diff options
Diffstat (limited to 'contrib/ntp/ChangeLog')
| -rw-r--r-- | contrib/ntp/ChangeLog | 620 |
1 files changed, 619 insertions, 1 deletions
diff --git a/contrib/ntp/ChangeLog b/contrib/ntp/ChangeLog index a7abc1458223..1c498a6f014e 100644 --- a/contrib/ntp/ChangeLog +++ b/contrib/ntp/ChangeLog @@ -1,9 +1,627 @@ +2000-01-19 Harlan Stenn <stenn@whimsy.udel.edu> + + * configure.in: 4.0.99b + +2000-01-18 Harlan Stenn <stenn@whimsy.udel.edu> + + * ntpd/refclock_chu.c: NCHAN is used with generic ICOM. + + * ntpd/refclock_wwv.c: Use new auido stuff + * ntpd/refclock_irig.c: Use new audio stuff + * ntpd/refclock_chu.c: Use new audio stuff + * ntpd/ntp_proto.c: Clean up + * ntpd/ntp_loopfilter.c (local_clock): Clean up error message + * include/icom.h: Number of arguments changed + * libntp/Makefile.am (libntp_a_SOURCES): Added audio.c + * libntp/audio.c: New file + * include/Makefile.am (noinst_HEADERS): audio.h added + * include/audio.h: New file + From: Dave Mills <mills@udel.edu> + + * scripts/freq_adj: Added. FreeBSD frequency adjustment script. + + * configure.in: Do a better job on my oncore_ok check for SCO. + +2000-01-15 Harlan Stenn <stenn@whimsy.udel.edu> + + * configure.in: 4.0.99a + + * scripts/ntpsweep: New version + * html/copyright.htm: Added Hans Lambermont + From: Hans Lambermont <Hans.Lambermont@nl.origin-it.com> + +2000-01-14 Harlan Stenn <stenn@whimsy.udel.edu> + + * ntpd/refclock_oncore.c (oncore_start): Only dance with the + pps_device if it's there. + From: reg@dwf.com + + * configure.in: ONCORE is OK if ac_cv_hdr_def_tiocdcdtimestamp=yes + + * build: Just overwrite the log file each time; sometimes NFS goes + a little goofy. + + * ntpd/refclock_fg.c: Syntax/punctuation cleanup + +2000-01-13 Harlan Stenn <stenn@whimsy.udel.edu> + + * scripts/ntpsweep: New version + From: Hans Lambermont <Hans.Lambermont@nl.origin-it.com> + + * ntpd/refclock_fg.c: New version + * html/driver37.htm: New version + From: Dmitry Smirnov <das@online.nsk.su> + +2000-01-12 Harlan Stenn <stenn@whimsy.udel.edu> + + * README.des: Cleanup + +2000-01-12 Harlan Stenn <stenn@whimsy.udel.edu> + + * configure.in: 4.0.99 + + * html/driver36.htm: Cleanup + * html/monopt.htm: Ditto + From: Dave Mills <mills@udel.edu> + + * ntpd/ntp_intres.c (ntp_intres): Put "NTP_INTRES running" at a + higher debug level + +2000-01-11 Harlan Stenn <stenn@whimsy.udel.edu> + + * ntpd/refclock_wwv.c: More improvements + From: Dave Mills <mills@udel.edu> + +2000-01-10 Harlan Stenn <stenn@whimsy.udel.edu> + + * ntpd/refclock_wwv.c: Bugfixes/improvements + From: Dave Mills <mills@udel.edu> + + * configure.in: Get the quoting right on the sys_errlist check. + From documentation by: Akim Demaille <akim@epita.fr> + +2000-01-08 Harlan Stenn <stenn@whimsy.udel.edu> + + * configure.in: <netinet/ip.h> cannot be detected... + * ntpd/ntp_io.h: ...but every OS has it + * ntpd/refclock_oncore.c: Lint removal + * ntpq/ntpq_ops.c: Lint removal + * ntpq/refclock_chu.c: chu_major() is not an audio routine (?), lint + * libntp/icom.c: AIX doesn't have <sys/termios.h> + From: Marc.Brett@westgeo.com + + * ntpd/refclock_chu.c: NetBSD needs sys/ioctl.h + (chu_debug): NetBSED-specific debug output. + From: Frederick Bruckman <fb@enteract.com> + +2000-01-06 Harlan Stenn <stenn@whimsy.udel.edu> + + * configure.in: 4.0.98m + I skipped `l' - it looks like a `1'. + + * html/driver7.htm: Doc update + * html/driver36.htm: Ditto + * html/audio.htm: Ditto + + * ntpd/refclock_wwv.c: Dvae snuck another fix/change in on me. + + * configure.in: 4.0.98k + + * ntpd/refclock_chu.c (chu_start): Call icom_init