diff options
Diffstat (limited to 'crypto/openssl/crypto/sha/asm/sha1-586.pl')
| -rw-r--r-- | crypto/openssl/crypto/sha/asm/sha1-586.pl | 430 |
1 files changed, 0 insertions, 430 deletions
diff --git a/crypto/openssl/crypto/sha/asm/sha1-586.pl b/crypto/openssl/crypto/sha/asm/sha1-586.pl deleted file mode 100644 index 4f8521f1e2ca..000000000000 --- a/crypto/openssl/crypto/sha/asm/sha1-586.pl +++ /dev/null @@ -1,430 +0,0 @@ -#!/usr/local/bin/perl - -# It was noted that Intel IA-32 C compiler generates code which -# performs ~30% *faster* on P4 CPU than original *hand-coded* -# SHA1 assembler implementation. To address this problem (and -# prove that humans are still better than machines:-), the -# original code was overhauled, which resulted in following -# performance changes: -# -# compared with original compared with Intel cc -# assembler impl. generated code -# Pentium -16% +48% -# PIII/AMD +8% +16% -# P4 +85%(!) +45% -# -# As you can see Pentium came out as looser:-( Yet I reckoned that -# improvement on P4 outweights the loss and incorporate this -# re-tuned code to 0.9.7 and later. -# ---------------------------------------------------------------- -# Those who for any particular reason absolutely must score on -# Pentium can replace this module with one from 0.9.6 distribution. -# This "offer" shall be revoked the moment programming interface to -# this module is changed, in which case this paragraph should be -# removed. -# ---------------------------------------------------------------- -# <appro@fy.chalmers.se> - -$normal=0; - -push(@INC,"perlasm","../../perlasm"); -require "x86asm.pl"; - -&asm_init($ARGV[0],"sha1-586.pl",$ARGV[$#ARGV] eq "386"); - -$A="eax"; -$B="ecx"; -$C="ebx"; -$D="edx"; -$E="edi"; -$T="esi"; -$tmp1="ebp"; - -$off=9*4; - -@K=(0x5a827999,0x6ed9eba1,0x8f1bbcdc,0xca62c1d6); - -&sha1_block_data("sha1_block_asm_data_order"); - -&asm_finish(); - -sub Nn - { - local($p)=@_; - local(%n)=($A,$T,$B,$A,$C,$B,$D,$C,$E,$D,$T,$E); - return($n{$p}); - } - -sub Np - { - local($p)=@_; - local(%n)=($A,$T,$B,$A,$C,$B,$D,$C,$E,$D,$T,$E); - local(%n)=($A,$B,$B,$C,$C,$D,$D,$E,$E,$T,$T,$A); - return($n{$p}); - } - -sub Na - { - local($n)=@_; - return( (($n )&0x0f), - (($n+ 2)&0x0f), - (($n+ 8)&0x0f), - (($n+13)&0x0f), - (($n+ 1)&0x0f)); - } - -sub X_expand - { - local($in)=@_; - - &comment("First, load the words onto the stack in network byte order"); - for ($i=0; $i<16; $i+=2) - { - &mov($A,&DWP(($i+0)*4,$in,"",0));# unless $i == 