968 files changed, 0 insertions, 271131 deletions

diff --git a/crypto/openssl/crypto/LPdir_nyi.c b/crypto/openssl/crypto/LPdir_nyi.c
deleted file mode 100644
index 6c1a50e6a8e2..000000000000
--- a/crypto/openssl/crypto/LPdir_nyi.c
+++ /dev/null
@@ -1,42 +0,0 @@
-/* $LP: LPlib/source/LPdir_win.c,v 1.1 2004/06/14 10:07:56 _cvs_levitte Exp $ */
-/*
- * Copyright (c) 2004, Richard Levitte <richard@levitte.org>
- * All rights reserved.
- *
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions
- * are met:
- * 1. Redistributions of source code must retain the above copyright
- *    notice, this list of conditions and the following disclaimer.
- * 2. Redistributions in binary form must reproduce the above copyright
- *    notice, this list of conditions and the following disclaimer in the
- *    documentation and/or other materials provided with the distribution.
- *
- * THIS SOFTWARE IS PROVIDED BY THE REGENTS AND CONTRIBUTORS ``AS IS'' AND
- * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
- * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
- * ARE DISCLAIMED.  IN NO EVENT SHALL THE REGENTS OR CONTRIBUTORS BE LIABLE
- * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
- * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
- * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
- * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
- * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
- * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
- * SUCH DAMAGE.
- */
-
-#ifndef LPDIR_H
-#include "LPdir.h"
-#endif
-
-struct LP_dir_context_st { void *dummy; };
-const char *LP_find_file(LP_DIR_CTX **ctx, const char *directory)
-	{
-	errno = EINVAL;
-	return 0;
-	}
-int LP_find_file_end(LP_DIR_CTX **ctx)
-	{
-	errno = EINVAL;
-	return 0;
-	}
diff --git a/crypto/openssl/crypto/LPdir_unix.c b/crypto/openssl/crypto/LPdir_unix.c
deleted file mode 100644
index b004cd99e8ab..000000000000
--- a/crypto/openssl/crypto/LPdir_unix.c
+++ /dev/null
@@ -1,127 +0,0 @@
-/* $LP: LPlib/source/LPdir_unix.c,v 1.11 2004/09/23 22:07:22 _cvs_levitte Exp $ */
-/*
- * Copyright (c) 2004, Richard Levitte <richard@levitte.org>
- * All rights reserved.
- *
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions
- * are met:
- * 1. Redistributions of source code must retain the above copyright
- *    notice, this list of conditions and the following disclaimer.
- * 2. Redistributions in binary form must reproduce the above copyright
- *    notice, this list of conditions and the following disclaimer in the
- *    documentation and/or other materials provided with the distribution.
- * 
- * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
- * ``AS IS'' AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
- * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
- * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
- * OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
- * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
- * LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
- * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
- * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
- * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
- * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
- */
-
-#include <stddef.h>
-#include <stdlib.h>
-#include <limits.h>
-#include <string.h>
-#include <sys/types.h>
-#include <dirent.h>
-#include <errno.h>
-#ifndef LPDIR_H
-#include "LPdir.h"
-#endif
-
-/* The POSIXly macro for the maximum number of characters in a file path
-   is NAME_MAX.  However, some operating systems use PATH_MAX instead.
-   Therefore, it seems natural to first check for PATH_MAX and use that,
-   and if it doesn't exist, use NAME_MAX. */
-#if defined(PATH_MAX)
-# define LP_ENTRY_SIZE PATH_MAX
-#elif defined(NAME_MAX)
-# define LP_ENTRY_SIZE NAME_MAX
-#endif
-
-/* Of course, there's the possibility that neither PATH_MAX nor NAME_MAX
-   exist.  It's also possible that NAME_MAX exists but is define to a
-   very small value (HP-UX offers 14), so we need to check if we got a
-   result, and if it meets a minimum standard, and create or change it
-   if not. */
-#if !defined(LP_ENTRY_SIZE) || LP_ENTRY_SIZE<255
-# undef LP_ENTRY_SIZE
-# define LP_ENTRY_SIZE 255
-#endif
-
-struct LP_dir_context_st
-{
-  DIR *dir;
-  char entry_name[LP_ENTRY_SIZE+1];
-};
-
-const char *LP_find_file(LP_DIR_CTX **ctx, const char *directory)
-{
-  struct dirent *direntry = NULL;
-
-  if (ctx == NULL || directory == NULL)
-    {
-      errno = EINVAL;
-      return 0;
-    }
-
-  errno = 0;
-  if (*ctx == NULL)
-    {
-      *ctx = (LP_DIR_CTX *)malloc(sizeof(LP_DIR_CTX));
-      if (*ctx == NULL)
-	{
-	  errno = ENOMEM;
-	  return 0;
-	}
-      memset(*ctx, '\0', sizeof(LP_DIR_CTX));
-
-      (*ctx)->dir = opendir(directory);
-      if ((*ctx)->dir == NULL)
-	{
-	  int save_errno = errno; /* Probably not needed, but I'm paranoid */
-	  free(*ctx);
-	  *ctx = NULL;
-	  errno = save_errno;
-	  return 0;
-	}
-    }
-
-  direntry = readdir((*ctx)->dir);
-  if (direntry == NULL)
-    {
-      return 0;
-    }
-
-  strncpy((*ctx)->entry_name, direntry->d_name, sizeof((*ctx)->entry_name) - 1);
-  (*ctx)->entry_name[sizeof((*ctx)->entry_name) - 1] = '\0';
-  return (*ctx)->entry_name;
-}
-
-int LP_find_file_end(LP_DIR_CTX **ctx)
-{
-  if (ctx != NULL && *ctx != NULL)
-    {
-      int ret = closedir((*ctx)->dir);
-
-      free(*ctx);
-      switch (ret)
-	{
-	case 0:
-	  return 1;
-	case -1:
-	  return 0;
-	default:
-	  break;
-	}
-    }
-  errno = EINVAL;
-  return 0;
-}
diff --git a/crypto/openssl/crypto/LPdir_vms.c b/crypto/openssl/crypto/LPdir_vms.c
deleted file mode 100644
index 85b427a623b6..000000000000
--- a/crypto/openssl/crypto/LPdir_vms.c
+++ /dev/null
@@ -1,199 +0,0 @@
-/* $LP: LPlib/source/LPdir_vms.c,v 1.20 2004/08/26 13:36:05 _cvs_levitte Exp $ */
-/*
- * Copyright (c) 2004, Richard Levitte <richard@levitte.org>
- * All rights reserved.
- *
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions
- * are met:
- * 1. Redistributions of source code must retain the above copyright
- *    notice, this list of conditions and the following disclaimer.
- * 2. Redistributions in binary form must reproduce the above copyright
- *    notice, this list of conditions and the following disclaimer in the
- *    documentation and/or other materials provided with the distribution.
- * 
- * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
- * ``AS IS'' AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
- * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
- * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
- * OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
- * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
- * LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
- * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
- * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
- * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
- * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
- */
-
-#include <stddef.h>
-#include <stdlib.h>
-#include <string.h>
-#include <errno.h>
-#include <descrip.h>
-#include <namdef.h>
-#include <rmsdef.h>
-#include <libfildef.h>
-#include <lib$routines.h>
-#include <strdef.h>
-#include <str$routines.h>
-#include <stsdef.h>
-#ifndef LPDIR_H
-#include "LPdir.h"
-#endif
-
-/* Because some compiler options hide this macor */
-#ifndef EVMSERR
-#define EVMSERR		65535  /* error for non-translatable VMS errors */
-#endif
-
-struct LP_dir_context_st
-{
-  unsigned long VMS_context;
-#ifdef NAML$C_MAXRSS
-  char filespec[NAML$C_MAXRSS+1];
-  char result[NAML$C_MAXRSS+1];
-#else
-  char filespec[256];
-  char result[256];
-#endif
-  struct dsc$descriptor_d filespec_dsc;
-  struct dsc$descriptor_d result_dsc;
-};
-
-const char *LP_find_file(LP_DIR_CTX **ctx, const char *directory)
-{
-  int status;
-  char *p, *r;
-  size_t l;
-  unsigned long flags = 0;
-#ifdef NAML$C_MAXRSS
-  flags |= LIB$M_FIL_LONG_NAMES;
-#endif
-
-  if (ctx == NULL || directory == NULL)
-    {
-      errno = EINVAL;
-      return 0;
-    }
-
-  errno = 0;
-  if (*ctx == NULL)
-    {
-      size_t filespeclen = strlen(directory);
-      char *filespec = NULL;
-
-      /* MUST be a VMS directory specification!  Let's estimate if it is. */
-      if (directory[filespeclen-1] != ']'
-	  && directory[filespeclen-1] != '>'
-	  && directory[filespeclen-1] != ':')
-	{
-	  errno = EINVAL;
-	  return 0;
-	}
-
-      filespeclen += 4;		/* "*.*;" */
-
-      if (filespeclen >
-#ifdef NAML$C_MAXRSS
-	  NAML$C_MAXRSS
-#else
-	  255
-#endif
-	  )
-	{
-	  errno = ENAMETOOLONG;
-	  return 0;
-	}
-
-      *ctx = (LP_DIR_CTX *)malloc(sizeof(LP_DIR_CTX));
-      if (*ctx == NULL)
-	{
-	  errno = ENOMEM;
-	  return 0;
-	}
-      memset(*ctx, '\0', sizeof(LP_DIR_CTX));
-
-      strcpy((*ctx)->filespec,directory);
-      strcat((*ctx)->filespec,"*.*;");
-      (*ctx)->filespec_dsc.dsc$w_length = filespeclen;
-      (*ctx)->filespec_dsc.dsc$b_dtype = DSC$K_DTYPE_T;
-      (*ctx)->filespec_dsc.dsc$b_class = DSC$K_CLASS_S;
-      (*ctx)->filespec_dsc.dsc$a_pointer = (*ctx)->filespec;
-      (*ctx)->result_dsc.dsc$w_length = 0;
-      (*ctx)->result_dsc.dsc$b_dtype = DSC$K_DTYPE_T;
-      (*ctx)->result_dsc.dsc$b_class = DSC$K_CLASS_D;
-      (*ctx)->result_dsc.dsc$a_pointer = 0;
-    }
-
-  (*ctx)->result_dsc.dsc$w_length = 0;
-  (*ctx)->result_dsc.dsc$b_dtype = DSC$K_DTYPE_T;
-  (*ctx)->result_dsc.dsc$b_class = DSC$K_CLASS_D;
-  (*ctx)->result_dsc.dsc$a_pointer = 0;
-
-  status = lib$find_file(&(*ctx)->filespec_dsc, &(*ctx)->result_dsc,
-			 &(*ctx)->VMS_context, 0, 0, 0, &flags);
-
-  if (status == RMS$_NMF)
-    {
-      errno = 0;
-      vaxc$errno = status;
-      return NULL;
-    }
-
-  if(!$VMS_STATUS_SUCCESS(status))
-    {
-      errno = EVMSERR;
-      vaxc$errno = status;
-      return NULL;
-    }
-
-  /* Quick, cheap and dirty way to discard any device and directory,
-     since we only want file names */
-  l = (*ctx)->result_dsc.dsc$w_length;
-  p = (*ctx)->result_dsc.dsc$a_pointer;
-  r = p;
-  for (; *p; p++)
-    {
-      if (*p == '^' && p[1] != '\0') /* Take care of ODS-5 escapes */
-	{
-	  p++;
-	}
-      else if (*p == ':' || *p == '>' || *p == ']')
-	{
-	  l -= p + 1 - r;
-	  r = p + 1;
-	}
-      else if (*p == ';')
-	{
-	  l = p - r;
-	  break;
-	}
-    }
-
-  strncpy((*ctx)->result, r, l);
-  (*ctx)->result[l] = '\0';
-  str$free1_dx(&(*ctx)->result_dsc);
-
-  return (*ctx)->result;
-}
-
-int LP_find_file_end(LP_DIR_CTX **ctx)
-{
-  if (ctx != NULL && *ctx != NULL)
-    {
-      int status = lib$find_file_end(&(*ctx)->VMS_context);
-
-      free(*ctx);
-
-      if(!$VMS_STATUS_SUCCESS(status))
-	{
-	  errno = EVMSERR;
-	  vaxc$errno = status;
-	  return 0;
-	}
-      return 1;
-    }
-  errno = EINVAL;
-  return 0;
-}
-
diff --git a/crypto/openssl/crypto/LPdir_win.c b/crypto/openssl/crypto/LPdir_win.c
deleted file mode 100644
index 09b475beed17..000000000000
--- a/crypto/openssl/crypto/LPdir_win.c
+++ /dev/null
@@ -1,155 +0,0 @@
-/* $LP: LPlib/source/LPdir_win.c,v 1.10 2004/08/26 13:36:05 _cvs_levitte Exp $ */
-/*
- * Copyright (c) 2004, Richard Levitte <richard@levitte.org>
- * All rights reserved.
- *
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions
- * are met:
- * 1. Redistributions of source code must retain the above copyright
- *    notice, this list of conditions and the following disclaimer.
- * 2. Redistributions in binary form must reproduce the above copyright
- *    notice, this list of conditions and the following disclaimer in the
- *    documentation and/or other materials provided with the distribution.
- * 
- * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
- * ``AS IS'' AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
- * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
- * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
- * OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
- * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
- * LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
- * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
- * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
- * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
- * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
- */
-#include <windows.h>
-#include <tchar.h>
-#ifndef LPDIR_H
-#include "LPdir.h"
-#endif
-
-/* We're most likely overcautious here, but let's reserve for
-    broken WinCE headers and explicitly opt for UNICODE call.
-    Keep in mind that our WinCE builds are compiled with -DUNICODE
-    [as well as -D_UNICODE]. */
-#if defined(LP_SYS_WINCE) && !defined(FindFirstFile)
-# define FindFirstFile FindFirstFileW
-#endif
-#if defined(LP_SYS_WINCE) && !defined(FindFirstFile)
-# define FindNextFile FindNextFileW
-#endif
-
-#ifndef NAME_MAX
-#define NAME_MAX 255
-#endif
-
-struct LP_dir_context_st
-{
-  WIN32_FIND_DATA ctx;
-  HANDLE handle;
-  char entry_name[NAME_MAX+1];
-};
-
-const char *LP_find_file(LP_DIR_CTX **ctx, const char *directory)
-{
-  struct dirent *direntry = NULL;
-
-  if (ctx == NULL || directory == NULL)
-    {
-      errno = EINVAL;
-      return 0;
-    }
-
-  errno = 0;
-  if (*ctx == NULL)
-    {
-      *ctx = (LP_DIR_CTX *)malloc(sizeof(LP_DIR_CTX));
-      if (*ctx == NULL)
-	{
-	  errno = ENOMEM;
-	  return 0;
-	}
-      memset(*ctx, '\0', sizeof(LP_DIR_CTX));
-
-      if (sizeof(TCHAR) != sizeof(char))
-	{
-	  TCHAR *wdir = NULL;
-	  /* len_0 denotes string length *with* trailing 0 */ 
-	  size_t index = 0,len_0 = strlen(directory) + 1;
-
-	  wdir = (TCHAR *)malloc(len_0 * sizeof(TCHAR));
-	  if (wdir == NULL)
-	    {
-	      free(*ctx);
-	      *ctx = NULL;
-	      errno = ENOMEM;
-	      return 0;
-	    }
-
-#ifdef LP_MULTIBYTE_AVAILABLE
-	  if (!MultiByteToWideChar(CP_ACP, 0, directory, len_0, (WCHAR *)wdir, len_0))
-#endif
-	    for (index = 0; index < len_0; index++)
-	      wdir[index] = (TCHAR)directory[index];
-
-	  (*ctx)->handle = FindFirstFile(wdir, &(*ctx)->ctx);
-
-	  free(wdir);
-	}
-      else
-	(*ctx)->handle = FindFirstFile((TCHAR *)directory, &(*ctx)->ctx);
-
-      if ((*ctx)->handle == INVALID_HANDLE_VALUE)
-	{
-	  free(*ctx);
-	  *ctx = NULL;
-	  errno = EINVAL;
-	  return 0;
-	}
-    }
-  else
-    {
-      if (FindNextFile((*ctx)->handle, &(*ctx)->ctx) == FALSE)
-	{
-	  return 0;
-	}
-    }
-
-  if (sizeof(TCHAR) != sizeof(char))
-    {
-      TCHAR *wdir = (*ctx)->ctx.cFileName;
-      size_t index, len_0 = 0;
-
-      while (wdir[len_0] && len_0 < (sizeof((*ctx)->entry_name) - 1)) len_0++;
-      len_0++;
-
-#ifdef LP_MULTIBYTE_AVAILABLE
-      if (!WideCharToMultiByte(CP_ACP, 0, (WCHAR *)wdir, len_0, (*ctx)->entry_name,
-			       sizeof((*ctx)->entry_name), NULL, 0))
-#endif
-	for (index = 0; index < len_0; index++)
-	  (*ctx)->entry_name[index] = (char)wdir[index];
-    }
-  else
-    strncpy((*ctx)->entry_name, (const char *)(*ctx)->ctx.cFileName,
-	    sizeof((*ctx)->entry_name)-1);
-
-  (*ctx)->entry_name[sizeof((*ctx)->entry_name)-1] = '\0';
-
-  return (*ctx)->entry_name;
-}
-
-int LP_find_file_end(LP_DIR_CTX **ctx)
-{
-  if (ctx != NULL && *ctx != NULL)
-    {
-      FindClose((*ctx)->handle);
-      free(*ctx);
-      *ctx = NULL;
-      return 1;
-    }
-  errno = EINVAL;
-  return 0;
-}
diff --git a/crypto/openssl/crypto/LPdir_win32.c b/crypto/openssl/crypto/LPdir_win32.c
deleted file mode 100644
index e39872da5259..000000000000
--- a/crypto/openssl/crypto/LPdir_win32.c
+++ /dev/null
@@ -1,30 +0,0 @@
-/* $LP: LPlib/source/LPdir_win32.c,v 1.3 2004/08/26 13:36:05 _cvs_levitte Exp $ */
-/*
- * Copyright (c) 2004, Richard Levitte <richard@levitte.org>
- * All rights reserved.
- *
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions
- * are met:
- * 1. Redistributions of source code must retain the above copyright
- *    notice, this list of conditions and the following disclaimer.
- * 2. Redistributions in binary form must reproduce the above copyright
- *    notice, this list of conditions and the following disclaimer in the
- *    documentation and/or other materials provided with the distribution.
- * 
- * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
- * ``AS IS'' AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
- * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
- * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
- * OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
- * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
- * LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
- * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
- * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
- * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
- * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
- */
-
-#define LP_SYS_WIN32
-#define LP_MULTIBYTE_AVAILABLE
-#include "LPdir_win.c"
diff --git a/crypto/openssl/crypto/LPdir_wince.c b/crypto/openssl/crypto/LPdir_wince.c
deleted file mode 100644
index ab0e1e6f4f8d..000000000000
--- a/crypto/openssl/crypto/LPdir_wince.c
+++ /dev/null
@@ -1,31 +0,0 @@
-/* $LP: LPlib/source/LPdir_wince.c,v 1.3 2004/08/26 13:36:05 _cvs_levitte Exp $ */
-/*
- * Copyright (c) 2004, Richard Levitte <richard@levitte.org>
- * All rights reserved.
- *
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions
- * are met:
- * 1. Redistributions of source code must retain the above copyright
- *    notice, this list of conditions and the following disclaimer.
- * 2. Redistributions in binary form must reproduce the above copyright
- *    notice, this list of conditions and the following disclaimer in the
- *    documentation and/or other materials provided with the distribution.
- * 
- * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
- * ``AS IS'' AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
- * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
- * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
- * OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
- * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
- * LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
- * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
- * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
- * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
- * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
- */
-
-#define LP_SYS_WINCE
-/* We might want to define LP_MULTIBYTE_AVAILABLE here.  It's currently
-   under investigation what the exact conditions would be */
-#include "LPdir_win.c"
diff --git a/crypto/openssl/crypto/Makefile b/crypto/openssl/crypto/Makefile
deleted file mode 100644
index bb8eaa036c55..000000000000
--- a/crypto/openssl/crypto/Makefile
+++ /dev/null
@@ -1,204 +0,0 @@
-#
-# OpenSSL/crypto/Makefile
-#
-
-DIR=		crypto
-TOP=		..
-CC=		cc
-INCLUDE=	-I. -I$(TOP) -I../include
-# INCLUDES targets sudbirs!
-INCLUDES=	-I.. -I../.. -I../../include
-CFLAG=		-g
-MAKEDEPPROG=	makedepend
-MAKEDEPEND=	$(TOP)/util/domd $(TOP) -MD $(MAKEDEPPROG)
-MAKEFILE=       Makefile
-RM=             rm -f
-AR=		ar r
-
-RECURSIVE_MAKE=	[ -n "$(SDIRS)" ] && for i in $(SDIRS) ; do \
-		    (cd $$i && echo "making $$target in $(DIR)/$$i..." && \
-		    $(MAKE) -e TOP=../.. DIR=$$i INCLUDES='${INCLUDES}' $$target ) || exit 1; \
-		done;
-
-PEX_LIBS=
-EX_LIBS=
- 
-CFLAGS= $(INCLUDE) $(CFLAG)
-ASFLAGS= $(INCLUDE) $(ASFLAG)
-AFLAGS=$(ASFLAGS)
-
-LIBS=
-
-GENERAL=Makefile README crypto-lib.com install.com
-
-LIB= $(TOP)/libcrypto.a
-SHARED_LIB= libcrypto$(SHLIB_EXT)
-LIBSRC=	cryptlib.c mem.c mem_clr.c mem_dbg.c cversion.c ex_data.c tmdiff.c cpt_err.c ebcdic.c uid.c o_time.c o_str.c o_dir.c
-LIBOBJ= cryptlib.o mem.o mem_clr.o mem_dbg.o cversion.o ex_data.o tmdiff.o cpt_err.o ebcdic.o uid.o o_time.o o_str.o o_dir.o $(CPUID_OBJ)
-
-SRC= $(LIBSRC)
-
-EXHEADER= crypto.h tmdiff.h opensslv.h opensslconf.h ebcdic.h symhacks.h \
-	ossl_typ.h
-HEADER=	cryptlib.h buildinf.h md32_common.h o_time.h o_str.h o_dir.h $(EXHEADER)
-
-ALL=    $(GENERAL) $(SRC) $(HEADER)
-
-top:
-	@(cd ..; $(MAKE) DIRS=$(DIR) all)
-
-all: shared
-
-buildinf.h: ../Makefile
-	( echo "#ifndef MK1MF_BUILD"; \
-	echo '  /* auto-generated by crypto/Makefile for crypto/cversion.c */'; \
-	echo '  #define CFLAGS "$(CC) $(CFLAG)"'; \
-	echo '  #define PLATFORM "$(PLATFORM)"'; \
-	echo "  #define DATE \"`LC_ALL=C LC_TIME=C date`\""; \
-	echo '#endif' ) >buildinf.h
-
-x86cpuid-elf.s:	x86cpuid.pl perlasm/x86asm.pl
-	$(PERL) x86cpuid.pl elf $(CFLAGS) $(PROCESSOR) > $@
-x86cpuid-cof.s: x86cpuid.pl perlasm/x86asm.pl
-	$(PERL) x86cpuid.pl coff $(CFLAGS) $(PROCESSOR) > $@
-x86cpuid-out.s: x86cpuid.pl perlasm/x86asm.pl
-	$(PERL) x86cpuid.pl a.out $(CFLAGS) $(PROCESSOR) > $@
-
-uplink.o:	../ms/uplink.c
-	$(CC) $(CFLAGS) -c -o $@ ../ms/uplink.c
-
-uplink-cof.s:	../ms/uplink.pl
-	$(PERL) ../ms/uplink.pl coff > $@
-
-x86_64cpuid.s: x86_64cpuid.pl
-	$(PERL) x86_64cpuid.pl $@
-ia64cpuid.s: ia64cpuid.S
-	$(CC) $(CFLAGS) -E ia64cpuid.S > $@
-
-testapps:
-	[ -z "$(THIS)" ] || (	if echo ${SDIRS} | fgrep ' des '; \
-				then cd des && $(MAKE) -e des; fi )
-	[ -z "$(THIS)" ] || ( cd pkcs7 && $(MAKE) -e testapps );
-	@if [ -z "$(THIS)" ]; then $(MAKE) -f $(TOP)/Makefile reflect THIS=$@; fi
-
-subdirs:
-	@target=all; $(RECURSIVE_MAKE)
-
-files:
-	$(PERL) $(TOP)/util/files.pl Makefile >> $(TOP)/MINFO
-	@target=files; $(RECURSIVE_MAKE)
-
-links:
-	@$(PERL) $(TOP)/util/mklink.pl ../include/openssl $(EXHEADER)
-	@$(PERL) $(TOP)/util/mklink.pl ../test $(TEST)
-	@$(PERL) $(TOP)/util/mklink.pl ../apps $(APPS)
-	@target=links; $(RECURSIVE_MAKE)
-
-# lib: and $(LIB): are splitted to avoid end-less loop
-lib:	$(LIB)
-	@touch lib
-$(LIB):	$(LIBOBJ)
-	$(AR) $(LIB) $(LIBOBJ)
-	$(RANLIB) $(LIB) || echo Never mind.
-
-shared: buildinf.h lib subdirs
-	if [ -n "$(SHARED_LIBS)" ]; then \
-		(cd ..; $(MAKE) $(SHARED_LIB)); \
-	fi
-
-libs:
-	@target=lib; $(RECURSIVE_MAKE)
-
-install:
-	@[ -n "$(INSTALLTOP)" ] # should be set by top Makefile...
-	@headerlist="$(EXHEADER)"; for i in $$headerlist ;\
-	do \
-	(cp $$i $(INSTALL_PREFIX)$(INSTALLTOP)/include/openssl/$$i; \
-	chmod 644 $(INSTALL_PREFIX)$(INSTALLTOP)/include/openssl/$$i ); \
-	done;
-	@target=install; $(RECURSIVE_MAKE)
-
-lint:
-	@target=lint; $(RECURSIVE_MAKE)
-
-depend:
-	@[ -z "$(THIS)" -o -f buildinf.h ] || touch buildinf.h # fake buildinf.h if it does not exist
-	@[ -z "$(THIS)" ] || $(MAKEDEPEND) -- $(CFLAG) $(INCLUDE) $(DEPFLAG) -- $(PROGS) $(LIBSRC)
-	@[ -z "$(THIS)" -o -s buildinf.h ] || rm buildinf.h
-	@[ -z "$(THIS)" ] || (set -e; target=depend; $(RECURSIVE_MAKE) )
-	@if [ -z "$(THIS)" ]; then $(MAKE) -f $(TOP)/Makefile reflect THIS=$@; fi
-
-clean:
-	rm -f buildinf.h *.s *.o */*.o *.obj lib tags core .pure .nfs* *.old *.bak fluff
-	@target=clean; $(RECURSIVE_MAKE)
-
-dclean:
-	$(PERL) -pe 'if (/^# DO NOT DELETE THIS LINE/) {print; exit(0);}' $(MAKEFILE) >Makefile.new
-	mv -f Makefile.new $(MAKEFILE)
-	@target=dclean; $(RECURSIVE_MAKE)
-
-# DO NOT DELETE THIS LINE -- make depend depends on it.
-
-cpt_err.o: ../include/openssl/bio.h ../include/openssl/crypto.h
-cpt_err.o: ../include/openssl/e_os2.h ../include/openssl/err.h
-cpt_err.o: ../include/openssl/lhash.h ../include/openssl/opensslconf.h
-cpt_err.o: ../include/openssl/opensslv.h ../include/openssl/ossl_typ.h
-cpt_err.o: ../include/openssl/safestack.h ../include/openssl/stack.h
-cpt_err.o: ../include/openssl/symhacks.h cpt_err.c
-cryptlib.o: ../e_os.h ../include/openssl/bio.h ../include/openssl/buffer.h
-cryptlib.o: ../include/openssl/crypto.h ../include/openssl/e_os2.h
-cryptlib.o: ../include/openssl/err.h ../include/openssl/lhash.h
-cryptlib.o: ../include/openssl/opensslconf.h ../include/openssl/opensslv.h
-cryptlib.o: ../include/openssl/ossl_typ.h ../include/openssl/safestack.h
-cryptlib.o: ../include/openssl/stack.h ../include/openssl/symhacks.h cryptlib.c
-cryptlib.o: cryptlib.h
-cversion.o: ../e_os.h ../include/openssl/bio.h ../include/openssl/buffer.h
-cversion.o: ../include/openssl/crypto.h ../include/openssl/e_os2.h
-cversion.o: ../include/openssl/err.h ../include/openssl/lhash.h
-cversion.o: ../include/openssl/opensslconf.h ../include/openssl/opensslv.h
-cversion.o: ../include/openssl/ossl_typ.h ../include/openssl/safestack.h
-cversion.o: ../include/openssl/stack.h ../include/openssl/symhacks.h buildinf.h
-cversion.o: cryptlib.h cversion.c
-ebcdic.o: ../include/openssl/e_os2.h ../include/openssl/opensslconf.h ebcdic.c
-ex_data.o: ../e_os.h ../include/openssl/bio.h ../include/openssl/buffer.h
-ex_data.o: ../include/openssl/crypto.h ../include/openssl/e_os2.h
-ex_data.o: ../include/openssl/err.h ../include/openssl/lhash.h
-ex_data.o: ../include/openssl/opensslconf.h ../include/openssl/opensslv.h
-ex_data.o: ../include/openssl/ossl_typ.h ../include/openssl/safestack.h
-ex_data.o: ../include/openssl/stack.h ../include/openssl/symhacks.h cryptlib.h
-ex_data.o: ex_data.c
-mem.o: ../e_os.h ../include/openssl/bio.h ../include/openssl/buffer.h
-mem.o: ../include/openssl/crypto.h ../include/openssl/e_os2.h
-mem.o: ../include/openssl/err.h ../include/openssl/lhash.h
-mem.o: ../include/openssl/opensslconf.h ../include/openssl/opensslv.h
-mem.o: ../include/openssl/ossl_typ.h ../include/openssl/safestack.h
-mem.o: ../include/openssl/stack.h ../include/openssl/symhacks.h cryptlib.h
-mem.o: mem.c
-mem_clr.o: ../include/openssl/crypto.h ../include/openssl/e_os2.h
-mem_clr.o: ../include/openssl/opensslconf.h ../include/openssl/opensslv.h
-mem_clr.o: ../include/openssl/ossl_typ.h ../include/openssl/safestack.h
-mem_clr.o: ../include/openssl/stack.h ../include/openssl/symhacks.h mem_clr.c
-mem_dbg.o: ../e_os.h ../include/openssl/bio.h ../include/openssl/buffer.h
-mem_dbg.o: ../include/openssl/crypto.h ../include/openssl/e_os2.h
-mem_dbg.o: ../include/openssl/err.h ../include/openssl/lhash.h
-mem_dbg.o: ../include/openssl/opensslconf.h ../include/openssl/opensslv.h
-mem_dbg.o: ../include/openssl/ossl_typ.h ../include/openssl/safestack.h
-mem_dbg.o: ../include/openssl/stack.h ../include/openssl/symhacks.h cryptlib.h
-mem_dbg.o: mem_dbg.c
-o_dir.o: ../e_os.h ../include/openssl/e_os2.h ../include/openssl/opensslconf.h
-o_dir.o: LPdir_unix.c o_dir.c o_dir.h
-o_str.o: ../e_os.h ../include/openssl/e_os2.h ../include/openssl/opensslconf.h
-o_str.o: o_str.c o_str.h
-o_time.o: ../include/openssl/e_os2.h ../include/openssl/opensslconf.h o_time.c
-o_time.o: o_time.h
-tmdiff.o: ../e_os.h ../include/openssl/bio.h ../include/openssl/buffer.h
-tmdiff.o: ../include/openssl/crypto.h ../include/openssl/e_os2.h
-tmdiff.o: ../include/openssl/err.h ../include/openssl/lhash.h
-tmdiff.o: ../include/openssl/opensslconf.h ../include/openssl/opensslv.h
-tmdiff.o: ../include/openssl/ossl_typ.h ../include/openssl/safestack.h
-tmdiff.o: ../include/openssl/stack.h ../include/openssl/symhacks.h
-tmdiff.o: ../include/openssl/tmdiff.h cryptlib.h tmdiff.c
-uid.o: ../include/openssl/crypto.h ../include/openssl/e_os2.h
-uid.o: ../include/openssl/opensslconf.h ../include/openssl/opensslv.h
-uid.o: ../include/openssl/ossl_typ.h ../include/openssl/safestack.h
-uid.o: ../include/openssl/stack.h ../include/openssl/symhacks.h uid.c
diff --git a/crypto/openssl/crypto/aes/Makefile b/crypto/openssl/crypto/aes/Makefile
deleted file mode 100644
index 0f939eb7f8ee..000000000000
--- a/crypto/openssl/crypto/aes/Makefile
+++ /dev/null
@@ -1,119 +0,0 @@
-#
-# crypto/aes/Makefile
-#
-
-DIR=	aes
-TOP=	../..
-CC=	cc
-CPP=	$(CC) -E
-INCLUDES=
-CFLAG=-g
-MAKEFILE=	Makefile
-AR=		ar r
-
-AES_ASM_OBJ=aes_core.o aes_cbc.o
-
-CFLAGS= $(INCLUDES) $(CFLAG)
-ASFLAGS= $(INCLUDES) $(ASFLAG)
-AFLAGS= $(ASFLAGS)
-
-GENERAL=Makefile
-#TEST=aestest.c
-TEST=
-APPS=
-
-LIB=$(TOP)/libcrypto.a
-LIBSRC=aes_core.c aes_misc.c aes_ecb.c aes_cbc.c aes_cfb.c aes_ofb.c \
-       aes_ctr.c aes_ige.c
-LIBOBJ=aes_misc.o aes_ecb.o aes_cfb.o aes_ofb.o aes_ctr.o aes_ige.o \
-       $(AES_ASM_OBJ)
-
-SRC= $(LIBSRC)
-
-EXHEADER= aes.h
-HEADER= aes_locl.h $(EXHEADER)
-
-ALL=    $(GENERAL) $(SRC) $(HEADER)
-
-top:
-	(cd ../..; $(MAKE) DIRS=crypto SDIRS=$(DIR) sub_all)
-
-all:	lib
-
-lib:	$(LIBOBJ)
-	$(AR) $(LIB) $(LIBOBJ)
-	$(RANLIB) $(LIB) || echo Never mind.
-	@touch lib
-
-$(LIBOBJ): $(LIBSRC)
-
-aes-ia64.s: asm/aes-ia64.S
-	$(CC) $(CFLAGS) -E asm/aes-ia64.S > $@
-
-ax86-elf.s: asm/aes-586.pl ../perlasm/x86asm.pl
-	(cd asm; $(PERL) aes-586.pl elf $(CFLAGS) $(PROCESSOR) > ../$@)
-ax86-cof.s: asm/aes-586.pl ../perlasm/x86asm.pl
-	(cd asm; $(PERL) aes-586.pl coff $(CFLAGS) $(PROCESSOR) > ../$@)
-ax86-out.s: asm/aes-586.pl ../perlasm/x86asm.pl
-	(cd asm; $(PERL) aes-586.pl a.out $(CFLAGS) $(PROCESSOR) > ../$@)
-
-files:
-	$(PERL) $(TOP)/util/files.pl Makefile >> $(TOP)/MINFO
-
-links:
-	@$(PERL) $(TOP)/util/mklink.pl ../../include/openssl $(EXHEADER)
-	@$(PERL) $(TOP)/util/mklink.pl ../../test $(TEST)
-	@$(PERL) $(TOP)/util/mklink.pl ../../apps $(APPS)
-
-install:
-	@[ -n "$(INSTALLTOP)" ] # should be set by top Makefile...
-	@headerlist="$(EXHEADER)"; for i in $$headerlist ; \
-	do  \
-	(cp $$i $(INSTALL_PREFIX)$(INSTALLTOP)/include/openssl/$$i; \
-	chmod 644 $(INSTALL_PREFIX)$(INSTALLTOP)/include/openssl/$$i ); \
-	done;
-
-tags:
-	ctags $(SRC)
-
-tests:
-
-lint:
-	lint -DLINT $(INCLUDES) $(SRC)>fluff
-
-depend:
-	@[ -n "$(MAKEDEPEND)" ] # should be set by upper Makefile...
-	$(MAKEDEPEND) -- $(CFLAG) $(INCLUDES) $(DEPFLAG) -- $(PROGS) $(LIBSRC)
-
-dclean:
-	$(PERL) -pe 'if (/^# DO NOT DELETE THIS LINE/) {print; exit(0);}' $(MAKEFILE) >Makefile.new
-	mv -f Makefile.new $(MAKEFILE)
-
-clean:
-	rm -f *.s *.o *.obj lib tags core .pure .nfs* *.old *.bak fluff
-
-# DO NOT DELETE THIS LINE -- make depend depends on it.
-
-aes_cbc.o: ../../include/openssl/aes.h ../../include/openssl/e_os2.h
-aes_cbc.o: ../../include/openssl/opensslconf.h aes_cbc.c aes_locl.h
-aes_cfb.o: ../../e_os.h ../../include/openssl/aes.h
-aes_cfb.o: ../../include/openssl/e_os2.h ../../include/openssl/opensslconf.h
-aes_cfb.o: aes_cfb.c aes_locl.h
-aes_core.o: ../../include/openssl/aes.h ../../include/openssl/e_os2.h
-aes_core.o: ../../include/openssl/opensslconf.h aes_core.c aes_locl.h
-aes_ctr.o: ../../include/openssl/aes.h ../../include/openssl/e_os2.h
-aes_ctr.o: ../../include/openssl/opensslconf.h aes_ctr.c aes_locl.h
-aes_ecb.o: ../../include/openssl/aes.h ../../include/openssl/e_os2.h
-aes_ecb.o: ../../include/openssl/opensslconf.h aes_ecb.c aes_locl.h
-aes_ige.o: ../../e_os.h ../../include/openssl/aes.h ../../include/openssl/bio.h
-aes_ige.o: ../../include/openssl/buffer.h ../../include/openssl/crypto.h
-aes_ige.o: ../../include/openssl/e_os2.h ../../include/openssl/err.h
-aes_ige.o: ../../include/openssl/lhash.h ../../include/openssl/opensslconf.h
-aes_ige.o: ../../include/openssl/opensslv.h ../../include/openssl/ossl_typ.h
-aes_ige.o: ../../include/openssl/safestack.h ../../include/openssl/stack.h
-aes_ige.o: ../../include/openssl/symhacks.h ../cryptlib.h aes_ige.c aes_locl.h
-aes_misc.o: ../../include/openssl/aes.h ../../include/openssl/e_os2.h
-aes_misc.o: ../../include/openssl/opensslconf.h
-aes_misc.o: ../../include/openssl/opensslv.h aes_locl.h aes_misc.c
-aes_ofb.o: ../../include/openssl/aes.h ../../include/openssl/e_os2.h
-aes_ofb.o: ../../include/openssl/opensslconf.h aes_locl.h aes_ofb.c
diff --git a/crypto/openssl/crypto/aes/README b/crypto/openssl/crypto/aes/README
deleted file mode 100644
index 0f9620a80eca..000000000000
--- a/crypto/openssl/crypto/aes/README
+++ /dev/null
@@ -1,3 +0,0 @@
-This is an OpenSSL-compatible version of AES (also called Rijndael).
-aes_core.c is basically the same as rijndael-alg-fst.c but with an
-API that looks like the rest of the OpenSSL symmetric cipher suite.
diff --git a/crypto/openssl/crypto/aes/aes.h b/crypto/openssl/crypto/aes/aes.h
deleted file mode 100644
index e6fc44a24d48..000000000000
--- a/crypto/openssl/crypto/aes/aes.h
+++ /dev/null
@@ -1,138 +0,0 @@
-/* crypto/aes/aes.h -*- mode:C; c-file-style: "eay" -*- */
-/* ====================================================================
- * Copyright (c) 1998-2002 The OpenSSL Project.  All rights reserved.
- *
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions
- * are met:
- *
- * 1. Redistributions of source code must retain the above copyright
- *    notice, this list of conditions and the following disclaimer. 
- *
- * 2. Redistributions in binary form must reproduce the above copyright
- *    notice, this list of conditions and the following disclaimer in
- *    the documentation and/or other materials provided with the
- *    distribution.
- *
- * 3. All advertising materials mentioning features or use of this
- *    software must display the following acknowledgment:
- *    "This product includes software developed by the OpenSSL Project
- *    for use in the OpenSSL Toolkit. (http://www.openssl.org/)"
- *
- * 4. The names "OpenSSL Toolkit" and "OpenSSL Project" must not be used to
- *    endorse or promote products derived from this software without
- *    prior written permission. For written permission, please contact
- *    openssl-core@openssl.org.
- *
- * 5. Products derived from this software may not be called "OpenSSL"
- *    nor may "OpenSSL" appear in their names without prior written
- *    permission of the OpenSSL Project.
- *
- * 6. Redistributions of any form whatsoever must retain the following
- *    acknowledgment:
- *    "This product includes software developed by the OpenSSL Project
- *    for use in the OpenSSL Toolkit (http://www.openssl.org/)"
- *
- * THIS SOFTWARE IS PROVIDED BY THE OpenSSL PROJECT ``AS IS'' AND ANY
- * EXPRESSED OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
- * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR
- * PURPOSE ARE DISCLAIMED.  IN NO EVENT SHALL THE OpenSSL PROJECT OR
- * ITS CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
- * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
- * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
- * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
- * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
- * STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
- * ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED
- * OF THE POSSIBILITY OF SUCH DAMAGE.
- * ====================================================================
- *
- */
-
-#ifndef HEADER_AES_H
-#define HEADER_AES_H
-
-#include <openssl/opensslconf.h>
-
-#ifdef OPENSSL_NO_AES
-#error AES is disabled.
-#endif
-
-#define AES_ENCRYPT	1
-#define AES_DECRYPT	0
-
-/* Because array size can't be a const in C, the following two are macros.
-   Both sizes are in bytes. */
-#define AES_MAXNR 14
-#define AES_BLOCK_SIZE 16
-
-#ifdef  __cplusplus
-extern "C" {
-#endif
-
-/* This should be a hidden type, but EVP requires that the size be known */
-struct aes_key_st {
-#ifdef AES_LONG
-    unsigned long rd_key[4 *(AES_MAXNR + 1)];
-#else
-    unsigned int rd_key[4 *(AES_MAXNR + 1)];
-#endif
-    int rounds;
-};
-typedef struct aes_key_st AES_KEY;
-
-const char *AES_options(void);
-
-int AES_set_encrypt_key(const unsigned char *userKey, const int bits,
-	AES_KEY *key);
-int AES_set_decrypt_key(const unsigned char *userKey, const int bits,
-	AES_KEY *key);
-
-void AES_encrypt(const unsigned char *in, unsigned char *out,
-	const AES_KEY *key);
-void AES_decrypt(const unsigned char *in, unsigned char *out,
-	const AES_KEY *key);
-
-void AES_ecb_encrypt(const unsigned char *in, unsigned char *out,
-	const AES_KEY *key, const int enc);
-void AES_cbc_encrypt(const unsigned char *in, unsigned char *out,
-	const unsigned long length, const AES_KEY *key,
-	unsigned char *ivec, const int enc);
-void AES_cfb128_encrypt(const unsigned char *in, unsigned char *out,
-	const unsigned long length, const AES_KEY *key,
-	unsigned char *ivec, int *num, const int enc);
-void AES_cfb1_encrypt(const unsigned char *in, unsigned char *out,
-	const unsigned long length, const AES_KEY *key,
-	unsigned char *ivec, int *num, const int enc);
-void AES_cfb8_encrypt(const unsigned char *in, unsigned char *out,
-	const unsigned long length, const AES_KEY *key,
-	unsigned char *ivec, int *num, const int enc);
-void AES_cfbr_encrypt_block(const unsigned char *in,unsigned char *out,
-			    const int nbits,const AES_KEY *key,
-			    unsigned char *ivec,const int enc);
-void AES_ofb128_encrypt(const unsigned char *in, unsigned char *out,
-	const unsigned long length, const AES_KEY *key,
-	unsigned char *ivec, int *num);
-void AES_ctr128_encrypt(const unsigned char *in, unsigned char *out,
-	const unsigned long length, const AES_KEY *key,
-	unsigned char ivec[AES_BLOCK_SIZE],
-	unsigned char ecount_buf[AES_BLOCK_SIZE],
-	unsigned int *num);
-
-/* For IGE, see also http://www.links.org/files/openssl-ige.pdf */
-/* NB: the IV is _two_ blocks long */
-void AES_ige_encrypt(const unsigned char *in, unsigned char *out,
-		     const unsigned long length, const AES_KEY *key,
-		     unsigned char *ivec, const int enc);
-/* NB: the IV is _four_ blocks long */
-void AES_bi_ige_encrypt(const unsigned char *in, unsigned char *out,
-			const unsigned long length, const AES_KEY *key,
-			const AES_KEY *key2, const unsigned char *ivec,
-			const int enc);
-
-
-#ifdef  __cplusplus
-}
-#endif
-
-#endif /* !HEADER_AES_H */
diff --git a/crypto/openssl/crypto/aes/aes_cbc.c b/crypto/openssl/crypto/aes/aes_cbc.c
deleted file mode 100644
index d2ba6bcdb465..000000000000
--- a/crypto/openssl/crypto/aes/aes_cbc.c
+++ /dev/null
@@ -1,131 +0,0 @@
-/* crypto/aes/aes_cbc.c -*- mode:C; c-file-style: "eay" -*- */
-/* ====================================================================
- * Copyright (c) 1998-2002 The OpenSSL Project.  All rights reserved.
- *
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions
- * are met:
- *
- * 1. Redistributions of source code must retain the above copyright
- *    notice, this list of conditions and the following disclaimer. 
- *
- * 2. Redistributions in binary form must reproduce the above copyright
- *    notice, this list of conditions and the following disclaimer in
- *    the documentation and/or other materials provided with the
- *    distribution.
- *
- * 3. All advertising materials mentioning features or use of this
- *    software must display the following acknowledgment:
- *    "This product includes software developed by the OpenSSL Project
- *    for use in the OpenSSL Toolkit. (http://www.openssl.org/)"
- *
- * 4. The names "OpenSSL Toolkit" and "OpenSSL Project" must not be used to
- *    endorse or promote products derived from this software without
- *    prior written permission. For written permission, please contact
- *    openssl-core@openssl.org.
- *
- * 5. Products derived from this software may not be called "OpenSSL"
- *    nor may "OpenSSL" appear in their names without prior written
- *    permission of the OpenSSL Project.
- *
- * 6. Redistributions of any form whatsoever must retain the following
- *    acknowledgment:
- *    "This product includes software developed by the OpenSSL Project
- *    for use in the OpenSSL Toolkit (http://www.openssl.org/)"
- *
- * THIS SOFTWARE IS PROVIDED BY THE OpenSSL PROJECT ``AS IS'' AND ANY
- * EXPRESSED OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
- * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR
- * PURPOSE ARE DISCLAIMED.  IN NO EVENT SHALL THE OpenSSL PROJECT OR
- * ITS CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
- * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
- * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
- * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
- * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
- * STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
- * ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED
- * OF THE POSSIBILITY OF SUCH DAMAGE.
- * ====================================================================
- *
- */
-
-#ifndef AES_DEBUG
-# ifndef NDEBUG
-#  define NDEBUG
-# endif
-#endif
-#include <assert.h>
-
-#include <openssl/aes.h>
-#include "aes_locl.h"
-
-void AES_cbc_encrypt(const unsigned char *in, unsigned char *out,
-		     const unsigned long length, const AES_KEY *key,
-		     unsigned char *ivec, const int enc) {
-
-	unsigned long n;
-	unsigned long len = length;
-	unsigned char tmp[AES_BLOCK_SIZE];
-	const unsigned char *iv = ivec;
-
-	assert(in && out && key && ivec);
-	assert((AES_ENCRYPT == enc)||(AES_DECRYPT == enc));
-
-	if (AES_ENCRYPT == enc) {
-		while (len >= AES_BLOCK_SIZE) {
-			for(n=0; n < AES_BLOCK_SIZE; ++n)
-				out[n] = in[n] ^ iv[n];
-			AES_encrypt(out, out, key);
-			iv = out;
-			len -= AES_BLOCK_SIZE;
-			in += AES_BLOCK_SIZE;
-			out += AES_BLOCK_SIZE;
-		}
-		if (len) {
-			for(n=0; n < len; ++n)
-				out[n] = in[n] ^ iv[n];
-			for(n=len; n < AES_BLOCK_SIZE; ++n)
-				out[n] = iv[n];
-			AES_encrypt(out, out, key);
-			iv = out;
-		}
-		memcpy(ivec,iv,AES_BLOCK_SIZE);
-	} else if (in != out) {
-		while (len >= AES_BLOCK_SIZE) {
-			AES_decrypt(in, out, key);
-			for(n=0; n < AES_BLOCK_SIZE; ++n)
-				out[n] ^= iv[n];
-			iv = in;
-			len -= AES_BLOCK_SIZE;
-			in  += AES_BLOCK_SIZE;
-			out += AES_BLOCK_SIZE;
-		}
-		if (len) {
-			AES_decrypt(in,tmp,key);
-			for(n=0; n < len; ++n)
-				out[n] = tmp[n] ^ iv[n];
-			iv = in;
-		}
-		memcpy(ivec,iv,AES_BLOCK_SIZE);
-	} else {
-		while (len >= AES_BLOCK_SIZE) {
-			memcpy(tmp, in, AES_BLOCK_SIZE);
-			AES_decrypt(in, out, key);
-			for(n=0; n < AES_BLOCK_SIZE; ++n)
-				out[n] ^= ivec[n];
-			memcpy(ivec, tmp, AES_BLOCK_SIZE);
-			len -= AES_BLOCK_SIZE;
-			in += AES_BLOCK_SIZE;
-			out += AES_BLOCK_SIZE;
-		}
-		if (len) {
-			memcpy(tmp, in, AES_BLOCK_SIZE);
-			AES_decrypt(tmp, out, key);
-			for(n=0; n < len; ++n)
-				out[n] ^= ivec[n];
-			for(n=len; n < AES_BLOCK_SIZE; ++n)
-				out[n] = tmp[n];
-			memcpy(ivec, tmp, AES_BLOCK_SIZE);
-		}
-	}
-}
diff --git a/crypto/openssl/crypto/aes/aes_cfb.c b/crypto/openssl/crypto/aes/aes_cfb.c
deleted file mode 100644
index 49f0411010c3..000000000000
--- a/crypto/openssl/crypto/aes/aes_cfb.c
+++ /dev/null
@@ -1,225 +0,0 @@
-/* crypto/aes/aes_cfb.c -*- mode:C; c-file-style: "eay" -*- */
-/* ====================================================================
- * Copyright (c) 1998-2002 The OpenSSL Project.  All rights reserved.
- *
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions
- * are met:
- *
- * 1. Redistributions of source code must retain the above copyright
- *    notice, this list of conditions and the following disclaimer. 
- *
- * 2. Redistributions in binary form must reproduce the above copyright
- *    notice, this list of conditions and the following disclaimer in
- *    the documentation and/or other materials provided with the
- *    distribution.
- *
- * 3. All advertising materials mentioning features or use of this
- *    software must display the following acknowledgment:
- *    "This product includes software developed by the OpenSSL Project
- *    for use in the OpenSSL Toolkit. (http://www.openssl.org/)"
- *
- * 4. The names "OpenSSL Toolkit" and "OpenSSL Project" must not be used to
- *    endorse or promote products derived from this software without
- *    prior written permission. For written permission, please contact
- *    openssl-core@openssl.org.
- *
- * 5. Products derived from this software may not be called "OpenSSL"
- *    nor may "OpenSSL" appear in their names without prior written
- *    permission of the OpenSSL Project.
- *
- * 6. Redistributions of any form whatsoever must retain the following
- *    acknowledgment:
- *    "This product includes software developed by the OpenSSL Project
- *    for use in the OpenSSL Toolkit (http://www.openssl.org/)"
- *
- * THIS SOFTWARE IS PROVIDED BY THE OpenSSL PROJECT ``AS IS'' AND ANY
- * EXPRESSED OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
- * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR
- * PURPOSE ARE DISCLAIMED.  IN NO EVENT SHALL THE OpenSSL PROJECT OR
- * ITS CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
- * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
- * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
- * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
- * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
- * STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
- * ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED
- * OF THE POSSIBILITY OF SUCH DAMAGE.
- * ====================================================================
- *
- */
-/* Copyright (C) 1995-1998 Eric Young (eay@cryptsoft.com)
- * All rights reserved.
- *
- * This package is an SSL implementation written
- * by Eric Young (eay@cryptsoft.com).
- * The implementation was written so as to conform with Netscapes SSL.
- * 
- * This library is free for commercial and non-commercial use as long as
- * the following conditions are aheared to.  The following conditions
- * apply to all code found in this distribution, be it the RC4, RSA,
- * lhash, DES, etc., code; not just the SSL code.  The SSL documentation
- * included with this distribution is covered by the same copyright terms
- * except that the holder is Tim Hudson (tjh@cryptsoft.com).
- * 
- * Copyright remains Eric Young's, and as such any Copyright notices in
- * the code are not to be removed.
- * If this package is used in a product, Eric Young should be given attribution
- * as the author of the parts of the library used.
- * This can be in the form of a textual message at program startup or
- * in documentation (online or textual) provided with the package.
- * 
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions
- * are met:
- * 1. Redistributions of source code must retain the copyright
- *    notice, this list of conditions and the following disclaimer.
- * 2. Redistributions in binary form must reproduce the above copyright
- *    notice, this list of conditions and the following disclaimer in the
- *    documentation and/or other materials provided with the distribution.
- * 3. All advertising materials mentioning features or use of this software
- *    must display the following acknowledgement:
- *    "This product includes cryptographic software written by
- *     Eric Young (eay@cryptsoft.com)"
- *    The word 'cryptographic' can be left out if the rouines from the library
- *    being used are not cryptographic related :-).
- * 4. If you include any Windows specific code (or a derivative thereof) from 
- *    the apps directory (application code) you must include an acknowledgement:
- *    "This product includes software written by Tim Hudson (tjh@cryptsoft.com)"
- * 
- * THIS SOFTWARE IS PROVIDED BY ERIC YOUNG ``AS IS'' AND
- * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
- * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
- * ARE DISCLAIMED.  IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE
- * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
- * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
- * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
- * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
- * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
- * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
- * SUCH DAMAGE.
- * 
- * The licence and distribution terms for any publically available version or
- * derivative of this code cannot be changed.  i.e. this code cannot simply be
- * copied and put under another distribution licence
- * [including the GNU Public Licence.]
- */
-
-#ifndef AES_DEBUG
-# ifndef NDEBUG
-#  define NDEBUG
-# endif
-#endif
-#include <assert.h>
-
-#include <openssl/aes.h>
-#include "aes_locl.h"
-#include "e_os.h"
-
-/* The input and output encrypted as though 128bit cfb mode is being
- * used.  The extra state information to record how much of the
- * 128bit block we have used is contained in *num;
- */
-
-void AES_cfb128_encrypt(const unsigned char *in, unsigned char *out,
-	const unsigned long length, const AES_KEY *key,
-	unsigned char *ivec, int *num, const int enc) {
-
-	unsigned int n;
-	unsigned long l = length;
-	unsigned char c;
-
-	assert(in && out && key && ivec && num);
-
-	n = *num;
-
-	if (enc) {
-		while (l--) {
-			if (n == 0) {
-				AES_encrypt(ivec, ivec, key);
-			}
-			ivec[n] = *(out++) = *(in++) ^ ivec[n];
-			n = (n+1) % AES_BLOCK_SIZE;
-		}
-	} else {
-		while (l--) {
-			if (n == 0) {
-				AES_encrypt(ivec, ivec, key);
-			}
-			c = *(in);
-			*(out++) = *(in++) ^ ivec[n];
-			ivec[n] = c;
-			n = (n+1) % AES_BLOCK_SIZE;
-		}
-	}
-
-	*num=n;
-}
-
-/* This expects a single block of size nbits for both in and out. Note that
-   it corrupts any extra bits in the last byte of out */
-void AES_cfbr_encrypt_block(const unsigned char *in,unsigned char *out,
-			    const int nbits,const AES_KEY *key,
-			    unsigned char *ivec,const int enc)
-    {
-    int n,rem,num;
-    unsigned char ovec[AES_BLOCK_SIZE*2];
-
-    if (nbits<=0 || nbits>128) return;
-
-	/* fill in the first half of the new IV with the current IV */
-	memcpy(ovec,ivec,AES_BLOCK_SIZE);
-	/* construct the new IV */
-	AES_encrypt(ivec,ivec,key);
-	num = (nbits+7)/8;
-	if (enc)	/* encrypt the input */
-	    for(n=0 ; n < num ; ++n)
-		out[n] = (ovec[AES_BLOCK_SIZE+n] = in[n] ^ ivec[n]);
-	else		/* decrypt the input */
-	    for(n=0 ; n < num ; ++n)
-		out[n] = (ovec[AES_BLOCK_SIZE+n] = in[n]) ^ ivec[n];
-	/* shift ovec left... */
-	rem = nbits%8;
-	num = nbits/8;
-	if(rem==0)
-	    memcpy(ivec,ovec+num,AES_BLOCK_SIZE);
-	else
-	    for(n=0 ; n < AES_BLOCK_SIZE ; ++n)
-		ivec[n] = ovec[n+num]<<rem | ovec[n+num+1]>>(8-rem);
-
-    /* it is not necessary to cleanse ovec, since the IV is not secret */
-    }
-
-/* N.B. This expects the input to be packed, MS bit first */
-void AES_cfb1_encrypt(const unsigned char *in, unsigned char *out,
-		      const unsigned long length, const AES_KEY *key,
-		      unsigned char *ivec, int *num, const int enc)
-    {
-    unsigned int n;
-    unsigned char c[1],d[1];
-
-    assert(in && out && key && ivec && num);
-    assert(*num == 0);
-
-    memset(out,0,(length+7)/8);
-    for(n=0 ; n < length ; ++n)
-	{
-	c[0]=(in[n/8]&(1 << (7-n%8))) ? 0x80 : 0;
-	AES_cfbr_encrypt_block(c,d,1,key,ivec,enc);
-	out[n/8]=(out[n/8]&~(1 << (7-n%8)))|((d[0]&0x80) >> (n%8));
-	}
-    }
-
-void AES_cfb8_encrypt(const unsigned char *in, unsigned char *out,
-		      const unsigned long length, const AES_KEY *key,
-		      unsigned char *ivec, int *num, const int enc)
-    {
-    unsigned int n;
-
-    assert(in && out && key && ivec && num);
-    assert(*num == 0);
-
-    for(n=0 ; n < length ; ++n)
-	AES_cfbr_encrypt_block(&in[n],&out[n],8,key,ivec,enc);
-    }
-
diff --git a/crypto/openssl/crypto/aes/aes_core.c b/crypto/openssl/crypto/aes/aes_core.c
deleted file mode 100644
index 3a80e18b0a48..000000000000
--- a/crypto/openssl/crypto/aes/aes_core.c
+++ /dev/null
@@ -1,1159 +0,0 @@
-/* crypto/aes/aes_core.c -*- mode:C; c-file-style: "eay" -*- */
-/**
- * rijndael-alg-fst.c
- *
- * @version 3.0 (December 2000)
- *
- * Optimised ANSI C code for the Rijndael cipher (now AES)
- *
- * @author Vincent Rijmen <vincent.rijmen@esat.kuleuven.ac.be>
- * @author Antoon Bosselaers <antoon.bosselaers@esat.kuleuven.ac.be>
- * @author Paulo Barreto <paulo.barreto@terra.com.br>
- *
- * This code is hereby placed in the public domain.
- *
- * THIS SOFTWARE IS PROVIDED BY THE AUTHORS ''AS IS'' AND ANY EXPRESS
- * OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
- * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
- * ARE DISCLAIMED.  IN NO EVENT SHALL THE AUTHORS OR CONTRIBUTORS BE
- * LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
- * CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
- * SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR
- * BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY,
- * WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE
- * OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE,
- * EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
- */
-
-/* Note: rewritten a little bit to provide error control and an OpenSSL-
-   compatible API */
-
-#ifndef AES_DEBUG
-# ifndef NDEBUG
-#  define NDEBUG
-# endif
-#endif
-#include <assert.h>
-
-#include <stdlib.h>
-#include <openssl/aes.h>
-#include "aes_locl.h"
-
-/*
-Te0[x] = S [x].[02, 01, 01, 03];
-Te1[x] = S [x].[03, 02, 01, 01];
-Te2[x] = S [x].[01, 03, 02, 01];
-Te3[x] = S [x].[01, 01, 03, 02];
-
-Td0[x] = Si[x].[0e, 09, 0d, 0b];
-Td1[x] = Si[x].[0b, 0e, 09, 0d];
-Td2[x] = Si[x].[0d, 0b, 0e, 09];
-Td3[x] = Si[x].[09, 0d, 0b, 0e];
-Td4[x] = Si[x].[01];
-*/
-
-static const u32 Te0[256] = {
-    0xc66363a5U, 0xf87c7c84U, 0xee777799U, 0xf67b7b8dU,
-    0xfff2f20dU, 0xd66b6bbdU, 0xde6f6fb1U, 0x91c5c554U,
-    0x60303050U, 0x02010103U, 0xce6767a9U, 0x562b2b7dU,
-    0xe7fefe19U, 0xb5d7d762U, 0x4dababe6U, 0xec76769aU,
-    0x8fcaca45U, 0x1f82829dU, 0x89c9c940U, 0xfa7d7d87U,
-    0xeffafa15U, 0xb25959ebU, 0x8e4747c9U, 0xfbf0f00bU,
-    0x41adadecU, 0xb3d4d467U, 0x5fa2a2fdU, 0x45afafeaU,
-    0x239c9cbfU, 0x53a4a4f7U, 0xe4727296U, 0x9bc0c05bU,
-    0x75b7b7c2U, 0xe1fdfd1cU, 0x3d9393aeU, 0x4c26266aU,
-    0x6c36365aU, 0x7e3f3f41U, 0xf5f7f702U, 0x83cccc4fU,
-    0x6834345cU, 0x51a5a5f4U, 0xd1e5e534U, 0xf9f1f108U,
-    0xe2717193U, 0xabd8d873U, 0x62313153U, 0x2a15153fU,
-    0x0804040cU, 0x95c7c752U, 0x46232365U, 0x9dc3c35eU,
-    0x30181828U, 0x379696a1U, 0x0a05050fU, 0x2f9a9ab5U,
-    0x0e070709U, 0x24121236U, 0x1b80809bU, 0xdfe2e23dU,
-    0xcdebeb26U, 0x4e272769U, 0x7fb2b2cdU, 0xea75759fU,
-    0x1209091bU, 0x1d83839eU, 0x582c2c74U, 0x341a1a2eU,
-    0x361b1b2dU, 0xdc6e6eb2U, 0xb45a5aeeU, 0x5ba0a0fbU,
-    0xa45252f6U, 0x763b3b4dU, 0xb7d6d661U, 0x7db3b3ceU,
-    0x5229297bU, 0xdde3e33eU, 0x5e2f2f71U, 0x13848497U,
-    0xa65353f5U, 0xb9d1d168U, 0x00000000U, 0xc1eded2cU,
-    0x40202060U, 0xe3fcfc1fU, 0x79b1b1c8U, 0xb65b5bedU,
-    0xd46a6abeU, 0x8dcbcb46U, 0x67bebed9U, 0x7239394bU,
-    0x944a4adeU, 0x984c4cd4U, 0xb05858e8U, 0x85cfcf4aU,
-    0xbbd0d06bU, 0xc5efef2aU, 0x4faaaae5U, 0xedfbfb16U,
-    0x864343c5U, 0x9a4d4dd7U, 0x66333355U, 0x11858594U,
-    0x8a4545cfU, 0xe9f9f910U, 0x04020206U, 0xfe7f7f81U,
-    0xa05050f0U, 0x783c3c44U, 0x259f9fbaU, 0x4ba8a8e3U,
-    0xa25151f3U, 0x5da3a3feU, 0x804040c0U, 0x058f8f8aU,
-    0x3f9292adU, 0x219d9dbcU, 0x70383848U, 0xf1f5f504U,
-    0x63bcbcdfU, 0x77b6b6c1U, 0xafdada75U, 0x42212163U,
-    0x20101030U, 0xe5ffff1aU, 0xfdf3f30eU, 0xbfd2d26dU,
-    0x81cdcd4cU, 0x180c0c14U, 0x26131335U, 0xc3ecec2fU,
-    0xbe5f5fe1U, 0x359797a2U, 0x884444ccU, 0x2e171739U,
-    0x93c4c457U, 0x55a7a7f2U, 0xfc7e7e82U, 0x7a3d3d47U,
-    0xc86464acU, 0xba5d5de7U, 0x3219192bU, 0xe6737395U,
-    0xc06060a0U, 0x19818198U, 0x9e4f4fd1U, 0xa3dcdc7fU,
-    0x44222266U, 0x542a2a7eU, 0x3b9090abU, 0x0b888883U,
-    0x8c4646caU, 0xc7eeee29U, 0x6bb8b8d3U, 0x2814143cU,
-    0xa7dede79U, 0xbc5e5ee2U, 0x160b0b1dU, 0xaddbdb76U,
-    0xdbe0e03bU, 0x64323256U, 0x743a3a4eU, 0x140a0a1eU,
-    0x924949dbU, 0x0c06060aU, 0x4824246cU, 0xb85c5ce4U,
-    0x9fc2c25dU, 0xbdd3d36eU, 0x43acacefU, 0xc46262a6U,
-    0x399191a8U, 0x319595a4U, 0xd3e4e437U, 0xf279798bU,
-    0xd5e7e732U, 0x8bc8c843U, 0x6e373759U, 0xda6d6db7U,
-    0x018d8d8cU, 0xb1d5d564U, 0x9c4e4ed2U, 0x49a9a9e0U,
-    0xd86c6cb4U, 0xac5656faU, 0xf3f4f407U, 0xcfeaea25U,
-    0xca6565afU, 0xf47a7a8eU, 0x47aeaee9U, 0x10080818U,
-    0x6fbabad5U, 0xf0787888U, 0x4a25256fU, 0x5c2e2e72U,
-    0x381c1c24U, 0x57a6a6f1U, 0x73b4b4c7U, 0x97c6c651U,
-    0xcbe8e823U, 0xa1dddd7cU, 0xe874749cU, 0x3e1f1f21U,
-    0x964b4bddU, 0x61bdbddcU, 0x0d8b8b86U, 0x0f8a8a85U,
-    0xe0707090U, 0x7c3e3e42U, 0x71b5b5c4U, 0xcc6666aaU,
-    0x904848d8U, 0x06030305U, 0xf7f6f601U, 0x1c0e0e12U,
-    0xc26161a3U, 0x6a35355fU, 0xae5757f9U, 0x69b9b9d0U,
-    0x17868691U, 0x99c1c158U, 0x3a1d1d27U, 0x279e9eb9U,
-    0xd9e1e138U, 0xebf8f813U, 0x2b9898b3U, 0x22111133U,
-    0xd26969bbU, 0xa9d9d970U, 0x078e8e89U, 0x339494a7U,
-    0x2d9b9bb6U, 0x3c1e1e22U, 0x15878792U, 0xc9e9e920U,
-    0x87cece49U, 0xaa5555ffU, 0x50282878U, 0xa5dfdf7aU,
-    0x038c8c8fU, 0x59a1a1f8U, 0x09898980U, 0x1a0d0d17U,
-    0x65bfbfdaU, 0xd7e6e631U, 0x844242c6U, 0xd06868b8U,
-    0x824141c3U, 0x299999b0U, 0x5a2d2d77U, 0x1e0f0f11U,
-    0x7bb0b0cbU, 0xa85454fcU, 0x6dbbbbd6U, 0x2c16163aU,
-};
-static const u32 Te1[256] = {
-    0xa5c66363U, 0x84f87c7cU, 0x99ee7777U, 0x8df67b7bU,
-    0x0dfff2f2U, 0xbdd66b6bU, 0xb1de6f6fU, 0x5491c5c5U,
-    0x50603030U, 0x03020101U, 0xa9ce6767U, 0x7d562b2bU,
-    0x19e7fefeU, 0x62b5d7d7U, 0xe64dababU, 0x9aec7676U,
-    0x458fcacaU, 0x9d1f8282U, 0x4089c9c9U, 0x87fa7d7dU,
-    0x15effafaU, 0xebb25959U, 0xc98e4747U, 0x0bfbf0f0U,
-    0xec41adadU, 0x67b3d4d4U, 0xfd5fa2a2U, 0xea45afafU,
-    0xbf239c9cU, 0xf753a4a4U, 0x96e47272U, 0x5b9bc0c0U,
-    0xc275b7b7U, 0x1ce1fdfdU, 0xae3d9393U, 0x6a4c2626U,
-    0x5a6c3636U, 0x417e3f3fU, 0x02f5f7f7U, 0x4f83ccccU,
-    0x5c683434U, 0xf451a5a5U, 0x34d1e5e5U, 0x08f9f1f1U,
-    0x93e27171U, 0x73abd8d8U, 0x53623131U, 0x3f2a1515U,
-    0x0c080404U, 0x5295c7c7U, 0x65462323U, 0x5e9dc3c3U,
-    0x28301818U, 0xa1379696U, 0x0f0a0505U, 0xb52f9a9aU,
-    0x090e0707U, 0x36241212U, 0x9b1b8080U, 0x3ddfe2e2U,
-    0x26cdebebU, 0x694e2727U, 0xcd7fb2b2U, 0x9fea7575U,
-    0x1b120909U, 0x9e1d8383U, 0x74582c2cU, 0x2e341a1aU,
-    0x2d361b1bU, 0xb2dc6e6eU, 0xeeb45a5aU, 0xfb5ba0a0U,
-    0xf6a45252U, 0x4d763b3bU, 0x61b7d6d6U, 0xce7db3b3U,
-    0x7b522929U, 0x3edde3e3U, 0x715e2f2fU, 0x97138484U,
-    0xf5a65353U, 0x68b9d1d1U, 0x00000000U, 0x2cc1ededU,
-    0x60402020U, 0x1fe3fcfcU, 0xc879b1b1U, 0xedb65b5bU,
-    0xbed46a6aU, 0x468dcbcbU, 0xd967bebeU, 0x4b723939U,
-    0xde944a4aU, 0xd4984c4cU, 0xe8b05858U, 0x4a85cfcfU,
-    0x6bbbd0d0U, 0x2ac5efefU, 0xe54faaaaU, 0x16edfbfbU,
-    0xc5864343U, 0xd79a4d4dU, 0x55663333U, 0x94118585U,
-    0xcf8a4545U, 0x10e9f9f9U, 0x06040202U, 0x81fe7f7fU,
-    0xf0a05050U, 0x44783c3cU, 0xba259f9fU, 0xe34ba8a8U,
-    0xf3a25151U, 0xfe5da3a3U, 0xc0804040U, 0x8a058f8fU,
-    0xad3f9292U, 0xbc219d9dU, 0x48703838U, 0x04f1f5f5U,
-    0xdf63bcbcU, 0xc177b6b6U, 0x75afdadaU, 0x63422121U,
-    0x30201010U, 0x1ae5ffffU, 0x0efdf3f3U, 0x6dbfd2d2U,
-    0x4c81cdcdU, 0x14180c0cU, 0x35261313U, 0x2fc3ececU,
-    0xe1be5f5fU, 0xa2359797U, 0xcc884444U, 0x392e1717U,
-    0x5793c4c4U, 0xf255a7a7U, 0x82fc7e7eU, 0x477a3d3dU,
-    0xacc86464U, 0xe7ba5d5dU, 0x2b321919U, 0x95e67373U,
-    0xa0c06060U, 0x98198181U, 0xd19e4f4fU, 0x7fa3dcdcU,
-    0x66442222U, 0x7e542a2aU, 0xab3b9090U, 0x830b8888U,
-    0xca8c4646U, 0x29c7eeeeU, 0xd36bb8b8U, 0x3c281414U,
-    0x79a7dedeU, 0xe2bc5e5eU, 0x1d160b0bU, 0x76addbdbU,
-    0x3bdbe0e0U, 0x56643232U, 0x4e743a3aU, 0x1e140a0aU,
-    0xdb924949U, 0x0a0c0606U, 0x6c482424U, 0xe4b85c5cU,
-    0x5d9fc2c2U, 0x6ebdd3d3U, 0xef43acacU, 0xa6c46262U,
-    0xa8399191U, 0xa4319595U, 0x37d3e4e4U, 0x8bf27979U,
-    0x32d5e7e7U, 0x438bc8c8U, 0x596e3737U, 0xb7da6d6dU,
-    0x8c018d8dU, 0x64b1d5d5U, 0xd29c4e4eU, 0xe049a9a9U,
-    0xb4d86c6cU, 0xfaac5656U, 0x07f3f4f4U, 0x25cfeaeaU,
-    0xafca6565U, 0x8ef47a7aU, 0xe947aeaeU, 0x18100808U,
-    0xd56fbabaU, 0x88f07878U, 0x6f4a2525U, 0x725c2e2eU,
-    0x24381c1cU, 0xf157a6a6U, 0xc773b4b4U, 0x5197c6c6U,
-    0x23cbe8e8U, 0x7ca1ddddU, 0x9ce87474U, 0x213e1f1fU,
-    0xdd964b4bU, 0xdc61bdbdU, 0x860d8b8bU, 0x850f8a8aU,
-    0x90e07070U, 0x427c3e3eU, 0xc471b5b5U, 0xaacc6666U,
-    0xd8904848U, 0x05060303U, 0x01f7f6f6U, 0x121c0e0eU,
-    0xa3c26161U, 0x5f6a3535U, 0xf9ae5757U, 0xd069b9b9U,
-    0x91178686U, 0x5899c1c1U, 0x273a1d1dU, 0xb9279e9eU,
-    0x38d9e1e1U, 0x13ebf8f8U, 0xb32b9898U, 0x33221111U,
-    0xbbd26969U, 0x70a9d9d9U, 0x89078e8eU, 0xa7339494U,
-    0xb62d9b9bU, 0x223c1e1eU, 0x92158787U, 0x20c9e9e9U,
-    0x4987ceceU, 0xffaa5555U, 0x78502828U, 0x7aa5dfdfU,
-    0x8f038c8cU, 0xf859a1a1U, 0x80098989U, 0x171a0d0dU,
-    0xda65bfbfU, 0x31d7e6e6U, 0xc6844242U, 0xb8d06868U,
-    0xc3824141U, 0xb0299999U, 0x775a2d2dU, 0x111e0f0fU,
-    0xcb7bb0b0U, 0xfca85454U, 0xd66dbbbbU, 0x3a2c1616U,
-};
-static const u32 Te2[256] = {
-    0x63a5c663U, 0x7c84f87cU, 0x7799ee77U, 0x7b8df67bU,
-    0xf20dfff2U, 0x6bbdd66bU, 0x6fb1de6fU, 0xc55491c5U,
-    0x30506030U, 0x01030201U, 0x67a9ce67U, 0x2b7d562bU,
-    0xfe19e7feU, 0xd762b5d7U, 0xabe64dabU, 0x769aec76U,
-    0xca458fcaU, 0x829d1f82U, 0xc94089c9U, 0x7d87fa7dU,
-    0xfa15effaU, 0x59ebb259U, 0x47c98e47U, 0xf00bfbf0U,
-    0xadec41adU, 0xd467b3d4U, 0xa2fd5fa2U, 0xafea45afU,
-    0x9cbf239cU, 0xa4f753a4U, 0x7296e472U, 0xc05b9bc0U,
-    0xb7c275b7U, 0xfd1ce1fdU, 0x93ae3d93U, 0x266a4c26U,
-    0x365a6c36U, 0x3f417e3fU, 0xf702f5f7U, 0xcc4f83ccU,
-    0x345c6834U, 0xa5f451a5U, 0xe534d1e5U, 0xf108f9f1U,
-    0x7193e271U, 0xd873abd8U, 0x31536231U, 0x153f2a15U,
-    0x040c0804U, 0xc75295c7U, 0x23654623U, 0xc35e9dc3U,
-    0x18283018U, 0x96a13796U, 0x050f0a05U, 0x9ab52f9aU,
-    0x07090e07U, 0x12362412U, 0x809b1b80U, 0xe23ddfe2U,
-    0xeb26cdebU, 0x27694e27U, 0xb2cd7fb2U, 0x759fea75U,
-    0x091b1209U, 0x839e1d83U, 0x2c74582cU, 0x1a2e341aU,
-    0x1b2d361bU, 0x6eb2dc6eU, 0x5aeeb45aU, 0xa0fb5ba0U,
-    0x52f6a452U, 0x3b4d763bU, 0xd661b7d6U, 0xb3ce7db3U,
-    0x297b5229U, 0xe33edde3U, 0x2f715e2fU, 0x84971384U,
-    0x53f5a653U, 0xd168b9d1U, 0x00000000U, 0xed2cc1edU,
-    0x20604020U, 0xfc1fe3fcU, 0xb1c879b1U, 0x5bedb65bU,
-    0x6abed46aU, 0xcb468dcbU, 0xbed967beU, 0x394b7239U,
-    0x4ade944aU, 0x4cd4984cU, 0x58e8b058U, 0xcf4a85cfU,
-    0xd06bbbd0U, 0xef2ac5efU, 0xaae54faaU, 0xfb16edfbU,
-    0x43c58643U, 0x4dd79a4dU, 0x33556633U, 0x85941185U,
-    0x45cf8a45U, 0xf910e9f9U, 0x02060402U, 0x7f81fe7fU,
-    0x50f0a050U, 0x3c44783cU, 0x9fba259fU, 0xa8e34ba8U,
-    0x51f3a251U, 0xa3fe5da3U, 0x40c08040U, 0x8f8a058fU,
-    0x92ad3f92U, 0x9dbc219dU, 0x38487038U, 0xf504f1f5U,
-    0xbcdf63bcU, 0xb6c177b6U, 0xda75afdaU, 0x21634221U,
-    0x10302010U, 0xff1ae5ffU, 0xf30efdf3U, 0xd26dbfd2U,
-    0xcd4c81cdU, 0x0c14180cU, 0x13352613U, 0xec2fc3ecU,
-    0x5fe1be5fU, 0x97a23597U, 0x44cc8844U, 0x17392e17U,
-    0xc45793c4U, 0xa7f255a7U, 0x7e82fc7eU, 0x3d477a3dU,
-    0x64acc864U, 0x5de7ba5dU, 0x192b3219U, 0x7395e673U,
-    0x60a0c060U, 0x81981981U, 0x4fd19e4fU, 0xdc7fa3dcU,
-    0x22664422U, 0x2a7e542aU, 0x90ab3b90U, 0x88830b88U,
-    0x46ca8c46U, 0xee29c7eeU, 0xb8d36bb8U, 0x143c2814U,
-    0xde79a7deU, 0x5ee2bc5eU, 0x0b1d160bU, 0xdb76addbU,
-    0xe03bdbe0U, 0x32566432U, 0x3a4e743aU, 0x0a1e140aU,
-    0x49db9249U, 0x060a0c06U, 0x246c4824U, 0x5ce4b85cU,
-    0xc25d9fc2U, 0xd36ebdd3U, 0xacef43acU, 0x62a6c462U,
-    0x91a83991U, 0x95a43195U, 0xe437d3e4U, 0x798bf279U,
-    0xe732d5e7U, 0xc8438bc8U, 0x37596e37U, 0x6db7da6dU,
-    0x8d8c018dU, 0xd564b1d5U, 0x4ed29c4eU, 0xa9e049a9U,
-    0x6cb4d86cU, 0x56faac56U, 0xf407f3f4U, 0xea25cfeaU,
-    0x65afca65U, 0x7a8ef47aU, 0xaee947aeU, 0x08181008U,
-    0xbad56fbaU, 0x7888f078U, 0x256f4a25U, 0x2e725c2eU,
-    0x1c24381cU, 0xa6f157a6U, 0xb4c773b4U, 0xc65197c6U,
-    0xe823cbe8U, 0xdd7ca1ddU, 0x749ce874U, 0x1f213e1fU,
-    0x4bdd964bU, 0xbddc61bdU, 0x8b860d8bU, 0x8a850f8aU,
-    0x7090e070U, 0x3e427c3eU, 0xb5c471b5U, 0x66aacc66U,
-    0x48d89048U, 0x03050603U, 0xf601f7f6U, 0x0e121c0eU,
-    0x61a3c261U, 0x355f6a35U, 0x57f9ae57U, 0xb9d069b9U,
-    0x86911786U, 0xc15899c1U, 0x1d273a1dU, 0x9eb9279eU,
-    0xe138d9e1U, 0xf813ebf8U, 0x98b32b98U, 0x11332211U,
-    0x69bbd269U, 0xd970a9d9U, 0x8e89078eU, 0x94a73394U,
-    0x9bb62d9bU, 0x1e223c1eU, 0x87921587U, 0xe920c9e9U,
-    0xce4987ceU, 0x55ffaa55U, 0x28785028U, 0xdf7aa5dfU,
-    0x8c8f038cU, 0xa1f859a1U, 0x89800989U, 0x0d171a0dU,
-    0xbfda65bfU, 0xe631d7e6U, 0x42c68442U, 0x68b8d068U,
-    0x41c38241U, 0x99b02999U, 0x2d775a2dU, 0x0f111e0fU,
-    0xb0cb7bb0U, 0x54fca854U, 0xbbd66dbbU, 0x163a2c16U,
-};
-static const u32 Te3[256] = {
-    0x6363a5c6U, 0x7c7c84f8U, 0x777799eeU, 0x7b7b8df6U,
-    0xf2f20dffU, 0x6b6bbdd6U, 0x6f6fb1deU, 0xc5c55491U,
-    0x30305060U, 0x01010302U, 0x6767a9ceU, 0x2b2b7d56U,
-    0xfefe19e7U, 0xd7d762b5U, 0xababe64dU, 0x76769aecU,
-    0xcaca458fU, 0x82829d1fU, 0xc9c94089U, 0x7d7d87faU,
-    0xfafa15efU, 0x5959ebb2U, 0x4747c98eU, 0xf0f00bfbU,
-    0xadadec41U, 0xd4d467b3U, 0xa2a2fd5fU, 0xafafea45U,
-    0x9c9cbf23U, 0xa4a4f753U, 0x727296e4U, 0xc0c05b9bU,
-    0xb7b7c275U, 0xfdfd1ce1U, 0x9393ae3dU, 0x26266a4cU,
-    0x36365a6cU, 0x3f3f417eU, 0xf7f702f5U, 0xcccc4f83U,
-    0x34345c68U, 0xa5a5f451U, 0xe5e534d1U, 0xf1f108f9U,
-    0x717193e2U, 0xd8d873abU, 0x31315362U, 0x15153f2aU,
-    0x04040c08U, 0xc7c75295U, 0x23236546U, 0xc3c35e9dU,
-    0x18182830U, 0x9696a137U, 0x05050f0aU, 0x9a9ab52fU,
-    0x0707090eU, 0x12123624U, 0x80809b1bU, 0xe2e23ddfU,
-    0xebeb26cdU, 0x2727694eU, 0xb2b2cd7fU, 0x75759feaU,
-    0x09091b12U, 0x83839e1dU, 0x2c2c7458U, 0x1a1a2e34U,
-    0x1b1b2d36U, 0x6e6eb2dcU, 0x5a5aeeb4U, 0xa0a0fb5bU,
-    0x5252f6a4U, 0x3b3b4d76U, 0xd6d661b7U, 0xb3b3ce7dU,
-    0x29297b52U, 0xe3e33eddU, 0x2f2f715eU, 0x84849713U,
-    0x5353f5a6U, 0xd1d168b9U, 0x00000000U, 0xeded2cc1U,
-    0x20206040U, 0xfcfc1fe3U, 0xb1b1c879U, 0x5b5bedb6U,
-    0x6a6abed4U, 0xcbcb468dU, 0xbebed967U, 0x39394b72U,
-    0x4a4ade94U, 0x4c4cd498U, 0x5858e8b0U, 0xcfcf4a85U,
-    0xd0d06bbbU, 0xefef2ac5U, 0xaaaae54fU, 0xfbfb16edU,
-    0x4343c586U, 0x4d4dd79aU, 0x33335566U, 0x85859411U,
-    0x4545cf8aU, 0xf9f910e9U, 0x02020604U, 0x7f7f81feU,
-    0x5050f0a0U, 0x3c3c4478U, 0x9f9fba25U, 0xa8a8e34bU,
-    0x5151f3a2U, 0xa3a3fe5dU, 0x4040c080U, 0x8f8f8a05U,
-    0x9292ad3fU, 0x9d9dbc21U, 0x38384870U, 0xf5f504f1U,
-    0xbcbcdf63U, 0xb6b6c177U, 0xdada75afU, 0x21216342U,
-    0x10103020U, 0xffff1ae5U, 0xf3f30efdU, 0xd2d26dbfU,
-    0xcdcd4c81U, 0x0c0c1418U, 0x13133526U, 0xecec2fc3U,
-    0x5f5fe1beU, 0x9797a235U, 0x4444cc88U, 0x1717392eU,
-    0xc4c45793U, 0xa7a7f255U, 0x7e7e82fcU, 0x3d3d477aU,
-    0x6464acc8U, 0x5d5de7baU, 0x19192b32U, 0x737395e6U,
-    0x6060a0c0U, 0x81819819U, 0x4f4fd19eU, 0xdcdc7fa3U,
-    0x22226644U, 0x2a2a7e54U, 0x9090ab3bU, 0x8888830bU,
-    0x4646ca8cU, 0xeeee29c7U, 0xb8b8d36bU, 0x14143c28U,
-    0xdede79a7U, 0x5e5ee2bcU, 0x0b0b1d16U, 0xdbdb76adU,
-    0xe0e03bdbU, 0x32325664U, 0x3a3a4e74U, 0x0a0a1e14U,
-    0x4949db92U, 0x06060a0cU, 0x24246c48U, 0x5c5ce4b8U,
-    0xc2c25d9fU, 0xd3d36ebdU, 0xacacef43U, 0x6262a6c4U,
-    0x9191a839U, 0x9595a431U, 0xe4e437d3U, 0x79798bf2U,
-    0xe7e732d5U, 0xc8c8438bU, 0x3737596eU, 0x6d6db7daU,
-    0x8d8d8c01U, 0xd5d564b1U, 0x4e4ed29cU, 0xa9a9e049U,
-    0x6c6cb4d8U, 0x5656faacU, 0xf4f407f3U, 0xeaea25cfU,
-    0x6565afcaU, 0x7a7a8ef4U, 0xaeaee947U, 0x08081810U,
-    0xbabad56fU, 0x787888f0U, 0x25256f4aU, 0x2e2e725cU,
-    0x1c1c2438U, 0xa6a6f157U, 0xb4b4c773U, 0xc6c65197U,
-    0xe8e823cbU, 0xdddd7ca1U, 0x74749ce8U, 0x1f1f213eU,
-    0x4b4bdd96U, 0xbdbddc61U, 0x8b8b860dU, 0x8a8a850fU,
-    0x707090e0U, 0x3e3e427cU, 0xb5b5c471U, 0x6666aaccU,
-    0x4848d890U, 0x03030506U, 0xf6f601f7U, 0x0e0e121cU,
-    0x6161a3c2U, 0x35355f6aU, 0x5757f9aeU, 0xb9b9d069U,
-    0x86869117U, 0xc1c15899U, 0x1d1d273aU, 0x9e9eb927U,
-    0xe1e138d9U, 0xf8f813ebU, 0x9898b32bU, 0x11113322U,
-    0x6969bbd2U, 0xd9d970a9U, 0x8e8e8907U, 0x9494a733U,
-    0x9b9bb62dU, 0x1e1e223cU, 0x87879215U, 0xe9e920c9U,
-    0xcece4987U, 0x5555ffaaU, 0x28287850U, 0xdfdf7aa5U,
-    0x8c8c8f03U, 0xa1a1f859U, 0x89898009U, 0x0d0d171aU,
-    0xbfbfda65U, 0xe6e631d7U, 0x4242c684U, 0x6868b8d0U,
-    0x4141c382U, 0x9999b029U, 0x2d2d775aU, 0x0f0f111eU,
-    0xb0b0cb7bU, 0x5454fca8U, 0xbbbbd66dU, 0x16163a2cU,
-};
-
-static const u32 Td0[256] = {
-    0x51f4a750U, 0x7e416553U, 0x1a17a4c3U, 0x3a275e96U,
-    0x3bab6bcbU, 0x1f9d45f1U, 0xacfa58abU, 0x4be30393U,
-    0x2030fa55U, 0xad766df6U, 0x88cc7691U, 0xf5024c25U,
-    0x4fe5d7fcU, 0xc52acbd7U, 0x26354480U, 0xb562a38fU,
-    0xdeb15a49U, 0x25ba1b67U, 0x45ea0e98U, 0x5dfec0e1U,
-    0xc32f7502U, 0x814cf012U, 0x8d4697a3U, 0x6bd3f9c6U,
-    0x038f5fe7U, 0x15929c95U, 0xbf6d7aebU, 0x955259daU,
-    0xd4be832dU, 0x587421d3U, 0x49e06929U, 0x8ec9c844U,
-    0x75c2896aU, 0xf48e7978U, 0x99583e6bU, 0x27b971ddU,
-    0xbee14fb6U, 0xf088ad17U, 0xc920ac66U, 0x7dce3ab4U,
-    0x63df4a18U, 0xe51a3182U, 0x97513360U, 0x62537f45U,
-    0xb16477e0U, 0xbb6bae84U, 0xfe81a01cU, 0xf9082b94U,
-    0x70486858U, 0x8f45fd19U, 0x94de6c87U, 0x527bf8b7U,
-    0xab73d323U, 0x724b02e2U, 0xe31f8f57U, 0x6655ab2aU,
-    0xb2eb2807U, 0x2fb5c203U, 0x86c57b9aU, 0xd33708a5U,
-    0x302887f2U, 0x23bfa5b2U, 0x02036abaU, 0xed16825cU,
-    0x8acf1c2bU, 0xa779b492U, 0xf307f2f0U, 0x4e69e2a1U,
-    0x65daf4cdU, 0x0605bed5U, 0xd134621fU, 0xc4a6fe8aU,
-    0x342e539dU, 0xa2f355a0U, 0x058ae132U, 0xa4f6eb75U,
-    0x0b83ec39U, 0x4060efaaU, 0x5e719f06U, 0xbd6e1051U,
-    0x3e218af9U, 0x96dd063dU, 0xdd3e05aeU, 0x4de6bd46U,
-    0x91548db5U, 0x71c45d05U, 0x0406d46fU, 0x605015ffU,
-    0x1998fb24U, 0xd6bde997U, 0x894043ccU, 0x67d99e77U,
-    0xb0e842bdU, 0x07898b88U, 0xe7195b38U, 0x79c8eedbU,
-    0xa17c0a47U, 0x7c420fe9U, 0xf8841ec9U, 0x00000000U,
-    0x09808683U, 0x322bed48U, 0x1e1170acU, 0x6c5a724eU,
-    0xfd0efffbU, 0x0f853856U, 0x3daed51eU, 0x362d3927U,
-    0x0a0fd964U, 0x685ca621U, 0x9b5b54d1U, 0x24362e3aU,
-    0x0c0a67b1U, 0x9357e70fU, 0xb4ee96d2U, 0x1b9b919eU,
-    0x80c0c54fU, 0x61dc20a2U, 0x5a774b69U, 0x1c121a16U,
-    0xe293ba0aU, 0xc0a02ae5U, 0x3c22e043U, 0x121b171dU,
-    0x0e090d0bU, 0xf28bc7adU, 0x2db6a8b9U, 0x141ea9c8U,
-    0x57f11985U, 0xaf75074cU, 0xee99ddbbU, 0xa37f60fdU,
-    0xf701269fU, 0x5c72f5bcU, 0x44663bc5U, 0x5bfb7e34U,
-    0x8b432976U, 0xcb23c6dcU, 0xb6edfc68U, 0xb8e4f163U,
-    0xd731dccaU, 0x42638510U, 0x13972240U, 0x84c61120U,
-    0x854a247dU, 0xd2bb3df8U, 0xaef93211U, 0xc729a16dU,
-    0x1d9e2f4bU, 0xdcb230f3U, 0x0d8652ecU, 0x77c1e3d0U,
-    0x2bb3166cU, 0xa970b999U, 0x119448faU, 0x47e96422U,
-    0xa8fc8cc4U, 0xa0f03f1aU, 0x567d2cd8U, 0x223390efU,
-    0x87494ec7U, 0xd938d1c1U, 0x8ccaa2feU, 0x98d40b36U,
-    0xa6f581cfU, 0xa57ade28U, 0xdab78e26U, 0x3fadbfa4U,
-    0x2c3a9de4U, 0x5078920dU, 0x6a5fcc9bU, 0x547e4662U,
-    0xf68d13c2U, 0x90d8b8e8U, 0x2e39f75eU, 0x82c3aff5U,
-    0x9f5d80beU, 0x69d0937cU, 0x6fd52da9U, 0xcf2512b3U,
-    0xc8ac993bU, 0x10187da7U, 0xe89c636eU, 0xdb3bbb7bU,
-    0xcd267809U, 0x6e5918f4U, 0xec9ab701U, 0x834f9aa8U,
-    0xe6956e65U, 0xaaffe67eU, 0x21bccf08U, 0xef15e8e6U,
-    0xbae79bd9U, 0x4a6f36ceU, 0xea9f09d4U, 0x29b07cd6U,
-    0x31a4b2afU, 0x2a3f2331U, 0xc6a59430U, 0x35a266c0U,
-    0x744ebc37U, 0xfc82caa6U, 0xe090d0b0U, 0x33a7d815U,
-    0xf104984aU, 0x41ecdaf7U, 0x7fcd500eU, 0x1791f62fU,
-    0x764dd68dU, 0x43efb04dU, 0xccaa4d54U, 0xe49604dfU,
-    0x9ed1b5e3U, 0x4c6a881bU, 0xc12c1fb8U, 0x4665517fU,
-    0x9d5eea04U, 0x018c355dU, 0xfa877473U, 0xfb0b412eU,
-    0xb3671d5aU, 0x92dbd252U, 0xe9105633U, 0x6dd64713U,
-    0x9ad7618cU, 0x37a10c7aU, 0x59f8148eU, 0xeb133c89U,
-    0xcea927eeU, 0xb761c935U, 0xe11ce5edU, 0x7a47b13cU,
-    0x9cd2df59U, 0x55f2733fU, 0x1814ce79U, 0x73c737bfU,
-    0x53f7cdeaU, 0x5ffdaa5bU, 0xdf3d6f14U, 0x7844db86U,
-    0xcaaff381U, 0xb968c43eU, 0x3824342cU, 0xc2a3405fU,
-    0x161dc372U, 0xbce2250cU, 0x283c498bU, 0xff0d9541U,
-    0x39a80171U, 0x080cb3deU, 0xd8b4e49cU, 0x6456c190U,
-    0x7bcb8461U, 0xd532b670U, 0x486c5c74U, 0xd0b85742U,
-};
-static const u32 Td1[256] = {
-    0x5051f4a7U, 0x537e4165U, 0xc31a17a4U, 0x963a275eU,
-    0xcb3bab6bU, 0xf11f9d45U, 0xabacfa58U, 0x934be303U,
-    0x552030faU, 0xf6ad766dU, 0x9188cc76U, 0x25f5024cU,
-    0xfc4fe5d7U, 0xd7c52acbU, 0x80263544U, 0x8fb562a3U,
-    0x49deb15aU, 0x6725ba1bU, 0x9845ea0eU, 0xe15dfec0U,
-    0x02c32f75U, 0x12814cf0U, 0xa38d4697U, 0xc66bd3f9U,
-    0xe7038f5fU, 0x9515929cU, 0xebbf6d7aU, 0xda955259U,
-    0x2dd4be83U, 0xd3587421U, 0x2949e069U, 0x448ec9c8U,
-    0x6a75c289U, 0x78f48e79U, 0x6b99583eU, 0xdd27b971U,
-    0xb6bee14fU, 0x17f088adU, 0x66c920acU, 0xb47dce3aU,
-    0x1863df4aU, 0x82e51a31U, 0x60975133U, 0x4562537fU,
-    0xe0b16477U, 0x84bb6baeU, 0x1cfe81a0U, 0x94f9082bU,
-    0x58704868U, 0x198f45fdU, 0x8794de6cU, 0xb7527bf8U,
-    0x23ab73d3U, 0xe2724b02U, 0x57e31f8fU, 0x2a6655abU,
-    0x07b2eb28U, 0x032fb5c2U, 0x9a86c57bU, 0xa5d33708U,
-    0xf2302887U, 0xb223bfa5U, 0xba02036aU, 0x5ced1682U,
-    0x2b8acf1cU, 0x92a779b4U, 0xf0f307f2U, 0xa14e69e2U,
-    0xcd65daf4U, 0xd50605beU, 0x1fd13462U, 0x8ac4a6feU,
-    0x9d342e53U, 0xa0a2f355U, 0x32058ae1U, 0x75a4f6ebU,
-    0x390b83ecU, 0xaa4060efU, 0x065e719fU, 0x51bd6e10U,
-    0xf93e218aU, 0x3d96dd06U, 0xaedd3e05U, 0x464de6bdU,
-    0xb591548dU, 0x0571c45dU, 0x6f0406d4U, 0xff605015U,
-    0x241998fbU, 0x97d6bde9U, 0xcc894043U, 0x7767d99eU,
-    0xbdb0e842U, 0x8807898bU, 0x38e7195bU, 0xdb79c8eeU,
-    0x47a17c0aU, 0xe97c420fU, 0xc9f8841eU, 0x00000000U,
-    0x83098086U, 0x48322bedU, 0xac1e1170U, 0x4e6c5a72U,
-    0xfbfd0effU, 0x560f8538U, 0x1e3daed5U, 0x27362d39U,
-    0x640a0fd9U, 0x21685ca6U, 0xd19b5b54U, 0x3a24362eU,
-    0xb10c0a67U, 0x0f9357e7U, 0xd2b4ee96U, 0x9e1b9b91U,
-    0x4f80c0c5U, 0xa261dc20U, 0x695a774bU, 0x161c121aU,
-    0x0ae293baU, 0xe5c0a02aU, 0x433c22e0U, 0x1d121b17U,
-    0x0b0e090dU, 0xadf28bc7U, 0xb92db6a8U, 0xc8141ea9U,
-    0x8557f119U, 0x4caf7507U, 0xbbee99ddU, 0xfda37f60U,
-    0x9ff70126U, 0xbc5c72f5U, 0xc544663bU, 0x345bfb7eU,
-    0x768b4329U, 0xdccb23c6U, 0x68b6edfcU, 0x63b8e4f1U,
-    0xcad731dcU, 0x10426385U, 0x40139722U, 0x2084c611U,
-    0x7d854a24U, 0xf8d2bb3dU, 0x11aef932U, 0x6dc729a1U,
-    0x4b1d9e2fU, 0xf3dcb230U, 0xec0d8652U, 0xd077c1e3U,
-    0x6c2bb316U, 0x99a970b9U, 0xfa119448U, 0x2247e964U,
-    0xc4a8fc8cU, 0x1aa0f03fU, 0xd8567d2cU, 0xef223390U,
-    0xc787494eU, 0xc1d938d1U, 0xfe8ccaa2U, 0x3698d40bU,
-    0xcfa6f581U, 0x28a57adeU, 0x26dab78eU, 0xa43fadbfU,
-    0xe42c3a9dU, 0x0d507892U, 0x9b6a5fccU, 0x62547e46U,
-    0xc2f68d13U, 0xe890d8b8U, 0x5e2e39f7U, 0xf582c3afU,
-    0xbe9f5d80U, 0x7c69d093U, 0xa96fd52dU, 0xb3cf2512U,
-    0x3bc8ac99U, 0xa710187dU, 0x6ee89c63U, 0x7bdb3bbbU,
-    0x09cd2678U, 0xf46e5918U, 0x01ec9ab7U, 0xa8834f9aU,
-    0x65e6956eU, 0x7eaaffe6U, 0x0821bccfU, 0xe6ef15e8U,
-    0xd9bae79bU, 0xce4a6f36U, 0xd4ea9f09U, 0xd629b07cU,
-    0xaf31a4b2U, 0x312a3f23U, 0x30c6a594U, 0xc035a266U,
-    0x37744ebcU, 0xa6fc82caU, 0xb0e090d0U, 0x1533a7d8U,
-    0x4af10498U, 0xf741ecdaU, 0x0e7fcd50U, 0x2f1791f6U,
-    0x8d764dd6U, 0x4d43efb0U, 0x54ccaa4dU, 0xdfe49604U,
-    0xe39ed1b5U, 0x1b4c6a88U, 0xb8c12c1fU, 0x7f466551U,
-    0x049d5eeaU, 0x5d018c35U, 0x73fa8774U, 0x2efb0b41U,
-    0x5ab3671dU, 0x5292dbd2U, 0x33e91056U, 0x136dd647U,
-    0x8c9ad761U, 0x7a37a10cU, 0x8e59f814U, 0x89eb133cU,
-    0xeecea927U, 0x35b761c9U, 0xede11ce5U, 0x3c7a47b1U,
-    0x599cd2dfU, 0x3f55f273U, 0x791814ceU, 0xbf73c737U,
-    0xea53f7cdU, 0x5b5ffdaaU, 0x14df3d6fU, 0x867844dbU,
-    0x81caaff3U, 0x3eb968c4U, 0x2c382434U, 0x5fc2a340U,
-    0x72161dc3U, 0x0cbce225U, 0x8b283c49U, 0x41ff0d95U,
-    0x7139a801U, 0xde080cb3U, 0x9cd8b4e4U, 0x906456c1U,
-    0x617bcb84U, 0x70d532b6U, 0x74486c5cU, 0x42d0b857U,
-};
-static const u32 Td2[256] = {
-    0xa75051f4U, 0x65537e41U, 0xa4c31a17U, 0x5e963a27U,
-    0x6bcb3babU, 0x45f11f9dU, 0x58abacfaU, 0x03934be3U,
-    0xfa552030U, 0x6df6ad76U, 0x769188ccU, 0x4c25f502U,
-    0xd7fc4fe5U, 0xcbd7c52aU, 0x44802635U, 0xa38fb562U,
-    0x5a49deb1U, 0x1b6725baU, 0x0e9845eaU, 0xc0e15dfeU,
-    0x7502c32fU, 0xf012814cU, 0x97a38d46U, 0xf9c66bd3U,
-    0x5fe7038fU, 0x9c951592U, 0x7aebbf6dU, 0x59da9552U,
-    0x832dd4beU, 0x21d35874U, 0x692949e0U, 0xc8448ec9U,
-    0x896a75c2U, 0x7978f48eU, 0x3e6b9958U, 0x71dd27b9U,
-    0x4fb6bee1U, 0xad17f088U, 0xac66c920U, 0x3ab47dceU,
-    0x4a1863dfU, 0x3182e51aU, 0x33609751U, 0x7f456253U,
-    0x77e0b164U, 0xae84bb6bU, 0xa01cfe81U, 0x2b94f908U,
-    0x68587048U, 0xfd198f45U, 0x6c8794deU, 0xf8b7527bU,
-    0xd323ab73U, 0x02e2724bU, 0x8f57e31fU, 0xab2a6655U,
-    0x2807b2ebU, 0xc2032fb5U, 0x7b9a86c5U, 0x08a5d337U,
-    0x87f23028U, 0xa5b223bfU, 0x6aba0203U, 0x825ced16U,
-    0x1c2b8acfU, 0xb492a779U, 0xf2f0f307U, 0xe2a14e69U,
-    0xf4cd65daU, 0xbed50605U, 0x621fd134U, 0xfe8ac4a6U,
-    0x539d342eU, 0x55a0a2f3U, 0xe132058aU, 0xeb75a4f6U,
-    0xec390b83U, 0xefaa4060U, 0x9f065e71U, 0x1051bd6eU,
-    0x8af93e21U, 0x063d96ddU, 0x05aedd3eU, 0xbd464de6U,
-    0x8db59154U, 0x5d0571c4U, 0xd46f0406U, 0x15ff6050U,
-    0xfb241998U, 0xe997d6bdU, 0x43cc8940U, 0x9e7767d9U,
-    0x42bdb0e8U, 0x8b880789U, 0x5b38e719U, 0xeedb79c8U,
-    0x0a47a17cU, 0x0fe97c42U, 0x1ec9f884U, 0x00000000U,
-    0x86830980U, 0xed48322bU, 0x70ac1e11U, 0x724e6c5aU,
-    0xfffbfd0eU, 0x38560f85U, 0xd51e3daeU, 0x3927362dU,
-    0xd9640a0fU, 0xa621685cU, 0x54d19b5bU, 0x2e3a2436U,
-    0x67b10c0aU, 0xe70f9357U, 0x96d2b4eeU, 0x919e1b9bU,
-    0xc54f80c0U, 0x20a261dcU, 0x4b695a77U, 0x1a161c12U,
-    0xba0ae293U, 0x2ae5c0a0U, 0xe0433c22U, 0x171d121bU,
-    0x0d0b0e09U, 0xc7adf28bU, 0xa8b92db6U, 0xa9c8141eU,
-    0x198557f1U, 0x074caf75U, 0xddbbee99U, 0x60fda37fU,
-    0x269ff701U, 0xf5bc5c72U, 0x3bc54466U, 0x7e345bfbU,
-    0x29768b43U, 0xc6dccb23U, 0xfc68b6edU, 0xf163b8e4U,
-    0xdccad731U, 0x85104263U, 0x22401397U, 0x112084c6U,
-    0x247d854aU, 0x3df8d2bbU, 0x3211aef9U, 0xa16dc729U,
-    0x2f4b1d9eU, 0x30f3dcb2U, 0x52ec0d86U, 0xe3d077c1U,
-    0x166c2bb3U, 0xb999a970U, 0x48fa1194U, 0x642247e9U,
-    0x8cc4a8fcU, 0x3f1aa0f0U, 0x2cd8567dU, 0x90ef2233U,
-    0x4ec78749U, 0xd1c1d938U, 0xa2fe8ccaU, 0x0b3698d4U,
-    0x81cfa6f5U, 0xde28a57aU, 0x8e26dab7U, 0xbfa43fadU,
-    0x9de42c3aU, 0x920d5078U, 0xcc9b6a5fU, 0x4662547eU,
-    0x13c2f68dU, 0xb8e890d8U, 0xf75e2e39U, 0xaff582c3U,
-    0x80be9f5dU, 0x937c69d0U, 0x2da96fd5U, 0x12b3cf25U,
-    0x993bc8acU, 0x7da71018U, 0x636ee89cU, 0xbb7bdb3bU,
-    0x7809cd26U, 0x18f46e59U, 0xb701ec9aU, 0x9aa8834fU,
-    0x6e65e695U, 0xe67eaaffU, 0xcf0821bcU, 0xe8e6ef15U,
-    0x9bd9bae7U, 0x36ce4a6fU, 0x09d4ea9fU, 0x7cd629b0U,
-    0xb2af31a4U, 0x23312a3fU, 0x9430c6a5U, 0x66c035a2U,
-    0xbc37744eU, 0xcaa6fc82U, 0xd0b0e090U, 0xd81533a7U,
-    0x984af104U, 0xdaf741ecU, 0x500e7fcdU, 0xf62f1791U,
-    0xd68d764dU, 0xb04d43efU, 0x4d54ccaaU, 0x04dfe496U,
-    0xb5e39ed1U, 0x881b4c6aU, 0x1fb8c12cU, 0x517f4665U,
-    0xea049d5eU, 0x355d018cU, 0x7473fa87U, 0x412efb0bU,
-    0x1d5ab367U, 0xd25292dbU, 0x5633e910U, 0x47136dd6U,
-    0x618c9ad7U, 0x0c7a37a1U, 0x148e59f8U, 0x3c89eb13U,
-    0x27eecea9U, 0xc935b761U, 0xe5ede11cU, 0xb13c7a47U,
-    0xdf599cd2U, 0x733f55f2U, 0xce791814U, 0x37bf73c7U,
-    0xcdea53f7U, 0xaa5b5ffdU, 0x6f14df3dU, 0xdb867844U,
-    0xf381caafU, 0xc43eb968U, 0x342c3824U, 0x405fc2a3U,
-    0xc372161dU, 0x250cbce2U, 0x498b283cU, 0x9541ff0dU,
-    0x017139a8U, 0xb3de080cU, 0xe49cd8b4U, 0xc1906456U,
-    0x84617bcbU, 0xb670d532U, 0x5c74486cU, 0x5742d0b8U,
-};
-static const u32 Td3[256] = {
-    0xf4a75051U, 0x4165537eU, 0x17a4c31aU, 0x275e963aU,
-    0xab6bcb3bU, 0x9d45f11fU, 0xfa58abacU, 0xe303934bU,
-    0x30fa5520U, 0x766df6adU, 0xcc769188U, 0x024c25f5U,
-    0xe5d7fc4fU, 0x2acbd7c5U, 0x35448026U, 0x62a38fb5U,
-    0xb15a49deU, 0xba1b6725U, 0xea0e9845U, 0xfec0e15dU,
-    0x2f7502c3U, 0x4cf01281U, 0x4697a38dU, 0xd3f9c66bU,
-    0x8f5fe703U, 0x929c9515U, 0x6d7aebbfU, 0x5259da95U,
-    0xbe832dd4U, 0x7421d358U, 0xe0692949U, 0xc9c8448eU,
-    0xc2896a75U, 0x8e7978f4U, 0x583e6b99U, 0xb971dd27U,
-    0xe14fb6beU, 0x88ad17f0U, 0x20ac66c9U, 0xce3ab47dU,
-    0xdf4a1863U, 0x1a3182e5U, 0x51336097U, 0x537f4562U,
-    0x6477e0b1U, 0x6bae84bbU, 0x81a01cfeU, 0x082b94f9U,
-    0x48685870U, 0x45fd198fU, 0xde6c8794U, 0x7bf8b752U,
-    0x73d323abU, 0x4b02e272U, 0x1f8f57e3U, 0x55ab2a66U,
-    0xeb2807b2U, 0xb5c2032fU, 0xc57b9a86U, 0x3708a5d3U,
-    0x2887f230U, 0xbfa5b223U, 0x036aba02U, 0x16825cedU,
-    0xcf1c2b8aU, 0x79b492a7U, 0x07f2f0f3U, 0x69e2a14eU,
-    0xdaf4cd65U, 0x05bed506U, 0x34621fd1U, 0xa6fe8ac4U,
-    0x2e539d34U, 0xf355a0a2U, 0x8ae13205U, 0xf6eb75a4U,
-    0x83ec390bU, 0x60efaa40U, 0x719f065eU, 0x6e1051bdU,
-    0x218af93eU, 0xdd063d96U, 0x3e05aeddU, 0xe6bd464dU,
-    0x548db591U, 0xc45d0571U, 0x06d46f04U, 0x5015ff60U,
-    0x98fb2419U, 0xbde997d6U, 0x4043cc89U, 0xd99e7767U,
-    0xe842bdb0U, 0x898b8807U, 0x195b38e7U, 0xc8eedb79U,
-    0x7c0a47a1U, 0x420fe97cU, 0x841ec9f8U, 0x00000000U,
-    0x80868309U, 0x2bed4832U, 0x1170ac1eU, 0x5a724e6cU,
-    0x0efffbfdU, 0x8538560fU, 0xaed51e3dU, 0x2d392736U,
-    0x0fd9640aU, 0x5ca62168U, 0x5b54d19bU, 0x362e3a24U,
-    0x0a67b10cU, 0x57e70f93U, 0xee96d2b4U, 0x9b919e1bU,
-    0xc0c54f80U, 0xdc20a261U, 0x774b695aU, 0x121a161cU,
-    0x93ba0ae2U, 0xa02ae5c0U, 0x22e0433cU, 0x1b171d12U,
-    0x090d0b0eU, 0x8bc7adf2U, 0xb6a8b92dU, 0x1ea9c814U,
-    0xf1198557U, 0x75074cafU, 0x99ddbbeeU, 0x7f60fda3U,
-    0x01269ff7U, 0x72f5bc5cU, 0x663bc544U, 0xfb7e345bU,
-    0x4329768bU, 0x23c6dccbU, 0xedfc68b6U, 0xe4f163b8U,
-    0x31dccad7U, 0x63851042U, 0x97224013U, 0xc6112084U,
-    0x4a247d85U, 0xbb3df8d2U, 0xf93211aeU, 0x29a16dc7U,
-    0x9e2f4b1dU, 0xb230f3dcU, 0x8652ec0dU, 0xc1e3d077U,
-    0xb3166c2bU, 0x70b999a9U, 0x9448fa11U, 0xe9642247U,
-    0xfc8cc4a8U, 0xf03f1aa0U, 0x7d2cd856U, 0x3390ef22U,
-    0x494ec787U, 0x38d1c1d9U, 0xcaa2fe8cU, 0xd40b3698U,
-    0xf581cfa6U, 0x7ade28a5U, 0xb78e26daU, 0xadbfa43fU,
-    0x3a9de42cU, 0x78920d50U, 0x5fcc9b6aU, 0x7e466254U,
-    0x8d13c2f6U, 0xd8b8e890U, 0x39f75e2eU, 0xc3aff582U,
-    0x5d80be9fU, 0xd0937c69U, 0xd52da96fU, 0x2512b3cfU,
-    0xac993bc8U, 0x187da710U, 0x9c636ee8U, 0x3bbb7bdbU,
-    0x267809cdU, 0x5918f46eU, 0x9ab701ecU, 0x4f9aa883U,
-    0x956e65e6U, 0xffe67eaaU, 0xbccf0821U, 0x15e8e6efU,
-    0xe79bd9baU, 0x6f36ce4aU, 0x9f09d4eaU, 0xb07cd629U,
-    0xa4b2af31U, 0x3f23312aU, 0xa59430c6U, 0xa266c035U,
-    0x4ebc3774U, 0x82caa6fcU, 0x90d0b0e0U, 0xa7d81533U,
-    0x04984af1U, 0xecdaf741U, 0xcd500e7fU, 0x91f62f17U,
-    0x4dd68d76U, 0xefb04d43U, 0xaa4d54ccU, 0x9604dfe4U,
-    0xd1b5e39eU, 0x6a881b4cU, 0x2c1fb8c1U, 0x65517f46U,
-    0x5eea049dU, 0x8c355d01U, 0x877473faU, 0x0b412efbU,
-    0x671d5ab3U, 0xdbd25292U, 0x105633e9U, 0xd647136dU,
-    0xd7618c9aU, 0xa10c7a37U, 0xf8148e59U, 0x133c89ebU,
-    0xa927eeceU, 0x61c935b7U, 0x1ce5ede1U, 0x47b13c7aU,
-    0xd2df599cU, 0xf2733f55U, 0x14ce7918U, 0xc737bf73U,
-    0xf7cdea53U, 0xfdaa5b5fU, 0x3d6f14dfU, 0x44db8678U,
-    0xaff381caU, 0x68c43eb9U, 0x24342c38U, 0xa3405fc2U,
-    0x1dc37216U, 0xe2250cbcU, 0x3c498b28U, 0x0d9541ffU,
-    0xa8017139U, 0x0cb3de08U, 0xb4e49cd8U, 0x56c19064U,
-    0xcb84617bU, 0x32b670d5U, 0x6c5c7448U, 0xb85742d0U,
-};
-static const u8 Td4[256] = {
-    0x52U, 0x09U, 0x6aU, 0xd5U, 0x30U, 0x36U, 0xa5U, 0x38U,
-    0xbfU, 0x40U, 0xa3U, 0x9eU, 0x81U, 0xf3U, 0xd7U, 0xfbU,
-    0x7cU, 0xe3U, 0x39U, 0x82U, 0x9bU, 0x2fU, 0xffU, 0x87U,
-    0x34U, 0x8eU, 0x43U, 0x44U, 0xc4U, 0xdeU, 0xe9U, 0xcbU,
-    0x54U, 0x7bU, 0x94U, 0x32U, 0xa6U, 0xc2U, 0x23U, 0x3dU,
-    0xeeU, 0x4cU, 0x95U, 0x0bU, 0x42U, 0xfaU, 0xc3U, 0x4eU,
-    0x08U, 0x2eU, 0xa1U, 0x66U, 0x28U, 0xd9U, 0x24U, 0xb2U,
-    0x76U, 0x5bU, 0xa2U, 0x49U, 0x6dU, 0x8bU, 0xd1U, 0x25U,
-    0x72U, 0xf8U, 0xf6U, 0x64U, 0x86U, 0x68U, 0x98U, 0x16U,
-    0xd4U, 0xa4U, 0x5cU, 0xccU, 0x5dU, 0x65U, 0xb6U, 0x92U,
-    0x6cU, 0x70U, 0x48U, 0x50U, 0xfdU, 0xedU, 0xb9U, 0xdaU,
-    0x5eU, 0x15U, 0x46U, 0x57U, 0xa7U, 0x8dU, 0x9dU, 0x84U,
-    0x90U, 0xd8U, 0xabU, 0x00U, 0x8cU, 0xbcU, 0xd3U, 0x0aU,
-    0xf7U, 0xe4U, 0x58U, 0x05U, 0xb8U, 0xb3U, 0x45U, 0x06U,
-    0xd0U, 0x2cU, 0x1eU, 0x8fU, 0xcaU, 0x3fU, 0x0fU, 0x02U,
-    0xc1U, 0xafU, 0xbdU, 0x03U, 0x01U, 0x13U, 0x8aU, 0x6bU,
-    0x3aU, 0x91U, 0x11U, 0x41U, 0x4fU, 0x67U, 0xdcU, 0xeaU,
-    0x97U, 0xf2U, 0xcfU, 0xceU, 0xf0U, 0xb4U, 0xe6U, 0x73U,
-    0x96U, 0xacU, 0x74U, 0x22U, 0xe7U, 0xadU, 0x35U, 0x85U,
-    0xe2U, 0xf9U, 0x37U, 0xe8U, 0x1cU, 0x75U, 0xdfU, 0x6eU,
-    0x47U, 0xf1U, 0x1aU, 0x71U, 0x1dU, 0x29U, 0xc5U, 0x89U,
-    0x6fU, 0xb7U, 0x62U, 0x0eU, 0xaaU, 0x18U, 0xbeU, 0x1bU,
-    0xfcU, 0x56U, 0x3eU, 0x4bU, 0xc6U, 0xd2U, 0x79U, 0x20U,
-    0x9aU, 0xdbU, 0xc0U, 0xfeU, 0x78U, 0xcdU, 0x5aU, 0xf4U,
-    0x1fU, 0xddU, 0xa8U, 0x33U, 0x88U, 0x07U, 0xc7U, 0x31U,
-    0xb1U, 0x12U, 0x10U, 0x59U, 0x27U, 0x80U, 0xecU, 0x5fU,
-    0x60U, 0x51U, 0x7fU, 0xa9U, 0x19U, 0xb5U, 0x4aU, 0x0dU,
-    0x2dU, 0xe5U, 0x7aU, 0x9fU, 0x93U, 0xc9U, 0x9cU, 0xefU,
-    0xa0U, 0xe0U, 0x3bU, 0x4dU, 0xaeU, 0x2aU, 0xf5U, 0xb0U,
-    0xc8U, 0xebU, 0xbbU, 0x3cU, 0x83U, 0x53U, 0x99U, 0x61U,
-    0x17U, 0x2bU, 0x04U, 0x7eU, 0xbaU, 0x77U, 0xd6U, 0x26U,
-    0xe1U, 0x69U, 0x14U, 0x63U, 0x55U, 0x21U, 0x0cU, 0x7dU,
-};
-static const u32 rcon[] = {
-	0x01000000, 0x02000000, 0x04000000, 0x08000000,
-	0x10000000, 0x20000000, 0x40000000, 0x80000000,
-	0x1B000000, 0x36000000, /* for 128-bit blocks, Rijndael never uses more than 10 rcon values */
-};
-
-/**
- * Expand the cipher key into the encryption key schedule.
- */
-int AES_set_encrypt_key(const unsigned char *userKey, const int bits,
-			AES_KEY *key) {
-
-	u32 *rk;
-   	int i = 0;
-	u32 temp;
-
-	if (!userKey || !key)
-		return -1;
-	if (bits != 128 && bits != 192 && bits != 256)
-		return -2;
-
-	rk = key->rd_key;
-
-	if (bits==128)
-		key->rounds = 10;
-	else if (bits==192)
-		key->rounds = 12;
-	else
-		key->rounds = 14;
-
-	rk[0] = GETU32(userKey     );
-	rk[1] = GETU32(userKey +  4);
-	rk[2] = GETU32(userKey +  8);
-	rk[3] = GETU32(userKey + 12);
-	if (bits == 128) {
-		while (1) {
-			temp  = rk[3];
-			rk[4] = rk[0] ^
-				(Te2[(temp >> 16) & 0xff] & 0xff000000) ^
-				(Te3[(temp >>  8) & 0xff] & 0x00ff0000) ^
-				(Te0[(temp      ) & 0xff] & 0x0000ff00) ^
-				(Te1[(temp >> 24)       ] & 0x000000ff) ^
-				rcon[i];
-			rk[5] = rk[1] ^ rk[4];
-			rk[6] = rk[2] ^ rk[5];
-			rk[7] = rk[3] ^ rk[6];
-			if (++i == 10) {
-				return 0;
-			}
-			rk += 4;
-		}
-	}
-	rk[4] = GETU32(userKey + 16);
-	rk[5] = GETU32(userKey + 20);
-	if (bits == 192) {
-		while (1) {
-			temp = rk[ 5];
-			rk[ 6] = rk[ 0] ^
-				(Te2[(temp >> 16) & 0xff] & 0xff000000) ^
-				(Te3[(temp >>  8) & 0xff] & 0x00ff0000) ^
-				(Te0[(temp      ) & 0xff] & 0x0000ff00) ^
-				(Te1[(temp >> 24)       ] & 0x000000ff) ^
-				rcon[i];
-			rk[ 7] = rk[ 1] ^ rk[ 6];
-			rk[ 8] = rk[ 2] ^ rk[ 7];
-			rk[ 9] = rk[ 3] ^ rk[ 8];
-			if (++i == 8) {
-				return 0;
-			}
-			rk[10] = rk[ 4] ^ rk[ 9];
-			rk[11] = rk[ 5] ^ rk[10];
-			rk += 6;
-		}
-	}
-	rk[6] = GETU32(userKey + 24);
-	rk[7] = GETU32(userKey + 28);
-	if (bits == 256) {
-		while (1) {
-			temp = rk[ 7];
-			rk[ 8] = rk[ 0] ^
-				(Te2[(temp >> 16) & 0xff] & 0xff000000) ^
-				(Te3[(temp >>  8) & 0xff] & 0x00ff0000) ^
-				(Te0[(temp      ) & 0xff] & 0x0000ff00) ^
-				(Te1[(temp >> 24)       ] & 0x000000ff) ^
-				rcon[i];
-			rk[ 9] = rk[ 1] ^ rk[ 8];
-			rk[10] = rk[ 2] ^ rk[ 9];
-			rk[11] = rk[ 3] ^ rk[10];
-			if (++i == 7) {
-				return 0;
-			}
-			temp = rk[11];
-			rk[12] = rk[ 4] ^
-				(Te2[(temp >> 24)       ] & 0xff000000) ^
-				(Te3[(temp >> 16) & 0xff] & 0x00ff0000) ^
-				(Te0[(temp >>  8) & 0xff] & 0x0000ff00) ^
-				(Te1[(temp      ) & 0xff] & 0x000000ff);
-			rk[13] = rk[ 5] ^ rk[12];
-			rk[14] = rk[ 6] ^ rk[13];
-			rk[15] = rk[ 7] ^ rk[14];
-
-			rk += 8;
-        	}
-	}
-	return 0;
-}
-
-/**
- * Expand the cipher key into the decryption key schedule.
- */
-int AES_set_decrypt_key(const unsigned char *userKey, const int bits,
-			 AES_KEY *key) {
-
-        u32 *rk;
-	int i, j, status;
-	u32 temp;
-
-	/* first, start with an encryption schedule */
-	status = AES_set_encrypt_key(userKey, bits, key);
-	if (status < 0)
-		return status;
-
-	rk = key->rd_key;
-
-	/* invert the order of the round keys: */
-	for (i = 0, j = 4*(key->rounds); i < j; i += 4, j -= 4) {
-		temp = rk[i    ]; rk[i    ] = rk[j    ]; rk[j    ] = temp;
-		temp = rk[i + 1]; rk[i + 1] = rk[j + 1]; rk[j + 1] = temp;
-		temp = rk[i + 2]; rk[i + 2] = rk[j + 2]; rk[j + 2] = temp;
-		temp = rk[i + 3]; rk[i + 3] = rk[j + 3]; rk[j + 3] = temp;
-	}
-	/* apply the inverse MixColumn transform to all round keys but the first and the last: */
-	for (i = 1; i < (key->rounds); i++) {
-		rk += 4;
-		rk[0] =
-			Td0[Te1[(rk[0] >> 24)       ] & 0xff] ^
-			Td1[Te1[(rk[0] >> 16) & 0xff] & 0xff] ^
-			Td2[Te1[(rk[0] >>  8) & 0xff] & 0xff] ^
-			Td3[Te1[(rk[0]      ) & 0xff] & 0xff];
-		rk[1] =
-			Td0[Te1[(rk[1] >> 24)       ] & 0xff] ^
-			Td1[Te1[(rk[1] >> 16) & 0xff] & 0xff] ^
-			Td2[Te1[(rk[1] >>  8) & 0xff] & 0xff] ^
-			Td3[Te1[(rk[1]      ) & 0xff] & 0xff];
-		rk[2] =
-			Td0[Te1[(rk[2] >> 24)       ] & 0xff] ^
-			Td1[Te1[(rk[2] >> 16) & 0xff] & 0xff] ^
-			Td2[Te1[(rk[2] >>  8) & 0xff] & 0xff] ^
-			Td3[Te1[(rk[2]      ) & 0xff] & 0xff];
-		rk[3] =
-			Td0[Te1[(rk[3] >> 24)       ] & 0xff] ^
-			Td1[Te1[(rk[3] >> 16) & 0xff] & 0xff] ^
-			Td2[Te1[(rk[3] >>  8) & 0xff] & 0xff] ^
-			Td3[Te1[(rk[3]      ) & 0xff] & 0xff];
-	}
-	return 0;
-}
-
-#ifndef AES_ASM
-/*
- * Encrypt a single block
- * in and out can overlap
- */
-void AES_encrypt(const unsigned char *in, unsigned char *out,
-		 const AES_KEY *key) {
-
-	const u32 *rk;
-	u32 s0, s1, s2, s3, t0, t1, t2, t3;
-#ifndef FULL_UNROLL
-	int r;
-#endif /* ?FULL_UNROLL */
-
-	assert(in && out && key);
-	rk = key->rd_key;
-
-	/*
-	 * map byte array block to cipher state
-	 * and add initial round key:
-	 */
-	s0 = GETU32(in     ) ^ rk[0];
-	s1 = GETU32(in +  4) ^ rk[1];
-	s2 = GETU32(in +  8) ^ rk[2];
-	s3 = GETU32(in + 12) ^ rk[3];
-#ifdef FULL_UNROLL
-	/* round 1: */
-   	t0 = Te0[s0 >> 24] ^ Te1[(s1 >> 16) & 0xff] ^ Te2[(s2 >>  8) & 0xff] ^ Te3[s3 & 0xff] ^ rk[ 4];
-   	t1 = Te0[s1 >> 24] ^ Te1[(s2 >> 16) & 0xff] ^ Te2[(s3 >>  8) & 0xff] ^ Te3[s0 & 0xff] ^ rk[ 5];
-   	t2 = Te0[s2 >> 24] ^ Te1[(s3 >> 16) & 0xff] ^ Te2[(s0 >>  8) & 0xff] ^ Te3[s1 & 0xff] ^ rk[ 6];
-   	t3 = Te0[s3 >> 24] ^ Te1[(s0 >> 16) & 0xff] ^ Te2[(s1 >>  8) & 0xff] ^ Te3[s2 & 0xff] ^ rk[ 7];
-   	/* round 2: */
-   	s0 = Te0[t0 >> 24] ^ Te1[(t1 >> 16) & 0xff] ^ Te2[(t2 >>  8) & 0xff] ^ Te3[t3 & 0xff] ^ rk[ 8];
-   	s1 = Te0[t1 >> 24] ^ Te1[(t2 >> 16) & 0xff] ^ Te2[(t3 >>  8) & 0xff] ^ Te3[t0 & 0xff] ^ rk[ 9];
-   	s2 = Te0[t2 >> 24] ^ Te1[(t3 >> 16) & 0xff] ^ Te2[(t0 >>  8) & 0xff] ^ Te3[t1 & 0xff] ^ rk[10];
-   	s3 = Te0[t3 >> 24] ^ Te1[(t0 >> 16) & 0xff] ^ Te2[(t1 >>  8) & 0xff] ^ Te3[t2 & 0xff] ^ rk[11];
-	/* round 3: */
-   	t0 = Te0[s0 >> 24] ^ Te1[(s1 >> 16) & 0xff] ^ Te2[(s2 >>  8) & 0xff] ^ Te3[s3 & 0xff] ^ rk[12];
-   	t1 = Te0[s1 >> 24] ^ Te1[(s2 >> 16) & 0xff] ^ Te2[(s3 >>  8) & 0xff] ^ Te3[s0 & 0xff] ^ rk[13];
-   	t2 = Te0[s2 >> 24] ^ Te1[(s3 >> 16) & 0xff] ^ Te2[(s0 >>  8) & 0xff] ^ Te3[s1 & 0xff] ^ rk[14];
-   	t3 = Te0[s3 >> 24] ^ Te1[(s0 >> 16) & 0xff] ^ Te2[(s1 >>  8) & 0xff] ^ Te3[s2 & 0xff] ^ rk[15];
-   	/* round 4: */
-   	s0 = Te0[t0 >> 24] ^ Te1[(t1 >> 16) & 0xff] ^ Te2[(t2 >>  8) & 0xff] ^ Te3[t3 & 0xff] ^ rk[16];
-   	s1 = Te0[t1 >> 24] ^ Te1[(t2 >> 16) & 0xff] ^ Te2[(t3 >>  8) & 0xff] ^ Te3[t0 & 0xff] ^ rk[17];
-   	s2 = Te0[t2 >> 24] ^ Te1[(t3 >> 16) & 0xff] ^ Te2[(t0 >>  8) & 0xff] ^ Te3[t1 & 0xff] ^ rk[18];
-   	s3 = Te0[t3 >> 24] ^ Te1[(t0 >> 16) & 0xff] ^ Te2[(t1 >>  8) & 0xff] ^ Te3[t2 & 0xff] ^ rk[19];
-	/* round 5: */
-   	t0 = Te0[s0 >> 24] ^ Te1[(s1 >> 16) & 0xff] ^ Te2[(s2 >>  8) & 0xff] ^ Te3[s3 & 0xff] ^ rk[20];
-   	t1 = Te0[s1 >> 24] ^ Te1[(s2 >> 16) & 0xff] ^ Te2[(s3 >>  8) & 0xff] ^ Te3[s0 & 0xff] ^ rk[21];
-   	t2 = Te0[s2 >> 24] ^ Te1[(s3 >> 16) & 0xff] ^ Te2[(s0 >>  8) & 0xff] ^ Te3[s1 & 0xff] ^ rk[22];
-   	t3 = Te0[s3 >> 24] ^ Te1[(s0 >> 16) & 0xff] ^ Te2[(s1 >>  8) & 0xff] ^ Te3[s2 & 0xff] ^ rk[23];
-   	/* round 6: */
-   	s0 = Te0[t0 >> 24] ^ Te1[(t1 >> 16) & 0xff] ^ Te2[(t2 >>  8) & 0xff] ^ Te3[t3 & 0xff] ^ rk[24];
-   	s1 = Te0[t1 >> 24] ^ Te1[(t2 >> 16) & 0xff] ^ Te2[(t3 >>  8) & 0xff] ^ Te3[t0 & 0xff] ^ rk[25];
-   	s2 = Te0[t2 >> 24] ^ Te1[(t3 >> 16) & 0xff] ^ Te2[(t0 >>  8) & 0xff] ^ Te3[t1 & 0xff] ^ rk[26];
-   	s3 = Te0[t3 >> 24] ^ Te1[(t0 >> 16) & 0xff] ^ Te2[(t1 >>  8) & 0xff] ^ Te3[t2 & 0xff] ^ rk[27];
-	/* round 7: */
-   	t0 = Te0[s0 >> 24] ^ Te1[(s1 >> 16) & 0xff] ^ Te2[(s2 >>  8) & 0xff] ^ Te3[s3 & 0xff] ^ rk[28];
-   	t1 = Te0[s1 >> 24] ^ Te1[(s2 >> 16) & 0xff] ^ Te2[(s3 >>  8) & 0xff] ^ Te3[s0 & 0xff] ^ rk[29];
-   	t2 = Te0[s2 >> 24] ^ Te1[(s3 >> 16) & 0xff] ^ Te2[(s0 >>  8) & 0xff] ^ Te3[s1 & 0xff] ^ rk[30];
-   	t3 = Te0[s3 >> 24] ^ Te1[(s0 >> 16) & 0xff] ^ Te2[(s1 >>  8) & 0xff] ^ Te3[s2 & 0xff] ^ rk[31];
-   	/* round 8: */
-   	s0 = Te0[t0 >> 24] ^ Te1[(t1 >> 16) & 0xff] ^ Te2[(t2 >>  8) & 0xff] ^ Te3[t3 & 0xff] ^ rk[32];
-   	s1 = Te0[t1 >> 24] ^ Te1[(t2 >> 16) & 0xff] ^ Te2[(t3 >>  8) & 0xff] ^ Te3[t0 & 0xff] ^ rk[33];
-   	s2 = Te0[t2 >> 24] ^ Te1[(t3 >> 16) & 0xff] ^ Te2[(t0 >>  8) & 0xff] ^ Te3[t1 & 0xff] ^ rk[34];
-   	s3 = Te0[t3 >> 24] ^ Te1[(t0 >> 16) & 0xff] ^ Te2[(t1 >>  8) & 0xff] ^ Te3[t2 & 0xff] ^ rk[35];
-	/* round 9: */
-   	t0 = Te0[s0 >> 24] ^ Te1[(s1 >> 16) & 0xff] ^ Te2[(s2 >>  8) & 0xff] ^ Te3[s3 & 0xff] ^ rk[36];
-   	t1 = Te0[s1 >> 24] ^ Te1[(s2 >> 16) & 0xff] ^ Te2[(s3 >>  8) & 0xff] ^ Te3[s0 & 0xff] ^ rk[37];
-   	t2 = Te0[s2 >> 24] ^ Te1[(s3 >> 16) & 0xff] ^ Te2[(s0 >>  8) & 0xff] ^ Te3[s1 & 0xff] ^ rk[38];
-   	t3 = Te0[s3 >> 24] ^ Te1[(s0 >> 16) & 0xff] ^ Te2[(s1 >>  8) & 0xff] ^ Te3[s2 & 0xff] ^ rk[39];
-    if (key->rounds > 10) {
-        /* round 10: */
-        s0 = Te0[t0 >> 24] ^ Te1[(t1 >> 16) & 0xff] ^ Te2[(t2 >>  8) & 0xff] ^ Te3[t3 & 0xff] ^ rk[40];
-        s1 = Te0[t1 >> 24] ^ Te1[(t2 >> 16) & 0xff] ^ Te2[(t3 >>  8) & 0xff] ^ Te3[t0 & 0xff] ^ rk[41];
-        s2 = Te0[t2 >> 24] ^ Te1[(t3 >> 16) & 0xff] ^ Te2[(t0 >>  8) & 0xff] ^ Te3[t1 & 0xff] ^ rk[42];
-        s3 = Te0[t3 >> 24] ^ Te1[(t0 >> 16) & 0xff] ^ Te2[(t1 >>  8) & 0xff] ^ Te3[t2 & 0xff] ^ rk[43];
-        /* round 11: */
-        t0 = Te0[s0 >> 24] ^ Te1[(s1 >> 16) & 0xff] ^ Te2[(s2 >>  8) & 0xff] ^ Te3[s3 & 0xff] ^ rk[44];
-        t1 = Te0[s1 >> 24] ^ Te1[(s2 >> 16) & 0xff] ^ Te2[(s3 >>  8) & 0xff] ^ Te3[s0 & 0xff] ^ rk[45];
-        t2 = Te0[s2 >> 24] ^ Te1[(s3 >> 16) & 0xff] ^ Te2[(s0 >>  8) & 0xff] ^ Te3[s1 & 0xff] ^ rk[46];
-        t3 = Te0[s3 >> 24] ^ Te1[(s0 >> 16) & 0xff] ^ Te2[(s1 >>  8) & 0xff] ^ Te3[s2 & 0xff] ^ rk[47];
-        if (key->rounds > 12) {
-            /* round 12: */
-            s0 = Te0[t0 >> 24] ^ Te1[(t1 >> 16) & 0xff] ^ Te2[(t2 >>  8) & 0xff] ^ Te3[t3 & 0xff] ^ rk[48];
-            s1 = Te0[t1 >> 24] ^ Te1[(t2 >> 16) & 0xff] ^ Te2[(t3 >>  8) & 0xff] ^ Te3[t0 & 0xff] ^ rk[49];
-            s2 = Te0[t2 >> 24] ^ Te1[(t3 >> 16) & 0xff] ^ Te2[(t0 >>  8) & 0xff] ^ Te3[t1 & 0xff] ^ rk[50];
-            s3 = Te0[t3 >> 24] ^ Te1[(t0 >> 16) & 0xff] ^ Te2[(t1 >>  8) & 0xff] ^ Te3[t2 & 0xff] ^ rk[51];
-            /* round 13: */
-            t0 = Te0[s0 >> 24] ^ Te1[(s1 >> 16) & 0xff] ^ Te2[(s2 >>  8) & 0xff] ^ Te3[s3 & 0xff] ^ rk[52];
-            t1 = Te0[s1 >> 24] ^ Te1[(s2 >> 16) & 0xff] ^ Te2[(s3 >>  8) & 0xff] ^ Te3[s0 & 0xff] ^ rk[53];
-            t2 = Te0[s2 >> 24] ^ Te1[(s3 >> 16) & 0xff] ^ Te2[(s0 >>  8) & 0xff] ^ Te3[s1 & 0xff] ^ rk[54];
-            t3 = Te0[s3 >> 24] ^ Te1[(s0 >> 16) & 0xff] ^ Te2[(s1 >>  8) & 0xff] ^ Te3[s2 & 0xff] ^ rk[55];
-        }
-    }
-    rk += key->rounds << 2;
-#else  /* !FULL_UNROLL */
-    /*
-     * Nr - 1 full rounds:
-     */
-    r = key->rounds >> 1;
-    for (;;) {
-        t0 =
-            Te0[(s0 >> 24)       ] ^
-            Te1[(s1 >> 16) & 0xff] ^
-            Te2[(s2 >>  8) & 0xff] ^
-            Te3[(s3      ) & 0xff] ^
-            rk[4];
-        t1 =
-            Te0[(s1 >> 24)       ] ^
-            Te1[(s2 >> 16) & 0xff] ^
-            Te2[(s3 >>  8) & 0xff] ^
-            Te3[(s0      ) & 0xff] ^
-            rk[5];
-        t2 =
-            Te0[(s2 >> 24)       ] ^
-            Te1[(s3 >> 16) & 0xff] ^
-            Te2[(s0 >>  8) & 0xff] ^
-            Te3[(s1      ) & 0xff] ^
-            rk[6];
-        t3 =
-            Te0[(s3 >> 24)       ] ^
-            Te1[(s0 >> 16) & 0xff] ^
-            Te2[(s1 >>  8) & 0xff] ^
-            Te3[(s2      ) & 0xff] ^
-            rk[7];
-
-        rk += 8;
-        if (--r == 0) {
-            break;
-        }
-
-        s0 =
-            Te0[(t0 >> 24)       ] ^
-            Te1[(t1 >> 16) & 0xff] ^
-            Te2[(t2 >>  8) & 0xff] ^
-            Te3[(t3      ) & 0xff] ^
-            rk[0];
-        s1 =
-            Te0[(t1 >> 24)       ] ^
-            Te1[(t2 >> 16) & 0xff] ^
-            Te2[(t3 >>  8) & 0xff] ^
-            Te3[(t0      ) & 0xff] ^
-            rk[1];
-        s2 =
-            Te0[(t2 >> 24)       ] ^
-            Te1[(t3 >> 16) & 0xff] ^
-            Te2[(t0 >>  8) & 0xff] ^
-            Te3[(t1      ) & 0xff] ^
-            rk[2];
-        s3 =
-            Te0[(t3 >> 24)       ] ^
-            Te1[(t0 >> 16) & 0xff] ^
-            Te2[(t1 >>  8) & 0xff] ^
-            Te3[(t2      ) & 0xff] ^
-            rk[3];
-    }
-#endif /* ?FULL_UNROLL */
-    /*
-	 * apply last round and
-	 * map cipher state to byte array block:
-	 */
-	s0 =
-		(Te2[(t0 >> 24)       ] & 0xff000000) ^
-		(Te3[(t1 >> 16) & 0xff] & 0x00ff0000) ^
-		(Te0[(t2 >>  8) & 0xff] & 0x0000ff00) ^
-		(Te1[(t3      ) & 0xff] & 0x000000ff) ^
-		rk[0];
-	PUTU32(out     , s0);
-	s1 =
-		(Te2[(t1 >> 24)       ] & 0xff000000) ^
-		(Te3[(t2 >> 16) & 0xff] & 0x00ff0000) ^
-		(Te0[(t3 >>  8) & 0xff] & 0x0000ff00) ^
-		(Te1[(t0      ) & 0xff] & 0x000000ff) ^
-		rk[1];
-	PUTU32(out +  4, s1);
-	s2 =
-		(Te2[(t2 >> 24)       ] & 0xff000000) ^
-		(Te3[(t3 >> 16) & 0xff] & 0x00ff0000) ^
-		(Te0[(t0 >>  8) & 0xff] & 0x0000ff00) ^
-		(Te1[(t1      ) & 0xff] & 0x000000ff) ^
-		rk[2];
-	PUTU32(out +  8, s2);
-	s3 =
-		(Te2[(t3 >> 24)       ] & 0xff000000) ^
-		(Te3[(t0 >> 16) & 0xff] & 0x00ff0000) ^
-		(Te0[(t1 >>  8) & 0xff] & 0x0000ff00) ^
-		(Te1[(t2      ) & 0xff] & 0x000000ff) ^
-		rk[3];
-	PUTU32(out + 12, s3);
-}
-
-/*
- * Decrypt a single block
- * in and out can overlap
- */
-void AES_decrypt(const unsigned char *in, unsigned char *out,
-		 const AES_KEY *key) {
-
-	const u32 *rk;
-	u32 s0, s1, s2, s3, t0, t1, t2, t3;
-#ifndef FULL_UNROLL
-	int r;
-#endif /* ?FULL_UNROLL */
-
-	assert(in && out && key);
-	rk = key->rd_key;
-
-	/*
-	 * map byte array block to cipher state
-	 * and add initial round key:
-	 */
-    s0 = GETU32(in     ) ^ rk[0];
-    s1 = GETU32(in +  4) ^ rk[1];
-    s2 = GETU32(in +  8) ^ rk[2];
-    s3 = GETU32(in + 12) ^ rk[3];
-#ifdef FULL_UNROLL
-    /* round 1: */
-    t0 = Td0[s0 >> 24] ^ Td1[(s3 >> 16) & 0xff] ^ Td2[(s2 >>  8) & 0xff] ^ Td3[s1 & 0xff] ^ rk[ 4];
-    t1 = Td0[s1 >> 24] ^ Td1[(s0 >> 16) & 0xff] ^ Td2[(s3 >>  8) & 0xff] ^ Td3[s2 & 0xff] ^ rk[ 5];
-    t2 = Td0[s2 >> 24] ^ Td1[(s1 >> 16) & 0xff] ^ Td2[(s0 >>  8) & 0xff] ^ Td3[s3 & 0xff] ^ rk[ 6];
-    t3 = Td0[s3 >> 24] ^ Td1[(s2 >> 16) & 0xff] ^ Td2[(s1 >>  8) & 0xff] ^ Td3[s0 & 0xff] ^ rk[ 7];
-    /* round 2: */
-    s0 = Td0[t0 >> 24] ^ Td1[(t3 >> 16) & 0xff] ^ Td2[(t2 >>  8) & 0xff] ^ Td3[t1 & 0xff] ^ rk[ 8];
-    s1 = Td0[t1 >> 24] ^ Td1[(t0 >> 16) & 0xff] ^ Td2[(t3 >>  8) & 0xff] ^ Td3[t2 & 0xff] ^ rk[ 9];
-    s2 = Td0[t2 >> 24] ^ Td1[(t1 >> 16) & 0xff] ^ Td2[(t0 >>  8) & 0xff] ^ Td3[t3 & 0xff] ^ rk[10];
-    s3 = Td0[t3 >> 24] ^ Td1[(t2 >> 16) & 0xff] ^ Td2[(t1 >>  8) & 0xff] ^ Td3[t0 & 0xff] ^ rk[11];
-    /* round 3: */
-    t0 = Td0[s0 >> 24] ^ Td1[(s3 >> 16) & 0xff] ^ Td2[(s2 >>  8) & 0xff] ^ Td3[s1 & 0xff] ^ rk[12];
-    t1 = Td0[s1 >> 24] ^ Td1[(s0 >> 16) & 0xff] ^ Td2[(s3 >>  8) & 0xff] ^ Td3[s2 & 0xff] ^ rk[13];
-    t2 = Td0[s2 >> 24] ^ Td1[(s1 >> 16) & 0xff] ^ Td2[(s0 >>  8) & 0xff] ^ Td3[s3 & 0xff] ^ rk[14];
-    t3 = Td0[s3 >> 24] ^ Td1[(s2 >> 16) & 0xff] ^ Td2[(s1 >>  8) & 0xff] ^ Td3[s0 & 0xff] ^ rk[15];
-    /* round 4: */
-    s0 = Td0[t0 >> 24] ^ Td1[(t3 >> 16) & 0xff] ^ Td2[(t2 >>  8) & 0xff] ^ Td3[t1 & 0xff] ^ rk[16];
-    s1 = Td0[t1 >> 24] ^ Td1[(t0 >> 16) & 0xff] ^ Td2[(t3 >>  8) & 0xff] ^ Td3[t2 & 0xff] ^ rk[17];
-    s2 = Td0[t2 >> 24] ^ Td1[(t1 >> 16) & 0xff] ^ Td2[(t0 >>  8) & 0xff] ^ Td3[t3 & 0xff] ^ rk[18];
-    s3 = Td0[t3 >> 24] ^ Td1[(t2 >> 16) & 0xff] ^ Td2[(t1 >>  8) & 0xff] ^ Td3[t0 & 0xff] ^ rk[19];
-    /* round 5: */
-    t0 = Td0[s0 >> 24] ^ Td1[(s3 >> 16) & 0xff] ^ Td2[(s2 >>  8) & 0xff] ^ Td3[s1 & 0xff] ^ rk[20];
-    t1 = Td0[s1 >> 24] ^ Td1[(s0 >> 16) & 0xff] ^ Td2[(s3 >>  8) & 0xff] ^ Td3[s2 & 0xff] ^ rk[21];
-    t2 = Td0[s2 >> 24] ^ Td1[(s1 >> 16) & 0xff] ^ Td2[(s0 >>  8) & 0xff] ^ Td3[s3 & 0xff] ^ rk[22];
-    t3 = Td0[s3 >> 24] ^ Td1[(s2 >> 16) & 0xff] ^ Td2[(s1 >>  8) & 0xff] ^ Td3[s0 & 0xff] ^ rk[23];
-    /* round 6: */
-    s0 = Td0[t0 >> 24] ^ Td1[(t3 >> 16) & 0xff] ^ Td2[(t2 >>  8) & 0xff] ^ Td3[t1 & 0xff] ^ rk[24];
-    s1 = Td0[t1 >> 24] ^ Td1[(t0 >> 16) & 0xff] ^ Td2[(t3 >>  8) & 0xff] ^ Td3[t2 & 0xff] ^ rk[25];
-    s2 = Td0[t2 >> 24] ^ Td1[(t1 >> 16) & 0xff] ^ Td2[(t0 >>  8) & 0xff] ^ Td3[t3 & 0xff] ^ rk[26];
-    s3 = Td0[t3 >> 24] ^ Td1[(t2 >> 16) & 0xff] ^ Td2[(t1 >>  8) & 0xff] ^ Td3[t0 & 0xff] ^ rk[27];
-    /* round 7: */
-    t0 = Td0[s0 >> 24] ^ Td1[(s3 >> 16) & 0xff] ^ Td2[(s2 >>  8) & 0xff] ^ Td3[s1 & 0xff] ^ rk[28];
-    t1 = Td0[s1 >> 24] ^ Td1[(s0 >> 16) & 0xff] ^ Td2[(s3 >>  8) & 0xff] ^ Td3[s2 & 0xff] ^ rk[29];
-    t2 = Td0[s2 >> 24] ^ Td1[(s1 >> 16) & 0xff] ^ Td2[(s0 >>  8) & 0xff] ^ Td3[s3 & 0xff] ^ rk[30];
-    t3 = Td0[s3 >> 24] ^ Td1[(s2 >> 16) & 0xff] ^ Td2[(s1 >>  8) & 0xff] ^ Td3[s0 & 0xff] ^ rk[31];
-    /* round 8: */
-    s0 = Td0[t0 >> 24] ^ Td1[(t3 >> 16) & 0xff] ^ Td2[(t2 >>  8) & 0xff] ^ Td3[t1 & 0xff] ^ rk[32];
-    s1 = Td0[t1 >> 24] ^ Td1[(t0 >> 16) & 0xff] ^ Td2[(t3 >>  8) & 0xff] ^ Td3[t2 & 0xff] ^ rk[33];
-    s2 = Td0[t2 >> 24] ^ Td1[(t1 >> 16) & 0xff] ^ Td2[(t0 >>  8) & 0xff] ^ Td3[t3 & 0xff] ^ rk[34];
-    s3 = Td0[t3 >> 24] ^ Td1[(t2 >> 16) & 0xff] ^ Td2[(t1 >>  8) & 0xff] ^ Td3[t0 & 0xff] ^ rk[35];
-    /* round 9: */
-    t0 = Td0[s0 >> 24] ^ Td1[(s3 >> 16) & 0xff] ^ Td2[(s2 >>  8) & 0xff] ^ Td3[s1 & 0xff] ^ rk[36];
-    t1 = Td0[s1 >> 24] ^ Td1[(s0 >> 16) & 0xff] ^ Td2[(s3 >>  8) & 0xff] ^ Td3[s2 & 0xff] ^ rk[37];
-    t2 = Td0[s2 >> 24] ^ Td1[(s1 >> 16) & 0xff] ^ Td2[(s0 >>  8) & 0xff] ^ Td3[s3 & 0xff] ^ rk[38];
-    t3 = Td0[s3 >> 24] ^ Td1[(s2 >> 16) & 0xff] ^ Td2[(s1 >>  8) & 0xff] ^ Td3[s0 & 0xff] ^ rk[39];
-    if (key->rounds > 10) {
-        /* round 10: */
-        s0 = Td0[t0 >> 24] ^ Td1[(t3 >> 16) & 0xff] ^ Td2[(t2 >>  8) & 0xff] ^ Td3[t1 & 0xff] ^ rk[40];
-        s1 = Td0[t1 >> 24] ^ Td1[(t0 >> 16) & 0xff] ^ Td2[(t3 >>  8) & 0xff] ^ Td3[t2 & 0xff] ^ rk[41];
-        s2 = Td0[t2 >> 24] ^ Td1[(t1 >> 16) & 0xff] ^ Td2[(t0 >>  8) & 0xff] ^ Td3[t3 & 0xff] ^ rk[42];
-        s3 = Td0[t3 >> 24] ^ Td1[(t2 >> 16) & 0xff] ^ Td2[(t1 >>  8) & 0xff] ^ Td3[t0 & 0xff] ^ rk[43];
-        /* round 11: */
-        t0 = Td0[s0 >> 24] ^ Td1[(s3 >> 16) & 0xff] ^ Td2[(s2 >>  8) & 0xff] ^ Td3[s1 & 0xff] ^ rk[44];
-        t1 = Td0[s1 >> 24] ^ Td1[(s0 >> 16) & 0xff] ^ Td2[(s3 >>  8) & 0xff] ^ Td3[s2 & 0xff] ^ rk[45];
-        t2 = Td0[s2 >> 24] ^ Td1[(s1 >> 16) & 0xff] ^ Td2[(s0 >>  8) & 0xff] ^ Td3[s3 & 0xff] ^ rk[46];
-        t3 = Td0[s3 >> 24] ^ Td1[(s2 >> 16) & 0xff] ^ Td2[(s1 >>  8) & 0xff] ^ Td3[s0 & 0xff] ^ rk[47];
-        if (key->rounds > 12) {
-            /* round 12: */
-            s0 = Td0[t0 >> 24] ^ Td1[(t3 >> 16) & 0xff] ^ Td2[(t2 >>  8) & 0xff] ^ Td3[t1 & 0xff] ^ rk[48];
-            s1 = Td0[t1 >> 24] ^ Td1[(t0 >> 16) & 0xff] ^ Td2[(t3 >>  8) & 0xff] ^ Td3[t2 & 0xff] ^ rk[49];
-            s2 = Td0[t2 >> 24] ^ Td1[(t1 >> 16) & 0xff] ^ Td2[(t0 >>  8) & 0xff] ^ Td3[t3 & 0xff] ^ rk[50];
-            s3 = Td0[t3 >> 24] ^ Td1[(t2 >> 16) & 0xff] ^ Td2[(t1 >>  8) & 0xff] ^ Td3[t0 & 0xff] ^ rk[51];
-            /* round 13: */
-            t0 = Td0[s0 >> 24] ^ Td1[(s3 >> 16) & 0xff] ^ Td2[(s2 >>  8) & 0xff] ^ Td3[s1 & 0xff] ^ rk[52];
-            t1 = Td0[s1 >> 24] ^ Td1[(s0 >> 16) & 0xff] ^ Td2[(s3 >>  8) & 0xff] ^ Td3[s2 & 0xff] ^ rk[53];
-            t2 = Td0[s2 >> 24] ^ Td1[(s1 >> 16) & 0xff] ^ Td2[(s0 >>  8) & 0xff] ^ Td3[s3 & 0xff] ^ rk[54];
-            t3 = Td0[s3 >> 24] ^ Td1[(s2 >> 16) & 0xff] ^ Td2[(s1 >>  8) & 0xff] ^ Td3[s0 & 0xff] ^ rk[55];
-        }
-    }
-	rk += key->rounds << 2;
-#else  /* !FULL_UNROLL */
-    /*
-     * Nr - 1 full rounds:
-     */
-    r = key->rounds >> 1;
-    for (;;) {
-        t0 =
-            Td0[(s0 >> 24)       ] ^
-            Td1[(s3 >> 16) & 0xff] ^
-            Td2[(s2 >>  8) & 0xff] ^
-            Td3[(s1      ) & 0xff] ^
-            rk[4];
-        t1 =
-            Td0[(s1 >> 24)       ] ^
-            Td1[(s0 >> 16) & 0xff] ^
-            Td2[(s3 >>  8) & 0xff] ^
-            Td3[(s2      ) & 0xff] ^
-            rk[5];
-        t2 =
-            Td0[(s2 >> 24)       ] ^
-            Td1[(s1 >> 16) & 0xff] ^
-            Td2[(s0 >>  8) & 0xff] ^
-            Td3[(s3      ) & 0xff] ^
-            rk[6];
-        t3 =
-            Td0[(s3 >> 24)       ] ^
-            Td1[(s2 >> 16) & 0xff] ^
-            Td2[(s1 >>  8) & 0xff] ^
-            Td3[(s0      ) & 0xff] ^
-            rk[7];
-
-        rk += 8;
-        if (--r == 0) {
-            break;
-        }
-
-        s0 =
-            Td0[(t0 >> 24)       ] ^
-            Td1[(t3 >> 16) & 0xff] ^
-            Td2[(t2 >>  8) & 0xff] ^
-            Td3[(t1      ) & 0xff] ^
-            rk[0];
-        s1 =
-            Td0[(t1 >> 24)       ] ^
-            Td1[(t0 >> 16) & 0xff] ^
-            Td2[(t3 >>  8) & 0xff] ^
-            Td3[(t2      ) & 0xff] ^
-            rk[1];
-        s2 =
-            Td0[(t2 >> 24)       ] ^
-            Td1[(t1 >> 16) & 0xff] ^
-            Td2[(t0 >>  8) & 0xff] ^
-            Td3[(t3      ) & 0xff] ^
-            rk[2];
-        s3 =
-            Td0[(t3 >> 24)       ] ^
-            Td1[(t2 >> 16) & 0xff] ^
-            Td2[(t1 >>  8) & 0xff] ^
-            Td3[(t0      ) & 0xff] ^
-            rk[3];
-    }
-#endif /* ?FULL_UNROLL */
-    /*
-	 * apply last round and
-	 * map cipher state to byte array block:
-	 */
-   	s0 =
-   		(Td4[(t0 >> 24)       ] << 24) ^
-   		(Td4[(t3 >> 16) & 0xff] << 16) ^
-   		(Td4[(t2 >>  8) & 0xff] <<  8) ^
-   		(Td4[(t1      ) & 0xff])       ^
-   		rk[0];
-	PUTU32(out     , s0);
-   	s1 =
-   		(Td4[(t1 >> 24)       ] << 24) ^
-   		(Td4[(t0 >> 16) & 0xff] << 16) ^
-   		(Td4[(t3 >>  8) & 0xff] <<  8) ^
-   		(Td4[(t2      ) & 0xff])       ^
-   		rk[1];
-	PUTU32(out +  4, s1);
-   	s2 =
-   		(Td4[(t2 >> 24)       ] << 24) ^
-   		(Td4[(t1 >> 16) & 0xff] << 16) ^
-   		(Td4[(t0 >>  8) & 0xff] <<  8) ^
-   		(Td4[(t3      ) & 0xff])       ^
-   		rk[2];
-	PUTU32(out +  8, s2);
-   	s3 =
-   		(Td4[(t3 >> 24)       ] << 24) ^
-   		(Td4[(t2 >> 16) & 0xff] << 16) ^
-   		(Td4[(t1 >>  8) & 0xff] <<  8) ^
-   		(Td4[(t0      ) & 0xff])       ^
-   		rk[3];
-	PUTU32(out + 12, s3);
-}
-
-#endif /* AES_ASM */
diff --git a/crypto/openssl/crypto/aes/aes_ctr.c b/crypto/openssl/crypto/aes/aes_ctr.c
deleted file mode 100644
index f36982be1e26..000000000000
--- a/crypto/openssl/crypto/aes/aes_ctr.c
+++ /dev/null
@@ -1,139 +0,0 @@
-/* crypto/aes/aes_ctr.c -*- mode:C; c-file-style: "eay" -*- */
-/* ====================================================================
- * Copyright (c) 1998-2002 The OpenSSL Project.  All rights reserved.
- *
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions
- * are met:
- *
- * 1. Redistributions of source code must retain the above copyright
- *    notice, this list of conditions and the following disclaimer. 
- *
- * 2. Redistributions in binary form must reproduce the above copyright
- *    notice, this list of conditions and the following disclaimer in
- *    the documentation and/or other materials provided with the
- *    distribution.
- *
- * 3. All advertising materials mentioning features or use of this
- *    software must display the following acknowledgment:
- *    "This product includes software developed by the OpenSSL Project
- *    for use in the OpenSSL Toolkit. (http://www.openssl.org/)"
- *
- * 4. The names "OpenSSL Toolkit" and "OpenSSL Project" must not be used to
- *    endorse or promote products derived from this software without
- *    prior written permission. For written permission, please contact
- *    openssl-core@openssl.org.
- *
- * 5. Products derived from this software may not be called "OpenSSL"
- *    nor may "OpenSSL" appear in their names without prior written
- *    permission of the OpenSSL Project.
- *
- * 6. Redistributions of any form whatsoever must retain the following
- *    acknowledgment:
- *    "This product includes software developed by the OpenSSL Project
- *    for use in the OpenSSL Toolkit (http://www.openssl.org/)"
- *
- * THIS SOFTWARE IS PROVIDED BY THE OpenSSL PROJECT ``AS IS'' AND ANY
- * EXPRESSED OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
- * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR
- * PURPOSE ARE DISCLAIMED.  IN NO EVENT SHALL THE OpenSSL PROJECT OR
- * ITS CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
- * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
- * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
- * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
- * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
- * STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
- * ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED
- * OF THE POSSIBILITY OF SUCH DAMAGE.
- * ====================================================================
- *
- */
-
-#ifndef AES_DEBUG
-# ifndef NDEBUG
-#  define NDEBUG
-# endif
-#endif
-#include <assert.h>
-
-#include <openssl/aes.h>
-#include "aes_locl.h"
-
-/* NOTE: the IV/counter CTR mode is big-endian.  The rest of the AES code
- * is endian-neutral. */
-
-/* increment counter (128-bit int) by 1 */
-static void AES_ctr128_inc(unsigned char *counter) {
-	unsigned long c;
-
-	/* Grab bottom dword of counter and increment */
-	c = GETU32(counter + 12);
-	c++;	c &= 0xFFFFFFFF;
-	PUTU32(counter + 12, c);
-
-	/* if no overflow, we're done */
-	if (c)
-		return;
-
-	/* Grab 1st dword of counter and increment */
-	c = GETU32(counter +  8);
-	c++;	c &= 0xFFFFFFFF;
-	PUTU32(counter +  8, c);
-
-	/* if no overflow, we're done */
-	if (c)
-		return;
-
-	/* Grab 2nd dword of counter and increment */
-	c = GETU32(counter +  4);
-	c++;	c &= 0xFFFFFFFF;
-	PUTU32(counter +  4, c);
-
-	/* if no overflow, we're done */
-	if (c)
-		return;
-
-	/* Grab top dword of counter and increment */
-	c = GETU32(counter +  0);
-	c++;	c &= 0xFFFFFFFF;
-	PUTU32(counter +  0, c);
-}
-
-/* The input encrypted as though 128bit counter mode is being
- * used.  The extra state information to record how much of the
- * 128bit block we have used is contained in *num, and the
- * encrypted counter is kept in ecount_buf.  Both *num and
- * ecount_buf must be initialised with zeros before the first
- * call to AES_ctr128_encrypt().
- *
- * This algorithm assumes that the counter is in the x lower bits
- * of the IV (ivec), and that the application has full control over
- * overflow and the rest of the IV.  This implementation takes NO
- * responsability for checking that the counter doesn't overflow
- * into the rest of the IV when incremented.
- */
-void AES_ctr128_encrypt(const unsigned char *in, unsigned char *out,
-	const unsigned long length, const AES_KEY *key,
-	unsigned char ivec[AES_BLOCK_SIZE],
-	unsigned char ecount_buf[AES_BLOCK_SIZE],
-	unsigned int *num) {
-
-	unsigned int n;
-	unsigned long l=length;
-
-	assert(in && out && key && counter && num);
-	assert(*num < AES_BLOCK_SIZE);
-
-	n = *num;
-
-	while (l--) {
-		if (n == 0) {
-			AES_encrypt(ivec, ecount_buf, key);
- 			AES_ctr128_inc(ivec);
-		}
-		*(out++) = *(in++) ^ ecount_buf[n];
-		n = (n+1) % AES_BLOCK_SIZE;
-	}
-
-	*num=n;
-}
diff --git a/crypto/openssl/crypto/aes/aes_ecb.c b/crypto/openssl/crypto/aes/aes_ecb.c
deleted file mode 100644
index 28aa561c2d89..000000000000
--- a/crypto/openssl/crypto/aes/aes_ecb.c
+++ /dev/null
@@ -1,73 +0,0 @@
-/* crypto/aes/aes_ecb.c -*- mode:C; c-file-style: "eay" -*- */
-/* ====================================================================
- * Copyright (c) 1998-2002 The OpenSSL Project.  All rights reserved.
- *
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions
- * are met:
- *
- * 1. Redistributions of source code must retain the above copyright
- *    notice, this list of conditions and the following disclaimer. 
- *
- * 2. Redistributions in binary form must reproduce the above copyright
- *    notice, this list of conditions and the following disclaimer in
- *    the documentation and/or other materials provided with the
- *    distribution.
- *
- * 3. All advertising materials mentioning features or use of this
- *    software must display the following acknowledgment:
- *    "This product includes software developed by the OpenSSL Project
- *    for use in the OpenSSL Toolkit. (http://www.openssl.org/)"
- *
- * 4. The names "OpenSSL Toolkit" and "OpenSSL Project" must not be used to
- *    endorse or promote products derived from this software without
- *    prior written permission. For written permission, please contact
- *    openssl-core@openssl.org.
- *
- * 5. Products derived from this software may not be called "OpenSSL"
- *    nor may "OpenSSL" appear in their names without prior written
- *    permission of the OpenSSL Project.
- *
- * 6. Redistributions of any form whatsoever must retain the following
- *    acknowledgment:
- *    "This product includes software developed by the OpenSSL Project
- *    for use in the OpenSSL Toolkit (http://www.openssl.org/)"
- *
- * THIS SOFTWARE IS PROVIDED BY THE OpenSSL PROJECT ``AS IS'' AND ANY
- * EXPRESSED OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
- * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR
- * PURPOSE ARE DISCLAIMED.  IN NO EVENT SHALL THE OpenSSL PROJECT OR
- * ITS CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
- * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
- * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
- * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
- * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
- * STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
- * ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED
- * OF THE POSSIBILITY OF SUCH DAMAGE.
- * ====================================================================
- *
- */
-
-#ifndef AES_DEBUG
-# ifndef NDEBUG
-#  define NDEBUG
-# endif
-#endif
-#include <assert.h>
-
-#include <openssl/aes.h>
-#include "aes_locl.h"
-
-void AES_ecb_encrypt(const unsigned char *in, unsigned char *out,
-		     const AES_KEY *key, const int enc) {
-
-        assert(in && out && key);
-	assert((AES_ENCRYPT == enc)||(AES_DECRYPT == enc));
-
-	if (AES_ENCRYPT == enc)
-		AES_encrypt(in, out, key);
-	else
-		AES_decrypt(in, out, key);
-}
-
diff --git a/crypto/openssl/crypto/aes/aes_ige.c b/crypto/openssl/crypto/aes/aes_ige.c
deleted file mode 100644
index 2082d060cf94..000000000000
--- a/crypto/openssl/crypto/aes/aes_ige.c
+++ /dev/null
@@ -1,283 +0,0 @@
-/* crypto/aes/aes_ige.c -*- mode:C; c-file-style: "eay" -*- */
-/* ====================================================================
- * Copyright (c) 2006 The OpenSSL Project.  All rights reserved.
- *
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions
- * are met:
- *
- * 1. Redistributions of source code must retain the above copyright
- *    notice, this list of conditions and the following disclaimer. 
- *
- * 2. Redistributions in binary form must reproduce the above copyright
- *    notice, this list of conditions and the following disclaimer in
- *    the documentation and/or other materials provided with the
- *    distribution.
- *
- * 3. All advertising materials mentioning features or use of this
- *    software must display the following acknowledgment:
- *    "This product includes software developed by the OpenSSL Project
- *    for use in the OpenSSL Toolkit. (http://www.openssl.org/)"
- *
- * 4. The names "OpenSSL Toolkit" and "OpenSSL Project" must not be used to
- *    endorse or promote products derived from this software without
- *    prior written permission. For written permission, please contact
- *    openssl-core@openssl.org.
- *
- * 5. Products derived from this software may not be called "OpenSSL"
- *    nor may "OpenSSL" appear in their names without prior written
- *    permission of the OpenSSL Project.
- *
- * 6. Redistributions of any form whatsoever must retain the following
- *    acknowledgment:
- *    "This product includes software developed by the OpenSSL Project
- *    for use in the OpenSSL Toolkit (http://www.openssl.org/)"
- *
- * THIS SOFTWARE IS PROVIDED BY THE OpenSSL PROJECT ``AS IS'' AND ANY
- * EXPRESSED OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
- * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR
- * PURPOSE ARE DISCLAIMED.  IN NO EVENT SHALL THE OpenSSL PROJECT OR
- * ITS CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
- * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
- * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
- * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
- * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
- * STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
- * ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED
- * OF THE POSSIBILITY OF SUCH DAMAGE.
- * ====================================================================
- *
- */
-
-#include "cryptlib.h"
-
-#include <openssl/aes.h>
-#include "aes_locl.h"
-
-/*
-static void hexdump(FILE *f,const char *title,const unsigned char *s,int l)
-    {
-    int n=0;
-
-    fprintf(f,"%s",title);
-    for( ; n < l ; ++n)
-		{
-		if((n%16) == 0)
-			fprintf(f,"\n%04x",n);
-		fprintf(f," %02x",s[n]);
-		}
-    fprintf(f,"\n");
-    }
-*/
-
-/* N.B. The IV for this mode is _twice_ the block size */
-
-void AES_ige_encrypt(const unsigned char *in, unsigned char *out,
-					 const unsigned long length, const AES_KEY *key,
-					 unsigned char *ivec, const int enc)
-	{
-	unsigned long n;
-	unsigned long len = length;
-	unsigned char tmp[AES_BLOCK_SIZE];
-	unsigned char tmp2[AES_BLOCK_SIZE];
-	unsigned char prev[AES_BLOCK_SIZE];
-	const unsigned char *iv = ivec;
-	const unsigned char *iv2 = ivec + AES_BLOCK_SIZE;
-
-	OPENSSL_assert(in && out && key && ivec);
-	OPENSSL_assert((AES_ENCRYPT == enc)||(AES_DECRYPT == enc));
-	OPENSSL_assert((length%AES_BLOCK_SIZE) == 0);
-
-	if (AES_ENCRYPT == enc)
-		{
-		/* XXX: Do a separate case for when in != out (strictly should
-		   check for overlap, too) */
-		while (len >= AES_BLOCK_SIZE)
-			{
-			/*			hexdump(stdout, "in", in, AES_BLOCK_SIZE); */
-			/*			hexdump(stdout, "iv", iv, AES_BLOCK_SIZE); */
-			for(n=0 ; n < AES_BLOCK_SIZE ; ++n)
-				out[n] = in[n] ^ iv[n];
-			/*			hexdump(stdout, "in ^ iv", out, AES_BLOCK_SIZE); */
-			AES_encrypt(out, out, key);
-			/*			hexdump(stdout,"enc", out, AES_BLOCK_SIZE); */
-			/*			hexdump(stdout,"iv2", iv2, AES_BLOCK_SIZE); */
-			for(n=0 ; n < AES_BLOCK_SIZE ; ++n)
-				out[n] ^= iv2[n];
-			/*			hexdump(stdout,"out", out, AES_BLOCK_SIZE); */
-			iv = out;
-			memcpy(prev, in, AES_BLOCK_SIZE);
-			iv2 = prev;
-			len -= AES_BLOCK_SIZE;
-			in += AES_BLOCK_SIZE;
-			out += AES_BLOCK_SIZE;
-			}
-		memcpy(ivec, iv, AES_BLOCK_SIZE);
-		memcpy(ivec + AES_BLOCK_SIZE, iv2, AES_BLOCK_SIZE);
-		}
-	else
-		{
-		while (len >= AES_BLOCK_SIZE)
-			{
-			memcpy(tmp, in, AES_BLOCK_SIZE);
-			memcpy(tmp2, in, AES_BLOCK_SIZE);
-			/*			hexdump(stdout, "in", in, AES_BLOCK_SIZE); */
-			/*			hexdump(stdout, "iv2", iv2, AES_BLOCK_SIZE); */
-			for(n=0 ; n < AES_BLOCK_SIZE ; ++n)
-				tmp[n] ^= iv2[n];
-			/*			hexdump(stdout, "in ^ iv2", tmp, AES_BLOCK_SIZE); */
-			AES_decrypt(tmp, out, key);
-			/*			hexdump(stdout, "dec", out, AES_BLOCK_SIZE); */
-			/*			hexdump(stdout, "iv", ivec, AES_BLOCK_SIZE); */
-			for(n=0 ; n < AES_BLOCK_SIZE ; ++n)
-				out[n] ^= ivec[n];
-			/*			hexdump(stdout, "out", out, AES_BLOCK_SIZE); */
-			memcpy(ivec, tmp2, AES_BLOCK_SIZE);
-			iv2 = out;
-			len -= AES_BLOCK_SIZE;
-			in += AES_BLOCK_SIZE;
-			out += AES_BLOCK_SIZE;
-			}
-		memcpy(ivec + AES_BLOCK_SIZE, iv2, AES_BLOCK_SIZE);
-		}
-	}
-
-/*
- * Note that its effectively impossible to do biIGE in anything other
- * than a single pass, so no provision is made for chaining.
- */
-
-/* N.B. The IV for this mode is _four times_ the block size */
-
-void AES_bi_ige_encrypt(const unsigned char *in, unsigned char *out,
-						const unsigned long length, const AES_KEY *key,
-						const AES_KEY *key2, const unsigned char *ivec,
-						const int enc)
-	{
-	unsigned long n;
-	unsigned long len = length;
-	unsigned char tmp[AES_BLOCK_SIZE];
-	unsigned char tmp2[AES_BLOCK_SIZE];
-	unsigned char tmp3[AES_BLOCK_SIZE];
-	unsigned char prev[AES_BLOCK_SIZE];
-	const unsigned char *iv;
-	const unsigned char *iv2;
-
-	OPENSSL_assert(in && out && key && ivec);
-	OPENSSL_assert((AES_ENCRYPT == enc)||(AES_DECRYPT == enc));
-	OPENSSL_assert((length%AES_BLOCK_SIZE) == 0);
-
-	if (AES_ENCRYPT == enc)
-		{
-		/* XXX: Do a separate case for when in != out (strictly should
-		   check for overlap, too) */
-
-		/* First the forward pass */ 
-		iv = ivec;
-		iv2 = ivec + AES_BLOCK_SIZE;
-		while (len >= AES_BLOCK_SIZE)
-			{
-			/*			hexdump(stdout, "in", in, AES_BLOCK_SIZE); */
-			/*			hexdump(stdout, "iv", iv, AES_BLOCK_SIZE); */
-			for(n=0 ; n < AES_BLOCK_SIZE ; ++n)
-				out[n] = in[n] ^ iv[n];
-			/*			hexdump(stdout, "in ^ iv", out, AES_BLOCK_SIZE); */
-			AES_encrypt(out, out, key);
-			/*			hexdump(stdout,"enc", out, AES_BLOCK_SIZE); */
-			/*			hexdump(stdout,"iv2", iv2, AES_BLOCK_SIZE); */
-			for(n=0 ; n < AES_BLOCK_SIZE ; ++n)
-				out[n] ^= iv2[n];
-			/*			hexdump(stdout,"out", out, AES_BLOCK_SIZE); */
-			iv = out;
-			memcpy(prev, in, AES_BLOCK_SIZE);
-			iv2 = prev;
-			len -= AES_BLOCK_SIZE;
-			in += AES_BLOCK_SIZE;
-			out += AES_BLOCK_SIZE;
-			}
-
-		/* And now backwards */
-		iv = ivec + AES_BLOCK_SIZE*2;
-		iv2 = ivec + AES_BLOCK_SIZE*3;
-		len = length;
-		while(len >= AES_BLOCK_SIZE)
-			{
-			out -= AES_BLOCK_SIZE;
-			/*			hexdump(stdout, "intermediate", out, AES_BLOCK_SIZE); */
-			/*			hexdump(stdout, "iv", iv, AES_BLOCK_SIZE); */
-			/* XXX: reduce copies by alternating between buffers */
-			memcpy(tmp, out, AES_BLOCK_SIZE);
-			for(n=0 ; n < AES_BLOCK_SIZE ; ++n)
-				out[n] ^= iv[n];
-			/*			hexdump(stdout, "out ^ iv", out, AES_BLOCK_SIZE); */
-			AES_encrypt(out, out, key);
-			/*			hexdump(stdout,"enc", out, AES_BLOCK_SIZE); */
-			/*			hexdump(stdout,"iv2", iv2, AES_BLOCK_SIZE); */
-			for(n=0 ; n < AES_BLOCK_SIZE ; ++n)
-				out[n] ^= iv2[n];
-			/*			hexdump(stdout,"out", out, AES_BLOCK_SIZE); */
-			iv = out;
-			memcpy(prev, tmp, AES_BLOCK_SIZE);
-			iv2 = prev;
-			len -= AES_BLOCK_SIZE;
-			}
-		}
-	else
-		{
-		/* First backwards */
-		iv = ivec + AES_BLOCK_SIZE*2;
-		iv2 = ivec + AES_BLOCK_SIZE*3;
-		in += length;
-		out += length;
-		while (len >= AES_BLOCK_SIZE)
-			{
-			in -= AES_BLOCK_SIZE;
-			out -= AES_BLOCK_SIZE;
-			memcpy(tmp, in, AES_BLOCK_SIZE);
-			memcpy(tmp2, in, AES_BLOCK_SIZE);
-			/*			hexdump(stdout, "in", in, AES_BLOCK_SIZE); */
-			/*			hexdump(stdout, "iv2", iv2, AES_BLOCK_SIZE); */
-			for(n=0 ; n < AES_BLOCK_SIZE ; ++n)
-				tmp[n] ^= iv2[n];
-			/*			hexdump(stdout, "in ^ iv2", tmp, AES_BLOCK_SIZE); */
-			AES_decrypt(tmp, out, key);
-			/*			hexdump(stdout, "dec", out, AES_BLOCK_SIZE); */
-			/*			hexdump(stdout, "iv", iv, AES_BLOCK_SIZE); */
-			for(n=0 ; n < AES_BLOCK_SIZE ; ++n)
-				out[n] ^= iv[n];
-			/*			hexdump(stdout, "out", out, AES_BLOCK_SIZE); */
-			memcpy(tmp3, tmp2, AES_BLOCK_SIZE);
-			iv = tmp3;
-			iv2 = out;
-			len -= AES_BLOCK_SIZE;
-			}
-
-		/* And now forwards */
-		iv = ivec;
-		iv2 = ivec + AES_BLOCK_SIZE;
-		len = length;
-		while (len >= AES_BLOCK_SIZE)
-			{
-			memcpy(tmp, out, AES_BLOCK_SIZE);
-			memcpy(tmp2, out, AES_BLOCK_SIZE);
-			/*			hexdump(stdout, "intermediate", out, AES_BLOCK_SIZE); */
-			/*			hexdump(stdout, "iv2", iv2, AES_BLOCK_SIZE); */
-			for(n=0 ; n < AES_BLOCK_SIZE ; ++n)
-				tmp[n] ^= iv2[n];
-			/*			hexdump(stdout, "out ^ iv2", tmp, AES_BLOCK_SIZE); */
-			AES_decrypt(tmp, out, key);
-			/*			hexdump(stdout, "dec", out, AES_BLOCK_SIZE); */
-			/*			hexdump(stdout, "iv", ivec, AES_BLOCK_SIZE); */
-			for(n=0 ; n < AES_BLOCK_SIZE ; ++n)
-				out[n] ^= iv[n];
-			/*			hexdump(stdout, "out", out, AES_BLOCK_SIZE); */
-			memcpy(tmp3, tmp2, AES_BLOCK_SIZE);
-			iv = tmp3;
-			iv2 = out;
-			len -= AES_BLOCK_SIZE;
-			in += AES_BLOCK_SIZE;
-			out += AES_BLOCK_SIZE;
-			}
-
-		}
-	}
diff --git a/crypto/openssl/crypto/aes/aes_locl.h b/crypto/openssl/crypto/aes/aes_locl.h
deleted file mode 100644
index 054b442d416f..000000000000
--- a/crypto/openssl/crypto/aes/aes_locl.h
+++ /dev/null
@@ -1,89 +0,0 @@
-/* crypto/aes/aes.h -*- mode:C; c-file-style: "eay" -*- */
-/* ====================================================================
- * Copyright (c) 1998-2002 The OpenSSL Project.  All rights reserved.
- *
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions
- * are met:
- *
- * 1. Redistributions of source code must retain the above copyright
- *    notice, this list of conditions and the following disclaimer. 
- *
- * 2. Redistributions in binary form must reproduce the above copyright
- *    notice, this list of conditions and the following disclaimer in
- *    the documentation and/or other materials provided with the
- *    distribution.
- *
- * 3. All advertising materials mentioning features or use of this
- *    software must display the following acknowledgment:
- *    "This product includes software developed by the OpenSSL Project
- *    for use in the OpenSSL Toolkit. (http://www.openssl.org/)"
- *
- * 4. The names "OpenSSL Toolkit" and "OpenSSL Project" must not be used to
- *    endorse or promote products derived from this software without
- *    prior written permission. For written permission, please contact
- *    openssl-core@openssl.org.
- *
- * 5. Products derived from this software may not be called "OpenSSL"
- *    nor may "OpenSSL" appear in their names without prior written
- *    permission of the OpenSSL Project.
- *
- * 6. Redistributions of any form whatsoever must retain the following
- *    acknowledgment:
- *    "This product includes software developed by the OpenSSL Project
- *    for use in the OpenSSL Toolkit (http://www.openssl.org/)"
- *
- * THIS SOFTWARE IS PROVIDED BY THE OpenSSL PROJECT ``AS IS'' AND ANY
- * EXPRESSED OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
- * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR
- * PURPOSE ARE DISCLAIMED.  IN NO EVENT SHALL THE OpenSSL PROJECT OR
- * ITS CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
- * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
- * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
- * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
- * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
- * STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
- * ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED
- * OF THE POSSIBILITY OF SUCH DAMAGE.
- * ====================================================================
- *
- */
-
-#ifndef HEADER_AES_LOCL_H
-#define HEADER_AES_LOCL_H
-
-#include <openssl/e_os2.h>
-
-#ifdef OPENSSL_NO_AES
-#error AES is disabled.
-#endif
-
-#include <stdio.h>
-#include <stdlib.h>
-#include <string.h>
-
-#if defined(_MSC_VER) && (defined(_M_IX86) || defined(_M_AMD64) || defined(_M_X64))
-# define SWAP(x) (_lrotl(x, 8) & 0x00ff00ff | _lrotr(x, 8) & 0xff00ff00)
-# define GETU32(p) SWAP(*((u32 *)(p)))
-# define PUTU32(ct, st) { *((u32 *)(ct)) = SWAP((st)); }
-#else
-# define GETU32(pt) (((u32)(pt)[0] << 24) ^ ((u32)(pt)[1] << 16) ^ ((u32)(pt)[2] <<  8) ^ ((u32)(pt)[3]))
-# define PUTU32(ct, st) { (ct)[0] = (u8)((st) >> 24); (ct)[1] = (u8)((st) >> 16); (ct)[2] = (u8)((st) >>  8); (ct)[3] = (u8)(st); }
-#endif
-
-#ifdef AES_LONG
-typedef unsigned long u32;
-#else
-typedef unsigned int u32;
-#endif
-typedef unsigned short u16;
-typedef unsigned char u8;
-
-#define MAXKC   (256/32)
-#define MAXKB   (256/8)
-#define MAXNR   14
-
-/* This controls loop-unrolling in aes_core.c */
-#undef FULL_UNROLL
-
-#endif /* !HEADER_AES_LOCL_H */
diff --git a/crypto/openssl/crypto/aes/aes_misc.c b/crypto/openssl/crypto/aes/aes_misc.c
deleted file mode 100644
index 4fead1b4c7c5..000000000000
--- a/crypto/openssl/crypto/aes/aes_misc.c
+++ /dev/null
@@ -1,64 +0,0 @@
-/* crypto/aes/aes_misc.c -*- mode:C; c-file-style: "eay" -*- */
-/* ====================================================================
- * Copyright (c) 1998-2002 The OpenSSL Project.  All rights reserved.
- *
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions
- * are met:
- *
- * 1. Redistributions of source code must retain the above copyright
- *    notice, this list of conditions and the following disclaimer. 
- *
- * 2. Redistributions in binary form must reproduce the above copyright
- *    notice, this list of conditions and the following disclaimer in
- *    the documentation and/or other materials provided with the
- *    distribution.
- *
- * 3. All advertising materials mentioning features or use of this
- *    software must display the following acknowledgment:
- *    "This product includes software developed by the OpenSSL Project
- *    for use in the OpenSSL Toolkit. (http://www.openssl.org/)"
- *
- * 4. The names "OpenSSL Toolkit" and "OpenSSL Project" must not be used to
- *    endorse or promote products derived from this software without
- *    prior written permission. For written permission, please contact
- *    openssl-core@openssl.org.
- *
- * 5. Products derived from this software may not be called "OpenSSL"
- *    nor may "OpenSSL" appear in their names without prior written
- *    permission of the OpenSSL Project.
- *
- * 6. Redistributions of any form whatsoever must retain the following
- *    acknowledgment:
- *    "This product includes software developed by the OpenSSL Project
- *    for use in the OpenSSL Toolkit (http://www.openssl.org/)"
- *
- * THIS SOFTWARE IS PROVIDED BY THE OpenSSL PROJECT ``AS IS'' AND ANY
- * EXPRESSED OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
- * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR
- * PURPOSE ARE DISCLAIMED.  IN NO EVENT SHALL THE OpenSSL PROJECT OR
- * ITS CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
- * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
- * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
- * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
- * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
- * STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
- * ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED
- * OF THE POSSIBILITY OF SUCH DAMAGE.
- * ====================================================================
- *
- */
-
-#include <openssl/opensslv.h>
-#include <openssl/aes.h>
-#include "aes_locl.h"
-
-const char AES_version[]="AES" OPENSSL_VERSION_PTEXT;
-
-const char *AES_options(void) {
-#ifdef FULL_UNROLL
-        return "aes(full)";
-#else   
-        return "aes(partial)";
-#endif
-}
diff --git a/crypto/openssl/crypto/aes/aes_ofb.c b/crypto/openssl/crypto/aes/aes_ofb.c
deleted file mode 100644
index f358bb39e27c..000000000000
--- a/crypto/openssl/crypto/aes/aes_ofb.c
+++ /dev/null
@@ -1,142 +0,0 @@
-/* crypto/aes/aes_ofb.c -*- mode:C; c-file-style: "eay" -*- */
-/* ====================================================================
- * Copyright (c) 1998-2002 The OpenSSL Project.  All rights reserved.
- *
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions
- * are met:
- *
- * 1. Redistributions of source code must retain the above copyright
- *    notice, this list of conditions and the following disclaimer. 
- *
- * 2. Redistributions in binary form must reproduce the above copyright
- *    notice, this list of conditions and the following disclaimer in
- *    the documentation and/or other materials provided with the
- *    distribution.
- *
- * 3. All advertising materials mentioning features or use of this
- *    software must display the following acknowledgment:
- *    "This product includes software developed by the OpenSSL Project
- *    for use in the OpenSSL Toolkit. (http://www.openssl.org/)"
- *
- * 4. The names "OpenSSL Toolkit" and "OpenSSL Project" must not be used to
- *    endorse or promote products derived from this software without
- *    prior written permission. For written permission, please contact
- *    openssl-core@openssl.org.
- *
- * 5. Products derived from this software may not be called "OpenSSL"
- *    nor may "OpenSSL" appear in their names without prior written
- *    permission of the OpenSSL Project.
- *
- * 6. Redistributions of any form whatsoever must retain the following
- *    acknowledgment:
- *    "This product includes software developed by the OpenSSL Project
- *    for use in the OpenSSL Toolkit (http://www.openssl.org/)"
- *
- * THIS SOFTWARE IS PROVIDED BY THE OpenSSL PROJECT ``AS IS'' AND ANY
- * EXPRESSED OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
- * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR
- * PURPOSE ARE DISCLAIMED.  IN NO EVENT SHALL THE OpenSSL PROJECT OR
- * ITS CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
- * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
- * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
- * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
- * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
- * STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
- * ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED
- * OF THE POSSIBILITY OF SUCH DAMAGE.
- * ====================================================================
- *
- */
-/* Copyright (C) 1995-1998 Eric Young (eay@cryptsoft.com)
- * All rights reserved.
- *
- * This package is an SSL implementation written
- * by Eric Young (eay@cryptsoft.com).
- * The implementation was written so as to conform with Netscapes SSL.
- * 
- * This library is free for commercial and non-commercial use as long as
- * the following conditions are aheared to.  The following conditions
- * apply to all code found in this distribution, be it the RC4, RSA,
- * lhash, DES, etc., code; not just the SSL code.  The SSL documentation
- * included with this distribution is covered by the same copyright terms
- * except that the holder is Tim Hudson (tjh@cryptsoft.com).
- * 
- * Copyright remains Eric Young's, and as such any Copyright notices in
- * the code are not to be removed.
- * If this package is used in a product, Eric Young should be given attribution
- * as the author of the parts of the library used.
- * This can be in the form of a textual message at program startup or
- * in documentation (online or textual) provided with the package.
- * 
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions
- * are met:
- * 1. Redistributions of source code must retain the copyright
- *    notice, this list of conditions and the following disclaimer.
- * 2. Redistributions in binary form must reproduce the above copyright
- *    notice, this list of conditions and the following disclaimer in the
- *    documentation and/or other materials provided with the distribution.
- * 3. All advertising materials mentioning features or use of this software
- *    must display the following acknowledgement:
- *    "This product includes cryptographic software written by
- *     Eric Young (eay@cryptsoft.com)"
- *    The word 'cryptographic' can be left out if the rouines from the library
- *    being used are not cryptographic related :-).
- * 4. If you include any Windows specific code (or a derivative thereof) from 
- *    the apps directory (application code) you must include an acknowledgement:
- *    "This product includes software written by Tim Hudson (tjh@cryptsoft.com)"
- * 
- * THIS SOFTWARE IS PROVIDED BY ERIC YOUNG ``AS IS'' AND
- * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
- * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
- * ARE DISCLAIMED.  IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE
- * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
- * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
- * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
- * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
- * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
- * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
- * SUCH DAMAGE.
- * 
- * The licence and distribution terms for any publically available version or
- * derivative of this code cannot be changed.  i.e. this code cannot simply be
- * copied and put under another distribution licence
- * [including the GNU Public Licence.]
- */
-
-#ifndef AES_DEBUG
-# ifndef NDEBUG
-#  define NDEBUG
-# endif
-#endif
-#include <assert.h>
-
-#include <openssl/aes.h>
-#include "aes_locl.h"
-
-/* The input and output encrypted as though 128bit ofb mode is being
- * used.  The extra state information to record how much of the
- * 128bit block we have used is contained in *num;
- */
-void AES_ofb128_encrypt(const unsigned char *in, unsigned char *out,
-	const unsigned long length, const AES_KEY *key,
-	unsigned char *ivec, int *num) {
-
-	unsigned int n;
-	unsigned long l=length;
-
-	assert(in && out && key && ivec && num);
-
-	n = *num;
-
-	while (l--) {
-		if (n == 0) {
-			AES_encrypt(ivec, ivec, key);
-		}
-		*(out++) = *(in++) ^ ivec[n];
-		n = (n+1) % AES_BLOCK_SIZE;
-	}
-
-	*num=n;
-}
diff --git a/crypto/openssl/crypto/aes/asm/aes-586.pl b/crypto/openssl/crypto/aes/asm/aes-586.pl
deleted file mode 100755
index 2774d1cb49c7..000000000000
--- a/crypto/openssl/crypto/aes/asm/aes-586.pl
+++ /dev/null
@@ -1,1532 +0,0 @@
-#!/usr/bin/env perl
-#
-# ====================================================================
-# Written by Andy Polyakov <appro@fy.chalmers.se> for the OpenSSL
-# project. Rights for redistribution and usage in source and binary
-# forms are granted according to the OpenSSL license.
-# ====================================================================
-#
-# Version 3.6.
-#
-# You might fail to appreciate this module performance from the first
-# try. If compared to "vanilla" linux-ia32-icc target, i.e. considered
-# to be *the* best Intel C compiler without -KPIC, performance appears
-# to be virtually identical... But try to re-configure with shared
-# library support... Aha! Intel compiler "suddenly" lags behind by 30%
-# [on P4, more on others]:-) And if compared to position-independent
-# code generated by GNU C, this code performs *more* than *twice* as
-# fast! Yes, all this buzz about PIC means that unlike other hand-
-# coded implementations, this one was explicitly designed to be safe
-# to use even in shared library context... This also means that this
-# code isn't necessarily absolutely fastest "ever," because in order
-# to achieve position independence an extra register has to be
-# off-loaded to stack, which affects the benchmark result.
-#
-# Special note about instruction choice. Do you recall RC4_INT code
-# performing poorly on P4? It might be the time to figure out why.
-# RC4_INT code implies effective address calculations in base+offset*4
-# form. Trouble is that it seems that offset scaling turned to be
-# critical path... At least eliminating scaling resulted in 2.8x RC4
-# performance improvement [as you might recall]. As AES code is hungry
-# for scaling too, I [try to] avoid the latter by favoring off-by-2
-# shifts and masking the result with 0xFF<<2 instead of "boring" 0xFF.
-#
-# As was shown by Dean Gaudet <dean@arctic.org>, the above note turned
-# void. Performance improvement with off-by-2 shifts was observed on
-# intermediate implementation, which was spilling yet another register
-# to stack... Final offset*4 code below runs just a tad faster on P4,
-# but exhibits up to 10% improvement on other cores.
-#
-# Second version is "monolithic" replacement for aes_core.c, which in
-# addition to AES_[de|en]crypt implements AES_set_[de|en]cryption_key.
-# This made it possible to implement little-endian variant of the
-# algorithm without modifying the base C code. Motivating factor for
-# the undertaken effort was that it appeared that in tight IA-32
-# register window little-endian flavor could achieve slightly higher
-# Instruction Level Parallelism, and it indeed resulted in up to 15%
-# better performance on most recent µ-archs...
-#
-# Third version adds AES_cbc_encrypt implementation, which resulted in
-# up to 40% performance imrovement of CBC benchmark results. 40% was
-# observed on P4 core, where "overall" imrovement coefficient, i.e. if
-# compared to PIC generated by GCC and in CBC mode, was observed to be
-# as large as 4x:-) CBC performance is virtually identical to ECB now
-# and on some platforms even better, e.g. 17.6 "small" cycles/byte on
-# Opteron, because certain function prologues and epilogues are
-# effectively taken out of the loop...
-#
-# Version 3.2 implements compressed tables and prefetch of these tables
-# in CBC[!] mode. Former means that 3/4 of table references are now
-# misaligned, which unfortunately has negative impact on elder IA-32
-# implementations, Pentium suffered 30% penalty, PIII - 10%.
-#
-# Version 3.3 avoids L1 cache aliasing between stack frame and
-# S-boxes, and 3.4 - L1 cache aliasing even between key schedule. The
-# latter is achieved by copying the key schedule to controlled place in
-# stack. This unfortunately has rather strong impact on small block CBC
-# performance, ~2x deterioration on 16-byte block if compared to 3.3.
-#
-# Version 3.5 checks if there is L1 cache aliasing between user-supplied
-# key schedule and S-boxes and abstains from copying the former if
-# there is no. This allows end-user to consciously retain small block
-# performance by aligning key schedule in specific manner.
-#
-# Version 3.6 compresses Td4 to 256 bytes and prefetches it in ECB.
-#
-# Current ECB performance numbers for 128-bit key in CPU cycles per
-# processed byte [measure commonly used by AES benchmarkers] are:
-#
-#		small footprint		fully unrolled
-# P4		24			22
-# AMD K8	20			19
-# PIII		25			23
-# Pentium	81			78
-
-push(@INC,"perlasm","../../perlasm");
-require "x86asm.pl";
-
-&asm_init($ARGV[0],"aes-586.pl",$ARGV[$#ARGV] eq "386");
-
-$s0="eax";
-$s1="ebx";
-$s2="ecx";
-$s3="edx";
-$key="edi";
-$acc="esi";
-
-$compromise=0;		# $compromise=128 abstains from copying key
-			# schedule to stack when encrypting inputs
-			# shorter than 128 bytes at the cost of
-			# risksing aliasing with S-boxes. In return
-			# you get way better, up to +70%, small block
-			# performance.
-$small_footprint=1;	# $small_footprint=1 code is ~5% slower [on
-			# recent µ-archs], but ~5 times smaller!
-			# I favor compact code to minimize cache
-			# contention and in hope to "collect" 5% back
-			# in real-life applications...
-$vertical_spin=0;	# shift "verticaly" defaults to 0, because of
-			# its proof-of-concept status...
-
-# Note that there is no decvert(), as well as last encryption round is
-# performed with "horizontal" shifts. This is because this "vertical"
-# implementation [one which groups shifts on a given $s[i] to form a
-# "column," unlike "horizontal" one, which groups shifts on different
-# $s[i] to form a "row"] is work in progress. It was observed to run
-# few percents faster on Intel cores, but not AMD. On AMD K8 core it's
-# whole 12% slower:-( So we face a trade-off... Shall it be resolved
-# some day? Till then the code is considered experimental and by
-# default remains dormant...
-
-sub encvert()
-{ my ($te,@s) = @_;
-  my $v0 = $acc, $v1 = $key;
-
-	&mov	($v0,$s[3]);				# copy s3
-	&mov	(&DWP(4,"esp"),$s[2]);			# save s2
-	&mov	($v1,$s[0]);				# copy s0
-	&mov	(&DWP(8,"esp"),$s[1]);			# save s1
-
-	&movz	($s[2],&HB($s[0]));
-	&and	($s[0],0xFF);
-	&mov	($s[0],&DWP(0,$te,$s[0],8));		# s0>>0
-	&shr	($v1,16);
-	&mov	($s[3],&DWP(3,$te,$s[2],8));		# s0>>8
-	&movz	($s[1],&HB($v1));
-	&and	($v1,0xFF);
-	&mov	($s[2],&DWP(2,$te,$v1,8));		# s0>>16
-	 &mov	($v1,$v0);
-	&mov	($s[1],&DWP(1,$te,$s[1],8));		# s0>>24
-
-	&and	($v0,0xFF);
-	&xor	($s[3],&DWP(0,$te,$v0,8));		# s3>>0
-	&movz	($v0,&HB($v1));
-	&shr	($v1,16);
-	&xor	($s[2],&DWP(3,$te,$v0,8));		# s3>>8
-	&movz	($v0,&HB($v1));
-	&and	($v1,0xFF);
-	&xor	($s[1],&DWP(2,$te,$v1,8));		# s3>>16
-	 &mov	($v1,&DWP(4,"esp"));			# restore s2
-	&xor	($s[0],&DWP(1,$te,$v0,8));		# s3>>24
-
-	&mov	($v0,$v1);
-	&and	($v1,0xFF);
-	&xor	($s[2],&DWP(0,$te,$v1,8));		# s2>>0
-	&movz	($v1,&HB($v0));
-	&shr	($v0,16);
-	&xor	($s[1],&DWP(3,$te,$v1,8));		# s2>>8
-	&movz	($v1,&HB($v0));
-	&and	($v0,0xFF);
-	&xor	($s[0],&DWP(2,$te,$v0,8));		# s2>>16
-	 &mov	($v0,&DWP(8,"esp"));			# restore s1
-	&xor	($s[3],&DWP(1,$te,$v1,8));		# s2>>24
-
-	&mov	($v1,$v0);
-	&and	($v0,0xFF);
-	&xor	($s[1],&DWP(0,$te,$v0,8));		# s1>>0
-	&movz	($v0,&HB($v1));
-	&shr	($v1,16);
-	&xor	($s[0],&DWP(3,$te,$v0,8));		# s1>>8
-	&movz	($v0,&HB($v1));
-	&and	($v1,0xFF);
-	&xor	($s[3],&DWP(2,$te,$v1,8));		# s1>>16
-	 &mov	($key,&DWP(12,"esp"));			# reincarnate v1 as key
-	&xor	($s[2],&DWP(1,$te,$v0,8));		# s1>>24
-}
-
-sub encstep()
-{ my ($i,$te,@s) = @_;
-  my $tmp = $key;
-  my $out = $i==3?$s[0]:$acc;
-
-	# lines marked with #%e?x[i] denote "reordered" instructions...
-	if ($i==3)  {	&mov	($key,&DWP(12,"esp"));		}##%edx
-	else        {	&mov	($out,$s[0]);
-			&and	($out,0xFF);			}
-	if ($i==1)  {	&shr	($s[0],16);			}#%ebx[1]
-	if ($i==2)  {	&shr	($s[0],24);			}#%ecx[2]
-			&mov	($out,&DWP(0,$te,$out,8));
-
-	if ($i==3)  {	$tmp=$s[1];				}##%eax
-			&movz	($tmp,&HB($s[1]));
-			&xor	($out,&DWP(3,$te,$tmp,8));
-
-	if ($i==3)  {	$tmp=$s[2]; &mov ($s[1],&DWP(4,"esp"));	}##%ebx
-	else        {	&mov	($tmp,$s[2]);
-			&shr	($tmp,16);			}
-	if ($i==2)  {	&and	($s[1],0xFF);			}#%edx[2]
-			&and	($tmp,0xFF);
-			&xor	($out,&DWP(2,$te,$tmp,8));
-
-	if ($i==3)  {	$tmp=$s[3]; &mov ($s[2],&DWP(8,"esp"));	}##%ecx
-	elsif($i==2){	&movz	($tmp,&HB($s[3]));		}#%ebx[2]
-	else        {	&mov	($tmp,$s[3]); 
-			&shr	($tmp,24)			}
-			&xor	($out,&DWP(1,$te,$tmp,8));
-	if ($i<2)   {	&mov	(&DWP(4+4*$i,"esp"),$out);	}
-	if ($i==3)  {	&mov	($s[3],$acc);			}
-			&comment();
-}
-
-sub enclast()
-{ my ($i,$te,@s)=@_;
-  my $tmp = $key;
-  my $out = $i==3?$s[0]:$acc;
-
-	if ($i==3)  {	&mov	($key,&DWP(12,"esp"));		}##%edx
-	else        {	&mov	($out,$s[0]);			}
-			&and	($out,0xFF);
-	if ($i==1)  {	&shr	($s[0],16);			}#%ebx[1]
-	if ($i==2)  {	&shr	($s[0],24);			}#%ecx[2]
-			&mov	($out,&DWP(2,$te,$out,8));
-			&and	($out,0x000000ff);
-
-	if ($i==3)  {	$tmp=$s[1];				}##%eax
-			&movz	($tmp,&HB($s[1]));
-			&mov	($tmp,&DWP(0,$te,$tmp,8));
-			&and	($tmp,0x0000ff00);
-			&xor	($out,$tmp);
-
-	if ($i==3)  {	$tmp=$s[2]; &mov ($s[1],&DWP(4,"esp"));	}##%ebx
-	else        {	mov	($tmp,$s[2]);
-			&shr	($tmp,16);			}
-	if ($i==2)  {	&and	($s[1],0xFF);			}#%edx[2]
-			&and	($tmp,0xFF);
-			&mov	($tmp,&DWP(0,$te,$tmp,8));
-			&and	($tmp,0x00ff0000);
-			&xor	($out,$tmp);
-
-	if ($i==3)  {	$tmp=$s[3]; &mov ($s[2],&DWP(8,"esp"));	}##%ecx
-	elsif($i==2){	&movz	($tmp,&HB($s[3]));		}#%ebx[2]
-	else        {	&mov	($tmp,$s[3]);
-			&shr	($tmp,24);			}
-			&mov	($tmp,&DWP(2,$te,$tmp,8));
-			&and	($tmp,0xff000000);
-			&xor	($out,$tmp);
-	if ($i<2)   {	&mov	(&DWP(4+4*$i,"esp"),$out);	}
-	if ($i==3)  {	&mov	($s[3],$acc);			}
-}
-
-sub _data_word() { my $i; while(defined($i=shift)) { &data_word($i,$i); } }
-
-&public_label("AES_Te");
-&function_begin_B("_x86_AES_encrypt");
-	if ($vertical_spin) {
-		# I need high parts of volatile registers to be accessible...
-		&exch	($s1="edi",$key="ebx");
-		&mov	($s2="esi",$acc="ecx");
-	}
-
-	# note that caller is expected to allocate stack frame for me!
-	&mov	(&DWP(12,"esp"),$key);		# save key
-
-	&xor	($s0,&DWP(0,$key));		# xor with key
-	&xor	($s1,&DWP(4,$key));
-	&xor	($s2,&DWP(8,$key));
-	&xor	($s3,&DWP(12,$key));
-
-	&mov	($acc,&DWP(240,$key));		# load key->rounds
-
-	if ($small_footprint) {
-	    &lea	($acc,&DWP(-2,$acc,$acc));
-	    &lea	($acc,&DWP(0,$key,$acc,8));
-	    &mov	(&DWP(16,"esp"),$acc);	# end of key schedule
-	    &align	(4);
-	    &set_label("loop");
-		if ($vertical_spin) {
-		    &encvert("ebp",$s0,$s1,$s2,$s3);
-		} else {
-		    &encstep(0,"ebp",$s0,$s1,$s2,$s3);
-		    &encstep(1,"ebp",$s1,$s2,$s3,$s0);
-		    &encstep(2,"ebp",$s2,$s3,$s0,$s1);
-		    &encstep(3,"ebp",$s3,$s0,$s1,$s2);
-		}
-		&add	($key,16);		# advance rd_key
-		&xor	($s0,&DWP(0,$key));
-		&xor	($s1,&DWP(4,$key));
-		&xor	($s2,&DWP(8,$key));
-		&xor	($s3,&DWP(12,$key));
-	    &cmp	($key,&DWP(16,"esp"));
-	    &mov	(&DWP(12,"esp"),$key);
-	    &jb		(&label("loop"));
-	}
-	else {
-	    &cmp	($acc,10);
-	    &jle	(&label("10rounds"));
-	    &cmp	($acc,12);
-	    &jle	(&label("12rounds"));
-
-	&set_label("14rounds");
-	    for ($i=1;$i<3;$i++) {
-		if ($vertical_spin) {
-		    &encvert("ebp",$s0,$s1,$s2,$s3);
-		} else {
-		    &encstep(0,"ebp",$s0,$s1,$s2,$s3);
-		    &encstep(1,"ebp",$s1,$s2,$s3,$s0);
-		    &encstep(2,"ebp",$s2,$s3,$s0,$s1);
-		    &encstep(3,"ebp",$s3,$s0,$s1,$s2);
-		}
-		&xor	($s0,&DWP(16*$i+0,$key));
-		&xor	($s1,&DWP(16*$i+4,$key));
-		&xor	($s2,&DWP(16*$i+8,$key));
-		&xor	($s3,&DWP(16*$i+12,$key));
-	    }
-	    &add	($key,32);
-	    &mov	(&DWP(12,"esp"),$key);	# advance rd_key
-	&set_label("12rounds");
-	    for ($i=1;$i<3;$i++) {
-		if ($vertical_spin) {
-		    &encvert("ebp",$s0,$s1,$s2,$s3);
-		} else {
-		    &encstep(0,"ebp",$s0,$s1,$s2,$s3);
-		    &encstep(1,"ebp",$s1,$s2,$s3,$s0);
-		    &encstep(2,"ebp",$s2,$s3,$s0,$s1);
-		    &encstep(3,"ebp",$s3,$s0,$s1,$s2);
-		}
-		&xor	($s0,&DWP(16*$i+0,$key));
-		&xor	($s1,&DWP(16*$i+4,$key));
-		&xor	($s2,&DWP(16*$i+8,$key));
-		&xor	($s3,&DWP(16*$i+12,$key));
-	    }
-	    &add	($key,32);
-	    &mov	(&DWP(12,"esp"),$key);	# advance rd_key
-	&set_label("10rounds");
-	    for ($i=1;$i<10;$i++) {
-		if ($vertical_spin) {
-		    &encvert("ebp",$s0,$s1,$s2,$s3);
-		} else {
-		    &encstep(0,"ebp",$s0,$s1,$s2,$s3);
-		    &encstep(1,"ebp",$s1,$s2,$s3,$s0);
-		    &encstep(2,"ebp",$s2,$s3,$s0,$s1);
-		    &encstep(3,"ebp",$s3,$s0,$s1,$s2);
-		}
-		&xor	($s0,&DWP(16*$i+0,$key));
-		&xor	($s1,&DWP(16*$i+4,$key));
-		&xor	($s2,&DWP(16*$i+8,$key));
-		&xor	($s3,&DWP(16*$i+12,$key));
-	    }
-	}
-
-	if ($vertical_spin) {
-	    # "reincarnate" some registers for "horizontal" spin...
-	    &mov	($s1="ebx",$key="edi");
-	    &mov	($s2="ecx",$acc="esi");
-	}
-	&enclast(0,"ebp",$s0,$s1,$s2,$s3);
-	&enclast(1,"ebp",$s1,$s2,$s3,$s0);
-	&enclast(2,"ebp",$s2,$s3,$s0,$s1);
-	&enclast(3,"ebp",$s3,$s0,$s1,$s2);
-
-	&add	($key,$small_footprint?16:160);
-	&xor	($s0,&DWP(0,$key));
-	&xor	($s1,&DWP(4,$key));
-	&xor	($s2,&DWP(8,$key));
-	&xor	($s3,&DWP(12,$key));
-
-	&ret	();
-
-&set_label("AES_Te",64);	# Yes! I keep it in the code segment!
-	&_data_word(0xa56363c6, 0x847c7cf8, 0x997777ee, 0x8d7b7bf6);
-	&_data_word(0x0df2f2ff, 0xbd6b6bd6, 0xb16f6fde, 0x54c5c591);
-	&_data_word(0x50303060, 0x03010102, 0xa96767ce, 0x7d2b2b56);
-	&_data_word(0x19fefee7, 0x62d7d7b5, 0xe6abab4d, 0x9a7676ec);
-	&_data_word(0x45caca8f, 0x9d82821f, 0x40c9c989, 0x877d7dfa);
-	&_data_word(0x15fafaef, 0xeb5959b2, 0xc947478e, 0x0bf0f0fb);
-	&_data_word(0xecadad41, 0x67d4d4b3, 0xfda2a25f, 0xeaafaf45);
-	&_data_word(0xbf9c9c23, 0xf7a4a453, 0x967272e4, 0x5bc0c09b);
-	&_data_word(0xc2b7b775, 0x1cfdfde1, 0xae93933d, 0x6a26264c);
-	&_data_word(0x5a36366c, 0x413f3f7e, 0x02f7f7f5, 0x4fcccc83);
-	&_data_word(0x5c343468, 0xf4a5a551, 0x34e5e5d1, 0x08f1f1f9);
-	&_data_word(0x937171e2, 0x73d8d8ab, 0x53313162, 0x3f15152a);
-	&_data_word(0x0c040408, 0x52c7c795, 0x65232346, 0x5ec3c39d);
-	&_data_word(0x28181830, 0xa1969637, 0x0f05050a, 0xb59a9a2f);
-	&_data_word(0x0907070e, 0x36121224, 0x9b80801b, 0x3de2e2df);
-	&_data_word(0x26ebebcd, 0x6927274e, 0xcdb2b27f, 0x9f7575ea);
-	&_data_word(0x1b090912, 0x9e83831d, 0x742c2c58, 0x2e1a1a34);
-	&_data_word(0x2d1b1b36, 0xb26e6edc, 0xee5a5ab4, 0xfba0a05b);
-	&_data_word(0xf65252a4, 0x4d3b3b76, 0x61d6d6b7, 0xceb3b37d);
-	&_data_word(0x7b292952, 0x3ee3e3dd, 0x712f2f5e, 0x97848413);
-	&_data_word(0xf55353a6, 0x68d1d1b9, 0x00000000, 0x2cededc1);
-	&_data_word(0x60202040, 0x1ffcfce3, 0xc8b1b179, 0xed5b5bb6);
-	&_data_word(0xbe6a6ad4, 0x46cbcb8d, 0xd9bebe67, 0x4b393972);
-	&_data_word(0xde4a4a94, 0xd44c4c98, 0xe85858b0, 0x4acfcf85);
-	&_data_word(0x6bd0d0bb, 0x2aefefc5, 0xe5aaaa4f, 0x16fbfbed);
-	&_data_word(0xc5434386, 0xd74d4d9a, 0x55333366, 0x94858511);
-	&_data_word(0xcf45458a, 0x10f9f9e9, 0x06020204, 0x817f7ffe);
-	&_data_word(0xf05050a0, 0x443c3c78, 0xba9f9f25, 0xe3a8a84b);
-	&_data_word(0xf35151a2, 0xfea3a35d, 0xc0404080, 0x8a8f8f05);
-	&_data_word(0xad92923f, 0xbc9d9d21, 0x48383870, 0x04f5f5f1);
-	&_data_word(0xdfbcbc63, 0xc1b6b677, 0x75dadaaf, 0x63212142);
-	&_data_word(0x30101020, 0x1affffe5, 0x0ef3f3fd, 0x6dd2d2bf);
-	&_data_word(0x4ccdcd81, 0x140c0c18, 0x35131326, 0x2fececc3);
-	&_data_word(0xe15f5fbe, 0xa2979735, 0xcc444488, 0x3917172e);
-	&_data_word(0x57c4c493, 0xf2a7a755, 0x827e7efc, 0x473d3d7a);
-	&_data_word(0xac6464c8, 0xe75d5dba, 0x2b191932, 0x957373e6);
-	&_data_word(0xa06060c0, 0x98818119, 0xd14f4f9e, 0x7fdcdca3);
-	&_data_word(0x66222244, 0x7e2a2a54, 0xab90903b, 0x8388880b);
-	&_data_word(0xca46468c, 0x29eeeec7, 0xd3b8b86b, 0x3c141428);
-	&_data_word(0x79dedea7, 0xe25e5ebc, 0x1d0b0b16, 0x76dbdbad);
-	&_data_word(0x3be0e0db, 0x56323264, 0x4e3a3a74, 0x1e0a0a14);
-	&_data_word(0xdb494992, 0x0a06060c, 0x6c242448, 0xe45c5cb8);
-	&_data_word(0x5dc2c29f, 0x6ed3d3bd, 0xefacac43, 0xa66262c4);
-	&_data_word(0xa8919139, 0xa4959531, 0x37e4e4d3, 0x8b7979f2);
-	&_data_word(0x32e7e7d5, 0x43c8c88b, 0x5937376e, 0xb76d6dda);
-	&_data_word(0x8c8d8d01, 0x64d5d5b1, 0xd24e4e9c, 0xe0a9a949);
-	&_data_word(0xb46c6cd8, 0xfa5656ac, 0x07f4f4f3, 0x25eaeacf);
-	&_data_word(0xaf6565ca, 0x8e7a7af4, 0xe9aeae47, 0x18080810);
-	&_data_word(0xd5baba6f, 0x887878f0, 0x6f25254a, 0x722e2e5c);
-	&_data_word(0x241c1c38, 0xf1a6a657, 0xc7b4b473, 0x51c6c697);
-	&_data_word(0x23e8e8cb, 0x7cdddda1, 0x9c7474e8, 0x211f1f3e);
-	&_data_word(0xdd4b4b96, 0xdcbdbd61, 0x868b8b0d, 0x858a8a0f);
-	&_data_word(0x907070e0, 0x423e3e7c, 0xc4b5b571, 0xaa6666cc);
-	&_data_word(0xd8484890, 0x05030306, 0x01f6f6f7, 0x120e0e1c);
-	&_data_word(0xa36161c2, 0x5f35356a, 0xf95757ae, 0xd0b9b969);
-	&_data_word(0x91868617, 0x58c1c199, 0x271d1d3a, 0xb99e9e27);
-	&_data_word(0x38e1e1d9, 0x13f8f8eb, 0xb398982b, 0x33111122);
-	&_data_word(0xbb6969d2, 0x70d9d9a9, 0x898e8e07, 0xa7949433);
-	&_data_word(0xb69b9b2d, 0x221e1e3c, 0x92878715, 0x20e9e9c9);
-	&_data_word(0x49cece87, 0xff5555aa, 0x78282850, 0x7adfdfa5);
-	&_data_word(0x8f8c8c03, 0xf8a1a159, 0x80898909, 0x170d0d1a);
-	&_data_word(0xdabfbf65, 0x31e6e6d7, 0xc6424284, 0xb86868d0);
-	&_data_word(0xc3414182, 0xb0999929, 0x772d2d5a, 0x110f0f1e);
-	&_data_word(0xcbb0b07b, 0xfc5454a8, 0xd6bbbb6d, 0x3a16162c);
-#rcon:
-	&data_word(0x00000001, 0x00000002, 0x00000004, 0x00000008);
-	&data_word(0x00000010, 0x00000020, 0x00000040, 0x00000080);
-	&data_word(0x0000001b, 0x00000036, 0, 0, 0, 0, 0, 0);
-&function_end_B("_x86_AES_encrypt");
-
-# void AES_encrypt (const void *inp,void *out,const AES_KEY *key);
-&public_label("AES_Te");
-&function_begin("AES_encrypt");
-	&mov	($acc,&wparam(0));		# load inp
-	&mov	($key,&wparam(2));		# load key
-
-	&mov	($s0,"esp");
-	&sub	("esp",24);
-	&and	("esp",-64);
-	&add	("esp",4);
-	&mov	(&DWP(16,"esp"),$s0);
-
-	&call   (&label("pic_point"));          # make it PIC!
-	&set_label("pic_point");
-	&blindpop("ebp");
-	&lea    ("ebp",&DWP(&label("AES_Te")."-".&label("pic_point"),"ebp"));
-
-	&mov	($s0,&DWP(0,$acc));		# load input data
-	&mov	($s1,&DWP(4,$acc));
-	&mov	($s2,&DWP(8,$acc));
-	&mov	($s3,&DWP(12,$acc));
-
-	&call	("_x86_AES_encrypt");
-
-	&mov	("esp",&DWP(16,"esp"));
-
-	&mov	($acc,&wparam(1));		# load out
-	&mov	(&DWP(0,$acc),$s0);		# write output data
-	&mov	(&DWP(4,$acc),$s1);
-	&mov	(&DWP(8,$acc),$s2);
-	&mov	(&DWP(12,$acc),$s3);
-&function_end("AES_encrypt");
-
-#------------------------------------------------------------------#
-
-sub decstep()
-{ my ($i,$td,@s) = @_;
-  my $tmp = $key;
-  my $out = $i==3?$s[0]:$acc;
-
-	# no instructions are reordered, as performance appears
-	# optimal... or rather that all attempts to reorder didn't
-	# result in better performance [which by the way is not a
-	# bit lower than ecryption].
-	if($i==3)   {	&mov	($key,&DWP(12,"esp"));		}
-	else        {	&mov	($out,$s[0]);			}
-			&and	($out,0xFF);
-			&mov	($out,&DWP(0,$td,$out,8));
-
-	if ($i==3)  {	$tmp=$s[1];				}
-			&movz	($tmp,&HB($s[1]));
-			&xor	($out,&DWP(3,$td,$tmp,8));
-
-	if ($i==3)  {	$tmp=$s[2]; &mov ($s[1],$acc);		}
-	else        {	&mov	($tmp,$s[2]);			}
-			&shr	($tmp,16);
-			&and	($tmp,0xFF);
-			&xor	($out,&DWP(2,$td,$tmp,8));
-
-	if ($i==3)  {	$tmp=$s[3]; &mov ($s[2],&DWP(8,"esp"));	}
-	else        {	&mov	($tmp,$s[3]);			}
-			&shr	($tmp,24);
-			&xor	($out,&DWP(1,$td,$tmp,8));
-	if ($i<2)   {	&mov	(&DWP(4+4*$i,"esp"),$out);	}
-	if ($i==3)  {	&mov	($s[3],&DWP(4,"esp"));		}
-			&comment();
-}
-
-sub declast()
-{ my ($i,$td,@s)=@_;
-  my $tmp = $key;
-  my $out = $i==3?$s[0]:$acc;
-
-	if($i==3)   {	&mov	($key,&DWP(12,"esp"));		}
-	else        {	&mov	($out,$s[0]);			}
-			&and	($out,0xFF);
-			&movz	($out,&DWP(2048,$td,$out,1));
-
-	if ($i==3)  {	$tmp=$s[1];				}
-			&movz	($tmp,&HB($s[1]));
-			&movz	($tmp,&DWP(2048,$td,$tmp,1));
-			&shl	($tmp,8);
-			&xor	($out,$tmp);
-
-	if ($i==3)  {	$tmp=$s[2]; &mov ($s[1],$acc);		}
-	else        {	mov	($tmp,$s[2]);			}
-			&shr	($tmp,16);
-			&and	($tmp,0xFF);
-			&movz	($tmp,&DWP(2048,$td,$tmp,1));
-			&shl	($tmp,16);
-			&xor	($out,$tmp);
-
-	if ($i==3)  {	$tmp=$s[3]; &mov ($s[2],&DWP(8,"esp"));	}
-	else        {	&mov	($tmp,$s[3]);			}
-			&shr	($tmp,24);
-			&movz	($tmp,&DWP(2048,$td,$tmp,1));
-			&shl	($tmp,24);
-			&xor	($out,$tmp);
-	if ($i<2)   {	&mov	(&DWP(4+4*$i,"esp"),$out);	}
-	if ($i==3)  {	&mov	($s[3],&DWP(4,"esp"));		}
-}
-
-&public_label("AES_Td");
-&function_begin_B("_x86_AES_decrypt");
-	# note that caller is expected to allocate stack frame for me!
-	&mov	(&DWP(12,"esp"),$key);		# save key
-
-	&xor	($s0,&DWP(0,$key));		# xor with key
-	&xor	($s1,&DWP(4,$key));
-	&xor	($s2,&DWP(8,$key));
-	&xor	($s3,&DWP(12,$key));
-
-	&mov	($acc,&DWP(240,$key));		# load key->rounds
-
-	if ($small_footprint) {
-	    &lea	($acc,&DWP(-2,$acc,$acc));
-	    &lea	($acc,&DWP(0,$key,$acc,8));
-	    &mov	(&DWP(16,"esp"),$acc);	# end of key schedule
-	    &align	(4);
-	    &set_label("loop");
-		&decstep(0,"ebp",$s0,$s3,$s2,$s1);
-		&decstep(1,"ebp",$s1,$s0,$s3,$s2);
-		&decstep(2,"ebp",$s2,$s1,$s0,$s3);
-		&decstep(3,"ebp",$s3,$s2,$s1,$s0);
-		&add	($key,16);		# advance rd_key
-		&xor	($s0,&DWP(0,$key));
-		&xor	($s1,&DWP(4,$key));
-		&xor	($s2,&DWP(8,$key));
-		&xor	($s3,&DWP(12,$key));
-	    &cmp	($key,&DWP(16,"esp"));
-	    &mov	(&DWP(12,"esp"),$key);
-	    &jb		(&label("loop"));
-	}
-	else {
-	    &cmp	($acc,10);
-	    &jle	(&label("10rounds"));
-	    &cmp	($acc,12);
-	    &jle	(&label("12rounds"));
-
-	&set_label("14rounds");
-	    for ($i=1;$i<3;$i++) {
-		&decstep(0,"ebp",$s0,$s3,$s2,$s1);
-		&decstep(1,"ebp",$s1,$s0,$s3,$s2);
-		&decstep(2,"ebp",$s2,$s1,$s0,$s3);
-		&decstep(3,"ebp",$s3,$s2,$s1,$s0);
-		&xor	($s0,&DWP(16*$i+0,$key));
-		&xor	($s1,&DWP(16*$i+4,$key));
-		&xor	($s2,&DWP(16*$i+8,$key));
-		&xor	($s3,&DWP(16*$i+12,$key));
-	    }
-	    &add	($key,32);
-	    &mov	(&DWP(12,"esp"),$key);	# advance rd_key
-	&set_label("12rounds");
-	    for ($i=1;$i<3;$i++) {
-		&decstep(0,"ebp",$s0,$s3,$s2,$s1);
-		&decstep(1,"ebp",$s1,$s0,$s3,$s2);
-		&decstep(2,"ebp",$s2,$s1,$s0,$s3);
-		&decstep(3,"ebp",$s3,$s2,$s1,$s0);
-		&xor	($s0,&DWP(16*$i+0,$key));
-		&xor	($s1,&DWP(16*$i+4,$key));
-		&xor	($s2,&DWP(16*$i+8,$key));
-		&xor	($s3,&DWP(16*$i+12,$key));
-	    }
-	    &add	($key,32);
-	    &mov	(&DWP(12,"esp"),$key);	# advance rd_key
-	&set_label("10rounds");
-	    for ($i=1;$i<10;$i++) {
-		&decstep(0,"ebp",$s0,$s3,$s2,$s1);
-		&decstep(1,"ebp",$s1,$s0,$s3,$s2);
-		&decstep(2,"ebp",$s2,$s1,$s0,$s3);
-		&decstep(3,"ebp",$s3,$s2,$s1,$s0);
-		&xor	($s0,&DWP(16*$i+0,$key));
-		&xor	($s1,&DWP(16*$i+4,$key));
-		&xor	($s2,&DWP(16*$i+8,$key));
-		&xor	($s3,&DWP(16*$i+12,$key));
-	    }
-	}
-
-	&declast(0,"ebp",$s0,$s3,$s2,$s1);
-	&declast(1,"ebp",$s1,$s0,$s3,$s2);
-	&declast(2,"ebp",$s2,$s1,$s0,$s3);
-	&declast(3,"ebp",$s3,$s2,$s1,$s0);
-
-	&add	($key,$small_footprint?16:160);
-	&xor	($s0,&DWP(0,$key));
-	&xor	($s1,&DWP(4,$key));
-	&xor	($s2,&DWP(8,$key));
-	&xor	($s3,&DWP(12,$key));
-
-	&ret	();
-
-&set_label("AES_Td",64);	# Yes! I keep it in the code segment!
-	&_data_word(0x50a7f451, 0x5365417e, 0xc3a4171a, 0x965e273a);
-	&_data_word(0xcb6bab3b, 0xf1459d1f, 0xab58faac, 0x9303e34b);
-	&_data_word(0x55fa3020, 0xf66d76ad, 0x9176cc88, 0x254c02f5);
-	&_data_word(0xfcd7e54f, 0xd7cb2ac5, 0x80443526, 0x8fa362b5);
-	&_data_word(0x495ab1de, 0x671bba25, 0x980eea45, 0xe1c0fe5d);
-	&_data_word(0x02752fc3, 0x12f04c81, 0xa397468d, 0xc6f9d36b);
-	&_data_word(0xe75f8f03, 0x959c9215, 0xeb7a6dbf, 0xda595295);
-	&_data_word(0x2d83bed4, 0xd3217458, 0x2969e049, 0x44c8c98e);
-	&_data_word(0x6a89c275, 0x78798ef4, 0x6b3e5899, 0xdd71b927);
-	&_data_word(0xb64fe1be, 0x17ad88f0, 0x66ac20c9, 0xb43ace7d);
-	&_data_word(0x184adf63, 0x82311ae5, 0x60335197, 0x457f5362);
-	&_data_word(0xe07764b1, 0x84ae6bbb, 0x1ca081fe, 0x942b08f9);
-	&_data_word(0x58684870, 0x19fd458f, 0x876cde94, 0xb7f87b52);
-	&_data_word(0x23d373ab, 0xe2024b72, 0x578f1fe3, 0x2aab5566);
-	&_data_word(0x0728ebb2, 0x03c2b52f, 0x9a7bc586, 0xa50837d3);
-	&_data_word(0xf2872830, 0xb2a5bf23, 0xba6a0302, 0x5c8216ed);
-	&_data_word(0x2b1ccf8a, 0x92b479a7, 0xf0f207f3, 0xa1e2694e);
-	&_data_word(0xcdf4da65, 0xd5be0506, 0x1f6234d1, 0x8afea6c4);
-	&_data_word(0x9d532e34, 0xa055f3a2, 0x32e18a05, 0x75ebf6a4);
-	&_data_word(0x39ec830b, 0xaaef6040, 0x069f715e, 0x51106ebd);
-	&_data_word(0xf98a213e, 0x3d06dd96, 0xae053edd, 0x46bde64d);
-	&_data_word(0xb58d5491, 0x055dc471, 0x6fd40604, 0xff155060);
-	&_data_word(0x24fb9819, 0x97e9bdd6, 0xcc434089, 0x779ed967);
-	&_data_word(0xbd42e8b0, 0x888b8907, 0x385b19e7, 0xdbeec879);
-	&_data_word(0x470a7ca1, 0xe90f427c, 0xc91e84f8, 0x00000000);
-	&_data_word(0x83868009, 0x48ed2b32, 0xac70111e, 0x4e725a6c);
-	&_data_word(0xfbff0efd, 0x5638850f, 0x1ed5ae3d, 0x27392d36);
-	&_data_word(0x64d90f0a, 0x21a65c68, 0xd1545b9b, 0x3a2e3624);
-	&_data_word(0xb1670a0c, 0x0fe75793, 0xd296eeb4, 0x9e919b1b);
-	&_data_word(0x4fc5c080, 0xa220dc61, 0x694b775a, 0x161a121c);
-	&_data_word(0x0aba93e2, 0xe52aa0c0, 0x43e0223c, 0x1d171b12);
-	&_data_word(0x0b0d090e, 0xadc78bf2, 0xb9a8b62d, 0xc8a91e14);
-	&_data_word(0x8519f157, 0x4c0775af, 0xbbdd99ee, 0xfd607fa3);
-	&_data_word(0x9f2601f7, 0xbcf5725c, 0xc53b6644, 0x347efb5b);
-	&_data_word(0x7629438b, 0xdcc623cb, 0x68fcedb6, 0x63f1e4b8);
-	&_data_word(0xcadc31d7, 0x10856342, 0x40229713, 0x2011c684);
-	&_data_word(0x7d244a85, 0xf83dbbd2, 0x1132f9ae, 0x6da129c7);
-	&_data_word(0x4b2f9e1d, 0xf330b2dc, 0xec52860d, 0xd0e3c177);
-	&_data_word(0x6c16b32b, 0x99b970a9, 0xfa489411, 0x2264e947);
-	&_data_word(0xc48cfca8, 0x1a3ff0a0, 0xd82c7d56, 0xef903322);
-	&_data_word(0xc74e4987, 0xc1d138d9, 0xfea2ca8c, 0x360bd498);
-	&_data_word(0xcf81f5a6, 0x28de7aa5, 0x268eb7da, 0xa4bfad3f);
-	&_data_word(0xe49d3a2c, 0x0d927850, 0x9bcc5f6a, 0x62467e54);
-	&_data_word(0xc2138df6, 0xe8b8d890, 0x5ef7392e, 0xf5afc382);
-	&_data_word(0xbe805d9f, 0x7c93d069, 0xa92dd56f, 0xb31225cf);
-	&_data_word(0x3b99acc8, 0xa77d1810, 0x6e639ce8, 0x7bbb3bdb);
-	&_data_word(0x097826cd, 0xf418596e, 0x01b79aec, 0xa89a4f83);
-	&_data_word(0x656e95e6, 0x7ee6ffaa, 0x08cfbc21, 0xe6e815ef);
-	&_data_word(0xd99be7ba, 0xce366f4a, 0xd4099fea, 0xd67cb029);
-	&_data_word(0xafb2a431, 0x31233f2a, 0x3094a5c6, 0xc066a235);
-	&_data_word(0x37bc4e74, 0xa6ca82fc, 0xb0d090e0, 0x15d8a733);
-	&_data_word(0x4a9804f1, 0xf7daec41, 0x0e50cd7f, 0x2ff69117);
-	&_data_word(0x8dd64d76, 0x4db0ef43, 0x544daacc, 0xdf0496e4);
-	&_data_word(0xe3b5d19e, 0x1b886a4c, 0xb81f2cc1, 0x7f516546);
-	&_data_word(0x04ea5e9d, 0x5d358c01, 0x737487fa, 0x2e410bfb);
-	&_data_word(0x5a1d67b3, 0x52d2db92, 0x335610e9, 0x1347d66d);
-	&_data_word(0x8c61d79a, 0x7a0ca137, 0x8e14f859, 0x893c13eb);
-	&_data_word(0xee27a9ce, 0x35c961b7, 0xede51ce1, 0x3cb1477a);
-	&_data_word(0x59dfd29c, 0x3f73f255, 0x79ce1418, 0xbf37c773);
-	&_data_word(0xeacdf753, 0x5baafd5f, 0x146f3ddf, 0x86db4478);
-	&_data_word(0x81f3afca, 0x3ec468b9, 0x2c342438, 0x5f40a3c2);
-	&_data_word(0x72c31d16, 0x0c25e2bc, 0x8b493c28, 0x41950dff);
-	&_data_word(0x7101a839, 0xdeb30c08, 0x9ce4b4d8, 0x90c15664);
-	&_data_word(0x6184cb7b, 0x70b632d5, 0x745c6c48, 0x4257b8d0);
-#Td4:
-	&data_byte(0x52, 0x09, 0x6a, 0xd5, 0x30, 0x36, 0xa5, 0x38);
-	&data_byte(0xbf, 0x40, 0xa3, 0x9e, 0x81, 0xf3, 0xd7, 0xfb);
-	&data_byte(0x7c, 0xe3, 0x39, 0x82, 0x9b, 0x2f, 0xff, 0x87);
-	&data_byte(0x34, 0x8e, 0x43, 0x44, 0xc4, 0xde, 0xe9, 0xcb);
-	&data_byte(0x54, 0x7b, 0x94, 0x32, 0xa6, 0xc2, 0x23, 0x3d);
-	&data_byte(0xee, 0x4c, 0x95, 0x0b, 0x42, 0xfa, 0xc3, 0x4e);
-	&data_byte(0x08, 0x2e, 0xa1, 0x66, 0x28, 0xd9, 0x24, 0xb2);
-	&data_byte(0x76, 0x5b, 0xa2, 0x49, 0x6d, 0x8b, 0xd1, 0x25);
-	&data_byte(0x72, 0xf8, 0xf6, 0x64, 0x86, 0x68, 0x98, 0x16);
-	&data_byte(0xd4, 0xa4, 0x5c, 0xcc, 0x5d, 0x65, 0xb6, 0x92);
-	&data_byte(0x6c, 0x70, 0x48, 0x50, 0xfd, 0xed, 0xb9, 0xda);
-	&data_byte(0x5e, 0x15, 0x46, 0x57, 0xa7, 0x8d, 0x9d, 0x84);
-	&data_byte(0x90, 0xd8, 0xab, 0x00, 0x8c, 0xbc, 0xd3, 0x0a);
-	&data_byte(0xf7, 0xe4, 0x58, 0x05, 0xb8, 0xb3, 0x45, 0x06);
-	&data_byte(0xd0, 0x2c, 0x1e, 0x8f, 0xca, 0x3f, 0x0f, 0x02);
-	&data_byte(0xc1, 0xaf, 0xbd, 0x03, 0x01, 0x13, 0x8a, 0x6b);
-	&data_byte(0x3a, 0x91, 0x11, 0x41, 0x4f, 0x67, 0xdc, 0xea);
-	&data_byte(0x97, 0xf2, 0xcf, 0xce, 0xf0, 0xb4, 0xe6, 0x73);
-	&data_byte(0x96, 0xac, 0x74, 0x22, 0xe7, 0xad, 0x35, 0x85);
-	&data_byte(0xe2, 0xf9, 0x37, 0xe8, 0x1c, 0x75, 0xdf, 0x6e);
-	&data_byte(0x47, 0xf1, 0x1a, 0x71, 0x1d, 0x29, 0xc5, 0x89);
-	&data_byte(0x6f, 0xb7, 0x62, 0x0e, 0xaa, 0x18, 0xbe, 0x1b);
-	&data_byte(0xfc, 0x56, 0x3e, 0x4b, 0xc6, 0xd2, 0x79, 0x20);
-	&data_byte(0x9a, 0xdb, 0xc0, 0xfe, 0x78, 0xcd, 0x5a, 0xf4);
-	&data_byte(0x1f, 0xdd, 0xa8, 0x33, 0x88, 0x07, 0xc7, 0x31);
-	&data_byte(0xb1, 0x12, 0x10, 0x59, 0x27, 0x80, 0xec, 0x5f);
-	&data_byte(0x60, 0x51, 0x7f, 0xa9, 0x19, 0xb5, 0x4a, 0x0d);
-	&data_byte(0x2d, 0xe5, 0x7a, 0x9f, 0x93, 0xc9, 0x9c, 0xef);
-	&data_byte(0xa0, 0xe0, 0x3b, 0x4d, 0xae, 0x2a, 0xf5, 0xb0);
-	&data_byte(0xc8, 0xeb, 0xbb, 0x3c, 0x83, 0x53, 0x99, 0x61);
-	&data_byte(0x17, 0x2b, 0x04, 0x7e, 0xba, 0x77, 0xd6, 0x26);
-	&data_byte(0xe1, 0x69, 0x14, 0x63, 0x55, 0x21, 0x0c, 0x7d);
-&function_end_B("_x86_AES_decrypt");
-
-# void AES_decrypt (const void *inp,void *out,const AES_KEY *key);
-&public_label("AES_Td");
-&function_begin("AES_decrypt");
-	&mov	($acc,&wparam(0));		# load inp
-	&mov	($key,&wparam(2));		# load key
-
-	&mov	($s0,"esp");
-	&sub	("esp",24);
-	&and	("esp",-64);
-	&add	("esp",4);
-	&mov	(&DWP(16,"esp"),$s0);
-
-	&call   (&label("pic_point"));          # make it PIC!
-	&set_label("pic_point");
-	&blindpop("ebp");
-	&lea    ("ebp",&DWP(&label("AES_Td")."-".&label("pic_point"),"ebp"));
-
-	# prefetch Td4
-	&lea	("ebp",&DWP(2048+128,"ebp"));
-	&mov	($s0,&DWP(0-128,"ebp"));
-	&mov	($s1,&DWP(32-128,"ebp"));
-	&mov	($s2,&DWP(64-128,"ebp"));
-	&mov	($s3,&DWP(96-128,"ebp"));
-	&mov	($s0,&DWP(128-128,"ebp"));
-	&mov	($s1,&DWP(160-128,"ebp"));
-	&mov	($s2,&DWP(192-128,"ebp"));
-	&mov	($s3,&DWP(224-128,"ebp"));
-	&lea	("ebp",&DWP(-2048-128,"ebp"));
-
-	&mov	($s0,&DWP(0,$acc));		# load input data
-	&mov	($s1,&DWP(4,$acc));
-	&mov	($s2,&DWP(8,$acc));
-	&mov	($s3,&DWP(12,$acc));
-
-	&call	("_x86_AES_decrypt");
-
-	&mov	("esp",&DWP(16,"esp"));
-
-	&mov	($acc,&wparam(1));		# load out
-	&mov	(&DWP(0,$acc),$s0);		# write output data
-	&mov	(&DWP(4,$acc),$s1);
-	&mov	(&DWP(8,$acc),$s2);
-	&mov	(&DWP(12,$acc),$s3);
-&function_end("AES_decrypt");
-
-# void AES_cbc_encrypt (const void char *inp, unsigned char *out,
-#			size_t length, const AES_KEY *key,
-#			unsigned char *ivp,const int enc);
-{
-# stack frame layout
-# -4(%esp)	0(%esp)		return address
-# 0(%esp)	4(%esp)		tmp1
-# 4(%esp)	8(%esp)		tmp2
-# 8(%esp)	12(%esp)	key
-# 12(%esp)	16(%esp)	end of key schedule
-my $_esp=&DWP(16,"esp");	#saved %esp
-my $_inp=&DWP(20,"esp");	#copy of wparam(0)
-my $_out=&DWP(24,"esp");	#copy of wparam(1)
-my $_len=&DWP(28,"esp");	#copy of wparam(2)
-my $_key=&DWP(32,"esp");	#copy of wparam(3)
-my $_ivp=&DWP(36,"esp");	#copy of wparam(4)
-my $_tmp=&DWP(40,"esp");	#volatile variable
-my $ivec=&DWP(44,"esp");	#ivec[16]
-my $aes_key=&DWP(60,"esp");	#copy of aes_key
-my $mark=&DWP(60+240,"esp");	#copy of aes_key->rounds
-
-&public_label("AES_Te");
-&public_label("AES_Td");
-&function_begin("AES_cbc_encrypt");
-	&mov	($s2 eq "ecx"? $s2 : "",&wparam(2));	# load len
-	&cmp	($s2,0);
-	&je	(&label("enc_out"));
-
-	&call   (&label("pic_point"));		# make it PIC!
