3=\E[6~, + kdch1=\177, kend=\EOF, khome=\EOH, rmcup=\E[?1049l, + smcup=\E[?1049h, + use=xterm-xf86-v333, + +xterm-xfree86|xterm-new|xterm terminal emulator (XFree86 4.0 Window System), + use=xterm-xf86-v40, + +# From: David J. MacKenzie <djm@va.pubnix.com>, 14 Nov 1997 +xterm-xi|xterm on XI Graphics Accelerated X under BSD/OS 3.1, + rmso=\E[m, rmul=\E[m, + use=xterm-xf86-v33, + +# This is one of the variants of XFree86 3.3 xterm, updated for 4.0 (T.Dickey) +xterm-16color|xterm with 16 colors like aixterm, + colors#16, ncv#32, pairs#256, + setab=\E[%?%p1%{8}%<%t%p1%{40}%+%e%p1%{92}%+%;%dm, + setaf=\E[%?%p1%{8}%<%t%p1%{30}%+%e%p1%{82}%+%;%dm, + setb=%p1%{8}%/%{6}%*%{4}%+\E[%d%p1%{8}%m%Pa%?%ga%{1}%=%t4%e%ga%{3}%=%t6%e%ga%{4}%=%t1%e%ga%{6}%=%t3%e%ga%d%;m, + setf=%p1%{8}%/%{6}%*%{3}%+\E[%d%p1%{8}%m%Pa%?%ga%{1}%=%t4%e%ga%{3}%=%t6%e%ga%{4}%=%t1%e%ga%{6}%=%t3%e%ga%d%;m, + use=xterm-xf86-v40, + +# This is another variant, for XFree86 4.0 xterm (T.Dickey) +# This is an 8-bit version of xterm, which emulates DEC vt220 with ANSI color. +# To use it, your decTerminalID resource must be set to 200 or above. +# +# HTS \E H \210 +# RI \E M \215 +# SS3 \E O \217 +# CSI \E [ \233 +# +xterm-8bit|xterm terminal emulator 8-bit controls (X Window System), + am, bce, km, mc5i, mir, msgr, xenl, + colors#8, cols#80, it#8, lines#24, pairs#64, + acsc=``aaffggiijjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~, + bel=^G, blink=\2335m, bold=\2331m, cbt=\233Z, + civis=\233?25l, clear=\233H\2332J, cnorm=\233?25h, cr=^M, + csr=\233%i%p1%d;%p2%dr, cub=\233%p1%dD, cub1=^H, + cud=\233%p1%dB, cud1=^J, cuf=\233%p1%dC, cuf1=\233C, + cup=\233%i%p1%d;%p2%dH, cuu=\233%p1%dA, cuu1=\233A, + cvvis=\233?25h, dch=\233%p1%dP, dch1=\233P, + dl=\233%p1%dM, dl1=\233M, ech=\233%p1%dX, ed=\233J, + el=\233K, el1=\2331K, enacs=\E(B\E)0, + flash=\233?5h\233?5l, home=\233H, hpa=\233%i%p1%dG, + ht=^I, hts=\210, ich=\233%p1%d@, il=\233%p1%dL, il1=\233L, + ind=^J, invis=\2338m, + is2=\E7\E G\233r\233m\233?7h\233?1;3;4;6l\2334l\E8\E>, + ka1=\217w, ka3=\217u, kb2=\217y, kbeg=\217E, kbs=^H, + kc1=\217q, kc3=\217s, kcub1=\217D, kcud1=\217B, + kcuf1=\217C, kcuu1=\217A, kdch1=\2333~, kend=\2334~, + kent=\217M, kf1=\23311~, kf10=\23321~, kf11=\23323~, + kf12=\23324~, kf13=\23325~, kf14=\23326~, kf15=\23328~, + kf16=\23329~, kf17=\23331~, kf18=\23332~, kf19=\23333~, + kf2=\23312~, kf20=\23334~, kf3=\23313~, kf4=\23314~, + kf5=\23315~, kf6=\23317~, kf7=\23318~, kf8=\23319~, + kf9=\23320~, khome=\2331~, kich1=\2332~, kmous=\233M, + knp=\2336~, kpp=\2335~, mc0=\233i, mc4=\2334i, mc5=\2335i, + meml=\El, memu=\Em, op=\23339;49m, rc=\E8, rev=\2337m, + ri=\215, rmacs=^O, rmam=\233?7l, rmcup=\233?1049l, + rmir=\2334l, rmkx=\233?1l\E>, rmso=\23327m, rmul=\23324m, + rs1=\Ec, + rs2=\E7\E[62"p\E G\233r\233m\233?7h\233?1;3;4;6l\2334l\E8\E>, + sc=\E7, setab=\2334%p1%dm, setaf=\2333%p1%dm, + setb=\2334%?%p1%{1}%=%t4%e%p1%{3}%=%t6%e%p1%{4}%=%t1%e%p1%{6}%=%t3%e%p1%d%;m, + setf=\2333%?%p1%{1}%=%t4%e%p1%{3}%=%t6%e%p1%{4}%=%t1%e%p1%{6}%=%t3%e%p1%d%;m, + sgr=\2330%?%p1%p6%|%t;1%;%?%p2%t;4%;%?%p1%p3%|%t;7%;%?%p4%t;5%;%?%p7%t;8%;m%?%p9%t\016%e\017%;, + sgr0=\233m^O, smacs=^N, smam=\233?7h, smcup=\233?1049h, + smir=\2334h, smkx=\233?1h\E=, smso=\2337m, smul=\2334m, + tbc=\2333g, u6=\233[%i%d;%dR, u7=\E[6n, u8=\233[?1;2c, + u9=\E[c, vpa=\233%i%p1%dd, + +xterm-24|vs100|xterms|xterm terminal emulator (X Window System), + lines#24, use=xterm, + +# This is xterm for ncurses. +xterm|xterm terminal emulator (X Window System), + acsc=``aaffggiijjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~, + kmous=\E[M, u6=\E[%i%d;%dR, u7=\E[6n, u8=\E[?1;2c, u9=\E[c, + use=xterm-r6, + +# These entries allow access to the X titlebar and icon name as a status line. +# Note that twm (and possibly window managers descended from it such as tvtwm, +# ctwm, and vtwm) track windows by icon-name; thus, you don't want to mess +# with it. +xterm+sl|access X title line and icon name, + hs, + wsl#40, + dsl=\E]0;\007, fsl=^G, tsl=\E]0;, use=xterm, +xterm+sl-twm|access X title line (pacify twm-descended window managers), + hs, + wsl#40, + dsl=\E]2;\007, fsl=^G, tsl=\E]2;, use=xterm, + +# +# The following xterm variants don't depend on your base version +# +# xterm with bold instead of underline +xterm-bold|xterm terminal emulator (X11R6 Window System) standout w/bold, + smso=\E[7m, smul=\E[1m, + use=xterm, +# (kterm: this had extension capabilities ":KJ:TY=ascii:" -- esr) +# (kterm should not invoke DEC Graphics as the alternate character set +# -- Kenji Rikitake) +kterm|kterm kanji terminal emulator (X window system), + eslok, hs, + acsc@, csr=\E[%i%p1%d;%p2%dr, dsl=\E[?H, enacs@, fsl=\E[?F, + kmous=\E[M, op=\E[39;49m, rc=\E8, rmacs@, sc=\E7, smacs@, + tsl=\E[?E\E[?%i%dT, + use=xterm-r6, use=klone+color, +# See the note on ICH/ICH1 VERSUS RMIR/SMIR near the end of file +xterm-nic|xterm with ich/ich1 suppressed for non-curses programs, + ich@, ich1@, + use=xterm, +# From: Mark Sheppard <kimble@mistral.co.uk>, 4 May 1996 +xterm1|xterm terminal emulator ignoring the alternate screen buffer, + rmcup@, smcup@, + use=xterm, + +# This describes the capabilities of color_xterm, an xterm variant from +# before ECMA-64 color support was folded into the main-line xterm release. +# This entry is straight from color_xterm's maintainer. +# From: Jacob Mandelson <jlm@ugcs.caltech.edu>, 09 Nov 1996 +# The README's with the distribution also say that it supports SGR 21, 24, 25 +# and 27, but they are not present in the terminfo or termcap. +color_xterm|cx|cx100|color_xterm color terminal emulator for X, + am, km, mir, msgr, xenl, + colors#8, cols#80, it#8, lines#65, pairs#64, + acsc=``aaffggjjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~, + bel=^G, bold=\E[1m, clear=\E[H\E[2J, cr=^M, + csr=\E[%i%p1%d;%p2%dr, cub=\E[%p1%dD, cub1=^H, + cud=\E[%p1%dB, cud1=^J, cuf=\E[%p1%dC, cuf1=\E[C, + cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA, cuu1=\E[A, + dch=\E[%p1%dP, dch1=\E[P, dl=\E[%p1%dM, dl1=\E[M, ed=\E[J, + el=\E[K, el1=\E[1K, enacs=\E(B\E)0, home=\E[H, ht=^I, + ich=\E[%p1%d@, il=\E[%p1%dL, il1=\E[L, ind=^J, + is1=\E[r\E[m\E[?7h\E[?4;6l\E[4l, ka1=\EOw, ka3=\EOy, + kb2=\EOu, kbs=^H, kc1=\EOq, kc3=\EOs, kcub1=\EOD, kcud1=\EOB, + kcuf1=\EOC, kcuu1=\EOA, kend=\E[8~, kent=\EOM, kf1=\E[11~, + kf10=\E[21~, kf11=\E[23~, kf12=\E[24~, kf2=\E[12~, + kf3=\E[13~, kf4=\E[14~, kf5=\E[15~, kf6=\E[17~, kf7=\E[18~, + kf8=\E[19~, kf9=\E[20~, khome=\E[7~, kich1=\E[2~, + kmous=\E[M, knp=\E[6~, kpp=\E[5~, op=\E[39;49m, rc=\E8, + rev=\E[7m, ri=\EM, rmacs=^O, rmam=\E[?7l, + rmcup=\E>\E[?41;1r, rmir=\E[4l, rmso=\E[27m, rmul=\E[24m, + rs1=\E(B\017\E[r\E[m\E[2J\E[H\E[?7h\E[?1;3;4;6l\E[4l\E<, + sc=\E7, setab=\E[4%p1%dm, setaf=\E[3%p1%dm, + sgr=\E[0%?%p1%p6%|%t;1%;%?%p2%t;4%;%?%p1%p3%|%t;7%;%?%p4%t;5%;m%?%p9%t\016%e\017%;, + sgr0=\E[m, smacs=^N, smam=\E[?7h, + smcup=\E[?1;41s\E[?1;41h\E=, smir=\E[4h, smso=\E[7m, + smul=\E[4m, + +# The 'nxterm' distributed with Redhat Linux is a slight rehack of +# xterm-sb_right-ansi-3d, which implements ANSI colors, but does not support +# SGR 39 or 49. SGR 0 does reset colors (along with everything else). This +# description is "compatible" with color_xterm, rxvt and XFree86 xterm, except +# that each of those implements the home, end, delete keys differently. +nxterm|xterm-color|generic color xterm, + ncv@, + op=\E[m, use=xterm-r6, use=klone+color, + +# From: Thomas Dickey <dickey@clark.net> 04 Oct 1997 +# Updated: Oezguer Kesim <kesim@math.fu-berlin.de> 02 Nov 1997 +# Notes: +# rxvt 2.21b uses +# smacs=\E(B\E)U^N, rmacs=\E(B\E)0^O, +# but some applications don't work with that. +# It also has an AIX extension +# box2=lqkxjmwuvtn, +# and +# ech=\E[%p1%dX, +# but the latter does not work correctly. +# +# The distributed terminfo says it implements hpa and vpa, but they are not +# implemented correctly, using relative rather than absolute positioning. +# +# rxvt is normally configured to look for "xterm" or "xterm-color" as $TERM. +# Since rxvt is not really compatible with xterm, it should be configured as +# "rxvt" (monochrome) and "rxvt-color". +rxvt-basic|rxvt terminal base (X Window System), + am, bce, eo, km, mir, msgr, xenl, xon, + cols#80, it#8, lines#24, + acsc=``aaffggjjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~, + bel=^G, blink=\E[5m, bold=\E[1m, civis=\E[?25l, + clear=\E[H\E[2J, cnorm=\E[?25h, cr=^M, + csr=\E[%i%p1%d;%p2%dr, cub=\E[%p1%dD, cub1=^H, + cud=\E[%p1%dB, cud1=^J, cuf=\E[%p1%dC, cuf1=\E[C, + cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA, cuu1=\E[A, + cvvis=\E[?25h, dch=\E[%p1%dP, dch1=\E[P, dl=\E[%p1%dM, + dl1=\E[M, ed=\E[J, el=\E[K, el1=\E[1K, enacs=\E(B\E)0, + flash=\E[?5h\E[?5l, home=\E[H, ht=^I, hts=\EH, + ich=\E[%p1%d@, ich1=\E[@, il=\E[%p1%dL, il1=\E[L, ind=^J, + is1=\E[?47l\E=\E[?1l, + is2=\E[r\E[m\E[2J\E[H\E[?7h\E[?1;3;4;6l\E[4l, + kDC=\E[3$, kEND=\E[8$, kHOM=\E[7$, kLFT=\E[d, kNXT=\E[6$, + kPRV=\E[5$, kRIT=\E[c, ka1=\EOw, ka3=\EOy, kb2=\EOu, kbs=^H, + kc1=\EOq, kc3=\EOs, kcbt=\E[Z, kcub1=\E[D, kcud1=\E[B, + kcuf1=\E[C, kcuu1=\E[A, kdch1=\E[3~, kel=\E[8\^, + kend=\E[8~, kent=\EOM, kf0=\E[21~, kf1=\E[11~, kf10=\E[21~, + kf11=\E[23~, kf12=\E[24~, kf13=\E[25~, kf14=\E[26~, + kf15=\E[28~, kf16=\E[29~, kf17=\E[31~, kf18=\E[32~, + kf19=\E[33~, kf2=\E[12~, kf20=\E[34~, kf3=\E[13~, + kf4=\E[14~, kf5=\E[15~, kf6=\E[17~, kf7=\E[18~, kf8=\E[19~, + kf9=\E[20~, kfnd=\E[1~, khome=\E[7~, kich1=\E[2~, + kmous=\E[M, knp=\E[6~, kpp=\E[5~, kslt=\E[4~, rc=\E8, + rev=\E[7m, ri=\EM, rmacs=^O, rmcup=\E[2J\E[?47l\E8, + rmir=\E[4l, rmkx=\E>, rmso=\E[27m, rmul=\E[24m, + rs1=\E>\E[1;3;4;5;6l\E[?7h\E[m\E[r\E[2J\E[H, + rs2=\E[r\E[m\E[2J\E[H\E[?7h\E[?1;3;4;6l\E[4l\E>, + s0ds=\E(B, s1ds=\E(0, sc=\E7, sgr0=\E[0m\017, smacs=^N, + smcup=\E7\E[?47h, smir=\E[4h, smkx=\E=, smso=\E[7m, + smul=\E[4m, tbc=\E[3g, +rxvt|rxvt terminal emulator (X Window System), + colors#8, pairs#64, + op=\E[39;49m, setab=\E[%p1%{40}%+%dm, + setaf=\E[%p1%{30}%+%dm, sgr0=\E[m\017, use=rxvt-basic, + +# These (xtermc and xtermm) are distributed with Solaris. They refer to a +# variant of xterm which is apparently no longer supported, but are interesting +# because they illustrate SVr4 curses mouse controls - T.Dickey +xtermm|xterm terminal emulator (monocrome), + am, km, mir, msgr, xenl, + btns#3, cols#80, it#8, lines#24, + acsc=``aaffggjjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~, + bel=^G, blink=@, bold=\E[1m, clear=\E[H\E[2J, cr=^M, + csr=\E[%i%p1%d;%p2%dr, cub=\E[%p1%dD, cub1=\E[1D, + cud=\E[%p1%dB, cud1=^J, cuf=\E[%p1%dC, cuf1=\E[C, + cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA, cuu1=\E[A, + dch=\E[%p1%dP, dch1=\E[P, dl=\E[%p1%dM, dl1=\E[M, ed=\E[J, + el=\E[K, el1=\E[1K$<3>, enacs=\E(B\E)0, getm=\E[%p1%dY, + home=\E[H, ht=^I, hts=\EH, ich=\E[%p1%d@, ich1=\E[@, + il=\E[%p1%dL, il1=\E[L, ind=^J, ka1=\EOq, ka3=\EOs, kb2=\EOr, + kbs=^H, kc1=\EOp, kc3=\EOn, kcub1=\EOD, kcud1=\EOB, + kcuf1=\EOC, kcuu1=\EOA, kend=\E[Y, kent=\EOM, kf0=\EOy, + kf1=\EOP, kf10=\EOY, kf11=\EOZ, kf12=\EOA, kf2=\EOQ, + kf3=\EOR, kf4=\EOS, kf5=\EOT, kf6=\EOU, kf7=\EOV, kf8=\EOW, + kf9=\EOX, khome=\E[H, kmous=\E[^_, knp=\E[U, kpp=\E[V, + rc=\E8, reqmp=\E[492Z, rev=\E[7m, ri=\EM, rmacs=^O, + rmcup=\E@0\E[?4r, rmso=\E[m, + rs1=\E>\E[1;3;4;5;6l\E[?7h\E[m\E[r\E[2J\E[H, + rs2=\E>\E[?3l\E[?4l\E[?5l\E[?7h\E[?8h, sc=\E7, + sgr=\E[0%?%p1%p6%|%t;1%;%?%p2%t;4%;%?%p1%p3%|%t;7%;%?%p4%t;5%;m%?%p9%t\016%e\017%;, + sgr0=\E[m\017, smacs=^N, smcup=\E@0\E[?4s\E[?4h\E@1, + smso=\E[7m, tbc=\E[3g, + +xtermc|xterm terminal emulator (color), + colors#8, ncv#7, pairs#64, + op=\E[100m, setab=\E[4%p1%dm, setaf=\E[3%p1%dm, + setb=\E[4%?%p1%{1}%=%t4%e%p1%{3}%=%t6%e%p1%{4}%=%t1%e%p1%{6}%=%t3%e%p1%d%;m, + setf=\E[3%?%p1%{1}%=%t4%e%p1%{3}%=%t6%e%p1%{4}%=%t1%e%p1%{6}%=%t3%e%p1%d%;m, + use=xtermm, + +# From: David J. MacKenzie <djm@va.pubnix.com> 20 Apr 1995 +# Here's a termcap entry I've been using for xterm_color, which comes +# with BSD/OS 2.0, and the X11R6 contrib tape too I think. Besides the +# color stuff, I also have a status line defined as the window manager +# title bar. [I have translated it to terminfo -- ESR] +xterm-pcolor|xterm with color used for highlights and status line, + bold=\E[1m\E[43m, rev=\E[7m\E[34m, smso=\E[7m\E[31m, + smul=\E[4m\E[42m, + use=xterm+sl, use=xterm-r6, + +# HP ships this, except for the pb#9600 which was merged in from BSD termcap. +# (hpterm: added empty <acsc>, we have no idea what ACS chars look like --esr) +hpterm|X-hpterm|hp X11 terminal emulator, + am, da, db, mir, xhp, + cols#80, lh#2, lines#24, lm#0, lw#8, nlab#8, pb#9600, xmc#0, + acsc=, bel=^G, bold=\E&dB, cbt=\Ei, clear=\E&a0y0C\EJ, cr=^M, + cub1=^H, cud1=\EB, cuf1=\EC, cup=\E&a%p1%dy%p2%dC, + cuu1=\EA, dch1=\EP, dim=\E&dH, dl1=\EM, ed=\EJ$<1>, el=\EK, + hpa=\E&a%p1%dC, ht=^I, hts=\E1, il1=\EL, ind=^J, kbs=^H, + kclr=\EJ, kctab=\E2, kcub1=\ED, kcud1=\EB, kcuf1=\EC, + kcuu1=\EA, kdch1=\EP, kdl1=\EM, ked=\EJ, kel=\EK, kf1=\Ep, + kf2=\Eq, kf3=\Er, kf4=\Es, kf5=\Et, kf6=\Eu, kf7=\Ev, kf8=\Ew, + khome=\Eh, khts=\E1, kich1=\EQ, kil1=\EL, kind=\ES, kll=\EF, + knp=\EU, kpp=\EV, kri=\ET, krmir=\ER, ktbc=\E3, meml=\El, + memu=\Em, pfkey=\E&f%p1%dk%p2%l%dL%p2%s, + pfloc=\E&f1a%p1%dk%p2%l%dL%p2%s, + pfx=\E&f2a%p1%dk%p2%l%dL%p2%s, + pln=\E&f%p1%dk%p2%l%dd0L%p2%s, rev=\E&dB, ri=\ET, + rmacs=^O, rmir=\ER, rmkx=\E&s0A, rmln=\E&j@, rmso=\E&d@, + rmul=\E&d@, + sgr=\E&d%?%p7%t%{115}%c%;%p1%p3%|%p6%|%{2}%*%p2%{4}%*%+%p4%+%p5%{8}%*%+%{64}%+%c%?%p9%t%'\016'%c%e%'\017'%c%;, + sgr0=\E&d@, smacs=^N, smir=\EQ, smkx=\E&s1A, smln=\E&jB, + smso=\E&dJ, smul=\E&dD, tbc=\E3, vpa=\E&a%p1%dY, + +# This entry describes an xterm with Sun-style function keys enabled +# via the X resource setting "xterm*sunFunctionKeys:true" +# To understand <kf11>/<kf12> note that L1,L2 and F11,F12 are the same. +# The <kf13>...<kf20> keys are L3-L10. We don't set <kf16=\E[197z> +# because we want it to be seen as <kcpy>. +# The <kf31>...<kf45> keys are R1-R15. We treat some of these in accordance +# with their Sun keyboard labels instead. +# From: Simon J. Gerraty <sjg@zen.void.oz.au> 10 Jan 1996 +xterm-sun|xterm with sunFunctionKeys true, + kb2=\E[218z, kcpy=\E[197z, kend=\E[220z, kf1=\E[224z, + kf10=\E[233z, kf11=\E[192z, kf12=\E[193z, kf13=\E[194z, + kf14=\E[195z, kf15=\E[196z, kf17=\E[198z, kf18=\E[199z, + kf19=\E[200z, kf2=\E[225z, kf20=\E[201z, kf3=\E[226z, + kf31=\E[208z, kf32=\E[209z, kf33=\E[210z, kf34=\E[211z, + kf35=\E[212z, kf36=\E[213z, kf38=\E[215z, kf4=\E[227z, + kf40=\E[217z, kf42=\E[219z, kf44=\E[221z, kf5=\E[228z, + kf6=\E[229z, kf7=\E[230z, kf8=\E[231z, kf9=\E[232z, + kfnd=\E[200z, khlp=\E[196z, khome=\E[214z, kich1=\E[2z, + knp=\E[222z, kpp=\E[216z, kund=\E[195z, + use=xterm, +xterms-sun|small (80x24) xterm with sunFunctionKeys true, + cols#80, lines#24, use=xterm-sun, + +# This is for the extensible terminal emulator on the X11R6 contrib tape. +emu|emu native mode, + mir, msgr, xon, + colors#15, cols#80, it#8, lines#24, pairs#64, vt#200, + acsc=61a\202f\260g2j\213k\214l\215m\216n\217o\220q\222s\224t\225u\226v\227w\230x\231~\244, + bel=^G, blink=\ES\EW, bold=\ES\EU, civis=\EZ, + clear=\EP\EE0;0;, cnorm=\Ea, cr=^M, csr=\Ek%p1%d;%p2%d;, + cub=\Eq-%p1%d;, cub1=^H, cud=\Ep%p1%d;, cud1=\EB, + cuf=\Eq%p1%d;, cuf1=\ED, cup=\EE%p1%d;%p2%d;, + cuu=\Ep-%p1%d;, cuu1=\EA, cvvis=\Ea, dch=\EI%p1%d;, + dch1=\EI1;, dl=\ER%p1%d;, dl1=\ER1;, ech=\Ej%p1%d;, ed=\EN, + el=\EK, el1=\EL, enacs=\0, home=\EE0;0;, ht=^I, hts=\Eh, + il=\EQ%p1%d;, il1=\EQ1;, ind=\EG, is2=\ES\Er0;\Es0;, + kbs=^H, kcub1=\EC, kcud1=\EB, kcuf1=\ED, kcuu1=\EA, + kdch1=\177, kent=^M, kf0=\EF00, kf1=\EF01, kf10=\EF10, + kf11=\EF11, kf12=\EF12, kf13=\EF13, kf14=\EF14, kf15=\EF15, + kf16=\EF16, kf17=\EF17, kf18=\EF18, kf19=\EF19, kf2=\EF02, + kf20=\EF20, kf3=\EF03, kf4=\EF04, kf5=\EF05, kf6=\EF06, + kf7=\EF07, kf8=\EF08, kf9=\EF09, kfnd=\Efind, kich1=\Eins, + knp=\Enext, kpp=\Eprior, kslt=\Esel, oc=\Es0;\Er0;, + rev=\ES\ET, ri=\EF, rmacs=\0, rmir=\EX, rmso=\ES, rmul=\ES, + rs2=\ES\Es0;\Er0;, setab=\Es%i%p1%d;, + setaf=\Er%i%p1%d;, sgr0=\ES, smacs=\0, smir=\EY, + smso=\ES\ET, smul=\ES\EV, tbc=\Ej, + +#### MGR +# +# MGR is a Bell Labs window system lighter-weight than X. +# These entries describe MGR's xterm-equivalent. +# They are courtesy of Vincent Broman <broman@nosc.mil> 14 Jan 1997 +# + +mgr|Bellcore MGR (non X) window system terminal emulation, + am, km, + bel=^G, bold=\E2n, civis=\E9h, clear=^L, cnorm=\Eh, cr=^M, + csr=\E%p1%d;%p2%dt, cub1=^H, cud1=\Ef, cuf1=\Er, + cup=\E%p2%d;%p1%dM, cuu1=\Eu, cvvis=\E0h, + dch=\E%p1%dE$<5>, dch1=\EE, dl=\E%p1%dd$<3*>, + dl1=\Ed$<3>, ed=\EC, el=\Ec, hd=\E1;2f, ht=^I, hu=\E1;2u, + ich=\E%p1%dA$<5>, ich1=\EA, il=\E%p1%da$<3*>, + il1=\Ea$<3>, ind=^J, kbs=^H, kcub1=\E[D, kcud1=\E[B, + kcuf1=\E[C, kcuu1=\E[A, nel=^M^J, rev=\E1n, rmam=\E5S, + rmso=\E0n, rmul=\E0n, sgr0=\E0n, smam=\E5s, smso=\E1n, + smul=\E4n, +mgr-sun|Mgr window with Sun keyboard, + ka1=\E[214z, ka3=\E[216z, kb2=\E[218z, kc1=\E[220z, + kc3=\E[222z, kcpy=\E197z, kend=\E[220z, kent=\E[250z, + kf1=\E[224z, kf10=\E[233z, kf11=\E[234z, kf12=\E[235z, + kf2=\E[225z, kf3=\E[226z, kf4=\E[227z, kf5=\E[228z, + kf6=\E[229z, kf7=\E[230z, kf8=\E[231z, kf9=\E[232z, + kfnd=\E[200z, khlp=\E[207z, khome=\E[214z, knp=\E[222z, + kopn=\E[198z, kpp=\E[216z, kund=\E[195z, + use=mgr, +mgr-linux|Mgr window with Linux keyboard, + ka1=\E[H, ka3=\E[5~, kb2=\E[G, kc1=\E[Y, kc3=\E[6~, + kdch1=\E[3~, kend=\E[4~, kf0=\E[[J, kf1=\E[[A, kf10=\E[21~, + kf11=\E[23~, kf12=\E[24~, kf2=\E[[B, kf3=\E[[C, kf4=\E[[D, + kf5=\E[[E, kf6=\E[17~, kf7=\E[18~, kf8=\E[19~, kf9=\E[20~, + khome=\E[1~, knp=\E[6~, kpp=\E[5~, + use=mgr, + +######## UNIX VIRTUAL TERMINALS, VIRTUAL CONSOLES, AND TELNET CLIENTS +# + +# Columbus UNIX virtual terminal. This terminal also appears in +# UNIX 4.0 and successors as line discipline 1 (?), but is +# undocumented and does not really work quite right. +cbunix|cb unix virtual terminal, + am, da, db, + cols#80, lines#24, lm#0, + bel=^G, clear=\EL, cr=^M, cub1=^H, cud1=^J, cuf1=\EC, + cup=\EG%p2%c%p1%c, cuu1=\EA, dch1=\EM, dl1=\EN, ed=\EL, + el=\EK, ich1=\EO, il1=\EP, ind=^J, kcub1=\ED, kcud1=\EB, + kcuf1=\EC, kcuu1=\EA, khome=\EE, rmso=\Eb^D, rmul=\Eb^A, + smso=\Ea^D, smul=\Ea^A, +# (vremote: removed obsolete ":nl@:" -- esr) +vremote|virtual remote terminal, + am@, + cols#79, use=cbunix, + +pty|4bsd pseudo teletype, + cup=\EG%p1%{32}%+%c%p2%{32}%+%c, rmso=\Eb$, rmul=\Eb!, + smso=\Ea$, smul=\Ea!, + use=cbunix, + +# The codes supported by the term.el terminal emulation in GNU Emacs 19.30 +eterm|gnu emacs term.el terminal emulation, + am, mir, xenl, + cols#80, lines#24, + bel=^G, bold=\E[1m, clear=\E[H\E[J, cr=^M, + csr=\E[%i%p1%d;%p2%dr, cub=\E[%p1%dD, cub1=^H, + cud=\E[%p1%dB, cud1=^J, cuf=\E[%p1%dC, cuf1=\E[C, + cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA, cuu1=\E[A, + dch=\E[%p1%dP, dch1=\E[P, dl=\E[%p1%dM, dl1=\E[M, ed=\E[J, + el=\E[K, el1=\E[1K, home=\E[H, ht=^I, ich=\E[%p1%d@, + il=\E[%p1%dL, il1=\E[L, ind=^J, rev=\E[7m, + rmcup=\E[2J\E[?47l\E8, rmir=\E[4l, rmso=\E[m, rmul=\E[m, + sgr0=\E[m, smcup=\E7\E[?47h, smir=\E[4h, smso=\E[7m, + smul=\E[4m, + +# Entries for use by the FSF's `screen' program. The screen and +# screen-w entries came with version 3.7.1. The screen2 and screen3 entries +# come from University of Wisconsin and may be older. +# (screen: added <cnorm> on ANSI model -- esr) + +screen|VT 100/ANSI X3.64 virtual terminal, + am, km, mir, msgr, xenl, + colors#8, cols#80, it#8, lines#24, pairs#64, + acsc=++\,\,--..00``aaffgghhiijjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~, + bel=^G, blink=\E[5m, bold=\E[1m, cbt=\E[Z, civis=\E[?25l, + clear=\E[H\E[J, cnorm=\E[34h\E[?25h, cr=^M, + csr=\E[%i%p1%d;%p2%dr, cub=\E[%p1%dD, cub1=^H, + cud=\E[%p1%dB, cud1=^J, cuf=\E[%p1%dC, cuf1=\E[C, + cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA, cuu1=\EM, + cvvis=\E[34l, dch=\E[%p1%dP, dch1=\E[P, dl=\E[%p1%dM, + dl1=\E[M, ed=\E[J, el=\E[K, el1=\E[1K, enacs=\E(B\E)0, + flash=\Eg, home=\E[H, ht=^I, hts=\EH, ich=\E[%p1%d@, + il=\E[%p1%dL, il1=\E[L, ind=^J, is2=\E)0, kbs=^H, kcub1=\EOD, + kcud1=\EOB, kcuf1=\EOC, kcuu1=\EOA, kdch1=\E[3~, kf1=\EOP, + kf10=\E[21~, kf11=\E[23~, kf12=\E[24~, kf2=\EOQ, kf3=\EOR, + kf4=\EOS, kf5=\E[15~, kf6=\E[17~, kf7=\E[18~, kf8=\E[19~, + kf9=\E[20~, khome=\E[1~, kich1=\E[2~, kll=\E[4~, knp=\E[6~, + kpp=\E[5~, nel=\EE, rc=\E8, rev=\E[7m, ri=\EM, rmacs=^O, + rmir=\E[4l, rmkx=\E[?1l\E>, rmso=\E[23m, rmul=\E[24m, + rs2=\Ec, sc=\E7, sgr0=\E[m, smacs=^N, smir=\E[4h, + smkx=\E[?1h\E=, smso=\E[3m, smul=\E[4m, tbc=\E[3g, + use=ecma+color, + +screen-w|VT 100/ANSI X3.64 virtual terminal with 132 cols, + cols#132, use=screen, + +screen2|old VT 100/ANSI X3.64 virtual terminal, + cols#80, it#8, lines#24, + cbt=\E[Z, clear=\E[2J\E[H, cr=^M, cub=\E[%p1%dD, cub1=^H, + cud=\E[%p1%dB, cud1=\E[B, cuf=\E[%p1%dC, cuf1=\E[C, + cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA, cuu1=\E[A, + dch=\E[%p1%dP, dch1=\E[P, dl=\E[%p1%dM, dl1=\E[M, ed=\E[J, + el=\E[K, ht=^I, hts=\EH, ich=\E[%p1%d@, ich1=, il=\E[%p1%dL, + il1=\E[L, ind=^J, kbs=^H, kcub1=\ED, kcud1=\EB, kcuf1=\EC, + kcuu1=\EA, kf0=\E~, kf1=\ES, kf2=\ET, kf3=\EU, kf4=\EV, + kf5=\EW, kf6=\EP, kf7=\EQ, kf8=\ER, kf9=\E0I, khome=\EH, + nel=^M^J, rc=\E8, ri=\EM, rmir=\E[4l, rmso=\E[23m, + rmul=\E[24m, rs1=\Ec, sc=\E7, sgr0=\E[m, smir=\E[4h, + smso=\E[3m, smul=\E[4m, tbc=\E[3g, +# (screen3: removed unknown ":xv:LP:G0:" -- esr) +screen3|older VT 100/ANSI X3.64 virtual terminal, + km, mir, msgr, + cols#80, it#8, lines#24, + bel=^G, blink=\E[5m, bold=\E[1m, cbt=\E[Z, clear=\E[H\E[J, + cr=^M, csr=\E[%i%p1%d;%p2%dr, cub=\E[%p1%dD, cub1=^H, + cud=\E[%p1%dB, cud1=^J, cuf=\E[%p1%dC, cuf1=\E[C, + cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA, cuu1=\EM, + dch=\E[%p1%dP, dch1=\E[P, dl=\E[%p1%dM, dl1=\E[M, ed=\E[J, + el=\E[K, home=\E[H, ht=^I, hts=\EH, ich=\E[%p1%d@, + il=\E[%p1%dL, il1=\E[L, ind=^J, is2=\E)0, kbs=^H, kcub1=\EOD, + kcud1=\EOB, kcuf1=\EOC, kcuu1=\EOA, kf1=\EOP, kf2=\EOQ, + kf3=\EOR, kf4=\EOS, nel=\EE, rc=\E8, rev=\E[7m, ri=\EM, + rmir=\E[4l, rmkx=\E>, rmso=\E[23m, rmul=\E[24m, rs1=\Ec, + sc=\E7, sgr0=\E[m, smir=\E[4h, smkx=\E=, smso=\E[3m, + smul=\E[4m, tbc=\E[3g, + +# Francesco Potorti <F.Potorti@cnuce.cnr.it>: +# NCSA telnet is one of the most used telnet clients for the Macintosh. It has +# been maintained until recently by the National Center for Supercomputer +# Applications, and it is feature rich, stable and free. It can be downloaded +# from www.ncsa.edu. This terminfo description file is based on xterm-vt220, +# xterm+sl, and the docs at NCSA. It works well. +# +# NCSA Telnet 2.6 for Macintosh in vt220 8-bit emulation mode +# The terminal options should be set as follows: +# Xterm sequences ON +# use VT wrap mode ON +# use Emacs arrow keys OFF +# CTRL-COMND is Emacs meta ON +# 8 bit mode ON +# answerback string: "ncsa-vt220-8" +# setup keys: all disabled +# +# Application mode is not used. The documented function-key mapping refers to +# the Apple Extended Keyboard (e.g., NCSA Telnet's F1 corresponds to a VT220 +# F6). We use the VT220-style codes, however, since the numeric keypad (VT100) +# PF1-PF4 are available on some keyboards and many applications require these +# as F1-F4. +# +# Other special mappings: +# Apple VT220 +# HELP Find +# HOME Insert here +# PAGEUP Remove +# DEL Select +# END Prev Screen +# PAGEDOWN Next Screen +# +# Though it supports ANSI color, NCSA Telnet uses color to represent blinking +# text. +# +# The status-line manipulation is a mapping of the xterm-compatible control +# sequences for setting the window-title. So you must use tsl and fsl in +# pairs, since the latter ends the string that is loaded to the window-title. +ncsa-m|ncsa-vt220|ncsa-vt220-8|NCSA Telnet 2.6 for Macintosh in vt220-8 mode, + am, hs, km, mir, msgr, xenl, + acsc=``aaffggiijjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~, + bel=^G, blink=\E[5m, bold=\E[1m, civis=\E[?25l, + clear=\E[H\E[2J, cnorm=\E[?25h, cr=^M, + csr=\E[%i%p1%d;%p2%dr, cub=\E[%p1%dD, cub1=^H, + cud=\E[%p1%dB, cud1=^J, cuf=\E[%p1%dC, cuf1=\E[C, + cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA, cuu1=\E[A, + dch=\E[%p1%dP, dch1=\E[P, dl=\E[%p1%dM, dl1=\E[M, + dsl=\E]0;\007, ed=\E[J, el=\E[K, el1=\E[1K, enacs=\E)0, + flash=\E[?5h\E[?5l, fsl=^G, home=\E[H, ht=^I, hts=\EH, + ich=\E[%p1%d@, if=/usr/share/tabset/vt100, + il=\E[%p1%dL, il1=\E[L, ind=^J, + is2=\E7\E[r\E[m\E[?7h\E[?1;4;6l\E[4l\E8\E>, kbs=^H, + kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A, + kdch1=\E[4~, kend=\E[5~, kf1=\EOP, kf10=\E[21~, + kf11=\E[23~, kf12=\E[24~, kf13=\E[25~, kf14=\E[26~, + kf15=\E[28~, kf16=\E[29~, kf17=\E[31~, kf18=\E[32~, + kf19=\E[33~, kf2=\EOQ, kf20=\E[34~, kf3=\EOR, kf4=\EOS, + kf6=\E[17~, kf7=\E[18~, kf8=\E[19~, kf9=\E[20~, khlp=\E[1~, + khome=\E[2~, knp=\E[6~, kpp=\E[3~, mc4=\E[4i, mc5=\E[5i, + rc=\E8, rev=\E[7m, rf=/usr/share/tabset/vt100, ri=\EM, + rmacs=^O, rmam=\E[?7l, rmcup=\E[2J\E8, rmir=\E[4l, + rmso=\E[27m, rmul=\E[24m, + rs2=\E7\E[r\E[m\E[?7h\E[?1;4;6l\E[4l\E8\E>, sc=\E7, + sgr=\E[0%?%p6%t;1%;%?%p2%t;4%;%?%p4%t;5%;%?%p1%p3%|%t;7%;m%?%p9%t\E(0%e\E(B%;, + sgr0=\E[m\017, smacs=^N, smam=\E[?7h, smcup=\E7, + smir=\E[4h, smso=\E[7m, smul=\E[4m, tbc=\E[3g, tsl=\E]0;, + u6=\E[%i%d;%dR, u7=\E[6n, u8=\E[?62;1;6c, u9=\E[c, +ncsa|NCSA Telnet 2.7 for Macintosh in vt220-8 mode, + use=ncsa-m, use=klone+color, +ncsa-ns|NCSA Telnet 2.7 for Macintosh in vt220-8 mode, + hs@, + dsl@, fsl@, tsl@, use=ncsa, +ncsa-m-ns|NCSA Telnet 2.6 for Macintosh in vt220-8 mode, + hs@, + dsl@, fsl@, tsl@, use=ncsa-m, + +#### Pilot Pro Palm-Top +# +# From: Jason Downs <downsj@downsj.com>, 15 Jun 1997 (Top Gun Telnet's author) +pilot|tgtelnet|Top Gun Telnet on the Palm Pilot Professional, + am, xenl, + cols#39, lines#16, + bel=^G, clear=\Ec, cr=^M, cub1=^H, cud1=^J, + cup=\Em%p1%{32}%+%c%p2%{32}%+%c, home=\Em\s\s, ht=^I, + ind=^J, kbs=^H, kcub1=^H, kcud1=^J, knp=^L, kpp=^K, nel=\Em~\s, + rmso=\EB, smso=\Eb, + +######## COMMERCIAL WORKSTATION CONSOLES +# + +#### Alpha consoles +# + +# This is from the OSF/1 Release 1.0 termcap file +pccons|pcconsole|ANSI (mostly) Alpha PC console terminal emulation, + am, xon, + cols#80, lines#25, + bel=^G, clear=\E[H\E[2J, cr=^M, cub1=^H, cud1=^J, cuf1=\E[C, + cup=\E[%i%p1%d;%p2%dH, cuu1=\E[A, dch1=\E[P, dl1=\E[M, + el=\E[K, home=\E[H, ht=^I, ich1=\E[@, il1=\E[L, kbs=^H, + kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A, khome=\E[H, + nel=^M^J, rev=\E[7m, rmso=\E[m, sgr0=\E[m, smso=\E[7m, + +#### Sun consoles +# + +# :is1: resets scrolling region in case a previous user had used "tset vt100" +oldsun|Sun Microsystems Workstation console, + am, km, mir, msgr, + cols#80, it#8, lines#34, + bel=^G, clear=^L, cr=^M, cub1=^H, cud1=\E[B, cuf1=\E[C, + cup=\E[%i%p1%d;%p2%dH, cuu1=\E[A, dch=\E[%p1%dP, + dch1=\E[P, dl=\E[%p1%dM, dl1=\E[M, ed=\E[J, el=\E[K, ht=^I, + ich=\E[%p1%d@, ich1=\E[@, il=\E[%p1%dL, il1=\E[L, ind=^J, + is1=\E[1r, kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A, + kf1=\EOP, kf2=\EOQ, kf3=\EOR, kf4=\EOS, khome=\E[H, + rmso=\E[m, sgr0=\E[m, smso=\E[7m, +# From: Alexander Lukyanov <lav@video.yars.free.net>, 14 Nov 1995 +# <lines> capability later corrected by J.T. Conklin <jtc@cygnus.com> +# SGR 1, 4 aren't supported - removed bold/underline (T.Dickey 17 Jan 1998) +sun-il|Sun Microsystems console with working insert-line, + am, km, msgr, + cols#80, lines#34, + bel=^G, bold@, clear=^L, cr=^M, cub1=^H, cud1=^J, cuf1=\E[C, + cup=\E[%i%p1%d;%p2%dH, cuu1=\E[A, dch=\E[%p1%dP, + dch1=\E[P, dl=\E[%p1%dM, dl1=\E[M, ed=\E[J, el=\E[K, ht=^I, + ich=\E[%p1%d@, ich1=\E[@, il=\E[%p1%dL, il1=\E[L, ind=^J, + kb2=\E[218z, kbs=^H, kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C, + kcuu1=\E[A, kdch1=\177, kend=\E[220z, kf1=\E[224z, + kf10=\E[233z, kf11=\E[234z, kf12=\E[235z, kf2=\E[225z, + kf3=\E[226z, kf4=\E[227z, kf5=\E[228z, kf6=\E[229z, + kf7=\E[230z, kf8=\E[231z, kf9=\E[232z, khome=\E[214z, + knp=\E[222z, kopt=\E[194z, kpp=\E[216z, kres=\E[193z, + kund=\E[195z, rev=\E[7m, rmso=\E[m, rmul@, rs2=\E[s, + sgr=\E[0%?%p6%t;1%;%?%p2%t;4%;%?%p1%p3%|%t;7%;m, + sgr0=\E[m, smso=\E[7m, smul@, u8=\E[1t, u9=\E[11t, +# On a SparcStation 5, <il1>/<il> flake out on the last line. +# Unfortunately, without them the terminal has no way to scroll. +sun-ss5|Sun SparcStation 5 console, + il@, il1@, use=sun-il, +# If you are using an SS5, change the sun definition to use sun-ss5. +sun|sun1|sun2|Sun Microsystems Inc. workstation console, + use=sun-il, + +# From: <john@ucbrenoir> Tue Sep 24 13:14:44 1985 +sun-s|Sun Microsystems Workstation window with status line, + hs, + dsl=\E]l\E\\, fsl=\E\\, tsl=\E]l, use=sun, +sun-e-s|sun-s-e|Sun Microsystems Workstation with status hacked for emacs, + hs, + dsl=\E]l\E\\, fsl=\E\\, tsl=\E]l, use=sun-e, +sun-48|Sun 48-line window, + cols#80, lines#48, use=sun, +sun-34|Sun 34-line window, + cols#80, lines#34, use=sun, +sun-24|Sun 24-line window, + cols#80, lines#24, use=sun, +sun-17|Sun 17-line window, + cols#80, lines#17, use=sun, +sun-12|Sun 12-line window, + cols#80, lines#12, use=sun, +sun-1|Sun 1-line window for sysline, + eslok, hs, + cols#80, lines#1, + dsl=^L, fsl=\E[K, tsl=^M, use=sun, +sun-e|sun-nic|sune|Sun Microsystems Workstation without insert character, + ich1@, rmir@, smir@, + use=sun, +sun-c|sun-cmd|Sun Microsystems Workstation console with scrollable history, + lines#35, + rmcup=\E[>4h, smcup=\E[>4l, use=sun, + +#### Iris consoles +# + +# (wsiris: this had extension capabilities +# :HS=\E7F2:HE=\E7F7:\ +# :CT#2:CZ=*Bblack,red,green,yellow,blue,magenta,cyan,*Fwhite: +# See the note on Iris extensions near the end of this file. +# Finally, removed suboptimal <clear>=\EH\EJ and added <cud1> & +# <flash> from BRL -- esr) +wsiris|iris40|iris emulating a 40 line visual 50 (approximately), + am, + cols#80, it#8, lines#40, + bel=^G, clear=\Ev, cnorm=\E>, cub1=^H, cud1=\EB, cuf1=\EC, + cup=\EY%p1%{32}%+%c%p2%{32}%+%c, cuu1=\EA, cvvis=\E;, + dim=\E7F2, dl1=\EM, ed=\EJ, el=\EK, + flash=\E7F4\E7B1\013\E7F7\E7B0, home=\EH, ht=^I, il1=\EL, + ind=^J, is2=\E7B0\E7F7\E7C2\E7R3, kcub1=\ED, kcud1=\EB, + kcuf1=\EC, kcuu1=\EA, kf0=\E0, kf1=\E1, kf2=\E2, kf3=\E3, + kf4=\E4, kf5=\E5, kf6=\E6, kf7=\E7, kf8=\E8, kf9=\E9, ri=\EI, + rmso=\E0@, rmul=\E7R3\E0@, sgr0=\E7F7, smso=\E9P, + smul=\E7R2\E9P, + +#### NeWS consoles +# +# Console terminal windows under the NeWS (Sun's Display Postscript windowing +# environment). Note: these have nothing to do with Sony's News workstation +# line. +# + +# Entry for NeWS's psterm from Eric Messick & Hugh Daniel +# (psterm: unknown ":sl=\EOl:el=\ENl:" removed -- esr) +psterm|psterm-basic|NeWS psterm-80x34, + am, hs, km, ul, + cols#80, it#8, lines#34, + blink=\EOb, bold=\EOd, clear=^L, csr=\EE%p1%d;%p2%d;, + cub1=\ET, cud1=\EP, cuf1=\EV, cup=\E%p1%d;%p2%d;, cuu1=\EY, + dch1=\EF, dl1=\EK, ed=\EB, el=\EC, flash=\EZ, fsl=\ENl, + home=\ER, ht=^I, il1=\EA, ind=\EW, is1=\EN*, kcub1=\E[D, + kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A, ll=\EU, rc=^\, rev=\EOr, + ri=\EX, rmcup=\ENt, rmir=\ENi, rmso=\ENo, rmul=\ENu, sc=^], + sgr0=\EN*, smcup=\EOt, smir=\EOi, smso=\EOo, smul=\EOu, + tsl=\EOl, +psterm-96x48|NeWS psterm 96x48, + cols#96, lines#48, use=psterm, +psterm-90x28|NeWS psterm 90x28, + cols#90, lines#28, use=psterm, +psterm-80x24|NeWS psterm 80x24, + cols#80, lines#24, use=psterm, +# This is a faster termcap for psterm. Warning: if you use this termcap, +# some control characters you type will do strange things to the screen. +# (psterm-fast: unknown ":sl=^Ol:el=^Nl:" -- esr) +psterm-fast|NeWS psterm fast version (flaky ctrl chars), + am, hs, km, ul, + cols#80, it#8, lines#34, + blink=^Ob, bold=^Od, clear=^L, csr=\005%p1%d;%p2%d;, + cub1=^T, cud1=^P, cuf1=^V, cup=\004%p1%d;%p2%d;, cuu1=^Y, + dch1=^F, dl1=^K, ed=^B, el=^C, flash=^Z, fsl=^Nl, home=^R, ht=^I, + il1=^A, ind=^W, is1=^N*, kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C, + kcuu1=\E[A, ll=^U, rc=^\, rev=^Or, ri=^X, rmcup=^Nt, rmir=^Ni, + rmso=^No, rmul=^Nu, sc=^], sgr0=^N*, smcup=^Ot, smir=^Oi, + smso=^Oo, smul=^Ou, tsl=^Ol, + +#### NeXT consoles +# +# Use `glasstty' for the Workspace application +# + +# From: Dave Wetzel <dave@turbocat.snafu.de> 22 Dec 1995 +next|NeXT console, + am, xt, + cols#80, it#8, lines#24, + bel=^G, clear=^L, cr=^M, cub1=^H, cud1=^J, cuf1=\E[C, + cup=\E[%i%p1%d;%p2%dH, cuu1=\E[A, el=\E[K, home=\E[H, + ht=^I, ind=^J, kbs=^H, kcub1=^H, kcud1=^J, nel=^M^J, + rmso=\E[4;1m, sgr0=\E[m, smso=\E[4;2m, +nextshell|NeXT Shell application, + am, + cols#80, + bel=^G, cr=^M, cub1=^H, cud1=^J, ht=^I, kbs=^H, kcub1=^H, + kcud1=^J, nel=^M^J, + +#### Sony NEWS workstations +# + +# (news-unk: this had :KB=news: -- esr) +news-unk|SONY NEWS vt100 emulator common entry, + am, xenl, + cols#80, + bel=^G, blink=\E[5m, bold=\E[1m, clear=\E[H\E[2J, cr=^M, + csr=\E[%i%p1%d;%p2%dr, cub1=^H, cud1=^J, cuf1=\E[C, + cup=\E[%i%p1%d;%p2%dH, cuu1=\E[A, dl=\E[%p1%dM, dl1=\E[M, + ed=\E[J, el=\E[K, home=\E[H, ht=^I, + if=/usr/lib/tabset/vt100, il=\E[%p1%dL, il1=\E[L, + is2=\E[?7h\E[?1l\E[?3l\E7\E8, kbs=^H, kcub1=\EOD, + kcud1=\EOB, kcuf1=\EOC, kcuu1=\EOA, kf0=\EOY, kf1=\EOP, + kf2=\EOQ, kf3=\EOR, kf4=\EOS, kf5=\EOT, kf6=\EOU, kf7=\EOV, + kf8=\EOW, kf9=\EOX, rc=\E8, rev=\E[7m, ri=\EM, + rmkx=\E[?1l\E>, rmso=\E[m, rmul=\E[m, sc=\E7, sgr0=\E[m, + smkx=\E[?1h\E=, smso=\E[7m, smul=\E[4m, +# +# (news-29: this had :TY=ascii: --esr) +news-29, + lines#29, use=news-unk, +# (news-29-euc: this had :TY=euc: --esr) +news-29-euc, + use=news-29, +# (news-29-sjis: this had :TY=sjis: --esr) +news-29-sjis, + use=news-29, +# +# (news-33: this had :TY=ascii: --esr) +news-33, + lines#33, use=news-unk, +# (news-33-euc: this had :TY=euc: --esr) +news-33-euc, + use=news-33, +# (news-33-sjis: this had :TY=sjis: --esr) +news-33-sjis, + use=news-33, +# +# (news-42: this had :TY=ascii: --esr) +news-42, + lines#42, use=news-unk, +# (news-42-euc: this had :TY=euc: --esr) +news-42-euc, + use=news-42, +# (news-42-sjis: this had :TY=sjis: --esr) +news-42-sjis, + use=news-42, +# +# NEWS-OS old termcap entry +# +# (news-old-unk: this had :KB=news:TY=sjis: --esr) +news-old-unk|SONY NEWS vt100 emulator common entry, + am, xenl, + cols#80, vt#3, + bel=^G, blink=\E[5m, bold=\E[1m, clear=\E[;H\E[2J, cr=^M, + csr=\E[%i%p1%d;%p2%dr, cub1=^H, cud1=^J, cuf1=\E[C, + cup=\E[%i%p1%d;%p2%dH, cuu1=\E[A, ed=\E[J, el=\E[K, + home=\E[H, ht=^I, if=/usr/lib/tabset/vt100, kbs=^H, + kcub1=\EOD, kcud1=\EOB, kcuf1=\EOC, kcuu1=\EOA, kf1=\EOP, + kf2=\EOQ, kf3=\EOR, kf4=\EOS, rc=\E8, rev=\E[7m, ri=\EM, + rmkx=\E[?1l\E>, rmso=\E[m, rmul=\E[m, sc=\E7, sgr0=\E[m, + smkx=\E[?1h\E=, smso=\E[7m, smul=\E[4m, +# +# (nwp512: this had :DE=^H:, which I think means <OTbs> --esr) +nwp512|news|nwp514|news40|vt100-bm|sony vt100 emulator 40 lines, + lines#40, + is2=\E7\E[r\E8\EE\EE\EE\EM\EM\EM\E[?7h\E[?1l\E[?3l\E7\E[1;40r\E8, use=news-old-unk, +# +# (nwp512-a: this had :TY=ascii: and the alias vt100-bm --esr) +nwp512-a|nwp514-a|news-a|news42|news40-a|sony vt100 emulator 42 line, + lines#42, + is2=\E[?7h\E[?1l\E[?3l\E7\E[1;42r\E8, use=news-old-unk, +# +# (nwp-512-o: this had :KB=nwp410:DE=^H: I interpret the latter as <OTbs>. --esr) +nwp512-o|nwp514-o|news-o|news40-o|vt100-bm-o|sony vt100 emulator 40 lines, + lines#40, + is2=\E7\E[r\E8\EE\EE\EE\EM\EM\EM\E[?7h\E[?1l\E[?3l\E7\E[1;40r\E8, use=news-old-unk, +# +# (nwp513: this had :DE=^H: and the alias vt100-bm --esr) +nwp513|nwp518|nwe501|newscbm|news31|sony vt100 emulator 33 lines, + lines#31, + is2=\E7\E[r\E8\EE\EE\EE\EM\EM\EM\E[?7h\E[?1l\E[?3l\E7\E[1;31r\E8, use=news-old-unk, +# +# (nwp513-a: this had :TY=ascii: and :DE=^H:, which I interpret as <OTbs>; --esr) +# also the alias vt100-bm. +nwp513-a|nwp518-a|nwe501-a|nwp251-a|newscbm-a|news31-a|newscbm33|news33|sony vt100 emulator 33 lines, + lines#33, + is2=\E7\E[r\E8\EE\EE\EE\EM\EM\EM\E[?7h\E[?1l\E[?3l\E7\E[1;33r\E8, use=news-old-unk, +# +# (nwp513-o: had :DE=^H:, I think that's <OTbs>; also the alias vt100-bm --esr) +nwp513-o|nwp518-o|nwe501-o|nwp251-o|newscbm-o|news31-o|sony vt100 emulator 33 lines, + lines#31, + is2=\E7\E[r\E8\EE\EE\EE\EM\EM\EM\E[?7h\E[?1l\E[?3l\E7\E[1;31r\E8, use=news-old-unk, +# +# (news28: this had :DE=^H:, I think that's <OTbs>, and :KB=nws1200: --esr) +news28|sony vt100 emulator 28 lines, + lines#28, + is2=\E7\E[r\E8\EE\EE\EE\EM\EM\EM\E[?7h\E[?1l\E[?3l\E7\E[1;28r\E8, use=news-old-unk, +# +# (news29: this had :TY=ascii:KB=nws1200:\ --esr) +news29|news28-a|sony vt100 emulator 29 lines, + lines#29, + is2=\E7\E[r\E8\EE\EE\EE\EM\EM\EM\E[?7h\E[?1l\E[?3l\E7\E[1;29r\E8, use=news-old-unk, +# +# (news511: this had :TY=sjis: --esr) +nwp511|nwp-511|nwp-511 vt100, + am, xenl, + cols#80, lines#24, + clear=\E[;H\E[2J$<20/>, cuf1=\E[C, + cup=\E[%i%p1%d;%p2%dH, cuu1=\E[A$<2/>, dl1=\E[M, + ed=\E[J$<30/>, el=\E[K$<3/>, + flash=\E[?5h\0\0\0\0\0\0\0\0\0\0\0\0\0\E[?5l, + il1=\E[L, is2=\E[?5l\E[?1l\E>\E[?7h\E[?8h, kcub1=\E[D, + kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A, kf1=\EOP, kf2=\EOQ, + kf3=\EOR, kf4=\EOS, kf5=\EOT, kf6=\E#W, khome=\E[H, + ri=\EM$<5/>, rmso=\E[m$<2/>, rmul=\E[m$<2/>, + smso=\E[7m$<2/>, smul=\E[4m$<2/>, +# (news517: this had :TY=sjis:. --esr) +nwp517|nwp-517|nwp-517 vt200 80 cols 30 rows, + eslok, hs, + cols#80, lines#30, + dsl=\E[1$~, fsl=\E[0$}, + is2=\E7\E[r\E8\E>\E[?3l\E[?4l\E[?5l\E[?7h\E[?8h, + tsl=\E[1$}\E[;%df, + use=vt200, +# (news517-w: this had :TY=sjis:. --esr) +nwp517-w|nwp-517-w|nwp-517 vt200 132 cols 50 rows, + eslok, hs, + cols#132, lines#50, + dsl=\E[1$~, fsl=\E[0$}, + is2=\E7\E[r\E8\E>\E[?3h\E[?4l\E[?5l\E[?7h\E[?8h, + tsl=\E[1$}\E[;%df, + use=vt200, + +#### Common Desktop Environment +# + +# This ships with Sun's CDE in Solaris 2.5 +# Corrected Sun Aug 9 1998 by Alexander V. Lukyanov <lav@video.yars.free.net> +dtterm|CDE desktop terminal, + am, mir, msgr, xenl, xon, + colors#8, cols#80, it#8, lines#24, lm#0, pairs#64, + acsc=``aaffggjjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~, + bel=^G, blink=\E[5m, bold=\E[1m, civis=\E[?25l, + clear=\E[H\E[J, cnorm=\E[?25h, cr=^M, + csr=\E[%i%p1%d;%p2%dr, cub=\E[%p1%dD, cub1=^H, + cud=\E[%p1%dB, cud1=^J, cuf=\E[%p1%dC, cuf1=\E[C, + cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA, cuu1=\E[A, + dch=\E[%p1%dP, dch1=\E[P, dim=\E[2m, dl=\E[%p1%dM, + dl1=\E[M, ech=\E[%p1%dX, ed=\E[J, el=\E[K, el1=\E[1K, + enacs=\E(B\E)0, flash=\E[?5h$<200>\E[?5l, home=\E[H, + ht=^I, hts=\EH, ich=\E[%p1%d@, il=\E[%p1%dL, il1=\E[L, + ind=\ED, invis=\E[8m, is2=\E F\E>\E[?1l\E[?7h\E[?45l, + kbs=^H, kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A, + kdch1=\E[3~, kf1=\E[11~, kf10=\E[21~, kf11=\E[23~, + kf12=\E[24~, kf13=\E[25~, kf14=\E[26~, kf15=\E[28~, + kf16=\E[29~, kf17=\E[31~, kf18=\E[32~, kf19=\E[33~, + kf2=\E[12~, kf20=\E[34~, kf3=\E[13~, kf4=\E[14~, + kf5=\E[15~, kf6=\E[17~, kf7=\E[18~, kf8=\E[19~, kf9=\E[20~, + kfnd=\E[1~, khlp=\E[28~, kich1=\E[2~, knp=\E[6~, kpp=\E[5~, + kslt=\E[4~, nel=\EE, op=\E[39;49m, rc=\E8, rev=\E[7m, ri=\EM, + rmacs=^O, rmam=\E[?7l, rmir=\E[4l, rmso=\E[22;27m, + rmul=\E[24m, sc=\E7, setab=\E[%p1%{40}%+%dm, + setaf=\E[%p1%{30}%+%dm, + sgr=\E[0%?%p1%t;2;7%;%?%p2%t;4%;%?%p3%t;7%;%?%p4%t;5%;%?%p5%t;2%;%?%p6%t;1%;%?%p7%t;8%;m%?%p9%t\016%e\017%;, + sgr0=\E[m\017, smacs=^N, smam=\E[?7h, smir=\E[4h, + smso=\E[2;7m, smul=\E[4m, tbc=\E[3g, + +#### Non-Unix Consoles +# + +# Except for the "-emx" suffixes, these are as distributed with EMX 0.9b, +# a Unix-style environment used on OS/2. (Note that the suffix makes some +# names longer than 14 characters, the nominal maximum). +# +# Removed: rmacs=\E[10m, smacs=\E[11m, because OS/2 does not implement acs. +ansi-emx|ANSI.SYS color, + am, bce, eo, mir, msgr, xenl, xon, + colors#16, cols#80, it#8, lines#25, pairs#64, + bel=^G, blink=\E[5m, bold=\E[1m, civis=\E[?25l, + clear=\E[1;33;44m\E[H\E[J, cnorm=\E[?25h, cr=^M, cub1=^H, + cud1=^J, cuf1=\E[C, cup=\E[%i%p1%d;%p2%dH, cuu1=\E[A, + dch=\E[%p1%dp, ed=\E[J, el=\E[K, flash=\E[?5h\E[?5l, + home=\E[H, ht=^I, hts=\EH, ich=\E[%p1%d@, ich1=\E[@, ind=^J, + kb2=\E[G, kbs=^H, kcub1=\0K, kcud1=\0P, kcuf1=\0M, kcuu1=\0H, + kf0=\0D, kf1=\0;, kf2=\0<, kf3=\0=, kf4=\0>, kf5=\0?, kf6=\0@, + kf7=\0A, kf8=\0B, kf9=\0C, khome=\0G, kich1=\0R, kll=\0O, + knp=\0Q, kpp=\0I, kspd=^Z, nel=^M^J, rev=\E[5;37;41m, + rmir=\E[4l, rmpch=\E[10m, rmso=\E[0;44m\E[1;33m, + rmul=\E[0;44m\E[1;33m, rs1=\Ec, setab=\E[4%p1%dm, + setaf=\E[3%p1%dm, sgr0=\E[0m\E[1;33;44m, smir=\E[4h, + smpch=\E[11m, smso=\E[0;31;47m, smul=\E[1;31;44m, + tbc=\E[3g, u8=\E[?6c, u9=\E[c, +ansi-color-2-emx|ANSI.SYS color 2, + am, bce, eo, mir, msgr, xenl, xon, + colors#16, cols#80, it#8, lines#25, pairs#64, + bel=^G, blink=\E[5m, bold=\E[1m, civis=\E[?25l, + clear=\E[0;37;44m\E[H\E[J, cnorm=\E[?25h, cr=^M, cub1=^H, + cud1=^J, cuf1=\E[C, cup=\E[%i%p1%d;%p2%dH, cuu1=\E[A, + dch=\E[%p1%dp, ed=\E[J, el=\E[K, flash=\E[?5h\E[?5l, + home=\E[H, ht=^I, hts=\EH, ich=\E[%p1%d@, ich1=\E[@, ind=^J, + kb2=\E[G, kbs=^H, kcub1=\0K, kcud1=\0P, kcuf1=\0M, kcuu1=\0H, + kf0=\0D, kf1=\0;, kf2=\0<, kf3=\0=, kf4=\0>, kf5=\0?, kf6=\0@, + kf7=\0A, kf8=\0B, kf9=\0C, khome=\0G, kich1=\0R, kll=\0O, + knp=\0Q, kpp=\0I, kspd=^Z, nel=^M^J, rev=\E[1;37;46m, + rmir=\E[4l, rmpch=\E[10m, rmso=\E[0;37;44m, + rmul=\E[0;37;44m, rs1=\Ec, setab=\E[4%p1%dm, + setaf=\E[3%p1%dm, sgr0=\E[0;37;44m, smir=\E[4h, + smpch=\E[11m, smso=\E[1;37;46m, smul=\E[1;36;44m, + tbc=\E[3g, u8=\E[?6c, u9=\E[c, +ansi-color-3-emx|ANSI.SYS color 3, + am, bce, eo, mir, msgr, xenl, xon, + colors#16, cols#80, it#8, lines#25, pairs#64, + bel=^G, blink=\E[5m, bold=\E[1m, civis=\E[?25l, + clear=\E[0;37;40m\E[H\E[J, cnorm=\E[?25h, cr=^M, cub1=^H, + cud1=^J, cuf1=\E[C, cup=\E[%i%p1%d;%p2%dH, cuu1=\E[A, + dch=\E[%p1%dp, ed=\E[J, el=\E[K, flash=\E[?5h\E[?5l, + home=\E[H, ht=^I, hts=\EH, ich=\E[%p1%d@, ich1=\E[@, ind=^J, + kb2=\E[G, kbs=^H, kcub1=\0K, kcud1=\0P, kcuf1=\0M, kcuu1=\0H, + kf0=\0D, kf1=\0;, kf2=\0<, kf3=\0=, kf4=\0>, kf5=\0?, kf6=\0@, + kf7=\0A, kf8=\0B, kf9=\0C, khome=\0G, kich1=\0R, kll=\0O, + knp=\0Q, kpp=\0I, kspd=^Z, nel=^M^J, rev=\E[1;37;46m, + rmir=\E[4l, rmpch=\E[10m, rmso=\E[0;37;40m, + rmul=\E[0;37;40m, rs1=\Ec, setab=\E[4%p1%dm, + setaf=\E[3%p1%dm, sgr0=\E[0;10m, smir=\E[4h, + smpch=\E[11m, smso=\E[1;37;46m, smul=\E[0;36;40m, + tbc=\E[3g, u8=\E[?6c, u9=\E[c, +mono-emx|stupid monochrome ansi terminal with only one kind of emphasis, + am, + cols#80, it#8, lines#24, + clear=\E[H\E[2J$<50>, cub1=\E[D, cud1=\E[B, cuf1=\E[C, + cup=\E[%i%p1%d;%p2%dH, cuu1=\E[A, el=\E[K, home=\E[H, + ht=^I, kb2=\E[G, kbs=^H, kcub1=\0K, kcud1=\0P, kcuf1=\0M, + kcuu1=\0H, kf0=\0D, kf1=\0;, kf2=\0<, kf3=\0=, kf4=\0>, + kf5=\0?, kf6=\0@, kf7=\0A, kf8=\0B, kf9=\0C, khome=\0G, + kich1=\0R, kll=\0O, knp=\0Q, kpp=\0I, nel=^M^J, rev=\E[7m, + sgr0=\E[0m, + +# This entry fits the Windows NT console when the _POSIX_TERM environment +# variable is set to 'on'. While the Windows NT POSIX console is seldom used, +# the Telnet client supplied with both the Windows for WorkGroup 3.11 TCP/IP +# stack and the Win32 (i.e., Windows 95 and Windows NT 3.1 or later) operating +# systems is not, and (surprise!) they match very well. +# +# See: MS Knowledge Base item Q108581, dated 13-MAY-1997, titled "Setting Up +# VI POSIX Editor for Windows NT 3.1". True to Microsoft form, not only +# are the installation instructions a pile of mind-numbing bureaucratese, +# but the termcap entry is actually broken and unusable as given; the :do: +# capability is misspelled "d". +# +# To use this, you need to a bunch of environment variables: +# +# SET _POSIX_TERM=on +# SET TERM=ansi +# SET TERMCAP=location of termcap file in POSIX file format +# which is case-sensitive. +# e.g. SET TERMCAP=//D/RESKIT35/posix/termcap +# SET TMP=//C/TEMP +# +# Important note: setting the TMP environment variable in POSIX style renders +# it incompatible with a lot of other applications, including Visual C++. So +# you should have a separate command window just for vi. All the other +# variables may be permanently set in the Control Panel\System applet. +# +# You can find out more about the restrictions of this facility at +# <http://www.nentug.org/unix-to-nt/ntposix.htm>. +# +# From: Federico Bianchi <bianchi@magna.cisid.unipi.it>, 15 Jan 1997 +ansi-nt|psx_ansi|Microsoft Windows NT console POSIX ANSI mode, + am, bw, msgr, + cols#80, it#8, lines#25, + bel=^G, clear=\E[2J, cr=^M, cub1=^H, cud1=^J, cuf1=\E[C, + cup=\E[%i%p1%d;%p2%dH, cuu1=\E[A, ed=\E[J, el=\E[K, + home=\E[H, ht=^I, ind=\E[S, kbs=^H, kcub1=\E[D, kcud1=\E[V, + kcuf1=\E[C, kcuu1=\E[A, nel=\r\E[S, rc=\E[u, rev=\E[7m, + ri=\E[T, rmso=\E[m, sc=\E[s, sgr0=\E[0m, smso=\E[7m, + +######## COMMON TERMINAL TYPES +# +# This section describes terminal classes and maker brands that are still +# quite common, but have proprietary command sets not blessed by ANSI. +# + +#### Altos +# +# Altos made a moderately successful line of UNIX boxes. In 1990 they were +# bought out by Acer, a major Taiwanese manufacturer of PC-clones. +# Acer has a web site at http://www.acer.com. +# +# Altos descriptions from Ted Mittelstaedt <tedm@agora.rain.com> 4 Sep 1993 +# His comments suggest they were shipped with the system. +# + +# (altos2: had extension capabilities +# :c0=^A`\r:c1=^Aa\r:c2=^Ab\r:c3=^Ac\r:\ +# :c4=^Ad\r:c5=^Ae\r:c6=^Af\r:c7=^Ag\r:\ +# :c8=^Ah\r:c9=^Ai\r:cA=^Aj\r:cB=^Ak\r:\ +# :cC=^Al\r:cD=^Am\r:cE=^An\r:cF=^Ao\r: +# :XU=^Aq\r:XD=^Ar\r:XR=^As\r:XL=^At\r:\ +# :YU=^AQ\r:YD=^AR\r:YR=^AS\r:YL=^AT\r:\ +# :HL=^AP\r:SP=\E[i:\ +# :IS=\E[@:DE=\E[P:IL=\E[L:NS=\E[S:PS=\E[T:\ +# :LO=\E[0q:LC=\E[5q:LL=\E[6q:\ +# Comparison with the k* capabilities makes it obvious that the c* things are +# shift keys. I have renamed them to keys 32 and up accordingly. Also, +# :sr: was given as a boolean-- esr) +altos2|alt2|altos-2|altos II, + cols#80, it#8, lines#24, xmc#0, + clear=\E[H\E[2J, cr=^M, cub1=^H, cud1=\E[1B, cuf1=\E[1C, + cup=\E[%i%p1%d;%p2%dH, cuu1=\E[1A, dch1=\E[P, dl=\E[M, + ed=\E[J, el=\E[K, home=\E[H, ht=^I, ich1=\E[@, + if=/usr/share/tabset/vt100, il1=\E[L, ind=^J, + is2=\E>\E[?3l\E[?4l\E[?5l\E[?7h\E[?8h, kDL=^Am\r, + kEOL=^An\r, kbs=^H, kcbt=^AK\r, kclr=^AL\r, kcub1=\E[D, + kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A, kdch1=^AM\r, kel=^AN\r, + kf0=^AI\r, kf1=^A@\r, kf2=^AA\r, kf3=^AB\r, kf32=^A`\r, + kf33=^Aa\r, kf34=^Ab\r, kf35=^Ac\r, kf36=^Ad\r, kf37=^Ae\r, + kf38=^Af\r, kf39=^Ag\r, kf4=^AC\r, kf40=^Ah\r, kf41=^Ai\r, + kf42=^Aj\r, kf43=^Ak\r, kf5=^AD\r, kf6=^AE\r, kf7=^AF\r, + kf8=^AG\r, kf9=^AH\r, khome=\E[f, kil1=^AJ\r, kind=^AO\r, + nel=^M^J, rmam=\E[?7l, rmso=\E[m, rmul=\E[m, sgr0=\E[m, + smam=\E[?7h, smso=\E[7m, smul=\E[4m, +# (altos3: had extension capabilities +# :c0=^A`\r:c1=^Aa\r:c2=^Ab\r:c3=^Ac\r:\ +# :c4=^Ad\r:c5=^Ae\r:c6=^Af\r:c7=^Ag\r:\ +# :c8=^Ah\r:c9=^Ai\r:cA=^Aj\r:cB=^Ak\r:\ +# :cC=^Al\r:cD=^Am\r:cE=^An\r:cF=^Ao\r: +# :XU=^Aq\r:XD=^Ar\r:XR=^As\r:XL=^At\r:\ +# :HL=^AP\r:SP=\E[i:\ +# :IS=\E[@:DE=\E[P:IL=\E[L:NS=\E[S:PS=\E[T:\ +altos3|altos5|alt3|alt5|altos-3|altos-5|altos III or V, + blink=\E[5p, ri=\EM, sgr0=\E[p, + use=altos2, +altos4|alt4|altos-4|altos IV, + use=wy50, +# (altos7: had extension capabilities: +# :GG#0:GI=\EH8:GF=\EH7:\ +# :c0=^A`\r:c1=^Aa\r:c2=^Ab\r:c3=^Ac\r:\ +# :c4=^Ad\r:c5=^Ae\r:c6=^Af\r:c7=^Ag\r:\ +# :c8=^Ah\r:c9=^Ai\r:cA=^Aj\r:cB=^Ak\r:\ +# :cC=^Al\r:cD=^Am\r:cE=^An\r:cF=^Ao\r: +# Comparison with the k* capabilities makes it obvious that the c* things are +# shift keys. I have renamed them to keys 32 and up accordingly. I have +# also made this entry relative to adm12 in order to give it an <sgr>. The +# <invis> imported by use=adm+sgr may work, let me know. -- esr) +altos7|alt7|altos VII, + am, mir, + cols#80, lines#24, xmc#0, + acsc=j5k3l2m1n8q\:t4u9v=w0x6, blink=\EG2, bold=\EGt, + clear=\E+^^, cr=^M, cub1=^H, cud1=^J, cuf1=^L, + cup=\E=%p1%{32}%+%c%p2%{32}%+%c, cuu1=^K, dch1=\EW, + dim=\EGp, dl=\ER, ed=\EY, el=\ET, home=^^, ht=^I, il1=\EE, + ind=^J, invis=\EG1, + is2=\E`\:\Ee(\EO\Ee6\Ec41\E~4\Ec21\Eu\E~2, kDL=^Am\r, + kEOL=^An\r, kbs=^H, kcbt=^AK\r, kclr=^AL\r, kcub1=^H, + kcud1=^J, kcuf1=^L, kcuu1=^K, kdch1=^AM\r, kel=^AN\r, + kf0=^AI\r, kf1=^A@\r, kf2=^AA\r, kf3=^AB\r, kf32=^A`\r, + kf33=^Aa\r, kf34=^Ab\r, kf35=^Ac\r, kf36=^Ad\r, kf37=^Ae\r, + kf38=^Af\r, kf39=^Ag\r, kf4=^AC\r, kf40=^Ah\r, kf41=^Ai\r, + kf42=^Aj\r, kf43=^Ak\r, kf5=^AD\r, kf6=^AE\r, kf7=^AF\r, + kf8=^AG\r, kf9=^AH\r, khome=^^, kil1=^AJ\r, kind=^AO\r, + knp=\EK, kpp=\EJ, mc4=\EJ, mc5=\Ed#, nel=^M^J, ri=\Ej, + rmir=\Er, smir=\Eq, + use=adm+sgr, +altos7pc|alt7pc|altos PC VII, + kend=\ET, use=altos7, + +#### Hewlett-Packard (hp) +# +# Hewlett-Packard +# 8000 Foothills Blvd +# Roseville, CA 95747 +# Vox: 1-(916)-785-4363 (Technical response line for VDTs) +# 1-(800)-633-3600 (General customer support) +# + +# Generic HP terminal - this should (hopefully) work on any HP terminal. +hpgeneric|hp|hewlett-packard generic terminal, + am, da, db, mir, xhp, + cols#80, lines#24, lm#0, vt#6, + bel=^G, clear=\EH\EJ, cr=^M, cub1=^H, cud1=^J, cuf1=\EC, + cup=\E&a%p2%dc%p1%dY$<6>, cuu1=\EA, dch1=\EP, dl1=\EM, + ed=\EJ, el=\EK, hpa=\E&a%p1%dC, ht=^I, hts=\E1, il1=\EL, + ind=^J, kbs=^H, kcbt=\Ei, rmir=\ER, rmso=\E&d@, rmul=\E&d@, + sgr0=\E&d@, smir=\EQ, smso=\E&dJ, smul=\E&dD, tbc=\E3, + vpa=\E&a%p1%dY, + +hp110|hewlett-packard model 110 portable, + lines#16, use=hpgeneric, + +hp+pfk+cr|hp function keys with CR, + kf1=\Ep\r, kf2=\Eq\r, kf3=\Er\r, kf4=\Es\r, kf5=\Et\r, + kf6=\Eu\r, kf7=\Ev\r, kf8=\Ew\r, + +hp+pfk-cr|hp function keys w/o CR, + kf1=\Ep, kf2=\Eq, kf3=\Er, kf4=\Es, kf5=\Et, kf6=\Eu, kf7=\Ev, + kf8=\Ew, + +# The hp2621s use the same keys for the arrows and function keys, +# but not separate escape sequences. These definitions allow the +# user to use those keys as arrow keys rather than as function +# keys. +hp+pfk+arrows|hp alternate arrow definitions, + kcub1=\Eu\r, kcud1=\Ew\r, kcuf1=\Ev\r, kcuu1=\Et\r, kf1@, + kf2@, kf3@, kf4@, kf5@, kf6@, kf7@, kf8@, khome=\Ep\r, kind=\Er\r, + kll=\Eq\r, kri=\Es\r, + +hp+arrows|hp arrow definitions, + kcub1=\ED, kcud1=\EB, kcuf1=\EC, kcuu1=\EA, khome=\Eh, + kind=\ES, kll=\EF, kri=\ET, + +# Generic stuff from the HP 262x series +# +hp262x|HP 262x terminals, + xhp, + blink=\E&dA, dch1=\EP$<2>, ed=\EJ, ht=\011$<2>, ind=\ES, + invis=\E&dS, ip=$<2>, kcub1=\ED, kcud1=\EB, kcuf1=\EC, + kcuu1=\EA, kdch1=\EP, kdl1=\EM, ked=\EJ, kel=\EK, khome=\Eh, + kich1=\EQ, kil1=\EL, kind=\ES, knp=\EU, kpp=\EV, kri=\ET, + krmir=\ER, rev=\E&dB, rmkx=\E&s0A, rmso=\E&d@, rmul=\E&d@, + sgr=\E&d%{64}%?%p1%t%{66}%|%;%?%p2%t%{68}%|%;%?%p3%t%{66}%|%;%?%p4%t%{65}%|%;%c, + sgr0=\E&d@, smkx=\E&s1A, smso=\E&dB, smul=\E&dD, + +# Note: no <home> on HPs since that homes to top of memory, not screen. +# Due to severe 2621 braindamage, the only way to get the arrow keys to +# transmit anything at all is to turn on the function key labels +# with <smkx>, and even then the user has to hold down shift! +# The default 2621 turns off the labels except when it has to to +# enable the function keys. If your installation prefers labels +# on all the time, or off all the time (at the "expense" of the +# function keys), use 2621-nl or 2621-wl. +# +# Note: there are newer ROMs for 2621's that allow you to set +# strap A so the regular arrow keys xmit \EA, etc, as with the +# 2645. However, even with this strap set, the terminal stops +# xmitting if you reset it, until you unset and reset the strap! +# Since there is no way to set/unset the strap with an escape +# sequence, we don't use it in the default. +# If you like, you can use 2621-ba (brain-damaged arrow keys). +hp2621-ba|2621 w/new rom and strap A set, + rmkx@, smkx@, use=hp+arrows, + use=hp2621, + +# hp2621 with function labels. Most of the time they are off, +# but inside vi, the function key labels appear. You have to +# hold down shift to get them to xmit. +hp2621|hp2621a|hp2621A|2621|2621a|2621A|hp2621-wl|2621-wl|hp 2621 w/labels, + is2=\E&jA\r, rmkx=\E&jA, + use=hp2621-fl, +hp2621-fl|hp 2621, + xhp@, xon, + pb#19200, + cbt=\Ei, cup=\E&a%p2%dc%p1%dY, dch1=\EP$<2>, ht=\011$<2>, + ip=$<2>, is2=\E&j@\r, rmkx=\E&j@, rmso=\E&d@, rmul=\E&d@, + sgr0=\E&d@, smkx=\E&jB, smso=\E&dD, smul=\E&dD, + use=hp+pfk+cr, use=hpgeneric, + +# To use hp2621p printer, setenv TERM=2621p, PRINTER=2612p +hp2621p|hp 2621 with printer, + mc4=\E&p13C, mc5=\E&p11C, use=hp2621, + +hp2621p-a|hp2621p with fn as arrows, + use=hp+pfk+arrows, use=hp2621p, + +# hp2621 with k45 keyboard +hp2621-k45|hp2621k45|k45|hp 2621 with 45 keyboard, + kbs=^H, kcub1=\ED, kcud1=\EB, kcuf1=\EC, kcuu1=\EA, + khome=\Eh, rmkx=\E&s0A, smkx=\E&s1A, + use=hp2621, + +# 2621 using all 48 lines of memory, only 24 visible at any time. +hp2621-48|48 line 2621, + lines#48, + cup=\E&a%p2%dc%p1%dR, home=\EH, vpa=\E&a%p1%dR, use=hp2621, + +# 2621 with no labels ever. Also prevents vi delays on escape. +hp2621-nl|hp 2621 with no labels, + kcub1@, kcud1@, kcuf1@, kcuu1@, khome@, rmkx@, smkx@, use=hp2621-fl, + +# Needed for UCB ARPAVAX console, since lsi-11 expands tabs +# (wrong). +# +hp2621-nt|hp 2621 w/no tabs, + ht@, use=hp2621, + +# Hp 2624 B with 4 or 10 pages of memory. +# +# Some assumptions are made with this entry. These settings are +# NOT set up by the initialization strings. +# +# Port Configuration +# RecvPace=Xon/Xoff +# XmitPace=Xon/Xoff +# StripNulDel=Yes +# +# Terminal Configuration +# InhHndShk=Yes +# InhDC2=Yes +# XmitFnctn(A)=No +# InhEolWrp=No +# +# Note: the 2624 DOES have a true <home>, believe it or not! +# +# The 2624 has an "error line" to which messages can be sent. +# This is CLOSE to what is expected for a "status line". However, +# after a message is sent to the "error line", the next carriage +# return is EATEN and the "error line" is turned back off again! +# So I guess we can't define <hs>, <eslok>, <wsl>, <dsl>, <fsl>, <tsl>. +# +# This entry supports emacs (and any other program that uses raw +# mode) at 4800 baud and less. I couldn't get the padding right +# for 9600. +# +# (hp2624: replaced NUL sequences in flash with mandatory pauses -- esr) +hp2624|hp2624a|hp2624b|hp2624b-4p|Hewlett Packard 2624 B, + da, db, + lm#96, + flash=\E&w13F$<66/>\E&w12F$<66/>\E&w13F$<66/>\E&w12F, use=hp+labels, use=scrhp, + +# This hp2626 entry does not use any of the fancy windowing stuff +# of the 2626. +# +# Indeed, terminfo does not yet handle such stuff. Since changing +# any window clears memory, it is probably not possible to use +# this for screen opt. +# +# ed is incredibly slow most of the time - I am guessing at the +# exact padding. Since the terminal uses xoff/xon this is intended +# only for cost computation, so that the terminal will prefer el +# or even dl1 which is probably faster! +# +# \ED\EJ\EC hack for ed from Ed Bradford - apparently ed is only +# extra slow on the last line of the window. +# +# The padding probably should be changed. +# +hp2626|hp2626a|hp2626p|hp 2626, + da, db, + lm#0, pb#19200, + ed=\ED\EJ$<500>\EC, indn=\E&r%p1%dD, ip=$<4>, + is2=\E&j@\r, rin=\E&r%p1%dU, + use=hp+pfk+cr, use=hp+labels, use=scrhp, + +# This entry is for sysline. It allocates a 23 line window with +# a 115 line workspace for regular use, and a 1 line window for +# the status line. +# +# This assumes port 2 is being used. +# Turn off horizontal line, Create ws #1 with 115 lines, +# Create ws #2 with 1 line, Create window #1 lines 1-23, +# Create window #2 lines 24-24, Attach cursor to workspace #1. +# Note that this clears the tabs so it must be done by tset before +# it sets the tabs. +# +hp2626-s|hp 2626 using only 23 lines, + eslok, hs, + lines#23, + fsl=\E&d@\E&w7f2p1I\E&w4f1I, + is1=\E&q3t0{0H \E&w0f115n1I \E&w0f1n2I \E&w2f1i0d0u22l0S \E&w2f2i0d23u23l0S \E&w7f2p1I \r, + tsl=\E&w7f2p2I\E&w4f2I\r\EK\E&a%p1%dC, + use=hp2626, +# Force terminal back to 24 lines after being 23. +hp2626-ns|hp 2626 using all 24 lines, + is1=\E&q3t0{0H \E&w0f118n1I \E&w0f1n2I \E&w2f1i0d0u23l0S \E&w3f2I \E&w7f2p1I \r, use=hp2626, +# Various entries useful for small windows on 2626. +hp2626-12|hewlett-packard 2626 12 lines, + lines#12, use=hp2626, +hp2626-12x40|hewlett-packard 2626 12 lines 40 columns, + cols#40, lines#12, use=hp2626, +hp2626-x40|hewlett-packard 2626 40 columns, + cols#40, use=hp2626, +hp2626-12-s|hewlett-packard 2626 11 lines plus status, + lines#11, use=hp2626-s, + +# +# hp2627 color tubes from University of Wisconsin +# +hp2627a-rev|hp 2627 with reverse video colors, + cr=^M, cud1=^J, ht=^I, ind=^J, + is2=\E&v0m1a0b0c1x1y1z1i0a0b1c1x1y1z0i0S\E&j@\r\E3\r, + kbs=^H, kcub1=^H, kcud1=^J, nel=^M^J, rmul=\E&v0S\E&d@, + smul=\E&dD\E&v1S, + use=hp2621-nl, +hp2627a|hp 2627 color terminal with no labels, + cr=^M, cud1=^J, ht=^I, ind=^J, + is2=\E&v0m1a1b0c1i0a1b1c2i1a0b0c0i0S\E&j@\r\E3\r, + kbs=^H, kcub1=^H, kcud1=^J, nel=^M^J, rmso=\E&v0S, + rmul=\E&v0S\E&d@, smso=\E&v2S, smul=\E&dD\E&v1S, + use=hp2621-nl, +hp2627c|hp 2627 color (cyan) terminal with no labels, + cr=^M, cud1=^J, ht=^I, ind=^J, + is2=\E&v0m1a0b0c2i1a1b0c1i0a1b1c0i0S\E&j@\r\E3\r, + kbs=^H, kcub1=^H, kcud1=^J, nel=^M^J, + use=hp2627a, + +# hp2640a doesn't have the Y cursor addressing feature, and C is +# memory relative instead of screen relative, as we need. +# +hp2640a|hp 2640a, + cup@, rmkx@, smkx@, use=hp2645, + +hp2640b|hp2644a|hp 264x series, + rmkx@, smkx@, use=hp2645, + +# (hp2641a: removed unknown :gu: -- esr) +hp2641a|hp2645a|hp2647a|HP 264?A series BRL entry, + am, da, db, mir, xhp, + cols#80, lines#24, + bel=^G, clear=\EH\EJ, cr=^M, cub1=^H, cud1=^J, cuf1=\EC, + cup=\E&a%p2%2dc%p1%2dY, cuu1=\EA, dch1=\EP, dl1=\EM, + ed=\EJ, el=\EK, hpa=\E&a%p1%2dC, ht=^I, + if=/usr/share/tabset/std, il1=\EL, ind=^J, + is2=\EE$<500/>, kbs=^H, kcub1=^H, kcud1=^J, nel=^M^J, + rmir=\ER, rmso=\E&d@, smir=\EQ, smso=\E&dB, + vpa=\E&a%p1%2dY, + +# This terminal should be used at 4800 baud or less. It needs padding for +# plain characters at 9600, I guessed at an appropriate cr delay. It really +# wants ^E/^F handshaking, but that doesn't work well even if you write +# software to support it. +hp2645|hp45|HP 2645 series, + pb#9600, + blink=\E&dA, cr=\r$<20>, dim=\E&dH, kctab=\E2, kcub1=\ED, + kcud1=\EB, kcuf1=\EC, kcuu1=\EA, kdch1=\EP, kdl1=\EM, + ked=\EJ, kel=\EK, khome=\Eh, khts=\E1, kich1=\EQ, kil1=\EL, + kind=\ES, knp=\EU, kpp=\EV, kri=\ET, krmir=\ER, rev=\E&dB, + rmkx=\E&s0A, + sgr=\E&d%{64}%?%p1%t%{66}%|%;%?%p2%t%{68}%|%;%?%p3%t%{66}%|%;%?%p4%t%{65}%|%;%?%p5%t%{72}%|%;%?%p6%t%{66}%|%;%c, + sgr0=\E&d@, smkx=\E&s1A, smul=\E&dD, + use=hpgeneric, +# You should use this terminal at 4800 baud or less. +hp2648|hp2648a|HP 2648a graphics terminal, + clear=\EH\EJ$<50>, cup=\E&a%p2%dc%p1%dY$<20>, + dch1=\EP$<7>, ip=$<5>, + use=hp2645, + +# The HP 150 terminal is a fairly vanilla HP terminal, with the +# clreol standout problem. It also has graphics capabilities and +# a touch screen, which we don't describe here. +hp150|hewlett packard Model 150, + use=hp2622, + +# HP 2382a terminals, "the little ones." They don't have any +# alternate character set support and sending out ^N/^O will +# leave the screen blank. +hp2382a|hp2382|hewlett packard 2382a, + da, db, + lh#1, lm#48, + acsc@, + pln=\E&f0a%p1%dk%p2%l%Pa%?%ga%t%ga%d%e1%;d0L%?%ga%!%t %;%p2%s, + rmacs@, + sgr=\E&d%{0}%Pa%?%p4%t%{1}%ga%+%Pa%;%?%p1%p3%|%p6%|%t%{2}%ga%+%Pa%;%?%p2%p6%|%t%{4}%ga%+%Pa%;%?%p1%p5%|%t%{8}%ga%+%Pa%;%?%p7%t%?%ga%ts%ga%{64}%+%e%{83}%;%e%?%ga%t%ga%{64}%+%e%{64}%;%;%c, + sgr0=\E&d@, smacs@, + use=hp+labels, use=scrhp, + +hp2621-a|hp2621a-a|hp2621 with fn as arrows, + use=hp+pfk+arrows, use=hp2621-fl, + +# newer hewlett packard terminals + +newhpkeyboard|generic entry for HP extended keyboard, + kbs=^H, kcbt=\Ei, kclr=\EJ, kcub1=\ED, kcud1=\EB, kcuf1=\EC, + kcuu1=\EA, kdch1=\EP, kdl1=\EM, ked=\EJ, kel=\EK, khome=\Eh, + kich1=\EQ, kil1=\EL, kind=\ET, kll=\EF, knp=\EU, kpp=\EV, + kri=\ES, krmir=\ER, rmkx=\E&s0A, smkx=\E&s1A, + use=hp+pfk-cr, + +newhp|generic entry for new hewlett packard terminals, + am, bw, mir, xhp, xon, + cols#80, lines#24, pb#4800, + acsc=2[3@4>5I9(\:'JSKWLQMAO#P$Q;R!S"T1U2V4W3X\:Y+Z*dHjGkTlRmFn/q\,t5u6v8w7x., + bel=^G, blink=\E&dA, bold=\E&dF, cbt=\Ei, cr=^M, cub1=^H, + cud1=^J, cuf1=\EC, cuu1=\EA, dch1=\EP$<2>, dim=\E&dH, + dl1=\EM, ed=\EJ, el=\EK, ht=\011$<2>, hts=\E1, il1=\EL, ind=^J, + invis=\E&dS, ip=$<2>, is1=\E&jB$<8>, nel=^M^J, + pfkey=\E&f0a%p1%dk0d%p2%l%dL%p2%s, + pfloc=\E&f1a%p1%dk0d%p2%l%dL%p2%s, + pfx=\E&f2a%p1%dk0d%p2%l%dL%p2%s, rev=\E&dB, ri=\ET, + rmacs=^O, rmir=\ER, rmso=\E&d@, rmul=\E&d@, rs1=\Eg, + sgr=\E&d%{0}%Pa%?%p4%t%{1}%ga%+%Pa%;%?%p1%p3%|%p6%|%t%{2}%ga%+%Pa%;%?%p2%p6%|%t%{4}%ga%+%Pa%;%?%p1%p5%|%t%{8}%ga%+%Pa%;%?%p7%t%?%ga%ts%ga%{64}%+%e%{83}%;%e%?%ga%t%ga%{64}%+%e%{64}%;%;%c%?%p9%t\016%e\017%;, + sgr0=\E&d@\017, smacs=^N, smir=\EQ, smso=\E&dJ, smul=\E&dD, + tbc=\E3, + use=newhpkeyboard, + +memhp|memory relative addressing for new HP ttys, + vt#6, + clear=\EH\EJ$<40>, cub=\E&a-%p1%dC, cud=\E&a+%p1%dR, + cuf=\E&a+%p1%dC, cup=\E&a%p1%dr%p2%dC, cuu=\E&a-%p1%dR, + home=\EH, hpa=\E&a%p1%dC, ll=\E&a23R\r, + mrcup=\E&a%p1%dr%p2%dC, vpa=\E&a%p1%dR, use=newhp, + +scrhp|screen relative addressing for new HP ttys, + clear=\E&a0c0Y\EJ$<40>, cub=\E&a-%p1%dC, + cud=\E&a+%p1%dR, cuf=\E&a+%p1%dC, + cup=\E&a%p1%dy%p2%dC$<10>, cuu=\E&a-%p1%dR, + home=\E&a0y0C, hpa=\E&a%p1%dC, ll=\E&a0y0C\EA, + mrcup=\E&a%p1%dr%p2%dC, vpa=\E&a%p1%dY, use=newhp, + +# (hp+labels: added label values from a BRL termcap -- esr) +hp+labels|"standard" label info for new HP ttys, + lh#2, lw#8, nlab#8, + lf0=f1, lf1=f2, lf2=f3, lf3=f4, lf4=f5, lf5=f6, lf6=f7, lf7=f8, + pln=\E&f2a%p1%dk%p2%l%Pa%?%ga%t%ga%d%e1%;d0L%?%ga%!%t %;%p2%s, + rmln=\E&j@, smln=\E&jB, + +hp+printer|"standard" printer info for HP ttys, + ff=\E&p4u0C, mc0=\EH\E&p4dF, mc4=\E&p13C, mc5=\E&p11C, + + +# The new hp2621b is kind of a cross between the old 2621 and the +# new 262x series of machines. It has dip-switched options. +# The firmware has a bug in it such that if you give it a null +# length label, the following character is eaten! +hp2621b|hp 2621b with old style keyboard, + lh#1, lm#48, lw#8, nlab#8, + kcub1=\ED, kcud1=\EB, kcuf1=\EC, kcuu1=\EA, khome=\Eh, + kind=\ET, kll=\EF, kri=\ES, + pln=\E&f0a%p1%dk%p2%l%Pa%?%ga%t%ga%d%e1%;d3L%?%ga%!%t%{32}%c%;%p2%s\E%{111}%p1%+%c\r, + smln=\E&jB, + use=hp2621, + +hp2621b-p|hp 2621b with printer, + use=hp+printer, use=hp2621b, + +# hp2621b - new 2621b with new extended keyboard +# these are closer to the new 26xx series than the other 2621b +hp2621b-kx|hp 2621b with extended keyboard, + use=newhpkeyboard, use=hp2621b, + +hp2621b-kx-p|hp 2621b with new keyboard & printer, + use=hp+printer, use=hp2621b-kx, + +# Some assumptions are made in the following entries. +# These settings are NOT set up by the initialization strings. +# +# Port Configuration +# RecvPace=Xon/Xoff XmitPace=Xon/Xoff StripNulDel=Yes +# +# Terminal Configuration +# InhHndShk(G)=Yes InhDC2(H)=Yes +# XmitFnctn(A)=No InhEolWrp=No +# +# +# Hp 2622a & hp2623a display and graphics terminals +# +hp2622|hp2622a|hp 2622, + da, db, + lm#0, pb#19200, + is2=\E&dj@\r, use=hp+pfk+cr, use=hp+labels, use=scrhp, + +# The 2623 is a 2622 with extra graphics hardware. +hp2623|hp2623a|hp 2623, + use=hp2622, + +hp2624b-p|hp2624b-4p-p|hewlett packard 2624 B with printer, + use=hp+printer, use=hp2624, + +# The hewlett packard B can have an optional extra 6 pages of memory. +hp2624-10p|hp2624a-10p|hp2624b-10p|hewlett packard 2624 B w/ 10 pages of memory, + lm#240, use=hp2624, + +hp2624b-10p-p|hewlett packard 2624 B w/ extra memory & printer, + lm#240, use=hp2624b-p, + +# Color manipulations for HP terminals +hp+color|hp with colors, + ccc, + colors#16, ncv#17, pairs#7, + initp=\E&v%?%p2%{1000}%=%t1%e.%p2%d%;a%?%p3%{1000}%=%t1%e.%p3%d%;b%?%p4%{1000}%=%t1%e.%p4%d%;c%?%p5%{1000}%=%t1%e.%p5%d%;x%?%p6%{1000}%=%t1%e.%p6%d%;y%?%p7%{1000}%=%t1%e.%p7%d%;z%p1%dI, + oc=\E&v0m1a1b1c0I\E&v1a1I\E&v1b2I\E&v1a1b3I\E&v1c4I\E&v1a1c5I\E&v1b1c6I\E&v1x1y7I, + op=\E&v0S, scp=\E&v%p1%dS, + +# <is2> sets the screen to be 80 columns wide +hp2397a|hp2397|hewlett packard 2397A color terminal, + is2=\E&w6f80X, + use=memhp, use=hp+labels, use=hp+color, + +# HP 700/44 Setup parameters: +# Terminal Mode HP-PCterm +# Inhibit Auto Wrap NO +# Status Line Host Writable +# PC Character Set YES +# Twenty-Five Line Mode YES +# XON/XOFF @128 or 64 (sc) +# Keycode Mode NO or YES (sc) +# Backspace Key BS or BS/DEL +# +# <is2> sets pcterm; autowrap; 25 lines; pc char set; prog DEL key; +# \E\\? does not turn off keycode mode +# <smsc> sets alternate start/stop; keycode on +hpansi|hp700|hewlett packard 700/44 in HP-PCterm mode, + am, eo, xenl, xon, + cols#80, lines#25, + acsc=j\331k\277l\332m\300n\305q\304t\303u\264v\301w\302x\263, + bel=^G, cbt=\E[Z, civis=\E[?25l, clear=\E[2J\E[H, + cnorm=\E[?25h, cr=^M, cub1=\E[D, cud1=\E[B, cuf1=\E[C, + cup=\E[%i%p1%d;%p2%dH, cuu1=\E[A, dch1=\E[P, dl1=\E[M, + ed=\E[J, el=\E[K, home=\E[H, ht=^I, ich1=\E[@, il1=\E[L, + ind=^J, + is2=\E[44"p\E[?7h\E[>10h\E[>12h\EP1;1|3/7F\E\\, + kbs=^H, kcbt=\E[Z, kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C, + kcuu1=\E[A, kend=\E[4~, kf1=\E[17~, kf10=\E[28~, + kf2=\E[18~, kf3=\E[19~, kf4=\E[20~, kf5=\E[21~, kf6=\E[23~, + kf7=\E[24~, kf8=\E[25~, kf9=\E[26~, khome=\E[1~, knp=\E[6~, + kpp=\E[5~, rmam=\E[?7l, + rmsc=\E[>11l\EP1**x0/11;1/13\E[m\E\\, rmso=\E[m, + rmul=\E[m, sgr0=\E[m, smam=\E[?7h, + smsc=\E[>11h\EPO**x0/65;1/67\E\\$<250>, smso=\E[7m, + smul=\E[4m, xoffc=g, xonc=e, +# +# (hp2392: copied <rmir> here from hpex -- esr) +hp2392|239x series, + cols#80, + cbt=\Ei, cup=\E&a%p1%dy%p2%dC, kf1=\Ep\r, kf2=\Eq\r, + kf3=\Er\r, kf4=\Es\r, kf5=\Et\r, kf6=\Eu\r, kf7=\Ev\r, + kf8=\Ew\r, khome=\Eh, kind=\EU, knp=\Eu, kpp=\Ev, kri=\EV, + rmir=\ER, rmul=\E&d@, smir=\EQ, smul=\E&dD, vpa=\E&a%p1%dY, + use=hpsub, + +hpsub|hp terminals -- capability subset, + am, da, db, mir, xhp, xon, + lines#24, + bel=^G, clear=\EH\EJ, cr=^M, cub1=^H, cud1=\EB, cuf1=\EC, + cuu1=\EA, dch1=\EP, dl1=\EM, ed=\EJ, el=\EK, hpa=\E&a%p1%dC, + ht=^I, if=/usr/share/tabset/stdcrt, il1=\EL, ind=^J, + is2=\E&s1A\E<\E&k0\\, kbs=^H, kcub1=\ED, kcud1=\EB, + kcuf1=\EC, kcuu1=\EA, khome=\Eh, rmkx=\E&s0A, rmso=\E&d@, + sgr0=\E&d@, smkx=\E&s1A, smso=\E&dB, + +# hpex: +# May be used for most 24 x 80 hp terminals, +# but has no padding added, so may allow runover in some terminals at high +# baud rates. Will not work for hp2640a or hp2640b terminals, hp98x6 and +# hp98x5 terminal emulators or hp98x6 consoles. +# Adds xy-cursor addressing, vertical cursor addressing, home, +# last line, and underline capabilities. +# +# (hpex: removed memory-lock capabilities ":ml=\El:mu=\Em:", +# moved <rmir> here from hpsub -- esr) +hpex|hp extended capabilites, + cr=^M, cud1=^J, cup=\E&a%p1%dy%p2%dC, ht=^I, ind=^J, kbs=^H, + kcub1=^H, kcud1=^J, nel=^M^J, rmir=\ER, rmul=\E&d@, smir=\EQ, + smul=\E&dD, vpa=\E&a%p1%dY, + use=hpsub, + +# From: Ville Sulko <Ville.Sulko@bip.atk.tpo.fi>, 05 Aug 1996 +hp2|hpex2|hewlett-packard extended capabilities newer version, + am, da, db, mir, xhp, + cols#80, lh#2, lines#24, lm#0, lw#8, nlab#8, xmc#0, + bel=^G, clear=\E&a0y0C\EJ, cr=^M, cub1=^H, cud1=\EB, + cuf1=\EC, cup=\E&a%p1%dy%p2%dC, cuu1=\EA, dch1=\EP, + dl1=\EM, ed=\EJ, el=\EK, hpa=\E&a%p1%dC, ht=^I, hts=\E1, + il1=\EL, ind=^J, kbs=^H, kclr=\EJ, kctab=\E2, kcub1=\ED, + kcud1=\EB, kcuf1=\EC, kcuu1=\EA, kdch1=\EP, kdl1=\EM, + ked=\EJ, kel=\EK, kf1=\Ep, kf2=\Eq, kf3=\Er, kf4=\Es, kf5=\Et, + kf6=\Eu, kf7=\Ev, kf8=\Ew, khome=\Eh, khts=\E1, kich1=\EQ, + kil1=\EL, kind=\ES, kll=\EF, knp=\EU, kpp=\EV, kri=\ET, + krmir=\ER, ktbc=\E3, meml=\El, memu=\Em, + pfkey=\E&f%p1%dk%p2%l%dL%p2%s, + pfloc=\E&f1a%p1%dk%p2%l%dL%p2%s, + pfx=\E&f2a%p1%dk%p2%l%dL%p2%s, + pln=\E&f%p1%dk%p2%l%dd0L%p2%s, rmir=\ER, rmkx=\E&s0A, + rmln=\E&j@, rmso=\E&d@, rmul=\E&d@, + sgr=\E&d%?%p7%t%{115}%c%;%p1%p3%|%p6%|%{2}%*%p2%{4}%*%+%p4%+%p5%{8}%*%+%{64}%+%c%?