with the speed + * ntpd/refclock_wwv.c (wwv_start): Ditto, plus other improvements. + * libntp/icom.c (icom_init): Add speed parameter + * include/icom.h: Update declaration + From: Dave Mills <mills@udel.edu> + + * include/Makefile.am (noinst_HEADERS): Added icom.h + From: Frederick Bruckman <fb@enteract.com> + +2000-01-05 Harlan Stenn <stenn@whimsy.udel.edu> + + * configure.in: 4.0.98j + + * ntpd/refclock_wwv.c (timecode): Make definition == declaration + (wwv_newchan): Ditto + (wwv_corr4): Dave fixed the declaration. + + * flock-build: Add rackety to the flock - it runs SunOS 4.1.3/cc + + * ntpd/refclock_wwv.c: Undo that declaration cleanup for now... + + * ntpd/ntp_io.c (open_socket): TOS support + From: Marc.Brett@westgeo.com + +2000-01-04 Harlan Stenn <stenn@whimsy.udel.edu> + + * ntpd/refclock_wwv.c: Declaration cleanup + * ntpd/refclock_fg.c (fg_receive): Not all sprintf's are created + equal... + From: Marc.Brett@westgeo.com + + * ntpd/refclock_wwv.c: Dave Cleaned and Improved things. + * ntpd/ntp_loopfilter.c (local_clock): Dave fixed something. + + * ntpd/refclock_wwv.c: Rename max to p_max or s_max as appropriate + to avoid native SunOS compiler collision. + (wwv_epoch): Make declaration == definition + (wwv_rsec): Ditto + (wwv_newchan): Ditto + (wwv_qsy): Ditto + (timecode): Ditto + + * ntpd/refclock_oncore.c (oncore_init_shmem): Use a cast to widen + mmap's NIL offset. + + * ntpd/refclock_chu.c (chu_rf): Make declaration == definition. + Rename min/max to es_min/es_max to avoid native SunOS compiler + collision. + (chu_uart): Make declaration == definition. + + * libntp/icom.c (sndpkt): Make declaration and definition equivalent. + (doublefreq): Ditto. + + * ntpd/refclock_oncore.c (MAP_FAILED): Some systems do not #define + this. + + * ntpd/refclock_wwv.c: + * ntpd/refclock_chu.c: + * libntp/icom.c: + * libntp/Makefile.am: + * include/icom.h: + * html/driver7.htm: + * html/driver36.htm: + Support for ICOM. The WWV/H driver, by the way, is getting truly + awesome. The CHU autotune function works okay as it is. I'd like + to find somebody else to test the audio drivers just to make sure + I haven't done something stupid. There is a new define ICOM + intended for the driver autotune function; however, I crafted the + thing in much the same way as the refclock_atom.c thing - it tries + to open /dev/icom and, if that fails, goes quietly to sleep. + From: Dave Mills <mills@udel.edu> + +2000-01-03 Harlan Stenn <stenn@whimsy.udel.edu> + + * ntpd/refclock_oncore.c (oncore_read_config): Patches and cleanup + From: Poul-Henning Kamp <phk@critter.freebsd.dk> + more isascii() stuff from HMS. + + * ntpd/refclock_fg.c (fg_receive): Cast. + From: Tom Smith <smith@cag.lkg.dec.com> + + * ntpd/map_vme.c (map_vme): tx.access_result indicates failure on + < 0, not <= 0. A fix that apparently did not get brought over + from the ntp3 base. + From: Michael Barone <michael.barone@lmco.com> + + * configure.in: Move the ONCORE_SHMEM_STATUS check and definition + here. + + * ntpd/refclock_oncore.c (oncore_init_shmem): Some systems do not + have MAP_HASSEMAPHORE. + + * ntpd/refclock_oncore.c: Drive ONCORE_SHMEM_STATUS based on + HAVE_SYS_MMAN_H . If this needs finer checks, do it in + configure.in . + (oncore_read_config): Add the isascii() checks; older versions of + Unix don't guarantee correct behavior of is*() without it. + + * ntpd/refclock_oncore.c: Add proof-of-concept support for + delivering receiver data stream to other processes through + a memory-mapped file. + From: Poul-Henning Kamp <phk@FreeBSD.org> + +2000-01-02 Harlan Stenn <stenn@whimsy.udel.edu> + + * configure.in (ac_refclock_chu): Provide the CHU driver by + default, and by default prefer the AUDIO version. We used to + limit this to SunOS or Solaris; now we drive by the availability + of the audioio header file. + Select the IRIG and WWV audio drivers the same way. + + * flock-build: build ignores the -l flag; lose it. + (BUILD_ARGS): added. + * build: Remove unused -l stuff (LOG variable). + + * ntpd/ntp_refclock.c: HAVE_PPSAPI header cleanup + From: Reg Clemens <reg@dwf.com> + +2000-01-01 Harlan Stenn <stenn@whimsy.udel.edu> + + * configure.in (CLOCK_WWV): Require <sys/audioio.h> or <sun/audioio.h> + +1999-12-29 Harlan Stenn <stenn@whimsy.udel.edu> + + * configure.in: 4.0.98i + + * ntpd/refclock_gpsvme.c: Fixes + From: Michael Barone <michael.barone@lmco.com> + Patch severely hacked by HMS to "make it conform". I hope I + didn't break anything. + + * scripts/ntpsweep: Nifty utility + From: Hans.Lambermont@nl.origin-it.com + + * ntpd/refclock_fg.c: + * ntpd/refclock_conf.c: + * ntpd/ntp_control.c: + * ntpd/Makefile.am: + * libntp/clocktypes.c: + * include/ntp.h: + * html/refclock.htm: + * html/driver37.htm: + * configure.in: + * acconfig.h: + Forum Graphic GPS clock support + From: Dmitry Smirnov <das@online.nsk.su> + + * configure.in: Default to compile the IRIG, CHU and WWV/H + drivers and compile the CHU driver for audio, not modem. + Requested by Dave Mills. + + * html/audio.htm: + * html/driver36.htm: + * html/qth.htm: + Dave wrote these to go along with the changes I checked in yesterday. + +1999-12-28 Harlan Stenn <stenn@whimsy.udel.edu> + + * ntpd/refclock_wwv.c: + * ntpd/refclock_conf.c: + * ntpd/refclock_chu.c: + * ntpd/ntp_refclock.c: + * ntpd/ntp_loopfilter.c: + * html/refclock.htm: + * html/pps.htm: + * html/index.htm: + * html/driver7.htm: + * html/driver6.htm: + * html/copyright.htm: + + I indulged an old agenda to polish up some programs originally + written for a DSP evaluation board. The result is a really hot + audio driver for the NIST WWV/WWVH time/frequency station plus a + makeover for the CHU audio driver. Currently, they and their IRIG + audio driver buddy use the SunOS/Solaris audio interface, which is + clean and simple. I hook the line in jack to a shortwave radio and + these drivers (driver 7 for CHU and driver 36 for WWV) and the + drivers do the rest. The WWV/H driver is really hot - I am + currently watching the ionosphere move from the doppler that shows + up on the tick modulation tracked by the program. During midday + when the F2 layer settles down, the program closes in on a few + tens of microseconds of spare jitter and wander. This watch on + whichever 15/20 MHz signal sounds the best. At night on 5/10 MHz + and even 2.5 HMz where the multipath, interference and noise are + much worse, the driver bangs around somewhat more. + + The CHU driver makeover discovered a few broken bones after all + these years, but its majority decoder is back in business. For + various reasons to icky to reveal here, its 103-modem demodulator + is not quite as good as the chip, but it comes close and hey, + 2025/2125 FSK is just not a good idea for HF radio. This driver is + not nearly as sophisitcated as the WWV/H driver, but here a few + hundred miles south of Ottawa, it does a passably good job. + + I tell you this in the hopes of getting somebody interested in + porting the audio interface to other machines, in particular + Linux, FreeBSD and anything else with a sound card. When the + ionosphere stays cool, the WWV/H driver is as good as anything + else around here and with much less