-	&set_label("pic_point");
-	&blindpop("ebp");
-
-	&pushf	();
-	&cld	();
-
-	&cmp	(&wparam(5),0);
-	&je	(&label("DECRYPT"));
-
-	&lea    ("ebp",&DWP(&label("AES_Te")."-".&label("pic_point"),"ebp"));
-
-	# allocate aligned stack frame...
-	&lea	($key,&DWP(-64-244,"esp"));
-	&and	($key,-64);
-
-	# ... and make sure it doesn't alias with AES_Te modulo 4096
-	&mov	($s0,"ebp");
-	&lea	($s1,&DWP(2048,"ebp"));
-	&mov	($s3,$key);
-	&and	($s0,0xfff);		# s = %ebp&0xfff
-	&and	($s1,0xfff);		# e = (%ebp+2048)&0xfff
-	&and	($s3,0xfff);		# p = %esp&0xfff
-
-	&cmp	($s3,$s1);		# if (p>=e) %esp =- (p-e);
-	&jb	(&label("te_break_out"));
-	&sub	($s3,$s1);
-	&sub	($key,$s3);
-	&jmp	(&label("te_ok"));
-	&set_label("te_break_out");	# else %esp -= (p-s)&0xfff + framesz;
-	&sub	($s3,$s0);
-	&and	($s3,0xfff);
-	&add	($s3,64+256);
-	&sub	($key,$s3);
-	&align	(4);
-	&set_label("te_ok");
-
-	&mov	($s0,&wparam(0));	# load inp
-	&mov	($s1,&wparam(1));	# load out
-	&mov	($s3,&wparam(3));	# load key
-	&mov	($acc,&wparam(4));	# load ivp
-
-	&exch	("esp",$key);
-	&add	("esp",4);		# reserve for return address!
-	&mov	($_esp,$key);		# save %esp
-
-	&mov	($_inp,$s0);		# save copy of inp
-	&mov	($_out,$s1);		# save copy of out
-	&mov	($_len,$s2);		# save copy of len
-	&mov	($_key,$s3);		# save copy of key
-	&mov	($_ivp,$acc);		# save copy of ivp
-
-	&mov	($mark,0);		# copy of aes_key->rounds = 0;
-	if ($compromise) {
-		&cmp	($s2,$compromise);
-		&jb	(&label("skip_ecopy"));
-	}
-	# do we copy key schedule to stack?
-	&mov	($s1 eq "ebx" ? $s1 : "",$s3);
-	&mov	($s2 eq "ecx" ? $s2 : "",244/4);
-	&sub	($s1,"ebp");
-	&mov	("esi",$s3);
-	&and	($s1,0xfff);
-	&lea	("edi",$aes_key);
-	&cmp	($s1,2048);
-	&jb	(&label("do_ecopy"));
-	&cmp	($s1,4096-244);
-	&jb	(&label("skip_ecopy"));
-	&align	(4);
-	&set_label("do_ecopy");
-		&mov	($_key,"edi");
-		&data_word(0xA5F3F689);	# rep movsd
-	&set_label("skip_ecopy");
-
-	&mov	($acc,$s0);
-	&mov	($key,16);
-	&align	(4);
-	&set_label("prefetch_te");
-		&mov	($s0,&DWP(0,"ebp"));
-		&mov	($s1,&DWP(32,"ebp"));
-		&mov	($s2,&DWP(64,"ebp"));
-		&mov	($s3,&DWP(96,"ebp"));
-		&lea	("ebp",&DWP(128,"ebp"));
-		&dec	($key);
-	&jnz	(&label("prefetch_te"));
-	&sub	("ebp",2048);
-
-	&mov	($s2,$_len);
-	&mov	($key,$_ivp);
-	&test	($s2,0xFFFFFFF0);
-	&jz	(&label("enc_tail"));		# short input...
-
-	&mov	($s0,&DWP(0,$key));		# load iv
-	&mov	($s1,&DWP(4,$key));
-
-	&align	(4);
-	&set_label("enc_loop");
-		&mov	($s2,&DWP(8,$key));
-		&mov	($s3,&DWP(12,$key));
-
-		&xor	($s0,&DWP(0,$acc));	# xor input data
-		&xor	($s1,&DWP(4,$acc));
-		&xor	($s2,&DWP(8,$acc));
-		&xor	($s3,&DWP(12,$acc));
-
-		&mov	($key,$_key);		# load key
-		&call	("_x86_AES_encrypt");
-
-		&mov	($acc,$_inp);		# load inp
-		&mov	($key,$_out);		# load out
-
-		&mov	(&DWP(0,$key),$s0);	# save output data
-		&mov	(&DWP(4,$key),$s1);
-		&mov	(&DWP(8,$key),$s2);
-		&mov	(&DWP(12,$key),$s3);
-
-		&mov	($s2,$_len);		# load len
-
-		&lea	($acc,&DWP(16,$acc));
-		&mov	($_inp,$acc);		# save inp
-
-		&lea	($s3,&DWP(16,$key));
-		&mov	($_out,$s3);		# save out
-
-		&sub	($s2,16);
-		&test	($s2,0xFFFFFFF0);
-		&mov	($_len,$s2);		# save len
-	&jnz	(&label("enc_loop"));
-	&test	($s2,15);
-	&jnz	(&label("enc_tail"));
-	&mov	($acc,$_ivp);		# load ivp
-	&mov	($s2,&DWP(8,$key));	# restore last dwords
-	&mov	($s3,&DWP(12,$key));
-	&mov	(&DWP(0,$acc),$s0);	# save ivec
-	&mov	(&DWP(4,$acc),$s1);
-	&mov	(&DWP(8,$acc),$s2);
-	&mov	(&DWP(12,$acc),$s3);
-
-	&cmp	($mark,0);		# was the key schedule copied?
-	&mov	("edi",$_key);
-	&mov	("esp",$_esp);
-	&je	(&label("skip_ezero"));
-	# zero copy of key schedule
-	&mov	("ecx",240/4);
-	&xor	("eax","eax");
-	&align	(4);
-	&data_word(0xABF3F689);	# rep stosd
-	&set_label("skip_ezero")
-	&popf	();
-    &set_label("enc_out");
-	&function_end_A();
-	&pushf	();			# kludge, never executed
-
-    &align	(4);
-    &set_label("enc_tail");
-	&push	($key eq "edi" ? $key : "");	# push ivp
-	&mov	($key,$_out);			# load out
-	&mov	($s1,16);
-	&sub	($s1,$s2);
-	&cmp	($key,$acc);			# compare with inp
-	&je	(&label("enc_in_place"));
-	&align	(4);
-	&data_word(0xA4F3F689);	# rep movsb	# copy input
-	&jmp	(&label("enc_skip_in_place"));
-    &set_label("enc_in_place");
-	&lea	($key,&DWP(0,$key,$s2));
-    &set_label("enc_skip_in_place");
-	&mov	($s2,$s1);
-	&xor	($s0,$s0);
-	&align	(4);
-	&data_word(0xAAF3F689);	# rep stosb	# zero tail
-	&pop	($key);				# pop ivp
-
-	&mov	($acc,$_out);			# output as input
-	&mov	($s0,&DWP(0,$key));
-	&mov	($s1,&DWP(4,$key));
-	&mov	($_len,16);			# len=16
-	&jmp	(&label("enc_loop"));		# one more spin...
-
-#----------------------------- DECRYPT -----------------------------#
-&align	(4);
-&set_label("DECRYPT");
-	&lea    ("ebp",&DWP(&label("AES_Td")."-".&label("pic_point"),"ebp"));
-
-	# allocate aligned stack frame...
-	&lea	($key,&DWP(-64-244,"esp"));
-	&and	($key,-64);
-
-	# ... and make sure it doesn't alias with AES_Td modulo 4096
-	&mov	($s0,"ebp");
-	&lea	($s1,&DWP(2048+256,"ebp"));
-	&mov	($s3,$key);
-	&and	($s0,0xfff);		# s = %ebp&0xfff
-	&and	($s1,0xfff);		# e = (%ebp+2048+256)&0xfff
-	&and	($s3,0xfff);		# p = %esp&0xfff
-
-	&cmp	($s3,$s1);		# if (p>=e) %esp =- (p-e);
-	&jb	(&label("td_break_out"));
-	&sub	($s3,$s1);
-	&sub	($key,$s3);
-	&jmp	(&label("td_ok"));
-	&set_label("td_break_out");	# else %esp -= (p-s)&0xfff + framesz;
-	&sub	($s3,$s0);
-	&and	($s3,0xfff);
-	&add	($s3,64+256);
-	&sub	($key,$s3);
-	&align	(4);
-	&set_label("td_ok");
-
-	&mov	($s0,&wparam(0));	# load inp
-	&mov	($s1,&wparam(1));	# load out
-	&mov	($s3,&wparam(3));	# load key
-	&mov	($acc,&wparam(4));	# load ivp
-
-	&exch	("esp",$key);
-	&add	("esp",4);		# reserve for return address!
-	&mov	($_esp,$key);		# save %esp
-
-	&mov	($_inp,$s0);		# save copy of inp
-	&mov	($_out,$s1);		# save copy of out
-	&mov	($_len,$s2);		# save copy of len
-	&mov	($_key,$s3);		# save copy of key
-	&mov	($_ivp,$acc);		# save copy of ivp
-
-	&mov	($mark,0);		# copy of aes_key->rounds = 0;
-	if ($compromise) {
-		&cmp	($s2,$compromise);
-		&jb	(&label("skip_dcopy"));
-	}
-	# do we copy key schedule to stack?
-	&mov	($s1 eq "ebx" ? $s1 : "",$s3);
-	&mov	($s2 eq "ecx" ? $s2 : "",244/4);
-	&sub	($s1,"ebp");
-	&mov	("esi",$s3);
-	&and	($s1,0xfff);
-	&lea	("edi",$aes_key);
-	&cmp	($s1,2048+256);
-	&jb	(&label("do_dcopy"));
-	&cmp	($s1,4096-244);
-	&jb	(&label("skip_dcopy"));
-	&align	(4);
-	&set_label("do_dcopy");
-		&mov	($_key,"edi");
-		&data_word(0xA5F3F689);	# rep movsd
-	&set_label("skip_dcopy");
-
-	&mov	($acc,$s0);
-	&mov	($key,18);
-	&align	(4);
-	&set_label("prefetch_td");
-		&mov	($s0,&DWP(0,"ebp"));
-		&mov	($s1,&DWP(32,"ebp"));
-		&mov	($s2,&DWP(64,"ebp"));
-		&mov	($s3,&DWP(96,"ebp"));
-		&lea	("ebp",&DWP(128,"ebp"));
-		&dec	($key);
-	&jnz	(&label("prefetch_td"));
-	&sub	("ebp",2048+256);
-
-	&cmp	($acc,$_out);
-	&je	(&label("dec_in_place"));	# in-place processing...
-
-	&mov	($key,$_ivp);		# load ivp
-	&mov	($_tmp,$key);
-
-	&align	(4);
-	&set_label("dec_loop");
-		&mov	($s0,&DWP(0,$acc));	# read input
-		&mov	($s1,&DWP(4,$acc));
-		&mov	($s2,&DWP(8,$acc));
-		&mov	($s3,&DWP(12,$acc));
-
-		&mov	($key,$_key);		# load key
-		&call	("_x86_AES_decrypt");
-
-		&mov	($key,$_tmp);		# load ivp
-		&mov	($acc,$_len);		# load len
-		&xor	($s0,&DWP(0,$key));	# xor iv
-		&xor	($s1,&DWP(4,$key));
-		&xor	($s2,&DWP(8,$key));
-		&xor	($s3,&DWP(12,$key));
-
-		&sub	($acc,16);
-		&jc	(&label("dec_partial"));
-		&mov	($_len,$acc);		# save len
-		&mov	($acc,$_inp);		# load inp
-		&mov	($key,$_out);		# load out
-
-		&mov	(&DWP(0,$key),$s0);	# write output
-		&mov	(&DWP(4,$key),$s1);
-		&mov	(&DWP(8,$key),$s2);
-		&mov	(&DWP(12,$key),$s3);
-
-		&mov	($_tmp,$acc);		# save ivp
-		&lea	($acc,&DWP(16,$acc));
-		&mov	($_inp,$acc);		# save inp
-
-		&lea	($key,&DWP(16,$key));
-		&mov	($_out,$key);		# save out
-
-	&jnz	(&label("dec_loop"));
-	&mov	($key,$_tmp);		# load temp ivp
-    &set_label("dec_end");
-	&mov	($acc,$_ivp);		# load user ivp
-	&mov	($s0,&DWP(0,$key));	# load iv
-	&mov	($s1,&DWP(4,$key));
-	&mov	($s2,&DWP(8,$key));
-	&mov	($s3,&DWP(12,$key));
-	&mov	(&DWP(0,$acc),$s0);	# copy back to user
-	&mov	(&DWP(4,$acc),$s1);
-	&mov	(&DWP(8,$acc),$s2);
-	&mov	(&DWP(12,$acc),$s3);
-	&jmp	(&label("dec_out"));
-
-    &align	(4);
-    &set_label("dec_partial");
-	&lea	($key,$ivec);
-	&mov	(&DWP(0,$key),$s0);	# dump output to stack
-	&mov	(&DWP(4,$key),$s1);
-	&mov	(&DWP(8,$key),$s2);
-	&mov	(&DWP(12,$key),$s3);
-	&lea	($s2 eq "ecx" ? $s2 : "",&DWP(16,$acc));
-	&mov	($acc eq "esi" ? $acc : "",$key);
-	&mov	($key eq "edi" ? $key : "",$_out);	# load out
-	&data_word(0xA4F3F689);	# rep movsb		# copy output
-	&mov	($key,$_inp);				# use inp as temp ivp
-	&jmp	(&label("dec_end"));
-
-    &align	(4);
-    &set_label("dec_in_place");
-	&set_label("dec_in_place_loop");
-		&lea	($key,$ivec);
-		&mov	($s0,&DWP(0,$acc));	# read input
-		&mov	($s1,&DWP(4,$acc));
-		&mov	($s2,&DWP(8,$acc));
-		&mov	($s3,&DWP(12,$acc));
-
-		&mov	(&DWP(0,$key),$s0);	# copy to temp
-		&mov	(&DWP(4,$key),$s1);
-		&mov	(&DWP(8,$key),$s2);
-		&mov	(&DWP(12,$key),$s3);
-
-		&mov	($key,$_key);		# load key
-		&call	("_x86_AES_decrypt");
-
-		&mov	($key,$_ivp);		# load ivp
-		&mov	($acc,$_out);		# load out
-		&xor	($s0,&DWP(0,$key));	# xor iv
-		&xor	($s1,&DWP(4,$key));
-		&xor	($s2,&DWP(8,$key));
-		&xor	($s3,&DWP(12,$key));
-
-		&mov	(&DWP(0,$acc),$s0);	# write output
-		&mov	(&DWP(4,$acc),$s1);
-		&mov	(&DWP(8,$acc),$s2);
-		&mov	(&DWP(12,$acc),$s3);
-
-		&lea	($acc,&DWP(16,$acc));
-		&mov	($_out,$acc);		# save out
-
-		&lea	($acc,$ivec);
-		&mov	($s0,&DWP(0,$acc));	# read temp
-		&mov	($s1,&DWP(4,$acc));
-		&mov	($s2,&DWP(8,$acc));
-		&mov	($s3,&DWP(12,$acc));
-
-		&mov	(&DWP(0,$key),$s0);	# copy iv
-		&mov	(&DWP(4,$key),$s1);
-		&mov	(&DWP(8,$key),$s2);
-		&mov	(&DWP(12,$key),$s3);
-
-		&mov	($acc,$_inp);		# load inp
-
-		&lea	($acc,&DWP(16,$acc));
-		&mov	($_inp,$acc);		# save inp
-
-		&mov	($s2,$_len);		# load len
-		&sub	($s2,16);
-		&jc	(&label("dec_in_place_partial"));
-		&mov	($_len,$s2);		# save len
-	&jnz	(&label("dec_in_place_loop"));
-	&jmp	(&label("dec_out"));
-
-    &align	(4);
-    &set_label("dec_in_place_partial");
-	# one can argue if this is actually required...
-	&mov	($key eq "edi" ? $key : "",$_out);
-	&lea	($acc eq "esi" ? $acc : "",$ivec);
-	&lea	($key,&DWP(0,$key,$s2));
-	&lea	($acc,&DWP(16,$acc,$s2));
-	&neg	($s2 eq "ecx" ? $s2 : "");
-	&data_word(0xA4F3F689);	# rep movsb	# restore tail
-
-    &align	(4);
-    &set_label("dec_out");
-    &cmp	($mark,0);		# was the key schedule copied?
-    &mov	("edi",$_key);
-    &mov	("esp",$_esp);
-    &je		(&label("skip_dzero"));
-    # zero copy of key schedule
-    &mov	("ecx",240/4);
-    &xor	("eax","eax");
-    &align	(4);
-    &data_word(0xABF3F689);	# rep stosd
-    &set_label("skip_dzero")
-    &popf	();
-&function_end("AES_cbc_encrypt");
-}
-
-#------------------------------------------------------------------#
-
-sub enckey()
-{
-	&movz	("esi",&LB("edx"));		# rk[i]>>0
-	&mov	("ebx",&DWP(2,"ebp","esi",8));
-	&movz	("esi",&HB("edx"));		# rk[i]>>8
-	&and	("ebx",0xFF000000);
-	&xor	("eax","ebx");
-
-	&mov	("ebx",&DWP(2,"ebp","esi",8));
-	&shr	("edx",16);
-	&and	("ebx",0x000000FF);
-	&movz	("esi",&LB("edx"));		# rk[i]>>16
-	&xor	("eax","ebx");
-
-	&mov	("ebx",&DWP(0,"ebp","esi",8));
-	&movz	("esi",&HB("edx"));		# rk[i]>>24
-	&and	("ebx",0x0000FF00);
-	&xor	("eax","ebx");
-
-	&mov	("ebx",&DWP(0,"ebp","esi",8));
-	&and	("ebx",0x00FF0000);
-	&xor	("eax","ebx");
-
-	&xor	("eax",&DWP(2048,"ebp","ecx",4));	# rcon
-}
-
-# int AES_set_encrypt_key(const unsigned char *userKey, const int bits,
-#                        AES_KEY *key)
-&public_label("AES_Te");
-&function_begin("AES_set_encrypt_key");
-	&mov	("esi",&wparam(0));		# user supplied key
-	&mov	("edi",&wparam(2));		# private key schedule
-
-	&test	("esi",-1);
-	&jz	(&label("badpointer"));
-	&test	("edi",-1);
-	&jz	(&label("badpointer"));
-
-	&call	(&label("pic_point"));
-	&set_label("pic_point");
-	&blindpop("ebp");
-	&lea	("ebp",&DWP(&label("AES_Te")."-".&label("pic_point"),"ebp"));
-
-	&mov	("ecx",&wparam(1));		# number of bits in key
-	&cmp	("ecx",128);
-	&je	(&label("10rounds"));
-	&cmp	("ecx",192);
-	&je	(&label("12rounds"));
-	&cmp	("ecx",256);
-	&je	(&label("14rounds"));
-	&mov	("eax",-2);			# invalid number of bits
-	&jmp	(&label("exit"));
-
-    &set_label("10rounds");
-	&mov	("eax",&DWP(0,"esi"));		# copy first 4 dwords
-	&mov	("ebx",&DWP(4,"esi"));
-	&mov	("ecx",&DWP(8,"esi"));
-	&mov	("edx",&DWP(12,"esi"));
-	&mov	(&DWP(0,"edi"),"eax");
-	&mov	(&DWP(4,"edi"),"ebx");
-	&mov	(&DWP(8,"edi"),"ecx");
-	&mov	(&DWP(12,"edi"),"edx");
-
-	&xor	("ecx","ecx");
-	&jmp	(&label("10shortcut"));
-
-	&align	(4);
-	&set_label("10loop");
-		&mov	("eax",&DWP(0,"edi"));		# rk[0]
-		&mov	("edx",&DWP(12,"edi"));		# rk[3]
-	&set_label("10shortcut");
-		&enckey	();
-
-		&mov	(&DWP(16,"edi"),"eax");		# rk[4]
-		&xor	("eax",&DWP(4,"edi"));
-		&mov	(&DWP(20,"edi"),"eax");		# rk[5]
-		&xor	("eax",&DWP(8,"edi"));
-		&mov	(&DWP(24,"edi"),"eax");		# rk[6]
-		&xor	("eax",&DWP(12,"edi"));
-		&mov	(&DWP(28,"edi"),"eax");		# rk[7]
-		&inc	("ecx");
-		&add	("edi",16);
-		&cmp	("ecx",10);
-	&jl	(&label("10loop"));
-
-	&mov	(&DWP(80,"edi"),10);		# setup number of rounds
-	&xor	("eax","eax");
-	&jmp	(&label("exit"));
-		
-    &set_label("12rounds");
-	&mov	("eax",&DWP(0,"esi"));		# copy first 6 dwords
-	&mov	("ebx",&DWP(4,"esi"));
-	&mov	("ecx",&DWP(8,"esi"));
-	&mov	("edx",&DWP(12,"esi"));
-	&mov	(&DWP(0,"edi"),"eax");
-	&mov	(&DWP(4,"edi"),"ebx");
-	&mov	(&DWP(8,"edi"),"ecx");
-	&mov	(&DWP(12,"edi"),"edx");
-	&mov	("ecx",&DWP(16,"esi"));
-	&mov	("edx",&DWP(20,"esi"));
-	&mov	(&DWP(16,"edi"),"ecx");
-	&mov	(&DWP(20,"edi"),"edx");
-
-	&xor	("ecx","ecx");
-	&jmp	(&label("12shortcut"));
-
-	&align	(4);
-	&set_label("12loop");
-		&mov	("eax",&DWP(0,"edi"));		# rk[0]
-		&mov	("edx",&DWP(20,"edi"));		# rk[5]
-	&set_label("12shortcut");
-		&enckey	();
-
-		&mov	(&DWP(24,"edi"),"eax");		# rk[6]
-		&xor	("eax",&DWP(4,"edi"));
-		&mov	(&DWP(28,"edi"),"eax");		# rk[7]
-		&xor	("eax",&DWP(8,"edi"));
-		&mov	(&DWP(32,"edi"),"eax");		# rk[8]
-		&xor	("eax",&DWP(12,"edi"));
-		&mov	(&DWP(36,"edi"),"eax");		# rk[9]
-
-		&cmp	("ecx",7);
-		&je	(&label("12break"));
-		&inc	("ecx");
-
-		&xor	("eax",&DWP(16,"edi"));
-		&mov	(&DWP(40,"edi"),"eax");		# rk[10]
-		&xor	("eax",&DWP(20,"edi"));
-		&mov	(&DWP(44,"edi"),"eax");		# rk[11]
-
-		&add	("edi",24);
-	&jmp	(&label("12loop"));
-
-	&set_label("12break");
-	&mov	(&DWP(72,"edi"),12);		# setup number of rounds
-	&xor	("eax","eax");
-	&jmp	(&label("exit"));
-
-    &set_label("14rounds");
-	&mov	("eax",&DWP(0,"esi"));		# copy first 8 dwords
-	&mov	("ebx",&DWP(4,"esi"));
-	&mov	("ecx",&DWP(8,"esi"));
-	&mov	("edx",&DWP(12,"esi"));
-	&mov	(&DWP(0,"edi"),"eax");
-	&mov	(&DWP(4,"edi"),"ebx");
-	&mov	(&DWP(8,"edi"),"ecx");
-	&mov	(&DWP(12,"edi"),"edx");
-	&mov	("eax",&DWP(16,"esi"));
-	&mov	("ebx",&DWP(20,"esi"));
-	&mov	("ecx",&DWP(24,"esi"));
-	&mov	("edx",&DWP(28,"esi"));
-	&mov	(&DWP(16,"edi"),"eax");
-	&mov	(&DWP(20,"edi"),"ebx");
-	&mov	(&DWP(24,"edi"),"ecx");
-	&mov	(&DWP(28,"edi"),"edx");
-
-	&xor	("ecx","ecx");
-	&jmp	(&label("14shortcut"));
-
-	&align	(4);
-	&set_label("14loop");
-		&mov	("edx",&DWP(28,"edi"));		# rk[7]
-	&set_label("14shortcut");
-		&mov	("eax",&DWP(0,"edi"));		# rk[0]
-
-		&enckey	();
-
-		&mov	(&DWP(32,"edi"),"eax");		# rk[8]
-		&xor	("eax",&DWP(4,"edi"));
-		&mov	(&DWP(36,"edi"),"eax");		# rk[9]
-		&xor	("eax",&DWP(8,"edi"));
-		&mov	(&DWP(40,"edi"),"eax");		# rk[10]
-		&xor	("eax",&DWP(12,"edi"));
-		&mov	(&DWP(44,"edi"),"eax");		# rk[11]
-
-		&cmp	("ecx",6);
-		&je	(&label("14break"));
-		&inc	("ecx");
-
-		&mov	("edx","eax");
-		&mov	("eax",&DWP(16,"edi"));		# rk[4]
-		&movz	("esi",&LB("edx"));		# rk[11]>>0
-		&mov	("ebx",&DWP(2,"ebp","esi",8));
-		&movz	("esi",&HB("edx"));		# rk[11]>>8
-		&and	("ebx",0x000000FF);
-		&xor	("eax","ebx");
-
-		&mov	("ebx",&DWP(0,"ebp","esi",8));
-		&shr	("edx",16);
-		&and	("ebx",0x0000FF00);
-		&movz	("esi",&LB("edx"));		# rk[11]>>16
-		&xor	("eax","ebx");
-
-		&mov	("ebx",&DWP(0,"ebp","esi",8));
-		&movz	("esi",&HB("edx"));		# rk[11]>>24
-		&and	("ebx",0x00FF0000);
-		&xor	("eax","ebx");
-
-		&mov	("ebx",&DWP(2,"ebp","esi",8));
-		&and	("ebx",0xFF000000);
-		&xor	("eax","ebx");
-
-		&mov	(&DWP(48,"edi"),"eax");		# rk[12]
-		&xor	("eax",&DWP(20,"edi"));
-		&mov	(&DWP(52,"edi"),"eax");		# rk[13]
-		&xor	("eax",&DWP(24,"edi"));
-		&mov	(&DWP(56,"edi"),"eax");		# rk[14]
-		&xor	("eax",&DWP(28,"edi"));
-		&mov	(&DWP(60,"edi"),"eax");		# rk[15]
-
-		&add	("edi",32);
-	&jmp	(&label("14loop"));
-
-	&set_label("14break");
-	&mov	(&DWP(48,"edi"),14);		# setup number of rounds
-	&xor	("eax","eax");
-	&jmp	(&label("exit"));
-
-    &set_label("badpointer");
-	&mov	("eax",-1);
-    &set_label("exit");
-&function_end("AES_set_encrypt_key");
-
-sub deckey()
-{ my ($i,$ptr,$te,$td) = @_;
-
-	&mov	("eax",&DWP($i,$ptr));
-	&mov	("edx","eax");
-	&movz	("ebx",&HB("eax"));
-	&shr	("edx",16);
-	&and	("eax",0xFF);
-	&movz	("eax",&BP(2,$te,"eax",8));
-	&movz	("ebx",&BP(2,$te,"ebx",8));
-	&mov	("eax",&DWP(0,$td,"eax",8));
-	&xor	("eax",&DWP(3,$td,"ebx",8));
-	&movz	("ebx",&HB("edx"));
-	&and	("edx",0xFF);
-	&movz	("edx",&BP(2,$te,"edx",8));
-	&movz	("ebx",&BP(2,$te,"ebx",8));
-	&xor	("eax",&DWP(2,$td,"edx",8));
-	&xor	("eax",&DWP(1,$td,"ebx",8));
-	&mov	(&DWP($i,$ptr),"eax");
-}
-
-# int AES_set_decrypt_key(const unsigned char *userKey, const int bits,
-#                        AES_KEY *key)
-&public_label("AES_Td");
-&public_label("AES_Te");
-&function_begin_B("AES_set_decrypt_key");
-	&mov	("eax",&wparam(0));
-	&mov	("ecx",&wparam(1));
-	&mov	("edx",&wparam(2));
-	&sub	("esp",12);
-	&mov	(&DWP(0,"esp"),"eax");
-	&mov	(&DWP(4,"esp"),"ecx");
-	&mov	(&DWP(8,"esp"),"edx");
-	&call	("AES_set_encrypt_key");
-	&add	("esp",12);
-	&cmp	("eax",0);
-	&je	(&label("proceed"));
-	&ret	();
-
-    &set_label("proceed");
-	&push	("ebp");
-	&push	("ebx");
-	&push	("esi");
-	&push	("edi");
-
-	&mov	("esi",&wparam(2));
-	&mov	("ecx",&DWP(240,"esi"));	# pull number of rounds
-	&lea	("ecx",&DWP(0,"","ecx",4));
-	&lea	("edi",&DWP(0,"esi","ecx",4));	# pointer to last chunk
-
-	&align	(4);
-	&set_label("invert");			# invert order of chunks
-		&mov	("eax",&DWP(0,"esi"));
-		&mov	("ebx",&DWP(4,"esi"));
-		&mov	("ecx",&DWP(0,"edi"));
-		&mov	("edx",&DWP(4,"edi"));
-		&mov	(&DWP(0,"edi"),"eax");
-		&mov	(&DWP(4,"edi"),"ebx");
-		&mov	(&DWP(0,"esi"),"ecx");
-		&mov	(&DWP(4,"esi"),"edx");
-		&mov	("eax",&DWP(8,"esi"));
-		&mov	("ebx",&DWP(12,"esi"));
-		&mov	("ecx",&DWP(8,"edi"));
-		&mov	("edx",&DWP(12,"edi"));
-		&mov	(&DWP(8,"edi"),"eax");
-		&mov	(&DWP(12,"edi"),"ebx");
-		&mov	(&DWP(8,"esi"),"ecx");
-		&mov	(&DWP(12,"esi"),"edx");
-		&add	("esi",16);
-		&sub	("edi",16);
-		&cmp	("esi","edi");
-	&jne	(&label("invert"));
-
-	&call	(&label("pic_point"));
-	&set_label("pic_point");
-	blindpop("ebp");
-	&lea	("edi",&DWP(&label("AES_Td")."-".&label("pic_point"),"ebp"));
-	&lea	("ebp",&DWP(&label("AES_Te")."-".&label("pic_point"),"ebp"));
-
-	&mov	("esi",&wparam(2));
-	&mov	("ecx",&DWP(240,"esi"));	# pull number of rounds
-	&dec	("ecx");
-	&align	(4);
-	&set_label("permute");			# permute the key schedule
-		&add	("esi",16);
-		&deckey	(0,"esi","ebp","edi");
-		&deckey	(4,"esi","ebp","edi");
-		&deckey	(8,"esi","ebp","edi");
-		&deckey	(12,"esi","ebp","edi");
-		&dec	("ecx");
-	&jnz	(&label("permute"));
-
-	&xor	("eax","eax");			# return success
-&function_end("AES_set_decrypt_key");
-
-&asm_finish();
diff --git a/crypto/openssl/crypto/aes/asm/aes-ia64.S b/crypto/openssl/crypto/aes/asm/aes-ia64.S
deleted file mode 100644
index 542cf335e995..000000000000
--- a/crypto/openssl/crypto/aes/asm/aes-ia64.S
+++ /dev/null
@@ -1,1652 +0,0 @@
-// ====================================================================
-// Written by Andy Polyakov <appro@fy.chalmers.se> for the OpenSSL
-// project. Rights for redistribution and usage in source and binary
-// forms are granted according to the OpenSSL license.
-// ====================================================================
-//
-// What's wrong with compiler generated code? Compiler never uses
-// variable 'shr' which is pairable with 'extr'/'dep' instructions.
-// Then it uses 'zxt' which is an I-type, but can be replaced with
-// 'and' which in turn can be assigned to M-port [there're double as
-// much M-ports as there're I-ports on Itanium 2]. By sacrificing few
-// registers for small constants (255, 24 and 16) to be used with
-// 'shr' and 'and' instructions I can achieve better ILP, Intruction
-// Level Parallelism, and performance. This code outperforms GCC 3.3
-// generated code by over factor of 2 (two), GCC 3.4 - by 70% and
-// HP C - by 40%. Measured best-case scenario, i.e. aligned
-// big-endian input, ECB timing on Itanium 2 is (18 + 13*rounds)
-// ticks per block, or 9.25 CPU cycles per byte for 128 bit key.
-
-.ident	"aes-ia64.S, version 1.1"
-.ident	"IA-64 ISA artwork by Andy Polyakov <appro@fy.chalmers.se>"
-.explicit
-.text
-
-rk0=r8;     rk1=r9;
-
-prsave=r10;
-maskff=r11;
-twenty4=r14;
-sixteen=r15;
-
-te00=r16;   te11=r17;   te22=r18;   te33=r19;
-te01=r20;   te12=r21;   te23=r22;   te30=r23;
-te02=r24;   te13=r25;   te20=r26;   te31=r27;
-te03=r28;   te10=r29;   te21=r30;   te32=r31;
-
-// these are rotating...
-t0=r32;     s0=r33;
-t1=r34;     s1=r35;
-t2=r36;     s2=r37;
-t3=r38;     s3=r39;
-
-te0=r40;    te1=r41;    te2=r42;    te3=r43;
-
-#if defined(_HPUX_SOURCE) && !defined(_LP64)
-# define ADDP	addp4
-# define KSZ	4
-# define LDKEY	ld4
-#else
-# define ADDP	add
-#endif
-
-// This implies that AES_KEY comprises 32-bit key schedule elements
-// even on LP64 platforms.
-#ifndef	KSZ
-# define KSZ	4
-# define LDKEY	ld4
-#endif
-
-.proc	_ia64_AES_encrypt#
-// Input:	rk0-rk1
-//		te0
-//		te3	as AES_KEY->rounds!!!
-//		s0-s3
-//		maskff,twenty4,sixteen
-// Output:	r16,r20,r24,r28 as s0-s3
-// Clobber:	r16-r31,rk0-rk1,r32-r43
-.align	32
-_ia64_AES_encrypt:
-{ .mmi;	alloc	r16=ar.pfs,12,0,0,8
-	LDKEY	t0=[rk0],2*KSZ
-	mov	pr.rot=1<<16	}
-{ .mmi;	LDKEY	t1=[rk1],2*KSZ
-	add	te1=1024,te0
-	add	te3=-3,te3	};;
-{ .mib;	LDKEY	t2=[rk0],2*KSZ
-	mov	ar.ec=3		}
-{ .mib;	LDKEY	t3=[rk1],2*KSZ
-	add	te2=2048,te0
-	brp.loop.imp	.Le_top,.Le_end-16	};;
-
-{ .mmi;	xor	s0=s0,t0
-	xor	s1=s1,t1
-	mov	ar.lc=te3	}
-{ .mmi;	xor	s2=s2,t2
-	xor	s3=s3,t3
-	add	te3=3072,te0	};;
-
-.align	32
-.Le_top:
-{ .mmi;	(p0)	LDKEY	t0=[rk0],2*KSZ		// 0/0:rk[0]
-	(p0)	and	te33=s3,maskff		// 0/0:s3&0xff
-	(p0)	extr.u	te22=s2,8,8	}	// 0/0:s2>>8&0xff
-{ .mmi; (p0)	LDKEY	t1=[rk1],2*KSZ		// 0/1:rk[1]
-	(p0)	and	te30=s0,maskff		// 0/1:s0&0xff
-	(p0)	shr.u	te00=s0,twenty4	};;	// 0/0:s0>>24
-{ .mmi;	(p0)	LDKEY	t2=[rk0],2*KSZ		// 1/2:rk[2]
-	(p0)	shladd	te33=te33,2,te3		// 1/0:te0+s0>>24
-	(p0)	extr.u	te23=s3,8,8	}	// 1/1:s3>>8&0xff
-{ .mmi;	(p0)	LDKEY	t3=[rk1],2*KSZ		// 1/3:rk[3]
-	(p0)	shladd	te30=te30,2,te3		// 1/1:te3+s0
-	(p0)	shr.u	te01=s1,twenty4	};;	// 1/1:s1>>24
-{ .mmi;	(p0)	ld4	te33=[te33]		// 2/0:te3[s3&0xff]
-	(p0)	shladd	te22=te22,2,te2		// 2/0:te2+s2>>8&0xff
-	(p0)	extr.u	te20=s0,8,8	}	// 2/2:s0>>8&0xff
-{ .mmi;	(p0)	ld4	te30=[te30]		// 2/1:te3[s0]
-	(p0)	shladd	te23=te23,2,te2		// 2/1:te2+s3>>8
-	(p0)	shr.u	te02=s2,twenty4	};;	// 2/2:s2>>24
-{ .mmi;	(p0)	ld4	te22=[te22]		// 3/0:te2[s2>>8]
-	(p0)	shladd	te20=te20,2,te2		// 3/2:te2+s0>>8
-	(p0)	extr.u	te21=s1,8,8	}	// 3/3:s1>>8&0xff
-{ .mmi;	(p0)	ld4	te23=[te23]		// 3/1:te2[s3>>8]
-	(p0)	shladd	te00=te00,2,te0		// 3/0:te0+s0>>24
-	(p0)	shr.u	te03=s3,twenty4	};;	// 3/3:s3>>24
-{ .mmi;	(p0)	ld4	te20=[te20]		// 4/2:te2[s0>>8]
-	(p0)	shladd	te21=te21,2,te2		// 4/3:te3+s2
-	(p0)	extr.u	te11=s1,16,8	}	// 4/0:s1>>16&0xff
-{ .mmi;	(p0)	ld4	te00=[te00]		// 4/0:te0[s0>>24]
-	(p0)	shladd	te01=te01,2,te0		// 4/1:te0+s1>>24
-	(p0)	shr.u	te13=s3,sixteen	};;	// 4/2:s3>>16
-{ .mmi;	(p0)	ld4	te21=[te21]		// 5/3:te2[s1>>8]
-	(p0)	shladd	te11=te11,2,te1		// 5/0:te1+s1>>16
-	(p0)	extr.u	te12=s2,16,8	}	// 5/1:s2>>16&0xff
-{ .mmi;	(p0)	ld4	te01=[te01]		// 5/1:te0[s1>>24]
-	(p0)	shladd	te02=te02,2,te0		// 5/2:te0+s2>>24
-	(p0)	and	te31=s1,maskff	};;	// 5/2:s1&0xff
-
-{ .mmi;	(p0)	ld4	te11=[te11]		// 6/0:te1[s1>>16]
-	(p0)	shladd	te12=te12,2,te1		// 6/1:te1+s2>>16
-	(p0)	extr.u	te10=s0,16,8	}	// 6/3:s0>>16&0xff
-{ .mmi;	(p0)	ld4	te02=[te02]		// 6/2:te0[s2>>24]
-	(p0)	shladd	te03=te03,2,te0		// 6/3:te1+s0>>16
-	(p0)	and	te32=s2,maskff	};;	// 6/3:s2&0xff
-{ .mmi;	(p0)	ld4	te12=[te12]		// 7/1:te1[s2>>16]
-	(p0)	shladd	te31=te31,2,te3		// 7/2:te3+s1&0xff
-	(p0)	and	te13=te13,maskff}	// 7/2:s3>>16&0xff
-{ .mmi;	(p0)	ld4	te03=[te03]		// 7/3:te0[s3>>24]
-	(p0)	shladd	te32=te32,2,te3		// 7/3:te3+s2
-	(p0)	xor	t0=t0,te33	};;	// 7/0:
-{ .mmi;	(p0)	ld4	te31=[te31]		// 8/2:te3[s1]
-	(p0)	shladd	te13=te13,2,te1		// 8/2:te1+s3>>16
-	(p0)	xor	t0=t0,te22	}	// 8/0:
-{ .mmi;	(p0)	ld4	te32=[te32]		// 8/3:te3[s2]
-	(p0)	shladd	te10=te10,2,te1		// 8/3:te1+s0>>16
-	(p0)	xor	t1=t1,te30	};;	// 8/1:
-{ .mmi;	(p0)	ld4	te13=[te13]		// 9/2:te1[s3>>16]
-	(p0)	xor	t0=t0,te00		// 9/0:
-	(p0)	xor	t1=t1,te23	}	// 9/1:		
-{ .mmi;	(p0)	ld4	te10=[te10]		// 9/3:te1[s0>>16]
-	(p0)	xor	t2=t2,te20		// 9/2:
-	(p0)	xor	t3=t3,te21	};;	// 9/3:
-{ .mmi;	(p0)	xor	t0=t0,te11		// 10/0:done!
-	(p0)	xor	t1=t1,te01		// 10/1:
-	(p0)	xor	t2=t2,te02	}	// 10/2:
-{ .mmi;	(p0)	xor	t3=t3,te03		// 10/3:
-	(p16)	cmp.eq	p0,p17=r0,r0 	};;	// 10/clear (p17)
-{ .mmi;	(p0)	xor	t1=t1,te12		// 11/1:done!
-	(p0)	xor	t2=t2,te31		// 11/2:
-	(p0)	xor	t3=t3,te32	}	// 11/3:
-{ .mmi;	(p17)	add	te0=4096,te0		// 11/	
-	(p17)	add	te1=4096,te1	};;	// 11/
-{ .mib;	(p0)	xor	t2=t2,te13		// 12/2:done!
-	(p0)	xor	t3=t3,te10	}	// 12/3:done!
-{ .mib;	(p17)	add	te2=4096,te2		// 12/
-	(p17)	add	te3=4096,te3		// 12/
-	br.ctop.sptk	.Le_top		};;
-.Le_end:
-{ .mib;	mov	r16=s0
-	mov	r20=s1			}
-{ .mib;	mov	r24=s2
-	mov	r28=s3
-	br.ret.sptk	b6		};;
-.endp	_ia64_AES_encrypt#
-
-// void AES_encrypt (const void *in,void *out,const AES_KEY *key);
-.global	AES_encrypt#
-.proc	AES_encrypt#
-.align	32
-.skip	16
-AES_encrypt:
-	.prologue
-	.fframe	0
-	.save	ar.pfs,r2
-	.save	ar.lc,r3
-{ .mmi;	alloc	r2=ar.pfs,3,0,12,0
-	addl	out8=@ltoff(AES_Te#),gp
-	mov	r3=ar.lc		}
-{ .mmi;	and	out0=3,in0
-	ADDP	in0=0,in0
-	ADDP	out11=KSZ*60,in2	};;	// &AES_KEY->rounds
-
-	.body
-{ .mmi;	ld8	out8=[out8]			// Te0
-	ld4	out11=[out11]			// AES_KEY->rounds
-	mov	prsave=pr		}
-
-#if defined(_HPUX_SOURCE)	// HPUX is big-endian, cut 15+15 cycles...
-{ .mib; cmp.ne	p6,p0=out0,r0
-	add	out0=4,in0
-(p6)	br.dpnt.many	.Le_i_unaligned	};;
-
-{ .mmi;	ld4	out1=[in0],8		// s0
-	and	out9=3,in1
-	mov	twenty4=24		}
-{ .mmi;	ld4	out3=[out0],8		// s1
-	ADDP	rk0=0,in2
-	mov	sixteen=16		};;
-{ .mmi;	ld4	out5=[in0]		// s2
-	cmp.ne	p6,p0=out9,r0
-	mov	maskff=0xff		}
-{ .mmb;	ld4	out7=[out0]		// s3
-	ADDP	rk1=KSZ,in2
-	br.call.sptk.many	b6=_ia64_AES_encrypt	};;
-
-{ .mib;	ADDP	in0=4,in1
-	ADDP	in1=0,in1
-(p6)	br.spnt	.Le_o_unaligned		};;
-
-{ .mii;	mov	ar.pfs=r2
-	mov	ar.lc=r3		}
-{ .mmi;	st4	[in1]=r16,8		// s0
-	st4	[in0]=r20,8		// s1
-	mov	pr=prsave,0x1ffff	};;
-{ .mmb;	st4	[in1]=r24		// s2
-	st4	[in0]=r28		// s3
-	br.ret.sptk.many	b0	};;
-#endif
-
-.align	32
-.Le_i_unaligned:
-{ .mmi;	add	out0=1,in0
-	add	out2=2,in0
-	add	out4=3,in0	};;
-{ .mmi;	ld1	r16=[in0],4
-	ld1	r17=[out0],4	}//;;
-{ .mmi;	ld1	r18=[out2],4
-	ld1	out1=[out4],4	};;	// s0
-{ .mmi;	ld1	r20=[in0],4
-	ld1	r21=[out0],4	}//;;
-{ .mmi;	ld1	r22=[out2],4
-	ld1	out3=[out4],4	};;	// s1
-{ .mmi;	ld1	r24=[in0],4
-	ld1	r25=[out0],4	}//;;
-{ .mmi;	ld1	r26=[out2],4
-	ld1	out5=[out4],4	};;	// s2
-{ .mmi;	ld1	r28=[in0]
-	ld1	r29=[out0]	}//;;
-{ .mmi;	ld1	r30=[out2]
-	ld1	out7=[out4]	};;	// s3
-
-{ .mii;
-	dep	out1=r16,out1,24,8	//;;
-	dep	out3=r20,out3,24,8	}//;;
-{ .mii;	ADDP	rk0=0,in2
-	dep	out5=r24,out5,24,8	//;;
-	dep	out7=r28,out7,24,8	};;
-{ .mii;	ADDP	rk1=KSZ,in2
-	dep	out1=r17,out1,16,8	//;;
-	dep	out3=r21,out3,16,8	}//;;
-{ .mii;	mov	twenty4=24
-	dep	out5=r25,out5,16,8	//;;
-	dep	out7=r29,out7,16,8	};;
-{ .mii;	mov	sixteen=16
-	dep	out1=r18,out1,8,8	//;;
-	dep	out3=r22,out3,8,8	}//;;
-{ .mii;	mov	maskff=0xff
-	dep	out5=r26,out5,8,8	//;;
-	dep	out7=r30,out7,8,8	};;
-
-{ .mib;	br.call.sptk.many	b6=_ia64_AES_encrypt	};;
-
-.Le_o_unaligned:
-{ .mii;	ADDP	out0=0,in1
-	extr.u	r17=r16,8,8			// s0
-	shr.u	r19=r16,twenty4		}//;;
-{ .mii;	ADDP	out1=1,in1
-	extr.u	r18=r16,16,8
-	shr.u	r23=r20,twenty4		}//;;	// s1
-{ .mii;	ADDP	out2=2,in1
-	extr.u	r21=r20,8,8
-	shr.u	r22=r20,sixteen	}//;;
-{ .mii;	ADDP	out3=3,in1
-	extr.u	r25=r24,8,8			// s2
-	shr.u	r27=r24,twenty4		};;
-{ .mii;	st1	[out3]=r16,4
-	extr.u	r26=r24,16,8
-	shr.u	r31=r28,twenty4	}//;;	// s3
-{ .mii;	st1	[out2]=r17,4
-	extr.u	r29=r28,8,8
-	shr.u	r30=r28,sixteen		}//;;
-
-{ .mmi;	st1	[out1]=r18,4
-	st1	[out0]=r19,4		};;
-{ .mmi;	st1	[out3]=r20,4
-	st1	[out2]=r21,4		}//;;
-{ .mmi;	st1	[out1]=r22,4
-	st1	[out0]=r23,4		};;
-{ .mmi;	st1	[out3]=r24,4
-	st1	[out2]=r25,4
-	mov	pr=prsave,0x1ffff	}//;;
-{ .mmi;	st1	[out1]=r26,4
-	st1	[out0]=r27,4
-	mov	ar.pfs=r2		};;
-{ .mmi;	st1	[out3]=r28
-	st1	[out2]=r29
-	mov	ar.lc=r3		}//;;
-{ .mmb;	st1	[out1]=r30
-	st1	[out0]=r31
-	br.ret.sptk.many	b0	};;
-.endp	AES_encrypt#
-
-// *AES_decrypt are autogenerated by the following script:
-#if 0
-#!/usr/bin/env perl
-print "// *AES_decrypt are autogenerated by the following script:\n#if 0\n";
-open(PROG,'<'.$0); while(<PROG>) { print; } close(PROG);
-print "#endif\n";
-while(<>) {
-	$process=1	if (/\.proc\s+_ia64_AES_encrypt/);
-	next		if (!$process);
-
-	#s/te00=s0/td00=s0/;	s/te00/td00/g;
-	s/te11=s1/td13=s3/;	s/te11/td13/g;
-	#s/te22=s2/td22=s2/;	s/te22/td22/g;
-	s/te33=s3/td31=s1/;	s/te33/td31/g;
-
-	#s/te01=s1/td01=s1/;	s/te01/td01/g;
-	s/te12=s2/td10=s0/;	s/te12/td10/g;
-	#s/te23=s3/td23=s3/;	s/te23/td23/g;
-	s/te30=s0/td32=s2/;	s/te30/td32/g;
-
-	#s/te02=s2/td02=s2/;	s/te02/td02/g;
-	s/te13=s3/td11=s1/;	s/te13/td11/g;
-	#s/te20=s0/td20=s0/;	s/te20/td20/g;
-	s/te31=s1/td33=s3/;	s/te31/td33/g;
-
-	#s/te03=s3/td03=s3/;	s/te03/td03/g;
-	s/te10=s0/td12=s2/;	s/te10/td12/g;
-	#s/te21=s1/td21=s1/;	s/te21/td21/g;
-	s/te32=s2/td30=s0/;	s/te32/td30/g;
-
-	s/td/te/g;
-
-	s/AES_encrypt/AES_decrypt/g;
-	s/\.Le_/.Ld_/g;
-	s/AES_Te#/AES_Td#/g;
-
-	print;
-
-	exit		if (/\.endp\s+AES_decrypt/);
-}
-#endif
-.proc	_ia64_AES_decrypt#
-// Input:	rk0-rk1
-//		te0
-//		te3	as AES_KEY->rounds!!!
-//		s0-s3
-//		maskff,twenty4,sixteen
-// Output:	r16,r20,r24,r28 as s0-s3
-// Clobber:	r16-r31,rk0-rk1,r32-r43
-.align	32
-_ia64_AES_decrypt:
-{ .mmi;	alloc	r16=ar.pfs,12,0,0,8
-	LDKEY	t0=[rk0],2*KSZ
-	mov	pr.rot=1<<16	}
-{ .mmi;	LDKEY	t1=[rk1],2*KSZ
-	add	te1=1024,te0
-	add	te3=-3,te3	};;
-{ .mib;	LDKEY	t2=[rk0],2*KSZ
-	mov	ar.ec=3		}
-{ .mib;	LDKEY	t3=[rk1],2*KSZ
-	add	te2=2048,te0
-	brp.loop.imp	.Ld_top,.Ld_end-16	};;
-
-{ .mmi;	xor	s0=s0,t0
-	xor	s1=s1,t1
-	mov	ar.lc=te3	}
-{ .mmi;	xor	s2=s2,t2
-	xor	s3=s3,t3
-	add	te3=3072,te0	};;
-
-.align	32
-.Ld_top:
-{ .mmi;	(p0)	LDKEY	t0=[rk0],2*KSZ		// 0/0:rk[0]
-	(p0)	and	te31=s1,maskff		// 0/0:s3&0xff
-	(p0)	extr.u	te22=s2,8,8	}	// 0/0:s2>>8&0xff
-{ .mmi; (p0)	LDKEY	t1=[rk1],2*KSZ		// 0/1:rk[1]
-	(p0)	and	te32=s2,maskff		// 0/1:s0&0xff
-	(p0)	shr.u	te00=s0,twenty4	};;	// 0/0:s0>>24
-{ .mmi;	(p0)	LDKEY	t2=[rk0],2*KSZ		// 1/2:rk[2]
-	(p0)	shladd	te31=te31,2,te3		// 1/0:te0+s0>>24
-	(p0)	extr.u	te23=s3,8,8	}	// 1/1:s3>>8&0xff
-{ .mmi;	(p0)	LDKEY	t3=[rk1],2*KSZ		// 1/3:rk[3]
-	(p0)	shladd	te32=te32,2,te3		// 1/1:te3+s0
-	(p0)	shr.u	te01=s1,twenty4	};;	// 1/1:s1>>24
-{ .mmi;	(p0)	ld4	te31=[te31]		// 2/0:te3[s3&0xff]
-	(p0)	shladd	te22=te22,2,te2		// 2/0:te2+s2>>8&0xff
-	(p0)	extr.u	te20=s0,8,8	}	// 2/2:s0>>8&0xff
-{ .mmi;	(p0)	ld4	te32=[te32]		// 2/1:te3[s0]
-	(p0)	shladd	te23=te23,2,te2		// 2/1:te2+s3>>8
-	(p0)	shr.u	te02=s2,twenty4	};;	// 2/2:s2>>24
-{ .mmi;	(p0)	ld4	te22=[te22]		// 3/0:te2[s2>>8]
-	(p0)	shladd	te20=te20,2,te2		// 3/2:te2+s0>>8
-	(p0)	extr.u	te21=s1,8,8	}	// 3/3:s1>>8&0xff
-{ .mmi;	(p0)	ld4	te23=[te23]		// 3/1:te2[s3>>8]
-	(p0)	shladd	te00=te00,2,te0		// 3/0:te0+s0>>24
-	(p0)	shr.u	te03=s3,twenty4	};;	// 3/3:s3>>24
-{ .mmi;	(p0)	ld4	te20=[te20]		// 4/2:te2[s0>>8]
-	(p0)	shladd	te21=te21,2,te2		// 4/3:te3+s2
-	(p0)	extr.u	te13=s3,16,8	}	// 4/0:s1>>16&0xff
-{ .mmi;	(p0)	ld4	te00=[te00]		// 4/0:te0[s0>>24]
-	(p0)	shladd	te01=te01,2,te0		// 4/1:te0+s1>>24
-	(p0)	shr.u	te11=s1,sixteen	};;	// 4/2:s3>>16
-{ .mmi;	(p0)	ld4	te21=[te21]		// 5/3:te2[s1>>8]
-	(p0)	shladd	te13=te13,2,te1		// 5/0:te1+s1>>16
-	(p0)	extr.u	te10=s0,16,8	}	// 5/1:s2>>16&0xff
-{ .mmi;	(p0)	ld4	te01=[te01]		// 5/1:te0[s1>>24]
-	(p0)	shladd	te02=te02,2,te0		// 5/2:te0+s2>>24
-	(p0)	and	te33=s3,maskff	};;	// 5/2:s1&0xff
-
-{ .mmi;	(p0)	ld4	te13=[te13]		// 6/0:te1[s1>>16]
-	(p0)	shladd	te10=te10,2,te1		// 6/1:te1+s2>>16
-	(p0)	extr.u	te12=s2,16,8	}	// 6/3:s0>>16&0xff
-{ .mmi;	(p0)	ld4	te02=[te02]		// 6/2:te0[s2>>24]
-	(p0)	shladd	te03=te03,2,te0		// 6/3:te1+s0>>16
-	(p0)	and	te30=s0,maskff	};;	// 6/3:s2&0xff
-{ .mmi;	(p0)	ld4	te10=[te10]		// 7/1:te1[s2>>16]
-	(p0)	shladd	te33=te33,2,te3		// 7/2:te3+s1&0xff
-	(p0)	and	te11=te11,maskff}	// 7/2:s3>>16&0xff
-{ .mmi;	(p0)	ld4	te03=[te03]		// 7/3:te0[s3>>24]
-	(p0)	shladd	te30=te30,2,te3		// 7/3:te3+s2
-	(p0)	xor	t0=t0,te31	};;	// 7/0:
-{ .mmi;	(p0)	ld4	te33=[te33]		// 8/2:te3[s1]
-	(p0)	shladd	te11=te11,2,te1		// 8/2:te1+s3>>16
-	(p0)	xor	t0=t0,te22	}	// 8/0:
-{ .mmi;	(p0)	ld4	te30=[te30]		// 8/3:te3[s2]
-	(p0)	shladd	te12=te12,2,te1		// 8/3:te1+s0>>16
-	(p0)	xor	t1=t1,te32	};;	// 8/1:
-{ .mmi;	(p0)	ld4	te11=[te11]		// 9/2:te1[s3>>16]
-	(p0)	xor	t0=t0,te00		// 9/0:
-	(p0)	xor	t1=t1,te23	}	// 9/1:		
-{ .mmi;	(p0)	ld4	te12=[te12]		// 9/3:te1[s0>>16]
-	(p0)	xor	t2=t2,te20		// 9/2:
-	(p0)	xor	t3=t3,te21	};;	// 9/3:
-{ .mmi;	(p0)	xor	t0=t0,te13		// 10/0:done!
-	(p0)	xor	t1=t1,te01		// 10/1:
-	(p0)	xor	t2=t2,te02	}	// 10/2:
-{ .mmi;	(p0)	xor	t3=t3,te03		// 10/3:
-	(p16)	cmp.eq	p0,p17=r0,r0 	};;	// 10/clear (p17)
-{ .mmi;	(p0)	xor	t1=t1,te10		// 11/1:done!
-	(p0)	xor	t2=t2,te33		// 11/2:
-	(p0)	xor	t3=t3,te30	}	// 11/3:
-{ .mmi;	(p17)	add	te0=4096,te0		// 11/	
-	(p17)	add	te1=4096,te1	};;	// 11/
-{ .mib;	(p0)	xor	t2=t2,te11		// 12/2:done!
-	(p0)	xor	t3=t3,te12	}	// 12/3:done!
-{ .mib;	(p17)	add	te2=4096,te2		// 12/
-	(p17)	add	te3=4096,te3		// 12/
-	br.ctop.sptk	.Ld_top		};;
-.Ld_end:
-{ .mib;	mov	r16=s0
-	mov	r20=s1			}
-{ .mib;	mov	r24=s2
-	mov	r28=s3
-	br.ret.sptk	b6		};;
-.endp	_ia64_AES_decrypt#
-
-// void AES_decrypt (const void *in,void *out,const AES_KEY *key);
-.global	AES_decrypt#
-.proc	AES_decrypt#
-.align	32
-.skip	16
-AES_decrypt:
-	.prologue
-	.fframe	0
-	.save	ar.pfs,r2
-	.save	ar.lc,r3
-{ .mmi;	alloc	r2=ar.pfs,3,0,12,0
-	addl	out8=@ltoff(AES_Td#),gp
-	mov	r3=ar.lc		}
-{ .mmi;	and	out0=3,in0
-	ADDP	in0=0,in0
-	ADDP	out11=KSZ*60,in2	};;	// &AES_KEY->rounds
-
-	.body
-{ .mmi;	ld8	out8=[out8]			// Te0
-	ld4	out11=[out11]			// AES_KEY->rounds
-	mov	prsave=pr		}
-
-#if defined(_HPUX_SOURCE)	// HPUX is big-endian, cut 15+15 cycles...
-{ .mib; cmp.ne	p6,p0=out0,r0
-	add	out0=4,in0
-(p6)	br.dpnt.many	.Ld_i_unaligned	};;
-
-{ .mmi;	ld4	out1=[in0],8		// s0
-	and	out9=3,in1
-	mov	twenty4=24		}
-{ .mmi;	ld4	out3=[out0],8		// s1
-	ADDP	rk0=0,in2
-	mov	sixteen=16		};;
-{ .mmi;	ld4	out5=[in0]		// s2
-	cmp.ne	p6,p0=out9,r0
-	mov	maskff=0xff		}
-{ .mmb;	ld4	out7=[out0]		// s3
-	ADDP	rk1=KSZ,in2
-	br.call.sptk.many	b6=_ia64_AES_decrypt	};;
-
-{ .mib;	ADDP	in0=4,in1
-	ADDP	in1=0,in1
-(p6)	br.spnt	.Ld_o_unaligned		};;
-
-{ .mii;	mov	ar.pfs=r2
-	mov	ar.lc=r3		}
-{ .mmi;	st4	[in1]=r16,8		// s0
-	st4	[in0]=r20,8		// s1
-	mov	pr=prsave,0x1ffff	};;
-{ .mmb;	st4	[in1]=r24		// s2
-	st4	[in0]=r28		// s3
-	br.ret.sptk.many	b0	};;
-#endif
-
-.align	32
-.Ld_i_unaligned:
-{ .mmi;	add	out0=1,in0
-	add	out2=2,in0
-	add	out4=3,in0	};;
-{ .mmi;	ld1	r16=[in0],4
-	ld1	r17=[out0],4	}//;;
-{ .mmi;	ld1	r18=[out2],4
-	ld1	out1=[out4],4	};;	// s0
-{ .mmi;	ld1	r20=[in0],4
-	ld1	r21=[out0],4	}//;;
-{ .mmi;	ld1	r22=[out2],4
-	ld1	out3=[out4],4	};;	// s1
-{ .mmi;	ld1	r24=[in0],4
-	ld1	r25=[out0],4	}//;;
-{ .mmi;	ld1	r26=[out2],4
-	ld1	out5=[out4],4	};;	// s2
-{ .mmi;	ld1	r28=[in0]
-	ld1	r29=[out0]	}//;;
-{ .mmi;	ld1	r30=[out2]
-	ld1	out7=[out4]	};;	// s3
-
-{ .mii;
-	dep	out1=r16,out1,24,8	//;;
-	dep	out3=r20,out3,24,8	}//;;
-{ .mii;	ADDP	rk0=0,in2
-	dep	out5=r24,out5,24,8	//;;
-	dep	out7=r28,out7,24,8	};;
-{ .mii;	ADDP	rk1=KSZ,in2
-	dep	out1=r17,out1,16,8	//;;
-	dep	out3=r21,out3,16,8	}//;;
-{ .mii;	mov	twenty4=24
-	dep	out5=r25,out5,16,8	//;;
-	dep	out7=r29,out7,16,8	};;
-{ .mii;	mov	sixteen=16
-	dep	out1=r18,out1,8,8	//;;
-	dep	out3=r22,out3,8,8	}//;;
-{ .mii;	mov	maskff=0xff
-	dep	out5=r26,out5,8,8	//;;
-	dep	out7=r30,out7,8,8	};;
-
-{ .mib;	br.call.sptk.many	b6=_ia64_AES_decrypt	};;
-
-.Ld_o_unaligned:
-{ .mii;	ADDP	out0=0,in1
-	extr.u	r17=r16,8,8			// s0
-	shr.u	r19=r16,twenty4		}//;;
-{ .mii;	ADDP	out1=1,in1
-	extr.u	r18=r16,16,8
-	shr.u	r23=r20,twenty4		}//;;	// s1
-{ .mii;	ADDP	out2=2,in1
-	extr.u	r21=r20,8,8
-	shr.u	r22=r20,sixteen	}//;;
-{ .mii;	ADDP	out3=3,in1
-	extr.u	r25=r24,8,8			// s2
-	shr.u	r27=r24,twenty4		};;
-{ .mii;	st1	[out3]=r16,4
-	extr.u	r26=r24,16,8
-	shr.u	r31=r28,twenty4	}//;;	// s3
-{ .mii;	st1	[out2]=r17,4
-	extr.u	r29=r28,8,8
-	shr.u	r30=r28,sixteen		}//;;
-
-{ .mmi;	st1	[out1]=r18,4
-	st1	[out0]=r19,4		};;
-{ .mmi;	st1	[out3]=r20,4
-	st1	[out2]=r21,4		}//;;
-{ .mmi;	st1	[out1]=r22,4
-	st1	[out0]=r23,4		};;
-{ .mmi;	st1	[out3]=r24,4
-	st1	[out2]=r25,4
-	mov	pr=prsave,0x1ffff	}//;;
-{ .mmi;	st1	[out1]=r26,4
-	st1	[out0]=r27,4
-	mov	ar.pfs=r2		};;
-{ .mmi;	st1	[out3]=r28
-	st1	[out2]=r29
-	mov	ar.lc=r3		}//;;
-{ .mmb;	st1	[out1]=r30
-	st1	[out0]=r31
-	br.ret.sptk.many	b0	};;
-.endp	AES_decrypt#
-
-// leave it in .text segment...
-.align	64
-.global	AES_Te#
-.type	AES_Te#,@object
-AES_Te:	data4	0xc66363a5, 0xf87c7c84, 0xee777799, 0xf67b7b8d
-	data4	0xfff2f20d, 0xd66b6bbd, 0xde6f6fb1, 0x91c5c554
-	data4	0x60303050, 0x02010103, 0xce6767a9, 0x562b2b7d
-	data4	0xe7fefe19, 0xb5d7d762, 0x4dababe6, 0xec76769a
-	data4	0x8fcaca45, 0x1f82829d, 0x89c9c940, 0xfa7d7d87
-	data4	0xeffafa15, 0xb25959eb, 0x8e4747c9, 0xfbf0f00b
-	data4	0x41adadec, 0xb3d4d467, 0x5fa2a2fd, 0x45afafea
-	data4	0x239c9cbf, 0x53a4a4f7, 0xe4727296, 0x9bc0c05b
-	data4	0x75b7b7c2, 0xe1fdfd1c, 0x3d9393ae, 0x4c26266a
-	data4	0x6c36365a, 0x7e3f3f41, 0xf5f7f702, 0x83cccc4f
-	data4	0x6834345c, 0x51a5a5f4, 0xd1e5e534, 0xf9f1f108
-	data4	0xe2717193, 0xabd8d873, 0x62313153, 0x2a15153f
-	data4	0x0804040c, 0x95c7c752, 0x46232365, 0x9dc3c35e
-	data4	0x30181828, 0x379696a1, 0x0a05050f, 0x2f9a9ab5
-	data4	0x0e070709, 0x24121236, 0x1b80809b, 0xdfe2e23d
-	data4	0xcdebeb26, 0x4e272769, 0x7fb2b2cd, 0xea75759f
-	data4	0x1209091b, 0x1d83839e, 0x582c2c74, 0x341a1a2e
-	data4	0x361b1b2d, 0xdc6e6eb2, 0xb45a5aee, 0x5ba0a0fb
-	data4	0xa45252f6, 0x763b3b4d, 0xb7d6d661, 0x7db3b3ce
-	data4	0x5229297b, 0xdde3e33e, 0x5e2f2f71, 0x13848497
-	data4	0xa65353f5, 0xb9d1d168, 0x00000000, 0xc1eded2c
-	data4	0x40202060, 0xe3fcfc1f, 0x79b1b1c8, 0xb65b5bed
-	data4	0xd46a6abe, 0x8dcbcb46, 0x67bebed9, 0x7239394b
-	data4	0x944a4ade, 0x984c4cd4, 0xb05858e8, 0x85cfcf4a
-	data4	0xbbd0d06b, 0xc5efef2a, 0x4faaaae5, 0xedfbfb16
-	data4	0x864343c5, 0x9a4d4dd7, 0x66333355, 0x11858594
-	data4	0x8a4545cf, 0xe9f9f910, 0x04020206, 0xfe7f7f81
-	data4	0xa05050f0, 0x783c3c44, 0x259f9fba, 0x4ba8a8e3
-	data4	0xa25151f3, 0x5da3a3fe, 0x804040c0, 0x058f8f8a
-	data4	0x3f9292ad, 0x219d9dbc, 0x70383848, 0xf1f5f504
-	data4	0x63bcbcdf, 0x77b6b6c1, 0xafdada75, 0x42212163
-	data4	0x20101030, 0xe5ffff1a, 0xfdf3f30e, 0xbfd2d26d
-	data4	0x81cdcd4c, 0x180c0c14, 0x26131335, 0xc3ecec2f
-	data4	0xbe5f5fe1, 0x359797a2, 0x884444cc, 0x2e171739
-	data4	0x93c4c457, 0x55a7a7f2, 0xfc7e7e82, 0x7a3d3d47
-	data4	0xc86464ac, 0xba5d5de7, 0x3219192b, 0xe6737395
-	data4	0xc06060a0, 0x19818198, 0x9e4f4fd1, 0xa3dcdc7f
-	data4	0x44222266, 0x542a2a7e, 0x3b9090ab, 0x0b888883
-	data4	0x8c4646ca, 0xc7eeee29, 0x6bb8b8d3, 0x2814143c
-	data4	0xa7dede79, 0xbc5e5ee2, 0x160b0b1d, 0xaddbdb76
-	data4	0xdbe0e03b, 0x64323256, 0x743a3a4e, 0x140a0a1e
-	data4	0x924949db, 0x0c06060a, 0x4824246c, 0xb85c5ce4
-	data4	0x9fc2c25d, 0xbdd3d36e, 0x43acacef, 0xc46262a6
-	data4	0x399191a8, 0x319595a4, 0xd3e4e437, 0xf279798b
-	data4	0xd5e7e732, 0x8bc8c843, 0x6e373759, 0xda6d6db7
-	data4	0x018d8d8c, 0xb1d5d564, 0x9c4e4ed2, 0x49a9a9e0
-	data4	0xd86c6cb4, 0xac5656fa, 0xf3f4f407, 0xcfeaea25
-	data4	0xca6565af, 0xf47a7a8e, 0x47aeaee9, 0x10080818
-	data4	0x6fbabad5, 0xf0787888, 0x4a25256f, 0x5c2e2e72
-	data4	0x381c1c24, 0x57a6a6f1, 0x73b4b4c7, 0x97c6c651
-	data4	0xcbe8e823, 0xa1dddd7c, 0xe874749c, 0x3e1f1f21
-	data4	0x964b4bdd, 0x61bdbddc, 0x0d8b8b86, 0x0f8a8a85
-	data4	0xe0707090, 0x7c3e3e42, 0x71b5b5c4, 0xcc6666aa
-	data4	0x904848d8, 0x06030305, 0xf7f6f601, 0x1c0e0e12
-	data4	0xc26161a3, 0x6a35355f, 0xae5757f9, 0x69b9b9d0
-	data4	0x17868691, 0x99c1c158, 0x3a1d1d27, 0x279e9eb9
-	data4	0xd9e1e138, 0xebf8f813, 0x2b9898b3, 0x22111133
-	data4	0xd26969bb, 0xa9d9d970, 0x078e8e89, 0x339494a7
-	data4	0x2d9b9bb6, 0x3c1e1e22, 0x15878792, 0xc9e9e920
-	data4	0x87cece49, 0xaa5555ff, 0x50282878, 0xa5dfdf7a
-	data4	0x038c8c8f, 0x59a1a1f8, 0x09898980, 0x1a0d0d17
-	data4	0x65bfbfda, 0xd7e6e631, 0x844242c6, 0xd06868b8
-	data4	0x824141c3, 0x299999b0, 0x5a2d2d77, 0x1e0f0f11
-	data4	0x7bb0b0cb, 0xa85454fc, 0x6dbbbbd6, 0x2c16163a
-// Te1:
-	data4	0xa5c66363, 0x84f87c7c, 0x99ee7777, 0x8df67b7b
-	data4	0x0dfff2f2, 0xbdd66b6b, 0xb1de6f6f, 0x5491c5c5
-	data4	0x50603030, 0x03020101, 0xa9ce6767, 0x7d562b2b
-	data4	0x19e7fefe, 0x62b5d7d7, 0xe64dabab, 0x9aec7676
-	data4	0x458fcaca, 0x9d1f8282, 0x4089c9c9, 0x87fa7d7d
-	data4	0x15effafa, 0xebb25959, 0xc98e4747, 0x0bfbf0f0
-	data4	0xec41adad, 0x67b3d4d4, 0xfd5fa2a2, 0xea45afaf
-	data4	0xbf239c9c, 0xf753a4a4, 0x96e47272, 0x5b9bc0c0
-	data4	0xc275b7b7, 0x1ce1fdfd, 0xae3d9393, 0x6a4c2626
-	data4	0x5a6c3636, 0x417e3f3f, 0x02f5f7f7, 0x4f83cccc
-	data4	0x5c683434, 0xf451a5a5, 0x34d1e5e5, 0x08f9f1f1
-	data4	0x93e27171, 0x73abd8d8, 0x53623131, 0x3f2a1515
-	data4	0x0c080404, 0x5295c7c7, 0x65462323, 0x5e9dc3c3
-	data4	0x28301818, 0xa1379696, 0x0f0a0505, 0xb52f9a9a
-	data4	0x090e0707, 0x36241212, 0x9b1b8080, 0x3ddfe2e2
-	data4	0x26cdebeb, 0x694e2727, 0xcd7fb2b2, 0x9fea7575
-	data4	0x1b120909, 0x9e1d8383, 0x74582c2c, 0x2e341a1a
-	data4	0x2d361b1b, 0xb2dc6e6e, 0xeeb45a5a, 0xfb5ba0a0
-	data4	0xf6a45252, 0x4d763b3b, 0x61b7d6d6, 0xce7db3b3
-	data4	0x7b522929, 0x3edde3e3, 0x715e2f2f, 0x97138484
-	data4	0xf5a65353, 0x68b9d1d1, 0x00000000, 0x2cc1eded
-	data4	0x60402020, 0x1fe3fcfc, 0xc879b1b1, 0xedb65b5b
-	data4	0xbed46a6a, 0x468dcbcb, 0xd967bebe, 0x4b723939
-	data4	0xde944a4a, 0xd4984c4c, 0xe8b05858, 0x4a85cfcf
-	data4	0x6bbbd0d0, 0x2ac5efef, 0xe54faaaa, 0x16edfbfb
-	data4	0xc5864343, 0xd79a4d4d, 0x55663333, 0x94118585
-	data4	0xcf8a4545, 0x10e9f9f9, 0x06040202, 0x81fe7f7f
-	data4	0xf0a05050, 0x44783c3c, 0xba259f9f, 0xe34ba8a8
-	data4	0xf3a25151, 0xfe5da3a3, 0xc0804040, 0x8a058f8f
-	data4	0xad3f9292, 0xbc219d9d, 0x48703838, 0x04f1f5f5
-	data4	0xdf63bcbc, 0xc177b6b6, 0x75afdada, 0x63422121
-	data4	0x30201010, 0x1ae5ffff, 0x0efdf3f3, 0x6dbfd2d2
-	data4	0x4c81cdcd, 0x14180c0c, 0x35261313, 0x2fc3ecec
-	data4	0xe1be5f5f, 0xa2359797, 0xcc884444, 0x392e1717
-	data4	0x5793c4c4, 0xf255a7a7, 0x82fc7e7e, 0x477a3d3d
-	data4	0xacc86464, 0xe7ba5d5d, 0x2b321919, 0x95e67373
-	data4	0xa0c06060, 0x98198181, 0xd19e4f4f, 0x7fa3dcdc
-	data4	0x66442222, 0x7e542a2a, 0xab3b9090, 0x830b8888
-	data4	0xca8c4646, 0x29c7eeee, 0xd36bb8b8, 0x3c281414
-	data4	0x79a7dede, 0xe2bc5e5e, 0x1d160b0b, 0x76addbdb
-	data4	0x3bdbe0e0, 0x56643232, 0x4e743a3a, 0x1e140a0a
-	data4	0xdb924949, 0x0a0c0606, 0x6c482424, 0xe4b85c5c
-	data4	0x5d9fc2c2, 0x6ebdd3d3, 0xef43acac, 0xa6c46262
-	data4	0xa8399191, 0xa4319595, 0x37d3e4e4, 0x8bf27979
-	data4	0x32d5e7e7, 0x438bc8c8, 0x596e3737, 0xb7da6d6d
-	data4	0x8c018d8d, 0x64b1d5d5, 0xd29c4e4e, 0xe049a9a9
-	data4	0xb4d86c6c, 0xfaac5656, 0x07f3f4f4, 0x25cfeaea
-	data4	0xafca6565, 0x8ef47a7a, 0xe947aeae, 0x18100808
-	data4	0xd56fbaba, 0x88f07878, 0x6f4a2525, 0x725c2e2e
-	data4	0x24381c1c, 0xf157a6a6, 0xc773b4b4, 0x5197c6c6
-	data4	0x23cbe8e8, 0x7ca1dddd, 0x9ce87474, 0x213e1f1f
-	data4	0xdd964b4b, 0xdc61bdbd, 0x860d8b8b, 0x850f8a8a
-	data4	0x90e07070, 0x427c3e3e, 0xc471b5b5, 0xaacc6666
-	data4	0xd8904848, 0x05060303, 0x01f7f6f6, 0x121c0e0e
-	data4	0xa3c26161, 0x5f6a3535, 0xf9ae5757, 0xd069b9b9
-	data4	0x91178686, 0x5899c1c1, 0x273a1d1d, 0xb9279e9e
-	data4	0x38d9e1e1, 0x13ebf8f8, 0xb32b9898, 0x33221111
-	data4	0xbbd26969, 0x70a9d9d9, 0x89078e8e, 0xa7339494
-	data4	0xb62d9b9b, 0x223c1e1e, 0x92158787, 0x20c9e9e9
-	data4	0x4987cece, 0xffaa5555, 0x78502828, 0x7aa5dfdf
-	data4	0x8f038c8c, 0xf859a1a1, 0x80098989, 0x171a0d0d
-	data4	0xda65bfbf, 0x31d7e6e6, 0xc6844242, 0xb8d06868
-	data4	0xc3824141, 0xb0299999, 0x775a2d2d, 0x111e0f0f
-	data4	0xcb7bb0b0, 0xfca85454, 0xd66dbbbb, 0x3a2c1616
-// Te2:
-	data4	0x63a5c663, 0x7c84f87c, 0x7799ee77, 0x7b8df67b
-	data4	0xf20dfff2, 0x6bbdd66b, 0x6fb1de6f, 0xc55491c5
-	data4	0x30506030, 0x01030201, 0x67a9ce67, 0x2b7d562b
-	data4	0xfe19e7fe, 0xd762b5d7, 0xabe64dab, 0x769aec76
-	data4	0xca458fca, 0x829d1f82, 0xc94089c9, 0x7d87fa7d
-	data4	0xfa15effa, 0x59ebb259, 0x47c98e47, 0xf00bfbf0
-	data4	0xadec41ad, 0xd467b3d4, 0xa2fd5fa2, 0xafea45af
-	data4	0x9cbf239c, 0xa4f753a4, 0x7296e472, 0xc05b9bc0
-	data4	0xb7c275b7, 0xfd1ce1fd, 0x93ae3d93, 0x266a4c26
-	data4	0x365a6c36, 0x3f417e3f, 0xf702f5f7, 0xcc4f83cc
-	data4	0x345c6834, 0xa5f451a5, 0xe534d1e5, 0xf108f9f1
-	data4	0x7193e271, 0xd873abd8, 0x31536231, 0x153f2a15
-	data4	0x040c0804, 0xc75295c7, 0x23654623, 0xc35e9dc3
-	data4	0x18283018, 0x96a13796, 0x050f0a05, 0x9ab52f9a
-	data4	0x07090e07, 0x12362412, 0x809b1b80, 0xe23ddfe2
-	data4	0xeb26cdeb, 0x27694e27, 0xb2cd7fb2, 0x759fea75
-	data4	0x091b1209, 0x839e1d83, 0x2c74582c, 0x1a2e341a
-	data4	0x1b2d361b, 0x6eb2dc6e, 0x5aeeb45a, 0xa0fb5ba0
-	data4	0x52f6a452, 0x3b4d763b, 0xd661b7d6, 0xb3ce7db3
-	data4	0x297b5229, 0xe33edde3, 0x2f715e2f, 0x84971384
-	data4	0x53f5a653, 0xd168b9d1, 0x00000000, 0xed2cc1ed
-	data4	0x20604020, 0xfc1fe3fc, 0xb1c879b1, 0x5bedb65b
-	data4	0x6abed46a, 0xcb468dcb, 0xbed967be, 0x394b7239
-	data4	0x4ade944a, 0x4cd4984c, 0x58e8b058, 0xcf4a85cf
-	data4	0xd06bbbd0, 0xef2ac5ef, 0xaae54faa, 0xfb16edfb
-	data4	0x43c58643, 0x4dd79a4d, 0x33556633, 0x85941185
-	data4	0x45cf8a45, 0xf910e9f9, 0x02060402, 0x7f81fe7f
-	data4	0x50f0a050, 0x3c44783c, 0x9fba259f, 0xa8e34ba8
-	data4	0x51f3a251, 0xa3fe5da3, 0x40c08040, 0x8f8a058f
-	data4	0x92ad3f92, 0x9dbc219d, 0x38487038, 0xf504f1f5
-	data4	0xbcdf63bc, 0xb6c177b6, 0xda75afda, 0x21634221
-	data4	0x10302010, 0xff1ae5ff, 0xf30efdf3, 0xd26dbfd2
-	data4	0xcd4c81cd, 0x0c14180c, 0x13352613, 0xec2fc3ec
-	data4	0x5fe1be5f, 0x97a23597, 0x44cc8844, 0x17392e17
-	data4	0xc45793c4, 0xa7f255a7, 0x7e82fc7e, 0x3d477a3d
-	data4	0x64acc864, 0x5de7ba5d, 0x192b3219, 0x7395e673
-	data4	0x60a0c060, 0x81981981, 0x4fd19e4f, 0xdc7fa3dc
-	data4	0x22664422, 0x2a7e542a, 0x90ab3b90, 0x88830b88
-	data4	0x46ca8c46, 0xee29c7ee, 0xb8d36bb8, 0x143c2814
-	data4	0xde79a7de, 0x5ee2bc5e, 0x0b1d160b, 0xdb76addb
-	data4	0xe03bdbe0, 0x32566432, 0x3a4e743a, 0x0a1e140a
-	data4	0x49db9249, 0x060a0c06, 0x246c4824, 0x5ce4b85c
-	data4	0xc25d9fc2, 0xd36ebdd3, 0xacef43ac, 0x62a6c462
-	data4	0x91a83991, 0x95a43195, 0xe437d3e4, 0x798bf279
-	data4	0xe732d5e7, 0xc8438bc8, 0x37596e37, 0x6db7da6d
-	data4	0x8d8c018d, 0xd564b1d5, 0x4ed29c4e, 0xa9e049a9
-	data4	0x6cb4d86c, 0x56faac56, 0xf407f3f4, 0xea25cfea
-	data4	0x65afca65, 0x7a8ef47a, 0xaee947ae, 0x08181008
-	data4	0xbad56fba, 0x7888f078, 0x256f4a25, 0x2e725c2e
-	data4	0x1c24381c, 0xa6f157a6, 0xb4c773b4, 0xc65197c6
-	data4	0xe823cbe8, 0xdd7ca1dd, 0x749ce874, 0x1f213e1f
-	data4	0x4bdd964b, 0xbddc61bd, 0x8b860d8b, 0x8a850f8a
-	data4	0x7090e070, 0x3e427c3e, 0xb5c471b5, 0x66aacc66
-	data4	0x48d89048, 0x03050603, 0xf601f7f6, 0x0e121c0e
-	data4	0x61a3c261, 0x355f6a35, 0x57f9ae57, 0xb9d069b9
-	data4	0x86911786, 0xc15899c1, 0x1d273a1d, 0x9eb9279e
-	data4	0xe138d9e1, 0xf813ebf8, 0x98b32b98, 0x11332211
-	data4	0x69bbd269, 0xd970a9d9, 0x8e89078e, 0x94a73394
-	data4	0x9bb62d9b, 0x1e223c1e, 0x87921587, 0xe920c9e9
-	data4	0xce4987ce, 0x55ffaa55, 0x28785028, 0xdf7aa5df
-	data4	0x8c8f038c, 0xa1f859a1, 0x89800989, 0x0d171a0d
-	data4	0xbfda65bf, 0xe631d7e6, 0x42c68442, 0x68b8d068
-	data4	0x41c38241, 0x99b02999, 0x2d775a2d, 0x0f111e0f
-	data4	0xb0cb7bb0, 0x54fca854, 0xbbd66dbb, 0x163a2c16
-// Te3:
-	data4	0x6363a5c6, 0x7c7c84f8, 0x777799ee, 0x7b7b8df6
-	data4	0xf2f20dff, 0x6b6bbdd6, 0x6f6fb1de, 0xc5c55491
-	data4	0x30305060, 0x01010302, 0x6767a9ce, 0x2b2b7d56
-	data4	0xfefe19e7, 0xd7d762b5, 0xababe64d, 0x76769aec
-	data4	0xcaca458f, 0x82829d1f, 0xc9c94089, 0x7d7d87fa
-	data4	0xfafa15ef, 0x5959ebb2, 0x4747c98e, 0xf0f00bfb
-	data4	0xadadec41, 0xd4d467b3, 0xa2a2fd5f, 0xafafea45
-	data4	0x9c9cbf23, 0xa4a4f753, 0x727296e4, 0xc0c05b9b
-	data4	0xb7b7c275, 0xfdfd1ce1, 0x9393ae3d, 0x26266a4c
-	data4	0x36365a6c, 0x3f3f417e, 0xf7f702f5, 0xcccc4f83
-	data4	0x34345c68, 0xa5a5f451, 0xe5e534d1, 0xf1f108f9
-	data4	0x717193e2, 0xd8d873ab, 0x31315362, 0x15153f2a
-	data4	0x04040c08, 0xc7c75295, 0x23236546, 0xc3c35e9d
-	data4	0x18182830, 0x9696a137, 0x05050f0a, 0x9a9ab52f
-	data4	0x0707090e, 0x12123624, 0x80809b1b, 0xe2e23ddf
-	data4	0xebeb26cd, 0x2727694e, 0xb2b2cd7f, 0x75759fea
-	data4	0x09091b12, 0x83839e1d, 0x2c2c7458, 0x1a1a2e34
-	data4	0x1b1b2d36, 0x6e6eb2dc, 0x5a5aeeb4, 0xa0a0fb5b
-	data4	0x5252f6a4, 0x3b3b4d76, 0xd6d661b7, 0xb3b3ce7d
-	data4	0x29297b52, 0xe3e33edd, 0x2f2f715e, 0x84849713
-	data4	0x5353f5a6, 0xd1d168b9, 0x00000000, 0xeded2cc1
-	data4	0x20206040, 0xfcfc1fe3, 0xb1b1c879, 0x5b5bedb6
-	data4	0x6a6abed4, 0xcbcb468d, 0xbebed967, 0x39394b72
-	data4	0x4a4ade94, 0x4c4cd498, 0x5858e8b0, 0xcfcf4a85
-	data4	0xd0d06bbb, 0xefef2ac5, 0xaaaae54f, 0xfbfb16ed
-	data4	0x4343c586, 0x4d4dd79a, 0x33335566, 0x85859411
-	data4	0x4545cf8a, 0xf9f910e9, 0x02020604, 0x7f7f81fe
-	data4	0x5050f0a0, 0x3c3c4478, 0x9f9fba25, 0xa8a8e34b
-	data4	0x5151f3a2, 0xa3a3fe5d, 0x4040c080, 0x8f8f8a05
-	data4	0x9292ad3f, 0x9d9dbc21, 0x38384870, 0xf5f504f1
-	data4	0xbcbcdf63, 0xb6b6c177, 0xdada75af, 0x21216342
-	data4	0x10103020, 0xffff1ae5, 0xf3f30efd, 0xd2d26dbf
-	data4	0xcdcd4c81, 0x0c0c1418, 0x13133526, 0xecec2fc3
-	data4	0x5f5fe1be, 0x9797a235, 0x4444cc88, 0x1717392e
-	data4	0xc4c45793, 0xa7a7f255, 0x7e7e82fc, 0x3d3d477a
-	data4	0x6464acc8, 0x5d5de7ba, 0x19192b32, 0x737395e6
-	data4	0x6060a0c0, 0x81819819, 0x4f4fd19e, 0xdcdc7fa3
-	data4	0x22226644, 0x2a2a7e54, 0x9090ab3b, 0x8888830b
-	data4	0x4646ca8c, 0xeeee29c7, 0xb8b8d36b, 0x14143c28
-	data4	0xdede79a7, 0x5e5ee2bc, 0x0b0b1d16, 0xdbdb76ad
-	data4	0xe0e03bdb, 0x32325664, 0x3a3a4e74, 0x0a0a1e14
-	data4	0x4949db92, 0x06060a0c, 0x24246c48, 0x5c5ce4b8
-	data4	0xc2c25d9f, 0xd3d36ebd, 0xacacef43, 0x6262a6c4
-	data4	0x9191a839, 0x9595a431, 0xe4e437d3, 0x79798bf2
-	data4	0xe7e732d5, 0xc8c8438b, 0x3737596e, 0x6d6db7da
-	data4	0x8d8d8c01, 0xd5d564b1, 0x4e4ed29c, 0xa9a9e049
-	data4	0x6c6cb4d8, 0x5656faac, 0xf4f407f3, 0xeaea25cf
-	data4	0x6565afca, 0x7a7a8ef4, 0xaeaee947, 0x08081810
-	data4	0xbabad56f, 0x787888f0, 0x25256f4a, 0x2e2e725c
-	data4	0x1c1c2438, 0xa6a6f157, 0xb4b4c773, 0xc6c65197
-	data4	0xe8e823cb, 0xdddd7ca1, 0x74749ce8, 0x1f1f213e
-	data4	0x4b4bdd96, 0xbdbddc61, 0x8b8b860d, 0x8a8a850f
-	data4	0x707090e0, 0x3e3e427c, 0xb5b5c471, 0x6666aacc
-	data4	0x4848d890, 0x03030506, 0xf6f601f7, 0x0e0e121c
-	data4	0x6161a3c2, 0x35355f6a, 0x5757f9ae, 0xb9b9d069
-	data4	0x86869117, 0xc1c15899, 0x1d1d273a, 0x9e9eb927
-	data4	0xe1e138d9, 0xf8f813eb, 0x9898b32b, 0x11113322
-	data4	0x6969bbd2, 0xd9d970a9, 0x8e8e8907, 0x9494a733
-	data4	0x9b9bb62d, 0x1e1e223c, 0x87879215, 0xe9e920c9
-	data4	0xcece4987, 0x5555ffaa, 0x28287850, 0xdfdf7aa5
-	data4	0x8c8c8f03, 0xa1a1f859, 0x89898009, 0x0d0d171a
-	data4	0xbfbfda65, 0xe6e631d7, 0x4242c684, 0x6868b8d0
-	data4	0x4141c382, 0x9999b029, 0x2d2d775a, 0x0f0f111e
-	data4	0xb0b0cb7b, 0x5454fca8, 0xbbbbd66d, 0x16163a2c
-// Te4:
-	data4	0x63000000, 0x7c000000, 0x77000000, 0x7b000000
-	data4	0xf2000000, 0x6b000000, 0x6f000000, 0xc5000000
-	data4	0x30000000, 0x01000000, 0x67000000, 0x2b000000
-	data4	0xfe000000, 0xd7000000, 0xab000000, 0x76000000
-	data4	0xca000000, 0x82000000, 0xc9000000, 0x7d000000
-	data4	0xfa000000, 0x59000000, 0x47000000, 0xf0000000
-	data4	0xad000000, 0xd4000000, 0xa2000000, 0xaf000000
-	data4	0x9c000000, 0xa4000000, 0x72000000, 0xc0000000
-	data4	0xb7000000, 0xfd000000, 0x93000000, 0x26000000
-	data4	0x36000000, 0x3f000000, 0xf7000000, 0xcc000000
-	data4	0x34000000, 0xa5000000, 0xe5000000, 0xf1000000
-	data4	0x71000000, 0xd8000000, 0x31000000, 0x15000000
-	data4	0x04000000, 0xc7000000, 0x23000000, 0xc3000000
-	data4	0x18000000, 0x96000000, 0x05000000, 0x9a000000
-	data4	0x07000000, 0x12000000, 0x80000000, 0xe2000000
-	data4	0xeb000000, 0x27000000, 0xb2000000, 0x75000000
-	data4	0x09000000, 0x83000000, 0x2c000000, 0x1a000000
-	data4	0x1b000000, 0x6e000000, 0x5a000000, 0xa0000000
-	data4	0x52000000, 0x3b000000, 0xd6000000, 0xb3000000
-	data4	0x29000000, 0xe3000000, 0x2f000000, 0x84000000
-	data4	0x53000000, 0xd1000000, 0x00000000, 0xed000000
-	data4	0x20000000, 0xfc000000, 0xb1000000, 0x5b000000
-	data4	0x6a000000, 0xcb000000, 0xbe000000, 0x39000000
-	data4	0x4a000000, 0x4c000000, 0x58000000, 0xcf000000
-	data4	0xd0000000, 0xef000000, 0xaa000000, 0xfb000000
-	data4	0x43000000, 0x4d000000, 0x33000000, 0x85000000
-	data4	0x45000000, 0xf9000000, 0x02000000, 0x7f000000
-	data4	0x50000000, 0x3c000000, 0x9f000000, 0xa8000000
-	data4	0x51000000, 0xa3000000, 0x40000000, 0x8f000000
-	data4	0x92000000, 0x9d000000, 0x38000000, 0xf5000000
-	data4	0xbc000000, 0xb6000000, 0xda000000, 0x21000000
-	data4	0x10000000, 0xff000000, 0xf3000000, 0xd2000000
-	data4	0xcd000000, 0x0c000000, 0x13000000, 0xec000000
-	data4	0x5f000000, 0x97000000, 0x44000000, 0x17000000
-	data4	0xc4000000, 0xa7000000, 0x7e000000, 0x3d000000
-	data4	0x64000000, 0x5d000000, 0x19000000, 0x73000000
-	data4	0x60000000, 0x81000000, 0x4f000000, 0xdc000000
-	data4	0x22000000, 0x2a000000, 0x90000000, 0x88000000
-	data4	0x46000000, 0xee000000, 0xb8000000, 0x14000000
-	data4	0xde000000, 0x5e000000, 0x0b000000, 0xdb000000
-	data4	0xe0000000, 0x32000000, 0x3a000000, 0x0a000000
-	data4	0x49000000, 0x06000000, 0x24000000, 0x5c000000
-	data4	0xc2000000, 0xd3000000, 0xac000000, 0x62000000
-	data4	0x91000000, 0x95000000, 0xe4000000, 0x79000000
-	data4	0xe7000000, 0xc8000000, 0x37000000, 0x6d000000
-	data4	0x8d000000, 0xd5000000, 0x4e000000, 0xa9000000
-	data4	0x6c000000, 0x56000000, 0xf4000000, 0xea000000
-	data4	0x65000000, 0x7a000000, 0xae000000, 0x08000000
-	data4	0xba000000, 0x78000000, 0x25000000, 0x2e000000
-	data4	0x1c000000, 0xa6000000, 0xb4000000, 0xc6000000
-	data4	0xe8000000, 0xdd000000, 0x74000000, 0x1f000000
-	data4	0x4b000000, 0xbd000000, 0x8b000000, 0x8a000000
-	data4	0x70000000, 0x3e000000, 0xb5000000, 0x66000000
-	data4	0x48000000, 0x03000000, 0xf6000000, 0x0e000000
-	data4	0x61000000, 0x35000000, 0x57000000, 0xb9000000
-	data4	0x86000000, 0xc1000000, 0x1d000000, 0x9e000000
-	data4	0xe1000000, 0xf8000000, 0x98000000, 0x11000000
-	data4	0x69000000, 0xd9000000, 0x8e000000, 0x94000000
-	data4	0x9b000000, 0x1e000000, 0x87000000, 0xe9000000
-	data4	0xce000000, 0x55000000, 0x28000000, 0xdf000000
-	data4	0x8c000000, 0xa1000000, 0x89000000, 0x0d000000
-	data4	0xbf000000, 0xe6000000, 0x42000000, 0x68000000
-	data4	0x41000000, 0x99000000, 0x2d000000, 0x0f000000
-	data4	0xb0000000, 0x54000000, 0xbb000000, 0x16000000
-// Te5:
-	data4	0x00630000, 0x007c0000, 0x00770000, 0x007b0000
-	data4	0x00f20000, 0x006b0000, 0x006f0000, 0x00c50000
-	data4	0x00300000, 0x00010000, 0x00670000, 0x002b0000
-	data4	0x00fe0000, 0x00d70000, 0x00ab0000, 0x00760000
-	data4	0x00ca0000, 0x00820000, 0x00c90000, 0x007d0000
-	data4	0x00fa0000, 0x00590000, 0x00470000, 0x00f00000
-	data4	0x00ad0000, 0x00d40000, 0x00a20000, 0x00af0000
-	data4	0x009c0000, 0x00a40000, 0x00720000, 0x00c00000
-	data4	0x00b70000, 0x00fd0000, 0x00930000, 0x00260000
-	data4	0x00360000, 0x003f0000, 0x00f70000, 0x00cc0000
-	data4	0x00340000, 0x00a50000, 0x00e50000, 0x00f10000
-	data4	0x00710000, 0x00d80000, 0x00310000, 0x00150000
-	data4	0x00040000, 0x00c70000, 0x00230000, 0x00c30000
-	data4	0x00180000, 0x00960000, 0x00050000, 0x009a0000
-	data4	0x00070000, 0x00120000, 0x00800000, 0x00e20000
-	data4	0x00eb0000, 0x00270000, 0x00b20000, 0x00750000
-	data4	0x00090000, 0x00830000, 0x002c0000, 0x001a0000
-	data4	0x001b0000, 0x006e0000, 0x005a0000, 0x00a00000
-	data4	0x00520000, 0x003b0000, 0x00d60000, 0x00b30000
-	data4	0x00290000, 0x00e30000, 0x002f0000, 0x00840000
-	data4	0x00530000, 0x00d10000, 0x00000000, 0x00ed0000
-	data4	0x00200000, 0x00fc0000, 0x00b10000, 0x005b0000
-	data4	0x006a0000, 0x00cb0000, 0x00be0000, 0x00390000
-	data4	0x004a0000, 0x004c0000, 0x00580000, 0x00cf0000
-	data4	0x00d00000, 0x00ef0000, 0x00aa0000, 0x00fb0000
-	data4	0x00430000, 0x004d0000, 0x00330000, 0x00850000
-	data4	0x00450000, 0x00f90000, 0x00020000, 0x007f0000
-	data4	0x00500000, 0x003c0000, 0x009f0000, 0x00a80000
-	data4	0x00510000, 0x00a30000, 0x00400000, 0x008f0000
-	data4	0x00920000, 0x009d0000, 0x00380000, 0x00f50000
-	data4	0x00bc0000, 0x00b60000, 0x00da0000, 0x00210000
-	data4	0x00100000, 0x00ff0000, 0x00f30000, 0x00d20000
-	data4	0x00cd0000, 0x000c0000, 0x00130000, 0x00ec0000
-	data4	0x005f0000, 0x00970000, 0x00440000, 0x00170000
-	data4	0x00c40000, 0x00a70000, 0x007e0000, 0x003d0000
-	data4	0x00640000, 0x005d0000, 0x00190000, 0x00730000
-	data4	0x00600000, 0x00810000, 0x004f0000, 0x00dc0000
-	data4	0x00220000, 0x002a0000, 0x00900000, 0x00880000
-	data4	0x00460000, 0x00ee0000, 0x00b80000, 0x00140000
-	data4	0x00de0000, 0x005e0000, 0x000b0000, 0x00db0000
-	data4	0x00e00000, 0x00320000, 0x003a0000, 0x000a0000
-	data4	0x00490000, 0x00060000, 0x00240000, 0x005c0000
-	data4	0x00c20000, 0x00d30000, 0x00ac0000, 0x00620000
-	data4	0x00910000, 0x00950000, 0x00e40000, 0x00790000
-	data4	0x00e70000, 0x00c80000, 0x00370000, 0x006d0000
-	data4	0x008d0000, 0x00d50000, 0x004e0000, 0x00a90000
-	data4	0x006c0000, 0x00560000, 0x00f40000, 0x00ea0000
-	data4	0x00650000, 0x007a0000, 0x00ae0000, 0x00080000
-	data4	0x00ba0000, 0x00780000, 0x00250000, 0x002e0000
-	data4	0x001c0000, 0x00a60000, 0x00b40000, 0x00c60000
-	data4	0x00e80000, 0x00dd0000, 0x00740000, 0x001f0000
-	data4	0x004b0000, 0x00bd0000, 0x008b0000, 0x008a0000
-	data4	0x00700000, 0x003e0000, 0x00b50000, 0x00660000
-	data4	0x00480000, 0x00030000, 0x00f60000, 0x000e0000
-	data4	0x00610000, 0x00350000, 0x00570000, 0x00b90000
-	data4	0x00860000, 0x00c10000, 0x001d0000, 0x009e0000
-	data4	0x00e10000, 0x00f80000, 0x00980000, 0x00110000
-	data4	0x00690000, 0x00d90000, 0x008e0000, 0x00940000
-	data4	0x009b0000, 0x001e0000, 0x00870000, 0x00e90000
-	data4	0x00ce0000, 0x00550000, 0x00280000, 0x00df0000
-	data4	0x008c0000, 0x00a10000, 0x00890000, 0x000d0000
-	data4	0x00bf0000, 0x00e60000, 0x00420000, 0x00680000
-	data4	0x00410000, 0x00990000, 0x002d0000, 0x000f0000
-	data4	0x00b00000, 0x00540000, 0x00bb0000, 0x00160000
-// Te6:
-	data4	0x00006300, 0x00007c00, 0x00007700, 0x00007b00
-	data4	0x0000f200, 0x00006b00, 0x00006f00, 0x0000c500
-	data4	0x00003000, 0x00000100, 0x00006700, 0x00002b00
-	data4	0x0000fe00, 0x0000d700, 0x0000ab00, 0x00007600
-	data4	0x0000ca00, 0x00008200, 0x0000c900, 0x00007d00
-	data4	0x0000fa00, 0x00005900, 0x00004700, 0x0000f000
-	data4	0x0000ad00, 0x0000d400, 0x0000a200, 0x0000af00
-	data4	0x00009c00, 0x0000a400, 0x00007200, 0x0000c000
-	data4	0x0000b700, 0x0000fd00, 0x00009300, 0x00002600
-	data4	0x00003600, 0x00003f00, 0x0000f700, 0x0000cc00
-	data4	0x00003400, 0x0000a500, 0x0000e500, 0x0000f100
-	data4	0x00007100, 0x0000d800, 0x00003100, 0x00001500
-	data4	0x00000400, 0x0000c700, 0x00002300, 0x0000c300
-	data4	0x00001800, 0x00009600, 0x00000500, 0x00009a00
-	data4	0x00000700, 0x00001200, 0x00008000, 0x0000e200
-	data4	0x0000eb00, 0x00002700, 0x0000b200, 0x00007500
-	data4	0x00000900, 0x00008300, 0x00002c00, 0x00001a00
-	data4	0x00001b00, 0x00006e00, 0x00005a00, 0x0000a000
-	data4	0x00005200, 0x00003b00, 0x0000d600, 0x0000b300
-	data4	0x00002900, 0x0000e300, 0x00002f00, 0x00008400
-	data4	0x00005300, 0x0000d100, 0x00000000, 0x0000ed00
-	data4	0x00002000, 0x0000fc00, 0x0000b100, 0x00005b00
-	data4	0x00006a00, 0x0000cb00, 0x0000be00, 0x00003900
-	data4	0x00004a00, 0x00004c00, 0x00005800, 0x0000cf00
-	data4	0x0000d000, 0x0000ef00, 0x0000aa00, 0x0000fb00
-	data4	0x00004300, 0x00004d00, 0x00003300, 0x00008500
-	data4	0x00004500, 0x0000f900, 0x00000200, 0x00007f00
-	data4	0x00005000, 0x00003c00, 0x00009f00, 0x0000a800
-	data4	0x00005100, 0x0000a300, 0x00004000, 0x00008f00
-	data4	0x00009200, 0x00009d00, 0x00003800, 0x0000f500
-	data4	0x0000bc00, 0x0000b600, 0x0000da00, 0x00002100
-	data4	0x00001000, 0x0000ff00, 0x0000f300, 0x0000d200
-	data4	0x0000cd00, 0x00000c00, 0x00001300, 0x0000ec00
-	data4	0x00005f00, 0x00009700, 0x00004400, 0x00001700
-	data4	0x0000c400, 0x0000a700, 0x00007e00, 0x00003d00
-	data4	0x00006400, 0x00005d00, 0x00001900, 0x00007300
-	data4	0x00006000, 0x00008100, 0x00004f00, 0x0000dc00
-	data4	0x00002200, 0x00002a00, 0x00009000, 0x00008800
-	data4	0x00004600, 0x0000ee00, 0x0000b800, 0x00001400
-	data4	0x0000de00, 0x00005e00, 0x00000b00, 0x0000db00
-	data4	0x0000e000, 0x00003200, 0x00003a00, 0x00000a00
-	data4	0x00004900, 0x00000600, 0x00002400, 0x00005c00
-	data4	0x0000c200, 0x0000d300, 0x0000ac00, 0x00006200
-	data4	0x00009100, 0x00009500, 0x0000e400, 0x00007900
-	data4	0x0000e700, 0x0000c800, 0x00003700, 0x00006d00
-	data4	0x00008d00, 0x0000d500, 0x00004e00, 0x0000a900
-	data4	0x00006c00, 0x00005600, 0x0000f400, 0x0000ea00
-	data4	0x00006500, 0x00007a00, 0x0000ae00, 0x00000800
-	data4	0x0000ba00, 0x00007800, 0x00002500, 0x00002e00
-	data4	0x00001c00, 0x0000a600, 0x0000b400, 0x0000c600
-	data4	0x0000e800, 0x0000dd00, 0x00007400, 0x00001f00
-	data4	0x00004b00, 0x0000bd00, 0x00008b00, 0x00008a00
-	data4	0x00007000, 0x00003e00, 0x0000b500, 0x00006600
-	data4	0x00004800, 0x00000300, 0x0000f600, 0x00000e00
-	data4	0x00006100, 0x00003500, 0x00005700, 0x0000b900
-	data4	0x00008600, 0x0000c100, 0x00001d00, 0x00009e00
-	data4	0x0000e100, 0x0000f800, 0x00009800, 0x00001100
-	data4	0x00006900, 0x0000d900, 0x00008e00, 0x00009400
-	data4	0x00009b00, 0x00001e00, 0x00008700, 0x0000e900
-	data4	0x0000ce00, 0x00005500, 0x00002800, 0x0000df00
-	data4	0x00008c00, 0x0000a100, 0x00008900, 0x00000d00
-	data4	0x0000bf00, 0x0000e600, 0x00004200, 0x00006800
-	data4	0x00004100, 0x00009900, 0x00002d00, 0x00000f00
-	data4	0x0000b000, 0x00005400, 0x0000bb00, 0x00001600
-// Te7:
-	data4	0x00000063, 0x0000007c, 0x00000077, 0x0000007b
-	data4	0x000000f2, 0x0000006b, 0x0000006f, 0x000000c5
-	data4	0x00000030, 0x00000001, 0x00000067, 0x0000002b
-	data4	0x000000fe, 0x000000d7, 0x000000ab, 0x00000076
-	data4	0x000000ca, 0x00000082, 0x000000c9, 0x0000007d
-	data4	0x000000fa, 0x00000059, 0x00000047, 0x000000f0
-	data4	0x000000ad, 0x000000d4, 0x000000a2, 0x000000af
-	data4	0x0000009c, 0x000000a4, 0x00000072, 0x000000c0
-	data4	0x000000b7, 0x000000fd, 0x00000093, 0x00000026
-	data4	0x00000036, 0x0000003f, 0x000000f7, 0x000000cc
-	data4	0x00000034, 0x000000a5, 0x000000e5, 0x000000f1
-	data4	0x00000071, 0x000000d8, 0x00000031, 0x00000015
-	data4	0x00000004, 0x000000c7, 0x00000023, 0x000000c3
-	data4	0x00000018, 0x00000096, 0x00000005, 0x0000009a
-	data4	0x00000007, 0x00000012, 0x00000080, 0x000000e2
-	data4	0x000000eb, 0x00000027, 0x000000b2, 0x00000075
-	data4	0x00000009, 0x00000083, 0x0000002c, 0x0000001a
-	data4	0x0000001b, 0x0000006e, 0x0000005a, 0x000000a0
-	data4	0x00000052, 0x0000003b, 0x000000d6, 0x000000b3
-	data4	0x00000029, 0x000000e3, 0x0000002f, 0x00000084
-	data4	0x00000053, 0x000000d1, 0x00000000, 0x000000ed
-	data4	0x00000020, 0x000000fc, 0x000000b1, 0x0000005b
-	data4	0x0000006a, 0x000000cb, 0x000000be, 0x00000039
-	data4	0x0000004a, 0x0000004c, 0x00000058, 0x000000cf
-	data4	0x000000d0, 0x000000ef, 0x000000aa, 0x000000fb
-	data4	0x00000043, 0x0000004d, 0x00000033, 0x00000085
-	data4	0x00000045, 0x000000f9, 0x00000002, 0x0000007f
-	data4	0x00000050, 0x0000003c, 0x0000009f, 0x000000a8
-	data4	0x00000051, 0x000000a3, 0x00000040, 0x0000008f
-	data4	0x00000092, 0x0000009d, 0x00000038, 0x000000f5
-	data4	0x000000bc, 0x000000b6, 0x000000da, 0x00000021
-	data4	0x00000010, 0x000000ff, 0x000000f3, 0x000000d2
-	data4	0x000000cd, 0x0000000c, 0x00000013, 0x000000ec
-	data4	0x0000005f, 0x00000097, 0x00000044, 0x00000017
-	data4	0x000000c4, 0x000000a7, 0x0000007e, 0x0000003d
-	data4	0x00000064, 0x0000005d, 0x00000019, 0x00000073
-	data4	0x00000060, 0x00000081, 0x0000004f, 0x000000dc
-	data4	0x00000022, 0x0000002a, 0x00000090, 0x00000088
-	data4	0x00000046, 0x000000ee, 0x000000b8, 0x00000014
-	data4	0x000000de, 0x0000005e, 0x0000000b, 0x000000db
-	data4	0x000000e0, 0x00000032, 0x0000003a, 0x0000000a
-	data4	0x00000049, 0x00000006, 0x00000024, 0x0000005c
-	data4	0x000000c2, 0x000000d3, 0x000000ac, 0x00000062
-	data4	0x00000091, 0x00000095, 0x000000e4, 0x00000079
-	data4	0x000000e7, 0x000000c8, 0x00000037, 0x0000006d
-	data4	0x0000008d, 0x000000d5, 0x0000004e, 0x000000a9
-	data4	0x0000006c, 0x00000056, 0x000000f4, 0x000000ea
-	data4	0x00000065, 0x0000007a, 0x000000ae, 0x00000008
-	data4	0x000000ba, 0x00000078, 0x00000025, 0x0000002e
-	data4	0x0000001c, 0x000000a6, 0x000000b4, 0x000000c6
-	data4	0x000000e8, 0x000000dd, 0x00000074, 0x0000001f
-	data4	0x0000004b, 0x000000bd, 0x0000008b, 0x0000008a
-	data4	0x00000070, 0x0000003e, 0x000000b5, 0x00000066
-	data4	0x00000048, 0x00000003, 0x000000f6, 0x0000000e
-	data4	0x00000061, 0x00000035, 0x00000057, 0x000000b9
-	data4	0x00000086, 0x000000c1, 0x0000001d, 0x0000009e
-	data4	0x000000e1, 0x000000f8, 0x00000098, 0x00000011
-	data4	0x00000069, 0x000000d9, 0x0000008e, 0x00000094
-	data4	0x0000009b, 0x0000001e, 0x00000087, 0x000000e9
-	data4	0x000000ce, 0x00000055, 0x00000028, 0x000000df
-	data4	0x0000008c, 0x000000a1, 0x00000089, 0x0000000d
-	data4	0x000000bf, 0x000000e6, 0x00000042, 0x00000068
-	data4	0x00000041, 0x00000099, 0x0000002d, 0x0000000f
-	data4	0x000000b0, 0x00000054, 0x000000bb, 0x00000016
-.size	AES_Te#,8*256*4	// HP-UX assembler fails to ".-AES_Te#"
-
-.align	64
-.global	AES_Td#
-.type	AES_Td#,@object
-AES_Td:	data4	0x51f4a750, 0x7e416553, 0x1a17a4c3, 0x3a275e96
-	data4	0x3bab6bcb, 0x1f9d45f1, 0xacfa58ab, 0x4be30393
-	data4	0x2030fa55, 0xad766df6, 0x88cc7691, 0xf5024c25
-	data4	0x4fe5d7fc, 0xc52acbd7, 0x26354480, 0xb562a38f
-	data4	0xdeb15a49, 0x25ba1b67, 0x45ea0e98, 0x5dfec0e1
-	data4	0xc32f7502, 0x814cf012, 0x8d4697a3, 0x6bd3f9c6
-	data4	0x038f5fe7, 0x15929c95, 0xbf6d7aeb, 0x955259da
-	data4	0xd4be832d, 0x587421d3, 0x49e06929, 0x8ec9c844
-	data4	0x75c2896a, 0xf48e7978, 0x99583e6b, 0x27b971dd
-	data4	0xbee14fb6, 0xf088ad17, 0xc920ac66, 0x7dce3ab4
-	data4	0x63df4a18, 0xe51a3182, 0x97513360, 0x62537f45
-	data4	0xb16477e0, 0xbb6bae84, 0xfe81a01c, 0xf9082b94
-	data4	0x70486858, 0x8f45fd19, 0x94de6c87, 0x527bf8b7
-	data4	0xab73d323, 0x724b02e2, 0xe31f8f57, 0x6655ab2a
-	data4	0xb2eb2807, 0x2fb5c203, 0x86c57b9a, 0xd33708a5
-	data4	0x302887f2, 0x23bfa5b2, 0x02036aba, 0xed16825c
-	data4	0x8acf1c2b, 0xa779b492, 0xf307f2f0, 0x4e69e2a1
-	data4	0x65daf4cd, 0x0605bed5, 0xd134621f, 0xc4a6fe8a
-	data4	0x342e539d, 0xa2f355a0, 0x058ae132, 0xa4f6eb75
-	data4	0x0b83ec39, 0x4060efaa, 0x5e719f06, 0xbd6e1051
-	data4	0x3e218af9, 0x96dd063d, 0xdd3e05ae, 0x4de6bd46
-	data4	0x91548db5, 0x71c45d05, 0x0406d46f, 0x605015ff
-	data4	0x1998fb24, 0xd6bde997, 0x894043cc, 0x67d99e77
-	data4	0xb0e842bd, 0x07898b88, 0xe7195b38, 0x79c8eedb
-	data4	0xa17c0a47, 0x7c420fe9, 0xf8841ec9, 0x00000000
-	data4	0x09808683, 0x322bed48, 0x1e1170ac, 0x6c5a724e
-	data4	0xfd0efffb, 0x0f853856, 0x3daed51e, 0x362d3927
-	data4	0x0a0fd964, 0x685ca621, 0x9b5b54d1, 0x24362e3a
-	data4	0x0c0a67b1, 0x9357e70f, 0xb4ee96d2, 0x1b9b919e
-	data4	0x80c0c54f, 0x61dc20a2, 0x5a774b69, 0x1c121a16
-	data4	0xe293ba0a, 0xc0a02ae5, 0x3c22e043, 0x121b171d
-	data4	0x0e090d0b, 0xf28bc7ad, 0x2db6a8b9, 0x141ea9c8
-	data4	0x57f11985, 0xaf75074c, 0xee99ddbb, 0xa37f60fd
-	data4	0xf701269f, 0x5c72f5bc, 0x44663bc5, 0x5bfb7e34
-	data4	0x8b432976, 0xcb23c6dc, 0xb6edfc68, 0xb8e4f163
-	data4	0xd731dcca, 0x42638510, 0x13972240, 0x84c61120
-	data4	0x854a247d, 0xd2bb3df8, 0xaef93211, 0xc729a16d
-	data4	0x1d9e2f4b, 0xdcb230f3, 0x0d8652ec, 0x77c1e3d0
-	data4	0x2bb3166c, 0xa970b999, 0x119448fa, 0x47e96422
-	data4	0xa8fc8cc4, 0xa0f03f1a, 0x567d2cd8, 0x223390ef
-	data4	0x87494ec7, 0xd938d1c1, 0x8ccaa2fe, 0x98d40b36
-	data4	0xa6f581cf, 0xa57ade28, 0xdab78e26, 0x3fadbfa4
-	data4	0x2c3a9de4, 0x5078920d, 0x6a5fcc9b, 0x547e4662
-	data4	0xf68d13c2, 0x90d8b8e8, 0x2e39f75e, 0x82c3aff5
-	data4	0x9f5d80be, 0x69d0937c, 0x6fd52da9, 0xcf2512b3
-	data4	0xc8ac993b, 0x10187da7, 0xe89c636e, 0xdb3bbb7b
-	data4	0xcd267809, 0x6e5918f4, 0xec9ab701, 0x834f9aa8
-	data4	0xe6956e65, 0xaaffe67e, 0x21bccf08, 0xef15e8e6
-	data4	0xbae79bd9, 0x4a6f36ce, 0xea9f09d4, 0x29b07cd6
-	data4	0x31a4b2af, 0x2a3f2331, 0xc6a59430, 0x35a266c0
-	data4	0x744ebc37, 0xfc82caa6, 0xe090d0b0, 0x33a7d815
-	data4	0xf104984a, 0x41ecdaf7, 0x7fcd500e, 0x1791f62f
-	data4	0x764dd68d, 0x43efb04d, 0xccaa4d54, 0xe49604df
-	data4	0x9ed1b5e3, 0x4c6a881b, 0xc12c1fb8, 0x4665517f
-	data4	0x9d5eea04, 0x018c355d, 0xfa877473, 0xfb0b412e
-	data4	0xb3671d5a, 0x92dbd252, 0xe9105633, 0x6dd64713
-	data4	0x9ad7618c, 0x37a10c7a, 0x59f8148e, 0xeb133c89
-	data4	0xcea927ee, 0xb761c935, 0xe11ce5ed, 0x7a47b13c
-	data4	0x9cd2df59, 0x55f2733f, 0x1814ce79, 0x73c737bf
-	data4	0x53f7cdea, 0x5ffdaa5b, 0xdf3d6f14, 0x7844db86
-	data4	0xcaaff381, 0xb968c43e, 0x3824342c, 0xc2a3405f
-	data4	0x161dc372, 0xbce2250c, 0x283c498b, 0xff0d9541
-	data4	0x39a80171, 0x080cb3de, 0xd8b4e49c, 0x6456c190
-	data4	0x7bcb8461, 0xd532b670, 0x486c5c74, 0xd0b85742
-// Td1:
-	data4	0x5051f4a7, 0x537e4165, 0xc31a17a4, 0x963a275e
-	data4	0xcb3bab6b, 0xf11f9d45, 0xabacfa58, 0x934be303
-	data4	0x552030fa, 0xf6ad766d, 0x9188cc76, 0x25f5024c
-	data4	0xfc4fe5d7, 0xd7c52acb, 0x80263544, 0x8fb562a3
-	data4	0x49deb15a, 0x6725ba1b, 0x9845ea0e, 0xe15dfec0
-	data4	0x02c32f75, 0x12814cf0, 0xa38d4697, 0xc66bd3f9
-	data4	0xe7038f5f, 0x9515929c, 0xebbf6d7a, 0xda955259
-	data4	0x2dd4be83, 0xd3587421, 0x2949e069, 0x448ec9c8
-	data4	0x6a75c289, 0x78f48e79, 0x6b99583e, 0xdd27b971
-	data4	0xb6bee14f, 0x17f088ad, 0x66c920ac, 0xb47dce3a
-	data4	0x1863df4a, 0x82e51a31, 0x60975133, 0x4562537f
-	data4	0xe0b16477, 0x84bb6bae, 0x1cfe81a0, 0x94f9082b
-	data4	0x58704868, 0x198f45fd, 0x8794de6c, 0xb7527bf8
-	data4	0x23ab73d3, 0xe2724b02, 0x57e31f8f, 0x2a6655ab
-	data4	0x07b2eb28, 0x032fb5c2, 0x9a86c57b, 0xa5d33708
-	data4	0xf2302887, 0xb223bfa5, 0xba02036a, 0x5ced1682
-	data4	0x2b8acf1c, 0x92a779b4, 0xf0f307f2, 0xa14e69e2
-	data4	0xcd65daf4, 0xd50605be, 0x1fd13462, 0x8ac4a6fe
-	data4	0x9d342e53, 0xa0a2f355, 0x32058ae1, 0x75a4f6eb
-	data4	0x390b83ec, 0xaa4060ef, 0x065e719f, 0x51bd6e10
-	data4	0xf93e218a, 0x3d96dd06, 0xaedd3e05, 0x464de6bd
-	data4	0xb591548d, 0x0571c45d, 0x6f0406d4, 0xff605015
-	data4	0x241998fb, 0x97d6bde9, 0xcc894043, 0x7767d99e
-	data4	0xbdb0e842, 0x8807898b, 0x38e7195b, 0xdb79c8ee
-	data4	0x47a17c0a, 0xe97c420f, 0xc9f8841e, 0x00000000
-	data4	0x83098086, 0x48322bed, 0xac1e1170, 0x4e6c5a72
-	data4	0xfbfd0eff, 0x560f8538, 0x1e3daed5, 0x27362d39
-	data4	0x640a0fd9, 0x21685ca6, 0xd19b5b54, 0x3a24362e
-	data4	0xb10c0a67, 0x0f9357e7, 0xd2b4ee96, 0x9e1b9b91
-	data4	0x4f80c0c5, 0xa261dc20, 0x695a774b, 0x161c121a
-	data4	0x0ae293ba, 0xe5c0a02a, 0x433c22e0, 0x1d121b17
-	data4	0x0b0e090d, 0xadf28bc7, 0xb92db6a8, 0xc8141ea9
-	data4	0x8557f119, 0x4caf7507, 0xbbee99dd, 0xfda37f60
-	data4	0x9ff70126, 0xbc5c72f5, 0xc544663b, 0x345bfb7e
-	data4	0x768b4329, 0xdccb23c6, 0x68b6edfc, 0x63b8e4f1
-	data4	0xcad731dc, 0x10426385, 0x40139722, 0x2084c611
-	data4	0x7d854a24, 0xf8d2bb3d, 0x11aef932, 0x6dc729a1
-	data4	0x4b1d9e2f, 0xf3dcb230, 0xec0d8652, 0xd077c1e3
-	data4	0x6c2bb316, 0x99a970b9, 0xfa119448, 0x2247e964
-	data4	0xc4a8fc8c, 0x1aa0f03f, 0xd8567d2c, 0xef223390
-	data4	0xc787494e, 0xc1d938d1, 0xfe8ccaa2, 0x3698d40b
-	data4	0xcfa6f581, 0x28a57ade, 0x26dab78e, 0xa43fadbf
-	data4	0xe42c3a9d, 0x0d507892, 0x9b6a5fcc, 0x62547e46
-	data4	0xc2f68d13, 0xe890d8b8, 0x5e2e39f7, 0xf582c3af
-	data4	0xbe9f5d80, 0x7c69d093, 0xa96fd52d, 0xb3cf2512
-	data4	0x3bc8ac99, 0xa710187d, 0x6ee89c63, 0x7bdb3bbb
-	data4	0x09cd2678, 0xf46e5918, 0x01ec9ab7, 0xa8834f9a
-	data4	0x65e6956e, 0x7eaaffe6, 0x0821bccf, 0xe6ef15e8
-	data4	0xd9bae79b, 0xce4a6f36, 0xd4ea9f09, 0xd629b07c
-	data4	0xaf31a4b2, 0x312a3f23, 0x30c6a594, 0xc035a266
-	data4	0x37744ebc, 0xa6fc82ca, 0xb0e090d0, 0x1533a7d8
-	data4	0x4af10498, 0xf741ecda, 0x0e7fcd50, 0x2f1791f6
-	data4	0x8d764dd6, 0x4d43efb0, 0x54ccaa4d, 0xdfe49604
-	data4	0xe39ed1b5, 0x1b4c6a88, 0xb8c12c1f, 0x7f466551
-	data4	0x049d5eea, 0x5d018c35, 0x73fa8774, 0x2efb0b41
-	data4	0x5ab3671d, 0x5292dbd2, 0x33e91056, 0x136dd647
-	data4	0x8c9ad761, 0x7a37a10c, 0x8e59f814, 0x89eb133c
-	data4	0xeecea927, 0x35b761c9, 0xede11ce5, 0x3c7a47b1
-	data4	0x599cd2df, 0x3f55f273, 0x791814ce, 0xbf73c737
-	data4	0xea53f7cd, 0x5b5ffdaa, 0x14df3d6f, 0x867844db
-	data4	0x81caaff3, 0x3eb968c4, 0x2c382434, 0x5fc2a340
-	data4	0x72161dc3, 0x0cbce225, 0x8b283c49, 0x41ff0d95
-	data4	0x7139a801, 0xde080cb3, 0x9cd8b4e4, 0x906456c1
-	data4	0x617bcb84, 0x70d532b6, 0x74486c5c, 0x42d0b857
-// Td2:
-	data4	0xa75051f4, 0x65537e41, 0xa4c31a17, 0x5e963a27
-	data4	0x6bcb3bab, 0x45f11f9d, 0x58abacfa, 0x03934be3
-	data4	0xfa552030, 0x6df6ad76, 0x769188cc, 0x4c25f502
-	data4	0xd7fc4fe5, 0xcbd7c52a, 0x44802635, 0xa38fb562
-	data4	0x5a49deb1, 0x1b6725ba, 0x0e9845ea, 0xc0e15dfe
-	data4	0x7502c32f, 0xf012814c, 0x97a38d46, 0xf9c66bd3
-	data4	0x5fe7038f, 0x9c951592, 0x7aebbf6d, 0x59da9552
-	data4	0x832dd4be, 0x21d35874, 0x692949e0, 0xc8448ec9
-	data4	0x896a75c2, 0x7978f48e, 0x3e6b9958, 0x71dd27b9
-	data4	0x4fb6bee1, 0xad17f088, 0xac66c920, 0x3ab47dce
-	data4	0x4a1863df, 0x3182e51a, 0x33609751, 0x7f456253
-	data4	0x77e0b164, 0xae84bb6b, 0xa01cfe81, 0x2b94f908
-	data4	0x68587048, 0xfd198f45, 0x6c8794de, 0xf8b7527b
-	data4	0xd323ab73, 0x02e2724b, 0x8f57e31f, 0xab2a6655
-	data4	0x2807b2eb, 0xc2032fb5, 0x7b9a86c5, 0x08a5d337
-	data4	0x87f23028, 0xa5b223bf, 0x6aba0203, 0x825ced16
-	data4	0x1c2b8acf, 0xb492a779, 0xf2f0f307, 0xe2a14e69
-	data4	0xf4cd65da, 0xbed50605, 0x621fd134, 0xfe8ac4a6
-	data4	0x539d342e, 0x55a0a2f3, 0xe132058a, 0xeb75a4f6
-	data4	0xec390b83, 0xefaa4060, 0x9f065e71, 0x1051bd6e
-	data4	0x8af93e21, 0x063d96dd, 0x05aedd3e, 0xbd464de6
-	data4	0x8db59154, 0x5d0571c4, 0xd46f0406, 0x15ff6050
-	data4	0xfb241998, 0xe997d6bd, 0x43cc8940, 0x9e7767d9
-	data4	0x42bdb0e8, 0x8b880789, 0x5b38e719, 0xeedb79c8
-	data4	0x0a47a17c, 0x0fe97c42, 0x1ec9f884, 0x00000000
-	data4	0x86830980, 0xed48322b, 0x70ac1e11, 0x724e6c5a
-	data4	0xfffbfd0e, 0x38560f85, 0xd51e3dae, 0x3927362d
-	data4	0xd9640a0f, 0xa621685c, 0x54d19b5b, 0x2e3a2436
-	data4	0x67b10c0a, 0xe70f9357, 0x96d2b4ee, 0x919e1b9b
-	data4	0xc54f80c0, 0x20a261dc, 0x4b695a77, 0x1a161c12
-	data4	0xba0ae293, 0x2ae5c0a0, 0xe0433c22, 0x171d121b
-	data4	0x0d0b0e09, 0xc7adf28b, 0xa8b92db6, 0xa9c8141e
-	data4	0x198557f1, 0x074caf75, 0xddbbee99, 0x60fda37f
-	data4	0x269ff701, 0xf5bc5c72, 0x3bc54466, 0x7e345bfb
-	data4	0x29768b43, 0xc6dccb23, 0xfc68b6ed, 0xf163b8e4
-	data4	0xdccad731, 0x85104263, 0x22401397, 0x112084c6
-	data4	0x247d854a, 0x3df8d2bb, 0x3211aef9, 0xa16dc729
-	data4	0x2f4b1d9e, 0x30f3dcb2, 0x52ec0d86, 0xe3d077c1
-	data4	0x166c2bb3, 0xb999a970, 0x48fa1194, 0x642247e9
-	data4	0x8cc4a8fc, 0x3f1aa0f0, 0x2cd8567d, 0x90ef2233
-	data4	0x4ec78749, 0xd1c1d938, 0xa2fe8cca, 0x0b3698d4
-	data4	0x81cfa6f5, 0xde28a57a, 0x8e26dab7, 0xbfa43fad
-	data4	0x9de42c3a, 0x920d5078, 0xcc9b6a5f, 0x4662547e
-	data4	0x13c2f68d, 0xb8e890d8, 0xf75e2e39, 0xaff582c3
-	data4	0x80be9f5d, 0x937c69d0, 0x2da96fd5, 0x12b3cf25
-	data4	0x993bc8ac, 0x7da71018, 0x636ee89c, 0xbb7bdb3b
-	data4	0x7809cd26, 0x18f46e59, 0xb701ec9a, 0x9aa8834f
-	data4	0x6e65e695, 0xe67eaaff, 0xcf0821bc, 0xe8e6ef15
-	data4	0x9bd9bae7, 0x36ce4a6f, 0x09d4ea9f, 0x7cd629b0
-	data4	0xb2af31a4, 0x23312a3f, 0x9430c6a5, 0x66c035a2
-	data4	0xbc37744e, 0xcaa6fc82, 0xd0b0e090, 0xd81533a7
-	data4	0x984af104, 0xdaf741ec, 0x500e7fcd, 0xf62f1791
-	data4	0xd68d764d, 0xb04d43ef, 0x4d54ccaa, 0x04dfe496
-	data4	0xb5e39ed1, 0x881b4c6a, 0x1fb8c12c, 0x517f4665
-	data4	0xea049d5e, 0x355d018c, 0x7473fa87, 0x412efb0b
-	data4	0x1d5ab367, 0xd25292db, 0x5633e910, 0x47136dd6
-	data4	0x618c9ad7, 0x0c7a37a1, 0x148e59f8, 0x3c89eb13
-	data4	0x27eecea9, 0xc935b761, 0xe5ede11c, 0xb13c7a47
-	data4	0xdf599cd2, 0x733f55f2, 0xce791814, 0x37bf73c7
-	data4	0xcdea53f7, 0xaa5b5ffd, 0x6f14df3d, 0xdb867844
-	data4	0xf381caaf, 0xc43eb968, 0x342c3824, 0x405fc2a3
-	data4	0xc372161d, 0x250cbce2, 0x498b283c, 0x9541ff0d
-	data4	0x017139a8, 0xb3de080c, 0xe49cd8b4, 0xc1906456
-	data4	0x84617bcb, 0xb670d532, 0x5c74486c, 0x5742d0b8
-// Td3:
-	data4	0xf4a75051, 0x4165537e, 0x17a4c31a, 0x275e963a
-	data4	0xab6bcb3b, 0x9d45f11f, 0xfa58abac, 0xe303934b
-	data4	0x30fa5520, 0x766df6ad, 0xcc769188, 0x024c25f5
-	data4	0xe5d7fc4f, 0x2acbd7c5, 0x35448026, 0x62a38fb5
-	data4	0xb15a49de, 0xba1b6725, 0xea0e9845, 0xfec0e15d
-	data4	0x2f7502c3, 0x4cf01281, 0x4697a38d, 0xd3f9c66b
-	data4	0x8f5fe703, 0x929c9515, 0x6d7aebbf, 0x5259da95
-	data4	0xbe832dd4, 0x7421d358, 0xe0692949, 0xc9c8448e
-	data4	0xc2896a75, 0x8e7978f4, 0x583e6b99, 0xb971dd27
-	data4	0xe14fb6be, 0x88ad17f0, 0x20ac66c9, 0xce3ab47d
-	data4	0xdf4a1863, 0x1a3182e5, 0x51336097, 0x537f4562
-	data4	0x6477e0b1, 0x6bae84bb, 0x81a01cfe, 0x082b94f9
-	data4	0x48685870, 0x45fd198f, 0xde6c8794, 0x7bf8b752
-	data4	0x73d323ab, 0x4b02e272, 0x1f8f57e3, 0x55ab2a66
-	data4	0xeb2807b2, 0xb5c2032f, 0xc57b9a86, 0x3708a5d3
-	data4	0x2887f230, 0xbfa5b223, 0x036aba02, 0x16825ced
-	data4	0xcf1c2b8a, 0x79b492a7, 0x07f2f0f3, 0x69e2a14e
-	data4	0xdaf4cd65, 0x05bed506, 0x34621fd1, 0xa6fe8ac4
-	data4	0x2e539d34, 0xf355a0a2, 0x8ae13205, 0xf6eb75a4
-	data4	0x83ec390b, 0x60efaa40, 0x719f065e, 0x6e1051bd
-	data4	0x218af93e, 0xdd063d96, 0x3e05aedd, 0xe6bd464d
-	data4	0x548db591, 0xc45d0571, 0x06d46f04, 0x5015ff60
-	data4	0x98fb2419, 0xbde997d6, 0x4043cc89, 0xd99e7767
-	data4	0xe842bdb0, 0x898b8807, 0x195b38e7, 0xc8eedb79
-	data4	0x7c0a47a1, 0x420fe97c, 0x841ec9f8, 0x00000000
-	data4	0x80868309, 0x2bed4832, 0x1170ac1e, 0x5a724e6c
-	data4	0x0efffbfd, 0x8538560f, 0xaed51e3d, 0x2d392736
-	data4	0x0fd9640a, 0x5ca62168, 0x5b54d19b, 0x362e3a24
-	data4	0x0a67b10c, 0x57e70f93, 0xee96d2b4, 0x9b919e1b
-	data4	0xc0c54f80, 0xdc20a261, 0x774b695a, 0x121a161c
-	data4	0x93ba0ae2, 0xa02ae5c0, 0x22e0433c, 0x1b171d12
-	data4	0x090d0b0e, 0x8bc7adf2, 0xb6a8b92d, 0x1ea9c814
-	data4	0xf1198557, 0x75074caf, 0x99ddbbee, 0x7f60fda3
-	data4	0x01269ff7, 0x72f5bc5c, 0x663bc544, 0xfb7e345b
-	data4	0x4329768b, 0x23c6dccb, 0xedfc68b6, 0xe4f163b8
-	data4	0x31dccad7, 0x63851042, 0x97224013, 0xc6112084
-	data4	0x4a247d85, 0xbb3df8d2, 0xf93211ae, 0x29a16dc7
-	data4	0x9e2f4b1d, 0xb230f3dc, 0x8652ec0d, 0xc1e3d077
-	data4	0xb3166c2b, 0x70b999a9, 0x9448fa11, 0xe9642247
-	data4	0xfc8cc4a8, 0xf03f1aa0, 0x7d2cd856, 0x3390ef22
-	data4	0x494ec787, 0x38d1c1d9, 0xcaa2fe8c, 0xd40b3698
-	data4	0xf581cfa6, 0x7ade28a5, 0xb78e26da, 0xadbfa43f
-	data4	0x3a9de42c, 0x78920d50, 0x5fcc9b6a, 0x7e466254
-	data4	0x8d13c2f6, 0xd8b8e890, 0x39f75e2e, 0xc3aff582
-	data4	0x5d80be9f, 0xd0937c69, 0xd52da96f, 0x2512b3cf
-	data4	0xac993bc8, 0x187da710, 0x9c636ee8, 0x3bbb7bdb
-	data4	0x267809cd, 0x5918f46e, 0x9ab701ec, 0x4f9aa883
-	data4	0x956e65e6, 0xffe67eaa, 0xbccf0821, 0x15e8e6ef
-	data4	0xe79bd9ba, 0x6f36ce4a, 0x9f09d4ea, 0xb07cd629
-	data4	0xa4b2af31, 0x3f23312a, 0xa59430c6, 0xa266c035
-	data4	0x4ebc3774, 0x82caa6fc, 0x90d0b0e0, 0xa7d81533
-	data4	0x04984af1, 0xecdaf741, 0xcd500e7f, 0x91f62f17
-	data4	0x4dd68d76, 0xefb04d43, 0xaa4d54cc, 0x9604dfe4
-	data4	0xd1b5e39e, 0x6a881b4c, 0x2c1fb8c1, 0x65517f46
-	data4	0x5eea049d, 0x8c355d01, 0x877473fa, 0x0b412efb
-	data4	0x671d5ab3, 0xdbd25292, 0x105633e9, 0xd647136d
-	data4	0xd7618c9a, 0xa10c7a37, 0xf8148e59, 0x133c89eb
-	data4	0xa927eece, 0x61c935b7, 0x1ce5ede1, 0x47b13c7a
-	data4	0xd2df599c, 0xf2733f55, 0x14ce7918, 0xc737bf73
-	data4	0xf7cdea53, 0xfdaa5b5f, 0x3d6f14df, 0x44db8678
-	data4	0xaff381ca, 0x68c43eb9, 0x24342c38, 0xa3405fc2
-	data4	0x1dc37216, 0xe2250cbc, 0x3c498b28, 0x0d9541ff
-	data4	0xa8017139, 0x0cb3de08, 0xb4e49cd8, 0x56c19064
-	data4	0xcb84617b, 0x32b670d5, 0x6c5c7448, 0xb85742d0
-// Td4:
-	data4	0x52000000, 0x09000000, 0x6a000000, 0xd5000000
-	data4	0x30000000, 0x36000000, 0xa5000000, 0x38000000
-	data4	0xbf000000, 0x40000000, 0xa3000000, 0x9e000000
-	data4	0x81000000, 0xf3000000, 0xd7000000, 0xfb000000
-	data4	0x7c000000, 0xe3000000, 0x39000000, 0x82000000
-	data4	0x9b000000, 0x2f000000, 0xff000000, 0x87000000
-	data4	0x34000000, 0x8e000000, 0x43000000, 0x44000000
-	data4	0xc4000000, 0xde000000, 0xe9000000, 0xcb000000
-	data4	0x54000000, 0x7b000000, 0x94000000, 0x32000000
-	data4	0xa6000000, 0xc2000000, 0x23000000, 0x3d000000
-	data4	0xee000000, 0x4c000000, 0x95000000, 0x0b000000
-	data4	0x42000000, 0xfa000000, 0xc3000000, 0x4e000000
-	data4	0x08000000, 0x2e000000, 0xa1000000, 0x66000000
-	data4	0x28000000, 0xd9000000, 0x24000000, 0xb2000000
-	data4	0x76000000, 0x5b000000, 0xa2000000, 0x49000000
-	data4	0x6d000000, 0x8b000000, 0xd1000000, 0x25000000
-	data4	0x72000000, 0xf8000000, 0xf6000000, 0x64000000
-	data4	0x86000000, 0x68000000, 0x98000000, 0x16000000
-	data4	0xd4000000, 0xa4000000, 0x5c000000, 0xcc000000
-	data4	0x5d000000, 0x65000000, 0xb6000000, 0x92000000
-	data4	0x6c000000, 0x70000000, 0x48000000, 0x50000000
-	data4	0xfd000000, 0xed000000, 0xb9000000, 0xda000000
-	data4	0x5e000000, 0x15000000, 0x46000000, 0x57000000
-	data4	0xa7000000, 0x8d000000, 0x9d000000, 0x84000000
-	data4	0x90000000, 0xd8000000, 0xab000000, 0x00000000
-	data4	0x8c000000, 0xbc000000, 0xd3000000, 0x0a000000
-	data4	0xf7000000, 0xe4000000, 0x58000000, 0x05000000
-	data4	0xb8000000, 0xb3000000, 0x45000000, 0x06000000
-	data4	0xd0000000, 0x2c000000, 0x1e000000, 0x8f000000
-	data4	0xca000000, 0x3f000000, 0x0f000000, 0x02000000
-	data4	0xc1000000, 0xaf000000, 0xbd000000, 0x03000000
-	data4	0x01000000, 0x13000000, 0x8a000000, 0x6b000000
-	data4	0x3a000000, 0x91000000, 0x11000000, 0x41000000
-	data4	0x4f000000, 0x67000000, 0xdc000000, 0xea000000
-	data4	0x97000000, 0xf2000000, 0xcf000000, 0xce000000
-	data4	0xf0000000, 0xb4000000, 0xe6000000, 0x73000000
-	data4	0x96000000, 0xac000000, 0x74000000, 0x22000000
-	data4	0xe7000000, 0xad000000, 0x35000000, 0x85000000
-	data4	0xe2000000, 0xf9000000, 0x37000000, 0xe8000000
-	data4	0x1c000000, 0x75000000, 0xdf000000, 0x6e000000
-	data4	0x47000000, 0xf1000000, 0x1a000000, 0x71000000
-	data4	0x1d000000, 0x29000000, 0xc5000000, 0x89000000
-	data4	0x6f000000, 0xb7000000, 0x62000000, 0x0e000000
-	data4	0xaa000000, 0x18000000, 0xbe000000, 0x1b000000
-	data4	0xfc000000, 0x56000000, 0x3e000000, 0x4b000000
-	data4	0xc6000000, 0xd2000000, 0x79000000, 0x20000000
-	data4	0x9a000000, 0xdb000000, 0xc0000000, 0xfe000000
-	data4	0x78000000, 0xcd000000, 0x5a000000, 0xf4000000
-	data4	0x1f000000, 0xdd000000, 0xa8000000, 0x33000000
-	data4	0x88000000, 0x07000000, 0xc7000000, 0x31000000
-	data4	0xb1000000, 0x12000000, 0x10000000, 0x59000000
-	data4	0x27000000, 0x80000000, 0xec000000, 0x5f000000
-	data4	0x60000000, 0x51000000, 0x7f000000, 0xa9000000
-	data4	0x19000000, 0xb5000000, 0x4a000000, 0x0d000000
-	data4	0x2d000000, 0xe5000000, 0x7a000000, 0x9f000000
-	data4	0x93000000, 0xc9000000, 0x9c000000, 0xef000000
-	data4	0xa0000000, 0xe0000000, 0x3b000000, 0x4d000000
-	data4	0xae000000, 0x2a000000, 0xf5000000, 0xb0000000
-	data4	0xc8000000, 0xeb000000, 0xbb000000, 0x3c000000
-	data4	0x83000000, 0x53000000, 0x99000000, 0x61000000
-	data4	0x17000000, 0x2b000000, 0x04000000, 0x7e000000
-	data4	0xba000000, 0x77000000, 0xd6000000, 0x26000000
-	data4	0xe1000000, 0x69000000, 0x14000000, 0x63000000
-	data4	0x55000000, 0x21000000, 0x0c000000, 0x7d000000
-// Td5:
-	data4	0x00520000, 0x00090000, 0x006a0000, 0x00d50000
-	data4	0x00300000, 0x00360000, 0x00a50000, 0x00380000
-	data4	0x00bf0000, 0x00400000, 0x00a30000, 0x009e0000
-	data4	0x00810000, 0x00f30000, 0x00d70000, 0x00fb0000
-	data4	0x007c0000, 0x00e30000, 0x00390000, 0x00820000
-	data4	0x009b0000, 0x002f0000, 0x00ff0000, 0x00870000
-	data4	0x00340000, 0x008e0000, 0x00430000, 0x00440000
-	data4	0x00c40000, 0x00de0000, 0x00e90000, 0x00cb0000
-	data4	0x00540000, 0x007b0000, 0x00940000, 0x00320000
-	data4	0x00a60000, 0x00c20000, 0x00230000, 0x003d0000
-	data4	0x00ee0000, 0x004c0000, 0x00950000, 0x000b0000
-	data4	0x00420000, 0x00fa0000, 0x00c30000, 0x004e0000
-	data4	0x00080000, 0x002e0000, 0x00a10000, 0x00660000
-	data4	0x00280000, 0x00d90000, 0x00240000, 0x00b20000
-	data4	0x00760000, 0x005b0000, 0x00a20000, 0x00490000
-	data4	0x006d0000, 0x008b0000, 0x00d10000, 0x00250000
-	data4	0x00720000, 0x00f80000, 0x00f60000, 0x00640000
-	data4	0x00860000, 0x00680000, 0x00980000, 0x00160000
-	data4	0x00d40000, 0x00a40000, 0x005c0000, 0x00cc0000
-	data4	0x005d0000, 0x00650000, 0x00b60000, 0x00920000
-	data4	0x006c0000, 0x00700000, 0x00480000, 0x00500000
-	data4	0x00fd0000, 0x00ed0000, 0x00b90000, 0x00da0000
-	data4	0x005e0000, 0x00150000, 0x00460000, 0x00570000
-	data4	0x00a70000, 0x008d0000, 0x009d0000, 0x00840000
-	data4	0x00900000, 0x00d80000, 0x00ab0000, 0x00000000
-	data4	0x008c0000, 0x00bc0000, 0x00d30000, 0x000a0000
-	data4	0x00f70000, 0x00e40000, 0x00580000, 0x00050000
-	data4	0x00b80000, 0x00b30000, 0x00450000, 0x00060000
-	data4	0x00d00000, 0x002c0000, 0x001e0000, 0x008f0000
-	data4	0x00ca0000, 0x003f0000, 0x000f0000, 0x00020000
-	data4	0x00c10000, 0x00af0000, 0x00bd0000, 0x00030000
-	data4	0x00010000, 0x00130000, 0x008a0000, 0x006b0000
-	data4	0x003a0000, 0x00910000, 0x00110000, 0x00410000
-	data4	0x004f0000, 0x00670000, 0x00dc0000, 0x00ea0000
-	data4	0x00970000, 0x00f20000, 0x00cf0000, 0x00ce0000
-	data4	0x00f00000, 0x00b40000, 0x00e60000, 0x00730000
-	data4	0x00960000, 0x00ac0000, 0x00740000, 0x00220000
-	data4	0x00e70000, 0x00ad0000, 0x00350000, 0x00850000
-	data4	0x00e20000, 0x00f90000, 0x00370000, 0x00e80000
-	data4	0x001c0000, 0x00750000, 0x00df0000, 0x006e0000
-	data4	0x00470000, 0x00f10000, 0x001a0000, 0x00710000
-	data4	0x001d0000, 0x00290000, 0x00c50000, 0x00890000
-	data4	0x006f0000, 0x00b70000, 0x00620000, 0x000e0000
-	data4	0x00aa0000, 0x00180000, 0x00be0000, 0x001b0000
-	data4	0x00fc0000, 0x00560000, 0x003e0000, 0x004b0000
-	data4	0x00c60000, 0x00d20000, 0x00790000, 0x00200000
-	data4	0x009a0000, 0x00db0000, 0x00c00000, 0x00fe0000
-	data4	0x00780000, 0x00cd0000, 0x005a0000, 0x00f40000
-	data4	0x001f0000, 0x00dd0000, 0x00a80000, 0x00330000
-	data4	0x00880000, 0x00070000, 0x00c70000, 0x00310000
-	data4	0x00b10000, 0x00120000, 0x00100000, 0x00590000
-	data4	0x00270000, 0x00800000, 0x00ec0000, 0x005f0000
-	data4	0x00600000, 0x00510000, 0x007f0000, 0x00a90000
-	data4	0x00190000, 0x00b50000, 0x004a0000, 0x000d0000
-	data4	0x002d0000, 0x00e50000, 0x007a0000, 0x009f0000
-	data4	0x00930000, 0x00c90000, 0x009c0000, 0x00ef0000
-	data4	0x00a00000, 0x00e00000, 0x003b0000, 0x004d0000
-	data4	0x00ae0000, 0x002a0000, 0x00f50000, 0x00b00000
-	data4	0x00c80000, 0x00eb0000, 0x00bb0000, 0x003c0000
-	data4	0x00830000, 0x00530000, 0x00990000, 0x00610000
-	data4	0x00170000, 0x002b0000, 0x00040000, 0x007e0000
-	data4	0x00ba0000, 0x00770000, 0x00d60000, 0x00260000
-	data4	0x00e10000, 0x00690000, 0x00140000, 0x00630000
-	data4	0x00550000, 0x00210000, 0x000c0000, 0x007d0000
-// Td6:
-	data4	0x00005200, 0x00000900, 0x00006a00, 0x0000d500
-	data4	0x00003000, 0x00003600, 0x0000a500, 0x00003800
-	data4	0x0000bf00, 0x00004000, 0x0000a300, 0x00009e00
-	data4	0x00008100, 0x0000f300, 0x0000d700, 0x0000fb00
-	data4	0x00007c00, 0x0000e300, 0x00003900, 0x00008200
-	data4	0x00009b00, 0x00002f00, 0x0000ff00, 0x00008700
-	data4	0x00003400, 0x00008e00, 0x00004300, 0x00004400
-	data4	0x0000c400, 0x0000de00, 0x0000e900, 0x0000cb00
-	data4	0x00005400, 0x00007b00, 0x00009400, 0x00003200
-	data4	0x0000a600, 0x0000c200, 0x00002300, 0x00003d00
-	data4	0x0000ee00, 0x00004c00, 0x00009500, 0x00000b00
-	data4	0x00004200, 0x0000fa00, 0x0000c300, 0x00004e00
-	data4	0x00000800, 0x00002e00, 0x0000a100, 0x00006600
-	data4	0x00002800, 0x0000d900, 0x00002400, 0x0000b200
-	data4	0x00007600, 0x00005b00, 0x0000a200, 0x00004900
-	data4	0x00006d00, 0x00008b00, 0x0000d100, 0x00002500
-	data4	0x00007200, 0x0000f800, 0x0000f600, 0x00006400
-	data4	0x00008600, 0x00006800, 0x00009800, 0x00001600
-	data4	0x0000d400, 0x0000a400, 0x00005c00, 0x0000cc00
-	data4	0x00005d00, 0x00006500, 0x0000b600, 0x00009200
-	data4	0x00006c00, 0x00007000, 0x00004800, 0x00005000
-	data4	0x0000fd00, 0x0000ed00, 0x0000b900, 0x0000da00
-	data4	0x00005e00, 0x00001500, 0x00004600, 0x00005700
-	data4	0x0000a700, 0x00008d00, 0x00009d00, 0x00008400
-	data4	0x00009000, 0x0000d800, 0x0000ab00, 0x00000000
-	data4	0x00008c00, 0x0000bc00, 0x0000d300, 0x00000a00
-	data4	0x0000f700, 0x0000e400, 0x00005800, 0x00000500
-	data4	0x0000b800, 0x0000b300, 0x00004500, 0x00000600
-	data4	0x0000d000, 0x00002c00, 0x00001e00, 0x00008f00
-	data4	0x0000ca00, 0x00003f00, 0x00000f00, 0x00000200
-	data4	0x0000c100, 0x0000af00, 0x0000bd00, 0x00000300
-	data4	0x00000100, 0x00001300, 0x00008a00, 0x00006b00
-	data4	0x00003a00, 0x00009100, 0x00001100, 0x00004100
-	data4	0x00004f00, 0x00006700, 0x0000dc00, 0x0000ea00
-	data4	0x00009700, 0x0000f200, 0x0000cf00, 0x0000ce00
-	data4	0x0000f000, 0x0000b400, 0x0000e600, 0x00007300
-	data4	0x00009600, 0x0000ac00, 0x00007400, 0x00002200
-	data4	0x0000e700, 0x0000ad00, 0x00003500, 0x00008500
-	data4	0x0000e200, 0x0000f900, 0x00003700, 0x0000e800
-	data4	0x00001c00, 0x00007500, 0x0000df00, 0x00006e00
-	data4	0x00004700, 0x0000f100, 0x00001a00, 0x00007100
-	data4	0x00001d00, 0x00002900, 0x0000c500, 0x00008900
-	data4	0x00006f00, 0x0000b700, 0x00006200, 0x00000e00
-	data4	0x0000aa00, 0x00001800, 0x0000be00, 0x00001b00
-	data4	0x0000fc00, 0x00005600, 0x00003e00, 0x00004b00
-	data4	0x0000c600, 0x0000d200, 0x00007900, 0x00002000
-	data4	0x00009a00, 0x0000db00, 0x0000c000, 0x0000fe00
-	data4	0x00007800, 0x0000cd00, 0x00005a00, 0x0000f400
-	data4	0x00001f00, 0x0000dd00, 0x0000a800, 0x00003300
-	data4	0x00008800, 0x00000700, 0x0000c700, 0x00003100
-	data4	0x0000b100, 0x00001200, 0x00001000, 0x00005900
-	data4	0x00002700, 0x00008000, 0x0000ec00, 0x00005f00
-	data4	0x00006000, 0x00005100, 0x00007f00, 0x0000a900
-	data4	0x00001900, 0x0000b500, 0x00004a00, 0x00000d00
-	data4	0x00002d00, 0x0000e500, 0x00007a00, 0x00009f00
-	data4	0x00009300, 0x0000c900, 0x00009c00, 0x0000ef00
-	data4	0x0000a000, 0x0000e000, 0x00003b00, 0x00004d00
-	data4	0x0000ae00, 0x00002a00, 0x0000f500, 0x0000b000
-	data4	0x0000c800, 0x0000eb00, 0x0000bb00, 0x00003c00
-	data4	0x00008300, 0x00005300, 0x00009900, 0x00006100
-	data4	0x00001700, 0x00002b00, 0x00000400, 0x00007e00
-	data4	0x0000ba00, 0x00007700, 0x0000d600, 0x00002600
-	data4	0x0000e100, 0x00006900, 0x00001400, 0x00006300
-	data4	0x00005500, 0x00002100, 0x00000c00, 0x00007d00
-// Td7:
-	data4	0x00000052, 0x00000009, 0x0000006a, 0x000000d5
-	data4	0x00000030, 0x00000036, 0x000000a5, 0x00000038
-	data4	0x000000bf, 0x00000040, 0x000000a3, 0x0000009e
-	data4	0x00000081, 0x000000f3, 0x000000d7, 0x000000fb
-	data4	0x0000007c, 0x000000e3, 0x00000039, 0x00000082
-	data4	0x0000009b, 0x0000002f, 0x000000ff, 0x00000087
-	data4	0x00000034, 0x0000008e, 0x00000043, 0x00000044
-	data4	0x000000c4, 0x000000de, 0x000000e9, 0x000000cb
-	data4	0x00000054, 0x0000007b, 0x00000094, 0x00000032
-	data4	0x000000a6, 0x000000c2, 0x00000023, 0x0000003d
-	data4	0x000000ee, 0x0000004c, 0x00000095, 0x0000000b
-	data4	0x00000042, 0x000000fa, 0x000000c3, 0x0000004e
-	data4	0x00000008, 0x0000002e, 0x000000a1, 0x00000066
-	data4	0x00000028, 0x000000d9, 0x00000024, 0x000000b2
-	data4	0x00000076, 0x0000005b, 0x000000a2, 0x00000049
-	data4	0x0000006d, 0x0000008b, 0x000000d1, 0x00000025
-	data4	0x00000072, 0x000000f8, 0x000000f6, 0x00000064
-	data4	0x00000086, 0x00000068, 0x00000098, 0x00000016
-	data4	0x000000d4, 0x000000a4, 0x0000005c, 0x000000cc
-	data4	0x0000005d, 0x00000065, 0x000000b6, 0x00000092
-	data4	0x0000006c, 0x00000070, 0x00000048, 0x00000050
-	data4	0x000000fd, 0x000000ed, 0x000000b9, 0x000000da
-	data4	0x0000005e, 0x00000015, 0x00000046, 0x00000057
-	data4	0x000000a7, 0x0000008d, 0x0000009d, 0x00000084
-	data4	0x00000090, 0x000000d8, 0x000000ab, 0x00000000
-	data4	0x0000008c, 0x000000bc, 0x000000d3, 0x0000000a
-	data4	0x000000f7, 0x000000e4, 0x00000058, 0x00000005
-	data4	0x000000b8, 0x000000b3, 0x00000045, 0x00000006
-	data4	0x000000d0, 0x0000002c, 0x0000001e, 0x0000008f
-	data4	0x000000ca, 0x0000003f, 0x0000000f, 0x00000002
-	data4	0x000000c1, 0x000000af, 0x000000bd, 0x00000003
-	data4	0x00000001, 0x00000013, 0x0000008a, 0x0000006b
-	data4	0x0000003a, 0x00000091, 0x00000011, 0x00000041
-	data4	0x0000004f, 0x00000067, 0x000000dc, 0x000000ea
-	data4	0x00000097, 0x000000f2, 0x000000cf, 0x000000ce
-	data4	0x000000f0, 0x000000b4, 0x000000e6, 0x00000073
-	data4	0x00000096, 0x000000ac, 0x00000074, 0x00000022
-	data4	0x000000e7, 0x000000ad, 0x00000035, 0x00000085
-	data4	0x000000e2, 0x000000f9, 0x00000037, 0x000000e8
-	data4	0x0000001c, 0x00000075, 0x000000df, 0x0000006e
-	data4	0x00000047, 0x000000f1, 0x0000001a, 0x00000071
-	data4	0x0000001d, 0x00000029, 0x000000c5, 0x00000089
-	data4	0x0000006f, 0x000000b7, 0x00000062, 0x0000000e
-	data4	0x000000aa, 0x00000018, 0x000000be, 0x0000001b
-	data4	0x000000fc, 0x00000056, 0x0000003e, 0x0000004b
-	data4	0x000000c6, 0x000000d2, 0x00000079, 0x00000020
-	data4	0x0000009a, 0x000000db, 0x000000c0, 0x000000fe
-	data4	0x00000078, 0x000000cd, 0x0000005a, 0x000000f4
-	data4	0x0000001f, 0x000000dd, 0x000000a8, 0x00000033
-	data4	0x00000088, 0x00000007, 0x000000c7, 0x00000031
-	data4	0x000000b1, 0x00000012, 0x00000010, 0x00000059
-	data4	0x00000027, 0x00000080, 0x000000ec, 0x0000005f
-	data4	0x00000060, 0x00000051, 0x0000007f, 0x000000a9
-	data4	0x00000019, 0x000000b5, 0x0000004a, 0x0000000d
-	data4	0x0000002d, 0x000000e5, 0x0000007a, 0x0000009f
-	data4	0x00000093, 0x000000c9, 0x0000009c, 0x000000ef
-	data4	0x000000a0, 0x000000e0, 0x0000003b, 0x0000004d
-	data4	0x000000ae, 0x0000002a, 0x000000f5, 0x000000b0
-	data4	0x000000c8, 0x000000eb, 0x000000bb, 0x0000003c
-	data4	0x00000083, 0x00000053, 0x00000099, 0x00000061
-	data4	0x00000017, 0x0000002b, 0x00000004, 0x0000007e
-	data4	0x000000ba, 0x00000077, 0x000000d6, 0x00000026
-	data4	0x000000e1, 0x00000069, 0x00000014, 0x00000063
-	data4	0x00000055, 0x00000021, 0x0000000c, 0x0000007d
-.size	AES_Td#,8*256*4	// HP-UX assembler fails to ".-AES_Td#"
diff --git a/crypto/openssl/crypto/asn1/Makefile b/crypto/openssl/crypto/asn1/Makefile
deleted file mode 100644
index f67c5ebd711a..000000000000
--- a/crypto/openssl/crypto/asn1/Makefile
+++ /dev/null
@@ -1,870 +0,0 @@
-#
-# OpenSSL/crypto/asn1/Makefile
-#
-
-DIR=	asn1
-TOP=	../..
-CC=	cc
-INCLUDES= -I.. -I$(TOP) -I../../include
-CFLAG=-g
-MAKEFILE=	Makefile
-AR=		ar r
-
-CFLAGS= $(INCLUDES) $(CFLAG)
-
-GENERAL=Makefile README
-TEST=
-APPS=
-
-LIB=$(TOP)/libcrypto.a
-LIBSRC=	a_object.c a_bitstr.c a_utctm.c a_gentm.c a_time.c a_int.c a_octet.c \
-	a_print.c a_type.c a_set.c a_dup.c a_d2i_fp.c a_i2d_fp.c \
-	a_enum.c a_utf8.c a_sign.c a_digest.c a_verify.c a_mbstr.c a_strex.c \
-	x_algor.c x_val.c x_pubkey.c x_sig.c x_req.c x_attrib.c x_bignum.c \
-	x_long.c x_name.c x_x509.c x_x509a.c x_crl.c x_info.c x_spki.c nsseq.c \
-	d2i_pu.c d2i_pr.c i2d_pu.c i2d_pr.c\
-	t_req.c t_x509.c t_x509a.c t_crl.c t_pkey.c t_spki.c t_bitst.c \
-	tasn_new.c tasn_fre.c tasn_enc.c tasn_dec.c tasn_utl.c tasn_typ.c \
-	f_int.c f_string.c n_pkey.c \
-	f_enum.c a_hdr.c x_pkey.c a_bool.c x_exten.c \
-	asn1_gen.c asn1_par.c asn1_lib.c asn1_err.c a_meth.c a_bytes.c a_strnid.c \
-	evp_asn1.c asn_pack.c p5_pbe.c p5_pbev2.c p8_pkey.c asn_moid.c
-LIBOBJ= a_object.o a_bitstr.o a_utctm.o a_gentm.o a_time.o a_int.o a_octet.o \
-	a_print.o a_type.o a_set.o a_dup.o a_d2i_fp.o a_i2d_fp.o \
-	a_enum.o a_utf8.o a_sign.o a_digest.o a_verify.o a_mbstr.o a_strex.o \
-	x_algor.o x_val.o x_pubkey.o x_sig.o x_req.o x_attrib.o x_bignum.o \
-	x_long.o x_name.o x_x509.o x_x509a.o x_crl.o x_info.o x_spki.o nsseq.o \
-	d2i_pu.o d2i_pr.o i2d_pu.o i2d_pr.o \
-	t_req.o t_x509.o t_x509a.o t_crl.o t_pkey.o t_spki.o t_bitst.o \
-	tasn_new.o tasn_fre.o tasn_enc.o tasn_dec.o tasn_utl.o tasn_typ.o \
-	f_int.o f_string.o n_pkey.o \
-	f_enum.o a_hdr.o x_pkey.o a_bool.o x_exten.o \
-	asn1_gen.o asn1_par.o asn1_lib.o asn1_err.o a_meth.o a_bytes.o a_strnid.o \
-	evp_asn1.o asn_pack.o p5_pbe.o p5_pbev2.o p8_pkey.o asn_moid.o
-
-SRC= $(LIBSRC)
-
-EXHEADER=  asn1.h asn1_mac.h asn1t.h
-HEADER=	$(EXHEADER)
-
-ALL=    $(GENERAL) $(SRC) $(HEADER)
-
-top:
-	(cd ../..; $(MAKE) DIRS=crypto SDIRS=$(DIR) sub_all)
-
-test:	test.c
-	cc -g -I../../include -c test.c
-	cc -g -I../../include -o test test.o -L../.. -lcrypto
-
-pk:	pk.c
-	cc -g -I../../include -c pk.c
-	cc -g -I../../include -o pk pk.o -L../.. -lcrypto
-
-all:	lib
-
-lib:	$(LIBOBJ)
-	$(AR) $(LIB) $(LIBOBJ)
-	$(RANLIB) $(LIB) || echo Never mind.
-	@touch lib
-
-files:
-	$(PERL) $(TOP)/util/files.pl Makefile >> $(TOP)/MINFO
-
-links:
-	@$(PERL) $(TOP)/util/mklink.pl ../../include/openssl $(EXHEADER)
-	@$(PERL) $(TOP)/util/mklink.pl ../../test $(TEST)
-	@$(PERL) $(TOP)/util/mklink.pl ../../apps $(APPS)
-
-install:
-	@[ -n "$(INSTALLTOP)" ] # should be set by top Makefile...
-	@headerlist="$(EXHEADER)"; for i in $$headerlist ; \
-	do  \
-	(cp $$i $(INSTALL_PREFIX)$(INSTALLTOP)/include/openssl/$$i; \
-	chmod 644 $(INSTALL_PREFIX)$(INSTALLTOP)/include/openssl/$$i ); \
-	done;
-
-tags:
-	ctags $(SRC)
-
-tests:
-
-lint:
-	lint -DLINT $(INCLUDES) $(SRC)>fluff
-
-depend:
-	@[ -n "$(MAKEDEPEND)" ] # should be set by top Makefile...
-	$(MAKEDEPEND) -- $(CFLAG) $(INCLUDES) $(DEPFLAG) -- $(PROGS) $(LIBSRC)
-
-dclean:
-	$(PERL) -pe 'if (/^# DO NOT DELETE THIS LINE/) {print; exit(0);}' $(MAKEFILE) >Makefile.new
-	mv -f Makefile.new $(MAKEFILE)
-
-clean:
-	rm -f *.o *.obj lib tags core .pure .nfs* *.old *.bak fluff
-
-
-# DO NOT DELETE THIS LINE -- make depend depends on it.
-
-a_bitstr.o: ../../e_os.h ../../include/openssl/asn1.h
-a_bitstr.o: ../../include/openssl/bio.h ../../include/openssl/buffer.h
-a_bitstr.o: ../../include/openssl/crypto.h ../../include/openssl/e_os2.h
-a_bitstr.o: ../../include/openssl/err.h ../../include/openssl/lhash.h
-a_bitstr.o: ../../include/openssl/opensslconf.h
-a_bitstr.o: ../../include/openssl/opensslv.h ../../include/openssl/ossl_typ.h
-a_bitstr.o: ../../include/openssl/safestack.h ../../include/openssl/stack.h
-a_bitstr.o: ../../include/openssl/symhacks.h ../cryptlib.h a_bitstr.c
-a_bool.o: ../../e_os.h ../../include/openssl/asn1.h
-a_bool.o: ../../include/openssl/asn1t.h ../../include/openssl/bio.h
-a_bool.o: ../../include/openssl/buffer.h ../../include/openssl/crypto.h
-a_bool.o: ../../include/openssl/e_os2.h ../../include/openssl/err.h
-a_bool.o: ../../include/openssl/lhash.h ../../include/openssl/opensslconf.h
-a_bool.o: ../../include/openssl/opensslv.h ../../include/openssl/ossl_typ.h
-a_bool.o: ../../include/openssl/safestack.h ../../include/openssl/stack.h
-a_bool.o: ../../include/openssl/symhacks.h ../cryptlib.h a_bool.c
-a_bytes.o: ../../e_os.h ../../include/openssl/asn1.h
-a_bytes.o: ../../include/openssl/bio.h ../../include/openssl/buffer.h
-a_bytes.o: ../../include/openssl/crypto.h ../../include/openssl/e_os2.h
-a_bytes.o: ../../include/openssl/err.h ../../include/openssl/lhash.h
-a_bytes.o: ../../include/openssl/opensslconf.h ../../include/openssl/opensslv.h
-a_bytes.o: ../../include/openssl/ossl_typ.h ../../include/openssl/safestack.h
-a_bytes.o: ../../include/openssl/stack.h ../../include/openssl/symhacks.h
-a_bytes.o: ../cryptlib.h a_bytes.c
-a_d2i_fp.o: ../../e_os.h ../../include/openssl/asn1.h
-a_d2i_fp.o: ../../include/openssl/asn1_mac.h ../../include/openssl/bio.h
-a_d2i_fp.o: ../../include/openssl/buffer.h ../../include/openssl/crypto.h
-a_d2i_fp.o: ../../include/openssl/e_os2.h ../../include/openssl/err.h
-a_d2i_fp.o: ../../include/openssl/lhash.h ../../include/openssl/opensslconf.h
-a_d2i_fp.o: ../../include/openssl/opensslv.h ../../include/openssl/ossl_typ.h
-a_d2i_fp.o: ../../include/openssl/safestack.h ../../include/openssl/stack.h
-a_d2i_fp.o: ../../include/openssl/symhacks.h ../cryptlib.h a_d2i_fp.c
-a_digest.o: ../../e_os.h ../../include/openssl/asn1.h
-a_digest.o: ../../include/openssl/bio.h ../../include/openssl/buffer.h
-a_digest.o: ../../include/openssl/crypto.h ../../include/openssl/e_os2.h
-a_digest.o: ../../include/openssl/ec.h ../../include/openssl/ecdh.h
-a_digest.o: ../../include/openssl/ecdsa.h ../../include/openssl/err.h
-a_digest.o: ../../include/openssl/evp.h ../../include/openssl/lhash.h
-a_digest.o: ../../include/openssl/obj_mac.h ../../include/openssl/objects.h
-a_digest.o: ../../include/openssl/opensslconf.h
-a_digest.o: ../../include/openssl/opensslv.h ../../include/openssl/ossl_typ.h
-a_digest.o: ../../include/openssl/pkcs7.h ../../include/openssl/safestack.h
-a_digest.o: ../../include/openssl/sha.h ../../include/openssl/stack.h
-a_digest.o: ../../include/openssl/symhacks.h ../../include/openssl/x509.h
-a_digest.o: ../../include/openssl/x509_vfy.h ../cryptlib.h a_digest.c
-a_dup.o: ../../e_os.h ../../include/openssl/asn1.h ../../include/openssl/bio.h
-a_dup.o: ../../include/openssl/buffer.h ../../include/openssl/crypto.h
-a_dup.o: ../../include/openssl/e_os2.h ../../include/openssl/err.h
-a_dup.o: ../../include/openssl/lhash.h ../../include/openssl/opensslconf.h
-a_dup.o: ../../include/openssl/opensslv.h ../../include/openssl/ossl_typ.h
-a_dup.o: ../../include/openssl/safestack.h ../../include/openssl/stack.h
-a_dup.o: ../../include/openssl/symhacks.h ../cryptlib.h a_dup.c
-a_enum.o: ../../e_os.h ../../include/openssl/asn1.h ../../include/openssl/bio.h
-a_enum.o: ../../include/openssl/bn.h ../../include/openssl/buffer.h
-a_enum.o: ../../include/openssl/crypto.h ../../include/openssl/e_os2.h
-a_enum.o: ../../include/openssl/err.h ../../include/openssl/lhash.h
-a_enum.o: ../../include/openssl/opensslconf.h ../../include/openssl/opensslv.h
-a_enum.o: ../../include/openssl/ossl_typ.h ../../include/openssl/safestack.h
-a_enum.o: ../../include/openssl/stack.h ../../include/openssl/symhacks.h
-a_enum.o: ../cryptlib.h a_enum.c
-a_gentm.o: ../../e_os.h ../../include/openssl/asn1.h
-a_gentm.o: ../../include/openssl/bio.h ../../include/openssl/buffer.h
-a_gentm.o: ../../include/openssl/crypto.h ../../include/openssl/e_os2.h
-a_gentm.o: ../../include/openssl/err.h ../../include/openssl/lhash.h
-a_gentm.o: ../../include/openssl/opensslconf.h ../../include/openssl/opensslv.h
-a_gentm.o: ../../include/openssl/ossl_typ.h ../../include/openssl/safestack.h
-a_gentm.o: ../../include/openssl/stack.h ../../include/openssl/symhacks.h
-a_gentm.o: ../cryptlib.h ../o_time.h a_gentm.c
-a_hdr.o: ../../e_os.h ../../include/openssl/asn1.h
-a_hdr.o: ../../include/openssl/asn1_mac.h ../../include/openssl/bio.h
-a_hdr.o: ../../include/openssl/buffer.h ../../include/openssl/crypto.h
-a_hdr.o: ../../include/openssl/e_os2.h ../../include/openssl/err.h
-a_hdr.o: ../../include/openssl/lhash.h ../../include/openssl/opensslconf.h
-a_hdr.o: ../../include/openssl/opensslv.h ../../include/openssl/ossl_typ.h
-a_hdr.o: ../../include/openssl/safestack.h ../../include/openssl/stack.h
-a_hdr.o: ../../include/openssl/symhacks.h ../cryptlib.h a_hdr.c
-a_i2d_fp.o: ../../e_os.h ../../include/openssl/asn1.h
-a_i2d_fp.o: ../../include/openssl/bio.h ../../include/openssl/buffer.h
-a_i2d_fp.o: ../../include/openssl/crypto.h ../../include/openssl/e_os2.h
-a_i2d_fp.o: ../../include/openssl/err.h ../../include/openssl/lhash.h
-a_i2d_fp.o: ../../include/openssl/opensslconf.h
-a_i2d_fp.o: ../../include/openssl/opensslv.h ../../include/openssl/ossl_typ.h
-a_i2d_fp.o: ../../include/openssl/safestack.h ../../include/openssl/stack.h
-a_i2d_fp.o: ../../include/openssl/symhacks.h ../cryptlib.h a_i2d_fp.c
-a_int.o: ../../e_os.h ../../include/openssl/asn1.h ../../include/openssl/bio.h
-a_int.o: ../../include/openssl/bn.h ../../include/openssl/buffer.h
-a_int.o: ../../include/openssl/crypto.h ../../include/openssl/e_os2.h
-a_int.o: ../../include/openssl/err.h ../../include/openssl/lhash.h
-a_int.o: ../../include/openssl/opensslconf.h ../../include/openssl/opensslv.h
-a_int.o: ../../include/openssl/ossl_typ.h ../../include/openssl/safestack.h
-a_int.o: ../../include/openssl/stack.h ../../include/openssl/symhacks.h
-a_int.o: ../cryptlib.h a_int.c
-a_mbstr.o: ../../e_os.h ../../include/openssl/asn1.h
-a_mbstr.o: ../../include/openssl/bio.h ../../include/openssl/buffer.h
-a_mbstr.o: ../../include/openssl/crypto.h ../../include/openssl/e_os2.h
-a_mbstr.o: ../../include/openssl/err.h ../../include/openssl/lhash.h
-a_mbstr.o: ../../include/openssl/opensslconf.h ../../include/openssl/opensslv.h
-a_mbstr.o: ../../include/openssl/ossl_typ.h ../../include/openssl/safestack.h
-a_mbstr.o: ../../include/openssl/stack.h ../../include/openssl/symhacks.h
-a_mbstr.o: ../cryptlib.h a_mbstr.c
-a_meth.o: ../../e_os.h ../../include/openssl/asn1.h ../../include/openssl/bio.h
-a_meth.o: ../../include/openssl/buffer.h ../../include/openssl/crypto.h
-a_meth.o: ../../include/openssl/e_os2.h ../../include/openssl/err.h
-a_meth.o: ../../include/openssl/lhash.h ../../include/openssl/opensslconf.h
-a_meth.o: ../../include/openssl/opensslv.h ../../include/openssl/ossl_typ.h
-a_meth.o: ../../include/openssl/safestack.h ../../include/openssl/stack.h
-a_meth.o: ../../include/openssl/symhacks.h ../cryptlib.h a_meth.c
-a_object.o: ../../e_os.h ../../include/openssl/asn1.h
-a_object.o: ../../include/openssl/bio.h ../../include/openssl/buffer.h
-a_object.o: ../../include/openssl/crypto.h ../../include/openssl/e_os2.h
-a_object.o: ../../include/openssl/err.h ../../include/openssl/lhash.h
-a_object.o: ../../include/openssl/obj_mac.h ../../include/openssl/objects.h
-a_object.o: ../../include/openssl/opensslconf.h
-a_object.o: ../../include/openssl/opensslv.h ../../include/openssl/ossl_typ.h
-a_object.o: ../../include/openssl/safestack.h ../../include/openssl/stack.h
-a_object.o: ../../include/openssl/symhacks.h ../cryptlib.h a_object.c
-a_octet.o: ../../e_os.h ../../include/openssl/asn1.h
-a_octet.o: ../../include/openssl/bio.h ../../include/openssl/buffer.h
-a_octet.o: ../../include/openssl/crypto.h ../../include/openssl/e_os2.h
-a_octet.o: ../../include/openssl/err.h ../../include/openssl/lhash.h
-a_octet.o: ../../include/openssl/opensslconf.h ../../include/openssl/opensslv.h
-a_octet.o: ../../include/openssl/ossl_typ.h ../../include/openssl/safestack.h
-a_octet.o: ../../include/openssl/stack.h ../../include/openssl/symhacks.h
-a_octet.o: ../cryptlib.h a_octet.c
-a_print.o: ../../e_os.h ../../include/openssl/asn1.h
-a_print.o: ../../include/openssl/bio.h ../../include/openssl/buffer.h
-a_print.o: ../../include/openssl/crypto.h ../../include/openssl/e_os2.h
-a_print.o: ../../include/openssl/err.h ../../include/openssl/lhash.h
-a_print.o: ../../include/openssl/opensslconf.h ../../include/openssl/opensslv.h
-a_print.o: ../../include/openssl/ossl_typ.h ../../include/openssl/safestack.h
-a_print.o: ../../include/openssl/stack.h ../../include/openssl/symhacks.h
-a_print.o: ../cryptlib.h a_print.c
-a_set.o: ../../e_os.h ../../include/openssl/asn1.h
-a_set.o: ../../include/openssl/asn1_mac.h ../../include/openssl/bio.h
-a_set.o: ../../include/openssl/buffer.h ../../include/openssl/crypto.h
-a_set.o: ../../include/openssl/e_os2.h ../../include/openssl/err.h
-a_set.o: ../../include/openssl/lhash.h ../../include/openssl/opensslconf.h
-a_set.o: ../../include/openssl/opensslv.h ../../include/openssl/ossl_typ.h
-a_set.o: ../../include/openssl/safestack.h ../../include/openssl/stack.h
-a_set.o: ../../include/openssl/symhacks.h ../cryptlib.h a_set.c
-a_sign.o: ../../e_os.h ../../include/openssl/asn1.h ../../include/openssl/bio.h
-a_sign.o: ../../include/openssl/bn.h ../../include/openssl/buffer.h
-a_sign.o: ../../include/openssl/crypto.h ../../include/openssl/e_os2.h
-a_sign.o: ../../include/openssl/ec.h ../../include/openssl/ecdh.h
-a_sign.o: ../../include/openssl/ecdsa.h ../../include/openssl/err.h
-a_sign.o: ../../include/openssl/evp.h ../../include/openssl/lhash.h
-a_sign.o: ../../include/openssl/obj_mac.h ../../include/openssl/objects.h
-a_sign.o: ../../include/openssl/opensslconf.h ../../include/openssl/opensslv.h
-a_sign.o: ../../include/openssl/ossl_typ.h ../../include/openssl/pkcs7.h
-a_sign.o: ../../include/openssl/safestack.h ../../include/openssl/sha.h
-a_sign.o: ../../include/openssl/stack.h ../../include/openssl/symhacks.h
-a_sign.o: ../../include/openssl/x509.h ../../include/openssl/x509_vfy.h
-a_sign.o: ../cryptlib.h a_sign.c
-a_strex.o: ../../e_os.h ../../include/openssl/asn1.h
-a_strex.o: ../../include/openssl/bio.h ../../include/openssl/buffer.h
-a_strex.o: ../../include/openssl/crypto.h ../../include/openssl/e_os2.h
-a_strex.o: ../../include/openssl/ec.h ../../include/openssl/ecdh.h
-a_strex.o: ../../include/openssl/ecdsa.h ../../include/openssl/err.h
-a_strex.o: ../../include/openssl/evp.h ../../include/openssl/lhash.h
-a_strex.o: ../../include/openssl/obj_mac.h ../../include/openssl/objects.h
-a_strex.o: ../../include/openssl/opensslconf.h ../../include/openssl/opensslv.h
-a_strex.o: ../../include/openssl/ossl_typ.h ../../include/openssl/pkcs7.h
-a_strex.o: ../../include/openssl/safestack.h ../../include/openssl/sha.h
-a_strex.o: ../../include/openssl/stack.h ../../include/openssl/symhacks.h
-a_strex.o: ../../include/openssl/x509.h ../../include/openssl/x509_vfy.h
-a_strex.o: ../cryptlib.h a_strex.c charmap.h
-a_strnid.o: ../../e_os.h ../../include/openssl/asn1.h
-a_strnid.o: ../../include/openssl/bio.h ../../include/openssl/buffer.h
-a_strnid.o: ../../include/openssl/crypto.h ../../include/openssl/e_os2.h
-a_strnid.o: ../../include/openssl/err.h ../../include/openssl/lhash.h
-a_strnid.o: ../../include/openssl/obj_mac.h ../../include/openssl/objects.h
-a_strnid.o: ../../include/openssl/opensslconf.h
-a_strnid.o: ../../include/openssl/opensslv.h ../../include/openssl/ossl_typ.h
-a_strnid.o: ../../include/openssl/safestack.h ../../include/openssl/stack.h
-a_strnid.o: ../../include/openssl/symhacks.h ../cryptlib.h a_strnid.c
-a_time.o: ../../e_os.h ../../include/openssl/asn1.h
-a_time.o: ../../include/openssl/asn1t.h ../../include/openssl/bio.h
-a_time.o: ../../include/openssl/buffer.h ../../include/openssl/crypto.h
-a_time.o: ../../include/openssl/e_os2.h ../../include/openssl/err.h
-a_time.o: ../../include/openssl/lhash.h ../../include/openssl/opensslconf.h
-a_time.o: ../../include/openssl/opensslv.h ../../include/openssl/ossl_typ.h
-a_time.o: ../../include/openssl/safestack.h ../../include/openssl/stack.h
-a_time.o: ../../include/openssl/symhacks.h ../cryptlib.h ../o_time.h a_time.c
-a_type.o: ../../e_os.h ../../include/openssl/asn1.h
-a_type.o: ../../include/openssl/asn1t.h ../../include/openssl/bio.h
-a_type.o: ../../include/openssl/buffer.h ../../include/openssl/crypto.h
-a_type.o: ../../include/openssl/e_os2.h ../../include/openssl/err.h
-a_type.o: ../../include/openssl/lhash.h ../../include/openssl/opensslconf.h
-a_type.o: ../../include/openssl/opensslv.h ../../include/openssl/ossl_typ.h
-a_type.o: ../../include/openssl/safestack.h ../../include/openssl/stack.h
-a_type.o: ../../include/openssl/symhacks.h ../cryptlib.h a_type.c
-a_utctm.o: ../../e_os.h ../../include/openssl/asn1.h
-a_utctm.o: ../../include/openssl/bio.h ../../include/openssl/buffer.h
-a_utctm.o: ../../include/openssl/crypto.h ../../include/openssl/e_os2.h
-a_utctm.o: ../../include/openssl/err.h ../../include/openssl/lhash.h
-a_utctm.o: ../../include/openssl/opensslconf.h ../../include/openssl/opensslv.h
-a_utctm.o: ../../include/openssl/ossl_typ.h ../../include/openssl/safestack.h
-a_utctm.o: ../../include/openssl/stack.h ../../include/openssl/symhacks.h
-a_utctm.o: ../cryptlib.h ../o_time.h a_utctm.c
-a_utf8.o: ../../e_os.h ../../include/openssl/asn1.h ../../include/openssl/bio.h
-a_utf8.o: ../../include/openssl/buffer.h ../../include/openssl/crypto.h
-a_utf8.o: ../../include/openssl/e_os2.h ../../include/openssl/err.h
-a_utf8.o: ../../include/openssl/lhash.h ../../include/openssl/opensslconf.h
-a_utf8.o: ../../include/openssl/opensslv.h ../../include/openssl/ossl_typ.h
-a_utf8.o: ../../include/openssl/safestack.h ../../include/openssl/stack.h
-a_utf8.o: ../../include/openssl/symhacks.h ../cryptlib.h a_utf8.c
-a_verify.o: ../../e_os.h ../../include/openssl/asn1.h
-a_verify.o: ../../include/openssl/bio.h ../../include/openssl/bn.h
-a_verify.o: ../../include/openssl/buffer.h ../../include/openssl/crypto.h
-a_verify.o: ../../include/openssl/e_os2.h ../../include/openssl/ec.h
-a_verify.o: ../../include/openssl/ecdh.h ../../include/openssl/ecdsa.h
-a_verify.o: ../../include/openssl/err.h ../../include/openssl/evp.h
-a_verify.o: ../../include/openssl/lhash.h ../../include/openssl/obj_mac.h
-a_verify.o: ../../include/openssl/objects.h ../../include/openssl/opensslconf.h
-a_verify.o: ../../include/openssl/opensslv.h ../../include/openssl/ossl_typ.h
-a_verify.o: ../../include/openssl/pkcs7.h ../../include/openssl/safestack.h
-a_verify.o: ../../include/openssl/sha.h ../../include/openssl/stack.h
-a_verify.o: ../../include/openssl/symhacks.h ../../include/openssl/x509.h
-a_verify.o: ../../include/openssl/x509_vfy.h ../cryptlib.h a_verify.c
-asn1_err.o: ../../include/openssl/asn1.h ../../include/openssl/bio.h
-asn1_err.o: ../../include/openssl/crypto.h ../../include/openssl/e_os2.h
-asn1_err.o: ../../include/openssl/err.h ../../include/openssl/lhash.h
-asn1_err.o: ../../include/openssl/opensslconf.h
-asn1_err.o: ../../include/openssl/opensslv.h ../../include/openssl/ossl_typ.h
-asn1_err.o: ../../include/openssl/safestack.h ../../include/openssl/stack.h
-asn1_err.o: ../../include/openssl/symhacks.h asn1_err.c
-asn1_gen.o: ../../e_os.h ../../include/openssl/asn1.h
-asn1_gen.o: ../../include/openssl/bio.h ../../include/openssl/buffer.h
-asn1_gen.o: ../../include/openssl/conf.h ../../include/openssl/crypto.h
-asn1_gen.o: ../../include/openssl/e_os2.h ../../include/openssl/ec.h
-asn1_gen.o: ../../include/openssl/ecdh.h ../../include/openssl/ecdsa.h
-asn1_gen.o: ../../include/openssl/err.h ../../include/openssl/evp.h
-asn1_gen.o: ../../include/openssl/lhash.h ../../include/openssl/obj_mac.h
-asn1_gen.o: ../../include/openssl/objects.h ../../include/openssl/opensslconf.h
-asn1_gen.o: ../../include/openssl/opensslv.h ../../include/openssl/ossl_typ.h
-asn1_gen.o: ../../include/openssl/pkcs7.h ../../include/openssl/safestack.h
-asn1_gen.o: ../../include/openssl/sha.h ../../include/openssl/stack.h
-asn1_gen.o: ../../include/openssl/symhacks.h ../../include/openssl/x509.h
-asn1_gen.o: ../../include/openssl/x509_vfy.h ../../include/openssl/x509v3.h
-asn1_gen.o: ../cryptlib.h asn1_gen.c
-asn1_lib.o: ../../e_os.h ../../include/openssl/asn1.h
-asn1_lib.o: ../../include/openssl/asn1_mac.h ../../include/openssl/bio.h
-asn1_lib.o: ../../include/openssl/buffer.h ../../include/openssl/crypto.h
-asn1_lib.o: ../../include/openssl/e_os2.h ../../include/openssl/err.h
-asn1_lib.o: ../../include/openssl/lhash.h ../../include/openssl/opensslconf.h
-asn1_lib.o: ../../include/openssl/opensslv.h ../../include/openssl/ossl_typ.h
-asn1_lib.o: ../../include/openssl/safestack.h ../../include/openssl/stack.h
-asn1_lib.o: ../../include/openssl/symhacks.h ../cryptlib.h asn1_lib.c
-asn1_par.o: ../../e_os.h ../../include/openssl/asn1.h
-asn1_par.o: ../../include/openssl/bio.h ../../include/openssl/buffer.h
-asn1_par.o: ../../include/openssl/crypto.h ../../include/openssl/e_os2.h
-asn1_par.o: ../../include/openssl/err.h ../../include/openssl/lhash.h
-asn1_par.o: ../../include/openssl/obj_mac.h ../../include/openssl/objects.h
-asn1_par.o: ../../include/openssl/opensslconf.h
-asn1_par.o: ../../include/openssl/opensslv.h ../../include/openssl/ossl_typ.h
-asn1_par.o: ../../include/openssl/safestack.h ../../include/openssl/stack.h
-asn1_par.o: ../../include/openssl/symhacks.h ../cryptlib.h asn1_par.c
-asn_moid.o: ../../e_os.h ../../include/openssl/asn1.h
-asn_moid.o: ../../include/openssl/bio.h ../../include/openssl/buffer.h
-asn_moid.o: ../../include/openssl/conf.h ../../include/openssl/crypto.h
-asn_moid.o: ../../include/openssl/dso.h ../../include/openssl/e_os2.h
-asn_moid.o: ../../include/openssl/ec.h ../../include/openssl/ecdh.h
-asn_moid.o: ../../include/openssl/ecdsa.h ../../include/openssl/err.h
-asn_moid.o: ../../include/openssl/evp.h ../../include/openssl/lhash.h
-asn_moid.o: ../../include/openssl/obj_mac.h ../../include/openssl/objects.h
-asn_moid.o: ../../include/openssl/opensslconf.h
-asn_moid.o: ../../include/openssl/opensslv.h ../../include/openssl/ossl_typ.h
-asn_moid.o: ../../include/openssl/pkcs7.h ../../include/openssl/safestack.h
-asn_moid.o: ../../include/openssl/sha.h ../../include/openssl/stack.h
-asn_moid.o: ../../include/openssl/symhacks.h ../../include/openssl/x509.h
-asn_moid.o: ../../include/openssl/x509_vfy.h ../cryptlib.h asn_moid.c
-asn_pack.o: ../../e_os.h ../../include/openssl/asn1.h
-asn_pack.o: ../../include/openssl/bio.h ../../include/openssl/buffer.h
-asn_pack.o: ../../include/openssl/crypto.h ../../include/openssl/e_os2.h
-asn_pack.o: ../../include/openssl/err.h ../../include/openssl/lhash.h
-asn_pack.o: ../../include/openssl/opensslconf.h
-asn_pack.o: ../../include/openssl/opensslv.h ../../include/openssl/ossl_typ.h
-asn_pack.o: ../../include/openssl/safestack.h ../../include/openssl/stack.h
-asn_pack.o: ../../include/openssl/symhacks.h ../cryptlib.h asn_pack.c
-d2i_pr.o: ../../e_os.h ../../include/openssl/asn1.h ../../include/openssl/bio.h
-d2i_pr.o: ../../include/openssl/bn.h ../../include/openssl/buffer.h
-d2i_pr.o: ../../include/openssl/crypto.h ../../include/openssl/dsa.h
-d2i_pr.o: ../../include/openssl/e_os2.h ../../include/openssl/ec.h
-d2i_pr.o: ../../include/openssl/err.h ../../include/openssl/evp.h
-d2i_pr.o: ../../include/openssl/lhash.h ../../include/openssl/obj_mac.h
-d2i_pr.o: ../../include/openssl/objects.h ../../include/openssl/opensslconf.h
-d2i_pr.o: ../../include/openssl/opensslv.h ../../include/openssl/ossl_typ.h
-d2i_pr.o: ../../include/openssl/rsa.h ../../include/openssl/safestack.h
-d2i_pr.o: ../../include/openssl/stack.h ../../include/openssl/symhacks.h
-d2i_pr.o: ../cryptlib.h d2i_pr.c
-d2i_pu.o: ../../e_os.h ../../include/openssl/asn1.h ../../include/openssl/bio.h
-d2i_pu.o: ../../include/openssl/bn.h ../../include/openssl/buffer.h
-d2i_pu.o: ../../include/openssl/crypto.h ../../include/openssl/dsa.h
-d2i_pu.o: ../../include/openssl/e_os2.h ../../include/openssl/ec.h
-d2i_pu.o: ../../include/openssl/err.h ../../include/openssl/evp.h
-d2i_pu.o: ../../include/openssl/lhash.h ../../include/openssl/obj_mac.h
-d2i_pu.o: ../../include/openssl/objects.h ../../include/openssl/opensslconf.h
-d2i_pu.o: ../../include/openssl/opensslv.h ../../include/openssl/ossl_typ.h
-d2i_pu.o: ../../include/openssl/rsa.h ../../include/openssl/safestack.h
-d2i_pu.o: ../../include/openssl/stack.h ../../include/openssl/symhacks.h
-d2i_pu.o: ../cryptlib.h d2i_pu.c
-evp_asn1.o: ../../e_os.h ../../include/openssl/asn1.h
-evp_asn1.o: ../../include/openssl/asn1_mac.h ../../include/openssl/bio.h
-evp_asn1.o: ../../include/openssl/buffer.h ../../include/openssl/crypto.h
-evp_asn1.o: ../../include/openssl/e_os2.h ../../include/openssl/err.h
-evp_asn1.o: ../../include/openssl/lhash.h ../../include/openssl/opensslconf.h
-evp_asn1.o: ../../include/openssl/opensslv.h ../../include/openssl/ossl_typ.h
-evp_asn1.o: ../../include/openssl/safestack.h ../../include/openssl/stack.h
-evp_asn1.o: ../../include/openssl/symhacks.h ../cryptlib.h evp_asn1.c
-f_enum.o: ../../e_os.h ../../include/openssl/asn1.h ../../include/openssl/bio.h
-f_enum.o: ../../include/openssl/buffer.h ../../include/openssl/crypto.h
-f_enum.o: ../../include/openssl/e_os2.h ../../include/openssl/err.h
-f_enum.o: ../../include/openssl/lhash.h ../../include/openssl/opensslconf.h
-f_enum.o: ../../include/openssl/opensslv.h ../../include/openssl/ossl_typ.h
-f_enum.o: ../../include/openssl/safestack.h ../../include/openssl/stack.h
-f_enum.o: ../../include/openssl/symhacks.h ../cryptlib.h f_enum.c
-f_int.o: ../../e_os.h ../../include/openssl/asn1.h ../../include/openssl/bio.h
-f_int.o: ../../include/openssl/buffer.h ../../include/openssl/crypto.h
-f_int.o: ../../include/openssl/e_os2.h ../../include/openssl/err.h
-f_int.o: ../../include/openssl/lhash.h ../../include/openssl/opensslconf.h
-f_int.o: ../../include/openssl/opensslv.h ../../include/openssl/ossl_typ.h
-f_int.o: ../../include/openssl/safestack.h ../../include/openssl/stack.h
-f_int.o: ../../include/openssl/symhacks.h ../cryptlib.h f_int.c
-f_string.o: ../../e_os.h ../../include/openssl/asn1.h
-f_string.o: ../../include/openssl/bio.h ../../include/openssl/buffer.h
-f_string.o: ../../include/openssl/crypto.h ../../include/openssl/e_os2.h
-f_string.o: ../../include/openssl/err.h ../../include/openssl/lhash.h
-f_string.o: ../../include/openssl/opensslconf.h
-f_string.o: ../../include/openssl/opensslv.h ../../include/openssl/ossl_typ.h
-f_string.o: ../../include/openssl/safestack.h ../../include/openssl/stack.h
-f_string.o: ../../include/openssl/symhacks.h ../cryptlib.h f_string.c
-i2d_pr.o: ../../e_os.h ../../include/openssl/asn1.h ../../include/openssl/bio.h
-i2d_pr.o: ../../include/openssl/bn.h ../../include/openssl/buffer.h
-i2d_pr.o: ../../include/openssl/crypto.h ../../include/openssl/dsa.h
-i2d_pr.o: ../../include/openssl/e_os2.h ../../include/openssl/ec.h
-i2d_pr.o: ../../include/openssl/err.h ../../include/openssl/evp.h
-i2d_pr.o: ../../include/openssl/lhash.h ../../include/openssl/obj_mac.h
-i2d_pr.o: ../../include/openssl/objects.h ../../include/openssl/opensslconf.h
-i2d_pr.o: ../../include/openssl/opensslv.h ../../include/openssl/ossl_typ.h
-i2d_pr.o: ../../include/openssl/rsa.h ../../include/openssl/safestack.h
-i2d_pr.o: ../../include/openssl/stack.h ../../include/openssl/symhacks.h
-i2d_pr.o: ../cryptlib.h i2d_pr.c
-i2d_pu.o: ../../e_os.h ../../include/openssl/asn1.h ../../include/openssl/bio.h
-i2d_pu.o: ../../include/openssl/bn.h ../../include/openssl/buffer.h
-i2d_pu.o: ../../include/openssl/crypto.h ../../include/openssl/dsa.h
-i2d_pu.o: ../../include/openssl/e_os2.h ../../include/openssl/ec.h
-i2d_pu.o: ../../include/openssl/err.h ../../include/openssl/evp.h
-i2d_pu.o: ../../include/openssl/lhash.h ../../include/openssl/obj_mac.h
-i2d_pu.o: ../../include/openssl/objects.h ../../include/openssl/opensslconf.h
-i2d_pu.o: ../../include/openssl/opensslv.h ../../include/openssl/ossl_typ.h
-i2d_pu.o: ../../include/openssl/rsa.h ../../include/openssl/safestack.h
-i2d_pu.o: ../../include/openssl/stack.h ../../include/openssl/symhacks.h
-i2d_pu.o: ../cryptlib.h i2d_pu.c
-n_pkey.o: ../../e_os.h ../../include/openssl/asn1.h
-n_pkey.o: ../../include/openssl/asn1_mac.h ../../include/openssl/asn1t.h
-n_pkey.o: ../../include/openssl/bio.h ../../include/openssl/buffer.h
-n_pkey.o: ../../include/openssl/crypto.h ../../include/openssl/e_os2.h
-n_pkey.o: ../../include/openssl/ec.h ../../include/openssl/ecdh.h
-n_pkey.o: ../../include/openssl/ecdsa.h ../../include/openssl/err.h
-n_pkey.o: ../../include/openssl/evp.h ../../include/openssl/lhash.h
-n_pkey.o: ../../include/openssl/obj_mac.h ../../include/openssl/objects.h
-n_pkey.o: ../../include/openssl/opensslconf.h ../../include/openssl/opensslv.h
-n_pkey.o: ../../include/openssl/ossl_typ.h ../../include/openssl/pkcs7.h
-n_pkey.o: ../../include/openssl/rsa.h ../../include/openssl/safestack.h
-n_pkey.o: ../../include/openssl/sha.h ../../include/openssl/stack.h
-n_pkey.o: ../../include/openssl/symhacks.h ../../include/openssl/x509.h
-n_pkey.o: ../../include/openssl/x509_vfy.h ../cryptlib.h n_pkey.c
-nsseq.o: ../../include/openssl/asn1.h ../../include/openssl/asn1t.h
-nsseq.o: ../../include/openssl/bio.h ../../include/openssl/buffer.h
-nsseq.o: ../../include/openssl/crypto.h ../../include/openssl/e_os2.h
-nsseq.o: ../../include/openssl/ec.h ../../include/openssl/ecdh.h
-nsseq.o: ../../include/openssl/ecdsa.h ../../include/openssl/evp.h
-nsseq.o: ../../include/openssl/lhash.h ../../include/openssl/obj_mac.h
-nsseq.o: ../../include/openssl/objects.h ../../include/openssl/opensslconf.h
-nsseq.o: ../../include/openssl/opensslv.h ../../include/openssl/ossl_typ.h
-nsseq.o: ../../include/openssl/pkcs7.h ../../include/openssl/safestack.h
-nsseq.o: ../../include/openssl/sha.h ../../include/openssl/stack.h
-nsseq.o: ../../include/openssl/symhacks.h ../../include/openssl/x509.h
-nsseq.o: ../../include/openssl/x509_vfy.h nsseq.c
-p5_pbe.o: ../../e_os.h ../../include/openssl/asn1.h
-p5_pbe.o: ../../include/openssl/asn1t.h ../../include/openssl/bio.h
-p5_pbe.o: ../../include/openssl/buffer.h ../../include/openssl/crypto.h
-p5_pbe.o: ../../include/openssl/e_os2.h ../../include/openssl/ec.h
-p5_pbe.o: ../../include/openssl/ecdh.h ../../include/openssl/ecdsa.h
-p5_pbe.o: ../../include/openssl/err.h ../../include/openssl/evp.h
-p5_pbe.o: ../../include/openssl/lhash.h ../../include/openssl/obj_mac.h
-p5_pbe.o: ../../include/openssl/objects.h ../../include/openssl/opensslconf.h
-p5_pbe.o: ../../include/openssl/opensslv.h ../../include/openssl/ossl_typ.h
-p5_pbe.o: ../../include/openssl/pkcs7.h ../../include/openssl/rand.h
-p5_pbe.o: ../../include/openssl/safestack.h ../../include/openssl/sha.h
-p5_pbe.o: ../../include/openssl/stack.h ../../include/openssl/symhacks.h
-p5_pbe.o: ../../include/openssl/x509.h ../../include/openssl/x509_vfy.h
-p5_pbe.o: ../cryptlib.h p5_pbe.c
-p5_pbev2.o: ../../e_os.h ../../include/openssl/asn1.h
-p5_pbev2.o: ../../include/openssl/asn1t.h ../../include/openssl/bio.h
-p5_pbev2.o: ../../include/openssl/buffer.h ../../include/openssl/crypto.h
-p5_pbev2.o: ../../include/openssl/e_os2.h ../../include/openssl/ec.h
-p5_pbev2.o: ../../include/openssl/ecdh.h ../../include/openssl/ecdsa.h
-p5_pbev2.o: ../../include/openssl/err.h ../../include/openssl/evp.h
-p5_pbev2.o: ../../include/openssl/lhash.h ../../include/openssl/obj_mac.h
-p5_pbev2.o: ../../include/openssl/objects.h ../../include/openssl/opensslconf.h
-p5_pbev2.o: ../../include/openssl/opensslv.h ../../include/openssl/ossl_typ.h
-p5_pbev2.o: ../../include/openssl/pkcs7.h ../../include/openssl/rand.h
-p5_pbev2.o: ../../include/openssl/safestack.h ../../include/openssl/sha.h
-p5_pbev2.o: ../../include/openssl/stack.h ../../include/openssl/symhacks.h
-p5_pbev2.o: ../../include/openssl/x509.h ../../include/openssl/x509_vfy.h
-p5_pbev2.o: ../cryptlib.h p5_pbev2.c
-p8_pkey.o: ../../e_os.h ../../include/openssl/asn1.h
-p8_pkey.o: ../../include/openssl/asn1t.h ../../include/openssl/bio.h
-p8_pkey.o: ../../include/openssl/buffer.h ../../include/openssl/crypto.h
-p8_pkey.o: ../../include/openssl/e_os2.h ../../include/openssl/ec.h
-p8_pkey.o: ../../include/openssl/ecdh.h ../../include/openssl/ecdsa.h
-p8_pkey.o: ../../include/openssl/err.h ../../include/openssl/evp.h
-p8_pkey.o: ../../include/openssl/lhash.h ../../include/openssl/obj_mac.h
-p8_pkey.o: ../../include/openssl/objects.h ../../include/openssl/opensslconf.h
-p8_pkey.o: ../../include/openssl/opensslv.h ../../include/openssl/ossl_typ.h
-p8_pkey.o: ../../include/openssl/pkcs7.h ../../include/openssl/safestack.h
-p8_pkey.o: ../../include/openssl/sha.h ../../include/openssl/stack.h
-p8_pkey.o: ../../include/openssl/symhacks.h ../../include/openssl/x509.h
-p8_pkey.o: ../../include/openssl/x509_vfy.h ../cryptlib.h p8_pkey.c
-t_bitst.o: ../../e_os.h ../../include/openssl/asn1.h
-t_bitst.o: ../../include/openssl/bio.h ../../include/openssl/buffer.h
-t_bitst.o: ../../include/openssl/conf.h ../../include/openssl/crypto.h
-t_bitst.o: ../../include/openssl/e_os2.h ../../include/openssl/ec.h
-t_bitst.o: ../../include/openssl/ecdh.h ../../include/openssl/ecdsa.h
-t_bitst.o: ../../include/openssl/err.h ../../include/openssl/evp.h
-t_bitst.o: ../../include/openssl/lhash.h ../../include/openssl/obj_mac.h
-t_bitst.o: ../../include/openssl/objects.h ../../include/openssl/opensslconf.h
-t_bitst.o: ../../include/openssl/opensslv.h ../../include/openssl/ossl_typ.h
-t_bitst.o: ../../include/openssl/pkcs7.h ../../include/openssl/safestack.h
-t_bitst.o: ../../include/openssl/sha.h ../../include/openssl/stack.h
-t_bitst.o: ../../include/openssl/symhacks.h ../../include/openssl/x509.h
-t_bitst.o: ../../include/openssl/x509_vfy.h ../../include/openssl/x509v3.h
-t_bitst.o: ../cryptlib.h t_bitst.c
-t_crl.o: ../../e_os.h ../../include/openssl/asn1.h ../../include/openssl/bio.h
-t_crl.o: ../../include/openssl/bn.h ../../include/openssl/buffer.h
-t_crl.o: ../../include/openssl/conf.h ../../include/openssl/crypto.h
-t_crl.o: ../../include/openssl/e_os2.h ../../include/openssl/ec.h
-t_crl.o: ../../include/openssl/ecdh.h ../../include/openssl/ecdsa.h
-t_crl.o: ../../include/openssl/err.h ../../include/openssl/evp.h
-t_crl.o: ../../include/openssl/lhash.h ../../include/openssl/obj_mac.h
-t_crl.o: ../../include/openssl/objects.h ../../include/openssl/opensslconf.h
-t_crl.o: ../../include/openssl/opensslv.h ../../include/openssl/ossl_typ.h
-t_crl.o: ../../include/openssl/pkcs7.h ../../include/openssl/safestack.h
-t_crl.o: ../../include/openssl/sha.h ../../include/openssl/stack.h
-t_crl.o: ../../include/openssl/symhacks.h ../../include/openssl/x509.h
-t_crl.o: ../../include/openssl/x509_vfy.h ../../include/openssl/x509v3.h
-t_crl.o: ../cryptlib.h t_crl.c
-t_pkey.o: ../../e_os.h ../../include/openssl/asn1.h ../../include/openssl/bio.h
-t_pkey.o: ../../include/openssl/bn.h ../../include/openssl/buffer.h
-t_pkey.o: ../../include/openssl/crypto.h ../../include/openssl/dh.h
-t_pkey.o: ../../include/openssl/dsa.h ../../include/openssl/e_os2.h
-t_pkey.o: ../../include/openssl/ec.h ../../include/openssl/err.h
-t_pkey.o: ../../include/openssl/lhash.h ../../include/openssl/obj_mac.h
-t_pkey.o: ../../include/openssl/objects.h ../../include/openssl/opensslconf.h
-t_pkey.o: ../../include/openssl/opensslv.h ../../include/openssl/ossl_typ.h
-t_pkey.o: ../../include/openssl/rsa.h ../../include/openssl/safestack.h
-t_pkey.o: ../../include/openssl/stack.h ../../include/openssl/symhacks.h
-t_pkey.o: ../cryptlib.h t_pkey.c
-t_req.o: ../../e_os.h ../../include/openssl/asn1.h ../../include/openssl/bio.h
-t_req.o: ../../include/openssl/bn.h ../../include/openssl/buffer.h
-t_req.o: ../../include/openssl/conf.h ../../include/openssl/crypto.h
-t_req.o: ../../include/openssl/dsa.h ../../include/openssl/e_os2.h
-t_req.o: ../../include/openssl/ec.h ../../include/openssl/ecdh.h
-t_req.o: ../../include/openssl/ecdsa.h ../../include/openssl/err.h
-t_req.o: ../../include/openssl/evp.h ../../include/openssl/lhash.h
-t_req.o: ../../include/openssl/obj_mac.h ../../include/openssl/objects.h
-t_req.o: ../../include/openssl/opensslconf.h ../../include/openssl/opensslv.h
-t_req.o: ../../include/openssl/ossl_typ.h ../../include/openssl/pkcs7.h
-t_req.o: ../../include/openssl/rsa.h ../../include/openssl/safestack.h
-t_req.o: ../../include/openssl/sha.h ../../include/openssl/stack.h
-t_req.o: ../../include/openssl/symhacks.h ../../include/openssl/x509.h
-t_req.o: ../../include/openssl/x509_vfy.h ../../include/openssl/x509v3.h
-t_req.o: ../cryptlib.h t_req.c
-t_spki.o: ../../e_os.h ../../include/openssl/asn1.h ../../include/openssl/bio.h
-t_spki.o: ../../include/openssl/bn.h ../../include/openssl/buffer.h
-t_spki.o: ../../include/openssl/crypto.h ../../include/openssl/dsa.h
-t_spki.o: ../../include/openssl/e_os2.h ../../include/openssl/ec.h
-t_spki.o: ../../include/openssl/ecdh.h ../../include/openssl/ecdsa.h
-t_spki.o: ../../include/openssl/err.h ../../include/openssl/evp.h
-t_spki.o: ../../include/openssl/lhash.h ../../include/openssl/obj_mac.h
-t_spki.o: ../../include/openssl/objects.h ../../include/openssl/opensslconf.h
-t_spki.o: ../../include/openssl/opensslv.h ../../include/openssl/ossl_typ.h
-t_spki.o: ../../include/openssl/pkcs7.h ../../include/openssl/rsa.h
-t_spki.o: ../../include/openssl/safestack.h ../../include/openssl/sha.h
-t_spki.o: ../../include/openssl/stack.h ../../include/openssl/symhacks.h
-t_spki.o: ../../include/openssl/x509.h ../../include/openssl/x509_vfy.h
-t_spki.o: ../cryptlib.h t_spki.c
-t_x509.o: ../../e_os.h ../../include/openssl/asn1.h ../../include/openssl/bio.h
-t_x509.o: ../../include/openssl/bn.h ../../include/openssl/buffer.h
-t_x509.o: ../../include/openssl/conf.h ../../include/openssl/crypto.h
-t_x509.o: ../../include/openssl/dsa.h ../../include/openssl/e_os2.h
-t_x509.o: ../../include/openssl/ec.h ../../include/openssl/ecdh.h
-t_x509.o: ../../include/openssl/ecdsa.h ../../include/openssl/err.h
-t_x509.o: ../../include/openssl/evp.h ../../include/openssl/lhash.h
-t_x509.o: ../../include/openssl/obj_mac.h ../../include/openssl/objects.h
-t_x509.o: ../../include/openssl/opensslconf.h ../../include/openssl/opensslv.h
-t_x509.o: ../../include/openssl/ossl_typ.h ../../include/openssl/pkcs7.h
-t_x509.o: ../../include/openssl/rsa.h ../../include/openssl/safestack.h
-t_x509.o: ../../include/openssl/sha.h ../../include/openssl/stack.h
-t_x509.o: ../../include/openssl/symhacks.h ../../include/openssl/x509.h
-t_x509.o: ../../include/openssl/x509_vfy.h ../../include/openssl/x509v3.h
-t_x509.o: ../cryptlib.h t_x509.c
-t_x509a.o: ../../e_os.h ../../include/openssl/asn1.h
-t_x509a.o: ../../include/openssl/bio.h ../../include/openssl/buffer.h
-t_x509a.o: ../../include/openssl/crypto.h ../../include/openssl/e_os2.h
-t_x509a.o: ../../include/openssl/ec.h ../../include/openssl/ecdh.h
-t_x509a.o: ../../include/openssl/ecdsa.h ../../include/openssl/err.h
-t_x509a.o: ../../include/openssl/evp.h ../../include/openssl/lhash.h
-t_x509a.o: ../../include/openssl/obj_mac.h ../../include/openssl/objects.h
-t_x509a.o: ../../include/openssl/opensslconf.h ../../include/openssl/opensslv.h
-t_x509a.o: ../../include/openssl/ossl_typ.h ../../include/openssl/pkcs7.h
-t_x509a.o: ../../include/openssl/safestack.h ../../include/openssl/sha.h
-t_x509a.o: ../../include/openssl/stack.h ../../include/openssl/symhacks.h
-t_x509a.o: ../../include/openssl/x509.h ../../include/openssl/x509_vfy.h
-t_x509a.o: ../cryptlib.h t_x509a.c
-tasn_dec.o: ../../include/openssl/asn1.h ../../include/openssl/asn1t.h
-tasn_dec.o: ../../include/openssl/bio.h ../../include/openssl/buffer.h
-tasn_dec.o: ../../include/openssl/crypto.h ../../include/openssl/e_os2.h
-tasn_dec.o: ../../include/openssl/err.h ../../include/openssl/lhash.h
-tasn_dec.o: ../../include/openssl/obj_mac.h ../../include/openssl/objects.h
-tasn_dec.o: ../../include/openssl/opensslconf.h
-tasn_dec.o: ../../include/openssl/opensslv.h ../../include/openssl/ossl_typ.h
-tasn_dec.o: ../../include/openssl/safestack.h ../../include/openssl/stack.h
-tasn_dec.o: ../../include/openssl/symhacks.h tasn_dec.c
-tasn_enc.o: ../../e_os.h ../../include/openssl/asn1.h
-tasn_enc.o: ../../include/openssl/asn1t.h ../../include/openssl/bio.h
-tasn_enc.o: ../../include/openssl/buffer.h ../../include/openssl/crypto.h
-tasn_enc.o: ../../include/openssl/e_os2.h ../../include/openssl/err.h
-tasn_enc.o: ../../include/openssl/lhash.h ../../include/openssl/obj_mac.h
-tasn_enc.o: ../../include/openssl/objects.h ../../include/openssl/opensslconf.h
-tasn_enc.o: ../../include/openssl/opensslv.h ../../include/openssl/ossl_typ.h
-tasn_enc.o: ../../include/openssl/safestack.h ../../include/openssl/stack.h
-tasn_enc.o: ../../include/openssl/symhacks.h ../cryptlib.h tasn_enc.c
-tasn_fre.o: ../../include/openssl/asn1.h ../../include/openssl/asn1t.h
-tasn_fre.o: ../../include/openssl/bio.h ../../include/openssl/crypto.h
-tasn_fre.o: ../../include/openssl/e_os2.h ../../include/openssl/obj_mac.h
-tasn_fre.o: ../../include/openssl/objects.h ../../include/openssl/opensslconf.h
-tasn_fre.o: ../../include/openssl/opensslv.h ../../include/openssl/ossl_typ.h
-tasn_fre.o: ../../include/openssl/safestack.h ../../include/openssl/stack.h
-tasn_fre.o: ../../include/openssl/symhacks.h tasn_fre.c
-tasn_new.o: ../../include/openssl/asn1.h ../../include/openssl/asn1t.h
-tasn_new.o: ../../include/openssl/bio.h ../../include/openssl/crypto.h
-tasn_new.o: ../../include/openssl/e_os2.h ../../include/openssl/err.h
-tasn_new.o: ../../include/openssl/lhash.h ../../include/openssl/obj_mac.h
-tasn_new.o: ../../include/openssl/objects.h ../../include/openssl/opensslconf.h
-tasn_new.o: ../../include/openssl/opensslv.h ../../include/openssl/ossl_typ.h
-tasn_new.o: ../../include/openssl/safestack.h ../../include/openssl/stack.h
-tasn_new.o: ../../include/openssl/symhacks.h tasn_new.c
-tasn_typ.o: ../../include/openssl/asn1.h ../../include/openssl/asn1t.h
-tasn_typ.o: ../../include/openssl/bio.h ../../include/openssl/crypto.h
-tasn_typ.o: ../../include/openssl/e_os2.h ../../include/openssl/opensslconf.h
-tasn_typ.o: ../../include/openssl/opensslv.h ../../include/openssl/ossl_typ.h
-tasn_typ.o: ../../include/openssl/safestack.h ../../include/openssl/stack.h
-tasn_typ.o: ../../include/openssl/symhacks.h tasn_typ.c
-tasn_utl.o: ../../include/openssl/asn1.h ../../include/openssl/asn1t.h
-tasn_utl.o: ../../include/openssl/bio.h ../../include/openssl/crypto.h
-tasn_utl.o: ../../include/openssl/e_os2.h ../../include/openssl/err.h
-tasn_utl.o: ../../include/openssl/lhash.h ../../include/openssl/obj_mac.h
-tasn_utl.o: ../../include/openssl/objects.h ../../include/openssl/opensslconf.h
-tasn_utl.o: ../../include/openssl/opensslv.h ../../include/openssl/ossl_typ.h
-tasn_utl.o: ../../include/openssl/safestack.h ../../include/openssl/stack.h
-tasn_utl.o: ../../include/openssl/symhacks.h tasn_utl.c
-x_algor.o: ../../include/openssl/asn1.h ../../include/openssl/asn1t.h
-x_algor.o: ../../include/openssl/bio.h ../../include/openssl/buffer.h
-x_algor.o: ../../include/openssl/crypto.h ../../include/openssl/e_os2.h
-x_algor.o: ../../include/openssl/ec.h ../../include/openssl/ecdh.h
-x_algor.o: ../../include/openssl/ecdsa.h ../../include/openssl/evp.h
-x_algor.o: ../../include/openssl/lhash.h ../../include/openssl/obj_mac.h
-x_algor.o: ../../include/openssl/objects.h ../../include/openssl/opensslconf.h
-x_algor.o: ../../include/openssl/opensslv.h ../../include/openssl/ossl_typ.h
-x_algor.o: ../../include/openssl/pkcs7.h ../../include/openssl/safestack.h
-x_algor.o: ../../include/openssl/sha.h ../../include/openssl/stack.h
-x_algor.o: ../../include/openssl/symhacks.h ../../include/openssl/x509.h
-x_algor.o: ../../include/openssl/x509_vfy.h x_algor.c
-x_attrib.o: ../../e_os.h ../../include/openssl/asn1.h
-x_attrib.o: ../../include/openssl/asn1t.h ../../include/openssl/bio.h
-x_attrib.o: ../../include/openssl/buffer.h ../../include/openssl/crypto.h
-x_attrib.o: ../../include/openssl/e_os2.h ../../include/openssl/ec.h
-x_attrib.o: ../../include/openssl/ecdh.h ../../include/openssl/ecdsa.h
-x_attrib.o: ../../include/openssl/err.h ../../include/openssl/evp.h
-x_attrib.o: ../../include/openssl/lhash.h ../../include/openssl/obj_mac.h
-x_attrib.o: ../../include/openssl/objects.h ../../include/openssl/opensslconf.h
-x_attrib.o: ../../include/openssl/opensslv.h ../../include/openssl/ossl_typ.h
-x_attrib.o: ../../include/openssl/pkcs7.h ../../include/openssl/safestack.h
-x_attrib.o: ../../include/openssl/sha.h ../../include/openssl/stack.h
-x_attrib.o: ../../include/openssl/symhacks.h ../../include/openssl/x509.h
-x_attrib.o: ../../include/openssl/x509_vfy.h ../cryptlib.h x_attrib.c
-x_bignum.o: ../../e_os.h ../../include/openssl/asn1.h
-x_bignum.o: ../../include/openssl/asn1t.h ../../include/openssl/bio.h
-x_bignum.o: ../../include/openssl/bn.h ../../include/openssl/buffer.h
-x_bignum.o: ../../include/openssl/crypto.h ../../include/openssl/e_os2.h
-x_bignum.o: ../../include/openssl/err.h ../../include/openssl/lhash.h
-x_bignum.o: ../../include/openssl/opensslconf.h
-x_bignum.o: ../../include/openssl/opensslv.h ../../include/openssl/ossl_typ.h
-x_bignum.o: ../../include/openssl/safestack.h ../../include/openssl/stack.h
-x_bignum.o: ../../include/openssl/symhacks.h ../cryptlib.h x_bignum.c
-x_crl.o: ../../e_os.h ../../include/openssl/asn1.h
-x_crl.o: ../../include/openssl/asn1t.h ../../include/openssl/bio.h
-x_crl.o: ../../include/openssl/buffer.h ../../include/openssl/crypto.h
-x_crl.o: ../../include/openssl/e_os2.h ../../include/openssl/ec.h
-x_crl.o: ../../include/openssl/ecdh.h ../../include/openssl/ecdsa.h
-x_crl.o: ../../include/openssl/err.h ../../include/openssl/evp.h
-x_crl.o: ../../include/openssl/lhash.h ../../include/openssl/obj_mac.h
-x_crl.o: ../../include/openssl/objects.h ../../include/openssl/opensslconf.h
-x_crl.o: ../../include/openssl/opensslv.h ../../include/openssl/ossl_typ.h
-x_crl.o: ../../include/openssl/pkcs7.h ../../include/openssl/safestack.h
-x_crl.o: ../../include/openssl/sha.h ../../include/openssl/stack.h
-x_crl.o: ../../include/openssl/symhacks.h ../../include/openssl/x509.h
-x_crl.o: ../../include/openssl/x509_vfy.h ../cryptlib.h x_crl.c
-x_exten.o: ../../include/openssl/asn1.h ../../include/openssl/asn1t.h
-x_exten.o: ../../include/openssl/bio.h ../../include/openssl/buffer.h
-x_exten.o: ../../include/openssl/crypto.h ../../include/openssl/e_os2.h
-x_exten.o: ../../include/openssl/ec.h ../../include/openssl/ecdh.h
-x_exten.o: ../../include/openssl/ecdsa.h ../../include/openssl/evp.h
-x_exten.o: ../../include/openssl/lhash.h ../../include/openssl/obj_mac.h
-x_exten.o: ../../include/openssl/objects.h ../../include/openssl/opensslconf.h
-x_exten.o: ../../include/openssl/opensslv.h ../../include/openssl/ossl_typ.h
-x_exten.o: ../../include/openssl/pkcs7.h ../../include/openssl/safestack.h
-x_exten.o: ../../include/openssl/sha.h ../../include/openssl/stack.h
-x_exten.o: ../../include/openssl/symhacks.h ../../include/openssl/x509.h
-x_exten.o: ../../include/openssl/x509_vfy.h x_exten.c
-x_info.o: ../../e_os.h ../../include/openssl/asn1.h ../../include/openssl/bio.h
-x_info.o: ../../include/openssl/buffer.h ../../include/openssl/crypto.h
-x_info.o: ../../include/openssl/e_os2.h ../../include/openssl/ec.h
-x_info.o: ../../include/openssl/ecdh.h ../../include/openssl/ecdsa.h
-x_info.o: ../../include/openssl/err.h ../../include/openssl/evp.h
-x_info.o: ../../include/openssl/lhash.h ../../include/openssl/obj_mac.h
-x_info.o: ../../include/openssl/objects.h ../../include/openssl/opensslconf.h
-x_info.o: ../../include/openssl/opensslv.h ../../include/openssl/ossl_typ.h
-x_info.o: ../../include/openssl/pkcs7.h ../../include/openssl/safestack.h
-x_info.o: ../../include/openssl/sha.h ../../include/openssl/stack.h
-x_info.o: ../../include/openssl/symhacks.h ../../include/openssl/x509.h
-x_info.o: ../../include/openssl/x509_vfy.h ../cryptlib.h x_info.c
-x_long.o: ../../e_os.h ../../include/openssl/asn1.h
-x_long.o: ../../include/openssl/asn1t.h ../../include/openssl/bio.h
-x_long.o: ../../include/openssl/bn.h ../../include/openssl/buffer.h
-x_long.o: ../../include/openssl/crypto.h ../../include/openssl/e_os2.h
-x_long.o: ../../include/openssl/err.h ../../include/openssl/lhash.h
-x_long.o: ../../include/openssl/opensslconf.h ../../include/openssl/opensslv.h
-x_long.o: ../../include/openssl/ossl_typ.h ../../include/openssl/safestack.h
-x_long.o: ../../include/openssl/stack.h ../../include/openssl/symhacks.h
-x_long.o: ../cryptlib.h x_long.c
-x_name.o: ../../e_os.h ../../include/openssl/asn1.h
-x_name.o: ../../include/openssl/asn1t.h ../../include/openssl/bio.h
-x_name.o: ../../include/openssl/buffer.h ../../include/openssl/crypto.h
-x_name.o: ../../include/openssl/e_os2.h ../../include/openssl/ec.h
-x_name.o: ../../include/openssl/ecdh.h ../../include/openssl/ecdsa.h
-x_name.o: ../../include/openssl/err.h ../../include/openssl/evp.h
-x_name.o: ../../include/openssl/lhash.h ../../include/openssl/obj_mac.h
-x_name.o: ../../include/openssl/objects.h ../../include/openssl/opensslconf.h
-x_name.o: ../../include/openssl/opensslv.h ../../include/openssl/ossl_typ.h
-x_name.o: ../../include/openssl/pkcs7.h ../../include/openssl/safestack.h
-x_name.o: ../../include/openssl/sha.h ../../include/openssl/stack.h
-x_name.o: ../../include/openssl/symhacks.h ../../include/openssl/x509.h
-x_name.o: ../../include/openssl/x509_vfy.h ../cryptlib.h x_name.c
-x_pkey.o: ../../e_os.h ../../include/openssl/asn1.h
-x_pkey.o: ../../include/openssl/asn1_mac.h ../../include/openssl/bio.h
-x_pkey.o: ../../include/openssl/buffer.h ../../include/openssl/crypto.h
-x_pkey.o: ../../include/openssl/e_os2.h ../../include/openssl/ec.h
-x_pkey.o: ../../include/openssl/ecdh.h ../../include/openssl/ecdsa.h
-x_pkey.o: ../../include/openssl/err.h ../../include/openssl/evp.h
-x_pkey.o: ../../include/openssl/lhash.h ../../include/openssl/obj_mac.h
-x_pkey.o: ../../include/openssl/objects.h ../../include/openssl/opensslconf.h
-x_pkey.o: ../../include/openssl/opensslv.h ../../include/openssl/ossl_typ.h
-x_pkey.o: ../../include/openssl/pkcs7.h ../../include/openssl/safestack.h
-x_pkey.o: ../../include/openssl/sha.h ../../include/openssl/stack.h
-x_pkey.o: ../../include/openssl/symhacks.h ../../include/openssl/x509.h
-x_pkey.o: ../../include/openssl/x509_vfy.h ../cryptlib.h x_pkey.c
-x_pubkey.o: ../../e_os.h ../../include/openssl/asn1.h
-x_pubkey.o: ../../include/openssl/asn1t.h ../../include/openssl/bio.h
-x_pubkey.o: ../../include/openssl/buffer.h ../../include/openssl/crypto.h
-x_pubkey.o: ../../include/openssl/dsa.h ../../include/openssl/e_os2.h
-x_pubkey.o: ../../include/openssl/ec.h ../../include/openssl/ecdh.h
-x_pubkey.o: ../../include/openssl/ecdsa.h ../../include/openssl/err.h
-x_pubkey.o: ../../include/openssl/evp.h ../../include/openssl/lhash.h
-x_pubkey.o: ../../include/openssl/obj_mac.h ../../include/openssl/objects.h
-x_pubkey.o: ../../include/openssl/opensslconf.h
-x_pubkey.o: ../../include/openssl/opensslv.h ../../include/openssl/ossl_typ.h
-x_pubkey.o: ../../include/openssl/pkcs7.h ../../include/openssl/rsa.h
-x_pubkey.o: ../../include/openssl/safestack.h ../../include/openssl/sha.h
-x_pubkey.o: ../../include/openssl/stack.h ../../include/openssl/symhacks.h
-x_pubkey.o: ../../include/openssl/x509.h ../../include/openssl/x509_vfy.h
-x_pubkey.o: ../cryptlib.h x_pubkey.c
-x_req.o: ../../e_os.h ../../include/openssl/asn1.h
-x_req.o: ../../include/openssl/asn1t.h ../../include/openssl/bio.h
-x_req.o: ../../include/openssl/buffer.h ../../include/openssl/crypto.h
-x_req.o: ../../include/openssl/e_os2.h ../../include/openssl/ec.h
-x_req.o: ../../include/openssl/ecdh.h ../../include/openssl/ecdsa.h
-x_req.o: ../../include/openssl/err.h ../../include/openssl/evp.h
-x_req.o: ../../include/openssl/lhash.h ../../include/openssl/obj_mac.h
-x_req.o: ../../include/openssl/objects.h ../../include/openssl/opensslconf.h
-x_req.o: ../../include/openssl/opensslv.h ../../include/openssl/ossl_typ.h
-x_req.o: ../../include/openssl/pkcs7.h ../../include/openssl/safestack.h
-x_req.o: ../../include/openssl/sha.h ../../include/openssl/stack.h
-x_req.o: ../../include/openssl/symhacks.h ../../include/openssl/x509.h
-x_req.o: ../../include/openssl/x509_vfy.h ../cryptlib.h x_req.c
-x_sig.o: ../../e_os.h ../../include/openssl/asn1.h
-x_sig.o: ../../include/openssl/asn1t.h ../../include/openssl/bio.h
-x_sig.o: ../../include/openssl/buffer.h ../../include/openssl/crypto.h
-x_sig.o: ../../include/openssl/e_os2.h ../../include/openssl/ec.h
-x_sig.o: ../../include/openssl/ecdh.h ../../include/openssl/ecdsa.h
-x_sig.o: ../../include/openssl/err.h ../../include/openssl/evp.h
-x_sig.o: ../../include/openssl/lhash.h ../../include/openssl/obj_mac.h
-x_sig.o: ../../include/openssl/objects.h ../../include/openssl/opensslconf.h
-x_sig.o: ../../include/openssl/opensslv.h ../../include/openssl/ossl_typ.h
-x_sig.o: ../../include/openssl/pkcs7.h ../../include/openssl/safestack.h
-x_sig.o: ../../include/openssl/sha.h ../../include/openssl/stack.h
-x_sig.o: ../../include/openssl/symhacks.h ../../include/openssl/x509.h
-x_sig.o: ../../include/openssl/x509_vfy.h ../cryptlib.h x_sig.c
-x_spki.o: ../../e_os.h ../../include/openssl/asn1.h
-x_spki.o: ../../include/openssl/asn1t.h ../../include/openssl/bio.h
-x_spki.o: ../../include/openssl/buffer.h ../../include/openssl/crypto.h
-x_spki.o: ../../include/openssl/e_os2.h ../../include/openssl/ec.h
-x_spki.o: ../../include/openssl/ecdh.h ../../include/openssl/ecdsa.h
-x_spki.o: ../../include/openssl/err.h ../../include/openssl/evp.h
-x_spki.o: ../../include/openssl/lhash.h ../../include/openssl/obj_mac.h
-x_spki.o: ../../include/openssl/objects.h ../../include/openssl/opensslconf.h
-x_spki.o: ../../include/openssl/opensslv.h ../../include/openssl/ossl_typ.h
-x_spki.o: ../../include/openssl/pkcs7.h ../../include/openssl/safestack.h
-x_spki.o: ../../include/openssl/sha.h ../../include/openssl/stack.h
-x_spki.o: ../../include/openssl/symhacks.h ../../include/openssl/x509.h
-x_spki.o: ../../include/openssl/x509_vfy.h ../cryptlib.h x_spki.c
-x_val.o: ../../e_os.h ../../include/openssl/asn1.h
-x_val.o: ../../include/openssl/asn1t.h ../../include/openssl/bio.h
-x_val.o: ../../include/openssl/buffer.h ../../include/openssl/crypto.h
-x_val.o: ../../include/openssl/e_os2.h ../../include/openssl/ec.h
-x_val.o: ../../include/openssl/ecdh.h ../../include/openssl/ecdsa.h
-x_val.o: ../../include/openssl/err.h ../../include/openssl/evp.h
-x_val.o: ../../include/openssl/lhash.h ../../include/openssl/obj_mac.h
-x_val.o: ../../include/openssl/objects.h ../../include/openssl/opensslconf.h
-x_val.o: ../../include/openssl/opensslv.h ../../include/openssl/ossl_typ.h
-x_val.o: ../../include/openssl/pkcs7.h ../../include/openssl/safestack.h
-x_val.o: ../../include/openssl/sha.h ../../include/openssl/stack.h
-x_val.o: ../../include/openssl/symhacks.h ../../include/openssl/x509.h
-x_val.o: ../../include/openssl/x509_vfy.h ../cryptlib.h x_val.c
-x_x509.o: ../../e_os.h ../../include/openssl/asn1.h
-x_x509.o: ../../include/openssl/asn1t.h ../../include/openssl/bio.h
-x_x509.o: ../../include/openssl/buffer.h ../../include/openssl/conf.h
-x_x509.o: ../../include/openssl/crypto.h ../../include/openssl/e_os2.h
-x_x509.o: ../../include/openssl/ec.h ../../include/openssl/ecdh.h
-x_x509.o: ../../include/openssl/ecdsa.h ../../include/openssl/err.h
-x_x509.o: ../../include/openssl/evp.h ../../include/openssl/lhash.h
-x_x509.o: ../../include/openssl/obj_mac.h ../../include/openssl/objects.h
-x_x509.o: ../../include/openssl/opensslconf.h ../../include/openssl/opensslv.h
-x_x509.o: ../../include/openssl/ossl_typ.h ../../include/openssl/pkcs7.h
-x_x509.o: ../../include/openssl/safestack.h ../../include/openssl/sha.h
-x_x509.o: ../../include/openssl/stack.h ../../include/openssl/symhacks.h
-x_x509.o: ../../include/openssl/x509.h ../../include/openssl/x509_vfy.h
-x_x509.o: ../../include/openssl/x509v3.h ../cryptlib.h x_x509.c
-x_x509a.o: ../../e_os.h ../../include/openssl/asn1.h
-x_x509a.o: ../../include/openssl/asn1t.h ../../include/openssl/bio.h
-x_x509a.o: ../../include/openssl/buffer.h ../../include/openssl/crypto.h
-x_x509a.o: ../../include/openssl/e_os2.h ../../include/openssl/ec.h
-x_x509a.o: ../../include/openssl/ecdh.h ../../include/openssl/ecdsa.h
-x_x509a.o: ../../include/openssl/err.h ../../include/openssl/evp.h
-x_x509a.o: ../../include/openssl/lhash.h ../../include/openssl/obj_mac.h
-x_x509a.o: ../../include/openssl/objects.h ../../include/openssl/opensslconf.h
-x_x509a.o: ../../include/openssl/opensslv.h ../../include/openssl/ossl_typ.h
-x_x509a.o: ../../include/openssl/pkcs7.h ../../include/openssl/safestack.h
-x_x509a.o: ../../include/openssl/sha.h ../../include/openssl/stack.h
-x_x509a.o: ../../include/openssl/symhacks.h ../../include/openssl/x509.h
-x_x509a.o: ../../include/openssl/x509_vfy.h ../cryptlib.h x_x509a.c
diff --git a/crypto/openssl/crypto/asn1/a_bitstr.c b/crypto/openssl/crypto/asn1/a_bitstr.c
deleted file mode 100644
index 0fb9ce0c2aea..000000000000
--- a/crypto/openssl/crypto/asn1/a_bitstr.c
+++ /dev/null
@@ -1,225 +0,0 @@
-/* crypto/asn1/a_bitstr.c */
-/* Copyright (C) 1995-1998 Eric Young (eay@cryptsoft.com)
- * All rights reserved.
- *
- * This package is an SSL implementation written
- * by Eric Young (eay@cryptsoft.com).
- * The implementation was written so as to conform with Netscapes SSL.
- * 
- * This library is free for commercial and non-commercial use as long as
- * the following conditions are aheared to.  The following conditions
- * apply to all code found in this distribution, be it the RC4, RSA,
- * lhash, DES, etc., code; not just the SSL code.  The SSL documentation
- * included with this distribution is covered by the same copyright terms
- * except that the holder is Tim Hudson (tjh@cryptsoft.com).
- * 
- * Copyright remains Eric Young's, and as such any Copyright notices in
- * the code are not to be removed.
- * If this package is used in a product, Eric Young should be given attribution
- * as the author of the parts of the library used.
- * This can be in the form of a textual message at program startup or
- * in documentation (online or textual) provided with the package.
- * 
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions
- * are met:
- * 1. Redistributions of source code must retain the copyright
- *    notice, this list of conditions and the following disclaimer.
- * 2. Redistributions in binary form must reproduce the above copyright
- *    notice, this list of conditions and the following disclaimer in the
- *    documentation and/or other materials provided with the distribution.
- * 3. All advertising materials mentioning features or use of this software
- *    must display the following acknowledgement:
- *    "This product includes cryptographic software written by
- *     Eric Young (eay@cryptsoft.com)"
- *    The word 'cryptographic' can be left out if the rouines from the library
- *    being used are not cryptographic related :-).
- * 4. If you include any Windows specific code (or a derivative thereof) from 
- *    the apps directory (application code) you must include an acknowledgement:
- *    "This product includes software written by Tim Hudson (tjh@cryptsoft.com)"
- * 
- * THIS SOFTWARE IS PROVIDED BY ERIC YOUNG ``AS IS'' AND
- * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
- * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
- * ARE DISCLAIMED.  IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE
- * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
- * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
- * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
- * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
- * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
- * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
- * SUCH DAMAGE.
- * 
- * The licence and distribution terms for any publically available version or
- * derivative of this code cannot be changed.  i.e. this code cannot simply be
- * copied and put under another distribution licence
- * [including the GNU Public Licence.]
- */
-
-#include <stdio.h>
-#include "cryptlib.h"
-#include <openssl/asn1.h>
-
-int ASN1_BIT_STRING_set(ASN1_BIT_STRING *x, unsigned char *d, int len)
-{ return M_ASN1_BIT_STRING_set(x, d, len); }
-
-int i2c_ASN1_BIT_STRING(ASN1_BIT_STRING *a, unsigned char **pp)
-	{
-	int ret,j,bits,len;
-	unsigned char *p,*d;
-
-	if (a == NULL) return(0);
-
-	len=a->length;
-
-	if (len > 0)
-		{
-		if (a->flags & ASN1_STRING_FLAG_BITS_LEFT)
-			{
-			bits=(int)a->flags&0x07;
-			}
-		else
-			{
-			for ( ; len > 0; len--)
-				{
-				if (a->data[len-1]) break;
-				}
-			j=a->data[len-1];
-			if      (j & 0x01) bits=0;
-			else if (j & 0x02) bits=1;
-			else if (j & 0x04) bits=2;
-			else if (j & 0x08) bits=3;
-			else if (j & 0x10) bits=4;
-			else if (j & 0x20) bits=5;
-			else if (j & 0x40) bits=6;
-			else if (j & 0x80) bits=7;
-			else bits=0; /* should not happen */
-			}
-		}
-	else
-		bits=0;
-
-	ret=1+len;
-	if (pp == NULL) return(ret);
-
-	p= *pp;
-
-	*(p++)=(unsigned char)bits;
-	d=a->data;
-	memcpy(p,d,len);
-	p+=len;
-	if (len > 0) p[-1]&=(0xff<<bits);
-	*pp=p;
-	return(ret);
-	}
-
-ASN1_BIT_STRING *c2i_ASN1_BIT_STRING(ASN1_BIT_STRING **a,
-	const unsigned char **pp, long len)
-	{
-	ASN1_BIT_STRING *ret=NULL;
-	const unsigned char *p;
-	unsigned char *s;
-	int i;
-
-	if (len < 1)
-		{
-		i=ASN1_R_STRING_TOO_SHORT;
-		goto err;
-		}
-
-	if ((a == NULL) || ((*a) == NULL))
-		{
-		if ((ret=M_ASN1_BIT_STRING_new()) == NULL) return(NULL);
-		}
-	else
-		ret=(*a);
-
-	p= *pp;
-	i= *(p++);
-	/* We do this to preserve the settings.  If we modify
-	 * the settings, via the _set_bit function, we will recalculate
-	 * on output */
-	ret->flags&= ~(ASN1_STRING_FLAG_BITS_LEFT|0x07); /* clear */
-	ret->flags|=(ASN1_STRING_FLAG_BITS_LEFT|(i&0x07)); /* set */
-
-	if (len-- > 1) /* using one because of the bits left byte */
-		{
-		s=(unsigned char *)OPENSSL_malloc((int)len);
-		if (s == NULL)
-			{
-			i=ERR_R_MALLOC_FAILURE;
-			goto err;
-			}
-		memcpy(s,p,(int)len);
-		s[len-1]&=(0xff<<i);
-		p+=len;
-		}
-	else
-		s=NULL;
-
-	ret->length=(int)len;
-	if (ret->data != NULL) OPENSSL_free(ret->data);
-	ret->data=s;
-	ret->type=V_ASN1_BIT_STRING;
-	if (a != NULL) (*a)=ret;
-	*pp=p;
-	return(ret);
-err:
-	ASN1err(ASN1_F_C2I_ASN1_BIT_STRING,i);
-	if ((ret != NULL) && ((a == NULL) || (*a != ret)))
-		M_ASN1_BIT_STRING_free(ret);
-	return(NULL);
-	}
-
-/* These next 2 functions from Goetz Babin-Ebell <babinebell@trustcenter.de>
- */
-int ASN1_BIT_STRING_set_bit(ASN1_BIT_STRING *a, int n, int value)
-	{
-	int w,v,iv;
-	unsigned char *c;
-
-	w=n/8;
-	v=1<<(7-(n&0x07));
-	iv= ~v;
-	if (!value) v=0;
-
-	if (a == NULL)
-		return 0;
-
-	a->flags&= ~(ASN1_STRING_FLAG_BITS_LEFT|0x07); /* clear, set on write */
-
-	if ((a->length < (w+1)) || (a->data == NULL))
-		{
-		if (!value) return(1); /* Don't need to set */
-		if (a->data == NULL)
-			c=(unsigned char *)OPENSSL_malloc(w+1);
-		else
-			c=(unsigned char *)OPENSSL_realloc_clean(a->data,
-								 a->length,
-								 w+1);
-		if (c == NULL)
-			{
-			ASN1err(ASN1_F_ASN1_BIT_STRING_SET_BIT,ERR_R_MALLOC_FAILURE);
-			return 0;
-			}
-  		if (w+1-a->length > 0) memset(c+a->length, 0, w+1-a->length);
-		a->data=c;
-		a->length=w+1;
-	}
-	a->data[w]=((a->data[w])&iv)|v;
-	while ((a->length > 0) && (a->data[a->length-1] == 0))
-		a->length--;
-	return(1);
-	}
-
-int ASN1_BIT_STRING_get_bit(ASN1_BIT_STRING *a, int n)
-	{
-	int w,v;
-
-	w=n/8;
-	v=1<<(7-(n&0x07));
-	if ((a == NULL) || (a->length < (w+1)) || (a->data == NULL))
-		return(0);
-	return((a->data[w]&v) != 0);
-	}
-
diff --git a/crypto/openssl/crypto/asn1/a_bool.c b/crypto/openssl/crypto/asn1/a_bool.c
deleted file mode 100644
index 331acdf05350..000000000000
--- a/crypto/openssl/crypto/asn1/a_bool.c
+++ /dev/null
@@ -1,114 +0,0 @@
-/* crypto/asn1/a_bool.c */
-/* Copyright (C) 1995-1998 Eric Young (eay@cryptsoft.com)
- * All rights reserved.