%p9%t%'\016'%c%e%'\017'%c%;, + sgr0=\E&d@, smir=\EQ, smkx=\E&s1A, smln=\E&jB, smso=\E&dB, + smul=\E&dD, tbc=\E3, vpa=\E&a%p1%dY, + +# HP 236 console +# From: <ddavis@ic.berkeley.edu> +hp236|hp236 internal terminal emulator, + am, + cols#80, lines#24, + clear=\EF, cnorm=\EDE, cub1=^H, + cup=\EE%p1%{32}%+%c%p2%{32}%+%c, cuu1=^K, cvvis=\EDB, + dch1=\EJ, dl1=\EH, el=\EK, ich1=\EI, il1=\EG, rmso=\ECI, + sgr0=\ECI, smso=\EBI, + +# This works on a hp300 console running Utah 4.3 BSD +# From: Craig Leres <leres@okeeffe.berkeley.edu> +hp300h|HP Catseye console, + am, da, db, mir, xhp, + cols#128, lines#51, lm#0, xmc#0, + bel=^G, cbt=\Ei, clear=\E&a0y0C\EJ, cr=^M, cub1=^H, cud1=\EB, + cuf1=\EC, cup=\E&a%p1%dy%p2%dC, cuu1=\EA, dch1=\EP, + dl1=\EM, ed=\EJ, el=\EK, hpa=\E&a%p1%dC, ht=^I, + if=/usr/share/tabset/stdcrt, il1=\EL, ind=^J, kbs=^H, + kcub1=\ED, kcud1=\EB, kcuf1=\EC, kcuu1=\EA, khome=\Eh, + rmir=\ER, rmkx=\E&s0A, rmso=\E&d@, rmul=\E&d@, sgr0=\E&d@, + smir=\EQ, smkx=\E&s1A, smso=\E&dB, smul=\E&dD, tbc=\E3, + vpa=\E&a%p1%dY, +# From: Greg Couch <gregc@ernie.berkeley.edu> +hp9837|hp98720|hp98721|HP 9000/300 workstations, + am, da, db, mir, xhp, + cols#128, it#8, lines#46, lm#0, + bel=^G, cbt=\Ei, clear=\E&a0y0C\EJ, cub1=^H, cud1=\EB, + cuf1=\EC, cup=\E&a%p1%dy%p2%dC, cuu1=\EA, dch1=\EP, + dl1=\EM, ed=\EJ, el=\EK, hpa=\E&a%p1%dC, ht=^I, hts=\E1, + il1=\EL, ind=^J, is2=\E&v0m1b0i&j@, kbs=^H, kcub1=\ED, + kcud1=\EB, kcuf1=\EC, kcuu1=\EA, kdch1=\EP, kdl1=\EM, + ked=\EJ, kel=\EK, khome=\Eh, kich1=\EQ, kil1=\EL, knp=\EU, + kpp=\EV, rmir=\ER, rmkx=\E&s0A, rmso=\E&v0S, rmul=\E&d@, + sgr0=\E&d@, smir=\EQ, smkx=\E&s1A, smso=\E&v5S, smul=\E&dD, + tbc=\E3, vpa=\E&a%p1%dY, +# HP 9845 desktop computer from BRL +# (hp9845: removed unknown capability :gu: -- esr) +hp9845|HP 9845, + am, da, db, eo, mir, xhp, + cols#80, lines#21, + clear=\EH\EJ, cuf1=\EC, cup=\E&a%p2%2dc%p1%2dY, cuu1=\EA, + dch1=\EP, dl1=\EM, ed=\EJ, el=\EK, + if=/usr/share/tabset/std, il1=\EL, rmir=\ER, rmso=\E&d@, + smir=\EQ, smso=\E&dB, +# From: Charles A. Finnell of MITRE <finnell@mitre.org>, developed 07SEP90 +# (hp98550: replaced /usr/share/tabset/9837 with std because <it#8>,<hts=\E1>; +# added empty <acsc> to avoid warnings re <smacs>/<rmacs> --esr) +hp98550|hp98550a|HP 9000 Series 300 color console, + am, da, db, mir, xhp, + cols#128, it#8, lines#49, lm#0, + acsc=, bel=^G, blink=\E&dA, bold=\E&dJ, cbt=\Ei, civis=\E*dR, + clear=\EH\EJ, cnorm=\E*dQ, cr=^M, cub1=^H, cud1=^J, cuf1=\EC, + cup=\E&a%p1%dy%p2%dC, cuu1=\EA, dch1=\EP, dim=\E&dH, + dl1=\EM, ed=\EJ, el=\EK, hpa=\E&a%p1%dC, ht=^I, hts=\E1, + if=/usr/share/tabset/std, il1=\EL, ind=^J, invis=\E&ds, + kbs=^H, kclr=\EJ, kctab=\E2, kcub1=\ED, kcud1=\EB, kcuf1=\EC, + kcuu1=\EA, kdch1=\EP, kdl1=\EM, ked=\EJ, kel=\EK, kf1=\Ep, + kf2=\Eq, kf3=\Er, kf4=\Es, kf5=\Et, kf6=\Eu, kf7=\Ev, kf8=\Ew, + khome=\Eh, khts=\E1, kich1=\EQ, kil1=\EL, kind=\ES, kll=\EF, + knp=\EU, kpp=\EV, kri=\ET, krmir=\ER, ktbc=\E3, rev=\E&dJ, + rmacs=^O, rmir=\ER, rmkx=\E&s0A, rmso=\E&d@, rmul=\E&d@, + sgr0=\E&d@, smacs=^N, smir=\EQ, smkx=\E&s1A, smso=\E&dJ, + smul=\E&dD, tbc=\E3, vpa=\E&a%p1%dY, +# From: Victor Duchovni <vic@fine.princeton.edu> +# (hp700-wy: removed obsolete ":nl=^J:"; +# replaced /usr/share/tabset/hp700-wy with std because <it#8>,<hts=\E1> -- esr) +hp700-wy|HP700/41 emulating wyse30, + am, bw, mir, msgr, + cols#80, it#8, lines#24, xmc#1, + cbt=\EI, clear=^Z, cr=^M, cub1=^H, cud1=^V, cuf1=^L, + cup=\E=%p1%{32}%+%c%p2%{32}%+%c, cuu1=^K, dch1=\EW, + dl1=\ER, ed=\EY, el=\ET$<10/>, home=^^, ht=^I, hts=\E1, + if=/usr/share/tabset/stdcrt, il1=\EE$<0.7*/>, + is1=\E~"\EC\Er\E(\EG0\003\E`9\E`1, kbs=\177, kcbt=\EI, + kclr=^Z, kcub1=^H, kcud1=^V, kcuf1=^L, kcuu1=^K, ked=\EY, + kel=\ET, khome=^^, khts=\EI, kich1=\Eq, krmir=\Er, ll=^^^K, + ri=\Ej, rmir=\Er, rmso=\EG0$<10/>, rmul=\EG0$<10/>, + sgr0=\EG0$<10/>, smir=\Eq, smso=\EG4$<10/>, + smul=\EG8$<10/>, tbc=\E0, vpa=\E[%p1%{32}%+%c, +# (hp70092: added empty <acsc> to avoid warnings re <smacs>/<rmacs> --esr) +hp70092|hp70092a|hp70092A|HP 700/92, + am, da, db, xhp, + cols#80, lh#2, lines#24, lm#0, lw#8, nlab#8, + acsc=, bel=^G, blink=\E&dA, bold=\E&dB, cbt=\Ei, + clear=\E&a0y0C\EJ, cr=^M, cub1=^H, cud1=\EB, cuf1=\EC, + cup=\E&a%p1%dy%p2%dC, cuu1=\EA, dch1=\EP, dim=\E&dH, + dl1=\EM, el=\EK, hpa=\E&a%p1%dC, ht=^I, hts=\E1, il1=\EL, + kbs=^H, kclr=\EJ, kctab=\E2, kcub1=\ED, kcud1=\EB, kcuf1=\EC, + kcuu1=\EA, kdch1=\EP, kdl1=\EM, ked=\EJ, kel=\EK, kf1=\Ep, + kf2=\Eq, kf3=\Er, kf4=\Es, kf5=\Et, kf6=\Eu, kf7=\Ev, kf8=\Ew, + khome=\Eh, khts=\E1, kich1=\EQ, kil1=\EL, kind=\ES, kll=\EF, + knp=\EU, kpp=\EV, kri=\ET, krmir=\ER, ktbc=\E3, rev=\E&dB, + ri=\ET, rmacs=^O, rmir=\ER, rmkx=\E&s0A, rmln=\E&j@, + rmso=\E&d@, rmul=\E&d@, sgr0=\E&d@, smacs=^N, smir=\EQ, + smkx=\E&s1A, smln=\E&jB, smso=\E&dJ, smul=\E&dD, tbc=\E3, + vpa=\E&a%p1%dY, + +bobcat|sbobcat|HP 9000 model 300 console, + am, da, db, mir, xhp, + cols#128, it#8, lines#47, xmc#0, + cbt=\Ei, clear=\EH\EJ, cr=^M, cub1=^H, cud1=\EB, cuf1=\EC, + cup=\E&a%dy%dC$<6/>, cuu1=\EA, dch1=\EP, dl1=\EM$<10*/>, + ed=\EJ, el=\EK, hpa=\E&a%dC$<6/>, ht=^I, il1=\EL$<10*/>, + ind=^J, kbs=^H, kcub1=\ED, kcud1=\EB, kcuf1=\EC, kcuu1=\EA, + khome=\Eh, nel=^M^J, rmir=\ER, rmkx=\E&s0A, rmso=\E&d@, + rmul=\E&d@, sgr0=\E&d@, smir=\EQ, smkx=\E&s1A, smso=\E&dB, + smul=\E&dD, vpa=\E&a%dY$<6/>, +gator-t|HP 9000 model 237 emulating extra-tall AAA, + lines#94, use=gator, +gator|HP 9000 model 237 emulating AAA, + bw, km, mir, ul, + cols#128, it#8, lines#47, + bel=^G, cbt=\E[Z, clear=\E[H\E[J, cr=^M, cub1=^H, cud1=^J, + cuf1=\E[C, cup=\E[%i%p1%d;%p2%dH, cuu1=\EM, + dch=\E[%p1%dP$<4/>, dch1=\E[P, dl=\E[%p1%dM$<1*/>, + dl1=\E[M, ed=\E[J, el=\E[K, home=\E[H, hpa=\E[%i%p1%d`, + ht=^I, ich=\E[%p1%d@$<4/>, ich1=\E[@, il=\E[%p1%dL$<1*/>, + il1=\E[L, kbs=^H, kcub1=^H, kcud1=^J, nel=^M^J, + rep=%p1%c\E[%p2%db$<1*/>, rev=\E[7m, rmso=\E[m, + rmul=\E[m, sgr0=\E[m, smso=\E[7m, smul=\E[4m, +gator-52|HP 9000 model 237 emulating VT52, + cols#128, lines#47, use=vt52, +gator-52t|HP 9000 model 237 emulating extra-tall VT52, + lines#94, use=gator-52, + +#### Honeywell-Bull +# +# From: Michael Haardt <michael@gandalf.moria> 11 Jan 93 +# + +# Honeywell Bull terminal. Its cursor and function keys send single +# control characters and it has standout/underline glitch. Most programs +# do not like these features/bugs. Visual bell is realized by flashing the +# "keyboard locked" LED. +dku7003-dumb|Honeywell Bull DKU 7003 dumb mode, + cols#80, lines#25, + clear=^]^_, cr=^M, cub1=^Y, cud1=^K, cuf1=^X, + cup=\E[%i%p1%d;%p2%dH, cuu1=^Z, ed=^_, el=\E[K, + flash=\E[2h\E[2l, home=^], ht=^I, ind=^J, kbs=^H, kcub1=^Y, + kcud1=^K, kcuf1=^X, kcuu1=^Z, khome=^], nel=^M^J, +dku7003|Honeywell Bull DKU 7003 all features described, + msgr, + xmc#1, + blink=\E[5m, bold=\E[7m, dim=\E[2m, rev=\E[7m, rmso=\E[m, + rmul=\E[m, sgr0=\E[m, smso=\E[7m, smul=\E[4m, + use=dku7003-dumb, + +#### Lear-Siegler (adm) +# +# These guys are long since out of the terminals business, but +# in 1995 many current terminals still have an adm type as one of their +# emulations (usually their stupidest, and usually labeled adm3, though +# these `adm3' emulations normally have adm3a+ capabilities). +# +# WARNING: Some early ADM terminals (including the ADM3 and ADM5) had a +# `diagnostic feature' that sending them a ^G while pin 22 (`Ring Indicator') +# was being held to ground would trigger a send of the top line on the screen. +# A quick fix might be to drop back to a cheesy 4-wire cable with pin 22 +# hanging in the air. (Thanks to Eric Fischer, <eric@fudge.uchicago.edu>, +# for clearing up this point.) + +adm1a|adm1|lsi adm1a, + am, + cols#80, lines#24, + bel=^G, clear=\E;$<1>, cr=^M, cub1=^H, cud1=^J, cuf1=^L, + cup=\E=%p1%{32}%+%c%p2%{32}%+%c, cuu1=^K, home=^^, + ind=^J, +adm2|lsi adm2, + am, + cols#80, lines#24, + bel=^G, clear=\E;, cr=^M, cub1=^H, cud1=^J, cuf1=^L, + cup=\E=%p1%{32}%+%c%p2%{32}%+%c, cuu1=^K, dch1=\EW, + dl1=\ER, ed=\EY, el=\ET, home=^^, ich1=\EQ, il1=\EE, ind=^J, + kcub1=^H, kcud1=^J, kcuf1=^L, kcuu1=^K, khome=^^, +# (adm3: removed obsolete ":ma=^K^P:" -- esr) +adm3|lsi adm3, + am, + cols#80, lines#24, + bel=^G, clear=^Z, cr=^M, cub1=^H, cud1=^J, ind=^J, +# The following ADM-3A switch settings are assumed for normal operation: +# SPACE U/L_DISP CLR_SCRN 24_LINE +# CUR_CTL LC_EN AUTO_NL FDX +# Other switches may be set for operator convenience or communication +# requirements. I recommend +# DISABLE_KB_LOCK LOCAL_OFF 103 202_OFF +# ETX_OFF EOT_OFF +# Most of these terminals required an option ROM to support lower case display. +# Open the case and look at the motherboard; if you see an open 24-pin DIP +# socket, you may be out of luck. +# +# (adm3a: some capabilities merged in from BRl entry -- esr) +adm3a|lsi adm3a, + am, + cols#80, lines#24, + bel=^G, clear=\032$<1/>, cr=^M, cub1=^H, cud1=^J, cuf1=^L, + cup=\E=%p1%{32}%+%c%p2%{32}%+%c, cuu1=^K, home=^^, + ind=^J, kcub1=^H, kcud1=^J, kcuf1=^L, kcuu1=^K, rs1=^N, +adm3a+|adm3a plus, + kbs=^H, use=adm3a, +# (adm5: removed obsolete ":ma=^Hh^Jj^Kk^Ll^^H:" & duplicate ":do=^J:" -- esr) +adm5|lsi adm5, + xmc#1, + bel=^G, cr=^M, cud1=^J, ed=\EY, el=\ET, kbs=^H, khome=^^, + rmso=\EG, smso=\EG, + use=adm3a+, +# A lot of terminals other than adm11s use these. Wherever you see +# use=adm+sgr with some of its capabilities disabled, try the +# disabled ones. They may well work but not have been documented or +# expressed in the using entry. We'd like to cook up an <sgr> but the +# <rmacs>/<smacs> sequences of the using entries vary too much. +adm+sgr|adm style highlight capabilities, + invis=\EG1, rev=\EG4, rmso=\EG0, rmul=\EG0, sgr0=\EG0, + smso=\EG4, smul=\EG8, +# LSI ADM-11 from George William Hartwig, Jr. <geo@BRL-TGR.ARPA> via BRL +# Status line additions from Stephen J. Muir <stephen%comp.lancs.ac.uk@ucl-cs> +# <khome> from <stephen%comp.lancs.ac.uk@ucl-cs.arpa>. <clear> could also +# be ^Z, according to his entry. +# (adm11: <smul>=\EG4 was obviously erroneous because it also said +# <rev>=\EG4. Looking at other ADMs confirms this -- esr) +adm11|LSI ADM-11, + am, hs, + cols#80, lines#24, + bel=^G, blink=\EG2, clear=\E*, cr=^M, cub1=^H, cud1=^J, + cuf1=^L, cup=\E=%p1%{32}%+%c%p2%{32}%+%c, cuu1=^K, + dsl=\Eh, ed=\EY, el=\ET, fsl=\E(\r, home=^^, ht=^I, kbs=^H, + kcub1=^H, kcud1=^J, kcuf1=^L, kcuu1=^K, kf1=^A@\r, kf2=^AA\r, + kf3=^AB\r, kf4=^AC\r, kf5=^AD\r, kf6=^AE\r, kf7=^AF\r, + kf8=^AG\r, khome=^^, nel=^M^J, tsl=\EF\E), + use=adm+sgr, +# From: Andrew Scott Beals <bandy@lll-crg.ARPA> +# Corrected by Olaf Siebert <rhialto@polder.ubc.kun.nl>, 11 May 1995 +# Supervisor mode info by Ari Wuolle, <awuolle@delta.hut.fi>, 27 Aug 1996 +# (adm12: removed obsolete ":kn:ma=j^Jk^P^K^Pl ^R^L^L :". This formerly had +# <is2>=\Eq but that looked wrong; this <is2> is from Dave Yost <esquire!yost> +# via BRL. That entry asserted <xmc#1>, but I've left that out because +# neither earlier nor later ADMSs have it -- esr) +# +# You will need to get into the supervisor setup before you can set +# baudrate etc. for your ADM-12+. Press Shift-Ctrl-Setup and you should +# see a lot more setup options. +# +# While in supervisor setup you can also use following codes: +# +# Ctrl-P Personality character selections (configure for example what +# arrow keys send, if I recall correctly) +# Ctrl-T tabs 1-80 use left&right to move and up to set and +# Ctrl-V tabs 81-158 down to clear tab. Shift-Ctrl-M sets right margin at cursor +# Ctrl-B Binary setup (probably not needed. I think that everything can +# be set using normal setup) +# Ctrl-A Answerback mode (enter answerback message) +# Ctrl-U User friendly mode (normal setup) +# Ctrl-D Defaults entire setup and function keys from EPROM tables +# Ctrl-S Save both setup and functions keys. Takes from 6 to 10 seconds. +# Ctrl-R Reads both setup and functions keys from NVM. +# Shift-Ctrl-X Unlock keyboard and cancel received X-OFF status +# +# ADM-12+ supports hardware handshaking, but it is DTR/CTS as opposed to +# RTS/CTS used nowadays with virtually every modem and computer. 19200 +# bps works fine with hardware flow control. +# +# The following null-modem cable should fix this and enable you to use +# RTS/CTS handshaking (which Linux supports, use CRTSCTS setting). Also +# set ADM-12+ for DTR handshaking from supervisor setup. +# +# PC Serial ADM-12+ +# -------- ------- +# 2 - 3 +# 3 - 2 +# 4 - 5 +# 5 - 20 +# 6,8 - 4 +# 7 - 7 +# 20 - 6,8 +# +adm12|lsi adm12, + am, mir, + cols#80, it#8, lines#24, + bel=^G, clear=^Z, cr=^M, cub1=^H, cud1=^J, cuf1=^L, + cup=\E=%p1%{32}%+%c%p2%{32}%+%c, cuu1=^K, dch1=\EW, + dl1=\ER, ed=\EY, el=\ET, home=^^, hts=\E1, ich1=\EQ, il1=\EE, + is2=\E0 \E1 \E1 \E1 \E1 \E1 \E1 \E1 \E1, + kcub1=^H, kcud1=^J, kcuf1=^L, kcuu1=^K, kf0=^A0\r, kf1=^A1\r, + kf2=^A2\r, kf3=^A3\r, kf4=^A4\r, kf5=^A5\r, kf6=^A6\r, + kf7=^A7\r, kf8=^A8\r, kf9=^A9\r, rmir=\Er, smir=\Eq, tbc=\E0, + use=adm+sgr, +# (adm20: removed obsolete ":kn#7:" -- esr) +adm20|lear siegler adm20, + am, + cols#80, it#8, lines#24, + bel=^G, cbt=\EI, clear=^Z, cr=^M, cub1=^H, cuf1=^L, + cup=\E=%i%p2%{31}%+%c%p1%{31}%+%c, cuu1=^K, dch1=\EW, + dl1=\ER, ed=\EY, el=\ET, home=^^, ht=^I, ich1=\EQ, il1=\EE, + kf1=^A, kf2=^B, kf3=^W, kf4=^D, kf5=^E, kf6=^X, kf7=^Z, rmso=\E(, + sgr0=\E(, smso=\E), +adm21|lear siegler adm21, + xmc#1, + bel=^G, cr=^M, cud1=^J, dch1=\EW, dl1=30*\ER, ed=\EY, el=\ET, + ich1=\EQ, il1=30*\EE, ind=^J, invis@, kbs=^H, kcub1=^H, + kcud1=^J, kcuf1=^L, kcuu1=^K, khome=^^, + use=adm+sgr, use=adm3a, +# (adm22: ":em=:" was an obvious typo for ":ei=:"; also, +# removed obsolete ":kn#7:ma=j^Jk^P^K^Pl ^R^L^L :"; +# removed bogus-looking \200 from before <cup>. -- esr) +adm22|lsi adm22, + am, + cols#80, lines#24, + bel=^G, cbt=\EI, clear=\E+, cr=^M, cub1=^H, cud1=^J, cuf1=^L, + cup=\E=%p1%{32}%+%c%p2%{32}%+%c, cuu1=^K, dch1=\EW, + dl1=\ER, ed=\Ey, el=\Et, home=^^, ht=\Ei, ich1=\EQ, il1=\EE, + is2=\E%\014\014\014\016\003\0\003\002\003\002\0\0\0\0\0\0\0\0\0\0\0, + kbs=^H, kcub1=^H, kcud1=^J, kcuf1=^L, kcuu1=^K, kf1=^A@\r, + kf2=^AA\r, kf3=^AB\r, kf4=^AC\r, kf5=^AD\r, kf6=^AE\r, + kf7=^AF\r, khome=^^, lf1=F1, lf2=F2, lf3=F3, lf4=F4, lf5=F5, + lf6=F6, lf7=F7, rmso=\E(, sgr0=\E(, smso=\E), +# ADM 31 DIP Switches +# +# This information comes from two versions of the manual for the +# Lear-Siegler ADM 31. +# +# Main board: +# rear of case +# +-||||-------------------------------------+ +# + S1S2 ||S + +# + ||3 + +# + + +# + ||S + +# + ||4 + +# + + +# + + +# + + +# + + +# + + +# +-+ +-+ +# + + +# + S5 S6 S7 + +# + == == == + +# +----------------------------------------------+ +# front of case (keyboard) +# +# S1 - Data Rate - Modem +# S2 - Data Rate - Printer +# ------------------------ +# Data Rate Setting +# ------------------- +# 50 0 0 0 0 +# 75 1 0 0 0 +# 110 0 1 0 0 +# 134.5 1 1 0 0 +# 150 0 0 1 0 +# 300 1 0 1 0 +# 600 0 1 1 0 +# 1200 1 1 1 0 +# 1800 0 0 0 1 +# 2000 1 0 0 1 +# 2400 0 1 0 1 +# 3600 1 1 0 1 +# 4800 0 0 1 1 +# 7200 1 0 1 1 +# 9600 0 1 1 1 +# x 1 1 1 1 +# +# S3 - Interface/Printer/Attributes +# --------------------------------- +# Printer Busy Control +# sw1 sw2 sw3 +# --------------- +# off off off Busy not active, CD disabled +# off off on Busy not active, CD enabled +# off on off Busy active on J5-20, CD disabled +# on off off Busy active on J5-19, CD disabled - Factory Set. +# on off on Busy active on J5-19, CD enabled +# +# sw4 Used in conjuction with S4 for comm interface control - Fact 0 +# +# sw5 Secondary Channel Control (Hardware implementation only) - Fact 0 +# +# sw6 ON enables printer BUSY active LOW - Factory Setting +# OFF enables printer BUSY active HIGH - If set to this, ADM31 senses +# +# sw7 ON - steady cursor - Factory Setting +# OFF - blinking cursor +# +# sw8 ON causes selected attribute character to be displayed +# OFF causes SPACE to be displayed instead - Factory Setting +# +# S4 - Interface +# -------------- +# Modem Interface +# S3 S4 S4 S4 S4 +# sw4 sw1 sw2 sw3 sw4 +# --------------------------- +# OFF ON OFF ON OFF Enable RS-232C interface, Direct Connect and +# Current Loop disabled - Factory Setting +# ON ON OFF ON OFF Enable Current Loop interface, Direct Connect +# disabled +# OFF OFF ON OFF ON Enable Direct Connect interface, RS-232C and +# Current Loop Disabled +# +# sw5 ON disables dot stretching mode - Factory Setting +# OFF enables dot stretching mode +# sw6 ON enables blanking function +# OFF enables underline function - Factory Setting +# sw7 ON causes NULLS to be displayed as NULLS +# OFF causes NULLS to be displayed as SPACES - Factory Setting +# +# S5 - Word Structure +# ------------------- +# sw1 ON enables BREAK key - Factory Setting +# OFF disables BREAK key +# sw2 ON selects 50Hz monitor refresh rate +# OFF selects 60Hz monitor refresh rate - Factory Setting +# +# Modem Port Selection +# sw3 sw4 sw5 +# --------------- +# ON ON ON Selects 7 DATA bits, even parity, 2 STOP bits +# OFF ON ON Selects 7 DATA bits, odd parity, 2 STOP bits +# ON OFF ON Selects 7 DATA bits, even parity, 1 STOP bit - Factory Set. +# OFF OFF ON Selects 7 DATA bits, odd parity, 1 STOP bit +# ON ON OFF Selects 8 DATA bits, no parity, 2 STOP bits +# OFF ON OFF Selects 8 DATA bits, no parity, 1 STOP bit +# ON OFF OFF Selects 8 DATA bits, even parity, 1 STOP bit +# OFF OFF OFF Selects 8 DATA bits, odd parity, 1 STOP bit +# +# sw6 ON sends bit 8 a 1 (mark) +# OFF sends bit 8 as 0 (space) - Factory Setting +# sw7 ON selects Block Mode +# OFF selects Conversation Mode - Factory Setting +# sw8 ON selects Full Duplex operation +# OFF selects Half Duplex operation - Factory Setting +# +# S6 - Printer +# ------------ +# sw1, sw2, sw6, sw7 Reserved - Factory 0 +# +# Printer Port Selection +# same as Modem above, bit 8 (when 8 DATA bits) is always = 0 +# +# sw8 ON enables Printer Port +# OFF disables Printer Port - Factory Setting +# +# S7 - Polling Address +# -------------------- +# sw1-7 Establish ASCII character which designates terminal polling address +# ON = logic 0 +# OFF = logic 1 - Factory Setting +# sw8 ON enables Polling Option +# OFF disables Polling Option - Factory Setting +# +# +# On some older adm31s, S4 does not exist, and S5-sw6 is not defined. +# +# This adm31 entry uses underline as the standout mode. +# If the adm31 gives you trouble with standout mode, check the DIP switch in +# position 6, bank @c11, 25% from back end of the circuit board. Should be +# OFF. If there is no such switch, you have an old adm31 and must use oadm31. +# (adm31: removed obsolete ":ma=j^Jk^P^K^Pl ^R^L^L :" -- esr) +adm31|lsi adm31 with sw6 set for underline mode, + am, mir, + cols#80, lines#24, + bel=^G, clear=\E*, cr=^M, cub1=^H, cud1=^J, cuf1=^L, + cup=\E=%p1%{32}%+%c%p2%{32}%+%c, cuu1=^K, dch1=\EW, + dl1=\ER, ed=\EY, el=\ET, home=^^, il1=\EE, ind=^J, is2=\Eu\E0, + kcub1=^H, kcud1=^J, kcuf1=^L, kcuu1=^K, kf0=^A0\r, kf1=^A1\r, + kf2=^A2\r, kf3=^A3\r, kf4=^A4\r, kf5=^A5\r, kf6=^A6\r, + kf7=^A7\r, kf8=^A8\r, kf9=^A9\r, rmir=\Er, rmso=\EG0, + rmul=\EG0, sgr0=\EG0, smir=\Eq, smso=\EG1, smul=\EG1, +adm31-old|o31|old adm31, + rmul@, smso=\EG4, smul@, use=adm31, +# LSI ADM-36 from Col. George L. Sicherman <gloria!colonel> via BRL +adm36|LSI ADM36, + if=/usr/lib/tabset/vt100, + is2=\E<\E>\E[6;?2;?7;?8h\E[4;20;?1;?3;?4;?5;?6;?18;?19l, use=vt100, +# (adm42: removed obsolete ":ma=^K^P:" -- esr) +adm42|lsi adm42, + am, + cols#80, lines#24, + bel=^G, cbt=\EI, clear=\E;, cr=^M, cub1=^H, cud1=^J, cuf1=^L, + cup=\E=%p1%{32}%+%c%p2%{32}%+%c, cuu1=^K, + cvvis=\EC\E3 \E3(, dch1=\EW, dl1=\ER, ed=\EY, el=\ET, ht=^I, + il1=\EE$<270>, ind=^J, invis@, ip=$<6*>, kcub1=^H, kcud1=^J, + kcuf1=^L, kcuu1=^K, khome=^^, pad=\177, rmir=\Er, rmul@, + smir=\Eq, smul@, + use=adm+sgr, +# The following termcap for the Lear Siegler ADM-42 leaves the +# "system line" at the bottom of the screen blank (for those who +# find it distracting otherwise) +adm42-ns|lsi adm-42 with no system line, + cbt=\EI\EF \011, clear=\E;\EF \011, + cup=\E=%p1%{32}%+%c%p2%{32}%+%c$<6>\EF \011, + dch1=\EW\EF \011, dl1=\ER\EF \011, ed=\EY\EF \011, + el=\ET\EF \011, il1=\EE\EF \011, rmir=\Er\EF \011, + smir=\Eq\EF \011, + use=adm42, +# ADM 1178 terminal -- rather like an ADM-42. Manual is dated March 1 1985. +# The insert mode of this terminal is commented out because it's broken for our +# purposes in that it will shift the position of every character on the page, +# not just the cursor line! +# From: Michael Driscoll <fenris@lightspeed.net> 10 July 1996 +adm1178|1178|lsi adm1178, + am, + cols#80, lines#24, xmc#1, + bel=^G, bold=\E(, cbt=\EI, clear=\E+, cr=^M, cub1=^H, cud1=^J, + cuf1=^L, cup=\E=%p1%{32}%+%c%p2%{32}%+%c, cuu1=^K, + cvvis=\EC\E3 \E3(, dch1=\EW, dl1=\ER, ed=\EY, el=\ET, + home=^^, ht=^I, il1=\EE, ind=^J, ip=$<6*/>, kbs=^H, kcub1=^H, + kcud1=^J, nel=^M^J, pad=\177, rev=\EG4, rmso=\EG0, rmul=\EG0, + sgr0=\E), smso=\EG4, smul=\EG1, + +#### Prime +# +# Yes, Prime made terminals. These entries were posted by Kevin J. Cummings +# <cummings@primerd.prime.com> on 14 Dec 1992 and lightly edited by esr. +# Prime merged with ComputerVision in the late 1980s; you can reach them at: +# +# ComputerVision Services +# 500 Old Connecticut Path +# Framingham, Mass. +# + +# Standout mode is dim reverse-video. +pt100|pt200|wren|fenix|prime pt100/pt200, + am, bw, mir, msgr, + cols#80, it#8, lines#24, + cbt=\E[Z, clear=\E?, cr=^M, cub=\E[%p1%dD, cub1=^H, + cud=\E[%p1%dB, cud1=\ED, cuf=\E[%p1%dC, cuf1=\E[C, + cup=\E0%p1%{33}%+%c%p2%{33}%+%c, cuu=\E[%p1%dA, + cuu1=\EM, dch=\E[%p1%dP, dch1=\E[P, dim=\E[2m, dl=\E[M, + ed=\E[J\E[r, el=\E[K\E[t, flash=\E$$<200/>\E$P, + home=\E$B, ht=^I, il1=\E[L\E[t, ind=^J, kbs=^H, kcub1=\E[D, + kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A, khome=\E$A, nel=^M^J, + rmcup=, rmir=\E[4l, rmkx=\E[>13l, rmso=\E[m, rmul=\E[m, + sgr0=\E[m, + smcup=\E[>1l\E[>2l\E[>16l\E[4l\E[>9l\E[20l\E[>3l\E[>7h\E[>12l\E[1Q, + smir=\E[4h, smkx=\E[>13h, smso=\E[2;7m, smul=\E[4m, +pt100w|pt200w|wrenw|fenixw|prime pt100/pt200 in 132-column mode, + cols#132, + cup=\E[%i%p1%d;%p2%dH, use=pt100, +pt250|Prime PT250, + rmso@, smso@, use=pt100, +pt250w|Prime PT250 in 132-column mode, + rmso@, smso@, use=pt100w, + +#### Qume (qvt) +# +# Qume, Inc. +# 3475-A North 1st Street +# San Jose CA 95134 +# Vox: (800)-457-4447 +# Fax: (408)-473-1510 +# Net: josed@techsupp.wyse.com (Jose D'Oliveira) +# +# Qume was bought by Wyse, but still (as of early 1995) has its own support +# group and production division. +# +# Discontinued Qume models: +# +# The qvt101 and qvt102 listed here are long obsolete; so is the qvt101+ +# built to replace them, and a qvt119+ which was a 101+ with available wide +# mode (132 columns). There was a qvt103 which added vt100/vt131 emulations +# and an ANSI-compatible qvt203 that replaced it. Qume started producing +# ANSI-compatible terminals with the qvt323 and qvt61. +# +# Current Qume models (as of February 1995): +# +# All current Qume terminals have ANSI-compatible operation modes. +# Qume is still producing the qvt62, which features emulations for other +# popular lines such as ADDS, and dual-host capabilities. The qvt82 is +# designed for use as a SCO ANSI terminal. The qvt70 is a color terminal +# with many emulations including Wyse370, Wyse 325, etc. Their newest +# model is the qvt520, which is vt420-compatible. +# +# There are some ancient printing Qume terminals under `Daisy Wheel Printers' +# +# If you inherit a Qume without docs, try Ctrl-Shift-Setup to enter its +# setup mode. Shift-s should be a configuration save to NVRAM. + +qvt101|qvt108|qume qvt 101 and QVT 108, + xmc#1, use=qvt101+, + +# This used to have <cvvis=\E.2> but no <cnorm> or <civis>. The BSD termcap +# file had <cvvis=\EM4 \200\200\200>. I've done the safe thing and yanked +# both. The <rev> is from BSD, which also claimed bold=\E( and dim=\E). +# What seems to be going on here is that this entry was designed so that +# the normal highlight is bold and standout is dim plus something else +# (reverse-video maybe? But then, are there two <rev> sequences?) +qvt101+|qvt101p|qume qvt 101 PLUS product, + am, bw, hs, ul, + cols#80, lines#24, xmc#0, + bel=^G, cbt=\EI, clear=^Z, cnorm=\E.4, cr=^M, cub1=^H, cud1=^J, + cuf1=^L, cup=\E=%p1%{32}%+%c%p2%{32}%+%c, cuu1=^K, + dch1=\EW, dl1=\ER, dsl=\Eg\Ef\r, ed=\EY, el=\ET, + flash=\Eb$<200>\Ed, fsl=^M, home=^^, ht=^I, hts=\E1, + ich1=\EQ, il1=\EE, ind=^J, invis@, kbs=^H, kcbt=\EI, kcub1=^H, + kcud1=^J, kcuf1=^L, kcuu1=^K, kdl1=\ER, ked=\EY, kel=\ET, + kf1=^A@\r, kf10=^AI\r, kf2=^AA\r, kf3=^AB\r, kf4=^AC\r, + kf5=^AD\r, kf6=^AE\r, kf7=^AF\r, kf8=^AG\r, kf9=^AH\r, + khome=^^, kich1=\EQ, kil1=\EE, mc4=\EA, mc5=\E@, rmso=\E(, + smso=\E0P\E), tbc=\E3, tsl=\Eg\Ef, + use=adm+sgr, +qvt102|qume qvt 102, + cnorm=\E., use=qvt101, +# (qvt103: added <rmam>/<smam> based on init string -- esr) +qvt103|qume qvt 103, + am, xenl, xon, + cols#80, it#8, lines#24, vt#3, + bel=^G, blink=\E[5m$<2>, bold=\E[1m$<2>, + clear=\E[H\E[2J$<50>, cr=^M, csr=\E[%i%p1%d;%p2%dr, + cub=\E[%p1%dD, cub1=^H, cud=\E[%p1%dB, cud1=^J, + cuf=\E[%p1%dC, cuf1=\E[C$<2>, + cup=\E[%i%p1%d;%p2%dH$<5>, cuu=\E[%p1%dA, + cuu1=\E[A$<2>, ed=\E[J$<50>, el=\E[K$<3>, home=\E[H, ht=^I, + hts=\EH, ind=^J, kbs=^H, kcub1=\EOD, kcud1=\EOB, kcuf1=\EOC, + kcuu1=\EOA, kf1=\EOP, kf2=\EOQ, kf3=\EOR, kf4=\EOS, rc=\E8, + rev=\E[7m$<2>, ri=\EM$<5>, rmam=\E[?7l, rmkx=\E[?1l\E>, + rmso=\E[m$<2>, rmul=\E[m$<2>, + rs2=\E>\E[?3l\E[?4l\E[?5l\E[?7h\E[?8h, sc=\E7, + sgr=\E[%?%p1%t;7%;%?%p2%t;4%;%?%p3%t;7%;%?%p4%t;5%;%?%p6%t;1%;m, + sgr0=\E[m$<2>, smam=\E[?7h, smkx=\E[?1h\E=, + smso=\E[7m$<2>, smul=\E[4m$<2>, tbc=\E[3g, +qvt103-w|qume qvt103 132 cols, + cols#132, lines#24, + rs2=\E>\E[?3h\E[?4l\E[?5l\E[?8h, use=qvt103, +qvt119+|qvt119p|qvt119|qume qvt 119 and 119PLUS terminals, + am, hs, mir, msgr, + cols#80, lines#24, xmc#0, + bel=^G, cbt=\EI, clear=\E*1, cnorm=\E.4, cr=^M, cub1=^H, + cud1=^J, cuf1=^L, cup=\E=%p1%{32}%+%c%p2%{32}%+%c, + cuu1=^K, cvvis=\E.2, dch1=\EW, dl1=\ER, dsl=\Eg\Ef\r, ed=\Ey, + el=\Et, flash=\En0$<200>\En1, fsl=^M, home=^^, ht=^I, + hts=\E1, il1=\EE, ind=^J, is2=\EDF\EC\EG0\Er\E(\E%EX, + kbs=^H, kcub1=^H, kcud1=^J, kcuf1=^L, kcuu1=^K, kf0=^AI\r, + kf1=^A@\r, kf2=^AA\r, kf3=^AB\r, kf4=^AC\r, kf5=^AD\r, + kf6=^AE\r, kf7=^AF\r, kf8=^AG\r, kf9=^AH\r, khome=^^, + mc4=\EA, mc5=\E@, ri=\EJ, rmir=\Er, smir=\Eq, smul=\EG8, + tbc=\E3, tsl=\Eg\Ef, + use=adm+sgr, +qvt119+-25|qvt119p-25|QVT 119 PLUS with 25 data lines, + lines#25, use=qvt119+, +qvt119+-w|qvt119p-w|qvt119-w|QVT 119 and 119 PLUS in 132 column mode, + cols#132, + is2=\EDF\EC\EG0\Er\E(\E%\EX\En4, use=qvt119+, +qvt119+-25-w|qvt119p-25-w|qvt119-25-w|QVT 119 and 119 PLUS 132 by 25, + lines#25, use=qvt119+, +qvt203|qvt203+|qume qvt 203 Plus, + dch1=\E[P$<7>, dl1=\E[M$<99>, il1=\E[L$<99>, ind=\n$<30>, + ip=$<7>, kf0=\E[29~, kf1=\E[17~, kf2=\E[18~, kf3=\E[19~, + kf4=\E[20~, kf5=\E[21~, kf6=\E[23~, kf7=\E[24~, kf8=\E[25~, + kf9=\E[28~, rmir=\E[4l, smir=\E[4h, + use=qvt103, +qvt203-w|qvt203-w-am|qume qvt 203 PLUS in 132 cols (w/advanced video), + cols#132, lines#24, + rs2=\E>\E[?3h\E[?4l\E[?5l\E[?8h, use=qvt203, +# +# Since a command is present for enabling 25 data lines, +# a specific terminfo entry may be generated for the 203. +# If one is desired for the QVT 119 PLUS then 25 lines must +# be selected in the status line (setup line 9). +# +qvt203-25|QVT 203 PLUS with 25 by 80 column mode, + cols#80, lines#25, + is2=\E[=40h\E[?3l, use=qvt203, +qvt203-25-w|QVT 203 PLUS with 25 by 132 columns, + cols#132, lines#25, + rs2=\E[?3h\E[=40h, use=qvt203, + +#### Televideo (tvi) +# +# TeleVideo +# 550 East Brokaw Road +# PO Box 49048 95161 +# San Jose CA 95112 +# Vox: (408)-954-8333 +# Fax: (408)-954-0623 +# +# +# There are some tvi terminals that require incredible amounts of padding and +# some that don't. I'm assuming tvi912 and tvi920 are the old slow ones, and +# tvi912b, tvi912c, tvi920b, tvi920c are the new ones that don't need padding. +# +# All of these terminals (912 to 970 and the tvipt) are discontinued. Newer +# Televideo terminals are ANSI and PC-ANSI compatible. + +tvi803|televideo 803, + clear=\E*$<10>, use=tvi950, + +# Vanilla tvi910 -- W. Gish <cswarren@violet> 10/29/86 +# Switch settings are: +# +# S1 1 2 3 4 +# D D D D 9600 +# D D D U 50 +# D D U D 75 +# D D U U 110 +# D U D D 135 +# D U D U 150 +# D U U D 300 +# D U U U 600 +# U D D D 1200 +# U D D U 1800 +# U D U D 2400 +# U D U U 3600 +# U U D D 4800 +# U U D U 7200 +# U U U D 9600 +# U U U U 19200 +# +# S1 5 6 7 8 +# U D X D 7N1 (data bits, parity, stop bits) (X means ignored) +# U D X U 7N2 +# U U D D 7O1 +# U U D U 7O2 +# U U U D 7E1 +# U U U U 7E2 +# D D X D 8N1 +# D D X U 8N2 +# D U D D 8O1 +# D U U U 8E2 +# +# S1 9 Autowrap +# U on +# D off +# +# S1 10 CR/LF +# U do CR/LF when CR received +# D do CR when CR received +# +# S2 1 Mode +# U block +# D conversational +# +# S2 2 Duplex +# U half +# D full +# +# S2 3 Hertz +# U 50 +# D 60 +# +# S2 4 Edit mode +# U local +# D duplex +# +# S2 5 Cursor type +# U underline +# D block +# +# S2 6 Cursor down key +# U send ^J +# D send ^V +# +# S2 7 Screen colour +# U green on black +# D black on green +# +# S2 8 DSR status (pin 6) +# U disconnected +# D connected +# +# S2 9 DCD status (pin 8) +# U disconnected +# D duplex +# +# S2 10 DTR status (pin 20) +# U disconnected +# D duplex +# (tvi910: removed obsolete ":ma=^Kk^Ll^R^L:"; added <khome>, <cub1>, <cud1>, +# <ind>, <hpa>, <vpa>, <am>, <msgr> from SCO entry -- esr) +tvi910|televideo model 910, + am, msgr, + cols#80, it#8, lines#24, xmc#1, + bel=^G, cbt=\EI, clear=^Z, cr=^M, cub1=^H, cud1=^J, cuf1=^L, + cup=\E=%p1%{32}%+%c%p2%{32}%+%c, cuu1=^K, ed=\EY, el=\ET, + home=\E=\001\001, hpa=\E]%p1%{32}%+%c, ht=^I, + if=/usr/share/tabset/stdcrt, ind=^J, invis@, kbs=^H, + kcub1=^H, kcud1=^J, kcuf1=^L, kcuu1=^K, kf0=^AI\r, kf1=^A@\r, + kf2=^AA\r, kf3=^AB\r, kf4=^AC\r, kf5=^AD\r, kf6=^AE\r, + kf7=^AF\r, kf8=^AG\r, kf9=^AH\r, khome=^^, + vpa=\E[%p1%{32}%+%c, use=adm+sgr, +# From: Alan R. Rogers <rogers%albany@csnet-relay> +# as subsequently hacked over by someone at SCO +# (tvi910+: removed obsolete ":ma=^K^P^L :" -- esr) +# +# Here are the 910+'s DIP switches (U = up, D = down, X = don't care): +# +# S1 1 2 3 4: +# D D D D 9600 D D D U 50 D D U D 75 D D U U 110 +# D U D D 135 D U D U 150 D U U D 300 D U U U 600 +# U D D D 1200 U D D U 1800 U D U D 2400 U D U U 3600 +# U U D D 4800 U U D U 7200 U U U D 9600 U U U U 19200 +# +# S1 5 6 7 8: +# U D X D 7N1 U D X U 7N2 U U D D 7O1 U U D U 7O2 +# U U U D 7E1 U U U U 7E2 D D X D 8N1 D D X U 8N2 +# D U D D 8O1 D U U U 8E2 +# +# S1 9 Autowrap (U = on, D = off) +# S1 10 CR/LF (U = CR/LF on CR received, D = CR on CR received) +# S2 1 Mode (U = block, D = conversational) +# S2 2 Duplex (U = half, D = full) +# S2 3 Hertz (U = 50, D = 60) +# S2 4 Edit mode (U = local, D = duplex) +# S2 5 Cursor type (U = underline, D = block) +# S2 6 Cursor down key (U = send ^J, D = send ^V) +# S2 7 Screen colour (U = green on black, D = black on green) +# S2 8 DSR status (pin 6) (U = disconnected, D = connected) +# S2 9 DCD status (pin 8) (U = disconnected, D = connected) +# S2 10 DTR status (pin 20) (U = disconnected, D = connected) +# +tvi910+|televideo 910+, + dch1=\EW, dl1=\ER$<33*>, home=^^, ich1=\EQ, il1=\EE$<33*>, + kf0=^A@\r, kf1=^AA\r, kf2=^AB\r, kf3=^AC\r, kf4=^AD\r, + kf5=^AE\r, kf6=^AF\r, kf7=^AG\r, kf8=^AH\r, kf9=^AI\r, + ll=\E=7\s, + use=tvi910, + +# (tvi912: removed obsolete ":ma=^K^P^L :", added <flash> and +# <khome> from BRL entry -- esr) +tvi912|tvi914|tvi920|old televideo 912/914/920, + am, msgr, + cols#80, it#8, lines#24, xmc#1, + bel=^G, clear=^Z, cr=^M, cub1=^H, cud1=^J, cuf1=^L, + cup=\E=%p1%{32}%+%c%p2%{32}%+%c, cuu1=^K, dch1=\EW, + dl1=\ER$<33*>, ed=\Ey, el=\ET, flash=\Eb$<50/>\Ed, home=^^, + ht=^I, hts=\E1, ich1=\EQ, if=/usr/share/tabset/stdcrt, + il1=\EE$<33*>, ind=^J, kbs=^H, kcub1=^H, kcud1=^J, kcuf1=^L, + kcuu1=^K, kf0=^AI\r, kf1=^A@\r, kf2=^AA\r, kf3=^AB\r, + kf4=^AC\r, kf5=^AD\r, kf6=^AE\r, kf7=^AF\r, kf8=^AG\r, + kf9=^AH\r, khome=^^, rmso=\Ek, rmul=\Em, smso=\Ej, smul=\El, + tbc=\E3, +# the 912 has a <funct> key that's like shift: <funct>8 xmits "^A8\r". +# The 920 has this plus real function keys that xmit different things. +# Terminfo makes you use the funct key on the 912 but the real keys on the 920. +tvi912c|tvi912b|new televideo 912, + dl1=\ER$<5*>, il1=\EE$<5*>, use=tvi912, +# set to page 1 when entering curses application (\E-17 ) +# reset to page 0 when exiting curses application (\E-07 ) +tvi912-2p|tvi920-2p|tvi-2p|televideo w/2 pages, + rmcup=\E-07\s, smcup=\E-17\s, use=tvi912, +# We got some new tvi912c terminals that act really weird on the regular +# termcap, so one of our gurus worked this up. Seems that cursor +# addressing is broken. +tvi912cc|tvi912 at cowell college, + cup@, use=tvi912c, + +# Here are the switch settings for the tvi920c: +# +# S1 (Line), and S3 (Printer) baud rates -- put one, and only one, switch down: +# 2: 9600 3: 4800 4: 2400 5: 1200 +# 6: 600 7: 300 8: 150 9: 75 +# 10: 110 +# +# S2 UART/Terminal options: +# Up Down +# 1: Not used Not allowed +# 2: Alternate character set Standard character set +# 3: Full duplex Half duplex +# 4: 50 Hz refresh 60 Hz refresh +# 5: No parity Send parity +# 6: 2 stop bits 1 stop bit +# 7: 8 data bits 7 data bits +# 8: Not used Not allowed on Rev E or lower +# 9: Even parity Odd parity +# 10: Steady cursor Blinking cursor +# (On Rev E or lower, use W25 instead of switch 10.) +# +# S5 UART/Terminal options: +# Open Closed +# 1: P3-6 Not connected DSR received on P3-6 +# 2: P3-8 Not connected DCD received on P3-8 +# +# 3 Open, 4 Open: P3-20 Not connected +# 3 Open, 4 Closed: DTR on when terminal is on +# 3 Closed, 4 Open: DTR is connected to RTS +# 3 Closed, 4 Closed: Not allowed +# +# 5 Closed: HDX printer (hardware control) Rev. K with extension port off, +# all data transmitted out of the modem port (P3) will also be +# transmitted out of the printer port (P4). +# +# 6 Open, 7 Open: Not allowed +# 6 Open, 7 Closed: 20ma current loop input +# 6 Closed, 7 Open: RS232 input +# 6 Closed, 7 Closed: Not allowed +# +# Jumper options: +# If the jumper is installed, the effect will occur (the next time the terminal +# is switched on). +# +# S4/W31: Enables automatic LF upon receipt of CR from +# remote or keyboard. +# S4/W32: Enables transmission of EOT at the end of Send. If not +# installed, a carriage return is sent. +# S4/W33: Disables automatic carriage return in column 80. +# S4/W34: Selects Page Print Mode as initial condition. If not +# installed, Extension Mode is selected. +# +tvi920b|tvi920c|new televideo 920, + dl1=\ER$<5*>, il1=\EE$<5*>, kf0=^AI\r, kf1=^A@\r, + kf2=^AA\r, kf3=^AB\r, kf4=^AC\r, kf5=^AD\r, kf6=^AE\r, + kf7=^AF\r, kf8=^AG\r, kf9=^AH\r, + use=tvi912, + +# Televideo 921 and variants +# From: Tim Theisen <tim@cs.wisc.edu> 22 Sept 1995 +# (tvi921: removed :ko=bt: before translation, I see no backtab cap; +# also added empty <acsc> to suppress tic warning -- esr) +tvi921|televideo model 921 with sysline same as page & real vi function, + am, hs, xenl, xhp, + cols#80, lines#24, xmc#0, + acsc=, clear=^Z, cnorm=\E.3, cr=^M, cub1=^H, cud1=^V, cuf1=^L, + cup=\E=%p1%{32}%+%c%p2%{32}%+%c$<3/>, cuu1=^K, + cvvis=\E.2, dch1=\EW, dl1=\ER$<1*/>, dsl=\Ef\r\Eg, ed=\EY, + el=\ET, fsl=\Eg, home=^^, ht=^I, ich1=\EQ, + if=/usr/share/tabset/stdcrt, il1=\EE, ind=^J, invis@, + is2=\El\E"\EF1\E.3\017\EA\E<, kbs=^H, kclr=^Z, kcub1=^H, + kcud1=^V, kcuf1=^L, kcuu1=^K, kdch1=\EW, kdl1=\ER$<1*/>, + ked=\EY, kel=\ET, kich1=\EQ, kil1=\EE, nel=^M^J, rmacs=\E%, + rmir=, smacs=\E$, smir=, tsl=\Ef\EG0, + use=adm+sgr, +# without the beeper +# (tvi92B: removed :ko=bt: before translation, I see no backtab cap; +# also added empty <acsc> to suppress tic warning -- esr) +tvi92B|televideo model 921 with sysline same as page & real vi function & no beeper, + am, hs, xenl, xhp, + cols#80, lines#24, xmc#0, + acsc=, clear=^Z, cnorm=\E.3, cr=^M, cub1=^H, cud1=^V, cuf1=^L, + cup=\E=%p1%{32}%+%c%p2%{32}%+%c$<3/>, cuu1=^K, + cvvis=\E.2, dch1=\EW, dl1=\ER$<1*/>, dsl=\Ef\r\Eg, ed=\EY, + el=\ET, flash=\Eb$<200/>\Ed, fsl=\Eg, home=^^, ht=^I, + ich1=\EQ, if=/usr/share/tabset/stdcrt, il1=\EE, ind=^J, + invis@, is2=\El\E"\EF1\E.3\017\EA\E<, kbs=^H, kclr=^Z, + kcub1=^H, kcud1=^V, kcuf1=^L, kcuu1=^K, kdch1=\EW, + kdl1=\ER$<1*/>, ked=\EY, kel=\ET, kich1=\EQ, kil1=\EE, + nel=^M^J, rmacs=\E%, smacs=\E$, tsl=\Ef\EG0, + use=adm+sgr, +# (tvi92D: removed :ko=bt: before translation, I see no backtab cap -- esr) +tvi92D|tvi92B with DTR instead of XON/XOFF & better padding, + dl1=\ER$<2*/>, il1=\EE$<2*/>, + is2=\El\E"\EF1\E.3\016\EA\E<, kdl1=\ER$<2*/>, + kil1=\EE$<2*/>, + use=tvi92B, + +# (tvi924: This used to have <dsl=\Es0>, <fsl=\031>. I put the new strings +# in from a BSD termcap file because it looks like they do something the +# old ones skip -- esr) +tvi924|televideo tvi924, + am, bw, hs, in, mir, msgr, xenl, xon, + cols#80, it#8, lines#24, wsl#80, xmc#0, + bel=^G, blink=\EG2, cbt=\EI, civis=\E.0, clear=\E*0, + cnorm=\E.3, cr=^M, csr=\E_%p1%{32}%+%c%p2%{32}%+%c, + cub1=^H, cud1=^V, cuf1=^L, + cup=\E=%p1%{32}%+%c%p2%{32}%+%c, cuu1=^K, cvvis=\E.1, + dch1=\EW, dl1=\ER, dsl=\Es0\Ef\031, ed=\Ey, el=\Et, + flash=\Eb$<200>\Ed, fsl=\031\Es1, home=^^, ht=^I, hts=\E1, + ich1=\EQ, if=/usr/share/tabset/stdcrt, il1=\EE, ind=^J, + invis@, is1=\017\E%\E'\E(\EDF\EC\EG0\EN0\Es0\Ev0, + kbs=^H, kclr=\E*0, kcub1=^H, kcud1=^V, kcuf1=^L, kcuu1=^K, + kdch1=\EW, kdl1=\ER, ked=\Ey, kel=\Et, kf0=^A@\r, kf1=^AA\r, + kf10=^AJ\r, kf11=^AK\r, kf12=^AL\r, kf13=^AM\r, kf14=^AN\r, + kf15=^AO\r, kf2=^AB\r, kf3=^AC\r, kf4=^AD\r, kf5=^AE\r, + kf6=^AF\r, kf7=^AG\r, kf8=^AH\r, kf9=^AI\r, khome=^^, + kich1=\EQ, kil1=\EE, lf0=F1, lf1=F2, lf10=F11, lf2=F3, lf3=F4, + lf4=F5, lf5=F6, lf6=F7, lf7=F8, lf8=F9, lf9=F10, + pfkey=\E|%p1%{49}%+%c%p2%s\031, ri=\Ej, tbc=\E3, tsl=\Ef, use=adm+sgr, + +# TVI925 DIP switches. In each of these, D = Down and U = Up, +# +# Here are the settings for the external (baud) switches (S1): +# +# Position Baud +# 7 8 9 10 [Printer] +# 1 2 3 4 [Main RS232] +# ----------------------------------------------------- +# D D D D 9600 +# D D D U 50 +# D D U D 75 +# D D U U 110 +# D U D D 135 +# D U D U 150 +# D U U D 300 +# D U U U 600 +# U D D D 1200 +# U D D U 1800 +# U D U D 2400 +# U D U U 3600 +# U U D D 4800 +# U U D U 7200 +# U U U D 9600 +# U U U U 19200 +# +# +# Settings for word length and stop-bits (S1) +# +# Position Description +# 5 6 +# --------------------------- +# U - 7-bit word +# D - 8-bit word +# - U 2 stop bits +# - D 1 stop bit +# +# +# S2 (external) settings +# +# Position Up Dn Description +# -------------------------------------------- +# 1 X Local edit +# X Duplex edit (transmit editing keys) +# -------------------------------------------- +# 2 X 912/920 emulation +# X 925 +# -------------------------------------------- +# 3 X +# 4 X No parity +# 5 X +# -------------------------------------------- +# 3 X +# 4 X Odd parity +# 5 X +# -------------------------------------------- +# 3 X +# 4 X Even parity +# 5 X +# -------------------------------------------- +# 3 X +# 4 X Mark parity +# 5 X +# -------------------------------------------- +# 3 X +# 4 X Space parity +# 5 X +# -------------------------------------------- +# 6 X White on black display +# X Black on white display +# -------------------------------------------- +# 7 X Half Duplex +# 8 X +# -------------------------------------------- +# 7 X Full Duplex +# 8 X +# -------------------------------------------- +# 7 X Block mode +# 8 X +# -------------------------------------------- +# 9 X 50 Hz +# X 60 Hz +# -------------------------------------------- +# 10 X CR/LF (Auto LF) +# X CR only +# +# S3 (internal switch) settings: +# +# Position Up Dn Description +# -------------------------------------------- +# 1 X Keyclick off +# X Keyclick on +# -------------------------------------------- +# 2 X English +# 3 X +# -------------------------------------------- +# 2 X German +# 3 X +# -------------------------------------------- +# 2 X French +# 3 X +# -------------------------------------------- +# 2 X Spanish +# 3 X +# -------------------------------------------- +# 4 X Blinking block cursor +# 5 X +# -------------------------------------------- +# 4 X Blinking underline cursor +# 5 X +# -------------------------------------------- +# 4 X Steady block cursor +# 5 X +# -------------------------------------------- +# 4 X Steady underline cursor +# 5 X +# -------------------------------------------- +# 6 X Screen blanking timer (ON) +# X Screen blanking timer (OFF) +# -------------------------------------------- +# 7 X Page attributes +# X Line attributes +# -------------------------------------------- +# 8 X DCD disconnected +# X DCD connected +# -------------------------------------------- +# 9 X DSR disconnected +# X DSR connected +# -------------------------------------------- +# 10 X DTR Disconnected +# X DTR connected +# -------------------------------------------- +# +# (tvi925: BSD has <clear=\E*>. I got <is2> and <ri> from there -- esr) +tvi925|televideo 925, + am, bw, hs, ul, + cols#80, lines#24, xmc#1, + bel=^G, cbt=\EI, clear=^Z, cnorm=\E.4, cr=^M, cub1=^H, cud1=^V, + cuf1=^L, cup=\E=%p1%{32}%+%c%p2%{32}%+%c, cuu1=^K, + cvvis=\E.2, dch1=\EW, dl1=\ER, dsl=\Eh, ed=\EY, el=\ET, + flash=\Eb$<200>\Ed, fsl=^M\Eg, home=^^, ht=^I, hts=\E1, + ich1=\EQ, il1=\EE, ind=^J, invis@, is2=\El\E", kbs=^H, kclr=^Z, + kcub1=^H, kcud1=^V, kcuf1=^L, kcuu1=^K, kdch1=\EW, kdl1=\ER, + ked=\EY, kel=\ET, kf0=^AI\r, kf1=^A@\r, kf2=^AA\r, kf3=^AB\r, + kf4=^AC\r, kf5=^AD\r, kf6=^AE\r, kf7=^AF\r, kf8=^AG\r, + kf9=^AH\r, khome=^^, kich1=\EQ, kil1=\EE, ri=\Ej, tbc=\E3, + tsl=\Eh\Ef, + use=adm+sgr, +# TeleVideo 925 from Mitch Bradley <sun!wmb> via BRL +# to avoid "magic cookie" standout glitch: +tvi925-hi|TeleVideo Model 925 with half intensity standout mode, + xmc@, + kbs=^H, kcub1=^H, kcud1=^J, rmso=\E(, smso=\E), use=tvi925, + +# From: Todd Litwin <litwin@litwin.jpl.nasa.gov> 28 May 1993 +# Originally Tim Curry, Univ. of Central Fla., <duke!ucf-cs!tim> 5/21/82 +# for additional capabilities, +# The following tvi descriptions from B:pjphar and virus!mike +# is for all 950s. It sets the following attributes: +# full duplex (\EDF) write protect off (\E() +# conversation mode (\EC) graphics mode off (\E%) +# white on black (\Ed) auto page flip off (\Ew) +# turn off status line (\Eg) clear status line (\Ef\r) +# normal video (\E0) monitor mode off (\EX or \Eu) +# edit mode (\Er) load blank char to space (\Ee\040) +# line edit mode (\EO) enable buffer control (^O) +# protect mode off (\E\047) duplex edit keys (\El) +# program unshifted send key to send line all (\E016) +# program shifted send key to send line unprotected (\E004) +# set the following to nulls: +# field delimiter (\Ex0\200\200) +# line delimiter (\Ex1\200\200) +# start-protected field delimiter (\Ex2\200\200) +# end-protected field delimiter (\Ex3\200\200) +# set end of text delimiter to carriage return/null (\Ex4\r\200) +# +# TVI 950 Switch Setting Reference Charts +# +# TABLE 1: +# +# S1 1 2 3 4 5 6 7 8 9 10 +# +-----------------------+-----+-----+-----------------------+ +# | Computer Baud Rate |Data |Stop | Printer Baud Rate | +# | |Bits |Bits | | +# +------+-----------------------+-----+-----+-----------------------+ +# | Up | See | 7 | 2 | See | +# +------+-----------------------+-----+-----+-----------------------+ +# | Down | TABLE 2 | 8 | 1 | TABLE 2 | +# +------+-----------------------+-----+-----+-----------------------+ +# +# +# S2 1 2 3 4 5 6 7 8 9 10 +# +-----+-----+-----------------+-----+-----------+-----+-----+ +# |Edit |Cursr| Parity |Video|Transmiss'n| Hz |Click| +# +------+-----+-----+-----------------+-----+-----------+-----+-----+ +# | Up | Dplx|Blink| See |GonBk| See | 60 | Off | +# +------+-----+-----+-----------------+-----+-----------+-----+-----+ +# | Down |Local|St'dy| TABLE 3 |BkonG| CHART | 50 | On | +# +------+-----+-----+-----------------+-----+-----------+-----+-----+ +# +# TABLE 2: +# +# +-----------+-----+-----+-----+-----+-----------+ +# | Display | 1 | 2 | 3 | 4 | Baud | +# +-----------+-----+-----+-----+-----+ | +# | Printer | 7 | 8 | 9 | 10 | Rate | +# +-----------+-----+-----+-----+-----+-----------+ +# | D | D | D | D | 9600 | +# | U | D | D | D | 50 | +# | D | U | D | D | 75 | +# | U | U | D | D | 110 | +# | D | D | U | D | 135 | +# | U | D | U | D | 150 | +# | D | U | U | D | 300 | +# | U | U | U | D | 600 | +# | D | D | D | U | 1200 | +# | U | D | D | U | 1800 | +# | D | U | D | U | 2400 | +# | U | U | D | U | 3600 | +# | D | D | U | U | 4800 | +# | U | D | U | U | 7200 | +# | D | U | U | U | 9600 | +# | U | U | U | U | 19200 | +# +-----+-----+-----+-----+-----------+ +# +# TABLE 3: +# +-----+-----+-----+-----------+ +# | 3 | 4 | 5 | Parity | +# +-----+-----+-----+-----------+ +# | X | X | D | None | +# | D | D | U | Odd | +# | D | U | U | Even | +# | U | D | U | Mark | +# | U | U | U | Space | +# +-----+-----+-----+-----------+ +# X = don't care +# +# CHART: +# +-----+-----+-----------------+ +# | 7 | 8 | Communication | +# +-----+-----+-----------------+ +# | D | D | Half Duplex | +# | D | U | Full Duplex | +# | U | D | Block | +# | U | U | Local | +# +-----+-----+-----------------+ +# +# (tvi950: early versions had obsolete ":ma=^Vj^Kk^Hh^Ll^^H:". +# I also inserted <ich1> and <kich1>; the :ko: string indicated that <ich> +# should be present and all tvi native modes use the same string for this. +# Finally, note that BSD has cud1=^V. -- esr) +tvi950|televideo 950, + am, hs, mir, msgr, xenl, xon, + cols#80, it#8, lines#24, xmc#1, + acsc=b\011c\014d\re\ni\013, bel=^G, cbt=\EI, clear=\E*, + cr=^M, cub1=^H, cud1=^J, cuf1=^L, + cup=\E=%p1%{32}%+%c%p2%{32}%+%c, cuu1=^K, dch1=\EW, + dl1=\ER, dsl=\Eg\Ef\r, ed=\Ey, el=\Et, flash=\Eb$<200/>\Ed, + fsl=^M, home=^^, ht=^I, hts=\E1, ich1=\EQ, il1=\EE, ind=^J, + invis@, + is2=\EDF\EC\Ed\EG0\Eg\Er\EO\E'\E(\E%\Ew\EX\Ee \017\011\El\E016\E004\Ex0\0\0\Ex1\0\0\Ex2\0\0\011\Ex3\0\0\Ex4\r\0\Ef\r, + kbs=^H, kcbt=\EI, kclr=\E*, kcub1=^H, kcud1=^V, kcuf1=^L, + kcuu1=^K, kdch1=\EW, kdl1=\ER, ked=\Ey, kel=\Et, kf0=^A0\r, + kf1=^A@\r, kf2=^AA\r, kf3=^AB\r, kf4=^AC\r, kf5=^AD\r, + kf6=^AE\r, kf7=^AF\r, kf8=^AG\r, kf9=^AH\r, khome=^^, + kich1=\EQ, kil1=\EE, mc4=\Ea, mc5=\E`, ri=\Ej, rmacs=^X, + rmir=\Er, smacs=^U, smir=\Eq, tbc=\E3, tsl=\Eg\Ef, + use=adm+sgr, +# +# is for 950 with two pages adds the following: +# set 48 line page (\E\\2) +# place cursor at page 0, line 24, column 1 (\E-07 ) +# set local (no send) edit keys (\Ek) +# +# two page 950 adds the following: +# when entering ex, set 24 line page (\E\\1) +# when exiting ex, reset 48 line page (\E\\2) +# place cursor at 0,24,1 (\E-07 ) +# set duplex (send) edit keys (\El) when entering vi +# set local (no send) edit keys (\Ek) when exiting vi +# +tvi950-2p|televideo950 w/2 pages, + is2=\EDF\EC\Ed\EG0\Eg\Er\EO\E'\E(\E%\Ew\EX\Ee \017\011\Ek\E016\E004\Ex0\0\0\Ex1\0\0\Ex2\0\0\011\Ex3\0\0\Ex4\r\0\E\\2\E-07 \011, + rmcup=\E\\2\E-07\s, rmkx=\Ek, smcup=\E\\1\E-07\s, + smkx=\El, + use=tvi950, +# +# is for 950 with four pages adds the following: +# set 96 line page (\E\\3) +# place cursor at page 0, line 24, column 1 (\E-07 ) +# +# four page 950 adds the following: +# when entering ex, set 24 line page (\E\\1) +# when exiting ex, reset 96 line page (\E\\3) +# place cursor at 0,24,1 (\E-07 ) +# +tvi950-4p|televideo950 w/4 pages, + is2=\EDF\EC\Ed\EG0\Eg\Er\EO\E'\E(\E%\Ew\EX\Ee \017\011\Ek\E016\E004\Ex0\0\0\Ex1\0\0\Ex2\0\0\011\Ex3\0\0\Ex4\r\0\E\\3\E-07 \011, + rmcup=\E\\3\E-07\s, rmkx=\Ek, smcup=\E\\1\E-07\s, + smkx=\El, + use=tvi950, +# +# <is2> for reverse video 950 changes the following: +# set reverse video (\Ed) +# +# set vb accordingly (\Ed ...delay... \Eb) +# +tvi950-rv|televideo950 rev video, + flash=\Ed$<200/>\Eb, + is2=\EDF\EC\Eb\EG0\Eg\Er\EO\E'\E(\E%\Ew\EX\Ee \017\011\El\E016\E004\Ex0\0\0\Ex1\0\0\Ex2\0\0\011\Ex3\0\0\Ex4\r\0, use=tvi950, + +# tvi950-rv-2p uses the appropriate entries from 950-2p and 950-rv +tvi950-rv-2p|televideo950 rev video w/2 pages, + flash=\Ed$<200/>\Eb, + is2=\EDF\EC\Eb\EG0\Eg\Er\EO\E'\E(\E%\Ew\EX\Ee \017\011\Ek\E016\E004\Ex0\0\0\Ex1\0\0\Ex2\0\0\011\Ex3\0\0\Ex4\r\0\E\\2\E-07\s, + rmcup=\E\\2\E-07\s, rmkx=\Ek, smcup=\E\\1\E-07\s, + smkx=\El, + use=tvi950, + +# tvi950-rv uses the appropriate entries from 950-4p and 950-rv +tvi950-rv-4p|televideo950 rev video w/4 pages, + flash=\Ed$<200/>\Eb, + is2=\EDF\EC\Eb\EG0\Er\EO\E'\E(\E%\Ew\EX\Ee \017\011\Ek\E016\E004\Ex0\0\0\Ex1\0\0\Ex2\0\0\011\Ex3\0\0\Ex4\r\0\E\\3\E-07\s, + rmcup=\E\\3\E-07\s, rmkx=\Ek, smcup=\E\\1\E-07\s, + smkx=\El, + use=tvi950, +# From: Andreas Stolcke <stolcke@icsi.berkeley.edu> +# (tvi955: removed obsolete ":ma:=^Vj^Kk^Hh^Ll^^H"; +# removed incorrect (and overridden) ":do=^J:"; fixed broken continuations in +# the :rs: string, inserted the <ich> implied by the termcap :ko: string. Note +# the :ko: string had :cl: in it, which means that one of the original +# <clear=\E*>, <kclr=\EY> had to be wrong; set <kclr=\E*> because that's what +# the 950 has. Finally, corrected the <kel> string to match the 950 and what +# ko implies -- esr) +# If the BSD termcap file was right, <cup=\E=%p1%{32}%+%c%p2%{32}%+%c> would +# also work. +tvi955|televideo 955, + mc5i, msgr@, + it#8, xmc@, + acsc=0_`RjHkGlFmEnIoPqKsQtMuLvOwNxJ, blink=\EG2, + civis=\E.0, cnorm=\E.2, cud1=^V, cup=\E[%i%p1%d;%p2%dH, + cvvis=\E.1, dim=\E[=5h, ind@, invis=\EG1, + is2=\E[=3l\EF1\Ed\EG0\E[=5l\E%\El, kctab=\E2, khts=\E1, + knp=\EK, kpp=\EJ, krmir=\EQ, ktbc=\E3, mc0=\EP, rmacs=\E%, + rmam=\E[=7l, rmxon=^N, + rs1=\EDF\EC\Eg\Er\EO\E'\E(\Ew\EX\Ee \017\E0P\E6\0\E0p\E4\0\Ef\r, + sgr0=\EG0\E[=5l, smacs=\E$, smam=\E[=7h, smxon=^O, + use=tvi950, +tvi955-w|955-w|televideo955 w/132 cols, + cols#132, + is2=\E[=3h\EF1\Ed\EG0\E[=5l\E%\El, use=tvi955, +# use half-intensity as normal mode, full intensity as <bold> +tvi955-hb|955-hb|televideo955 half-bright, + bold=\E[=5l, dim@, is2=\E[=3l\EF1\Ed\EG0\E[=5h\E%\El, + sgr0=\EG0\E[=5h, + use=tvi955, +# From: Humberto Appleton <beto@cs.utexas.edu>, 880521 UT Austin +# (tvi970: removed ":sg#0:"; removed <rmso>=\E[m, <rmul>=\E[m; +# added <am>/<csr>/<home>/<hpa>/<vpa>/<smcup>/<rmcup> from BRL. +# According to BRL we could have <rmkx>=\E>, <smkx>=\E= but I'm not sure what +# it does to the function keys. I deduced <rmam>/<smam>. +# also added empty <acsc> to suppress tic warning, -- esr) +tvi970|televideo 970, + am, da, db, mir, msgr, + cols#80, it#8, lines#24, + acsc=, cbt=\E[Z, clear=\E[H\E[2J, csr=\E[%i%p1%d;%p2%dr, + cub1=^H, cud1=\ED, cuf1=\E[C, cup=\E[%i%p1%d;%p2%df, + cuu1=\EM, cvvis=\E[1Q, dch1=\E[P, dl1=\E[M, dsl=\Eg\Ef\r, + ed=\E[J, el=\E[K, flash=\E[5m$<200/>\E[m, home=\E[H, + hpa=\E[%i%p1%dG, ht=^I, il1=\E[L, + is2=\E<\E[?21l\E[19h\E[1Q\E[10l\E[7l\E[H\E[2J, + kbs=^H, kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A, + kf1=\E?a, kf2=\E?b, kf3=\E?c, kf4=\E?d, kf5=\E?e, kf6=\E?f, + kf7=\E?g, kf8=\E?h, kf9=\E?i, khome=\E[H, ri=\EM, rmacs=\E(B, + rmam=\E[?7h, rmcup=, rmir=\E[4l, rmso=\E[m, rmul=\E[m, + sgr0=\E[m, smacs=\E(B, smam=\E[?7l, + smcup=\E[?20l\E[?7h\E[1Q, smir=\E[4h, smso=\E[7m, + smul=\E[4m, vpa=\E[%i%p1%dd, +tvi970-vb|televideo 970 with visual bell, + flash=\E[?5h\0\0\0\0\0\0\0\0\0\0\0\0\0\E[?5l, use=tvi970, +tvi970-2p|televideo 970 with using 2 pages of memory, + rmcup=\E[H\E[J\E[V, smcup=\E[U\E[?20l\E[?7h\E[1Q, + use=tvi970, +# Works with vi and rogue. NOTE: Esc v sets autowrap on, Esc u sets 80 chars +# per line (rather than 40), Esc K chooses the normal character set. Not sure +# padding is needed, but adapted from the tvi920c termcap. The <smso> and +# <smul> strings are klutzy, but at least use no screen space. +# (tvipt: removed obsolete ":ma=^Kk^Ll^R^L:". I wish we knew <rmam>, +# its absence means <smam>=\Ev isn't safe to use. -- esr) +# From: Gene Rochlin <armsis@amber.berkeley.edu> 9/19/84. +# The <ed>/<kf0>/<kf1>/<khome>/<mc4>, and <mc5> caps are from BRL, which says: +# F1 and F2 should be programmed as ^A and ^B; required for UNIFY. +tvipt|televideo personal terminal, + am, + cols#80, lines#24, + cbt=\EI, clear=^Z, cub1=^H, cuf1=^L, + cup=\E=%p1%{32}%+%c%p2%{32}%+%c, cuu1=^K, dl1=\ER$<5*>, + ed=\EY, el=\ET, home=^^, if=/usr/share/tabset/stdcrt, + il1=\EE$<5*>, is2=\Ev\Eu\EK, kbs=^H, kcub1=^H, kcud1=^J, + kcuf1=^L, kcuu1=^K, kf0=^A, kf1=^B, khome=^^, mc4=^T, mc5=^R, + rmso=\EF, rmul=\EF, smso=\EG1@A\EH, smul=\EG1B@\EH, +# From: Nathan Peterson <nathan@sco.com>, 03 Sep 1996 +tvi9065|televideo 9065, + am, bw, chts, hs, mc5i, mir, msgr, xenl, xon, + cols#80, it#8, lh#1, lines#25, lm#0, lw#9, ma#4, nlab#8, vt#0, + wnum#0, wsl#30, + acsc='r0_jhkglfmeniopqksqtmulvownxj, bel=^G, + blink=\EG2, bold=\EG\,, cbt=\EI, civis=\E.0, clear=^Z, + cnorm=\E.3, cr=^M, csr=\E[%i%p1%d;%p2%dr, cub=\E[%p1%dD, + cub1=^H, cud=\E[%p1%dB, cud1=^V, cuf=\E[%p1%dC, cuf1=^L, + cup=\E=%p1%{32}%+%c%p2%{32}%+%c, cuu=\E[%p1%dA, + cuu1=^K, cvvis=\E.2, dch=\E[%p1%dP, dch1=\EW, dim=\EGp, + dl=\E[%p1%dM, dl1=\ER, dsl=\E_30\r, ech=\E[%p1%d@, ed=\EY, + el=\ET, flash=\Eb$<15>\Ed, fsl=^M, home=^^, ht=^I, hts=\E1, + ich=\E[%p1%d@, if=/usr/share/tabset/stdcrt, + il=\E[%p1%dL, il1=\EE, ind=^J, indn=\E[%p1%dS, invis=\EG1, + ip=$<3>, + is1=\E"\E%\E'\E(\EG@\EO\EX\E[=5l\E[=6l\E[=7h\Ed\Er, + is2=\EF2\EG0\E\\L, is3=\E<\E[=4l\E[=8h, kHOM=\E\s\s\s, + kbs=^H, kcbt=\EI, kcub1=^H, kcud1=^V, kcuf1=^L, kcuu1=^K, + kdch1=\EW, kf1=^A@\r, kf10=^AI\r, kf11=^AJ\r, kf12=^AK\r, + kf2=^AA\r, kf3=^AB\r, kf4=^AC\r, kf5=^AD\r, kf6=^AE\r, + kf7=^AF\r, kf8=^AG\r, kf9=^AH\r, khome=^^, ll=\E[25;1H, + mc0=\E[0;0i, mc4=\Ea, mc5=\E`, nel=^M^J, + pfkey=\E|%p1%{48}%+%c3%p2%s\031, + pfloc=\E|%p1%{48}%+%c2%p2%s\031, + pfx=\E|%p1%{48}%+%c1%p2%s\031, + pln=\E_%p1%{63}%+%c%p2%s\r, prot=\E&, + rep=\E[%p2%db%p1%c, rev=\EG4, + rf=/usr/share/tabset/stdcrt, ri=\Ej, rin=\E[%p1%dT, + rmacs=\E%, rmam=\E[=7l, rmcup=\E.3\Er\E[1;25r\E[25;0H, + rmdc=\0, rmir=\Er, rmln=\E[4;1v, rmso=\EG0, rmul=\EG0, + rmxon=^N, rs1=\EC\EDF\E[0;0v\E[8;1v\E[=65l, + rs2=\E.b\E[10;20v\E[14;1v\E[3;0v\E[7;0v\E[=11.h\E[=12.h\E[=13.h\E[=14.h\E[=15l\E[=20h\E[=60l\E[=61h\E[=9l\E[=10l\E[=21l\E[=23l\E[=3l\E_40\E_50\En\Ew\Ee \Ex0\0\0\Ex1\0\0\Ex2\0\0\Ex3\0\0\Ex4\0\0\E1, + rs3=\E[=19h\E.3\E9\E0O\0\0\0\0\0\E0o\0\0\0\0\0\E0J\177\0\0\0\0, + sgr=\EG0%?%p1%t\EGt%;%?%p2%t\EG8%;%?%p3%t\EG4%;%?%p4%t\EG2%;%?%p5%t\EGp%;%?%p6%t\EG\,%;%?%p7%t\EG1%;%?%p9%t\E$%e\E%%%;, + sgr0=\EG0, smacs=\E$, smam=\E=7h, smcup=\E.2, smdc=\Er, + smir=\Eq, smln=\E[4;2v, smso=\EGt, smul=\EG8, smxon=^O, + tbc=\E3, tsl=\E[4;1v\E_30, uc=\EG8\EG0, + +#### Visual (vi) +# +# In September 1993, Visual Technology of Westboro, Massachusetts, +# merged with White Pine Software of Nashua, New Hampshire. +# +# White Pine Software may be contacted at +1 603/886-9050. +# Or visit White Pine on the World Wide Web at URL http://www.wpine.com. +# + +# Visual 50 from Beau Shekita, BTL-Whippany <whuxlb!ejs> +# Recently I hacked together the following termcap for Visual +# Technology's Visual 50 terminal. It's a slight modification of +# the vt52 termcap. +# It's intended to run when the Visual 50 is in vt52 emulation mode +# (I know what you're thinking; if it's emulating a vt52, then why +# another termcap? Well, it turns out that the Visual 50 can handle +# <dl1> and db(?) among other things, which the vt52 can't) +# The termcap works OK for the most part. The only problem is on +# character inserts. The whole line gets painfully redrawn for each +# character typed. Any suggestions? +# Beau's entry is combined with the vi50 entry from University of Wisconsin. +# Note especially the <il1> function. <kf4>-<kf6> are really l4-l6 in +# disguise; <kf7>-<kf9> are really l1-l3. +vi50|visual 50, + am, da, db, msgr, + cols#80, it#8, lines#24, + bel=^G, cbt=\Ez$<4/>, clear=\EH\EJ, cr=^M, cub1=^H, cud1=\EB, + cuf1=\EC, cup=\EY%p1%{32}%+%c%p2%{32}%+%c, cuu1=\EA, + dl1=\EM$<3*/>, ed=\EJ, el=\EK$<16/>, home=\EH, ht=^I, + il1=\EL, ind=^J, kbs=^H, kcub1=\ED, kcud1=\EB, kcuf1=\EC, + kcuu1=\EA, kf1=\EP, kf2=\EQ, kf3=\ER, kf4=\EV, kf5=\EE, + kf6=\E], kf7=\EL, kf8=\Ev, kf9=\EM, khome=\EH, nel=^M^J, + ri=\EI, rmso=\ET, rmul=\EW, smso=\EU, smul=\ES, +# this one was BSD & SCO's vi50 +vi50adm|visual 50 in adm3a mode, + am, msgr, + cols#80, it#8, lines#24, + bel=^G, clear=^Z, cr=^M, cub1=^H, cud1=^J, cuf1=^L, + cup=\E=%p1%{32}%+%c%p2%{32}%+%c, cuu1=^K, dl1=\EM, + ed=\Ek, el=\EK, home=\EH, ht=^I, il1=\EL, ind=^J, kbs=^H, + kcub1=\ED, kcud1=\EB, kcuf1=\EC, kcuu1=\EA, khome=\EH, + rmso=\ET, smso=\EU, +# From: Jeff Siegal <jbs@athena.mit.edu> +vi55|Visual 55, + am, mir, msgr, + cols#80, it#8, lines#24, + clear=\Ev, csr=\E_%p1%{65}%+%c%p2%{65}%+%c, cub1=^H, + cud1=^J, cuf1=\EC, cup=\EY%p1%{32}%+%c%p2%{32}%+%c, + cuu1=\EA, dch1=\Ew, dl1=\EM, ed=\EJ, el=\EK, home=\EH, ht=^I, + il1=\EL, is2=\Ev\E_AX\Eb\EW\E9P\ET, kbs=^H, kcub1=\ED, + kcud1=\EB, kcuf1=\EC, kcuu1=\EA, ri=\EI, rmir=\Eb, rmso=\ET, + smir=\Ea, smso=\EU, + +# Visual 200 from BRL +# The following switch settings are assumed for normal operation: +# FULL_DUPLEX SCROLL CR +# AUTO_NEW_LINE_ON VISUAL_200_EMULATION_MODE +# Other switches may be set for operator convenience or communication +# requirements. +# Character insertion is kludged in order to get around the "beep" misfeature. +# (This cap is commented out because <smir>/<rmir> is more efficient -- esr) +# Supposedly "4*" delays should be used for <il1>, <ed>, <clear>, <dch1>, +# and <dl1> strings, but we seem to get along fine without them. +vi200|visual 200, + am, mir, msgr, + cols#80, it#8, lines#24, + acsc=, bel=^G, cbt=\Ez, clear=\Ev, cnorm=\Ec, cr=^M, cub1=^H, + cud1=^J, cuf1=\EC, cup=\EY%p1%{32}%+%c%p2%{32}%+%c, + cuu1=\EA, cvvis=\Ed, dch1=\EO, dim=\E4, dl1=\EM, ed=\Ey, + el=\Ex, home=\EH, ht=^I, hts=\E1, il1=\EL, ind=^J, invis=\Ea, + kbs=^H, kclr=\Ev, kctab=\E2, kcub1=\ED, kcud1=\EB, kcuf1=\EC, + kcuu1=\EA, kdch1=\EO, kdl1=\EM, ked=\EJ, kel=\Et, kf0=\E?p, + kf1=\E?q, kf2=\E?r, kf3=\E?s, kf4=\E?t, kf5=\E?u, kf6=\E?v, + kf7=\E?w, kf8=\E?x, kf9=\E?y, khome=\EH, khts=\E1, kich1=\Ei, + kil1=\EL, krmir=\Ej, mc0=\EH\E], mc4=\EX, mc5=\EW, ri=\EI, + rmacs=\EG, rmkx=\E>, rmso=\E3, + rs1=\E3\Eb\Ej\E\El\EG\Ec\Ek\EX, sgr0=\E3\Eb, smacs=\EF, + smkx=\E=, smso=\E4, tbc=\Eg, +# The older Visuals didn't come with function keys. This entry uses +# <smkx> and <rmkx> so that the keypad keys can be used as function keys. +# If your version of vi doesn't support function keys you may want +# to use vi200-f. +vi200-f|visual 200 no function keys, + is2=\E3\Eb\Ej\E\\\El\EG\Ed\Ek, kf0=\E?p, kf1=\E?q, + kf2=\E?r, kf3=\E?s, kf4=\E?t, kf5=\E?u, kf6=\E?v, kf7=\E?w, + kf8=\E?x, kf9=\E?y, rmkx=\E>, rmso@, smkx=\E=, smso@, + use=vi200, +vi200-rv|visual 200 reverse video, + cnorm@, cvvis@, ri@, rmso=\E3, smso=\E4, use=vi200, + +# the function keys are programmable but we don't reprogram them to their +# default values with <is2> because programming them is very verbose. maybe +# an initialization file should be made for the 300 and they could be stuck +# in it. +# (vi300: added <rmam>/<smam> based on init string -- esr) +vi300|visual 300 ansi x3.64, + am, bw, mir, xenl, + cols#80, lines#24, + bel=^G, cbt=\E[Z, clear=\E[H\E[2J, cr=^M, cub1=^H, cud1=\E[B, + cuf1=\E[C, cup=\E[%i%p1%d;%p2%dH, cuu1=\E[A, + dch1=\E[P$<40>, dl1=\E[M, ed=\E[J, el=\E[K, home=\E[H, ht=^I, + il1=\E[L, ind=^J, + is2=\E[7s\E[2;3;4;20;?5;?6l\E[12;?7h\E[1Q\E[0;1(D\E[8s, + kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A, + kf1=\E_A\E\\, kf2=\E_B\E\\, kf3=\E_C\E\\, kf4=\E_D\E\\, + kf5=\E_E\E\\, kf6=\E_F\E\\, kf7=\E_G\E\\, kf8=\E_H\E\\, + kf9=\E_I\E\\, khome=\E[H, ri=\EM, rmam=\E[?7l, rmir=\E[4l, + rmso=\E[m, rmul=\E[m, sgr0=\E[m, smam=\E[?7h, smir=\E[4h, + smso=\E[1m, smul=\E[4m, +# some of the vi300s have older firmware that has the command +# sequence for setting editing extent reversed. +vi300-old|visual 300 with old firmware (set edit extent reversed), + is2=\E[7s\E[2;3;4;20;?5;?6l\E[12;?7h\E[2Q\E[0;1(D\E[8s, + use=vi300, + +# Visual 500 prototype entry from University of Wisconsin. +# The best place to look for the escape sequences is page A1-1 of the +# Visual 500 manual. The initialization sequence given here may be +# overkill, but it does leave out some of the initializations which can +# be done with the menus in set-up mode. +# The :xp: line below is so that emacs can understand the padding requirements +# of this slow terminal. :xp: is 10 time the padding factor. +# (vi500: removed unknown :xp#4: termcap; +# also added empty <acsc> to suppress tic warning -- esr) +vi500|visual 500, + am, mir, msgr, + cols#80, it#8, lines#33, + acsc=, cbt=\Ez$<4/>, clear=\Ev$<6*/>, cr=^M, + csr=\E(%p1%{32}%+%c%p2%{32}%+%c, cub1=^H, cud1=\EB, + cuf1=\EC, cup=\EY%p1%{32}%+%c%p2%{32}%+%c, cuu1=\EA, + dch1=\EO$<3*/>, dl1=\EM$<3*/>, ed=\Ey$<3*/>, + el=\Ex$<16/>, home=\EH, ht=\011$<8/>, il1=\EL\Ex$<3*/>, + ind=^J, + is2=\E3\E\001\E\007\E\003\Ek\EG\Ed\EX\El\E>\Eb\E\\, + kbs=^H, kcub1=\ED, kcud1=\EB, kcuf1=\EC, kcuu1=\EA, + khome=\EH, nel=^M^J, rmacs=^O, rmir=\Ej, rmso=\E^G, + rmul=\E^C, smacs=^N, smir=\Ei, smso=\E^H, smul=\E^D, + +# The visual 550 is a visual 300 with tektronix graphics, +# and with 33 lines. clear screen is modified here to +# also clear the graphics. +vi550|visual 550 ansi x3.64, + lines#33, + clear=\030\E[H\E[2J, use=vi300, + +vi603|visual603|visual 603, + hs, mir, + bel=^G, blink=\E[5m, bold=\E[1m, clear=\E[H\E[J, + csr=\E[%i%p1%d;%p2%dr, cuf1=\E[C, + cup=\E[%i%p1%d;%p2%dH, cuu1=\E[A, dch1=\E[P, dl1=\E[M, + dsl=\EP2;1~\E\\, ed=\E[J, el=\E[K, fsl=\E\\, il1=\E[L, + ind=\ED, is1=\E>\E[?3l\E[?4l\E[?7h\E[?8h\E[1;24r, + rev=\E[7m, ri=\EM, rmir=\E[4l, rmso=\E[27m, rmul=\E[24m, + sgr0=\E[m, smir=\E[4h, smso=\E[7m, smul=\E[4m, tsl=\EP2~, + use=vt100, + +#### Wyse (wy) +# +# Wyse Technology +# 3471 North First Street +# San Jose, CA 95134 +# Vox: (408)-473-1200 +# Fax: (408) 473-1222 +# Web: http://www.wyse.com +# +# Wyse sales can be reached by phone at 1-800-GET-WYSE. Tech support is at +# (800)-800-WYSE (option 5 gets you a human). There's a Web page at the +# obvious address, <http://www.wyse.com>. They keep terminfo entries at +# <http://www.wyse.co.uk/support/appnotes/idxappnt.htm>. +# +# Wyse bought out Link Technology, Inc. in 1990 and closed it down in 1995. +# They now own the Qume and Amdek brands, too. So these are the people to +# talk with about all Link, Qume, and Amdek terminals. +# +# These entries include a few small fixes. +# I canceled the bel capacities in the vb entries. +# I made two trivial syntax fixes in the wyse30 entry. +# I made some entries relative to adm+sgr. +# +# +# Note: The wyse75, wyse85, and wyse99 have been discontinued. + +# Although the Wyse 30 can support more than one attribute +# it requires magic cookies to do so. Many applications do not +# function well with magic cookies. The following terminfo uses +# the protect mode to support one attribute (dim) without cookies. +# If more than one attribute is needed then the wy30-mc terminfo +# should be used. +# +wy30|wyse30|Wyse 30, + am, bw, hs, mc5i, mir, msgr, xon, + cols#80, lh#1, lines#24, lw#8, ma#1, nlab#8, wsl#45, + acsc=0wa_h[jukslrmqnxqzttuyv]wpxv, bel=^G, cbt=\EI, + civis=\E`0, clear=\E+$<80>, cnorm=\E`1, cr=^M, cub1=^H, + cud1=^J, cuf1=^L, cup=\E=%p1%{32}%+%c%p2%{32}%+%c, + cuu1=^K, dch1=\EW$<10>, dim=\E`7\E), dl1=\ER$<1>, + dsl=\EF\r, ed=\EY$<80>, el=\ET, flash=\E`8$<100/>\E`9, + fsl=^M, home=^^, ht=\011$<1>, hts=\E1, il1=\EE$<2>, + ind=\n$<2>, ip=$<2>, is2=\E'\E(\E\^3\E`9\016\024, + kHOM=\E{, kbs=^H, kcbt=\EI, kcub1=^H, kcud1=^J, kcuf1=^L, + kcuu1=^K, kdch1=\EW, kdl1=\ER, ked=\EY, kel=\ET, kent=\E7, + kf1=^A@\r, kf2=^AA\r, kf3=^AB\r, kf4=^AC\r, kf5=^AD\r, + kf6=^AE\r, kf7=^AF\r, kf8=^AG\r, khome=^^, kich1=\EQ, + kil1=\EE, knp=\EK, kpp=\EJ, krpl=\Er, ll=^^^K, mc0=\EP, mc4=^T, + mc5=^X, nel=^M^J, pfx=\Ez%p1%{63}%+%c%p2%s\177, + pln=\Ez%p1%{47}%+%c%p2%s\r, prot=\E`7\E), ri=\Ej$<3>, + rmacs=\EH^C, rmir=\Er, rmln=\EA11, rmso=\E(, + sgr=%?%p1%p5%p8%|%|%t\E`7\E)%e\E(%;%?%p9%t\EH\002%e\EH\003%;, + sgr0=\E(\EH\003, smacs=\EH^B, smir=\Eq, smln=\EA10, + smso=\E`7\E), tbc=\E0, tsl=\EF, +# +# This terminal description uses the non-hidden attribute mode +# (with magic cookie). +# +# (wy30-mc: added <smcup> to suppress tic warning --esr) +wy30-mc|wyse30-mc|wyse 30 with magic cookies, + msgr@, + ma@, xmc#1, + blink=\EG2, dim=\EGp, prot=\EG0\E), rmacs=\EG0\EH\003, + rmcup=\EG0, rmso=\EG0, + sgr=\EG%{48}%?%p2%p6%|%t%{8}%|%;%?%p1%p3%|%p6%|%t%{4}%|%;%?%p4%t%{2}%|%;%?%p1%p5%|%t%{64}%|%;%?%p7%t%{1}%|%;%c%?%p8%t\E)%e\E(%;%?%p9%t\EH\002%e\EH\003%;, + sgr0=\EG0\E(\EH\003, smacs=\EG0\EH\002, smcup=, + smso=\EG4, use=wy30, + use=adm+sgr, +# The mandatory pause used by <flash> does not work with +# older versions of terminfo. If you see this effect then +# unset xon and delete the / from the delay. +# i.e. change $<100/> to $<100> +wy30-vb|wyse30-vb|wyse 30 visible bell, + bel@, use=wy30, +# +# The Wyse 50 can support one attribute (e.g. Dim, Inverse, +# Normal) without magic cookies by using the protect mode. +# The following description uses this feature, but when more +# than one attribute is put on the screen at once, all attributes +# will be changed to be the same as the last attribute given. +# The Wyse 50 can support more attributes when used with magic +# cookies. The wy50-mc terminal description uses magic cookies +# to correctly handle multiple attributes on a screen. +# +wy50|wyse50|Wyse 50, + am, bw, hs, mc5i, mir, msgr, xon, + cols#80, lh#1, lines#24, lw#8, ma#1, nlab#8, wsl#45, + acsc=0wa_h[jukslrmqnxqzttuyv]wpxv, bel=^G, cbt=\EI, + civis=\E`0, clear=\E+$<20>, cnorm=\E`1, cr=^M, cub1=^H, + cud1=^J, cuf1=^L, cup=\E=%p1%{32}%+%c%p2%{32}%+%c, + cuu1=^K, dch1=\EW$<1>, dim=\E`7\E), dl1=\ER, dsl=\EF\r, + ed=\EY$<20>, el=\ET, flash=\E`8$<100/>\E`9, fsl=^M, + home=^^, ht=^I, hts=\E1, il1=\EE, ind=\n$<2>, ip=$<1>, + is1=\E`\:\E`9$<30>, is2=\016\024\E'\E(, kHOM=\E{, kbs=^H, + kcbt=\EI, kcub1=^H, kcud1=^J, kcuf1=^L, kcuu1=^K, kdch1=\EW, + kdl1=\ER, ked=\EY, kel=\ET, kent=\E7, kf1=^A@\r, kf10=^AI\r, + kf11=^AJ\r, kf12=^AK\r, kf13=^AL\r, kf14=^AM\r, kf15=^AN\r, + kf16=^AO\r, kf2=^AA\r, kf3=^AB\r, kf4=^AC\r, kf5=^AD\r, + kf6=^AE\r, kf7=^AF\r, kf8=^AG\r, kf9=^AH\r, khome=^^, + kich1=\EQ, kil1=\EE, knp=\EK, kpp=\EJ, kprt=\EP, krpl=\Er, + ll=^^^K, mc0=\EP, mc4=^T, mc5=^X, nel=^M^J, + pfx=\Ez%p1%{63}%+%c%p2%s\177, + pln=\Ez%p1%{47}%+%c%p2%s\r, prot=\E`7\E), rev=\E`6\E), + ri=\Ej, rmacs=\EH^C, rmir=\Er, rmln=\EA11, rmso=\E(, + sgr=%?%p1%p3%|%t\E`6\E)%e%p5%p8%|%t\E`7\E)%e\E(%;%?%p9%t\EH\002%e\EH\003%;, + sgr0=\E(\EH\003, smacs=\EH^B, smir=\Eq, smln=\EA10, + smso=\E`6\E), tbc=\E0, tsl=\EF, +# +# This terminal description uses the non-hidden attribute mode +# (with magic cookie). +# +# The mandatory pause used by flash does not work with some +# older versions of terminfo. If you see this effect then +# unset <xon> and delete the / from the delay. +# i.e. change $<100/> to $<100> +# (wy50-mc: added <smcup> to suppress tic warning --esr) +wy50-mc|wyse50-mc|wyse 50 with magic cookies, + msgr@, + ma@, xmc#1, + blink=\EG2, dim=\EGp, prot=\EG0\E), rev=\EG4, + rmacs=\EG0\EH\003, rmcup=\EG0, rmso=\EG0, + sgr=\EG%{48}%?%p2%p6%|%t%{8}%|%;%?%p1%p3%|%p6%|%t%{4}%|%;%?%p4%t%{2}%|%;%?%p1%p5%|%t%{64}%|%;%?%p7%t%{1}%|%;%c%?%p8%t\E)%e\E(%;%?%p9%t\EH\002%e\EH\003%;, + sgr0=\EG0\E(\EH\003, smacs=\EG0\EH\002, smcup=, + smso=\EGt, use=wy50, + use=adm+sgr, +wy50-vb|wyse50-vb|wyse 50 visible bell, + bel@, use=wy50, +wy50-w|wyse50-w|wyse 50 132-column, + cols#132, lw#7, nlab#16, wsl#97, + cup=\Ea%i%p1%dR%p2%dC, dch1=\EW$<2>, is1=\E`;\E`9$<30>, use=wy50, +wy50-wvb|wyse50-wvb|wyse 50 132-column visible bell, + bel@, + use=wy50-w, + +# +# The Wyse 350 is a Wyse 50 with color. +# Unfortunately this means that it has magic cookies. +# The color attributes are designed to overlap the reverse, dim and +# underline attributes. This is nice for monochrome applications +# because you can make underline stuff green (or any other color) +# but for true color applications it's not so hot because you cannot +# mix color with reverse, dim or underline. +# To further complicate things one of the attributes must be +# black (either the foreground or the background). In reverse video +# the background changes color with black letters. In normal video +# the foreground changes colors on a black background. +# This terminfo uses some of the more advanced features of curses +# to display both color and blink. In the final analysis I am not +# sure that the wy350 runs better with this terminfo than it does +# with the wy50 terminfo (with user adjusted colors). +# +# The mandatory pause used by flash does not work with +# older versions of terminfo. If you see this effect then +# unset xon and delete the / from the delay. +# i.e. change $<100/> to $<100> +# +# Bug: The <op> capability resets attributes. +wy350|wyse350|Wyse 350, + am, bw, hs, mc5i, mir, xon, + colors#8, cols#80, lh#1, lines#24, lw#8, ncv#55, nlab#8, pairs#8, + wsl#45, xmc#1, + acsc=0wa_h[jukslrmqnxqzttuyv]wpxv, bel=^G, blink=\EG2, + cbt=\EI, civis=\E`0, clear=\E+$<20>, cnorm=\E`1, cr=^M, + cub1=^H, cud1=^J, cuf1=^L, + cup=\E=%p1%{32}%+%c%p2%{32}%+%c, cuu1=^K, dch1=\EW$<1>, + dim=\EGp, dl1=\ER, dsl=\EF\r, ed=\EY$<20>, el=\ET, + flash=\E`8$<100/>\E`9, fsl=^M, home=^^, ht=^I, hts=\E1, + il1=\EE, ind=\n$<2>, ip=$<1>, is1=\E`\:\E`9$<30>, + is2=\016\024\E'\E(, is3=\E%?, kHOM=\E{, kbs=^H, kcbt=\EI, + kcub1=^H, kcud1=^J, kcuf1=^L, kcuu1=^K, kdch1=\EW, kdl1=\ER, + ked=\EY, kel=\ET, kent=\E7, kf1=^A@\r, kf10=^AI\r, + kf11=^AJ\r, kf12=^AK\r, kf13=^AL\r, kf14=^AM\r, kf15=^AN\r, + kf16=^AO\r, kf2=^AA\r, kf3=^AB\r, kf4=^AC\r, kf5=^AD\r, + kf6=^AE\r, kf7=^AF\r, kf8=^AG\r, kf9=^AH\r, khome=^^, + kich1=\EQ, kil1=\EE, knp=\EK, kpp=\EJ, kprt=\EP, krpl=\Er, + ll=^^^K, mc0=\EP, mc4=^T, mc5=^X, nel=^M^J, oc=\E%?, op=\EG0, + pfx=\Ez%p1%{63}%+%c%p2%s\177, + pln=\Ez%p1%{47}%+%c%p2%s\r, prot=\EG0\E), ri=\Ej, + rmacs=\EG0\EH\003, rmir=\Er, rmln=\EA11, setb=, + setf=%?