jitter than a serial port. The + only downside is all the audio drivers chew up a modest fraction + of cycles for the DSP routines - a few percent on the newer + silicon, up to half the cycles on an old Sparc IPC. Whattheheck, + these old machines aren't doing anything else around here except + serving time, and even when sucking cycles for DSP they still mind + the PPS microseconds. + + The audio driver documentation had a makeover, too. + From: Dave Mills <mills@udel.edu> + +1999-12-20 Harlan Stenn <stenn@whimsy.udel.edu> + + * configure.in: 4.0.98h + +1999-12-19 Harlan Stenn <stenn@whimsy.udel.edu> + + * libntp/syssignal.c: Small cleanup to Marc's patch. + + * ntpd/ntp_refclock.c: + * ntpd/refclock_atom.c: Header cleanup + * html/driver30.htm: Cleanup and improvements. + From: Reg Clemens <reg@dwf.com> + + * ntpd/ntp_refclock.c: + * ntpd/refclock_jupiter.c: + * ntpd/refclock_msfees.c: + * ntpd/refclock_mx4200.c: + Portability (Solaris) patches + * ntpd/refclock_mx4200.c: + Self-survey improvements, cleanup for, PPS re-activation + * libntp/syssignal.c: + Fix for "interrupted system call" (EINTR) failure of the PPS + ioctl(TIOCGPPSEV) call in Solaris. Not sure why it was + interrupted, but this works around the failure. Not sure if + the (now silent) interrupt affects the timing accuracy. + THERE IS A CHANCE THIS PART OF THE PATCH MAY ADVERSELY + AFFECT OTHER SYSTEMS! + * scripts/ntp-status: Added. + From: Marc.Brett@westgeo.com + + * ntpdate/ntpdate.c: Deal with multiple addresses. + From: Jeffrey C Honig <jch@bsdi.com> + + * ntpd/refclock_conf.c: Replaced macro SHM with CLOCK_SHM. + * ntpd/refclock_shm.c (shm_poll): Take clock time in UTC. + pp->day starts at 1, t->tm_yday starts at 0. + From: Jakob Stoklund Olesen <stoklund@taxidriver.dk> + +1999-12-16 Harlan Stenn <stenn@whimsy.udel.edu> + + * NEWS: Updated ONCORE instructions + From: Kamal A Mostafa <kamal@whence.com> + +1999-12-13 Harlan Stenn <stenn@whimsy.udel.edu> + + * configure.in: 4.0.98g + + * ntpd/refclock_oncore.c: Cleanup and fixes + From: Reg Clemens <reg@dwf.com> and Kamal A Mostafa <kamal@whence.com> + +1999-12-11 Harlan Stenn <stenn@whimsy.udel.edu> + + * ntpd/refclock_wwv.c: Cleanup/checkin of the current state of affairs. + From: Dave Mills <mills@udel.edu> + + * ntpd/refclock_oncore.c: #elif conversion. I can only hope I did + it right. + + * ntpd/refclock_oncore.c: Various patches + From: Reg Clemens <reg@dwf.com> and Kamal A Mostafa <kamal@whence.com> + +1999-12-09 Harlan Stenn <stenn@whimsy.udel.edu> + + * ntpd/ntp_proto.c (default_get_precision): Use the right arg type + to pass "sizeof freq" to sysctlbyname(). + From: Ollivier Robert <roberto@eurocontrol.fr> + + * ntpd/refclock_wwv.c: Cleanup and fixes. + From: Dave Mills <mills@udel.edu> + +1999-12-08 Harlan Stenn <stenn@whimsy.udel.edu> + + * ntpd/refclock_wwv.c: Cleanup and fixes + * ntpd/refclock_conf.c: WWV declaration cleanup. + From: Dave Mills <mills@udel.edu> + +1999-12-07 Harlan Stenn <stenn@whimsy.udel.edu> + + * libparse/clk_rawdcf.c (cvt_rawdcf): Buglet. + From: Frank Kardel <kardel@acm.org> + +1999-12-06 Harlan Stenn <stenn@whimsy.udel.edu> + + * ntpd/Makefile.am (ntpd_SOURCES): Added refclock_wwv.c + + * ntpd/refclock_wwvb.c: + * ntpd/refclock_wwv.c: + * ntpd/refclock_conf.c: + * ntpd/refclock_chu.c: + * libntp/clocktypes.c: + * include/ntp.h: Dave cleaned some things up + Dave cleaned some things up (WWVB -> SPECTRACOM, CHU -> CHU_AUDIO, + WWV_AUDIO) + + * acconfig.h: REFCLOCK_WWVB -> REFCLOCK_SPECTRACOM, added REFCLOCK_WWV + * configure.in: Deal with it. + +1999-12-05 Harlan Stenn <stenn@whimsy.udel.edu> + + * ntpd/ntp_refclock.c (refclock_open): More PPS cleanup + From: Dave Mills <mills@udel.edu> + + * ntpq/ntpq.c: + * ntpq/ntpq_ops.c: + Make `ntpq -pn' independent of DNS, ad advertised. + From: Kamal A Mostafa <kamal@whence.com> + + * ntpd/refclock_mx4200.c (mx4200_start): make missing 3rd + parameter a 0. + +1999-12-04 Harlan Stenn <stenn@whimsy.udel.edu> + + * ntpd/ntp_refclock.c (refclock_open): "flags" processing cleanup + (refclock_open): PPS device initialization cleanup + * include/ntp_refclock.h (LDISC_CHU): + (LDISC_PPS): Clean up comments + From: Dave Mills <mills@udel.edu> + +1999-12-03 Sven Dietrich <sven_dietrich@trimble.com> + + * libntp/mexit.c: Moved WINNT port specific file to ports/winnt/libntp + * ports/winnt/libntp/libntp.dsp: Fix WinNT makefile for new source loc. + +1999-12-03 Harlan Stenn <stenn@whimsy.udel.edu> + + * libntp/Makefile.am (libntp_a_SOURCES): Lose mexit.c - Sven will + move it to the winnt port area. + +1999-12-03 Sven Dietrich <sven_dietrich@trimble.com> + + * libntp/systime.c: Removed adjtime hack for WINNT + * ports/winnt/ntpd/nt_clockstuff.c: Winnt double precision adjtime + * ports/winnt/inlcude/clockstuff.h: Remove no longer needed externs + +1999-12-02 Harlan Stenn <stenn@whimsy.udel.edu> + + * libparse/Makefile.in: Manually hacked to remove the + libparse_kernel.a.[co] cruft + + * libparse/Makefile.am (k*.o): Generate these form the Makefile, + not from separate .c files + + * html/tickadj.htm: + * html/notes.htm: + * html/hints/solaris.html: + Point to the new dosynctodr report. + + * html/hints/solaris.xtra.S99ntpd: + Update. Should be rewritten to take advantage of the new -g + switch and perhaps a loop to wait until ntpd hits a reasonable + "state". + + * html/hints/solaris-dosynctodr.html: New information + From: "John W. Sopko Jr." <sopko@cs.unc.edu> + +1999-12-01 Harlan Stenn <stenn@whimsy.udel.edu> + + * libntp/authkeys.c (auth_moremem): Clear memory allocated for sk. + From: Hugo Mildenberger <hugo.mildenberger@topmail.de> + +1999-12-01 Sven Dietrich <sven_dietrich@trimble.com> + + * libntp/recvbuff.c: Unused functions cleanup + * ntpd/ntpd.c: ProcessorAffinity, IO cleanup + * ports/winnt/instsrv/instsrv.c: Service name changed to NTP + + NT port shouldn;t hop between CPUs. Set affinity to first processor. + Service name was NetworkTimeProtocol. Too long. Now NTP. + +1999-12-01 Harlan Stenn <stenn@whimsy.udel.edu> + + * scripts/plot_summary.pl: Improved option parsing. Fixed one + minor Perl compatibility error. + * scripts/summary.pl: Official revision for NTPv4: Parse new + statistic file formats correctly, provide error checking for bad + input files, and guard against negative arguments to sqrt() + because of numeric effects. Use one pattern to select valid + statistic files. Add selectable output directory + (``--output-directory'') and improved option parsing. Directory + with statistic files (now settable also with + ``--input-directory'') defaults to ``/var/log/ntp''. + From: Ulrich Windl <Ulrich.Windl@rz.uni-regensburg.de> + + * html/driver8.htm: + * libparse/clk_computime.c: + * libparse/clk_dcf7000.c: + * libparse/clk_hopf6021.c: + * libparse/clk_meinberg.c: + * libparse/clk_rawdcf.c: + * libparse/clk_rcc8000.c: + * libparse/clk_schmid.c: + * libparse/clk_trimtaip.c: + * libparse/clk_trimtsip.c: + * libparse/data_mbg.c: + * libparse/kclk_computime.c: + * libparse/kclk_dcf7000.c: + * libparse/kclk_hopf6021.c: + * libparse/kclk_meinberg.c: + * libparse/kclk_rawdcf.c: + * libparse/kclk_rcc8000.c: + * libparse/kclk_schmid.c: + * libparse/kclk_trimtaip.c: + * libparse/kclk_trimtsip.c: + * libparse/kparse.c: + * libparse/kparse_conf.c: + * libparse/parse.c: + * libparse/parse_conf.c: + * libparse/parsesolaris.c: + * libparse/parsestreams.c: + * ntpd/refclock_parse.c: + Mods and updates + From: Frank Kardel <kardel@acm.org> + + * acconfig.h: PCF refclock + * configure.in: + * html/driver35.htm: + * html/refclock.htm: + * include/ntp.h: + * libntp/clocktypes.c: + * ntpd/Makefile.am: + * ntpd/ntp_control.c: + * ntpd/refclock_conf.c: + * ntpd/refclock_pcf.c: + From: Andreas Voegele <andreas.voegele@gmx.de> + + * acconfig.h: DECL_STIME_1 + + * configure.in (iCFLAGS): Use -std1 for alpha*-dec-osf* if we are + using "cc". + Reported by: Tom Smith <smith@cag.lkg.dec.com> + +1999-11-30 Harlan Stenn <stenn@whimsy.udel.edu> + + * include/l_stdlib.h: DECL_SYSTIME_1 --- a long * + * configure.in: Use it for DEC OSF[45] + Reported by: Tom Smith <smith@cag.lkg.dec.com> + + * ntpd/refclock_parse.c: Add missing declarations + * ntptrace/ntptrace.c: Ditto + * ntpd/ntp_proto.c: Ditto + * ntpd/refclock_palisade.c: Ditto + From: Jonathan Stone <jonathan@dsg.stanford.edu> + +1999-11-18 Sven Dietrich <sven_dietrich@trimble.com> + * Win NT port updates + * ntpd.dsp: makefile only builds supported refclocks + * config.h: cleanup, undefine unsupported clock_atom + * win32_io, clock_NMEA: foundation for future refclock support + * recvbuff, transmitbuff, IOcompletionport: streamline packet handler + * html/hints/winnt.htm: Added up-to-date html docs for WINNT + +1999-11-17 Harlan Stenn <stenn@whimsy.udel.edu> + + * html/copyright.htm: Credit Jack for his work. + + * html/pic/*: Save a *ton* of space on the pictures. + From: Jack Sasportas <jack@innovativeinternet.com> + +1999-11-16 Harlan Stenn <stenn@whimsy.udel.edu> + + * configure.in : changequote for osf[45] test. + Reported by: Tom Smith <smith@cag.lkg.dec.com> + + * ntp_update: Ignore stuff in any A.* directory. + +1999-11-15 Harlan Stenn <stenn@whimsy.udel.edu> + + * configure.in: Clean up header checks for sys/syssgi.h and + sys/select.h . Originally, we did not check for sys/select.h + under some versions of SCO (see xntp3-5). Somewhere in ntp4 we + dropped the SCO check and added the check for sys/syssgi.h, + exclusive of checking for sys/select.h. Marc Brett can't think of + a reason why we should not be checking for sys/select.h, so let's + look for it now. + +1999-11-13 Harlan Stenn <stenn@whimsy.udel.edu> + + * ntpdate/ntpdate.c: Add the ability for ntpdate to query a + multicast address. We use the response to the multicast address + to learn new servers which we then add to the peer list and query. + In changing this I made the list of peers a linked list. + + To be complete I should detect a broadcast address and make it + behave the same way. But that requires a scan of the interface + list which is more complicated that I want to deal with... + + Fix a bug, allowing ntpdate to compile if SLEWALWAYS and STEP_SLEW + are both defined. + + From: Jeffrey C Honig <jch@bsdi.com> + + * ntpd/ntp_refclock.c: sys/sio.h and SCO5_CLOCK cleanup + From: Kamal A Mostafa <kamal@whence.com> + + * ntpd/ntp_loopfilter.c: Let -g do a "correct any" for the first + time adjustment. + From: Dave Mills <mills@udel.edu> + + * configure.in: sys/sio.h needs to be checked independently. + Reported by: Kamal A Mostafa <kamal@whence.com> + 1999-11-11 Harlan Stenn <stenn@whimsy.udel.edu> * configure.in: 4.0.98f * configure.in: DECL_PLOCK_0 and DECL_STIME_0 are for dec-osf5*, too - * ntpd/ntpd.c: DEC OSF cleanup (editorial comments by HMS) From: Tom Smith <smith@cag.lkg.dec.com> |