- *
- * This package is an SSL implementation written
- * by Eric Young (eay@cryptsoft.com).
- * The implementation was written so as to conform with Netscapes SSL.
- * 
- * This library is free for commercial and non-commercial use as long as
- * the following conditions are aheared to.  The following conditions
- * apply to all code found in this distribution, be it the RC4, RSA,
- * lhash, DES, etc., code; not just the SSL code.  The SSL documentation
- * included with this distribution is covered by the same copyright terms
- * except that the holder is Tim Hudson (tjh@cryptsoft.com).
- * 
- * Copyright remains Eric Young's, and as such any Copyright notices in
- * the code are not to be removed.
- * If this package is used in a product, Eric Young should be given attribution
- * as the author of the parts of the library used.
- * This can be in the form of a textual message at program startup or
- * in documentation (online or textual) provided with the package.
- * 
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions
- * are met:
- * 1. Redistributions of source code must retain the copyright
- *    notice, this list of conditions and the following disclaimer.
- * 2. Redistributions in binary form must reproduce the above copyright
- *    notice, this list of conditions and the following disclaimer in the
- *    documentation and/or other materials provided with the distribution.
- * 3. All advertising materials mentioning features or use of this software
- *    must display the following acknowledgement:
- *    "This product includes cryptographic software written by
- *     Eric Young (eay@cryptsoft.com)"
- *    The word 'cryptographic' can be left out if the rouines from the library
- *    being used are not cryptographic related :-).
- * 4. If you include any Windows specific code (or a derivative thereof) from 
- *    the apps directory (application code) you must include an acknowledgement:
- *    "This product includes software written by Tim Hudson (tjh@cryptsoft.com)"
- * 
- * THIS SOFTWARE IS PROVIDED BY ERIC YOUNG ``AS IS'' AND
- * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
- * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
- * ARE DISCLAIMED.  IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE
- * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
- * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
- * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
- * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
- * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
- * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
- * SUCH DAMAGE.
- * 
- * The licence and distribution terms for any publically available version or
- * derivative of this code cannot be changed.  i.e. this code cannot simply be
- * copied and put under another distribution licence
- * [including the GNU Public Licence.]
- */
-
-#include <stdio.h>
-#include "cryptlib.h"
-#include <openssl/asn1t.h>
-
-int i2d_ASN1_BOOLEAN(int a, unsigned char **pp)
-	{
-	int r;
-	unsigned char *p;
-
-	r=ASN1_object_size(0,1,V_ASN1_BOOLEAN);
-	if (pp == NULL) return(r);
-	p= *pp;
-
-	ASN1_put_object(&p,0,1,V_ASN1_BOOLEAN,V_ASN1_UNIVERSAL);
-	*(p++)= (unsigned char)a;
-	*pp=p;
-	return(r);
-	}
-
-int d2i_ASN1_BOOLEAN(int *a, const unsigned char **pp, long length)
-	{
-	int ret= -1;
-	const unsigned char *p;
-	long len;
-	int inf,tag,xclass;
-	int i=0;
-
-	p= *pp;
-	inf=ASN1_get_object(&p,&len,&tag,&xclass,length);
-	if (inf & 0x80)
-		{
-		i=ASN1_R_BAD_OBJECT_HEADER;
-		goto err;
-		}
-
-	if (tag != V_ASN1_BOOLEAN)
-		{
-		i=ASN1_R_EXPECTING_A_BOOLEAN;
-		goto err;
-		}
-
-	if (len != 1)
-		{
-		i=ASN1_R_BOOLEAN_IS_WRONG_LENGTH;
-		goto err;
-		}
-	ret= (int)*(p++);
-	if (a != NULL) (*a)=ret;
-	*pp=p;
-	return(ret);
-err:
-	ASN1err(ASN1_F_D2I_ASN1_BOOLEAN,i);
-	return(ret);
-	}
-
-
diff --git a/crypto/openssl/crypto/asn1/a_bytes.c b/crypto/openssl/crypto/asn1/a_bytes.c
deleted file mode 100644
index 8d13f9c93113..000000000000
--- a/crypto/openssl/crypto/asn1/a_bytes.c
+++ /dev/null
@@ -1,314 +0,0 @@
-/* crypto/asn1/a_bytes.c */
-/* Copyright (C) 1995-1998 Eric Young (eay@cryptsoft.com)
- * All rights reserved.
- *
- * This package is an SSL implementation written
- * by Eric Young (eay@cryptsoft.com).
- * The implementation was written so as to conform with Netscapes SSL.
- * 
- * This library is free for commercial and non-commercial use as long as
- * the following conditions are aheared to.  The following conditions
- * apply to all code found in this distribution, be it the RC4, RSA,
- * lhash, DES, etc., code; not just the SSL code.  The SSL documentation
- * included with this distribution is covered by the same copyright terms
- * except that the holder is Tim Hudson (tjh@cryptsoft.com).
- * 
- * Copyright remains Eric Young's, and as such any Copyright notices in
- * the code are not to be removed.
- * If this package is used in a product, Eric Young should be given attribution
- * as the author of the parts of the library used.
- * This can be in the form of a textual message at program startup or
- * in documentation (online or textual) provided with the package.
- * 
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions
- * are met:
- * 1. Redistributions of source code must retain the copyright
- *    notice, this list of conditions and the following disclaimer.
- * 2. Redistributions in binary form must reproduce the above copyright
- *    notice, this list of conditions and the following disclaimer in the
- *    documentation and/or other materials provided with the distribution.
- * 3. All advertising materials mentioning features or use of this software
- *    must display the following acknowledgement:
- *    "This product includes cryptographic software written by
- *     Eric Young (eay@cryptsoft.com)"
- *    The word 'cryptographic' can be left out if the rouines from the library
- *    being used are not cryptographic related :-).
- * 4. If you include any Windows specific code (or a derivative thereof) from 
- *    the apps directory (application code) you must include an acknowledgement:
- *    "This product includes software written by Tim Hudson (tjh@cryptsoft.com)"
- * 
- * THIS SOFTWARE IS PROVIDED BY ERIC YOUNG ``AS IS'' AND
- * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
- * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
- * ARE DISCLAIMED.  IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE
- * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
- * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
- * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
- * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
- * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
- * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
- * SUCH DAMAGE.
- * 
- * The licence and distribution terms for any publically available version or
- * derivative of this code cannot be changed.  i.e. this code cannot simply be
- * copied and put under another distribution licence
- * [including the GNU Public Licence.]
- */
-
-#include <stdio.h>
-#include "cryptlib.h"
-#include <openssl/asn1.h>
-
-static int asn1_collate_primitive(ASN1_STRING *a, ASN1_const_CTX *c);
-/* type is a 'bitmap' of acceptable string types.
- */
-ASN1_STRING *d2i_ASN1_type_bytes(ASN1_STRING **a, const unsigned char **pp,
-	     long length, int type)
-	{
-	ASN1_STRING *ret=NULL;
-	const unsigned char *p;
-	unsigned char *s;
-	long len;
-	int inf,tag,xclass;
-	int i=0;
-
-	p= *pp;
-	inf=ASN1_get_object(&p,&len,&tag,&xclass,length);
-	if (inf & 0x80) goto err;
-
-	if (tag >= 32)
-		{
-		i=ASN1_R_TAG_VALUE_TOO_HIGH;;
-		goto err;
-		}
-	if (!(ASN1_tag2bit(tag) & type))
-		{
-		i=ASN1_R_WRONG_TYPE;
-		goto err;
-		}
-
-	/* If a bit-string, exit early */
-	if (tag == V_ASN1_BIT_STRING)
-		return(d2i_ASN1_BIT_STRING(a,pp,length));
-
-	if ((a == NULL) || ((*a) == NULL))
-		{
-		if ((ret=ASN1_STRING_new()) == NULL) return(NULL);
-		}
-	else
-		ret=(*a);
-
-	if (len != 0)
-		{
-		s=(unsigned char *)OPENSSL_malloc((int)len+1);
-		if (s == NULL)
-			{
-			i=ERR_R_MALLOC_FAILURE;
-			goto err;
-			}
-		memcpy(s,p,(int)len);
-		s[len]='\0';
-		p+=len;
-		}
-	else
-		s=NULL;
-
-	if (ret->data != NULL) OPENSSL_free(ret->data);
-	ret->length=(int)len;
-	ret->data=s;
-	ret->type=tag;
-	if (a != NULL) (*a)=ret;
-	*pp=p;
-	return(ret);
-err:
-	ASN1err(ASN1_F_D2I_ASN1_TYPE_BYTES,i);
-	if ((ret != NULL) && ((a == NULL) || (*a != ret)))
-		ASN1_STRING_free(ret);
-	return(NULL);
-	}
-
-int i2d_ASN1_bytes(ASN1_STRING *a, unsigned char **pp, int tag, int xclass)
-	{
-	int ret,r,constructed;
-	unsigned char *p;
-
-	if (a == NULL)  return(0);
-
-	if (tag == V_ASN1_BIT_STRING)
-		return(i2d_ASN1_BIT_STRING(a,pp));
-		
-	ret=a->length;
-	r=ASN1_object_size(0,ret,tag);
-	if (pp == NULL) return(r);
-	p= *pp;
-
-	if ((tag == V_ASN1_SEQUENCE) || (tag == V_ASN1_SET))
-		constructed=1;
-	else
-		constructed=0;
-	ASN1_put_object(&p,constructed,ret,tag,xclass);
-	memcpy(p,a->data,a->length);
-	p+=a->length;
-	*pp= p;
-	return(r);
-	}
-
-ASN1_STRING *d2i_ASN1_bytes(ASN1_STRING **a, const unsigned char **pp,
-	     long length, int Ptag, int Pclass)
-	{
-	ASN1_STRING *ret=NULL;
-	const unsigned char *p;
-	unsigned char *s;
-	long len;
-	int inf,tag,xclass;
-	int i=0;
-
-	if ((a == NULL) || ((*a) == NULL))
-		{
-		if ((ret=ASN1_STRING_new()) == NULL) return(NULL);
-		}
-	else
-		ret=(*a);
-
-	p= *pp;
-	inf=ASN1_get_object(&p,&len,&tag,&xclass,length);
-	if (inf & 0x80)
-		{
-		i=ASN1_R_BAD_OBJECT_HEADER;
-		goto err;
-		}
-
-	if (tag != Ptag)
-		{
-		i=ASN1_R_WRONG_TAG;
-		goto err;
-		}
-
-	if (inf & V_ASN1_CONSTRUCTED)
-		{
-		ASN1_const_CTX c;
-
-		c.pp=pp;
-		c.p=p;
-		c.inf=inf;
-		c.slen=len;
-		c.tag=Ptag;
-		c.xclass=Pclass;
-		c.max=(length == 0)?0:(p+length);
-		if (!asn1_collate_primitive(ret,&c)) 
-			goto err; 
-		else
-			{
-			p=c.p;
-			}
-		}
-	else
-		{
-		if (len != 0)
-			{
-			if ((ret->length < len) || (ret->data == NULL))
-				{
-				if (ret->data != NULL) OPENSSL_free(ret->data);
-				s=(unsigned char *)OPENSSL_malloc((int)len + 1);
-				if (s == NULL)
-					{
-					i=ERR_R_MALLOC_FAILURE;
-					goto err;
-					}
-				}
-			else
-				s=ret->data;
-			memcpy(s,p,(int)len);
-			s[len] = '\0';
-			p+=len;
-			}
-		else
-			{
-			s=NULL;
-			if (ret->data != NULL) OPENSSL_free(ret->data);
-			}
-
-		ret->length=(int)len;
-		ret->data=s;
-		ret->type=Ptag;
-		}
-
-	if (a != NULL) (*a)=ret;
-	*pp=p;
-	return(ret);
-err:
-	if ((ret != NULL) && ((a == NULL) || (*a != ret)))
-		ASN1_STRING_free(ret);
-	ASN1err(ASN1_F_D2I_ASN1_BYTES,i);
-	return(NULL);
-	}
-
-
-/* We are about to parse 0..n d2i_ASN1_bytes objects, we are to collapse
- * them into the one structure that is then returned */
-/* There have been a few bug fixes for this function from
- * Paul Keogh <paul.keogh@sse.ie>, many thanks to him */
-static int asn1_collate_primitive(ASN1_STRING *a, ASN1_const_CTX *c)
-	{
-	ASN1_STRING *os=NULL;
-	BUF_MEM b;
-	int num;
-
-	b.length=0;
-	b.max=0;
-	b.data=NULL;
-
-	if (a == NULL)
-		{
-		c->error=ERR_R_PASSED_NULL_PARAMETER;
-		goto err;
-		}
-
-	num=0;
-	for (;;)
-		{
-		if (c->inf & 1)
-			{
-			c->eos=ASN1_const_check_infinite_end(&c->p,
-				(long)(c->max-c->p));
-			if (c->eos) break;
-			}
-		else
-			{
-			if (c->slen <= 0) break;
-			}
-
-		c->q=c->p;
-		if (d2i_ASN1_bytes(&os,&c->p,c->max-c->p,c->tag,c->xclass)
-			== NULL)
-			{
-			c->error=ERR_R_ASN1_LIB;
-			goto err;
-			}
-
-		if (!BUF_MEM_grow_clean(&b,num+os->length))
-			{
-			c->error=ERR_R_BUF_LIB;
-			goto err;
-			}
-		memcpy(&(b.data[num]),os->data,os->length);
-		if (!(c->inf & 1))
-			c->slen-=(c->p-c->q);
-		num+=os->length;
-		}
-
-	if (!asn1_const_Finish(c)) goto err;
-
-	a->length=num;
-	if (a->data != NULL) OPENSSL_free(a->data);
-	a->data=(unsigned char *)b.data;
-	if (os != NULL) ASN1_STRING_free(os);
-	return(1);
-err:
-	ASN1err(ASN1_F_ASN1_COLLATE_PRIMITIVE,c->error);
-	if (os != NULL) ASN1_STRING_free(os);
-	if (b.data != NULL) OPENSSL_free(b.data);
-	return(0);
-	}
-
diff --git a/crypto/openssl/crypto/asn1/a_d2i_fp.c b/crypto/openssl/crypto/asn1/a_d2i_fp.c
deleted file mode 100644
index ece40bc4c003..000000000000
--- a/crypto/openssl/crypto/asn1/a_d2i_fp.c
+++ /dev/null
@@ -1,260 +0,0 @@
-/* crypto/asn1/a_d2i_fp.c */
-/* Copyright (C) 1995-1998 Eric Young (eay@cryptsoft.com)
- * All rights reserved.
- *
- * This package is an SSL implementation written
- * by Eric Young (eay@cryptsoft.com).
- * The implementation was written so as to conform with Netscapes SSL.
- * 
- * This library is free for commercial and non-commercial use as long as
- * the following conditions are aheared to.  The following conditions
- * apply to all code found in this distribution, be it the RC4, RSA,
- * lhash, DES, etc., code; not just the SSL code.  The SSL documentation
- * included with this distribution is covered by the same copyright terms
- * except that the holder is Tim Hudson (tjh@cryptsoft.com).
- * 
- * Copyright remains Eric Young's, and as such any Copyright notices in
- * the code are not to be removed.
- * If this package is used in a product, Eric Young should be given attribution
- * as the author of the parts of the library used.
- * This can be in the form of a textual message at program startup or
- * in documentation (online or textual) provided with the package.
- * 
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions
- * are met:
- * 1. Redistributions of source code must retain the copyright
- *    notice, this list of conditions and the following disclaimer.
- * 2. Redistributions in binary form must reproduce the above copyright
- *    notice, this list of conditions and the following disclaimer in the
- *    documentation and/or other materials provided with the distribution.
- * 3. All advertising materials mentioning features or use of this software
- *    must display the following acknowledgement:
- *    "This product includes cryptographic software written by
- *     Eric Young (eay@cryptsoft.com)"
- *    The word 'cryptographic' can be left out if the rouines from the library
- *    being used are not cryptographic related :-).
- * 4. If you include any Windows specific code (or a derivative thereof) from 
- *    the apps directory (application code) you must include an acknowledgement:
- *    "This product includes software written by Tim Hudson (tjh@cryptsoft.com)"
- * 
- * THIS SOFTWARE IS PROVIDED BY ERIC YOUNG ``AS IS'' AND
- * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
- * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
- * ARE DISCLAIMED.  IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE
- * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
- * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
- * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
- * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
- * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
- * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
- * SUCH DAMAGE.
- * 
- * The licence and distribution terms for any publically available version or
- * derivative of this code cannot be changed.  i.e. this code cannot simply be
- * copied and put under another distribution licence
- * [including the GNU Public Licence.]
- */
-
-#include <stdio.h>
-#include "cryptlib.h"
-#include <openssl/buffer.h>
-#include <openssl/asn1_mac.h>
-
-static int asn1_d2i_read_bio(BIO *in, BUF_MEM **pb);
-
-#ifndef NO_OLD_ASN1
-#ifndef OPENSSL_NO_FP_API
-
-void *ASN1_d2i_fp(void *(*xnew)(void), d2i_of_void *d2i, FILE *in, void **x)
-        {
-        BIO *b;
-        void *ret;
-
-        if ((b=BIO_new(BIO_s_file())) == NULL)
-		{
-		ASN1err(ASN1_F_ASN1_D2I_FP,ERR_R_BUF_LIB);
-                return(NULL);
-		}
-        BIO_set_fp(b,in,BIO_NOCLOSE);
-        ret=ASN1_d2i_bio(xnew,d2i,b,x);
-        BIO_free(b);
-        return(ret);
-        }
-#endif
-
-void *ASN1_d2i_bio(void *(*xnew)(void), d2i_of_void *d2i, BIO *in, void **x)
-	{
-	BUF_MEM *b = NULL;
-	const unsigned char *p;
-	void *ret=NULL;
-	int len;
-
-	len = asn1_d2i_read_bio(in, &b);
-	if(len < 0) goto err;
-
-	p=(unsigned char *)b->data;
-	ret=d2i(x,&p,len);
-err:
-	if (b != NULL) BUF_MEM_free(b);
-	return(ret);
-	}
-
-#endif
-
-void *ASN1_item_d2i_bio(const ASN1_ITEM *it, BIO *in, void *x)
-	{
-	BUF_MEM *b = NULL;
-	const unsigned char *p;
-	void *ret=NULL;
-	int len;
-
-	len = asn1_d2i_read_bio(in, &b);
-	if(len < 0) goto err;
-
-	p=(const unsigned char *)b->data;
-	ret=ASN1_item_d2i(x,&p,len, it);
-err:
-	if (b != NULL) BUF_MEM_free(b);
-	return(ret);
-	}
-
-#ifndef OPENSSL_NO_FP_API
-void *ASN1_item_d2i_fp(const ASN1_ITEM *it, FILE *in, void *x)
-        {
-        BIO *b;
-        char *ret;
-
-        if ((b=BIO_new(BIO_s_file())) == NULL)
-		{
-		ASN1err(ASN1_F_ASN1_ITEM_D2I_FP,ERR_R_BUF_LIB);
-                return(NULL);
-		}
-        BIO_set_fp(b,in,BIO_NOCLOSE);
-        ret=ASN1_item_d2i_bio(it,b,x);
-        BIO_free(b);
-        return(ret);
-        }
-#endif
-
-#define HEADER_SIZE   8
-static int asn1_d2i_read_bio(BIO *in, BUF_MEM **pb)
-	{
-	BUF_MEM *b;
-	unsigned char *p;
-	int i;
-	int ret=-1;
-	ASN1_const_CTX c;
-	int want=HEADER_SIZE;
-	int eos=0;
-#if defined(__GNUC__) && defined(__ia64)
-	/* pathetic compiler bug in all known versions as of Nov. 2002 */
-	long off=0;
-#else
-	int off=0;
-#endif
-	int len=0;
-
-	b=BUF_MEM_new();
-	if (b == NULL)
-		{
-		ASN1err(ASN1_F_ASN1_D2I_READ_BIO,ERR_R_MALLOC_FAILURE);
-		return -1;
-		}
-
-	ERR_clear_error();
-	for (;;)
-		{
-		if (want >= (len-off))
-			{
-			want-=(len-off);
-
-			if (!BUF_MEM_grow_clean(b,len+want))
-				{
-				ASN1err(ASN1_F_ASN1_D2I_READ_BIO,ERR_R_MALLOC_FAILURE);
-				goto err;
-				}
-			i=BIO_read(in,&(b->data[len]),want);
-			if ((i < 0) && ((len-off) == 0))
-				{
-				ASN1err(ASN1_F_ASN1_D2I_READ_BIO,ASN1_R_NOT_ENOUGH_DATA);
-				goto err;
-				}
-			if (i > 0)
-				len+=i;
-			}
-		/* else data already loaded */
-
-		p=(unsigned char *)&(b->data[off]);
-		c.p=p;
-		c.inf=ASN1_get_object(&(c.p),&(c.slen),&(c.tag),&(c.xclass),
-			len-off);
-		if (c.inf & 0x80)
-			{
-			unsigned long e;
-
-			e=ERR_GET_REASON(ERR_peek_error());
-			if (e != ASN1_R_TOO_LONG)
-				goto err;
-			else
-				ERR_clear_error(); /* clear error */
-			}
-		i=c.p-p;/* header length */
-		off+=i;	/* end of data */
-
-		if (c.inf & 1)
-			{
-			/* no data body so go round again */
-			eos++;
-			want=HEADER_SIZE;
-			}
-		else if (eos && (c.slen == 0) && (c.tag == V_ASN1_EOC))
-			{
-			/* eos value, so go back and read another header */
-			eos--;
-			if (eos <= 0)
-				break;
-			else
-				want=HEADER_SIZE;
-			}
-		else 
-			{
-			/* suck in c.slen bytes of data */
-			want=(int)c.slen;
-			if (want > (len-off))
-				{
-				want-=(len-off);
-				if (!BUF_MEM_grow_clean(b,len+want))
-					{
-					ASN1err(ASN1_F_ASN1_D2I_READ_BIO,ERR_R_MALLOC_FAILURE);
-					goto err;
-					}
-				while (want > 0)
-					{
-					i=BIO_read(in,&(b->data[len]),want);
-					if (i <= 0)
-						{
-						ASN1err(ASN1_F_ASN1_D2I_READ_BIO,
-						    ASN1_R_NOT_ENOUGH_DATA);
-						goto err;
-						}
-					len+=i;
-					want -= i;
-					}
-				}
-			off+=(int)c.slen;
-			if (eos <= 0)
-				{
-				break;
-				}
-			else
-				want=HEADER_SIZE;
-			}
-		}
-
-	*pb = b;
-	return off;
-err:
-	if (b != NULL) BUF_MEM_free(b);
-	return(ret);
-	}
diff --git a/crypto/openssl/crypto/asn1/a_digest.c b/crypto/openssl/crypto/asn1/a_digest.c
deleted file mode 100644
index d00d9e22b188..000000000000
--- a/crypto/openssl/crypto/asn1/a_digest.c
+++ /dev/null
@@ -1,111 +0,0 @@
-/* crypto/asn1/a_digest.c */
-/* Copyright (C) 1995-1998 Eric Young (eay@cryptsoft.com)
- * All rights reserved.
- *
- * This package is an SSL implementation written
- * by Eric Young (eay@cryptsoft.com).
- * The implementation was written so as to conform with Netscapes SSL.
- * 
- * This library is free for commercial and non-commercial use as long as
- * the following conditions are aheared to.  The following conditions
- * apply to all code found in this distribution, be it the RC4, RSA,
- * lhash, DES, etc., code; not just the SSL code.  The SSL documentation
- * included with this distribution is covered by the same copyright terms
- * except that the holder is Tim Hudson (tjh@cryptsoft.com).
- * 
- * Copyright remains Eric Young's, and as such any Copyright notices in
- * the code are not to be removed.
- * If this package is used in a product, Eric Young should be given attribution
- * as the author of the parts of the library used.
- * This can be in the form of a textual message at program startup or
- * in documentation (online or textual) provided with the package.
- * 
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions
- * are met:
- * 1. Redistributions of source code must retain the copyright
- *    notice, this list of conditions and the following disclaimer.
- * 2. Redistributions in binary form must reproduce the above copyright
- *    notice, this list of conditions and the following disclaimer in the
- *    documentation and/or other materials provided with the distribution.
- * 3. All advertising materials mentioning features or use of this software
- *    must display the following acknowledgement:
- *    "This product includes cryptographic software written by
- *     Eric Young (eay@cryptsoft.com)"
- *    The word 'cryptographic' can be left out if the rouines from the library
- *    being used are not cryptographic related :-).
- * 4. If you include any Windows specific code (or a derivative thereof) from 
- *    the apps directory (application code) you must include an acknowledgement:
- *    "This product includes software written by Tim Hudson (tjh@cryptsoft.com)"
- * 
- * THIS SOFTWARE IS PROVIDED BY ERIC YOUNG ``AS IS'' AND
- * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
- * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
- * ARE DISCLAIMED.  IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE
- * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
- * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
- * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
- * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
- * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
- * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
- * SUCH DAMAGE.
- * 
- * The licence and distribution terms for any publically available version or
- * derivative of this code cannot be changed.  i.e. this code cannot simply be
- * copied and put under another distribution licence
- * [including the GNU Public Licence.]
- */
-
-#include <stdio.h>
-#include <time.h>
-
-#include "cryptlib.h"
-
-#ifndef NO_SYS_TYPES_H
-# include <sys/types.h>
-#endif
-
-#include <openssl/err.h>
-#include <openssl/evp.h>
-#include <openssl/buffer.h>
-#include <openssl/x509.h>
-
-#ifndef NO_ASN1_OLD
-
-int ASN1_digest(i2d_of_void *i2d, const EVP_MD *type, char *data,
-		unsigned char *md, unsigned int *len)
-	{
-	int i;
-	unsigned char *str,*p;
-
-	i=i2d(data,NULL);
-	if ((str=(unsigned char *)OPENSSL_malloc(i)) == NULL)
-		{
-		ASN1err(ASN1_F_ASN1_DIGEST,ERR_R_MALLOC_FAILURE);
-		return(0);
-		}
-	p=str;
-	i2d(data,&p);
-
-	EVP_Digest(str, i, md, len, type, NULL);
-	OPENSSL_free(str);
-	return(1);
-	}
-
-#endif
-
-
-int ASN1_item_digest(const ASN1_ITEM *it, const EVP_MD *type, void *asn,
-		unsigned char *md, unsigned int *len)
-	{
-	int i;
-	unsigned char *str = NULL;
-
-	i=ASN1_item_i2d(asn,&str, it);
-	if (!str) return(0);
-
-	EVP_Digest(str, i, md, len, type, NULL);
-	OPENSSL_free(str);
-	return(1);
-	}
-
diff --git a/crypto/openssl/crypto/asn1/a_dup.c b/crypto/openssl/crypto/asn1/a_dup.c
deleted file mode 100644
index 199d50f521cd..000000000000
--- a/crypto/openssl/crypto/asn1/a_dup.c
+++ /dev/null
@@ -1,109 +0,0 @@
-/* crypto/asn1/a_dup.c */
-/* Copyright (C) 1995-1998 Eric Young (eay@cryptsoft.com)
- * All rights reserved.
- *
- * This package is an SSL implementation written
- * by Eric Young (eay@cryptsoft.com).
- * The implementation was written so as to conform with Netscapes SSL.
- * 
- * This library is free for commercial and non-commercial use as long as
- * the following conditions are aheared to.  The following conditions
- * apply to all code found in this distribution, be it the RC4, RSA,
- * lhash, DES, etc., code; not just the SSL code.  The SSL documentation
- * included with this distribution is covered by the same copyright terms
- * except that the holder is Tim Hudson (tjh@cryptsoft.com).
- * 
- * Copyright remains Eric Young's, and as such any Copyright notices in
- * the code are not to be removed.
- * If this package is used in a product, Eric Young should be given attribution
- * as the author of the parts of the library used.
- * This can be in the form of a textual message at program startup or
- * in documentation (online or textual) provided with the package.
- * 
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions
- * are met:
- * 1. Redistributions of source code must retain the copyright
- *    notice, this list of conditions and the following disclaimer.
- * 2. Redistributions in binary form must reproduce the above copyright
- *    notice, this list of conditions and the following disclaimer in the
- *    documentation and/or other materials provided with the distribution.
- * 3. All advertising materials mentioning features or use of this software
- *    must display the following acknowledgement:
- *    "This product includes cryptographic software written by
- *     Eric Young (eay@cryptsoft.com)"
- *    The word 'cryptographic' can be left out if the rouines from the library
- *    being used are not cryptographic related :-).
- * 4. If you include any Windows specific code (or a derivative thereof) from 
- *    the apps directory (application code) you must include an acknowledgement:
- *    "This product includes software written by Tim Hudson (tjh@cryptsoft.com)"
- * 
- * THIS SOFTWARE IS PROVIDED BY ERIC YOUNG ``AS IS'' AND
- * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
- * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
- * ARE DISCLAIMED.  IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE
- * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
- * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
- * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
- * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
- * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
- * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
- * SUCH DAMAGE.
- * 
- * The licence and distribution terms for any publically available version or
- * derivative of this code cannot be changed.  i.e. this code cannot simply be
- * copied and put under another distribution licence
- * [including the GNU Public Licence.]
- */
-
-#include <stdio.h>
-#include "cryptlib.h"
-#include <openssl/asn1.h>
-
-#ifndef NO_OLD_ASN1
-
-void *ASN1_dup(i2d_of_void *i2d, d2i_of_void *d2i, char *x)
-	{
-	unsigned char *b,*p;
-	const unsigned char *p2;
-	int i;
-	char *ret;
-
-	if (x == NULL) return(NULL);
-
-	i=i2d(x,NULL);
-	b=OPENSSL_malloc(i+10);
-	if (b == NULL)
-		{ ASN1err(ASN1_F_ASN1_DUP,ERR_R_MALLOC_FAILURE); return(NULL); }
-	p= b;
-	i=i2d(x,&p);
-	p2= b;
-	ret=d2i(NULL,&p2,i);
-	OPENSSL_free(b);
-	return(ret);
-	}
-
-#endif
-
-/* ASN1_ITEM version of dup: this follows the model above except we don't need
- * to allocate the buffer. At some point this could be rewritten to directly dup
- * the underlying structure instead of doing and encode and decode.
- */
-
-void *ASN1_item_dup(const ASN1_ITEM *it, void *x)
-	{
-	unsigned char *b = NULL;
-	const unsigned char *p;
-	long i;
-	void *ret;
-
-	if (x == NULL) return(NULL);
-
-	i=ASN1_item_i2d(x,&b,it);
-	if (b == NULL)
-		{ ASN1err(ASN1_F_ASN1_ITEM_DUP,ERR_R_MALLOC_FAILURE); return(NULL); }
-	p= b;
-	ret=ASN1_item_d2i(NULL,&p,i, it);
-	OPENSSL_free(b);
-	return(ret);
-	}
diff --git a/crypto/openssl/crypto/asn1/a_enum.c b/crypto/openssl/crypto/asn1/a_enum.c
deleted file mode 100644
index fe9aa13b9cd5..000000000000
--- a/crypto/openssl/crypto/asn1/a_enum.c
+++ /dev/null
@@ -1,182 +0,0 @@
-/* crypto/asn1/a_enum.c */
-/* Copyright (C) 1995-1998 Eric Young (eay@cryptsoft.com)
- * All rights reserved.
- *
- * This package is an SSL implementation written
- * by Eric Young (eay@cryptsoft.com).
- * The implementation was written so as to conform with Netscapes SSL.
- * 
- * This library is free for commercial and non-commercial use as long as
- * the following conditions are aheared to.  The following conditions
- * apply to all code found in this distribution, be it the RC4, RSA,
- * lhash, DES, etc., code; not just the SSL code.  The SSL documentation
- * included with this distribution is covered by the same copyright terms
- * except that the holder is Tim Hudson (tjh@cryptsoft.com).
- * 
- * Copyright remains Eric Young's, and as such any Copyright notices in
- * the code are not to be removed.
- * If this package is used in a product, Eric Young should be given attribution
- * as the author of the parts of the library used.
- * This can be in the form of a textual message at program startup or
- * in documentation (online or textual) provided with the package.
- * 
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions
- * are met:
- * 1. Redistributions of source code must retain the copyright
- *    notice, this list of conditions and the following disclaimer.
- * 2. Redistributions in binary form must reproduce the above copyright
- *    notice, this list of conditions and the following disclaimer in the
- *    documentation and/or other materials provided with the distribution.
- * 3. All advertising materials mentioning features or use of this software
- *    must display the following acknowledgement:
- *    "This product includes cryptographic software written by
- *     Eric Young (eay@cryptsoft.com)"
- *    The word 'cryptographic' can be left out if the rouines from the library
- *    being used are not cryptographic related :-).
- * 4. If you include any Windows specific code (or a derivative thereof) from 
- *    the apps directory (application code) you must include an acknowledgement:
- *    "This product includes software written by Tim Hudson (tjh@cryptsoft.com)"
- * 
- * THIS SOFTWARE IS PROVIDED BY ERIC YOUNG ``AS IS'' AND
- * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
- * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
- * ARE DISCLAIMED.  IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE
- * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
- * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
- * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
- * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
- * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
- * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
- * SUCH DAMAGE.
- * 
- * The licence and distribution terms for any publically available version or
- * derivative of this code cannot be changed.  i.e. this code cannot simply be
- * copied and put under another distribution licence
- * [including the GNU Public Licence.]
- */
-
-#include <stdio.h>
-#include "cryptlib.h"
-#include <openssl/asn1.h>
-#include <openssl/bn.h>
-
-/* 
- * Code for ENUMERATED type: identical to INTEGER apart from a different tag.
- * for comments on encoding see a_int.c
- */
-
-int ASN1_ENUMERATED_set(ASN1_ENUMERATED *a, long v)
-	{
-	int j,k;
-	unsigned int i;
-	unsigned char buf[sizeof(long)+1];
-	long d;
-
-	a->type=V_ASN1_ENUMERATED;
-	if (a->length < (int)(sizeof(long)+1))
-		{
-		if (a->data != NULL)
-			OPENSSL_free(a->data);
-		if ((a->data=(unsigned char *)OPENSSL_malloc(sizeof(long)+1)) != NULL)
-			memset((char *)a->data,0,sizeof(long)+1);
-		}
-	if (a->data == NULL)
-		{
-		ASN1err(ASN1_F_ASN1_ENUMERATED_SET,ERR_R_MALLOC_FAILURE);
-		return(0);
-		}
-	d=v;
-	if (d < 0)
-		{
-		d= -d;
-		a->type=V_ASN1_NEG_ENUMERATED;
-		}
-
-	for (i=0; i<sizeof(long); i++)
-		{
-		if (d == 0) break;
-		buf[i]=(int)d&0xff;
-		d>>=8;
-		}
-	j=0;
-	for (k=i-1; k >=0; k--)
-		a->data[j++]=buf[k];
-	a->length=j;
-	return(1);
-	}
-
-long ASN1_ENUMERATED_get(ASN1_ENUMERATED *a)
-	{
-	int neg=0,i;
-	long r=0;
-
-	if (a == NULL) return(0L);
-	i=a->type;
-	if (i == V_ASN1_NEG_ENUMERATED)
-		neg=1;
-	else if (i != V_ASN1_ENUMERATED)
-		return -1;
-	
-	if (a->length > (int)sizeof(long))
-		{
-		/* hmm... a bit ugly */
-		return(0xffffffffL);
-		}
-	if (a->data == NULL)
-		return 0;
-
-	for (i=0; i<a->length; i++)
-		{
-		r<<=8;
-		r|=(unsigned char)a->data[i];
-		}
-	if (neg) r= -r;
-	return(r);
-	}
-
-ASN1_ENUMERATED *BN_to_ASN1_ENUMERATED(BIGNUM *bn, ASN1_ENUMERATED *ai)
-	{
-	ASN1_ENUMERATED *ret;
-	int len,j;
-
-	if (ai == NULL)
-		ret=M_ASN1_ENUMERATED_new();
-	else
-		ret=ai;
-	if (ret == NULL)
-		{
-		ASN1err(ASN1_F_BN_TO_ASN1_ENUMERATED,ERR_R_NESTED_ASN1_ERROR);
-		goto err;
-		}
-	if(BN_is_negative(bn)) ret->type = V_ASN1_NEG_ENUMERATED;
-	else ret->type=V_ASN1_ENUMERATED;
-	j=BN_num_bits(bn);
-	len=((j == 0)?0:((j/8)+1));
-	if (ret->length < len+4)
-		{
-		unsigned char *new_data=OPENSSL_realloc(ret->data, len+4);
-		if (!new_data)
-			{
-			ASN1err(ASN1_F_BN_TO_ASN1_ENUMERATED,ERR_R_MALLOC_FAILURE);
-			goto err;
-			}
-		ret->data=new_data;
-		}
-
-	ret->length=BN_bn2bin(bn,ret->data);
-	return(ret);
-err:
-	if (ret != ai) M_ASN1_ENUMERATED_free(ret);
-	return(NULL);
-	}
-
-BIGNUM *ASN1_ENUMERATED_to_BN(ASN1_ENUMERATED *ai, BIGNUM *bn)
-	{
-	BIGNUM *ret;
-
-	if ((ret=BN_bin2bn(ai->data,ai->length,bn)) == NULL)
-		ASN1err(ASN1_F_ASN1_ENUMERATED_TO_BN,ASN1_R_BN_LIB);
-	else if(ai->type == V_ASN1_NEG_ENUMERATED) BN_set_negative(ret,1);
-	return(ret);
-	}
diff --git a/crypto/openssl/crypto/asn1/a_gentm.c b/crypto/openssl/crypto/asn1/a_gentm.c
deleted file mode 100644
index def79062a57d..000000000000
--- a/crypto/openssl/crypto/asn1/a_gentm.c
+++ /dev/null
@@ -1,246 +0,0 @@
-/* crypto/asn1/a_gentm.c */
-/* Copyright (C) 1995-1998 Eric Young (eay@cryptsoft.com)
- * All rights reserved.
- *
- * This package is an SSL implementation written
- * by Eric Young (eay@cryptsoft.com).
- * The implementation was written so as to conform with Netscapes SSL.
- * 
- * This library is free for commercial and non-commercial use as long as
- * the following conditions are aheared to.  The following conditions
- * apply to all code found in this distribution, be it the RC4, RSA,
- * lhash, DES, etc., code; not just the SSL code.  The SSL documentation
- * included with this distribution is covered by the same copyright terms
- * except that the holder is Tim Hudson (tjh@cryptsoft.com).
- * 
- * Copyright remains Eric Young's, and as such any Copyright notices in
- * the code are not to be removed.
- * If this package is used in a product, Eric Young should be given attribution
- * as the author of the parts of the library used.
- * This can be in the form of a textual message at program startup or
- * in documentation (online or textual) provided with the package.
- * 
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions
- * are met:
- * 1. Redistributions of source code must retain the copyright
- *    notice, this list of conditions and the following disclaimer.
- * 2. Redistributions in binary form must reproduce the above copyright
- *    notice, this list of conditions and the following disclaimer in the
- *    documentation and/or other materials provided with the distribution.
- * 3. All advertising materials mentioning features or use of this software
- *    must display the following acknowledgement:
- *    "This product includes cryptographic software written by
- *     Eric Young (eay@cryptsoft.com)"
- *    The word 'cryptographic' can be left out if the rouines from the library
- *    being used are not cryptographic related :-).
- * 4. If you include any Windows specific code (or a derivative thereof) from 
- *    the apps directory (application code) you must include an acknowledgement:
- *    "This product includes software written by Tim Hudson (tjh@cryptsoft.com)"
- * 
- * THIS SOFTWARE IS PROVIDED BY ERIC YOUNG ``AS IS'' AND
- * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
- * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
- * ARE DISCLAIMED.  IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE
- * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
- * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
- * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
- * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
- * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
- * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
- * SUCH DAMAGE.
- * 
- * The licence and distribution terms for any publically available version or
- * derivative of this code cannot be changed.  i.e. this code cannot simply be
- * copied and put under another distribution licence
- * [including the GNU Public Licence.]
- */
-
-/* GENERALIZEDTIME implementation, written by Steve Henson. Based on UTCTIME */
-
-#include <stdio.h>
-#include <time.h>
-#include "cryptlib.h"
-#include "o_time.h"
-#include <openssl/asn1.h>
-
-#if 0
-
-int i2d_ASN1_GENERALIZEDTIME(ASN1_GENERALIZEDTIME *a, unsigned char **pp)
-	{
-#ifdef CHARSET_EBCDIC
-	/* KLUDGE! We convert to ascii before writing DER */
-	int len;
-	char tmp[24];
-	ASN1_STRING tmpstr = *(ASN1_STRING *)a;
-
-	len = tmpstr.length;
-	ebcdic2ascii(tmp, tmpstr.data, (len >= sizeof tmp) ? sizeof tmp : len);
-	tmpstr.data = tmp;
-
-	a = (ASN1_GENERALIZEDTIME *) &tmpstr;
-#endif
-	return(i2d_ASN1_bytes((ASN1_STRING *)a,pp,
-		V_ASN1_GENERALIZEDTIME,V_ASN1_UNIVERSAL));
-	}
-
-
-ASN1_GENERALIZEDTIME *d2i_ASN1_GENERALIZEDTIME(ASN1_GENERALIZEDTIME **a,
-	     unsigned char **pp, long length)
-	{
-	ASN1_GENERALIZEDTIME *ret=NULL;
-
-	ret=(ASN1_GENERALIZEDTIME *)d2i_ASN1_bytes((ASN1_STRING **)a,pp,length,
-		V_ASN1_GENERALIZEDTIME,V_ASN1_UNIVERSAL);
-	if (ret == NULL)
-		{
-		ASN1err(ASN1_F_D2I_ASN1_GENERALIZEDTIME,ERR_R_NESTED_ASN1_ERROR);
-		return(NULL);
-		}
-#ifdef CHARSET_EBCDIC
-	ascii2ebcdic(ret->data, ret->data, ret->length);
-#endif
-	if (!ASN1_GENERALIZEDTIME_check(ret))
-		{
-		ASN1err(ASN1_F_D2I_ASN1_GENERALIZEDTIME,ASN1_R_INVALID_TIME_FORMAT);
-		goto err;
-		}
-
-	return(ret);
-err:
-	if ((ret != NULL) && ((a == NULL) || (*a != ret)))
-		M_ASN1_GENERALIZEDTIME_free(ret);
-	return(NULL);
-	}
-
-#endif
-
-int ASN1_GENERALIZEDTIME_check(ASN1_GENERALIZEDTIME *d)
-	{
-	static int min[9]={ 0, 0, 1, 1, 0, 0, 0, 0, 0};
-	static int max[9]={99, 99,12,31,23,59,59,12,59};
-	char *a;
-	int n,i,l,o;
-
-	if (d->type != V_ASN1_GENERALIZEDTIME) return(0);
-	l=d->length;
-	a=(char *)d->data;
-	o=0;
-	/* GENERALIZEDTIME is similar to UTCTIME except the year is
-         * represented as YYYY. This stuff treats everything as a two digit
-         * field so make first two fields 00 to 99
-         */
-	if (l < 13) goto err;
-	for (i=0; i<7; i++)
-		{
-		if ((i == 6) && ((a[o] == 'Z') ||
-			(a[o] == '+') || (a[o] == '-')))
-			{ i++; break; }
-		if ((a[o] < '0') || (a[o] > '9')) goto err;
-		n= a[o]-'0';
-		if (++o > l) goto err;
-
-		if ((a[o] < '0') || (a[o] > '9')) goto err;
-		n=(n*10)+ a[o]-'0';
-		if (++o > l) goto err;
-
-		if ((n < min[i]) || (n > max[i])) goto err;
-		}
-	/* Optional fractional seconds: decimal point followed by one
-	 * or more digits.
-	 */
-	if (a[o] == '.')
-		{
-		if (++o > l) goto err;
-		i = o;
-		while ((a[o] >= '0') && (a[o] <= '9') && (o <= l))
-			o++;
-		/* Must have at least one digit after decimal point */
-		if (i == o) goto err;
-		}
-
-	if (a[o] == 'Z')
-		o++;
-	else if ((a[o] == '+') || (a[o] == '-'))
-		{
-		o++;
-		if (o+4 > l) goto err;
-		for (i=7; i<9; i++)
-			{
-			if ((a[o] < '0') || (a[o] > '9')) goto err;
-			n= a[o]-'0';
-			o++;
-			if ((a[o] < '0') || (a[o] > '9')) goto err;
-			n=(n*10)+ a[o]-'0';
-			if ((n < min[i]) || (n > max[i])) goto err;
-			o++;
-			}
-		}
-	return(o == l);
-err:
-	return(0);
-	}
-
-int ASN1_GENERALIZEDTIME_set_string(ASN1_GENERALIZEDTIME *s, const char *str)
-	{
-	ASN1_GENERALIZEDTIME t;
-
-	t.type=V_ASN1_GENERALIZEDTIME;
-	t.length=strlen(str);
-	t.data=(unsigned char *)str;
-	if (ASN1_GENERALIZEDTIME_check(&t))
-		{
-		if (s != NULL)
-			{
-			if (!ASN1_STRING_set((ASN1_STRING *)s,
-				(unsigned char *)str,t.length))
-				return 0;
-			s->type=V_ASN1_GENERALIZEDTIME;
-			}
-		return(1);
-		}
-	else
-		return(0);
-	}
-
-ASN1_GENERALIZEDTIME *ASN1_GENERALIZEDTIME_set(ASN1_GENERALIZEDTIME *s,
-	     time_t t)
-	{
-	char *p;
-	struct tm *ts;
-	struct tm data;
-	size_t len = 20; 
-
-	if (s == NULL)
-		s=M_ASN1_GENERALIZEDTIME_new();
-	if (s == NULL)
-		return(NULL);
-
-	ts=OPENSSL_gmtime(&t, &data);
-	if (ts == NULL)
-		return(NULL);
-
-	p=(char *)s->data;
-	if ((p == NULL) || ((size_t)s->length < len))
-		{
-		p=OPENSSL_malloc(len);
-		if (p == NULL)
-			{
-			ASN1err(ASN1_F_ASN1_GENERALIZEDTIME_SET,
-				ERR_R_MALLOC_FAILURE);
-			return(NULL);
-			}
-		if (s->data != NULL)
-			OPENSSL_free(s->data);
-		s->data=(unsigned char *)p;
-		}
-
-	BIO_snprintf(p,len,"%04d%02d%02d%02d%02d%02dZ",ts->tm_year + 1900,
-		     ts->tm_mon+1,ts->tm_mday,ts->tm_hour,ts->tm_min,ts->tm_sec);
-	s->length=strlen(p);
-	s->type=V_ASN1_GENERALIZEDTIME;
-#ifdef CHARSET_EBCDIC_not
-	ebcdic2ascii(s->data, s->data, s->length);
-#endif
-	return(s);
-	}
diff --git a/crypto/openssl/crypto/asn1/a_hdr.c b/crypto/openssl/crypto/asn1/a_hdr.c
deleted file mode 100644
index d1c2a7b9e3a0..000000000000
--- a/crypto/openssl/crypto/asn1/a_hdr.c
+++ /dev/null
@@ -1,119 +0,0 @@
-/* crypto/asn1/a_hdr.c */
-/* Copyright (C) 1995-1998 Eric Young (eay@cryptsoft.com)
- * All rights reserved.
- *
- * This package is an SSL implementation written
- * by Eric Young (eay@cryptsoft.com).
- * The implementation was written so as to conform with Netscapes SSL.
- * 
- * This library is free for commercial and non-commercial use as long as
- * the following conditions are aheared to.  The following conditions
- * apply to all code found in this distribution, be it the RC4, RSA,
- * lhash, DES, etc., code; not just the SSL code.  The SSL documentation
- * included with this distribution is covered by the same copyright terms
- * except that the holder is Tim Hudson (tjh@cryptsoft.com).
- * 
- * Copyright remains Eric Young's, and as such any Copyright notices in
- * the code are not to be removed.
- * If this package is used in a product, Eric Young should be given attribution
- * as the author of the parts of the library used.
- * This can be in the form of a textual message at program startup or
- * in documentation (online or textual) provided with the package.
- * 
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions
- * are met:
- * 1. Redistributions of source code must retain the copyright
- *    notice, this list of conditions and the following disclaimer.
- * 2. Redistributions in binary form must reproduce the above copyright
- *    notice, this list of conditions and the following disclaimer in the
- *    documentation and/or other materials provided with the distribution.
- * 3. All advertising materials mentioning features or use of this software
- *    must display the following acknowledgement:
- *    "This product includes cryptographic software written by
- *     Eric Young (eay@cryptsoft.com)"
- *    The word 'cryptographic' can be left out if the rouines from the library
- *    being used are not cryptographic related :-).
- * 4. If you include any Windows specific code (or a derivative thereof) from 
- *    the apps directory (application code) you must include an acknowledgement:
- *    "This product includes software written by Tim Hudson (tjh@cryptsoft.com)"
- * 
- * THIS SOFTWARE IS PROVIDED BY ERIC YOUNG ``AS IS'' AND
- * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
- * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
- * ARE DISCLAIMED.  IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE
- * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
- * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
- * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
- * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
- * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
- * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
- * SUCH DAMAGE.
- * 
- * The licence and distribution terms for any publically available version or
- * derivative of this code cannot be changed.  i.e. this code cannot simply be
- * copied and put under another distribution licence
- * [including the GNU Public Licence.]
- */
-
-#include <stdio.h>
-#include "cryptlib.h"
-#include <openssl/asn1_mac.h>
-#include <openssl/asn1.h>
-
-int i2d_ASN1_HEADER(ASN1_HEADER *a, unsigned char **pp)
-	{
-	M_ASN1_I2D_vars(a);
-
-	M_ASN1_I2D_len(a->header,	i2d_ASN1_OCTET_STRING);
-	M_ASN1_I2D_len(a->data,		a->meth->i2d);
-
-	M_ASN1_I2D_seq_total();
-
-	M_ASN1_I2D_put(a->header,	i2d_ASN1_OCTET_STRING);
-	M_ASN1_I2D_put(a->data,		a->meth->i2d);
-
-	M_ASN1_I2D_finish();
-	}
-
-ASN1_HEADER *d2i_ASN1_HEADER(ASN1_HEADER **a, const unsigned char **pp,
-	     long length)
-	{
-	M_ASN1_D2I_vars(a,ASN1_HEADER *,ASN1_HEADER_new);
-
-	M_ASN1_D2I_Init();
-        M_ASN1_D2I_start_sequence();
-        M_ASN1_D2I_get_x(ASN1_OCTET_STRING,ret->header,d2i_ASN1_OCTET_STRING);
-	if (ret->meth != NULL)
-		{
-		M_ASN1_D2I_get_x(void,ret->data,ret->meth->d2i);
-		}
-	else
-		{
-		if (a != NULL) (*a)=ret;
-		return(ret);
-		}
-        M_ASN1_D2I_Finish(a,ASN1_HEADER_free,ASN1_F_D2I_ASN1_HEADER);
-	}
-
-ASN1_HEADER *ASN1_HEADER_new(void)
-	{
-	ASN1_HEADER *ret=NULL;
-	ASN1_CTX c;
-
-	M_ASN1_New_Malloc(ret,ASN1_HEADER);
-	M_ASN1_New(ret->header,M_ASN1_OCTET_STRING_new);
-	ret->meth=NULL;
-	ret->data=NULL;
-	return(ret);
-        M_ASN1_New_Error(ASN1_F_ASN1_HEADER_NEW);
-	}
-
-void ASN1_HEADER_free(ASN1_HEADER *a)
-	{
-	if (a == NULL) return;
-	M_ASN1_OCTET_STRING_free(a->header);
-	if (a->meth != NULL)
-		a->meth->destroy(a->data);
-	OPENSSL_free(a);
-	}
diff --git a/crypto/openssl/crypto/asn1/a_i2d_fp.c b/crypto/openssl/crypto/asn1/a_i2d_fp.c
deleted file mode 100644
index a3ad76d35687..000000000000
--- a/crypto/openssl/crypto/asn1/a_i2d_fp.c
+++ /dev/null
@@ -1,163 +0,0 @@
-/* crypto/asn1/a_i2d_fp.c */
-/* Copyright (C) 1995-1998 Eric Young (eay@cryptsoft.com)
- * All rights reserved.
- *
- * This package is an SSL implementation written
- * by Eric Young (eay@cryptsoft.com).
- * The implementation was written so as to conform with Netscapes SSL.
- * 
- * This library is free for commercial and non-commercial use as long as
- * the following conditions are aheared to.  The following conditions
- * apply to all code found in this distribution, be it the RC4, RSA,
- * lhash, DES, etc., code; not just the SSL code.  The SSL documentation
- * included with this distribution is covered by the same copyright terms
- * except that the holder is Tim Hudson (tjh@cryptsoft.com).
- * 
- * Copyright remains Eric Young's, and as such any Copyright notices in
- * the code are not to be removed.
- * If this package is used in a product, Eric Young should be given attribution
- * as the author of the parts of the library used.
- * This can be in the form of a textual message at program startup or
- * in documentation (online or textual) provided with the package.
- * 
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions
- * are met:
- * 1. Redistributions of source code must retain the copyright
- *    notice, this list of conditions and the following disclaimer.
- * 2. Redistributions in binary form must reproduce the above copyright
- *    notice, this list of conditions and the following disclaimer in the
- *    documentation and/or other materials provided with the distribution.
- * 3. All advertising materials mentioning features or use of this software
- *    must display the following acknowledgement:
- *    "This product includes cryptographic software written by
- *     Eric Young (eay@cryptsoft.com)"
- *    The word 'cryptographic' can be left out if the rouines from the library
- *    being used are not cryptographic related :-).
- * 4. If you include any Windows specific code (or a derivative thereof) from 
- *    the apps directory (application code) you must include an acknowledgement:
- *    "This product includes software written by Tim Hudson (tjh@cryptsoft.com)"
- * 
- * THIS SOFTWARE IS PROVIDED BY ERIC YOUNG ``AS IS'' AND
- * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
- * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
- * ARE DISCLAIMED.  IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE
- * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
- * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
- * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
- * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
- * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
- * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
- * SUCH DAMAGE.
- * 
- * The licence and distribution terms for any publically available version or
- * derivative of this code cannot be changed.  i.e. this code cannot simply be
- * copied and put under another distribution licence
- * [including the GNU Public Licence.]
- */
-
-#include <stdio.h>
-#include "cryptlib.h"
-#include <openssl/buffer.h>
-#include <openssl/asn1.h>
-
-#ifndef NO_OLD_ASN1
-
-#ifndef OPENSSL_NO_FP_API
-int ASN1_i2d_fp(i2d_of_void *i2d, FILE *out, void *x)
-        {
-        BIO *b;
-        int ret;
-
-        if ((b=BIO_new(BIO_s_file())) == NULL)
-		{
-		ASN1err(ASN1_F_ASN1_I2D_FP,ERR_R_BUF_LIB);
-                return(0);
-		}
-        BIO_set_fp(b,out,BIO_NOCLOSE);
-        ret=ASN1_i2d_bio(i2d,b,x);
-        BIO_free(b);
-        return(ret);
-        }
-#endif
-
-int ASN1_i2d_bio(i2d_of_void *i2d, BIO *out, unsigned char *x)
-	{
-	char *b;
-	unsigned char *p;
-	int i,j=0,n,ret=1;
-
-	n=i2d(x,NULL);
-	b=(char *)OPENSSL_malloc(n);
-	if (b == NULL)
-		{
-		ASN1err(ASN1_F_ASN1_I2D_BIO,ERR_R_MALLOC_FAILURE);
-		return(0);
-		}
-
-	p=(unsigned char *)b;
-	i2d(x,&p);
-	
-	for (;;)
-		{
-		i=BIO_write(out,&(b[j]),n);
-		if (i == n) break;
-		if (i <= 0)
-			{
-			ret=0;
-			break;
-			}
-		j+=i;
-		n-=i;
-		}
-	OPENSSL_free(b);
-	return(ret);
-	}
-
-#endif
-
-#ifndef OPENSSL_NO_FP_API
-int ASN1_item_i2d_fp(const ASN1_ITEM *it, FILE *out, void *x)
-        {
-        BIO *b;
-        int ret;
-
-        if ((b=BIO_new(BIO_s_file())) == NULL)
-		{
-		ASN1err(ASN1_F_ASN1_ITEM_I2D_FP,ERR_R_BUF_LIB);
-                return(0);
-		}
-        BIO_set_fp(b,out,BIO_NOCLOSE);
-        ret=ASN1_item_i2d_bio(it,b,x);
-        BIO_free(b);
-        return(ret);
-        }
-#endif
-
-int ASN1_item_i2d_bio(const ASN1_ITEM *it, BIO *out, void *x)
-	{
-	unsigned char *b = NULL;
-	int i,j=0,n,ret=1;
-
-	n = ASN1_item_i2d(x, &b, it);
-	if (b == NULL)
-		{
-		ASN1err(ASN1_F_ASN1_ITEM_I2D_BIO,ERR_R_MALLOC_FAILURE);
-		return(0);
-		}
-
-	for (;;)
-		{
-		i=BIO_write(out,&(b[j]),n);
-		if (i == n) break;
-		if (i <= 0)
-			{
-			ret=0;
-			break;
-			}
-		j+=i;
-		n-=i;
-		}
-	OPENSSL_free(b);
-	return(ret);
-	}
diff --git a/crypto/openssl/crypto/asn1/a_int.c b/crypto/openssl/crypto/asn1/a_int.c
deleted file mode 100644
index f8d198efb160..000000000000
--- a/crypto/openssl/crypto/asn1/a_int.c
+++ /dev/null
@@ -1,459 +0,0 @@
-/* crypto/asn1/a_int.c */
-/* Copyright (C) 1995-1998 Eric Young (eay@cryptsoft.com)
- * All rights reserved.
- *
- * This package is an SSL implementation written
- * by Eric Young (eay@cryptsoft.com).
- * The implementation was written so as to conform with Netscapes SSL.
- * 
- * This library is free for commercial and non-commercial use as long as
- * the following conditions are aheared to.  The following conditions
- * apply to all code found in this distribution, be it the RC4, RSA,
- * lhash, DES, etc., code; not just the SSL code.  The SSL documentation
- * included with this distribution is covered by the same copyright terms
- * except that the holder is Tim Hudson (tjh@cryptsoft.com).
- * 
- * Copyright remains Eric Young's, and as such any Copyright notices in
- * the code are not to be removed.
- * If this package is used in a product, Eric Young should be given attribution
- * as the author of the parts of the library used.
- * This can be in the form of a textual message at program startup or
- * in documentation (online or textual) provided with the package.
- * 
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions
- * are met:
- * 1. Redistributions of source code must retain the copyright
- *    notice, this list of conditions and the following disclaimer.
- * 2. Redistributions in binary form must reproduce the above copyright
- *    notice, this list of conditions and the following disclaimer in the
- *    documentation and/or other materials provided with the distribution.
- * 3. All advertising materials mentioning features or use of this software
- *    must display the following acknowledgement:
- *    "This product includes cryptographic software written by
- *     Eric Young (eay@cryptsoft.com)"
- *    The word 'cryptographic' can be left out if the rouines from the library
- *    being used are not cryptographic related :-).
- * 4. If you include any Windows specific code (or a derivative thereof) from 
- *    the apps directory (application code) you must include an acknowledgement:
- *    "This product includes software written by Tim Hudson (tjh@cryptsoft.com)"
- * 
- * THIS SOFTWARE IS PROVIDED BY ERIC YOUNG ``AS IS'' AND
- * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
- * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
- * ARE DISCLAIMED.  IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE
- * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
- * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
- * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
- * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
- * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
- * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
- * SUCH DAMAGE.
- * 
- * The licence and distribution terms for any publically available version or
- * derivative of this code cannot be changed.  i.e. this code cannot simply be
- * copied and put under another distribution licence
- * [including the GNU Public Licence.]
- */
-
-#include <stdio.h>
-#include "cryptlib.h"
-#include <openssl/asn1.h>
-#include <openssl/bn.h>
-
-ASN1_INTEGER *ASN1_INTEGER_dup(ASN1_INTEGER *x)
-{ return M_ASN1_INTEGER_dup(x);}
-
-int ASN1_INTEGER_cmp(ASN1_INTEGER *x, ASN1_INTEGER *y)
-	{ 
-	int neg, ret;
-	/* Compare signs */
-	neg = x->type & V_ASN1_NEG;
-	if (neg != (y->type & V_ASN1_NEG))
-		{
-		if (neg)
-			return -1;
-		else
-			return 1;
-		}
-
-	ret = ASN1_STRING_cmp(x, y);
-
-	if (neg)
-		return -ret;
-	else
-		return ret;
-	}
-	
-
-/* 
- * This converts an ASN1 INTEGER into its content encoding.
- * The internal representation is an ASN1_STRING whose data is a big endian
- * representation of the value, ignoring the sign. The sign is determined by
- * the type: V_ASN1_INTEGER for positive and V_ASN1_NEG_INTEGER for negative. 
- *
- * Positive integers are no problem: they are almost the same as the DER
- * encoding, except if the first byte is >= 0x80 we need to add a zero pad.
- *
- * Negative integers are a bit trickier...
- * The DER representation of negative integers is in 2s complement form.
- * The internal form is converted by complementing each octet and finally 
- * adding one to the result. This can be done less messily with a little trick.
- * If the internal form has trailing zeroes then they will become FF by the
- * complement and 0 by the add one (due to carry) so just copy as many trailing 
- * zeros to the destination as there are in the source. The carry will add one
- * to the last none zero octet: so complement this octet and add one and finally
- * complement any left over until you get to the start of the string.
- *
- * Padding is a little trickier too. If the first bytes is > 0x80 then we pad
- * with 0xff. However if the first byte is 0x80 and one of the following bytes
- * is non-zero we pad with 0xff. The reason for this distinction is that 0x80
- * followed by optional zeros isn't padded.
- */
-
-int i2c_ASN1_INTEGER(ASN1_INTEGER *a, unsigned char **pp)
-	{
-	int pad=0,ret,i,neg;
-	unsigned char *p,*n,pb=0;
-
-	if ((a == NULL) || (a->data == NULL)) return(0);
-	neg=a->type & V_ASN1_NEG;
-	if (a->length == 0)
-		ret=1;
-	else
-		{
-		ret=a->length;
-		i=a->data[0];
-		if (!neg && (i > 127)) {
-			pad=1;
-			pb=0;
-		} else if(neg) {
-			if(i>128) {
-				pad=1;
-				pb=0xFF;
-			} else if(i == 128) {
-			/*
-			 * Special case: if any other bytes non zero we pad:
-			 * otherwise we don't.
-			 */
-				for(i = 1; i < a->length; i++) if(a->data[i]) {
-						pad=1;
-						pb=0xFF;
-						break;
-				}
-			}
-		}
-		ret+=pad;
-		}
-	if (pp == NULL) return(ret);
-	p= *pp;
-
-	if (pad) *(p++)=pb;
-	if (a->length == 0) *(p++)=0;
-	else if (!neg) memcpy(p,a->data,(unsigned int)a->length);
-	else {
-		/* Begin at the end of the encoding */
-		n=a->data + a->length - 1;
-		p += a->length - 1;
-		i = a->length;
-		/* Copy zeros to destination as long as source is zero */
-		while(!*n) {
-			*(p--) = 0;
-			n--;
-			i--;
-		}
-		/* Complement and increment next octet */
-		*(p--) = ((*(n--)) ^ 0xff) + 1;
-		i--;
-		/* Complement any octets left */
-		for(;i > 0; i--) *(p--) = *(n--) ^ 0xff;
-	}
-
-	*pp+=ret;
-	return(ret);
-	}
-
-/* Convert just ASN1 INTEGER content octets to ASN1_INTEGER structure */
-
-ASN1_INTEGER *c2i_ASN1_INTEGER(ASN1_INTEGER **a, const unsigned char **pp,
-	     long len)
-	{
-	ASN1_INTEGER *ret=NULL;
-	const unsigned char *p, *pend;
-	unsigned char *to,*s;
-	int i;
-
-	if ((a == NULL) || ((*a) == NULL))
-		{
-		if ((ret=M_ASN1_INTEGER_new()) == NULL) return(NULL);
-		ret->type=V_ASN1_INTEGER;
-		}
-	else
-		ret=(*a);
-
-	p= *pp;
-	pend = p + len;
-
-	/* We must OPENSSL_malloc stuff, even for 0 bytes otherwise it
-	 * signifies a missing NULL parameter. */
-	s=(unsigned char *)OPENSSL_malloc((int)len+1);
-	if (s == NULL)
-		{
-		i=ERR_R_MALLOC_FAILURE;
-		goto err;
-		}
-	to=s;
-	if(!len) {
-		/* Strictly speaking this is an illegal INTEGER but we
-		 * tolerate it.
-		 */
-		ret->type=V_ASN1_INTEGER;
-	} else if (*p & 0x80) /* a negative number */
-		{
-		ret->type=V_ASN1_NEG_INTEGER;
-		if ((*p == 0xff) && (len != 1)) {
-			p++;
-			len--;
-		}
-		i = len;
-		p += i - 1;
-		to += i - 1;
-		while((!*p) && i) {
-			*(to--) = 0;
-			i--;
-			p--;
-		}
-		/* Special case: if all zeros then the number will be of
-		 * the form FF followed by n zero bytes: this corresponds to
-		 * 1 followed by n zero bytes. We've already written n zeros
-		 * so we just append an extra one and set the first byte to
-		 * a 1. This is treated separately because it is the only case
-		 * where the number of bytes is larger than len.
-		 */
-		if(!i) {
-			*s = 1;
-			s[len] = 0;
-			len++;
-		} else {
-			*(to--) = (*(p--) ^ 0xff) + 1;
-			i--;
-			for(;i > 0; i--) *(to--) = *(p--) ^ 0xff;
-		}
-	} else {
-		ret->type=V_ASN1_INTEGER;
-		if ((*p == 0) && (len != 1))
-			{
-			p++;
-			len--;
-			}
-		memcpy(s,p,(int)len);
-	}
-
-	if (ret->data != NULL) OPENSSL_free(ret->data);
-	ret->data=s;
-	ret->length=(int)len;
-	if (a != NULL) (*a)=ret;
-	*pp=pend;
-	return(ret);
-err:
-	ASN1err(ASN1_F_C2I_ASN1_INTEGER,i);
-	if ((ret != NULL) && ((a == NULL) || (*a != ret)))
-		M_ASN1_INTEGER_free(ret);
-	return(NULL);
-	}
-
-
-/* This is a version of d2i_ASN1_INTEGER that ignores the sign bit of
- * ASN1 integers: some broken software can encode a positive INTEGER
- * with its MSB set as negative (it doesn't add a padding zero).
- */
-
-ASN1_INTEGER *d2i_ASN1_UINTEGER(ASN1_INTEGER **a, const unsigned char **pp,
-	     long length)
-	{
-	ASN1_INTEGER *ret=NULL;
-	const unsigned char *p;
-	unsigned char *to,*s;
-	long len;
-	int inf,tag,xclass;
-	int i;
-
-	if ((a == NULL) || ((*a) == NULL))
-		{
-		if ((ret=M_ASN1_INTEGER_new()) == NULL) return(NULL);
-		ret->type=V_ASN1_INTEGER;
-		}
-	else
-		ret=(*a);
-
-	p= *pp;
-	inf=ASN1_get_object(&p,&len,&tag,&xclass,length);
-	if (inf & 0x80)
-		{
-		i=ASN1_R_BAD_OBJECT_HEADER;
-		goto err;
-		}
-
-	if (tag != V_ASN1_INTEGER)
-		{
-		i=ASN1_R_EXPECTING_AN_INTEGER;
-		goto err;
-		}
-
-	/* We must OPENSSL_malloc stuff, even for 0 bytes otherwise it
-	 * signifies a missing NULL parameter. */
-	s=(unsigned char *)OPENSSL_malloc((int)len+1);
-	if (s == NULL)
-		{
-		i=ERR_R_MALLOC_FAILURE;
-		goto err;
-		}
-	to=s;
-	ret->type=V_ASN1_INTEGER;
-	if(len) {
-		if ((*p == 0) && (len != 1))
-			{
-			p++;
-			len--;
-			}
-		memcpy(s,p,(int)len);
-		p+=len;
-	}
-
-	if (ret->data != NULL) OPENSSL_free(ret->data);
-	ret->data=s;
-	ret->length=(int)len;
-	if (a != NULL) (*a)=ret;
-	*pp=p;
-	return(ret);
-err:
-	ASN1err(ASN1_F_D2I_ASN1_UINTEGER,i);
-	if ((ret != NULL) && ((a == NULL) || (*a != ret)))
-		M_ASN1_INTEGER_free(ret);
-	return(NULL);
-	}
-
-int ASN1_INTEGER_set(ASN1_INTEGER *a, long v)
-	{
-	int j,k;
-	unsigned int i;
-	unsigned char buf[sizeof(long)+1];
-	long d;
-
-	a->type=V_ASN1_INTEGER;
-	if (a->length < (int)(sizeof(long)+1))
-		{
-		if (a->data != NULL)
-			OPENSSL_free(a->data);
-		if ((a->data=(unsigned char *)OPENSSL_malloc(sizeof(long)+1)) != NULL)
-			memset((char *)a->data,0,sizeof(long)+1);
-		}
-	if (a->data == NULL)
-		{
-		ASN1err(ASN1_F_ASN1_INTEGER_SET,ERR_R_MALLOC_FAILURE);
-		return(0);
-		}
-	d=v;
-	if (d < 0)
-		{
-		d= -d;
-		a->type=V_ASN1_NEG_INTEGER;
-		}
-
-	for (i=0; i<sizeof(long); i++)
-		{
-		if (d == 0) break;
-		buf[i]=(int)d&0xff;
-		d>>=8;
-		}
-	j=0;
-	for (k=i-1; k >=0; k--)
-		a->data[j++]=buf[k];
-	a->length=j;
-	return(1);
-	}
-
-long ASN1_INTEGER_get(ASN1_INTEGER *a)
-	{
-	int neg=0,i;
-	long r=0;
-
-	if (a == NULL) return(0L);
-	i=a->type;
-	if (i == V_ASN1_NEG_INTEGER)
-		neg=1;
-	else if (i != V_ASN1_INTEGER)
-		return -1;
-	
-	if (a->length > (int)sizeof(long))
-		{
-		/* hmm... a bit ugly */
-		return(0xffffffffL);
-		}
-	if (a->data == NULL)
-		return 0;
-
-	for (i=0; i<a->length; i++)
-		{
-		r<<=8;
-		r|=(unsigned char)a->data[i];
-		}
-	if (neg) r= -r;
-	return(r);
-	}
-
-ASN1_INTEGER *BN_to_ASN1_INTEGER(BIGNUM *bn, ASN1_INTEGER *ai)
-	{
-	ASN1_INTEGER *ret;
-	int len,j;
-
-	if (ai == NULL)
-		ret=M_ASN1_INTEGER_new();
-	else
-		ret=ai;
-	if (ret == NULL)
-		{
-		ASN1err(ASN1_F_BN_TO_ASN1_INTEGER,ERR_R_NESTED_ASN1_ERROR);
-		goto err;
-		}
-	if (BN_is_negative(bn))
-		ret->type = V_ASN1_NEG_INTEGER;
-	else ret->type=V_ASN1_INTEGER;
-	j=BN_num_bits(bn);
-	len=((j == 0)?0:((j/8)+1));
-	if (ret->length < len+4)
-		{
-		unsigned char *new_data=OPENSSL_realloc(ret->data, len+4);
-		if (!new_data)
-			{
-			ASN1err(ASN1_F_BN_TO_ASN1_INTEGER,ERR_R_MALLOC_FAILURE);
-			goto err;
-			}
-		ret->data=new_data;
-		}
-	ret->length=BN_bn2bin(bn,ret->data);
-	/* Correct zero case */
-	if(!ret->length)
-		{
-		ret->data[0] = 0;
-		ret->length = 1;
-		}
-	return(ret);
-err:
-	if (ret != ai) M_ASN1_INTEGER_free(ret);
-	return(NULL);
-	}
-
-BIGNUM *ASN1_INTEGER_to_BN(ASN1_INTEGER *ai, BIGNUM *bn)
-	{
-	BIGNUM *ret;
-
-	if ((ret=BN_bin2bn(ai->data,ai->length,bn)) == NULL)
-		ASN1err(ASN1_F_ASN1_INTEGER_TO_BN,ASN1_R_BN_LIB);
-	else if(ai->type == V_ASN1_NEG_INTEGER)
-		BN_set_negative(ret, 1);
-	return(ret);
-	}
-
-IMPLEMENT_STACK_OF(ASN1_INTEGER)
-IMPLEMENT_ASN1_SET_OF(ASN1_INTEGER)
diff --git a/crypto/openssl/crypto/asn1/a_mbstr.c b/crypto/openssl/crypto/asn1/a_mbstr.c
deleted file mode 100644
index 2d4800a22a4c..000000000000
--- a/crypto/openssl/crypto/asn1/a_mbstr.c
+++ /dev/null
@@ -1,400 +0,0 @@
-/* a_mbstr.c */
-/* Written by Dr Stephen N Henson (shenson@bigfoot.com) for the OpenSSL
- * project 1999.
- */
-/* ====================================================================
- * Copyright (c) 1999 The OpenSSL Project.  All rights reserved.
- *
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions
- * are met:
- *
- * 1. Redistributions of source code must retain the above copyright
- *    notice, this list of conditions and the following disclaimer. 
- *
- * 2. Redistributions in binary form must reproduce the above copyright
- *    notice, this list of conditions and the following disclaimer in
- *    the documentation and/or other materials provided with the
- *    distribution.
- *
- * 3. All advertising materials mentioning features or use of this
- *    software must display the following acknowledgment:
- *    "This product includes software developed by the OpenSSL Project
- *    for use in the OpenSSL Toolkit. (http://www.OpenSSL.org/)"
- *
- * 4. The names "OpenSSL Toolkit" and "OpenSSL Project" must not be used to
- *    endorse or promote products derived from this software without
- *    prior written permission. For written permission, please contact
- *    licensing@OpenSSL.org.
- *
- * 5. Products derived from this software may not be called "OpenSSL"
- *    nor may "OpenSSL" appear in their names without prior written
- *    permission of the OpenSSL Project.
- *
- * 6. Redistributions of any form whatsoever must retain the following
- *    acknowledgment:
- *    "This product includes software developed by the OpenSSL Project
- *    for use in the OpenSSL Toolkit (http://www.OpenSSL.org/)"
- *
- * THIS SOFTWARE IS PROVIDED BY THE OpenSSL PROJECT ``AS IS'' AND ANY
- * EXPRESSED OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
- * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR
- * PURPOSE ARE DISCLAIMED.  IN NO EVENT SHALL THE OpenSSL PROJECT OR
- * ITS CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
- * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
- * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
- * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
- * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
- * STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
- * ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED
- * OF THE POSSIBILITY OF SUCH DAMAGE.
- * ====================================================================
- *
- * This product includes cryptographic software written by Eric Young
- * (eay@cryptsoft.com).  This product includes software written by Tim
- * Hudson (tjh@cryptsoft.com).
- *
- */
-
-#include <stdio.h>
-#include <ctype.h>
-#include "cryptlib.h"
-#include <openssl/asn1.h>
-
-static int traverse_string(const unsigned char *p, int len, int inform,
-		 int (*rfunc)(unsigned long value, void *in), void *arg);
-static int in_utf8(unsigned long value, void *arg);
-static int out_utf8(unsigned long value, void *arg);
-static int type_str(unsigned long value, void *arg);
-static int cpy_asc(unsigned long value, void *arg);
-static int cpy_bmp(unsigned long value, void *arg);
-static int cpy_univ(unsigned long value, void *arg);
-static int cpy_utf8(unsigned long value, void *arg);
-static int is_printable(unsigned long value);
-
-/* These functions take a string in UTF8, ASCII or multibyte form and
- * a mask of permissible ASN1 string types. It then works out the minimal
- * type (using the order Printable < IA5 < T61 < BMP < Universal < UTF8)
- * and creates a string of the correct type with the supplied data.
- * Yes this is horrible: it has to be :-(
- * The 'ncopy' form checks minimum and maximum size limits too.
- */
-
-int ASN1_mbstring_copy(ASN1_STRING **out, const unsigned char *in, int len,
-					int inform, unsigned long mask)
-{
-	return ASN1_mbstring_ncopy(out, in, len, inform, mask, 0, 0);
-}
-
-int ASN1_mbstring_ncopy(ASN1_STRING **out, const unsigned char *in, int len,
-					int inform, unsigned long mask, 
-					long minsize, long maxsize)
-{
-	int str_type;
-	int ret;
-	char free_out;
-	int outform, outlen;
-	ASN1_STRING *dest;
-	unsigned char *p;
-	int nchar;
-	char strbuf[32];
-	int (*cpyfunc)(unsigned long,void *) = NULL;
-	if(len == -1) len = strlen((const char *)in);
-	if(!mask) mask = DIRSTRING_TYPE;
-
-	/* First do a string check and work out the number of characters */
-	switch(inform) {
-
-		case MBSTRING_BMP:
-		if(len & 1) {
-			ASN1err(ASN1_F_ASN1_MBSTRING_NCOPY,
-					 ASN1_R_INVALID_BMPSTRING_LENGTH);
-			return -1;
-		}
-		nchar = len >> 1;
-		break;
-
-		case MBSTRING_UNIV:
-		if(len & 3) {
-			ASN1err(ASN1_F_ASN1_MBSTRING_NCOPY,
-					 ASN1_R_INVALID_UNIVERSALSTRING_LENGTH);
-			return -1;
-		}
-		nchar = len >> 2;
-		break;
-
-		case MBSTRING_UTF8:
-		nchar = 0;
-		/* This counts the characters and does utf8 syntax checking */
-		ret = traverse_string(in, len, MBSTRING_UTF8, in_utf8, &nchar);
-		if(ret < 0) {
-			ASN1err(ASN1_F_ASN1_MBSTRING_NCOPY,
-						 ASN1_R_INVALID_UTF8STRING);
-			return -1;
-		}
-		break;
-
-		case MBSTRING_ASC:
-		nchar = len;
-		break;
-
-		default:
-		ASN1err(ASN1_F_ASN1_MBSTRING_NCOPY, ASN1_R_UNKNOWN_FORMAT);
-		return -1;
-	}
-
-	if((minsize > 0) && (nchar < minsize)) {
-		ASN1err(ASN1_F_ASN1_MBSTRING_NCOPY, ASN1_R_STRING_TOO_SHORT);
-		BIO_snprintf(strbuf, sizeof strbuf, "%ld", minsize);
-		ERR_add_error_data(2, "minsize=", strbuf);
-		return -1;
-	}
-
-	if((maxsize > 0) && (nchar > maxsize)) {
-		ASN1err(ASN1_F_ASN1_MBSTRING_NCOPY, ASN1_R_STRING_TOO_LONG);
-		BIO_snprintf(strbuf, sizeof strbuf, "%ld", maxsize);
-		ERR_add_error_data(2, "maxsize=", strbuf);
-		return -1;
-	}
-
-	/* Now work out minimal type (if any) */
-	if(traverse_string(in, len, inform, type_str, &mask) < 0) {
-		ASN1err(ASN1_F_ASN1_MBSTRING_NCOPY, ASN1_R_ILLEGAL_CHARACTERS);
-		return -1;
-	}
-
-
-	/* Now work out output format and string type */
-	outform = MBSTRING_ASC;
-	if(mask & B_ASN1_PRINTABLESTRING) str_type = V_ASN1_PRINTABLESTRING;
-	else if(mask & B_ASN1_IA5STRING) str_type = V_ASN1_IA5STRING;
-	else if(mask & B_ASN1_T61STRING) str_type = V_ASN1_T61STRING;
-	else if(mask & B_ASN1_BMPSTRING) {
-		str_type = V_ASN1_BMPSTRING;
-		outform = MBSTRING_BMP;
-	} else if(mask & B_ASN1_UNIVERSALSTRING) {
-		str_type = V_ASN1_UNIVERSALSTRING;
-		outform = MBSTRING_UNIV;
-	} else {
-		str_type = V_ASN1_UTF8STRING;
-		outform = MBSTRING_UTF8;
-	}
-	if(!out) return str_type;
-	if(*out) {
-		free_out = 0;
-		dest = *out;
-		if(dest->data) {
-			dest->length = 0;
-			OPENSSL_free(dest->data);
-			dest->data = NULL;
-		}
-		dest->type = str_type;
-	} else {
-		free_out = 1;
-		dest = ASN1_STRING_type_new(str_type);
-		if(!dest) {
-			ASN1err(ASN1_F_ASN1_MBSTRING_NCOPY,
-							ERR_R_MALLOC_FAILURE);
-			return -1;
-		}
-		*out = dest;
-	}
-	/* If both the same type just copy across */
-	if(inform == outform) {
-		if(!ASN1_STRING_set(dest, in, len)) {
-			ASN1err(ASN1_F_ASN1_MBSTRING_NCOPY,ERR_R_MALLOC_FAILURE);
-			return -1;
-		}
-		return str_type;
-	} 
-
-	/* Work out how much space the destination will need */
-	switch(outform) {
-		case MBSTRING_ASC:
-		outlen = nchar;
-		cpyfunc = cpy_asc;
-		break;
-
-		case MBSTRING_BMP:
-		outlen = nchar << 1;
-		cpyfunc = cpy_bmp;
-		break;
-
-		case MBSTRING_UNIV:
-		outlen = nchar << 2;
-		cpyfunc = cpy_univ;
-		break;
-
-		case MBSTRING_UTF8:
-		outlen = 0;
-		traverse_string(in, len, inform, out_utf8, &outlen);
-		cpyfunc = cpy_utf8;
-		break;
-	}
-	if(!(p = OPENSSL_malloc(outlen + 1))) {
-		if(free_out) ASN1_STRING_free(dest);
-		ASN1err(ASN1_F_ASN1_MBSTRING_NCOPY,ERR_R_MALLOC_FAILURE);
-		return -1;
-	}
-	dest->length = outlen;
-	dest->data = p;
-	p[outlen] = 0;
-	traverse_string(in, len, inform, cpyfunc, &p);
-	return str_type;	
-}
-
-/* This function traverses a string and passes the value of each character
- * to an optional function along with a void * argument.
- */
-
-static int traverse_string(const unsigned char *p, int len, int inform,
-		 int (*rfunc)(unsigned long value, void *in), void *arg)
-{
-	unsigned long value;
-	int ret;
-	while(len) {
-		if(inform == MBSTRING_ASC) {
-			value = *p++;
-			len--;
-		} else if(inform == MBSTRING_BMP) {
-			value = *p++ << 8;
-			value |= *p++;
-			len -= 2;
-		} else if(inform == MBSTRING_UNIV) {
-			value = ((unsigned long)*p++) << 24;
-			value |= ((unsigned long)*p++) << 16;
-			value |= *p++ << 8;
-			value |= *p++;
-			len -= 4;
-		} else {
-			ret = UTF8_getc(p, len, &value);
-			if(ret < 0) return -1;
-			len -= ret;
-			p += ret;
-		}
-		if(rfunc) {
-			ret = rfunc(value, arg);
-			if(ret <= 0) return ret;
-		}
-	}
-	return 1;
-}
-
-/* Various utility functions for traverse_string */
-
-/* Just count number of characters */
-
-static int in_utf8(unsigned long value, void *arg)
-{
-	int *nchar;
-	nchar = arg;
-	(*nchar)++;
-	return 1;
-}
-
-/* Determine size of output as a UTF8 String */
-
-static int out_utf8(unsigned long value, void *arg)
-{
-	int *outlen;
-	outlen = arg;
-	*outlen += UTF8_putc(NULL, -1, value);
-	return 1;
-}
-
-/* Determine the "type" of a string: check each character against a
- * supplied "mask".
- */
-
-static int type_str(unsigned long value, void *arg)
-{
-	unsigned long types;
-	types = *((unsigned long *)arg);
-	if((types & B_ASN1_PRINTABLESTRING) && !is_printable(value))
-					types &= ~B_ASN1_PRINTABLESTRING;
-	if((types & B_ASN1_IA5STRING) && (value > 127))
-					types &= ~B_ASN1_IA5STRING;
-	if((types & B_ASN1_T61STRING) && (value > 0xff))
-					types &= ~B_ASN1_T61STRING;
-	if((types & B_ASN1_BMPSTRING) && (value > 0xffff))
-					types &= ~B_ASN1_BMPSTRING;
-	if(!types) return -1;
-	*((unsigned long *)arg) = types;
-	return 1;
-}
-
-/* Copy one byte per character ASCII like strings */
-
-static int cpy_asc(unsigned long value, void *arg)
-{
-	unsigned char **p, *q;
-	p = arg;
-	q = *p;
-	*q = (unsigned char) value;
-	(*p)++;
-	return 1;
-}
-
-/* Copy two byte per character BMPStrings */
-
-static int cpy_bmp(unsigned long value, void *arg)
-{
-	unsigned char **p, *q;
-	p = arg;
-	q = *p;
-	*q++ = (unsigned char) ((value >> 8) & 0xff);
-	*q = (unsigned char) (value & 0xff);
-	*p += 2;
-	return 1;
-}
-
-/* Copy four byte per character UniversalStrings */
-
-static int cpy_univ(unsigned long value, void *arg)
-{
-	unsigned char **p, *q;
-	p = arg;
-	q = *p;
-	*q++ = (unsigned char) ((value >> 24) & 0xff);
-	*q++ = (unsigned char) ((value >> 16) & 0xff);
-	*q++ = (unsigned char) ((value >> 8) & 0xff);
-	*q = (unsigned char) (value & 0xff);
-	*p += 4;
-	return 1;
-}
-
-/* Copy to a UTF8String */
-
-static int cpy_utf8(unsigned long value, void *arg)
-{
-	unsigned char **p;
-	int ret;
-	p = arg;
-	/* We already know there is enough room so pass 0xff as the length */
-	ret = UTF8_putc(*p, 0xff, value);
-	*p += ret;
-	return 1;
-}
-
-/* Return 1 if the character is permitted in a PrintableString */
-static int is_printable(unsigned long value)
-{
-	int ch;
-	if(value > 0x7f) return 0;
-	ch = (int) value;
-	/* Note: we can't use 'isalnum' because certain accented 
-	 * characters may count as alphanumeric in some environments.
-	 */
-#ifndef CHARSET_EBCDIC
-	if((ch >= 'a') && (ch <= 'z')) return 1;
-	if((ch >= 'A') && (ch <= 'Z')) return 1;
-	if((ch >= '0') && (ch <= '9')) return 1;
-	if ((ch == ' ') || strchr("'()+,-./:=?", ch)) return 1;
-#else /*CHARSET_EBCDIC*/
-	if((ch >= os_toascii['a']) && (ch <= os_toascii['z'])) return 1;
-	if((ch >= os_toascii['A']) && (ch <= os_toascii['Z'])) return 1;
-	if((ch >= os_toascii['0']) && (ch <= os_toascii['9'])) return 1;
-	if ((ch == os_toascii[' ']) || strchr("'()+,-./:=?", os_toebcdic[ch])) return 1;
-#endif /*CHARSET_EBCDIC*/
-	return 0;
-}
diff --git a/crypto/openssl/crypto/asn1/a_meth.c b/crypto/openssl/crypto/asn1/a_meth.c
deleted file mode 100644
index 50bea917e38b..000000000000
--- a/crypto/openssl/crypto/asn1/a_meth.c
+++ /dev/null
@@ -1,84 +0,0 @@
-/* crypto/asn1/a_meth.c */
-/* Copyright (C) 1995-1998 Eric Young (eay@cryptsoft.com)
- * All rights reserved.
- *
- * This package is an SSL implementation written
- * by Eric Young (eay@cryptsoft.com).
- * The implementation was written so as to conform with Netscapes SSL.
- * 
- * This library is free for commercial and non-commercial use as long as
- * the following conditions are aheared to.  The following conditions
- * apply to all code found in this distribution, be it the RC4, RSA,
- * lhash, DES, etc., code; not just the SSL code.  The SSL documentation
- * included with this distribution is covered by the same copyright terms
- * except that the holder is Tim Hudson (tjh@cryptsoft.com).
- * 
- * Copyright remains Eric Young's, and as such any Copyright notices in
- * the code are not to be removed.
- * If this package is used in a product, Eric Young should be given attribution
- * as the author of the parts of the library used.
- * This can be in the form of a textual message at program startup or
- * in documentation (online or textual) provided with the package.
- * 
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions
- * are met:
- * 1. Redistributions of source code must retain the copyright
- *    notice, this list of conditions and the following disclaimer.
- * 2. Redistributions in binary form must reproduce the above copyright
- *    notice, this list of conditions and the following disclaimer in the
- *    documentation and/or other materials provided with the distribution.
- * 3. All advertising materials mentioning features or use of this software
- *    must display the following acknowledgement:
- *    "This product includes cryptographic software written by
- *     Eric Young (eay@cryptsoft.com)"
- *    The word 'cryptographic' can be left out if the rouines from the library
- *    being used are not cryptographic related :-).
- * 4. If you include any Windows specific code (or a derivative thereof) from 
- *    the apps directory (application code) you must include an acknowledgement:
- *    "This product includes software written by Tim Hudson (tjh@cryptsoft.com)"
- * 
- * THIS SOFTWARE IS PROVIDED BY ERIC YOUNG ``AS IS'' AND
- * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
- * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
- * ARE DISCLAIMED.  IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE
- * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
- * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
- * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
- * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
- * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
- * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
- * SUCH DAMAGE.
- * 
- * The licence and distribution terms for any publically available version or
- * derivative of this code cannot be changed.  i.e. this code cannot simply be
- * copied and put under another distribution licence
- * [including the GNU Public Licence.]
- */
-
-#include <stdio.h>
-#include "cryptlib.h"
-#include <openssl/buffer.h>
-#include <openssl/asn1.h>
-
-static  ASN1_METHOD ia5string_meth={
-	(I2D_OF(void))	i2d_ASN1_IA5STRING,
-	(D2I_OF(void))	d2i_ASN1_IA5STRING,
-	(void *(*)(void))ASN1_STRING_new,
-	(void (*)(void *))ASN1_STRING_free};
-
-static  ASN1_METHOD bit_string_meth={
-	(I2D_OF(void))	i2d_ASN1_BIT_STRING,
-	(D2I_OF(void))	d2i_ASN1_BIT_STRING,
-	(void *(*)(void))ASN1_STRING_new,
-	(void (*)(void *))ASN1_STRING_free};
-
-ASN1_METHOD *ASN1_IA5STRING_asn1_meth(void)
-	{
-	return(&ia5string_meth);
-	}
-
-ASN1_METHOD *ASN1_BIT_STRING_asn1_meth(void)
-	{
-	return(&bit_string_meth);
-	}
diff --git a/crypto/openssl/crypto/asn1/a_object.c b/crypto/openssl/crypto/asn1/a_object.c
deleted file mode 100644
index a36356e34474..000000000000
--- a/crypto/openssl/crypto/asn1/a_object.c
+++ /dev/null
@@ -1,385 +0,0 @@
-/* crypto/asn1/a_object.c */
-/* Copyright (C) 1995-1998 Eric Young (eay@cryptsoft.com)
- * All rights reserved.
- *
- * This package is an SSL implementation written
- * by Eric Young (eay@cryptsoft.com).
- * The implementation was written so as to conform with Netscapes SSL.
- * 
- * This library is free for commercial and non-commercial use as long as
- * the following conditions are aheared to.  The following conditions
- * apply to all code found in this distribution, be it the RC4, RSA,
- * lhash, DES, etc., code; not just the SSL code.  The SSL documentation
- * included with this distribution is covered by the same copyright terms
- * except that the holder is Tim Hudson (tjh@cryptsoft.com).
- * 
- * Copyright remains Eric Young's, and as such any Copyright notices in
- * the code are not to be removed.
- * If this package is used in a product, Eric Young should be given attribution
- * as the author of the parts of the library used.
- * This can be in the form of a textual message at program startup or
- * in documentation (online or textual) provided with the package.
- * 
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions
- * are met:
- * 1. Redistributions of source code must retain the copyright
- *    notice, this list of conditions and the following disclaimer.
- * 2. Redistributions in binary form must reproduce the above copyright
- *    notice, this list of conditions and the following disclaimer in the
- *    documentation and/or other materials provided with the distribution.
- * 3. All advertising materials mentioning features or use of this software
- *    must display the following acknowledgement:
- *    "This product includes cryptographic software written by
- *     Eric Young (eay@cryptsoft.com)"
- *    The word 'cryptographic' can be left out if the rouines from the library
- *    being used are not cryptographic related :-).
- * 4. If you include any Windows specific code (or a derivative thereof) from 
- *    the apps directory (application code) you must include an acknowledgement:
- *    "This product includes software written by Tim Hudson (tjh@cryptsoft.com)"
- * 
- * THIS SOFTWARE IS PROVIDED BY ERIC YOUNG ``AS IS'' AND
- * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
- * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
- * ARE DISCLAIMED.  IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE
- * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
- * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
- * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
- * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
- * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
- * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
- * SUCH DAMAGE.
- * 
- * The licence and distribution terms for any publically available version or
- * derivative of this code cannot be changed.  i.e. this code cannot simply be
- * copied and put under another distribution licence
- * [including the GNU Public Licence.]
- */
-
-#include <stdio.h>
-#include <limits.h>
-#include "cryptlib.h"
-#include <openssl/buffer.h>
-#include <openssl/asn1.h>
-#include <openssl/objects.h>
-
-int i2d_ASN1_OBJECT(ASN1_OBJECT *a, unsigned char **pp)
-	{
-	unsigned char *p;
-	int objsize;
-
-	if ((a == NULL) || (a->data == NULL)) return(0);
-
-	objsize = ASN1_object_size(0,a->length,V_ASN1_OBJECT);
-	if (pp == NULL) return objsize;
-
-	p= *pp;
-	ASN1_put_object(&p,0,a->length,V_ASN1_OBJECT,V_ASN1_UNIVERSAL);
-	memcpy(p,a->data,a->length);
-	p+=a->length;
-
-	*pp=p;
-	return(objsize);
-	}
-
-int a2d_ASN1_OBJECT(unsigned char *out, int olen, const char *buf, int num)
-	{
-	int i,first,len=0,c, use_bn;
-	char ftmp[24], *tmp = ftmp;
-	int tmpsize = sizeof ftmp;
-	const char *p;
-	unsigned long l;
-	BIGNUM *bl = NULL;
-
-	if (num == 0)
-		return(0);
-	else if (num == -1)
-		num=strlen(buf);
-
-	p=buf;
-	c= *(p++);
-	num--;
-	if ((c >= '0') && (c <= '2'))
-		{
-		first= c-'0';
-		}
-	else
-		{
-		ASN1err(ASN1_F_A2D_ASN1_OBJECT,ASN1_R_FIRST_NUM_TOO_LARGE);
-		goto err;
-		}
-
-	if (num <= 0)
-		{
-		ASN1err(ASN1_F_A2D_ASN1_OBJECT,ASN1_R_MISSING_SECOND_NUMBER);
-		goto err;
-		}
-	c= *(p++);
-	num--;
-	for (;;)
-		{
-		if (num <= 0) break;
-		if ((c != '.') && (c != ' '))
-			{
-			ASN1err(ASN1_F_A2D_ASN1_OBJECT,ASN1_R_INVALID_SEPARATOR);
-			goto err;
-			}
-		l=0;
-		use_bn = 0;
-		for (;;)
-			{
-			if (num <= 0) break;
-			num--;
-			c= *(p++);
-			if ((c == ' ') || (c == '.'))
-				break;
-			if ((c < '0') || (c > '9'))
-				{
-				ASN1err(ASN1_F_A2D_ASN1_OBJECT,ASN1_R_INVALID_DIGIT);
-				goto err;
-				}
-			if (!use_bn && l > (ULONG_MAX / 10L))
-				{
-				use_bn = 1;
-				if (!bl)
-					bl = BN_new();
-				if (!bl || !BN_set_word(bl, l))
-					goto err;
-				}
-			if (use_bn)
-				{
-				if (!BN_mul_word(bl, 10L)
-					|| !BN_add_word(bl, c-'0'))
-					goto err;
-				}
-			else
-				l=l*10L+(long)(c-'0');
-			}
-		if (len == 0)
-			{
-			if ((first < 2) && (l >= 40))
-				{
-				ASN1err(ASN1_F_A2D_ASN1_OBJECT,ASN1_R_SECOND_NUMBER_TOO_LARGE);
-				goto err;
-				}
-			if (use_bn)
-				{
-				if (!BN_add_word(bl, first * 40))
-					goto err;
-				}
-			else
-				l+=(long)first*40;
-			}
-		i=0;
-		if (use_bn)
-			{
-			int blsize;
-			blsize = BN_num_bits(bl);
-			blsize = (blsize + 6)/7;
-			if (blsize > tmpsize)
-				{
-				if (tmp != ftmp)
-					OPENSSL_free(tmp);
-				tmpsize = blsize + 32;
-				tmp = OPENSSL_malloc(tmpsize);
-				if (!tmp)
-					goto err;
-				}
-			while(blsize--)
-				tmp[i++] = (unsigned char)BN_div_word(bl, 0x80L);
-			}
-		else
-			{
-					
-			for (;;)
-				{
-				tmp[i++]=(unsigned char)l&0x7f;
-				l>>=7L;
-				if (l == 0L) break;
-				}
-
-			}
-		if (out != NULL)
-			{
-			if (len+i > olen)
-				{
-				ASN1err(ASN1_F_A2D_ASN1_OBJECT,ASN1_R_BUFFER_TOO_SMALL);
-				goto err;
-				}
-			while (--i > 0)
-				out[len++]=tmp[i]|0x80;
-			out[len++]=tmp[0];
-			}
-		else
-			len+=i;
-		}
-	if (tmp != ftmp)
-		OPENSSL_free(tmp);
-	if (bl)
-		BN_free(bl);
-	return(len);
-err:
-	if (tmp != ftmp)
-		OPENSSL_free(tmp);
-	if (bl)
-		BN_free(bl);
-	return(0);
-	}
-
-int i2t_ASN1_OBJECT(char *buf, int buf_len, ASN1_OBJECT *a)
-{
-	return OBJ_obj2txt(buf, buf_len, a, 0);
-}
-
-int i2a_ASN1_OBJECT(BIO *bp, ASN1_OBJECT *a)
-	{
-	char buf[80], *p = buf;
-	int i;
-
-	if ((a == NULL) || (a->data == NULL))
-		return(BIO_write(bp,"NULL",4));
-	i=i2t_ASN1_OBJECT(buf,sizeof buf,a);
-	if (i > (int)(sizeof(buf) - 1))
-		{
-		p = OPENSSL_malloc(i + 1);
-		if (!p)
-			return -1;
-		i2t_ASN1_OBJECT(p,i + 1,a);
-		}
-	if (i <= 0)
-		return BIO_write(bp, "<INVALID>", 9);
-	BIO_write(bp,p,i);
-	if (p != buf)
-		OPENSSL_free(p);
-	return(i);
-	}
-
-ASN1_OBJECT *d2i_ASN1_OBJECT(ASN1_OBJECT **a, const unsigned char **pp,
-	     long length)
-{
-	const unsigned char *p;
-	long len;
-	int tag,xclass;
-	int inf,i;
-	ASN1_OBJECT *ret = NULL;
-	p= *pp;
-	inf=ASN1_get_object(&p,&len,&tag,&xclass,length);
-	if (inf & 0x80)
-		{
-		i=ASN1_R_BAD_OBJECT_HEADER;
-		goto err;
-		}
-
-	if (tag != V_ASN1_OBJECT)
-		{
-		i=ASN1_R_EXPECTING_AN_OBJECT;
-		goto err;
-		}
-	ret = c2i_ASN1_OBJECT(a, &p, len);
-	if(ret) *pp = p;
-	return ret;
-err:
-	ASN1err(ASN1_F_D2I_ASN1_OBJECT,i);
-	if ((ret != NULL) && ((a == NULL) || (*a != ret)))
-		ASN1_OBJECT_free(ret);
-	return(NULL);
-}
-ASN1_OBJECT *c2i_ASN1_OBJECT(ASN1_OBJECT **a, const unsigned char **pp,
-	     long len)
-	{
-	ASN1_OBJECT *ret=NULL;
-	const unsigned char *p;
-	int i;
-
-	/* only the ASN1_OBJECTs from the 'table' will have values
-	 * for ->sn or ->ln */
-	if ((a == NULL) || ((*a) == NULL) ||
-		!((*a)->flags & ASN1_OBJECT_FLAG_DYNAMIC))
-		{
-		if ((ret=ASN1_OBJECT_new()) == NULL) return(NULL);
-		}
-	else	ret=(*a);
-
-	p= *pp;
-	if ((ret->data == NULL) || (ret->length < len))
-		{
-		if (ret->data != NULL) OPENSSL_free(ret->data);
-		ret->data=(unsigned char *)OPENSSL_malloc(len ? (int)len : 1);
-		ret->flags|=ASN1_OBJECT_FLAG_DYNAMIC_DATA;
-		if (ret->data == NULL)
-			{ i=ERR_R_MALLOC_FAILURE; goto err; }
-		}
-	memcpy(ret->data,p,(int)len);
-	ret->length=(int)len;
-	ret->sn=NULL;
-	ret->ln=NULL;
-	/* ret->flags=ASN1_OBJECT_FLAG_DYNAMIC; we know it is dynamic */
-	p+=len;
-
-	if (a != NULL) (*a)=ret;
-	*pp=p;
-	return(ret);
-err:
-	ASN1err(ASN1_F_C2I_ASN1_OBJECT,i);
-	if ((ret != NULL) && ((a == NULL) || (*a != ret)))
-		ASN1_OBJECT_free(ret);
-	return(NULL);
-	}
-
-ASN1_OBJECT *ASN1_OBJECT_new(void)
-	{
-	ASN1_OBJECT *ret;
-
-	ret=(ASN1_OBJECT *)OPENSSL_malloc(sizeof(ASN1_OBJECT));
-	if (ret == NULL)
-		{
-		ASN1err(ASN1_F_ASN1_OBJECT_NEW,ERR_R_MALLOC_FAILURE);
-		return(NULL);
-		}
-	ret->length=0;
-	ret->data=NULL;
-	ret->nid=0;
-	ret->sn=NULL;
-	ret->ln=NULL;
-	ret->flags=ASN1_OBJECT_FLAG_DYNAMIC;
-	return(ret);
-	}
-
-void ASN1_OBJECT_free(ASN1_OBJECT *a)
-	{
-	if (a == NULL) return;
-	if (a->flags & ASN1_OBJECT_FLAG_DYNAMIC_STRINGS)
-		{
-#ifndef CONST_STRICT /* disable purely for compile-time strict const checking. Doing this on a "real" compile will cause memory leaks */
-		if (a->sn != NULL) OPENSSL_free((void *)a->sn);
-		if (a->ln != NULL) OPENSSL_free((void *)a->ln);
-#endif
-		a->sn=a->ln=NULL;
-		}
-	if (a->flags & ASN1_OBJECT_FLAG_DYNAMIC_DATA)
-		{
-		if (a->data != NULL) OPENSSL_free(a->data);
-		a->data=NULL;
-		a->length=0;
-		}
-	if (a->flags & ASN1_OBJECT_FLAG_DYNAMIC)
-		OPENSSL_free(a);
-	}
-
-ASN1_OBJECT *ASN1_OBJECT_create(int nid, unsigned char *data, int len,
-	     const char *sn, const char *ln)
-	{
-	ASN1_OBJECT o;
-
-	o.sn=sn;
-	o.ln=ln;
-	o.data=data;
-	o.nid=nid;
-	o.length=len;
-	o.flags=ASN1_OBJECT_FLAG_DYNAMIC|ASN1_OBJECT_FLAG_DYNAMIC_STRINGS|
-		ASN1_OBJECT_FLAG_DYNAMIC_DATA;
-	return(OBJ_dup(&o));
-	}
-
-IMPLEMENT_STACK_OF(ASN1_OBJECT)
-IMPLEMENT_ASN1_SET_OF(ASN1_OBJECT)
diff --git a/crypto/openssl/crypto/asn1/a_octet.c b/crypto/openssl/crypto/asn1/a_octet.c
deleted file mode 100644
index 24fd0f8e5a76..000000000000
--- a/crypto/openssl/crypto/asn1/a_octet.c
+++ /dev/null
@@ -1,71 +0,0 @@
-/* crypto/asn1/a_octet.c */
-/* Copyright (C) 1995-1998 Eric Young (eay@cryptsoft.com)
- * All rights reserved.
- *
- * This package is an SSL implementation written
- * by Eric Young (eay@cryptsoft.com).
- * The implementation was written so as to conform with Netscapes SSL.
- * 
- * This library is free for commercial and non-commercial use as long as
- * the following conditions are aheared to.  The following conditions
- * apply to all code found in this distribution, be it the RC4, RSA,
- * lhash, DES, etc., code; not just the SSL code.  The SSL documentation
- * included with this distribution is covered by the same copyright terms
- * except that the holder is Tim Hudson (tjh@cryptsoft.com).
- * 
- * Copyright remains Eric Young's, and as such any Copyright notices in
- * the code are not to be removed.
- * If this package is used in a product, Eric Young should be given attribution
- * as the author of the parts of the library used.
- * This can be in the form of a textual message at program startup or
- * in documentation (online or textual) provided with the package.
- * 
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions
- * are met:
- * 1. Redistributions of source code must retain the copyright
- *    notice, this list of conditions and the following disclaimer.
- * 2. Redistributions in binary form must reproduce the above copyright
- *    notice, this list of conditions and the following disclaimer in the
- *    documentation and/or other materials provided with the distribution.
- * 3. All advertising materials mentioning features or use of this software
- *    must display the following acknowledgement:
- *    "This product includes cryptographic software written by
- *     Eric Young (eay@cryptsoft.com)"
- *    The word 'cryptographic' can be left out if the rouines from the library
- *    being used are not cryptographic related :-).
- * 4. If you include any Windows specific code (or a derivative thereof) from 
- *    the apps directory (application code) you must include an acknowledgement:
- *    "This product includes software written by Tim Hudson (tjh@cryptsoft.com)"
- * 
- * THIS SOFTWARE IS PROVIDED BY ERIC YOUNG ``AS IS'' AND
- * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
- * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
- * ARE DISCLAIMED.  IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE
- * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
- * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
- * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
- * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
- * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
- * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
- * SUCH DAMAGE.
- * 
- * The licence and distribution terms for any publically available version or
- * derivative of this code cannot be changed.  i.e. this code cannot simply be
- * copied and put under another distribution licence
- * [including the GNU Public Licence.]
- */
-
-#include <stdio.h>
-#include "cryptlib.h"
-#include <openssl/asn1.h>
-
-ASN1_OCTET_STRING *ASN1_OCTET_STRING_dup(ASN1_OCTET_STRING *x)
-{ return M_ASN1_OCTET_STRING_dup(x); }
-
-int ASN1_OCTET_STRING_cmp(ASN1_OCTET_STRING *a, ASN1_OCTET_STRING *b)
-{ return M_ASN1_OCTET_STRING_cmp(a, b); }
-
-int ASN1_OCTET_STRING_set(ASN1_OCTET_STRING *x, const unsigned char *d, int len)
-{ return M_ASN1_OCTET_STRING_set(x, d, len); }
-
diff --git a/crypto/openssl/crypto/asn1/a_print.c b/crypto/openssl/crypto/asn1/a_print.c
deleted file mode 100644
index d18e77232044..000000000000
--- a/crypto/openssl/crypto/asn1/a_print.c
+++ /dev/null
@@ -1,127 +0,0 @@
-/* crypto/asn1/a_print.c */
-/* Copyright (C) 1995-1998 Eric Young (eay@cryptsoft.com)
- * All rights reserved.
- *
- * This package is an SSL implementation written
- * by Eric Young (eay@cryptsoft.com).
- * The implementation was written so as to conform with Netscapes SSL.
- * 
- * This library is free for commercial and non-commercial use as long as
- * the following conditions are aheared to.  The following conditions
- * apply to all code found in this distribution, be it the RC4, RSA,
- * lhash, DES, etc., code; not just the SSL code.  The SSL documentation
- * included with this distribution is covered by the same copyright terms
- * except that the holder is Tim Hudson (tjh@cryptsoft.com).
- * 
- * Copyright remains Eric Young's, and as such any Copyright notices in
- * the code are not to be removed.
- * If this package is used in a product, Eric Young should be given attribution
- * as the author of the parts of the library used.
- * This can be in the form of a textual message at program startup or
- * in documentation (online or textual) provided with the package.
- * 
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions
- * are met:
- * 1. Redistributions of source code must retain the copyright
- *    notice, this list of conditions and the following disclaimer.
- * 2. Redistributions in binary form must reproduce the above copyright
- *    notice, this list of conditions and the following disclaimer in the
- *    documentation and/or other materials provided with the distribution.
- * 3. All advertising materials mentioning features or use of this software
- *    must display the following acknowledgement:
- *    "This product includes cryptographic software written by
- *     Eric Young (eay@cryptsoft.com)"
- *    The word 'cryptographic' can be left out if the rouines from the library
- *    being used are not cryptographic related :-).
- * 4. If you include any Windows specific code (or a derivative thereof) from 
- *    the apps directory (application code) you must include an acknowledgement:
- *    "This product includes software written by Tim Hudson (tjh@cryptsoft.com)"
- * 
- * THIS SOFTWARE IS PROVIDED BY ERIC YOUNG ``AS IS'' AND
- * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
- * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
- * ARE DISCLAIMED.  IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE
- * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
- * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
- * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
- * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
- * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
- * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
- * SUCH DAMAGE.
- * 
- * The licence and distribution terms for any publically available version or
- * derivative of this code cannot be changed.  i.e. this code cannot simply be
- * copied and put under another distribution licence
- * [including the GNU Public Licence.]
- */
-
-#include <stdio.h>
-#include "cryptlib.h"
-#include <openssl/asn1.h>
-
-int ASN1_PRINTABLE_type(const unsigned char *s, int len)
-	{
-	int c;
-	int ia5=0;
-	int t61=0;
-
-	if (len <= 0) len= -1;
-	if (s == NULL) return(V_ASN1_PRINTABLESTRING);
-
-	while ((*s) && (len-- != 0))
-		{
-		c= *(s++);
-#ifndef CHARSET_EBCDIC
-		if (!(	((c >= 'a') && (c <= 'z')) ||
-			((c >= 'A') && (c <= 'Z')) ||
-			(c == ' ') ||
-			((c >= '0') && (c <= '9')) ||
-			(c == ' ') || (c == '\'') ||
-			(c == '(') || (c == ')') ||
-			(c == '+') || (c == ',') ||
-			(c == '-') || (c == '.') ||
-			(c == '/') || (c == ':') ||
-			(c == '=') || (c == '?')))
-			ia5=1;
-		if (c&0x80)
-			t61=1;
-#else
-		if (!isalnum(c) && (c != ' ') &&
-		    strchr("'()+,-./:=?", c) == NULL)
-			ia5=1;
-		if (os_toascii[c] & 0x80)
-			t61=1;
-#endif
-		}
-	if (t61) return(V_ASN1_T61STRING);
-	if (ia5) return(V_ASN1_IA5STRING);
-	return(V_ASN1_PRINTABLESTRING);
-	}
-
-int ASN1_UNIVERSALSTRING_to_string(ASN1_UNIVERSALSTRING *s)
-	{
-	int i;
-	unsigned char *p;
-
-	if (s->type != V_ASN1_UNIVERSALSTRING) return(0);
-	if ((s->length%4) != 0) return(0);
-	p=s->data;
-	for (i=0; i<s->length; i+=4)
-		{
-		if ((p[0] != '\0') || (p[1] != '\0') || (p[2] != '\0'))
-			break;
-		else
-			p+=4;
-		}
-	if (i < s->length) return(0);
-	p=s->data;
-	for (i=3; i<s->length; i+=4)
-		{
-		*(p++)=s->data[i];
-		}
-	*(p)='\0';
-	s->length/=4;
-	s->type=ASN1_PRINTABLE_type(s->data,s->length);
-	return(1);
-	}
diff --git a/crypto/openssl/crypto/asn1/a_set.c b/crypto/openssl/crypto/asn1/a_set.c
deleted file mode 100644
index 958558c204dd..000000000000
--- a/crypto/openssl/crypto/asn1/a_set.c
+++ /dev/null
@@ -1,238 +0,0 @@
-/* crypto/asn1/a_set.c */
-/* Copyright (C) 1995-1998 Eric Young (eay@cryptsoft.com)
- * All rights reserved.
- *
- * This package is an SSL implementation written
- * by Eric Young (eay@cryptsoft.com).
- * The implementation was written so as to conform with Netscapes SSL.
- * 
- * This library is free for commercial and non-commercial use as long as
- * the following conditions are aheared to.  The following conditions
- * apply to all code found in this distribution, be it the RC4, RSA,
- * lhash, DES, etc., code; not just the SSL code.  The SSL documentation
- * included with this distribution is covered by the same copyright terms
- * except that the holder is Tim Hudson (tjh@cryptsoft.com).
- * 
- * Copyright remains Eric Young's, and as such any Copyright notices in
- * the code are not to be removed.
- * If this package is used in a product, Eric Young should be given attribution
- * as the author of the parts of the library used.
- * This can be in the form of a textual message at program startup or
- * in documentation (online or textual) provided with the package.
- * 
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions
- * are met:
- * 1. Redistributions of source code must retain the copyright
- *    notice, this list of conditions and the following disclaimer.
- * 2. Redistributions in binary form must reproduce the above copyright
- *    notice, this list of conditions and the following disclaimer in the
- *    documentation and/or other materials provided with the distribution.
- * 3. All advertising materials mentioning features or use of this software
- *    must display the following acknowledgement:
- *    "This product includes cryptographic software written by
- *     Eric Young (eay@cryptsoft.com)"
- *    The word 'cryptographic' can be left out if the rouines from the library
- *    being used are not cryptographic related :-).
- * 4. If you include any Windows specific code (or a derivative thereof) from 
- *    the apps directory (application code) you must include an acknowledgement:
- *    "This product includes software written by Tim Hudson (tjh@cryptsoft.com)"
- * 
- * THIS SOFTWARE IS PROVIDED BY ERIC YOUNG ``AS IS'' AND
- * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
- * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
- * ARE DISCLAIMED.  IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE
- * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
- * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
- * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
- * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
- * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
- * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
- * SUCH DAMAGE.
- * 
- * The licence and distribution terms for any publically available version or
- * derivative of this code cannot be changed.  i.e. this code cannot simply be
- * copied and put under another distribution licence
- * [including the GNU Public Licence.]
- */
-
-#include <stdio.h>
-#include "cryptlib.h"
-#include <openssl/asn1_mac.h>
-
-#ifndef NO_ASN1_OLD
-
-typedef struct
-    {
-    unsigned char *pbData;
-    int cbData;
-    } MYBLOB;
-
-/* SetBlobCmp
- * This function compares two elements of SET_OF block
- */
-static int SetBlobCmp(const void *elem1, const void *elem2 )
-    {
-    const MYBLOB *b1 = (const MYBLOB *)elem1;
-    const MYBLOB *b2 = (const MYBLOB *)elem2;
-    int r;
-
-    r = memcmp(b1->pbData, b2->pbData,
-	       b1->cbData < b2->cbData ? b1->cbData : b2->cbData);
-    if(r != 0)
-	return r;
-    return b1->cbData-b2->cbData;
-    }
-
-/* int is_set:  if TRUE, then sort the contents (i.e. it isn't a SEQUENCE)    */
-int i2d_ASN1_SET(STACK *a, unsigned char **pp, i2d_of_void *i2d, int ex_tag,
-		 int ex_class, int is_set)
-	{
-	int ret=0,r;
-	int i;
-	unsigned char *p;
-        unsigned char *pStart, *pTempMem;
-        MYBLOB *rgSetBlob;
-        int totSize;
-
-	if (a == NULL) return(0);
-	for (i=sk_num(a)-1; i>=0; i--)
-		ret+=i2d(sk_value(a,i),NULL);
-	r=ASN1_object_size(1,ret,ex_tag);
-	if (pp == NULL) return(r);
-
-	p= *pp;
-	ASN1_put_object(&p,1,ret,ex_tag,ex_class);
-
-/* Modified by gp@nsj.co.jp */
-	/* And then again by Ben */
-	/* And again by Steve */
-
-	if(!is_set || (sk_num(a) < 2))
-		{
-		for (i=0; i<sk_num(a); i++)
-                	i2d(sk_value(a,i),&p);
-
-		*pp=p;
-		return(r);
-		}
-
-        pStart  = p; /* Catch the beg of Setblobs*/
-		/* In this array we will store the SET blobs */
-		rgSetBlob = (MYBLOB *)OPENSSL_malloc(sk_num(a) * sizeof(MYBLOB));
-		if (rgSetBlob == NULL)
-			{
-			ASN1err(ASN1_F_I2D_ASN1_SET,ERR_R_MALLOC_FAILURE);
-			return(0);
-			}
-
-        for (i=0; i<sk_num(a); i++)
-	        {
-                rgSetBlob[i].pbData = p;  /* catch each set encode blob */
-                i2d(sk_value(a,i),&p);
-                rgSetBlob[i].cbData = p - rgSetBlob[i].pbData; /* Length of this
-SetBlob
-*/
-		}
-        *pp=p;
-        totSize = p - pStart; /* This is the total size of all set blobs */
-
- /* Now we have to sort the blobs. I am using a simple algo.
-    *Sort ptrs *Copy to temp-mem *Copy from temp-mem to user-mem*/
-        qsort( rgSetBlob, sk_num(a), sizeof(MYBLOB), SetBlobCmp);
-		if (!(pTempMem = OPENSSL_malloc(totSize)))
-			{
-			ASN1err(ASN1_F_I2D_ASN1_SET,ERR_R_MALLOC_FAILURE);
-			return(0);
-			}
-
-/* Copy to temp mem */
-        p = pTempMem;
-        for(i=0; i<sk_num(a); ++i)
-		{
-                memcpy(p, rgSetBlob[i].pbData, rgSetBlob[i].cbData);
-                p += rgSetBlob[i].cbData;
-		}
-
-/* Copy back to user mem*/
-        memcpy(pStart, pTempMem, totSize);
-        OPENSSL_free(pTempMem);
-        OPENSSL_free(rgSetBlob);
-
-        return(r);
-        }
-
-STACK *d2i_ASN1_SET(STACK **a, const unsigned char **pp, long length,
-		    d2i_of_void *d2i, void (*free_func)(void *), int ex_tag,
-		    int ex_class)
-	{
-	ASN1_const_CTX c;
-	STACK *ret=NULL;
-
-	if ((a == NULL) || ((*a) == NULL))
-		{
-		if ((ret=sk_new_null()) == NULL)
-			{
-			ASN1err(ASN1_F_D2I_ASN1_SET,ERR_R_MALLOC_FAILURE);
-			goto err;
-			}
-		}
-	else
-		ret=(*a);
-
-	c.p= *pp;
-	c.max=(length == 0)?0:(c.p+length);
-
-	c.inf=ASN1_get_object(&c.p,&c.slen,&c.tag,&c.xclass,c.max-c.p);
-	if (c.inf & 0x80) goto err;
-	if (ex_class != c.xclass)
-		{
-		ASN1err(ASN1_F_D2I_ASN1_SET,ASN1_R_BAD_CLASS);
-		goto err;
-		}
-	if (ex_tag != c.tag)
-		{
-		ASN1err(ASN1_F_D2I_ASN1_SET,ASN1_R_BAD_TAG);
-		goto err;
-		}
-	if ((c.slen+c.p) > c.max)
-		{
-		ASN1err(ASN1_F_D2I_ASN1_SET,ASN1_R_LENGTH_ERROR);
-		goto err;
-		}
-	/* check for infinite constructed - it can be as long
-	 * as the amount of data passed to us */
-	if (c.inf == (V_ASN1_CONSTRUCTED+1))
-		c.slen=length+ *pp-c.p;
-	c.max=c.p+c.slen;
-
-	while (c.p < c.max)
-		{
-		char *s;
-
-		if (M_ASN1_D2I_end_sequence()) break;
-		/* XXX: This was called with 4 arguments, incorrectly, it seems
-		   if ((s=func(NULL,&c.p,c.slen,c.max-c.p)) == NULL) */
-		if ((s=d2i(NULL,&c.p,c.slen)) == NULL)
-			{
-			ASN1err(ASN1_F_D2I_ASN1_SET,ASN1_R_ERROR_PARSING_SET_ELEMENT);
-			asn1_add_error(*pp,(int)(c.q- *pp));
-			goto err;
-			}
-		if (!sk_push(ret,s)) goto err;
-		}
-	if (a != NULL) (*a)=ret;
-	*pp=c.p;
-	return(ret);
-err:
-	if ((ret != NULL) && ((a == NULL) || (*a != ret)))
-		{
-		if (free_func != NULL)
-			sk_pop_free(ret,free_func);
-		else
-			sk_free(ret);
-		}
-	return(NULL);
-	}
-
-#endif
diff --git a/crypto/openssl/crypto/asn1/a_sign.c b/crypto/openssl/crypto/asn1/a_sign.c
deleted file mode 100644
index 1081950518c7..000000000000
--- a/crypto/openssl/crypto/asn1/a_sign.c
+++ /dev/null
@@ -1,295 +0,0 @@
-/* crypto/asn1/a_sign.c */
-/* Copyright (C) 1995-1998 Eric Young (eay@cryptsoft.com)
- * All rights reserved.
- *
- * This package is an SSL implementation written
- * by Eric Young (eay@cryptsoft.com).
- * The implementation was written so as to conform with Netscapes SSL.
- * 
- * This library is free for commercial and non-commercial use as long as
- * the following conditions are aheared to.  The following conditions
- * apply to all code found in this distribution, be it the RC4, RSA,
- * lhash, DES, etc., code; not just the SSL code.  The SSL documentation
- * included with this distribution is covered by the same copyright terms
- * except that the holder is Tim Hudson (tjh@cryptsoft.com).
- * 
- * Copyright remains Eric Young's, and as such any Copyright notices in
- * the code are not to be removed.
- * If this package is used in a product, Eric Young should be given attribution
- * as the author of the parts of the library used.
- * This can be in the form of a textual message at program startup or
- * in documentation (online or textual) provided with the package.
- * 
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions
- * are met:
- * 1. Redistributions of source code must retain the copyright
- *    notice, this list of conditions and the following disclaimer.
- * 2. Redistributions in binary form must reproduce the above copyright
- *    notice, this list of conditions and the following disclaimer in the
- *    documentation and/or other materials provided with the distribution.
- * 3. All advertising materials mentioning features or use of this software
- *    must display the following acknowledgement:
- *    "This product includes cryptographic software written by
- *     Eric Young (eay@cryptsoft.com)"
- *    The word 'cryptographic' can be left out if the rouines from the library
- *    being used are not cryptographic related :-).
- * 4. If you include any Windows specific code (or a derivative thereof) from 
- *    the apps directory (application code) you must include an acknowledgement:
- *    "This product includes software written by Tim Hudson (tjh@cryptsoft.com)"
- * 
- * THIS SOFTWARE IS PROVIDED BY ERIC YOUNG ``AS IS'' AND
- * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
- * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
- * ARE DISCLAIMED.  IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE
- * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
- * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
- * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
- * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
- * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
- * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
- * SUCH DAMAGE.
- * 
- * The licence and distribution terms for any publically available version or
- * derivative of this code cannot be changed.  i.e. this code cannot simply be
- * copied and put under another distribution licence
- * [including the GNU Public Licence.]
- */
-/* ====================================================================
- * Copyright (c) 1998-2003 The OpenSSL Project.  All rights reserved.
- *
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions
- * are met:
- *
- * 1. Redistributions of source code must retain the above copyright
- *    notice, this list of conditions and the following disclaimer. 
- *
- * 2. Redistributions in binary form must reproduce the above copyright
- *    notice, this list of conditions and the following disclaimer in
- *    the documentation and/or other materials provided with the
- *    distribution.
- *
- * 3. All advertising materials mentioning features or use of this
- *    software must display the following acknowledgment:
- *    "This product includes software developed by the OpenSSL Project
- *    for use in the OpenSSL Toolkit. (http://www.openssl.org/)"
- *
- * 4. The names "OpenSSL Toolkit" and "OpenSSL Project" must not be used to
- *    endorse or promote products derived from this software without
- *    prior written permission. For written permission, please contact
- *    openssl-core@openssl.org.
- *
- * 5. Products derived from this software may not be called "OpenSSL"
- *    nor may "OpenSSL" appear in their names without prior written
- *    permission of the OpenSSL Project.
- *
- * 6. Redistributions of any form whatsoever must retain the following
- *    acknowledgment:
- *    "This product includes software developed by the OpenSSL Project
- *    for use in the OpenSSL Toolkit (http://www.openssl.org/)"
- *
- * THIS SOFTWARE IS PROVIDED BY THE OpenSSL PROJECT ``AS IS'' AND ANY
- * EXPRESSED OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
- * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR
- * PURPOSE ARE DISCLAIMED.  IN NO EVENT SHALL THE OpenSSL PROJECT OR
- * ITS CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
- * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
- * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
- * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
- * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
- * STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
- * ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED
- * OF THE POSSIBILITY OF SUCH DAMAGE.
- * ====================================================================
- *
- * This product includes cryptographic software written by Eric Young
- * (eay@cryptsoft.com).  This product includes software written by Tim
- * Hudson (tjh@cryptsoft.com).
- *
- */
-
-#include <stdio.h>
-#include <time.h>
-
-#include "cryptlib.h"
-
-#ifndef NO_SYS_TYPES_H
-# include <sys/types.h>
-#endif
-
-#include <openssl/bn.h>
-#include <openssl/evp.h>
-#include <openssl/x509.h>
-#include <openssl/objects.h>
-#include <openssl/buffer.h>
-
-#ifndef NO_ASN1_OLD
-
-int ASN1_sign(i2d_of_void *i2d, X509_ALGOR *algor1, X509_ALGOR *algor2,
-	      ASN1_BIT_STRING *signature, char *data, EVP_PKEY *pkey,
-	      const EVP_MD *type)
-	{
-	EVP_MD_CTX ctx;
-	unsigned char *p,*buf_in=NULL,*buf_out=NULL;
-	int i,inl=0,outl=0,outll=0;
-	X509_ALGOR *a;
-
-	EVP_MD_CTX_init(&ctx);
-	for (i=0; i<2; i++)
-		{
-		if (i == 0)
-			a=algor1;
-		else
-			a=algor2;
-		if (a == NULL) continue;
-                if (type->pkey_type == NID_dsaWithSHA1)
-			{
-			/* special case: RFC 2459 tells us to omit 'parameters'
-			 * with id-dsa-with-sha1 */
-			ASN1_TYPE_free(a->parameter);
-			a->parameter = NULL;
-			}
-		else if ((a->parameter == NULL) || 
-			(a->parameter->type != V_ASN1_NULL))
-			{
-			ASN1_TYPE_free(a->parameter);
-			if ((a->parameter=ASN1_TYPE_new()) == NULL) goto err;
-			a->parameter->type=V_ASN1_NULL;
-			}
-		ASN1_OBJECT_free(a->algorithm);
-		a->algorithm=OBJ_nid2obj(type->pkey_type);
-		if (a->algorithm == NULL)
-			{
-			ASN1err(ASN1_F_ASN1_SIGN,ASN1_R_UNKNOWN_OBJECT_TYPE);
-			goto err;
-			}
-		if (a->algorithm->length == 0)
-			{
-			ASN1err(ASN1_F_ASN1_SIGN,ASN1_R_THE_ASN1_OBJECT_IDENTIFIER_IS_NOT_KNOWN_FOR_THIS_MD);
-			goto err;
-			}
-		}
-	inl=i2d(data,NULL);
-	buf_in=(unsigned char *)OPENSSL_malloc((unsigned int)inl);
-	outll=outl=EVP_PKEY_size(pkey);
-	buf_out=(unsigned char *)OPENSSL_malloc((unsigned int)outl);
-	if ((buf_in == NULL) || (buf_out == NULL))
-		{
-		outl=0;
-		ASN1err(ASN1_F_ASN1_SIGN,ERR_R_MALLOC_FAILURE);
-		goto err;
-		}
-	p=buf_in;
-
-	i2d(data,&p);
-	EVP_SignInit_ex(&ctx,type, NULL);
-	EVP_SignUpdate(&ctx,(unsigned char *)buf_in,inl);
-	if (!EVP_SignFinal(&ctx,(unsigned char *)buf_out,
-			(unsigned int *)&outl,pkey))
-		{
-		outl=0;
-		ASN1err(ASN1_F_ASN1_SIGN,ERR_R_EVP_LIB);
-		goto err;
-		}
-	if (signature->data != NULL) OPENSSL_free(signature->data);
-	signature->data=buf_out;
-	buf_out=NULL;
-	signature->length=outl;
-	/* In the interests of compatibility, I'll make sure that
-	 * the bit string has a 'not-used bits' value of 0
-	 */
-	signature->flags&= ~(ASN1_STRING_FLAG_BITS_LEFT|0x07);
-	signature->flags|=ASN1_STRING_FLAG_BITS_LEFT;
-err:
-	EVP_MD_CTX_cleanup(&ctx);
-	if (buf_in != NULL)
-		{ OPENSSL_cleanse((char *)buf_in,(unsigned int)inl); OPENSSL_free(buf_in); }
-	if (buf_out != NULL)
-		{ OPENSSL_cleanse((char *)buf_out,outll); OPENSSL_free(buf_out); }
-	return(outl);
-	}
-
-#endif
-
-int ASN1_item_sign(const ASN1_ITEM *it, X509_ALGOR *algor1, X509_ALGOR *algor2,
-	     ASN1_BIT_STRING *signature, void *asn, EVP_PKEY *pkey,
-	     const EVP_MD *type)
-	{
-	EVP_MD_CTX ctx;
-	unsigned char *buf_in=NULL,*buf_out=NULL;
-	int i,inl=0,outl=0,outll=0;
-	X509_ALGOR *a;
-
-	EVP_MD_CTX_init(&ctx);
-	for (i=0; i<2; i++)
-		{
-		if (i == 0)
-			a=algor1;
-		else
-			a=algor2;
-		if (a == NULL) continue;
-                if (type->pkey_type == NID_dsaWithSHA1 ||
-			type->pkey_type == NID_ecdsa_with_SHA1)
-			{
-			/* special case: RFC 3279 tells us to omit 'parameters'
-			 * with id-dsa-with-sha1 and ecdsa-with-SHA1 */
-			ASN1_TYPE_free(a->parameter);
-			a->parameter = NULL;
-			}
-		else if ((a->parameter == NULL) || 
-			(a->parameter->type != V_ASN1_NULL))
-			{
-			ASN1_TYPE_free(a->parameter);
-			if ((a->parameter=ASN1_TYPE_new()) == NULL) goto err;
-			a->parameter->type=V_ASN1_NULL;
-			}
-		ASN1_OBJECT_free(a->algorithm);
-		a->algorithm=OBJ_nid2obj(type->pkey_type);
-		if (a->algorithm == NULL)
-			{
-			ASN1err(ASN1_F_ASN1_ITEM_SIGN,ASN1_R_UNKNOWN_OBJECT_TYPE);
-			goto err;
-			}
-		if (a->algorithm->length == 0)
-			{
-			ASN1err(ASN1_F_ASN1_ITEM_SIGN,ASN1_R_THE_ASN1_OBJECT_IDENTIFIER_IS_NOT_KNOWN_FOR_THIS_MD);
-			goto err;
-			}
-		}
-	inl=ASN1_item_i2d(asn,&buf_in, it);
-	outll=outl=EVP_PKEY_size(pkey);
-	buf_out=(unsigned char *)OPENSSL_malloc((unsigned int)outl);
-	if ((buf_in == NULL) || (buf_out == NULL))
-		{
-		outl=0;
-		ASN1err(ASN1_F_ASN1_ITEM_SIGN,ERR_R_MALLOC_FAILURE);
-		goto err;
-		}
-
-	EVP_SignInit_ex(&ctx,type, NULL);
-	EVP_SignUpdate(&ctx,(unsigned char *)buf_in,inl);
-	if (!EVP_SignFinal(&ctx,(unsigned char *)buf_out,
-			(unsigned int *)&outl,pkey))
-		{
-		outl=0;
-		ASN1err(ASN1_F_ASN1_ITEM_SIGN,ERR_R_EVP_LIB);
-		goto err;
-		}
-	if (signature->data != NULL) OPENSSL_free(signature->data);
-	signature->data=buf_out;
-	buf_out=NULL;
-	signature->length=outl;
-	/* In the interests of compatibility, I'll make sure that
-	 * the bit string has a 'not-used bits' value of 0
-	 */
-	signature->flags&= ~(ASN1_STRING_FLAG_BITS_LEFT|0x07);
-	signature->flags|=ASN1_STRING_FLAG_BITS_LEFT;
-err:
-	EVP_MD_CTX_cleanup(&ctx);
-	if (buf_in != NULL)
-		{ OPENSSL_cleanse((char *)buf_in,(unsigned int)inl); OPENSSL_free(buf_in); }
-	if (buf_out != NULL)
-		{ OPENSSL_cleanse((char *)buf_out,outll); OPENSSL_free(buf_out); }
-	return(outl);
-	}
diff --git a/crypto/openssl/crypto/asn1/a_strex.c b/crypto/openssl/crypto/asn1/a_strex.c
deleted file mode 100644
index c2dbb6f9a58d..000000000000
--- a/crypto/openssl/crypto/asn1/a_strex.c
+++ /dev/null
@@ -1,567 +0,0 @@
-/* a_strex.c */
-/* Written by Dr Stephen N Henson (shenson@bigfoot.com) for the OpenSSL
- * project 2000.
- */
-/* ====================================================================
- * Copyright (c) 2000 The OpenSSL Project.  All rights reserved.
- *
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions
- * are met:
- *
- * 1. Redistributions of source code must retain the above copyright
- *    notice, this list of conditions and the following disclaimer. 
- *
- * 2. Redistributions in binary form must reproduce the above copyright
- *    notice, this list of conditions and the following disclaimer in
- *    the documentation and/or other materials provided with the
- *    distribution.
- *
- * 3. All advertising materials mentioning features or use of this
- *    software must display the following acknowledgment:
- *    "This product includes software developed by the OpenSSL Project
- *    for use in the OpenSSL Toolkit. (http://www.OpenSSL.org/)"
- *
- * 4. The names "OpenSSL Toolkit" and "OpenSSL Project" must not be used to
- *    endorse or promote products derived from this software without
- *    prior written permission. For written permission, please contact
- *    licensing@OpenSSL.org.
- *
- * 5. Products derived from this software may not be called "OpenSSL"
- *    nor may "OpenSSL" appear in their names without prior written
- *    permission of the OpenSSL Project.
- *
- * 6. Redistributions of any form whatsoever must retain the following
- *    acknowledgment:
- *    "This product includes software developed by the OpenSSL Project
- *    for use in the OpenSSL Toolkit (http://www.OpenSSL.org/)"
- *
- * THIS SOFTWARE IS PROVIDED BY THE OpenSSL PROJECT ``AS IS'' AND ANY
- * EXPRESSED OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
- * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR
- * PURPOSE ARE DISCLAIMED.  IN NO EVENT SHALL THE OpenSSL PROJECT OR
- * ITS CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
- * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
- * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
- * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
- * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
- * STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
- * ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED
- * OF THE POSSIBILITY OF SUCH DAMAGE.
- * ====================================================================
- *
- * This product includes cryptographic software written by Eric Young
- * (eay@cryptsoft.com).  This product includes software written by Tim
- * Hudson (tjh@cryptsoft.com).
- *
- */
-
-#include <stdio.h>
-#include <string.h>
-#include "cryptlib.h"
-#include <openssl/crypto.h>
-#include <openssl/x509.h>
-#include <openssl/asn1.h>
-
-#include "charmap.h"
-
-/* ASN1_STRING_print_ex() and X509_NAME_print_ex().
- * Enhanced string and name printing routines handling
- * multibyte characters, RFC2253 and a host of other
- * options.
- */
-
-
-#define CHARTYPE_BS_ESC		(ASN1_STRFLGS_ESC_2253 | CHARTYPE_FIRST_ESC_2253 | CHARTYPE_LAST_ESC_2253)
-
-
-/* Three IO functions for sending data to memory, a BIO and
- * and a FILE pointer.
- */
-#if 0				/* never used */
-static int send_mem_chars(void *arg, const void *buf, int len)
-{
-	unsigned char **out = arg;
-	if(!out) return 1;
-	memcpy(*out, buf, len);
-	*out += len;
-	return 1;
-}
-#endif
-
-static int send_bio_chars(void *arg, const void *buf, int len)
-{
-	if(!arg) return 1;
-	if(BIO_write(arg, buf, len) != len) return 0;
-	return 1;
-}
-
-static int send_fp_chars(void *arg, const void *buf, int len)
-{
-	if(!arg) return 1;
-	if(fwrite(buf, 1, len, arg) != (unsigned int)len) return 0;
-	return 1;
-}
-
-typedef int char_io(void *arg, const void *buf, int len);
-
-/* This function handles display of
- * strings, one character at a time.
- * It is passed an unsigned long for each
- * character because it could come from 2 or even
- * 4 byte forms.
- */
-
-static int do_esc_char(unsigned long c, unsigned char flags, char *do_quotes, char_io *io_ch, void *arg)
-{
-	unsigned char chflgs, chtmp;
-	char tmphex[HEX_SIZE(long)+3];
-
-	if(c > 0xffffffffL)
-		return -1;
-	if(c > 0xffff) {
-		BIO_snprintf(tmphex, sizeof tmphex, "\\W%08lX", c);
-		if(!io_ch(arg, tmphex, 10)) return -1;
-		return 10;
-	}
-	if(c > 0xff) {
-		BIO_snprintf(tmphex, sizeof tmphex, "\\U%04lX", c);
-		if(!io_ch(arg, tmphex, 6)) return -1;
-		return 6;
-	}
-	chtmp = (unsigned char)c;
-	if(chtmp > 0x7f) chflgs = flags & ASN1_STRFLGS_ESC_MSB;
-	else chflgs = char_type[chtmp] & flags;
-	if(chflgs & CHARTYPE_BS_ESC) {
-		/* If we don't escape with quotes, signal we need quotes */
-		if(chflgs & ASN1_STRFLGS_ESC_QUOTE) {
-			if(do_quotes) *do_quotes = 1;
-			if(!io_ch(arg, &chtmp, 1)) return -1;
-			return 1;
-		}
-		if(!io_ch(arg, "\\", 1)) return -1;
-		if(!io_ch(arg, &chtmp, 1)) return -1;
-		return 2;
-	}
-	if(chflgs & (ASN1_STRFLGS_ESC_CTRL|ASN1_STRFLGS_ESC_MSB)) {
-		BIO_snprintf(tmphex, 11, "\\%02X", chtmp);
-		if(!io_ch(arg, tmphex, 3)) return -1;
-		return 3;
-	}
-	if(!io_ch(arg, &chtmp, 1)) return -1;
-	return 1;
-}
-
-#define BUF_TYPE_WIDTH_MASK	0x7
-#define BUF_TYPE_CONVUTF8	0x8
-
-/* This function sends each character in a buffer to
- * do_esc_char(). It interprets the content formats
- * and converts to or from UTF8 as appropriate.
- */
-
-static int do_buf(unsigned char *buf, int buflen,
-			int type, unsigned char flags, char *quotes, char_io *io_ch, void *arg)
-{
-	int i, outlen, len;
-	unsigned char orflags, *p, *q;
-	unsigned long c;
-	p = buf;
-	q = buf + buflen;
-	outlen = 0;
-	while(p != q) {
-		if(p == buf && flags & ASN1_STRFLGS_ESC_2253) orflags = CHARTYPE_FIRST_ESC_2253;
-		else orflags = 0;
-		switch(type & BUF_TYPE_WIDTH_MASK) {
-			case 4:
-			c = ((unsigned long)*p++) << 24;
-			c |= ((unsigned long)*p++) << 16;
-			c |= ((unsigned long)*p++) << 8;
-			c |= *p++;
-			break;
-
-			case 2:
-			c = ((unsigned long)*p++) << 8;
-			c |= *p++;
-			break;
-
-			case 1:
-			c = *p++;
-			break;
-			
-			case 0:
-			i = UTF8_getc(p, buflen, &c);
-			if(i < 0) return -1;	/* Invalid UTF8String */
-			p += i;
-			break;
-			default:
-			return -1;	/* invalid width */
-		}
-		if (p == q && flags & ASN1_STRFLGS_ESC_2253) orflags = CHARTYPE_LAST_ESC_2253;
-		if(type & BUF_TYPE_CONVUTF8) {
-			unsigned char utfbuf[6];
-			int utflen;
-			utflen = UTF8_putc(utfbuf, sizeof utfbuf, c);
-			for(i = 0; i < utflen; i++) {
-				/* We don't need to worry about setting orflags correctly
-				 * because if utflen==1 its value will be correct anyway 
-				 * otherwise each character will be > 0x7f and so the 
-				 * character will never be escaped on first and last.
-				 */
-				len = do_esc_char(utfbuf[i], (unsigned char)(flags | orflags), quotes, io_ch, arg);
-				if(len < 0) return -1;
-				outlen += len;
-			}
-		} else {
-			len = do_esc_char(c, (unsigned char)(flags | orflags), quotes, io_ch, arg);
-			if(len < 0) return -1;
-			outlen += len;
-		}
-	}
-	return outlen;
-}
-
-/* This function hex dumps a buffer of characters */
-
-static int do_hex_dump(char_io *io_ch, void *arg, unsigned char *buf, int buflen)
-{
-	static const char hexdig[] = "0123456789ABCDEF";
-	unsigned char *p, *q;
-	char hextmp[2];
-	if(arg) {
-		p = buf;
-		q = buf + buflen;
-		while(p != q) {
-			hextmp[0] = hexdig[*p >> 4];
-			hextmp[1] = hexdig[*p & 0xf];
-			if(!io_ch(arg, hextmp, 2)) return -1;
-			p++;
-		}
-	}
-	return buflen << 1;
-}
-
-/* "dump" a string. This is done when the type is unknown,
- * or the flags request it. We can either dump the content
- * octets or the entire DER encoding. This uses the RFC2253
- * #01234 format.
- */
-
-static int do_dump(unsigned long lflags, char_io *io_ch, void *arg, ASN1_STRING *str)
-{
-	/* Placing the ASN1_STRING in a temp ASN1_TYPE allows
-	 * the DER encoding to readily obtained
-	 */
-	ASN1_TYPE t;
-	unsigned char *der_buf, *p;
-	int outlen, der_len;
-
-	if(!io_ch(arg, "#", 1)) return -1;
-	/* If we don't dump DER encoding just dump content octets */
-	if(!(lflags & ASN1_STRFLGS_DUMP_DER)) {
-		outlen = do_hex_dump(io_ch, arg, str->data, str->length);
-		if(outlen < 0) return -1;
-		return outlen + 1;
-	}
-	t.type = str->type;
-	t.value.ptr = (char *)str;
-	der_len = i2d_ASN1_TYPE(&t, NULL);
-	der_buf = OPENSSL_malloc(der_len);
-	if(!der_buf) return -1;
-	p = der_buf;
-	i2d_ASN1_TYPE(&t, &p);
-	outlen = do_hex_dump(io_ch, arg, der_buf, der_len);
-	OPENSSL_free(der_buf);
-	if(outlen < 0) return -1;
-	return outlen + 1;
-}
-
-/* Lookup table to convert tags to character widths,
- * 0 = UTF8 encoded, -1 is used for non string types
- * otherwise it is the number of bytes per character
- */
-
-static const signed char tag2nbyte[] = {
-	-1, -1, -1, -1, -1,	/* 0-4 */
-	-1, -1, -1, -1, -1,	/* 5-9 */
-	-1, -1, 0, -1,		/* 10-13 */
-	-1, -1, -1, -1,		/* 15-17 */
-	-1, 1, 1,		/* 18-20 */
-	-1, 1, 1, 1,		/* 21-24 */
-	-1, 1, -1,		/* 25-27 */
-	4, -1, 2		/* 28-30 */
-};
-
-#define ESC_FLAGS (ASN1_STRFLGS_ESC_2253 | \
-		  ASN1_STRFLGS_ESC_QUOTE | \
-		  ASN1_STRFLGS_ESC_CTRL | \
-		  ASN1_STRFLGS_ESC_MSB)
-
-/* This is the main function, print out an
- * ASN1_STRING taking note of various escape
- * and display options. Returns number of
- * characters written or -1 if an error
- * occurred.
- */
-
-static int do_print_ex(char_io *io_ch, void *arg, unsigned long lflags, ASN1_STRING *str)
-{
-	int outlen, len;
-	int type;
-	char quotes;
-	unsigned char flags;
-	quotes = 0;
-	/* Keep a copy of escape flags */
-	flags = (unsigned char)(lflags & ESC_FLAGS);
-
-	type = str->type;
-
-	outlen = 0;
-
-
-	if(lflags & ASN1_STRFLGS_SHOW_TYPE) {
-		const char *tagname;
-		tagname = ASN1_tag2str(type);
-		outlen += strlen(tagname);
-		if(!io_ch(arg, tagname, outlen) || !io_ch(arg, ":", 1)) return -1; 
-		outlen++;
-	}
-
-	/* Decide what to do with type, either dump content or display it */
-
-	/* Dump everything */
-	if(lflags & ASN1_STRFLGS_DUMP_ALL) type = -1;
-	/* Ignore the string type */
-	else if(lflags & ASN1_STRFLGS_IGNORE_TYPE) type = 1;
-	else {
-		/* Else determine width based on type */
-		if((type > 0) && (type < 31)) type = tag2nbyte[type];
-		else type = -1;
-		if((type == -1) && !(lflags & ASN1_STRFLGS_DUMP_UNKNOWN)) type = 1;
-	}
-
-	if(type == -1) {
-		len = do_dump(lflags, io_ch, arg, str);
-		if(len < 0) return -1;
-		outlen += len;
-		return outlen;
-	}
-
-	if(lflags & ASN1_STRFLGS_UTF8_CONVERT) {
-		/* Note: if string is UTF8 and we want
-		 * to convert to UTF8 then we just interpret
-		 * it as 1 byte per character to avoid converting
-		 * twice.
-		 */
-		if(!type) type = 1;
-		else type |= BUF_TYPE_CONVUTF8;
-	}
-
-	len = do_buf(str->data, str->length, type, flags, &quotes, io_ch, NULL);
-	if(len < 0) return -1;
-	outlen += len;
-	if(quotes) outlen += 2;
-	if(!arg) return outlen;
-	if(quotes && !io_ch(arg, "\"", 1)) return -1;
-	if(do_buf(str->data, str->length, type, flags, NULL, io_ch, arg) < 0)
-		return -1;
-	if(quotes && !io_ch(arg, "\"", 1)) return -1;
-	return outlen;
-}
-
-/* Used for line indenting: print 'indent' spaces */
-
-static int do_indent(char_io *io_ch, void *arg, int indent)
-{
-	int i;
-	for(i = 0; i < indent; i++)
-			if(!io_ch(arg, " ", 1)) return 0;
-	return 1;
-}
-
-#define FN_WIDTH_LN	25
-#define FN_WIDTH_SN	10
-
-static int do_name_ex(char_io *io_ch, void *arg, X509_NAME *n,
-				int indent, unsigned long flags)
-{
-	int i, prev = -1, orflags, cnt;
-	int fn_opt, fn_nid;
-	ASN1_OBJECT *fn;
-	ASN1_STRING *val;
-	X509_NAME_ENTRY *ent;
-	char objtmp[80];
-	const char *objbuf;
-	int outlen, len;
-	char *sep_dn, *sep_mv, *sep_eq;
-	int sep_dn_len, sep_mv_len, sep_eq_len;
-	if(indent < 0) indent = 0;
-	outlen = indent;
-	if(!do_indent(io_ch, arg, indent)) return -1;
-	switch (flags & XN_FLAG_SEP_MASK)
-	{
-		case XN_FLAG_SEP_MULTILINE:
-		sep_dn = "\n";
-		sep_dn_len = 1;
-		sep_mv = " + ";
-		sep_mv_len = 3;
-		break;
-
-		case XN_FLAG_SEP_COMMA_PLUS:
-		sep_dn = ",";
-		sep_dn_len = 1;
-		sep_mv = "+";
-		sep_mv_len = 1;
-		indent = 0;
-		break;
-
-		case XN_FLAG_SEP_CPLUS_SPC:
-		sep_dn = ", ";
-		sep_dn_len = 2;
-		sep_mv = " + ";
-		sep_mv_len = 3;
-		indent = 0;
-		break;
-
-		case XN_FLAG_SEP_SPLUS_SPC:
-		sep_dn = "; ";
-		sep_dn_len = 2;
-		sep_mv = " + ";
-		sep_mv_len = 3;
-		indent = 0;
-		break;
-
-		default:
-		return -1;
-	}
-
-	if(flags & XN_FLAG_SPC_EQ) {
-		sep_eq = " = ";
-		sep_eq_len = 3;
-	} else {
-		sep_eq = "=";
-		sep_eq_len = 1;
-	}
-
-	fn_opt = flags & XN_FLAG_FN_MASK;
-
-	cnt = X509_NAME_entry_count(n);	
-	for(i = 0; i < cnt; i++) {
-		if(flags & XN_FLAG_DN_REV)
-				ent = X509_NAME_get_entry(n, cnt - i - 1);
-		else ent = X509_NAME_get_entry(n, i);
-		if(prev != -1) {
-			if(prev == ent->set) {
-				if(!io_ch(arg, sep_mv, sep_mv_len)) return -1;
-				outlen += sep_mv_len;
-			} else {
-				if(!io_ch(arg, sep_dn, sep_dn_len)) return -1;
-				outlen += sep_dn_len;
-				if(!do_indent(io_ch, arg, indent)) return -1;
-				outlen += indent;
-			}
-		}
-		prev = ent->set;
-		fn = X509_NAME_ENTRY_get_object(ent);
-		val = X509_NAME_ENTRY_get_data(ent);
-		fn_nid = OBJ_obj2nid(fn);
-		if(fn_opt != XN_FLAG_FN_NONE) {
-			int objlen, fld_len;
-			if((fn_opt == XN_FLAG_FN_OID) || (fn_nid==NID_undef) ) {
-				OBJ_obj2txt(objtmp, sizeof objtmp, fn, 1);
-				fld_len = 0; /* XXX: what should this be? */
-				objbuf = objtmp;
-			} else {
-				if(fn_opt == XN_FLAG_FN_SN) {
-					fld_len = FN_WIDTH_SN;
-					objbuf = OBJ_nid2sn(fn_nid);
-				} else if(fn_opt == XN_FLAG_FN_LN) {
-					fld_len = FN_WIDTH_LN;
-					objbuf = OBJ_nid2ln(fn_nid);
-				} else {
-					fld_len = 0; /* XXX: what should this be? */
-					objbuf = "";
-				}
-			}
-			objlen = strlen(objbuf);
-			if(!io_ch(arg, objbuf, objlen)) return -1;
-			if ((objlen < fld_len) && (flags & XN_FLAG_FN_ALIGN)) {
-				if (!do_indent(io_ch, arg, fld_len - objlen)) return -1;
-				outlen += fld_len - objlen;
-			}
-			if(!io_ch(arg, sep_eq, sep_eq_len)) return -1;
-			outlen += objlen + sep_eq_len;
-		}
-		/* If the field name is unknown then fix up the DER dump
-		 * flag. We might want to limit this further so it will
- 		 * DER dump on anything other than a few 'standard' fields.
-		 */
-		if((fn_nid == NID_undef) && (flags & XN_FLAG_DUMP_UNKNOWN_FIELDS)) 
-					orflags = ASN1_STRFLGS_DUMP_ALL;
-		else orflags = 0;
-     
-		len = do_print_ex(io_ch, arg, flags | orflags, val);
-		if(len < 0) return -1;
-		outlen += len;
-	}
-	return outlen;
-}
-
-/* Wrappers round the main functions */
-
-int X509_NAME_print_ex(BIO *out, X509_NAME *nm, int indent, unsigned long flags)
-{
-	if(flags == XN_FLAG_COMPAT)
-		return X509_NAME_print(out, nm, indent);
-	return do_name_ex(send_bio_chars, out, nm, indent, flags);
-}
-
-#ifndef OPENSSL_NO_FP_API
-int X509_NAME_print_ex_fp(FILE *fp, X509_NAME *nm, int indent, unsigned long flags)
-{
-	if(flags == XN_FLAG_COMPAT)
-		{
-		BIO *btmp;
-		int ret;
-		btmp = BIO_new_fp(fp, BIO_NOCLOSE);
-		if(!btmp) return -1;
-		ret = X509_NAME_print(btmp, nm, indent);
-		BIO_free(btmp);
-		return ret;
-		}
-	return do_name_ex(send_fp_chars, fp, nm, indent, flags);
-}
-#endif
-
-int ASN1_STRING_print_ex(BIO *out, ASN1_STRING *str, unsigned long flags)
-{
-	return do_print_ex(send_bio_chars, out, flags, str);
-}
-
-#ifndef OPENSSL_NO_FP_API
-int ASN1_STRING_print_ex_fp(FILE *fp, ASN1_STRING *str, unsigned long flags)
-{
-	return do_print_ex(send_fp_chars, fp, flags, str);
-}
-#endif
-
-/* Utility function: convert any string type to UTF8, returns number of bytes
- * in output string or a negative error code
- */
-
-int ASN1_STRING_to_UTF8(unsigned char **out, ASN1_STRING *in)
-{
-	ASN1_STRING stmp, *str = &stmp;
-	int mbflag, type, ret;
-	if(!in) return -1;
-	type = in->type;
-	if((type < 0) || (type > 30)) return -1;
-	mbflag = tag2nbyte[type];
-	if(mbflag == -1) return -1;
-	mbflag |= MBSTRING_FLAG;
-	stmp.data = NULL;
-	ret = ASN1_mbstring_copy(&str, in->data, in->length, mbflag, B_ASN1_UTF8STRING);
-	if(ret < 0) return ret;
-	*out = stmp.data;
-	return stmp.length;
-}
diff --git a/crypto/openssl/crypto/asn1/a_strnid.c b/crypto/openssl/crypto/asn1/a_strnid.c
deleted file mode 100644
index 613bbc4a7da9..000000000000
--- a/crypto/openssl/crypto/asn1/a_strnid.c
+++ /dev/null
@@ -1,290 +0,0 @@
-/* a_strnid.c */
-/* Written by Dr Stephen N Henson (shenson@bigfoot.com) for the OpenSSL
- * project 1999.
- */
-/* ====================================================================
- * Copyright (c) 1999 The OpenSSL Project.  All rights reserved.
- *
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions
- * are met:
- *
- * 1. Redistributions of source code must retain the above copyright
- *    notice, this list of conditions and the following disclaimer. 
- *
- * 2. Redistributions in binary form must reproduce the above copyright
- *    notice, this list of conditions and the following disclaimer in
- *    the documentation and/or other materials provided with the
- *    distribution.
- *
- * 3. All advertising materials mentioning features or use of this
- *    software must display the following acknowledgment:
- *    "This product includes software developed by the OpenSSL Project
- *    for use in the OpenSSL Toolkit. (http://www.OpenSSL.org/)"
- *
- * 4. The names "OpenSSL Toolkit" and "OpenSSL Project" must not be used to
- *    endorse or promote products derived from this software without
- *    prior written permission. For written permission, please contact
- *    licensing@OpenSSL.org.
- *
- * 5. Products derived from this software may not be called "OpenSSL"
- *    nor may "OpenSSL" appear in their names without prior written
- *    permission of the OpenSSL Project.
- *
- * 6. Redistributions of any form whatsoever must retain the following
- *    acknowledgment:
- *    "This product includes software developed by the OpenSSL Project
- *    for use in the OpenSSL Toolkit (http://www.OpenSSL.org/)"
- *
- * THIS SOFTWARE IS PROVIDED BY THE OpenSSL PROJECT ``AS IS'' AND ANY
- * EXPRESSED OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
- * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR
- * PURPOSE ARE DISCLAIMED.  IN NO EVENT SHALL THE OpenSSL PROJECT OR
- * ITS CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
- * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
- * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
- * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
- * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
- * STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
- * ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED
- * OF THE POSSIBILITY OF SUCH DAMAGE.
- * ====================================================================
- *
- * This product includes cryptographic software written by Eric Young
- * (eay@cryptsoft.com).  This product includes software written by Tim
- * Hudson (tjh@cryptsoft.com).
- *
- */
-
-#include <stdio.h>
-#include <ctype.h>
-#include "cryptlib.h"
-#include <openssl/asn1.h>
-#include <openssl/objects.h>
-
-
-static STACK_OF(ASN1_STRING_TABLE) *stable = NULL;
-static void st_free(ASN1_STRING_TABLE *tbl);
-static int sk_table_cmp(const ASN1_STRING_TABLE * const *a,
-			const ASN1_STRING_TABLE * const *b);
-static int table_cmp(const void *a, const void *b);
-
-
-/* This is the global mask for the mbstring functions: this is use to
- * mask out certain types (such as BMPString and UTF8String) because
- * certain software (e.g. Netscape) has problems with them.
- */
-
-static unsigned long global_mask = 0xFFFFFFFFL;
-
-void ASN1_STRING_set_default_mask(unsigned long mask)
-{
-	global_mask = mask;
-}
-
-unsigned long ASN1_STRING_get_default_mask(void)
-{
-	return global_mask;
-}
-
-/* This function sets the default to various "flavours" of configuration.
- * based on an ASCII string. Currently this is:
- * MASK:XXXX : a numerical mask value.
- * nobmp : Don't use BMPStrings (just Printable, T61).
- * pkix : PKIX recommendation in RFC2459.
- * utf8only : only use UTF8Strings (RFC2459 recommendation for 2004).
- * default:   the default value, Printable, T61, BMP.
- */
-
-int ASN1_STRING_set_default_mask_asc(char *p)
-{
-	unsigned long mask;
-	char *end;
-	if(!strncmp(p, "MASK:", 5)) {
-		if(!p[5]) return 0;
-		mask = strtoul(p + 5, &end, 0);
-		if(*end) return 0;
-	} else if(!strcmp(p, "nombstr"))
-			 mask = ~((unsigned long)(B_ASN1_BMPSTRING|B_ASN1_UTF8STRING));
-	else if(!strcmp(p, "pkix"))
-			mask = ~((unsigned long)B_ASN1_T61STRING);
-	else if(!strcmp(p, "utf8only")) mask = B_ASN1_UTF8STRING;
-	else if(!strcmp(p, "default"))
-	    mask = 0xFFFFFFFFL;
-	else return 0;
-	ASN1_STRING_set_default_mask(mask);
-	return 1;
-}
-
-/* The following function generates an ASN1_STRING based on limits in a table.
- * Frequently the types and length of an ASN1_STRING are restricted by a 
- * corresponding OID. For example certificates and certificate requests.
- */
-
-ASN1_STRING *ASN1_STRING_set_by_NID(ASN1_STRING **out, const unsigned char *in,
-					int inlen, int inform, int nid)
-{
-	ASN1_STRING_TABLE *tbl;
-	ASN1_STRING *str = NULL;
-	unsigned long mask;
-	int ret;
-	if(!out) out = &str;
-	tbl = ASN1_STRING_TABLE_get(nid);
-	if(tbl) {
-		mask = tbl->mask;
-		if(!(tbl->flags & STABLE_NO_MASK)) mask &= global_mask;
-		ret = ASN1_mbstring_ncopy(out, in, inlen, inform, mask,
-					tbl->minsize, tbl->maxsize);
-	} else ret = ASN1_mbstring_copy(out, in, inlen, inform, DIRSTRING_TYPE & global_mask);
-	if(ret <= 0) return NULL;
-	return *out;
-}
-
-/* Now the tables and helper functions for the string table:
- */
-
-/* size limits: this stuff is taken straight from RFC3280 */
-
-#define ub_name				32768
-#define ub_common_name			64
-#define ub_locality_name		128
-#define ub_state_name			128
-#define ub_organization_name		64
-#define ub_organization_unit_name	64
-#define ub_title			64
-#define ub_email_address		128
-#define ub_serial_number		64
-
-
-/* This table must be kept in NID order */
-
-static ASN1_STRING_TABLE tbl_standard[] = {
-{NID_commonName,		1, ub_common_name, DIRSTRING_TYPE, 0},
-{NID_countryName,		2, 2, B_ASN1_PRINTABLESTRING, STABLE_NO_MASK},
-{NID_localityName,		1, ub_locality_name, DIRSTRING_TYPE, 0},
-{NID_stateOrProvinceName,	1, ub_state_name, DIRSTRING_TYPE, 0},
-{NID_organizationName,		1, ub_organization_name, DIRSTRING_TYPE, 0},
-{NID_organizationalUnitName,	1, ub_organization_unit_name, DIRSTRING_TYPE, 0},
-{NID_pkcs9_emailAddress,	1, ub_email_address, B_ASN1_IA5STRING, STABLE_NO_MASK},
-{NID_pkcs9_unstructuredName,	1, -1, PKCS9STRING_TYPE, 0},
-{NID_pkcs9_challengePassword,	1, -1, PKCS9STRING_TYPE, 0},
-{NID_pkcs9_unstructuredAddress,	1, -1, DIRSTRING_TYPE, 0},
-{NID_givenName,			1, ub_name, DIRSTRING_TYPE, 0},
-{NID_surname,			1, ub_name, DIRSTRING_TYPE, 0},
-{NID_initials,			1, ub_name, DIRSTRING_TYPE, 0},
-{NID_serialNumber,		1, ub_serial_number, B_ASN1_PRINTABLESTRING, STABLE_NO_MASK},
-{NID_friendlyName,		-1, -1, B_ASN1_BMPSTRING, STABLE_NO_MASK},
-{NID_name,			1, ub_name, DIRSTRING_TYPE, 0},
-{NID_dnQualifier,		-1, -1, B_ASN1_PRINTABLESTRING, STABLE_NO_MASK},
-{NID_domainComponent,		1, -1, B_ASN1_IA5STRING, STABLE_NO_MASK},
-{NID_ms_csp_name,		-1, -1, B_ASN1_BMPSTRING, STABLE_NO_MASK}
-};
-
-static int sk_table_cmp(const ASN1_STRING_TABLE * const *a,
-			const ASN1_STRING_TABLE * const *b)
-{
-	return (*a)->nid - (*b)->nid;
-}
-
-static int table_cmp(const void *a, const void *b)
-{
-	const ASN1_STRING_TABLE *sa = a, *sb = b;
-	return sa->nid - sb->nid;
-}
-
-ASN1_STRING_TABLE *ASN1_STRING_TABLE_get(int nid)
-{
-	int idx;
-	ASN1_STRING_TABLE *ttmp;
-	ASN1_STRING_TABLE fnd;
-	fnd.nid = nid;
-	ttmp = (ASN1_STRING_TABLE *) OBJ_bsearch((char *)&fnd,
-					(char *)tbl_standard, 
-			sizeof(tbl_standard)/sizeof(ASN1_STRING_TABLE),
-			sizeof(ASN1_STRING_TABLE), table_cmp);
-	if(ttmp) return ttmp;
-	if(!stable) return NULL;
-	idx = sk_ASN1_STRING_TABLE_find(stable, &fnd);
-	if(idx < 0) return NULL;
-	return sk_ASN1_STRING_TABLE_value(stable, idx);
-}
-	
-int ASN1_STRING_TABLE_add(int nid,
-		 long minsize, long maxsize, unsigned long mask,
-				unsigned long flags)
-{
-	ASN1_STRING_TABLE *tmp;
-	char new_nid = 0;
-	flags &= ~STABLE_FLAGS_MALLOC;
-	if(!stable) stable = sk_ASN1_STRING_TABLE_new(sk_table_cmp);
-	if(!stable) {
-		ASN1err(ASN1_F_ASN1_STRING_TABLE_ADD, ERR_R_MALLOC_FAILURE);
-		return 0;
-	}
-	if(!(tmp = ASN1_STRING_TABLE_get(nid))) {
-		tmp = OPENSSL_malloc(sizeof(ASN1_STRING_TABLE));
-		if(!tmp) {
-			ASN1err(ASN1_F_ASN1_STRING_TABLE_ADD,
-							ERR_R_MALLOC_FAILURE);
-			return 0;
-		}
-		tmp->flags = flags | STABLE_FLAGS_MALLOC;
-		tmp->nid = nid;
-		new_nid = 1;
-	} else tmp->flags = (tmp->flags & STABLE_FLAGS_MALLOC) | flags;
-	if(minsize != -1) tmp->minsize = minsize;
-	if(maxsize != -1) tmp->maxsize = maxsize;
-	tmp->mask = mask;
-	if(new_nid) sk_ASN1_STRING_TABLE_push(stable, tmp);
-	return 1;
-}
-
-void ASN1_STRING_TABLE_cleanup(void)
-{
-	STACK_OF(ASN1_STRING_TABLE) *tmp;
-	tmp = stable;
-	if(!tmp) return;
-	stable = NULL;
-	sk_ASN1_STRING_TABLE_pop_free(tmp, st_free);
-}
-
-static void st_free(ASN1_STRING_TABLE *tbl)
-{
-	if(tbl->flags & STABLE_FLAGS_MALLOC) OPENSSL_free(tbl);
-}
-
-
-IMPLEMENT_STACK_OF(ASN1_STRING_TABLE)
-
-#ifdef STRING_TABLE_TEST
-
-main()
-{
-	ASN1_STRING_TABLE *tmp;
-	int i, last_nid = -1;
-
-	for (tmp = tbl_standard, i = 0;
-		i < sizeof(tbl_standard)/sizeof(ASN1_STRING_TABLE); i++, tmp++)
-		{
-			if (tmp->nid < last_nid)
-				{
-				last_nid = 0;
-				break;
-				}
-			last_nid = tmp->nid;
-		}
-
-	if (last_nid != 0)
-		{
-		printf("Table order OK\n");
-		exit(0);
-		}
-
-	for (tmp = tbl_standard, i = 0;
-		i < sizeof(tbl_standard)/sizeof(ASN1_STRING_TABLE); i++, tmp++)
-			printf("Index %d, NID %d, Name=%s\n", i, tmp->nid,
-							OBJ_nid2ln(tmp->nid));
-
-}
-
-#endif
diff --git a/crypto/openssl/crypto/asn1/a_time.c b/crypto/openssl/crypto/asn1/a_time.c
deleted file mode 100644
index 159681fbcb06..000000000000
--- a/crypto/openssl/crypto/asn1/a_time.c
+++ /dev/null
@@ -1,164 +0,0 @@
-/* crypto/asn1/a_time.c */
-/* ====================================================================
- * Copyright (c) 1999 The OpenSSL Project.  All rights reserved.
- *
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions
- * are met:
- *
- * 1. Redistributions of source code must retain the above copyright
- *    notice, this list of conditions and the following disclaimer. 
- *
- * 2. Redistributions in binary form must reproduce the above copyright
- *    notice, this list of conditions and the following disclaimer in
- *    the documentation and/or other materials provided with the
- *    distribution.
- *
- * 3. All advertising materials mentioning features or use of this
- *    software must display the following acknowledgment:
- *    "This product includes software developed by the OpenSSL Project
- *    for use in the OpenSSL Toolkit. (http://www.OpenSSL.org/)"
- *
- * 4. The names "OpenSSL Toolkit" and "OpenSSL Project" must not be used to
- *    endorse or promote products derived from this software without
- *    prior written permission. For written permission, please contact
- *    licensing@OpenSSL.org.
- *
- * 5. Products derived from this software may not be called "OpenSSL"
- *    nor may "OpenSSL" appear in their names without prior written
- *    permission of the OpenSSL Project.
- *
- * 6. Redistributions of any form whatsoever must retain the following
- *    acknowledgment:
- *    "This product includes software developed by the OpenSSL Project
- *    for use in the OpenSSL Toolkit (http://www.OpenSSL.org/)"
- *
- * THIS SOFTWARE IS PROVIDED BY THE OpenSSL PROJECT ``AS IS'' AND ANY
- * EXPRESSED OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
- * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR
- * PURPOSE ARE DISCLAIMED.  IN NO EVENT SHALL THE OpenSSL PROJECT OR
- * ITS CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
- * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
- * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
- * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
- * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
- * STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
- * ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED
- * OF THE POSSIBILITY OF SUCH DAMAGE.
- * ====================================================================
- *
- * This product includes cryptographic software written by Eric Young
- * (eay@cryptsoft.com).  This product includes software written by Tim
- * Hudson (tjh@cryptsoft.com).
- *
- */
-
-
-/* This is an implementation of the ASN1 Time structure which is:
- *    Time ::= CHOICE {
- *      utcTime        UTCTime,
- *      generalTime    GeneralizedTime }
- * written by Steve Henson.
- */
-
-#include <stdio.h>
-#include <time.h>
-#include "cryptlib.h"
-#include "o_time.h"
-#include <openssl/asn1t.h>
-
-IMPLEMENT_ASN1_MSTRING(ASN1_TIME, B_ASN1_TIME)
-
-IMPLEMENT_ASN1_FUNCTIONS(ASN1_TIME)
-
-#if 0
-int i2d_ASN1_TIME(ASN1_TIME *a, unsigned char **pp)
-	{
-#ifdef CHARSET_EBCDIC
-	/* KLUDGE! We convert to ascii before writing DER */
-	char tmp[24];
-	ASN1_STRING tmpstr;
-
-	if(a->type == V_ASN1_UTCTIME || a->type == V_ASN1_GENERALIZEDTIME) {
-	    int len;
-
-	    tmpstr = *(ASN1_STRING *)a;
-	    len = tmpstr.length;
-	    ebcdic2ascii(tmp, tmpstr.data, (len >= sizeof tmp) ? sizeof tmp : len);
-	    tmpstr.data = tmp;
-	    a = (ASN1_GENERALIZEDTIME *) &tmpstr;
-	}
-#endif
-	if(a->type == V_ASN1_UTCTIME || a->type == V_ASN1_GENERALIZEDTIME)
-				return(i2d_ASN1_bytes((ASN1_STRING *)a,pp,
-				     a->type ,V_ASN1_UNIVERSAL));
-	ASN1err(ASN1_F_I2D_ASN1_TIME,ASN1_R_EXPECTING_A_TIME);
-	return -1;
-	}
-#endif
-
-
-ASN1_TIME *ASN1_TIME_set(ASN1_TIME *s, time_t t)
-	{
-	struct tm *ts;
-	struct tm data;
-
-	ts=OPENSSL_gmtime(&t,&data);
-	if (ts == NULL)
-		{
-		ASN1err(ASN1_F_ASN1_TIME_SET, ASN1_R_ERROR_GETTING_TIME);
-		return NULL;
-		}
-	if((ts->tm_year >= 50) && (ts->tm_year < 150))
-					return ASN1_UTCTIME_set(s, t);
-	return ASN1_GENERALIZEDTIME_set(s,t);
-	}
-
-int ASN1_TIME_check(ASN1_TIME *t)
-	{
-	if (t->type == V_ASN1_GENERALIZEDTIME)
-		return ASN1_GENERALIZEDTIME_check(t);
-	else if (t->type == V_ASN1_UTCTIME)
-		return ASN1_UTCTIME_check(t);
-	return 0;
-	}
-
-/* Convert an ASN1_TIME structure to GeneralizedTime */
-ASN1_GENERALIZEDTIME *ASN1_TIME_to_generalizedtime(ASN1_TIME *t, ASN1_GENERALIZEDTIME **out)
-	{
-	ASN1_GENERALIZEDTIME *ret;
-	char *str;
-	int newlen;
-
-	if (!ASN1_TIME_check(t)) return NULL;
-
-	if (!out || !*out)
-		{
-		if (!(ret = ASN1_GENERALIZEDTIME_new ()))
-			return NULL;
-		if (out) *out = ret;
-		}
-	else ret = *out;
-
-	/* If already GeneralizedTime just copy across */
-	if (t->type == V_ASN1_GENERALIZEDTIME)
-		{
-		if(!ASN1_STRING_set(ret, t->data, t->length))
-			return NULL;
-		return ret;
-		}
-
-	/* grow the string */
-	if (!ASN1_STRING_set(ret, NULL, t->length + 2))
-		return NULL;
-	/* ASN1_STRING_set() allocated 'len + 1' bytes. */
-	newlen = t->length + 2 + 1;
-	str = (char *)ret->data;
-	/* Work out the century and prepend */
-	if (t->data[0] >= '5') BUF_strlcpy(str, "19", newlen);
-	else BUF_strlcpy(str, "20", newlen);
-
-	BUF_strlcat(str, (char *)t->data, newlen);
-
-	return ret;
-	}
diff --git a/crypto/openssl/crypto/asn1/a_type.c b/crypto/openssl/crypto/asn1/a_type.c
deleted file mode 100644
index a6acef16f3b3..000000000000
--- a/crypto/openssl/crypto/asn1/a_type.c
+++ /dev/null
@@ -1,84 +0,0 @@
-/* crypto/asn1/a_type.c */
-/* Copyright (C) 1995-1998 Eric Young (eay@cryptsoft.com)
- * All rights reserved.
- *
- * This package is an SSL implementation written
- * by Eric Young (eay@cryptsoft.com).
- * The implementation was written so as to conform with Netscapes SSL.
- * 
- * This library is free for commercial and non-commercial use as long as
- * the following conditions are aheared to.  The following conditions
- * apply to all code found in this distribution, be it the RC4, RSA,
- * lhash, DES, etc., code; not just the SSL code.  The SSL documentation
- * included with this distribution is covered by the same copyright terms
- * except that the holder is Tim Hudson (tjh@cryptsoft.com).
- * 
- * Copyright remains Eric Young's, and as such any Copyright notices in
- * the code are not to be removed.
- * If this package is used in a product, Eric Young should be given attribution
- * as the author of the parts of the library used.
- * This can be in the form of a textual message at program startup or
- * in documentation (online or textual) provided with the package.
- * 
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions
- * are met:
- * 1. Redistributions of source code must retain the copyright
- *    notice, this list of conditions and the following disclaimer.
- * 2. Redistributions in binary form must reproduce the above copyright
- *    notice, this list of conditions and the following disclaimer in the
- *    documentation and/or other materials provided with the distribution.
- * 3. All advertising materials mentioning features or use of this software
- *    must display the following acknowledgement:
- *    "This product includes cryptographic software written by
- *     Eric Young (eay@cryptsoft.com)"
- *    The word 'cryptographic' can be left out if the rouines from the library
- *    being used are not cryptographic related :-).
- * 4. If you include any Windows specific code (or a derivative thereof) from 
- *    the apps directory (application code) you must include an acknowledgement:
- *    "This product includes software written by Tim Hudson (tjh@cryptsoft.com)"
- * 
- * THIS SOFTWARE IS PROVIDED BY ERIC YOUNG ``AS IS'' AND
- * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
- * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
- * ARE DISCLAIMED.  IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE
- * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
- * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
- * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
- * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
- * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
- * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
- * SUCH DAMAGE.
- * 
- * The licence and distribution terms for any publically available version or
- * derivative of this code cannot be changed.  i.e. this code cannot simply be
- * copied and put under another distribution licence
- * [including the GNU Public Licence.]
- */
-
-#include <stdio.h>
-#include "cryptlib.h"
-#include <openssl/asn1t.h>
-
-int ASN1_TYPE_get(ASN1_TYPE *a)
-	{
-	if ((a->value.ptr != NULL) || (a->type == V_ASN1_NULL))
-		return(a->type);
-	else
-		return(0);
-	}
-
-void ASN1_TYPE_set(ASN1_TYPE *a, int type, void *value)
-	{
-	if (a->value.ptr != NULL)
-		{
-		ASN1_TYPE **tmp_a = &a;
-		ASN1_primitive_free((ASN1_VALUE **)tmp_a, NULL);
-		}
-	a->type=type;
-	a->value.ptr=value;
-	}
-
-
-IMPLEMENT_STACK_OF(ASN1_TYPE)
-IMPLEMENT_ASN1_SET_OF(ASN1_TYPE)
diff --git a/crypto/openssl/crypto/asn1/a_utctm.c b/crypto/openssl/crypto/asn1/a_utctm.c
deleted file mode 100644
index d31c0281930b..000000000000
--- a/crypto/openssl/crypto/asn1/a_utctm.c
+++ /dev/null
@@ -1,303 +0,0 @@
-/* crypto/asn1/a_utctm.c */
-/* Copyright (C) 1995-1998 Eric Young (eay@cryptsoft.com)
- * All rights reserved.
- *
- * This package is an SSL implementation written
- * by Eric Young (eay@cryptsoft.com).
- * The implementation was written so as to conform with Netscapes SSL.
- * 
- * This library is free for commercial and non-commercial use as long as
- * the following conditions are aheared to.  The following conditions
- * apply to all code found in this distribution, be it the RC4, RSA,
- * lhash, DES, etc., code; not just the SSL code.  The SSL documentation
- * included with this distribution is covered by the same copyright terms
- * except that the holder is Tim Hudson (tjh@cryptsoft.com).
- * 
- * Copyright remains Eric Young's, and as such any Copyright notices in
- * the code are not to be removed.
- * If this package is used in a product, Eric Young should be given attribution
- * as the author of the parts of the library used.
- * This can be in the form of a textual message at program startup or
- * in documentation (online or textual) provided with the package.
- * 
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions
- * are met:
- * 1. Redistributions of source code must retain the copyright
- *    notice, this list of conditions and the following disclaimer.
- * 2. Redistributions in binary form must reproduce the above copyright
- *    notice, this list of conditions and the following disclaimer in the
- *    documentation and/or other materials provided with the distribution.
- * 3. All advertising materials mentioning features or use of this software
- *    must display the following acknowledgement:
- *    "This product includes cryptographic software written by
- *     Eric Young (eay@cryptsoft.com)"
- *    The word 'cryptographic' can be left out if the rouines from the library
- *    being used are not cryptographic related :-).
- * 4. If you include any Windows specific code (or a derivative thereof) from 
- *    the apps directory (application code) you must include an acknowledgement:
- *    "This product includes software written by Tim Hudson (tjh@cryptsoft.com)"
- * 
- * THIS SOFTWARE IS PROVIDED BY ERIC YOUNG ``AS IS'' AND
- * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
- * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
- * ARE DISCLAIMED.  IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE
- * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
- * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
- * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
- * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
- * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
- * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
- * SUCH DAMAGE.
- * 
- * The licence and distribution terms for any publically available version or
- * derivative of this code cannot be changed.  i.e. this code cannot simply be
- * copied and put under another distribution licence
- * [including the GNU Public Licence.]
- */
-
-#include <stdio.h>
-#include <time.h>
-#include "cryptlib.h"
-#include "o_time.h"
-#include <openssl/asn1.h>
-
-#if 0
-int i2d_ASN1_UTCTIME(ASN1_UTCTIME *a, unsigned char **pp)
-	{
-#ifndef CHARSET_EBCDIC
-	return(i2d_ASN1_bytes((ASN1_STRING *)a,pp,
-		V_ASN1_UTCTIME,V_ASN1_UNIVERSAL));
-#else
-	/* KLUDGE! We convert to ascii before writing DER */
-	int len;
-	char tmp[24];
-	ASN1_STRING x = *(ASN1_STRING *)a;
-
-	len = x.length;
-	ebcdic2ascii(tmp, x.data, (len >= sizeof tmp) ? sizeof tmp : len);
-	x.data = tmp;
-	return i2d_ASN1_bytes(&x, pp, V_ASN1_UTCTIME,V_ASN1_UNIVERSAL);
-#endif
-	}
-
-
-ASN1_UTCTIME *d2i_ASN1_UTCTIME(ASN1_UTCTIME **a, unsigned char **pp,
-	     long length)
-	{
-	ASN1_UTCTIME *ret=NULL;
-
-	ret=(ASN1_UTCTIME *)d2i_ASN1_bytes((ASN1_STRING **)a,pp,length,
-		V_ASN1_UTCTIME,V_ASN1_UNIVERSAL);
-	if (ret == NULL)
-		{
-		ASN1err(ASN1_F_D2I_ASN1_UTCTIME,ERR_R_NESTED_ASN1_ERROR);
-		return(NULL);
-		}
-#ifdef CHARSET_EBCDIC
-	ascii2ebcdic(ret->data, ret->data, ret->length);
-#endif
-	if (!ASN1_UTCTIME_check(ret))
-		{
-		ASN1err(ASN1_F_D2I_ASN1_UTCTIME,ASN1_R_INVALID_TIME_FORMAT);
-		goto err;
-		}
-
-	return(ret);
-err:
-	if ((ret != NULL) && ((a == NULL) || (*a != ret)))
-		M_ASN1_UTCTIME_free(ret);
-	return(NULL);
-	}
-
-#endif
-
-int ASN1_UTCTIME_check(ASN1_UTCTIME *d)
-	{
-	static int min[8]={ 0, 1, 1, 0, 0, 0, 0, 0};
-	static int max[8]={99,12,31,23,59,59,12,59};
-	char *a;
-	int n,i,l,o;
-
-	if (d->type != V_ASN1_UTCTIME) return(0);
-	l=d->length;
-	a=(char *)d->data;
-	o=0;
-
-	if (l < 11) goto err;
-	for (i=0; i<6; i++)
-		{
-		if ((i == 5) && ((a[o] == 'Z') ||
-			(a[o] == '+') || (a[o] == '-')))
-			{ i++; break; }
-		if ((a[o] < '0') || (a[o] > '9')) goto err;
-		n= a[o]-'0';
-		if (++o > l) goto err;
-
-		if ((a[o] < '0') || (a[o] > '9')) goto err;
-		n=(n*10)+ a[o]-'0';
-		if (++o > l) goto err;
-
-		if ((n < min[i]) || (n > max[i])) goto err;
-		}
-	if (a[o] == 'Z')
-		o++;
-	else if ((a[o] == '+') || (a[o] == '-'))
-		{
-		o++;
-		if (o+4 > l) goto err;
-		for (i=6; i<8; i++)
-			{
-			if ((a[o] < '0') || (a[o] > '9')) goto err;
-			n= a[o]-'0';
-			o++;
-			if ((a[o] < '0') || (a[o] > '9')) goto err;
-			n=(n*10)+ a[o]-'0';
-			if ((n < min[i]) || (n > max[i])) goto err;
-			o++;
-			}
-		}
-	return(o == l);
-err:
-	return(0);
-	}
-
-int ASN1_UTCTIME_set_string(ASN1_UTCTIME *s, const char *str)
-	{
-	ASN1_UTCTIME t;
-
-	t.type=V_ASN1_UTCTIME;
-	t.length=strlen(str);
-	t.data=(unsigned char *)str;
-	if (ASN1_UTCTIME_check(&t))
-		{
-		if (s != NULL)
-			{
-			if (!ASN1_STRING_set((ASN1_STRING *)s,
-				(unsigned char *)str,t.length))
-				return 0;
-			s->type = V_ASN1_UTCTIME;
-			}
-		return(1);
-		}
-	else
-		return(0);
-	}
-
-ASN1_UTCTIME *ASN1_UTCTIME_set(ASN1_UTCTIME *s, time_t t)
-	{
-	char *p;
-	struct tm *ts;
-	struct tm data;
-	size_t len = 20;
-
-	if (s == NULL)
-		s=M_ASN1_UTCTIME_new();
-	if (s == NULL)
-		return(NULL);
-
-	ts=OPENSSL_gmtime(&t, &data);
-	if (ts == NULL)
-		return(NULL);
-
-	p=(char *)s->data;
-	if ((p == NULL) || ((size_t)s->length < len))
-		{
-		p=OPENSSL_malloc(len);
-		if (p == NULL)
-			{
-			ASN1err(ASN1_F_ASN1_UTCTIME_SET,ERR_R_MALLOC_FAILURE);
-			return(NULL);
-			}
-		if (s->data != NULL)
-			OPENSSL_free(s->data);
-		s->data=(unsigned char *)p;
-		}
-
-	BIO_snprintf(p,len,"%02d%02d%02d%02d%02d%02dZ",ts->tm_year%100,
-		     ts->tm_mon+1,ts->tm_mday,ts->tm_hour,ts->tm_min,ts->tm_sec);
-	s->length=strlen(p);
-	s->type=V_ASN1_UTCTIME;
-#ifdef CHARSET_EBCDIC_not
-	ebcdic2ascii(s->data, s->data, s->length);
-#endif
-	return(s);
-	}
-
-
-int ASN1_UTCTIME_cmp_time_t(const ASN1_UTCTIME *s, time_t t)
-	{
-	struct tm *tm;
-	struct tm data;
-	int offset;
-	int year;
-
-#define g2(p) (((p)[0]-'0')*10+(p)[1]-'0')
-
-	if (s->data[12] == 'Z')
-		offset=0;
-	else
-		{
-		offset = g2(s->data+13)*60+g2(s->data+15);
-		if (s->data[12] == '-')
-			offset = -offset;
-		}
-
-	t -= offset*60; /* FIXME: may overflow in extreme cases */
-
-	tm = OPENSSL_gmtime(&t, &data);
-	
-#define return_cmp(a,b) if ((a)<(b)) return -1; else if ((a)>(b)) return 1
-	year = g2(s->data);
-	if (year < 50)
-		year += 100;
-	return_cmp(year,              tm->tm_year);
-	return_cmp(g2(s->data+2) - 1, tm->tm_mon);
-	return_cmp(g2(s->data+4),     tm->tm_mday);
-	return_cmp(g2(s->data+6),     tm->tm_hour);
-	return_cmp(g2(s->data+8),     tm->tm_min);
-	return_cmp(g2(s->data+10),    tm->tm_sec);
-#undef g2
-#undef return_cmp
-
-	return 0;
-	}
-
-
-#if 0
-time_t ASN1_UTCTIME_get(const ASN1_UTCTIME *s)
-	{
-	struct tm tm;
-	int offset;
-
-	memset(&tm,'\0',sizeof tm);
-
-#define g2(p) (((p)[0]-'0')*10+(p)[1]-'0')
-	tm.tm_year=g2(s->data);
-	if(tm.tm_year < 50)
-		tm.tm_year+=100;
-	tm.tm_mon=g2(s->data+2)-1;
-	tm.tm_mday=g2(s->data+4);
-	tm.tm_hour=g2(s->data+6);
-	tm.tm_min=g2(s->data+8);
-	tm.tm_sec=g2(s->data+10);
-	if(s->data[12] == 'Z')
-		offset=0;
-	else
-		{
-		offset=g2(s->data+13)*60+g2(s->data+15);
-		if(s->data[12] == '-')
-			offset= -offset;
-		}
-#undef g2
-
-	return mktime(&tm)-offset*60; /* FIXME: mktime assumes the current timezone
-	                               * instead of UTC, and unless we rewrite OpenSSL
-				       * in Lisp we cannot locally change the timezone
-				       * without possibly interfering with other parts
-	                               * of the program. timegm, which uses UTC, is
-				       * non-standard.
-	                               * Also time_t is inappropriate for general
-	                               * UTC times because it may a 32 bit type. */
-	}
-#endif
diff --git a/crypto/openssl/crypto/asn1/a_utf8.c b/crypto/openssl/crypto/asn1/a_utf8.c
deleted file mode 100644
index 508e11e527c8..000000000000
--- a/crypto/openssl/crypto/asn1/a_utf8.c
+++ /dev/null
@@ -1,211 +0,0 @@
-/* crypto/asn1/a_utf8.c */
-/* Copyright (C) 1995-1998 Eric Young (eay@cryptsoft.com)
- * All rights reserved.
- *
- * This package is an SSL implementation written
- * by Eric Young (eay@cryptsoft.com).
- * The implementation was written so as to conform with Netscapes SSL.
- * 
- * This library is free for commercial and non-commercial use as long as
- * the following conditions are aheared to.  The following conditions
- * apply to all code found in this distribution, be it the RC4, RSA,
- * lhash, DES, etc., code; not just the SSL code.  The SSL documentation
- * included with this distribution is covered by the same copyright terms
- * except that the holder is Tim Hudson (tjh@cryptsoft.com).
- * 
- * Copyright remains Eric Young's, and as such any Copyright notices in
- * the code are not to be removed.
- * If this package is used in a product, Eric Young should be given attribution
- * as the author of the parts of the library used.
- * This can be in the form of a textual message at program startup or
- * in documentation (online or textual) provided with the package.
- * 
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions
- * are met:
- * 1. Redistributions of source code must retain the copyright
- *    notice, this list of conditions and the following disclaimer.
- * 2. Redistributions in binary form must reproduce the above copyright
- *    notice, this list of conditions and the following disclaimer in the
- *    documentation and/or other materials provided with the distribution.
- * 3. All advertising materials mentioning features or use of this software
- *    must display the following acknowledgement:
- *    "This product includes cryptographic software written by
- *     Eric Young (eay@cryptsoft.com)"
- *    The word 'cryptographic' can be left out if the rouines from the library
- *    being used are not cryptographic related :-).
- * 4. If you include any Windows specific code (or a derivative thereof) from 
- *    the apps directory (application code) you must include an acknowledgement:
- *    "This product includes software written by Tim Hudson (tjh@cryptsoft.com)"
- * 
- * THIS SOFTWARE IS PROVIDED BY ERIC YOUNG ``AS IS'' AND
- * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
- * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
- * ARE DISCLAIMED.  IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE
- * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
- * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
- * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
- * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
- * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
- * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
- * SUCH DAMAGE.
- * 
- * The licence and distribution terms for any publically available version or
- * derivative of this code cannot be changed.  i.e. this code cannot simply be
- * copied and put under another distribution licence
- * [including the GNU Public Licence.]
- */
-
-#include <stdio.h>
-#include "cryptlib.h"
-#include <openssl/asn1.h>
-
-
-/* UTF8 utilities */
-
-/* This parses a UTF8 string one character at a time. It is passed a pointer
- * to the string and the length of the string. It sets 'value' to the value of
- * the current character. It returns the number of characters read or a
- * negative error code:
- * -1 = string too short
- * -2 = illegal character
- * -3 = subsequent characters not of the form 10xxxxxx
- * -4 = character encoded incorrectly (not minimal length).
- */
-
-int UTF8_getc(const unsigned char *str, int len, unsigned long *val)
-{
-	const unsigned char *p;
-	unsigned long value;
-	int ret;
-	if(len <= 0) return 0;
-	p = str;
-
-	/* Check syntax and work out the encoded value (if correct) */
-	if((*p & 0x80) == 0) {
-		value = *p++ & 0x7f;
-		ret = 1;
-	} else if((*p & 0xe0) == 0xc0) {
-		if(len < 2) return -1;
-		if((p[1] & 0xc0) != 0x80) return -3;
-		value = (*p++ & 0x1f) << 6;
-		value |= *p++ & 0x3f;
-		if(value < 0x80) return -4;
-		ret = 2;
-	} else if((*p & 0xf0) == 0xe0) {
-		if(len < 3) return -1;
-		if( ((p[1] & 0xc0) != 0x80)
-		   || ((p[2] & 0xc0) != 0x80) ) return -3;
-		value = (*p++ & 0xf) << 12;
-		value |= (*p++ & 0x3f) << 6;
-		value |= *p++ & 0x3f;
-		if(value < 0x800) return -4;
-		ret = 3;
-	} else if((*p & 0xf8) == 0xf0) {
-		if(len < 4) return -1;
-		if( ((p[1] & 0xc0) != 0x80)
-		   || ((p[2] & 0xc0) != 0x80) 
-		   || ((p[3] & 0xc0) != 0x80) ) return -3;
-		value = ((unsigned long)(*p++ & 0x7)) << 18;
-		value |= (*p++ & 0x3f) << 12;
-		value |= (*p++ & 0x3f) << 6;
-		value |= *p++ & 0x3f;
-		if(value < 0x10000) return -4;
-		ret = 4;
-	} else if((*p & 0xfc) == 0xf8) {
-		if(len < 5) return -1;
-		if( ((p[1] & 0xc0) != 0x80)
-		   || ((p[2] & 0xc0) != 0x80) 
-		   || ((p[3] & 0xc0) != 0x80) 
-		   || ((p[4] & 0xc0) != 0x80) ) return -3;
-		value = ((unsigned long)(*p++ & 0x3)) << 24;
-		value |= ((unsigned long)(*p++ & 0x3f)) << 18;
-		value |= ((unsigned long)(*p++ & 0x3f)) << 12;
-		value |= (*p++ & 0x3f) << 6;
-		value |= *p++ & 0x3f;
-		if(value < 0x200000) return -4;
-		ret = 5;
-	} else if((*p & 0xfe) == 0xfc) {
-		if(len < 6) return -1;
-		if( ((p[1] & 0xc0) != 0x80)
-		   || ((p[2] & 0xc0) != 0x80) 
-		   || ((p[3] & 0xc0) != 0x80) 
-		   || ((p[4] & 0xc0) != 0x80) 
-		   || ((p[5] & 0xc0) != 0x80) ) return -3;
-		value = ((unsigned long)(*p++ & 0x1)) << 30;
-		value |= ((unsigned long)(*p++ & 0x3f)) << 24;
-		value |= ((unsigned long)(*p++ & 0x3f)) << 18;
-		value |= ((unsigned long)(*p++ & 0x3f)) << 12;
-		value |= (*p++ & 0x3f) << 6;
-		value |= *p++ & 0x3f;
-		if(value < 0x4000000) return -4;
-		ret = 6;
-	} else return -2;
-	*val = value;
-	return ret;
-}
-
-/* This takes a character 'value' and writes the UTF8 encoded value in
- * 'str' where 'str' is a buffer containing 'len' characters. Returns
- * the number of characters written or -1 if 'len' is too small. 'str' can
- * be set to NULL in which case it just returns the number of characters.
- * It will need at most 6 characters.
- */
-
-int UTF8_putc(unsigned char *str, int len, unsigned long value)
-{
-	if(!str) len = 6;	/* Maximum we will need */
-	else if(len <= 0) return -1;
-	if(value < 0x80) {
-		if(str) *str = (unsigned char)value;
-		return 1;
-	}
-	if(value < 0x800) {
-		if(len < 2) return -1;
-		if(str) {
-			*str++ = (unsigned char)(((value >> 6) & 0x1f) | 0xc0);
-			*str = (unsigned char)((value & 0x3f) | 0x80);
-		}
-		return 2;
-	}
-	if(value < 0x10000) {
-		if(len < 3) return -1;
-		if(str) {
-			*str++ = (unsigned char)(((value >> 12) & 0xf) | 0xe0);
-			*str++ = (unsigned char)(((value >> 6) & 0x3f) | 0x80);
-			*str = (unsigned char)((value & 0x3f) | 0x80);
-		}
-		return 3;
-	}
-	if(value < 0x200000) {
-		if(len < 4) return -1;
-		if(str) {
-			*str++ = (unsigned char)(((value >> 18) & 0x7) | 0xf0);
-			*str++ = (unsigned char)(((value >> 12) & 0x3f) | 0x80);
-			*str++ = (unsigned char)(((value >> 6) & 0x3f) | 0x80);
-			*str = (unsigned char)((value & 0x3f) | 0x80);
-		}
-		return 4;
-	}
-	if(value < 0x4000000) {
-		if(len < 5) return -1;
-		if(str) {
-			*str++ = (unsigned char)(((value >> 24) & 0x3) | 0xf8);
-			*str++ = (unsigned char)(((value >> 18) & 0x3f) | 0x80);
-			*str++ = (unsigned char)(((value >> 12) & 0x3f) | 0x80);
-			*str++ = (unsigned char)(((value >> 6) & 0x3f) | 0x80);
-			*str = (unsigned char)((value & 0x3f) | 0x80);
-		}
-		return 5;
-	}
-	if(len < 6) return -1;
-	if(str) {
-		*str++ = (unsigned char)(((value >> 30) & 0x1) | 0xfc);
-		*str++ = (unsigned char)(((value >> 24) & 0x3f) | 0x80);
-		*str++ = (unsigned char)(((value >> 18) & 0x3f) | 0x80);
-		*str++ = (unsigned char)(((value >> 12) & 0x3f) | 0x80);
-		*str++ = (unsigned char)(((value >> 6) & 0x3f) | 0x80);
-		*str = (unsigned char)((value & 0x3f) | 0x80);
-	}
-	return 6;
-}
diff --git a/crypto/openssl/crypto/asn1/a_verify.c b/crypto/openssl/crypto/asn1/a_verify.c
deleted file mode 100644
index fdce6e4380b6..000000000000
--- a/crypto/openssl/crypto/asn1/a_verify.c
+++ /dev/null
@@ -1,181 +0,0 @@
-/* crypto/asn1/a_verify.c */
-/* Copyright (C) 1995-1998 Eric Young (eay@cryptsoft.com)
- * All rights reserved.
- *
- * This package is an SSL implementation written
- * by Eric Young (eay@cryptsoft.com).
- * The implementation was written so as to conform with Netscapes SSL.
- * 
- * This library is free for commercial and non-commercial use as long as
- * the following conditions are aheared to.  The following conditions
- * apply to all code found in this distribution, be it the RC4, RSA,
- * lhash, DES, etc., code; not just the SSL code.  The SSL documentation
- * included with this distribution is covered by the same copyright terms
- * except that the holder is Tim Hudson (tjh@cryptsoft.com).
- * 
- * Copyright remains Eric Young's, and as such any Copyright notices in
- * the code are not to be removed.
- * If this package is used in a product, Eric Young should be given attribution
- * as the author of the parts of the library used.
- * This can be in the form of a textual message at program startup or
- * in documentation (online or textual) provided with the package.
- * 
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions
- * are met:
- * 1. Redistributions of source code must retain the copyright
- *    notice, this list of conditions and the following disclaimer.
- * 2. Redistributions in binary form must reproduce the above copyright
- *    notice, this list of conditions and the following disclaimer in the
- *    documentation and/or other materials provided with the distribution.
- * 3. All advertising materials mentioning features or use of this software
- *    must display the following acknowledgement:
- *    "This product includes cryptographic software written by
- *     Eric Young (eay@cryptsoft.com)"
- *    The word 'cryptographic' can be left out if the rouines from the library
- *    being used are not cryptographic related :-).
- * 4. If you include any Windows specific code (or a derivative thereof) from 
- *    the apps directory (application code) you must include an acknowledgement:
- *    "This product includes software written by Tim Hudson (tjh@cryptsoft.com)"
- * 
- * THIS SOFTWARE IS PROVIDED BY ERIC YOUNG ``AS IS'' AND
- * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
- * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
- * ARE DISCLAIMED.  IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE
- * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
- * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
- * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
- * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
- * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
- * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
- * SUCH DAMAGE.
- * 
- * The licence and distribution terms for any publically available version or
- * derivative of this code cannot be changed.  i.e. this code cannot simply be
- * copied and put under another distribution licence
- * [including the GNU Public Licence.]
- */
-
-#include <stdio.h>
-#include <time.h>
-
-#include "cryptlib.h"
-
-#ifndef NO_SYS_TYPES_H
-# include <sys/types.h>
-#endif
-
-#include <openssl/bn.h>
-#include <openssl/x509.h>
-#include <openssl/objects.h>
-#include <openssl/buffer.h>
-#include <openssl/evp.h>
-
-#ifndef NO_ASN1_OLD
-
-int ASN1_verify(i2d_of_void *i2d, X509_ALGOR *a, ASN1_BIT_STRING *signature,
-		char *data, EVP_PKEY *pkey)
-	{
-	EVP_MD_CTX ctx;
-	const EVP_MD *type;
-	unsigned char *p,*buf_in=NULL;
-	int ret= -1,i,inl;
-
-	EVP_MD_CTX_init(&ctx);
-	i=OBJ_obj2nid(a->algorithm);
-	type=EVP_get_digestbyname(OBJ_nid2sn(i));
-	if (type == NULL)
-		{
-		ASN1err(ASN1_F_ASN1_VERIFY,ASN1_R_UNKNOWN_MESSAGE_DIGEST_ALGORITHM);
-		goto err;
-		}
-	
-	inl=i2d(data,NULL);
-	buf_in=OPENSSL_malloc((unsigned int)inl);
-	if (buf_in == NULL)
-		{
-		ASN1err(ASN1_F_ASN1_VERIFY,ERR_R_MALLOC_FAILURE);
-		goto err;
-		}
-	p=buf_in;
-
-	i2d(data,&p);
-	EVP_VerifyInit_ex(&ctx,type, NULL);
-	EVP_VerifyUpdate(&ctx,(unsigned char *)buf_in,inl);
-
-	OPENSSL_cleanse(buf_in,(unsigned int)inl);
-	OPENSSL_free(buf_in);
-
-	if (EVP_VerifyFinal(&ctx,(unsigned char *)signature->data,
-			(unsigned int)signature->length,pkey) <= 0)
-		{
-		ASN1err(ASN1_F_ASN1_VERIFY,ERR_R_EVP_LIB);
-		ret=0;
-		goto err;
-		}
-	/* we don't need to zero the 'ctx' because we just checked
-	 * public information */
-	/* memset(&ctx,0,sizeof(ctx)); */
-	ret=1;
-err:
-	EVP_MD_CTX_cleanup(&ctx);
-	return(ret);
-	}
-
-#endif
-
-
-int ASN1_item_verify(const ASN1_ITEM *it, X509_ALGOR *a, ASN1_BIT_STRING *signature,
-	     void *asn, EVP_PKEY *pkey)
-	{
-	EVP_MD_CTX ctx;
-	const EVP_MD *type;
-	unsigned char *buf_in=NULL;
-	int ret= -1,i,inl;
-
-	EVP_MD_CTX_init(&ctx);
-	i=OBJ_obj2nid(a->algorithm);
-	type=EVP_get_digestbyname(OBJ_nid2sn(i));
-	if (type == NULL)
-		{
-		ASN1err(ASN1_F_ASN1_ITEM_VERIFY,ASN1_R_UNKNOWN_MESSAGE_DIGEST_ALGORITHM);
-		goto err;
-		}
-
-	if (!EVP_VerifyInit_ex(&ctx,type, NULL))
-		{
-		ASN1err(ASN1_F_ASN1_ITEM_VERIFY,ERR_R_EVP_LIB);
-		ret=0;
-		goto err;
-		}
-
-	inl = ASN1_item_i2d(asn, &buf_in, it);
-	
-	if (buf_in == NULL)
-		{
-		ASN1err(ASN1_F_ASN1_ITEM_VERIFY,ERR_R_MALLOC_FAILURE);
-		goto err;
-		}
-
-	EVP_VerifyUpdate(&ctx,(unsigned char *)buf_in,inl);
-
-	OPENSSL_cleanse(buf_in,(unsigned int)inl);
-	OPENSSL_free(buf_in);
-
-	if (EVP_VerifyFinal(&ctx,(unsigned char *)signature->data,
-			(unsigned int)signature->length,pkey) <= 0)
-		{
-		ASN1err(ASN1_F_ASN1_ITEM_VERIFY,ERR_R_EVP_LIB);
-		ret=0;
-		goto err;
-		}
-	/* we don't need to zero the 'ctx' because we just checked
-	 * public information */
-	/* memset(&ctx,0,sizeof(ctx)); */
-	ret=1;
-err:
-	EVP_MD_CTX_cleanup(&ctx);
-	return(ret);
-	}
-
-
diff --git a/crypto/openssl/crypto/asn1/asn1.h b/crypto/openssl/crypto/asn1/asn1.h
deleted file mode 100644
index 30f1eecd5b90..000000000000
--- a/crypto/openssl/crypto/asn1/asn1.h
+++ /dev/null
@@ -1,1233 +0,0 @@
-/* crypto/asn1/asn1.h */
-/* Copyright (C) 1995-1998 Eric Young (eay@cryptsoft.com)
- * All rights reserved.
- *
- * This package is an SSL implementation written
- * by Eric Young (eay@cryptsoft.com).
- * The implementation was written so as to conform with Netscapes SSL.
- * 
- * This library is free for commercial and non-commercial use as long as
- * the following conditions are aheared to.  The following conditions
- * apply to all code found in this distribution, be it the RC4, RSA,
- * lhash, DES, etc., code; not just the SSL code.  The SSL documentation
- * included with this distribution is covered by the same copyright terms
- * except that the holder is Tim Hudson (tjh@cryptsoft.com).
- * 
- * Copyright remains Eric Young's, and as such any Copyright notices in
- * the code are not to be removed.
- * If this package is used in a product, Eric Young should be given attribution
- * as the author of the parts of the library used.
- * This can be in the form of a textual message at program startup or
- * in documentation (online or textual) provided with the package.
- * 
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions
- * are met:
- * 1. Redistributions of source code must retain the copyright
- *    notice, this list of conditions and the following disclaimer.
- * 2. Redistributions in binary form must reproduce the above copyright
- *    notice, this list of conditions and the following disclaimer in the
- *    documentation and/or other materials provided with the distribution.
- * 3. All advertising materials mentioning features or use of this software
- *    must display the following acknowledgement:
- *    "This product includes cryptographic software written by
- *     Eric Young (eay@cryptsoft.com)"
- *    The word 'cryptographic' can be left out if the rouines from the library
- *    being used are not cryptographic related :-).
- * 4. If you include any Windows specific code (or a derivative thereof) from 
- *    the apps directory (application code) you must include an acknowledgement:
- *    "This product includes software written by Tim Hudson (tjh@cryptsoft.com)"
- * 
- * THIS SOFTWARE IS PROVIDED BY ERIC YOUNG ``AS IS'' AND
- * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
- * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
- * ARE DISCLAIMED.  IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE
- * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
- * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
- * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
- * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
- * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
- * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
- * SUCH DAMAGE.
- * 
- * The licence and distribution terms for any publically available version or
- * derivative of this code cannot be changed.  i.e. this code cannot simply be
- * copied and put under another distribution licence
- * [including the GNU Public Licence.]
- */
-
-#ifndef HEADER_ASN1_H
-#define HEADER_ASN1_H
-
-#include <time.h>
-#include <openssl/e_os2.h>
-#ifndef OPENSSL_NO_BIO
-#include <openssl/bio.h>
-#endif
-#include <openssl/stack.h>
-#include <openssl/safestack.h>
-
-#include <openssl/symhacks.h>
-
-#include <openssl/ossl_typ.h>
-#ifndef OPENSSL_NO_DEPRECATED
-#include <openssl/bn.h>
-#endif
-
-#ifdef OPENSSL_BUILD_SHLIBCRYPTO
-# undef OPENSSL_EXTERN
-# define OPENSSL_EXTERN OPENSSL_EXPORT
-#endif
-
-#ifdef  __cplusplus
-extern "C" {
-#endif
-
-#define V_ASN1_UNIVERSAL		0x00
-#define	V_ASN1_APPLICATION		0x40
-#define V_ASN1_CONTEXT_SPECIFIC		0x80
-#define V_ASN1_PRIVATE			0xc0
-
-#define V_ASN1_CONSTRUCTED		0x20
-#define V_ASN1_PRIMITIVE_TAG		0x1f
-#define V_ASN1_PRIMATIVE_TAG		0x1f
-
-#define V_ASN1_APP_CHOOSE		-2	/* let the recipient choose */
-#define V_ASN1_OTHER			-3	/* used in ASN1_TYPE */
-#define V_ASN1_ANY			-4	/* used in ASN1 template code */
-
-#define V_ASN1_NEG			0x100	/* negative flag */
-
-#define V_ASN1_UNDEF			-1
-#define V_ASN1_EOC			0
-#define V_ASN1_BOOLEAN			1	/**/
-#define V_ASN1_INTEGER			2
-#define V_ASN1_NEG_INTEGER		(2 | V_ASN1_NEG)
-#define V_ASN1_BIT_STRING		3
-#define V_ASN1_OCTET_STRING		4
-#define V_ASN1_NULL			5
-#define V_ASN1_OBJECT			6
-#define V_ASN1_OBJECT_DESCRIPTOR	7
-#define V_ASN1_EXTERNAL			8
-#define V_ASN1_REAL			9
-#define V_ASN1_ENUMERATED		10
-#define V_ASN1_NEG_ENUMERATED		(10 | V_ASN1_NEG)
-#define V_ASN1_UTF8STRING		12
-#define V_ASN1_SEQUENCE			16
-#define V_ASN1_SET			17
-#define V_ASN1_NUMERICSTRING		18	/**/
-#define V_ASN1_PRINTABLESTRING		19
-#define V_ASN1_T61STRING		20
-#define V_ASN1_TELETEXSTRING		20	/* alias */
-#define V_ASN1_VIDEOTEXSTRING		21	/**/
-#define V_ASN1_IA5STRING		22
-#define V_ASN1_UTCTIME			23
-#define V_ASN1_GENERALIZEDTIME		24	/**/
-#define V_ASN1_GRAPHICSTRING		25	/**/
-#define V_ASN1_ISO64STRING		26	/**/
-#define V_ASN1_VISIBLESTRING		26	/* alias */
-#define V_ASN1_GENERALSTRING		27	/**/
-#define V_ASN1_UNIVERSALSTRING		28	/**/
-#define V_ASN1_BMPSTRING		30
-
-/* For use with d2i_ASN1_type_bytes() */
-#define B_ASN1_NUMERICSTRING	0x0001
-#define B_ASN1_PRINTABLESTRING	0x0002
-#define B_ASN1_T61STRING	0x0004
-#define B_ASN1_TELETEXSTRING	0x0004
-#define B_ASN1_VIDEOTEXSTRING	0x0008
-#define B_ASN1_IA5STRING	0x0010
-#define B_ASN1_GRAPHICSTRING	0x0020
-#define B_ASN1_ISO64STRING	0x0040
-#define B_ASN1_VISIBLESTRING	0x0040
-#define B_ASN1_GENERALSTRING	0x0080
-#define B_ASN1_UNIVERSALSTRING	0x0100
-#define B_ASN1_OCTET_STRING	0x0200
-#define B_ASN1_BIT_STRING	0x0400
-#define B_ASN1_BMPSTRING	0x0800
-#define B_ASN1_UNKNOWN		0x1000
-#define B_ASN1_UTF8STRING	0x2000
-#define B_ASN1_UTCTIME		0x4000
-#define B_ASN1_GENERALIZEDTIME	0x8000
-#define B_ASN1_SEQUENCE		0x10000
-
-/* For use with ASN1_mbstring_copy() */
-#define MBSTRING_FLAG		0x1000
-#define MBSTRING_UTF8		(MBSTRING_FLAG)
-#define MBSTRING_ASC		(MBSTRING_FLAG|1)
-#define MBSTRING_BMP		(MBSTRING_FLAG|2)
-#define MBSTRING_UNIV		(MBSTRING_FLAG|4)
-
-struct X509_algor_st;
-
-#define DECLARE_ASN1_SET_OF(type) /* filled in by mkstack.pl */
-#define IMPLEMENT_ASN1_SET_OF(type) /* nothing, no longer needed */
-
-/* We MUST make sure that, except for constness, asn1_ctx_st and
-   asn1_const_ctx are exactly the same.  Fortunately, as soon as
-   the old ASN1 parsing macros are gone, we can throw this away
-   as well... */
-typedef struct asn1_ctx_st
-	{
-	unsigned char *p;/* work char pointer */
-	int eos;	/* end of sequence read for indefinite encoding */
-	int error;	/* error code to use when returning an error */
-	int inf;	/* constructed if 0x20, indefinite is 0x21 */
-	int tag;	/* tag from last 'get object' */
-	int xclass;	/* class from last 'get object' */
-	long slen;	/* length of last 'get object' */
-	unsigned char *max; /* largest value of p allowed */
-	unsigned char *q;/* temporary variable */
-	unsigned char **pp;/* variable */
-	int line;	/* used in error processing */
-	} ASN1_CTX;
-
-typedef struct asn1_const_ctx_st
-	{
-	const unsigned char *p;/* work char pointer */
-	int eos;	/* end of sequence read for indefinite encoding */
-	int error;	/* error code to use when returning an error */
-	int inf;	/* constructed if 0x20, indefinite is 0x21 */
-	int tag;	/* tag from last 'get object' */
-	int xclass;	/* class from last 'get object' */
-	long slen;	/* length of last 'get object' */
-	const unsigned char *max; /* largest value of p allowed */
-	const unsigned char *q;/* temporary variable */
-	const unsigned char **pp;/* variable */
-	int line;	/* used in error processing */
-	} ASN1_const_CTX;
-
-/* These are used internally in the ASN1_OBJECT to keep track of
- * whether the names and data need to be free()ed */
-#define ASN1_OBJECT_FLAG_DYNAMIC	 0x01	/* internal use */
-#define ASN1_OBJECT_FLAG_CRITICAL	 0x02	/* critical x509v3 object id */
-#define ASN1_OBJECT_FLAG_DYNAMIC_STRINGS 0x04	/* internal use */
-#define ASN1_OBJECT_FLAG_DYNAMIC_DATA 	 0x08	/* internal use */
-typedef struct asn1_object_st
-	{
-	const char *sn,*ln;
-	int nid;
-	int length;
-	unsigned char *data;
-	int flags;	/* Should we free this one */
-	} ASN1_OBJECT;
-
-#define ASN1_STRING_FLAG_BITS_LEFT 0x08 /* Set if 0x07 has bits left value */
-/* This indicates that the ASN1_STRING is not a real value but just a place
- * holder for the location where indefinite length constructed data should
- * be inserted in the memory buffer 
- */
-#define ASN1_STRING_FLAG_NDEF 0x010 
-/* This is the base type that holds just about everything :-) */
-typedef struct asn1_string_st
-	{
-	int length;
-	int type;
-	unsigned char *data;
-	/* The value of the following field depends on the type being
-	 * held.  It is mostly being used for BIT_STRING so if the
-	 * input data has a non-zero 'unused bits' value, it will be
-	 * handled correctly */
-	long flags;
-	} ASN1_STRING;
-
-/* ASN1_ENCODING structure: this is used to save the received
- * encoding of an ASN1 type. This is useful to get round
- * problems with invalid encodings which can break signatures.
- */
-
-typedef struct ASN1_ENCODING_st
-	{
-	unsigned char *enc;	/* DER encoding */
-	long len;		/* Length of encoding */
-	int modified;		 /* set to 1 if 'enc' is invalid */
-	} ASN1_ENCODING;
-
-/* Used with ASN1 LONG type: if a long is set to this it is omitted */
-#define ASN1_LONG_UNDEF	0x7fffffffL
-
-#define STABLE_FLAGS_MALLOC	0x01
-#define STABLE_NO_MASK		0x02
-#define DIRSTRING_TYPE	\
- (B_ASN1_PRINTABLESTRING|B_ASN1_T61STRING|B_ASN1_BMPSTRING|B_ASN1_UTF8STRING)
-#define PKCS9STRING_TYPE (DIRSTRING_TYPE|B_ASN1_IA5STRING)
-
-typedef struct asn1_string_table_st {
-	int nid;
-	long minsize;
-	long maxsize;
-	unsigned long mask;
-	unsigned long flags;
-} ASN1_STRING_TABLE;
-
-DECLARE_STACK_OF(ASN1_STRING_TABLE)
-
-/* size limits: this stuff is taken straight from RFC2459 */
-
-#define ub_name				32768
-#define ub_common_name			64
-#define ub_locality_name		128
-#define ub_state_name			128
-#define ub_organization_name		64
-#define ub_organization_unit_name	64
-#define ub_title			64
-#define ub_email_address		128
-
-/* Declarations for template structures: for full definitions
- * see asn1t.h
- */
-typedef struct ASN1_TEMPLATE_st ASN1_TEMPLATE;
-typedef struct ASN1_ITEM_st ASN1_ITEM;
-typedef struct ASN1_TLC_st ASN1_TLC;
-/* This is just an opaque pointer */
-typedef struct ASN1_VALUE_st ASN1_VALUE;
-
-/* Declare ASN1 functions: the implement macro in in asn1t.h */
-
-#define DECLARE_ASN1_FUNCTIONS(type) DECLARE_ASN1_FUNCTIONS_name(type, type)
-
-#define DECLARE_ASN1_ALLOC_FUNCTIONS(type) \
-	DECLARE_ASN1_ALLOC_FUNCTIONS_name(type, type)
-
-#define DECLARE_ASN1_FUNCTIONS_name(type, name) \
-	DECLARE_ASN1_ALLOC_FUNCTIONS_name(type, name) \
-	DECLARE_ASN1_ENCODE_FUNCTIONS(type, name, name)
-
-#define DECLARE_ASN1_FUNCTIONS_fname(type, itname, name) \
-	DECLARE_ASN1_ALLOC_FUNCTIONS_name(type, name) \
-	DECLARE_ASN1_ENCODE_FUNCTIONS(type, itname, name)
-
-#define	DECLARE_ASN1_ENCODE_FUNCTIONS(type, itname, name) \
-	type *d2i_##name(type **a, const unsigned char **in, long len); \
-	int i2d_##name(type *a, unsigned char **out); \
-	DECLARE_ASN1_ITEM(itname)
-
-#define	DECLARE_ASN1_ENCODE_FUNCTIONS_const(type, name) \
-	type *d2i_##name(type **a, const unsigned char **in, long len); \
-	int i2d_##name(const type *a, unsigned char **out); \
-	DECLARE_ASN1_ITEM(name)
-
-#define	DECLARE_ASN1_NDEF_FUNCTION(name) \
-	int i2d_##name##_NDEF(name *a, unsigned char **out);
-
-#define DECLARE_ASN1_FUNCTIONS_const(name) \
-	name *name##_new(void); \
-	void name##_free(name *a);
-
-#define DECLARE_ASN1_ALLOC_FUNCTIONS_name(type, name) \
-	type *name##_new(void); \
-	void name##_free(type *a);
-
-#define D2I_OF(type) type *(*)(type **,const unsigned char **,long)
-#define I2D_OF(type) int (*)(type *,unsigned char **)
-#define I2D_OF_const(type) int (*)(const type *,unsigned char **)
-
-#define TYPEDEF_D2I_OF(type) typedef type *d2i_of_##type(type **,const unsigned char **,long)
-#define TYPEDEF_I2D_OF(type) typedef int i2d_of_##type(type *,unsigned char **)
-#define TYPEDEF_D2I2D_OF(type) TYPEDEF_D2I_OF(type); TYPEDEF_I2D_OF(type)
-
-TYPEDEF_D2I2D_OF(void);
-
-/* The following macros and typedefs allow an ASN1_ITEM
- * to be embedded in a structure and referenced. Since
- * the ASN1_ITEM pointers need to be globally accessible
- * (possibly from shared libraries) they may exist in
- * different forms. On platforms that support it the
- * ASN1_ITEM structure itself will be globally exported.
- * Other platforms will export a function that returns
- * an ASN1_ITEM pointer.
- *
- * To handle both cases transparently the macros below
- * should be used instead of hard coding an ASN1_ITEM
- * pointer in a structure.
- *
- * The structure will look like this:
- *
- * typedef struct SOMETHING_st {
- *      ...
- *      ASN1_ITEM_EXP *iptr;
- *      ...
- * } SOMETHING; 
- *
- * It would be initialised as e.g.:
- *
- * SOMETHING somevar = {...,ASN1_ITEM_ref(X509),...};
- *
- * and the actual pointer extracted with:
- *
- * const ASN1_ITEM *it = ASN1_ITEM_ptr(somevar.iptr);
- *
- * Finally an ASN1_ITEM pointer can be extracted from an
- * appropriate reference with: ASN1_ITEM_rptr(X509). This
- * would be used when a function takes an ASN1_ITEM * argument.
- *
- */
-
-#ifndef OPENSSL_EXPORT_VAR_AS_FUNCTION
-
-/* ASN1_ITEM pointer exported type */
-typedef const ASN1_ITEM ASN1_ITEM_EXP;
-
-/* Macro to obtain ASN1_ITEM pointer from exported type */
-#define ASN1_ITEM_ptr(iptr) (iptr)
-
-/* Macro to include ASN1_ITEM pointer from base type */
-#define ASN1_ITEM_ref(iptr) (&(iptr##_it))
-
-#define ASN1_ITEM_rptr(ref) (&(ref##_it))
-
-#define DECLARE_ASN1_ITEM(name) \
-	OPENSSL_EXTERN const ASN1_ITEM name##_it;
-
-#else
-
-/* Platforms that can't easily handle shared global variables are declared
- * as functions returning ASN1_ITEM pointers.
- */
-
-/* ASN1_ITEM pointer exported type */
-typedef const ASN1_ITEM * ASN1_ITEM_EXP(void);
-
-/* Macro to obtain ASN1_ITEM pointer from exported type */
-#define ASN1_ITEM_ptr(iptr) (iptr())
-
-/* Macro to include ASN1_ITEM pointer from base type */
-#define ASN1_ITEM_ref(iptr) (iptr##_it)
-
-#define ASN1_ITEM_rptr(ref) (ref##_it())
-
-#define DECLARE_ASN1_ITEM(name) \
-	const ASN1_ITEM * name##_it(void);
-
-#endif
-
-/* Parameters used by ASN1_STRING_print_ex() */
-
-/* These determine which characters to escape:
- * RFC2253 special characters, control characters and
- * MSB set characters
- */
-
-#define ASN1_STRFLGS_ESC_2253		1
-#define ASN1_STRFLGS_ESC_CTRL		2
-#define ASN1_STRFLGS_ESC_MSB		4
-
-
-/* This flag determines how we do escaping: normally
- * RC2253 backslash only, set this to use backslash and
- * quote.
- */
-
-#define ASN1_STRFLGS_ESC_QUOTE		8
-
-
-/* These three flags are internal use only. */
-
-/* Character is a valid PrintableString character */
-#define CHARTYPE_PRINTABLESTRING	0x10
-/* Character needs escaping if it is the first character */
-#define CHARTYPE_FIRST_ESC_2253		0x20
-/* Character needs escaping if it is the last character */
-#define CHARTYPE_LAST_ESC_2253		0x40
-
-/* NB the internal flags are safely reused below by flags
- * handled at the top level.
- */
-
-/* If this is set we convert all character strings
- * to UTF8 first 
- */
-
-#define ASN1_STRFLGS_UTF8_CONVERT	0x10
-
-/* If this is set we don't attempt to interpret content:
- * just assume all strings are 1 byte per character. This
- * will produce some pretty odd looking output!
- */
-
-#define ASN1_STRFLGS_IGNORE_TYPE	0x20
-
-/* If this is set we include the string type in the output */
-#define ASN1_STRFLGS_SHOW_TYPE		0x40
-
-/* This determines which strings to display and which to
- * 'dump' (hex dump of content octets or DER encoding). We can
- * only dump non character strings or everything. If we
- * don't dump 'unknown' they are interpreted as character
- * strings with 1 octet per character and are subject to
- * the usual escaping options.
- */
-
-#define ASN1_STRFLGS_DUMP_ALL		0x80
-#define ASN1_STRFLGS_DUMP_UNKNOWN	0x100
-
-/* These determine what 'dumping' does, we can dump the
- * content octets or the DER encoding: both use the
- * RFC2253 #XXXXX notation.
- */
-
-#define ASN1_STRFLGS_DUMP_DER		0x200
-
-/* All the string flags consistent with RFC2253,
- * escaping control characters isn't essential in
- * RFC2253 but it is advisable anyway.