0; - &mov($B,&DWP(($i+1)*4,$in,"",0)); - &bswap($A); - &bswap($B); - &mov(&swtmp($i+0),$A); - &mov(&swtmp($i+1),$B); - } - - &comment("We now have the X array on the stack"); - &comment("starting at sp-4"); - } - -# Rules of engagement -# F is always trashable at the start, the running total. -# E becomes the next F so it can be trashed after it has been 'accumulated' -# F becomes A in the next round. We don't need to access it much. -# During the X update part, the result ends up in $X[$n0]. - -sub BODY_00_15 - { - local($pos,$K,$X,$n,$a,$b,$c,$d,$e,$f)=@_; - - &comment("00_15 $n"); - - &mov($f,$c); # f to hold F_00_19(b,c,d) - if ($n==0) { &mov($tmp1,$a); } - else { &mov($a,$tmp1); } - &rotl($tmp1,5); # tmp1=ROTATE(a,5) - &xor($f,$d); - &and($f,$b); - &add($tmp1,$e); # tmp1+=e; - &mov($e,&swtmp($n)); # e becomes volatile and - # is loaded with xi - &xor($f,$d); # f holds F_00_19(b,c,d) - &rotr($b,2); # b=ROTATE(b,30) - &lea($tmp1,&DWP($K,$tmp1,$e,1));# tmp1+=K_00_19+xi - - if ($n==15) { &add($f,$tmp1); } # f+=tmp1 - else { &add($tmp1,$f); } - } - -sub BODY_16_19 - { - local($pos,$K,$X,$n,$a,$b,$c,$d,$e,$f)=@_; - local($n0,$n1,$n2,$n3,$np)=&Na($n); - - &comment("16_19 $n"); - - &mov($f,&swtmp($n1)); # f to hold Xupdate(xi,xa,xb,xc,xd) - &mov($tmp1,$c); # tmp1 to hold F_00_19(b,c,d) - &xor($f,&swtmp($n0)); - &xor($tmp1,$d); - &xor($f,&swtmp($n2)); - &and($tmp1,$b); # tmp1 holds F_00_19(b,c,d) - &rotr($b,2); # b=ROTATE(b,30) - &xor($f,&swtmp($n3)); # f holds xa^xb^xc^xd - &rotl($f,1); # f=ROATE(f,1) - &xor($tmp1,$d); # tmp1=F_00_19(b,c,d) - &mov(&swtmp($n0),$f); # xi=f - &lea($f,&DWP($K,$f,$e,1)); # f+=K_00_19+e - &mov($e,$a); # e becomes volatile - &rotl($e,5); # e=ROTATE(a,5) - &add($f,$tmp1); # f+=F_00_19(b,c,d) - &add($f,$e); # f+=ROTATE(a,5) - } - -sub BODY_20_39 - { - local($pos,$K,$X,$n,$a,$b,$c,$d,$e,$f)=@_; - - &comment("20_39 $n"); - local($n0,$n1,$n2,$n3,$np)=&Na($n); - - &mov($tmp1,$b); # tmp1 to hold F_20_39(b,c,d) - &mov($f,&swtmp($n0)); # f to hold Xupdate(xi,xa,xb,xc,xd) - &rotr($b,2); # b=ROTATE(b,30) - &xor($f,&swtmp($n1)); - &xor($tmp1,$c); - &xor($f,&swtmp($n2)); - &xor($tmp1,$d); # tmp1 holds F_20_39(b,c,d) - &xor($f,&swtmp($n3)); # f holds xa^xb^xc^xd - &rotl($f,1); # f=ROTATE(f,1) - &add($tmp1,$e); - &mov(&swtmp($n0),$f); # xi=f - &mov($e,$a); # e becomes volatile - &rotl($e,5); # e=ROTATE(a,5) - &lea($f,&DWP($K,$f,$tmp1,1)); # f+=K_20_39+e - &add($f,$e); # f+=ROTATE(a,5) - } - -sub BODY_40_59 - { - local($pos,$K,$X,$n,$a,$b,$c,$d,$e,$f)=@_; - - &comment("40_59 $n"); - local($n0,$n1,$n2,$n3,$np)=&Na($n); - - &mov($f,&swtmp($n0)); # f to hold Xupdate(xi,xa,xb,xc,xd) - &mov($tmp1,&swtmp($n1)); - &xor($f,$tmp1); - &mov($tmp1,&swtmp($n2)); - &xor($f,$tmp1); - &mov($tmp1,&swtmp($n3)); - &xor($f,$tmp1); # f holds xa^xb^xc^xd - &mov($tmp1,$b); # tmp1 to hold F_40_59(b,c,d) - &rotl($f,1); # f=ROTATE(f,1) - &or($tmp1,$c); - &mov(&swtmp($n0),$f); # xi=f - &and($tmp1,$d); - &lea($f,&DWP($K,$f,$e,1)); # f+=K_40_59+e - &mov($e,$b); # e becomes volatile and is used - # to calculate F_40_59(b,c,d) - &rotr($b,2); # b=ROTATE(b,30) - &and($e,$c); - &or($tmp1,$e); # tmp1 holds F_40_59(b,c,d) - &mov($e,$a); - &rotl($e,5); # e=ROTATE(a,5) - &add($f,$tmp1); # f+=tmp1; - &add($f,$e); # f+=ROTATE(a,5) - } - -sub BODY_60_79 - { - &BODY_20_39(@_); - } - -sub sha1_block_host - { - local($name, $sclabel)=@_; - - &function_begin_B($name,""); - - # parameter 1 is the MD5_CTX structure. - # A 0 - # B 4 - # C 8 - # D 12 - # E 16 - - &mov("ecx", &wparam(2)); - &push("esi"); - &shl("ecx",6); - &mov("esi", &wparam(1)); - &push("ebp"); - &add("ecx","esi"); # offset to leave on - &push("ebx"); - &mov("ebp", &wparam(0)); - &push("edi"); - &mov($D, &DWP(12,"ebp","",0)); - &stack_push(18+9); - &mov($E, &DWP(16,"ebp","",0)); - &mov($C, &DWP( 8,"ebp","",0)); - &mov(&swtmp(17),"ecx"); - - &comment("First we need to setup the X array"); - - for ($i=0; $i<16; $i+=2) - { - &mov($A,&DWP(($i+0)*4,"esi","",0));# unless $i == 0; - &mov($B,&DWP(($i+1)*4,"esi","",0)); - &mov(&swtmp($i+0),$A); - &mov(&swtmp($i+1),$B); - } - &jmp($sclabel); - &function_end_B($name); - } - - -sub sha1_block_data - { - local($name)=@_; - - &function_begin_B($name,""); - - # parameter 1 is the MD5_CTX structure. - # A 0 - # B 4 - # C 8 - # D 12 - # E 16 - - &mov("ecx", &wparam(2)); - &push("esi"); - &shl("ecx",6); - &mov("esi", &wparam(1)); - &push("ebp"); - &add("ecx","esi"); # offset to leave on - &push("ebx"); - &mov("ebp", &wparam(0)); - &push("edi"); - &mov($D, &DWP(12,"ebp","",0)); - &stack_push(18+9); - &mov($E, &DWP(16,"ebp","",0)); - &mov($C, &DWP( 8,"ebp","",0)); - &mov(&swtmp(17),"ecx"); - - &comment("First we need to setup the X array"); - - &set_label("start") unless $normal; - - &X_expand("esi"); - &mov(&wparam(1),"esi"); - - &set_label("shortcut", 0, 1); - &comment(""); - &comment("Start processing"); - - # odd start - &mov($A, &DWP( 0,"ebp","",0)); - &mov($B, &DWP( 4,"ebp","",0)); - $X="esp"; - &BODY_00_15(-2,$K[0],$X, 