%p1%{0}%=%t%{76}%e%p1%{1}%=%t%{64}%e%p1%{2}%=%t%{8}%e%p1%{3}%=%t%{72}%e%p1%{4}%=%t%{4}%e%p1%{5}%=%t%{68}%e%p1%{6}%=%t%{12}%e%p1%{7}%=%t%{0}%;%PC\EG%gC%gA%+%{48}%+%c, + sgr=%{0}%?%p4%t%{2}%|%;%?%p7%t%{1}%|%;%PA\EG%?%gC%t%gC%e%{0}%?%p1%t%{4}%|%;%?%p2%t%{8}%|%;%?%p3%t%{4}%|%;%?%p5%t%{64}%|%;%;%gA%+%{48}%+%c%?%p8%t\E)%e\E(%;%?%p9%t\EH\002%e\EH\003%;, + sgr0=\EG0\E(\EH\003%{0}%PA%{0}%PC, smacs=\EG0\EH\002, + smir=\Eq, smln=\EA10, tbc=\E0, tsl=\EF, + use=adm+sgr, +wy350-vb|wyse350-vb|wyse 350 visible bell, + bel@, use=wy350, +wy350-w|wyse350-w|wyse 350 132-column, + cols#132, lw#7, nlab#16, wsl#97, + cup=\Ea%i%p1%dR%p2%dC, dch1=\EW$<2>, is1=\E`;\E`9$<30>, use=wy350, +wy350-wvb|wyse350-wvb|wyse 350 132-column visible bell, + bel@, + use=wy350-w, +# +# This terminfo description is untested. +# The wyse100 emulates an adm31, so the adm31 entry should work. +# +wy100|wyse 100, + hs, mir, + cols#80, lines#24, xmc#1, + bel=^G, clear=\E;, cr=^M, cub1=^H, cud1=^J, cuf1=^L, + cup=\E=%p1%{32}%+%c%p2%{32}%+%c, cuu1=^K, dch1=\EW, + dl1=\ER, dsl=\EA31, ed=\EY, el=\ET, fsl=^M, il1=\EE, ind=^J, + invis@, is2=\Eu\E0, kbs=^H, kcub1=^H, kcud1=^J, kcuf1=^L, + kcuu1=^K, kf1=^A@\r, kf2=^AA\r, kf3=^AB\r, kf4=^AC\r, + kf5=^AD\r, kf6=^AE\r, kf7=^AF\r, kf8=^AG\r, khome=\E{, + rmir=\Er, smir=\Eq, tsl=\EF, + use=adm+sgr, +# +# The Wyse 120/150 has most of the features of the Wyse 60. +# This terminal does not need padding up to 9600 baud! +# <msgr> should be set but the clear screen fails when in +# alt-charset mode. Try \EcE\s\s\E+\s if the screen is really clear +# then set <msgr>. +# +wy120|wyse120|wy150|wyse150|Wyse 120/150, + am, bw, hs, km, mc5i, mir, msgr, xon, + cols#80, it#8, lh#1, lines#24, lw#8, nlab#8, pb#9601, wsl#45, + acsc=+/\,.0[Iha2fxgqh1jYk?lZm@nEqDtCu4vAwBx3yszr{c~~, + bel=^G, blink=\EG2, cbt=\EI, civis=\E`0, clear=\E+$<50>, + cnorm=\E`1, cr=^M, cub1=^H, cud1=^J, cuf1=^L, + cup=\E=%p1%{32}%+%c%p2%{32}%+%c, cuu1=^K, dch1=\EW$<7>, + dim=\EGp, dl1=\ER$<3>, dsl=\EF\r, ed=\EY$<50>, el=\ET$<4>, + flash=\E`8$<100/>\E`9, fsl=^M, home=^^, ht=\011$<1>, + hts=\E1, il1=\EE$<3>, ind=\n$<3>, ip=$<2>, is1=\EcB0\EcC1, + is2=\Ed$\EcD\E'\Er\EH\003\Ed/\EO\Ee1\Ed*\E`@\E`9\E`1\016\024\El, + is3=\EwJ\Ew1$<150>, kHOM=\E{, kbs=^H, kcbt=\EI, kcub1=^H, + kcud1=^J, kcuf1=^L, kcuu1=^K, kdch1=\EW, kdl1=\ER, ked=\EY, + kel=\ET, kent=\E7, kf1=^A@\r, kf10=^AI\r, kf11=^AJ\r, + kf12=^AK\r, kf13=^AL\r, kf14=^AM\r, kf15=^AN\r, kf16=^AO\r, + kf2=^AA\r, kf3=^AB\r, kf4=^AC\r, kf5=^AD\r, kf6=^AE\r, + kf7=^AF\r, kf8=^AG\r, kf9=^AH\r, khome=^^, kich1=\EQ, + kil1=\EE, knp=\EK, kpp=\EJ, kprt=\EP, krpl=\Er, ll=^^^K, + mc0=\EP, mc4=^T, mc5=\Ed#, nel=\r\n$<3>, + pfloc=\EZ2%p1%{63}%+%c%p2%s\177, + pfx=\EZ1%p1%{63}%+%c%p2%s\177, + pln=\Ez%p1%{47}%+%c%p2%s\r, prot=\E), ri=\Ej$<2>, + rmacs=\EcD, rmam=\Ed., rmcup=\Ew1, rmir=\Er, rmln=\EA11, + rmxon=\Ec20, rs1=\E~!\E~4$<30>, rs2=\EeF\E`\:$<70>, + rs3=\EwG\Ee($<100>, + sgr=%?%p8%t\E)%e\E(%;%?%p9%t\EcE%e\EcD%;\EG%{48}%?%p2%t%{8}%|%;%?%p1%p3%|%p6%|%t%{4}%|%;%?%p4%t%{2}%|%;%?%p1%p5%|%t%{64}%|%;%?%p7%t%{1}%|%;%c, + sgr0=\E(\EH\003\EG0\EcD, smacs=\EcE, smam=\Ed/, + smcup=\Ew0, smir=\Eq, smln=\EA10, smso=\EGt, smxon=\Ec21, + tbc=\E0, tsl=\EF, + use=adm+sgr, +# +wy120-w|wyse120-w|wy150-w|wyse150-w|wyse 120/150 132-column, + cols#132, lw#7, nlab#16, wsl#97, + cup=\Ea%i%p1%dR%p2%dC, dch1=\EW$<12>, ip=$<4>, + rs2=\E`;$<70>, use=wy120, +# +wy120-25|wyse120-25|wy150-25|wyse150-25|wyse 120/150 80-column 25-lines, + lh@, lines#25, lw@, nlab@, + pln@, rs3=\EwG\Ee)$<100>, use=wy120, +# +wy120-25-w|wyse120-25-w|wy150-25-w|wyse150-25-w|wyse 120/150 132-column 25-lines, + lh@, lines#25, lw@, nlab@, + pln@, rs3=\EwG\Ee)$<100>, use=wy120-w, +# +wy120-vb|wyse120-vb|wy150-vb|wyse150-vb|Wyse 120/150 visible bell, + bel@, + use=wy120, +# +wy120-w-vb|wy120-wvb|wyse120-wvb|wy150-w-vb|wyse150-w-vb|Wyse 120/150 132-column visible bell, + bel@, + use=wy120-w, +# +# The Wyse 60 is like the Wyse 50 but with more padding. +# The reset strings are slow and the pad times very depending +# on other parameters such as font loading. I have tried +# to follow the following outline: +# +# <rs1> -> set personality +# <rs2> -> set number of columns +# <rs3> -> set number of lines +# <is1> -> select the proper font +# <is2> -> do the initialization +# <is3> -> set up display memory (2 pages) +# +# The Wyse 60's that have vt100 emulation are slower than the +# older Wyse 60's. This change happened mid-1987. +# The capabilities effected are <dch1> <dl1> <il1> <ind> <ri> +# +# The meta key is only half right. This terminal will return the +# high order bit set when you hit CTRL-function_key +# +# It may be useful to assign two function keys with the +# values \E=(\s look at old data in page 1 +# \E=W, look at bottom of page 1 +# where \s is a space ( ). +# +# Note: +# The Wyse 60 runs faster when the XON/XOFF +# handshake is turned off. +# +# (wy60: we use \E{ rather than ^^ for home (both are documented) to avoid +# a bug reported by Robert Dunn, <rcdii@inlink.com> -- esr) +wy60|wyse60|Wyse 60, + am, bw, hs, km, mc5i, mir, msgr, + cols#80, lh#1, lines#24, lw#8, nlab#8, wsl#45, + acsc=+/\,.0[Iha2fxgqh1jYk?lZm@nEqDtCu4vAwBx3yszr{c~~, + bel=^G, blink=\EG2, cbt=\EI, civis=\E`0, clear=\E+$<100>, + cnorm=\E`1, cr=^M, cub1=^H, cud1=^J, cuf1=^L, + cup=\E=%p1%{32}%+%c%p2%{32}%+%c, cuu1=^K, + dch1=\EW$<11>, dclk=\E`b, dim=\EGp, dl1=\ER$<5>, dsl=\EF\r, + ed=\EY$<100>, el=\ET, flash=\E`8$<100/>\E`9, fsl=^M, + home=\E{, ht=\011$<1>, hts=\E1, il1=\EE$<4>, ind=\n$<5>, + ip=$<3>, is1=\EcB0\EcC1, + is2=\Ed$\EcD\E'\Er\EH\003\Ed/\EO\Ee1\Ed*\E`@\E`9\E`1\016\024\El, + is3=\EwJ\Ew1$<150>, kHOM=\E{, kbs=^H, kcbt=\EI, kcub1=^H, + kcud1=^J, kcuf1=^L, kcuu1=^K, kdch1=\EW, kdl1=\ER, ked=\EY, + kel=\ET, kent=\E7, kf1=^A@\r, kf10=^AI\r, kf11=^AJ\r, + kf12=^AK\r, kf13=^AL\r, kf14=^AM\r, kf15=^AN\r, kf16=^AO\r, + kf2=^AA\r, kf3=^AB\r, kf4=^AC\r, kf5=^AD\r, kf6=^AE\r, + kf7=^AF\r, kf8=^AG\r, kf9=^AH\r, khome=^^, kich1=\EQ, + kil1=\EE, knp=\EK, kpp=\EJ, kprt=\EP, krpl=\Er, ll=\E{^K, + mc0=\EP, mc4=^T, mc5=\Ed#, nel=\r\n$<3>, + pfloc=\EZ2%p1%{63}%+%c%p2%s\177, + pfx=\EZ1%p1%{63}%+%c%p2%s\177, + pln=\Ez%p1%{47}%+%c%p2%s\r, prot=\E), ri=\Ej$<7>, + rmacs=\EcD, rmam=\Ed., rmclk=\E`c, rmcup=\Ew1, rmir=\Er, + rmln=\EA11, rmxon=\Ec20, rs1=\E~!\E~4$<150>, + rs2=\EeG$<150>, rs3=\EwG\Ee($<200>, + sgr=%?%p8%t\E)%e\E(%;%?%p9%t\EcE%e\EcD%;\EG%{48}%?%p2%t%{8}%|%;%?%p1%p3%|%p6%|%t%{4}%|%;%?%p4%t%{2}%|%;%?%p1%p5%|%t%{64}%|%;%?%p7%t%{1}%|%;%c, + sgr0=\E(\EH\003\EG0\EcD, smacs=\EcE, smam=\Ed/, + smcup=\Ew0, smir=\Eq, smln=\EA10, smso=\EGt, smxon=\Ec21, + tbc=\E0, tsl=\EF, + use=adm+sgr, +# +wy60-w|wyse60-w|wyse 60 132-column, + cols#132, lw#7, nlab#16, wsl#97, + cup=\Ea%i%p1%dR%p2%dC, dch1=\EW$<16>, ip=$<5>, + rs2=\EeF$<150>\E`;$<150>, use=wy60, +# +wy60-25|wyse60-25|wyse 60 80-column 25-lines, + lh@, lines#25, lw@, nlab@, + pln@, rs3=\EwG\Ee)$<200>, use=wy60, +wy60-25-w|wyse60-25-w|wyse 60 132-column 25-lines, + lh@, lines#25, lw@, nlab@, + pln@, rs3=\EwG\Ee)$<200>, use=wy60-w, +# +wy60-42|wyse60-42|wyse 60 80-column 42-lines, + lines#42, + clear=\E+$<260>, cup=\E=%p1%{32}%+%c%p2%{32}%+%c$<2>, + dch1=\EW$<16>, dl1=\ER$<11>, ed=\Ey$<260>, il1=\EE$<11>, + ind=\n$<9>, ip=$<5>, is1=\EcB2\EcC3, nel=\r\n$<6>, + ri=\Ej$<10>, rs3=\Ee*$<150>, + use=wy60, +wy60-42-w|wyse60-42-w|wyse 60 132-column 42-lines, + cols#132, lw#7, nlab#16, wsl#97, + clear=\E+$<260>, cup=\Ea%i%p1%dR%p2%dC$<2>, + dch1=\EW$<19>, ed=\Ey$<260>, home=\036$<2>, ip=$<6>, + nel=\r\n$<11>, rs2=\EeF$<150>\E`;$<150>, + use=wy60-42, +# +wy60-43|wyse60-43|wyse 60 80-column 43-lines, + lh@, lines#43, lw@, nlab@, + pln@, rs3=\Ee+$<150>, use=wy60-42, +wy60-43-w|wyse60-43-w|wyse 60 132-column 43-lines, + lh@, lines#43, lw@, nlab@, + pln@, rs3=\Ee+$<150>, use=wy60-42-w, +# +wy60-vb|wyse60-vb|Wyse 60 visible bell, + bel@, use=wy60, +wy60-w-vb|wy60-wvb|wyse60-wvb|Wyse 60 132-column visible bell, + bel@, + use=wy60-w, + +# The Wyse-99GT looks at lot like the Wyse 60 except that it +# does not have the 42/43 line mode. In the Wyse-60 the "lines" +# setup parameter controls the number of lines on the screen. +# For the Wyse 99GT the "lines" setup parameter controls the +# number of lines in a page. The screen can display 25 lines max. +# The Wyse-99GT also has personalities for the VT220 and +# Tektronix 4014. But this has no bearing on the native mode. +# +# (msgr) should be set but the clear screen fails when in +# alt-charset mode. Try \EcE\s\s\E+\s if the screen is really clear +# then set msgr, else use msgr@. +# +# u0 -> enter Tektronix mode +# u1 -> exit Tektronix mode +# +wy99gt|wyse99gt|Wyse 99gt, + msgr@, + clear=\E+$<130>, dch1=\EW$<7>, dl1=\ER$<4>, ed=\Ey$<130>, + el=\Et$<5>, flash=\E`8$<100/>\E`9, ht=\011$<1>, + il1=\EE$<4>, ind=\n$<4>, ip=$<2>, is3=\Ew0$<20>, nel@, + ri=\Ej$<3>, rmcup=\Ew0, rs2=\E`\:$<150>, smcup=\Ew1, + u0=\E~>\E8, u1=\E[42h, + use=wy60, +# +wy99gt-w|wyse99gt-w|wyse 99gt 132-column, + cols#132, lw#7, nlab#16, wsl#97, + clear=\E+$<160>, cup=\Ea%i%p1%dR%p2%dC$<2>, + dch1=\EW$<9>, ed=\Ey$<160>, ip=$<4>, rs2=\E`;$<150>, use=wy99gt, +# +wy99gt-25|wyse99gt-25|wyse 99gt 80-column 25-lines, + lh@, lines#25, lw@, nlab@, + pln@, rs2=\E`\:$<150>, rs3=\EwG\Ee)$<200>, use=wy99gt, +# +wy99gt-25-w|wyse99gt-25-w|wyse 99gt 132-column 25-lines, + lh@, lines#25, lw@, nlab@, + pln@, rs2=\E`;$<150>, use=wy99gt-w, +# +wy99gt-vb|wyse99gt-vb|Wyse 99gt visible bell, + bel@, use=wy99gt, +# +wy99gt-w-vb|wy99gt-wvb|wyse99gt-wvb|Wyse 99gt 132-column visible bell, + bel@, + use=wy99gt-w, + +# Can't set tabs! Other bugs (ANSI mode only): +# - can't redefine function keys (anyway, key redefinition in ANSI mode +# is too much complex to be described); +# - meta key can't be described (the terminal forgets it when reset); +# The xon-xoff handshaking can't be disabled while in ansi personality, so +# emacs can't work at speed greater than 9600 baud. No padding is needed at +# this speed. +# dch1 has been commented out because it causes annoying glittering when +# vi deletes one character at the beginning of a line with tabs in it. +# dch makes sysgen(1M) have a horrible behaviour when deleting +# a screen and makes screen(1) behave badly, so it is disabled too. The nice +# thing is that vi goes crazy if smir-rmir are present and both dch-dch1 are +# not, so smir and rmir are commented out as well. +# From: Francesco Potorti` <F.Potorti@cnuce.cnr.it>, 24 Aug 1998 +wy99-ansi|Wyse WY-99GT in ansi mode (int'l PC keyboard), + am, km, mc5i, mir, msgr, xenl, + cols#80, it#8, lines#25, vt#3, + acsc=``aaffggjjkkllmmnnooqqssttuuvvwwxx{{||}}~~, + bel=^G, blink=\E[5m, bold=\E[1m, cbt=\E[Z, civis=\E[?25l, + clear=\E[H\E[J$<200>, cnorm=\E[34h\E[?25h, cr=^M, + csr=\E[%i%p1%d;%p2%dr, cub=\E[%p1%dD$<1>, + cub1=\010$<1>, cud=\E[%p1%dB, cud1=\ED, + cuf=\E[%p1%dC$<1>, cuf1=\E[C$<1>, + cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA, cuu1=\EM, + cvvis=\E[34l\E[?25h, dim=\E[2m, dl=\E[%p1%dM, dl1=\E[M, + ech=\E[%p1%dX, ed=\E[J$<8*>, el=\E[K$<1>, el1=\E[1K$<1>, + enacs=\E)0, flash=\E[?5h$<30/>\E[?5l, home=\E[H, + hpa=\E[%i%p1%dG, ht=^I, ich=\E[%p1%d@, il=\E[%p1%dL, + il1=\E[L, ind=\n$<1>, invis=\E[8m, + is2=\E7\E[1r\E8\E[2;3;4;13;20;34;39;36l\E[12;16;34h\E[?1;3;4;5;10;18l\E[?7;8;25h\E>\E[?5W\E(B\017\E[4i, + kbs=^H, kcbt=\E[z, kcub1=\EOD, kcud1=\EOB, kcuf1=\EOC, + kcuu1=\EOA, kf1=\EOP, kf10=\E[21~, kf11=\E[23~, + kf12=\E[24~, kf17=\E[K, kf18=\E[31~, kf19=\E[32~, kf2=\EOQ, + kf20=\E[33~, kf21=\E[34~, kf22=\E[35~, kf23=\E[1~, + kf24=\E[2~, kf3=\EOR, kf4=\EOS, kf5=\E[M, kf6=\E[17~, + kf7=\E[18~, kf8=\E[19~, kf9=\E[20~, ll=\E[24E, mc0=\E[?19h, + mc4=\E[4i, mc5=\E[5i, nel=\EE, prot=\E[1"q, rc=\E8, + rev=\E[7m, ri=\EM, rmacs=^O, rmam=\E[?7l, rmir=\E[4l, + rmkx=\E[?1l, rmso=\E[27m, rmul=\E[24m, + rs2=\E[61"p\E[40h\E[?6l\E[1r\E[2;3;4;13;20;34;39;36l\E[12;16;34h\E[?1;3;4;5;10;18l\E[?7;8;25h\E>\E[?5W\E(B\017\E[24E\E[4i, + sc=\E7, + sgr=\E[0%?%p6%t;1%;%?%p2%t;4%;%?%p1%p3%O%t;7%;%?%p4%t;5%;%?%p5%t;2%;%?%p7%t;8%;m\E[%?%p8%t1%;"q%?%p9%t\016%e\017%;, + sgr0=\E[m\017\E["q, smacs=^N, smam=\E[?7h, smir=\E[4h, + smkx=\E[?1h, smso=\E[7m, smul=\E[4m, vpa=\E[%i%p1%dd, + +# This is the american terminal. Here tabs work fine. +# From: Francesco Potorti` <F.Potorti@cnuce.cnr.it>, 24 Aug 1998 +wy99a-ansi|Wyse WY-99GT in ansi mode (US PC keyboard), + hts=\EH, is3=\E[?5l, rs3=\E[?5l, tbc=\E[3g, + use=wy99-ansi, + +# This terminal (firmware version 02) has a lot of bugs: +# - can't set tabs; +# - other bugs in ANSI modes (see above). +# This description disables handshaking when using cup. This is because +# GNU emacs doesn't like Xon-Xoff handshaking. This means the terminal +# cannot be used at speeds greater than 9600 baud, because at greater +# speeds handshaking is needed even for character sending. If you use +# DTR handshaking, you can use even greater speeds. +# From: Francesco Potorti` <F.Potorti@cnuce.cnr.it>, 24 Aug 1998 +wy99f|wy99fgt|wy-99fgt|Wyse WY-99GT (int'l PC keyboard), + am, bw, hs, km, mc5i, mir, msgr, xon, + cols#80, it#8, lines#25, wsl#46, + acsc='x+y.wI~_vj(k'l&m%n)o9q*s8t-u.v\,w+x=, bel=^G, + blink=\EG2, cbt=\EI, civis=\E`0, clear=\E'\E(\032, + cnorm=\E`4\E`1, cr=^M, cub1=^H, cud1=\Ej, cuf1=^L, + cup=\E=%p1%{32}%+%c%p2%{32}%+%c, cuu1=^K, + cvvis=\E`2\E`1, dch1=\EW, dim=\EGp, dl1=\ER, dsl=\EF\r, + ed=\EY$<8*>, el=\ET$<8>, enacs=\Ec@1J$<2000>, + flash=\E\^1$<30/>\E\^0, fsl=^M, home=^^, ht=^I, il1=\EE, + ind=^J, invis=\EG3, + is2=\Eu\Ee6\EC\EDF\Ec21\Ec31\Ec62\Ec72\Ee;\016\E'\EeL\E`9\E\^0\E`1\E`4\Ee.\E`\:\Ee1\EG0\E(\Ed/\Ee4\Ed*\EO\E`I\Er\Ee"\EcD\024, + ka1=^^, ka3=\EJ, kbs=^H, kc1=\ET, kc3=\EK, kcbt=\EI, kcub1=^H, + kcud1=^J, kcuf1=^L, kcuu1=^K, kf1=^A@\r, kf10=^AI\r, + kf11=^AJ\r, kf12=^AK\r, kf13=^A`\r, kf14=^Aa\r, kf15=^Ab\r, + kf16=^Ac\r, kf17=^Ad\r, kf18=^Ae\r, kf19=^Af\r, kf2=^AA\r, + kf20=^Ag\r, kf21=^Ah\r, kf22=^Ai\r, kf23=^Aj\r, kf24=^Ak\r, + kf3=^AB\r, kf4=^AC\r, kf5=^AD\r, kf6=^AE\r, kf7=^AF\r, + kf8=^AG\r, kf9=^AH\r, kprt=\EP, mc0=\EP, mc4=^T, mc5=\Ed#, + nel=^_, prot=\E), rev=\EG4, ri=\Ej, rmacs=\EcD, rmam=\Ed., + rmcup=\Ec21\Ec31, rmir=\Er, rmso=\EG0, rmxon=\Ec20\Ec30, + rs2=\Eu\E~4\Ee6\EC\EDF\Ec21\Ec31\Ec62\Ec72\Ee;\016\E'\EeL\E`9\E\^0\E`1\E`4\Ee.\E`\:\Ee)\Ew\EwG\Ew0\Ee1\EG0\E(\Ed/\Ee4\Ed*\EO\E`I\Er\Ee"\Ec@0B\EcD\024, + sgr=\E(\EG%{48}%?%p1%p3%O%t%{4}%+%;%?%p2%t%{8}%+%;%?%p4%t%{2}%+%;%?%p5%t%{64}%+%;%?%p7%t%{1}%+%;%c%?%p8%t\E)%;%?%p9%t\EcE%e\EcD%;, + sgr0=\E(\EG0, smacs=\EcE, smam=\Ed/, smcup=\Ec20\Ec30, + smir=\Eq, smso=\EG4, smxon=\Ec21\Ec31, tsl=\EF, + +# This is the american terminal. Here tabs work. +# From: Francesco Potorti` <F.Potorti@cnuce.cnr.it>, 24 Aug 1998 +wy99fa|wy99fgta|wy-99fgta|Wyse WY-99GT (US PC keyboard), + hts=\E1, tbc=\E0, + use=wy99f, + +# +# The Wyse 160 is combination of the WY-60 and the WY-99gt. +# The reset strings are slow and the pad times very depending +# on other parameters such as font loading. I have tried +# to follow the following outline: +# +# <rs1> -> set personality +# <rs2> -> set number of columns +# <rs3> -> set number of lines +# <is1> -> select the proper font +# <is2> -> do the initialization +# <is3> -> set up display memory (2 pages) +# +# The display memory may be used for either text or graphics. +# When "Display Memory = Shared" the terminal will have more pages +# but garbage may be left on the screen when you switch from +# graphics to text. If "Display Memory = Unshared" then the +# text area will be only one page long. +# +# (wy160: we use \E{ rather than ^^ for home (both are documented) to avoid +# a bug reported by Robert Dunn, <rcdii@inlink.com> -- esr) +wy160|wyse160|Wyse 160, + am, bw, hs, km, mc5i, mir, msgr, + cols#80, lh#1, lines#24, lw#8, nlab#8, wsl#38, + acsc=+/\,.0[Iha2fxgqh1jYk?lZm@nEqDtCu4vAwBx3yszr{c~~, + bel=^G, blink=\EG2, cbt=\EI, civis=\E`0, clear=\E+$<30>, + cnorm=\E`1, cr=^M, cub1=^H, cud1=^J, cuf1=^L, + cup=\E=%p1%{32}%+%c%p2%{32}%+%c, cuu1=^K, dch1=\EW$<5>, + dclk=\E`b, dim=\EGp, dl1=\ER$<1>, dsl=\EF\r, ed=\EY$<30>, + el=\ET$<5>, flash=\E`8$<100/>\E`9, fsl=^M, home=\E{, ht=^I, + hts=\E1, il1=\EE$<1>, ind=\n$<1>, ip=$<2>, is1=\EcB0\EcC1, + is2=\Ed$\EcD\E'\Er\EH\003\Ed/\EO\Ee1\Ed*\E`@\E`9\E`1\016\024\El, + is3=\Ew0$<100>, kHOM=\E{, kbs=^H, kcbt=\EI, kcub1=^H, + kcud1=^J, kcuf1=^L, kcuu1=^K, kdch1=\EW, kdl1=\ER, ked=\EY, + kel=\ET, kent=\E7, kf1=^A@\r, kf10=^AI\r, kf11=^AJ\r, + kf12=^AK\r, kf13=^AL\r, kf14=^AM\r, kf15=^AN\r, kf16=^AO\r, + kf2=^AA\r, kf3=^AB\r, kf4=^AC\r, kf5=^AD\r, kf6=^AE\r, + kf7=^AF\r, kf8=^AG\r, kf9=^AH\r, khome=^^, kich1=\EQ, + kil1=\EE, knp=\EK, kpp=\EJ, kprt=\EP, krpl=\Er, ll=\E{^K, + mc0=\EP, mc4=^T, mc5=\Ed#, nel=\r\n$<1>, + pfloc=\EZ2%p1%{63}%+%c%p2%s\177, + pfx=\EZ1%p1%{63}%+%c%p2%s\177, + pln=\Ez%p1%{47}%+%c%p2%s\r, prot=\E), ri=\Ej$<1>, + rmacs=\EcD, rmam=\Ed., rmclk=\E`c, rmcup=\Ew0, rmir=\Er, + rmln=\EA11, rmxon=\Ec20, rs1=\E~!\E~4$<70>, + rs2=\E`\:$<100>, rs3=\EwG\Ee($<140>, + sgr=%?%p8%t\E)%e\E(%;%?%p9%t\EcE%e\EcD%;\EG%{48}%?%p2%t%{8}%|%;%?%p1%p3%|%p6%|%t%{4}%|%;%?%p4%t%{2}%|%;%?%p1%p5%|%t%{64}%|%;%?%p7%t%{1}%|%;%c, + sgr0=\E(\EH\003\EG0\EcD, smacs=\EcE, smam=\Ed/, + smcup=\Ew1, smir=\Eq, smln=\EA10, smso=\EGt, smxon=\Ec21, + tbc=\E0, tsl=\EF, + use=adm+sgr, +# +wy160-w|wyse160-w|wyse 160 132-column, + cols#132, lw#7, nlab#16, wsl#90, + cup=\Ea%i%p1%dR%p2%dC, dch1=\EW$<9>, + rs2=\EeF$<150>\E`;$<150>, use=wy160, +# +wy160-25|wyse160-25|wyse 160 80-column 25-lines, + lh@, lines#25, lw@, nlab@, + pln@, rs3=\EwG\Ee)$<200>, use=wy160, +wy160-25-w|wyse160-25-w|wyse 160 132-column 25-lines, + lh@, lines#25, lw@, nlab@, + pln@, rs3=\EwG\Ee)$<200>, use=wy160-w, +# +wy160-42|wyse160-42|wyse 160 80-column 42-lines, + lines#42, + clear=\E+$<50>, dl1=\ER$<2>, ed=\Ey$<50>, il1=\EE$<2>, + ind=\n$<2>, is1=\EcB2\EcC3, nel=\r\n$<2>, ri=\Ej$<2>, + rs3=\Ee*$<150>, + use=wy160, +wy160-42-w|wyse160-42-w|wyse 160 132-column 42-lines, + cols#132, lw#7, nlab#16, wsl#90, + cup=\Ea%i%p1%dR%p2%dC, dch1=\EW$<8>, ip=$<3>, + rs2=\EeF$<150>\E`;$<150>, + use=wy160-42, +# +wy160-43|wyse160-43|wyse 160 80-column 43-lines, + lh@, lines#43, lw@, nlab@, + pln@, rs3=\Ee+$<150>, use=wy160-42, +wy160-43-w|wyse160-43-w|wyse 160 132-column 43-lines, + lh@, lines#43, lw@, nlab@, + pln@, rs3=\Ee+$<150>, use=wy160-42-w, +# +wy160-vb|wyse160-vb|Wyse 160 visible bell, + bel@, use=wy160, +wy160-w-vb|wy160-wvb|wyse160-wvb|Wyse 160 132-column visible bell, + bel@, + use=wy160-w, +# +# The Wyse 75 is a vt100 lookalike without advanced video. +# +# The Wyse 75 can support one attribute (e.g. Dim, Inverse, +# Underline) without magic cookies. The following description +# uses this capability, but when more than one attribute is +# put on the screen at once, all attributes will be changed +# to be the same as the last attribute given. +# The Wyse 75 can support more attributes when used with magic +# cookies. The wy75-mc terminal description uses magic cookies +# to correctly handle multiple attributes on a screen. +# +wy75|wyse75|wyse 75, + am, hs, mc5i, mir, msgr, xenl, xon, + cols#80, lines#24, ma#1, pb#1201, wsl#78, + acsc=``aaffggjjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~, + bel=^G, cbt=\E[Z, civis=\E[?25l, clear=\E[H\E[J$<30>, + cnorm=\E[?25h, cr=^M, csr=\E[%i%p1%d;%p2%dr$<2>, + cub=\E[%p1%dD, cub1=^H, cud=\E[%p1%dB, cud1=^J, + cuf=\E[%p1%dC, cuf1=\E[C, cup=\E[%i%p1%d;%p2%dH, + cuu=\E[%p1%dA, cuu1=\E[A, dch=\E[%p1%dP$<3*>, + dch1=\E[P$<3>, dim=\E[0t\E[2m, dl=\E[%p1%dM$<1*>, + dl1=\E[M, dsl=\E[>\,\001\001\E[>-\001\001, + ech=\E[%p1%dX, ed=\E[J$<30>, el=\E[K$<3>, el1=\E[1K$<3>, + enacs=\E)0, flash=\E[30h\E\,\E[30l$<250>, fsl=^A, + home=\E[H, hpa=\E[%i%p1%dG, ht=^I, hts=\EH, + ich=\E[%p1%d@$<1*>, il=\E[%p1%dL$<2*>, il1=\E[L$<2>, + ind=\n$<2>, ip=$<1>, + is1=\E[2;4;20;30l\E[?1;10l\E[12h\E[?7;8;25h, + is2=\E>\E(B\E)0\017, is3=\E[m, ka1=\EOw, ka3=\EOy, + kb2=\EOu, kbs=^H, kc1=\EOq, kc3=\EOs, kcub1=\E[D, kcud1=\E[B, + kcuf1=\E[C, kcuu1=\E[A, kdl1=\E[M, kel=\E[K, kent=\EOM, + kf1=\E[?5i, kf10=\E[21~, kf11=\E[23~, kf12=\E[24~, + kf13=\E[25~, kf14=\E[26~, kf15=\E[28~, kf16=\E[29~, + kf17=\E[31~, kf18=\E[32~, kf19=\E[33~, kf2=\E[?3i, + kf20=\E[34~, kf21=\E[35~, kf3=\E[2i, kf4=\E[@, kf5=\E[M, + kf6=\E[17~, kf7=\E[18~, kf8=\E[19~, kf9=\E[20~, kfnd=\E[1~, + khlp=\E[28~, khome=\E[H, kich1=\E[@, kil1=\E[L, knp=\E[6~, + kpp=\E[5~, kprt=\E[?5i, kslt=\E[4~, mc0=\E[0i, mc4=\E[4i, + mc5=\E[5i, rc=\E8, rev=\E[1t\E[7m, ri=\EM$<2>, rmacs=^O, + rmam=\E[?7l, rmir=\E[4l, rmkx=\E>, rmso=\E[m, rmul=\E[m, + rs1=\E[13l\E[3l\E!p, rs2=\E[35h\E[?3l$<80>, rs3=\E[?5l, + sc=\E7, + sgr=%?%p5%t\E[0t%;%?%p3%p1%|%t\E[1t%;%?%p2%t\E[2t%;%?%p4%t\E[3t%;%?%p1%p2%p3%p4%p5%|%|%|%|%t\E[7m%e\E[m%;%?%p9%t\016%e\017%;, + sgr0=\E[m\017, smacs=^N, smam=\E[?7h, smir=\E[4h, + smkx=\E[?1l\E[?7h\E=, smso=\E[1t\E[7m, smul=\E[2t\E[4m, + tbc=\E[3g, tsl=\E[>\,\001, +# +# This terminal description uses the non-hidden attribute mode +# (with magic cookie). +# +wy75-mc|wyse75-mc|wyse 75 with magic cookies, + msgr@, + ma@, xmc#1, + blink=\E[2p, dim=\E[1p, invis=\E[4p, is3=\E[m\E[p, + rev=\E[16p, rmacs=\E[0p\017, rmso=\E[0p, rmul=\E[0p, + sgr=\E[%{0}%?%p2%p6%|%t%{8}%|%;%?%p1%p3%|%p6%|%t%{16}%|%;%?%p4%t%{2}%|%;%?%p1%p5%|%t%{1}%|%;%?%p7%t%{4}%|%;%dp%?%p9%t\016%e\017%;, + sgr0=\E[0p\017, smacs=\E[0p\016, smso=\E[17p, smul=\E[8p, + use=wy75, +wy75-vb|wyse75-vb|wyse 75 with visible bell, + pb@, + bel@, use=wy75, +wy75-w|wyse75-w|wyse 75 in 132 column mode, + cols#132, wsl#130, + rs2=\E[35h\E[?3h$<80>, use=wy75, +wy75-wvb|wyse75-wvb|wyse 75 with visible bell 132 columns, + pb@, + bel@, use=wy75-w, +# +# Wyse 85 emulating a vt220 7 bit mode. +# 24 line screen with status line. +# +# The vt220 mode permits more function keys but it wipes out +# the escape key. I strongly recommend that <f11> be set to +# escape (esc). +# The terminal may have to be set for 8 data bits and 2 stop +# bits for the arrow keys to work. +# The Wyse 85 runs faster with XON/XOFF enabled. Also the +# <dch> and <ich> work best when XON/XOFF is set. <ich> and +# <dch> leave trash on the screen when used without XON/XOFF. +# +wy85|wyse85|wyse 85, + am, hs, mc5i, mir, msgr, xenl, xon, + cols#80, it#8, lines#24, wsl#80, + acsc=``aaffggjjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~, + bel=^G, blink=\E[5m, bold=\E[1m, cbt=\E[Z, civis=\E[?25l, + clear=\E[H\E[J$<110>, cnorm=\E[?25h, cr=^M, + csr=\E[%i%p1%d;%p2%dr, cub=\E[%p1%dD, cub1=^H, + cud=\E[%p1%dB, cud1=^J, cuf=\E[%p1%dC, cuf1=\E[C, + cup=\E[%i%p1%d;%p2%dH$<1>, cuu=\E[%p1%dA, cuu1=\E[A, + dch=\E[%p1%dP$<3*>, dch1=\E[P$<3>, dim=\E[2m, + dl=\E[%p1%dM$<3*>, dl1=\E[M$<3>, dsl=\E[40l, + ech=\E[%p1%dX, ed=\E[J$<110>, el=\E[K$<1>, el1=\E[1K, + enacs=\E)0, flash=\E[30h\E\,\E[30l$<300>, + fsl=\E[1;24r\E8, home=\E[H, ht=\011$<1>, hts=\EH, + ich=\E[%p1%d@$<4*>, il=\E[%p1%dL$<5*>, il1=\E[L$<5>, + ind=\n$<3>, invis=\E[8m, ip=$<3>, is1=\E[62;1"p\E[?5W, + is2=\E[2;4;20;30l\E[?1;4;10;16l\E[12h\E[?7;8;25h$<16>, + is3=\E>\E(B\E)0\017\E[m, ka1=\EOw, ka3=\EOy, kb2=\EOu, + kbs=^H, kc1=\EOq, kc3=\EOs, kcub1=\E[D, kcud1=\E[B, + kcuf1=\E[C, kcuu1=\E[A, kdch1=\E[3~, kent=\EOM, kf1=\EOP, + kf10=\E[21~, kf11=\E[23~, kf12=\E[24~, kf13=\E[25~, + kf14=\E[26~, kf15=\E[28~, kf16=\E[29~, kf17=\E[31~, + kf18=\E[32~, kf19=\E[33~, kf2=\EOQ, kf20=\E[34~, kf3=\EOR, + kf4=\EOS, kf6=\E[17~, kf7=\E[18~, kf8=\E[19~, kf9=\E[20~, + kfnd=\E[1~, khlp=\E[28~, khome=\E[26~, kich1=\E[2~, + knp=\E[6~, kpp=\E[5~, kslt=\E[4~, lf1=PF1, lf2=PF2, lf3=PF3, + lf4=PF4, mc0=\E[0i, mc4=\E[4i, mc5=\E[5i, rc=\E8, rev=\E[7m, + ri=\EM$<3>, rmacs=^O, rmam=\E[?7l, rmir=\E[4l, rmkx=\E>, + rmso=\E[m, rmul=\E[m, rs1=\E[13l\E[3l\E!p, + rs2=\E[35h\E[?3l$<70>, rs3=\E[?5l, sc=\E7, + sgr=\E[0%?%p2%t;4%;%?%p3%p1%|%t;7%;%?%p4%t;5%;%?%p5%t;2%;%?%p6%t;1%;%?%p7%t;8%;m%?%p9%t\016%e\017%;, + sgr0=\E[m\017, smacs=^N, smam=\E[?7h, smir=\E[4h, + smkx=\E[?1l\E=, smso=\E[7m, smul=\E[4m, tbc=\E[3g, + tsl=\E[40h\E7\E[25;%i%p1%dH, +# +# Wyse 85 with visual bell. +wy85-vb|wyse85-vb|wyse 85 with visible bell, + bel@, flash=\E[30h\E\,\E[30l$<300>, use=wy85, +# +# Wyse 85 in 132-column mode. +wy85-w|wyse85-w|wyse 85 in 132-column mode, + cols#132, wsl#132, + rs2=\E[35h\E[?3h$<70>, use=wy85, +# +# Wyse 85 in 132-column mode with visual bell. +wy85-wvb|wyse85-wvb|wyse 85 with visible bell 132-columns, + bel@, + use=wy85-w, +# +# Wyse 185 emulating a vt320 7 bit mode. +# +# This terminal always displays 25 lines. These lines may be used +# as 24 data lines and a terminal status line (top or bottom) or +# 25 data lines. The 48 and 50 line modes change the page size +# and not the number of lines on the screen. +# +# The Compose Character key can be used as a meta key if changed +# by set-up. +# +wy185|wyse185|wyse 185, + am, hs, km, mc5i, mir, msgr, xenl, xon, + cols#80, it#8, lines#24, wsl#80, + acsc=``aaffggjjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~, + bel=^G, blink=\E[5m, bold=\E[1m, cbt=\E[Z, civis=\E[?25l, + clear=\E[H\E[J$<40>, cnorm=\E[34h\E[?25h, cr=^M, + csr=\E[%i%p1%d;%p2%dr$<20>, cub=\E[%p1%dD, cub1=^H, + cud=\E[%p1%dB, cud1=^J, cuf=\E[%p1%dC, cuf1=\E[C, + cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA, cuu1=\E[A, + cvvis=\E[?25h\E[34l, dch=\E[%p1%dP$<3>, dch1=\E[P$<3>, + dim=\E[2m, dl=\E[%p1%dM$<2*>, dl1=\E[M$<2>, + dsl=\E7\E[99;0H\E[K\E8, ech=\E[%p1%dX, ed=\E[J$<40>, + el=\E[K, el1=\E[1K, enacs=\E)0, + flash=\E[30h\E\,\E[30l$<100>, fsl=\E[1;24r\E8, + home=\E[H, hpa=\E[%i%p1%d`, ht=^I, hts=\EH, + ich=\E[%p1%d@$<2>, il=\E[%p1%dL$<3*>, il1=\E[L$<3>, + ind=\n$<2>, invis=\E[8m, ip=$<4>, is1=\E[?5W, + is2=\E[2;4;20;30l\E[?1;4;10;16l\E[12h\E[?7;8;25h, + is3=\E>\E(B\E)0\017\E[m, ka1=\EOw, ka3=\EOy, kb2=\EOu, + kbs=^H, kc1=\EOq, kc3=\EOs, kcbt=\E[Z, kcub1=\E[D, + kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A, kdch1=\E[3~, kent=\EOM, + kf1=\EOP, kf10=\E[21~, kf11=\E[23~, kf12=\E[24~, + kf13=\E[25~, kf14=\E[26~, kf15=\E[28~, kf16=\E[29~, + kf17=\E[31~, kf18=\E[32~, kf19=\E[33~, kf2=\EOQ, + kf20=\E[34~, kf3=\EOR, kf4=\EOS, kf6=\E[17~, kf7=\E[18~, + kf8=\E[19~, kf9=\E[20~, kfnd=\E[1~, khlp=\E[28~, + khome=\E[26~, kich1=\E[2~, knp=\E[6~, kpp=\E[5~, + kslt=\E[4~, lf1=PF1, lf2=PF2, lf3=PF3, lf4=PF4, mc0=\E[0i, + mc4=\E[4i, mc5=\E[5i, rc=\E8, rev=\E[7m, ri=\EM$<2>, + rmacs=^O, rmam=\E[?7l, rmcup=\E[ R, rmir=\E[4l, rmkx=\E>, + rmso=\E[27m, rmul=\E[24m, + rs1=\E[13l\E[3l\E\\\E[63;1"p\E[!p, rs2=\E[35h\E[?3l, + rs3=\E[?5l\E[47h\E[40l\E[r, sc=\E7, + sgr=\E[0%?%p2%t;4%;%?%p3%p1%|%t;7%;%?%p4%t;5%;%?%p5%t;2%;%?%p6%t;1%;%?%p7%t;8%;m%?%p9%t\016%e\017%;, + sgr0=\E[m\017, smacs=^N, smam=\E[?7h, smcup=\E[ Q, + smir=\E[4h, smkx=\E[?1l\E=, smso=\E[7m, smul=\E[4m, + tbc=\E[3g, tsl=\E7\E[99;%i%p1%dH, vpa=\E[%i%p1%dd, +# +# Wyse 185 with 24 data lines and top status (terminal status) +wy185-24|wyse185-24|wyse 185 with 24 data lines, + hs@, + dsl@, fsl@, rs3=\E[?5l\E[47h\E[40l\E[1;24r, tsl@, use=wy185, +# +# Wyse 185 with visual bell. +wy185-vb|wyse185-vb|wyse 185+flash, + bel@, use=wy185, +# +# Wyse 185 in 132-column mode. +wy185-w|wyse185-w|wyse 185 in 132-column mode, + cols#132, wsl#132, + dch=\E[%p1%dP$<7>, dch1=\E[P$<7>, ich=\E[%p1%d@$<7>, + ip=$<7>, rs2=\E[35h\E[?3h, + use=wy185, +# +# Wyse 185 in 132-column mode with visual bell. +wy185-wvb|wyse185-wvb|wyse 185+flash+132 cols, + bel@, use=wy185-w, + +# wy325 terminfo entries +# Done by Joe H. Davis 3-9-92 + +# lines 25 columns 80 +# +wy325|wyse325|Wyse epc, + am, bw, hs, mc5i, mir, + cols#80, lh#1, lines#24, lw#8, nlab#8, pb#9601, wsl#45, + acsc=+/\,.0[Iha2fxgqh1jYk?lZm@nEqDtCu4vAwBx3yszr{c~~, + bel=^G, blink=\EG2, cbt=\EI, civis=\E`0, clear=\E+$<50>, + cnorm=\E`1, cr=^M, cub1=^H, cud1=^J, cuf1=^L, + cup=\E=%p1%{32}%+%c%p2%{32}%+%c, cuu1=^K, dch1=\EW$<7>, + dim=\EGp, dl1=\ER$<3>, dsl=\EF\r, ed=\EY$<50>, el=\ET$<4>, + flash=\E`8$<100/>\E`9, fsl=^M, home=^^, ht=^I, hts=\E1, + il1=\EE$<3>, ind=\n$<3>, ip=$<2>, is1=\EcB0\EcC1, + is2=\EcD\E'\Er\EH\003\Ed/\EO\Ee1\Ed*\E`@\E`9\E`1\016\024\El, + is3=\Ew0$<16>, kHOM=\E{, kbs=^H, kcbt=\EI, kcub1=^H, + kcud1=^J, kcuf1=^L, kcuu1=^K, kdch1=\EW, kdl1=\ER, ked=\EY, + kel=\ET, kent=\E7, kf1=^A@\r, kf10=^AI\r, kf11=^AJ\r, + kf12=^AK\r, kf13=^AL\r, kf14=^AM\r, kf15=^AN\r, kf16=^AO\r, + kf2=^AA\r, kf3=^AB\r, kf4=^AC\r, kf5=^AD\r, kf6=^AE\r, + kf7=^AF\r, kf8=^AG\r, kf9=^AH\r, khome=^^, kich1=\Eq, + kil1=\EE, knp=\EK, kpp=\EJ, kprt=\EP, krpl=\Er, ll=^^^K, + mc0=\EP, mc4=^T, mc5=\Ed#, + pfloc=\EZ2%p1%{63}%+%c%p2%s\177, + pfx=\EZ1%p1%{63}%+%c%p2%s\177, + pln=\Ez%p1%{47}%+%c%p2%s\r, prot=\E), ri=\Ej$<2>, + rmacs=\EcD, rmam=\Ed., rmcup=\Ew0, rmir=\Er, rmln=\EA11, + rs1=\E~!\E~4$<30>, rs2=\EeF\E`\:$<70>, + rs3=\EwG\Ee($<100>, + sgr=%?%p8%t\E)%e\E(%;%?%p9%t\EcE%e\EcD%;\EG%{48}%?%p2%t%{8}%|%;%?%p1%p3%|%p6%|%t%{4}%|%;%?%p4%t%{2}%|%;%?%p1%p5%|%t%{64}%|%;%?%p7%t%{1}%|%;%c, + sgr0=\E(\EH\003\EG0\EcD, smacs=\EcE, smam=\Ed/, + smcup=\Ew1, smir=\Eq, smln=\EA10, smso=\EGt, tbc=\E0, + tsl=\EF, + use=adm+sgr, + +# +# lines 24 columns 80 vb +# +wy325-vb|wyse325-vb|wyse-325 with visual bell, + bel@, use=wy325, + +# +# lines 24 columns 132 +# +wy325-w|wyse325-w|wy325w-24|wyse-325 in wide mode, + cols#132, lw#7, nlab#16, wsl#97, + cup=\Ea%i%p1%dR%p2%dC, dch1=\EW$<12>, ip=$<4>, + rs2=\E`;$<70>, use=wy325, +# +# lines 25 columns 80 +# +wy325-25|wyse325-25|wy325-80|wyse-325|wyse-325 25 lines, + lh@, lines#25, lw@, nlab@, + pln@, rs3=\EwG\Ee)$<100>, use=wy325, +# +# lines 25 columns 132 +# +wy325-25w|wyse325-25w|wy325 132 columns, + lh@, lines#25, lw@, nlab@, + pln@, rs3=\EwG\Ee)$<100>, use=wy325-w, +# +# lines 25 columns 132 vb +# +wy325-w-vb|wy325-wvb|wyse325-wvb|wyse-325 wide mode reverse video, + bel@, + use=wy325-w, + +# +# lines 42 columns 80 +# +wy325-42|wyse325-42|wyse-325 42 lines, + lh@, lines#42, lw@, nlab@, + pln@, rs3=\EwG\Ee)$<100>, use=wy325, +# +# lines 42 columns 132 +# +wy325-42w|wyse325-42w|wyse-325 42 lines wide mode, + lh@, lines#42, lw@, nlab@, + pln@, rs3=\EwG\Ee)$<100>, use=wy325-w, +# +# lines 42 columns 132 vb +# +wy325-42w-vb|wy325-42wvb|wyse-325 42 lines wide mode visual bell, + bel@, + use=wy325-w, +# +# lines 43 columns 80 +# +wy325-43|wyse325-43|wyse-325 43 lines, + lh@, lines#43, lw@, nlab@, + pln@, use=wy325, +# +# lines 43 columns 132 +# +wy325-43w|wyse325-43w|wyse-325 43 lines wide mode, + lh@, lines#43, lw@, nlab@, + pln@, rs3=\EwG\Ee)$<100>, use=wy325-w, +# +# lines 43 columns 132 vb +# +wy325-43w-vb|wy325-43wvb|wyse-325 43 lines wide mode visual bell, + bel@, + use=wy325-w, + +# Wyse 370 -- 24 line screen with status line. +# +# The terminal may have to be set for 8 data bits and 2 stop +# bits for the arrow keys to work. +# +# If you change keyboards the terminal will send different +# escape sequences. +# The following definition is for the basic terminal without +# function keys. +# +# <u0> -> enter Tektronix 4010/4014 mode +# <u1> -> exit Tektronix 4010/4014 mode +# <u2> -> enter ASCII mode (from any ANSI mode) +# <u3> -> exit ASCII mode (goto native ANSI mode) +# <u4> -> enter Tek 4207 ANSI mode (from any ANSI mode) +# <u5> -> exit Tek 4207 mode (goto native ANSI mode) +# +# Bug: The <op> capability resets attributes. +wy370-nk|wyse 370 without function keys, + am, ccc, hs, mc5i, mir, msgr, xenl, xon, + colors#64, cols#80, it#8, lines#24, ncv#48, pairs#64, wsl#80, + acsc=``aaffggjjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~, + bel=^G, blink=\E[5m, bold=\E[1m, cbt=\E[Z, civis=\E[?25l, + clear=\E[H\E[J$<40>, cnorm=\E[34h\E[?25h, cr=^M, + csr=\E[%i%p1%d;%p2%dr, cub=\E[%p1%dD, cub1=^H, + cud=\E[%p1%dB, cud1=^J, cuf=\E[%p1%dC, cuf1=\E[C, + cup=\E[%i%p1%d;%p2%dH$<1>, cuu=\E[%p1%dA, cuu1=\E[A, + cvvis=\E[?25h\E[34l, dch=\E[%p1%dP$<1*>, dch1=\E[P$<1>, + dclk=\E[31h, dim=\E[2m, dl=\E[%p1%dM$<2*>, dl1=\E[M$<2>, + dsl=\E[40l, ech=\E[%p1%dX$<.1*>, ed=\E[J$<40>, + el=\E[K$<10>, el1=\E[1K$<12>, enacs=\E)0, + flash=\E[30h\E\,\E[30l$<300>, fsl=\E[1;24r\E8, + home=\E[H, hpa=\E[%i%p1%d`, ht=\011$<1>, hts=\EH, + ich=\E[%p1%d@$<1*>, il=\E[%p1%dL$<2*>, il1=\E[L$<2>, + ind=\n$<2>, + initc=\E[66;%p1%d;%?%p2%{250}%<%t%{0}%e%p2%{500}%<%t%{16}%e%p2%{750}%<%t%{32}%e%{48}%;%?%p3%{250}%<%t%{0}%e%p3%{500}%<%t%{4}%e%p3%{750}%<%t%{8}%e%{12}%;%?%p4%{250}%<%t%{0}%e%p4%{500}%<%t%{1}%e%p4%{750}%<%t%{2}%e%{3}%;%{1}%+%+%+%dw, + invis=\E[8m, ip=$<1>, is1=\E[90;1"p\E[?5W$<6>, + is2=\E[2;4;20;30;40l\E[?1;10;16l\E[12h\E[?7;8;25h, + is3=\E>\017\E)0\E(B\E[63;0w\E[m, mc0=\E[0i, mc4=\E[4i, + mc5=\E[5i, + oc=\E[60w\E[63;0w\E[66;1;4w\E[66;2;13w\E[66;3;16w\E[66;4;49w\E[66;5;51w\E[66;6;61w\E[66;7;64w, + op=\E[m, rc=\E8, rev=\E[7m, ri=\EM$<2>, rmacs=^O, + rmam=\E[?7l, rmclk=\E[31l, rmcup=\E[ R, rmir=\E[4l, + rmkx=\E>, rmso=\E[27m, rmul=\E[24m, + rs1=\E[13l\E[3l\E!p\E[?4i, rs2=\E[35h\E[?3l$<8>, + rs3=\E[?5l, sc=\E7, setb=\E[62;%p1%dw, setf=\E[61;%p1%dw, + sgr=\E[0%?%p2%t;4%;%?%p3%p1%|%t;7%;%?%p4%t;5%;%?%p5%t;2%;%?%p6%t;1%;%?%p7%t;8%;m%?%p9%t\016%e\017%;, + sgr0=\E[m\017, smacs=^N, smam=\E[?7h, smcup=\E[ Q, + smir=\E[4h, smkx=\E[?1l\E=, smso=\E[7m, smul=\E[4m, + tbc=\E[3g, tsl=\E[40l\E[40h\E7\E[99;%i%p1%dH, + u0=\E[?38h\E8, u1=\E[?38l\E)0, u2=\E[92;52"p, u3=\E~B, + u4=\E[92;76"p, u5=\E%!1\E[90;1"p, vpa=\E[%i%p1%dd, +# +# Function key set for the ASCII (wy-50 compatible) keyboard +# This is the default 370. +# +wy370|wyse370|wy370-101k|Wyse 370 with 101 key keyboard, + kbs=^H, kcbt=\E[Z, kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C, + kcuu1=\E[A, kdch1=\EOQ, kdl1=\EOQ, kent=\EOM, kf1=\E[?4i, + kf10=\E[21~, kf11=\E[23~, kf12=\E[24~, kf13=\E[25~, + kf14=\E[26~, kf15=\E[28~, kf16=\E[29~, kf2=\E[?3i, + kf3=\E[2i, kf4=\E[@, kf5=\E[M, kf6=\E[17~, kf7=\E[18~, + kf8=\E[19~, kf9=\E[20~, khome=\E[H, kich1=\EOP, kil1=\EOP, + knp=\E[U, kpp=\E[V, + use=wy370-nk, +# +# Function key set for the VT-320 (and wy85) compatible keyboard +# +wy370-105k|Wyse 370 with 105 key keyboard, + ka1=\EOw, ka3=\EOy, kb2=\EOu, kbs=^H, kc1=\EOq, kc3=\EOs, + kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A, + kdch1=\E[3~, kent=\EOM, kf1=\EOP, kf10=\E[21~, kf11=\E[23~, + kf12=\E[24~, kf13=\E[25~, kf14=\E[26~, kf15=\E[28~, + kf16=\E[29~, kf17=\E[31~, kf18=\E[32~, kf19=\E[33~, + kf2=\EOQ, kf20=\E[34~, kf3=\EOR, kf4=\EOS, kf6=\E[17~, + kf7=\E[18~, kf8=\E[19~, kf9=\E[20~, kfnd=\E[1~, + khlp=\E[28~, khome=\E[26~, kich1=\E[2~, knp=\E[6~, + kpp=\E[5~, kslt=\E[4~, lf1=PF1, lf2=PF2, lf3=PF3, lf4=PF4, + use=wy370-nk, +# +# Function key set for the PC compatible keyboard +# +wy370-EPC|Wyse 370 with 102 key keyboard, + kbs=^H, kcbt=\E[Z, kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C, + kcuu1=\E[A, kend=\E[1~, kent=\EOM, kf1=\EOP, kf10=\E[21~, + kf11=\E[23~, kf12=\E[24~, kf2=\EOQ, kf3=\EOR, kf4=\EOS, + kf5=\E[M, kf6=\E[17~, kf7=\E[18~, kf8=\E[19~, kf9=\E[20~, + khome=\E[H, kich1=\E[2~, knp=\E[U, kpp=\E[V, + use=wy370-nk, +# +# Wyse 370 with visual bell. +wy370-vb|Wyse 370 with visible bell, + bel@, use=wy370, +# +# Wyse 370 in 132-column mode. +wy370-w|Wyse 370 in 132-column mode, + cols#132, wsl#132, + rs2=\E[35h\E[?3h$<70>, use=wy370, +# +# Wyse 370 in 132-column mode with visual bell. +wy370-wvb|Wyse 370 with visible bell 132-columns, + flash=\E[30h\E\,\E[30l$<300>, + use=wy370-w, +wy370-rv|Wyse 370 reverse video, + rs3=\E[32h\E[?5h, use=wy370, +# +# Wyse 99gt Tektronix 4010/4014 emulator, +# +wy99gt-tek|Wyse 99gt Tektronix 4010/4014 emulator, + am, os, + cols#74, lines#35, + bel=^G, clear=\E^L, cr=^M, cub1=^H, cud1=^J, cuf1=\s, + cup=\035%{3040}%{89}%p1%*%-%Py%p2%{55}%*%Px%gy%{128}%/%{31}%&%{32}%+%c%gy%{3}%&%{4}%*%gx%{3}%&%+%{96}%+%c%gy%{004}%/%{31}%&%{96}%+%c%gx%{128}%/%{31}%&%{32}%+%c%gx%{004}%/%{31}%&%{64}%+%c\037, + cuu1=^K, ff=^L, + hd=\036HHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHH\037, + home=^]7`x @\037, + hu=\036DDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDD\037, + is2=\E8, nel=^M^J, u0=\E~>\E8, u1=\E[42h, +# +# Wyse 160 Tektronix 4010/4014 emulator, +# +wy160-tek|Wyse 160 Tektronix 4010/4014 emulator, + cup=\035%{3103}%{91}%p1%*%-%Py%p2%{55}%*%Px%gy%{128}%/%{31}%&%{32}%+%c%gy%{3}%&%{4}%*%gx%{3}%&%+%{96}%+%c%gy%{004}%/%{31}%&%{96}%+%c%gx%{128}%/%{31}%&%{32}%+%c%gx%{004}%/%{31}%&%{64}%+%c\037, + home=^]8`g @\037, + use=wy99gt-tek, +# +# Wyse 370 Tektronix 4010/4014 emulator, +# +wy370-tek|Wyse 370 Tektronix 4010/4014 emulator, + am, os, + cols#80, lines#36, + bel=^G, clear=\E^L, cr=^M, cub1=^H, cud1=^J, cuf1=\s, + cup=\035%{775}%{108}%p1%*%{5}%/%-%Py%p2%{64}%*%{4}%+%{5}%/%Px%gy%{32}%/%{31}%&%{32}%+%c%gy%{31}%&%{96}%+%c%gx%{32}%/%{31}%&%{32}%+%c%gx%{31}%&%{64}%+%c\037, + cuu1=^K, ff=^L, + hd=\036HHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHH\037, + home=^]8g @\037, + hu=\036DDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDD\037, + is2=\E8, kbs=^H, kcub1=^H, kcud1=^J, kcuf1=^I, kcuu1=^K, + nel=^M^J, u0=\E[?38h\E8, u1=\E[?38l\E)0, + +# Vendor-supplied Wyse entries end here. + +# +#TITLE: TERMINFO ENTRY WY520 +#DATE: 8/5/93 +# The WY520 terminfo is based on the WY285 entry published on the WYSE +# BBS with the addition of more function keys and special keys. +# +# rs1 -> set personality +# rs2 -> set number of columns +# rs3 -> set number of lines +# is1 -> select the proper font +# is2 -> do the initialization +# is3 -> If this string is empty then rs3 gets sent. +# +# Wyse 520 emulating a vt420 7 bit mode with default ANSI keyboard +# - The BS key is programmed to generate BS in smcup since +# is2 doesn't seem to work. +# - Remove and shift/Remove: delete a character +# - Insert : enter insert mode +# - Find : delete to end of file +# - Select : clear a line +# - F11, F12, F13: send default sequences (not ESC, BS, LF) +# - F14 : Home key +# - Bottom status line (host writable line) is used. +# - smkx,rmkx are removed because this would put the numeric +# keypad in Dec application mode which doesn't seem to work +# with SCO applications. +# +wy520|wyse520|wyse 520, + am, hs, km, mc5i, mir, xenl, xon, + cols#80, it#8, lines#24, wsl#80, + acsc=``aaffggjjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~, + bel=^G, blink=\E[5m, bold=\E[1m, cbt=\E[Z, civis=\E[?25l, + clear=\E[H\E[J$<40>, cnorm=\E[34h\E[?25h, cr=^M, + csr=\E[%i%p1%d;%p2%dr$<20>, cub=\E[%p1%dD, cub1=^H, + cud=\E[%p1%dB, cud1=^J, cuf=\E[%p1%dC, cuf1=\E[C, + cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA, cuu1=\E[A, + cvvis=\E[?25h\E[34l, dch=\E[%p1%dP$<3>, dch1=\E[P$<30>, + dim=\E[2m, dl=\E[%p1%dM$<2*>, dl1=\E[M$<2>, dsl=\E[0$~, + ech=\E[%p1%dX, ed=\E[J$<40>, el=\E[K, el1=\E[1K, + enacs=\E)0, fsl=\E[0$}, home=\E[H, hpa=\E[%i%p1%d`, ht=^I, + hts=\EH, ich=\E[%p1%d@$<2>, il=\E[%p1%dL$<3*>, + il1=\E[L$<3>, ind=\n$<2>, invis=\E[8m, ip=$<4>, is1=\E[?5W, + is2=\E[2;4;20;30l\E[?1;4;10;16l\E[12h\E[?7;8;25;67h, + is3=\E>\E(B\E)0\017\E[m, ka1=\EOw, ka3=\EOu, kb2=\EOy, + kbs=^H, kc1=\EOq, kc3=\EOs, kcbt=\E[Z, kcub1=\E[D, + kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A, kdch1=\E[3~, ked=\E[1~, + kel=\E[4~, kent=\EOM, kf1=\EOP, kf10=\E[21~, kf11=\E[23~, + kf12=\E[24~, kf13=\E[25~, kf14=\E[26~, kf15=\E[28~, + kf16=\E[29~, kf17=\E[31~, kf18=\E[32~, kf19=\E[33~, + kf2=\EOQ, kf20=\E[34~, kf3=\EOR, kf4=\EOS, kf6=\E[17~, + kf7=\E[18~, kf8=\E[19~, kf9=\E[20~, kfnd=\E[1~, + khlp=\E[28~, khome=\E[26~, kich1=\E[2~, knp=\E[6~, + kpp=\E[5~, kslt=\E[4~, lf1=PF1, lf2=PF2, lf3=PF3, lf4=PF4, + mc0=\E[0i, mc4=\E[4i, mc5=\E[5i, rc=\E8, rev=\E[7m, + ri=\EM$<2>, rmacs=^O, rmam=\E[?7l, rmcup=\E[ R, rmir=\E[4l, + rmso=\E[m, rmul=\E[24m, + rs1=\E[13l\E[3l\E\\\E[63;1"p\E[!p, rs2=\E[35h\E[?3l, + rs3=\E[?5l\E[47h\E[40l\E[r, sc=\E7, + sgr=\E[0%?%p2%t;4%;%?%p3%p1%|%t;7%;%?%p4%t;5%;%?%p5%t;2%;%?%p6%t;1%;%?%p7%t;8%;m%?%p9%t\016%e\017%;, + sgr0=\E[m\017, smacs=^N, smam=\E[?7h, + smcup=\E[ Q\E[?67;8h, smir=\E[4h, smso=\E[7m, smul=\E[4m, + tbc=\E[3g, tsl=\E[2$~\E[1$}\E[%i%p1%d`, + vpa=\E[%i%p1%dd, +# +# Wyse 520 with 24 data lines and status (terminal status) +wy520-24|wyse520-24|wyse 520 with 24 data lines, + hs@, + dsl@, fsl@, rs3=\E[?5l\E[47h\E[40l\E[1;24r, tsl@, use=wy520, +# +# Wyse 520 with visual bell. +wy520-vb|wyse520-vb|wyse 520 with visible bell, + flash=\E[30h\E\,\E[30l$<100>, use=wy520, +# +# Wyse 520 in 132-column mode. +wy520-w|wyse520-w|wyse 520 in 132-column mode, + cols#132, wsl#132, + dch=\E[%p1%dP$<7>, dch1=\E[P$<7>, ich=\E[%p1%d@$<7>, + ip=$<7>, rs2=\E[35h\E[?3h, + use=wy520, +# +# Wyse 520 in 132-column mode with visual bell. +wy520-wvb|wyse520-wvb|wyse 520 with visible bell 132-columns, + flash=\E[30h\E\,\E[30l$<100>, + use=wy520-w, +# +# +# Wyse 520 emulating a vt420 7 bit mode. +# The DEL key is programmed to generate BS in is2. +# With EPC keyboard. +# - 'End' key will clear till end of line on EPC keyboard +# - Shift/End : ignored. +# - Insert : enter insert mode. +# - Delete : delete a character (have to change interrupt character +# to CTRL-C: stty intr '^c') for it to work since the +# Delete key sends 7FH. +wy520-epc|wyse520-epc|wyse 520 with EPC keyboard, + kdch1=\177, kel=\E[4~, kend=\E[4~, kf0=\E[21~, kf1=\E[11~, + kf2=\E[12~, kf3=\E[13~, kf4=\E[14~, kf5=\E[15~, khome=\E[H, + use=wy520, +# +# Wyse 520 with 24 data lines and status (terminal status) +# with EPC keyboard. +wy520-epc-24|wyse520-pc-24|wyse 520 with 24 data lines, + hs@, + dsl@, fsl@, rs3=\E[?5l\E[47h\E[40l\E[1;24r, tsl@, use=wy520-epc, +# +# Wyse 520 with visual bell. +wy520-epc-vb|wyse520-pc-vb|wyse 520 with visible bell, + flash=\E[30h\E\,\E[30l$<100>, + use=wy520-epc, +# +# Wyse 520 in 132-column mode. +wy520-epc-w|wyse520-epc-w|wyse 520 in 132-column mode with EPC keyboard, + cols#132, wsl#132, + dch=\E[%p1%dP$<7>, dch1=\E[P$<7>, ich=\E[%p1%d@$<7>, + ip=$<7>, rs2=\E[35h\E[?3h, + use=wy520-epc, +# +# Wyse 520 in 132-column mode with visual bell. +wy520-epc-wvb|wyse520-p-wvb|wyse 520 with visible bell 132-columns, + flash=\E[30h\E\,\E[30l$<100>, + use=wy520-epc-w, +# +# Wyse 520 in 80-column, 36 lines +wy520-36|wyse520-36|wyse 520 with 36 data lines, + hs@, + lines#36, + dsl@, fsl@, rs3=\E[?5l\E[36*|\E[36t\E[40l\E[1;36r, tsl@, use=wy520, +# +# Wyse 520 in 80-column, 48 lines +wy520-48|wyse520-48|wyse 520 with 48 data lines, + hs@, + lines#48, + dsl@, fsl@, rs3=\E[?5l\E[48*|\E[48t\E[40l\E[1;48r, tsl@, use=wy520, +# +# Wyse 520 in 132-column, 36 lines +wy520-36w|wyse520-36w|wyse 520 with 132 columns and 36 data lines, + cols#132, wsl#132, + rs2=\E[?3h, + rs3=\E[?5l\E[36*|\E[36t\E[40l\E[1;36r\E[132$|, use=wy520-36, +# +# Wyse 520 in 132-column, 48 lines +wy520-48w|wyse520-48w|wyse 520 with 48 data lines, + cols#132, wsl#132, + rs2=\E[?3h, + rs3=\E[?5l\E[48*|\E[48t\E[40l\E[1;48r\E[132$|, use=wy520-48, +# +# +# Wyse 520 in 80-column, 36 lines with EPC keyboard +wy520-36pc|wyse520-36pc|wyse 520 with 36 data lines and EPC keyboard, + hs@, + lines#36, + dsl@, fsl@, rs3=\E[?5l\E[36*|\E[36t\E[40l\E[1;36r, tsl@, use=wy520-epc, +# +# Wyse 520 in 80-column, 48 lines with EPC keyboard +wy520-48pc|wyse520-48pc|wyse 520 with 48 data lines and EPC keyboard, + hs@, + lines#48, + dsl@, fsl@, rs3=\E[?5l\E[48*|\E[48t\E[40l\E[1;48r, tsl@, use=wy520-epc, +# +# Wyse 520 in 132-column, 36 lines with EPC keyboard +wy520-36wpc|wyse520-36wpc|wyse 520 with 36 data lines and EPC keyboard, + cols#132, wsl#132, + rs2=\E[?3h, + rs3=\E[?5l\E[36*|\E[36t\E[40l\E[1;36r\E[132$|, use=wy520-36pc, +# +# Wyse 520 in 132-column, 48 lines with EPC keyboard +wy520-48wpc|wyse520-48wpc|wyse 520 with 48 data lines, + cols#132, wsl#132, + rs2=\E[?3h, + rs3=\E[?5l\E[48*|\E[48t\E[40l\E[1;48r\E[132$|, use=wy520-48pc, + +# From: John Gilmore <hoptoad!gnu@lll-crg.arpa> +# (wyse-vp: removed <if=/usr/share/tabset/wyse-adds>, there's no such +# file and we don't know what <hts> is -- esr) +wyse-vp|Wyse 50 in ADDS Viewpoint emulation mode with "enhance" on, + am, + cols#80, it#8, lines#24, + bel=^G, clear=^L, cr=^M, cub1=^H, cud1=^J, cuf1=^F, + cup=\EY%p1%{32}%+%c%p2%{32}%+%c, cuu1=^Z, dch1=\EW, + dl1=\El, ed=\Ek, el=\EK, home=^A, ht=^I, il1=\EM, ind=^J, + is2=\E`\:\E`9\017\Er, kbs=^H, kcub1=^U, kcud1=^J, kcuf1=^F, + kcuu1=^Z, khome=^A, ll=^A^Z, nel=^M^J, rmir=\Er, rmso=^O, + rmul=^O, rs1=\E`\:\E`9\017\Er, sgr0=^O, smir=\Eq, smso=^N, + smul=^N, + +wy75ap|wyse75ap|wy-75ap|wyse-75ap|Wyse WY-75 Applications and Cursor keypad, + is2=\E[1;24r\E[?10;3l\E[?1;25h\E[4l\E[m\E(B\E=, + kbs=^H, kcub1=\EOD, kcud1=\EOB, kcuf1=\EOC, kcuu1=\EOA, + khome=\EOH, rmkx=\E[?1l\E>$<10/>, smkx=\E[?1h\E=$<10/>, + use=wy75, + +# From: Eric Freudenthal <freudent@eric.ultra.nyu.edu> +wy100q|Wyse 100 for Quotron, + cols#80, lines#24, xmc#1, + cbt=\EI, clear=^Z, cub1=^H, cud1=^J, cuf1=^L, + cup=\E=%p1%{32}%+%c%p2%{32}%+%c, cuu1=^K, dch1=\EW, + dl1=\ER, ed=\EY, el=\ET, home=^^, il1=\EE, invis@, + is2=\E`\:\0\EC\EDF\E0\E'\E(\EA21, kcub1=^H, kcud1=^J, + kcuf1=^L, kcuu1=^K, ri=\Ej, rmir=\Er, smir=\Eq, + use=adm+sgr, + +#### Kermit terminal emulations +# +# Obsolete Kermit versions may be listed in the section describing obsolete +# non-ANSI terminal emulators later in the file. +# + +# KERMIT standard all versions. +# Straight ascii keyboard. :sr=\EI: not avail. many versions + bug prone in vi. +# (kermit: removed obsolete ":ma=^Hh^Jj^Kk^Ll^^H:" -- esr) +# From: greg small <gts@populi.berkeley.edu> 9-25-84 +kermit|standard kermit, + cols#80, lines#24, + clear=\EE, cub1=^H, cuf1=\EC, + cup=\EY%p1%{32}%+%c%p2%{32}%+%c, cuu1=\EA, ed=\EJ, + el=\EK, home=\EH, is2=K0 Standard Kermit 9-25-84\n, + kcub1=^H, kcud1=^J, kcuf1=^L, kcuu1=^K, khome=^^, +kermit-am|standard kermit plus auto-margin, + am, + is2=K1 Standard Kermit plus Automatic Margins\n, use=kermit, +# IBMPC Kermit 1.2. +# Bugs: <ed>, <el>: do not work except at beginning of line! <clear> does +# not work, but fake with :cl=\EH\EJ (since :cd=\EJ: works at beginning of +# line). +# From: greg small <gts@populi.berkeley.edu> 8-30-84 +pckermit|pckermit12|UCB IBMPC Kermit 1.2, + am, + lines#25, + clear=\EH\EJ, ed@, el@, + is2=K2 UCB IBMPC Kermit 1.2 8-30-84\n, use=kermit, +# IBMPC Kermit 1.20 +# Cannot use line 25, now acts funny like ansi special scrolling region. +# Initialization must escape from that region by cursor position to line 24. +# Cannot use character insert because 1.20 goes crazy if insert at col 80. +# Does not use :am: because autowrap is lost when kermit dropped and restarted. +# From: greg small <gts@populi.berkeley.edu> 12-19-84 +pckermit120|UCB IBMPC Kermit 1.20, + it#8, lines#24, + cud1=\EB, cvvis=\EO\Eq\EEK3, dch1=\EN, dl1=\EM, ht=^I, + il1=\EL, + is2=\EO\Eq\EJ\EY7 K3 UCB IBMPC Kermit 1.20 12-19-84\n, + rmir@, rmso=\Eq, smir@, smso=\Ep, + use=kermit, +# MS-DOS Kermit 2.27 for the IBMPC +# Straight ascii keyboard. :sr=\EI: not avail. many versions + bug prone in vi. +# Cannot use line 25, now acts funny like ansi special scrolling region. +# Initialization must escape from that region by cursor position to line 24. +# Does not use am: because autowrap is lost when kermit dropped and restarted. +# Reverse video for standout like H19. +# (msk227: removed obsolete ":ma=^Hh^Jj^Kk^Ll^^H:" -- esr) +# From: greg small <gts@populi.berkeley.edu> 3-17-85 +msk227|mskermit227|MS-DOS Kermit 2.27 for the IBMPC, + am@, + cols#80, it#8, lines#24, + clear=\EE, cub1=^H, cud1=\EB, cuf1=\EC, + cup=\EY%p1%{32}%+%c%p2%{32}%+%c, cuu1=\EA, + cvvis=\EO\Eq\EG\EwK4, dch1=\EN, dl1=\EM, ed=\EJ, el=\EK, + home=\EH, ht=^I, il1=\EL, + is2=\EO\Eq\EG\Ew\EJ\EY7 K4 MS Kermit 2.27 for the IBMPC 3-17-85\n, + kcub1=^H, kcud1=^J, kcuf1=^L, kcuu1=^K, khome=^^, rc=\Ek, + rmir=\EO, rmso=\Eq, sc=\Ej, smir=\E@, smso=\Ep, +# MS-DOS Kermit 2.27 with automatic margins +# From: greg small <gts@populi.berkeley.edu> 3-17-85 +msk227am|mskermit227am|UCB MS-DOS Kermit 2.27 with automatic margins, + am, + cvvis=\EO\Eq\EG\EvK5, + is2=\EO\Eq\EG\Ev\EJ\EY7 K5 MS Kermit 2.27 +automatic margins 3-17-85\n, use=msk227, +# MS-DOS Kermit 2.27 UCB 227.14 for the IBM PC +# Automatic margins now default. Use ansi <sgr> for highlights. +# Define function keys. +# (msk22714: removed obsolete ":kn#10:" -- esr) +# From: greg small <gts@populi.berkeley.edu> 3-17-85 +msk22714|mskermit22714|UCB MS-DOS Kermit 2.27 UCB 227.14 IBM PC, + am, + bold=\E[1m, cvvis=\EO\Eq\EG\EvK6, + is2=\EO\Eq\EG\Ev\EJ\EY7 K6 MS Kermit 2.27 UCB 227.14 IBM PC 3-17-85\n, + kf0=\E0, kf1=\E1, kf2=\E2, kf3=\E3, kf4=\E4, kf5=\E5, kf6=\E6, + kf7=\E7, kf8=\E8, kf9=\E9, rev=\E[7m, rmso=\E[m, rmul=\E[m, + sgr0=\E[m, smso=\E[1m, smul=\E[4m, + use=mskermit227, +# This was designed for a VT320 emulator, but it is probably a good start +# at support for the VT320 itself. +# Please send changes with explanations to bug-gnu-emacs@prep.ai.mit.edu. +# (vt320-k3: I added <rmam>/<smam> based on the init string -- esr) +vt320-k3|MS-Kermit 3.00's vt320 emulation, + am, eslok, hs, km, mir, msgr, xenl, + cols#80, it#8, lines#49, pb#9600, vt#3, + acsc=``aaffggjjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~, + bel=^G, blink=\E[5m, bold=\E[1m, civis=\E[?25l, + clear=\E[H\E[J, cmdch=\E, cnorm=\E[?25h, cr=^M, + csr=\E[%i%p1%d;%p1%dr, cub=\E[%p1%dD, cub1=^H, + cud=\E[%p1%dB, cud1=^J, cuf=\E[%p1%dC, cuf1=\E[C, + cup=\E[%i%p1%d;%p1%dH, cuu=\E[%p1%dA, cuu1=\E[A, + dch=\E[%p1%dP, dch1=\E[P, dl=\E[%p1%dM, dl1=\E[M, + dsl=\E[0$~, ech=\E[%p1%dX, ed=\E[J, el=\E[K, + flash=\E[?5h\E[?5l\E[?5h\E[?5l\E[?5h\E[?5l, + fsl=\E[0$}, home=\E[H, hpa=\E[%i%p1%dG, ht=^I, hts=\EH, + ich=\E[%p1%d@, il=\E[%p1%dL, il1=\E[L, ind=^J, + is2=\E>\E F\E[?1l\E[?7h\E[r\E[2$~, kbs=^H, kcub1=\EOD, + kcud1=\EOB, kcuf1=\EOC, kcuu1=\EOA, kdl1=\E[3~, kf0=\E[21~, + kf1=\EOP, kf2=\EOQ, kf3=\EOR, kf4=\EOS, kf6=\E[17~, + kf7=\E[18~, kf8=\E[19~, kf9=\E[20~, kich1=\E[2~, knp=\E[6~, + kpp=\E[5~, mc0=\E[0i, mc4=\E[4i, mc5=\E[5i, nel=^M^J, rc=\E8, + rev=\E[7m, ri=\EM, rin=\E[%p1%dL, rmacs=\E(B, rmam=\E[?7l, + rmir=\E[4l, rmkx=\E[?1l\E>, rmso=\E[27m, rmul=\E[24m, + rs1=\E(B\E)B\E>\E F\E[4;20l\E[12h\E[?1;5;6;38;42l\E[?7;25h\E4i\E?4i\E[m\E[r\E[2$~, + sc=\E7, sgr0=\E[m, smacs=\E(0, smam=\E[?7h, smir=\E[4h, + smkx=\E[?1h\E=, smso=\E[7m, smul=\E[4m, tbc=\E[3g, + tsl=\E[1$}\r\E[K, vpa=\E[%i%p1%dd, +# From: Joseph Gil <yogi@cs.ubc.ca> 13 Dec 1991 +# ACS capabilities from Philippe De Muyter <phdm@info.ucl.ac.be> 30 May 1996 +# (I removed a bogus boolean :mo: and added <msgr>, <smam>, <rmam> -- esr) +vt320-k311|dec vt320 series as defined by kermit 3.11, + am, eslok, hs, mir, msgr, xenl, xon, + cols#80, it#8, lines#24, vt#3, + acsc=``aaffggjjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~, + bel=^G, blink=\E[5m, bold=\E[1m, civis=\E[?25l, + clear=\E[;H\E[2J, cnorm=\E[?25h, cr=^M, + csr=\E[%i%p1%d;%p2%dr, cub=\E[%p1%dD, cub1=^H, + cud=\E[%p1%dB, cud1=^J, cuf=\E[%p1%dC, cuf1=\E[C, + cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA, cuu1=\E[A, + cvvis=\E[?25h, dch=\E[%p1%dP, dch1=\E[P, dl=\E[%p1%dM, + dl1=\E[M, dsl=\E[2$~\r\E[1$}\E[K\E[$}, ed=\E[J, el=\E[K, + flash=\E[?5h\E[?5l, fsl=\E[$}, home=\E[H, ht=^I, hts=\EH, + ich=\E[%p1%d@, il=\E[%p1%dL, il1=\E[L$<3/>, ind=\ED, + is2=\E>\E[?3l\E[?4l\E[?5l\E[?7h\E[?8h\E[1;24r\E[24;1H, + kbs=^H, kcub1=\EOD, kcud1=\EOB, kcuf1=\EOC, kcuu1=\EOA, + kf1=\EOP, kf2=\EOQ, kf3=\EOR, kf4=\EOS, kf6=\E[17~, + kf7=\E[18~, kf8=\E[19~, kf9=\E[20~, lf1=pf1, lf2=pf2, + lf3=pf3, lf4=pf4, nel=^M\ED, rc=\E8, rev=\E[7m, + rf=/usr/share/tabset/vt100, ri=\EM, rmacs=^O, + rmam=\E[?7l, rmir=\E[4l, rmkx=\E[?1l\E>, rmso=\E[27m, + rmul=\E[24m, rs1=\E[?3l, sc=\E7, sgr0=\E[m, smacs=^N, + smam=\E[?7h, smir=\E[4h, smkx=\E[?1h\E=, smso=\E[7m, + smul=\E[4m, tbc=\E[3g, tsl=\E[2$~\E[1$}\E[1;%dH, + +######## NON-ANSI TERMINAL EMULATIONS +# + +#### Avatar +# +# These entries attempt to describe Avatar, a terminal emulation used with +# MS-DOS bulletin-board systems. It was designed to give ANSI-like +# capabilities, but with cheaper (shorter) control sequences. Messy design, +# excessively dependent on PC idiosyncracies, but apparently rather popular +# in the BBS world. +# +# No color support. Avatar doesn't fit either of the Tektronix or HP color +# models that terminfo knows about. An Avatar color attribute is the +# low 7 bits of the IBM-PC display-memory attribute. Bletch. +# +# I wrote these entries while looking at the Avatar spec. I don't have +# the facilities to test them. Let me know if they work, or don't. +# +# Avatar escapes not used by these entries (because maybe you're smarter +# and more motivated than I am and can figure out how to wrap terminfo +# around some of them, and because they are weird enough to be funny): +# level 0: +# ^L -- clear window/reset current attribute to default +# ^V^A%p1%c -- set current color attribute, parameter decodes as follows: +# +# bit: 6 5 4 3 2 1 0 +# | | | | | +# +---+---+ | +---+---+ +# | | | +# | | foreground color +# | foreground intensity +# background color +# level 0+: +# ^V^J%p1%c%p2%c%p3%c%p4%c%p5%c -- scroll (p2,p3) to (p4,p5) up by p1 lines +# ^V^K%p1%c%p2%c%p3%c%p4%c%p5%c -- scroll (p2,p3) to (p4,p5) down by p1 lines +# ^V^L%p1%c%p2%c%p3%c -- clear p2 lines and p3 cols w/attr %p1 +# ^V^M%p1%c%p2%c%p3%c%p4%c -- fill p3 lines & p4 cols w/char p2+attr %p1 +# (^V^L and ^V^M set the current attribute as a side-effect.) +# ^V ^Y <a> [...] <c> -- repeat pattern. <a> specifies the number of bytes +# in the pattern, <c> the number of times the pattern +# should be repeated. If either value is 0, no-op. +# The pattern can contain Avatar console codes, +# including other ^V ^Y patterns. +# level 1: +# ^V^O -- clockwise mode on; turn print direction right each time you +# hit a window edge (yes, really). Turned off by CR +# ^V^P -- no-op +# ^V^Q%c -- query the driver +# ^V^R -- driver reset +# ^V^S -- Sound tone (PC-specific) +# ^V^T -- change highlight at current cursor poition to %c +# ^V^U%p1%c%p2%c -- highlight window <a> with attribute <b> +# ^V^V%p1%c%p2%c%p3%c%p4%c%p5%c +# -- define window +# +# From: Eric S. Raymond <esr@snark.thyrsus.com> 1 Nov 1995 +# (The <blink>/<bold>/<rev>/<smacs>/<smul>/<smso> capabilities exist only to +# tell ncurses that the corresponding highlights exist; it should use <sgr>, +# which is the only method that will actually work for multiple highlights.) +avatar0|avatar terminal emulator level 0, + am, bce, msgr, + cols#80, it#8, lines#25, + blink=^A^V\177, bold=^V^A^P, cr=^M, cub1=^V^E, cud1=^V^D, + cuf1=^V^F, cup=\026\010%p1%c%p2%c, cuu1=^V^C, el=^V^G, + ind=^J, invis=^V^A\0, rep=\031%p1%c%p2%d, rev=^A^Vp, + rs2=^L, + sgr=\026\001%{0}%?%p1%t%{112}%|%;%?%p2%t%{1}%|%;%?%p3%t%{112}%|%;%?%p4%t{128}%|%;%?%p6%t%{16}%|%;, + sgr0=^V^A^G, smacs=, smso=^A^Vp, smul=^V^A, + use=klone+acs, +# From: Eric S. Raymond <esr@snark.thyrsus.com> 1 Nov 1995 +avatar0+|avatar terminal emulator level 0+, + dch1=^V^N, rmir=\026\n\0\0\0\0, smir=^V^I, use=avatar0, +# From: Eric S. Raymond <esr@snark.thyrsus.com> 1 Nov 1995 +avatar|avatar1|avatar terminal emulator level 1, + civis=^V'^B, cnorm=^V'^A, cvvis=^V^C, dl1=^V-, il1=^V+, + rmam=^V", rmir=^V^P, smam=^V$, + use=avatar0+, + +#### RBcomm +# +# RBComm is a lean and mean terminal emulator written by the Interrupt List +# maintainer, Ralf Brown. It was fairly popular in the late DOS years (early +# '90s), especially in the BBS world, and still has some loyal users due to +# its very small memory footprint and to a cute macro language. +rbcomm|IBM PC with RBcomm and EMACS keybindings, + am, bw, mir, msgr, xenl, + cols#80, it#8, lines#25, + bel=^G, blink=\E[5m, bold=\E[1m, cbt=\E[Z, civis=\E[?25l, + clear=^L, cnorm=\E[?25h, cr=^M, csr=\E[%i%p1%d;%p2%dr, + cub1=^H, cud1=^C, cuf1=^B, + cup=\037%p2%{32}%+%c%p1%{32}%+%c, cuu1=^^, + cvvis=\E[?25h, dch1=^W, dl=\E[%p1%dM, dl1=^Z, + ech=\E[%p1%dX, ed=^F5, el=^P^P, ht=^I, il=\E[%p1%dL, il1=^K, + ind=\ED, invis=\E[8m, + is2=\017\035\E(B\E)0\E[?7h\E[?3l\E[>8g, kbs=^H, + kcub1=^B, kcud1=^N, kcuf1=^F, kcuu1=^P, khome=^A, nel=^M\ED, + rc=\E8, rep=\030%p1%c%p2%c, rev=^R, ri=\EM, rmcup=, rmdc=, + rmir=^], rmkx=\E>, rmso=^U, rmul=^U, + rs1=\017\E(B\E)0\025\E[?3l\E[>8g, sc=\E7, sgr0=\E[m, + smcup=, smdc=, smir=^\, smkx=\E=, smso=^R, smul=^T, +rbcomm-nam|IBM PC with RBcomm without autowrap, + am@, + bel=^G, cr=^M, cud1=^J, ht=^I, ind=^J, + is2=\017\035\E(B\E)0\E[?7l\E[?3l\E[>8g, kbs=^H, + kcub1=^H, kcud1=^J, nel=^M^J, + use=rbcomm, +rbcomm-w|IBM PC with RBcomm in 132 column mode, + cols#132, + bel=^G, cr=^M, cud1=^J, ht=^I, ind=^J, + is2=\017\035\E(B\E)0\E[?7h\E[?3h\E[>8g, kbs=^H, + kcub1=^H, kcud1=^J, nel=^M^J, + use=rbcomm, + +######## OLDER TERMINAL TYPES +# +# This section is devoted to older commercial terminal brands that are now +# discontinued, but known to be still in use or represented by emulations. +# + +#### AT&T (att, tty) +# +# This section also includes Teletype-branded VDTs. +# +# The AT&T/Teletype terminals group was sold to SunRiver Data Systems (now +# Boundless Technologies); for details, see the header comment on the ADDS +# section. +# +# These are AT&T's official terminfo entries. All-caps aliases have been +# removed. +# +att2300|sv80|AT&T 2300 Video Information Terminal 80 column mode, + am, eo, mir, msgr, xon, + cols#80, it#8, lines#24, + bel=^G, clear=\E[H\E[J, cr=^M, cub=\E[%p1%dD, cub1=^H, + cud=\E[%p1%dB, cud1=^J, cuf=\E[%p1%dC, cuf1=\E[C, + cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA, cuu1=\E[A, + dch=\E[%p1%dP, dch1=\E[P, dl=\E[%p1%dM, dl1=\E[M, ed=\E[J, + el=\E[K, el1=\E[1K, home=\E[H, ht=^I, ich=\E[%p1%d@, + il=\E[%p1%dL, il1=\E[L, ind=^J, kbs=^H, kcbt=\E[Z, kclr=\E[J, + kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A, kdch1=\E[P, + kdl1=\E[M, kf1=\E[1r, kf10=\E[10r, kf11=\E[11r, + kf12=\E[12r, kf13=\E[13r, kf14=\E[14r, kf15=\E[15r, + kf16=\E[16r, kf2=\E[2r, kf3=\E[3r, kf4=\E[4r, kf5=\E[5r, + kf6=\E[6r, kf7=\E[7r, kf8=\E[8r, kf9=\E[9r, khome=\E[H, + kich1=\E[@, kil1=\E[L, mc0=\E[0i, mc4=\E[4i, mc5=\E[5i, + rev=\E[7m, rmir=\E[4l, rmso=\E[m, sgr0=\E[m, smir=\E[4h, + smso=\E[7m, +att2350|AT&T 2350 Video Information Terminal 80 column mode, + mc0@, mc4@, mc5@, + use=att2300, + +# Must setup RETURN KEY - CR, REC'VD LF - INDEX. +# Seems upward compatible with vt100, plus ins/del line/char. +# On sgr, the protection parameter is ignored. +# No check is made to make sure that only 3 parameters are output. +# standout= reverse + half-intensity = 3 | 5. +# bold= reverse + underline = 2 | 3. +# note that half-bright blinking doesn't look different from normal blinking. +# NOTE:you must program the function keys first, label second! +# (att4410: a BSD entry has been seen with the following capabilities: +# <is2=\E[?6l>, <kf1=\EOc>, <kf2=\EOd>, <kf3=\EOe>, <kf4=\EOg>, +# <kf6=\EOh>, <kf7=\EOi>, <kf8=\EOj>, -- esr) +att5410v1|att4410v1|tty5410v1|AT&T 4410/5410 80 columns - version 1, + am, hs, mir, msgr, xon, + cols#80, it#8, lh#2, lines#24, lw#8, nlab#8, wsl#80, + acsc=++\,\,--..00``aaffgghhjjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~, + bel=^G, blink=\E[5m, bold=\E[2;7m, clear=\E[H\E[J, cr=^M, + csr=\E[%i%p1%d;%p2%dr, cub1=^H, cud1=\E[B, cuf1=\E[C, + cup=\E[%i%p1%d;%p2%dH, cuu1=\E[A, dch1=\E[P, dim=\E[2m, + dl1=\E[M, ed=\E[J, el=\E[K, fsl=\E8, home=\E[H, ht=^I, + ich1=\E[@, il1=\E[L, ind=^J, invis=\E[8m, is1=\E[?3l\E)0, + is3=\E[1;03q f1 \EOP\E[2;03q f2 \EOQ\E[3;03q f3 \EOR\E[4;03q f4 \EOS\E[5;03q f5 \EOT\E[6;03q f6 \EOU\E[7;03q f7 \EOV\E[8;03q f8 \EOW, + kbs=^H, kclr=\E[2J, kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C, + kcuu1=\E[A, kf1=\EOP, kf2=\EOQ, kf3=\EOR, kf4=\EOS, kf5=\EOT, + kf6=\EOU, kf7=\EOV, kf8=\EOW, khome=\E[H, kll=\E[24;1H, + ll=\E[24H, nel=^M^J, + pfx=\E[%p1%1d;%p2%l%2.2dq f%p1%1d %p2%s, + pln=\E[%p1%d;00q%p2%:-16s, rc=\E8, rev=\E[7m, ri=\EM, + rmacs=^O, rmso=\E[m, rmul=\E[m, rs2=\Ec\E[?3l\E[2;0y, + sc=\E7, + sgr=\E[0%?%p1%p5%|%t;2%;%?%p2%p6%|%t;4%;%?%p4%t;5%;%?%p3%p1%|%p6%|%t;7%;%?%p7%t;8%;m%?%p9%t\016%e\017%;, + sgr0=\E[m\017, smacs=^N, smso=\E[7m, smul=\E[4m, + tsl=\E7\E[25;%p1%{1}%+%dH, + +att4410v1-w|att5410v1-w|tty5410v1-w|AT&T 4410/5410 132 columns - version 1, + cols#132, wsl#132, + is1=\E[?3h\E)0, rs2=\Ec\E[?3h\E[2;0y, use=att5410v1, + +att4410|att5410|tty5410|AT&T 4410/5410 80 columns - version 2, + pfx=\E[%p1%d;%p2%l%02dq f%p1%d %p2%s, + use=att5410v1, + +att5410-w|att4410-w|4410-w|tty5410-w|5410-w|AT&T 4410/5410 in 132 column mode, + cols#132, wsl#132, + is1=\E[?3h\E)0, rs2=\Ec\E[?3h\E[2;0y, use=att4410, + +# 5410 in terms of a vt100 +# (v5410: added <rmam>/<smam> based on init string -- esr) +v5410|att5410 in terms of a vt100, + am, mir, msgr, xon, + cols#80, it#8, lines#24, vt#3, + acsc=``aaffggjjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~, + bel=^G, blink=\E[5m$<2>, bold=\E[1m$<2>, + clear=\E[H\E[J$<50>, cr=^M, csr=\E[%i%p1%d;%p2%dr, + cub1=^H, cud1=^J, cuf1=\E[C$<2>, + cup=\E[%i%p1%d;%p2%dH$<5>, cuu1=\E[A$<2>, dch1=\E[P, + dl1=\E[M, ed=\E[J$<50>, el=\E[K$<3>, el1=\E[1K$<3>, + enacs=\E(B\E)0, home=\E[H, ht=^I, hts=\EH, ich1=\E[@, + il1=\E[L, ind=^J, ka1=\EOq, ka3=\EOs, kb2=\EOr, kbs=^H, + kc1=\EOp, kc3=\EOn, kcub1=\EOD, kcud1=\EOB, kcuf1=\EOC, + kcuu1=\EOA, kent=\EOM, kf0=\EOy, kf1=\EOP, kf10=\EOx, + kf2=\EOQ, kf3=\EOR, kf4=\EOS, kf5=\EOt, kf6=\EOu, kf7=\EOv, + kf8=\EOl, kf9=\EOw, rc=\E8, rev=\E[7m$<2>, ri=\EM$<5>, + rmacs=^O, rmam=\E[?7l, rmkx=\E[?1l\E>, rmso=\E[m$<2>, + rmul=\E[m$<2>, rs2=\E>\E[?3l\E[?4l\E[?5l\E[?7h\E[?8h, + sc=\E7, + sgr=\E[0%?%p1%p6%|%t;1%;%?%p2%t;4%;%?%p1%p3%|%t;7%;%?%p4%t;5%;m%?%p9%t\016%e\017%;, + sgr0=\E[m\017$<2>, smacs=^N, smam=\E[?7h, smkx=\E[?1h\E=, + smso=\E[1;7m$<2>, smul=\E[4m$<2>, tbc=\E[3g, + +# +# Teletype Model 5420 -- A souped up 5410, with multiple windows, +# even! the 5420 has three modes: scroll, window or page mode +# this terminfo should work in scroll or window mode, but doesn't +# take advantage of any of the differences between them. +# +# Has memory below (2 lines!) +# 3 pages of memory (plus some spare) +# The 5410 sequences for <cup>, <cvvis>, <dch>, <dl>, <ech>, <flash>, <home>, +# <hpa>, <hts> would work for these, but these work in both scroll and window +# mode... Unset insert character so insert mode works +# <is1> sets 80 column mode, +# <is2> escape sequence: +# 1) turn off all fonts +# 2) function keys off, keyboard lock off, control display off, +# insert mode off, erasure mode off, +# 3) full duplex, monitor mode off, send graphics off, nl on lf off +# 4) reset origin mode +# 5) set line wraparound +# 6) exit erasure mode, positional attribute mode, and erasure extent mode +# 7) clear margins +# 8) program ENTER to transmit ^J, +# We use \212 to program the ^J because a bare ^J will get translated by +# UNIX into a CR/LF. The enter key is needed for AT&T uOMS. +# 1 2 3 4 5 6 7 8 +# <is3> set screen color to black, +# No representation in terminfo for the delete word key: kdw1=\Ed +# Key capabilities assume the power-up send sequence... +# This <rmcup> is not strictly necessary, but it helps maximize +# memory usefulness: <rmcup=\Ez>, +# Alternate sgr0: <sgr0=\E[m\EW^O>, +# Alternate sgr: <sgr=\E[%?%p1%t2;7%;%?%p2%t;4%;%?%p3%t;7%;%?%p4%t;5%;%?%p5%t;2%;%?%p7%t;8%;m%?%p8%t\EV%;%?%p9%t^N%e^O%;>, +# smkx programs the SYS PF keys to send a set sequence. +# It also sets up labels f1, f2, ..., f8, and sends edit keys. +# This string causes them to send the strings <kf1>-<kf8> +# when pressed in SYS PF mode. +# (att4415: I added <rmam>/<smam> based on the init string -- esr) +att4415|tty5420|att5420|AT&T 4415/5420 80 cols, + db, mir, xon, + lh#2, lm#78, lw#8, nlab#8, wsl#55, + cbt=\E[Z, clear=\E[x\E[J, cnorm=\E[11;0j, cub=\E[%p1%dD, + cud=\E[%p1%dB, cuf=\E[%p1%dC, cup=\E[%i%p1%d;%p2%dx, + cuu=\E[%p1%dA, cvvis=\E[11;1j, dch=\E[%p1%dP, + dl=\E[%p1%dM, ech=\E[%p1%ds\E[%p1%dD, + flash=\E[?5h$<200>\E[?5l, home=\E[x, + hpa=\E[%p1%{1}%+%dG, hts=\EH, ich=\E[%p1%d@, ich1@, + il=\E[%p1%dL, indn=\E[%p1%dE, is1=\E[?3l$<100>, + is2=\E[m\017\E[1;2;3;4;6l\E[12;13;14;20l\E[?6;97;99l\E[?7h\E[4i\Ex\E[21;1j\212, + is3=\E[?5l, kbeg=\Et, kcbt=\E[Z, kdch1=\E[P, kdl1=\E[M, + kel=\E[2K, kend=\Ez, kent=\Eent, kf1=\EOc, kf2=\EOd, + kf3=\EOe, kf4=\EOf, kf5=\EOg, kf6=\EOh, kf7=\EOi, kf8=\EOj, + kich1=\E[4h, kil1=\E[L, kind=\E[T, kll=\Eu, knp=\E[U, + kpp=\E[V, kri=\E[S, lf1=F1, lf2=F2, lf3=F3, lf4=F4, lf5=F5, + lf6=F6, lf7=F7, lf8=F8, ll=\Ew, mc0=\E[?2i, mc4=\E[?9i, + mc5=\E[?4i, mrcup=\E[%i%p1%d;%p2%dt, + pfx=\E[%p1%d;%p2%l%02dq F%p1%d %p2%s, + pln=\E[%p1%d;0;0;0q%p2%:-16.16s, prot=\EV, + rin=\E[%p1%dF, rmam=\E[?7l, rmir=\E[4l, + rmkx=\E[19;0j\E[21;1j\212, rmln=\E|, + sgr=\E[0%?%p1%p5%|%t;2%;%?%p2%p6%|%t;4%;%?%p4%t;5%;%?%p3%p1%|%p6%|%t;7%;%?%p7%t;8%;m%?%p9%t\016%e\017%;, + sgr0=\E[m\017, smam=\E[?7h, smir=\E[4h, + smkx=\E[19;1j\E[21;4j\Eent, smln=\E~, tbc=\E[3g, + tsl=\E7\E[25;%p1%{8}%+%dH, vpa=\E[%p1%{1}%+%dd, + use=att4410, + +att4415-w|tty5420-w|att5420-w|AT&T 4415/5420 132 cols, + cols#132, lm#54, wsl#97, + is1=\E[?3h$<100>, use=att4415, + +att4415-rv|tty5420-rv|att5420-rv|AT&T 4415/5420 80 cols/rv, + flash=\E[?5l$<200>\E[?5h, is3=\E[?5h, + use=att4415, + +att4415-w-rv|tty5420-w-rv|att5420-w-rv|AT&T 4415/5420 132 cols/rv, + cols#132, lm#54, wsl#97, + flash=\E[?5l$<200>\E[?5h, is1=\E[?3h$<100>, is3=\E[?5h, use=att4415, + +# Note that this mode permits programming USER PF KEYS and labels +# However, when you program user pf labels you have to reselect +# user pf keys to make them appear! +att4415+nl|tty5420+nl|att5420+nl|generic AT&T 4415/5420 changes for not changing labels, + kf1@, kf2@, kf3@, kf4@, kf5@, kf6@, kf7@, kf8@, + pfx=\E[%p1%d;%p2%l%02d;0;1q F%p1%d %p2%s, + pln=\E[%p1%d;0;0;1q%p2%:-16.16s, + +att4415-nl|tty5420-nl|att5420-nl|AT&T 4415/5420 without changing labels, + kf1@, kf2@, kf3@, kf4@, kf5@, kf6@, kf7@, kf8@, + use=att4415+nl, use=att4415, + +att4415-rv-nl|tty5420-rv-nl|att5420-rv-nl|AT&T 4415/5420 reverse video without changing labels, + kf1@, kf2@, kf3@, kf4@, kf5@, kf6@, kf7@, kf8@, + use=att4415+nl, use=att4415-rv, + +att4415-w-nl|tty5420-w-nl|att5420-w-nl|AT&T 4415/5420 132 cols without changing labels, + kf1@, kf2@, kf3@, kf4@, kf5@, kf6@, kf7@, kf8@, + use=att4415+nl, use=att4415-w, + +att4415-w-rv-n|tty5420-w-rv-n|att5420-w-rv-n|AT&T 4415/5420 132 cols reverse without changing labels, + kf1@, kf2@, kf3@, kf4@, kf5@, kf6@, kf7@, kf8@, + use=att4415+nl, use=att4415-w-rv, + +att5420_2|AT&T 5420 model 2 80 cols, + am, db, hs, mir, msgr, xon, + cols#80, it#8, lh#2, lines#24, lm#78, lw#8, nlab#8, wsl#55, + acsc=``aaffggjjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~, + blink=\E[5m, cbt=\E[1Z, clear=\EH\EJ, cnorm=\E[11;0j, + cr=\EG, csr=\E[%i%p1%d;%p2%dr, cub=\E[%p1%dD, cub1=^H, + cud1=\E[1B, cuf=\E[%p1%dC, cuf1=\E[1C, + cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA, cvvis=\E[11;1j, + dch=\E[%p1%dP, dch1=\E[P, dim=\E[2m, dl=\E[%p1%dM, + dl1=\E[M, ech=\E[%p1%ds\E[%p1%dD, ed=\E[0J, el=\E[0K, + el1=\E[1K, flash=\E[?5h$<200>\E[?5l, fsl=\E8, home=\E[H, + hpa=\E[%p1%{1}%+%dG, ht=^I, hts=\EH, ich=\E[%p1%d@, + ich1=\E[@, il=\E[%p1%dL, il1=\E[L, ind=^J, indn=\E[%p1%dE, + invis=\E[8m, + is1=\E[0;23r\Ex\Ey\E[2;0j\E[3;3j\E[4;0j\E[5;0j\E[6;0j\E[7;0j\E[8;0j\E[9;1j\E[10;0j\E[15;0j\E[16;1j\E[19;0j\E[20;1j\E[29;0j\E[1;24r, + kbeg=\Et, kbs=^H, kcbt=\E[Z, kclr=\E[2J, kcub1=\E[D, + kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A, kdch1=\E[P, kdl1=\E[M, + kel=\E[2K, kend=\Ez, kent=^J, kf1=\EOc, kf2=\EOd, kf3=\EOe, + kf4=\EOf, kf5=\EOg, kf6=\EOh, kf7=\EOi, kf8=\EOj, khome=\E[H, + kich1=\E[4h, kil1=\E[L, kind=\E[T, kll=\Eu, knp=\E[U, + kpp=\E[V, kri=\E[S, lf1=F1, lf2=F2, lf3=F3, lf4=F4, lf5=F5, + lf6=F6, lf7=F7, lf8=F8, ll=\Ew, mc0=\E[?;2i, mc4=\E[4i, + mc5=\E[5i, mrcup=\E[%i%p1%d;%p2%dt, nel=^M^J, + pfx=\E[%p1%d;%p2%l%02dq F%p1%d %p2%s\E~, + pln=\E[%p1%d;0;0;0q%p2%:-16.16s\E~, prot=\EV, rc=\E8, + rev=\E[7m, ri=\EM, rin=\E[%p1%dF, rmacs=^O, rmkx=\E[19;0j, + rmln=\E|, rmso=\E[m, rmul=\E[m, rs2=\Ec\E[?3l\E[2;0y, + sc=\E7, + sgr=\E[0%?%p1%p5%|%t;2%;%?%p2%p6%|%t;4%;%?%p4%t;5%;%?%p3%p1%|%p6%|%t;7%;%?%p7%t;8%;m%?