diff options
Diffstat (limited to 'crypto/openssl/Configure')
| -rwxr-xr-x | crypto/openssl/Configure | 338 |
1 files changed, 223 insertions, 115 deletions
diff --git a/crypto/openssl/Configure b/crypto/openssl/Configure index fdad0c238c1a..273b7b75aaf2 100755 --- a/crypto/openssl/Configure +++ b/crypto/openssl/Configure @@ -10,7 +10,7 @@ use strict; # see INSTALL for instructions. -my $usage="Usage: Configure [-Dxxx] [-lxxx] [-Lxxx] [-fxxx] [-Kxxx] [rsaref] [no-threads] [no-asm] [386] [--prefix=DIR] [--openssldir=OPENSSLDIR] os/compiler[:flags]\n"; +my $usage="Usage: Configure [no-<cipher> ...] [-Dxxx] [-lxxx] [-Lxxx] [-fxxx] [-Kxxx] [rsaref] [no-threads] [no-asm] [386] [--prefix=DIR] [--openssldir=OPENSSLDIR] os/compiler[:flags]\n"; # Options: # @@ -51,6 +51,10 @@ my $usage="Usage: Configure [-Dxxx] [-lxxx] [-Lxxx] [-fxxx] [-Kxxx] [rsaref] [no # RC4_LONG use 'long' instead of 'int' for RC4_INT in crypto/rc4/rc4.h # RC4_INDEX define RC4_INDEX in crypto/rc4/rc4_locl.h. This turns on # array lookups instead of pointer use. +# RC4_CHUNK enables code that handles data aligned at long (natural CPU +# word) boundary. +# RC4_CHUNK_LL enables code that handles data aligned at long long boundary +# (intended for 64-bit CPUs running 32-bit OS). # BF_PTR use 'pointer arithmatic' for Blowfish (unsafe on Alpha). # BF_PTR2 intel specific version (generic version is more efficient). # MD5_ASM use some extra md5 assember, @@ -82,90 +86,135 @@ my $x86_bsdi_asm="asm/bn86bsdi.o asm/co86bsdi.o:asm/dx86bsdi.o asm/yx86bsdi.o:as # -DB_ENDIAN slows things down on a sparc for md5, but helps sha1. # So the md5_locl.h file has an undef B_ENDIAN if sun is defined -#config-string CC : CFLAGS : LDFLAGS : special header file mods:bn_asm \ -# des_asm:bf_asm +#config-string $cc : $cflags : $unistd : $thread_cflag : $lflags : $bn_ops : $bn_obj : $des_obj : $bf_obj : $md5_obj : $sha1_obj : $cast_obj : $rc4_obj : $rmd160_obj : $rc5_obj + my %table=( -#"b", "$tcc:$tflags::$tlib:$bits1:$tbn_mul::", -#"bl-4c-2c", "$tcc:$tflags::$tlib:${bits1}BN_LLONG RC4_CHAR MD2_CHAR:$tbn_mul::", -#"bl-4c-ri", "$tcc:$tflags::$tlib:${bits1}BN_LLONG RC4_CHAR RC4_INDEX:$tbn_mul::", -#"b2-is-ri-dp", "$tcc:$tflags::$tlib:${bits2}IDEA_SHORT RC4_INDEX DES_PTR:$tbn_mul::", +#"b", "${tcc}:${tflags}::${tlib}:${bits1}:${tbn_mul}::", +#"bl-4c-2c", "${tcc}:${tflags}::${tlib}:${bits1}BN_LLONG RC4_CHAR MD2_CHAR:${tbn_mul}::", +#"bl-4c-ri", "${tcc}:${tflags}::${tlib}:${bits1}BN_LLONG RC4_CHAR RC4_INDEX:${tbn_mul}::", +#"b2-is-ri-dp", "${tcc}:${tflags}::${tlib}:${bits2}IDEA_SHORT RC4_INDEX DES_PTR:${tbn_mul}::", # Our development configs "purify", "purify gcc:-g -DPURIFY -Wall::(unknown):-lsocket -lnsl::::", -"debug", "gcc:-DBN_DEBUG -DREF_CHECK -DCRYPTO_MDEBUG -ggdb -g2 -Wformat -Wshadow -Wmissing-prototypes -Wmissing-declarations -Werror::(unknown):-lefence::::", -"debug-ben", "gcc:-DBN_DEBUG -DREF_CHECK -DCRYPTO_MDEBUG -DPEDANTIC -O2 -pedantic -Wall -Wshadow -Werror -pipe::(unknown):::::", -"debug-ben-debug", "gcc:-DBN_DEBUG -DREF_CHECK -DCRYPTO_MDEBUG -g3 -O2 -pedantic -Wall -Wshadow -Werror -pipe::(unknown):::::", -"debug-ben-strict", "gcc:-DBN_DEBUG -DREF_CHECK -DCRYPTO_MDEBUG -DCONST_STRICT -O2 -Wall -Wshadow -Werror -Wpointer-arith -Wcast-qual -Wwrite-strings -pipe::(unknown):::::", -"debug-rse","cc:-DTERMIOS -DL_ENDIAN -pipe -O -g -ggdb3 -Wall::(unknown)::BN_LLONG $x86_gcc_des $x86_gcc_opts:$x86_elf_asm", -"debug-bodo", "gcc:-DBIO_PAIR_DEBUG -DL_ENDIAN -DREF_CHECK -DCRYPTO_MDEBUG_ALL -g -m486 -Wall::-D_REENTRANT::BN_LLONG $x86_gcc_des $x86_gcc_opts:$x86_elf_asm", +"debug", "gcc:-DBN_DEBUG -DREF_CHECK -DBN_CTX_DEBUG -DCRYPTO_MDEBUG -ggdb -g2 -Wformat -Wshadow -Wmissing-prototypes -Wmissing-declarations -Werror::(unknown):-lefence::::", +"debug-ben", "gcc:-DBN_DEBUG -DREF_CHECK -DBN_CTX_DEBUG -DCRYPTO_MDEBUG -DPEDANTIC -O2 -pedantic -Wall -Wshadow -Werror -pipe::(unknown):::::", +"debug-ben-debug", "gcc:-DBN_DEBUG -DREF_CHECK -DBN_CTX_DEBUG -DCRYPTO_MDEBUG -g3 -O2 -pedantic -Wall -Wshadow -Werror -pipe::(unknown):::::", +"debug-ben-strict", "gcc:-DBN_DEBUG -DREF_CHECK -DBN_CTX_DEBUG -DCRYPTO_MDEBUG -DCONST_STRICT -O2 -Wall -Wshadow -Werror -Wpointer-arith -Wcast-qual -Wwrite-strings -pipe::(unknown):::::", +"debug-rse","cc:-DTERMIOS -DL_ENDIAN -pipe -O -g -ggdb3 -Wall::(unknown)::BN_LLONG ${x86_gcc_des} ${x86_gcc_opts}:${x86_elf_asm}", +"debug-bodo", "gcc:-DBIO_PAIR_DEBUG -DL_ENDIAN -DREF_CHECK -DBN_CTX_DEBUG -DCRYPTO_MDEBUG_ALL -g -m486 -pedantic -Wshadow -Wall::-D_REENTRANT::BN_LLONG ${x86_gcc_des} ${x86_gcc_opts}:${x86_elf_asm}", +"debug-ulf", "gcc:-DL_ENDIAN -DREF_CHECK -DBN_DEBUG -DBN_CTX_DEBUG -DCRYPTO_MDEBUG_ALL -g -O2 -m486 -Wall -Werror -Wshadow -pipe::-D_REENTRANT::${x86_gcc_des} ${x86_gcc_opts}:${x86_elf_asm}", +"debug-steve", "gcc:-DL_ENDIAN -DREF_CHECK -DBN_CTX_DEBUG -DCRYPTO_MDEBUG_ALL -DPEDANTIC -g -O2 -m486 -pedantic -Wall -Werror -Wshadow -pipe::-D_REENTRANT::${x86_gcc_des} ${x86_gcc_opts}:${x86_elf_asm}", +"debug-levitte-linux-elf","gcc:-DUSE_ALLOCATING_PRINT -DRL_DEBUG -DREF_CHECK -DBN_CTX_DEBUG -DCRYPTO_MDEBUG -DNO_ASM -DL_ENDIAN -DTERMIO -D_POSIX_SOURCE -ggdb -g3 -m486 -pedantic -ansi -Wall -Wshadow -Wid-clash-31 -pipe::-D_REENTRANT:::", "dist", "cc:-O::(unknown):::::", -# Basic configs that should work on any box +# Basic configs that should work on any (32 and less bit) box "gcc", "gcc:-O3::(unknown)::BN_LLONG:::", "cc", "cc:-O::(unknown):::::", #### Solaris x86 setups -"solaris-x86-gcc","gcc:-O3 -fomit-frame-pointer -m486 -Wall -DL_ENDIAN::-D_REENTRANT:-lsocket -lnsl:BN_LLONG $x86_gcc_des $x86_gcc_opts:$x86_sol_asm", +# -DNO_INLINE_ASM switches off inline assembler. We have to do it +# here because whenever GNU C instantiates an assembler template it +# surrounds it with #APP #NO_APP comment pair which (at least Solaris +# 7_x86) /usr/ccs/bin/as fails to assemble with "Illegal mnemonic" +# error message. +"solaris-x86-gcc","gcc:-O3 -fomit-frame-pointer -m486 -Wall -DL_ENDIAN -DNO_INLINE_ASM::-D_REENTRANT:-lsocket -lnsl:BN_LLONG ${x86_gcc_des} ${x86_gcc_opts}:${x86_sol_asm}", #### SPARC Solaris with GNU C setups -"solaris-sparcv7-gcc","gcc:-O3 -fomit-frame-pointer -Wall -DB_ENDIAN -DBN_DIV2W::-D_REENTRANT:-lsocket -lnsl:BN_LLONG RC4_CHAR DES_UNROLL BF_PTR:::", -"solaris-sparcv8-gcc","gcc:-mv8 -O3 -fomit-frame-pointer -Wall -DB_ENDIAN -DBN_DIV2W::-D_REENTRANT:-lsocket -lnsl:BN_LLONG RC4_CHAR DES_UNROLL BF_PTR:asm/sparcv8.o::", -"solaris-sparcv9-gcc","gcc:-mcpu=ultrasparc -O3 -fomit-frame-pointer -Wall -DB_ENDIAN -DBN_DIV2W -DULTRASPARC::-D_REENTRANT:-lsocket -lnsl:BN_LLONG RC4_CHAR DES_UNROLL BF_PTR:asm/sparcv8plus.o:::asm/md5-sparcv8plus.o:", +"solaris-sparcv7-gcc","gcc:-O3 -fomit-frame-pointer -Wall -DB_ENDIAN -DBN_DIV2W::-D_REENTRANT:-lsocket -lnsl:BN_LLONG RC4_CHAR RC4_CHUNK DES_UNROLL BF_PTR:::", +"solaris-sparcv8-gcc","gcc:-mv8 -O3 -fomit-frame-pointer -Wall -DB_ENDIAN -DBN_DIV2W::-D_REENTRANT:-lsocket -lnsl:BN_LLONG RC4_CHAR RC4_CHUNK DES_UNROLL BF_PTR:asm/sparcv8.o::", +"solaris-sparcv9-gcc","gcc:-mcpu=ultrasparc -O3 -fomit-frame-pointer -Wall -DB_ENDIAN -DBN_DIV2W -DULTRASPARC::-D_REENTRANT:-lsocket -lnsl:BN_LLONG RC4_CHAR RC4_CHUNK DES_UNROLL BF_PTR:asm/sparcv8plus.o:::asm/md5-sparcv8plus.o:", # gcc pre-2.8 doesn't understand -mcpu=ultrasparc, so fall down to -mv8 # but keep the assembler modules. -"solaris-sparcv9-gcc27","gcc:-mv8 -O3 -fomit-frame-pointer -Wall -DB_ENDIAN -DBN_DIV2W -DULTRASPARC::-D_REENTRANT:-lsocket -lnsl:BN_LLONG RC4_CHAR DES_UNROLL BF_PTR:asm/sparcv8plus-gcc27.o:::asm/md5-sparcv8plus-gcc27.o:", +"solaris-sparcv9-gcc27","gcc:-mv8 -O3 -fomit-frame-pointer -Wall -DB_ENDIAN -DBN_DIV2W -DULTRASPARC::-D_REENTRANT:-lsocket -lnsl:BN_LLONG RC4_CHAR RC4_CHUNK DES_UNROLL BF_PTR:asm/sparcv8plus-gcc27.o:::asm/md5-sparcv8plus-gcc27.o:", #### -"debug-solaris-sparcv8-gcc","gcc:-DREF_CHECK -DCRYPTO_MDEBUG_ALL -O -g -mv8 -Wall -DB_ENDIAN::-D_REENTRANT:-lsocket -lnsl:BN_LLONG RC4_CHAR DES_UNROLL BF_PTR:::", -"debug-solaris-sparcv9-gcc","gcc:-DREF_CHECK -DCRYPTO_MDEBUG_ALL -O -g -mcpu=ultrasparc -Wall -DB_ENDIAN::-D_REENTRANT:-lsocket -lnsl:BN_LLONG RC4_CHAR DES_UNROLL BF_PTR:asm/sparcv8plus.o::", +"debug-solaris-sparcv8-gcc","gcc:-DREF_CHECK -DBN_CTX_DEBUG -DCRYPTO_MDEBUG_ALL -O -g -mv8 -Wall -DB_ENDIAN::-D_REENTRANT:-lsocket -lnsl:BN_LLONG RC4_CHAR RC4_CHUNK DES_UNROLL BF_PTR:asm/sparcv8.o::", +"debug-solaris-sparcv9-gcc","gcc:-DREF_CHECK -DBN_CTX_DEBUG -DCRYPTO_MDEBUG_ALL -O -g -mcpu=ultrasparc -Wall -DB_ENDIAN::-D_REENTRANT:-lsocket -lnsl:BN_LLONG RC4_CHAR RC4_CHUNK DES_UNROLL BF_PTR:asm/sparcv8plus.o::", #### SPARC Solaris with Sun C setups # DO NOT use /xO[34] on sparc with SC3.0. It is broken, and will not pass the tests -"solaris-sparc-sc3","cc:-fast -O -Xa -DB_ENDIAN::-D_REENTRANT:-lsocket -lnsl:BN_LLONG RC4_CHAR DES_PTR DES_UNROLL BF_PTR:::", +"solaris-sparc-sc3","cc:-fast -O -Xa -DB_ENDIAN::-D_REENTRANT:-lsocket -lnsl:BN_LLONG RC4_CHAR RC4_CHUNK DES_PTR DES_UNROLL BF_PTR:::", # SC4.0 doesn't pass 'make test', upgrade to SC5.0 or SC4.2. # SC4.2 is ok, better than gcc even on bn as long as you tell it -xarch=v8 # SC5.0 note: Compiler common patch 107357-01 or later is required! -"solaris-sparcv7-cc","cc:-xO5 -xstrconst -xdepend -Xa -DB_ENDIAN -DBN_DIV2W::-D_REENTRANT:-lsocket -lnsl:BN_LLONG RC4_CHAR DES_PTR DES_RISC1 DES_UNROLL BF_PTR:::", -"solaris-sparcv8-cc","cc:-xarch=v8 -xO5 -xstrconst -xdepend -Xa -DB_ENDIAN -DBN_DIV2W::-D_REENTRANT:-lsocket -lnsl:BN_LLONG RC4_CHAR DES_PTR DES_RISC1 DES_UNROLL BF_PTR:asm/sparcv8.o::", -"solaris-sparcv9-cc","cc:-xtarget=ultra -xarch=v8plus -xO5 -xstrconst -xdepend -Xa -DB_ENDIAN -DBN_DIV2W -DULTRASPARC::-D_REENTRANT:-lsocket -lnsl:BN_LLONG RC4_CHAR DES_PTR DES_RISC1 DES_UNROLL BF_PTR:asm/sparcv8plus.o:::asm/md5-sparcv8plus.o:", -"solaris64-sparcv9-cc","cc:-xtarget=ultra -xarch=v9 -xO5 -xstrconst -xdepend -Xa -DB_ENDIAN -DULTRASPARC::-D_REENTRANT:-lsocket -lnsl:SIXTY_FOUR_BIT_LONG RC4_CHAR DES_INT DES_PTR DES_RISC1 DES_UNROLL BF_PTR::::asm/md5-sparcv9.o:", +"solaris-sparcv7-cc","cc:-xO5 -xstrconst -xdepend -Xa -DB_ENDIAN -DBN_DIV2W::-D_REENTRANT:-lsocket -lnsl:BN_LLONG RC4_CHAR RC4_CHUNK DES_PTR DES_RISC1 DES_UNROLL BF_PTR:::", +"solaris-sparcv8-cc","cc:-xarch=v8 -xO5 -xstrconst -xdepend -Xa -DB_ENDIAN -DBN_DIV2W::-D_REENTRANT:-lsocket -lnsl:BN_LLONG RC4_CHAR RC4_CHUNK DES_PTR DES_RISC1 DES_UNROLL BF_PTR:asm/sparcv8.o::", +"solaris-sparcv9-cc","cc:-xtarget=ultra -xarch=v8plus -xO5 -xstrconst -xdepend -Xa -DB_ENDIAN -DBN_DIV2W -DULTRASPARC::-D_REENTRANT:-lsocket -lnsl:BN_LLONG RC4_CHAR RC4_CHUNK_LL DES_PTR DES_RISC1 DES_UNROLL BF_PTR:asm/sparcv8plus.o:::asm/md5-sparcv8plus.o:", +"solaris64-sparcv9-cc","cc:-xtarget=ultra -xarch=v9 -xO5 -xstrconst -xdepend -Xa -DB_ENDIAN -DULTRASPARC::-D_REENTRANT:-lsocket -lnsl:SIXTY_FOUR_BIT_LONG RC4_CHAR RC4_CHUNK DES_INT DES_PTR DES_RISC1 DES_UNROLL BF_PTR::::asm/md5-sparcv9.o:", +#### +"debug-solaris-sparcv8-cc","cc:-DREF_CHECK -DBN_CTX_DEBUG -DCRYPTO_MDEBUG_ALL -xarch=v8 -g -O -xstrconst -Xa -DB_ENDIAN -DBN_DIV2W::-D_REENTRANT:-lsocket -lnsl:BN_LLONG RC4_CHAR RC4_CHUNK DES_PTR DES_RISC1 DES_UNROLL BF_PTR:asm/sparcv8.o::", +"debug-solaris-sparcv9-cc","cc:-DREF_CHECK -DBN_CTX_DEBUG -DCRYPTO_MDEBUG_ALL -xtarget=ultra -xarch=v8plus -g -O -xstrconst -Xa -DB_ENDIAN -DBN_DIV2W -DULTRASPARC::-D_REENTRANT:-lsocket -lnsl:BN_LLONG RC4_CHAR RC4_CHUNK_LL DES_PTR DES_RISC1 DES_UNROLL BF_PTR:asm/sparcv8plus.o:::asm/md5-sparcv8plus.o:", #### SPARC Linux setups -"linux-sparcv7","gcc:-DB_ENDIAN -DTERMIO -O3 -fomit-frame-pointer -Wall::-D_REENTRANT::BN_LLONG RC4_CHAR DES_UNROLL BF_PTR::", +"linux-sparcv7","gcc:-DB_ENDIAN -DTERMIO -O3 -fomit-frame-pointer -Wall::-D_REENTRANT::BN_LLONG RC4_CHAR RC4_CHUNK DES_UNROLL BF_PTR::", # Ray Miller <ray.miller@computing-services.oxford.ac.uk> has patiently # assisted with debugging of following two configs. -"linux-sparcv8","gcc:-mv8 -DB_ENDIAN -DTERMIO -O3 -fomit-frame-pointer -Wall -DBN_DIV2W::-D_REENTRANT::BN_LLONG RC4_CHAR DES_UNROLL BF_PTR:asm/sparcv8.o::::", +"linux-sparcv8","gcc:-mv8 -DB_ENDIAN -DTERMIO -O3 -fomit-frame-pointer -Wall -DBN_DIV2W::-D_REENTRANT::BN_LLONG RC4_CHAR RC4_CHUNK DES_UNROLL BF_PTR:asm/sparcv8.o::::", # it's a real mess with -mcpu=ultrasparc option under Linux, but # -Wa,-Av8plus should do the trick no matter what. -"linux-sparcv9","gcc:-mcpu=ultrasparc -DB_ENDIAN -DTERMIO -O3 -fomit-frame-pointer -Wall -Wa,-Av8plus -DULTRASPARC -DBN_DIV2W::-D_REENTRANT::BN_LLONG RC4_CHAR DES_UNROLL BF_PTR:asm/sparcv8plus.o:::asm/md5-sparcv8plus.o:", +"linux-sparcv9","gcc:-mcpu=ultrasparc -DB_ENDIAN -DTERMIO -O3 -fomit-frame-pointer -Wall -Wa,-Av8plus -DULTRASPARC -DBN_DIV2W::-D_REENTRANT::BN_LLONG RC4_CHAR RC4_CHUNK DES_UNROLL BF_PTR:asm/sparcv8plus.o:::asm/md5-sparcv8plus.o:", # !!!Folowing can't be even tested yet!!! # We have to wait till 64-bit glibc for SPARC is operational!!! -#"linux64-sparcv9","sparc64-linux-gcc:-m64 -mcpu=v9 -DB_ENDIAN -DTERMIO -O3 -fomit-frame-pointer -Wall -DULTRASPARC -DBN_DIV2W::-D_REENTRANT::BN_LLONG RC4_CHAR DES_UNROLL BF_PTR::::asm/md5-sparcv9.o:", +#"linux64-sparcv9","sparc64-linux-gcc:-m64 -mcpu=v9 -DB_ENDIAN -DTERMIO -O3 -fomit-frame-pointer -Wall -DULTRASPARC -DBN_DIV2W::-D_REENTRANT::BN_LLONG RC4_CHAR RC4_CHUNK DES_UNROLL BF_PTR::::asm/md5-sparcv9.o:", # Sunos configs, assuming sparc for the gcc one. ##"sunos-cc", "cc:-O4 -DNOPROTO -DNOCONST::(unknown)::DES_UNROLL:::", -"sunos-gcc","gcc:-O3 -mv8::(unknown)::BN_LLONG RC4_CHAR DES_UNROLL DES_PTR DES_RISC1:::", +"sunos-gcc","gcc:-O3 -mv8 -Dssize_t=int::(unknown)::BN_LLONG RC4_CHAR RC4_CHUNK DES_UNROLL DES_PTR DES_RISC1:::", #### IRIX 5.x configs # -mips2 flag is added by ./config when appropriate. -"irix-gcc","gcc:-O3 -DTERMIOS -DB_ENDIAN::(unknown)::BN_LLONG MD2_CHAR RC4_INDEX RC4_CHAR DES_UNROLL DES_RISC2 DES_PTR BF_PTR:::", -"irix-cc", "cc:-O2 -use_readonly_const -DTERMIOS -DB_ENDIAN::(unknown)::BN_LLONG DES_PTR DES_RISC2 DES_UNROLL BF_PTR:::", +"irix-gcc","gcc:-O3 -DTERMIOS -DB_ENDIAN::(unknown)::BN_LLONG MD2_CHAR RC4_INDEX RC4_CHAR RC4_CHUNK DES_UNROLL DES_RISC2 DES_PTR BF_PTR:::", +"irix-cc", "cc:-O2 -use_readonly_const -DTERMIOS -DB_ENDIAN::(unknown)::BN_LLONG RC4_CHAR RC4_CHUNK DES_PTR DES_RISC2 DES_UNROLL BF_PTR:::", #### IRIX 6.x configs # Only N32 and N64 ABIs are supported. If you need O32 ABI build, invoke # './Configure irix-[g]cc' manually. # -mips4 flag is added by ./config when appropriate. -"irix-mips3-gcc","gcc:-mabi=n32 -mmips-as -O3 -DTERMIOS -DB_ENDIAN::(unknown)::MD2_CHAR RC4_INDEX RC4_CHAR DES_UNROLL DES_RISC2 DES_PTR BF_PTR SIXTY_FOUR_BIT:asm/mips3.o::", -"irix-mips3-cc", "cc:-n32 -O2 -use_readonly_const -DTERMIOS -DB_ENDIAN::(unknown)::DES_PTR DES_RISC2 DES_UNROLL BF_PTR SIXTY_FOUR_BIT:asm/mips3.o::", +"irix-mips3-gcc","gcc:-mabi=n32 -mmips-as -O3 -DTERMIOS -DB_ENDIAN -DBN_DIV3W::(unknown)::MD2_CHAR