- */
-
-#define ASN1_STRFLGS_RFC2253	(ASN1_STRFLGS_ESC_2253 | \
-				ASN1_STRFLGS_ESC_CTRL | \
-				ASN1_STRFLGS_ESC_MSB | \
-				ASN1_STRFLGS_UTF8_CONVERT | \
-				ASN1_STRFLGS_DUMP_UNKNOWN | \
-				ASN1_STRFLGS_DUMP_DER)
-
-DECLARE_STACK_OF(ASN1_INTEGER)
-DECLARE_ASN1_SET_OF(ASN1_INTEGER)
-
-DECLARE_STACK_OF(ASN1_GENERALSTRING)
-
-typedef struct asn1_type_st
-	{
-	int type;
-	union	{
-		char *ptr;
-		ASN1_BOOLEAN		boolean;
-		ASN1_STRING *		asn1_string;
-		ASN1_OBJECT *		object;
-		ASN1_INTEGER *		integer;
-		ASN1_ENUMERATED *	enumerated;
-		ASN1_BIT_STRING *	bit_string;
-		ASN1_OCTET_STRING *	octet_string;
-		ASN1_PRINTABLESTRING *	printablestring;
-		ASN1_T61STRING *	t61string;
-		ASN1_IA5STRING *	ia5string;
-		ASN1_GENERALSTRING *	generalstring;
-		ASN1_BMPSTRING *	bmpstring;
-		ASN1_UNIVERSALSTRING *	universalstring;
-		ASN1_UTCTIME *		utctime;
-		ASN1_GENERALIZEDTIME *	generalizedtime;
-		ASN1_VISIBLESTRING *	visiblestring;
-		ASN1_UTF8STRING *	utf8string;
-		/* set and sequence are left complete and still
-		 * contain the set or sequence bytes */
-		ASN1_STRING *		set;
-		ASN1_STRING *		sequence;
-		} value;
-	} ASN1_TYPE;
-
-DECLARE_STACK_OF(ASN1_TYPE)
-DECLARE_ASN1_SET_OF(ASN1_TYPE)
-
-typedef struct asn1_method_st
-	{
-	i2d_of_void *i2d;
-	d2i_of_void *d2i;
-	void *(*create)(void);
-	void (*destroy)(void *);
-	} ASN1_METHOD;
-
-/* This is used when parsing some Netscape objects */
-typedef struct asn1_header_st
-	{
-	ASN1_OCTET_STRING *header;
-	void *data;
-	ASN1_METHOD *meth;
-	} ASN1_HEADER;
-
-/* This is used to contain a list of bit names */
-typedef struct BIT_STRING_BITNAME_st {
-	int bitnum;
-	const char *lname;
-	const char *sname;
-} BIT_STRING_BITNAME;
-
-
-#define M_ASN1_STRING_length(x)	((x)->length)
-#define M_ASN1_STRING_length_set(x, n)	((x)->length = (n))
-#define M_ASN1_STRING_type(x)	((x)->type)
-#define M_ASN1_STRING_data(x)	((x)->data)
-
-/* Macros for string operations */
-#define M_ASN1_BIT_STRING_new()	(ASN1_BIT_STRING *)\
-		ASN1_STRING_type_new(V_ASN1_BIT_STRING)
-#define M_ASN1_BIT_STRING_free(a)	ASN1_STRING_free((ASN1_STRING *)a)
-#define M_ASN1_BIT_STRING_dup(a) (ASN1_BIT_STRING *)\
-		ASN1_STRING_dup((ASN1_STRING *)a)
-#define M_ASN1_BIT_STRING_cmp(a,b) ASN1_STRING_cmp(\
-		(ASN1_STRING *)a,(ASN1_STRING *)b)
-#define M_ASN1_BIT_STRING_set(a,b,c) ASN1_STRING_set((ASN1_STRING *)a,b,c)
-
-#define M_ASN1_INTEGER_new()	(ASN1_INTEGER *)\
-		ASN1_STRING_type_new(V_ASN1_INTEGER)
-#define M_ASN1_INTEGER_free(a)		ASN1_STRING_free((ASN1_STRING *)a)
-#define M_ASN1_INTEGER_dup(a) (ASN1_INTEGER *)ASN1_STRING_dup((ASN1_STRING *)a)
-#define M_ASN1_INTEGER_cmp(a,b)	ASN1_STRING_cmp(\
-		(ASN1_STRING *)a,(ASN1_STRING *)b)
-
-#define M_ASN1_ENUMERATED_new()	(ASN1_ENUMERATED *)\
-		ASN1_STRING_type_new(V_ASN1_ENUMERATED)
-#define M_ASN1_ENUMERATED_free(a)	ASN1_STRING_free((ASN1_STRING *)a)
-#define M_ASN1_ENUMERATED_dup(a) (ASN1_ENUMERATED *)ASN1_STRING_dup((ASN1_STRING *)a)
-#define M_ASN1_ENUMERATED_cmp(a,b)	ASN1_STRING_cmp(\
-		(ASN1_STRING *)a,(ASN1_STRING *)b)
-
-#define M_ASN1_OCTET_STRING_new()	(ASN1_OCTET_STRING *)\
-		ASN1_STRING_type_new(V_ASN1_OCTET_STRING)
-#define M_ASN1_OCTET_STRING_free(a)	ASN1_STRING_free((ASN1_STRING *)a)
-#define M_ASN1_OCTET_STRING_dup(a) (ASN1_OCTET_STRING *)\
-		ASN1_STRING_dup((ASN1_STRING *)a)
-#define M_ASN1_OCTET_STRING_cmp(a,b) ASN1_STRING_cmp(\
-		(ASN1_STRING *)a,(ASN1_STRING *)b)
-#define M_ASN1_OCTET_STRING_set(a,b,c)	ASN1_STRING_set((ASN1_STRING *)a,b,c)
-#define M_ASN1_OCTET_STRING_print(a,b)	ASN1_STRING_print(a,(ASN1_STRING *)b)
-#define M_i2d_ASN1_OCTET_STRING(a,pp) \
-		i2d_ASN1_bytes((ASN1_STRING *)a,pp,V_ASN1_OCTET_STRING,\
-		V_ASN1_UNIVERSAL)
-
-#define B_ASN1_TIME \
-			B_ASN1_UTCTIME | \
-			B_ASN1_GENERALIZEDTIME
-
-#define B_ASN1_PRINTABLE \
-			B_ASN1_PRINTABLESTRING| \
-			B_ASN1_T61STRING| \
-			B_ASN1_IA5STRING| \
-			B_ASN1_BIT_STRING| \
-			B_ASN1_UNIVERSALSTRING|\
-			B_ASN1_BMPSTRING|\
-			B_ASN1_UTF8STRING|\
-			B_ASN1_SEQUENCE|\
-			B_ASN1_UNKNOWN
-
-#define B_ASN1_DIRECTORYSTRING \
-			B_ASN1_PRINTABLESTRING| \
-			B_ASN1_TELETEXSTRING|\
-			B_ASN1_BMPSTRING|\
-			B_ASN1_UNIVERSALSTRING|\
-			B_ASN1_UTF8STRING
-
-#define B_ASN1_DISPLAYTEXT \
-			B_ASN1_IA5STRING| \
-			B_ASN1_VISIBLESTRING| \
-			B_ASN1_BMPSTRING|\
-			B_ASN1_UTF8STRING
-
-#define M_ASN1_PRINTABLE_new()	ASN1_STRING_type_new(V_ASN1_T61STRING)
-#define M_ASN1_PRINTABLE_free(a)	ASN1_STRING_free((ASN1_STRING *)a)
-#define M_i2d_ASN1_PRINTABLE(a,pp) i2d_ASN1_bytes((ASN1_STRING *)a,\
-		pp,a->type,V_ASN1_UNIVERSAL)
-#define M_d2i_ASN1_PRINTABLE(a,pp,l) \
-		d2i_ASN1_type_bytes((ASN1_STRING **)a,pp,l, \
-			B_ASN1_PRINTABLE)
-
-#define M_DIRECTORYSTRING_new() ASN1_STRING_type_new(V_ASN1_PRINTABLESTRING)
-#define M_DIRECTORYSTRING_free(a)	ASN1_STRING_free((ASN1_STRING *)a)
-#define M_i2d_DIRECTORYSTRING(a,pp) i2d_ASN1_bytes((ASN1_STRING *)a,\
-						pp,a->type,V_ASN1_UNIVERSAL)
-#define M_d2i_DIRECTORYSTRING(a,pp,l) \
-		d2i_ASN1_type_bytes((ASN1_STRING **)a,pp,l, \
-			B_ASN1_DIRECTORYSTRING)
-
-#define M_DISPLAYTEXT_new() ASN1_STRING_type_new(V_ASN1_VISIBLESTRING)
-#define M_DISPLAYTEXT_free(a) ASN1_STRING_free((ASN1_STRING *)a)
-#define M_i2d_DISPLAYTEXT(a,pp) i2d_ASN1_bytes((ASN1_STRING *)a,\
-						pp,a->type,V_ASN1_UNIVERSAL)
-#define M_d2i_DISPLAYTEXT(a,pp,l) \
-		d2i_ASN1_type_bytes((ASN1_STRING **)a,pp,l, \
-			B_ASN1_DISPLAYTEXT)
-
-#define M_ASN1_PRINTABLESTRING_new() (ASN1_PRINTABLESTRING *)\
-		ASN1_STRING_type_new(V_ASN1_PRINTABLESTRING)
-#define M_ASN1_PRINTABLESTRING_free(a)	ASN1_STRING_free((ASN1_STRING *)a)
-#define M_i2d_ASN1_PRINTABLESTRING(a,pp) \
-		i2d_ASN1_bytes((ASN1_STRING *)a,pp,V_ASN1_PRINTABLESTRING,\
-		V_ASN1_UNIVERSAL)
-#define M_d2i_ASN1_PRINTABLESTRING(a,pp,l) \
-		(ASN1_PRINTABLESTRING *)d2i_ASN1_type_bytes\
-		((ASN1_STRING **)a,pp,l,B_ASN1_PRINTABLESTRING)
-
-#define M_ASN1_T61STRING_new()	(ASN1_T61STRING *)\
-		ASN1_STRING_type_new(V_ASN1_T61STRING)
-#define M_ASN1_T61STRING_free(a)	ASN1_STRING_free((ASN1_STRING *)a)
-#define M_i2d_ASN1_T61STRING(a,pp) \
-		i2d_ASN1_bytes((ASN1_STRING *)a,pp,V_ASN1_T61STRING,\
-		V_ASN1_UNIVERSAL)
-#define M_d2i_ASN1_T61STRING(a,pp,l) \
-		(ASN1_T61STRING *)d2i_ASN1_type_bytes\
-		((ASN1_STRING **)a,pp,l,B_ASN1_T61STRING)
-
-#define M_ASN1_IA5STRING_new()	(ASN1_IA5STRING *)\
-		ASN1_STRING_type_new(V_ASN1_IA5STRING)
-#define M_ASN1_IA5STRING_free(a)	ASN1_STRING_free((ASN1_STRING *)a)
-#define M_ASN1_IA5STRING_dup(a)	\
-			(ASN1_IA5STRING *)ASN1_STRING_dup((ASN1_STRING *)a)
-#define M_i2d_ASN1_IA5STRING(a,pp) \
-		i2d_ASN1_bytes((ASN1_STRING *)a,pp,V_ASN1_IA5STRING,\
-			V_ASN1_UNIVERSAL)
-#define M_d2i_ASN1_IA5STRING(a,pp,l) \
-		(ASN1_IA5STRING *)d2i_ASN1_type_bytes((ASN1_STRING **)a,pp,l,\
-			B_ASN1_IA5STRING)
-
-#define M_ASN1_UTCTIME_new()	(ASN1_UTCTIME *)\
-		ASN1_STRING_type_new(V_ASN1_UTCTIME)
-#define M_ASN1_UTCTIME_free(a)	ASN1_STRING_free((ASN1_STRING *)a)
-#define M_ASN1_UTCTIME_dup(a) (ASN1_UTCTIME *)ASN1_STRING_dup((ASN1_STRING *)a)
-
-#define M_ASN1_GENERALIZEDTIME_new()	(ASN1_GENERALIZEDTIME *)\
-		ASN1_STRING_type_new(V_ASN1_GENERALIZEDTIME)
-#define M_ASN1_GENERALIZEDTIME_free(a)	ASN1_STRING_free((ASN1_STRING *)a)
-#define M_ASN1_GENERALIZEDTIME_dup(a) (ASN1_GENERALIZEDTIME *)ASN1_STRING_dup(\
-	(ASN1_STRING *)a)
-
-#define M_ASN1_TIME_new()	(ASN1_TIME *)\
-		ASN1_STRING_type_new(V_ASN1_UTCTIME)
-#define M_ASN1_TIME_free(a)	ASN1_STRING_free((ASN1_STRING *)a)
-#define M_ASN1_TIME_dup(a) (ASN1_TIME *)ASN1_STRING_dup((ASN1_STRING *)a)
-
-#define M_ASN1_GENERALSTRING_new()	(ASN1_GENERALSTRING *)\
-		ASN1_STRING_type_new(V_ASN1_GENERALSTRING)
-#define M_ASN1_GENERALSTRING_free(a)	ASN1_STRING_free((ASN1_STRING *)a)
-#define M_i2d_ASN1_GENERALSTRING(a,pp) \
-		i2d_ASN1_bytes((ASN1_STRING *)a,pp,V_ASN1_GENERALSTRING,\
-			V_ASN1_UNIVERSAL)
-#define M_d2i_ASN1_GENERALSTRING(a,pp,l) \
-		(ASN1_GENERALSTRING *)d2i_ASN1_type_bytes\
-		((ASN1_STRING **)a,pp,l,B_ASN1_GENERALSTRING)
-
-#define M_ASN1_UNIVERSALSTRING_new()	(ASN1_UNIVERSALSTRING *)\
-		ASN1_STRING_type_new(V_ASN1_UNIVERSALSTRING)
-#define M_ASN1_UNIVERSALSTRING_free(a)	ASN1_STRING_free((ASN1_STRING *)a)
-#define M_i2d_ASN1_UNIVERSALSTRING(a,pp) \
-		i2d_ASN1_bytes((ASN1_STRING *)a,pp,V_ASN1_UNIVERSALSTRING,\
-			V_ASN1_UNIVERSAL)
-#define M_d2i_ASN1_UNIVERSALSTRING(a,pp,l) \
-		(ASN1_UNIVERSALSTRING *)d2i_ASN1_type_bytes\
-		((ASN1_STRING **)a,pp,l,B_ASN1_UNIVERSALSTRING)
-
-#define M_ASN1_BMPSTRING_new()	(ASN1_BMPSTRING *)\
-		ASN1_STRING_type_new(V_ASN1_BMPSTRING)
-#define M_ASN1_BMPSTRING_free(a)	ASN1_STRING_free((ASN1_STRING *)a)
-#define M_i2d_ASN1_BMPSTRING(a,pp) \
-		i2d_ASN1_bytes((ASN1_STRING *)a,pp,V_ASN1_BMPSTRING,\
-			V_ASN1_UNIVERSAL)
-#define M_d2i_ASN1_BMPSTRING(a,pp,l) \
-		(ASN1_BMPSTRING *)d2i_ASN1_type_bytes\
-		((ASN1_STRING **)a,pp,l,B_ASN1_BMPSTRING)
-
-#define M_ASN1_VISIBLESTRING_new()	(ASN1_VISIBLESTRING *)\
-		ASN1_STRING_type_new(V_ASN1_VISIBLESTRING)
-#define M_ASN1_VISIBLESTRING_free(a)	ASN1_STRING_free((ASN1_STRING *)a)
-#define M_i2d_ASN1_VISIBLESTRING(a,pp) \
-		i2d_ASN1_bytes((ASN1_STRING *)a,pp,V_ASN1_VISIBLESTRING,\
-			V_ASN1_UNIVERSAL)
-#define M_d2i_ASN1_VISIBLESTRING(a,pp,l) \
-		(ASN1_VISIBLESTRING *)d2i_ASN1_type_bytes\
-		((ASN1_STRING **)a,pp,l,B_ASN1_VISIBLESTRING)
-
-#define M_ASN1_UTF8STRING_new()	(ASN1_UTF8STRING *)\
-		ASN1_STRING_type_new(V_ASN1_UTF8STRING)
-#define M_ASN1_UTF8STRING_free(a)	ASN1_STRING_free((ASN1_STRING *)a)
-#define M_i2d_ASN1_UTF8STRING(a,pp) \
-		i2d_ASN1_bytes((ASN1_STRING *)a,pp,V_ASN1_UTF8STRING,\
-			V_ASN1_UNIVERSAL)
-#define M_d2i_ASN1_UTF8STRING(a,pp,l) \
-		(ASN1_UTF8STRING *)d2i_ASN1_type_bytes\
-		((ASN1_STRING **)a,pp,l,B_ASN1_UTF8STRING)
-
-  /* for the is_set parameter to i2d_ASN1_SET */
-#define IS_SEQUENCE	0
-#define IS_SET		1
-
-DECLARE_ASN1_FUNCTIONS_fname(ASN1_TYPE, ASN1_ANY, ASN1_TYPE)
-
-int ASN1_TYPE_get(ASN1_TYPE *a);
-void ASN1_TYPE_set(ASN1_TYPE *a, int type, void *value);
-
-ASN1_OBJECT *	ASN1_OBJECT_new(void );
-void		ASN1_OBJECT_free(ASN1_OBJECT *a);
-int		i2d_ASN1_OBJECT(ASN1_OBJECT *a,unsigned char **pp);
-ASN1_OBJECT *	c2i_ASN1_OBJECT(ASN1_OBJECT **a,const unsigned char **pp,
-			long length);
-ASN1_OBJECT *	d2i_ASN1_OBJECT(ASN1_OBJECT **a,const unsigned char **pp,
-			long length);
-
-DECLARE_ASN1_ITEM(ASN1_OBJECT)
-
-DECLARE_STACK_OF(ASN1_OBJECT)
-DECLARE_ASN1_SET_OF(ASN1_OBJECT)
-
-ASN1_STRING *	ASN1_STRING_new(void);
-void		ASN1_STRING_free(ASN1_STRING *a);
-ASN1_STRING *	ASN1_STRING_dup(ASN1_STRING *a);
-ASN1_STRING *	ASN1_STRING_type_new(int type );
-int 		ASN1_STRING_cmp(ASN1_STRING *a, ASN1_STRING *b);
-  /* Since this is used to store all sorts of things, via macros, for now, make
-     its data void * */
-int 		ASN1_STRING_set(ASN1_STRING *str, const void *data, int len);
-int ASN1_STRING_length(ASN1_STRING *x);
-void ASN1_STRING_length_set(ASN1_STRING *x, int n);
-int ASN1_STRING_type(ASN1_STRING *x);
-unsigned char * ASN1_STRING_data(ASN1_STRING *x);
-
-DECLARE_ASN1_FUNCTIONS(ASN1_BIT_STRING)
-int		i2c_ASN1_BIT_STRING(ASN1_BIT_STRING *a,unsigned char **pp);
-ASN1_BIT_STRING *c2i_ASN1_BIT_STRING(ASN1_BIT_STRING **a,const unsigned char **pp,
-			long length);
-int		ASN1_BIT_STRING_set(ASN1_BIT_STRING *a, unsigned char *d,
-			int length );
-int		ASN1_BIT_STRING_set_bit(ASN1_BIT_STRING *a, int n, int value);
-int		ASN1_BIT_STRING_get_bit(ASN1_BIT_STRING *a, int n);
-
-#ifndef OPENSSL_NO_BIO
-int ASN1_BIT_STRING_name_print(BIO *out, ASN1_BIT_STRING *bs,
-				BIT_STRING_BITNAME *tbl, int indent);
-#endif
-int ASN1_BIT_STRING_num_asc(char *name, BIT_STRING_BITNAME *tbl);
-int ASN1_BIT_STRING_set_asc(ASN1_BIT_STRING *bs, char *name, int value,
-				BIT_STRING_BITNAME *tbl);
-
-int		i2d_ASN1_BOOLEAN(int a,unsigned char **pp);
-int 		d2i_ASN1_BOOLEAN(int *a,const unsigned char **pp,long length);
-
-DECLARE_ASN1_FUNCTIONS(ASN1_INTEGER)
-int		i2c_ASN1_INTEGER(ASN1_INTEGER *a,unsigned char **pp);
-ASN1_INTEGER *c2i_ASN1_INTEGER(ASN1_INTEGER **a,const unsigned char **pp,
-			long length);
-ASN1_INTEGER *d2i_ASN1_UINTEGER(ASN1_INTEGER **a,const unsigned char **pp,
-			long length);
-ASN1_INTEGER *	ASN1_INTEGER_dup(ASN1_INTEGER *x);
-int ASN1_INTEGER_cmp(ASN1_INTEGER *x, ASN1_INTEGER *y);
-
-DECLARE_ASN1_FUNCTIONS(ASN1_ENUMERATED)
-
-int ASN1_UTCTIME_check(ASN1_UTCTIME *a);
-ASN1_UTCTIME *ASN1_UTCTIME_set(ASN1_UTCTIME *s,time_t t);
-int ASN1_UTCTIME_set_string(ASN1_UTCTIME *s, const char *str);
-int ASN1_UTCTIME_cmp_time_t(const ASN1_UTCTIME *s, time_t t);
-#if 0
-time_t ASN1_UTCTIME_get(const ASN1_UTCTIME *s);
-#endif
-
-int ASN1_GENERALIZEDTIME_check(ASN1_GENERALIZEDTIME *a);
-ASN1_GENERALIZEDTIME *ASN1_GENERALIZEDTIME_set(ASN1_GENERALIZEDTIME *s,time_t t);
-int ASN1_GENERALIZEDTIME_set_string(ASN1_GENERALIZEDTIME *s, const char *str);
-
-DECLARE_ASN1_FUNCTIONS(ASN1_OCTET_STRING)
-ASN1_OCTET_STRING *	ASN1_OCTET_STRING_dup(ASN1_OCTET_STRING *a);
-int 	ASN1_OCTET_STRING_cmp(ASN1_OCTET_STRING *a, ASN1_OCTET_STRING *b);
-int 	ASN1_OCTET_STRING_set(ASN1_OCTET_STRING *str, const unsigned char *data, int len);
-
-DECLARE_ASN1_FUNCTIONS(ASN1_VISIBLESTRING)
-DECLARE_ASN1_FUNCTIONS(ASN1_UNIVERSALSTRING)
-DECLARE_ASN1_FUNCTIONS(ASN1_UTF8STRING)
-DECLARE_ASN1_FUNCTIONS(ASN1_NULL)
-DECLARE_ASN1_FUNCTIONS(ASN1_BMPSTRING)
-
-int UTF8_getc(const unsigned char *str, int len, unsigned long *val);
-int UTF8_putc(unsigned char *str, int len, unsigned long value);
-
-DECLARE_ASN1_FUNCTIONS_name(ASN1_STRING, ASN1_PRINTABLE)
-
-DECLARE_ASN1_FUNCTIONS_name(ASN1_STRING, DIRECTORYSTRING)
-DECLARE_ASN1_FUNCTIONS_name(ASN1_STRING, DISPLAYTEXT)
-DECLARE_ASN1_FUNCTIONS(ASN1_PRINTABLESTRING)
-DECLARE_ASN1_FUNCTIONS(ASN1_T61STRING)
-DECLARE_ASN1_FUNCTIONS(ASN1_IA5STRING)
-DECLARE_ASN1_FUNCTIONS(ASN1_GENERALSTRING)
-DECLARE_ASN1_FUNCTIONS(ASN1_UTCTIME)
-DECLARE_ASN1_FUNCTIONS(ASN1_GENERALIZEDTIME)
-DECLARE_ASN1_FUNCTIONS(ASN1_TIME)
-
-DECLARE_ASN1_ITEM(ASN1_OCTET_STRING_NDEF)
-
-ASN1_TIME *ASN1_TIME_set(ASN1_TIME *s,time_t t);
-int ASN1_TIME_check(ASN1_TIME *t);
-ASN1_GENERALIZEDTIME *ASN1_TIME_to_generalizedtime(ASN1_TIME *t, ASN1_GENERALIZEDTIME **out);
-
-int i2d_ASN1_SET(STACK *a, unsigned char **pp,
-		 i2d_of_void *i2d, int ex_tag, int ex_class, int is_set);
-STACK *	d2i_ASN1_SET(STACK **a, const unsigned char **pp, long length,
-		     d2i_of_void *d2i, void (*free_func)(void *),
-		     int ex_tag, int ex_class);
-
-#ifndef OPENSSL_NO_BIO
-int i2a_ASN1_INTEGER(BIO *bp, ASN1_INTEGER *a);
-int a2i_ASN1_INTEGER(BIO *bp,ASN1_INTEGER *bs,char *buf,int size);
-int i2a_ASN1_ENUMERATED(BIO *bp, ASN1_ENUMERATED *a);
-int a2i_ASN1_ENUMERATED(BIO *bp,ASN1_ENUMERATED *bs,char *buf,int size);
-int i2a_ASN1_OBJECT(BIO *bp,ASN1_OBJECT *a);
-int a2i_ASN1_STRING(BIO *bp,ASN1_STRING *bs,char *buf,int size);
-int i2a_ASN1_STRING(BIO *bp, ASN1_STRING *a, int type);
-#endif
-int i2t_ASN1_OBJECT(char *buf,int buf_len,ASN1_OBJECT *a);
-
-int a2d_ASN1_OBJECT(unsigned char *out,int olen, const char *buf, int num);
-ASN1_OBJECT *ASN1_OBJECT_create(int nid, unsigned char *data,int len,
-	const char *sn, const char *ln);
-
-int ASN1_INTEGER_set(ASN1_INTEGER *a, long v);
-long ASN1_INTEGER_get(ASN1_INTEGER *a);
-ASN1_INTEGER *BN_to_ASN1_INTEGER(BIGNUM *bn, ASN1_INTEGER *ai);
-BIGNUM *ASN1_INTEGER_to_BN(ASN1_INTEGER *ai,BIGNUM *bn);
-
-int ASN1_ENUMERATED_set(ASN1_ENUMERATED *a, long v);
-long ASN1_ENUMERATED_get(ASN1_ENUMERATED *a);
-ASN1_ENUMERATED *BN_to_ASN1_ENUMERATED(BIGNUM *bn, ASN1_ENUMERATED *ai);
-BIGNUM *ASN1_ENUMERATED_to_BN(ASN1_ENUMERATED *ai,BIGNUM *bn);
-
-/* General */
-/* given a string, return the correct type, max is the maximum length */
-int ASN1_PRINTABLE_type(const unsigned char *s, int max);
-
-int i2d_ASN1_bytes(ASN1_STRING *a, unsigned char **pp, int tag, int xclass);
-ASN1_STRING *d2i_ASN1_bytes(ASN1_STRING **a, const unsigned char **pp,
-	long length, int Ptag, int Pclass);
-unsigned long ASN1_tag2bit(int tag);
-/* type is one or more of the B_ASN1_ values. */
-ASN1_STRING *d2i_ASN1_type_bytes(ASN1_STRING **a,const unsigned char **pp,
-		long length,int type);
-
-/* PARSING */
-int asn1_Finish(ASN1_CTX *c);
-int asn1_const_Finish(ASN1_const_CTX *c);
-
-/* SPECIALS */
-int ASN1_get_object(const unsigned char **pp, long *plength, int *ptag,
-	int *pclass, long omax);
-int ASN1_check_infinite_end(unsigned char **p,long len);
-int ASN1_const_check_infinite_end(const unsigned char **p,long len);
-void ASN1_put_object(unsigned char **pp, int constructed, int length,
-	int tag, int xclass);
-int ASN1_put_eoc(unsigned char **pp);
-int ASN1_object_size(int constructed, int length, int tag);
-
-/* Used to implement other functions */
-void *ASN1_dup(i2d_of_void *i2d, d2i_of_void *d2i, char *x);
-#define ASN1_dup_of(type,i2d,d2i,x) \
-	((type *(*)(I2D_OF(type),D2I_OF(type),type *))openssl_fcast(ASN1_dup))(i2d,d2i,x)
-#define ASN1_dup_of_const(type,i2d,d2i,x) \
-	((type *(*)(I2D_OF_const(type),D2I_OF(type),type *))openssl_fcast(ASN1_dup))(i2d,d2i,x)
-
-void *ASN1_item_dup(const ASN1_ITEM *it, void *x);
-
-#ifndef OPENSSL_NO_FP_API
-void *ASN1_d2i_fp(void *(*xnew)(void), d2i_of_void *d2i, FILE *in, void **x);
-#define ASN1_d2i_fp_of(type,xnew,d2i,in,x) \
-	((type *(*)(type *(*)(void),D2I_OF(type),FILE *,type **))openssl_fcast(ASN1_d2i_fp))(xnew,d2i,in,x)
-void *ASN1_item_d2i_fp(const ASN1_ITEM *it, FILE *in, void *x);
-int ASN1_i2d_fp(i2d_of_void *i2d,FILE *out,void *x);
-#define ASN1_i2d_fp_of(type,i2d,out,x) \
-	((int (*)(I2D_OF(type),FILE *,type *))openssl_fcast(ASN1_i2d_fp))(i2d,out,x)
-#define ASN1_i2d_fp_of_const(type,i2d,out,x) \
-	((int (*)(I2D_OF_const(type),FILE *,type *))openssl_fcast(ASN1_i2d_fp))(i2d,out,x)
-int ASN1_item_i2d_fp(const ASN1_ITEM *it, FILE *out, void *x);
-int ASN1_STRING_print_ex_fp(FILE *fp, ASN1_STRING *str, unsigned long flags);
-#endif
-
-int ASN1_STRING_to_UTF8(unsigned char **out, ASN1_STRING *in);
-
-#ifndef OPENSSL_NO_BIO
-void *ASN1_d2i_bio(void *(*xnew)(void), d2i_of_void *d2i, BIO *in, void **x);
-#define ASN1_d2i_bio_of(type,xnew,d2i,in,x) \
-	((type *(*)(type *(*)(void),D2I_OF(type),BIO *,type **))openssl_fcast(ASN1_d2i_bio))(xnew,d2i,in,x)
-void *ASN1_item_d2i_bio(const ASN1_ITEM *it, BIO *in, void *x);
-int ASN1_i2d_bio(i2d_of_void *i2d,BIO *out, unsigned char *x);
-#define ASN1_i2d_bio_of(type,i2d,out,x) \
-	((int (*)(I2D_OF(type),BIO *,type *))openssl_fcast(ASN1_i2d_bio))(i2d,out,x)
-#define ASN1_i2d_bio_of_const(type,i2d,out,x) \
-	((int (*)(I2D_OF_const(type),BIO *,const type *))openssl_fcast(ASN1_i2d_bio))(i2d,out,x)
-int ASN1_item_i2d_bio(const ASN1_ITEM *it, BIO *out, void *x);
-int ASN1_UTCTIME_print(BIO *fp,ASN1_UTCTIME *a);
-int ASN1_GENERALIZEDTIME_print(BIO *fp,ASN1_GENERALIZEDTIME *a);
-int ASN1_TIME_print(BIO *fp,ASN1_TIME *a);
-int ASN1_STRING_print(BIO *bp,ASN1_STRING *v);
-int ASN1_STRING_print_ex(BIO *out, ASN1_STRING *str, unsigned long flags);
-int ASN1_parse(BIO *bp,const unsigned char *pp,long len,int indent);
-int ASN1_parse_dump(BIO *bp,const unsigned char *pp,long len,int indent,int dump);
-#endif
-const char *ASN1_tag2str(int tag);
-
-/* Used to load and write netscape format cert/key */
-int i2d_ASN1_HEADER(ASN1_HEADER *a,unsigned char **pp);
-ASN1_HEADER *d2i_ASN1_HEADER(ASN1_HEADER **a,const unsigned char **pp, long length);
-ASN1_HEADER *ASN1_HEADER_new(void );
-void ASN1_HEADER_free(ASN1_HEADER *a);
-
-int ASN1_UNIVERSALSTRING_to_string(ASN1_UNIVERSALSTRING *s);
-
-/* Not used that much at this point, except for the first two */
-ASN1_METHOD *X509_asn1_meth(void);
-ASN1_METHOD *RSAPrivateKey_asn1_meth(void);
-ASN1_METHOD *ASN1_IA5STRING_asn1_meth(void);
-ASN1_METHOD *ASN1_BIT_STRING_asn1_meth(void);
-
-int ASN1_TYPE_set_octetstring(ASN1_TYPE *a,
-	unsigned char *data, int len);
-int ASN1_TYPE_get_octetstring(ASN1_TYPE *a,
-	unsigned char *data, int max_len);
-int ASN1_TYPE_set_int_octetstring(ASN1_TYPE *a, long num,
-	unsigned char *data, int len);
-int ASN1_TYPE_get_int_octetstring(ASN1_TYPE *a,long *num,
-	unsigned char *data, int max_len);
-
-STACK *ASN1_seq_unpack(const unsigned char *buf, int len,
-		       d2i_of_void *d2i, void (*free_func)(void *));
-unsigned char *ASN1_seq_pack(STACK *safes, i2d_of_void *i2d,
-			     unsigned char **buf, int *len );
-void *ASN1_unpack_string(ASN1_STRING *oct, d2i_of_void *d2i);
-void *ASN1_item_unpack(ASN1_STRING *oct, const ASN1_ITEM *it);
-ASN1_STRING *ASN1_pack_string(void *obj, i2d_of_void *i2d,
-			      ASN1_OCTET_STRING **oct);
-#define ASN1_pack_string_of(type,obj,i2d,oct) \
-	((ASN1_STRING *(*)(type *,I2D_OF(type),ASN1_OCTET_STRING **))openssl_fcast(ASN1_pack_string))(obj,i2d,oct)
-ASN1_STRING *ASN1_item_pack(void *obj, const ASN1_ITEM *it, ASN1_OCTET_STRING **oct);
-
-void ASN1_STRING_set_default_mask(unsigned long mask);
-int ASN1_STRING_set_default_mask_asc(char *p);
-unsigned long ASN1_STRING_get_default_mask(void);
-int ASN1_mbstring_copy(ASN1_STRING **out, const unsigned char *in, int len,
-					int inform, unsigned long mask);
-int ASN1_mbstring_ncopy(ASN1_STRING **out, const unsigned char *in, int len,
-					int inform, unsigned long mask, 
-					long minsize, long maxsize);
-
-ASN1_STRING *ASN1_STRING_set_by_NID(ASN1_STRING **out, 
-		const unsigned char *in, int inlen, int inform, int nid);
-ASN1_STRING_TABLE *ASN1_STRING_TABLE_get(int nid);
-int ASN1_STRING_TABLE_add(int, long, long, unsigned long, unsigned long);
-void ASN1_STRING_TABLE_cleanup(void);
-
-/* ASN1 template functions */
-
-/* Old API compatible functions */
-ASN1_VALUE *ASN1_item_new(const ASN1_ITEM *it);
-void ASN1_item_free(ASN1_VALUE *val, const ASN1_ITEM *it);
-ASN1_VALUE * ASN1_item_d2i(ASN1_VALUE **val, const unsigned char **in, long len, const ASN1_ITEM *it);
-int ASN1_item_i2d(ASN1_VALUE *val, unsigned char **out, const ASN1_ITEM *it);
-int ASN1_item_ndef_i2d(ASN1_VALUE *val, unsigned char **out, const ASN1_ITEM *it);
-
-void ASN1_add_oid_module(void);
-
-ASN1_TYPE *ASN1_generate_nconf(char *str, CONF *nconf);
-ASN1_TYPE *ASN1_generate_v3(char *str, X509V3_CTX *cnf);
-	
-/* BEGIN ERROR CODES */
-/* The following lines are auto generated by the script mkerr.pl. Any changes
- * made after this point may be overwritten when the script is next run.
- */
-void ERR_load_ASN1_strings(void);
-
-/* Error codes for the ASN1 functions. */
-
-/* Function codes. */
-#define ASN1_F_A2D_ASN1_OBJECT				 100
-#define ASN1_F_A2I_ASN1_ENUMERATED			 101
-#define ASN1_F_A2I_ASN1_INTEGER				 102
-#define ASN1_F_A2I_ASN1_STRING				 103
-#define ASN1_F_APPEND_EXP				 176
-#define ASN1_F_ASN1_BIT_STRING_SET_BIT			 183
-#define ASN1_F_ASN1_CB					 177
-#define ASN1_F_ASN1_CHECK_TLEN				 104
-#define ASN1_F_ASN1_COLLATE_PRIMITIVE			 105
-#define ASN1_F_ASN1_COLLECT				 106
-#define ASN1_F_ASN1_D2I_EX_PRIMITIVE			 108
-#define ASN1_F_ASN1_D2I_FP				 109
-#define ASN1_F_ASN1_D2I_READ_BIO			 107
-#define ASN1_F_ASN1_DIGEST				 184
-#define ASN1_F_ASN1_DO_ADB				 110
-#define ASN1_F_ASN1_DUP					 111
-#define ASN1_F_ASN1_ENUMERATED_SET			 112
-#define ASN1_F_ASN1_ENUMERATED_TO_BN			 113
-#define ASN1_F_ASN1_EX_C2I				 204
-#define ASN1_F_ASN1_FIND_END				 190
-#define ASN1_F_ASN1_GENERALIZEDTIME_SET			 185
-#define ASN1_F_ASN1_GENERATE_V3				 178
-#define ASN1_F_ASN1_GET_OBJECT				 114
-#define ASN1_F_ASN1_HEADER_NEW				 115
-#define ASN1_F_ASN1_I2D_BIO				 116
-#define ASN1_F_ASN1_I2D_FP				 117
-#define ASN1_F_ASN1_INTEGER_SET				 118
-#define ASN1_F_ASN1_INTEGER_TO_BN			 119
-#define ASN1_F_ASN1_ITEM_D2I_FP				 206
-#define ASN1_F_ASN1_ITEM_DUP				 191
-#define ASN1_F_ASN1_ITEM_EX_COMBINE_NEW			 121
-#define ASN1_F_ASN1_ITEM_EX_D2I				 120
-#define ASN1_F_ASN1_ITEM_I2D_BIO			 192
-#define ASN1_F_ASN1_ITEM_I2D_FP				 193
-#define ASN1_F_ASN1_ITEM_PACK				 198
-#define ASN1_F_ASN1_ITEM_SIGN				 195
-#define ASN1_F_ASN1_ITEM_UNPACK				 199
-#define ASN1_F_ASN1_ITEM_VERIFY				 197
-#define ASN1_F_ASN1_MBSTRING_NCOPY			 122
-#define ASN1_F_ASN1_OBJECT_NEW				 123
-#define ASN1_F_ASN1_PACK_STRING				 124
-#define ASN1_F_ASN1_PCTX_NEW				 205
-#define ASN1_F_ASN1_PKCS5_PBE_SET			 125
-#define ASN1_F_ASN1_SEQ_PACK				 126
-#define ASN1_F_ASN1_SEQ_UNPACK				 127
-#define ASN1_F_ASN1_SIGN				 128
-#define ASN1_F_ASN1_STR2TYPE				 179
-#define ASN1_F_ASN1_STRING_SET				 186
-#define ASN1_F_ASN1_STRING_TABLE_ADD			 129
-#define ASN1_F_ASN1_STRING_TYPE_NEW			 130
-#define ASN1_F_ASN1_TEMPLATE_EX_D2I			 132
-#define ASN1_F_ASN1_TEMPLATE_NEW			 133
-#define ASN1_F_ASN1_TEMPLATE_NOEXP_D2I			 131
-#define ASN1_F_ASN1_TIME_SET				 175
-#define ASN1_F_ASN1_TYPE_GET_INT_OCTETSTRING		 134
-#define ASN1_F_ASN1_TYPE_GET_OCTETSTRING		 135
-#define ASN1_F_ASN1_UNPACK_STRING			 136
-#define ASN1_F_ASN1_UTCTIME_SET				 187
-#define ASN1_F_ASN1_VERIFY				 137
-#define ASN1_F_BITSTR_CB				 180
-#define ASN1_F_BN_TO_ASN1_ENUMERATED			 138
-#define ASN1_F_BN_TO_ASN1_INTEGER			 139
-#define ASN1_F_C2I_ASN1_BIT_STRING			 189
-#define ASN1_F_C2I_ASN1_INTEGER				 194
-#define ASN1_F_C2I_ASN1_OBJECT				 196
-#define ASN1_F_COLLECT_DATA				 140
-#define ASN1_F_D2I_ASN1_BIT_STRING			 141
-#define ASN1_F_D2I_ASN1_BOOLEAN				 142
-#define ASN1_F_D2I_ASN1_BYTES				 143
-#define ASN1_F_D2I_ASN1_GENERALIZEDTIME			 144
-#define ASN1_F_D2I_ASN1_HEADER				 145
-#define ASN1_F_D2I_ASN1_INTEGER				 146
-#define ASN1_F_D2I_ASN1_OBJECT				 147
-#define ASN1_F_D2I_ASN1_SET				 148
-#define ASN1_F_D2I_ASN1_TYPE_BYTES			 149
-#define ASN1_F_D2I_ASN1_UINTEGER			 150
-#define ASN1_F_D2I_ASN1_UTCTIME				 151
-#define ASN1_F_D2I_NETSCAPE_RSA				 152
-#define ASN1_F_D2I_NETSCAPE_RSA_2			 153
-#define ASN1_F_D2I_PRIVATEKEY				 154
-#define ASN1_F_D2I_PUBLICKEY				 155
-#define ASN1_F_D2I_RSA_NET				 200
-#define ASN1_F_D2I_RSA_NET_2				 201
-#define ASN1_F_D2I_X509					 156
-#define ASN1_F_D2I_X509_CINF				 157
-#define ASN1_F_D2I_X509_PKEY				 159
-#define ASN1_F_I2D_ASN1_SET				 188
-#define ASN1_F_I2D_ASN1_TIME				 160
-#define ASN1_F_I2D_DSA_PUBKEY				 161
-#define ASN1_F_I2D_EC_PUBKEY				 181
-#define ASN1_F_I2D_PRIVATEKEY				 163
-#define ASN1_F_I2D_PUBLICKEY				 164
-#define ASN1_F_I2D_RSA_NET				 162
-#define ASN1_F_I2D_RSA_PUBKEY				 165
-#define ASN1_F_LONG_C2I					 166
-#define ASN1_F_OID_MODULE_INIT				 174
-#define ASN1_F_PARSE_TAGGING				 182
-#define ASN1_F_PKCS5_PBE2_SET				 167
-#define ASN1_F_PKCS5_PBE_SET				 202
-#define ASN1_F_X509_CINF_NEW				 168
-#define ASN1_F_X509_CRL_ADD0_REVOKED			 169
-#define ASN1_F_X509_INFO_NEW				 170
-#define ASN1_F_X509_NAME_ENCODE				 203
-#define ASN1_F_X509_NAME_EX_D2I				 158
-#define ASN1_F_X509_NAME_EX_NEW				 171
-#define ASN1_F_X509_NEW					 172
-#define ASN1_F_X509_PKEY_NEW				 173
-
-/* Reason codes. */
-#define ASN1_R_ADDING_OBJECT				 171
-#define ASN1_R_AUX_ERROR				 100
-#define ASN1_R_BAD_CLASS				 101
-#define ASN1_R_BAD_OBJECT_HEADER			 102
-#define ASN1_R_BAD_PASSWORD_READ			 103
-#define ASN1_R_BAD_TAG					 104
-#define ASN1_R_BN_LIB					 105
-#define ASN1_R_BOOLEAN_IS_WRONG_LENGTH			 106
-#define ASN1_R_BUFFER_TOO_SMALL				 107
-#define ASN1_R_CIPHER_HAS_NO_OBJECT_IDENTIFIER		 108
-#define ASN1_R_DATA_IS_WRONG				 109
-#define ASN1_R_DECODE_ERROR				 110
-#define ASN1_R_DECODING_ERROR				 111
-#define ASN1_R_DEPTH_EXCEEDED				 174
-#define ASN1_R_ENCODE_ERROR				 112
-#define ASN1_R_ERROR_GETTING_TIME			 173
-#define ASN1_R_ERROR_LOADING_SECTION			 172
-#define ASN1_R_ERROR_PARSING_SET_ELEMENT		 113
-#define ASN1_R_ERROR_SETTING_CIPHER_PARAMS		 114
-#define ASN1_R_EXPECTING_AN_INTEGER			 115
-#define ASN1_R_EXPECTING_AN_OBJECT			 116
-#define ASN1_R_EXPECTING_A_BOOLEAN			 117
-#define ASN1_R_EXPECTING_A_TIME				 118
-#define ASN1_R_EXPLICIT_LENGTH_MISMATCH			 119
-#define ASN1_R_EXPLICIT_TAG_NOT_CONSTRUCTED		 120
-#define ASN1_R_FIELD_MISSING				 121
-#define ASN1_R_FIRST_NUM_TOO_LARGE			 122
-#define ASN1_R_HEADER_TOO_LONG				 123
-#define ASN1_R_ILLEGAL_BITSTRING_FORMAT			 175
-#define ASN1_R_ILLEGAL_BOOLEAN				 176
-#define ASN1_R_ILLEGAL_CHARACTERS			 124
-#define ASN1_R_ILLEGAL_FORMAT				 177
-#define ASN1_R_ILLEGAL_HEX				 178
-#define ASN1_R_ILLEGAL_IMPLICIT_TAG			 179
-#define ASN1_R_ILLEGAL_INTEGER				 180
-#define ASN1_R_ILLEGAL_NESTED_TAGGING			 181
-#define ASN1_R_ILLEGAL_NULL				 125
-#define ASN1_R_ILLEGAL_NULL_VALUE			 182
-#define ASN1_R_ILLEGAL_OBJECT				 183
-#define ASN1_R_ILLEGAL_OPTIONAL_ANY			 126
-#define ASN1_R_ILLEGAL_OPTIONS_ON_ITEM_TEMPLATE		 170
-#define ASN1_R_ILLEGAL_TAGGED_ANY			 127
-#define ASN1_R_ILLEGAL_TIME_VALUE			 184
-#define ASN1_R_INTEGER_NOT_ASCII_FORMAT			 185
-#define ASN1_R_INTEGER_TOO_LARGE_FOR_LONG		 128
-#define ASN1_R_INVALID_BMPSTRING_LENGTH			 129
-#define ASN1_R_INVALID_DIGIT				 130
-#define ASN1_R_INVALID_MODIFIER				 186
-#define ASN1_R_INVALID_NUMBER				 187
-#define ASN1_R_INVALID_SEPARATOR			 131
-#define ASN1_R_INVALID_TIME_FORMAT			 132
-#define ASN1_R_INVALID_UNIVERSALSTRING_LENGTH		 133
-#define ASN1_R_INVALID_UTF8STRING			 134
-#define ASN1_R_IV_TOO_LARGE				 135
-#define ASN1_R_LENGTH_ERROR				 136
-#define ASN1_R_LIST_ERROR				 188
-#define ASN1_R_MISSING_EOC				 137
-#define ASN1_R_MISSING_SECOND_NUMBER			 138
-#define ASN1_R_MISSING_VALUE				 189
-#define ASN1_R_MSTRING_NOT_UNIVERSAL			 139
-#define ASN1_R_MSTRING_WRONG_TAG			 140
-#define ASN1_R_NESTED_ASN1_STRING			 197
-#define ASN1_R_NON_HEX_CHARACTERS			 141
-#define ASN1_R_NOT_ASCII_FORMAT				 190
-#define ASN1_R_NOT_ENOUGH_DATA				 142
-#define ASN1_R_NO_MATCHING_CHOICE_TYPE			 143
-#define ASN1_R_NULL_IS_WRONG_LENGTH			 144
-#define ASN1_R_OBJECT_NOT_ASCII_FORMAT			 191
-#define ASN1_R_ODD_NUMBER_OF_CHARS			 145
-#define ASN1_R_PRIVATE_KEY_HEADER_MISSING		 146
-#define ASN1_R_SECOND_NUMBER_TOO_LARGE			 147
-#define ASN1_R_SEQUENCE_LENGTH_MISMATCH			 148
-#define ASN1_R_SEQUENCE_NOT_CONSTRUCTED			 149
-#define ASN1_R_SEQUENCE_OR_SET_NEEDS_CONFIG		 192
-#define ASN1_R_SHORT_LINE				 150
-#define ASN1_R_STRING_TOO_LONG				 151
-#define ASN1_R_STRING_TOO_SHORT				 152
-#define ASN1_R_TAG_VALUE_TOO_HIGH			 153
-#define ASN1_R_THE_ASN1_OBJECT_IDENTIFIER_IS_NOT_KNOWN_FOR_THIS_MD 154
-#define ASN1_R_TIME_NOT_ASCII_FORMAT			 193
-#define ASN1_R_TOO_LONG					 155
-#define ASN1_R_TYPE_NOT_CONSTRUCTED			 156
-#define ASN1_R_UNABLE_TO_DECODE_RSA_KEY			 157
-#define ASN1_R_UNABLE_TO_DECODE_RSA_PRIVATE_KEY		 158
-#define ASN1_R_UNEXPECTED_EOC				 159
-#define ASN1_R_UNKNOWN_FORMAT				 160
-#define ASN1_R_UNKNOWN_MESSAGE_DIGEST_ALGORITHM		 161
-#define ASN1_R_UNKNOWN_OBJECT_TYPE			 162
-#define ASN1_R_UNKNOWN_PUBLIC_KEY_TYPE			 163
-#define ASN1_R_UNKNOWN_TAG				 194
-#define ASN1_R_UNKOWN_FORMAT				 195
-#define ASN1_R_UNSUPPORTED_ANY_DEFINED_BY_TYPE		 164
-#define ASN1_R_UNSUPPORTED_CIPHER			 165
-#define ASN1_R_UNSUPPORTED_ENCRYPTION_ALGORITHM		 166
-#define ASN1_R_UNSUPPORTED_PUBLIC_KEY_TYPE		 167
-#define ASN1_R_UNSUPPORTED_TYPE				 196
-#define ASN1_R_WRONG_TAG				 168
-#define ASN1_R_WRONG_TYPE				 169
-
-#ifdef  __cplusplus
-}
-#endif
-#endif
diff --git a/crypto/openssl/crypto/asn1/asn1_err.c b/crypto/openssl/crypto/asn1/asn1_err.c
deleted file mode 100644
index f6b5c3f3dd77..000000000000
--- a/crypto/openssl/crypto/asn1/asn1_err.c
+++ /dev/null
@@ -1,298 +0,0 @@
-/* crypto/asn1/asn1_err.c */
-/* ====================================================================
- * Copyright (c) 1999-2005 The OpenSSL Project.  All rights reserved.
- *
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions
- * are met:
- *
- * 1. Redistributions of source code must retain the above copyright
- *    notice, this list of conditions and the following disclaimer. 
- *
- * 2. Redistributions in binary form must reproduce the above copyright
- *    notice, this list of conditions and the following disclaimer in
- *    the documentation and/or other materials provided with the
- *    distribution.
- *
- * 3. All advertising materials mentioning features or use of this
- *    software must display the following acknowledgment:
- *    "This product includes software developed by the OpenSSL Project
- *    for use in the OpenSSL Toolkit. (http://www.OpenSSL.org/)"
- *
- * 4. The names "OpenSSL Toolkit" and "OpenSSL Project" must not be used to
- *    endorse or promote products derived from this software without
- *    prior written permission. For written permission, please contact
- *    openssl-core@OpenSSL.org.
- *
- * 5. Products derived from this software may not be called "OpenSSL"
- *    nor may "OpenSSL" appear in their names without prior written
- *    permission of the OpenSSL Project.
- *
- * 6. Redistributions of any form whatsoever must retain the following
- *    acknowledgment:
- *    "This product includes software developed by the OpenSSL Project
- *    for use in the OpenSSL Toolkit (http://www.OpenSSL.org/)"
- *
- * THIS SOFTWARE IS PROVIDED BY THE OpenSSL PROJECT ``AS IS'' AND ANY
- * EXPRESSED OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
- * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR
- * PURPOSE ARE DISCLAIMED.  IN NO EVENT SHALL THE OpenSSL PROJECT OR
- * ITS CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
- * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
- * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
- * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
- * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
- * STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
- * ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED
- * OF THE POSSIBILITY OF SUCH DAMAGE.
- * ====================================================================
- *
- * This product includes cryptographic software written by Eric Young
- * (eay@cryptsoft.com).  This product includes software written by Tim
- * Hudson (tjh@cryptsoft.com).
- *
- */
-
-/* NOTE: this file was auto generated by the mkerr.pl script: any changes
- * made to it will be overwritten when the script next updates this file,
- * only reason strings will be preserved.
- */
-
-#include <stdio.h>
-#include <openssl/err.h>
-#include <openssl/asn1.h>
-
-/* BEGIN ERROR CODES */
-#ifndef OPENSSL_NO_ERR
-
-#define ERR_FUNC(func) ERR_PACK(ERR_LIB_ASN1,func,0)
-#define ERR_REASON(reason) ERR_PACK(ERR_LIB_ASN1,0,reason)
-
-static ERR_STRING_DATA ASN1_str_functs[]=
-	{
-{ERR_FUNC(ASN1_F_A2D_ASN1_OBJECT),	"a2d_ASN1_OBJECT"},
-{ERR_FUNC(ASN1_F_A2I_ASN1_ENUMERATED),	"a2i_ASN1_ENUMERATED"},
-{ERR_FUNC(ASN1_F_A2I_ASN1_INTEGER),	"a2i_ASN1_INTEGER"},
-{ERR_FUNC(ASN1_F_A2I_ASN1_STRING),	"a2i_ASN1_STRING"},
-{ERR_FUNC(ASN1_F_APPEND_EXP),	"APPEND_EXP"},
-{ERR_FUNC(ASN1_F_ASN1_BIT_STRING_SET_BIT),	"ASN1_BIT_STRING_set_bit"},
-{ERR_FUNC(ASN1_F_ASN1_CB),	"ASN1_CB"},
-{ERR_FUNC(ASN1_F_ASN1_CHECK_TLEN),	"ASN1_CHECK_TLEN"},
-{ERR_FUNC(ASN1_F_ASN1_COLLATE_PRIMITIVE),	"ASN1_COLLATE_PRIMITIVE"},
-{ERR_FUNC(ASN1_F_ASN1_COLLECT),	"ASN1_COLLECT"},
-{ERR_FUNC(ASN1_F_ASN1_D2I_EX_PRIMITIVE),	"ASN1_D2I_EX_PRIMITIVE"},
-{ERR_FUNC(ASN1_F_ASN1_D2I_FP),	"ASN1_d2i_fp"},
-{ERR_FUNC(ASN1_F_ASN1_D2I_READ_BIO),	"ASN1_D2I_READ_BIO"},
-{ERR_FUNC(ASN1_F_ASN1_DIGEST),	"ASN1_digest"},
-{ERR_FUNC(ASN1_F_ASN1_DO_ADB),	"ASN1_DO_ADB"},
-{ERR_FUNC(ASN1_F_ASN1_DUP),	"ASN1_dup"},
-{ERR_FUNC(ASN1_F_ASN1_ENUMERATED_SET),	"ASN1_ENUMERATED_set"},
-{ERR_FUNC(ASN1_F_ASN1_ENUMERATED_TO_BN),	"ASN1_ENUMERATED_to_BN"},
-{ERR_FUNC(ASN1_F_ASN1_EX_C2I),	"ASN1_EX_C2I"},
-{ERR_FUNC(ASN1_F_ASN1_FIND_END),	"ASN1_FIND_END"},
-{ERR_FUNC(ASN1_F_ASN1_GENERALIZEDTIME_SET),	"ASN1_GENERALIZEDTIME_set"},
-{ERR_FUNC(ASN1_F_ASN1_GENERATE_V3),	"ASN1_generate_v3"},
-{ERR_FUNC(ASN1_F_ASN1_GET_OBJECT),	"ASN1_get_object"},
-{ERR_FUNC(ASN1_F_ASN1_HEADER_NEW),	"ASN1_HEADER_new"},
-{ERR_FUNC(ASN1_F_ASN1_I2D_BIO),	"ASN1_i2d_bio"},
-{ERR_FUNC(ASN1_F_ASN1_I2D_FP),	"ASN1_i2d_fp"},
-{ERR_FUNC(ASN1_F_ASN1_INTEGER_SET),	"ASN1_INTEGER_set"},
-{ERR_FUNC(ASN1_F_ASN1_INTEGER_TO_BN),	"ASN1_INTEGER_to_BN"},
-{ERR_FUNC(ASN1_F_ASN1_ITEM_D2I_FP),	"ASN1_item_d2i_fp"},
-{ERR_FUNC(ASN1_F_ASN1_ITEM_DUP),	"ASN1_item_dup"},
-{ERR_FUNC(ASN1_F_ASN1_ITEM_EX_COMBINE_NEW),	"ASN1_ITEM_EX_COMBINE_NEW"},
-{ERR_FUNC(ASN1_F_ASN1_ITEM_EX_D2I),	"ASN1_ITEM_EX_D2I"},
-{ERR_FUNC(ASN1_F_ASN1_ITEM_I2D_BIO),	"ASN1_item_i2d_bio"},
-{ERR_FUNC(ASN1_F_ASN1_ITEM_I2D_FP),	"ASN1_item_i2d_fp"},
-{ERR_FUNC(ASN1_F_ASN1_ITEM_PACK),	"ASN1_item_pack"},
-{ERR_FUNC(ASN1_F_ASN1_ITEM_SIGN),	"ASN1_item_sign"},
-{ERR_FUNC(ASN1_F_ASN1_ITEM_UNPACK),	"ASN1_item_unpack"},
-{ERR_FUNC(ASN1_F_ASN1_ITEM_VERIFY),	"ASN1_item_verify"},
-{ERR_FUNC(ASN1_F_ASN1_MBSTRING_NCOPY),	"ASN1_mbstring_ncopy"},
-{ERR_FUNC(ASN1_F_ASN1_OBJECT_NEW),	"ASN1_OBJECT_new"},
-{ERR_FUNC(ASN1_F_ASN1_PACK_STRING),	"ASN1_pack_string"},
-{ERR_FUNC(ASN1_F_ASN1_PCTX_NEW),	"ASN1_PCTX_NEW"},
-{ERR_FUNC(ASN1_F_ASN1_PKCS5_PBE_SET),	"ASN1_PKCS5_PBE_SET"},
-{ERR_FUNC(ASN1_F_ASN1_SEQ_PACK),	"ASN1_seq_pack"},
-{ERR_FUNC(ASN1_F_ASN1_SEQ_UNPACK),	"ASN1_seq_unpack"},
-{ERR_FUNC(ASN1_F_ASN1_SIGN),	"ASN1_sign"},
-{ERR_FUNC(ASN1_F_ASN1_STR2TYPE),	"ASN1_STR2TYPE"},
-{ERR_FUNC(ASN1_F_ASN1_STRING_SET),	"ASN1_STRING_set"},
-{ERR_FUNC(ASN1_F_ASN1_STRING_TABLE_ADD),	"ASN1_STRING_TABLE_add"},
-{ERR_FUNC(ASN1_F_ASN1_STRING_TYPE_NEW),	"ASN1_STRING_type_new"},
-{ERR_FUNC(ASN1_F_ASN1_TEMPLATE_EX_D2I),	"ASN1_TEMPLATE_EX_D2I"},
-{ERR_FUNC(ASN1_F_ASN1_TEMPLATE_NEW),	"ASN1_TEMPLATE_NEW"},
-{ERR_FUNC(ASN1_F_ASN1_TEMPLATE_NOEXP_D2I),	"ASN1_TEMPLATE_NOEXP_D2I"},
-{ERR_FUNC(ASN1_F_ASN1_TIME_SET),	"ASN1_TIME_set"},
-{ERR_FUNC(ASN1_F_ASN1_TYPE_GET_INT_OCTETSTRING),	"ASN1_TYPE_get_int_octetstring"},
-{ERR_FUNC(ASN1_F_ASN1_TYPE_GET_OCTETSTRING),	"ASN1_TYPE_get_octetstring"},
-{ERR_FUNC(ASN1_F_ASN1_UNPACK_STRING),	"ASN1_unpack_string"},
-{ERR_FUNC(ASN1_F_ASN1_UTCTIME_SET),	"ASN1_UTCTIME_set"},
-{ERR_FUNC(ASN1_F_ASN1_VERIFY),	"ASN1_verify"},
-{ERR_FUNC(ASN1_F_BITSTR_CB),	"BITSTR_CB"},
-{ERR_FUNC(ASN1_F_BN_TO_ASN1_ENUMERATED),	"BN_to_ASN1_ENUMERATED"},
-{ERR_FUNC(ASN1_F_BN_TO_ASN1_INTEGER),	"BN_to_ASN1_INTEGER"},
-{ERR_FUNC(ASN1_F_C2I_ASN1_BIT_STRING),	"c2i_ASN1_BIT_STRING"},
-{ERR_FUNC(ASN1_F_C2I_ASN1_INTEGER),	"c2i_ASN1_INTEGER"},
-{ERR_FUNC(ASN1_F_C2I_ASN1_OBJECT),	"c2i_ASN1_OBJECT"},
-{ERR_FUNC(ASN1_F_COLLECT_DATA),	"COLLECT_DATA"},
-{ERR_FUNC(ASN1_F_D2I_ASN1_BIT_STRING),	"D2I_ASN1_BIT_STRING"},
-{ERR_FUNC(ASN1_F_D2I_ASN1_BOOLEAN),	"d2i_ASN1_BOOLEAN"},
-{ERR_FUNC(ASN1_F_D2I_ASN1_BYTES),	"d2i_ASN1_bytes"},
-{ERR_FUNC(ASN1_F_D2I_ASN1_GENERALIZEDTIME),	"D2I_ASN1_GENERALIZEDTIME"},
-{ERR_FUNC(ASN1_F_D2I_ASN1_HEADER),	"d2i_ASN1_HEADER"},
-{ERR_FUNC(ASN1_F_D2I_ASN1_INTEGER),	"D2I_ASN1_INTEGER"},
-{ERR_FUNC(ASN1_F_D2I_ASN1_OBJECT),	"d2i_ASN1_OBJECT"},
-{ERR_FUNC(ASN1_F_D2I_ASN1_SET),	"d2i_ASN1_SET"},
-{ERR_FUNC(ASN1_F_D2I_ASN1_TYPE_BYTES),	"d2i_ASN1_type_bytes"},
-{ERR_FUNC(ASN1_F_D2I_ASN1_UINTEGER),	"d2i_ASN1_UINTEGER"},
-{ERR_FUNC(ASN1_F_D2I_ASN1_UTCTIME),	"D2I_ASN1_UTCTIME"},
-{ERR_FUNC(ASN1_F_D2I_NETSCAPE_RSA),	"d2i_Netscape_RSA"},
-{ERR_FUNC(ASN1_F_D2I_NETSCAPE_RSA_2),	"D2I_NETSCAPE_RSA_2"},
-{ERR_FUNC(ASN1_F_D2I_PRIVATEKEY),	"d2i_PrivateKey"},
-{ERR_FUNC(ASN1_F_D2I_PUBLICKEY),	"d2i_PublicKey"},
-{ERR_FUNC(ASN1_F_D2I_RSA_NET),	"d2i_RSA_NET"},
-{ERR_FUNC(ASN1_F_D2I_RSA_NET_2),	"D2I_RSA_NET_2"},
-{ERR_FUNC(ASN1_F_D2I_X509),	"D2I_X509"},
-{ERR_FUNC(ASN1_F_D2I_X509_CINF),	"D2I_X509_CINF"},
-{ERR_FUNC(ASN1_F_D2I_X509_PKEY),	"d2i_X509_PKEY"},
-{ERR_FUNC(ASN1_F_I2D_ASN1_SET),	"i2d_ASN1_SET"},
-{ERR_FUNC(ASN1_F_I2D_ASN1_TIME),	"I2D_ASN1_TIME"},
-{ERR_FUNC(ASN1_F_I2D_DSA_PUBKEY),	"i2d_DSA_PUBKEY"},
-{ERR_FUNC(ASN1_F_I2D_EC_PUBKEY),	"i2d_EC_PUBKEY"},
-{ERR_FUNC(ASN1_F_I2D_PRIVATEKEY),	"i2d_PrivateKey"},
-{ERR_FUNC(ASN1_F_I2D_PUBLICKEY),	"i2d_PublicKey"},
-{ERR_FUNC(ASN1_F_I2D_RSA_NET),	"i2d_RSA_NET"},
-{ERR_FUNC(ASN1_F_I2D_RSA_PUBKEY),	"i2d_RSA_PUBKEY"},
-{ERR_FUNC(ASN1_F_LONG_C2I),	"LONG_C2I"},
-{ERR_FUNC(ASN1_F_OID_MODULE_INIT),	"OID_MODULE_INIT"},
-{ERR_FUNC(ASN1_F_PARSE_TAGGING),	"PARSE_TAGGING"},
-{ERR_FUNC(ASN1_F_PKCS5_PBE2_SET),	"PKCS5_pbe2_set"},
-{ERR_FUNC(ASN1_F_PKCS5_PBE_SET),	"PKCS5_pbe_set"},
-{ERR_FUNC(ASN1_F_X509_CINF_NEW),	"X509_CINF_NEW"},
-{ERR_FUNC(ASN1_F_X509_CRL_ADD0_REVOKED),	"X509_CRL_add0_revoked"},
-{ERR_FUNC(ASN1_F_X509_INFO_NEW),	"X509_INFO_new"},
-{ERR_FUNC(ASN1_F_X509_NAME_ENCODE),	"X509_NAME_ENCODE"},
-{ERR_FUNC(ASN1_F_X509_NAME_EX_D2I),	"X509_NAME_EX_D2I"},
-{ERR_FUNC(ASN1_F_X509_NAME_EX_NEW),	"X509_NAME_EX_NEW"},
-{ERR_FUNC(ASN1_F_X509_NEW),	"X509_NEW"},
-{ERR_FUNC(ASN1_F_X509_PKEY_NEW),	"X509_PKEY_new"},
-{0,NULL}
-	};
-
-static ERR_STRING_DATA ASN1_str_reasons[]=
-	{
-{ERR_REASON(ASN1_R_ADDING_OBJECT)        ,"adding object"},
-{ERR_REASON(ASN1_R_AUX_ERROR)            ,"aux error"},
-{ERR_REASON(ASN1_R_BAD_CLASS)            ,"bad class"},
-{ERR_REASON(ASN1_R_BAD_OBJECT_HEADER)    ,"bad object header"},
-{ERR_REASON(ASN1_R_BAD_PASSWORD_READ)    ,"bad password read"},
-{ERR_REASON(ASN1_R_BAD_TAG)              ,"bad tag"},
-{ERR_REASON(ASN1_R_BN_LIB)               ,"bn lib"},
-{ERR_REASON(ASN1_R_BOOLEAN_IS_WRONG_LENGTH),"boolean is wrong length"},
-{ERR_REASON(ASN1_R_BUFFER_TOO_SMALL)     ,"buffer too small"},
-{ERR_REASON(ASN1_R_CIPHER_HAS_NO_OBJECT_IDENTIFIER),"cipher has no object identifier"},
-{ERR_REASON(ASN1_R_DATA_IS_WRONG)        ,"data is wrong"},
-{ERR_REASON(ASN1_R_DECODE_ERROR)         ,"decode error"},
-{ERR_REASON(ASN1_R_DECODING_ERROR)       ,"decoding error"},
-{ERR_REASON(ASN1_R_DEPTH_EXCEEDED)       ,"depth exceeded"},
-{ERR_REASON(ASN1_R_ENCODE_ERROR)         ,"encode error"},
-{ERR_REASON(ASN1_R_ERROR_GETTING_TIME)   ,"error getting time"},
-{ERR_REASON(ASN1_R_ERROR_LOADING_SECTION),"error loading section"},
-{ERR_REASON(ASN1_R_ERROR_PARSING_SET_ELEMENT),"error parsing set element"},
-{ERR_REASON(ASN1_R_ERROR_SETTING_CIPHER_PARAMS),"error setting cipher params"},
-{ERR_REASON(ASN1_R_EXPECTING_AN_INTEGER) ,"expecting an integer"},
-{ERR_REASON(ASN1_R_EXPECTING_AN_OBJECT)  ,"expecting an object"},
-{ERR_REASON(ASN1_R_EXPECTING_A_BOOLEAN)  ,"expecting a boolean"},
-{ERR_REASON(ASN1_R_EXPECTING_A_TIME)     ,"expecting a time"},
-{ERR_REASON(ASN1_R_EXPLICIT_LENGTH_MISMATCH),"explicit length mismatch"},
-{ERR_REASON(ASN1_R_EXPLICIT_TAG_NOT_CONSTRUCTED),"explicit tag not constructed"},
-{ERR_REASON(ASN1_R_FIELD_MISSING)        ,"field missing"},
-{ERR_REASON(ASN1_R_FIRST_NUM_TOO_LARGE)  ,"first num too large"},
-{ERR_REASON(ASN1_R_HEADER_TOO_LONG)      ,"header too long"},
-{ERR_REASON(ASN1_R_ILLEGAL_BITSTRING_FORMAT),"illegal bitstring format"},
-{ERR_REASON(ASN1_R_ILLEGAL_BOOLEAN)      ,"illegal boolean"},
-{ERR_REASON(ASN1_R_ILLEGAL_CHARACTERS)   ,"illegal characters"},
-{ERR_REASON(ASN1_R_ILLEGAL_FORMAT)       ,"illegal format"},
-{ERR_REASON(ASN1_R_ILLEGAL_HEX)          ,"illegal hex"},
-{ERR_REASON(ASN1_R_ILLEGAL_IMPLICIT_TAG) ,"illegal implicit tag"},
-{ERR_REASON(ASN1_R_ILLEGAL_INTEGER)      ,"illegal integer"},
-{ERR_REASON(ASN1_R_ILLEGAL_NESTED_TAGGING),"illegal nested tagging"},
-{ERR_REASON(ASN1_R_ILLEGAL_NULL)         ,"illegal null"},
-{ERR_REASON(ASN1_R_ILLEGAL_NULL_VALUE)   ,"illegal null value"},
-{ERR_REASON(ASN1_R_ILLEGAL_OBJECT)       ,"illegal object"},
-{ERR_REASON(ASN1_R_ILLEGAL_OPTIONAL_ANY) ,"illegal optional any"},
-{ERR_REASON(ASN1_R_ILLEGAL_OPTIONS_ON_ITEM_TEMPLATE),"illegal options on item template"},
-{ERR_REASON(ASN1_R_ILLEGAL_TAGGED_ANY)   ,"illegal tagged any"},
-{ERR_REASON(ASN1_R_ILLEGAL_TIME_VALUE)   ,"illegal time value"},
-{ERR_REASON(ASN1_R_INTEGER_NOT_ASCII_FORMAT),"integer not ascii format"},
-{ERR_REASON(ASN1_R_INTEGER_TOO_LARGE_FOR_LONG),"integer too large for long"},
-{ERR_REASON(ASN1_R_INVALID_BMPSTRING_LENGTH),"invalid bmpstring length"},
-{ERR_REASON(ASN1_R_INVALID_DIGIT)        ,"invalid digit"},
-{ERR_REASON(ASN1_R_INVALID_MODIFIER)     ,"invalid modifier"},
-{ERR_REASON(ASN1_R_INVALID_NUMBER)       ,"invalid number"},
-{ERR_REASON(ASN1_R_INVALID_SEPARATOR)    ,"invalid separator"},
-{ERR_REASON(ASN1_R_INVALID_TIME_FORMAT)  ,"invalid time format"},
-{ERR_REASON(ASN1_R_INVALID_UNIVERSALSTRING_LENGTH),"invalid universalstring length"},
-{ERR_REASON(ASN1_R_INVALID_UTF8STRING)   ,"invalid utf8string"},
-{ERR_REASON(ASN1_R_IV_TOO_LARGE)         ,"iv too large"},
-{ERR_REASON(ASN1_R_LENGTH_ERROR)         ,"length error"},
-{ERR_REASON(ASN1_R_LIST_ERROR)           ,"list error"},
-{ERR_REASON(ASN1_R_MISSING_EOC)          ,"missing eoc"},
-{ERR_REASON(ASN1_R_MISSING_SECOND_NUMBER),"missing second number"},
-{ERR_REASON(ASN1_R_MISSING_VALUE)        ,"missing value"},
-{ERR_REASON(ASN1_R_MSTRING_NOT_UNIVERSAL),"mstring not universal"},
-{ERR_REASON(ASN1_R_MSTRING_WRONG_TAG)    ,"mstring wrong tag"},
-{ERR_REASON(ASN1_R_NESTED_ASN1_STRING)   ,"nested asn1 string"},
-{ERR_REASON(ASN1_R_NON_HEX_CHARACTERS)   ,"non hex characters"},
-{ERR_REASON(ASN1_R_NOT_ASCII_FORMAT)     ,"not ascii format"},
-{ERR_REASON(ASN1_R_NOT_ENOUGH_DATA)      ,"not enough data"},
-{ERR_REASON(ASN1_R_NO_MATCHING_CHOICE_TYPE),"no matching choice type"},
-{ERR_REASON(ASN1_R_NULL_IS_WRONG_LENGTH) ,"null is wrong length"},
-{ERR_REASON(ASN1_R_OBJECT_NOT_ASCII_FORMAT),"object not ascii format"},
-{ERR_REASON(ASN1_R_ODD_NUMBER_OF_CHARS)  ,"odd number of chars"},
-{ERR_REASON(ASN1_R_PRIVATE_KEY_HEADER_MISSING),"private key header missing"},
-{ERR_REASON(ASN1_R_SECOND_NUMBER_TOO_LARGE),"second number too large"},
-{ERR_REASON(ASN1_R_SEQUENCE_LENGTH_MISMATCH),"sequence length mismatch"},
-{ERR_REASON(ASN1_R_SEQUENCE_NOT_CONSTRUCTED),"sequence not constructed"},
-{ERR_REASON(ASN1_R_SEQUENCE_OR_SET_NEEDS_CONFIG),"sequence or set needs config"},
-{ERR_REASON(ASN1_R_SHORT_LINE)           ,"short line"},
-{ERR_REASON(ASN1_R_STRING_TOO_LONG)      ,"string too long"},
-{ERR_REASON(ASN1_R_STRING_TOO_SHORT)     ,"string too short"},
-{ERR_REASON(ASN1_R_TAG_VALUE_TOO_HIGH)   ,"tag value too high"},
-{ERR_REASON(ASN1_R_THE_ASN1_OBJECT_IDENTIFIER_IS_NOT_KNOWN_FOR_THIS_MD),"the asn1 object identifier is not known for this md"},
-{ERR_REASON(ASN1_R_TIME_NOT_ASCII_FORMAT),"time not ascii format"},
-{ERR_REASON(ASN1_R_TOO_LONG)             ,"too long"},
-{ERR_REASON(ASN1_R_TYPE_NOT_CONSTRUCTED) ,"type not constructed"},
-{ERR_REASON(ASN1_R_UNABLE_TO_DECODE_RSA_KEY),"unable to decode rsa key"},
-{ERR_REASON(ASN1_R_UNABLE_TO_DECODE_RSA_PRIVATE_KEY),"unable to decode rsa private key"},
-{ERR_REASON(ASN1_R_UNEXPECTED_EOC)       ,"unexpected eoc"},
-{ERR_REASON(ASN1_R_UNKNOWN_FORMAT)       ,"unknown format"},
-{ERR_REASON(ASN1_R_UNKNOWN_MESSAGE_DIGEST_ALGORITHM),"unknown message digest algorithm"},
-{ERR_REASON(ASN1_R_UNKNOWN_OBJECT_TYPE)  ,"unknown object type"},
-{ERR_REASON(ASN1_R_UNKNOWN_PUBLIC_KEY_TYPE),"unknown public key type"},
-{ERR_REASON(ASN1_R_UNKNOWN_TAG)          ,"unknown tag"},
-{ERR_REASON(ASN1_R_UNKOWN_FORMAT)        ,"unkown format"},
-{ERR_REASON(ASN1_R_UNSUPPORTED_ANY_DEFINED_BY_TYPE),"unsupported any defined by type"},
-{ERR_REASON(ASN1_R_UNSUPPORTED_CIPHER)   ,"unsupported cipher"},
-{ERR_REASON(ASN1_R_UNSUPPORTED_ENCRYPTION_ALGORITHM),"unsupported encryption algorithm"},
-{ERR_REASON(ASN1_R_UNSUPPORTED_PUBLIC_KEY_TYPE),"unsupported public key type"},
-{ERR_REASON(ASN1_R_UNSUPPORTED_TYPE)     ,"unsupported type"},
-{ERR_REASON(ASN1_R_WRONG_TAG)            ,"wrong tag"},
-{ERR_REASON(ASN1_R_WRONG_TYPE)           ,"wrong type"},
-{0,NULL}
-	};
-
-#endif
-
-void ERR_load_ASN1_strings(void)
-	{
-#ifndef OPENSSL_NO_ERR
-
-	if (ERR_func_error_string(ASN1_str_functs[0].error) == NULL)
-		{
-		ERR_load_strings(0,ASN1_str_functs);
-		ERR_load_strings(0,ASN1_str_reasons);
-		}
-#endif
-	}
diff --git a/crypto/openssl/crypto/asn1/asn1_gen.c b/crypto/openssl/crypto/asn1/asn1_gen.c
deleted file mode 100644
index 26c832781e40..000000000000
--- a/crypto/openssl/crypto/asn1/asn1_gen.c
+++ /dev/null
@@ -1,848 +0,0 @@
-/* asn1_gen.c */
-/* Written by Dr Stephen N Henson (shenson@bigfoot.com) for the OpenSSL
- * project 2002.
- */
-/* ====================================================================
- * Copyright (c) 2002 The OpenSSL Project.  All rights reserved.
- *
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions
- * are met:
- *
- * 1. Redistributions of source code must retain the above copyright
- *    notice, this list of conditions and the following disclaimer. 
- *
- * 2. Redistributions in binary form must reproduce the above copyright
- *    notice, this list of conditions and the following disclaimer in
- *    the documentation and/or other materials provided with the
- *    distribution.
- *
- * 3. All advertising materials mentioning features or use of this
- *    software must display the following acknowledgment:
- *    "This product includes software developed by the OpenSSL Project
- *    for use in the OpenSSL Toolkit. (http://www.OpenSSL.org/)"
- *
- * 4. The names "OpenSSL Toolkit" and "OpenSSL Project" must not be used to
- *    endorse or promote products derived from this software without
- *    prior written permission. For written permission, please contact
- *    licensing@OpenSSL.org.
- *
- * 5. Products derived from this software may not be called "OpenSSL"
- *    nor may "OpenSSL" appear in their names without prior written
- *    permission of the OpenSSL Project.
- *
- * 6. Redistributions of any form whatsoever must retain the following
- *    acknowledgment:
- *    "This product includes software developed by the OpenSSL Project
- *    for use in the OpenSSL Toolkit (http://www.OpenSSL.org/)"
- *
- * THIS SOFTWARE IS PROVIDED BY THE OpenSSL PROJECT ``AS IS'' AND ANY
- * EXPRESSED OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
- * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR
- * PURPOSE ARE DISCLAIMED.  IN NO EVENT SHALL THE OpenSSL PROJECT OR
- * ITS CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
- * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
- * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
- * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
- * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
- * STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
- * ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED
- * OF THE POSSIBILITY OF SUCH DAMAGE.
- * ====================================================================
- *
- * This product includes cryptographic software written by Eric Young
- * (eay@cryptsoft.com).  This product includes software written by Tim
- * Hudson (tjh@cryptsoft.com).
- *
- */
-
-#include "cryptlib.h"
-#include <openssl/asn1.h>
-#include <openssl/x509v3.h>
-
-#define ASN1_GEN_FLAG		0x10000
-#define ASN1_GEN_FLAG_IMP	(ASN1_GEN_FLAG|1)
-#define ASN1_GEN_FLAG_EXP	(ASN1_GEN_FLAG|2)
-#define ASN1_GEN_FLAG_TAG	(ASN1_GEN_FLAG|3)
-#define ASN1_GEN_FLAG_BITWRAP	(ASN1_GEN_FLAG|4)
-#define ASN1_GEN_FLAG_OCTWRAP	(ASN1_GEN_FLAG|5)
-#define ASN1_GEN_FLAG_SEQWRAP	(ASN1_GEN_FLAG|6)
-#define ASN1_GEN_FLAG_SETWRAP	(ASN1_GEN_FLAG|7)
-#define ASN1_GEN_FLAG_FORMAT	(ASN1_GEN_FLAG|8)
-
-#define ASN1_GEN_STR(str,val)	{str, sizeof(str) - 1, val}
-
-#define ASN1_FLAG_EXP_MAX	20
-
-/* Input formats */
-
-/* ASCII: default */
-#define ASN1_GEN_FORMAT_ASCII	1
-/* UTF8 */
-#define ASN1_GEN_FORMAT_UTF8	2
-/* Hex */
-#define ASN1_GEN_FORMAT_HEX	3
-/* List of bits */
-#define ASN1_GEN_FORMAT_BITLIST	4
-
-
-struct tag_name_st
-	{
-	const char *strnam;
-	int len;
-	int tag;
-	};
-
-typedef struct
-	{
-	int exp_tag;
-	int exp_class;
-	int exp_constructed;
-	int exp_pad;
-	long exp_len;
-	} tag_exp_type;
-
-typedef struct
-	{
-	int imp_tag;
-	int imp_class;
-	int utype;
-	int format;
-	const char *str;
-	tag_exp_type exp_list[ASN1_FLAG_EXP_MAX];
-	int exp_count;
-	} tag_exp_arg;
-
-static int bitstr_cb(const char *elem, int len, void *bitstr);
-static int asn1_cb(const char *elem, int len, void *bitstr);
-static int append_exp(tag_exp_arg *arg, int exp_tag, int exp_class, int exp_constructed, int exp_pad, int imp_ok);
-static int parse_tagging(const char *vstart, int vlen, int *ptag, int *pclass);
-static ASN1_TYPE *asn1_multi(int utype, const char *section, X509V3_CTX *cnf);
-static ASN1_TYPE *asn1_str2type(const char *str, int format, int utype);
-static int asn1_str2tag(const char *tagstr, int len);
-
-ASN1_TYPE *ASN1_generate_nconf(char *str, CONF *nconf)
-	{
-	X509V3_CTX cnf;
-
-	if (!nconf)
-		return ASN1_generate_v3(str, NULL);
-
-	X509V3_set_nconf(&cnf, nconf);
-	return ASN1_generate_v3(str, &cnf);
-	}
-
-ASN1_TYPE *ASN1_generate_v3(char *str, X509V3_CTX *cnf)
-	{
-	ASN1_TYPE *ret;
-	tag_exp_arg asn1_tags;
-	tag_exp_type *etmp;
-
-	int i, len;
-
-	unsigned char *orig_der = NULL, *new_der = NULL;
-	const unsigned char *cpy_start;
-	unsigned char *p;
-	const unsigned char *cp;
-	int cpy_len;
-	long hdr_len;
-	int hdr_constructed = 0, hdr_tag, hdr_class;
-	int r;
-
-	asn1_tags.imp_tag = -1;
-	asn1_tags.imp_class = -1;
-	asn1_tags.format = ASN1_GEN_FORMAT_ASCII;
-	asn1_tags.exp_count = 0;
-	if (CONF_parse_list(str, ',', 1, asn1_cb, &asn1_tags) != 0)
-		return NULL;
-
-	if ((asn1_tags.utype == V_ASN1_SEQUENCE) || (asn1_tags.utype == V_ASN1_SET))
-		{
-		if (!cnf)
-			{
-			ASN1err(ASN1_F_ASN1_GENERATE_V3, ASN1_R_SEQUENCE_OR_SET_NEEDS_CONFIG);
-			return NULL;
-			}
-		ret = asn1_multi(asn1_tags.utype, asn1_tags.str, cnf);
-		}
-	else
-		ret = asn1_str2type(asn1_tags.str, asn1_tags.format, asn1_tags.utype);
-
-	if (!ret)
-		return NULL;
-
-	/* If no tagging return base type */
-	if ((asn1_tags.imp_tag == -1) && (asn1_tags.exp_count == 0))
-		return ret;
-
-	/* Generate the encoding */
-	cpy_len = i2d_ASN1_TYPE(ret, &orig_der);
-	ASN1_TYPE_free(ret);
-	ret = NULL;
-	/* Set point to start copying for modified encoding */
-	cpy_start = orig_der;
-
-	/* Do we need IMPLICIT tagging? */
-	if (asn1_tags.imp_tag != -1)
-		{
-		/* If IMPLICIT we will replace the underlying tag */
-		/* Skip existing tag+len */
-		r = ASN1_get_object(&cpy_start, &hdr_len, &hdr_tag, &hdr_class, cpy_len);
-		if (r & 0x80)
-			goto err;
-		/* Update copy length */
-		cpy_len -= cpy_start - orig_der;
-		/* For IMPLICIT tagging the length should match the
-		 * original length and constructed flag should be
-		 * consistent.
-		 */
-		if (r & 0x1)
-			{
-			/* Indefinite length constructed */
-			hdr_constructed = 2;
-			hdr_len = 0;
-			}
-		else
-			/* Just retain constructed flag */
-			hdr_constructed = r & V_ASN1_CONSTRUCTED;
-		/* Work out new length with IMPLICIT tag: ignore constructed
-		 * because it will mess up if indefinite length
-		 */
-		len = ASN1_object_size(0, hdr_len, asn1_tags.imp_tag);
-		}
-	else
-		len = cpy_len;
-
-	/* Work out length in any EXPLICIT, starting from end */
-
-	for(i = 0, etmp = asn1_tags.exp_list + asn1_tags.exp_count - 1; i < asn1_tags.exp_count; i++, etmp--)
-		{
-		/* Content length: number of content octets + any padding */
-		len += etmp->exp_pad;
-		etmp->exp_len = len;
-		/* Total object length: length including new header */
-		len = ASN1_object_size(0, len, etmp->exp_tag);
-		}
-
-	/* Allocate buffer for new encoding */
-
-	new_der = OPENSSL_malloc(len);
-
-	/* Generate tagged encoding */
-
-	p = new_der;
-
-	/* Output explicit tags first */
-
-	for (i = 0, etmp = asn1_tags.exp_list; i < asn1_tags.exp_count; i++, etmp++)
-		{
-		ASN1_put_object(&p, etmp->exp_constructed, etmp->exp_len,
-					etmp->exp_tag, etmp->exp_class);
-		if (etmp->exp_pad)
-			*p++ = 0;
-		}
-
-	/* If IMPLICIT, output tag */
-
-	if (asn1_tags.imp_tag != -1)
-		ASN1_put_object(&p, hdr_constructed, hdr_len,
-					asn1_tags.imp_tag, asn1_tags.imp_class);
-
-	/* Copy across original encoding */
-	memcpy(p, cpy_start, cpy_len);
-
-	cp = new_der;
-
-	/* Obtain new ASN1_TYPE structure */
-	ret = d2i_ASN1_TYPE(NULL, &cp, len);
-
-	err:
-	if (orig_der)
-		OPENSSL_free(orig_der);
-	if (new_der)
-		OPENSSL_free(new_der);
-
-	return ret;
-
-	}
-
-static int asn1_cb(const char *elem, int len, void *bitstr)
-	{
-	tag_exp_arg *arg = bitstr;
-	int i;
-	int utype;
-	int vlen = 0;
-	const char *p, *vstart = NULL;
-
-	int tmp_tag, tmp_class;
-
-	for(i = 0, p = elem; i < len; p++, i++)
-		{
-		/* Look for the ':' in name value pairs */
-		if (*p == ':')
-			{
-			vstart = p + 1;
-			vlen = len - (vstart - elem);
-			len = p - elem;
-			break;
-			}
-		}
-
-	utype = asn1_str2tag(elem, len);
-
-	if (utype == -1)
-		{
-		ASN1err(ASN1_F_ASN1_CB, ASN1_R_UNKNOWN_TAG);
-		ERR_add_error_data(2, "tag=", elem);
-		return -1;
-		}
-
-	/* If this is not a modifier mark end of string and exit */
-	if (!(utype & ASN1_GEN_FLAG))
-		{
-		arg->utype = utype;
-		arg->str = vstart;
-		/* If no value and not end of string, error */
-		if (!vstart && elem[len])
-			{
-			ASN1err(ASN1_F_ASN1_CB, ASN1_R_MISSING_VALUE);
-			return -1;
-			}
-		return 0;
-		}
-
-	switch(utype)
-		{
-
-		case ASN1_GEN_FLAG_IMP:
-		/* Check for illegal multiple IMPLICIT tagging */
-		if (arg->imp_tag != -1)
-			{
-			ASN1err(ASN1_F_ASN1_CB, ASN1_R_ILLEGAL_NESTED_TAGGING);
-			return -1;
-			}
-		if (!parse_tagging(vstart, vlen, &arg->imp_tag, &arg->imp_class))
-			return -1;
-		break;
-
-		case ASN1_GEN_FLAG_EXP:
-
-		if (!parse_tagging(vstart, vlen, &tmp_tag, &tmp_class))
-			return -1;
-		if (!append_exp(arg, tmp_tag, tmp_class, 1, 0, 0))
-			return -1;
-		break;
-
-		case ASN1_GEN_FLAG_SEQWRAP:
-		if (!append_exp(arg, V_ASN1_SEQUENCE, V_ASN1_UNIVERSAL, 1, 0, 1))
-			return -1;
-		break;
-
-		case ASN1_GEN_FLAG_SETWRAP:
-		if (!append_exp(arg, V_ASN1_SET, V_ASN1_UNIVERSAL, 1, 0, 1))
-			return -1;
-		break;
-
-		case ASN1_GEN_FLAG_BITWRAP:
-		if (!append_exp(arg, V_ASN1_BIT_STRING, V_ASN1_UNIVERSAL, 0, 1, 1))
-			return -1;
-		break;
-
-		case ASN1_GEN_FLAG_OCTWRAP:
-		if (!append_exp(arg, V_ASN1_OCTET_STRING, V_ASN1_UNIVERSAL, 0, 0, 1))
-			return -1;
-		break;
-
-		case ASN1_GEN_FLAG_FORMAT:
-		if (!strncmp(vstart, "ASCII", 5))
-			arg->format = ASN1_GEN_FORMAT_ASCII;
-		else if (!strncmp(vstart, "UTF8", 4))
-			arg->format = ASN1_GEN_FORMAT_UTF8;
-		else if (!strncmp(vstart, "HEX", 3))
-			arg->format = ASN1_GEN_FORMAT_HEX;
-		else if (!strncmp(vstart, "BITLIST", 3))
-			arg->format = ASN1_GEN_FORMAT_BITLIST;
-		else
-			{
-			ASN1err(ASN1_F_ASN1_CB, ASN1_R_UNKOWN_FORMAT);
-			return -1;
-			}
-		break;
-
-		}
-
-	return 1;
-
-	}
-
-static int parse_tagging(const char *vstart, int vlen, int *ptag, int *pclass)
-	{
-	char erch[2];
-	long tag_num;
-	char *eptr;
-	if (!vstart)
-		return 0;
-	tag_num = strtoul(vstart, &eptr, 10);
-	/* Check we haven't gone past max length: should be impossible */
-	if (eptr && *eptr && (eptr > vstart + vlen))
-		return 0;
-	if (tag_num < 0)
-		{
-		ASN1err(ASN1_F_PARSE_TAGGING, ASN1_R_INVALID_NUMBER);
-		return 0;
-		}
-	*ptag = tag_num;
-	/* If we have non numeric characters, parse them */
-	if (eptr)
-		vlen -= eptr - vstart;
-	else 
-		vlen = 0;
-	if (vlen)
-		{
-		switch (*eptr)
-			{
-
-			case 'U':
-			*pclass = V_ASN1_UNIVERSAL;
-			break;
-
-			case 'A':
-			*pclass = V_ASN1_APPLICATION;
-			break;
-
-			case 'P':
-			*pclass = V_ASN1_PRIVATE;
-			break;
-
-			case 'C':
-			*pclass = V_ASN1_CONTEXT_SPECIFIC;
-			break;
-
-			default:
-			erch[0] = *eptr;
-			erch[1] = 0;
-			ASN1err(ASN1_F_PARSE_TAGGING, ASN1_R_INVALID_MODIFIER);
-			ERR_add_error_data(2, "Char=", erch);
-			return 0;
-			break;
-
-			}
-		}
-	else
-		*pclass = V_ASN1_CONTEXT_SPECIFIC;
-
-	return 1;
-
-	}
-
-/* Handle multiple types: SET and SEQUENCE */
-
-static ASN1_TYPE *asn1_multi(int utype, const char *section, X509V3_CTX *cnf)
-	{
-	ASN1_TYPE *ret = NULL, *typ = NULL;
-	STACK_OF(ASN1_TYPE) *sk = NULL;
-	STACK_OF(CONF_VALUE) *sect = NULL;
-	unsigned char *der = NULL, *p;
-	int derlen;
-	int i, is_set;
-	sk = sk_ASN1_TYPE_new_null();
-	if (section)
-		{
-		if (!cnf)
-			goto bad;
-		sect = X509V3_get_section(cnf, (char *)section);
-		if (!sect)
-			goto bad;
-		for (i = 0; i < sk_CONF_VALUE_num(sect); i++)
-			{
-			typ = ASN1_generate_v3(sk_CONF_VALUE_value(sect, i)->value, cnf);
-			if (!typ)
-				goto bad;
-			sk_ASN1_TYPE_push(sk, typ);
-			typ = NULL;
-			}
-		}
-
-	/* Now we has a STACK of the components, convert to the correct form */
-
-	if (utype == V_ASN1_SET)
-		is_set = 1;
-	else
-		is_set = 0;
-
-
-	derlen = i2d_ASN1_SET_OF_ASN1_TYPE(sk, NULL, i2d_ASN1_TYPE, utype,
-					   V_ASN1_UNIVERSAL, is_set);
-	der = OPENSSL_malloc(derlen);
-	p = der;
-	i2d_ASN1_SET_OF_ASN1_TYPE(sk, &p, i2d_ASN1_TYPE, utype,
-				  V_ASN1_UNIVERSAL, is_set);
-
-	if (!(ret = ASN1_TYPE_new()))
-		goto bad;
-
-	if (!(ret->value.asn1_string = ASN1_STRING_type_new(utype)))
-		goto bad;
-
-	ret->type = utype;
-
-	ret->value.asn1_string->data = der;
-	ret->value.asn1_string->length = derlen;
-
-	der = NULL;
-
-	bad:
-
-	if (der)
-		OPENSSL_free(der);
-
-	if (sk)
-		sk_ASN1_TYPE_pop_free(sk, ASN1_TYPE_free);
-	if (typ)
-		ASN1_TYPE_free(typ);
-	if (sect)
-		X509V3_section_free(cnf, sect);
-
-	return ret;
-	}
-
-static int append_exp(tag_exp_arg *arg, int exp_tag, int exp_class, int exp_constructed, int exp_pad, int imp_ok)
-	{
-	tag_exp_type *exp_tmp;
-	/* Can only have IMPLICIT if permitted */
-	if ((arg->imp_tag != -1) && !imp_ok)
-		{
-		ASN1err(ASN1_F_APPEND_EXP, ASN1_R_ILLEGAL_IMPLICIT_TAG);
-		return 0;
-		}
-
-	if (arg->exp_count == ASN1_FLAG_EXP_MAX)
-		{
-		ASN1err(ASN1_F_APPEND_EXP, ASN1_R_DEPTH_EXCEEDED);
-		return 0;
-		}
-
-	exp_tmp = &arg->exp_list[arg->exp_count++];
-
-	/* If IMPLICIT set tag to implicit value then
-	 * reset implicit tag since it has been used.
-	 */
-	if (arg->imp_tag != -1)
-		{
-		exp_tmp->exp_tag = arg->imp_tag;
-		exp_tmp->exp_class = arg->imp_class;
-		arg->imp_tag = -1;
-		arg->imp_class = -1;
-		}
-	else
-		{
-		exp_tmp->exp_tag = exp_tag;
-		exp_tmp->exp_class = exp_class;
-		}
-	exp_tmp->exp_constructed = exp_constructed;
-	exp_tmp->exp_pad = exp_pad;
-
-	return 1;
-	}
-
-
-static int asn1_str2tag(const char *tagstr, int len)
-	{
-	unsigned int i;
-	static struct tag_name_st *tntmp, tnst [] = {
-		ASN1_GEN_STR("BOOL", V_ASN1_BOOLEAN),
-		ASN1_GEN_STR("BOOLEAN", V_ASN1_BOOLEAN),
-		ASN1_GEN_STR("NULL", V_ASN1_NULL),
-		ASN1_GEN_STR("INT", V_ASN1_INTEGER),
-		ASN1_GEN_STR("INTEGER", V_ASN1_INTEGER),
-		ASN1_GEN_STR("ENUM", V_ASN1_ENUMERATED),
-		ASN1_GEN_STR("ENUMERATED", V_ASN1_ENUMERATED),
-		ASN1_GEN_STR("OID", V_ASN1_OBJECT),
-		ASN1_GEN_STR("OBJECT", V_ASN1_OBJECT),
-		ASN1_GEN_STR("UTCTIME", V_ASN1_UTCTIME),
-		ASN1_GEN_STR("UTC", V_ASN1_UTCTIME),
-		ASN1_GEN_STR("GENERALIZEDTIME", V_ASN1_GENERALIZEDTIME),
-		ASN1_GEN_STR("GENTIME", V_ASN1_GENERALIZEDTIME),
-		ASN1_GEN_STR("OCT", V_ASN1_OCTET_STRING),
-		ASN1_GEN_STR("OCTETSTRING", V_ASN1_OCTET_STRING),
-		ASN1_GEN_STR("BITSTR", V_ASN1_BIT_STRING),
-		ASN1_GEN_STR("BITSTRING", V_ASN1_BIT_STRING),
-		ASN1_GEN_STR("UNIVERSALSTRING", V_ASN1_UNIVERSALSTRING),
-		ASN1_GEN_STR("UNIV", V_ASN1_UNIVERSALSTRING),
-		ASN1_GEN_STR("IA5", V_ASN1_IA5STRING),
-		ASN1_GEN_STR("IA5STRING", V_ASN1_IA5STRING),
-		ASN1_GEN_STR("UTF8", V_ASN1_UTF8STRING),
-		ASN1_GEN_STR("UTF8String", V_ASN1_UTF8STRING),
-		ASN1_GEN_STR("BMP", V_ASN1_BMPSTRING),
-		ASN1_GEN_STR("BMPSTRING", V_ASN1_BMPSTRING),
-		ASN1_GEN_STR("VISIBLESTRING", V_ASN1_VISIBLESTRING),
-		ASN1_GEN_STR("VISIBLE", V_ASN1_VISIBLESTRING),
-		ASN1_GEN_STR("PRINTABLESTRING", V_ASN1_PRINTABLESTRING),
-		ASN1_GEN_STR("PRINTABLE", V_ASN1_PRINTABLESTRING),
-		ASN1_GEN_STR("T61", V_ASN1_T61STRING),
-		ASN1_GEN_STR("T61STRING", V_ASN1_T61STRING),
-		ASN1_GEN_STR("TELETEXSTRING", V_ASN1_T61STRING),
-		ASN1_GEN_STR("GeneralString", V_ASN1_GENERALSTRING),
-		ASN1_GEN_STR("GENSTR", V_ASN1_GENERALSTRING),
-
-		/* Special cases */
-		ASN1_GEN_STR("SEQUENCE", V_ASN1_SEQUENCE),
-		ASN1_GEN_STR("SEQ", V_ASN1_SEQUENCE),
-		ASN1_GEN_STR("SET", V_ASN1_SET),
-		/* type modifiers */
-		/* Explicit tag */
-		ASN1_GEN_STR("EXP", ASN1_GEN_FLAG_EXP),
-		ASN1_GEN_STR("EXPLICIT", ASN1_GEN_FLAG_EXP),
-		/* Implicit tag */
-		ASN1_GEN_STR("IMP", ASN1_GEN_FLAG_IMP),
-		ASN1_GEN_STR("IMPLICIT", ASN1_GEN_FLAG_IMP),
-		/* OCTET STRING wrapper */
-		ASN1_GEN_STR("OCTWRAP", ASN1_GEN_FLAG_OCTWRAP),
-		/* SEQUENCE wrapper */
-		ASN1_GEN_STR("SEQWRAP", ASN1_GEN_FLAG_SEQWRAP),
-		/* SET wrapper */
-		ASN1_GEN_STR("SETWRAP", ASN1_GEN_FLAG_SETWRAP),
-		/* BIT STRING wrapper */
-		ASN1_GEN_STR("BITWRAP", ASN1_GEN_FLAG_BITWRAP),
-		ASN1_GEN_STR("FORM", ASN1_GEN_FLAG_FORMAT),
-		ASN1_GEN_STR("FORMAT", ASN1_GEN_FLAG_FORMAT),
-	};
-
-	if (len == -1)
-		len = strlen(tagstr);
-	
-	tntmp = tnst;	
-	for (i = 0; i < sizeof(tnst) / sizeof(struct tag_name_st); i++, tntmp++)
-		{
-		if ((len == tntmp->len) && !strncmp(tntmp->strnam, tagstr, len))
-			return tntmp->tag;
-		}
-	
-	return -1;
-	}
-
-static ASN1_TYPE *asn1_str2type(const char *str, int format, int utype)
-	{
-	ASN1_TYPE *atmp = NULL;
-
-	CONF_VALUE vtmp;
-
-	unsigned char *rdata;
-	long rdlen;
-
-	int no_unused = 1;
-
-	if (!(atmp = ASN1_TYPE_new()))
-		{
-		ASN1err(ASN1_F_ASN1_STR2TYPE, ERR_R_MALLOC_FAILURE);
-		return NULL;
-		}
-
-	if (!str)
-		str = "";
-
-	switch(utype)
-		{
-
-		case V_ASN1_NULL:
-		if (str && *str)
-			{
-			ASN1err(ASN1_F_ASN1_STR2TYPE, ASN1_R_ILLEGAL_NULL_VALUE);
-			goto bad_form;
-			}
-		break;
-		
-		case V_ASN1_BOOLEAN:
-		if (format != ASN1_GEN_FORMAT_ASCII)
-			{
-			ASN1err(ASN1_F_ASN1_STR2TYPE, ASN1_R_NOT_ASCII_FORMAT);
-			goto bad_form;
-			}
-		vtmp.name = NULL;
-		vtmp.section = NULL;
-		vtmp.value = (char *)str;
-		if (!X509V3_get_value_bool(&vtmp, &atmp->value.boolean))
-			{
-			ASN1err(ASN1_F_ASN1_STR2TYPE, ASN1_R_ILLEGAL_BOOLEAN);
-			goto bad_str;
-			}
-		break;
-
-		case V_ASN1_INTEGER:
-		case V_ASN1_ENUMERATED:
-		if (format != ASN1_GEN_FORMAT_ASCII)
-			{
-			ASN1err(ASN1_F_ASN1_STR2TYPE, ASN1_R_INTEGER_NOT_ASCII_FORMAT);
-			goto bad_form;
-			}
-		if (!(atmp->value.integer = s2i_ASN1_INTEGER(NULL, (char *)str)))
-			{
-			ASN1err(ASN1_F_ASN1_STR2TYPE, ASN1_R_ILLEGAL_INTEGER);
-			goto bad_str;
-			}
-		break;
-
-		case V_ASN1_OBJECT:
-		if (format != ASN1_GEN_FORMAT_ASCII)
-			{
-			ASN1err(ASN1_F_ASN1_STR2TYPE, ASN1_R_OBJECT_NOT_ASCII_FORMAT);
-			goto bad_form;
-			}
-		if (!(atmp->value.object = OBJ_txt2obj(str, 0)))
-			{
-			ASN1err(ASN1_F_ASN1_STR2TYPE, ASN1_R_ILLEGAL_OBJECT);
-			goto bad_str;
-			}
-		break;
-
-		case V_ASN1_UTCTIME:
-		case V_ASN1_GENERALIZEDTIME:
-		if (format != ASN1_GEN_FORMAT_ASCII)
-			{
-			ASN1err(ASN1_F_ASN1_STR2TYPE, ASN1_R_TIME_NOT_ASCII_FORMAT);
-			goto bad_form;
-			}
-		if (!(atmp->value.asn1_string = ASN1_STRING_new()))
-			{
-			ASN1err(ASN1_F_ASN1_STR2TYPE, ERR_R_MALLOC_FAILURE);
-			goto bad_str;
-			}
-		if (!ASN1_STRING_set(atmp->value.asn1_string, str, -1))
-			{
-			ASN1err(ASN1_F_ASN1_STR2TYPE, ERR_R_MALLOC_FAILURE);
-			goto bad_str;
-			}
-		atmp->value.asn1_string->type = utype;
-		if (!ASN1_TIME_check(atmp->value.asn1_string))
-			{
-			ASN1err(ASN1_F_ASN1_STR2TYPE, ASN1_R_ILLEGAL_TIME_VALUE);
-			goto bad_str;
-			}
-
-		break;
-
-		case V_ASN1_BMPSTRING:
-		case V_ASN1_PRINTABLESTRING:
-		case V_ASN1_IA5STRING:
-		case V_ASN1_T61STRING:
-		case V_ASN1_UTF8STRING:
-		case V_ASN1_VISIBLESTRING:
-		case V_ASN1_UNIVERSALSTRING:
-		case V_ASN1_GENERALSTRING:
-
-		if (format == ASN1_GEN_FORMAT_ASCII)
-			format = MBSTRING_ASC;
-		else if (format == ASN1_GEN_FORMAT_UTF8)
-			format = MBSTRING_UTF8;
-		else
-			{
-			ASN1err(ASN1_F_ASN1_STR2TYPE, ASN1_R_ILLEGAL_FORMAT);
-			goto bad_form;
-			}
-
-
-		if (ASN1_mbstring_copy(&atmp->value.asn1_string, (unsigned char *)str,
-						-1, format, ASN1_tag2bit(utype)) <= 0)
-			{
-			ASN1err(ASN1_F_ASN1_STR2TYPE, ERR_R_MALLOC_FAILURE);
-			goto bad_str;
-			}
-		
-
-		break;
-
-		case V_ASN1_BIT_STRING:
-
-		case V_ASN1_OCTET_STRING:
-
-		if (!(atmp->value.asn1_string = ASN1_STRING_new()))
-			{
-			ASN1err(ASN1_F_ASN1_STR2TYPE, ERR_R_MALLOC_FAILURE);
-			goto bad_form;
-			}
-
-		if (format == ASN1_GEN_FORMAT_HEX)
-			{
-
-			if (!(rdata = string_to_hex((char *)str, &rdlen)))
-				{
-				ASN1err(ASN1_F_ASN1_STR2TYPE, ASN1_R_ILLEGAL_HEX);
-				goto bad_str;
-				}
-
-			atmp->value.asn1_string->data = rdata;
-			atmp->value.asn1_string->length = rdlen;
-			atmp->value.asn1_string->type = utype;
-
-			}
-		else if (format == ASN1_GEN_FORMAT_ASCII)
-			ASN1_STRING_set(atmp->value.asn1_string, str, -1);
-		else if ((format == ASN1_GEN_FORMAT_BITLIST) && (utype == V_ASN1_BIT_STRING))
-			{
-			if (!CONF_parse_list(str, ',', 1, bitstr_cb, atmp->value.bit_string))
-				{
-				ASN1err(ASN1_F_ASN1_STR2TYPE, ASN1_R_LIST_ERROR);
-				goto bad_str;
-				}
-			no_unused = 0;
-			
-			}
-		else 
-			{
-			ASN1err(ASN1_F_ASN1_STR2TYPE, ASN1_R_ILLEGAL_BITSTRING_FORMAT);
-			goto bad_form;
-			}
-
-		if ((utype == V_ASN1_BIT_STRING) && no_unused)
-			{
-			atmp->value.asn1_string->flags
-				&= ~(ASN1_STRING_FLAG_BITS_LEFT|0x07);
-        		atmp->value.asn1_string->flags
-				|= ASN1_STRING_FLAG_BITS_LEFT;
-			}
-
-
-		break;
-
-		default:
-		ASN1err(ASN1_F_ASN1_STR2TYPE, ASN1_R_UNSUPPORTED_TYPE);
-		goto bad_str;
-		break;
-		}
-
-
-	atmp->type = utype;
-	return atmp;
-
-
-	bad_str:
-	ERR_add_error_data(2, "string=", str);
-	bad_form:
-
-	ASN1_TYPE_free(atmp);
-	return NULL;
-
-	}
-
-static int bitstr_cb(const char *elem, int len, void *bitstr)
-	{
-	long bitnum;
-	char *eptr;
-	if (!elem)
-		return 0;
-	bitnum = strtoul(elem, &eptr, 10);
-	if (eptr && *eptr && (eptr != elem + len))
-		return 0;
-	if (bitnum < 0)
-		{
-		ASN1err(ASN1_F_BITSTR_CB, ASN1_R_INVALID_NUMBER);
-		return 0;
-		}
-	if (!ASN1_BIT_STRING_set_bit(bitstr, bitnum, 1))
-		{
-		ASN1err(ASN1_F_BITSTR_CB, ERR_R_MALLOC_FAILURE);
-		return 0;
-		}
-	return 1;
-	}
-
diff --git a/crypto/openssl/crypto/asn1/asn1_lib.c b/crypto/openssl/crypto/asn1/asn1_lib.c
deleted file mode 100644
index d5ae5b2258a4..000000000000
--- a/crypto/openssl/crypto/asn1/asn1_lib.c
+++ /dev/null
@@ -1,462 +0,0 @@
-/* crypto/asn1/asn1_lib.c */
-/* Copyright (C) 1995-1998 Eric Young (eay@cryptsoft.com)
- * All rights reserved.
- *
- * This package is an SSL implementation written
- * by Eric Young (eay@cryptsoft.com).
- * The implementation was written so as to conform with Netscapes SSL.
- * 
- * This library is free for commercial and non-commercial use as long as
- * the following conditions are aheared to.  The following conditions
- * apply to all code found in this distribution, be it the RC4, RSA,
- * lhash, DES, etc., code; not just the SSL code.  The SSL documentation
- * included with this distribution is covered by the same copyright terms
- * except that the holder is Tim Hudson (tjh@cryptsoft.com).
- * 
- * Copyright remains Eric Young's, and as such any Copyright notices in
- * the code are not to be removed.
- * If this package is used in a product, Eric Young should be given attribution
- * as the author of the parts of the library used.
- * This can be in the form of a textual message at program startup or
- * in documentation (online or textual) provided with the package.
- * 
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions
- * are met:
- * 1. Redistributions of source code must retain the copyright
- *    notice, this list of conditions and the following disclaimer.
- * 2. Redistributions in binary form must reproduce the above copyright
- *    notice, this list of conditions and the following disclaimer in the
- *    documentation and/or other materials provided with the distribution.
- * 3. All advertising materials mentioning features or use of this software
- *    must display the following acknowledgement:
- *    "This product includes cryptographic software written by
- *     Eric Young (eay@cryptsoft.com)"
- *    The word 'cryptographic' can be left out if the rouines from the library
- *    being used are not cryptographic related :-).
- * 4. If you include any Windows specific code (or a derivative thereof) from 
- *    the apps directory (application code) you must include an acknowledgement:
- *    "This product includes software written by Tim Hudson (tjh@cryptsoft.com)"
- * 
- * THIS SOFTWARE IS PROVIDED BY ERIC YOUNG ``AS IS'' AND
- * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
- * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
- * ARE DISCLAIMED.  IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE
- * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
- * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
- * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
- * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
- * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
- * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
- * SUCH DAMAGE.
- * 
- * The licence and distribution terms for any publically available version or
- * derivative of this code cannot be changed.  i.e. this code cannot simply be
- * copied and put under another distribution licence
- * [including the GNU Public Licence.]
- */
-
-#include <stdio.h>
-#include <limits.h>
-#include "cryptlib.h"
-#include <openssl/asn1.h>
-#include <openssl/asn1_mac.h>
-
-static int asn1_get_length(const unsigned char **pp,int *inf,long *rl,int max);
-static void asn1_put_length(unsigned char **pp, int length);
-const char ASN1_version[]="ASN.1" OPENSSL_VERSION_PTEXT;
-
-static int _asn1_check_infinite_end(const unsigned char **p, long len)
-	{
-	/* If there is 0 or 1 byte left, the length check should pick
-	 * things up */
-	if (len <= 0)
-		return(1);
-	else if ((len >= 2) && ((*p)[0] == 0) && ((*p)[1] == 0))
-		{
-		(*p)+=2;
-		return(1);
-		}
-	return(0);
-	}
-
-int ASN1_check_infinite_end(unsigned char **p, long len)
-	{
-	return _asn1_check_infinite_end((const unsigned char **)p, len);
-	}
-
-int ASN1_const_check_infinite_end(const unsigned char **p, long len)
-	{
-	return _asn1_check_infinite_end(p, len);
-	}
-
-
-int ASN1_get_object(const unsigned char **pp, long *plength, int *ptag,
-	int *pclass, long omax)
-	{
-	int i,ret;
-	long l;
-	const unsigned char *p= *pp;
-	int tag,xclass,inf;
-	long max=omax;
-
-	if (!max) goto err;
-	ret=(*p&V_ASN1_CONSTRUCTED);
-	xclass=(*p&V_ASN1_PRIVATE);
-	i= *p&V_ASN1_PRIMITIVE_TAG;
-	if (i == V_ASN1_PRIMITIVE_TAG)
-		{		/* high-tag */
-		p++;
-		if (--max == 0) goto err;
-		l=0;
-		while (*p&0x80)
-			{
-			l<<=7L;
-			l|= *(p++)&0x7f;
-			if (--max == 0) goto err;
-			if (l > (INT_MAX >> 7L)) goto err;
-			}
-		l<<=7L;
-		l|= *(p++)&0x7f;
-		tag=(int)l;
-		if (--max == 0) goto err;
-		}
-	else
-		{ 
-		tag=i;
-		p++;
-		if (--max == 0) goto err;
-		}
-	*ptag=tag;
-	*pclass=xclass;
-	if (!asn1_get_length(&p,&inf,plength,(int)max)) goto err;
-
-#if 0
-	fprintf(stderr,"p=%d + *plength=%ld > omax=%ld + *pp=%d  (%d > %d)\n", 
-		(int)p,*plength,omax,(int)*pp,(int)(p+ *plength),
-		(int)(omax+ *pp));
-
-#endif
-	if (*plength > (omax - (p - *pp)))
-		{
-		ASN1err(ASN1_F_ASN1_GET_OBJECT,ASN1_R_TOO_LONG);
-		/* Set this so that even if things are not long enough
-		 * the values are set correctly */
-		ret|=0x80;
-		}
-	*pp=p;
-	return(ret|inf);
-err:
-	ASN1err(ASN1_F_ASN1_GET_OBJECT,ASN1_R_HEADER_TOO_LONG);
-	return(0x80);
-	}
-
-static int asn1_get_length(const unsigned char **pp, int *inf, long *rl, int max)
-	{
-	const unsigned char *p= *pp;
-	unsigned long ret=0;
-	unsigned int i;
-
-	if (max-- < 1) return(0);
-	if (*p == 0x80)
-		{
-		*inf=1;
-		ret=0;
-		p++;
-		}
-	else
-		{
-		*inf=0;
-		i= *p&0x7f;
-		if (*(p++) & 0x80)
-			{
-			if (i > sizeof(long))
-				return 0;
-			if (max-- == 0) return(0);
-			while (i-- > 0)
-				{
-				ret<<=8L;
-				ret|= *(p++);
-				if (max-- == 0) return(0);
-				}
-			}
-		else
-			ret=i;
-		}
-	if (ret > LONG_MAX)
-		return 0;
-	*pp=p;
-	*rl=(long)ret;
-	return(1);
-	}
-
-/* class 0 is constructed
- * constructed == 2 for indefinite length constructed */
-void ASN1_put_object(unsigned char **pp, int constructed, int length, int tag,
-	     int xclass)
-	{
-	unsigned char *p= *pp;
-	int i, ttag;
-
-	i=(constructed)?V_ASN1_CONSTRUCTED:0;
-	i|=(xclass&V_ASN1_PRIVATE);
-	if (tag < 31)
-		*(p++)=i|(tag&V_ASN1_PRIMITIVE_TAG);
-	else
-		{
-		*(p++)=i|V_ASN1_PRIMITIVE_TAG;
-		for(i = 0, ttag = tag; ttag > 0; i++) ttag >>=7;
-		ttag = i;
-		while(i-- > 0)
-			{
-			p[i] = tag & 0x7f;
-			if(i != (ttag - 1)) p[i] |= 0x80;
-			tag >>= 7;
-			}
-		p += ttag;
-		}
-	if (constructed == 2)
-		*(p++)=0x80;
-	else
-		asn1_put_length(&p,length);
-	*pp=p;
-	}
-
-int ASN1_put_eoc(unsigned char **pp)
-	{
-	unsigned char *p = *pp;
-	*p++ = 0;
-	*p++ = 0;
-	*pp = p;
-	return 2;
-	}
-
-static void asn1_put_length(unsigned char **pp, int length)
-	{
-	unsigned char *p= *pp;
-	int i,l;
-	if (length <= 127)
-		*(p++)=(unsigned char)length;
-	else
-		{
-		l=length;
-		for (i=0; l > 0; i++)
-			l>>=8;
-		*(p++)=i|0x80;
-		l=i;
-		while (i-- > 0)
-			{
-			p[i]=length&0xff;
-			length>>=8;
-			}
-		p+=l;
-		}
-	*pp=p;
-	}
-
-int ASN1_object_size(int constructed, int length, int tag)
-	{
-	int ret;
-
-	ret=length;
-	ret++;
-	if (tag >= 31)
-		{
-		while (tag > 0)
-			{
-			tag>>=7;
-			ret++;
-			}
-		}
-	if (constructed == 2)
-		return ret + 3;
-	ret++;
-	if (length > 127)
-		{
-		while (length > 0)
-			{
-			length>>=8;
-			ret++;
-			}
-		}
-	return(ret);
-	}
-
-static int _asn1_Finish(ASN1_const_CTX *c)
-	{
-	if ((c->inf == (1|V_ASN1_CONSTRUCTED)) && (!c->eos))
-		{
-		if (!ASN1_const_check_infinite_end(&c->p,c->slen))
-			{
-			c->error=ERR_R_MISSING_ASN1_EOS;
-			return(0);
-			}
-		}
-	if (	((c->slen != 0) && !(c->inf & 1)) ||
-		((c->slen < 0) && (c->inf & 1)))
-		{
-		c->error=ERR_R_ASN1_LENGTH_MISMATCH;
-		return(0);
-		}
-	return(1);
-	}
-
-int asn1_Finish(ASN1_CTX *c)
-	{
-	return _asn1_Finish((ASN1_const_CTX *)c);
-	}
-
-int asn1_const_Finish(ASN1_const_CTX *c)
-	{
-	return _asn1_Finish(c);
-	}
-
-int asn1_GetSequence(ASN1_const_CTX *c, long *length)
-	{
-	const unsigned char *q;
-
-	q=c->p;
-	c->inf=ASN1_get_object(&(c->p),&(c->slen),&(c->tag),&(c->xclass),
-		*length);
-	if (c->inf & 0x80)
-		{
-		c->error=ERR_R_BAD_GET_ASN1_OBJECT_CALL;
-		return(0);
-		}
-	if (c->tag != V_ASN1_SEQUENCE)
-		{
-		c->error=ERR_R_EXPECTING_AN_ASN1_SEQUENCE;
-		return(0);
-		}
-	(*length)-=(c->p-q);
-	if (c->max && (*length < 0))
-		{
-		c->error=ERR_R_ASN1_LENGTH_MISMATCH;
-		return(0);
-		}
-	if (c->inf == (1|V_ASN1_CONSTRUCTED))
-		c->slen= *length+ *(c->pp)-c->p;
-	c->eos=0;
-	return(1);
-	}
-
-ASN1_STRING *ASN1_STRING_dup(ASN1_STRING *str)
-	{
-	ASN1_STRING *ret;
-
-	if (str == NULL) return(NULL);
-	if ((ret=ASN1_STRING_type_new(str->type)) == NULL)
-		return(NULL);
-	if (!ASN1_STRING_set(ret,str->data,str->length))
-		{
-		ASN1_STRING_free(ret);
-		return(NULL);
-		}
-	ret->flags = str->flags;
-	return(ret);
-	}
-
-int ASN1_STRING_set(ASN1_STRING *str, const void *_data, int len)
-	{
-	unsigned char *c;
-	const char *data=_data;
-
-	if (len < 0)
-		{
-		if (data == NULL)
-			return(0);
-		else
-			len=strlen(data);
-		}
-	if ((str->length < len) || (str->data == NULL))
-		{
-		c=str->data;
-		if (c == NULL)
-			str->data=OPENSSL_malloc(len+1);
-		else
-			str->data=OPENSSL_realloc(c,len+1);
-
-		if (str->data == NULL)
-			{
-			ASN1err(ASN1_F_ASN1_STRING_SET,ERR_R_MALLOC_FAILURE);
-			str->data=c;
-			return(0);
-			}
-		}
-	str->length=len;
-	if (data != NULL)
-		{
-		memcpy(str->data,data,len);
-		/* an allowance for strings :-) */
-		str->data[len]='\0';
-		}
-	return(1);
-	}
-
-ASN1_STRING *ASN1_STRING_new(void)
-	{
-	return(ASN1_STRING_type_new(V_ASN1_OCTET_STRING));
-	}
-
-
-ASN1_STRING *ASN1_STRING_type_new(int type)
-	{
-	ASN1_STRING *ret;
-
-	ret=(ASN1_STRING *)OPENSSL_malloc(sizeof(ASN1_STRING));
-	if (ret == NULL)
-		{
-		ASN1err(ASN1_F_ASN1_STRING_TYPE_NEW,ERR_R_MALLOC_FAILURE);
-		return(NULL);
-		}
-	ret->length=0;
-	ret->type=type;
-	ret->data=NULL;
-	ret->flags=0;
-	return(ret);
-	}
-
-void ASN1_STRING_free(ASN1_STRING *a)
-	{
-	if (a == NULL) return;
-	if (a->data != NULL) OPENSSL_free(a->data);
-	OPENSSL_free(a);
-	}
-
-int ASN1_STRING_cmp(ASN1_STRING *a, ASN1_STRING *b)
-	{
-	int i;
-
-	i=(a->length-b->length);
-	if (i == 0)
-		{
-		i=memcmp(a->data,b->data,a->length);
-		if (i == 0)
-			return(a->type-b->type);
-		else
-			return(i);
-		}
-	else
-		return(i);
-	}
-
-void asn1_add_error(const unsigned char *address, int offset)
-	{
-	char buf1[DECIMAL_SIZE(address)+1],buf2[DECIMAL_SIZE(offset)+1];
-
-	BIO_snprintf(buf1,sizeof buf1,"%lu",(unsigned long)address);
-	BIO_snprintf(buf2,sizeof buf2,"%d",offset);
-	ERR_add_error_data(4,"address=",buf1," offset=",buf2);
-	}
-
-int ASN1_STRING_length(ASN1_STRING *x)
-{ return M_ASN1_STRING_length(x); }
-
-void ASN1_STRING_length_set(ASN1_STRING *x, int len)
-{ M_ASN1_STRING_length_set(x, len); return; }
-
-int ASN1_STRING_type(ASN1_STRING *x)
-{ return M_ASN1_STRING_type(x); }
-
-unsigned char * ASN1_STRING_data(ASN1_STRING *x)
-{ return M_ASN1_STRING_data(x); }
diff --git a/crypto/openssl/crypto/asn1/asn1_mac.h b/crypto/openssl/crypto/asn1/asn1_mac.h
deleted file mode 100644
index d958ca60d9dc..000000000000
--- a/crypto/openssl/crypto/asn1/asn1_mac.h
+++ /dev/null
@@ -1,571 +0,0 @@
-/* crypto/asn1/asn1_mac.h */
-/* Copyright (C) 1995-1998 Eric Young (eay@cryptsoft.com)
- * All rights reserved.
- *
- * This package is an SSL implementation written
- * by Eric Young (eay@cryptsoft.com).
- * The implementation was written so as to conform with Netscapes SSL.
- * 
- * This library is free for commercial and non-commercial use as long as
- * the following conditions are aheared to.  The following conditions
- * apply to all code found in this distribution, be it the RC4, RSA,
- * lhash, DES, etc., code; not just the SSL code.  The SSL documentation
- * included with this distribution is covered by the same copyright terms
- * except that the holder is Tim Hudson (tjh@cryptsoft.com).
- * 
- * Copyright remains Eric Young's, and as such any Copyright notices in
- * the code are not to be removed.
- * If this package is used in a product, Eric Young should be given attribution
- * as the author of the parts of the library used.
- * This can be in the form of a textual message at program startup or
- * in documentation (online or textual) provided with the package.
- * 
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions
- * are met:
- * 1. Redistributions of source code must retain the copyright
- *    notice, this list of conditions and the following disclaimer.
- * 2. Redistributions in binary form must reproduce the above copyright
- *    notice, this list of conditions and the following disclaimer in the
- *    documentation and/or other materials provided with the distribution.
- * 3. All advertising materials mentioning features or use of this software
- *    must display the following acknowledgement:
- *    "This product includes cryptographic software written by
- *     Eric Young (eay@cryptsoft.com)"
- *    The word 'cryptographic' can be left out if the rouines from the library
- *    being used are not cryptographic related :-).
- * 4. If you include any Windows specific code (or a derivative thereof) from 
- *    the apps directory (application code) you must include an acknowledgement:
- *    "This product includes software written by Tim Hudson (tjh@cryptsoft.com)"
- * 
- * THIS SOFTWARE IS PROVIDED BY ERIC YOUNG ``AS IS'' AND
- * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
- * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
- * ARE DISCLAIMED.  IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE
- * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
- * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
- * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
- * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
- * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
- * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
- * SUCH DAMAGE.
- * 
- * The licence and distribution terms for any publically available version or
- * derivative of this code cannot be changed.  i.e. this code cannot simply be
- * copied and put under another distribution licence
- * [including the GNU Public Licence.]
- */
-
-#ifndef HEADER_ASN1_MAC_H
-#define HEADER_ASN1_MAC_H
-
-#include <openssl/asn1.h>
-
-#ifdef  __cplusplus
-extern "C" {
-#endif
-
-#ifndef ASN1_MAC_ERR_LIB
-#define ASN1_MAC_ERR_LIB	ERR_LIB_ASN1
-#endif 
-
-#define ASN1_MAC_H_err(f,r,line) \
-	ERR_PUT_error(ASN1_MAC_ERR_LIB,(f),(r),__FILE__,(line))
-
-#define M_ASN1_D2I_vars(a,type,func) \
-	ASN1_const_CTX c; \
-	type ret=NULL; \
-	\
-	c.pp=(const unsigned char **)pp; \
-	c.q= *(const unsigned char **)pp; \
-	c.error=ERR_R_NESTED_ASN1_ERROR; \
-	if ((a == NULL) || ((*a) == NULL)) \
-		{ if ((ret=(type)func()) == NULL) \
-			{ c.line=__LINE__; goto err; } } \
-	else	ret=(*a);
-
-#define M_ASN1_D2I_Init() \
-	c.p= *(const unsigned char **)pp; \
-	c.max=(length == 0)?0:(c.p+length);
-
-#define M_ASN1_D2I_Finish_2(a) \
-	if (!asn1_const_Finish(&c)) \
-		{ c.line=__LINE__; goto err; } \
-	*(const unsigned char **)pp=c.p; \
-	if (a != NULL) (*a)=ret; \
-	return(ret);
-
-#define M_ASN1_D2I_Finish(a,func,e) \
-	M_ASN1_D2I_Finish_2(a); \
-err:\
-	ASN1_MAC_H_err((e),c.error,c.line); \
-	asn1_add_error(*(const unsigned char **)pp,(int)(c.q- *pp)); \
-	if ((ret != NULL) && ((a == NULL) || (*a != ret))) func(ret); \
-	return(NULL)
-
-#define M_ASN1_D2I_start_sequence() \
-	if (!asn1_GetSequence(&c,&length)) \
-		{ c.line=__LINE__; goto err; }
-/* Begin reading ASN1 without a surrounding sequence */
-#define M_ASN1_D2I_begin() \
-	c.slen = length;
-
-/* End reading ASN1 with no check on length */
-#define M_ASN1_D2I_Finish_nolen(a, func, e) \
-	*pp=c.p; \
-	if (a != NULL) (*a)=ret; \
-	return(ret); \
-err:\
-	ASN1_MAC_H_err((e),c.error,c.line); \
-	asn1_add_error(*pp,(int)(c.q- *pp)); \
-	if ((ret != NULL) && ((a == NULL) || (*a != ret))) func(ret); \
-	return(NULL)
-
-#define M_ASN1_D2I_end_sequence() \
-	(((c.inf&1) == 0)?(c.slen <= 0): \
-		(c.eos=ASN1_const_check_infinite_end(&c.p,c.slen)))
-
-/* Don't use this with d2i_ASN1_BOOLEAN() */
-#define M_ASN1_D2I_get(b, func) \
-	c.q=c.p; \
-	if (func(&(b),&c.p,c.slen) == NULL) \
-		{c.line=__LINE__; goto err; } \
-	c.slen-=(c.p-c.q);
-
-/* Don't use this with d2i_ASN1_BOOLEAN() */
-#define M_ASN1_D2I_get_x(type,b,func) \
-	c.q=c.p; \
-	if (((D2I_OF(type))func)(&(b),&c.p,c.slen) == NULL) \
-		{c.line=__LINE__; goto err; } \
-	c.slen-=(c.p-c.q);
-
-/* use this instead () */
-#define M_ASN1_D2I_get_int(b,func) \
-	c.q=c.p; \
-	if (func(&(b),&c.p,c.slen) < 0) \
-		{c.line=__LINE__; goto err; } \
-	c.slen-=(c.p-c.q);
-
-#define M_ASN1_D2I_get_opt(b,func,type) \
-	if ((c.slen != 0) && ((M_ASN1_next & (~V_ASN1_CONSTRUCTED)) \
-		== (V_ASN1_UNIVERSAL|(type)))) \
-		{ \
-		M_ASN1_D2I_get(b,func); \
-		}
-
-#define M_ASN1_D2I_get_imp(b,func, type) \
-	M_ASN1_next=(_tmp& V_ASN1_CONSTRUCTED)|type; \
-	c.q=c.p; \
-	if (func(&(b),&c.p,c.slen) == NULL) \
-		{c.line=__LINE__; M_ASN1_next_prev = _tmp; goto err; } \
-	c.slen-=(c.p-c.q);\
-	M_ASN1_next_prev=_tmp;
-
-#define M_ASN1_D2I_get_IMP_opt(b,func,tag,type) \
-	if ((c.slen != 0) && ((M_ASN1_next & (~V_ASN1_CONSTRUCTED)) == \
-		(V_ASN1_CONTEXT_SPECIFIC|(tag)))) \
-		{ \
-		unsigned char _tmp = M_ASN1_next; \
-		M_ASN1_D2I_get_imp(b,func, type);\
-		}
-
-#define M_ASN1_D2I_get_set(r,func,free_func) \
-		M_ASN1_D2I_get_imp_set(r,func,free_func, \
-			V_ASN1_SET,V_ASN1_UNIVERSAL);
-
-#define M_ASN1_D2I_get_set_type(type,r,func,free_func) \
-		M_ASN1_D2I_get_imp_set_type(type,r,func,free_func, \
-			V_ASN1_SET,V_ASN1_UNIVERSAL);
-
-#define M_ASN1_D2I_get_set_opt(r,func,free_func) \
-	if ((c.slen != 0) && (M_ASN1_next == (V_ASN1_UNIVERSAL| \
-		V_ASN1_CONSTRUCTED|V_ASN1_SET)))\
-		{ M_ASN1_D2I_get_set(r,func,free_func); }
-
-#define M_ASN1_D2I_get_set_opt_type(type,r,func,free_func) \
-	if ((c.slen != 0) && (M_ASN1_next == (V_ASN1_UNIVERSAL| \
-		V_ASN1_CONSTRUCTED|V_ASN1_SET)))\
-		{ M_ASN1_D2I_get_set_type(type,r,func,free_func); }
-
-#define M_ASN1_I2D_len_SET_opt(a,f) \
-	if ((a != NULL) && (sk_num(a) != 0)) \
-		M_ASN1_I2D_len_SET(a,f);
-
-#define M_ASN1_I2D_put_SET_opt(a,f) \
-	if ((a != NULL) && (sk_num(a) != 0)) \
-		M_ASN1_I2D_put_SET(a,f);
-
-#define M_ASN1_I2D_put_SEQUENCE_opt(a,f) \
-	if ((a != NULL) && (sk_num(a) != 0)) \
-		M_ASN1_I2D_put_SEQUENCE(a,f);
-
-#define M_ASN1_I2D_put_SEQUENCE_opt_type(type,a,f) \
-	if ((a != NULL) && (sk_##type##_num(a) != 0)) \
-		M_ASN1_I2D_put_SEQUENCE_type(type,a,f);
-
-#define M_ASN1_D2I_get_IMP_set_opt(b,func,free_func,tag) \
-	if ((c.slen != 0) && \
-		(M_ASN1_next == \
-		(V_ASN1_CONTEXT_SPECIFIC|V_ASN1_CONSTRUCTED|(tag))))\
-		{ \
-		M_ASN1_D2I_get_imp_set(b,func,free_func,\
-			tag,V_ASN1_CONTEXT_SPECIFIC); \
-		}
-
-#define M_ASN1_D2I_get_IMP_set_opt_type(type,b,func,free_func,tag) \
-	if ((c.slen != 0) && \
-		(M_ASN1_next == \
-		(V_ASN1_CONTEXT_SPECIFIC|V_ASN1_CONSTRUCTED|(tag))))\
-		{ \
-		M_ASN1_D2I_get_imp_set_type(type,b,func,free_func,\
-			tag,V_ASN1_CONTEXT_SPECIFIC); \
-		}
-
-#define M_ASN1_D2I_get_seq(r,func,free_func) \
-		M_ASN1_D2I_get_imp_set(r,func,free_func,\
-			V_ASN1_SEQUENCE,V_ASN1_UNIVERSAL);
-
-#define M_ASN1_D2I_get_seq_type(type,r,func,free_func) \
-		M_ASN1_D2I_get_imp_set_type(type,r,func,free_func,\
-					    V_ASN1_SEQUENCE,V_ASN1_UNIVERSAL)
-
-#define M_ASN1_D2I_get_seq_opt(r,func,free_func) \
-	if ((c.slen != 0) && (M_ASN1_next == (V_ASN1_UNIVERSAL| \
-		V_ASN1_CONSTRUCTED|V_ASN1_SEQUENCE)))\
-		{ M_ASN1_D2I_get_seq(r,func,free_func); }
-
-#define M_ASN1_D2I_get_seq_opt_type(type,r,func,free_func) \
-	if ((c.slen != 0) && (M_ASN1_next == (V_ASN1_UNIVERSAL| \
-		V_ASN1_CONSTRUCTED|V_ASN1_SEQUENCE)))\
-		{ M_ASN1_D2I_get_seq_type(type,r,func,free_func); }
-
-#define M_ASN1_D2I_get_IMP_set(r,func,free_func,x) \
-		M_ASN1_D2I_get_imp_set(r,func,free_func,\
-			x,V_ASN1_CONTEXT_SPECIFIC);
-
-#define M_ASN1_D2I_get_IMP_set_type(type,r,func,free_func,x) \
-		M_ASN1_D2I_get_imp_set_type(type,r,func,free_func,\
-			x,V_ASN1_CONTEXT_SPECIFIC);
-
-#define M_ASN1_D2I_get_imp_set(r,func,free_func,a,b) \
-	c.q=c.p; \
-	if (d2i_ASN1_SET(&(r),&c.p,c.slen,(char *(*)())func,\
-		(void (*)())free_func,a,b) == NULL) \
-		{ c.line=__LINE__; goto err; } \
-	c.slen-=(c.p-c.q);
-
-#define M_ASN1_D2I_get_imp_set_type(type,r,func,free_func,a,b) \
-	c.q=c.p; \
-	if (d2i_ASN1_SET_OF_##type(&(r),&c.p,c.slen,func,\
-				   free_func,a,b) == NULL) \
-		{ c.line=__LINE__; goto err; } \
-	c.slen-=(c.p-c.q);
-
-#define M_ASN1_D2I_get_set_strings(r,func,a,b) \
-	c.q=c.p; \
-	if (d2i_ASN1_STRING_SET(&(r),&c.p,c.slen,a,b) == NULL) \
-		{ c.line=__LINE__; goto err; } \
-	c.slen-=(c.p-c.q);
-
-#define M_ASN1_D2I_get_EXP_opt(r,func,tag) \
-	if ((c.slen != 0L) && (M_ASN1_next == \
-		(V_ASN1_CONSTRUCTED|V_ASN1_CONTEXT_SPECIFIC|tag))) \
-		{ \
-		int Tinf,Ttag,Tclass; \
-		long Tlen; \
-		\
-		c.q=c.p; \
-		Tinf=ASN1_get_object(&c.p,&Tlen,&Ttag,&Tclass,c.slen); \
-		if (Tinf & 0x80) \
-			{ c.error=ERR_R_BAD_ASN1_OBJECT_HEADER; \
-			c.line=__LINE__; goto err; } \
-		if (Tinf == (V_ASN1_CONSTRUCTED+1)) \
-					Tlen = c.slen - (c.p - c.q) - 2; \
-		if (func(&(r),&c.p,Tlen) == NULL) \
-			{ c.line=__LINE__; goto err; } \
-		if (Tinf == (V_ASN1_CONSTRUCTED+1)) { \
-			Tlen = c.slen - (c.p - c.q); \
-			if(!ASN1_const_check_infinite_end(&c.p, Tlen)) \
-				{ c.error=ERR_R_MISSING_ASN1_EOS; \
-				c.line=__LINE__; goto err; } \
-		}\
-		c.slen-=(c.p-c.q); \
-		}
-
-#define M_ASN1_D2I_get_EXP_set_opt(r,func,free_func,tag,b) \
-	if ((c.slen != 0) && (M_ASN1_next == \
-		(V_ASN1_CONSTRUCTED|V_ASN1_CONTEXT_SPECIFIC|tag))) \
-		{ \
-		int Tinf,Ttag,Tclass; \
-		long Tlen; \
-		\
-		c.q=c.p; \
-		Tinf=ASN1_get_object(&c.p,&Tlen,&Ttag,&Tclass,c.slen); \
-		if (Tinf & 0x80) \
-			{ c.error=ERR_R_BAD_ASN1_OBJECT_HEADER; \
-			c.line=__LINE__; goto err; } \
-		if (Tinf == (V_ASN1_CONSTRUCTED+1)) \
-					Tlen = c.slen - (c.p - c.q) - 2; \
-		if (d2i_ASN1_SET(&(r),&c.p,Tlen,(char *(*)())func, \
-			(void (*)())free_func, \
-			b,V_ASN1_UNIVERSAL) == NULL) \
-			{ c.line=__LINE__; goto err; } \
-		if (Tinf == (V_ASN1_CONSTRUCTED+1)) { \
-			Tlen = c.slen - (c.p - c.q); \
-			if(!ASN1_check_infinite_end(&c.p, Tlen)) \
-				{ c.error=ERR_R_MISSING_ASN1_EOS; \
-				c.line=__LINE__; goto err; } \
-		}\
-		c.slen-=(c.p-c.q); \
-		}
-
-#define M_ASN1_D2I_get_EXP_set_opt_type(type,r,func,free_func,tag,b) \
-	if ((c.slen != 0) && (M_ASN1_next == \
-		(V_ASN1_CONSTRUCTED|V_ASN1_CONTEXT_SPECIFIC|tag))) \
-		{ \
-		int Tinf,Ttag,Tclass; \
-		long Tlen; \
-		\
-		c.q=c.p; \
-		Tinf=ASN1_get_object(&c.p,&Tlen,&Ttag,&Tclass,c.slen); \
-		if (Tinf & 0x80) \
-			{ c.error=ERR_R_BAD_ASN1_OBJECT_HEADER; \
-			c.line=__LINE__; goto err; } \
-		if (Tinf == (V_ASN1_CONSTRUCTED+1)) \
-					Tlen = c.slen - (c.p - c.q) - 2; \
-		if (d2i_ASN1_SET_OF_##type(&(r),&c.p,Tlen,func, \
-			free_func,b,V_ASN1_UNIVERSAL) == NULL) \
-			{ c.line=__LINE__; goto err; } \
-		if (Tinf == (V_ASN1_CONSTRUCTED+1)) { \
-			Tlen = c.slen - (c.p - c.q); \
-			if(!ASN1_check_infinite_end(&c.p, Tlen)) \
-				{ c.error=ERR_R_MISSING_ASN1_EOS; \
-				c.line=__LINE__; goto err; } \
-		}\
-		c.slen-=(c.p-c.q); \
-		}
-
-/* New macros */
-#define M_ASN1_New_Malloc(ret,type) \
-	if ((ret=(type *)OPENSSL_malloc(sizeof(type))) == NULL) \
-		{ c.line=__LINE__; goto err2; }
-
-#define M_ASN1_New(arg,func) \
-	if (((arg)=func()) == NULL) return(NULL)
-
-#define M_ASN1_New_Error(a) \
-/*	err:	ASN1_MAC_H_err((a),ERR_R_NESTED_ASN1_ERROR,c.line); \
-		return(NULL);*/ \
-	err2:	ASN1_MAC_H_err((a),ERR_R_MALLOC_FAILURE,c.line); \
-		return(NULL)
-
-
-/* BIG UGLY WARNING!  This is so damn ugly I wanna puke.  Unfortunately,
-   some macros that use ASN1_const_CTX still insist on writing in the input
-   stream.  ARGH!  ARGH!  ARGH!  Let's get rid of this macro package.
-   Please?						-- Richard Levitte */
-#define M_ASN1_next		(*((unsigned char *)(c.p)))
-#define M_ASN1_next_prev	(*((unsigned char *)(c.q)))
-
-/*************************************************/
-
-#define M_ASN1_I2D_vars(a)	int r=0,ret=0; \
-				unsigned char *p; \
-				if (a == NULL) return(0)
-
-/* Length Macros */
-#define M_ASN1_I2D_len(a,f)	ret+=f(a,NULL)
-#define M_ASN1_I2D_len_IMP_opt(a,f)	if (a != NULL) M_ASN1_I2D_len(a,f)
-
-#define M_ASN1_I2D_len_SET(a,f) \
-		ret+=i2d_ASN1_SET(a,NULL,f,V_ASN1_SET,V_ASN1_UNIVERSAL,IS_SET);
-
-#define M_ASN1_I2D_len_SET_type(type,a,f) \
-		ret+=i2d_ASN1_SET_OF_##type(a,NULL,f,V_ASN1_SET, \
-					    V_ASN1_UNIVERSAL,IS_SET);
-
-#define M_ASN1_I2D_len_SEQUENCE(a,f) \
-		ret+=i2d_ASN1_SET(a,NULL,f,V_ASN1_SEQUENCE,V_ASN1_UNIVERSAL, \
-				  IS_SEQUENCE);
-
-#define M_ASN1_I2D_len_SEQUENCE_type(type,a,f) \
-		ret+=i2d_ASN1_SET_OF_##type(a,NULL,f,V_ASN1_SEQUENCE, \
-					    V_ASN1_UNIVERSAL,IS_SEQUENCE)
-
-#define M_ASN1_I2D_len_SEQUENCE_opt(a,f) \
-		if ((a != NULL) && (sk_num(a) != 0)) \
-			M_ASN1_I2D_len_SEQUENCE(a,f);
-
-#define M_ASN1_I2D_len_SEQUENCE_opt_type(type,a,f) \
-		if ((a != NULL) && (sk_##type##_num(a) != 0)) \
-			M_ASN1_I2D_len_SEQUENCE_type(type,a,f);
-
-#define M_ASN1_I2D_len_IMP_SET(a,f,x) \
-		ret+=i2d_ASN1_SET(a,NULL,f,x,V_ASN1_CONTEXT_SPECIFIC,IS_SET);
-
-#define M_ASN1_I2D_len_IMP_SET_type(type,a,f,x) \
-		ret+=i2d_ASN1_SET_OF_##type(a,NULL,f,x, \
-					    V_ASN1_CONTEXT_SPECIFIC,IS_SET);
-
-#define M_ASN1_I2D_len_IMP_SET_opt(a,f,x) \
-		if ((a != NULL) && (sk_num(a) != 0)) \
-			ret+=i2d_ASN1_SET(a,NULL,f,x,V_ASN1_CONTEXT_SPECIFIC, \
-					  IS_SET);
-
-#define M_ASN1_I2D_len_IMP_SET_opt_type(type,a,f,x) \
-		if ((a != NULL) && (sk_##type##_num(a) != 0)) \
-			ret+=i2d_ASN1_SET_OF_##type(a,NULL,f,x, \
-					       V_ASN1_CONTEXT_SPECIFIC,IS_SET);
-
-#define M_ASN1_I2D_len_IMP_SEQUENCE(a,f,x) \
-		ret+=i2d_ASN1_SET(a,NULL,f,x,V_ASN1_CONTEXT_SPECIFIC, \
-				  IS_SEQUENCE);
-
-#define M_ASN1_I2D_len_IMP_SEQUENCE_opt(a,f,x) \
-		if ((a != NULL) && (sk_num(a) != 0)) \
-			ret+=i2d_ASN1_SET(a,NULL,f,x,V_ASN1_CONTEXT_SPECIFIC, \
-					  IS_SEQUENCE);
-
-#define M_ASN1_I2D_len_IMP_SEQUENCE_opt_type(type,a,f,x) \
-		if ((a != NULL) && (sk_##type##_num(a) != 0)) \
-			ret+=i2d_ASN1_SET_OF_##type(a,NULL,f,x, \
-						    V_ASN1_CONTEXT_SPECIFIC, \
-						    IS_SEQUENCE);
-
-#define M_ASN1_I2D_len_EXP_opt(a,f,mtag,v) \
-		if (a != NULL)\
-			{ \
-			v=f(a,NULL); \
-			ret+=ASN1_object_size(1,v,mtag); \
-			}
-
-#define M_ASN1_I2D_len_EXP_SET_opt(a,f,mtag,tag,v) \
-		if ((a != NULL) && (sk_num(a) != 0))\
-			{ \
-			v=i2d_ASN1_SET(a,NULL,f,tag,V_ASN1_UNIVERSAL,IS_SET); \
-			ret+=ASN1_object_size(1,v,mtag); \
-			}
-
-#define M_ASN1_I2D_len_EXP_SEQUENCE_opt(a,f,mtag,tag,v) \
-		if ((a != NULL) && (sk_num(a) != 0))\
-			{ \
-			v=i2d_ASN1_SET(a,NULL,f,tag,V_ASN1_UNIVERSAL, \
-				       IS_SEQUENCE); \
-			ret+=ASN1_object_size(1,v,mtag); \
-			}
-
-#define M_ASN1_I2D_len_EXP_SEQUENCE_opt_type(type,a,f,mtag,tag,v) \
-		if ((a != NULL) && (sk_##type##_num(a) != 0))\
-			{ \
-			v=i2d_ASN1_SET_OF_##type(a,NULL,f,tag, \
-						 V_ASN1_UNIVERSAL, \
-						 IS_SEQUENCE); \
-			ret+=ASN1_object_size(1,v,mtag); \
-			}
-
-/* Put Macros */
-#define M_ASN1_I2D_put(a,f)	f(a,&p)
-
-#define M_ASN1_I2D_put_IMP_opt(a,f,t)	\
-		if (a != NULL) \
-			{ \
-			unsigned char *q=p; \
-			f(a,&p); \
-			*q=(V_ASN1_CONTEXT_SPECIFIC|t|(*q&V_ASN1_CONSTRUCTED));\
-			}
-
-#define M_ASN1_I2D_put_SET(a,f) i2d_ASN1_SET(a,&p,f,V_ASN1_SET,\
-			V_ASN1_UNIVERSAL,IS_SET)
-#define M_ASN1_I2D_put_SET_type(type,a,f) \
-     i2d_ASN1_SET_OF_##type(a,&p,f,V_ASN1_SET,V_ASN1_UNIVERSAL,IS_SET)
-#define M_ASN1_I2D_put_IMP_SET(a,f,x) i2d_ASN1_SET(a,&p,f,x,\
-			V_ASN1_CONTEXT_SPECIFIC,IS_SET)
-#define M_ASN1_I2D_put_IMP_SET_type(type,a,f,x) \
-     i2d_ASN1_SET_OF_##type(a,&p,f,x,V_ASN1_CONTEXT_SPECIFIC,IS_SET)
-#define M_ASN1_I2D_put_IMP_SEQUENCE(a,f,x) i2d_ASN1_SET(a,&p,f,x,\
-			V_ASN1_CONTEXT_SPECIFIC,IS_SEQUENCE)
-
-#define M_ASN1_I2D_put_SEQUENCE(a,f) i2d_ASN1_SET(a,&p,f,V_ASN1_SEQUENCE,\
-					     V_ASN1_UNIVERSAL,IS_SEQUENCE)
-
-#define M_ASN1_I2D_put_SEQUENCE_type(type,a,f) \
-     i2d_ASN1_SET_OF_##type(a,&p,f,V_ASN1_SEQUENCE,V_ASN1_UNIVERSAL, \
-			    IS_SEQUENCE)
-
-#define M_ASN1_I2D_put_SEQUENCE_opt(a,f) \
-		if ((a != NULL) && (sk_num(a) != 0)) \
-			M_ASN1_I2D_put_SEQUENCE(a,f);
-
-#define M_ASN1_I2D_put_IMP_SET_opt(a,f,x) \
-		if ((a != NULL) && (sk_num(a) != 0)) \
-			{ i2d_ASN1_SET(a,&p,f,x,V_ASN1_CONTEXT_SPECIFIC, \
-				       IS_SET); }
-
-#define M_ASN1_I2D_put_IMP_SET_opt_type(type,a,f,x) \
-		if ((a != NULL) && (sk_##type##_num(a) != 0)) \
-			{ i2d_ASN1_SET_OF_##type(a,&p,f,x, \
-						 V_ASN1_CONTEXT_SPECIFIC, \
-						 IS_SET); }
-
-#define M_ASN1_I2D_put_IMP_SEQUENCE_opt(a,f,x) \
-		if ((a != NULL) && (sk_num(a) != 0)) \
-			{ i2d_ASN1_SET(a,&p,f,x,V_ASN1_CONTEXT_SPECIFIC, \
-				       IS_SEQUENCE); }
-
-#define M_ASN1_I2D_put_IMP_SEQUENCE_opt_type(type,a,f,x) \
-		if ((a != NULL) && (sk_##type##_num(a) != 0)) \
-			{ i2d_ASN1_SET_OF_##type(a,&p,f,x, \
-						 V_ASN1_CONTEXT_SPECIFIC, \
-						 IS_SEQUENCE); }
-
-#define M_ASN1_I2D_put_EXP_opt(a,f,tag,v) \
-		if (a != NULL) \
-			{ \
-			ASN1_put_object(&p,1,v,tag,V_ASN1_CONTEXT_SPECIFIC); \
-			f(a,&p); \
-			}
-
-#define M_ASN1_I2D_put_EXP_SET_opt(a,f,mtag,tag,v) \
-		if ((a != NULL) && (sk_num(a) != 0)) \
-			{ \
-			ASN1_put_object(&p,1,v,mtag,V_ASN1_CONTEXT_SPECIFIC); \
-			i2d_ASN1_SET(a,&p,f,tag,V_ASN1_UNIVERSAL,IS_SET); \
-			}
-
-#define M_ASN1_I2D_put_EXP_SEQUENCE_opt(a,f,mtag,tag,v) \
-		if ((a != NULL) && (sk_num(a) != 0)) \
-			{ \
-			ASN1_put_object(&p,1,v,mtag,V_ASN1_CONTEXT_SPECIFIC); \
-			i2d_ASN1_SET(a,&p,f,tag,V_ASN1_UNIVERSAL,IS_SEQUENCE); \
-			}
-
-#define M_ASN1_I2D_put_EXP_SEQUENCE_opt_type(type,a,f,mtag,tag,v) \
-		if ((a != NULL) && (sk_##type##_num(a) != 0)) \
-			{ \
-			ASN1_put_object(&p,1,v,mtag,V_ASN1_CONTEXT_SPECIFIC); \
-			i2d_ASN1_SET_OF_##type(a,&p,f,tag,V_ASN1_UNIVERSAL, \
-					       IS_SEQUENCE); \
-			}
-
-#define M_ASN1_I2D_seq_total() \
-		r=ASN1_object_size(1,ret,V_ASN1_SEQUENCE); \
-		if (pp == NULL) return(r); \
-		p= *pp; \
-		ASN1_put_object(&p,1,ret,V_ASN1_SEQUENCE,V_ASN1_UNIVERSAL)
-
-#define M_ASN1_I2D_INF_seq_start(tag,ctx) \
-		*(p++)=(V_ASN1_CONSTRUCTED|(tag)|(ctx)); \
-		*(p++)=0x80
-
-#define M_ASN1_I2D_INF_seq_end() *(p++)=0x00; *(p++)=0x00
-
-#define M_ASN1_I2D_finish()	*pp=p; \
-				return(r);
-
-int asn1_GetSequence(ASN1_const_CTX *c, long *length);
-void asn1_add_error(const unsigned char *address,int offset);
-#ifdef  __cplusplus
-}
-#endif
-
-#endif
diff --git a/crypto/openssl/crypto/asn1/asn1_par.c b/crypto/openssl/crypto/asn1/asn1_par.c
deleted file mode 100644
index 501b62a4b199..000000000000
--- a/crypto/openssl/crypto/asn1/asn1_par.c
+++ /dev/null
@@ -1,442 +0,0 @@
-/* crypto/asn1/asn1_par.c */
-/* Copyright (C) 1995-1998 Eric Young (eay@cryptsoft.com)
- * All rights reserved.
- *
- * This package is an SSL implementation written
- * by Eric Young (eay@cryptsoft.com).
- * The implementation was written so as to conform with Netscapes SSL.
- * 
- * This library is free for commercial and non-commercial use as long as
- * the following conditions are aheared to.  The following conditions
- * apply to all code found in this distribution, be it the RC4, RSA,
- * lhash, DES, etc., code; not just the SSL code.  The SSL documentation
- * included with this distribution is covered by the same copyright terms
- * except that the holder is Tim Hudson (tjh@cryptsoft.com).
- * 
- * Copyright remains Eric Young's, and as such any Copyright notices in
- * the code are not to be removed.
- * If this package is used in a product, Eric Young should be given attribution
- * as the author of the parts of the library used.
- * This can be in the form of a textual message at program startup or
- * in documentation (online or textual) provided with the package.
- * 
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions
- * are met:
- * 1. Redistributions of source code must retain the copyright
- *    notice, this list of conditions and the following disclaimer.
- * 2. Redistributions in binary form must reproduce the above copyright
- *    notice, this list of conditions and the following disclaimer in the
- *    documentation and/or other materials provided with the distribution.
- * 3. All advertising materials mentioning features or use of this software
- *    must display the following acknowledgement:
- *    "This product includes cryptographic software written by
- *     Eric Young (eay@cryptsoft.com)"
- *    The word 'cryptographic' can be left out if the rouines from the library
- *    being used are not cryptographic related :-).
- * 4. If you include any Windows specific code (or a derivative thereof) from 
- *    the apps directory (application code) you must include an acknowledgement:
- *    "This product includes software written by Tim Hudson (tjh@cryptsoft.com)"
- * 
- * THIS SOFTWARE IS PROVIDED BY ERIC YOUNG ``AS IS'' AND
- * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
- * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
- * ARE DISCLAIMED.  IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE
- * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
- * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
- * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
- * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
- * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
- * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
- * SUCH DAMAGE.
- * 
- * The licence and distribution terms for any publically available version or
- * derivative of this code cannot be changed.  i.e. this code cannot simply be
- * copied and put under another distribution licence
- * [including the GNU Public Licence.]
- */
-
-#include <stdio.h>
-#include "cryptlib.h"
-#include <openssl/buffer.h>
-#include <openssl/objects.h>
-#include <openssl/asn1.h>
-
-static int asn1_print_info(BIO *bp, int tag, int xclass,int constructed,
-	int indent);
-static int asn1_parse2(BIO *bp, const unsigned char **pp, long length,
-	int offset, int depth, int indent, int dump);
-static int asn1_print_info(BIO *bp, int tag, int xclass, int constructed,
-	     int indent)
-	{
-	static const char fmt[]="%-18s";
-	static const char fmt2[]="%2d %-15s";
-	char str[128];
-	const char *p,*p2=NULL;
-
-	if (constructed & V_ASN1_CONSTRUCTED)
-		p="cons: ";
-	else
-		p="prim: ";
-	if (BIO_write(bp,p,6) < 6) goto err;
-	BIO_indent(bp,indent,128);
-
-	p=str;
-	if ((xclass & V_ASN1_PRIVATE) == V_ASN1_PRIVATE)
-		BIO_snprintf(str,sizeof str,"priv [ %d ] ",tag);
-	else if ((xclass & V_ASN1_CONTEXT_SPECIFIC) == V_ASN1_CONTEXT_SPECIFIC)
-		BIO_snprintf(str,sizeof str,"cont [ %d ]",tag);
-	else if ((xclass & V_ASN1_APPLICATION) == V_ASN1_APPLICATION)
-		BIO_snprintf(str,sizeof str,"appl [ %d ]",tag);
-	else if (tag > 30)
-		BIO_snprintf(str,sizeof str,"<ASN1 %d>",tag);
-	else
-		p = ASN1_tag2str(tag);
-
-	if (p2 != NULL)
-		{
-		if (BIO_printf(bp,fmt2,tag,p2) <= 0) goto err;
-		}
-	else
-		{
-		if (BIO_printf(bp,fmt,p) <= 0) goto err;
-		}
-	return(1);
-err:
-	return(0);
-	}
-
-int ASN1_parse(BIO *bp, const unsigned char *pp, long len, int indent)
-	{
-	return(asn1_parse2(bp,&pp,len,0,0,indent,0));
-	}
-
-int ASN1_parse_dump(BIO *bp, const unsigned char *pp, long len, int indent, int dump)
-	{
-	return(asn1_parse2(bp,&pp,len,0,0,indent,dump));
-	}
-
-static int asn1_parse2(BIO *bp, const unsigned char **pp, long length, int offset,
-	     int depth, int indent, int dump)
-	{
-	const unsigned char *p,*ep,*tot,*op,*opp;
-	long len;
-	int tag,xclass,ret=0;
-	int nl,hl,j,r;
-	ASN1_OBJECT *o=NULL;
-	ASN1_OCTET_STRING *os=NULL;
-	/* ASN1_BMPSTRING *bmp=NULL;*/
-	int dump_indent;
-
-#if 0
-	dump_indent = indent;
-#else
-	dump_indent = 6;	/* Because we know BIO_dump_indent() */
-#endif
-	p= *pp;
-	tot=p+length;
-	op=p-1;
-	while ((p < tot) && (op < p))
-		{
-		op=p;
-		j=ASN1_get_object(&p,&len,&tag,&xclass,length);
-#ifdef LINT
-		j=j;
-#endif
-		if (j & 0x80)
-			{
-			if (BIO_write(bp,"Error in encoding\n",18) <= 0)
-				goto end;
-			ret=0;
-			goto end;
-			}
-		hl=(p-op);
-		length-=hl;
-		/* if j == 0x21 it is a constructed indefinite length object */
-		if (BIO_printf(bp,"%5ld:",(long)offset+(long)(op- *pp))
-			<= 0) goto end;
-
-		if (j != (V_ASN1_CONSTRUCTED | 1))
-			{
-			if (BIO_printf(bp,"d=%-2d hl=%ld l=%4ld ",
-				depth,(long)hl,len) <= 0)
-				goto end;
-			}
-		else
-			{
-			if (BIO_printf(bp,"d=%-2d hl=%ld l=inf  ",
-				depth,(long)hl) <= 0)
-				goto end;
-			}
-		if (!asn1_print_info(bp,tag,xclass,j,(indent)?depth:0))
-			goto end;
-		if (j & V_ASN1_CONSTRUCTED)
-			{
-			ep=p+len;
-			if (BIO_write(bp,"\n",1) <= 0) goto end;
-			if (len > length)
-				{
-				BIO_printf(bp,
-					"length is greater than %ld\n",length);
-				ret=0;
-				goto end;
-				}
-			if ((j == 0x21) && (len == 0))
-				{
-				for (;;)
-					{
-					r=asn1_parse2(bp,&p,(long)(tot-p),
-						offset+(p - *pp),depth+1,
-						indent,dump);
-					if (r == 0) { ret=0; goto end; }
-					if ((r == 2) || (p >= tot)) break;
-					}
-				}
-			else
-				while (p < ep)
-					{
-					r=asn1_parse2(bp,&p,(long)len,
-						offset+(p - *pp),depth+1,
-						indent,dump);
-					if (r == 0) { ret=0; goto end; }
-					}
-			}
-		else if (xclass != 0)
-			{
-			p+=len;
-			if (BIO_write(bp,"\n",1) <= 0) goto end;
-			}
-		else
-			{
-			nl=0;
-			if (	(tag == V_ASN1_PRINTABLESTRING) ||
-				(tag == V_ASN1_T61STRING) ||
-				(tag == V_ASN1_IA5STRING) ||
-				(tag == V_ASN1_VISIBLESTRING) ||
-				(tag == V_ASN1_UTCTIME) ||
-				(tag == V_ASN1_GENERALIZEDTIME))
-				{
-				if (BIO_write(bp,":",1) <= 0) goto end;
-				if ((len > 0) &&
-					BIO_write(bp,(const char *)p,(int)len)
-					!= (int)len)
-					goto end;
-				}
-			else if (tag == V_ASN1_OBJECT)
-				{
-				opp=op;
-				if (d2i_ASN1_OBJECT(&o,&opp,len+hl) != NULL)
-					{
-					if (BIO_write(bp,":",1) <= 0) goto end;
-					i2a_ASN1_OBJECT(bp,o);
-					}
-				else
-					{
-					if (BIO_write(bp,":BAD OBJECT",11) <= 0)
-						goto end;
-					}
-				}
-			else if (tag == V_ASN1_BOOLEAN)
-				{
-				int ii;
-
-				opp=op;
-				ii=d2i_ASN1_BOOLEAN(NULL,&opp,len+hl);
-				if (ii < 0)
-					{
-					if (BIO_write(bp,"Bad boolean\n",12))
-						goto end;
-					}
-				BIO_printf(bp,":%d",ii);
-				}
-			else if (tag == V_ASN1_BMPSTRING)
-				{
-				/* do the BMP thang */
-				}
-			else if (tag == V_ASN1_OCTET_STRING)
-				{
-				int i,printable=1;
-
-				opp=op;
-				os=d2i_ASN1_OCTET_STRING(NULL,&opp,len+hl);
-				if (os != NULL && os->length > 0)
-					{
-					opp = os->data;
-					/* testing whether the octet string is
-					 * printable */
-					for (i=0; i<os->length; i++)
-						{
-						if ((	(opp[i] < ' ') &&
-							(opp[i] != '\n') &&
-							(opp[i] != '\r') &&
-							(opp[i] != '\t')) ||
-							(opp[i] > '~'))
-							{
-							printable=0;
-							break;
-							}
-						}
-					if (printable)
-					/* printable string */
-						{
-						if (BIO_write(bp,":",1) <= 0)
-							goto end;
-						if (BIO_write(bp,(const char *)opp,
-							os->length) <= 0)
-							goto end;
-						}
-					else if (!dump)
-					/* not printable => print octet string
-					 * as hex dump */
-						{
-						if (BIO_write(bp,"[HEX DUMP]:",11) <= 0)
-							goto end;
-						for (i=0; i<os->length; i++)
-							{
-							if (BIO_printf(bp,"%02X"
-								, opp[i]) <= 0)
-								goto end;
-							}
-						}
-					else
-					/* print the normal dump */
-						{
-						if (!nl) 
-							{
-							if (BIO_write(bp,"\n",1) <= 0)
-								goto end;
-							}
-						if (BIO_dump_indent(bp,
-							(const char *)opp,
-							((dump == -1 || dump > 
-							os->length)?os->length:dump),
-							dump_indent) <= 0)
-							goto end;
-						nl=1;
-						}
-					}
-				if (os != NULL)
-					{
-					M_ASN1_OCTET_STRING_free(os);
-					os=NULL;
-					}
-				}
-			else if (tag == V_ASN1_INTEGER)
-				{
-				ASN1_INTEGER *bs;
-				int i;
-
-				opp=op;
-				bs=d2i_ASN1_INTEGER(NULL,&opp,len+hl);
-				if (bs != NULL)
-					{
-					if (BIO_write(bp,":",1) <= 0) goto end;
-					if (bs->type == V_ASN1_NEG_INTEGER)
-						if (BIO_write(bp,"-",1) <= 0)
-							goto end;
-					for (i=0; i<bs->length; i++)
-						{
-						if (BIO_printf(bp,"%02X",
-							bs->data[i]) <= 0)
-							goto end;
-						}
-					if (bs->length == 0)
-						{
-						if (BIO_write(bp,"00",2) <= 0)
-							goto end;
-						}
-					}
-				else
-					{
-					if (BIO_write(bp,"BAD INTEGER",11) <= 0)
-						goto end;
-					}
-				M_ASN1_INTEGER_free(bs);
-				}
-			else if (tag == V_ASN1_ENUMERATED)
-				{
-				ASN1_ENUMERATED *bs;
-				int i;
-
-				opp=op;
-				bs=d2i_ASN1_ENUMERATED(NULL,&opp,len+hl);
-				if (bs != NULL)
-					{
-					if (BIO_write(bp,":",1) <= 0) goto end;
-					if (bs->type == V_ASN1_NEG_ENUMERATED)
-						if (BIO_write(bp,"-",1) <= 0)
-							goto end;
-					for (i=0; i<bs->length; i++)
-						{
-						if (BIO_printf(bp,"%02X",
-							bs->data[i]) <= 0)
-							goto end;
-						}
-					if (bs->length == 0)
-						{
-						if (BIO_write(bp,"00",2) <= 0)
-							goto end;
-						}
-					}
-				else
-					{
-					if (BIO_write(bp,"BAD ENUMERATED",11) <= 0)
-						goto end;
-					}
-				M_ASN1_ENUMERATED_free(bs);
-				}
-			else if (len > 0 && dump)
-				{
-				if (!nl) 
-					{
-					if (BIO_write(bp,"\n",1) <= 0)
-						goto end;
-					}
-				if (BIO_dump_indent(bp,(const char *)p,
-					((dump == -1 || dump > len)?len:dump),
-					dump_indent) <= 0)
-					goto end;
-				nl=1;
-				}
-
-			if (!nl) 
-				{
-				if (BIO_write(bp,"\n",1) <= 0) goto end;
-				}
-			p+=len;
-			if ((tag == V_ASN1_EOC) && (xclass == 0))
-				{
-				ret=2; /* End of sequence */
-				goto end;
-				}
-			}
-		length-=len;
-		}
-	ret=1;
-end:
-	if (o != NULL) ASN1_OBJECT_free(o);
-	if (os != NULL) M_ASN1_OCTET_STRING_free(os);
-	*pp=p;
-	return(ret);
-	}
-
-const char *ASN1_tag2str(int tag)
-{
-	static const char *tag2str[] = {
-	 "EOC", "BOOLEAN", "INTEGER", "BIT STRING", "OCTET STRING", /* 0-4 */
-	 "NULL", "OBJECT", "OBJECT DESCRIPTOR", "EXTERNAL", "REAL", /* 5-9 */
-	 "ENUMERATED", "<ASN1 11>", "UTF8STRING", "<ASN1 13>", 	    /* 10-13 */
-	"<ASN1 14>", "<ASN1 15>", "SEQUENCE", "SET", 		    /* 15-17 */
-	"NUMERICSTRING", "PRINTABLESTRING", "T61STRING",	    /* 18-20 */
-	"VIDEOTEXSTRING", "IA5STRING", "UTCTIME","GENERALIZEDTIME", /* 21-24 */
-	"GRAPHICSTRING", "VISIBLESTRING", "GENERALSTRING",	    /* 25-27 */
-	"UNIVERSALSTRING", "<ASN1 29>", "BMPSTRING"		    /* 28-30 */
-	};
-
-	if((tag == V_ASN1_NEG_INTEGER) || (tag == V_ASN1_NEG_ENUMERATED))
-							tag &= ~0x100;
-
-	if(tag < 0 || tag > 30) return "(unknown)";
-	return tag2str[tag];
-}
-
diff --git a/crypto/openssl/crypto/asn1/asn1t.h b/crypto/openssl/crypto/asn1/asn1t.h
deleted file mode 100644
index adbc2a63dd0f..000000000000
--- a/crypto/openssl/crypto/asn1/asn1t.h
+++ /dev/null
@@ -1,886 +0,0 @@
-/* asn1t.h */
-/* Written by Dr Stephen N Henson (shenson@bigfoot.com) for the OpenSSL
- * project 2000.
- */
-/* ====================================================================
- * Copyright (c) 2000 The OpenSSL Project.  All rights reserved.
- *
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions
- * are met:
- *
- * 1. Redistributions of source code must retain the above copyright
- *    notice, this list of conditions and the following disclaimer. 
- *
- * 2. Redistributions in binary form must reproduce the above copyright
- *    notice, this list of conditions and the following disclaimer in
- *    the documentation and/or other materials provided with the
- *    distribution.
- *
- * 3. All advertising materials mentioning features or use of this
- *    software must display the following acknowledgment:
- *    "This product includes software developed by the OpenSSL Project
- *    for use in the OpenSSL Toolkit. (http://www.OpenSSL.org/)"
- *
- * 4. The names "OpenSSL Toolkit" and "OpenSSL Project" must not be used to
- *    endorse or promote products derived from this software without
- *    prior written permission. For written permission, please contact
- *    licensing@OpenSSL.org.
- *
- * 5. Products derived from this software may not be called "OpenSSL"
- *    nor may "OpenSSL" appear in their names without prior written
- *    permission of the OpenSSL Project.
- *
- * 6. Redistributions of any form whatsoever must retain the following
- *    acknowledgment:
- *    "This product includes software developed by the OpenSSL Project
- *    for use in the OpenSSL Toolkit (http://www.OpenSSL.org/)"
- *
- * THIS SOFTWARE IS PROVIDED BY THE OpenSSL PROJECT ``AS IS'' AND ANY
- * EXPRESSED OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
- * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR
- * PURPOSE ARE DISCLAIMED.  IN NO EVENT SHALL THE OpenSSL PROJECT OR
- * ITS CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
- * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
- * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
- * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
- * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
- * STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
- * ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED
- * OF THE POSSIBILITY OF SUCH DAMAGE.
- * ====================================================================
- *
- * This product includes cryptographic software written by Eric Young
- * (eay@cryptsoft.com).  This product includes software written by Tim
- * Hudson (tjh@cryptsoft.com).
- *
- */
-#ifndef HEADER_ASN1T_H
-#define HEADER_ASN1T_H
-
-#include <stddef.h>
-#include <openssl/e_os2.h>
-#include <openssl/asn1.h>
-
-#ifdef OPENSSL_BUILD_SHLIBCRYPTO
-# undef OPENSSL_EXTERN
-# define OPENSSL_EXTERN OPENSSL_EXPORT
-#endif
-
-/* ASN1 template defines, structures and functions */
-
-#ifdef  __cplusplus
-extern "C" {
-#endif
-
-
-#ifndef OPENSSL_EXPORT_VAR_AS_FUNCTION
-
-/* Macro to obtain ASN1_ADB pointer from a type (only used internally) */
-#define ASN1_ADB_ptr(iptr) ((const ASN1_ADB *)(iptr))
-
-
-/* Macros for start and end of ASN1_ITEM definition */
-
-#define ASN1_ITEM_start(itname) \
-	OPENSSL_GLOBAL const ASN1_ITEM itname##_it = {
-
-#define ASN1_ITEM_end(itname) \
-		};
-
-#else
-
-/* Macro to obtain ASN1_ADB pointer from a type (only used internally) */
-#define ASN1_ADB_ptr(iptr) ((const ASN1_ADB *)(iptr()))
-
-
-/* Macros for start and end of ASN1_ITEM definition */
-
-#define ASN1_ITEM_start(itname) \
-	const ASN1_ITEM * itname##_it(void) \
-	{ \
-		static const ASN1_ITEM local_it = { 
-
-#define ASN1_ITEM_end(itname) \
-		}; \
-	return &local_it; \
-	}
-
-#endif
-
-
-/* Macros to aid ASN1 template writing */
-
-#define ASN1_ITEM_TEMPLATE(tname) \
-	static const ASN1_TEMPLATE tname##_item_tt 
-
-#define ASN1_ITEM_TEMPLATE_END(tname) \
-	;\
-	ASN1_ITEM_start(tname) \
-		ASN1_ITYPE_PRIMITIVE,\
-		-1,\
-		&tname##_item_tt,\
-		0,\
-		NULL,\
-		0,\
-		#tname \
-	ASN1_ITEM_end(tname)
-
-
-/* This is a ASN1 type which just embeds a template */
- 
-/* This pair helps declare a SEQUENCE. We can do:
- *
- * 	ASN1_SEQUENCE(stname) = {
- * 		... SEQUENCE components ...
- * 	} ASN1_SEQUENCE_END(stname)
- *
- * 	This will produce an ASN1_ITEM called stname_it
- *	for a structure called stname.
- *
- * 	If you want the same structure but a different
- *	name then use:
- *
- * 	ASN1_SEQUENCE(itname) = {
- * 		... SEQUENCE components ...
- * 	} ASN1_SEQUENCE_END_name(stname, itname)
- *
- *	This will create an item called itname_it using
- *	a structure called stname.
- */
-
-#define ASN1_SEQUENCE(tname) \
-	static const ASN1_TEMPLATE tname##_seq_tt[] 
-
-#define ASN1_SEQUENCE_END(stname) ASN1_SEQUENCE_END_name(stname, stname)
-
-#define ASN1_SEQUENCE_END_name(stname, tname) \
-	;\
-	ASN1_ITEM_start(tname) \
-		ASN1_ITYPE_SEQUENCE,\
-		V_ASN1_SEQUENCE,\
-		tname##_seq_tt,\
-		sizeof(tname##_seq_tt) / sizeof(ASN1_TEMPLATE),\
-		NULL,\
-		sizeof(stname),\
-		#stname \
-	ASN1_ITEM_end(tname)
-
-#define ASN1_NDEF_SEQUENCE(tname) \
-	ASN1_SEQUENCE(tname)
-
-#define ASN1_SEQUENCE_cb(tname, cb) \
-	static const ASN1_AUX tname##_aux = {NULL, 0, 0, 0, cb, 0}; \
-	ASN1_SEQUENCE(tname)
-
-#define ASN1_BROKEN_SEQUENCE(tname) \
-	static const ASN1_AUX tname##_aux = {NULL, ASN1_AFLG_BROKEN, 0, 0, 0, 0}; \
-	ASN1_SEQUENCE(tname)
-
-#define ASN1_SEQUENCE_ref(tname, cb, lck) \
-	static const ASN1_AUX tname##_aux = {NULL, ASN1_AFLG_REFCOUNT, offsetof(tname, references), lck, cb, 0}; \
-	ASN1_SEQUENCE(tname)
-
-#define ASN1_SEQUENCE_enc(tname, enc, cb) \
-	static const ASN1_AUX tname##_aux = {NULL, ASN1_AFLG_ENCODING, 0, 0, cb, offsetof(tname, enc)}; \
-	ASN1_SEQUENCE(tname)
-
-#define ASN1_NDEF_SEQUENCE_END(tname) \
-	;\
-	ASN1_ITEM_start(tname) \
-		ASN1_ITYPE_NDEF_SEQUENCE,\
-		V_ASN1_SEQUENCE,\
-		tname##_seq_tt,\
-		sizeof(tname##_seq_tt) / sizeof(ASN1_TEMPLATE),\
-		NULL,\
-		sizeof(tname),\
-		#tname \
-	ASN1_ITEM_end(tname)
-
-#define ASN1_BROKEN_SEQUENCE_END(stname) ASN1_SEQUENCE_END_ref(stname, stname)
-
-#define ASN1_SEQUENCE_END_enc(stname, tname) ASN1_SEQUENCE_END_ref(stname, tname)
-
-#define ASN1_SEQUENCE_END_cb(stname, tname) ASN1_SEQUENCE_END_ref(stname, tname)
-
-#define ASN1_SEQUENCE_END_ref(stname, tname) \
-	;\
-	ASN1_ITEM_start(tname) \
-		ASN1_ITYPE_SEQUENCE,\
-		V_ASN1_SEQUENCE,\
-		tname##_seq_tt,\
-		sizeof(tname##_seq_tt) / sizeof(ASN1_TEMPLATE),\
-		&tname##_aux,\
-		sizeof(stname),\
-		#stname \
-	ASN1_ITEM_end(tname)
-
-
-/* This pair helps declare a CHOICE type. We can do:
- *
- * 	ASN1_CHOICE(chname) = {
- * 		... CHOICE options ...
- * 	ASN1_CHOICE_END(chname)
- *
- * 	This will produce an ASN1_ITEM called chname_it
- *	for a structure called chname. The structure
- *	definition must look like this:
- *	typedef struct {
- *		int type;
- *		union {
- *			ASN1_SOMETHING *opt1;
- *			ASN1_SOMEOTHER *opt2;
- *		} value;
- *	} chname;
- *	
- *	the name of the selector must be 'type'.
- * 	to use an alternative selector name use the
- *      ASN1_CHOICE_END_selector() version.
- */
-
-#define ASN1_CHOICE(tname) \
-	static const ASN1_TEMPLATE tname##_ch_tt[] 
-
-#define ASN1_CHOICE_cb(tname, cb) \
-	static const ASN1_AUX tname##_aux = {NULL, 0, 0, 0, cb, 0}; \
-	ASN1_CHOICE(tname)
-
-#define ASN1_CHOICE_END(stname) ASN1_CHOICE_END_name(stname, stname)
-
-#define ASN1_CHOICE_END_name(stname, tname) ASN1_CHOICE_END_selector(stname, tname, type)
-
-#define ASN1_CHOICE_END_selector(stname, tname, selname) \
-	;\
-	ASN1_ITEM_start(tname) \
-		ASN1_ITYPE_CHOICE,\
-		offsetof(stname,selname) ,\
-		tname##_ch_tt,\
-		sizeof(tname##_ch_tt) / sizeof(ASN1_TEMPLATE),\
-		NULL,\
-		sizeof(stname),\
-		#stname \
-	ASN1_ITEM_end(tname)
-
-#define ASN1_CHOICE_END_cb(stname, tname, selname) \
-	;\
-	ASN1_ITEM_start(tname) \
-		ASN1_ITYPE_CHOICE,\
-		offsetof(stname,selname) ,\
-		tname##_ch_tt,\
-		sizeof(tname##_ch_tt) / sizeof(ASN1_TEMPLATE),\
-		&tname##_aux,\
-		sizeof(stname),\
-		#stname \
-	ASN1_ITEM_end(tname)
-
-/* This helps with the template wrapper form of ASN1_ITEM */
-
-#define ASN1_EX_TEMPLATE_TYPE(flags, tag, name, type) { \
-	(flags), (tag), 0,\
-	#name, ASN1_ITEM_ref(type) }
-
-/* These help with SEQUENCE or CHOICE components */
-
-/* used to declare other types */
-
-#define ASN1_EX_TYPE(flags, tag, stname, field, type) { \
-	(flags), (tag), offsetof(stname, field),\
-	#field, ASN1_ITEM_ref(type) }
-
-/* used when the structure is combined with the parent */
-
-#define ASN1_EX_COMBINE(flags, tag, type) { \
-	(flags)|ASN1_TFLG_COMBINE, (tag), 0, NULL, ASN1_ITEM_ref(type) }
-
-/* implicit and explicit helper macros */
-
-#define ASN1_IMP_EX(stname, field, type, tag, ex) \
-		ASN1_EX_TYPE(ASN1_TFLG_IMPLICIT | ex, tag, stname, field, type)
-
-#define ASN1_EXP_EX(stname, field, type, tag, ex) \
-		ASN1_EX_TYPE(ASN1_TFLG_EXPLICIT | ex, tag, stname, field, type)
-
-/* Any defined by macros: the field used is in the table itself */
-
-#ifndef OPENSSL_EXPORT_VAR_AS_FUNCTION
-#define ASN1_ADB_OBJECT(tblname) { ASN1_TFLG_ADB_OID, -1, 0, #tblname, (const ASN1_ITEM *)&(tblname##_adb) }
-#define ASN1_ADB_INTEGER(tblname) { ASN1_TFLG_ADB_INT, -1, 0, #tblname, (const ASN1_ITEM *)&(tblname##_adb) }
-#else
-#define ASN1_ADB_OBJECT(tblname) { ASN1_TFLG_ADB_OID, -1, 0, #tblname, tblname##_adb }
-#define ASN1_ADB_INTEGER(tblname) { ASN1_TFLG_ADB_INT, -1, 0, #tblname, tblname##_adb }
-#endif
-/* Plain simple type */
-#define ASN1_SIMPLE(stname, field, type) ASN1_EX_TYPE(0,0, stname, field, type)
-
-/* OPTIONAL simple type */
-#define ASN1_OPT(stname, field, type) ASN1_EX_TYPE(ASN1_TFLG_OPTIONAL, 0, stname, field, type)
-
-/* IMPLICIT tagged simple type */
-#define ASN1_IMP(stname, field, type, tag) ASN1_IMP_EX(stname, field, type, tag, 0)
-
-/* IMPLICIT tagged OPTIONAL simple type */
-#define ASN1_IMP_OPT(stname, field, type, tag) ASN1_IMP_EX(stname, field, type, tag, ASN1_TFLG_OPTIONAL)
-
-/* Same as above but EXPLICIT */
-
-#define ASN1_EXP(stname, field, type, tag) ASN1_EXP_EX(stname, field, type, tag, 0)
-#define ASN1_EXP_OPT(stname, field, type, tag) ASN1_EXP_EX(stname, field, type, tag, ASN1_TFLG_OPTIONAL)
-
-/* SEQUENCE OF type */
-#define ASN1_SEQUENCE_OF(stname, field, type) \
-		ASN1_EX_TYPE(ASN1_TFLG_SEQUENCE_OF, 0, stname, field, type)
-
-/* OPTIONAL SEQUENCE OF */
-#define ASN1_SEQUENCE_OF_OPT(stname, field, type) \
-		ASN1_EX_TYPE(ASN1_TFLG_SEQUENCE_OF|ASN1_TFLG_OPTIONAL, 0, stname, field, type)
-
-/* Same as above but for SET OF */
-
-#define ASN1_SET_OF(stname, field, type) \
-		ASN1_EX_TYPE(ASN1_TFLG_SET_OF, 0, stname, field, type)
-
-#define ASN1_SET_OF_OPT(stname, field, type) \
-		ASN1_EX_TYPE(ASN1_TFLG_SET_OF|ASN1_TFLG_OPTIONAL, 0, stname, field, type)
-
-/* Finally compound types of SEQUENCE, SET, IMPLICIT, EXPLICIT and OPTIONAL */
-
-#define ASN1_IMP_SET_OF(stname, field, type, tag) \
-			ASN1_IMP_EX(stname, field, type, tag, ASN1_TFLG_SET_OF)
-
-#define ASN1_EXP_SET_OF(stname, field, type, tag) \
-			ASN1_EXP_EX(stname, field, type, tag, ASN1_TFLG_SET_OF)
-
-#define ASN1_IMP_SET_OF_OPT(stname, field, type, tag) \
-			ASN1_IMP_EX(stname, field, type, tag, ASN1_TFLG_SET_OF|ASN1_TFLG_OPTIONAL)
-
-#define ASN1_EXP_SET_OF_OPT(stname, field, type, tag) \
-			ASN1_EXP_EX(stname, field, type, tag, ASN1_TFLG_SET_OF|ASN1_TFLG_OPTIONAL)
-
-#define ASN1_IMP_SEQUENCE_OF(stname, field, type, tag) \
-			ASN1_IMP_EX(stname, field, type, tag, ASN1_TFLG_SEQUENCE_OF)
-
-#define ASN1_IMP_SEQUENCE_OF_OPT(stname, field, type, tag) \
-			ASN1_IMP_EX(stname, field, type, tag, ASN1_TFLG_SEQUENCE_OF|ASN1_TFLG_OPTIONAL)
-
-#define ASN1_EXP_SEQUENCE_OF(stname, field, type, tag) \
-			ASN1_EXP_EX(stname, field, type, tag, ASN1_TFLG_SEQUENCE_OF)
-
-#define ASN1_EXP_SEQUENCE_OF_OPT(stname, field, type, tag) \
-			ASN1_EXP_EX(stname, field, type, tag, ASN1_TFLG_SEQUENCE_OF|ASN1_TFLG_OPTIONAL)
-
-/* EXPLICIT OPTIONAL using indefinite length constructed form */
-#define ASN1_NDEF_EXP_OPT(stname, field, type, tag) \
-			ASN1_EXP_EX(stname, field, type, tag, ASN1_TFLG_OPTIONAL|ASN1_TFLG_NDEF)
-
-/* Macros for the ASN1_ADB structure */
-
-#define ASN1_ADB(name) \
-	static const ASN1_ADB_TABLE name##_adbtbl[] 
-
-#ifndef OPENSSL_EXPORT_VAR_AS_FUNCTION
-
-#define ASN1_ADB_END(name, flags, field, app_table, def, none) \
-	;\
-	static const ASN1_ADB name##_adb = {\
-		flags,\
-		offsetof(name, field),\
-		app_table,\
-		name##_adbtbl,\
-		sizeof(name##_adbtbl) / sizeof(ASN1_ADB_TABLE),\
-		def,\
-		none\
-	}
-
-#else
-
-#define ASN1_ADB_END(name, flags, field, app_table, def, none) \
-	;\
-	static const ASN1_ITEM *name##_adb(void) \
-	{ \
-	static const ASN1_ADB internal_adb = \
-		{\
-		flags,\
-		offsetof(name, field),\
-		app_table,\
-		name##_adbtbl,\
-		sizeof(name##_adbtbl) / sizeof(ASN1_ADB_TABLE),\
-		def,\
-		none\
-		}; \
-		return (const ASN1_ITEM *) &internal_adb; \
-	} \
-	void dummy_function(void)
-
-#endif
-
-#define ADB_ENTRY(val, template) {val, template}
-
-#define ASN1_ADB_TEMPLATE(name) \
-	static const ASN1_TEMPLATE name##_tt 
-
-/* This is the ASN1 template structure that defines
- * a wrapper round the actual type. It determines the
- * actual position of the field in the value structure,
- * various flags such as OPTIONAL and the field name.
- */
-
-struct ASN1_TEMPLATE_st {
-unsigned long flags;		/* Various flags */
-long tag;			/* tag, not used if no tagging */
-unsigned long offset;		/* Offset of this field in structure */
-#ifndef NO_ASN1_FIELD_NAMES
-const char *field_name;		/* Field name */
-#endif
-ASN1_ITEM_EXP *item;		/* Relevant ASN1_ITEM or ASN1_ADB */
-};
-
-/* Macro to extract ASN1_ITEM and ASN1_ADB pointer from ASN1_TEMPLATE */
-
-#define ASN1_TEMPLATE_item(t) (t->item_ptr)
-#define ASN1_TEMPLATE_adb(t) (t->item_ptr)
-
-typedef struct ASN1_ADB_TABLE_st ASN1_ADB_TABLE;
-typedef struct ASN1_ADB_st ASN1_ADB;
-
-struct ASN1_ADB_st {
-	unsigned long flags;	/* Various flags */
-	unsigned long offset;	/* Offset of selector field */
-	STACK_OF(ASN1_ADB_TABLE) **app_items; /* Application defined items */
-	const ASN1_ADB_TABLE *tbl;	/* Table of possible types */
-	long tblcount;		/* Number of entries in tbl */
-	const ASN1_TEMPLATE *default_tt;  /* Type to use if no match */
-	const ASN1_TEMPLATE *null_tt;  /* Type to use if selector is NULL */
-};
-
-struct ASN1_ADB_TABLE_st {
-	long value;		/* NID for an object or value for an int */
-	const ASN1_TEMPLATE tt;		/* item for this value */
-};
-
-/* template flags */
-
-/* Field is optional */
-#define ASN1_TFLG_OPTIONAL	(0x1)
-
-/* Field is a SET OF */
-#define ASN1_TFLG_SET_OF	(0x1 << 1)
-
-/* Field is a SEQUENCE OF */
-#define ASN1_TFLG_SEQUENCE_OF	(0x2 << 1)
-
-/* Special case: this refers to a SET OF that
- * will be sorted into DER order when encoded *and*
- * the corresponding STACK will be modified to match
- * the new order.
- */
-#define ASN1_TFLG_SET_ORDER	(0x3 << 1)
-
-/* Mask for SET OF or SEQUENCE OF */
-#define ASN1_TFLG_SK_MASK	(0x3 << 1)
-
-/* These flags mean the tag should be taken from the
- * tag field. If EXPLICIT then the underlying type
- * is used for the inner tag.
- */
-
-/* IMPLICIT tagging */
-#define ASN1_TFLG_IMPTAG	(0x1 << 3)
-
-
-/* EXPLICIT tagging, inner tag from underlying type */
-#define ASN1_TFLG_EXPTAG	(0x2 << 3)
-
-#define ASN1_TFLG_TAG_MASK	(0x3 << 3)
-
-/* context specific IMPLICIT */
-#define ASN1_TFLG_IMPLICIT	ASN1_TFLG_IMPTAG|ASN1_TFLG_CONTEXT
-
-/* context specific EXPLICIT */
-#define ASN1_TFLG_EXPLICIT	ASN1_TFLG_EXPTAG|ASN1_TFLG_CONTEXT
-
-/* If tagging is in force these determine the
- * type of tag to use. Otherwise the tag is
- * determined by the underlying type. These 
- * values reflect the actual octet format.
- */
-
-/* Universal tag */ 
-#define ASN1_TFLG_UNIVERSAL	(0x0<<6)
-/* Application tag */ 
-#define ASN1_TFLG_APPLICATION	(0x1<<6)
-/* Context specific tag */ 
-#define ASN1_TFLG_CONTEXT	(0x2<<6)
-/* Private tag */ 
-#define ASN1_TFLG_PRIVATE	(0x3<<6)
-
-#define ASN1_TFLG_TAG_CLASS	(0x3<<6)
-
-/* These are for ANY DEFINED BY type. In this case
- * the 'item' field points to an ASN1_ADB structure
- * which contains a table of values to decode the
- * relevant type
- */
-
-#define ASN1_TFLG_ADB_MASK	(0x3<<8)
-
-#define ASN1_TFLG_ADB_OID	(0x1<<8)
-
-#define ASN1_TFLG_ADB_INT	(0x1<<9)
-
-/* This flag means a parent structure is passed
- * instead of the field: this is useful is a
- * SEQUENCE is being combined with a CHOICE for
- * example. Since this means the structure and
- * item name will differ we need to use the
- * ASN1_CHOICE_END_name() macro for example.
- */
-
-#define ASN1_TFLG_COMBINE	(0x1<<10)
-
-/* This flag when present in a SEQUENCE OF, SET OF
- * or EXPLICIT causes indefinite length constructed
- * encoding to be used if required.
- */
-
-#define ASN1_TFLG_NDEF		(0x1<<11)
-
-/* This is the actual ASN1 item itself */
-
-struct ASN1_ITEM_st {
-char itype;			/* The item type, primitive, SEQUENCE, CHOICE or extern */
-long utype;			/* underlying type */
-const ASN1_TEMPLATE *templates;	/* If SEQUENCE or CHOICE this contains the contents */
-long tcount;			/* Number of templates if SEQUENCE or CHOICE */
-const void *funcs;		/* functions that handle this type */
-long size;			/* Structure size (usually)*/
-#ifndef NO_ASN1_FIELD_NAMES
-const char *sname;		/* Structure name */
-#endif
-};
-
-/* These are values for the itype field and
- * determine how the type is interpreted.
- *
- * For PRIMITIVE types the underlying type
- * determines the behaviour if items is NULL.
- *
- * Otherwise templates must contain a single 
- * template and the type is treated in the
- * same way as the type specified in the template.
- *
- * For SEQUENCE types the templates field points
- * to the members, the size field is the
- * structure size.
- *
- * For CHOICE types the templates field points
- * to each possible member (typically a union)
- * and the 'size' field is the offset of the
- * selector.
- *
- * The 'funcs' field is used for application
- * specific functions. 
- *
- * For COMPAT types the funcs field gives a
- * set of functions that handle this type, this
- * supports the old d2i, i2d convention.
- *
- * The EXTERN type uses a new style d2i/i2d.
- * The new style should be used where possible
- * because it avoids things like the d2i IMPLICIT
- * hack.
- *
- * MSTRING is a multiple string type, it is used
- * for a CHOICE of character strings where the
- * actual strings all occupy an ASN1_STRING
- * structure. In this case the 'utype' field
- * has a special meaning, it is used as a mask
- * of acceptable types using the B_ASN1 constants.
- *
- * NDEF_SEQUENCE is the same as SEQUENCE except
- * that it will use indefinite length constructed
- * encoding if requested.
- *
- */
-
-#define ASN1_ITYPE_PRIMITIVE		0x0
-
-#define ASN1_ITYPE_SEQUENCE		0x1
-
-#define ASN1_ITYPE_CHOICE		0x2
-
-#define ASN1_ITYPE_COMPAT		0x3
-
-#define ASN1_ITYPE_EXTERN		0x4
-
-#define ASN1_ITYPE_MSTRING		0x5
-
-#define ASN1_ITYPE_NDEF_SEQUENCE	0x6
-
-/* Cache for ASN1 tag and length, so we
- * don't keep re-reading it for things
- * like CHOICE
- */
-
-struct ASN1_TLC_st{
-	char valid;	/* Values below are valid */
-	int ret;	/* return value */
-	long plen;	/* length */
-	int ptag;	/* class value */
-	int pclass;	/* class value */
-	int hdrlen;	/* header length */
-};
-
-/* Typedefs for ASN1 function pointers */
-
-typedef ASN1_VALUE * ASN1_new_func(void);
-typedef void ASN1_free_func(ASN1_VALUE *a);
-typedef ASN1_VALUE * ASN1_d2i_func(ASN1_VALUE **a, const unsigned char ** in, long length);
-typedef int ASN1_i2d_func(ASN1_VALUE * a, unsigned char **in);
-
-typedef int ASN1_ex_d2i(ASN1_VALUE **pval, const unsigned char **in, long len, const ASN1_ITEM *it,
-					int tag, int aclass, char opt, ASN1_TLC *ctx);
-
-typedef int ASN1_ex_i2d(ASN1_VALUE **pval, unsigned char **out, const ASN1_ITEM *it, int tag, int aclass);
-typedef int ASN1_ex_new_func(ASN1_VALUE **pval, const ASN1_ITEM *it);
-typedef void ASN1_ex_free_func(ASN1_VALUE **pval, const ASN1_ITEM *it);
-
-typedef int ASN1_primitive_i2c(ASN1_VALUE **pval, unsigned char *cont, int *putype, const ASN1_ITEM *it);
-typedef int ASN1_primitive_c2i(ASN1_VALUE **pval, const unsigned char *cont, int len, int utype, char *free_cont, const ASN1_ITEM *it);
-
-typedef struct ASN1_COMPAT_FUNCS_st {
-	ASN1_new_func *asn1_new;
-	ASN1_free_func *asn1_free;
-	ASN1_d2i_func *asn1_d2i;
-	ASN1_i2d_func *asn1_i2d;
-} ASN1_COMPAT_FUNCS;
-
-typedef struct ASN1_EXTERN_FUNCS_st {
-	void *app_data;
-	ASN1_ex_new_func *asn1_ex_new;
-	ASN1_ex_free_func *asn1_ex_free;
-	ASN1_ex_free_func *asn1_ex_clear;
-	ASN1_ex_d2i *asn1_ex_d2i;
-	ASN1_ex_i2d *asn1_ex_i2d;
-} ASN1_EXTERN_FUNCS;
-
-typedef struct ASN1_PRIMITIVE_FUNCS_st {
-	void *app_data;
-	unsigned long flags;
-	ASN1_ex_new_func *prim_new;
-	ASN1_ex_free_func *prim_free;
-	ASN1_ex_free_func *prim_clear;
-	ASN1_primitive_c2i *prim_c2i;
-	ASN1_primitive_i2c *prim_i2c;
-} ASN1_PRIMITIVE_FUNCS;
-
-/* This is the ASN1_AUX structure: it handles various
- * miscellaneous requirements. For example the use of
- * reference counts and an informational callback.
- *
- * The "informational callback" is called at various
- * points during the ASN1 encoding and decoding. It can
- * be used to provide minor customisation of the structures
- * used. This is most useful where the supplied routines
- * *almost* do the right thing but need some extra help
- * at a few points. If the callback returns zero then
- * it is assumed a fatal error has occurred and the 
- * main operation should be abandoned.
- *
- * If major changes in the default behaviour are required
- * then an external type is more appropriate.
- */
-
-typedef int ASN1_aux_cb(int operation, ASN1_VALUE **in, const ASN1_ITEM *it);
-
-typedef struct ASN1_AUX_st {
-	void *app_data;
-	int flags;
-	int ref_offset;		/* Offset of reference value */
-	int ref_lock;		/* Lock type to use */
-	ASN1_aux_cb *asn1_cb;
-	int enc_offset;		/* Offset of ASN1_ENCODING structure */
-} ASN1_AUX;
-
-/* Flags in ASN1_AUX */
-
-/* Use a reference count */
-#define ASN1_AFLG_REFCOUNT	1
-/* Save the encoding of structure (useful for signatures) */
-#define ASN1_AFLG_ENCODING	2
-/* The Sequence length is invalid */
-#define ASN1_AFLG_BROKEN	4
-
-/* operation values for asn1_cb */
-
-#define ASN1_OP_NEW_PRE		0
-#define ASN1_OP_NEW_POST	1
-#define ASN1_OP_FREE_PRE	2
-#define ASN1_OP_FREE_POST	3
-#define ASN1_OP_D2I_PRE		4
-#define ASN1_OP_D2I_POST	5
-#define ASN1_OP_I2D_PRE		6
-#define ASN1_OP_I2D_POST	7
-
-/* Macro to implement a primitive type */
-#define IMPLEMENT_ASN1_TYPE(stname) IMPLEMENT_ASN1_TYPE_ex(stname, stname, 0)
-#define IMPLEMENT_ASN1_TYPE_ex(itname, vname, ex) \
-				ASN1_ITEM_start(itname) \
-					ASN1_ITYPE_PRIMITIVE, V_##vname, NULL, 0, NULL, ex, #itname \
-				ASN1_ITEM_end(itname)
-
-/* Macro to implement a multi string type */
-#define IMPLEMENT_ASN1_MSTRING(itname, mask) \
-				ASN1_ITEM_start(itname) \
-					ASN1_ITYPE_MSTRING, mask, NULL, 0, NULL, sizeof(ASN1_STRING), #itname \
-				ASN1_ITEM_end(itname)
-
-/* Macro to implement an ASN1_ITEM in terms of old style funcs */
-
-#define IMPLEMENT_COMPAT_ASN1(sname) IMPLEMENT_COMPAT_ASN1_type(sname, V_ASN1_SEQUENCE)
-
-#define IMPLEMENT_COMPAT_ASN1_type(sname, tag) \
-	static const ASN1_COMPAT_FUNCS sname##_ff = { \
-		(ASN1_new_func *)sname##_new, \
-		(ASN1_free_func *)sname##_free, \
-		(ASN1_d2i_func *)d2i_##sname, \
-		(ASN1_i2d_func *)i2d_##sname, \
-	}; \
-	ASN1_ITEM_start(sname) \
-		ASN1_ITYPE_COMPAT, \
-		tag, \
-		NULL, \
-		0, \
-		&sname##_ff, \
-		0, \
-		#sname \
-	ASN1_ITEM_end(sname)
-
-#define IMPLEMENT_EXTERN_ASN1(sname, tag, fptrs) \
-	ASN1_ITEM_start(sname) \
-		ASN1_ITYPE_EXTERN, \
-		tag, \
-		NULL, \
-		0, \
-		&fptrs, \
-		0, \
-		#sname \
-	ASN1_ITEM_end(sname)
-
-/* Macro to implement standard functions in terms of ASN1_ITEM structures */
-
-#define IMPLEMENT_ASN1_FUNCTIONS(stname) IMPLEMENT_ASN1_FUNCTIONS_fname(stname, stname, stname)
-
-#define IMPLEMENT_ASN1_FUNCTIONS_name(stname, itname) IMPLEMENT_ASN1_FUNCTIONS_fname(stname, itname, itname)
-
-#define IMPLEMENT_ASN1_FUNCTIONS_ENCODE_name(stname, itname) \
-			IMPLEMENT_ASN1_FUNCTIONS_ENCODE_fname(stname, itname, itname)
-
-#define IMPLEMENT_ASN1_ALLOC_FUNCTIONS(stname) \
-		IMPLEMENT_ASN1_ALLOC_FUNCTIONS_fname(stname, stname, stname)
-
-#define IMPLEMENT_ASN1_ALLOC_FUNCTIONS_fname(stname, itname, fname) \
-	stname *fname##_new(void) \
-	{ \
-		return (stname *)ASN1_item_new(ASN1_ITEM_rptr(itname)); \
-	} \
-	void fname##_free(stname *a) \
-	{ \
-		ASN1_item_free((ASN1_VALUE *)a, ASN1_ITEM_rptr(itname)); \
-	}
-
-#define IMPLEMENT_ASN1_FUNCTIONS_fname(stname, itname, fname) \
-	IMPLEMENT_ASN1_ENCODE_FUNCTIONS_fname(stname, itname, fname) \
-	IMPLEMENT_ASN1_ALLOC_FUNCTIONS_fname(stname, itname, fname)
-
-#define IMPLEMENT_ASN1_ENCODE_FUNCTIONS_fname(stname, itname, fname) \
-	stname *d2i_##fname(stname **a, const unsigned char **in, long len) \
-	{ \
-		return (stname *)ASN1_item_d2i((ASN1_VALUE **)a, in, len, ASN1_ITEM_rptr(itname));\
-	} \
-	int i2d_##fname(stname *a, unsigned char **out) \
-	{ \
-		return ASN1_item_i2d((ASN1_VALUE *)a, out, ASN1_ITEM_rptr(itname));\
-	} 
-
-#define IMPLEMENT_ASN1_NDEF_FUNCTION(stname) \
-	int i2d_##stname##_NDEF(stname *a, unsigned char **out) \
-	{ \
-		return ASN1_item_ndef_i2d((ASN1_VALUE *)a, out, ASN1_ITEM_rptr(stname));\
-	} 
-
-/* This includes evil casts to remove const: they will go away when full
- * ASN1 constification is done.
- */
-#define IMPLEMENT_ASN1_ENCODE_FUNCTIONS_const_fname(stname, itname, fname) \
-	stname *d2i_##fname(stname **a, const unsigned char **in, long len) \
-	{ \
-		return (stname *)ASN1_item_d2i((ASN1_VALUE **)a, in, len, ASN1_ITEM_rptr(itname));\
-	} \
-	int i2d_##fname(const stname *a, unsigned char **out) \
-	{ \
-		return ASN1_item_i2d((ASN1_VALUE *)a, out, ASN1_ITEM_rptr(itname));\
-	} 
-
-#define IMPLEMENT_ASN1_DUP_FUNCTION(stname) \
-	stname * stname##_dup(stname *x) \
-        { \
-        return ASN1_item_dup(ASN1_ITEM_rptr(stname), x); \
-        }
-
-#define IMPLEMENT_ASN1_FUNCTIONS_const(name) \
-		IMPLEMENT_ASN1_FUNCTIONS_const_fname(name, name, name)
-
-#define IMPLEMENT_ASN1_FUNCTIONS_const_fname(stname, itname, fname) \
-	IMPLEMENT_ASN1_ENCODE_FUNCTIONS_const_fname(stname, itname, fname) \
-	IMPLEMENT_ASN1_ALLOC_FUNCTIONS_fname(stname, itname, fname)
-
-/* external definitions for primitive types */
-
-DECLARE_ASN1_ITEM(ASN1_BOOLEAN)
-DECLARE_ASN1_ITEM(ASN1_TBOOLEAN)
-DECLARE_ASN1_ITEM(ASN1_FBOOLEAN)
-DECLARE_ASN1_ITEM(ASN1_SEQUENCE)
-DECLARE_ASN1_ITEM(CBIGNUM)
-DECLARE_ASN1_ITEM(BIGNUM)
-DECLARE_ASN1_ITEM(LONG)
-DECLARE_ASN1_ITEM(ZLONG)
-
-DECLARE_STACK_OF(ASN1_VALUE)
-
-/* Functions used internally by the ASN1 code */
-
-int ASN1_item_ex_new(ASN1_VALUE **pval, const ASN1_ITEM *it);
-void ASN1_item_ex_free(ASN1_VALUE **pval, const ASN1_ITEM *it);
-int ASN1_template_new(ASN1_VALUE **pval, const ASN1_TEMPLATE *tt);
-int ASN1_primitive_new(ASN1_VALUE **pval, const ASN1_ITEM *it);
-
-void ASN1_template_free(ASN1_VALUE **pval, const ASN1_TEMPLATE *tt);
-int ASN1_template_d2i(ASN1_VALUE **pval, const unsigned char **in, long len, const ASN1_TEMPLATE *tt);
-int ASN1_item_ex_d2i(ASN1_VALUE **pval, const unsigned char **in, long len, const ASN1_ITEM *it,
-				int tag, int aclass, char opt, ASN1_TLC *ctx);
-
-int ASN1_item_ex_i2d(ASN1_VALUE **pval, unsigned char **out, const ASN1_ITEM *it, int tag, int aclass);
-int ASN1_template_i2d(ASN1_VALUE **pval, unsigned char **out, const ASN1_TEMPLATE *tt);
-void ASN1_primitive_free(ASN1_VALUE **pval, const ASN1_ITEM *it);
-
-int asn1_ex_i2c(ASN1_VALUE **pval, unsigned char *cont, int *putype, const ASN1_ITEM *it);
-int asn1_ex_c2i(ASN1_VALUE **pval, const unsigned char *cont, int len, int utype, char *free_cont, const ASN1_ITEM *it);
-
-int asn1_get_choice_selector(ASN1_VALUE **pval, const ASN1_ITEM *it);
-int asn1_set_choice_selector(ASN1_VALUE **pval, int value, const ASN1_ITEM *it);
-
-ASN1_VALUE ** asn1_get_field_ptr(ASN1_VALUE **pval, const ASN1_TEMPLATE *tt);
-
-const ASN1_TEMPLATE *asn1_do_adb(ASN1_VALUE **pval, const ASN1_TEMPLATE *tt, int nullerr);
-
-int asn1_do_lock(ASN1_VALUE **pval, int op, const ASN1_ITEM *it);
-
-void asn1_enc_init(ASN1_VALUE **pval, const ASN1_ITEM *it);
-void asn1_enc_free(ASN1_VALUE **pval, const ASN1_ITEM *it);
-int asn1_enc_restore(int *len, unsigned char **out, ASN1_VALUE **pval, const ASN1_ITEM *it);
-int asn1_enc_save(ASN1_VALUE **pval, const unsigned char *in, int inlen, const ASN1_ITEM *it);
-
-#ifdef  __cplusplus
-}
-#endif
-#endif
diff --git a/crypto/openssl/crypto/asn1/asn_moid.c b/crypto/openssl/crypto/asn1/asn_moid.c
deleted file mode 100644
index 72cc1210becd..000000000000
--- a/crypto/openssl/crypto/asn1/asn_moid.c
+++ /dev/null
@@ -1,160 +0,0 @@
-/* asn_moid.c */
-/* Written by Stephen Henson (shenson@bigfoot.com) for the OpenSSL
- * project 2001.
- */
-/* ====================================================================
- * Copyright (c) 2001-2004 The OpenSSL Project.  All rights reserved.
- *
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions
- * are met:
- *
- * 1. Redistributions of source code must retain the above copyright
- *    notice, this list of conditions and the following disclaimer. 
- *
- * 2. Redistributions in binary form must reproduce the above copyright
- *    notice, this list of conditions and the following disclaimer in
- *    the documentation and/or other materials provided with the
- *    distribution.
- *
- * 3. All advertising materials mentioning features or use of this
- *    software must display the following acknowledgment:
- *    "This product includes software developed by the OpenSSL Project
- *    for use in the OpenSSL Toolkit. (http://www.OpenSSL.org/)"
- *
- * 4. The names "OpenSSL Toolkit" and "OpenSSL Project" must not be used to
- *    endorse or promote products derived from this software without
- *    prior written permission. For written permission, please contact
- *    licensing@OpenSSL.org.
- *
- * 5. Products derived from this software may not be called "OpenSSL"
- *    nor may "OpenSSL" appear in their names without prior written
- *    permission of the OpenSSL Project.
- *
- * 6. Redistributions of any form whatsoever must retain the following
- *    acknowledgment:
- *    "This product includes software developed by the OpenSSL Project
- *    for use in the OpenSSL Toolkit (http://www.OpenSSL.org/)"
- *
- * THIS SOFTWARE IS PROVIDED BY THE OpenSSL PROJECT ``AS IS'' AND ANY
- * EXPRESSED OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
- * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR
- * PURPOSE ARE DISCLAIMED.  IN NO EVENT SHALL THE OpenSSL PROJECT OR
- * ITS CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
- * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
- * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
- * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
- * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
- * STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
- * ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED
- * OF THE POSSIBILITY OF SUCH DAMAGE.
- * ====================================================================
- *
- * This product includes cryptographic software written by Eric Young
- * (eay@cryptsoft.com).  This product includes software written by Tim
- * Hudson (tjh@cryptsoft.com).
- *
- */
-
-#include <stdio.h>
-#include <ctype.h>
-#include <openssl/crypto.h>
-#include "cryptlib.h"
-#include <openssl/conf.h>
-#include <openssl/dso.h>
-#include <openssl/x509.h>
-
-/* Simple ASN1 OID module: add all objects in a given section */
-
-static int do_create(char *value, char *name);
-
-static int oid_module_init(CONF_IMODULE *md, const CONF *cnf)
-	{
-	int i;
-	const char *oid_section;
-	STACK_OF(CONF_VALUE) *sktmp;
-	CONF_VALUE *oval;
-	oid_section = CONF_imodule_get_value(md);
-	if(!(sktmp = NCONF_get_section(cnf, oid_section)))
-		{
-		ASN1err(ASN1_F_OID_MODULE_INIT, ASN1_R_ERROR_LOADING_SECTION);
-		return 0;
-		}
-	for(i = 0; i < sk_CONF_VALUE_num(sktmp); i++)
-		{
-		oval = sk_CONF_VALUE_value(sktmp, i);
-		if(!do_create(oval->value, oval->name))
-			{
-			ASN1err(ASN1_F_OID_MODULE_INIT, ASN1_R_ADDING_OBJECT);
-			return 0;
-			}
-		}
-	return 1;
-	}
-
-static void oid_module_finish(CONF_IMODULE *md)
-	{
-	OBJ_cleanup();
-	}
-
-void ASN1_add_oid_module(void)
-	{
-	CONF_module_add("oid_section", oid_module_init, oid_module_finish);
-	}
-
-/* Create an OID based on a name value pair. Accept two formats.
- * shortname = 1.2.3.4
- * shortname = some long name, 1.2.3.4
- */
-
-
-static int do_create(char *value, char *name)
-	{
-	int nid;
-	ASN1_OBJECT *oid;
-	char *ln, *ostr, *p, *lntmp;
-	p = strrchr(value, ',');
-	if (!p)
-		{
-		ln = name;
-		ostr = value;
-		}
-	else
-		{
-		ln = NULL;
-		ostr = p + 1;
-		if (!*ostr)
-			return 0;
-		while(isspace((unsigned char)*ostr)) ostr++;
-		}
-
-	nid = OBJ_create(ostr, name, ln);
-
-	if (nid == NID_undef)
-		return 0;
-
-	if (p)
-		{
-		ln = value;
-		while(isspace((unsigned char)*ln)) ln++;
-		p--;
-		while(isspace((unsigned char)*p))
-			{
-			if (p == ln)
-				return 0;
-			p--;
-			}
-		p++;
-		lntmp = OPENSSL_malloc((p - ln) + 1);
-		if (lntmp == NULL)
-			return 0;
-		memcpy(lntmp, ln, p - ln);
-		lntmp[p - ln + 1] = 0;
-		oid = OBJ_nid2obj(nid);
-		oid->ln = lntmp;
-		}
-
-	return 1;
-	}
-		
-		
diff --git a/crypto/openssl/crypto/asn1/asn_pack.c b/crypto/openssl/crypto/asn1/asn_pack.c
deleted file mode 100644
index e8b671b7b51b..000000000000
--- a/crypto/openssl/crypto/asn1/asn_pack.c
+++ /dev/null
@@ -1,191 +0,0 @@
-/* asn_pack.c */
-/* Written by Dr Stephen N Henson (shenson@bigfoot.com) for the OpenSSL
- * project 1999.
- */
-/* ====================================================================
- * Copyright (c) 1999 The OpenSSL Project.  All rights reserved.
- *
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions
- * are met:
- *
- * 1. Redistributions of source code must retain the above copyright
- *    notice, this list of conditions and the following disclaimer. 
- *
- * 2. Redistributions in binary form must reproduce the above copyright
- *    notice, this list of conditions and the following disclaimer in
- *    the documentation and/or other materials provided with the
- *    distribution.
- *
- * 3. All advertising materials mentioning features or use of this
- *    software must display the following acknowledgment:
- *    "This product includes software developed by the OpenSSL Project
- *    for use in the OpenSSL Toolkit. (http://www.OpenSSL.org/)"
- *
- * 4. The names "OpenSSL Toolkit" and "OpenSSL Project" must not be used to
- *    endorse or promote products derived from this software without
- *    prior written permission. For written permission, please contact
- *    licensing@OpenSSL.org.
- *
- * 5. Products derived from this software may not be called "OpenSSL"
- *    nor may "OpenSSL" appear in their names without prior written
- *    permission of the OpenSSL Project.
- *
- * 6. Redistributions of any form whatsoever must retain the following
- *    acknowledgment:
- *    "This product includes software developed by the OpenSSL Project
- *    for use in the OpenSSL Toolkit (http://www.OpenSSL.org/)"
- *
- * THIS SOFTWARE IS PROVIDED BY THE OpenSSL PROJECT ``AS IS'' AND ANY
- * EXPRESSED OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
- * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR
- * PURPOSE ARE DISCLAIMED.  IN NO EVENT SHALL THE OpenSSL PROJECT OR
- * ITS CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
- * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
- * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
- * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
- * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
- * STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
- * ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED
- * OF THE POSSIBILITY OF SUCH DAMAGE.
- * ====================================================================
- *
- * This product includes cryptographic software written by Eric Young
- * (eay@cryptsoft.com).  This product includes software written by Tim
- * Hudson (tjh@cryptsoft.com).
- *
- */
-
-#include <stdio.h>
-#include "cryptlib.h"
-#include <openssl/asn1.h>
-
-#ifndef NO_ASN1_OLD
-
-/* ASN1 packing and unpacking functions */
-
-/* Turn an ASN1 encoded SEQUENCE OF into a STACK of structures */
-
-STACK *ASN1_seq_unpack(const unsigned char *buf, int len,
-		       d2i_of_void *d2i,void (*free_func)(void *))
-{
-    STACK *sk;
-    const unsigned char *pbuf;
-    pbuf =  buf;
-    if (!(sk = d2i_ASN1_SET(NULL, &pbuf, len, d2i, free_func,
-					V_ASN1_SEQUENCE, V_ASN1_UNIVERSAL)))
-		 ASN1err(ASN1_F_ASN1_SEQ_UNPACK,ASN1_R_DECODE_ERROR);
-    return sk;
-}
-
-/* Turn a STACK structures into an ASN1 encoded SEQUENCE OF structure in a
- * OPENSSL_malloc'ed buffer
- */
-
-unsigned char *ASN1_seq_pack(STACK *safes, i2d_of_void *i2d,
-			     unsigned char **buf, int *len)
-{
-	int safelen;
-	unsigned char *safe, *p;
-	if (!(safelen = i2d_ASN1_SET(safes, NULL, i2d, V_ASN1_SEQUENCE,
-					      V_ASN1_UNIVERSAL, IS_SEQUENCE))) {
-		ASN1err(ASN1_F_ASN1_SEQ_PACK,ASN1_R_ENCODE_ERROR);
-		return NULL;
-	}
-	if (!(safe = OPENSSL_malloc (safelen))) {
-		ASN1err(ASN1_F_ASN1_SEQ_PACK,ERR_R_MALLOC_FAILURE);
-		return NULL;
-	}
-	p = safe;
-	i2d_ASN1_SET(safes, &p, i2d, V_ASN1_SEQUENCE, V_ASN1_UNIVERSAL,
-								 IS_SEQUENCE);
-	if (len) *len = safelen;
-	if (buf) *buf = safe;
-	return safe;
-}
-
-/* Extract an ASN1 object from an ASN1_STRING */
-
-void *ASN1_unpack_string(ASN1_STRING *oct, d2i_of_void *d2i)
-{
-	const unsigned char *p;
-	char *ret;
-
-	p = oct->data;
-	if(!(ret = d2i(NULL, &p, oct->length)))
-		ASN1err(ASN1_F_ASN1_UNPACK_STRING,ASN1_R_DECODE_ERROR);
-	return ret;
-}
-
-/* Pack an ASN1 object into an ASN1_STRING */
-
-ASN1_STRING *ASN1_pack_string(void *obj, i2d_of_void *i2d, ASN1_STRING **oct)
-{
-	unsigned char *p;
-	ASN1_STRING *octmp;
-
-	if (!oct || !*oct) {
-		if (!(octmp = ASN1_STRING_new ())) {
-			ASN1err(ASN1_F_ASN1_PACK_STRING,ERR_R_MALLOC_FAILURE);
-			return NULL;
-		}
-		if (oct) *oct = octmp;
-	} else octmp = *oct;
-		
-	if (!(octmp->length = i2d(obj, NULL))) {
-		ASN1err(ASN1_F_ASN1_PACK_STRING,ASN1_R_ENCODE_ERROR);
-		return NULL;
-	}
-	if (!(p = OPENSSL_malloc (octmp->length))) {
-		ASN1err(ASN1_F_ASN1_PACK_STRING,ERR_R_MALLOC_FAILURE);
-		return NULL;
-	}
-	octmp->data = p;
-	i2d (obj, &p);
-	return octmp;
-}
-
-#endif
-
-/* ASN1_ITEM versions of the above */
-
-ASN1_STRING *ASN1_item_pack(void *obj, const ASN1_ITEM *it, ASN1_STRING **oct)
-{
-	ASN1_STRING *octmp;
-
-	if (!oct || !*oct) {
-		if (!(octmp = ASN1_STRING_new ())) {
-			ASN1err(ASN1_F_ASN1_ITEM_PACK,ERR_R_MALLOC_FAILURE);
-			return NULL;
-		}
-		if (oct) *oct = octmp;
-	} else octmp = *oct;
-
-	if(octmp->data) {
-		OPENSSL_free(octmp->data);
-		octmp->data = NULL;
-	}
-		
-	if (!(octmp->length = ASN1_item_i2d(obj, &octmp->data, it))) {
-		ASN1err(ASN1_F_ASN1_ITEM_PACK,ASN1_R_ENCODE_ERROR);
-		return NULL;
-	}
-	if (!octmp->data) {
-		ASN1err(ASN1_F_ASN1_ITEM_PACK,ERR_R_MALLOC_FAILURE);
-		return NULL;
-	}
-	return octmp;
-}
-
-/* Extract an ASN1 object from an ASN1_STRING */
-
-void *ASN1_item_unpack(ASN1_STRING *oct, const ASN1_ITEM *it)
-{
-	const unsigned char *p;
-	void *ret;
-
-	p = oct->data;
-	if(!(ret = ASN1_item_d2i(NULL, &p, oct->length, it)))
-		ASN1err(ASN1_F_ASN1_ITEM_UNPACK,ASN1_R_DECODE_ERROR);
-	return ret;
-}
diff --git a/crypto/openssl/crypto/asn1/charmap.h b/crypto/openssl/crypto/asn1/charmap.h
deleted file mode 100644
index bd020a9562fd..000000000000
--- a/crypto/openssl/crypto/asn1/charmap.h
+++ /dev/null
@@ -1,15 +0,0 @@
-/* Auto generated with chartype.pl script.
- * Mask of various character properties
- */
-
-static unsigned char char_type[] = {
- 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2,
- 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2,
-120, 0, 1,40, 0, 0, 0,16,16,16, 0,25,25,16,16,16,
-16,16,16,16,16,16,16,16,16,16,16, 9, 9,16, 9,16,
- 0,16,16,16,16,16,16,16,16,16,16,16,16,16,16,16,
-16,16,16,16,16,16,16,16,16,16,16, 0, 1, 0, 0, 0,
- 0,16,16,16,16,16,16,16,16,16,16,16,16,16,16,16,
-16,16,16,16,16,16,16,16,16,16,16, 0, 0, 0, 0, 2
-};
-
diff --git a/crypto/openssl/crypto/asn1/charmap.pl b/crypto/openssl/crypto/asn1/charmap.pl
deleted file mode 100644
index 2875c5986728..000000000000
--- a/crypto/openssl/crypto/asn1/charmap.pl
+++ /dev/null
@@ -1,80 +0,0 @@
-#!/usr/local/bin/perl -w
-
-use strict;
-
-my ($i, @arr);
-
-# Set up an array with the type of ASCII characters
-# Each set bit represents a character property.
-
-# RFC2253 character properties
-my $RFC2253_ESC = 1;	# Character escaped with \
-my $ESC_CTRL	= 2;	# Escaped control character
-# These are used with RFC1779 quoting using "
-my $NOESC_QUOTE	= 8;	# Not escaped if quoted
-my $PSTRING_CHAR = 0x10;	# Valid PrintableString character
-my $RFC2253_FIRST_ESC = 0x20; # Escaped with \ if first character
-my $RFC2253_LAST_ESC = 0x40;  # Escaped with \ if last character
-
-for($i = 0; $i < 128; $i++) {
-	# Set the RFC2253 escape characters (control)
-	$arr[$i] = 0;
-	if(($i < 32) || ($i > 126)) {
-		$arr[$i] |= $ESC_CTRL;
-	}
-
-	# Some PrintableString characters
-	if(		   ( ( $i >= ord("a")) && ( $i <= ord("z")) )
-			|| (  ( $i >= ord("A")) && ( $i <= ord("Z")) )
-			|| (  ( $i >= ord("0")) && ( $i <= ord("9")) )  ) {
-		$arr[$i] |= $PSTRING_CHAR;
-	}
-}
-
-# Now setup the rest
-
-# Remaining RFC2253 escaped characters
-
-$arr[ord(" ")] |= $NOESC_QUOTE | $RFC2253_FIRST_ESC | $RFC2253_LAST_ESC;
-$arr[ord("#")] |= $NOESC_QUOTE | $RFC2253_FIRST_ESC;
-
-$arr[ord(",")] |= $NOESC_QUOTE | $RFC2253_ESC;
-$arr[ord("+")] |= $NOESC_QUOTE | $RFC2253_ESC;
-$arr[ord("\"")] |= $RFC2253_ESC;
-$arr[ord("\\")] |= $RFC2253_ESC;
-$arr[ord("<")] |= $NOESC_QUOTE | $RFC2253_ESC;
-$arr[ord(">")] |= $NOESC_QUOTE | $RFC2253_ESC;
-$arr[ord(";")] |= $NOESC_QUOTE | $RFC2253_ESC;
-
-# Remaining PrintableString characters
-
-$arr[ord(" ")] |= $PSTRING_CHAR;
-$arr[ord("'")] |= $PSTRING_CHAR;
-$arr[ord("(")] |= $PSTRING_CHAR;
-$arr[ord(")")] |= $PSTRING_CHAR;
-$arr[ord("+")] |= $PSTRING_CHAR;
-$arr[ord(",")] |= $PSTRING_CHAR;
-$arr[ord("-")] |= $PSTRING_CHAR;
-$arr[ord(".")] |= $PSTRING_CHAR;
-$arr[ord("/")] |= $PSTRING_CHAR;
-$arr[ord(":")] |= $PSTRING_CHAR;
-$arr[ord("=")] |= $PSTRING_CHAR;
-$arr[ord("?")] |= $PSTRING_CHAR;
-
-# Now generate the C code
-
-print <<EOF;
-/* Auto generated with chartype.pl script.
- * Mask of various character properties
- */
-
-static unsigned char char_type[] = {
-EOF
-
-for($i = 0; $i < 128; $i++) {
-	print("\n") if($i && (($i % 16) == 0));
-	printf("%2d", $arr[$i]);
-	print(",") if ($i != 127);
-}
-print("\n};\n\n");
-
diff --git a/crypto/openssl/crypto/asn1/d2i_pr.c b/crypto/openssl/crypto/asn1/d2i_pr.c
deleted file mode 100644
index 207ccda5ac95..000000000000
--- a/crypto/openssl/crypto/asn1/d2i_pr.c
+++ /dev/null
@@ -1,161 +0,0 @@
-/* crypto/asn1/d2i_pr.c */
-/* Copyright (C) 1995-1998 Eric Young (eay@cryptsoft.com)
- * All rights reserved.
- *
- * This package is an SSL implementation written
- * by Eric Young (eay@cryptsoft.com).
- * The implementation was written so as to conform with Netscapes SSL.
- * 
- * This library is free for commercial and non-commercial use as long as
- * the following conditions are aheared to.  The following conditions
- * apply to all code found in this distribution, be it the RC4, RSA,
- * lhash, DES, etc., code; not just the SSL code.  The SSL documentation
- * included with this distribution is covered by the same copyright terms
- * except that the holder is Tim Hudson (tjh@cryptsoft.com).
- * 
- * Copyright remains Eric Young's, and as such any Copyright notices in
- * the code are not to be removed.
- * If this package is used in a product, Eric Young should be given attribution
- * as the author of the parts of the library used.
- * This can be in the form of a textual message at program startup or
- * in documentation (online or textual) provided with the package.
- * 
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions
- * are met:
- * 1. Redistributions of source code must retain the copyright
- *    notice, this list of conditions and the following disclaimer.
- * 2. Redistributions in binary form must reproduce the above copyright
- *    notice, this list of conditions and the following disclaimer in the
- *    documentation and/or other materials provided with the distribution.
- * 3. All advertising materials mentioning features or use of this software
- *    must display the following acknowledgement:
- *    "This product includes cryptographic software written by
- *     Eric Young (eay@cryptsoft.com)"
- *    The word 'cryptographic' can be left out if the rouines from the library
- *    being used are not cryptographic related :-).
- * 4. If you include any Windows specific code (or a derivative thereof) from 
- *    the apps directory (application code) you must include an acknowledgement:
- *    "This product includes software written by Tim Hudson (tjh@cryptsoft.com)"
- * 
- * THIS SOFTWARE IS PROVIDED BY ERIC YOUNG ``AS IS'' AND
- * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
- * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
- * ARE DISCLAIMED.  IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE
- * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
- * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
- * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
- * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
- * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
- * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
- * SUCH DAMAGE.
- * 
- * The licence and distribution terms for any publically available version or
- * derivative of this code cannot be changed.  i.e. this code cannot simply be
- * copied and put under another distribution licence
- * [including the GNU Public Licence.]
- */
-
-#include <stdio.h>
-#include "cryptlib.h"
-#include <openssl/bn.h>
-#include <openssl/evp.h>
-#include <openssl/objects.h>
-#include <openssl/asn1.h>
-#ifndef OPENSSL_NO_RSA
-#include <openssl/rsa.h>
-#endif
-#ifndef OPENSSL_NO_DSA
-#include <openssl/dsa.h>
-#endif
-#ifndef OPENSSL_NO_EC
-#include <openssl/ec.h>
-#endif
-
-EVP_PKEY *d2i_PrivateKey(int type, EVP_PKEY **a, const unsigned char **pp,
-	     long length)
-	{
-	EVP_PKEY *ret;
-
-	if ((a == NULL) || (*a == NULL))
-		{
-		if ((ret=EVP_PKEY_new()) == NULL)
-			{
-			ASN1err(ASN1_F_D2I_PRIVATEKEY,ERR_R_EVP_LIB);
-			return(NULL);
-			}
-		}
-	else	ret= *a;
-
-	ret->save_type=type;
-	ret->type=EVP_PKEY_type(type);
-	switch (ret->type)
-		{
-#ifndef OPENSSL_NO_RSA
-	case EVP_PKEY_RSA:
-		if ((ret->pkey.rsa=d2i_RSAPrivateKey(NULL,
-			(const unsigned char **)pp,length)) == NULL) /* TMP UGLY CAST */
-			{
-			ASN1err(ASN1_F_D2I_PRIVATEKEY,ERR_R_ASN1_LIB);
-			goto err;
-			}
-		break;
-#endif
-#ifndef OPENSSL_NO_DSA
-	case EVP_PKEY_DSA:
-		if ((ret->pkey.dsa=d2i_DSAPrivateKey(NULL,
-			(const unsigned char **)pp,length)) == NULL) /* TMP UGLY CAST */
-			{
-			ASN1err(ASN1_F_D2I_PRIVATEKEY,ERR_R_ASN1_LIB);
-			goto err;
-			}
-		break;
-#endif
-#ifndef OPENSSL_NO_EC
-	case EVP_PKEY_EC:
-		if ((ret->pkey.ec = d2i_ECPrivateKey(NULL, 
-			(const unsigned char **)pp, length)) == NULL)
-			{
-			ASN1err(ASN1_F_D2I_PRIVATEKEY, ERR_R_ASN1_LIB);
-			goto err;
-			}
-		break;
-#endif
-	default:
-		ASN1err(ASN1_F_D2I_PRIVATEKEY,ASN1_R_UNKNOWN_PUBLIC_KEY_TYPE);
-		goto err;
-		/* break; */
-		}
-	if (a != NULL) (*a)=ret;
-	return(ret);
-err:
-	if ((ret != NULL) && ((a == NULL) || (*a != ret))) EVP_PKEY_free(ret);
-	return(NULL);
-	}
-
-/* This works like d2i_PrivateKey() except it automatically works out the type */
-
-EVP_PKEY *d2i_AutoPrivateKey(EVP_PKEY **a, const unsigned char **pp,
-	     long length)
-{
-	STACK_OF(ASN1_TYPE) *inkey;
-	const unsigned char *p;
-	int keytype;
-	p = *pp;
-	/* Dirty trick: read in the ASN1 data into a STACK_OF(ASN1_TYPE):
-	 * by analyzing it we can determine the passed structure: this
-	 * assumes the input is surrounded by an ASN1 SEQUENCE.
-	 */
-	inkey = d2i_ASN1_SET_OF_ASN1_TYPE(NULL, &p, length, d2i_ASN1_TYPE, 
-			ASN1_TYPE_free, V_ASN1_SEQUENCE, V_ASN1_UNIVERSAL);
-	/* Since we only need to discern "traditional format" RSA and DSA
-	 * keys we can just count the elements.
-         */
-	if(sk_ASN1_TYPE_num(inkey) == 6) 
-		keytype = EVP_PKEY_DSA;
-	else if (sk_ASN1_TYPE_num(inkey) == 4)
-		keytype = EVP_PKEY_EC;
-	else keytype = EVP_PKEY_RSA;
-	sk_ASN1_TYPE_pop_free(inkey, ASN1_TYPE_free);
-	return d2i_PrivateKey(keytype, a, pp, length);
-}
diff --git a/crypto/openssl/crypto/asn1/d2i_pu.c b/crypto/openssl/crypto/asn1/d2i_pu.c
deleted file mode 100644
index 3694f51a8c0a..000000000000
--- a/crypto/openssl/crypto/asn1/d2i_pu.c
+++ /dev/null
@@ -1,135 +0,0 @@
-/* crypto/asn1/d2i_pu.c */
-/* Copyright (C) 1995-1998 Eric Young (eay@cryptsoft.com)
- * All rights reserved.
- *
- * This package is an SSL implementation written
- * by Eric Young (eay@cryptsoft.com).
- * The implementation was written so as to conform with Netscapes SSL.
- * 
- * This library is free for commercial and non-commercial use as long as
- * the following conditions are aheared to.  The following conditions
- * apply to all code found in this distribution, be it the RC4, RSA,
- * lhash, DES, etc., code; not just the SSL code.  The SSL documentation
- * included with this distribution is covered by the same copyright terms
- * except that the holder is Tim Hudson (tjh@cryptsoft.com).
- * 
- * Copyright remains Eric Young's, and as such any Copyright notices in
- * the code are not to be removed.
- * If this package is used in a product, Eric Young should be given attribution
- * as the author of the parts of the library used.
- * This can be in the form of a textual message at program startup or
- * in documentation (online or textual) provided with the package.
- * 
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions
- * are met:
- * 1. Redistributions of source code must retain the copyright
- *    notice, this list of conditions and the following disclaimer.
- * 2. Redistributions in binary form must reproduce the above copyright
- *    notice, this list of conditions and the following disclaimer in the
- *    documentation and/or other materials provided with the distribution.
- * 3. All advertising materials mentioning features or use of this software
- *    must display the following acknowledgement:
- *    "This product includes cryptographic software written by
- *     Eric Young (eay@cryptsoft.com)"
- *    The word 'cryptographic' can be left out if the rouines from the library
- *    being used are not cryptographic related :-).
- * 4. If you include any Windows specific code (or a derivative thereof) from 
- *    the apps directory (application code) you must include an acknowledgement:
- *    "This product includes software written by Tim Hudson (tjh@cryptsoft.com)"
- * 
- * THIS SOFTWARE IS PROVIDED BY ERIC YOUNG ``AS IS'' AND
- * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
- * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
- * ARE DISCLAIMED.  IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE
- * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
- * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
- * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
- * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
- * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
- * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
- * SUCH DAMAGE.
- * 
- * The licence and distribution terms for any publically available version or
- * derivative of this code cannot be changed.  i.e. this code cannot simply be
- * copied and put under another distribution licence
- * [including the GNU Public Licence.]
- */
-
-#include <stdio.h>
-#include "cryptlib.h"
-#include <openssl/bn.h>
-#include <openssl/evp.h>
-#include <openssl/objects.h>
-#include <openssl/asn1.h>
-#ifndef OPENSSL_NO_RSA
-#include <openssl/rsa.h>
-#endif
-#ifndef OPENSSL_NO_DSA
-#include <openssl/dsa.h>
-#endif
-#ifndef OPENSSL_NO_EC
-#include <openssl/ec.h>
-#endif
-
-EVP_PKEY *d2i_PublicKey(int type, EVP_PKEY **a, const unsigned char **pp,
-	     long length)
-	{
-	EVP_PKEY *ret;
-
-	if ((a == NULL) || (*a == NULL))
-		{
-		if ((ret=EVP_PKEY_new()) == NULL)
-			{
-			ASN1err(ASN1_F_D2I_PUBLICKEY,ERR_R_EVP_LIB);
-			return(NULL);
-			}
-		}
-	else	ret= *a;
-
-	ret->save_type=type;
-	ret->type=EVP_PKEY_type(type);
-	switch (ret->type)
-		{
-#ifndef OPENSSL_NO_RSA
-	case EVP_PKEY_RSA:
-		if ((ret->pkey.rsa=d2i_RSAPublicKey(NULL,
-			(const unsigned char **)pp,length)) == NULL) /* TMP UGLY CAST */
-			{
-			ASN1err(ASN1_F_D2I_PUBLICKEY,ERR_R_ASN1_LIB);
-			goto err;
-			}
-		break;
-#endif
-#ifndef OPENSSL_NO_DSA
-	case EVP_PKEY_DSA:
-		if (!d2i_DSAPublicKey(&(ret->pkey.dsa),
-			(const unsigned char **)pp,length)) /* TMP UGLY CAST */
-			{
-			ASN1err(ASN1_F_D2I_PUBLICKEY,ERR_R_ASN1_LIB);
-			goto err;
-			}
-		break;
-#endif
-#ifndef OPENSSL_NO_EC
-	case EVP_PKEY_EC:
-		if (!o2i_ECPublicKey(&(ret->pkey.ec),
-				     (const unsigned char **)pp, length))
-			{
-			ASN1err(ASN1_F_D2I_PUBLICKEY, ERR_R_ASN1_LIB);
-			goto err;
-			}
-	break;
-#endif
-	default:
-		ASN1err(ASN1_F_D2I_PUBLICKEY,ASN1_R_UNKNOWN_PUBLIC_KEY_TYPE);
-		goto err;
-		/* break; */
-		}
-	if (a != NULL) (*a)=ret;
-	return(ret);
-err:
-	if ((ret != NULL) && ((a == NULL) || (*a != ret))) EVP_PKEY_free(ret);
-	return(NULL);
-	}
-
diff --git a/crypto/openssl/crypto/asn1/evp_asn1.c b/crypto/openssl/crypto/asn1/evp_asn1.c
deleted file mode 100644
index f3d9804860ec..000000000000
--- a/crypto/openssl/crypto/asn1/evp_asn1.c
+++ /dev/null
@@ -1,189 +0,0 @@
-/* crypto/asn1/evp_asn1.c */
-/* Copyright (C) 1995-1998 Eric Young (eay@cryptsoft.com)
- * All rights reserved.
- *
- * This package is an SSL implementation written
- * by Eric Young (eay@cryptsoft.com).
- * The implementation was written so as to conform with Netscapes SSL.
- * 
- * This library is free for commercial and non-commercial use as long as
- * the following conditions are aheared to.  The following conditions
- * apply to all code found in this distribution, be it the RC4, RSA,
- * lhash, DES, etc., code; not just the SSL code.  The SSL documentation
- * included with this distribution is covered by the same copyright terms
- * except that the holder is Tim Hudson (tjh@cryptsoft.com).
- * 
- * Copyright remains Eric Young's, and as such any Copyright notices in
- * the code are not to be removed.
- * If this package is used in a product, Eric Young should be given attribution
- * as the author of the parts of the library used.
- * This can be in the form of a textual message at program startup or
- * in documentation (online or textual) provided with the package.
- * 
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions
- * are met:
- * 1. Redistributions of source code must retain the copyright
- *    notice, this list of conditions and the following disclaimer.
- * 2. Redistributions in binary form must reproduce the above copyright
- *    notice, this list of conditions and the following disclaimer in the
- *    documentation and/or other materials provided with the distribution.
- * 3. All advertising materials mentioning features or use of this software
- *    must display the following acknowledgement:
- *    "This product includes cryptographic software written by
- *     Eric Young (eay@cryptsoft.com)"
- *    The word 'cryptographic' can be left out if the rouines from the library
- *    being used are not cryptographic related :-).
- * 4. If you include any Windows specific code (or a derivative thereof) from 
- *    the apps directory (application code) you must include an acknowledgement:
- *    "This product includes software written by Tim Hudson (tjh@cryptsoft.com)"
- * 
- * THIS SOFTWARE IS PROVIDED BY ERIC YOUNG ``AS IS'' AND
- * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
- * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
- * ARE DISCLAIMED.  IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE
- * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
- * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
- * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
- * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
- * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
- * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
- * SUCH DAMAGE.
- * 
- * The licence and distribution terms for any publically available version or
- * derivative of this code cannot be changed.  i.e. this code cannot simply be
- * copied and put under another distribution licence
- * [including the GNU Public Licence.]
- */
-
-#include <stdio.h>
-#include "cryptlib.h"
-#include <openssl/asn1.h>
-#include <openssl/asn1_mac.h>
-
-int ASN1_TYPE_set_octetstring(ASN1_TYPE *a, unsigned char *data, int len)
-	{
-	ASN1_STRING *os;
-
-	if ((os=M_ASN1_OCTET_STRING_new()) == NULL) return(0);
-	if (!M_ASN1_OCTET_STRING_set(os,data,len)) return(0);
-	ASN1_TYPE_set(a,V_ASN1_OCTET_STRING,os);
-	return(1);
-	}
-
-/* int max_len:  for returned value    */
-int ASN1_TYPE_get_octetstring(ASN1_TYPE *a, unsigned char *data,
-	     int max_len)
-	{
-	int ret,num;
-	unsigned char *p;
-
-	if ((a->type != V_ASN1_OCTET_STRING) || (a->value.octet_string == NULL))
-		{
-		ASN1err(ASN1_F_ASN1_TYPE_GET_OCTETSTRING,ASN1_R_DATA_IS_WRONG);
-		return(-1);
-		}
-	p=M_ASN1_STRING_data(a->value.octet_string);
-	ret=M_ASN1_STRING_length(a->value.octet_string);
-	if (ret < max_len)
-		num=ret;
-	else
-		num=max_len;
-	memcpy(data,p,num);
-	return(ret);
-	}
-
-int ASN1_TYPE_set_int_octetstring(ASN1_TYPE *a, long num, unsigned char *data,
-	     int len)
-	{
-	int n,size;
-	ASN1_OCTET_STRING os,*osp;
-	ASN1_INTEGER in;
-	unsigned char *p;
-	unsigned char buf[32]; /* when they have 256bit longs, 
-				* I'll be in trouble */
-	in.data=buf;
-	in.length=32;
-	os.data=data;
-	os.type=V_ASN1_OCTET_STRING;
-	os.length=len;
-	ASN1_INTEGER_set(&in,num);
-	n =  i2d_ASN1_INTEGER(&in,NULL);
-	n+=M_i2d_ASN1_OCTET_STRING(&os,NULL);
-
-	size=ASN1_object_size(1,n,V_ASN1_SEQUENCE);
-
-	if ((osp=ASN1_STRING_new()) == NULL) return(0);
-	/* Grow the 'string' */
-	if (!ASN1_STRING_set(osp,NULL,size))
-		{
-		ASN1_STRING_free(osp);
-		return(0);
-		}
-
-	M_ASN1_STRING_length_set(osp, size);
-	p=M_ASN1_STRING_data(osp);
-
-	ASN1_put_object(&p,1,n,V_ASN1_SEQUENCE,V_ASN1_UNIVERSAL);
-	  i2d_ASN1_INTEGER(&in,&p);
-	M_i2d_ASN1_OCTET_STRING(&os,&p);
-
-	ASN1_TYPE_set(a,V_ASN1_SEQUENCE,osp);
-	return(1);
-	}
-
-/* we return the actual length..., num may be missing, in which
- * case, set it to zero */
-/* int max_len:  for returned value    */
-int ASN1_TYPE_get_int_octetstring(ASN1_TYPE *a, long *num, unsigned char *data,
-	     int max_len)
-	{
-	int ret= -1,n;
-	ASN1_INTEGER *ai=NULL;
-	ASN1_OCTET_STRING *os=NULL;
-	const unsigned char *p;
-	long length;
-	ASN1_const_CTX c;
-
-	if ((a->type != V_ASN1_SEQUENCE) || (a->value.sequence == NULL))
-		{
-		goto err;
-		}
-	p=M_ASN1_STRING_data(a->value.sequence);
-	length=M_ASN1_STRING_length(a->value.sequence);
-
-	c.pp= &p;
-	c.p=p;
-	c.max=p+length;
-	c.error=ASN1_R_DATA_IS_WRONG;
-
-	M_ASN1_D2I_start_sequence();
-	c.q=c.p;
-	if ((ai=d2i_ASN1_INTEGER(NULL,&c.p,c.slen)) == NULL) goto err;
-        c.slen-=(c.p-c.q);
-	c.q=c.p;
-	if ((os=d2i_ASN1_OCTET_STRING(NULL,&c.p,c.slen)) == NULL) goto err;
-        c.slen-=(c.p-c.q);
-	if (!M_ASN1_D2I_end_sequence()) goto err;
-
-	if (num != NULL)
-		*num=ASN1_INTEGER_get(ai);
-
-	ret=M_ASN1_STRING_length(os);
-	if (max_len > ret)
-		n=ret;
-	else
-		n=max_len;
-
-	if (data != NULL)
-		memcpy(data,M_ASN1_STRING_data(os),n);
-	if (0)
-		{
-err:
-		ASN1err(ASN1_F_ASN1_TYPE_GET_INT_OCTETSTRING,ASN1_R_DATA_IS_WRONG);
-		}
-	if (os != NULL) M_ASN1_OCTET_STRING_free(os);
-	if (ai != NULL) M_ASN1_INTEGER_free(ai);
-	return(ret);
-	}
-
diff --git a/crypto/openssl/crypto/asn1/f_enum.c b/crypto/openssl/crypto/asn1/f_enum.c
deleted file mode 100644
index 56e3cc8df2b7..000000000000
--- a/crypto/openssl/crypto/asn1/f_enum.c
+++ /dev/null
@@ -1,207 +0,0 @@
-/* crypto/asn1/f_enum.c */
-/* Copyright (C) 1995-1998 Eric Young (eay@cryptsoft.com)
- * All rights reserved.
- *
- * This package is an SSL implementation written
- * by Eric Young (eay@cryptsoft.com).
- * The implementation was written so as to conform with Netscapes SSL.
- * 
- * This library is free for commercial and non-commercial use as long as
- * the following conditions are aheared to.  The following conditions
- * apply to all code found in this distribution, be it the RC4, RSA,
- * lhash, DES, etc., code; not just the SSL code.  The SSL documentation
- * included with this distribution is covered by the same copyright terms
- * except that the holder is Tim Hudson (tjh@cryptsoft.com).
- * 
- * Copyright remains Eric Young's, and as such any Copyright notices in
- * the code are not to be removed.
- * If this package is used in a product, Eric Young should be given attribution
- * as the author of the parts of the library used.
- * This can be in the form of a textual message at program startup or
- * in documentation (online or textual) provided with the package.
- * 
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions
- * are met:
- * 1. Redistributions of source code must retain the copyright
- *    notice, this list of conditions and the following disclaimer.
- * 2. Redistributions in binary form must reproduce the above copyright
- *    notice, this list of conditions and the following disclaimer in the
- *    documentation and/or other materials provided with the distribution.
- * 3. All advertising materials mentioning features or use of this software
- *    must display the following acknowledgement:
- *    "This product includes cryptographic software written by
- *     Eric Young (eay@cryptsoft.com)"
- *    The word 'cryptographic' can be left out if the rouines from the library
- *    being used are not cryptographic related :-).
- * 4. If you include any Windows specific code (or a derivative thereof) from 
- *    the apps directory (application code) you must include an acknowledgement:
- *    "This product includes software written by Tim Hudson (tjh@cryptsoft.com)"
- * 
- * THIS SOFTWARE IS PROVIDED BY ERIC YOUNG ``AS IS'' AND
- * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
- * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
- * ARE DISCLAIMED.  IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE
- * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
- * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
- * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
- * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
- * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
- * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
- * SUCH DAMAGE.
- * 
- * The licence and distribution terms for any publically available version or
- * derivative of this code cannot be changed.  i.e. this code cannot simply be
- * copied and put under another distribution licence
- * [including the GNU Public Licence.]
- */
-
-#include <stdio.h>
-#include "cryptlib.h"
-#include <openssl/buffer.h>
-#include <openssl/asn1.h>
-
-/* Based on a_int.c: equivalent ENUMERATED functions */
-
-int i2a_ASN1_ENUMERATED(BIO *bp, ASN1_ENUMERATED *a)
-	{
-	int i,n=0;
-	static const char *h="0123456789ABCDEF";
-	char buf[2];
-
-	if (a == NULL) return(0);
-
-	if (a->length == 0)
-		{
-		if (BIO_write(bp,"00",2) != 2) goto err;
-		n=2;
-		}
-	else
-		{
-		for (i=0; i<a->length; i++)
-			{
-			if ((i != 0) && (i%35 == 0))
-				{
-				if (BIO_write(bp,"\\\n",2) != 2) goto err;
-				n+=2;
-				}
-			buf[0]=h[((unsigned char)a->data[i]>>4)&0x0f];
-			buf[1]=h[((unsigned char)a->data[i]   )&0x0f];
-			if (BIO_write(bp,buf,2) != 2) goto err;
-			n+=2;
-			}
-		}
-	return(n);
-err:
-	return(-1);
-	}
-
-int a2i_ASN1_ENUMERATED(BIO *bp, ASN1_ENUMERATED *bs, char *buf, int size)
-	{
-	int ret=0;
-	int i,j,k,m,n,again,bufsize;
-	unsigned char *s=NULL,*sp;
-	unsigned char *bufp;
-	int num=0,slen=0,first=1;
-
-	bs->type=V_ASN1_ENUMERATED;
-
-	bufsize=BIO_gets(bp,buf,size);
-	for (;;)
-		{
-		if (bufsize < 1) goto err_sl;
-		i=bufsize;
-		if (buf[i-1] == '\n') buf[--i]='\0';
-		if (i == 0) goto err_sl;
-		if (buf[i-1] == '\r') buf[--i]='\0';
-		if (i == 0) goto err_sl;
-		again=(buf[i-1] == '\\');
-
-		for (j=0; j<i; j++)
-			{
-			if (!(	((buf[j] >= '0') && (buf[j] <= '9')) ||
-				((buf[j] >= 'a') && (buf[j] <= 'f')) ||
-				((buf[j] >= 'A') && (buf[j] <= 'F'))))
-				{
-				i=j;
-				break;
-				}
-			}
-		buf[i]='\0';
-		/* We have now cleared all the crap off the end of the
-		 * line */
-		if (i < 2) goto err_sl;
-
-		bufp=(unsigned char *)buf;
-		if (first)
-			{
-			first=0;
-			if ((bufp[0] == '0') && (buf[1] == '0'))
-				{
-				bufp+=2;
-				i-=2;
-				}
-			}
-		k=0;
-		i-=again;
-		if (i%2 != 0)
-			{
-			ASN1err(ASN1_F_A2I_ASN1_ENUMERATED,ASN1_R_ODD_NUMBER_OF_CHARS);
-			goto err;
-			}
-		i/=2;
-		if (num+i > slen)
-			{
-			if (s == NULL)
-				sp=(unsigned char *)OPENSSL_malloc(
-					(unsigned int)num+i*2);
-			else
-				sp=(unsigned char *)OPENSSL_realloc(s,
-					(unsigned int)num+i*2);
-			if (sp == NULL)
-				{
-				ASN1err(ASN1_F_A2I_ASN1_ENUMERATED,ERR_R_MALLOC_FAILURE);
-				if (s != NULL) OPENSSL_free(s);
-				goto err;
-				}
-			s=sp;
-			slen=num+i*2;
-			}
-		for (j=0; j<i; j++,k+=2)
-			{
-			for (n=0; n<2; n++)
-				{
-				m=bufp[k+n];
-				if ((m >= '0') && (m <= '9'))
-					m-='0';
-				else if ((m >= 'a') && (m <= 'f'))
-					m=m-'a'+10;
-				else if ((m >= 'A') && (m <= 'F'))
-					m=m-'A'+10;
-				else
-					{
-					ASN1err(ASN1_F_A2I_ASN1_ENUMERATED,ASN1_R_NON_HEX_CHARACTERS);
-					goto err;
-					}
-				s[num+j]<<=4;
-				s[num+j]|=m;
-				}
-			}
-		num+=i;
-		if (again)
-			bufsize=BIO_gets(bp,buf,size);
-		else
-			break;
-		}
-	bs->length=num;
-	bs->data=s;
-	ret=1;
-err:
-	if (0)
-		{
-err_sl:
-		ASN1err(ASN1_F_A2I_ASN1_ENUMERATED,ASN1_R_SHORT_LINE);
-		}
-	return(ret);
-	}
-
diff --git a/crypto/openssl/crypto/asn1/f_int.c b/crypto/openssl/crypto/asn1/f_int.c
deleted file mode 100644
index 9494e597abc3..000000000000
--- a/crypto/openssl/crypto/asn1/f_int.c
+++ /dev/null
@@ -1,219 +0,0 @@
-/* crypto/asn1/f_int.c */
-/* Copyright (C) 1995-1998 Eric Young (eay@cryptsoft.com)
- * All rights reserved.
- *
- * This package is an SSL implementation written
- * by Eric Young (eay@cryptsoft.com).
- * The implementation was written so as to conform with Netscapes SSL.
- * 
- * This library is free for commercial and non-commercial use as long as
- * the following conditions are aheared to.  The following conditions
- * apply to all code found in this distribution, be it the RC4, RSA,
- * lhash, DES, etc., code; not just the SSL code.  The SSL documentation
- * included with this distribution is covered by the same copyright terms
- * except that the holder is Tim Hudson (tjh@cryptsoft.com).
- * 
- * Copyright remains Eric Young's, and as such any Copyright notices in
- * the code are not to be removed.
- * If this package is used in a product, Eric Young should be given attribution
- * as the author of the parts of the library used.
- * This can be in the form of a textual message at program startup or
- * in documentation (online or textual) provided with the package.
- * 
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions
- * are met:
- * 1. Redistributions of source code must retain the copyright
- *    notice, this list of conditions and the following disclaimer.
- * 2. Redistributions in binary form must reproduce the above copyright
- *    notice, this list of conditions and the following disclaimer in the
- *    documentation and/or other materials provided with the distribution.
- * 3. All advertising materials mentioning features or use of this software
- *    must display the following acknowledgement:
- *    "This product includes cryptographic software written by
- *     Eric Young (eay@cryptsoft.com)"
- *    The word 'cryptographic' can be left out if the rouines from the library
- *    being used are not cryptographic related :-).
- * 4. If you include any Windows specific code (or a derivative thereof) from 
- *    the apps directory (application code) you must include an acknowledgement:
- *    "This product includes software written by Tim Hudson (tjh@cryptsoft.com)"
- * 
- * THIS SOFTWARE IS PROVIDED BY ERIC YOUNG ``AS IS'' AND
- * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
- * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
- * ARE DISCLAIMED.  IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE
- * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
- * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
- * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
- * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
- * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
- * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
- * SUCH DAMAGE.
- * 
- * The licence and distribution terms for any publically available version or
- * derivative of this code cannot be changed.  i.e. this code cannot simply be
- * copied and put under another distribution licence
- * [including the GNU Public Licence.]
- */
-
-#include <stdio.h>
-#include "cryptlib.h"
-#include <openssl/buffer.h>
-#include <openssl/asn1.h>
-
-int i2a_ASN1_INTEGER(BIO *bp, ASN1_INTEGER *a)
-	{
-	int i,n=0;
-	static const char *h="0123456789ABCDEF";
-	char buf[2];
-
-	if (a == NULL) return(0);
-
-	if (a->type & V_ASN1_NEG)
-		{
-		if (BIO_write(bp, "-", 1) != 1) goto err;
-		n = 1;
-		}
-
-	if (a->length == 0)
-		{
-		if (BIO_write(bp,"00",2) != 2) goto err;
-		n += 2;
-		}
-	else
-		{
-		for (i=0; i<a->length; i++)
-			{
-			if ((i != 0) && (i%35 == 0))
-				{
-				if (BIO_write(bp,"\\\n",2) != 2) goto err;
-				n+=2;
-				}
-			buf[0]=h[((unsigned char)a->data[i]>>4)&0x0f];
-			buf[1]=h[((unsigned char)a->data[i]   )&0x0f];
-			if (BIO_write(bp,buf,2) != 2) goto err;
-			n+=2;
-			}
-		}
-	return(n);
-err:
-	return(-1);
-	}
-
-int a2i_ASN1_INTEGER(BIO *bp, ASN1_INTEGER *bs, char *buf, int size)
-	{
-	int ret=0;
-	int i,j,k,m,n,again,bufsize;
-	unsigned char *s=NULL,*sp;
-	unsigned char *bufp;
-	int num=0,slen=0,first=1;
-
-	bs->type=V_ASN1_INTEGER;
-
-	bufsize=BIO_gets(bp,buf,size);
-	for (;;)
-		{
-		if (bufsize < 1) goto err_sl;
-		i=bufsize;
-		if (buf[i-1] == '\n') buf[--i]='\0';
-		if (i == 0) goto err_sl;
-		if (buf[i-1] == '\r') buf[--i]='\0';
-		if (i == 0) goto err_sl;
-		again=(buf[i-1] == '\\');
-
-		for (j=0; j<i; j++)
-			{
-#ifndef CHARSET_EBCDIC
-			if (!(	((buf[j] >= '0') && (buf[j] <= '9')) ||
-				((buf[j] >= 'a') && (buf[j] <= 'f')) ||
-				((buf[j] >= 'A') && (buf[j] <= 'F'))))
-#else
-			/* This #ifdef is not strictly necessary, since
-			 * the characters A...F a...f 0...9 are contiguous
-			 * (yes, even in EBCDIC - but not the whole alphabet).
-			 * Nevertheless, isxdigit() is faster.