%p9%t\016%e\017%;, + sgr0=\E[m\017, smacs=^N, smkx=\E[19;1j, smln=\E~, + smso=\E[7m, smul=\E[4m, tbc=\E[3g, + tsl=\E7\E[25;%p1%{8}%+%dH, vpa=\E[%p1%{1}%+%dd, +att5420_2-w|AT&T 5420 model 2 in 132 column mode, + cols#132, + is1=\E[0;23r\Ex\Ey\E[2;0j\E[3;3j\E[4;0j\E[5;1j\E[6;0j\E[7;0j\E[8;0j\E[9;1j\E[10;0j\E[15;0j\E[16;1j\E[19;0j\E[20;1j\E[29;0j\E[1;24r, use=att5420_2, + +att4418|att5418|AT&T 5418 80 cols, + am, xon, + cols#80, lines#24, + acsc=``aaffggjjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~, + bel=^G, blink=\E[5m, clear=\E[H\E[2J, cr=^M, cub=\E[%p1%dD, + cub1=\E[D, cud=\E[%p1%dB, cud1=\E[B, cuf=\E[%p1%dC, + cuf1=\E[C, cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA, + cuu1=\E[A, dch=\E[%p1%dP, dch1=\E[1P, dim=\E[2m, + dl=\E[%p1%dM, dl1=\E[M, ed=\E[0J, el=\E[0K, home=\E[H, + ich=\E[%p1%d@, ich1=\E[1@, il=\E[%p1%dL, il1=\E[1L, ind=^J, + is1=\E[?3l, is2=\E)0\E?6l\E?5l, kclr=\E[%, kcub1=\E@, + kcud1=\EU, kcuf1=\EA, kcuu1=\ES, kent=\E[, kf1=\E[h, + kf10=\E[m, kf11=\E[n, kf12=\E[o, kf13=\E[H, kf14=\E[I, + kf15=\E[J, kf18=\E[K, kf19=\E[L, kf2=\E[i, kf20=\E[E, + kf21=\E[_, kf22=\E[M, kf23=\E[N, kf24=\E[O, kf3=\E[j, + kf6=\E[k, kf7=\E[l, kf8=\E[f, kf9=\E[w, khome=\Ec, rc=\E8, + rev=\E[7m, rmacs=^O, rmso=\E[m, rmul=\E[m, sc=\E7, + sgr0=\E[m\017, smacs=^N, smso=\E[7m, smul=\E[4m, +att4418-w|att5418-w|AT&T 5418 132 cols, + cols#132, + is1=\E[?3h, use=att5418, + +att4420|tty4420|teletype 4420, + da, db, eo, msgr, ul, xon, + cols#80, lines#24, lm#72, + bel=^G, clear=\EH\EJ, cr=\EG, cub1=\ED, cud1=\EB, cuf1=\EC, + cup=\EY%p1%{32}%+%c%p2%{32}%+%c, cuu1=\EA, dch1=\EP, + dl1=\EM, ed=\EJ, el=\Ez, home=\EH, il1=\EL, ind=\EH\EM\EY7\s, + kcbt=\EO, kclr=\EJ, kcub1=^H, kcud1=\EB, kcuf1=\EC, + kcuu1=\EA, kdch1=\EP, kdl1=\EM, kf0=\EU, kf3=\E@, khome=\EH, + kich1=\E\^, kil1=\EL, kind=\ES, kri=\ET, + lf0=segment advance, lf3=cursor tab, rmdc@, rmso=\E~, + rmul=\EZ, smdc@, smso=\E}, smul=\E\\, + +# The following is a terminfo entry for the Teletype 4424 +# asynchronous keyboard-display terminal. It supports +# the vi editor. The terminal must be set up as follows, +# +# HIGHLIGHT DEFINITION 3-TONE +# DISPLAY FUNCTION GROUP III +# +# The second entry below provides limited (a la adm3a) +# operation under GROUP II. +# +# This must be used with DISPLAY FUNCTION GROUP I or III +# and HIGHLIGHT DEFINITION 3-TONE +# The terminal has either bold or blink, depending on options +# +# (att4424: commented out <smcup>=\E[1m, we don't need bright locked on -- esr) +att4424|tty4424|teletype 4424, + am, xon, + cols#80, lines#24, + acsc=``aaffggjjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~, + bel=^G, blink=\E3, bold=\E3, cbt=\EO, clear=\E[H\E[2J, cr=^M, + csr=\E[%i%p1%d;%p2%dr, cub=\E[%p1%dD, cub1=^H, + cud=\E[%p1%dB, cud1=\EB, cuf=\E[%p1%dC, cuf1=\EC, + cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA, cuu1=\EA, + dch=\E[%p1%dP, dch1=\EP, dim=\EW, dl=\E[%p1%dM, dl1=\EM, + ed=\EJ, el=\Ez, home=\E[H, ht=^I, hts=\EH, ich=\E[%p1%d@, + ich1=\E\^, il=\E[%p1%dL, il1=\EL, ind=^J, is2=\E[20l\E[?7h, + kbs=^H, kclr=\EJ, kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C, + kcuu1=\E[A, kf1=\EOP, kf2=\EOQ, kf3=\EOR, kf4=\EOS, + khome=\E[H, nel=\EE, rev=\E}, ri=\ET, rmacs=\E(B, rmso=\E~, + rmul=\EZ, + sgr=\E[%?%p1%t7%;%?%p2%t;4%;%?%p3%t;7%;%?%p6%t;1%;%?%p6%p4%|%t;5%;%?%p5%t;0%;m, + sgr0=\EX\E~\EZ\E4\E(B, smacs=\E(0, smso=\E}, smul=\E\\, + tbc=\EF, + +att4424-1|tty4424-1|teletype 4424 in display function group I, + kclr@, kcub1=\ED, kcud1=\EB, kcuf1=\EC, kcuu1=\EA, khome@, + use=att4424, + +# This entry is not one of AT&T's official ones, it was translated from the +# 4.4BSD termcap file. The highlight strings are different from att4424. +# I have no idea why this is -- older firmware version, maybe? +# The following two lines are the comment originally attached to the entry: +# This entry appears to avoid the top line - I have no idea why. +# From: jwb Wed Mar 31 13:25:09 1982 remote from ihuxp +att4424m|tty4424m|teletype 4424M, + am, da, db, mir, + cols#80, it#8, lines#23, + bel=^G, clear=\E[2;H\E[J, cr=^M, cub1=^H, cud1=^J, cuf1=\E[C, + cup=\E[%i%p1%2d;%p2%2dH\E[B, cuu1=\E[A, dch1=\EP, + dl1=\EM, el=\E[K, ht=^I, ich1=\E\^, il1=\EL, ind=^J, ip=$<2/>, + is2=\E[m\E[2;24r, kbs=^H, kcub1=\E[D, kcud1=\E[B, + kcuf1=\E[C, kcuu1=\E[A, kf1=\EOP, kf2=\EOQ, kf3=\EOR, + kf4=\EOS, khome=\E[H, nel=^M^J, ri=\ET, rmso=\E[m, rmul=\E[m, + sgr0=\E[m, smso=\E[7m, smul=\E[4m, + +# The Teletype 5425 is really version 2 of the Teletype 5420. It +# is quite similar, except for some minor differences. No page +# mode, for example, so all of the <cup> sequences used above have +# to change back to what's being used for the 5410. Many of the +# option settings have changed their numbering as well. +# +# This has been tested on a preliminary model. +# +# (att5425: added <rmam>/<smam> based on the init string -- esr) +att5425|tty5425|att4425|AT&T 4425/5425, + am, da, db, hs, mir, msgr, xenl, xon, + cols#80, it#8, lh#2, lines#24, lm#78, lw#8, nlab#8, wsl#55, + acsc=``aaffggjjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~, + bel=^G, blink=\E[5m, bold=\E[2;7m, cbt=\E[Z, + clear=\E[H\E[J, cnorm=\E[12;0j, cr=^M, + csr=\E[%i%p1%d;%p2%dr, cub=\E[%p1%dD, cub1=^H, + cud=\E[%p1%dB, cud1=^J, cuf=\E[%p1%dC, cuf1=\E[C, + cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA, cuu1=\E[A, + cvvis=\E[12;1j, dch=\E[%p1%dP, dch1=\E[P, dim=\E[2m, + dl=\E[%p1%dM, dl1=\E[M, ech=\E[%p1%ds\E[%p1%dD, ed=\E[J, + el=\E[K, el1=\E[1K, enacs=\E(B\E)0, + flash=\E[?5h$<200>\E[?5l, fsl=\E8, home=\E[H, + hpa=\E[%p1%{1}%+%dG, ht=^I, hts=\EH, ich=\E[%p1%d@, + il=\E[%p1%dL, il1=\E[L, ind=^J, indn=\E[%p1%dE, + invis=\E[8m, is1=\E<\E[?3l$<100>, + is2=\E[m\017\E[1;2;3;4;6l\E[12;13;14;20l\E[?6;97;99l\E[?7h\E[4i\Ex\E[25;1j\212, + is3=\E[?5l, kbeg=\Et, kbs=^H, kcbt=\E[Z, kclr=\E[J, + kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A, kdch1=\E[P, + kdl1=\E[M, kel=\E[2K, kend=\Ez, kent=\Eent, kf1=\EOc, + kf2=\EOd, kf3=\EOe, kf4=\EOf, kf5=\EOg, kf6=\EOh, kf7=\EOi, + kf8=\EOj, khome=\E[H, kich1=\E[4h, kil1=\E[L, kind=\E[T, + kri=\E[S, ll=\E[24H, mc0=\E[?2i, mc4=\E[?9i, mc5=\E[?4i, + nel=^M^J, + pfx=\E[%p1%d;%p2%l%02dq F%p1%1d %p2%s, + pln=\E[%p1%d;0;0;0q%p2%:-16.16s, prot=\EV, rc=\E8, + rev=\E[7m, ri=\EM, rin=\E[%p1%dF, rmacs=^O, rmam=\E[?7l, + rmir=\E[4l, rmkx=\E[21;0j\E[25;1j\212, rmln=\E|, + rmso=\E[m, rmul=\E[m, rs2=\Ec\E[?3l\E[2;0y, sc=\E7, + sgr=\E[0%?%p1%p5%|%t;2%;%?%p2%p6%|%t;4%;%?%p4%t;5%;%?%p3%p1%|%p6%|%t;7%;%?%p7%t;8%;m%?%p9%t\016%e\017%;, + sgr0=\E[m\017, smacs=^N, smam=\E[?7h, smir=\E[4h, + smkx=\E[21;1j\E[25;4j\Eent\E~, smln=\E~, smso=\E[7m, + smul=\E[4m, tbc=\E[3g, tsl=\E7\E[25;%p1%{8}%+%dH, + vpa=\E[%p1%{1}%+%dd, + +att5425-nl|tty5425-nl|att4425-nl|AT&T 4425/5425 80 columns no labels, + smkx=\E[21;1j\E[25;4j\Eent, + use=att4425, + +att5425-w|att4425-w|tty5425-w|teletype 4425/5425 in 132 column mode, + cols#132, lm#54, wsl#97, + is1=\E[?3h$<100>, use=tty5425, + +# (att4426: his had bogus capabilities: :ri=\EM:, :ri=\E[1U:. +# I also added <rmam>/<smam> -- esr) +att4426|tty4426|teletype 4426S, + am, da, db, xon, + cols#80, lines#24, lm#48, + acsc=``aaffggjjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~, + bel=^G, bold=\E[5m, clear=\E[H\E[2J\E[1U\E[H\E[2J\E[1V, + cr=^M, cub=\E[%p1%dD, cub1=\E[D, cud=\E[%p1%dB, cud1=\E[B, + cuf=\E[%p1%dC, cuf1=\E[C, cup=\E[%i%p1%d;%p2%dH, + cuu=\E[%p1%dA, cuu1=\EA, dch=\E[%p1%dP, dch1=\EP, + dl=\E[%p1%dM, dl1=\E[M, ed=\E[J, el=\E[0K, home=\E[H, + hpa=\E[%p1%dG, ht=^I, hts=\E1, ich=\E[%p1%d@, ich1=\E\^, + il=\E[%p1%dL, il1=\EL, ind=^J, indn=\E[%p1%dS, + is1=\Ec\E[?7h, is2=\E[m\E[1;24r, kbs=^H, kcbt=\EO, + kclr=\E[2J, kcub1=\ED, kcud1=\EB, kcuf1=\EC, kcuu1=\EA, + kf1=\EOP, kf2=\EOQ, kf3=\EOR, kf4=\EOS, kf5=\EOT, kf6=\EOU, + kf7=\EOV, kf8=\EOW, khome=\E[H, kll=\E[24;1H, ll=\E[24H, + nel=^M^J, rc=\E8, rev=\E[7m, ri=\ET, rin=\E[%p1%dT, + rmacs=\E(B, rmam=\E[?7l, rmso=\E[m, rmul=\E[m, + rs2=\Ec\E[?3l\E[2;0y, sc=\E7, sgr0=\E[m\E(B, smacs=\E(0, + smam=\E[?7h, smso=\E[5m, smul=\E[4m, tbc=\E[3g, + vpa=\E[%p1%dd, + +# Terminfo entry for the AT&T 510 A Personal Terminal +# Function keys 9 - 16 are available only after the +# screen labeled (soft keys/action blocks) are labeled. Function key +# 9 corresponds to the leftmost touch target on the screen, +# function key 16 corresponds to the rightmost. +# +# This entry is based on one done by Ernie Rice at Summit, NJ and +# changed by Anne Gallup, Skokie, IL, ttrdc!anne +att510a|bct510a|AT&T 510A Personal Terminal, + am, mir, msgr, xenl, xon, + cols#80, lh#2, lines#24, lw#7, nlab#8, + acsc=+g\,h-f.e`bhrisjjkkllmmnnqqttuuvvwwxx{{||}}~~, + bel=^G, blink=\E[5m, bold=\E[2;7m, cbt=\E[Z, + civis=\E[11;0|, clear=\E[H\E[J, cnorm=\E[11;3|, cr=^M, + cub=\E[%p1%dD, cub1=^H, cud=\E[%p1%dB, cud1=\E[1B, + cuf=\E[%p1%dC, cuf1=\E[C, cup=\E[%i%p1%d;%p2%dH, + cuu=\E[%p1%dA, cuu1=\E[A, cvvis=\E[11;2|, dch=\E[%p1%dP, + dch1=\E[P, dim=\E[2m, dl=\E[%p1%dM, dl1=\E[M, ed=\E[0J, + el=\E[0K, el1=\E[1K, enacs=\E(B\E)1, ff=^L, home=\E[H, ht=^I, + hts=\EH, il=\E[%p1%dL, il1=\E[L, ind=^J, is1=\E(B\E)1\E[2l, + is3=\E[21;1|\212, kLFT=\E[u, kRIT=\E[v, kbs=^H, kcbt=\E[Z, + kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A, kf1=\EOm, + kf10=\EOd, kf11=\EOe, kf12=\EOf, kf13=\EOg, kf14=\EOh, + kf15=\EOi, kf16=\EOj, kf2=\EOV, kf3=\EOu, kf4=\ENj, kf5=\ENe, + kf6=\ENf, kf7=\ENh, kf8=\E[H, kf9=\EOc, kind=\E[S, kri=\E[T, + mc0=\E[0i, mc4=\E[?8i, mc5=\E[?4i, nel=\EE, + pln=\E[%p1%dp%p2%:-16s, rc=\E8, rev=\E[7m, ri=\EM, + rmacs=^O, rmkx=\E[19;0|, rmso=\E[m, rmul=\E[m, sc=\E7, + sgr=\E[0%?%p5%p6%|%t;2%;%?%p2%t;4%;%?%p4%t;5%;%?%p3%p1%|%p6%|%t;7%;m%?%p9%t\016%e\017%;, + sgr0=\E[m\017, smacs=^N, smkx=\E[19;1|, smso=\E[7m, + smul=\E[4m, tbc=\E[3g, + +# Terminfo entry for the AT&T 510 D Personal Terminal +# Function keys 9 through 16 are accessed by bringing up the +# system blocks. +# Function key 9 corresponds to the leftmost touch target on the screen, +# function key 16 corresponds to the rightmost. +# +# There are problems with soft key labeling. These are due to +# strangenesses in the native terminal that are impossible to +# describe in a terminfo. +att510d|bct510d|AT&T 510D Personal Terminal, + am, da, db, mir, msgr, xenl, xon, + cols#80, lh#2, lines#24, lm#48, lw#7, nlab#8, + acsc=+g\,h-f.e`bhrisjjkkllmmnnqqttuuvvwwxx{{||}}~~, + bel=^G, blink=\E[5m, bold=\E[2;7m, cbt=\E[Z, + clear=\E[H\E[J, cnorm=\E[11;3|, cr=^M, cub=\E[%p1%dD, + cub1=^H, cud=\E[%p1%dB, cud1=\E[1B, cuf=\E[%p1%dC, + cuf1=\E[C, cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA, + cuu1=\E[A, cvvis=\E[11;2|, dch=\E[%p1%dP, dch1=\E[P, + dim=\E[2m, dl=\E[%p1%dM, dl1=\E[M, ed=\E[0J, el=\E[0K, + el1=\E[1K, enacs=\E(B\E)1, ff=^L, home=\E[H, + hpa=\E[%p1%{1}%+%dG, ht=^I, hts=\EH, ich=\E[%p1%d@, + il=\E[%p1%dL, il1=\E[L, ind=^J, indn=\E[%p1%dS, + invis=\E[8m, is1=\E(B\E)1\E[5;0|, is3=\E[21;1|\212, + kLFT=\E[u, kRIT=\E[v, kbs=^H, kcbt=\E[Z, kcub1=\E[D, + kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A, kf1=\EOm, kf10=\EOd, + kf11=\EOe, kf12=\EOf, kf13=\EOg, kf14=\EOh, kf15=\EOi, + kf16=\EOj, kf2=\EOV, kf3=\EOu, kf4=\ENj, kf5=\ENe, kf6=\ENf, + kf7=\ENh, kf8=\E[H, kf9=\EOc, kind=\E[S, kri=\E[T, ll=\E#2, + mc0=\E[0i, mc4=\E[?8i, mc5=\E[?4i, mgc=\E\:, nel=\EE, + pln=\E[%p1%dp%p2%:-16s, rc=\E8, + rep=%p1%c\E[%p2%{1}%-%db, rev=\E[7m, ri=\EM, + rin=\E[%p1%dT, rmacs=^O, rmir=\E[4l, rmkx=\E[19;0|, + rmln=\E<, rmso=\E[m, rmul=\E[m, rmxon=\E[29;1|, + rs2=\E[5;0|, sc=\E7, + sgr=\E[0%?%p5%p6%|%t;2%;%?%p2%t;4%;%?%p4%t;5%;%?%p3%p1%|%p6%|%t;7%;%?%p7%t;8%;m%?%p9%t\016%e\017%;, + sgr0=\E[m\017, smacs=^N, smgl=\E4, smgr=\E5, smir=\E[4h, + smkx=\E[19;1|, smln=\E?, smso=\E[7m, smul=\E[4m, + smxon=\E[29;0|, tbc=\E[3g, vpa=\E[%p1%{1}%+%dd, + +# (att500: I merged this with the att513 entry, att500 just used att513 -- esr) +att500|att513|AT&T 513 using page mode, + am, chts, mir, msgr, xenl, xon, + cols#80, lh#2, lines#24, lw#8, nlab#8, + acsc=+g\,h-f.e`bhrisjjkkllmmnnqqttuuvvwwxx{{||}}~~, + bel=^G, blink=\E[5m, bold=\E[2;7m, cbt=\E[Z, + clear=\E[H\E[J, cnorm=\E[11;0|, cr=^M, + csr=%i\E[%p1%d;%p2%dr, cub=\E[%p1%dD, cub1=^H, + cud=\E[%p1%dB, cud1=^J, cuf=\E[%p1%dC, cuf1=\E[C, + cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA, cuu1=\E[A, + cvvis=\E[11;1|, dch=\E[%p1%dP, dch1=\E[P$<1>, dim=\E[2m, + dl=\E[%p1%dM, dl1=\E[M, ed=\E[J, el=\E[K, el1=\E[1K, + enacs=\E(B\E)1, home=\E[H, hpa=\E[%p1%{1}%+%dG, ht=^I, + hts=\EH, ich=\E[%p1%d@, il=\E[%p1%dL, il1=\E[L, ind=^J, + indn=\E[%p1%dE, invis=\E[8m, + is1=\E?\E[3;3|\E[10;0|\E[21;1|\212\E[6;1|\E[1{\E[?99l, + kBEG=\ENB, kCAN=\EOW, kCMD=\EOU, kCPY=\END, kCRT=\EON, + kDC=\ENF, kDL=\ENE, kEND=\ENN, kEOL=\EOA, kEXT=\EOK, + kFND=\EOX, kHLP=\EOM, kHOM=\ENM, kIC=\ENJ, kLFT=\ENK, + kMOV=\ENC, kMSG=\EOL, kNXT=\ENH, kOPT=\EOR, kPRT=\EOZ, + kPRV=\ENG, kRDO=\EOT, kRES=\EOQ, kRIT=\ENL, kRPL=\EOY, + kSAV=\EOO, kSPD=\EOP, kUND=\EOS, kbeg=\E9, kbs=^H, kcan=\EOw, + kcbt=\E[Z, kclo=\EOV, kclr=\E[J, kcmd=\EOu, kcpy=\ENd, + kcrt=\EOn, kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A, + kdch1=\ENf, kdl1=\ENe, kel=\EOa, kend=\E0, kent=\Eent, + kext=\EOk, kf1=\EOc, kf2=\EOd, kf3=\EOe, kf4=\EOf, kf5=\EOg, + kf6=\EOh, kf7=\EOi, kf8=\EOj, kfnd=\EOx, khlp=\EOm, + khome=\E[H, kich1=\ENj, kind=\E[S, kmov=\ENc, kmrk=\ENi, + kmsg=\EOl, knp=\E[U, knxt=\ENh, kopn=\EOv, kopt=\EOr, + kpp=\E[V, kprt=\EOz, kprv=\ENg, krdo=\EOt, kref=\EOb, + kres=\EOq, krfr=\ENa, kri=\E[T, krpl=\EOy, krst=\EOB, + ksav=\EOo, kslt=\ENI, kspd=\EOp, kund=\EOs, ll=\E#2, + mc0=\E[?98l\E[0i, mc4=\E[?98l\E[?8i, mc5=\E[?98l\E[?4i, + nel=\EE, + pfkey=\E[%p1%d;%p2%l%d;3;0p F%p1%d %p2%s, + pfloc=\E[%p1%d;%p2%l%d;2;0p F%p1%d %p2%s, + pfx=\E[%p1%d;%p2%l%d;1;0p F%p1%d %p2%s, + pln=\E[%p1%dp%p2%:-16s, rc=\E8, + rep=%p1%c\E[%p2%{1}%-%db, rev=\E[7m, ri=\EM, + rin=\E[%p1%dF, rmacs=^O, rmir=\E[4l, + rmkx=\E[19;0|\E[21;1|\212, rmln=\E<, rmso=\E[m, + rmul=\E[m, + rs1=\E?\E[3;3|\E[10;0|\E[21;1|\212\E[6;1|\E[1{\E[?99l\E[2;0|\E[6;1|\E[8;0|\E[19;0|\E[1{\E[?99l, + rs2=\E[5;0|, sc=\E7, + sgr=\E[0%?%p1%p5%|%t;2%;%?%p2%p6%|%t;4%;%?%p4%t;5%;%?%p3%p1%|%p6%|%t;7%;%?%p7%t;8%;m%?%p9%t\016%e\017%;, + sgr0=\E[m\017, smacs=^N, smir=\E[4h, + smkx=\E[19;1|\E[21;4|\Eent, smln=\E?, smso=\E[7m, + smul=\E[4m, tbc=\E[3g, vpa=\E[%p1%{1}%+%dd, + +# 01-07-88 +# printer must be set to EMUL ANSI to accept ESC codes +# <cuu1> stops at top margin +# <is1> sets cpi 10,lpi 6,form 66,left 1,right 132,top 1,bottom 66,font +# and alt font ascii,wrap on,tabs cleared +# <is2> disables newline on LF,Emphasized off +# The <u0> capability sets form length +att5310|att5320|AT&T Model 53210 or 5320 matrix printer, + xhpa, xvpa, + bufsz#8192, cols#132, cps#120, it#8, lines#66, orc#10, + orhi#100, orl#12, orvi#72, + cpi=%?%p1%{10}%=%t\E[w%e%p1%{12}%=%t\E[2w%e%p1%{5}%=%t\E[5w%e%p1%{13}%=%p1%{14}%=%O%t\E[3w%e%p1%{16}%=%p1%{17}%=%O%t\E[4w%e%p1%{6}%=%t\E[6w%e%p1%{7}%=%t\E[7w%e%p1%{8}%=%t\E[8w%;, + cr=^M, + csnm=%?%p1%{0}%=%tusascii%e%p1%{1}%=%tenglish%e%p1%{2}%=%tfinnish%e%p1%{3}%=%tjapanese%e%p1%{4}%=%tnorwegian%e%p1%{5}%=%tswedish%e%p1%{6}%=%tgermanic%e%p1%{7}%=%tfrench%e%p1%{8}%=%tcanadian_french%e%p1%{9}%=%titalian%e%p1%{10}%=%tspanish%e%p1%{11}%=%tline%e%p1%{12}%=%tsecurity%e%p1%{13}%=%tebcdic%e%p1%{14}%=%tapl%e%p1%{15}%=%tmosaic%;, + cud=\E[%p1%de, cud1=^J, cuf=\E[%p1%da, cuf1=\s, cuu1=\EM, + ff=^L, hpa=\E[%p1%d`, ht=^I, is1=\Ec, is2=\E[20l\r, + lpi=%?%p1%{2}%=%t\E[4z%e%p1%{3}%=%t\E[5z%e%p1%{4}%=%t\E[6z%e%p1%{6}%=%t\E[z%e%p1%{8}%=%t\E[2z%e%p1%{12}%=%t\E[3z%;, + rshm=\E[m, + scs=%?%p1%{0}%=%t\E(B%e%p1%{1}%=%t\E(A%e%p1%{2}%=%t\E(C%e%p1%{3}%=%t\E(D%e%p1%{4}%=%t\E(E%e%p1%{5}%=%t\E(H%e%p1%{6}%=%t\E(K%e%p1%{7}%=%t\E(R%e%p1%{8}%=%t\E(Q%e%p1%{9}%=%t\E(Y%e%p1%{10}%=%t\E(Z%e%p1%{11}%=%t\E(0%e%p1%{12}%=%t\E(1%e%p1%{13}%=%t\E(3%e%p1%{14}%=%t\E(8%e%p1%{15}%=%t\E(}%;, + smgbp=\E[;%p1%dr, smglp=\E[%{1}%p1%+%ds, + smgrp=\E[;%{1}%p1%+%ds, smgtp=\E[%p1%dr, sshm=\E[5m, + u0=\E[%p1%dt, vpa=\E[%p1%dd, + +# Teletype 5620, firmware version 1.1 (8;7;3) or earlier from BRL +# The following SET-UP modes are assumed for normal operation: +# CR_DEF=CR NL_DEF=INDEX DUPLEX=FULL +# Other SET-UP modes may be set for operator convenience or communication +# requirements. This termcap description is for the Resident Terminal Mode. +# No delays specified; use "stty ixon -ixany" to enable DC3/DC1 flow control! +# The BRL entry also said: UNSAFE :ll=\E[70H: +att5620-1|tty5620-1|dmd1|Teletype 5620 with old ROMs, + am, xon, + cols#88, it#8, lines#70, vt#3, + bel=^G, clear=\E[H\E[J, cr=^M, cub1=^H, cud1=^J, cuf1=\E[C, + cup=\E[%i%p1%d;%p2%dH, cuu1=\E[A, dch=\E[%p1%dP, + dch1=\E[P, dl=\E[%p1%dM, dl1=\E[M, ed=\E[J, el=\E[K, + home=\E[H, ht=^I, ich=\E[%p1%d@, ich1=\E[@, il=\E[%p1%dL, + il1=\E[L, ind=^J, indn=\E[%p1%dS, kbs=^H, kclr=\E[2J, + kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A, khome=\E[H, + kll=\E[70;1H, nel=^M^J, rc=\E8, ri=\E[T, rin=\E[%p1%dT, + rs1=\Ec, sc=\E7, + +# 5620 terminfo (2.0 or later ROMS with char attributes) +# The following SET-UP modes are assumed for normal operation: +# DUPLEX=FULL GEN_FLOW=ON NEWLINE=INDEX RETURN=CR +# Other SET-UP modes may be set for operator convenience or communication +# requirements. This termcap description is for Resident Terminal Mode. No +# delays are specified; use "stty ixon -ixany" to enable DC3/DC1 flow control! +# assumptions: <ind> (scroll forward one line) is only done at screen bottom +# Be aware that older versions of the dmd have a firmware bug that affects +# parameter defaulting; for this terminal, the 0 in \E[0m is not optional. +# <msgr> is from an otherwise inferior BRL for this terminal. That entry +# also has <ll>=\E[70H commented out and marked unsafe. +# For more, see the 5620 FAQ maintained by David Breneman <daveb@dgtl.com>. +att5620|dmd|tty5620|ttydmd|5620|5620 terminal 88 columns, + am, msgr, npc, xon, + cols#88, it#8, lines#70, + bel=^G, bold=\E[2m, clear=\E[H\E[J, cr=^M, cub1=^H, + cud1=\E[B, cuf1=\E[C, cup=\E[%i%p1%d;%p2%dH, cuu1=\E[A, + dch=\E[%p1%dP, dch1=\E[P, dim=\E[2m, dl=\E[%p1%dM, + dl1=\E[M, ed=\E[J, el=\E[K, home=\E[H, ht=^I, ich=\E[%p1%d@, + ich1=\E[@, il=\E[%p1%dL, il1=\E[L, ind=\E[S, + indn=\E[%p1%dS, kbs=^H, kclr=\E[2J, kcub1=\E[D, kcud1=\E[B, + kcuf1=\E[C, kcuu1=\E[A, khome=\E[H, kll=\E[70;1H, nel=^J, + pfx=\E[%p1%d;%p2%l%dq%p2%s, rc=\E8, rev=\E[7m, ri=\E[T, + rin=\E[%p1%dT, rmso=\E[0m, rmul=\E[0m, rs1=\Ec, sc=\E7, + sgr0=\E[0m, smso=\E[7m, smul=\E[4m, +att5620-24|tty5620-24|dmd-24|teletype dmd 5620 in a 24x80 layer, + lines#24, use=att5620, +att5620-34|tty5620-34|dmd-34|teletype dmd 5620 in a 34x80 layer, + lines#34, use=att5620, +# 5620 layer running the "S" system's downloaded graphics handler: +att5620-s|tty5620-s|layer|vitty|5620 S layer, + am, + cols#80, it#8, lines#72, + bel=^G, clear=^L, cr=^M, cub1=^H, cud1=^J, + cup=\EY%p2%{32}%+%c%p1%{32}%+%c, cuu1=^K, dl1=\ED, + el=\EK, flash=\E^G, ht=^I, il1=\EI, ind=^J, kbs=^H, kclr=\E[2J, + kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A, khome=\E[H, + kll=\E[70;1H, + +# Entries for <kf15> thru <kf28> refer to the shifted system pf keys. +# +# Entries for <kf29> thru <kf46> refer to the alternate keypad mode +# keys: = * / + 7 8 9 - 4 5 6 , 1 2 3 0 . ENTER +att605|AT&T 605 80 column 102key keyboard, + am, eo, xon, + cols#80, lines#24, lw#8, nlab#8, wsl#80, + acsc=``aaffggjjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~, + bel=^G, blink=\E[5m, bold=\E[1m, cbt=\E[Z, clear=\E[H\E[J, + cr=^M, cub1=^H, cud1=\E[B, cuf1=\E[C, + cup=\E[%i%p1%d;%p2%dH, cuu1=\E[A, dch=\E[%p1%dP, + dch1=\E[P, dim=\E[2m, dl=\E[%p1%dM, dl1=\E[M, ed=\E[J, + el=\E[K, el1=\E[1K, fsl=\E8, ht=^I, ich=\E[%p1%d@, ich1=\E[@, + il1=\E[L, ind=^J, invis=\E[8m, + is1=\E[8;0|\E[?\E[13;20l\E[?\E[12h, is2=\E[m\017, + kLFT=\E[ A, kRIT=\E[ @, kbs=^H, kcbt=\E[Z, kclr=\E[2J, + kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A, kdch1=\E[P, + kdl1=\E[M, kend=\E[24;1H, kf1=\EOc, kf10=\ENp, kf11=\ENq, + kf12=\ENr, kf13=\ENs, kf14=\ENt, kf15=\EOC, kf16=\EOD, + kf17=\EOE, kf18=\EOF, kf19=\EOG, kf2=\EOd, kf20=\EOH, + kf21=\EOI, kf22=\EOJ, kf23=\ENO, kf24=\ENP, kf25=\ENQ, + kf26=\ENR, kf27=\ENS, kf28=\ENT, kf29=\EOP, kf3=\EOe, + kf30=\EOQ, kf31=\EOR, kf32=\EOS, kf33=\EOw, kf34=\EOx, + kf35=\EOy, kf36=\EOm, kf37=\EOt, kf38=\EOu, kf39=\EOv, + kf4=\EOf, kf40=\EOl, kf41=\EOq, kf42=\EOr, kf43=\EOs, + kf44=\EOp, kf45=\EOn, kf46=\EOM, kf5=\EOg, kf6=\EOh, + kf7=\EOi, kf8=\EOj, kf9=\ENo, khome=\E[H, kich1=\E[@, + kil1=\E[L, kind=\E[S, knp=\E[U, kpp=\E[V, ll=\E[24H, + mc4=\E[?4i, mc5=\E[?5i, nel=\EE, + pfx=\E[%p1%d;%p2%l%02dq F%p1%1d %p2%s, + pln=\E[%p1%d;0;0;0q%p2%:-16.16s, rc=\E8, rev=\E[7m, + rmacs=^O, rmir=\E[4l, rmln=\E[2p, rmso=\E[m, rmul=\E[m, + rs2=\Ec\E[?3l, sc=\E7, sgr0=\E[m\017, smacs=\E)0\016, + smir=\E[4h, smln=\E[p, smso=\E[7m, smul=\E[4m, + tsl=\E7\E[25;%i%p1%dx, +att605-pc|ATT 605 in pc term mode, + acsc=j\331k\277l\332m\300n\305q\304t\303u\264v\301w\302x\263, + cbt=\E[Z, cub1=\E[D, cud1=\E[B, cuf1=\E[C, cuu1=\E[A, + dch1=\E[P, dl1=\E[M, ich1=\E[@, il=\E[L, il1=\E[L, kcbt=\E[Z, + kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A, kdch1=\E[P, + kdl1=\E[M, kend=\E[F, kf1=\E[M, kf10=\E[V, kf2=\E[N, + kf3=\E[O, kf4=\E[P, kf5=\E[Q, kf6=\E[R, kf7=\E[S, kf8=\E[T, + kf9=\E[U, khome=\E[H, kich1=\E[@, knp=\E[G, kpp=\E[I, + rmsc=400\E[50;0|, smsc=250\E[?11l\E[50;1|, xoffc=g, + xonc=e, + use=att605, +att605-w|AT&T 605-w 132 column 102 key keyboard, + cols#132, wsl#132, + is1=\E[8;0|\E[?4;5;13;15l\E[13;20l\E[?3;7h\E[12h\E(B\E)0, use=att605, +# (att610: I added <rmam>/<smam> based on the init string. I also +# added <indn> and <rin> because the BSD file says the att615s have them, +# and the 615 is like a 610 with a big keyboard, and most of their other +# smart terminals support the same sequence -- esr) +att610|AT&T 610; 80 column; 98key keyboard, + am, eslok, hs, mir, msgr, xenl, xon, + cols#80, it#8, lh#2, lines#24, lw#8, nlab#8, wsl#80, + acsc=``aaffggjjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~, + bel=^G, blink=\E[5m, bold=\E[1m, cbt=\E[Z, civis=\E[?25l, + clear=\E[H\E[J, cnorm=\E[?25h\E[?12l, cr=^M, + csr=\E[%i%p1%d;%p2%dr, cub=\E[%p1%dD, cub1=^H, + cud=\E[%p1%dB, cud1=\E[B, cuf=\E[%p1%dC, cuf1=\E[C, + cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA, cuu1=\E[A, + cvvis=\E[?12;25h, dch=\E[%p1%dP, dch1=\E[P, dim=\E[2m, + dl=\E[%p1%dM, dl1=\E[M, ed=\E[J, el=\E[K, el1=\E[1K, + flash=\E[?5h$<200>\E[?5l, fsl=\E8, home=\E[H, ht=^I, + ich=\E[%p1%d@, il=\E[%p1%dL, il1=\E[L, ind=\ED, + indn=\E[%p1%dS, invis=\E[8m, + is1=\E[8;0|\E[?3;4;5;13;15l\E[13;20l\E[?7h\E[12h\E(B\E)0, + is2=\E[m\017, is3=\E(B\E)0, kLFT=\E[ @, kRIT=\E[ A, kbs=^H, + kcbt=\E[Z, kclr=\E[2J, kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C, + kcuu1=\E[A, kf1=\EOc, kf10=\ENp, kf11=\ENq, kf12=\ENr, + kf13=\ENs, kf14=\ENt, kf2=\EOd, kf3=\EOe, kf4=\EOf, kf5=\EOg, + kf6=\EOh, kf7=\EOi, kf8=\EOj, kf9=\ENo, khome=\E[H, + kind=\E[S, kri=\E[T, ll=\E[24H, mc4=\E[?4i, mc5=\E[?5i, + nel=\EE, + pfx=\E[%p1%d;%p2%l%02dq F%p1%1d %p2%s, + pln=\E[%p1%d;0;0;0q%p2%:-16.16s, rc=\E8, rev=\E[7m, + ri=\EM, rin=\E[%p1%dT, rmacs=^O, rmam=\E[?7l, rmir=\E[4l, + rmln=\E[2p, rmso=\E[m, rmul=\E[m, rs2=\Ec\E[?3l, sc=\E7, + sgr=\E[0%?%p6%t;1%;%?%p5%t;2%;%?%p2%t;4%;%?%p4%t;5%;%?%p3%p1%|%t;7%;%?%p7%t;8%;m%?%p9%t\016%e\017%;, + sgr0=\E[m\017, smacs=^N, smam=\E[?7h, smir=\E[4h, + smln=\E[p, smso=\E[7m, smul=\E[4m, tsl=\E7\E[25;%i%p1%dx, +att610-w|AT&T 610; 132 column; 98key keyboard, + cols#132, wsl#132, + is1=\E[8;0|\E[?4;5;13;15l\E[13;20l\E[?3;7h\E[12h, use=att610, + +att610-103k|AT&T 610; 80 column; 103key keyboard, + kBEG=\ENB, kCAN=\EOW, kCMD=\EOU, kCPY=\END, kCRT=\EON, + kDC=\ENF, kDL=\ENE, kEND=\ENN, kEOL=\EOA, kEXT=\EOK, + kFND=\EOX, kHLP=\EOM, kMOV=\ENC, kMSG=\EOL, kNXT=\ENH, + kOPT=\EOR, kPRT=\EOZ, kPRV=\ENG, kRDO=\EOT, kRES=\EOQ, + kRPL=\EOY, kSAV=\EOO, kSPD=\EOP, kUND=\EOS, kbeg=\E9, + kcan=\EOw, kclo=\EOV, kcmd=\EOu, kcpy=\ENd, kcrt=\EOn, + kdch1=\ENf, kdl1=\ENe, kel=\EOa, kend=\E0, kent=^M, + kext=\EOk, kf10@, kf11@, kf12@, kf13@, kf14@, kf9@, kfnd=\EOx, + khlp=\EOm, kich1=\ENj, kmov=\ENc, kmrk=\ENi, kmsg=\EOl, + knp=\E[U, knxt=\ENh, kopn=\EOv, kopt=\EOr, kpp=\E[V, + kprt=\EOz, kprv=\ENg, krdo=\EOt, kref=\EOb, kres=\EOq, + krfr=\ENa, krmir=\ENj, krpl=\EOy, krst=\EOB, ksav=\EOo, + kslt=\ENI, kspd=\EOp, kund=\EOs, + use=att610, +att610-103k-w|AT&T 610; 132 column; 103key keyboard, + cols#132, wsl#132, + is1=\E[8;0|\E[?4;5;13;15l\E[13;20l\E[?3;7h\E[12h, use=att610-103k, +att615|AT&T 615; 80 column; 98key keyboard, + kLFT=\E[ A, kRIT=\E[ @, kf15=\EOC, kf16=\EOD, kf17=\EOE, + kf18=\EOF, kf19=\EOG, kf20=\EOH, kf21=\EOI, kf22=\EOJ, + kf23=\ENO, kf24=\ENP, kf25=\ENQ, kf26=\ENR, kf27=\ENS, + kf28=\ENT, kf29=\EOP, kf30=\EOQ, kf31=\EOR, kf32=\EOS, + kf33=\EOw, kf34=\EOx, kf35=\EOy, kf36=\EOm, kf37=\EOt, + kf38=\EOu, kf39=\EOv, kf40=\EOl, kf41=\EOq, kf42=\EOr, + kf43=\EOs, kf44=\EOp, kf45=\EOn, kf46=\EOM, + use=att610, +att615-w|AT&T 615; 132 column; 98key keyboard, + kLFT=\E[ A, kRIT=\E[ @, kf15=\EOC, kf16=\EOD, kf17=\EOE, + kf18=\EOF, kf19=\EOG, kf20=\EOH, kf21=\EOI, kf22=\EOJ, + kf23=\ENO, kf24=\ENP, kf25=\ENQ, kf26=\ENR, kf27=\ENS, + kf28=\ENT, kf29=\EOP, kf30=\EOQ, kf31=\EOR, kf32=\EOS, + kf33=\EOw, kf34=\EOx, kf35=\EOy, kf36=\EOm, kf37=\EOt, + kf38=\EOu, kf39=\EOv, kf40=\EOl, kf41=\EOq, kf42=\EOr, + kf43=\EOs, kf44=\EOp, kf45=\EOn, kf46=\EOM, + use=att610-w, +att615-103k|AT&T 615; 80 column; 103key keyboard, + kLFT=\E[ A, kRIT=\E[ @, + use=att610-103k, +att615-103k-w|AT&T 615; 132 column; 103key keyboard, + kLFT=\E[ A, kRIT=\E[ @, + use=att610-103k-w, +# (att620: I added <rmam>/<smam> based on the init string and +# <rin>/<indn> from a BSD termcap -- esr) +att620|AT&T 620; 80 column; 98key keyboard, + am, eslok, hs, mir, msgr, xenl, xon, + cols#80, it#8, lh#2, lines#24, lw#8, nlab#8, wsl#80, + acsc=``aaffggjjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~, + bel=^G, blink=\E[5m, bold=\E[1m, cbt=\E[Z, civis=\E[?25l, + clear=\E[H\E[J, cnorm=\E[?25h\E[?12l, cr=^M, + csr=\E[%i%p1%d;%p2%dr, cub=\E[%p1%dD, cub1=^H, + cud=\E[%p1%dB, cud1=\E[B, cuf=\E[%p1%dC, cuf1=\E[C, + cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA, cuu1=\E[A, + cvvis=\E[?12;25h, dch=\E[%p1%dP, dch1=\E[P, dim=\E[2m, + dl=\E[%p1%dM, dl1=\E[M, ed=\E[J, el=\E[K, el1=\E[1K, + flash=\E[?5h$<200>\E[?5l, fsl=\E8, home=\E[H, ht=^I, + ich=\E[%p1%d@, il=\E[%p1%dL, il1=\E[L, ind=\ED, + indn=\E[%p1%dS, invis=\E[8m, + is1=\E[8;0|\E[?3;4;5;13;15l\E[13;20l\E[?7h\E[12h, + is2=\E[m\017, is3=\E(B\E)0, kLFT=\E[ A, kRIT=\E[ @, kbs=^H, + kcbt=\E[Z, kclr=\E[2J, kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C, + kcuu1=\E[A, kf1=\EOc, kf10=\ENp, kf11=\ENq, kf12=\ENr, + kf13=\ENs, kf14=\ENt, kf15=\EOC, kf16=\EOD, kf17=\EOE, + kf18=\EOF, kf19=\EOG, kf2=\EOd, kf20=\EOH, kf21=\EOI, + kf22=\EOJ, kf23=\ENO, kf24=\ENP, kf25=\ENQ, kf26=\ENR, + kf27=\ENS, kf28=\ENT, kf29=\EOP, kf3=\EOe, kf30=\EOQ, + kf31=\EOR, kf32=\EOS, kf33=\EOw, kf34=\EOx, kf35=\EOy, + kf36=\EOm, kf37=\EOt, kf38=\EOu, kf39=\EOv, kf4=\EOf, + kf40=\EOl, kf41=\EOq, kf42=\EOr, kf43=\EOs, kf44=\EOp, + kf45=\EOn, kf46=\EOM, kf5=\EOg, kf6=\EOh, kf7=\EOi, kf8=\EOj, + kf9=\ENo, khome=\E[H, kind=\E[S, kri=\E[T, ll=\E[24H, + mc4=\E[?4i, mc5=\E[?5i, nel=\EE, + pfx=\E[%p1%d;%p2%l%02dq F%p1%1d %p2%s, + pln=\E[%p1%d;0;0;0q%p2%:-16.16s, rc=\E8, rev=\E[7m, + ri=\EM, rin=\E[%p1%dT, rmacs=\E(B\017, rmam=\E[?7l, + rmir=\E[4l, rmln=\E[2p, rmso=\E[m, rmul=\E[m, + rs2=\Ec\E[?3l, sc=\E7, + sgr=\E[0%?%p6%t;1%;%?%p2%t;4%;%?%p4%t;5%;%?%p3%p1%|%t;7%;%?%p7%t;8%;m%?%p9%t\016%e\017%;, + sgr0=\E[m\E(B\017, smacs=\E)0\016, smam=\E[?7h, + smir=\E[4h, smln=\E[p, smso=\E[7m, smul=\E[4m, + tsl=\E7\E[25;%i%p1%dx, +att620-w|AT&T 620; 132 column; 98key keyboard, + cols#132, wsl#132, + is1=\E[8;0|\E[?4;5;13;15l\E[13;20l\E[?3;7h\E[12h, use=att620, +att620-103k|AT&T 620; 80 column; 103key keyboard, + kBEG=\ENB, kCAN=\EOW, kCMD=\EOU, kCPY=\END, kCRT=\EON, + kDC=\ENF, kDL=\ENE, kEND=\ENN, kEOL=\EOA, kEXT=\EOK, + kFND=\EOX, kHLP=\EOM, kMOV=\ENC, kMSG=\EOL, kNXT=\ENH, + kOPT=\EOR, kPRT=\EOZ, kPRV=\ENG, kRDO=\EOT, kRES=\EOQ, + kRPL=\EOY, kSAV=\EOO, kSPD=\EOP, kUND=\EOS, kbeg=\E9, + kcan=\EOw, kclo=\EOV, kcmd=\EOu, kcpy=\ENd, kcrt=\EOn, + kdch1=\ENf, kdl1=\ENe, kel=\EOa, kend=\E0, kent=^M, + kext=\EOk, kf10@, kf11@, kf12@, kf13@, kf14@, kf15@, kf16@, kf17@, + kf18@, kf19@, kf20@, kf21@, kf22@, kf23@, kf24@, kf25@, kf26@, kf27@, + kf28@, kf29@, kf30@, kf31@, kf32@, kf33@, kf34@, kf35@, kf36@, kf37@, + kf38@, kf39@, kf40@, kf41@, kf42@, kf43@, kf44@, kf45@, kf46@, kf9@, + kfnd=\EOx, khlp=\EOm, kich1=\ENj, kmov=\ENc, kmrk=\ENi, + kmsg=\EOl, knp=\E[U, knxt=\ENh, kopn=\EOv, kopt=\EOr, + kpp=\E[V, kprt=\EOz, kprv=\ENg, krdo=\EOt, kref=\EOb, + kres=\EOq, krfr=\ENa, krmir=\ENj, krpl=\EOy, krst=\EOB, + ksav=\EOo, kslt=\ENI, kspd=\EOp, kund=\EOs, + use=att620, + +att620-103k-w|AT&T 620; 132 column; 103key keyboard, + cols#132, wsl#132, + is1=\E[8;0|\E[?4;5;13;15l\E[13;20l\E[?3;7h\E[12h, use=att620-103k, + +# AT&T (formerly Teletype) 630 Multi-Tasking Graphics terminal +# The following SETUP modes are assumed for normal operation: +# Local_Echo=Off Gen_Flow=On Return=CR Received_Newline=LF +# Font_Size=Large Non-Layers_Window_Cols=80 +# Non-Layers_Window_Rows=60 +# Other SETUP modes may be set for operator convenience or communication +# requirements. Some capabilities assume a printer attached to the Aux EIA +# port. This termcap description is for the Fixed Non-Layers Window. No +# delays are specified; use "stty ixon -ixany" to enable DC3/DC1 flow control! +# (att630: added <ich1>, <blink> and <dim> from a BSD termcap file -- esr) +att630|AT&T 630 windowing terminal, + am, da, db, mir, msgr, npc, xon, + cols#80, it#8, lines#60, lm#0, + bel=^G, blink=\E[5m, cbt=\E[Z, clear=\E[H\E[J, cr=^M, + cub=\E[%p1%dD, cub1=^H, cud=\E[%p1%dB, cud1=\E[B, + cuf=\E[%p1%dC, cuf1=\E[C, cup=\E[%i%p1%d;%p2%dH, + cuu=\E[%p1%dA, cuu1=\E[A, dch=\E[%p1%dP, dch1=\E[P, + dim=\E[2m, dl=\E[%p1%dM, dl1=\E[M, ed=\E[J, el=\E[K, + el1=\E[1K, home=\E[H, ht=^I, ich=\E[%p1%d@, ich1=\E[@, + il=\E[%p1%dL, il1=\E[L, ind=\ED, indn=\E[%p1%dS, is2=\E[m, + kbs=^H, kcbt=\E[Z, kclr=\E[2J, kcub1=\E[D, kcud1=\E[B, + kcuf1=\E[C, kcuu1=\E[A, kdch1=\E[P, kdl1=\E[M, kent=^M, + kf10=\ENp, kf11=\ENq, kf12=\ENr, kf13=\ENs, kf14=\ENt, + kf15=\ENu, kf16=\ENv, kf17=\ENw, kf18=\ENx, kf19=\ENy, + kf20=\ENz, kf21=\EN{, kf22=\EN|, kf23=\EN}, kf24=\EN~, + kf9=\ENo, khome=\E[H, kich1=\E[@, kil1=\E[L, mc4=\E[?4i, + mc5=\E[?5i, nel=^M^J, pfx=\E[%p1%d;%p2%l%dq%p2%s, rc=\E8, + rev=\E[7m, ri=\EM, rin=\E[%p1%dT, rmir=\E[4l, rmso=\E[m, + rmul=\E[m, rs2=\Ec, sc=\E7, + sgr=\E[0%?%p2%t;4%;%?%p1%p3%|%p4%|%p5%|%t;7%;m, + sgr0=\E[m, smir=\E[4h, smso=\E[7m, smul=\E[4m, +att630-24|5630-24|5630DMD-24|630MTG-24|AT&T 630 windowing terminal 24 lines, + lines#24, use=att630, + +# This is the att700 entry for 700 native emulation of the AT&T 700 +# terminal. Comments are relative to changes from the 605V2 entry and +# att730 on which the entry is based. Comments show the terminfo +# capability name, termcap name, and description. +# +# Here is what's going onm in the init string: +# ESC [ 50;4| set 700 native mode (really is 605) +# x ESC [ 56;ps| set lines to 24: ps=0; 40: ps=1 (plus status line) +# ESC [ 53;0| set GenFlow to Xon/Xoff +# ESC [ 8 ;0| set CR on NL +# x ESC [ ? 3 l/h set workspace: 80 col(l); 132 col(h) +# ESC [ ? 4 l jump scroll +# ESC [ ? 5 l/h video: normal (l); reverse (h) +# ESC [ ?13 l Labels on +# ESC [ ?15 l parity check = no +# ESC [ 13 l monitor mode off +# ESC [ 20 l LF on NL (not CRLF on NL) +# ESC [ ? 7 h autowrap on +# ESC [ 12 h local echo off +# ESC ( B GO = ASCII +# ESC ) 0 G1 = Special Char & Line Drawing +# ESC [ ? 31 l Set 7 bit controls +# +# Note: Most terminals, especially the 600 family use Reverse Video for +# standout mode. DEC also uses reverse video. The VT100 uses bold in addition +# Assume we should stay with reverse video for 70.. However, the 605V2 exits +# standout mode with \E[m (all normal attributes). The 730 entry simply +# exits reverse video which would leave other current attributes intact. It +# was assumed the 730 entry to be more correct so rmso has changed. The +# 605V2 has no sequences to turn individual attributes off, thus its setting +# and the rmso/smso settings from the 730. +# +# Note: For the same reason as above in rmso I changed exit under-score mode +# to specifically turn off underscore, rather than return to all normal +# attributes +# +# Note: The following pkey_xmit is taken from the 605V2 which contained the +# capability as pfxl. It was changed here to pfx since pfxl +# will only compile successfully with Unix 4.0 tic. Also note that pfx only +# allows strings to be parameters and label values must be programmed as +# constant strings. Supposedly the pfxl of Version 4.0 allows both labels +# and strings to be parameters. The 605V2 pfx entry should be examined later +# in this regard. For reference the 730 pfxl entry is shown here for comparison +# 730 pfx entry: +# pfxl=\E[%?%p1%{25}%<%t%p1%e%p1%{24}%-%;%d;%p2%l%02d%?%p1%{25}%<%tq\s\s\s +# SYS\s\s\s\s\sF%p1%:-2d\s\s%e;0;3q%;%p2%s, +# +# (for 4.0 tic) +# pfxl=\E[%p1%d;%p2%l%02dq%?%p1%{9}%<%t F%p1%1d %;%p2%s, +# +# (for <4.0 tic) +# pfx=\E[%p1%d;%p2%l%02dq%?%p1%{9}%<%t F%p1%1d %;%p2%s, +# +# From the AT&T 705 Multi-tasking terminal user's guide Page 8-8,8-9 +# +# Port1 Interface +# +# modular 10 pin Connector +# Left side Right side +# Pin 1 2 3 4 5 6 7 8 9 10 +# +# Key (notch) at bottom +# +# Pin 1 DSR +# 3 DCD +# 4 DTR +# 5 Sig Ground +# 6 RD +# 7 SD +# 8 CTS +# 9 RTS +# 10 Frame Ground +# +# The manual is 189 pages and is loaded with details about the escape codes, +# etc..... Available from AT&T CIC 800-432-6600... +# ask for Document number 999-300-660.. +# +att700|AT&T 700 24x80 column display w/102key keyboard, + am, eslok, hs, mir, msgr, xenl, xon, + cols#80, it#8, lh#2, lines#24, lw#8, nlab#8, wsl#80, + acsc=``aaffggjjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~, + bel=^G, blink=\E[5m, bold=\E[1m, cbt=\E[Z, civis=\E[?25l, + clear=\E[H\E[J, cnorm=\E[?25h\E[?12l, cr=^M, + csr=\E[%i%p1%d;%p2%dr, cub=\E[%p1%dD, cub1=^H, + cud=\E[%p1%dB, cud1=\E[B, cuf=\E[%p1%dC, cuf1=\E[C, + cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA, cuu1=\E[A, + cvvis=\E[?12;25h, dch=\E[%p1%dP, dch1=\E[P, dim=\E[2m, + dl=\E[%p1%dM, dl1=\E[M, ed=\E[J, el=\E[K, el1=\E[1K, + enacs=\E(B\E)0, flash=\E[?5h$<200>\E[?5l, fln=4\,4, + fsl=\E8, home=\E[H, ht=^I, hts=\EH, ich=\E[%p1%d@, + il=\E[%p1%dL, il1=\E[L, ind=\ED, invis=\E[8m, + is2=\E[50;4|\E[53;0|\E[8;0|\E[?4;13;15l\E[13;20l\E[?7h\E[12h\E(B\E)0\E[?31l\E[0m\017, + is3=\E(B\E)0, kLFT=\E[ A, kRIT=\E[ @, kbs=^H, kcbt=\E[Z, + kclr=\E[2J, kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A, + kdch1=\E[P, kdl1=\E[M, kend=\E[24;1H, kf1=\EOc, kf10=\ENp, + kf11=\ENq, kf12=\ENr, kf13=\ENs, kf14=\ENt, kf15=\EOC, + kf16=\EOD, kf17=\EOE, kf18=\EOF, kf19=\EOG, kf2=\EOd, + kf20=\EOH, kf21=\EOI, kf22=\EOJ, kf23=\ENO, kf24=\ENP, + kf25=\ENQ, kf26=\ENR, kf27=\ENS, kf28=\ENT, kf29=\EOq, + kf3=\EOe, kf30=\EOr, kf31=\EOs, kf32=\EOt, kf33=\EOu, + kf34=\EOv, kf35=\EOw, kf36=\EOx, kf37=\EOy, kf38=\EOu, + kf39=\EOv, kf4=\EOf, kf40=\EOl, kf41=\EOq, kf42=\EOr, + kf43=\EOs, kf44=\EOp, kf45=\EOn, kf46=\EOM, kf5=\EOg, + kf6=\EOh, kf7=\EOi, kf8=\EOj, kf9=\ENo, khome=\E[H, + kich1=\E[@, kil1=\E[L, knp=\E[U, kpp=\E[V, ll=\E[24H, + mc0=\E[i, mc4=\E[?4i, mc5=\E[?5i, nel=\EE, + pfx=\E[%p1%d;%p2%l%02dq%?%p1%{9}%<%t F%p1%1d %;%p2%s, + pln=\E[%p1%d;0;0;0q%p2%:-16.16s, rc=\E8, + rep=%p1%c\E[%p2%{1}%-%db, rev=\E[7m, ri=\EM, rmacs=^O, + rmir=\E[4l, rmln=\E[2p, rmso=\E[27m, rmul=\E[24m, + rmxon=\E[53;3|, rs1=\Ec\E[?3;5l\E[56;0|, sc=\E7, + sgr=\E[0%?%p6%t;1%;%?%p5%t;2%;%?%p2%t;4%;%?%p4%t;5%;%?%p3%p1%|%t;7%;%?%p7%t;8%;m%?%p9%t\016%e\017%;, + sgr0=\E[m\017, smacs=^N, smir=\E[4h, smln=\E[p, smso=\E[7m, + smul=\E[4m, smxon=\E[53;0|, tbc=\E[3g, + tsl=\E7\E[99;%i%p1%dx, + +# This entry was modified 3/13/90 by JWE. +# fixes include additions of <enacs>, correcting <rep>, and modification +# of <kHOM>. (See comments below) +# att730 has status line of 80 chars +# These were commented out: <indn=\E[%p1%dS>, <rin=\E[%p1%dT>, +# the <kf25> and up keys are used for shifted system Fkeys +# NOTE: JWE 3/13/90 The 98 key keyboard translation for shift/HOME is +# currently the same as <khome> (unshifted HOME or \E[H). On the 102, 102+1 +# and 122 key keyboards, the 730's translation is \E[2J. For consistency +# <kHOM> has been commented out. The user can uncomment <kHOM> if using the +# 102, 102+1, or 122 key keyboards +# kHOM=\E[2J, +# (att730: I added <rmam>/<smam> based on the init string -- esr) +att730|AT&T 730 windowing terminal, + am, da, db, eslok, hs, mir, msgr, npc, xenl, xon, + cols#80, it#8, lh#2, lines#60, lm#0, lw#8, nlab#24, wsl#80, + acsc=``aaffggjjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~, + bel=^G, blink=\E[5m, bold=\E[1m, cbt=\E[Z, civis=\E[?25l, + clear=\E[H\E[J, cnorm=\E[?25h\E[?12l, cr=^M, + csr=\E[%i%p1%d;%p2%dr, cub=\E[%p1%dD, cub1=^H, + cud=\E[%p1%dB, cud1=\E[B, cuf=\E[%p1%dC, cuf1=\E[C, + cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA, cuu1=\E[A, + cvvis=\E[?12;25h, dch=\E[%p1%dP, dch1=\E[P, dim=\E[2m, + dl=\E[%p1%dM, dl1=\E[M, ed=\E[J, el=\E[K, el1=\E[1K, + enacs=\E(B\E)0, flash=\E[?5h$<200>\E[?5l, fsl=\E8, + home=\E[H, ht=^I, ich=\E[%p1%d@, il=\E[%p1%dL, il1=\E[L, + ind=\ED, invis=\E[8m, + is1=\E[8;0|\E[?3;4;5;13;15l\E[13;20l\E[?7h\E[12h\E(B\E)B, + is2=\E[m\017, is3=\E(B\E)0, kLFT=\E[ @, kRIT=\E[ A, kbs=^H, + kcbt=\E[Z, kclr=\E[2J, kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C, + kcuu1=\E[A, kf1=\EOc, kf10=\ENp, kf11=\ENq, kf12=\ENr, + kf13=\ENs, kf14=\ENt, kf15=\ENu, kf16=\ENv, kf17=\ENw, + kf18=\ENx, kf19=\ENy, kf2=\EOd, kf20=\ENz, kf21=\EN{, + kf22=\EN|, kf23=\EN}, kf24=\EN~, kf25=\EOC, kf26=\EOD, + kf27=\EOE, kf28=\EOF, kf29=\EOG, kf3=\EOe, kf30=\EOH, + kf31=\EOI, kf32=\EOJ, kf33=\ENO, kf34=\ENP, kf35=\ENQ, + kf36=\ENR, kf37=\ENS, kf38=\ENT, kf39=\EOU, kf4=\EOf, + kf40=\EOV, kf41=\EOW, kf42=\EOX, kf43=\EOY, kf44=\EOZ, + kf45=\EO[, kf46=\EO\s, kf47=\EO], kf48=\EO\^, kf5=\EOg, + kf6=\EOh, kf7=\EOi, kf8=\EOj, kf9=\ENo, khome=\E[H, + kich1=\E[@, kil1=\E[L, kind=\E[S, kri=\E[T, + mc0=\E[?19h\E[0i, mc4=\E[?4i, mc5=\E[?5i, nel=\EE, + pfx=\E[%?%p1%{25}%<%t%p1%e%p1%{24}%-%;%d;%p2%l%02d%?%p1%{25}%<%tq SYS F%p1%:-2d %e;0;3q%;%p2%s, + pfxl=\E[%p1%d;%p2%l%02d;0;0q%p3%:-16.16s%p2%s, + pln=\E[%p1%d;0;0;0q%p2%:-16.16s, rc=\E8, + rep=%p1%c\E[%p2%{1}%-%db, rev=\E[7m, ri=\EM, rmacs=^O, + rmam=\E[?7l, rmir=\E[4l, rmln=\E[?13h, rmso=\E[27m, + rmul=\E[24m, rmxon=\E[?21l, rs2=\Ec\E[?3l, sc=\E7, + sgr=\E[0%?%p6%t;1%;%?%p5%t;2%;%?%p2%t;4%;%?%p4%t;5%;%?%p3%p1%|%t;7%;%?%p7%t;8%;m%?%p9%t\016%e\017%;, + sgr0=\E[m\017, smacs=^N, smam=\E[?7h, smir=\E[4h, + smln=\E[?13l, smso=\E[7m, smul=\E[4m, smxon=\E[?21h, + swidm=\E#6, tsl=\E7\E[;%i%p1%dx, +att730-41|730MTG-41|AT&T 730-41 windowing terminal Version, + lines#41, use=att730, +att730-24|730MTG-24|AT&T 730-24 windowing terminal Version, + lines#24, use=att730, +att730r|730MTGr|AT&T 730 rev video windowing terminal Version, + flash=\E[?5l$<200>\E[?5h, + is1=\E[8;0|\E[?3;4;13;15l\E[?5h\E[13;20l\E[?7h\E[12h\E(B\E)B, use=att730, +att730r-41|730MTG-41r|AT&T 730r-41 rev video windowing terminal Version, + lines#41, use=att730r, +att730r-24|730MTGr-24|AT&T 730r-24 rev video windowing terminal Version, + lines#24, use=att730r, + +# The following represents the screen layout along with the associated +# bezel buttons for the 5430/pt505 terminal. The "kf" designations do +# not appear on the screen but are shown to reference the bezel buttons. +# The "CMD", "MAIL", and "REDRAW" buttons are shown in their approximate +# position relative to the screen. +# +# +# +# +----------------------------------------------------------------+ +# | | +# XXXX | kf0 kf24 | XXXX +# | | +# | | +# XXXX | kf1 kf23 | XXXX +# | | +# | | +# XXXX | kf2 kf22 | XXXX +# | | +# | | +# XXXX | kf3 kf21 | XXXX +# | | +# | | +# XXXX | kf4 kf20 | XXXX +# | | +# | | +# XXXX | kf5 kf19 | XXXX +# | | +# | | +# XXXX | kf6 kf18 | XXXX +# | | +# | | +# XXXX | | XXXX +# | | +# | | +# +----------------------------------------------------------------+ +# +# XXXX XXXX XXXX XXXX XXXX XXXX XXXX XXXX XXXX XXXX +# +# Note: XXXX represents the screen buttons +# CMD REDRAW +# +# MAIL +# +# version 1 note: +# The character string sent by key 'kf26' may be user programmable +# to send either \E[16s, or \E[26s. +# The character string sent by key 'krfr' may be user programmable +# to send either \E[17s, or \E[27s. +# +# Depression of the "CMD" key sends \E! (kcmd) +# Depression of the "MAIL" key sends \E[26s (kf26) +# "REDRAW" same as "REFRESH" (krfr) +# +# "kf" functions adds carriage return to output string if terminal is in +# 'new line' mode. +# +# The following are functions not covered in the table above: +# +# Set keyboard character (SKC): \EPn1;Pn2w +# Pn1= 0 Back Space key +# Pn1= 1 Break key +# Pn2= Program char (hex) +# +# Screen Definition (SDF): \E[Pn1;Pn2;Pn3;Pn4;Pn5t +# Pn1= Window number (1-39) +# Pn2-Pn5= Y;X;Y;X coordinates +# +# Screen Selection (SSL): \E[Pnu +# Pn= Window number +# +# Set Terminal Modes (SM): \E[Pnh +# Pn= 3 Graphics mode +# Pn= > Cursor blink +# Pn= < Enter new line mode +# Pn= = Enter reverse insert/replace mode +# Pn= ? Enter no scroll mode +# +# Reset Terminal Mode (RM): \E[Pnl +# Pn= 3 Exit graphics mode +# Pn= > Exit cursor blink +# Pn= < Exit new line mode +# Pn= = Exit reverse insert/replace mode +# Pn= ? Exit no scroll mode +# +# Screen Status Report (SSR): \E[Pnp +# Pn= 0 Request current window number +# Pn= 1 Request current window dimensions +# +# Device Status Report (DSR): \E[6n Request cursor position +# +# Call Status Report (CSR): \E[Pnv +# Pn= 0 Call failed +# Pn= 1 Call successful +# +# Transparent Button String (TBS): \E[Pn1;Pn2;Pn3;{string +# Pn1= Button number to be loaded +# Pn2= Character count of "string" +# Pn3= Key mode being loaded: +# 0= Unshifted +# 1= Shifted +# 2= Control +# String= Text string (15 chars max) +# +# Screen Number Report (SNR): \E[Pnp +# Pn= Screen number +# +# Screen Dimension Report (SDR): \E[Pn1;Pn2r +# Pn1= Number of rows available in window +# Pn2= Number of columns available in window +# +# Cursor Position Report (CPR): \E[Pn1;Pn2R +# Pn1= "Y" Position of cursor +# Pn2= "X" Position of cursor +# +# Request Answer Back (RAB): \E[c +# +# Answer Back Response (ABR): \E[?;*;30;VSV +# *= 0 No printer available +# *= 2 Printer available +# V= Software version number +# SV= Software sub version number +# (printer-available field not documented in v1) +# +# Screen Alignment Aid: \En +# +# Bell (lower pitch): \E[x +# +# Dial Phone Number: \EPdstring\ +# string= Phone number to be dialed +# +# Set Phone Labels: \EPpstring\ +# string= Label for phone buttons +# +# Set Clock: \EPchour;minute;second\ +# +# Position Clock: \EPsY;X\ +# Y= "Y" coordinate +# X= "X" coordinate +# +# Delete Clock: \Epr\ +# +# Programming The Function Buttons: \EPfPn;string\ +# Pn= Button number (00-06, 18-24) +# (kf00-kf06, kf18-kf24) +# string= Text to sent on button depression +# +# The following in version 2 only: +# +# Request For Local Directory Data: \EPp12;\ +# +# Local Directory Data to host: \EPp11;LOCAL...DIRECTORY...DATA\ +# +# Request for Local Directory Data in print format: \EPp13;\ +# +# Enable 'Prt on Line' mode: \022 (DC2) +# +# Disable 'Prt on Line' mode: \024 (DC4) +# + +# 05-Aug-86: +# The following Terminfo entry describes functions which are supported by +# the AT&T 5430/pt505 terminal software version 2 and later. +att505|pt505|att5430|gs5430|AT&T Personal Terminal 505 or 5430 GETSET terminal, + am, xon, + cols#80, it#8, lines#24, + acsc=``aaffggjjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~, + bel=^G, blink=\E[5m, bold=\E[1m, clear=\E[2J\E[H, + cnorm=\E[>l, cr=^M, cub=\E[%p1%dD, cub1=\E[D, + cud=\E[%p1%dB, cud1=\E[B, cuf=\E[%p1%dC, cuf1=\E[C, + cup=\E[%p1%d;%p2%dH, cuu=\E[%p1%dA, cuu1=\E[A, + cvvis=\E[>h, dch=\E[%p1%dP, dch1=\E[P, dl=\E[%p1%dM, + dl1=\E[M, ed=\E[0J, el=\E[0K, el1=\E2K, home=\E[H, ht=^I, + il=\E[%p1%dL, il1=\E[L, ind=^J, + is1=\EPr\\E[0u\E[2J\E[0;0H\E[m\E[3l\E[<l\E[4l\E[>l\E[=l\E[?l, + kbs=^H, kcmd=\E!, kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C, + kcuu1=\E[A, kf0=\E[00s, kf1=\E[01s, kf18=\E[18s, + kf19=\E[19s, kf2=\E[02s, kf20=\E[20s, kf21=\E[21s, + kf22=\E[22s, kf23=\E[23s, kf24=\E24s, kf26=\E26s, + kf3=\E[03s, kf4=\E[04s, kf5=\E[05s, kf6=\E[06s, + krfr=\E[27s, mc4=\E[4i, mc5=\E[5i, rc=\E8, rev=\E[7m, + rmacs=\E[10m, rmam=\E[11;1j, rmir=\E[4l, rmso=\E[m, + rmul=\E[m, rs1=\Ec, sc=\E7, sgr0=\E[m, smacs=\E[11m, + smam=\E[11;0j, smir=\E[4h, smso=\E[1m, smul=\E[4m, + +# The following Terminfo entry describes functions which are supported by +# the AT&T 5430/pt505 terminal software version 1. +att505-24|pt505-24|gs5430-24|AT&T PT505 or 5430 GETSET version 1 24 lines, + lines#24, + mc4@, mc5@, rc@, rmam@, sc@, smam@, use=att505, +tt505-22|pt505-22|gs5430-22|AT&T PT505 or 5430 GETSET version 1 22 lines, + lines#22, use=att505, +# +#### ------------------ TERMINFO FILE CAN BE SPLIT HERE --------------------- +# This cut mark helps make life less painful for people running ncurses tic +# on machines with relatively little RAM. The file can be broken in half here +# cleanly and compiled in sections -- no `use' references cross this cut +# going forward. +# + +#### Ampex (Dialogue) +# +# Yes, these are the same people who are better-known for making audio- and +# videotape. I'm told they are located in Redwood City, CA. +# + +# From: <cbosg!ucbvax!SRC:george> Fri Sep 11 22:38:32 1981 +# (ampex80: some capabilities merged in from SCO's entry -- esr) +ampex80|a80|d80|dialogue|dialogue80|ampex dialogue 80, + am, bw, ul, + cols#80, it#8, lines#24, + bel=^G, cbt=\EI, clear=\E*$<75>, cr=^M, cub1=^H, cud1=^J, + cuf1=^L, cup=\E=%p1%{32}%+%c%p2%{32}%+%c, cuu1=^K, + dch1=\EW, dl1=\ER$<5*>, ed=\Ey, el=\Et, ht=^I, hts=\E1, + ich1=\EQ, il1=\EE$<5*>, ind=^J, is2=\EA, rmso=\Ek, rmul=\Em, + smso=\Ej, smul=\El, tbc=\E3, +# This entry was from somebody anonymous, Tue Aug 9 20:11:37 1983, who wrote: +ampex175|ampex d175, + am, + cols#80, lines#24, + bel=^G, clear=\E+, cr=^M, cub1=^H, cud1=^J, cuf1=^L, + cup=\E=%p1%{32}%+%c%p2%{32}%+%c, cuu1=^K, dch1=\EW, + dl1=\ER, ed=\Ey, el=\Et, home=^^, ich1=\EQ, il1=\EE, ind=^J, + is2=\EX\EA\EF, kcub1=^H, kcud1=^J, kcuf1=^L, kcuu1=^K, + kdch1=\EW, kdl1=\ER, khome=^^, kich1=\EQ, kil1=\EE, ll=^^^K, + rmcup=\EF, rmso=\Ek, rmul=\Em, smcup=\EN, smso=\Ej, smul=\El, +# No backspace key in the main QWERTY cluster. Fortunately, it has a +# NEWLINE/PAGE key just above RETURN that sends a strange single-character +# code. Given a suitable Unix (one that lets you set an echo-erase-as-BS-SP-BS +# mode), this key can be used as the erase key; I find I like this. Because +# some people and some systems may not, there is another termcap ("ampex175") +# that suppresses this little eccentricity by omitting the relevant capability. +ampex175-b|ampex d175 using left arrow for erase, + kbs=^_, + use=ampex175, +# From: Richard Bascove <atd!dsd!rcb@ucbvax.berkeley.edu> +# (ampex210: removed obsolete ":kn#10:" -- esr) +ampex210|a210|ampex a210, + am, hs, xenl, + cols#80, it#8, lines#24, xmc#1, + cbt=\EI, clear=\E*, cub1=^H, cuf1=^L, + cup=\E=%p1%{32}%+%c%p2%{32}%+%c, cuu1=^K, dch1=\EW, + dl1=\ER, ed=\Ey, el=\Et, flash=\EU\EX\EU\EX\EU\EX\EU\EX, + fsl=\E.2, home=^^, ht=^I, ich1=\EQ, + if=/usr/share/tabset/std, il1=\EE, invis@, + is2=\EC\Eu\E'\E(\El\EA\E%\E{\E.2\EG0\Ed\En, kcub1=^H, + kcud1=^V, kcuf1=^L, kcuu1=^K, kf0=^A0\r, kf1=^A1\r, + kf2=^A2\r, kf3=^A3\r, kf4=^A4\r, kf5=^A5\r, kf6=^A6\r, + kf7=^A7\r, kf8=^A8\r, kf9=^A9\r, khome=^^, + tsl=\E.0\Eg\E}\Ef, use=adm+sgr, +# (ampex219: I added <rmam>/<smam> based on the init string, added <cvvis> +# from ampex219w, added <cnorm>=\E[?3l, irresistibly suggested by <cvvis>, +# and moved the padding to be *after* the caps -- esr) +ampex219|ampex-219|amp219|Ampex with Automargins, + hs, xenl, + cols#80, it#8, lines#24, + bel=^G, blink=\E[5m$<2>, bold=\E[1m$<2>, cbt=\E[Z, + clear=\E[H\E[2J$<50>, cnorm=\E[?3l, cr=^M, + csr=%i\E[%p1%2d;%p2%2dr, cub1=^H, cud1=\E[B, + cuf1=\E[C$<2>, cup=\E[%i%p1%d;%p2%dH$<5>, + cuu1=\E[A$<2>, cvvis=\E[?3h, dim=\E[1m, ed=\E[J$<50>, + el=\E[K$<3>, home=\E[H, ht=^I, ind=^J, + is2=\E>\E[?1l\E[?3l\E[?4l\E[?5l\E[?7h\E[?8h, + kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A, kf0=\E[21~, + kf1=\E[7~, kf2=\E[8~, kf3=\E[9~, kf4=\E[10~, kf5=\E[11~, + kf6=\E[17~, kf7=\E[18~, kf8=\E[19~, kf9=\E[20~, khome=\E[H, + rev=\E[7m, ri=\EM$<5>, rmam=\E[?7l, rmkx=\E>, + rmso=\E[m$<2>, rmul=\E[m$<2>, sgr0=\E[m$<2>, smam=\E[?7h, + smkx=\E=, smso=\E[7m$<2>, smul=\E[4m$<2>, +ampex219w|ampex-219w|amp219w|Ampex 132 cols, + cols#132, lines#24, + bel=^G, cr=^M, cud1=^J, ind=^J, + is2=\E>\E[?3h\E[?4l\E[?5l\E[?7h\E[?8h, use=ampex219, +# (ampex232: removed <if=/usr/share/tabset/ampex>, no file and no <hts> --esr) +ampex232|ampex-232|Ampex Model 232, + am, + cols#80, lines#24, xmc#1, + cbt=\EI, civis=\E.0, clear=\E+, cnorm=\E.4, cub1=^H, cud1=^V, + cuf1=^L, cup=\E=%p1%{32}%+%c%p2%{32}%+%c, cuu1=^K, + dch1=\EW, dl1=\ER$<5*/>, ed=\EY, el=\ET, + flash=\Eb$<200/>\Ed, ht=^I, ich1=\EQ, il1=\EE$<5*/>, + invis@, is2=\Eg\El, kbs=^H, kcub1=^H, kcud1=^V, kcuf1=^L, + kcuu1=^K, kf0=^A@\r, kf1=^AA\r, kf2=^AB\r, kf3=^AC\r, + kf4=^AD\r, kf5=^AE\r, kf6=^AF\r, kf7=^AG\r, kf8=^AH\r, + kf9=^AI\r, khome=^^, + use=adm+sgr, +# (ampex: removed <if=/usr/share/tabset/amp-132>, no file and no <hts> -- esr) +ampex232w|Ampex Model 232 / 132 columns, + cols#132, lines#24, + is2=\E\034Eg\El, use=ampex232, + +#### Ann Arbor (aa) +# +# Ann Arbor made dream terminals for hackers -- large screen sizes and huge +# numbers of function keys. At least some used monitors in portrait mode, +# allowing up to 76-character screen heights! They were reachable at: +# +# Ann Arbor Terminals +# 6175 Jackson Road +# Ann Arbor, MI 48103 +# (313)-663-8000 +# +# But in 1996 the phone number reaches some kitschy retail shop, and Ann Arbor +# can't be found on the Web; I fear they're long dead. R.I.P. +# + + +# Originally from Mike O'Brien@Rand and Howard Katseff at Bell Labs. +# Highly modified 6/22 by Mike O'Brien. +# split out into several for the various screen sizes by dave-yost@rand +# Modifications made 3/82 by Mark Horton +# Modified by Tom Quarles at UCB for greater efficiency and more diversity +# status line moved to top of screen, <flash> removed 5/82 +# Some unknown person at SCO then hacked the init strings to make them more +# efficient. +# +# assumes the following setup: +# A menu: 0000 1010 0001 0000 +# B menu: 9600 0100 1000 0000 0000 1000 0000 17 19 +# C menu: 56 66 0 0 9600 0110 1100 +# D menu: 0110 1001 1 0 +# +# Briefly, the settings are for the following modes: +# (values are for bit set/clear with * indicating our preference +# and the value used to test these termcaps) +# Note that many of these settings are irrelevent to the terminfo +# and are just set to the default mode of the terminal as shipped +# by the factory. +# +# A menu: 0000 1010 0001 0000 +# Block/underline cursor* +# blinking/nonblinking cursor* +# key click/no key click* +# bell/no bell at column 72* +# +# key pad is cursor control*/key pad is numeric +# return and line feed/return for <cr> key * +# repeat after .5 sec*/no repeat +# repeat at 25/15 chars per sec. * +# +# hold data until pause pressed/process data unless pause pressed* +# slow scroll/no slow scroll* +# Hold in area/don't hold in area* +# functions keys have default*/function keys disabled on powerup +# +# show/don't show position of cursor during page transmit* +# unused +# unused +# unused +# +# B menu: 9600 0100 1000 0000 0000 1000 0000 17 19 +# Baud rate (9600*) +# +# 2 bits of parity - 00=odd,01=even*,10=space,11=mark +# 1 stop bit*/2 stop bits +# parity error detection off*/on +# +# keyboard local/on line* +# half/full duplex* +# disable/do not disable keyboard after data transmission* +# +# transmit entire page/stop transmission at cursor* +# transfer/do not transfer protected characters* +# transmit all characters/transmit only selected characters* +# transmit all selected areas/transmit only 1 selected area* +# +# transmit/do not transmit line separators to host* +# transmit/do not transmit page tab stops tabs to host* +# transmit/do not transmit column tab stop tabs to host* +# transmit/do not transmit graphics control (underline,inverse..)* +# +# enable*/disable auto XON/XOFF control +# require/do not require receipt of a DC1 from host after each LF* +# pause key acts as a meta key/pause key is pause* +# unused +# +# unused +# unused +# unused +# unused +# +# XON character (17*) +# XOFF character (19*) +# +# C menu: 56 66 0 0 9600 0110 1100 +# number of lines to print data on (printer) (56*) +# +# number of lines on a sheet of paper (printer) (66*) +# +# left margin (printer) (0*) +# +# number of pad chars on new line to printer (0*) +# +# printer baud rate (9600*) +# +# printer parity: 00=odd,01=even*,10=space,11=mark +# printer stop bits: 2*/1 +# print/do not print guarded areas* +# +# new line is: 01=LF,10=CR,11=CRLF* +# unused +# unused +# +# D menu: 0110 1001 1 0 +# LF is newline/LF is down one line, same column* +# wrap to preceding line if move left from col 1*/don't wrap +# wrap to next line if move right from col 80*/don't wrap +# backspace is/is not destructive* +# +# display*/ignore DEL character +# display will not/will scroll* +# page/column tab stops* +# erase everything*/erase unprotected only +# +# editing extent: 0=display,1=line*,2=field,3=area +# +# unused +# + +annarbor4080|aa4080|ann arbor 4080, + am, + cols#80, lines#40, + bel=^G, clear=\014$<2>, cr=^M, cub1=^H, cud1=^J, cuf1=^_, + cup=\017%p2%{10}%/%{16}%*%p2%{10}%m%+%c%p1%?%p1%{19}%>%t%{12}%+%;%{64}%+%c, + cuu1=^N, home=^K, ht=^I, hts=^]^P1, ind=^J, kbs=^^, kcub1=^H, + kcud1=^J, kcuf1=^_, kcuu1=^N, khome=^K, tbc=^\^P^P, + +# Strange Ann Arbor terminal from BRL +aas1901|Ann Arbor K4080 w/S1901 mod, + am, + cols#80, lines#40, + bel=^G, clear=^L, cr=^M, cub1=^H, cud1=^J, cuf1=^_, cuu1=^N, + home=^K, ht=^I, ind=^J, kbs=^H, kcub1=^H, kcud1=^J, ll=^O\0c, + nel=^M^J, + +# If you're using the GNU termcap library, add +# :cS=\E[%p1%d;%p2%d;%p3%d;%p4%dp: +# to these capabilities. This is the nonstandard GNU termcap scrolling +# capability, arguments are: +# 1. Total number of lines on the screen. +# 2. Number of lines above desired scroll region. +# 3. Number of lines below (outside of) desired scroll region. +# 4. Total number of lines on the screen, the same as the first parameter. +# The generic Ann Arbor entry is the only one that uses this. +aaa+unk|aaa-unk|ann arbor ambassador (internal - don't use this directly), + am, km, mc5i, mir, xon, + cols#80, it#8, + bel=^G, blink=\E[5m, bold=\E[1m, cbt=\E[Z, + clear=\E[H\E[J$<156>, cr=^M, cub=\E[%p1%dD, cub1=^H, + cud=\E[%p1%dB, cud1=^K, cuf=\E[%p1%dC, cuf1=\E[C, + cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA, cuu1=\E[A, + dch=\E[%p1%dP, dch1=\E[P, dl=\E[%p1%dM, dl1=\E[M, ed=\E[J, + el=\E[K$<5>, home=\E[H, hpa=\E[%p1%{1}%+%dG, ht=^I, + hts=\EH, ich=\E[%p1%d@$<4*>, ich1=\E[@$<4>, il=\E[%p1%dL, + il1=\E[L$<3>, ind=^K, invis=\E[8m, is1=\E[m\E7\E[H\E9\E8, + is3=\E[1Q\E[>20;30l\EP`+x~M\E\\, kbs=^H, kcbt=\E[Z, + kclr=\E[J, kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A, + kdch1=\E[P, kdl1=\E[M, kf1=\EOA, kf10=\EOJ, kf11=\EOK, + kf12=\EOL, kf13=\EOM, kf14=\EON, kf15=\EOO, kf16=\EOP, + kf17=\EOQ, kf18=\EOR, kf19=\EOS, kf2=\EOB, kf20=\EOT, + kf21=\EOU, kf22=\EOV, kf23=\EOW, kf24=\EOX, kf3=\EOC, + kf4=\EOD, kf5=\EOE, kf6=\EOF, kf7=\EOG, kf8=\EOH, kf9=\EOI, + khome=\E[H, kich1=\E[@, kil1=\E[L, krmir=\E6, mc0=\E[0i, + mc4=^C, mc5=\E[v, mc5p=\E[%p1%dv, rc=\E8, + rep=%p1%c\E[%p2%{1}%-%db, rev=\E[7m, + rmkx=\EP`>y~[[J`8xy~[[A`4xy~[[D`6xy~[[C`2xy~[[B\E\\, + rmm=\E[>52l, rmso=\E[m, rmul=\E[m, sc=\E7, + sgr=\E[%?%p1%t7;%;%?%p2%t4;%;%?%p3%t7;%;%?%p4%t5;%;%?%p6%t1;%;m, + sgr0=\E[m, + smkx=\EP`>z~[[J`8xz~[[A`4xz~[[D`6xz~[[C`2xz~[[B\E\\, + smm=\E[>52h, smso=\E[7m, smul=\E[4m, tbc=\E[2g, + vpa=\E[%p1%{1}%+%dd, + +aaa+rv|ann arbor ambassador in reverse video, + blink=\E[5;7m, bold=\E[1;7m, invis=\E[7;8m, + is1=\E[7m\E7\E[H\E9\E8, rev=\E[m, rmso=\E[7m, rmul=\E[7m, + rs1=\E[H\E[7m\E[J$<156>, + sgr=\E[%?%p1%p3%|%!%t7;%;%?%p2%t4;%;%?%p4%t5;%;%?%p6%t1;%;%?%p7%t8;%;m, + sgr0=\E[7m\016, smso=\E[m, smul=\E[4;7m, +# Ambassador with the DEC option, for partial vt100 compatibility. +aaa+dec|ann arbor ambassador in dec vt100 mode, + acsc=aaffggjjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}, + csr=\E[%i%p1%d;%p2%dr, enacs=\E(0, rmacs=^N, + sgr=\E[%?%p1%p3%|%!%t7;%;%?%p2%t4;%;%?%p4%t5;%;%?%p6%t1;%;%?%p7%t8;%;m%?%p9%t\017%e\016%;, + smacs=^O, +aaa-18|ann arbor ambassador/18 lines, + lines#18, + is2=\E7\E[60;0;0;18p\E8, + rmcup=\E[60;0;0;18p\E[60;1H\E[K, smcup=\E[18;0;0;18p, use=aaa+unk, +aaa-18-rv|ann arbor ambassador/18 lines+reverse video, + use=aaa+rv, use=aaa-18, +aaa-20|ann arbor ambassador/20 lines, + lines#20, + is2=\E7\E[60;0;0;20p\E8, + rmcup=\E[60;0;0;20p\E[60;1H\E[K, smcup=\E[20;0;0;20p, use=aaa+unk, +aaa-22|ann arbor ambassador/22 lines, + lines#22, + is2=\E7\E[60;0;0;22p\E8, + rmcup=\E[60;0;0;22p\E[60;1H\E[K, smcup=\E[22;0;0;22p, use=aaa+unk, +aaa-24|ann arbor ambassador/24 lines, + lines#24, + is2=\E7\E[60;0;0;24p\E8, + rmcup=\E[60;0;0;24p\E[60;1H\E[K, smcup=\E[24;0;0;24p, use=aaa+unk, +aaa-24-rv|ann arbor ambassador/24 lines+reverse video, + use=aaa+rv, use=aaa-24, +aaa-26|ann arbor ambassador/26 lines, + lines#26, + is2=\E7\E[60;0;0;26p\E8, + rmcup=\E[60;0;0;26p\E[26;1H\E[K, + smcup=\E[H\E[J$<156>\E[26;0;0;26p, use=aaa+unk, +aaa-28|ann arbor ambassador/28 lines, + lines#28, + is2=\E7\E[60;0;0;28p\E8, + rmcup=\E[60;0;0;28p\E[28;1H\E[K, + smcup=\E[H\E[J$<156>\E[28;0;0;28p, use=aaa+unk, +aaa-30-s|aaa-s|ann arbor ambassador/30 lines w/status, + eslok, hs, + lines#29, + dsl=\E7\E[60;0;0;30p\E[1;1H\E[K\E[H\E8\r\n\E[K, + fsl=\E[>51l, is2=\r\n\E[A\E7\E[60;1;0;30p\E8, + rmcup=\E[60;1;0;30p\E[29;1H\E[K, + smcup=\E[H\E[J$<156>\E[30;1;0;30p\E[30;1H\E[K, + tsl=\E[>51h\E[1;%p1%dH\E[2K, + use=aaa+unk, +aaa-30-s-rv|aaa-s-rv|ann arbor ambassador/30 lines+status+reverse video, + use=aaa+rv, use=aaa-30-s, +aaa-s-ctxt|aaa-30-s-ctxt|ann arbor ambassador/30 lines+status+save context, + rmcup=\E[60;1;0;30p\E[59;1H\E[K, + smcup=\E[30;1H\E[K\E[30;1;0;30p, use=aaa-30-s, +aaa-s-rv-ctxt|aaa-30-s-rv-ct|ann arbor ambassador/30 lines+status+save context+reverse video, + rmcup=\E[60;1;0;30p\E[59;1H\E[K, + smcup=\E[30;1H\E[K\E[30;1;0;30p, use=aaa-30-s-rv, +aaa|aaa-30|ambas|ambassador|ann arbor ambassador/30 lines, + lines#30, + is2=\E7\E[60;0;0;30p\E8, + rmcup=\E[60;0;0;30p\E[30;1H\E[K, + smcup=\E[H\E[J$<156>\E[30;0;0;30p, use=aaa+unk, +aaa-30-rv|aaa-rv|ann arbor ambassador/30 lines in reverse video, + use=aaa+rv, use=aaa-30, +aaa-30-ctxt|aaa-ctxt|ann arbor ambassador/30 lines; saving context, + rmcup=\E[60;0;0;30p\E[60;1H\E[K, smcup=\E[30;0;0;30p, + use=aaa-30, +aaa-30-rv-ctxt|aaa-rv-ctxt|ann arbor ambassador/30 lines reverse video; saving context, + rmcup=\E[60;0;0;30p\E[60;1H\E[K, smcup=\E[30;0;0;30p, + use=aaa+rv, use=aaa-30, +aaa-36|ann arbor ambassador/36 lines, + lines#36, + is2=\E7\E[60;0;0;36p\E8, + rmcup=\E[60;0;0;36p\E[36;1H\E[K, + smcup=\E[H\E[J$<156>\E[36;0;0;36p, use=aaa+unk, +aaa-36-rv|ann arbor ambassador/36 lines+reverse video, + use=aaa+rv, use=aaa-36, +aaa-40|ann arbor ambassador/40 lines, + lines#40, + is2=\E7\E[60;0;0;40p\E8, + rmcup=\E[60;0;0;40p\E[40;1H\E[K, + smcup=\E[H\E[J$<156>\E[40;0;0;40p, use=aaa+unk, +aaa-40-rv|ann arbor ambassador/40 lines+reverse video, + use=aaa+rv, use=aaa-40, +aaa-48|ann arbor ambassador/48 lines, + lines#48, + is2=\E7\E[60;0;0;48p\E8, + rmcup=\E[60;0;0;48p\E[48;1H\E[K, + smcup=\E[H\E[J$<156>\E[48;0;0;48p, use=aaa+unk, +aaa-48-rv|ann arbor ambassador/48 lines+reverse video, + use=aaa+rv, use=aaa-48, +aaa-60-s|ann arbor ambassador/59 lines+status, + eslok, hs, + lines#59, + dsl=\E7\E[60;0;0;60p\E[1;1H\E[K\E[H\E8\r\n\E[K, + fsl=\E[>51l, is2=\r\n\E[A\E7\E[60;1;0;60p\E8, + tsl=\E[>51h\E[1;%p1%dH\E[2K, + use=aaa+unk, +aaa-60-s-rv|ann arbor ambassador/59 lines+status+reverse video, + use=aaa+rv, use=aaa-60-s, +aaa-60-dec-rv|ann arbor ambassador/dec mode+59 lines+status+rev video, + use=aaa+dec, use=aaa+rv, use=aaa-60-s, +aaa-60|ann arbor ambassador/60 lines, + lines#60, + is2=\E7\E[60;0;0;60p\E[1Q\E[m\E[>20;30l\E8, use=aaa+unk, +aaa-60-rv|ann arbor ambassador/60 lines+reverse video, + use=aaa+rv, use=aaa-60, +aaa-db|ann arbor ambassador 30/destructive backspace, + cub1=\E[D, is3=\E[1Q\E[m\E[>20l\E[>30h, + use=aaa-30, + +guru|guru-33|guru+unk|ann arbor guru/33 lines 80 cols, + lines#33, + flash=\E[>59h$<100>\E[>59l, + is2=\E7\E[255;0;0;33;80;80p\E8\E[J, is3=\E[>59l, + rmcup=\E[255p\E[255;1H\E[K, smcup=\E[33p, + use=aaa+unk, +guru+rv|guru changes for reverse video, + flash=\E[>59l$<100>\E[>59h, is3=\E[>59h, +guru-rv|guru-33-rv|ann arbor guru/33 lines+reverse video, + use=guru+rv, use=guru-33, +guru+s|guru status line, + eslok, hs, + dsl=\E7\E[;0p\E[1;1H\E[K\E[H\E8\r\n\E[K, fsl=\E[>51l, + rmcup=\E[255;1p\E[255;1H\E[K, smcup=, + tsl=\E[>51h\E[1;%p1%dH\E[2K, +guru-nctxt|guru with no saved context, + smcup=\E[H\E[J$<156>\E[33p\E[255;1H\E[K, use=guru, +guru-s|guru-33-s|ann arbor guru/33 lines+status, + lines#32, + is2=\r\n\E[A\E7\E[255;1;0;33;80;80p\E8\E[J, + smcup=\E[33;1p\E[255;1H\E[K, + use=guru+s, use=guru+unk, +guru-24|ann arbor guru 24 lines, + cols#80, lines#24, + is2=\E7\E[255;0;0;24;80;80p\E8\E[J, smcup=\E[24p, use=guru+unk, +guru-44|ann arbor guru 44 lines, + cols#97, lines#44, + is2=\E7\E[255;0;0;44;97;100p\E8\E[J, smcup=\E[44p, use=guru+unk, +guru-44-s|ann arbor guru/44 lines+status, + lines#43, + is2=\r\n\E[A\E7\E[255;1;0;44;80;80p\E8\E[J, + smcup=\E[44;1p\E[255;1H\E[K, + use=guru+s, use=guru+unk, +guru-76|guru with 76 lines by 89 cols, + cols#89, lines#76, + is2=\E7\E[255;0;0;76;89;100p\E8\E[J, smcup=\E[76p, use=guru+unk, +guru-76-s|ann arbor guru/76 lines+status, + cols#89, lines#75, + is2=\r\n\E[A\E7\E[255;1;0;76;89;100p\E8\E[J, + smcup=\E[76;1p\E[255;1H\E[K, + use=guru+s, use=guru+unk, +guru-76-lp|guru-lp|guru with page bigger than line printer, + cols#134, lines#76, + is2=\E7\E[255;0;0;76;134;134p\E8\E[J, smcup=\E[76p, use=guru+unk, +guru-76-w|guru 76 lines by 178 cols, + cols#178, lines#76, + is2=\E7\E[255;0;0;76;178;178p\E8\E[J, smcup=\E[76p, use=guru+unk, +guru-76-w-s|ann arbor guru/76 lines+status+wide, + cols#178, lines#75, + is2=\r\n\E[A\E7\E[255;1;0;76;178;178p\E8\E[J, + smcup=\E[76;1p\E[255;1H\E[K, + use=guru+s, use=guru+unk, +guru-76-wm|guru 76 lines by 178 cols with 255 cols memory, + cols#178, lines#76, + is2=\E7\E[255;0;0;76;178;255p\E8\E[J, smcup=\E[76p, use=guru+unk, +aaa-rv-unk|ann arbor unknown type, + lh#0, lw#0, nlab#0, + blink=\E[5;7m, bold=\E[1;7m, home=\E[H, invis=\E[7;8m, + is1=\E[7m\E7\E[H\E9\E8, rev=\E[m, rmso=\E[7m, rmul=\E[7m, + rs1=\E[H\E[7m\E[J, + sgr=\E[%?%p1%!%t7;%;%?%p2%t4;%;%?%p3%t7;%;%?%p4%t5;%;%?%p6%t1;%;%?%p7%t8;%;m, + sgr0=\E[7m, smso=\E[m, smul=\E[4;7m, + +#### Applied Digital Data Systems (adds) +# +# ADDS itself is long gone. ADDS was bought by NCR, and the same group made +# ADDS and NCR terminals. When AT&T and NCR merged, the engineering for +# terminals was merged again. Then AT&T sold the terminal business to +# SunRiver, which later changed its name to Boundless Technologies. The +# engineers from Teletype, AT&T terminals, ADDS, and NCR (who are still there +# as of early 1995) are at: +# +# Boundless Technologies +# 100 Marcus Boulevard +# Hauppauge, NY 11788-3762 +# Vox: (800)-231-5445 +# Fax: (516)-342-7378 +# Web: http://boundless.com +# +# Their voice mail used to describe the place as "SunRiver (formerly ADDS)". +# In 1995 Boundless acquired DEC's terminals business. +# + +# Regent: lowest common denominator, works on all regents. +# (regent: renamed ":bc:" to ":le:" -- esr) +regent|Adds Regent Series, + am, + cols#80, lines#24, + bel=^G, clear=^L, cr=^M, cub1=^U, cud1=^J, cuf1=^F, cuu1=^Z, + home=\EY\s\s, ind=^J, ll=^A, +# Regent 100 has a bug where if computer sends escape when user is holding +# down shift key it gets confused, so we avoid escape. +regent100|Adds Regent 100, + xmc#1, + bel=^G, cup=\013%p1%{32}%+%c%p2%p2%{6}%*%+\020%c, + kf0=^B1\r, kf1=^B2\r, kf2=^B3\r, kf3=^B4\r, kf4=^B5\r, + kf5=^B6\r, kf6=^B7\r, kf7=^B8\r, lf0=F1, lf1=F2, lf2=F3, + lf3=F4, lf4=F5, lf5=F6, lf6=F7, lf7=F8, rmso=\E0@, rmul=\E0@, + sgr0=\E0@, smso=\E0P, smul=\E0`, + use=regent, +regent20|Adds Regent 20, + bel=^G, cup=\EY%p1%{32}%+%c%p2%{32}%+%c, ed=\Ek, el=\EK, use=regent, +regent25|Adds Regent 25, + bel=^G, kcub1=^U, kcud1=^J, kcuf1=^F, kcuu1=^Z, khome=^A, use=regent20, +regent40|Adds Regent 40, + xmc#1, + bel=^G, dl1=\El$<2*>, il1=\EM$<2*>, kf0=^B1\r, kf1=^B2\r, + kf2=^B3\r, kf3=^B4\r, kf4=^B5\r, kf5=^B6\r, kf6=^B7\r, + kf7=^B8\r, lf0=F1, lf1=F2, lf2=F3, lf3=F4, lf4=F5, lf5=F6, + lf6=F7, lf7=F8, rmso=\E0@, rmul=\E0@, sgr0=\E0@, smso=\E0P, + smul=\E0`, + use=regent25, +regent40+|Adds Regent 40+, + is2=\EB, use=regent40, +regent60|regent200|Adds Regent 60, + dch1=\EE, is2=\EV\EB, kdch1=\EE, kich1=\EF, krmir=\EF, + rmir=\EF, rmso=\ER\E0@\EV, smir=\EF, smso=\ER\E0P\EV, + use=regent40+, +# From: <edward@onyx.berkeley.edu> Thu Jul 9 09:27:33 1981 +# (viewpoint: added <kcuf1>, function key, and <dl1> capabilities -- esr) +viewpoint|addsviewpoint|adds viewpoint, + am, + cols#80, lines#24, + bel=^G, clear=^L, cnorm=\017\E0`, cr=^M, cub1=^H, cud1=^J, + cuf1=^F, cup=\EY%p1%{32}%+%c%p2%{32}%+%c, cuu1=^Z, + cvvis=\017\E0P, dl1=\El, ed=\Ek$<16.1*>, el=\EK$<16>, + ind=^J, is2=\017\E0`, kcub1=^U, kcud1=^J, kcuf1=^F, kcuu1=^Z, + kf0=^B1, kf2=^B2, kf3=^B!, kf4=^B", kf5=^B#, khome=^A, ll=^A, + rmso=^O, rmul=^O, sgr0=^O, smso=^N, smul=^N, +# Some viewpoints have bad ROMs that foo up on ^O +screwpoint|adds viewpoint with ^O bug, + cvvis@, rmso@, rmul@, smso@, smul@, use=viewpoint, + +# From: Jay S. Rouman <jsr@dexter.mi.org> 5 Jul 92 +# The <civis>/<cnorm>/<sgr>/<sgr0> strings were added by ESR from specs. +# Theory; the vp3a+ wants \E0%c to set highlights, where normal=01000000, +# underline=01100000, rev=01010000, blink=01000010,dim=01000001, +# invis=01000100 and %c is the logical or of desired attributes. +# There is also a `tag bit' enabling attributes, set by \E) and unset by \E(. +vp3a+|viewpoint3a+|adds viewpoint 3a+, + am, bw, + cols#80, it#8, lines#24, + civis=^W, clear=\E*$<80>, cnorm=^X, cr=^M, cub1=^H, cud1=^J, + cuf1=^L, cup=\E=%p1%{32}%+%c%p2%{32}%+%c, cuu1=^K, + ed=\EY$<80>, el=\ET, home=^^, ht=^I, ind=^J, kbs=^H, kcub1=^H, + kcud1=^J, kcuf1=^L, kcuu1=^K, khome=^^, nel=^M^J, rmso=\E(, + sgr=\E0%{64}%?%p1%tQ%|%;%?%p2%t%{96}%|%;%?%p3%tP%|%;%?%p4%t%{2}%|%;%?%p5%t%{1}%|%;%?