RC4_INDEX RC4_CHAR RC4_CHUNK_LL DES_UNROLL DES_RISC2 DES_PTR BF_PTR SIXTY_FOUR_BIT:asm/mips3.o::", +"irix-mips3-cc", "cc:-n32 -O2 -use_readonly_const -DTERMIOS -DB_ENDIAN -DBN_DIV3W::(unknown)::DES_PTR RC4_CHAR RC4_CHUNK_LL DES_RISC2 DES_UNROLL BF_PTR SIXTY_FOUR_BIT:asm/mips3.o::", # N64 ABI builds. -"irix64-mips4-gcc","gcc:-mabi=64 -mips4 -mmips-as -O3 -DTERMIOS -DB_ENDIAN::(unknown)::DES_RISC2 DES_UNROLL SIXTY_FOUR_BIT_LONG:asm/mips3.o::", -"irix64-mips4-cc", "cc:-64 -mips4 -O2 -use_readonly_const -DTERMIOS -DB_ENDIAN::(unknown)::DES_RISC2 DES_UNROLL SIXTY_FOUR_BIT_LONG:asm/mips3.o::", +"irix64-mips4-gcc","gcc:-mabi=64 -mips4 -mmips-as -O3 -DTERMIOS -DB_ENDIAN -DBN_DIV3W::(unknown)::RC4_CHAR RC4_CHUNK DES_RISC2 DES_UNROLL SIXTY_FOUR_BIT_LONG:asm/mips3.o::", +"irix64-mips4-cc", "cc:-64 -mips4 -O2 -use_readonly_const -DTERMIOS -DB_ENDIAN -DBN_DIV3W::(unknown)::RC4_CHAR RC4_CHUNK DES_RISC2 DES_UNROLL SIXTY_FOUR_BIT_LONG:asm/mips3.o::", + +#### Unified HP-UX ANSI C configs. +# Special notes: +# - Originally we were optimizing at +O4 level. It should be noted +# that the only difference between +O3 and +O4 is global inter- +# procedural analysis. As it has to be performed during the link +# stage the compiler leaves behind certain pseudo-code in lib*.a +# which might be release or even patch level specific. Generating +# the machine code for and analyzing the *whole* program appears +# to be *extremely* memory demanding while the performance gain is +# actually questionable. The situation is intensified by the default +# HP-UX data set size limit (infamous 'maxdsiz' tunable) of 64MB +# which is way too low for +O4. In other words, doesn't +O3 make +# more sense? +# - Keep in mind that the HP compiler by default generates code +# suitable for execution on the host you're currently compiling at. +# If the toolkit is ment to be used on various PA-RISC processors +# consider './config +Dportable'. +# - +DD64 is chosen in favour of +DA2.0W because it's ment to be +# compatible with *future* releases. +# - If you run ./Configure hpux-parisc-[g]cc manually don't forget to +# pass -D_REENTRANT on HP-UX 10 and later. +# - -DMD32_XARRAY triggers workaround for compiler bug we ran into in +# 32-bit message digests. (For the moment of this writing) HP C +# doesn't seem to "digest" too many local variables (they make "him" +# chew forever:-). For more details look-up MD32_XARRAY comment in +# crypto/sha/sha_lcl.h. +# <appro@fy.chalmers.se> +# +"hpux-parisc-cc","cc:-Ae +O3 +ESlit -z -DB_ENDIAN -DBN_DIV2W -DMD32_XARRAY::::BN_LLONG DES_PTR DES_UNROLL DES_RISC1:::", +# Since there is mention of this in shlib/hpux10-cc.sh +"hpux-parisc-cc-o4","cc:-Ae +O4 +ESlit -z -DB_ENDIAN -DBN_DIV2W -DMD32_XARRAY::::BN_LLONG DES_PTR DES_UNROLL DES_RISC1:::", +"hpux-parisc-gcc","gcc:-O3 -DB_ENDIAN -DBN_DIV2W::::BN_LLONG DES_PTR DES_UNROLL DES_RISC1:::", +"hpux64-parisc-cc","cc:-Ae +DD64 +O3 +ESlit -z -DB_ENDIAN -DMD32_XARRAY::-D_REENTRANT::SIXTY_FOUR_BIT_LONG MD2_CHAR RC4_INDEX RC4_CHAR DES_UNROLL DES_RISC1 DES_INT:::", # HPUX 9.X config. # Don't use the bundled cc. It is broken. Use HP ANSI C if possible, or # egcs. gcc 2.8.1 is also broken. -"hpux-cc", "cc:-DB_ENDIAN -DBN_DIV2W -Ae +ESlit +O4 -z::(unknown)::BN_LLONG DES_PTR DES_UNROLL DES_RISC1:::", +"hpux-cc", "cc:-DB_ENDIAN -DBN_DIV2W -DMD32_XARRAY -Ae +ESlit +O3 -z::(unknown)::BN_LLONG DES_PTR DES_UNROLL DES_RISC1:::", # If hpux-cc fails (e.g. during "make test"), try the next one; otherwise, -# please report your OS and compiler version to the bugs@openssl.org +# please report your OS and compiler version to the openssl-bugs@openssl.org # mailing list. "hpux-brokencc", "cc:-DB_ENDIAN -DBN_DIV2W -Ae +ESlit +O2 -z::(unknown)::DES_PTR DES_UNROLL DES_RISC1:::", @@ -174,7 +223,7 @@ my %table=( "hpux-brokengcc", "gcc:-DB_ENDIAN -DBN_DIV2W -O3::(unknown)::DES_PTR DES_UNROLL DES_RISC1:::", # HPUX 10.X config. Supports threads. -"hpux10-cc", "cc:-DB_ENDIAN -DBN_DIV2W -Ae +ESlit +O4 -z::-D_REENTRANT::BN_LLONG DES_PTR DES_UNROLL DES_RISC1:::", +"hpux10-cc", "cc:-DB_ENDIAN -DBN_DIV2W -DMD32_XARRAY -Ae +ESlit +O3 -z::-D_REENTRANT::BN_LLONG DES_PTR DES_UNROLL DES_RISC1:::", # If hpux10-cc fails, try this one (if still fails, try deleting BN_LLONG): "hpux10-brokencc", "cc:-DB_ENDIAN -DBN_DIV2W -Ae +ESlit +O2 -z::-D_REENTRANT::BN_LLONG DES_PTR DES_UNROLL DES_RISC1:::", @@ -184,46 +233,66 @@ my %table=( # HPUX 11.X from www.globus.org. # Only works on PA-RISC 2.0 cpus, and not optimized. Why? -"hpux11-32bit-cc","cc:+DA2.0 -DB_ENDIAN -D_HPUX_SOURCE -Aa -Ae +ESlit::-D_REENTRANT::DES_PTR DES_UNROLL DES_RISC1:::", -"hpux11-64bit-cc","cc:+DA2.0W -g -D_HPUX_SOURCE -Aa -Ae +ESlit::-D_REENTRANT::SIXTY_FOUR_BIT_LONG MD2_CHAR RC4_INDEX RC4_CHAR DES_UNROLL DES_RISC1 DES_INT :::", +#"hpux11-32bit-cc","cc:+DA2.0 -DB_ENDIAN -D_HPUX_SOURCE -Aa -Ae +ESlit::-D_REENTRANT::DES_PTR DES_UNROLL DES_RISC1:::", +#"hpux11-64bit-cc","cc:+DA2.0W -g -D_HPUX_SOURCE -Aa -Ae +ESlit::-D_REENTRANT::SIXTY_FOUR_BIT_LONG MD2_CHAR RC4_INDEX RC4_CHAR DES_UNROLL DES_RISC1 DES_INT :::", +# Use unified settings above instead. # Dec Alpha, OSF/1 - the alpha164-cc is the flags for a 21164A with # the new compiler # For gcc, the following gave a %50 speedup on a 164 over the 'DES_INT' version -"alpha-gcc","gcc:-O3::(unknown)::SIXTY_FOUR_BIT_LONG DES_UNROLL DES_RISC1:::", -"alpha-cc", "cc:-std1 -tune host -O4 -readonly_strings::(unknown)::SIXTY_FOUR_BIT_LONG:::", -"alpha164-cc", "cc:-std1 -tune host -fast -readonly_strings::(unknown)::SIXTY_FOUR_BIT_LONG:::", -"FreeBSD-alpha","gcc:-DTERMIOS -O3 -fomit-frame-pointer::(unknown)::SIXTY_FOUR_BIT_LONG DES_INT DES_PTR DES_RISC2:::", +"alpha-gcc","gcc:-O3::(unknown)::SIXTY_FOUR_BIT_LONG RC4_CHUNK DES_UNROLL DES_RISC1:asm/alpha.o::", +"alpha-cc", "cc:-std1 -tune host -O4 -readonly_strings::(unknown)::SIXTY_FOUR_BIT_LONG RC4_CHUNK:asm/alpha.o::", +"alpha164-cc", "cc:-std1 -tune host -fast -readonly_strings::(unknown)::SIXTY_FOUR_BIT_LONG RC4_CHUNK:asm/alpha.o::", +"FreeBSD-alpha","gcc:-DTERMIOS -O3 -fomit-frame-pointer::(unknown)::SIXTY_FOUR_BIT_LONG RC4_CHUNK DES_INT DES_PTR DES_RISC2:::", + +#### Alpha Linux with GNU C and Compaq C setups +# Special notes: +# - linux-alpha+bwx-gcc is ment to be used from ./config only. If you +# ought to run './Configure linux-alpha+bwx-gcc' manually, do +# complement the command line with -mcpu=ev56, -mcpu=ev6 or whatever +# which is appropriate. +# - If you use ccc keep in mind that -fast implies -arch host and the +# compiler is free to issue instructions which gonna make elder CPU +# choke. If you wish to build "blended" toolkit, add -arch generic +# *after* -fast and invoke './Configure linux-alpha-ccc' manually. +# +# <appro@fy.chalmers.se> +# +"linux-alpha-gcc","gcc:-O3 -DL_ENDIAN -DTERMIO::(unknown)::SIXTY_FOUR_BIT_LONG RC4_CHUNK DES_RISC1 DES_UNROLL:asm/alpha.o::", +"linux-alpha+bwx-gcc","gcc:-O3 -DL_ENDIAN -DTERMIO::(unknown)::SIXTY_FOUR_BIT_LONG RC4_CHAR RC4_CHUNK DES_RISC1 DES_UNROLL:asm/alpha.o::", +"linux-alpha-ccc","ccc:-fast -readonly_strings -DL_ENDIAN -DTERMIO::(unknown)::SIXTY_FOUR_BIT_LONG RC4_CHUNK DES_INT DES_PTR DES_RISC1 DES_UNROLL:asm/alpha.o::", +"linux-alpha+bwx-ccc","ccc:-fast -readonly_strings -DL_ENDIAN -DTERMIO::(unknown)::SIXTY_FOUR_BIT_LONG RC4_CHAR RC4_CHUNK DES_INT DES_PTR DES_RISC1 DES_UNROLL:asm/alpha.o::", # assembler versions -- currently defunct: -##"alpha-gcc","gcc:-O3::(unknown)::SIXTY_FOUR_BIT_LONG DES_UNROLL DES_RISC1:asm/alpha.o::", -##"alpha-cc", "cc:-tune host -O4 -readonly_strings::(unknown)::SIXTY_FOUR_BIT_LONG:asm/alpha.o::", -##"alpha164-cc", "cc:-tune host -fast -readonly_strings::(unknown)::SIXTY_FOUR_BIT_LONG:asm/alpha.o::", ##"OpenBSD-alpha","gcc:-DTERMIOS -O3 -fomit-frame-pointer::(unknown):SIXTY_FOUR_BIT_LONG DES_INT DES_PTR DES_RISC2:asm/alpha.o::", # The intel boxes :-), It would be worth seeing if bsdi-gcc can use the # bn86-elf.o file file since it is hand tweaked assembler. -"linux-elf", "gcc:-DL_ENDIAN -DTERMIO -O3 -fomit-frame-pointer -m486 -Wall::-D_REENTRANT::BN_LLONG $x86_gcc_des $x86_gcc_opts:$x86_elf_asm", -"debug-linux-elf","gcc:-DREF_CHECK -DCRYPTO_MDEBUG -DL_ENDIAN -DTERMIO -g -m486 -Wall::-D_REENTRANT:-lefence:BN_LLONG $x86_gcc_des $x86_gcc_opts:$x86_elf_asm", -"linux-aout", "gcc:-DL_ENDIAN -DTERMIO -O3 -fomit-frame-pointer -m486 -Wall::(unknown)::BN_LLONG $x86_gcc_des $x86_gcc_opts:$x86_out_asm", +"linux-elf", "gcc:-DL_ENDIAN -DTERMIO -O3 -fomit-frame-pointer -m486 -Wall::-D_REENTRANT::BN_LLONG ${x86_gcc_des} ${x86_gcc_opts}:${x86_elf_asm}", +"debug-linux-elf","gcc:-DREF_CHECK -DBN_CTX_DEBUG -DCRYPTO_MDEBUG -DL_ENDIAN -DTERMIO -g -m486 -Wall::-D_REENTRANT:-lefence:BN_LLONG ${x86_gcc_des} ${x86_gcc_opts}:${x86_elf_asm}", +"linux-aout", "gcc:-DL_ENDIAN -DTERMIO -O3 -fomit-frame-pointer -m486 -Wall::(unknown)::BN_LLONG ${x86_gcc_des} ${x86_gcc_opts}:${x86_out_asm}", "linux-mips", "gcc:-DL_ENDIAN -DTERMIO -O3 -fomit-frame-pointer -Wall::(unknown)::BN_LLONG:::", -"linux-ppc", "gcc:-DB_ENDIAN -DTERMIO -O3 -fomit-frame-pointer -Wall::(unknown)::::", +"linux-ppc", "gcc:-DB_ENDIAN -DTERMIO -O3 -fomit-frame-pointer -Wall::-D_REENTRANT::BN_LLONG::", +"linux-ia64", "gcc:-DL_ENDIAN -DTERMIO -O3 -fomit-frame-pointer -Wall::(unknown)::SIXTY_FOUR_BIT_LONG::", "NetBSD-sparc", "gcc:-DTERMIOS -O3 -fomit-frame-pointer -mv8 -Wall -DB_ENDIAN::(unknown)::BN_LLONG MD2_CHAR RC4_INDEX DES_UNROLL:::", "NetBSD-m68", "gcc:-DTERMIOS -O3 -fomit-frame-pointer -Wall -DB_ENDIAN::(unknown)::BN_LLONG MD2_CHAR RC4_INDEX DES_UNROLL:::", -"NetBSD-x86", "gcc:-DTERMIOS -O3 -fomit-frame-pointer -m486 -Wall::(unknown)::BN_LLONG $x86_gcc_des $x86_gcc_opts:", -"FreeBSD-elf", "gcc:-DTERMIOS -DL_ENDIAN -fomit-frame-pointer -O3 -m486 -Wall::(unknown)::BN_LLONG $x86_gcc_des $x86_gcc_opts:$x86_elf_asm", -"FreeBSD", "gcc:-DTERMIOS -DL_ENDIAN -fomit-frame-pointer -O3 -m486 -Wall::(unknown)::BN_LLONG $x86_gcc_des $x86_gcc_opts:$x86_out_asm", -"bsdi-gcc", "gcc:-O3 -ffast-math -DL_ENDIAN -DPERL5 -m486::(unknown)::RSA_LLONG $x86_gcc_des $x86_gcc_opts:$x86_bsdi_asm", -"bsdi-elf-gcc", "gcc:-DPERL5 -DL_ENDIAN -fomit-frame-pointer -O3 -m486 -Wall::(unknown)::BN_LLONG $x86_gcc_des $x86_gcc_opts:$x86_elf_asm", -"nextstep", "cc:-O -Wall:<libc.h>:(unknown)::BN_LLONG $x86_gcc_des ${x86_gcc_opts}:::", -"nextstep3.3", "cc:-O3 -Wall:<libc.h>:(unknown)::BN_LLONG $x86_gcc_des ${x86_gcc_opts}:::", +"NetBSD-x86", "gcc:-DTERMIOS -O3 -fomit-frame-pointer -m486 -Wall::(unknown)::BN_LLONG ${x86_gcc_des} ${x86_gcc_opts}:", +"FreeBSD-elf", "gcc:-DTERMIOS -DL_ENDIAN -fomit-frame-pointer -O3 -m486 -Wall::(unknown)::BN_LLONG ${x86_gcc_des} ${x86_gcc_opts}:${x86_elf_asm}", +"FreeBSD", "gcc:-DTERMIOS -DL_ENDIAN -fomit-frame-pointer -O3 -m486 -Wall::(unknown)::BN_LLONG ${x86_gcc_des} ${x86_gcc_opts}:${x86_out_asm}", +"bsdi-gcc", "gcc:-O3 -ffast-math -DL_ENDIAN -DPERL5 -m486::(unknown)::RSA_LLONG ${x86_gcc_des} ${x86_gcc_opts}:${x86_bsdi_asm}", +"bsdi-elf-gcc", "gcc:-DPERL5 -DL_ENDIAN -fomit-frame-pointer -O3 -m486 -Wall::(unknown)::BN_LLONG ${x86_gcc_des} ${x86_gcc_opts}:${x86_elf_asm}", +"nextstep", "cc:-O -Wall:<libc.h>:(unknown)::BN_LLONG ${x86_gcc_des} ${x86_gcc_opts}:::", +"nextstep3.3", "cc:-O3 -Wall:<libc.h>:(unknown)::BN_LLONG ${x86_gcc_des} ${x86_gcc_opts}:::", # NCR MP-RAS UNIX ver 02.03.01 -"ncr-scde","cc:-O6 -Xa -Hoff=BEHAVED -686 -Hwide -Hiw::(unknown):-lsocket -lnsl:$x86_gcc_des ${x86_gcc_opts}:::", +"ncr-scde","cc:-O6 -Xa -Hoff=BEHAVED -686 -Hwide -Hiw::(unknown):-lsocket -lnsl:${x86_gcc_des} ${x86_gcc_opts}:::", # UnixWare 2.0 -"unixware-2.0","cc:-O -DFILIO_H::(unknown):-lsocket -lnsl:$x86_gcc_des ${x86_gcc_opts}:::", +"unixware-2.0","cc:-O -DFILIO_H::(unknown):-lsocket -lnsl:${x86_gcc_des} ${x86_gcc_opts}:::", "unixware-2.0-pentium","cc:-O -DFILIO_H -Kpentium -Kthread::(unknown):-lsocket -lnsl:MD2_CHAR RC4_INDEX ${x86_gcc_des}::", +# UnixWare 7 +"unixware-7","cc:-O -DFILIO_H -Kalloca::-Kthread:-lsocket -lnsl:MD2_CHAR RC4_INDEX ${x86_gcc_des}::", + # IBM's AIX. "aix-cc", "cc:-O -DAIX -DB_ENDIAN::(unknown)::BN_LLONG RC4_CHAR:::", "aix-gcc", "gcc:-O3 -DAIX -DB_ENDIAN::(unknown)::BN_LLONG RC4_CHAR:::", @@ -249,17 +318,17 @@ my %table=( # for some st_addr stuff, and then sizeof and address-of fails # I could not use the ams/alpha.o option because the Cray assembler, 'cam' # did not like it. -"cray-t3e", "cc: -DBIT_FIELD_LIMITS -DTERMIOS::(unknown)::SIXTY_FOUR_BIT_LONG DES_INT:::", +"cray-t3e", "cc: -DBIT_FIELD_LIMITS -DTERMIOS::(unknown)::SIXTY_FOUR_BIT_LONG RC4_CHUNK DES_INT:::", # DGUX, 88100. "dgux-R3-gcc", "gcc:-O3 -fomit-frame-pointer::(unknown)::RC4_INDEX DES_UNROLL:::", "dgux-R4-gcc", "gcc:-O3 -fomit-frame-pointer::(unknown):-lnsl -lsocket:RC4_INDEX:RC4_INDEX DES_UNROLL:::", -"dgux-R4-x86-gcc", "gcc:-O3 -fomit-frame-pointer -DL_ENDIAN::(unknown):-lnsl -lsocket:BN_LLONG $x86_gcc_des $x86_gcc_opts:$x86_elf_asm", +"dgux-R4-x86-gcc", "gcc:-O3 -fomit-frame-pointer -DL_ENDIAN::(unknown):-lnsl -lsocket:BN_LLONG ${x86_gcc_des} ${x86_gcc_opts}:${x86_elf_asm}", # SCO 5 - Ben Laurie <ben@algroup.co.uk> says the -O breaks the # SCO cc. -"sco5-cc", "cc:::(unknown):-lsocket:$x86_gcc_des ${x86_gcc_opts}:::", # des options? -"sco5-gcc", "gcc:-O3 -fomit-frame-pointer::(unknown):-lsocket:BN_LLONG $x86_gcc_des ${x86_gcc_opts}:::", # the SCO assembler doesn't seem to like our assembler files ... +"sco5-cc", "cc:::(unknown):-lsocket:${x86_gcc_des} ${x86_gcc_opts}:::", # des options? +"sco5-gcc", "gcc:-O3 -fomit-frame-pointer::(unknown):-lsocket:BN_LLONG ${x86_gcc_des} ${x86_gcc_opts}:::", # the SCO assembler doesn't seem to like our assembler files ... # Sinix/ReliantUNIX RM400 # NOTE: The CDS++ Compiler up to V2.0Bsomething has the IRIX_CC_BUG optimizer problem. Better use -g */ @@ -268,7 +337,7 @@ my %table=( "SINIX-N","/usr/ucb/cc:-O2 -misaligned::(unknown):-lucb:RC4_INDEX RC4_CHAR:::", # SIEMENS BS2000/OSD: an EBCDIC-based mainframe -"BS2000-OSD","c89:-XLLML -XLLMK -XL -DB_ENDIAN -DTERMIOS -DCHARSET_EBCDIC::(unknown):-lsocket -lnsl:THIRTY_TWO_BIT DES_PTR DES_UNROLL MD2_CHAR RC4_INDEX RC4_CHAR BF_PTR:::", +"BS2000-OSD","c89:-O -XLLML -XLLMK -XL -DB_ENDIAN -DTERMIOS -DCHARSET_EBCDIC::(unknown):-lsocket -lnsl:THIRTY_TWO_BIT DES_PTR DES_UNROLL MD2_CHAR RC4_INDEX RC4_CHAR BF_PTR:::", # Windows NT, Microsoft Visual C++ 4.0 @@ -286,8 +355,8 @@ my %table=( # CygWin32 # (Note: the real CFLAGS for Windows builds are defined by util/mk1mf.pl # and its library files in util/pl/*) -"CygWin32", "gcc:-DTERMIOS -DL_ENDIAN -fomit-frame-pointer -O3 -m486 -Wall::::BN_LLONG $x86_gcc_des $x86_gcc_opts:", -"Mingw32", "gcc:-DL_ENDIAN -fomit-frame-pointer -O3 -m486 -Wall::::BN_LLONG $x86_gcc_des $x86_gcc_opts:", +"CygWin32", "gcc:-DTERMIOS -DL_ENDIAN -fomit-frame-pointer -O3 -m486 -Wall::::BN_LLONG ${x86_gcc_des} ${x86_gcc_opts}:", +"Mingw32", "gcc:-DL_ENDIAN -fomit-frame-pointer -O3 -m486 -Wall::::BN_LLONG ${x86_gcc_des} ${x86_gcc_opts}:", # Ultrix from Bernhard Simon <simon@zid.tuwien.ac.at> "ultrix-cc","cc:-std1 -O -Olimit 1000 -DL_ENDIAN::(unknown)::::::", @@ -297,10 +366,13 @@ my %table=( # Some OpenBSD from Bob Beck <beck@obtuse.com> "OpenBSD-alpha","gcc:-DTERMIOS -O3 -fomit-frame-pointer::(unknown)::SIXTY_FOUR_BIT_LONG DES_INT DES_PTR DES_RISC2:::", -"OpenBSD-x86", "gcc:-DL_ENDIAN -DTERMIOS -O3 -fomit-frame-pointer -m486::(unknown)::BN_LLONG $x86_gcc_des $x86_gcc_opts:$x86_out_asm", +"OpenBSD-x86", "gcc:-DL_ENDIAN -DTERMIOS -O3 -fomit-frame-pointer -m486::(unknown)::BN_LLONG ${x86_gcc_des} ${x86_gcc_opts}:${x86_out_asm}", "OpenBSD", "gcc:-DTERMIOS -O3 -fomit-frame-pointer::(unknown)::BN_LLONG RC2_CHAR RC4_INDEX DES_UNROLL:::", "OpenBSD-mips","gcc:-O2 -DL_ENDIAN::(unknown):BN_LLONG MD2_CHAR RC4_INDEX RC4_CHAR DES_UNROLL DES_RISC2 DES_PTR BF_PTR::::", +##### MacOS X (a.k.a. Rhapsody) setup +"rhapsody-ppc-cc","cc:-O3 -DB_ENDIAN::(unknown)::BN_LLONG RC4_CHAR RC4_CHUNK DES_UNROLL BF_PTR:::", + ); my @WinTargets=qw(VC-NT VC-WIN32 VC-WIN16 VC-W31-16 VC-W31-32 VC-MSDOS BC-32 @@ -337,21 +409,27 @@ my $ranlib; my $perl; $ranlib=&which("ranlib") or $ranlib="true"; -$perl=&which("perl5") or $perl=&which("perl") or $perl="perl"; +$perl=$ENV{'PERL'} or $perl=&which("perl5") or $perl=&which("perl") + or $perl="perl"; &usage if ($#ARGV < 0); my $flags=""; my $depflags=""; +my $openssl_algorithm_defines=""; +my $openssl_thread_defines=""; +my $openssl_other_defines=""; my $libs=""; my $target=""; my $options=""; foreach (@ARGV) { + s /^-no-/no-/; # some people just can't read the instructions if (/^no-asm$/) { $no_asm=1; $flags .= "-DNO_ASM "; + $openssl_other_defines .= "#define NO_ASM\n"; } elsif (/^no-threads$/) { $no_threads=1; } @@ -364,11 +442,14 @@ foreach (@ARGV) $algo =~ tr/[a-z]/[A-Z]/; $flags .= "-DNO_$algo "; $depflags .= "-DNO_$algo "; + $openssl_algorithm_defines .= "#define NO_$algo\n"; if ($algo eq "DES") { + push @skip, "mdc2"; $options .= " no-mdc2"; $flags .= "-DNO_MDC2 "; $depflags .= "-DNO_MDC2 "; + $openssl_algorithm_defines .= "#define NO_MDC2\n"; } } elsif (/^386$/) @@ -377,6 +458,7 @@ foreach (@ARGV) { $libs.= "-lRSAglue -lrsaref "; $flags.= "-DRSAref "; + $openssl_other_defines .= "#define RSAref\n"; } elsif (/^[-+]/) { @@ -432,6 +514,14 @@ if ($target eq "TABLE") { exit 0; } +if ($target eq "LIST") { + foreach (sort keys %table) { + print; + print "\n"; + } + exit 0; +} + &usage if (!defined($table{$target})); my $IsWindows=scalar grep /^$target$/,@WinTargets; @@ -454,6 +544,7 @@ print "IsWindows=$IsWindows\n"; $cflags="$flags$cflags" if ($flags ne ""); my $thread_cflags; +my $thread_defines; if ($thread_cflag ne "(unknown)" && !$no_threads) { # If we know how to do it, support threads by default. @@ -463,11 +554,21 @@ if ($thread_cflag eq "(unknown)") { # If the user asked for "threads", hopefully they also provided # any system-dependent compiler options that are necessary. - $thread_cflags="-DTHREADS $cflags" + $thread_cflags="-DTHREADS $cflags" ; + $thread_defines .= "#define THREADS\n"; } else { - $thread_cflags="-DTHREADS $thread_cflag $cflags" + $thread_cflags="-DTHREADS $thread_cflag $cflags"; + $thread_defines .= "#define THREADS\n"; +# my $def; +# foreach $def (split ' ',$thread_cflag) +# { +# if ($def =~ s/^-D// && $def !~ /^_/) +# { +# $thread_defines .= "#define $def\n"; +# } +# } } $lflags="$libs$lflags"if ($libs ne ""); @@ -481,6 +582,7 @@ if ($no_asm) if ($threads) { $cflags=$thread_cflags; + $openssl_thread_defines .= $thread_defines; } #my ($bn1)=split(/\s+/,$bn_obj); @@ -530,6 +632,7 @@ if ($version =~ /(^[0-9]*)\.([0-9\.]*)/) open(IN,'<Makefile.org') || die "unable to read Makefile.org:$!\n"; open(OUT,">$Makefile") || die "unable to create $Makefile:$!\n"; +print OUT "### Generated automatically from Makefile.org by Configure.\n\n"; my $sdirs=0; while (<IN>) { @@ -598,6 +701,7 @@ my $md2_int=$def_int; my $idea_int=$def_int; my $rc2_int=$def_int; my $rc4_idx=0; +my $rc4_chunk=0; my $bf_ptr=0; my @type=("char","short","int","long"); my ($b64l,$b64,$b32,$b16,$b8)=(0,0,1,0,0); @@ -615,6 +719,8 @@ foreach (sort split(/\s+/,$bn_ops)) $rc4_int=0 if /RC4_CHAR/; $rc4_int=3 if /RC4_LONG/; $rc4_idx=1 if /RC4_INDEX/; + $rc4_chunk=1 if /RC4_CHUNK/; + $rc4_chunk=2 if /RC4_CHUNK_LL/; $md2_int=0 if /MD2_CHAR/; $md2_int=3 if /MD2_LONG/; $idea_int=1 if /IDEA_SHORT/; @@ -632,6 +738,18 @@ foreach (sort split(/\s+/,$bn_ops)) open(IN,'<crypto/opensslconf.h.in') || die "unable to read crypto/opensslconf.h.in:$!\n"; open(OUT,'>crypto/opensslconf.h') || die "unable to create crypto/opensslconf.h:$!\n"; +print OUT "/* opensslconf.h */\n"; +print OUT "/* WARNING: Generated automatically from opensslconf.h.in by Configure. */\n\n"; + +print OUT "/* OpenSSL was configured with the following options: */\n"; +$openssl_algorithm_defines =~ s/^\s*#\s*define\s+(.