-			 */
-			if (!isxdigit(buf[j]))
-#endif
-				{
-				i=j;
-				break;
-				}
-			}
-		buf[i]='\0';
-		/* We have now cleared all the crap off the end of the
-		 * line */
-		if (i < 2) goto err_sl;
-
-		bufp=(unsigned char *)buf;
-		if (first)
-			{
-			first=0;
-			if ((bufp[0] == '0') && (buf[1] == '0'))
-				{
-				bufp+=2;
-				i-=2;
-				}
-			}
-		k=0;
-		i-=again;
-		if (i%2 != 0)
-			{
-			ASN1err(ASN1_F_A2I_ASN1_INTEGER,ASN1_R_ODD_NUMBER_OF_CHARS);
-			goto err;
-			}
-		i/=2;
-		if (num+i > slen)
-			{
-			if (s == NULL)
-				sp=(unsigned char *)OPENSSL_malloc(
-					(unsigned int)num+i*2);
-			else
-				sp=OPENSSL_realloc_clean(s,slen,num+i*2);
-			if (sp == NULL)
-				{
-				ASN1err(ASN1_F_A2I_ASN1_INTEGER,ERR_R_MALLOC_FAILURE);
-				if (s != NULL) OPENSSL_free(s);
-				goto err;
-				}
-			s=sp;
-			slen=num+i*2;
-			}
-		for (j=0; j<i; j++,k+=2)
-			{
-			for (n=0; n<2; n++)
-				{
-				m=bufp[k+n];
-				if ((m >= '0') && (m <= '9'))
-					m-='0';
-				else if ((m >= 'a') && (m <= 'f'))
-					m=m-'a'+10;
-				else if ((m >= 'A') && (m <= 'F'))
-					m=m-'A'+10;
-				else
-					{
-					ASN1err(ASN1_F_A2I_ASN1_INTEGER,ASN1_R_NON_HEX_CHARACTERS);
-					goto err;
-					}
-				s[num+j]<<=4;
-				s[num+j]|=m;
-				}
-			}
-		num+=i;
-		if (again)
-			bufsize=BIO_gets(bp,buf,size);
-		else
-			break;
-		}
-	bs->length=num;
-	bs->data=s;
-	ret=1;
-err:
-	if (0)
-		{
-err_sl:
-		ASN1err(ASN1_F_A2I_ASN1_INTEGER,ASN1_R_SHORT_LINE);
-		}
-	return(ret);
-	}
-
diff --git a/crypto/openssl/crypto/asn1/f_string.c b/crypto/openssl/crypto/asn1/f_string.c
deleted file mode 100644
index 968698a79887..000000000000
--- a/crypto/openssl/crypto/asn1/f_string.c
+++ /dev/null
@@ -1,212 +0,0 @@
-/* crypto/asn1/f_string.c */
-/* Copyright (C) 1995-1998 Eric Young (eay@cryptsoft.com)
- * All rights reserved.
- *
- * This package is an SSL implementation written
- * by Eric Young (eay@cryptsoft.com).
- * The implementation was written so as to conform with Netscapes SSL.
- * 
- * This library is free for commercial and non-commercial use as long as
- * the following conditions are aheared to.  The following conditions
- * apply to all code found in this distribution, be it the RC4, RSA,
- * lhash, DES, etc., code; not just the SSL code.  The SSL documentation
- * included with this distribution is covered by the same copyright terms
- * except that the holder is Tim Hudson (tjh@cryptsoft.com).
- * 
- * Copyright remains Eric Young's, and as such any Copyright notices in
- * the code are not to be removed.
- * If this package is used in a product, Eric Young should be given attribution
- * as the author of the parts of the library used.
- * This can be in the form of a textual message at program startup or
- * in documentation (online or textual) provided with the package.
- * 
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions
- * are met:
- * 1. Redistributions of source code must retain the copyright
- *    notice, this list of conditions and the following disclaimer.
- * 2. Redistributions in binary form must reproduce the above copyright
- *    notice, this list of conditions and the following disclaimer in the
- *    documentation and/or other materials provided with the distribution.
- * 3. All advertising materials mentioning features or use of this software
- *    must display the following acknowledgement:
- *    "This product includes cryptographic software written by
- *     Eric Young (eay@cryptsoft.com)"
- *    The word 'cryptographic' can be left out if the rouines from the library
- *    being used are not cryptographic related :-).
- * 4. If you include any Windows specific code (or a derivative thereof) from 
- *    the apps directory (application code) you must include an acknowledgement:
- *    "This product includes software written by Tim Hudson (tjh@cryptsoft.com)"
- * 
- * THIS SOFTWARE IS PROVIDED BY ERIC YOUNG ``AS IS'' AND
- * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
- * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
- * ARE DISCLAIMED.  IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE
- * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
- * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
- * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
- * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
- * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
- * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
- * SUCH DAMAGE.
- * 
- * The licence and distribution terms for any publically available version or
- * derivative of this code cannot be changed.  i.e. this code cannot simply be
- * copied and put under another distribution licence
- * [including the GNU Public Licence.]
- */
-
-#include <stdio.h>
-#include "cryptlib.h"
-#include <openssl/buffer.h>
-#include <openssl/asn1.h>
-
-int i2a_ASN1_STRING(BIO *bp, ASN1_STRING *a, int type)
-	{
-	int i,n=0;
-	static const char *h="0123456789ABCDEF";
-	char buf[2];
-
-	if (a == NULL) return(0);
-
-	if (a->length == 0)
-		{
-		if (BIO_write(bp,"0",1) != 1) goto err;
-		n=1;
-		}
-	else
-		{
-		for (i=0; i<a->length; i++)
-			{
-			if ((i != 0) && (i%35 == 0))
-				{
-				if (BIO_write(bp,"\\\n",2) != 2) goto err;
-				n+=2;
-				}
-			buf[0]=h[((unsigned char)a->data[i]>>4)&0x0f];
-			buf[1]=h[((unsigned char)a->data[i]   )&0x0f];
-			if (BIO_write(bp,buf,2) != 2) goto err;
-			n+=2;
-			}
-		}
-	return(n);
-err:
-	return(-1);
-	}
-
-int a2i_ASN1_STRING(BIO *bp, ASN1_STRING *bs, char *buf, int size)
-	{
-	int ret=0;
-	int i,j,k,m,n,again,bufsize;
-	unsigned char *s=NULL,*sp;
-	unsigned char *bufp;
-	int num=0,slen=0,first=1;
-
-	bufsize=BIO_gets(bp,buf,size);
-	for (;;)
-		{
-		if (bufsize < 1)
-			{
-			if (first)
-				break;
-			else
-				goto err_sl;
-			}
-		first=0;
-
-		i=bufsize;
-		if (buf[i-1] == '\n') buf[--i]='\0';
-		if (i == 0) goto err_sl;
-		if (buf[i-1] == '\r') buf[--i]='\0';
-		if (i == 0) goto err_sl;
-		again=(buf[i-1] == '\\');
-
-		for (j=i-1; j>0; j--)
-			{
-#ifndef CHARSET_EBCDIC
-			if (!(	((buf[j] >= '0') && (buf[j] <= '9')) ||
-				((buf[j] >= 'a') && (buf[j] <= 'f')) ||
-				((buf[j] >= 'A') && (buf[j] <= 'F'))))
-#else
-			/* This #ifdef is not strictly necessary, since
-			 * the characters A...F a...f 0...9 are contiguous
-			 * (yes, even in EBCDIC - but not the whole alphabet).
-			 * Nevertheless, isxdigit() is faster.
-			 */
-			if (!isxdigit(buf[j]))
-#endif
-				{
-				i=j;
-				break;
-				}
-			}
-		buf[i]='\0';
-		/* We have now cleared all the crap off the end of the
-		 * line */
-		if (i < 2) goto err_sl;
-
-		bufp=(unsigned char *)buf;
-
-		k=0;
-		i-=again;
-		if (i%2 != 0)
-			{
-			ASN1err(ASN1_F_A2I_ASN1_STRING,ASN1_R_ODD_NUMBER_OF_CHARS);
-			goto err;
-			}
-		i/=2;
-		if (num+i > slen)
-			{
-			if (s == NULL)
-				sp=(unsigned char *)OPENSSL_malloc(
-					(unsigned int)num+i*2);
-			else
-				sp=(unsigned char *)OPENSSL_realloc(s,
-					(unsigned int)num+i*2);
-			if (sp == NULL)
-				{
-				ASN1err(ASN1_F_A2I_ASN1_STRING,ERR_R_MALLOC_FAILURE);
-				if (s != NULL) OPENSSL_free(s);
-				goto err;
-				}
-			s=sp;
-			slen=num+i*2;
-			}
-		for (j=0; j<i; j++,k+=2)
-			{
-			for (n=0; n<2; n++)
-				{
-				m=bufp[k+n];
-				if ((m >= '0') && (m <= '9'))
-					m-='0';
-				else if ((m >= 'a') && (m <= 'f'))
-					m=m-'a'+10;
-				else if ((m >= 'A') && (m <= 'F'))
-					m=m-'A'+10;
-				else
-					{
-					ASN1err(ASN1_F_A2I_ASN1_STRING,ASN1_R_NON_HEX_CHARACTERS);
-					goto err;
-					}
-				s[num+j]<<=4;
-				s[num+j]|=m;
-				}
-			}
-		num+=i;
-		if (again)
-			bufsize=BIO_gets(bp,buf,size);
-		else
-			break;
-		}
-	bs->length=num;
-	bs->data=s;
-	ret=1;
-err:
-	if (0)
-		{
-err_sl:
-		ASN1err(ASN1_F_A2I_ASN1_STRING,ASN1_R_SHORT_LINE);
-		}
-	return(ret);
-	}
-
diff --git a/crypto/openssl/crypto/asn1/i2d_pr.c b/crypto/openssl/crypto/asn1/i2d_pr.c
deleted file mode 100644
index 0be52c5b76ac..000000000000
--- a/crypto/openssl/crypto/asn1/i2d_pr.c
+++ /dev/null
@@ -1,99 +0,0 @@
-/* crypto/asn1/i2d_pr.c */
-/* Copyright (C) 1995-1998 Eric Young (eay@cryptsoft.com)
- * All rights reserved.
- *
- * This package is an SSL implementation written
- * by Eric Young (eay@cryptsoft.com).
- * The implementation was written so as to conform with Netscapes SSL.
- * 
- * This library is free for commercial and non-commercial use as long as
- * the following conditions are aheared to.  The following conditions
- * apply to all code found in this distribution, be it the RC4, RSA,
- * lhash, DES, etc., code; not just the SSL code.  The SSL documentation
- * included with this distribution is covered by the same copyright terms
- * except that the holder is Tim Hudson (tjh@cryptsoft.com).
- * 
- * Copyright remains Eric Young's, and as such any Copyright notices in
- * the code are not to be removed.
- * If this package is used in a product, Eric Young should be given attribution
- * as the author of the parts of the library used.
- * This can be in the form of a textual message at program startup or
- * in documentation (online or textual) provided with the package.
- * 
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions
- * are met:
- * 1. Redistributions of source code must retain the copyright
- *    notice, this list of conditions and the following disclaimer.
- * 2. Redistributions in binary form must reproduce the above copyright
- *    notice, this list of conditions and the following disclaimer in the
- *    documentation and/or other materials provided with the distribution.
- * 3. All advertising materials mentioning features or use of this software
- *    must display the following acknowledgement:
- *    "This product includes cryptographic software written by
- *     Eric Young (eay@cryptsoft.com)"
- *    The word 'cryptographic' can be left out if the rouines from the library
- *    being used are not cryptographic related :-).
- * 4. If you include any Windows specific code (or a derivative thereof) from 
- *    the apps directory (application code) you must include an acknowledgement:
- *    "This product includes software written by Tim Hudson (tjh@cryptsoft.com)"
- * 
- * THIS SOFTWARE IS PROVIDED BY ERIC YOUNG ``AS IS'' AND
- * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
- * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
- * ARE DISCLAIMED.  IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE
- * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
- * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
- * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
- * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
- * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
- * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
- * SUCH DAMAGE.
- * 
- * The licence and distribution terms for any publically available version or
- * derivative of this code cannot be changed.  i.e. this code cannot simply be
- * copied and put under another distribution licence
- * [including the GNU Public Licence.]
- */
-
-#include <stdio.h>
-#include "cryptlib.h"
-#include <openssl/bn.h>
-#include <openssl/evp.h>
-#include <openssl/objects.h>
-#ifndef OPENSSL_NO_RSA
-#include <openssl/rsa.h>
-#endif
-#ifndef OPENSSL_NO_DSA
-#include <openssl/dsa.h>
-#endif
-#ifndef OPENSSL_NO_EC
-#include <openssl/ec.h>
-#endif
-
-int i2d_PrivateKey(EVP_PKEY *a, unsigned char **pp)
-	{
-#ifndef OPENSSL_NO_RSA
-	if (a->type == EVP_PKEY_RSA)
-		{
-		return(i2d_RSAPrivateKey(a->pkey.rsa,pp));
-		}
-	else
-#endif
-#ifndef OPENSSL_NO_DSA
-	if (a->type == EVP_PKEY_DSA)
-		{
-		return(i2d_DSAPrivateKey(a->pkey.dsa,pp));
-		}
-#endif
-#ifndef OPENSSL_NO_EC
-	if (a->type == EVP_PKEY_EC)
-		{
-		return(i2d_ECPrivateKey(a->pkey.ec, pp));
-		}
-#endif
-
-	ASN1err(ASN1_F_I2D_PRIVATEKEY,ASN1_R_UNSUPPORTED_PUBLIC_KEY_TYPE);
-	return(-1);
-	}
-
diff --git a/crypto/openssl/crypto/asn1/i2d_pu.c b/crypto/openssl/crypto/asn1/i2d_pu.c
deleted file mode 100644
index 34286dbd359f..000000000000
--- a/crypto/openssl/crypto/asn1/i2d_pu.c
+++ /dev/null
@@ -1,95 +0,0 @@
-/* crypto/asn1/i2d_pu.c */
-/* Copyright (C) 1995-1998 Eric Young (eay@cryptsoft.com)
- * All rights reserved.
- *
- * This package is an SSL implementation written
- * by Eric Young (eay@cryptsoft.com).
- * The implementation was written so as to conform with Netscapes SSL.
- * 
- * This library is free for commercial and non-commercial use as long as
- * the following conditions are aheared to.  The following conditions
- * apply to all code found in this distribution, be it the RC4, RSA,
- * lhash, DES, etc., code; not just the SSL code.  The SSL documentation
- * included with this distribution is covered by the same copyright terms
- * except that the holder is Tim Hudson (tjh@cryptsoft.com).
- * 
- * Copyright remains Eric Young's, and as such any Copyright notices in
- * the code are not to be removed.
- * If this package is used in a product, Eric Young should be given attribution
- * as the author of the parts of the library used.
- * This can be in the form of a textual message at program startup or
- * in documentation (online or textual) provided with the package.
- * 
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions
- * are met:
- * 1. Redistributions of source code must retain the copyright
- *    notice, this list of conditions and the following disclaimer.
- * 2. Redistributions in binary form must reproduce the above copyright
- *    notice, this list of conditions and the following disclaimer in the
- *    documentation and/or other materials provided with the distribution.
- * 3. All advertising materials mentioning features or use of this software
- *    must display the following acknowledgement:
- *    "This product includes cryptographic software written by
- *     Eric Young (eay@cryptsoft.com)"
- *    The word 'cryptographic' can be left out if the rouines from the library
- *    being used are not cryptographic related :-).
- * 4. If you include any Windows specific code (or a derivative thereof) from 
- *    the apps directory (application code) you must include an acknowledgement:
- *    "This product includes software written by Tim Hudson (tjh@cryptsoft.com)"
- * 
- * THIS SOFTWARE IS PROVIDED BY ERIC YOUNG ``AS IS'' AND
- * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
- * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
- * ARE DISCLAIMED.  IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE
- * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
- * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
- * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
- * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
- * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
- * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
- * SUCH DAMAGE.
- * 
- * The licence and distribution terms for any publically available version or
- * derivative of this code cannot be changed.  i.e. this code cannot simply be
- * copied and put under another distribution licence
- * [including the GNU Public Licence.]
- */
-
-#include <stdio.h>
-#include "cryptlib.h"
-#include <openssl/bn.h>
-#include <openssl/evp.h>
-#include <openssl/objects.h>
-#ifndef OPENSSL_NO_RSA
-#include <openssl/rsa.h>
-#endif
-#ifndef OPENSSL_NO_DSA
-#include <openssl/dsa.h>
-#endif
-#ifndef OPENSSL_NO_EC
-#include <openssl/ec.h>
-#endif
-
-int i2d_PublicKey(EVP_PKEY *a, unsigned char **pp)
-	{
-	switch (a->type)
-		{
-#ifndef OPENSSL_NO_RSA
-	case EVP_PKEY_RSA:
-		return(i2d_RSAPublicKey(a->pkey.rsa,pp));
-#endif
-#ifndef OPENSSL_NO_DSA
-	case EVP_PKEY_DSA:
-		return(i2d_DSAPublicKey(a->pkey.dsa,pp));
-#endif
-#ifndef OPENSSL_NO_EC
-	case EVP_PKEY_EC:
-		return(i2o_ECPublicKey(a->pkey.ec, pp));
-#endif
-	default:
-		ASN1err(ASN1_F_I2D_PUBLICKEY,ASN1_R_UNSUPPORTED_PUBLIC_KEY_TYPE);
-		return(-1);
-		}
-	}
-
diff --git a/crypto/openssl/crypto/asn1/n_pkey.c b/crypto/openssl/crypto/asn1/n_pkey.c
deleted file mode 100644
index 60bc437938cf..000000000000
--- a/crypto/openssl/crypto/asn1/n_pkey.c
+++ /dev/null
@@ -1,344 +0,0 @@
-/* crypto/asn1/n_pkey.c */
-/* Copyright (C) 1995-1998 Eric Young (eay@cryptsoft.com)
- * All rights reserved.
- *
- * This package is an SSL implementation written
- * by Eric Young (eay@cryptsoft.com).
- * The implementation was written so as to conform with Netscapes SSL.
- * 
- * This library is free for commercial and non-commercial use as long as
- * the following conditions are aheared to.  The following conditions
- * apply to all code found in this distribution, be it the RC4, RSA,
- * lhash, DES, etc., code; not just the SSL code.  The SSL documentation
- * included with this distribution is covered by the same copyright terms
- * except that the holder is Tim Hudson (tjh@cryptsoft.com).
- * 
- * Copyright remains Eric Young's, and as such any Copyright notices in
- * the code are not to be removed.
- * If this package is used in a product, Eric Young should be given attribution
- * as the author of the parts of the library used.
- * This can be in the form of a textual message at program startup or
- * in documentation (online or textual) provided with the package.
- * 
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions
- * are met:
- * 1. Redistributions of source code must retain the copyright
- *    notice, this list of conditions and the following disclaimer.
- * 2. Redistributions in binary form must reproduce the above copyright
- *    notice, this list of conditions and the following disclaimer in the
- *    documentation and/or other materials provided with the distribution.
- * 3. All advertising materials mentioning features or use of this software
- *    must display the following acknowledgement:
- *    "This product includes cryptographic software written by
- *     Eric Young (eay@cryptsoft.com)"
- *    The word 'cryptographic' can be left out if the rouines from the library
- *    being used are not cryptographic related :-).
- * 4. If you include any Windows specific code (or a derivative thereof) from 
- *    the apps directory (application code) you must include an acknowledgement:
- *    "This product includes software written by Tim Hudson (tjh@cryptsoft.com)"
- * 
- * THIS SOFTWARE IS PROVIDED BY ERIC YOUNG ``AS IS'' AND
- * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
- * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
- * ARE DISCLAIMED.  IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE
- * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
- * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
- * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
- * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
- * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
- * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
- * SUCH DAMAGE.
- * 
- * The licence and distribution terms for any publically available version or
- * derivative of this code cannot be changed.  i.e. this code cannot simply be
- * copied and put under another distribution licence
- * [including the GNU Public Licence.]
- */
-
-#include <stdio.h>
-#include "cryptlib.h"
-#ifndef OPENSSL_NO_RSA
-#include <openssl/rsa.h>
-#include <openssl/objects.h>
-#include <openssl/asn1t.h>
-#include <openssl/asn1_mac.h>
-#include <openssl/evp.h>
-#include <openssl/x509.h>
-
-
-#ifndef OPENSSL_NO_RC4
-
-typedef struct netscape_pkey_st
-	{
-	long version;
-	X509_ALGOR *algor;
-	ASN1_OCTET_STRING *private_key;
-	} NETSCAPE_PKEY;
-
-typedef struct netscape_encrypted_pkey_st
-	{
-	ASN1_OCTET_STRING *os;
-	/* This is the same structure as DigestInfo so use it:
-	 * although this isn't really anything to do with
-	 * digests.
-	 */
-	X509_SIG *enckey;
-	} NETSCAPE_ENCRYPTED_PKEY;
-
-
-ASN1_BROKEN_SEQUENCE(NETSCAPE_ENCRYPTED_PKEY) = {
-	ASN1_SIMPLE(NETSCAPE_ENCRYPTED_PKEY, os, ASN1_OCTET_STRING),
-	ASN1_SIMPLE(NETSCAPE_ENCRYPTED_PKEY, enckey, X509_SIG)
-} ASN1_BROKEN_SEQUENCE_END(NETSCAPE_ENCRYPTED_PKEY)
-
-DECLARE_ASN1_FUNCTIONS_const(NETSCAPE_ENCRYPTED_PKEY)
-DECLARE_ASN1_ENCODE_FUNCTIONS_const(NETSCAPE_ENCRYPTED_PKEY,NETSCAPE_ENCRYPTED_PKEY)
-IMPLEMENT_ASN1_FUNCTIONS_const(NETSCAPE_ENCRYPTED_PKEY)
-
-ASN1_SEQUENCE(NETSCAPE_PKEY) = {
-	ASN1_SIMPLE(NETSCAPE_PKEY, version, LONG),
-	ASN1_SIMPLE(NETSCAPE_PKEY, algor, X509_ALGOR),
-	ASN1_SIMPLE(NETSCAPE_PKEY, private_key, ASN1_OCTET_STRING)
-} ASN1_SEQUENCE_END(NETSCAPE_PKEY)
-
-DECLARE_ASN1_FUNCTIONS_const(NETSCAPE_PKEY)
-DECLARE_ASN1_ENCODE_FUNCTIONS_const(NETSCAPE_PKEY,NETSCAPE_PKEY)
-IMPLEMENT_ASN1_FUNCTIONS_const(NETSCAPE_PKEY)
-
-static RSA *d2i_RSA_NET_2(RSA **a, ASN1_OCTET_STRING *os,
-			  int (*cb)(char *buf, int len, const char *prompt,
-				    int verify),
-			  int sgckey);
-
-int i2d_Netscape_RSA(const RSA *a, unsigned char **pp,
-		     int (*cb)(char *buf, int len, const char *prompt,
-			       int verify))
-{
-	return i2d_RSA_NET(a, pp, cb, 0);
-}
-
-int i2d_RSA_NET(const RSA *a, unsigned char **pp,
-		int (*cb)(char *buf, int len, const char *prompt, int verify),
-		int sgckey)
-	{
-	int i, j, ret = 0;
-	int rsalen, pkeylen, olen;
-	NETSCAPE_PKEY *pkey = NULL;
-	NETSCAPE_ENCRYPTED_PKEY *enckey = NULL;
-	unsigned char buf[256],*zz;
-	unsigned char key[EVP_MAX_KEY_LENGTH];
-	EVP_CIPHER_CTX ctx;
-
-	if (a == NULL) return(0);
-
-	if ((pkey=NETSCAPE_PKEY_new()) == NULL) goto err;
-	if ((enckey=NETSCAPE_ENCRYPTED_PKEY_new()) == NULL) goto err;
-	pkey->version = 0;
-
-	pkey->algor->algorithm=OBJ_nid2obj(NID_rsaEncryption);
-	if ((pkey->algor->parameter=ASN1_TYPE_new()) == NULL) goto err;
-	pkey->algor->parameter->type=V_ASN1_NULL;
-
-	rsalen = i2d_RSAPrivateKey(a, NULL);
-
-	/* Fake some octet strings just for the initial length
-	 * calculation.
- 	 */
-
-	pkey->private_key->length=rsalen;
-
-	pkeylen=i2d_NETSCAPE_PKEY(pkey,NULL);
-
-	enckey->enckey->digest->length = pkeylen;
-
-	enckey->os->length = 11;	/* "private-key" */
-
-	enckey->enckey->algor->algorithm=OBJ_nid2obj(NID_rc4);
-	if ((enckey->enckey->algor->parameter=ASN1_TYPE_new()) == NULL) goto err;
-	enckey->enckey->algor->parameter->type=V_ASN1_NULL;
-
-	if (pp == NULL)
-		{
-		olen = i2d_NETSCAPE_ENCRYPTED_PKEY(enckey, NULL);
-		NETSCAPE_PKEY_free(pkey);
-		NETSCAPE_ENCRYPTED_PKEY_free(enckey);
-		return olen;
-		}
-
-
-	/* Since its RC4 encrypted length is actual length */
-	if ((zz=(unsigned char *)OPENSSL_malloc(rsalen)) == NULL)
-		{
-		ASN1err(ASN1_F_I2D_RSA_NET,ERR_R_MALLOC_FAILURE);
-		goto err;
-		}
-
-	pkey->private_key->data = zz;
-	/* Write out private key encoding */
-	i2d_RSAPrivateKey(a,&zz);
-
-	if ((zz=OPENSSL_malloc(pkeylen)) == NULL)
-		{
-		ASN1err(ASN1_F_I2D_RSA_NET,ERR_R_MALLOC_FAILURE);
-		goto err;
-		}
-
-	if (!ASN1_STRING_set(enckey->os, "private-key", -1)) 
-		{
-		ASN1err(ASN1_F_I2D_RSA_NET,ERR_R_MALLOC_FAILURE);
-		goto err;
-		}
-	enckey->enckey->digest->data = zz;
-	i2d_NETSCAPE_PKEY(pkey,&zz);
-
-	/* Wipe the private key encoding */
-	OPENSSL_cleanse(pkey->private_key->data, rsalen);
-		
-	if (cb == NULL)
-		cb=EVP_read_pw_string;
-	i=cb((char *)buf,256,"Enter Private Key password:",1);
-	if (i != 0)
-		{
-		ASN1err(ASN1_F_I2D_RSA_NET,ASN1_R_BAD_PASSWORD_READ);
-		goto err;
-		}
-	i = strlen((char *)buf);
-	/* If the key is used for SGC the algorithm is modified a little. */
-	if(sgckey) {
-		EVP_Digest(buf, i, buf, NULL, EVP_md5(), NULL);
-		memcpy(buf + 16, "SGCKEYSALT", 10);
-		i = 26;
-	}
-
-	EVP_BytesToKey(EVP_rc4(),EVP_md5(),NULL,buf,i,1,key,NULL);
-	OPENSSL_cleanse(buf,256);
-
-	/* Encrypt private key in place */
-	zz = enckey->enckey->digest->data;
-	EVP_CIPHER_CTX_init(&ctx);
-	EVP_EncryptInit_ex(&ctx,EVP_rc4(),NULL,key,NULL);
-	EVP_EncryptUpdate(&ctx,zz,&i,zz,pkeylen);
-	EVP_EncryptFinal_ex(&ctx,zz + i,&j);
-	EVP_CIPHER_CTX_cleanup(&ctx);
-
-	ret = i2d_NETSCAPE_ENCRYPTED_PKEY(enckey, pp);
-err:
-	NETSCAPE_ENCRYPTED_PKEY_free(enckey);
-	NETSCAPE_PKEY_free(pkey);
-	return(ret);
-	}
-
-
-RSA *d2i_Netscape_RSA(RSA **a, const unsigned char **pp, long length,
-		      int (*cb)(char *buf, int len, const char *prompt,
-				int verify))
-{
-	return d2i_RSA_NET(a, pp, length, cb, 0);
-}
-
-RSA *d2i_RSA_NET(RSA **a, const unsigned char **pp, long length,
-		 int (*cb)(char *buf, int len, const char *prompt, int verify),
-		 int sgckey)
-	{
-	RSA *ret=NULL;
-	const unsigned char *p, *kp;
-	NETSCAPE_ENCRYPTED_PKEY *enckey = NULL;
-
-	p = *pp;
-
-	enckey = d2i_NETSCAPE_ENCRYPTED_PKEY(NULL, &p, length);
-	if(!enckey) {
-		ASN1err(ASN1_F_D2I_RSA_NET,ASN1_R_DECODING_ERROR);
-		return NULL;
-	}
-
-	if ((enckey->os->length != 11) || (strncmp("private-key",
-		(char *)enckey->os->data,11) != 0))
-		{
-		ASN1err(ASN1_F_D2I_RSA_NET,ASN1_R_PRIVATE_KEY_HEADER_MISSING);
-		NETSCAPE_ENCRYPTED_PKEY_free(enckey);
-		return NULL;
-		}
-	if (OBJ_obj2nid(enckey->enckey->algor->algorithm) != NID_rc4)
-		{
-		ASN1err(ASN1_F_D2I_RSA_NET,ASN1_R_UNSUPPORTED_ENCRYPTION_ALGORITHM);
-		goto err;
-	}
-	kp = enckey->enckey->digest->data;
-	if (cb == NULL)
-		cb=EVP_read_pw_string;
-	if ((ret=d2i_RSA_NET_2(a, enckey->enckey->digest,cb, sgckey)) == NULL) goto err;
-
-	*pp = p;
-
-	err:
-	NETSCAPE_ENCRYPTED_PKEY_free(enckey);
-	return ret;
-
-	}
-
-static RSA *d2i_RSA_NET_2(RSA **a, ASN1_OCTET_STRING *os,
-			  int (*cb)(char *buf, int len, const char *prompt,
-				    int verify), int sgckey)
-	{
-	NETSCAPE_PKEY *pkey=NULL;
-	RSA *ret=NULL;
-	int i,j;
-	unsigned char buf[256];
-	const unsigned char *zz;
-	unsigned char key[EVP_MAX_KEY_LENGTH];
-	EVP_CIPHER_CTX ctx;
-
-	i=cb((char *)buf,256,"Enter Private Key password:",0);
-	if (i != 0)
-		{
-		ASN1err(ASN1_F_D2I_RSA_NET_2,ASN1_R_BAD_PASSWORD_READ);
-		goto err;
-		}
-
-	i = strlen((char *)buf);
-	if(sgckey){
-		EVP_Digest(buf, i, buf, NULL, EVP_md5(), NULL);
-		memcpy(buf + 16, "SGCKEYSALT", 10);
-		i = 26;
-	}
-		
-	EVP_BytesToKey(EVP_rc4(),EVP_md5(),NULL,buf,i,1,key,NULL);
-	OPENSSL_cleanse(buf,256);
-
-	EVP_CIPHER_CTX_init(&ctx);
-	EVP_DecryptInit_ex(&ctx,EVP_rc4(),NULL, key,NULL);
-	EVP_DecryptUpdate(&ctx,os->data,&i,os->data,os->length);
-	EVP_DecryptFinal_ex(&ctx,&(os->data[i]),&j);
-	EVP_CIPHER_CTX_cleanup(&ctx);
-	os->length=i+j;
-
-	zz=os->data;
-
-	if ((pkey=d2i_NETSCAPE_PKEY(NULL,&zz,os->length)) == NULL)
-		{
-		ASN1err(ASN1_F_D2I_RSA_NET_2,ASN1_R_UNABLE_TO_DECODE_RSA_PRIVATE_KEY);
-		goto err;
-		}
-		
-	zz=pkey->private_key->data;
-	if ((ret=d2i_RSAPrivateKey(a,&zz,pkey->private_key->length)) == NULL)
-		{
-		ASN1err(ASN1_F_D2I_RSA_NET_2,ASN1_R_UNABLE_TO_DECODE_RSA_KEY);
-		goto err;
-		}
-err:
-	NETSCAPE_PKEY_free(pkey);
-	return(ret);
-	}
-
-#endif /* OPENSSL_NO_RC4 */
-
-#else /* !OPENSSL_NO_RSA */
-
-# if PEDANTIC
-static void *dummy=&dummy;
-# endif
-
-#endif
diff --git a/crypto/openssl/crypto/asn1/nsseq.c b/crypto/openssl/crypto/asn1/nsseq.c
deleted file mode 100644
index 50e2d4d07a13..000000000000
--- a/crypto/openssl/crypto/asn1/nsseq.c
+++ /dev/null
@@ -1,82 +0,0 @@
-/* nsseq.c */
-/* Written by Dr Stephen N Henson (shenson@bigfoot.com) for the OpenSSL
- * project 1999.
- */
-/* ====================================================================
- * Copyright (c) 1999 The OpenSSL Project.  All rights reserved.
- *
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions
- * are met:
- *
- * 1. Redistributions of source code must retain the above copyright
- *    notice, this list of conditions and the following disclaimer. 
- *
- * 2. Redistributions in binary form must reproduce the above copyright
- *    notice, this list of conditions and the following disclaimer in
- *    the documentation and/or other materials provided with the
- *    distribution.
- *
- * 3. All advertising materials mentioning features or use of this
- *    software must display the following acknowledgment:
- *    "This product includes software developed by the OpenSSL Project
- *    for use in the OpenSSL Toolkit. (http://www.OpenSSL.org/)"
- *
- * 4. The names "OpenSSL Toolkit" and "OpenSSL Project" must not be used to
- *    endorse or promote products derived from this software without
- *    prior written permission. For written permission, please contact
- *    licensing@OpenSSL.org.
- *
- * 5. Products derived from this software may not be called "OpenSSL"
- *    nor may "OpenSSL" appear in their names without prior written
- *    permission of the OpenSSL Project.
- *
- * 6. Redistributions of any form whatsoever must retain the following
- *    acknowledgment:
- *    "This product includes software developed by the OpenSSL Project
- *    for use in the OpenSSL Toolkit (http://www.OpenSSL.org/)"
- *
- * THIS SOFTWARE IS PROVIDED BY THE OpenSSL PROJECT ``AS IS'' AND ANY
- * EXPRESSED OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
- * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR
- * PURPOSE ARE DISCLAIMED.  IN NO EVENT SHALL THE OpenSSL PROJECT OR
- * ITS CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
- * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
- * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
- * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
- * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
- * STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
- * ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED
- * OF THE POSSIBILITY OF SUCH DAMAGE.
- * ====================================================================
- *
- * This product includes cryptographic software written by Eric Young
- * (eay@cryptsoft.com).  This product includes software written by Tim
- * Hudson (tjh@cryptsoft.com).
- *
- */
-
-#include <stdio.h>
-#include <stdlib.h>
-#include <openssl/asn1t.h>
-#include <openssl/x509.h>
-#include <openssl/objects.h>
-
-static int nsseq_cb(int operation, ASN1_VALUE **pval, const ASN1_ITEM *it)
-{
-	if(operation == ASN1_OP_NEW_POST) {
-		NETSCAPE_CERT_SEQUENCE *nsseq;
-		nsseq = (NETSCAPE_CERT_SEQUENCE *)*pval;
-		nsseq->type = OBJ_nid2obj(NID_netscape_cert_sequence);
-	}
-	return 1;
-}
-
-/* Netscape certificate sequence structure */
-
-ASN1_SEQUENCE_cb(NETSCAPE_CERT_SEQUENCE, nsseq_cb) = {
-	ASN1_SIMPLE(NETSCAPE_CERT_SEQUENCE, type, ASN1_OBJECT),
-	ASN1_EXP_SEQUENCE_OF_OPT(NETSCAPE_CERT_SEQUENCE, certs, X509, 0)
-} ASN1_SEQUENCE_END_cb(NETSCAPE_CERT_SEQUENCE, NETSCAPE_CERT_SEQUENCE)
-
-IMPLEMENT_ASN1_FUNCTIONS(NETSCAPE_CERT_SEQUENCE)
diff --git a/crypto/openssl/crypto/asn1/p5_pbe.c b/crypto/openssl/crypto/asn1/p5_pbe.c
deleted file mode 100644
index da91170094b5..000000000000
--- a/crypto/openssl/crypto/asn1/p5_pbe.c
+++ /dev/null
@@ -1,131 +0,0 @@
-/* p5_pbe.c */
-/* Written by Dr Stephen N Henson (shenson@bigfoot.com) for the OpenSSL
- * project 1999.
- */
-/* ====================================================================
- * Copyright (c) 1999 The OpenSSL Project.  All rights reserved.
- *
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions
- * are met:
- *
- * 1. Redistributions of source code must retain the above copyright
- *    notice, this list of conditions and the following disclaimer. 
- *
- * 2. Redistributions in binary form must reproduce the above copyright
- *    notice, this list of conditions and the following disclaimer in
- *    the documentation and/or other materials provided with the
- *    distribution.
- *
- * 3. All advertising materials mentioning features or use of this
- *    software must display the following acknowledgment:
- *    "This product includes software developed by the OpenSSL Project
- *    for use in the OpenSSL Toolkit. (http://www.OpenSSL.org/)"
- *
- * 4. The names "OpenSSL Toolkit" and "OpenSSL Project" must not be used to
- *    endorse or promote products derived from this software without
- *    prior written permission. For written permission, please contact
- *    licensing@OpenSSL.org.
- *
- * 5. Products derived from this software may not be called "OpenSSL"
- *    nor may "OpenSSL" appear in their names without prior written
- *    permission of the OpenSSL Project.
- *
- * 6. Redistributions of any form whatsoever must retain the following
- *    acknowledgment:
- *    "This product includes software developed by the OpenSSL Project
- *    for use in the OpenSSL Toolkit (http://www.OpenSSL.org/)"
- *
- * THIS SOFTWARE IS PROVIDED BY THE OpenSSL PROJECT ``AS IS'' AND ANY
- * EXPRESSED OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
- * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR
- * PURPOSE ARE DISCLAIMED.  IN NO EVENT SHALL THE OpenSSL PROJECT OR
- * ITS CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
- * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
- * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
- * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
- * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
- * STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
- * ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED
- * OF THE POSSIBILITY OF SUCH DAMAGE.
- * ====================================================================
- *
- * This product includes cryptographic software written by Eric Young
- * (eay@cryptsoft.com).  This product includes software written by Tim
- * Hudson (tjh@cryptsoft.com).
- *
- */
-
-#include <stdio.h>
-#include "cryptlib.h"
-#include <openssl/asn1t.h>
-#include <openssl/x509.h>
-#include <openssl/rand.h>
-
-/* PKCS#5 password based encryption structure */
-
-ASN1_SEQUENCE(PBEPARAM) = {
-	ASN1_SIMPLE(PBEPARAM, salt, ASN1_OCTET_STRING),
-	ASN1_SIMPLE(PBEPARAM, iter, ASN1_INTEGER)
-} ASN1_SEQUENCE_END(PBEPARAM)
-
-IMPLEMENT_ASN1_FUNCTIONS(PBEPARAM)
-
-/* Return an algorithm identifier for a PKCS#5 PBE algorithm */
-
-X509_ALGOR *PKCS5_pbe_set(int alg, int iter, unsigned char *salt,
-	     int saltlen)
-{
-	PBEPARAM *pbe=NULL;
-	ASN1_OBJECT *al;
-	X509_ALGOR *algor;
-	ASN1_TYPE *astype=NULL;
-
-	if (!(pbe = PBEPARAM_new ())) {
-		ASN1err(ASN1_F_PKCS5_PBE_SET,ERR_R_MALLOC_FAILURE);
-		goto err;
-	}
-	if(iter <= 0) iter = PKCS5_DEFAULT_ITER;
-	if (!ASN1_INTEGER_set(pbe->iter, iter)) {
-		ASN1err(ASN1_F_PKCS5_PBE_SET,ERR_R_MALLOC_FAILURE);
-		goto err;
-	}
-	if (!saltlen) saltlen = PKCS5_SALT_LEN;
-	if (!(pbe->salt->data = OPENSSL_malloc (saltlen))) {
-		ASN1err(ASN1_F_PKCS5_PBE_SET,ERR_R_MALLOC_FAILURE);
-		goto err;
-	}
-	pbe->salt->length = saltlen;
-	if (salt) memcpy (pbe->salt->data, salt, saltlen);
-	else if (RAND_pseudo_bytes (pbe->salt->data, saltlen) < 0)
-		goto err;
-
-	if (!(astype = ASN1_TYPE_new())) {
-		ASN1err(ASN1_F_PKCS5_PBE_SET,ERR_R_MALLOC_FAILURE);
-		goto err;
-	}
-
-	astype->type = V_ASN1_SEQUENCE;
-	if(!ASN1_pack_string_of(PBEPARAM, pbe, i2d_PBEPARAM,
-				&astype->value.sequence)) {
-		ASN1err(ASN1_F_PKCS5_PBE_SET,ERR_R_MALLOC_FAILURE);
-		goto err;
-	}
-	PBEPARAM_free (pbe);
-	pbe = NULL;
-	
-	al = OBJ_nid2obj(alg); /* never need to free al */
-	if (!(algor = X509_ALGOR_new())) {
-		ASN1err(ASN1_F_PKCS5_PBE_SET,ERR_R_MALLOC_FAILURE);
-		goto err;
-	}
-	ASN1_OBJECT_free(algor->algorithm);
-	algor->algorithm = al;
-	algor->parameter = astype;
-
-	return (algor);
-err:
-	if (pbe != NULL) PBEPARAM_free(pbe);
-	if (astype != NULL) ASN1_TYPE_free(astype);
-	return NULL;
-}
diff --git a/crypto/openssl/crypto/asn1/p5_pbev2.c b/crypto/openssl/crypto/asn1/p5_pbev2.c
deleted file mode 100644
index c834a38ddf3c..000000000000
--- a/crypto/openssl/crypto/asn1/p5_pbev2.c
+++ /dev/null
@@ -1,205 +0,0 @@
-/* p5_pbev2.c */
-/* Written by Dr Stephen N Henson (shenson@bigfoot.com) for the OpenSSL
- * project 1999-2004.
- */
-/* ====================================================================
- * Copyright (c) 1999 The OpenSSL Project.  All rights reserved.
- *
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions
- * are met:
- *
- * 1. Redistributions of source code must retain the above copyright
- *    notice, this list of conditions and the following disclaimer. 
- *
- * 2. Redistributions in binary form must reproduce the above copyright
- *    notice, this list of conditions and the following disclaimer in
- *    the documentation and/or other materials provided with the
- *    distribution.
- *
- * 3. All advertising materials mentioning features or use of this
- *    software must display the following acknowledgment:
- *    "This product includes software developed by the OpenSSL Project
- *    for use in the OpenSSL Toolkit. (http://www.OpenSSL.org/)"
- *
- * 4. The names "OpenSSL Toolkit" and "OpenSSL Project" must not be used to
- *    endorse or promote products derived from this software without
- *    prior written permission. For written permission, please contact
- *    licensing@OpenSSL.org.
- *
- * 5. Products derived from this software may not be called "OpenSSL"
- *    nor may "OpenSSL" appear in their names without prior written
- *    permission of the OpenSSL Project.
- *
- * 6. Redistributions of any form whatsoever must retain the following
- *    acknowledgment:
- *    "This product includes software developed by the OpenSSL Project
- *    for use in the OpenSSL Toolkit (http://www.OpenSSL.org/)"
- *
- * THIS SOFTWARE IS PROVIDED BY THE OpenSSL PROJECT ``AS IS'' AND ANY
- * EXPRESSED OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
- * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR
- * PURPOSE ARE DISCLAIMED.  IN NO EVENT SHALL THE OpenSSL PROJECT OR
- * ITS CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
- * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
- * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
- * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
- * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
- * STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
- * ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED
- * OF THE POSSIBILITY OF SUCH DAMAGE.
- * ====================================================================
- *
- * This product includes cryptographic software written by Eric Young
- * (eay@cryptsoft.com).  This product includes software written by Tim
- * Hudson (tjh@cryptsoft.com).
- *
- */
-
-#include <stdio.h>
-#include "cryptlib.h"
-#include <openssl/asn1t.h>
-#include <openssl/x509.h>
-#include <openssl/rand.h>
-
-/* PKCS#5 v2.0 password based encryption structures */
-
-ASN1_SEQUENCE(PBE2PARAM) = {
-	ASN1_SIMPLE(PBE2PARAM, keyfunc, X509_ALGOR),
-	ASN1_SIMPLE(PBE2PARAM, encryption, X509_ALGOR)
-} ASN1_SEQUENCE_END(PBE2PARAM)
-
-IMPLEMENT_ASN1_FUNCTIONS(PBE2PARAM)
-
-ASN1_SEQUENCE(PBKDF2PARAM) = {
-	ASN1_SIMPLE(PBKDF2PARAM, salt, ASN1_ANY),
-	ASN1_SIMPLE(PBKDF2PARAM, iter, ASN1_INTEGER),
-	ASN1_OPT(PBKDF2PARAM, keylength, ASN1_INTEGER),
-	ASN1_OPT(PBKDF2PARAM, prf, X509_ALGOR)
-} ASN1_SEQUENCE_END(PBKDF2PARAM)
-
-IMPLEMENT_ASN1_FUNCTIONS(PBKDF2PARAM)
-
-/* Return an algorithm identifier for a PKCS#5 v2.0 PBE algorithm:
- * yes I know this is horrible!
- */
-
-X509_ALGOR *PKCS5_pbe2_set(const EVP_CIPHER *cipher, int iter,
-				 unsigned char *salt, int saltlen)
-{
-	X509_ALGOR *scheme = NULL, *kalg = NULL, *ret = NULL;
-	int alg_nid;
-	EVP_CIPHER_CTX ctx;
-	unsigned char iv[EVP_MAX_IV_LENGTH];
-	PBKDF2PARAM *kdf = NULL;
-	PBE2PARAM *pbe2 = NULL;
-	ASN1_OCTET_STRING *osalt = NULL;
-	ASN1_OBJECT *obj;
-
-	alg_nid = EVP_CIPHER_type(cipher);
-	if(alg_nid == NID_undef) {
-		ASN1err(ASN1_F_PKCS5_PBE2_SET,
-				ASN1_R_CIPHER_HAS_NO_OBJECT_IDENTIFIER);
-		goto err;
-	}
-	obj = OBJ_nid2obj(alg_nid);
-
-	if(!(pbe2 = PBE2PARAM_new())) goto merr;
-
-	/* Setup the AlgorithmIdentifier for the encryption scheme */
-	scheme = pbe2->encryption;
-
-	scheme->algorithm = obj;
-	if(!(scheme->parameter = ASN1_TYPE_new())) goto merr;
-
-	/* Create random IV */
-	if (EVP_CIPHER_iv_length(cipher) &&
-		RAND_pseudo_bytes(iv, EVP_CIPHER_iv_length(cipher)) < 0)
-  		goto err;
-
-	EVP_CIPHER_CTX_init(&ctx);
-
-	/* Dummy cipherinit to just setup the IV */
-	EVP_CipherInit_ex(&ctx, cipher, NULL, NULL, iv, 0);
-	if(EVP_CIPHER_param_to_asn1(&ctx, scheme->parameter) < 0) {
-		ASN1err(ASN1_F_PKCS5_PBE2_SET,
-					ASN1_R_ERROR_SETTING_CIPHER_PARAMS);
-		EVP_CIPHER_CTX_cleanup(&ctx);
-		goto err;
-	}
-	EVP_CIPHER_CTX_cleanup(&ctx);
-
-	if(!(kdf = PBKDF2PARAM_new())) goto merr;
-	if(!(osalt = M_ASN1_OCTET_STRING_new())) goto merr;
-
-	if (!saltlen) saltlen = PKCS5_SALT_LEN;
-	if (!(osalt->data = OPENSSL_malloc (saltlen))) goto merr;
-	osalt->length = saltlen;
-	if (salt) memcpy (osalt->data, salt, saltlen);
-	else if (RAND_pseudo_bytes (osalt->data, saltlen) < 0) goto merr;
-
-	if(iter <= 0) iter = PKCS5_DEFAULT_ITER;
-	if(!ASN1_INTEGER_set(kdf->iter, iter)) goto merr;
-
-	/* Now include salt in kdf structure */
-	kdf->salt->value.octet_string = osalt;
-	kdf->salt->type = V_ASN1_OCTET_STRING;
-	osalt = NULL;
-
-	/* If its RC2 then we'd better setup the key length */
-
-	if(alg_nid == NID_rc2_cbc) {
-		if(!(kdf->keylength = M_ASN1_INTEGER_new())) goto merr;
-		if(!ASN1_INTEGER_set (kdf->keylength,
-				 EVP_CIPHER_key_length(cipher))) goto merr;
-	}
-
-	/* prf can stay NULL because we are using hmacWithSHA1 */
-
-	/* Now setup the PBE2PARAM keyfunc structure */
-
-	pbe2->keyfunc->algorithm = OBJ_nid2obj(NID_id_pbkdf2);
-
-	/* Encode PBKDF2PARAM into parameter of pbe2 */
-
-	if(!(pbe2->keyfunc->parameter = ASN1_TYPE_new())) goto merr;
-
-	if(!ASN1_pack_string_of(PBKDF2PARAM, kdf, i2d_PBKDF2PARAM,
-			 &pbe2->keyfunc->parameter->value.sequence)) goto merr;
-	pbe2->keyfunc->parameter->type = V_ASN1_SEQUENCE;
-
-	PBKDF2PARAM_free(kdf);
-	kdf = NULL;
-
-	/* Now set up top level AlgorithmIdentifier */
-
-	if(!(ret = X509_ALGOR_new())) goto merr;
-	if(!(ret->parameter = ASN1_TYPE_new())) goto merr;
-
-	ret->algorithm = OBJ_nid2obj(NID_pbes2);
-
-	/* Encode PBE2PARAM into parameter */
-
-	if(!ASN1_pack_string_of(PBE2PARAM, pbe2, i2d_PBE2PARAM,
-				 &ret->parameter->value.sequence)) goto merr;
-	ret->parameter->type = V_ASN1_SEQUENCE;
-
-	PBE2PARAM_free(pbe2);
-	pbe2 = NULL;
-
-	return ret;
-
-	merr:
-	ASN1err(ASN1_F_PKCS5_PBE2_SET,ERR_R_MALLOC_FAILURE);
-
-	err:
-	PBE2PARAM_free(pbe2);
-	/* Note 'scheme' is freed as part of pbe2 */
-	M_ASN1_OCTET_STRING_free(osalt);
-	PBKDF2PARAM_free(kdf);
-	X509_ALGOR_free(kalg);
-	X509_ALGOR_free(ret);
-
-	return NULL;
-
-}
diff --git a/crypto/openssl/crypto/asn1/p8_key.c b/crypto/openssl/crypto/asn1/p8_key.c
deleted file mode 100644
index 3a31248e14be..000000000000
--- a/crypto/openssl/crypto/asn1/p8_key.c
+++ /dev/null
@@ -1,131 +0,0 @@
-/* crypto/asn1/p8_key.c */
-/* Copyright (C) 1995-1998 Eric Young (eay@cryptsoft.com)
- * All rights reserved.
- *
- * This package is an SSL implementation written
- * by Eric Young (eay@cryptsoft.com).
- * The implementation was written so as to conform with Netscapes SSL.
- * 
- * This library is free for commercial and non-commercial use as long as
- * the following conditions are aheared to.  The following conditions
- * apply to all code found in this distribution, be it the RC4, RSA,
- * lhash, DES, etc., code; not just the SSL code.  The SSL documentation
- * included with this distribution is covered by the same copyright terms
- * except that the holder is Tim Hudson (tjh@cryptsoft.com).
- * 
- * Copyright remains Eric Young's, and as such any Copyright notices in
- * the code are not to be removed.
- * If this package is used in a product, Eric Young should be given attribution
- * as the author of the parts of the library used.
- * This can be in the form of a textual message at program startup or
- * in documentation (online or textual) provided with the package.
- * 
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions
- * are met:
- * 1. Redistributions of source code must retain the copyright
- *    notice, this list of conditions and the following disclaimer.
- * 2. Redistributions in binary form must reproduce the above copyright
- *    notice, this list of conditions and the following disclaimer in the
- *    documentation and/or other materials provided with the distribution.
- * 3. All advertising materials mentioning features or use of this software
- *    must display the following acknowledgement:
- *    "This product includes cryptographic software written by
- *     Eric Young (eay@cryptsoft.com)"
- *    The word 'cryptographic' can be left out if the rouines from the library
- *    being used are not cryptographic related :-).
- * 4. If you include any Windows specific code (or a derivative thereof) from 
- *    the apps directory (application code) you must include an acknowledgement:
- *    "This product includes software written by Tim Hudson (tjh@cryptsoft.com)"
- * 
- * THIS SOFTWARE IS PROVIDED BY ERIC YOUNG ``AS IS'' AND
- * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
- * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
- * ARE DISCLAIMED.  IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE
- * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
- * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
- * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
- * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
- * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
- * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
- * SUCH DAMAGE.
- * 
- * The licence and distribution terms for any publically available version or
- * derivative of this code cannot be changed.  i.e. this code cannot simply be
- * copied and put under another distribution licence
- * [including the GNU Public Licence.]
- */
-
-#include <stdio.h>
-#include "cryptlib.h"
-#include <openssl/asn1_mac.h>
-#include <openssl/objects.h>
-
-int i2d_X509_KEY(X509 *a, unsigned char **pp)
-	{
-	M_ASN1_I2D_vars(a);
-
-	M_ASN1_I2D_len(a->cert_info,	i2d_X509_CINF);
-	M_ASN1_I2D_len(a->sig_alg,	i2d_X509_ALGOR);
-	M_ASN1_I2D_len(a->signature,	i2d_ASN1_BIT_STRING);
-
-	M_ASN1_I2D_seq_total();
-
-	M_ASN1_I2D_put(a->cert_info,	i2d_X509_CINF);
-	M_ASN1_I2D_put(a->sig_alg,	i2d_X509_ALGOR);
-	M_ASN1_I2D_put(a->signature,	i2d_ASN1_BIT_STRING);
-
-	M_ASN1_I2D_finish();
-	}
-
-X509 *d2i_X509_KEY(X509 **a, unsigned char **pp, long length)
-	{
-	M_ASN1_D2I_vars(a,X509 *,X509_new);
-
-	M_ASN1_D2I_Init();
-	M_ASN1_D2I_start_sequence();
-	M_ASN1_D2I_get(ret->cert_info,d2i_X509_CINF);
-	M_ASN1_D2I_get(ret->sig_alg,d2i_X509_ALGOR);
-	M_ASN1_D2I_get(ret->signature,d2i_ASN1_BIT_STRING);
-	M_ASN1_D2I_Finish(a,X509_free,ASN1_F_D2I_X509);
-	}
-
-X509 *X509_KEY_new(void)
-	{
-	X509_KEY *ret=NULL;
-
-	M_ASN1_New_OPENSSL_malloc(ret,X509_KEY);
-	ret->references=1;
-	ret->type=NID
-	M_ASN1_New(ret->cert_info,X509_CINF_new);
-	M_ASN1_New(ret->sig_alg,X509_ALGOR_new);
-	M_ASN1_New(ret->signature,ASN1_BIT_STRING_new);
-	return(ret);
-	M_ASN1_New_Error(ASN1_F_X509_NEW);
-	}
-
-void X509_KEY_free(X509 *a)
-	{
-	int i;
-
-	if (a == NULL) return;
-
-	i=CRYPTO_add_lock(&a->references,-1,CRYPTO_LOCK_X509_KEY);
-#ifdef REF_PRINT
-	REF_PRINT("X509_KEY",a);
-#endif
-	if (i > 0) return;
-#ifdef REF_CHECK
-	if (i < 0)
-		{
-		fprintf(stderr,"X509_KEY_free, bad reference count\n");
-		abort();
-		}
-#endif
-
-	X509_CINF_free(a->cert_info);
-	X509_ALGOR_free(a->sig_alg);
-	ASN1_BIT_STRING_free(a->signature);
-	OPENSSL_free(a);
-	}
-
diff --git a/crypto/openssl/crypto/asn1/p8_pkey.c b/crypto/openssl/crypto/asn1/p8_pkey.c
deleted file mode 100644
index 24b409132f53..000000000000
--- a/crypto/openssl/crypto/asn1/p8_pkey.c
+++ /dev/null
@@ -1,84 +0,0 @@
-/* p8_pkey.c */
-/* Written by Dr Stephen N Henson (shenson@bigfoot.com) for the OpenSSL
- * project 1999.
- */
-/* ====================================================================
- * Copyright (c) 1999 The OpenSSL Project.  All rights reserved.
- *
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions
- * are met:
- *
- * 1. Redistributions of source code must retain the above copyright
- *    notice, this list of conditions and the following disclaimer. 
- *
- * 2. Redistributions in binary form must reproduce the above copyright
- *    notice, this list of conditions and the following disclaimer in
- *    the documentation and/or other materials provided with the
- *    distribution.
- *
- * 3. All advertising materials mentioning features or use of this
- *    software must display the following acknowledgment:
- *    "This product includes software developed by the OpenSSL Project
- *    for use in the OpenSSL Toolkit. (http://www.OpenSSL.org/)"
- *
- * 4. The names "OpenSSL Toolkit" and "OpenSSL Project" must not be used to
- *    endorse or promote products derived from this software without
- *    prior written permission. For written permission, please contact
- *    licensing@OpenSSL.org.
- *
- * 5. Products derived from this software may not be called "OpenSSL"
- *    nor may "OpenSSL" appear in their names without prior written
- *    permission of the OpenSSL Project.
- *
- * 6. Redistributions of any form whatsoever must retain the following
- *    acknowledgment:
- *    "This product includes software developed by the OpenSSL Project
- *    for use in the OpenSSL Toolkit (http://www.OpenSSL.org/)"
- *
- * THIS SOFTWARE IS PROVIDED BY THE OpenSSL PROJECT ``AS IS'' AND ANY
- * EXPRESSED OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
- * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR
- * PURPOSE ARE DISCLAIMED.  IN NO EVENT SHALL THE OpenSSL PROJECT OR
- * ITS CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
- * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
- * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
- * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
- * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
- * STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
- * ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED
- * OF THE POSSIBILITY OF SUCH DAMAGE.
- * ====================================================================
- *
- * This product includes cryptographic software written by Eric Young
- * (eay@cryptsoft.com).  This product includes software written by Tim
- * Hudson (tjh@cryptsoft.com).
- *
- */
-
-#include <stdio.h>
-#include "cryptlib.h"
-#include <openssl/asn1t.h>
-#include <openssl/x509.h>
-
-/* Minor tweak to operation: zero private key data */
-static int pkey_cb(int operation, ASN1_VALUE **pval, const ASN1_ITEM *it)
-{
-	/* Since the structure must still be valid use ASN1_OP_FREE_PRE */
-	if(operation == ASN1_OP_FREE_PRE) {
-		PKCS8_PRIV_KEY_INFO *key = (PKCS8_PRIV_KEY_INFO *)*pval;
-		if (key->pkey->value.octet_string)
-		OPENSSL_cleanse(key->pkey->value.octet_string->data,
-			key->pkey->value.octet_string->length);
-	}
-	return 1;
-}
-
-ASN1_SEQUENCE_cb(PKCS8_PRIV_KEY_INFO, pkey_cb) = {
-	ASN1_SIMPLE(PKCS8_PRIV_KEY_INFO, version, ASN1_INTEGER),
-	ASN1_SIMPLE(PKCS8_PRIV_KEY_INFO, pkeyalg, X509_ALGOR),
-	ASN1_SIMPLE(PKCS8_PRIV_KEY_INFO, pkey, ASN1_ANY),
-	ASN1_IMP_SET_OF_OPT(PKCS8_PRIV_KEY_INFO, attributes, X509_ATTRIBUTE, 0)
-} ASN1_SEQUENCE_END_cb(PKCS8_PRIV_KEY_INFO, PKCS8_PRIV_KEY_INFO)
-
-IMPLEMENT_ASN1_FUNCTIONS(PKCS8_PRIV_KEY_INFO)
diff --git a/crypto/openssl/crypto/asn1/t_bitst.c b/crypto/openssl/crypto/asn1/t_bitst.c
deleted file mode 100644
index 397332d9b8e6..000000000000
--- a/crypto/openssl/crypto/asn1/t_bitst.c
+++ /dev/null
@@ -1,102 +0,0 @@
-/* t_bitst.c */
-/* Written by Dr Stephen N Henson (shenson@bigfoot.com) for the OpenSSL
- * project 1999.
- */
-/* ====================================================================
- * Copyright (c) 1999 The OpenSSL Project.  All rights reserved.
- *
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions
- * are met:
- *
- * 1. Redistributions of source code must retain the above copyright
- *    notice, this list of conditions and the following disclaimer. 
- *
- * 2. Redistributions in binary form must reproduce the above copyright
- *    notice, this list of conditions and the following disclaimer in
- *    the documentation and/or other materials provided with the
- *    distribution.
- *
- * 3. All advertising materials mentioning features or use of this
- *    software must display the following acknowledgment:
- *    "This product includes software developed by the OpenSSL Project
- *    for use in the OpenSSL Toolkit. (http://www.OpenSSL.org/)"
- *
- * 4. The names "OpenSSL Toolkit" and "OpenSSL Project" must not be used to
- *    endorse or promote products derived from this software without
- *    prior written permission. For written permission, please contact
- *    licensing@OpenSSL.org.
- *
- * 5. Products derived from this software may not be called "OpenSSL"
- *    nor may "OpenSSL" appear in their names without prior written
- *    permission of the OpenSSL Project.
- *
- * 6. Redistributions of any form whatsoever must retain the following
- *    acknowledgment:
- *    "This product includes software developed by the OpenSSL Project
- *    for use in the OpenSSL Toolkit (http://www.OpenSSL.org/)"
- *
- * THIS SOFTWARE IS PROVIDED BY THE OpenSSL PROJECT ``AS IS'' AND ANY
- * EXPRESSED OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
- * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR
- * PURPOSE ARE DISCLAIMED.  IN NO EVENT SHALL THE OpenSSL PROJECT OR
- * ITS CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
- * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
- * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
- * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
- * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
- * STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
- * ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED
- * OF THE POSSIBILITY OF SUCH DAMAGE.
- * ====================================================================
- *
- * This product includes cryptographic software written by Eric Young
- * (eay@cryptsoft.com).  This product includes software written by Tim
- * Hudson (tjh@cryptsoft.com).
- *
- */
-
-#include <stdio.h>
-#include "cryptlib.h"
-#include <openssl/conf.h>
-#include <openssl/x509v3.h>
-
-int ASN1_BIT_STRING_name_print(BIO *out, ASN1_BIT_STRING *bs,
-				BIT_STRING_BITNAME *tbl, int indent)
-{
-	BIT_STRING_BITNAME *bnam;
-	char first = 1;
-	BIO_printf(out, "%*s", indent, "");
-	for(bnam = tbl; bnam->lname; bnam++) {
-		if(ASN1_BIT_STRING_get_bit(bs, bnam->bitnum)) {
-			if(!first) BIO_puts(out, ", ");
-			BIO_puts(out, bnam->lname);
-			first = 0;
-		}
-	}
-	BIO_puts(out, "\n");
-	return 1;
-}
-
-int ASN1_BIT_STRING_set_asc(ASN1_BIT_STRING *bs, char *name, int value,
-				BIT_STRING_BITNAME *tbl)
-{
-	int bitnum;
-	bitnum = ASN1_BIT_STRING_num_asc(name, tbl);
-	if(bitnum < 0) return 0;
-	if(bs) {
-		if(!ASN1_BIT_STRING_set_bit(bs, bitnum, value))
-			return 0;
-	}
-	return 1;
-}
-
-int ASN1_BIT_STRING_num_asc(char *name, BIT_STRING_BITNAME *tbl)
-{
-	BIT_STRING_BITNAME *bnam;
-	for(bnam = tbl; bnam->lname; bnam++) {
-		if(!strcmp(bnam->sname, name) ||
-			!strcmp(bnam->lname, name) ) return bnam->bitnum;
-	}
-	return -1;
-}
diff --git a/crypto/openssl/crypto/asn1/t_crl.c b/crypto/openssl/crypto/asn1/t_crl.c
deleted file mode 100644
index 929b3e590438..000000000000
--- a/crypto/openssl/crypto/asn1/t_crl.c
+++ /dev/null
@@ -1,134 +0,0 @@
-/* t_crl.c */
-/* Written by Dr Stephen N Henson (shenson@bigfoot.com) for the OpenSSL
- * project 1999.
- */
-/* ====================================================================
- * Copyright (c) 1999 The OpenSSL Project.  All rights reserved.
- *
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions
- * are met:
- *
- * 1. Redistributions of source code must retain the above copyright
- *    notice, this list of conditions and the following disclaimer. 
- *
- * 2. Redistributions in binary form must reproduce the above copyright
- *    notice, this list of conditions and the following disclaimer in
- *    the documentation and/or other materials provided with the
- *    distribution.
- *
- * 3. All advertising materials mentioning features or use of this
- *    software must display the following acknowledgment:
- *    "This product includes software developed by the OpenSSL Project
- *    for use in the OpenSSL Toolkit. (http://www.OpenSSL.org/)"
- *
- * 4. The names "OpenSSL Toolkit" and "OpenSSL Project" must not be used to
- *    endorse or promote products derived from this software without
- *    prior written permission. For written permission, please contact
- *    licensing@OpenSSL.org.
- *
- * 5. Products derived from this software may not be called "OpenSSL"
- *    nor may "OpenSSL" appear in their names without prior written
- *    permission of the OpenSSL Project.
- *
- * 6. Redistributions of any form whatsoever must retain the following
- *    acknowledgment:
- *    "This product includes software developed by the OpenSSL Project
- *    for use in the OpenSSL Toolkit (http://www.OpenSSL.org/)"
- *
- * THIS SOFTWARE IS PROVIDED BY THE OpenSSL PROJECT ``AS IS'' AND ANY
- * EXPRESSED OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
- * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR
- * PURPOSE ARE DISCLAIMED.  IN NO EVENT SHALL THE OpenSSL PROJECT OR
- * ITS CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
- * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
- * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
- * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
- * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
- * STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
- * ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED
- * OF THE POSSIBILITY OF SUCH DAMAGE.
- * ====================================================================
- *
- * This product includes cryptographic software written by Eric Young
- * (eay@cryptsoft.com).  This product includes software written by Tim
- * Hudson (tjh@cryptsoft.com).
- *
- */
-
-#include <stdio.h>
-#include "cryptlib.h"
-#include <openssl/buffer.h>
-#include <openssl/bn.h>
-#include <openssl/objects.h>
-#include <openssl/x509.h>
-#include <openssl/x509v3.h>
-
-#ifndef OPENSSL_NO_FP_API
-int X509_CRL_print_fp(FILE *fp, X509_CRL *x)
-        {
-        BIO *b;
-        int ret;
-
-        if ((b=BIO_new(BIO_s_file())) == NULL)
-		{
-		X509err(X509_F_X509_CRL_PRINT_FP,ERR_R_BUF_LIB);
-                return(0);
-		}
-        BIO_set_fp(b,fp,BIO_NOCLOSE);
-        ret=X509_CRL_print(b, x);
-        BIO_free(b);
-        return(ret);
-        }
-#endif
-
-int X509_CRL_print(BIO *out, X509_CRL *x)
-{
-	STACK_OF(X509_REVOKED) *rev;
-	X509_REVOKED *r;
-	long l;
-	int i, n;
-	char *p;
-
-	BIO_printf(out, "Certificate Revocation List (CRL):\n");
-	l = X509_CRL_get_version(x);
-	BIO_printf(out, "%8sVersion %lu (0x%lx)\n", "", l+1, l);
-	i = OBJ_obj2nid(x->sig_alg->algorithm);
-	BIO_printf(out, "%8sSignature Algorithm: %s\n", "",
-				 (i == NID_undef) ? "NONE" : OBJ_nid2ln(i));
-	p=X509_NAME_oneline(X509_CRL_get_issuer(x),NULL,0);
-	BIO_printf(out,"%8sIssuer: %s\n","",p);
-	OPENSSL_free(p);
-	BIO_printf(out,"%8sLast Update: ","");
-	ASN1_TIME_print(out,X509_CRL_get_lastUpdate(x));
-	BIO_printf(out,"\n%8sNext Update: ","");
-	if (X509_CRL_get_nextUpdate(x))
-		 ASN1_TIME_print(out,X509_CRL_get_nextUpdate(x));
-	else BIO_printf(out,"NONE");
-	BIO_printf(out,"\n");
-
-	n=X509_CRL_get_ext_count(x);
-	X509V3_extensions_print(out, "CRL extensions",
-						x->crl->extensions, 0, 8);
-
-	rev = X509_CRL_get_REVOKED(x);
-
-	if(sk_X509_REVOKED_num(rev) > 0)
-	    BIO_printf(out, "Revoked Certificates:\n");
-	else BIO_printf(out, "No Revoked Certificates.\n");
-
-	for(i = 0; i < sk_X509_REVOKED_num(rev); i++) {
-		r = sk_X509_REVOKED_value(rev, i);
-		BIO_printf(out,"    Serial Number: ");
-		i2a_ASN1_INTEGER(out,r->serialNumber);
-		BIO_printf(out,"\n        Revocation Date: ");
-		ASN1_TIME_print(out,r->revocationDate);
-		BIO_printf(out,"\n");
-		X509V3_extensions_print(out, "CRL entry extensions",
-						r->extensions, 0, 8);
-	}
-	X509_signature_print(out, x->sig_alg, x->signature);
-
-	return 1;
-
-}
diff --git a/crypto/openssl/crypto/asn1/t_pkey.c b/crypto/openssl/crypto/asn1/t_pkey.c
deleted file mode 100644
index afb95d67121a..000000000000
--- a/crypto/openssl/crypto/asn1/t_pkey.c
+++ /dev/null
@@ -1,839 +0,0 @@
-/* crypto/asn1/t_pkey.c */
-/* Copyright (C) 1995-1998 Eric Young (eay@cryptsoft.com)
- * All rights reserved.
- *
- * This package is an SSL implementation written
- * by Eric Young (eay@cryptsoft.com).
- * The implementation was written so as to conform with Netscapes SSL.
- * 
- * This library is free for commercial and non-commercial use as long as
- * the following conditions are aheared to.  The following conditions
- * apply to all code found in this distribution, be it the RC4, RSA,
- * lhash, DES, etc., code; not just the SSL code.  The SSL documentation
- * included with this distribution is covered by the same copyright terms
- * except that the holder is Tim Hudson (tjh@cryptsoft.com).
- * 
- * Copyright remains Eric Young's, and as such any Copyright notices in
- * the code are not to be removed.
- * If this package is used in a product, Eric Young should be given attribution
- * as the author of the parts of the library used.
- * This can be in the form of a textual message at program startup or
- * in documentation (online or textual) provided with the package.
- * 
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions
- * are met:
- * 1. Redistributions of source code must retain the copyright
- *    notice, this list of conditions and the following disclaimer.
- * 2. Redistributions in binary form must reproduce the above copyright
- *    notice, this list of conditions and the following disclaimer in the
- *    documentation and/or other materials provided with the distribution.
- * 3. All advertising materials mentioning features or use of this software
- *    must display the following acknowledgement:
- *    "This product includes cryptographic software written by
- *     Eric Young (eay@cryptsoft.com)"
- *    The word 'cryptographic' can be left out if the rouines from the library
- *    being used are not cryptographic related :-).
- * 4. If you include any Windows specific code (or a derivative thereof) from 
- *    the apps directory (application code) you must include an acknowledgement:
- *    "This product includes software written by Tim Hudson (tjh@cryptsoft.com)"
- * 
- * THIS SOFTWARE IS PROVIDED BY ERIC YOUNG ``AS IS'' AND
- * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
- * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
- * ARE DISCLAIMED.  IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE
- * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
- * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
- * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
- * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
- * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
- * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
- * SUCH DAMAGE.
- * 
- * The licence and distribution terms for any publically available version or
- * derivative of this code cannot be changed.  i.e. this code cannot simply be
- * copied and put under another distribution licence
- * [including the GNU Public Licence.]
- */
-/* ====================================================================
- * Copyright 2002 Sun Microsystems, Inc. ALL RIGHTS RESERVED.
- * Binary polynomial ECC support in OpenSSL originally developed by 
- * SUN MICROSYSTEMS, INC., and contributed to the OpenSSL project.
- */
-
-#include <stdio.h>
-#include "cryptlib.h"
-#include <openssl/objects.h>
-#include <openssl/buffer.h>
-#include <openssl/bn.h>
-#ifndef OPENSSL_NO_RSA
-#include <openssl/rsa.h>
-#endif
-#ifndef OPENSSL_NO_DH
-#include <openssl/dh.h>
-#endif
-#ifndef OPENSSL_NO_DSA
-#include <openssl/dsa.h>
-#endif
-#ifndef OPENSSL_NO_EC
-#include <openssl/ec.h>
-#endif
-
-static int print(BIO *fp,const char *str, const BIGNUM *num,
-		unsigned char *buf,int off);
-#ifndef OPENSSL_NO_EC
-static int print_bin(BIO *fp, const char *str, const unsigned char *num,
-		size_t len, int off);
-#endif
-#ifndef OPENSSL_NO_RSA
-#ifndef OPENSSL_NO_FP_API
-int RSA_print_fp(FILE *fp, const RSA *x, int off)
-	{
-	BIO *b;
-	int ret;
-
-	if ((b=BIO_new(BIO_s_file())) == NULL)
-		{
-		RSAerr(RSA_F_RSA_PRINT_FP,ERR_R_BUF_LIB);
-		return(0);
-		}
-	BIO_set_fp(b,fp,BIO_NOCLOSE);
-	ret=RSA_print(b,x,off);
-	BIO_free(b);
-	return(ret);
-	}
-#endif
-
-int RSA_print(BIO *bp, const RSA *x, int off)
-	{
-	char str[128];
-	const char *s;
-	unsigned char *m=NULL;
-	int ret=0, mod_len = 0;
-	size_t buf_len=0, i;
-
-	if (x->n)
-		buf_len = (size_t)BN_num_bytes(x->n);
-	if (x->e)
-		if (buf_len < (i = (size_t)BN_num_bytes(x->e)))
-			buf_len = i;
-	if (x->d)
-		if (buf_len < (i = (size_t)BN_num_bytes(x->d)))
-			buf_len = i;
-	if (x->p)
-		if (buf_len < (i = (size_t)BN_num_bytes(x->p)))
-			buf_len = i;
-	if (x->q)
-		if (buf_len < (i = (size_t)BN_num_bytes(x->q)))
-			buf_len = i;
-	if (x->dmp1)
-		if (buf_len < (i = (size_t)BN_num_bytes(x->dmp1)))
-			buf_len = i;
-	if (x->dmq1)
-		if (buf_len < (i = (size_t)BN_num_bytes(x->dmq1)))
-			buf_len = i;
-	if (x->iqmp)
-		if (buf_len < (i = (size_t)BN_num_bytes(x->iqmp)))
-			buf_len = i;
-
-	m=(unsigned char *)OPENSSL_malloc(buf_len+10);
-	if (m == NULL)
-		{
-		RSAerr(RSA_F_RSA_PRINT,ERR_R_MALLOC_FAILURE);
-		goto err;
-		}
-
-	if (x->n != NULL)
-		mod_len = BN_num_bits(x->n);
-
-	if (x->d != NULL)
-		{
-		if(!BIO_indent(bp,off,128))
-		   goto err;
-		if (BIO_printf(bp,"Private-Key: (%d bit)\n", mod_len)
-			<= 0) goto err;
-		}
-
-	if (x->d == NULL)
-		BIO_snprintf(str,sizeof str,"Modulus (%d bit):", mod_len);
-	else
-		BUF_strlcpy(str,"modulus:",sizeof str);
-	if (!print(bp,str,x->n,m,off)) goto err;
-	s=(x->d == NULL)?"Exponent:":"publicExponent:";
-	if ((x->e != NULL) && !print(bp,s,x->e,m,off))
-		goto err;
-	if ((x->d != NULL) && !print(bp,"privateExponent:",x->d,m,off))
-		goto err;
-	if ((x->p != NULL) && !print(bp,"prime1:",x->p,m,off))
-		goto err;
-	if ((x->q != NULL) && !print(bp,"prime2:",x->q,m,off))
-		goto err;
-	if ((x->dmp1 != NULL) && !print(bp,"exponent1:",x->dmp1,m,off))
-		goto err;
-	if ((x->dmq1 != NULL) && !print(bp,"exponent2:",x->dmq1,m,off))
-		goto err;
-	if ((x->iqmp != NULL) && !print(bp,"coefficient:",x->iqmp,m,off))
-		goto err;
-	ret=1;
-err:
-	if (m != NULL) OPENSSL_free(m);
-	return(ret);
-	}
-#endif /* OPENSSL_NO_RSA */
-
-#ifndef OPENSSL_NO_DSA
-#ifndef OPENSSL_NO_FP_API
-int DSA_print_fp(FILE *fp, const DSA *x, int off)
-	{
-	BIO *b;
-	int ret;
-
-	if ((b=BIO_new(BIO_s_file())) == NULL)
-		{
-		DSAerr(DSA_F_DSA_PRINT_FP,ERR_R_BUF_LIB);
-		return(0);
-		}
-	BIO_set_fp(b,fp,BIO_NOCLOSE);
-	ret=DSA_print(b,x,off);
-	BIO_free(b);
-	return(ret);
-	}
-#endif
-
-int DSA_print(BIO *bp, const DSA *x, int off)
-	{
-	unsigned char *m=NULL;
-	int ret=0;
-	size_t buf_len=0,i;
-
-	if (x->p)
-		buf_len = (size_t)BN_num_bytes(x->p);
-	else
-		{
-		DSAerr(DSA_F_DSA_PRINT,DSA_R_MISSING_PARAMETERS);
-		goto err;
-		}
-	if (x->q)
-		if (buf_len < (i = (size_t)BN_num_bytes(x->q)))
-			buf_len = i;
-	if (x->g)
-		if (buf_len < (i = (size_t)BN_num_bytes(x->g)))
-			buf_len = i;
-	if (x->priv_key)
-		if (buf_len < (i = (size_t)BN_num_bytes(x->priv_key)))
-			buf_len = i;
-	if (x->pub_key)
-		if (buf_len < (i = (size_t)BN_num_bytes(x->pub_key)))
-			buf_len = i;
-
-	m=(unsigned char *)OPENSSL_malloc(buf_len+10);
-	if (m == NULL)
-		{
-		DSAerr(DSA_F_DSA_PRINT,ERR_R_MALLOC_FAILURE);
-		goto err;
-		}
-
-	if (x->priv_key != NULL)
-		{
-		if(!BIO_indent(bp,off,128))
-		   goto err;
-		if (BIO_printf(bp,"Private-Key: (%d bit)\n",BN_num_bits(x->p))
-			<= 0) goto err;
-		}
-
-	if ((x->priv_key != NULL) && !print(bp,"priv:",x->priv_key,m,off))
-		goto err;
-	if ((x->pub_key  != NULL) && !print(bp,"pub: ",x->pub_key,m,off))
-		goto err;
-	if ((x->p != NULL) && !print(bp,"P:   ",x->p,m,off)) goto err;
-	if ((x->q != NULL) && !print(bp,"Q:   ",x->q,m,off)) goto err;
-	if ((x->g != NULL) && !print(bp,"G:   ",x->g,m,off)) goto err;
-	ret=1;
-err:
-	if (m != NULL) OPENSSL_free(m);
-	return(ret);
-	}
-#endif /* !OPENSSL_NO_DSA */
-
-#ifndef OPENSSL_NO_EC
-#ifndef OPENSSL_NO_FP_API
-int ECPKParameters_print_fp(FILE *fp, const EC_GROUP *x, int off)
-	{
-	BIO *b;
-	int ret;
-
-	if ((b=BIO_new(BIO_s_file())) == NULL)
-		{
-		ECerr(EC_F_ECPKPARAMETERS_PRINT_FP,ERR_R_BUF_LIB);
-		return(0);
-		}
-	BIO_set_fp(b, fp, BIO_NOCLOSE);
-	ret = ECPKParameters_print(b, x, off);
-	BIO_free(b);
-	return(ret);
-	}
-
-int EC_KEY_print_fp(FILE *fp, const EC_KEY *x, int off)
-	{
-	BIO *b;
-	int ret;
- 
-	if ((b=BIO_new(BIO_s_file())) == NULL)
-		{
-		ECerr(EC_F_EC_KEY_PRINT_FP, ERR_R_BIO_LIB);
-		return(0);
-		}
-	BIO_set_fp(b, fp, BIO_NOCLOSE);
-	ret = EC_KEY_print(b, x, off);
-	BIO_free(b);
-	return(ret);
-	}
-#endif
-
-int ECPKParameters_print(BIO *bp, const EC_GROUP *x, int off)
-	{
-	unsigned char *buffer=NULL;
-	size_t	buf_len=0, i;
-	int     ret=0, reason=ERR_R_BIO_LIB;
-	BN_CTX  *ctx=NULL;
-	const EC_POINT *point=NULL;
-	BIGNUM	*p=NULL, *a=NULL, *b=NULL, *gen=NULL,
-		*order=NULL, *cofactor=NULL;
-	const unsigned char *seed;
-	size_t	seed_len=0;
-	
-	static const char *gen_compressed = "Generator (compressed):";
-	static const char *gen_uncompressed = "Generator (uncompressed):";
-	static const char *gen_hybrid = "Generator (hybrid):";
- 
-	if (!x)
-		{
-		reason = ERR_R_PASSED_NULL_PARAMETER;
-		goto err;
-		}
-
-	if (EC_GROUP_get_asn1_flag(x))
-		{
-		/* the curve parameter are given by an asn1 OID */
-		int nid;
-
-		if (!BIO_indent(bp, off, 128))
-			goto err;
-
-		nid = EC_GROUP_get_curve_name(x);
-		if (nid == 0)
-			goto err;
-
-		if (BIO_printf(bp, "ASN1 OID: %s", OBJ_nid2sn(nid)) <= 0)
-			goto err;
-		if (BIO_printf(bp, "\n") <= 0)
-			goto err;
-		}
-	else
-		{
-		/* explicit parameters */
-		int is_char_two = 0;
-		point_conversion_form_t form;
-		int tmp_nid = EC_METHOD_get_field_type(EC_GROUP_method_of(x));
-
-		if (tmp_nid == NID_X9_62_characteristic_two_field)
-			is_char_two = 1;
-
-		if ((p = BN_new()) == NULL || (a = BN_new()) == NULL ||
-			(b = BN_new()) == NULL || (order = BN_new()) == NULL ||
-			(cofactor = BN_new()) == NULL)
-			{
-			reason = ERR_R_MALLOC_FAILURE;
-			goto err;
-			}
-
-		if (is_char_two)
-			{
-			if (!EC_GROUP_get_curve_GF2m(x, p, a, b, ctx))
-				{
-				reason = ERR_R_EC_LIB;
-				goto err;
-				}
-			}
-		else /* prime field */
-			{
-			if (!EC_GROUP_get_curve_GFp(x, p, a, b, ctx))
-				{
-				reason = ERR_R_EC_LIB;
-				goto err;
-				}
-			}
-
-		if ((point = EC_GROUP_get0_generator(x)) == NULL)
-			{
-			reason = ERR_R_EC_LIB;
-			goto err;
-			}
-		if (!EC_GROUP_get_order(x, order, NULL) || 
-            		!EC_GROUP_get_cofactor(x, cofactor, NULL))
-			{
-			reason = ERR_R_EC_LIB;
-			goto err;
-			}
-		
-		form = EC_GROUP_get_point_conversion_form(x);
-
-		if ((gen = EC_POINT_point2bn(x, point, 
-				form, NULL, ctx)) == NULL)
-			{
-			reason = ERR_R_EC_LIB;
-			goto err;
-			}
-
-		buf_len = (size_t)BN_num_bytes(p);
-		if (buf_len < (i = (size_t)BN_num_bytes(a)))
-			buf_len = i;
-		if (buf_len < (i = (size_t)BN_num_bytes(b)))
-			buf_len = i;
-		if (buf_len < (i = (size_t)BN_num_bytes(gen)))
-			buf_len = i;
-		if (buf_len < (i = (size_t)BN_num_bytes(order)))
-			buf_len = i;
-		if (buf_len < (i = (size_t)BN_num_bytes(cofactor))) 
-			buf_len = i;
-
-		if ((seed = EC_GROUP_get0_seed(x)) != NULL)
-			seed_len = EC_GROUP_get_seed_len(x);
-
-		buf_len += 10;
-		if ((buffer = OPENSSL_malloc(buf_len)) == NULL)
-			{
-			reason = ERR_R_MALLOC_FAILURE;
-			goto err;
-			}
-
-		if (!BIO_indent(bp, off, 128))
-			goto err;
-
-		/* print the 'short name' of the field type */
-		if (BIO_printf(bp, "Field Type: %s\n", OBJ_nid2sn(tmp_nid))
-			<= 0)
-			goto err;  
-
-		if (is_char_two)
-			{
-			/* print the 'short name' of the base type OID */
-			int basis_type = EC_GROUP_get_basis_type(x);
-			if (basis_type == 0)
-				goto err;
-
-			if (!BIO_indent(bp, off, 128))
-				goto err;
-
-			if (BIO_printf(bp, "Basis Type: %s\n", 
-				OBJ_nid2sn(basis_type)) <= 0)
-				goto err;
-
-			/* print the polynomial */
-			if ((p != NULL) && !print(bp, "Polynomial:", p, buffer,
-				off))
-				goto err;
-			}
-		else
-			{
-			if ((p != NULL) && !print(bp, "Prime:", p, buffer,off))
-				goto err;
-			}
-		if ((a != NULL) && !print(bp, "A:   ", a, buffer, off)) 
-			goto err;
-		if ((b != NULL) && !print(bp, "B:   ", b, buffer, off))
-			goto err;
-		if (form == POINT_CONVERSION_COMPRESSED)
-			{
-			if ((gen != NULL) && !print(bp, gen_compressed, gen,
-				buffer, off))
-				goto err;
-			}
-		else if (form == POINT_CONVERSION_UNCOMPRESSED)
-			{
-			if ((gen != NULL) && !print(bp, gen_uncompressed, gen,
-				buffer, off))
-				goto err;
-			}
-		else /* form == POINT_CONVERSION_HYBRID */
-			{
-			if ((gen != NULL) && !print(bp, gen_hybrid, gen,
-				buffer, off))
-				goto err;
-			}
-		if ((order != NULL) && !print(bp, "Order: ", order, 
-			buffer, off)) goto err;
-		if ((cofactor != NULL) && !print(bp, "Cofactor: ", cofactor, 
-			buffer, off)) goto err;
-		if (seed && !print_bin(bp, "Seed:", seed, seed_len, off))
-			goto err;
-		}
-	ret=1;
-err:
-	if (!ret)
- 		ECerr(EC_F_ECPKPARAMETERS_PRINT, reason);
-	if (p) 
-		BN_free(p);
-	if (a) 
-		BN_free(a);
-	if (b)
-		BN_free(b);
-	if (gen)
-		BN_free(gen);
-	if (order)
-		BN_free(order);
-	if (cofactor)
-		BN_free(cofactor);
-	if (ctx)
-		BN_CTX_free(ctx);
-	if (buffer != NULL) 
-		OPENSSL_free(buffer);
-	return(ret);	
-	}
-
-int EC_KEY_print(BIO *bp, const EC_KEY *x, int off)
-	{
-	unsigned char *buffer=NULL;
-	size_t	buf_len=0, i;
-	int     ret=0, reason=ERR_R_BIO_LIB;
-	BIGNUM  *pub_key=NULL, *order=NULL;
-	BN_CTX  *ctx=NULL;
-	const EC_GROUP *group;
-	const EC_POINT *public_key;
-	const BIGNUM *priv_key;
- 
-	if (x == NULL || (group = EC_KEY_get0_group(x)) == NULL)
-		{
-		reason = ERR_R_PASSED_NULL_PARAMETER;
-		goto err;
-		}
-
-	public_key = EC_KEY_get0_public_key(x);
-	if ((pub_key = EC_POINT_point2bn(group, public_key,
-		EC_KEY_get_conv_form(x), NULL, ctx)) == NULL)
-		{
-		reason = ERR_R_EC_LIB;
-		goto err;
-		}
-
-	buf_len = (size_t)BN_num_bytes(pub_key);
-	priv_key = EC_KEY_get0_private_key(x);
-	if (priv_key != NULL)
-		{
-		if ((i = (size_t)BN_num_bytes(priv_key)) > buf_len)
-			buf_len = i;
-		}
-
-	buf_len += 10;
-	if ((buffer = OPENSSL_malloc(buf_len)) == NULL)
-		{
-		reason = ERR_R_MALLOC_FAILURE;
-		goto err;
-		}
-
-	if (priv_key != NULL)
-		{
-		if (!BIO_indent(bp, off, 128))
-			goto err;
-		if ((order = BN_new()) == NULL)
-			goto err;
-		if (!EC_GROUP_get_order(group, order, NULL))
-			goto err;
-		if (BIO_printf(bp, "Private-Key: (%d bit)\n", 
-			BN_num_bits(order)) <= 0) goto err;
-		}
-  
-	if ((priv_key != NULL) && !print(bp, "priv:", priv_key, 
-		buffer, off))
-		goto err;
-	if ((pub_key != NULL) && !print(bp, "pub: ", pub_key,
-		buffer, off))
-		goto err;
-	if (!ECPKParameters_print(bp, group, off))
-		goto err;
-	ret=1;
-err:
-	if (!ret)
- 		ECerr(EC_F_EC_KEY_PRINT, reason);
-	if (pub_key) 
-		BN_free(pub_key);
-	if (order)
-		BN_free(order);
-	if (ctx)
-		BN_CTX_free(ctx);
-	if (buffer != NULL)
-		OPENSSL_free(buffer);
-	return(ret);
-	}
-#endif /* OPENSSL_NO_EC */
-
-static int print(BIO *bp, const char *number, const BIGNUM *num, unsigned char *buf,
-	     int off)
-	{
-	int n,i;
-	const char *neg;
-
-	if (num == NULL) return(1);
-	neg = (BN_is_negative(num))?"-":"";
-	if(!BIO_indent(bp,off,128))
-		return 0;
-	if (BN_is_zero(num))
-		{
-		if (BIO_printf(bp, "%s 0\n", number) <= 0)
-			return 0;
-		return 1;
-		}
-
-	if (BN_num_bytes(num) <= BN_BYTES)
-		{
-		if (BIO_printf(bp,"%s %s%lu (%s0x%lx)\n",number,neg,
-			(unsigned long)num->d[0],neg,(unsigned long)num->d[0])
-			<= 0) return(0);
-		}
-	else
-		{
-		buf[0]=0;
-		if (BIO_printf(bp,"%s%s",number,
-			(neg[0] == '-')?" (Negative)":"") <= 0)
-			return(0);
-		n=BN_bn2bin(num,&buf[1]);
-	
-		if (buf[1] & 0x80)
-			n++;
-		else	buf++;
-
-		for (i=0; i<n; i++)
-			{
-			if ((i%15) == 0)
-				{
-				if(BIO_puts(bp,"\n") <= 0
-				   || !BIO_indent(bp,off+4,128))
-				    return 0;
-				}
-			if (BIO_printf(bp,"%02x%s",buf[i],((i+1) == n)?"":":")
-				<= 0) return(0);
-			}
-		if (BIO_write(bp,"\n",1) <= 0) return(0);
-		}
-	return(1);
-	}
-
-#ifndef OPENSSL_NO_EC
-static int print_bin(BIO *fp, const char *name, const unsigned char *buf,
-		size_t len, int off)
-	{
-	size_t i;
-	char str[128];
-
-	if (buf == NULL)
-		return 1;
-	if (off)
-		{
-		if (off > 128)
-			off=128;
-		memset(str,' ',off);
-		if (BIO_write(fp, str, off) <= 0)
-			return 0;
-		}
-
-	if (BIO_printf(fp,"%s", name) <= 0)
-		return 0;
-
-	for (i=0; i<len; i++)
-		{
-		if ((i%15) == 0)
-			{
-			str[0]='\n';
-			memset(&(str[1]),' ',off+4);
-			if (BIO_write(fp, str, off+1+4) <= 0)
-				return 0;
-			}
-		if (BIO_printf(fp,"%02x%s",buf[i],((i+1) == len)?"":":") <= 0)
-			return 0;
-		}
-	if (BIO_write(fp,"\n",1) <= 0)
-		return 0;
-
-	return 1;
-	}
-#endif
-
-#ifndef OPENSSL_NO_DH
-#ifndef OPENSSL_NO_FP_API
-int DHparams_print_fp(FILE *fp, const DH *x)
-	{
-	BIO *b;
-	int ret;
-
-	if ((b=BIO_new(BIO_s_file())) == NULL)
-		{
-		DHerr(DH_F_DHPARAMS_PRINT_FP,ERR_R_BUF_LIB);
-		return(0);
-		}
-	BIO_set_fp(b,fp,BIO_NOCLOSE);
-	ret=DHparams_print(b, x);
-	BIO_free(b);
-	return(ret);
-	}
-#endif
-
-int DHparams_print(BIO *bp, const DH *x)
-	{
-	unsigned char *m=NULL;
-	int reason=ERR_R_BUF_LIB,ret=0;
-	size_t buf_len=0, i;
-
-	if (x->p)
-		buf_len = (size_t)BN_num_bytes(x->p);
-	else
-		{
-		reason = ERR_R_PASSED_NULL_PARAMETER;
-		goto err;
-		}
-	if (x->g)
-		if (buf_len < (i = (size_t)BN_num_bytes(x->g)))
-			buf_len = i;
-	m=(unsigned char *)OPENSSL_malloc(buf_len+10);
-	if (m == NULL)
-		{
-		reason=ERR_R_MALLOC_FAILURE;
-		goto err;
-		}
-
-	if (BIO_printf(bp,"Diffie-Hellman-Parameters: (%d bit)\n",
-		BN_num_bits(x->p)) <= 0)
-		goto err;
-	if (!print(bp,"prime:",x->p,m,4)) goto err;
-	if (!print(bp,"generator:",x->g,m,4)) goto err;
-	if (x->length != 0)
-		{
-		if (BIO_printf(bp,"    recommended-private-length: %d bits\n",
-			(int)x->length) <= 0) goto err;
-		}
-	ret=1;
-	if (0)
-		{
-err:
-		DHerr(DH_F_DHPARAMS_PRINT,reason);
-		}
-	if (m != NULL) OPENSSL_free(m);
-	return(ret);
-	}
-#endif
-
-#ifndef OPENSSL_NO_DSA
-#ifndef OPENSSL_NO_FP_API
-int DSAparams_print_fp(FILE *fp, const DSA *x)
-	{
-	BIO *b;
-	int ret;
-
-	if ((b=BIO_new(BIO_s_file())) == NULL)
-		{
-		DSAerr(DSA_F_DSAPARAMS_PRINT_FP,ERR_R_BUF_LIB);
-		return(0);
-		}
-	BIO_set_fp(b,fp,BIO_NOCLOSE);
-	ret=DSAparams_print(b, x);
-	BIO_free(b);
-	return(ret);
-	}
-#endif
-
-int DSAparams_print(BIO *bp, const DSA *x)
-	{
-	unsigned char *m=NULL;
-	int ret=0;
-	size_t buf_len=0,i;
-
-	if (x->p)
-		buf_len = (size_t)BN_num_bytes(x->p);
-	else
-		{
-		DSAerr(DSA_F_DSAPARAMS_PRINT,DSA_R_MISSING_PARAMETERS);
-		goto err;
-		}
-	if (x->q)
-		if (buf_len < (i = (size_t)BN_num_bytes(x->q)))
-			buf_len = i;
-	if (x->g)
-		if (buf_len < (i = (size_t)BN_num_bytes(x->g)))
-			buf_len = i;
-	m=(unsigned char *)OPENSSL_malloc(buf_len+10);
-	if (m == NULL)
-		{
-		DSAerr(DSA_F_DSAPARAMS_PRINT,ERR_R_MALLOC_FAILURE);
-		goto err;
-		}
-
-	if (BIO_printf(bp,"DSA-Parameters: (%d bit)\n",
-		BN_num_bits(x->p)) <= 0)
-		goto err;
-	if (!print(bp,"p:",x->p,m,4)) goto err;
-	if ((x->q != NULL) && !print(bp,"q:",x->q,m,4)) goto err;
-	if ((x->g != NULL) && !print(bp,"g:",x->g,m,4)) goto err;
-	ret=1;
-err:
-	if (m != NULL) OPENSSL_free(m);
-	return(ret);
-	}
-
-#endif /* !OPENSSL_NO_DSA */
-
-#ifndef OPENSSL_NO_EC
-#ifndef OPENSSL_NO_FP_API
-int ECParameters_print_fp(FILE *fp, const EC_KEY *x)
-	{
-	BIO *b;
-	int ret;
- 
-	if ((b=BIO_new(BIO_s_file())) == NULL)
-		{
-		ECerr(EC_F_ECPARAMETERS_PRINT_FP, ERR_R_BIO_LIB);
-		return(0);
-		}
-	BIO_set_fp(b, fp, BIO_NOCLOSE);
-	ret = ECParameters_print(b, x);
-	BIO_free(b);
-	return(ret);
-	}
-#endif
-
-int ECParameters_print(BIO *bp, const EC_KEY *x)
-	{
-	int     reason=ERR_R_EC_LIB, ret=0;
-	BIGNUM	*order=NULL;
-	const EC_GROUP *group;
- 
-	if (x == NULL || (group = EC_KEY_get0_group(x)) == NULL)
-		{
-		reason = ERR_R_PASSED_NULL_PARAMETER;;
-		goto err;
-		}
-
-	if ((order = BN_new()) == NULL)
-		{
-		reason = ERR_R_MALLOC_FAILURE;
-		goto err;
-		}
-
-	if (!EC_GROUP_get_order(group, order, NULL))
-		{
-		reason = ERR_R_EC_LIB;
-		goto err;
-		}
- 
-	if (BIO_printf(bp, "ECDSA-Parameters: (%d bit)\n", 
-		BN_num_bits(order)) <= 0)
-		goto err;
-	if (!ECPKParameters_print(bp, group, 4))
-		goto err;
-	ret=1;
-err:
-	if (order)
-		BN_free(order);
-	ECerr(EC_F_ECPARAMETERS_PRINT, reason);
-	return(ret);
-	}
-  
-#endif
diff --git a/crypto/openssl/crypto/asn1/t_req.c b/crypto/openssl/crypto/asn1/t_req.c
deleted file mode 100644
index c779a9bb1805..000000000000
--- a/crypto/openssl/crypto/asn1/t_req.c
+++ /dev/null
@@ -1,290 +0,0 @@
-/* crypto/asn1/t_req.c */
-/* Copyright (C) 1995-1998 Eric Young (eay@cryptsoft.com)
- * All rights reserved.
- *
- * This package is an SSL implementation written
- * by Eric Young (eay@cryptsoft.com).
- * The implementation was written so as to conform with Netscapes SSL.
- * 
- * This library is free for commercial and non-commercial use as long as
- * the following conditions are aheared to.  The following conditions
- * apply to all code found in this distribution, be it the RC4, RSA,
- * lhash, DES, etc., code; not just the SSL code.  The SSL documentation
- * included with this distribution is covered by the same copyright terms
- * except that the holder is Tim Hudson (tjh@cryptsoft.com).
- * 
- * Copyright remains Eric Young's, and as such any Copyright notices in
- * the code are not to be removed.
- * If this package is used in a product, Eric Young should be given attribution
- * as the author of the parts of the library used.
- * This can be in the form of a textual message at program startup or
- * in documentation (online or textual) provided with the package.
- * 
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions
- * are met:
- * 1. Redistributions of source code must retain the copyright
- *    notice, this list of conditions and the following disclaimer.
- * 2. Redistributions in binary form must reproduce the above copyright
- *    notice, this list of conditions and the following disclaimer in the
- *    documentation and/or other materials provided with the distribution.
- * 3. All advertising materials mentioning features or use of this software
- *    must display the following acknowledgement:
- *    "This product includes cryptographic software written by
- *     Eric Young (eay@cryptsoft.com)"
- *    The word 'cryptographic' can be left out if the rouines from the library
- *    being used are not cryptographic related :-).
- * 4. If you include any Windows specific code (or a derivative thereof) from 
- *    the apps directory (application code) you must include an acknowledgement:
- *    "This product includes software written by Tim Hudson (tjh@cryptsoft.com)"
- * 
- * THIS SOFTWARE IS PROVIDED BY ERIC YOUNG ``AS IS'' AND
- * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
- * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
- * ARE DISCLAIMED.  IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE
- * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
- * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
- * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
- * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
- * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
- * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
- * SUCH DAMAGE.
- * 
- * The licence and distribution terms for any publically available version or
- * derivative of this code cannot be changed.  i.e. this code cannot simply be
- * copied and put under another distribution licence
- * [including the GNU Public Licence.]
- */
-
-#include <stdio.h>
-#include "cryptlib.h"
-#include <openssl/buffer.h>
-#include <openssl/bn.h>
-#include <openssl/objects.h>
-#include <openssl/x509.h>
-#include <openssl/x509v3.h>
-#ifndef OPENSSL_NO_RSA
-#include <openssl/rsa.h>
-#endif
-#ifndef OPENSSL_NO_DSA
-#include <openssl/dsa.h>
-#endif
-
-#ifndef OPENSSL_NO_FP_API
-int X509_REQ_print_fp(FILE *fp, X509_REQ *x)
-        {
-        BIO *b;
-        int ret;
-
-        if ((b=BIO_new(BIO_s_file())) == NULL)
-		{
-		X509err(X509_F_X509_REQ_PRINT_FP,ERR_R_BUF_LIB);
-                return(0);
-		}
-        BIO_set_fp(b,fp,BIO_NOCLOSE);
-        ret=X509_REQ_print(b, x);
-        BIO_free(b);
-        return(ret);
-        }
-#endif
-
-int X509_REQ_print_ex(BIO *bp, X509_REQ *x, unsigned long nmflags, unsigned long cflag)
-	{
-	unsigned long l;
-	int i;
-	const char *neg;
-	X509_REQ_INFO *ri;
-	EVP_PKEY *pkey;
-	STACK_OF(X509_ATTRIBUTE) *sk;
-	STACK_OF(X509_EXTENSION) *exts;
-	char mlch = ' ';
-	int nmindent = 0;
-
-	if((nmflags & XN_FLAG_SEP_MASK) == XN_FLAG_SEP_MULTILINE) {
-		mlch = '\n';
-		nmindent = 12;
-	}
-
-	if(nmflags == X509_FLAG_COMPAT)
-		nmindent = 16;
-
-
-	ri=x->req_info;
-	if(!(cflag & X509_FLAG_NO_HEADER))
-		{
-		if (BIO_write(bp,"Certificate Request:\n",21) <= 0) goto err;
-		if (BIO_write(bp,"    Data:\n",10) <= 0) goto err;
-		}
-	if(!(cflag & X509_FLAG_NO_VERSION))
-		{
-		neg=(ri->version->type == V_ASN1_NEG_INTEGER)?"-":"";
-		l=0;
-		for (i=0; i<ri->version->length; i++)
-			{ l<<=8; l+=ri->version->data[i]; }
-		if(BIO_printf(bp,"%8sVersion: %s%lu (%s0x%lx)\n","",neg,l,neg,
-			      l) <= 0)
-		    goto err;
-		}
-        if(!(cflag & X509_FLAG_NO_SUBJECT))
-                {
-                if (BIO_printf(bp,"        Subject:%c",mlch) <= 0) goto err;
-                if (X509_NAME_print_ex(bp,ri->subject,nmindent, nmflags) < 0) goto err;
-                if (BIO_write(bp,"\n",1) <= 0) goto err;
-                }
-	if(!(cflag & X509_FLAG_NO_PUBKEY))
-		{
-		if (BIO_write(bp,"        Subject Public Key Info:\n",33) <= 0)
-			goto err;
-		if (BIO_printf(bp,"%12sPublic Key Algorithm: ","") <= 0)
-			goto err;
-		if (i2a_ASN1_OBJECT(bp, ri->pubkey->algor->algorithm) <= 0)
-			goto err;
-		if (BIO_puts(bp, "\n") <= 0)
-			goto err;
-
-		pkey=X509_REQ_get_pubkey(x);
-		if (pkey == NULL)
-			{
-			BIO_printf(bp,"%12sUnable to load Public Key\n","");
-			ERR_print_errors(bp);
-			}
-		else
-#ifndef OPENSSL_NO_RSA
-		if (pkey->type == EVP_PKEY_RSA)
-			{
-			BIO_printf(bp,"%12sRSA Public Key: (%d bit)\n","",
-			BN_num_bits(pkey->pkey.rsa->n));
-			RSA_print(bp,pkey->pkey.rsa,16);
-			}
-		else
-#endif
-#ifndef OPENSSL_NO_DSA
-		if (pkey->type == EVP_PKEY_DSA)
-			{
-			BIO_printf(bp,"%12sDSA Public Key:\n","");
-			DSA_print(bp,pkey->pkey.dsa,16);
-			}
-		else
-#endif
-#ifndef OPENSSL_NO_EC
-		if (pkey->type == EVP_PKEY_EC)
-		{
-			BIO_printf(bp, "%12sEC Public Key: \n","");
-			EC_KEY_print(bp, pkey->pkey.ec, 16);
-		}
-	else
-#endif
-			BIO_printf(bp,"%12sUnknown Public Key:\n","");
-
-		EVP_PKEY_free(pkey);
-		}
-
-	if(!(cflag & X509_FLAG_NO_ATTRIBUTES))
-		{
-		/* may not be */
-		if(BIO_printf(bp,"%8sAttributes:\n","") <= 0)
-		    goto err;
-
-		sk=x->req_info->attributes;
-		if (sk_X509_ATTRIBUTE_num(sk) == 0)
-			{
-			if(BIO_printf(bp,"%12sa0:00\n","") <= 0)
-			    goto err;
-			}
-		else
-			{
-			for (i=0; i<sk_X509_ATTRIBUTE_num(sk); i++)
-				{
-				ASN1_TYPE *at;
-				X509_ATTRIBUTE *a;
-				ASN1_BIT_STRING *bs=NULL;
-				ASN1_TYPE *t;
-				int j,type=0,count=1,ii=0;
-
-				a=sk_X509_ATTRIBUTE_value(sk,i);
-				if(X509_REQ_extension_nid(OBJ_obj2nid(a->object)))
-									continue;
-				if(BIO_printf(bp,"%12s","") <= 0)
-				    goto err;
-				if ((j=i2a_ASN1_OBJECT(bp,a->object)) > 0)
-				{
-				if (a->single)
-					{
-					t=a->value.single;
-					type=t->type;
-					bs=t->value.bit_string;
-					}
-				else
-					{
-					ii=0;
-					count=sk_ASN1_TYPE_num(a->value.set);
-get_next:
-					at=sk_ASN1_TYPE_value(a->value.set,ii);
-					type=at->type;
-					bs=at->value.asn1_string;
-					}
-				}
-				for (j=25-j; j>0; j--)
-					if (BIO_write(bp," ",1) != 1) goto err;
-				if (BIO_puts(bp,":") <= 0) goto err;
-				if (	(type == V_ASN1_PRINTABLESTRING) ||
-					(type == V_ASN1_T61STRING) ||
-					(type == V_ASN1_IA5STRING))
-					{
-					if (BIO_write(bp,(char *)bs->data,bs->length)
-						!= bs->length)
-						goto err;
-					BIO_puts(bp,"\n");
-					}
-				else
-					{
-					BIO_puts(bp,"unable to print attribute\n");
-					}
-				if (++ii < count) goto get_next;
-				}
-			}
-		}
-	if(!(cflag & X509_FLAG_NO_ATTRIBUTES))
-		{
-		exts = X509_REQ_get_extensions(x);
-		if(exts)
-			{
-			BIO_printf(bp,"%8sRequested Extensions:\n","");
-			for (i=0; i<sk_X509_EXTENSION_num(exts); i++)
-				{
-				ASN1_OBJECT *obj;
-				X509_EXTENSION *ex;
-				int j;
-				ex=sk_X509_EXTENSION_value(exts, i);
-				if (BIO_printf(bp,"%12s","") <= 0) goto err;
-				obj=X509_EXTENSION_get_object(ex);
-				i2a_ASN1_OBJECT(bp,obj);
-				j=X509_EXTENSION_get_critical(ex);
-				if (BIO_printf(bp,": %s\n",j?"critical":"") <= 0)
-					goto err;
-				if(!X509V3_EXT_print(bp, ex, 0, 16))
-					{
-					BIO_printf(bp, "%16s", "");
-					M_ASN1_OCTET_STRING_print(bp,ex->value);
-					}
-				if (BIO_write(bp,"\n",1) <= 0) goto err;
-				}
-			sk_X509_EXTENSION_pop_free(exts, X509_EXTENSION_free);
-			}
-		}
-
-	if(!(cflag & X509_FLAG_NO_SIGDUMP))
-		{
-		if(!X509_signature_print(bp, x->sig_alg, x->signature)) goto err;
-		}
-
-	return(1);
-err:
-	X509err(X509_F_X509_REQ_PRINT_EX,ERR_R_BUF_LIB);
-	return(0);
-	}
-
-int X509_REQ_print(BIO *bp, X509_REQ *x)
-	{
-	return X509_REQ_print_ex(bp, x, XN_FLAG_COMPAT, X509_FLAG_COMPAT);
-	}
diff --git a/crypto/openssl/crypto/asn1/t_spki.c b/crypto/openssl/crypto/asn1/t_spki.c
deleted file mode 100644
index c2a5797dd8bf..000000000000
--- a/crypto/openssl/crypto/asn1/t_spki.c
+++ /dev/null
@@ -1,132 +0,0 @@
-/* t_spki.c */
-/* Written by Dr Stephen N Henson (shenson@bigfoot.com) for the OpenSSL
- * project 1999.
- */
-/* ====================================================================
- * Copyright (c) 1999 The OpenSSL Project.  All rights reserved.
- *
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions
- * are met:
- *
- * 1. Redistributions of source code must retain the above copyright
- *    notice, this list of conditions and the following disclaimer. 
- *
- * 2. Redistributions in binary form must reproduce the above copyright
- *    notice, this list of conditions and the following disclaimer in
- *    the documentation and/or other materials provided with the
- *    distribution.
- *
- * 3. All advertising materials mentioning features or use of this
- *    software must display the following acknowledgment:
- *    "This product includes software developed by the OpenSSL Project
- *    for use in the OpenSSL Toolkit. (http://www.OpenSSL.org/)"
- *
- * 4. The names "OpenSSL Toolkit" and "OpenSSL Project" must not be used to
- *    endorse or promote products derived from this software without
- *    prior written permission. For written permission, please contact
- *    licensing@OpenSSL.org.
- *
- * 5. Products derived from this software may not be called "OpenSSL"
- *    nor may "OpenSSL" appear in their names without prior written
- *    permission of the OpenSSL Project.
- *
- * 6. Redistributions of any form whatsoever must retain the following
- *    acknowledgment:
- *    "This product includes software developed by the OpenSSL Project
- *    for use in the OpenSSL Toolkit (http://www.OpenSSL.org/)"
- *
- * THIS SOFTWARE IS PROVIDED BY THE OpenSSL PROJECT ``AS IS'' AND ANY
- * EXPRESSED OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
- * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR
- * PURPOSE ARE DISCLAIMED.  IN NO EVENT SHALL THE OpenSSL PROJECT OR
- * ITS CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
- * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
- * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
- * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
- * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
- * STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
- * ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED
- * OF THE POSSIBILITY OF SUCH DAMAGE.
- * ====================================================================
- *
- * This product includes cryptographic software written by Eric Young
- * (eay@cryptsoft.com).  This product includes software written by Tim
- * Hudson (tjh@cryptsoft.com).
- *
- */
-
-#include <stdio.h>
-#include "cryptlib.h"
-#include <openssl/x509.h>
-#include <openssl/asn1.h>
-#ifndef OPENSSL_NO_RSA
-#include <openssl/rsa.h>
-#endif
-#ifndef OPENSSL_NO_DSA
-#include <openssl/dsa.h>
-#endif
-#include <openssl/bn.h>
-
-/* Print out an SPKI */
-
-int NETSCAPE_SPKI_print(BIO *out, NETSCAPE_SPKI *spki)
-{
-	EVP_PKEY *pkey;
-	ASN1_IA5STRING *chal;
-	int i, n;
-	char *s;
-	BIO_printf(out, "Netscape SPKI:\n");
-	i=OBJ_obj2nid(spki->spkac->pubkey->algor->algorithm);
-	BIO_printf(out,"  Public Key Algorithm: %s\n",
-				(i == NID_undef)?"UNKNOWN":OBJ_nid2ln(i));
-	pkey = X509_PUBKEY_get(spki->spkac->pubkey);
-	if(!pkey) BIO_printf(out, "  Unable to load public key\n");
-	else {
-#ifndef OPENSSL_NO_RSA
-		if (pkey->type == EVP_PKEY_RSA)
-			{
-			BIO_printf(out,"  RSA Public Key: (%d bit)\n",
-				BN_num_bits(pkey->pkey.rsa->n));
-			RSA_print(out,pkey->pkey.rsa,2);
-			}
-		else 
-#endif
-#ifndef OPENSSL_NO_DSA
-		if (pkey->type == EVP_PKEY_DSA)
-		{
-		BIO_printf(out,"  DSA Public Key:\n");
-		DSA_print(out,pkey->pkey.dsa,2);
-		}
-		else
-#endif
-#ifndef OPENSSL_NO_EC
-		if (pkey->type == EVP_PKEY_EC)
-		{
-			BIO_printf(out, "  EC Public Key:\n");
-			EC_KEY_print(out, pkey->pkey.ec,2);
-		}
-		else
-#endif
-
-			BIO_printf(out,"  Unknown Public Key:\n");
-		EVP_PKEY_free(pkey);
-	}
-	chal = spki->spkac->challenge;
-	if(chal->length)
-		BIO_printf(out, "  Challenge String: %s\n", chal->data);
-	i=OBJ_obj2nid(spki->sig_algor->algorithm);
-	BIO_printf(out,"  Signature Algorithm: %s",
-				(i == NID_undef)?"UNKNOWN":OBJ_nid2ln(i));
-
-	n=spki->signature->length;
-	s=(char *)spki->signature->data;
-	for (i=0; i<n; i++)
-		{
-		if ((i%18) == 0) BIO_write(out,"\n      ",7);
-		BIO_printf(out,"%02x%s",(unsigned char)s[i],
-						((i+1) == n)?"":":");
-		}
-	BIO_write(out,"\n",1);
-	return 1;
-}
diff --git a/crypto/openssl/crypto/asn1/t_x509.c b/crypto/openssl/crypto/asn1/t_x509.c
deleted file mode 100644
index fe2ea4046d2b..000000000000
--- a/crypto/openssl/crypto/asn1/t_x509.c
+++ /dev/null
@@ -1,505 +0,0 @@
-/* crypto/asn1/t_x509.c */
-/* Copyright (C) 1995-1998 Eric Young (eay@cryptsoft.com)
- * All rights reserved.
- *
- * This package is an SSL implementation written
- * by Eric Young (eay@cryptsoft.com).
- * The implementation was written so as to conform with Netscapes SSL.
- * 
- * This library is free for commercial and non-commercial use as long as
- * the following conditions are aheared to.  The following conditions
- * apply to all code found in this distribution, be it the RC4, RSA,
- * lhash, DES, etc., code; not just the SSL code.  The SSL documentation
- * included with this distribution is covered by the same copyright terms
- * except that the holder is Tim Hudson (tjh@cryptsoft.com).
- * 
- * Copyright remains Eric Young's, and as such any Copyright notices in
- * the code are not to be removed.
- * If this package is used in a product, Eric Young should be given attribution
- * as the author of the parts of the library used.
- * This can be in the form of a textual message at program startup or
- * in documentation (online or textual) provided with the package.
- * 
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions
- * are met:
- * 1. Redistributions of source code must retain the copyright
- *    notice, this list of conditions and the following disclaimer.
- * 2. Redistributions in binary form must reproduce the above copyright
- *    notice, this list of conditions and the following disclaimer in the
- *    documentation and/or other materials provided with the distribution.
- * 3. All advertising materials mentioning features or use of this software
- *    must display the following acknowledgement:
- *    "This product includes cryptographic software written by
- *     Eric Young (eay@cryptsoft.com)"
- *    The word 'cryptographic' can be left out if the rouines from the library
- *    being used are not cryptographic related :-).
- * 4. If you include any Windows specific code (or a derivative thereof) from 
- *    the apps directory (application code) you must include an acknowledgement:
- *    "This product includes software written by Tim Hudson (tjh@cryptsoft.com)"
- * 
- * THIS SOFTWARE IS PROVIDED BY ERIC YOUNG ``AS IS'' AND
- * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
- * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
- * ARE DISCLAIMED.  IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE
- * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
- * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
- * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
- * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
- * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
- * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
- * SUCH DAMAGE.
- * 
- * The licence and distribution terms for any publically available version or
- * derivative of this code cannot be changed.  i.e. this code cannot simply be
- * copied and put under another distribution licence
- * [including the GNU Public Licence.]
- */
-
-#include <stdio.h>
-#include "cryptlib.h"
-#include <openssl/buffer.h>
-#include <openssl/bn.h>
-#ifndef OPENSSL_NO_RSA
-#include <openssl/rsa.h>
-#endif
-#ifndef OPENSSL_NO_DSA
-#include <openssl/dsa.h>
-#endif
-#ifndef OPENSSL_NO_EC
-#include <openssl/ec.h>
-#endif
-#include <openssl/objects.h>
-#include <openssl/x509.h>
-#include <openssl/x509v3.h>
-
-#ifndef OPENSSL_NO_FP_API
-int X509_print_fp(FILE *fp, X509 *x)
-	{
-	return X509_print_ex_fp(fp, x, XN_FLAG_COMPAT, X509_FLAG_COMPAT);
-	}
-
-int X509_print_ex_fp(FILE *fp, X509 *x, unsigned long nmflag, unsigned long cflag)
-        {
-        BIO *b;
-        int ret;
-
-        if ((b=BIO_new(BIO_s_file())) == NULL)
-		{
-		X509err(X509_F_X509_PRINT_EX_FP,ERR_R_BUF_LIB);
-                return(0);
-		}
-        BIO_set_fp(b,fp,BIO_NOCLOSE);
-        ret=X509_print_ex(b, x, nmflag, cflag);
-        BIO_free(b);
-        return(ret);
-        }
-#endif
-
-int X509_print(BIO *bp, X509 *x)
-{
-	return X509_print_ex(bp, x, XN_FLAG_COMPAT, X509_FLAG_COMPAT);
-}
-
-int X509_print_ex(BIO *bp, X509 *x, unsigned long nmflags, unsigned long cflag)
-	{
-	long l;
-	int ret=0,i;
-	char *m=NULL,mlch = ' ';
-	int nmindent = 0;
-	X509_CINF *ci;
-	ASN1_INTEGER *bs;
-	EVP_PKEY *pkey=NULL;
-	const char *neg;
-	ASN1_STRING *str=NULL;
-
-	if((nmflags & XN_FLAG_SEP_MASK) == XN_FLAG_SEP_MULTILINE) {
-			mlch = '\n';
-			nmindent = 12;
-	}
-
-	if(nmflags == X509_FLAG_COMPAT)
-		nmindent = 16;
-
-	ci=x->cert_info;
-	if(!(cflag & X509_FLAG_NO_HEADER))
-		{
-		if (BIO_write(bp,"Certificate:\n",13) <= 0) goto err;
-		if (BIO_write(bp,"    Data:\n",10) <= 0) goto err;
-		}
-	if(!(cflag & X509_FLAG_NO_VERSION))
-		{
-		l=X509_get_version(x);
-		if (BIO_printf(bp,"%8sVersion: %lu (0x%lx)\n","",l+1,l) <= 0) goto err;
-		}
-	if(!(cflag & X509_FLAG_NO_SERIAL))
-		{
-
-		if (BIO_write(bp,"        Serial Number:",22) <= 0) goto err;
-
-		bs=X509_get_serialNumber(x);
-		if (bs->length <= 4)
-			{
-			l=ASN1_INTEGER_get(bs);
-			if (l < 0)
-				{
-				l= -l;
-				neg="-";
-				}
-			else
-				neg="";
-			if (BIO_printf(bp," %s%lu (%s0x%lx)\n",neg,l,neg,l) <= 0)
-				goto err;
-			}
-		else
-			{
-			neg=(bs->type == V_ASN1_NEG_INTEGER)?" (Negative)":"";
-			if (BIO_printf(bp,"\n%12s%s","",neg) <= 0) goto err;
-
-			for (i=0; i<bs->length; i++)
-				{
-				if (BIO_printf(bp,"%02x%c",bs->data[i],
-					((i+1 == bs->length)?'\n':':')) <= 0)
-					goto err;
-				}
-			}
-
-		}
-
-	if(!(cflag & X509_FLAG_NO_SIGNAME))
-		{
-		if (BIO_printf(bp,"%8sSignature Algorithm: ","") <= 0) 
-			goto err;
-		if (i2a_ASN1_OBJECT(bp, ci->signature->algorithm) <= 0)
-			goto err;
-		if (BIO_puts(bp, "\n") <= 0)
-			goto err;
-		}
-
-	if(!(cflag & X509_FLAG_NO_ISSUER))
-		{
-		if (BIO_printf(bp,"        Issuer:%c",mlch) <= 0) goto err;
-		if (X509_NAME_print_ex(bp,X509_get_issuer_name(x),nmindent, nmflags) < 0) goto err;
-		if (BIO_write(bp,"\n",1) <= 0) goto err;
-		}
-	if(!(cflag & X509_FLAG_NO_VALIDITY))
-		{
-		if (BIO_write(bp,"        Validity\n",17) <= 0) goto err;
-		if (BIO_write(bp,"            Not Before: ",24) <= 0) goto err;
-		if (!ASN1_TIME_print(bp,X509_get_notBefore(x))) goto err;
-		if (BIO_write(bp,"\n            Not After : ",25) <= 0) goto err;
-		if (!ASN1_TIME_print(bp,X509_get_notAfter(x))) goto err;
-		if (BIO_write(bp,"\n",1) <= 0) goto err;
-		}
-	if(!(cflag & X509_FLAG_NO_SUBJECT))
-		{
-		if (BIO_printf(bp,"        Subject:%c",mlch) <= 0) goto err;
-		if (X509_NAME_print_ex(bp,X509_get_subject_name(x),nmindent, nmflags) < 0) goto err;
-		if (BIO_write(bp,"\n",1) <= 0) goto err;
-		}
-	if(!(cflag & X509_FLAG_NO_PUBKEY))
-		{
-		if (BIO_write(bp,"        Subject Public Key Info:\n",33) <= 0)
-			goto err;
-		if (BIO_printf(bp,"%12sPublic Key Algorithm: ","") <= 0)
-			goto err;
-		if (i2a_ASN1_OBJECT(bp, ci->key->algor->algorithm) <= 0)
-			goto err;
-		if (BIO_puts(bp, "\n") <= 0)
-			goto err;
-
-		pkey=X509_get_pubkey(x);
-		if (pkey == NULL)
-			{
-			BIO_printf(bp,"%12sUnable to load Public Key\n","");
-			ERR_print_errors(bp);
-			}
-		else
-#ifndef OPENSSL_NO_RSA
-		if (pkey->type == EVP_PKEY_RSA)
-			{
-			BIO_printf(bp,"%12sRSA Public Key: (%d bit)\n","",
-			BN_num_bits(pkey->pkey.rsa->n));
-			RSA_print(bp,pkey->pkey.rsa,16);
-			}
-		else
-#endif
-#ifndef OPENSSL_NO_DSA
-		if (pkey->type == EVP_PKEY_DSA)
-			{
-			BIO_printf(bp,"%12sDSA Public Key:\n","");
-			DSA_print(bp,pkey->pkey.dsa,16);
-			}
-		else
-#endif
-#ifndef OPENSSL_NO_EC
-		if (pkey->type == EVP_PKEY_EC)
-			{
-			BIO_printf(bp, "%12sEC Public Key:\n","");
-			EC_KEY_print(bp, pkey->pkey.ec, 16);
-			}
-		else
-#endif
-			BIO_printf(bp,"%12sUnknown Public Key:\n","");
-
-		EVP_PKEY_free(pkey);
-		}
-
-	if (!(cflag & X509_FLAG_NO_EXTENSIONS))
-		X509V3_extensions_print(bp, "X509v3 extensions",
-					ci->extensions, cflag, 8);
-
-	if(!(cflag & X509_FLAG_NO_SIGDUMP))
-		{
-		if(X509_signature_print(bp, x->sig_alg, x->signature) <= 0) goto err;
-		}
-	if(!(cflag & X509_FLAG_NO_AUX))
-		{
-		if (!X509_CERT_AUX_print(bp, x->aux, 0)) goto err;
-		}
-	ret=1;
-err:
-	if (str != NULL) ASN1_STRING_free(str);
-	if (m != NULL) OPENSSL_free(m);
-	return(ret);
-	}
-
-int X509_ocspid_print (BIO *bp, X509 *x)
-	{
-	unsigned char *der=NULL ;
-	unsigned char *dertmp;
-	int derlen;
-	int i;
-	unsigned char SHA1md[SHA_DIGEST_LENGTH];
-
-	/* display the hash of the subject as it would appear
-	   in OCSP requests */
-	if (BIO_printf(bp,"        Subject OCSP hash: ") <= 0)
-		goto err;
-	derlen = i2d_X509_NAME(x->cert_info->subject, NULL);
-	if ((der = dertmp = (unsigned char *)OPENSSL_malloc (derlen)) == NULL)
-		goto err;
-	i2d_X509_NAME(x->cert_info->subject, &dertmp);
-
-	EVP_Digest(der, derlen, SHA1md, NULL, EVP_sha1(), NULL);
-	for (i=0; i < SHA_DIGEST_LENGTH; i++)
-		{
-		if (BIO_printf(bp,"%02X",SHA1md[i]) <= 0) goto err;
-		}
-	OPENSSL_free (der);
-	der=NULL;
-
-	/* display the hash of the public key as it would appear
-	   in OCSP requests */
-	if (BIO_printf(bp,"\n        Public key OCSP hash: ") <= 0)
-		goto err;
-
-	EVP_Digest(x->cert_info->key->public_key->data,
-		x->cert_info->key->public_key->length, SHA1md, NULL, EVP_sha1(), NULL);
-	for (i=0; i < SHA_DIGEST_LENGTH; i++)
-		{
-		if (BIO_printf(bp,"%02X",SHA1md[i]) <= 0)
-			goto err;
-		}
-	BIO_printf(bp,"\n");
-
-	return (1);
-err:
-	if (der != NULL) OPENSSL_free(der);
-	return(0);
-	}
-
-int X509_signature_print(BIO *bp, X509_ALGOR *sigalg, ASN1_STRING *sig)
-{
-	unsigned char *s;
-	int i, n;
-	if (BIO_puts(bp,"    Signature Algorithm: ") <= 0) return 0;
-	if (i2a_ASN1_OBJECT(bp, sigalg->algorithm) <= 0) return 0;
-
-	n=sig->length;
-	s=sig->data;
-	for (i=0; i<n; i++)
-		{
-		if ((i%18) == 0)
-			if (BIO_write(bp,"\n        ",9) <= 0) return 0;
-			if (BIO_printf(bp,"%02x%s",s[i],
-				((i+1) == n)?"":":") <= 0) return 0;
-		}
-	if (BIO_write(bp,"\n",1) != 1) return 0;
-	return 1;
-}
-
-int ASN1_STRING_print(BIO *bp, ASN1_STRING *v)
-	{
-	int i,n;
-	char buf[80],*p;;
-
-	if (v == NULL) return(0);
-	n=0;
-	p=(char *)v->data;
-	for (i=0; i<v->length; i++)
-		{
-		if ((p[i] > '~') || ((p[i] < ' ') &&
-			(p[i] != '\n') && (p[i] != '\r')))
-			buf[n]='.';
-		else
-			buf[n]=p[i];
-		n++;
-		if (n >= 80)
-			{
-			if (BIO_write(bp,buf,n) <= 0)
-				return(0);
-			n=0;
-			}
-		}
-	if (n > 0)
-		if (BIO_write(bp,buf,n) <= 0)
-			return(0);
-	return(1);
-	}
-
-int ASN1_TIME_print(BIO *bp, ASN1_TIME *tm)
-{
-	if(tm->type == V_ASN1_UTCTIME) return ASN1_UTCTIME_print(bp, tm);
-	if(tm->type == V_ASN1_GENERALIZEDTIME)
-				return ASN1_GENERALIZEDTIME_print(bp, tm);
-	BIO_write(bp,"Bad time value",14);
-	return(0);
-}
-
-static const char *mon[12]=
-    {
-    "Jan","Feb","Mar","Apr","May","Jun",
-    "Jul","Aug","Sep","Oct","Nov","Dec"
-    };
-
-int ASN1_GENERALIZEDTIME_print(BIO *bp, ASN1_GENERALIZEDTIME *tm)
-	{
-	char *v;
-	int gmt=0;
-	int i;
-	int y=0,M=0,d=0,h=0,m=0,s=0;
-
-	i=tm->length;
-	v=(char *)tm->data;
-
-	if (i < 12) goto err;
-	if (v[i-1] == 'Z') gmt=1;
-	for (i=0; i<12; i++)
-		if ((v[i] > '9') || (v[i] < '0')) goto err;
-	y= (v[0]-'0')*1000+(v[1]-'0')*100 + (v[2]-'0')*10+(v[3]-'0');
-	M= (v[4]-'0')*10+(v[5]-'0');
-	if ((M > 12) || (M < 1)) goto err;
-	d= (v[6]-'0')*10+(v[7]-'0');
-	h= (v[8]-'0')*10+(v[9]-'0');
-	m=  (v[10]-'0')*10+(v[11]-'0');
-	if (	(v[12] >= '0') && (v[12] <= '9') &&
-		(v[13] >= '0') && (v[13] <= '9'))
-		s=  (v[12]-'0')*10+(v[13]-'0');
-
-	if (BIO_printf(bp,"%s %2d %02d:%02d:%02d %d%s",
-		mon[M-1],d,h,m,s,y,(gmt)?" GMT":"") <= 0)
-		return(0);
-	else
-		return(1);
-err:
-	BIO_write(bp,"Bad time value",14);
-	return(0);
-	}
-
-int ASN1_UTCTIME_print(BIO *bp, ASN1_UTCTIME *tm)
-	{
-	char *v;
-	int gmt=0;
-	int i;
-	int y=0,M=0,d=0,h=0,m=0,s=0;
-
-	i=tm->length;
-	v=(char *)tm->data;
-
-	if (i < 10) goto err;
-	if (v[i-1] == 'Z') gmt=1;
-	for (i=0; i<10; i++)
-		if ((v[i] > '9') || (v[i] < '0')) goto err;
-	y= (v[0]-'0')*10+(v[1]-'0');
-	if (y < 50) y+=100;
-	M= (v[2]-'0')*10+(v[3]-'0');
-	if ((M > 12) || (M < 1)) goto err;
-	d= (v[4]-'0')*10+(v[5]-'0');
-	h= (v[6]-'0')*10+(v[7]-'0');
-	m=  (v[8]-'0')*10+(v[9]-'0');
-	if (	(v[10] >= '0') && (v[10] <= '9') &&
-		(v[11] >= '0') && (v[11] <= '9'))
-		s=  (v[10]-'0')*10+(v[11]-'0');
-
-	if (BIO_printf(bp,"%s %2d %02d:%02d:%02d %d%s",
-		mon[M-1],d,h,m,s,y+1900,(gmt)?" GMT":"") <= 0)
-		return(0);
-	else
-		return(1);
-err:
-	BIO_write(bp,"Bad time value",14);
-	return(0);
-	}
-
-int X509_NAME_print(BIO *bp, X509_NAME *name, int obase)
-	{
-	char *s,*c,*b;
-	int ret=0,l,i;
-
-	l=80-2-obase;
-
-	b=s=X509_NAME_oneline(name,NULL,0);
-	if (!*s)
-		{
-		OPENSSL_free(b);
-		return 1;
-		}
-	s++; /* skip the first slash */
-
-	c=s;
-	for (;;)
-		{
-#ifndef CHARSET_EBCDIC
-		if (	((*s == '/') &&
-				((s[1] >= 'A') && (s[1] <= 'Z') && (
-					(s[2] == '=') ||
-					((s[2] >= 'A') && (s[2] <= 'Z') &&
-					(s[3] == '='))
-				 ))) ||
-			(*s == '\0'))
-#else
-		if (	((*s == '/') &&
-				(isupper(s[1]) && (
-					(s[2] == '=') ||
-					(isupper(s[2]) &&
-					(s[3] == '='))
-				 ))) ||
-			(*s == '\0'))
-#endif
-			{
-			i=s-c;
-			if (BIO_write(bp,c,i) != i) goto err;
-			c+=i;
-			c++;
-			if (*s != '\0')
-				{
-				if (BIO_write(bp,", ",2) != 2) goto err;
-				}
-			l--;
-			}
-		if (*s == '\0') break;
-		s++;
-		l--;
-		}
-	
-	ret=1;
-	if (0)
-		{
-err:
-		X509err(X509_F_X509_NAME_PRINT,ERR_R_BUF_LIB);
-		}
-	OPENSSL_free(b);
-	return(ret);
-	}
-
diff --git a/crypto/openssl/crypto/asn1/t_x509a.c b/crypto/openssl/crypto/asn1/t_x509a.c
deleted file mode 100644
index ffbbfb51f43e..000000000000
--- a/crypto/openssl/crypto/asn1/t_x509a.c
+++ /dev/null
@@ -1,110 +0,0 @@
-/* t_x509a.c */
-/* Written by Dr Stephen N Henson (shenson@bigfoot.com) for the OpenSSL
- * project 1999.
- */
-/* ====================================================================
- * Copyright (c) 1999 The OpenSSL Project.  All rights reserved.
- *
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions
- * are met:
- *
- * 1. Redistributions of source code must retain the above copyright
- *    notice, this list of conditions and the following disclaimer. 
- *
- * 2. Redistributions in binary form must reproduce the above copyright
- *    notice, this list of conditions and the following disclaimer in
- *    the documentation and/or other materials provided with the
- *    distribution.
- *
- * 3. All advertising materials mentioning features or use of this
- *    software must display the following acknowledgment:
- *    "This product includes software developed by the OpenSSL Project
- *    for use in the OpenSSL Toolkit. (http://www.OpenSSL.org/)"
- *
- * 4. The names "OpenSSL Toolkit" and "OpenSSL Project" must not be used to
- *    endorse or promote products derived from this software without
- *    prior written permission. For written permission, please contact
- *    licensing@OpenSSL.org.
- *
- * 5. Products derived from this software may not be called "OpenSSL"
- *    nor may "OpenSSL" appear in their names without prior written
- *    permission of the OpenSSL Project.
- *
- * 6. Redistributions of any form whatsoever must retain the following
- *    acknowledgment:
- *    "This product includes software developed by the OpenSSL Project
- *    for use in the OpenSSL Toolkit (http://www.OpenSSL.org/)"
- *
- * THIS SOFTWARE IS PROVIDED BY THE OpenSSL PROJECT ``AS IS'' AND ANY
- * EXPRESSED OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
- * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR
- * PURPOSE ARE DISCLAIMED.  IN NO EVENT SHALL THE OpenSSL PROJECT OR
- * ITS CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
- * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
- * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
- * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
- * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
- * STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
- * ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED
- * OF THE POSSIBILITY OF SUCH DAMAGE.
- * ====================================================================
- *
- * This product includes cryptographic software written by Eric Young
- * (eay@cryptsoft.com).  This product includes software written by Tim
- * Hudson (tjh@cryptsoft.com).
- *
- */
-
-#include <stdio.h>
-#include "cryptlib.h"
-#include <openssl/evp.h>
-#include <openssl/asn1.h>
-#include <openssl/x509.h>
-
-/* X509_CERT_AUX and string set routines
- */
-
-int X509_CERT_AUX_print(BIO *out, X509_CERT_AUX *aux, int indent)
-{
-	char oidstr[80], first;
-	int i;
-	if(!aux) return 1;
-	if(aux->trust) {
-		first = 1;
-		BIO_printf(out, "%*sTrusted Uses:\n%*s",
-						indent, "", indent + 2, "");
-		for(i = 0; i < sk_ASN1_OBJECT_num(aux->trust); i++) {
-			if(!first) BIO_puts(out, ", ");
-			else first = 0;
-			OBJ_obj2txt(oidstr, sizeof oidstr,
-				sk_ASN1_OBJECT_value(aux->trust, i), 0);
-			BIO_puts(out, oidstr);
-		}
-		BIO_puts(out, "\n");
-	} else BIO_printf(out, "%*sNo Trusted Uses.\n", indent, "");
-	if(aux->reject) {
-		first = 1;
-		BIO_printf(out, "%*sRejected Uses:\n%*s",
-						indent, "", indent + 2, "");
-		for(i = 0; i < sk_ASN1_OBJECT_num(aux->reject); i++) {
-			if(!first) BIO_puts(out, ", ");
-			else first = 0;
-			OBJ_obj2txt(oidstr, sizeof oidstr,
-				sk_ASN1_OBJECT_value(aux->reject, i), 0);
-			BIO_puts(out, oidstr);
-		}
-		BIO_puts(out, "\n");
-	} else BIO_printf(out, "%*sNo Rejected Uses.\n", indent, "");
-	if(aux->alias) BIO_printf(out, "%*sAlias: %s\n", indent, "",
-							aux->alias->data);
-	if(aux->keyid) {
-		BIO_printf(out, "%*sKey Id: ", indent, "");
-		for(i = 0; i < aux->keyid->length; i++) 
-			BIO_printf(out, "%s%02X", 
-				i ? ":" : "",
-				aux->keyid->data[i]);
-		BIO_write(out,"\n",1);
-	}
-	return 1;
-}
diff --git a/crypto/openssl/crypto/asn1/tasn_dec.c b/crypto/openssl/crypto/asn1/tasn_dec.c
deleted file mode 100644
index 66d229b08b39..000000000000
--- a/crypto/openssl/crypto/asn1/tasn_dec.c
+++ /dev/null
@@ -1,1322 +0,0 @@
-/* tasn_dec.c */
-/* Written by Dr Stephen N Henson (shenson@bigfoot.com) for the OpenSSL
- * project 2000.
- */
-/* ====================================================================
- * Copyright (c) 2000-2005 The OpenSSL Project.  All rights reserved.
- *
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions
- * are met:
- *
- * 1. Redistributions of source code must retain the above copyright
- *    notice, this list of conditions and the following disclaimer. 
- *
- * 2. Redistributions in binary form must reproduce the above copyright
- *    notice, this list of conditions and the following disclaimer in
- *    the documentation and/or other materials provided with the
- *    distribution.
- *
- * 3. All advertising materials mentioning features or use of this
- *    software must display the following acknowledgment:
- *    "This product includes software developed by the OpenSSL Project
- *    for use in the OpenSSL Toolkit. (http://www.OpenSSL.org/)"
- *
- * 4. The names "OpenSSL Toolkit" and "OpenSSL Project" must not be used to
- *    endorse or promote products derived from this software without
- *    prior written permission. For written permission, please contact
- *    licensing@OpenSSL.org.
- *
- * 5. Products derived from this software may not be called "OpenSSL"
- *    nor may "OpenSSL" appear in their names without prior written
- *    permission of the OpenSSL Project.
- *
- * 6. Redistributions of any form whatsoever must retain the following
- *    acknowledgment:
- *    "This product includes software developed by the OpenSSL Project
- *    for use in the OpenSSL Toolkit (http://www.OpenSSL.org/)"
- *
- * THIS SOFTWARE IS PROVIDED BY THE OpenSSL PROJECT ``AS IS'' AND ANY
- * EXPRESSED OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
- * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR
- * PURPOSE ARE DISCLAIMED.  IN NO EVENT SHALL THE OpenSSL PROJECT OR
- * ITS CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
- * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
- * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
- * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
- * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
- * STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
- * ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED
- * OF THE POSSIBILITY OF SUCH DAMAGE.
- * ====================================================================
- *
- * This product includes cryptographic software written by Eric Young
- * (eay@cryptsoft.com).  This product includes software written by Tim
- * Hudson (tjh@cryptsoft.com).
- *
- */
-
-
-#include <stddef.h>
-#include <string.h>
-#include <openssl/asn1.h>
-#include <openssl/asn1t.h>
-#include <openssl/objects.h>
-#include <openssl/buffer.h>
-#include <openssl/err.h>
-
-static int asn1_check_eoc(const unsigned char **in, long len);
-static int asn1_find_end(const unsigned char **in, long len, char inf);
-
-static int asn1_collect(BUF_MEM *buf, const unsigned char **in, long len,
-				char inf, int tag, int aclass);
-
-static int collect_data(BUF_MEM *buf, const unsigned char **p, long plen);
-
-static int asn1_check_tlen(long *olen, int *otag, unsigned char *oclass,
-				char *inf, char *cst,
-				const unsigned char **in, long len,
-				int exptag, int expclass, char opt,
-				ASN1_TLC *ctx);
-
-static int asn1_template_ex_d2i(ASN1_VALUE **pval,
-				const unsigned char **in, long len,
-				const ASN1_TEMPLATE *tt, char opt,
-				ASN1_TLC *ctx);
-static int asn1_template_noexp_d2i(ASN1_VALUE **val,
-				const unsigned char **in, long len,
-				const ASN1_TEMPLATE *tt, char opt,
-				ASN1_TLC *ctx);
-static int asn1_d2i_ex_primitive(ASN1_VALUE **pval,
-				const unsigned char **in, long len,
-				const ASN1_ITEM *it,
-				int tag, int aclass, char opt, ASN1_TLC *ctx);
-
-/* Table to convert tags to bit values, used for MSTRING type */
-static const unsigned long tag2bit[32] = {
-0,	0,	0,	B_ASN1_BIT_STRING,	/* tags  0 -  3 */
-B_ASN1_OCTET_STRING,	0,	0,		B_ASN1_UNKNOWN,/* tags  4- 7 */
-B_ASN1_UNKNOWN,	B_ASN1_UNKNOWN,	B_ASN1_UNKNOWN,	B_ASN1_UNKNOWN,/* tags  8-11 */
-B_ASN1_UTF8STRING,B_ASN1_UNKNOWN,B_ASN1_UNKNOWN,B_ASN1_UNKNOWN,/* tags 12-15 */
-B_ASN1_SEQUENCE,0,B_ASN1_NUMERICSTRING,B_ASN1_PRINTABLESTRING, /* tags 16-19 */
-B_ASN1_T61STRING,B_ASN1_VIDEOTEXSTRING,B_ASN1_IA5STRING,       /* tags 20-22 */
-B_ASN1_UTCTIME, B_ASN1_GENERALIZEDTIME,			       /* tags 23-24 */	
-B_ASN1_GRAPHICSTRING,B_ASN1_ISO64STRING,B_ASN1_GENERALSTRING,  /* tags 25-27 */
-B_ASN1_UNIVERSALSTRING,B_ASN1_UNKNOWN,B_ASN1_BMPSTRING,B_ASN1_UNKNOWN, /* tags 28-31 */
-	};
-
-unsigned long ASN1_tag2bit(int tag)
-	{
-	if ((tag < 0) || (tag > 30)) return 0;
-	return tag2bit[tag];
-	}
-
-/* Macro to initialize and invalidate the cache */
-
-#define asn1_tlc_clear(c)	if (c) (c)->valid = 0
-
-/* Decode an ASN1 item, this currently behaves just 
- * like a standard 'd2i' function. 'in' points to 
- * a buffer to read the data from, in future we will
- * have more advanced versions that can input data
- * a piece at a time and this will simply be a special
- * case.
- */
-
-ASN1_VALUE *ASN1_item_d2i(ASN1_VALUE **pval,
-		const unsigned char **in, long len, const ASN1_ITEM *it)
-	{
-	ASN1_TLC c;
-	ASN1_VALUE *ptmpval = NULL;
-	if (!pval)
-		pval = &ptmpval;
-	asn1_tlc_clear(&c);
-	if (ASN1_item_ex_d2i(pval, in, len, it, -1, 0, 0, &c) > 0) 
-		return *pval;
-	return NULL;
-	}
-
-int ASN1_template_d2i(ASN1_VALUE **pval,
-		const unsigned char **in, long len, const ASN1_TEMPLATE *tt)
-	{
-	ASN1_TLC c;
-	asn1_tlc_clear(&c);
-	return asn1_template_ex_d2i(pval, in, len, tt, 0, &c);
-	}
-
-
-/* Decode an item, taking care of IMPLICIT tagging, if any.
- * If 'opt' set and tag mismatch return -1 to handle OPTIONAL
- */
-
-int ASN1_item_ex_d2i(ASN1_VALUE **pval, const unsigned char **in, long len,
-			const ASN1_ITEM *it,
-			int tag, int aclass, char opt, ASN1_TLC *ctx)
-	{
-	const ASN1_TEMPLATE *tt, *errtt = NULL;
-	const ASN1_COMPAT_FUNCS *cf;
-	const ASN1_EXTERN_FUNCS *ef;
-	const ASN1_AUX *aux = it->funcs;
-	ASN1_aux_cb *asn1_cb;
-	const unsigned char *p = NULL, *q;
-	unsigned char *wp=NULL;	/* BIG FAT WARNING!  BREAKS CONST WHERE USED */
-	unsigned char imphack = 0, oclass;
-	char seq_eoc, seq_nolen, cst, isopt;
-	long tmplen;
-	int i;
-	int otag;
-	int ret = 0;
-	ASN1_VALUE *pchval, **pchptr, *ptmpval;
-	if (!pval)
-		return 0;
-	if (aux && aux->asn1_cb)
-		asn1_cb = aux->asn1_cb;
-	else asn1_cb = 0;
-
-	switch(it->itype)
-		{
-		case ASN1_ITYPE_PRIMITIVE:
-		if (it->templates)
-			{
-			/* tagging or OPTIONAL is currently illegal on an item
-			 * template because the flags can't get passed down.
-			 * In practice this isn't a problem: we include the
-			 * relevant flags from the item template in the
-			 * template itself.
-			 */
-			if ((tag != -1) || opt)
-				{
-				ASN1err(ASN1_F_ASN1_ITEM_EX_D2I,
-				ASN1_R_ILLEGAL_OPTIONS_ON_ITEM_TEMPLATE);
-				goto err;
-				}
-			return asn1_template_ex_d2i(pval, in, len,
-					it->templates, opt, ctx);
-		}
-		return asn1_d2i_ex_primitive(pval, in, len, it,
-						tag, aclass, opt, ctx);
-		break;
-
-		case ASN1_ITYPE_MSTRING:
-		p = *in;
-		/* Just read in tag and class */
-		ret = asn1_check_tlen(NULL, &otag, &oclass, NULL, NULL,
-						&p, len, -1, 0, 1, ctx);
-		if (!ret)
-			{
-			ASN1err(ASN1_F_ASN1_ITEM_EX_D2I,
-					ERR_R_NESTED_ASN1_ERROR);
-			goto err;
-			}
-
-		/* Must be UNIVERSAL class */
-		if (oclass != V_ASN1_UNIVERSAL)
-			{
-			/* If OPTIONAL, assume this is OK */
-			if (opt) return -1;
-			ASN1err(ASN1_F_ASN1_ITEM_EX_D2I,
-					ASN1_R_MSTRING_NOT_UNIVERSAL);
-			goto err;
-			}
-		/* Check tag matches bit map */
-		if (!(ASN1_tag2bit(otag) & it->utype))
-			{
-			/* If OPTIONAL, assume this is OK */
-			if (opt)
-				return -1;
-			ASN1err(ASN1_F_ASN1_ITEM_EX_D2I,
-					ASN1_R_MSTRING_WRONG_TAG);
-			goto err;
-			}
-		return asn1_d2i_ex_primitive(pval, in, len,
-						it, otag, 0, 0, ctx);
-
-		case ASN1_ITYPE_EXTERN:
-		/* Use new style d2i */
-		ef = it->funcs;
-		return ef->asn1_ex_d2i(pval, in, len,
-						it, tag, aclass, opt, ctx);
-
-		case ASN1_ITYPE_COMPAT:
-		/* we must resort to old style evil hackery */
-		cf = it->funcs;
-
-		/* If OPTIONAL see if it is there */
-		if (opt)
-			{
-			int exptag;
-			p = *in;
-			if (tag == -1)
-				exptag = it->utype;
-			else exptag = tag;
-			/* Don't care about anything other than presence
-			 * of expected tag */
-
-			ret = asn1_check_tlen(NULL, NULL, NULL, NULL, NULL,
-					&p, len, exptag, aclass, 1, ctx);
-			if (!ret)
-				{
-				ASN1err(ASN1_F_ASN1_ITEM_EX_D2I,
-					ERR_R_NESTED_ASN1_ERROR);
-				goto err;
-				}
-			if (ret == -1)
-				return -1;
-			}
-
-		/* This is the old style evil hack IMPLICIT handling:
-		 * since the underlying code is expecting a tag and
-		 * class other than the one present we change the
-		 * buffer temporarily then change it back afterwards.
-		 * This doesn't and never did work for tags > 30.
-		 *
-		 * Yes this is *horrible* but it is only needed for
-		 * old style d2i which will hopefully not be around
-		 * for much longer.
-		 * FIXME: should copy the buffer then modify it so
-		 * the input buffer can be const: we should *always*
-		 * copy because the old style d2i might modify the
-		 * buffer.
-		 */
-
-		if (tag != -1)
-			{
-			wp = *(unsigned char **)in;
-			imphack = *wp;
-			if (p == NULL)
-				{
-				ASN1err(ASN1_F_ASN1_ITEM_EX_D2I,
-					ERR_R_NESTED_ASN1_ERROR);
-				goto err;
-				}
-			*wp = (unsigned char)((*p & V_ASN1_CONSTRUCTED)
-								| it->utype);
-			}
-
-		ptmpval = cf->asn1_d2i(pval, in, len);
-
-		if (tag != -1)
-			*wp = imphack;
-
-		if (ptmpval)
-			return 1;
-
-		ASN1err(ASN1_F_ASN1_ITEM_EX_D2I, ERR_R_NESTED_ASN1_ERROR);
-		goto err;
-
-
-		case ASN1_ITYPE_CHOICE:
-		if (asn1_cb && !asn1_cb(ASN1_OP_D2I_PRE, pval, it))
-				goto auxerr;
-
-		/* Allocate structure */
-		if (!*pval && !ASN1_item_ex_new(pval, it))
-			{
-			ASN1err(ASN1_F_ASN1_ITEM_EX_D2I,
-						ERR_R_NESTED_ASN1_ERROR);
-			goto err;
-			}
-		/* CHOICE type, try each possibility in turn */
-		pchval = NULL;
-		p = *in;
-		for (i = 0, tt=it->templates; i < it->tcount; i++, tt++)
-			{
-			pchptr = asn1_get_field_ptr(pval, tt);
-			/* We mark field as OPTIONAL so its absence
-			 * can be recognised.
-			 */
-			ret = asn1_template_ex_d2i(pchptr, &p, len, tt, 1, ctx);
-			/* If field not present, try the next one */
-			if (ret == -1)
-				continue;
-			/* If positive return, read OK, break loop */
-			if (ret > 0)
-				break;
-			/* Otherwise must be an ASN1 parsing error */
-			errtt = tt;
-			ASN1err(ASN1_F_ASN1_ITEM_EX_D2I,
-						ERR_R_NESTED_ASN1_ERROR);
-			goto err;
-			}
-
-		/* Did we fall off the end without reading anything? */
-		if (i == it->tcount)
-			{
-			/* If OPTIONAL, this is OK */
-			if (opt)
-				{
-				/* Free and zero it */
-				ASN1_item_ex_free(pval, it);
-				return -1;
-				}
-			ASN1err(ASN1_F_ASN1_ITEM_EX_D2I,
-					ASN1_R_NO_MATCHING_CHOICE_TYPE);
-			goto err;
-			}
-
-		asn1_set_choice_selector(pval, i, it);
-		*in = p;
-		if (asn1_cb && !asn1_cb(ASN1_OP_D2I_POST, pval, it))
-				goto auxerr;
-		return 1;
-
-		case ASN1_ITYPE_NDEF_SEQUENCE:
-		case ASN1_ITYPE_SEQUENCE:
-		p = *in;
-		tmplen = len;
-
-		/* If no IMPLICIT tagging set to SEQUENCE, UNIVERSAL */
-		if (tag == -1)
-			{
-			tag = V_ASN1_SEQUENCE;
-			aclass = V_ASN1_UNIVERSAL;
-			}
-		/* Get SEQUENCE length and update len, p */
-		ret = asn1_check_tlen(&len, NULL, NULL, &seq_eoc, &cst,
-					&p, len, tag, aclass, opt, ctx);
-		if (!ret)
-			{
-			ASN1err(ASN1_F_ASN1_ITEM_EX_D2I,
-					ERR_R_NESTED_ASN1_ERROR);
-			goto err;
-			}
-		else if (ret == -1)
-			return -1;
-		if (aux && (aux->flags & ASN1_AFLG_BROKEN))
-			{
-			len = tmplen - (p - *in);
-			seq_nolen = 1;
-			}
-		/* If indefinite we don't do a length check */
-		else seq_nolen = seq_eoc;
-		if (!cst)
-			{
-			ASN1err(ASN1_F_ASN1_ITEM_EX_D2I,
-				ASN1_R_SEQUENCE_NOT_CONSTRUCTED);
-			goto err;
-			}
-
-		if (!*pval && !ASN1_item_ex_new(pval, it))
-			{
-			ASN1err(ASN1_F_ASN1_ITEM_EX_D2I,
-				ERR_R_NESTED_ASN1_ERROR);
-			goto err;
-			}
-
-		if (asn1_cb && !asn1_cb(ASN1_OP_D2I_PRE, pval, it))
-				goto auxerr;
-
-		/* Get each field entry */
-		for (i = 0, tt = it->templates; i < it->tcount; i++, tt++)
-			{
-			const ASN1_TEMPLATE *seqtt;
-			ASN1_VALUE **pseqval;
-			seqtt = asn1_do_adb(pval, tt, 1);
-			if (!seqtt)
-				goto err;
-			pseqval = asn1_get_field_ptr(pval, seqtt);
-			/* Have we ran out of data? */
-			if (!len)
-				break;
-			q = p;
-			if (asn1_check_eoc(&p, len))
-				{
-				if (!seq_eoc)
-					{
-					ASN1err(ASN1_F_ASN1_ITEM_EX_D2I,
-							ASN1_R_UNEXPECTED_EOC);
-					goto err;
-					}
-				len -= p - q;
-				seq_eoc = 0;
-				q = p;
-				break;
-				}
-			/* This determines the OPTIONAL flag value. The field
-			 * cannot be omitted if it is the last of a SEQUENCE
-			 * and there is still data to be read. This isn't
-			 * strictly necessary but it increases efficiency in
-			 * some cases.
-			 */
-			if (i == (it->tcount - 1))
-				isopt = 0;
-			else isopt = (char)(seqtt->flags & ASN1_TFLG_OPTIONAL);
-			/* attempt to read in field, allowing each to be
-			 * OPTIONAL */
-
-			ret = asn1_template_ex_d2i(pseqval, &p, len,
-							seqtt, isopt, ctx);
-			if (!ret)
-				{
-				errtt = seqtt;
-				goto err;
-				}
-			else if (ret == -1)
-				{
-				/* OPTIONAL component absent.
-				 * Free and zero the field.
-				 */
-				ASN1_template_free(pseqval, seqtt);
-				continue;
-				}
-			/* Update length */
-			len -= p - q;
-			}
-
-		/* Check for EOC if expecting one */
-		if (seq_eoc && !asn1_check_eoc(&p, len))
-			{
-			ASN1err(ASN1_F_ASN1_ITEM_EX_D2I, ASN1_R_MISSING_EOC);
-			goto err;
-			}
-		/* Check all data read */
-		if (!seq_nolen && len)
-			{
-			ASN1err(ASN1_F_ASN1_ITEM_EX_D2I,
-					ASN1_R_SEQUENCE_LENGTH_MISMATCH);
-			goto err;
-			}
-
-		/* If we get here we've got no more data in the SEQUENCE,
-		 * however we may not have read all fields so check all
-		 * remaining are OPTIONAL and clear any that are.
-		 */
-		for (; i < it->tcount; tt++, i++)
-			{
-			const ASN1_TEMPLATE *seqtt;
-			seqtt = asn1_do_adb(pval, tt, 1);
-			if (!seqtt)
-				goto err;
-			if (seqtt->flags & ASN1_TFLG_OPTIONAL)
-				{
-				ASN1_VALUE **pseqval;
-				pseqval = asn1_get_field_ptr(pval, seqtt);
-				ASN1_template_free(pseqval, seqtt);
-				}
-			else
-				{
-				errtt = seqtt;
-				ASN1err(ASN1_F_ASN1_ITEM_EX_D2I,
-							ASN1_R_FIELD_MISSING);
-				goto err;
-				}
-			}
-		/* Save encoding */
-		if (!asn1_enc_save(pval, *in, p - *in, it))
-			goto auxerr;
-		*in = p;
-		if (asn1_cb && !asn1_cb(ASN1_OP_D2I_POST, pval, it))
-				goto auxerr;
-		return 1;
-
-		default:
-		return 0;
-		}
-	auxerr:
-	ASN1err(ASN1_F_ASN1_ITEM_EX_D2I, ASN1_R_AUX_ERROR);
-	err:
-	ASN1_item_ex_free(pval, it);
-	if (errtt)
-		ERR_add_error_data(4, "Field=", errtt->field_name,
-					", Type=", it->sname);
-	else
-		ERR_add_error_data(2, "Type=", it->sname);
-	return 0;
-	}
-
-/* Templates are handled with two separate functions.
- * One handles any EXPLICIT tag and the other handles the rest.
- */
-
-static int asn1_template_ex_d2i(ASN1_VALUE **val,
-				const unsigned char **in, long inlen,
-				const ASN1_TEMPLATE *tt, char opt,
-							ASN1_TLC *ctx)
-	{
-	int flags, aclass;
-	int ret;
-	long len;
-	const unsigned char *p, *q;
-	char exp_eoc;
-	if (!val)
-		return 0;
-	flags = tt->flags;
-	aclass = flags & ASN1_TFLG_TAG_CLASS;
-
-	p = *in;
-
-	/* Check if EXPLICIT tag expected */
-	if (flags & ASN1_TFLG_EXPTAG)
-		{
-		char cst;
-		/* Need to work out amount of data available to the inner
-		 * content and where it starts: so read in EXPLICIT header to
-		 * get the info.
-		 */
-		ret = asn1_check_tlen(&len, NULL, NULL, &exp_eoc, &cst,
-					&p, inlen, tt->tag, aclass, opt, ctx);
-		q = p;
-		if (!ret)
-			{
-			ASN1err(ASN1_F_ASN1_TEMPLATE_EX_D2I,
-					ERR_R_NESTED_ASN1_ERROR);
-			return 0;
-			}
-		else if (ret == -1)
-			return -1;
-		if (!cst)
-			{
-			ASN1err(ASN1_F_ASN1_TEMPLATE_EX_D2I,
-					ASN1_R_EXPLICIT_TAG_NOT_CONSTRUCTED);
-			return 0;
-			}
-		/* We've found the field so it can't be OPTIONAL now */
-		ret = asn1_template_noexp_d2i(val, &p, len, tt, 0, ctx);
-		if (!ret)
-			{
-			ASN1err(ASN1_F_ASN1_TEMPLATE_EX_D2I,
-					ERR_R_NESTED_ASN1_ERROR);
-			return 0;
-			}
-		/* We read the field in OK so update length */
-		len -= p - q;
-		if (exp_eoc)
-			{
-			/* If NDEF we must have an EOC here */
-			if (!asn1_check_eoc(&p, len))
-				{
-				ASN1err(ASN1_F_ASN1_TEMPLATE_EX_D2I,
-						ASN1_R_MISSING_EOC);
-				goto err;
-				}
-			}
-		else
-			{
-			/* Otherwise we must hit the EXPLICIT tag end or its
-			 * an error */
-			if (len)
-				{
-				ASN1err(ASN1_F_ASN1_TEMPLATE_EX_D2I,
-					ASN1_R_EXPLICIT_LENGTH_MISMATCH);
-				goto err;
-				}
-			}
-		}
-		else 
-			return asn1_template_noexp_d2i(val, in, inlen,
-								tt, opt, ctx);
-
-	*in = p;
-	return 1;
-
-	err:
-	ASN1_template_free(val, tt);
-	*val = NULL;
-	return 0;
-	}
-
-static int asn1_template_noexp_d2i(ASN1_VALUE **val,
-				const unsigned char **in, long len,
-				const ASN1_TEMPLATE *tt, char opt,
-				ASN1_TLC *ctx)
-	{
-	int flags, aclass;
-	int ret;
-	const unsigned char *p, *q;
-	if (!val)
-		return 0;
-	flags = tt->flags;
-	aclass = flags & ASN1_TFLG_TAG_CLASS;
-
-	p = *in;
-	q = p;
-
-	if (flags & ASN1_TFLG_SK_MASK)
-		{
-		/* SET OF, SEQUENCE OF */
-		int sktag, skaclass;
-		char sk_eoc;
-		/* First work out expected inner tag value */
-		if (flags & ASN1_TFLG_IMPTAG)
-			{
-			sktag = tt->tag;
-			skaclass = aclass;
-			}
-		else
-			{
-			skaclass = V_ASN1_UNIVERSAL;
-			if (flags & ASN1_TFLG_SET_OF)
-				sktag = V_ASN1_SET;
-			else
-				sktag = V_ASN1_SEQUENCE;
-			}
-		/* Get the tag */
-		ret = asn1_check_tlen(&len, NULL, NULL, &sk_eoc, NULL,
-					&p, len, sktag, skaclass, opt, ctx);
-		if (!ret)
-			{
-			ASN1err(ASN1_F_ASN1_TEMPLATE_NOEXP_D2I,
-						ERR_R_NESTED_ASN1_ERROR);
-			return 0;
-			}
-		else if (ret == -1)
-			return -1;
-		if (!*val)
-			*val = (ASN1_VALUE *)sk_new_null();
-		else
-			{
-			/* We've got a valid STACK: free up any items present */
-			STACK *sktmp = (STACK *)*val;
-			ASN1_VALUE *vtmp;
-			while(sk_num(sktmp) > 0)
-				{
-				vtmp = (ASN1_VALUE *)sk_pop(sktmp);
-				ASN1_item_ex_free(&vtmp,
-						ASN1_ITEM_ptr(tt->item));
-				}
-			}
-				
-		if (!*val)
-			{
-			ASN1err(ASN1_F_ASN1_TEMPLATE_NOEXP_D2I,
-						ERR_R_MALLOC_FAILURE);
-			goto err;
-			}
-
-		/* Read as many items as we can */
-		while(len > 0)
-			{
-			ASN1_VALUE *skfield;
-			q = p;
-			/* See if EOC found */
-			if (asn1_check_eoc(&p, len))
-				{
-				if (!sk_eoc)
-					{
-					ASN1err(ASN1_F_ASN1_TEMPLATE_NOEXP_D2I,
-							ASN1_R_UNEXPECTED_EOC);
-					goto err;
-					}
-				len -= p - q;
-				sk_eoc = 0;
-				break;
-				}
-			skfield = NULL;
-			if (!ASN1_item_ex_d2i(&skfield, &p, len,
-						ASN1_ITEM_ptr(tt->item),
-						-1, 0, 0, ctx))
-				{
-				ASN1err(ASN1_F_ASN1_TEMPLATE_NOEXP_D2I,
-					ERR_R_NESTED_ASN1_ERROR);
-				goto err;
-				}
-			len -= p - q;
-			if (!sk_push((STACK *)*val, (char *)skfield))
-				{
-				ASN1err(ASN1_F_ASN1_TEMPLATE_NOEXP_D2I,
-						ERR_R_MALLOC_FAILURE);
-				goto err;
-				}
-			}
-		if (sk_eoc)
-			{
-			ASN1err(ASN1_F_ASN1_TEMPLATE_NOEXP_D2I, ASN1_R_MISSING_EOC);
-			goto err;
-			}
-		}
-	else if (flags & ASN1_TFLG_IMPTAG)
-		{
-		/* IMPLICIT tagging */
-		ret = ASN1_item_ex_d2i(val, &p, len,
-			ASN1_ITEM_ptr(tt->item), tt->tag, aclass, opt, ctx);
-		if (!ret)
-			{
-			ASN1err(ASN1_F_ASN1_TEMPLATE_NOEXP_D2I,
-						ERR_R_NESTED_ASN1_ERROR);
-			goto err;
-			}
-		else if (ret == -1)
-			return -1;
-		}
-	else
-		{
-		/* Nothing special */
-		ret = ASN1_item_ex_d2i(val, &p, len, ASN1_ITEM_ptr(tt->item),
-							-1, 0, opt, ctx);
-		if (!ret)
-			{
-			ASN1err(ASN1_F_ASN1_TEMPLATE_NOEXP_D2I,
-					ERR_R_NESTED_ASN1_ERROR);
-			goto err;
-			}
-		else if (ret == -1)
-			return -1;
-		}
-
-	*in = p;
-	return 1;
-
-	err:
-	ASN1_template_free(val, tt);
-	*val = NULL;
-	return 0;
-	}
-
-static int asn1_d2i_ex_primitive(ASN1_VALUE **pval,
-				const unsigned char **in, long inlen, 
-				const ASN1_ITEM *it,
-				int tag, int aclass, char opt, ASN1_TLC *ctx)
-	{
-	int ret = 0, utype;
-	long plen;
-	char cst, inf, free_cont = 0;
-	const unsigned char *p;
-	BUF_MEM buf;
-	const unsigned char *cont = NULL;
-	long len; 
-	if (!pval)
-		{
-		ASN1err(ASN1_F_ASN1_D2I_EX_PRIMITIVE, ASN1_R_ILLEGAL_NULL);
-		return 0; /* Should never happen */
-		}
-
-	if (it->itype == ASN1_ITYPE_MSTRING)
-		{
-		utype = tag;
-		tag = -1;
-		}
-	else
-		utype = it->utype;
-
-	if (utype == V_ASN1_ANY)
-		{
-		/* If type is ANY need to figure out type from tag */
-		unsigned char oclass;
-		if (tag >= 0)
-			{
-			ASN1err(ASN1_F_ASN1_D2I_EX_PRIMITIVE,
-					ASN1_R_ILLEGAL_TAGGED_ANY);
-			return 0;
-			}
-		if (opt)
-			{
-			ASN1err(ASN1_F_ASN1_D2I_EX_PRIMITIVE,
-					ASN1_R_ILLEGAL_OPTIONAL_ANY);
-			return 0;
-			}
-		p = *in;
-		ret = asn1_check_tlen(NULL, &utype, &oclass, NULL, NULL,
-					&p, inlen, -1, 0, 0, ctx);
-		if (!ret)
-			{
-			ASN1err(ASN1_F_ASN1_D2I_EX_PRIMITIVE,
-					ERR_R_NESTED_ASN1_ERROR);
-			return 0;
-			}
-		if (oclass != V_ASN1_UNIVERSAL)
-			utype = V_ASN1_OTHER;
-		}
-	if (tag == -1)
-		{
-		tag = utype;
-		aclass = V_ASN1_UNIVERSAL;
-		}
-	p = *in;
-	/* Check header */
-	ret = asn1_check_tlen(&plen, NULL, NULL, &inf, &cst,
-				&p, inlen, tag, aclass, opt, ctx);
-	if (!ret)
-		{
-		ASN1err(ASN1_F_ASN1_D2I_EX_PRIMITIVE, ERR_R_NESTED_ASN1_ERROR);
-		return 0;
-		}
-	else if (ret == -1)
-		return -1;
-        ret = 0;
-	/* SEQUENCE, SET and "OTHER" are left in encoded form */
-	if ((utype == V_ASN1_SEQUENCE)
-		|| (utype == V_ASN1_SET) || (utype == V_ASN1_OTHER))
-		{
-		/* Clear context cache for type OTHER because the auto clear
-		 * when we have a exact match wont work
-		 */
-		if (utype == V_ASN1_OTHER)
-			{
-			asn1_tlc_clear(ctx);
-			}
-		/* SEQUENCE and SET must be constructed */
-		else if (!cst)
-			{
-			ASN1err(ASN1_F_ASN1_D2I_EX_PRIMITIVE,
-				ASN1_R_TYPE_NOT_CONSTRUCTED);
-			return 0;
-			}
-
-		cont = *in;
-		/* If indefinite length constructed find the real end */
-		if (inf)
-			{
-			if (!asn1_find_end(&p, plen, inf))
-				 goto err;
-			len = p - cont;
-			}
-		else
-			{
-			len = p - cont + plen;
-			p += plen;
-			buf.data = NULL;
-			}
-		}
-	else if (cst)
-		{
-		buf.length = 0;
-		buf.max = 0;
-		buf.data = NULL;
-		/* Should really check the internal tags are correct but
-		 * some things may get this wrong. The relevant specs
-		 * say that constructed string types should be OCTET STRINGs
-		 * internally irrespective of the type. So instead just check
-		 * for UNIVERSAL class and ignore the tag.
-		 */
-		if (!asn1_collect(&buf, &p, plen, inf, -1, V_ASN1_UNIVERSAL))
-			{
-			free_cont = 1;
-			goto err;
-			}
-		len = buf.length;
-		/* Append a final null to string */
-		if (!BUF_MEM_grow_clean(&buf, len + 1))
-			{
-			ASN1err(ASN1_F_ASN1_D2I_EX_PRIMITIVE,
-						ERR_R_MALLOC_FAILURE);
-			return 0;
-			}
-		buf.data[len] = 0;
-		cont = (const unsigned char *)buf.data;
-		free_cont = 1;
-		}
-	else
-		{
-		cont = p;
-		len = plen;
-		p += plen;
-		}
-
-	/* We now have content length and type: translate into a structure */
-	if (!asn1_ex_c2i(pval, cont, len, utype, &free_cont, it))
-		goto err;
-
-	*in = p;
-	ret = 1;
-	err:
-	if (free_cont && buf.data) OPENSSL_free(buf.data);
-	return ret;
-	}
-
-/* Translate ASN1 content octets into a structure */
-
-int asn1_ex_c2i(ASN1_VALUE **pval, const unsigned char *cont, int len,
-			int utype, char *free_cont, const ASN1_ITEM *it)
-	{
-	ASN1_VALUE **opval = NULL;
-	ASN1_STRING *stmp;
-	ASN1_TYPE *typ = NULL;
-	int ret = 0;
-	const ASN1_PRIMITIVE_FUNCS *pf;
-	ASN1_INTEGER **tint;
-	pf = it->funcs;
-
-	if (pf && pf->prim_c2i)
-		return pf->prim_c2i(pval, cont, len, utype, free_cont, it);
-	/* If ANY type clear type and set pointer to internal value */
-	if (it->utype == V_ASN1_ANY)
-		{
-		if (!*pval)
-			{
-			typ = ASN1_TYPE_new();
-			if (typ == NULL)
-				goto err;
-			*pval = (ASN1_VALUE *)typ;
-			}
-		else
-			typ = (ASN1_TYPE *)*pval;
-
-		if (utype != typ->type)
-			ASN1_TYPE_set(typ, utype, NULL);
-		opval = pval;
-		pval = (ASN1_VALUE **)&typ->value.ptr;
-		}
-	switch(utype)
-		{
-		case V_ASN1_OBJECT:
-		if (!c2i_ASN1_OBJECT((ASN1_OBJECT **)pval, &cont, len))
-			goto err;
-		break;
-
-		case V_ASN1_NULL:
-		if (len)
-			{
-			ASN1err(ASN1_F_ASN1_EX_C2I,
-						ASN1_R_NULL_IS_WRONG_LENGTH);
-			goto err;
-			}
-		*pval = (ASN1_VALUE *)1;
-		break;
-
-		case V_ASN1_BOOLEAN:
-		if (len != 1)
-			{
-			ASN1err(ASN1_F_ASN1_EX_C2I,
-						ASN1_R_BOOLEAN_IS_WRONG_LENGTH);
-			goto err;
-			}
-		else
-			{
-			ASN1_BOOLEAN *tbool;
-			tbool = (ASN1_BOOLEAN *)pval;
-			*tbool = *cont;
-			}
-		break;
-
-		case V_ASN1_BIT_STRING:
-		if (!c2i_ASN1_BIT_STRING((ASN1_BIT_STRING **)pval, &cont, len))
-			goto err;
-		break;
-
-		case V_ASN1_INTEGER:
-		case V_ASN1_NEG_INTEGER:
-		case V_ASN1_ENUMERATED:
-		case V_ASN1_NEG_ENUMERATED:
-		tint = (ASN1_INTEGER **)pval;
-		if (!c2i_ASN1_INTEGER(tint, &cont, len))
-			goto err;
-		/* Fixup type to match the expected form */
-		(*tint)->type = utype | ((*tint)->type & V_ASN1_NEG);
-		break;
-
-		case V_ASN1_OCTET_STRING:
-		case V_ASN1_NUMERICSTRING:
-		case V_ASN1_PRINTABLESTRING:
-		case V_ASN1_T61STRING:
-		case V_ASN1_VIDEOTEXSTRING:
-		case V_ASN1_IA5STRING:
-		case V_ASN1_UTCTIME:
-		case V_ASN1_GENERALIZEDTIME:
-		case V_ASN1_GRAPHICSTRING:
-		case V_ASN1_VISIBLESTRING:
-		case V_ASN1_GENERALSTRING:
-		case V_ASN1_UNIVERSALSTRING:
-		case V_ASN1_BMPSTRING:
-		case V_ASN1_UTF8STRING:
-		case V_ASN1_OTHER:
-		case V_ASN1_SET:
-		case V_ASN1_SEQUENCE:
-		default:
-		/* All based on ASN1_STRING and handled the same */
-		if (!*pval)
-			{
-			stmp = ASN1_STRING_type_new(utype);
-			if (!stmp)
-				{
-				ASN1err(ASN1_F_ASN1_EX_C2I,
-							ERR_R_MALLOC_FAILURE);
-				goto err;
-				}
-			*pval = (ASN1_VALUE *)stmp;
-			}
-		else
-			{
-			stmp = (ASN1_STRING *)*pval;
-			stmp->type = utype;
-			}
-		/* If we've already allocated a buffer use it */
-		if (*free_cont)
-			{
-			if (stmp->data)
-				OPENSSL_free(stmp->data);
-			stmp->data = (unsigned char *)cont; /* UGLY CAST! RL */
-			stmp->length = len;
-			*free_cont = 0;
-			}
-		else
-			{
-			if (!ASN1_STRING_set(stmp, cont, len))
-				{
-				ASN1err(ASN1_F_ASN1_EX_C2I,
-							ERR_R_MALLOC_FAILURE);
-				ASN1_STRING_free(stmp);	
-				*pval = NULL;
-				goto err;
-				}
-			}
-		break;
-		}
-	/* If ASN1_ANY and NULL type fix up value */
-	if (typ && (utype == V_ASN1_NULL))
-		 typ->value.ptr = NULL;
-
-	ret = 1;
-	err:
-	if (!ret)
-		{
-		ASN1_TYPE_free(typ);
-		if (opval)
-			*opval = NULL;
-		}
-	return ret;
-	}
-
-
-/* This function finds the end of an ASN1 structure when passed its maximum
- * length, whether it is indefinite length and a pointer to the content.
- * This is more efficient than calling asn1_collect because it does not
- * recurse on each indefinite length header.
- */
-
-static int asn1_find_end(const unsigned char **in, long len, char inf)
-	{
-	int expected_eoc;
-	long plen;
-	const unsigned char *p = *in, *q;
-	/* If not indefinite length constructed just add length */
-	if (inf == 0)
-		{
-		*in += len;
-		return 1;
-		}
-	expected_eoc = 1;
-	/* Indefinite length constructed form. Find the end when enough EOCs
-	 * are found. If more indefinite length constructed headers
-	 * are encountered increment the expected eoc count otherwise just
-	 * skip to the end of the data.
-	 */
-	while (len > 0)
-		{
-		if(asn1_check_eoc(&p, len))
-			{
-			expected_eoc--;
-			if (expected_eoc == 0)
-				break;
-			len -= 2;
-			continue;
-			}
-		q = p;
-		/* Just read in a header: only care about the length */
-		if(!asn1_check_tlen(&plen, NULL, NULL, &inf, NULL, &p, len,
-				-1, 0, 0, NULL))
-			{
-			ASN1err(ASN1_F_ASN1_FIND_END, ERR_R_NESTED_ASN1_ERROR);
-			return 0;
-			}
-		if (inf)
-			expected_eoc++;
-		else
-			p += plen;
-		len -= p - q;
-		}
-	if (expected_eoc)
-		{
-		ASN1err(ASN1_F_ASN1_FIND_END, ASN1_R_MISSING_EOC);
-		return 0;
-		}
-	*in = p;
-	return 1;
-	}
-/* This function collects the asn1 data from a constructred string
- * type into a buffer. The values of 'in' and 'len' should refer
- * to the contents of the constructed type and 'inf' should be set
- * if it is indefinite length.
- */
-
-static int asn1_collect(BUF_MEM *buf, const unsigned char **in, long len,
-				char inf, int tag, int aclass)
-	{
-	const unsigned char *p, *q;
-	long plen;
-	char cst, ininf;
-	p = *in;
-	inf &= 1;
-	/* If no buffer and not indefinite length constructed just pass over
-	 * the encoded data */
-	if (!buf && !inf)
-		{
-		*in += len;
-		return 1;
-		}
-	while(len > 0)
-		{
-		q = p;
-		/* Check for EOC */
-		if (asn1_check_eoc(&p, len))
-			{
-			/* EOC is illegal outside indefinite length
-			 * constructed form */
-			if (!inf)
-				{
-				ASN1err(ASN1_F_ASN1_COLLECT,
-					ASN1_R_UNEXPECTED_EOC);
-				return 0;
-				}
-			inf = 0;
-			break;
-			}
-
-		if (!asn1_check_tlen(&plen, NULL, NULL, &ininf, &cst, &p,
-					len, tag, aclass, 0, NULL))
-			{
-			ASN1err(ASN1_F_ASN1_COLLECT, ERR_R_NESTED_ASN1_ERROR);
-			return 0;
-			}
-
-		/* If indefinite length constructed update max length */
-		if (cst)
-			{
-#ifdef OPENSSL_ALLOW_NESTED_ASN1_STRINGS
-			if (!asn1_collect(buf, &p, plen, ininf, tag, aclass))
-				return 0;
-#else
-			ASN1err(ASN1_F_ASN1_COLLECT, ASN1_R_NESTED_ASN1_STRING);
-			return 0;
-#endif
-			}
-		else if (plen && !collect_data(buf, &p, plen))
-			return 0;
-		len -= p - q;
-		}
-	if (inf)
-		{
-		ASN1err(ASN1_F_ASN1_COLLECT, ASN1_R_MISSING_EOC);
-		return 0;
-		}
-	*in = p;
-	return 1;
-	}
-
-static int collect_data(BUF_MEM *buf, const unsigned char **p, long plen)
-	{
-	int len;
-	if (buf)
-		{
-		len = buf->length;
-		if (!BUF_MEM_grow_clean(buf, len + plen))
-			{
-			ASN1err(ASN1_F_COLLECT_DATA, ERR_R_MALLOC_FAILURE);
-			return 0;
-			}
-		memcpy(buf->data + len, *p, plen);
-		}
-	*p += plen;
-	return 1;
-	}
-
-/* Check for ASN1 EOC and swallow it if found */
-
-static int asn1_check_eoc(const unsigned char **in, long len)
-	{
-	const unsigned char *p;
-	if (len < 2) return 0;
-	p = *in;
-	if (!p[0] && !p[1])
-		{
-		*in += 2;
-		return 1;
-		}
-	return 0;
-	}
-
-/* Check an ASN1 tag and length: a bit like ASN1_get_object
- * but it sets the length for indefinite length constructed
- * form, we don't know the exact length but we can set an
- * upper bound to the amount of data available minus the
- * header length just read.
- */
-
-static int asn1_check_tlen(long *olen, int *otag, unsigned char *oclass,
-				char *inf, char *cst,
-				const unsigned char **in, long len,
-				int exptag, int expclass, char opt,
-				ASN1_TLC *ctx)
-	{
-	int i;
-	int ptag, pclass;
-	long plen;
-	const unsigned char *p, *q;
-	p = *in;
-	q = p;
-
-	if (ctx && ctx->valid)
-		{
-		i = ctx->ret;
-		plen = ctx->plen;
-		pclass = ctx->pclass;
-		ptag = ctx->ptag;
-		p += ctx->hdrlen;
-		}
-	else
-		{
-		i = ASN1_get_object(&p, &plen, &ptag, &pclass, len);
-		if (ctx)
-			{
-			ctx->ret = i;
-			ctx->plen = plen;
-			ctx->pclass = pclass;
-			ctx->ptag = ptag;
-			ctx->hdrlen = p - q;
-			ctx->valid = 1;
-			/* If definite length, and no error, length +
-			 * header can't exceed total amount of data available. 
-			 */
-			if (!(i & 0x81) && ((plen + ctx->hdrlen) > len))
-				{
-				ASN1err(ASN1_F_ASN1_CHECK_TLEN,
-							ASN1_R_TOO_LONG);
-				asn1_tlc_clear(ctx);
-				return 0;
-				}
-			}
-		}
-
-	if (i & 0x80)
-		{
-		ASN1err(ASN1_F_ASN1_CHECK_TLEN, ASN1_R_BAD_OBJECT_HEADER);
-		asn1_tlc_clear(ctx);
-		return 0;
-		}
-	if (exptag >= 0)
-		{
-		if ((exptag != ptag) || (expclass != pclass))
-			{
-			/* If type is OPTIONAL, not an error:
-			 * indicate missing type.
-			 */
-			if (opt) return -1;
-			asn1_tlc_clear(ctx);
-			ASN1err(ASN1_F_ASN1_CHECK_TLEN, ASN1_R_WRONG_TAG);
-			return 0;
-			}
-		/* We have a tag and class match:
-		 * assume we are going to do something with it */
-		asn1_tlc_clear(ctx);
-		}
-
-	if (i & 1)
-		plen = len - (p - q);
-
-	if (inf)
-		*inf = i & 1;
-
-	if (cst)
-		*cst = i & V_ASN1_CONSTRUCTED;
-
-	if (olen)
-		*olen = plen;
-
-	if (oclass)
-		*oclass = pclass;
-
-	if (otag)
-		*otag = ptag;
-
-	*in = p;
-	return 1;
-	}
diff --git a/crypto/openssl/crypto/asn1/tasn_enc.c b/crypto/openssl/crypto/asn1/tasn_enc.c
deleted file mode 100644
index 25c94aa1d95a..000000000000
--- a/crypto/openssl/crypto/asn1/tasn_enc.c
+++ /dev/null
@@ -1,690 +0,0 @@
-/* tasn_enc.c */
-/* Written by Dr Stephen N Henson (shenson@bigfoot.com) for the OpenSSL
- * project 2000.
- */
-/* ====================================================================
- * Copyright (c) 2000-2004 The OpenSSL Project.  All rights reserved.
- *
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions
- * are met:
- *
- * 1. Redistributions of source code must retain the above copyright
- *    notice, this list of conditions and the following disclaimer. 
- *
- * 2. Redistributions in binary form must reproduce the above copyright
- *    notice, this list of conditions and the following disclaimer in
- *    the documentation and/or other materials provided with the
- *    distribution.
- *
- * 3. All advertising materials mentioning features or use of this
- *    software must display the following acknowledgment:
- *    "This product includes software developed by the OpenSSL Project
- *    for use in the OpenSSL Toolkit. (http://www.OpenSSL.org/)"
- *
- * 4. The names "OpenSSL Toolkit" and "OpenSSL Project" must not be used to
- *    endorse or promote products derived from this software without
- *    prior written permission. For written permission, please contact
- *    licensing@OpenSSL.org.
- *
- * 5. Products derived from this software may not be called "OpenSSL"
- *    nor may "OpenSSL" appear in their names without prior written
- *    permission of the OpenSSL Project.
- *
- * 6. Redistributions of any form whatsoever must retain the following
- *    acknowledgment:
- *    "This product includes software developed by the OpenSSL Project
- *    for use in the OpenSSL Toolkit (http://www.OpenSSL.org/)"
- *
- * THIS SOFTWARE IS PROVIDED BY THE OpenSSL PROJECT ``AS IS'' AND ANY
- * EXPRESSED OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
- * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR
- * PURPOSE ARE DISCLAIMED.  IN NO EVENT SHALL THE OpenSSL PROJECT OR
- * ITS CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
- * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
- * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
- * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
- * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
- * STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
- * ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED
- * OF THE POSSIBILITY OF SUCH DAMAGE.
- * ====================================================================
- *
- * This product includes cryptographic software written by Eric Young
- * (eay@cryptsoft.com).  This product includes software written by Tim
- * Hudson (tjh@cryptsoft.com).
- *
- */
-
-
-#include <stddef.h>
-#include <string.h>
-#include "cryptlib.h"
-#include <openssl/asn1.h>
-#include <openssl/asn1t.h>
-#include <openssl/objects.h>
-
-static int asn1_i2d_ex_primitive(ASN1_VALUE **pval, unsigned char **out,
-					const ASN1_ITEM *it,
-					int tag, int aclass);
-static int asn1_set_seq_out(STACK_OF(ASN1_VALUE) *sk, unsigned char **out,
-					int skcontlen, const ASN1_ITEM *item,
-					int do_sort, int iclass);
-static int asn1_template_ex_i2d(ASN1_VALUE **pval, unsigned char **out,
-					const ASN1_TEMPLATE *tt,
-					int tag, int aclass);
-static int asn1_item_flags_i2d(ASN1_VALUE *val, unsigned char **out,
-					const ASN1_ITEM *it, int flags);
-
-/* Top level i2d equivalents: the 'ndef' variant instructs the encoder
- * to use indefinite length constructed encoding, where appropriate
- */
-
-int ASN1_item_ndef_i2d(ASN1_VALUE *val, unsigned char **out,
-						const ASN1_ITEM *it)
-	{
-	return asn1_item_flags_i2d(val, out, it, ASN1_TFLG_NDEF);
-	}
-
-int ASN1_item_i2d(ASN1_VALUE *val, unsigned char **out, const ASN1_ITEM *it)
-	{
-	return asn1_item_flags_i2d(val, out, it, 0);
-	}
-
-/* Encode an ASN1 item, this is use by the
- * standard 'i2d' function. 'out' points to 
- * a buffer to output the data to.
- *
- * The new i2d has one additional feature. If the output
- * buffer is NULL (i.e. *out == NULL) then a buffer is
- * allocated and populated with the encoding.
- */
-
-static int asn1_item_flags_i2d(ASN1_VALUE *val, unsigned char **out,
-					const ASN1_ITEM *it, int flags)
-	{
-	if (out && !*out)
-		{
-		unsigned char *p, *buf;
-		int len;
-		len = ASN1_item_ex_i2d(&val, NULL, it, -1, flags);
-		if (len <= 0)
-			return len;
-		buf = OPENSSL_malloc(len);
-		if (!buf)
-			return -1;
-		p = buf;
-		ASN1_item_ex_i2d(&val, &p, it, -1, flags);
-		*out = buf;
-		return len;
-		}
-
-	return ASN1_item_ex_i2d(&val, out, it, -1, flags);
-	}
-
-/* Encode an item, taking care of IMPLICIT tagging (if any).
- * This function performs the normal item handling: it can be
- * used in external types.
- */
-
-int ASN1_item_ex_i2d(ASN1_VALUE **pval, unsigned char **out,
-			const ASN1_ITEM *it, int tag, int aclass)
-	{
-	const ASN1_TEMPLATE *tt = NULL;
-	unsigned char *p = NULL;
-	int i, seqcontlen, seqlen, ndef = 1;
-	const ASN1_COMPAT_FUNCS *cf;
-	const ASN1_EXTERN_FUNCS *ef;
-	const ASN1_AUX *aux = it->funcs;
-	ASN1_aux_cb *asn1_cb = 0;
-
-	if ((it->itype != ASN1_ITYPE_PRIMITIVE) && !*pval)
-		return 0;
-
-	if (aux && aux->asn1_cb)
-		 asn1_cb = aux->asn1_cb;
-
-	switch(it->itype)
-		{
-
-		case ASN1_ITYPE_PRIMITIVE:
-		if (it->templates)
-			return asn1_template_ex_i2d(pval, out, it->templates,
-								tag, aclass);
-		return asn1_i2d_ex_primitive(pval, out, it, tag, aclass);
-		break;
-
-		case ASN1_ITYPE_MSTRING:
-		return asn1_i2d_ex_primitive(pval, out, it, -1, aclass);
-
-		case ASN1_ITYPE_CHOICE:
-		if (asn1_cb && !asn1_cb(ASN1_OP_I2D_PRE, pval, it))
-				return 0;
-		i = asn1_get_choice_selector(pval, it);
-		if ((i >= 0) && (i < it->tcount))
-			{
-			ASN1_VALUE **pchval;
-			const ASN1_TEMPLATE *chtt;
-			chtt = it->templates + i;
-			pchval = asn1_get_field_ptr(pval, chtt);
-			return asn1_template_ex_i2d(pchval, out, chtt,
-								-1, aclass);
-			}
-		/* Fixme: error condition if selector out of range */
-		if (asn1_cb && !asn1_cb(ASN1_OP_I2D_POST, pval, it))
-				return 0;
-		break;
-
-		case ASN1_ITYPE_EXTERN:
-		/* If new style i2d it does all the work */
-		ef = it->funcs;
-		return ef->asn1_ex_i2d(pval, out, it, tag, aclass);
-
-		case ASN1_ITYPE_COMPAT:
-		/* old style hackery... */
-		cf = it->funcs;
-		if (out)
-			p = *out;
-		i = cf->asn1_i2d(*pval, out);
-		/* Fixup for IMPLICIT tag: note this messes up for tags > 30,
-		 * but so did the old code. Tags > 30 are very rare anyway.
-		 */
-		if (out && (tag != -1))
-			*p = aclass | tag | (*p & V_ASN1_CONSTRUCTED);
-		return i;
-		
-		case ASN1_ITYPE_NDEF_SEQUENCE:
-		/* Use indefinite length constructed if requested */
-		if (aclass & ASN1_TFLG_NDEF) ndef = 2;
-		/* fall through */
-
-		case ASN1_ITYPE_SEQUENCE:
-		i = asn1_enc_restore(&seqcontlen, out, pval, it);
-		/* An error occurred */
-		if (i < 0)
-			return 0;
-		/* We have a valid cached encoding... */
-		if (i > 0)
-			return seqcontlen;
-		/* Otherwise carry on */
-		seqcontlen = 0;
-		/* If no IMPLICIT tagging set to SEQUENCE, UNIVERSAL */
-		if (tag == -1)
-			{
-			tag = V_ASN1_SEQUENCE;
-			/* Retain any other flags in aclass */
-			aclass = (aclass & ~ASN1_TFLG_TAG_CLASS)
-					| V_ASN1_UNIVERSAL;
-			}
-		if (asn1_cb && !asn1_cb(ASN1_OP_I2D_PRE, pval, it))
-				return 0;
-		/* First work out sequence content length */
-		for (i = 0, tt = it->templates; i < it->tcount; tt++, i++)
-			{
-			const ASN1_TEMPLATE *seqtt;
-			ASN1_VALUE **pseqval;
-			seqtt = asn1_do_adb(pval, tt, 1);
-			if (!seqtt)
-				return 0;
-			pseqval = asn1_get_field_ptr(pval, seqtt);
-			/* FIXME: check for errors in enhanced version */
-			seqcontlen += asn1_template_ex_i2d(pseqval, NULL, seqtt,
-								-1, aclass);
-			}
-
-		seqlen = ASN1_object_size(ndef, seqcontlen, tag);
-		if (!out)
-			return seqlen;
-		/* Output SEQUENCE header */
-		ASN1_put_object(out, ndef, seqcontlen, tag, aclass);
-		for (i = 0, tt = it->templates; i < it->tcount; tt++, i++)
-			{
-			const ASN1_TEMPLATE *seqtt;
-			ASN1_VALUE **pseqval;
-			seqtt = asn1_do_adb(pval, tt, 1);
-			if (!seqtt)
-				return 0;
-			pseqval = asn1_get_field_ptr(pval, seqtt);
-			/* FIXME: check for errors in enhanced version */
-			asn1_template_ex_i2d(pseqval, out, seqtt, -1, aclass);
-			}
-		if (ndef == 2)
-			ASN1_put_eoc(out);
-		if (asn1_cb  && !asn1_cb(ASN1_OP_I2D_POST, pval, it))
-				return 0;
-		return seqlen;
-
-		default:
-		return 0;
-
-		}
-	return 0;
-	}
-
-int ASN1_template_i2d(ASN1_VALUE **pval, unsigned char **out,
-							const ASN1_TEMPLATE *tt)
-	{
-	return asn1_template_ex_i2d(pval, out, tt, -1, 0);
-	}
-
-static int asn1_template_ex_i2d(ASN1_VALUE **pval, unsigned char **out,
-				const ASN1_TEMPLATE *tt, int tag, int iclass)
-	{
-	int i, ret, flags, ttag, tclass, ndef;
-	flags = tt->flags;
-	/* Work out tag and class to use: tagging may come
-	 * either from the template or the arguments, not both
-	 * because this would create ambiguity. Additionally
-	 * the iclass argument may contain some additional flags
-	 * which should be noted and passed down to other levels.
-	 */
-	if (flags & ASN1_TFLG_TAG_MASK)
-		{
-		/* Error if argument and template tagging */
-		if (tag != -1)
-			/* FIXME: error code here */
-			return -1;
-		/* Get tagging from template */
-		ttag = tt->tag;
-		tclass = flags & ASN1_TFLG_TAG_CLASS;
-		}
-	else if (tag != -1)
-		{
-		/* No template tagging, get from arguments */
-		ttag = tag;
-		tclass = iclass & ASN1_TFLG_TAG_CLASS;
-		}
-	else
-		{
-		ttag = -1;
-		tclass = 0;
-		}
-	/* 
-	 * Remove any class mask from iflag.
-	 */
-	iclass &= ~ASN1_TFLG_TAG_CLASS;
-
-	/* At this point 'ttag' contains the outer tag to use,
-	 * 'tclass' is the class and iclass is any flags passed
-	 * to this function.
-	 */
-
-	/* if template and arguments require ndef, use it */
-	if ((flags & ASN1_TFLG_NDEF) && (iclass & ASN1_TFLG_NDEF))
-		ndef = 2;
-	else ndef = 1;
-
-	if (flags & ASN1_TFLG_SK_MASK)
-		{
-		/* SET OF, SEQUENCE OF */
-		STACK_OF(ASN1_VALUE) *sk = (STACK_OF(ASN1_VALUE) *)*pval;
-		int isset, sktag, skaclass;
-		int skcontlen, sklen;
-		ASN1_VALUE *skitem;
-
-		if (!*pval)
-			return 0;
-
-		if (flags & ASN1_TFLG_SET_OF)
-			{
-			isset = 1;
-			/* 2 means we reorder */
-			if (flags & ASN1_TFLG_SEQUENCE_OF)
-				isset = 2;
-			}
-		else isset = 0;
-
-		/* Work out inner tag value: if EXPLICIT
-		 * or no tagging use underlying type.
-		 */
-		if ((ttag != -1) && !(flags & ASN1_TFLG_EXPTAG))
-			{
-			sktag = ttag;
-			skaclass = tclass;
-			}
-		else
-			{
-			skaclass = V_ASN1_UNIVERSAL;
-			if (isset)
-				sktag = V_ASN1_SET;
-			else sktag = V_ASN1_SEQUENCE;
-			}
-
-		/* Determine total length of items */
-		skcontlen = 0;
-		for (i = 0; i < sk_ASN1_VALUE_num(sk); i++)
-			{
-			skitem = sk_ASN1_VALUE_value(sk, i);
-			skcontlen += ASN1_item_ex_i2d(&skitem, NULL,
-						ASN1_ITEM_ptr(tt->item),
-							-1, iclass);
-			}
-		sklen = ASN1_object_size(ndef, skcontlen, sktag);
-		/* If EXPLICIT need length of surrounding tag */
-		if (flags & ASN1_TFLG_EXPTAG)
-			ret = ASN1_object_size(ndef, sklen, ttag);
-		else ret = sklen;
-
-		if (!out)
-			return ret;
-
-		/* Now encode this lot... */
-		/* EXPLICIT tag */
-		if (flags & ASN1_TFLG_EXPTAG)
-			ASN1_put_object(out, ndef, sklen, ttag, tclass);
-		/* SET or SEQUENCE and IMPLICIT tag */
-		ASN1_put_object(out, ndef, skcontlen, sktag, skaclass);
-		/* And the stuff itself */
-		asn1_set_seq_out(sk, out, skcontlen, ASN1_ITEM_ptr(tt->item),
-								isset, iclass);
-		if (ndef == 2)
-			{
-			ASN1_put_eoc(out);
-			if (flags & ASN1_TFLG_EXPTAG)
-				ASN1_put_eoc(out);
-			}
-
-		return ret;
-		}
-
-	if (flags & ASN1_TFLG_EXPTAG)
-		{
-		/* EXPLICIT tagging */
-		/* Find length of tagged item */
-		i = ASN1_item_ex_i2d(pval, NULL, ASN1_ITEM_ptr(tt->item),
-								-1, iclass);
-		if (!i)
-			return 0;
-		/* Find length of EXPLICIT tag */
-		ret = ASN1_object_size(ndef, i, ttag);
-		if (out)
-			{
-			/* Output tag and item */
-			ASN1_put_object(out, ndef, i, ttag, tclass);
-			ASN1_item_ex_i2d(pval, out, ASN1_ITEM_ptr(tt->item),
-								-1, iclass);
-			if (ndef == 2)
-				ASN1_put_eoc(out);
-			}
-		return ret;
-		}
-
-	/* Either normal or IMPLICIT tagging: combine class and flags */
-	return ASN1_item_ex_i2d(pval, out, ASN1_ITEM_ptr(tt->item),
-						ttag, tclass | iclass);
-
-}
-
-/* Temporary structure used to hold DER encoding of items for SET OF */
-
-typedef	struct {
-	unsigned char *data;
-	int length;
-	ASN1_VALUE *field;
-} DER_ENC;
-
-static int der_cmp(const void *a, const void *b)
-	{
-	const DER_ENC *d1 = a, *d2 = b;
-	int cmplen, i;
-	cmplen = (d1->length < d2->length) ? d1->length : d2->length;
-	i = memcmp(d1->data, d2->data, cmplen);
-	if (i)
-		return i;
-	return d1->length - d2->length;
-	}
-
-/* Output the content octets of SET OF or SEQUENCE OF */
-
-static int asn1_set_seq_out(STACK_OF(ASN1_VALUE) *sk, unsigned char **out,
-					int skcontlen, const ASN1_ITEM *item,
-					int do_sort, int iclass)
-	{
-	int i;
-	ASN1_VALUE *skitem;
-	unsigned char *tmpdat = NULL, *p = NULL;
-	DER_ENC *derlst = NULL, *tder;
-	if (do_sort)
-		 {
-		/* Don't need to sort less than 2 items */
-		if (sk_ASN1_VALUE_num(sk) < 2)
-			do_sort = 0;
-		else
-			{
-			derlst = OPENSSL_malloc(sk_ASN1_VALUE_num(sk)
-						* sizeof(*derlst));
-			tmpdat = OPENSSL_malloc(skcontlen);
-			if (!derlst || !tmpdat)
-				return 0;
-			}
-		}
-	/* If not sorting just output each item */
-	if (!do_sort)
-		{
-		for (i = 0; i < sk_ASN1_VALUE_num(sk); i++)
-			{
-			skitem = sk_ASN1_VALUE_value(sk, i);
-			ASN1_item_ex_i2d(&skitem, out, item, -1, iclass);
-			}
-		return 1;
-		}
-	p = tmpdat;
-
-	/* Doing sort: build up a list of each member's DER encoding */
-	for (i = 0, tder = derlst; i < sk_ASN1_VALUE_num(sk); i++, tder++)
-		{
-		skitem = sk_ASN1_VALUE_value(sk, i);
-		tder->data = p;
-		tder->length = ASN1_item_ex_i2d(&skitem, &p, item, -1, iclass);
-		tder->field = skitem;
-		}
-
-	/* Now sort them */
-	qsort(derlst, sk_ASN1_VALUE_num(sk), sizeof(*derlst), der_cmp);
-	/* Output sorted DER encoding */	
-	p = *out;
-	for (i = 0, tder = derlst; i < sk_ASN1_VALUE_num(sk); i++, tder++)
-		{
-		memcpy(p, tder->data, tder->length);
-		p += tder->length;
-		}
-	*out = p;
-	/* If do_sort is 2 then reorder the STACK */
-	if (do_sort == 2)
-		{
-		for (i = 0, tder = derlst; i < sk_ASN1_VALUE_num(sk);
-							i++, tder++)
-			sk_ASN1_VALUE_set(sk, i, tder->field);
-		}
-	OPENSSL_free(derlst);
-	OPENSSL_free(tmpdat);
-	return 1;
-	}
-
-static int asn1_i2d_ex_primitive(ASN1_VALUE **pval, unsigned char **out,
-				const ASN1_ITEM *it, int tag, int aclass)
-	{
-	int len;
-	int utype;
-	int usetag;
-	int ndef = 0;
-
-	utype = it->utype;
-
-	/* Get length of content octets and maybe find
-	 * out the underlying type.
-	 */
-
-	len = asn1_ex_i2c(pval, NULL, &utype, it);
-
-	/* If SEQUENCE, SET or OTHER then header is
-	 * included in pseudo content octets so don't
-	 * include tag+length. We need to check here
-	 * because the call to asn1_ex_i2c() could change
-	 * utype.
-	 */
-	if ((utype == V_ASN1_SEQUENCE) || (utype == V_ASN1_SET) ||
-	   (utype == V_ASN1_OTHER))
-		usetag = 0;
-	else usetag = 1;
-
-	/* -1 means omit type */
-
-	if (len == -1)
-		return 0;
-
-	/* -2 return is special meaning use ndef */
-	if (len == -2)
-		{
-		ndef = 2;
-		len = 0;
-		}
-
-	/* If not implicitly tagged get tag from underlying type */
-	if (tag == -1) tag = utype;
-
-	/* Output tag+length followed by content octets */
-	if (out)
-		{
-		if (usetag)
-			ASN1_put_object(out, ndef, len, tag, aclass);
-		asn1_ex_i2c(pval, *out, &utype, it);
-		if (ndef)
-			ASN1_put_eoc(out);
-		else
-			*out += len;
-		}
-
-	if (usetag)
-		return ASN1_object_size(ndef, len, tag);
-	return len;
-	}
-
-/* Produce content octets from a structure */
-
-int asn1_ex_i2c(ASN1_VALUE **pval, unsigned char *cout, int *putype,
-				const ASN1_ITEM *it)
-	{
-	ASN1_BOOLEAN *tbool = NULL;
-	ASN1_STRING *strtmp;
-	ASN1_OBJECT *otmp;
-	int utype;
-	unsigned char *cont, c;
-	int len;
-	const ASN1_PRIMITIVE_FUNCS *pf;
-	pf = it->funcs;
-	if (pf && pf->prim_i2c)
-		return pf->prim_i2c(pval, cout, putype, it);
-
-	/* Should type be omitted? */
-	if ((it->itype != ASN1_ITYPE_PRIMITIVE)
-		|| (it->utype != V_ASN1_BOOLEAN))
-		{
-		if (!*pval) return -1;
-		}
-
-	if (it->itype == ASN1_ITYPE_MSTRING)
-		{
-		/* If MSTRING type set the underlying type */
-		strtmp = (ASN1_STRING *)*pval;
-		utype = strtmp->type;
-		*putype = utype;
-		}
-	else if (it->utype == V_ASN1_ANY)
-		{
-		/* If ANY set type and pointer to value */
-		ASN1_TYPE *typ;
-		typ = (ASN1_TYPE *)*pval;
-		utype = typ->type;
-		*putype = utype;
-		pval = (ASN1_VALUE **)&typ->value.ptr;
-		}
-	else utype = *putype;
-
-	switch(utype)
-		{
-		case V_ASN1_OBJECT:
-		otmp = (ASN1_OBJECT *)*pval;
-		cont = otmp->data;
-		len = otmp->length;
-		break;
-
-		case V_ASN1_NULL:
-		cont = NULL;
-		len = 0;
-		break;
-
-		case V_ASN1_BOOLEAN:
-		tbool = (ASN1_BOOLEAN *)pval;
-		if (*tbool == -1)
-			return -1;
-		if (it->utype != V_ASN1_ANY)
-			{
-			/* Default handling if value == size field then omit */
-			if (*tbool && (it->size > 0))
-				return -1;
-			if (!*tbool && !it->size)
-				return -1;
-			}
-		c = (unsigned char)*tbool;
-		cont = &c;
-		len = 1;
-		break;
-
-		case V_ASN1_BIT_STRING:
-		return i2c_ASN1_BIT_STRING((ASN1_BIT_STRING *)*pval,
-							cout ? &cout : NULL);
-		break;
-
-		case V_ASN1_INTEGER:
-		case V_ASN1_NEG_INTEGER:
-		case V_ASN1_ENUMERATED:
-		case V_ASN1_NEG_ENUMERATED:
-		/* These are all have the same content format
-		 * as ASN1_INTEGER
-		 */
-		return i2c_ASN1_INTEGER((ASN1_INTEGER *)*pval,
-							cout ? &cout : NULL);
-		break;
-
-		case V_ASN1_OCTET_STRING:
-		case V_ASN1_NUMERICSTRING:
-		case V_ASN1_PRINTABLESTRING:
-		case V_ASN1_T61STRING:
-		case V_ASN1_VIDEOTEXSTRING:
-		case V_ASN1_IA5STRING:
-		case V_ASN1_UTCTIME:
-		case V_ASN1_GENERALIZEDTIME:
-		case V_ASN1_GRAPHICSTRING:
-		case V_ASN1_VISIBLESTRING:
-		case V_ASN1_GENERALSTRING:
-		case V_ASN1_UNIVERSALSTRING:
-		case V_ASN1_BMPSTRING:
-		case V_ASN1_UTF8STRING:
-		case V_ASN1_SEQUENCE:
-		case V_ASN1_SET:
-		default:
-		/* All based on ASN1_STRING and handled the same */
-		strtmp = (ASN1_STRING *)*pval;
-		/* Special handling for NDEF */
-		if ((it->size == ASN1_TFLG_NDEF)
-			&& (strtmp->flags & ASN1_STRING_FLAG_NDEF))
-			{
-			if (cout)
-				{
-				strtmp->data = cout;
-				strtmp->length = 0;
-				}
-			/* Special return code */
-			return -2;
-			}
-		cont = strtmp->data;
-		len = strtmp->length;
-
-		break;
-
-		}
-	if (cout && len)
-		memcpy(cout, cont, len);
-	return len;
-	}
diff --git a/crypto/openssl/crypto/asn1/tasn_fre.c b/crypto/openssl/crypto/asn1/tasn_fre.c
deleted file mode 100644
index b68b66a23b18..000000000000
--- a/crypto/openssl/crypto/asn1/tasn_fre.c
+++ /dev/null
@@ -1,268 +0,0 @@
-/* tasn_fre.c */
-/* Written by Dr Stephen N Henson (shenson@bigfoot.com) for the OpenSSL
- * project 2000.
- */
-/* ====================================================================
- * Copyright (c) 2000 The OpenSSL Project.  All rights reserved.
- *
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions
- * are met:
- *
- * 1. Redistributions of source code must retain the above copyright
- *    notice, this list of conditions and the following disclaimer. 
- *
- * 2. Redistributions in binary form must reproduce the above copyright
- *    notice, this list of conditions and the following disclaimer in
- *    the documentation and/or other materials provided with the
- *    distribution.
- *
- * 3. All advertising materials mentioning features or use of this
- *    software must display the following acknowledgment:
- *    "This product includes software developed by the OpenSSL Project
- *    for use in the OpenSSL Toolkit. (http://www.OpenSSL.org/)"
- *
- * 4. The names "OpenSSL Toolkit" and "OpenSSL Project" must not be used to
- *    endorse or promote products derived from this software without
- *    prior written permission. For written permission, please contact
- *    licensing@OpenSSL.org.
- *
- * 5. Products derived from this software may not be called "OpenSSL"
- *    nor may "OpenSSL" appear in their names without prior written
- *    permission of the OpenSSL Project.
- *
- * 6. Redistributions of any form whatsoever must retain the following
- *    acknowledgment:
- *    "This product includes software developed by the OpenSSL Project
- *    for use in the OpenSSL Toolkit (http://www.OpenSSL.org/)"
- *
- * THIS SOFTWARE IS PROVIDED BY THE OpenSSL PROJECT ``AS IS'' AND ANY
- * EXPRESSED OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
- * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR
- * PURPOSE ARE DISCLAIMED.  IN NO EVENT SHALL THE OpenSSL PROJECT OR
- * ITS CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
- * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
- * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
- * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
- * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
- * STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
- * ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED
- * OF THE POSSIBILITY OF SUCH DAMAGE.
- * ====================================================================
- *
- * This product includes cryptographic software written by Eric Young
- * (eay@cryptsoft.com).  This product includes software written by Tim
- * Hudson (tjh@cryptsoft.com).
- *
- */
-
-
-#include <stddef.h>
-#include <openssl/asn1.h>
-#include <openssl/asn1t.h>
-#include <openssl/objects.h>
-
-static void asn1_item_combine_free(ASN1_VALUE **pval, const ASN1_ITEM *it, int combine);
-
-/* Free up an ASN1 structure */
-
-void ASN1_item_free(ASN1_VALUE *val, const ASN1_ITEM *it)
-	{
-	asn1_item_combine_free(&val, it, 0);
-	}
-
-void ASN1_item_ex_free(ASN1_VALUE **pval, const ASN1_ITEM *it)
-	{
-	asn1_item_combine_free(pval, it, 0);
-	}
-
-static void asn1_item_combine_free(ASN1_VALUE **pval, const ASN1_ITEM *it, int combine)
-	{
-	const ASN1_TEMPLATE *tt = NULL, *seqtt;
-	const ASN1_EXTERN_FUNCS *ef;
-	const ASN1_COMPAT_FUNCS *cf;
-	const ASN1_AUX *aux = it->funcs;
-	ASN1_aux_cb *asn1_cb;
-	int i;
-	if (!pval)
-		return;
-	if ((it->itype != ASN1_ITYPE_PRIMITIVE) && !*pval)
-		return;
-	if (aux && aux->asn1_cb)
-		asn1_cb = aux->asn1_cb;
-	else
-		asn1_cb = 0;
-
-	switch(it->itype)
-		{
-
-		case ASN1_ITYPE_PRIMITIVE:
-		if (it->templates)
-			ASN1_template_free(pval, it->templates);
-		else
-			ASN1_primitive_free(pval, it);
-		break;
-
-		case ASN1_ITYPE_MSTRING:
-		ASN1_primitive_free(pval, it);
-		break;
-
-		case ASN1_ITYPE_CHOICE:
-		if (asn1_cb)
-			{
-			i = asn1_cb(ASN1_OP_FREE_PRE, pval, it);
-			if (i == 2)
-				return;
-			}
-		i = asn1_get_choice_selector(pval, it);
-		if (asn1_cb)
-			asn1_cb(ASN1_OP_FREE_PRE, pval, it);
-		if ((i >= 0) && (i < it->tcount))
-			{
-			ASN1_VALUE **pchval;
-			tt = it->templates + i;
-			pchval = asn1_get_field_ptr(pval, tt);
-			ASN1_template_free(pchval, tt);
-			}
-		if (asn1_cb)
-			asn1_cb(ASN1_OP_FREE_POST, pval, it);
-		if (!combine)
-			{
-			OPENSSL_free(*pval);
-			*pval = NULL;
-			}
-		break;
-
-		case ASN1_ITYPE_COMPAT:
-		cf = it->funcs;
-		if (cf && cf->asn1_free)
-			cf->asn1_free(*pval);
-		break;
-
-		case ASN1_ITYPE_EXTERN:
-		ef = it->funcs;
-		if (ef && ef->asn1_ex_free)
-			ef->asn1_ex_free(pval, it);
-		break;
-
-		case ASN1_ITYPE_NDEF_SEQUENCE:
-		case ASN1_ITYPE_SEQUENCE:
-		if (asn1_do_lock(pval, -1, it) > 0)
-			return;
-		if (asn1_cb)
-			{
-			i = asn1_cb(ASN1_OP_FREE_PRE, pval, it);
-			if (i == 2)
-				return;
-			}		
-		asn1_enc_free(pval, it);
-		/* If we free up as normal we will invalidate any
-		 * ANY DEFINED BY field and we wont be able to 
-		 * determine the type of the field it defines. So
-		 * free up in reverse order.
-		 */
-		tt = it->templates + it->tcount - 1;
-		for (i = 0; i < it->tcount; tt--, i++)
-			{
-			ASN1_VALUE **pseqval;
-			seqtt = asn1_do_adb(pval, tt, 0);
-			if (!seqtt)
-				continue;
-			pseqval = asn1_get_field_ptr(pval, seqtt);
-			ASN1_template_free(pseqval, seqtt);
-			}
-		if (asn1_cb)
-			asn1_cb(ASN1_OP_FREE_POST, pval, it);
-		if (!combine)
-			{
-			OPENSSL_free(*pval);
-			*pval = NULL;
-			}
-		break;
-		}
-	}
-
-void ASN1_template_free(ASN1_VALUE **pval, const ASN1_TEMPLATE *tt)
-	{
-	int i;
-	if (tt->flags & ASN1_TFLG_SK_MASK)
-		{
-		STACK_OF(ASN1_VALUE) *sk = (STACK_OF(ASN1_VALUE) *)*pval;
-		for (i = 0; i < sk_ASN1_VALUE_num(sk); i++)
-			{
-			ASN1_VALUE *vtmp;
-			vtmp = sk_ASN1_VALUE_value(sk, i);
-			asn1_item_combine_free(&vtmp, ASN1_ITEM_ptr(tt->item),
-									0);
-			}
-		sk_ASN1_VALUE_free(sk);
-		*pval = NULL;
-		}
-	else
-		asn1_item_combine_free(pval, ASN1_ITEM_ptr(tt->item),
-						tt->flags & ASN1_TFLG_COMBINE);
-	}
-
-void ASN1_primitive_free(ASN1_VALUE **pval, const ASN1_ITEM *it)
-	{
-	int utype;
-	if (it)
-		{
-		const ASN1_PRIMITIVE_FUNCS *pf;
-		pf = it->funcs;
-		if (pf && pf->prim_free)
-			{
-			pf->prim_free(pval, it);
-			return;
-			}
-		}
-	/* Special case: if 'it' is NULL free contents of ASN1_TYPE */
-	if (!it)
-		{
-		ASN1_TYPE *typ = (ASN1_TYPE *)*pval;
-		utype = typ->type;
-		pval = (ASN1_VALUE **)&typ->value.ptr;
-		if (!*pval)
-			return;
-		}
-	else if (it->itype == ASN1_ITYPE_MSTRING)
-		{
-		utype = -1;
-		if (!*pval)
-			return;
-		}
-	else
-		{
-		utype = it->utype;
-		if ((utype != V_ASN1_BOOLEAN) && !*pval)
-			return;
-		}
-
-	switch(utype)
-		{
-		case V_ASN1_OBJECT:
-		ASN1_OBJECT_free((ASN1_OBJECT *)*pval);
-		break;
-
-		case V_ASN1_BOOLEAN:
-		if (it)
-			*(ASN1_BOOLEAN *)pval = it->size;
-		else
-			*(ASN1_BOOLEAN *)pval = -1;
-		return;
-
-		case V_ASN1_NULL:
-		break;
-
-		case V_ASN1_ANY:
-		ASN1_primitive_free(pval, NULL);
-		OPENSSL_free(*pval);
-		break;
-
-		default:
-		ASN1_STRING_free((ASN1_STRING *)*pval);
-		*pval = NULL;
-		break;
-		}
-	*pval = NULL;
-	}
diff --git a/crypto/openssl/crypto/asn1/tasn_new.c b/crypto/openssl/crypto/asn1/tasn_new.c
deleted file mode 100644
index 531dad365c0e..000000000000
--- a/crypto/openssl/crypto/asn1/tasn_new.c
+++ /dev/null
@@ -1,395 +0,0 @@
-/* tasn_new.c */
-/* Written by Dr Stephen N Henson (shenson@bigfoot.com) for the OpenSSL
- * project 2000.
- */
-/* ====================================================================
- * Copyright (c) 2000-2004 The OpenSSL Project.  All rights reserved.
- *
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions
- * are met:
- *
- * 1. Redistributions of source code must retain the above copyright
- *    notice, this list of conditions and the following disclaimer. 
- *
- * 2. Redistributions in binary form must reproduce the above copyright
- *    notice, this list of conditions and the following disclaimer in
- *    the documentation and/or other materials provided with the
- *    distribution.
- *
- * 3. All advertising materials mentioning features or use of this
- *    software must display the following acknowledgment:
- *    "This product includes software developed by the OpenSSL Project
- *    for use in the OpenSSL Toolkit. (http://www.OpenSSL.org/)"
- *
- * 4. The names "OpenSSL Toolkit" and "OpenSSL Project" must not be used to
- *    endorse or promote products derived from this software without
- *    prior written permission. For written permission, please contact
- *    licensing@OpenSSL.org.
- *
- * 5. Products derived from this software may not be called "OpenSSL"
- *    nor may "OpenSSL" appear in their names without prior written
- *    permission of the OpenSSL Project.
- *
- * 6. Redistributions of any form whatsoever must retain the following
- *    acknowledgment:
- *    "This product includes software developed by the OpenSSL Project
- *    for use in the OpenSSL Toolkit (http://www.OpenSSL.org/)"
- *
- * THIS SOFTWARE IS PROVIDED BY THE OpenSSL PROJECT ``AS IS'' AND ANY
- * EXPRESSED OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
- * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR
- * PURPOSE ARE DISCLAIMED.  IN NO EVENT SHALL THE OpenSSL PROJECT OR
- * ITS CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
- * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
- * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
- * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
- * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
- * STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
- * ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED
- * OF THE POSSIBILITY OF SUCH DAMAGE.
- * ====================================================================
- *
- * This product includes cryptographic software written by Eric Young
- * (eay@cryptsoft.com).  This product includes software written by Tim
- * Hudson (tjh@cryptsoft.com).
- *
- */
-
-
-#include <stddef.h>
-#include <openssl/asn1.h>
-#include <openssl/objects.h>
-#include <openssl/err.h>
-#include <openssl/asn1t.h>
-#include <string.h>
-
-static int asn1_item_ex_combine_new(ASN1_VALUE **pval, const ASN1_ITEM *it,
-								int combine);
-static void asn1_item_clear(ASN1_VALUE **pval, const ASN1_ITEM *it);
-static void asn1_template_clear(ASN1_VALUE **pval, const ASN1_TEMPLATE *tt);
-void asn1_primitive_clear(ASN1_VALUE **pval, const ASN1_ITEM *it);
-
-ASN1_VALUE *ASN1_item_new(const ASN1_ITEM *it)
-	{
-	ASN1_VALUE *ret = NULL;
-	if (ASN1_item_ex_new(&ret, it) > 0)
-		return ret;
-	return NULL;
-	}
-
-/* Allocate an ASN1 structure */
-
-int ASN1_item_ex_new(ASN1_VALUE **pval, const ASN1_ITEM *it)
-	{
-	return asn1_item_ex_combine_new(pval, it, 0);
-	}
-
-static int asn1_item_ex_combine_new(ASN1_VALUE **pval, const ASN1_ITEM *it,
-								int combine)
-	{
-	const ASN1_TEMPLATE *tt = NULL;
-	const ASN1_COMPAT_FUNCS *cf;
-	const ASN1_EXTERN_FUNCS *ef;
-	const ASN1_AUX *aux = it->funcs;
-	ASN1_aux_cb *asn1_cb;
-	ASN1_VALUE **pseqval;
-	int i;
-	if (aux && aux->asn1_cb)
-		asn1_cb = aux->asn1_cb;
-	else
-		asn1_cb = 0;
-
-	if (!combine) *pval = NULL;
-
-#ifdef CRYPTO_MDEBUG
-	if (it->sname)
-		CRYPTO_push_info(it->sname);
-#endif
-
-	switch(it->itype)
-		{
-
-		case ASN1_ITYPE_EXTERN:
-		ef = it->funcs;
-		if (ef && ef->asn1_ex_new)
-			{
-			if (!ef->asn1_ex_new(pval, it))
-				goto memerr;
-			}
-		break;
-
-		case ASN1_ITYPE_COMPAT:
-		cf = it->funcs;
-		if (cf && cf->asn1_new) {
-			*pval = cf->asn1_new();
-			if (!*pval)
-				goto memerr;
-		}
-		break;
-
-		case ASN1_ITYPE_PRIMITIVE:
-		if (it->templates)
-			{
-			if (!ASN1_template_new(pval, it->templates))
-				goto memerr;
-			}
-		else if (!ASN1_primitive_new(pval, it))
-				goto memerr;
-		break;
-
-		case ASN1_ITYPE_MSTRING:
-		if (!ASN1_primitive_new(pval, it))
-				goto memerr;
-		break;
-
-		case ASN1_ITYPE_CHOICE:
-		if (asn1_cb)
-			{
-			i = asn1_cb(ASN1_OP_NEW_PRE, pval, it);
-			if (!i)
-				goto auxerr;
-			if (i==2)
-				{
-#ifdef CRYPTO_MDEBUG
-				if (it->sname)
-					CRYPTO_pop_info();
-#endif
-				return 1;
-				}
-			}
-		if (!combine)
-			{
-			*pval = OPENSSL_malloc(it->size);
-			if (!*pval)
-				goto memerr;
-			memset(*pval, 0, it->size);
-			}
-		asn1_set_choice_selector(pval, -1, it);
-		if (asn1_cb && !asn1_cb(ASN1_OP_NEW_POST, pval, it))
-				goto auxerr;
-		break;
-
-		case ASN1_ITYPE_NDEF_SEQUENCE:
-		case ASN1_ITYPE_SEQUENCE:
-		if (asn1_cb)
-			{
-			i = asn1_cb(ASN1_OP_NEW_PRE, pval, it);
-			if (!i)
-				goto auxerr;
-			if (i==2)
-				{
-#ifdef CRYPTO_MDEBUG
-				if (it->sname)
-					CRYPTO_pop_info();
-#endif
-				return 1;
-				}
-			}
-		if (!combine)
-			{
-			*pval = OPENSSL_malloc(it->size);
-			if (!*pval)
-				goto memerr;
-			memset(*pval, 0, it->size);
-			asn1_do_lock(pval, 0, it);
-			asn1_enc_init(pval, it);
-			}
-		for (i = 0, tt = it->templates; i < it->tcount; tt++, i++)
-			{
-			pseqval = asn1_get_field_ptr(pval, tt);
-			if (!ASN1_template_new(pseqval, tt))
-				goto memerr;
-			}
-		if (asn1_cb && !asn1_cb(ASN1_OP_NEW_POST, pval, it))
-				goto auxerr;
-		break;
-	}
-#ifdef CRYPTO_MDEBUG
-	if (it->sname) CRYPTO_pop_info();
-#endif
-	return 1;
-
-	memerr:
-	ASN1err(ASN1_F_ASN1_ITEM_EX_COMBINE_NEW, ERR_R_MALLOC_FAILURE);
-#ifdef CRYPTO_MDEBUG
-	if (it->sname) CRYPTO_pop_info();
-#endif
-	return 0;
-
-	auxerr:
-	ASN1err(ASN1_F_ASN1_ITEM_EX_COMBINE_NEW, ASN1_R_AUX_ERROR);
-	ASN1_item_ex_free(pval, it);
-#ifdef CRYPTO_MDEBUG
-	if (it->sname) CRYPTO_pop_info();
-#endif
-	return 0;
-
-	}
-
-static void asn1_item_clear(ASN1_VALUE **pval, const ASN1_ITEM *it)
-	{
-	const ASN1_EXTERN_FUNCS *ef;
-
-	switch(it->itype)
-		{
-
-		case ASN1_ITYPE_EXTERN:
-		ef = it->funcs;
-		if (ef && ef->asn1_ex_clear) 
-			ef->asn1_ex_clear(pval, it);
-		else *pval = NULL;
-		break;
-
-
-		case ASN1_ITYPE_PRIMITIVE:
-		if (it->templates) 
-			asn1_template_clear(pval, it->templates);
-		else
-			asn1_primitive_clear(pval, it);
-		break;
-
-		case ASN1_ITYPE_MSTRING:
-		asn1_primitive_clear(pval, it);
-		break;
-
-		case ASN1_ITYPE_COMPAT:
-		case ASN1_ITYPE_CHOICE:
-		case ASN1_ITYPE_SEQUENCE:
-		case ASN1_ITYPE_NDEF_SEQUENCE:
-		*pval = NULL;
-		break;
-		}
-	}
-
-
-int ASN1_template_new(ASN1_VALUE **pval, const ASN1_TEMPLATE *tt)
-	{
-	const ASN1_ITEM *it = ASN1_ITEM_ptr(tt->item);
-	int ret;
-	if (tt->flags & ASN1_TFLG_OPTIONAL)
-		{
-		asn1_template_clear(pval, tt);
-		return 1;
-		}
-	/* If ANY DEFINED BY nothing to do */
-
-	if (tt->flags & ASN1_TFLG_ADB_MASK)
-		{
-		*pval = NULL;
-		return 1;
-		}
-#ifdef CRYPTO_MDEBUG
-	if (tt->field_name)
-		CRYPTO_push_info(tt->field_name);
-#endif
-	/* If SET OF or SEQUENCE OF, its a STACK */
-	if (tt->flags & ASN1_TFLG_SK_MASK)
-		{
-		STACK_OF(ASN1_VALUE) *skval;
-		skval = sk_ASN1_VALUE_new_null();
-		if (!skval)
-			{
-			ASN1err(ASN1_F_ASN1_TEMPLATE_NEW, ERR_R_MALLOC_FAILURE);
-			ret = 0;
-			goto done;
-			}
-		*pval = (ASN1_VALUE *)skval;
-		ret = 1;
-		goto done;
-		}
-	/* Otherwise pass it back to the item routine */
-	ret = asn1_item_ex_combine_new(pval, it, tt->flags & ASN1_TFLG_COMBINE);
-	done:
-#ifdef CRYPTO_MDEBUG
-	if (it->sname)
-		CRYPTO_pop_info();
-#endif
-	return ret;
-	}
-
-static void asn1_template_clear(ASN1_VALUE **pval, const ASN1_TEMPLATE *tt)
-	{
-	/* If ADB or STACK just NULL the field */
-	if (tt->flags & (ASN1_TFLG_ADB_MASK|ASN1_TFLG_SK_MASK)) 
-		*pval = NULL;
-	else
-		asn1_item_clear(pval, ASN1_ITEM_ptr(tt->item));
-	}
-
-
-/* NB: could probably combine most of the real XXX_new() behaviour and junk
- * all the old functions.
- */
-
-int ASN1_primitive_new(ASN1_VALUE **pval, const ASN1_ITEM *it)
-	{
-	ASN1_TYPE *typ;
-	int utype;
-
-	if (it && it->funcs)
-		{
-		const ASN1_PRIMITIVE_FUNCS *pf = it->funcs;
-		if (pf->prim_new)
-			return pf->prim_new(pval, it);
-		}
-
-	if (!it || (it->itype == ASN1_ITYPE_MSTRING))
-		utype = -1;
-	else
-		utype = it->utype;
-	switch(utype)
-		{
-		case V_ASN1_OBJECT:
-		*pval = (ASN1_VALUE *)OBJ_nid2obj(NID_undef);
-		return 1;
-
-		case V_ASN1_BOOLEAN:
-		if (it)
-			*(ASN1_BOOLEAN *)pval = it->size;
-		else
-			*(ASN1_BOOLEAN *)pval = -1;
-		return 1;
-
-		case V_ASN1_NULL:
-		*pval = (ASN1_VALUE *)1;
-		return 1;
-
-		case V_ASN1_ANY:
-		typ = OPENSSL_malloc(sizeof(ASN1_TYPE));
-		if (!typ)
-			return 0;
-		typ->value.ptr = NULL;
-		typ->type = -1;
-		*pval = (ASN1_VALUE *)typ;
-		break;
-
-		default:
-		*pval = (ASN1_VALUE *)ASN1_STRING_type_new(utype);
-		break;
-		}
-	if (*pval)
-		return 1;
-	return 0;
-	}
-
-void asn1_primitive_clear(ASN1_VALUE **pval, const ASN1_ITEM *it)
-	{
-	int utype;
-	if (it && it->funcs)
-		{
-		const ASN1_PRIMITIVE_FUNCS *pf = it->funcs;
-		if (pf->prim_clear)
-			pf->prim_clear(pval, it);
-		else 
-			*pval = NULL;
-		return;
-		}
-	if (!it || (it->itype == ASN1_ITYPE_MSTRING))
-		utype = -1;
-	else
-		utype = it->utype;
-	if (utype == V_ASN1_BOOLEAN)
-		*(ASN1_BOOLEAN *)pval = it->size;
-	else *pval = NULL;
-	}
diff --git a/crypto/openssl/crypto/asn1/tasn_prn.c b/crypto/openssl/crypto/asn1/tasn_prn.c
deleted file mode 100644
index 719639b511fc..000000000000
--- a/crypto/openssl/crypto/asn1/tasn_prn.c
+++ /dev/null
@@ -1,198 +0,0 @@
-/* tasn_prn.c */
-/* Written by Dr Stephen N Henson (shenson@bigfoot.com) for the OpenSSL
- * project 2000.
- */
-/* ====================================================================
- * Copyright (c) 2000 The OpenSSL Project.  All rights reserved.
- *
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions
- * are met:
- *
- * 1. Redistributions of source code must retain the above copyright
- *    notice, this list of conditions and the following disclaimer. 
- *
- * 2. Redistributions in binary form must reproduce the above copyright
- *    notice, this list of conditions and the following disclaimer in
- *    the documentation and/or other materials provided with the
- *    distribution.
- *
- * 3. All advertising materials mentioning features or use of this
- *    software must display the following acknowledgment:
- *    "This product includes software developed by the OpenSSL Project
- *    for use in the OpenSSL Toolkit. (http://www.OpenSSL.org/)"
- *
- * 4. The names "OpenSSL Toolkit" and "OpenSSL Project" must not be used to
- *    endorse or promote products derived from this software without
- *    prior written permission. For written permission, please contact
- *    licensing@OpenSSL.org.
- *
- * 5. Products derived from this software may not be called "OpenSSL"
- *    nor may "OpenSSL" appear in their names without prior written
- *    permission of the OpenSSL Project.
- *
- * 6. Redistributions of any form whatsoever must retain the following
- *    acknowledgment:
- *    "This product includes software developed by the OpenSSL Project
- *    for use in the OpenSSL Toolkit (http://www.OpenSSL.org/)"
- *
- * THIS SOFTWARE IS PROVIDED BY THE OpenSSL PROJECT ``AS IS'' AND ANY
- * EXPRESSED OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
- * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR
- * PURPOSE ARE DISCLAIMED.  IN NO EVENT SHALL THE OpenSSL PROJECT OR
- * ITS CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
- * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
- * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
- * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
- * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
- * STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
- * ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED
- * OF THE POSSIBILITY OF SUCH DAMAGE.
- * ====================================================================
- *
- * This product includes cryptographic software written by Eric Young
- * (eay@cryptsoft.com).  This product includes software written by Tim
- * Hudson (tjh@cryptsoft.com).
- *
- */
-
-
-#include <stddef.h>
-#include <openssl/asn1.h>
-#include <openssl/objects.h>
-#include <openssl/buffer.h>
-#include <openssl/err.h>
-#include <openssl/nasn.h>
-
-/* Print routines. Print out a whole structure from a template.
- */
-
-static int asn1_item_print_nm(BIO *out, void *fld, int indent, const ASN1_ITEM *it, const char *name);
-
-int ASN1_item_print(BIO *out, void *fld, int indent, const ASN1_ITEM *it)
-{
-	return asn1_item_print_nm(out, fld, indent, it, it->sname);
-}
-
-static int asn1_item_print_nm(BIO *out, void *fld, int indent, const ASN1_ITEM *it, const char *name)
-{
-	ASN1_STRING *str;
-	const ASN1_TEMPLATE *tt;
-	void *tmpfld;
-	int i;
-	if(!fld) {
-		BIO_printf(out, "%*s%s ABSENT\n", indent, "", name);
-		return 1;
-	}
-	switch(it->itype) {
-
-		case ASN1_ITYPE_PRIMITIVE:
-		if(it->templates)
-			return ASN1_template_print(out, fld, indent, it->templates);
-		return asn1_primitive_print(out, fld, it->utype, indent, name);
-		break;
-
-		case ASN1_ITYPE_MSTRING:
-		str = fld;
-		return asn1_primitive_print(out, fld, str->type, indent, name);
-
-		case ASN1_ITYPE_EXTERN:
-		BIO_printf(out, "%*s%s:EXTERNAL TYPE %s %s\n", indent, "", name, it->sname, fld ? "" : "ABSENT");
-		return 1;
-		case ASN1_ITYPE_COMPAT:
-		BIO_printf(out, "%*s%s:COMPATIBLE TYPE %s %s\n", indent, "", name, it->sname, fld ? "" : "ABSENT");
-		return 1;
-
-
-		case ASN1_ITYPE_CHOICE:
-		/* CHOICE type, get selector */
-		i = asn1_get_choice_selector(fld, it);
-		/* This should never happen... */
-		if((i < 0) || (i >= it->tcount)) {
-			BIO_printf(out, "%s selector [%d] out of range\n", it->sname, i);
-			return 1;
-		}
-		tt = it->templates + i;
-		tmpfld = asn1_get_field(fld, tt);
-		return ASN1_template_print(out, tmpfld, indent, tt);
-
-		case ASN1_ITYPE_SEQUENCE:
-		BIO_printf(out, "%*s%s {\n", indent, "", name);
-		/* Get each field entry */
-		for(i = 0, tt = it->templates; i < it->tcount; i++, tt++) {
-			tmpfld = asn1_get_field(fld, tt);
-			ASN1_template_print(out, tmpfld, indent + 2, tt);
-		}
-		BIO_printf(out, "%*s}\n", indent, "");
-		return 1;
-
-		default:
-		return 0;
-	}
-}
-
-int ASN1_template_print(BIO *out, void *fld, int indent, const ASN1_TEMPLATE *tt)
-{
-	int i, flags;
-#if 0
-	if(!fld) return 0; 
-#endif
-	flags = tt->flags;
-	if(flags & ASN1_TFLG_SK_MASK) {
-		char *tname;
-		void *skitem;
-		/* SET OF, SEQUENCE OF */
-		if(flags & ASN1_TFLG_SET_OF) tname = "SET";
-		else tname = "SEQUENCE";
-		if(fld) {
-			BIO_printf(out, "%*s%s OF %s {\n", indent, "", tname, tt->field_name);
-			for(i = 0; i < sk_num(fld); i++) {
-				skitem = sk_value(fld, i);
-				asn1_item_print_nm(out, skitem, indent + 2, tt->item, "");
-			}
-			BIO_printf(out, "%*s}\n", indent, "");
-		} else 
-			BIO_printf(out, "%*s%s OF %s ABSENT\n", indent, "", tname, tt->field_name);
-		return 1;
-	}
-	return asn1_item_print_nm(out, fld, indent, tt->item, tt->field_name);
-}
-
-static int asn1_primitive_print(BIO *out, void *fld, long utype, int indent, const char *name)
-{
-	ASN1_STRING *str = fld;
-	if(fld) {
-		if(utype == V_ASN1_BOOLEAN) {
-			int *bool = fld;
-if(*bool == -1) printf("BOOL MISSING\n");
-			BIO_printf(out, "%*s%s:%s", indent, "", "BOOLEAN", *bool ? "TRUE" : "FALSE");
-		} else if((utype == V_ASN1_INTEGER) 
-			  || (utype == V_ASN1_ENUMERATED)) {
-			char *s, *nm;
-			s = i2s_ASN1_INTEGER(NULL, fld);
-			if(utype == V_ASN1_INTEGER) nm = "INTEGER";
-			else nm = "ENUMERATED";
-			BIO_printf(out, "%*s%s:%s", indent, "", nm, s);
-			OPENSSL_free(s);
-		} else if(utype == V_ASN1_NULL) {
-			BIO_printf(out, "%*s%s", indent, "", "NULL");
-		} else if(utype == V_ASN1_UTCTIME) {
-			BIO_printf(out, "%*s%s:%s:", indent, "", name, "UTCTIME");
-			ASN1_UTCTIME_print(out, str);
-		} else if(utype == V_ASN1_GENERALIZEDTIME) {
-			BIO_printf(out, "%*s%s:%s:", indent, "", name, "GENERALIZEDTIME");
-			ASN1_GENERALIZEDTIME_print(out, str);
-		} else if(utype == V_ASN1_OBJECT) {
-			char objbuf[80], *ln;
-			ln = OBJ_nid2ln(OBJ_obj2nid(fld));
-			if(!ln) ln = "";
-			OBJ_obj2txt(objbuf, sizeof objbuf, fld, 1);
-			BIO_printf(out, "%*s%s:%s (%s)", indent, "", "OBJECT", ln, objbuf);
-		} else {
-			BIO_printf(out, "%*s%s:", indent, "", name);
-			ASN1_STRING_print_ex(out, str, ASN1_STRFLGS_DUMP_UNKNOWN|ASN1_STRFLGS_SHOW_TYPE);
-		}
-		BIO_printf(out, "\n");
-	} else BIO_printf(out, "%*s%s [ABSENT]\n", indent, "", name);
-	return 1;
-}
diff --git a/crypto/openssl/crypto/asn1/tasn_typ.c b/crypto/openssl/crypto/asn1/tasn_typ.c
deleted file mode 100644
index 6f17f1bec716..000000000000
--- a/crypto/openssl/crypto/asn1/tasn_typ.c
+++ /dev/null
@@ -1,137 +0,0 @@
-/* tasn_typ.c */
-/* Written by Dr Stephen N Henson (shenson@bigfoot.com) for the OpenSSL
- * project 2000.
- */
-/* ====================================================================
- * Copyright (c) 2000 The OpenSSL Project.  All rights reserved.
- *
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions
- * are met:
- *
- * 1. Redistributions of source code must retain the above copyright
- *    notice, this list of conditions and the following disclaimer. 
- *
- * 2. Redistributions in binary form must reproduce the above copyright
- *    notice, this list of conditions and the following disclaimer in
- *    the documentation and/or other materials provided with the
- *    distribution.
- *
- * 3. All advertising materials mentioning features or use of this
- *    software must display the following acknowledgment:
- *    "This product includes software developed by the OpenSSL Project
- *    for use in the OpenSSL Toolkit. (http://www.OpenSSL.org/)"
- *
- * 4. The names "OpenSSL Toolkit" and "OpenSSL Project" must not be used to
- *    endorse or promote products derived from this software without
- *    prior written permission. For written permission, please contact
- *    licensing@OpenSSL.org.
- *
- * 5. Products derived from this software may not be called "OpenSSL"
- *    nor may "OpenSSL" appear in their names without prior written
- *    permission of the OpenSSL Project.
- *
- * 6. Redistributions of any form whatsoever must retain the following
- *    acknowledgment:
- *    "This product includes software developed by the OpenSSL Project
- *    for use in the OpenSSL Toolkit (http://www.OpenSSL.org/)"
- *
- * THIS SOFTWARE IS PROVIDED BY THE OpenSSL PROJECT ``AS IS'' AND ANY
- * EXPRESSED OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
- * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR
- * PURPOSE ARE DISCLAIMED.  IN NO EVENT SHALL THE OpenSSL PROJECT OR
- * ITS CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
- * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
- * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
- * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
- * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
- * STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
- * ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED
- * OF THE POSSIBILITY OF SUCH DAMAGE.
- * ====================================================================
- *
- * This product includes cryptographic software written by Eric Young
- * (eay@cryptsoft.com).  This product includes software written by Tim
- * Hudson (tjh@cryptsoft.com).