%p7%tD%|%;%c\E), + sgr0=\E(, smso=\E0Q\E), +vp60|viewpoint60|addsvp60|adds viewpoint60, + use=regent40, +# +# adds viewpoint 90 - from cornell +# Note: emacs sends ei occasionally to insure the terminal is out of +# insert mode. This unfortunately puts the viewpoint90 IN insert +# mode. A hack to get around this is <ich1=\EF\s\EF^U>. (Also, +# - :ei=:im=: must be present in the termcap translation.) +# - <xhp> indicates glitch that attributes stick to location +# - <msgr> means it's safe to move in standout mode +# - <clear=\EG\Ek>: clears screen and visual attributes without affecting +# the status line +# Function key and label capabilities merged in from SCO. +vp90|viewpoint90|adds viewpoint 90, + bw, msgr, xhp, + cols#80, lines#24, + clear=\EG\Ek, cub1=^H, cud1=^J, cuf1=^F, + cup=\EY%p1%{32}%+%c%p2%{32}%+%c, cuu1=^Z, dch1=\EE, + dl1=\El, ed=\Ek, el=\EK, home=\EY\s\s, ht=^I, + ich1=\EF \EF\025, ind=^J, kbs=^H, kcub1=^U, kcud1=^J, + kcuf1=^F, kcuu1=^Z, kf0=^B1\r, kf1=^B2\r, kf10=^B;\r, + kf2=^B3\r, kf3=^B4\r, kf4=^B5\r, kf5=^B6\r, kf6=^B7\r, + kf7=^B8\r, kf8=^B9\r, kf9=^B\:\r, khome=^A, lf0=F1, lf1=F2, + lf10=F11, lf2=F3, lf3=F4, lf4=F5, lf5=F6, lf6=F7, lf7=F8, lf8=F9, + lf9=F10, ll=^A, rmso=\ER\E0@\EV, rmul=\ER\E0@\EV, + sgr0=\ER\E0@\EV, smso=\ER\E0Q\EV, smul=\ER\E0`\EV, +# Note: if return acts weird on a980, check internal switch #2 +# on the top chip on the CONTROL pc board. +adds980|a980|adds consul 980, + am, + cols#80, lines#24, + bel=^G, clear=\014$<1>\013@, cr=^M, cub1=^H, cud1=^J, + cuf1=\E^E01, cup=\013%p1%{64}%+%c\E\005%p2%2d, + dl1=\E\017$<13>, il1=\E\016$<13>, ind=^J, kf0=\E0, kf1=\E1, + kf2=\E2, kf3=\E3, kf4=\E4, kf5=\E5, kf6=\E6, kf7=\E7, kf8=\E8, + kf9=\E9, rmso=^O, sgr0=^O, smso=^Y^^^N, + +#### C. Itoh Electronics +# +# As of 1995 these people no longer make terminals (they're still in the +# printer business). Their terminals were all clones of the DEC VT series. +# They're located in Orange County, CA. +# + +# CIT 80 - vt-52 emulator, the termcap has been modified to remove +# the delay times and do an auto tab set rather than the indirect +# file used in vt100. +cit80|cit-80|citoh 80, + am, + cols#80, lines#24, + clear=\E[H\EJ, cr=^M, cub1=^H, cuf1=\E[C, + cup=\E[%i%p1%2d;%p2%2dH, cuu1=\E[A, ed=\EJ, el=\EK, ff=^L, + ind=^J, is2=\E>, kcub1=\EOD, kcud1=\EOB, kcuf1=\EOC, + kcuu1=\EOA, rmkx=\E[?1l\E>, smkx=\E[?1h\E=, +# From: Tim Wood <mtxinu!sybase!tim> Fri Sep 27 09:39:12 PDT 1985 +# (cit101: added <rmam>/<smam> based on init string, merged this with c101 -- esr) +cit101|citc|C.itoh fast vt100, + am, xenl, + cols#80, lines#24, + bel=^G, clear=\E[H\E[2J, cnorm=\E[V\E8, cub1=^H, cuf1=\E[C, + cup=\E[%i%p1%d;%p2%dH, cuu1=\E[A, cvvis=\E7\E[U, + dch1=\E[P, dl1=\E[M, ed=\E[J, el=\E[K, + flash=\E[?5h$<200/>\E[?5l, ich1=\E[@, il1=\E[L, + is2=\E>\E[?3l\E[?4l\E[?5l\E[?7h\E[?8h\E[3g\E[>5g, + kcub1=\EOD, kcud1=\EOB, kcuf1=\EOC, kcuu1=\EOA, + rmam=\E[?7l, rmkx=\E[?1l\E>, rmso=\E[m, rmul=\E[m, + sgr0=\E[m, smam=\E[?7h, smkx=\E[?1h\E=, smso=\E[7m, + smul=\E[4m, +# CIE Terminals CIT-101e from Geoff Kuenning <callan!geoff> via BRL +# The following termcap entry was created from the Callan cd100 entry. The +# last two lines (with the capabilities in caps) are used by RM-cobol to allow +# full selection of combinations of reverse video, underline, and blink. +# (cit101e: removed unknown :f0=\EOp:f1=\EOq:f2=\EOr:f3=\EOs:f4=\EOt:f5=\EOu:\ +# f6=\EOv:f7=\EOw:f8=\EOx:f9=\EOy:AB=\E[0;5m:AL=\E[m:AR=\E[0;7m:AS=\E[0;5;7m:\ +# :NB=\E[0;1;5m:NM=\E[0;1m:NR=\E[0;1;7m:NS=\E[0;1;5;7m: -- esr) +cit101e|C. Itoh CIT-101e, + am, mir, msgr, + cols#80, it#8, lines#24, + acsc=, clear=\E[H\E[J, cnorm=, csr=\E[%i%p1%2d;%p2%2dr, + cud1=\E[B, cuf1=\E[C, cup=\E[%i%p1%2d;%p2%2dH, cuu1=\E[A, + cvvis=\E[?1l\E[?4l\E[?7h, dch1=\E[P, dl1=\E[M, ed=\E[J, + el=\E[K, if=/usr/share/tabset/vt100, il1=\E[L, + kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A, kf0=\EOT, + kf1=\EOP, kf2=\EOQ, kf3=\EOR, kf4=\EOS, kf5=\EOm, kf6=\EOl, + kf7=\EOM, kf8=\EOn, rc=\E8, ri=\EM, rmacs=^O, rmir=\E[4l, + rmkx=\E>, rmso=\E[m, rmul=\E[m, sc=\E7, smacs=^N, smir=\E[4h, + smkx=\E=, smso=\E[7m, smul=\E[4m, +# From: David S. Lawyer, June 1997: +# The CIT 101-e was made in Japan in 1983-4 and imported by CIE +# Terminals in Irvine, CA. It was part of CITOH Electronics. In the +# late 1980's CIT Terminals went out of business. +# There is no need to use the initialization string is=... (by invoking +# tset or setterm etc.) provided that the terminal has been manually set +# up (and the setup saved with ^S) to be compatible with this termcap. To be +# compatible it should be in ANSI mode (not VT52). A set-up that +# works is to set all the manually setable stuff to factory defaults +# by pressing ^D in set-up mode. Then increse the brighness with the +# up-arrow key since the factory default will likely be dim on an old +# terminal. Then change any options you want (provided that they are +# compatible with the termcap). For my terminal I set: Screen +# Background: light; Keyclicks: silent; Auto wraparound: on; CRT saver: +# on. I also set up mine for parity (but you may not need it). Then +# save the setup with ^S. +# (cit101e-rv: added empty <rmcup> to suppress a tic warning. --esr) +cit101e-rv|Citoh CIT-101e (sets reverse video), + am, eo, mir, msgr, xenl, xon, + cols#80, it#8, lines#24, + bel=^G, blink=\E[5m, bold=\E[1m, cbt=\E[Z, civis=\E[1v, + clear=\E[H\E[J, cnorm=\E[0;3;4v, cr=^M, + csr=\E[%i%p1%d;%p2%dr, cub=\E[%p1%dD, cub1=^H, + cud=\E[%p1%dB, cud1=\E[B, cuf=\E[%p1%dC, cuf1=\E[C, + cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA, cuu1=\E[A, + cvvis=\E[3;5v, dch=\E[%p1%dP, dch1=\E[P, dl=\E[%p1%dM, + dl1=\E[M, ed=\E[J, el=\E[K, flash=\E[?5l\E[?5h$<200/>, + home=\E[H, hpa=\E[%i%p1%dG, ht=^I, hts=\EH, ich=\E[%p1%d@, + ich1=\E[@, il=\E[%p1%dL, il1=\E[L, ind=^J, indn=\E[%p1%dS, + is2=\E<\E>\E[?1l\E[?3l\E[?4l\E[?5h\E[?7h\E[?8h\E[3g\E[>5g\E(B\E[m\E[20l\E[1;24r\E[24;1H, + kbs=\177, kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A, + kf1=\EOP, kf2=\EOQ, kf3=\EOR, kf4=\EOS, nel=\EE, rc=\E8, + rev=\E[7m, ri=\EM, rin=\E[%p1%dT, rmcup=, rmir=\E[4l, + rmso=\E[m, rmul=\E[m, rs1=\Ec\E[?7h\E[>5g, sc=\E7, + sgr0=\E[m, smcup=\E[>5g\E[?7h\E[?5h, smir=\E[4h, + smso=\E[7m, smul=\E[4m, tbc=\E[3g, u6=\E[%i%p1%d;%p2%dR, + u7=\E[6n, u8=\E[?6c, u9=\E[c, +cit101e-n|CIT-101e w/o am, + am@, + cvvis=\E[?1l\E[?4l\E[?7l, kbs=^H, kcub1=^H, kcud1=^J, use=cit101e, +cit101e-132|CIT-101e with 132 cols, + cols#132, + kbs=^H, kcub1=^H, kcud1=^J, use=cit101e, +cit101e-n132|CIT-101e with 132 cols w/o am, + am@, + cols#132, + cvvis=\E[?1l\E[?4l\E[?7l, kbs=^H, kcub1=^H, kcud1=^J, use=cit101e, +# CIE Terminals CIT-500 from BRL +# The following SET-UP modes are assumed for normal operation: +# GENERATE_XON/XOFF:YES DUPLEX:FULL NEWLINE:OFF +# AUTOWRAP:ON MODE:ANSI SCREEN_LENGTH:64_LINES +# DSPLY_CNTRL_CODES?NO PAGE_WIDTH:80 EDIT_MODE:OFF +# Other SET-UP modes may be set for operator convenience or communication +# requirements. +# Hardware tabs are assumed to be set every 8 columns; they can be set up +# by the "reset", "tset", or "tabs" utilities. No delays are specified; use +# "stty ixon -ixany" to enable DC3/DC1 flow control! +# (cit500: I added <rmam>/<smam> based on the init string -- esr) +cit500|CIE Terminals CIT-500, + mir, msgr, xon, + cols#80, it#8, lines#64, vt#3, + acsc=, bel=^G, blink=\E[5m, bold=\E[1m, cbt=\E[Z, + clear=\E[H\E[J, cr=^M, csr=\E[%i%p1%d;%p2%dr, + cub=\E[%p1%dD, cub1=^H, cud=\E[%p1%dB, cud1=^J, + cuf=\E[%p1%dC, cuf1=\E[C, cup=\E[%i%p1%d;%p2%dH, + cuu=\E[%p1%dA, cuu1=\EM, dch1=\E[P, dl=\E[%p1%dM, dl1=\E[M, + ed=\EJ, el=\EK, home=\E[H, ht=^I, hts=\EH, il=\E[%p1%dL, + il1=\E[L, ind=^J, is2=\E<\E)0, kbs=^H, kcbt=\E[Z, kcub1=\EOD, + kcud1=\EOB, kcuf1=\EOC, kcuu1=\EOA, kdch1=\E[P, kdl1=\E[M, + ked=\EJ, kel=\EK, kf0=\EOP, kf1=\EOQ, kf2=\EOR, kf3=\EOS, + kf4=\EOU, kf5=\EOV, kf6=\EOW, kf7=\EOX, kf8=\EOY, kf9=\EOZ, + khome=\E[H, kich1=\E[4h, kil1=\E[L, krmir=\E[4l, lf0=PF1, + lf1=PF2, lf2=PF3, lf3=PF4, lf4=F15, lf5=F16, lf6=F17, lf7=F18, + lf8=F19, lf9=F20, ll=\E[64H, nel=\EE, rc=\E8, rev=\E[7m, + ri=\EM, rmacs=^O, rmam=\E[?7l, rmir=\E[4l, rmkx=\E[?1l\E>, + rmso=\E[m, rmul=\E[m, + rs1=\E<\E2\E[20l\E[?6l\E[r\E[m\E[q\E(B\017\E)0\E>, + sc=\E7, sgr0=\E[m, smacs=^N, smam=\E[?7h, smir=\E[4h, + smkx=\E[?1h\E=, smso=\E[7m, smul=\E[4m, tbc=\E[3g, + +# C. Itoh printers begin here +citoh|ci8510|8510|c.itoh 8510a, + cols#80, it#8, + bold=\E!, cub1@, + is2=\E(009\,017\,025\,033\,041\,049\,057\,065\,073., + rep=\ER%p2%03d%p1%c, ri=\Er, rmul=\EY, sgr0=\E"\EY, + smul=\EX, + use=lpr, +citoh-pica|citoh in pica, + is1=\EN, use=citoh, +citoh-elite|citoh in elite, + cols#96, + is1=\EE, + is2=\E(009\,017\,025\,033\,041\,049\,057\,065\,073\,081\,089., use=citoh, +citoh-comp|citoh in compressed, + cols#136, + is1=\EQ, + is2=\E(009\,017\,025\,033\,041\,049\,057\,065\,073\,081\,089\,097\,105\,113\,121\,129., use=citoh, +# citoh has infinite cols because we don't want lp ever inserting \n\t**. +citoh-prop|citoh-ps|ips|citoh in proportional spacing mode, + cols#32767, + is1=\EP, use=citoh, +citoh-6lpi|citoh in 6 lines per inch mode, + is3=\EA, use=citoh, +citoh-8lpi|citoh in 8 lines per inch mode, + lines#88, + is3=\EB, use=citoh, + +#### Control Data (cdc) +# + +cdc456|cdc 456 terminal, + am, + cols#80, lines#24, + bel=^G, clear=^Y^X, cr=^M, cub1=^H, cud1=^J, cuf1=^L, + cup=\E1%p1%{32}%+%c%p2%{32}%+%c, cuu1=^Z, dl1=\EJ, ed=^X, + el=^V, home=^Y, il1=\EL, ind=^J, + +# Assorted CDC terminals from BRL (improvements by DAG & Ferd Brundick) +cdc721|CDC Viking, + am, + cols#80, lines#24, + clear=^L, cuf1=^X, cup=\002%p2%{32}%+%c%p1%{32}%+%c, + cuu1=^W, el=^K, home=^Y, kcub1=^H, kcud1=^J, kcuf1=^I, + kcuu1=^W, khome=^Y, +cdc721ll|CDC Vikingll, + am, + cols#132, lines#24, + clear=^L, cuf1=^X, cup=\002%p2%{32}%+%c%p1%{32}%+%c, + cuu1=^W, el=^K, home=^Y, kcub1=^H, kcud1=^J, kcuf1=^I, + kcuu1=^W, khome=^Y, +# (cdc752: the BRL entry had :ll=\E1 ^Z: commented out +cdc752|CDC 752, + am, bw, xhp, + cols#80, lines#24, + bel=^G, clear=\030\E1\s\s, cr=^M, cub1=^H, cud1=^J, cuf1=^U, + cup=\E1%p2%{32}%+%c%p1%{32}%+%c, cuu1=^Z, el=^V, + home=\E1\s\s, ind=^J, ll=^Y, rs1=\E1 \030\002\003\017, +# CDC 756 +# The following switch/key settings are assumed for normal operation: +# 96 chars SCROLL FULL duplex not BLOCK +# Other switches may be set according to communication requirements. +# Insert/delete-character cannot be used, as the whole display is affected. +# "so" & "se" are commented out until jove handles "sg" correctly. +cdc756|CDC 756, + am, bw, + cols#80, lines#24, + bel=^G, clear=^Y^X, cr=^M, cub1=^H, cud1=^J, cuf1=^U, + cup=\E1%p2%{32}%+%c%p1%{32}%+%c, cuu1=^Z, + dl1=\EJ$<6*/>, ed=^X, el=^V, home=^Y, il1=\EL$<6*/>, ind=^J, + kbs=^H, kcub1=^H, kcud1=^J, kcuf1=^U, kcuu1=^Z, kdch1=\EI, + kdl1=\EL, ked=^X, kel=^V, kf0=\EA, kf1=\EB, kf2=\EC, kf3=\ED, + kf4=\EE, kf5=\EF, kf6=\EG, kf7=\EH, kf8=\Ea, kf9=\Eb, khome=^Y, + khts=^O, kich1=\EK, kil1=\EL, lf0=F1, lf1=F2, lf2=F3, lf3=F4, + lf4=F5, lf5=F6, lf6=F7, lf7=F8, lf8=F9, lf9=F10, ll=^Y^Z, + rs1=\031\030\002\003\017, +# +# CDC 721 from Robert Viduya, Ga. Tech. <ihnp4!gatech!gitpyr!robert> via BRL. +# +# Part of the long initialization string defines the "DOWN" key to the left +# of the tab key to send an ESC. The real ESC key is positioned way out +# in right field. +# +# The termcap won't work in 132 column mode due to the way it it moves the +# cursor. Termcap doesn't have the capability (as far as I could tell) to +# handle the 721 in 132 column mode. +# +# (cdc721: changed :ri: to :sr: -- esr) +cdc721-esc|Control Data 721, + am, bw, msgr, xon, + cols#80, it#8, lines#30, + bel=^G, blink=^N, cbt=^^^K, clear=^L, cub1=^H, cud1=^Z, + cuf1=^X, cup=\002%p2%{32}%+%c%p1%{32}%+%c, cuu1=^W, + dch1=^^N, dim=^\, dl1=^^Q, ed=^^P, el=^K, home=^Y, hts=^^^RW, + ich1=^^O, il1=^^R, ind=\036W =\036U, invis=^^^R[, + is2=\036\022B\003\036\035\017\022\025\035\036E\036\022H\036\022J\036\022L\036\022N\036\022P\036\022Q\036\022\036\022\^\036\022b\036\022i\036W =\036\022Z\036\011C1-` `!k/o, + kbs=^H, kcub1=^H, kcud1=^Z, kcuf1=^X, kcuu1=^W, kf0=^^q, + kf1=^^r, kf2=^^s, kf3=^^t, kf4=^^u, kf5=^^v, kf6=^^w, kf7=^^x, + kf8=^^y, kf9=^^z, khome=^Y, ll=^B =, rev=^^D, + ri=\036W =\036V, rmir=, rmkx=^^^Rl, rmso=^^E, rmul=^], + sgr0=\017\025\035\036E\036\022\\, smir=, smkx=^^^Rk, + smso=^^D, smul=^\, tbc=^^^RY, + +#### Getronics +# +# Getronics is a Dutch electronics company that at one time was called +# `Geveke' and made async terminals; but (according to the company itself!) +# they've lost all their documentation on the command set. The hardware +# documentation suggests the terminals were actually manufactured by a +# Taiwanese electronics company named Cal-Comp. There are known +# to have been at least two models, the 33 and the 50. +# + +# The 50 seems to be a top end vt220 clone, with the addition of a higher +# screen resolution, a larger screen, at least 1 page of memory above and +# below the screen, apparently pages of memory right and left of the screen +# which can be panned, and about 75 function keys (15 function keys x normal, +# shift, control, func A, func B). It also has more setup possibilities than +# the vt220. The monitor case is dated November 1978 and the keyboard case is +# May 1982. +# +# The vt100 emulation works as is. The entry below describes the rather +# non-conformant (but more featureful) ANSI mode. +# +# From: Stephen Peterson <stv@utrecht.ow.nl>, 27 May 1995 +visa50|geveke visa 50 terminal in ansi 80 character mode, + bw, mir, msgr, + cols#80, lines#25, + acsc=0_aaffggh jjkkllmmnnooqqssttuuvvwwxx, bel=^G, + blink=\E[5m, bold=\E[1m, cbt=\E[Z, clear=\E[H\E[2J, cr=^M, + csr=\E[%i%p1%d;%p2%dr, cub=\E[%p1%dD, cub1=\E[D, + cud=\E[%p1%dB, cud1=\E[B, cuf=\E[%p1%dC, cuf1=\E[C, + cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA, cuu1=\E[A, + dch=\E[%p1%dX, dch1=\E[X, dim=\E[2m, dl=\E[%p1%dM, + dl1=\E[M, ed=\E[J, el=\E[K, flash=\E[?5h\E[?5l, home=\E[H, + hpa=\E[%i%p1%dG, ht=^I, ich=\E[%p1%d@, ich1=\E[@, + il=\E[%p1%dL, il1=\E[L, ind=^J, invis=\E[8m, + is2=\E0;2m\E[1;25r\E[25;1H\E[?3l\E[?7h\E[?8h, + ka1=\E[f, ka3=\EOQ, kb2=\EOP, kbs=^H, kc1=\EOR, kc3=\EOS, + kcub1=\E[D, kcud1=\E[A, kcuf1=\E[C, kcuu1=\E[A, kdch1=\177, + kdl1=\EOS, kf0=\E010, kf1=\E001, kf10=\E011, kf2=\E002, + kf3=\E003, kf4=\E004, kf5=\E005, kf6=\E006, kf7=\E007, + kf8=\E008, kf9=\E009, khome=\E[f, lf2=A delete char, + lf3=A insert line, lf4=A delete line, lf5=A clear, + lf6=A ce of/cf gn, lf7=A print, lf8=A on-line, + lf9=A funcl0=A send, nel=^M^J, rev=\E[7m, rmacs=\E[3l, + rmam=\E[?7l, rmir=\E[4l, rmkx=\E>, rmso=\E[0;2m, + rmul=\E[0m, sgr0=\E[0;2m, smacs=\E3h, smam=\E?7h, + smir=\E[4h, smkx=\E=, smso=\E[2;7m, smul=\E[4m, tbc=\E[3g, + vpa=\E[%i%p1%dd, + +#### Human Designed Systems (Concept) +# +# Human Designed Systems +# 400 Fehley Drive +# King of Prussia, PA 19406 +# Vox: (610)-277-8300 +# Fax: (610)-275-5739 +# Net: support@hds.com +# +# John Martin <john@hds.com> is their termcap expert. They're mostly out of +# the character-terminal business now (1995) and making X terminals. In +# particular, the whole `Concept' line described here was discontinued long +# ago. +# + +# From: <vax135!hpk> Sat Jun 27 07:41:20 1981 +# Extensive changes to c108 by arpavax:eric Feb 1982 +# Some unknown person at SCO then translated it to terminfo. +# +# There seem to be a number of different versions of the C108 PROMS +# (with bug fixes in its Z-80 program). +# +# The first one that we had would lock out the keyboard of you +# sent lots of short lines (like /usr/dict/words) at 9600 baud. +# Try that on your C108 and see if it sends a ^S when you type it. +# If so, you have an old version of the PROMs. +# +# You should configure the C108 to send ^S/^Q before running this. +# It is much faster (at 9600 baud) than the c100 because the delays +# are not fixed. +# new status line display entries for c108-8p: +# <is3> - init str #3 - setup term for status display - +# set programmer mode, select window 2, define window at last +# line of memory, set bkgnd stat mesg there, select window 0. +# +# <tsl> - to status line - select window 2, home cursor, erase to +# end-of-window, 1/2 bright on, goto(line#0, col#?) +# +# <fsl> - from status line - 1/2 bright off, select window 0 +# +# <dsl> - disable status display - set bkgnd status mesg with +# illegal window # +# +# There are probably more function keys that should be added but +# I don't know what they are. +# +# No delays needed on c108 because of ^S/^Q handshaking +# +c108|concept108|c108-8p|concept108-8p|concept 108 w/8 pages, + is3=\EU\E z"\Ev\001\177 !p\E ;"\E z \Ev \001\177p\Ep\n, + rmcup=\Ev \001\177p\Ep\r\n, + use=c108-4p, +c108-4p|concept108-4p|concept 108 w/4 pages, + eslok, hs, xon, + pb@, + acsc=jEkTl\\mMqLxU, cnorm=\Ew, cr=^M, + cup=\Ea%p1%?%p1%{95}%>%t\001%{96}%-%;%{32}%+%c%p2%?%p2%{95}%>%t\001%{96}%-%;%{32}%+%c, + cvvis=\EW, dch1=\E 1$<16*>, dsl=\E ;\177, fsl=\Ee\E z\s, + ind=^J, is1=\EK\E!\E F, + is3=\EU\E z"\Ev\177 !p\E ;"\E z \Ev \001 p\Ep\n, + rmacs=\Ej\s, rmcup=\Ev \001 p\Ep\r\n, smacs=\Ej!, + smcup=\EU\Ev 8p\Ep\r\E\025, + tsl=\E z"\E?\E\005\EE\Ea %+\s, use=c100, +c108-rv|c108-rv-8p|concept 108 w/8 pages in reverse video, + rmcup=\Ev \002 p\Ep\r\n, smcup=\EU\Ev 8p\Ep\r, + use=c108-rv-4p, +c108-rv-4p|concept108rv4p|concept 108 w/4 pages in reverse video, + flash=\EK$<200>\Ek, is1=\Ek, rmso=\Ee, smso=\EE, + use=c108-4p, +c108-w|c108-w-8p|concept108-w-8|concept108-w8p|concept 108 w/8 pages in wide mode, + cols#132, + is1=\E F\E", rmcup=\Ev ^A0\001D\Ep\r\n, + smcup=\EU\Ev 8\001D\Ep\r, use=c108-8p, + +# Concept 100: +# These have only window relative cursor addressing, not screen +# relative. To get it to work right here, smcup/rmcup (which +# were invented for the concept) lock you into a one page +# window for screen style programs. +# +# To get out of the one page window, we use a clever trick: +# we set the window size to zero ("\Ev " in rmcup) which the +# terminal recognizes as an error and resets the window to all +# of memory. +# +# This trick works on c100 but does not on c108, sigh. +# +# Some tty drivers use cr3 for concept, others use nl3, hence +# the delays on cr and ind below. This padding is only needed at +# 9600 baud and up. One or the other is commented out depending on +# local conventions. +# +# 2 ms padding on <rmcup> isn't always enough. 6 works fine. Maybe +# less than 6 but more than 2 will work. +# +# Note: can't use function keys f7-f10 because they are +# indistinguishable from arrow keys (!), also, del char and +# clear eol use xon/xoff so they probably won't work very well. +# +# Also note that we don't define insrt/del char/delline/eop/send +# because they don't transmit unless we reset them - I figured +# it was a bad idea to clobber their definitions. +# +# The <mc5> sequence changes the escape character to ^^ so that +# escapes will be passed through to the printer. Only trouble +# is that ^^ won't be - ^^ was chosen to be unlikely. +# Unfortunately, if you're sending raster bits through to be +# plotted, any character you choose will be likely, so we lose. +# +# \EQ"\EY(^W (send anything from printer to host, for xon/xoff) +# cannot be # in is2 because it will hang a c100 with no printer +# if sent twice. +c100|concept100|concept|c104|c100-4p|hds concept 100, + am, eo, mir, ul, xenl, + cols#80, lines#24, pb#9600, vt#8, + bel=^G, blink=\EC, clear=\E?\E\005$<2*>, cr=$<9>\r, + cub1=^H, cud1=^J, cuf1=\E=, + cup=\Ea%p1%{32}%+%c%p2%{32}%+%c, cuu1=\E;, + dch1=\E\021$<16*>, dim=\EE, dl1=\E\002$<3*>, + ed=\E\005$<16*>, el=\E\025$<16>, flash=\Ek$<200>\EK, + ht=\011$<8>, il1=\E\022$<3*>, ind=^J, invis=\EH, ip=$<16*>, + is1=\EK, + is2=\EU\Ef\E7\E5\E8\El\ENH\E\0\Eo&\0\Eo'\E\Eo!\0\E\007!\E\010A@ \E4#\:"\E\:a\E4#;"\E\:b\E4#<"\E\:c, + is3=\Ev $<6>\Ep\n, kbs=^H, kcbt=\E', kctab=\E_, + kcub1=\E>, kcud1=\E<, kcuf1=\E=, kcuu1=\E;, kdch1=\E^Q, + kdl1=\E^B, ked=\E^C, kel=\E^S, kf1=\E5, kf2=\E6, kf3=\E7, + kf4=\E8, kf5=\E9, kf6=\E\:a, kf7=\E\:b, kf8=\E\:c, khome=\E?, + khts=\E], kich1=\E^P, kil1=\E^R, kind=\E[, knp=\E-, kpp=\E., + kri=\E\\, krmir=\E\0, mc4=\036o \E\EQ!\EYP\027, + mc5=\EQ"\EY(\027\EYD\Eo \036, prot=\EI, + rep=\Er%p1%c%p2%{32}%+%c$<.2*>, rev=\ED, + rmcup=\Ev $<6>\Ep\r\n, rmir=\E\s\s, rmkx=\Ex, + rmso=\Ed, rmul=\Eg, sgr0=\EN@, + smcup=\EU\Ev 8p\Ep\r\E\025$<16>, smir=\E^P, smkx=\EX, + smso=\ED, smul=\EG, +c100-rv|c100-rv-4p|concept100-rv|c100 rev video, + cnorm@, cvvis@, flash=\EK$<200>\Ek, is1=\Ek, rmso=\Ee, + smso=\EE, + use=c100, +oc100|oconcept|c100-1p|old 1 page concept 100, + in, + is3@, use=c100, + +# From: Walter Skorski <walt@genetics1.JMP.TJU.EDU>, 16-oct-1996. +# Lots of notes, originally inline, but ncurses doesn't grok that. +# +# am: not available in power on mode, but turned on with \E[=107;207h in +# is2=. Also, \E=124l in is2= could have been used to prevent needing +# to specify xenl:, but that would have rendered the last space on the +# last line useless. +# bw: Not available in power on mode, but turned on with \E[=107;207h in +# is2=. +# clear: Could be done with \E[2J alone, except that vi (and probably most +# other programs) assume that this also homes the cursor. +# dsl: Go to window 2, go to the beginning of the line, use a line feed to +# scroll the window, and go back to window 1. +# is2: the string may cause a warning to be issued by tic that it +# found a very long line and that it suspects that a comma is missing +# somewhere. This warning can be ignored (unless it comes up more than +# once). The initialization string contains the following commands: +# +# [Setup mode items changed from factory defaults:] +# \E)0 set alternate character set to +# graphics +# ^O set character set to default +# [In case it wasn't] +# \E[m turn off all attributes +# [In case they weren't off] +# \E[=107; cursor wrap and +# 207h character wrap on +# \E[90;3u set Fkey definitions to "transmit" +# defaults +# \E[92;3u set cursor key definitions to +# "transmit" defaults +# \E[43;1u set shift F13 to transmit... +# \177\E$P\177 +# \E[44;1u set shift F14 to transmit... +# \177\E$Q\177 +# \E[45;1u set shift F15 to transmit... +# \177\E$R\177 +# \E[46;1u set shift F16 to transmit... +# \177\E$S\177 +# \E[200;1u set shift up to transmit... +# \177\E$A\177 +# \E[201;1u set shift down to transmit... +# \177\E$B\177 +# \E[202;1u set shift right to transmit... +# \177\E$C\177 +# \E[203;1u set shift left to transmit... +# \177\E$D\177 +# \E[204;1u set shift home to transmit... +# \177\E$H\177 +# \E[212;1u set backtab to transmit... +# \177\E$I\177 +# \E[213;1u set shift backspace to transmit... +# \177\E$^H\177 +# \E[214;1u set shift del to transmit... +# "\E$\177" +# [Necessary items not mentioned in setup mode:] +# \E[2!w move to window 2 +# \E[25;25w define window as line 25 of memory +# \E[!w move to window 1 +# \E[2*w show current line of window 2 as +# status line +# \E[2+x set meta key to use high bit +# \E[;3+} move underline to bottom of character +# +# All Fkeys are set to their default transmit definitions with \E[90;3u +# in is2=. IMPORTANT: to use this terminal definition, the "quit" stty +# setting MUST be redefined or deactivated, because the default is +# contained in almost all of this terminal's Fkey strings! If for some +# reason "quit" cannot be altered, the Fkeys can, but it would be +# necessary to change ^| to ^] in all of these definitions, and add +# \E[2;029!t to is2. +# lines: is set to 24 because this terminal refuses to treat the 25th +# line normally. +# ll: Not available in power on mode, but turned on with \E[=107;207h in +# is2=. +# lm: Pointless, given that this definition locks a single screen of +# memory into view, but what the hey... +# rmso: Could use \E[1;7!{ to turn off only bold and reverse (leaving any +# other attributes alone), but some programs expect this to turn off +# everything. +# rmul: Could use \E[4!{ to turn off only underline (leaving any other +# attributes alone), but some programs expect this to turn off +# everything. +# sgr: Attributes are set on this terminal with the string \E[ followed by +# a list of attribute code numbers (in decimal, separated by +# semicolons), followed by the character m. The attribute code +# numbers are: +# 1 for bold; +# 2 for dim (which is ignored in power on mode); +# 4 for underline; +# 5 for blinking; +# 7 for inverse; +# 8 for not displayable; and +# =99 for protected (except that there are strange side +# effects to protected characters which make them inadvisable). +# The mapping of terminfo parameters to attributes is as follows: +# %p1 (standout) = bold and inverse together; +# %p2 (underline) = underline; +# %p3 (reverse) = inverse; +# %p4 (blink) = blinking; +# %p5 (dim) is ignored; +# %p6 (bold) = bold; +# %p7 (invisible) = not displayable; +# %p8 (protected) is ignored; and +# %p9 (alt char set) = alt char set. +# The code to do this is: +# \E[0 OUTPUT \E[0 +# %?%p1%p6%O IF (standout; bold) OR +# %t;1 THEN OUTPUT ;1 +# %; ENDIF +# %?%p2 IF underline +# %t;4 THEN OUTPUT ;4 +# %; ENDIF +# %?%p4 IF blink +# %t;5 THEN OUTPUT ;5 +# %; ENDIF +# %?%p1%p3%O IF (standout; reverse) OR +# %t;7 THEN OUTPUT ;7 +# %; ENDIF +# %?%p7 IF invisible +# %t;8 THEN OUTPUT ;8 +# %; ENDIF +# m OUTPUT m +# %?%p9 IF altcharset +# %t^N THEN OUTPUT ^N +# %e^O ELSE OUTPUT ^O +# %; ENDIF +# sgr0: Everything is turned off (including alternate character set), since +# there is no way of knowing what it is that the program wants turned +# off. +# smul: The "underline" attribute is reconfigurable to an overline or +# strikethru, or (as done with \E[;3+} in is2=), to a line at the true +# bottom of the character cell. This was done to allow for more readable +# underlined characters, and to be able to distinguish between an +# underlined space, an underscore, and an underlined underscore. +# xenl: Terminal can be configured to not need this, but this "glitch" +# behavior is actually preferable with autowrap terminals. +# +# Parameters kf31= thru kf53= actually contain the strings sent by the shifted +# Fkeys. There are no parameters for shifted Fkeys in terminfo. The is2 +# string modifies the 'O' in kf43 to kf46 to a '$'. +# +# kcbt was originally ^I but redefined in is2=. +# kHOM was \E[H originally but redefined in is2=, as were a number of +# other keys. +# kDC was originally \177 but redefined in is2=. +# +# kbs: Shift was also ^H originally but redefined as \E$^H in is2=. +# tsl: Go to window 2, then do an hpa=. +# +#------- flash=\E[8;3!}^G\E[3;3!} +#------- flash=\E[?5h$<100>\E[?5l +# There are two ways to flash the screen, both of which have their drawbacks. +# The first is to set the bell mode to video, transmit a bell character, and +# set the bell mode back - but to what? There is no way of knowing what the +# user's old bell setting was before we messed with it. Worse, the command to +# set the bell mode also sets the key click volume, and there is no way to say +# "leave that alone", or to know what it's set to, either. +# The second way to do a flash is to set the screen to inverse video, pad for a +# tenth of a second, and set it back - but like before, there's no way to know +# that the screen wasn't ALREADY in inverse video, or that the user may prefer +# it that way. The point is moot anyway, since vi (and probably other +# programs) assume that by defining flash=, you want the computer to use it +# INSTEAD of bel=, rather than as a secondary type of signal. +# +#------- cvvis=\E[+{ +# The is the power on setting, which is also as visible as the cursor +# gets. +#------- wind=\E[%i%p1%d;%p2%d;%p3%{1}%+%d;%p4%{1}%+%dw +# Windowing is possible, but not defined here because it is also used to +# emulate status line functions. Allowing a program to set a window could +# clobber the status line or render it unusable. There is additional memory, +# but screen scroll functions are destructive and do not make use of it. +# +#------- dim= Not available in power on mode. +# You have a choice of defining low intensity characters as "half bright" and +# high intensity as "normal", or defining low as "normal" and high as "bold". +# No matter which you choose, only one of either "half bright" or "bold" is +# available at any time, so taking the time to override the default is +# pointless. +# +#------- prot=\E[=0;99m +# Not defined, because it appears to have some strange side effects. +#------- pfkey=%?%p1%{24}%<%p1%{30}%>%p1%{54}%<%A%O%t\E[%p1%du\177%p2%s\177%; +#------- pfloc=%?%p1%{24}%<%p1%{30}%>%p1%{54}%<%A%O%t\E[%p1%du\177%p2%s\177%; +#------- pfx=%?%p1%{24}%<%p1%{30}%>%p1%{54}%<%A%O%t\E[%p1%d;1u\177%p2%s\177%; +# Available, but making them available to programs is inadvisable. +# The code to do this is: +# %?%p1%{24}%< IF ((key; 24) <; +# %p1%{30}%> ((key; 30) >; +# %p1%{54}%< (key; 54) < +# %A ) AND +# %O ) OR +# [that is, "IF key < 24 OR (key > 30 AND key < 54)",] +# %t\E[ THEN OUTPUT \E[ +# %p1%d OUTPUT (key) as decimal +# [next line applies to pfx only] +# ;1 OUTPUT ;1 +# u OUTPUT u +# \177 OUTPUT \177 +# %p2%s OUTPUT (string) as string +# \177 OUTPUT \177 +# [DEL chosen as delimiter, but could be any character] +# [implied: ELSE do nothing] +# %; ENDIF +# +#------- rs2= +# Not defined since anything it might do could be done faster and easier with +# either Meta-Shift-Reset or the main power switch. +# +#------- smkx=\E[1!z +#------- rmkx=\E[!z +# These sequences apply to the cursor and setup keys only, not to the +# numeric keypad. But it doesn't matter anyway, since making these +# available to programs is inadvisable. +# For the key definitions below, all sequences beginning with \E$ are +# custom and programmed into the terminal via is2. \E$ also has no +# meaning to any other terminal. +# +#------- cmdch=\E[;%p1%d!t +# Available, but making it available to programs is inadvisable. +#------- smxon=\E[1*q +# Available, but making it available to programs is inadvisable. +# Terminal will send XON/XOFF on buffer overflow. +#------- rmxon=\E[*q +# Available, but making it available to programs is inadvisable. +# Terminal will not notify on buffer overflow. +#------- smm=\E[2+x +#------- rmm=\E[+x +# Available, but making them available to programs is inadvisable. +# +# Printing: +# It's not made clear in the manuals, but based on other ansi/vt type +# terminals, it's a good guess that this terminal is capable of both +# "transparent print" (which doesn't copy data to the screen, and +# therefore needs mc5i: specified to say so) and "auxilliary print" +# (which does duplicate printed data on the screen, in which case mc4= +# and mc5= should use the \E[?4i and \E[?5i strings instead). + +hds200|Human Designed Systems HDS200, + am, bw, eslok, hs, km, mc5i, mir, msgr, xenl, xon, + cols#80, it#8, lines#24, lm#0, + acsc=``aaffggjjkkllmmnnooqqssttuuvvwwxx~~, bel=^G, + blink=\E[0;5m, bold=\E[0;1m, cbt=\E[Z, civis=\E[6+{, + clear=\E[H\E[J, cnorm=\E[+{, cr=^M, + csr=\E[%i%p1%d;%p2%dr, cub=\E[%p1%dD, cub1=\E[D, + cud=\E[%p1%dB, cud1=\E[B, cuf=\E[%p1%dC, cuf1=\E[C, + cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA, cuu1=\E[A, + dch=\E[%p1%dP, dch1=\E[P, dl=\E[%p1%dM, dl1=\E[M, + dsl=\E[2!w\r\n\E[!w, ed=\E[J, el=\E[K, el1=\E[1K, + fsl=\E[!w, home=\E[H, hpa=\E[%i%p1%dG, ht=^I, hts=\EH, + ich=\E[%p1%d@, il=\E[%p1%dL, il1=\E[L, ind=\ED, + invis=\E[0;8m, + is2=\E)0\017\E[m\E[=107;207h\E[90;3u\E[92;3u\E[43;1u\177\E$P\177\E[44;1u\177\E$Q\177\E[45;1u\177\E$R\177\E[46;1u\177\E$S\177\E[200;1u\177\E$A\177\E[201;1u\177\E$B\177\E[202;1u\177\E$C\177\E[203;1u\177\E$D\177\E[204;1u\177\E$H\177\E[212;1u\177\E$I\177\E[213;1u\177\E$\010\177\E[214;1u"\E$\177"\E[2!w\E[25;25w\E[!w\E[2*w\E[2+x\E[;3+}, + kDC=\E$\177, kHOM=\E$H, kLFT=\E$D, kRIT=\E$C, kbs=^H, + kcbt=\E$I, kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A, + kdch1=\177, kent=^M, kf1=^\001\r, kf10=^\010\r, + kf11=^\011\r, kf12=^\012\r, kf13=\EOP, kf14=\EOQ, + kf15=\EOR, kf16=\EOS, kf17=^\017\r, kf18=^\018\r, + kf19=^\019\r, kf2=^\002\r, kf20=^\020\r, kf21=^\021\r, + kf22=^\022\r, kf23=^\023\r, kf3=^\003\r, kf31=^\031\r, + kf32=^\032\r, kf33=^\033\r, kf34=^\034\r, kf35=^\035\r, + kf36=^\036\r, kf37=^\037\r, kf38=^\038\r, kf39=^\039\r, + kf4=^\004\r, kf40=^\040\r, kf41=^\041\r, kf42=^\042\r, + kf43=\E$P, kf44=\E$Q, kf45=\E$R, kf46=\E$S, kf47=^\047\r, + kf48=^\048\r, kf49=^\049\r, kf5=^\005\r, kf50=^\050\r, + kf51=^\051\r, kf52=^\052\r, kf53=^\053\r, kf6=^\006\r, + kf7=^\007\r, kf8=^\008\r, kf9=^\009\r, khome=\E[H, + kind=\E[T, knp=\E[U, kpp=\E[V, kri=\E[S, ll=\E[H\E[A, + mc0=\E[i, mc4=\E[4i, mc5=\E[5i, nel=\E[E, rc=\E8, + rev=\E[0;7m, ri=\EM, rmacs=^O, rmir=\E[4l, rmso=\E[m\017, + rmul=\E[m\017, sc=\E7, + sgr=\E[0%?%p1%p6%O%t;1%;%?%p2%t;4%;%?%p4%t;5%;%?%p1%p3%O%t;7%;%?%p7%t;8%;m%?%p9%t\016%e\017%;, + sgr0=\E[m\017, smacs=^N, smir=\E[4h, smso=\E[0;1;7m, + smul=\E[0;4m, tbc=\E[3g, tsl=\E[2!w\E[%i%p1%dG, + vpa=\E[%i%p1%dd, + +# <ht> through <el> included to specify padding needed in raw mode. +# (avt-ns: added empty <acsc> to suppress a tic warning --esr) +avt-ns|concept avt no status line, + am, eo, mir, ul, xenl, xon, + cols#80, it#8, lines#24, lm#192, + acsc=, bel=^G, blink=\E[5m, bold=\E[1m, cbt=\E[Z, + clear=\E[H\E[J$<38>, cnorm=\E[=119l, cr=^M, + csr=\E[%i%p1%d;%p2%dr, cub=\E[%p1%dD, cub1=^H, + cud=\E[%p1%dB, cud1=^J, cuf=\E[%p1%dC, cuf1=\E[C, + cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA, cuu1=\E[A, + cvvis=\E[=119h, dch1=\E[P, dim=\E[1!{, dl=\E[%p1%dM$<4*>, + dl1=\E[M$<4>, ed=\E[J$<96>, el=\E[K$<6>, home=\E[H, + hpa=\E[%p1%{1}%+%dG, ht=\011$<4>, hts=\EH, ich=\E[%p1%d@, + ich1=\E[@, il=\E[%p1%dL$<4*>, il1=\E[L$<4>, ind=\n$<8>, + invis=\E8m, ip=$<4>, is1=\E[=103l\E[=205l, + is2=\E[1*q\E[2!t\E[7!t\E[=4;101;119;122l\E[=107;118;207h\E)1\E[1Q\EW\E[!y\E[!z\E>\E[0\:0\:32!r\E[0*w\E[w\E2\r\n\E[2;27!t, + kbs=^H, kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A, + kdch1=\E^B\r, ked=\E^D\r, kf1=\EOP, kf2=\EOQ, kf3=\EOR, + kf4=\EOS, khome=\E[H, kich1=\E^A\r, kil1=\E^C\r, ll=\E[24H, + mc0=\E[0i, mc4=\E[4i, mc5=\E[5i, + pfloc=\E[%p1%d;0u#%p2%s#, pfx=\E[%p1%d;1u#%p2%s#, + prot=\E[99m, rc=\E8, rep=%p1%c\E[%p2%{1}%-%db, rev=\E[7m, + ri=\EM$<4>, rmacs=\016$<1>, rmcup=\E[w\E2\r\n, rmir=\E4l, + rmkx=\E[!z\E[0;2u, rmso=\E[7!{, rmul=\E[4!{, sc=\E7, + sgr=\E[%?%p1%t7;%;%?%p2%t4;%;%?%p3%t7;%;%?%p4%t5;%;%?%p6%t1;%;m, + sgr0=\E[m, smacs=\017$<1>, smcup=\E[=4l\E[1;24w\E2\r, + smir=\E1, smkx=\E[1!z\E[0;3u, smso=\E[7m, smul=\E[4m, + tbc=\E[2g, vpa=\E[%p1%{1}%+%dd, +avt-rv-ns|concept avt in reverse video mode/no status line, + flash=\E[=205l$<200>\E[=205h, is1=\E[=103l\E[=205h, + use=avt-ns, +avt-w-ns|concept avt in 132 column mode/no status line, + is1=\E[=103h\E[=205l, smcup=\E[H\E[1;24;1;132w, + use=avt-ns, +avt-w-rv-ns|concept avt in 132 column mode/no status line/reverse video, + flash=\E[=205l$<200>\E[=205h, is1=\E[=103h\E[=205h, + smcup=\E[H\E[1;24;1;132w, + use=avt-ns, + +# Concept AVT with status line. We get the status line using the +# "Background status line" feature of the terminal. We swipe the +# first line of memory in window 2 for the status line, keeping +# 191 lines of memory and 24 screen lines for regular use. +# The first line is used instead of the last so that this works +# on both 4 and 8 page AVTs. (Note the lm#191 or 192 - this +# assumes an 8 page AVT but lm isn't currently used anywhere.) +# +avt+s|concept avt status line changes, + eslok, hs, + lm#191, + dsl=\E[0*w, fsl=\E[1;1!w, + is3=\E[2w\E[2!w\E[1;1;1;80w\E[H\E[2*w\E[1!w\E2\r\n, + rmcup=\E[2w\E2\r\n, smcup=\E[2;25w\E2\r, + tsl=\E[2;1!w\E[;%p1%dH\E[2K, +avt|avt-s|concept-avt|avt w/80 columns, + use=avt+s, use=avt-ns, +avt-rv|avt-rv-s|avt reverse video w/sl, + flash=\E[=205l$<200>\E[=205h, is1=\E[=103l\E[=205h, use=avt+s, + use=avt-ns, +avt-w|avt-w-s|concept avt 132 cols+status, + is1=\E[=103h\E[=205l, smcup=\E[H\E[1;24;1;132w, use=avt+s, + use=avt-ns, +avt-w-rv|avt-w-rv-s|avt wide+status+rv, + flash=\E[=205l$<200>\E[=205h, is1=\E[=103h\E[=205h, + smcup=\E[H\E[1;24;1;132w, + use=avt+s, use=avt-ns, + +#### Contel Business Systems. +# + +# Contel c300 and c320 terminals. +contel300|contel320|c300|Contel Business Systems C-300 or C-320, + am, in, xon, + cols#80, lines#24, xmc#1, + bel=^G, clear=\EK, cr=^M, cub1=^H, cud1=^J, cuf1=\EC, + cup=\EX%p1%{32}%+%c\EY%p2%{32}%+%c, cuu1=\EA, + dch1=\EO$<5.5*>, dl1=\EM$<5.5*>, ed=\EJ$<5.5*>, + el=\EI$<5.5>, flash=\020\002$<200/>\020\003, home=\EH, + hts=\E1, ich1=\EN, il1=\EL$<5.5*>, ind=^J, ip=$<5.5*>, + kbs=^H, kf0=\ERJ, kf1=\ERA, kf2=\ERB, kf3=\ERC, kf4=\ERD, + kf5=\ERE, kf6=\ERF, kf7=\ERG, kf8=\ERH, kf9=\ERI, ll=\EH\EA, + rmso=\E!\0, sgr0=\E!\0, smso=\E!\r, tbc=\E3, +# Contel c301 and c321 terminals. +contel301|contel321|c301|c321|Contel Business Systems C-301 or C-321, + flash@, ich1@, ip@, rmso=\E!\0$<20>, smso=\E!\r$<20>, + use=contel300, + +#### Data General (dg) +# +# According to James Carlson <carlson@xylogics.com> writing in January 1995, +# the terminals group at Data General was shut down in 1991; all these +# terminals have thus been discontinued. +# +# DG terminals have function keys that respond to the SHIFT and CTRL keys, +# e.g., SHIFT-F1 generates a different code from F1. To number the keys +# sequentially, first the unmodified key codes are listed as F1 through F15. +# Then their SHIFT versions are listed as F16 through F30, their CTRL versions +# are listed as F31 through F45, and their CTRL-SHIFT versions are listed as +# F46 through F60. This is done in the private "includes" below whose names +# start with "dgkeys+". +# +# DG terminals generally support 8 bit characters. For each of these terminals +# two descriptions are supplied: +# 1) A default description for 8 bits/character communications, which +# uses the default DG international character set and keyboard codes. +# 2) A description with suffix "-7b" for 7 bits/character communications. +# This description must use the NON-DEFAULT native keyboard language. + +# Unmodified fkeys (kf1-kf11), Shift fkeys (kf12-kf22), Ctrl fkeys (kf23-kf33), +# Ctrl/Shift fdkeys (kf34-kf44). + +dgkeys+8b|Private entry describing DG terminal 8-bit ANSI mode special keys, + ka1=\233020z, ka3=\233021z, kc1=\233022z, kc3=\233023z, + kclr=\2332J, kcub1=\233D, kcud1=\233B, kcuf1=\233C, + kcuu1=\233A, kel=\233K, kf1=\233001z, kf10=\233010z, + kf11=\233011z, kf12=\233012z, kf13=\233013z, + kf14=\233014z, kf15=\233000z, kf16=\233101z, + kf17=\233102z, kf18=\233103z, kf19=\233104z, + kf2=\233002z, kf20=\233105z, kf21=\233106z, + kf22=\233107z, kf23=\233108z, kf24=\233109z, + kf25=\233110z, kf26=\233111z, kf27=\233112z, + kf28=\233113z, kf29=\233114z, kf3=\233003z, + kf30=\233100z, kf31=\233201z, kf32=\233202z, + kf33=\233203z, kf34=\233204z, kf35=\233205z, + kf36=\233206z, kf37=\233207z, kf38=\233208z, + kf39=\233209z, kf4=\233004z, kf40=\233210z, + kf41=\233211z, kf42=\233212z, kf43=\233213z, + kf44=\233214z, kf45=\233200z, kf46=\233301z, + kf47=\233302z, kf48=\233303z, kf49=\233304z, + kf5=\233005z, kf50=\233305z, kf51=\233306z, + kf52=\233307z, kf53=\233308z, kf54=\233309z, + kf55=\233310z, kf56=\233311z, kf57=\233312z, + kf58=\233313z, kf59=\233314z, kf6=\233006z, + kf60=\233300z, kf7=\233007z, kf8=\233008z, kf9=\233009z, + khome=\233H, kprt=\233i, + +dgkeys+7b|Private entry describing DG terminal 7-bit ANSI mode special keys, + ka1=\E[020z, ka3=\E[021z, kc1=\E[022z, kc3=\E[023z, + kclr=\E[2J, kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A, + kel=\E[K, kf1=\E[001z, kf10=\E[010z, kf11=\E[011z, + kf12=\E[012z, kf13=\E[013z, kf14=\E[014z, kf15=\E[000z, + kf16=\E[101z, kf17=\E[102z, kf18=\E[103z, kf19=\E[104z, + kf2=\E[002z, kf20=\E[105z, kf21=\E[106z, kf22=\E[107z, + kf23=\E[108z, kf24=\E[109z, kf25=\E[110z, kf26=\E[111z, + kf27=\E[112z, kf28=\E[113z, kf29=\E[114z, kf3=\E[003z, + kf30=\E[100z, kf31=\E[201z, kf32=\E[202z, kf33=\E[203z, + kf34=\E[204z, kf35=\E[205z, kf36=\E[206z, kf37=\E[207z, + kf38=\E[208z, kf39=\E[209z, kf4=\E[004z, kf40=\E[210z, + kf41=\E[211z, kf42=\E[212z, kf43=\E[213z, kf44=\E[214z, + kf45=\E[200z, kf46=\E[301z, kf47=\E[302z, kf48=\E[303z, + kf49=\E[304z, kf5=\E[005z, kf50=\E[305z, kf51=\E[306z, + kf52=\E[307z, kf53=\E[308z, kf54=\E[309z, kf55=\E[310z, + kf56=\E[311z, kf57=\E[312z, kf58=\E[313z, kf59=\E[314z, + kf6=\E[006z, kf60=\E[300z, kf7=\E[007z, kf8=\E[008z, + kf9=\E[009z, khome=\E[H, kprt=\E[i, + +dgkeys+11|Private entry describing 11 minimal-subset DG mode special keys, + kclr=^L, kcub1=^Y, kcud1=^Z, kcuf1=^X, kcuu1=^W, kel=^K, + kf1=^^q, kf10=^^z, kf11=^^{, kf12=^^a, kf13=^^b, kf14=^^c, + kf15=^^d, kf16=^^e, kf17=^^f, kf18=^^g, kf19=^^h, kf2=^^r, + kf20=^^i, kf21=^^j, kf22=^^k, kf23=^^1, kf24=^^2, kf25=^^3, + kf26=^^4, kf27=^^5, kf28=^^6, kf29=^^7, kf3=^^s, kf30=^^8, + kf31=^^9, kf32=^^\:, kf33=^^;, kf34=^^!, kf35=^^", kf36=^^#, + kf37=^^$, kf38=^^%, kf39=^^&, kf4=^^t, kf40=^^', kf41=^^(, + kf42=^^), kf43=^^*, kf44=^^+, kf5=^^u, kf6=^^v, kf7=^^w, + kf8=^^x, kf9=^^y, khome=^H, + +dgkeys+15|Private entry describing 15 DG mode special keys, + kHOM=^^^H, kLFT=^^^Y, kRIT=^^^X, ka1=^^\\, ka3=^^], kc1=^^\^, + kc3=^^_, kf1=^^q, kf10=^^z, kf11=^^{, kf12=^^|, kf13=^^}, + kf14=^^~, kf15=^^p, kf16=^^a, kf17=^^b, kf18=^^c, kf19=^^d, + kf2=^^r, kf20=^^e, kf21=^^f, kf22=^^g, kf23=^^h, kf24=^^i, + kf25=^^j, kf26=^^k, kf27=^^l, kf28=^^m, kf29=^^n, kf3=^^s, + kf30=^^`, kf31=^^1, kf32=^^2, kf33=^^3, kf34=^^4, kf35=^^5, + kf36=^^6, kf37=^^7, kf38=^^8, kf39=^^9, kf4=^^t, kf40=^^\:, + kf41=^^;, kf42=^^<, kf43=^^=, kf44=^^>, kf45=^^0, kf46=^^!, + kf47=^^", kf48=^^#, kf49=^^$, kf5=^^u, kf50=^^%, kf51=^^&, + kf52=^^', kf53=^^(, kf54=^^), kf55=^^*, kf56=^^+, kf57=^^\,, + kf58=^^-, kf59=^^., kf6=^^v, kf60=^^\s, kf7=^^w, kf8=^^x, + kf9=^^y, + +# Data General color terminals use the "Tektronix" color model. The total +# number of colors varies with the terminal model, as does support for +# attributes used in conjunction with color. + +# Removed u7, u8 definitions since they conflict with tack: +# Preserve user-defined colors in at least some cases. +# u7=^^Fh, +# Default is ACM mode. +# u8=^^F}20^^Fi^^F}21, +# +dgunix+fixed|Fixed color info for DG D430C terminals in DG-UNIX mode, + bce, + colors#16, ncv#53, pairs#256, + op=\036Ad\036Bd, + setab=\036B%p1%?%p1%{8}%<%t%{2}%&%?%p1%{1}%&%t%{4}%|%;%?%p1%{4}%&%t%{1}%|%;%;%{48}%+%c, + setaf=\036A%p1%?%p1%{8}%<%t%{2}%&%?%p1%{1}%&%t%{4}%|%;%?%p1%{4}%&%t%{1}%|%;%;%{48}%+%c, + setb=\036B%p1%{48}%+%c, setf=\036A%p1%{48}%+%c, + +dg+fixed|Fixed color info for DG D430C terminals in DG mode, + use=dgunix+fixed, + +# Video attributes are coordinated using static variables set by "sgr", then +# checked by "op", "seta[bf]", and "set[bf]" to refresh the attribute settings. +# (D=dim, U=underline, B=blink, R=reverse.) +dg+color8|Color info for Data General D220 and D230C terminals in ANSI mode, + bce, + colors#8, ncv#16, pairs#64, + op=\E[%?%gD%t2;%;%?%gU%t4;%;%?%gB%t5;%;%?%gR%t7;%;m, + setab=\E[4%p1%d%?%gD%t;2%;%?%gU%t;4%;%?%gB%t;5%;%?%gR%t;7%;m, + setaf=\E[3%p1%d%?%gD%t;2%;%?%gU%t;4%;%?%gB%t;5%;%?%gR%t;7%;m, + setb=\E[4%p1%{2}%&%?%p1%{1}%&%t%{4}%|%;%?%p1%{4}%&%t%{1}%|%;%d%?%gD%t;2%;%?%gU%t;4%;%?%gB%t;5%;%?%gR%t;7%;m, + setf=\E[3%p1%{2}%&%?%p1%{1}%&%t%{4}%|%;%?%p1%{4}%&%t%{1}%|%;%d%?%gD%t;2%;%?%gU%t;4%;%?%gB%t;5%;%?%gR%t;7%;m, + +dg+color|Color info for Data General D470C terminals in ANSI mode, + colors#16, ncv#53, pairs#256, + setab=\E[%?%p1%{8}%<%t4%p1%e=%p1%{2}%&%?%p1%{1}%&%t%{4}%|%;%?%p1%{4}%&%t%{1}%|%;%;%d%?%gD%t;2%;%?%gU%t;4%;%?%gB%t;5%;%?%gR%t;7%;m, + setaf=\E[%?%p1%{8}%<%t3%p1%e<%p1%{2}%&%?%p1%{1}%&%t%{4}%|%;%?%p1%{4}%&%t%{1}%|%;%;%d%?%gD%t;2%;%?%gU%t;4%;%?%gB%t;5%;%?%gR%t;7%;m, + setb=\E[%?%p1%{8}%<%t4%e=%;%p1%{2}%&%?%p1%{1}%&%t%{4}%|%;%?%p1%{4}%&%t%{1}%|%;%d%?%gD%t;2%;%?%gU%t;4%;%?%gB%t;5%;%?%gR%t;7%;m, + setf=\E[%?%p1%{8}%<%t3%e<%;%p1%{2}%&%?%p1%{1}%&%t%{4}%|%;%?%p1%{4}%&%t%{1}%|%;%d%?%gD%t;2%;%?%gU%t;4%;%?%gB%t;5%;%?%gR%t;7%;m, + use=dg+color8, + +dgmode+color8|Color info for Data General D220/D230C terminals in DG mode, + bce, + colors#8, ncv#16, pairs#64, + op=\036Ad\036Bd, + setab=\036B%p1%{2}%&%?%p1%{1}%&%t%{4}%|%;%?%p1%{4}%&%t%{1}%|%;%{48}%+%c, + setaf=\036A%p1%{2}%&%?%p1%{1}%&%t%{4}%|%;%?%p1%{4}%&%t%{1}%|%;%{48}%+%c, + setb=\036B%p1%{48}%+%c, setf=\036A%p1%{48}%+%c, + +dgmode+color|Color info for Data General D470C terminals in DG mode, + colors#16, pairs#256, + setab=\036B%p1%?%p1%{8}%<%t%{2}%&%?%p1%{1}%&%t%{4}%|%;%?%p1%{4}%&%t%{1}%|%;%;%{48}%+%c, + setaf=\036A%p1%?%p1%{8}%<%t%{2}%&%?%p1%{1}%&%t%{4}%|%;%?%p1%{4}%&%t%{1}%|%;%;%{48}%+%c, + use=dgmode+color8, + +dgunix+ccc|Configurable color info for DG D430C terminals in DG-UNIX mode, + bce, ccc, + colors#52, ncv#53, pairs#26, + initp=\036RG0%p1%02X%p2%{256}%*%{1001}%/%02X%p3%{256}%*%{1001}%/%02X%p4%{256}%*%{1001}%/%02X%p5%{256}%*%{1001}%/%02X%p6%{256}%*%{1001}%/%02X%p7%{256}%*%{1001}%/%02X, + oc=\036RG01A00FF00000000\036RG01B00000000FF00\036RG01C007F00000000\036RG01D000000007F00, + op=\036RF4831A\036RF2E31B\036RF1D31C\036RF3F31D, + scp=\036RG2%p1%02X, + +# Colors are in the order: normal, reverse, dim, dim + reverse. +dg+ccc|Configurable color info for DG D430C terminals in DG mode, + bce, ccc, + colors#52, ncv#53, pairs#26, + initp=\036RG0%p1%{16}%/%{48}%+%c%p1%{16}%m%{48}%+%c%p2%{256}%*%{1001}%/%Pa%ga%{16}%/%{48}%+%c%ga%{16}%m%{48}%+%c%p3%{256}%*%{1001}%/%Pa%ga%{16}%/%{48}%+%c%ga%{16}%m%{48}%+%c%p4%{256}%*%{1001}%/%Pa%ga%{16}%/%{48}%+%c%ga%{16}%m%{48}%+%c%p5%{256}%*%{1001}%/%Pa%ga%{16}%/%{48}%+%c%ga%{16}%m%{48}%+%c%p6%{256}%*%{1001}%/%Pa%ga%{16}%/%{48}%+%c%ga%{16}%m%{48}%+%c%p7%{256}%*%{1001}%/%Pa%ga%{16}%/%{48}%+%c%ga%{16}%m%{48}%+%c, + oc=\036RG01\:00??00000000\036RG01;00000000??00\036RG01<007?00000000\036RG01=000000007?00, + op=\036RF4831\:\036RF2>31;\036RF1=31<\036RF3?31=, + scp=\036RG2%p1%{16}%/%{48}%+%c%p1%{16}%m%{48}%+%c, + +# The generic DG terminal type (an 8-bit-clean subset of the 6053) +# Initialization string 1 sets: +# ^R - vertical scrolling enabled +# ^C - blinking enabled +dg-generic|Generic Data General terminal in DG mode, + am, bw, msgr, xon, + cols#80, lines#24, + bel=^G, blink=^N, clear=^L, cr=^M, cub1=^Y, cud1=^Z, cuf1=^X, + cup=\020%p2%c%p1%c, cuu1=^W, dim=^\, el=^K, ind=^J, is1=^R^C, + mc0=^Q, nel=^J, rmso=^], rmul=^U, sgr0=^O^U^], smso=^\, + smul=^T, + use=dgkeys+11, + +# According to the 4.4BSD termcap file, the dg200 <cup> should be the +# termcap equivalent of \020%p2%{128}%+%c%p1%{128}%+%c (in termcap +# notation that's "^P%r%+\200%+\200"). Those \200s are suspicious, +# maybe they were originally nuls (which would fit). + +dg200|data general dasher 200, + am, bw, + cols#80, lines#24, + bel=^G, clear=^L, cr=^M, cub1=^Y, cud1=^Z, cuf1=^X, + cup=\020%p2%c%p1%c, cuu1=^W, el=^K, home=^H, ind=^J, + kcub1=^Y, kcud1=^Z, kcuf1=^X, kcuu1=^W, kf0=^^z, kf1=^^q, + kf2=^^r, kf3=^^s, kf4=^^t, kf5=^^u, kf6=^^v, kf7=^^w, kf8=^^x, + kf9=^^y, khome=^H, lf0=f10, nel=^J, rmso=^^E, rmul=^U, + smso=^^D, smul=^T, + +# Data General 210/211 (and 410?) from Lee Pearson (umich!lp) via BRL +dg210|dg-ansi|Data General 210/211, + am, + cols#80, lines#24, + clear=\E[2J, cud1=\E[B, cup=\E[%i%p1%d;%p2%dH, cuu1=\E[A, + ed=\E[J, el=\E[K, home=\E[H, kcub1=\E[D, kcud1=\E[B, + kcuf1=\E[C, kcuu1=\E[A, khome=\E[H, nel=\r\E[H\E[A\n, + rmso=\E[0;m, rmul=\E[0;m, smso=\E[7;m, smul=\E[4;m, +# From: Peter N. Wan <ihnp4!gatech!gacsr!wan> +# courtesy of Carlos Rucalde of Vantage Software, Inc. +# (dg211: this had <cup=\020%r%.%>., which was an ancient termcap hangover. +# I suspect the d200 function keys actually work on the dg211, check it out.) +dg211|Data General d211, + cnorm=^L, cvvis=^L^R, ht=^I, ind@, kbs=^Y, kf0@, kf1@, kf2@, kf3@, + kf4@, kf5@, kf6@, kf7@, kf8@, kf9@, lf0@, nel=^M^Z, rmcup=^L, + rmso=\036E$<\0/>, smcup=^L^R, smso=\036D$<5/>, + use=dg200, +# dg450 from cornell +dg450|dg6134|data general 6134, + cub1@, cuf1=^X, use=dg200, +# Note: lesser Dasher terminals will not work with vi because vi insists upon +# having a command to move straight down from any position on the bottom line +# and scroll the screen up, or a direct vertical scroll command. The 460 and +# above have both, the D210/211, for instance, has neither. We must use ANSI +# mode rather than DG mode because standard UNIX tty drivers assume that ^H is +# backspace on all terminals. This is not so in DG mode. +# (dg460-ansi: removed obsolete ":kn#6:"; also removed ":mu=\EW:", on the +# grounds that there is no matching ":ml:" +# fixed garbled ":k9=\E[00\:z:" capability -- esr) +dg460-ansi|Data General Dasher 460 in ANSI-mode, + am, msgr, ul, + cols#80, it#8, lines#24, + blink=\E[5m, clear=\E[2J, cub1=^H, cud1=\E[B, cuf1=\E[C, + cup=\E[%i%p1%2d;%p2%2dH, cuu1=\E[A, dch1=\E[P, dim=\E[2m, + dl1=\E[M, ed=\E[J, el=\E[K, home=\E[H, ht=^I, ich1=\E[@, + il1=\E[L, ind=\E[S, is2=^^F@, kbs=\E[D, kcub1=\E[D, + kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A, kf0=\E[001z, + kf1=\E[002z, kf2=\E[003z, kf3=\E[004z, kf4=\E[005z, + kf5=\E[006z, kf6=\E[007z, kf7=\E[008z, kf8=\E[009z, + kf9=\E[010z, khome=\E[H, lf0=f1, lf1=f2, lf2=f3, lf3=f4, + lf4=f5, lf5=f6, lf6=f7, lf7=f8, lf9=f10, rev=\E[7m, ri=\E[T, + rmso=\E[m, rmul=\E[05, sgr0=\E[m, smso=\E[7m, smul=\E[4m, +# From: Wayne Throop <mcnc!rti-sel!rtp47!throopw> +# Data General 605x +# Ought to work for a Model 6242, Type D210 as well as a 605x. +# Note that the cursor-down key transmits ^Z. Job control users, beware! +# This also matches a posted description of something called a `Dasher 100' +# so there's a dg100 alias here. +# (dg6053: the 4.4BSD file had <cub1=^H>, <cud1=^J>, <cuf1=^S>. -- esr) +dg6053-old|dg100|data general 6053, + am, bw, ul, + cols#80, lines#24, + bel=^G, clear=^L, cnorm=^L, cr=^M, cub1=^Y, cud1=^Z, cuf1=^X, + cup=\020%p2%c%p1%c, cuu1=^W, cvvis=^L^R, el=^K, home=^H, + ht=^I, is2=^R, kbs=^Y, kcub1=^Y, kcud1=^Z, kcuf1=^X, kcuu1=^W, + kf0=^^q, kf1=^^r, kf2=^^s, kf3=^^t, kf4=^^u, kf5=^^v, kf6=^^w, + kf7=^^x, kf8=^^y, kf9=^^z, khome=^H, rmcup=^L, rmso=\0^^E, + rmul=^U, smcup=^L^R, smso=\0\0\0\0\0\036D, smul=^T, + +# (Some performance can be gained over the generic DG terminal type) +dg6053|6053|6053-dg|dg605x|605x|605x-dg|d2|d2-dg|Data General DASHER 6053, + xon@, + home=^P\0\0, ll=^P\0^W, use=dg-generic, + +# Like 6053, but adds reverse video and more keypad and function keys. +d200|d200-dg|Data General DASHER D200, + bold=^^D^T, home@, ll@, rev=^^D, rmso=^^E^], + sgr=\036%?%p1%p3%|%p6%|%tD%eE%;%?%p2%p6%|%t\024%e\025%;%?%p4%t\016%e\017%;%?%p1%p5%|%t\034%e\035%;, + sgr0=\017\025\035\036E, smso=^^D^\, + use=dgkeys+15, use=dg6053, + +# DASHER D210 series terminals in ANSI mode. +# Reverse video, no insert/delete character/line, 7 bits/character only. +# +# Initialization string 1 sets: +# <0 - scrolling enabled +# <1 - blink enabled +# <4 - print characters regardless of attributes +d210|d214|Data General DASHER D210 series, + am, bw, msgr, xon, + cols#80, lines#24, + bel=^G, blink=\E[5m, bold=\E[4;7m, clear=\E[2J, cr=^M, + cub=\E[%p1%dD, cub1=^H, cud=\E[%p1%dB, cud1=\E[B, + cuf=\E[%p1%dC, cuf1=\E[C, cup=\E[%i%p1%d;%p2%dH, + cuu=\E[%p1%dA, cuu1=\E[A, dim=\E[2m, ed=\E[J, el=\E[K, + el1=\E[1K, home=\E[H, ind=^J, is1=\E[<0;<1;<4l, + ll=\E[H\E[A, nel=^J, rev=\E[7m, rmso=\E[m, rmul=\E[m, + sgr=\E[%?%p1%p3%|%p6%|%t7;%;%?%p4%t5;%;%?%p2%p6%|%t4;%;%?%p1%p5%|%t2;%;m, + sgr0=\E[m, smso=\E[2;7m, smul=\E[4m, + use=dgkeys+7b, + +# DASHER D210 series terminals in DG mode. +# Like D200, but adds clear to end-of-screen and needs XON/XOFF. +d210-dg|d214-dg|Data General DASHER D210 series in DG mode, + xon, + ed=^^FF, use=d200-dg, + +# DASHER D211 series terminals in ANSI mode. +# Like the D210, but with 8-bit characters and local printer support. +# +# Initialization string 2 sets: +# \E[2;1;1;1v +# 2;1 - 8 bit operations +# 1;1 - 8 bit (international) keyboard language +# \E(B - default primary character set (U.S. ASCII) +# \E)4 - default secondary character set (international) +# ^O - primary character set +# +d211|d215|Data General DASHER D211 series, + km, + is2=\E[2;1;1;1v\E(B\E)4\017, mc0=\E[i, use=dgkeys+8b, use=d210, + +# Initialization string 2 sets: +# \E[2;0;1;0v +# 2;0 - 7 bit operations +# 1;0 - 7 bit (native) keyboard language +# \E(0 - default character set (the keyboard native language) +# ^O - primary character set +d211-7b|d215-7b|Data General DASHER D211 series in 7 bit mode, + km@, + is2=\E[2;0;1;0v\E(0\017, use=dgkeys+7b, use=d211, + +# Like the D210 series, but adds support for 8-bit characters. +# +# Reset string 2 sets: +# ^^N - secondary character set +# ^^FS0> - 8 bit international character set +# ^^O - primary character set +# ^^FS00 - default character set (matching the native keyboard language) +# +d211-dg|d215-dg|Data General DASHER D211 series in DG mode, + km, + rs2=\036N\036FS0>\036O\036FS00, use=d210-dg, + +d216-dg|d216e-dg|d216+dg|d216e+dg|d217-dg|Data General DASHER D216 series in DG mode, + use=d211-dg, + +# Enhanced DG mode with changes to be more UNIX compatible. +d216-unix|d216e-unix|d216+|d216e+|Data General DASHER D216+ in DG-UNIX mode, + mc5i, + it#8, + acsc=a\177j$k"l!m#n)q+t'u&v(w%x*, blink=^^PI, + clear=^^PH, cub1=^^PD, cud1=^^PB, cuf1=^^PC, cuu1=^^PA, + el=^^PE, home=^^PF, hpa=\020%p1%c\177, ht=^I, ind=^J, + is1=\022\003\036P@1, is3=\036Fz0, kHOM=^^Pf, kLFT=^^Pd, + kPRT=^^P1, kRIT=^^Pc, kclr=^^PH, kcub1=^^PD, kcud1=^^PB, + kcuf1=^^PC, kcuu1=^^PA, kel=^^PE, khome=^^PF, kprt=^^P0, + mc0=\036F?9, mc4=^^Fa, mc5=^^F`, rmacs=\036FS00, + rs2=\036N\036FS0E\036O\036FS00, + sgr=\036%?%p1%p3%|%p6%|%tD%eE%;%?%p2%p6%|%t\024%e\025%;\036P%?%p4%tI%eJ%;%?%p1%p5%|%t\034%e\035%;\036FS%?%p9%t11%e00%;, + sgr0=\036PJ\025\035\036E\036FS00, smacs=\036FS11, + vpa=\020\177%p1%c, + use=dgkeys+15, use=d216-dg, +d216-unix-25|d216+25|Data General DASHER D216+ in DG-UNIX mode with 25 lines, + lines#25, + is3=\036Fz2, use=d216+, + +d217-unix|Data General DASHER D217 in DG-UNIX mode, + use=d216-unix, +d217-unix-25|Data General DASHER D217 in DG-UNIX mode with 25 lines, + use=d216-unix-25, + +# DASHER D220 color terminal in ANSI mode. +# Like the D470C but with fewer colors and screen editing features. +# +# Initialization string 1 sets: +# \E[<0;<1;<4l +# <0 - scrolling enabled +# <1 - blink enabled +# <4 - print characters regardless of attributes +# \E[m - all attributes off +# Reset string 1 sets: +# \Ec - initial mode defaults (RIS) +# +d220|Data General DASHER D220, + mc5i@, + dl@, dl1@, il@, il1@, is1=\E[<0;<1;<4l\E[m, mc4@, mc5@, rs1=\Ec, use=dg+color8, use=d470c, + +d220-7b|Data General DASHER D220 in 7 bit mode, + mc5i@, + dl@, dl1@, il@, il1@, is1=\E[<0;<1;<4l\E[m, mc4@, mc5@, rs1=\Ec, use=dg+color8, use=d470c-7b, + +# Initialization string 3 sets: +# - default cursor (solid rectangle) +# Reset string 2 sets: +# ^^N - secondary character set +# ^^FS0> - 8 bit international character set +# ^^O - primary character set +# ^^FS00 - default character set (matching the native keyboard language) +# +d220-dg|Data General DASHER D220 color terminal in DG mode, + mc5i@, + dl1@, home@, il1@, is2@, is3=\036FQ2, ll@, mc4@, mc5@, rs1@, + rs2=\036N\036FS0>\036O\036FS00, + use=dgmode+color8, use=d470c-dg, + +# DASHER D230C color terminal in ANSI mode. +# Like the D220 but with minor ANSI compatibility improvements. +# +d230c|d230|Data General DASHER D230C, + blink=\E[5;50m, bold=\E[4;7;50m, dim=\E[2;50m, nel=^M^J, + rev=\E[7;50m, rmkx=\E[2;1v, rmso=\E[50m, rmul=\E[50m, + sgr=\E[50%?%p1%p3%|%p6%|%t;7%{1}%e%{0}%;%PR%?%p4%t;5%{1}%e%{0}%;%PB%?%p2%p6%|%t;4%{1}%e%{0}%;%PU%?%p1%p5%|%t;2%{1}%e%{0}%;%PDm\E)%?%p9%t6\016%e4\017%;, + sgr0=\E[50m\E)4\017, smkx=\E[2;0v, smso=\E[2;7;50m, + smul=\E[4;50m, + use=dgkeys+7b, use=d220, + +d230c-dg|d230-dg|Data General DASHER D230C in DG mode, + use=d220-dg, + +# DASHER D400/D450 series terminals. +# These add intelligent features like insert/delete to the D200 series. +# +# Initialization string 2 sets: +# ^^FQ2 - default cursor (solid rectangle) +# ^^FW - character protection disabled +# ^^FJ - normal (80 column) mode +# ^^F\^ - horizontal scrolling enabled (for alignment) +# ^^FX004? - margins at columns 0 and 79 +# ^^F] - horizontal scrolling disabled +# ^^O - primary character set +# ^^FS00 - default character set (the keyboard native language) +# - (should reset scrolling regions, but that glitches the screen) +# Reset string 1 sets: +# ^^FA - all terminal defaults except scroll rate +# Reset string 2 sets: +# ^^F] - horizontal scrolling disabled +# ^^FT0 - jump scrolling +# +d400|d400-dg|d450|d450-dg|Data General DASHER D400/D450 series, + mc5i, + acsc=j$k"l!m#n)q+t'u&v(w%x*, civis=\036FQ0, + cnorm=\036FQ2, dch1=^^K, dl1=^^FI, + enacs=\036N\036FS11\036O, home=^^FG, hpa=\020%p1%c\177, + ich1=^^J, il1=^^FH, + is2=\036FQ2\036FW\036FJ\036F\^\036FX004?\036F]\036O\036FS00, + ll=\036FG\027, mc4=^^Fa, mc5=^^F`, ri=^^I, rmacs=^^O, + rs1=^^FA, rs2=\036F]\036FT0, + sgr=\036%?%p1%p3%|%p6%|%tD%eE%;%?%p2%p6%|%t\024%e\025%;%?%p4%t\016%e\017%;%?%p1%p5%|%t\034%e\035%;\036%?%p9%tN%eO%;, + sgr0=\017\025\035\036E\036O, smacs=^^N, + vpa=\020\177%p1%c, use=d210-dg, + +# DASHER D410/D460 series terminals in ANSI mode. +# These add a large number of intelligent terminal features. +# +# Initialization string 1 sets: +# \E[<0;<1;<2;<4l +# <0 - scrolling enabled +# <1 - blink enabled +# <2 - horizontal scrolling enabled (for alignment) +# <4 - print characters regardless of attributes +# \E[5;0v - normal (80 column) mode +# \E[1;1;80w - margins at columns 1 and 80 +# \E[1;6;<2h +# 1 - print all characters even if protected +# 6 - character protection disabled +# <2 - horizontal scrolling disabled +# - (should reset scrolling regions, but that glitches the screen) +# +# Initialization string 2 sets: +# \E[3;2;2;1;1;1v +# 3;2 - default cursor (solid rectangle) +# 2;1 - 8 bit operations +# 1;1 - international keyboard language +# \E(B - default primary character set (U.S. ASCII) +# \E)4 - default secondary character set (international) +# ^O - primary character set +# +# Reset string 1 sets: +# \Ec - initial mode defaults (RIS) +# \E[<2h - horizontal scrolling disabled +# +# Reset string 2 sets: +# \E[4;0;2;1;1;1v +# 4;0 - jump scrolling +# 2;1 - 8 bit operations +# 1;1 - 8 bit (international) keyboard language +# \E(B - default primary character set (U.S. ASCII) +# \E)4 - default secondary character set (international) +# +d410|d411|d460|d461|Data General DASHER D410/D460 series, + mc5i, + acsc=j$k"l!m#n)q+t'u&v(w%x*, civis=\E[3;0v, + cnorm=\E[3;2v, dch=\E[%p1%dP, dch1=\E[P, dl=\E[%p1%dM, + dl1=\E[M, ich=\E[%p1%d@, ich1=\E[@, il=\E[%p1%dL, il1=\E[L, + is1=\E[<0;<1;<2;<4l\E[5;0v\E[1;1;80w\E[1;6;<2h, + is2=\E[3;2;2;1;1;1v\E(B\E)4\017, mc4=\E[4i, mc5=\E[5i, + ri=\EM, rmacs=\E)4\017, rs1=\Ec\E[<2h, + rs2=\E[4;0;2;1;1;1v\E(B\E)4, + sgr=\E[%?%p1%p3%|%p6%|%t7;%;%?%p4%t5;%;%?%p2%p6%|%t4;%;%?%p1%p5%|%t2;%;m\E)%?%p9%t6\016%e4\017%;, + sgr0=\E[m\E)4\017, smacs=\E)6\016, + use=d211, + +# Initialization string 2 sets: +# \E[3;2;2;0;1;0v +# 3;2 - default cursor (solid rectangle) +# 2;0 - 7 bit operations +# 1;0 - 7 bit (native) keyboard language +# \E(0 - default character set (the keyboard native language) +# ^O - primary character set +# +# Reset string 2 sets: +# \E[4;0;2;0;1;0v +# 4;0 - jump scrolling +# 2;0 - 7 bit operations +# 1;0 - 7 bit (native) keyboard language +# \E(0 - default character set (the keyboard native language) +# +d410-7b|d411-7b|d460-7b|d461-7b|Data General DASHER D410/D460 series in 7 bit mode, + km@, + enacs=\E)6, is2=\E[3;2;2;0;1;0v\E(0\017, rmacs=^O, + rs2=\E[4;0;2;0;1;0v\E(0, + sgr=\E[%?%p1%p3%|%p6%|%t7;%;%?%p4%t5;%;%?%p2%p6%|%t4;%;%?%p1%p5%|%t2;%;m%?%p9%t\016%e\017%;, + sgr0=\E[m\017, smacs=^N, + use=dgkeys+7b, use=d410, + +d410-dg|d460-dg|d411-dg|d461-dg|Data General DASHER D410/D460 series in DG mode, + km, + enacs@, rmacs=\036FS00, + sgr=\036%?%p1%p3%|%p6%|%tD%eE%;%?%p2%p6%|%t\024%e\025%;%?%p4%t\016%e\017%;%?%p1%p5%|%t\034%e\035%;\036FS%?%p9%t11%e00%;, + sgr0=\017\025\035\036E\036FS00, smacs=\036FS11, + use=d400-dg, + +# DASHER D410/D460 series terminals in wide (126 columns) ANSI mode. +# +# Initialization string 1 sets: +# \E[<0;<1;<2;<4l +# <0 - scrolling enabled +# <1 - blink enabled +# <2 - horizontal scrolling enabled (for alignment) +# <4 - print characters regardless of attributes +# \E[5;1v - compressed (135 column) mode +# \E[1;1;126 - margins at columns 1 and 126 +# \E[1;6;<2h +# 1 - print all characters even if protected +# 6 - character protection disabled +# <2 - horizontal scrolling disabled +# - (should reset scrolling regions, but that glitches the screen) +# +# Reset string 1 sets: +# \Ec - initial mode defaults (RIS) +# \E[5;1v - compressed (135 column) mode +# \E[1;1;126w - margins at columns 1 and 126 +# \E[<2h - horizontal scrolling disabled +# +d410-w|d411-w|d460-w|d461-w|Data General DASHER D410/D460 series in wide mode, + cols#126, + is1=\E[<0;<1;<2;<4l\E[5;1v\E[1;1;126w\E[1;6;<2h, + rs1=\Ec\E[5;1v\E[1;1;126w\E[<2h, + use=d410, + +d410-7b-w|d411-7b-w|d460-7b-w|d461-7b-w|Data General DASHER D410/D460 series in wide 7 bit mode, + cols#126, + is1=\E[<0;<1;<2;<4l\E[5;1v\E[1;1;126w\E[1;6;<2h, + rs1=\Ec\E[5;1v\E[1;1;126w\E[<2h, + use=d410-7b, + +d412-dg|d462-dg|d462e-dg|d412+dg|d462+dg|d413-dg|d463-dg|Data General DASHER D412/D462 series in DG mode, + use=d410-dg, + +# These add intelligent features like scrolling regions. +d412-unix|d462-unix|d412+|d462+|Data General DASHER D412+/D462+ series in Unix mode, + civis=\036FQ0, clear=^^FE, cnorm=\036FQ5, + cup=\036FP%p2%2.2X%p1%2.2X, dch1=^^K, dl1=^^FI, + home=^^FG, hpa=\036FP%p1%2.2XFF, ich1=^^J, il1=^^FH, + is2=\036FQ5\036FW\036FJ\036F\^\036FX004F\036O\036FS00, + ll=\036FG\036PA, mc0=^A, rc=\036F}11, ri=^^I, + rs1=\036FA\036FT0, rs2=\036P@1, sc=\036F}10, + vpa=\036FPFF%p1%2.2X, + wind=\036FB%?%p1%t%p1%2.2X0%;%p2%p1%-%{1}%+%2.2X0%?%{23}%p2%>%t000%;\036FX%p3%2.2X%p4%2.2X, use=d216+, +d412-unix-w|d462-unix-w|d412+w|d462+w|Data General DASHER D412+/D462+ series in wide Unix mode, + cols#132, + is2=\036FQ5\036FW\036FK\036F\^\036FX0083\036O\036FS00, + rs2=\036P@1\036FK\036FX0083, + wind=\036FB%?%p1%t%p1%2.2X1%;%p2%p1%-%{1}%+%2.2X1%?%{23}%p2%>%t001%;\036FX%p3%2.2X%p4%2.2X, use=d412-unix, +d412-unix-25|d462-unix-25|d412+25|d462+25|Data General DASHER D412+/D462+ series in Unix mode with 25 lines, + lines#25, + is3=\036Fz2, + wind=\036FB%?%p1%t%p1%2.2X0%;%p2%p1%-%{1}%+%2.2X0%?%{24}%p2%>%t000%;\036FX%p3%2.2X%p4%2.2X, use=d462+, +d412-unix-s|d462-unix-s|d412+s|d462+s|Data General DASHER D412+/D462+ in Unix mode with status line, + eslok, hs, + clear=\036FG\036PH, fsl=\036F}01\022, + is3=\036Fz2\036F}00\036FB180000\036F}01, ll@, + tsl=\036F}00\036FP%p1%2.2X18\036PG, + wind=\036FB%?%p1%t%p1%2.2X0%;%p2%p1%-%{1}%+%2.2X0%?%{23}%p2%>%t%{23}%p2%-%2.2X0%;000\036FX%p3%2.2X%p4%2.2X, use=d462+, + +# Relative cursor motions are confined to the current window, +# which is not what the scrolling region specification expects. +# Thus, relative vertical cursor positioning must be deleted. +d412-unix-sr|d462-unix-sr|d412+sr|d462+sr|Data General DASHER D412+/D462+ in Unix mode with scrolling region, + csr=\036FB%?%p1%t%p1%2.2X0%;%p2%p1%-%{1}%+%2.2X0%?%{23}%p2%>%t000%;, + cud1@, cuu1@, ll@, + use=d462+, + +d413-unix|d463-unix|Data General DASHER D413/D463 series in DG-UNIX mode, + use=d412-unix, +d413-unix-w|d463-unix-w|Data General DASHER D413/D463 series in wide DG-UNIX mode, + use=d412-unix-w, +d413-unix-25|d463-unix-25|Data General DASHER D413/D463 series in DG-UNIX mode with 25 lines, + use=d412-unix-25, +d413-unix-s|d463-unix-s|Data General DASHER D413/D463 in DG-UNIX mode with status line, + use=d412-unix-s, +d413-unix-sr|d463-unix-sr|Data General DASHER D413/D463 in DG-UNIX mode with scrolling region, + use=d412-unix-sr, + +d414-unix|d464-unix|Data General D414/D464 in DG-UNIX mode, + use=d413-unix, +d414-unix-w|d464-unix-w|Data General D414/D464 in wide DG-UNIX mode, + use=d413-unix-w, +d414-unix-25|d464-unix-25|Data General D414/D464 in DG-UNIX mode with 25 lines, + use=d413-unix-25, +d414-unix-s|d464-unix-s|Data General D414/D464 in DG-UNIX mode with status line, + use=d413-unix-s, +d414-unix-sr|d464-unix-sr|Data General D414/D464 in DG-UNIX mode with scrolling region, + use=d413-unix-sr, + +d430c-dg|d430-dg|Data General D430C in DG mode, + use=d413-dg, use=dg+fixed, +d430c-dg-ccc|d430-dg-ccc|Data General D430C in DG mode with configurable colors, + use=d413-dg, use=dg+ccc, + +d430c-unix|d430-unix|Data General D430C in DG-UNIX mode, + use=d413-unix, use=dgunix+fixed, +d430c-unix-w|d430-unix-w|Data General D430C in wide DG-UNIX mode, + use=d413-unix-w, use=dgunix+fixed, +d430c-unix-25|d430-unix-25|Data General D430C in DG-UNIX mode with 25 lines, + use=d413-unix-25, use=dgunix+fixed, +d430c-unix-s|d430-unix-s|Data General D430C in DG-UNIX mode with status line, + use=d413-unix-s, use=dgunix+fixed, +d430c-unix-sr|d430-unix-sr|Data General D430C in DG-UNIX mode with scrolling region, + use=d413-unix-sr, use=dgunix+fixed, +d430c-unix-ccc|d430-unix-ccc|Data General D430C in DG-UNIX mode with configurable colors, + use=d413-unix, use=dgunix+ccc, +d430c-unix-w-ccc|d430-unix-w-ccc|Data General D430C in wide DG-UNIX mode with configurable colors, + use=d413-unix-w, use=dgunix+ccc, +d430c-unix-25-ccc|d430-unix-25-ccc|Data General D430C in DG-UNIX mode with 25 lines and configurable colors, + use=d413-unix-25, use=dgunix+ccc, +d430c-unix-s-ccc|d430-unix-s-ccc|Data General D430C in DG-UNIX mode with status line and configurable colors, + use=d413-unix-s, use=dgunix+ccc, +d430c-unix-sr-ccc|d430-unix-sr-ccc|Data General D430C in DG-UNIX mode with scrolling region and configurable colors, + use=d413-unix-sr, use=dgunix+ccc, + +# DASHER D470C color terminal in ANSI mode. +# Like the D460 but with 16 colors and without a compressed mode. +# +# Initialization string 1 sets: +# \E[<0;<1;<2;<4l +# <0 - scrolling enabled +# <1 - blink enabled +# <2 - horizontal scrolling enabled (for alignment) +# <4 - print characters regardless of attributes +# \E[1;1;80w - margins at columns 1 and 80 +# \E[1;6;<2h +# 1 - print all characters even if protected +# 6 - character protection disabled +# <2 - horizontal scrolling disabled +# - (should reset scrolling regions, but that glitches the screen) +# +d470c|d470|Data General DASHER D470C, + is1=\E[<0;<1;<2;<4l\E[1;1;80w\E[1;6;<2h, + sgr=\E[%?%p1%p3%|%p6%|%t7;%{1}%e%{0}%;%PR%?%p4%t5;%{1}%e%{0}%;%PB%?%p2%p6%|%t4;%{1}%e%{0}%;%PU%?%p1%p5%|%t2;%{1}%e%{0}%;%PDm\E)%?%p9%t6\016%e4\017%;, + use=dg+color, use=d460, + +d470c-7b|d470-7b|Data General DASHER D470C in 7 bit mode, + is1=\E[<0;<1;<2;<4l\E[1;1;80w\E[1;6;<2h, + sgr=\E[%?%p1%p3%|%p6%|%t7;%{1}%e%{0}%;%PR%?%p4%t5;%{1}%e%{0}%;%PB%?%p2%p6%|%t4;%{1}%e%{0}%;%PU%?%p1%p5%|%t2;%{1}%e%{0}%;%PDm%?%p9%t\016%e\017%;, + use=dg+color, use=d460-7b, + +# Initialization string 2 sets: +# ^^FQ2 - default cursor (solid rectangle) +# ^^FW - character protection disabled +# ^^F\^ - horizontal scrolling enabled (for alignment) +# ^^FX004? - margins at columns 0 and 79 +# ^^F] - horizontal scrolling disabled +# ^^O - primary character set +# ^^FS00 - default character set (the keyboard native language) +# - (should reset scrolling regions, but that glitches the screen) +# +d470c-dg|d470-dg|Data General DASHER D470C in DG mode, + is2=\036FQ2\036FW\036F\^\036FX004?\036F]\036O\036FS00, + use=dgmode+color, use=d460-dg, + +# DASHER D555 terminal in ANSI mode. +# Like a D411, but has an integrated phone. +d555|Data General DASHER D555, + use=d411, +d555-7b|Data General DASHER D555 in 7-bit mode, + use=d411-7b, +d555-w|Data General DASHER D555 in wide mode, + use=d411-w, +d555-7b-w|Data General DASHER D555 in wide 7-bit mode, + use=d411-7b-w, +d555-dg|Data General DASHER D555 series in DG mode, + use=d411-dg, + +# DASHER D577 terminal in ANSI mode. +# Like a D411, but acts as a keyboard for serial printers ("KSR" modes). +d577|Data General DASHER D577, + use=d411, +d577-7b|Data General DASHER D577 in 7-bit mode, + use=d411-7b, +d577-w|Data General DASHER D577 in wide mode, + use=d411-w, +d577-7b-w|Data General DASHER D577 in wide 7-bit mode, + use=d411-7b-w, + +d577-dg|d578-dg|Data General DASHER D577/D578 series in DG mode, + use=d411-dg, + +# DASHER D578 terminal. +# Like a D577, but without compressed mode; like a D470C in this respect. +# +# Initialization string 1 sets: +# \E[<0;<1;<2;<4l +# <0 - scrolling enabled +# <1 - blink enabled +# <2 - horizontal scrolling enabled (for alignment) +# <4 - print characters regardless of attributes +# \E[1;1;80w - margins at columns 1 and 80 +# \E[1;6;<2h +# 1 - print all characters even if protected +# 6 - character protection disabled +# <2 - horizontal scrolling disabled +# - (should reset scrolling regions, but that glitches the screen) +# +d578|Data General DASHER D578, + is1=\E[<0;<1;<2;<4l\E[1;1;80w\E[1;6;<2h, use=d577, +d578-7b|Data General DASHER D578 in 7-bit mode, + is1=\E[<0;<1;<2;<4l\E[1;1;80w\E[1;6;<2h, + use=d577-7b, + +#### Datamedia (dm) +# +# Datamedia was headquartered in Nashua, New Hampshire in 1993. +# As of early 1996, at least one company called `Datamedia' has been taken +# over by: +# +# Axent Technologies, Inc. +# 2400 Research Boulevard +# Rockville, Maryland 20850 +# voice: +1 301/258-5043 +# fax: +1 301/330-5756 +# email: <info@axent.com> +# +# makers of OmniGuard client/server security software. They are a software +# only company and no longer make terminals. However, the operator there +# told me that she had once spoken to a customer looking for Datamedia +# terminals who'd mentioned a Datamedia in New Jersey. This is backed up +# by comp.terminals posting describing the ID plate on the back of a +# "Datamedia 3000" terminal. Was this an earlier incarnation of Axent? +# Inquiring minds want to know... +# + +cs10|colorscan|Datamedia Color Scan 10, + msgr, + cols#80, lines#24, + bel=^G, clear=\E[H\E[J, cr=^M, cub1=^H, cud1=^J, cuf1=\E[C, + cup=\E[%i%p1%02d;%p2%02dH, cuu1=\E[A, ed=\E[J, el=\E[K, + ind=^J, kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A, + kf1=\EOP, kf2=\EOQ, kf3=\EOR, kf4=\EOS, rmso=\E[m, rmul=\E[m, + sgr0=\E[m, smso=\E[7m, smul=\E[4m, +cs10-w|Datamedia Color Scan 10 with 132 columns, + cols#132, + cup=\E[%i%p1%02d;%p2%03dH, use=cs10, + +# (dm1520: removed obsolete ":ma=^\ ^_^P^YH:" -- esr) +dm1520|dm1521|datamedia 1520, + am, xenl, + cols#80, it#8, lines#24, + bel=^G, clear=^L, cr=^M, cub1=^H, cud1=^J, cuf1=^\, + cup=\036%p2%{32}%+%c%p1%{32}%+%c, cuu1=^_, ed=^K, el=^], + home=^Y, ht=^I, ind=^J, kcub1=^H, kcud1=^J, kcuf1=^\, kcuu1=^_, + khome=^Y, +# dm2500: this terminal has both <ich> and <smir>. Applications using +# termcap/terminfo directly (rather than through ncurses) might be confused. +dm2500|datamedia2500|datamedia 2500, + cols#80, lines#24, + bel=^G, clear=^^^^\177, cub1=^H, cud1=^J, cuf1=^\, + cup=\014%p2%{96}%^%c%p1%{96}%^%c, cuu1=^Z, + dch1=\020\010\030\035$<10*>, + dl1=\020\032\030\035$<10*>, el=^W, home=^B, + ich1=\020\034\030\035$<10*>, + il1=\020\n\030\035\030\035$<15>, ind=^J, pad=\377, + rmdc=^X^], rmir=\377\377\030\035$<10>, rmso=^X^], + smdc=^P, smir=^P, smso=^N, +# dmchat is like DM2500, but DOES need "all that padding" (jcm 1/31/82) +# also, has a meta-key. +# From: <goldberger@su-csli.arpa> +# (dmchat: ":MT:" changed to ":km:" -- esr) +dmchat|dmchat version of datamedia 2500, + km, + dl1=\020\032\030\035$<2/>, + il1=\020\n\030\035\030\035$<1*/>, use=dm2500, +# (dm3025: ":MT:" changed to ":km:" -- esr) +dm3025|datamedia 3025a, + km, + cols#80, it#8, lines#24, + bel=^G, clear=\EM$<2>, cr=^M, cub1=^H, cud1=^J, cuf1=\EC, + cup=\EY%p2%{32}%+%c%p1%{32}%+%c, cuu1=\EA, + dch1=\010$<6>, dl1=\EP\EA\EQ$<130>, ed=\EJ$<2>, el=\EK, + home=\EH, ht=^I, il1=\EP\n\EQ$<130>, ind=^J, ip=$<6>, + is2=\EQ\EU\EV, rmdc=\EQ, rmir=\EQ, rmso=\EO0, smdc=\EP, + smir=\EP, smso=\EO1, +dm3045|datamedia 3045a, + am, eo, km@, ul, xenl, + dch1=\EB$<6>, dl1@, il1@, is2=\EU\EV, kcuf1=\EC, kcuu1=\EA, + kf0=\Ey\r, kf1=\Ep\r, kf2=\Eq\r, kf3=\Er\r, kf4=\Es\r, + kf5=\Et\r, kf6=\Eu\r, kf7=\Ev\r, kf8=\Ew\r, kf9=\Ex\r, + khome=\EH, pad=\177, rmdc@, rmir=\EP, rmso@, smdc@, smso@, + use=dm3025, +# Datamedia DT80 soft switches: +# 1 0=Jump 1=Smooth +# Autorepeat 0=off 1=on +# Screen 0=Dark 1=light +# Cursor 0=u/l 1=block +# +# 2 Margin Bell 0=off 1=on +# Keyclick 0=off 1=on +# Ansi/VT52 0=VT52 1=Ansi +# Xon/Xoff 0=Off 1=On +# +# 3 Shift3 0=Hash 1=UK Pound +# Wrap 0=Off 1=On +# Newline 0=Off 1=On +# Interlace 0=Off 1=On +# +# 4 Parity 0=Odd 1=Even +# Parity 0=Off 1=On +# Bits/Char 0=7 1=8 +# Power 0=60Hz 1=50Hz +# +# 5 Line Interface 0=EIA 1=Loop +# Aux Interface 0=EIA 1=Loop +# Local Copy 0=Off 1=On +# Spare +# +# 6 Aux Parity 0=Odd 1=Even +# Aux Parity 0=Off 1=On +# Aux Bits/Char 0=7 1=8 +# CRT Saver 0=Off 1=On +# dm80/1 is a vt100 lookalike, but it doesn't seem to need any padding. +dm80|dmdt80|dt80|datamedia dt80/1, + clear=\E[2J\E[H, cud1=^J, cuf1=\E[C, + cup=%i\E[%p1%d;%p2%dH, cuu1=\E[A, ed=\E[J, el=\E[K, + home=\E[H, mc0=\E[0i, mc4=\E[4i, mc5=\E[5i, ri=\EM, + rmso=\E[m, rmul=\E[m, sgr0=\E[m, smso=\E[7m, smul=\E[4m, + use=vt100, +# except in 132 column mode, where it needs a little padding. +# This is still less padding than the vt100, and you can always turn on +# the ^S/^Q handshaking, so you can use vt100 flavors for things like +# reverse video. +dm80w|dmdt80w|dt80w|datamedia dt80/1 in 132 char mode, + cols#132, + clear=\E[H\E[2J$<50/>, cud1=^J, + cup=\E[%i%p1%d;%p2%dH$<5/>, cuu1=\E[A$<5/>, + ed=\E[0J$<20/>, el=\E[0K$<20/>, use=dm80, +# From: Adam Thompson <thompson@xanth.magic.mb.ca> Sept 10 1995 +dt80-sas|Datamedia DT803/DTX for SAS usage, + am, bw, + cols#80, lines#24, + acsc=``a1fxgqh0jYk?lZm@nEooppqDrrsstCu4vAwBx3yyzz{{||}}~~, + bel=^G, clear=^L, cr=^M, + csr=\E=%p1%{32}%+%c%{32}%c\E#1\E=%p2%{32}%+%c%{32}%c\E#2, + cub1=^H, cud1=\EB, cuf1=^\, + cup=\E=%p2%{32}%+%c%p1%{32}%+%c, cuu1=^_, dl1=\EM, ed=^K, + el=^], ff=^L, home=^Y, ht=^I, hts=\E'1, il1=\EL, ind=\EB, + is2=\E)0\E<\EP\E'0\E$2, kclr=^L, kcub1=^H, kcud1=^J, + kcuf1=^\, kcuu1=^_, ked=^K, kel=^], khome=^Y, mc4=^O, mc5=^N, + rev=\E$2\004, ri=\EI, rmacs=\EG, rmso=^X, sgr0=^X, smacs=\EF, + smso=\E$2\004, tbc=\E'0, + +# Datamedia Excel 62, 64 from Gould/SEL UTX/32 via BRL +# These aren't end-all Excel termcaps; but do insert/delete char/line +# and name some of the extra function keys. (Mike Feldman ccvaxa!feldman) +# The naming convention has been bent somewhat, with the use of E? (where +# E is for 'Excel') as # a name. This was done to distinguish the entries +# from the other Datamedias in use here, and yet to associate a model of +# the Excel terminals with the regular datamedia terminals that share +# major characteristics. +excel62|excel64|datamedia Excel 62, + dch1=\E[P, kbs=^H, kcub1=^H, kcud1=^J, kf5=\EOu, kf6=\EOv, + kf7=\EOw, kf8=\EOx, kf9=\EOy, rmir=\E[4l, smir=\E[4h, + use=dt80, +excel62-w|excel64-w|datamedia Excel 62 in 132 char mode, + dch1=\E[P, kbs=^H, kcub1=^H, kcud1=^J, kf5=\EOu, kf6=\EOv, + kf7=\EOw, kf8=\EOx, kf9=\EOy, rmir=\E[4l, smir=\E[4h, + use=dt80w, +excel62-rv|excel64-rv|datamedia Excel 62 in reverse video mode, + dch1=\E[P, flash=\E[?5l\E[?5h, kbs=^H, kcub1=^H, kcud1=^J, + kf5=\EOu, kf6=\EOv, kf7=\EOw, kf8=\EOx, kf9=\EOy, rmir=\E[4l, + smir=\E[4h, + use=dt80, + +#### Falco +# +# Falco Data Products +# 440 Potrero Avenue +# Sunnyvale, CA 940864-196 +# Vox: (800)-325-2648 +# Fax: (408)-745-7860 +# Net: techsup@charm.sys.falco.com +# +# Current Falco models as of 1995 are generally ANSI-compatible and support +# emulations of DEC VT-series, Wyse, and Televideo types. +# + +# Test version for Falco ts-1. See <arpavax.hickman@ucb> for info +# This terminal was released around 1983 and was discontinued long ago. +# The standout and underline highlights are the same. +falco|ts1|ts-1|falco ts-1, + am, + cols#80, it#8, lines#24, + bel=^G, clear=\E*, cr=^M, cub1=^H, cud1=^J, cuf1=^L, + cup=\E=%p1%{32}%+%c%p2%{32}%+%c, cuu1=^K, dch1=\EW, + dl1=\ER, ed=\EY, el=\ET\EG0\010, home=^^, ht=^I, il1=\EE, + ind=^J, is2=\Eu\E3, kcub1=^H, kcud1=^J, kcuf1=^L, kcuu1=^K, + kf0=^A0\r, rmir=\Er, rmso=\Eg0, rmul=\Eg0, sgr0=\Eg0, + smir=\Eq, smso=\Eg1, smul=\Eg1, +falco-p|ts1p|ts-1p|falco ts-1 with paging option, + am, da, db, mir, msgr, ul, + cols#80, it#8, lines#24, + bel=^G, cbt=\EI, clear=\E*, cr=^M, cub1=^H, cud1=\E[B, + cuf1=\E[C, cup=\E=%p1%{32}%+%c%p2%{32}%+%c, cuu1=\E[A, + dch1=\EW, dl1=\ER, ed=\EY, el=\ET\EG0\010\Eg0, ht=^I, + il1=\EE, ind=^J, is2=\EZ\E3\E_c, kcub1=\E[D, kcud1=\E[B, + kcuf1=\E[C, kcuu1=\E[A, khome=\E[H, rmcup=\E_b, rmir=\Er, + rmso=\Eg0, rmul=\Eg0, sgr0=\Eg0, smcup=\E_d, smir=\Eq, + smso=\Eg4, smul=\Eg1, +# (ts100: I added <rmam>/<smam> based on the init string -- esr) +ts100|ts100-sp|falco ts100-sp, + am, mir, msgr, xenl, xon, + cols#80, it#8, lines#24, vt#3, + acsc=``aaffggjjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~, + bel=^G, blink=\E[5m$<2>, bold=\E[1m$<2>, + clear=\E[H\E[J$<50>, cr=^M, csr=\E[%i%p1%d;%p2%dr, + cub=\E[%p1%dD, cub1=^H, cud=\E[%p1%dB, cud1=^J, + cuf=\E[%p1%dC, cuf1=\E[C$<2>, + cup=\E[%i%p1%d;%p2%dH$<5>, cuu=\E[%p1%dA, + cuu1=\E[A$<2>, dch1=\E~W, dl1=\E~R, ed=\E[J$<50>, + el=\E[K$<3>, el1=\E[1K$<3>, enacs=\E(B\E)0, home=\E[H, + ht=^I, hts=\EH, ich1=\E~Q, il1=\E~E, ind=^J, is1=\E~)\E~ea, + ka1=\EOq, ka3=\EOs, kb2=\EOr, kbs=^H, kc1=\EOp, kc3=\EOn, + kcub1=\EOD, kcud1=\EOB, kcuf1=\EOC, kcuu1=\EOA, kent=\EOM, + kf0=\EOy, kf1=\EOP, kf10=\EOx, kf2=\EOQ, kf3=\EOR, kf4=\EOS, + kf5=\EOt, kf6=\EOu, kf7=\EOv, kf8=\EOl, kf9=\EOw, rc=\E8, + rev=\E[7m$<2>, ri=\EM$<5>, rmacs=^O, rmam=\E[?7l, + rmkx=\E[?1l\E>, rmso=\E[m$<2>, rmul=\E[m$<2>, + rs2=\E>\E[?3l\E[?4l\E[?5l\E[?7h\E[?8h, sc=\E7, + sgr=\E[0%?