*)/# ifndef $1\n# define $1\n# endif/mg; +$openssl_algorithm_defines = " /* no ciphers excluded */\n" if $openssl_algorithm_defines eq ""; +$openssl_thread_defines =~ s/^\s*#\s*define\s+(.*)/# ifndef $1\n# define $1\n# endif/mg; +$openssl_other_defines =~ s/^\s*#\s*define\s+(.*)/# ifndef $1\n# define $1\n# endif/mg; +print OUT "#ifdef OPENSSL_ALGORITHM_DEFINES\n$openssl_algorithm_defines#endif\n"; +print OUT "#ifdef OPENSSL_THREAD_DEFINES\n$openssl_thread_defines#endif\n"; +print OUT "#ifdef OPENSSL_OTHER_DEFINES\n$openssl_other_defines#endif\n\n"; + while (<IN>) { if (/^#define\s+OPENSSLDIR/) @@ -666,6 +784,12 @@ while (<IN>) { printf OUT "#%s DES_UNROLL\n",($des_unroll)?'define':'undef'; } elsif (/^#define\s+RC4_INT\s/) { printf OUT "#define RC4_INT unsigned %s\n",$type[$rc4_int]; } + elsif (/^#undef\s+RC4_CHUNK/) + { + printf OUT "#undef RC4_CHUNK\n" if $rc4_chunk==0; + printf OUT "#define RC4_CHUNK unsigned long\n" if $rc4_chunk==1; + printf OUT "#define RC4_CHUNK unsigned long long\n" if $rc4_chunk==2; + } elsif (/^#((define)|(undef))\s+RC4_INDEX/) { printf OUT "#%s RC4_INDEX\n",($rc4_idx)?"define":"undef"; } elsif (/^#(define|undef)\s+I386_ONLY/) @@ -705,6 +829,9 @@ print "DES_INT used\n" if $des_int; print "BN_LLONG mode\n" if $bn_ll; print "RC4 uses u$type[$rc4_int]\n" if $rc4_int != $def_int; print "RC4_INDEX mode\n" if $rc4_idx; +print "RC4_CHUNK is undefined\n" if $rc4_chunk==0; +print "RC4_CHUNK is unsigned long\n" if $rc4_chunk==1; +print "RC4_CHUNK is unsigned long long\n" if $rc4_chunk==2; print "MD2 uses u$type[$md2_int]\n" if $md2_int != $def_int; print "IDEA uses u$type[$idea_int]\n" if $idea_int != $def_int; print "RC2 uses u$type[$rc2_int]\n" if $rc2_int != $def_int; @@ -723,8 +850,6 @@ if($IsWindows) { #endif EOF close(OUT); - - system "perl crypto/objects/obj_dat.pl <crypto\\objects\\objects.h >crypto\\objects\\obj_dat.h"; } else { (system "make -f Makefile.ssl PERL=\'$perl\' links") == 0 or exit $?; ### (system 'make depend') == 0 or exit $? if $depflags ne ""; @@ -733,43 +858,17 @@ EOF &dofile("tools/c_rehash",$openssldir,'^DIR=', 'DIR=%s',); if ( $perl =~ m@^/@) { &dofile("apps/der_chop",$perl,'^#!/', '#!%s'); + &dofile("apps/CA.pl",$perl,'^#!/', '#!%s'); } else { # No path for Perl known ... &dofile("apps/der_chop",'/usr/local/bin/perl','^#!/', '#!%s'); + &dofile("apps/CA.pl",'/usr/local/bin/perl','^#!/', '#!%s'); } } -my $pwd; - -if($IsWindows) { - $pwd="(current directory)"; -} else { - $pwd =`pwd`; - chop($pwd); -} print <<EOF; -NOTE: The OpenSSL header files have been moved from include/*.h -to include/openssl/*.h. To include OpenSSL header files, now -directives of the form - #include <openssl/foo.h> -should be used instead of #include <foo.h>. -These new file locations allow installing the OpenSSL header -files in /usr/local/include/openssl/ and should help avoid -conflicts with other libraries. - -To compile programs that use the old form <foo.h>, -usually an additional compiler option will suffice: E.g., add - -I$prefix/include/openssl -or - -I$pwd/include/openssl -to the CFLAGS in the Makefile of the program that you want to compile -(and leave all the original -I...'s in place!). - -Please make sure that no old OpenSSL header files are around: -The include directory should now be empty except for the openssl -subdirectory. - +Configured for $target. EOF print <<\EOF if (!$no_threads && !$threads); @@ -777,7 +876,6 @@ print <<\EOF if (!$no_threads && !$threads); The library could not be configured for supporting multi-threaded applications as the compiler options required on this system are not known. See file INSTALL for details if you need multi-threading. - EOF exit(0); @@ -785,22 +883,33 @@ exit(0); sub usage { print STDERR $usage; - print STDERR "pick os/compiler from:"; + print STDERR "\npick os/compiler from:\n"; my $j=0; my $i; + my $k=0; foreach $i (sort keys %table) { next if $i =~ /^debug/; - print STDERR "\n" if ($j++ % 4) == 0; - printf(STDERR "%-18s ",$i); + $k += length($i) + 1; + if ($k > 78) + { + print STDERR "\n"; + $k=length($i); + } + print STDERR $i . " "; } foreach $i (sort keys %table) { next if $i !~ /^debug/; - print STDERR "\n" if ($j++ % 4) == 0; - printf(STDERR "%-18s ",$i); + $k += length($i) + 1; + if ($k > 78) + { + print STDERR "\n"; + $k=length($i); + } + print STDERR $i . " "; } - print STDERR "\n"; + print STDERR "\n\nNOTE: If in doubt, on Unix-ish systems use './config'.\n"; exit(1); } @@ -830,12 +939,11 @@ sub dofile { grep(/$k/ && ($_=sprintf($m{$k}."\n",$p)),@a); } - ($ff=$f) =~ s/\..*$//; - open(OUT,">$ff.new") || die "unable to open $f:$!\n"; + open(OUT,">$f.new") || die "unable to open $f.new:$!\n"; print OUT @a; close(OUT); - rename($f,"$ff.bak") || die "unable to rename $f\n" if -e $f; - rename("$ff.new",$f) || die "unable to rename $ff.new\n"; + rename($f,"$f.bak") || die "unable to rename $f\n" if -e $f; + rename("$f.new",$f) || die "unable to rename $f.new\n"; } sub print_table_entry |