- *
- */
-#include <stdio.h>
-#include <openssl/asn1.h>
-#include <openssl/asn1t.h>
-
-/* Declarations for string types */
-
-
-IMPLEMENT_ASN1_TYPE(ASN1_INTEGER)
-IMPLEMENT_ASN1_FUNCTIONS(ASN1_INTEGER)
-
-IMPLEMENT_ASN1_TYPE(ASN1_ENUMERATED)
-IMPLEMENT_ASN1_FUNCTIONS(ASN1_ENUMERATED)
-
-IMPLEMENT_ASN1_TYPE(ASN1_BIT_STRING)
-IMPLEMENT_ASN1_FUNCTIONS(ASN1_BIT_STRING)
-
-IMPLEMENT_ASN1_TYPE(ASN1_OCTET_STRING)
-IMPLEMENT_ASN1_FUNCTIONS(ASN1_OCTET_STRING)
-
-IMPLEMENT_ASN1_TYPE(ASN1_NULL)
-IMPLEMENT_ASN1_FUNCTIONS(ASN1_NULL)
-
-IMPLEMENT_ASN1_TYPE(ASN1_OBJECT)
-
-IMPLEMENT_ASN1_TYPE(ASN1_UTF8STRING)
-IMPLEMENT_ASN1_FUNCTIONS(ASN1_UTF8STRING)
-
-IMPLEMENT_ASN1_TYPE(ASN1_PRINTABLESTRING)
-IMPLEMENT_ASN1_FUNCTIONS(ASN1_PRINTABLESTRING)
-
-IMPLEMENT_ASN1_TYPE(ASN1_T61STRING)
-IMPLEMENT_ASN1_FUNCTIONS(ASN1_T61STRING)
-
-IMPLEMENT_ASN1_TYPE(ASN1_IA5STRING)
-IMPLEMENT_ASN1_FUNCTIONS(ASN1_IA5STRING)
-
-IMPLEMENT_ASN1_TYPE(ASN1_GENERALSTRING)
-IMPLEMENT_ASN1_FUNCTIONS(ASN1_GENERALSTRING)
-
-IMPLEMENT_ASN1_TYPE(ASN1_UTCTIME)
-IMPLEMENT_ASN1_FUNCTIONS(ASN1_UTCTIME)
-
-IMPLEMENT_ASN1_TYPE(ASN1_GENERALIZEDTIME)
-IMPLEMENT_ASN1_FUNCTIONS(ASN1_GENERALIZEDTIME)
-
-IMPLEMENT_ASN1_TYPE(ASN1_VISIBLESTRING)
-IMPLEMENT_ASN1_FUNCTIONS(ASN1_VISIBLESTRING)
-
-IMPLEMENT_ASN1_TYPE(ASN1_UNIVERSALSTRING)
-IMPLEMENT_ASN1_FUNCTIONS(ASN1_UNIVERSALSTRING)
-
-IMPLEMENT_ASN1_TYPE(ASN1_BMPSTRING)
-IMPLEMENT_ASN1_FUNCTIONS(ASN1_BMPSTRING)
-
-IMPLEMENT_ASN1_TYPE(ASN1_ANY)
-
-/* Just swallow an ASN1_SEQUENCE in an ASN1_STRING */
-IMPLEMENT_ASN1_TYPE(ASN1_SEQUENCE)
-
-IMPLEMENT_ASN1_FUNCTIONS_fname(ASN1_TYPE, ASN1_ANY, ASN1_TYPE)
-
-/* Multistring types */
-
-IMPLEMENT_ASN1_MSTRING(ASN1_PRINTABLE, B_ASN1_PRINTABLE)
-IMPLEMENT_ASN1_FUNCTIONS_name(ASN1_STRING, ASN1_PRINTABLE)
-
-IMPLEMENT_ASN1_MSTRING(DISPLAYTEXT, B_ASN1_DISPLAYTEXT)
-IMPLEMENT_ASN1_FUNCTIONS_name(ASN1_STRING, DISPLAYTEXT)
-
-IMPLEMENT_ASN1_MSTRING(DIRECTORYSTRING, B_ASN1_DIRECTORYSTRING)
-IMPLEMENT_ASN1_FUNCTIONS_name(ASN1_STRING, DIRECTORYSTRING)
-
-/* Three separate BOOLEAN type: normal, DEFAULT TRUE and DEFAULT FALSE */
-IMPLEMENT_ASN1_TYPE_ex(ASN1_BOOLEAN, ASN1_BOOLEAN, -1)
-IMPLEMENT_ASN1_TYPE_ex(ASN1_TBOOLEAN, ASN1_BOOLEAN, 1)
-IMPLEMENT_ASN1_TYPE_ex(ASN1_FBOOLEAN, ASN1_BOOLEAN, 0)
-
-/* Special, OCTET STRING with indefinite length constructed support */
-
-IMPLEMENT_ASN1_TYPE_ex(ASN1_OCTET_STRING_NDEF, ASN1_OCTET_STRING, ASN1_TFLG_NDEF)
diff --git a/crypto/openssl/crypto/asn1/tasn_utl.c b/crypto/openssl/crypto/asn1/tasn_utl.c
deleted file mode 100644
index 34d520b180aa..000000000000
--- a/crypto/openssl/crypto/asn1/tasn_utl.c
+++ /dev/null
@@ -1,279 +0,0 @@
-/* tasn_utl.c */
-/* Written by Dr Stephen N Henson (shenson@bigfoot.com) for the OpenSSL
- * project 2000.
- */
-/* ====================================================================
- * Copyright (c) 2000-2004 The OpenSSL Project.  All rights reserved.
- *
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions
- * are met:
- *
- * 1. Redistributions of source code must retain the above copyright
- *    notice, this list of conditions and the following disclaimer. 
- *
- * 2. Redistributions in binary form must reproduce the above copyright
- *    notice, this list of conditions and the following disclaimer in
- *    the documentation and/or other materials provided with the
- *    distribution.
- *
- * 3. All advertising materials mentioning features or use of this
- *    software must display the following acknowledgment:
- *    "This product includes software developed by the OpenSSL Project
- *    for use in the OpenSSL Toolkit. (http://www.OpenSSL.org/)"
- *
- * 4. The names "OpenSSL Toolkit" and "OpenSSL Project" must not be used to
- *    endorse or promote products derived from this software without
- *    prior written permission. For written permission, please contact
- *    licensing@OpenSSL.org.
- *
- * 5. Products derived from this software may not be called "OpenSSL"
- *    nor may "OpenSSL" appear in their names without prior written
- *    permission of the OpenSSL Project.
- *
- * 6. Redistributions of any form whatsoever must retain the following
- *    acknowledgment:
- *    "This product includes software developed by the OpenSSL Project
- *    for use in the OpenSSL Toolkit (http://www.OpenSSL.org/)"
- *
- * THIS SOFTWARE IS PROVIDED BY THE OpenSSL PROJECT ``AS IS'' AND ANY
- * EXPRESSED OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
- * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR
- * PURPOSE ARE DISCLAIMED.  IN NO EVENT SHALL THE OpenSSL PROJECT OR
- * ITS CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
- * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
- * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
- * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
- * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
- * STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
- * ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED
- * OF THE POSSIBILITY OF SUCH DAMAGE.
- * ====================================================================
- *
- * This product includes cryptographic software written by Eric Young
- * (eay@cryptsoft.com).  This product includes software written by Tim
- * Hudson (tjh@cryptsoft.com).
- *
- */
-
-
-#include <stddef.h>
-#include <string.h>
-#include <openssl/asn1.h>
-#include <openssl/asn1t.h>
-#include <openssl/objects.h>
-#include <openssl/err.h>
-
-/* Utility functions for manipulating fields and offsets */
-
-/* Add 'offset' to 'addr' */
-#define offset2ptr(addr, offset) (void *)(((char *) addr) + offset)
-
-/* Given an ASN1_ITEM CHOICE type return
- * the selector value
- */
-
-int asn1_get_choice_selector(ASN1_VALUE **pval, const ASN1_ITEM *it)
-	{
-	int *sel = offset2ptr(*pval, it->utype);
-	return *sel;
-	}
-
-/* Given an ASN1_ITEM CHOICE type set
- * the selector value, return old value.
- */
-
-int asn1_set_choice_selector(ASN1_VALUE **pval, int value, const ASN1_ITEM *it)
-	{	
-	int *sel, ret;
-	sel = offset2ptr(*pval, it->utype);
-	ret = *sel;
-	*sel = value;
-	return ret;
-	}
-
-/* Do reference counting. The value 'op' decides what to do. 
- * if it is +1 then the count is incremented. If op is 0 count is
- * set to 1. If op is -1 count is decremented and the return value
- * is the current refrence count or 0 if no reference count exists.
- */
-
-int asn1_do_lock(ASN1_VALUE **pval, int op, const ASN1_ITEM *it)
-	{
-	const ASN1_AUX *aux;
-	int *lck, ret;
-	if ((it->itype != ASN1_ITYPE_SEQUENCE)
-	   && (it->itype != ASN1_ITYPE_NDEF_SEQUENCE))
-		return 0;
-	aux = it->funcs;
-	if (!aux || !(aux->flags & ASN1_AFLG_REFCOUNT))
-		return 0;
-	lck = offset2ptr(*pval, aux->ref_offset);
-	if (op == 0)
-		{
-		*lck = 1;
-		return 1;
-		}
-	ret = CRYPTO_add(lck, op, aux->ref_lock);
-#ifdef REF_PRINT
-	fprintf(stderr, "%s: Reference Count: %d\n", it->sname, *lck);
-#endif
-#ifdef REF_CHECK
-	if (ret < 0) 
-		fprintf(stderr, "%s, bad reference count\n", it->sname);
-#endif
-	return ret;
-	}
-
-static ASN1_ENCODING *asn1_get_enc_ptr(ASN1_VALUE **pval, const ASN1_ITEM *it)
-	{
-	const ASN1_AUX *aux;
-	if (!pval || !*pval)
-		return NULL;
-	aux = it->funcs;
-	if (!aux || !(aux->flags & ASN1_AFLG_ENCODING))
-		return NULL;
-	return offset2ptr(*pval, aux->enc_offset);
-	}
-
-void asn1_enc_init(ASN1_VALUE **pval, const ASN1_ITEM *it)
-	{
-	ASN1_ENCODING *enc;
-	enc = asn1_get_enc_ptr(pval, it);
-	if (enc)
-		{
-		enc->enc = NULL;
-		enc->len = 0;
-		enc->modified = 1;
-		}
-	}
-
-void asn1_enc_free(ASN1_VALUE **pval, const ASN1_ITEM *it)
-	{
-	ASN1_ENCODING *enc;
-	enc = asn1_get_enc_ptr(pval, it);
-	if (enc)
-		{
-		if (enc->enc)
-			OPENSSL_free(enc->enc);
-		enc->enc = NULL;
-		enc->len = 0;
-		enc->modified = 1;
-		}
-	}
-
-int asn1_enc_save(ASN1_VALUE **pval, const unsigned char *in, int inlen,
-							 const ASN1_ITEM *it)
-	{
-	ASN1_ENCODING *enc;
-	enc = asn1_get_enc_ptr(pval, it);
-	if (!enc)
-		return 1;
-
-	if (enc->enc)
-		OPENSSL_free(enc->enc);
-	enc->enc = OPENSSL_malloc(inlen);
-	if (!enc->enc)
-		return 0;
-	memcpy(enc->enc, in, inlen);
-	enc->len = inlen;
-	enc->modified = 0;
-
-	return 1;
-	}
-		
-int asn1_enc_restore(int *len, unsigned char **out, ASN1_VALUE **pval,
-							const ASN1_ITEM *it)
-	{
-	ASN1_ENCODING *enc;
-	enc = asn1_get_enc_ptr(pval, it);
-	if (!enc || enc->modified)
-		return 0;
-	if (out)
-		{
-		memcpy(*out, enc->enc, enc->len);
-		*out += enc->len;
-		}
-	if (len)
-		*len = enc->len;
-	return 1;
-	}
-
-/* Given an ASN1_TEMPLATE get a pointer to a field */
-ASN1_VALUE ** asn1_get_field_ptr(ASN1_VALUE **pval, const ASN1_TEMPLATE *tt)
-	{
-	ASN1_VALUE **pvaltmp;
-	if (tt->flags & ASN1_TFLG_COMBINE)
-		return pval;
-	pvaltmp = offset2ptr(*pval, tt->offset);
-	/* NOTE for BOOLEAN types the field is just a plain
- 	 * int so we can't return int **, so settle for
-	 * (int *).
-	 */
-	return pvaltmp;
-	}
-
-/* Handle ANY DEFINED BY template, find the selector, look up
- * the relevant ASN1_TEMPLATE in the table and return it.
- */
-
-const ASN1_TEMPLATE *asn1_do_adb(ASN1_VALUE **pval, const ASN1_TEMPLATE *tt,
-								int nullerr)
-	{
-	const ASN1_ADB *adb;
-	const ASN1_ADB_TABLE *atbl;
-	long selector;
-	ASN1_VALUE **sfld;
-	int i;
-	if (!(tt->flags & ASN1_TFLG_ADB_MASK))
-		return tt;
-
-	/* Else ANY DEFINED BY ... get the table */
-	adb = ASN1_ADB_ptr(tt->item);
-
-	/* Get the selector field */
-	sfld = offset2ptr(*pval, adb->offset);
-
-	/* Check if NULL */
-	if (!sfld)
-		{
-		if (!adb->null_tt)
-			goto err;
-		return adb->null_tt;
-		}
-
-	/* Convert type to a long:
-	 * NB: don't check for NID_undef here because it
-	 * might be a legitimate value in the table
-	 */
-	if (tt->flags & ASN1_TFLG_ADB_OID) 
-		selector = OBJ_obj2nid((ASN1_OBJECT *)*sfld);
-	else 
-		selector = ASN1_INTEGER_get((ASN1_INTEGER *)*sfld);
-
-	/* Try to find matching entry in table
-	 * Maybe should check application types first to
-	 * allow application override? Might also be useful
-	 * to have a flag which indicates table is sorted and
-	 * we can do a binary search. For now stick to a
-	 * linear search.
-	 */
-
-	for (atbl = adb->tbl, i = 0; i < adb->tblcount; i++, atbl++)
-		if (atbl->value == selector)
-			return &atbl->tt;
-
-	/* FIXME: need to search application table too */
-
-	/* No match, return default type */
-	if (!adb->default_tt)
-		goto err;		
-	return adb->default_tt;
-	
-	err:
-	/* FIXME: should log the value or OID of unsupported type */
-	if (nullerr)
-		ASN1err(ASN1_F_ASN1_DO_ADB,
-			ASN1_R_UNSUPPORTED_ANY_DEFINED_BY_TYPE);
-	return NULL;
-	}
diff --git a/crypto/openssl/crypto/asn1/x_algor.c b/crypto/openssl/crypto/asn1/x_algor.c
deleted file mode 100644
index 00b9ea54a15f..000000000000
--- a/crypto/openssl/crypto/asn1/x_algor.c
+++ /dev/null
@@ -1,73 +0,0 @@
-/* x_algor.c */
-/* Written by Dr Stephen N Henson (shenson@bigfoot.com) for the OpenSSL
- * project 2000.
- */
-/* ====================================================================
- * Copyright (c) 2000 The OpenSSL Project.  All rights reserved.
- *
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions
- * are met:
- *
- * 1. Redistributions of source code must retain the above copyright
- *    notice, this list of conditions and the following disclaimer. 
- *
- * 2. Redistributions in binary form must reproduce the above copyright
- *    notice, this list of conditions and the following disclaimer in
- *    the documentation and/or other materials provided with the
- *    distribution.
- *
- * 3. All advertising materials mentioning features or use of this
- *    software must display the following acknowledgment:
- *    "This product includes software developed by the OpenSSL Project
- *    for use in the OpenSSL Toolkit. (http://www.OpenSSL.org/)"
- *
- * 4. The names "OpenSSL Toolkit" and "OpenSSL Project" must not be used to
- *    endorse or promote products derived from this software without
- *    prior written permission. For written permission, please contact
- *    licensing@OpenSSL.org.
- *
- * 5. Products derived from this software may not be called "OpenSSL"
- *    nor may "OpenSSL" appear in their names without prior written
- *    permission of the OpenSSL Project.
- *
- * 6. Redistributions of any form whatsoever must retain the following
- *    acknowledgment:
- *    "This product includes software developed by the OpenSSL Project
- *    for use in the OpenSSL Toolkit (http://www.OpenSSL.org/)"
- *
- * THIS SOFTWARE IS PROVIDED BY THE OpenSSL PROJECT ``AS IS'' AND ANY
- * EXPRESSED OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
- * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR
- * PURPOSE ARE DISCLAIMED.  IN NO EVENT SHALL THE OpenSSL PROJECT OR
- * ITS CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
- * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
- * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
- * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
- * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
- * STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
- * ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED
- * OF THE POSSIBILITY OF SUCH DAMAGE.
- * ====================================================================
- *
- * This product includes cryptographic software written by Eric Young
- * (eay@cryptsoft.com).  This product includes software written by Tim
- * Hudson (tjh@cryptsoft.com).
- *
- */
-
-#include <stddef.h>
-#include <openssl/x509.h>
-#include <openssl/asn1.h>
-#include <openssl/asn1t.h>
-
-ASN1_SEQUENCE(X509_ALGOR) = {
-	ASN1_SIMPLE(X509_ALGOR, algorithm, ASN1_OBJECT),
-	ASN1_OPT(X509_ALGOR, parameter, ASN1_ANY)
-} ASN1_SEQUENCE_END(X509_ALGOR)
-
-IMPLEMENT_ASN1_FUNCTIONS(X509_ALGOR)
-IMPLEMENT_ASN1_DUP_FUNCTION(X509_ALGOR)
-
-IMPLEMENT_STACK_OF(X509_ALGOR)
-IMPLEMENT_ASN1_SET_OF(X509_ALGOR)
diff --git a/crypto/openssl/crypto/asn1/x_attrib.c b/crypto/openssl/crypto/asn1/x_attrib.c
deleted file mode 100644
index 1e3713f18f26..000000000000
--- a/crypto/openssl/crypto/asn1/x_attrib.c
+++ /dev/null
@@ -1,118 +0,0 @@
-/* crypto/asn1/x_attrib.c */
-/* Copyright (C) 1995-1998 Eric Young (eay@cryptsoft.com)
- * All rights reserved.
- *
- * This package is an SSL implementation written
- * by Eric Young (eay@cryptsoft.com).
- * The implementation was written so as to conform with Netscapes SSL.
- * 
- * This library is free for commercial and non-commercial use as long as
- * the following conditions are aheared to.  The following conditions
- * apply to all code found in this distribution, be it the RC4, RSA,
- * lhash, DES, etc., code; not just the SSL code.  The SSL documentation
- * included with this distribution is covered by the same copyright terms
- * except that the holder is Tim Hudson (tjh@cryptsoft.com).
- * 
- * Copyright remains Eric Young's, and as such any Copyright notices in
- * the code are not to be removed.
- * If this package is used in a product, Eric Young should be given attribution
- * as the author of the parts of the library used.
- * This can be in the form of a textual message at program startup or
- * in documentation (online or textual) provided with the package.
- * 
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions
- * are met:
- * 1. Redistributions of source code must retain the copyright
- *    notice, this list of conditions and the following disclaimer.
- * 2. Redistributions in binary form must reproduce the above copyright
- *    notice, this list of conditions and the following disclaimer in the
- *    documentation and/or other materials provided with the distribution.
- * 3. All advertising materials mentioning features or use of this software
- *    must display the following acknowledgement:
- *    "This product includes cryptographic software written by
- *     Eric Young (eay@cryptsoft.com)"
- *    The word 'cryptographic' can be left out if the rouines from the library
- *    being used are not cryptographic related :-).
- * 4. If you include any Windows specific code (or a derivative thereof) from 
- *    the apps directory (application code) you must include an acknowledgement:
- *    "This product includes software written by Tim Hudson (tjh@cryptsoft.com)"
- * 
- * THIS SOFTWARE IS PROVIDED BY ERIC YOUNG ``AS IS'' AND
- * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
- * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
- * ARE DISCLAIMED.  IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE
- * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
- * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
- * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
- * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
- * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
- * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
- * SUCH DAMAGE.
- * 
- * The licence and distribution terms for any publically available version or
- * derivative of this code cannot be changed.  i.e. this code cannot simply be
- * copied and put under another distribution licence
- * [including the GNU Public Licence.]
- */
-
-#include <stdio.h>
-#include "cryptlib.h"
-#include <openssl/objects.h>
-#include <openssl/asn1t.h>
-#include <openssl/x509.h>
-
-/* X509_ATTRIBUTE: this has the following form:
- *
- * typedef struct x509_attributes_st
- *	{
- *	ASN1_OBJECT *object;
- *	int single;
- *	union	{
- *		char		*ptr;
- * 		STACK_OF(ASN1_TYPE) *set;
- * 		ASN1_TYPE	*single;
- *		} value;
- *	} X509_ATTRIBUTE;
- *
- * this needs some extra thought because the CHOICE type is
- * merged with the main structure and because the value can
- * be anything at all we *must* try the SET OF first because
- * the ASN1_ANY type will swallow anything including the whole
- * SET OF structure.
- */
-
-ASN1_CHOICE(X509_ATTRIBUTE_SET) = {
-	ASN1_SET_OF(X509_ATTRIBUTE, value.set, ASN1_ANY),
-	ASN1_SIMPLE(X509_ATTRIBUTE, value.single, ASN1_ANY)
-} ASN1_CHOICE_END_selector(X509_ATTRIBUTE, X509_ATTRIBUTE_SET, single)
-
-ASN1_SEQUENCE(X509_ATTRIBUTE) = {
-	ASN1_SIMPLE(X509_ATTRIBUTE, object, ASN1_OBJECT),
-	/* CHOICE type merged with parent */
-	ASN1_EX_COMBINE(0, 0, X509_ATTRIBUTE_SET)
-} ASN1_SEQUENCE_END(X509_ATTRIBUTE)
-
-IMPLEMENT_ASN1_FUNCTIONS(X509_ATTRIBUTE)
-IMPLEMENT_ASN1_DUP_FUNCTION(X509_ATTRIBUTE)
-
-X509_ATTRIBUTE *X509_ATTRIBUTE_create(int nid, int atrtype, void *value)
-	{
-	X509_ATTRIBUTE *ret=NULL;
-	ASN1_TYPE *val=NULL;
-
-	if ((ret=X509_ATTRIBUTE_new()) == NULL)
-		return(NULL);
-	ret->object=OBJ_nid2obj(nid);
-	ret->single=0;
-	if ((ret->value.set=sk_ASN1_TYPE_new_null()) == NULL) goto err;
-	if ((val=ASN1_TYPE_new()) == NULL) goto err;
-	if (!sk_ASN1_TYPE_push(ret->value.set,val)) goto err;
-
-	ASN1_TYPE_set(val,atrtype,value);
-	return(ret);
-err:
-	if (ret != NULL) X509_ATTRIBUTE_free(ret);
-	if (val != NULL) ASN1_TYPE_free(val);
-	return(NULL);
-	}
diff --git a/crypto/openssl/crypto/asn1/x_bignum.c b/crypto/openssl/crypto/asn1/x_bignum.c
deleted file mode 100644
index 869c05d931de..000000000000
--- a/crypto/openssl/crypto/asn1/x_bignum.c
+++ /dev/null
@@ -1,139 +0,0 @@
-/* x_bignum.c */
-/* Written by Dr Stephen N Henson (shenson@bigfoot.com) for the OpenSSL
- * project 2000.
- */
-/* ====================================================================
- * Copyright (c) 2000 The OpenSSL Project.  All rights reserved.
- *
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions
- * are met:
- *
- * 1. Redistributions of source code must retain the above copyright
- *    notice, this list of conditions and the following disclaimer. 
- *
- * 2. Redistributions in binary form must reproduce the above copyright
- *    notice, this list of conditions and the following disclaimer in
- *    the documentation and/or other materials provided with the
- *    distribution.
- *
- * 3. All advertising materials mentioning features or use of this
- *    software must display the following acknowledgment:
- *    "This product includes software developed by the OpenSSL Project
- *    for use in the OpenSSL Toolkit. (http://www.OpenSSL.org/)"
- *
- * 4. The names "OpenSSL Toolkit" and "OpenSSL Project" must not be used to
- *    endorse or promote products derived from this software without
- *    prior written permission. For written permission, please contact
- *    licensing@OpenSSL.org.
- *
- * 5. Products derived from this software may not be called "OpenSSL"
- *    nor may "OpenSSL" appear in their names without prior written
- *    permission of the OpenSSL Project.
- *
- * 6. Redistributions of any form whatsoever must retain the following
- *    acknowledgment:
- *    "This product includes software developed by the OpenSSL Project
- *    for use in the OpenSSL Toolkit (http://www.OpenSSL.org/)"
- *
- * THIS SOFTWARE IS PROVIDED BY THE OpenSSL PROJECT ``AS IS'' AND ANY
- * EXPRESSED OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
- * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR
- * PURPOSE ARE DISCLAIMED.  IN NO EVENT SHALL THE OpenSSL PROJECT OR
- * ITS CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
- * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
- * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
- * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
- * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
- * STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
- * ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED
- * OF THE POSSIBILITY OF SUCH DAMAGE.
- * ====================================================================
- *
- * This product includes cryptographic software written by Eric Young
- * (eay@cryptsoft.com).  This product includes software written by Tim
- * Hudson (tjh@cryptsoft.com).
- *
- */
-
-#include <stdio.h>
-#include "cryptlib.h"
-#include <openssl/asn1t.h>
-#include <openssl/bn.h>
-
-/* Custom primitive type for BIGNUM handling. This reads in an ASN1_INTEGER as a
- * BIGNUM directly. Currently it ignores the sign which isn't a problem since all
- * BIGNUMs used are non negative and anything that looks negative is normally due
- * to an encoding error.
- */
-
-#define BN_SENSITIVE	1
-
-static int bn_new(ASN1_VALUE **pval, const ASN1_ITEM *it);
-static void bn_free(ASN1_VALUE **pval, const ASN1_ITEM *it);
-
-static int bn_i2c(ASN1_VALUE **pval, unsigned char *cont, int *putype, const ASN1_ITEM *it);
-static int bn_c2i(ASN1_VALUE **pval, const unsigned char *cont, int len, int utype, char *free_cont, const ASN1_ITEM *it);
-
-static ASN1_PRIMITIVE_FUNCS bignum_pf = {
-	NULL, 0,
-	bn_new,
-	bn_free,
-	0,
-	bn_c2i,
-	bn_i2c
-};
-
-ASN1_ITEM_start(BIGNUM)
-	ASN1_ITYPE_PRIMITIVE, V_ASN1_INTEGER, NULL, 0, &bignum_pf, 0, "BIGNUM"
-ASN1_ITEM_end(BIGNUM)
-
-ASN1_ITEM_start(CBIGNUM)
-	ASN1_ITYPE_PRIMITIVE, V_ASN1_INTEGER, NULL, 0, &bignum_pf, BN_SENSITIVE, "BIGNUM"
-ASN1_ITEM_end(CBIGNUM)
-
-static int bn_new(ASN1_VALUE **pval, const ASN1_ITEM *it)
-{
-	*pval = (ASN1_VALUE *)BN_new();
-	if(*pval) return 1;
-	else return 0;
-}
-
-static void bn_free(ASN1_VALUE **pval, const ASN1_ITEM *it)
-{
-	if(!*pval) return;
-	if(it->size & BN_SENSITIVE) BN_clear_free((BIGNUM *)*pval);
-	else BN_free((BIGNUM *)*pval);
-	*pval = NULL;
-}
-
-static int bn_i2c(ASN1_VALUE **pval, unsigned char *cont, int *putype, const ASN1_ITEM *it)
-{
-	BIGNUM *bn;
-	int pad;
-	if(!*pval) return -1;
-	bn = (BIGNUM *)*pval;
-	/* If MSB set in an octet we need a padding byte */
-	if(BN_num_bits(bn) & 0x7) pad = 0;
-	else pad = 1;
-	if(cont) {
-		if(pad) *cont++ = 0;
-		BN_bn2bin(bn, cont);
-	}
-	return pad + BN_num_bytes(bn);
-}
-
-static int bn_c2i(ASN1_VALUE **pval, const unsigned char *cont, int len,
-		  int utype, char *free_cont, const ASN1_ITEM *it)
-{
-	BIGNUM *bn;
-	if(!*pval) bn_new(pval, it);
-	bn  = (BIGNUM *)*pval;
-	if(!BN_bin2bn(cont, len, bn)) {
-		bn_free(pval, it);
-		return 0;
-	}
-	return 1;
-}
-
-
diff --git a/crypto/openssl/crypto/asn1/x_crl.c b/crypto/openssl/crypto/asn1/x_crl.c
deleted file mode 100644
index b99f8fc522c1..000000000000
--- a/crypto/openssl/crypto/asn1/x_crl.c
+++ /dev/null
@@ -1,140 +0,0 @@
-/* crypto/asn1/x_crl.c */
-/* Copyright (C) 1995-1998 Eric Young (eay@cryptsoft.com)
- * All rights reserved.
- *
- * This package is an SSL implementation written
- * by Eric Young (eay@cryptsoft.com).
- * The implementation was written so as to conform with Netscapes SSL.
- * 
- * This library is free for commercial and non-commercial use as long as
- * the following conditions are aheared to.  The following conditions
- * apply to all code found in this distribution, be it the RC4, RSA,
- * lhash, DES, etc., code; not just the SSL code.  The SSL documentation
- * included with this distribution is covered by the same copyright terms
- * except that the holder is Tim Hudson (tjh@cryptsoft.com).
- * 
- * Copyright remains Eric Young's, and as such any Copyright notices in
- * the code are not to be removed.
- * If this package is used in a product, Eric Young should be given attribution
- * as the author of the parts of the library used.
- * This can be in the form of a textual message at program startup or
- * in documentation (online or textual) provided with the package.
- * 
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions
- * are met:
- * 1. Redistributions of source code must retain the copyright
- *    notice, this list of conditions and the following disclaimer.
- * 2. Redistributions in binary form must reproduce the above copyright
- *    notice, this list of conditions and the following disclaimer in the
- *    documentation and/or other materials provided with the distribution.
- * 3. All advertising materials mentioning features or use of this software
- *    must display the following acknowledgement:
- *    "This product includes cryptographic software written by
- *     Eric Young (eay@cryptsoft.com)"
- *    The word 'cryptographic' can be left out if the rouines from the library
- *    being used are not cryptographic related :-).
- * 4. If you include any Windows specific code (or a derivative thereof) from 
- *    the apps directory (application code) you must include an acknowledgement:
- *    "This product includes software written by Tim Hudson (tjh@cryptsoft.com)"
- * 
- * THIS SOFTWARE IS PROVIDED BY ERIC YOUNG ``AS IS'' AND
- * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
- * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
- * ARE DISCLAIMED.  IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE
- * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
- * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
- * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
- * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
- * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
- * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
- * SUCH DAMAGE.
- * 
- * The licence and distribution terms for any publically available version or
- * derivative of this code cannot be changed.  i.e. this code cannot simply be
- * copied and put under another distribution licence
- * [including the GNU Public Licence.]
- */
-
-#include <stdio.h>
-#include "cryptlib.h"
-#include <openssl/asn1t.h>
-#include <openssl/x509.h>
-
-static int X509_REVOKED_cmp(const X509_REVOKED * const *a,
-				const X509_REVOKED * const *b);
-
-ASN1_SEQUENCE(X509_REVOKED) = {
-	ASN1_SIMPLE(X509_REVOKED,serialNumber, ASN1_INTEGER),
-	ASN1_SIMPLE(X509_REVOKED,revocationDate, ASN1_TIME),
-	ASN1_SEQUENCE_OF_OPT(X509_REVOKED,extensions, X509_EXTENSION)
-} ASN1_SEQUENCE_END(X509_REVOKED)
-
-/* The X509_CRL_INFO structure needs a bit of customisation.
- * Since we cache the original encoding the signature wont be affected by
- * reordering of the revoked field.
- */
-static int crl_inf_cb(int operation, ASN1_VALUE **pval, const ASN1_ITEM *it)
-{
-	X509_CRL_INFO *a = (X509_CRL_INFO *)*pval;
-
-	if(!a || !a->revoked) return 1;
-	switch(operation) {
-		/* Just set cmp function here. We don't sort because that
-		 * would affect the output of X509_CRL_print().
-		 */
-		case ASN1_OP_D2I_POST:
-		sk_X509_REVOKED_set_cmp_func(a->revoked,X509_REVOKED_cmp);
-		break;
-	}
-	return 1;
-}
-
-
-ASN1_SEQUENCE_enc(X509_CRL_INFO, enc, crl_inf_cb) = {
-	ASN1_OPT(X509_CRL_INFO, version, ASN1_INTEGER),
-	ASN1_SIMPLE(X509_CRL_INFO, sig_alg, X509_ALGOR),
-	ASN1_SIMPLE(X509_CRL_INFO, issuer, X509_NAME),
-	ASN1_SIMPLE(X509_CRL_INFO, lastUpdate, ASN1_TIME),
-	ASN1_OPT(X509_CRL_INFO, nextUpdate, ASN1_TIME),
-	ASN1_SEQUENCE_OF_OPT(X509_CRL_INFO, revoked, X509_REVOKED),
-	ASN1_EXP_SEQUENCE_OF_OPT(X509_CRL_INFO, extensions, X509_EXTENSION, 0)
-} ASN1_SEQUENCE_END_enc(X509_CRL_INFO, X509_CRL_INFO)
-
-ASN1_SEQUENCE_ref(X509_CRL, 0, CRYPTO_LOCK_X509_CRL) = {
-	ASN1_SIMPLE(X509_CRL, crl, X509_CRL_INFO),
-	ASN1_SIMPLE(X509_CRL, sig_alg, X509_ALGOR),
-	ASN1_SIMPLE(X509_CRL, signature, ASN1_BIT_STRING)
-} ASN1_SEQUENCE_END_ref(X509_CRL, X509_CRL)
-
-IMPLEMENT_ASN1_FUNCTIONS(X509_REVOKED)
-IMPLEMENT_ASN1_FUNCTIONS(X509_CRL_INFO)
-IMPLEMENT_ASN1_FUNCTIONS(X509_CRL)
-IMPLEMENT_ASN1_DUP_FUNCTION(X509_CRL)
-
-static int X509_REVOKED_cmp(const X509_REVOKED * const *a,
-			const X509_REVOKED * const *b)
-	{
-	return(ASN1_STRING_cmp(
-		(ASN1_STRING *)(*a)->serialNumber,
-		(ASN1_STRING *)(*b)->serialNumber));
-	}
-
-int X509_CRL_add0_revoked(X509_CRL *crl, X509_REVOKED *rev)
-{
-	X509_CRL_INFO *inf;
-	inf = crl->crl;
-	if(!inf->revoked)
-		inf->revoked = sk_X509_REVOKED_new(X509_REVOKED_cmp);
-	if(!inf->revoked || !sk_X509_REVOKED_push(inf->revoked, rev)) {
-		ASN1err(ASN1_F_X509_CRL_ADD0_REVOKED, ERR_R_MALLOC_FAILURE);
-		return 0;
-	}
-	inf->enc.modified = 1;
-	return 1;
-}
-
-IMPLEMENT_STACK_OF(X509_REVOKED)
-IMPLEMENT_ASN1_SET_OF(X509_REVOKED)
-IMPLEMENT_STACK_OF(X509_CRL)
-IMPLEMENT_ASN1_SET_OF(X509_CRL)
diff --git a/crypto/openssl/crypto/asn1/x_exten.c b/crypto/openssl/crypto/asn1/x_exten.c
deleted file mode 100644
index 702421b6c851..000000000000
--- a/crypto/openssl/crypto/asn1/x_exten.c
+++ /dev/null
@@ -1,71 +0,0 @@
-/* x_exten.c */
-/* Written by Dr Stephen N Henson (shenson@bigfoot.com) for the OpenSSL
- * project 2000.
- */
-/* ====================================================================
- * Copyright (c) 2000 The OpenSSL Project.  All rights reserved.
- *
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions
- * are met:
- *
- * 1. Redistributions of source code must retain the above copyright
- *    notice, this list of conditions and the following disclaimer. 
- *
- * 2. Redistributions in binary form must reproduce the above copyright
- *    notice, this list of conditions and the following disclaimer in
- *    the documentation and/or other materials provided with the
- *    distribution.
- *
- * 3. All advertising materials mentioning features or use of this
- *    software must display the following acknowledgment:
- *    "This product includes software developed by the OpenSSL Project
- *    for use in the OpenSSL Toolkit. (http://www.OpenSSL.org/)"
- *
- * 4. The names "OpenSSL Toolkit" and "OpenSSL Project" must not be used to
- *    endorse or promote products derived from this software without
- *    prior written permission. For written permission, please contact
- *    licensing@OpenSSL.org.
- *
- * 5. Products derived from this software may not be called "OpenSSL"
- *    nor may "OpenSSL" appear in their names without prior written
- *    permission of the OpenSSL Project.
- *
- * 6. Redistributions of any form whatsoever must retain the following
- *    acknowledgment:
- *    "This product includes software developed by the OpenSSL Project
- *    for use in the OpenSSL Toolkit (http://www.OpenSSL.org/)"
- *
- * THIS SOFTWARE IS PROVIDED BY THE OpenSSL PROJECT ``AS IS'' AND ANY
- * EXPRESSED OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
- * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR
- * PURPOSE ARE DISCLAIMED.  IN NO EVENT SHALL THE OpenSSL PROJECT OR
- * ITS CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
- * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
- * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
- * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
- * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
- * STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
- * ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED
- * OF THE POSSIBILITY OF SUCH DAMAGE.
- * ====================================================================
- *
- * This product includes cryptographic software written by Eric Young
- * (eay@cryptsoft.com).  This product includes software written by Tim
- * Hudson (tjh@cryptsoft.com).
- *
- */
-
-#include <stddef.h>
-#include <openssl/x509.h>
-#include <openssl/asn1.h>
-#include <openssl/asn1t.h>
-
-ASN1_SEQUENCE(X509_EXTENSION) = {
-	ASN1_SIMPLE(X509_EXTENSION, object, ASN1_OBJECT),
-	ASN1_OPT(X509_EXTENSION, critical, ASN1_BOOLEAN),
-	ASN1_SIMPLE(X509_EXTENSION, value, ASN1_OCTET_STRING)
-} ASN1_SEQUENCE_END(X509_EXTENSION)
-
-IMPLEMENT_ASN1_FUNCTIONS(X509_EXTENSION)
-IMPLEMENT_ASN1_DUP_FUNCTION(X509_EXTENSION)
diff --git a/crypto/openssl/crypto/asn1/x_info.c b/crypto/openssl/crypto/asn1/x_info.c
deleted file mode 100644
index d44f6cdb0197..000000000000
--- a/crypto/openssl/crypto/asn1/x_info.c
+++ /dev/null
@@ -1,114 +0,0 @@
-/* crypto/asn1/x_info.c */
-/* Copyright (C) 1995-1998 Eric Young (eay@cryptsoft.com)
- * All rights reserved.
- *
- * This package is an SSL implementation written
- * by Eric Young (eay@cryptsoft.com).
- * The implementation was written so as to conform with Netscapes SSL.
- * 
- * This library is free for commercial and non-commercial use as long as
- * the following conditions are aheared to.  The following conditions
- * apply to all code found in this distribution, be it the RC4, RSA,
- * lhash, DES, etc., code; not just the SSL code.  The SSL documentation
- * included with this distribution is covered by the same copyright terms
- * except that the holder is Tim Hudson (tjh@cryptsoft.com).
- * 
- * Copyright remains Eric Young's, and as such any Copyright notices in
- * the code are not to be removed.
- * If this package is used in a product, Eric Young should be given attribution
- * as the author of the parts of the library used.
- * This can be in the form of a textual message at program startup or
- * in documentation (online or textual) provided with the package.
- * 
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions
- * are met:
- * 1. Redistributions of source code must retain the copyright
- *    notice, this list of conditions and the following disclaimer.
- * 2. Redistributions in binary form must reproduce the above copyright
- *    notice, this list of conditions and the following disclaimer in the
- *    documentation and/or other materials provided with the distribution.
- * 3. All advertising materials mentioning features or use of this software
- *    must display the following acknowledgement:
- *    "This product includes cryptographic software written by
- *     Eric Young (eay@cryptsoft.com)"
- *    The word 'cryptographic' can be left out if the rouines from the library
- *    being used are not cryptographic related :-).
- * 4. If you include any Windows specific code (or a derivative thereof) from 
- *    the apps directory (application code) you must include an acknowledgement:
- *    "This product includes software written by Tim Hudson (tjh@cryptsoft.com)"
- * 
- * THIS SOFTWARE IS PROVIDED BY ERIC YOUNG ``AS IS'' AND
- * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
- * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
- * ARE DISCLAIMED.  IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE
- * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
- * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
- * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
- * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
- * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
- * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
- * SUCH DAMAGE.
- * 
- * The licence and distribution terms for any publically available version or
- * derivative of this code cannot be changed.  i.e. this code cannot simply be
- * copied and put under another distribution licence
- * [including the GNU Public Licence.]
- */
-
-#include <stdio.h>
-#include "cryptlib.h"
-#include <openssl/evp.h>
-#include <openssl/asn1.h>
-#include <openssl/x509.h>
-
-X509_INFO *X509_INFO_new(void)
-	{
-	X509_INFO *ret=NULL;
-
-	ret=(X509_INFO *)OPENSSL_malloc(sizeof(X509_INFO));
-	if (ret == NULL)
-		{
-		ASN1err(ASN1_F_X509_INFO_NEW,ERR_R_MALLOC_FAILURE);
-		return(NULL);
-		}
- 
-        ret->enc_cipher.cipher=NULL;
-        ret->enc_len=0;
-        ret->enc_data=NULL;
- 
-	ret->references=1;
-	ret->x509=NULL;
-	ret->crl=NULL;
-	ret->x_pkey=NULL;
-	return(ret);
-	}
-
-void X509_INFO_free(X509_INFO *x)
-	{
-	int i;
-
-	if (x == NULL) return;
-
-	i=CRYPTO_add(&x->references,-1,CRYPTO_LOCK_X509_INFO);
-#ifdef REF_PRINT
-	REF_PRINT("X509_INFO",x);
-#endif
-	if (i > 0) return;
-#ifdef REF_CHECK
-	if (i < 0)
-		{
-		fprintf(stderr,"X509_INFO_free, bad reference count\n");
-		abort();
-		}
-#endif
-
-	if (x->x509 != NULL) X509_free(x->x509);
-	if (x->crl != NULL) X509_CRL_free(x->crl);
-	if (x->x_pkey != NULL) X509_PKEY_free(x->x_pkey);
-	if (x->enc_data != NULL) OPENSSL_free(x->enc_data);
-	OPENSSL_free(x);
-	}
-
-IMPLEMENT_STACK_OF(X509_INFO)
-
diff --git a/crypto/openssl/crypto/asn1/x_long.c b/crypto/openssl/crypto/asn1/x_long.c
deleted file mode 100644
index 0db233cb95f6..000000000000
--- a/crypto/openssl/crypto/asn1/x_long.c
+++ /dev/null
@@ -1,171 +0,0 @@
-/* x_long.c */
-/* Written by Dr Stephen N Henson (shenson@bigfoot.com) for the OpenSSL
- * project 2000.
- */
-/* ====================================================================
- * Copyright (c) 2000 The OpenSSL Project.  All rights reserved.
- *
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions
- * are met:
- *
- * 1. Redistributions of source code must retain the above copyright
- *    notice, this list of conditions and the following disclaimer. 
- *
- * 2. Redistributions in binary form must reproduce the above copyright
- *    notice, this list of conditions and the following disclaimer in
- *    the documentation and/or other materials provided with the
- *    distribution.
- *
- * 3. All advertising materials mentioning features or use of this
- *    software must display the following acknowledgment:
- *    "This product includes software developed by the OpenSSL Project
- *    for use in the OpenSSL Toolkit. (http://www.OpenSSL.org/)"
- *
- * 4. The names "OpenSSL Toolkit" and "OpenSSL Project" must not be used to
- *    endorse or promote products derived from this software without
- *    prior written permission. For written permission, please contact
- *    licensing@OpenSSL.org.
- *
- * 5. Products derived from this software may not be called "OpenSSL"
- *    nor may "OpenSSL" appear in their names without prior written
- *    permission of the OpenSSL Project.
- *
- * 6. Redistributions of any form whatsoever must retain the following
- *    acknowledgment:
- *    "This product includes software developed by the OpenSSL Project
- *    for use in the OpenSSL Toolkit (http://www.OpenSSL.org/)"
- *
- * THIS SOFTWARE IS PROVIDED BY THE OpenSSL PROJECT ``AS IS'' AND ANY
- * EXPRESSED OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
- * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR
- * PURPOSE ARE DISCLAIMED.  IN NO EVENT SHALL THE OpenSSL PROJECT OR
- * ITS CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
- * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
- * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
- * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
- * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
- * STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
- * ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED
- * OF THE POSSIBILITY OF SUCH DAMAGE.
- * ====================================================================
- *
- * This product includes cryptographic software written by Eric Young
- * (eay@cryptsoft.com).  This product includes software written by Tim
- * Hudson (tjh@cryptsoft.com).
- *
- */
-
-#include <stdio.h>
-#include "cryptlib.h"
-#include <openssl/asn1t.h>
-#include <openssl/bn.h>
-
-/* Custom primitive type for long handling. This converts between an ASN1_INTEGER
- * and a long directly.
- */
-
-
-static int long_new(ASN1_VALUE **pval, const ASN1_ITEM *it);
-static void long_free(ASN1_VALUE **pval, const ASN1_ITEM *it);
-
-static int long_i2c(ASN1_VALUE **pval, unsigned char *cont, int *putype, const ASN1_ITEM *it);
-static int long_c2i(ASN1_VALUE **pval, const unsigned char *cont, int len, int utype, char *free_cont, const ASN1_ITEM *it);
-
-static ASN1_PRIMITIVE_FUNCS long_pf = {
-	NULL, 0,
-	long_new,
-	long_free,
-	long_free,	/* Clear should set to initial value */
-	long_c2i,
-	long_i2c
-};
-
-ASN1_ITEM_start(LONG)
-	ASN1_ITYPE_PRIMITIVE, V_ASN1_INTEGER, NULL, 0, &long_pf, ASN1_LONG_UNDEF, "LONG"
-ASN1_ITEM_end(LONG)
-
-ASN1_ITEM_start(ZLONG)
-	ASN1_ITYPE_PRIMITIVE, V_ASN1_INTEGER, NULL, 0, &long_pf, 0, "ZLONG"
-ASN1_ITEM_end(ZLONG)
-
-static int long_new(ASN1_VALUE **pval, const ASN1_ITEM *it)
-{
-	*(long *)pval = it->size;
-	return 1;
-}
-
-static void long_free(ASN1_VALUE **pval, const ASN1_ITEM *it)
-{
-	*(long *)pval = it->size;
-}
-
-static int long_i2c(ASN1_VALUE **pval, unsigned char *cont, int *putype, const ASN1_ITEM *it)
-{
-	long ltmp;
-	unsigned long utmp;
-	int clen, pad, i;
-	/* this exists to bypass broken gcc optimization */
-	char *cp = (char *)pval;
-
-	/* use memcpy, because we may not be long aligned */
-	memcpy(&ltmp, cp, sizeof(long));
-
-	if(ltmp == it->size) return -1;
-	/* Convert the long to positive: we subtract one if negative so
-	 * we can cleanly handle the padding if only the MSB of the leading
-	 * octet is set. 
-	 */
-	if(ltmp < 0) utmp = -ltmp - 1;
-	else utmp = ltmp;
-	clen = BN_num_bits_word(utmp);
-	/* If MSB of leading octet set we need to pad */
-	if(!(clen & 0x7)) pad = 1;
-	else pad = 0;
-
-	/* Convert number of bits to number of octets */
-	clen = (clen + 7) >> 3;
-
-	if(cont) {
-		if(pad) *cont++ = (ltmp < 0) ? 0xff : 0;
-		for(i = clen - 1; i >= 0; i--) {
-			cont[i] = (unsigned char)(utmp & 0xff);
-			if(ltmp < 0) cont[i] ^= 0xff;
-			utmp >>= 8;
-		}
-	}
-	return clen + pad;
-}
-
-static int long_c2i(ASN1_VALUE **pval, const unsigned char *cont, int len,
-		    int utype, char *free_cont, const ASN1_ITEM *it)
-{
-	int neg, i;
-	long ltmp;
-	unsigned long utmp = 0;
-	char *cp = (char *)pval;
-	if(len > (int)sizeof(long)) {
-		ASN1err(ASN1_F_LONG_C2I, ASN1_R_INTEGER_TOO_LARGE_FOR_LONG);
-		return 0;
-	}
-	/* Is it negative? */
-	if(len && (cont[0] & 0x80)) neg = 1;
-	else neg = 0;
-	utmp = 0;
-	for(i = 0; i < len; i++) {
-		utmp <<= 8;
-		if(neg) utmp |= cont[i] ^ 0xff;
-		else utmp |= cont[i];
-	}
-	ltmp = (long)utmp;
-	if(neg) {
-		ltmp++;
-		ltmp = -ltmp;
-	}
-	if(ltmp == it->size) {
-		ASN1err(ASN1_F_LONG_C2I, ASN1_R_INTEGER_TOO_LARGE_FOR_LONG);
-		return 0;
-	}
-	memcpy(cp, &ltmp, sizeof(long));
-	return 1;
-}
diff --git a/crypto/openssl/crypto/asn1/x_name.c b/crypto/openssl/crypto/asn1/x_name.c
deleted file mode 100644
index 681e5d110fad..000000000000
--- a/crypto/openssl/crypto/asn1/x_name.c
+++ /dev/null
@@ -1,275 +0,0 @@
-/* crypto/asn1/x_name.c */
-/* Copyright (C) 1995-1998 Eric Young (eay@cryptsoft.com)
- * All rights reserved.
- *
- * This package is an SSL implementation written
- * by Eric Young (eay@cryptsoft.com).
- * The implementation was written so as to conform with Netscapes SSL.
- * 
- * This library is free for commercial and non-commercial use as long as
- * the following conditions are aheared to.  The following conditions
- * apply to all code found in this distribution, be it the RC4, RSA,
- * lhash, DES, etc., code; not just the SSL code.  The SSL documentation
- * included with this distribution is covered by the same copyright terms
- * except that the holder is Tim Hudson (tjh@cryptsoft.com).
- * 
- * Copyright remains Eric Young's, and as such any Copyright notices in
- * the code are not to be removed.
- * If this package is used in a product, Eric Young should be given attribution
- * as the author of the parts of the library used.
- * This can be in the form of a textual message at program startup or
- * in documentation (online or textual) provided with the package.
- * 
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions
- * are met:
- * 1. Redistributions of source code must retain the copyright
- *    notice, this list of conditions and the following disclaimer.
- * 2. Redistributions in binary form must reproduce the above copyright
- *    notice, this list of conditions and the following disclaimer in the
- *    documentation and/or other materials provided with the distribution.
- * 3. All advertising materials mentioning features or use of this software
- *    must display the following acknowledgement:
- *    "This product includes cryptographic software written by
- *     Eric Young (eay@cryptsoft.com)"
- *    The word 'cryptographic' can be left out if the rouines from the library
- *    being used are not cryptographic related :-).
- * 4. If you include any Windows specific code (or a derivative thereof) from 
- *    the apps directory (application code) you must include an acknowledgement:
- *    "This product includes software written by Tim Hudson (tjh@cryptsoft.com)"
- * 
- * THIS SOFTWARE IS PROVIDED BY ERIC YOUNG ``AS IS'' AND
- * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
- * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
- * ARE DISCLAIMED.  IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE
- * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
- * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
- * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
- * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
- * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
- * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
- * SUCH DAMAGE.
- * 
- * The licence and distribution terms for any publically available version or
- * derivative of this code cannot be changed.  i.e. this code cannot simply be
- * copied and put under another distribution licence
- * [including the GNU Public Licence.]
- */
-
-#include <stdio.h>
-#include "cryptlib.h"
-#include <openssl/asn1t.h>
-#include <openssl/x509.h>
-
-static int x509_name_ex_d2i(ASN1_VALUE **val, const unsigned char **in, long len, const ASN1_ITEM *it,
-					int tag, int aclass, char opt, ASN1_TLC *ctx);
-
-static int x509_name_ex_i2d(ASN1_VALUE **val, unsigned char **out, const ASN1_ITEM *it, int tag, int aclass);
-static int x509_name_ex_new(ASN1_VALUE **val, const ASN1_ITEM *it);
-static void x509_name_ex_free(ASN1_VALUE **val, const ASN1_ITEM *it);
-
-static int x509_name_encode(X509_NAME *a);
-
-ASN1_SEQUENCE(X509_NAME_ENTRY) = {
-	ASN1_SIMPLE(X509_NAME_ENTRY, object, ASN1_OBJECT),
-	ASN1_SIMPLE(X509_NAME_ENTRY, value, ASN1_PRINTABLE)
-} ASN1_SEQUENCE_END(X509_NAME_ENTRY)
-
-IMPLEMENT_ASN1_FUNCTIONS(X509_NAME_ENTRY)
-IMPLEMENT_ASN1_DUP_FUNCTION(X509_NAME_ENTRY)
-
-/* For the "Name" type we need a SEQUENCE OF { SET OF X509_NAME_ENTRY }
- * so declare two template wrappers for this
- */
-
-ASN1_ITEM_TEMPLATE(X509_NAME_ENTRIES) =
-	ASN1_EX_TEMPLATE_TYPE(ASN1_TFLG_SET_OF, 0, RDNS, X509_NAME_ENTRY)
-ASN1_ITEM_TEMPLATE_END(X509_NAME_ENTRIES)
-
-ASN1_ITEM_TEMPLATE(X509_NAME_INTERNAL) =
-	ASN1_EX_TEMPLATE_TYPE(ASN1_TFLG_SEQUENCE_OF, 0, Name, X509_NAME_ENTRIES)
-ASN1_ITEM_TEMPLATE_END(X509_NAME_INTERNAL)
-
-/* Normally that's where it would end: we'd have two nested STACK structures
- * representing the ASN1. Unfortunately X509_NAME uses a completely different
- * form and caches encodings so we have to process the internal form and convert
- * to the external form.
- */
-
-const ASN1_EXTERN_FUNCS x509_name_ff = {
-	NULL,
-	x509_name_ex_new,
-	x509_name_ex_free,
-	0,	/* Default clear behaviour is OK */
-	x509_name_ex_d2i,
-	x509_name_ex_i2d
-};
-
-IMPLEMENT_EXTERN_ASN1(X509_NAME, V_ASN1_SEQUENCE, x509_name_ff) 
-
-IMPLEMENT_ASN1_FUNCTIONS(X509_NAME)
-IMPLEMENT_ASN1_DUP_FUNCTION(X509_NAME)
-
-static int x509_name_ex_new(ASN1_VALUE **val, const ASN1_ITEM *it)
-{
-	X509_NAME *ret = NULL;
-	ret = OPENSSL_malloc(sizeof(X509_NAME));
-	if(!ret) goto memerr;
-	if ((ret->entries=sk_X509_NAME_ENTRY_new_null()) == NULL)
-		goto memerr;
-	if((ret->bytes = BUF_MEM_new()) == NULL) goto memerr;
-	ret->modified=1;
-	*val = (ASN1_VALUE *)ret;
-	return 1;
-
- memerr:
-	ASN1err(ASN1_F_X509_NAME_EX_NEW, ERR_R_MALLOC_FAILURE);
-	if (ret)
-		{
-		if (ret->entries)
-			sk_X509_NAME_ENTRY_free(ret->entries);
-		OPENSSL_free(ret);
-		}
-	return 0;
-}
-
-static void x509_name_ex_free(ASN1_VALUE **pval, const ASN1_ITEM *it)
-{
-	X509_NAME *a;
-	if(!pval || !*pval)
-	    return;
-	a = (X509_NAME *)*pval;
-
-	BUF_MEM_free(a->bytes);
-	sk_X509_NAME_ENTRY_pop_free(a->entries,X509_NAME_ENTRY_free);
-	OPENSSL_free(a);
-	*pval = NULL;
-}
-
-/* Used with sk_pop_free() to free up the internal representation.
- * NB: we only free the STACK and not its contents because it is
- * already present in the X509_NAME structure.
- */
-
-static void sk_internal_free(void *a)
-{
-	sk_free(a);
-}
-
-static int x509_name_ex_d2i(ASN1_VALUE **val, const unsigned char **in, long len, const ASN1_ITEM *it,
-					int tag, int aclass, char opt, ASN1_TLC *ctx)
-{
-	const unsigned char *p = *in, *q;
-	STACK *intname = NULL, **intname_pp = &intname;
-	int i, j, ret;
-	X509_NAME *nm = NULL, **nm_pp = &nm;
-	STACK_OF(X509_NAME_ENTRY) *entries;
-	X509_NAME_ENTRY *entry;
-	q = p;
-
-	/* Get internal representation of Name */
-	ret = ASN1_item_ex_d2i((ASN1_VALUE **)intname_pp,
-			       &p, len, ASN1_ITEM_rptr(X509_NAME_INTERNAL),
-			       tag, aclass, opt, ctx);
-	
-	if(ret <= 0) return ret;
-
-	if(*val) x509_name_ex_free(val, NULL);
-	if(!x509_name_ex_new((ASN1_VALUE **)nm_pp, NULL)) goto err;
-	/* We've decoded it: now cache encoding */
-	if(!BUF_MEM_grow(nm->bytes, p - q)) goto err;
-	memcpy(nm->bytes->data, q, p - q);
-
-	/* Convert internal representation to X509_NAME structure */
-	for(i = 0; i < sk_num(intname); i++) {
-		entries = (STACK_OF(X509_NAME_ENTRY) *)sk_value(intname, i);
-		for(j = 0; j < sk_X509_NAME_ENTRY_num(entries); j++) {
-			entry = sk_X509_NAME_ENTRY_value(entries, j);
-			entry->set = i;
-			if(!sk_X509_NAME_ENTRY_push(nm->entries, entry))
-				goto err;
-		}
-		sk_X509_NAME_ENTRY_free(entries);
-	}
-	sk_free(intname);
-	nm->modified = 0;
-	*val = (ASN1_VALUE *)nm;
-	*in = p;
-	return ret;
-	err:
-	ASN1err(ASN1_F_X509_NAME_EX_D2I, ERR_R_NESTED_ASN1_ERROR);
-	return 0;
-}
-
-static int x509_name_ex_i2d(ASN1_VALUE **val, unsigned char **out, const ASN1_ITEM *it, int tag, int aclass)
-{
-	int ret;
-	X509_NAME *a = (X509_NAME *)*val;
-	if(a->modified) {
-		ret = x509_name_encode((X509_NAME *)a);
-		if(ret < 0) return ret;
-	}
-	ret = a->bytes->length;
-	if(out != NULL) {
-		memcpy(*out,a->bytes->data,ret);
-		*out+=ret;
-	}
-	return ret;
-}
-
-static int x509_name_encode(X509_NAME *a)
-{
-	STACK *intname = NULL, **intname_pp = &intname;
-	int len;
-	unsigned char *p;
-	STACK_OF(X509_NAME_ENTRY) *entries = NULL;
-	X509_NAME_ENTRY *entry;
-	int i, set = -1;
-	intname = sk_new_null();
-	if(!intname) goto memerr;
-	for(i = 0; i < sk_X509_NAME_ENTRY_num(a->entries); i++) {
-		entry = sk_X509_NAME_ENTRY_value(a->entries, i);
-		if(entry->set != set) {
-			entries = sk_X509_NAME_ENTRY_new_null();
-			if(!entries) goto memerr;
-			if(!sk_push(intname, (char *)entries)) goto memerr;
-			set = entry->set;
-		}
-		if(!sk_X509_NAME_ENTRY_push(entries, entry)) goto memerr;
-	}
-	len = ASN1_item_ex_i2d((ASN1_VALUE **)intname_pp, NULL,
-			       ASN1_ITEM_rptr(X509_NAME_INTERNAL), -1, -1);
-	if (!BUF_MEM_grow(a->bytes,len)) goto memerr;
-	p=(unsigned char *)a->bytes->data;
-	ASN1_item_ex_i2d((ASN1_VALUE **)intname_pp,
-			 &p, ASN1_ITEM_rptr(X509_NAME_INTERNAL), -1, -1);
-	sk_pop_free(intname, sk_internal_free);
-	a->modified = 0;
-	return len;
-	memerr:
-	sk_pop_free(intname, sk_internal_free);
-	ASN1err(ASN1_F_X509_NAME_ENCODE, ERR_R_MALLOC_FAILURE);
-	return -1;
-}
-
-
-int X509_NAME_set(X509_NAME **xn, X509_NAME *name)
-	{
-	X509_NAME *in;
-
-	if (!xn || !name) return(0);
-
-	if (*xn != name)
-		{
-		in=X509_NAME_dup(name);
-		if (in != NULL)
-			{
-			X509_NAME_free(*xn);
-			*xn=in;
-			}
-		}
-	return(*xn != NULL);
-	}
-	
-IMPLEMENT_STACK_OF(X509_NAME_ENTRY)
-IMPLEMENT_ASN1_SET_OF(X509_NAME_ENTRY)
diff --git a/crypto/openssl/crypto/asn1/x_pkey.c b/crypto/openssl/crypto/asn1/x_pkey.c
deleted file mode 100644
index 8453618426fb..000000000000
--- a/crypto/openssl/crypto/asn1/x_pkey.c
+++ /dev/null
@@ -1,151 +0,0 @@
-/* crypto/asn1/x_pkey.c */
-/* Copyright (C) 1995-1998 Eric Young (eay@cryptsoft.com)
- * All rights reserved.
- *
- * This package is an SSL implementation written
- * by Eric Young (eay@cryptsoft.com).
- * The implementation was written so as to conform with Netscapes SSL.
- * 
- * This library is free for commercial and non-commercial use as long as
- * the following conditions are aheared to.  The following conditions
- * apply to all code found in this distribution, be it the RC4, RSA,
- * lhash, DES, etc., code; not just the SSL code.  The SSL documentation
- * included with this distribution is covered by the same copyright terms
- * except that the holder is Tim Hudson (tjh@cryptsoft.com).
- * 
- * Copyright remains Eric Young's, and as such any Copyright notices in
- * the code are not to be removed.
- * If this package is used in a product, Eric Young should be given attribution
- * as the author of the parts of the library used.
- * This can be in the form of a textual message at program startup or
- * in documentation (online or textual) provided with the package.
- * 
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions
- * are met:
- * 1. Redistributions of source code must retain the copyright
- *    notice, this list of conditions and the following disclaimer.
- * 2. Redistributions in binary form must reproduce the above copyright
- *    notice, this list of conditions and the following disclaimer in the
- *    documentation and/or other materials provided with the distribution.
- * 3. All advertising materials mentioning features or use of this software
- *    must display the following acknowledgement:
- *    "This product includes cryptographic software written by
- *     Eric Young (eay@cryptsoft.com)"
- *    The word 'cryptographic' can be left out if the rouines from the library
- *    being used are not cryptographic related :-).
- * 4. If you include any Windows specific code (or a derivative thereof) from 
- *    the apps directory (application code) you must include an acknowledgement:
- *    "This product includes software written by Tim Hudson (tjh@cryptsoft.com)"
- * 
- * THIS SOFTWARE IS PROVIDED BY ERIC YOUNG ``AS IS'' AND
- * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
- * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
- * ARE DISCLAIMED.  IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE
- * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
- * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
- * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
- * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
- * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
- * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
- * SUCH DAMAGE.
- * 
- * The licence and distribution terms for any publically available version or
- * derivative of this code cannot be changed.  i.e. this code cannot simply be
- * copied and put under another distribution licence
- * [including the GNU Public Licence.]
- */
-
-#include <stdio.h>
-#include "cryptlib.h"
-#include <openssl/evp.h>
-#include <openssl/objects.h>
-#include <openssl/asn1_mac.h>
-#include <openssl/x509.h>
-
-/* need to implement */
-int i2d_X509_PKEY(X509_PKEY *a, unsigned char **pp)
-	{
-	return(0);
-	}
-
-X509_PKEY *d2i_X509_PKEY(X509_PKEY **a, const unsigned char **pp, long length)
-	{
-	int i;
-	M_ASN1_D2I_vars(a,X509_PKEY *,X509_PKEY_new);
-
-	M_ASN1_D2I_Init();
-	M_ASN1_D2I_start_sequence();
-	M_ASN1_D2I_get_x(X509_ALGOR,ret->enc_algor,d2i_X509_ALGOR);
-	M_ASN1_D2I_get_x(ASN1_OCTET_STRING,ret->enc_pkey,d2i_ASN1_OCTET_STRING);
-
-	ret->cipher.cipher=EVP_get_cipherbyname(
-		OBJ_nid2ln(OBJ_obj2nid(ret->enc_algor->algorithm)));
-	if (ret->cipher.cipher == NULL)
-		{
-		c.error=ASN1_R_UNSUPPORTED_CIPHER;
-		c.line=__LINE__;
-		goto err;
-		}
-	if (ret->enc_algor->parameter->type == V_ASN1_OCTET_STRING) 
-		{
-		i=ret->enc_algor->parameter->value.octet_string->length;
-		if (i > EVP_MAX_IV_LENGTH)
-			{
-			c.error=ASN1_R_IV_TOO_LARGE;
-			c.line=__LINE__;
-			goto err;
-			}
-		memcpy(ret->cipher.iv,
-			ret->enc_algor->parameter->value.octet_string->data,i);
-		}
-	else
-		memset(ret->cipher.iv,0,EVP_MAX_IV_LENGTH);
-	M_ASN1_D2I_Finish(a,X509_PKEY_free,ASN1_F_D2I_X509_PKEY);
-	}
-
-X509_PKEY *X509_PKEY_new(void)
-	{
-	X509_PKEY *ret=NULL;
-	ASN1_CTX c;
-
-	M_ASN1_New_Malloc(ret,X509_PKEY);
-	ret->version=0;
-	M_ASN1_New(ret->enc_algor,X509_ALGOR_new);
-	M_ASN1_New(ret->enc_pkey,M_ASN1_OCTET_STRING_new);
-	ret->dec_pkey=NULL;
-	ret->key_length=0;
-	ret->key_data=NULL;
-	ret->key_free=0;
-	ret->cipher.cipher=NULL;
-	memset(ret->cipher.iv,0,EVP_MAX_IV_LENGTH);
-	ret->references=1;
-	return(ret);
-	M_ASN1_New_Error(ASN1_F_X509_PKEY_NEW);
-	}
-
-void X509_PKEY_free(X509_PKEY *x)
-	{
-	int i;
-
-	if (x == NULL) return;
-
-	i=CRYPTO_add(&x->references,-1,CRYPTO_LOCK_X509_PKEY);
-#ifdef REF_PRINT
-	REF_PRINT("X509_PKEY",x);
-#endif
-	if (i > 0) return;
-#ifdef REF_CHECK
-	if (i < 0)
-		{
-		fprintf(stderr,"X509_PKEY_free, bad reference count\n");
-		abort();
-		}
-#endif
-
-	if (x->enc_algor != NULL) X509_ALGOR_free(x->enc_algor);
-	if (x->enc_pkey != NULL) M_ASN1_OCTET_STRING_free(x->enc_pkey);
-	if (x->dec_pkey != NULL)EVP_PKEY_free(x->dec_pkey);
-	if ((x->key_data != NULL) && (x->key_free)) OPENSSL_free(x->key_data);
-	OPENSSL_free(x);
-	}
diff --git a/crypto/openssl/crypto/asn1/x_pubkey.c b/crypto/openssl/crypto/asn1/x_pubkey.c
deleted file mode 100644
index 91c275611611..000000000000
--- a/crypto/openssl/crypto/asn1/x_pubkey.c
+++ /dev/null
@@ -1,531 +0,0 @@
-/* crypto/asn1/x_pubkey.c */
-/* Copyright (C) 1995-1998 Eric Young (eay@cryptsoft.com)
- * All rights reserved.
- *
- * This package is an SSL implementation written
- * by Eric Young (eay@cryptsoft.com).
- * The implementation was written so as to conform with Netscapes SSL.
- * 
- * This library is free for commercial and non-commercial use as long as
- * the following conditions are aheared to.  The following conditions
- * apply to all code found in this distribution, be it the RC4, RSA,
- * lhash, DES, etc., code; not just the SSL code.  The SSL documentation
- * included with this distribution is covered by the same copyright terms
- * except that the holder is Tim Hudson (tjh@cryptsoft.com).
- * 
- * Copyright remains Eric Young's, and as such any Copyright notices in
- * the code are not to be removed.
- * If this package is used in a product, Eric Young should be given attribution
- * as the author of the parts of the library used.
- * This can be in the form of a textual message at program startup or
- * in documentation (online or textual) provided with the package.
- * 
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions
- * are met:
- * 1. Redistributions of source code must retain the copyright
- *    notice, this list of conditions and the following disclaimer.
- * 2. Redistributions in binary form must reproduce the above copyright
- *    notice, this list of conditions and the following disclaimer in the
- *    documentation and/or other materials provided with the distribution.
- * 3. All advertising materials mentioning features or use of this software
- *    must display the following acknowledgement:
- *    "This product includes cryptographic software written by
- *     Eric Young (eay@cryptsoft.com)"
- *    The word 'cryptographic' can be left out if the rouines from the library
- *    being used are not cryptographic related :-).
- * 4. If you include any Windows specific code (or a derivative thereof) from 
- *    the apps directory (application code) you must include an acknowledgement:
- *    "This product includes software written by Tim Hudson (tjh@cryptsoft.com)"
- * 
- * THIS SOFTWARE IS PROVIDED BY ERIC YOUNG ``AS IS'' AND
- * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
- * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
- * ARE DISCLAIMED.  IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE
- * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
- * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
- * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
- * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
- * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
- * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
- * SUCH DAMAGE.
- * 
- * The licence and distribution terms for any publically available version or
- * derivative of this code cannot be changed.  i.e. this code cannot simply be
- * copied and put under another distribution licence
- * [including the GNU Public Licence.]
- */
-
-#include <stdio.h>
-#include "cryptlib.h"
-#include <openssl/asn1t.h>
-#include <openssl/x509.h>
-#ifndef OPENSSL_NO_RSA
-#include <openssl/rsa.h>
-#endif
-#ifndef OPENSSL_NO_DSA
-#include <openssl/dsa.h>
-#endif
-
-/* Minor tweak to operation: free up EVP_PKEY */
-static int pubkey_cb(int operation, ASN1_VALUE **pval, const ASN1_ITEM *it)
-	{
-	if (operation == ASN1_OP_FREE_POST)
-		{
-		X509_PUBKEY *pubkey = (X509_PUBKEY *)*pval;
-		EVP_PKEY_free(pubkey->pkey);
-		}
-	return 1;
-	}
-
-ASN1_SEQUENCE_cb(X509_PUBKEY, pubkey_cb) = {
-	ASN1_SIMPLE(X509_PUBKEY, algor, X509_ALGOR),
-	ASN1_SIMPLE(X509_PUBKEY, public_key, ASN1_BIT_STRING)
-} ASN1_SEQUENCE_END_cb(X509_PUBKEY, X509_PUBKEY)
-
-IMPLEMENT_ASN1_FUNCTIONS(X509_PUBKEY)
-
-int X509_PUBKEY_set(X509_PUBKEY **x, EVP_PKEY *pkey)
-	{
-	X509_PUBKEY *pk=NULL;
-	X509_ALGOR *a;
-	ASN1_OBJECT *o;
-	unsigned char *s,*p = NULL;
-	int i;
-
-	if (x == NULL) return(0);
-
-	if ((pk=X509_PUBKEY_new()) == NULL) goto err;
-	a=pk->algor;
-
-	/* set the algorithm id */
-	if ((o=OBJ_nid2obj(pkey->type)) == NULL) goto err;
-	ASN1_OBJECT_free(a->algorithm);
-	a->algorithm=o;
-
-	/* Set the parameter list */
-	if (!pkey->save_parameters || (pkey->type == EVP_PKEY_RSA))
-		{
-		if ((a->parameter == NULL) ||
-			(a->parameter->type != V_ASN1_NULL))
-			{
-			ASN1_TYPE_free(a->parameter);
-			if (!(a->parameter=ASN1_TYPE_new()))
-				{
-				X509err(X509_F_X509_PUBKEY_SET,ERR_R_MALLOC_FAILURE);
-				goto err;
-				}
-			a->parameter->type=V_ASN1_NULL;
-			}
-		}
-#ifndef OPENSSL_NO_DSA
-	else if (pkey->type == EVP_PKEY_DSA)
-		{
-		unsigned char *pp;
-		DSA *dsa;
-		
-		dsa=pkey->pkey.dsa;
-		dsa->write_params=0;
-		ASN1_TYPE_free(a->parameter);
-		if ((i=i2d_DSAparams(dsa,NULL)) <= 0)
-			goto err;
-		if (!(p=(unsigned char *)OPENSSL_malloc(i)))
-			{
-			X509err(X509_F_X509_PUBKEY_SET,ERR_R_MALLOC_FAILURE);
-			goto err;
-			}
-		pp=p;
-		i2d_DSAparams(dsa,&pp);
-		if (!(a->parameter=ASN1_TYPE_new()))
-			{
-			OPENSSL_free(p);
-			X509err(X509_F_X509_PUBKEY_SET,ERR_R_MALLOC_FAILURE);
-			goto err;
-			}
-		a->parameter->type=V_ASN1_SEQUENCE;
-		if (!(a->parameter->value.sequence=ASN1_STRING_new()))
-			{
-			OPENSSL_free(p);
-			X509err(X509_F_X509_PUBKEY_SET,ERR_R_MALLOC_FAILURE);
-			goto err;
-			}
-		if (!ASN1_STRING_set(a->parameter->value.sequence,p,i))
-			{
-			OPENSSL_free(p);
-			X509err(X509_F_X509_PUBKEY_SET,ERR_R_MALLOC_FAILURE);
-			goto err;
-			}
-		OPENSSL_free(p);
-		}
-#endif
-#ifndef OPENSSL_NO_EC
-	else if (pkey->type == EVP_PKEY_EC)
-		{
-		int nid=0;
-		unsigned char *pp;
-		EC_KEY *ec_key;
-		const EC_GROUP *group;
-		
-		ec_key = pkey->pkey.ec;
-		ASN1_TYPE_free(a->parameter);
-
-		if ((a->parameter = ASN1_TYPE_new()) == NULL)
-			{
-			X509err(X509_F_X509_PUBKEY_SET, ERR_R_ASN1_LIB);
-			goto err;
-			}
-
-		group = EC_KEY_get0_group(ec_key);
-		if (EC_GROUP_get_asn1_flag(group)
-                     && (nid = EC_GROUP_get_curve_name(group)))
-			{
-			/* just set the OID */
-			a->parameter->type = V_ASN1_OBJECT;
-			a->parameter->value.object = OBJ_nid2obj(nid);
-			}
-		else /* explicit parameters */
-			{
-			if ((i = i2d_ECParameters(ec_key, NULL)) == 0)
-				{
-				X509err(X509_F_X509_PUBKEY_SET, ERR_R_EC_LIB);
-				goto err;
-				}
-			if ((p = (unsigned char *) OPENSSL_malloc(i)) == NULL)
-				{
-				X509err(X509_F_X509_PUBKEY_SET, ERR_R_MALLOC_FAILURE);
-				goto err;
-				}	
-			pp = p;
-			if (!i2d_ECParameters(ec_key, &pp))
-				{
-				X509err(X509_F_X509_PUBKEY_SET, ERR_R_EC_LIB);
-				OPENSSL_free(p);
-				goto err;
-				}
-			a->parameter->type = V_ASN1_SEQUENCE;
-			if ((a->parameter->value.sequence = ASN1_STRING_new()) == NULL)
-				{
-				X509err(X509_F_X509_PUBKEY_SET, ERR_R_ASN1_LIB);
-				OPENSSL_free(p);
-				goto err;
-				}
-			ASN1_STRING_set(a->parameter->value.sequence, p, i);
-			OPENSSL_free(p);
-			}
-		}
-#endif
-	else if (1)
-		{
-		X509err(X509_F_X509_PUBKEY_SET,X509_R_UNSUPPORTED_ALGORITHM);
-		goto err;
-		}
-
-	if ((i=i2d_PublicKey(pkey,NULL)) <= 0) goto err;
-	if ((s=(unsigned char *)OPENSSL_malloc(i+1)) == NULL)
-		{
-		X509err(X509_F_X509_PUBKEY_SET,ERR_R_MALLOC_FAILURE);
-		goto err;
-		}
-	p=s;
-	i2d_PublicKey(pkey,&p);
-	if (!M_ASN1_BIT_STRING_set(pk->public_key,s,i))
-		{
-		X509err(X509_F_X509_PUBKEY_SET,ERR_R_MALLOC_FAILURE);
-		goto err;
-		}
-  	/* Set number of unused bits to zero */
-	pk->public_key->flags&= ~(ASN1_STRING_FLAG_BITS_LEFT|0x07);
-	pk->public_key->flags|=ASN1_STRING_FLAG_BITS_LEFT;
-
-	OPENSSL_free(s);
-
-#if 0
-	CRYPTO_add(&pkey->references,1,CRYPTO_LOCK_EVP_PKEY);
-	pk->pkey=pkey;
-#endif
-
-	if (*x != NULL)
-		X509_PUBKEY_free(*x);
-
-	*x=pk;
-
-	return 1;
-err:
-	if (pk != NULL) X509_PUBKEY_free(pk);
-	return 0;
-	}
-
-EVP_PKEY *X509_PUBKEY_get(X509_PUBKEY *key)
-	{
-	EVP_PKEY *ret=NULL;
-	long j;
-	int type;
-	const unsigned char *p;
-#if !defined(OPENSSL_NO_DSA) || !defined(OPENSSL_NO_ECDSA)
-	const unsigned char *cp;
-	X509_ALGOR *a;
-#endif
-
-	if (key == NULL) goto err;
-
-	if (key->pkey != NULL)
-		{
-		CRYPTO_add(&key->pkey->references, 1, CRYPTO_LOCK_EVP_PKEY);
-		return(key->pkey);
-		}
-
-	if (key->public_key == NULL) goto err;
-
-	type=OBJ_obj2nid(key->algor->algorithm);
-	if ((ret = EVP_PKEY_new()) == NULL)
-		{
-		X509err(X509_F_X509_PUBKEY_GET, ERR_R_MALLOC_FAILURE);
-		goto err;
-		}
-	ret->type = EVP_PKEY_type(type);
-
-	/* the parameters must be extracted before the public key (ECDSA!) */
-	
-#if !defined(OPENSSL_NO_DSA) || !defined(OPENSSL_NO_ECDSA)
-	a=key->algor;
-#endif
-
-	if (0)
-		;
-#ifndef OPENSSL_NO_DSA
-	else if (ret->type == EVP_PKEY_DSA)
-		{
-		if (a->parameter && (a->parameter->type == V_ASN1_SEQUENCE))
-			{
-			if ((ret->pkey.dsa = DSA_new()) == NULL)
-				{
-				X509err(X509_F_X509_PUBKEY_GET, ERR_R_MALLOC_FAILURE);
-				goto err;
-				}
-			ret->pkey.dsa->write_params=0;
-			cp=p=a->parameter->value.sequence->data;
-			j=a->parameter->value.sequence->length;
-			if (!d2i_DSAparams(&ret->pkey.dsa, &cp, (long)j))
-				goto err;
-			}
-		ret->save_parameters=1;
-		}
-#endif
-#ifndef OPENSSL_NO_EC
-	else if (ret->type == EVP_PKEY_EC)
-		{
-		if (a->parameter && (a->parameter->type == V_ASN1_SEQUENCE))
-			{
-			/* type == V_ASN1_SEQUENCE => we have explicit parameters
-                         * (e.g. parameters in the X9_62_EC_PARAMETERS-structure )
-			 */
-			if ((ret->pkey.ec= EC_KEY_new()) == NULL)
-				{
-				X509err(X509_F_X509_PUBKEY_GET, 
-					ERR_R_MALLOC_FAILURE);
-				goto err;
-				}
-			cp = p = a->parameter->value.sequence->data;
-			j = a->parameter->value.sequence->length;
-			if (!d2i_ECParameters(&ret->pkey.ec, &cp, (long)j))
-				{
-				X509err(X509_F_X509_PUBKEY_GET, ERR_R_EC_LIB);
-				goto err;
-				}
-			}
-		else if (a->parameter && (a->parameter->type == V_ASN1_OBJECT))
-			{
-			/* type == V_ASN1_OBJECT => the parameters are given
-			 * by an asn1 OID
-			 */
-			EC_KEY   *ec_key;
-			EC_GROUP *group;
-
-			if (ret->pkey.ec == NULL)
-				ret->pkey.ec = EC_KEY_new();
-			ec_key = ret->pkey.ec;
-			if (ec_key == NULL)
-				goto err;
-			group = EC_GROUP_new_by_curve_name(OBJ_obj2nid(a->parameter->value.object));
-			if (group == NULL)
-				goto err;
-			EC_GROUP_set_asn1_flag(group, OPENSSL_EC_NAMED_CURVE);
-			if (EC_KEY_set_group(ec_key, group) == 0)
-				goto err;
-			EC_GROUP_free(group);
-			}
-			/* the case implicitlyCA is currently not implemented */
-		ret->save_parameters = 1;
-		}
-#endif
-
-	p=key->public_key->data;
-        j=key->public_key->length;
-        if (!d2i_PublicKey(type, &ret, &p, (long)j))
-		{
-		X509err(X509_F_X509_PUBKEY_GET, X509_R_ERR_ASN1_LIB);
-		goto err;
-		}
-
-	key->pkey = ret;
-	CRYPTO_add(&ret->references, 1, CRYPTO_LOCK_EVP_PKEY);
-	return(ret);
-err:
-	if (ret != NULL)
-		EVP_PKEY_free(ret);
-	return(NULL);
-	}
-
-/* Now two pseudo ASN1 routines that take an EVP_PKEY structure
- * and encode or decode as X509_PUBKEY
- */
-
-EVP_PKEY *d2i_PUBKEY(EVP_PKEY **a, const unsigned char **pp,
-	     long length)
-	{
-	X509_PUBKEY *xpk;
-	EVP_PKEY *pktmp;
-	xpk = d2i_X509_PUBKEY(NULL, pp, length);
-	if(!xpk) return NULL;
-	pktmp = X509_PUBKEY_get(xpk);
-	X509_PUBKEY_free(xpk);
-	if(!pktmp) return NULL;
-	if(a)
-		{
-		EVP_PKEY_free(*a);
-		*a = pktmp;
-		}
-	return pktmp;
-	}
-
-int i2d_PUBKEY(EVP_PKEY *a, unsigned char **pp)
-	{
-	X509_PUBKEY *xpk=NULL;
-	int ret;
-	if(!a) return 0;
-	if(!X509_PUBKEY_set(&xpk, a)) return 0;
-	ret = i2d_X509_PUBKEY(xpk, pp);
-	X509_PUBKEY_free(xpk);
-	return ret;
-	}
-
-/* The following are equivalents but which return RSA and DSA
- * keys
- */
-#ifndef OPENSSL_NO_RSA
-RSA *d2i_RSA_PUBKEY(RSA **a, const unsigned char **pp,
-	     long length)
-	{
-	EVP_PKEY *pkey;
-	RSA *key;
-	const unsigned char *q;
-	q = *pp;
-	pkey = d2i_PUBKEY(NULL, &q, length);
-	if (!pkey) return NULL;
-	key = EVP_PKEY_get1_RSA(pkey);
-	EVP_PKEY_free(pkey);
-	if (!key) return NULL;
-	*pp = q;
-	if (a)
-		{
-		RSA_free(*a);
-		*a = key;
-		}
-	return key;
-	}
-
-int i2d_RSA_PUBKEY(RSA *a, unsigned char **pp)
-	{
-	EVP_PKEY *pktmp;
-	int ret;
-	if (!a) return 0;
-	pktmp = EVP_PKEY_new();
-	if (!pktmp)
-		{
-		ASN1err(ASN1_F_I2D_RSA_PUBKEY, ERR_R_MALLOC_FAILURE);
-		return 0;
-		}
-	EVP_PKEY_set1_RSA(pktmp, a);
-	ret = i2d_PUBKEY(pktmp, pp);
-	EVP_PKEY_free(pktmp);
-	return ret;
-	}
-#endif
-
-#ifndef OPENSSL_NO_DSA
-DSA *d2i_DSA_PUBKEY(DSA **a, const unsigned char **pp,
-	     long length)
-	{
-	EVP_PKEY *pkey;
-	DSA *key;
-	const unsigned char *q;
-	q = *pp;
-	pkey = d2i_PUBKEY(NULL, &q, length);
-	if (!pkey) return NULL;
-	key = EVP_PKEY_get1_DSA(pkey);
-	EVP_PKEY_free(pkey);
-	if (!key) return NULL;
-	*pp = q;
-	if (a)
-		{
-		DSA_free(*a);
-		*a = key;
-		}
-	return key;
-	}
-
-int i2d_DSA_PUBKEY(DSA *a, unsigned char **pp)
-	{
-	EVP_PKEY *pktmp;
-	int ret;
-	if(!a) return 0;
-	pktmp = EVP_PKEY_new();
-	if(!pktmp)
-		{
-		ASN1err(ASN1_F_I2D_DSA_PUBKEY, ERR_R_MALLOC_FAILURE);
-		return 0;
-		}
-	EVP_PKEY_set1_DSA(pktmp, a);
-	ret = i2d_PUBKEY(pktmp, pp);
-	EVP_PKEY_free(pktmp);
-	return ret;
-	}
-#endif
-
-#ifndef OPENSSL_NO_EC
-EC_KEY *d2i_EC_PUBKEY(EC_KEY **a, const unsigned char **pp, long length)
-	{
-	EVP_PKEY *pkey;
-	EC_KEY *key;
-	const unsigned char *q;
-	q = *pp;
-	pkey = d2i_PUBKEY(NULL, &q, length);
-	if (!pkey) return(NULL);
-	key = EVP_PKEY_get1_EC_KEY(pkey);
-	EVP_PKEY_free(pkey);
-	if (!key)  return(NULL);
-	*pp = q;
-	if (a)
-		{
-		EC_KEY_free(*a);
-		*a = key;
-		}
-	return(key);
-	}
-
-int i2d_EC_PUBKEY(EC_KEY *a, unsigned char **pp)
-	{
-	EVP_PKEY *pktmp;
-	int ret;
-	if (!a)	return(0);
-	if ((pktmp = EVP_PKEY_new()) == NULL)
-		{
-		ASN1err(ASN1_F_I2D_EC_PUBKEY, ERR_R_MALLOC_FAILURE);
-		return(0);
-		}
-	EVP_PKEY_set1_EC_KEY(pktmp, a);
-	ret = i2d_PUBKEY(pktmp, pp);
-	EVP_PKEY_free(pktmp);
-	return(ret);
-	}
-#endif
diff --git a/crypto/openssl/crypto/asn1/x_req.c b/crypto/openssl/crypto/asn1/x_req.c
deleted file mode 100644
index 59ca8ce32937..000000000000
--- a/crypto/openssl/crypto/asn1/x_req.c
+++ /dev/null
@@ -1,112 +0,0 @@
-/* crypto/asn1/x_req.c */
-/* Copyright (C) 1995-1998 Eric Young (eay@cryptsoft.com)
- * All rights reserved.
- *
- * This package is an SSL implementation written
- * by Eric Young (eay@cryptsoft.com).
- * The implementation was written so as to conform with Netscapes SSL.
- * 
- * This library is free for commercial and non-commercial use as long as
- * the following conditions are aheared to.  The following conditions
- * apply to all code found in this distribution, be it the RC4, RSA,
- * lhash, DES, etc., code; not just the SSL code.  The SSL documentation
- * included with this distribution is covered by the same copyright terms
- * except that the holder is Tim Hudson (tjh@cryptsoft.com).
- * 
- * Copyright remains Eric Young's, and as such any Copyright notices in
- * the code are not to be removed.
- * If this package is used in a product, Eric Young should be given attribution
- * as the author of the parts of the library used.
- * This can be in the form of a textual message at program startup or
- * in documentation (online or textual) provided with the package.
- * 
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions
- * are met:
- * 1. Redistributions of source code must retain the copyright
- *    notice, this list of conditions and the following disclaimer.
- * 2. Redistributions in binary form must reproduce the above copyright
- *    notice, this list of conditions and the following disclaimer in the
- *    documentation and/or other materials provided with the distribution.
- * 3. All advertising materials mentioning features or use of this software
- *    must display the following acknowledgement:
- *    "This product includes cryptographic software written by
- *     Eric Young (eay@cryptsoft.com)"
- *    The word 'cryptographic' can be left out if the rouines from the library
- *    being used are not cryptographic related :-).
- * 4. If you include any Windows specific code (or a derivative thereof) from 
- *    the apps directory (application code) you must include an acknowledgement:
- *    "This product includes software written by Tim Hudson (tjh@cryptsoft.com)"
- * 
- * THIS SOFTWARE IS PROVIDED BY ERIC YOUNG ``AS IS'' AND
- * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
- * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
- * ARE DISCLAIMED.  IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE
- * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
- * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
- * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
- * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
- * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
- * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
- * SUCH DAMAGE.
- * 
- * The licence and distribution terms for any publically available version or
- * derivative of this code cannot be changed.  i.e. this code cannot simply be
- * copied and put under another distribution licence
- * [including the GNU Public Licence.]
- */
-
-#include <stdio.h>
-#include "cryptlib.h"
-#include <openssl/asn1t.h>
-#include <openssl/x509.h>
-
-/* X509_REQ_INFO is handled in an unusual way to get round
- * invalid encodings. Some broken certificate requests don't
- * encode the attributes field if it is empty. This is in
- * violation of PKCS#10 but we need to tolerate it. We do
- * this by making the attributes field OPTIONAL then using
- * the callback to initialise it to an empty STACK. 
- *
- * This means that the field will be correctly encoded unless
- * we NULL out the field.
- *
- * As a result we no longer need the req_kludge field because
- * the information is now contained in the attributes field:
- * 1. If it is NULL then it's the invalid omission.
- * 2. If it is empty it is the correct encoding.
- * 3. If it is not empty then some attributes are present.
- *
- */
-
-static int rinf_cb(int operation, ASN1_VALUE **pval, const ASN1_ITEM *it)
-{
-	X509_REQ_INFO *rinf = (X509_REQ_INFO *)*pval;
-
-	if(operation == ASN1_OP_NEW_POST) {
-		rinf->attributes = sk_X509_ATTRIBUTE_new_null();
-		if(!rinf->attributes) return 0;
-	}
-	return 1;
-}
-
-ASN1_SEQUENCE_enc(X509_REQ_INFO, enc, rinf_cb) = {
-	ASN1_SIMPLE(X509_REQ_INFO, version, ASN1_INTEGER),
-	ASN1_SIMPLE(X509_REQ_INFO, subject, X509_NAME),
-	ASN1_SIMPLE(X509_REQ_INFO, pubkey, X509_PUBKEY),
-	/* This isn't really OPTIONAL but it gets round invalid
-	 * encodings
-	 */
-	ASN1_IMP_SET_OF_OPT(X509_REQ_INFO, attributes, X509_ATTRIBUTE, 0)
-} ASN1_SEQUENCE_END_enc(X509_REQ_INFO, X509_REQ_INFO)
-
-IMPLEMENT_ASN1_FUNCTIONS(X509_REQ_INFO)
-
-ASN1_SEQUENCE_ref(X509_REQ, 0, CRYPTO_LOCK_X509_REQ) = {
-	ASN1_SIMPLE(X509_REQ, req_info, X509_REQ_INFO),
-	ASN1_SIMPLE(X509_REQ, sig_alg, X509_ALGOR),
-	ASN1_SIMPLE(X509_REQ, signature, ASN1_BIT_STRING)
-} ASN1_SEQUENCE_END_ref(X509_REQ, X509_REQ)
-
-IMPLEMENT_ASN1_FUNCTIONS(X509_REQ)
-IMPLEMENT_ASN1_DUP_FUNCTION(X509_REQ)
diff --git a/crypto/openssl/crypto/asn1/x_sig.c b/crypto/openssl/crypto/asn1/x_sig.c
deleted file mode 100644
index 42efa86c1cd9..000000000000
--- a/crypto/openssl/crypto/asn1/x_sig.c
+++ /dev/null
@@ -1,69 +0,0 @@
-/* crypto/asn1/x_sig.c */
-/* Copyright (C) 1995-1998 Eric Young (eay@cryptsoft.com)
- * All rights reserved.
- *
- * This package is an SSL implementation written
- * by Eric Young (eay@cryptsoft.com).
- * The implementation was written so as to conform with Netscapes SSL.
- * 
- * This library is free for commercial and non-commercial use as long as
- * the following conditions are aheared to.  The following conditions
- * apply to all code found in this distribution, be it the RC4, RSA,
- * lhash, DES, etc., code; not just the SSL code.  The SSL documentation
- * included with this distribution is covered by the same copyright terms
- * except that the holder is Tim Hudson (tjh@cryptsoft.com).
- * 
- * Copyright remains Eric Young's, and as such any Copyright notices in
- * the code are not to be removed.
- * If this package is used in a product, Eric Young should be given attribution
- * as the author of the parts of the library used.
- * This can be in the form of a textual message at program startup or
- * in documentation (online or textual) provided with the package.
- * 
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions
- * are met:
- * 1. Redistributions of source code must retain the copyright
- *    notice, this list of conditions and the following disclaimer.
- * 2. Redistributions in binary form must reproduce the above copyright
- *    notice, this list of conditions and the following disclaimer in the
- *    documentation and/or other materials provided with the distribution.
- * 3. All advertising materials mentioning features or use of this software
- *    must display the following acknowledgement:
- *    "This product includes cryptographic software written by
- *     Eric Young (eay@cryptsoft.com)"
- *    The word 'cryptographic' can be left out if the rouines from the library
- *    being used are not cryptographic related :-).
- * 4. If you include any Windows specific code (or a derivative thereof) from 
- *    the apps directory (application code) you must include an acknowledgement:
- *    "This product includes software written by Tim Hudson (tjh@cryptsoft.com)"
- * 
- * THIS SOFTWARE IS PROVIDED BY ERIC YOUNG ``AS IS'' AND
- * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
- * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
- * ARE DISCLAIMED.  IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE
- * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
- * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
- * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
- * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
- * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
- * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
- * SUCH DAMAGE.
- * 
- * The licence and distribution terms for any publically available version or
- * derivative of this code cannot be changed.  i.e. this code cannot simply be
- * copied and put under another distribution licence
- * [including the GNU Public Licence.]
- */
-
-#include <stdio.h>
-#include "cryptlib.h"
-#include <openssl/asn1t.h>
-#include <openssl/x509.h>
-
-ASN1_SEQUENCE(X509_SIG) = {
-	ASN1_SIMPLE(X509_SIG, algor, X509_ALGOR),
-	ASN1_SIMPLE(X509_SIG, digest, ASN1_OCTET_STRING)
-} ASN1_SEQUENCE_END(X509_SIG)
-
-IMPLEMENT_ASN1_FUNCTIONS(X509_SIG)
diff --git a/crypto/openssl/crypto/asn1/x_spki.c b/crypto/openssl/crypto/asn1/x_spki.c
deleted file mode 100644
index 2aece077c53a..000000000000
--- a/crypto/openssl/crypto/asn1/x_spki.c
+++ /dev/null
@@ -1,81 +0,0 @@
-/* crypto/asn1/x_spki.c */
-/* Copyright (C) 1995-1998 Eric Young (eay@cryptsoft.com)
- * All rights reserved.
- *
- * This package is an SSL implementation written
- * by Eric Young (eay@cryptsoft.com).
- * The implementation was written so as to conform with Netscapes SSL.
- * 
- * This library is free for commercial and non-commercial use as long as
- * the following conditions are aheared to.  The following conditions
- * apply to all code found in this distribution, be it the RC4, RSA,
- * lhash, DES, etc., code; not just the SSL code.  The SSL documentation
- * included with this distribution is covered by the same copyright terms
- * except that the holder is Tim Hudson (tjh@cryptsoft.com).
- * 
- * Copyright remains Eric Young's, and as such any Copyright notices in
- * the code are not to be removed.
- * If this package is used in a product, Eric Young should be given attribution
- * as the author of the parts of the library used.
- * This can be in the form of a textual message at program startup or
- * in documentation (online or textual) provided with the package.
- * 
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions
- * are met:
- * 1. Redistributions of source code must retain the copyright
- *    notice, this list of conditions and the following disclaimer.
- * 2. Redistributions in binary form must reproduce the above copyright
- *    notice, this list of conditions and the following disclaimer in the
- *    documentation and/or other materials provided with the distribution.
- * 3. All advertising materials mentioning features or use of this software
- *    must display the following acknowledgement:
- *    "This product includes cryptographic software written by
- *     Eric Young (eay@cryptsoft.com)"
- *    The word 'cryptographic' can be left out if the rouines from the library
- *    being used are not cryptographic related :-).
- * 4. If you include any Windows specific code (or a derivative thereof) from 
- *    the apps directory (application code) you must include an acknowledgement:
- *    "This product includes software written by Tim Hudson (tjh@cryptsoft.com)"
- * 
- * THIS SOFTWARE IS PROVIDED BY ERIC YOUNG ``AS IS'' AND
- * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
- * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
- * ARE DISCLAIMED.  IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE
- * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
- * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
- * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
- * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
- * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
- * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
- * SUCH DAMAGE.
- * 
- * The licence and distribution terms for any publically available version or
- * derivative of this code cannot be changed.  i.e. this code cannot simply be
- * copied and put under another distribution licence
- * [including the GNU Public Licence.]
- */
-
- /* This module was send to me my Pat Richards <patr@x509.com> who
-  * wrote it.  It is under my Copyright with his permission
-  */
-
-#include <stdio.h>
-#include "cryptlib.h"
-#include <openssl/x509.h>
-#include <openssl/asn1t.h>
-
-ASN1_SEQUENCE(NETSCAPE_SPKAC) = {
-	ASN1_SIMPLE(NETSCAPE_SPKAC, pubkey, X509_PUBKEY),
-	ASN1_SIMPLE(NETSCAPE_SPKAC, challenge, ASN1_IA5STRING)
-} ASN1_SEQUENCE_END(NETSCAPE_SPKAC)
-
-IMPLEMENT_ASN1_FUNCTIONS(NETSCAPE_SPKAC)
-
-ASN1_SEQUENCE(NETSCAPE_SPKI) = {
-	ASN1_SIMPLE(NETSCAPE_SPKI, spkac, NETSCAPE_SPKAC),
-	ASN1_SIMPLE(NETSCAPE_SPKI, sig_algor, X509_ALGOR),
-	ASN1_SIMPLE(NETSCAPE_SPKI, signature, ASN1_BIT_STRING)
-} ASN1_SEQUENCE_END(NETSCAPE_SPKI)
-
-IMPLEMENT_ASN1_FUNCTIONS(NETSCAPE_SPKI)
diff --git a/crypto/openssl/crypto/asn1/x_val.c b/crypto/openssl/crypto/asn1/x_val.c
deleted file mode 100644
index dc17c67758cb..000000000000
--- a/crypto/openssl/crypto/asn1/x_val.c
+++ /dev/null
@@ -1,69 +0,0 @@
-/* crypto/asn1/x_val.c */
-/* Copyright (C) 1995-1998 Eric Young (eay@cryptsoft.com)
- * All rights reserved.
- *
- * This package is an SSL implementation written
- * by Eric Young (eay@cryptsoft.com).
- * The implementation was written so as to conform with Netscapes SSL.
- * 
- * This library is free for commercial and non-commercial use as long as
- * the following conditions are aheared to.  The following conditions
- * apply to all code found in this distribution, be it the RC4, RSA,
- * lhash, DES, etc., code; not just the SSL code.  The SSL documentation
- * included with this distribution is covered by the same copyright terms
- * except that the holder is Tim Hudson (tjh@cryptsoft.com).
- * 
- * Copyright remains Eric Young's, and as such any Copyright notices in
- * the code are not to be removed.
- * If this package is used in a product, Eric Young should be given attribution
- * as the author of the parts of the library used.
- * This can be in the form of a textual message at program startup or
- * in documentation (online or textual) provided with the package.
- * 
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions
- * are met:
- * 1. Redistributions of source code must retain the copyright
- *    notice, this list of conditions and the following disclaimer.
- * 2. Redistributions in binary form must reproduce the above copyright
- *    notice, this list of conditions and the following disclaimer in the
- *    documentation and/or other materials provided with the distribution.
- * 3. All advertising materials mentioning features or use of this software
- *    must display the following acknowledgement:
- *    "This product includes cryptographic software written by
- *     Eric Young (eay@cryptsoft.com)"
- *    The word 'cryptographic' can be left out if the rouines from the library
- *    being used are not cryptographic related :-).
- * 4. If you include any Windows specific code (or a derivative thereof) from 
- *    the apps directory (application code) you must include an acknowledgement:
- *    "This product includes software written by Tim Hudson (tjh@cryptsoft.com)"
- * 
- * THIS SOFTWARE IS PROVIDED BY ERIC YOUNG ``AS IS'' AND
- * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
- * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
- * ARE DISCLAIMED.  IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE
- * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
- * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
- * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
- * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
- * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
- * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
- * SUCH DAMAGE.
- * 
- * The licence and distribution terms for any publically available version or
- * derivative of this code cannot be changed.  i.e. this code cannot simply be
- * copied and put under another distribution licence
- * [including the GNU Public Licence.]
- */
-
-#include <stdio.h>
-#include "cryptlib.h"
-#include <openssl/asn1t.h>
-#include <openssl/x509.h>
-
-ASN1_SEQUENCE(X509_VAL) = {
-	ASN1_SIMPLE(X509_VAL, notBefore, ASN1_TIME),
-	ASN1_SIMPLE(X509_VAL, notAfter, ASN1_TIME)
-} ASN1_SEQUENCE_END(X509_VAL)
-
-IMPLEMENT_ASN1_FUNCTIONS(X509_VAL)
diff --git a/crypto/openssl/crypto/asn1/x_x509.c b/crypto/openssl/crypto/asn1/x_x509.c
deleted file mode 100644
index e1186966258a..000000000000
--- a/crypto/openssl/crypto/asn1/x_x509.c
+++ /dev/null
@@ -1,202 +0,0 @@
-/* crypto/asn1/x_x509.c */
-/* Copyright (C) 1995-1998 Eric Young (eay@cryptsoft.com)
- * All rights reserved.
- *
- * This package is an SSL implementation written
- * by Eric Young (eay@cryptsoft.com).
- * The implementation was written so as to conform with Netscapes SSL.
- * 
- * This library is free for commercial and non-commercial use as long as
- * the following conditions are aheared to.  The following conditions
- * apply to all code found in this distribution, be it the RC4, RSA,
- * lhash, DES, etc., code; not just the SSL code.  The SSL documentation
- * included with this distribution is covered by the same copyright terms
- * except that the holder is Tim Hudson (tjh@cryptsoft.com).
- * 
- * Copyright remains Eric Young's, and as such any Copyright notices in
- * the code are not to be removed.
- * If this package is used in a product, Eric Young should be given attribution
- * as the author of the parts of the library used.
- * This can be in the form of a textual message at program startup or
- * in documentation (online or textual) provided with the package.
- * 
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions
- * are met:
- * 1. Redistributions of source code must retain the copyright
- *    notice, this list of conditions and the following disclaimer.
- * 2. Redistributions in binary form must reproduce the above copyright
- *    notice, this list of conditions and the following disclaimer in the
- *    documentation and/or other materials provided with the distribution.
- * 3. All advertising materials mentioning features or use of this software
- *    must display the following acknowledgement:
- *    "This product includes cryptographic software written by
- *     Eric Young (eay@cryptsoft.com)"
- *    The word 'cryptographic' can be left out if the rouines from the library
- *    being used are not cryptographic related :-).
- * 4. If you include any Windows specific code (or a derivative thereof) from 
- *    the apps directory (application code) you must include an acknowledgement:
- *    "This product includes software written by Tim Hudson (tjh@cryptsoft.com)"
- * 
- * THIS SOFTWARE IS PROVIDED BY ERIC YOUNG ``AS IS'' AND
- * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
- * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
- * ARE DISCLAIMED.  IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE
- * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
- * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
- * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
- * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
- * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
- * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
- * SUCH DAMAGE.
- * 
- * The licence and distribution terms for any publically available version or
- * derivative of this code cannot be changed.  i.e. this code cannot simply be
- * copied and put under another distribution licence
- * [including the GNU Public Licence.]
- */
-
-#include <stdio.h>
-#include "cryptlib.h"
-#include <openssl/evp.h>
-#include <openssl/asn1t.h>
-#include <openssl/x509.h>
-#include <openssl/x509v3.h>
-
-ASN1_SEQUENCE(X509_CINF) = {
-	ASN1_EXP_OPT(X509_CINF, version, ASN1_INTEGER, 0),
-	ASN1_SIMPLE(X509_CINF, serialNumber, ASN1_INTEGER),
-	ASN1_SIMPLE(X509_CINF, signature, X509_ALGOR),
-	ASN1_SIMPLE(X509_CINF, issuer, X509_NAME),
-	ASN1_SIMPLE(X509_CINF, validity, X509_VAL),
-	ASN1_SIMPLE(X509_CINF, subject, X509_NAME),
-	ASN1_SIMPLE(X509_CINF, key, X509_PUBKEY),
-	ASN1_IMP_OPT(X509_CINF, issuerUID, ASN1_BIT_STRING, 1),
-	ASN1_IMP_OPT(X509_CINF, subjectUID, ASN1_BIT_STRING, 2),
-	ASN1_EXP_SEQUENCE_OF_OPT(X509_CINF, extensions, X509_EXTENSION, 3)
-} ASN1_SEQUENCE_END(X509_CINF)
-
-IMPLEMENT_ASN1_FUNCTIONS(X509_CINF)
-/* X509 top level structure needs a bit of customisation */
-
-extern void policy_cache_free(X509_POLICY_CACHE *cache);
-
-static int x509_cb(int operation, ASN1_VALUE **pval, const ASN1_ITEM *it)
-{
-	X509 *ret = (X509 *)*pval;
-
-	switch(operation) {
-
-		case ASN1_OP_NEW_POST:
-		ret->valid=0;
-		ret->name = NULL;
-		ret->ex_flags = 0;
-		ret->ex_pathlen = -1;
-		ret->skid = NULL;
-		ret->akid = NULL;
-#ifndef OPENSSL_NO_RFC3779
-		ret->rfc3779_addr = NULL;
-		ret->rfc3779_asid = NULL;
-#endif
-		ret->aux = NULL;
-		CRYPTO_new_ex_data(CRYPTO_EX_INDEX_X509, ret, &ret->ex_data);
-		break;
-
-		case ASN1_OP_D2I_POST:
-		if (ret->name != NULL) OPENSSL_free(ret->name);
-		ret->name=X509_NAME_oneline(ret->cert_info->subject,NULL,0);
-		break;
-
-		case ASN1_OP_FREE_POST:
-		CRYPTO_free_ex_data(CRYPTO_EX_INDEX_X509, ret, &ret->ex_data);
-		X509_CERT_AUX_free(ret->aux);
-		ASN1_OCTET_STRING_free(ret->skid);
-		AUTHORITY_KEYID_free(ret->akid);
-		policy_cache_free(ret->policy_cache);
-#ifndef OPENSSL_NO_RFC3779
-		sk_IPAddressFamily_pop_free(ret->rfc3779_addr, IPAddressFamily_free);
-		ASIdentifiers_free(ret->rfc3779_asid);
-#endif
-
-		if (ret->name != NULL) OPENSSL_free(ret->name);
-		break;
-
-	}
-
-	return 1;
-
-}
-
-ASN1_SEQUENCE_ref(X509, x509_cb, CRYPTO_LOCK_X509) = {
-	ASN1_SIMPLE(X509, cert_info, X509_CINF),
-	ASN1_SIMPLE(X509, sig_alg, X509_ALGOR),
-	ASN1_SIMPLE(X509, signature, ASN1_BIT_STRING)
-} ASN1_SEQUENCE_END_ref(X509, X509)
-
-IMPLEMENT_ASN1_FUNCTIONS(X509)
-IMPLEMENT_ASN1_DUP_FUNCTION(X509)
-
-static ASN1_METHOD meth=
-    {
-    (I2D_OF(void))  i2d_X509,
-    (D2I_OF(void)) d2i_X509,
-    (void *(*)(void))X509_new,
-    (void (*)(void *)) X509_free
-    };
-
-ASN1_METHOD *X509_asn1_meth(void)
-	{
-	return(&meth);
-	}
-
-int X509_get_ex_new_index(long argl, void *argp, CRYPTO_EX_new *new_func,
-	     CRYPTO_EX_dup *dup_func, CRYPTO_EX_free *free_func)
-        {
-	return CRYPTO_get_ex_new_index(CRYPTO_EX_INDEX_X509, argl, argp,
-				new_func, dup_func, free_func);
-        }
-
-int X509_set_ex_data(X509 *r, int idx, void *arg)
-	{
-	return(CRYPTO_set_ex_data(&r->ex_data,idx,arg));
-	}
-
-void *X509_get_ex_data(X509 *r, int idx)
-	{
-	return(CRYPTO_get_ex_data(&r->ex_data,idx));
-	}
-
-/* X509_AUX ASN1 routines. X509_AUX is the name given to
- * a certificate with extra info tagged on the end. Since these
- * functions set how a certificate is trusted they should only
- * be used when the certificate comes from a reliable source
- * such as local storage.
- *
- */
-
-X509 *d2i_X509_AUX(X509 **a, const unsigned char **pp, long length)
-{
-	const unsigned char *q;
-	X509 *ret;
-	/* Save start position */
-	q = *pp;
-	ret = d2i_X509(a, pp, length);
-	/* If certificate unreadable then forget it */
-	if(!ret) return NULL;
-	/* update length */
-	length -= *pp - q;
-	if(!length) return ret;
-	if(!d2i_X509_CERT_AUX(&ret->aux, pp, length)) goto err;
-	return ret;
-	err:
-	X509_free(ret);
-	return NULL;
-}
-
-int i2d_X509_AUX(X509 *a, unsigned char **pp)
-{
-	int length;
-	length = i2d_X509(a, pp);
-	if(a) length += i2d_X509_CERT_AUX(a->aux, pp);
-	return length;
-}
diff --git a/crypto/openssl/crypto/asn1/x_x509a.c b/crypto/openssl/crypto/asn1/x_x509a.c
deleted file mode 100644
index 13db5fd03fda..000000000000
--- a/crypto/openssl/crypto/asn1/x_x509a.c
+++ /dev/null
@@ -1,180 +0,0 @@
-/* a_x509a.c */
-/* Written by Dr Stephen N Henson (shenson@bigfoot.com) for the OpenSSL
- * project 1999.
- */
-/* ====================================================================
- * Copyright (c) 1999 The OpenSSL Project.  All rights reserved.
- *
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions
- * are met:
- *
- * 1. Redistributions of source code must retain the above copyright
- *    notice, this list of conditions and the following disclaimer. 
- *
- * 2. Redistributions in binary form must reproduce the above copyright
- *    notice, this list of conditions and the following disclaimer in
- *    the documentation and/or other materials provided with the
- *    distribution.
- *
- * 3. All advertising materials mentioning features or use of this
- *    software must display the following acknowledgment:
- *    "This product includes software developed by the OpenSSL Project
- *    for use in the OpenSSL Toolkit. (http://www.OpenSSL.org/)"
- *
- * 4. The names "OpenSSL Toolkit" and "OpenSSL Project" must not be used to
- *    endorse or promote products derived from this software without
- *    prior written permission. For written permission, please contact
- *    licensing@OpenSSL.org.
- *
- * 5. Products derived from this software may not be called "OpenSSL"
- *    nor may "OpenSSL" appear in their names without prior written
- *    permission of the OpenSSL Project.
- *
- * 6. Redistributions of any form whatsoever must retain the following
- *    acknowledgment:
- *    "This product includes software developed by the OpenSSL Project
- *    for use in the OpenSSL Toolkit (http://www.OpenSSL.org/)"
- *
- * THIS SOFTWARE IS PROVIDED BY THE OpenSSL PROJECT ``AS IS'' AND ANY
- * EXPRESSED OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
- * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR
- * PURPOSE ARE DISCLAIMED.  IN NO EVENT SHALL THE OpenSSL PROJECT OR
- * ITS CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
- * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
- * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
- * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
- * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
- * STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
- * ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED
- * OF THE POSSIBILITY OF SUCH DAMAGE.
- * ====================================================================
- *
- * This product includes cryptographic software written by Eric Young
- * (eay@cryptsoft.com).  This product includes software written by Tim
- * Hudson (tjh@cryptsoft.com).
- *
- */
-
-#include <stdio.h>
-#include "cryptlib.h"
-#include <openssl/evp.h>
-#include <openssl/asn1t.h>
-#include <openssl/x509.h>
-
-/* X509_CERT_AUX routines. These are used to encode additional
- * user modifiable data about a certificate. This data is
- * appended to the X509 encoding when the *_X509_AUX routines
- * are used. This means that the "traditional" X509 routines
- * will simply ignore the extra data. 
- */
-
-static X509_CERT_AUX *aux_get(X509 *x);
-
-ASN1_SEQUENCE(X509_CERT_AUX) = {
-	ASN1_SEQUENCE_OF_OPT(X509_CERT_AUX, trust, ASN1_OBJECT),
-	ASN1_IMP_SEQUENCE_OF_OPT(X509_CERT_AUX, reject, ASN1_OBJECT, 0),
-	ASN1_OPT(X509_CERT_AUX, alias, ASN1_UTF8STRING),
-	ASN1_OPT(X509_CERT_AUX, keyid, ASN1_OCTET_STRING),
-	ASN1_IMP_SEQUENCE_OF_OPT(X509_CERT_AUX, other, X509_ALGOR, 1)
-} ASN1_SEQUENCE_END(X509_CERT_AUX)
-
-IMPLEMENT_ASN1_FUNCTIONS(X509_CERT_AUX)
-
-static X509_CERT_AUX *aux_get(X509 *x)
-{
-	if(!x) return NULL;
-	if(!x->aux && !(x->aux = X509_CERT_AUX_new())) return NULL;
-	return x->aux;
-}
-
-int X509_alias_set1(X509 *x, unsigned char *name, int len)
-{
-	X509_CERT_AUX *aux;
-	if (!name)
-		{
-		if (!x || !x->aux || !x->aux->alias)
-			return 1;
-		ASN1_UTF8STRING_free(x->aux->alias);
-		x->aux->alias = NULL;
-		return 1;
-		}
-	if(!(aux = aux_get(x))) return 0;
-	if(!aux->alias && !(aux->alias = ASN1_UTF8STRING_new())) return 0;
-	return ASN1_STRING_set(aux->alias, name, len);
-}
-
-int X509_keyid_set1(X509 *x, unsigned char *id, int len)
-{
-	X509_CERT_AUX *aux;
-	if (!id)
-		{
-		if (!x || !x->aux || !x->aux->keyid)
-			return 1;
-		ASN1_OCTET_STRING_free(x->aux->keyid);
-		x->aux->keyid = NULL;
-		return 1;
-		}
-	if(!(aux = aux_get(x))) return 0;
-	if(!aux->keyid && !(aux->keyid = ASN1_OCTET_STRING_new())) return 0;
-	return ASN1_STRING_set(aux->keyid, id, len);
-}
-
-unsigned char *X509_alias_get0(X509 *x, int *len)
-{
-	if(!x->aux || !x->aux->alias) return NULL;
-	if(len) *len = x->aux->alias->length;
-	return x->aux->alias->data;
-}
-
-unsigned char *X509_keyid_get0(X509 *x, int *len)
-{
-	if(!x->aux || !x->aux->keyid) return NULL;
-	if(len) *len = x->aux->keyid->length;
-	return x->aux->keyid->data;
-}
-
-int X509_add1_trust_object(X509 *x, ASN1_OBJECT *obj)
-{
-	X509_CERT_AUX *aux;
-	ASN1_OBJECT *objtmp;
-	if(!(objtmp = OBJ_dup(obj))) return 0;
-	if(!(aux = aux_get(x))) return 0;
-	if(!aux->trust
-		&& !(aux->trust = sk_ASN1_OBJECT_new_null())) return 0;
-	return sk_ASN1_OBJECT_push(aux->trust, objtmp);
-}
-
-int X509_add1_reject_object(X509 *x, ASN1_OBJECT *obj)
-{
-	X509_CERT_AUX *aux;
-	ASN1_OBJECT *objtmp;
-	if(!(objtmp = OBJ_dup(obj))) return 0;
-	if(!(aux = aux_get(x))) return 0;
-	if(!aux->reject
-		&& !(aux->reject = sk_ASN1_OBJECT_new_null())) return 0;
-	return sk_ASN1_OBJECT_push(aux->reject, objtmp);
-}
-
-void X509_trust_clear(X509 *x)
-{
-	if(x->aux && x->aux->trust) {
-		sk_ASN1_OBJECT_pop_free(x->aux->trust, ASN1_OBJECT_free);
-		x->aux->trust = NULL;
-	}
-}
-
-void X509_reject_clear(X509 *x)
-{
-	if(x->aux && x->aux->reject) {
-		sk_ASN1_OBJECT_pop_free(x->aux->reject, ASN1_OBJECT_free);
-		x->aux->reject = NULL;
-	}
-}
-
-ASN1_SEQUENCE(X509_CERT_PAIR) = {
-	ASN1_EXP_OPT(X509_CERT_PAIR, forward, X509, 0),
-	ASN1_EXP_OPT(X509_CERT_PAIR, reverse, X509, 1)
-} ASN1_SEQUENCE_END(X509_CERT_PAIR)
-
-IMPLEMENT_ASN1_FUNCTIONS(X509_CERT_PAIR)
diff --git a/crypto/openssl/crypto/bf/COPYRIGHT b/crypto/openssl/crypto/bf/COPYRIGHT
deleted file mode 100644
index 6857223506de..000000000000
--- a/crypto/openssl/crypto/bf/COPYRIGHT
+++ /dev/null
@@ -1,46 +0,0 @@
-Copyright (C) 1995-1997 Eric Young (eay@cryptsoft.com)
-All rights reserved.
-
-This package is an Blowfish implementation written
-by Eric Young (eay@cryptsoft.com).
-
-This library is free for commercial and non-commercial use as long as
-the following conditions are aheared to.  The following conditions
-apply to all code found in this distribution.
-
-Copyright remains Eric Young's, and as such any Copyright notices in
-the code are not to be removed.
-
-Redistribution and use in source and binary forms, with or without
-modification, are permitted provided that the following conditions
-are met:
-1. Redistributions of source code must retain the copyright
-   notice, this list of conditions and the following disclaimer.
-2. Redistributions in binary form must reproduce the above copyright
-   notice, this list of conditions and the following disclaimer in the
-   documentation and/or other materials provided with the distribution.
-3. All advertising materials mentioning features or use of this software
-   must display the following acknowledgement:
-   This product includes software developed by Eric Young (eay@cryptsoft.com)
-
-THIS SOFTWARE IS PROVIDED BY ERIC YOUNG ``AS IS'' AND
-ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
-IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
-ARE DISCLAIMED.  IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE
-FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
-DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
-OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
-HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
-LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
-OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
-SUCH DAMAGE.
-
-The license and distribution terms for any publically available version or
-derivative of this code cannot be changed.  i.e. this code cannot simply be
-copied and put under another distrubution license
-[including the GNU Public License.]
-
-The reason behind this being stated in this direct manner is past
-experience in code simply being copied and the attribution removed
-from it and then being distributed as part of other packages. This
-implementation was a non-trivial and unpaid effort.
diff --git a/crypto/openssl/crypto/bf/INSTALL b/crypto/openssl/crypto/bf/INSTALL
deleted file mode 100644
index 3b259235326a..000000000000
--- a/crypto/openssl/crypto/bf/INSTALL
+++ /dev/null
@@ -1,14 +0,0 @@
-This Eric Young's blowfish implementation, taken from his SSLeay library
-and made available as a separate library.
- 
-The version number (0.7.2m) is the SSLeay version that this library was
-taken from.
- 
-To build, just unpack and type make.
-If you are not using gcc, edit the Makefile.
-If you are compiling for an x86 box, try the assembler (it needs improving).
-There are also some compile time options that can improve performance,
-these are documented in the Makefile.
- 
-eric 15-Apr-1997
- 
diff --git a/crypto/openssl/crypto/bf/Makefile b/crypto/openssl/crypto/bf/Makefile
deleted file mode 100644
index 8441954a8d95..000000000000
--- a/crypto/openssl/crypto/bf/Makefile
+++ /dev/null
@@ -1,107 +0,0 @@
-#
-# OpenSSL/crypto/blowfish/Makefile
-#
-
-DIR=	bf
-TOP=	../..
-CC=	cc
-CPP=	$(CC) -E
-INCLUDES=
-CFLAG=-g
-MAKEFILE=	Makefile
-AR=		ar r
-
-BF_ENC=		bf_enc.o
-# or use
-#DES_ENC=	bx86-elf.o
-
-CFLAGS= $(INCLUDES) $(CFLAG)
-ASFLAGS= $(INCLUDES) $(ASFLAG)
-AFLAGS= $(ASFLAGS)
-
-GENERAL=Makefile
-TEST=bftest.c
-APPS=
-
-LIB=$(TOP)/libcrypto.a
-LIBSRC=bf_skey.c bf_ecb.c bf_enc.c bf_cfb64.c bf_ofb64.c 
-LIBOBJ=bf_skey.o bf_ecb.o $(BF_ENC) bf_cfb64.o bf_ofb64.o
-
-SRC= $(LIBSRC)
-
-EXHEADER= blowfish.h
-HEADER=	bf_pi.h bf_locl.h $(EXHEADER)
-
-ALL=    $(GENERAL) $(SRC) $(HEADER)
-
-top:
-	(cd ../..; $(MAKE) DIRS=crypto SDIRS=$(DIR) sub_all)
-
-all:	lib
-
-lib:	$(LIBOBJ)
-	$(AR) $(LIB) $(LIBOBJ)
-	$(RANLIB) $(LIB) || echo Never mind.
-	@touch lib
-
-# ELF
-bx86-elf.s: asm/bf-586.pl ../perlasm/x86asm.pl ../perlasm/cbc.pl
-	(cd asm; $(PERL) bf-586.pl elf $(CFLAGS) $(PROCESSOR) > ../$@)
-# COFF
-bx86-cof.s: asm/bf-586.pl ../perlasm/x86asm.pl ../perlasm/cbc.pl
-	(cd asm; $(PERL) bf-586.pl coff $(CFLAGS) $(PROCESSOR) > ../$@)
-# a.out
-bx86-out.s: asm/bf-586.pl ../perlasm/x86asm.pl ../perlasm/cbc.pl
-	(cd asm; $(PERL) bf-586.pl a.out $(CFLAGS) $(PROCESSOR) > ../$@)
-
-files:
-	$(PERL) $(TOP)/util/files.pl Makefile >> $(TOP)/MINFO
-
-links:
-	@$(PERL) $(TOP)/util/mklink.pl ../../include/openssl $(EXHEADER)
-	@$(PERL) $(TOP)/util/mklink.pl ../../test $(TEST)
-	@$(PERL) $(TOP)/util/mklink.pl ../../apps $(APPS)
-
-# We need to use force because 'install' matches 'INSTALL' on case
-# insensitive systems
-FRC.install:
-install: FRC.install
-	@[ -n "$(INSTALLTOP)" ] # should be set by top Makefile...
-	@headerlist="$(EXHEADER)"; for i in $$headerlist ; \
-	do  \
-	(cp $$i $(INSTALL_PREFIX)$(INSTALLTOP)/include/openssl/$$i; \
-	chmod 644 $(INSTALL_PREFIX)$(INSTALLTOP)/include/openssl/$$i ); \
-	done;
-
-tags:
-	ctags $(SRC)
-
-tests:
-
-lint:
-	lint -DLINT $(INCLUDES) $(SRC)>fluff
-
-depend:
-	@[ -n "$(MAKEDEPEND)" ] # should be set by upper Makefile...
-	$(MAKEDEPEND) -- $(CFLAG) $(INCLUDES) $(DEPFLAG) -- $(PROGS) $(LIBSRC)
-
-dclean:
-	$(PERL) -pe 'if (/^# DO NOT DELETE THIS LINE/) {print; exit(0);}' $(MAKEFILE) >Makefile.new
-	mv -f Makefile.new $(MAKEFILE)
-
-clean:
-	rm -f *.s *.o *.obj lib tags core .pure .nfs* *.old *.bak fluff
-
-# DO NOT DELETE THIS LINE -- make depend depends on it.
-
-bf_cfb64.o: ../../include/openssl/blowfish.h ../../include/openssl/e_os2.h
-bf_cfb64.o: ../../include/openssl/opensslconf.h bf_cfb64.c bf_locl.h
-bf_ecb.o: ../../include/openssl/blowfish.h ../../include/openssl/e_os2.h
-bf_ecb.o: ../../include/openssl/opensslconf.h ../../include/openssl/opensslv.h
-bf_ecb.o: bf_ecb.c bf_locl.h
-bf_enc.o: ../../include/openssl/blowfish.h ../../include/openssl/e_os2.h
-bf_enc.o: ../../include/openssl/opensslconf.h bf_enc.c bf_locl.h
-bf_ofb64.o: ../../include/openssl/blowfish.h ../../include/openssl/e_os2.h
-bf_ofb64.o: ../../include/openssl/opensslconf.h bf_locl.h bf_ofb64.c
-bf_skey.o: ../../include/openssl/blowfish.h ../../include/openssl/e_os2.h
-bf_skey.o: ../../include/openssl/opensslconf.h bf_locl.h bf_pi.h bf_skey.c
diff --git a/crypto/openssl/crypto/bf/README b/crypto/openssl/crypto/bf/README
deleted file mode 100644
index f2712fd0e7df..000000000000
--- a/crypto/openssl/crypto/bf/README
+++ /dev/null
@@ -1,8 +0,0 @@
-This is a quick packaging up of my blowfish code into a library.
-It has been lifted from SSLeay.
-The copyright notices seem a little harsh because I have not spent the
-time to rewrite the conditions from the normal SSLeay ones.
-
-Basically if you just want to play with the library, not a problem.
-
-eric 15-Apr-1997
diff --git a/crypto/openssl/crypto/bf/VERSION b/crypto/openssl/crypto/bf/VERSION
deleted file mode 100644
index be995855e43b..000000000000
--- a/crypto/openssl/crypto/bf/VERSION
+++ /dev/null
@@ -1,6 +0,0 @@
-The version numbers will follow my SSL implementation
-
-0.7.2r - Some reasonable default compiler options from 
-	Peter Gutman <pgut001@cs.auckland.ac.nz>
-
-0.7.2m - the first release
diff --git a/crypto/openssl/crypto/bf/asm/bf-586.pl b/crypto/openssl/crypto/bf/asm/bf-586.pl
deleted file mode 100644
index b556642c949a..000000000000
--- a/crypto/openssl/crypto/bf/asm/bf-586.pl
+++ /dev/null
@@ -1,136 +0,0 @@
-#!/usr/local/bin/perl
-
-push(@INC,"perlasm","../../perlasm");
-require "x86asm.pl";
-require "cbc.pl";
-
-&asm_init($ARGV[0],"bf-586.pl",$ARGV[$#ARGV] eq "386");
-
-$BF_ROUNDS=16;
-$BF_OFF=($BF_ROUNDS+2)*4;
-$L="edi";
-$R="esi";
-$P="ebp";
-$tmp1="eax";
-$tmp2="ebx";
-$tmp3="ecx";
-$tmp4="edx";
-
-&BF_encrypt("BF_encrypt",1);
-&BF_encrypt("BF_decrypt",0);
-&cbc("BF_cbc_encrypt","BF_encrypt","BF_decrypt",1,4,5,3,-1,-1);
-&asm_finish();
-
-sub BF_encrypt
-	{
-	local($name,$enc)=@_;
-
-	&function_begin_B($name,"");
-
-	&comment("");
-
-	&push("ebp");
-	&push("ebx");
-	&mov($tmp2,&wparam(0));
-	&mov($P,&wparam(1));
-	&push("esi");
-	&push("edi");
-
-	&comment("Load the 2 words");
-	&mov($L,&DWP(0,$tmp2,"",0));
-	&mov($R,&DWP(4,$tmp2,"",0));
-
-	&xor(	$tmp1,	$tmp1);
-
-	# encrypting part
-
-	if ($enc)
-		{
-		 &mov($tmp2,&DWP(0,$P,"",0));
-		&xor(	$tmp3,	$tmp3);
-
-		&xor($L,$tmp2);
-		for ($i=0; $i<$BF_ROUNDS; $i+=2)
-			{
-			&comment("");
-			&comment("Round $i");
-			&BF_ENCRYPT($i+1,$R,$L,$P,$tmp1,$tmp2,$tmp3,$tmp4,1);
-
-			&comment("");
-			&comment("Round ".sprintf("%d",$i+1));
-			&BF_ENCRYPT($i+2,$L,$R,$P,$tmp1,$tmp2,$tmp3,$tmp4,1);
-			}
-		# &mov($tmp1,&wparam(0)); In last loop
-		&mov($tmp4,&DWP(($BF_ROUNDS+1)*4,$P,"",0));
-		}
-	else
-		{
-		 &mov($tmp2,&DWP(($BF_ROUNDS+1)*4,$P,"",0));
-		&xor(	$tmp3,	$tmp3);
-
-		&xor($L,$tmp2);
-		for ($i=$BF_ROUNDS; $i>0; $i-=2)
-			{
-			&comment("");
-			&comment("Round $i");
-			&BF_ENCRYPT($i,$R,$L,$P,$tmp1,$tmp2,$tmp3,$tmp4,0);
-			&comment("");
-			&comment("Round ".sprintf("%d",$i-1));
-			&BF_ENCRYPT($i-1,$L,$R,$P,$tmp1,$tmp2,$tmp3,$tmp4,0);
-			}
-		# &mov($tmp1,&wparam(0)); In last loop
-		&mov($tmp4,&DWP(0,$P,"",0));
-		}
-
-	&xor($R,$tmp4);
-	&mov(&DWP(4,$tmp1,"",0),$L);
-
-	&mov(&DWP(0,$tmp1,"",0),$R);
-	&function_end($name);
-	}
-
-sub BF_ENCRYPT
-	{
-	local($i,$L,$R,$P,$tmp1,$tmp2,$tmp3,$tmp4,$enc)=@_;
-
-	&mov(	$tmp4,		&DWP(&n2a($i*4),$P,"",0)); # for next round
-
-	&mov(	$tmp2,		$R);
-	&xor(	$L,		$tmp4);
-
-	&shr(	$tmp2,		16);
-	&mov(	$tmp4,		$R);
-
-	&movb(	&LB($tmp1),	&HB($tmp2));	# A
-	&and(	$tmp2,		0xff);		# B
-
-	&movb(	&LB($tmp3),	&HB($tmp4));	# C
-	&and(	$tmp4,		0xff);		# D
-
-	&mov(	$tmp1,		&DWP(&n2a($BF_OFF+0x0000),$P,$tmp1,4));
-	&mov(	$tmp2,		&DWP(&n2a($BF_OFF+0x0400),$P,$tmp2,4));
-
-	&add(	$tmp2,		$tmp1);
-	&mov(	$tmp1,		&DWP(&n2a($BF_OFF+0x0800),$P,$tmp3,4));
-
-	&xor(	$tmp2,		$tmp1);
-	&mov(	$tmp4,		&DWP(&n2a($BF_OFF+0x0C00),$P,$tmp4,4));
-
-	&add(	$tmp2,		$tmp4);
-	if (($enc && ($i != 16)) || ((!$enc) && ($i != 1)))
-		{ &xor(	$tmp1,		$tmp1); }
-	else
-		{
-		&comment("Load parameter 0 ($i) enc=$enc");
-		&mov($tmp1,&wparam(0));
-		} # In last loop
-
-	&xor(	$L,		$tmp2);
-	# delay
-	}
-
-sub n2a
-	{
-	sprintf("%d",$_[0]);
-	}
-
diff --git a/crypto/openssl/crypto/bf/asm/bf-686.pl b/crypto/openssl/crypto/bf/asm/bf-686.pl
deleted file mode 100644
index 8e4c25f59847..000000000000
--- a/crypto/openssl/crypto/bf/asm/bf-686.pl
+++ /dev/null
@@ -1,127 +0,0 @@
-#!/usr/local/bin/perl
-
-push(@INC,"perlasm","../../perlasm");
-require "x86asm.pl";
-require "cbc.pl";
-
-&asm_init($ARGV[0],"bf-686.pl");
-
-$BF_ROUNDS=16;
-$BF_OFF=($BF_ROUNDS+2)*4;
-$L="ecx";
-$R="edx";
-$P="edi";
-$tot="esi";
-$tmp1="eax";
-$tmp2="ebx";
-$tmp3="ebp";
-
-&des_encrypt("BF_encrypt",1);
-&des_encrypt("BF_decrypt",0);
-&cbc("BF_cbc_encrypt","BF_encrypt","BF_decrypt",1,4,5,3,-1,-1);
-
-&asm_finish();
-
-&file_end();
-
-sub des_encrypt
-	{
-	local($name,$enc)=@_;
-
-	&function_begin($name,"");
-
-	&comment("");
-	&comment("Load the 2 words");
-	&mov("eax",&wparam(0));
-	&mov($L,&DWP(0,"eax","",0));
-	&mov($R,&DWP(4,"eax","",0));
-
-	&comment("");
-	&comment("P pointer, s and enc flag");
-	&mov($P,&wparam(1));
-
-	&xor(	$tmp1,	$tmp1);
-	&xor(	$tmp2,	$tmp2);
-
-	# encrypting part
-
-	if ($enc)
-		{
-		&xor($L,&DWP(0,$P,"",0));
-		for ($i=0; $i<$BF_ROUNDS; $i+=2)
-			{
-			&comment("");
-			&comment("Round $i");
-			&BF_ENCRYPT($i+1,$R,$L,$P,$tot,$tmp1,$tmp2,$tmp3);
-
-			&comment("");
-			&comment("Round ".sprintf("%d",$i+1));
-			&BF_ENCRYPT($i+2,$L,$R,$P,$tot,$tmp1,$tmp2,$tmp3);
-			}
-		&xor($R,&DWP(($BF_ROUNDS+1)*4,$P,"",0));
-
-		&mov("eax",&wparam(0));
-		&mov(&DWP(0,"eax","",0),$R);
-		&mov(&DWP(4,"eax","",0),$L);
-		&function_end_A($name);
-		}
-	else
-		{
-		&xor($L,&DWP(($BF_ROUNDS+1)*4,$P,"",0));
-		for ($i=$BF_ROUNDS; $i>0; $i-=2)
-			{
-			&comment("");
-			&comment("Round $i");
-			&BF_ENCRYPT($i,$R,$L,$P,$tot,$tmp1,$tmp2,$tmp3);
-			&comment("");
-			&comment("Round ".sprintf("%d",$i-1));
-			&BF_ENCRYPT($i-1,$L,$R,$P,$tot,$tmp1,$tmp2,$tmp3);
-			}
-		&xor($R,&DWP(0,$P,"",0));
-
-		&mov("eax",&wparam(0));
-		&mov(&DWP(0,"eax","",0),$R);
-		&mov(&DWP(4,"eax","",0),$L);
-		&function_end_A($name);
-		}
-
-	&function_end_B($name);
-	}
-
-sub BF_ENCRYPT
-	{
-	local($i,$L,$R,$P,$tot,$tmp1,$tmp2,$tmp3)=@_;
-
-	&rotr(	$R,		16);
-	&mov(	$tot,		&DWP(&n2a($i*4),$P,"",0));
-
-	&movb(	&LB($tmp1),	&HB($R));
-	&movb(	&LB($tmp2),	&LB($R));
-
-	&rotr(	$R,		16);
-	&xor(	$L,		$tot);
-
-	&mov(	$tot,		&DWP(&n2a($BF_OFF+0x0000),$P,$tmp1,4));
-	&mov(	$tmp3,		&DWP(&n2a($BF_OFF+0x0400),$P,$tmp2,4));
-
-	&movb(	&LB($tmp1),	&HB($R));
-	&movb(	&LB($tmp2),	&LB($R));
-
-	&add(	$tot,		$tmp3);
-	&mov(	$tmp1,		&DWP(&n2a($BF_OFF+0x0800),$P,$tmp1,4)); # delay
-
-	&xor(	$tot,		$tmp1);
-	&mov(	$tmp3,		&DWP(&n2a($BF_OFF+0x0C00),$P,$tmp2,4));
-
-	&add(	$tot,		$tmp3);
-	&xor(	$tmp1,		$tmp1);
-
-	&xor(	$L,		$tot);					
-	# delay
-	}
-
-sub n2a
-	{
-	sprintf("%d",$_[0]);
-	}
-
diff --git a/crypto/openssl/crypto/bf/asm/readme b/crypto/openssl/crypto/bf/asm/readme
deleted file mode 100644
index 2385fa3812cf..000000000000
--- a/crypto/openssl/crypto/bf/asm/readme
+++ /dev/null
@@ -1,10 +0,0 @@
-There are blowfish assembler generation scripts.
-bf-586.pl version is for the pentium and
-bf-686.pl is my original version, which is faster on the pentium pro.
-
-When using a bf-586.pl, the pentium pro/II is %8 slower than using
-bf-686.pl.  When using a bf-686.pl, the pentium is %16 slower
-than bf-586.pl
-
-So the default is bf-586.pl
-
diff --git a/crypto/openssl/crypto/bf/bf_cbc.c b/crypto/openssl/crypto/bf/bf_cbc.c
deleted file mode 100644
index f949629dc676..000000000000
--- a/crypto/openssl/crypto/bf/bf_cbc.c
+++ /dev/null
@@ -1,143 +0,0 @@
-/* crypto/bf/bf_cbc.c */
-/* Copyright (C) 1995-1998 Eric Young (eay@cryptsoft.com)
- * All rights reserved.
- *
- * This package is an SSL implementation written
- * by Eric Young (eay@cryptsoft.com).
- * The implementation was written so as to conform with Netscapes SSL.
- * 
- * This library is free for commercial and non-commercial use as long as
- * the following conditions are aheared to.  The following conditions
- * apply to all code found in this distribution, be it the RC4, RSA,
- * lhash, DES, etc., code; not just the SSL code.  The SSL documentation
- * included with this distribution is covered by the same copyright terms
- * except that the holder is Tim Hudson (tjh@cryptsoft.com).
- * 
- * Copyright remains Eric Young's, and as such any Copyright notices in
- * the code are not to be removed.
- * If this package is used in a product, Eric Young should be given attribution
- * as the author of the parts of the library used.
- * This can be in the form of a textual message at program startup or
- * in documentation (online or textual) provided with the package.
- * 
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions
- * are met:
- * 1. Redistributions of source code must retain the copyright
- *    notice, this list of conditions and the following disclaimer.
- * 2. Redistributions in binary form must reproduce the above copyright
- *    notice, this list of conditions and the following disclaimer in the
- *    documentation and/or other materials provided with the distribution.
- * 3. All advertising materials mentioning features or use of this software
- *    must display the following acknowledgement:
- *    "This product includes cryptographic software written by
- *     Eric Young (eay@cryptsoft.com)"
- *    The word 'cryptographic' can be left out if the rouines from the library
- *    being used are not cryptographic related :-).
- * 4. If you include any Windows specific code (or a derivative thereof) from 
- *    the apps directory (application code) you must include an acknowledgement:
- *    "This product includes software written by Tim Hudson (tjh@cryptsoft.com)"
- * 
- * THIS SOFTWARE IS PROVIDED BY ERIC YOUNG ``AS IS'' AND
- * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
- * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
- * ARE DISCLAIMED.  IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE
- * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
- * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
- * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
- * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
- * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
- * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
- * SUCH DAMAGE.
- * 
- * The licence and distribution terms for any publically available version or
- * derivative of this code cannot be changed.  i.e. this code cannot simply be
- * copied and put under another distribution licence
- * [including the GNU Public Licence.]
- */
-
-#include <openssl/blowfish.h>
-#include "bf_locl.h"
-
-void BF_cbc_encrypt(const unsigned char *in, unsigned char *out, long length,
-	     const BF_KEY *schedule, unsigned char *ivec, int encrypt)
-	{
-	register BF_LONG tin0,tin1;
-	register BF_LONG tout0,tout1,xor0,xor1;
-	register long l=length;
-	BF_LONG tin[2];
-
-	if (encrypt)
-		{
-		n2l(ivec,tout0);
-		n2l(ivec,tout1);
-		ivec-=8;
-		for (l-=8; l>=0; l-=8)
-			{
-			n2l(in,tin0);
-			n2l(in,tin1);
-			tin0^=tout0;
-			tin1^=tout1;
-			tin[0]=tin0;
-			tin[1]=tin1;
-			BF_encrypt(tin,schedule);
-			tout0=tin[0];
-			tout1=tin[1];
-			l2n(tout0,out);
-			l2n(tout1,out);
-			}
-		if (l != -8)
-			{
-			n2ln(in,tin0,tin1,l+8);
-			tin0^=tout0;
-			tin1^=tout1;
-			tin[0]=tin0;
-			tin[1]=tin1;
-			BF_encrypt(tin,schedule);
-			tout0=tin[0];
-			tout1=tin[1];
-			l2n(tout0,out);
-			l2n(tout1,out);
-			}
-		l2n(tout0,ivec);
-		l2n(tout1,ivec);
-		}
-	else
-		{
-		n2l(ivec,xor0);
-		n2l(ivec,xor1);
-		ivec-=8;
-		for (l-=8; l>=0; l-=8)
-			{
-			n2l(in,tin0);
-			n2l(in,tin1);
-			tin[0]=tin0;
-			tin[1]=tin1;
-			BF_decrypt(tin,schedule);
-			tout0=tin[0]^xor0;
-			tout1=tin[1]^xor1;
-			l2n(tout0,out);
-			l2n(tout1,out);
-			xor0=tin0;
-			xor1=tin1;
-			}
-		if (l != -8)
-			{
-			n2l(in,tin0);
-			n2l(in,tin1);
-			tin[0]=tin0;
-			tin[1]=tin1;
-			BF_decrypt(tin,schedule);
-			tout0=tin[0]^xor0;
-			tout1=tin[1]^xor1;
-			l2nn(tout0,tout1,out,l+8);
-			xor0=tin0;
-			xor1=tin1;
-			}
-		l2n(xor0,ivec);
-		l2n(xor1,ivec);
-		}
-	tin0=tin1=tout0=tout1=xor0=xor1=0;
-	tin[0]=tin[1]=0;
-	}
-
diff --git a/crypto/openssl/crypto/bf/bf_cfb64.c b/crypto/openssl/crypto/bf/bf_cfb64.c
deleted file mode 100644
index 6451c8d407f7..000000000000
--- a/crypto/openssl/crypto/bf/bf_cfb64.c
+++ /dev/null
@@ -1,121 +0,0 @@
-/* crypto/bf/bf_cfb64.c */
-/* Copyright (C) 1995-1998 Eric Young (eay@cryptsoft.com)
- * All rights reserved.
- *
- * This package is an SSL implementation written
- * by Eric Young (eay@cryptsoft.com).
- * The implementation was written so as to conform with Netscapes SSL.
- * 
- * This library is free for commercial and non-commercial use as long as
- * the following conditions are aheared to.  The following conditions
- * apply to all code found in this distribution, be it the RC4, RSA,
- * lhash, DES, etc., code; not just the SSL code.  The SSL documentation
- * included with this distribution is covered by the same copyright terms
- * except that the holder is Tim Hudson (tjh@cryptsoft.com).
- * 
- * Copyright remains Eric Young's, and as such any Copyright notices in
- * the code are not to be removed.
- * If this package is used in a product, Eric Young should be given attribution
- * as the author of the parts of the library used.
- * This can be in the form of a textual message at program startup or
- * in documentation (online or textual) provided with the package.
- * 
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions
- * are met:
- * 1. Redistributions of source code must retain the copyright
- *    notice, this list of conditions and the following disclaimer.
- * 2. Redistributions in binary form must reproduce the above copyright
- *    notice, this list of conditions and the following disclaimer in the
- *    documentation and/or other materials provided with the distribution.
- * 3. All advertising materials mentioning features or use of this software
- *    must display the following acknowledgement:
- *    "This product includes cryptographic software written by
- *     Eric Young (eay@cryptsoft.com)"
- *    The word 'cryptographic' can be left out if the rouines from the library
- *    being used are not cryptographic related :-).
- * 4. If you include any Windows specific code (or a derivative thereof) from 
- *    the apps directory (application code) you must include an acknowledgement:
- *    "This product includes software written by Tim Hudson (tjh@cryptsoft.com)"
- * 
- * THIS SOFTWARE IS PROVIDED BY ERIC YOUNG ``AS IS'' AND
- * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
- * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
- * ARE DISCLAIMED.  IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE
- * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
- * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
- * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
- * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
- * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
- * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
- * SUCH DAMAGE.
- * 
- * The licence and distribution terms for any publically available version or
- * derivative of this code cannot be changed.  i.e. this code cannot simply be
- * copied and put under another distribution licence
- * [including the GNU Public Licence.]
- */
-
-#include <openssl/blowfish.h>
-#include "bf_locl.h"
-
-/* The input and output encrypted as though 64bit cfb mode is being
- * used.  The extra state information to record how much of the
- * 64bit block we have used is contained in *num;
- */
-
-void BF_cfb64_encrypt(const unsigned char *in, unsigned char *out, long length,
-	     const BF_KEY *schedule, unsigned char *ivec, int *num, int encrypt)
-	{
-	register BF_LONG v0,v1,t;
-	register int n= *num;
-	register long l=length;
-	BF_LONG ti[2];
-	unsigned char *iv,c,cc;
-
-	iv=(unsigned char *)ivec;
-	if (encrypt)
-		{
-		while (l--)
-			{
-			if (n == 0)
-				{
-				n2l(iv,v0); ti[0]=v0;
-				n2l(iv,v1); ti[1]=v1;
-				BF_encrypt((BF_LONG *)ti,schedule);
-				iv=(unsigned char *)ivec;
-				t=ti[0]; l2n(t,iv);
-				t=ti[1]; l2n(t,iv);
-				iv=(unsigned char *)ivec;
-				}
-			c= *(in++)^iv[n];
-			*(out++)=c;
-			iv[n]=c;
-			n=(n+1)&0x07;
-			}
-		}
-	else
-		{
-		while (l--)
-			{
-			if (n == 0)
-				{
-				n2l(iv,v0); ti[0]=v0;
-				n2l(iv,v1); ti[1]=v1;
-				BF_encrypt((BF_LONG *)ti,schedule);
-				iv=(unsigned char *)ivec;
-				t=ti[0]; l2n(t,iv);
-				t=ti[1]; l2n(t,iv);
-				iv=(unsigned char *)ivec;
-				}
-			cc= *(in++);
-			c=iv[n];
-			iv[n]=cc;
-			*(out++)=c^cc;
-			n=(n+1)&0x07;
-			}
-		}
-	v0=v1=ti[0]=ti[1]=t=c=cc=0;
-	*num=n;
-	}
-
diff --git a/crypto/openssl/crypto/bf/bf_ecb.c b/crypto/openssl/crypto/bf/bf_ecb.c
deleted file mode 100644
index 1607cefa32cb..000000000000
--- a/crypto/openssl/crypto/bf/bf_ecb.c
+++ /dev/null
@@ -1,96 +0,0 @@
-/* crypto/bf/bf_ecb.c */
-/* Copyright (C) 1995-1998 Eric Young (eay@cryptsoft.com)
- * All rights reserved.
- *
- * This package is an SSL implementation written
- * by Eric Young (eay@cryptsoft.com).
- * The implementation was written so as to conform with Netscapes SSL.
- * 
- * This library is free for commercial and non-commercial use as long as
- * the following conditions are aheared to.  The following conditions
- * apply to all code found in this distribution, be it the RC4, RSA,
- * lhash, DES, etc., code; not just the SSL code.  The SSL documentation
- * included with this distribution is covered by the same copyright terms
- * except that the holder is Tim Hudson (tjh@cryptsoft.com).
- * 
- * Copyright remains Eric Young's, and as such any Copyright notices in
- * the code are not to be removed.
- * If this package is used in a product, Eric Young should be given attribution
- * as the author of the parts of the library used.
- * This can be in the form of a textual message at program startup or
- * in documentation (online or textual) provided with the package.
- * 
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions
- * are met:
- * 1. Redistributions of source code must retain the copyright
- *    notice, this list of conditions and the following disclaimer.
- * 2. Redistributions in binary form must reproduce the above copyright
- *    notice, this list of conditions and the following disclaimer in the
- *    documentation and/or other materials provided with the distribution.
- * 3. All advertising materials mentioning features or use of this software
- *    must display the following acknowledgement:
- *    "This product includes cryptographic software written by
- *     Eric Young (eay@cryptsoft.com)"
- *    The word 'cryptographic' can be left out if the rouines from the library
- *    being used are not cryptographic related :-).
- * 4. If you include any Windows specific code (or a derivative thereof) from 
- *    the apps directory (application code) you must include an acknowledgement:
- *    "This product includes software written by Tim Hudson (tjh@cryptsoft.com)"
- * 
- * THIS SOFTWARE IS PROVIDED BY ERIC YOUNG ``AS IS'' AND
- * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
- * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
- * ARE DISCLAIMED.  IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE
- * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
- * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
- * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
- * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
- * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
- * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
- * SUCH DAMAGE.
- * 
- * The licence and distribution terms for any publically available version or
- * derivative of this code cannot be changed.  i.e. this code cannot simply be
- * copied and put under another distribution licence
- * [including the GNU Public Licence.]
- */
-
-#include <openssl/blowfish.h>
-#include "bf_locl.h"
-#include <openssl/opensslv.h>
-
-/* Blowfish as implemented from 'Blowfish: Springer-Verlag paper'
- * (From LECTURE NOTES IN COMPUTER SCIENCE 809, FAST SOFTWARE ENCRYPTION,
- * CAMBRIDGE SECURITY WORKSHOP, CAMBRIDGE, U.K., DECEMBER 9-11, 1993)
- */
-
-const char BF_version[]="Blowfish" OPENSSL_VERSION_PTEXT;
-
-const char *BF_options(void)
-	{
-#ifdef BF_PTR
-	return("blowfish(ptr)");
-#elif defined(BF_PTR2)
-	return("blowfish(ptr2)");
-#else
-	return("blowfish(idx)");
-#endif
-	}
-
-void BF_ecb_encrypt(const unsigned char *in, unsigned char *out,
-	     const BF_KEY *key, int encrypt)
-	{
-	BF_LONG l,d[2];
-
-	n2l(in,l); d[0]=l;
-	n2l(in,l); d[1]=l;
-	if (encrypt)
-		BF_encrypt(d,key);
-	else
-		BF_decrypt(d,key);
-	l=d[0]; l2n(l,out);
-	l=d[1]; l2n(l,out);
-	l=d[0]=d[1]=0;
-	}
-
diff --git a/crypto/openssl/crypto/bf/bf_enc.c b/crypto/openssl/crypto/bf/bf_enc.c
deleted file mode 100644
index 2d21d09f425f..000000000000
--- a/crypto/openssl/crypto/bf/bf_enc.c
+++ /dev/null
@@ -1,306 +0,0 @@
-/* crypto/bf/bf_enc.c */
-/* Copyright (C) 1995-1998 Eric Young (eay@cryptsoft.com)
- * All rights reserved.
- *
- * This package is an SSL implementation written
- * by Eric Young (eay@cryptsoft.com).
- * The implementation was written so as to conform with Netscapes SSL.
- * 
- * This library is free for commercial and non-commercial use as long as
- * the following conditions are aheared to.  The following conditions
- * apply to all code found in this distribution, be it the RC4, RSA,
- * lhash, DES, etc., code; not just the SSL code.  The SSL documentation
- * included with this distribution is covered by the same copyright terms
- * except that the holder is Tim Hudson (tjh@cryptsoft.com).
- * 
- * Copyright remains Eric Young's, and as such any Copyright notices in
- * the code are not to be removed.
- * If this package is used in a product, Eric Young should be given attribution
- * as the author of the parts of the library used.
- * This can be in the form of a textual message at program startup or
- * in documentation (online or textual) provided with the package.
- * 
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions
- * are met:
- * 1. Redistributions of source code must retain the copyright
- *    notice, this list of conditions and the following disclaimer.
- * 2. Redistributions in binary form must reproduce the above copyright
- *    notice, this list of conditions and the following disclaimer in the
- *    documentation and/or other materials provided with the distribution.
- * 3. All advertising materials mentioning features or use of this software
- *    must display the following acknowledgement:
- *    "This product includes cryptographic software written by
- *     Eric Young (eay@cryptsoft.com)"
- *    The word 'cryptographic' can be left out if the rouines from the library
- *    being used are not cryptographic related :-).
- * 4. If you include any Windows specific code (or a derivative thereof) from 
- *    the apps directory (application code) you must include an acknowledgement:
- *    "This product includes software written by Tim Hudson (tjh@cryptsoft.com)"
- * 
- * THIS SOFTWARE IS PROVIDED BY ERIC YOUNG ``AS IS'' AND
- * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
- * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
- * ARE DISCLAIMED.  IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE
- * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
- * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
- * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
- * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
- * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
- * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
- * SUCH DAMAGE.
- * 
- * The licence and distribution terms for any publically available version or
- * derivative of this code cannot be changed.  i.e. this code cannot simply be
- * copied and put under another distribution licence
- * [including the GNU Public Licence.]
- */
-
-#include <openssl/blowfish.h>
-#include "bf_locl.h"
-
-/* Blowfish as implemented from 'Blowfish: Springer-Verlag paper'
- * (From LECTURE NOTES IN COMPUTER SCIENCE 809, FAST SOFTWARE ENCRYPTION,
- * CAMBRIDGE SECURITY WORKSHOP, CAMBRIDGE, U.K., DECEMBER 9-11, 1993)
- */
-
-#if (BF_ROUNDS != 16) && (BF_ROUNDS != 20)
-#error If you set BF_ROUNDS to some value other than 16 or 20, you will have \
-to modify the code.
-#endif
-
-void BF_encrypt(BF_LONG *data, const BF_KEY *key)
-	{
-#ifndef BF_PTR2
-	register BF_LONG l,r;
-	register const BF_LONG *p,*s;
-
-	p=key->P;
-	s= &(key->S[0]);
-	l=data[0];
-	r=data[1];
-
-	l^=p[0];
-	BF_ENC(r,l,s,p[ 1]);
-	BF_ENC(l,r,s,p[ 2]);
-	BF_ENC(r,l,s,p[ 3]);
-	BF_ENC(l,r,s,p[ 4]);
-	BF_ENC(r,l,s,p[ 5]);
-	BF_ENC(l,r,s,p[ 6]);
-	BF_ENC(r,l,s,p[ 7]);
-	BF_ENC(l,r,s,p[ 8]);
-	BF_ENC(r,l,s,p[ 9]);
-	BF_ENC(l,r,s,p[10]);
-	BF_ENC(r,l,s,p[11]);
-	BF_ENC(l,r,s,p[12]);
-	BF_ENC(r,l,s,p[13]);
-	BF_ENC(l,r,s,p[14]);
-	BF_ENC(r,l,s,p[15]);
-	BF_ENC(l,r,s,p[16]);
-#if BF_ROUNDS == 20
-	BF_ENC(r,l,s,p[17]);
-	BF_ENC(l,r,s,p[18]);
-	BF_ENC(r,l,s,p[19]);
-	BF_ENC(l,r,s,p[20]);
-#endif
-	r^=p[BF_ROUNDS+1];
-
-	data[1]=l&0xffffffffL;
-	data[0]=r&0xffffffffL;
-#else
-	register BF_LONG l,r,t,*k;
-
-	l=data[0];
-	r=data[1];
-	k=(BF_LONG*)key;
-
-	l^=k[0];
-	BF_ENC(r,l,k, 1);
-	BF_ENC(l,r,k, 2);
-	BF_ENC(r,l,k, 3);
-	BF_ENC(l,r,k, 4);
-	BF_ENC(r,l,k, 5);
-	BF_ENC(l,r,k, 6);
-	BF_ENC(r,l,k, 7);
-	BF_ENC(l,r,k, 8);
-	BF_ENC(r,l,k, 9);
-	BF_ENC(l,r,k,10);
-	BF_ENC(r,l,k,11);
-	BF_ENC(l,r,k,12);
-	BF_ENC(r,l,k,13);
-	BF_ENC(l,r,k,14);
-	BF_ENC(r,l,k,15);
-	BF_ENC(l,r,k,16);
-#if BF_ROUNDS == 20
-	BF_ENC(r,l,k,17);
-	BF_ENC(l,r,k,18);
-	BF_ENC(r,l,k,19);
-	BF_ENC(l,r,k,20);
-#endif
-	r^=k[BF_ROUNDS+1];
-
-	data[1]=l&0xffffffffL;
-	data[0]=r&0xffffffffL;
-#endif
-	}
-
-#ifndef BF_DEFAULT_OPTIONS
-
-void BF_decrypt(BF_LONG *data, const BF_KEY *key)
-	{
-#ifndef BF_PTR2
-	register BF_LONG l,r;
-	register const BF_LONG *p,*s;
-
-	p=key->P;
-	s= &(key->S[0]);
-	l=data[0];
-	r=data[1];
-
-	l^=p[BF_ROUNDS+1];
-#if BF_ROUNDS == 20
-	BF_ENC(r,l,s,p[20]);
-	BF_ENC(l,r,s,p[19]);
-	BF_ENC(r,l,s,p[18]);
-	BF_ENC(l,r,s,p[17]);
-#endif
-	BF_ENC(r,l,s,p[16]);
-	BF_ENC(l,r,s,p[15]);
-	BF_ENC(r,l,s,p[14]);
-	BF_ENC(l,r,s,p[13]);
-	BF_ENC(r,l,s,p[12]);
-	BF_ENC(l,r,s,p[11]);
-	BF_ENC(r,l,s,p[10]);
-	BF_ENC(l,r,s,p[ 9]);
-	BF_ENC(r,l,s,p[ 8]);
-	BF_ENC(l,r,s,p[ 7]);
-	BF_ENC(r,l,s,p[ 6]);
-	BF_ENC(l,r,s,p[ 5]);
-	BF_ENC(r,l,s,p[ 4]);
-	BF_ENC(l,r,s,p[ 3]);
-	BF_ENC(r,l,s,p[ 2]);
-	BF_ENC(l,r,s,p[ 1]);
-	r^=p[0];
-
-	data[1]=l&0xffffffffL;
-	data[0]=r&0xffffffffL;
-#else
-	register BF_LONG l,r,t,*k;
-
-	l=data[0];
-	r=data[1];
-	k=(BF_LONG *)key;
-
-	l^=k[BF_ROUNDS+1];
-#if BF_ROUNDS == 20
-	BF_ENC(r,l,k,20);
-	BF_ENC(l,r,k,19);
-	BF_ENC(r,l,k,18);
-	BF_ENC(l,r,k,17);
-#endif
-	BF_ENC(r,l,k,16);
-	BF_ENC(l,r,k,15);
-	BF_ENC(r,l,k,14);
-	BF_ENC(l,r,k,13);
-	BF_ENC(r,l,k,12);
-	BF_ENC(l,r,k,11);
-	BF_ENC(r,l,k,10);
-	BF_ENC(l,r,k, 9);
-	BF_ENC(r,l,k, 8);
-	BF_ENC(l,r,k, 7);
-	BF_ENC(r,l,k, 6);
-	BF_ENC(l,r,k, 5);
-	BF_ENC(r,l,k, 4);
-	BF_ENC(l,r,k, 3);
-	BF_ENC(r,l,k, 2);
-	BF_ENC(l,r,k, 1);
-	r^=k[0];
-
-	data[1]=l&0xffffffffL;
-	data[0]=r&0xffffffffL;
-#endif
-	}
-
-void BF_cbc_encrypt(const unsigned char *in, unsigned char *out, long length,
-	     const BF_KEY *schedule, unsigned char *ivec, int encrypt)
-	{
-	register BF_LONG tin0,tin1;
-	register BF_LONG tout0,tout1,xor0,xor1;
-	register long l=length;
-	BF_LONG tin[2];
-
-	if (encrypt)
-		{
-		n2l(ivec,tout0);
-		n2l(ivec,tout1);
-		ivec-=8;
-		for (l-=8; l>=0; l-=8)
-			{
-			n2l(in,tin0);
-			n2l(in,tin1);
-			tin0^=tout0;
-			tin1^=tout1;
-			tin[0]=tin0;
-			tin[1]=tin1;
-			BF_encrypt(tin,schedule);
-			tout0=tin[0];
-			tout1=tin[1];
-			l2n(tout0,out);
-			l2n(tout1,out);
-			}
-		if (l != -8)
-			{
-			n2ln(in,tin0,tin1,l+8);
-			tin0^=tout0;
-			tin1^=tout1;
-			tin[0]=tin0;
-			tin[1]=tin1;
-			BF_encrypt(tin,schedule);
-			tout0=tin[0];
-			tout1=tin[1];
-			l2n(tout0,out);
-			l2n(tout1,out);
-			}
-		l2n(tout0,ivec);
-		l2n(tout1,ivec);
-		}
-	else
-		{
-		n2l(ivec,xor0);
-		n2l(ivec,xor1);
-		ivec-=8;
-		for (l-=8; l>=0; l-=8)
-			{
-			n2l(in,tin0);
-			n2l(in,tin1);
-			tin[0]=tin0;
-			tin[1]=tin1;
-			BF_decrypt(tin,schedule);
-			tout0=tin[0]^xor0;
-			tout1=tin[1]^xor1;
-			l2n(tout0,out);
-			l2n(tout1,out);
-			xor0=tin0;
-			xor1=tin1;
-			}
-		if (l != -8)
-			{
-			n2l(in,tin0);
-			n2l(in,tin1);
-			tin[0]=tin0;
-			tin[1]=tin1;
-			BF_decrypt(tin,schedule);
-			tout0=tin[0]^xor0;
-			tout1=tin[1]^xor1;
-			l2nn(tout0,tout1,out,l+8);
-			xor0=tin0;
-			xor1=tin1;
-			}
-		l2n(xor0,ivec);
-		l2n(xor1,ivec);
-		}
-	tin0=tin1=tout0=tout1=xor0=xor1=0;
-	tin[0]=tin[1]=0;
-	}
-
-#endif
diff --git a/crypto/openssl/crypto/bf/bf_locl.h b/crypto/openssl/crypto/bf/bf_locl.h
deleted file mode 100644
index cc7c3ec99221..000000000000
--- a/crypto/openssl/crypto/bf/bf_locl.h
+++ /dev/null
@@ -1,219 +0,0 @@
-/* crypto/bf/bf_locl.h */
-/* Copyright (C) 1995-1997 Eric Young (eay@cryptsoft.com)
- * All rights reserved.
- *
- * This package is an SSL implementation written
- * by Eric Young (eay@cryptsoft.com).
- * The implementation was written so as to conform with Netscapes SSL.
- * 
- * This library is free for commercial and non-commercial use as long as
- * the following conditions are aheared to.  The following conditions
- * apply to all code found in this distribution, be it the RC4, RSA,
- * lhash, DES, etc., code; not just the SSL code.  The SSL documentation
- * included with this distribution is covered by the same copyright terms
- * except that the holder is Tim Hudson (tjh@cryptsoft.com).
- * 
- * Copyright remains Eric Young's, and as such any Copyright notices in
- * the code are not to be removed.
- * If this package is used in a product, Eric Young should be given attribution
- * as the author of the parts of the library used.
- * This can be in the form of a textual message at program startup or
- * in documentation (online or textual) provided with the package.
- * 
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions
- * are met:
- * 1. Redistributions of source code must retain the copyright
- *    notice, this list of conditions and the following disclaimer.
- * 2. Redistributions in binary form must reproduce the above copyright
- *    notice, this list of conditions and the following disclaimer in the
- *    documentation and/or other materials provided with the distribution.
- * 3. All advertising materials mentioning features or use of this software
- *    must display the following acknowledgement:
- *    "This product includes cryptographic software written by
- *     Eric Young (eay@cryptsoft.com)"
- *    The word 'cryptographic' can be left out if the rouines from the library
- *    being used are not cryptographic related :-).
- * 4. If you include any Windows specific code (or a derivative thereof) from 
- *    the apps directory (application code) you must include an acknowledgement:
- *    "This product includes software written by Tim Hudson (tjh@cryptsoft.com)"
- * 
- * THIS SOFTWARE IS PROVIDED BY ERIC YOUNG ``AS IS'' AND
- * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
- * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
- * ARE DISCLAIMED.  IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE
- * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
- * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
- * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
- * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
- * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
- * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
- * SUCH DAMAGE.
- * 
- * The licence and distribution terms for any publically available version or
- * derivative of this code cannot be changed.  i.e. this code cannot simply be
- * copied and put under another distribution licence
- * [including the GNU Public Licence.]
- */
-
-#ifndef HEADER_BF_LOCL_H
-#define HEADER_BF_LOCL_H
-#include <openssl/opensslconf.h> /* BF_PTR, BF_PTR2 */
-
-#undef c2l
-#define c2l(c,l)	(l =((unsigned long)(*((c)++)))    , \
-			 l|=((unsigned long)(*((c)++)))<< 8L, \
-			 l|=((unsigned long)(*((c)++)))<<16L, \
-			 l|=((unsigned long)(*((c)++)))<<24L)
-
-/* NOTE - c is not incremented as per c2l */
-#undef c2ln
-#define c2ln(c,l1,l2,n)	{ \
-			c+=n; \
-			l1=l2=0; \
-			switch (n) { \
-			case 8: l2 =((unsigned long)(*(--(c))))<<24L; \
-			case 7: l2|=((unsigned long)(*(--(c))))<<16L; \
-			case 6: l2|=((unsigned long)(*(--(c))))<< 8L; \
-			case 5: l2|=((unsigned long)(*(--(c))));     \
-			case 4: l1 =((unsigned long)(*(--(c))))<<24L; \
-			case 3: l1|=((unsigned long)(*(--(c))))<<16L; \
-			case 2: l1|=((unsigned long)(*(--(c))))<< 8L; \
-			case 1: l1|=((unsigned long)(*(--(c))));     \
-				} \
-			}
-
-#undef l2c
-#define l2c(l,c)	(*((c)++)=(unsigned char)(((l)     )&0xff), \
-			 *((c)++)=(unsigned char)(((l)>> 8L)&0xff), \
-			 *((c)++)=(unsigned char)(((l)>>16L)&0xff), \
-			 *((c)++)=(unsigned char)(((l)>>24L)&0xff))
-
-/* NOTE - c is not incremented as per l2c */
-#undef l2cn
-#define l2cn(l1,l2,c,n)	{ \
-			c+=n; \
-			switch (n) { \
-			case 8: *(--(c))=(unsigned char)(((l2)>>24L)&0xff); \
-			case 7: *(--(c))=(unsigned char)(((l2)>>16L)&0xff); \
-			case 6: *(--(c))=(unsigned char)(((l2)>> 8L)&0xff); \
-			case 5: *(--(c))=(unsigned char)(((l2)     )&0xff); \
-			case 4: *(--(c))=(unsigned char)(((l1)>>24L)&0xff); \
-			case 3: *(--(c))=(unsigned char)(((l1)>>16L)&0xff); \
-			case 2: *(--(c))=(unsigned char)(((l1)>> 8L)&0xff); \
-			case 1: *(--(c))=(unsigned char)(((l1)     )&0xff); \
-				} \
-			}
-
-/* NOTE - c is not incremented as per n2l */
-#define n2ln(c,l1,l2,n)	{ \
-			c+=n; \
-			l1=l2=0; \
-			switch (n) { \
-			case 8: l2 =((unsigned long)(*(--(c))))    ; \
-			case 7: l2|=((unsigned long)(*(--(c))))<< 8; \
-			case 6: l2|=((unsigned long)(*(--(c))))<<16; \
-			case 5: l2|=((unsigned long)(*(--(c))))<<24; \
-			case 4: l1 =((unsigned long)(*(--(c))))    ; \
-			case 3: l1|=((unsigned long)(*(--(c))))<< 8; \
-			case 2: l1|=((unsigned long)(*(--(c))))<<16; \
-			case 1: l1|=((unsigned long)(*(--(c))))<<24; \
-				} \
-			}
-
-/* NOTE - c is not incremented as per l2n */
-#define l2nn(l1,l2,c,n)	{ \
-			c+=n; \
-			switch (n) { \
-			case 8: *(--(c))=(unsigned char)(((l2)    )&0xff); \
-			case 7: *(--(c))=(unsigned char)(((l2)>> 8)&0xff); \
-			case 6: *(--(c))=(unsigned char)(((l2)>>16)&0xff); \
-			case 5: *(--(c))=(unsigned char)(((l2)>>24)&0xff); \
-			case 4: *(--(c))=(unsigned char)(((l1)    )&0xff); \
-			case 3: *(--(c))=(unsigned char)(((l1)>> 8)&0xff); \
-			case 2: *(--(c))=(unsigned char)(((l1)>>16)&0xff); \
-			case 1: *(--(c))=(unsigned char)(((l1)>>24)&0xff); \
-				} \
-			}
-
-#undef n2l
-#define n2l(c,l)        (l =((unsigned long)(*((c)++)))<<24L, \
-                         l|=((unsigned long)(*((c)++)))<<16L, \
-                         l|=((unsigned long)(*((c)++)))<< 8L, \
-                         l|=((unsigned long)(*((c)++))))
-
-#undef l2n
-#define l2n(l,c)        (*((c)++)=(unsigned char)(((l)>>24L)&0xff), \
-                         *((c)++)=(unsigned char)(((l)>>16L)&0xff), \
-                         *((c)++)=(unsigned char)(((l)>> 8L)&0xff), \
-                         *((c)++)=(unsigned char)(((l)     )&0xff))
-
-/* This is actually a big endian algorithm, the most significant byte
- * is used to lookup array 0 */
-
-#if defined(BF_PTR2)
-
-/*
- * This is basically a special Intel version. Point is that Intel
- * doesn't have many registers, but offers a reach choice of addressing
- * modes. So we spare some registers by directly traversing BF_KEY
- * structure and hiring the most decorated addressing mode. The code
- * generated by EGCS is *perfectly* competitive with assembler
- * implementation!
- */
-#define BF_ENC(LL,R,KEY,Pi) (\
-	LL^=KEY[Pi], \
-	t=  KEY[BF_ROUNDS+2 +   0 + ((R>>24)&0xFF)], \
-	t+= KEY[BF_ROUNDS+2 + 256 + ((R>>16)&0xFF)], \
-	t^= KEY[BF_ROUNDS+2 + 512 + ((R>>8 )&0xFF)], \
-	t+= KEY[BF_ROUNDS+2 + 768 + ((R    )&0xFF)], \
-	LL^=t \
-	)
-
-#elif defined(BF_PTR)
-
-#ifndef BF_LONG_LOG2
-#define BF_LONG_LOG2  2       /* default to BF_LONG being 32 bits */
-#endif
-#define BF_M  (0xFF<<BF_LONG_LOG2)
-#define BF_0  (24-BF_LONG_LOG2)
-#define BF_1  (16-BF_LONG_LOG2)
-#define BF_2  ( 8-BF_LONG_LOG2)
-#define BF_3  BF_LONG_LOG2 /* left shift */
-
-/*
- * This is normally very good on RISC platforms where normally you
- * have to explicitly "multiply" array index by sizeof(BF_LONG)
- * in order to calculate the effective address. This implementation
- * excuses CPU from this extra work. Power[PC] uses should have most
- * fun as (R>>BF_i)&BF_M gets folded into a single instruction, namely
- * rlwinm. So let'em double-check if their compiler does it.
- */
-
-#define BF_ENC(LL,R,S,P) ( \
-	LL^=P, \
-	LL^= (((*(BF_LONG *)((unsigned char *)&(S[  0])+((R>>BF_0)&BF_M))+ \
-		*(BF_LONG *)((unsigned char *)&(S[256])+((R>>BF_1)&BF_M)))^ \
-		*(BF_LONG *)((unsigned char *)&(S[512])+((R>>BF_2)&BF_M)))+ \
-		*(BF_LONG *)((unsigned char *)&(S[768])+((R<<BF_3)&BF_M))) \
-	)
-#else
-
-/*
- * This is a *generic* version. Seem to perform best on platforms that
- * offer explicit support for extraction of 8-bit nibbles preferably
- * complemented with "multiplying" of array index by sizeof(BF_LONG).
- * For the moment of this writing the list comprises Alpha CPU featuring
- * extbl and s[48]addq instructions.
- */
-
-#define BF_ENC(LL,R,S,P) ( \
-	LL^=P, \
-	LL^=(((	S[       ((int)(R>>24)&0xff)] + \
-		S[0x0100+((int)(R>>16)&0xff)])^ \
-		S[0x0200+((int)(R>> 8)&0xff)])+ \
-		S[0x0300+((int)(R    )&0xff)])&0xffffffffL \
-	)
-#endif
-
-#endif
diff --git a/crypto/openssl/crypto/bf/bf_ofb64.c b/crypto/openssl/crypto/bf/bf_ofb64.c
deleted file mode 100644
index f2a9ff6e417d..000000000000
--- a/crypto/openssl/crypto/bf/bf_ofb64.c
+++ /dev/null
@@ -1,110 +0,0 @@
-/* crypto/bf/bf_ofb64.c */
-/* Copyright (C) 1995-1998 Eric Young (eay@cryptsoft.com)
- * All rights reserved.
- *
- * This package is an SSL implementation written
- * by Eric Young (eay@cryptsoft.com).
- * The implementation was written so as to conform with Netscapes SSL.
- * 
- * This library is free for commercial and non-commercial use as long as
- * the following conditions are aheared to.  The following conditions
- * apply to all code found in this distribution, be it the RC4, RSA,
- * lhash, DES, etc., code; not just the SSL code.  The SSL documentation
- * included with this distribution is covered by the same copyright terms
- * except that the holder is Tim Hudson (tjh@cryptsoft.com).
- * 
- * Copyright remains Eric Young's, and as such any Copyright notices in
- * the code are not to be removed.
- * If this package is used in a product, Eric Young should be given attribution
- * as the author of the parts of the library used.
- * This can be in the form of a textual message at program startup or
- * in documentation (online or textual) provided with the package.
- * 
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions
- * are met:
- * 1. Redistributions of source code must retain the copyright
- *    notice, this list of conditions and the following disclaimer.
- * 2. Redistributions in binary form must reproduce the above copyright
- *    notice, this list of conditions and the following disclaimer in the
- *    documentation and/or other materials provided with the distribution.
- * 3. All advertising materials mentioning features or use of this software
- *    must display the following acknowledgement:
- *    "This product includes cryptographic software written by
- *     Eric Young (eay@cryptsoft.com)"
- *    The word 'cryptographic' can be left out if the rouines from the library
- *    being used are not cryptographic related :-).
- * 4. If you include any Windows specific code (or a derivative thereof) from 
- *    the apps directory (application code) you must include an acknowledgement:
- *    "This product includes software written by Tim Hudson (tjh@cryptsoft.com)"
- * 
- * THIS SOFTWARE IS PROVIDED BY ERIC YOUNG ``AS IS'' AND
- * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
- * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
- * ARE DISCLAIMED.  IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE
- * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
- * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
- * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
- * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
- * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
- * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
- * SUCH DAMAGE.
- * 
- * The licence and distribution terms for any publically available version or
- * derivative of this code cannot be changed.  i.e. this code cannot simply be
- * copied and put under another distribution licence
- * [including the GNU Public Licence.]
- */
-
-#include <openssl/blowfish.h>
-#include "bf_locl.h"
-
-/* The input and output encrypted as though 64bit ofb mode is being
- * used.  The extra state information to record how much of the
- * 64bit block we have used is contained in *num;
- */
-void BF_ofb64_encrypt(const unsigned char *in, unsigned char *out, long length,
-	     const BF_KEY *schedule, unsigned char *ivec, int *num)
-	{
-	register BF_LONG v0,v1,t;
-	register int n= *num;
-	register long l=length;
-	unsigned char d[8];
-	register char *dp;
-	BF_LONG ti[2];
-	unsigned char *iv;
-	int save=0;
-
-	iv=(unsigned char *)ivec;
-	n2l(iv,v0);
-	n2l(iv,v1);
-	ti[0]=v0;
-	ti[1]=v1;
-	dp=(char *)d;
-	l2n(v0,dp);
-	l2n(v1,dp);
-	while (l--)
-		{
-		if (n == 0)
-			{
-			BF_encrypt((BF_LONG *)ti,schedule);
-			dp=(char *)d;
-			t=ti[0]; l2n(t,dp);
-			t=ti[1]; l2n(t,dp);
-			save++;
-			}
-		*(out++)= *(in++)^d[n];
-		n=(n+1)&0x07;
-		}
-	if (save)
-		{
-		v0=ti[0];
-		v1=ti[1];
-		iv=(unsigned char *)ivec;
-		l2n(v0,iv);
-		l2n(v1,iv);
-		}
-	t=v0=v1=ti[0]=ti[1]=0;
-	*num=n;
-	}
-
diff --git a/crypto/openssl/crypto/bf/bf_opts.c b/crypto/openssl/crypto/bf/bf_opts.c
deleted file mode 100644
index 1721bb99b4ad..000000000000
--- a/crypto/openssl/crypto/bf/bf_opts.c
+++ /dev/null
@@ -1,331 +0,0 @@
-/* crypto/bf/bf_opts.c */
-/* Copyright (C) 1995-1998 Eric Young (eay@cryptsoft.com)
- * All rights reserved.
- *
- * This package is an SSL implementation written
- * by Eric Young (eay@cryptsoft.com).
- * The implementation was written so as to conform with Netscapes SSL.
- * 
- * This library is free for commercial and non-commercial use as long as
- * the following conditions are aheared to.  The following conditions
- * apply to all code found in this distribution, be it the RC4, RSA,
- * lhash, DES, etc., code; not just the SSL code.  The SSL documentation
- * included with this distribution is covered by the same copyright terms
- * except that the holder is Tim Hudson (tjh@cryptsoft.com).
- * 
- * Copyright remains Eric Young's, and as such any Copyright notices in
- * the code are not to be removed.
- * If this package is used in a product, Eric Young should be given attribution
- * as the author of the parts of the library used.
- * This can be in the form of a textual message at program startup or
- * in documentation (online or textual) provided with the package.
- * 
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions
- * are met:
- * 1. Redistributions of source code must retain the copyright
- *    notice, this list of conditions and the following disclaimer.
- * 2. Redistributions in binary form must reproduce the above copyright
- *    notice, this list of conditions and the following disclaimer in the
- *    documentation and/or other materials provided with the distribution.
- * 3. All advertising materials mentioning features or use of this software
- *    must display the following acknowledgement:
- *    "This product includes cryptographic software written by
- *     Eric Young (eay@cryptsoft.com)"
- *    The word 'cryptographic' can be left out if the rouines from the library
- *    being used are not cryptographic related :-).
- * 4. If you include any Windows specific code (or a derivative thereof) from 
- *    the apps directory (application code) you must include an acknowledgement:
- *    "This product includes software written by Tim Hudson (tjh@cryptsoft.com)"
- * 
- * THIS SOFTWARE IS PROVIDED BY ERIC YOUNG ``AS IS'' AND
- * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
- * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
- * ARE DISCLAIMED.  IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE
- * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
- * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
- * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
- * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
- * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
- * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
- * SUCH DAMAGE.
- * 
- * The licence and distribution terms for any publically available version or
- * derivative of this code cannot be changed.  i.e. this code cannot simply be
- * copied and put under another distribution licence
- * [including the GNU Public Licence.]
- */
-
-/* define PART1, PART2, PART3 or PART4 to build only with a few of the options.
- * This is for machines with 64k code segment size restrictions. */
-
-#if !defined(OPENSSL_SYS_MSDOS) && (!defined(OPENSSL_SYS_VMS) || defined(__DECC)) && !defined(OPENSSL_SYS_MACOSX)
-#define TIMES
-#endif
-
-#include <stdio.h>
-
-#include <openssl/e_os2.h>
-#include OPENSSL_UNISTD_IO
-OPENSSL_DECLARE_EXIT
-
-#ifndef OPENSSL_SYS_NETWARE
-#include <signal.h>
-#endif
-
-#ifndef _IRIX
-#include <time.h>
-#endif
-#ifdef TIMES
-#include <sys/types.h>
-#include <sys/times.h>
-#endif
-
-/* Depending on the VMS version, the tms structure is perhaps defined.
-   The __TMS macro will show if it was.  If it wasn't defined, we should
-   undefine TIMES, since that tells the rest of the program how things
-   should be handled.				-- Richard Levitte */
-#if defined(OPENSSL_SYS_VMS_DECC) && !defined(__TMS)
-#undef TIMES
-#endif
-
-#ifndef TIMES
-#include <sys/timeb.h>
-#endif
-
-#if defined(sun) || defined(__ultrix)
-#define _POSIX_SOURCE
-#include <limits.h>
-#include <sys/param.h>
-#endif
-
-#include <openssl/blowfish.h>
-
-#define BF_DEFAULT_OPTIONS
-
-#undef BF_ENC
-#define BF_encrypt  BF_encrypt_normal
-#undef HEADER_BF_LOCL_H
-#include "bf_enc.c"
-
-#define BF_PTR
-#undef BF_PTR2
-#undef BF_ENC
-#undef BF_encrypt
-#define BF_encrypt  BF_encrypt_ptr
-#undef HEADER_BF_LOCL_H
-#include "bf_enc.c"
-
-#undef BF_PTR
-#define BF_PTR2
-#undef BF_ENC
-#undef BF_encrypt
-#define BF_encrypt  BF_encrypt_ptr2
-#undef HEADER_BF_LOCL_H
-#include "bf_enc.c"
-
-/* The following if from times(3) man page.  It may need to be changed */
-#ifndef HZ
-# ifndef CLK_TCK
-#  ifndef _BSD_CLK_TCK_ /* FreeBSD fix */
-#   define HZ	100.0
-#  else /* _BSD_CLK_TCK_ */
-#   define HZ ((double)_BSD_CLK_TCK_)
-#  endif
-# else /* CLK_TCK */
-#  define HZ ((double)CLK_TCK)
-# endif
-#endif
-
-#define BUFSIZE	((long)1024)
-long run=0;
-
-double Time_F(int s);
-#ifdef SIGALRM
-#if defined(__STDC__) || defined(sgi)
-#define SIGRETTYPE void
-#else
-#define SIGRETTYPE int
-#endif
-
-SIGRETTYPE sig_done(int sig);
-SIGRETTYPE sig_done(int sig)
-	{
-	signal(SIGALRM,sig_done);
-	run=0;
-#ifdef LINT
-	sig=sig;
-#endif
-	}
-#endif
-
-#define START	0
-#define STOP	1
-
-double Time_F(int s)
-	{
-	double ret;
-#ifdef TIMES
-	static struct tms tstart,tend;
-
-	if (s == START)
-		{
-		times(&tstart);
-		return(0);
-		}
-	else
-		{
-		times(&tend);
-		ret=((double)(tend.tms_utime-tstart.tms_utime))/HZ;
-		return((ret == 0.0)?1e-6:ret);
-		}
-#else /* !times() */
-	static struct timeb tstart,tend;
-	long i;
-
-	if (s == START)
-		{
-		ftime(&tstart);
-		return(0);
-		}
-	else
-		{
-		ftime(&tend);
-		i=(long)tend.millitm-(long)tstart.millitm;
-		ret=((double)(tend.time-tstart.time))+((double)i)/1000.0;
-		return((ret == 0.0)?1e-6:ret);
-		}
-#endif
-	}
-
-#ifdef SIGALRM
-#define print_name(name) fprintf(stderr,"Doing %s's for 10 seconds\n",name); alarm(10);
-#else
-#define print_name(name) fprintf(stderr,"Doing %s %ld times\n",name,cb);
-#endif
-	
-#define time_it(func,name,index) \
-	print_name(name); \
-	Time_F(START); \
-	for (count=0,run=1; COND(cb); count+=4) \
-		{ \
-		unsigned long d[2]; \
-		func(d,&sch); \
-		func(d,&sch); \
-		func(d,&sch); \
-		func(d,&sch); \
-		} \
-	tm[index]=Time_F(STOP); \
-	fprintf(stderr,"%ld %s's in %.2f second\n",count,name,tm[index]); \
-	tm[index]=((double)COUNT(cb))/tm[index];
-
-#define print_it(name,index) \
-	fprintf(stderr,"%s bytes per sec = %12.2f (%5.1fuS)\n",name, \
-		tm[index]*8,1.0e6/tm[index]);
-
-int main(int argc, char **argv)
-	{
-	long count;
-	static unsigned char buf[BUFSIZE];
-	static char key[16]={	0x12,0x34,0x56,0x78,0x9a,0xbc,0xde,0xf0,
-				0x12,0x34,0x56,0x78,0x9a,0xbc,0xde,0xf0};
-	BF_KEY sch;
-	double d,tm[16],max=0;
-	int rank[16];
-	char *str[16];
-	int max_idx=0,i,num=0,j;
-#ifndef SIGALARM
-	long ca,cb,cc,cd,ce;
-#endif
-
-	for (i=0; i<12; i++)
-		{
-		tm[i]=0.0;
-		rank[i]=0;
-		}
-
-#ifndef TIMES
-	fprintf(stderr,"To get the most accurate results, try to run this\n");
-	fprintf(stderr,"program when this computer is idle.\n");
-#endif
-
-	BF_set_key(&sch,16,key);
-
-#ifndef SIGALRM
-	fprintf(stderr,"First we calculate the approximate speed ...\n");
-	count=10;
-	do	{
-		long i;
-		unsigned long data[2];
-
-		count*=2;
-		Time_F(START);
-		for (i=count; i; i--)
-			BF_encrypt(data,&sch);
-		d=Time_F(STOP);
-		} while (d < 3.0);
-	ca=count;
-	cb=count*3;
-	cc=count*3*8/BUFSIZE+1;
-	cd=count*8/BUFSIZE+1;
-
-	ce=count/20+1;
-#define COND(d) (count != (d))
-#define COUNT(d) (d)
-#else
-#define COND(c) (run)
-#define COUNT(d) (count)
-        signal(SIGALRM,sig_done);
-        alarm(10);
-#endif
-
-	time_it(BF_encrypt_normal,	"BF_encrypt_normal ", 0);
-	time_it(BF_encrypt_ptr,		"BF_encrypt_ptr    ", 1);
-	time_it(BF_encrypt_ptr2,	"BF_encrypt_ptr2   ", 2);
-	num+=3;
-
-	str[0]="<nothing>";
-	print_it("BF_encrypt_normal ",0);
-	max=tm[0];
-	max_idx=0;
-	str[1]="ptr      ";
-	print_it("BF_encrypt_ptr ",1);
-	if (max < tm[1]) { max=tm[1]; max_idx=1; }
-	str[2]="ptr2     ";
-	print_it("BF_encrypt_ptr2 ",2);
-	if (max < tm[2]) { max=tm[2]; max_idx=2; }
-
-	printf("options    BF ecb/s\n");
-	printf("%s %12.2f 100.0%%\n",str[max_idx],tm[max_idx]);
-	d=tm[max_idx];
-	tm[max_idx]= -2.0;
-	max= -1.0;
-	for (;;)
-		{
-		for (i=0; i<3; i++)
-			{
-			if (max < tm[i]) { max=tm[i]; j=i; }
-			}
-		if (max < 0.0) break;
-		printf("%s %12.2f  %4.1f%%\n",str[j],tm[j],tm[j]/d*100.0);
-		tm[j]= -2.0;
-		max= -1.0;
-		}
-
-	switch (max_idx)
-		{
-	case 0:
-		printf("-DBF_DEFAULT_OPTIONS\n");
-		break;
-	case 1:
-		printf("-DBF_PTR\n");
-		break;
-	case 2:
-		printf("-DBF_PTR2\n");
-		break;
-		}
-	exit(0);
-#if defined(LINT) || defined(OPENSSL_SYS_MSDOS)
-	return(0);
-#endif
-	}
diff --git a/crypto/openssl/crypto/bf/bf_pi.h b/crypto/openssl/crypto/bf/bf_pi.h
deleted file mode 100644
index 9949513c6821..000000000000
--- a/crypto/openssl/crypto/bf/bf_pi.h
+++ /dev/null
@@ -1,325 +0,0 @@
-/* crypto/bf/bf_pi.h */
-/* Copyright (C) 1995-1998 Eric Young (eay@cryptsoft.com)
- * All rights reserved.
- *
- * This package is an SSL implementation written
- * by Eric Young (eay@cryptsoft.com).
- * The implementation was written so as to conform with Netscapes SSL.
- * 
- * This library is free for commercial and non-commercial use as long as
- * the following conditions are aheared to.  The following conditions
- * apply to all code found in this distribution, be it the RC4, RSA,
- * lhash, DES, etc., code; not just the SSL code.  The SSL documentation
- * included with this distribution is covered by the same copyright terms
- * except that the holder is Tim Hudson (tjh@cryptsoft.com).
- * 
- * Copyright remains Eric Young's, and as such any Copyright notices in
- * the code are not to be removed.
- * If this package is used in a product, Eric Young should be given attribution
- * as the author of the parts of the library used.
- * This can be in the form of a textual message at program startup or
- * in documentation (online or textual) provided with the package.
- * 
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions
- * are met:
- * 1. Redistributions of source code must retain the copyright
- *    notice, this list of conditions and the following disclaimer.
- * 2. Redistributions in binary form must reproduce the above copyright
- *    notice, this list of conditions and the following disclaimer in the
- *    documentation and/or other materials provided with the distribution.
- * 3. All advertising materials mentioning features or use of this software
- *    must display the following acknowledgement:
- *    "This product includes cryptographic software written by
- *     Eric Young (eay@cryptsoft.com)"
- *    The word 'cryptographic' can be left out if the rouines from the library
- *    being used are not cryptographic related :-).
- * 4. If you include any Windows specific code (or a derivative thereof) from 
- *    the apps directory (application code) you must include an acknowledgement:
- *    "This product includes software written by Tim Hudson (tjh@cryptsoft.com)"
- * 
- * THIS SOFTWARE IS PROVIDED BY ERIC YOUNG ``AS IS'' AND
- * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
- * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
- * ARE DISCLAIMED.  IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE
- * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
- * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
- * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
- * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
- * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
- * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
- * SUCH DAMAGE.
- * 
- * The licence and distribution terms for any publically available version or
- * derivative of this code cannot be changed.  i.e. this code cannot simply be
- * copied and put under another distribution licence
- * [including the GNU Public Licence.]
- */
-
-static const BF_KEY bf_init= {
-	{
-	0x243f6a88L, 0x85a308d3L, 0x13198a2eL, 0x03707344L,
-	0xa4093822L, 0x299f31d0L, 0x082efa98L, 0xec4e6c89L,
-	0x452821e6L, 0x38d01377L, 0xbe5466cfL, 0x34e90c6cL,
-	0xc0ac29b7L, 0xc97c50ddL, 0x3f84d5b5L, 0xb5470917L,
-	0x9216d5d9L, 0x8979fb1b
-	},{
-	0xd1310ba6L, 0x98dfb5acL, 0x2ffd72dbL, 0xd01adfb7L, 
-	0xb8e1afedL, 0x6a267e96L, 0xba7c9045L, 0xf12c7f99L, 
-	0x24a19947L, 0xb3916cf7L, 0x0801f2e2L, 0x858efc16L, 
-	0x636920d8L, 0x71574e69L, 0xa458fea3L, 0xf4933d7eL, 
-	0x0d95748fL, 0x728eb658L, 0x718bcd58L, 0x82154aeeL, 
-	0x7b54a41dL, 0xc25a59b5L, 0x9c30d539L, 0x2af26013L, 
-	0xc5d1b023L, 0x286085f0L, 0xca417918L, 0xb8db38efL, 
-	0x8e79dcb0L, 0x603a180eL, 0x6c9e0e8bL, 0xb01e8a3eL, 
-	0xd71577c1L, 0xbd314b27L, 0x78af2fdaL, 0x55605c60L, 
-	0xe65525f3L, 0xaa55ab94L, 0x57489862L, 0x63e81440L, 
-	0x55ca396aL, 0x2aab10b6L, 0xb4cc5c34L, 0x1141e8ceL, 
-	0xa15486afL, 0x7c72e993L, 0xb3ee1411L, 0x636fbc2aL, 
-	0x2ba9c55dL, 0x741831f6L, 0xce5c3e16L, 0x9b87931eL, 
-	0xafd6ba33L, 0x6c24cf5cL, 0x7a325381L, 0x28958677L, 
-	0x3b8f4898L, 0x6b4bb9afL, 0xc4bfe81bL, 0x66282193L, 
-	0x61d809ccL, 0xfb21a991L, 0x487cac60L, 0x5dec8032L, 
-	0xef845d5dL, 0xe98575b1L, 0xdc262302L, 0xeb651b88L, 
-	0x23893e81L, 0xd396acc5L, 0x0f6d6ff3L, 0x83f44239L, 
-	0x2e0b4482L, 0xa4842004L, 0x69c8f04aL, 0x9e1f9b5eL, 
-	0x21c66842L, 0xf6e96c9aL, 0x670c9c61L, 0xabd388f0L, 
-	0x6a51a0d2L, 0xd8542f68L, 0x960fa728L, 0xab5133a3L, 
-	0x6eef0b6cL, 0x137a3be4L, 0xba3bf050L, 0x7efb2a98L, 
-	0xa1f1651dL, 0x39af0176L, 0x66ca593eL, 0x82430e88L, 
-	0x8cee8619L, 0x456f9fb4L, 0x7d84a5c3L, 0x3b8b5ebeL, 
-	0xe06f75d8L, 0x85c12073L, 0x401a449fL, 0x56c16aa6L, 
-	0x4ed3aa62L, 0x363f7706L, 0x1bfedf72L, 0x429b023dL, 
-	0x37d0d724L, 0xd00a1248L, 0xdb0fead3L, 0x49f1c09bL, 
-	0x075372c9L, 0x80991b7bL, 0x25d479d8L, 0xf6e8def7L, 
-	0xe3fe501aL, 0xb6794c3bL, 0x976ce0bdL, 0x04c006baL, 
-	0xc1a94fb6L, 0x409f60c4L, 0x5e5c9ec2L, 0x196a2463L, 
-	0x68fb6fafL, 0x3e6c53b5L, 0x1339b2ebL, 0x3b52ec6fL, 
-	0x6dfc511fL, 0x9b30952cL, 0xcc814544L, 0xaf5ebd09L, 
-	0xbee3d004L, 0xde334afdL, 0x660f2807L, 0x192e4bb3L, 
-	0xc0cba857L, 0x45c8740fL, 0xd20b5f39L, 0xb9d3fbdbL, 
-	0x5579c0bdL, 0x1a60320aL, 0xd6a100c6L, 0x402c7279L, 
-	0x679f25feL, 0xfb1fa3ccL, 0x8ea5e9f8L, 0xdb3222f8L, 
-	0x3c7516dfL, 0xfd616b15L, 0x2f501ec8L, 0xad0552abL, 
-	0x323db5faL, 0xfd238760L, 0x53317b48L, 0x3e00df82L, 
-	0x9e5c57bbL, 0xca6f8ca0L, 0x1a87562eL, 0xdf1769dbL, 
-	0xd542a8f6L, 0x287effc3L, 0xac6732c6L, 0x8c4f5573L, 
-	0x695b27b0L, 0xbbca58c8L, 0xe1ffa35dL, 0xb8f011a0L, 
-	0x10fa3d98L, 0xfd2183b8L, 0x4afcb56cL, 0x2dd1d35bL, 
-	0x9a53e479L, 0xb6f84565L, 0xd28e49bcL, 0x4bfb9790L, 
-	0xe1ddf2daL, 0xa4cb7e33L, 0x62fb1341L, 0xcee4c6e8L, 
-	0xef20cadaL, 0x36774c01L, 0xd07e9efeL, 0x2bf11fb4L, 
-	0x95dbda4dL, 0xae909198L, 0xeaad8e71L, 0x6b93d5a0L, 
-	0xd08ed1d0L, 0xafc725e0L, 0x8e3c5b2fL, 0x8e7594b7L, 
-	0x8ff6e2fbL, 0xf2122b64L, 0x8888b812L, 0x900df01cL, 
-	0x4fad5ea0L, 0x688fc31cL, 0xd1cff191L, 0xb3a8c1adL, 
-	0x2f2f2218L, 0xbe0e1777L, 0xea752dfeL, 0x8b021fa1L, 
-	0xe5a0cc0fL, 0xb56f74e8L, 0x18acf3d6L, 0xce89e299L, 
-	0xb4a84fe0L, 0xfd13e0b7L, 0x7cc43b81L, 0xd2ada8d9L, 
-	0x165fa266L, 0x80957705L, 0x93cc7314L, 0x211a1477L, 
-	0xe6ad2065L, 0x77b5fa86L, 0xc75442f5L, 0xfb9d35cfL, 
-	0xebcdaf0cL, 0x7b3e89a0L, 0xd6411bd3L, 0xae1e7e49L, 
-	0x00250e2dL, 0x2071b35eL, 0x226800bbL, 0x57b8e0afL, 
-	0x2464369bL, 0xf009b91eL, 0x5563911dL, 0x59dfa6aaL, 
-	0x78c14389L, 0xd95a537fL, 0x207d5ba2L, 0x02e5b9c5L, 
-	0x83260376L, 0x6295cfa9L, 0x11c81968L, 0x4e734a41L, 
-	0xb3472dcaL, 0x7b14a94aL, 0x1b510052L, 0x9a532915L, 
-	0xd60f573fL, 0xbc9bc6e4L, 0x2b60a476L, 0x81e67400L, 
-	0x08ba6fb5L, 0x571be91fL, 0xf296ec6bL, 0x2a0dd915L, 
-	0xb6636521L, 0xe7b9f9b6L, 0xff34052eL, 0xc5855664L, 
-	0x53b02d5dL, 0xa99f8fa1L, 0x08ba4799L, 0x6e85076aL, 
-	0x4b7a70e9L, 0xb5b32944L, 0xdb75092eL, 0xc4192623L, 
-	0xad6ea6b0L, 0x49a7df7dL, 0x9cee60b8L, 0x8fedb266L, 
-	0xecaa8c71L, 0x699a17ffL, 0x5664526cL, 0xc2b19ee1L, 
-	0x193602a5L, 0x75094c29L, 0xa0591340L, 0xe4183a3eL, 
-	0x3f54989aL, 0x5b429d65L, 0x6b8fe4d6L, 0x99f73fd6L, 
-	0xa1d29c07L, 0xefe830f5L, 0x4d2d38e6L, 0xf0255dc1L, 
-	0x4cdd2086L, 0x8470eb26L, 0x6382e9c6L, 0x021ecc5eL, 
-	0x09686b3fL, 0x3ebaefc9L, 0x3c971814L, 0x6b6a70a1L, 
-	0x687f3584L, 0x52a0e286L, 0xb79c5305L, 0xaa500737L, 
-	0x3e07841cL, 0x7fdeae5cL, 0x8e7d44ecL, 0x5716f2b8L, 
-	0xb03ada37L, 0xf0500c0dL, 0xf01c1f04L, 0x0200b3ffL, 
-	0xae0cf51aL, 0x3cb574b2L, 0x25837a58L, 0xdc0921bdL, 
-	0xd19113f9L, 0x7ca92ff6L, 0x94324773L, 0x22f54701L, 
-	0x3ae5e581L, 0x37c2dadcL, 0xc8b57634L, 0x9af3dda7L, 
-	0xa9446146L, 0x0fd0030eL, 0xecc8c73eL, 0xa4751e41L, 
-	0xe238cd99L, 0x3bea0e2fL, 0x3280bba1L, 0x183eb331L, 
-	0x4e548b38L, 0x4f6db908L, 0x6f420d03L, 0xf60a04bfL, 
-	0x2cb81290L, 0x24977c79L, 0x5679b072L, 0xbcaf89afL, 
-	0xde9a771fL, 0xd9930810L, 0xb38bae12L, 0xdccf3f2eL, 
-	0x5512721fL, 0x2e6b7124L, 0x501adde6L, 0x9f84cd87L, 
-	0x7a584718L, 0x7408da17L, 0xbc9f9abcL, 0xe94b7d8cL, 
-	0xec7aec3aL, 0xdb851dfaL, 0x63094366L, 0xc464c3d2L, 
-	0xef1c1847L, 0x3215d908L, 0xdd433b37L, 0x24c2ba16L, 
-	0x12a14d43L, 0x2a65c451L, 0x50940002L, 0x133ae4ddL, 
-	0x71dff89eL, 0x10314e55L, 0x81ac77d6L, 0x5f11199bL, 
-	0x043556f1L, 0xd7a3c76bL, 0x3c11183bL, 0x5924a509L, 
-	0xf28fe6edL, 0x97f1fbfaL, 0x9ebabf2cL, 0x1e153c6eL, 
-	0x86e34570L, 0xeae96fb1L, 0x860e5e0aL, 0x5a3e2ab3L, 
-	0x771fe71cL, 0x4e3d06faL, 0x2965dcb9L, 0x99e71d0fL, 
-	0x803e89d6L, 0x5266c825L, 0x2e4cc978L, 0x9c10b36aL, 
-	0xc6150ebaL, 0x94e2ea78L, 0xa5fc3c53L, 0x1e0a2df4L, 
-	0xf2f74ea7L, 0x361d2b3dL, 0x1939260fL, 0x19c27960L, 
-	0x5223a708L, 0xf71312b6L, 0xebadfe6eL, 0xeac31f66L, 
-	0xe3bc4595L, 0xa67bc883L, 0xb17f37d1L, 0x018cff28L, 
-	0xc332ddefL, 0xbe6c5aa5L, 0x65582185L, 0x68ab9802L, 
-	0xeecea50fL, 0xdb2f953bL, 0x2aef7dadL, 0x5b6e2f84L, 
-	0x1521b628L, 0x29076170L, 0xecdd4775L, 0x619f1510L, 
-	0x13cca830L, 0xeb61bd96L, 0x0334fe1eL, 0xaa0363cfL, 
-	0xb5735c90L, 0x4c70a239L, 0xd59e9e0bL, 0xcbaade14L, 
-	0xeecc86bcL, 0x60622ca7L, 0x9cab5cabL, 0xb2f3846eL, 
-	0x648b1eafL, 0x19bdf0caL, 0xa02369b9L, 0x655abb50L, 
-	0x40685a32L, 0x3c2ab4b3L, 0x319ee9d5L, 0xc021b8f7L, 
-	0x9b540b19L, 0x875fa099L, 0x95f7997eL, 0x623d7da8L, 
-	0xf837889aL, 0x97e32d77L, 0x11ed935fL, 0x16681281L, 
-	0x0e358829L, 0xc7e61fd6L, 0x96dedfa1L, 0x7858ba99L, 
-	0x57f584a5L, 0x1b227263L, 0x9b83c3ffL, 0x1ac24696L, 
-	0xcdb30aebL, 0x532e3054L, 0x8fd948e4L, 0x6dbc3128L, 
-	0x58ebf2efL, 0x34c6ffeaL, 0xfe28ed61L, 0xee7c3c73L, 
-	0x5d4a14d9L, 0xe864b7e3L, 0x42105d14L, 0x203e13e0L, 
-	0x45eee2b6L, 0xa3aaabeaL, 0xdb6c4f15L, 0xfacb4fd0L, 
-	0xc742f442L, 0xef6abbb5L, 0x654f3b1dL, 0x41cd2105L, 
-	0xd81e799eL, 0x86854dc7L, 0xe44b476aL, 0x3d816250L, 
-	0xcf62a1f2L, 0x5b8d2646L, 0xfc8883a0L, 0xc1c7b6a3L, 
-	0x7f1524c3L, 0x69cb7492L, 0x47848a0bL, 0x5692b285L, 
-	0x095bbf00L, 0xad19489dL, 0x1462b174L, 0x23820e00L, 
-	0x58428d2aL, 0x0c55f5eaL, 0x1dadf43eL, 0x233f7061L, 
-	0x3372f092L, 0x8d937e41L, 0xd65fecf1L, 0x6c223bdbL, 
-	0x7cde3759L, 0xcbee7460L, 0x4085f2a7L, 0xce77326eL, 
-	0xa6078084L, 0x19f8509eL, 0xe8efd855L, 0x61d99735L, 
-	0xa969a7aaL, 0xc50c06c2L, 0x5a04abfcL, 0x800bcadcL, 
-	0x9e447a2eL, 0xc3453484L, 0xfdd56705L, 0x0e1e9ec9L, 
-	0xdb73dbd3L, 0x105588cdL, 0x675fda79L, 0xe3674340L, 
-	0xc5c43465L, 0x713e38d8L, 0x3d28f89eL, 0xf16dff20L, 
-	0x153e21e7L, 0x8fb03d4aL, 0xe6e39f2bL, 0xdb83adf7L, 
-	0xe93d5a68L, 0x948140f7L, 0xf64c261cL, 0x94692934L, 
-	0x411520f7L, 0x7602d4f7L, 0xbcf46b2eL, 0xd4a20068L, 
-	0xd4082471L, 0x3320f46aL, 0x43b7d4b7L, 0x500061afL, 
-	0x1e39f62eL, 0x97244546L, 0x14214f74L, 0xbf8b8840L, 
-	0x4d95fc1dL, 0x96b591afL, 0x70f4ddd3L, 0x66a02f45L, 
-	0xbfbc09ecL, 0x03bd9785L, 0x7fac6dd0L, 0x31cb8504L, 
-	0x96eb27b3L, 0x55fd3941L, 0xda2547e6L, 0xabca0a9aL, 
-	0x28507825L, 0x530429f4L, 0x0a2c86daL, 0xe9b66dfbL, 
-	0x68dc1462L, 0xd7486900L, 0x680ec0a4L, 0x27a18deeL, 
-	0x4f3ffea2L, 0xe887ad8cL, 0xb58ce006L, 0x7af4d6b6L, 
-	0xaace1e7cL, 0xd3375fecL, 0xce78a399L, 0x406b2a42L, 
-	0x20fe9e35L, 0xd9f385b9L, 0xee39d7abL, 0x3b124e8bL, 
-	0x1dc9faf7L, 0x4b6d1856L, 0x26a36631L, 0xeae397b2L, 
-	0x3a6efa74L, 0xdd5b4332L, 0x6841e7f7L, 0xca7820fbL, 
-	0xfb0af54eL, 0xd8feb397L, 0x454056acL, 0xba489527L, 
-	0x55533a3aL, 0x20838d87L, 0xfe6ba9b7L, 0xd096954bL, 
-	0x55a867bcL, 0xa1159a58L, 0xcca92963L, 0x99e1db33L, 
-	0xa62a4a56L, 0x3f3125f9L, 0x5ef47e1cL, 0x9029317cL, 
-	0xfdf8e802L, 0x04272f70L, 0x80bb155cL, 0x05282ce3L, 
-	0x95c11548L, 0xe4c66d22L, 0x48c1133fL, 0xc70f86dcL, 
-	0x07f9c9eeL, 0x41041f0fL, 0x404779a4L, 0x5d886e17L, 
-	0x325f51ebL, 0xd59bc0d1L, 0xf2bcc18fL, 0x41113564L, 
-	0x257b7834L, 0x602a9c60L, 0xdff8e8a3L, 0x1f636c1bL, 
-	0x0e12b4c2L, 0x02e1329eL, 0xaf664fd1L, 0xcad18115L, 
-	0x6b2395e0L, 0x333e92e1L, 0x3b240b62L, 0xeebeb922L, 
-	0x85b2a20eL, 0xe6ba0d99L, 0xde720c8cL, 0x2da2f728L, 
-	0xd0127845L, 0x95b794fdL, 0x647d0862L, 0xe7ccf5f0L, 
-	0x5449a36fL, 0x877d48faL, 0xc39dfd27L, 0xf33e8d1eL, 
-	0x0a476341L, 0x992eff74L, 0x3a6f6eabL, 0xf4f8fd37L, 
-	0xa812dc60L, 0xa1ebddf8L, 0x991be14cL, 0xdb6e6b0dL, 
-	0xc67b5510L, 0x6d672c37L, 0x2765d43bL, 0xdcd0e804L, 
-	0xf1290dc7L, 0xcc00ffa3L, 0xb5390f92L, 0x690fed0bL, 
-	0x667b9ffbL, 0xcedb7d9cL, 0xa091cf0bL, 0xd9155ea3L, 
-	0xbb132f88L, 0x515bad24L, 0x7b9479bfL, 0x763bd6ebL, 
-	0x37392eb3L, 0xcc115979L, 0x8026e297L, 0xf42e312dL, 
-	0x6842ada7L, 0xc66a2b3bL, 0x12754cccL, 0x782ef11cL, 
-	0x6a124237L, 0xb79251e7L, 0x06a1bbe6L, 0x4bfb6350L, 
-	0x1a6b1018L, 0x11caedfaL, 0x3d25bdd8L, 0xe2e1c3c9L, 
-	0x44421659L, 0x0a121386L, 0xd90cec6eL, 0xd5abea2aL, 
-	0x64af674eL, 0xda86a85fL, 0xbebfe988L, 0x64e4c3feL, 
-	0x9dbc8057L, 0xf0f7c086L, 0x60787bf8L, 0x6003604dL, 
-	0xd1fd8346L, 0xf6381fb0L, 0x7745ae04L, 0xd736fcccL, 
-	0x83426b33L, 0xf01eab71L, 0xb0804187L, 0x3c005e5fL, 
-	0x77a057beL, 0xbde8ae24L, 0x55464299L, 0xbf582e61L, 
-	0x4e58f48fL, 0xf2ddfda2L, 0xf474ef38L, 0x8789bdc2L, 
-	0x5366f9c3L, 0xc8b38e74L, 0xb475f255L, 0x46fcd9b9L, 
-	0x7aeb2661L, 0x8b1ddf84L, 0x846a0e79L, 0x915f95e2L, 
-	0x466e598eL, 0x20b45770L, 0x8cd55591L, 0xc902de4cL, 
-	0xb90bace1L, 0xbb8205d0L, 0x11a86248L, 0x7574a99eL, 
-	0xb77f19b6L, 0xe0a9dc09L, 0x662d09a1L, 0xc4324633L, 
-	0xe85a1f02L, 0x09f0be8cL, 0x4a99a025L, 0x1d6efe10L, 
-	0x1ab93d1dL, 0x0ba5a4dfL, 0xa186f20fL, 0x2868f169L, 
-	0xdcb7da83L, 0x573906feL, 0xa1e2ce9bL, 0x4fcd7f52L, 
-	0x50115e01L, 0xa70683faL, 0xa002b5c4L, 0x0de6d027L, 
-	0x9af88c27L, 0x773f8641L, 0xc3604c06L, 0x61a806b5L, 
-	0xf0177a28L, 0xc0f586e0L, 0x006058aaL, 0x30dc7d62L, 
-	0x11e69ed7L, 0x2338ea63L, 0x53c2dd94L, 0xc2c21634L, 
-	0xbbcbee56L, 0x90bcb6deL, 0xebfc7da1L, 0xce591d76L, 
-	0x6f05e409L, 0x4b7c0188L, 0x39720a3dL, 0x7c927c24L, 
-	0x86e3725fL, 0x724d9db9L, 0x1ac15bb4L, 0xd39eb8fcL, 
-	0xed545578L, 0x08fca5b5L, 0xd83d7cd3L, 0x4dad0fc4L, 
-	0x1e50ef5eL, 0xb161e6f8L, 0xa28514d9L, 0x6c51133cL, 
-	0x6fd5c7e7L, 0x56e14ec4L, 0x362abfceL, 0xddc6c837L, 
-	0xd79a3234L, 0x92638212L, 0x670efa8eL, 0x406000e0L, 
-	0x3a39ce37L, 0xd3faf5cfL, 0xabc27737L, 0x5ac52d1bL, 
-	0x5cb0679eL, 0x4fa33742L, 0xd3822740L, 0x99bc9bbeL, 
-	0xd5118e9dL, 0xbf0f7315L, 0xd62d1c7eL, 0xc700c47bL, 
-	0xb78c1b6bL, 0x21a19045L, 0xb26eb1beL, 0x6a366eb4L, 
-	0x5748ab2fL, 0xbc946e79L, 0xc6a376d2L, 0x6549c2c8L, 
-	0x530ff8eeL, 0x468dde7dL, 0xd5730a1dL, 0x4cd04dc6L, 
-	0x2939bbdbL, 0xa9ba4650L, 0xac9526e8L, 0xbe5ee304L, 
-	0xa1fad5f0L, 0x6a2d519aL, 0x63ef8ce2L, 0x9a86ee22L, 
-	0xc089c2b8L, 0x43242ef6L, 0xa51e03aaL, 0x9cf2d0a4L, 
-	0x83c061baL, 0x9be96a4dL, 0x8fe51550L, 0xba645bd6L, 
-	0x2826a2f9L, 0xa73a3ae1L, 0x4ba99586L, 0xef5562e9L, 
-	0xc72fefd3L, 0xf752f7daL, 0x3f046f69L, 0x77fa0a59L, 
-	0x80e4a915L, 0x87b08601L, 0x9b09e6adL, 0x3b3ee593L, 
-	0xe990fd5aL, 0x9e34d797L, 0x2cf0b7d9L, 0x022b8b51L, 
-	0x96d5ac3aL, 0x017da67dL, 0xd1cf3ed6L, 0x7c7d2d28L, 
-	0x1f9f25cfL, 0xadf2b89bL, 0x5ad6b472L, 0x5a88f54cL, 
-	0xe029ac71L, 0xe019a5e6L, 0x47b0acfdL, 0xed93fa9bL, 
-	0xe8d3c48dL, 0x283b57ccL, 0xf8d56629L, 0x79132e28L, 
-	0x785f0191L, 0xed756055L, 0xf7960e44L, 0xe3d35e8cL, 
-	0x15056dd4L, 0x88f46dbaL, 0x03a16125L, 0x0564f0bdL, 
-	0xc3eb9e15L, 0x3c9057a2L, 0x97271aecL, 0xa93a072aL, 
-	0x1b3f6d9bL, 0x1e6321f5L, 0xf59c66fbL, 0x26dcf319L, 
-	0x7533d928L, 0xb155fdf5L, 0x03563482L, 0x8aba3cbbL, 
-	0x28517711L, 0xc20ad9f8L, 0xabcc5167L, 0xccad925fL, 
-	0x4de81751L, 0x3830dc8eL, 0x379d5862L, 0x9320f991L, 
-	0xea7a90c2L, 0xfb3e7bceL, 0x5121ce64L, 0x774fbe32L, 
-	0xa8b6e37eL, 0xc3293d46L, 0x48de5369L, 0x6413e680L, 
-	0xa2ae0810L, 0xdd6db224L, 0x69852dfdL, 0x09072166L, 
-	0xb39a460aL, 0x6445c0ddL, 0x586cdecfL, 0x1c20c8aeL, 
-	0x5bbef7ddL, 0x1b588d40L, 0xccd2017fL, 0x6bb4e3bbL, 
-	0xdda26a7eL, 0x3a59ff45L, 0x3e350a44L, 0xbcb4cdd5L, 
-	0x72eacea8L, 0xfa6484bbL, 0x8d6612aeL, 0xbf3c6f47L, 
-	0xd29be463L, 0x542f5d9eL, 0xaec2771bL, 0xf64e6370L, 
-	0x740e0d8dL, 0xe75b1357L, 0xf8721671L, 0xaf537d5dL, 
-	0x4040cb08L, 0x4eb4e2ccL, 0x34d2466aL, 0x0115af84L, 
-	0xe1b00428L, 0x95983a1dL, 0x06b89fb4L, 0xce6ea048L, 
-	0x6f3f3b82L, 0x3520ab82L, 0x011a1d4bL, 0x277227f8L, 
-	0x611560b1L, 0xe7933fdcL, 0xbb3a792bL, 0x344525bdL, 
-	0xa08839e1L, 0x51ce794bL, 0x2f32c9b7L, 0xa01fbac9L, 
-	0xe01cc87eL, 0xbcc7d1f6L, 0xcf0111c3L, 0xa1e8aac7L, 
-	0x1a908749L, 0xd44fbd9aL, 0xd0dadecbL, 0xd50ada38L, 
-	0x0339c32aL, 0xc6913667L, 0x8df9317cL, 0xe0b12b4fL, 
-	0xf79e59b7L, 0x43f5bb3aL, 0xf2d519ffL, 0x27d9459cL, 
-	0xbf97222cL, 0x15e6fc2aL, 0x0f91fc71L, 0x9b941525L, 
-	0xfae59361L, 0xceb69cebL, 0xc2a86459L, 0x12baa8d1L, 
-	0xb6c1075eL, 0xe3056a0cL, 0x10d25065L, 0xcb03a442L, 
-	0xe0ec6e0eL, 0x1698db3bL, 0x4c98a0beL, 0x3278e964L, 
-	0x9f1f9532L, 0xe0d392dfL, 0xd3a0342bL, 0x8971f21eL, 
-	0x1b0a7441L, 0x4ba3348cL, 0xc5be7120L, 0xc37632d8L, 
-	0xdf359f8dL, 0x9b992f2eL, 0xe60b6f47L, 0x0fe3f11dL, 
-	0xe54cda54L, 0x1edad891L, 0xce6279cfL, 0xcd3e7e6fL, 
-	0x1618b166L, 0xfd2c1d05L, 0x848fd2c5L, 0xf6fb2299L, 
-	0xf523f357L, 0xa6327623L, 0x93a83531L, 0x56cccd02L, 
-	0xacf08162L, 0x5a75ebb5L, 0x6e163697L, 0x88d273ccL, 
-	0xde966292L, 0x81b949d0L, 0x4c50901bL, 0x71c65614L, 
-	0xe6c6c7bdL, 0x327a140aL, 0x45e1d006L, 0xc3f27b9aL, 
-	0xc9aa53fdL, 0x62a80f00L, 0xbb25bfe2L, 0x35bdd2f6L, 
-	0x71126905L, 0xb2040222L, 0xb6cbcf7cL, 0xcd769c2bL, 
-	0x53113ec0L, 0x1640e3d3L, 0x38abbd60L, 0x2547adf0L, 
-	0xba38209cL, 0xf746ce76L, 0x77afa1c5L, 0x20756060L, 
-	0x85cbfe4eL, 0x8ae88dd8L, 0x7aaaf9b0L, 0x4cf9aa7eL, 
-	0x1948c25cL, 0x02fb8a8cL, 0x01c36ae4L, 0xd6ebe1f9L, 
-	0x90d4f869L, 0xa65cdea0L, 0x3f09252dL, 0xc208e69fL, 
-	0xb74e6132L, 0xce77e25bL, 0x578fdfe3L, 0x3ac372e6L, 
-	}
-	};
-
diff --git a/crypto/openssl/crypto/bf/bf_skey.c b/crypto/openssl/crypto/bf/bf_skey.c
deleted file mode 100644
index 3673cdee6e26..000000000000
--- a/crypto/openssl/crypto/bf/bf_skey.c
+++ /dev/null
@@ -1,116 +0,0 @@
-/* crypto/bf/bf_skey.c */
-/* Copyright (C) 1995-1998 Eric Young (eay@cryptsoft.com)
- * All rights reserved.
- *
- * This package is an SSL implementation written
- * by Eric Young (eay@cryptsoft.com).
- * The implementation was written so as to conform with Netscapes SSL.
- * 
- * This library is free for commercial and non-commercial use as long as
- * the following conditions are aheared to.  The following conditions
- * apply to all code found in this distribution, be it the RC4, RSA,
- * lhash, DES, etc., code; not just the SSL code.  The SSL documentation
- * included with this distribution is covered by the same copyright terms
- * except that the holder is Tim Hudson (tjh@cryptsoft.com).
- * 
- * Copyright remains Eric Young's, and as such any Copyright notices in
- * the code are not to be removed.
- * If this package is used in a product, Eric Young should be given attribution
- * as the author of the parts of the library used.
- * This can be in the form of a textual message at program startup or
- * in documentation (online or textual) provided with the package.
- * 
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions
- * are met:
- * 1. Redistributions of source code must retain the copyright
- *    notice, this list of conditions and the following disclaimer.
- * 2. Redistributions in binary form must reproduce the above copyright
- *    notice, this list of conditions and the following disclaimer in the
- *    documentation and/or other materials provided with the distribution.
- * 3. All advertising materials mentioning features or use of this software
- *    must display the following acknowledgement:
- *    "This product includes cryptographic software written by
- *     Eric Young (eay@cryptsoft.com)"
- *    The word 'cryptographic' can be left out if the rouines from the library
- *    being used are not cryptographic related :-).
- * 4. If you include any Windows specific code (or a derivative thereof) from 
- *    the apps directory (application code) you must include an acknowledgement:
- *    "This product includes software written by Tim Hudson (tjh@cryptsoft.com)"
- * 
- * THIS SOFTWARE IS PROVIDED BY ERIC YOUNG ``AS IS'' AND
- * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
- * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
- * ARE DISCLAIMED.  IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE
- * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
- * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
- * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
- * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
- * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
- * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
- * SUCH DAMAGE.
- * 
- * The licence and distribution terms for any publically available version or
- * derivative of this code cannot be changed.  i.e. this code cannot simply be
- * copied and put under another distribution licence
- * [including the GNU Public Licence.]
- */
-
-#include <stdio.h>
-#include <string.h>
-#include <openssl/blowfish.h>
-#include "bf_locl.h"
-#include "bf_pi.h"
-
-void BF_set_key(BF_KEY *key, int len, const unsigned char *data)
-	{
-	int i;
-	BF_LONG *p,ri,in[2];
-	const unsigned char *d,*end;
-
-
-	memcpy(key,&bf_init,sizeof(BF_KEY));
-	p=key->P;
-
-	if (len > ((BF_ROUNDS+2)*4)) len=(BF_ROUNDS+2)*4;
-
-	d=data;
-	end= &(data[len]);
-	for (i=0; i<(BF_ROUNDS+2); i++)
-		{
-		ri= *(d++);
-		if (d >= end) d=data;
-
-		ri<<=8;
-		ri|= *(d++);
-		if (d >= end) d=data;
-
-		ri<<=8;
-		ri|= *(d++);
-		if (d >= end) d=data;
-
-		ri<<=8;
-		ri|= *(d++);
-		if (d >= end) d=data;
-
-		p[i]^=ri;
-		}
-
-	in[0]=0L;
-	in[1]=0L;
-	for (i=0; i<(BF_ROUNDS+2); i+=2)
-		{
-		BF_encrypt(in,key);
-		p[i  ]=in[0];
-		p[i+1]=in[1];
-		}
-
-	p=key->S;
-	for (i=0; i<4*256; i+=2)
-		{
-		BF_encrypt(in,key);
-		p[i  ]=in[0];
-		p[i+1]=in[1];
-		}
-	}
-
diff --git a/crypto/openssl/crypto/bf/bfs.cpp b/crypto/openssl/crypto/bf/bfs.cpp
deleted file mode 100644
index d74c45776078..000000000000
--- a/crypto/openssl/crypto/bf/bfs.cpp
+++ /dev/null
@@ -1,67 +0,0 @@
-//
-// gettsc.inl
-//
-// gives access to the Pentium's (secret) cycle counter
-//
-// This software was written by Leonard Janke (janke@unixg.ubc.ca)
-// in 1996-7 and is entered, by him, into the public domain.
-
-#if defined(__WATCOMC__)
-void GetTSC(unsigned long&);
-#pragma aux GetTSC = 0x0f 0x31 "mov [edi], eax" parm [edi] modify [edx eax];
-#elif defined(__GNUC__)
-inline
-void GetTSC(unsigned long& tsc)
-{
-  asm volatile(".byte 15, 49\n\t"
-	       : "=eax" (tsc)
-	       :
-	       : "%edx", "%eax");
-}
-#elif defined(_MSC_VER)
-inline
-void GetTSC(unsigned long& tsc)
-{
-  unsigned long a;
-  __asm _emit 0fh
-  __asm _emit 31h
-  __asm mov a, eax;
-  tsc=a;
-}
-#endif      
-
-#include <stdio.h>
-#include <stdlib.h>
-#include <openssl/blowfish.h>
-
-void main(int argc,char *argv[])
-	{
-	BF_KEY key;
-	unsigned long s1,s2,e1,e2;
-	unsigned long data[2];
-	int i,j;
-
-	for (j=0; j<6; j++)
-		{
-		for (i=0; i<1000; i++) /**/
-			{
-			BF_encrypt(&data[0],&key);
-			GetTSC(s1);
-			BF_encrypt(&data[0],&key);
-			BF_encrypt(&data[0],&key);
-			BF_encrypt(&data[0],&key);
-			GetTSC(e1);
-			GetTSC(s2);
-			BF_encrypt(&data[0],&key);
-			BF_encrypt(&data[0],&key);
-			BF_encrypt(&data[0],&key);
-			BF_encrypt(&data[0],&key);
-			GetTSC(e2);
-			BF_encrypt(&data[0],&key);
-			}
-
-		printf("blowfish %d %d (%d)\n",
-			e1-s1,e2-s2,((e2-s2)-(e1-s1)));
-		}
-	}
-
diff --git a/crypto/openssl/crypto/bf/bfspeed.c b/crypto/openssl/crypto/bf/bfspeed.c
deleted file mode 100644
index c41ef3b4035b..000000000000
--- a/crypto/openssl/crypto/bf/bfspeed.c
+++ /dev/null
@@ -1,277 +0,0 @@
-/* crypto/bf/bfspeed.c */
-/* Copyright (C) 1995-1998 Eric Young (eay@cryptsoft.com)
- * All rights reserved.
- *
- * This package is an SSL implementation written
- * by Eric Young (eay@cryptsoft.com).
- * The implementation was written so as to conform with Netscapes SSL.
- * 
- * This library is free for commercial and non-commercial use as long as
- * the following conditions are aheared to.  The following conditions
- * apply to all code found in this distribution, be it the RC4, RSA,
- * lhash, DES, etc., code; not just the SSL code.  The SSL documentation
- * included with this distribution is covered by the same copyright terms
- * except that the holder is Tim Hudson (tjh@cryptsoft.com).
- * 
- * Copyright remains Eric Young's, and as such any Copyright notices in
- * the code are not to be removed.
- * If this package is used in a product, Eric Young should be given attribution
- * as the author of the parts of the library used.
- * This can be in the form of a textual message at program startup or
- * in documentation (online or textual) provided with the package.
- * 
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions
- * are met:
- * 1. Redistributions of source code must retain the copyright
- *    notice, this list of conditions and the following disclaimer.
- * 2. Redistributions in binary form must reproduce the above copyright
- *    notice, this list of conditions and the following disclaimer in the
- *    documentation and/or other materials provided with the distribution.
- * 3. All advertising materials mentioning features or use of this software
- *    must display the following acknowledgement:
- *    "This product includes cryptographic software written by
- *     Eric Young (eay@cryptsoft.com)"
- *    The word 'cryptographic' can be left out if the rouines from the library
- *    being used are not cryptographic related :-).
- * 4. If you include any Windows specific code (or a derivative thereof) from 
- *    the apps directory (application code) you must include an acknowledgement:
- *    "This product includes software written by Tim Hudson (tjh@cryptsoft.com)"
- * 
- * THIS SOFTWARE IS PROVIDED BY ERIC YOUNG ``AS IS'' AND
- * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
- * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
- * ARE DISCLAIMED.  IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE
- * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
- * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
- * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
- * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
- * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
- * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
- * SUCH DAMAGE.
- * 
- * The licence and distribution terms for any publically available version or
- * derivative of this code cannot be changed.  i.e. this code cannot simply be
- * copied and put under another distribution licence
- * [including the GNU Public Licence.]
- */
-
-/* 11-Sep-92 Andrew Daviel   Support for Silicon Graphics IRIX added */
-/* 06-Apr-92 Luke Brennan    Support for VMS and add extra signal calls */
-
-#if !defined(OPENSSL_SYS_MSDOS) && (!defined(OPENSSL_SYS_VMS) || defined(__DECC)) && !defined(OPENSSL_SYS_MACOSX)
-#define TIMES
-#endif
-
-#include <stdio.h>
-
-#include <openssl/e_os2.h>
-#include OPENSSL_UNISTD_IO
-OPENSSL_DECLARE_EXIT
-
-#ifndef OPENSSL_SYS_NETWARE
-#include <signal.h>
-#endif
-
-#ifndef _IRIX
-#include <time.h>
-#endif
-#ifdef TIMES
-#include <sys/types.h>
-#include <sys/times.h>
-#endif
-
-/* Depending on the VMS version, the tms structure is perhaps defined.
-   The __TMS macro will show if it was.  If it wasn't defined, we should
-   undefine TIMES, since that tells the rest of the program how things
-   should be handled.				-- Richard Levitte */
-#if defined(OPENSSL_SYS_VMS_DECC) && !defined(__TMS)
-#undef TIMES
-#endif
-
-#ifndef TIMES
-#include <sys/timeb.h>
-#endif
-
-#if defined(sun) || defined(__ultrix)
-#define _POSIX_SOURCE
-#include <limits.h>
-#include <sys/param.h>
-#endif
-
-#include <openssl/blowfish.h>
-
-/* The following if from times(3) man page.  It may need to be changed */
-#ifndef HZ
-#ifndef CLK_TCK
-#define HZ	100.0
-#else /* CLK_TCK */
-#define HZ ((double)CLK_TCK)
-#endif
-#endif
-
-#define BUFSIZE	((long)1024)
-long run=0;
-
-double Time_F(int s);
-#ifdef SIGALRM
-#if defined(__STDC__) || defined(sgi) || defined(_AIX)
-#define SIGRETTYPE void
-#else
-#define SIGRETTYPE int
-#endif
-
-SIGRETTYPE sig_done(int sig);
-SIGRETTYPE sig_done(int sig)
-	{
-	signal(SIGALRM,sig_done);
-	run=0;
-#ifdef LINT
-	sig=sig;
-#endif
-	}
-#endif
-
-#define START	0
-#define STOP	1
-
-double Time_F(int s)
-	{
-	double ret;
-#ifdef TIMES
-	static struct tms tstart,tend;
-
-	if (s == START)
-		{
-		times(&tstart);
-		return(0);
-		}
-	else
-		{
-		times(&tend);
-		ret=((double)(tend.tms_utime-tstart.tms_utime))/HZ;
-		return((ret == 0.0)?1e-6:ret);
-		}
-#else /* !times() */
-	static struct timeb tstart,tend;
-	long i;
-
-	if (s == START)
-		{
-		ftime(&tstart);
-		return(0);
-		}
-	else
-		{
-		ftime(&tend);
-		i=(long)tend.millitm-(long)tstart.millitm;
-		ret=((double)(tend.time-tstart.time))+((double)i)/1e3;
-		return((ret == 0.0)?1e-6:ret);
-		}
-#endif
-	}
-
-int main(int argc, char **argv)
-	{
-	long count;
-	static unsigned char buf[BUFSIZE];
-	static unsigned char key[] ={
-			0x12,0x34,0x56,0x78,0x9a,0xbc,0xde,0xf0,
-			0xfe,0xdc,0xba,0x98,0x76,0x54,0x32,0x10,
-			};
-	BF_KEY sch;
-	double a,b,c,d;
-#ifndef SIGALRM
-	long ca,cb,cc;
-#endif
-
-#ifndef TIMES
-	printf("To get the most accurate results, try to run this\n");
-	printf("program when this computer is idle.\n");
-#endif
-
-#ifndef SIGALRM
-	printf("First we calculate the approximate speed ...\n");
-	BF_set_key(&sch,16,key);
-	count=10;
-	do	{
-		long i;
-		BF_LONG data[2];
-
-		count*=2;
-		Time_F(START);
-		for (i=count; i; i--)
-			BF_encrypt(data,&sch);
-		d=Time_F(STOP);
-		} while (d < 3.0);
-	ca=count/512;
-	cb=count;
-	cc=count*8/BUFSIZE+1;
-	printf("Doing BF_set_key %ld times\n",ca);
-#define COND(d)	(count != (d))
-#define COUNT(d) (d)
-#else
-#define COND(c)	(run)
-#define COUNT(d) (count)
-	signal(SIGALRM,sig_done);
-	printf("Doing BF_set_key for 10 seconds\n");
-	alarm(10);
-#endif
-
-	Time_F(START);
-	for (count=0,run=1; COND(ca); count+=4)
-		{
-		BF_set_key(&sch,16,key);
-		BF_set_key(&sch,16,key);
-		BF_set_key(&sch,16,key);
-		BF_set_key(&sch,16,key);
-		}
-	d=Time_F(STOP);
-	printf("%ld BF_set_key's in %.2f seconds\n",count,d);
-	a=((double)COUNT(ca))/d;
-
-#ifdef SIGALRM
-	printf("Doing BF_encrypt's for 10 seconds\n");
-	alarm(10);
-#else
-	printf("Doing BF_encrypt %ld times\n",cb);
-#endif
-	Time_F(START);
-	for (count=0,run=1; COND(cb); count+=4)
-		{
-		BF_LONG data[2];
-
-		BF_encrypt(data,&sch);
-		BF_encrypt(data,&sch);
-		BF_encrypt(data,&sch);
-		BF_encrypt(data,&sch);
-		}
-	d=Time_F(STOP);
-	printf("%ld BF_encrypt's in %.2f second\n",count,d);
-	b=((double)COUNT(cb)*8)/d;
-
-#ifdef SIGALRM
-	printf("Doing BF_cbc_encrypt on %ld byte blocks for 10 seconds\n",
-		BUFSIZE);
-	alarm(10);
-#else
-	printf("Doing BF_cbc_encrypt %ld times on %ld byte blocks\n",cc,
-		BUFSIZE);
-#endif
-	Time_F(START);
-	for (count=0,run=1; COND(cc); count++)
-		BF_cbc_encrypt(buf,buf,BUFSIZE,&sch,
-			&(key[0]),BF_ENCRYPT);
-	d=Time_F(STOP);
-	printf("%ld BF_cbc_encrypt's of %ld byte blocks in %.2f second\n",
-		count,BUFSIZE,d);
-	c=((double)COUNT(cc)*BUFSIZE)/d;
-
-	printf("Blowfish set_key       per sec = %12.3f (%9.3fuS)\n",a,1.0e6/a);
-	printf("Blowfish raw ecb bytes per sec = %12.3f (%9.3fuS)\n",b,8.0e6/b);
-	printf("Blowfish cbc     bytes per sec = %12.3f (%9.3fuS)\n",c,8.0e6/c);
-	exit(0);
-#if defined(LINT) || defined(OPENSSL_SYS_MSDOS)
-	return(0);
-#endif
-	}
diff --git a/crypto/openssl/crypto/bf/bftest.c b/crypto/openssl/crypto/bf/bftest.c
deleted file mode 100644
index 97e6634d37f0..000000000000
--- a/crypto/openssl/crypto/bf/bftest.c
+++ /dev/null
@@ -1,540 +0,0 @@
-/* crypto/bf/bftest.c */
-/* Copyright (C) 1995-1998 Eric Young (eay@cryptsoft.com)
- * All rights reserved.
- *
- * This package is an SSL implementation written
- * by Eric Young (eay@cryptsoft.com).
- * The implementation was written so as to conform with Netscapes SSL.
- * 
- * This library is free for commercial and non-commercial use as long as
- * the following conditions are aheared to.  The following conditions
- * apply to all code found in this distribution, be it the RC4, RSA,
- * lhash, DES, etc., code; not just the SSL code.  The SSL documentation
- * included with this distribution is covered by the same copyright terms
- * except that the holder is Tim Hudson (tjh@cryptsoft.com).
- * 
- * Copyright remains Eric Young's, and as such any Copyright notices in
- * the code are not to be removed.
- * If this package is used in a product, Eric Young should be given attribution
- * as the author of the parts of the library used.
- * This can be in the form of a textual message at program startup or
- * in documentation (online or textual) provided with the package.
- * 
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions
- * are met:
- * 1. Redistributions of source code must retain the copyright
- *    notice, this list of conditions and the following disclaimer.
- * 2. Redistributions in binary form must reproduce the above copyright
- *    notice, this list of conditions and the following disclaimer in the
- *    documentation and/or other materials provided with the distribution.
- * 3. All advertising materials mentioning features or use of this software
- *    must display the following acknowledgement:
- *    "This product includes cryptographic software written by
- *     Eric Young (eay@cryptsoft.com)"
- *    The word 'cryptographic' can be left out if the rouines from the library
- *    being used are not cryptographic related :-).
- * 4. If you include any Windows specific code (or a derivative thereof) from 
- *    the apps directory (application code) you must include an acknowledgement:
- *    "This product includes software written by Tim Hudson (tjh@cryptsoft.com)"
- * 
- * THIS SOFTWARE IS PROVIDED BY ERIC YOUNG ``AS IS'' AND
- * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
- * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
- * ARE DISCLAIMED.  IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE
- * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
- * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
- * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
- * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
- * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
- * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
- * SUCH DAMAGE.
- * 
- * The licence and distribution terms for any publically available version or
- * derivative of this code cannot be changed.  i.e. this code cannot simply be
- * copied and put under another distribution licence
- * [including the GNU Public Licence.]
- */
-
-/* This has been a quickly hacked 'ideatest.c'.  When I add tests for other
- * RC2 modes, more of the code will be uncommented. */
-
-#include <stdio.h>
-#include <string.h>
-#include <stdlib.h>
-#include <openssl/opensslconf.h> /* To see if OPENSSL_NO_BF is defined */
-
-#include "../e_os.h"
-
-#ifdef OPENSSL_NO_BF
-int main(int argc, char *argv[])
-{
-    printf("No BF support\n");
-    return(0);
-}
-#else
-#include <openssl/blowfish.h>
-
-#ifdef CHARSET_EBCDIC
-#include <openssl/ebcdic.h>
-#endif
-
-static char *bf_key[2]={
-	"abcdefghijklmnopqrstuvwxyz",
-	"Who is John Galt?"