%p1%p6%|%t;1%;%?%p2%t;4%;%?%p1%p3%|%t;7%;%?%p4%t;5%;m%?%p9%t\016%e\017%;, + sgr0=\E[m\017$<2>, smacs=^N, smam=\E[?7h, smkx=\E[?1h\E=, + smso=\E[1;7m$<2>, smul=\E[4m$<2>, tbc=\E[3g, +ts100-ctxt|falco ts-100 saving context, + rmcup=\E~_b, smcup=\E~_d\E[2J, use=ts100, + +#### Florida Computer Graphics +# + +# Florida Computer Graphics Beacon System, using terminal emulator program +# "host.com", as provided by FCG. This description is for an early release +# of the "host" program. Known bug: <ed> clears the whole screen, so it's +# commented out. + +# From: David Bryant <cbosg!djb> 1/7/83 +beacon|FCG Beacon System, + am, da, db, + cols#80, lines#32, + bel=\ESTART\r\E37\r\EEND\r$<1>, + blink=\ESTART\r\E61\,1\r\EEND\r, clear=\EZ$<10>, cr=^M, + cub1=^H, cud1=^J, cuf1=\EV, + cup=\E=%p1%{32}%+%c%p2%{32}%+%c$<20>, cuu1=\EU, + dch1=\EW, dl1=\ER, el=\ET, home=\EH$<10>, ich1=\EQ, il1=\EE, + ind=^J, rev=\ESTART\r\E59\,1\r\EEND\r, rmcup=, + rmso=\ESTART\r\E70\,0\r\EEND\r$<20>, + rmul=\ESTART\r\E60\,0\r\EEND\r, + sgr0=\ESTART\r\E78\r\E70\,0\r\EEND\r$<20>, + smcup=\ESTART\r\E2\,0\r\E12\r\EEND\r$<10>, + smso=\ESTART\r\E70\,6\r\EEND\r$<20>, + smul=\ESTART\r\E60\,1\r\EEND\r, + +#### Fluke +# + +# The f1720a differences from ANSI: no auto margin, destructive +# tabs, # of lines, funny highlighting and underlining +f1720|f1720a|fluke 1720A, + xt, + cols#80, lines#16, xmc#1, + bel=^G, clear=\E[H\E[2J, cr=^M, cub1=^H, cud1=\E[B, + cuf1=\E[C, cup=\E[%i%p1%d;%p2%dH, cuu1=\E[A, ed=\E[J, + el=\E[K, ind=\ED, is2=\E[H\E[2J, kcub1=^_, kcud1=^], + kcuf1=^^, kcuu1=^\, ri=\EM, rmso=\E[m, rmul=\E[m, sgr0=\E[m, + smso=\E[7m, smul=\E[4m, + +#### Liberty Electronics (Freedom) +# +# Liberty Electronics +# 48089 Fremont Blvd +# Fremont CA 94538 +# Vox: (510)-623-6000 +# Fax: (510)-623-7021 + +# From: <faletti@berkeley.edu> +# (f100: added empty <acsc> to suppress a tic warning; +# made this relative to adm+sgr -- note that <invis> isn't +# known to work for f100 but does on the f110. --esr) +f100|freedom|freedom100|freedom model 100, + am, bw, hs, mir, msgr, xon, + cols#80, lines#24, + acsc=, bel=^G, cbt=\EI, clear=^Z, cr=^M, cub1=^H, cud1=^J, + cuf1=^L, cup=\E=%p1%{32}%+%c%p2%{32}%+%c, cuu1=^K, + dch1=\EW, dl1=\ER$<11.5*>, dsl=\Eg\Ef\r, ed=\EY, el=\ET, + flash=\Eb$<200>\Ed, fsl=^M, home=^^, hpa=\E]%p1%{32}%+%c, + ht=^I, hts=\E1, il1=\EE$<8.5*>, ind=^J, ip=$<6>, + is2=\Eg\Ef\r\Ed, kbs=^H, kcbt=\EI, kcub1=^H, kcud1=^V, + kcuf1=^L, kcuu1=^K, kf1=^A@\r, kf10=^AI\r, kf2=^AA\r, + kf3=^AB\r, kf4=^AC\r, kf5=^AD\r, kf6=^AE\r, kf7=^AF\r, + kf8=^AG\r, kf9=^AH\r, khome=^^, ri=\Ej, rmacs=\E$, rmir=\Er, + smacs=\E%, smir=\Eq, tbc=\E3, tsl=\Eg\Ef, + vpa=\E[%p1%{32}%+%c, use=adm+sgr, +f100-rv|freedom-rv|freedom 100 in reverse video, + flash=\Ed$<200>\Eb, is2=\Eg\Ef\r\Eb, use=f100, +# The f110 and f200 have problems with vi(1). They use the ^V +# code for the down cursor key. When kcud1 is defined in terminfo +# as ^V, the Control Character Quoting capability (^V in insert mode) +# is lost! It cannot be remapped in vi because it is necessary to enter +# a ^V to to quote the ^V that is being remapped!!! +# +# f110/f200 users will have to decide whether +# to lose the down cursor key or the quoting capability. We will opt +# initially for leaving the quoting capability out, since use of VI +# is not generally applicable to most interactive applications +# (f110: added <ht>, <khome> & <kcbt> from f100 -- esr) +f110|freedom110|Liberty Freedom 110, + bw@, eslok, + it#8, wsl#80, + blink=\EG2, bold=\EG0, civis=\E.1, cnorm=\E.2, cud1=^V, + cvvis=\E.2, dim=\EG@, dl1=\ER, dsl=\Ef\r, + flash=\Eb$<200/>\Ed, il1=\EE, ip@, is2@, kclr=^^, kdch1=\EW, + kdl1=\ER, ked=\EY, kel=\ET, kf0=^AI\r, kf10@, kich1=\EQ, + kil1=\EE, mc4=\Ea, mc5=\E`, ri=\EJ, rmacs=\E%%, rmir=\Er\EO, + smacs=\E$, smir=\EO\Eq, smso=\EG<, tsl=\Ef, + use=f100, +f110-14|Liberty Freedom 110 14inch, + dch1@, use=f110, +f110-w|Liberty Freedom 110 - 132 cols, + cols#132, use=f110, +f110-14w|Liberty Freedom 110 14in/132 cols, + cols#132, + dch1@, use=f110, +# (f200: added <acsc> to suppress tic warnings re <smacs>/<rmacs> --esr) +f200|freedom200|Liberty Freedom 200, + am, eslok, hs, mir, msgr, xon, + cols#80, it#8, lines#24, wsl#80, + acsc=, bel=^G, blink=\EG2, bold=\EG0, cbt=\EI, civis=\E.0, + clear=^Z, cnorm=\E.1, cr=^M, + csr=\Em0%p1%{32}%+%c%p2%{32}%+%c, cub1=^H, cud1=^V, + cuf1=^L, cup=\E=%p1%{32}%+%c%p2%{32}%+%c, cuu1=^K, + cvvis=\E.1, dch1=\EW, dim=\EG@, dl1=\ER, dsl=\Ef\r, ed=\EY, + el=\ET, flash=\Eo$<200/>\En, fsl=^M, home=^^, + hpa=\E]%p1%{32}%+%c, hts=\E1, il1=\EE, ind=^J, kbs=^H, + kclr=^^, kcub1=^H, kcud1=^V, kcuf1=^L, kcuu1=^K, kdch1=\EW, + kdl1=\ER, ked=\EY, kel=\ET, kf0=^AI\r, kf1=^A@\r, kf2=^AA\r, + kf3=^AB\r, kf4=^AC\r, kf5=^AD\r, kf6=^AE\r, kf7=^AF\r, + kf8=^AG\r, kf9=^AH\r, kich1=\EQ, kil1=\EE, mc4=\Ea, mc5=\E`, + ri=\EJ, rmacs=\E%%, rmir=\Er, smacs=\E$, smir=\Eq, smso=\EG<, + tbc=\E3, tsl=\Ef, vpa=\E[%p1%{32}%+%c, + use=adm+sgr, +f200-w|Liberty Freedom 200 - 132 cols, + cols#132, use=f200, +# The f200 has the ability to reprogram the down cursor key. The key is +# reprogrammed to ^J (linefeed). This value is remembered in non-volatile RAM, +# so powering the terminal off and on will not cause the change to be lost. +f200vi|Liberty Freedom 200 for vi, + flash=\Eb$<200/>\Ed, kcud1=^J, use=f200, +f200vi-w|Liberty Freedom 200 - 132 cols for vi, + cols#132, use=f200vi, + +#### GraphOn (go) +# +# Graphon Corporation +# 544 Division Street +# Campbell, CA 95008 +# Vox: (408)-370-4080 +# Fax: (408)-370-5047 +# Net: troy@graphon.com (Troy Morrison) +# +# +# The go140 and go225 have been discontinued. GraphOn now makes X terminals, +# including one odd hybrid that starts out life on power-up as a character +# terminal, than can be switched to X graphics mode (driven over the serial +# line) by an escape sequence. No info on this beast yet. +# (go140: I added <rmam>/<smam> based on the init string -- esr) +go140|graphon go-140, + cols#80, it#8, lines#24, + clear=\E[H\E[2J$<10/>, cub1=^H, cuf1=\E[C, + cup=\E[%i%p1%2d;%p2%2dH, cuu1=\E[A, dch1=\E[P, dl1=\E[M, + ed=\E[J$<10/>, el=\E[K, ht=^I, + if=/usr/share/tabset/vt100, il1=\E[L, + is2=\E<\E=\E[?3l\E[?7l\E(B\E[J\E7\E[;r\E8\E[m\E[q, + kcub1=\EOD, kcud1=\EOB, kcuf1=\EOC, kcuu1=\EOA, kf1=\EOP, + kf2=\EOQ, kf3=\EOR, kf4=\EOS, khome=\E[H, ri=\EM, + rmam=\E[?7l, rmir=\E[4l, rmkx=\E[?1l\E>, rmso=\E[m, + rmul=\E[m, sgr0=\E[m, smam=\E[?7h, smir=\E[4h, + smkx=\E[?1h\E=, smso=\E[7m, smul=\E[4m, +go140w|graphon go-140 in 132 column mode, + am, + cols#132, + is2=\E<\E=\E[?3h\E[?7h\E(B\E[J\E7\E[;r\E8\E[m\E[q, use=go140, +# Hacked up vt200 termcap to handle GO-225/VT220 +# From: <edm@nwnexus.WA.COM> +# (go225: I added <rmam>/<smam> based on the init string -- esr) +go225|go-225|Graphon 225, + am, mir, xenl, + cols#80, it#8, lines#25, vt#3, + blink=\E[5m, bold=\E[1m, clear=\E[H\E[J, + csr=\E[%i%p1%d;%p2%dr, cub1=^H, cud1=^J, cuf1=\E[C, + cup=\E[%i%p1%d;%p2%dH, cuu1=\E[A, dch1=\E[P, dl1=\E[M, + ed=\E[J, el=\E[K, home=\E[H, ht=^I, il1=\E[L, ind=\ED, + is2=\E>\E[?3l\E[?4l\E[?5l\E[?7h\E[?8h, kbs=^H, + kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A, kf1=\EOP, + kf2=\EOQ, kf3=\EOR, kf4=\EOS, khome=\E[H, rc=\E8, rev=\E[7m, + rf=/usr/share/tabset/vt100, ri=\EM, rmam=\E[?7l, + rmcup=\E[!p\E[?7h\E[2;1;1#w, rmir=\E[4l, rmkx=\E>, + rmso=\E[27m, rmul=\E[24m, rs1=\E[!p\E[?7h\E[2;1;1#w, + sc=\E7, sgr0=\E[m, smam=\E[?7h, smcup=\E[2;0#w\E[1;25r, + smir=\E[4h, smkx=\E=, smso=\E[7m, smul=\E[4m, + +#### Harris (Beehive) +# +# Bletch. These guys shared the Terminal Brain Damage laurels with Hazeltine. +# Their terminal group is ancient history now (1995) though the parent +# company is still in business. +# + +# Beehive documentation is undated and marked Preliminary and has no figures +# so we must have early Superbee2 (Model 600, according to phone conversation +# with mfr.). It has proved reliable except for some missing padding +# (notably after \EK and <nl> at bottom of screen). +# +# The key idea is that AEP mode is poison for <cup> & that US's in +# the local memory should be avoided like the plague. That means +# that the 2048 character local buffer is used as 25 lines of 80 +# characters, period. No scrolling local memory, folks. It also +# appears that we cannot use naked INS LINE feature since it uses +# US. The sbi fakes <il1> with an 80-space insert that may be too +# slow at low speeds; also spaces get converted to \040 which is +# too long for some programs (not vi). DEL LINE is ok but slow. +# +# The <nl> string is designed for last line of screen ONLY; cup to +# 25th line corrects the motion inherent in scrolling to Page 1. +# +# There is one understood bug. It is that the screen appears to +# pop to a new (blank) page after a <nel>, or leave a half-line +# ellipsis to a quad that is the extra 48 memory locations. The +# data received is dumped into memory but not displayed. Not to +# worry if <cup> is being used; the lines not displayed will be, +# whenever the cursor is moved up there. Since <cup> is addressed +# relative to MEMORY of window, nothing is lost; but beware of +# relative cursor motion (<cuu1>,<cud1>,<cuf1>,<cub1>). Recommended, +# therefore, is setenv MORE -c . +# +# WARNING: Not all features tested. +# +# Timings are assembled from 3 sources. Some timings may reflect +# SB2/Model 300 that were used if more conservative. +# Tested on a Model 600 at 1200 and 9600 bd. +# +# The BACKSPACEkb option is cute. The NEWLINE key, so cleverly +# placed on the keyboard and useless because of AEP, is made +# into a backspace key. In use ESC must be pressed twice (to send) +# and sending ^C must be prefixed by ESC to avoid that weird +# transmit mode associated with ENTER key. +# +# IF TERMINAL EVER GOES CATATONIC with the cursor buzzing across +# the screen, then it has dropped into ENTER mode; hit +# RESET--ONLINE--!tset. +# +# As delivered this machine has a FATAL feature that will throw +# it into that strange transmit state (SPOW) if the space bar is +# hit after a CR is received, but before receiving a LF (or a +# few others). +# +# The circuits MUST be modified to eliminate the SPOW latch. +# This is done by strapping on chip A46 of the I/O board; cut +# the p.c. connection to Pin 5 and strap Pin 5 to Pin 8 of that +# chip. This mod has been checked out on a Mod 600 of Superbee II. +# With this modification absurdly high timings on cr are +# unnecessary. +# +# NOTE WELL that the rear panel switch should be set to CR/LF, +# not AEP! +# +sb1|beehive superbee, + am, bw, da, db, mir, ul, xsb, + cols#80, lines#25, xmc#1, + bel=^G, cbt=\E`$<650>, clear=\EH$<1>\EJ$<3>, cr=$<1>\r, + cub1=^H, cud1=^J, cuf1=\EC$<3>, cup=\EF%p2%03d%p1%03d, + cuu1=\EA$<3>, dch1=\EP$<3>, dl1=\EM$<100>, ed=\EJ$<3>, + el=\EK$<3>, home=\EH$<1>, ht=^I, hts=\E1, + il1=\EN\EL$<3>\EQ \EP$<3> \EO\ER\EA$<3>, + ind=^J, is2=\EE$<3>\EX\EZ\EO\Eb\Eg\ER, kbs=^_, kcub1=\ED, + kcud1=\EB, kcuf1=\EC, kcuu1=\EA, kdl1=\EM, ked=\EJ, kel=\EK, + kf0=\E2, kf1=\Ep, kf2=\Eq, kf3=\Er, kf4=\Es, kf5=\Et, kf6=\Eu, + kf7=\Ev, kf8=\Ew, kf9=\E1, khome=\EH, kich1=\EQ\EO, + krmir=\ER, lf0=TAB CLEAR, lf9=TAB SET, rmcup=, rmir=\ER, + rmso=\E_3, rmul=\E_3, sgr0=\E_3, smcup=\EO, smir=\EQ\EO, + smso=\E_1, smul=\E_0, tbc=\E3, +sbi|superbee|beehive superbee at Indiana U., + xsb, + cr=\r$<1>, il1=1\EN\EL$<9>\EQ \EP$<9> \EO\ER\EA, use=sb1, +# Alternate (older) description of Superbee - f1=escape, f2=^C. +# Note: there are at least 3 kinds of superbees in the world. The sb1 +# holds onto escapes and botches ^C's. The sb2 is the best of the 3. +# The sb3 puts garbage on the bottom of the screen when you scroll with +# the switch in the back set to CRLF instead of AEP. This description +# is tested on the sb2 but should work on all with either switch setting. +# The f1/f2 business is for the sb1 and the <xsb> can be taken out for +# the other two if you want to try to hit that tiny escape key. +# This description is tricky: being able to use cup depends on there being +# 2048 bytes of memory and the hairy <nl> string. +superbee-xsb|beehive super bee, + am, da, db, xsb, + cols#80, it#8, lines#25, + clear=\EH\EJ$<3>, cnorm=^J, cr=\r$<1000>, cub1=^H, cud1=^J, + cuf1=\EC, cup=\EF%p2%3d%p1%3d, cuu1=\EA$<3>, + dch1=\EP$<3>, dl1=\EM$<100>, ed=\EJ$<3>, el=\EK$<3>, + home=\EH, ht=^I, hts=\E1, + ind=\n\0\0\0\n\0\0\0\EA\EK\0\0\0\ET\ET, is2=\EH\EJ, + kcub1=\ED, kcud1=\EB, kcuf1=\EC, kcuu1=\EA, kf1=\Ep, kf2=\Eq, + kf3=\Er, kf4=\Es, kf5=\Et, kf6=\Eu, kf7=\Ev, kf8=\Ew, + khome=\EH, rmso=\E_3, sgr0=\E_3, smso=\E_1, tbc=\E3, +# This loses on lines > 80 chars long, use at your own risk +superbeeic|super bee with insert char, + ich1=, rmir=\ER, smir=\EQ, use=superbee-xsb, +sb2|sb3|fixed superbee, + xsb@, use=superbee, + +# Reports are that most of these Beehive entries (except superbee) have not +# been tested and do not work right. <rmso> is a trouble spot. Be warned. + +# (bee: <ich1> was empty, which is obviously bogus -- esr) +beehive|bee|harris beehive, + am, mir, + cols#80, lines#24, + cbt=\E>, clear=\EE, cub1=^H, cud1=\EB, cuf1=\EC, + cup=\EF%p1%{32}%+%c%p2%{32}%+%c, cuu1=\EA, dch1=\EP, + dl1=\EM, ed=\EJ, el=\EK, home=\EH, il1=\EL, kbs=^H, kcbt=\E>, + kclr=\EE, kcub1=\ED, kcud1=\EB, kcuf1=\EC, kcuu1=\EA, + kdch1=\EP, kdl1=\EM, kel=\EK, khome=\EH, kich1=\EQ, kil1=\EL, + krmir=\E@, rmir=\E@, rmso=\Ed@, rmul=\Ed@, sgr0=\Ed@, + smir=\EQ, smso=\EdP, smul=\Ed`, +# set tab is ^F, clear (one) tab is ^V, no way to clear all tabs. +# good grief - does this entry make :sg:/:ug: when it doesn't have to? +# look at those spaces in <rmso>/<smso>. Seems strange to me... +# (beehive: <if=/usr/share/tabset/beehive> removed, no such file. If you +# really care, cook up one using ^F -- esr) +beehive3|bh3m|beehiveIIIm|harris beehive 3m, + am, + cols#80, it#8, lines#20, + bel=^G, clear=^E^R, cr=^M, cub1=^H, cud1=^J, cuf1=^L, cuu1=^K, + dl1=\021$<350>, ed=^R, el=^P, home=^E, ht=^I, hts=^F, + il1=\023$<160>, ind=^J, ll=^E^K, rmso=\s^_, smso=^]\s, +beehive4|bh4|beehive 4, + am, + cols#80, lines#24, + bel=^G, clear=\EE, cr=^M, cub1=\ED, cud1=^J, cuf1=\EC, + cuu1=\EA, ed=\EJ, el=\EK, home=\EH, ind=^J, +microb|microbee|micro bee series, + am, + cols#80, it#8, lines#24, + bel=^G, clear=\EE, cr=^M, cub1=^H, cud1=^J, cuf1=\EC, + cup=\EF%p1%{32}%+%c%p2%{32}%+%c, cuu1=\EA, ed=\EJ, + el=\EK, ht=^I, ind=^J, kcub1=\ED, kcud1=\EB, kcuf1=\EC, + kcuu1=\EA, kf1=\Ep, kf2=\Eq, kf3=\Er, kf4=\Es, kf5=\Et, + kf6=\Eu, kf7=\Ev, kf8=\Ew, kf9=\Ex, khome=\EH, rmso=\Ed@, + rmul=\Ed@, sgr0=\Ed@, smso=\s\EdP, smul=\Ed`, + +# 8675, 8686, and bee from Cyrus Rahman +# (8675: changed k10, k11...k16 to k;, F1...F6 -- esr) +ha8675|harris 8675, + is2=\ES\E#\E*\Eh\Em\E?\E1\E9\E@\EX\EU, kf1=^F, + kf10=\Ed, kf11=^W, kf12=\ER, kf13=\EE, kf14=\EI, kf15=\Ei, + kf16=\Eg, kf2=^P, kf3=^N, kf4=^V, kf5=^J, kf6=^T, kf7=^H, + kf8=\177, kf9=\Ee, + use=bee, +# (8686: changed k10, k11...k16 to k;, F1...F6; fixed broken continuation +# in :is: -- esr) +ha8686|harris 8686, + is2=\ES\E#\E*\Eh\Em\E?\E1\E9\E@\EX\EU\E"*Z01\E"8F35021B7C83#\E"8F45021B7D83#\E"8F55021B7E83#\E"8F65021B7F83#\E"8F75021B7383#\E"8F851BD7#\E"8F95021B7083#\E"8FA5021B7183#\E"8FB5021B7283#, + kf1=\002\Ep\003, kf10=\Ej, kf11=\EW, kf12=\002\E{\003, + kf13=\002\E|\003, kf14=\002\E}\003, kf15=\002\E~\003, + kf16=\002\E\177\003, kf2=\002\Eq\003, kf3=\002\Er\003, + kf4=\002\Es\003, kf5=\E3, kf6=\EI, kf7=\ER, kf8=\EJ, kf9=\E(, + use=bee, + +#### Hazeltine +# +# Hazeltine appears to be out of the terminal business as of 1995. These +# guys were co-owners of the Terminal Brain Damage Hall Of Fame along with +# Harris. They have a hazeltine.com domain (but no web page there ) and can +# be reached at: +# +# Hazeltine +# 450 East Pulaski Road +# Greenlawn, New York 11740 +# +# As late as 1993, manuals for the terminal product line could still be +# purchased from: +# +# TRW Customer Service Division +# 15 Law Drive +# P.O. Box 2076 +# Fairfield, NJ 07007-2078 +# +# They're now (1998) a subsidiary of General Electric, operating under the +# marque "GEC-Marconi Hazeltine" and doing military avionics. Web page +# at <http://www.gec.com/cpd/1ncpd.htm#1.55>. +# + +# Since <cuf1> is blank, when you want to erase something you +# are out of luck. You will have to do ^L's a lot to +# redraw the screen. h1000 is untested. It doesn't work in +# vi - this terminal is too dumb for even vi. (The code is +# there but it isn't debugged for this case.) +hz1000|hazeltine 1000, + cols#80, lines#12, + bel=^G, clear=^L, cr=^M, cub1=^H, cud1=^J, cuf1=\s, home=^K, + ind=^J, +# From: <cbosg!ucbvax!pur-ee!cincy!chris> Thu Aug 20 09:09:18 1981 +hz1420|hazeltine 1420, + am, + cols#80, lines#24, + bel=^G, clear=\E^\, cr=^M, cub1=^H, cud1=^J, cuf1=^P, + cup=\E\021%p2%c%p1%{32}%+%c, cuu1=\E^L, dl1=\E^S, + ed=\E^X, el=\E^O, ht=^N, il1=\E^Z, ind=^J, rmso=\E^Y, + smso=\E^_, +# New "safe" cursor movement (11/87) from <cgs@umd5.umd.edu>. Prevents +# freakout with out-of-range args and tn3270. No hz since it needs to +# receive tildes. +hz1500|hazeltine 1500, + am, hz, + cols#80, lines#24, + bel=^G, clear=~^\, cr=^M, cub1=^H, cud1=~^K, cuf1=^P, + cup=~\021%p2%p2%?%{30}%>%t%{32}%+%;%{96}%+%c%p1%{96}%+%c, + cuu1=~^L, dl1=~\023$<40>, ed=~\030$<10>, el=~^O, home=~^R, + il1=~\032$<40>, ind=^J, kcub1=^H, kcud1=^J, kcuf1=^P, + kcuu1=~^L, khome=~^R, rmso=~^Y, smso=~^_, +# h1510 assumed to be in sane escape mode. Else use h1500. +# (h1510: early versions of this entry apparently had "<rmso=\E^_>, +# <smso=\E^Y>, but these caps were commented out in 8.3; also, +# removed incorrect and overridden ":do=^J:" -- esr) +hz1510|hazeltine 1510, + am, + cols#80, lines#24, + bel=^G, clear=\E^\, cr=^M, cub1=^H, cud1=\E^K, cuf1=^P, + cup=\E\021%p2%c%p1%c, cuu1=\E^L, dl1=\E^S, ed=\E^X, + el=\E^O, il1=\E^Z, ind=^J, +# Hazeltine 1520 +# The following switch settings are assumed for normal operation: +# FULL CR U/L_CASE ESCAPE +# FORMAT_OFF EOM_A_OFF EOM_B_OFF WRAPAROUND_ON +# Other switches may be set for operator convenience or communication +# requirements. +hz1520|Hazeltine 1520, + am, bw, msgr, + cols#80, lines#24, + bel=^G, bold=\E^_, clear=\E^\, cr=^M, cub1=^H, cud1=^J, + cuf1=^P, cup=\E\021%p2%c%p1%c, cuu1=\E^L, dl1=\E^S, + ed=\E^X, el=\E^O, home=\E^R, il1=\E^Z, ind=^J, kbs=^H, + kclr=\E^\, kcub1=^H, kcud1=\E^K, kcuf1=^P, kcuu1=\E^L, + kdl1=\E^S, ked=\E^X, kel=\E^O, khome=\E^R, kil1=\E^Z, + rmso=\E^Y, rs1=\E$\E\005\E?\E\031, sgr0=\E^Y, smso=\E^_, +# This version works with the escape switch off +# (h1520: removed incorrect and overridden ":do=^J:" -- esr) +hz1520-noesc|hazeltine 1520, + am, hz, + cols#80, lines#24, + bel=^G, clear=~^\, cr=^M, cub1=^H, cud1=~^K, cuf1=^P, + cup=~\021%p2%c%p1%c$<1>, cuu1=~^L, dl1=~^S, ed=~^X, el=~^O, + home=~^R, il1=~^Z, ind=^J, rmso=~^Y, smso=~^_, +# Note: the h1552 appears to be the first Hazeltine terminal which +# is not braindamaged. It has tildes and backprimes and everything! +# Be sure the auto lf/cr switch is set to cr. +hz1552|hazeltine 1552, + cud1=^J, dl1=\EO, il1=\EE, kf1=\EP, kf2=\EQ, kf3=\ER, lf1=blue, + lf2=red, lf3=green, + use=vt52, +hz1552-rv|hazeltine 1552 reverse video, + cud1=^J, rmso=\ET, smso=\ES, use=hz1552, +# Note: h2000 won't work well because of a clash between upper case and ~'s. +hz2000|hazeltine 2000, + am, + cols#74, lines#27, + bel=^G, clear=~\034$<6>, cub1=^H, cud1=^J, + cup=~\021%p2%c%p1%c, dl1=~\023$<6>, home=~^R, + il1=~\032$<6>, ind=^J, pad=\177, +# Date: Fri Jul 23 10:27:53 1982. Some unknown person wrote: +# I tested this termcap entry for the Hazeltine Esprit with vi. It seems +# to work ok. There is one problem though if one types a lot of garbage +# characters very fast vi seems not able to keep up and hangs while trying +# to insert. That's in insert mode while trying to insert in the middle of +# a line. It might be because the Esprit doesn't have insert char and delete +# char as a built in function. Vi has to delete to end of line and then +# redraw the rest of the line. +esprit|Hazeltine Esprit I, + am, bw, + cols#80, lines#24, + bel=^G, cbt=\E^T, clear=\E^\, cr=^M, cub1=^H, cud1=\E^K, + cuf1=^P, cup=\E\021%p2%c%p1%c, cuu1=\E^L, dl1=\E^S, + ed=\E^W, el=\E^O, home=\E^R, il1=\E^Z, ind=^J, is2=\E?, kbs=^H, + kcub1=^H, kcud1=\E^K, kcuf1=^P, kcuu1=\E^L, kf0=^B0^J, + kf1=^B1^J, kf2=^B2^J, kf3=^B3^J, kf4=^B4^J, kf5=^B5^J, + kf6=^B6^J, kf7=^B7^J, kf8=^B8^J, kf9=^B9^J, khome=\E^R, + lf0=0, lf1=1, lf2=2, lf3=3, lf4=4, lf5=5, lf6=6, lf7=7, lf8=8, lf9=9, + rmkx=\E>, rmso=\E^Y, smkx=\E<, smso=\E^_, +esprit-am|hazeltine esprit auto-margin, + am, use=esprit, +# Hazeltine Modular-1 from Cliff Shackelton <ittvax!ittral!shackelt> via BRL +# Vi it seems always wants to send a control J for "do" and it turned out +# that the terminal would work somewhat if the auto LF/CR was turned off. +# (hmod1: removed :dn=~^K: -- esr) +hmod1|Hazeltine Modular 1, + am, hz, + cols#80, lines#24, + bel=^G, cbt=~^T, clear=~^\, cr=^M, cub1=^H, cud1=~^K, cuf1=^P, + cup=~\021%p2%c%p1%c, cuu1=~^L, dl1=~^S, home=~^R, il1=~^Z, + ind=^J, kcub1=^H, kcud1=~^K, kcuf1=^P, kcuu1=~^L, khome=~^R, + rc=~^Q, rmso=~^Y, sc=~^E, sgr0=~^Y, smso=~^_, +# +# Hazeltine Executive 80 Model 30 (1554?) +# from Will Martin <control@ALMSA-1.ARPA> via BRL +# Like VT100, except for different "am" behavior. +hazel|exec80|h80|he80|Hazeltine Executive 80, + am, + cols#80, it#8, lines#24, vt#3, + bel=^G, blink=\E[5m$<2/>, bold=\E[1m$<2/>, + clear=\E[;H\E[2J$<50/>, cr=^M, csr=\E[%i%p1%d;%p2%dr, + cub1=^H, cud1=^J, cuf1=\E[C$<2/>, + cup=\E[%i%p1%d;%p2%dH$<5/>, cuu1=\E[A$<2/>, + ed=\E[J$<50/>, el=\E[K$<3/>, home=\E[H, ht=^I, + is2=\E[1;24r\E[24;1H, kbs=^H, kcub1=\EOD, kcud1=\EOB, + kcuf1=\EOC, kcuu1=\EOA, kf1=\EOP, kf2=\EOQ, kf3=\EOR, + kf4=\EOS, rc=\E8, rev=\E[7m$<2/>, + rf=/usr/share/tabset/vt100, ri=\EM$<5/>, + rmkx=\E[?1l\E>, rmso=\E[m$<2/>, rmul=\E[m$<2/>, + rs1=\E>\E[?3l\E[?4l\E[?5l\E[?7h\E[?8h, sc=\E7, + sgr0=\E[m$<2/>, smkx=\E[?1h\E=, smso=\E[7m$<2/>, + smul=\E[4m$<2/>, + +#### IBM +# + +ibm327x|line mode IBM 3270 style, + gn, + clear=^M^J, el=^M, home=^M, + +ibm3101|i3101|IBM 3101-10, + am, xon, + cols#80, lines#24, + bel=^G, clear=\EK, cr=^M, cub1=^H, cud1=^J, cuf1=\EC, + cup=\EY%p1%{32}%+%c%p2%{32}%+%c, cuu1=\EA, ed=\EJ, + el=\EI, home=\EH, hts=\E0, ind=^J, kcub1=\ED, kcud1=\EB, + kcuf1=\EC, kcuu1=\EA, nel=^M^J, tbc=\EH, +ibm3151|IBM 3151 display, + is2=\E S, rmacs=\E>B, rmcup=\E>B, rs2=\E S, s0ds=\E>B, + sgr=\E4%{64}%?%p1%t%{65}%|%;%?%p2%t%{66}%|%;%?%p3%t%{65}%|%;%?%p4%t%{68}%|%;%?%p5%t%{64}%|%;%?%p6%t%{72}%|%;%?%p7%t%{80}%|%;%c%?%p9%t\E>A%e\E>B%;, + sgr0=\E4@\E>B, smacs=\E>A, smcup=\E>B, + use=ibm3162, +# From: Mark Easter <marke@fsi-ssd.csg.ssd.fsi.com> 29 Oct 1992 +# I've commented out or translated some IBM extensions. +ibm3161|ibm3163|wy60-316X|wyse60-316X|IBM 3161/3163 display, + am, mir, msgr, + cols#80, it#8, lines#24, + acsc=j\352k\353l\354m\355n\356q\361t\364u\365v\366w\367x\370, + bel=^G, blink=\E4D, bold=\E4H, clear=\EH\EJ, cr=^M, cub1=\ED, + cud1=\EB, cuf1=\EC, cup=\EY%p1%{32}%+%c%p2%{32}%+%c, + cuu1=\EA, dch1=\EQ, dl1=\EO, ed=\EJ, el=\EI, home=\EH, ind=^J, + invis=\E4P, kbs=^H, kcbt=\E2, kclr=\EL\r, kctab=\E1, + kcub1=\ED, kcud1=\EB, kcuf1=\EC, kcuu1=\EA, kdch1=\EQ, + kdl1=\EO, ked=\EJ, kel=\EI, kend=\E2, kf1=\Ea\r, kf10=\Ej\r, + kf11=\Ek\r, kf12=\El\r, kf13=\E!a\r, kf14=\E!b\r, + kf15=\E!c\r, kf16=\E!d\r, kf17=\E!e\r, kf18=\E!f\r, + kf19=\E!g\r, kf2=\Eb\r, kf20=\E!h\r, kf21=\E!i\r, + kf22=\E!j\r, kf23=\E!k\r, kf24=\E!l\r, kf3=\Ec\r, + kf4=\Ed\r, kf5=\Ee\r, kf6=\Ef\r, kf7=\Eg\r, kf8=\Eh\r, + kf9=\Ei\r, khome=\EH, khts=\E0, kich1=\EP \010, kil1=\EN, + knp=\EI, kpp=\EL, ktbc=\E 1, mc4=^P^T, mc5=^P^R, rev=\E4A, + rmcup=\E>A, rmso=\E4@, rmul=\E4@, + sgr=\E4%{64}%?%p1%t%{65}%|%;%?%p2%t%{66}%|%;%?%p3%t%{65}%|%;%?%p4%t%{68}%|%;%?%p5%t%{64}%|%;%?%p6%t%{72}%|%;%?%p7%t%{80}%|%;%c%?%p9%t\E>A%e\E<@%;, + sgr0=\E4@\E<@, smcup=\E>A, smso=\E4A, smul=\E4B, + +ibm3161-C|IBM 3161-C NLS terminal using cartridge, + rmcup=\E>B, s0ds=\E>B, s1ds=\E>A, smcup=\E>B, + use=ibm3161, +ibm3162|IBM 3162 display, + blink=\E4$a, bold=\E4(a, il1=\EN, invis=\E40a, rev=\E4!a, + rmso=\E4>b, rmul=\E4=b, sgr0=\E4@, smso=\E4!a, smul=\E4"a, + use=ibm3161-C, + +ibm3164|i3164|IBM 3164, + msgr, + colors#8, pairs#64, + rmcup=\E!9(N\E>B, s0ds=\E>B, s1ds=\E>A, + setb=\E4 %p1%{64}%+%c, + setf=\E4%?%p1%t %p1%{32}%+%c%e!'%;@, + smcup=\E!9/N\E>B, use=ibm3161, + +ibm5151|wy60-AT|wyse60-AT|IBM 5151 Monochrome display, + am, bw, msgr, xon, + cols#80, it#8, lines#25, + acsc=j\331k\277l\332m\300n\305q\304t\303u\264v\301w\302x\263, + bel=^G, blink=\E[5m, bold=\E[1m, clear=\E[H\E[2J, cr=^M, + cub=\E[%p1%dD, cub1=^H, cud=\E[%p1%dB, cud1=^J, + cuf=\E[%p1%dC, cuf1=\E[C, cup=\E[%i%p1%d;%p2%dH, + cuu=\E[%p1%dA, cuu1=\E[A, dch1=\E[P, dl=\E[%p1%dM, + dl1=\E[M, ech=\E[%p1%dX, ed=\E[J, el=\E[K, home=\E[H, + hpa=\E[%i%p1%dG, il=\E[%p1%dL, il1=\E[L, ind=\E[S, + indn=\E[%p1%dS, invis=\E[8m, is2=\Ec, kbs=^H, kcbt=\E[Z, + kclr=\E[144q, kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C, + kcuu1=\E[A, kdch1=\E[P, ked=\E[148q, kel=\E[142q, + kend=\E[146q, kf0=\E[010q, kf1=\E[001q, kf10=\E[010q, + kf11=\E[011q, kf12=\E[012q, kf13=\E[013q, kf14=\E[014q, + kf15=\E[015q, kf16=\E[016q, kf17=\E[017q, kf18=\E[018q, + kf19=\E[019q, kf2=\E[002q, kf20=\E[020q, kf21=\E[021q, + kf22=\E[022q, kf23=\E[023q, kf24=\E[024q, kf25=\E[025q, + kf26=\E[026q, kf27=\E[027q, kf28=\E[028q, kf29=\E[029q, + kf3=\E[003q, kf30=\E[030q, kf31=\E[031q, kf32=\E[032q, + kf33=\E[033q, kf34=\E[034q, kf35=\E[035q, kf36=\E[036q, + kf4=\E[004q, kf5=\E[005q, kf6=\E[006q, kf7=\E[007q, + kf8=\E[008q, kf9=\E[009q, khome=\E[H, kich1=\E[139q, + kil1=\E[140q, kind=\E[151q, knp=\E[154q, kpp=\E[150q, + kri=\E[155q, krmir=\E[4l, rc=\E[u, rev=\E[7m, ri=\E[T, + rin=\E[%p1%dT, rmir=\E[4l, rmso=\E[m, rmul=\E[m, rs2=\Ec, + sc=\E[s, + sgr=\E[%?%p1%t;7%;%?%p2%t;4%;%?%p3%t;7%;%?%p4%t;5%;%?%p6%t;1%;%?%p7%t;8%;m, + sgr0=\E[0m, smir=\E[4h, smso=\E[7m, smul=\E[4m, + +ibmaed|IBM Experimental display, + am, eo, msgr, + cols#80, it#8, lines#52, + clear=\EH\EK, cub1=^H, cud1=\EB, cuf1=\EC, + cup=\EY%p1%{32}%+%c%p2%{32}%+%c, cuu1=\EA, dch1=\EQ, + dl1=\EO, ed=\EJ, el=\EI, flash=\EG, home=\EH, ht=^I, ich1=\EP, + il1=\EN, kbs=^H, kcub1=\ED, kcud1=\EB, kcuf1=\EC, kcuu1=\EA, + rmso=\E0, sgr0=\E0, smso=\E0, +ibm-apl|apl|IBM apl terminal simulator, + lines#25, use=dm1520, +# (ibmmono: this had an unknown `sb' boolean, I changed it to `bs'. +# Also it had ":I0=f10:" which pretty obviously should be "l0=f10" -- esr) +ibmmono|IBM workstation monochrome, + eslok, hs, + bold=\EZ, dl1=\EM, dsl=\Ej\EY8 \EI\Ek, fsl=\Ek, il1=\EL, + invis=\EF\Ef0;\Eb0;, kbs=^H, kf0=\E<, kf1=\ES, kf2=\ET, + kf3=\EU, kf4=\EV, kf5=\EW, kf6=\EP, kf7=\EQ, kf8=\ER, kf9=\EY, + khome=\EH, kich1=\0, kind=\EE, knp=\EE, kpp=\Eg, kri=\EG, + lf0=f10, rev=\Ep, ri=\EA, rmso=\Ez, rmul=\Ew, + sgr0=\Ew\Eq\Ez\EB, smso=\EZ, smul=\EW, tsl=\Ej\EY8%+ \Eo, use=ibm3101, +ibmega|IBM Enhanced Color Display, + cr=^M, cud1=^J, ht=^I, ind=^J, kbs=^H, kcub1=^H, kcud1=^J, + nel=^M^J, + use=ibmmono, +ibm5154|IBM 5154 Color display, + colors#8, pairs#64, + bold@, setab=\E[4%p1%dm, setaf=\E[3%p1%dm, use=ibm5151, +ibmega-c|ibm5154-c|IBM Enhanced Color Display with standout and underline, + rmso=\EB, rmul=\EB, smso=\EF\Ef3;, smul=\EF\Ef2;, + use=ibmmono, +ibmvga-c|IBM VGA display color termcap, + cr=^M, cud1=^J, ht=^I, ind=^J, kbs=^H, kcub1=^H, kcud1=^J, + nel=^M^J, + use=ibmega-c, +ibmvga|IBM VGA display, + cr=^M, cud1=^J, ht=^I, ind=^J, kbs=^H, kcub1=^H, kcud1=^J, + nel=^M^J, + use=ibmega, +# ibmapa* and ibmmono entries come from ACIS 4.3 distribution +rtpc|ibmapa16|IBM 6155 Extended Monochrome Graphics Display, + lines#32, + dsl=\Ej\EY@ \EI\Ek, tsl=\Ej\EY@%+ \Eo, use=ibmmono, +ibm6155|IBM 6155 Black & White display, + blink@, bold@, use=ibm5151, +# Advanced Monochrome (6153) and Color (6154) Graphics Display: +ibmapa8c|ibmapa8|IBM 6154 Advanced Graphics Display, + lines#31, + dsl=\Ej\EY? \EI\Ek, tsl=\Ej\EY?%+ \Eo, use=ibmmono, +ibmapa8c-c|ibm6154-c|IBM 6154 Advanced Color Graphics Display, + lines#31, + dim=\EF\Ef7;, dsl=\Ej\EY? \EI\Ek, tsl=\Ej\EY?%+ \Eo, use=ibmega-c, +ibm6154|IBM 6154 Color displays, + blink@, bold=\E[12m, s0ds=\E[10m, s1ds=\E[11m, s2ds=\E[12m, + sgr=\E[%?%p1%t;7%;%?%p2%t;4%;%?%p3%t;7%;%?%p4%t;5%;%?%p6%t;12%;m, + sgr0=\E[0;10m, + use=ibm5154, +ibm6153|IBM 6153 Black & White display, + blink@, bold=\E[12m, s0ds=\E[10m, s1ds=\E[11m, s2ds=\E[12m, + sgr=\E[%?%p1%t;7%;%?%p2%t;4%;%?%p3%t;7%;%?%p4%t;5%;%?%p6%t;12%;m, + sgr0=\E[0;10m, + use=ibm5151, +ibm6153-90|IBM 6153 Black & White display, + cols#90, lines#36, + blink@, bold@, use=ibm5151, +ibm6153-40|IBM 6153 Black & White display, + cols#40, lines#12, use=ibm6153-90, +ibm8512|ibm8513|IBM color VGA Terminal, + am, mir, msgr, + cols#80, it#8, lines#25, + acsc=jjkkllmmnnqqttuuvvwwxx, blink=\E[5m, bold=\E[1m, + clear=\E[H\E[2J, cub1=\E[D, cud1=^J, cuf1=\E[C, + cup=\E[%i%p1%d;%p2%dH, cuu1=\E[A, dl=\E[%p1%dM, dl1=\E[M, + ech=\E[%p1%dX, ed=\E[J, el=\E[K, home=\E[H, il=\E[%p1%dL, + il1=\E[L, is2=\Eb\E[m\017\E[?7h, kcud1=\E[B, kcuu1=\E[A, + kf0=\E[010q, kf1=\E[001q, kf2=\E[002q, kf3=\E[003q, + kf4=\E[004q, kf5=\E[005q, kf6=\E[006q, kf7=\E[007q, + kf8=\E[008q, kf9=\E[009q, khome=\E[H, rc=\E[u, rev=\E[7m, + rmacs=^O, rmam=\E[?7l, rmcup=\E[20h, rmdc=\E[4l, + rmir=\E[4l, rmso=\E[m, rmul=\E[m, + rs1=\Eb\E[m\017\E[?7h\E[H\E[J, sc=\E[s, sgr0=\E[m, + smacs=^N, smam=\E[?7h, smcup=\E[20;4l\E[?7h\Eb, + smdc=\E[4h, smir=\E[4h, smso=\E[7m, smul=\E[4m, + use=ibm8503, +hft-c|HFT with Color, + colors#8, pairs#64, + acsc=jjkkllmmnnqqttuuvvwwxx, s0ds=\E(B, s1ds=\E(0, + setab=\E[4%p1%dm, setaf=\E[3%p1%dm, sgr0=\E[0m\E(B, + use=ibm5151, +hft-c-old|HFT with Color PC850, + colors#8, pairs#64, + setab=\E[4%p1%dm, setaf=\E[3%p1%dm, use=ibm5151, +ibm-system1|system1|ibm system/1 computer, + am, xt, + cols#80, lines#24, + bel=^G, clear=^Z, cub1=^H, cuf1=^\, + cup=\005%p1%{32}%+%c%p2%{32}%+%c, cuu1=^^, home=^K, + ind=^J, +ibm5081|hft|IBM Megapel Color display, + acsc=jjkkllmmnnqqttuuvvwwxx, blink@, bold@, s0ds=\E(B, + s1ds=\E(0, sgr0=\E[0m\E(B, + use=ibm5154, +ibm5081-c|ibmmpel-c|IBM 5081 1024x1024 256/4096 Megapel enhanced color display, + eslok, hs, + lines#33, + dsl=\Ej\EYA \EI\Ek, fsl=\Ek, tsl=\Ej\EYA%+ \Eo, use=ibmega-c, +ibm8503|ibm8507|ibm8604|IBM 8503 B & W VGA display, + use=hft-c, +ibm8514|IBM 8514/a color VGA display, + eslok, hs, + dsl=\Ej\EYI \EI\Ek, fsl=\Ek, tsl=\Ej\EYI%+ \Eo, use=hft, +ibm8514-c|IBM 8514 color display with standout and underline, + eslok, hs, + lines#41, + cr=^M, cud1=^J, dsl=\Ej\EYI \EI\Ek, fsl=\Ek, ht=^I, ind=^J, + kbs=^H, kcub1=^H, kcud1=^J, nel=^M^J, tsl=\Ej\EYI%+ \Eo, + use=ibmega-c, + +# +# AIX entries. IBM ships these with AIX 3.2.5. +# AIX extension caps are commented out, +# except for box1 which has been translated to an <acsc> string. +# +aixterm|IBM Aixterm Terminal Eemulator, + eslok, hs, + acsc=jjkkllmmnnqqttuuvvwwxx, bold=\E[1m, dsl=\E[?E, + fsl=\E[?F, ri@, s0ds=\E(B, s1ds=\E(0, + sgr=\E[%?%p1%t;7%;%?%p2%t;4%;%?%p3%t;7%;%?%p4%t;5%;%?%p6%t;1%;%?%p7%t;8%;m, + sgr0=\E[0;10m\E(B, tsl=\E[?%p1%dT, + use=ibm6154, +aixterm-m|IBM AIXterm Monochrome Terminal Emulator, + eslok, hs, + acsc=jjkkllmmnnqqttuuvvwwxx, bold=\E[1m, dsl=\E[?E, + fsl=\E[?F, ri@, s0ds=\E(B, s1ds=\E(0, + sgr=\E[%?%p1%t;7%;%?%p2%t;4%;%?%p3%t;7%;%?%p4%t;5%;%?%p6%t;1%;m, + sgr0=\E[0;10m\E(B, tsl=\E[?%p1%dT, + use=ibm6153, +aixterm-m-old|old IBM AIXterm Monochrome Terminal Emulator, + eslok, hs, + bold=\E[1m, dsl=\E[?E, fsl=\E[?F, ri@, + sgr=\E[%?%p1%t;7%;%?%p2%t;4%;%?%p3%t;7%;%?%p4%t;5%;%?%p6%t;1%;m, + tsl=\E[?%p1%dT, + use=ibm6153, +jaixterm|IBM Kanji Aixterm Terminal Eemulator, + acsc@, use=aixterm, +jaixterm-m|IBM Kanji AIXterm Monochrome Terminal Emulator, + acsc@, + use=aixterm-m, + +#### Infoton/General Terminal Corp. +# + +# gt100 sounds like something DEC would come out with. Let's hope they don't. +i100|gt100|gt100a|General Terminal 100A (formerly Infoton 100), + am, + cols#80, lines#24, + bel=^G, clear=^L, cr=^M, cub1=^H, cud1=^J, cuf1=\EC, + cup=\Ef%p2%{32}%+%c%p1%{32}%+%c, cuu1=\EA, dl1=\EM, + ed=\EJ, el=\EK, flash=\Eb$<200/>\Ea, home=\EH, il1=\EL, + ind=^J, rmso=\Ea, smso=\Eb, +i400|infoton 400, + am, + cols#80, lines#25, + bel=^G, clear=\E[2J, cr=^M, cub1=^H, cud1=^J, cuf1=\E[C, + cup=%i\E[%p1%3d;%p2%3dH, cuu1=\E[A, + dch1=\E[4h\E[2Q\E[P\E[4l\E[0Q, dl1=\E[M, el=\E[N, + il1=\E[L, ind=^J, rmir=\E[4l\E[0Q, smir=\E[4h\E[2Q, +# (addrinfo: removed obsolete ":bc=^Z:" -- esr) +addrinfo, + am, + cols#80, lines#24, + bel=^G, clear=^L, cr=^M, cub1=^Z, cud1=^J, cuf1=^Y, + cup=\037%p1%{1}%-%c%p2%{1}%-%c, cuu1=^\, ed=^K, home=^H, + ind=^J, ll=^H^\, +# (infoton: used to have the no-ops <lh#0>, <lw#0>, <nlab#0> -- esr) +infoton, + am, + cols#80, lines#24, + bel=^G, clear=^L, cr=^M, cub1=^Z, cud1=^J, cuf1=^Y, cuu1=^\, + ed=^K, ind=^J, ll=^H^\, + +# The ICL6402 was actually the Kokusai Display System 6402. +# The 6404 was the KDS7372 (color version of the 6402). +# +# ICL6404 control codes follow: +# +#code function +#~~~~~~~~~~~ ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ +#ctrl-A set SOM position at cursor position +#ctrl-G Bell +#ctrl-H Backspace +#ctrl-I Horiz tab +#ctrl-J Linefeed +#ctrl-K Cursor up +#ctrl-L Cursor right +#ctrl-M Carriage return +#ctrl-N Disable xon/xoff to host +#ctrl-O Enable xon/xoff to host +#ctrl-R Enable bidirectional mode +#ctrl-T Disable bidirectional mode +#ctrl-V Cursor down +#ctrl-Z Clear unprotected data to insert char +#ctrl-^ Cursor home +#ctrl-_ Newline +# +#ESC lead-in char for multiple character command +# +#ESC space R execute power on sequence +#ESC ! p1 p2 define scroll region: +# p1 = scroll top line: 20h - 37h +# p1 = scroll bottom line: 20h - 37h +#ESC " unlock keyboard +#ESC # lock keyboard +#ESC $ Semi-graphics mode on +#ESC % Semi-graphics mode off +#ESC & protect mode on +#ESC ' protect mode off +#ESC ( write protect mode off (full intensity) +#ESC ) write protect mode on (half intensity) +# +#ESC * clear screen +#ESC + clear unprotected data to insert char +#ESC , clear unprotected data to half intensity spaces +#ESC - p1 p2 p3 p4 address cursor to page, row, column: +# p1 = page number 0 - 3 +# p2 = row 20h - 7fh +# p3 = column (lo) 20h - 7fh +# p4 = column (hi) 20h - 21h (only 132 col) +#ESC . p1 set cursor style: +# p1 = 0 invisible cursor +# p1 = 1 block blinking cursor +# p1 = 2 block steady cursor +# p1 = 3 underline blinking cursor +# p1 = 4 underline steady cursor +#ESC / transmit cursor location (page, row, column) +#ESC 0 p1 p2 p3 p4 program edit key: +# p1 = edit key code: '@'-'S', '`'-'s' +# p2 p3 p4 = program data (3 bytes) +# +#ESC 1 set tab +#ESC 2 clear tab at cursor +#ESC 3 clear all tabs +#ESC 4 send unprotect line to cursor +#ESC 5 send unprotect page to cursor +#ESC 6 send line to cursor +#ESC 7 send page to cursor +#ESC 8 n set scroll mode: +# n = 0 set jump scroll +# n = 1 set smooth scroll +#ESC 9 n control display: +# n = 0 display off +# n = 1 display on +#ESC : clear unprotected data to null +#ESC ; clear unprotected data to insert char +# +#ESC < keyclick on +#ESC = p1 p2 address cursor to row, column +# p1 = row 20h - 7fh +# p2 = column (lo) 20h - 7fh +# p3 = column (hi) 20h - 21h (only 132 col) +#ESC > keyclick off +#ESC ? transmit cursor location (row, column) +# +#ESC @ copy print mode on +#ESC A copy print mode off +#ESC B block mode on +#ESC C block mode off (conversation mode) +#ESC D F set full duplex +#ESC D H set half duplex +#ESC E line insert +#ESC F p1 p2 set page colour (p1 = f/grnd, p2 = b/grnd) +# 0 = black, 1 = red, 2 = green, 3 = yellow +# 4 = blue, 5 = magenta, 6 = cyan, 7 = white +#ESC G n set serial field attribute (n = 30h - 3Fh) +#ESC H n full graphics mode: +# n = 0 exit full graphics mode +# n = 1 enter full graphics mode +#ESC I back tab +#ESC J back page +#ESC K forward page +# +#ESC L unformatted page print +#ESC M L move window left (132 col mode only) +#ESC M R move window right (132 col mode only) +#ESC N set page edit (clear line edit) +#ESC O set line edit (clear page edit) +#ESC P formatted page print +#ESC Q character insert +#ESC R line delete +#ESC S send message unprotected only +#ESC T erase line to insert char +#ESC U set monitor mode (see ESC X, ESC u) +# +#ESC V n select video attribute mode: +# n = 0 serial field attribute mode +# n = 1 parallel character attribute mode +#ESC V 2 n define line attribute: +# n = 0 single width single height +# n = 1 single width double height +# n = 2 double width single height +# n = 3 double width double height +#ESC V 3 n select character font: +# n = 0 system font +# n = 1 user defined font +#ESC V 4 n select screen mode: +# n = 0 page screen mode +# n = 1 virtual screen mode +#ESC V 5 n control mouse mode: +# n = 0 disable mouse +# n = 1 enable sample mode +# n = 2 send mouse information +# n = 3 enable request mode +#ESC W character delete +#ESC X clear monitor mode (see ESC U, ESC u) +#ESC Y erase page to insert char +# +#ESC Z n send user/status line: +# n = 0 send user line +# n = 1 send status line +# n = 2 send terminal ID +#ESC [ p1 p2 p3 set character attribute (parallel char mode): +# p1: 0 = normal +# 1 = blank +# 2 = blink +# 3 = blink blank (= blank) +# 4 = reverse +# 5 = reverse blank +# 6 = reverse blink +# 7 = reverse blink blank (= reverse blank) +# 8 = underline +# 9 = underline blank +# : = underline blink +# ; = underline blink blank +# < = reverse underline +# = = reverse underline blank +# > = reverse underline blink +# ? = reverse underline blink blank +# p2, p3: f/grnd, b/grnd colour +# (see ESC F for colours) +# use ZZ for mono, eg. +# ESC [ 0 Z Z for normal +# ESC [ 4 Z Z for inverse etc. +# +#ESC \ n set page size: +# n = 1 24 lines/page +# n = 2 48 lines/page +# n = 3 72 lines/page +# n = 4 96 lines/page +#ESC ] n set Wordstar mode: +# n = 0 normal (KDS7372) mode +# n = 1 Wordstar mode +# +#ESC b set foreground colour screen +# +#ESC c n enter self-test mode: +# n = 0 exit self test mode +# n = 1 ROM test +# n = 2 RAM test +# n = 3 NVRAM test +# n = 4 screen display test +# n = 5 main/printer port test +# n = 6 mouse port test +# n = 7 graphics board test +# n = 8 graphics memory test +# n = 9 display all 'E' +# n = : display all 'H' +#ESC d set background colour screen +# +#ESC e n program insert char (n = insert char) +#ESC f text CR load user status line with 'text' +# +#ESC g display user status line on 25th line +#ESC h display system status line on 25th line +#ESC i tab +#ESC j reverse linefeed +#ESC k n duplex/local edit mode: +# n = 0 duplex edit mode +# n = 1 local edit mode +#ESC l n select virtual screen: +# n = 0 screen 1 +# n = 1 screen 2 +#ESC m save current config to NVRAM +#ESC n p1 select display screen: +# p1 = 0 screen 1 +# p1 = 1 screen 2 +# p1 = 2 screen 3 +# p1 = 3 screen 4 +#ESC o p1 p2 set characters/line and attribute: +# p1 = 0 80 chars/line +# +#ESC o p1 p2 set characters/line and attribute: +# p1 = 0 80 chars/line +# p1 = 1 132 chars/line +# p2 = 0 single width single height +# p2 = 1 single width double height +# p2 = 2 double width single height +# p2 = 3 double width double height +# +#ESC q insert mode on +#ESC r edit mode on +#ESC s send message all +#ESC t erase line to null +#ESC u clear monitor mode (see ESC U, ESC X) +#ESC v autopage mode on +#ESC w autopage mode off +#ESC x p1 p2 p3 define delimiter code... +#ESC y erase page to null +# +#ESC z 2 p1 p2 p3 p4 draw quadrangle: +# p1 = starting row +# p2 = starting column +# p3 = end row +# p4 = end column +# +#ESC { p1 p2 p3 p4 configure main port +# (baud, stop bits, parity, word length) +# +#ESC | p1 p2 text Ctrl-Y program function key with 'text': +# p1 = function key code: +# '1' - ';' normal f1- f11 +# '<' - 'F' shifted f1 - f11 +# p2 = program mode: +# 1 = FDX +# 2 = LOC +# 3 = HDX +# Ctrl-Y = terminator +# (use Ctrl-P to escape ^P, ^Y ) +# +#ESC } p1 p2 p3 p4 configure printer port +# (baud, stop bits, parity, word length) +#ESC ~ send system status +# +# Codes and info from Peter Disdale <pete@pdlmail.demon.co.uk> 12 May 1997 +# +# Entry is by esr going solely on above information and is UNTESTED. +# This actually looks a lot like a Televideo 9xx. +# This entry uses page 0 and is monochrome; I'm not brave enough to try +# to make color work without a test terminal. The <am> capability is a guess. +# The initialization string sets conversation mode, blinking underline cursor, +# full duplex, parallel attribute mode, display user status line, white +# foreground, black background, normal highlight. +# +icl6404|kds7372|icl6402|kds6402|ICL 6404 aka Kokusai Display Systems 7372, + am, hs, + cols#80, lines#24, + bel=^G, blink=\E[2ZZ, cbt=\EI, civis=\E.0, clear=\E*, + cnorm=\E.3, cr=^M, + csr=\E!%+%p1%{32}%+%p2%{32} cud1=\026, cuf1=^L, + cup=\E=%p1%{32}%+%c%p2%{80}%m%{32}%+%c%p2%{80}%>%{32}%+%c, + cuu1=^K, cvvis=\E.1, dch=\EW, dl1=\ER, home=^^, ht=^I, hts=\E1, + il1=\EE, invis=\E[1ZZ, is1=\EC\E.3\EDF\EV1\Eg\E[0ZZ, + nel=^_, rev=\E[4ZZ, rmir=\Er, + rmso=\E[%gh%{4}%^%Ph%gh%dZZ, + rmul=\E[%gh%{8}%^%Ph%gh%dZZ, rs2=\Eo1, + sgr=\E[%{0}%?%p1%t%{4}%|%;%?%p2%t%{8}%|%;%?%p3%t%{4}%|%;%?%p4%t%{2}%|%;%?%p7%t%{1}%|%;ZZ, + sgr0=\E[0ZZ, smir=\Eq, smso=\E[8ZZ, smul=\E[8ZZ, tbc=\E3, +icl6404-w|kds7372-w|ICL 6404 aka Kokusai Display Systems 7372 132 cols, + rs2=\Eo1, + use=icl6404, + +#### Interactive Systems Corp +# +# ISC used to sell OEMed and customized hardware to support ISC UNIX. +# ISC UNIX still exists in 1995, but ISC itself is no more; they got +# bought out by Sun. +# + +# From: <cithep!eric> Wed Sep 16 08:06:44 1981 +# (intext: removed obsolete ":ma=^K^P^R^L^L ::bc=^_:", also the +# ":le=^_:" later overridden -- esr) +intext|Interactive Systems Corporation modified owl 1200, + am, + cols#80, it#8, lines#24, xmc#1, + bel=^G, cbt=^Y, clear=\014$<132>, cr=^M, cub1=^H, cud1=^J, + cuf1=^^, cup=\017%p1%{32}%+%c%p2%{32}%+%c, cuu1=^\, + dch1=\022$<5.5*>, dl1=\021$<5.5*>, ed=\026J$<5.5*>, + el=^Kp^R, ht=^I, il1=\020$<5.5*>, ind=^J, ip=$<5.5*>, kbs=^H, + kcub1=^_, kcud1=^J, kcuf1=^^, kcuu1=^\, kf0=^VJ\r, kf1=^VA\r, + kf2=^VB\r, kf3=^VC\r, kf4=^VD\r, kf5=^VE\r, kf6=^VF\r, + kf7=^VG\r, kf8=^VH\r, kf9=^VI\r, khome=^Z, rmir=^V<, + rmkx=^V9, rmso=^V#\s, smir=^V;, smkx=\036\:\264\026%, + smso=^V$\,, +intext2|intextii|INTERACTIVE modified owl 1251, + am, bw, ul, + cols#80, lines#24, xmc#0, + bel=^G, cbt=\E[Z, clear=\E[H\E[2J, cr=^M, cud1=\E[B, + cuf1=\E[C, cup=\E[%i%p1%d;%p2%dH, cuu1=\E[A, dch1=\E[P, + dl1=\E[M, ed=\E[J, el=\E[K, + flash=\E[;;;;;;;;;2;;u$<200/>\E[;;;;;;;;;1;;u, + hpa=\E[%p1%{1}%+%dG, ht=^I, ich1=\E[@, il1=\E[L, ind=\E[S, + kbs=^H, kcub1=\ED\r, kcud1=\EB\r, kcuf1=\EC\r, kcuu1=\EA\r, + kf0=\E@\r, kf1=\EP\r, kf2=\EQ\r, kf3=\ES\r, kf4=\ET\r, + kf5=\EU\r, kf6=\EV\r, kf7=\EW\r, kf8=\EX\r, kf9=\EY\r, + khome=\ER\r, lf0=REFRSH, lf1=DEL CH, lf2=TABSET, lf3=GOTO, + lf4=+PAGE, lf5=+SRCH, lf6=-PAGE, lf7=-SRCH, lf8=LEFT, + lf9=RIGHT, ri=\E[T, rmso=\E[2 D, rmul=\E[2 D, smso=\E[6 D, + smul=\E[18 D, + +#### Kimtron (abm, kt) +# +# Kimtron seems to be history, but as March 1998 these people are still +# offering repair services for Kimtron equipment: +# +# Com/Pair Monitor Service +# 1105 N. Cliff Ave. +# Sioux Falls, South Dakota 57103 +# +# WATS voice: 1-800/398-4946 +# POTS fax: +1 605/338-8709 +# POTS voice: +1 605/338-9650 +# Email: <compair@sd.cybernex.net> +# Internet/Web: <http://www.com-pair.com> +# +# Kimtron entries include (undocumented) codes for: enter dim mode, +# enter bold mode, enter reverse mode, turn off all attributes. +# + +# Kimtron ABM 85 added by Dual Systems +# (abm85: removed duplicated ":kd=^J:" -- esr) +abm85|Kimtron ABM 85, + am, bw, msgr, + cols#80, it#8, lines#24, xmc#1, + cbt=\EI, clear=\E*, cub1=^H, cud1=^J, cuf1=^L, + cup=\E=%p1%{32}%+%c%p2%{32}%+%c, cuu1=^K, dch1=\EW, + dl1=\ER, ed=\Ey, el=\Et, ht=^I, + if=/usr/share/tabset/stdcrt, il1=\EE, + is2=\EC\EX\Eg\En\E%\Er\E(\Ek\Em\Eq, kbs=^H, kcub1=^H, + kcud1=^J, kcuf1=^L, kcuu1=^K, khome=^^, rmir=\Er, rmso=\Ek, + rmul=\Em, smir=\EQ, smso=\Ej, smul=\El, +# Kimtron ABM 85H added by Dual Systems. +# Some notes about the abm85h entries: +# 1) there are several firmware revs of 85H in the world. Use abm85h-old for +# firmware revs prior to SP51 +# 2) Make sure to use abm85h entry if the terminal is in 85h mode and the +# abm85e entry if it is in tvi920 emulation mode. They are incompatible +# in some places and NOT software settable i.e., <is2> can't fix it) +# 3) In 85h mode, the arrow keys and special functions transmit when +# the terminal is in dup-edit, and work only locally in local-edit. +# Vi won't swallow `del char' for instance, but <smcup> turns on +# dup-edit anyway so that the arrow keys will work right. If the +# arrow keys don't work the way you like, change <smcup>, <rmcup>, and +# <is2>. Note that 920E mode does not have software commands to toggle +# between dup and local edit, so you get whatever was set last on the +# terminal. +# 4) <flash> attribute is nice, but seems too slow to work correctly +# (\Eb<pad>\Ed) +# 5) Make sure `hidden' attributes are selected. If `embedded' attributes +# are selected, the <xmc@> entry should be removed. +# 6) auto new-line should be on (selectable from setup mode only) +# +# From: Erik Fair <fair@ucbarpa> Sun Oct 27 07:21:05 1985 +abm85h|Kimtron ABM 85H native mode, + hs, + xmc@, + bel=^G, cnorm=\E.4, cvvis=\E.2, dim=\E), dsl=\Ee, flash@, + fsl=^M, invis@, + is2=\EC\EN\EX\024\016\EA\Ea\E%\E9\Ee\Er\En\E"\E}\E'\E(\Ef\r\EG0\Ed\E.4\El, + kcud1=^V, sgr0=\E(\EG0, smir=\EZ, tsl=\Eg\Ef, + use=adm+sgr, use=abm85, +abm85e|Kimtron ABM 85H in 920E mode, + xmc@, + bel=^G, dim=\E), flash@, + is2=\EC\EX\EA\E%\E9\Ee\Er\En\E"\E}\E'\E(\Ef\r\Ek\Eq\Em, + rev=\Ej, sgr0=\E(\Ek, smir=\EZ, + use=abm85, +abm85h-old|oabm85h|o85h|Kimtron ABM 85H with old firmware rev., + xmc@, + bel=^G, dim=\E), + is2=\E}\EC\EX\Ee\En\E%\Er\E(\Ek\Em\Eq\Ed\ET\EC\E9\EF, + rev=\Ej, sgr0=\E(\Ek, smir=\EZ, + use=abm85, +# From: <malman@bbn-vax.arpa> +# (kt7: removed obsolete :ma=^V^J^L :" -- esr) +kt7|kimtron model kt-7, + am, + cols#80, it#8, lines#24, + cbt=\EI, clear=^Z, cub1=^H, cud1=^V, cuf1=^L, + cup=\E=%p1%{32}%+%c%p2%{32}%+%c, cuu1=^K, dch1=\EW, + dl1=\ER, ed=\EY, el=\ET, fsl=\Eg, home=^^, ht=^I, ich1=\EQ, + if=/usr/share/tabset/stdcrt, il1=\EE, invis@, is2=\El\E", + kbs=^H, kcbt=\EI, kclr=^Z, kcub1=^H, kcud1=^V, kcuf1=^L, + kcuu1=^K, kdch1=\EW, kdl1=\ER, ked=\EY, kel=\ET, kf0=^AI\r, + kf1=^A@\r, kf2=^AA\r, kf3=^AB\r, kf4=^AC\r, kf5=^AD\r, + kf6=^AE\r, kf7=^AF\r, kf8=^AG\r, kf9=^AH\r, khome=^^, + kich1=\EQ, kil1=\EE, tsl=\Ef, + use=adm+sgr, +# Renamed TB=^I to :ta:, BE=^G to :bl:, BS=^H to :kb:, N to :kS: (based on the +# other kt7 entry and the adjacent key capabilities). Removed EE which is +# identical to :mh:. Removed :ES=\EGD: which is some kind of highlight +# but we can't figure out what. +kt7ix|kimtron model kt-7 or 70 in IX mode, + am, bw, + cols#80, it#8, lines#25, + acsc=jYk?lZm@nEqDt4uCvAwBx3, bel=^G, blink=\EG2, cbt=\EI, + civis=\E.0, clear=\E*, cnorm=\E.3, cr=^M, cub1=^H, cud1=^V, + cuf1=^L, cup=\E=%p1%{32}%+%c%p2%{32}%+%c, cuu1=^K, + dch1=\EW, dim=\EG@, dl1=\ER, dsl=\Ef\r, ed=\EY, el=\ET, fsl=^M, + home=^^, ht=^I, ich1=\EQ, il1=\EE, ind=^J, + is2=\EG0\E s\017\E~, kbs=^H, kcbt=\EI, kclr=\E*, + kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A, kdl1=\ER, + ked=\EY, kel=\ET, kend=\EY, kf0=^AI\r, kf1=^A@\r, kf2=^AA\r, + kf3=^AB\r, kf4=^AC\r, kf5=^AD\r, kf6=^AE\r, kf7=^AF\r, + kf8=^AG\r, kf9=^AH\r, khome=^^, kich1=\EQ, kil1=\EE, knp=\EJ, + nel=^M^J, pulse=\EK, rmacs=\E%, rmir=, rmso=\EG0, rmul=\EG0, + sgr0=\EG0, smacs=\E$, smir=, smso=\EG4, smul=\EG8, tsl=\Ef, + +#### Microdata/MDIS +# +# This was a line of terminals made by McDonnell-Douglas Information Systems. +# These entries come direct from MDIS documentation. I have edited them only +# to move primary names of the form p[0-9] * to aliases, and to comment out +# <rmacs>/<smacs> in a couple of entries without <acsc> strings. I have +# also removed the change history; the last version indicates this is +# version 4.3 by A.Barkus, September 1990 (earliest entry is October 1989). +# + +# McDonnell Information Systems Terminal Family History +# ========================================= +# +# Prism-1, Prism-2 and P99: +# Ancient Microdata and CMC terminals, vaguely like Adds Regent 25. +# +# Prism-4 and Prism-5: +# Slightly less ancient range of Microdata terminals. Follow-on from +# Prism-2, but with many enhancements. P5 has eight display pages. +# +# Prism-6: +# A special terminal for use with library systems, primarily in Germany. +# Limited numbers. Similar functionality to P5 (except attributes?). +# +# Prism-7, Prism-8 and Prism-9: +# More recent range of MDIS terminals, in which P7 and P8 +# replace the P4 & P5, with added functionality, and P9 is the flagship. +# The P9 has two emulation modes - P8 and ANSI - and includes a +# large number of the DEC VT220 control sequences. Both +# P8 and P9 support 80c/24ln/8pg and 132cl/24li/4pg formats. +# +# Prism-12 and Prism-14: +# Latest range, functionally very similar to the P9. The P14 has a +# black-on-white overscanning screen. +# +# The terminfo definitions given here are: +# +# p2 - Prism-2 (or Prism-1 or P99). +# +# p4 - Prism-4 (and older P7s & P8s). +# p5 - Prism-5 (or Prism-6). +# +# p7 - Prism-7. +# p8 - Prism-8 (in national or multinational mode). +# p8-w - 132 column version of p8. +# p9 - Prism-9 in ANSI mode. +# p9-w - 132 column version of p9. +# p9-8 - Prism-9 in Prism-8 emulation mode. +# p9-8-w - As p9-8, but with 132 columns. +# +# p12 - Prism-12 in ANSI mode. +# p12-w - 132 column version of p12. +# p12-m - Prism-12 in MDC emulation mode. +# p12-m-w - As p12-m, but with 132 columns. +# p14 - Prism-14 in ANSI mode. +# p14-w - 132 column version of p14. +# p14-m - Prism-14 in MDC emulation mode. +# p14-m-w - As p14-m, but with 132 columns. +# +# p2: Prism-2 +# ----------- +# +# Includes Prism-1 and basic P99 without SP or MP loaded. +# The simplest form of Prism-type terminal. +# Basic cursor movement and clearing operations only. +# No video attributes. +# Notes: +# Horizontal cursor qualifiers of NUL, XON and XOFF are mapped to the next +# value up, followed by backspace. +# +prism2|MDC Prism-2, + am, bw, msgr, + cols#80, lines#24, + bel=^G, clear=\014$<20>, cr=^M, cub1=^H, cud1=^J, cuf1=^F, + cup=\013%p1%{32}%+%c\020%p2%{10}%/%{16}%*%p2%{10}%m%+%Pc%?%{17}%gc%=%{19}%gc%=%|%gc%!%|%t%{1}%gc%+%c%{8}%e%gc%;%c, + cuu1=^Z, ed=\EJ, el=\EK, home=^A, + hpa=\020%p1%{10}%/%{16}%*%p1%{10}%m%+%Pc%?%{17}%gc%=%{19}%gc%=%|%gc%!%|%t%{1}%gc%+%c%{8}%e%gc%;%c, + ind=^J, kbs=^H, khome=^A, vpa=\013%p1%{32}%+%c, + +# p4: Prism-4 +# ----------- +# +# Includes early versions of P7 & P8. +# Basic family definition for most Prisms (except P2 and P9 ANSI). +# Notes: +# Horizontal cursor qualifiers of NUL, XON and XOFF are mapped to the next +# value up, followed by backspace. +# Cursor key definitions removed because they interfere with vi and csh keys. +# +prism4|p4|P4|MDC Prism-4, + am, bw, hs, mc5i, msgr, + cols#80, lines#24, wsl#72, xmc#1, + bel=^G, blink=^CB, civis=^]\344, clear=\014$<20>, + cnorm=^]\342, cr=^M, cub1=^H, cud1=^J, cuf1=^F, + cup=\013%p1%{32}%+%c\020%p2%{10}%/%{16}%*%p2%{10}%m%+%Pc%?%{17}%gc%=%{19}%gc%=%|%gc%!%|%t%{1}%gc%+%c%{8}%e%gc%;%c, + cuu1=^Z, dim=^CA, dsl=\035\343\035\345, ed=\EJ, el=\EK, + fsl=^]\345, home=^A, + hpa=\020%p1%{10}%/%{16}%*%p1%{10}%m%+%Pc%?%{17}%gc%=%{19}%gc%=%|%gc%!%|%t%{1}%gc%+%c%{8}%e%gc%;%c, + ind=^J, invis=^CH, kbs=^H, khome=^A, mc0=\EU, mc4=\ET, mc5=\ER, + rev=^CD, rmso=^C\s, rmul=^C\s, + sgr=\003%{64}%?%p1%p3%|%t%{4}%+%;%?%p2%t%{16}%+%;%?%p4%t%{2}%+%;%?%p5%t%{1}%+%;%?%p7%t%{8}%+%;%c%?%p9%t\016%e\017%;, + sgr0=^C\s, smso=^CD, smul=^CP, tsl=^]\343, + vpa=\013%p1%{32}%+%c, + +# p5: Prism-5 +# ----------- +# +# Same definition as p4. Includes Prism-6 (not tested!). +# Does not use any multi-page features. +# +prism5|p5|P5|MDC Prism-5, + use=p4, + +# p7: Prism-7 +# ----------- +# +# Similar definition to p4. Uses ANSI cursor motion to avoid network problems. +# Notes: +# Use p4 for very early models of P7. +# Rev-index removed; can't send nulls to terminal in 8-bit modes. +# +prism7|p7|P7|MDC Prism-7, + cup=\E[%i%p1%d;%p2%dH, hpa@, vpa@, use=p4, + +# p8: Prism-8 +# ----------- +# +# Similar definition to p7. Uses ANSI cursor motion to avoid network problems. +# Supports national and multinational character sets. +# Notes: +# Alternate char set operations only work in multinational mode. +# Use p4 for very early models of P8. +# Rev-index removed; can't send nulls to terminal in 8-bit modes. +# (esr: commented out <smacs>/<rmacs> because there's no <acsc>) +# +prism8|p8|P8|MDC Prism-8, + cup=\E[%i%p1%d;%p2%dH, hpa=\E[%i%p1%d`, is2=\E[<12h, + vpa=\E[%i%p1%dd, + use=p4, + +# p8-w: Prism-8 in 132 column mode +# -------------------------------- +# +# 'Wide' version of p8. +# Notes: +# Rev-index removed; can't send nulls to terminal in 8-bit modes. +# +prism8-w|p8-w|P8-W|MDC Prism-8 in 132 column mode, + cols#132, + is2=\E[<12h\E[<14h, use=p8, + +# p9: Prism-9 in ANSI mode +# ------------------------- +# +# The "flagship" model of this generation of terminals. +# ANSI X3.64 (ISO 6429) standard sequences, plus many DEC VT220 ones. +# Notes: +# Tabs only reset by "reset". Otherwise assumes default (8 cols). +# Fixes to deal with terminal firmware bugs: +# . 'ri' uses insert-line since rev index doesn't always +# . 'sgr0' has extra '0' since esc[m fails +# . 'fsl' & 'dsl' use illegal char since cr is actioned wrong on line 25 +# Not covered in the current definition: +# . Labels +# . Programming Fn keys +# . Graphic characters (defaults correctly to vt100) +# . Padding values (sets xon) +# (esr: commented out <smacs>/<rmacs> because there's no <acsc>) +# +prism9|p9|P9|MDC Prism-9 in ANSII mode, + am, bw, hs, mc5i, msgr, xenl, xon, + cols#80, it#8, lines#24, vt#3, wsl#72, + bel=^G, blink=\E[5m, bold=\E[1m, cbt=\E[Z, civis=\E[<4l, + clear=^L, cnorm=\E[<4h, cr=^M, csr=\E[%i%p1%d;%p2%d%%v, + cub=\E[%p1%dD, cub1=^H, cud=\E[%p1%dB, cud1=^J, + cuf=\E[%p1%dC, cuf1=\E[C, cup=\E[%i%p1%d;%p2%dH, + cuu=\E[%p1%dA, cuu1=\E[A, dch=\E[%p1%dP, dch1=\E[P, + dl=\E[%p1%dM, dl1=\E[M, dsl=\E[%}\024, ech=\E[%p1%dX, + ed=\E[J$<10>, el=\E[K, fsl=^T, home=\E[H, hpa=\E[%i%p1%d`, + ht=^I, hts=\EH, il=\E[%p1%dL, il1=\E[L, ind=^J, + is2=\E[&p\E[<12l\E F, kbs=^H, kclr=^L, kcub1=\E[D, + kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A, kf1=\E[11~, + kf10=\E[21~, kf11=\E[23~, kf12=\E[24~, kf13=\E[25~, + kf14=\E[26~, kf15=\E[28~, kf16=\E[29~, kf17=\E[31~, + kf18=\E[32~, kf2=\E[12~, kf3=\E[13~, kf4=\E[14~, + kf5=\E[15~, kf6=\E[17~, kf7=\E[18~, kf8=\E[19~, kf9=\E[20~, + khome=\E[H, mc0=\E[i, mc4=\E[4i, mc5=\E[5i, nel=^M^J, + prot=\E[32%{, rc=\E[%z, rep=\E[%p2%db%p1%c, rev=\E[7m, + ri=\E[L, rmir=\E[4l, rmso=\E[27m, rmul=\E[24m, + rs2=\E[&p\E[<12l\E F\E[3g\E[9;17;25;33;41;49;57;65;73 N, + sc=\E[%y, + sgr=\E[%{0}%?%p1%p3%|%t%{4}%+%;%?%p2%t%{2}%+%;%?%p4%t%{1}%+%;%?%p6%t%{8}%+%;%?%p8%t%{32}%+%;%d%%{%?%p9%t\016%e\017%;, + sgr0=\E[0m, smir=\E[4h, smso=\E[7m, smul=\E[4m, tbc=\E[2g, + tsl=\E[%i%p1%d%%}, vpa=\E[%i%p1%dd, + +# p9-w: Prism-9 in 132 column mode +# -------------------------------- +# +# 'Wide' version of p9. +# +prism9-w|p9-w|P9-W|MDC Prism-9 in 132 column mode, + cols#132, + is2=\E[&p\E[<12l\E F\E[<14h, + rs2=\E[&p\E[<12l\E F\E[<14h, use=p9, + +# p9-8: Prism-9 in P8 mode +# ------------------------ +# +# P9 terminal in P8 emulation mode. +# Similar to p8 definition. +# Insertion and deletion operations possible. +# +prism9-8|p9-8|P9-8|MDC Prism-9 in P8 mode, + dch=\E[%p1%dP, dch1=\E[P, dl=\E[%p1%dM, dl1=\E[M, + ich=\E[%p1%d@, ich1=\E[@, il=\E[%p1%dL, il1=\E[L, use=p8, + +# p9-8-w: Prism-9 in P8 and 132 column modes +# ------------------------------------------ +# +# P9 terminal in P8 emulation mode and 132 column mode. +# +prism9-8-w|p9-8-w|P9-8-W|MDC Prism-9 in Prism 8 emulation and 132 column mode, + dch=\E[%p1%dP, dch1=\E[P, dl=\E[%p1%dM, dl1=\E[M, + ich=\E[%p1%d@, ich1=\E[@, il=\E[%p1%dL, il1=\E[L, use=p8-w, + +# p12: Prism-12 in ANSI mode +# --------------------------- +# +# See p9 definition. +# +prism12|p12|P12|MDC Prism-12 in ANSI mode, + use=p9, + +# p12-w: Prism-12 in 132 column mode +# ---------------------------------- +# +# 'Wide' version of p12. +# +prism12-w|p12-w|P12-W|MDC Prism-12 in 132 column mode, + use=p9-w, + +# p12-m: Prism-12 in MDC emulation mode +# ------------------------------------- +# +# P12 terminal in MDC emulation mode. +# Similar to p8 definition. +# Insertion and deletion operations possible. +# +prism12-m|p12-m|P12-M|MDC Prism-12 in MDC emulation mode, + use=p9-8, + +# p12-m-w: Prism-12 in MDC emulation and 132 column modes +# ------------------------------------------------------- +# +# P12 terminal in MDC emulation mode and 132 column mode. +# +prism12-m-w|p12-m-w|P12-M-W|MDC Prism-12 in MDC emulation and 132 column mode, + use=p9-8-w, + +# p14: Prism-14 in ANSII mode +# --------------------------- +# +# See p9 definition. +# +prism14|p14|P14|MDC Prism-14 in ANSII mode, + use=p9, + +# p14-w: Prism-14 in 132 column mode +# ---------------------------------- +# +# 'Wide' version of p14. +# +prism14-w|p14-w|P14-W|MDC Prism-14 in 132 column mode, + use=p9-w, + +# p14-m: Prism-14 in MDC emulation mode +# ------------------------------------- +# +# P14 terminal in MDC emulation mode. +# Similar to p8 definition. +# Insertion and deletion operations possible. +# +prism14-m|p14-m|P14-M|MDC Prism-14 in MDC emulation mode, + use=p9-8, + +# p14-m-w: Prism-14 in MDC emulation and 132 column modes +# ------------------------------------------------------- +# +# P14 terminal in MDC emulation mode and 132 column mode. +# +prism14-m-w|p14-m-w|P14-M-W|MDC Prism-14 in MDC emulation and 132 column mode, + use=p9-8-w, + +# End of McDonnell Information Systems Prism definitions + +# These things were popular in the Pick database community at one time +# From: George Land <georgeland@aol.com> 24 Sep 1996 +p8gl|prism8gl|McDonnell-Douglas Prism-8 alternate definition, + am, bw, hs, mir, + cols#80, lines#24, ma#1, wsl#78, xmc#1, + bel=^G, blink=^CB, clear=^L, cr=^M, cub1=^U, cud1=^J, cuf1=^F, + cup=\E[%i%p1%d;%p2%dH, cuu1=^Z, dch1=\s^H, dim=^CA, dl1=^P, + ed=\EJ, el=\EK, home=^A, ind=^J, invis=^CH, kbs=^H, kcub1=^U, + kcud1=^J, kcuf1=^F, kcuu1=^Z, kdch1=\s^H, kdl1=^P, ked=\EJ, + kel=\EK, kf1=^A@\r, kf10=^AI\r, kf12=^AJ\r, kf13=^AK\r, + kf14=^AL\r, kf15=^AM\r, kf16=^AN\r, kf17=^AO\r, kf2=^AA\r, + kf3=^AB\r, kf4=^AC\r, kf5=^AD\r, kf6=^AE\r, kf7=^AF\r, + kf8=^AG\r, kf9=^AH\r, khome=^A, lf1=F1, lf10=F10, lf2=F2, + lf3=F3, lf4=F4, lf5=F5, lf6=F6, lf7=F7, lf8=F8, lf9=F9, nel=^J^M, + pad=\0, rev=^CD, rmso=^C\s, rmul=^C\s, sgr0=^C\s, smso=^CE, + smul=^C0, + +#### Microterm (act, mime) +# +# The mime1 entries refer to the Microterm Mime I or Mime II. +# The default mime is assumed to be in enhanced act iv mode. +# + +# New "safe" cursor movement (5/87) from <reuss@umd5.umd.edu>. Prevents +# freakout with out-of-range args on Sytek multiplexors. No <smso=^N> and +# <rmso=^N> since it gets confused and it's too dim anyway. No <ich1> +# since Sytek insists ^S means xoff. +# (act4: found ":ic=2^S:ei=:im=:ip=.1*^V:" commented out in 8.3 -- esr) +act4|microterm|microterm act iv, + am, + cols#80, lines#24, + bel=^G, clear=\014$<12/>, cr=^M, cub1=^H, cud1=^K, cuf1=^X, + cup=\024%p1%{24}%+%c%p2%p2%?%{47}%>%t%{48}%+%;%{80}%+%c, + cuu1=^Z, dch1=\004$<.1*/>, dl1=\027$<2.3*/>, + ed=\037$<2.2*/>, el=\036$<.1*/>, home=^], + il1=\001<2.3*/>, ind=^J, kcub1=^H, kcud1=^K, kcuf1=^X, + kcuu1=^Z, +# The padding on :sr: and :ta: for act5 and mime is a guess and not final. +# The act 5 has hardware tabs, but they are in columns 8, 16, 24, 32, 41 (!)... +# (microterm5: removed obsolete ":ma==^Z^P^Xl^Kj:" -- esr) +act5|microterm5|microterm act v, + kcub1=^H, kcud1=^K, kcuf1=^X, kcuu1=^Z, ri=\EH$<3>, uc=^H\EA, use=act4, +# Mimes using brightness for standout. Half bright is really dim unless +# you turn up the brightness so far that lines show up on the screen. +mime-fb|full bright mime1, + is2=^S\E, rmso=^S, smso=^Y, use=mime, +mime-hb|half bright mime1, + is2=^Y\E, rmso=^Y, smso=^S, use=mime, +# (mime: removed obsolete ":ma=^X ^K^J^Z^P:"; removed ":do=^K:" that overrode +# the more plausible ":do=^J:" -- esr) +# uc was at one time disabled to get around a curses bug, be wary of it +mime|mime1|mime2|mimei|mimeii|microterm mime1, + am, + cols#80, it#8, lines#24, vt#9, + bel=^G, clear=^]^C, cr=^M, cub1=^H, cud1=^J, cuf1=^X, + cup=\024%p1%{24}%+%c%p2%p2%?