0,$A,$B,$C,$D,$E,$T); - &BODY_00_15( 0,$K[0],$X, 1,$T,$A,$B,$C,$D,$E); - &BODY_00_15( 0,$K[0],$X, 2,$E,$T,$A,$B,$C,$D); - &BODY_00_15( 0,$K[0],$X, 3,$D,$E,$T,$A,$B,$C); - &BODY_00_15( 0,$K[0],$X, 4,$C,$D,$E,$T,$A,$B); - &BODY_00_15( 0,$K[0],$X, 5,$B,$C,$D,$E,$T,$A); - &BODY_00_15( 0,$K[0],$X, 6,$A,$B,$C,$D,$E,$T); - &BODY_00_15( 0,$K[0],$X, 7,$T,$A,$B,$C,$D,$E); - &BODY_00_15( 0,$K[0],$X, 8,$E,$T,$A,$B,$C,$D); - &BODY_00_15( 0,$K[0],$X, 9,$D,$E,$T,$A,$B,$C); - &BODY_00_15( 0,$K[0],$X,10,$C,$D,$E,$T,$A,$B); - &BODY_00_15( 0,$K[0],$X,11,$B,$C,$D,$E,$T,$A); - &BODY_00_15( 0,$K[0],$X,12,$A,$B,$C,$D,$E,$T); - &BODY_00_15( 0,$K[0],$X,13,$T,$A,$B,$C,$D,$E); - &BODY_00_15( 0,$K[0],$X,14,$E,$T,$A,$B,$C,$D); - &BODY_00_15( 1,$K[0],$X,15,$D,$E,$T,$A,$B,$C); - &BODY_16_19(-1,$K[0],$X,16,$C,$D,$E,$T,$A,$B); - &BODY_16_19( 0,$K[0],$X,17,$B,$C,$D,$E,$T,$A); - &BODY_16_19( 0,$K[0],$X,18,$A,$B,$C,$D,$E,$T); - &BODY_16_19( 1,$K[0],$X,19,$T,$A,$B,$C,$D,$E); - - &BODY_20_39(-1,$K[1],$X,20,$E,$T,$A,$B,$C,$D); - &BODY_20_39( 0,$K[1],$X,21,$D,$E,$T,$A,$B,$C); - &BODY_20_39( 0,$K[1],$X,22,$C,$D,$E,$T,$A,$B); - &BODY_20_39( 0,$K[1],$X,23,$B,$C,$D,$E,$T,$A); - &BODY_20_39( 0,$K[1],$X,24,$A,$B,$C,$D,$E,$T); - &BODY_20_39( 0,$K[1],$X,25,$T,$A,$B,$C,$D,$E); - &BODY_20_39( 0,$K[1],$X,26,$E,$T,$A,$B,$C,$D); - &BODY_20_39( 0,$K[1],$X,27,$D,$E,$T,$A,$B,$C); - &BODY_20_39( 0,$K[1],$X,28,$C,$D,$E,$T,$A,$B); - &BODY_20_39( 0,$K[1],$X,29,$B,$C,$D,$E,$T,$A); - &BODY_20_39( 0,$K[1],$X,30,$A,$B,$C,$D,$E,$T); - &BODY_20_39( 0,$K[1],$X,31,$T,$A,$B,$C,$D,$E); - &BODY_20_39( 0,$K[1],$X,32,$E,$T,$A,$B,$C,$D); - &BODY_20_39( 0,$K[1],$X,33,$D,$E,$T,$A,$B,$C); - &BODY_20_39( 0,$K[1],$X,34,$C,$D,$E,$T,$A,$B); - &BODY_20_39( 0,$K[1],$X,35,$B,$C,$D,$E,$T,$A); - &BODY_20_39( 0,$K[1],$X,36,$A,$B,$C,$D,$E,$T); - &BODY_20_39( 0,$K[1],$X,37,$T,$A,$B,$C,$D,$E); - &BODY_20_39( 0,$K[1],$X,38,$E,$T,$A,$B,$C,$D); - &BODY_20_39( 1,$K[1],$X,39,$D,$E,$T,$A,$B,$C); - - &BODY_40_59(-1,$K[2],$X,40,$C,$D,$E,$T,$A,$B); - &BODY_40_59( 0,$K[2],$X,41,$B,$C,$D,$E,$T,$A); - &BODY_40_59( 0,$K[2],$X,42,$A,$B,$C,$D,$E,$T); - &BODY_40_59( 0,$K[2],$X,43,$T,$A,$B,$C,$D,$E); - &BODY_40_59( 0,$K[2],$X,44,$E,$T,$A,$B,$C,$D); - &BODY_40_59( 0,$K[2],$X,45,$D,$E,$T,$A,$B,$C); - &BODY_40_59( 0,$K[2],$X,46,$C,$D,$E,$T,$A,$B); - &BODY_40_59( 0,$K[2],$X,47,$B,$C,$D,$E,$T,$A); - &BODY_40_59( 0,$K[2],$X,48,$A,$B,$C,$D,$E,$T); - &BODY_40_59( 0,$K[2],$X,49,$T,$A,$B,$C,$D,$E); - &BODY_40_59( 0,$K[2],$X,50,$E,$T,$A,$B,$C,$D); - &BODY_40_59( 