-	};
-
-/* big endian */
-static BF_LONG bf_plain[2][2]={
-	{0x424c4f57L,0x46495348L},
-	{0xfedcba98L,0x76543210L}
-	};
-
-static BF_LONG bf_cipher[2][2]={
-	{0x324ed0feL,0xf413a203L},
-	{0xcc91732bL,0x8022f684L}
-	};
-/************/
-
-/* Lets use the DES test vectors :-) */
-#define NUM_TESTS 34
-static unsigned char ecb_data[NUM_TESTS][8]={
-	{0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00},
-	{0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF},
-	{0x30,0x00,0x00,0x00,0x00,0x00,0x00,0x00},
-	{0x11,0x11,0x11,0x11,0x11,0x11,0x11,0x11},
-	{0x01,0x23,0x45,0x67,0x89,0xAB,0xCD,0xEF},
-	{0x11,0x11,0x11,0x11,0x11,0x11,0x11,0x11},
-	{0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00},
-	{0xFE,0xDC,0xBA,0x98,0x76,0x54,0x32,0x10},
-	{0x7C,0xA1,0x10,0x45,0x4A,0x1A,0x6E,0x57},
-	{0x01,0x31,0xD9,0x61,0x9D,0xC1,0x37,0x6E},
-	{0x07,0xA1,0x13,0x3E,0x4A,0x0B,0x26,0x86},
-	{0x38,0x49,0x67,0x4C,0x26,0x02,0x31,0x9E},
-	{0x04,0xB9,0x15,0xBA,0x43,0xFE,0xB5,0xB6},
-	{0x01,0x13,0xB9,0x70,0xFD,0x34,0xF2,0xCE},
-	{0x01,0x70,0xF1,0x75,0x46,0x8F,0xB5,0xE6},
-	{0x43,0x29,0x7F,0xAD,0x38,0xE3,0x73,0xFE},
-	{0x07,0xA7,0x13,0x70,0x45,0xDA,0x2A,0x16},
-	{0x04,0x68,0x91,0x04,0xC2,0xFD,0x3B,0x2F},
-	{0x37,0xD0,0x6B,0xB5,0x16,0xCB,0x75,0x46},
-	{0x1F,0x08,0x26,0x0D,0x1A,0xC2,0x46,0x5E},
-	{0x58,0x40,0x23,0x64,0x1A,0xBA,0x61,0x76},
-	{0x02,0x58,0x16,0x16,0x46,0x29,0xB0,0x07},
-	{0x49,0x79,0x3E,0xBC,0x79,0xB3,0x25,0x8F},
-	{0x4F,0xB0,0x5E,0x15,0x15,0xAB,0x73,0xA7},
-	{0x49,0xE9,0x5D,0x6D,0x4C,0xA2,0x29,0xBF},
-	{0x01,0x83,0x10,0xDC,0x40,0x9B,0x26,0xD6},
-	{0x1C,0x58,0x7F,0x1C,0x13,0x92,0x4F,0xEF},
-	{0x01,0x01,0x01,0x01,0x01,0x01,0x01,0x01},
-	{0x1F,0x1F,0x1F,0x1F,0x0E,0x0E,0x0E,0x0E},
-	{0xE0,0xFE,0xE0,0xFE,0xF1,0xFE,0xF1,0xFE},
-	{0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00},
-	{0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF},
-	{0x01,0x23,0x45,0x67,0x89,0xAB,0xCD,0xEF},
-	{0xFE,0xDC,0xBA,0x98,0x76,0x54,0x32,0x10}};
-
-static unsigned char plain_data[NUM_TESTS][8]={
-	{0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00},
-	{0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF},
-	{0x10,0x00,0x00,0x00,0x00,0x00,0x00,0x01},
-	{0x11,0x11,0x11,0x11,0x11,0x11,0x11,0x11},
-	{0x11,0x11,0x11,0x11,0x11,0x11,0x11,0x11},
-	{0x01,0x23,0x45,0x67,0x89,0xAB,0xCD,0xEF},
-	{0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00},
-	{0x01,0x23,0x45,0x67,0x89,0xAB,0xCD,0xEF},
-	{0x01,0xA1,0xD6,0xD0,0x39,0x77,0x67,0x42},
-	{0x5C,0xD5,0x4C,0xA8,0x3D,0xEF,0x57,0xDA},
-	{0x02,0x48,0xD4,0x38,0x06,0xF6,0x71,0x72},
-	{0x51,0x45,0x4B,0x58,0x2D,0xDF,0x44,0x0A},
-	{0x42,0xFD,0x44,0x30,0x59,0x57,0x7F,0xA2},
-	{0x05,0x9B,0x5E,0x08,0x51,0xCF,0x14,0x3A},
-	{0x07,0x56,0xD8,0xE0,0x77,0x47,0x61,0xD2},
-	{0x76,0x25,0x14,0xB8,0x29,0xBF,0x48,0x6A},
-	{0x3B,0xDD,0x11,0x90,0x49,0x37,0x28,0x02},
-	{0x26,0x95,0x5F,0x68,0x35,0xAF,0x60,0x9A},
-	{0x16,0x4D,0x5E,0x40,0x4F,0x27,0x52,0x32},
-	{0x6B,0x05,0x6E,0x18,0x75,0x9F,0x5C,0xCA},
-	{0x00,0x4B,0xD6,0xEF,0x09,0x17,0x60,0x62},
-	{0x48,0x0D,0x39,0x00,0x6E,0xE7,0x62,0xF2},
-	{0x43,0x75,0x40,0xC8,0x69,0x8F,0x3C,0xFA},
-	{0x07,0x2D,0x43,0xA0,0x77,0x07,0x52,0x92},
-	{0x02,0xFE,0x55,0x77,0x81,0x17,0xF1,0x2A},
-	{0x1D,0x9D,0x5C,0x50,0x18,0xF7,0x28,0xC2},
-	{0x30,0x55,0x32,0x28,0x6D,0x6F,0x29,0x5A},
-	{0x01,0x23,0x45,0x67,0x89,0xAB,0xCD,0xEF},
-	{0x01,0x23,0x45,0x67,0x89,0xAB,0xCD,0xEF},
-	{0x01,0x23,0x45,0x67,0x89,0xAB,0xCD,0xEF},
-	{0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF},
-	{0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00},
-	{0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00},
-	{0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF}};
-
-static unsigned char cipher_data[NUM_TESTS][8]={
-	{0x4E,0xF9,0x97,0x45,0x61,0x98,0xDD,0x78},
-	{0x51,0x86,0x6F,0xD5,0xB8,0x5E,0xCB,0x8A},
-	{0x7D,0x85,0x6F,0x9A,0x61,0x30,0x63,0xF2},
-	{0x24,0x66,0xDD,0x87,0x8B,0x96,0x3C,0x9D},
-	{0x61,0xF9,0xC3,0x80,0x22,0x81,0xB0,0x96},
-	{0x7D,0x0C,0xC6,0x30,0xAF,0xDA,0x1E,0xC7},
-	{0x4E,0xF9,0x97,0x45,0x61,0x98,0xDD,0x78},
-	{0x0A,0xCE,0xAB,0x0F,0xC6,0xA0,0xA2,0x8D},
-	{0x59,0xC6,0x82,0x45,0xEB,0x05,0x28,0x2B},
-	{0xB1,0xB8,0xCC,0x0B,0x25,0x0F,0x09,0xA0},
-	{0x17,0x30,0xE5,0x77,0x8B,0xEA,0x1D,0xA4},
-	{0xA2,0x5E,0x78,0x56,0xCF,0x26,0x51,0xEB},
-	{0x35,0x38,0x82,0xB1,0x09,0xCE,0x8F,0x1A},
-	{0x48,0xF4,0xD0,0x88,0x4C,0x37,0x99,0x18},
-	{0x43,0x21,0x93,0xB7,0x89,0x51,0xFC,0x98},
-	{0x13,0xF0,0x41,0x54,0xD6,0x9D,0x1A,0xE5},
-	{0x2E,0xED,0xDA,0x93,0xFF,0xD3,0x9C,0x79},
-	{0xD8,0x87,0xE0,0x39,0x3C,0x2D,0xA6,0xE3},
-	{0x5F,0x99,0xD0,0x4F,0x5B,0x16,0x39,0x69},
-	{0x4A,0x05,0x7A,0x3B,0x24,0xD3,0x97,0x7B},
-	{0x45,0x20,0x31,0xC1,0xE4,0xFA,0xDA,0x8E},
-	{0x75,0x55,0xAE,0x39,0xF5,0x9B,0x87,0xBD},
-	{0x53,0xC5,0x5F,0x9C,0xB4,0x9F,0xC0,0x19},
-	{0x7A,0x8E,0x7B,0xFA,0x93,0x7E,0x89,0xA3},
-	{0xCF,0x9C,0x5D,0x7A,0x49,0x86,0xAD,0xB5},
-	{0xD1,0xAB,0xB2,0x90,0x65,0x8B,0xC7,0x78},
-	{0x55,0xCB,0x37,0x74,0xD1,0x3E,0xF2,0x01},
-	{0xFA,0x34,0xEC,0x48,0x47,0xB2,0x68,0xB2},
-	{0xA7,0x90,0x79,0x51,0x08,0xEA,0x3C,0xAE},
-	{0xC3,0x9E,0x07,0x2D,0x9F,0xAC,0x63,0x1D},
-	{0x01,0x49,0x33,0xE0,0xCD,0xAF,0xF6,0xE4},
-	{0xF2,0x1E,0x9A,0x77,0xB7,0x1C,0x49,0xBC},
-	{0x24,0x59,0x46,0x88,0x57,0x54,0x36,0x9A},
-	{0x6B,0x5C,0x5A,0x9C,0x5D,0x9E,0x0A,0x5A},
-	};
-
-static unsigned char cbc_key [16]={
-	0x01,0x23,0x45,0x67,0x89,0xab,0xcd,0xef,
-	0xf0,0xe1,0xd2,0xc3,0xb4,0xa5,0x96,0x87};
-static unsigned char cbc_iv [8]={0xfe,0xdc,0xba,0x98,0x76,0x54,0x32,0x10};
-static char cbc_data[40]="7654321 Now is the time for ";
-static unsigned char cbc_ok[32]={
-	0x6B,0x77,0xB4,0xD6,0x30,0x06,0xDE,0xE6,
-	0x05,0xB1,0x56,0xE2,0x74,0x03,0x97,0x93,
-	0x58,0xDE,0xB9,0xE7,0x15,0x46,0x16,0xD9,
-	0x59,0xF1,0x65,0x2B,0xD5,0xFF,0x92,0xCC};
-
-static unsigned char cfb64_ok[]={
-	0xE7,0x32,0x14,0xA2,0x82,0x21,0x39,0xCA,
-	0xF2,0x6E,0xCF,0x6D,0x2E,0xB9,0xE7,0x6E,
-	0x3D,0xA3,0xDE,0x04,0xD1,0x51,0x72,0x00,
-	0x51,0x9D,0x57,0xA6,0xC3};
-
-static unsigned char ofb64_ok[]={
-	0xE7,0x32,0x14,0xA2,0x82,0x21,0x39,0xCA,
-	0x62,0xB3,0x43,0xCC,0x5B,0x65,0x58,0x73,
-	0x10,0xDD,0x90,0x8D,0x0C,0x24,0x1B,0x22,
-	0x63,0xC2,0xCF,0x80,0xDA};
-
-#define KEY_TEST_NUM	25
-static unsigned char key_test[KEY_TEST_NUM]={
-	0xf0,0xe1,0xd2,0xc3,0xb4,0xa5,0x96,0x87,
-	0x78,0x69,0x5a,0x4b,0x3c,0x2d,0x1e,0x0f,
-	0x00,0x11,0x22,0x33,0x44,0x55,0x66,0x77,
-	0x88};
-
-static unsigned char key_data[8]=
-	{0xFE,0xDC,0xBA,0x98,0x76,0x54,0x32,0x10};
-
-static unsigned char key_out[KEY_TEST_NUM][8]={
-	{0xF9,0xAD,0x59,0x7C,0x49,0xDB,0x00,0x5E},
-	{0xE9,0x1D,0x21,0xC1,0xD9,0x61,0xA6,0xD6},
-	{0xE9,0xC2,0xB7,0x0A,0x1B,0xC6,0x5C,0xF3},
-	{0xBE,0x1E,0x63,0x94,0x08,0x64,0x0F,0x05},
-	{0xB3,0x9E,0x44,0x48,0x1B,0xDB,0x1E,0x6E},
-	{0x94,0x57,0xAA,0x83,0xB1,0x92,0x8C,0x0D},
-	{0x8B,0xB7,0x70,0x32,0xF9,0x60,0x62,0x9D},
-	{0xE8,0x7A,0x24,0x4E,0x2C,0xC8,0x5E,0x82},
-	{0x15,0x75,0x0E,0x7A,0x4F,0x4E,0xC5,0x77},
-	{0x12,0x2B,0xA7,0x0B,0x3A,0xB6,0x4A,0xE0},
-	{0x3A,0x83,0x3C,0x9A,0xFF,0xC5,0x37,0xF6},
-	{0x94,0x09,0xDA,0x87,0xA9,0x0F,0x6B,0xF2},
-	{0x88,0x4F,0x80,0x62,0x50,0x60,0xB8,0xB4},
-	{0x1F,0x85,0x03,0x1C,0x19,0xE1,0x19,0x68},
-	{0x79,0xD9,0x37,0x3A,0x71,0x4C,0xA3,0x4F},
-	{0x93,0x14,0x28,0x87,0xEE,0x3B,0xE1,0x5C},
-	{0x03,0x42,0x9E,0x83,0x8C,0xE2,0xD1,0x4B},
-	{0xA4,0x29,0x9E,0x27,0x46,0x9F,0xF6,0x7B},
-	{0xAF,0xD5,0xAE,0xD1,0xC1,0xBC,0x96,0xA8},
-	{0x10,0x85,0x1C,0x0E,0x38,0x58,0xDA,0x9F},
-	{0xE6,0xF5,0x1E,0xD7,0x9B,0x9D,0xB2,0x1F},
-	{0x64,0xA6,0xE1,0x4A,0xFD,0x36,0xB4,0x6F},
-	{0x80,0xC7,0xD7,0xD4,0x5A,0x54,0x79,0xAD},
-	{0x05,0x04,0x4B,0x62,0xFA,0x52,0xD0,0x80},
-	};
-
-static int test(void );
-static int print_test_data(void );
-int main(int argc, char *argv[])
-	{
-	int ret;
-
-	if (argc > 1)
-		ret=print_test_data();
-	else
-		ret=test();
-
-#ifdef OPENSSL_SYS_NETWARE
-    if (ret) printf("ERROR: %d\n", ret);
-#endif
-	EXIT(ret);
-	return(0);
-	}
-
-static int print_test_data(void)
-	{
-	unsigned int i,j;
-
-	printf("ecb test data\n");
-	printf("key bytes\t\tclear bytes\t\tcipher bytes\n");
-	for (i=0; i<NUM_TESTS; i++)
-		{
-		for (j=0; j<8; j++)
-			printf("%02X",ecb_data[i][j]);
-		printf("\t");
-		for (j=0; j<8; j++)
-			printf("%02X",plain_data[i][j]);
-		printf("\t");
-		for (j=0; j<8; j++)
-			printf("%02X",cipher_data[i][j]);
-		printf("\n");
-		}
-
-	printf("set_key test data\n");
-	printf("data[8]= ");
-	for (j=0; j<8; j++)
-		printf("%02X",key_data[j]);
-	printf("\n");
-	for (i=0; i<KEY_TEST_NUM-1; i++)
-		{
-		printf("c=");
-		for (j=0; j<8; j++)
-			printf("%02X",key_out[i][j]);
-		printf(" k[%2u]=",i+1);
-		for (j=0; j<i+1; j++)
-			printf("%02X",key_test[j]);
-		printf("\n");
-		}
-
-	printf("\nchaining mode test data\n");
-	printf("key[16]   = ");
-	for (j=0; j<16; j++)
-		printf("%02X",cbc_key[j]);
-	printf("\niv[8]     = ");
-	for (j=0; j<8; j++)
-		printf("%02X",cbc_iv[j]);
-	printf("\ndata[%d]  = '%s'",(int)strlen(cbc_data)+1,cbc_data);
-	printf("\ndata[%d]  = ",(int)strlen(cbc_data)+1);
-	for (j=0; j<strlen(cbc_data)+1; j++)
-		printf("%02X",cbc_data[j]);
-	printf("\n");
-	printf("cbc cipher text\n");
-	printf("cipher[%d]= ",32);
-	for (j=0; j<32; j++)
-		printf("%02X",cbc_ok[j]);
-	printf("\n");
-
-	printf("cfb64 cipher text\n");
-	printf("cipher[%d]= ",(int)strlen(cbc_data)+1);
-	for (j=0; j<strlen(cbc_data)+1; j++)
-		printf("%02X",cfb64_ok[j]);
-	printf("\n");
-
-	printf("ofb64 cipher text\n");
-	printf("cipher[%d]= ",(int)strlen(cbc_data)+1);
-	for (j=0; j<strlen(cbc_data)+1; j++)
-		printf("%02X",ofb64_ok[j]);
-	printf("\n");
-	return(0);
-	}
-
-static int test(void)
-	{
-	unsigned char cbc_in[40],cbc_out[40],iv[8];
-	int i,n,err=0;
-	BF_KEY key;
-	BF_LONG data[2]; 
-	unsigned char out[8]; 
-	BF_LONG len;
-
-#ifdef CHARSET_EBCDIC
-	ebcdic2ascii(cbc_data, cbc_data, strlen(cbc_data));
-#endif
-
-	printf("testing blowfish in raw ecb mode\n");
-	for (n=0; n<2; n++)
-		{
-#ifdef CHARSET_EBCDIC
-		ebcdic2ascii(bf_key[n], bf_key[n], strlen(bf_key[n]));
-#endif
-		BF_set_key(&key,strlen(bf_key[n]),(unsigned char *)bf_key[n]);
-
-		data[0]=bf_plain[n][0];
-		data[1]=bf_plain[n][1];
-		BF_encrypt(data,&key);
-		if (memcmp(&(bf_cipher[n][0]),&(data[0]),8) != 0)
-			{
-			printf("BF_encrypt error encrypting\n");
-			printf("got     :");
-			for (i=0; i<2; i++)
-				printf("%08lX ",(unsigned long)data[i]);
-			printf("\n");
-			printf("expected:");
-			for (i=0; i<2; i++)
-				printf("%08lX ",(unsigned long)bf_cipher[n][i]);
-			err=1;
-			printf("\n");
-			}
-
-		BF_decrypt(&(data[0]),&key);
-		if (memcmp(&(bf_plain[n][0]),&(data[0]),8) != 0)
-			{
-			printf("BF_encrypt error decrypting\n");
-			printf("got     :");
-			for (i=0; i<2; i++)
-				printf("%08lX ",(unsigned long)data[i]);
-			printf("\n");
-			printf("expected:");
-			for (i=0; i<2; i++)
-				printf("%08lX ",(unsigned long)bf_plain[n][i]);
-			printf("\n");
-			err=1;
-			}
-		}
-
-	printf("testing blowfish in ecb mode\n");
-
-	for (n=0; n<NUM_TESTS; n++)
-		{
-		BF_set_key(&key,8,ecb_data[n]);
-
-		BF_ecb_encrypt(&(plain_data[n][0]),out,&key,BF_ENCRYPT);
-		if (memcmp(&(cipher_data[n][0]),out,8) != 0)
-			{
-			printf("BF_ecb_encrypt blowfish error encrypting\n");
-			printf("got     :");
-			for (i=0; i<8; i++)
-				printf("%02X ",out[i]);
-			printf("\n");
-			printf("expected:");
-			for (i=0; i<8; i++)
-				printf("%02X ",cipher_data[n][i]);
-			err=1;
-			printf("\n");
-			}
-
-		BF_ecb_encrypt(out,out,&key,BF_DECRYPT);
-		if (memcmp(&(plain_data[n][0]),out,8) != 0)
-			{
-			printf("BF_ecb_encrypt error decrypting\n");
-			printf("got     :");
-			for (i=0; i<8; i++)
-				printf("%02X ",out[i]);
-			printf("\n");
-			printf("expected:");
-			for (i=0; i<8; i++)
-				printf("%02X ",plain_data[n][i]);
-			printf("\n");
-			err=1;
-			}
-		}
-
-	printf("testing blowfish set_key\n");
-	for (n=1; n<KEY_TEST_NUM; n++)
-		{
-		BF_set_key(&key,n,key_test);
-		BF_ecb_encrypt(key_data,out,&key,BF_ENCRYPT);
-		/* mips-sgi-irix6.5-gcc  vv  -mabi=64 bug workaround */
-		if (memcmp(out,&(key_out[i=n-1][0]),8) != 0)
-			{
-			printf("blowfish setkey error\n");
-			err=1;
-			}
-		}
-
-	printf("testing blowfish in cbc mode\n");
-	len=strlen(cbc_data)+1;
-
-	BF_set_key(&key,16,cbc_key);
-	memset(cbc_in,0,sizeof cbc_in);
-	memset(cbc_out,0,sizeof cbc_out);
-	memcpy(iv,cbc_iv,sizeof iv);
-	BF_cbc_encrypt((unsigned char *)cbc_data,cbc_out,len,
-		&key,iv,BF_ENCRYPT);
-	if (memcmp(cbc_out,cbc_ok,32) != 0)
-		{
-		err=1;
-		printf("BF_cbc_encrypt encrypt error\n");
-		for (i=0; i<32; i++) printf("0x%02X,",cbc_out[i]);
-		}
-	memcpy(iv,cbc_iv,8);
-	BF_cbc_encrypt(cbc_out,cbc_in,len,
-		&key,iv,BF_DECRYPT);
-	if (memcmp(cbc_in,cbc_data,strlen(cbc_data)+1) != 0)
-		{
-		printf("BF_cbc_encrypt decrypt error\n");
-		err=1;
-		}
-
-	printf("testing blowfish in cfb64 mode\n");
-
-	BF_set_key(&key,16,cbc_key);
-	memset(cbc_in,0,40);
-	memset(cbc_out,0,40);
-	memcpy(iv,cbc_iv,8);
-	n=0;
-	BF_cfb64_encrypt((unsigned char *)cbc_data,cbc_out,(long)13,
-		&key,iv,&n,BF_ENCRYPT);
-	BF_cfb64_encrypt((unsigned char *)&(cbc_data[13]),&(cbc_out[13]),len-13,
-		&key,iv,&n,BF_ENCRYPT);
-	if (memcmp(cbc_out,cfb64_ok,(int)len) != 0)
-		{
-		err=1;
-		printf("BF_cfb64_encrypt encrypt error\n");
-		for (i=0; i<(int)len; i++) printf("0x%02X,",cbc_out[i]);
-		}
-	n=0;
-	memcpy(iv,cbc_iv,8);
-	BF_cfb64_encrypt(cbc_out,cbc_in,17,
-		&key,iv,&n,BF_DECRYPT);
-	BF_cfb64_encrypt(&(cbc_out[17]),&(cbc_in[17]),len-17,
-		&key,iv,&n,BF_DECRYPT);
-	if (memcmp(cbc_in,cbc_data,(int)len) != 0)
-		{
-		printf("BF_cfb64_encrypt decrypt error\n");
-		err=1;
-		}
-
-	printf("testing blowfish in ofb64\n");
-
-	BF_set_key(&key,16,cbc_key);
-	memset(cbc_in,0,40);
-	memset(cbc_out,0,40);
-	memcpy(iv,cbc_iv,8);
-	n=0;
-	BF_ofb64_encrypt((unsigned char *)cbc_data,cbc_out,(long)13,&key,iv,&n);
-	BF_ofb64_encrypt((unsigned char *)&(cbc_data[13]),
-		&(cbc_out[13]),len-13,&key,iv,&n);
-	if (memcmp(cbc_out,ofb64_ok,(int)len) != 0)
-		{
-		err=1;
-		printf("BF_ofb64_encrypt encrypt error\n");
-		for (i=0; i<(int)len; i++) printf("0x%02X,",cbc_out[i]);
-		}
-	n=0;
-	memcpy(iv,cbc_iv,8);
-	BF_ofb64_encrypt(cbc_out,cbc_in,17,&key,iv,&n);
-	BF_ofb64_encrypt(&(cbc_out[17]),&(cbc_in[17]),len-17,&key,iv,&n);
-	if (memcmp(cbc_in,cbc_data,(int)len) != 0)
-		{
-		printf("BF_ofb64_encrypt decrypt error\n");
-		err=1;
-		}
-
-	return(err);
-	}
-#endif
diff --git a/crypto/openssl/crypto/bf/blowfish.h b/crypto/openssl/crypto/bf/blowfish.h
deleted file mode 100644
index cd49e85ab29a..000000000000
--- a/crypto/openssl/crypto/bf/blowfish.h
+++ /dev/null
@@ -1,127 +0,0 @@
-/* crypto/bf/blowfish.h */
-/* Copyright (C) 1995-1998 Eric Young (eay@cryptsoft.com)
- * All rights reserved.
- *
- * This package is an SSL implementation written
- * by Eric Young (eay@cryptsoft.com).
- * The implementation was written so as to conform with Netscapes SSL.
- * 
- * This library is free for commercial and non-commercial use as long as
- * the following conditions are aheared to.  The following conditions
- * apply to all code found in this distribution, be it the RC4, RSA,
- * lhash, DES, etc., code; not just the SSL code.  The SSL documentation
- * included with this distribution is covered by the same copyright terms
- * except that the holder is Tim Hudson (tjh@cryptsoft.com).
- * 
- * Copyright remains Eric Young's, and as such any Copyright notices in
- * the code are not to be removed.
- * If this package is used in a product, Eric Young should be given attribution
- * as the author of the parts of the library used.
- * This can be in the form of a textual message at program startup or
- * in documentation (online or textual) provided with the package.
- * 
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions
- * are met:
- * 1. Redistributions of source code must retain the copyright
- *    notice, this list of conditions and the following disclaimer.
- * 2. Redistributions in binary form must reproduce the above copyright
- *    notice, this list of conditions and the following disclaimer in the
- *    documentation and/or other materials provided with the distribution.
- * 3. All advertising materials mentioning features or use of this software
- *    must display the following acknowledgement:
- *    "This product includes cryptographic software written by
- *     Eric Young (eay@cryptsoft.com)"
- *    The word 'cryptographic' can be left out if the rouines from the library
- *    being used are not cryptographic related :-).
- * 4. If you include any Windows specific code (or a derivative thereof) from 
- *    the apps directory (application code) you must include an acknowledgement:
- *    "This product includes software written by Tim Hudson (tjh@cryptsoft.com)"
- * 
- * THIS SOFTWARE IS PROVIDED BY ERIC YOUNG ``AS IS'' AND
- * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
- * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
- * ARE DISCLAIMED.  IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE
- * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
- * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
- * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
- * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
- * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
- * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
- * SUCH DAMAGE.
- * 
- * The licence and distribution terms for any publically available version or
- * derivative of this code cannot be changed.  i.e. this code cannot simply be
- * copied and put under another distribution licence
- * [including the GNU Public Licence.]
- */
-
-#ifndef HEADER_BLOWFISH_H
-#define HEADER_BLOWFISH_H
-
-#include <openssl/e_os2.h>
-
-#ifdef  __cplusplus
-extern "C" {
-#endif
-
-#ifdef OPENSSL_NO_BF
-#error BF is disabled.
-#endif
-
-#define BF_ENCRYPT	1
-#define BF_DECRYPT	0
-
-/*
- * !!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
- * ! BF_LONG has to be at least 32 bits wide. If it's wider, then !
- * ! BF_LONG_LOG2 has to be defined along.                        !
- * !!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
- */
-
-#if defined(OPENSSL_SYS_WIN16) || defined(__LP32__)
-#define BF_LONG unsigned long
-#elif defined(OPENSSL_SYS_CRAY) || defined(__ILP64__)
-#define BF_LONG unsigned long
-#define BF_LONG_LOG2 3
-/*
- * _CRAY note. I could declare short, but I have no idea what impact
- * does it have on performance on none-T3E machines. I could declare
- * int, but at least on C90 sizeof(int) can be chosen at compile time.
- * So I've chosen long...
- *					<appro@fy.chalmers.se>
- */
-#else
-#define BF_LONG unsigned int
-#endif
-
-#define BF_ROUNDS	16
-#define BF_BLOCK	8
-
-typedef struct bf_key_st
-	{
-	BF_LONG P[BF_ROUNDS+2];
-	BF_LONG S[4*256];
-	} BF_KEY;
-
- 
-void BF_set_key(BF_KEY *key, int len, const unsigned char *data);
-
-void BF_encrypt(BF_LONG *data,const BF_KEY *key);
-void BF_decrypt(BF_LONG *data,const BF_KEY *key);
-
-void BF_ecb_encrypt(const unsigned char *in, unsigned char *out,
-	const BF_KEY *key, int enc);
-void BF_cbc_encrypt(const unsigned char *in, unsigned char *out, long length,
-	const BF_KEY *schedule, unsigned char *ivec, int enc);
-void BF_cfb64_encrypt(const unsigned char *in, unsigned char *out, long length,
-	const BF_KEY *schedule, unsigned char *ivec, int *num, int enc);
-void BF_ofb64_encrypt(const unsigned char *in, unsigned char *out, long length,
-	const BF_KEY *schedule, unsigned char *ivec, int *num);
-const char *BF_options(void);
-
-#ifdef  __cplusplus
-}
-#endif
-
-#endif
diff --git a/crypto/openssl/crypto/bio/Makefile b/crypto/openssl/crypto/bio/Makefile
deleted file mode 100644
index 1ef6c2fb9fdb..000000000000
--- a/crypto/openssl/crypto/bio/Makefile
+++ /dev/null
@@ -1,221 +0,0 @@
-#
-# OpenSSL/crypto/bio/Makefile
-#
-
-DIR=	bio
-TOP=	../..
-CC=	cc
-INCLUDES= -I.. -I$(TOP) -I../../include
-CFLAG=-g
-MAKEFILE=	Makefile
-AR=		ar r
-
-CFLAGS= $(INCLUDES) $(CFLAG)
-
-GENERAL=Makefile
-TEST=
-APPS=
-
-LIB=$(TOP)/libcrypto.a
-LIBSRC= bio_lib.c bio_cb.c bio_err.c \
-	bss_mem.c bss_null.c bss_fd.c \
-	bss_file.c bss_sock.c bss_conn.c \
-	bf_null.c bf_buff.c b_print.c b_dump.c \
-	b_sock.c bss_acpt.c bf_nbio.c bss_log.c bss_bio.c \
-	bss_dgram.c
-#	bf_lbuf.c
-LIBOBJ= bio_lib.o bio_cb.o bio_err.o \
-	bss_mem.o bss_null.o bss_fd.o \
-	bss_file.o bss_sock.o bss_conn.o \
-	bf_null.o bf_buff.o b_print.o b_dump.o \
-	b_sock.o bss_acpt.o bf_nbio.o bss_log.o bss_bio.o \
-	bss_dgram.o
-#	bf_lbuf.o
-
-SRC= $(LIBSRC)
-
-EXHEADER= bio.h
-HEADER=	bio_lcl.h $(EXHEADER)
-
-ALL=    $(GENERAL) $(SRC) $(HEADER)
-
-top:
-	(cd ../..; $(MAKE) DIRS=crypto SDIRS=$(DIR) sub_all)
-
-all:	lib
-
-lib:	$(LIBOBJ)
-	$(AR) $(LIB) $(LIBOBJ)
-	$(RANLIB) $(LIB) || echo Never mind.
-	@touch lib
-
-files:
-	$(PERL) $(TOP)/util/files.pl Makefile >> $(TOP)/MINFO
-
-links:
-	@$(PERL) $(TOP)/util/mklink.pl ../../include/openssl $(EXHEADER)
-	@$(PERL) $(TOP)/util/mklink.pl ../../test $(TEST)
-	@$(PERL) $(TOP)/util/mklink.pl ../../apps $(APPS)
-
-install:
-	@[ -n "$(INSTALLTOP)" ] # should be set by top Makefile...
-	@headerlist="$(EXHEADER)"; for i in $$headerlist; \
-	do  \
-	(cp $$i $(INSTALL_PREFIX)$(INSTALLTOP)/include/openssl/$$i; \
-	chmod 644 $(INSTALL_PREFIX)$(INSTALLTOP)/include/openssl/$$i ); \
-	done;
-
-tags:
-	ctags $(SRC)
-
-tests:
-
-lint:
-	lint -DLINT $(INCLUDES) $(SRC)>fluff
-
-depend:
-	@[ -n "$(MAKEDEPEND)" ] # should be set by upper Makefile...
-	$(MAKEDEPEND) -- $(CFLAG) $(INCLUDES) $(DEPFLAG) -- $(PROGS) $(LIBSRC)
-
-dclean:
-	$(PERL) -pe 'if (/^# DO NOT DELETE THIS LINE/) {print; exit(0);}' $(MAKEFILE) >Makefile.new
-	mv -f Makefile.new $(MAKEFILE)
-
-clean:
-	rm -f *.o *.obj lib tags core .pure .nfs* *.old *.bak fluff
-
-# DO NOT DELETE THIS LINE -- make depend depends on it.
-
-b_dump.o: ../../e_os.h ../../include/openssl/bio.h
-b_dump.o: ../../include/openssl/buffer.h ../../include/openssl/crypto.h
-b_dump.o: ../../include/openssl/e_os2.h ../../include/openssl/err.h
-b_dump.o: ../../include/openssl/lhash.h ../../include/openssl/opensslconf.h
-b_dump.o: ../../include/openssl/opensslv.h ../../include/openssl/ossl_typ.h
-b_dump.o: ../../include/openssl/safestack.h ../../include/openssl/stack.h
-b_dump.o: ../../include/openssl/symhacks.h ../cryptlib.h b_dump.c bio_lcl.h
-b_print.o: ../../e_os.h ../../include/openssl/bio.h ../../include/openssl/bn.h
-b_print.o: ../../include/openssl/buffer.h ../../include/openssl/crypto.h
-b_print.o: ../../include/openssl/e_os2.h ../../include/openssl/err.h
-b_print.o: ../../include/openssl/lhash.h ../../include/openssl/opensslconf.h
-b_print.o: ../../include/openssl/opensslv.h ../../include/openssl/ossl_typ.h
-b_print.o: ../../include/openssl/safestack.h ../../include/openssl/stack.h
-b_print.o: ../../include/openssl/symhacks.h ../cryptlib.h b_print.c
-b_sock.o: ../../e_os.h ../../include/openssl/bio.h
-b_sock.o: ../../include/openssl/buffer.h ../../include/openssl/crypto.h
-b_sock.o: ../../include/openssl/e_os2.h ../../include/openssl/err.h
-b_sock.o: ../../include/openssl/lhash.h ../../include/openssl/opensslconf.h
-b_sock.o: ../../include/openssl/opensslv.h ../../include/openssl/ossl_typ.h
-b_sock.o: ../../include/openssl/safestack.h ../../include/openssl/stack.h
-b_sock.o: ../../include/openssl/symhacks.h ../cryptlib.h b_sock.c
-bf_buff.o: ../../e_os.h ../../include/openssl/bio.h
-bf_buff.o: ../../include/openssl/buffer.h ../../include/openssl/crypto.h
-bf_buff.o: ../../include/openssl/e_os2.h ../../include/openssl/err.h
-bf_buff.o: ../../include/openssl/lhash.h ../../include/openssl/opensslconf.h
-bf_buff.o: ../../include/openssl/opensslv.h ../../include/openssl/ossl_typ.h
-bf_buff.o: ../../include/openssl/safestack.h ../../include/openssl/stack.h
-bf_buff.o: ../../include/openssl/symhacks.h ../cryptlib.h bf_buff.c
-bf_nbio.o: ../../e_os.h ../../include/openssl/bio.h
-bf_nbio.o: ../../include/openssl/buffer.h ../../include/openssl/crypto.h
-bf_nbio.o: ../../include/openssl/e_os2.h ../../include/openssl/err.h
-bf_nbio.o: ../../include/openssl/lhash.h ../../include/openssl/opensslconf.h
-bf_nbio.o: ../../include/openssl/opensslv.h ../../include/openssl/ossl_typ.h
-bf_nbio.o: ../../include/openssl/rand.h ../../include/openssl/safestack.h
-bf_nbio.o: ../../include/openssl/stack.h ../../include/openssl/symhacks.h
-bf_nbio.o: ../cryptlib.h bf_nbio.c
-bf_null.o: ../../e_os.h ../../include/openssl/bio.h
-bf_null.o: ../../include/openssl/buffer.h ../../include/openssl/crypto.h
-bf_null.o: ../../include/openssl/e_os2.h ../../include/openssl/err.h
-bf_null.o: ../../include/openssl/lhash.h ../../include/openssl/opensslconf.h
-bf_null.o: ../../include/openssl/opensslv.h ../../include/openssl/ossl_typ.h
-bf_null.o: ../../include/openssl/safestack.h ../../include/openssl/stack.h
-bf_null.o: ../../include/openssl/symhacks.h ../cryptlib.h bf_null.c
-bio_cb.o: ../../e_os.h ../../include/openssl/bio.h
-bio_cb.o: ../../include/openssl/buffer.h ../../include/openssl/crypto.h
-bio_cb.o: ../../include/openssl/e_os2.h ../../include/openssl/err.h
-bio_cb.o: ../../include/openssl/lhash.h ../../include/openssl/opensslconf.h
-bio_cb.o: ../../include/openssl/opensslv.h ../../include/openssl/ossl_typ.h
-bio_cb.o: ../../include/openssl/safestack.h ../../include/openssl/stack.h
-bio_cb.o: ../../include/openssl/symhacks.h ../cryptlib.h bio_cb.c
-bio_err.o: ../../include/openssl/bio.h ../../include/openssl/crypto.h
-bio_err.o: ../../include/openssl/e_os2.h ../../include/openssl/err.h
-bio_err.o: ../../include/openssl/lhash.h ../../include/openssl/opensslconf.h
-bio_err.o: ../../include/openssl/opensslv.h ../../include/openssl/ossl_typ.h
-bio_err.o: ../../include/openssl/safestack.h ../../include/openssl/stack.h
-bio_err.o: ../../include/openssl/symhacks.h bio_err.c
-bio_lib.o: ../../e_os.h ../../include/openssl/bio.h
-bio_lib.o: ../../include/openssl/buffer.h ../../include/openssl/crypto.h
-bio_lib.o: ../../include/openssl/e_os2.h ../../include/openssl/err.h
-bio_lib.o: ../../include/openssl/lhash.h ../../include/openssl/opensslconf.h
-bio_lib.o: ../../include/openssl/opensslv.h ../../include/openssl/ossl_typ.h
-bio_lib.o: ../../include/openssl/safestack.h ../../include/openssl/stack.h
-bio_lib.o: ../../include/openssl/symhacks.h ../cryptlib.h bio_lib.c
-bss_acpt.o: ../../e_os.h ../../include/openssl/bio.h
-bss_acpt.o: ../../include/openssl/buffer.h ../../include/openssl/crypto.h
-bss_acpt.o: ../../include/openssl/e_os2.h ../../include/openssl/err.h
-bss_acpt.o: ../../include/openssl/lhash.h ../../include/openssl/opensslconf.h
-bss_acpt.o: ../../include/openssl/opensslv.h ../../include/openssl/ossl_typ.h
-bss_acpt.o: ../../include/openssl/safestack.h ../../include/openssl/stack.h
-bss_acpt.o: ../../include/openssl/symhacks.h ../cryptlib.h bss_acpt.c
-bss_bio.o: ../../e_os.h ../../include/openssl/bio.h
-bss_bio.o: ../../include/openssl/crypto.h ../../include/openssl/e_os2.h
-bss_bio.o: ../../include/openssl/err.h ../../include/openssl/lhash.h
-bss_bio.o: ../../include/openssl/opensslconf.h ../../include/openssl/opensslv.h
-bss_bio.o: ../../include/openssl/ossl_typ.h ../../include/openssl/safestack.h
-bss_bio.o: ../../include/openssl/stack.h ../../include/openssl/symhacks.h
-bss_bio.o: bss_bio.c
-bss_conn.o: ../../e_os.h ../../include/openssl/bio.h
-bss_conn.o: ../../include/openssl/buffer.h ../../include/openssl/crypto.h
-bss_conn.o: ../../include/openssl/e_os2.h ../../include/openssl/err.h
-bss_conn.o: ../../include/openssl/lhash.h ../../include/openssl/opensslconf.h
-bss_conn.o: ../../include/openssl/opensslv.h ../../include/openssl/ossl_typ.h
-bss_conn.o: ../../include/openssl/safestack.h ../../include/openssl/stack.h
-bss_conn.o: ../../include/openssl/symhacks.h ../cryptlib.h bss_conn.c
-bss_dgram.o: ../../e_os.h ../../include/openssl/bio.h
-bss_dgram.o: ../../include/openssl/buffer.h ../../include/openssl/crypto.h
-bss_dgram.o: ../../include/openssl/e_os2.h ../../include/openssl/err.h
-bss_dgram.o: ../../include/openssl/lhash.h ../../include/openssl/opensslconf.h
-bss_dgram.o: ../../include/openssl/opensslv.h ../../include/openssl/ossl_typ.h
-bss_dgram.o: ../../include/openssl/safestack.h ../../include/openssl/stack.h
-bss_dgram.o: ../../include/openssl/symhacks.h ../cryptlib.h bss_dgram.c
-bss_fd.o: ../../e_os.h ../../include/openssl/bio.h
-bss_fd.o: ../../include/openssl/buffer.h ../../include/openssl/crypto.h
-bss_fd.o: ../../include/openssl/e_os2.h ../../include/openssl/err.h
-bss_fd.o: ../../include/openssl/lhash.h ../../include/openssl/opensslconf.h
-bss_fd.o: ../../include/openssl/opensslv.h ../../include/openssl/ossl_typ.h
-bss_fd.o: ../../include/openssl/safestack.h ../../include/openssl/stack.h
-bss_fd.o: ../../include/openssl/symhacks.h ../cryptlib.h bio_lcl.h bss_fd.c
-bss_file.o: ../../e_os.h ../../include/openssl/bio.h
-bss_file.o: ../../include/openssl/buffer.h ../../include/openssl/crypto.h
-bss_file.o: ../../include/openssl/e_os2.h ../../include/openssl/err.h
-bss_file.o: ../../include/openssl/lhash.h ../../include/openssl/opensslconf.h
-bss_file.o: ../../include/openssl/opensslv.h ../../include/openssl/ossl_typ.h
-bss_file.o: ../../include/openssl/safestack.h ../../include/openssl/stack.h
-bss_file.o: ../../include/openssl/symhacks.h ../cryptlib.h bio_lcl.h bss_file.c
-bss_log.o: ../../e_os.h ../../include/openssl/bio.h
-bss_log.o: ../../include/openssl/buffer.h ../../include/openssl/crypto.h
-bss_log.o: ../../include/openssl/e_os2.h ../../include/openssl/err.h
-bss_log.o: ../../include/openssl/lhash.h ../../include/openssl/opensslconf.h
-bss_log.o: ../../include/openssl/opensslv.h ../../include/openssl/ossl_typ.h
-bss_log.o: ../../include/openssl/safestack.h ../../include/openssl/stack.h
-bss_log.o: ../../include/openssl/symhacks.h ../cryptlib.h bss_log.c
-bss_mem.o: ../../e_os.h ../../include/openssl/bio.h
-bss_mem.o: ../../include/openssl/buffer.h ../../include/openssl/crypto.h
-bss_mem.o: ../../include/openssl/e_os2.h ../../include/openssl/err.h
-bss_mem.o: ../../include/openssl/lhash.h ../../include/openssl/opensslconf.h
-bss_mem.o: ../../include/openssl/opensslv.h ../../include/openssl/ossl_typ.h
-bss_mem.o: ../../include/openssl/safestack.h ../../include/openssl/stack.h
-bss_mem.o: ../../include/openssl/symhacks.h ../cryptlib.h bss_mem.c
-bss_null.o: ../../e_os.h ../../include/openssl/bio.h
-bss_null.o: ../../include/openssl/buffer.h ../../include/openssl/crypto.h
-bss_null.o: ../../include/openssl/e_os2.h ../../include/openssl/err.h
-bss_null.o: ../../include/openssl/lhash.h ../../include/openssl/opensslconf.h
-bss_null.o: ../../include/openssl/opensslv.h ../../include/openssl/ossl_typ.h
-bss_null.o: ../../include/openssl/safestack.h ../../include/openssl/stack.h
-bss_null.o: ../../include/openssl/symhacks.h ../cryptlib.h bss_null.c
-bss_sock.o: ../../e_os.h ../../include/openssl/bio.h
-bss_sock.o: ../../include/openssl/buffer.h ../../include/openssl/crypto.h
-bss_sock.o: ../../include/openssl/e_os2.h ../../include/openssl/err.h
-bss_sock.o: ../../include/openssl/lhash.h ../../include/openssl/opensslconf.h
-bss_sock.o: ../../include/openssl/opensslv.h ../../include/openssl/ossl_typ.h
-bss_sock.o: ../../include/openssl/safestack.h ../../include/openssl/stack.h
-bss_sock.o: ../../include/openssl/symhacks.h ../cryptlib.h bss_sock.c
diff --git a/crypto/openssl/crypto/bio/b_dump.c b/crypto/openssl/crypto/bio/b_dump.c
deleted file mode 100644
index c80ecc429532..000000000000
--- a/crypto/openssl/crypto/bio/b_dump.c
+++ /dev/null
@@ -1,187 +0,0 @@
-/* crypto/bio/b_dump.c */
-/* Copyright (C) 1995-1998 Eric Young (eay@cryptsoft.com)
- * All rights reserved.
- *
- * This package is an SSL implementation written
- * by Eric Young (eay@cryptsoft.com).
- * The implementation was written so as to conform with Netscapes SSL.
- * 
- * This library is free for commercial and non-commercial use as long as
- * the following conditions are aheared to.  The following conditions
- * apply to all code found in this distribution, be it the RC4, RSA,
- * lhash, DES, etc., code; not just the SSL code.  The SSL documentation
- * included with this distribution is covered by the same copyright terms
- * except that the holder is Tim Hudson (tjh@cryptsoft.com).
- * 
- * Copyright remains Eric Young's, and as such any Copyright notices in
- * the code are not to be removed.
- * If this package is used in a product, Eric Young should be given attribution
- * as the author of the parts of the library used.
- * This can be in the form of a textual message at program startup or
- * in documentation (online or textual) provided with the package.
- * 
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions
- * are met:
- * 1. Redistributions of source code must retain the copyright
- *    notice, this list of conditions and the following disclaimer.
- * 2. Redistributions in binary form must reproduce the above copyright
- *    notice, this list of conditions and the following disclaimer in the
- *    documentation and/or other materials provided with the distribution.
- * 3. All advertising materials mentioning features or use of this software
- *    must display the following acknowledgement:
- *    "This product includes cryptographic software written by
- *     Eric Young (eay@cryptsoft.com)"
- *    The word 'cryptographic' can be left out if the rouines from the library
- *    being used are not cryptographic related :-).
- * 4. If you include any Windows specific code (or a derivative thereof) from 
- *    the apps directory (application code) you must include an acknowledgement:
- *    "This product includes software written by Tim Hudson (tjh@cryptsoft.com)"
- * 
- * THIS SOFTWARE IS PROVIDED BY ERIC YOUNG ``AS IS'' AND
- * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
- * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
- * ARE DISCLAIMED.  IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE
- * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
- * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
- * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
- * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
- * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
- * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
- * SUCH DAMAGE.
- * 
- * The licence and distribution terms for any publically available version or
- * derivative of this code cannot be changed.  i.e. this code cannot simply be
- * copied and put under another distribution licence
- * [including the GNU Public Licence.]
- */
-
-/* 
- * Stolen from tjh's ssl/ssl_trc.c stuff.
- */
-
-#include <stdio.h>
-#include "cryptlib.h"
-#include "bio_lcl.h"
-
-#define TRUNCATE
-#define DUMP_WIDTH	16
-#define DUMP_WIDTH_LESS_INDENT(i) (DUMP_WIDTH-((i-(i>6?6:i)+3)/4))
-
-int BIO_dump_cb(int (*cb)(const void *data, size_t len, void *u),
-	void *u, const char *s, int len)
-	{
-	return BIO_dump_indent_cb(cb, u, s, len, 0);
-	}
-
-int BIO_dump_indent_cb(int (*cb)(const void *data, size_t len, void *u),
-	void *u, const char *s, int len, int indent)
-	{
-	int ret=0;
-	char buf[288+1],tmp[20],str[128+1];
-	int i,j,rows,trc;
-	unsigned char ch;
-	int dump_width;
-
-	trc=0;
-
-#ifdef TRUNCATE
-	for(; (len > 0) && ((s[len-1] == ' ') || (s[len-1] == '\0')); len--)
-		trc++;
-#endif
-
-	if (indent < 0)
-		indent = 0;
-	if (indent)
-		{
-		if (indent > 128) indent=128;
-		memset(str,' ',indent);
-		}
-	str[indent]='\0';
-
-	dump_width=DUMP_WIDTH_LESS_INDENT(indent);
-	rows=(len/dump_width);
-	if ((rows*dump_width)<len)
-		rows++;
-	for(i=0;i<rows;i++)
-		{
-		buf[0]='\0';	/* start with empty string */
-		BUF_strlcpy(buf,str,sizeof buf);
-		BIO_snprintf(tmp,sizeof tmp,"%04x - ",i*dump_width);
-		BUF_strlcat(buf,tmp,sizeof buf);
-		for(j=0;j<dump_width;j++)
-			{
-			if (((i*dump_width)+j)>=len)
-				{
-				BUF_strlcat(buf,"   ",sizeof buf);
-				}
-			else
-				{
-				ch=((unsigned char)*(s+i*dump_width+j)) & 0xff;
-				BIO_snprintf(tmp,sizeof tmp,"%02x%c",ch,
-					j==7?'-':' ');
-				BUF_strlcat(buf,tmp,sizeof buf);
-				}
-			}
-		BUF_strlcat(buf,"  ",sizeof buf);
-		for(j=0;j<dump_width;j++)
-			{
-			if (((i*dump_width)+j)>=len)
-				break;
-			ch=((unsigned char)*(s+i*dump_width+j)) & 0xff;
-#ifndef CHARSET_EBCDIC
-			BIO_snprintf(tmp,sizeof tmp,"%c",
-				((ch>=' ')&&(ch<='~'))?ch:'.');
-#else
-			BIO_snprintf(tmp,sizeof tmp,"%c",
-				((ch>=os_toascii[' '])&&(ch<=os_toascii['~']))
-				? os_toebcdic[ch]
-				: '.');
-#endif
-			BUF_strlcat(buf,tmp,sizeof buf);
-			}
-		BUF_strlcat(buf,"\n",sizeof buf);
-		/* if this is the last call then update the ddt_dump thing so
-		 * that we will move the selection point in the debug window
-		 */
-		ret+=cb((void *)buf,strlen(buf),u);
-		}
-#ifdef TRUNCATE
-	if (trc > 0)
-		{
-		BIO_snprintf(buf,sizeof buf,"%s%04x - <SPACES/NULS>\n",str,
-			len+trc);
-		ret+=cb((void *)buf,strlen(buf),u);
-		}
-#endif
-	return(ret);
-	}
-
-#ifndef OPENSSL_NO_FP_API
-static int write_fp(const void *data, size_t len, void *fp)
-	{
-	return UP_fwrite(data, len, 1, fp);
-	}
-int BIO_dump_fp(FILE *fp, const char *s, int len)
-	{
-	return BIO_dump_cb(write_fp, fp, s, len);
-	}
-int BIO_dump_indent_fp(FILE *fp, const char *s, int len, int indent)
-	{
-	return BIO_dump_indent_cb(write_fp, fp, s, len, indent);
-	}
-#endif
-
-static int write_bio(const void *data, size_t len, void *bp)
-	{
-	return BIO_write((BIO *)bp, (const char *)data, len);
-	}
-int BIO_dump(BIO *bp, const char *s, int len)
-	{
-	return BIO_dump_cb(write_bio, bp, s, len);
-	}
-int BIO_dump_indent(BIO *bp, const char *s, int len, int indent)
-	{
-	return BIO_dump_indent_cb(write_bio, bp, s, len, indent);
-	}
-
diff --git a/crypto/openssl/crypto/bio/b_print.c b/crypto/openssl/crypto/bio/b_print.c
deleted file mode 100644
index 4857cfe0ce84..000000000000
--- a/crypto/openssl/crypto/bio/b_print.c
+++ /dev/null
@@ -1,842 +0,0 @@
-/* crypto/bio/b_print.c */
-/* Copyright (C) 1995-1998 Eric Young (eay@cryptsoft.com)
- * All rights reserved.
- *
- * This package is an SSL implementation written
- * by Eric Young (eay@cryptsoft.com).
- * The implementation was written so as to conform with Netscapes SSL.
- * 
- * This library is free for commercial and non-commercial use as long as
- * the following conditions are aheared to.  The following conditions
- * apply to all code found in this distribution, be it the RC4, RSA,
- * lhash, DES, etc., code; not just the SSL code.  The SSL documentation
- * included with this distribution is covered by the same copyright terms
- * except that the holder is Tim Hudson (tjh@cryptsoft.com).
- * 
- * Copyright remains Eric Young's, and as such any Copyright notices in
- * the code are not to be removed.
- * If this package is used in a product, Eric Young should be given attribution
- * as the author of the parts of the library used.
- * This can be in the form of a textual message at program startup or
- * in documentation (online or textual) provided with the package.
- * 
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions
- * are met:
- * 1. Redistributions of source code must retain the copyright
- *    notice, this list of conditions and the following disclaimer.
- * 2. Redistributions in binary form must reproduce the above copyright
- *    notice, this list of conditions and the following disclaimer in the
- *    documentation and/or other materials provided with the distribution.
- * 3. All advertising materials mentioning features or use of this software
- *    must display the following acknowledgement:
- *    "This product includes cryptographic software written by
- *     Eric Young (eay@cryptsoft.com)"
- *    The word 'cryptographic' can be left out if the rouines from the library
- *    being used are not cryptographic related :-).
- * 4. If you include any Windows specific code (or a derivative thereof) from 
- *    the apps directory (application code) you must include an acknowledgement:
- *    "This product includes software written by Tim Hudson (tjh@cryptsoft.com)"
- * 
- * THIS SOFTWARE IS PROVIDED BY ERIC YOUNG ``AS IS'' AND
- * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
- * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
- * ARE DISCLAIMED.  IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE
- * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
- * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
- * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
- * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
- * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
- * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
- * SUCH DAMAGE.
- * 
- * The licence and distribution terms for any publically available version or
- * derivative of this code cannot be changed.  i.e. this code cannot simply be
- * copied and put under another distribution licence
- * [including the GNU Public Licence.]
- */
-
-/* disable assert() unless BIO_DEBUG has been defined */
-#ifndef BIO_DEBUG
-# ifndef NDEBUG
-#  define NDEBUG
-# endif
-#endif
-
-/* 
- * Stolen from tjh's ssl/ssl_trc.c stuff.
- */
-
-#include <stdio.h>
-#include <string.h>
-#include <ctype.h>
-#include <assert.h>
-#include <limits.h>
-#include "cryptlib.h"
-#ifndef NO_SYS_TYPES_H
-#include <sys/types.h>
-#endif
-#include <openssl/bn.h>         /* To get BN_LLONG properly defined */
-#include <openssl/bio.h>
-
-#ifdef BN_LLONG
-# ifndef HAVE_LONG_LONG
-#  define HAVE_LONG_LONG 1
-# endif
-#endif
-
-/***************************************************************************/
-
-/*
- * Copyright Patrick Powell 1995
- * This code is based on code written by Patrick Powell <papowell@astart.com>
- * It may be used for any purpose as long as this notice remains intact
- * on all source code distributions.
- */
-
-/*
- * This code contains numerious changes and enhancements which were
- * made by lots of contributors over the last years to Patrick Powell's
- * original code:
- *
- * o Patrick Powell <papowell@astart.com>      (1995)
- * o Brandon Long <blong@fiction.net>          (1996, for Mutt)
- * o Thomas Roessler <roessler@guug.de>        (1998, for Mutt)
- * o Michael Elkins <me@cs.hmc.edu>            (1998, for Mutt)
- * o Andrew Tridgell <tridge@samba.org>        (1998, for Samba)
- * o Luke Mewburn <lukem@netbsd.org>           (1999, for LukemFTP)
- * o Ralf S. Engelschall <rse@engelschall.com> (1999, for Pth)
- * o ...                                       (for OpenSSL)
- */
-
-#ifdef HAVE_LONG_DOUBLE
-#define LDOUBLE long double
-#else
-#define LDOUBLE double
-#endif
-
-#if HAVE_LONG_LONG
-# if defined(OPENSSL_SYS_WIN32) && !defined(__GNUC__)
-# define LLONG _int64
-# else
-# define LLONG long long
-# endif
-#else
-#define LLONG long
-#endif
-
-static void fmtstr     (char **, char **, size_t *, size_t *,
-			const char *, int, int, int);
-static void fmtint     (char **, char **, size_t *, size_t *,
-			LLONG, int, int, int, int);
-static void fmtfp      (char **, char **, size_t *, size_t *,
-			LDOUBLE, int, int, int);
-static void doapr_outch (char **, char **, size_t *, size_t *, int);
-static void _dopr(char **sbuffer, char **buffer,
-		  size_t *maxlen, size_t *retlen, int *truncated,
-		  const char *format, va_list args);
-
-/* format read states */
-#define DP_S_DEFAULT    0
-#define DP_S_FLAGS      1
-#define DP_S_MIN        2
-#define DP_S_DOT        3
-#define DP_S_MAX        4
-#define DP_S_MOD        5
-#define DP_S_CONV       6
-#define DP_S_DONE       7
-
-/* format flags - Bits */
-#define DP_F_MINUS      (1 << 0)
-#define DP_F_PLUS       (1 << 1)
-#define DP_F_SPACE      (1 << 2)
-#define DP_F_NUM        (1 << 3)
-#define DP_F_ZERO       (1 << 4)
-#define DP_F_UP         (1 << 5)
-#define DP_F_UNSIGNED   (1 << 6)
-
-/* conversion flags */
-#define DP_C_SHORT      1
-#define DP_C_LONG       2
-#define DP_C_LDOUBLE    3
-#define DP_C_LLONG      4
-
-/* some handy macros */
-#define char_to_int(p) (p - '0')
-#define OSSL_MAX(p,q) ((p >= q) ? p : q)
-
-static void
-_dopr(
-    char **sbuffer,
-    char **buffer,
-    size_t *maxlen,
-    size_t *retlen,
-    int *truncated,
-    const char *format,
-    va_list args)
-{
-    char ch;
-    LLONG value;
-    LDOUBLE fvalue;
-    char *strvalue;
-    int min;
-    int max;
-    int state;
-    int flags;
-    int cflags;
-    size_t currlen;
-
-    state = DP_S_DEFAULT;
-    flags = currlen = cflags = min = 0;
-    max = -1;
-    ch = *format++;
-
-    while (state != DP_S_DONE) {
-        if (ch == '\0' || (buffer == NULL && currlen >= *maxlen))
-            state = DP_S_DONE;
-
-        switch (state) {
-        case DP_S_DEFAULT:
-            if (ch == '%')
-                state = DP_S_FLAGS;
-            else
-                doapr_outch(sbuffer,buffer, &currlen, maxlen, ch);
-            ch = *format++;
-            break;
-        case DP_S_FLAGS:
-            switch (ch) {
-            case '-':
-                flags |= DP_F_MINUS;
-                ch = *format++;
-                break;
-            case '+':
-                flags |= DP_F_PLUS;
-                ch = *format++;
-                break;
-            case ' ':
-                flags |= DP_F_SPACE;
-                ch = *format++;
-                break;
-            case '#':
-                flags |= DP_F_NUM;
-                ch = *format++;
-                break;
-            case '0':
-                flags |= DP_F_ZERO;
-                ch = *format++;
-                break;
-            default:
-                state = DP_S_MIN;
-                break;
-            }
-            break;
-        case DP_S_MIN:
-            if (isdigit((unsigned char)ch)) {
-                min = 10 * min + char_to_int(ch);
-                ch = *format++;
-            } else if (ch == '*') {
-                min = va_arg(args, int);
-                ch = *format++;
-                state = DP_S_DOT;
-            } else
-                state = DP_S_DOT;
-            break;
-        case DP_S_DOT:
-            if (ch == '.') {
-                state = DP_S_MAX;
-                ch = *format++;
-            } else
-                state = DP_S_MOD;
-            break;
-        case DP_S_MAX:
-            if (isdigit((unsigned char)ch)) {
-                if (max < 0)
-                    max = 0;
-                max = 10 * max + char_to_int(ch);
-                ch = *format++;
-            } else if (ch == '*') {
-                max = va_arg(args, int);
-                ch = *format++;
-                state = DP_S_MOD;
-            } else
-                state = DP_S_MOD;
-            break;
-        case DP_S_MOD:
-            switch (ch) {
-            case 'h':
-                cflags = DP_C_SHORT;
-                ch = *format++;
-                break;
-            case 'l':
-                if (*format == 'l') {
-                    cflags = DP_C_LLONG;
-                    format++;
-                } else
-                    cflags = DP_C_LONG;
-                ch = *format++;
-                break;
-            case 'q':
-                cflags = DP_C_LLONG;
-                ch = *format++;
-                break;
-            case 'L':
-                cflags = DP_C_LDOUBLE;
-                ch = *format++;
-                break;
-            default:
-                break;
-            }
-            state = DP_S_CONV;
-            break;
-        case DP_S_CONV:
-            switch (ch) {
-            case 'd':
-            case 'i':
-                switch (cflags) {
-                case DP_C_SHORT:
-                    value = (short int)va_arg(args, int);
-                    break;
-                case DP_C_LONG:
-                    value = va_arg(args, long int);
-                    break;
-                case DP_C_LLONG:
-                    value = va_arg(args, LLONG);
-                    break;
-                default:
-                    value = va_arg(args, int);
-                    break;
-                }
-                fmtint(sbuffer, buffer, &currlen, maxlen,
-                       value, 10, min, max, flags);
-                break;
-            case 'X':
-                flags |= DP_F_UP;
-                /* FALLTHROUGH */
-            case 'x':
-            case 'o':
-            case 'u':
-                flags |= DP_F_UNSIGNED;
-                switch (cflags) {
-                case DP_C_SHORT:
-                    value = (unsigned short int)va_arg(args, unsigned int);
-                    break;
-                case DP_C_LONG:
-                    value = (LLONG) va_arg(args,
-                        unsigned long int);
-                    break;
-                case DP_C_LLONG:
-                    value = va_arg(args, unsigned LLONG);
-                    break;
-                default:
-                    value = (LLONG) va_arg(args,
-                        unsigned int);
-                    break;
-                }
-                fmtint(sbuffer, buffer, &currlen, maxlen, value,
-                       ch == 'o' ? 8 : (ch == 'u' ? 10 : 16),
-                       min, max, flags);
-                break;
-            case 'f':
-                if (cflags == DP_C_LDOUBLE)
-                    fvalue = va_arg(args, LDOUBLE);
-                else
-                    fvalue = va_arg(args, double);
-                fmtfp(sbuffer, buffer, &currlen, maxlen,
-                      fvalue, min, max, flags);
-                break;
-            case 'E':
-                flags |= DP_F_UP;
-            case 'e':
-                if (cflags == DP_C_LDOUBLE)
-                    fvalue = va_arg(args, LDOUBLE);
-                else
-                    fvalue = va_arg(args, double);
-                break;
-            case 'G':
-                flags |= DP_F_UP;
-            case 'g':
-                if (cflags == DP_C_LDOUBLE)
-                    fvalue = va_arg(args, LDOUBLE);
-                else
-                    fvalue = va_arg(args, double);
-                break;
-            case 'c':
-                doapr_outch(sbuffer, buffer, &currlen, maxlen,
-                    va_arg(args, int));
-                break;
-            case 's':
-                strvalue = va_arg(args, char *);
-                if (max < 0) {
-		    if (buffer)
-			max = INT_MAX;
-		    else
-			max = *maxlen;
-		}
-                fmtstr(sbuffer, buffer, &currlen, maxlen, strvalue,
-                       flags, min, max);
-                break;
-            case 'p':
-                value = (long)va_arg(args, void *);
-                fmtint(sbuffer, buffer, &currlen, maxlen,
-                    value, 16, min, max, flags|DP_F_NUM);
-                break;
-            case 'n': /* XXX */
-                if (cflags == DP_C_SHORT) {
-                    short int *num;
-                    num = va_arg(args, short int *);
-                    *num = currlen;
-                } else if (cflags == DP_C_LONG) { /* XXX */
-                    long int *num;
-                    num = va_arg(args, long int *);
-                    *num = (long int) currlen;
-                } else if (cflags == DP_C_LLONG) { /* XXX */
-                    LLONG *num;
-                    num = va_arg(args, LLONG *);
-                    *num = (LLONG) currlen;
-                } else {
-                    int    *num;
-                    num = va_arg(args, int *);
-                    *num = currlen;
-                }
-                break;
-            case '%':
-                doapr_outch(sbuffer, buffer, &currlen, maxlen, ch);
-                break;
-            case 'w':
-                /* not supported yet, treat as next char */
-                ch = *format++;
-                break;
-            default:
-                /* unknown, skip */
-                break;
-            }
-            ch = *format++;
-            state = DP_S_DEFAULT;
-            flags = cflags = min = 0;
-            max = -1;
-            break;
-        case DP_S_DONE:
-            break;
-        default:
-            break;
-        }
-    }
-    *truncated = (currlen > *maxlen - 1);
-    if (*truncated)
-        currlen = *maxlen - 1;
-    doapr_outch(sbuffer, buffer, &currlen, maxlen, '\0');
-    *retlen = currlen - 1;
-    return;
-}
-
-static void
-fmtstr(
-    char **sbuffer,
-    char **buffer,
-    size_t *currlen,
-    size_t *maxlen,
-    const char *value,
-    int flags,
-    int min,
-    int max)
-{
-    int padlen, strln;
-    int cnt = 0;
-
-    if (value == 0)
-        value = "<NULL>";
-    for (strln = 0; value[strln]; ++strln)
-        ;
-    padlen = min - strln;
-    if (padlen < 0)
-        padlen = 0;
-    if (flags & DP_F_MINUS)
-        padlen = -padlen;
-
-    while ((padlen > 0) && (cnt < max)) {
-        doapr_outch(sbuffer, buffer, currlen, maxlen, ' ');
-        --padlen;
-        ++cnt;
-    }
-    while (*value && (cnt < max)) {
-        doapr_outch(sbuffer, buffer, currlen, maxlen, *value++);
-        ++cnt;
-    }
-    while ((padlen < 0) && (cnt < max)) {
-        doapr_outch(sbuffer, buffer, currlen, maxlen, ' ');
-        ++padlen;
-        ++cnt;
-    }
-}
-
-static void
-fmtint(
-    char **sbuffer,
-    char **buffer,
-    size_t *currlen,
-    size_t *maxlen,
-    LLONG value,
-    int base,
-    int min,
-    int max,
-    int flags)
-{
-    int signvalue = 0;
-    const char *prefix = "";
-    unsigned LLONG uvalue;
-    char convert[DECIMAL_SIZE(value)+3];
-    int place = 0;
-    int spadlen = 0;
-    int zpadlen = 0;
-    int caps = 0;
-
-    if (max < 0)
-        max = 0;
-    uvalue = value;
-    if (!(flags & DP_F_UNSIGNED)) {
-        if (value < 0) {
-            signvalue = '-';
-            uvalue = -value;
-        } else if (flags & DP_F_PLUS)
-            signvalue = '+';
-        else if (flags & DP_F_SPACE)
-            signvalue = ' ';
-    }
-    if (flags & DP_F_NUM) {
-	if (base == 8) prefix = "0";
-	if (base == 16) prefix = "0x";
-    }
-    if (flags & DP_F_UP)
-        caps = 1;
-    do {
-        convert[place++] =
-            (caps ? "0123456789ABCDEF" : "0123456789abcdef")
-            [uvalue % (unsigned) base];
-        uvalue = (uvalue / (unsigned) base);
-    } while (uvalue && (place < (int)sizeof(convert)));
-    if (place == sizeof(convert))
-        place--;
-    convert[place] = 0;
-
-    zpadlen = max - place;
-    spadlen = min - OSSL_MAX(max, place) - (signvalue ? 1 : 0) - strlen(prefix);
-    if (zpadlen < 0)
-        zpadlen = 0;
-    if (spadlen < 0)
-        spadlen = 0;
-    if (flags & DP_F_ZERO) {
-        zpadlen = OSSL_MAX(zpadlen, spadlen);
-        spadlen = 0;
-    }
-    if (flags & DP_F_MINUS)
-        spadlen = -spadlen;
-
-    /* spaces */
-    while (spadlen > 0) {
-        doapr_outch(sbuffer, buffer, currlen, maxlen, ' ');
-        --spadlen;
-    }
-
-    /* sign */
-    if (signvalue)
-        doapr_outch(sbuffer, buffer, currlen, maxlen, signvalue);
-
-    /* prefix */
-    while (*prefix) {
-	doapr_outch(sbuffer, buffer, currlen, maxlen, *prefix);
-	prefix++;
-    }
-
-    /* zeros */
-    if (zpadlen > 0) {
-        while (zpadlen > 0) {
-            doapr_outch(sbuffer, buffer, currlen, maxlen, '0');
-            --zpadlen;
-        }
-    }
-    /* digits */
-    while (place > 0)
-        doapr_outch(sbuffer, buffer, currlen, maxlen, convert[--place]);
-
-    /* left justified spaces */
-    while (spadlen < 0) {
-        doapr_outch(sbuffer, buffer, currlen, maxlen, ' ');
-        ++spadlen;
-    }
-    return;
-}
-
-static LDOUBLE
-abs_val(LDOUBLE value)
-{
-    LDOUBLE result = value;
-    if (value < 0)
-        result = -value;
-    return result;
-}
-
-static LDOUBLE
-pow_10(int in_exp)
-{
-    LDOUBLE result = 1;
-    while (in_exp) {
-        result *= 10;
-        in_exp--;
-    }
-    return result;
-}
-
-static long
-roundv(LDOUBLE value)
-{
-    long intpart;
-    intpart = (long) value;
-    value = value - intpart;
-    if (value >= 0.5)
-        intpart++;
-    return intpart;
-}
-
-static void
-fmtfp(
-    char **sbuffer,
-    char **buffer,
-    size_t *currlen,
-    size_t *maxlen,
-    LDOUBLE fvalue,
-    int min,
-    int max,
-    int flags)
-{
-    int signvalue = 0;
-    LDOUBLE ufvalue;
-    char iconvert[20];
-    char fconvert[20];
-    int iplace = 0;
-    int fplace = 0;
-    int padlen = 0;
-    int zpadlen = 0;
-    int caps = 0;
-    long intpart;
-    long fracpart;
-    long max10;
-
-    if (max < 0)
-        max = 6;
-    ufvalue = abs_val(fvalue);
-    if (fvalue < 0)
-        signvalue = '-';
-    else if (flags & DP_F_PLUS)
-        signvalue = '+';
-    else if (flags & DP_F_SPACE)
-        signvalue = ' ';
-
-    intpart = (long)ufvalue;
-
-    /* sorry, we only support 9 digits past the decimal because of our
-       conversion method */
-    if (max > 9)
-        max = 9;
-
-    /* we "cheat" by converting the fractional part to integer by
-       multiplying by a factor of 10 */
-    max10 = roundv(pow_10(max));
-    fracpart = roundv(pow_10(max) * (ufvalue - intpart));
-
-    if (fracpart >= max10) {
-        intpart++;
-        fracpart -= max10;
-    }
-
-    /* convert integer part */
-    do {
-        iconvert[iplace++] =
-            (caps ? "0123456789ABCDEF"
-              : "0123456789abcdef")[intpart % 10];
-        intpart = (intpart / 10);
-    } while (intpart && (iplace < (int)sizeof(iconvert)));
-    if (iplace == sizeof iconvert)
-        iplace--;
-    iconvert[iplace] = 0;
-
-    /* convert fractional part */
-    do {
-        fconvert[fplace++] =
-            (caps ? "0123456789ABCDEF"
-              : "0123456789abcdef")[fracpart % 10];
-        fracpart = (fracpart / 10);
-    } while (fplace < max);
-    if (fplace == sizeof fconvert)
-        fplace--;
-    fconvert[fplace] = 0;
-
-    /* -1 for decimal point, another -1 if we are printing a sign */
-    padlen = min - iplace - max - 1 - ((signvalue) ? 1 : 0);
-    zpadlen = max - fplace;
-    if (zpadlen < 0)
-        zpadlen = 0;
-    if (padlen < 0)
-        padlen = 0;
-    if (flags & DP_F_MINUS)
-        padlen = -padlen;
-
-    if ((flags & DP_F_ZERO) && (padlen > 0)) {
-        if (signvalue) {
-            doapr_outch(sbuffer, buffer, currlen, maxlen, signvalue);
-            --padlen;
-            signvalue = 0;
-        }
-        while (padlen > 0) {
-            doapr_outch(sbuffer, buffer, currlen, maxlen, '0');
-            --padlen;
-        }
-    }
-    while (padlen > 0) {
-        doapr_outch(sbuffer, buffer, currlen, maxlen, ' ');
-        --padlen;
-    }
-    if (signvalue)
-        doapr_outch(sbuffer, buffer, currlen, maxlen, signvalue);
-
-    while (iplace > 0)
-        doapr_outch(sbuffer, buffer, currlen, maxlen, iconvert[--iplace]);
-
-    /*
-     * Decimal point. This should probably use locale to find the correct
-     * char to print out.
-     */
-    if (max > 0 || (flags & DP_F_NUM)) {
-        doapr_outch(sbuffer, buffer, currlen, maxlen, '.');
-
-        while (fplace > 0)
-            doapr_outch(sbuffer, buffer, currlen, maxlen, fconvert[--fplace]);
-    }
-    while (zpadlen > 0) {
-        doapr_outch(sbuffer, buffer, currlen, maxlen, '0');
-        --zpadlen;
-    }
-
-    while (padlen < 0) {
-        doapr_outch(sbuffer, buffer, currlen, maxlen, ' ');
-        ++padlen;
-    }
-}
-
-static void
-doapr_outch(
-    char **sbuffer,
-    char **buffer,
-    size_t *currlen,
-    size_t *maxlen,
-    int c)
-{
-    /* If we haven't at least one buffer, someone has doe a big booboo */
-    assert(*sbuffer != NULL || buffer != NULL);
-
-    if (buffer) {
-	while (*currlen >= *maxlen) {
-	    if (*buffer == NULL) {
-		if (*maxlen == 0)
-		    *maxlen = 1024;
-		*buffer = OPENSSL_malloc(*maxlen);
-		if (*currlen > 0) {
-		    assert(*sbuffer != NULL);
-		    memcpy(*buffer, *sbuffer, *currlen);
-		}
-		*sbuffer = NULL;
-	    } else {
-		*maxlen += 1024;
-		*buffer = OPENSSL_realloc(*buffer, *maxlen);
-	    }
-	}
-	/* What to do if *buffer is NULL? */
-	assert(*sbuffer != NULL || *buffer != NULL);
-    }
-
-    if (*currlen < *maxlen) {
-	if (*sbuffer)
-	    (*sbuffer)[(*currlen)++] = (char)c;
-	else
-	    (*buffer)[(*currlen)++] = (char)c;
-    }
-
-    return;
-}
-
-/***************************************************************************/
-
-int BIO_printf (BIO *bio, const char *format, ...)
-	{
-	va_list args;
-	int ret;
-
-	va_start(args, format);
-
-	ret = BIO_vprintf(bio, format, args);
-
-	va_end(args);
-	return(ret);
-	}
-
-int BIO_vprintf (BIO *bio, const char *format, va_list args)
-	{
-	int ret;
-	size_t retlen;
-	char hugebuf[1024*2];	/* Was previously 10k, which is unreasonable
-				   in small-stack environments, like threads
-				   or DOS programs. */
-	char *hugebufp = hugebuf;
-	size_t hugebufsize = sizeof(hugebuf);
-	char *dynbuf = NULL;
-	int ignored;
-
-	dynbuf = NULL;
-	CRYPTO_push_info("doapr()");
-	_dopr(&hugebufp, &dynbuf, &hugebufsize,
-		&retlen, &ignored, format, args);
-	if (dynbuf)
-		{
-		ret=BIO_write(bio, dynbuf, (int)retlen);
-		OPENSSL_free(dynbuf);
-		}
-	else
-		{
-		ret=BIO_write(bio, hugebuf, (int)retlen);
-		}
-	CRYPTO_pop_info();
-	return(ret);
-	}
-
-/* As snprintf is not available everywhere, we provide our own implementation.
- * This function has nothing to do with BIOs, but it's closely related
- * to BIO_printf, and we need *some* name prefix ...
- * (XXX  the function should be renamed, but to what?) */
-int BIO_snprintf(char *buf, size_t n, const char *format, ...)
-	{
-	va_list args;
-	int ret;
-
-	va_start(args, format);
-
-	ret = BIO_vsnprintf(buf, n, format, args);
-
-	va_end(args);
-	return(ret);
-	}
-
-int BIO_vsnprintf(char *buf, size_t n, const char *format, va_list args)
-	{
-	size_t retlen;
-	int truncated;
-
-	_dopr(&buf, NULL, &n, &retlen, &truncated, format, args);
-
-	if (truncated)
-		/* In case of truncation, return -1 like traditional snprintf.
-		 * (Current drafts for ISO/IEC 9899 say snprintf should return
-		 * the number of characters that would have been written,
-		 * had the buffer been large enough.) */
-		return -1;
-	else
-		return (retlen <= INT_MAX) ? (int)retlen : -1;
-	}
diff --git a/crypto/openssl/crypto/bio/b_sock.c b/crypto/openssl/crypto/bio/b_sock.c
deleted file mode 100644
index 4b3860b991e3..000000000000
--- a/crypto/openssl/crypto/bio/b_sock.c
+++ /dev/null
@@ -1,786 +0,0 @@
-/* crypto/bio/b_sock.c */
-/* Copyright (C) 1995-1998 Eric Young (eay@cryptsoft.com)
- * All rights reserved.
- *
- * This package is an SSL implementation written
- * by Eric Young (eay@cryptsoft.com).
- * The implementation was written so as to conform with Netscapes SSL.
- * 
- * This library is free for commercial and non-commercial use as long as
- * the following conditions are aheared to.  The following conditions
- * apply to all code found in this distribution, be it the RC4, RSA,
- * lhash, DES, etc., code; not just the SSL code.  The SSL documentation
- * included with this distribution is covered by the same copyright terms
- * except that the holder is Tim Hudson (tjh@cryptsoft.com).
- * 
- * Copyright remains Eric Young's, and as such any Copyright notices in
- * the code are not to be removed.
- * If this package is used in a product, Eric Young should be given attribution
- * as the author of the parts of the library used.
- * This can be in the form of a textual message at program startup or
- * in documentation (online or textual) provided with the package.
- * 
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions
- * are met:
- * 1. Redistributions of source code must retain the copyright
- *    notice, this list of conditions and the following disclaimer.
- * 2. Redistributions in binary form must reproduce the above copyright
- *    notice, this list of conditions and the following disclaimer in the
- *    documentation and/or other materials provided with the distribution.
- * 3. All advertising materials mentioning features or use of this software
- *    must display the following acknowledgement:
- *    "This product includes cryptographic software written by
- *     Eric Young (eay@cryptsoft.com)"
- *    The word 'cryptographic' can be left out if the rouines from the library
- *    being used are not cryptographic related :-).
- * 4. If you include any Windows specific code (or a derivative thereof) from 
- *    the apps directory (application code) you must include an acknowledgement:
- *    "This product includes software written by Tim Hudson (tjh@cryptsoft.com)"
- * 
- * THIS SOFTWARE IS PROVIDED BY ERIC YOUNG ``AS IS'' AND
- * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
- * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
- * ARE DISCLAIMED.  IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE
- * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
- * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
- * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
- * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
- * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
- * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
- * SUCH DAMAGE.
- * 
- * The licence and distribution terms for any publically available version or
- * derivative of this code cannot be changed.  i.e. this code cannot simply be
- * copied and put under another distribution licence
- * [including the GNU Public Licence.]
- */
-
-#include <stdio.h>
-#include <stdlib.h>
-#include <errno.h>
-#define USE_SOCKETS
-#include "cryptlib.h"
-#include <openssl/bio.h>
-#if defined(OPENSSL_SYS_NETWARE) && defined(NETWARE_BSDSOCK)
-#include "netdb.h"
-#endif
-
-#ifndef OPENSSL_NO_SOCK
-
-#ifdef OPENSSL_SYS_WIN16
-#define SOCKET_PROTOCOL 0 /* more microsoft stupidity */
-#else
-#define SOCKET_PROTOCOL IPPROTO_TCP
-#endif
-
-#ifdef SO_MAXCONN
-#define MAX_LISTEN  SO_MAXCONN
-#elif defined(SOMAXCONN)
-#define MAX_LISTEN  SOMAXCONN
-#else
-#define MAX_LISTEN  32
-#endif
-
-#if defined(OPENSSL_SYS_WINDOWS) || (defined(OPENSSL_SYS_NETWARE) && !defined(NETWARE_BSDSOCK))
-static int wsa_init_done=0;
-#endif
-
-#if 0
-static unsigned long BIO_ghbn_hits=0L;
-static unsigned long BIO_ghbn_miss=0L;
-
-#define GHBN_NUM	4
-static struct ghbn_cache_st
-	{
-	char name[129];
-	struct hostent *ent;
-	unsigned long order;
-	} ghbn_cache[GHBN_NUM];
-#endif
-
-static int get_ip(const char *str,unsigned char *ip);
-#if 0
-static void ghbn_free(struct hostent *a);
-static struct hostent *ghbn_dup(struct hostent *a);
-#endif
-int BIO_get_host_ip(const char *str, unsigned char *ip)
-	{
-	int i;
-	int err = 1;
-	int locked = 0;
-	struct hostent *he;
-
-	i=get_ip(str,ip);
-	if (i < 0)
-		{
-		BIOerr(BIO_F_BIO_GET_HOST_IP,BIO_R_INVALID_IP_ADDRESS);
-		goto err;
-		}
-
-	/* At this point, we have something that is most probably correct
-	   in some way, so let's init the socket. */
-	if (BIO_sock_init() != 1)
-		return 0; /* don't generate another error code here */
-
-	/* If the string actually contained an IP address, we need not do
-	   anything more */
-	if (i > 0) return(1);
-
-	/* do a gethostbyname */
-	CRYPTO_w_lock(CRYPTO_LOCK_GETHOSTBYNAME);
-	locked = 1;
-	he=BIO_gethostbyname(str);
-	if (he == NULL)
-		{
-		BIOerr(BIO_F_BIO_GET_HOST_IP,BIO_R_BAD_HOSTNAME_LOOKUP);
-		goto err;
-		}
-
-	/* cast to short because of win16 winsock definition */
-	if ((short)he->h_addrtype != AF_INET)
-		{
-		BIOerr(BIO_F_BIO_GET_HOST_IP,BIO_R_GETHOSTBYNAME_ADDR_IS_NOT_AF_INET);
-		goto err;
-		}
-	for (i=0; i<4; i++)
-		ip[i]=he->h_addr_list[0][i];
-	err = 0;
-
- err:
-	if (locked)
-		CRYPTO_w_unlock(CRYPTO_LOCK_GETHOSTBYNAME);
-	if (err)
-		{
-		ERR_add_error_data(2,"host=",str);
-		return 0;
-		}
-	else
-		return 1;
-	}
-
-int BIO_get_port(const char *str, unsigned short *port_ptr)
-	{
-	int i;
-	struct servent *s;
-
-	if (str == NULL)
-		{
-		BIOerr(BIO_F_BIO_GET_PORT,BIO_R_NO_PORT_DEFINED);
-		return(0);
-		}
-	i=atoi(str);
-	if (i != 0)
-		*port_ptr=(unsigned short)i;
-	else
-		{
-		CRYPTO_w_lock(CRYPTO_LOCK_GETSERVBYNAME);
-		/* Note: under VMS with SOCKETSHR, it seems like the first
-		 * parameter is 'char *', instead of 'const char *'
-		 */
- 		s=getservbyname(
-#ifndef CONST_STRICT
-		    (char *)
-#endif
-		    str,"tcp");
-		if(s != NULL)
-			*port_ptr=ntohs((unsigned short)s->s_port);
-		CRYPTO_w_unlock(CRYPTO_LOCK_GETSERVBYNAME);
-		if(s == NULL)
-			{
-			if (strcmp(str,"http") == 0)
-				*port_ptr=80;
-			else if (strcmp(str,"telnet") == 0)
-				*port_ptr=23;
-			else if (strcmp(str,"socks") == 0)
-				*port_ptr=1080;
-			else if (strcmp(str,"https") == 0)
-				*port_ptr=443;
-			else if (strcmp(str,"ssl") == 0)
-				*port_ptr=443;
-			else if (strcmp(str,"ftp") == 0)
-				*port_ptr=21;
-			else if (strcmp(str,"gopher") == 0)
-				*port_ptr=70;
-#if 0
-			else if (strcmp(str,"wais") == 0)
-				*port_ptr=21;
-#endif
-			else
-				{
-				SYSerr(SYS_F_GETSERVBYNAME,get_last_socket_error());
-				ERR_add_error_data(3,"service='",str,"'");
-				return(0);
-				}
-			}
-		}
-	return(1);
-	}
-
-int BIO_sock_error(int sock)
-	{
-	int j,i;
-	int size;
-		 
-	size=sizeof(int);
-	/* Note: under Windows the third parameter is of type (char *)
-	 * whereas under other systems it is (void *) if you don't have
-	 * a cast it will choke the compiler: if you do have a cast then
-	 * you can either go for (char *) or (void *).
-	 */
-	i=getsockopt(sock,SOL_SOCKET,SO_ERROR,(void *)&j,(void *)&size);
-	if (i < 0)
-		return(1);
-	else
-		return(j);
-	}
-
-#if 0
-long BIO_ghbn_ctrl(int cmd, int iarg, char *parg)
-	{
-	int i;
-	char **p;
-
-	switch (cmd)
-		{
-	case BIO_GHBN_CTRL_HITS:
-		return(BIO_ghbn_hits);
-		/* break; */
-	case BIO_GHBN_CTRL_MISSES:
-		return(BIO_ghbn_miss);
-		/* break; */
-	case BIO_GHBN_CTRL_CACHE_SIZE:
-		return(GHBN_NUM);
-		/* break; */
-	case BIO_GHBN_CTRL_GET_ENTRY:
-		if ((iarg >= 0) && (iarg <GHBN_NUM) &&
-			(ghbn_cache[iarg].order > 0))
-			{
-			p=(char **)parg;
-			if (p == NULL) return(0);
-			*p=ghbn_cache[iarg].name;
-			ghbn_cache[iarg].name[128]='\0';
-			return(1);
-			}
-		return(0);
-		/* break; */
-	case BIO_GHBN_CTRL_FLUSH:
-		for (i=0; i<GHBN_NUM; i++)
-			ghbn_cache[i].order=0;
-		break;
-	default:
-		return(0);
-		}
-	return(1);
-	}
-#endif
-
-#if 0
-static struct hostent *ghbn_dup(struct hostent *a)
-	{
-	struct hostent *ret;
-	int i,j;
-
-	MemCheck_off();
-	ret=(struct hostent *)OPENSSL_malloc(sizeof(struct hostent));
-	if (ret == NULL) return(NULL);
-	memset(ret,0,sizeof(struct hostent));
-
-	for (i=0; a->h_aliases[i] != NULL; i++)
-		;
-	i++;
-	ret->h_aliases = (char **)OPENSSL_malloc(i*sizeof(char *));
-	if (ret->h_aliases == NULL)
-		goto err;
-	memset(ret->h_aliases, 0, i*sizeof(char *));
-
-	for (i=0; a->h_addr_list[i] != NULL; i++)
-		;
-	i++;
-	ret->h_addr_list=(char **)OPENSSL_malloc(i*sizeof(char *));
-	if (ret->h_addr_list == NULL)
-		goto err;
-	memset(ret->h_addr_list, 0, i*sizeof(char *));
-
-	j=strlen(a->h_name)+1;
-	if ((ret->h_name=OPENSSL_malloc(j)) == NULL) goto err;
-	memcpy((char *)ret->h_name,a->h_name,j);
-	for (i=0; a->h_aliases[i] != NULL; i++)
-		{
-		j=strlen(a->h_aliases[i])+1;
-		if ((ret->h_aliases[i]=OPENSSL_malloc(j)) == NULL) goto err;
-		memcpy(ret->h_aliases[i],a->h_aliases[i],j);
-		}
-	ret->h_length=a->h_length;
-	ret->h_addrtype=a->h_addrtype;
-	for (i=0; a->h_addr_list[i] != NULL; i++)
-		{
-		if ((ret->h_addr_list[i]=OPENSSL_malloc(a->h_length)) == NULL)
-			goto err;
-		memcpy(ret->h_addr_list[i],a->h_addr_list[i],a->h_length);
-		}
-	if (0)
-		{
-err:	
-		if (ret != NULL)
-			ghbn_free(ret);
-		ret=NULL;
-		}
-	MemCheck_on();
-	return(ret);
-	}
-
-static void ghbn_free(struct hostent *a)
-	{
-	int i;
-
-	if(a == NULL)
-	    return;
-
-	if (a->h_aliases != NULL)
-		{
-		for (i=0; a->h_aliases[i] != NULL; i++)
-			OPENSSL_free(a->h_aliases[i]);
-		OPENSSL_free(a->h_aliases);
-		}
-	if (a->h_addr_list != NULL)
-		{
-		for (i=0; a->h_addr_list[i] != NULL; i++)
-			OPENSSL_free(a->h_addr_list[i]);
-		OPENSSL_free(a->h_addr_list);
-		}
-	if (a->h_name != NULL) OPENSSL_free(a->h_name);
-	OPENSSL_free(a);
-	}
-
-#endif
-
-struct hostent *BIO_gethostbyname(const char *name)
-	{
-#if 1
-	/* Caching gethostbyname() results forever is wrong,
-	 * so we have to let the true gethostbyname() worry about this */
-	return gethostbyname(name);
-#else
-	struct hostent *ret;
-	int i,lowi=0,j;
-	unsigned long low= (unsigned long)-1;
-
-
-#  if 0
-	/* It doesn't make sense to use locking here: The function interface
-	 * is not thread-safe, because threads can never be sure when
-	 * some other thread destroys the data they were given a pointer to.
-	 */
-	CRYPTO_w_lock(CRYPTO_LOCK_GETHOSTBYNAME);
-#  endif
-	j=strlen(name);
-	if (j < 128)
-		{
-		for (i=0; i<GHBN_NUM; i++)
-			{
-			if (low > ghbn_cache[i].order)
-				{
-				low=ghbn_cache[i].order;
-				lowi=i;
-				}
-			if (ghbn_cache[i].order > 0)
-				{
-				if (strncmp(name,ghbn_cache[i].name,128) == 0)
-					break;
-				}
-			}
-		}
-	else
-		i=GHBN_NUM;
-
-	if (i == GHBN_NUM) /* no hit*/
-		{
-		BIO_ghbn_miss++;
-		/* Note: under VMS with SOCKETSHR, it seems like the first
-		 * parameter is 'char *', instead of 'const char *'
-		 */
-		ret=gethostbyname(
-#  ifndef CONST_STRICT
-		    (char *)
-#  endif
-		    name);
-
-		if (ret == NULL)
-			goto end;
-		if (j > 128) /* too big to cache */
-			{
-#  if 0
-			/* If we were trying to make this function thread-safe (which
-			 * is bound to fail), we'd have to give up in this case
-			 * (or allocate more memory). */
-			ret = NULL;
-#  endif
-			goto end;
-			}
-
-		/* else add to cache */
-		if (ghbn_cache[lowi].ent != NULL)
-			ghbn_free(ghbn_cache[lowi].ent); /* XXX not thread-safe */
-		ghbn_cache[lowi].name[0] = '\0';
-
-		if((ret=ghbn_cache[lowi].ent=ghbn_dup(ret)) == NULL)
-			{
-			BIOerr(BIO_F_BIO_GETHOSTBYNAME,ERR_R_MALLOC_FAILURE);
-			goto end;
-			}
-		strncpy(ghbn_cache[lowi].name,name,128);
-		ghbn_cache[lowi].order=BIO_ghbn_miss+BIO_ghbn_hits;
-		}
-	else
-		{
-		BIO_ghbn_hits++;
-		ret= ghbn_cache[i].ent;
-		ghbn_cache[i].order=BIO_ghbn_miss+BIO_ghbn_hits;
-		}
-end:
-#  if 0
-	CRYPTO_w_unlock(CRYPTO_LOCK_GETHOSTBYNAME);
-#  endif
-	return(ret);
-#endif
-	}
-
-
-int BIO_sock_init(void)
-	{
-#ifdef OPENSSL_SYS_WINDOWS
-	static struct WSAData wsa_state;
-
-	if (!wsa_init_done)
-		{
-		int err;
-	  
-#ifdef SIGINT
-		signal(SIGINT,(void (*)(int))BIO_sock_cleanup);
-#endif
-		wsa_init_done=1;
-		memset(&wsa_state,0,sizeof(wsa_state));
-		if (WSAStartup(0x0101,&wsa_state)!=0)
-			{
-			err=WSAGetLastError();
-			SYSerr(SYS_F_WSASTARTUP,err);
-			BIOerr(BIO_F_BIO_SOCK_INIT,BIO_R_WSASTARTUP);
-			return(-1);
-			}
-		}
-#endif /* OPENSSL_SYS_WINDOWS */
-#ifdef WATT32
-	extern int _watt_do_exit;
-	_watt_do_exit = 0;    /* don't make sock_init() call exit() */
-	if (sock_init())
-		return (-1);
-#endif
-
-#if defined(OPENSSL_SYS_NETWARE) && !defined(NETWARE_BSDSOCK)
-    WORD wVerReq;
-    WSADATA wsaData;
-    int err;
-
-    if (!wsa_init_done)
-    {
-   
-# ifdef SIGINT
-        signal(SIGINT,(void (*)(int))BIO_sock_cleanup);
-# endif
-
-        wsa_init_done=1;
-        wVerReq = MAKEWORD( 2, 0 );
-        err = WSAStartup(wVerReq,&wsaData);
-        if (err != 0)
-        {
-            SYSerr(SYS_F_WSASTARTUP,err);
-            BIOerr(BIO_F_BIO_SOCK_INIT,BIO_R_WSASTARTUP);
-            return(-1);
-			}
-		}
-#endif
-
-	return(1);
-	}
-
-void BIO_sock_cleanup(void)
-	{
-#ifdef OPENSSL_SYS_WINDOWS
-	if (wsa_init_done)
-		{
-		wsa_init_done=0;
-#ifndef OPENSSL_SYS_WINCE
-		WSACancelBlockingCall();
-#endif
-		WSACleanup();
-		}
-#elif defined(OPENSSL_SYS_NETWARE) && !defined(NETWARE_BSDSOCK)
-   if (wsa_init_done)
-        {
-        wsa_init_done=0;
-        WSACleanup();
-		}
-#endif
-	}
-
-#if !defined(OPENSSL_SYS_VMS) || __VMS_VER >= 70000000
-
-int BIO_socket_ioctl(int fd, long type, void *arg)
-	{
-	int i;
-
-#ifdef __DJGPP__
-	i=ioctlsocket(fd,type,(char *)arg);
-#else
-	i=ioctlsocket(fd,type,arg);
-#endif /* __DJGPP__ */
-	if (i < 0)
-		SYSerr(SYS_F_IOCTLSOCKET,get_last_socket_error());
-	return(i);
-	}
-#endif /* __VMS_VER */
-
-/* The reason I have implemented this instead of using sscanf is because
- * Visual C 1.52c gives an unresolved external when linking a DLL :-( */
-static int get_ip(const char *str, unsigned char ip[4])
-	{
-	unsigned int tmp[4];
-	int num=0,c,ok=0;
-
-	tmp[0]=tmp[1]=tmp[2]=tmp[3]=0;
-
-	for (;;)
-		{
-		c= *(str++);
-		if ((c >= '0') && (c <= '9'))
-			{
-			ok=1;
-			tmp[num]=tmp[num]*10+c-'0';
-			if (tmp[num] > 255) return(0);
-			}
-		else if (c == '.')
-			{
-			if (!ok) return(-1);
-			if (num == 3) return(0);
-			num++;
-			ok=0;
-			}
-		else if (c == '\0' && (num == 3) && ok)
-			break;
-		else
-			return(0);
-		}
-	ip[0]=tmp[0];
-	ip[1]=tmp[1];
-	ip[2]=tmp[2];
-	ip[3]=tmp[3];
-	return(1);
-	}
-
-int BIO_get_accept_socket(char *host, int bind_mode)
-	{
-	int ret=0;
-	struct sockaddr_in server,client;
-	int s=INVALID_SOCKET,cs;
-	unsigned char ip[4];
-	unsigned short port;
-	char *str=NULL,*e;
-	const char *h,*p;
-	unsigned long l;
-	int err_num;
-
-	if (BIO_sock_init() != 1) return(INVALID_SOCKET);
-
-	if ((str=BUF_strdup(host)) == NULL) return(INVALID_SOCKET);
-
-	h=p=NULL;
-	h=str;
-	for (e=str; *e; e++)
-		{
-		if (*e == ':')
-			{
-			p= &(e[1]);
-			*e='\0';
-			}
-		else if (*e == '/')
-			{
-			*e='\0';
-			break;
-			}
-		}
-
-	if (p == NULL)
-		{
-		p=h;
-		h="*";
-		}
-
-	if (!BIO_get_port(p,&port)) goto err;
-
-	memset((char *)&server,0,sizeof(server));
-	server.sin_family=AF_INET;
-	server.sin_port=htons(port);
-
-	if (strcmp(h,"*") == 0)
-		server.sin_addr.s_addr=INADDR_ANY;
-	else
-		{
-                if (!BIO_get_host_ip(h,&(ip[0]))) goto err;
-		l=(unsigned long)
-			((unsigned long)ip[0]<<24L)|
-			((unsigned long)ip[1]<<16L)|
-			((unsigned long)ip[2]<< 8L)|
-			((unsigned long)ip[3]);
-		server.sin_addr.s_addr=htonl(l);
-		}
-
-again:
-	s=socket(AF_INET,SOCK_STREAM,SOCKET_PROTOCOL);
-	if (s == INVALID_SOCKET)
-		{
-		SYSerr(SYS_F_SOCKET,get_last_socket_error());
-		ERR_add_error_data(3,"port='",host,"'");
-		BIOerr(BIO_F_BIO_GET_ACCEPT_SOCKET,BIO_R_UNABLE_TO_CREATE_SOCKET);
-		goto err;
-		}
-
-#ifdef SO_REUSEADDR
-	if (bind_mode == BIO_BIND_REUSEADDR)
-		{
-		int i=1;
-
-		ret=setsockopt(s,SOL_SOCKET,SO_REUSEADDR,(char *)&i,sizeof(i));
-		bind_mode=BIO_BIND_NORMAL;
-		}
-#endif
-	if (bind(s,(struct sockaddr *)&server,sizeof(server)) == -1)
-		{
-#ifdef SO_REUSEADDR
-		err_num=get_last_socket_error();
-		if ((bind_mode == BIO_BIND_REUSEADDR_IF_UNUSED) &&
-			(err_num == EADDRINUSE))
-			{
-			memcpy((char *)&client,(char *)&server,sizeof(server));
-			if (strcmp(h,"*") == 0)
-				client.sin_addr.s_addr=htonl(0x7F000001);
-			cs=socket(AF_INET,SOCK_STREAM,SOCKET_PROTOCOL);
-			if (cs != INVALID_SOCKET)
-				{
-				int ii;
-				ii=connect(cs,(struct sockaddr *)&client,
-					sizeof(client));
-				closesocket(cs);
-				if (ii == INVALID_SOCKET)
-					{
-					bind_mode=BIO_BIND_REUSEADDR;
-					closesocket(s);
-					goto again;
-					}
-				/* else error */
-				}
-			/* else error */
-			}
-#endif
-		SYSerr(SYS_F_BIND,err_num);
-		ERR_add_error_data(3,"port='",host,"'");
-		BIOerr(BIO_F_BIO_GET_ACCEPT_SOCKET,BIO_R_UNABLE_TO_BIND_SOCKET);
-		goto err;
-		}
-	if (listen(s,MAX_LISTEN) == -1)
-		{
-		SYSerr(SYS_F_BIND,get_last_socket_error());
-		ERR_add_error_data(3,"port='",host,"'");
-		BIOerr(BIO_F_BIO_GET_ACCEPT_SOCKET,BIO_R_UNABLE_TO_LISTEN_SOCKET);
-		goto err;
-		}
-	ret=1;
-err:
-	if (str != NULL) OPENSSL_free(str);
-	if ((ret == 0) && (s != INVALID_SOCKET))
-		{
-		closesocket(s);
-		s= INVALID_SOCKET;
-		}
-	return(s);
-	}
-
-int BIO_accept(int sock, char **addr)
-	{
-	int ret=INVALID_SOCKET;
-	static struct sockaddr_in from;
-	unsigned long l;
-	unsigned short port;
-	int len;
-	char *p;
-
-	memset((char *)&from,0,sizeof(from));
-	len=sizeof(from);
-	/* Note: under VMS with SOCKETSHR the fourth parameter is currently
-	 * of type (int *) whereas under other systems it is (void *) if
-	 * you don't have a cast it will choke the compiler: if you do
-	 * have a cast then you can either go for (int *) or (void *).
-	 */
-	ret=accept(sock,(struct sockaddr *)&from,(void *)&len);
-	if (ret == INVALID_SOCKET)
-		{
-		if(BIO_sock_should_retry(ret)) return -2;
-		SYSerr(SYS_F_ACCEPT,get_last_socket_error());
-		BIOerr(BIO_F_BIO_ACCEPT,BIO_R_ACCEPT_ERROR);
-		goto end;
-		}
-
-	if (addr == NULL) goto end;
-
-	l=ntohl(from.sin_addr.s_addr);
-	port=ntohs(from.sin_port);
-	if (*addr == NULL)
-		{
-		if ((p=OPENSSL_malloc(24)) == NULL)
-			{
-			BIOerr(BIO_F_BIO_ACCEPT,ERR_R_MALLOC_FAILURE);
-			goto end;
-			}
-		*addr=p;
-		}
-	BIO_snprintf(*addr,24,"%d.%d.%d.%d:%d",
-		     (unsigned char)(l>>24L)&0xff,
-		     (unsigned char)(l>>16L)&0xff,
-		     (unsigned char)(l>> 8L)&0xff,
-		     (unsigned char)(l     )&0xff,
-		     port);
-end:
-	return(ret);
-	}
-
-int BIO_set_tcp_ndelay(int s, int on)
-	{
-	int ret=0;
-#if defined(TCP_NODELAY) && (defined(IPPROTO_TCP) || defined(SOL_TCP))
-	int opt;
-
-#ifdef SOL_TCP
-	opt=SOL_TCP;
-#else
-#ifdef IPPROTO_TCP
-	opt=IPPROTO_TCP;
-#endif
-#endif
-	
-	ret=setsockopt(s,opt,TCP_NODELAY,(char *)&on,sizeof(on));
-#endif
-	return(ret == 0);
-	}
-#endif
-
-int BIO_socket_nbio(int s, int mode)
-	{
-	int ret= -1;
-	int l;
-
-	l=mode;
-#ifdef FIONBIO
-	ret=BIO_socket_ioctl(s,FIONBIO,&l);
-#endif
-	return(ret == 0);
-	}
diff --git a/crypto/openssl/crypto/bio/bf_buff.c b/crypto/openssl/crypto/bio/bf_buff.c
deleted file mode 100644
index c1fd75aaad80..000000000000
--- a/crypto/openssl/crypto/bio/bf_buff.c
+++ /dev/null
@@ -1,511 +0,0 @@
-/* crypto/bio/bf_buff.c */
-/* Copyright (C) 1995-1998 Eric Young (eay@cryptsoft.com)
- * All rights reserved.
- *
- * This package is an SSL implementation written
- * by Eric Young (eay@cryptsoft.com).
- * The implementation was written so as to conform with Netscapes SSL.
- * 
- * This library is free for commercial and non-commercial use as long as
- * the following conditions are aheared to.  The following conditions
- * apply to all code found in this distribution, be it the RC4, RSA,
- * lhash, DES, etc., code; not just the SSL code.  The SSL documentation
- * included with this distribution is covered by the same copyright terms
- * except that the holder is Tim Hudson (tjh@cryptsoft.com).
- * 
- * Copyright remains Eric Young's, and as such any Copyright notices in
- * the code are not to be removed.
- * If this package is used in a product, Eric Young should be given attribution
- * as the author of the parts of the library used.
- * This can be in the form of a textual message at program startup or
- * in documentation (online or textual) provided with the package.
- * 
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions
- * are met:
- * 1. Redistributions of source code must retain the copyright
- *    notice, this list of conditions and the following disclaimer.
- * 2. Redistributions in binary form must reproduce the above copyright
- *    notice, this list of conditions and the following disclaimer in the
- *    documentation and/or other materials provided with the distribution.
- * 3. All advertising materials mentioning features or use of this software
- *    must display the following acknowledgement:
- *    "This product includes cryptographic software written by
- *     Eric Young (eay@cryptsoft.com)"
- *    The word 'cryptographic' can be left out if the rouines from the library
- *    being used are not cryptographic related :-).
- * 4. If you include any Windows specific code (or a derivative thereof) from 
- *    the apps directory (application code) you must include an acknowledgement:
- *    "This product includes software written by Tim Hudson (tjh@cryptsoft.com)"
- * 
- * THIS SOFTWARE IS PROVIDED BY ERIC YOUNG ``AS IS'' AND
- * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
- * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
- * ARE DISCLAIMED.  IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE
- * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
- * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
- * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
- * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
- * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
- * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
- * SUCH DAMAGE.
- * 
- * The licence and distribution terms for any publically available version or
- * derivative of this code cannot be changed.  i.e. this code cannot simply be
- * copied and put under another distribution licence
- * [including the GNU Public Licence.]
- */
-
-#include <stdio.h>
-#include <errno.h>
-#include "cryptlib.h"
-#include <openssl/bio.h>
-
-static int buffer_write(BIO *h, const char *buf,int num);
-static int buffer_read(BIO *h, char *buf, int size);
-static int buffer_puts(BIO *h, const char *str);
-static int buffer_gets(BIO *h, char *str, int size);
-static long buffer_ctrl(BIO *h, int cmd, long arg1, void *arg2);
-static int buffer_new(BIO *h);
-static int buffer_free(BIO *data);
-static long buffer_callback_ctrl(BIO *h, int cmd, bio_info_cb *fp);
-#define DEFAULT_BUFFER_SIZE	4096
-
-static BIO_METHOD methods_buffer=
-	{
-	BIO_TYPE_BUFFER,
-	"buffer",
-	buffer_write,
-	buffer_read,
-	buffer_puts,
-	buffer_gets,
-	buffer_ctrl,
-	buffer_new,
-	buffer_free,
-	buffer_callback_ctrl,
-	};
-
-BIO_METHOD *BIO_f_buffer(void)
-	{
-	return(&methods_buffer);
-	}
-
-static int buffer_new(BIO *bi)
-	{
-	BIO_F_BUFFER_CTX *ctx;
-
-	ctx=(BIO_F_BUFFER_CTX *)OPENSSL_malloc(sizeof(BIO_F_BUFFER_CTX));
-	if (ctx == NULL) return(0);
-	ctx->ibuf=(char *)OPENSSL_malloc(DEFAULT_BUFFER_SIZE);
-	if (ctx->ibuf == NULL) { OPENSSL_free(ctx); return(0); }
-	ctx->obuf=(char *)OPENSSL_malloc(DEFAULT_BUFFER_SIZE);
-	if (ctx->obuf == NULL) { OPENSSL_free(ctx->ibuf); OPENSSL_free(ctx); return(0); }
-	ctx->ibuf_size=DEFAULT_BUFFER_SIZE;
-	ctx->obuf_size=DEFAULT_BUFFER_SIZE;
-	ctx->ibuf_len=0;
-	ctx->ibuf_off=0;
-	ctx->obuf_len=0;
-	ctx->obuf_off=0;
-
-	bi->init=1;
-	bi->ptr=(char *)ctx;
-	bi->flags=0;
-	return(1);
-	}
-
-static int buffer_free(BIO *a)
-	{
-	BIO_F_BUFFER_CTX *b;
-
-	if (a == NULL) return(0);
-	b=(BIO_F_BUFFER_CTX *)a->ptr;
-	if (b->ibuf != NULL) OPENSSL_free(b->ibuf);
-	if (b->obuf != NULL) OPENSSL_free(b->obuf);
-	OPENSSL_free(a->ptr);
-	a->ptr=NULL;
-	a->init=0;
-	a->flags=0;
-	return(1);
-	}
-	
-static int buffer_read(BIO *b, char *out, int outl)
-	{
-	int i,num=0;
-	BIO_F_BUFFER_CTX *ctx;
-
-	if (out == NULL) return(0);
-	ctx=(BIO_F_BUFFER_CTX *)b->ptr;
-
-	if ((ctx == NULL) || (b->next_bio == NULL)) return(0);
-	num=0;
-	BIO_clear_retry_flags(b);
-
-start:
-	i=ctx->ibuf_len;
-	/* If there is stuff left over, grab it */
-	if (i != 0)
-		{
-		if (i > outl) i=outl;
-		memcpy(out,&(ctx->ibuf[ctx->ibuf_off]),i);
-		ctx->ibuf_off+=i;
-		ctx->ibuf_len-=i;
-		num+=i;
-		if (outl == i)  return(num);
-		outl-=i;
-		out+=i;
-		}
-
-	/* We may have done a partial read. try to do more.
-	 * We have nothing in the buffer.
-	 * If we get an error and have read some data, just return it
-	 * and let them retry to get the error again.
-	 * copy direct to parent address space */
-	if (outl > ctx->ibuf_size)
-		{
-		for (;;)
-			{
-			i=BIO_read(b->next_bio,out,outl);
-			if (i <= 0)
-				{
-				BIO_copy_next_retry(b);
-				if (i < 0) return((num > 0)?num:i);
-				if (i == 0) return(num);
-				}
-			num+=i;
-			if (outl == i) return(num);
-			out+=i;
-			outl-=i;
-			}
-		}
-	/* else */
-
-	/* we are going to be doing some buffering */
-	i=BIO_read(b->next_bio,ctx->ibuf,ctx->ibuf_size);
-	if (i <= 0)
-		{
-		BIO_copy_next_retry(b);
-		if (i < 0) return((num > 0)?num:i);
-		if (i == 0) return(num);
-		}
-	ctx->ibuf_off=0;
-	ctx->ibuf_len=i;
-
-	/* Lets re-read using ourselves :-) */
-	goto start;
-	}
-
-static int buffer_write(BIO *b, const char *in, int inl)
-	{
-	int i,num=0;
-	BIO_F_BUFFER_CTX *ctx;
-
-	if ((in == NULL) || (inl <= 0)) return(0);
-	ctx=(BIO_F_BUFFER_CTX *)b->ptr;
-	if ((ctx == NULL) || (b->next_bio == NULL)) return(0);
-
-	BIO_clear_retry_flags(b);
-start:
-	i=ctx->obuf_size-(ctx->obuf_len+ctx->obuf_off);
-	/* add to buffer and return */
-	if (i >= inl)
-		{
-		memcpy(&(ctx->obuf[ctx->obuf_len]),in,inl);
-		ctx->obuf_len+=inl;
-		return(num+inl);
-		}
-	/* else */
-	/* stuff already in buffer, so add to it first, then flush */
-	if (ctx->obuf_len != 0)
-		{
-		if (i > 0) /* lets fill it up if we can */
-			{
-			memcpy(&(ctx->obuf[ctx->obuf_len]),in,i);
-			in+=i;
-			inl-=i;
-			num+=i;
-			ctx->obuf_len+=i;
-			}
-		/* we now have a full buffer needing flushing */
-		for (;;)
-			{
-			i=BIO_write(b->next_bio,&(ctx->obuf[ctx->obuf_off]),
-				ctx->obuf_len);
-			if (i <= 0)
-				{
-				BIO_copy_next_retry(b);
-
-				if (i < 0) return((num > 0)?num:i);
-				if (i == 0) return(num);
-				}
-			ctx->obuf_off+=i;
-			ctx->obuf_len-=i;
-			if (ctx->obuf_len == 0) break;
-			}
-		}
-	/* we only get here if the buffer has been flushed and we
-	 * still have stuff to write */
-	ctx->obuf_off=0;
-
-	/* we now have inl bytes to write */
-	while (inl >= ctx->obuf_size)
-		{
-		i=BIO_write(b->next_bio,in,inl);
-		if (i <= 0)
-			{
-			BIO_copy_next_retry(b);
-			if (i < 0) return((num > 0)?num:i);
-			if (i == 0) return(num);
-			}
-		num+=i;
-		in+=i;
-		inl-=i;
-		if (inl == 0) return(num);
-		}
-
-	/* copy the rest into the buffer since we have only a small 
-	 * amount left */
-	goto start;
-	}
-
-static long buffer_ctrl(BIO *b, int cmd, long num, void *ptr)
-	{
-	BIO *dbio;
-	BIO_F_BUFFER_CTX *ctx;
-	long ret=1;
-	char *p1,*p2;
-	int r,i,*ip;
-	int ibs,obs;
-
-	ctx=(BIO_F_BUFFER_CTX *)b->ptr;
-
-	switch (cmd)
-		{
-	case BIO_CTRL_RESET:
-		ctx->ibuf_off=0;
-		ctx->ibuf_len=0;
-		ctx->obuf_off=0;
-		ctx->obuf_len=0;
-		if (b->next_bio == NULL) return(0);
-		ret=BIO_ctrl(b->next_bio,cmd,num,ptr);
-		break;
-	case BIO_CTRL_INFO:
-		ret=(long)ctx->obuf_len;
-		break;
-	case BIO_C_GET_BUFF_NUM_LINES:
-		ret=0;
-		p1=ctx->ibuf;
-		for (i=ctx->ibuf_off; i<ctx->ibuf_len; i++)
-			{
-			if (p1[i] == '\n') ret++;
-			}
-		break;
-	case BIO_CTRL_WPENDING:
-		ret=(long)ctx->obuf_len;
-		if (ret == 0)
-			{
-			if (b->next_bio == NULL) return(0);
-			ret=BIO_ctrl(b->next_bio,cmd,num,ptr);
-			}
-		break;
-	case BIO_CTRL_PENDING:
-		ret=(long)ctx->ibuf_len;
-		if (ret == 0)
-			{
-			if (b->next_bio == NULL) return(0);
-			ret=BIO_ctrl(b->next_bio,cmd,num,ptr);
-			}
-		break;
-	case BIO_C_SET_BUFF_READ_DATA:
-		if (num > ctx->ibuf_size)
-			{
-			p1=OPENSSL_malloc((int)num);
-			if (p1 == NULL) goto malloc_error;
-			if (ctx->ibuf != NULL) OPENSSL_free(ctx->ibuf);
-			ctx->ibuf=p1;
-			}
-		ctx->ibuf_off=0;
-		ctx->ibuf_len=(int)num;
-		memcpy(ctx->ibuf,ptr,(int)num);
-		ret=1;
-		break;
-	case BIO_C_SET_BUFF_SIZE:
-		if (ptr != NULL)
-			{
-			ip=(int *)ptr;
-			if (*ip == 0)
-				{
-				ibs=(int)num;
-				obs=ctx->obuf_size;
-				}
-			else /* if (*ip == 1) */
-				{
-				ibs=ctx->ibuf_size;
-				obs=(int)num;
-				}
-			}
-		else
-			{
-			ibs=(int)num;
-			obs=(int)num;
-			}
-		p1=ctx->ibuf;
-		p2=ctx->obuf;
-		if ((ibs > DEFAULT_BUFFER_SIZE) && (ibs != ctx->ibuf_size))
-			{
-			p1=(char *)OPENSSL_malloc((int)num);
-			if (p1 == NULL) goto malloc_error;
-			}
-		if ((obs > DEFAULT_BUFFER_SIZE) && (obs != ctx->obuf_size))
-			{
-			p2=(char *)OPENSSL_malloc((int)num);
-			if (p2 == NULL)
-				{
-				if (p1 != ctx->ibuf) OPENSSL_free(p1);
-				goto malloc_error;
-				}
-			}
-		if (ctx->ibuf != p1)
-			{
-			OPENSSL_free(ctx->ibuf);
-			ctx->ibuf=p1;
-			ctx->ibuf_off=0;
-			ctx->ibuf_len=0;
-			ctx->ibuf_size=ibs;
-			}
-		if (ctx->obuf != p2)
-			{
-			OPENSSL_free(ctx->obuf);
-			ctx->obuf=p2;
-			ctx->obuf_off=0;
-			ctx->obuf_len=0;
-			ctx->obuf_size=obs;
-			}
-		break;
-	case BIO_C_DO_STATE_MACHINE:
-		if (b->next_bio == NULL) return(0);
-		BIO_clear_retry_flags(b);
-		ret=BIO_ctrl(b->next_bio,cmd,num,ptr);
-		BIO_copy_next_retry(b);
-		break;
-
-	case BIO_CTRL_FLUSH:
-		if (b->next_bio == NULL) return(0);
-		if (ctx->obuf_len <= 0)
-			{
-			ret=BIO_ctrl(b->next_bio,cmd,num,ptr);
-			break;
-			}
-
-		for (;;)
-			{
-			BIO_clear_retry_flags(b);
-			if (ctx->obuf_len > ctx->obuf_off)
-				{
-				r=BIO_write(b->next_bio,
-					&(ctx->obuf[ctx->obuf_off]),
-					ctx->obuf_len-ctx->obuf_off);
-#if 0
-fprintf(stderr,"FLUSH [%3d] %3d -> %3d\n",ctx->obuf_off,ctx->obuf_len-ctx->obuf_off,r);
-#endif
-				BIO_copy_next_retry(b);
-				if (r <= 0) return((long)r);
-				ctx->obuf_off+=r;
-				}
-			else
-				{
-				ctx->obuf_len=0;
-				ctx->obuf_off=0;
-				ret=1;
-				break;
-				}
-			}
-		ret=BIO_ctrl(b->next_bio,cmd,num,ptr);
-		break;
-	case BIO_CTRL_DUP:
-		dbio=(BIO *)ptr;
-		if (	!BIO_set_read_buffer_size(dbio,ctx->ibuf_size) ||
-			!BIO_set_write_buffer_size(dbio,ctx->obuf_size))
-			ret=0;
-		break;
-	default:
-		if (b->next_bio == NULL) return(0);
-		ret=BIO_ctrl(b->next_bio,cmd,num,ptr);
-		break;
-		}
-	return(ret);
-malloc_error:
-	BIOerr(BIO_F_BUFFER_CTRL,ERR_R_MALLOC_FAILURE);
-	return(0);
-	}
-
-static long buffer_callback_ctrl(BIO *b, int cmd, bio_info_cb *fp)
-	{
-	long ret=1;
-
-	if (b->next_bio == NULL) return(0);
-	switch (cmd)
-		{
-	default:
-		ret=BIO_callback_ctrl(b->next_bio,cmd,fp);
-		break;
-		}
-	return(ret);
-	}
-
-static int buffer_gets(BIO *b, char *buf, int size)
-	{
-	BIO_F_BUFFER_CTX *ctx;
-	int num=0,i,flag;
-	char *p;
-
-	ctx=(BIO_F_BUFFER_CTX *)b->ptr;
-	size--; /* reserve space for a '\0' */
-	BIO_clear_retry_flags(b);
-
-	for (;;)
-		{
-		if (ctx->ibuf_len > 0)
-			{
-			p= &(ctx->ibuf[ctx->ibuf_off]);
-			flag=0;
-			for (i=0; (i<ctx->ibuf_len) && (i<size); i++)
-				{
-				*(buf++)=p[i];
-				if (p[i] == '\n')
-					{
-					flag=1;
-					i++;
-					break;
-					}
-				}
-			num+=i;
-			size-=i;
-			ctx->ibuf_len-=i;
-			ctx->ibuf_off+=i;
-			if (flag || size == 0)
-				{
-				*buf='\0';
-				return(num);
-				}
-			}
-		else	/* read another chunk */
-			{
-			i=BIO_read(b->next_bio,ctx->ibuf,ctx->ibuf_size);
-			if (i <= 0)
-				{
-				BIO_copy_next_retry(b);
-				*buf='\0';
-				if (i < 0) return((num > 0)?num:i);
-				if (i == 0) return(num);
-				}
-			ctx->ibuf_len=i;
-			ctx->ibuf_off=0;
-			}
-		}
-	}
-
-static int buffer_puts(BIO *b, const char *str)
-	{
-	return(buffer_write(b,str,strlen(str)));
-	}
-
diff --git a/crypto/openssl/crypto/bio/bf_lbuf.c b/crypto/openssl/crypto/bio/bf_lbuf.c
deleted file mode 100644
index ec0f7eb0b7ee..000000000000
--- a/crypto/openssl/crypto/bio/bf_lbuf.c
+++ /dev/null
@@ -1,397 +0,0 @@
-/* crypto/bio/bf_buff.c */
-/* Copyright (C) 1995-1998 Eric Young (eay@cryptsoft.com)
- * All rights reserved.
- *
- * This package is an SSL implementation written
- * by Eric Young (eay@cryptsoft.com).
- * The implementation was written so as to conform with Netscapes SSL.
- * 
- * This library is free for commercial and non-commercial use as long as
- * the following conditions are aheared to.  The following conditions
- * apply to all code found in this distribution, be it the RC4, RSA,
- * lhash, DES, etc., code; not just the SSL code.  The SSL documentation
- * included with this distribution is covered by the same copyright terms
- * except that the holder is Tim Hudson (tjh@cryptsoft.com).
- * 
- * Copyright remains Eric Young's, and as such any Copyright notices in
- * the code are not to be removed.
- * If this package is used in a product, Eric Young should be given attribution
- * as the author of the parts of the library used.
- * This can be in the form of a textual message at program startup or
- * in documentation (online or textual) provided with the package.
- * 
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions
- * are met:
- * 1. Redistributions of source code must retain the copyright
- *    notice, this list of conditions and the following disclaimer.
- * 2. Redistributions in binary form must reproduce the above copyright
- *    notice, this list of conditions and the following disclaimer in the
- *    documentation and/or other materials provided with the distribution.
- * 3. All advertising materials mentioning features or use of this software
- *    must display the following acknowledgement:
- *    "This product includes cryptographic software written by
- *     Eric Young (eay@cryptsoft.com)"
- *    The word 'cryptographic' can be left out if the rouines from the library
- *    being used are not cryptographic related :-).
- * 4. If you include any Windows specific code (or a derivative thereof) from 
- *    the apps directory (application code) you must include an acknowledgement:
- *    "This product includes software written by Tim Hudson (tjh@cryptsoft.com)"
- * 
- * THIS SOFTWARE IS PROVIDED BY ERIC YOUNG ``AS IS'' AND
- * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
- * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
- * ARE DISCLAIMED.  IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE
- * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
- * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
- * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
- * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
- * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
- * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
- * SUCH DAMAGE.
- * 
- * The licence and distribution terms for any publically available version or
- * derivative of this code cannot be changed.  i.e. this code cannot simply be
- * copied and put under another distribution licence
- * [including the GNU Public Licence.]
- */
-
-#include <stdio.h>
-#include <errno.h>
-#include "cryptlib.h"
-#include <openssl/bio.h>
-#include <openssl/evp.h>
-
-static int linebuffer_write(BIO *h, const char *buf,int num);
-static int linebuffer_read(BIO *h, char *buf, int size);
-static int linebuffer_puts(BIO *h, const char *str);
-static int linebuffer_gets(BIO *h, char *str, int size);
-static long linebuffer_ctrl(BIO *h, int cmd, long arg1, void *arg2);
-static int linebuffer_new(BIO *h);
-static int linebuffer_free(BIO *data);
-static long linebuffer_callback_ctrl(BIO *h, int cmd, bio_info_cb *fp);
-
-/* A 10k maximum should be enough for most purposes */
-#define DEFAULT_LINEBUFFER_SIZE	1024*10
-
-/* #define DEBUG */
-
-static BIO_METHOD methods_linebuffer=
-	{
-	BIO_TYPE_LINEBUFFER,
-	"linebuffer",
-	linebuffer_write,
-	linebuffer_read,
-	linebuffer_puts,
-	linebuffer_gets,
-	linebuffer_ctrl,
-	linebuffer_new,
-	linebuffer_free,
-	linebuffer_callback_ctrl,
-	};
-
-BIO_METHOD *BIO_f_linebuffer(void)
-	{
-	return(&methods_linebuffer);
-	}
-
-typedef struct bio_linebuffer_ctx_struct
-	{
-	char *obuf;		/* the output char array */
-	int obuf_size;		/* how big is the output buffer */
-	int obuf_len;		/* how many bytes are in it */
-	} BIO_LINEBUFFER_CTX;
-
-static int linebuffer_new(BIO *bi)
-	{
-	BIO_LINEBUFFER_CTX *ctx;
-
-	ctx=(BIO_LINEBUFFER_CTX *)OPENSSL_malloc(sizeof(BIO_LINEBUFFER_CTX));
-	if (ctx == NULL) return(0);
-	ctx->obuf=(char *)OPENSSL_malloc(DEFAULT_LINEBUFFER_SIZE);
-	if (ctx->obuf == NULL) { OPENSSL_free(ctx); return(0); }
-	ctx->obuf_size=DEFAULT_LINEBUFFER_SIZE;
-	ctx->obuf_len=0;
-
-	bi->init=1;
-	bi->ptr=(char *)ctx;
-	bi->flags=0;
-	return(1);
-	}
-
-static int linebuffer_free(BIO *a)
-	{
-	BIO_LINEBUFFER_CTX *b;
-
-	if (a == NULL) return(0);
-	b=(BIO_LINEBUFFER_CTX *)a->ptr;
-	if (b->obuf != NULL) OPENSSL_free(b->obuf);
-	OPENSSL_free(a->ptr);
-	a->ptr=NULL;
-	a->init=0;
-	a->flags=0;
-	return(1);
-	}
-	
-static int linebuffer_read(BIO *b, char *out, int outl)
-	{
-	int ret=0;
- 
-	if (out == NULL) return(0);
-	if (b->next_bio == NULL) return(0);
-	ret=BIO_read(b->next_bio,out,outl);
-	BIO_clear_retry_flags(b);
-	BIO_copy_next_retry(b);
-	return(ret);
-	}
-
-static int linebuffer_write(BIO *b, const char *in, int inl)
-	{
-	int i,num=0,foundnl;
-	BIO_LINEBUFFER_CTX *ctx;
-
-	if ((in == NULL) || (inl <= 0)) return(0);
-	ctx=(BIO_LINEBUFFER_CTX *)b->ptr;
-	if ((ctx == NULL) || (b->next_bio == NULL)) return(0);
-
-	BIO_clear_retry_flags(b);
-
-	do
-		{
-		const char *p;
-
-		for(p = in; p < in + inl && *p != '\n'; p++)
-			;
-		if (*p == '\n')
-			{
-			p++;
-			foundnl = 1;
-			}
-		else
-			foundnl = 0;
-
-		/* If a NL was found and we already have text in the save
-		   buffer, concatenate them and write */
-		while ((foundnl || p - in > ctx->obuf_size - ctx->obuf_len)
-			&& ctx->obuf_len > 0)
-			{
-			int orig_olen = ctx->obuf_len;
-			
-			i = ctx->obuf_size - ctx->obuf_len;
-			if (p - in > 0)
-				{
-				if (i >= p - in)
-					{
-					memcpy(&(ctx->obuf[ctx->obuf_len]),
-						in,p - in);
-					ctx->obuf_len += p - in;
-					inl -= p - in;
-					num += p - in;
-					in = p;
-					}
-				else
-					{
-					memcpy(&(ctx->obuf[ctx->obuf_len]),
-						in,i);
-					ctx->obuf_len += i;
-					inl -= i;
-					in += i;
-					num += i;
-					}
-				}
-
-#if 0
-BIO_write(b->next_bio, "<*<", 3);
-#endif
-			i=BIO_write(b->next_bio,
-				ctx->obuf, ctx->obuf_len);
-			if (i <= 0)
-				{
-				ctx->obuf_len = orig_olen;
-				BIO_copy_next_retry(b);
-
-#if 0
-BIO_write(b->next_bio, ">*>", 3);
-#endif
-				if (i < 0) return((num > 0)?num:i);
-				if (i == 0) return(num);
-				}
-#if 0
-BIO_write(b->next_bio, ">*>", 3);
-#endif
-			if (i < ctx->obuf_len)
-				memmove(ctx->obuf, ctx->obuf + i,
-					ctx->obuf_len - i);
-			ctx->obuf_len-=i;
-			}
-
-		/* Now that the save buffer is emptied, let's write the input
-		   buffer if a NL was found and there is anything to write. */
-		if ((foundnl || p - in > ctx->obuf_size) && p - in > 0)
-			{
-#if 0
-BIO_write(b->next_bio, "<*<", 3);
-#endif
-			i=BIO_write(b->next_bio,in,p - in);
-			if (i <= 0)
-				{
-				BIO_copy_next_retry(b);
-#if 0
-BIO_write(b->next_bio, ">*>", 3);
-#endif
-				if (i < 0) return((num > 0)?num:i);
-				if (i == 0) return(num);
-				}
-#if 0
-BIO_write(b->next_bio, ">*>", 3);
-#endif
-			num+=i;
-			in+=i;
-			inl-=i;
-			}
-		}
-	while(foundnl && inl > 0);
-	/* We've written as much as we can.  The rest of the input buffer, if
-	   any, is text that doesn't and with a NL and therefore needs to be
-	   saved for the next trip. */
-	if (inl > 0)
-		{
-		memcpy(&(ctx->obuf[ctx->obuf_len]), in, inl);
-		ctx->obuf_len += inl;
-		num += inl;
-		}
-	return num;
-	}
-
-static long linebuffer_ctrl(BIO *b, int cmd, long num, void *ptr)
-	{
-	BIO *dbio;
-	BIO_LINEBUFFER_CTX *ctx;
-	long ret=1;
-	char *p;
-	int r;
-	int obs;
-
-	ctx=(BIO_LINEBUFFER_CTX *)b->ptr;
-
-	switch (cmd)
-		{
-	case BIO_CTRL_RESET:
-		ctx->obuf_len=0;
-		if (b->next_bio == NULL) return(0);
-		ret=BIO_ctrl(b->next_bio,cmd,num,ptr);
-		break;
-	case BIO_CTRL_INFO:
-		ret=(long)ctx->obuf_len;
-		break;
-	case BIO_CTRL_WPENDING:
-		ret=(long)ctx->obuf_len;
-		if (ret == 0)
-			{
-			if (b->next_bio == NULL) return(0);
-			ret=BIO_ctrl(b->next_bio,cmd,num,ptr);
-			}
-		break;
-	case BIO_C_SET_BUFF_SIZE:
-		obs=(int)num;
-		p=ctx->obuf;
-		if ((obs > DEFAULT_LINEBUFFER_SIZE) && (obs != ctx->obuf_size))
-			{
-			p=(char *)OPENSSL_malloc((int)num);
-			if (p == NULL)
-				goto malloc_error;
-			}
-		if (ctx->obuf != p)
-			{
-			if (ctx->obuf_len > obs)
-				{
-				ctx->obuf_len = obs;
-				}
-			memcpy(p, ctx->obuf, ctx->obuf_len);
-			OPENSSL_free(ctx->obuf);
-			ctx->obuf=p;
-			ctx->obuf_size=obs;
-			}
-		break;
-	case BIO_C_DO_STATE_MACHINE:
-		if (b->next_bio == NULL) return(0);
-		BIO_clear_retry_flags(b);
-		ret=BIO_ctrl(b->next_bio,cmd,num,ptr);
-		BIO_copy_next_retry(b);
-		break;
-
-	case BIO_CTRL_FLUSH:
-		if (b->next_bio == NULL) return(0);
-		if (ctx->obuf_len <= 0)
-			{
-			ret=BIO_ctrl(b->next_bio,cmd,num,ptr);
-			break;
-			}
-
-		for (;;)
-			{
-			BIO_clear_retry_flags(b);
-			if (ctx->obuf_len > 0)
-				{
-				r=BIO_write(b->next_bio,
-					ctx->obuf, ctx->obuf_len);
-#if 0
-fprintf(stderr,"FLUSH %3d -> %3d\n",ctx->obuf_len,r);
-#endif
-				BIO_copy_next_retry(b);
-				if (r <= 0) return((long)r);
-				if (r < ctx->obuf_len)
-					memmove(ctx->obuf, ctx->obuf + r,
-						ctx->obuf_len - r);
-				ctx->obuf_len-=r;
-				}
-			else
-				{
-				ctx->obuf_len=0;
-				ret=1;
-				break;
-				}
-			}
-		ret=BIO_ctrl(b->next_bio,cmd,num,ptr);
-		break;
-	case BIO_CTRL_DUP:
-		dbio=(BIO *)ptr;
-		if (	!BIO_set_write_buffer_size(dbio,ctx->obuf_size))
-			ret=0;
-		break;
-	default:
-		if (b->next_bio == NULL) return(0);
-		ret=BIO_ctrl(b->next_bio,cmd,num,ptr);
-		break;
-		}
-	return(ret);
-malloc_error:
-	BIOerr(BIO_F_LINEBUFFER_CTRL,ERR_R_MALLOC_FAILURE);
-	return(0);
-	}
-
-static long linebuffer_callback_ctrl(BIO *b, int cmd, bio_info_cb *fp)
-	{
-	long ret=1;
-
-	if (b->next_bio == NULL) return(0);
-	switch (cmd)
-		{
-	default:
-		ret=BIO_callback_ctrl(b->next_bio,cmd,fp);
-		break;
-		}
-	return(ret);
-	}
-
-static int linebuffer_gets(BIO *b, char *buf, int size)
-	{
-	if (b->next_bio == NULL) return(0);
-	return(BIO_gets(b->next_bio,buf,size));
-	}
-
-static int linebuffer_puts(BIO *b, const char *str)
-	{
-	return(linebuffer_write(b,str,strlen(str)));
-	}
-
diff --git a/crypto/openssl/crypto/bio/bf_nbio.c b/crypto/openssl/crypto/bio/bf_nbio.c
deleted file mode 100644
index c72a23c2e1b2..000000000000
--- a/crypto/openssl/crypto/bio/bf_nbio.c
+++ /dev/null
@@ -1,255 +0,0 @@
-/* crypto/bio/bf_nbio.c */
-/* Copyright (C) 1995-1998 Eric Young (eay@cryptsoft.com)
- * All rights reserved.
- *
- * This package is an SSL implementation written
- * by Eric Young (eay@cryptsoft.com).
- * The implementation was written so as to conform with Netscapes SSL.
- * 
- * This library is free for commercial and non-commercial use as long as
- * the following conditions are aheared to.  The following conditions
- * apply to all code found in this distribution, be it the RC4, RSA,
- * lhash, DES, etc., code; not just the SSL code.  The SSL documentation
- * included with this distribution is covered by the same copyright terms
- * except that the holder is Tim Hudson (tjh@cryptsoft.com).
- * 
- * Copyright remains Eric Young's, and as such any Copyright notices in
- * the code are not to be removed.
- * If this package is used in a product, Eric Young should be given attribution
- * as the author of the parts of the library used.
- * This can be in the form of a textual message at program startup or
- * in documentation (online or textual) provided with the package.
- * 
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions
- * are met:
- * 1. Redistributions of source code must retain the copyright
- *    notice, this list of conditions and the following disclaimer.
- * 2. Redistributions in binary form must reproduce the above copyright
- *    notice, this list of conditions and the following disclaimer in the
- *    documentation and/or other materials provided with the distribution.
- * 3. All advertising materials mentioning features or use of this software
- *    must display the following acknowledgement:
- *    "This product includes cryptographic software written by
- *     Eric Young (eay@cryptsoft.com)"
- *    The word 'cryptographic' can be left out if the rouines from the library
- *    being used are not cryptographic related :-).
- * 4. If you include any Windows specific code (or a derivative thereof) from 
- *    the apps directory (application code) you must include an acknowledgement:
- *    "This product includes software written by Tim Hudson (tjh@cryptsoft.com)"
- * 
- * THIS SOFTWARE IS PROVIDED BY ERIC YOUNG ``AS IS'' AND
- * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
- * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
- * ARE DISCLAIMED.  IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE
- * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
- * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
- * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
- * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
- * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
- * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
- * SUCH DAMAGE.
- * 
- * The licence and distribution terms for any publically available version or
- * derivative of this code cannot be changed.  i.e. this code cannot simply be
- * copied and put under another distribution licence
- * [including the GNU Public Licence.]
- */
-
-#include <stdio.h>
-#include <errno.h>
-#include "cryptlib.h"
-#include <openssl/rand.h>
-#include <openssl/bio.h>
-
-/* BIO_put and BIO_get both add to the digest,
- * BIO_gets returns the digest */
-
-static int nbiof_write(BIO *h,const char *buf,int num);
-static int nbiof_read(BIO *h,char *buf,int size);
-static int nbiof_puts(BIO *h,const char *str);
-static int nbiof_gets(BIO *h,char *str,int size);
-static long nbiof_ctrl(BIO *h,int cmd,long arg1,void *arg2);
-static int nbiof_new(BIO *h);
-static int nbiof_free(BIO *data);
-static long nbiof_callback_ctrl(BIO *h,int cmd,bio_info_cb *fp);
-typedef struct nbio_test_st
-	{
-	/* only set if we sent a 'should retry' error */
-	int lrn;
-	int lwn;
-	} NBIO_TEST;
-
-static BIO_METHOD methods_nbiof=
-	{
-	BIO_TYPE_NBIO_TEST,
-	"non-blocking IO test filter",
-	nbiof_write,
-	nbiof_read,
-	nbiof_puts,
-	nbiof_gets,
-	nbiof_ctrl,
-	nbiof_new,
-	nbiof_free,
-	nbiof_callback_ctrl,
-	};
-
-BIO_METHOD *BIO_f_nbio_test(void)
-	{
-	return(&methods_nbiof);
-	}
-
-static int nbiof_new(BIO *bi)
-	{
-	NBIO_TEST *nt;
-
-	if (!(nt=(NBIO_TEST *)OPENSSL_malloc(sizeof(NBIO_TEST)))) return(0);
-	nt->lrn= -1;
-	nt->lwn= -1;
-	bi->ptr=(char *)nt;
-	bi->init=1;
-	bi->flags=0;
-	return(1);
-	}
-
-static int nbiof_free(BIO *a)
-	{
-	if (a == NULL) return(0);
-	if (a->ptr != NULL)
-		OPENSSL_free(a->ptr);
-	a->ptr=NULL;
-	a->init=0;
-	a->flags=0;
-	return(1);
-	}
-	
-static int nbiof_read(BIO *b, char *out, int outl)
-	{
-	NBIO_TEST *nt;
-	int ret=0;
-#if 1
-	int num;
-	unsigned char n;
-#endif
-
-	if (out == NULL) return(0);
-	if (b->next_bio == NULL) return(0);
-	nt=(NBIO_TEST *)b->ptr;
-
-	BIO_clear_retry_flags(b);
-#if 1
-	RAND_pseudo_bytes(&n,1);
-	num=(n&0x07);
-
-	if (outl > num) outl=num;
-
-	if (num == 0)
-		{
-		ret= -1;
-		BIO_set_retry_read(b);
-		}
-	else
-#endif
-		{
-		ret=BIO_read(b->next_bio,out,outl);
-		if (ret < 0)
-			BIO_copy_next_retry(b);
-		}
-	return(ret);
-	}
-
-static int nbiof_write(BIO *b, const char *in, int inl)
-	{
-	NBIO_TEST *nt;
-	int ret=0;
-	int num;
-	unsigned char n;
-
-	if ((in == NULL) || (inl <= 0)) return(0);
-	if (b->next_bio == NULL) return(0);
-	nt=(NBIO_TEST *)b->ptr;
-
-	BIO_clear_retry_flags(b);
-
-#if 1
-	if (nt->lwn > 0)
-		{
-		num=nt->lwn;
-		nt->lwn=0;
-		}
-	else
-		{
-		RAND_pseudo_bytes(&n,1);
-		num=(n&7);
-		}
-
-	if (inl > num) inl=num;
-
-	if (num == 0)
-		{
-		ret= -1;
-		BIO_set_retry_write(b);
-		}
-	else
-#endif
-		{
-		ret=BIO_write(b->next_bio,in,inl);
-		if (ret < 0)
-			{
-			BIO_copy_next_retry(b);
-			nt->lwn=inl;
-			}
-		}
-	return(ret);
-	}
-
-static long nbiof_ctrl(BIO *b, int cmd, long num, void *ptr)
-	{
-	long ret;
-
-	if (b->next_bio == NULL) return(0);
-	switch (cmd)
-		{
-        case BIO_C_DO_STATE_MACHINE:
-		BIO_clear_retry_flags(b);
-		ret=BIO_ctrl(b->next_bio,cmd,num,ptr);
-		BIO_copy_next_retry(b);
-		break;
-	case BIO_CTRL_DUP:
-		ret=0L;
-		break;
-	default:
-		ret=BIO_ctrl(b->next_bio,cmd,num,ptr);
-		break;
-		}
-	return(ret);
-	}
-
-static long nbiof_callback_ctrl(BIO *b, int cmd, bio_info_cb *fp)
-	{
-	long ret=1;
-
-	if (b->next_bio == NULL) return(0);
-	switch (cmd)
-		{
-	default:
-		ret=BIO_callback_ctrl(b->next_bio,cmd,fp);
-		break;
-		}
-	return(ret);
-	}
-
-static int nbiof_gets(BIO *bp, char *buf, int size)
-	{
-	if (bp->next_bio == NULL) return(0);
-	return(BIO_gets(bp->next_bio,buf,size));
-	}
-
-
-static int nbiof_puts(BIO *bp, const char *str)
-	{
-	if (bp->next_bio == NULL) return(0);
-	return(BIO_puts(bp->next_bio,str));
-	}
-
-
diff --git a/crypto/openssl/crypto/bio/bf_null.c b/crypto/openssl/crypto/bio/bf_null.c
deleted file mode 100644
index c1bf39a904f4..000000000000
--- a/crypto/openssl/crypto/bio/bf_null.c
+++ /dev/null
@@ -1,183 +0,0 @@
-/* crypto/bio/bf_null.c */
-/* Copyright (C) 1995-1998 Eric Young (eay@cryptsoft.com)
- * All rights reserved.
- *
- * This package is an SSL implementation written
- * by Eric Young (eay@cryptsoft.com).
- * The implementation was written so as to conform with Netscapes SSL.
- * 
- * This library is free for commercial and non-commercial use as long as
- * the following conditions are aheared to.  The following conditions
- * apply to all code found in this distribution, be it the RC4, RSA,
- * lhash, DES, etc., code; not just the SSL code.  The SSL documentation
- * included with this distribution is covered by the same copyright terms
- * except that the holder is Tim Hudson (tjh@cryptsoft.com).
- * 
- * Copyright remains Eric Young's, and as such any Copyright notices in
- * the code are not to be removed.
- * If this package is used in a product, Eric Young should be given attribution
- * as the author of the parts of the library used.
- * This can be in the form of a textual message at program startup or
- * in documentation (online or textual) provided with the package.
- * 
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions
- * are met:
- * 1. Redistributions of source code must retain the copyright
- *    notice, this list of conditions and the following disclaimer.
- * 2. Redistributions in binary form must reproduce the above copyright
- *    notice, this list of conditions and the following disclaimer in the
- *    documentation and/or other materials provided with the distribution.
- * 3. All advertising materials mentioning features or use of this software
- *    must display the following acknowledgement:
- *    "This product includes cryptographic software written by
- *     Eric Young (eay@cryptsoft.com)"
- *    The word 'cryptographic' can be left out if the rouines from the library
- *    being used are not cryptographic related :-).
- * 4. If you include any Windows specific code (or a derivative thereof) from 
- *    the apps directory (application code) you must include an acknowledgement:
- *    "This product includes software written by Tim Hudson (tjh@cryptsoft.com)"
- * 
- * THIS SOFTWARE IS PROVIDED BY ERIC YOUNG ``AS IS'' AND
- * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
- * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
- * ARE DISCLAIMED.  IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE
- * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
- * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
- * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
- * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
- * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
- * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
- * SUCH DAMAGE.
- * 
- * The licence and distribution terms for any publically available version or
- * derivative of this code cannot be changed.  i.e. this code cannot simply be
- * copied and put under another distribution licence
- * [including the GNU Public Licence.]
- */
-
-#include <stdio.h>
-#include <errno.h>
-#include "cryptlib.h"
-#include <openssl/bio.h>
-
-/* BIO_put and BIO_get both add to the digest,
- * BIO_gets returns the digest */
-
-static int nullf_write(BIO *h, const char *buf, int num);
-static int nullf_read(BIO *h, char *buf, int size);
-static int nullf_puts(BIO *h, const char *str);
-static int nullf_gets(BIO *h, char *str, int size);
-static long nullf_ctrl(BIO *h, int cmd, long arg1, void *arg2);
-static int nullf_new(BIO *h);
-static int nullf_free(BIO *data);
-static long nullf_callback_ctrl(BIO *h, int cmd, bio_info_cb *fp);
-static BIO_METHOD methods_nullf=
-	{
-	BIO_TYPE_NULL_FILTER,
-	"NULL filter",
-	nullf_write,
-	nullf_read,
-	nullf_puts,
-	nullf_gets,
-	nullf_ctrl,
-	nullf_new,
-	nullf_free,
-	nullf_callback_ctrl,
-	};
-
-BIO_METHOD *BIO_f_null(void)
-	{
-	return(&methods_nullf);
-	}
-
-static int nullf_new(BIO *bi)
-	{
-	bi->init=1;
-	bi->ptr=NULL;
-	bi->flags=0;
-	return(1);
-	}
-
-static int nullf_free(BIO *a)
-	{
-	if (a == NULL) return(0);
-/*	a->ptr=NULL;
-	a->init=0;
-	a->flags=0;*/
-	return(1);
-	}
-	
-static int nullf_read(BIO *b, char *out, int outl)
-	{
-	int ret=0;
- 
-	if (out == NULL) return(0);
-	if (b->next_bio == NULL) return(0);
-	ret=BIO_read(b->next_bio,out,outl);
-	BIO_clear_retry_flags(b);
-	BIO_copy_next_retry(b);
-	return(ret);
-	}
-
-static int nullf_write(BIO *b, const char *in, int inl)
-	{
-	int ret=0;
-
-	if ((in == NULL) || (inl <= 0)) return(0);
-	if (b->next_bio == NULL) return(0);
-	ret=BIO_write(b->next_bio,in,inl);
-	BIO_clear_retry_flags(b);
-	BIO_copy_next_retry(b);
-	return(ret);
-	}
-
-static long nullf_ctrl(BIO *b, int cmd, long num, void *ptr)
-	{
-	long ret;
-
-	if (b->next_bio == NULL) return(0);
-	switch(cmd)
-		{
-        case BIO_C_DO_STATE_MACHINE:
-		BIO_clear_retry_flags(b);
-		ret=BIO_ctrl(b->next_bio,cmd,num,ptr);
-		BIO_copy_next_retry(b);
-		break;
-	case BIO_CTRL_DUP:
-		ret=0L;
-		break;
-	default:
-		ret=BIO_ctrl(b->next_bio,cmd,num,ptr);
-		}
-	return(ret);
-	}
-
-static long nullf_callback_ctrl(BIO *b, int cmd, bio_info_cb *fp)
-	{
-	long ret=1;
-
-	if (b->next_bio == NULL) return(0);
-	switch (cmd)
-		{
-	default:
-		ret=BIO_callback_ctrl(b->next_bio,cmd,fp);
-		break;
-		}
-	return(ret);
-	}
-
-static int nullf_gets(BIO *bp, char *buf, int size)
-	{
-	if (bp->next_bio == NULL) return(0);
-	return(BIO_gets(bp->next_bio,buf,size));
-	}
-
-
-static int nullf_puts(BIO *bp, const char *str)
-	{
-	if (bp->next_bio == NULL) return(0);
-	return(BIO_puts(bp->next_bio,str));
-	}
-
-
diff --git a/crypto/openssl/crypto/bio/bio.h b/crypto/openssl/crypto/bio/bio.h
deleted file mode 100644
index 2c9e8a7c804a..000000000000
--- a/crypto/openssl/crypto/bio/bio.h
+++ /dev/null
@@ -1,775 +0,0 @@
-/* crypto/bio/bio.h */
-/* Copyright (C) 1995-1998 Eric Young (eay@cryptsoft.com)
- * All rights reserved.
- *
- * This package is an SSL implementation written
- * by Eric Young (eay@cryptsoft.com).
- * The implementation was written so as to conform with Netscapes SSL.
- * 
- * This library is free for commercial and non-commercial use as long as
- * the following conditions are aheared to.  The following conditions
- * apply to all code found in this distribution, be it the RC4, RSA,
- * lhash, DES, etc., code; not just the SSL code.  The SSL documentation
- * included with this distribution is covered by the same copyright terms
- * except that the holder is Tim Hudson (tjh@cryptsoft.com).
- * 
- * Copyright remains Eric Young's, and as such any Copyright notices in
- * the code are not to be removed.
- * If this package is used in a product, Eric Young should be given attribution
- * as the author of the parts of the library used.
- * This can be in the form of a textual message at program startup or
- * in documentation (online or textual) provided with the package.
- * 
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions
- * are met:
- * 1. Redistributions of source code must retain the copyright
- *    notice, this list of conditions and the following disclaimer.
- * 2. Redistributions in binary form must reproduce the above copyright
- *    notice, this list of conditions and the following disclaimer in the
- *    documentation and/or other materials provided with the distribution.
- * 3. All advertising materials mentioning features or use of this software
- *    must display the following acknowledgement:
- *    "This product includes cryptographic software written by
- *     Eric Young (eay@cryptsoft.com)"
- *    The word 'cryptographic' can be left out if the rouines from the library
- *    being used are not cryptographic related :-).
- * 4. If you include any Windows specific code (or a derivative thereof) from 
- *    the apps directory (application code) you must include an acknowledgement:
- *    "This product includes software written by Tim Hudson (tjh@cryptsoft.com)"
- * 
- * THIS SOFTWARE IS PROVIDED BY ERIC YOUNG ``AS IS'' AND
- * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
- * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
- * ARE DISCLAIMED.  IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE
- * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
- * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
- * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
- * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
- * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
- * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
- * SUCH DAMAGE.
- * 
- * The licence and distribution terms for any publically available version or
- * derivative of this code cannot be changed.  i.e. this code cannot simply be
- * copied and put under another distribution licence
- * [including the GNU Public Licence.]
- */
-
-#ifndef HEADER_BIO_H
-#define HEADER_BIO_H
-
-#include <openssl/e_os2.h>
-
-#ifndef OPENSSL_NO_FP_API
-# include <stdio.h>
-#endif
-#include <stdarg.h>
-
-#include <openssl/crypto.h>
-
-#ifdef  __cplusplus
-extern "C" {
-#endif
-
-/* These are the 'types' of BIOs */
-#define BIO_TYPE_NONE		0
-#define BIO_TYPE_MEM		(1|0x0400)
-#define BIO_TYPE_FILE		(2|0x0400)
-
-#define BIO_TYPE_FD		(4|0x0400|0x0100)
-#define BIO_TYPE_SOCKET		(5|0x0400|0x0100)
-#define BIO_TYPE_NULL		(6|0x0400)
-#define BIO_TYPE_SSL		(7|0x0200)
-#define BIO_TYPE_MD		(8|0x0200)		/* passive filter */
-#define BIO_TYPE_BUFFER		(9|0x0200)		/* filter */
-#define BIO_TYPE_CIPHER		(10|0x0200)		/* filter */
-#define BIO_TYPE_BASE64		(11|0x0200)		/* filter */
-#define BIO_TYPE_CONNECT	(12|0x0400|0x0100)	/* socket - connect */
-#define BIO_TYPE_ACCEPT		(13|0x0400|0x0100)	/* socket for accept */
-#define BIO_TYPE_PROXY_CLIENT	(14|0x0200)		/* client proxy BIO */
-#define BIO_TYPE_PROXY_SERVER	(15|0x0200)		/* server proxy BIO */
-#define BIO_TYPE_NBIO_TEST	(16|0x0200)		/* server proxy BIO */
-#define BIO_TYPE_NULL_FILTER	(17|0x0200)
-#define BIO_TYPE_BER		(18|0x0200)		/* BER -> bin filter */
-#define BIO_TYPE_BIO		(19|0x0400)		/* (half a) BIO pair */
-#define BIO_TYPE_LINEBUFFER	(20|0x0200)		/* filter */
-#define BIO_TYPE_DGRAM		(21|0x0400|0x0100)
-
-#define BIO_TYPE_DESCRIPTOR	0x0100	/* socket, fd, connect or accept */
-#define BIO_TYPE_FILTER		0x0200
-#define BIO_TYPE_SOURCE_SINK	0x0400
-
-/* BIO_FILENAME_READ|BIO_CLOSE to open or close on free.
- * BIO_set_fp(in,stdin,BIO_NOCLOSE); */
-#define BIO_NOCLOSE		0x00
-#define BIO_CLOSE		0x01
-
-/* These are used in the following macros and are passed to
- * BIO_ctrl() */
-#define BIO_CTRL_RESET		1  /* opt - rewind/zero etc */
-#define BIO_CTRL_EOF		2  /* opt - are we at the eof */
-#define BIO_CTRL_INFO		3  /* opt - extra tit-bits */
-#define BIO_CTRL_SET		4  /* man - set the 'IO' type */
-#define BIO_CTRL_GET		5  /* man - get the 'IO' type */
-#define BIO_CTRL_PUSH		6  /* opt - internal, used to signify change */
-#define BIO_CTRL_POP		7  /* opt - internal, used to signify change */
-#define BIO_CTRL_GET_CLOSE	8  /* man - set the 'close' on free */
-#define BIO_CTRL_SET_CLOSE	9  /* man - set the 'close' on free */
-#define BIO_CTRL_PENDING	10  /* opt - is their more data buffered */
-#define BIO_CTRL_FLUSH		11  /* opt - 'flush' buffered output */
-#define BIO_CTRL_DUP		12  /* man - extra stuff for 'duped' BIO */
-#define BIO_CTRL_WPENDING	13  /* opt - number of bytes still to write */
-/* callback is int cb(BIO *bio,state,ret); */
-#define BIO_CTRL_SET_CALLBACK	14  /* opt - set callback function */
-#define BIO_CTRL_GET_CALLBACK	15  /* opt - set callback function */
-
-#define BIO_CTRL_SET_FILENAME	30	/* BIO_s_file special */
-
-/* dgram BIO stuff */
-#define BIO_CTRL_DGRAM_CONNECT       31  /* BIO dgram special */
-#define BIO_CTRL_DGRAM_SET_CONNECTED 32  /* allow for an externally
-										  * connected socket to be
-										  * passed in */ 
-#define BIO_CTRL_DGRAM_SET_RECV_TIMEOUT 33 /* setsockopt, essentially */
-#define BIO_CTRL_DGRAM_GET_RECV_TIMEOUT 34 /* getsockopt, essentially */
-#define BIO_CTRL_DGRAM_SET_SEND_TIMEOUT 35 /* setsockopt, essentially */
-#define BIO_CTRL_DGRAM_GET_SEND_TIMEOUT 36 /* getsockopt, essentially */
-
-#define BIO_CTRL_DGRAM_GET_RECV_TIMER_EXP 37 /* flag whether the last */
-#define BIO_CTRL_DGRAM_GET_SEND_TIMER_EXP 38 /* I/O operation tiemd out */
-					
-/* #ifdef IP_MTU_DISCOVER */
-#define BIO_CTRL_DGRAM_MTU_DISCOVER       39 /* set DF bit on egress packets */
-/* #endif */
-
-#define BIO_CTRL_DGRAM_QUERY_MTU          40 /* as kernel for current MTU */
-#define BIO_CTRL_DGRAM_GET_MTU            41 /* get cached value for MTU */
-#define BIO_CTRL_DGRAM_SET_MTU            42 /* set cached value for
-											  * MTU. want to use this
-                                              * if asking the kernel
-                                              * fails */
-
-#define BIO_CTRL_DGRAM_MTU_EXCEEDED       43 /* check whether the MTU
-											  * was exceed in the
-											  * previous write
-											  * operation */
-
-#define BIO_CTRL_DGRAM_SET_PEER           44 /* Destination for the data */
-
-
-/* modifiers */
-#define BIO_FP_READ		0x02
-#define BIO_FP_WRITE		0x04
-#define BIO_FP_APPEND		0x08
-#define BIO_FP_TEXT		0x10
-
-#define BIO_FLAGS_READ		0x01
-#define BIO_FLAGS_WRITE		0x02
-#define BIO_FLAGS_IO_SPECIAL	0x04
-#define BIO_FLAGS_RWS (BIO_FLAGS_READ|BIO_FLAGS_WRITE|BIO_FLAGS_IO_SPECIAL)
-#define BIO_FLAGS_SHOULD_RETRY	0x08
-#ifndef	BIO_FLAGS_UPLINK
-/* "UPLINK" flag denotes file descriptors provided by application.
-   It defaults to 0, as most platforms don't require UPLINK interface. */
-#define	BIO_FLAGS_UPLINK	0
-#endif
-
-/* Used in BIO_gethostbyname() */
-#define BIO_GHBN_CTRL_HITS		1
-#define BIO_GHBN_CTRL_MISSES		2
-#define BIO_GHBN_CTRL_CACHE_SIZE	3
-#define BIO_GHBN_CTRL_GET_ENTRY		4
-#define BIO_GHBN_CTRL_FLUSH		5
-
-/* Mostly used in the SSL BIO */
-/* Not used anymore
- * #define BIO_FLAGS_PROTOCOL_DELAYED_READ 0x10
- * #define BIO_FLAGS_PROTOCOL_DELAYED_WRITE 0x20
- * #define BIO_FLAGS_PROTOCOL_STARTUP	0x40
- */
-
-#define BIO_FLAGS_BASE64_NO_NL	0x100
-
-/* This is used with memory BIOs: it means we shouldn't free up or change the
- * data in any way.
- */
-#define BIO_FLAGS_MEM_RDONLY	0x200
-
-typedef struct bio_st BIO;
-
-void BIO_set_flags(BIO *b, int flags);
-int  BIO_test_flags(const BIO *b, int flags);
-void BIO_clear_flags(BIO *b, int flags);
-
-#define BIO_get_flags(b) BIO_test_flags(b, ~(0x0))
-#define BIO_set_retry_special(b) \
-		BIO_set_flags(b, (BIO_FLAGS_IO_SPECIAL|BIO_FLAGS_SHOULD_RETRY))
-#define BIO_set_retry_read(b) \
-		BIO_set_flags(b, (BIO_FLAGS_READ|BIO_FLAGS_SHOULD_RETRY))
-#define BIO_set_retry_write(b) \
-		BIO_set_flags(b, (BIO_FLAGS_WRITE|BIO_FLAGS_SHOULD_RETRY))
-
-/* These are normally used internally in BIOs */
-#define BIO_clear_retry_flags(b) \
-		BIO_clear_flags(b, (BIO_FLAGS_RWS|BIO_FLAGS_SHOULD_RETRY))
-#define BIO_get_retry_flags(b) \
-		BIO_test_flags(b, (BIO_FLAGS_RWS|BIO_FLAGS_SHOULD_RETRY))
-
-/* These should be used by the application to tell why we should retry */
-#define BIO_should_read(a)		BIO_test_flags(a, BIO_FLAGS_READ)
-#define BIO_should_write(a)		BIO_test_flags(a, BIO_FLAGS_WRITE)
-#define BIO_should_io_special(a)	BIO_test_flags(a, BIO_FLAGS_IO_SPECIAL)
-#define BIO_retry_type(a)		BIO_test_flags(a, BIO_FLAGS_RWS)
-#define BIO_should_retry(a)		BIO_test_flags(a, BIO_FLAGS_SHOULD_RETRY)
-
-/* The next three are used in conjunction with the
- * BIO_should_io_special() condition.  After this returns true,
- * BIO *BIO_get_retry_BIO(BIO *bio, int *reason); will walk the BIO 
- * stack and return the 'reason' for the special and the offending BIO.
- * Given a BIO, BIO_get_retry_reason(bio) will return the code. */
-/* Returned from the SSL bio when the certificate retrieval code had an error */
-#define BIO_RR_SSL_X509_LOOKUP		0x01
-/* Returned from the connect BIO when a connect would have blocked */
-#define BIO_RR_CONNECT			0x02
-/* Returned from the accept BIO when an accept would have blocked */
-#define BIO_RR_ACCEPT			0x03
-
-/* These are passed by the BIO callback */
-#define BIO_CB_FREE	0x01
-#define BIO_CB_READ	0x02
-#define BIO_CB_WRITE	0x03
-#define BIO_CB_PUTS	0x04
-#define BIO_CB_GETS	0x05
-#define BIO_CB_CTRL	0x06
-
-/* The callback is called before and after the underling operation,
- * The BIO_CB_RETURN flag indicates if it is after the call */
-#define BIO_CB_RETURN	0x80
-#define BIO_CB_return(a) ((a)|BIO_CB_RETURN))
-#define BIO_cb_pre(a)	(!((a)&BIO_CB_RETURN))
-#define BIO_cb_post(a)	((a)&BIO_CB_RETURN)
-
-long (*BIO_get_callback(const BIO *b)) (struct bio_st *,int,const char *,int, long,long);
-void BIO_set_callback(BIO *b, 
-	long (*callback)(struct bio_st *,int,const char *,int, long,long));
-char *BIO_get_callback_arg(const BIO *b);
-void BIO_set_callback_arg(BIO *b, char *arg);
-
-const char * BIO_method_name(const BIO *b);
-int BIO_method_type(const BIO *b);
-
-typedef void bio_info_cb(struct bio_st *, int, const char *, int, long, long);
-
-#ifndef OPENSSL_SYS_WIN16
-typedef struct bio_method_st
-	{
-	int type;
-	const char *name;
-	int (*bwrite)(BIO *, const char *, int);
-	int (*bread)(BIO *, char *, int);
-	int (*bputs)(BIO *, const char *);
-	int (*bgets)(BIO *, char *, int);
-	long (*ctrl)(BIO *, int, long, void *);
-	int (*create)(BIO *);
-	int (*destroy)(BIO *);
-        long (*callback_ctrl)(BIO *, int, bio_info_cb *);
-	} BIO_METHOD;
-#else
-typedef struct bio_method_st
-	{
-	int type;
-	const char *name;
-	int (_far *bwrite)();
-	int (_far *bread)();
-	int (_far *bputs)();
-	int (_far *bgets)();
-	long (_far *ctrl)();
-	int (_far *create)();
-	int (_far *destroy)();
-	long (_far *callback_ctrl)();
-	} BIO_METHOD;
-#endif
-
-struct bio_st
-	{
-	BIO_METHOD *method;
-	/* bio, mode, argp, argi, argl, ret */
-	long (*callback)(struct bio_st *,int,const char *,int, long,long);
-	char *cb_arg; /* first argument for the callback */
-
-	int init;
-	int shutdown;
-	int flags;	/* extra storage */
-	int retry_reason;
-	int num;
-	void *ptr;
-	struct bio_st *next_bio;	/* used by filter BIOs */
-	struct bio_st *prev_bio;	/* used by filter BIOs */
-	int references;
-	unsigned long num_read;
-	unsigned long num_write;
-
-	CRYPTO_EX_DATA ex_data;
-	};
-
-DECLARE_STACK_OF(BIO)
-
-typedef struct bio_f_buffer_ctx_struct
-	{
-	/* BIO *bio; */ /* this is now in the BIO struct */
-	int ibuf_size;	/* how big is the input buffer */
-	int obuf_size;	/* how big is the output buffer */
-
-	char *ibuf;		/* the char array */
-	int ibuf_len;		/* how many bytes are in it */
-	int ibuf_off;		/* write/read offset */
-
-	char *obuf;		/* the char array */
-	int obuf_len;		/* how many bytes are in it */
-	int obuf_off;		/* write/read offset */
-	} BIO_F_BUFFER_CTX;
-
-/* connect BIO stuff */
-#define BIO_CONN_S_BEFORE		1
-#define BIO_CONN_S_GET_IP		2
-#define BIO_CONN_S_GET_PORT		3
-#define BIO_CONN_S_CREATE_SOCKET	4
-#define BIO_CONN_S_CONNECT		5
-#define BIO_CONN_S_OK			6
-#define BIO_CONN_S_BLOCKED_CONNECT	7
-#define BIO_CONN_S_NBIO			8
-/*#define BIO_CONN_get_param_hostname	BIO_ctrl */
-
-#define BIO_C_SET_CONNECT			100
-#define BIO_C_DO_STATE_MACHINE			101
-#define BIO_C_SET_NBIO				102
-#define BIO_C_SET_PROXY_PARAM			103
-#define BIO_C_SET_FD				104
-#define BIO_C_GET_FD				105
-#define BIO_C_SET_FILE_PTR			106
-#define BIO_C_GET_FILE_PTR			107
-#define BIO_C_SET_FILENAME			108
-#define BIO_C_SET_SSL				109
-#define BIO_C_GET_SSL				110
-#define BIO_C_SET_MD				111
-#define BIO_C_GET_MD				112
-#define BIO_C_GET_CIPHER_STATUS			113
-#define BIO_C_SET_BUF_MEM			114
-#define BIO_C_GET_BUF_MEM_PTR			115
-#define BIO_C_GET_BUFF_NUM_LINES		116
-#define BIO_C_SET_BUFF_SIZE			117
-#define BIO_C_SET_ACCEPT			118
-#define BIO_C_SSL_MODE				119
-#define BIO_C_GET_MD_CTX			120
-#define BIO_C_GET_PROXY_PARAM			121
-#define BIO_C_SET_BUFF_READ_DATA		122 /* data to read first */
-#define BIO_C_GET_CONNECT			123
-#define BIO_C_GET_ACCEPT			124
-#define BIO_C_SET_SSL_RENEGOTIATE_BYTES		125
-#define BIO_C_GET_SSL_NUM_RENEGOTIATES		126
-#define BIO_C_SET_SSL_RENEGOTIATE_TIMEOUT	127
-#define BIO_C_FILE_SEEK				128
-#define BIO_C_GET_CIPHER_CTX			129
-#define BIO_C_SET_BUF_MEM_EOF_RETURN		130/*return end of input value*/
-#define BIO_C_SET_BIND_MODE			131
-#define BIO_C_GET_BIND_MODE			132
-#define BIO_C_FILE_TELL				133
-#define BIO_C_GET_SOCKS				134
-#define BIO_C_SET_SOCKS				135
-
-#define BIO_C_SET_WRITE_BUF_SIZE		136/* for BIO_s_bio */
-#define BIO_C_GET_WRITE_BUF_SIZE		137
-#define BIO_C_MAKE_BIO_PAIR			138
-#define BIO_C_DESTROY_BIO_PAIR			139
-#define BIO_C_GET_WRITE_GUARANTEE		140
-#define BIO_C_GET_READ_REQUEST			141
-#define BIO_C_SHUTDOWN_WR			142
-#define BIO_C_NREAD0				143
-#define BIO_C_NREAD				144
-#define BIO_C_NWRITE0				145
-#define BIO_C_NWRITE				146
-#define BIO_C_RESET_READ_REQUEST		147
-#define BIO_C_SET_MD_CTX			148
-
-
-#define BIO_set_app_data(s,arg)		BIO_set_ex_data(s,0,arg)
-#define BIO_get_app_data(s)		BIO_get_ex_data(s,0)
-
-/* BIO_s_connect() and BIO_s_socks4a_connect() */
-#define BIO_set_conn_hostname(b,name) BIO_ctrl(b,BIO_C_SET_CONNECT,0,(char *)name)
-#define BIO_set_conn_port(b,port) BIO_ctrl(b,BIO_C_SET_CONNECT,1,(char *)port)
-#define BIO_set_conn_ip(b,ip)	  BIO_ctrl(b,BIO_C_SET_CONNECT,2,(char *)ip)
-#define BIO_set_conn_int_port(b,port) BIO_ctrl(b,BIO_C_SET_CONNECT,3,(char *)port)
-#define BIO_get_conn_hostname(b)  BIO_ptr_ctrl(b,BIO_C_GET_CONNECT,0)
-#define BIO_get_conn_port(b)      BIO_ptr_ctrl(b,BIO_C_GET_CONNECT,1)
-#define BIO_get_conn_ip(b) 		 BIO_ptr_ctrl(b,BIO_C_GET_CONNECT,2)
-#define BIO_get_conn_int_port(b) BIO_int_ctrl(b,BIO_C_GET_CONNECT,3)
-
-
-#define BIO_set_nbio(b,n)	BIO_ctrl(b,BIO_C_SET_NBIO,(n),NULL)
-
-/* BIO_s_accept_socket() */
-#define BIO_set_accept_port(b,name) BIO_ctrl(b,BIO_C_SET_ACCEPT,0,(char *)name)
-#define BIO_get_accept_port(b)	BIO_ptr_ctrl(b,BIO_C_GET_ACCEPT,0)
-/* #define BIO_set_nbio(b,n)	BIO_ctrl(b,BIO_C_SET_NBIO,(n),NULL) */
-#define BIO_set_nbio_accept(b,n) BIO_ctrl(b,BIO_C_SET_ACCEPT,1,(n)?"a":NULL)
-#define BIO_set_accept_bios(b,bio) BIO_ctrl(b,BIO_C_SET_ACCEPT,2,(char *)bio)
-
-#define BIO_BIND_NORMAL			0
-#define BIO_BIND_REUSEADDR_IF_UNUSED	1
-#define BIO_BIND_REUSEADDR		2
-#define BIO_set_bind_mode(b,mode) BIO_ctrl(b,BIO_C_SET_BIND_MODE,mode,NULL)
-#define BIO_get_bind_mode(b,mode) BIO_ctrl(b,BIO_C_GET_BIND_MODE,0,NULL)
-
-#define BIO_do_connect(b)	BIO_do_handshake(b)
-#define BIO_do_accept(b)	BIO_do_handshake(b)
-#define BIO_do_handshake(b)	BIO_ctrl(b,BIO_C_DO_STATE_MACHINE,0,NULL)
-
-/* BIO_s_proxy_client() */
-#define BIO_set_url(b,url)	BIO_ctrl(b,BIO_C_SET_PROXY_PARAM,0,(char *)(url))
-#define BIO_set_proxies(b,p)	BIO_ctrl(b,BIO_C_SET_PROXY_PARAM,1,(char *)(p))
-/* BIO_set_nbio(b,n) */
-#define BIO_set_filter_bio(b,s) BIO_ctrl(b,BIO_C_SET_PROXY_PARAM,2,(char *)(s))
-/* BIO *BIO_get_filter_bio(BIO *bio); */
-#define BIO_set_proxy_cb(b,cb) BIO_callback_ctrl(b,BIO_C_SET_PROXY_PARAM,3,(void *(*cb)()))
-#define BIO_set_proxy_header(b,sk) BIO_ctrl(b,BIO_C_SET_PROXY_PARAM,4,(char *)sk)
-#define BIO_set_no_connect_return(b,bool) BIO_int_ctrl(b,BIO_C_SET_PROXY_PARAM,5,bool)
-
-#define BIO_get_proxy_header(b,skp) BIO_ctrl(b,BIO_C_GET_PROXY_PARAM,0,(char *)skp)
-#define BIO_get_proxies(b,pxy_p) BIO_ctrl(b,BIO_C_GET_PROXY_PARAM,1,(char *)(pxy_p))
-#define BIO_get_url(b,url)	BIO_ctrl(b,BIO_C_GET_PROXY_PARAM,2,(char *)(url))
-#define BIO_get_no_connect_return(b)	BIO_ctrl(b,BIO_C_GET_PROXY_PARAM,5,NULL)
-
-#define BIO_set_fd(b,fd,c)	BIO_int_ctrl(b,BIO_C_SET_FD,c,fd)
-#define BIO_get_fd(b,c)		BIO_ctrl(b,BIO_C_GET_FD,0,(char *)c)
-
-#define BIO_set_fp(b,fp,c)	BIO_ctrl(b,BIO_C_SET_FILE_PTR,c,(char *)fp)
-#define BIO_get_fp(b,fpp)	BIO_ctrl(b,BIO_C_GET_FILE_PTR,0,(char *)fpp)
-
-#define BIO_seek(b,ofs)	(int)BIO_ctrl(b,BIO_C_FILE_SEEK,ofs,NULL)
-#define BIO_tell(b)	(int)BIO_ctrl(b,BIO_C_FILE_TELL,0,NULL)
-
-/* name is cast to lose const, but might be better to route through a function
-   so we can do it safely */
-#ifdef CONST_STRICT
-/* If you are wondering why this isn't defined, its because CONST_STRICT is
- * purely a compile-time kludge to allow const to be checked.
- */
-int BIO_read_filename(BIO *b,const char *name);
-#else
-#define BIO_read_filename(b,name) BIO_ctrl(b,BIO_C_SET_FILENAME, \
-		BIO_CLOSE|BIO_FP_READ,(char *)name)
-#endif
-#define BIO_write_filename(b,name) BIO_ctrl(b,BIO_C_SET_FILENAME, \
-		BIO_CLOSE|BIO_FP_WRITE,name)
-#define BIO_append_filename(b,name) BIO_ctrl(b,BIO_C_SET_FILENAME, \
-		BIO_CLOSE|BIO_FP_APPEND,name)
-#define BIO_rw_filename(b,name) BIO_ctrl(b,BIO_C_SET_FILENAME, \
-		BIO_CLOSE|BIO_FP_READ|BIO_FP_WRITE,name)
-
-/* WARNING WARNING, this ups the reference count on the read bio of the
- * SSL structure.  This is because the ssl read BIO is now pointed to by
- * the next_bio field in the bio.  So when you free the BIO, make sure
- * you are doing a BIO_free_all() to catch the underlying BIO. */
-#define BIO_set_ssl(b,ssl,c)	BIO_ctrl(b,BIO_C_SET_SSL,c,(char *)ssl)
-#define BIO_get_ssl(b,sslp)	BIO_ctrl(b,BIO_C_GET_SSL,0,(char *)sslp)
-#define BIO_set_ssl_mode(b,client)	BIO_ctrl(b,BIO_C_SSL_MODE,client,NULL)
-#define BIO_set_ssl_renegotiate_bytes(b,num) \
-	BIO_ctrl(b,BIO_C_SET_SSL_RENEGOTIATE_BYTES,num,NULL);
-#define BIO_get_num_renegotiates(b) \
-	BIO_ctrl(b,BIO_C_GET_SSL_NUM_RENEGOTIATES,0,NULL);
-#define BIO_set_ssl_renegotiate_timeout(b,seconds) \
-	BIO_ctrl(b,BIO_C_SET_SSL_RENEGOTIATE_TIMEOUT,seconds,NULL);
-
-/* defined in evp.h */
-/* #define BIO_set_md(b,md)	BIO_ctrl(b,BIO_C_SET_MD,1,(char *)md) */
-
-#define BIO_get_mem_data(b,pp)	BIO_ctrl(b,BIO_CTRL_INFO,0,(char *)pp)
-#define BIO_set_mem_buf(b,bm,c)	BIO_ctrl(b,BIO_C_SET_BUF_MEM,c,(char *)bm)
-#define BIO_get_mem_ptr(b,pp)	BIO_ctrl(b,BIO_C_GET_BUF_MEM_PTR,0,(char *)pp)
-#define BIO_set_mem_eof_return(b,v) \
-				BIO_ctrl(b,BIO_C_SET_BUF_MEM_EOF_RETURN,v,NULL)
-
-/* For the BIO_f_buffer() type */
-#define BIO_get_buffer_num_lines(b)	BIO_ctrl(b,BIO_C_GET_BUFF_NUM_LINES,0,NULL)
-#define BIO_set_buffer_size(b,size)	BIO_ctrl(b,BIO_C_SET_BUFF_SIZE,size,NULL)
-#define BIO_set_read_buffer_size(b,size) BIO_int_ctrl(b,BIO_C_SET_BUFF_SIZE,size,0)
-#define BIO_set_write_buffer_size(b,size) BIO_int_ctrl(b,BIO_C_SET_BUFF_SIZE,size,1)
-#define BIO_set_buffer_read_data(b,buf,num) BIO_ctrl(b,BIO_C_SET_BUFF_READ_DATA,num,buf)
-
-/* Don't use the next one unless you know what you are doing :-) */
-#define BIO_dup_state(b,ret)	BIO_ctrl(b,BIO_CTRL_DUP,0,(char *)(ret))
-
-#define BIO_reset(b)		(int)BIO_ctrl(b,BIO_CTRL_RESET,0,NULL)
-#define BIO_eof(b)		(int)BIO_ctrl(b,BIO_CTRL_EOF,0,NULL)
-#define BIO_set_close(b,c)	(int)BIO_ctrl(b,BIO_CTRL_SET_CLOSE,(c),NULL)
-#define BIO_get_close(b)	(int)BIO_ctrl(b,BIO_CTRL_GET_CLOSE,0,NULL)
-#define BIO_pending(b)		(int)BIO_ctrl(b,BIO_CTRL_PENDING,0,NULL)
-#define BIO_wpending(b)		(int)BIO_ctrl(b,BIO_CTRL_WPENDING,0,NULL)
-/* ...pending macros have inappropriate return type */
-size_t BIO_ctrl_pending(BIO *b);
-size_t BIO_ctrl_wpending(BIO *b);
-#define BIO_flush(b)		(int)BIO_ctrl(b,BIO_CTRL_FLUSH,0,NULL)
-#define BIO_get_info_callback(b,cbp) (int)BIO_ctrl(b,BIO_CTRL_GET_CALLBACK,0, \
-						   cbp)
-#define BIO_set_info_callback(b,cb) (int)BIO_callback_ctrl(b,BIO_CTRL_SET_CALLBACK,cb)
-
-/* For the BIO_f_buffer() type */
-#define BIO_buffer_get_num_lines(b) BIO_ctrl(b,BIO_CTRL_GET,0,NULL)
-
-/* For BIO_s_bio() */
-#define BIO_set_write_buf_size(b,size) (int)BIO_ctrl(b,BIO_C_SET_WRITE_BUF_SIZE,size,NULL)
-#define BIO_get_write_buf_size(b,size) (size_t)BIO_ctrl(b,BIO_C_GET_WRITE_BUF_SIZE,size,NULL)
-#define BIO_make_bio_pair(b1,b2)   (int)BIO_ctrl(b1,BIO_C_MAKE_BIO_PAIR,0,b2)
-#define BIO_destroy_bio_pair(b)    (int)BIO_ctrl(b,BIO_C_DESTROY_BIO_PAIR,0,NULL)
-#define BIO_shutdown_wr(b) (int)BIO_ctrl(b, BIO_C_SHUTDOWN_WR, 0, NULL)
-/* macros with inappropriate type -- but ...pending macros use int too: */
-#define BIO_get_write_guarantee(b) (int)BIO_ctrl(b,BIO_C_GET_WRITE_GUARANTEE,0,NULL)
-#define BIO_get_read_request(b)    (int)BIO_ctrl(b,BIO_C_GET_READ_REQUEST,0,NULL)
-size_t BIO_ctrl_get_write_guarantee(BIO *b);
-size_t BIO_ctrl_get_read_request(BIO *b);
-int BIO_ctrl_reset_read_request(BIO *b);
-
-/* ctrl macros for dgram */
-#define BIO_ctrl_dgram_connect(b,peer)  \
-                     (int)BIO_ctrl(b,BIO_CTRL_DGRAM_CONNECT,0, (char *)peer)
-#define BIO_ctrl_set_connected(b, state, peer) \
-         (int)BIO_ctrl(b, BIO_CTRL_DGRAM_SET_CONNECTED, state, (char *)peer)
-#define BIO_dgram_recv_timedout(b) \
-         (int)BIO_ctrl(b, BIO_CTRL_DGRAM_GET_RECV_TIMER_EXP, 0, NULL)
-#define BIO_dgram_send_timedout(b) \
-         (int)BIO_ctrl(b, BIO_CTRL_DGRAM_GET_SEND_TIMER_EXP, 0, NULL)
-#define BIO_dgram_set_peer(b,peer) \
-         (int)BIO_ctrl(b, BIO_CTRL_DGRAM_SET_PEER, 0, (char *)peer)
-
-/* These two aren't currently implemented */
-/* int BIO_get_ex_num(BIO *bio); */
-/* void BIO_set_ex_free_func(BIO *bio,int idx,void (*cb)()); */
-int BIO_set_ex_data(BIO *bio,int idx,void *data);
-void *BIO_get_ex_data(BIO *bio,int idx);
-int BIO_get_ex_new_index(long argl, void *argp, CRYPTO_EX_new *new_func,
-	CRYPTO_EX_dup *dup_func, CRYPTO_EX_free *free_func);
-unsigned long BIO_number_read(BIO *bio);
-unsigned long BIO_number_written(BIO *bio);
-
-# ifndef OPENSSL_NO_FP_API
-#  if defined(OPENSSL_SYS_WIN16) && defined(_WINDLL)
-BIO_METHOD *BIO_s_file_internal(void);
-BIO *BIO_new_file_internal(char *filename, char *mode);
-BIO *BIO_new_fp_internal(FILE *stream, int close_flag);
-#    define BIO_s_file	BIO_s_file_internal
-#    define BIO_new_file	BIO_new_file_internal
-#    define BIO_new_fp	BIO_new_fp_internal
-#  else /* FP_API */
-BIO_METHOD *BIO_s_file(void );
-BIO *BIO_new_file(const char *filename, const char *mode);
-BIO *BIO_new_fp(FILE *stream, int close_flag);
-#    define BIO_s_file_internal		BIO_s_file
-#    define BIO_new_file_internal	BIO_new_file
-#    define BIO_new_fp_internal		BIO_s_file
-#  endif /* FP_API */
-# endif
-BIO *	BIO_new(BIO_METHOD *type);
-int	BIO_set(BIO *a,BIO_METHOD *type);
-int	BIO_free(BIO *a);
-void	BIO_vfree(BIO *a);
-int	BIO_read(BIO *b, void *data, int len);
-int	BIO_gets(BIO *bp,char *buf, int size);
-int	BIO_write(BIO *b, const void *data, int len);
-int	BIO_puts(BIO *bp,const char *buf);
-int	BIO_indent(BIO *b,int indent,int max);
-long	BIO_ctrl(BIO *bp,int cmd,long larg,void *parg);
-long BIO_callback_ctrl(BIO *b, int cmd, void (*fp)(struct bio_st *, int, const char *, int, long, long));
-char *	BIO_ptr_ctrl(BIO *bp,int cmd,long larg);
-long	BIO_int_ctrl(BIO *bp,int cmd,long larg,int iarg);
-BIO *	BIO_push(BIO *b,BIO *append);
-BIO *	BIO_pop(BIO *b);
-void	BIO_free_all(BIO *a);
-BIO *	BIO_find_type(BIO *b,int bio_type);
-BIO *	BIO_next(BIO *b);
-BIO *	BIO_get_retry_BIO(BIO *bio, int *reason);
-int	BIO_get_retry_reason(BIO *bio);
-BIO *	BIO_dup_chain(BIO *in);
-
-int BIO_nread0(BIO *bio, char **buf);
-int BIO_nread(BIO *bio, char **buf, int num);
-int BIO_nwrite0(BIO *bio, char **buf);
-int BIO_nwrite(BIO *bio, char **buf, int num);
-
-#ifndef OPENSSL_SYS_WIN16
-long BIO_debug_callback(BIO *bio,int cmd,const char *argp,int argi,
-	long argl,long ret);
-#else
-long _far _loadds BIO_debug_callback(BIO *bio,int cmd,const char *argp,int argi,
-	long argl,long ret);
-#endif
-
-BIO_METHOD *BIO_s_mem(void);
-BIO *BIO_new_mem_buf(void *buf, int len);
-BIO_METHOD *BIO_s_socket(void);
-BIO_METHOD *BIO_s_connect(void);
-BIO_METHOD *BIO_s_accept(void);
-BIO_METHOD *BIO_s_fd(void);
-#ifndef OPENSSL_SYS_OS2
-BIO_METHOD *BIO_s_log(void);
-#endif
-BIO_METHOD *BIO_s_bio(void);
-BIO_METHOD *BIO_s_null(void);
-BIO_METHOD *BIO_f_null(void);
-BIO_METHOD *BIO_f_buffer(void);
-#ifdef OPENSSL_SYS_VMS
-BIO_METHOD *BIO_f_linebuffer(void);
-#endif
-BIO_METHOD *BIO_f_nbio_test(void);
-#ifndef OPENSSL_NO_DGRAM
-BIO_METHOD *BIO_s_datagram(void);
-#endif
-
-/* BIO_METHOD *BIO_f_ber(void); */
-
-int BIO_sock_should_retry(int i);
-int BIO_sock_non_fatal_error(int error);
-int BIO_dgram_non_fatal_error(int error);
-
-int BIO_fd_should_retry(int i);
-int BIO_fd_non_fatal_error(int error);
-int BIO_dump_cb(int (*cb)(const void *data, size_t len, void *u),
-		void *u, const char *s, int len);
-int BIO_dump_indent_cb(int (*cb)(const void *data, size_t len, void *u),
-		       void *u, const char *s, int len, int indent);
-int BIO_dump(BIO *b,const char *bytes,int len);
-int BIO_dump_indent(BIO *b,const char *bytes,int len,int indent);
-#ifndef OPENSSL_NO_FP_API
-int BIO_dump_fp(FILE *fp, const char *s, int len);
-int BIO_dump_indent_fp(FILE *fp, const char *s, int len, int indent);
-#endif
-struct hostent *BIO_gethostbyname(const char *name);
-/* We might want a thread-safe interface too:
- * struct hostent *BIO_gethostbyname_r(const char *name,
- *     struct hostent *result, void *buffer, size_t buflen);
- * or something similar (caller allocates a struct hostent,
- * pointed to by "result", and additional buffer space for the various
- * substructures; if the buffer does not suffice, NULL is returned
- * and an appropriate error code is set).
- */
-int BIO_sock_error(int sock);
-int BIO_socket_ioctl(int fd, long type, void *arg);
-int BIO_socket_nbio(int fd,int mode);
-int BIO_get_port(const char *str, unsigned short *port_ptr);
-int BIO_get_host_ip(const char *str, unsigned char *ip);
-int BIO_get_accept_socket(char *host_port,int mode);
-int BIO_accept(int sock,char **ip_port);
-int BIO_sock_init(void );
-void BIO_sock_cleanup(void);
-int BIO_set_tcp_ndelay(int sock,int turn_on);
-
-BIO *BIO_new_socket(int sock, int close_flag);
-BIO *BIO_new_dgram(int fd, int close_flag);
-BIO *BIO_new_fd(int fd, int close_flag);
-BIO *BIO_new_connect(char *host_port);
-BIO *BIO_new_accept(char *host_port);
-
-int BIO_new_bio_pair(BIO **bio1, size_t writebuf1,
-	BIO **bio2, size_t writebuf2);
-/* If successful, returns 1 and in *bio1, *bio2 two BIO pair endpoints.
- * Otherwise returns 0 and sets *bio1 and *bio2 to NULL.
- * Size 0 uses default value.
- */
-
-void BIO_copy_next_retry(BIO *b);
-
-/*long BIO_ghbn_ctrl(int cmd,int iarg,char *parg);*/
-
-#ifdef __GNUC__
-#  define __bio_h__attr__ __attribute__
-#else
-#  define __bio_h__attr__(x)
-#endif
-int BIO_printf(BIO *bio, const char *format, ...)
-	__bio_h__attr__((__format__(__printf__,2,3)));
-int BIO_vprintf(BIO *bio, const char *format, va_list args)
-	__bio_h__attr__((__format__(__printf__,2,0)));
-int BIO_snprintf(char *buf, size_t n, const char *format, ...)
-	__bio_h__attr__((__format__(__printf__,3,4)));
-int BIO_vsnprintf(char *buf, size_t n, const char *format, va_list args)
-	__bio_h__attr__((__format__(__printf__,3,0)));
-#undef __bio_h__attr__
-
-/* BEGIN ERROR CODES */
-/* The following lines are auto generated by the script mkerr.pl. Any changes
- * made after this point may be overwritten when the script is next run.
- */
-void ERR_load_BIO_strings(void);
-
-/* Error codes for the BIO functions. */
-
-/* Function codes. */
-#define BIO_F_ACPT_STATE				 100
-#define BIO_F_BIO_ACCEPT				 101
-#define BIO_F_BIO_BER_GET_HEADER			 102
-#define BIO_F_BIO_CALLBACK_CTRL				 131
-#define BIO_F_BIO_CTRL					 103
-#define BIO_F_BIO_GETHOSTBYNAME				 120
-#define BIO_F_BIO_GETS					 104
-#define BIO_F_BIO_GET_ACCEPT_SOCKET			 105
-#define BIO_F_BIO_GET_HOST_IP				 106
-#define BIO_F_BIO_GET_PORT				 107
-#define BIO_F_BIO_MAKE_PAIR				 121
-#define BIO_F_BIO_NEW					 108
-#define BIO_F_BIO_NEW_FILE				 109
-#define BIO_F_BIO_NEW_MEM_BUF				 126
-#define BIO_F_BIO_NREAD					 123
-#define BIO_F_BIO_NREAD0				 124
-#define BIO_F_BIO_NWRITE				 125
-#define BIO_F_BIO_NWRITE0				 122
-#define BIO_F_BIO_PUTS					 110
-#define BIO_F_BIO_READ					 111
-#define BIO_F_BIO_SOCK_INIT				 112
-#define BIO_F_BIO_WRITE					 113
-#define BIO_F_BUFFER_CTRL				 114
-#define BIO_F_CONN_CTRL					 127
-#define BIO_F_CONN_STATE				 115
-#define BIO_F_FILE_CTRL					 116
-#define BIO_F_FILE_READ					 130
-#define BIO_F_LINEBUFFER_CTRL				 129
-#define BIO_F_MEM_READ					 128
-#define BIO_F_MEM_WRITE					 117
-#define BIO_F_SSL_NEW					 118
-#define BIO_F_WSASTARTUP				 119
-
-/* Reason codes. */
-#define BIO_R_ACCEPT_ERROR				 100
-#define BIO_R_BAD_FOPEN_MODE				 101
-#define BIO_R_BAD_HOSTNAME_LOOKUP			 102
-#define BIO_R_BROKEN_PIPE				 124
-#define BIO_R_CONNECT_ERROR				 103
-#define BIO_R_EOF_ON_MEMORY_BIO				 127
-#define BIO_R_ERROR_SETTING_NBIO			 104
-#define BIO_R_ERROR_SETTING_NBIO_ON_ACCEPTED_SOCKET	 105
-#define BIO_R_ERROR_SETTING_NBIO_ON_ACCEPT_SOCKET	 106
-#define BIO_R_GETHOSTBYNAME_ADDR_IS_NOT_AF_INET		 107
-#define BIO_R_INVALID_ARGUMENT				 125
-#define BIO_R_INVALID_IP_ADDRESS			 108
-#define BIO_R_IN_USE					 123
-#define BIO_R_KEEPALIVE					 109
-#define BIO_R_NBIO_CONNECT_ERROR			 110
-#define BIO_R_NO_ACCEPT_PORT_SPECIFIED			 111
-#define BIO_R_NO_HOSTNAME_SPECIFIED			 112
-#define BIO_R_NO_PORT_DEFINED				 113
-#define BIO_R_NO_PORT_SPECIFIED				 114
-#define BIO_R_NO_SUCH_FILE				 128
-#define BIO_R_NULL_PARAMETER				 115
-#define BIO_R_TAG_MISMATCH				 116
-#define BIO_R_UNABLE_TO_BIND_SOCKET			 117
-#define BIO_R_UNABLE_TO_CREATE_SOCKET			 118
-#define BIO_R_UNABLE_TO_LISTEN_SOCKET			 119
-#define BIO_R_UNINITIALIZED				 120
-#define BIO_R_UNSUPPORTED_METHOD			 121
-#define BIO_R_WRITE_TO_READ_ONLY_BIO			 126
-#define BIO_R_WSASTARTUP				 122
-
-#ifdef  __cplusplus
-}
-#endif
-#endif
diff --git a/crypto/openssl/crypto/bio/bio_cb.c b/crypto/openssl/crypto/bio/bio_cb.c
deleted file mode 100644
index 6f4254a1141a..000000000000
--- a/crypto/openssl/crypto/bio/bio_cb.c
+++ /dev/null
@@ -1,139 +0,0 @@
-/* crypto/bio/bio_cb.c */
-/* Copyright (C) 1995-1998 Eric Young (eay@cryptsoft.com)
- * All rights reserved.
- *
- * This package is an SSL implementation written
- * by Eric Young (eay@cryptsoft.com).
- * The implementation was written so as to conform with Netscapes SSL.
- * 
- * This library is free for commercial and non-commercial use as long as
- * the following conditions are aheared to.  The following conditions
- * apply to all code found in this distribution, be it the RC4, RSA,
- * lhash, DES, etc., code; not just the SSL code.  The SSL documentation
- * included with this distribution is covered by the same copyright terms
- * except that the holder is Tim Hudson (tjh@cryptsoft.com).
- * 
- * Copyright remains Eric Young's, and as such any Copyright notices in
- * the code are not to be removed.
- * If this package is used in a product, Eric Young should be given attribution
- * as the author of the parts of the library used.
- * This can be in the form of a textual message at program startup or
- * in documentation (online or textual) provided with the package.
- * 
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions
- * are met:
- * 1. Redistributions of source code must retain the copyright
- *    notice, this list of conditions and the following disclaimer.
- * 2. Redistributions in binary form must reproduce the above copyright
- *    notice, this list of conditions and the following disclaimer in the
- *    documentation and/or other materials provided with the distribution.
- * 3. All advertising materials mentioning features or use of this software
- *    must display the following acknowledgement:
- *    "This product includes cryptographic software written by
- *     Eric Young (eay@cryptsoft.com)"
- *    The word 'cryptographic' can be left out if the rouines from the library
- *    being used are not cryptographic related :-).
- * 4. If you include any Windows specific code (or a derivative thereof) from 
- *    the apps directory (application code) you must include an acknowledgement:
- *    "This product includes software written by Tim Hudson (tjh@cryptsoft.com)"
- * 
- * THIS SOFTWARE IS PROVIDED BY ERIC YOUNG ``AS IS'' AND
- * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
- * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
- * ARE DISCLAIMED.  IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE
- * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
- * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
- * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
- * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
- * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
- * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
- * SUCH DAMAGE.
- * 
- * The licence and distribution terms for any publically available version or
- * derivative of this code cannot be changed.  i.e. this code cannot simply be
- * copied and put under another distribution licence
- * [including the GNU Public Licence.]
- */
-
-#include <stdio.h>
-#include <string.h>
-#include <stdlib.h>
-#include "cryptlib.h"
-#include <openssl/bio.h>
-#include <openssl/err.h>
-
-long MS_CALLBACK BIO_debug_callback(BIO *bio, int cmd, const char *argp,
-	     int argi, long argl, long ret)
-	{
-	BIO *b;
-	MS_STATIC char buf[256];
-	char *p;
-	long r=1;
-	size_t p_maxlen;
-
-	if (BIO_CB_RETURN & cmd)
-		r=ret;
-
-	BIO_snprintf(buf,sizeof buf,"BIO[%08lX]:",(unsigned long)bio);
-	p= &(buf[14]);
-	p_maxlen = sizeof buf - 14;
-	switch (cmd)
-		{
-	case BIO_CB_FREE:
-		BIO_snprintf(p,p_maxlen,"Free - %s\n",bio->method->name);
-		break;
-	case BIO_CB_READ:
-		if (bio->method->type & BIO_TYPE_DESCRIPTOR)
-			BIO_snprintf(p,p_maxlen,"read(%d,%d) - %s fd=%d\n",
-				 bio->num,argi,bio->method->name,bio->num);
-		else
-			BIO_snprintf(p,p_maxlen,"read(%d,%d) - %s\n",
-				 bio->num,argi,bio->method->name);
-		break;
-	case BIO_CB_WRITE:
-		if (bio->method->type & BIO_TYPE_DESCRIPTOR)
-			BIO_snprintf(p,p_maxlen,"write(%d,%d) - %s fd=%d\n",
-				 bio->num,argi,bio->method->name,bio->num);
-		else
-			BIO_snprintf(p,p_maxlen,"write(%d,%d) - %s\n",
-				 bio->num,argi,bio->method->name);
-		break;
-	case BIO_CB_PUTS:
-		BIO_snprintf(p,p_maxlen,"puts() - %s\n",bio->method->name);
-		break;
-	case BIO_CB_GETS:
-		BIO_snprintf(p,p_maxlen,"gets(%d) - %s\n",argi,bio->method->name);
-		break;
-	case BIO_CB_CTRL:
-		BIO_snprintf(p,p_maxlen,"ctrl(%d) - %s\n",argi,bio->method->name);
-		break;
-	case BIO_CB_RETURN|BIO_CB_READ:
-		BIO_snprintf(p,p_maxlen,"read return %ld\n",ret);
-		break;
-	case BIO_CB_RETURN|BIO_CB_WRITE:
-		BIO_snprintf(p,p_maxlen,"write return %ld\n",ret);
-		break;
-	case BIO_CB_RETURN|BIO_CB_GETS:
-		BIO_snprintf(p,p_maxlen,"gets return %ld\n",ret);
-		break;
-	case BIO_CB_RETURN|BIO_CB_PUTS:
-		BIO_snprintf(p,p_maxlen,"puts return %ld\n",ret);
-		break;
-	case BIO_CB_RETURN|BIO_CB_CTRL:
-		BIO_snprintf(p,p_maxlen,"ctrl return %ld\n",ret);
-		break;
-	default:
-		BIO_snprintf(p,p_maxlen,"bio callback - unknown type (%d)\n",cmd);
-		break;
-		}
-
-	b=(BIO *)bio->cb_arg;
-	if (b != NULL)
-		BIO_write(b,buf,strlen(buf));
-#if !defined(OPENSSL_NO_STDIO) && !defined(OPENSSL_SYS_WIN16)
-	else
-		fputs(buf,stderr);
-#endif
-	return(r);
-	}
diff --git a/crypto/openssl/crypto/bio/bio_err.c b/crypto/openssl/crypto/bio/bio_err.c
deleted file mode 100644
index 6603f1c74dc8..000000000000
--- a/crypto/openssl/crypto/bio/bio_err.c
+++ /dev/null
@@ -1,154 +0,0 @@
-/* crypto/bio/bio_err.c */
-/* ====================================================================
- * Copyright (c) 1999-2005 The OpenSSL Project.  All rights reserved.
- *
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions
- * are met:
- *
- * 1. Redistributions of source code must retain the above copyright
- *    notice, this list of conditions and the following disclaimer. 
- *
- * 2. Redistributions in binary form must reproduce the above copyright
- *    notice, this list of conditions and the following disclaimer in
- *    the documentation and/or other materials provided with the
- *    distribution.
- *
- * 3. All advertising materials mentioning features or use of this
- *    software must display the following acknowledgment:
- *    "This product includes software developed by the OpenSSL Project
- *    for use in the OpenSSL Toolkit. (http://www.OpenSSL.org/)"
- *
- * 4. The names "OpenSSL Toolkit" and "OpenSSL Project" must not be used to
- *    endorse or promote products derived from this software without
- *    prior written permission. For written permission, please contact
- *    openssl-core@OpenSSL.org.
- *
- * 5. Products derived from this software may not be called "OpenSSL"
- *    nor may "OpenSSL" appear in their names without prior written
- *    permission of the OpenSSL Project.
- *
- * 6. Redistributions of any form whatsoever must retain the following
- *    acknowledgment:
- *    "This product includes software developed by the OpenSSL Project
- *    for use in the OpenSSL Toolkit (http://www.OpenSSL.org/)"
- *
- * THIS SOFTWARE IS PROVIDED BY THE OpenSSL PROJECT ``AS IS'' AND ANY
- * EXPRESSED OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
- * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR
- * PURPOSE ARE DISCLAIMED.  IN NO EVENT SHALL THE OpenSSL PROJECT OR
- * ITS CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
- * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
- * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
- * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
- * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
- * STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
- * ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED
- * OF THE POSSIBILITY OF SUCH DAMAGE.
- * ====================================================================
- *
- * This product includes cryptographic software written by Eric Young
- * (eay@cryptsoft.com).  This product includes software written by Tim
- * Hudson (tjh@cryptsoft.com).
- *
- */
-
-/* NOTE: this file was auto generated by the mkerr.pl script: any changes
- * made to it will be overwritten when the script next updates this file,
- * only reason strings will be preserved.
- */
-
-#include <stdio.h>
-#include <openssl/err.h>
-#include <openssl/bio.h>
-
-/* BEGIN ERROR CODES */
-#ifndef OPENSSL_NO_ERR
-
-#define ERR_FUNC(func) ERR_PACK(ERR_LIB_BIO,func,0)
-#define ERR_REASON(reason) ERR_PACK(ERR_LIB_BIO,0,reason)
-
-static ERR_STRING_DATA BIO_str_functs[]=
-	{
-{ERR_FUNC(BIO_F_ACPT_STATE),	"ACPT_STATE"},
-{ERR_FUNC(BIO_F_BIO_ACCEPT),	"BIO_accept"},
-{ERR_FUNC(BIO_F_BIO_BER_GET_HEADER),	"BIO_BER_GET_HEADER"},
-{ERR_FUNC(BIO_F_BIO_CALLBACK_CTRL),	"BIO_callback_ctrl"},
-{ERR_FUNC(BIO_F_BIO_CTRL),	"BIO_ctrl"},
-{ERR_FUNC(BIO_F_BIO_GETHOSTBYNAME),	"BIO_gethostbyname"},
-{ERR_FUNC(BIO_F_BIO_GETS),	"BIO_gets"},
-{ERR_FUNC(BIO_F_BIO_GET_ACCEPT_SOCKET),	"BIO_get_accept_socket"},
-{ERR_FUNC(BIO_F_BIO_GET_HOST_IP),	"BIO_get_host_ip"},
-{ERR_FUNC(BIO_F_BIO_GET_PORT),	"BIO_get_port"},
-{ERR_FUNC(BIO_F_BIO_MAKE_PAIR),	"BIO_MAKE_PAIR"},
-{ERR_FUNC(BIO_F_BIO_NEW),	"BIO_new"},
-{ERR_FUNC(BIO_F_BIO_NEW_FILE),	"BIO_new_file"},
-{ERR_FUNC(BIO_F_BIO_NEW_MEM_BUF),	"BIO_new_mem_buf"},
-{ERR_FUNC(BIO_F_BIO_NREAD),	"BIO_nread"},
-{ERR_FUNC(BIO_F_BIO_NREAD0),	"BIO_nread0"},
-{ERR_FUNC(BIO_F_BIO_NWRITE),	"BIO_nwrite"},
-{ERR_FUNC(BIO_F_BIO_NWRITE0),	"BIO_nwrite0"},
-{ERR_FUNC(BIO_F_BIO_PUTS),	"BIO_puts"},
-{ERR_FUNC(BIO_F_BIO_READ),	"BIO_read"},
-{ERR_FUNC(BIO_F_BIO_SOCK_INIT),	"BIO_sock_init"},
-{ERR_FUNC(BIO_F_BIO_WRITE),	"BIO_write"},
-{ERR_FUNC(BIO_F_BUFFER_CTRL),	"BUFFER_CTRL"},
-{ERR_FUNC(BIO_F_CONN_CTRL),	"CONN_CTRL"},
-{ERR_FUNC(BIO_F_CONN_STATE),	"CONN_STATE"},
-{ERR_FUNC(BIO_F_FILE_CTRL),	"FILE_CTRL"},
-{ERR_FUNC(BIO_F_FILE_READ),	"FILE_READ"},
-{ERR_FUNC(BIO_F_LINEBUFFER_CTRL),	"LINEBUFFER_CTRL"},
-{ERR_FUNC(BIO_F_MEM_READ),	"MEM_READ"},
-{ERR_FUNC(BIO_F_MEM_WRITE),	"MEM_WRITE"},
-{ERR_FUNC(BIO_F_SSL_NEW),	"SSL_new"},
-{ERR_FUNC(BIO_F_WSASTARTUP),	"WSASTARTUP"},
-{0,NULL}
-	};
-
-static ERR_STRING_DATA BIO_str_reasons[]=
-	{
-{ERR_REASON(BIO_R_ACCEPT_ERROR)          ,"accept error"},
-{ERR_REASON(BIO_R_BAD_FOPEN_MODE)        ,"bad fopen mode"},
-{ERR_REASON(BIO_R_BAD_HOSTNAME_LOOKUP)   ,"bad hostname lookup"},
-{ERR_REASON(BIO_R_BROKEN_PIPE)           ,"broken pipe"},
-{ERR_REASON(BIO_R_CONNECT_ERROR)         ,"connect error"},
-{ERR_REASON(BIO_R_EOF_ON_MEMORY_BIO)     ,"EOF on memory BIO"},
-{ERR_REASON(BIO_R_ERROR_SETTING_NBIO)    ,"error setting nbio"},
-{ERR_REASON(BIO_R_ERROR_SETTING_NBIO_ON_ACCEPTED_SOCKET),"error setting nbio on accepted socket"},
-{ERR_REASON(BIO_R_ERROR_SETTING_NBIO_ON_ACCEPT_SOCKET),"error setting nbio on accept socket"},
-{ERR_REASON(BIO_R_GETHOSTBYNAME_ADDR_IS_NOT_AF_INET),"gethostbyname addr is not af inet"},
-{ERR_REASON(BIO_R_INVALID_ARGUMENT)      ,"invalid argument"},
-{ERR_REASON(BIO_R_INVALID_IP_ADDRESS)    ,"invalid ip address"},
-{ERR_REASON(BIO_R_IN_USE)                ,"in use"},
-{ERR_REASON(BIO_R_KEEPALIVE)             ,"keepalive"},
-{ERR_REASON(BIO_R_NBIO_CONNECT_ERROR)    ,"nbio connect error"},
-{ERR_REASON(BIO_R_NO_ACCEPT_PORT_SPECIFIED),"no accept port specified"},
-{ERR_REASON(BIO_R_NO_HOSTNAME_SPECIFIED) ,"no hostname specified"},
-{ERR_REASON(BIO_R_NO_PORT_DEFINED)       ,"no port defined"},
-{ERR_REASON(BIO_R_NO_PORT_SPECIFIED)     ,"no port specified"},
-{ERR_REASON(BIO_R_NO_SUCH_FILE)          ,"no such file"},
-{ERR_REASON(BIO_R_NULL_PARAMETER)        ,"null parameter"},
-{ERR_REASON(BIO_R_TAG_MISMATCH)          ,"tag mismatch"},
-{ERR_REASON(BIO_R_UNABLE_TO_BIND_SOCKET) ,"unable to bind socket"},
-{ERR_REASON(BIO_R_UNABLE_TO_CREATE_SOCKET),"unable to create socket"},
-{ERR_REASON(BIO_R_UNABLE_TO_LISTEN_SOCKET),"unable to listen socket"},
-{ERR_REASON(BIO_R_UNINITIALIZED)         ,"uninitialized"},
-{ERR_REASON(BIO_R_UNSUPPORTED_METHOD)    ,"unsupported method"},
-{ERR_REASON(BIO_R_WRITE_TO_READ_ONLY_BIO),"write to read only BIO"},
-{ERR_REASON(BIO_R_WSASTARTUP)            ,"WSAStartup"},
-{0,NULL}
-	};
-
-#endif
-
-void ERR_load_BIO_strings(void)
-	{
-#ifndef OPENSSL_NO_ERR
-
-	if (ERR_func_error_string(BIO_str_functs[0].error) == NULL)
-		{
-		ERR_load_strings(0,BIO_str_functs);
-		ERR_load_strings(0,BIO_str_reasons);
-		}
-#endif
-	}
diff --git a/crypto/openssl/crypto/bio/bio_lcl.h b/crypto/openssl/crypto/bio/bio_lcl.h
deleted file mode 100644
index dba2919d430c..000000000000
--- a/crypto/openssl/crypto/bio/bio_lcl.h
+++ /dev/null
@@ -1,28 +0,0 @@
-#include <openssl/bio.h>
-
-#if BIO_FLAGS_UPLINK==0
-/* Shortcut UPLINK calls on most platforms... */
-#define	UP_stdin	stdin
-#define	UP_stdout	stdout
-#define	UP_stderr	stderr
-#define	UP_fprintf	fprintf
-#define	UP_fgets	fgets
-#define	UP_fread	fread
-#define	UP_fwrite	fwrite
-#undef	UP_fsetmod
-#define	UP_feof		feof
-#define	UP_fclose	fclose
-
-#define	UP_fopen	fopen
-#define	UP_fseek	fseek
-#define	UP_ftell	ftell
-#define	UP_fflush	fflush
-#define	UP_ferror	ferror
-#define	UP_fileno	fileno
-
-#define	UP_open		open
-#define	UP_read		read
-#define	UP_write	write
-#define	UP_lseek	lseek
-#define	UP_close	close
-#endif
diff --git a/crypto/openssl/crypto/bio/bio_lib.c b/crypto/openssl/crypto/bio/bio_lib.c
deleted file mode 100644
index 3f52ae953c29..000000000000
--- a/crypto/openssl/crypto/bio/bio_lib.c
+++ /dev/null
@@ -1,602 +0,0 @@
-/* crypto/bio/bio_lib.c */
-/* Copyright (C) 1995-1998 Eric Young (eay@cryptsoft.com)
- * All rights reserved.
- *
- * This package is an SSL implementation written
- * by Eric Young (eay@cryptsoft.com).
- * The implementation was written so as to conform with Netscapes SSL.
- * 
- * This library is free for commercial and non-commercial use as long as
- * the following conditions are aheared to.  The following conditions
- * apply to all code found in this distribution, be it the RC4, RSA,
- * lhash, DES, etc., code; not just the SSL code.  The SSL documentation
- * included with this distribution is covered by the same copyright terms
- * except that the holder is Tim Hudson (tjh@cryptsoft.com).
- * 
- * Copyright remains Eric Young's, and as such any Copyright notices in
- * the code are not to be removed.
- * If this package is used in a product, Eric Young should be given attribution
- * as the author of the parts of the library used.
- * This can be in the form of a textual message at program startup or
- * in documentation (online or textual) provided with the package.
- * 
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions
- * are met:
- * 1. Redistributions of source code must retain the copyright
- *    notice, this list of conditions and the following disclaimer.
- * 2. Redistributions in binary form must reproduce the above copyright
- *    notice, this list of conditions and the following disclaimer in the
- *    documentation and/or other materials provided with the distribution.
- * 3. All advertising materials mentioning features or use of this software
- *    must display the following acknowledgement:
- *    "This product includes cryptographic software written by
- *     Eric Young (eay@cryptsoft.com)"
- *    The word 'cryptographic' can be left out if the rouines from the library
- *    being used are not cryptographic related :-).
- * 4. If you include any Windows specific code (or a derivative thereof) from 
- *    the apps directory (application code) you must include an acknowledgement:
- *    "This product includes software written by Tim Hudson (tjh@cryptsoft.com)"
- * 
- * THIS SOFTWARE IS PROVIDED BY ERIC YOUNG ``AS IS'' AND
- * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
- * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
- * ARE DISCLAIMED.  IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE
- * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
- * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
- * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
- * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
- * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
- * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
- * SUCH DAMAGE.
- * 
- * The licence and distribution terms for any publically available version or
- * derivative of this code cannot be changed.  i.e. this code cannot simply be
- * copied and put under another distribution licence
- * [including the GNU Public Licence.]
- */
-
-#include <stdio.h>
-#include <errno.h>
-#include <openssl/crypto.h>
-#include "cryptlib.h"
-#include <openssl/bio.h>
-#include <openssl/stack.h>
-
-BIO *BIO_new(BIO_METHOD *method)
-	{
-	BIO *ret=NULL;
-
-	ret=(BIO *)OPENSSL_malloc(sizeof(BIO));
-	if (ret == NULL)
-		{
-		BIOerr(BIO_F_BIO_NEW,ERR_R_MALLOC_FAILURE);
-		return(NULL);
-		}
-	if (!BIO_set(ret,method))
-		{
-		OPENSSL_free(ret);
-		ret=NULL;
-		}
-	return(ret);
-	}
-
-int BIO_set(BIO *bio, BIO_METHOD *method)
-	{
-	bio->method=method;
-	bio->callback=NULL;
-	bio->cb_arg=NULL;
-	bio->init=0;
-	bio->shutdown=1;
-	bio->flags=0;
-	bio->retry_reason=0;
-	bio->num=0;
-	bio->ptr=NULL;
-	bio->prev_bio=NULL;
-	bio->next_bio=NULL;
-	bio->references=1;
-	bio->num_read=0L;
-	bio->num_write=0L;
-	CRYPTO_new_ex_data(CRYPTO_EX_INDEX_BIO, bio, &bio->ex_data);
-	if (method->create != NULL)
-		if (!method->create(bio))
-			{
-			CRYPTO_free_ex_data(CRYPTO_EX_INDEX_BIO, bio,
-					&bio->ex_data);
-			return(0);
-			}
-	return(1);
-	}
-
-int BIO_free(BIO *a)
-	{
-	int ret=0,i;
-
-	if (a == NULL) return(0);
-
-	i=CRYPTO_add(&a->references,-1,CRYPTO_LOCK_BIO);
-#ifdef REF_PRINT
-	REF_PRINT("BIO",a);
-#endif
-	if (i > 0) return(1);
-#ifdef REF_CHECK
-	if (i < 0)
-		{
-		fprintf(stderr,"BIO_free, bad reference count\n");
-		abort();
-		}
-#endif
-	if ((a->callback != NULL) &&
-		((i=(int)a->callback(a,BIO_CB_FREE,NULL,0,0L,1L)) <= 0))
-			return(i);
-
-	CRYPTO_free_ex_data(CRYPTO_EX_INDEX_BIO, a, &a->ex_data);
-
-	if ((a->method == NULL) || (a->method->destroy == NULL)) return(1);
-	ret=a->method->destroy(a);
-	OPENSSL_free(a);
-	return(1);
-	}
-
-void BIO_vfree(BIO *a)
-    { BIO_free(a); }
-
-void BIO_clear_flags(BIO *b, int flags)
-	{
-	b->flags &= ~flags;
-	}
-
-int	BIO_test_flags(const BIO *b, int flags)
-	{
-	return (b->flags & flags);
-	}
-
-void	BIO_set_flags(BIO *b, int flags)
-	{
-	b->flags |= flags;
-	}
-
-long (*BIO_get_callback(const BIO *b))(struct bio_st *,int,const char *,int, long,long)
-	{
-	return b->callback;
-	}
-
-void BIO_set_callback(BIO *b, long (*cb)(struct bio_st *,int,const char *,int, long,long))
-	{
-	b->callback = cb;
-	}
-
-void BIO_set_callback_arg(BIO *b, char *arg)
-	{
-	b->cb_arg = arg;
-	}
-
-char * BIO_get_callback_arg(const BIO *b)
-	{
-	return b->cb_arg;
-	}
-
-const char * BIO_method_name(const BIO *b)
-	{
-	return b->method->name;
-	}
-
-int BIO_method_type(const BIO *b)
-	{
-	return b->method->type;
-	}
-
-
-int BIO_read(BIO *b, void *out, int outl)
-	{
-	int i;
-	long (*cb)(BIO *,int,const char *,int,long,long);
-
-	if ((b == NULL) || (b->method == NULL) || (b->method->bread == NULL))
-		{
-		BIOerr(BIO_F_BIO_READ,BIO_R_UNSUPPORTED_METHOD);
-		return(-2);
-		}
-
-	cb=b->callback;
-	if ((cb != NULL) &&
-		((i=(int)cb(b,BIO_CB_READ,out,outl,0L,1L)) <= 0))
-			return(i);
-
-	if (!b->init)
-		{
-		BIOerr(BIO_F_BIO_READ,BIO_R_UNINITIALIZED);
-		return(-2);
-		}
-
-	i=b->method->bread(b,out,outl);
-
-	if (i > 0) b->num_read+=(unsigned long)i;
-
-	if (cb != NULL)
-		i=(int)cb(b,BIO_CB_READ|BIO_CB_RETURN,out,outl,
-			0L,(long)i);
-	return(i);
-	}
-
-int BIO_write(BIO *b, const void *in, int inl)
-	{
-	int i;
-	long (*cb)(BIO *,int,const char *,int,long,long);
-
-	if (b == NULL)
-		return(0);
-
-	cb=b->callback;
-	if ((b->method == NULL) || (b->method->bwrite == NULL))
-		{
-		BIOerr(BIO_F_BIO_WRITE,BIO_R_UNSUPPORTED_METHOD);
-		return(-2);
-		}
-
-	if ((cb != NULL) &&
-		((i=(int)cb(b,BIO_CB_WRITE,in,inl,0L,1L)) <= 0))
-			return(i);
-
-	if (!b->init)
-		{
-		BIOerr(BIO_F_BIO_WRITE,BIO_R_UNINITIALIZED);
-		return(-2);
-		}
-
-	i=b->method->bwrite(b,in,inl);
-
-	if (i > 0) b->num_write+=(unsigned long)i;
-
-	if (cb != NULL)
-		i=(int)cb(b,BIO_CB_WRITE|BIO_CB_RETURN,in,inl,
-			0L,(long)i);
-	return(i);
-	}
-
-int BIO_puts(BIO *b, const char *in)
-	{
-	int i;
-	long (*cb)(BIO *,int,const char *,int,long,long);
-
-	if ((b == NULL) || (b->method == NULL) || (b->method->bputs == NULL))
-		{
-		BIOerr(BIO_F_BIO_PUTS,BIO_R_UNSUPPORTED_METHOD);
-		return(-2);
-		}
-
-	cb=b->callback;
-
-	if ((cb != NULL) &&
-		((i=(int)cb(b,BIO_CB_PUTS,in,0,0L,1L)) <= 0))
-			return(i);
-
-	if (!b->init)
-		{
-		BIOerr(BIO_F_BIO_PUTS,BIO_R_UNINITIALIZED);
-		return(-2);
-		}
-
-	i=b->method->bputs(b,in);
-
-	if (i > 0) b->num_write+=(unsigned long)i;
-
-	if (cb != NULL)
-		i=(int)cb(b,BIO_CB_PUTS|BIO_CB_RETURN,in,0,
-			0L,(long)i);
-	return(i);
-	}
-
-int BIO_gets(BIO *b, char *in, int inl)
-	{
-	int i;
-	long (*cb)(BIO *,int,const char *,int,long,long);
-
-	if ((b == NULL) || (b->method == NULL) || (b->method->bgets == NULL))
-		{
-		BIOerr(BIO_F_BIO_GETS,BIO_R_UNSUPPORTED_METHOD);
-		return(-2);
-		}
-
-	cb=b->callback;
-
-	if ((cb != NULL) &&
-		((i=(int)cb(b,BIO_CB_GETS,in,inl,0L,1L)) <= 0))
-			return(i);
-
-	if (!b->init)
-		{
-		BIOerr(BIO_F_BIO_GETS,BIO_R_UNINITIALIZED);
-		return(-2);
-		}
-
-	i=b->method->bgets(b,in,inl);
-
-	if (cb != NULL)
-		i=(int)cb(b,BIO_CB_GETS|BIO_CB_RETURN,in,inl,
-			0L,(long)i);
-	return(i);
-	}
-
-int BIO_indent(BIO *b,int indent,int max)
-	{
-	if(indent < 0)
-		indent=0;
-	if(indent > max)
-		indent=max;
-	while(indent--)
-		if(BIO_puts(b," ") != 1)
-			return 0;
-	return 1;
-	}
-
-long BIO_int_ctrl(BIO *b, int cmd, long larg, int iarg)
-	{
-	int i;
-
-	i=iarg;
-	return(BIO_ctrl(b,cmd,larg,(char *)&i));
-	}
-
-char *BIO_ptr_ctrl(BIO *b, int cmd, long larg)
-	{
-	char *p=NULL;
-
-	if (BIO_ctrl(b,cmd,larg,(char *)&p) <= 0)
-		return(NULL);
-	else
-		return(p);
-	}
-
-long BIO_ctrl(BIO *b, int cmd, long larg, void *parg)
-	{
-	long ret;
-	long (*cb)(BIO *,int,const char *,int,long,long);
-
-	if (b == NULL) return(0);
-
-	if ((b->method == NULL) || (b->method->ctrl == NULL))
-		{
-		BIOerr(BIO_F_BIO_CTRL,BIO_R_UNSUPPORTED_METHOD);
-		return(-2);
-		}
-
-	cb=b->callback;
-
-	if ((cb != NULL) &&
-		((ret=cb(b,BIO_CB_CTRL,parg,cmd,larg,1L)) <= 0))
-		return(ret);
-
-	ret=b->method->ctrl(b,cmd,larg,parg);
-
-	if (cb != NULL)
-		ret=cb(b,BIO_CB_CTRL|BIO_CB_RETURN,parg,cmd,
-			larg,ret);
-	return(ret);
-	}
-
-long BIO_callback_ctrl(BIO *b, int cmd, void (*fp)(struct bio_st *, int, const char *, int, long, long))
-	{
-	long ret;
-	long (*cb)(BIO *,int,const char *,int,long,long);
-
-	if (b == NULL) return(0);
-
-	if ((b->method == NULL) || (b->method->callback_ctrl == NULL))
-		{
-		BIOerr(BIO_F_BIO_CALLBACK_CTRL,BIO_R_UNSUPPORTED_METHOD);
-		return(-2);
-		}
-
-	cb=b->callback;
-
-	if ((cb != NULL) &&
-		((ret=cb(b,BIO_CB_CTRL,(void *)&fp,cmd,0,1L)) <= 0))
-		return(ret);
-
-	ret=b->method->callback_ctrl(b,cmd,fp);
-
-	if (cb != NULL)
-		ret=cb(b,BIO_CB_CTRL|BIO_CB_RETURN,(void *)&fp,cmd,
-			0,ret);
-	return(ret);
-	}
-
-/* It is unfortunate to duplicate in functions what the BIO_(w)pending macros
- * do; but those macros have inappropriate return type, and for interfacing
- * from other programming languages, C macros aren't much of a help anyway. */
-size_t BIO_ctrl_pending(BIO *bio)
-	{
-	return BIO_ctrl(bio, BIO_CTRL_PENDING, 0, NULL);
-	}
-
-size_t BIO_ctrl_wpending(BIO *bio)
-	{
-	return BIO_ctrl(bio, BIO_CTRL_WPENDING, 0, NULL);
-	}
-
-
-/* put the 'bio' on the end of b's list of operators */
-BIO *BIO_push(BIO *b, BIO *bio)
-	{
-	BIO *lb;
-
-	if (b == NULL) return(bio);
-	lb=b;
-	while (lb->next_bio != NULL)
-		lb=lb->next_bio;
-	lb->next_bio=bio;
-	if (bio != NULL)
-		bio->prev_bio=lb;
-	/* called to do internal processing */
-	BIO_ctrl(b,BIO_CTRL_PUSH,0,NULL);
-	return(b);
-	}
-
-/* Remove the first and return the rest */
-BIO *BIO_pop(BIO *b)
-	{
-	BIO *ret;
-
-	if (b == NULL) return(NULL);
-	ret=b->next_bio;
-
-	BIO_ctrl(b,BIO_CTRL_POP,0,NULL);
-
-	if (b->prev_bio != NULL)
-		b->prev_bio->next_bio=b->next_bio;
-	if (b->next_bio != NULL)
-		b->next_bio->prev_bio=b->prev_bio;
-
-	b->next_bio=NULL;
-	b->prev_bio=NULL;
-	return(ret);
-	}
-
-BIO *BIO_get_retry_BIO(BIO *bio, int *reason)
-	{
-	BIO *b,*last;
-
-	b=last=bio;
-	for (;;)
-		{
-		if (!BIO_should_retry(b)) break;
-		last=b;
-		b=b->next_bio;
-		if (b == NULL) break;
-		}
-	if (reason != NULL) *reason=last->retry_reason;
-	return(last);
-	}
-
-int BIO_get_retry_reason(BIO *bio)
-	{
-	return(bio->retry_reason);
-	}
-
-BIO *BIO_find_type(BIO *bio, int type)
-	{
-	int mt,mask;
-
-	if(!bio) return NULL;
-	mask=type&0xff;
-	do	{
-		if (bio->method != NULL)
-			{
-			mt=bio->method->type;
-
-			if (!mask)
-				{
-				if (mt & type) return(bio);
-				}
-			else if (mt == type)
-				return(bio);
-			}
-		bio=bio->next_bio;
-		} while (bio != NULL);
-	return(NULL);
-	}
-
-BIO *BIO_next(BIO *b)
-	{
-	if(!b) return NULL;
-	return b->next_bio;
-	}
-
-void BIO_free_all(BIO *bio)
-	{
-	BIO *b;
-	int ref;
-
-	while (bio != NULL)
-		{
-		b=bio;
-		ref=b->references;
-		bio=bio->next_bio;
-		BIO_free(b);
-		/* Since ref count > 1, don't free anyone else. */
-		if (ref > 1) break;
-		}
-	}
-
-BIO *BIO_dup_chain(BIO *in)
-	{
-	BIO *ret=NULL,*eoc=NULL,*bio,*new;
-
-	for (bio=in; bio != NULL; bio=bio->next_bio)
-		{
-		if ((new=BIO_new(bio->method)) == NULL) goto err;
-		new->callback=bio->callback;
-		new->cb_arg=bio->cb_arg;
-		new->init=bio->init;
-		new->shutdown=bio->shutdown;
-		new->flags=bio->flags;
-
-		/* This will let SSL_s_sock() work with stdin/stdout */
-		new->num=bio->num;
-
-		if (!BIO_dup_state(bio,(char *)new))
-			{
-			BIO_free(new);
-			goto err;
-			}
-
-		/* copy app data */
-		if (!CRYPTO_dup_ex_data(CRYPTO_EX_INDEX_BIO, &new->ex_data,
-					&bio->ex_data))
-			goto err;
-
-		if (ret == NULL)
-			{
-			eoc=new;
-			ret=eoc;
-			}
-		else
-			{
-			BIO_push(eoc,new);
-			eoc=new;
-			}
-		}
-	return(ret);
-err:
-	if (ret != NULL)
-		BIO_free(ret);
-	return(NULL);	
-	}
-
-void BIO_copy_next_retry(BIO *b)
-	{
-	BIO_set_flags(b,BIO_get_retry_flags(b->next_bio));
-	b->retry_reason=b->next_bio->retry_reason;
-	}
-
-int BIO_get_ex_new_index(long argl, void *argp, CRYPTO_EX_new *new_func,
-	     CRYPTO_EX_dup *dup_func, CRYPTO_EX_free *free_func)
-	{
-	return CRYPTO_get_ex_new_index(CRYPTO_EX_INDEX_BIO, argl, argp,
-				new_func, dup_func, free_func);
-	}
-
-int BIO_set_ex_data(BIO *bio, int idx, void *data)
-	{
-	return(CRYPTO_set_ex_data(&(bio->ex_data),idx,data));
-	}
-
-void *BIO_get_ex_data(BIO *bio, int idx)
-	{
-	return(CRYPTO_get_ex_data(&(bio->ex_data),idx));
-	}
-
-unsigned long BIO_number_read(BIO *bio)
-{
-	if(bio) return bio->num_read;
-	return 0;
-}
-
-unsigned long BIO_number_written(BIO *bio)
-{
-	if(bio) return bio->num_write;
-	return 0;
-}
-
-IMPLEMENT_STACK_OF(BIO)
diff --git a/crypto/openssl/crypto/bio/bss_acpt.c b/crypto/openssl/crypto/bio/bss_acpt.c
deleted file mode 100644
index d090b7272fb6..000000000000
--- a/crypto/openssl/crypto/bio/bss_acpt.c
+++ /dev/null
@@ -1,479 +0,0 @@
-/* crypto/bio/bss_acpt.c */
-/* Copyright (C) 1995-1998 Eric Young (eay@cryptsoft.com)
- * All rights reserved.
- *
- * This package is an SSL implementation written
- * by Eric Young (eay@cryptsoft.com).
- * The implementation was written so as to conform with Netscapes SSL.
- * 
- * This library is free for commercial and non-commercial use as long as
- * the following conditions are aheared to.  The following conditions
- * apply to all code found in this distribution, be it the RC4, RSA,
- * lhash, DES, etc., code; not just the SSL code.  The SSL documentation
- * included with this distribution is covered by the same copyright terms
- * except that the holder is Tim Hudson (tjh@cryptsoft.com).
- * 
- * Copyright remains Eric Young's, and as such any Copyright notices in
- * the code are not to be removed.
- * If this package is used in a product, Eric Young should be given attribution
- * as the author of the parts of the library used.
- * This can be in the form of a textual message at program startup or
- * in documentation (online or textual) provided with the package.
- * 
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions
- * are met:
- * 1. Redistributions of source code must retain the copyright
- *    notice, this list of conditions and the following disclaimer.
- * 2. Redistributions in binary form must reproduce the above copyright
- *    notice, this list of conditions and the following disclaimer in the
- *    documentation and/or other materials provided with the distribution.
- * 3. All advertising materials mentioning features or use of this software
- *    must display the following acknowledgement:
- *    "This product includes cryptographic software written by
- *     Eric Young (eay@cryptsoft.com)"
- *    The word 'cryptographic' can be left out if the rouines from the library
- *    being used are not cryptographic related :-).
- * 4. If you include any Windows specific code (or a derivative thereof) from 
- *    the apps directory (application code) you must include an acknowledgement:
- *    "This product includes software written by Tim Hudson (tjh@cryptsoft.com)"
- * 
- * THIS SOFTWARE IS PROVIDED BY ERIC YOUNG ``AS IS'' AND
- * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
- * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
- * ARE DISCLAIMED.  IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE
- * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
- * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
- * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
- * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
- * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
- * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
- * SUCH DAMAGE.
- * 
- * The licence and distribution terms for any publically available version or
- * derivative of this code cannot be changed.  i.e. this code cannot simply be
- * copied and put under another distribution licence
- * [including the GNU Public Licence.]
- */
-
-#include <stdio.h>
-#include <errno.h>
-#define USE_SOCKETS
-#include "cryptlib.h"
-#include <openssl/bio.h>
-
-#ifndef OPENSSL_NO_SOCK
-
-#ifdef OPENSSL_SYS_WIN16
-#define SOCKET_PROTOCOL 0 /* more microsoft stupidity */
-#else
-#define SOCKET_PROTOCOL IPPROTO_TCP
-#endif
-
-#if (defined(OPENSSL_SYS_VMS) && __VMS_VER < 70000000)
-/* FIONBIO used as a switch to enable ioctl, and that isn't in VMS < 7.0 */
-#undef FIONBIO
-#endif
-
-typedef struct bio_accept_st
-	{
-	int state;
-	char *param_addr;
-
-	int accept_sock;
-	int accept_nbio;
-
-	char *addr;
-	int nbio;
-	/* If 0, it means normal, if 1, do a connect on bind failure,
-	 * and if there is no-one listening, bind with SO_REUSEADDR.
-	 * If 2, always use SO_REUSEADDR. */
-	int bind_mode;
-	BIO *bio_chain;
-	} BIO_ACCEPT;
-
-static int acpt_write(BIO *h, const char *buf, int num);
-static int acpt_read(BIO *h, char *buf, int size);
-static int acpt_puts(BIO *h, const char *str);
-static long acpt_ctrl(BIO *h, int cmd, long arg1, void *arg2);
-static int acpt_new(BIO *h);
-static int acpt_free(BIO *data);
-static int acpt_state(BIO *b, BIO_ACCEPT *c);
-static void acpt_close_socket(BIO *data);
-BIO_ACCEPT *BIO_ACCEPT_new(void );
-void BIO_ACCEPT_free(BIO_ACCEPT *a);
-
-#define ACPT_S_BEFORE			1
-#define ACPT_S_GET_ACCEPT_SOCKET	2
-#define ACPT_S_OK			3
-
-static BIO_METHOD methods_acceptp=
-	{
-	BIO_TYPE_ACCEPT,
-	"socket accept",
-	acpt_write,
-	acpt_read,
-	acpt_puts,
-	NULL, /* connect_gets, */
-	acpt_ctrl,
-	acpt_new,
-	acpt_free,
-	NULL,
-	};
-
-BIO_METHOD *BIO_s_accept(void)
-	{
-	return(&methods_acceptp);
-	}
-
-static int acpt_new(BIO *bi)
-	{
-	BIO_ACCEPT *ba;
-
-	bi->init=0;
-	bi->num=INVALID_SOCKET;
-	bi->flags=0;
-	if ((ba=BIO_ACCEPT_new()) == NULL)
-		return(0);
-	bi->ptr=(char *)ba;
-	ba->state=ACPT_S_BEFORE;
-	bi->shutdown=1;
-	return(1);
-	}
-
-BIO_ACCEPT *BIO_ACCEPT_new(void)
-	{
-	BIO_ACCEPT *ret;
-
-	if ((ret=(BIO_ACCEPT *)OPENSSL_malloc(sizeof(BIO_ACCEPT))) == NULL)
-		return(NULL);
-
-	memset(ret,0,sizeof(BIO_ACCEPT));
-	ret->accept_sock=INVALID_SOCKET;
-	ret->bind_mode=BIO_BIND_NORMAL;
-	return(ret);
-	}
-
-void BIO_ACCEPT_free(BIO_ACCEPT *a)
-	{
-	if(a == NULL)
-	    return;
-
-	if (a->param_addr != NULL) OPENSSL_free(a->param_addr);
-	if (a->addr != NULL) OPENSSL_free(a->addr);
-	if (a->bio_chain != NULL) BIO_free(a->bio_chain);
-	OPENSSL_free(a);
-	}
-
-static void acpt_close_socket(BIO *bio)
-	{
-	BIO_ACCEPT *c;
-
-	c=(BIO_ACCEPT *)bio->ptr;
-	if (c->accept_sock != INVALID_SOCKET)
-		{
-		shutdown(c->accept_sock,2);
-		closesocket(c->accept_sock);
-		c->accept_sock=INVALID_SOCKET;
-		bio->num=INVALID_SOCKET;
-		}
-	}
-
-static int acpt_free(BIO *a)
-	{
-	BIO_ACCEPT *data;
-
-	if (a == NULL) return(0);
-	data=(BIO_ACCEPT *)a->ptr;
-	 
-	if (a->shutdown)
-		{
-		acpt_close_socket(a);
-		BIO_ACCEPT_free(data);
-		a->ptr=NULL;
-		a->flags=0;
-		a->init=0;
-		}
-	return(1);
-	}
-	
-static int acpt_state(BIO *b, BIO_ACCEPT *c)
-	{
-	BIO *bio=NULL,*dbio;
-	int s= -1;
-	int i;
-
-again:
-	switch (c->state)
-		{
-	case ACPT_S_BEFORE:
-		if (c->param_addr == NULL)
-			{
-			BIOerr(BIO_F_ACPT_STATE,BIO_R_NO_ACCEPT_PORT_SPECIFIED);
-			return(-1);
-			}
-		s=BIO_get_accept_socket(c->param_addr,c->bind_mode);
-		if (s == INVALID_SOCKET)
-			return(-1);
-
-		if (c->accept_nbio)
-			{
-			if (!BIO_socket_nbio(s,1))
-				{
-				closesocket(s);
-				BIOerr(BIO_F_ACPT_STATE,BIO_R_ERROR_SETTING_NBIO_ON_ACCEPT_SOCKET);
-				return(-1);
-				}
-			}
-		c->accept_sock=s;
-		b->num=s;
-		c->state=ACPT_S_GET_ACCEPT_SOCKET;
-		return(1);
-		/* break; */
-	case ACPT_S_GET_ACCEPT_SOCKET:
-		if (b->next_bio != NULL)
-			{
-			c->state=ACPT_S_OK;
-			goto again;
-			}
-		BIO_clear_retry_flags(b);
-		b->retry_reason=0;
-		i=BIO_accept(c->accept_sock,&(c->addr));
-
-		/* -2 return means we should retry */
-		if(i == -2)
-			{
-			BIO_set_retry_special(b);
-			b->retry_reason=BIO_RR_ACCEPT;
-			return -1;
-			}
-
-		if (i < 0) return(i);
-
-		bio=BIO_new_socket(i,BIO_CLOSE);
-		if (bio == NULL) goto err;
-
-		BIO_set_callback(bio,BIO_get_callback(b));
-		BIO_set_callback_arg(bio,BIO_get_callback_arg(b));
-
-		if (c->nbio)
-			{
-			if (!BIO_socket_nbio(i,1))
-				{
-				BIOerr(BIO_F_ACPT_STATE,BIO_R_ERROR_SETTING_NBIO_ON_ACCEPTED_SOCKET);
-				goto err;
-				}
-			}
-
-		/* If the accept BIO has an bio_chain, we dup it and
-		 * put the new socket at the end. */
-		if (c->bio_chain != NULL)
-			{
-			if ((dbio=BIO_dup_chain(c->bio_chain)) == NULL)
-				goto err;
-			if (!BIO_push(dbio,bio)) goto err;
-			bio=dbio;
-			}
-		if (BIO_push(b,bio) == NULL) goto err;
-
-		c->state=ACPT_S_OK;
-		return(1);
-err:
-		if (bio != NULL)
-			BIO_free(bio);
-		else if (s >= 0)
-			closesocket(s);
-		return(0);
-		/* break; */
-	case ACPT_S_OK:
-		if (b->next_bio == NULL)
-			{
-			c->state=ACPT_S_GET_ACCEPT_SOCKET;
-			goto again;
-			}
-		return(1);
-		/* break; */
-	default:	
-		return(0);
-		/* break; */
-		}
-
-	}
-
-static int acpt_read(BIO *b, char *out, int outl)
-	{
-	int ret=0;
-	BIO_ACCEPT *data;
-
-	BIO_clear_retry_flags(b);
-	data=(BIO_ACCEPT *)b->ptr;
-
-	while (b->next_bio == NULL)
-		{
-		ret=acpt_state(b,data);
-		if (ret <= 0) return(ret);
-		}
-
-	ret=BIO_read(b->next_bio,out,outl);
-	BIO_copy_next_retry(b);
-	return(ret);
-	}
-
-static int acpt_write(BIO *b, const char *in, int inl)
-	{
-	int ret;
-	BIO_ACCEPT *data;
-
-	BIO_clear_retry_flags(b);
-	data=(BIO_ACCEPT *)b->ptr;
-
-	while (b->next_bio == NULL)
-		{
-		ret=acpt_state(b,data);
-		if (ret <= 0) return(ret);
-		}
-
-	ret=BIO_write(b->next_bio,in,inl);
-	BIO_copy_next_retry(b);
-	return(ret);
-	}
-
-static long acpt_ctrl(BIO *b, int cmd, long num, void *ptr)
-	{
-	BIO *dbio;
-	int *ip;
-	long ret=1;
-	BIO_ACCEPT *data;
-	char **pp;
-
-	data=(BIO_ACCEPT *)b->ptr;
-
-	switch (cmd)
-		{
-	case BIO_CTRL_RESET:
-		ret=0;
-		data->state=ACPT_S_BEFORE;
-		acpt_close_socket(b);
-		b->flags=0;
-		break;
-	case BIO_C_DO_STATE_MACHINE:
-		/* use this one to start the connection */
-		ret=(long)acpt_state(b,data);
-		break;
-	case BIO_C_SET_ACCEPT:
-		if (ptr != NULL)
-			{
-			if (num == 0)
-				{
-				b->init=1;
-				if (data->param_addr != NULL)
-					OPENSSL_free(data->param_addr);
-				data->param_addr=BUF_strdup(ptr);
-				}
-			else if (num == 1)
-				{
-				data->accept_nbio=(ptr != NULL);
-				}
-			else if (num == 2)
-				{
-				if (data->bio_chain != NULL)
-					BIO_free(data->bio_chain);
-				data->bio_chain=(BIO *)ptr;
-				}
-			}
-		break;
-	case BIO_C_SET_NBIO:
-		data->nbio=(int)num;
-		break;
-	case BIO_C_SET_FD:
-		b->init=1;
-		b->num= *((int *)ptr);
-		data->accept_sock=b->num;
-		data->state=ACPT_S_GET_ACCEPT_SOCKET;
-		b->shutdown=(int)num;
-		b->init=1;
-		break;
-	case BIO_C_GET_FD:
-		if (b->init)
-			{
-			ip=(int *)ptr;
-			if (ip != NULL)
-				*ip=data->accept_sock;
-			ret=data->accept_sock;
-			}
-		else
-			ret= -1;
-		break;
-	case BIO_C_GET_ACCEPT:
-		if (b->init)
-			{
-			if (ptr != NULL)
-				{
-				pp=(char **)ptr;
-				*pp=data->param_addr;
-				}
-			else
-				ret= -1;
-			}
-		else
-			ret= -1;
-		break;
-	case BIO_CTRL_GET_CLOSE:
-		ret=b->shutdown;
-		break;
-	case BIO_CTRL_SET_CLOSE:
-		b->shutdown=(int)num;
-		break;
-	case BIO_CTRL_PENDING:
-	case BIO_CTRL_WPENDING:
-		ret=0;
-		break;
-	case BIO_CTRL_FLUSH:
-		break;
-	case BIO_C_SET_BIND_MODE:
-		data->bind_mode=(int)num;
-		break;
-	case BIO_C_GET_BIND_MODE:
-		ret=(long)data->bind_mode;
-		break;
-	case BIO_CTRL_DUP:
-		dbio=(BIO *)ptr;
-/*		if (data->param_port) EAY EAY
-			BIO_set_port(dbio,data->param_port);
-		if (data->param_hostname)
-			BIO_set_hostname(dbio,data->param_hostname);
-		BIO_set_nbio(dbio,data->nbio); */
-		break;
-
-	default:
-		ret=0;
-		break;
-		}
-	return(ret);
-	}
-
-static int acpt_puts(BIO *bp, const char *str)
-	{
-	int n,ret;
-
-	n=strlen(str);
-	ret=acpt_write(bp,str,n);
-	return(ret);
-	}
-
-BIO *BIO_new_accept(char *str)
-	{
-	BIO *ret;
-
-	ret=BIO_new(BIO_s_accept());
-	if (ret == NULL) return(NULL);
-	if (BIO_set_accept_port(ret,str))
-		return(ret);
-	else
-		{
-		BIO_free(ret);
-		return(NULL);
-		}
-	}
-
-#endif
diff --git a/crypto/openssl/crypto/bio/bss_bio.c b/crypto/openssl/crypto/bio/bss_bio.c
deleted file mode 100644
index 0f9f0955b411..000000000000
--- a/crypto/openssl/crypto/bio/bss_bio.c
+++ /dev/null
@@ -1,924 +0,0 @@
-/* crypto/bio/bss_bio.c  -*- Mode: C; c-file-style: "eay" -*- */
-/* ====================================================================
- * Copyright (c) 1998-2003 The OpenSSL Project.  All rights reserved.