%{32}%>%t%{48}%+%;%{80}%+%c, + cuu1=^Z, dl1=\027$<80>, ed=^_, el=^^, home=^], ht=\011$<2>, + il1=\001$<80>, ind=^J, is2=^S\E^Q, kcub1=^H, kcud1=^K, + kcuf1=^X, kcuu1=^Z, ri=\022$<3>, uc=^U, +# These termcaps (for mime2a) put the terminal in low intensity mode +# since high intensity mode is so obnoxious. +mime2a-s|microterm mime2a (emulating an enhanced soroc iq120), + am, + cols#80, lines#24, + bel=^G, clear=\EL, cr=^M, cub1=^H, cud1=^J, cuf1=^L, + cup=\E=%p1%{32}%+%c%p2%{32}%+%c, cuu1=\EI, dch1=\ED, + dl1=\027$<20*>, ed=\EJ$<20*>, el=\EK, home=^^, + il1=\001$<20*>, ind=^J, ip=$<2>, is2=\E), kcub1=^H, kcud1=^J, + kcuf1=^L, kcuu1=^K, ri=\EI, rmir=^Z, rmso=\E;, rmul=\E7, + smir=\EE, smso=\E\:, smul=\E6, +# This is the preferred mode (but ^X can't be used as a kill character) +mime2a|mime2a-v|microterm mime2a (emulating an enhanced vt52), + cols#80, it#8, lines#24, + bel=^G, clear=\EL, cr=^M, cub1=^H, cud1=^J, cuf1=\EC, + cup=\EY%p1%{32}%+%c%p2%{32}%+%c, cuu1=\EA, dch1=^N, + dl1=\027$<20*>, ed=\EQ$<20*>, el=\EP, home=\EH, ht=^I, + il1=\001$<20*>, ind=^J, ip=$<2>, is2=^Y, kcub1=\ED, + kcud1=\EB, kcuf1=\EC, kcuu1=\EA, ri=\EA, rmir=^Z, rmso=\E9, + rmul=\E5, smir=^O, smso=\E8, smul=\E4, +# (mime3a: removed obsolete ":ma=^X ^K^J^Z^P:" -- esr) +mime3a|mime1 emulating 3a, + am@, + kcub1=^H, kcud1=^K, kcuf1=^X, kcuu1=^Z, use=adm3a, +mime3ax|mime-3ax|mime1 emulating enhanced 3a, + it#8, + dl1=\027$<80>, ed=^_, el=^X, ht=\011$<3>, il1=\001$<80>, use=mime3a, +# Wed Mar 9 18:53:21 1983 +# We run our terminals at 2400 baud, so there might be some timing problems at +# higher speeds. The major improvements in this model are the terminal now +# scrolls down and insert mode works without redrawing the rest of the line +# to the right of the cursor. This is done with a bit of a kludge using the +# exit graphics mode to get out of insert, but it does not appear to hurt +# anything when using vi at least. If you have some users using act4s with +# programs that use curses and graphics mode this could be a problem. +mime314|mm314|mime 314, + am, + cols#80, lines#24, + clear=^L, cub1=^H, cuf1=^X, cup=\024%p1%c%p2%c, cuu1=^Z, + dch1=^D, dl1=^W, ed=^_, el=^^, home=^], ht=^I, il1=^A, kcub1=^H, + kcud1=^K, kcuf1=^X, kcuu1=^Z, rmir=^V, smir=^S, +# Microterm mime 340 from University of Wisconsin +mm340|mime340|mime 340, + cols#80, lines#24, + clear=\032$<12/>, cr=^M, cub1=^H, cud1=^J, cuf1=^L, + cup=\E=%p1%{32}%+%c%p2%{32}%+%c, cuu1=^K, + dch1=\E#$<2.1*/>, dl1=\EV$<49.6/>, ed=\037$<2*/>, + el=\EL$<2.1/>, ht=^I, il1=\EU$<46/>, ind=^J, is2=\E\,, + kbs=^H, kcub1=^H, kcud1=^J, kcuu1=^K, nel=^M^J, +# This came from University of Wisconsin marked "astro termcap for jooss". +# (mt4520-rv: removed obsolete ":kn#4:" and incorrect ":ri=\E[C:"; +# also added <rmam>/<smam> based on the init string -- esr) +mt4520-rv|micro-term 4520 reverse video, + am, hs, msgr, xenl, xon, + cols#80, it#8, lines#24, wsl#80, + bel=^G, clear=\E[H\E[J, cnorm=\E[0V\E8, cr=^M, + csr=\E[%i%p1%d;%p2%dr, cub=\E[%p1%dD, cub1=\E[D, + cud=\E[%p1%dB, cud1=\E[B, cuf=\E[%p1%dC, cuf1=\E[C, + cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA, cuu1=\E[A, + cvvis=\E7\E[0U, dch=\E[%p1%dP, dch1=\E[P, dl=\E[%p1%dM, + dl1=\E[M, ed=\E[J, el=\E[K, flash=\E[?5l$<200/>\E[?5h, + fsl=\E[?5l\E[?5h, home=\E[H, ht=^I, hts=\EH, ich=\E[%p1%d@, + ich1=\E[@, il=\E[%p1%dL, il1=\E[L, ind=\ED, + is2=\E(B\E[2l\E>\E[20l\E[?3l\E[?5h\E[?7h\E[1;24r\E[24;1H\E[H\E[J, + kbs=^H, kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A, + kf1=\EOP, kf2=\EOQ, kf3=\EOR, kf4=\EOS, khome=\E[H, + ll=\E[24;1H, nel=\EE, rc=\E8, rf=/usr/share/tabset/vt100, + ri=\EM, rmam=\E[?7l, rmso=\E[0m, rmul=\E[24m, + rs1=\E(B\E[2l\E>\E[20l\E[?3l\E[?5h\E[?7h\E[H\E[J, + sc=\E7, sgr0=\E[m, smam=\E[?7h, smso=\E[7m, smul=\E[4m, + tbc=\E[g, tsl=\E[25;1H, + +# Fri Aug 5 08:11:57 1983 +# This entry works for the ergo 4000 with the following setups: +# ansi,wraparound,newline disabled, xon/xoff disabled in both +# setup a & c. +# +# WARNING!!! There are multiple versions of ERGO 4000 microcode +# Be advised that very early versions DO NOT WORK RIGHT !! +# Microterm does have a ROM exchange program- use it or lose big +# (ergo400: added <rmam>/<smam> based on the init string -- esr) +ergo4000|microterm ergo 4000, + da, db, msgr, + cols#80, lines#66, + bel=^G, clear=\E[H\E[2J$<80>, cr=^M, cub1=^H, cud1=\E[B, + cuf1=\E[C, cup=\E[%i%p1%d;%p2%dH, cuu1=\E[A, + dch1=\E[1P$<80>, dl1=\E[1M$<5*>, ed=\E[0J$<15>, + el=\E[0K$<13>, ht=^I, il=\E[1L$<5*>, ind=\ED$<20*>, + is2=\E<\E=\E[?1l\E[?4l\E[?5l\E[?7h\E[?8h$<300>, + kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A, kf1=\EOP, + kf2=\EOQ, kf3=\EOR, kf4=\EOS, lf1=pf1, lf2=pf2, lf3=pf3, + lf4=pf4, ri=\EM$<20*>, rmam=\E[?7l, rmir=\E[4l, + rmkx=\E=$<4>, rmso=\E[m$<20>, sgr0=\E[m$<20>, + smam=\E[?7m, smir=\E[4h$<6>, smkx=\E=$<4>, + smso=\E[7m$<20>, + +#### NCR +# +# NCR's terminal group was merged with AT&T's when AT&T bought the company. +# For what happened to that group, see the ADDS section. +# +# There is an NCR4103 terminal that's just a re-badged Wyse-50. +# + +# The following vendor-supplied termcaps were captured from the Boundless +# Technologies site, 8 March 1998. I removed all-upper-case names that were +# identical, except for case, to lower-case ones. I also uncommented the acsc +# capabilities.X +# +# The Intecolor emulation of the NCR 2900/260C color terminal is basicly a +# DEC vt200/300 with color capabilities added. +ncr260intan|NCR Intecolor emulation of the 2900_260C with an ANSI keyboard, + colors#8, pairs#64, + op=\E[0m, setab=\E[4%p1%dm, setaf=\E[3%p1%dm, use=ncr260vt300an, +# The Intecolor emulation of the NCR 2900/260C color terminal is basicly a +# DEC vt200/300 with color capabilities added. +ncr260intwan|NCR Intecolor emulation of the 2900_260C with an ANSI keyboard, + colors#8, pairs#64, + op=\E[0m, setab=\E[4%p1%dm, setaf=\E[3%p1%dm, use=ncr260vt300wan, +# The Intecolor emulation of the NCR 2900/260C color terminal is basicly a DEC +# vt200/300 with color capabilities added. +ncr260intpp|NCR Intecolor emulation of the 2900_260C with a PC+ keyboard, + colors#8, pairs#64, + op=\E[0m, setab=\E[4%p1%dm, setaf=\E[3%p1%dm, use=ncr260vt300pp, +# The Intecolor emulation of the NCR 2900/260C color terminal is basicly a +# DEC vt200/300 with color capabilities added. +ncr260intwpp|NCR Intecolor emulation of the 2900_260C with a PC+ keyboard in 132 column mode, + colors#8, pairs#64, + op=\E[0m, setab=\E[4%p1%dm, setaf=\E[3%p1%dm, use=ncr260vt300wpp, +# This definition for ViewPoint supports several attributes. This means +# that it has magic cookies (extra spaces where the attributes begin). +# Some applications do not function well with magic cookies. The System +# Administrator's Shell in NCR Unix SVR4 1.03 is one such application. +# If supporting various attributes is not vital, 'xmc#1' and the extra +# attributes can be removed. +# Mapping to ASCII character set ('acsc' capability) can also be +# restored if needed. +ncr260vppp|NCR 2900_260 viewpoint, + am, bw, hs, km, mc5i, mir, msgr, xon, + cols#80, lines#24, nlab#32, xmc#1, + acsc=07a?h;j5k3l2m1n8q\:t4u9v=w0x6, bel=^G, blink=\EG2, + cbt=\EI, civis=\E`0, clear=\014$<40>, cnorm=\E`5, + cr=\r$<2>, cub1=\010$<2>, cud1=\n$<2>, cuf1=\006$<2>, + cup=\EY%p1%{32}%+%c%p2%{32}%+%c$<5>, cuu1=\032$<2>, + cvvis=\E`5, dch1=\EW$<2>, dim=\EGp, dl1=\El$<2>, dsl=\E`c, + ed=\Ek$<2>, el=\EK$<2>, fsl=^M, home=\036$<2>, ht=^I, + hts=\E1, il1=\EM$<2>, ind=\n$<2>, invis=\EG1, + is2=\Ee6\E~%$<100>\E+\E`\:\Ed/\E`1\EO\Ee4\Ec@0@\Ec@1A\EcB0\EcC1\Ee7$<100>, + kDC=\El, kEND=\Ek, kHOM=^A, kPRT=\E7, kRIT=^F, ka1=^A, ka3=\EJ, + kbs=^H, kc1=\ET, kc3=\EJ, kcub1=^U, kcud1=^J, kcuf1=^F, + kcuu1=^Z, kdch1=\EW, kend=\EK, kf1=^B1\r, kf10=^B\:\r, + kf11=^B;\r, kf12=^B<\r, kf13=^B=\r, kf14=^B>\r, kf15=^B?\r, + kf16=^B@\r, kf17=^B!\r, kf18=^B"\r, kf19=^B#\r, kf2=^B2\r, + kf20=^B$\r, kf21=\002%^M, kf22=^B&\r, kf23=^B'\r, + kf24=^B(\r, kf25=^B)\r, kf26=^B*\r, kf27=^B+\r, + kf28=^B\,\r, kf29=^B-\r, kf3=^B3\r, kf30=^B.\r, kf31=^B/\r, + kf32=^B0\r, kf4=^B4\r, kf5=^B5\r, kf6=^B6\r, kf7=^B7\r, + kf8=^B8\r, kf9=^B9\r, khome=^A, kich1=\Eq, knp=\EJ, kpp=\EJ, + kprt=\EP, ll=\001$<5>, mc0=\EP$<100>, mc4=^T, mc5=^R, + mrcup=\Ew@%p1%{48}%+%c%p2%{32}%+%c%p3%{32}%+%c$<5>, + nel=\037$<2>, rev=\EG4, ri=\Ej$<2>, rmacs=\EcB0\EH\003, + rmir=\Er, rmso=\EG0, rmul=\EG0, rmxon=\Ec20, + rs2=\Ee6\E~%$<100>\E+\E`\:\Ed/\E`1\EO\Ee4\Ec@0@\Ec@1A\EcB0\EcC1\Ee7$<100>, + sgr0=\EG0\EH\003, smacs=\EcB1\EH\002, smir=\Eq, + smso=\EG4, smul=\EG8, smxon=\Ec21, tsl=\EF, +ncr260vpwpp|NCR 2900_260 viewpoint wide mode, + cols#132, + cup=\Ea%i%p1%dR%p2%dC$<30>, + is2=\Ee6\E~%$<100>\E+\E`;\Ed/\E`1\EO\Ee4\Ec@0@\Ec@1A\EcB0\EcC1\Ee7$<100>, + rs2=\Ee6\E~%$<100>\E+\E`;\Ed/\E`1\EO\Ee4\Ec@0@\Ec@1A\EcB0\EcC1\Ee7$<100>, + use=ncr260vppp, +ncr260vt100an|NCR 2900_260 vt100 with ansi kybd, + am, hs, mir, msgr, xenl, xon, + cols#80, lines#24, nlab#32, + acsc=``aaffggjjkkllmmnnooqqssttuuvvwwxx~~, bel=^G, + blink=\E[5m, bold=\E[1m, civis=\E[?25l, + clear=\E[2J\E[1;1H$<20>, cnorm=\E[?25h, cr=\r$<1>, + csr=\E[%i%p1%d;%p2%dr, cub=\E[%p1%dD$<5>, + cub1=\E[D$<5>, cud=\E[%p1%dB$<5>, cud1=\E[B$<5>, + cuf=\E[%p1%dC$<5>, cuf1=\E[C$<5>, + cup=\E[%i%p1%d;%p2%dH$<10>, cuu=\E[%p1%dA$<5>, + cuu1=\E[A$<5>, dch=\E[%p1%dP$<5>, dch1=\E[1P$<5>, + dl=\E[%p1%dM$<5>, dl1=\E[M$<5>, dsl=\E[0$~\E[1$~, + ech=\E[%p1%dX, ed=\E[0J$<5>, el=\E[0K$<3>, el1=\E[1K$<3>, + fsl=\E[0$}, home=\E[H$<1>, hpa=\E[%p1%dG$<40>, ht=^I, + hts=\EH, ich=\E[%p1%d@$<5>, il=\E[%p1%dL$<5>, + il1=\E[L$<5>, ind=\ED$<5>, indn=\E[%p1%dE$<5>, + invis=\E[8m, + is2=\E[!p\E[?7;19;67h\E[?1;3;4l\E(B\E)0\017\E[2J\E[1;1H\E>$<200>, + ka1=\EOw, ka3=\EOu, kb2=\EOy, kbs=^H, kc1=\EOq, kc3=\EOs, + kcub1=\EOD, kcud1=\EOB, kcuf1=\EOC, kcuu1=\EOA, + kdch1=\E[3~, kent=\EOM, kf1=\EOP, kf2=\EOQ, kf3=\EOR, + kf4=\EOS, kfnd=\E[1~, khlp=\E[28~, kich1=\E[2~, knp=\E[6~, + kpp=\E[5~, krdo=\E[29~, kslt=\E[4~, nel=\EE$<5>, rc=\E8, + rev=\E[7m, ri=\EM$<5>, rmacs=^O, rmir=\E[4l, + rmkx=\E[?1l\E>, rmso=\E[0m, rmul=\E[0m, + rs2=\E[!p\E[?7;19;67h\E[?1;3;4l\E(B\E)0\017\E[2J\E[1;1H\E>$<200>, + sc=\E7, + sgr=\E[0%?%p1%p6%|%t;1%;%?%p2%t;4%;%?%p1%p3%|%t;7%;%?%p4%t;5%;m%?%p9%t\016%e\017%;$<20>, + sgr0=\E[0m\017$<20>, smacs=^N, smir=\E[4h, + smkx=\E[?1h\E=, smso=\E[1;7m, smul=\E[4m, tbc=\E[3g, + tsl=\E[2$~\E[1$}, vpa=\E[%p1%dd$<40>, +ncr260vt100wan|NCR 2900_260 vt100 wide mode ansi kybd, + cols#132, + cup=\E[%i%p1%d;%p2%dH$<30>, + is2=\E[!p\E[?3;7;19;67h\E[?1;4l\E(B\E)0\017\E[2J\E[1;1H\E>$<200>, + rs2=\E[!p\E[?3;7;19;67h\E[?1;4l\E(B\E)0\017\E[2J\E[1;1H\E>$<200>, + use=ncr260vt100an, +ncr260vt100pp|NCR 2900_260 vt100 with PC+ kybd, + is2=\E[!p\E[?7;19;67h\E[?1;3;4l\E(B\E)0\017\E[2J\E[1;1H\E>$<200>, + ka1=\E[H, ka3=\EOu, kb2=\E[V, kc3=\E[U, kcub1=\E[D, + kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A, kdch1=\E[4~, + kend=\E[5~, khome=\E[2~, kich1=\E[1~, knp=\E[6~, kpp=\E[3~, + lf1=pf1, lf2=pf2, lf3=pf3, lf4=pf4, rmkx=\E>, + rs2=\E[!p\E[?7;19;67h\E[?1;3;4l\E(B\E)0\017\E[2J\E[1;1H\E>$<200>, + smkx=\E=, + use=ncr260vt100an, +ncr260vt100wpp|NCR 2900_260 vt100 wide mode pc+ kybd, + cols#132, + cup=\E[%i%p1%d;%p2%dH$<30>, + is2=\E[!p\E[?3;7;19;67h\E[?1;4l\E(B\E)0\017\E[2J\E[1;1H\E>$<200>, + rs2=\E[!p\E[?3;7;19;67h\E[?1;4l\E(B\E)0\017\E[2J\E[1;1H\E>$<200>, + use=ncr260vt100pp, +ncr260vt200an|NCR 2900_260 vt200 with ansi kybd, + am, hs, mir, msgr, xenl, xon, + cols#80, lines#24, nlab#32, + acsc=``aaffggjjkkllmmnnooqqssttuuvvwwxx~~, bel=^G, + blink=\E[5m, bold=\E[1m, civis=\E[?25l, + clear=\E[2J\E[1;1H$<20>, cnorm=\E[?25h, cr=\r$<1>, + csr=\E[%i%p1%d;%p2%dr$<5>, cub=\E[%p1%dD$<5>, + cub1=\E[D$<5>, cud=\E[%p1%dB$<5>, cud1=\E[B$<5>, + cuf=\E[%p1%dC$<5>, cuf1=\E[C$<5>, + cup=\E[%i%p1%d;%p2%dH$<10>, cuu=\E[%p1%dA$<5>, + cuu1=\E[A$<5>, dch=\E[%p1%dP$<5>, dch1=\E[1P$<5>, + dl=\E[%p1%dM$<5>, dl1=\E[M$<5>, dsl=\E[0$~\E[1$~, + ech=\E[%p1%dX$<5>, ed=\E[0J, el=\E[0K$<5>, el1=\E[1K$<5>, + fsl=\E[0$}, home=\E[H, hpa=\E[%p1%dG$<40>, ht=^I, hts=\EH, + ich=\E[%p1%d@$<5>, il=\E[%p1%dL$<5>, il1=\E[L$<5>, + ind=\ED$<5>, indn=\E[%p1%dE$<5>, invis=\E[8m, + is2=\E[!p\E[?7;19;67h\E[?1;3;4l\E(B\E)0\017\E[2J\E[1;1H\E>$<200>, + ka1=\EOw, ka3=\EOu, kb2=\EOy, kbs=^H, kc1=\EOq, kc3=\EOs, + kcub1=\EOD, kcud1=\EOB, kcuf1=\EOC, kcuu1=\EOA, + kdch1=\E[3~, kent=\EOM, kf0=\EOy, kf1=\EOP, kf10=\E[21~, + kf11=\E[23~, kf12=\E[24~, kf13=\E[25~, kf14=\E[26~, + kf15=\E[28~, kf16=\E[29~, kf17=\E[31~, kf18=\E[32~, + kf19=\E[33~, kf2=\EOQ, kf20=\E[34~, kf21=\E[31~, + kf22=\E[32~, kf23=\E[33~, kf24=\E[34~, kf25=\E[35~, + kf26=\E[1~, kf27=\E[2~, kf28=\E[3~, kf29=\E[4~, kf3=\EOR, + kf30=\E[5~, kf31=\E[6~, kf32=\E[7~, kf33=\E[8~, kf34=\E[9~, + kf35=\E[10~, kf4=\EOS, kf5=\E[M, kf6=\E[17~, kf7=\E[18~, + kf8=\E[19~, kf9=\E[20~, kfnd=\E[1~, khlp=\E[28~, + kich1=\E[2~, knp=\E[6~, kpp=\E[5~, krdo=\E[29~, kslt=\E[4~, + mc0=\E[i, mc4=\E[4i, mc5=\E[5i, nel=\EE, rc=\E8, rev=\E[7m, + ri=\EM$<5>, rmacs=\017$<20>, rmam=\E[?7l, rmir=\E[4l, + rmkx=\E[?1l\E>, rmso=\E[27m, rmul=\E[24m, + rs2=\E[!p\E[?7;19;67h\E[?1;3;4l\E(B\E)0\017\E[2J\E[1;1H\E>$<200>, + sc=\E7, + sgr=\E[0%?%p1%p6%|%t;1%;%?%p2%t;4%;%?%p1%p3%|%t;7%;%?%p4%t;5%;m%?%p9%t\016%e\017%;$<20>, + sgr0=\E[0m\017$<20>, smacs=\016$<20>, smam=\E[?7h, + smir=\E[4h, smkx=\E[?1h\E=, smso=\E[7m, smul=\E[4m, + tbc=\E[3g, tsl=\E[2$~\E[1$}, vpa=\E[%p1%dd$<40>, +ncr260vt200wan|NCR 2900_260 vt200 wide mode ansi kybd, + cols#132, + cup=\E[%i%p1%d;%p2%dH$<30>, + is2=\E[!p\E[?3;7;19;67h\E[?4l\E(B\E)0\017\E[2J\E[1;1H$<200>, + rs2=\E[!p\E[?3;7;19;67h\E[?4l\E(B\E)0\017\E[2J\E[1;1H$<200>, + use=ncr260vt200an, +ncr260vt200pp|NCR 2900_260 vt200 with pc+ kybd, + ka1=\E[H, ka3=\EOu, kb2=\E[V, kc3=\E[U, kcub1=\E[D, + kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A, kdch1=\E[4~, + kend=\E[1~, khome=\E[H, kich1=\E[2~, knp=\E[6~, kpp=\E[5~, + lf1=pf1, lf2=pf2, lf3=pf3, lf4=pf4, rmkx=\E>, smkx=\E=, + use=ncr260vt200an, +ncr260vt200wpp|NCR 2900_260 vt200 wide mode pc+ kybd, + cols#132, + cup=\E[%i%p1%d;%p2%dH$<30>, + is2=\E[!p\E[?3;7;19;67h\E[?1;4l\E(B\E)0\017\E[2J\E[1;1H\E>$<200>, + rs2=\E[!p\E[?3;7;19;67h\E[?1;4l\E(B\E)0\017\E[2J\E[1;1H\E>$<200>, + use=ncr260vt200pp, +ncr260vt300an|NCR 2900_260 vt300 with ansi kybd, + am, hs, mir, msgr, xenl, xon, + cols#80, lines#24, nlab#32, + acsc=``aaffggjjkkllmmnnooqqssttuuvvwwxx~~, bel=^G, + blink=\E[5m, bold=\E[1m, civis=\E[?25l, + clear=\E[2J\E[1;1H$<20>, cnorm=\E[?25h, cr=\r$<1>, + csr=\E[%i%p1%d;%p2%dr$<5>, cub=\E[%p1%dD$<5>, + cub1=\E[D$<5>, cud=\E[%p1%dB$<5>, cud1=\E[B$<5>, + cuf=\E[%p1%dC$<5>, cuf1=\E[C$<5>, + cup=\E[%i%p1%d;%p2%dH$<10>, cuu=\E[%p1%dA$<5>, + cuu1=\E[A$<5>, dch=\E[%p1%dP$<5>, dch1=\E[1P$<5>, + dl=\E[%p1%dM$<5>, dl1=\E[M$<5>, dsl=\E[0$~\E[1$~, + ech=\E[%p1%dX$<5>, ed=\E[0J, el=\E[0K$<5>, el1=\E[1K$<5>, + fsl=\E[0$}, home=\E[H, hpa=\E[%p1%dG$<40>, ht=^I, hts=\EH, + ich=\E[%p1%d@$<5>, il=\E[%p1%dL$<5>, il1=\E[L$<5>, + ind=\ED$<5>, indn=\E[%p1%dE$<5>, invis=\E[8m, + is2=\E[!p\E[?7;19;67h\E[?1;3;4l\E[1;0%w\E(B\E)0\017\E[2J\E[1;1H\E>$<200>, + ka1=\EOw, ka3=\EOu, kb2=\EOy, kbs=^H, kc1=\EOq, kc3=\EOs, + kcub1=\EOD, kcud1=\EOB, kcuf1=\EOC, kcuu1=\EOA, + kdch1=\E[3~, kent=\EOM, kf0=\EOy, kf1=\EOP, kf10=\E[21~, + kf11=\E[23~, kf12=\E[24~, kf13=\E[25~, kf14=\E[26~, + kf15=\E[28~, kf16=\E[29~, kf17=\E[31~, kf18=\E[32~, + kf19=\E[33~, kf2=\EOQ, kf20=\E[34~, kf21=\E[31~, + kf22=\E[32~, kf23=\E[33~, kf24=\E[34~, kf25=\E[35~, + kf26=\E[1~, kf27=\E[2~, kf28=\E[3~, kf29=\E[4~, kf3=\EOR, + kf30=\E[5~, kf31=\E[6~, kf32=\E[7~, kf33=\E[8~, kf34=\E[9~, + kf35=\E[10~, kf4=\EOS, kf5=\E[M, kf6=\E[17~, kf7=\E[18~, + kf8=\E[19~, kf9=\E[20~, kfnd=\E[1~, khlp=\E[28~, + kich1=\E[2~, knp=\E[6~, kpp=\E[5~, krdo=\E[29~, kslt=\E[4~, + mc0=\E[i, mc4=\E[4i, mc5=\E[5i, nel=\EE, rc=\E8, rev=\E[7m, + ri=\EM$<5>, rmacs=\017$<20>, rmam=\E[?7l, rmir=\E[4l, + rmkx=\E[?1l\E>, rmso=\E[27m, rmul=\E[24m, + rs2=\E[!p\E[?7;19;67h\E[?1;3;4l\E[1;0%w\E(B\E)0\017\E[2J\E[1;1H\E>$<200>, + sc=\E7, + sgr=\E[0%?%p1%p6%|%t;1%;%?%p2%t;4%;%?%p1%p3%|%t;7%;%?%p4%t;5%;m%?%p9%t\016%e\017%;$<20>, + sgr0=\E[0m\017$<20>, smacs=\016$<20>, smam=\E[?7h, + smir=\E[4h, smkx=\E[?1h\E=, smso=\E[7m, smul=\E[4m, + tbc=\E[3g, tsl=\E[2$~\E[1$}, vpa=\E[%p1%dd$<40>, +ncr260vt300wan|NCR 2900_260 vt300 wide mode ansi kybd, + cols#132, + cup=\E[%i%p1%d;%p2%dH$<30>, + is2=\E[!p\E[?3;7;19;67h\E[?4l\E[1;0%w\E(B\E)0\017\E[2J\E[1;1H$<200>, + rs2=\E[!p\E[?3;7;19;67h\E[?4l\E[1;0%w\E(B\E)0\017\E[2J\E[1;1H$<200>, + use=ncr260vt300an, +ncr260vt300pp|NCR 2900_260 vt300 with pc+ kybd, + ka1=\E[H, ka3=\EOu, kb2=\E[V, kc3=\E[U, kcub1=\E[D, + kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A, kdch1=\E[4~, + kend=\E[1~, khome=\E[H, kich1=\E[2~, knp=\E[6~, kpp=\E[5~, + lf1=pf1, lf2=pf2, lf3=pf3, lf4=pf4, rmkx=\E>, smkx=\E=, + use=ncr260vt300an, +NCR260VT300WPP|ncr260vt300wpp|NCR 2900_260 vt300 wide mode pc+ kybd, + cols#132, + cup=\E[%i%p1%d;%p2%dH$<30>, + is2=\E[!p\E[?3;7;19;67h\E[?1;4l\E[1;0%w\E(B\E)0\017\E[2J\E[1;1H\E>$<200>, + rs2=\E[!p\E[?3;7;19;67h\E[?1;4l\E[1;0%w\E(B\E)0\017\E[2J\E[1;1H\E>$<200>, + use=ncr260vt300pp, +# This terminfo file contains color capabilities for the Wyse325 emulation of +# the NCR 2900/260C color terminal. Because of the structure of the command +# (escape sequence) used to set color attributes, one of the fore/background +# colors must be preset to a given value. I have set the background color to +# black. The user can change this setup by altering the last section of the +# 'setf' definition. The escape sequence to set color attributes is +# ESC d y <foreground_color> <background_color> 1 +# In addition, the background color can be changed through the desk accessories. +# The capablitiy 'op' sets colors to green on black (default combination). +# +# NOTE: The NCR Unix System Administrator's Shell will not function properly +# if the 'pairs' capability is defined. Un-Comment the 'pairs' +# capability and recompile if you wish to have it included. +# +ncr260wy325pp|NCR 2900_260 wyse 325, + am, bw, hs, km, mc5i, mir, msgr, xon, + colors#16, cols#80, lines#24, ncv#33, nlab#32, + acsc=07a?h;j5k3l2m1n8q\:t4u9v=w0x6, bel=^G, blink=\EG2, + cbt=\EI, civis=\E`0, clear=\E*$<10>, cnorm=\E`1, cr=^M, + cub1=\010$<5>, cud1=\n$<5>, cuf1=\014$<5>, + cup=\E=%p1%{32}%+%c%p2%{32}%+%c$<10>, cuu1=\013$<5>, + cvvis=\E`5, dch1=\EW$<50>, dl1=\ER$<5>, dsl=\E`c, + ed=\Ey$<5>, el=\Et$<5>, fsl=^M, home=\036$<5>, ht=^I, + hts=\E1, il1=\EE$<5>, ind=\n$<5>, invis=\EG1, + is2=\Ee6\Ed/\Ee1\Ed*\Er\EO\E`1\E`\:\E`@\E~!\E"\Ee4\Ex@\E`9\Ee7$<100>, + kDC=\ER, kEND=\EY, kHOM=\E{, kNXT=\EK, kPRT=\E7, kPRV=\EJ, + kRIT=^L, ka1=^^, kb2=\EJ, kbs=^H, kc1=\ET, kc3=\EK, kcbt=\EI, + kcub1=^H, kcud1=^J, kcuf1=^L, kcuu1=^K, kdch1=\EW, kend=\ET, + kf1=^A@\r, kf10=^AI\r, kf11=^AJ\r, kf12=^AK\r, kf13=^AL\r, + kf14=^AM\r, kf15=^AN\r, kf16=^AO\r, kf17=^A`\r, kf18=^Aa\r, + kf19=^Ab\r, kf2=^AA\r, kf20=^Ac\r, kf21=^Ad\r, kf22=^Ae\r, + kf23=^Af\r, kf24=^Ag\r, kf25=^Ah\r, kf26=^Ai\r, kf27=^Aj\r, + kf28=^Ak\r, kf29=^Al\r, kf3=^AB\r, kf30=^Am\r, kf31=^An\r, + kf32=^Ao\r, kf4=^AC\r, kf5=^AD\r, kf6=^AE\r, kf7=^AF\r, + kf8=^AG\r, kf9=^AH\r, khome=^^, kich1=\Eq, knp=\EK, kpp=\EJ, + kprt=\EP, mc0=\EP, mc4=^T, mc5=^R, + mrcup=\Ew@%p1%{48}%+%c%p2%{32}%+%c%p3%{32}%+%c$<10>, + nel=\037$<5>, rev=\EG4, ri=\Ej$<5>, rmacs=\EH\003\EcB0, + rmam=\Ed., rmir=\Er, rmso=\EG0, rmul=\EG0, rmxon=\Ec20, + rs2=\Ee6\Ed/\Ee1\Ed*\Er\EO\E`1\E`\:\E`@\E~!\E"\Ee4\Ex@\E`9\Ee7$<100>, + setb=\s, + setf=%?%p1%{0}%=%t%{49}%e%p1%{1}%=%t%{50}%e%p1%{2}%=%t%{51}%e%p1%{3}%=%t%{52}%e%p1%{4}%=%t%{53}%e%p1%{5}%=%t%{54}%e%p1%{6}%=%t%{55}%e%p1%{7}%=%t%{64}%e%p1%{8}%=%t%{57}%e%p1%{9}%=%t%{58}%e%p1%{10}%=%t%{59}%e%p1%{11}%=%t%{60}%e%p1%{12}%=%t%{61}%e%p1%{13}%=%t%{62}%e%p1%{14}%=%t%{63}%e%p1%{15}%=%t%{56}%;\Edy%c11$<100>, + sgr0=\EG0\EcB0\EcD$<15>, smacs=\EH\002\EcB1, smam=\Ed/, + smir=\Eq, smso=\EGt, smul=\EG8, smxon=\Ec21, tbc=\E0, + tsl=\EF, +ncr260wy325wpp|NCR 2900_260 wyse 325 wide mode, + cols#132, + cup=\Ea%i%p1%dR%p2%dC$<30>, + is2=\Ee6\Ed/\Ee1\Ed*\Er\EO\E`1\E`;\E`@\E~!\E"\Ee4\Ex@\E`9\Ee7$<100>, + rs2=\Ee6\Ed/\Ee1\Ed*\Er\EO\E`1\E`;\E`@\E~!\E"\Ee4\Ex@\E`9\Ee7$<100>, + use=ncr260wy325pp, +# This definition for Wyse 350 supports several attributes. This means +# that it has magic cookies (extra spaces where the attributes begin). +# Some applications do not function well with magic cookies. The System +# Administrator's Shell in NCR Unix SVR4 1.03 is one such application. +# If supporting various attributes is not vital, 'xmc#1' and the extra +# attributes can be removed. +# Mapping to ASCII character set ('acsc' capability) can also be +# restored if needed. +# In addition, color capabilities have been added to this file. The drawback, +# however, is that the background color has to be black. The foreground colors +# are numbered 0 through 15. +# +# NOTE: The NCR Unix System Administrator's Shell does not function properly +# with the 'pairs' capability defined as below. If you wish to +# have it included, Un-comment it and recompile (using 'tic'). +# +ncr260wy350pp|NCR 2900_260 wyse 350, + am, bw, hs, km, mc5i, mir, msgr, xon, + colors#16, cols#80, lines#24, ncv#33, nlab#32, xmc#1, + acsc=07a?h;j5k3l2m1n8q\:t4u9v=w0x6, bel=^G, blink=\EG2, + cbt=\EI, civis=\E`0, clear=\E+$<20>, cnorm=\E`1, cr=^M, + cub1=\010$<5>, cud1=\n$<5>, cuf1=\014$<5>, + cup=\E=%p1%{32}%+%c%p2%{32}%+%c$<40>, cuu1=\013$<5>, + cvvis=\E`5, dch1=\EW$<50>, dim=\EGp, dl1=\ER$<5>, dsl=\E`c, + ed=\Ey$<5>, el=\Et$<5>, fsl=^M, home=\036$<10>, ht=^I, + hts=\E1, il1=\EE$<5>, ind=\n$<5>, invis=\EG1, + is2=\Ee6\Ed/\Ee1\Ed*\Er\EO\E`1\E`\:\E`@\E~!\E"\Ee4\Ex@\E`9\Ee7$<100>, + kDC=\ER, kEND=\EY, kHOM=\E{, kPRT=\E7, kRIT=^L, ka1=^^, kbs=^H, + kc1=\ET, kc3=\EK, kcbt=\EI, kcub1=^H, kcud1=^J, kcuf1=^L, + kcuu1=^K, kdch1=\EW, kend=\ET, kf1=^A@\r, kf10=^AI\r, + kf11=^AJ\r, kf12=^AK\r, kf13=^AL\r, kf14=^AM\r, kf15=^AN\r, + kf16=^AO\r, kf17=^A`\r, kf18=^Aa\r, kf19=^Ab\r, kf2=^AA\r, + kf20=^Ac\r, kf21=^Ad\r, kf22=^Ae\r, kf23=^Af\r, kf24=^Ag\r, + kf25=^Ah\r, kf26=^Ai\r, kf27=^Aj\r, kf28=^Ak\r, kf29=^Al\r, + kf3=^AB\r, kf30=^Am\r, kf31=^An\r, kf32=^Ao\r, kf4=^AC\r, + kf5=^AD\r, kf6=^AE\r, kf7=^AF\r, kf8=^AG\r, kf9=^AH\r, + khome=^^, kich1=\Eq, knp=\EK, kpp=\EJ, kprt=\EP, + mc0=\EP$<10>, mc4=^T, mc5=^R, + mrcup=\Ew@%p1%{48}%+%c%p2%{32}%+%c%p3%{32}%+%c$<20>, + nel=\037$<5>, rev=\EG4, ri=\Ej$<5>, rmacs=\EH\003\EcB0, + rmam=\Ed., rmir=\Er, rmso=\EG0, rmul=\EG0, rmxon=\Ec20, + rs2=\Ee6\Ed/\Ee1\Ed*\Er\EO\E`1\E`\:\E`@\E~!\E"\Ee4\Ex@\E`9\Ee7$<100>, + setb=\s, + setf=%?%p1%{0}%=%t%{49}%e%p1%{1}%=%t%{50}%e%p1%{2}%=%t%{51}%e%p1%{3}%=%t%{52}%e%p1%{4}%=%t%{53}%e%p1%{5}%=%t%{54}%e%p1%{6}%=%t%{55}%e%p1%{7}%=%t%{102}%e%p1%{8}%=%t%{97}%e%p1%{9}%=%t%{98}%e%p1%{10}%=%t%{99}%e%p1%{11}%=%t%{101}%e%p1%{12}%=%t%{106}%e%p1%{13}%=%t%{110}%e%p1%{14}%=%t%{111}%e%p1%{15}%=%t%{56}%;\Em0%c$<100>, + sgr0=\EG0\EH\003\EcD, smacs=\EH\002\EcB1, smam=\Ed/, + smir=\Eq, smso=\EGt, smul=\EG8, smxon=\Ec21, tbc=\E0, + tsl=\EF, +ncr260wy350wpp|NCR 2900_260 wyse 350 wide mode, + cols#132, + cup=\Ea%i%p1%dR%p2%dC$<30>, + is2=\Ee6\Ed/\Ee1\Ed*\Er\EO\E`1\E`;\E`@\E~!\E"\Ee4\Ex@\E`9\Ee7$<200>, + rs2=\Ee6\Ed/\Ee1\Ed*\Er\EO\E`1\E`;\E`@\E~!\E"\Ee4\Ex@\E`9\Ee7$<200>, + use=ncr260wy350pp, +# This definition for Wyse 50+ supports several attributes. This means +# that it has magic cookies (extra spaces where the attributes begin). +# Some applications do not function well with magic cookies. The System +# Administrator's Shell in NCR Unix SVR4 1.03 is one such application. +# If supporting various attributes is not vital, 'xmc#1' and the extra +# attributes can be removed. +# Mapping to ASCII character set ('acsc' capability) can also be +# restored if needed. +# (ncr260wy50+pp: originally contained commented-out +# <acsc=j5k3l2m1n8q:t4u9v=w0x6>, as well as the commented-out one there -- esr) +ncr260wy50+pp|NCR 2900_260 wyse 50+, + am, bw, hs, km, mc5i, mir, msgr, xon, + cols#80, lines#24, nlab#32, xmc#1, + acsc=0wa_h[jukslrmqnxqzttuyv]wpxv, bel=^G, blink=\EG2, + cbt=\EI$<5>, civis=\E`0, clear=\E+$<20>, cnorm=\E`1, cr=^M, + cub1=\010$<5>, cud1=\n$<5>, cuf1=\014$<5>, + cup=\E=%p1%{32}%+%c%p2%{32}%+%c$<30>, cuu1=\013$<5>, + cvvis=\E`5, dch1=\EW$<50>, dim=\EGp, dl1=\ER$<5>, dsl=\E`c, + ed=\EY$<5>, el=\ET$<5>, fsl=^M, home=\036$<10>, + ht=\011$<5>, hts=\E1$<5>, il1=\EE$<5>, ind=\n$<5>, + invis=\EG1, + is2=\Ee6\E~"$<100>\E+\Ed/\Ee1\Ed*\Er\EO\E`1\E`\:\E`@\E~!\E"\Ee4\Ex@\E`9\Ee7$<100>, + kDC=\ER, kEND=\EY, kHOM=\E{, kPRT=\E7, kRIT=^L, ka1=^^, kbs=^H, + kc1=\ET, kc3=\EK, kcbt=\EI, kcub1=^H, kcud1=^J, kcuf1=^L, + kcuu1=^K, kdch1=\EW, kend=\ET, kf1=^A@\r, kf10=^AI\r, + kf11=^AJ\r, kf12=^AK\r, kf13=^AL\r, kf14=^AM\r, kf15=^AN\r, + kf16=^AO\r, kf17=^A`\r, kf18=^Aa\r, kf19=^Ab\r, kf2=^AA\r, + kf20=^Ac\r, kf21=^Ad\r, kf22=^Ae\r, kf23=^Af\r, kf24=^Ag\r, + kf25=^Ah\r, kf26=^Ai\r, kf27=^Aj\r, kf28=^Ak\r, kf29=^Al\r, + kf3=^AB\r, kf30=^Am\r, kf31=^An\r, kf32=^Ao\r, kf4=^AC\r, + kf5=^AD\r, kf6=^AE\r, kf7=^AF\r, kf8=^AG\r, kf9=^AH\r, + khome=^^, kich1=\Eq, knp=\EK, kpp=\EJ, kprt=\EP, + mc0=\EP$<10>, mc4=^T, mc5=^R, + mrcup=\Ew@%p1%{48}%+%c%p2%{32}%+%c%p3%{32}%+%c$<10>, + nel=\037$<5>, rev=\EG4, ri=\Ej$<5>, rmacs=\EH^C, rmam=\Ed., + rmir=\Er, rmso=\EG0, rmul=\EG0, rmxon=\Ec20, + rs2=\Ee6\E~"$<100>\E+\Ed/\Ee1\Ed*\Er\EO\E`1\E`\:\E`@\E~!\E"\Ee4\Ex@\E`9\Ee7$<100>, + sgr0=\EG0\EH\003$<15>, smacs=\EH^B, smam=\Ed/, smir=\Eq, + smso=\EGt, smul=\EG8, smxon=\Ec21, tbc=\E0$<5>, tsl=\EF, +ncr260wy50+wpp|NCR 2900_260 wyse 50+ wide mode, + cols#132, + cup=\Ea%i%p1%dR%p2%dC$<30>, + is2=\Ee6\E~"$<100>\E+\Ed/\Ee1\Ed*\Er\EO\E`1\E`;\E`@\E~!\E"\Ee4\Ex@\E`9\Ee7$<200>, + rs2=\Ee6\E~"$<100>\E+\Ed/\Ee1\Ed*\Er\EO\E`1\E`;\E`@\E~!\E"\Ee4\Ex@\E`9\Ee7$<200>, + use=ncr260wy50+pp, +ncr260wy60pp|NCR 2900_260 wyse 60, + am, bw, hs, km, mc5i, mir, msgr, xon, + cols#80, lines#24, nlab#32, + acsc=07a?h;j5k3l2m1n8q\:t4u9v=w0x6, bel=^G, blink=\EG2, + cbt=\EI$<15>, civis=\E`0, clear=\E*$<100>, cnorm=\E`1, + cr=^M, cub1=\010$<5>, cud1=\n$<5>, cuf1=\014$<5>, + cup=\E=%p1%{32}%+%c%p2%{32}%+%c$<10>, cuu1=\013$<5>, + cvvis=\E`5, dch1=\EW$<50>, dl1=\ER$<5>, dsl=\E`c, + ed=\Ey$<5>, el=\Et$<5>, fsl=^M, home=\036$<25>, + ht=\011$<15>, hts=\E1$<15>, il1=\EE$<5>, ind=\n$<5>, + invis=\EG1, + is2=\Ee6\E~4$<100>\E+\Ed/\Ee1\Ed*\Er\EO\E`1\E`\:\E`@\E~!\E"\Ee4\Ex@\E`9\Ee7$<100>, + kDC=\ER, kEND=\EY, kHOM=\E{, kNXT=\EK, kPRT=\E7, kPRV=\EJ, + kRIT=^L, ka1=^^, kb2=\EJ, kbs=^H, kc1=\ET, kc3=\EK, + kcbt=\EI$<15>, kcub1=^H, kcud1=^J, kcuf1=^L, kcuu1=^K, + kdch1=\EW, kend=\ET, kf1=^A@\r, kf10=^AI\r, kf11=^AJ\r, + kf12=^AK\r, kf13=^AL\r, kf14=^AM\r, kf15=^AN\r, kf16=^AO\r, + kf17=^A`\r, kf18=^Aa\r, kf19=^Ab\r, kf2=^AA\r, kf20=^Ac\r, + kf21=^Ad\r, kf22=^Ae\r, kf23=^Af\r, kf24=^Ag\r, kf25=^Ah\r, + kf26=^Ai\r, kf27=^Aj\r, kf28=^Ak\r, kf29=^Al\r, kf3=^AB\r, + kf30=^Am\r, kf31=^An\r, kf32=^Ao\r, kf4=^AC\r, kf5=^AD\r, + kf6=^AE\r, kf7=^AF\r, kf8=^AG\r, kf9=^AH\r, khome=^^, + kich1=\Eq, knp=\EK, kpp=\EJ, kprt=\EP, mc0=\EP, mc4=^T, mc5=^R, + mrcup=\Ew@%p1%{48}%+%c%p2%{32}%+%c%p3%{32}%+%c$<30>, + nel=\037$<5>, rev=\EG4, ri=\Ej$<5>, rmacs=\EH^C, rmam=\Ed., + rmir=\Er, rmso=\EG0, rmul=\EG0, rmxon=\Ec20, + rs2=\Ee6\E~4$<100>\E+\Ed/\Ee1\Ed*\Er\EO\E`1\E`\:\E`@\E~!\E"\Ee4\Ex@\E`9\Ee7$<100>, + sgr0=\EG0\EcB0\EcD$<15>, smacs=\EH^B, smam=\Ed/, + smir=\Eq, smso=\EGt, smul=\EG8, smxon=\Ec21, tbc=\E0$<15>, + tsl=\EF, +ncr260wy60wpp|NCR 2900_260 wyse 60 wide mode, + cols#132, + cup=\Ea%i%p1%dR%p2%dC$<30>, + is2=\Ee6\E~4$<100>\E+\Ed/\Ee1\Ed*\Er\EO\E`1\E`;\E`@\E~!\E"\Ee4\Ex@\E`9\Ee7$<100>, + rs2=\Ee6\E~4$<100>\E+\Ed/\Ee1\Ed*\Er\EO\E`1\E`;\E`@\E~!\E"\Ee4\Ex@\E`9\Ee7$<100>, + use=ncr260wy60pp, +ncr160vppp|NCR 2900_160 viewpoint, + use=ncr260vppp, +ncr160vpwpp|NCR 2900_160 viewpoint wide mode, + use=ncr260vpwpp, +ncr160vt100an|NCR 2900_160 vt100 with ansi kybd, + use=ncr260vt100an, +ncr160vt100pp|NCR 2900_160 vt100 with PC+ kybd, + use=ncr260vt100pp, +ncr160vt100wan|NCR 2900_160 vt100 wide mode ansi kybd, + use=ncr260vt100wan, +ncr160vt100wpp|NCR 2900_160 vt100 wide mode pc+ kybd, + use=ncr260vt100wpp, +ncr160vt200an|NCR 2900_160 vt200 with ansi kybd, + use=ncr260vt200an, +ncr160vt200pp|NCR 2900_160 vt200 with pc+ kybd, + use=ncr260vt200pp, +ncr160vt200wan|NCR 2900_160 vt200 wide mode ansi kybd, + use=ncr260vt200wan, +ncr160vt200wpp|NCR 2900_160 vt200 wide mode pc+ kybd, + use=ncr260vt200wpp, +ncr160vt300an|NCR 2900_160 vt300 with ansi kybd, + use=ncr260vt300an, +ncr160vt300pp|NCR 2900_160 vt300 with pc+ kybd, + use=ncr260vt300pp, +ncr160vt300wan|NCR 2900_160 vt300 wide mode ansi kybd, + use=ncr260vt300wan, +ncr160vt300wpp|NCR 2900_160 vt300 wide mode pc+ kybd, + use=ncr260vt300wpp, +ncr160wy50+pp|NCR 2900_160 wyse 50+, + use=ncr260wy50+pp, +ncr160wy50+wpp|NCR 2900_160 wyse 50+ wide mode, + use=ncr260wy50+wpp, +ncr160wy60pp|NCR 2900_160 wyse 60, + use=ncr260wy60pp, +ncr160wy60wpp|NCR 2900_160 wyse 60 wide mode, + use=ncr260wy60wpp, +ncrvt100an|ncrvt100pp|NCR vt100 for the 2900 terminal, + am, hs, mc5i, mir, msgr, xon, + cols#80, it#8, lines#24, nlab#32, + acsc=``aaffgghhiijjkkllmmnnqqttuuvvwwxxyyzz~~, + bel=^G, blink=\E[5m$<30>, bold=\E[1m$<30>, + clear=\E[2J\E[1;1H$<300>, cr=^M, + csr=\E[%i%p1%d;%p2%dr$<100>, cub=\E[%p1%dD$<30>, + cub1=\E[D$<2>, cud=\E[%p1%dB$<30>, cud1=\E[B$<2>, + cuf=\E[%p1%dC$<30>, cuf1=\E[C$<2>, + cup=\E[%i%p1%d;%p2%dH$<100>, cuu=\E[%p1%dA$<30>, + cuu1=\E[A$<2>, dch=\E[%p1%dP$<40>, dch1=\E[1P$<10>, + dl=\E[%p1%dM$<70>, dl1=\E[M$<40>, dsl=\E[31l$<25>, + ed=\E[0J$<300>, el=\E[0K$<30>, el1=\E[1K$<30>, + enacs=\E(B\E)0$<40>, fsl=1$<10>, home=\E[H$<2>$<80>, + ht=^I, hts=\EH, il=\E[%p1%dL$<80>, il1=\E[B\E[L$<80>, + ind=\ED, + is2=\E[12h\E[?10l\E%/0n\E[P\031\E[?3l\E(B\E)0$<200>, + kLFT=\E[D, kRIT=\E[C, ka1=\E[H, kbs=^H, kcub1=\E[D, + kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A, kent=^M, kf1=\EOP, + kf2=\EOQ, kf3=\EOR, kf4=\EOS, mc0=\E[i$<100>, nel=\EE, + rc=\E8, rev=\E[7m$<30>, ri=\EM$<50>, rmacs=\017$<90>, + rmir=\E[4l$<80>, rmso=\E[0m$<30>, rmul=\E[0m$<30>, + rs2=\Ec\E[12;31h\E[?3;4;5;10l\E[?6;7;19;25h\E[33;34l\E[0m\E(B\E)0\E%/0n\E[P\031$<200>, + sc=\E7, + sgr=\E[0%?%p1%p6%|%t;1%;%?%p2%t;4%;%?%p1%p3%|%t;7%;%?%p4%t;5%;m%?%p9%t\016%e\017%;$<100>, + sgr0=\017\E[0m$<120>, smacs=\016$<90>, smir=\E[4h$<80>, + smso=\E[7m$<30>, smul=\E[4m$<30>, tbc=\E[3g$<40>, + tsl=\E[>+1$<70>, +ncrvt100wan|NCRVT100WPP|ncrvt100wpp|NCR VT100 emulation of the 2900 terminal, + cols#132, + is2=\E[12h\E[?10l\E%/0n\E[P\031\E[?3h\E(B\E)0$<200>, + rs2=\Ec\E[12;31h\E[?4;5;10l\E?3;6;7;19;25h\E[33;34l\E[0m\E(B\E)0\E%/0n\E[P\031$<200>, + use=ncrvt100an, +# +# Vendor-supplied NCR termcaps end here + +# NCR7900 DIP switches: +# +# Switch A: +# 1-4 - Baud Rate +# 5 - Parity (Odd/Even) +# 6 - Don't Send or Do Send Spaces +# 7 - Parity Enable +# 8 - Stop Bits (One/Two) +# +# Switch B: +# 1 - Upper/Lower Shift +# 2 - Typewriter Shift +# 3 - Half Duplex / Full Duplex +# 4 - Light/Dark Background +# 5-6 - Carriage Return Without / With Line Feed +# 7 - Extended Mode +# 8 - Suppress Keyboard Display +# +# Switch C: +# 1 - End of line entry disabled/enabled +# 2 - Conversational mode / (Local?) Mode +# 3 - Control characters displayed / not displayed +# 4 - (2-wire?) / 4-wire communications +# 5 - RTS on and off for each character +# 6 - (50Hz?) / 60 Hz +# 7 - Exit after level zero diagnostics +# 8 - RS-232 interface +# +# Switch D: +# 1 - Reverse Channel (yes / no) +# 2 - Manual answer (no / yes) +# 3-4 - Cursor appearance +# 5 - Communication Rate +# 6 - Enable / Disable EXT turnoff +# 7 - Enable / Disable CR turnoff +# 8 - Enable / Disable backspace +# +# From <root@goliath.un.atlantaga.NCR.COM>, init string hacked by SCO. +ncr7900i|ncr7900|ncr 7900 model 1, + am, bw, ul, + cols#80, lines#24, xmc#1, + bel=^G, blink=\E0B, clear=^L, cr=^M, cub1=^H, cud1=^J, cuf1=^F, + cup=\E1%p2%c%p1%c, cuu1=^Z, dim=\E0A, ed=\Ek, el=\EK, ind=^J, + is2=\E0@\010\E3\E4\E7, kcub1=^U, kcud1=^J, kcuf1=^F, + kcuu1=^Z, khome=^A, ll=^A, mc4=^T, mc5=^R, rev=\E0P, rmso=\E0@, + rmul=\E0@, + sgr=\E0%p5%{64}%+%p4%{2}%*%+%p3%{16}%*%+%p2%{32}%*%+%p1%{17}%*%+%c, + sgr0=\E0@, smso=\E0Q, smul=\E0`, +ncr7900iv|ncr 7900 model 4, + am, bw, eslok, hs, + cols#80, lines#24, + bel=^G, clear=^L, cr=^M, cub1=^H, cud1=^J, + cup=\013%p1%{64}%+%c\E\005%p2%02d, dl1=\E^O, dsl=\Ey1, + fsl=\Ek\Ey5, home=\013@\E^E00, il1=\E^N, ind=^J, kbs=^H, + kcub1=\ED, kcud1=\EB, kcuf1=\EC, kcuu1=\EA, kf1=\ES, kf2=\ET, + kf3=\EU, kf4=\EV, kf5=\EW, kf6=\EP, kf7=\EQ, kf8=\ER, + khome=\EH, lf6=blue, lf7=red, lf8=white, nel=^M^J, + tsl=\Ej\Ex5\Ex1\EY8%p1%{32}%+%c\Eo, +ncr7901|ncr 7901 model, + am, bw, ul, + cols#80, lines#24, + bel=^G, blink=\E0B, civis=^W, clear=^L, cnorm=^X, cr=^M, + cub1=^H, cud1=^J, cuf1=^F, + cup=\EY%p1%{32}%+%c%p2%{32}%+%c, cuu1=^Z, dim=\E0A, + ed=\Ek, el=\EK, + hpa=\020%p1%{10}%/%{16}%*%p1%{10}%m%+%c, ind=^J, + is2=\E4^O, kclr=^L, kcub1=^U, kcud1=^J, kcuf1=^F, kcuu1=^Z, + khome=^H, ll=^A, mc4=^T, mc5=^R, rev=\E0P, rmso=^O, rmul=^O, + sgr=\E0%p5%{64}%+%p4%{2}%*%+%p3%{16}%*%+%p2%{32}%*%+%p1%{17}%*%+%c\016, + sgr0=^O, smso=\E0Q\016, smul=\E0`\016, + vpa=\013%p1%{64}%+%c, + +#### Perkin-Elmer (Owl) +# +# These are official terminfo entries from within Perkin-Elmer. +# + +bantam|pe550|pe6100|perkin elmer 550, + cols#80, lines#24, + bel=^G, clear=\EK$<20>, cr=^M, cub1=^H, cud1=^J, cuf1=\EC, + cup=\EX%p1%{32}%+%c\EY%p2%{32}%+%c, cuu1=\EA, + el=\EI$<20>, home=\EH, ind=^J, ll=\EH\EA, +fox|pe1100|perkin elmer 1100, + am, + cols#80, lines#24, + bel=^G, clear=\EH\EJ$<132>, cr=^M, cub1=^H, cud1=^J, + cuf1=\EC, cup=\EX%p1%{32}%+%c\EY%p2%{32}%+%c, cuu1=\EA, + ed=\EJ$<5.5*>, el=\EI, flash=\020\002$<200/>\020\003, + home=\EH, hts=\E1, ind=^J, ll=\EH\EA, tbc=\E3, +owl|pe1200|perkin elmer 1200, + am, in, + cols#80, lines#24, + bel=^G, clear=\EH\EJ$<132>, cr=^M, cub1=^H, cud1=^J, + cuf1=\EC, cup=\EX%p1%{32}%+%c\EY%p2%{32}%+%c, cuu1=\EA, + dch1=\EO$<5.5*>, dl1=\EM$<5.5*>, ed=\EJ$<5.5*>, + el=\EI$<5.5>, flash=\020\002$<200/>\020\003, home=\EH, + hts=\E1, ich1=\EN, il1=\EL$<5.5*>, ind=^J, ip=$<5.5*>, + kbs=^H, kf0=\ERJ, kf1=\ERA, kf2=\ERB, kf3=\ERC, kf4=\ERD, + kf5=\ERE, kf6=\ERF, kf7=\ERG, kf8=\ERH, kf9=\ERI, ll=\EH\EA, + rmso=\E!\0, sgr0=\E!\0, smso=\E!^H, tbc=\E3, +pe1251|pe6300|pe6312|perkin elmer 1251, + am, + cols#80, it#8, lines#24, pb#300, vt#8, xmc#1, + bel=^G, clear=\EK$<332>, cr=^M, cub1=\ED, cud1=\EB, cuf1=\EC, + cup=\EX%p1%{32}%+%c\EY%p2%{32}%+%c, cuu1=\EA, + ed=\EJ$<20*>, el=\EI$<10*>, home=\EH, hts=\E1, ind=^J, + kf0=\ERA, kf1=\ERB, kf10=\ERK, kf2=\ERC, kf3=\ERD, kf4=\ERE, + kf5=\ERF, kf6=\ERG, kf7=\ERH, kf8=\ERI, kf9=\ERJ, tbc=\E3, +# (pe7000m: this had +# rmul=\E!\0, smul=\E!\040, +# which is probably wrong, it collides with kf0 +pe7000m|perkin elmer 7000 series monochrome monitor, + am, + cols#80, lines#24, + bel=^G, cbt=\E!Y, clear=\EK, cr=^M, cub1=\ED, cud1=\EB, + cuf1=\EC, cup=\ES%p1%{32}%+%c%p2%{32}%+%c, cuu1=\EA, + ed=\EJ, el=\EI, home=\EH, ind=^J, + is1=\E!\0\EW 7o\Egf\ES7\s, kbs=^H, kcub1=\E!V, + kcud1=\E!U, kcuf1=\E!W, kcuu1=\E!T, kf0=\E!\0, kf1=\E!^A, + kf10=\E!^J, kf2=\E!^B, kf3=\E!^C, kf4=\E!^D, kf5=\E!^E, + kf6=\E!^F, kf7=\E!^G, kf8=\E!^H, kf9=\E!^I, khome=\E!S, + ll=\ES7\s, ri=\ER, +pe7000c|perkin elmer 7000 series colour monitor, + is1=\E!\0\EW 7o\Egf\Eb0\Ec7\ES7\s, rmso=\Eb0, + rmul=\E!\0, smso=\Eb2, smul=\E!\s, + use=pe7000m, + +#### Sperry Univac +# +# Sperry Univac has merged with Burroughs to form Unisys. +# + +# This entry is for the Sperry UTS30 terminal running the TTY +# utility under control of CP/M Plus 1R1. The functionality +# provided is comparable to the DEC vt100. +# (uts30: I added <rmam>/<smam> based on the init string -- esr) +uts30|sperry uts30 with cp/m@1R1, + am, bw, hs, + cols#80, lines#24, wsl#40, + acsc=``aaffggjjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~, + bel=^G, blink=\E[5m, bold=\E[1m, civis=\ER, clear=^L, + cnorm=\ES, cr=^M, csr=\EU%p1%{32}%+%c%p2%{32}%+%c, + cub=\E[%p1%dD, cub1=^H, cud=\E[%p1%dB, cud1=\EB, + cuf=\E[%p1%dC, cuf1=\EC, cup=\E[%i%p1%d;%p2%dH, + cuu=\E[%p1%dA, cuu1=\E[A, dch=\E[%p1%dP, dch1=\EM, + dl=\E[%p1%dM, dl1=\EL, ed=\E[J, el=\E[K, fsl=^M, home=\E[H, + ht=^I, ich=\E[%p1%d@, ich1=\EO, il=\E[%p1%dL, il1=\EN, + ind=^J, indn=\E[%p1%dB, is2=\E[U 7\E[24;1H, kbs=^H, + kcub1=\EOD, kcud1=\EOB, kcuf1=\EOC, kcuu1=\EOA, khome=\E[H, + rc=\EX, rev=\E[7m, rf=/usr/share/tabset/vt100, ri=\EI, + rin=\E[%p1%dA, rmacs=\Ed, rmam=\E[?7l, rmso=\E[m, + rmul=\E[m, rs2=\E>\E[?3l\E[?4l\E[?5l\E[?7h\E[?8h, + sc=\EW, sgr0=\E[m, smacs=\EF, smam=\E[?7m, smso=\E[7m, + smul=\E[4m, tsl=\E], uc=\EPB, + +#### Tandem +# +# Tandem builds these things for use with its line of fault-tolerant +# transaction-processing computers. They aren't generally available +# on the merchant market, and so are fairly uncommon. +# + +tandem6510|adm3a repackaged by Tandem, + use=adm3a, + +# A funny series of terminal that TANDEM uses. The actual model numbers +# have a fourth digit after 653 that designates minor variants. These are +# natively block-mode and rather ugly, but they have a character mode which +# this doubtless(?) exploits. There is a 6520 that is slightly dumber. +# (tandem653: had ":sb=\ES:", probably someone's mistake for sf; also, +# removed <if=/usr/share/tabset/tandem653>, no such file -- esr) +tandem653|t653x|Tandem 653x multipage terminal, + am, da, db, hs, + cols#80, lines#24, wsl#64, xmc#1, + clear=\EI, cub1=^H, cud1=^J, cuf1=\EC, + cup=\023%p1%{32}%+%c%p2%{32}%+%c, cuu1=\EA, dsl=\Eo\r, + ed=\EJ, el=\EK, fsl=^M, home=\EH, ind=\ES, ri=\ET, rmso=\E6\s, + rmul=\E6\s, sgr0=\E6\s, smso=\E6$, smul=\E60, tsl=\Eo, + +#### Tandy/Radio Shack +# +# Tandy has a line of VDTs distinct from its microcomputers. +# + +dmterm|deskmate terminal, + am, bw, + cols#80, lines#24, + bel=^G, civis=\EG5, clear=\Ej, cnorm=\EG6, cr=^M, cub1=^H, + cud1=\EB, cuf1=\EC, cup=\EY%p1%{32}%+%c%p2%{32}%+%c, + cuu1=\EA, dch1=\ES, dl1=\ER, ed=\EJ, el=\EK, home=\EH, ht=^I, + ich1=\EQ, il1=\EP, ind=\EX, invis@, kcub1=\ED, kcud1=\EB, + kcuf1=\EC, kcuu1=\EA, kf0=\E1, kf1=\E2, kf2=\E3, kf3=\E4, + kf4=\E5, kf5=\E6, kf6=\E7, kf7=\E8, kf8=\E9, kf9=\E0, + khome=\EH, lf0=f1, lf1=f2, lf2=f3, lf3=f4, lf4=f5, lf5=f6, + lf6=f7, lf7=f8, lf8=f9, lf9=f10, ll=\EE, rmul@, smul@, + use=adm+sgr, +dt100|dt-100|Tandy DT-100 terminal, + xon, + cols#80, lines#24, xmc#1, + acsc=jjkkllmmnnqqttuuvvwwxx, bel=^G, civis=\E[?25l, + clear=\E[H\E[2J, cnorm=\E[?25h, cr=^M, + csr=\E[%p1%2d;%p2%2dr, cub1=^H, cud1=\E[B, cuf1=\E[C, + cup=\010\E[%i%p1%d;%p2%dH, cuu1=\E[A, dch1=\E[P, + dl1=\E[M, ed=\E[J, el=\E[K, home=\E[H, ht=^I, ich1=\E[@, + il1=\E[L, ind=^J, is2=\E[?3l\E)0\E(B, kcub1=\E[D, + kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A, kf1=\E[?3i, + kf10=\E[?5i, kf2=\E[2i, kf3=\E[@, kf4=\E[M, kf5=\E[17~, + kf6=\E[18~, kf7=\E[19~, kf8=\E[20~, kf9=\E[21~, khome=\E[H, + knp=\E[29~, kpp=\E[28~, lf1=f1, lf2=f2, lf3=f3, lf4=f4, lf5=f5, + lf6=f6, lf7=f7, lf8=f8, ri=\EM, rmacs=^O, rmso=\E[m, rmul=\E[m, + sgr0=\E[m, smacs=^N, smso=\E[7m, smul=\E[4m, +dt100w|dt-100w|Tandy DT-100 terminal (wide mode), + cols#132, use=dt100, +dt110|Tandy DT-110 emulating ansi, + xon, + cols#80, lines#24, + acsc=jjkkllmmnnqqttuuvvwwxx, bel=^G, civis=\E[?25l, + clear=\E[H\E[2J, cnorm=\E[?25h, cr=^M, + csr=\E[%i%p1%d;%p2%dr, cub1=^H, cud1=\E[0B, cuf1=\E[C, + cup=\010\E[%i%p1%d;%p2%dH, cuu1=\E[0A, dch1=\E[0P, + dl1=\E[0M, ed=\E[0J, el=\E[0K, enacs=\E(B\E)0, home=\E[H, + ht=^I, ich1=\E[0@, il1=\E[0L, ind=^J, is2=\E[?3l\E)0\E(B, + kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A, kend=\E[K, + kf1=\E[1~, kf10=\E[10~, kf2=\E[2~, kf3=\E[3~, kf4=\E[4~, + kf5=\E[5~, kf6=\E[6~, kf7=\E[7~, kf8=\E[8~, kf9=\E[9~, + khome=\E[G, kich1=\E[@, knp=\E[26~, kpp=\E[25~, lf0=f1, + lf1=f2, lf2=f3, lf3=f4, lf4=f5, lf5=f6, lf6=f7, lf7=f8, lf8=f9, + lf9=f10, ri=\EM, rmacs=^O, rmso=\E[m, rmul=\E[m, sgr0=\E[m, + smacs=^N, smso=\E[7m, smul=\E[4m, +pt210|TRS-80 PT-210 printing terminal, + hc, os, + cols#80, + bel=^G, cr=^M, cud1=^J, ind=^J, + +#### Tektronix (tek) +# +# Tektronix tubes are graphics terminals. Most of them use modified +# oscilloscope technology incorporating a long-persistence green phosphor, +# and support vector graphics on a main screen with an attached "dialogue +# area" for interactive text. +# + +tek|tek4012|tektronix 4012, + os, + cols#75, lines#35, + bel=^G, clear=\E\014$<1000>, cr=^M, cub1=^H, cud1=^J, + ff=\014$<1000>, is2=\E^O, +# (tek4013: added <acsc> to suppress tic warnings re <smacs>/<rmacs> --esr) +tek4013|tektronix 4013, + acsc=, rmacs=\E^O, smacs=\E^N, use=tek4012, +tek4014|tektronix 4014, + cols#81, lines#38, + is2=\E\017\E9, use=tek4012, +# (tek4015: added <acsc> to suppress tic warnings re <smacs>/<rmacs> --esr) +tek4015|tektronix 4015, + acsc=, rmacs=\E^O, smacs=\E^N, use=tek4014, +tek4014-sm|tektronix 4014 in small font, + cols#121, lines#58, + is2=\E\017\E\:, use=tek4014, +# (tek4015-sm: added <acsc> to suppress tic warnings re <smacs>/<rmacs> --esr) +tek4015-sm|tektronix 4015 in small font, + acsc=, rmacs=\E^O, smacs=\E^N, use=tek4014-sm, +# Tektronix 4023 from Andrew Klossner <orca!andrew.tektronix@csnet-relay> +# +# You need to have "stty nl2" in effect. Some versions of tset(1) know +# how to set it for you. +# +# It's got the Magic Cookie problem around stand-out mode. If you can't +# live with Magic Cookie, remove the :so: and :se: fields and do without +# reverse video. If you like reverse video stand-out mode but don't want +# it to flash, change the letter 'H' to 'P' in the :so: field. +tek4023|tektronix 4023, + am, + cols#80, lines#24, vt#4, xmc#1, + bel=^G, clear=\E\014$<4/>, cr=^M, cub1=^H, cud1=^J, cuf1=^I, + cup=\034%p2%{32}%+%c%p1%{32}%+%c, kbs=^H, rmso=^_@, + smso=^_P, +# It is recommended that you run the 4025 at 4800 baud or less; +# various bugs in the terminal appear at 9600. It wedges at the +# bottom of memory (try "cat /usr/dict/words"); ^S and ^Q typed +# on keyboard don't work. You have to hit BREAK twice to get +# one break at any speed - this is a documented feature. +# Can't use cursor motion because it's memory relative, and +# because it only works in the workspace, not the monitor. +# Same for home. Likewise, standout only works in the workspace. +# +# <el> was commented out since vi and rogue seem to work better +# simulating it with lots of spaces! +# +# <il1> and <il> had 145ms of padding, but that slowed down vi's ^U +# and didn't seem necessary. +# +tek4024|tek4025|tek4027|tektronix 4024/4025/4027, + am, da, db, + cols#80, it#8, lines#34, lm#0, + bel=^G, clear=\037era\r\n\n, cmdch=^_, cr=^M, + cub=\037lef %p1%d\r, cub1=^H, cud=\037dow %p1%d\r, + cud1=^F^J, cuf=\037rig %p1%d\r, cuf1=\037rig\r, + cuu=\037up %p1%d\r, cuu1=^K, dch1=\037dch\r, + dl=\037dli %p1%d\r\006, dl1=\037dli\r\006, + ed=\037dli 50\r, ht=^I, ich1=\037ich\r \010, + il=\037up\r\037ili %p1%d\r, il1=\037up\r\037ili\r, + ind=^F^J, + is2=!com 31\r\n\037sto 9 17 25 33 41 49 57 65 73\r, + rmkx=\037lea p2\r\037lea p4\r\037lea p6\r\037lea p8\r\037lea f5\r, + smkx=\037lea p4 /h/\r\037lea p8 /k/\r\037lea p6 / /\r\037lea p2 /j/\r\037lea f5 /H/\r, +tek4025-17|tek 4025 17 line window, + lines#17, use=tek4025, +tek4025-17-ws|tek 4025 17 line window in workspace, + is2=!com 31\r\n\037sto 9 17 25 33 41 49 57 65 73\r\037wor 17\r\037mon 17\r, + rmcup=\037mon h\r, rmso=\037att s\r, smcup=\037wor h\r, + smso=\037att e\r, + use=tek4025-17, +tek4025-ex|tek4027-ex|tek 4025/4027 w/!, + is2=\037com 33\r\n!sto 9 17 25 33 41 49 57 65 73\r, + rmcup=\037com 33\r, smcup=!com 31\r, + use=tek4025, +# Tektronix 4025a +# From: Doug Gwyn <gwyn@brl-smoke.ARPA> +# The following status modes are assumed for normal operation (replace the +# initial "!" by whatever the current command character is): +# !COM 29 # NOTE: changes command character to GS (^]) +# ^]DUP +# ^]ECH R +# ^]EOL +# ^]RSS T +# ^]SNO N +# ^]STO 9 17 25 33 41 49 57 65 73 +# Other modes may be set according to communication requirements. +# If the command character is inadvertently changed, termcap can't restore it. +# Insert-character cannot be made to work on both top and bottom rows. +# Clear-to-end-of-display emulation via !DLI 988 is too grotty to use, alas. +# There also seems to be a problem with vertical motion, perhaps involving +# delete/insert-line, following a typed carriage return. This terminal sucks. +# Delays not specified; use "stty ixon -ixany" to enable DC3/DC1 flow control! +# (tek4025a: removed obsolete ":xx:". This may mean the tek4025a entry won't +# work any more. -- esr) +tek4025a|Tektronix 4025A, + am, bw, da, db, xon, + cols#80, it#8, lines#34, + bel=^G, cbt=\035bac;, clear=\035era;\n\035rup;, cmdch=^], + cr=^M, cub=\035lef %p1%d;, cub1=^H, cud=\035dow %p1%d;, + cud1=^J, cuf=\035rig %p1%d;, cuf1=\035rig;, + cuu=\035up %p1%d;, cuu1=^K, dch=\035dch %p1%d;, + dch1=\035dch;, dl=\035dli %p1%d;, dl1=\035dli;, + el=\035dch 80;, hpa=\r\035rig %p1%d;, ht=^I, + il1=\013\035ili;, ind=^J, indn=\035dow %p1%d;, + tbc=\035sto;, +# From: cbosg!teklabs!davem Wed Sep 16 21:11:41 1981 +# Here's the command file that I use to get rogue to work on the 4025. +# It should work with any program using the old curses (e.g. it better +# not try to scroll, or cursor addressing won't work. Also, you can't +# see the cursor.) +# (This "learns" the arrow keys for rogue. I have adapted it for termcap - mrh) +tek4025-cr|tek 4025 for curses and rogue, + am, + cols#80, it#8, lines#33, + clear=\037era;, cub1=^H, cud1=^F^J, cuf1=\037rig;, + cup=\037jum%i%p1%d\,%p2%d;, cuu1=^K, ht=^I, ind=^F^J, + is2=!com 31\r\n\037sto 9 17 25 33 41 49 57 65 73\r, + rmcup=\037wor 0, smcup=\037wor 33h, +# next two lines commented out since curses only allows 128 chars, sigh. +# :ti=\037lea p1/b/\037lea p2/j/\037lea p3/n/\037lea p4/h/\037lea p5/ /\037lea p6/l/\037lea p7/y/\037lea p8/k/\037lea p9/u/\037lea p./f/\037lea pt/`era w/13\037lea p0/s/\037wor 33h:\ +# :te=\037lea p1\037lea p2\037lea p3\037lea p4\037lea pt\037lea p5\037lea p6\037lea p7\037lea p8\037lea p9/la/13\037lea p.\037lea p0\037wor 0: +tek4025ex|4025ex|4027ex|tek 4025 w/!, + is2=\037com 33\r\n!sto 9\,17\,25\,33\,41\,49\,57\,65\,73\r, + rmcup=\037com 33\r, smcup=!com 31\r, + use=tek4025, +tek4105|tektronix 4105, + am, mir, msgr, ul, xenl, xt, + cols#79, it#8, lines#29, + acsc=, bel=^G, blink=\E[=3;<7m, bold=\E[=7;<4m, cbt=\E[Z, + clear=\E[2J\E[H, cr=^M, cud1=\E[1B, cuf1=\E[1C, + cup=\E[%i%p1%2d;%p2%2dH, cuu1=\E[1A, dch1=\E[1P, + dim=\E[=1;<6m, dl1=\E[1M, ed=\E[J, el=\E[K, home=\E[H, ht=^I, + il1=\E[1L, ind=\E[S, invis=\E[=6;<5, is1=\E%!1\E[m, + is2=\E%!1\E[?6141\E[m, kbs=^H, kcub1=\E[1D, kcud1=\E[1B, + kcuf1=\E[1C, kcuu1=\E[1A, rev=\E[=1;<3m, ri=\E[T, + rmacs=\E[m, rmcup=, rmir=\E[4l, rmso=\E[=0;<1m, + rmul=\E[=0;<1m, sgr0=\E[=0;<1m, smacs=\E[1m, + smcup=\E%!1\E[?6l\E[2J, smir=\E[4h, smso=\E[=2;<3m, + smul=\E[=5;<2m, tbc=\E[1g, + +# (tek4105-30: I added <rmam>/<smam> based on the init string -- esr) +tek4105-30|4015 emulating 30 line vt100, + am, mir, msgr, xenl, xon, + cols#80, it#8, lines#30, vt#3, + acsc=``aaffggjjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~, + bel=^G, blink=\E[5m$<2>, bold=\E[1m$<2>, + clear=\E[H\E[J$<50>, cr=^M, csr=\E[%i%p1%d;%p2%dr, + cub=\E[%p1%dD, cub1=^H, cud=\E[%p1%dB, cud1=^J, + cuf=\E[%p1%dC, cuf1=\E[C$<2>, + cup=\E[%i%p1%d;%p2%dH$<5>, cuu=\E[%p1%dA, + cuu1=\E[A$<2>, ed=\E[J$<50>, el=\E[K$<3>, el1=\E[1K$<3>, + enacs=\E(B\E)0, home=\E[H, ht=^I, hts=\EH, ind=^J, ka1=\EOq, + ka3=\EOs, kb2=\EOr, kbs=^H, kc1=\EOp, kc3=\EOn, kcub1=\EOD, + kcud1=\EOB, kcuf1=\EOC, kcuu1=\EOA, kent=\EOM, kf0=\EOy, + kf1=\EOP, kf10=\EOx, kf2=\EOQ, kf3=\EOR, kf4=\EOS, kf5=\EOt, + kf6=\EOu, kf7=\EOv, kf8=\EOl, kf9=\EOw, rc=\E8, + rev=\E[7m$<2>, ri=\EM$<5>, rmacs=^O, rmam=\E[?7l, + rmkx=\E[?1l\E>, rmso=\E[m$<2>, rmul=\E[m$<2>, + rs2=\E>\E[?3l\E[?4l\E[?5l\E[?7h\E[?8h, sc=\E7, + sgr=\E[0%?%p1%p6%|%t;1%;%?%p2%t;4%;%?%p1%p3%|%t;7%;%?%p4%t;5%;m%?%p9%t\016%e\017%;, + sgr0=\E[m\017$<2>, smacs=^N, smam=\E[?7h, smkx=\E[?1h\E=, + smso=\E[1;7m$<2>, smul=\E[4m$<2>, tbc=\E[3g, + +# Tektronix 4105 from BRL +# The following setup modes are assumed for normal operation: +# CODE ansi CRLF no DABUFFER 141 +# DAENABLE yes DALINES 30 DAMODE replace +# DAVISIBILITY yes ECHO no EDITMARGINS 1 30 +# FLAGGING input INSERTREPLACE replace LFCR no +# ORIGINMODE relative PROMPTMODE no SELECTCHARSET G0 B +# SELECTCHARSET G1 0 TABS -2 +# Other setup modes may be set for operator convenience or communication +# requirements; I recommend +# ACURSOR 1 0 AUTOREPEAT yes AUTOWRAP yes +# BYPASSCANCEL <LF> CURSORKEYMODE no DAINDEX 1 0 0 +# EOFSTRING '' EOLSTRING <CR> EOMCHARS <CR> <NU> +# GAMODE overstrike GCURSOR 0 100 0 GSPEED 10 1 +# IGNOREDEL no KEYEXCHAR <DL> NVDEFINE -53 "<NU>" +# PROMPTSTRING '' QUEUESIZE 2460 WINDOW 0 0 4095 3132 +# XMTDELAY 0 +# and factory color maps. After setting these modes, save them with NVSAVE. No +# delays are specified; use "stty ixon -ixany" to enable DC3/DC1 flow control! +# "IC" cannot be used in combination with "im" & "ei". +# "tek4105a" is just a guess: +tek4105a|Tektronix 4105, + msgr, xon, + cols#80, it#8, lines#30, vt#3, + acsc=, bel=^G, blink=\E[5m, bold=\E[1m, cbt=\E[Z, + civis=\E%!0\ETD00\E%!1, clear=\E[H\E[J, + cnorm=\E%!0\ETD10\E%!1, cr=^M, csr=\E[%i%p1%d;%p2%dr, + cub=\E[%p1%dD, cub1=^H, cud=\E[%p1%dB, cud1=^J, + cuf=\E[%p1%dC, cuf1=\E[C, cup=\E[%i%p1%d;%p2%dH, + cuu=\E[%p1%dA, cuu1=\EM, cvvis=\E%!0\ETD70\E%!1, + dch=\E[%p1%dP, dch1=\E[P, dl=\E[%p1%dM, dl1=\E[M, + ech=\E[%p1%dX, ed=\E[J, el=\E[K, home=\E[H, ht=^I, hts=\EH, + il=\E[%p1%dL, il1=\E[L, ind=^J, indn=\E[%p1%dS, is2=\E%!1, + kbs=^H, kcub1=\EOD, kcud1=\EOB, kcuf1=\EOC, kcuu1=\EOA, + kf0=\EOA, kf1=\EOB, kf2=\EOC, kf3=\EOD, kf4=\EOP, kf5=\EOQ, + kf6=\EOR, kf7=\EOS, lf0=F1, lf1=F2, lf2=F3, lf3=F4, lf4=F5, + lf5=F6, lf6=F8, ll=\E[30;H, nel=\EE, rc=\E8, rev=\E[7m, ri=\EM, + rin=\E[%p1%dT, rmacs=^O, rmcup=\E%!0\ELBH=\E%!1, + rmir=\E[4l, rmkx=\E[?1l\E>, rmso=\E[m, rmul=\E[m, sc=\E7, + sgr0=\E[m, smacs=^N, smcup=\E[?6l, smir=\E[4h, + smkx=\E[?1h\E=, smso=\E[7m, smul=\E[4m, tbc=\E[3g, + +# +# Tektronix 4106/4107/4109 from BRL +# The following setup modes are assumed for normal operation: +# CODE ansi COLUMNMODE 80 CRLF no +# DABUFFER 141 DAENABLE yes DALINES 32 +# DAMODE replace DAVISIBILITY yes ECHO no +# EDITMARGINS 1 32 FLAGGING input INSERTREPLACE replace +# LFCR no LOCKKEYBOARD no ORIGINMODE relative +# PROMPTMODE no SELECTCHARSET G0 B SELECTCHARSET G1 0 +# TABS -2 +# Other setup modes may be set for operator convenience or communication +# requirements; I recommend +# ACURSOR 1 0 AUTOREPEAT yes AUTOWRAP yes +# BYPASSCANCEL <LF> CURSORKEYMODE no DAINDEX 1 0 0 +# EOFSTRING '' EOLSTRING <CR> EOMCHARS <CR> <NU> +# GAMODE overstrike GCURSOR 0 100 0 GSPEED 9 3 +# IGNOREDEL no KEYEXCHAR <DL> NVDEFINE -53 "<NU>" +# PROMPTSTRING '' QUEUESIZE 2620 WINDOW 0 0 4095 3132 +# XMTDELAY 0 +# and factory color maps. After setting these modes, save them with NVSAVE. No +# delays are specified; use "stty ixon -ixany" to enable DC3/DC1 flow control! +# "IC" cannot be used in combination with "im" & "ei". +tek4106brl|tek4107brl|tek4109brl|Tektronix 4106 4107 or 4109, + msgr, xon, + cols#80, it#8, lines#32, vt#3, + acsc=, bel=^G, blink=\E[5m, bold=\E[1m, cbt=\E[Z, + civis=\E%!0\ETD00\E%!1, clear=\E[H\E[J, + cnorm=\E%!0\ETD10\E%!1, cr=^M, csr=\E[%i%p1%d;%p2%dr, + cub=\E[%p1%dD, cub1=^H, cud=\E[%p1%dB, cud1=^J, + cuf=\E[%p1%dC, cuf1=\E[C, cup=\E[%i%p1%d;%p2%dH, + cuu=\E[%p1%dA, cuu1=\EM, cvvis=\E%!0\ETD70\E%!1, + dch=\E[%p1%dP, dch1=\E[P, dl=\E[%p1%dM, dl1=\E[M, + ech=\E[%p1%dX, ed=\E[J, el=\E[K, home=\E[H, ht=^I, hts=\EH, + il=\E[%p1%dL, il1=\E[L, ind=^J, indn=\E[%p1%dS, is2=\E%!1, + kbs=^H, kcub1=\EOD, kcud1=\EOB, kcuf1=\EOC, kcuu1=\EOA, + kf0=\EOA, kf1=\EOB, kf2=\EOC, kf3=\EOD, kf4=\EOP, kf5=\EOQ, + kf6=\EOR, kf7=\EOS, lf0=F1, lf1=F2, lf2=F3, lf3=F4, lf4=F5, + lf5=F6, lf6=F8, ll=\E[32;H, nel=\EE, rc=\E8, rev=\E[7m, ri=\EM, + rin=\E[%p1%dT, rmacs=^O, rmcup=\E%!0\ELBH=\E%!1, + rmir=\E[4l, rmkx=\E[?1l\E>, rmso=\E[m, rmul=\E[m, + rs1=\030\E%!0\EKC\E\014\EKR0\EKF0\ENM0\ELBH=\ETF8000010F40\ELI100\ELLB0\ELM0\EKE0\ENF1\EKS0\END0\ERE0\E%!1\Ec\E[?3;5l\E[?7;8h\E[r\E[m\E>, + sc=\E7, sgr0=\E[m, smacs=^N, smcup=\E[?6l, smir=\E[4h, + smkx=\E[?1h\E=, smso=\E[7;42m, smul=\E[4m, tbc=\E[3g, + +tek4107|tek4109|tektronix terminals 4107 4109, + am, mir, msgr, ul, xenl, xt, + cols#79, it#8, lines#29, + bel=^G, blink=\E%!1\E[5m$<2>\E%!0, + bold=\E%!1\E[1m$<2>\E%!0, clear=\ELZ, cnorm=\E%!0, cr=^M, + cub1=^H, cud1=^J, cuf1=\EC, + cup=\EY%p1%{32}%+%c%p2%{32}%+%c, cuu1=\EA, cvvis=\E%!3, + dim=\E%!1\E[<0m$<2>\E%!0, ed=\EJ, el=\EK, ht=^I, ind=^J, + kbs=^H, kcub1=\ED, kcud1=\EB, kcuf1=\EC, kcuu1=\EA, + rev=\E%!1\E[7m$<2>\E%0, ri=\EI, + rmso=\E%!1\E[m$<2>\E%!0, rmul=\E%!1\E[m$<2>\E%!0, + sgr=\E%%!1\E[%?%p1%t;7%;%?%p2%t;4%;%?%p3%t;7%;%?%p4%t;5%;%?%p6%t;1%;m\E%%!0, + sgr0=\E%!1\E[m$<2>\E%!0, smso=\E%!1\E[7;5m$<2>\E%!0, + smul=\E%!1\E[4m$<2>\E%!0, +# Tektronix 4207 with sysline. In the ancestral termcap file this was 4107-s; +# see the note attached to tek4207. +tek4207-s|Tektronix 4207 with sysline but no memory, + eslok, hs, + dsl=\E7\E[?6l\E[2K\E[?6h\E8, fsl=\E[?6h\E8, + is1=\E%!1\E[2;32r\E[132D\E[2g\EH\E[8C\EH\E[8C\EH\E[8C\EH\E[8C\EH\E[8C\EH\E[8C\EH\E[8C\EH\E[8C\EH\E[8C\EH\E[J, + is2=\E7\E[?6l\E[2K\E[?6h\E8, + tsl=\E7\E[?6l\E[2K\E[;%i%df, use=tek4107, + +# The 4110 series may be a wonderful graphics series, but they make the 4025 +# look good for screen editing. In the dialog area, you can't move the cursor +# off the bottom line. Out of the dialog area, ^K moves it up, but there +# is no way to scroll. +# +# Note that there is a floppy for free from Tek that makes the +# 4112 emulate the vt52 (use the vt52 termcap). There is also +# an expected enhancement that will use ANSI standard sequences. +# +# 4112 in non-dialog area pretending to scroll. It really wraps +# but vi is said to work (more or less) in this mode. +# +# 'vi' works reasonably well with this entry. +# +otek4112|o4112-nd|otek4113|otek4114|old tektronix 4110 series, + am, + cols#80, lines#34, + bel=^G, clear=\E^L, cr=^M, cub1=^H, cud1=^J, cuu1=^K, ind=^J, + rmcup=\EKA1\ELV1, smcup=\EKA0\ELV0\EMG0, +# The 4112 with the ANSI compatibility enhancement +tek4112|tek4114|tektronix 4110 series, + am, db, + cols#80, lines#34, + cbt=\E[Z, clear=\E[2J\E[0;0H, cub1=^H, cuf1=\E[C, + cup=\E[%i%p1%d;%p2%dH, cuu1=\EM, dch1=\E[P, dl1=\E[M, + ed=\E[0J, el=\E[0K, ich1=\E[@, il1=\E[L, + ind=\E7\E[0;0H\E[M\E8, is2=\E3!1, ri=\E7\E[0;0H\E[L\E8, + rmso=\E[m, rmul=\E[m, sgr0=\E[m, smso=\E[7m, smul=\E[4m, +tek4112-nd|4112 not in dialog area, + cuu1=^K, use=tek4112, +tek4112-5|4112 in 5 line dialog area, + lines#5, use=tek4112, +# (tek4113: this used to have "<cuf1=\LM1\s\LM0>", someone's mistake; +# removed "<smacs=\E^N>, <rmacs=\E^O>", which had been commented out in 8.3. +# Note, the !0 and !1 sequences in <rmcup>/<smcup>/<cnorm>/<civis> were +# previously \0410 and \0411 sequences...I don't *think* they were supposed +# to be 4-digit octal -- esr) +tek4113|tektronix 4113 color graphics with 5 line dialog area, + am, da, eo, + cols#80, lines#5, + clear=\ELZ, cub1=^H, cud1=^J, cuf1=\ELM1 \ELM0, + flash=\ERBA4\ERBA4\ERBA4\ERBA4\ERBA4\ERBA4\ERBA4\ERBA4\ERBA4\ERBA4\ERB0, + is2=\EKA1\ELL5\ELV0\ELV1, uc=\010\ELM1_\ELM0, +tek4113-34|tektronix 4113 color graphics with 34 line dialog area, + lines#34, + is2=\EKA1\ELLB2\ELV0\ELV1, use=tek4113, +# :ns: left off to allow vi visual mode. APL font (:as=\E^N:/:ae=\E^O:) not +# supported here. :uc: is slow, but looks nice. Suggest setenv MORE -up . +# :vb: needs enough delay to let you see the background color being toggled. +tek4113-nd|tektronix 4113 color graphics with no dialog area, + am, eo, + cols#80, it#8, lines#34, + clear=\E^L, cub1=^H, cud1=^J, cuf1=^I, cuu1=^K, + cvvis=\ELZ\EKA0, + flash=\ERBA4\ERBA4\ERBA4\ERBA4\ERBA4\ERBA4\ERBA4\ERBA4\ERBA4\ERBA4\ERB0, + home=\ELF7l\177 @, ht=^I, is2=\ELZ\EKA0\ELF7l\177 @, + ll=\ELF hl @, rmso=\EMT1, smso=\EMT2, uc=\010\EMG1_\EMG0, +# This entry is from Tek. Inc. (Brian Biehl) +# (tek4115: :bc: renamed to :le:, <rmam>/<smam> added based on init string -- esr) +otek4115|Tektronix 4115, + am, da, db, eo, + cols#80, it#8, lines#34, + cbt=\E[Z, clear=\E[H\E[2J, + cnorm=\E%!0\ELBG8\E%!1\E[34;1H, cub1=\E[D, cud1=\E[B, + cuf1=\E[C, cup=\E[%i%p1%d;%p2%dH, cuu1=\E[A, + cvvis=\E%!0\ELBB2\E%!1, dch1=\E[P, dl1=\E[M, ed=\E[J, + el=\E[K, home=\E[H, ht=^I, if=/usr/share/tabset/vt100, + il1=\E[L, + is2=\E%!0\E%\014\ELV0\EKA1\ELBB2\ENU@=\ELLB2\ELM0\ELV1\EKYA?\E%!1\E[<1l\E[?7h\E[?8h\E[34;1H\E[34B\E[m, + kbs=^H, ri=\EM, rmam=\E[?7l, + rmcup=\E%!0\ELBG8\E%!1\E[34;1H\E[J, rmir=\E[4l, + rmkx=\E>, rmso=\E[m, rmul=\E[m, sgr0=\E[m, smam=\E[?7h, + smcup=\E%!0\ELBB2\E%!1, smir=\E[4h, smkx=\E=, smso=\E[7m, + smul=\E[4m, +tek4115|newer tektronix 4115 entry with more ANSI capabilities, + am, xon, + cols#80, lines#34, + bel=^G, blink=\E[5m, bold=\E[1m, cbt=\E[Z, clear=\E[H\E[J, + cr=^M, cub=\E[%p1%dD, cub1=^H, cud=\E[%p1%dB, cud1=^J, + cuf=\E[%p1%dC, cuf1=\E[C, cup=\E[%i%p1%d;%p2%dH, + cuu=\E[%p1%dA, cuu1=\E[A, dch1=\E[P, dl=\E[%p1%dM, + dl1=\E[M, ed=\E[J, el=\E[K, home=\E[H, hpa=\E[%p1%{1}%+%dG, + ht=^I, hts=\EH, ich=\E[%p1%d@, ich1=\E[@, il=\E[%p1%dL, + il1=\E[L, ind=^J, invis=\E[8m, kbs=^H, kcub1=\E[D, + kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A, khome=\E[H, + rep=%p1%c\E[%p2%{1}%-%db, rev=\E[7m, rmam=\E[?7l, + rmso=\E[m, rmul=\E[m, + sgr=\E[%?%p1%t7;%;%?%p2%t4;%;%?%p3%t7;%;%?%p4%t5;%;%?%p6%t1;%;m, + sgr0=\E[m, smam=\E[?7h, smso=\E[7m, smul=\E[4m, tbc=\E[2g, + vpa=\E[%p1%{1}%+%dd, +# The tek4125 emulates a vt100 incorrectly - the scrolling region +# command is ignored. The following entry replaces <csr> with the needed +# <il>, <il>, and <smir>; removes some cursor pad commands that the tek4125 +# chokes on; and adds a lot of initialization for the tek dialog area. +# Note that this entry uses all 34 lines and sets the cursor color to green. +# Steve Jacobson 8/85 +# (tek4125: there were two "\!"s in the is that I replaced with "\E!"; +# commented out, <smir>=\E1 because there's no <rmir> -- esr) +tek4125|tektronix 4125, + lines#34, + csr@, dl1=\E[1M, il1=\E[1L, + is2=\E%\E!0\EQD1\EUX03\EKA\ELBB2\ELCE0\ELI100\ELJ2\ELLB2\ELM0\ELS1\ELX00\ELV1\E%\E!1\E>\E[?3l\E[?4l\E[?5l\E[?7h\E[?8h, + rc@, sc@, smkx=\E=, + use=vt100, + +# From: <jcoker@ucbic> +# (tek4207: This was the termcap file's entry for the 4107/4207, but SCO +# supplied another, less capable 4107 entry. So we'll use that for 4107 and +# note that if jcoker wasn't confused you may be able to use this one. +# I merged in <msgr>,<ind>,<ri>,<invis>,<tbc> from a BRL entry -- esr) +tek4207|Tektronix 4207 graphics terminal with memory, + am, bw, mir, msgr, ul, xenl, + cols#80, it#8, lines#32, + blink=\E[5m, bold=\E[1m, cbt=\E[Z, clear=\E[H\E[J$<156/>, + cub1=^H, cud1=^J, cuf1=\E[C, cup=\E[%i%p1%d;%p2%dH, + cuu1=\EM, dch1=\E[P$<4/>, dl1=\E[M$<3/>, ed=\E[J, + el=\E[K$<5/>, home=\E[H, ht=^I, ich1=\E[@$<4/>, + il1=\E[L$<3/>, ind=\E[S, invis=\E[=6;<5, + is2=\E%!0\ELBP0\E%!1\E[H\E[2g\EH\E[8C\EH\E[8C\EH\E[8C\EH\E[8C\EH\E[8C\EH\E[8C\EH\E[8C\EH\E[8C\EH\E[8C\EH\E[J, + kcub1=\E[D, kcud1=\ED, kcuf1=\E[C, kcuu1=\EM, khome=\E[H, + rev=\E[7m, ri=\E[T, + rmcup=\E[?6h\E%!0\ELBP0\E%!1\E[32;1f, rmso=\E[m, + rmul=\E[m, sgr0=\E[m, smcup=\E[?6l\E[H\E[J, smso=\E[7m, + smul=\E[4m, tbc=\E[1g, + +# From: <carolyn@dali.berkeley.edu> Thu Oct 31 12:54:27 1985 +# (tek4404: There was a "\!" in <smcup> that I replaced with "\E!". +# Tab had been given as \E2I,that must be the tab-set capability -- esr) +tek4404|tektronix 4404, + cols#80, it#8, lines#32, + blink=\E[5m, bold=\E[1m, clear=\E[H\E[2J, + csr=\E[%i%p1%d;%p2%dr, cub1=^H, cud1=^J, cuf1=\E[C, + cup=\E[%i%p1%d;%p2%dH, cuu1=\E[A, dch1=\E[P, dl1=\E[1M, + ed=\E[J, el=\E[K, home=\E[H, ht=^I, hts=\E[2I, il1=\E[1L, + kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A, rc=\E8, + rmcup=\E[1;1H\E[0J\E[?6h\E[?1l, rmir=\E[4l, + rmkx=\E[?1h, rmso=\E[27m, rmul=\E[m, sc=\E7, sgr0=\E[m, + smcup=\E%\E!1\E[1;32r\E[?6l\E>, smir=\E[4h, + smkx=\E[?1l, smso=\E[7m, smul=\E[4m, +# Some unknown person wrote: +# I added the is string - straight Unix has ESC ; in the login +# string which sets a ct8500 into monitor mode (aka 4025 snoopy +# mode). The is string here cleans up a few things (but not +# everything). +ct8500|tektronix ct8500, + am, bw, da, db, + cols#80, lines#25, + bel=^G, cbt=\E^I, clear=\E^E, cr=^M, cub1=^H, cud1=^J, + cuf1=\ES, cup=\E|%p1%{32}%+%c%p2%{32}%+%c, cuu1=\ER, + dch1=\E^], dl1=\E^M, ed=\E^U, el=\E^T, ht=^I, ich1=\E^\, + il1=\E^L, ind=^J, is2=\037\EZ\Ek, ri=\E^A, rmso=\E\s, + rmul=\E\s, sgr0=\E\s, smso=\E$, smul=\E!, + +# Tektronix 4205 terminal. +# +# am is not defined because the wrap around occurs not when the char. +# is placed in the 80'th column, but when we are attempting to type +# the 81'st character on the line. (esr: hmm, this is like the vt100 +# version of xenl, perhaps am + xenl would work!) +# +# Bold, dim, and standout are simulated by colors and thus not allowed +# with colors. The tektronix color table is mapped into the RGB color +# table by setf/setb. All colors are reset to factory specifications by oc. +# The <initc> cap uses RGB notation to define colors. for arguments 1-3 the +# interval (0-1000) is broken into 8 smaller sub-intervals (125). Each sub- +# interval then maps into pre-defined value. +tek4205|tektronix 4205, + ccc, mir, msgr, + colors#8, cols#80, it#8, lines#30, ncv#49, pairs#63, + acsc=``aaffggjjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~, + bel=^G, blink=\E[5m, bold=\E[=7;<4m, cbt=\E[Z, + clear=\E[2J\E[H, cr=^M, cub=\E[%p1%dD, cub1=\E[D, + cud=\E[%p1%dB, cud1=\E[B, cuf=\E[%p1%dC, cuf1=\E[C, + cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA, cuu1=\E[A, + dch1=\E[1P, dim=\E[=1;<6m, dl1=\E[1M, ech=\E%p1%dX, + ed=\E[J, el=\E[K, el1=\E[1K, enacs=\E)0, home=\E[H, ht=^I, + ich=\E[%p1%d@, il=\E[%p1%dL, il1=\E[1L, ind=\ED, + initc=\E%%!0\ETF4%?%p1%{0}%=%t0%e%p1%{1}%=%t4%e%p1%{2}%=%t3%e%p1%{3}%=%t5%e%p1%{4}%=%t2%e%p1%{5}%=%t6%e%p1%{6}%=%t7%e1%;%?%p2%{125}%<%t0%e%p2%{250}%<%tA2%e%p2%{375}%<%tA?%e%p2%{500}%<%tC8%e%p2%{625}%<%tD4%e%p2%{750}%<%tE1%e%p2%{875}%<%tE\:%eF4%;%?%p3%{125}%<%t0%e%p3%{250}%<%tA2%e%p3%{375}%<%tA?%e%p3%{500}%<%tC8%e%p3%{625}%<%tD4%e%p3%{750}%<%tE1%e%p3%{875}%<%tE\:%eF4%;%?%p4%{125}%<%t0%e%p4%{250}%<%tA2%e%p4%{375}%<%tA?%e%p4%{500}%<%tC8%e%p4%{625}%<%tD4%e%p4%{750}%<%tE1%e%p4%{875}%<%tE\:%eF4%;\E%%!1, + invis=\E[=6;<5, is1=\E%!0\ETM1\E%!1\E[m, kbs=^H, + kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A, kf0=\EOA, + kf1=\EOB, kf2=\EOC, kf3=\EOD, kf4=\EP, kf5=\EQ, kf6=\ER, + kf7=\ES, + oc=\E%!0\ETFB000001F4F4F42F40030F404A4C<F450F4F46F40F47F4F40\E%!1, + op=\E[39;40m, rev=\E[7m, ri=\EM, rmacs=^O, rmcup=, + rmir=\E[4l, rmso=\E[=0;<1m, rmul=\E[24m, + setb=\E[=%?%p1%{0}%=%t0m%e%p1%{1}%=%t4m%e%p1%{2}%=%t3m%e%p1%{3}%=%t5m%e%p1%{4}%=%t2m%e%p1%{5}%=%t6m%e%p1%{6}%=%t7m%e1m%;, + setf=\E[<%?%p1%{0}%=%t0m%e%p1%{1}%=%t4m%e%p1%{2}%=%t3m%e%p1%{3}%=%t5m%e%p1%{4}%=%t2m%e%p1%{5}%=%t6m%e%p1%{6}%=%t7m%e1m%;, + sgr0=\E[=0;<1m\E[24;25;27m\017, smacs=^N, + smcup=\E%%!1\E[?6l\E[2J, smir=\E[4h, smso=\E[=2;<3m, + smul=\E[4m, tbc=\E[1g, + +#### Teletype (tty) +# +# These are the hardcopy Teletypes from before AT&T bought the company, +# clattering electromechanical dinosaurs in Bakelite cases that printed on +# pulpy yellow roll paper. If you remember these you go back a ways. +# Teletype-branded VDTs are listed in the AT&T section. +# +# The earliest UNIXes were designed to use these clunkers; nroff and a few +# other programs still default to emitting codes for the Model 37. +# + +tty33|tty35|model 33 or 35 teletype, + hc, os, xon, + cols#72, + bel=^G, cr=^M, cud1=^J, ind=^J, +tty37|model 37 teletype, + hc, os, xon, + bel=^G, cr=^M, cub1=^H, cud1=^J, cuu1=\E7, hd=\E9, hu=\E8, + ind=^J, + +# There are known to be at least three flavors of the tty40, all seem more +# like IBM half duplex forms fillers than ASCII terminals. They have lots of +# awful braindamage, such as printing a visible newline indicator after each +# newline. The 40-1 is a half duplex terminal and is hopeless. The 40-2 is +# braindamaged but has hope and is described here. The 40-4 is a 3270 +# lookalike and beyond hope. The terminal has visible bell but I don't know +# it - it's null here to prevent it from showing the BL character. +# There is an \EG in <nl> because of a bug in old vi (if stty says you have +# a "newline" style terminal (-crmode) vi figures all it needs is nl +# to get crlf, even if <cr> is not ^M.) +# (tty40: removed obsolete ":nl=\EG\EB:", it's just do+cr -- esr) +tty40|ds40|ds40-2|dataspeed40|teletype dataspeed 40/2, + xon, + cols#80, lines#24, + clear=\EH$<20>\EJ$<80>, cr=\EG, cub1=^H, cud1=\EB, + cuf1=\EC, cuu1=\E7, dch1=\EP$<50>, dl1=\EM$<50>, + ed=\EJ$<75>, home=\EH$<10>, ht=\E@$<10>, hts=\E1, + ich1=\E\^$<50>, il1=\EL$<50>, ind=\ES$<20>, kbs=^], + kcub1=^H, mc4=^T, mc5=\022$<2000>, ri=\ET$<10>, rmso=\E4, + rs2=\023\ER$<60>, smso=\E3, tbc=\EH\E2$<80>, +tty43|model 43 teletype, + am, hc, os, xon, + cols#132, + bel=^G, cr=^M, cub1=^H, cud1=^J, ind=^J, kbs=^H, + +#### Tymshare +# + +# You can add <is2=\E<> to put this 40-column mode, though I can't +# for the life of me think why anyone would want to. +scanset|sc410|sc415|Tymshare Scan Set, + am, bw, msgr, + cols#80, lines#24, + acsc=j%k4l<m-q\,x5, bel=^G, clear=\EH\EJ, cr=^M, cub1=^H, + cud1=^J, cuf1=^I, cup=\EY%p1%{32}%+%c%p2%{32}%+%c, + cuu1=^K, ed=\EJ, el=\EK, home=\EH, ind=^J, kcub1=\ED, + kcud1=\EB, kcuf1=\EC, kcuu1=\EA, mc0=\E;3, mc4=\E;0, + mc5=\E;0, rc=^C, rmacs=^O, rs1=\E>, sc=^B, smacs=^N, + +#### Volker-Craig (vc) +# +# If you saw a Byte Magazine cover with a terminal on it during the early +# 1980s, it was probably one of these. Carl Helmers liked them because +# they could crank 19.2 and were cheap (that is, he liked them until he tried +# to program one...) +# + +# Missing in vc303a and vc303 descriptions: they scroll 2 lines at a time +# every other linefeed. +vc303|vc103|vc203|volker-craig 303, + am, + cols#80, lines#24, + bel=^G, clear=\014$<40>, cr=^M, cub1=^H, cud1=^J, cuf1=^I, + cuu1=^N, home=\013$<40>, kcub1=^H, kcud1=^J, kcuf1=^I, + kcuu1=^N, ll=\017$<1>W, +vc303a|vc403a|volker-craig 303a, + clear=\030$<40>, cuf1=^U, cuu1=^Z, el=\026$<20>, + home=\031$<40>, kcuf1=^U, kcuu1=^Z, ll=^P, use=vc303, +# (vc404: removed obsolete ":ma=^Z^P^U :" -- esr) +vc404|volker-craig 404, + am, + cols#80, lines#24, + bel=^G, clear=\030$<40>, cr=^M, cub1=^H, cud1=^J, cuf1=^U, + cup=\020%p1%{32}%+%c%p2%{32}%+%c, cuu1=^Z, + ed=\027$<40>, el=\026$<20>, home=\031$<40>, ind=^J, + kcub1=^H, kcud1=^J, kcuf1=^U, kcuu1=^Z, +vc404-s|volker-craig 404 w/standout mode, + cud1=^J, rmso=^O, smso=^N, use=vc404, +# From: <wolfgang@cs.sfu.ca> +# (vc414: merged in cup/dl1/home from an old vc414h-noxon) +vc414|vc414h|Volker-Craig 414H in sane escape mode., + am, + cols#80, lines#24, + clear=\E\034$<40>, cud1=\E^K, cuf1=^P, + cup=\E\021%p2%c%p1%c$<40>, cuu1=\E^L, dch1=\E3, + dl1=\E\023$<40>, ed=\E^X, el=\E\017$<10/>, home=\E^R, + ich1=\E\:, il1=\E\032$<40>, kcub1=^H, kcud1=\E^K, kcuf1=^P, + kcuu1=\E^L, kf0=\EA, kf1=\EB, kf2=\EC, kf3=\ED, kf4=\EE, + kf5=\EF, kf6=\EG, kf7=\EH, khome=\E^R, lf0=PF1, lf1=PF2, + lf2=PF3, lf3=PF4, lf4=PF5, lf5=PF6, lf6=PF7, lf7=PF8, + rmso=\E^_, smso=\E^Y, +vc415|volker-craig 415, + clear=^L, use=vc404, + +######## OBSOLETE PERSONAL-MICRO CONSOLES AND EMULATIONS +# + +#### IBM PC and clones +# + +# The pcplot IBM-PC terminal emulation program is really messed up. It is +# supposed to emulate a vt-100, but emulates the wraparound bug incorrectly, +# doesn't support scrolling regions, ignores add line commands, and ignores +# delete line commands. Consequently, the resulting behavior looks like a +# crude adm3a-type terminal. +# Steve Jacobson 8/85 +pcplot|pc-plot terminal emulation program, + xenl@, + csr@, dl@, dl1@, il@, il1@, rc@, sc@, use=vt100, +# KayPro II from Richard G Turner <rturner at Darcom-Hq.ARPA> +# I've found that my KayPro II, running MDM730, continues to emulate an +# ADM-3A terminal, just like I was running TERM.COM. On our 4.2 UNIX +# system the following termcap entry works well: +# I have noticed a couple of minor glitches, but nothing I can't work +# around. (I added two capabilities from the BRL entry -- esr) +kaypro|kaypro2|kaypro II, + am, + cols#80, lines#24, + bel=^G, clear=\032$<1/>, cr=^M, cud1=^J, cuf1=^L, + cup=\E=%p1%{32}%+%c%p2%{32}%+%c, cuu1=^K, dl1=\ER, ed=^W, + el=^X, home=^^, il1=\EE, ind=^J, kcud1=^J, kcuf1=^L, kcuu1=^K, + +# From IBM, Thu May 5 19:35:27 1983 +# (commented out <smir>=\200R because we don't know <rmir> -- esr) +ibm-pc|ibm5051|5051|IBM Personal Computer (no ANSI.SYS), + am, + cols#80, lines#24, + bel=^G, clear=^L^K, cr=^M^^, cub1=^], cud1=^J, cuf1=^\, + cuu1=^^, home=^K, ind=\n$<10>, kcud1=^_, + +ibmpc|wy60-PC|wyse60-PC|IBM PC/XT running PC/IX, + am, bw, eo, hs, km, msgr, ul, + cols#80, it#8, lines#24, + acsc=j\331k\277l\332m\300n\305q\304t\303u\264v\301w\302x\263, + bel=^G, blink=\E[5m, bold=\E[1m, clear=\Ec, cr=^M, + cub=\E[%p1%dD, cub1=\E[D, cud=\E[%p1%dB, cud1=\E[B, + cuf=\E[%p1%dC, cuf1=\E[C, cup=\E[%i%p1%d;%p2%dH, + cuu=\E[%p1%dA, cuu1=\E[A, ech=\E[%p1%dX, ed=\E[J, el=\E[K, + home=\E[H, hpa=\E[%i%p1%dG, ind=\E[S\E[B, + indn=\E[%p1%dS\E[%p1%dB, invis=\E[30;40m, kbs=^H, + kcbt=^], kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A, + kdch1=\177, kend=\E[Y, kf1=\240, kf10=\251, kf2=\241, + kf3=\242, kf4=\243, kf5=\244, kf6=\245, kf7=\246, kf8=\247, + kf9=\250, khome=\E[H, kich1=\E[^H, knp=\E[U, ll=\E[24;1H, + nel=^M, rev=\E[7m, ri=\E[T\E[A, rin=\E[%p1%dT\E[%p1%dA, + rmso=\E[m, rmul=\E[m, + sgr=\E[%?%p1%t;7%;%?%p2%t;4%;%?%p3%t;7%;%?%p4%t;5%;%?%p6%t;1%;m, + sgr0=\E[m, smso=\E[7m, smul=\E[4m, + +#### Apple II +# +# Apple II firmware console first, then various 80-column cards and +# terminal emulators. For two cents I'd toss all these in the UFO file +# along with the 40-column apple entries. +# + +# From: brsmith@umn-cs.cs.umn.edu (Brian R. Smith) via BRL +# 'it#8' tells UNIX that you have tabs every 8 columns. This is a +# function of TIC, not the firmware. +# The clear key on a IIgs will do something like clear-screen, +# depending on what you're in. +appleIIgs|appleIIe|appleIIc|Apple 80 column firmware interface, + am, bw, eo, msgr, + cols#80, it#8, lines#24, + bel=^G, clear=^L, cr=^M, cub1=^H, cud1=^J, cuf1=^\, + cup=\036%p2%{32}%+%c%p1%{32}%+%c, cuu1=^_, ed=^K, el=^], + home=^Y, ht=^I, ind=^W, kbs=^H, kclr=^X, kcub1=^H, kcud1=^J, + kcuf1=^U, kcuu1=^K, kdch1=\177, nel=^M^W, ri=^V, rmso=^N, + smso=^O, +# Apple //e with 80-column card, entry from BRL +# The modem interface is permitted to discard LF (maybe DC1), otherwise +# passing characters to the 80-column firmware via COUT (PR#3 assumed). +# Auto-wrap does not work right due to newline scrolling delay, which also +# requires that you set "stty cr2". +# Note: Cursor addressing is only available via the Pascal V1.1 entry, +# not via the BASIC PR#3 hook. All this nonsense can be avoided only by +# using a terminal emulation program instead of the built-in firmware. +apple2e|Apple //e, + bw, msgr, + cols#80, lines#24, + bel=^G, clear=\014$<100/>, cub1=^H, cud1=^J, cuu1=^_, + ed=\013$<4*/>, el=\035$<4/>, home=^Y, ht=^I, ind=^W, + is2=^R^N, kbs=^H, kcub1=^H, kcud1=^J, kcuf1=^U, kcuu1=^K, + nel=\r$<100/>, rev=^O, ri=^V, rmso=^N, rs1=^R^N, sgr0=^N, + smso=^O, +# mcvax!vu44!vu45!wilcke uses the "ap" entry together with Ascii Express Pro +# 4.20, with incoming and outgoing terminals both on 0, emulation On. +apple2e-p|Apple //e via Pascal, + cup=\036%p2%{32}%+%c%p1%{32}%+%c, kbs=^H, kcub1=^H, + kcud1=^J, + use=apple2e, +# (ASCII Express) MouseTalk "Standard Apple //" emulation from BRL +# Enable DC3/DC1 flow control with "stty ixon -ixany". +apple-ae|ASCII Express, + am, bw, msgr, nxon, xon, + cols#80, it#8, lines#24, + bel=\007$<500/>, clear=^L, cr=^M, cub1=^H, cud1=^J, cuf1=^U, + cup=\036%p2%{32}%+%c%p1%{32}%+%c, cuu1=^_, ed=^K, el=^], + home=^Y, ind=^W, is2=^R^N, kclr=^X, kcub1=^H, kcud1=^J, + kcuf1=^U, kcuu1=^K, rev=^O, ri=^V, rmso=^N, rs1=^R^N, sgr0=^N, + smso=^O, +appleII|apple ii plus, + am, + cols#80, it#8, lines#24, + clear=^L, cnorm=^TC2, cub1=^H, cud1=^J, cuf1=^\, + cup=\036%p2%{32}%+%c%p1%{32}%+%c, cuu1=^_, cvvis=^TC6, + ed=^K, el=^], flash=\024G1$<200/>\024T1, home=\E^Y, ht=^I, + is2=\024T1\016, kcud1=^J, kcuf1=^U, rmso=^N, sgr0=^N, + smso=^O, +# Originally by Gary Ford 21NOV83 +# From: <ee178aci%sdcc7@SDCSVAX.ARPA> Fri Oct 11 21:27:00 1985 +apple-80|apple II with smarterm 80 col, + am, bw, + cols#80, lines#24, + cbt=^R, clear=\014$<10*/>, cr=\r$<10*/>, cub1=^H, cud1=^J, + cuf1=^\, cup=\036%p2%{32}%+%c%p1%{32}%+%c, cuu1=^_, + ed=\013$<10*/>, el=\035$<10/>, home=^Y, +apple-soroc|apple emulating soroc 120, + am, + cols#80, lines#24, + bel=^G, clear=\E*$<300>, cr=^M, cub1=^H, cud1=^J, cuf1=^L, + cup=\E=%p1%{32}%+%c%p2%{32}%+%c, cuu1=^K, ed=\EY, el=\ET, + home=^^, ind=^J, kcub1=^H, kcud1=^J, kcuf1=^L, kcuu1=^K, +# From Peter Harrison, Computer Graphics Lab, San Francisco +# ucbvax!ucsfmis!harrison .....uucp +# ucbvax!ucsfmis!harrison@BERKELEY .......ARPA +# "These two work. If you don't have the inverse video chip for the +# Apple with videx then remove the :so: and :se: fields." +# (apple-videx: this used to be called DaleApple -- esr) +apple-videx|Apple with videx videoterm 80 column board with inverse video, + am, xenl, + cols#80, it#8, lines#24, + clear=\014$<300/>, cub1=^H, cud1=^J, cuf1=^\, + cup=\036%p2%{32}%+%c%p1%{32}%+%c, cuu1=^_, ed=^K, el=^], + home=^Y, ht=^I, kcub1=^H, kcud1=^J, kcuf1=^U, khome=^Y, + rmso=^Z2, sgr0=^Z2, smso=^Z3, +# My system [for reference] : Apple ][+, 64K, Ultraterm display card, +# Apple Cat ][ 212 modem, + more all +# controlled by ASCII Express: Pro. +# From Dave Shaver <isucs1!shaver> +apple-uterm-vb|Videx Ultraterm for Apple micros with Visible Bell, + am, eo, xt, + cols#80, lines#24, + acsc=, clear=^L, cuf1=^\, + cup=\036%p2%{32}%+%c%p1%{32}%+%c, cuu1=^_, ed=^K, el=^], + flash=^W35^W06, home=^Y, + is2=^V4^W06\017\rVisible Bell Installed.