0,$K[2],$X,51,$D,$E,$T,$A,$B,$C); - &BODY_40_59( 0,$K[2],$X,52,$C,$D,$E,$T,$A,$B); - &BODY_40_59( 0,$K[2],$X,53,$B,$C,$D,$E,$T,$A); - &BODY_40_59( 0,$K[2],$X,54,$A,$B,$C,$D,$E,$T); - &BODY_40_59( 0,$K[2],$X,55,$T,$A,$B,$C,$D,$E); - &BODY_40_59( 0,$K[2],$X,56,$E,$T,$A,$B,$C,$D); - &BODY_40_59( 0,$K[2],$X,57,$D,$E,$T,$A,$B,$C); - &BODY_40_59( 0,$K[2],$X,58,$C,$D,$E,$T,$A,$B); - &BODY_40_59( 1,$K[2],$X,59,$B,$C,$D,$E,$T,$A); - - &BODY_60_79(-1,$K[3],$X,60,$A,$B,$C,$D,$E,$T); - &BODY_60_79( 0,$K[3],$X,61,$T,$A,$B,$C,$D,$E); - &BODY_60_79( 0,$K[3],$X,62,$E,$T,$A,$B,$C,$D); - &BODY_60_79( 0,$K[3],$X,63,$D,$E,$T,$A,$B,$C); - &BODY_60_79( 0,$K[3],$X,64,$C,$D,$E,$T,$A,$B); - &BODY_60_79( 0,$K[3],$X,65,$B,$C,$D,$E,$T,$A); - &BODY_60_79( 0,$K[3],$X,66,$A,$B,$C,$D,$E,$T); - &BODY_60_79( 0,$K[3],$X,67,$T,$A,$B,$C,$D,$E); - &BODY_60_79( 0,$K[3],$X,68,$E,$T,$A,$B,$C,$D); - &BODY_60_79( 0,$K[3],$X,69,$D,$E,$T,$A,$B,$C); - &BODY_60_79( 0,$K[3],$X,70,$C,$D,$E,$T,$A,$B); - &BODY_60_79( 0,$K[3],$X,71,$B,$C,$D,$E,$T,$A); - &BODY_60_79( 0,$K[3],$X,72,$A,$B,$C,$D,$E,$T); - &BODY_60_79( 0,$K[3],$X,73,$T,$A,$B,$C,$D,$E); - &BODY_60_79( 0,$K[3],$X,74,$E,$T,$A,$B,$C,$D); - &BODY_60_79( 0,$K[3],$X,75,$D,$E,$T,$A,$B,$C); - &BODY_60_79( 0,$K[3],$X,76,$C,$D,$E,$T,$A,$B); - &BODY_60_79( 0,$K[3],$X,77,$B,$C,$D,$E,$T,$A); - &BODY_60_79( 0,$K[3],$X,78,$A,$B,$C,$D,$E,$T); - &BODY_60_79( 2,$K[3],$X,79,$T,$A,$B,$C,$D,$E); - - &comment("End processing"); - &comment(""); - # D is the tmp value - - # E -> A - # T -> B - # A -> C - # B -> D - # C -> E - # D -> T - - &mov($tmp1,&wparam(0)); - - &mov($D, &DWP(12,$tmp1,"",0)); - &add($D,$B); - &mov($B, &DWP( 4,$tmp1,"",0)); - &add($B,$T); - &mov($T, $A); - &mov($A, &DWP( 0,$tmp1,"",0)); - &mov(&DWP(12,$tmp1,"",0),$D); - - &add($A,$E); - &mov($E, &DWP(16,$tmp1,"",0)); - &add($E,$C); - &mov($C, &DWP( 8,$tmp1,"",0)); - &add($C,$T); - - &mov(&DWP( 0,$tmp1,"",0),$A); - &mov("esi",&wparam(1)); - &mov(&DWP( 8,$tmp1,"",0),$C); - &add("esi",64); - &mov("eax",&swtmp(17)); - &mov(&DWP(16,$tmp1,"",0),$E); - &cmp("esi","eax"); - &mov(&DWP( 4,$tmp1,"",0),$B); - &jb(&label("start")); - - &stack_pop(18+9); - &pop("edi"); - &pop("ebx"); - &pop("ebp"); - &pop("esi"); - &ret(); - - # keep a note of shortcut label so it can be used outside - # block. - my $sclabel = &label("shortcut"); - - &function_end_B($name); - # Putting this here avoids problems with MASM in debugging mode - &sha1_block_host("sha1_block_asm_host_order", $sclabel); - } - |