\016\r\n, + rmso=^N, smso=^O, +apple-uterm|Ultraterm for Apple micros, + am, eo, xt, + cols#80, lines#24, + acsc=, clear=^L, cuf1=^\, + cup=\036%p2%{32}%+%c%p1%{32}%+%c, cuu1=^_, ed=^K, el=^], + home=^Y, is2=^V4^W06\016, rmso=^N, smso=^O, +# from trwrba!bwong (Bradley W. Wong): +# +# This entry assumes that you are using an apple with the UCSD Pascal +# language card. SYSTEM.MISCINFO is assumed to be the same as that +# supplied with the standard apple except that screenwidth should be set +# using SETUP to 80 columns. Note that the right arrow in not mapped in +# this termcap entry. This is because that key, on the Apple, transmits +# a ^U and would thus preempt the more useful "up" function of vi. +# +# HMH 2/23/81 +apple80p|80-column apple with Pascal card, + am, bw, + cols#80, lines#24, + clear=^Y^L, cuf1=^\\:, + cup=\036%p2%{32}%+%c%p1%{32}%+%c, cuu1=^_, ed=^K, el=^], + home=^Y, kcub1=^H, +# +# Apple II+ equipped with Videx 80 column card +# +# Terminfo from ihnp4!ihu1g!djc1 (Dave Christensen) via BRL; +# manually converted by D A Gwyn +# +# DO NOT use any terminal emulation with this data base, it works directly +# with the Videx card. This has been tested with vi 1200 baud and works fine. +# +# This works great for vi, except I've noticed in pre-R2, ^U will scroll back +# 1 screen, while in R2 ^U doesn't. +# For inverse alternate character set add: +# <smacs>=^O:<rmacs>=^N: +# (apple-v: added it#8 -- esr) +apple-videx2|Apple II+ w/ Videx card (similar to Datamedia h1520), + am, xenl, + cols#80, it#8, lines#24, + bel=\007$<100/>, clear=\014$<16*/>, cr=^M, cub1=^H, + cud1=^J, cuf1=^\, cup=\036%p2%{32}%+%c%p1%{32}%+%c, + cuu1=^_, ed=\013$<16*/>, el=^], home=^Y, ht=\011$<8/>, + ind=^J, kbs=^H, kcub1=^H, kcud1=^J, kcuf1=^\, kcuu1=^_, + khome=^Y, rmso=^Z2, smso=^Z3, +apple-videx3|vapple|Apple II with 80 col card, + am, + cols#80, lines#24, + clear=\Ev, cuf1=\EC, cup=\EY%p1%{32}%+%c%p2%{32}%+%c, + cuu1=\EA, el=\Ex, home=\EH, kcub1=\ED, kcud1=\EB, kcuf1=\EC, + kcuu1=\EA, kf0=\EP, kf1=\EQ, kf2=\ER, kf3=\E\s, kf4=\E!, + kf5=\E", kf6=\E#, kf7=\E$, kf8=\E%, kf9=\E&, khome=\EH, +#From: decvax!cbosgd!cbdkc1!mww Mike Warren via BRL +aepro|Apple II+ running ASCII Express Pro--vt52, + cols#80, lines#24, + clear=\014$<300/>, cuf1=\EC, + cup=\EY%p1%{32}%+%c%p2%{32}%+%c, cuu1=\EA, ed=\EJ, + el=\EK, home=\EH, +# UCSD addition: Yet another termcap from Brian Kantor's Micro Munger Factory +apple-vm80|ap-vm80|apple with viewmax-80, + cols#80, lines#24, + clear=\014$<300/>, cuf1=^\\:, + cup=\036%p1%{32}%+%c%p2%{32}%+%c$<100/>, cuu1=^_, + ed=\013$<300/>, el=^], home=\031$<200/>, + +#### Apple Lisa & Macintosh +# + +# (lisa: changed <cvvis> to <cnorm> -- esr) +lisa|apple lisa console display (black on white), + am, eo, msgr, + cols#88, it#8, lines#32, + acsc=jdkclfmenbqattuvvuwsx`, civis=\E[5h, clear=^L, + cnorm=\E[5l, cub1=^H, cud1=\E[B, cuf1=\E[C, + cup=\E[%i%p1%d;%p2%dH, cuu1=\E[A, dch1=\E[P, dl1=\E[M, + ed=\E[J, el=\E[K, home=\E[H, ht=^I, ich1=\E[@, il1=\E[L, + is2=\E>\E[m\014, kbs=^H, kcub1=\E[D, kcud1=\E[B, + kcuf1=\E[C, kcuu1=\E[A, rmacs=\E[10m, rmso=\E[m, rmul=\E[m, + sgr0=\E[m, smacs=\E[11m, smso=\E[7m, smul=\E[4m, +liswb|apple lisa console display (white on black), + is2=\E>\E[0;7m\014, rmso=\E[0;7m, rmul=\E[0;7m, + smso=\E[m, smul=\E[4m, use=lisa, + +# lisaterm from ulysses!gamma!epsilon!mb2c!jed (John E. Duncan III) via BRL; +# <is2> revised by Ferd Brundick <fsbrn@BRL.ARPA> +# +# These entries assume that the 'Auto Wraparound' is enabled. +# Xon-Xoff flow control should also be enabled. +# +# The vt100 uses :rs2: and :rf: rather than :is2:/:tbc:/:hts: because the tab +# settings are in non-volatile memory and don't need to be reset upon login. +# Also setting the number of columns glitches the screen annoyingly. +# You can type "reset" to get them set. +# +lisaterm|Apple Lisa or Lisa/2 running LisaTerm vt100 emulation, + am, xenl, xon, + cols#80, it#8, lines#24, vt#3, + bel=^G, blink=\E[5m, bold=\E[1m, clear=\E[H\E[2J, cr=^M, + csr=\E[%i%p1%d;%p2%dr, cub=\E[%p1%dD, cub1=^H, + cud=\E[%p1%dB, cud1=^J, cuf=\E[%p1%dC, cuf1=\E[C, + cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA, cuu1=\E[A, ed=\E[J, + el=\E[K, home=\E[H, ht=^I, hts=\EH, ind=^J, kbs=^H, kcub1=\EOD, + kcud1=\EOB, kcuf1=\EOC, kcuu1=\EOA, kf0=\EOP, kf1=\EOQ, + kf2=\EOR, kf3=\EOS, lf0=F1, lf1=F2, lf2=F3, lf3=F4, rc=\E8, + rev=\E[7m, ri=\EM, rmkx=\E[?1l\E>, rmso=\E[m, rmul=\E[m, + rs1=\E>\E[?1l\E[?3l\E[?4l\E[?5l\E[?7h\E[?8h\E[1;24r, + sc=\E7, sgr0=\E[m, smkx=\E[?1h\E=, smso=\E[7m, smul=\E[4m, + tbc=\E[3g, +# Lisaterm in 132 column ("wide") mode. +lisaterm-w|Apple Lisa with Lisaterm in 132 column mode, + cols#132, + kbs=^H, kcub1=^H, kcud1=^J, use=lisaterm, +# Although MacTerminal has insert/delete line, it is commented out here +# since it is much faster and cleaner to use the "lock scrolling region" +# method of inserting and deleting lines due to the MacTerminal implementation. +# Also, the "Insert/delete ch" strings have an extra character appended to them +# due to a bug in MacTerminal V1.1. Blink is disabled since it is not +# supported by MacTerminal. +mac|macintosh|Macintosh with MacTerminal, + xenl, + blink@, dch1=\E[P$<7/>, ich1=\E[@$<9/>, ip=$<7/>, use=lisa, +# Lisaterm in 132 column ("wide") mode. +mac-w|macterminal-w|Apple Macintosh with Macterminal in 132 column mode, + cols#132, use=mac, + +#### Radio Shack/Tandy +# + +# (coco3: This had "ta" used incorrectly as a boolean and bl given as "bl#7". +# I read these as mistakes for ":it#8:" and ":bl=\007:" respectively -- esr) +# From: <{pbrown,ctl}@ocf.berkeley.edu> 12 Mar 90 +coco3|os9LII|Tandy CoCo3 24*80 OS9 Level II, + am, + cols#80, it#8, lines#24, + bel=^G, blink=^_", bold=\E\:^A, civis=^E\s, + clear=\014$<5*/>, cnorm=^E!, cub1=^H, cud1=^J, cuf1=^F, + cup=\002%p2%{32}%+%c%p1%{32}%+%c$<2/>, cuu1=^I, + dl1=^_1, ed=^K, el=^D, home=^A, il1=^_0, kcub1=^H, kcud1=^J, + kcuf1=^I, kcuu1=^L, rev=^_\s, rmso=^_!, rmul=^_#, + sgr0=\037!\E\:\0, smso=^_\s, smul=^_", +# (trs2: removed obsolete ":nl=^_:" -- esr) +trs2|trsII|trs80II|Radio Shack Model II using P&T CP/M, + am, msgr, + cols#80, it#8, lines#24, + bel=^G, clear=^L, cr=^M, cub1=^H, cud1=^_, cuf1=^], + cup=\EY%p1%{32}%+%c%p2%{32}%+%c, cuu1=^^, dl1=^K, ed=^B, + el=^A, home=^F, ht=^I, il1=^D, ind=^J, kbs=^H, kcub1=^\, + kcud1=^_, kcuf1=^], kcuu1=^^, rmso=^O, sgr0=^O, smso=^N, +# From: Kevin Braunsdorf <ksb@mentor.cc.purdue.edu> +# (This had extension capabilities +# :BN=\E[?33h:BF=\E[?33l:UC=\E[_ q:BC=\E[\177 q:\ +# :CN=\ERC:CF=\ERc:NR=\ERD:NM=\ER@: +# I also deleted the unnecessary ":kn#2:", ":sg#0:" -- esr) +trs16|trs-80 model 16 console, + am, + cols#80, it#8, lines#24, + acsc=jak`l_mbquvewcxs, bel=^G, civis=\ERc, clear=^L, + cnorm=\ERC, cr=^M, cub1=^H, cud1=\EB, cuf1=\EC, + cup=\EY%p1%{32}%+%c%p2%{32}%+%c, cuu1=\EA, dch1=\EQ, + dl1=\EM, ed=\EJ, el=\EK, home=\EH, ht=^I, ich1=\EP, il1=\EL, + ind=^J, kbs=^H, kcub1=\ED, kcud1=\EB, kcuf1=\EC, kcuu1=\EA, + kf0=^A, kf1=^B, kf2=^D, kf3=^L, kf4=^U, kf5=^P, kf6=^N, kf7=^S, + khome=^W, lf0=f1, lf1=f2, lf2=f3, lf3=f4, lf4=f5, lf5=f6, lf6=f7, + lf7=f8, mc4=\E]+, mc5=\E]=, rmacs=\ERg, rmso=\ER@, sgr0=\ER@, + smacs=\ERG, smso=\ERD, + +#### Atari ST +# + +# From: Simson L. Garfinkel <simsong@media-lab.mit.edu> +atari|atari st, + am, + cols#80, it#8, lines#25, + clear=\EH\EJ, cub1=\ED, cud1=\EB, cuf1=\EC, + cup=\EY%p1%{32}%+%c%p2%{32}%+%c, cuu1=\EA, dl1=\EM, + ed=\EJ, el=\EK, ht=^I, il1=\EL, kcub1=\ED, kcud1=\EB, + kcuf1=\EC, kcuu1=\EA, ri=\EI, rmso=\Eq, sgr0=\Eq, smso=\Ep, +# UniTerm terminal program for the Atari ST: 49-line VT220 emulation mode +# From: Paul M. Aoki <aoki@ucbvax.berkeley.edu> +uniterm|uniterm49|UniTerm VT220 emulator with 49 lines, + lines#49, + is2=\E>\E[?3l\E[?4l\E[?5l\E[?7h\E[?8h\E[1;49r\E[49;1H, use=vt220, +# MiNT VT52 emulation. 80 columns, 25 rows. +# MiNT is Now TOS, the operating system which comes with all Ataris now +# (mainly Atari Falcon). This termcap is for the VT52 emulation you get +# under tcsh/zsh/bash/sh/ksh/ash/csh when you run MiNT in `console' mode +# From: Per Persson <pp@gnu.ai.mit.edu>, 27 Feb 1996 +st52|Atari ST with VT52 emulation, + am, km, + cols#80, lines#25, + bel=^G, civis=\Ef, clear=\EH\EJ, cnorm=\Ee, cr=^M, cub1=\ED, + cud1=\EB, cuf1=\EC, cup=\EY%p1%{32}%+%c%p2%{32}%+%c, + cuu1=\EA, dl1=\EM, ed=\EJ, el=\EK, home=\EH, ht=^I, il1=\EL, + ind=^J, ka1=\E#7, ka3=\E#5, kb2=\E#9, kbs=^H, kc1=\E#1, + kc3=\E#3, kclr=\E#7, kcub1=\E#K, kcud1=\E#P, kcuf1=\E#M, + kcuu1=\E#H, kf0=\E#D, kf1=\E#;, kf2=\E#<, kf3=\E#=, kf4=\E#>, + kf5=\E#?, kf6=\E#@, kf7=\E#A, kf8=\E#B, kf9=\E#C, khome=\E#G, + kil1=\E#R, kind=\E#2, kri=\E#8, lf0=f10, nel=^M^J, rc=\Ek, + ri=\EI, rmcup=, rmso=\Eq, rs1=\Ez_\Eb@\EcA, sc=\Ej, sgr0=\Eq, + smcup=\Ee, smso=\Ep, + +#### Commodore Business Machines +# +# Formerly located in West Chester, PA; went spectacularly bust in 1994 +# after years of shaky engineering and egregious mismanagement. Made one +# really nice machine (the Amiga) and boatloads of nasty ones (PET, C-64, +# C-128, VIC-20). The C-64 is said to have been the most popular machine +# ever (most units sold); they can still be found gathering dust in closets +# everywhere. +# + +# From: Kent Polk <kent@swrinde.nde.swri.edu>, 30 May 90 +# Added a few more entries, converted caret-type control sequence (^x) entries +# to '\0xx' entries since a couple of people mentioned losing '^x' sequences. +# +# :as:, :ae: Support for alternate character sets. +# :ve=\E[\040p:vi=\E[\060\040p: cursor visible/invisible. +# :xn: vt100 kludginess at column 80/NEWLINE ignore after 80 cols(Concept) +# This one appears to fix a problem I always had with a line ending +# at 'width+1' (I think) followed by a blank line in vi. The blank +# line tended to disappear and reappear depending on how the screen +# was refreshed. Note that this is probably needed only if you use +# something like a Dnet Fterm with the window sized to some peculiar +# dimension larger than 80 columns. +# :k0=\E9~: map F10 to k0 - could have F0-9 -> k0-9, but ... F10 was 'k;' +# (amiga: removed obsolete :kn#10:, +# also added empty <acsc> to suppress a warning --esr) +amiga|Amiga ANSI, + am, bw, xenl, + cols#80, lines#24, + acsc=, bel=^G, blink=\E[7;2m, bold=\E[1m, cbt=\E[Z, + civis=\E[0 p, clear=\E[H\E[J, cnorm=\E[ p, cub=\E[%p1%dD, + cub1=\E[D, cud=\E[%p1%dB, cud1=\E[B, cuf=\E[%p1%dC, + cuf1=\E[C, cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA, + cuu1=\E[A, dch=\E[%p1%dP, dch1=\E[P, dim=\E[2m, + dl=\E[%p1%dM, dl1=\E[M, ed=\E[J, el=\E[K, home=\E[H, + ich=\E[%p1%d@, ich1=\E[@, il=\E[%p1%dL, il1=\E[L, ind=\E[S, + indn=\E[%p1%dS, invis=\E[8m, is2=\E[20l, kbs=^H, kcub1=\ED, + kcud1=\EB, kcuf1=\EC, kcuu1=\EA, kf0=\E9~, kf1=\E0~, + kf2=\E1~, kf3=\E2~, kf4=\E3~, kf5=\E4~, kf6=\E5~, kf7=\E6~, + kf8=\E7~, kf9=\E8~, rev=\E[7m, ri=\E[T, rin=\E[%p1%dT, + rmacs=^O, rmso=\E[m, rmul=\E[m, rs1=\Ec, sgr0=\E[m, smacs=^N, + smso=\E[7m, smul=\E[4m, + +# From: Hans Verkuil <hans@wyst.hobby.nl>, 4 Dec 1995 +# (amiga: added empty <acsc> to suppress a warning. +# I'm told this entry screws up badly with AS225, the Amiga +# TCP/IP package once from Commodore, and now sold by InterWorks.--esr) +amiga-h|Hans Verkuil's Amiga ANSI, + bw, msgr, + cols#80, lines#24, + acsc=, bel=^G, blink=\2337;2m, bold=\2331m, cbt=\233Z, + civis=\2330 p, clear=\233H\233J, cnorm=\233 p, cr=^M, + cub=\233%p1%dD, cub1=\233D, cud=\233%p1%dB, cud1=\233B, + cuf=\233%p1%dC, cuf1=\233C, cup=\233%i%p1%d;%p2%dH, + cuu=\233%p1%dA, cuu1=\233A, dch=\233%p1%dP, dch1=\233P, + dim=\2332m, ech=\233%p1%dP, ed=\233J, el=\233K, flash=^G, + home=\233H, ht=^I, ich=\233%p1%d@, ich1=\233@, ind=\233S, + indn=\233%p1%dS, invis=\2338m, is2=\23320l, kbs=^H, + kcub1=\233D, kcud1=\233B, kcuf1=\233C, kcuu1=\233A, + kdch1=\177, kf0=\2339~, kf1=\2330~, kf2=\2331~, kf3=\2332~, + kf4=\2333~, kf5=\2334~, kf6=\2335~, kf7=\2336~, kf8=\2337~, + kf9=\2338~, nel=\233B\r, rev=\2337m, ri=\233T, + rin=\233%p1%dT, rmacs=^O, rmcup=\233?7h, rmso=\2330m, + rmul=\2330m, rs1=\Ec, sgr0=\2330m, smacs=^N, smcup=\233?7l, + smso=\2337m, smul=\2334m, + +# Commodore B-128 microcomputer from Doug Tyrol <det@HEL-ACE.ARPA> +# I'm trying to write a termcap for a commodore b-128, and I'm +# having a little trouble. I've had to map most of my control characters +# to something that unix will accept (my delete-char is a ctrl-t, etc), +# and create some functions (like cm), but thats life. +# The problem is with the arrow keys - right, and up work fine, but +# left deletes the previous character and down I just can't figure out. +# Jove knows what I want, but I don't know what it's sending to me (it +# isn't thats bound to next-line in jove). +# Anybody got any ideas? Here's my termcap. +# DAG -- I changed his "^n" entries to "\n"; see if that works. +# +commodore|b-128|Commodore B-128 micro, + am, bw, + cols#80, lines#24, pb#150, + clear=\E\006$<10/>, cr=^M, cud1=^J, cuf1=^F, + cup=\E\013%p1%2d\,%p2%2d\,$<20/>, cuu1=^P, + dch1=\177$<10*/>, dl1=\Ed$<10*/>, el=\Eq$<10/>, + home=\E^E, ht=\011$<5/>, ich1=\E\n$<5/>, il1=\Ei$<10/>, + kcub1=^B, kcud1=^J, kcuf1=^F, kcuu1=^P, khome=\E^E, rmir=, + smir=, + +#### North Star +# +# North Star Advantage from Lt. Fickie <brl-ibd!fickie> via BRL +northstar|North Star Advantage, + cols#80, lines#24, + clear=\004$<200/>, + cup=\E=%p1%{32}%+%c%p2%{32}%+%c$<1/>, ed=\017$<200/>, + el=\016$<200/>, home=\034\032$<200/>, + +#### Osborne +# +# Thu Jul 7 03:55:16 1983 +# +# As an aside, be careful; it may sound like an anomaly on the +# Osborne, but with the 80-column upgrade, it's too easy to +# enter lines >80 columns! +# +# I've already had several comments... +# The Osborne-1 with the 80-col option is capable of being +# 52, 80, or 104 characters wide; default to 80 for compatibility +# with most systems. +# +# The tab is destructive on the Ozzie; make sure to 'stty -tabs'. +osborne-w|osborne1-w|osborne I in 104-column mode, + msgr, ul, xt, + cols#104, lines#24, + bel=^G, clear=^Z, cr=^M, cub1=^H, cud1=^J, cuf1=^L, + cup=\E=%p1%{32}%+%c%p2%{32}%+%c, cuu1=^K, dch1=\EW, + dl1=\ER, el=\ET, ich1=\EQ, il1=\EE, ind=^J, kcub1=^H, kcud1=^J, + kcuf1=^L, kcuu1=^K, rmso=\E(, rmul=\Em, smso=\E), smul=\El, +# Osborne I from ptsfa!rhc (Robert Cohen) via BRL +osborne|osborne1|osborne I in 80-column mode, + am, mir, msgr, ul, xhp, + cols#80, lines#24, + clear=^Z, cub1=\010$<4>, cud1=^J, cuf1=^L, + cup=\E=%p1%{32}%+%c%p2%{32}%+%c, cuu1=^K, + dch1=\EW$<4/>, dl1=\ER, el=\ET, il1=\EE, is2=^Z, kbs=^H, + kcub1=^H, kcud1=^J, kcuf1=^L, kcuu1=^K, rmir=, rmso=\E), + rmul=\Em, smir=\EQ, smso=\E(, smul=\El, +# +# Osborne Executive definition from BRL +# Similar to tvi920 +# Added by David Milligan and Tom Smith (SMU) +osexec|Osborne executive, + am, + cols#80, lines#24, xmc#1, + bel=^G, clear=^Z, cr=^M, cub1=^H, cud1=^J, cuf1=^L, + cup=\E=%p1%{32}%+%c%p2%{32}%+%c, cuu1=^K, dch1=\EW, + dl1=\ER, ed=\EY, el=\ET, home=^^, hts=\E1, ich1=\EQ, il1=\EE, + is2=\Eq\Ek\Em\EA\Ex0, kbs=^H, kcub1=^H, kcud1=^J, kcuf1=^L, + kcuu1=^K, kf0=^A@\r, kf1=^AA\r, kf2=^AB\r, kf3=^AC\r, + kf4=^AD\r, kf5=^AE\r, kf6=^AF\r, kf7=^AG\r, kf8=^AH\r, + kf9=^AI\r, rmir=, rmso=\Ek, rmul=\Em, smir=, smso=\Ej, + smul=\El, tbc=\E3, + +#### Console types for obsolete UNIX clones +# +# Coherent, Minix, Venix, and several lesser-known kin were OSs for 8088 +# machines that tried to emulate the UNIX look'n'feel. Coherent and Venix +# were commercial, Minix an educational tool sold in conjunction with a book. +# Memory-segmentation limits and a strong tendency to look like V7 long after +# it was obsolete made all three pretty lame. Venix croaked early. Coherent +# and Minix were ported to 32-bit Intel boxes, only to be run over by a +# steamroller named `Linux' (which, to be fair, traces some lineage to Minix). +# Coherent's vendor, the Mark Williams Company, went belly-up in 1994. There +# are also, I'm told, Minix ports that ran on Amiga and Atari machines and +# even as single processes under SunOS and the Macintosh OS. +# + +# This is the entry provided with minix 1.7.4, with bogus :ri: removed. +minix|minix console (v1.7), + am, xenl, + cols#80, it#8, lines#25, + bel=^G, blink=\E[5m, bold=\E[1m, clear=\E[H\E[0J, cr=^M, + cub=\E[%p1%dD, cub1=^H, cud=\E[%p1%dB, cud1=\E[B, + cuf=\E[%p1%dC, cuf1=\E[C, cup=\E[%i%p1%d;%p2%dH, + cuu=\E[%p1%dA, cuu1=\E[A, dch=\E[%p1%dP, dch1=\E[P, + dl=\E[%p1%dM, dl1=\E[M, ed=\E[0J, el=\E[K, home=\E[H, ht=^I, + ich=\E[%p1%d@, ich1=\E[@, il=\E[%p1%dL, il1=\E[L, ind=^J, + is2=\E[0m, kbs=^H, kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C, + kcuu1=\E[A, kf0=\E[Y, kf1=\E[V, kf2=\E[U, kf3=\E[T, kf4=\E[S, + kf5=\E[G, khome=\E[H, lf0=End, lf1=PgUp, lf2=PgDn, lf3=Num +, + lf4=Num -, lf5=Num 5, nel=^M^J, rev=\E[7m, ri=\EM, + rmso=\E[0m, rmul=\E[0m, sgr0=\E[0m, smso=\E[7m, smul=\E[4m, +# Corrected Jan 14, 1997 by Vincent Broman <broman@nosc.mil> +minix-old|minix console (v1.5), + xon, + cols#80, it#8, lines#25, + bel=^G, blink=\E[5m, bold=\E[1m, clear=\E[H\E[0J, cr=^M, + cub=\E[%p1%dD, cub1=^H, cud=\E[%p1%dB, cud1=\E[B, + cuf=\E[%p1%dC, cuf1=\E[C, cup=\E[%i%p1%d;%p2%dH, + cuu=\E[%p1%dA, cuu1=\E[A, dch=\E[%p1%dP, dch1=\E[P, + dl=\E[%p1%dM, dl1=\E[M, ed=\E[0J, el=\E[K, home=\E[H, ht=^I, + ich=\E[%p1%d@, ich1=\E[@, il=\E[%p1%dL, il1=\E[L, ind=^J, + kbs=^H, kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A, + kf0=\E[Y, kf1=\E[V, kf2=\E[U, kf3=\E[T, kf4=\E[S, kf5=\E[G, + khome=\E[H, nel=^M^J, rev=\E[7m, ri=\EM, rmso=\E[0m, + rmul=\E[0m, sgr0=\E[0m, smso=\E[7m, smul=\E[4m, +# The linewrap option can be specified by editing /usr/include/minix/config.h +# before recompiling the minix 1.5 kernel. +minix-old-am|minix console with linewrap, + am, use=minix-old, + +pc-minix|minix console on an Intel box, + use=klone+acs, use=minix, + +# According to the Coherent 2.3 manual, the PC console is similar +# to a z19. The differences seem to be (1) 25 lines, (2) no status +# line, (3) standout is broken, (4) ins/del line is broken, (5) +# has blinking and bold. +pc-coherent|pcz19|coherent|IBM PC console running Coherent, + am, mir, + cols#80, it#8, lines#25, + bel=^G, clear=\EE, cr=^M, cub1=^H, cud1=\EB, cuf1=\EC, + cup=\EY%p1%{32}%+%c%p2%{32}%+%c, cuu1=\EA, dch1=\EN, + ed=\EJ, el=\EK, home=\EH, ht=^I, ind=^J, kbs=^H, kcub1=\ED, + kcud1=\EB, kcuf1=\EC, kcuu1=\EA, khome=\EH, ri=\EI, rmir=\EO, + rmso=\Eq, sgr0=\Eq, smir=\E@, smso=\Ep, + +# According to the Venix 1.1 manual, the PC console is similar +# to a DEC vt52. Differences seem to be (1) arrow keys send +# different strings, (2) enhanced standout, (3) added insert/delete line. +# Note in particular that it doesn't have automatic margins. +# There are other keys (f1-f10, kpp, knp, kcbt, kich1, kdch1) but they +# not described here because this derives from an old termcap entry. +pc-venix|venix|IBM PC console running Venix, + cols#80, it#8, lines#25, + bel=^G, clear=\EH\EJ, cr=^M, cub1=^H, cud1=^J, cuf1=\EC, + cup=\EY%p1%{32}%+%c%p2%{32}%+%c, cuu1=\EA, dl1=\EM, + ed=\EJ, el=\EK, ht=^I, il1=\EL, ind=^J, kbs=^H, kcub1=\EK, + kcud1=\EP, kcuf1=\EM, kcuu1=\EH, khome=\EG, ri=\EI, + +#### Miscellaneous microcomputer consoles +# +# If you know anything more about any of these, please tell me. +# + +# The MAI Basic Four computer was obsolete at the end of the 1980s. +# It may be used as a terminal by putting it in "line" mode as seen on +# one of the status lines. +# Initialization is similar to CIT80. <is2> will set ANSI mode for you. +# Hardware tabs set by <if> at 8-spacing. Auto line wrap causes glitches so +# wrap mode is reset by <cvvis>. Using <ind>=\E[S caused errors so I +# used \ED instead. +# From: bf347@lafn.org (David Lawyer), 28 Jun 1997 +mai|basic4|MAI Basic Four in ansi mode, + am, da, db, mir, msgr, + cols#82, it#8, lines#25, + bel=^G, blink=\E[5m, bold=\E[1m, clear=^]^_, cnorm=\E[?7h, + cr=^M, csr=\E[%i%p1%d;%p2%dr, cub1=^H, cud1=^J, cuf1=^X, + cup=\E[%i%p1%d;%p2%dH, cuu1=^Z, cvvis=\E[?7l, dch1=\E[1P, + dl1=\E[M, ed=^_, el=^^, home=^], ht=^I, + if=/usr/lib/tabset/vt100, il1=\E[L, ind=\ED, + is2=\E>\E[?1h\E[?7h\E[?5l\017\E(B\E[m\E[20l\E[1;24r\E[24;1H, + kbs=^H, kcub1=\EOD, kcud1=\EOB, kcuf1=\EOC, kcuu1=\EOA, + kf1=\EOP, kf2=\EOQ, kf3=\EOR, kf4=\EOS, kf5=\EOT, kf6=\EOU, + kf7=\EOV, kf8=\EOW, nel=^M\ED, rc=\E8, rev=\E[7m, ri=\E[T, + rmir=\E[4l, rmso=\E[m, rmul=\E[m, sc=\E7, sgr0=\E[m, + smir=\E[4h, smso=\E[7m, smul=\E[4m, +# basis from Peter Harrison, Computer Graphics Lab, San Francisco +# ucbvax!ucsfmis!harrison ...uucp / ucbvax!ucsfmis!harrison@BERKELEY ...ARPA +# (basis: removed obsolete ":ma=^K^P^R^L^L :nl=5000*^J:" -- esr) +basis|BASIS108 computer with terminal translation table active, + clear=\E*$<300/>, cud1=\n$<5000/>, ed=\EY, el=\ET, kbs=^H, + kcub1=^H, kcud1=^J, kcuf1=^L, kcuu1=^K, rmso=\E), sgr0=\E), + smso=\E(, + use=adm3a, +# luna's BMC terminal emulator +luna|luna68k|LUNA68K Bitmap console, + cols#88, lines#46, use=ansi-mini, +megatek|pegasus workstation terminal emulator, + am, os, + cols#83, lines#60, +# The Xerox 820 was a Z80 micro with a snazzy XEROX PARC-derived +# interface (pre-Macintosh by several years) that went nowhere. +xerox820|x820|Xerox 820, + am, + cols#80, lines#24, + bel=^G, clear=1^Z, cr=^M, cub1=^H, cud1=^J, cuf1=^L, + cup=\E=%p1%{32}%+%c%p2%{32}%+%c, cuu1=^K, ed=^Q, el=^X, + home=^^, ind=^J, + +#### Videotex and teletext +# + +# \E\:1} switch to te'le'informatique mode (ascii terminal/ISO 6429) +# \E[?3l 80 columns +# \E[?4l scrolling on +# \E[12h local echo off +# \Ec reset: G0 U.S. charset (to get #,@,{,},...), 80 cols, clear screen +# \E)0 G1 DEC set (line graphics) +# +# From: Igor Tamitegama <igor@ppp1493-ft.teaser.fr>, 18 Jan 1997 +m2-nam|minitel|minitel-2|minitel-2-nam|France Telecom Minitel 2 mode te'le'informatique, + eslok, hs, xenl, + cols#80, it#8, lines#24, wsl#72, xmc#0, + acsc=aaffggjjkkllmmnnooqqssttuuvvwwxx, bel=^G, + blink=\E[5m, bold=\E[1m, civis=\E[<1h, clear=\E[H\E[J, + cnorm=\E[<1l, cr=^M, csr=\E[%i%p1%d;%p2%dr, + cub=\E[%p1%dD, cub1=\E[D, cud=\E[%p1%dB, cud1=\E[B, + cuf=\E[%p1%dC, cuf1=\E[C, cup=\E[%i%p1%d;%p2%dH, + cuu=\E[%p1%dA, cuu1=\E[A, dch=\E[%p1%dP, dch1=\E[P, + dl=\E[%p1%dM, dl1=\E[M, ed=\E[J, el=\E[K, flash=^G, fsl=^J, + home=\E[H, ht=^I, il=\E[%p1%dL, il1=\E[L, ind=^J, indn=^J, + ip=$<7/>, is1=\E\:1}\Ec\E[?4l\E[12h, is2=\Ec\E[12h\E)0, + is3=\E[?3l kbs=\010, kclr=\E[2J, kcub1=\E[D, kcud1=\E[B, + kcuf1=\E[C, kcuu1=\E[A, kdch1=\E[P, kdl1=\E[M, kf0=\EOp, + kf1=\EOq, kf10=\EOp, kf2=\EOr, kf3=\EOs, kf4=\EOt, kf5=\EOu, + kf6=\EOv, kf7=\EOw, kf8=\EOx, kf9=\EOy, khome=\E[H, + kich1=\E[4h, kil1=\E[4l, knp=\EOn, kpp=\EOR, ll=\E[24;80H, + mc0=\E[i, nel=^M^J, rc=\E8, rev=\E[7m, ri=\EM, rin=\EM, + rmacs=^O, rmir=\E[4l, rmso=\E[27m, rmul=\E[24m, + rs1=\Ec\E[?4l\E[12h, rs2=\Ec\E)0, sc=\E7, sgr0=\E[m, + smacs=^N, smir=\E[4h, smso=\E[7m, smul=\E[4m, tsl=^_@A, + u6=\E[%i%d;%dR, u7=\E[6n, + +# From: Alexandre Montaron <canal@mygale.org>, 18 Jun 1998 +# +minitel1|minitel 1, + am, bw, eslok, hs, hz, msgr, + colors#8, cols#40, lines#24, pairs#8, + acsc=+.\,\,./f0g1, bel=^G, blink=\EH, civis=^T, clear=^L, + cnorm=^Q, cr=^M, cub1=^H, cud1=^J, cuf1=^I, + cup=\037%p1%{65}%+%c%p2%{65}%+%c, cuu1=^K, el=^X, + enacs=^Y, fsl=^J, home=^^, ind=^J, + is2=\E;`ZQ\E\:iC\E\:iE\021, nel=^M^J, op=\EG, + rep=%p1%c\022%p2%{63}%+%c, rev=\E], ri=^K, rmso=\E\\, + setf=\E%?%p1%{1}%=%tD%e%p1%{3}%=%tF%e%p1%{4}%=%tA%e%p1%{6}%=%tC%e%p1%{64}%+%c%;, + sgr=%?%p1%t\E]%;%?%p3%t\E]%;%?%p4%t\EH%;, + sgr0=\EI\E\\, smso=\E], tsl=\037@%p1%{65}%+%c, +# is2=Fnct TE, Fnct MR, Fnct CM et pour finir: curseur ON. +minitel1b|minitel 1-bistandard (in 40cols mode), + mir, + cub=\E[%p1%dD, cud=\E[%p1%dB, cuf=\E[%p1%dC, + cuu=\E[%p1%dA, dch=\E[%p1%dP, dch1=\E[P, dl=\E[%p1%dM, + dl1=\E[M, ed=\E[J, el1=\E[1K, il=\E[%p1%dL, il1=\E[L, + is1=\E;iYA\E;jYC, kclr=\E[2J, kctab=^I, kcub1=\E[D, + kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A, kdch1=\E[P, kdl1=\E[M, + kel=^X, khome=\E[H, kich1=\E[4h, kil1=\E[L, rmir=\E[4l, + smir=\E[4h, smkx=\E;iYA\E;jYC, + use=minitel1, +# <rmkx> posait des problemes (logout en sortant de vi). +minitel1b-80|minitel 1-bistandard (standard teleinformatique), + am@, bw@, hz@, + colors@, cols#80, it#8, pairs@, + blink=\E[5m, bold=\E[1m, civis=\037@A\024\n, + clear=\E[H\E[2J, cnorm=\037@A\021\n, cuf1=\E[C, + cup=\E[%i%p1%d;%p2%dH, cuu1=\E[A, el=\E[K, home=\E[H, + ht=^I, ind=\ED, is1@, is2@, kent=\EOM, kf0=\EOp, kf1=\EOq, + kf2=\EOr, kf3=\EOs, kf4=\EOt, kf5=\EOu, kf6=\EOv, kf7=\EOw, + kf8=\EOx, kf9=\EOy, nel=\EE, op@, rc=\E8, rep@, rev=\E[7m, + ri=\EM, rmkx@, rmso=\E[27m, rmul=\E[24m, sc=\E7, setf@, + sgr=\E[%?%p1%t7;%;%?%p2%t4;%;%?%p3%t7;%;%?%p4%t5;%;%?%p6%t1;%;m, + sgr0=\E[m, smkx@, smso=\E[7m, smul=\E[4m, + use=minitel1b, + +######## OBSOLETE VDT TYPES +# +# These terminals are *long* dead -- these entries are retained for +# historical interest only. + +#### Amtek Business Machines +# + +# (abm80: early versions of this entry apparently had ":se=\E^_:so=\E^Y", +# but these caps were commented out in 8.3; also, removed overridden +# ":do=^J:" -- esr) +abm80|amtek business machines 80, + am, bw, + cols#80, lines#24, + cbt=^T, clear=\E^\, cub1=^H, cud1=\E^K, cuf1=^P, + cup=\E\021%p2%{32}%+%c%p1%{32}%+%c, cuu1=\E^L, + dl1=\E^S, ed=\E^X, el=\E^O, home=\E^R, il1=\E^Z, + +#### Bell Labs blit terminals +# +# These were AT&T's official entries. The 5620 FAQ maintained by +# David Breneman <daveb@dgtl.com> has this to say: +# +# Actually, in the beginning was the Jerq, and the Jerq was white with a +# green face, and Locanthi and Pike looked upon the Jerq and said the Jerq +# was good. But lo, upon the horizon loomed a mighty management-type person +# (known now only by the initials VP) who said, the mighty Jerq must stay +# alone, and could not go forth into the world. So Locanthi and Pike put the +# Jerq to sleep, cloned its parts, and the Blit was brought forth unto the +# world. And the Jerq lived the rest of its days in research, but never +# strayed from those paths. +# +# In all seriousness, the Blit was originally known as the Jerq, but when +# it started to be shown outside of the halls of the Bell Labs Research +# organization, the management powers that be decided that the name could +# not remain. So it was renamed to be Blit. This was in late 1981. +# +# (The AT&T 5620 was the commercialized Blit. Its successors were the 630, +# 730, and 730+.) +# + +blit|jerq|blit running teletype rom, + am, eo, ul, xon, + cols#87, it#8, lines#72, + bel=^G, clear=^L, cr=^M, cub1=\ED, cud1=^J, cuf1=\EC, + cup=\EY%p2%{32}%+%c%p1%{32}%+%c, cuu1=\EA, + dch=\Ee%p1%{32}%+%c, dch1=\Ee!, dl=\EE%p1%{32}%+%c, + dl1=\EE!, el=\EK, ht=^I, ich=\Ef%p1%{32}%+%c, ich1=\Ef!, + il=\EF%p1%{32}%+%c, il1=\EF!, ind=^J, kbs=^H, kcub1=\ED, + kcud1=\EB, kcuf1=\EC, kcuu1=\EA, kf1=\Ex, kf2=\Ey, kf3=\Ez, + +# (cbblit: here's a BSD termcap that says <cud1=\EG> -- esr) +cbblit|fixterm|blit running columbus code, + cols#88, + ed=\EJ, flash=\E^G, ich1@, mc4=^T, mc5=^R, mc5p=\EP%p1%03d, + rmir=\ER, rmso=\EV!, rmul=\EV", smir=\EQ, smso=\EU!, + smul=\EU", + use=blit, + +oblit|ojerq|first version of blit rom, + am, da, db, eo, mir, ul, xon, + cols#88, it#8, lines#72, + bel=^G, clear=^L, cr=^M, cub1=\ED, cud1=^J, cuf1=\EC, + cup=\EY%p2%{32}%+%c%p1%{32}%+%c, cuu1=\EA, dch1=\EO, + dl=\Ee%p1%{32}%+%c, dl1=\EE, ed=\EJ, el=\EK, flash=\E^G, + ht=^I, il=\Ef%p1%{32}%+%c, il1=\EF, ind=^J, kbs=^H, rmir=\ER, + smir=\EQ, + +#### Bolt, Beranek & Newman (bbn) +# +# The BitGraph was a product of the now-defunct BBN Computer Corporation. +# The parent company, best known as the architects of the Internet, is +# still around. +# +# Jeff DelPapa <dp@world.std.com> writes: +# The bitgraph was a large white box that contained a monochrome bitmap +# display, and a 68000 to run it. You could download code and run it on +# the cpu, it had 128kb (I think) of memory. I used one in the late +# 70's, sure beat a vt100. It had one strange feature tho -- it used +# the cpu to bitblt pixels to scroll, it took longer than the refresh +# rate, and looked like a rubber sheet stretching, then snapping +# upwards. It had everything the early mac had, except a floppy drive a +# small screen (it had a 17" crisp beauty) and a real OS. They (Bolt +# Beranek and Neuman) sold at most a few hundred of them to the real +# world. DOD may have bought more... +# + +# Entries for the BitGraph terminals. The problem +# with scrolling in vi can only be fixed by getting BBN to put +# smarter scroll logic in the terminal or changing vi or padding +# scrolls with about 500 ms delay. +# +# I always thought the problem was related to the terminal +# counting newlines in its input buffer before scrolling and +# then moving the screen that much. Then vi comes along and +# paints lines in on the bottom line of the screen, so you get +# this big white gap. + +bitgraph|bg2.0nv|bg3.10nv|bbn bitgraph 2.0 or later (normal video), + flash=\E[?5h$<200/>\E[?5l, is2=\E>\E[?5l\E[?7h, + use=bg2.0, +bg2.0rv|bg3.10rv|bbn bitgraph 2.0 (reverse video), + flash=\E[?5l$<200/>\E[?5h, is2=\E>\E[?5h\E[?7h, + use=bg2.0, +bg2.0|bg3.10|bbn bitgraph 2.0 or later (no init), + xenl, + cols#85, lines#64, + bel=^G, clear=\E[H\E[J$<150>, cr=^M, + csr=\E[%i%p1%d;%p2%dr, cub1=^H, cud1=\E[B, cuf1=\E[C, + cup=%i\E[%p1%d;%p2%dH, cuu1=\E[A, dl1=\E[M$<2*>, + ed=\E[J$<150>, el=\E[K$<2>, ht=^I, il1=\E[L$<2*>, + ind=\n$<280>, kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C, + kcuu1=\E[A, kf1=\EOP, kf2=\EOQ, kf3=\EOR, kf4=\EOS, lf1=PF1, + lf2=PF2, lf3=PF3, lf4=PF4, rc=\E8, rmkx=\E>, rmso=\E[m, sc=\E7, + sgr0=\E[m, smkx=\E=, smso=\E[7m, + +bg1.25rv|bbn bitgraph 1.25 (reverse video), + flash=\E[?5l$<200/>\E[?5h, is2=\E>\E[?5h\E[?7h, use=bg1.25, +bg1.25nv|bbn bitgraph 1.25 (normal video), + flash=\E[?5h$<200/>\E[?5l, is2=\E>\E[?5l\E[?7h, use=bg1.25, +# (bg1.25: I added <rmam>/<smam> based on the init string -- esr) +bg1.25|bbn bitgraph 1.25, + cols#85, lines#64, + bel=^G, clear=\E[H\E[J$<150>, cr=^M, cub1=^H, cud1=\E[B, + cuf1=\E[C, cup=%i\E[%p1%d;%p2%dH, cuu1=\E[A, + dl1=\E[M$<2*>, ed=\E[J$<150>, el=\E[K$<2>, ht=^I, + il1=\E[L$<2*>, ind=\n$<280>, kcub1=\ED, kcud1=\EB, + kcuf1=\EC, kcuu1=\EA, kf1=\EP, kf2=\EQ, kf3=\ER, kf4=\ES, + lf1=PF1, lf2=PF2, lf3=PF3, lf4=PF4, ll=\E[64;1H, rmam=\E[?7l, + rmkx=\E>, rmso=\E[m, sgr0=\E[m, smam=\E[?7h, smkx=\E=, + smso=\E[7m, + +#### Chromatics +# + +# I have put the long strings in <smcup>/<rmcup>. Ti sets up a window +# that is smaller than the screen, and puts up a warning message +# outside the window. Te erases the warning message, puts the +# window back to be the whole screen, and puts the cursor at just +# below the small window. I defined <cnorm> and <civis> to really turn +# the cursor on and off, but I have taken this out since I don't +# like the cursor being turned off when vi exits. +cg7900|chromatics|chromatics 7900, + am, + cols#80, lines#40, + bel=^G, clear=^L, cr=^M, cub1=^H, cud1=^J, cuf1=^], + cup=\001M%p2%d\,%p1%d\,, cuu1=^K, dch1=^A<1, dl1=^A<2, + ed=^Al, el=^A`, home=^\, ich1=^A>1, il1=^A>2, ind=^J, ll=^A|, + rmcup=\001W0\,40\,85\,48\,\014\001W0\,0\,85\,48\,\001M0\,40\,, + rmso=\001C1\,\001c2\,, + smcup=\001P0\001O1\001R1\001C4\,\001c0\,\014\001M0\,42\,WARNING DOUBLE ENTER ESCAPE and \025\001C1\,\001c2\,\001W0\,0\,79\,39\,, + smso=\001C4\,\001c7\,, uc=\001\001_\001\0, + +#### Computer Automation +# + +ca22851|computer automation 22851, + am, + cols#80, lines#24, + bel=^G, clear=\014$<8>, cr=^M, cub1=^U, cud1=^J, cuf1=^I, + cup=\002%i%p1%c%p2%c, cuu1=^V, ed=^\, el=^], home=^^, ind=^J, + kcub1=^U, kcud1=^W, kcuu1=^V, khome=^^, + +#### Cybernex +# + +# This entry has correct padding and the undocumented "ri" capability +cyb83|xl83|cybernex xl-83, + am, + cols#80, lines#24, + bel=^G, clear=\014$<62>, cr=^M, cub1=^H, cud1=^J, cuf1=^I, + cup=\027%p1%{32}%+%c%p2%{32}%+%c, cuu1=^N, + ed=\020$<62>, el=\017$<3>, home=^K, ind=^J, kcub1=^H, + kcud1=^J, kcuf1=^I, kcuu1=^N, ri=^N, +# (mdl110: removed obsolete ":ma=^Z^P:" and overridden ":cd=145^NA^W:" -- esr) +cyb110|mdl110|cybernex mdl-110, + am, + cols#80, lines#24, + bel=^G, clear=\030$<70>, cr=^M, cub1=^H, cud1=^J, cuf1=^U, + cup=\020%p1%{32}%+%c%p2%{32}%+%c, cuu1=^Z, + dch1=\016A\036$<3.5>, dl1=\016A\016\036$<40>, + ed=\016@\026$<6>, el=\016@\026$<145>, home=^Y, + ht=\011$<43>, ich1=\016A\035$<3.5>, + il1=\016A\016\035$<65>, ind=^J, rmso=^NG, smso=^NF, + +#### Datapoint +# +# Datapoint is gone. They used to be headquartered in Texas. +# They created ARCnet, an Ethernet competitor that flourished for a while +# in the early 1980s before 3COM got wise and cut its prices. The service +# side of Datapoint still lives (1995) in the form of Intelogic Trace. +# + +dp3360|datapoint|datapoint 3360, + am, + cols#82, lines#25, + bel=^G, clear=^]^_, cr=^M, cub1=^H, cud1=^J, cuf1=^X, cuu1=^Z, + ed=^_, el=^^, home=^], ind=^J, + +# From: Jan Willem Stumpel <jw.stumpel@inter.nl.net>, 11 May 1997 +# The Datapoint 8242 Workstation was sold at least between 1985 +# and 1989. To make the terminal work with this entry, press +# CONTROL-INT-INT to take the terminal off-line, and type (opt). +# Set the options AUTO ROLL, ROLL DN, and ESC KBD on, and AUTO +# CR/LF off. Use control-shift-[] as escape key, control-I as tab, +# shift-F1 to shift-F5 as F6 to F10 (unshifted F1 to F5 are in +# fact unusable because the strings sent by the terminal conflict +# with other keys). +# The terminal is capable of displaying "box draw" characters. +# For each graphic character you must send 2 ESC's (\E\E) followed +# by a control character as follows: +# character meaning +# ========= ======= +# ctrl-E top tee +# ctrl-F right tee +# ctrl-G bottom tee +# ctrl-H left tee +# ctrl-I cross +# ctrl-J top left corner +# ctrl-K top right corner +# ctrl-L bottom left corner +# ctrl-M bottom right corner +# ctrl-N horizontal line +# ctrl-O vertical line +# Unfortunately this cannot be fitted into the termcap/terminfo +# description scheme. +dp8242|datapoint 8242, + msgr, + cols#80, lines#25, + bel=^G, civis=^Y, clear=\025\E\004\027\030, cnorm=^X, + cr=^M, cub1=^H, cud1=^J, + cup=\011%p2%'\0'%+%c%p1%'\0'%+%c, dl1=\E^Z, ed=^W, el=^V, + home=^U, ht=^I, il1=\E^T, ind=^C, + is1=\E\014\E\016\0\230\0\317\025\027\030\E\004, + kbs=^H, kcub1=^D, kcud1=^B, kcuf1=^F, kcuu1=^E, kf1=^G\Ee, + kf10=\EK\Ea, kf2=^I\Ed, kf3=^J\Ec, kf4=^J\Eb, kf5=^S\Ea, + kf6=\EO\Ee, kf7=\EN\Ed, kf8=\EM\Ec, kf9=\EL\Eb, nel=^M^J, + rep=\E\023%p1%c%p2%c, ri=^K, rmso=\E^D, rmul=\E^D, + rs1=\E\014\E\016\0\230\0\317\025\027\030\E\004, + smso=\E^E, smul=\E^F, + wind=\E\014\E\016%p1%'\0'%+%c%p2%'\0'%+%c%p3%'\0'%+%c%p4%'\0'%+%c\025, + +#### DEC terminals (Obsolete types: DECwriter and vt40/42/50) +# +# These entries are DEC's official terminfos for its older terminals. +# Contact Bill Hedberg <hedberg@hannah.enet.dec.com> of Terminal Support +# Engineering for more information. Updated terminfos and termcaps +# are kept available at ftp://gatekeeper.dec.com/pub/DEC/termcaps. +# + +gt40|dec gt40, + os, + cols#72, lines#30, + bel=^G, cr=^M, cub1=^H, cud1=^J, +gt42|dec gt42, + os, + cols#72, lines#40, + bel=^G, cr=^M, cub1=^H, cud1=^J, +vt50|dec vt50, + cols#80, lines#12, + bel=^G, clear=\EH\EJ, cr=^M, cub1=^H, cud1=^J, cuf1=\EC, + cuu1=\EA, ed=\EJ, el=\EK, ht=^I, ind=^J, +vt50h|dec vt50h, + cols#80, lines#12, + bel=^G, clear=\EH\EJ, cr=^M, cub1=^H, cud1=^J, cuf1=\EC, + cup=\EY%p1%{32}%+%c%p2%{32}%+%c, cuu1=\EA, ed=\EJ, + el=\EK, ht=^I, ind=^J, ri=\EI, +# (vt61: there's a BSD termcap that claims <dl1=\EPd>, <il1=\EPf.> <kbs=^H>) +vt61|vt-61|vt61.5|dec vt61, + cols#80, lines#24, + bel=^G, clear=\EH\EJ$<120>, cr=\r$<20>, cub1=^H, cud1=^J, + cuf1=\EC$<20>, cup=\EY%p1%{32}%+%c%p2%{32}%+%c$<20>, + cuu1=\EA$<20>, ed=\EJ$<120>, el=\EK$<70>, ht=^I, + ind=\n$<20>, kcub1=\ED, kcud1=\EB, kcuf1=\EC, kcuu1=\EA, + ri=\E$<20>I, + +# The gigi does standout with red! +# (gigi: I added <rmam>/<smam> based on the init string, corrected cub1 -- esr) +gigi|vk100|dec gigi graphics terminal, + am, xenl, + cols#84, lines#24, + bel=^G, clear=\E[H\E[2J, cr=^M, cub=\E[%p1%dD, cub1=^H, + cud=\E[%p1%dB, cud1=^J, cuf=\E[%p1%dC, cuf1=\E[C, + cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA, cuu1=\E[A, ed=\E[J, + el=\E[K, ht=^I, ind=^J, + is2=\E>\E[?3l\E[?4l\E[?5l\E[?20l\E[?7h\E[?8h, + kcub1=\EOD, kcud1=\EOB, kcuf1=\EOC, kcuu1=\EOA, kf1=\EOP, + kf2=\EOQ, kf3=\EOR, kf4=\EOS, khome=\E[H, ri=\EM, + rmam=\E[?7l, rmkx=\E[?1l\E>, rmso=\E[m, rmul=\E[m, + sgr0=\E[m, smam=\E[?7h, smkx=\E[?1h\E=, smso=\E[7;31m, + smul=\E[4m, + +# DEC PRO-350 console (VT220-style). The 350 was DEC's attempt to produce +# a PC differentiated from the IBM clones. It was a total, ludicrous, +# grossly-overpriced failure (among other things, DEC's OS didn't include +# a format program, so you had to buy pre-formatted floppies from DEC at +# a hefty premium!). +pro350|decpro|dec pro console, + cols#80, it#8, lines#24, + acsc=``aaffggjjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~, + clear=\EH\EJ, cub1=^H, cud1=\EB, cuf1=\EC, + cup=\EY%p1%{32}%+%c%p2%{32}%+%c, cuu1=\EA, ed=\EJ, + el=\EK, home=\EH, ht=^I, kcub1=\ED, kcud1=\EB, kcuf1=\EC, + kcuu1=\EA, kf0=\EE, kf1=\EF, kf2=\EG, kf3=\EH, kf4=\EI, + kf5=\EJ, kf6=\Ei, kf7=\Ej, khome=\EH, ri=\EI, rmacs=\EG, + rmso=\E^N, rmul=\E^C, smacs=\EF, smso=\E^H, smul=\E^D, + +dw1|decwriter I, + hc, os, + cols#72, + bel=^G, cr=^M, cub1=^H, cud1=^J, ind=^J, +dw2|decwriter|dw|decwriter II, + hc, os, + cols#132, + bel=^G, cr=^M, cub1=^H, cud1=^J, ind=^J, kbs=^H, +# \E(B Use U.S. character set (otherwise # => british pound !) +# \E[20l Disable "linefeed newline" mode (else puts \r after \n,\f,\v) +# \E[w 10 char/in pitch +# \E[1;132 full width horizontal margins +# \E[2g clear all tab stops +# \E[z 6 lines/in +# \E[66t 66 lines/page (for \f) +# \E[1;66r full vertical page can be printed +# \E[4g clear vertical tab stops +# \E> disable alternate keypad mode (so it transmits numbers!) +# \E[%i%p1%du set tab stop at column %d (origin == 1) +# (Full syntax is \E[n;n;n;n;n;...;nu where each 'n' is +# a tab stop) +# +# The dw3 does standout with wide characters. +# +dw3|la120|decwriter III, + hc, os, + cols#132, + bel=^G, cr=^M, cub1=^H, cud1=^J, ht=^I, ind=^J, + is1=\E(B\E[20l\E[w\E[0;132s\E[2g\E[z\E[66t\E[1;66r\E[4g\E>, + is2=\E[9;17;25;33;41;49;57;65;73;81;89;97;105;113;121;129u\r, + kbs=^H, rmso=\E[w, sgr0=\E[w, smso=\E[6w, +dw4|decwriter IV, + am, hc, os, + cols#132, + bel=^G, cr=^M, cub1=^H, cud1=^J, ht=^I, ind=^J, is2=\Ec, kbs=^H, + kf0=\EOP, kf1=\EOQ, kf2=\EOR, kf3=\EOS, + +# These aren't official +ln03|dec ln03 laser printer, + hc, + cols#80, lines#66, + bel=^G, cr=^M, cud1=^J, hd=\EK, ht=^I, hu=\EL, ind=^J, nel=^M^J, + rmso=\E[22m, rmul=\E[24m, sgr0=\E[m, smso=\E[1m, + smul=\E[4m, +ln03-w|dec ln03 laser printer 132 cols, + cols#132, + bel=^G, cr=^M, cud1=^J, ht=^I, ind=^J, kbs=^H, kcub1=^H, + kcud1=^J, nel=^M^J, + use=ln03, + +#### Delta Data (dd) +# + +# Untested. The cup sequence is hairy enough that it probably needs work. +# The idea is ctrl(O), dd(row), dd(col), where dd(x) is x - 2*(x%16) + '9'. +# There are BSD-derived termcap entries floating around for this puppy +# that are *certainly* wrong. +delta|dd5000|delta data 5000, + am, + cols#80, lines#27, + bel=^G, clear=^NR, cub1=^H, cud1=^J, cuf1=^Y, + cup=\017%p1%p1%{16}%m%{2}%*%-%{57}%+%c%p2%p2%{16}%m%{2}%*%-%{57}%+%c, + cuu1=^Z, dch1=^NV, el=^NU, home=^NQ, ind=^J, + +#### Digital Data Research (ddr) +# + +# (ddr: I added <rmam>/<smam> based on the init string -- esr) +ddr|rebus3180|ddr3180|Rebus/DDR 3180 vt100 emulator, + am, xenl, + cols#80, it#8, lines#24, vt#3, + blink=\E[5m$<2/>, bold=\E[1m$<2/>, + clear=\E[H\E[2J$<50/>, csr=\E[%i%p1%d;%p2%dr, cub1=^H, + cud1=^J, cuf1=\E[C$<2/>, cup=\E[%i%p1%d;%p2%dH$<5/>, + cuu1=\E[A$<2/>, ed=\E[J$<50/>, el=\E[K$<3/>, home=\E[H, + ht=^I, ind=\ED$<5/>, is2=\E[1;24r\E[24;1H, kbs=^H, + kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A, kf1=\EOP, + kf2=\EOQ, kf3=\EOR, kf4=\EOS, rc=\E8, rev=\E[7m$<2/>, + rf=/usr/share/tabset/vt100, ri=\EM$<5/>, rmam=\E[7l, + rmkx=\E[?1l\E>, rmso=\E[m, rmul=\E[m$<2/>, + rs1=\E>\E[?3l\E[?4l\E[?5l\E[?7h\E[?8h, sc=\E7, + sgr0=\E[m$<2/>, smam=\E[7l, smkx=\E[?1h\E=, smso=\E[7m, + smul=\E[4m$<2/>, + +#### Evans & Sutherland +# + +# Jon Leech <leech@cs.unc.edu> tells us: +# The ps300 was the Evans & Sutherland Picture System 300, a high +# performance 3D vector graphics system with a bunch of specialized hardware. +# Approximate date of release was 1982 (early 80s, anyway), and it had several +# evolutions including (limited) color versions such as the PS330C. PS300s +# were effectively obsolete by the late 80s, replaced by raster graphics +# systems, although specialized applications like molecular modelling +# hung onto them for a while longer. AFAIK all E&S vector graphics systems +# are out of production, though of course E&S is very much alive (in 1996). +# (ps300: changed ":pt@:" to "it@" -- esr) +# +ps300|Picture System 300, + xt, + it@, + rmso@, rmul@, smso@, smul@, use=vt100, + +#### General Electric (ge) +# + +terminet1200|terminet300|tn1200|tn300|terminet|GE terminet 1200, + hc, os, + cols#120, + bel=^G, cr=^M, cud1=^J, ind=^J, + +#### Heathkit/Zenith +# + +# Here is a description of the H19 DIP switches: +# +# S401 +# 0-3 = baud rate as follows: +# +# 3 2 1 0 +# --- --- --- --- +# 0 0 1 1 300 baud +# 0 1 0 1 1200 baud +# 1 0 0 0 2400 baud +# 1 0 1 0 4800 baud +# 1 1 0 0 9600 baud +# 1 1 0 1 19.2K baud +# +# 4 = parity (0 = no parity) +# 5 = even parity (0 = odd parity) +# 6 = stick parity (0 = normal parity) +# 7 = full duplex (0 = half duplex) +# +# S402 +# 0 = block cursor (0 = underscore cursor) +# 1 = no key click (0 = keyclick) +# 2 = wrap at end of line (0 = no wrap) +# 3 = auto LF on CR (0 = no LF on CR) +# 4 = auto CR on LF (0 = no CR on LF) +# 5 = ANSI mode (0 = VT52 mode) +# 6 = keypad shifted (0 = keypad unshifted) +# 7 = 50Hz refresh (1 = 60Hz refresh) +# +# Factory Default settings are as follows: +# 7 6 5 4 3 2 1 0 +# S401 1 0 0 0 1 1 0 0 +# S402 0 0 0 0 0 0 0 0 +# (h19: I added <rmam>/<smam> based on the init string; +# also added empty <acsc> to suppress a tic warning -- esr) +h19-a|h19a|heath-ansi|heathkit-a|heathkit h19 ansi mode, + am, mir, msgr, + cols#80, it#8, lines#24, + acsc=, bel=^G, clear=\E[2J, cnorm=\E[>4l, cr=^M, cub1=^H, + cud1=\E[1B, cuf1=\E[1C, cup=\E[%i%p1%d;%p2%dH, + cuu1=\E[1A, cvvis=\E[>4h, dch1=\E[1P, dl1=\E[1M$<1*>, + ed=\E[J, el=\E[K, home=\E[H, ht=^I, il1=\E[1L$<1*>, ind=^J, + is2=\E<\E[>1;2;3;4;5;6;7;8;9l\E[m\E[11m\E[?7h, + kbs=^H, kcub1=\E[1D, kcud1=\E[1B, kcuf1=\E[1C, kcuu1=\E[1A, + kf1=\EOS, kf2=\EOT, kf3=\EOU, kf4=\EOV, kf5=\EOW, kf6=\EOP, + kf7=\EOQ, kf8=\EOR, khome=\E[H, lf6=blue, lf7=red, lf8=white, + ri=\EM, rmacs=\E[11m, rmam=\E[?7l, rmir=\E[4l, rmso=\E[m, + smacs=\E[10m, smam=\E[?7h, smir=\E[4h, smso=\E[7m, +h19-bs|heathkit w/keypad shifted, + rmkx=\Eu, smkx=\Et, use=h19-b, +h19-us|h19us|h19-smul|heathkit w/keypad shifted/underscore cursor, + rmkx=\Eu, smkx=\Et, + use=h19-u, +# (h19: merged in <ip> from BSDI hp19-e entry>; +# also added empty <acsc> to suppress a tic warning --esr) +# From: Tim Pierce <twp@skepsis.com>, 23 Feb 1998 +# Tim tells us that: +# I have an old Zenith-19 terminal at home that still gets a lot of use. +# This terminal suffers from the same famous insert-mode padding lossage +# that has been acknowledged for the Z29 terminal. Emacs is nearly +# unusable on this box, since even a half-scroll up or down the window +# causes flaming terminal death. +# +# On the Z19, the only way I have found around this problem is to remove +# the :al: and :dl: entries entirely. No amount of extra padding will +# help (I have tried up to 20000). Removing <il1=\EL$> and <dl1=\EM$> +# makes Emacs a little slower, but it remains in the land of the living. +# Big win. +h19|heath|h19-b|heathkit|heath-19|z19|zenith|heathkit h19, + am, eslok, hs, mir, msgr, + cols#80, it#8, lines#24, + acsc=, bel=^G, clear=\EE, cnorm=\Ey4, cr=^M, cub1=^H, cud1=\EB, + cuf1=\EC, cup=\EY%p1%{32}%+%c%p2%{32}%+%c, cuu1=\EA, + cvvis=\Ex4, dch1=\EN, ed=\EJ, el=\EK, fsl=\Ek\Ey5, home=\EH, + ht=^I, ind=^J, ip=<1.5/>, kbs=^H, kcub1=\ED, kcud1=\EB, + kcuf1=\EC, kcuu1=\EA, kf1=\ES, kf2=\ET, kf3=\EU, kf4=\EV, + kf5=\EW, kf6=\EP, kf7=\EQ, kf8=\ER, khome=\EH, lf6=blue, + lf7=red, lf8=white, ri=\EI, rmacs=\EG, rmir=\EO, rmso=\Eq, + smacs=\EF, smir=\E@, smso=\Ep, + tsl=\Ej\Ex5\EY8%p1%{32}%+%c\Eo\Eo, +h19-u|heathkit with underscore cursor, + cnorm@, cvvis@, use=h19-b, +h19-g|h19g|heathkit w/block cursor, + cnorm=\Ex4, use=h19-b, +alto-h19|altoh19|altoheath|alto-heath|alto emulating heathkit h19, + lines#60, + dl1=\EM, il1=\EL, use=h19, + +# The major problem with the Z29 is that it requires more padding than the Z19. +# +# The problem with declaring an H19 to be synonymous with a Z29 is that +# it needs more padding. It especially loses if a program attempts +# to put the Z29 into insert mode and insert text at 9600 baud. It +# even loses worse if the program attempts to insert tabs at 9600 +# baud. Adding padding to text that is inserted loses because in +# order to make the Z29 not die, one must add so much padding that +# whenever the program tries to use insert mode, the effective +# rate is about 110 baud. +# +# What program would want to put the terminal into insert mode +# and shove stuff at it at 9600 baud you ask? +# +# Emacs. Emacs seems to want to do the mathematically optimal +# thing in doing a redisplay rather than the practical thing. +# When it is about to output a line on top of a line that is +# already on the screen, instead of just killing to the end of +# the line and outputting the new line, it compares the old line +# and the new line and if there are any similarities, it +# constructs the new line by deleting the text on the old line +# on the terminal that is already there and then inserting new +# text into the line to transform it into the new line that is +# to be displayed. The Z29 does not react kindly to this. +# +# But don't cry for too long.... There is a solution. You can make +# a termcap entry for the Z29 that says the Z29 has no insert mode. +# Then Emacs cannot use it. "Oh, no, but now inserting into a +# line will be really slow", you say. Well there is a sort of a +# solution to that too. There is an insert character option on +# the Z29 that will insert one character. Unfortunately, it +# involves putting the terminal into ansi mode, inserting the +# character, and changing it back to H19 mode. All this takes 12 +# characters. Pretty expensive to insert one character, but it +# works. Either Emacs doesn't try to use its inserting hack when +# it's only given an insert character ability or the Z29 doesn't +# require padding with this (the former is probably more likely, +# but I haven't checked it out). +# (z29: added empty <acsc> to suppress a tic warning, merged in +# status line capabilities from BRL entry --esr) +z29|zenith29|z29b|zenith z29b, + am, eslok, hs, mir, msgr, + cols#80, lines#24, + acsc=, bel=^G, cbt=\E-, clear=\EE$<14>, cnorm=\Ey4, cr=^M, + cub1=^H, cud1=\EB, cuf1=\EC, + cup=\EY%p1%{32}%+%c%p2%{32}%+%c, cuu1=\E$<1>A, + cvvis=\Ex4, dch1=\EN$<0.1*>, dl1=\EM$<1/>, dsl=\Ey1, + ed=\EJ$<14>, el=\EK$<1>, fsl=\Ek\Ey5, home=\EH, ht=^I, + ich1=\E<\E[1@\E[?2h$<1>, il1=\EL$<1/>, ind=\n$<2>, + is2=\E<\E[?2h\Ev, kbs=^H, kcub1=\ED, kcud1=\EB, kcuf1=\EC, + kcuu1=\EA, kf0=\E~, kf1=\ES, kf2=\ET, kf3=\EU, kf4=\EV, + kf5=\EW, kf6=\EP, kf7=\EQ, kf8=\ER, kf9=\E0I, khome=\EH, + lf0=home, ri=\EI$<2/>, rmacs=\EF, rmir=\EO, rmso=\Eq, + rmul=\Es0, smacs=\EG, smir=\E@, smso=\Ep, smul=\Es8, + tsl=\Ej\Ex5\Ex1\EY8%+ \Eo, +# z29 in ansi mode. Assumes that the cursor is in the correct state, and that +# the world is stable. <rs1> causes the terminal to be reset to the state +# indicated by the name. kc -> key click, nkc -> no key click, uc -> underscore +# cursor, bc -> block cursor. +# From: Mike Meyers +# (z29a: replaced nonexistent <if=/usr/share/tabset/zenith29> befause <hts> +# looks vt100-compatible -- esr) +z29a|z29a-kc-bc|h29a-kc-bc|heath/zenith 29 in ansi mode, + am, eslok, hs, mir, msgr, + cols#80, it#8, lines#24, + bel=^G, blink=\E[5m, bold=\E[2m, clear=\E[2J, cr=^M, + csr=\E[%i%p1%d;%p2%dr, cub=\E[%p1%dD, cub1=^H, + cud=\E[%p1%dB, cud1=^J, cuf=\E[%p1%dC, cuf1=\E[C, + cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA, cuu1=\E[A, + dch=\E[%p1%dP, dch1=\E[1P, dim=\E[2m, dl=\E[%p1%dM, + dsl=\E[>1l, ed=\E[J, el=\E[K, fsl=\E[u\E[>5l, home=\E[H, + ht=^I, hts=\EH, if=/usr/share/tabset/vt100, il=\E[%p1%dL, + ind=\ED, kbs=^H, kclr=\E[J, kcub1=\EOD, kcud1=\EOB, + kcuf1=\EOC, kcuu1=\EOA, ked=\E[J, kf0=\E[~, kf1=\EOS, + kf2=\EOT, kf3=\EOU, kf4=\EOV, kf5=\EOW, kf6=\EOP, kf7=\EOQ, + kf8=\EOR, kf9=\EOX, khome=\E[H, lf0=help, mc0=\E#7, + nel=^M\ED, rc=\E[r, rev=\E[7m, ri=\EM, rmcup=\E[?7h, + rmso=\E[m, rmul=\E[m, + rs1=\E<\E[1;24r\E[24;1H\E[?7h\E[>4h\E[>1;2;3;5;6;7;8;9l\E[m\E[11m, + sc=\E[s, sgr0=\E[m, smcup=\E[?7l, smso=\E[7;2m, smul=\E[4m, + tbc=\E[3g, tsl=\E[s\E[>5;1h\E[25;%i%dH\E[1K, +z29a-kc-uc|h29a-kc-uc|z29 ansi mode with keyckick and underscore cursor, + rs1=\E<\E[1;24r\E[24;1H\E[?7h\E[>1;2;3;4;5;6;7;8;9l\E[m\E[11m, + use=z29a, +z29a-nkc-bc|h29a-nkc-bc|z29 ansi mode with block cursor and no keyclick, + rs1=\E<\E[1;24r\E[24;1H\E[?7h\E[>2;4h\E[>1;3;5;6;7;8;9l\E[m\E[11m, + use=z29a, +z29a-nkc-uc|h29a-nkc-uc|z29 ansi mode with underscore cursor and no keyclick, + rs1=\E<\E[1;24r\E[24;1H\E[?7h\E[>2h\E[>1;3;4;5;6;7;8;9l\E[m\E[11m, + use=z29a, +# From: Jeff Bartig <jeffb@dont.doit.wisc.edu> 31 Mar 1995 +z39-a|z39a|zenith39-a|zenith39-ansi|Zenith 39 in ANSI mode, + am, eslok, hs, mc5i, mir, msgr, xon, + cols#80, lines#24, + acsc=0a``aaffggjjkkllmmnnooqqssttuuvvwwxx~~, bel=^G, + blink=\E[5m, bold=\E[1m, cbt=\E[1Z, civis=\E[>5h, + clear=\E[2J\E[H, cnorm=\E[>5l, cr=^M, + csr=\E[%i%p1%d;%p2%dr, cub=\E[%p1%dD, cub1=^H, + cud=\E[%p1%dB, cud1=\E[B, cuf=\E[%p1%dC, cuf1=\E[C, + cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA, cuu1=\E[A, + dch=\E[%p1%dP, dch1=\E[1P, dim=\E[2m, dl=\E[%p1%dM, + dl1=\E[1M, dsl=\E[>1l, ed=\E[0J, el=\E[0K, el1=\E[1K, + fsl=\E[u, home=\E[H, ht=^I, hts=\EH, il=\E[%p1%dL, il1=\E[1L, + ind=^J, is2=\E<\E[>1;3;5;6;7l\E[0m\E[2J, ka1=\EOw, + ka3=\EOu, kb2=\EOy, kbs=^H, kc1=\EOq, kc3=\EOs, kcub1=\E[D, + kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A, ked=\E[J, kf1=\EOS, + kf2=\EOT, kf3=\EOU, kf4=\EOV, kf5=\EOW, kf6=\EOP, kf7=\EOQ, + kf8=\EOR, kf9=\EOX, khlp=\E[~, khome=\E[H, ll=\E[24;1H, + mc0=\E[?19h\E[i, mc4=\E[4i, mc5=\E[5i, rc=\E[u, rev=\E[7m, + rmacs=\E(B, rmir=\E[4l, rmkx=\E[>7l, rmso=\E[0m, + rmul=\E[0m, rs2=\E<\Ec\0, sc=\E[s, sgr0=\E[0m, smacs=\E(0, + smir=\E[4h, smkx=\E[>7h, smso=\E[7m, smul=\E[4m, tbc=\E[3g, + tsl=\E[s\E[>1h\E[25;%i%p1%dH, + +# From: Brad Brahms <Brahms@USC-ECLC> +z100|h100|z110|z-100|h-100|heath/zenith z-100 pc with color monitor, + cnorm=\Ey4\Em70, cvvis=\Ex4\Em71, + use=z100bw, +# (z100bw: removed obsolete ":kn#10:", added empty <acsc> -- esr) +z100bw|h100bw|z110bw|z-100bw|h-100bw|heath/zenith z-100 pc, + mir, msgr, + cols#80, it#8, lines#24, + acsc=, clear=\EE$<5*/>, cnorm=\Ey4, cub1=^H, cud1=\EB, + cuf1=\EC, cup=\EY%p1%{32}%+%c%p2%{32}%+%c$<1*/>, + cuu1=\EA, cvvis=\Ex4, dch1=\EN$<1*/>, dl1=\EM$<5*/>, + ed=\EJ, el=\EK, home=\EH, ht=^I, il1=\EL$<5*/>, kbs=^H, + kcub1=\ED, kcud1=\EB, kcuf1=\EC, kcuu1=\EA, kf0=\EJ, kf1=\ES, + kf2=\ET, kf3=\EU, kf4=\EV, kf5=\EW, kf6=\EP, kf7=\EQ, kf8=\ER, + kf9=\EOI, khome=\EH, ri=\EI, rmacs=\EG, rmir=\EO, rmso=\Eq, + smacs=\EF, smir=\E@, smso=\Ep, +p19|h19-b with il1/dl1, + dl1=\EM$<2*/>, il1=\EL$<2*/>, use=h19-b, +# From: <ucscc!B.fiatlux@ucbvax.berkeley.edu> +# (ztx: removed duplicate :sr: -- esr) +ztx|ztx11|zt-1|htx11|ztx-1-a|ztx-10 or 11, + am, eslok, hs, + cols#80, it#8, lines#24, + clear=\EE, cub1=^H, cud1=^J, cuf1=\EC, + cup=\EY%p1%{32}%+%c%p2%{32}%+%c, cuu1=\EA, dl1=\EM, + dsl=\Ey1, ed=\EJ, el=\EK, fsl=\Ek\Ey5, home=\EH, ht=^I, + il1=\EL, is2=\Ej\EH\Eq\Ek\Ev\Ey1\Ey5\EG\Ey8\Ey9\Ey>, + kbs=^H, kcub1=\ED, kcud1=\EB, kcuf1=\EC, kcuu1=\EA, kf0=\ES, + kf1=\EB, kf2=\EU, kf3=\EV, kf4=\EW, kf5=\EP, kf6=\EQ, kf7=\ER, + ri=\EI, rmso=\Eq, rmul=\Eq, smso=\Es5, smul=\Es2, + tsl=\Ej\Ex5\Ex1\EY8%+ \Eo, + +#### IMS International (ims) +# +# There was a company called IMS International located in Carson City, +# Nevada, that flourished from the mid-70s to mid-80s. They made S-100 +# bus/Z80 hardware and a line of terminals called Ultimas. +# + +# From: Erik Fair <fair@ucbarpa.berkeley.edu> Sun Oct 27 07:21:05 1985 +ims950-b|bare ims950 no init string, + is2@, use=ims950, +# (ims950: removed obsolete ":ko@:" -- esr) +ims950|ims televideo 950 emulation, + xenl@, + flash@, kbs@, kcub1@, kcud1@, kcuf1@, kcuu1@, kf0@, kf1@, kf2@, kf3@, + kf4@, kf5@, kf6@, kf7@, kf8@, kf9@, khome@, + use=tvi950, +# (ims950-rv: removed obsolete ":ko@:" -- esr) +ims950-rv|ims tvi950 rev video, + xenl@, + flash@, kbs@, kcub1@, kcud1@, kcuf1@, kcuu1@, kf0@, kf1@, kf2@, kf3@, + kf4@, kf5@, kf6@, kf7@, kf8@, kf9@, khome@, + use=tvi950-rv, +ims-ansi|ultima2|ultimaII|IMS Ultima II, + am, + cols#80, it#8, lines#24, + clear=\E[H\E[2J, cub1=^H, cud1=\ED, + cup=\E[%i%p1%2d;%p2%2dH, cuu1=\EM, ed=\E[0J, el=\E[0K, + ht=^I, if=/usr/share/tabset/vt100, + is2=\E[m\E[>14l\E[?1;?5;20l\E>\E[1m\r, kcub1=\E[D, + kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A, khome=\E[H, ri=\EM, + rmso=\E[m\E[1m, rmul=\E[m\E[1m, sgr0=\E[m, smso=\E[7m, + smul=\E[4m, + +#### Intertec Data Systems +# +# I think this company is long dead as of 1995. They made an early CP/M +# micro called the "Intertec Superbrain" that was moderately popular, +# then sank out of sight. +# + +superbrain|intertec superbrain, + am, bw, + cols#80, lines#24, + bel=^G, clear=\014$<5*>, cr=^M, cub1=^H, cud1=^J, cuf1=^F, + cup=\EY%p1%{32}%+%c%p2%{32}%+%c$<20>, cuu1=^K, + ed=\E~k<10*>, el=\E~K$<15>, ht=^I, ind=^J, kcub1=^U, + kcud1=^J, kcuf1=^F, kcuu1=^K, rmcup=^L, smcup=^L, +# (intertube: a Gould entry via BRL asserted smul=\E0@$<200/>, +# rmul=\E0A$<200/>; my guess is the highlight letter is bit-coded like an ADM, +# and the reverse is actually true. Try it. -- esr) +intertube|intertec|Intertec InterTube, + am, + cols#80, lines#25, + bel=^G, clear=^L, cr=^M, cub1=^H, cud1=^J, cuf1=^F, + cup=\EY%p1%{32}%+%c%p2%{32}%+%c$<50>, cuu1=^Z, home=^A, + ind=^J, rmso=\E0@, smso=\E0P, +# The intertube 2 has the "full duplex" problem like the tek 4025: if you +# are typing and a command comes in, the keystrokes you type get interspersed +# with the command and it messes up +intertube2|intertec data systems intertube 2, + cup=\016%p1%c\020%p2%{10}%/%{16}%*%p2%{10}%m%+%c, + el=\EK, hpa=\020%p1%{10}%/%{16}%*%p1%{10}%m%+%c, + ll=^K^X\r, vpa=\013%p1%c, + use=intertube, + +#### Ithaca Intersystems +# +# This company made S100-bus personal computers long ago in the pre-IBM-PC +# past. They used to be reachable at: +# +# Ithaca Intersystems +# 1650 Hanshaw Road +# Ithaca, New York 14850 +# +# However, the outfit went bankrupt years ago. +# + +# The Graphos III was a color graphics terminal from Ithaca Intersystems. +# These entries were written (originally in termcap syntax) by Brian Yandell +# <yandell@stat.wisc.edu> and Mike Meyer <mikem@stat.wisc.edu> at the +# University of Wisconsin. + +# (graphos: removed obsolete and syntactically incorrect :kn=4:, +# removed <if=/usr/share/tabset/init.graphos> and +# <rf=/usr/share/tabset/init.graphos> no such file & no <hts> -- esr) +graphos|graphos III, + am, mir, + cols#80, it#8, lines#24, + clear=\E[H\E[2J, cnorm=\Ez56;2;0;0z\Ez73z\Ez4;1;1z, + cr=^M, cub=\E[%p1%dD, cub1=^H, cud=\E[%p1%dB, cud1=\E[B, + cuf=\E[%p1%dC, cuf1=\E[C, cup=\E[%i%p1%d;%p2%dH, + cuu=\E[%p1%dA, cuu1=\E[A, + cvvis=\Ez4;2;1z\Ez56;2;80;24z, dch1=\E[P, dl=\E[%p1%dM, + dl1=\E[M, ed=\E[J, el=\E[K, home=\E[H, ht=^I, il=\E[%p1%dL, + il1=\E[L, ind=\ED, kbs=^H, kcub1=\E[D, kcud1=\E[B, + kcuf1=\E[C, kcuu1=\E[A, kf1=\EOP, kf2=\EOQ, kf3=\EOR, + kf4=\EOS, khome=\E[H, nel=^M\ED, rc=\E8, ri=\EM, rmdc=\E[4l, + rmir=\E[4l, rmso=\E[m, sc=\E7, sgr0=\E[m, smdc=\E[4h, + smir=\E[4h, smso=\E[7m, +graphos-30|graphos III with 30 lines, + lines#30, + cvvis=\Ez4;2;1z\Ez56;2;80;30z, use=graphos, + +#### Modgraph +# +# These people used to be reachable at: +# +# Modgraph, Inc +# 1393 Main Street, +# Waltham, MA 02154 +# Vox: (617)-890-5796. +# +# However, if you call that number today you'll get an insurance company. +# I have mail from "Michael Berman, V.P. Sales, Modgraph" dated +# 26 Feb 1997 that says: +# +# Modgraph GX-1000, replaced by GX-2000. Both are out of production, have been +# for ~7 years. Modgraph still in business. Products are rugged laptop and +# portable PC's and specialized CRT and LCD monitors (rugged, rack-mount +# panel-mount etc). I can be emailed at sonfour@aol.com +# +# Peter D. Smith <pdsmith@nbbn.com> notes that his modgraph manual was +# dated 1984. According to the manual, it featured Tek 4010/4014 +# graphics and DEC VT100/VT52 + ADM-3A emulation with a VT220-style keyboard. +# + +modgraph|mod24|modgraph terminal emulating vt100, + xenl@, + cols#80, lines#24, + cvvis=\E\^9;0s\E\^7;1s, + is2=\E\^9;0s\E\^7;1s\E[3g\E\^11;9s\E\^11;17s\E\^11;25s\E\^11;33s\E\^11;41s\E\^11;49s\E\^11;57s\E\^11;65s\E\^11;73s\E\^11;81s\E\^11;89s, + rf@, ri=\EM\E[K$<5/>, + use=vt100, +# The GX-1000 manual is dated 1984. This looks rather like a VT-52. +modgraph2|modgraph gx-1000 80x24 with keypad not enabled, + am, da, db, + cols#80, it#8, lines#24, + clear=\EH\EJ$<50/>, cub1=^H, cuf1=\EC$<2/>, + cup=\EY%p1%{32}%+%c%p2%{32}%+%c$<5/>, cuu1=\EA$<2/>, + ed=\EJ$<50/>, el=\EK$<3/>, ht=^I, + is2=\E<\E\^5;2s\E\^7;1s\E[3g\E\^11;9s\E\^11;17s\E\^11;25s\E\^11;33s\E\^11;41s\E\^11;49s\E\^11;57s\E\^11;65s\E\^11;73s\E\^11;81s\E\^11;89s\E\^12;0s\E\^14;2s\E\^15;9s\E\^25;1s\E\^9;1s\E\^27;1, + ri=\EI$<5/>, +# +# Modgraph from Nancy L. Cider <nancyc@brl-tbd> +# BUG NOTE from Barbara E. Ringers <barb@brl-tbd>: +# If we set TERM=vt100, and set the Modgraph screen to 24 lines, setting a +# mark and using delete-to-killbuffer work correctly. However, we would +# like normal mode of operation to be using a Modgraph with 48 line setting. +# If we set TERM=mod (which is a valid entry in termcap with 48 lines) +# the setting mark and delete-to-killbuffer results in the deletion of only +# the line the mark is set on. +# We've discovered that the delete-to-killbuffer works correctly +# with TERM=mod and screen set to 80x48 but it's not obvious. Only +# the first line disappears but a ctrl-l shows that it did work +# correctly. +modgraph48|mod|Modgraph w/48 lines, + am, xenl, + cols#80, it#8, lines#48, vt#3, + bel=^G, blink=\E[5m, bold=\E[1m, clear=\E[;H\E[2J, cr=^M, + csr=\E[%i%p1%d;%p2%dr, cub1=^H, cud1=^J, cuf1=\E[C, + cup=\E[%i%p1%d;%p2%dH, cuu1=\E[A, ed=\E[J, el=\E[K, + flash=\E[?5h\E[0q\E[1;2q\E[?5l\E[0q\E[4;3q, + home=\E[H, ht=^I, is2=\E<\E[1;48r\E[0q\E[3;4q\E=\E[?1h, + kbs=^H, kcub1=\EOD, kcud1=\EOB, kcuf1=\EOC, kcuu1=\EOA, + kf1=\EOP, kf2=\EOQ, kf3=\EOR, kf4=\EOS, rc=\E8, rev=\E[7m, + ri=\EM, rmkx=\E[?1l\E>, rmso=\E[m, rmul=\E[m, + rs1=\E=\E[0q\E>, sc=\E7, sgr0=\E[m, smkx=\E[?1h\E=, + smso=\E[7m, smul=\E[4m, + +#### Morrow Designs +# +# This was George Morrow's company. They started in the late 1970s making +# S100-bus machines. They used to be reachable at: +# +# Morrow +# 600 McCormick St. +# San Leandro, CA 94577 +# +# but they're long gone now (1995). +# + +# The mt70 terminal was shipped with the Morrow MD-3 microcomputer. +# Jeff's specimen was dated June 1984. +# From: Jeff Wieland <wieland@acn.purdue.edu> 24 Feb 1995 +mt70|mt-70|Morrow MD-70; native Morrow mode, + am, mir, msgr, xon, + cols#80, it#8, lines#24, + acsc=+z\,{-x.yOi`|jGkFlEmDnHqJtLuKvNwMxI, bel=^G, + cbt=\EI, civis=\E"0, clear=^Z, cnorm=\E"2, cr=^M, cub1=^H, + cud1=^J, cuf1=^L, cup=\E=%p1%{32}%+%c%p2%{32}%+%c$<1>, + cuu1=^K, dch1=\EW, dim=\EG2, dl1=\ER, ed=\EY, el=\ET$<10>, + flash=\EK1$<200>\EK0, home=^^, ht=^I, ich1=\EQ, il1=\EE, + ind=^J, invis@, is1=\E"2\EG0\E], kbs=^H, kcbt=^A^Z\r, + kclr=^An\r, kcub1=^AL\r, kcud1=^AK\r, kcuf1=^AM\r, + kcuu1=^AJ\r, kdch1=\177, kf1=^A@\r, kf10=^AI\r, kf11=^A`\r, + kf12=^Aa\r, kf13=^Ab\r, kf14=^Ac\r, kf15=^Ad\r, kf16=^Ae\r, + kf17=^Af\r, kf18=^Ag\r, kf19=^Ah\r, kf2=^AA\r, kf20=^Ai\r, + kf3=^AB\r, kf4=^AC\r, kf5=^AD\r, kf6=^AE\r, kf7=^AF\r, + kf8=^AG\r, kf9=^AH\r, khlp=^AO\r, khome=^AN\r, nel=^_, + rmacs=\E%, rmcup=, smacs=\E$, smcup=\E"2\EG0\E], smul=\EG1, + tbc=\E0, + use=adm+sgr, + +#### Motorola +# + +# Motorola EXORterm 155 from {decvax, ihnp4}!philabs!sbcs!megad!seth via BRL +# (Seth H Zirin) +ex155|Motorola Exorterm 155, + am, bw, + cols#80, lines#24, + cbt=\E[, clear=\EX, cud1=\EB, cuf1=\ED, + cup=\EE%p1%{32}%+%c%p2%{32}%+%c, ed=\ET, el=\EU, + home=\E@, ht=\EZ, kbs=^H, kcbt=\E[, kclr=\EX, kcub1=^H, + kcud1=^J, kcuf1=^L, kcuu1=^K, ked=\ET, kel=\EU, khome=\E@, + rmso=\Ec\ED, rmul=\Eg\ED, smso=\Eb\ED, smul=\Ef\ED, + +#### Omron +# +# This company is still around in 1995, manufacturing point-of-sale systems. + +omron|Omron 8025AG, + am, da, db, + cols#80, lines#24, + bel=^G, clear=\EJ, cr=^M, cub1=^H, cud1=^J, cuf1=\EC, cuu1=\EA, + cvvis=\EN, dch1=\EP, dl1=\EM, ed=\ER, el=\EK, home=\EH, + il1=\EL, ind=\ES, ri=\ET, rmso=\E4, smso=\Ef, + +#### Ramtek +# +# Ramtek was a vendor of high-end graphics terminals around 1979-1983; they +# were competition for things like the Tektronics 4025. +# + +# Ramtek 6221 from BRL, probably by Doug Gwyn +# The following SET-UP modes are assumed for normal operation: +# UNDERLINE_CURSOR ANSI_MODE AUTO_XON/XOFF_ON +# NEWLINE_OFF 80_COLUMNS +# Other SET-UP modes may be set for operator convenience or communication +# requirements; I recommend +# SMOOTH_SCROLL AUTO_REPEAT_ON 3_#_SHIFTED WRAP_AROUND_ON +# Hardware tabs are assumed to be every 8 columns; they can be set up by the +# "reset", "tset", or "tabs" utilities (use rt6221-w, 160 columns, for this). +# Note that the Control-E key is useless on this brain-damaged terminal. No +# delays are specified; use "stty ixon -ixany" to enable DC3/DC1 flow control! +rt6221|Ramtek 6221 80x24, + msgr, xon, + cols#80, it#8, lines#24, vt#3, + acsc=, bel=^G, blink=\E[5m, bold=\E[1m, civis=\E[>5l, + clear=\E[1;1H\E[J, cnorm=\E[>5h\E[>9h, cr=^M, + csr=\E[%i%p1%d;%p2%dr, cub=\E[%p1%dD, cub1=^H, + cud=\E[%p1%dB, cud1=^K, cuf=\E[%p1%dC, cuf1=\E[C, + cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA, cuu1=\EM, + cvvis=\E[>7h\E[>9l, ed=\E[J, el=\E[K, home=\E[1;1H, ht=^I, + hts=\EH, ind=^J, is2=\E)0, kbs=^H, kcub1=\E[D, kcud1=\E[B, + kcuf1=\E[C, kcuu1=\E[A, kf0=\EOP, kf1=\EOQ, kf2=\EOR, + kf3=\EOS, lf0=PF1, lf1=PF2, lf2=PF3, lf3=PF4, ll=\E[24;1H, + nel=\EE, rc=\E8, rev=\E[7m, ri=\EM, rmacs=^O, rmkx=\E>, + rmso=\E[m, rmul=\E[m, + rs1=\E[1w\E[>37m\E[>39m\E[1v\E[20l\E[?3l\E[?6l\E[>5h\E[>6h\E[>7h\E[>8l\E[>9h\E[>10l\E[1;24r\E[m\E[q\E(B\017\E)0\E#5\E>, + sc=\E7, sgr0=\E[m, smacs=^N, smkx=\E=, smso=\E[7m, + smul=\E[4m, tbc=\E[3g, +# [TO DO: Check out: short forms of ho/cl and ll; reset (\Ec)]. +rt6221-w|Ramtek 6221 160x48, + cols#160, lines#48, + ll=\E[48;1H, use=rt6221, + +#### RCA +# + +# RCA VP3301 or VP3501 +rca|rca vp3301/vp3501, + cols#40, lines#24, + clear=^L, cuf1=^U, cup=\EY%p1%{32}%+%c%p2%{32}%+%c, + cuu1=^K, home=^Z, rmso=\E\ES0, smso=\E\ES1, + + +#### Selanar +# + +# Selanar HiREZ-100 from BRL, probably by Doug Gwyn +# The following SET-UP modes are assumed for normal operation: +# SET_DEFAULT_TABS 48_LINES 80_COLUMNS +# ONLINE ANSI CURSOR_VISIBLE +# VT102_AUTO_WRAP_ON VT102_NEWLINE_OFF VT102_MONITOR_MODE_OFF +# LOCAL_ECHO_OFF US_CHAR_SET WPS_TERMINAL_DISABLED +# CPU_AUTO_XON/XOFF_ENABLED PRINT_FULL_SCREEN +# For use with graphics software, all graphics modes should be set to factory +# default. Other SET-UP modes may be set for operator convenience or +# communication requirements. No delays are specified; use "stty ixon -ixany" +# to enable DC3/DC1 flow control! +# I commented out the scrolling capabilities since they are too slow. +hirez100|Selanar HiREZ-100, + mir, msgr, xon, + cols#80, it#8, lines#48, vt#3, + acsc=, bel=^G, blink=\E[5m, bold=\E[1m, clear=\E[H\E[J, + cr=^M, cub=\E[%p1%dD, cub1=^H, cud=\E[%p1%dB, cud1=^J, + cuf=\E[%p1%dC, cuf1=\E[C, cup=\E[%i%p1%d;%p2%dH, + cuu=\E[%p1%dA, cuu1=\EM, dch=\E[%p1%dP, dch1=\E[P, + dl=\E[%p1%dM, dl1=\E[M, ed=\E[J, el=\E[K, home=\E[H, ht=^I, + hts=\EH, il=\E[%p1%dL, il1=\E[L, is2=\E<\E)0, kbs=^H, + kcub1=\EOD, kcud1=\EOB, kcuf1=\EOC, kcuu1=\EOA, kf0=\EOP, + kf1=\EOQ, kf2=\EOR, kf3=\EOS, lf0=PF1, lf1=PF2, lf2=PF3, + lf3=PF4, ll=\E[48H, mc0=\E[i, mc4=\E[4i\E[?4i, + mc5=\E[?5i\E[5i, nel=\EE, rc=\E8, rev=\E[7m, rmacs=^O, + rmkx=\E[?1l\E>, rmso=\E[m, rmul=\E[m, + rs1=\030\E2\E<\E[4i\E[?4i\E[12h\E[2;4;20l\E[?0;7h\E[?1;3;6;19l\E[r\E[m\E(B\017\E)0\E>, + sc=\E7, sgr0=\E[m, smacs=^N, smkx=\E[?1h\E=, smso=\E[7m, + smul=\E[4m, tbc=\E[3g, +hirez100-w|Selanar HiREZ-100 in 132-column mode, + cols#132, use=hirez100, + +#### Signetics +# + +# From University of Wisconsin +vsc|Signetics Vsc Video driver by RMC, + am, msgr, + cols#80, it#8, lines#26, + clear=\E[;H\E[2J$<50/>, cr=^M, cub1=^H, cud1=^J, cuf1=\E[C, + cup=\E[%i%p1%d;%p2%dH, cuu1=\E[A, el=\E[K, home=\E[H, + ht=^I, ind=^J, kbs=^H, kcub1=^H, kcud1=^J, nel=^M^J, rev=^_\s, + rmso=^_!, rmul=^_#, sgr0=^_!, smso=^_\s, smul=^_", + +#### Soroc +# +# Alan Frisbie <frisbie@flying-disk.com> writes: +# +# As you may recall, the Soroc logo consisted of their name, +# with the letter "S" superimposed over an odd design. This +# consisted of a circle with a slightly smaller 15 degree (approx.) +# wedge with rounded corners inside it. The color was sort of +# a metallic gold/yellow. +# +# If I had been more of a beer drinker it might have been obvious +# to me, but it took a clue from their service department to make +# me exclaim, "Of course!" The circular object was the top of +# a beer can (the old removable pop-top style) and "Soroc" was an +# anagram for "Coors". +# +# I can just imagine the founders of the company sitting around +# one evening, tossing back a few and trying to decide what to +# call their new company and what to use for a logo. +# + +# (soroc120: removed obsolete ":ma=^K^P^R^L^L :" -- esr) +soroc120|iq120|soroc|soroc iq120, + clear=\E*$<2>, cud1=^J, ed=\EY, el=\ET, kcub1=^H, kcud1=^J, + kcuf1=^L, kcuu1=^K, + use=adm3a, +soroc140|iq140|soroc iq140, + am, mir, + cols#80, lines#24, + bel=^G, cbt=\EI, clear=\E+, cr=^M, cub1=^H, cud1=^J, cuf1=^L, + cup=\E=%p1%{32}%+%c%p2%{32}%+%c, cuu1=^K, dch1=\Ew, + dl1=\Er$<.7*>, ed=\Ey, el=\Et, home=^^, il1=\Ee$<1*>, ind=^J, + kbs=^H, kcuf1=^L, kcuu1=^K, kf0=^A0\r, kf1=^A@\r, kf2=^AA\r, + kf3=^AB\r, kf4=^AC\r, kf5=^AD\r, kf6=^AE\r, kf7=^AF\r, + kf8=^AG\r, kf9=^AH\r, khome=^^, ll=^^^K, rmir=\E8, + rmso=\E\177, rmul=\E^A, smir=\E9, smso=\E\177, smul=\E^A, + +#### Southwest Technical Products +# +# These guys made an early personal micro called the M6800. +# The ct82 was probably its console terminal. +# + +# (swtp: removed obsolete ":bc=^D:" -- esr) +swtp|ct82|southwest technical products ct82, + am, + cols#82, lines#20, + bel=^G, clear=^L, cr=^M, cub1=^D, cud1=^J, cuf1=^S, + cup=\013%p2%c%p1%c, cuu1=^A, dch1=^\^H, dl1=^Z, ed=^V, el=^F, + home=^P, ich1=^\^X, il1=^\^Y, ind=^N, + is2=\034\022\036\023\036\004\035\027\011\023\036\035\036\017\035\027\022\011, |