- *
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions
- * are met:
- *
- * 1. Redistributions of source code must retain the above copyright
- *    notice, this list of conditions and the following disclaimer. 
- *
- * 2. Redistributions in binary form must reproduce the above copyright
- *    notice, this list of conditions and the following disclaimer in
- *    the documentation and/or other materials provided with the
- *    distribution.
- *
- * 3. All advertising materials mentioning features or use of this
- *    software must display the following acknowledgment:
- *    "This product includes software developed by the OpenSSL Project
- *    for use in the OpenSSL Toolkit. (http://www.openssl.org/)"
- *
- * 4. The names "OpenSSL Toolkit" and "OpenSSL Project" must not be used to
- *    endorse or promote products derived from this software without
- *    prior written permission. For written permission, please contact
- *    openssl-core@openssl.org.
- *
- * 5. Products derived from this software may not be called "OpenSSL"
- *    nor may "OpenSSL" appear in their names without prior written
- *    permission of the OpenSSL Project.
- *
- * 6. Redistributions of any form whatsoever must retain the following
- *    acknowledgment:
- *    "This product includes software developed by the OpenSSL Project
- *    for use in the OpenSSL Toolkit (http://www.openssl.org/)"
- *
- * THIS SOFTWARE IS PROVIDED BY THE OpenSSL PROJECT ``AS IS'' AND ANY
- * EXPRESSED OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
- * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR
- * PURPOSE ARE DISCLAIMED.  IN NO EVENT SHALL THE OpenSSL PROJECT OR
- * ITS CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
- * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
- * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
- * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
- * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
- * STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
- * ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED
- * OF THE POSSIBILITY OF SUCH DAMAGE.
- * ====================================================================
- *
- * This product includes cryptographic software written by Eric Young
- * (eay@cryptsoft.com).  This product includes software written by Tim
- * Hudson (tjh@cryptsoft.com).
- *
- */
-
-/* Special method for a BIO where the other endpoint is also a BIO
- * of this kind, handled by the same thread (i.e. the "peer" is actually
- * ourselves, wearing a different hat).
- * Such "BIO pairs" are mainly for using the SSL library with I/O interfaces
- * for which no specific BIO method is available.
- * See ssl/ssltest.c for some hints on how this can be used. */
-
-/* BIO_DEBUG implies BIO_PAIR_DEBUG */
-#ifdef BIO_DEBUG
-# ifndef BIO_PAIR_DEBUG
-#  define BIO_PAIR_DEBUG
-# endif
-#endif
-
-/* disable assert() unless BIO_PAIR_DEBUG has been defined */
-#ifndef BIO_PAIR_DEBUG
-# ifndef NDEBUG
-#  define NDEBUG
-# endif
-#endif
-
-#include <assert.h>
-#include <limits.h>
-#include <stdlib.h>
-#include <string.h>
-
-#include <openssl/bio.h>
-#include <openssl/err.h>
-#include <openssl/crypto.h>
-
-#include "e_os.h"
-
-/* VxWorks defines SSIZE_MAX with an empty value causing compile errors */
-#if defined(OPENSSL_SYS_VXWORKS)
-# undef SSIZE_MAX
-#endif
-#ifndef SSIZE_MAX
-# define SSIZE_MAX INT_MAX
-#endif
-
-static int bio_new(BIO *bio);
-static int bio_free(BIO *bio);
-static int bio_read(BIO *bio, char *buf, int size);
-static int bio_write(BIO *bio, const char *buf, int num);
-static long bio_ctrl(BIO *bio, int cmd, long num, void *ptr);
-static int bio_puts(BIO *bio, const char *str);
-
-static int bio_make_pair(BIO *bio1, BIO *bio2);
-static void bio_destroy_pair(BIO *bio);
-
-static BIO_METHOD methods_biop =
-{
-	BIO_TYPE_BIO,
-	"BIO pair",
-	bio_write,
-	bio_read,
-	bio_puts,
-	NULL /* no bio_gets */,
-	bio_ctrl,
-	bio_new,
-	bio_free,
-	NULL /* no bio_callback_ctrl */
-};
-
-BIO_METHOD *BIO_s_bio(void)
-	{
-	return &methods_biop;
-	}
-
-struct bio_bio_st
-{
-	BIO *peer;     /* NULL if buf == NULL.
-	                * If peer != NULL, then peer->ptr is also a bio_bio_st,
-	                * and its "peer" member points back to us.
-	                * peer != NULL iff init != 0 in the BIO. */
-	
-	/* This is for what we write (i.e. reading uses peer's struct): */
-	int closed;     /* valid iff peer != NULL */
-	size_t len;     /* valid iff buf != NULL; 0 if peer == NULL */
-	size_t offset;  /* valid iff buf != NULL; 0 if len == 0 */
-	size_t size;
-	char *buf;      /* "size" elements (if != NULL) */
-
-	size_t request; /* valid iff peer != NULL; 0 if len != 0,
-	                 * otherwise set by peer to number of bytes
-	                 * it (unsuccessfully) tried to read,
-	                 * never more than buffer space (size-len) warrants. */
-};
-
-static int bio_new(BIO *bio)
-	{
-	struct bio_bio_st *b;
-	
-	b = OPENSSL_malloc(sizeof *b);
-	if (b == NULL)
-		return 0;
-
-	b->peer = NULL;
-	b->size = 17*1024; /* enough for one TLS record (just a default) */
-	b->buf = NULL;
-
-	bio->ptr = b;
-	return 1;
-	}
-
-
-static int bio_free(BIO *bio)
-	{
-	struct bio_bio_st *b;
-
-	if (bio == NULL)
-		return 0;
-	b = bio->ptr;
-
-	assert(b != NULL);
-
-	if (b->peer)
-		bio_destroy_pair(bio);
-	
-	if (b->buf != NULL)
-		{
-		OPENSSL_free(b->buf);
-		}
-
-	OPENSSL_free(b);
-
-	return 1;
-	}
-
-
-
-static int bio_read(BIO *bio, char *buf, int size_)
-	{
-	size_t size = size_;
-	size_t rest;
-	struct bio_bio_st *b, *peer_b;
-
-	BIO_clear_retry_flags(bio);
-
-	if (!bio->init)
-		return 0;
-
-	b = bio->ptr;
-	assert(b != NULL);
-	assert(b->peer != NULL);
-	peer_b = b->peer->ptr;
-	assert(peer_b != NULL);
-	assert(peer_b->buf != NULL);
-
-	peer_b->request = 0; /* will be set in "retry_read" situation */
-
-	if (buf == NULL || size == 0)
-		return 0;
-
-	if (peer_b->len == 0)
-		{
-		if (peer_b->closed)
-			return 0; /* writer has closed, and no data is left */
-		else
-			{
-			BIO_set_retry_read(bio); /* buffer is empty */
-			if (size <= peer_b->size)
-				peer_b->request = size;
-			else
-				/* don't ask for more than the peer can
-				 * deliver in one write */
-				peer_b->request = peer_b->size;
-			return -1;
-			}
-		}
-
-	/* we can read */
-	if (peer_b->len < size)
-		size = peer_b->len;
-
-	/* now read "size" bytes */
-	
-	rest = size;
-	
-	assert(rest > 0);
-	do /* one or two iterations */
-		{
-		size_t chunk;
-		
-		assert(rest <= peer_b->len);
-		if (peer_b->offset + rest <= peer_b->size)
-			chunk = rest;
-		else
-			/* wrap around ring buffer */
-			chunk = peer_b->size - peer_b->offset;
-		assert(peer_b->offset + chunk <= peer_b->size);
-		
-		memcpy(buf, peer_b->buf + peer_b->offset, chunk);
-		
-		peer_b->len -= chunk;
-		if (peer_b->len)
-			{
-			peer_b->offset += chunk;
-			assert(peer_b->offset <= peer_b->size);
-			if (peer_b->offset == peer_b->size)
-				peer_b->offset = 0;
-			buf += chunk;
-			}
-		else
-			{
-			/* buffer now empty, no need to advance "buf" */
-			assert(chunk == rest);
-			peer_b->offset = 0;
-			}
-		rest -= chunk;
-		}
-	while (rest);
-	
-	return size;
-	}
-
-/* non-copying interface: provide pointer to available data in buffer
- *    bio_nread0:  return number of available bytes
- *    bio_nread:   also advance index
- * (example usage:  bio_nread0(), read from buffer, bio_nread()
- *  or just         bio_nread(), read from buffer)
- */
-/* WARNING: The non-copying interface is largely untested as of yet
- * and may contain bugs. */
-static ssize_t bio_nread0(BIO *bio, char **buf)
-	{
-	struct bio_bio_st *b, *peer_b;
-	ssize_t num;
-	
-	BIO_clear_retry_flags(bio);
-
-	if (!bio->init)
-		return 0;
-	
-	b = bio->ptr;
-	assert(b != NULL);
-	assert(b->peer != NULL);
-	peer_b = b->peer->ptr;
-	assert(peer_b != NULL);
-	assert(peer_b->buf != NULL);
-	
-	peer_b->request = 0;
-	
-	if (peer_b->len == 0)
-		{
-		char dummy;
-		
-		/* avoid code duplication -- nothing available for reading */
-		return bio_read(bio, &dummy, 1); /* returns 0 or -1 */
-		}
-
-	num = peer_b->len;
-	if (peer_b->size < peer_b->offset + num)
-		/* no ring buffer wrap-around for non-copying interface */
-		num = peer_b->size - peer_b->offset;
-	assert(num > 0);
-
-	if (buf != NULL)
-		*buf = peer_b->buf + peer_b->offset;
-	return num;
-	}
-
-static ssize_t bio_nread(BIO *bio, char **buf, size_t num_)
-	{
-	struct bio_bio_st *b, *peer_b;
-	ssize_t num, available;
-
-	if (num_ > SSIZE_MAX)
-		num = SSIZE_MAX;
-	else
-		num = (ssize_t)num_;
-
-	available = bio_nread0(bio, buf);
-	if (num > available)
-		num = available;
-	if (num <= 0)
-		return num;
-
-	b = bio->ptr;
-	peer_b = b->peer->ptr;
-
-	peer_b->len -= num;
-	if (peer_b->len) 
-		{
-		peer_b->offset += num;
-		assert(peer_b->offset <= peer_b->size);
-		if (peer_b->offset == peer_b->size)
-			peer_b->offset = 0;
-		}
-	else
-		peer_b->offset = 0;
-
-	return num;
-	}
-
-
-static int bio_write(BIO *bio, const char *buf, int num_)
-	{
-	size_t num = num_;
-	size_t rest;
-	struct bio_bio_st *b;
-
-	BIO_clear_retry_flags(bio);
-
-	if (!bio->init || buf == NULL || num == 0)
-		return 0;
-
-	b = bio->ptr;		
-	assert(b != NULL);
-	assert(b->peer != NULL);
-	assert(b->buf != NULL);
-
-	b->request = 0;
-	if (b->closed)
-		{
-		/* we already closed */
-		BIOerr(BIO_F_BIO_WRITE, BIO_R_BROKEN_PIPE);
-		return -1;
-		}
-
-	assert(b->len <= b->size);
-
-	if (b->len == b->size)
-		{
-		BIO_set_retry_write(bio); /* buffer is full */
-		return -1;
-		}
-
-	/* we can write */
-	if (num > b->size - b->len)
-		num = b->size - b->len;
-	
-	/* now write "num" bytes */
-
-	rest = num;
-	
-	assert(rest > 0);
-	do /* one or two iterations */
-		{
-		size_t write_offset;
-		size_t chunk;
-
-		assert(b->len + rest <= b->size);
-
-		write_offset = b->offset + b->len;
-		if (write_offset >= b->size)
-			write_offset -= b->size;
-		/* b->buf[write_offset] is the first byte we can write to. */
-
-		if (write_offset + rest <= b->size)
-			chunk = rest;
-		else
-			/* wrap around ring buffer */
-			chunk = b->size - write_offset;
-		
-		memcpy(b->buf + write_offset, buf, chunk);
-		
-		b->len += chunk;
-
-		assert(b->len <= b->size);
-		
-		rest -= chunk;
-		buf += chunk;
-		}
-	while (rest);
-
-	return num;
-	}
-
-/* non-copying interface: provide pointer to region to write to
- *   bio_nwrite0:  check how much space is available
- *   bio_nwrite:   also increase length
- * (example usage:  bio_nwrite0(), write to buffer, bio_nwrite()
- *  or just         bio_nwrite(), write to buffer)
- */
-static ssize_t bio_nwrite0(BIO *bio, char **buf)
-	{
-	struct bio_bio_st *b;
-	size_t num;
-	size_t write_offset;
-
-	BIO_clear_retry_flags(bio);
-
-	if (!bio->init)
-		return 0;
-
-	b = bio->ptr;		
-	assert(b != NULL);
-	assert(b->peer != NULL);
-	assert(b->buf != NULL);
-
-	b->request = 0;
-	if (b->closed)
-		{
-		BIOerr(BIO_F_BIO_NWRITE0, BIO_R_BROKEN_PIPE);
-		return -1;
-		}
-
-	assert(b->len <= b->size);
-
-	if (b->len == b->size)
-		{
-		BIO_set_retry_write(bio);
-		return -1;
-		}
-
-	num = b->size - b->len;
-	write_offset = b->offset + b->len;
-	if (write_offset >= b->size)
-		write_offset -= b->size;
-	if (write_offset + num > b->size)
-		/* no ring buffer wrap-around for non-copying interface
-		 * (to fulfil the promise by BIO_ctrl_get_write_guarantee,
-		 * BIO_nwrite may have to be called twice) */
-		num = b->size - write_offset;
-
-	if (buf != NULL)
-		*buf = b->buf + write_offset;
-	assert(write_offset + num <= b->size);
-
-	return num;
-	}
-
-static ssize_t bio_nwrite(BIO *bio, char **buf, size_t num_)
-	{
-	struct bio_bio_st *b;
-	ssize_t num, space;
-
-	if (num_ > SSIZE_MAX)
-		num = SSIZE_MAX;
-	else
-		num = (ssize_t)num_;
-
-	space = bio_nwrite0(bio, buf);
-	if (num > space)
-		num = space;
-	if (num <= 0)
-		return num;
-	b = bio->ptr;
-	assert(b != NULL);
-	b->len += num;
-	assert(b->len <= b->size);
-
-	return num;
-	}
-
-
-static long bio_ctrl(BIO *bio, int cmd, long num, void *ptr)
-	{
-	long ret;
-	struct bio_bio_st *b = bio->ptr;
-	
-	assert(b != NULL);
-
-	switch (cmd)
-		{
-	/* specific CTRL codes */
-
-	case BIO_C_SET_WRITE_BUF_SIZE:
-		if (b->peer)
-			{
-			BIOerr(BIO_F_BIO_CTRL, BIO_R_IN_USE);
-			ret = 0;
-			}
-		else if (num == 0)
-			{
-			BIOerr(BIO_F_BIO_CTRL, BIO_R_INVALID_ARGUMENT);
-			ret = 0;
-			}
-		else
-			{
-			size_t new_size = num;
-
-			if (b->size != new_size)
-				{
-				if (b->buf) 
-					{
-					OPENSSL_free(b->buf);
-					b->buf = NULL;
-					}
-				b->size = new_size;
-				}
-			ret = 1;
-			}
-		break;
-
-	case BIO_C_GET_WRITE_BUF_SIZE:
-		ret = (long) b->size;
-		break;
-
-	case BIO_C_MAKE_BIO_PAIR:
-		{
-		BIO *other_bio = ptr;
-		
-		if (bio_make_pair(bio, other_bio))
-			ret = 1;
-		else
-			ret = 0;
-		}
-		break;
-		
-	case BIO_C_DESTROY_BIO_PAIR:
-		/* Affects both BIOs in the pair -- call just once!
-		 * Or let BIO_free(bio1); BIO_free(bio2); do the job. */
-		bio_destroy_pair(bio);
-		ret = 1;
-		break;
-
-	case BIO_C_GET_WRITE_GUARANTEE:
-		/* How many bytes can the caller feed to the next write
-		 * without having to keep any? */
-		if (b->peer == NULL || b->closed)
-			ret = 0;
-		else
-			ret = (long) b->size - b->len;
-		break;
-
-	case BIO_C_GET_READ_REQUEST:
-		/* If the peer unsuccessfully tried to read, how many bytes
-		 * were requested?  (As with BIO_CTRL_PENDING, that number
-		 * can usually be treated as boolean.) */
-		ret = (long) b->request;
-		break;
-
-	case BIO_C_RESET_READ_REQUEST:
-		/* Reset request.  (Can be useful after read attempts
-		 * at the other side that are meant to be non-blocking,
-		 * e.g. when probing SSL_read to see if any data is
-		 * available.) */
-		b->request = 0;
-		ret = 1;
-		break;
-
-	case BIO_C_SHUTDOWN_WR:
-		/* similar to shutdown(..., SHUT_WR) */
-		b->closed = 1;
-		ret = 1;
-		break;
-
-	case BIO_C_NREAD0:
-		/* prepare for non-copying read */
-		ret = (long) bio_nread0(bio, ptr);
-		break;
-		
-	case BIO_C_NREAD:
-		/* non-copying read */
-		ret = (long) bio_nread(bio, ptr, (size_t) num);
-		break;
-		
-	case BIO_C_NWRITE0:
-		/* prepare for non-copying write */
-		ret = (long) bio_nwrite0(bio, ptr);
-		break;
-
-	case BIO_C_NWRITE:
-		/* non-copying write */
-		ret = (long) bio_nwrite(bio, ptr, (size_t) num);
-		break;
-		
-
-	/* standard CTRL codes follow */
-
-	case BIO_CTRL_RESET:
-		if (b->buf != NULL)
-			{
-			b->len = 0;
-			b->offset = 0;
-			}
-		ret = 0;
-		break;		
-
-	case BIO_CTRL_GET_CLOSE:
-		ret = bio->shutdown;
-		break;
-
-	case BIO_CTRL_SET_CLOSE:
-		bio->shutdown = (int) num;
-		ret = 1;
-		break;
-
-	case BIO_CTRL_PENDING:
-		if (b->peer != NULL)
-			{
-			struct bio_bio_st *peer_b = b->peer->ptr;
-			
-			ret = (long) peer_b->len;
-			}
-		else
-			ret = 0;
-		break;
-
-	case BIO_CTRL_WPENDING:
-		if (b->buf != NULL)
-			ret = (long) b->len;
-		else
-			ret = 0;
-		break;
-
-	case BIO_CTRL_DUP:
-		/* See BIO_dup_chain for circumstances we have to expect. */
-		{
-		BIO *other_bio = ptr;
-		struct bio_bio_st *other_b;
-		
-		assert(other_bio != NULL);
-		other_b = other_bio->ptr;
-		assert(other_b != NULL);
-		
-		assert(other_b->buf == NULL); /* other_bio is always fresh */
-
-		other_b->size = b->size;
-		}
-
-		ret = 1;
-		break;
-
-	case BIO_CTRL_FLUSH:
-		ret = 1;
-		break;
-
-	case BIO_CTRL_EOF:
-		{
-		BIO *other_bio = ptr;
-		
-		if (other_bio)
-			{
-			struct bio_bio_st *other_b = other_bio->ptr;
-			
-			assert(other_b != NULL);
-			ret = other_b->len == 0 && other_b->closed;
-			}
-		else
-			ret = 1;
-		}
-		break;
-
-	default:
-		ret = 0;
-		}
-	return ret;
-	}
-
-static int bio_puts(BIO *bio, const char *str)
-	{
-	return bio_write(bio, str, strlen(str));
-	}
-
-
-static int bio_make_pair(BIO *bio1, BIO *bio2)
-	{
-	struct bio_bio_st *b1, *b2;
-
-	assert(bio1 != NULL);
-	assert(bio2 != NULL);
-
-	b1 = bio1->ptr;
-	b2 = bio2->ptr;
-	
-	if (b1->peer != NULL || b2->peer != NULL)
-		{
-		BIOerr(BIO_F_BIO_MAKE_PAIR, BIO_R_IN_USE);
-		return 0;
-		}
-	
-	if (b1->buf == NULL)
-		{
-		b1->buf = OPENSSL_malloc(b1->size);
-		if (b1->buf == NULL)
-			{
-			BIOerr(BIO_F_BIO_MAKE_PAIR, ERR_R_MALLOC_FAILURE);
-			return 0;
-			}
-		b1->len = 0;
-		b1->offset = 0;
-		}
-	
-	if (b2->buf == NULL)
-		{
-		b2->buf = OPENSSL_malloc(b2->size);
-		if (b2->buf == NULL)
-			{
-			BIOerr(BIO_F_BIO_MAKE_PAIR, ERR_R_MALLOC_FAILURE);
-			return 0;
-			}
-		b2->len = 0;
-		b2->offset = 0;
-		}
-	
-	b1->peer = bio2;
-	b1->closed = 0;
-	b1->request = 0;
-	b2->peer = bio1;
-	b2->closed = 0;
-	b2->request = 0;
-
-	bio1->init = 1;
-	bio2->init = 1;
-
-	return 1;
-	}
-
-static void bio_destroy_pair(BIO *bio)
-	{
-	struct bio_bio_st *b = bio->ptr;
-
-	if (b != NULL)
-		{
-		BIO *peer_bio = b->peer;
-
-		if (peer_bio != NULL)
-			{
-			struct bio_bio_st *peer_b = peer_bio->ptr;
-
-			assert(peer_b != NULL);
-			assert(peer_b->peer == bio);
-
-			peer_b->peer = NULL;
-			peer_bio->init = 0;
-			assert(peer_b->buf != NULL);
-			peer_b->len = 0;
-			peer_b->offset = 0;
-			
-			b->peer = NULL;
-			bio->init = 0;
-			assert(b->buf != NULL);
-			b->len = 0;
-			b->offset = 0;
-			}
-		}
-	}
- 
-
-/* Exported convenience functions */
-int BIO_new_bio_pair(BIO **bio1_p, size_t writebuf1,
-	BIO **bio2_p, size_t writebuf2)
-	 {
-	 BIO *bio1 = NULL, *bio2 = NULL;
-	 long r;
-	 int ret = 0;
-
-	 bio1 = BIO_new(BIO_s_bio());
-	 if (bio1 == NULL)
-		 goto err;
-	 bio2 = BIO_new(BIO_s_bio());
-	 if (bio2 == NULL)
-		 goto err;
-
-	 if (writebuf1)
-		 {
-		 r = BIO_set_write_buf_size(bio1, writebuf1);
-		 if (!r)
-			 goto err;
-		 }
-	 if (writebuf2)
-		 {
-		 r = BIO_set_write_buf_size(bio2, writebuf2);
-		 if (!r)
-			 goto err;
-		 }
-
-	 r = BIO_make_bio_pair(bio1, bio2);
-	 if (!r)
-		 goto err;
-	 ret = 1;
-
- err:
-	 if (ret == 0)
-		 {
-		 if (bio1)
-			 {
-			 BIO_free(bio1);
-			 bio1 = NULL;
-			 }
-		 if (bio2)
-			 {
-			 BIO_free(bio2);
-			 bio2 = NULL;
-			 }
-		 }
-
-	 *bio1_p = bio1;
-	 *bio2_p = bio2;
-	 return ret;
-	 }
-
-size_t BIO_ctrl_get_write_guarantee(BIO *bio)
-	{
-	return BIO_ctrl(bio, BIO_C_GET_WRITE_GUARANTEE, 0, NULL);
-	}
-
-size_t BIO_ctrl_get_read_request(BIO *bio)
-	{
-	return BIO_ctrl(bio, BIO_C_GET_READ_REQUEST, 0, NULL);
-	}
-
-int BIO_ctrl_reset_read_request(BIO *bio)
-	{
-	return (BIO_ctrl(bio, BIO_C_RESET_READ_REQUEST, 0, NULL) != 0);
-	}
-
-
-/* BIO_nread0/nread/nwrite0/nwrite are available only for BIO pairs for now
- * (conceivably some other BIOs could allow non-copying reads and writes too.)
- */
-int BIO_nread0(BIO *bio, char **buf)
-	{
-	long ret;
-
-	if (!bio->init)
-		{
-		BIOerr(BIO_F_BIO_NREAD0, BIO_R_UNINITIALIZED);
-		return -2;
-		}
-
-	ret = BIO_ctrl(bio, BIO_C_NREAD0, 0, buf);
-	if (ret > INT_MAX)
-		return INT_MAX;
-	else
-		return (int) ret;
-	}
-
-int BIO_nread(BIO *bio, char **buf, int num)
-	{
-	int ret;
-
-	if (!bio->init)
-		{
-		BIOerr(BIO_F_BIO_NREAD, BIO_R_UNINITIALIZED);
-		return -2;
-		}
-
-	ret = (int) BIO_ctrl(bio, BIO_C_NREAD, num, buf);
-	if (ret > 0)
-		bio->num_read += ret;
-	return ret;
-	}
-
-int BIO_nwrite0(BIO *bio, char **buf)
-	{
-	long ret;
-
-	if (!bio->init)
-		{
-		BIOerr(BIO_F_BIO_NWRITE0, BIO_R_UNINITIALIZED);
-		return -2;
-		}
-
-	ret = BIO_ctrl(bio, BIO_C_NWRITE0, 0, buf);
-	if (ret > INT_MAX)
-		return INT_MAX;
-	else
-		return (int) ret;
-	}
-
-int BIO_nwrite(BIO *bio, char **buf, int num)
-	{
-	int ret;
-
-	if (!bio->init)
-		{
-		BIOerr(BIO_F_BIO_NWRITE, BIO_R_UNINITIALIZED);
-		return -2;
-		}
-
-	ret = BIO_ctrl(bio, BIO_C_NWRITE, num, buf);
-	if (ret > 0)
-		bio->num_read += ret;
-	return ret;
-	}
diff --git a/crypto/openssl/crypto/bio/bss_conn.c b/crypto/openssl/crypto/bio/bss_conn.c
deleted file mode 100644
index c14727855b25..000000000000
--- a/crypto/openssl/crypto/bio/bss_conn.c
+++ /dev/null
@@ -1,652 +0,0 @@
-/* crypto/bio/bss_conn.c */
-/* Copyright (C) 1995-1998 Eric Young (eay@cryptsoft.com)
- * All rights reserved.
- *
- * This package is an SSL implementation written
- * by Eric Young (eay@cryptsoft.com).
- * The implementation was written so as to conform with Netscapes SSL.
- * 
- * This library is free for commercial and non-commercial use as long as
- * the following conditions are aheared to.  The following conditions
- * apply to all code found in this distribution, be it the RC4, RSA,
- * lhash, DES, etc., code; not just the SSL code.  The SSL documentation
- * included with this distribution is covered by the same copyright terms
- * except that the holder is Tim Hudson (tjh@cryptsoft.com).
- * 
- * Copyright remains Eric Young's, and as such any Copyright notices in
- * the code are not to be removed.
- * If this package is used in a product, Eric Young should be given attribution
- * as the author of the parts of the library used.
- * This can be in the form of a textual message at program startup or
- * in documentation (online or textual) provided with the package.
- * 
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions
- * are met:
- * 1. Redistributions of source code must retain the copyright
- *    notice, this list of conditions and the following disclaimer.
- * 2. Redistributions in binary form must reproduce the above copyright
- *    notice, this list of conditions and the following disclaimer in the
- *    documentation and/or other materials provided with the distribution.
- * 3. All advertising materials mentioning features or use of this software
- *    must display the following acknowledgement:
- *    "This product includes cryptographic software written by
- *     Eric Young (eay@cryptsoft.com)"
- *    The word 'cryptographic' can be left out if the rouines from the library
- *    being used are not cryptographic related :-).
- * 4. If you include any Windows specific code (or a derivative thereof) from 
- *    the apps directory (application code) you must include an acknowledgement:
- *    "This product includes software written by Tim Hudson (tjh@cryptsoft.com)"
- * 
- * THIS SOFTWARE IS PROVIDED BY ERIC YOUNG ``AS IS'' AND
- * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
- * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
- * ARE DISCLAIMED.  IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE
- * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
- * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
- * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
- * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
- * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
- * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
- * SUCH DAMAGE.
- * 
- * The licence and distribution terms for any publically available version or
- * derivative of this code cannot be changed.  i.e. this code cannot simply be
- * copied and put under another distribution licence
- * [including the GNU Public Licence.]
- */
-
-#include <stdio.h>
-#include <errno.h>
-#define USE_SOCKETS
-#include "cryptlib.h"
-#include <openssl/bio.h>
-
-#ifndef OPENSSL_NO_SOCK
-
-#ifdef OPENSSL_SYS_WIN16
-#define SOCKET_PROTOCOL 0 /* more microsoft stupidity */
-#else
-#define SOCKET_PROTOCOL IPPROTO_TCP
-#endif
-
-#if (defined(OPENSSL_SYS_VMS) && __VMS_VER < 70000000)
-/* FIONBIO used as a switch to enable ioctl, and that isn't in VMS < 7.0 */
-#undef FIONBIO
-#endif
-
-
-typedef struct bio_connect_st
-	{
-	int state;
-
-	char *param_hostname;
-	char *param_port;
-	int nbio;
-
-	unsigned char ip[4];
-	unsigned short port;
-
-	struct sockaddr_in them;
-
-	/* int socket; this will be kept in bio->num so that it is
-	 * compatible with the bss_sock bio */ 
-
-	/* called when the connection is initially made
-	 *  callback(BIO,state,ret);  The callback should return
-	 * 'ret'.  state is for compatibility with the ssl info_callback */
-	int (*info_callback)(const BIO *bio,int state,int ret);
-	} BIO_CONNECT;
-
-static int conn_write(BIO *h, const char *buf, int num);
-static int conn_read(BIO *h, char *buf, int size);
-static int conn_puts(BIO *h, const char *str);
-static long conn_ctrl(BIO *h, int cmd, long arg1, void *arg2);
-static int conn_new(BIO *h);
-static int conn_free(BIO *data);
-static long conn_callback_ctrl(BIO *h, int cmd, bio_info_cb *);
-
-static int conn_state(BIO *b, BIO_CONNECT *c);
-static void conn_close_socket(BIO *data);
-BIO_CONNECT *BIO_CONNECT_new(void );
-void BIO_CONNECT_free(BIO_CONNECT *a);
-
-static BIO_METHOD methods_connectp=
-	{
-	BIO_TYPE_CONNECT,
-	"socket connect",
-	conn_write,
-	conn_read,
-	conn_puts,
-	NULL, /* connect_gets, */
-	conn_ctrl,
-	conn_new,
-	conn_free,
-	conn_callback_ctrl,
-	};
-
-static int conn_state(BIO *b, BIO_CONNECT *c)
-	{
-	int ret= -1,i;
-	unsigned long l;
-	char *p,*q;
-	int (*cb)(const BIO *,int,int)=NULL;
-
-	if (c->info_callback != NULL)
-		cb=c->info_callback;
-
-	for (;;)
-		{
-		switch (c->state)
-			{
-		case BIO_CONN_S_BEFORE:
-			p=c->param_hostname;
-			if (p == NULL)
-				{
-				BIOerr(BIO_F_CONN_STATE,BIO_R_NO_HOSTNAME_SPECIFIED);
-				goto exit_loop;
-				}
-			for ( ; *p != '\0'; p++)
-				{
-				if ((*p == ':') || (*p == '/')) break;
-				}
-
-			i= *p;
-			if ((i == ':') || (i == '/'))
-				{
-
-				*(p++)='\0';
-				if (i == ':')
-					{
-					for (q=p; *q; q++)
-						if (*q == '/')
-							{
-							*q='\0';
-							break;
-							}
-					if (c->param_port != NULL)
-						OPENSSL_free(c->param_port);
-					c->param_port=BUF_strdup(p);
-					}
-				}
-
-			if (c->param_port == NULL)
-				{
-				BIOerr(BIO_F_CONN_STATE,BIO_R_NO_PORT_SPECIFIED);
-				ERR_add_error_data(2,"host=",c->param_hostname);
-				goto exit_loop;
-				}
-			c->state=BIO_CONN_S_GET_IP;
-			break;
-
-		case BIO_CONN_S_GET_IP:
-			if (BIO_get_host_ip(c->param_hostname,&(c->ip[0])) <= 0)
-				goto exit_loop;
-			c->state=BIO_CONN_S_GET_PORT;
-			break;
-
-		case BIO_CONN_S_GET_PORT:
-			if (c->param_port == NULL)
-				{
-				/* abort(); */
-				goto exit_loop;
-				}
-			else if (BIO_get_port(c->param_port,&c->port) <= 0)
-				goto exit_loop;
-			c->state=BIO_CONN_S_CREATE_SOCKET;
-			break;
-
-		case BIO_CONN_S_CREATE_SOCKET:
-			/* now setup address */
-			memset((char *)&c->them,0,sizeof(c->them));
-			c->them.sin_family=AF_INET;
-			c->them.sin_port=htons((unsigned short)c->port);
-			l=(unsigned long)
-				((unsigned long)c->ip[0]<<24L)|
-				((unsigned long)c->ip[1]<<16L)|
-				((unsigned long)c->ip[2]<< 8L)|
-				((unsigned long)c->ip[3]);
-			c->them.sin_addr.s_addr=htonl(l);
-			c->state=BIO_CONN_S_CREATE_SOCKET;
-
-			ret=socket(AF_INET,SOCK_STREAM,SOCKET_PROTOCOL);
-			if (ret == INVALID_SOCKET)
-				{
-				SYSerr(SYS_F_SOCKET,get_last_socket_error());
-				ERR_add_error_data(4,"host=",c->param_hostname,
-					":",c->param_port);
-				BIOerr(BIO_F_CONN_STATE,BIO_R_UNABLE_TO_CREATE_SOCKET);
-				goto exit_loop;
-				}
-			b->num=ret;
-			c->state=BIO_CONN_S_NBIO;
-			break;
-
-		case BIO_CONN_S_NBIO:
-			if (c->nbio)
-				{
-				if (!BIO_socket_nbio(b->num,1))
-					{
-					BIOerr(BIO_F_CONN_STATE,BIO_R_ERROR_SETTING_NBIO);
-					ERR_add_error_data(4,"host=",
-						c->param_hostname,
-						":",c->param_port);
-					goto exit_loop;
-					}
-				}
-			c->state=BIO_CONN_S_CONNECT;
-
-#if defined(SO_KEEPALIVE) && !defined(OPENSSL_SYS_MPE)
-			i=1;
-			i=setsockopt(b->num,SOL_SOCKET,SO_KEEPALIVE,(char *)&i,sizeof(i));
-			if (i < 0)
-				{
-				SYSerr(SYS_F_SOCKET,get_last_socket_error());
-				ERR_add_error_data(4,"host=",c->param_hostname,
-					":",c->param_port);
-				BIOerr(BIO_F_CONN_STATE,BIO_R_KEEPALIVE);
-				goto exit_loop;
-				}
-#endif
-			break;
-
-		case BIO_CONN_S_CONNECT:
-			BIO_clear_retry_flags(b);
-			ret=connect(b->num,
-				(struct sockaddr *)&c->them,
-				sizeof(c->them));
-			b->retry_reason=0;
-			if (ret < 0)
-				{
-				if (BIO_sock_should_retry(ret))
-					{
-					BIO_set_retry_special(b);
-					c->state=BIO_CONN_S_BLOCKED_CONNECT;
-					b->retry_reason=BIO_RR_CONNECT;
-					}
-				else
-					{
-					SYSerr(SYS_F_CONNECT,get_last_socket_error());
-					ERR_add_error_data(4,"host=",
-						c->param_hostname,
-						":",c->param_port);
-					BIOerr(BIO_F_CONN_STATE,BIO_R_CONNECT_ERROR);
-					}
-				goto exit_loop;
-				}
-			else
-				c->state=BIO_CONN_S_OK;
-			break;
-
-		case BIO_CONN_S_BLOCKED_CONNECT:
-			i=BIO_sock_error(b->num);
-			if (i)
-				{
-				BIO_clear_retry_flags(b);
-				SYSerr(SYS_F_CONNECT,i);
-				ERR_add_error_data(4,"host=",
-					c->param_hostname,
-					":",c->param_port);
-				BIOerr(BIO_F_CONN_STATE,BIO_R_NBIO_CONNECT_ERROR);
-				ret=0;
-				goto exit_loop;
-				}
-			else
-				c->state=BIO_CONN_S_OK;
-			break;
-
-		case BIO_CONN_S_OK:
-			ret=1;
-			goto exit_loop;
-		default:
-			/* abort(); */
-			goto exit_loop;
-			}
-
-		if (cb != NULL)
-			{
-			if (!(ret=cb((BIO *)b,c->state,ret)))
-				goto end;
-			}
-		}
-
-	/* Loop does not exit */
-exit_loop:
-	if (cb != NULL)
-		ret=cb((BIO *)b,c->state,ret);
-end:
-	return(ret);
-	}
-
-BIO_CONNECT *BIO_CONNECT_new(void)
-	{
-	BIO_CONNECT *ret;
-
-	if ((ret=(BIO_CONNECT *)OPENSSL_malloc(sizeof(BIO_CONNECT))) == NULL)
-		return(NULL);
-	ret->state=BIO_CONN_S_BEFORE;
-	ret->param_hostname=NULL;
-	ret->param_port=NULL;
-	ret->info_callback=NULL;
-	ret->nbio=0;
-	ret->ip[0]=0;
-	ret->ip[1]=0;
-	ret->ip[2]=0;
-	ret->ip[3]=0;
-	ret->port=0;
-	memset((char *)&ret->them,0,sizeof(ret->them));
-	return(ret);
-	}
-
-void BIO_CONNECT_free(BIO_CONNECT *a)
-	{
-	if(a == NULL)
-	    return;
-
-	if (a->param_hostname != NULL)
-		OPENSSL_free(a->param_hostname);
-	if (a->param_port != NULL)
-		OPENSSL_free(a->param_port);
-	OPENSSL_free(a);
-	}
-
-BIO_METHOD *BIO_s_connect(void)
-	{
-	return(&methods_connectp);
-	}
-
-static int conn_new(BIO *bi)
-	{
-	bi->init=0;
-	bi->num=INVALID_SOCKET;
-	bi->flags=0;
-	if ((bi->ptr=(char *)BIO_CONNECT_new()) == NULL)
-		return(0);
-	else
-		return(1);
-	}
-
-static void conn_close_socket(BIO *bio)
-	{
-	BIO_CONNECT *c;
-
-	c=(BIO_CONNECT *)bio->ptr;
-	if (bio->num != INVALID_SOCKET)
-		{
-		/* Only do a shutdown if things were established */
-		if (c->state == BIO_CONN_S_OK)
-			shutdown(bio->num,2);
-		closesocket(bio->num);
-		bio->num=INVALID_SOCKET;
-		}
-	}
-
-static int conn_free(BIO *a)
-	{
-	BIO_CONNECT *data;
-
-	if (a == NULL) return(0);
-	data=(BIO_CONNECT *)a->ptr;
-	 
-	if (a->shutdown)
-		{
-		conn_close_socket(a);
-		BIO_CONNECT_free(data);
-		a->ptr=NULL;
-		a->flags=0;
-		a->init=0;
-		}
-	return(1);
-	}
-	
-static int conn_read(BIO *b, char *out, int outl)
-	{
-	int ret=0;
-	BIO_CONNECT *data;
-
-	data=(BIO_CONNECT *)b->ptr;
-	if (data->state != BIO_CONN_S_OK)
-		{
-		ret=conn_state(b,data);
-		if (ret <= 0)
-				return(ret);
-		}
-
-	if (out != NULL)
-		{
-		clear_socket_error();
-		ret=readsocket(b->num,out,outl);
-		BIO_clear_retry_flags(b);
-		if (ret <= 0)
-			{
-			if (BIO_sock_should_retry(ret))
-				BIO_set_retry_read(b);
-			}
-		}
-	return(ret);
-	}
-
-static int conn_write(BIO *b, const char *in, int inl)
-	{
-	int ret;
-	BIO_CONNECT *data;
-
-	data=(BIO_CONNECT *)b->ptr;
-	if (data->state != BIO_CONN_S_OK)
-		{
-		ret=conn_state(b,data);
-		if (ret <= 0) return(ret);
-		}
-
-	clear_socket_error();
-	ret=writesocket(b->num,in,inl);
-	BIO_clear_retry_flags(b);
-	if (ret <= 0)
-		{
-		if (BIO_sock_should_retry(ret))
-			BIO_set_retry_write(b);
-		}
-	return(ret);
-	}
-
-static long conn_ctrl(BIO *b, int cmd, long num, void *ptr)
-	{
-	BIO *dbio;
-	int *ip;
-	const char **pptr;
-	long ret=1;
-	BIO_CONNECT *data;
-
-	data=(BIO_CONNECT *)b->ptr;
-
-	switch (cmd)
-		{
-	case BIO_CTRL_RESET:
-		ret=0;
-		data->state=BIO_CONN_S_BEFORE;
-		conn_close_socket(b);
-		b->flags=0;
-		break;
-	case BIO_C_DO_STATE_MACHINE:
-		/* use this one to start the connection */
-		if (data->state != BIO_CONN_S_OK)
-			ret=(long)conn_state(b,data);
-		else
-			ret=1;
-		break;
-	case BIO_C_GET_CONNECT:
-		if (ptr != NULL)
-			{
-			pptr=(const char **)ptr;
-			if (num == 0)
-				{
-				*pptr=data->param_hostname;
-
-				}
-			else if (num == 1)
-				{
-				*pptr=data->param_port;
-				}
-			else if (num == 2)
-				{
-				*pptr= (char *)&(data->ip[0]);
-				}
-			else if (num == 3)
-				{
-				*((int *)ptr)=data->port;
-				}
-			if ((!b->init) || (ptr == NULL))
-				*pptr="not initialized";
-			ret=1;
-			}
-		break;
-	case BIO_C_SET_CONNECT:
-		if (ptr != NULL)
-			{
-			b->init=1;
-			if (num == 0)
-				{
-				if (data->param_hostname != NULL)
-					OPENSSL_free(data->param_hostname);
-				data->param_hostname=BUF_strdup(ptr);
-				}
-			else if (num == 1)
-				{
-				if (data->param_port != NULL)
-					OPENSSL_free(data->param_port);
-				data->param_port=BUF_strdup(ptr);
-				}
-			else if (num == 2)
-				{
-				char buf[16];
-				unsigned char *p = ptr;
-
-				BIO_snprintf(buf,sizeof buf,"%d.%d.%d.%d",
-					     p[0],p[1],p[2],p[3]);
-				if (data->param_hostname != NULL)
-					OPENSSL_free(data->param_hostname);
-				data->param_hostname=BUF_strdup(buf);
-				memcpy(&(data->ip[0]),ptr,4);
-				}
-			else if (num == 3)
-				{
-				char buf[DECIMAL_SIZE(int)+1];
-
-				BIO_snprintf(buf,sizeof buf,"%d",*(int *)ptr);
-				if (data->param_port != NULL)
-					OPENSSL_free(data->param_port);
-				data->param_port=BUF_strdup(buf);
-				data->port= *(int *)ptr;
-				}
-			}
-		break;
-	case BIO_C_SET_NBIO:
-		data->nbio=(int)num;
-		break;
-	case BIO_C_GET_FD:
-		if (b->init)
-			{
-			ip=(int *)ptr;
-			if (ip != NULL)
-				*ip=b->num;
-			ret=b->num;
-			}
-		else
-			ret= -1;
-		break;
-	case BIO_CTRL_GET_CLOSE:
-		ret=b->shutdown;
-		break;
-	case BIO_CTRL_SET_CLOSE:
-		b->shutdown=(int)num;
-		break;
-	case BIO_CTRL_PENDING:
-	case BIO_CTRL_WPENDING:
-		ret=0;
-		break;
-	case BIO_CTRL_FLUSH:
-		break;
-	case BIO_CTRL_DUP:
-		{
-		dbio=(BIO *)ptr;
-		if (data->param_port)
-			BIO_set_conn_port(dbio,data->param_port);
-		if (data->param_hostname)
-			BIO_set_conn_hostname(dbio,data->param_hostname);
-		BIO_set_nbio(dbio,data->nbio);
-		/* FIXME: the cast of the function seems unlikely to be a good idea */
-                (void)BIO_set_info_callback(dbio,(bio_info_cb *)data->info_callback);
-		}
-		break;
-	case BIO_CTRL_SET_CALLBACK:
-		{
-#if 0 /* FIXME: Should this be used?  -- Richard Levitte */
-		BIOerr(BIO_F_CONN_CTRL, ERR_R_SHOULD_NOT_HAVE_BEEN_CALLED);
-		ret = -1;
-#else
-		ret=0;
-#endif
-		}
-		break;
-	case BIO_CTRL_GET_CALLBACK:
-		{
-		int (**fptr)(const BIO *bio,int state,int xret);
-
-		fptr=(int (**)(const BIO *bio,int state,int xret))ptr;
-		*fptr=data->info_callback;
-		}
-		break;
-	default:
-		ret=0;
-		break;
-		}
-	return(ret);
-	}
-
-static long conn_callback_ctrl(BIO *b, int cmd, bio_info_cb *fp)
-	{
-	long ret=1;
-	BIO_CONNECT *data;
-
-	data=(BIO_CONNECT *)b->ptr;
-
-	switch (cmd)
-		{
-	case BIO_CTRL_SET_CALLBACK:
-		{
-		data->info_callback=(int (*)(const struct bio_st *, int, int))fp;
-		}
-		break;
-	default:
-		ret=0;
-		break;
-		}
-	return(ret);
-	}
-
-static int conn_puts(BIO *bp, const char *str)
-	{
-	int n,ret;
-
-	n=strlen(str);
-	ret=conn_write(bp,str,n);
-	return(ret);
-	}
-
-BIO *BIO_new_connect(char *str)
-	{
-	BIO *ret;
-
-	ret=BIO_new(BIO_s_connect());
-	if (ret == NULL) return(NULL);
-	if (BIO_set_conn_hostname(ret,str))
-		return(ret);
-	else
-		{
-		BIO_free(ret);
-		return(NULL);
-		}
-	}
-
-#endif
-
diff --git a/crypto/openssl/crypto/bio/bss_dgram.c b/crypto/openssl/crypto/bio/bss_dgram.c
deleted file mode 100644
index a0cb29b3dcee..000000000000
--- a/crypto/openssl/crypto/bio/bss_dgram.c
+++ /dev/null
@@ -1,484 +0,0 @@
-/* crypto/bio/bio_dgram.c */
-/* 
- * DTLS implementation written by Nagendra Modadugu
- * (nagendra@cs.stanford.edu) for the OpenSSL project 2005.  
- */
-/* ====================================================================
- * Copyright (c) 1999-2005 The OpenSSL Project.  All rights reserved.
- *
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions
- * are met:
- *
- * 1. Redistributions of source code must retain the above copyright
- *    notice, this list of conditions and the following disclaimer. 
- *
- * 2. Redistributions in binary form must reproduce the above copyright
- *    notice, this list of conditions and the following disclaimer in
- *    the documentation and/or other materials provided with the
- *    distribution.
- *
- * 3. All advertising materials mentioning features or use of this
- *    software must display the following acknowledgment:
- *    "This product includes software developed by the OpenSSL Project
- *    for use in the OpenSSL Toolkit. (http://www.OpenSSL.org/)"
- *
- * 4. The names "OpenSSL Toolkit" and "OpenSSL Project" must not be used to
- *    endorse or promote products derived from this software without
- *    prior written permission. For written permission, please contact
- *    openssl-core@OpenSSL.org.
- *
- * 5. Products derived from this software may not be called "OpenSSL"
- *    nor may "OpenSSL" appear in their names without prior written
- *    permission of the OpenSSL Project.
- *
- * 6. Redistributions of any form whatsoever must retain the following
- *    acknowledgment:
- *    "This product includes software developed by the OpenSSL Project
- *    for use in the OpenSSL Toolkit (http://www.OpenSSL.org/)"
- *
- * THIS SOFTWARE IS PROVIDED BY THE OpenSSL PROJECT ``AS IS'' AND ANY
- * EXPRESSED OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
- * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR
- * PURPOSE ARE DISCLAIMED.  IN NO EVENT SHALL THE OpenSSL PROJECT OR
- * ITS CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
- * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
- * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
- * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
- * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
- * STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
- * ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED
- * OF THE POSSIBILITY OF SUCH DAMAGE.
- * ====================================================================
- *
- * This product includes cryptographic software written by Eric Young
- * (eay@cryptsoft.com).  This product includes software written by Tim
- * Hudson (tjh@cryptsoft.com).
- *
- */
-
-#ifndef OPENSSL_NO_DGRAM
-
-#include <stdio.h>
-#include <errno.h>
-#define USE_SOCKETS
-#include "cryptlib.h"
-
-#include <openssl/bio.h>
-
-#define IP_MTU      14 /* linux is lame */
-
-#ifdef WATT32
-#define sock_write SockWrite  /* Watt-32 uses same names */
-#define sock_read  SockRead
-#define sock_puts  SockPuts
-#endif
-
-static int dgram_write(BIO *h, const char *buf, int num);
-static int dgram_read(BIO *h, char *buf, int size);
-static int dgram_puts(BIO *h, const char *str);
-static long dgram_ctrl(BIO *h, int cmd, long arg1, void *arg2);
-static int dgram_new(BIO *h);
-static int dgram_free(BIO *data);
-static int dgram_clear(BIO *bio);
-
-int BIO_dgram_should_retry(int s);
-
-static BIO_METHOD methods_dgramp=
-	{
-	BIO_TYPE_DGRAM,
-	"datagram socket",
-	dgram_write,
-	dgram_read,
-	dgram_puts,
-	NULL, /* dgram_gets, */
-	dgram_ctrl,
-	dgram_new,
-	dgram_free,
-	NULL,
-	};
-
-typedef struct bio_dgram_data_st
-	{
-	struct sockaddr peer;
-	unsigned int connected;
-	unsigned int _errno;
-	unsigned int mtu;
-	} bio_dgram_data;
-
-BIO_METHOD *BIO_s_datagram(void)
-	{
-	return(&methods_dgramp);
-	}
-
-BIO *BIO_new_dgram(int fd, int close_flag)
-	{
-	BIO *ret;
-
-	ret=BIO_new(BIO_s_datagram());
-	if (ret == NULL) return(NULL);
-	BIO_set_fd(ret,fd,close_flag);
-	return(ret);
-	}
-
-static int dgram_new(BIO *bi)
-	{
-	bio_dgram_data *data = NULL;
-
-	bi->init=0;
-	bi->num=0;
-	data = OPENSSL_malloc(sizeof(bio_dgram_data));
-	if (data == NULL)
-		return 0;
-	memset(data, 0x00, sizeof(bio_dgram_data));
-    bi->ptr = data;
-
-	bi->flags=0;
-	return(1);
-	}
-
-static int dgram_free(BIO *a)
-	{
-	bio_dgram_data *data;
-
-	if (a == NULL) return(0);
-	if ( ! dgram_clear(a))
-		return 0;
-
-	data = (bio_dgram_data *)a->ptr;
-	if(data != NULL) OPENSSL_free(data);
-
-	return(1);
-	}
-
-static int dgram_clear(BIO *a)
-	{
-	if (a == NULL) return(0);
-	if (a->shutdown)
-		{
-		if (a->init)
-			{
-			SHUTDOWN2(a->num);
-			}
-		a->init=0;
-		a->flags=0;
-		}
-	return(1);
-	}
-	
-static int dgram_read(BIO *b, char *out, int outl)
-	{
-	int ret=0;
-	bio_dgram_data *data = (bio_dgram_data *)b->ptr;
-
-	struct sockaddr peer;
-	int peerlen = sizeof(peer);
-
-	if (out != NULL)
-		{
-		clear_socket_error();
-		memset(&peer, 0x00, peerlen);
-		/* Last arg in recvfrom is signed on some platforms and
-		 * unsigned on others. It is of type socklen_t on some
-		 * but this is not universal. Cast to (void *) to avoid
-		 * compiler warnings.
-		 */
-		ret=recvfrom(b->num,out,outl,0,&peer,(void *)&peerlen);
-
-		if ( ! data->connected  && ret > 0)
-			BIO_ctrl(b, BIO_CTRL_DGRAM_CONNECT, 0, &peer);
-
-		BIO_clear_retry_flags(b);
-		if (ret <= 0)
-			{
-			if (BIO_dgram_should_retry(ret))
-				{
-				BIO_set_retry_read(b);
-				data->_errno = get_last_socket_error();
-				}
-			}
-		}
-	return(ret);
-	}
-
-static int dgram_write(BIO *b, const char *in, int inl)
-	{
-	int ret;
-	bio_dgram_data *data = (bio_dgram_data *)b->ptr;
-	clear_socket_error();
-
-    if ( data->connected )
-        ret=send(b->num,in,inl,0);
-    else
-        ret=sendto(b->num, in, inl, 0, &data->peer, sizeof(data->peer));
-
-	BIO_clear_retry_flags(b);
-	if (ret <= 0)
-		{
-		if (BIO_sock_should_retry(ret))
-			{
-			BIO_set_retry_write(b);  
-			data->_errno = get_last_socket_error();
-
-#if 0 /* higher layers are responsible for querying MTU, if necessary */
-			if ( data->_errno == EMSGSIZE)
-				/* retrieve the new MTU */
-				BIO_ctrl(b, BIO_CTRL_DGRAM_QUERY_MTU, 0, NULL);
-#endif
-			}
-		}
-	return(ret);
-	}
-
-static long dgram_ctrl(BIO *b, int cmd, long num, void *ptr)
-	{
-	long ret=1;
-	int *ip;
-	struct sockaddr *to = NULL;
-	bio_dgram_data *data = NULL;
-	long sockopt_val = 0;
-	unsigned int sockopt_len = 0;
-
-	data = (bio_dgram_data *)b->ptr;
-
-	switch (cmd)
-		{
-	case BIO_CTRL_RESET:
-		num=0;
-	case BIO_C_FILE_SEEK:
-		ret=0;
-		break;
-	case BIO_C_FILE_TELL:
-	case BIO_CTRL_INFO:
-		ret=0;
-		break;
-	case BIO_C_SET_FD:
-		dgram_clear(b);
-		b->num= *((int *)ptr);
-		b->shutdown=(int)num;
-		b->init=1;
-		break;
-	case BIO_C_GET_FD:
-		if (b->init)
-			{
-			ip=(int *)ptr;
-			if (ip != NULL) *ip=b->num;
-			ret=b->num;
-			}
-		else
-			ret= -1;
-		break;
-	case BIO_CTRL_GET_CLOSE:
-		ret=b->shutdown;
-		break;
-	case BIO_CTRL_SET_CLOSE:
-		b->shutdown=(int)num;
-		break;
-	case BIO_CTRL_PENDING:
-	case BIO_CTRL_WPENDING:
-		ret=0;
-		break;
-	case BIO_CTRL_DUP:
-	case BIO_CTRL_FLUSH:
-		ret=1;
-		break;
-	case BIO_CTRL_DGRAM_CONNECT:
-		to = (struct sockaddr *)ptr;
-#if 0
-		if (connect(b->num, to, sizeof(struct sockaddr)) < 0)
-			{ perror("connect"); ret = 0; }
-		else
-			{
-#endif
-			memcpy(&(data->peer),to, sizeof(struct sockaddr));
-#if 0
-			}
-#endif
-		break;
-		/* (Linux)kernel sets DF bit on outgoing IP packets */
-#ifdef IP_MTU_DISCOVER
-	case BIO_CTRL_DGRAM_MTU_DISCOVER:
-		sockopt_val = IP_PMTUDISC_DO;
-		if ((ret = setsockopt(b->num, IPPROTO_IP, IP_MTU_DISCOVER,
-			&sockopt_val, sizeof(sockopt_val))) < 0)
-			perror("setsockopt");
-		break;
-#endif
-	case BIO_CTRL_DGRAM_QUERY_MTU:
-         sockopt_len = sizeof(sockopt_val);
-		if ((ret = getsockopt(b->num, IPPROTO_IP, IP_MTU, (void *)&sockopt_val,
-			&sockopt_len)) < 0 || sockopt_val < 0)
-			{ ret = 0; }
-		else
-			{
-			data->mtu = sockopt_val;
-			ret = data->mtu;
-			}
-		break;
-	case BIO_CTRL_DGRAM_GET_MTU:
-		return data->mtu;
-		break;
-	case BIO_CTRL_DGRAM_SET_MTU:
-		data->mtu = num;
-		ret = num;
-		break;
-	case BIO_CTRL_DGRAM_SET_CONNECTED:
-		to = (struct sockaddr *)ptr;
-
-		if ( to != NULL)
-			{
-			data->connected = 1;
-			memcpy(&(data->peer),to, sizeof(struct sockaddr));
-			}
-		else
-			{
-			data->connected = 0;
-			memset(&(data->peer), 0x00, sizeof(struct sockaddr));
-			}
-		break;
-    case BIO_CTRL_DGRAM_SET_PEER:
-        to = (struct sockaddr *) ptr;
-
-        memcpy(&(data->peer), to, sizeof(struct sockaddr));
-        break;
-	case BIO_CTRL_DGRAM_SET_RECV_TIMEOUT:
-		if ( setsockopt(b->num, SOL_SOCKET, SO_RCVTIMEO, ptr,
-			sizeof(struct timeval)) < 0)
-			{ perror("setsockopt");	ret = -1; }
-		break;
-	case BIO_CTRL_DGRAM_GET_RECV_TIMEOUT:
-		if ( getsockopt(b->num, SOL_SOCKET, SO_RCVTIMEO, 
-			ptr, (void *)&ret) < 0)
-			{ perror("getsockopt"); ret = -1; }
-		break;
-	case BIO_CTRL_DGRAM_SET_SEND_TIMEOUT:
-		if ( setsockopt(b->num, SOL_SOCKET, SO_SNDTIMEO, ptr,
-			sizeof(struct timeval)) < 0)
-			{ perror("setsockopt");	ret = -1; }
-		break;
-	case BIO_CTRL_DGRAM_GET_SEND_TIMEOUT:
-		if ( getsockopt(b->num, SOL_SOCKET, SO_SNDTIMEO, 
-			ptr, (void *)&ret) < 0)
-			{ perror("getsockopt"); ret = -1; }
-		break;
-	case BIO_CTRL_DGRAM_GET_SEND_TIMER_EXP:
-		/* fall-through */
-	case BIO_CTRL_DGRAM_GET_RECV_TIMER_EXP:
-		if ( data->_errno == EAGAIN)
-			{
-			ret = 1;
-			data->_errno = 0;
-			}
-		else
-			ret = 0;
-		break;
-#ifdef EMSGSIZE
-	case BIO_CTRL_DGRAM_MTU_EXCEEDED:
-		if ( data->_errno == EMSGSIZE)
-			{
-			ret = 1;
-			data->_errno = 0;
-			}
-		else
-			ret = 0;
-		break;
-#endif
-	default:
-		ret=0;
-		break;
-		}
-	return(ret);
-	}
-
-static int dgram_puts(BIO *bp, const char *str)
-	{
-	int n,ret;
-
-	n=strlen(str);
-	ret=dgram_write(bp,str,n);
-	return(ret);
-	}
-
-int BIO_dgram_should_retry(int i)
-	{
-	int err;
-
-	if ((i == 0) || (i == -1))
-		{
-		err=get_last_socket_error();
-
-#if defined(OPENSSL_SYS_WINDOWS) && 0 /* more microsoft stupidity? perhaps not? Ben 4/1/99 */
-		if ((i == -1) && (err == 0))
-			return(1);
-#endif
-
-		return(BIO_dgram_non_fatal_error(err));
-		}
-	return(0);
-	}
-
-int BIO_dgram_non_fatal_error(int err)
-	{
-	switch (err)
-		{
-#if defined(OPENSSL_SYS_WINDOWS)
-# if defined(WSAEWOULDBLOCK)
-	case WSAEWOULDBLOCK:
-# endif
-
-# if 0 /* This appears to always be an error */
-#  if defined(WSAENOTCONN)
-	case WSAENOTCONN:
-#  endif
-# endif
-#endif
-
-#ifdef EWOULDBLOCK
-# ifdef WSAEWOULDBLOCK
-#  if WSAEWOULDBLOCK != EWOULDBLOCK
-	case EWOULDBLOCK:
-#  endif
-# else
-	case EWOULDBLOCK:
-# endif
-#endif
-
-#if defined(ENOTCONN)
-	case ENOTCONN:
-#endif
-
-#ifdef EINTR
-	case EINTR:
-#endif
-
-#ifdef EAGAIN
-#if EWOULDBLOCK != EAGAIN
-	case EAGAIN:
-# endif
-#endif
-
-#ifdef EPROTO
-	case EPROTO:
-#endif
-
-#ifdef EINPROGRESS
-	case EINPROGRESS:
-#endif
-
-#ifdef EALREADY
-	case EALREADY:
-#endif
-
-/* DF bit set, and packet larger than MTU */
-#ifdef EMSGSIZE
-	case EMSGSIZE:
-#endif
-
-		return(1);
-		/* break; */
-	default:
-		break;
-		}
-	return(0);
-	}
-#endif
diff --git a/crypto/openssl/crypto/bio/bss_fd.c b/crypto/openssl/crypto/bio/bss_fd.c
deleted file mode 100644
index 4c229bf64103..000000000000
--- a/crypto/openssl/crypto/bio/bss_fd.c
+++ /dev/null
@@ -1,294 +0,0 @@
-/* crypto/bio/bss_fd.c */
-/* Copyright (C) 1995-1998 Eric Young (eay@cryptsoft.com)
- * All rights reserved.
- *
- * This package is an SSL implementation written
- * by Eric Young (eay@cryptsoft.com).
- * The implementation was written so as to conform with Netscapes SSL.
- * 
- * This library is free for commercial and non-commercial use as long as
- * the following conditions are aheared to.  The following conditions
- * apply to all code found in this distribution, be it the RC4, RSA,
- * lhash, DES, etc., code; not just the SSL code.  The SSL documentation
- * included with this distribution is covered by the same copyright terms
- * except that the holder is Tim Hudson (tjh@cryptsoft.com).
- * 
- * Copyright remains Eric Young's, and as such any Copyright notices in
- * the code are not to be removed.
- * If this package is used in a product, Eric Young should be given attribution
- * as the author of the parts of the library used.
- * This can be in the form of a textual message at program startup or
- * in documentation (online or textual) provided with the package.
- * 
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions
- * are met:
- * 1. Redistributions of source code must retain the copyright
- *    notice, this list of conditions and the following disclaimer.
- * 2. Redistributions in binary form must reproduce the above copyright
- *    notice, this list of conditions and the following disclaimer in the
- *    documentation and/or other materials provided with the distribution.
- * 3. All advertising materials mentioning features or use of this software
- *    must display the following acknowledgement:
- *    "This product includes cryptographic software written by
- *     Eric Young (eay@cryptsoft.com)"
- *    The word 'cryptographic' can be left out if the rouines from the library
- *    being used are not cryptographic related :-).
- * 4. If you include any Windows specific code (or a derivative thereof) from 
- *    the apps directory (application code) you must include an acknowledgement:
- *    "This product includes software written by Tim Hudson (tjh@cryptsoft.com)"
- * 
- * THIS SOFTWARE IS PROVIDED BY ERIC YOUNG ``AS IS'' AND
- * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
- * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
- * ARE DISCLAIMED.  IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE
- * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
- * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
- * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
- * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
- * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
- * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
- * SUCH DAMAGE.
- * 
- * The licence and distribution terms for any publically available version or
- * derivative of this code cannot be changed.  i.e. this code cannot simply be
- * copied and put under another distribution licence
- * [including the GNU Public Licence.]
- */
-
-#include <stdio.h>
-#include <errno.h>
-#define USE_SOCKETS
-#include "cryptlib.h"
-/*
- * As for unconditional usage of "UPLINK" interface in this module.
- * Trouble is that unlike Unix file descriptors [which are indexes
- * in kernel-side per-process table], corresponding descriptors on
- * platforms which require "UPLINK" interface seem to be indexes
- * in a user-land, non-global table. Well, in fact they are indexes
- * in stdio _iob[], and recall that _iob[] was the very reason why
- * "UPLINK" interface was introduced in first place. But one way on
- * another. Neither libcrypto or libssl use this BIO meaning that
- * file descriptors can only be provided by application. Therefore
- * "UPLINK" calls are due...
- */
-#include "bio_lcl.h"
-
-static int fd_write(BIO *h, const char *buf, int num);
-static int fd_read(BIO *h, char *buf, int size);
-static int fd_puts(BIO *h, const char *str);
-static long fd_ctrl(BIO *h, int cmd, long arg1, void *arg2);
-static int fd_new(BIO *h);
-static int fd_free(BIO *data);
-int BIO_fd_should_retry(int s);
-
-static BIO_METHOD methods_fdp=
-	{
-	BIO_TYPE_FD,"file descriptor",
-	fd_write,
-	fd_read,
-	fd_puts,
-	NULL, /* fd_gets, */
-	fd_ctrl,
-	fd_new,
-	fd_free,
-	NULL,
-	};
-
-BIO_METHOD *BIO_s_fd(void)
-	{
-	return(&methods_fdp);
-	}
-
-BIO *BIO_new_fd(int fd,int close_flag)
-	{
-	BIO *ret;
-	ret=BIO_new(BIO_s_fd());
-	if (ret == NULL) return(NULL);
-	BIO_set_fd(ret,fd,close_flag);
-	return(ret);
-	}
-
-static int fd_new(BIO *bi)
-	{
-	bi->init=0;
-	bi->num=-1;
-	bi->ptr=NULL;
-	bi->flags=BIO_FLAGS_UPLINK; /* essentially redundant */
-	return(1);
-	}
-
-static int fd_free(BIO *a)
-	{
-	if (a == NULL) return(0);
-	if (a->shutdown)
-		{
-		if (a->init)
-			{
-			UP_close(a->num);
-			}
-		a->init=0;
-		a->flags=BIO_FLAGS_UPLINK;
-		}
-	return(1);
-	}
-	
-static int fd_read(BIO *b, char *out,int outl)
-	{
-	int ret=0;
-
-	if (out != NULL)
-		{
-		clear_sys_error();
-		ret=UP_read(b->num,out,outl);
-		BIO_clear_retry_flags(b);
-		if (ret <= 0)
-			{
-			if (BIO_fd_should_retry(ret))
-				BIO_set_retry_read(b);
-			}
-		}
-	return(ret);
-	}
-
-static int fd_write(BIO *b, const char *in, int inl)
-	{
-	int ret;
-	clear_sys_error();
-	ret=UP_write(b->num,in,inl);
-	BIO_clear_retry_flags(b);
-	if (ret <= 0)
-		{
-		if (BIO_fd_should_retry(ret))
-			BIO_set_retry_write(b);
-		}
-	return(ret);
-	}
-
-static long fd_ctrl(BIO *b, int cmd, long num, void *ptr)
-	{
-	long ret=1;
-	int *ip;
-
-	switch (cmd)
-		{
-	case BIO_CTRL_RESET:
-		num=0;
-	case BIO_C_FILE_SEEK:
-		ret=(long)UP_lseek(b->num,num,0);
-		break;
-	case BIO_C_FILE_TELL:
-	case BIO_CTRL_INFO:
-		ret=(long)UP_lseek(b->num,0,1);
-		break;
-	case BIO_C_SET_FD:
-		fd_free(b);
-		b->num= *((int *)ptr);
-		b->shutdown=(int)num;
-		b->init=1;
-		break;
-	case BIO_C_GET_FD:
-		if (b->init)
-			{
-			ip=(int *)ptr;
-			if (ip != NULL) *ip=b->num;
-			ret=b->num;
-			}
-		else
-			ret= -1;
-		break;
-	case BIO_CTRL_GET_CLOSE:
-		ret=b->shutdown;
-		break;
-	case BIO_CTRL_SET_CLOSE:
-		b->shutdown=(int)num;
-		break;
-	case BIO_CTRL_PENDING:
-	case BIO_CTRL_WPENDING:
-		ret=0;
-		break;
-	case BIO_CTRL_DUP:
-	case BIO_CTRL_FLUSH:
-		ret=1;
-		break;
-	default:
-		ret=0;
-		break;
-		}
-	return(ret);
-	}
-
-static int fd_puts(BIO *bp, const char *str)
-	{
-	int n,ret;
-
-	n=strlen(str);
-	ret=fd_write(bp,str,n);
-	return(ret);
-	}
-
-int BIO_fd_should_retry(int i)
-	{
-	int err;
-
-	if ((i == 0) || (i == -1))
-		{
-		err=get_last_sys_error();
-
-#if defined(OPENSSL_SYS_WINDOWS) && 0 /* more microsoft stupidity? perhaps not? Ben 4/1/99 */
-		if ((i == -1) && (err == 0))
-			return(1);
-#endif
-
-		return(BIO_fd_non_fatal_error(err));
-		}
-	return(0);
-	}
-
-int BIO_fd_non_fatal_error(int err)
-	{
-	switch (err)
-		{
-
-#ifdef EWOULDBLOCK
-# ifdef WSAEWOULDBLOCK
-#  if WSAEWOULDBLOCK != EWOULDBLOCK
-	case EWOULDBLOCK:
-#  endif
-# else
-	case EWOULDBLOCK:
-# endif
-#endif
-
-#if defined(ENOTCONN)
-	case ENOTCONN:
-#endif
-
-#ifdef EINTR
-	case EINTR:
-#endif
-
-#ifdef EAGAIN
-#if EWOULDBLOCK != EAGAIN
-	case EAGAIN:
-# endif
-#endif
-
-#ifdef EPROTO
-	case EPROTO:
-#endif
-
-#ifdef EINPROGRESS
-	case EINPROGRESS:
-#endif
-
-#ifdef EALREADY
-	case EALREADY:
-#endif
-		return(1);
-		/* break; */
-	default:
-		break;
-		}
-	return(0);
-	}
diff --git a/crypto/openssl/crypto/bio/bss_file.c b/crypto/openssl/crypto/bio/bss_file.c
deleted file mode 100644
index b277367da3a4..000000000000
--- a/crypto/openssl/crypto/bio/bss_file.c
+++ /dev/null
@@ -1,424 +0,0 @@
-/* crypto/bio/bss_file.c */
-/* Copyright (C) 1995-1998 Eric Young (eay@cryptsoft.com)
- * All rights reserved.
- *
- * This package is an SSL implementation written
- * by Eric Young (eay@cryptsoft.com).
- * The implementation was written so as to conform with Netscapes SSL.
- * 
- * This library is free for commercial and non-commercial use as long as
- * the following conditions are aheared to.  The following conditions
- * apply to all code found in this distribution, be it the RC4, RSA,
- * lhash, DES, etc., code; not just the SSL code.  The SSL documentation
- * included with this distribution is covered by the same copyright terms
- * except that the holder is Tim Hudson (tjh@cryptsoft.com).
- * 
- * Copyright remains Eric Young's, and as such any Copyright notices in
- * the code are not to be removed.
- * If this package is used in a product, Eric Young should be given attribution
- * as the author of the parts of the library used.
- * This can be in the form of a textual message at program startup or
- * in documentation (online or textual) provided with the package.
- * 
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions
- * are met:
- * 1. Redistributions of source code must retain the copyright
- *    notice, this list of conditions and the following disclaimer.
- * 2. Redistributions in binary form must reproduce the above copyright
- *    notice, this list of conditions and the following disclaimer in the
- *    documentation and/or other materials provided with the distribution.
- * 3. All advertising materials mentioning features or use of this software
- *    must display the following acknowledgement:
- *    "This product includes cryptographic software written by
- *     Eric Young (eay@cryptsoft.com)"
- *    The word 'cryptographic' can be left out if the rouines from the library
- *    being used are not cryptographic related :-).
- * 4. If you include any Windows specific code (or a derivative thereof) from 
- *    the apps directory (application code) you must include an acknowledgement:
- *    "This product includes software written by Tim Hudson (tjh@cryptsoft.com)"
- * 
- * THIS SOFTWARE IS PROVIDED BY ERIC YOUNG ``AS IS'' AND
- * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
- * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
- * ARE DISCLAIMED.  IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE
- * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
- * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
- * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
- * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
- * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
- * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
- * SUCH DAMAGE.
- * 
- * The licence and distribution terms for any publically available version or
- * derivative of this code cannot be changed.  i.e. this code cannot simply be
- * copied and put under another distribution licence
- * [including the GNU Public Licence.]
- */
-
-/*
- * 03-Dec-1997	rdenny@dc3.com  Fix bug preventing use of stdin/stdout
- *		with binary data (e.g. asn1parse -inform DER < xxx) under
- *		Windows
- */
-
-#ifndef HEADER_BSS_FILE_C
-#define HEADER_BSS_FILE_C
-
-#if defined(__linux) || defined(__sun) || defined(__hpux)
-/* Following definition aliases fopen to fopen64 on above mentioned
- * platforms. This makes it possible to open and sequentially access
- * files larger than 2GB from 32-bit application. It does not allow to
- * traverse them beyond 2GB with fseek/ftell, but on the other hand *no*
- * 32-bit platform permits that, not with fseek/ftell. Not to mention
- * that breaking 2GB limit for seeking would require surgery to *our*
- * API. But sequential access suffices for practical cases when you
- * can run into large files, such as fingerprinting, so we can let API
- * alone. For reference, the list of 32-bit platforms which allow for
- * sequential access of large files without extra "magic" comprise *BSD,
- * Darwin, IRIX...
- */
-#ifndef _FILE_OFFSET_BITS
-#define _FILE_OFFSET_BITS 64
-#endif
-#endif
-
-#include <stdio.h>
-#include <errno.h>
-#include "cryptlib.h"
-#include "bio_lcl.h"
-#include <openssl/err.h>
-
-#if !defined(OPENSSL_NO_STDIO)
-
-static int MS_CALLBACK file_write(BIO *h, const char *buf, int num);
-static int MS_CALLBACK file_read(BIO *h, char *buf, int size);
-static int MS_CALLBACK file_puts(BIO *h, const char *str);
-static int MS_CALLBACK file_gets(BIO *h, char *str, int size);
-static long MS_CALLBACK file_ctrl(BIO *h, int cmd, long arg1, void *arg2);
-static int MS_CALLBACK file_new(BIO *h);
-static int MS_CALLBACK file_free(BIO *data);
-static BIO_METHOD methods_filep=
-	{
-	BIO_TYPE_FILE,
-	"FILE pointer",
-	file_write,
-	file_read,
-	file_puts,
-	file_gets,
-	file_ctrl,
-	file_new,
-	file_free,
-	NULL,
-	};
-
-BIO *BIO_new_file(const char *filename, const char *mode)
-	{
-	BIO *ret;
-	FILE *file;
-
-	if ((file=fopen(filename,mode)) == NULL)
-		{
-		SYSerr(SYS_F_FOPEN,get_last_sys_error());
-		ERR_add_error_data(5,"fopen('",filename,"','",mode,"')");
-		if (errno == ENOENT)
-			BIOerr(BIO_F_BIO_NEW_FILE,BIO_R_NO_SUCH_FILE);
-		else
-			BIOerr(BIO_F_BIO_NEW_FILE,ERR_R_SYS_LIB);
-		return(NULL);
-		}
-	if ((ret=BIO_new(BIO_s_file_internal())) == NULL)
-		{
-		fclose(file);
-		return(NULL);
-		}
-
-	BIO_clear_flags(ret,BIO_FLAGS_UPLINK); /* we did fopen -> we disengage UPLINK */
-	BIO_set_fp(ret,file,BIO_CLOSE);
-	return(ret);
-	}
-
-BIO *BIO_new_fp(FILE *stream, int close_flag)
-	{
-	BIO *ret;
-
-	if ((ret=BIO_new(BIO_s_file())) == NULL)
-		return(NULL);
-
-	BIO_set_flags(ret,BIO_FLAGS_UPLINK); /* redundant, left for documentation puposes */
-	BIO_set_fp(ret,stream,close_flag);
-	return(ret);
-	}
-
-BIO_METHOD *BIO_s_file(void)
-	{
-	return(&methods_filep);
-	}
-
-static int MS_CALLBACK file_new(BIO *bi)
-	{
-	bi->init=0;
-	bi->num=0;
-	bi->ptr=NULL;
-	bi->flags=BIO_FLAGS_UPLINK; /* default to UPLINK */
-	return(1);
-	}
-
-static int MS_CALLBACK file_free(BIO *a)
-	{
-	if (a == NULL) return(0);
-	if (a->shutdown)
-		{
-		if ((a->init) && (a->ptr != NULL))
-			{
-			if (a->flags&BIO_FLAGS_UPLINK)
-				UP_fclose (a->ptr);
-			else
-				fclose (a->ptr);
-			a->ptr=NULL;
-			a->flags=BIO_FLAGS_UPLINK;
-			}
-		a->init=0;
-		}
-	return(1);
-	}
-	
-static int MS_CALLBACK file_read(BIO *b, char *out, int outl)
-	{
-	int ret=0;
-
-	if (b->init && (out != NULL))
-		{
-		if (b->flags&BIO_FLAGS_UPLINK)
-			ret=UP_fread(out,1,(int)outl,b->ptr);
-		else
-			ret=fread(out,1,(int)outl,(FILE *)b->ptr);
-		if(ret == 0 && (b->flags&BIO_FLAGS_UPLINK)?UP_ferror((FILE *)b->ptr):ferror((FILE *)b->ptr))
-			{
-			SYSerr(SYS_F_FREAD,get_last_sys_error());
-			BIOerr(BIO_F_FILE_READ,ERR_R_SYS_LIB);
-			ret=-1;
-			}
-		}
-	return(ret);
-	}
-
-static int MS_CALLBACK file_write(BIO *b, const char *in, int inl)
-	{
-	int ret=0;
-
-	if (b->init && (in != NULL))
-		{
-		if (b->flags&BIO_FLAGS_UPLINK)
-			ret=UP_fwrite(in,(int)inl,1,b->ptr);
-		else
-			ret=fwrite(in,(int)inl,1,(FILE *)b->ptr);
-		if (ret)
-			ret=inl;
-		/* ret=fwrite(in,1,(int)inl,(FILE *)b->ptr); */
-		/* according to Tim Hudson <tjh@cryptsoft.com>, the commented
-		 * out version above can cause 'inl' write calls under
-		 * some stupid stdio implementations (VMS) */
-		}
-	return(ret);
-	}
-
-static long MS_CALLBACK file_ctrl(BIO *b, int cmd, long num, void *ptr)
-	{
-	long ret=1;
-	FILE *fp=(FILE *)b->ptr;
-	FILE **fpp;
-	char p[4];
-
-	switch (cmd)
-		{
-	case BIO_C_FILE_SEEK:
-	case BIO_CTRL_RESET:
-		if (b->flags&BIO_FLAGS_UPLINK)
-			ret=(long)UP_fseek(b->ptr,num,0);
-		else
-			ret=(long)fseek(fp,num,0);
-		break;
-	case BIO_CTRL_EOF:
-		if (b->flags&BIO_FLAGS_UPLINK)
-			ret=(long)UP_feof(fp);
-		else
-			ret=(long)feof(fp);
-		break;
-	case BIO_C_FILE_TELL:
-	case BIO_CTRL_INFO:
-		if (b->flags&BIO_FLAGS_UPLINK)
-			ret=UP_ftell(b->ptr);
-		else
-			ret=ftell(fp);
-		break;
-	case BIO_C_SET_FILE_PTR:
-		file_free(b);
-		b->shutdown=(int)num&BIO_CLOSE;
-		b->ptr=ptr;
-		b->init=1;
-#if BIO_FLAGS_UPLINK!=0
-#if defined(__MINGW32__) && defined(__MSVCRT__) && !defined(_IOB_ENTRIES)
-#define _IOB_ENTRIES 20
-#endif
-#if defined(_IOB_ENTRIES)
-		/* Safety net to catch purely internal BIO_set_fp calls */
-		if ((size_t)ptr >= (size_t)stdin &&
-		    (size_t)ptr <  (size_t)(stdin+_IOB_ENTRIES))
-			BIO_clear_flags(b,BIO_FLAGS_UPLINK);
-#endif
-#endif
-#ifdef UP_fsetmode
-		if (b->flags&BIO_FLAGS_UPLINK)
-			UP_fsetmode(b->ptr,num&BIO_FP_TEXT?'t':'b');
-		else
-#endif
-		{
-#if defined(OPENSSL_SYS_WINDOWS)
-		int fd = fileno((FILE*)ptr);
-		if (num & BIO_FP_TEXT)
-			_setmode(fd,_O_TEXT);
-		else
-			_setmode(fd,_O_BINARY);
-#elif defined(OPENSSL_SYS_NETWARE) && defined(NETWARE_CLIB)
-		int fd = fileno((FILE*)ptr);
-         /* Under CLib there are differences in file modes
-         */
-		if (num & BIO_FP_TEXT)
-			_setmode(fd,O_TEXT);
-		else
-			_setmode(fd,O_BINARY);
-#elif defined(OPENSSL_SYS_MSDOS)
-		int fd = fileno((FILE*)ptr);
-		/* Set correct text/binary mode */
-		if (num & BIO_FP_TEXT)
-			_setmode(fd,_O_TEXT);
-		/* Dangerous to set stdin/stdout to raw (unless redirected) */
-		else
-			{
-			if (fd == STDIN_FILENO || fd == STDOUT_FILENO)
-				{
-				if (isatty(fd) <= 0)
-					_setmode(fd,_O_BINARY);
-				}
-			else
-				_setmode(fd,_O_BINARY);
-			}
-#elif defined(OPENSSL_SYS_OS2)
-		int fd = fileno((FILE*)ptr);
-		if (num & BIO_FP_TEXT)
-			setmode(fd, O_TEXT);
-		else
-			setmode(fd, O_BINARY);
-#endif
-		}
-		break;
-	case BIO_C_SET_FILENAME:
-		file_free(b);
-		b->shutdown=(int)num&BIO_CLOSE;
-		if (num & BIO_FP_APPEND)
-			{
-			if (num & BIO_FP_READ)
-				BUF_strlcpy(p,"a+",sizeof p);
-			else	BUF_strlcpy(p,"a",sizeof p);
-			}
-		else if ((num & BIO_FP_READ) && (num & BIO_FP_WRITE))
-			BUF_strlcpy(p,"r+",sizeof p);
-		else if (num & BIO_FP_WRITE)
-			BUF_strlcpy(p,"w",sizeof p);
-		else if (num & BIO_FP_READ)
-			BUF_strlcpy(p,"r",sizeof p);
-		else
-			{
-			BIOerr(BIO_F_FILE_CTRL,BIO_R_BAD_FOPEN_MODE);
-			ret=0;
-			break;
-			}
-#if defined(OPENSSL_SYS_MSDOS) || defined(OPENSSL_SYS_WINDOWS) || defined(OPENSSL_SYS_OS2) || defined(OPENSSL_SYS_WIN32_CYGWIN)
-		if (!(num & BIO_FP_TEXT))
-			strcat(p,"b");
-		else
-			strcat(p,"t");
-#endif
-#if defined(OPENSSL_SYS_NETWARE)
-		if (!(num & BIO_FP_TEXT))
-			strcat(p,"b");
-		else
-			strcat(p,"t");
-#endif
-		fp=fopen(ptr,p);
-		if (fp == NULL)
-			{
-			SYSerr(SYS_F_FOPEN,get_last_sys_error());
-			ERR_add_error_data(5,"fopen('",ptr,"','",p,"')");
-			BIOerr(BIO_F_FILE_CTRL,ERR_R_SYS_LIB);
-			ret=0;
-			break;
-			}
-		b->ptr=fp;
-		b->init=1;
-		BIO_clear_flags(b,BIO_FLAGS_UPLINK); /* we did fopen -> we disengage UPLINK */
-		break;
-	case BIO_C_GET_FILE_PTR:
-		/* the ptr parameter is actually a FILE ** in this case. */
-		if (ptr != NULL)
-			{
-			fpp=(FILE **)ptr;
-			*fpp=(FILE *)b->ptr;
-			}
-		break;
-	case BIO_CTRL_GET_CLOSE:
-		ret=(long)b->shutdown;
-		break;
-	case BIO_CTRL_SET_CLOSE:
-		b->shutdown=(int)num;
-		break;
-	case BIO_CTRL_FLUSH:
-		if (b->flags&BIO_FLAGS_UPLINK)
-			UP_fflush(b->ptr);
-		else
-			fflush((FILE *)b->ptr);
-		break;
-	case BIO_CTRL_DUP:
-		ret=1;
-		break;
-
-	case BIO_CTRL_WPENDING:
-	case BIO_CTRL_PENDING:
-	case BIO_CTRL_PUSH:
-	case BIO_CTRL_POP:
-	default:
-		ret=0;
-		break;
-		}
-	return(ret);
-	}
-
-static int MS_CALLBACK file_gets(BIO *bp, char *buf, int size)
-	{
-	int ret=0;
-
-	buf[0]='\0';
-	if (bp->flags&BIO_FLAGS_UPLINK)
-		UP_fgets(buf,size,bp->ptr);
-	else
-		fgets(buf,size,(FILE *)bp->ptr);
-	if (buf[0] != '\0')
-		ret=strlen(buf);
-	return(ret);
-	}
-
-static int MS_CALLBACK file_puts(BIO *bp, const char *str)
-	{
-	int n,ret;
-
-	n=strlen(str);
-	ret=file_write(bp,str,n);
-	return(ret);
-	}
-
-#endif /* OPENSSL_NO_STDIO */
-
-#endif /* HEADER_BSS_FILE_C */
-
-
diff --git a/crypto/openssl/crypto/bio/bss_log.c b/crypto/openssl/crypto/bio/bss_log.c
deleted file mode 100644
index 6360dbc820b4..000000000000
--- a/crypto/openssl/crypto/bio/bss_log.c
+++ /dev/null
@@ -1,402 +0,0 @@
-/* crypto/bio/bss_log.c */
-/* ====================================================================
- * Copyright (c) 1999 The OpenSSL Project.  All rights reserved.
- *
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions
- * are met:
- *
- * 1. Redistributions of source code must retain the above copyright
- *    notice, this list of conditions and the following disclaimer. 
- *
- * 2. Redistributions in binary form must reproduce the above copyright
- *    notice, this list of conditions and the following disclaimer in
- *    the documentation and/or other materials provided with the
- *    distribution.
- *
- * 3. All advertising materials mentioning features or use of this
- *    software must display the following acknowledgment:
- *    "This product includes software developed by the OpenSSL Project
- *    for use in the OpenSSL Toolkit. (http://www.OpenSSL.org/)"
- *
- * 4. The names "OpenSSL Toolkit" and "OpenSSL Project" must not be used to
- *    endorse or promote products derived from this software without
- *    prior written permission. For written permission, please contact
- *    licensing@OpenSSL.org.
- *
- * 5. Products derived from this software may not be called "OpenSSL"
- *    nor may "OpenSSL" appear in their names without prior written
- *    permission of the OpenSSL Project.
- *
- * 6. Redistributions of any form whatsoever must retain the following
- *    acknowledgment:
- *    "This product includes software developed by the OpenSSL Project
- *    for use in the OpenSSL Toolkit (http://www.OpenSSL.org/)"
- *
- * THIS SOFTWARE IS PROVIDED BY THE OpenSSL PROJECT ``AS IS'' AND ANY
- * EXPRESSED OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
- * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR
- * PURPOSE ARE DISCLAIMED.  IN NO EVENT SHALL THE OpenSSL PROJECT OR
- * ITS CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
- * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
- * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
- * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
- * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
- * STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
- * ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED
- * OF THE POSSIBILITY OF SUCH DAMAGE.
- * ====================================================================
- *
- * This product includes cryptographic software written by Eric Young
- * (eay@cryptsoft.com).  This product includes software written by Tim
- * Hudson (tjh@cryptsoft.com).
- *
- */
-
-/*
-	Why BIO_s_log?
-
-	BIO_s_log is useful for system daemons (or services under NT).
-	It is one-way BIO, it sends all stuff to syslogd (on system that
-	commonly use that), or event log (on NT), or OPCOM (on OpenVMS).
-
-*/
-
-
-#include <stdio.h>
-#include <errno.h>
-
-#include "cryptlib.h"
-
-#if defined(OPENSSL_SYS_WINCE)
-#elif defined(OPENSSL_SYS_WIN32)
-#  include <process.h>
-#elif defined(OPENSSL_SYS_VMS)
-#  include <opcdef.h>
-#  include <descrip.h>
-#  include <lib$routines.h>
-#  include <starlet.h>
-#elif defined(__ultrix)
-#  include <sys/syslog.h>
-#elif defined(OPENSSL_SYS_NETWARE)
-#  define NO_SYSLOG
-#elif (!defined(MSDOS) || defined(WATT32)) && !defined(OPENSSL_SYS_VXWORKS) && !defined(NO_SYSLOG)
-#  include <syslog.h>
-#endif
-
-#include <openssl/buffer.h>
-#include <openssl/err.h>
-
-#ifndef NO_SYSLOG
-
-#if defined(OPENSSL_SYS_WIN32)
-#define LOG_EMERG	0
-#define LOG_ALERT	1
-#define LOG_CRIT	2
-#define LOG_ERR		3
-#define LOG_WARNING	4
-#define LOG_NOTICE	5
-#define LOG_INFO	6
-#define LOG_DEBUG	7
-
-#define LOG_DAEMON	(3<<3)
-#elif defined(OPENSSL_SYS_VMS)
-/* On VMS, we don't really care about these, but we need them to compile */
-#define LOG_EMERG	0
-#define LOG_ALERT	1
-#define LOG_CRIT	2
-#define LOG_ERR		3
-#define LOG_WARNING	4
-#define LOG_NOTICE	5
-#define LOG_INFO	6
-#define LOG_DEBUG	7
-
-#define LOG_DAEMON	OPC$M_NM_NTWORK
-#endif
-
-static int MS_CALLBACK slg_write(BIO *h, const char *buf, int num);
-static int MS_CALLBACK slg_puts(BIO *h, const char *str);
-static long MS_CALLBACK slg_ctrl(BIO *h, int cmd, long arg1, void *arg2);
-static int MS_CALLBACK slg_new(BIO *h);
-static int MS_CALLBACK slg_free(BIO *data);
-static void xopenlog(BIO* bp, char* name, int level);
-static void xsyslog(BIO* bp, int priority, const char* string);
-static void xcloselog(BIO* bp);
-#ifdef OPENSSL_SYS_WIN32
-LONG	(WINAPI *go_for_advapi)()	= RegOpenKeyEx;
-HANDLE	(WINAPI *register_event_source)()	= NULL;
-BOOL	(WINAPI *deregister_event_source)()	= NULL;
-BOOL	(WINAPI *report_event)()	= NULL;
-#define DL_PROC(m,f)	(GetProcAddress( m, f ))
-#ifdef UNICODE
-#define DL_PROC_X(m,f) DL_PROC( m, f "W" )
-#else
-#define DL_PROC_X(m,f) DL_PROC( m, f "A" )
-#endif
-#endif
-
-static BIO_METHOD methods_slg=
-	{
-	BIO_TYPE_MEM,"syslog",
-	slg_write,
-	NULL,
-	slg_puts,
-	NULL,
-	slg_ctrl,
-	slg_new,
-	slg_free,
-	NULL,
-	};
-
-BIO_METHOD *BIO_s_log(void)
-	{
-	return(&methods_slg);
-	}
-
-static int MS_CALLBACK slg_new(BIO *bi)
-	{
-	bi->init=1;
-	bi->num=0;
-	bi->ptr=NULL;
-	xopenlog(bi, "application", LOG_DAEMON);
-	return(1);
-	}
-
-static int MS_CALLBACK slg_free(BIO *a)
-	{
-	if (a == NULL) return(0);
-	xcloselog(a);
-	return(1);
-	}
-	
-static int MS_CALLBACK slg_write(BIO *b, const char *in, int inl)
-	{
-	int ret= inl;
-	char* buf;
-	char* pp;
-	int priority, i;
-	static struct
-		{
-		int strl;
-		char str[10];
-		int log_level;
-		}
-	mapping[] =
-		{
-		{ 6, "PANIC ", LOG_EMERG },
-		{ 6, "EMERG ", LOG_EMERG },
-		{ 4, "EMR ", LOG_EMERG },
-		{ 6, "ALERT ", LOG_ALERT },
-		{ 4, "ALR ", LOG_ALERT },
-		{ 5, "CRIT ", LOG_CRIT },
-		{ 4, "CRI ", LOG_CRIT },
-		{ 6, "ERROR ", LOG_ERR },
-		{ 4, "ERR ", LOG_ERR },
-		{ 8, "WARNING ", LOG_WARNING },
-		{ 5, "WARN ", LOG_WARNING },
-		{ 4, "WAR ", LOG_WARNING },
-		{ 7, "NOTICE ", LOG_NOTICE },
-		{ 5, "NOTE ", LOG_NOTICE },
-		{ 4, "NOT ", LOG_NOTICE },
-		{ 5, "INFO ", LOG_INFO },
-		{ 4, "INF ", LOG_INFO },
-		{ 6, "DEBUG ", LOG_DEBUG },
-		{ 4, "DBG ", LOG_DEBUG },
-		{ 0, "", LOG_ERR } /* The default */
-		};
-
-	if((buf= (char *)OPENSSL_malloc(inl+ 1)) == NULL){
-		return(0);
-	}
-	strncpy(buf, in, inl);
-	buf[inl]= '\0';
-
-	i = 0;
-	while(strncmp(buf, mapping[i].str, mapping[i].strl) != 0) i++;
-	priority = mapping[i].log_level;
-	pp = buf + mapping[i].strl;
-
-	xsyslog(b, priority, pp);
-
-	OPENSSL_free(buf);
-	return(ret);
-	}
-
-static long MS_CALLBACK slg_ctrl(BIO *b, int cmd, long num, void *ptr)
-	{
-	switch (cmd)
-		{
-	case BIO_CTRL_SET:
-		xcloselog(b);
-		xopenlog(b, ptr, num);
-		break;
-	default:
-		break;
-		}
-	return(0);
-	}
-
-static int MS_CALLBACK slg_puts(BIO *bp, const char *str)
-	{
-	int n,ret;
-
-	n=strlen(str);
-	ret=slg_write(bp,str,n);
-	return(ret);
-	}
-
-#if defined(OPENSSL_SYS_WIN32)
-
-static void xopenlog(BIO* bp, char* name, int level)
-{
-	if ( !register_event_source )
-		{
-		HANDLE	advapi;
-		if ( !(advapi = GetModuleHandle("advapi32")) )
-			return;
-		register_event_source = (HANDLE (WINAPI *)())DL_PROC_X(advapi,
-			"RegisterEventSource" );
-		deregister_event_source = (BOOL (WINAPI *)())DL_PROC(advapi,
-			"DeregisterEventSource");
-		report_event = (BOOL (WINAPI *)())DL_PROC_X(advapi,
-			"ReportEvent" );
-		if ( !(register_event_source && deregister_event_source &&
-				report_event) )
-			{
-			register_event_source = NULL;
-			deregister_event_source = NULL;
-			report_event = NULL;
-			return;
-			}
-		}
-	bp->ptr= (char *)register_event_source(NULL, name);
-}
-
-static void xsyslog(BIO *bp, int priority, const char *string)
-{
-	LPCSTR lpszStrings[2];
-	WORD evtype= EVENTLOG_ERROR_TYPE;
-	int pid = _getpid();
-	char pidbuf[DECIMAL_SIZE(pid)+4];
-
-	switch (priority)
-		{
-	case LOG_EMERG:
-	case LOG_ALERT:
-	case LOG_CRIT:
-	case LOG_ERR:
-		evtype = EVENTLOG_ERROR_TYPE;
-		break;
-	case LOG_WARNING:
-		evtype = EVENTLOG_WARNING_TYPE;
-		break;
-	case LOG_NOTICE:
-	case LOG_INFO:
-	case LOG_DEBUG:
-		evtype = EVENTLOG_INFORMATION_TYPE;
-		break;
-	default:		/* Should never happen, but set it
-				   as error anyway. */
-		evtype = EVENTLOG_ERROR_TYPE;
-		break;
-		}
-
-	sprintf(pidbuf, "[%d] ", pid);
-	lpszStrings[0] = pidbuf;
-	lpszStrings[1] = string;
-
-	if(report_event && bp->ptr)
-		report_event(bp->ptr, evtype, 0, 1024, NULL, 2, 0,
-				lpszStrings, NULL);
-}
-	
-static void xcloselog(BIO* bp)
-{
-	if(deregister_event_source && bp->ptr)
-		deregister_event_source((HANDLE)(bp->ptr));
-	bp->ptr= NULL;
-}
-
-#elif defined(OPENSSL_SYS_VMS)
-
-static int VMS_OPC_target = LOG_DAEMON;
-
-static void xopenlog(BIO* bp, char* name, int level)
-{
-	VMS_OPC_target = level; 
-}
-
-static void xsyslog(BIO *bp, int priority, const char *string)
-{
-	struct dsc$descriptor_s opc_dsc;
-	struct opcdef *opcdef_p;
-	char buf[10240];
-	unsigned int len;
-        struct dsc$descriptor_s buf_dsc;
-	$DESCRIPTOR(fao_cmd, "!AZ: !AZ");
-	char *priority_tag;
-
-	switch (priority)
-	  {
-	  case LOG_EMERG: priority_tag = "Emergency"; break;
-	  case LOG_ALERT: priority_tag = "Alert"; break;
-	  case LOG_CRIT: priority_tag = "Critical"; break;
-	  case LOG_ERR: priority_tag = "Error"; break;
-	  case LOG_WARNING: priority_tag = "Warning"; break;
-	  case LOG_NOTICE: priority_tag = "Notice"; break;
-	  case LOG_INFO: priority_tag = "Info"; break;
-	  case LOG_DEBUG: priority_tag = "DEBUG"; break;
-	  }
-
-	buf_dsc.dsc$b_dtype = DSC$K_DTYPE_T;
-	buf_dsc.dsc$b_class = DSC$K_CLASS_S;
-	buf_dsc.dsc$a_pointer = buf;
-	buf_dsc.dsc$w_length = sizeof(buf) - 1;
-
-	lib$sys_fao(&fao_cmd, &len, &buf_dsc, priority_tag, string);
-
-	/* we know there's an 8 byte header.  That's documented */
-	opcdef_p = (struct opcdef *) OPENSSL_malloc(8 + len);
-	opcdef_p->opc$b_ms_type = OPC$_RQ_RQST;
-	memcpy(opcdef_p->opc$z_ms_target_classes, &VMS_OPC_target, 3);
-	opcdef_p->opc$l_ms_rqstid = 0;
-	memcpy(&opcdef_p->opc$l_ms_text, buf, len);
-
-	opc_dsc.dsc$b_dtype = DSC$K_DTYPE_T;
-	opc_dsc.dsc$b_class = DSC$K_CLASS_S;
-	opc_dsc.dsc$a_pointer = (char *)opcdef_p;
-	opc_dsc.dsc$w_length = len + 8;
-
-	sys$sndopr(opc_dsc, 0);
-
-	OPENSSL_free(opcdef_p);
-}
-
-static void xcloselog(BIO* bp)
-{
-}
-
-#else /* Unix/Watt32 */
-
-static void xopenlog(BIO* bp, char* name, int level)
-{
-#ifdef WATT32   /* djgpp/DOS */
-	openlog(name, LOG_PID|LOG_CONS|LOG_NDELAY, level);
-#else
-	openlog(name, LOG_PID|LOG_CONS, level);
-#endif
-}
-
-static void xsyslog(BIO *bp, int priority, const char *string)
-{
-	syslog(priority, "%s", string);
-}
-
-static void xcloselog(BIO* bp)
-{
-	closelog();
-}
-
-#endif /* Unix */
-
-#endif /* NO_SYSLOG */
diff --git a/crypto/openssl/crypto/bio/bss_mem.c b/crypto/openssl/crypto/bio/bss_mem.c
deleted file mode 100644
index a4edb711aec1..000000000000
--- a/crypto/openssl/crypto/bio/bss_mem.c
+++ /dev/null
@@ -1,321 +0,0 @@
-/* crypto/bio/bss_mem.c */
-/* Copyright (C) 1995-1998 Eric Young (eay@cryptsoft.com)
- * All rights reserved.
- *
- * This package is an SSL implementation written
- * by Eric Young (eay@cryptsoft.com).
- * The implementation was written so as to conform with Netscapes SSL.
- * 
- * This library is free for commercial and non-commercial use as long as
- * the following conditions are aheared to.  The following conditions
- * apply to all code found in this distribution, be it the RC4, RSA,
- * lhash, DES, etc., code; not just the SSL code.  The SSL documentation
- * included with this distribution is covered by the same copyright terms
- * except that the holder is Tim Hudson (tjh@cryptsoft.com).
- * 
- * Copyright remains Eric Young's, and as such any Copyright notices in
- * the code are not to be removed.
- * If this package is used in a product, Eric Young should be given attribution
- * as the author of the parts of the library used.
- * This can be in the form of a textual message at program startup or
- * in documentation (online or textual) provided with the package.
- * 
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions
- * are met:
- * 1. Redistributions of source code must retain the copyright
- *    notice, this list of conditions and the following disclaimer.
- * 2. Redistributions in binary form must reproduce the above copyright
- *    notice, this list of conditions and the following disclaimer in the
- *    documentation and/or other materials provided with the distribution.
- * 3. All advertising materials mentioning features or use of this software
- *    must display the following acknowledgement:
- *    "This product includes cryptographic software written by
- *     Eric Young (eay@cryptsoft.com)"
- *    The word 'cryptographic' can be left out if the rouines from the library
- *    being used are not cryptographic related :-).
- * 4. If you include any Windows specific code (or a derivative thereof) from 
- *    the apps directory (application code) you must include an acknowledgement:
- *    "This product includes software written by Tim Hudson (tjh@cryptsoft.com)"
- * 
- * THIS SOFTWARE IS PROVIDED BY ERIC YOUNG ``AS IS'' AND
- * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
- * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
- * ARE DISCLAIMED.  IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE
- * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
- * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
- * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
- * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
- * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
- * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
- * SUCH DAMAGE.
- * 
- * The licence and distribution terms for any publically available version or
- * derivative of this code cannot be changed.  i.e. this code cannot simply be
- * copied and put under another distribution licence
- * [including the GNU Public Licence.]
- */
-
-#include <stdio.h>
-#include <errno.h>
-#include "cryptlib.h"
-#include <openssl/bio.h>
-
-static int mem_write(BIO *h, const char *buf, int num);
-static int mem_read(BIO *h, char *buf, int size);
-static int mem_puts(BIO *h, const char *str);
-static int mem_gets(BIO *h, char *str, int size);
-static long mem_ctrl(BIO *h, int cmd, long arg1, void *arg2);
-static int mem_new(BIO *h);
-static int mem_free(BIO *data);
-static BIO_METHOD mem_method=
-	{
-	BIO_TYPE_MEM,
-	"memory buffer",
-	mem_write,
-	mem_read,
-	mem_puts,
-	mem_gets,
-	mem_ctrl,
-	mem_new,
-	mem_free,
-	NULL,
-	};
-
-/* bio->num is used to hold the value to return on 'empty', if it is
- * 0, should_retry is not set */
-
-BIO_METHOD *BIO_s_mem(void)
-	{
-	return(&mem_method);
-	}
-
-BIO *BIO_new_mem_buf(void *buf, int len)
-{
-	BIO *ret;
-	BUF_MEM *b;
-	if (!buf) {
-		BIOerr(BIO_F_BIO_NEW_MEM_BUF,BIO_R_NULL_PARAMETER);
-		return NULL;
-	}
-	if(len == -1) len = strlen(buf);
-	if(!(ret = BIO_new(BIO_s_mem())) ) return NULL;
-	b = (BUF_MEM *)ret->ptr;
-	b->data = buf;
-	b->length = len;
-	b->max = len;
-	ret->flags |= BIO_FLAGS_MEM_RDONLY;
-	/* Since this is static data retrying wont help */
-	ret->num = 0;
-	return ret;
-}
-
-static int mem_new(BIO *bi)
-	{
-	BUF_MEM *b;
-
-	if ((b=BUF_MEM_new()) == NULL)
-		return(0);
-	bi->shutdown=1;
-	bi->init=1;
-	bi->num= -1;
-	bi->ptr=(char *)b;
-	return(1);
-	}
-
-static int mem_free(BIO *a)
-	{
-	if (a == NULL) return(0);
-	if (a->shutdown)
-		{
-		if ((a->init) && (a->ptr != NULL))
-			{
-			BUF_MEM *b;
-			b = (BUF_MEM *)a->ptr;
-			if(a->flags & BIO_FLAGS_MEM_RDONLY) b->data = NULL;
-			BUF_MEM_free(b);
-			a->ptr=NULL;
-			}
-		}
-	return(1);
-	}
-	
-static int mem_read(BIO *b, char *out, int outl)
-	{
-	int ret= -1;
-	BUF_MEM *bm;
-	int i;
-	char *from,*to;
-
-	bm=(BUF_MEM *)b->ptr;
-	BIO_clear_retry_flags(b);
-	ret=(outl > bm->length)?bm->length:outl;
-	if ((out != NULL) && (ret > 0)) {
-		memcpy(out,bm->data,ret);
-		bm->length-=ret;
-		/* memmove(&(bm->data[0]),&(bm->data[ret]), bm->length); */
-		if(b->flags & BIO_FLAGS_MEM_RDONLY) bm->data += ret;
-		else {
-			from=(char *)&(bm->data[ret]);
-			to=(char *)&(bm->data[0]);
-			for (i=0; i<bm->length; i++)
-				to[i]=from[i];
-		}
-	} else if (bm->length == 0)
-		{
-		ret = b->num;
-		if (ret != 0)
-			BIO_set_retry_read(b);
-		}
-	return(ret);
-	}
-
-static int mem_write(BIO *b, const char *in, int inl)
-	{
-	int ret= -1;
-	int blen;
-	BUF_MEM *bm;
-
-	bm=(BUF_MEM *)b->ptr;
-	if (in == NULL)
-		{
-		BIOerr(BIO_F_MEM_WRITE,BIO_R_NULL_PARAMETER);
-		goto end;
-		}
-
-	if(b->flags & BIO_FLAGS_MEM_RDONLY) {
-		BIOerr(BIO_F_MEM_WRITE,BIO_R_WRITE_TO_READ_ONLY_BIO);
-		goto end;
-	}
-
-	BIO_clear_retry_flags(b);
-	blen=bm->length;
-	if (BUF_MEM_grow_clean(bm,blen+inl) != (blen+inl))
-		goto end;
-	memcpy(&(bm->data[blen]),in,inl);
-	ret=inl;
-end:
-	return(ret);
-	}
-
-static long mem_ctrl(BIO *b, int cmd, long num, void *ptr)
-	{
-	long ret=1;
-	char **pptr;
-
-	BUF_MEM *bm=(BUF_MEM *)b->ptr;
-
-	switch (cmd)
-		{
-	case BIO_CTRL_RESET:
-		if (bm->data != NULL)
-			{
-			/* For read only case reset to the start again */
-			if(b->flags & BIO_FLAGS_MEM_RDONLY) 
-				{
-				bm->data -= bm->max - bm->length;
-				bm->length = bm->max;
-				}
-			else
-				{
-				memset(bm->data,0,bm->max);
-				bm->length=0;
-				}
-			}
-		break;
-	case BIO_CTRL_EOF:
-		ret=(long)(bm->length == 0);
-		break;
-	case BIO_C_SET_BUF_MEM_EOF_RETURN:
-		b->num=(int)num;
-		break;
-	case BIO_CTRL_INFO:
-		ret=(long)bm->length;
-		if (ptr != NULL)
-			{
-			pptr=(char **)ptr;
-			*pptr=(char *)&(bm->data[0]);
-			}
-		break;
-	case BIO_C_SET_BUF_MEM:
-		mem_free(b);
-		b->shutdown=(int)num;
-		b->ptr=ptr;
-		break;
-	case BIO_C_GET_BUF_MEM_PTR:
-		if (ptr != NULL)
-			{
-			pptr=(char **)ptr;
-			*pptr=(char *)bm;
-			}
-		break;
-	case BIO_CTRL_GET_CLOSE:
-		ret=(long)b->shutdown;
-		break;
-	case BIO_CTRL_SET_CLOSE:
-		b->shutdown=(int)num;
-		break;
-
-	case BIO_CTRL_WPENDING:
-		ret=0L;
-		break;
-	case BIO_CTRL_PENDING:
-		ret=(long)bm->length;
-		break;
-	case BIO_CTRL_DUP:
-	case BIO_CTRL_FLUSH:
-		ret=1;
-		break;
-	case BIO_CTRL_PUSH:
-	case BIO_CTRL_POP:
-	default:
-		ret=0;
-		break;
-		}
-	return(ret);
-	}
-
-static int mem_gets(BIO *bp, char *buf, int size)
-	{
-	int i,j;
-	int ret= -1;
-	char *p;
-	BUF_MEM *bm=(BUF_MEM *)bp->ptr;
-
-	BIO_clear_retry_flags(bp);
-	j=bm->length;
-	if (j <= 0)
-		{
-		*buf='\0';
-		return 0;
-		}
-	p=bm->data;
-	for (i=0; i<j; i++)
-		{
-		if (p[i] == '\n') break;
-		}
-	if (i == j)
-		{
-		BIO_set_retry_read(bp);
-		/* return(-1);  change the semantics 0.6.6a */ 
-		}
-	else
-		i++;
-	/* i is the max to copy */
-	if ((size-1) < i) i=size-1;
-	i=mem_read(bp,buf,i);
-	if (i > 0) buf[i]='\0';
-	ret=i;
-	return(ret);
-	}
-
-static int mem_puts(BIO *bp, const char *str)
-	{
-	int n,ret;
-
-	n=strlen(str);
-	ret=mem_write(bp,str,n);
-	/* memory semantics is that it will always work */
-	return(ret);
-	}
-
diff --git a/crypto/openssl/crypto/bio/bss_null.c b/crypto/openssl/crypto/bio/bss_null.c
deleted file mode 100644
index 46b73339dff8..000000000000
--- a/crypto/openssl/crypto/bio/bss_null.c
+++ /dev/null
@@ -1,150 +0,0 @@
-/* crypto/bio/bss_null.c */
-/* Copyright (C) 1995-1998 Eric Young (eay@cryptsoft.com)
- * All rights reserved.
- *
- * This package is an SSL implementation written
- * by Eric Young (eay@cryptsoft.com).
- * The implementation was written so as to conform with Netscapes SSL.
- * 
- * This library is free for commercial and non-commercial use as long as
- * the following conditions are aheared to.  The following conditions
- * apply to all code found in this distribution, be it the RC4, RSA,
- * lhash, DES, etc., code; not just the SSL code.  The SSL documentation
- * included with this distribution is covered by the same copyright terms
- * except that the holder is Tim Hudson (tjh@cryptsoft.com).
- * 
- * Copyright remains Eric Young's, and as such any Copyright notices in
- * the code are not to be removed.
- * If this package is used in a product, Eric Young should be given attribution
- * as the author of the parts of the library used.
- * This can be in the form of a textual message at program startup or
- * in documentation (online or textual) provided with the package.
- * 
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions
- * are met:
- * 1. Redistributions of source code must retain the copyright
- *    notice, this list of conditions and the following disclaimer.
- * 2. Redistributions in binary form must reproduce the above copyright
- *    notice, this list of conditions and the following disclaimer in the
- *    documentation and/or other materials provided with the distribution.
- * 3. All advertising materials mentioning features or use of this software
- *    must display the following acknowledgement:
- *    "This product includes cryptographic software written by
- *     Eric Young (eay@cryptsoft.com)"
- *    The word 'cryptographic' can be left out if the rouines from the library
- *    being used are not cryptographic related :-).
- * 4. If you include any Windows specific code (or a derivative thereof) from 
- *    the apps directory (application code) you must include an acknowledgement:
- *    "This product includes software written by Tim Hudson (tjh@cryptsoft.com)"
- * 
- * THIS SOFTWARE IS PROVIDED BY ERIC YOUNG ``AS IS'' AND
- * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
- * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
- * ARE DISCLAIMED.  IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE
- * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
- * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
- * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
- * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
- * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
- * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
- * SUCH DAMAGE.
- * 
- * The licence and distribution terms for any publically available version or
- * derivative of this code cannot be changed.  i.e. this code cannot simply be
- * copied and put under another distribution licence
- * [including the GNU Public Licence.]
- */
-
-#include <stdio.h>
-#include <errno.h>
-#include "cryptlib.h"
-#include <openssl/bio.h>
-
-static int null_write(BIO *h, const char *buf, int num);
-static int null_read(BIO *h, char *buf, int size);
-static int null_puts(BIO *h, const char *str);
-static int null_gets(BIO *h, char *str, int size);
-static long null_ctrl(BIO *h, int cmd, long arg1, void *arg2);
-static int null_new(BIO *h);
-static int null_free(BIO *data);
-static BIO_METHOD null_method=
-	{
-	BIO_TYPE_NULL,
-	"NULL",
-	null_write,
-	null_read,
-	null_puts,
-	null_gets,
-	null_ctrl,
-	null_new,
-	null_free,
-	NULL,
-	};
-
-BIO_METHOD *BIO_s_null(void)
-	{
-	return(&null_method);
-	}
-
-static int null_new(BIO *bi)
-	{
-	bi->init=1;
-	bi->num=0;
-	bi->ptr=(NULL);
-	return(1);
-	}
-
-static int null_free(BIO *a)
-	{
-	if (a == NULL) return(0);
-	return(1);
-	}
-	
-static int null_read(BIO *b, char *out, int outl)
-	{
-	return(0);
-	}
-
-static int null_write(BIO *b, const char *in, int inl)
-	{
-	return(inl);
-	}
-
-static long null_ctrl(BIO *b, int cmd, long num, void *ptr)
-	{
-	long ret=1;
-
-	switch (cmd)
-		{
-	case BIO_CTRL_RESET:
-	case BIO_CTRL_EOF:
-	case BIO_CTRL_SET:
-	case BIO_CTRL_SET_CLOSE:
-	case BIO_CTRL_FLUSH:
-	case BIO_CTRL_DUP:
-		ret=1;
-		break;
-	case BIO_CTRL_GET_CLOSE:
-	case BIO_CTRL_INFO:
-	case BIO_CTRL_GET:
-	case BIO_CTRL_PENDING:
-	case BIO_CTRL_WPENDING:
-	default:
-		ret=0;
-		break;
-		}
-	return(ret);
-	}
-
-static int null_gets(BIO *bp, char *buf, int size)
-	{
-	return(0);
-	}
-
-static int null_puts(BIO *bp, const char *str)
-	{
-	if (str == NULL) return(0);
-	return(strlen(str));
-	}
-
diff --git a/crypto/openssl/crypto/bio/bss_rtcp.c b/crypto/openssl/crypto/bio/bss_rtcp.c
deleted file mode 100644
index 7dae48556406..000000000000
--- a/crypto/openssl/crypto/bio/bss_rtcp.c
+++ /dev/null
@@ -1,294 +0,0 @@
-/* crypto/bio/bss_rtcp.c */
-/* Copyright (C) 1995-1998 Eric Young (eay@cryptsoft.com)
- * All rights reserved.
- *
- * This package is an SSL implementation written
- * by Eric Young (eay@cryptsoft.com).
- * The implementation was written so as to conform with Netscapes SSL.
- * 
- * This library is free for commercial and non-commercial use as long as
- * the following conditions are aheared to.  The following conditions
- * apply to all code found in this distribution, be it the RC4, RSA,
- * lhash, DES, etc., code; not just the SSL code.  The SSL documentation
- * included with this distribution is covered by the same copyright terms
- * except that the holder is Tim Hudson (tjh@cryptsoft.com).
- * 
- * Copyright remains Eric Young's, and as such any Copyright notices in
- * the code are not to be removed.
- * If this package is used in a product, Eric Young should be given attribution
- * as the author of the parts of the library used.
- * This can be in the form of a textual message at program startup or
- * in documentation (online or textual) provided with the package.
- * 
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions
- * are met:
- * 1. Redistributions of source code must retain the copyright
- *    notice, this list of conditions and the following disclaimer.
- * 2. Redistributions in binary form must reproduce the above copyright
- *    notice, this list of conditions and the following disclaimer in the
- *    documentation and/or other materials provided with the distribution.
- * 3. All advertising materials mentioning features or use of this software
- *    must display the following acknowledgement:
- *    "This product includes cryptographic software written by
- *     Eric Young (eay@cryptsoft.com)"
- *    The word 'cryptographic' can be left out if the rouines from the library
- *    being used are not cryptographic related :-).
- * 4. If you include any Windows specific code (or a derivative thereof) from 
- *    the apps directory (application code) you must include an acknowledgement:
- *    "This product includes software written by Tim Hudson (tjh@cryptsoft.com)"
- * 
- * THIS SOFTWARE IS PROVIDED BY ERIC YOUNG ``AS IS'' AND
- * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
- * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
- * ARE DISCLAIMED.  IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE
- * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
- * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
- * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
- * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
- * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
- * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
- * SUCH DAMAGE.
- * 
- * The licence and distribution terms for any publically available version or
- * derivative of this code cannot be changed.  i.e. this code cannot simply be
- * copied and put under another distribution licence
- * [including the GNU Public Licence.]
- */
-
-/* Written by David L. Jones <jonesd@kcgl1.eng.ohio-state.edu>
- * Date:   22-JUL-1996
- * Revised: 25-SEP-1997		Update for 0.8.1, BIO_CTRL_SET -> BIO_C_SET_FD
- */
-/* VMS */
-#include <stdio.h>
-#include <stdlib.h>
-#include <string.h>
-#include <errno.h>
-#include "cryptlib.h"
-#include <openssl/bio.h>
-
-#include <iodef.h>		/* VMS IO$_ definitions */
-#include <starlet.h>
-
-typedef unsigned short io_channel;
-/*************************************************************************/
-struct io_status { short status, count; long flags; };
-
-struct rpc_msg {		/* Should have member alignment inhibited */
-   char channel;		/* 'A'-app data. 'R'-remote client 'G'-global */
-   char function;		/* 'G'-get, 'P'-put, 'C'-confirm, 'X'-close */
-   unsigned short int length;	/* Amount of data returned or max to return */
-   char data[4092];		/* variable data */
-};
-#define RPC_HDR_SIZE (sizeof(struct rpc_msg) - 4092)
-
-struct rpc_ctx {
-    int filled, pos;
-    struct rpc_msg msg;
-};
-
-static int rtcp_write(BIO *h,const char *buf,int num);
-static int rtcp_read(BIO *h,char *buf,int size);
-static int rtcp_puts(BIO *h,const char *str);
-static int rtcp_gets(BIO *h,char *str,int size);
-static long rtcp_ctrl(BIO *h,int cmd,long arg1,void *arg2);
-static int rtcp_new(BIO *h);
-static int rtcp_free(BIO *data);
-
-static BIO_METHOD rtcp_method=
-	{
-	BIO_TYPE_FD,
-	"RTCP",
-	rtcp_write,
-	rtcp_read,
-	rtcp_puts,
-	rtcp_gets,
-	rtcp_ctrl,
-	rtcp_new,
-	rtcp_free,
-	NULL,
-	};
-
-BIO_METHOD *BIO_s_rtcp(void)
-	{
-	return(&rtcp_method);
-	}
-/*****************************************************************************/
-/* Decnet I/O routines.
- */
-
-#ifdef __DECC
-#pragma message save
-#pragma message disable DOLLARID
-#endif
-
-static int get ( io_channel chan, char *buffer, int maxlen, int *length )
-{
-    int status;
-    struct io_status iosb;
-    status = sys$qiow ( 0, chan, IO$_READVBLK, &iosb, 0, 0,
-	buffer, maxlen, 0, 0, 0, 0 );
-    if ( (status&1) == 1 ) status = iosb.status;
-    if ( (status&1) == 1 ) *length = iosb.count;
-    return status;
-}
-
-static int put ( io_channel chan, char *buffer, int length )
-{
-    int status;
-    struct io_status iosb;
-    status = sys$qiow ( 0, chan, IO$_WRITEVBLK, &iosb, 0, 0,
-	buffer, length, 0, 0, 0, 0 );
-    if ( (status&1) == 1 ) status = iosb.status;
-    return status;
-}
-
-#ifdef __DECC
-#pragma message restore
-#endif
-
-/***************************************************************************/
-
-static int rtcp_new(BIO *bi)
-{
-    struct rpc_ctx *ctx;
-	bi->init=1;
-	bi->num=0;
-	bi->flags = 0;
-	bi->ptr=OPENSSL_malloc(sizeof(struct rpc_ctx));
-	ctx = (struct rpc_ctx *) bi->ptr;
-	ctx->filled = 0;
-	ctx->pos = 0;
-	return(1);
-}
-
-static int rtcp_free(BIO *a)
-{
-	if (a == NULL) return(0);
-	if ( a->ptr ) OPENSSL_free ( a->ptr );
-	a->ptr = NULL;
-	return(1);
-}
-	
-static int rtcp_read(BIO *b, char *out, int outl)
-{
-    int status, length;
-    struct rpc_ctx *ctx;
-    /*
-     * read data, return existing.
-     */
-    ctx = (struct rpc_ctx *) b->ptr;
-    if ( ctx->pos < ctx->filled ) {
-	length = ctx->filled - ctx->pos;
-	if ( length > outl ) length = outl;
-	memmove ( out, &ctx->msg.data[ctx->pos], length );
-	ctx->pos += length;
-	return length;
-    }
-    /*
-     * Requst more data from R channel.
-     */
-    ctx->msg.channel = 'R';
-    ctx->msg.function = 'G';
-    ctx->msg.length = sizeof(ctx->msg.data);
-    status = put ( b->num, (char *) &ctx->msg, RPC_HDR_SIZE );
-    if ( (status&1) == 0 ) {
-	return -1;
-    }
-    /*
-     * Read.
-     */
-    ctx->pos = ctx->filled = 0;
-    status = get ( b->num, (char *) &ctx->msg, sizeof(ctx->msg), &length );
-    if ( (status&1) == 0 ) length = -1;
-    if ( ctx->msg.channel != 'R' || ctx->msg.function != 'C' ) {
-	length = -1;
-    }
-    ctx->filled = length - RPC_HDR_SIZE;
-    
-    if ( ctx->pos < ctx->filled ) {
-	length = ctx->filled - ctx->pos;
-	if ( length > outl ) length = outl;
-	memmove ( out, ctx->msg.data, length );
-	ctx->pos += length;
-	return length;
-    }
-
-    return length;
-}
-
-static int rtcp_write(BIO *b, const char *in, int inl)
-{
-    int status, i, segment, length;
-    struct rpc_ctx *ctx;
-    /*
-     * Output data, send in chunks no larger that sizeof(ctx->msg.data).
-     */
-    ctx = (struct rpc_ctx *) b->ptr;
-    for ( i = 0; i < inl; i += segment ) {
-	segment = inl - i;
-	if ( segment > sizeof(ctx->msg.data) ) segment = sizeof(ctx->msg.data);
-	ctx->msg.channel = 'R';
-	ctx->msg.function = 'P';
-	ctx->msg.length = segment;
-	memmove ( ctx->msg.data, &in[i], segment );
-	status = put ( b->num, (char *) &ctx->msg, segment + RPC_HDR_SIZE );
-	if ((status&1) == 0 ) { i = -1; break; }
-
-	status = get ( b->num, (char *) &ctx->msg, sizeof(ctx->msg), &length );
-	if ( ((status&1) == 0) || (length < RPC_HDR_SIZE) ) { i = -1; break; }
-	if ( (ctx->msg.channel != 'R') || (ctx->msg.function != 'C') ) {
-	   printf("unexpected response when confirming put %c %c\n",
-		ctx->msg.channel, ctx->msg.function );
-
-	}
-    }
-    return(i);
-}
-
-static long rtcp_ctrl(BIO *b, int cmd, long num, void *ptr)
-	{
-	long ret=1;
-
-	switch (cmd)
-		{
-	case BIO_CTRL_RESET:
-	case BIO_CTRL_EOF:
-		ret = 1;
-		break;
-	case BIO_C_SET_FD:
-		b->num = num;
-		ret = 1;
-	 	break;
-	case BIO_CTRL_SET_CLOSE:
-	case BIO_CTRL_FLUSH:
-	case BIO_CTRL_DUP:
-		ret=1;
-		break;
-	case BIO_CTRL_GET_CLOSE:
-	case BIO_CTRL_INFO:
-	case BIO_CTRL_GET:
-	case BIO_CTRL_PENDING:
-	case BIO_CTRL_WPENDING:
-	default:
-		ret=0;
-		break;
-		}
-	return(ret);
-	}
-
-static int rtcp_gets(BIO *bp, char *buf, int size)
-	{
-	return(0);
-	}
-
-static int rtcp_puts(BIO *bp, const char *str)
-{
-    int length;
-    if (str == NULL) return(0);
-    length = strlen ( str );
-    if ( length == 0 ) return (0);
-    return rtcp_write ( bp,str, length );
-}
-
diff --git a/crypto/openssl/crypto/bio/bss_sock.c b/crypto/openssl/crypto/bio/bss_sock.c
deleted file mode 100644
index 472dd75821c5..000000000000
--- a/crypto/openssl/crypto/bio/bss_sock.c
+++ /dev/null
@@ -1,302 +0,0 @@
-/* crypto/bio/bss_sock.c */
-/* Copyright (C) 1995-1998 Eric Young (eay@cryptsoft.com)
- * All rights reserved.
- *
- * This package is an SSL implementation written
- * by Eric Young (eay@cryptsoft.com).
- * The implementation was written so as to conform with Netscapes SSL.
- * 
- * This library is free for commercial and non-commercial use as long as
- * the following conditions are aheared to.  The following conditions
- * apply to all code found in this distribution, be it the RC4, RSA,
- * lhash, DES, etc., code; not just the SSL code.  The SSL documentation
- * included with this distribution is covered by the same copyright terms
- * except that the holder is Tim Hudson (tjh@cryptsoft.com).
- * 
- * Copyright remains Eric Young's, and as such any Copyright notices in
- * the code are not to be removed.
- * If this package is used in a product, Eric Young should be given attribution
- * as the author of the parts of the library used.
- * This can be in the form of a textual message at program startup or
- * in documentation (online or textual) provided with the package.
- * 
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions
- * are met:
- * 1. Redistributions of source code must retain the copyright
- *    notice, this list of conditions and the following disclaimer.
- * 2. Redistributions in binary form must reproduce the above copyright
- *    notice, this list of conditions and the following disclaimer in the
- *    documentation and/or other materials provided with the distribution.
- * 3. All advertising materials mentioning features or use of this software
- *    must display the following acknowledgement:
- *    "This product includes cryptographic software written by
- *     Eric Young (eay@cryptsoft.com)"
- *    The word 'cryptographic' can be left out if the rouines from the library
- *    being used are not cryptographic related :-).
- * 4. If you include any Windows specific code (or a derivative thereof) from 
- *    the apps directory (application code) you must include an acknowledgement:
- *    "This product includes software written by Tim Hudson (tjh@cryptsoft.com)"
- * 
- * THIS SOFTWARE IS PROVIDED BY ERIC YOUNG ``AS IS'' AND
- * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
- * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
- * ARE DISCLAIMED.  IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE
- * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
- * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
- * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
- * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
- * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
- * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
- * SUCH DAMAGE.
- * 
- * The licence and distribution terms for any publically available version or
- * derivative of this code cannot be changed.  i.e. this code cannot simply be
- * copied and put under another distribution licence
- * [including the GNU Public Licence.]
- */
-
-#include <stdio.h>
-#include <errno.h>
-#define USE_SOCKETS
-#include "cryptlib.h"
-#include <openssl/bio.h>
-
-#ifdef WATT32
-#define sock_write SockWrite  /* Watt-32 uses same names */
-#define sock_read  SockRead
-#define sock_puts  SockPuts
-#endif
-
-static int sock_write(BIO *h, const char *buf, int num);
-static int sock_read(BIO *h, char *buf, int size);
-static int sock_puts(BIO *h, const char *str);
-static long sock_ctrl(BIO *h, int cmd, long arg1, void *arg2);
-static int sock_new(BIO *h);
-static int sock_free(BIO *data);
-int BIO_sock_should_retry(int s);
-
-static BIO_METHOD methods_sockp=
-	{
-	BIO_TYPE_SOCKET,
-	"socket",
-	sock_write,
-	sock_read,
-	sock_puts,
-	NULL, /* sock_gets, */
-	sock_ctrl,
-	sock_new,
-	sock_free,
-	NULL,
-	};
-
-BIO_METHOD *BIO_s_socket(void)
-	{
-	return(&methods_sockp);
-	}
-
-BIO *BIO_new_socket(int fd, int close_flag)
-	{
-	BIO *ret;
-
-	ret=BIO_new(BIO_s_socket());
-	if (ret == NULL) return(NULL);
-	BIO_set_fd(ret,fd,close_flag);
-	return(ret);
-	}
-
-static int sock_new(BIO *bi)
-	{
-	bi->init=0;
-	bi->num=0;
-	bi->ptr=NULL;
-	bi->flags=0;
-	return(1);
-	}
-
-static int sock_free(BIO *a)
-	{
-	if (a == NULL) return(0);
-	if (a->shutdown)
-		{
-		if (a->init)
-			{
-			SHUTDOWN2(a->num);
-			}
-		a->init=0;
-		a->flags=0;
-		}
-	return(1);
-	}
-	
-static int sock_read(BIO *b, char *out, int outl)
-	{
-	int ret=0;
-
-	if (out != NULL)
-		{
-		clear_socket_error();
-		ret=readsocket(b->num,out,outl);
-		BIO_clear_retry_flags(b);
-		if (ret <= 0)
-			{
-			if (BIO_sock_should_retry(ret))
-				BIO_set_retry_read(b);
-			}
-		}
-	return(ret);
-	}
-
-static int sock_write(BIO *b, const char *in, int inl)
-	{
-	int ret;
-	
-	clear_socket_error();
-	ret=writesocket(b->num,in,inl);
-	BIO_clear_retry_flags(b);
-	if (ret <= 0)
-		{
-		if (BIO_sock_should_retry(ret))
-			BIO_set_retry_write(b);
-		}
-	return(ret);
-	}
-
-static long sock_ctrl(BIO *b, int cmd, long num, void *ptr)
-	{
-	long ret=1;
-	int *ip;
-
-	switch (cmd)
-		{
-	case BIO_CTRL_RESET:
-		num=0;
-	case BIO_C_FILE_SEEK:
-		ret=0;
-		break;
-	case BIO_C_FILE_TELL:
-	case BIO_CTRL_INFO:
-		ret=0;
-		break;
-	case BIO_C_SET_FD:
-		sock_free(b);
-		b->num= *((int *)ptr);
-		b->shutdown=(int)num;
-		b->init=1;
-		break;
-	case BIO_C_GET_FD:
-		if (b->init)
-			{
-			ip=(int *)ptr;
-			if (ip != NULL) *ip=b->num;
-			ret=b->num;
-			}
-		else
-			ret= -1;
-		break;
-	case BIO_CTRL_GET_CLOSE:
-		ret=b->shutdown;
-		break;
-	case BIO_CTRL_SET_CLOSE:
-		b->shutdown=(int)num;
-		break;
-	case BIO_CTRL_PENDING:
-	case BIO_CTRL_WPENDING:
-		ret=0;
-		break;
-	case BIO_CTRL_DUP:
-	case BIO_CTRL_FLUSH:
-		ret=1;
-		break;
-	default:
-		ret=0;
-		break;
-		}
-	return(ret);
-	}
-
-static int sock_puts(BIO *bp, const char *str)
-	{
-	int n,ret;
-
-	n=strlen(str);
-	ret=sock_write(bp,str,n);
-	return(ret);
-	}
-
-int BIO_sock_should_retry(int i)
-	{
-	int err;
-
-	if ((i == 0) || (i == -1))
-		{
-		err=get_last_socket_error();
-
-#if defined(OPENSSL_SYS_WINDOWS) && 0 /* more microsoft stupidity? perhaps not? Ben 4/1/99 */
-		if ((i == -1) && (err == 0))
-			return(1);
-#endif
-
-		return(BIO_sock_non_fatal_error(err));
-		}
-	return(0);
-	}
-
-int BIO_sock_non_fatal_error(int err)
-	{
-	switch (err)
-		{
-#if defined(OPENSSL_SYS_WINDOWS) || defined(OPENSSL_SYS_NETWARE)
-# if defined(WSAEWOULDBLOCK)
-	case WSAEWOULDBLOCK:
-# endif
-
-# if 0 /* This appears to always be an error */
-#  if defined(WSAENOTCONN)
-	case WSAENOTCONN:
-#  endif
-# endif
-#endif
-
-#ifdef EWOULDBLOCK
-# ifdef WSAEWOULDBLOCK
-#  if WSAEWOULDBLOCK != EWOULDBLOCK
-	case EWOULDBLOCK:
-#  endif
-# else
-	case EWOULDBLOCK:
-# endif
-#endif
-
-#if defined(ENOTCONN)
-	case ENOTCONN:
-#endif
-
-#ifdef EINTR
-	case EINTR:
-#endif
-
-#ifdef EAGAIN
-# if EWOULDBLOCK != EAGAIN
-	case EAGAIN:
-# endif
-#endif
-
-#ifdef EPROTO
-	case EPROTO:
-#endif
-
-#ifdef EINPROGRESS
-	case EINPROGRESS:
-#endif
-
-#ifdef EALREADY
-	case EALREADY:
-#endif
-		return(1);
-		/* break; */
-	default:
-		break;
-		}
-	return(0);
-	}
diff --git a/crypto/openssl/crypto/bn/Makefile b/crypto/openssl/crypto/bn/Makefile
deleted file mode 100644
index 5c3e08fa8085..000000000000
--- a/crypto/openssl/crypto/bn/Makefile
+++ /dev/null
@@ -1,343 +0,0 @@
-#
-# OpenSSL/crypto/bn/Makefile
-#
-
-DIR=	bn
-TOP=	../..
-CC=	cc
-CPP=    $(CC) -E
-INCLUDES= -I.. -I$(TOP) -I../../include
-CFLAG=-g
-MAKEFILE=	Makefile
-AR=		ar r
-
-BN_ASM=		bn_asm.o
-# or use
-#BN_ASM=	bn86-elf.o
-
-CFLAGS= $(INCLUDES) $(CFLAG)
-ASFLAGS= $(INCLUDES) $(ASFLAG)
-AFLAGS= $(ASFLAGS)
-
-GENERAL=Makefile
-TEST=bntest.c exptest.c
-APPS=
-
-LIB=$(TOP)/libcrypto.a
-LIBSRC=	bn_add.c bn_div.c bn_exp.c bn_lib.c bn_ctx.c bn_mul.c bn_mod.c \
-	bn_print.c bn_rand.c bn_shift.c bn_word.c bn_blind.c \
-	bn_kron.c bn_sqrt.c bn_gcd.c bn_prime.c bn_err.c bn_sqr.c bn_asm.c \
-	bn_recp.c bn_mont.c bn_mpi.c bn_exp2.c bn_gf2m.c bn_nist.c \
-	bn_depr.c bn_const.c
-
-LIBOBJ=	bn_add.o bn_div.o bn_exp.o bn_lib.o bn_ctx.o bn_mul.o bn_mod.o \
-	bn_print.o bn_rand.o bn_shift.o bn_word.o bn_blind.o \
-	bn_kron.o bn_sqrt.o bn_gcd.o bn_prime.o bn_err.o bn_sqr.o $(BN_ASM) \
-	bn_recp.o bn_mont.o bn_mpi.o bn_exp2.o bn_gf2m.o bn_nist.o \
-	bn_depr.o bn_const.o
-
-SRC= $(LIBSRC)
-
-EXHEADER= bn.h
-HEADER=	bn_lcl.h bn_prime.h $(EXHEADER)
-
-ALL=    $(GENERAL) $(SRC) $(HEADER)
-
-top:
-	(cd ../..; $(MAKE) DIRS=crypto SDIRS=$(DIR) sub_all)
-
-all:	lib
-
-bn_prime.h: bn_prime.pl
-	$(PERL) bn_prime.pl >bn_prime.h
-
-divtest: divtest.c ../../libcrypto.a
-	cc -I../../include divtest.c -o divtest ../../libcrypto.a
-
-bnbug: bnbug.c ../../libcrypto.a top
-	cc -g -I../../include bnbug.c -o bnbug ../../libcrypto.a
-
-lib:	$(LIBOBJ)
-	$(AR) $(LIB) $(LIBOBJ)
-	$(RANLIB) $(LIB) || echo Never mind.
-	@touch lib
-
-# ELF
-bn86-elf.s:	asm/bn-586.pl ../perlasm/x86asm.pl
-	(cd asm; $(PERL) bn-586.pl elf $(CFLAGS) > ../$@)
-co86-elf.s:	asm/co-586.pl ../perlasm/x86asm.pl
-	(cd asm; $(PERL) co-586.pl elf $(CFLAGS) > ../$@)
-# COFF
-bn86-cof.s: asm/bn-586.pl ../perlasm/x86asm.pl
-	(cd asm; $(PERL) bn-586.pl coff $(CFLAGS) > ../$@)
-co86-cof.s: asm/co-586.pl ../perlasm/x86asm.pl
-	(cd asm; $(PERL) co-586.pl coff $(CFLAGS) > ../$@)
-# a.out
-bn86-out.s: asm/bn-586.pl ../perlasm/x86asm.pl
-	(cd asm; $(PERL) bn-586.pl a.out $(CFLAGS) > ../$@)
-co86-out.s: asm/co-586.pl ../perlasm/x86asm.pl
-	(cd asm; $(PERL) co-586.pl a.out $(CFLAGS) > ../$@)
-
-sparcv8.o:	asm/sparcv8.S
-	$(CC) $(CFLAGS) -c asm/sparcv8.S
-sparcv8plus.o:	asm/sparcv8plus.S
-	$(CC) $(CFLAGS) -c asm/sparcv8plus.S
-
-bn-mips3.o:	asm/mips3.s
-	@if [ "$(CC)" = "gcc" ]; then \
-		ABI=`expr "$(CFLAGS)" : ".*-mabi=\([n3264]*\)"` && \
-		as -$$ABI -O -o $@ asm/mips3.s; \
-	else	$(CC) -c $(CFLAGS) -o $@ asm/mips3.s; fi
-
-x86_64-gcc.o:	asm/x86_64-gcc.c
-	$(CC) $(CFLAGS) -c -o $@ asm/x86_64-gcc.c
-
-bn-ia64.s:	asm/ia64.S
-	$(CC) $(CFLAGS) -E asm/ia64.S > $@
-
-# GNU assembler fails to compile PA-RISC2 modules, insist on calling
-# vendor assembler...
-pa-risc2W.o: asm/pa-risc2W.s
-	/usr/ccs/bin/as -o pa-risc2W.o asm/pa-risc2W.s
-pa-risc2.o: asm/pa-risc2.s
-	/usr/ccs/bin/as -o pa-risc2.o asm/pa-risc2.s
-
-# ppc - AIX, Linux, MacOS X...
-linux_ppc32.s: asm/ppc.pl;	$(PERL) $< $@
-linux_ppc64.s: asm/ppc.pl;	$(PERL) $< $@
-aix_ppc32.s: asm/ppc.pl;	$(PERL) asm/ppc.pl $@
-aix_ppc64.s: asm/ppc.pl;	$(PERL) asm/ppc.pl $@
-osx_ppc32.s: asm/ppc.pl;	$(PERL) $< $@
-
-files:
-	$(PERL) $(TOP)/util/files.pl Makefile >> $(TOP)/MINFO
-
-links:
-	@$(PERL) $(TOP)/util/mklink.pl ../../include/openssl $(EXHEADER)
-	@$(PERL) $(TOP)/util/mklink.pl ../../test $(TEST)
-	@$(PERL) $(TOP)/util/mklink.pl ../../apps $(APPS)
-
-install:
-	@[ -n "$(INSTALLTOP)" ] # should be set by top Makefile...
-	@headerlist="$(EXHEADER)"; for i in $$headerlist ; \
-	do  \
-	(cp $$i $(INSTALL_PREFIX)$(INSTALLTOP)/include/openssl/$$i; \
-	chmod 644 $(INSTALL_PREFIX)$(INSTALLTOP)/include/openssl/$$i ); \
-	done;
-
-exptest:
-	rm -f exptest
-	gcc -I../../include -g2 -ggdb -o exptest exptest.c ../../libcrypto.a
-
-div:
-	rm -f a.out
-	gcc -I.. -g div.c ../../libcrypto.a
-
-tags:
-	ctags $(SRC)
-
-tests:
-
-lint:
-	lint -DLINT $(INCLUDES) $(SRC)>fluff
-
-depend:
-	@[ -n "$(MAKEDEPEND)" ] # should be set by upper Makefile...
-	$(MAKEDEPEND) -- $(CFLAG) $(INCLUDES) $(DEPFLAG) -- $(PROGS) $(LIBSRC)
-
-dclean:
-	$(PERL) -pe 'if (/^# DO NOT DELETE THIS LINE/) {print; exit(0);}' $(MAKEFILE) >Makefile.new
-	mv -f Makefile.new $(MAKEFILE)
-
-clean:
-	rm -f *.s *.o *.obj lib tags core .pure .nfs* *.old *.bak fluff
-
-# DO NOT DELETE THIS LINE -- make depend depends on it.
-
-bn_add.o: ../../e_os.h ../../include/openssl/bio.h ../../include/openssl/bn.h
-bn_add.o: ../../include/openssl/buffer.h ../../include/openssl/crypto.h
-bn_add.o: ../../include/openssl/e_os2.h ../../include/openssl/err.h
-bn_add.o: ../../include/openssl/lhash.h ../../include/openssl/opensslconf.h
-bn_add.o: ../../include/openssl/opensslv.h ../../include/openssl/ossl_typ.h
-bn_add.o: ../../include/openssl/safestack.h ../../include/openssl/stack.h
-bn_add.o: ../../include/openssl/symhacks.h ../cryptlib.h bn_add.c bn_lcl.h
-bn_asm.o: ../../e_os.h ../../include/openssl/bio.h ../../include/openssl/bn.h
-bn_asm.o: ../../include/openssl/buffer.h ../../include/openssl/crypto.h
-bn_asm.o: ../../include/openssl/e_os2.h ../../include/openssl/err.h
-bn_asm.o: ../../include/openssl/lhash.h ../../include/openssl/opensslconf.h
-bn_asm.o: ../../include/openssl/opensslv.h ../../include/openssl/ossl_typ.h
-bn_asm.o: ../../include/openssl/safestack.h ../../include/openssl/stack.h
-bn_asm.o: ../../include/openssl/symhacks.h ../cryptlib.h bn_asm.c bn_lcl.h
-bn_blind.o: ../../e_os.h ../../include/openssl/bio.h ../../include/openssl/bn.h
-bn_blind.o: ../../include/openssl/buffer.h ../../include/openssl/crypto.h
-bn_blind.o: ../../include/openssl/e_os2.h ../../include/openssl/err.h
-bn_blind.o: ../../include/openssl/lhash.h ../../include/openssl/opensslconf.h
-bn_blind.o: ../../include/openssl/opensslv.h ../../include/openssl/ossl_typ.h
-bn_blind.o: ../../include/openssl/safestack.h ../../include/openssl/stack.h
-bn_blind.o: ../../include/openssl/symhacks.h ../cryptlib.h bn_blind.c bn_lcl.h
-bn_const.o: ../../include/openssl/e_os2.h ../../include/openssl/opensslconf.h
-bn_const.o: ../../include/openssl/ossl_typ.h bn.h bn_const.c
-bn_ctx.o: ../../e_os.h ../../include/openssl/bio.h ../../include/openssl/bn.h
-bn_ctx.o: ../../include/openssl/buffer.h ../../include/openssl/crypto.h
-bn_ctx.o: ../../include/openssl/e_os2.h ../../include/openssl/err.h
-bn_ctx.o: ../../include/openssl/lhash.h ../../include/openssl/opensslconf.h
-bn_ctx.o: ../../include/openssl/opensslv.h ../../include/openssl/ossl_typ.h
-bn_ctx.o: ../../include/openssl/safestack.h ../../include/openssl/stack.h
-bn_ctx.o: ../../include/openssl/symhacks.h ../cryptlib.h bn_ctx.c bn_lcl.h
-bn_depr.o: ../../e_os.h ../../include/openssl/bio.h ../../include/openssl/bn.h
-bn_depr.o: ../../include/openssl/buffer.h ../../include/openssl/crypto.h
-bn_depr.o: ../../include/openssl/e_os2.h ../../include/openssl/err.h
-bn_depr.o: ../../include/openssl/lhash.h ../../include/openssl/opensslconf.h
-bn_depr.o: ../../include/openssl/opensslv.h ../../include/openssl/ossl_typ.h
-bn_depr.o: ../../include/openssl/rand.h ../../include/openssl/safestack.h
-bn_depr.o: ../../include/openssl/stack.h ../../include/openssl/symhacks.h
-bn_depr.o: ../cryptlib.h bn_depr.c bn_lcl.h
-bn_div.o: ../../e_os.h ../../include/openssl/bio.h ../../include/openssl/bn.h
-bn_div.o: ../../include/openssl/buffer.h ../../include/openssl/crypto.h
-bn_div.o: ../../include/openssl/e_os2.h ../../include/openssl/err.h
-bn_div.o: ../../include/openssl/lhash.h ../../include/openssl/opensslconf.h
-bn_div.o: ../../include/openssl/opensslv.h ../../include/openssl/ossl_typ.h
-bn_div.o: ../../include/openssl/safestack.h ../../include/openssl/stack.h
-bn_div.o: ../../include/openssl/symhacks.h ../cryptlib.h bn_div.c bn_lcl.h
-bn_err.o: ../../include/openssl/bio.h ../../include/openssl/bn.h
-bn_err.o: ../../include/openssl/crypto.h ../../include/openssl/e_os2.h
-bn_err.o: ../../include/openssl/err.h ../../include/openssl/lhash.h
-bn_err.o: ../../include/openssl/opensslconf.h ../../include/openssl/opensslv.h
-bn_err.o: ../../include/openssl/ossl_typ.h ../../include/openssl/safestack.h
-bn_err.o: ../../include/openssl/stack.h ../../include/openssl/symhacks.h
-bn_err.o: bn_err.c
-bn_exp.o: ../../e_os.h ../../include/openssl/bio.h ../../include/openssl/bn.h
-bn_exp.o: ../../include/openssl/buffer.h ../../include/openssl/crypto.h
-bn_exp.o: ../../include/openssl/e_os2.h ../../include/openssl/err.h
-bn_exp.o: ../../include/openssl/lhash.h ../../include/openssl/opensslconf.h
-bn_exp.o: ../../include/openssl/opensslv.h ../../include/openssl/ossl_typ.h
-bn_exp.o: ../../include/openssl/safestack.h ../../include/openssl/stack.h
-bn_exp.o: ../../include/openssl/symhacks.h ../cryptlib.h bn_exp.c bn_lcl.h
-bn_exp2.o: ../../e_os.h ../../include/openssl/bio.h ../../include/openssl/bn.h
-bn_exp2.o: ../../include/openssl/buffer.h ../../include/openssl/crypto.h
-bn_exp2.o: ../../include/openssl/e_os2.h ../../include/openssl/err.h
-bn_exp2.o: ../../include/openssl/lhash.h ../../include/openssl/opensslconf.h
-bn_exp2.o: ../../include/openssl/opensslv.h ../../include/openssl/ossl_typ.h
-bn_exp2.o: ../../include/openssl/safestack.h ../../include/openssl/stack.h
-bn_exp2.o: ../../include/openssl/symhacks.h ../cryptlib.h bn_exp2.c bn_lcl.h
-bn_gcd.o: ../../e_os.h ../../include/openssl/bio.h ../../include/openssl/bn.h
-bn_gcd.o: ../../include/openssl/buffer.h ../../include/openssl/crypto.h
-bn_gcd.o: ../../include/openssl/e_os2.h ../../include/openssl/err.h
-bn_gcd.o: ../../include/openssl/lhash.h ../../include/openssl/opensslconf.h
-bn_gcd.o: ../../include/openssl/opensslv.h ../../include/openssl/ossl_typ.h
-bn_gcd.o: ../../include/openssl/safestack.h ../../include/openssl/stack.h
-bn_gcd.o: ../../include/openssl/symhacks.h ../cryptlib.h bn_gcd.c bn_lcl.h
-bn_gf2m.o: ../../e_os.h ../../include/openssl/bio.h ../../include/openssl/bn.h
-bn_gf2m.o: ../../include/openssl/buffer.h ../../include/openssl/crypto.h
-bn_gf2m.o: ../../include/openssl/e_os2.h ../../include/openssl/err.h
-bn_gf2m.o: ../../include/openssl/lhash.h ../../include/openssl/opensslconf.h
-bn_gf2m.o: ../../include/openssl/opensslv.h ../../include/openssl/ossl_typ.h
-bn_gf2m.o: ../../include/openssl/safestack.h ../../include/openssl/stack.h
-bn_gf2m.o: ../../include/openssl/symhacks.h ../cryptlib.h bn_gf2m.c bn_lcl.h
-bn_kron.o: ../../e_os.h ../../include/openssl/bio.h ../../include/openssl/bn.h
-bn_kron.o: ../../include/openssl/buffer.h ../../include/openssl/crypto.h
-bn_kron.o: ../../include/openssl/e_os2.h ../../include/openssl/err.h
-bn_kron.o: ../../include/openssl/lhash.h ../../include/openssl/opensslconf.h
-bn_kron.o: ../../include/openssl/opensslv.h ../../include/openssl/ossl_typ.h
-bn_kron.o: ../../include/openssl/safestack.h ../../include/openssl/stack.h
-bn_kron.o: ../../include/openssl/symhacks.h ../cryptlib.h bn_kron.c bn_lcl.h
-bn_lib.o: ../../e_os.h ../../include/openssl/bio.h ../../include/openssl/bn.h
-bn_lib.o: ../../include/openssl/buffer.h ../../include/openssl/crypto.h
-bn_lib.o: ../../include/openssl/e_os2.h ../../include/openssl/err.h
-bn_lib.o: ../../include/openssl/lhash.h ../../include/openssl/opensslconf.h
-bn_lib.o: ../../include/openssl/opensslv.h ../../include/openssl/ossl_typ.h
-bn_lib.o: ../../include/openssl/safestack.h ../../include/openssl/stack.h
-bn_lib.o: ../../include/openssl/symhacks.h ../cryptlib.h bn_lcl.h bn_lib.c
-bn_mod.o: ../../e_os.h ../../include/openssl/bio.h ../../include/openssl/bn.h
-bn_mod.o: ../../include/openssl/buffer.h ../../include/openssl/crypto.h
-bn_mod.o: ../../include/openssl/e_os2.h ../../include/openssl/err.h
-bn_mod.o: ../../include/openssl/lhash.h ../../include/openssl/opensslconf.h
-bn_mod.o: ../../include/openssl/opensslv.h ../../include/openssl/ossl_typ.h
-bn_mod.o: ../../include/openssl/safestack.h ../../include/openssl/stack.h
-bn_mod.o: ../../include/openssl/symhacks.h ../cryptlib.h bn_lcl.h bn_mod.c
-bn_mont.o: ../../e_os.h ../../include/openssl/bio.h ../../include/openssl/bn.h
-bn_mont.o: ../../include/openssl/buffer.h ../../include/openssl/crypto.h
-bn_mont.o: ../../include/openssl/e_os2.h ../../include/openssl/err.h
-bn_mont.o: ../../include/openssl/lhash.h ../../include/openssl/opensslconf.h
-bn_mont.o: ../../include/openssl/opensslv.h ../../include/openssl/ossl_typ.h
-bn_mont.o: ../../include/openssl/safestack.h ../../include/openssl/stack.h
-bn_mont.o: ../../include/openssl/symhacks.h ../cryptlib.h bn_lcl.h bn_mont.c
-bn_mpi.o: ../../e_os.h ../../include/openssl/bio.h ../../include/openssl/bn.h
-bn_mpi.o: ../../include/openssl/buffer.h ../../include/openssl/crypto.h
-bn_mpi.o: ../../include/openssl/e_os2.h ../../include/openssl/err.h
-bn_mpi.o: ../../include/openssl/lhash.h ../../include/openssl/opensslconf.h
-bn_mpi.o: ../../include/openssl/opensslv.h ../../include/openssl/ossl_typ.h
-bn_mpi.o: ../../include/openssl/safestack.h ../../include/openssl/stack.h
-bn_mpi.o: ../../include/openssl/symhacks.h ../cryptlib.h bn_lcl.h bn_mpi.c
-bn_mul.o: ../../e_os.h ../../include/openssl/bio.h ../../include/openssl/bn.h
-bn_mul.o: ../../include/openssl/buffer.h ../../include/openssl/crypto.h
-bn_mul.o: ../../include/openssl/e_os2.h ../../include/openssl/err.h
-bn_mul.o: ../../include/openssl/lhash.h ../../include/openssl/opensslconf.h
-bn_mul.o: ../../include/openssl/opensslv.h ../../include/openssl/ossl_typ.h
-bn_mul.o: ../../include/openssl/safestack.h ../../include/openssl/stack.h
-bn_mul.o: ../../include/openssl/symhacks.h ../cryptlib.h bn_lcl.h bn_mul.c
-bn_nist.o: ../../e_os.h ../../include/openssl/bio.h ../../include/openssl/bn.h
-bn_nist.o: ../../include/openssl/buffer.h ../../include/openssl/crypto.h
-bn_nist.o: ../../include/openssl/e_os2.h ../../include/openssl/err.h
-bn_nist.o: ../../include/openssl/lhash.h ../../include/openssl/opensslconf.h
-bn_nist.o: ../../include/openssl/opensslv.h ../../include/openssl/ossl_typ.h
-bn_nist.o: ../../include/openssl/safestack.h ../../include/openssl/stack.h
-bn_nist.o: ../../include/openssl/symhacks.h ../cryptlib.h bn_lcl.h bn_nist.c
-bn_prime.o: ../../e_os.h ../../include/openssl/bio.h ../../include/openssl/bn.h
-bn_prime.o: ../../include/openssl/buffer.h ../../include/openssl/crypto.h
-bn_prime.o: ../../include/openssl/e_os2.h ../../include/openssl/err.h
-bn_prime.o: ../../include/openssl/lhash.h ../../include/openssl/opensslconf.h
-bn_prime.o: ../../include/openssl/opensslv.h ../../include/openssl/ossl_typ.h
-bn_prime.o: ../../include/openssl/rand.h ../../include/openssl/safestack.h
-bn_prime.o: ../../include/openssl/stack.h ../../include/openssl/symhacks.h
-bn_prime.o: ../cryptlib.h bn_lcl.h bn_prime.c bn_prime.h
-bn_print.o: ../../e_os.h ../../include/openssl/bio.h ../../include/openssl/bn.h
-bn_print.o: ../../include/openssl/buffer.h ../../include/openssl/crypto.h
-bn_print.o: ../../include/openssl/e_os2.h ../../include/openssl/err.h
-bn_print.o: ../../include/openssl/lhash.h ../../include/openssl/opensslconf.h
-bn_print.o: ../../include/openssl/opensslv.h ../../include/openssl/ossl_typ.h
-bn_print.o: ../../include/openssl/safestack.h ../../include/openssl/stack.h
-bn_print.o: ../../include/openssl/symhacks.h ../cryptlib.h bn_lcl.h bn_print.c
-bn_rand.o: ../../e_os.h ../../include/openssl/bio.h ../../include/openssl/bn.h
-bn_rand.o: ../../include/openssl/buffer.h ../../include/openssl/crypto.h
-bn_rand.o: ../../include/openssl/e_os2.h ../../include/openssl/err.h
-bn_rand.o: ../../include/openssl/lhash.h ../../include/openssl/opensslconf.h
-bn_rand.o: ../../include/openssl/opensslv.h ../../include/openssl/ossl_typ.h
-bn_rand.o: ../../include/openssl/rand.h ../../include/openssl/safestack.h
-bn_rand.o: ../../include/openssl/stack.h ../../include/openssl/symhacks.h
-bn_rand.o: ../cryptlib.h bn_lcl.h bn_rand.c
-bn_recp.o: ../../e_os.h ../../include/openssl/bio.h ../../include/openssl/bn.h
-bn_recp.o: ../../include/openssl/buffer.h ../../include/openssl/crypto.h
-bn_recp.o: ../../include/openssl/e_os2.h ../../include/openssl/err.h
-bn_recp.o: ../../include/openssl/lhash.h ../../include/openssl/opensslconf.h
-bn_recp.o: ../../include/openssl/opensslv.h ../../include/openssl/ossl_typ.h
-bn_recp.o: ../../include/openssl/safestack.h ../../include/openssl/stack.h
-bn_recp.o: ../../include/openssl/symhacks.h ../cryptlib.h bn_lcl.h bn_recp.c
-bn_shift.o: ../../e_os.h ../../include/openssl/bio.h ../../include/openssl/bn.h
-bn_shift.o: ../../include/openssl/buffer.h ../../include/openssl/crypto.h
-bn_shift.o: ../../include/openssl/e_os2.h ../../include/openssl/err.h
-bn_shift.o: ../../include/openssl/lhash.h ../../include/openssl/opensslconf.h
-bn_shift.o: ../../include/openssl/opensslv.h ../../include/openssl/ossl_typ.h
-bn_shift.o: ../../include/openssl/safestack.h ../../include/openssl/stack.h
-bn_shift.o: ../../include/openssl/symhacks.h ../cryptlib.h bn_lcl.h bn_shift.c
-bn_sqr.o: ../../e_os.h ../../include/openssl/bio.h ../../include/openssl/bn.h
-bn_sqr.o: ../../include/openssl/buffer.h ../../include/openssl/crypto.h
-bn_sqr.o: ../../include/openssl/e_os2.h ../../include/openssl/err.h
-bn_sqr.o: ../../include/openssl/lhash.h ../../include/openssl/opensslconf.h
-bn_sqr.o: ../../include/openssl/opensslv.h ../../include/openssl/ossl_typ.h
-bn_sqr.o: ../../include/openssl/safestack.h ../../include/openssl/stack.h
-bn_sqr.o: ../../include/openssl/symhacks.h ../cryptlib.h bn_lcl.h bn_sqr.c
-bn_sqrt.o: ../../e_os.h ../../include/openssl/bio.h ../../include/openssl/bn.h
-bn_sqrt.o: ../../include/openssl/buffer.h ../../include/openssl/crypto.h
-bn_sqrt.o: ../../include/openssl/e_os2.h ../../include/openssl/err.h
-bn_sqrt.o: ../../include/openssl/lhash.h ../../include/openssl/opensslconf.h
-bn_sqrt.o: ../../include/openssl/opensslv.h ../../include/openssl/ossl_typ.h
-bn_sqrt.o: ../../include/openssl/safestack.h ../../include/openssl/stack.h
-bn_sqrt.o: ../../include/openssl/symhacks.h ../cryptlib.h bn_lcl.h bn_sqrt.c
-bn_word.o: ../../e_os.h ../../include/openssl/bio.h ../../include/openssl/bn.h
-bn_word.o: ../../include/openssl/buffer.h ../../include/openssl/crypto.h
-bn_word.o: ../../include/openssl/e_os2.h ../../include/openssl/err.h
-bn_word.o: ../../include/openssl/lhash.h ../../include/openssl/opensslconf.h
-bn_word.o: ../../include/openssl/opensslv.h ../../include/openssl/ossl_typ.h
-bn_word.o: ../../include/openssl/safestack.h ../../include/openssl/stack.h
-bn_word.o: ../../include/openssl/symhacks.h ../cryptlib.h bn_lcl.h bn_word.c
diff --git a/crypto/openssl/crypto/bn/asm/README b/crypto/openssl/crypto/bn/asm/README
deleted file mode 100644
index b0f3a68a06ab..000000000000
--- a/crypto/openssl/crypto/bn/asm/README
+++ /dev/null
@@ -1,27 +0,0 @@
-<OBSOLETE>
-
-All assember in this directory are just version of the file
-crypto/bn/bn_asm.c.
-
-Quite a few of these files are just the assember output from gcc since on 
-quite a few machines they are 2 times faster than the system compiler.
-
-For the x86, I have hand written assember because of the bad job all
-compilers seem to do on it.  This normally gives a 2 time speed up in the RSA
-routines.
-
-For the DEC alpha, I also hand wrote the assember (except the division which
-is just the output from the C compiler pasted on the end of the file).
-On the 2 alpha C compilers I had access to, it was not possible to do
-64b x 64b -> 128b calculations (both long and the long long data types
-were 64 bits).  So the hand assember gives access to the 128 bit result and
-a 2 times speedup :-).
-
-There are 3 versions of assember for the HP PA-RISC.
-
-pa-risc.s is the origional one which works fine and generated using gcc :-)
-
-pa-risc2W.s and pa-risc2.s are 64 and 32-bit PA-RISC 2.0 implementations
-by Chris Ruemmler from HP (with some help from the HP C compiler).
-
-</OBSOLETE>
diff --git a/crypto/openssl/crypto/bn/asm/alpha.s b/crypto/openssl/crypto/bn/asm/alpha.s
deleted file mode 100644
index 555ff0b92d1c..000000000000
--- a/crypto/openssl/crypto/bn/asm/alpha.s
+++ /dev/null
@@ -1,3199 +0,0 @@
- # DEC Alpha assember
- # The bn_div_words is actually gcc output but the other parts are hand done.
- # Thanks to tzeruch@ceddec.com for sending me the gcc output for
- # bn_div_words.
- # I've gone back and re-done most of routines.
- # The key thing to remeber for the 164 CPU is that while a
- # multiply operation takes 8 cycles, another one can only be issued
- # after 4 cycles have elapsed.  I've done modification to help
- # improve this.  Also, normally, a ld instruction will not be available
- # for about 3 cycles.
-	.file	1 "bn_asm.c"
-	.set noat
-gcc2_compiled.:
-__gnu_compiled_c:
-	.text
-	.align 3
-	.globl bn_mul_add_words
-	.ent bn_mul_add_words
-bn_mul_add_words:
-bn_mul_add_words..ng:
-	.frame $30,0,$26,0
-	.prologue 0
-	.align 5
-	subq	$18,4,$18
-	bis	$31,$31,$0
-	blt	$18,$43		# if we are -1, -2, -3 or -4 goto tail code
-	ldq	$20,0($17)	# 1 1
-	ldq	$1,0($16)	# 1 1
-	.align 3
-$42:
-	mulq	$20,$19,$5	# 1 2 1	######
-	ldq	$21,8($17)	# 2 1
-	ldq	$2,8($16)	# 2 1
-	umulh	$20,$19,$20	# 1 2	######
-	ldq	$27,16($17)	# 3 1
-	ldq	$3,16($16)	# 3 1
-	mulq	$21,$19,$6	# 2 2 1	######
-	 ldq	$28,24($17)	# 4 1
-	addq	$1,$5,$1	# 1 2 2
-	 ldq	$4,24($16)	# 4 1
-	umulh	$21,$19,$21	# 2 2	######
-	 cmpult	$1,$5,$22	# 1 2 3 1
-	addq	$20,$22,$20	# 1 3 1
-	 addq	$1,$0,$1	# 1 2 3 1
-	mulq	$27,$19,$7	# 3 2 1	######
-	 cmpult	$1,$0,$0	# 1 2 3 2
-	addq	$2,$6,$2	# 2 2 2
-	 addq	$20,$0,$0	# 1 3 2 
-	cmpult	$2,$6,$23	# 2 2 3 1
-	 addq	$21,$23,$21	# 2 3 1
-	umulh	$27,$19,$27	# 3 2	######
-	 addq	$2,$0,$2	# 2 2 3 1
-	cmpult	$2,$0,$0	# 2 2 3 2
-	 subq	$18,4,$18
-	mulq	$28,$19,$8	# 4 2 1	######
-	 addq	$21,$0,$0	# 2 3 2 
-	addq	$3,$7,$3	# 3 2 2
-	 addq	$16,32,$16
-	cmpult	$3,$7,$24	# 3 2 3 1
-	 stq	$1,-32($16)	# 1 2 4
-	umulh	$28,$19,$28	# 4 2	######
-	 addq	$27,$24,$27	# 3 3 1
-	addq	$3,$0,$3	# 3 2 3 1
-	 stq	$2,-24($16)	# 2 2 4
-	cmpult	$3,$0,$0	# 3 2 3 2
-	 stq	$3,-16($16)	# 3 2 4
-	addq	$4,$8,$4	# 4 2 2
-	 addq	$27,$0,$0	# 3 3 2 
-	cmpult	$4,$8,$25	# 4 2 3 1
-	 addq	$17,32,$17
-	addq	$28,$25,$28	# 4 3 1
-	 addq	$4,$0,$4	# 4 2 3 1
-	cmpult	$4,$0,$0	# 4 2 3 2
-	 stq	$4,-8($16)	# 4 2 4
-	addq	$28,$0,$0	# 4 3 2 
-	 blt	$18,$43
-
-	ldq	$20,0($17)	# 1 1
-	ldq	$1,0($16)	# 1 1
-
-	br	$42
-
-	.align 4
-$45:
-	ldq	$20,0($17)	# 4 1
-	ldq	$1,0($16)	# 4 1
-	mulq	$20,$19,$5	# 4 2 1
-	subq	$18,1,$18
-	addq	$16,8,$16
-	addq	$17,8,$17
-	umulh	$20,$19,$20	# 4 2
-	addq	$1,$5,$1	# 4 2 2
-	cmpult	$1,$5,$22	# 4 2 3 1
-	addq	$20,$22,$20	# 4 3 1
-	addq	$1,$0,$1	# 4 2 3 1
-	cmpult	$1,$0,$0	# 4 2 3 2
-	addq	$20,$0,$0	# 4 3 2 
-	stq	$1,-8($16)	# 4 2 4
-	bgt	$18,$45
-	ret	$31,($26),1	# else exit
-
-	.align 4
-$43:
-	addq	$18,4,$18
-	bgt	$18,$45		# goto tail code
-	ret	$31,($26),1	# else exit
-
-	.end bn_mul_add_words
-	.align 3
-	.globl bn_mul_words
-	.ent bn_mul_words
-bn_mul_words:
-bn_mul_words..ng:
-	.frame $30,0,$26,0
-	.prologue 0
-	.align 5
-	subq	$18,4,$18
-	bis	$31,$31,$0
-	blt	$18,$143	# if we are -1, -2, -3 or -4 goto tail code
-	ldq	$20,0($17)	# 1 1
-	.align 3
-$142:
-
-	mulq	$20,$19,$5	# 1 2 1	#####
-	 ldq	$21,8($17)	# 2 1
-	 ldq	$27,16($17)	# 3 1
-	umulh	$20,$19,$20	# 1 2	#####
-	 ldq	$28,24($17)	# 4 1
-	mulq	$21,$19,$6	# 2 2 1	#####
-	 addq	$5,$0,$5	# 1 2 3 1
-	subq	$18,4,$18
-	 cmpult	$5,$0,$0	# 1 2 3 2
-	umulh	$21,$19,$21	# 2 2	#####
-	 addq	$20,$0,$0	# 1 3 2 
-	addq	$17,32,$17
-	 addq	$6,$0,$6	# 2 2 3 1
-	mulq	$27,$19,$7	# 3 2 1	#####
-	 cmpult	$6,$0,$0	# 2 2 3 2
-	addq	$21,$0,$0	# 2 3 2 
-	 addq	$16,32,$16
-	umulh	$27,$19,$27	# 3 2	#####
-	 stq	$5,-32($16)	# 1 2 4
-	mulq	$28,$19,$8	# 4 2 1	#####
-	 addq	$7,$0,$7	# 3 2 3 1
-	stq	$6,-24($16)	# 2 2 4
-	 cmpult	$7,$0,$0	# 3 2 3 2
-	umulh	$28,$19,$28	# 4 2	#####
-	 addq	$27,$0,$0	# 3 3 2 
-	stq	$7,-16($16)	# 3 2 4
-	 addq	$8,$0,$8	# 4 2 3 1
-	cmpult	$8,$0,$0	# 4 2 3 2
-
-	addq	$28,$0,$0	# 4 3 2 
-
-	stq	$8,-8($16)	# 4 2 4
-
-	blt	$18,$143
-
-	ldq	$20,0($17)	# 1 1
-
-	br	$142
-
-	.align 4
-$145:
-	ldq	$20,0($17)	# 4 1
-	mulq	$20,$19,$5	# 4 2 1
-	subq	$18,1,$18
-	umulh	$20,$19,$20	# 4 2
-	addq	$5,$0,$5	# 4 2 3 1
-	 addq	$16,8,$16
-	cmpult	$5,$0,$0	# 4 2 3 2
-	 addq	$17,8,$17
-	addq	$20,$0,$0	# 4 3 2 
-	stq	$5,-8($16)	# 4 2 4
-
-	bgt	$18,$145
-	ret	$31,($26),1	# else exit
-
-	.align 4
-$143:
-	addq	$18,4,$18
-	bgt	$18,$145	# goto tail code
-	ret	$31,($26),1	# else exit
-
-	.end bn_mul_words
-	.align 3
-	.globl bn_sqr_words
-	.ent bn_sqr_words
-bn_sqr_words:
-bn_sqr_words..ng:
-	.frame $30,0,$26,0
-	.prologue 0
-
-	subq	$18,4,$18
-	blt	$18,$543	# if we are -1, -2, -3 or -4 goto tail code
-	ldq	$20,0($17)	# 1 1
-	.align 3
-$542:
-	mulq	$20,$20,$5		######
-	 ldq	$21,8($17)	# 1 1
-	subq	$18,4
- 	umulh	$20,$20,$1		######
-	ldq	$27,16($17)	# 1 1
-	mulq	$21,$21,$6		######
-	ldq	$28,24($17)	# 1 1
-	stq	$5,0($16)	# r[0]
- 	umulh	$21,$21,$2		######
-	stq	$1,8($16)	# r[1]
-	mulq	$27,$27,$7		######
-	stq	$6,16($16)	# r[0]
- 	umulh	$27,$27,$3		######
-	stq	$2,24($16)	# r[1]
-	mulq	$28,$28,$8		######
-	stq	$7,32($16)	# r[0]
- 	umulh	$28,$28,$4		######
-	stq	$3,40($16)	# r[1]
-
- 	addq	$16,64,$16
- 	addq	$17,32,$17
-	stq	$8,-16($16)	# r[0]
-	stq	$4,-8($16)	# r[1]
-
-	blt	$18,$543
-	ldq	$20,0($17)	# 1 1
- 	br 	$542
-
-$442:
-	ldq	$20,0($17)   # a[0]
-	mulq	$20,$20,$5  # a[0]*w low part       r2
-	addq	$16,16,$16
-	addq	$17,8,$17
-	subq	$18,1,$18
-        umulh	$20,$20,$1  # a[0]*w high part       r3
-	stq	$5,-16($16)   # r[0]
-        stq	$1,-8($16)   # r[1]
-
-	bgt	$18,$442
-	ret	$31,($26),1	# else exit
-
-	.align 4
-$543:
-	addq	$18,4,$18
-	bgt	$18,$442	# goto tail code
-	ret	$31,($26),1	# else exit
-	.end bn_sqr_words
-
-	.align 3
-	.globl bn_add_words
-	.ent bn_add_words
-bn_add_words:
-bn_add_words..ng:
-	.frame $30,0,$26,0
-	.prologue 0
-
-	subq	$19,4,$19
-	bis	$31,$31,$0	# carry = 0
-	blt	$19,$900
-	ldq	$5,0($17)	# a[0]
-	ldq	$1,0($18)	# b[1]
-	.align 3
-$901:
-	addq	$1,$5,$1	# r=a+b;
-	 ldq	$6,8($17)	# a[1]
-	cmpult	$1,$5,$22	# did we overflow?
-	 ldq	$2,8($18)	# b[1]
-	addq	$1,$0,$1	# c+= overflow
-	 ldq	$7,16($17)	# a[2]
-	cmpult	$1,$0,$0	# overflow?
-	 ldq	$3,16($18)	# b[2]
-	addq	$0,$22,$0
-	 ldq	$8,24($17)	# a[3]
-	addq	$2,$6,$2	# r=a+b;
-	 ldq	$4,24($18)	# b[3]
-	cmpult	$2,$6,$23	# did we overflow?
-	 addq	$3,$7,$3	# r=a+b;
-	addq	$2,$0,$2	# c+= overflow
-	 cmpult	$3,$7,$24	# did we overflow?
-	cmpult	$2,$0,$0	# overflow?
-	 addq	$4,$8,$4	# r=a+b;
-	addq	$0,$23,$0
-	 cmpult	$4,$8,$25	# did we overflow?
-	addq	$3,$0,$3	# c+= overflow
-	 stq	$1,0($16)	# r[0]=c
-	cmpult	$3,$0,$0	# overflow?
-	 stq	$2,8($16)	# r[1]=c
-	addq	$0,$24,$0
-	 stq	$3,16($16)	# r[2]=c
-	addq	$4,$0,$4	# c+= overflow
-	 subq	$19,4,$19	# loop--
-	cmpult	$4,$0,$0	# overflow?
-	 addq	$17,32,$17	# a++
-	addq	$0,$25,$0
-	 stq	$4,24($16)	# r[3]=c
-	addq	$18,32,$18	# b++
-	 addq	$16,32,$16	# r++
-
-	blt	$19,$900
-	 ldq	$5,0($17)	# a[0]
-	ldq	$1,0($18)	# b[1]
-	 br	$901
-	.align 4
-$945:
-	ldq	$5,0($17)	# a[0]
-	 ldq	$1,0($18)	# b[1]
-	addq	$1,$5,$1	# r=a+b;
-	 subq	$19,1,$19	# loop--
-	addq	$1,$0,$1	# c+= overflow
-	 addq	$17,8,$17	# a++
-	cmpult	$1,$5,$22	# did we overflow?
-	 cmpult	$1,$0,$0	# overflow?
-	addq	$18,8,$18	# b++
-	 stq	$1,0($16)	# r[0]=c
-	addq	$0,$22,$0
-	 addq	$16,8,$16	# r++
-
-	bgt	$19,$945
-	ret	$31,($26),1	# else exit
-
-$900:
-	addq	$19,4,$19
-	bgt	$19,$945	# goto tail code
-	ret	$31,($26),1	# else exit
-	.end bn_add_words
-
- #
- # What follows was taken directly from the C compiler with a few
- # hacks to redo the lables.
- #
-.text
-	.align 3
-	.globl bn_div_words
-	.ent bn_div_words
-bn_div_words:
-	ldgp $29,0($27)
-bn_div_words..ng:
-	lda $30,-48($30)
-	.frame $30,48,$26,0
-	stq $26,0($30)
-	stq $9,8($30)
-	stq $10,16($30)
-	stq $11,24($30)
-	stq $12,32($30)
-	stq $13,40($30)
-	.mask 0x4003e00,-48
-	.prologue 1
-	bis $16,$16,$9
-	bis $17,$17,$10
-	bis $18,$18,$11
-	bis $31,$31,$13
-	bis $31,2,$12
-	bne $11,$119
-	lda $0,-1
-	br $31,$136
-	.align 4
-$119:
-	bis $11,$11,$16
-	jsr $26,BN_num_bits_word
-	ldgp $29,0($26)
-	subq $0,64,$1
-	beq $1,$120
-	bis $31,1,$1
-	sll $1,$0,$1
-	cmpule $9,$1,$1
-	bne $1,$120
- #	lda $16,_IO_stderr_
- #	lda $17,$C32
- #	bis $0,$0,$18
- #	jsr $26,fprintf
- #	ldgp $29,0($26)
-	jsr $26,abort
-	ldgp $29,0($26)
-	.align 4
-$120:
-	bis $31,64,$3
-	cmpult $9,$11,$2
-	subq $3,$0,$1
-	addl $1,$31,$0
-	subq $9,$11,$1
-	cmoveq $2,$1,$9
-	beq $0,$122
-	zapnot $0,15,$2
-	subq $3,$0,$1
-	sll $11,$2,$11
-	sll $9,$2,$3
-	srl $10,$1,$1
-	sll $10,$2,$10
-	bis $3,$1,$9
-$122:
-	srl $11,32,$5
-	zapnot $11,15,$6
-	lda $7,-1
-	.align 5
-$123:
-	srl $9,32,$1
-	subq $1,$5,$1
-	bne $1,$126
-	zapnot $7,15,$27
-	br $31,$127
-	.align 4
-$126:
-	bis $9,$9,$24
-	bis $5,$5,$25
-	divqu $24,$25,$27
-$127:
-	srl $10,32,$4
-	.align 5
-$128:
-	mulq $27,$5,$1
-	subq $9,$1,$3
-	zapnot $3,240,$1
-	bne $1,$129
-	mulq $6,$27,$2
-	sll $3,32,$1
-	addq $1,$4,$1
-	cmpule $2,$1,$2
-	bne $2,$129
-	subq $27,1,$27
-	br $31,$128
-	.align 4
-$129:
-	mulq $27,$6,$1
-	mulq $27,$5,$4
-	srl $1,32,$3
-	sll $1,32,$1
-	addq $4,$3,$4
-	cmpult $10,$1,$2
-	subq $10,$1,$10
-	addq $2,$4,$2
-	cmpult $9,$2,$1
-	bis $2,$2,$4
-	beq $1,$134
-	addq $9,$11,$9
-	subq $27,1,$27
-$134:
-	subl $12,1,$12
-	subq $9,$4,$9
-	beq $12,$124
-	sll $27,32,$13
-	sll $9,32,$2
-	srl $10,32,$1
-	sll $10,32,$10
-	bis $2,$1,$9
-	br $31,$123
-	.align 4
-$124:
-	bis $13,$27,$0
-$136:
-	ldq $26,0($30)
-	ldq $9,8($30)
-	ldq $10,16($30)
-	ldq $11,24($30)
-	ldq $12,32($30)
-	ldq $13,40($30)
-	addq $30,48,$30
-	ret $31,($26),1
-	.end bn_div_words
-
-	.set noat
-	.text
-	.align 3
-	.globl bn_sub_words
-	.ent bn_sub_words
-bn_sub_words:
-bn_sub_words..ng:
-	.frame $30,0,$26,0
-	.prologue 0
-
-	subq	$19,	4,	$19
-	bis	$31,	$31,	$0
-	blt	$19,	$100
-	ldq	$1,	0($17)
-	ldq	$2,	0($18)
-$101:
-	ldq	$3,	8($17)
-	cmpult	$1,	$2,	$4
-	ldq	$5,	8($18)
-	subq	$1,	$2,	$1
-	ldq	$6,	16($17)
-	cmpult	$1,	$0,	$2
-	ldq	$7,	16($18)
-	subq	$1,	$0,	$23
-	ldq	$8,	24($17)
-	addq	$2,	$4,	$0
-	cmpult	$3,	$5,	$24
-	subq	$3,	$5,	$3
-	ldq	$22,	24($18)
-	cmpult	$3,	$0,	$5
-	subq	$3,	$0,	$25
-	addq	$5,	$24,	$0
-	cmpult	$6,	$7,	$27
-	subq	$6,	$7,	$6
-	stq	$23,	0($16)
-	cmpult	$6,	$0,	$7
-	subq	$6,	$0,	$28
-	addq	$7,	$27,	$0
-	cmpult	$8,	$22,	$21
-	subq	$8,	$22,	$8
-	stq	$25,	8($16)
-	cmpult	$8,	$0,	$22
-	subq	$8,	$0,	$20
-	addq	$22,	$21,	$0
-	stq	$28,	16($16)
-	subq	$19,	4,	$19
-	stq	$20,	24($16)
-	addq	$17,	32,	$17
-	addq	$18,	32,	$18
-	addq	$16,	32,	$16
-	blt	$19,	$100
-	ldq	$1,	0($17)
-	ldq	$2,	0($18)
-	br	$101
-$102:
-	ldq	$1,	0($17)
-	ldq	$2,	0($18)
-	cmpult	$1,	$2,	$27
-	subq	$1,	$2,	$1
-	cmpult	$1,	$0,	$2
-	subq	$1,	$0,	$1
-	stq	$1,	0($16)
-	addq	$2,	$27,	$0
-	addq	$17,	8,	$17
-	addq	$18,	8,	$18
-	addq	$16,	8,	$16
-	subq	$19,	1,	$19
-	bgt	$19,	$102
-	ret	$31,($26),1
-$100:
-	addq	$19,	4,	$19
-	bgt	$19,	$102
-$103:
-	ret	$31,($26),1
-	.end bn_sub_words
-	.text
-	.align 3
-	.globl bn_mul_comba4
-	.ent bn_mul_comba4
-bn_mul_comba4:
-bn_mul_comba4..ng:
-	.frame $30,0,$26,0
-	.prologue 0
-
-	ldq	$0,	0($17)
-	ldq	$1,	0($18)
-	ldq	$2,	8($17)
-	ldq	$3,	8($18)
-	ldq	$4,	16($17)
-	ldq	$5,	16($18)
-	ldq	$6,	24($17)
-	ldq	$7,	24($18)
-	bis	$31,	$31,	$23
-	mulq	$0,	$1,	$8
-	umulh	$0,	$1,	$22
-	stq	$8,	0($16)
-	bis	$31,	$31,	$8
-	mulq	$0,	$3,	$24
-	umulh	$0,	$3,	$25
-	addq	$22,	$24,	$22
-	cmpult	$22,	$24,	$27
-	addq	$27,	$25,	$25
-	addq	$23,	$25,	$23
-	cmpult	$23,	$25,	$28
-	addq	$8,	$28,	$8
-	mulq	$2,	$1,	$21
-	umulh	$2,	$1,	$20
-	addq	$22,	$21,	$22
-	cmpult	$22,	$21,	$19
-	addq	$19,	$20,	$20
-	addq	$23,	$20,	$23
-	cmpult	$23,	$20,	$17
-	addq	$8,	$17,	$8
-	stq	$22,	8($16)
-	bis	$31,	$31,	$22
-	mulq	$2,	$3,	$18
-	umulh	$2,	$3,	$24
-	addq	$23,	$18,	$23
-	cmpult	$23,	$18,	$27
-	addq	$27,	$24,	$24
-	addq	$8,	$24,	$8
-	cmpult	$8,	$24,	$25
-	addq	$22,	$25,	$22
-	mulq	$0,	$5,	$28
-	umulh	$0,	$5,	$21
-	addq	$23,	$28,	$23
-	cmpult	$23,	$28,	$19
-	addq	$19,	$21,	$21
-	addq	$8,	$21,	$8
-	cmpult	$8,	$21,	$20
-	addq	$22,	$20,	$22
-	mulq	$4,	$1,	$17
-	umulh	$4,	$1,	$18
-	addq	$23,	$17,	$23
-	cmpult	$23,	$17,	$27
-	addq	$27,	$18,	$18
-	addq	$8,	$18,	$8
-	cmpult	$8,	$18,	$24
-	addq	$22,	$24,	$22
-	stq	$23,	16($16)
-	bis	$31,	$31,	$23
-	mulq	$0,	$7,	$25
-	umulh	$0,	$7,	$28
-	addq	$8,	$25,	$8
-	cmpult	$8,	$25,	$19
-	addq	$19,	$28,	$28
-	addq	$22,	$28,	$22
-	cmpult	$22,	$28,	$21
-	addq	$23,	$21,	$23
-	mulq	$2,	$5,	$20
-	umulh	$2,	$5,	$17
-	addq	$8,	$20,	$8
-	cmpult	$8,	$20,	$27
-	addq	$27,	$17,	$17
-	addq	$22,	$17,	$22
-	cmpult	$22,	$17,	$18
-	addq	$23,	$18,	$23
-	mulq	$4,	$3,	$24
-	umulh	$4,	$3,	$25
-	addq	$8,	$24,	$8
-	cmpult	$8,	$24,	$19
-	addq	$19,	$25,	$25
-	addq	$22,	$25,	$22
-	cmpult	$22,	$25,	$28
-	addq	$23,	$28,	$23
-	mulq	$6,	$1,	$21
-	umulh	$6,	$1,	$0
-	addq	$8,	$21,	$8
-	cmpult	$8,	$21,	$20
-	addq	$20,	$0,	$0
-	addq	$22,	$0,	$22
-	cmpult	$22,	$0,	$27
-	addq	$23,	$27,	$23
-	stq	$8,	24($16)
-	bis	$31,	$31,	$8
-	mulq	$2,	$7,	$17
-	umulh	$2,	$7,	$18
-	addq	$22,	$17,	$22
-	cmpult	$22,	$17,	$24
-	addq	$24,	$18,	$18
-	addq	$23,	$18,	$23
-	cmpult	$23,	$18,	$19
-	addq	$8,	$19,	$8
-	mulq	$4,	$5,	$25
-	umulh	$4,	$5,	$28
-	addq	$22,	$25,	$22
-	cmpult	$22,	$25,	$21
-	addq	$21,	$28,	$28
-	addq	$23,	$28,	$23
-	cmpult	$23,	$28,	$20
-	addq	$8,	$20,	$8
-	mulq	$6,	$3,	$0
-	umulh	$6,	$3,	$27
-	addq	$22,	$0,	$22
-	cmpult	$22,	$0,	$1
-	addq	$1,	$27,	$27
-	addq	$23,	$27,	$23
-	cmpult	$23,	$27,	$17
-	addq	$8,	$17,	$8
-	stq	$22,	32($16)
-	bis	$31,	$31,	$22
-	mulq	$4,	$7,	$24
-	umulh	$4,	$7,	$18
-	addq	$23,	$24,	$23
-	cmpult	$23,	$24,	$19
-	addq	$19,	$18,	$18
-	addq	$8,	$18,	$8
-	cmpult	$8,	$18,	$2
-	addq	$22,	$2,	$22
-	mulq	$6,	$5,	$25
-	umulh	$6,	$5,	$21
-	addq	$23,	$25,	$23
-	cmpult	$23,	$25,	$28
-	addq	$28,	$21,	$21
-	addq	$8,	$21,	$8
-	cmpult	$8,	$21,	$20
-	addq	$22,	$20,	$22
-	stq	$23,	40($16)
-	bis	$31,	$31,	$23
-	mulq	$6,	$7,	$0
-	umulh	$6,	$7,	$1
-	addq	$8,	$0,	$8
-	cmpult	$8,	$0,	$27
-	addq	$27,	$1,	$1
-	addq	$22,	$1,	$22
-	cmpult	$22,	$1,	$17
-	addq	$23,	$17,	$23
-	stq	$8,	48($16)
-	stq	$22,	56($16)
-	ret	$31,($26),1
-	.end bn_mul_comba4
-	.text
-	.align 3
-	.globl bn_mul_comba8
-	.ent bn_mul_comba8
-bn_mul_comba8:
-bn_mul_comba8..ng:
-	.frame $30,0,$26,0
-	.prologue 0
-	ldq	$1,	0($17)
-	ldq	$2,	0($18)
-	zapnot	$1,	15,	$7
-	srl	$2,	32,	$8
-	mulq	$8,	$7,	$22
-	srl	$1,	32,	$6
-	zapnot	$2,	15,	$5
-	mulq	$5,	$6,	$4
-	mulq	$7,	$5,	$24
-	addq	$22,	$4,	$22
-	cmpult	$22,	$4,	$1
-	mulq	$6,	$8,	$3
-	beq	$1,	$173
-	bis	$31,	1,	$1
-	sll	$1,	32,	$1
-	addq	$3,	$1,	$3
-$173:
-	sll	$22,	32,	$4
-	addq	$24,	$4,	$24
-	stq	$24,	0($16)
-	ldq	$2,	0($17)
-	ldq	$1,	8($18)
-	zapnot	$2,	15,	$7
-	srl	$1,	32,	$8
-	mulq	$8,	$7,	$25
-	zapnot	$1,	15,	$5
-	mulq	$7,	$5,	$0
-	srl	$2,	32,	$6
-	mulq	$5,	$6,	$23
-	mulq	$6,	$8,	$6
-	srl	$22,	32,	$1
-	cmpult	$24,	$4,	$2
-	addq	$3,	$1,	$3
-	addq	$2,	$3,	$22
-	addq	$25,	$23,	$25
-	cmpult	$25,	$23,	$1
-	bis	$31,	1,	$2
-	beq	$1,	$177
-	sll	$2,	32,	$1
-	addq	$6,	$1,	$6
-$177:
-	sll	$25,	32,	$23
-	ldq	$1,	0($18)
-	addq	$0,	$23,	$0
-	bis	$0,	$0,	$7
-	ldq	$3,	8($17)
-	addq	$22,	$7,	$22
-	srl	$1,	32,	$8
-	cmpult	$22,	$7,	$4
-	zapnot	$3,	15,	$7
-	mulq	$8,	$7,	$28
-	zapnot	$1,	15,	$5
-	mulq	$7,	$5,	$21
-	srl	$25,	32,	$1
-	cmpult	$0,	$23,	$2
-	addq	$6,	$1,	$6
-	addq	$2,	$6,	$6
-	addq	$4,	$6,	$24
-	srl	$3,	32,	$6
-	mulq	$5,	$6,	$2
-	mulq	$6,	$8,	$6
-	addq	$28,	$2,	$28
-	cmpult	$28,	$2,	$1
-	bis	$31,	1,	$2
-	beq	$1,	$181
-	sll	$2,	32,	$1
-	addq	$6,	$1,	$6
-$181:
-	sll	$28,	32,	$2
-	addq	$21,	$2,	$21
-	bis	$21,	$21,	$7
-	addq	$22,	$7,	$22
-	stq	$22,	8($16)
-	ldq	$3,	16($17)
-	ldq	$1,	0($18)
-	cmpult	$22,	$7,	$4
-	zapnot	$3,	15,	$7
-	srl	$1,	32,	$8
-	mulq	$8,	$7,	$22
-	zapnot	$1,	15,	$5
-	mulq	$7,	$5,	$20
-	srl	$28,	32,	$1
-	cmpult	$21,	$2,	$2
-	addq	$6,	$1,	$6
-	addq	$2,	$6,	$6
-	addq	$4,	$6,	$6
-	addq	$24,	$6,	$24
-	cmpult	$24,	$6,	$23
-	srl	$3,	32,	$6
-	mulq	$5,	$6,	$2
-	mulq	$6,	$8,	$6
-	addq	$22,	$2,	$22
-	cmpult	$22,	$2,	$1
-	bis	$31,	1,	$2
-	beq	$1,	$185
-	sll	$2,	32,	$1
-	addq	$6,	$1,	$6
-$185:
-	sll	$22,	32,	$2
-	ldq	$1,	8($18)
-	addq	$20,	$2,	$20
-	bis	$20,	$20,	$7
-	ldq	$4,	8($17)
-	addq	$24,	$7,	$24
-	srl	$1,	32,	$8
-	cmpult	$24,	$7,	$3
-	zapnot	$4,	15,	$7
-	mulq	$8,	$7,	$25
-	zapnot	$1,	15,	$5
-	mulq	$7,	$5,	$0
-	srl	$22,	32,	$1
-	cmpult	$20,	$2,	$2
-	addq	$6,	$1,	$6
-	addq	$2,	$6,	$6
-	addq	$3,	$6,	$6
-	addq	$23,	$6,	$23
-	cmpult	$23,	$6,	$22
-	srl	$4,	32,	$6
-	mulq	$5,	$6,	$5
-	bis	$31,	1,	$21
-	addq	$25,	$5,	$25
-	cmpult	$25,	$5,	$1
-	mulq	$6,	$8,	$6
-	beq	$1,	$189
-	sll	$21,	32,	$1
-	addq	$6,	$1,	$6
-$189:
-	sll	$25,	32,	$5
-	ldq	$2,	16($18)
-	addq	$0,	$5,	$0
-	bis	$0,	$0,	$7
-	ldq	$4,	0($17)
-	addq	$24,	$7,	$24
-	srl	$2,	32,	$8
-	cmpult	$24,	$7,	$3
-	zapnot	$4,	15,	$7
-	mulq	$8,	$7,	$28
-	srl	$25,	32,	$1
-	addq	$6,	$1,	$6
-	cmpult	$0,	$5,	$1
-	zapnot	$2,	15,	$5
-	addq	$1,	$6,	$6
-	addq	$3,	$6,	$6
-	addq	$23,	$6,	$23
-	cmpult	$23,	$6,	$1
-	srl	$4,	32,	$6
-	mulq	$5,	$6,	$25
-	mulq	$7,	$5,	$2
-	addq	$1,	$22,	$22
-	addq	$28,	$25,	$28
-	cmpult	$28,	$25,	$1
-	mulq	$6,	$8,	$6
-	beq	$1,	$193
-	sll	$21,	32,	$1
-	addq	$6,	$1,	$6
-$193:
-	sll	$28,	32,	$25
-	addq	$2,	$25,	$2
-	bis	$2,	$2,	$7
-	addq	$24,	$7,	$24
-	stq	$24,	16($16)
-	ldq	$4,	0($17)
-	ldq	$5,	24($18)
-	cmpult	$24,	$7,	$3
-	zapnot	$4,	15,	$7
-	srl	$5,	32,	$8
-	mulq	$8,	$7,	$0
-	srl	$28,	32,	$1
-	cmpult	$2,	$25,	$2
-	addq	$6,	$1,	$6
-	addq	$2,	$6,	$6
-	addq	$3,	$6,	$6
-	addq	$23,	$6,	$23
-	cmpult	$23,	$6,	$1
-	srl	$4,	32,	$6
-	zapnot	$5,	15,	$5
-	mulq	$5,	$6,	$24
-	mulq	$7,	$5,	$2
-	addq	$1,	$22,	$22
-	addq	$0,	$24,	$0
-	cmpult	$0,	$24,	$1
-	mulq	$6,	$8,	$6
-	beq	$1,	$197
-	sll	$21,	32,	$1
-	addq	$6,	$1,	$6
-$197:
-	sll	$0,	32,	$24
-	ldq	$1,	16($18)
-	addq	$2,	$24,	$2
-	bis	$2,	$2,	$7
-	ldq	$4,	8($17)
-	addq	$23,	$7,	$23
-	srl	$1,	32,	$8
-	cmpult	$23,	$7,	$3
-	zapnot	$4,	15,	$7
-	mulq	$8,	$7,	$25
-	zapnot	$1,	15,	$5
-	mulq	$7,	$5,	$21
-	srl	$0,	32,	$1
-	cmpult	$2,	$24,	$2
-	addq	$6,	$1,	$6
-	addq	$2,	$6,	$6
-	addq	$3,	$6,	$6
-	addq	$22,	$6,	$22
-	cmpult	$22,	$6,	$24
-	srl	$4,	32,	$6
-	mulq	$5,	$6,	$5
-	bis	$31,	1,	$20
-	addq	$25,	$5,	$25
-	cmpult	$25,	$5,	$1
-	mulq	$6,	$8,	$6
-	beq	$1,	$201
-	sll	$20,	32,	$1
-	addq	$6,	$1,	$6
-$201:
-	sll	$25,	32,	$5
-	ldq	$2,	8($18)
-	addq	$21,	$5,	$21
-	bis	$21,	$21,	$7
-	ldq	$4,	16($17)
-	addq	$23,	$7,	$23
-	srl	$2,	32,	$8
-	cmpult	$23,	$7,	$3
-	zapnot	$4,	15,	$7
-	mulq	$8,	$7,	$28
-	srl	$25,	32,	$1
-	addq	$6,	$1,	$6
-	cmpult	$21,	$5,	$1
-	zapnot	$2,	15,	$5
-	addq	$1,	$6,	$6
-	addq	$3,	$6,	$6
-	addq	$22,	$6,	$22
-	cmpult	$22,	$6,	$1
-	srl	$4,	32,	$6
-	mulq	$5,	$6,	$25
-	mulq	$7,	$5,	$5
-	addq	$1,	$24,	$24
-	addq	$28,	$25,	$28
-	cmpult	$28,	$25,	$1
-	mulq	$6,	$8,	$6
-	beq	$1,	$205
-	sll	$20,	32,	$1
-	addq	$6,	$1,	$6
-$205:
-	sll	$28,	32,	$25
-	ldq	$2,	0($18)
-	addq	$5,	$25,	$5
-	bis	$5,	$5,	$7
-	ldq	$4,	24($17)
-	addq	$23,	$7,	$23
-	srl	$2,	32,	$8
-	cmpult	$23,	$7,	$3
-	zapnot	$4,	15,	$7
-	mulq	$8,	$7,	$0
-	srl	$28,	32,	$1
-	addq	$6,	$1,	$6
-	cmpult	$5,	$25,	$1
-	zapnot	$2,	15,	$5
-	addq	$1,	$6,	$6
-	addq	$3,	$6,	$6
-	addq	$22,	$6,	$22
-	cmpult	$22,	$6,	$1
-	srl	$4,	32,	$6
-	mulq	$5,	$6,	$25
-	mulq	$7,	$5,	$2
-	addq	$1,	$24,	$24
-	addq	$0,	$25,	$0
-	cmpult	$0,	$25,	$1
-	mulq	$6,	$8,	$6
-	beq	$1,	$209
-	sll	$20,	32,	$1
-	addq	$6,	$1,	$6
-$209:
-	sll	$0,	32,	$25
-	addq	$2,	$25,	$2
-	bis	$2,	$2,	$7
-	addq	$23,	$7,	$23
-	stq	$23,	24($16)
-	ldq	$4,	32($17)
-	ldq	$5,	0($18)
-	cmpult	$23,	$7,	$3
-	zapnot	$4,	15,	$7
-	srl	$5,	32,	$8
-	mulq	$8,	$7,	$28
-	srl	$0,	32,	$1
-	cmpult	$2,	$25,	$2
-	addq	$6,	$1,	$6
-	addq	$2,	$6,	$6
-	addq	$3,	$6,	$6
-	addq	$22,	$6,	$22
-	cmpult	$22,	$6,	$1
-	srl	$4,	32,	$6
-	zapnot	$5,	15,	$5
-	mulq	$5,	$6,	$23
-	mulq	$7,	$5,	$2
-	addq	$1,	$24,	$24
-	addq	$28,	$23,	$28
-	cmpult	$28,	$23,	$1
-	mulq	$6,	$8,	$6
-	beq	$1,	$213
-	sll	$20,	32,	$1
-	addq	$6,	$1,	$6
-$213:
-	sll	$28,	32,	$23
-	ldq	$1,	8($18)
-	addq	$2,	$23,	$2
-	bis	$2,	$2,	$7
-	ldq	$4,	24($17)
-	addq	$22,	$7,	$22
-	srl	$1,	32,	$8
-	cmpult	$22,	$7,	$3
-	zapnot	$4,	15,	$7
-	mulq	$8,	$7,	$25
-	zapnot	$1,	15,	$5
-	mulq	$7,	$5,	$0
-	srl	$28,	32,	$1
-	cmpult	$2,	$23,	$2
-	addq	$6,	$1,	$6
-	addq	$2,	$6,	$6
-	addq	$3,	$6,	$6
-	addq	$24,	$6,	$24
-	cmpult	$24,	$6,	$23
-	srl	$4,	32,	$6
-	mulq	$5,	$6,	$5
-	bis	$31,	1,	$21
-	addq	$25,	$5,	$25
-	cmpult	$25,	$5,	$1
-	mulq	$6,	$8,	$6
-	beq	$1,	$217
-	sll	$21,	32,	$1
-	addq	$6,	$1,	$6
-$217:
-	sll	$25,	32,	$5
-	ldq	$2,	16($18)
-	addq	$0,	$5,	$0
-	bis	$0,	$0,	$7
-	ldq	$4,	16($17)
-	addq	$22,	$7,	$22
-	srl	$2,	32,	$8
-	cmpult	$22,	$7,	$3
-	zapnot	$4,	15,	$7
-	mulq	$8,	$7,	$28
-	srl	$25,	32,	$1
-	addq	$6,	$1,	$6
-	cmpult	$0,	$5,	$1
-	zapnot	$2,	15,	$5
-	addq	$1,	$6,	$6
-	addq	$3,	$6,	$6
-	addq	$24,	$6,	$24
-	cmpult	$24,	$6,	$1
-	srl	$4,	32,	$6
-	mulq	$5,	$6,	$25
-	mulq	$7,	$5,	$5
-	addq	$1,	$23,	$23
-	addq	$28,	$25,	$28
-	cmpult	$28,	$25,	$1
-	mulq	$6,	$8,	$6
-	beq	$1,	$221
-	sll	$21,	32,	$1
-	addq	$6,	$1,	$6
-$221:
-	sll	$28,	32,	$25
-	ldq	$2,	24($18)
-	addq	$5,	$25,	$5
-	bis	$5,	$5,	$7
-	ldq	$4,	8($17)
-	addq	$22,	$7,	$22
-	srl	$2,	32,	$8
-	cmpult	$22,	$7,	$3
-	zapnot	$4,	15,	$7
-	mulq	$8,	$7,	$0
-	srl	$28,	32,	$1
-	addq	$6,	$1,	$6
-	cmpult	$5,	$25,	$1
-	zapnot	$2,	15,	$5
-	addq	$1,	$6,	$6
-	addq	$3,	$6,	$6
-	addq	$24,	$6,	$24
-	cmpult	$24,	$6,	$1
-	srl	$4,	32,	$6
-	mulq	$5,	$6,	$25
-	mulq	$7,	$5,	$5
-	addq	$1,	$23,	$23
-	addq	$0,	$25,	$0
-	cmpult	$0,	$25,	$1
-	mulq	$6,	$8,	$6
-	beq	$1,	$225
-	sll	$21,	32,	$1
-	addq	$6,	$1,	$6
-$225:
-	sll	$0,	32,	$25
-	ldq	$2,	32($18)
-	addq	$5,	$25,	$5
-	bis	$5,	$5,	$7
-	ldq	$4,	0($17)
-	addq	$22,	$7,	$22
-	srl	$2,	32,	$8
-	cmpult	$22,	$7,	$3
-	zapnot	$4,	15,	$7
-	mulq	$8,	$7,	$28
-	srl	$0,	32,	$1
-	addq	$6,	$1,	$6
-	cmpult	$5,	$25,	$1
-	zapnot	$2,	15,	$5
-	addq	$1,	$6,	$6
-	addq	$3,	$6,	$6
-	addq	$24,	$6,	$24
-	cmpult	$24,	$6,	$1
-	srl	$4,	32,	$6
-	mulq	$5,	$6,	$25
-	mulq	$7,	$5,	$2
-	addq	$1,	$23,	$23
-	addq	$28,	$25,	$28
-	cmpult	$28,	$25,	$1
-	mulq	$6,	$8,	$6
-	beq	$1,	$229
-	sll	$21,	32,	$1
-	addq	$6,	$1,	$6
-$229:
-	sll	$28,	32,	$25
-	addq	$2,	$25,	$2
-	bis	$2,	$2,	$7
-	addq	$22,	$7,	$22
-	stq	$22,	32($16)
-	ldq	$4,	0($17)
-	ldq	$5,	40($18)
-	cmpult	$22,	$7,	$3
-	zapnot	$4,	15,	$7
-	srl	$5,	32,	$8
-	mulq	$8,	$7,	$0
-	srl	$28,	32,	$1
-	cmpult	$2,	$25,	$2
-	addq	$6,	$1,	$6
-	addq	$2,	$6,	$6
-	addq	$3,	$6,	$6
-	addq	$24,	$6,	$24
-	cmpult	$24,	$6,	$1
-	srl	$4,	32,	$6
-	zapnot	$5,	15,	$5
-	mulq	$5,	$6,	$22
-	mulq	$7,	$5,	$2
-	addq	$1,	$23,	$23
-	addq	$0,	$22,	$0
-	cmpult	$0,	$22,	$1
-	mulq	$6,	$8,	$6
-	beq	$1,	$233
-	sll	$21,	32,	$1
-	addq	$6,	$1,	$6
-$233:
-	sll	$0,	32,	$22
-	ldq	$1,	32($18)
-	addq	$2,	$22,	$2
-	bis	$2,	$2,	$7
-	ldq	$4,	8($17)
-	addq	$24,	$7,	$24
-	srl	$1,	32,	$8
-	cmpult	$24,	$7,	$3
-	zapnot	$4,	15,	$7
-	mulq	$8,	$7,	$25
-	zapnot	$1,	15,	$5
-	mulq	$7,	$5,	$21
-	srl	$0,	32,	$1
-	cmpult	$2,	$22,	$2
-	addq	$6,	$1,	$6
-	addq	$2,	$6,	$6
-	addq	$3,	$6,	$6
-	addq	$23,	$6,	$23
-	cmpult	$23,	$6,	$22
-	srl	$4,	32,	$6
-	mulq	$5,	$6,	$5
-	bis	$31,	1,	$20
-	addq	$25,	$5,	$25
-	cmpult	$25,	$5,	$1
-	mulq	$6,	$8,	$6
-	beq	$1,	$237
-	sll	$20,	32,	$1
-	addq	$6,	$1,	$6
-$237:
-	sll	$25,	32,	$5
-	ldq	$2,	24($18)
-	addq	$21,	$5,	$21
-	bis	$21,	$21,	$7
-	ldq	$4,	16($17)
-	addq	$24,	$7,	$24
-	srl	$2,	32,	$8
-	cmpult	$24,	$7,	$3
-	zapnot	$4,	15,	$7
-	mulq	$8,	$7,	$28
-	srl	$25,	32,	$1
-	addq	$6,	$1,	$6
-	cmpult	$21,	$5,	$1
-	zapnot	$2,	15,	$5
-	addq	$1,	$6,	$6
-	addq	$3,	$6,	$6
-	addq	$23,	$6,	$23
-	cmpult	$23,	$6,	$1
-	srl	$4,	32,	$6
-	mulq	$5,	$6,	$25
-	mulq	$7,	$5,	$5
-	addq	$1,	$22,	$22
-	addq	$28,	$25,	$28
-	cmpult	$28,	$25,	$1
-	mulq	$6,	$8,	$6
-	beq	$1,	$241
-	sll	$20,	32,	$1
-	addq	$6,	$1,	$6
-$241:
-	sll	$28,	32,	$25
-	ldq	$2,	16($18)
-	addq	$5,	$25,	$5
-	bis	$5,	$5,	$7
-	ldq	$4,	24($17)
-	addq	$24,	$7,	$24
-	srl	$2,	32,	$8
-	cmpult	$24,	$7,	$3
-	zapnot	$4,	15,	$7
-	mulq	$8,	$7,	$0
-	srl	$28,	32,	$1
-	addq	$6,	$1,	$6
-	cmpult	$5,	$25,	$1
-	zapnot	$2,	15,	$5
-	addq	$1,	$6,	$6
-	addq	$3,	$6,	$6
-	addq	$23,	$6,	$23
-	cmpult	$23,	$6,	$1
-	srl	$4,	32,	$6
-	mulq	$5,	$6,	$25
-	mulq	$7,	$5,	$5
-	addq	$1,	$22,	$22
-	addq	$0,	$25,	$0
-	cmpult	$0,	$25,	$1
-	mulq	$6,	$8,	$6
-	beq	$1,	$245
-	sll	$20,	32,	$1
-	addq	$6,	$1,	$6
-$245:
-	sll	$0,	32,	$25
-	ldq	$2,	8($18)
-	addq	$5,	$25,	$5
-	bis	$5,	$5,	$7
-	ldq	$4,	32($17)
-	addq	$24,	$7,	$24
-	srl	$2,	32,	$8
-	cmpult	$24,	$7,	$3
-	zapnot	$4,	15,	$7
-	mulq	$8,	$7,	$28
-	srl	$0,	32,	$1
-	addq	$6,	$1,	$6
-	cmpult	$5,	$25,	$1
-	zapnot	$2,	15,	$5
-	addq	$1,	$6,	$6
-	addq	$3,	$6,	$6
-	addq	$23,	$6,	$23
-	cmpult	$23,	$6,	$1
-	srl	$4,	32,	$6
-	mulq	$5,	$6,	$25
-	mulq	$7,	$5,	$5
-	addq	$1,	$22,	$22
-	addq	$28,	$25,	$28
-	cmpult	$28,	$25,	$1
-	mulq	$6,	$8,	$6
-	beq	$1,	$249
-	sll	$20,	32,	$1
-	addq	$6,	$1,	$6
-$249:
-	sll	$28,	32,	$25
-	ldq	$2,	0($18)
-	addq	$5,	$25,	$5
-	bis	$5,	$5,	$7
-	ldq	$4,	40($17)
-	addq	$24,	$7,	$24
-	srl	$2,	32,	$8
-	cmpult	$24,	$7,	$3
-	zapnot	$4,	15,	$7
-	mulq	$8,	$7,	$0
-	srl	$28,	32,	$1
-	addq	$6,	$1,	$6
-	cmpult	$5,	$25,	$1
-	zapnot	$2,	15,	$5
-	addq	$1,	$6,	$6
-	addq	$3,	$6,	$6
-	addq	$23,	$6,	$23
-	cmpult	$23,	$6,	$1
-	srl	$4,	32,	$6
-	mulq	$5,	$6,	$25
-	mulq	$7,	$5,	$2
-	addq	$1,	$22,	$22
-	addq	$0,	$25,	$0
-	cmpult	$0,	$25,	$1
-	mulq	$6,	$8,	$6
-	beq	$1,	$253
-	sll	$20,	32,	$1
-	addq	$6,	$1,	$6
-$253:
-	sll	$0,	32,	$25
-	addq	$2,	$25,	$2
-	bis	$2,	$2,	$7
-	addq	$24,	$7,	$24
-	stq	$24,	40($16)
-	ldq	$4,	48($17)
-	ldq	$5,	0($18)
-	cmpult	$24,	$7,	$3
-	zapnot	$4,	15,	$7
-	srl	$5,	32,	$8
-	mulq	$8,	$7,	$28
-	srl	$0,	32,	$1
-	cmpult	$2,	$25,	$2
-	addq	$6,	$1,	$6
-	addq	$2,	$6,	$6
-	addq	$3,	$6,	$6
-	addq	$23,	$6,	$23
-	cmpult	$23,	$6,	$1
-	srl	$4,	32,	$6
-	zapnot	$5,	15,	$5
-	mulq	$5,	$6,	$24
-	mulq	$7,	$5,	$2
-	addq	$1,	$22,	$22
-	addq	$28,	$24,	$28
-	cmpult	$28,	$24,	$1
-	mulq	$6,	$8,	$6
-	beq	$1,	$257
-	sll	$20,	32,	$1
-	addq	$6,	$1,	$6
-$257:
-	sll	$28,	32,	$24
-	ldq	$1,	8($18)
-	addq	$2,	$24,	$2
-	bis	$2,	$2,	$7
-	ldq	$4,	40($17)
-	addq	$23,	$7,	$23
-	srl	$1,	32,	$8
-	cmpult	$23,	$7,	$3
-	zapnot	$4,	15,	$7
-	mulq	$8,	$7,	$25
-	zapnot	$1,	15,	$5
-	mulq	$7,	$5,	$0
-	srl	$28,	32,	$1
-	cmpult	$2,	$24,	$2
-	addq	$6,	$1,	$6
-	addq	$2,	$6,	$6
-	addq	$3,	$6,	$6
-	addq	$22,	$6,	$22
-	cmpult	$22,	$6,	$24
-	srl	$4,	32,	$6
-	mulq	$5,	$6,	$5
-	bis	$31,	1,	$21
-	addq	$25,	$5,	$25
-	cmpult	$25,	$5,	$1
-	mulq	$6,	$8,	$6
-	beq	$1,	$261
-	sll	$21,	32,	$1
-	addq	$6,	$1,	$6
-$261:
-	sll	$25,	32,	$5
-	ldq	$2,	16($18)
-	addq	$0,	$5,	$0
-	bis	$0,	$0,	$7
-	ldq	$4,	32($17)
-	addq	$23,	$7,	$23
-	srl	$2,	32,	$8
-	cmpult	$23,	$7,	$3
-	zapnot	$4,	15,	$7
-	mulq	$8,	$7,	$28
-	srl	$25,	32,	$1
-	addq	$6,	$1,	$6
-	cmpult	$0,	$5,	$1
-	zapnot	$2,	15,	$5
-	addq	$1,	$6,	$6
-	addq	$3,	$6,	$6
-	addq	$22,	$6,	$22
-	cmpult	$22,	$6,	$1
-	srl	$4,	32,	$6
-	mulq	$5,	$6,	$25
-	mulq	$7,	$5,	$5
-	addq	$1,	$24,	$24
-	addq	$28,	$25,	$28
-	cmpult	$28,	$25,	$1
-	mulq	$6,	$8,	$6
-	beq	$1,	$265
-	sll	$21,	32,	$1
-	addq	$6,	$1,	$6
-$265:
-	sll	$28,	32,	$25
-	ldq	$2,	24($18)
-	addq	$5,	$25,	$5
-	bis	$5,	$5,	$7
-	ldq	$4,	24($17)
-	addq	$23,	$7,	$23
-	srl	$2,	32,	$8
-	cmpult	$23,	$7,	$3
-	zapnot	$4,	15,	$7
-	mulq	$8,	$7,	$0
-	srl	$28,	32,	$1
-	addq	$6,	$1,	$6
-	cmpult	$5,	$25,	$1
-	zapnot	$2,	15,	$5
-	addq	$1,	$6,	$6
-	addq	$3,	$6,	$6
-	addq	$22,	$6,	$22
-	cmpult	$22,	$6,	$1
-	srl	$4,	32,	$6
-	mulq	$5,	$6,	$25
-	mulq	$7,	$5,	$5
-	addq	$1,	$24,	$24
-	addq	$0,	$25,	$0
-	cmpult	$0,	$25,	$1
-	mulq	$6,	$8,	$6
-	beq	$1,	$269
-	sll	$21,	32,	$1
-	addq	$6,	$1,	$6
-$269:
-	sll	$0,	32,	$25
-	ldq	$2,	32($18)
-	addq	$5,	$25,	$5
-	bis	$5,	$5,	$7
-	ldq	$4,	16($17)
-	addq	$23,	$7,	$23
-	srl	$2,	32,	$8
-	cmpult	$23,	$7,	$3
-	zapnot	$4,	15,	$7
-	mulq	$8,	$7,	$28
-	srl	$0,	32,	$1
-	addq	$6,	$1,	$6
-	cmpult	$5,	$25,	$1
-	zapnot	$2,	15,	$5
-	addq	$1,	$6,	$6
-	addq	$3,	$6,	$6
-	addq	$22,	$6,	$22
-	cmpult	$22,	$6,	$1
-	srl	$4,	32,	$6
-	mulq	$5,	$6,	$25
-	mulq	$7,	$5,	$5
-	addq	$1,	$24,	$24
-	addq	$28,	$25,	$28
-	cmpult	$28,	$25,	$1
-	mulq	$6,	$8,	$6
-	beq	$1,	$273
-	sll	$21,	32,	$1
-	addq	$6,	$1,	$6
-$273:
-	sll	$28,	32,	$25
-	ldq	$2,	40($18)
-	addq	$5,	$25,	$5
-	bis	$5,	$5,	$7
-	ldq	$4,	8($17)
-	addq	$23,	$7,	$23
-	srl	$2,	32,	$8
-	cmpult	$23,	$7,	$3
-	zapnot	$4,	15,	$7
-	mulq	$8,	$7,	$0
-	srl	$28,	32,	$1
-	addq	$6,	$1,	$6
-	cmpult	$5,	$25,	$1
-	zapnot	$2,	15,	$5
-	addq	$1,	$6,	$6
-	addq	$3,	$6,	$6
-	addq	$22,	$6,	$22
-	cmpult	$22,	$6,	$1
-	srl	$4,	32,	$6
-	mulq	$5,	$6,	$25
-	mulq	$7,	$5,	$5
-	addq	$1,	$24,	$24
-	addq	$0,	$25,	$0
-	cmpult	$0,	$25,	$1
-	mulq	$6,	$8,	$6
-	beq	$1,	$277
-	sll	$21,	32,	$1
-	addq	$6,	$1,	$6
-$277:
-	sll	$0,	32,	$25
-	ldq	$2,	48($18)
-	addq	$5,	$25,	$5
-	bis	$5,	$5,	$7
-	ldq	$4,	0($17)
-	addq	$23,	$7,	$23
-	srl	$2,	32,	$8
-	cmpult	$23,	$7,	$3
-	zapnot	$4,	15,	$7
-	mulq	$8,	$7,	$28
-	srl	$0,	32,	$1
-	addq	$6,	$1,	$6
-	cmpult	$5,	$25,	$1
-	zapnot	$2,	15,	$5
-	addq	$1,	$6,	$6
-	addq	$3,	$6,	$6
-	addq	$22,	$6,	$22
-	cmpult	$22,	$6,	$1
-	srl	$4,	32,	$6
-	mulq	$5,	$6,	$25
-	mulq	$7,	$5,	$2
-	addq	$1,	$24,	$24
-	addq	$28,	$25,	$28
-	cmpult	$28,	$25,	$1
-	mulq	$6,	$8,	$6
-	beq	$1,	$281
-	sll	$21,	32,	$1
-	addq	$6,	$1,	$6
-$281:
-	sll	$28,	32,	$25
-	addq	$2,	$25,	$2
-	bis	$2,	$2,	$7
-	addq	$23,	$7,	$23
-	stq	$23,	48($16)
-	ldq	$4,	0($17)
-	ldq	$5,	56($18)
-	cmpult	$23,	$7,	$3
-	zapnot	$4,	15,	$7
-	srl	$5,	32,	$8
-	mulq	$8,	$7,	$0
-	srl	$28,	32,	$1
-	cmpult	$2,	$25,	$2
-	addq	$6,	$1,	$6
-	addq	$2,	$6,	$6
-	addq	$3,	$6,	$6
-	addq	$22,	$6,	$22
-	cmpult	$22,	$6,	$1
-	srl	$4,	32,	$6
-	zapnot	$5,	15,	$5
-	mulq	$5,	$6,	$23
-	mulq	$7,	$5,	$2
-	addq	$1,	$24,	$24
-	addq	$0,	$23,	$0
-	cmpult	$0,	$23,	$1
-	mulq	$6,	$8,	$6
-	beq	$1,	$285
-	sll	$21,	32,	$1
-	addq	$6,	$1,	$6
-$285:
-	sll	$0,	32,	$23
-	ldq	$1,	48($18)
-	addq	$2,	$23,	$2
-	bis	$2,	$2,	$7
-	ldq	$4,	8($17)
-	addq	$22,	$7,	$22
-	srl	$1,	32,	$8
-	cmpult	$22,	$7,	$3
-	zapnot	$4,	15,	$7
-	mulq	$8,	$7,	$25
-	zapnot	$1,	15,	$5
-	mulq	$7,	$5,	$21
-	srl	$0,	32,	$1
-	cmpult	$2,	$23,	$2
-	addq	$6,	$1,	$6
-	addq	$2,	$6,	$6
-	addq	$3,	$6,	$6
-	addq	$24,	$6,	$24
-	cmpult	$24,	$6,	$23
-	srl	$4,	32,	$6
-	mulq	$5,	$6,	$5
-	bis	$31,	1,	$20
-	addq	$25,	$5,	$25
-	cmpult	$25,	$5,	$1
-	mulq	$6,	$8,	$6
-	beq	$1,	$289
-	sll	$20,	32,	$1
-	addq	$6,	$1,	$6
-$289:
-	sll	$25,	32,	$5
-	ldq	$2,	40($18)
-	addq	$21,	$5,	$21
-	bis	$21,	$21,	$7
-	ldq	$4,	16($17)
-	addq	$22,	$7,	$22
-	srl	$2,	32,	$8
-	cmpult	$22,	$7,	$3
-	zapnot	$4,	15,	$7
-	mulq	$8,	$7,	$28
-	srl	$25,	32,	$1
-	addq	$6,	$1,	$6
-	cmpult	$21,	$5,	$1
-	zapnot	$2,	15,	$5
-	addq	$1,	$6,	$6
-	addq	$3,	$6,	$6
-	addq	$24,	$6,	$24
-	cmpult	$24,	$6,	$1
-	srl	$4,	32,	$6
-	mulq	$5,	$6,	$25
-	mulq	$7,	$5,	$5
-	addq	$1,	$23,	$23
-	addq	$28,	$25,	$28
-	cmpult	$28,	$25,	$1
-	mulq	$6,	$8,	$6
-	beq	$1,	$293
-	sll	$20,	32,	$1
-	addq	$6,	$1,	$6
-$293:
-	sll	$28,	32,	$25
-	ldq	$2,	32($18)
-	addq	$5,	$25,	$5
-	bis	$5,	$5,	$7
-	ldq	$4,	24($17)
-	addq	$22,	$7,	$22
-	srl	$2,	32,	$8
-	cmpult	$22,	$7,	$3
-	zapnot	$4,	15,	$7
-	mulq	$8,	$7,	$0
-	srl	$28,	32,	$1
-	addq	$6,	$1,	$6
-	cmpult	$5,	$25,	$1
-	zapnot	$2,	15,	$5
-	addq	$1,	$6,	$6
-	addq	$3,	$6,	$6
-	addq	$24,	$6,	$24
-	cmpult	$24,	$6,	$1
-	srl	$4,	32,	$6
-	mulq	$5,	$6,	$25
-	mulq	$7,	$5,	$5
-	addq	$1,	$23,	$23
-	addq	$0,	$25,	$0
-	cmpult	$0,	$25,	$1
-	mulq	$6,	$8,	$6
-	beq	$1,	$297
-	sll	$20,	32,	$1
-	addq	$6,	$1,	$6
-$297:
-	sll	$0,	32,	$25
-	ldq	$2,	24($18)
-	addq	$5,	$25,	$5
-	bis	$5,	$5,	$7
-	ldq	$4,	32($17)
-	addq	$22,	$7,	$22
-	srl	$2,	32,	$8
-	cmpult	$22,	$7,	$3
-	zapnot	$4,	15,	$7
-	mulq	$8,	$7,	$28
-	srl	$0,	32,	$1
-	addq	$6,	$1,	$6
-	cmpult	$5,	$25,	$1
-	zapnot	$2,	15,	$5
-	addq	$1,	$6,	$6
-	addq	$3,	$6,	$6
-	addq	$24,	$6,	$24
-	cmpult	$24,	$6,	$1
-	srl	$4,	32,	$6
-	mulq	$5,	$6,	$25
-	mulq	$7,	$5,	$5
-	addq	$1,	$23,	$23
-	addq	$28,	$25,	$28
-	cmpult	$28,	$25,	$1
-	mulq	$6,	$8,	$6
-	beq	$1,	$301
-	sll	$20,	32,	$1
-	addq	$6,	$1,	$6
-$301:
-	sll	$28,	32,	$25
-	ldq	$2,	16($18)
-	addq	$5,	$25,	$5
-	bis	$5,	$5,	$7
-	ldq	$4,	40($17)
-	addq	$22,	$7,	$22
-	srl	$2,	32,	$8
-	cmpult	$22,	$7,	$3
-	zapnot	$4,	15,	$7
-	mulq	$8,	$7,	$0
-	srl	$28,	32,	$1
-	addq	$6,	$1,	$6
-	cmpult	$5,	$25,	$1
-	zapnot	$2,	15,	$5
-	addq	$1,	$6,	$6
-	addq	$3,	$6,	$6
-	addq	$24,	$6,	$24
-	cmpult	$24,	$6,	$1
-	srl	$4,	32,	$6
-	mulq	$5,	$6,	$25
-	mulq	$7,	$5,	$5
-	addq	$1,	$23,	$23
-	addq	$0,	$25,	$0
-	cmpult	$0,	$25,	$1
-	mulq	$6,	$8,	$6
-	beq	$1,	$305
-	sll	$20,	32,	$1
-	addq	$6,	$1,	$6
-$305:
-	sll	$0,	32,	$25
-	ldq	$2,	8($18)
-	addq	$5,	$25,	$5
-	bis	$5,	$5,	$7
-	ldq	$4,	48($17)
-	addq	$22,	$7,	$22
-	srl	$2,	32,	$8
-	cmpult	$22,	$7,	$3
-	zapnot	$4,	15,	$7
-	mulq	$8,	$7,	$28
-	srl	$0,	32,	$1
-	addq	$6,	$1,	$6
-	cmpult	$5,	$25,	$1
-	zapnot	$2,	15,	$5
-	addq	$1,	$6,	$6
-	addq	$3,	$6,	$6
-	addq	$24,	$6,	$24
-	cmpult	$24,	$6,	$1
-	srl	$4,	32,	$6
-	mulq	$5,	$6,	$25
-	mulq	$7,	$5,	$5
-	addq	$1,	$23,	$23
-	addq	$28,	$25,	$28
-	cmpult	$28,	$25,	$1
-	mulq	$6,	$8,	$6
-	beq	$1,	$309
-	sll	$20,	32,	$1
-	addq	$6,	$1,	$6
-$309:
-	sll	$28,	32,	$25
-	ldq	$2,	0($18)
-	addq	$5,	$25,	$5
-	bis	$5,	$5,	$7
-	ldq	$4,	56($17)
-	addq	$22,	$7,	$22
-	srl	$2,	32,	$8
-	cmpult	$22,	$7,	$3
-	zapnot	$4,	15,	$7
-	mulq	$8,	$7,	$0
-	srl	$28,	32,	$1
-	addq	$6,	$1,	$6
-	cmpult	$5,	$25,	$1
-	zapnot	$2,	15,	$5
-	addq	$1,	$6,	$6
-	addq	$3,	$6,	$6
-	addq	$24,	$6,	$24
-	cmpult	$24,	$6,	$1
-	srl	$4,	32,	$6
-	mulq	$5,	$6,	$25
-	mulq	$7,	$5,	$2
-	addq	$1,	$23,	$23
-	addq	$0,	$25,	$0
-	cmpult	$0,	$25,	$1
-	mulq	$6,	$8,	$6
-	beq	$1,	$313
-	sll	$20,	32,	$1
-	addq	$6,	$1,	$6
-$313:
-	sll	$0,	32,	$25
-	addq	$2,	$25,	$2
-	bis	$2,	$2,	$7
-	addq	$22,	$7,	$22
-	stq	$22,	56($16)
-	ldq	$4,	56($17)
-	ldq	$5,	8($18)
-	cmpult	$22,	$7,	$3
-	zapnot	$4,	15,	$7
-	srl	$5,	32,	$8
-	mulq	$8,	$7,	$28
-	srl	$0,	32,	$1
-	cmpult	$2,	$25,	$2
-	addq	$6,	$1,	$6
-	addq	$2,	$6,	$6
-	addq	$3,	$6,	$6
-	addq	$24,	$6,	$24
-	cmpult	$24,	$6,	$1
-	srl	$4,	32,	$6
-	zapnot	$5,	15,	$5
-	mulq	$5,	$6,	$22
-	mulq	$7,	$5,	$2
-	addq	$1,	$23,	$23
-	addq	$28,	$22,	$28
-	cmpult	$28,	$22,	$1
-	mulq	$6,	$8,	$6
-	beq	$1,	$317
-	sll	$20,	32,	$1
-	addq	$6,	$1,	$6
-$317:
-	sll	$28,	32,	$22
-	ldq	$1,	16($18)
-	addq	$2,	$22,	$2
-	bis	$2,	$2,	$7
-	ldq	$4,	48($17)
-	addq	$24,	$7,	$24
-	srl	$1,	32,	$8
-	cmpult	$24,	$7,	$3
-	zapnot	$4,	15,	$7
-	mulq	$8,	$7,	$25
-	zapnot	$1,	15,	$5
-	mulq	$7,	$5,	$0
-	srl	$28,	32,	$1
-	cmpult	$2,	$22,	$2
-	addq	$6,	$1,	$6
-	addq	$2,	$6,	$6
-	addq	$3,	$6,	$6
-	addq	$23,	$6,	$23
-	cmpult	$23,	$6,	$22
-	srl	$4,	32,	$6
-	mulq	$5,	$6,	$5
-	bis	$31,	1,	$21
-	addq	$25,	$5,	$25
-	cmpult	$25,	$5,	$1
-	mulq	$6,	$8,	$6
-	beq	$1,	$321
-	sll	$21,	32,	$1
-	addq	$6,	$1,	$6
-$321:
-	sll	$25,	32,	$5
-	ldq	$2,	24($18)
-	addq	$0,	$5,	$0
-	bis	$0,	$0,	$7
-	ldq	$4,	40($17)
-	addq	$24,	$7,	$24
-	srl	$2,	32,	$8
-	cmpult	$24,	$7,	$3
-	zapnot	$4,	15,	$7
-	mulq	$8,	$7,	$28
-	srl	$25,	32,	$1
-	addq	$6,	$1,	$6
-	cmpult	$0,	$5,	$1
-	zapnot	$2,	15,	$5
-	addq	$1,	$6,	$6
-	addq	$3,	$6,	$6
-	addq	$23,	$6,	$23
-	cmpult	$23,	$6,	$1
-	srl	$4,	32,	$6
-	mulq	$5,	$6,	$25
-	mulq	$7,	$5,	$5
-	addq	$1,	$22,	$22
-	addq	$28,	$25,	$28
-	cmpult	$28,	$25,	$1
-	mulq	$6,	$8,	$6
-	beq	$1,	$325
-	sll	$21,	32,	$1
-	addq	$6,	$1,	$6
-$325:
-	sll	$28,	32,	$25
-	ldq	$2,	32($18)
-	addq	$5,	$25,	$5
-	bis	$5,	$5,	$7
-	ldq	$4,	32($17)
-	addq	$24,	$7,	$24
-	srl	$2,	32,	$8
-	cmpult	$24,	$7,	$3
-	zapnot	$4,	15,	$7
-	mulq	$8,	$7,	$0
-	srl	$28,	32,	$1
-	addq	$6,	$1,	$6
-	cmpult	$5,	$25,	$1
-	zapnot	$2,	15,	$5
-	addq	$1,	$6,	$6
-	addq	$3,	$6,	$6
-	addq	$23,	$6,	$23
-	cmpult	$23,	$6,	$1
-	srl	$4,	32,	$6
-	mulq	$5,	$6,	$25
-	mulq	$7,	$5,	$5
-	addq	$1,	$22,	$22
-	addq	$0,	$25,	$0
-	cmpult	$0,	$25,	$1
-	mulq	$6,	$8,	$6
-	beq	$1,	$329
-	sll	$21,	32,	$1
-	addq	$6,	$1,	$6
-$329:
-	sll	$0,	32,	$25
-	ldq	$2,	40($18)
-	addq	$5,	$25,	$5
-	bis	$5,	$5,	$7
-	ldq	$4,	24($17)
-	addq	$24,	$7,	$24
-	srl	$2,	32,	$8
-	cmpult	$24,	$7,	$3
-	zapnot	$4,	15,	$7
-	mulq	$8,	$7,	$28
-	srl	$0,	32,	$1
-	addq	$6,	$1,	$6
-	cmpult	$5,	$25,	$1
-	zapnot	$2,	15,	$5
-	addq	$1,	$6,	$6
-	addq	$3,	$6,	$6
-	addq	$23,	$6,	$23
-	cmpult	$23,	$6,	$1
-	srl	$4,	32,	$6
-	mulq	$5,	$6,	$25
-	mulq	$7,	$5,	$5
-	addq	$1,	$22,	$22
-	addq	$28,	$25,	$28
-	cmpult	$28,	$25,	$1
-	mulq	$6,	$8,	$6
-	beq	$1,	$333
-	sll	$21,	32,	$1
-	addq	$6,	$1,	$6
-$333:
-	sll	$28,	32,	$25
-	ldq	$2,	48($18)
-	addq	$5,	$25,	$5
-	bis	$5,	$5,	$7
-	ldq	$4,	16($17)
-	addq	$24,	$7,	$24
-	srl	$2,	32,	$8
-	cmpult	$24,	$7,	$3
-	zapnot	$4,	15,	$7
-	mulq	$8,	$7,	$0
-	srl	$28,	32,	$1
-	addq	$6,	$1,	$6
-	cmpult	$5,	$25,	$1
-	zapnot	$2,	15,	$5
-	addq	$1,	$6,	$6
-	addq	$3,	$6,	$6
-	addq	$23,	$6,	$23
-	cmpult	$23,	$6,	$1
-	srl	$4,	32,	$6
-	mulq	$5,	$6,	$25
-	mulq	$7,	$5,	$5
-	addq	$1,	$22,	$22
-	addq	$0,	$25,	$0
-	cmpult	$0,	$25,	$1
-	mulq	$6,	$8,	$6
-	beq	$1,	$337
-	sll	$21,	32,	$1
-	addq	$6,	$1,	$6
-$337:
-	sll	$0,	32,	$25
-	ldq	$2,	56($18)
-	addq	$5,	$25,	$5
-	bis	$5,	$5,	$7
-	ldq	$4,	8($17)
-	addq	$24,	$7,	$24
-	srl	$2,	32,	$8
-	cmpult	$24,	$7,	$3
-	zapnot	$4,	15,	$7
-	mulq	$8,	$7,	$28
-	srl	$0,	32,	$1
-	addq	$6,	$1,	$6
-	cmpult	$5,	$25,	$1
-	zapnot	$2,	15,	$5
-	addq	$1,	$6,	$6
-	addq	$3,	$6,	$6
-	addq	$23,	$6,	$23
-	cmpult	$23,	$6,	$1
-	srl	$4,	32,	$6
-	mulq	$5,	$6,	$25
-	mulq	$7,	$5,	$2
-	addq	$1,	$22,	$22
-	addq	$28,	$25,	$28
-	cmpult	$28,	$25,	$1
-	mulq	$6,	$8,	$6
-	beq	$1,	$341
-	sll	$21,	32,	$1
-	addq	$6,	$1,	$6
-$341:
-	sll	$28,	32,	$25
-	addq	$2,	$25,	$2
-	bis	$2,	$2,	$7
-	addq	$24,	$7,	$24
-	stq	$24,	64($16)
-	ldq	$4,	16($17)
-	ldq	$5,	56($18)
-	cmpult	$24,	$7,	$3
-	zapnot	$4,	15,	$7
-	srl	$5,	32,	$8
-	mulq	$8,	$7,	$0
-	srl	$28,	32,	$1
-	cmpult	$2,	$25,	$2
-	addq	$6,	$1,	$6
-	addq	$2,	$6,	$6
-	addq	$3,	$6,	$6
-	addq	$23,	$6,	$23
-	cmpult	$23,	$6,	$1
-	srl	$4,	32,	$6
-	zapnot	$5,	15,	$5
-	mulq	$5,	$6,	$24
-	mulq	$7,	$5,	$2
-	addq	$1,	$22,	$22
-	addq	$0,	$24,	$0
-	cmpult	$0,	$24,	$1
-	mulq	$6,	$8,	$6
-	beq	$1,	$345
-	sll	$21,	32,	$1
-	addq	$6,	$1,	$6
-$345:
-	sll	$0,	32,	$24
-	ldq	$1,	48($18)
-	addq	$2,	$24,	$2
-	bis	$2,	$2,	$7
-	ldq	$4,	24($17)
-	addq	$23,	$7,	$23
-	srl	$1,	32,	$8
-	cmpult	$23,	$7,	$3
-	zapnot	$4,	15,	$7
-	mulq	$8,	$7,	$25
-	zapnot	$1,	15,	$5
-	mulq	$7,	$5,	$21
-	srl	$0,	32,	$1
-	cmpult	$2,	$24,	$2
-	addq	$6,	$1,	$6
-	addq	$2,	$6,	$6
-	addq	$3,	$6,	$6
-	addq	$22,	$6,	$22
-	cmpult	$22,	$6,	$24
-	srl	$4,	32,	$6
-	mulq	$5,	$6,	$5
-	bis	$31,	1,	$20
-	addq	$25,	$5,	$25
-	cmpult	$25,	$5,	$1
-	mulq	$6,	$8,	$6
-	beq	$1,	$349
-	sll	$20,	32,	$1
-	addq	$6,	$1,	$6
-$349:
-	sll	$25,	32,	$5
-	ldq	$2,	40($18)
-	addq	$21,	$5,	$21
-	bis	$21,	$21,	$7
-	ldq	$4,	32($17)
-	addq	$23,	$7,	$23
-	srl	$2,	32,	$8
-	cmpult	$23,	$7,	$3
-	zapnot	$4,	15,	$7
-	mulq	$8,	$7,	$28
-	srl	$25,	32,	$1
-	addq	$6,	$1,	$6
-	cmpult	$21,	$5,	$1
-	zapnot	$2,	15,	$5
-	addq	$1,	$6,	$6
-	addq	$3,	$6,	$6
-	addq	$22,	$6,	$22
-	cmpult	$22,	$6,	$1
-	srl	$4,	32,	$6
-	mulq	$5,	$6,	$25
-	mulq	$7,	$5,	$5
-	addq	$1,	$24,	$24
-	addq	$28,	$25,	$28
-	cmpult	$28,	$25,	$1
-	mulq	$6,	$8,	$6
-	beq	$1,	$353
-	sll	$20,	32,	$1
-	addq	$6,	$1,	$6
-$353:
-	sll	$28,	32,	$25
-	ldq	$2,	32($18)
-	addq	$5,	$25,	$5
-	bis	$5,	$5,	$7
-	ldq	$4,	40($17)
-	addq	$23,	$7,	$23
-	srl	$2,	32,	$8
-	cmpult	$23,	$7,	$3
-	zapnot	$4,	15,	$7
-	mulq	$8,	$7,	$0
-	srl	$28,	32,	$1
-	addq	$6,	$1,	$6
-	cmpult	$5,	$25,	$1
-	zapnot	$2,	15,	$5
-	addq	$1,	$6,	$6
-	addq	$3,	$6,	$6
-	addq	$22,	$6,	$22
-	cmpult	$22,	$6,	$1
-	srl	$4,	32,	$6
-	mulq	$5,	$6,	$25
-	mulq	$7,	$5,	$5
-	addq	$1,	$24,	$24
-	addq	$0,	$25,	$0
-	cmpult	$0,	$25,	$1
-	mulq	$6,	$8,	$6
-	beq	$1,	$357
-	sll	$20,	32,	$1
-	addq	$6,	$1,	$6
-$357:
-	sll	$0,	32,	$25
-	ldq	$2,	24($18)
-	addq	$5,	$25,	$5
-	bis	$5,	$5,	$7
-	ldq	$4,	48($17)
-	addq	$23,	$7,	$23
-	srl	$2,	32,	$8
-	cmpult	$23,	$7,	$3
-	zapnot	$4,	15,	$7
-	mulq	$8,	$7,	$28
-	srl	$0,	32,	$1
-	addq	$6,	$1,	$6
-	cmpult	$5,	$25,	$1
-	zapnot	$2,	15,	$5
-	addq	$1,	$6,	$6
-	addq	$3,	$6,	$6
-	addq	$22,	$6,	$22
-	cmpult	$22,	$6,	$1
-	srl	$4,	32,	$6
-	mulq	$5,	$6,	$25
-	mulq	$7,	$5,	$5
-	addq	$1,	$24,	$24
-	addq	$28,	$25,	$28
-	cmpult	$28,	$25,	$1
-	mulq	$6,	$8,	$6
-	beq	$1,	$361
-	sll	$20,	32,	$1
-	addq	$6,	$1,	$6
-$361:
-	sll	$28,	32,	$25
-	ldq	$2,	16($18)
-	addq	$5,	$25,	$5
-	bis	$5,	$5,	$7
-	ldq	$4,	56($17)
-	addq	$23,	$7,	$23
-	srl	$2,	32,	$8
-	cmpult	$23,	$7,	$3
-	zapnot	$4,	15,	$7
-	mulq	$8,	$7,	$0
-	srl	$28,	32,	$1
-	addq	$6,	$1,	$6
-	cmpult	$5,	$25,	$1
-	zapnot	$2,	15,	$5
-	addq	$1,	$6,	$6
-	addq	$3,	$6,	$6
-	addq	$22,	$6,	$22
-	cmpult	$22,	$6,	$1
-	srl	$4,	32,	$6
-	mulq	$5,	$6,	$25
-	mulq	$7,	$5,	$2
-	addq	$1,	$24,	$24
-	addq	$0,	$25,	$0
-	cmpult	$0,	$25,	$1
-	mulq	$6,	$8,	$6
-	beq	$1,	$365
-	sll	$20,	32,	$1
-	addq	$6,	$1,	$6
-$365:
-	sll	$0,	32,	$25
-	addq	$2,	$25,	$2
-	bis	$2,	$2,	$7
-	addq	$23,	$7,	$23
-	stq	$23,	72($16)
-	ldq	$4,	56($17)
-	ldq	$5,	24($18)
-	cmpult	$23,	$7,	$3
-	zapnot	$4,	15,	$7
-	srl	$5,	32,	$8
-	mulq	$8,	$7,	$28
-	srl	$0,	32,	$1
-	cmpult	$2,	$25,	$2
-	addq	$6,	$1,	$6
-	addq	$2,	$6,	$6
-	addq	$3,	$6,	$6
-	addq	$22,	$6,	$22
-	cmpult	$22,	$6,	$1
-	srl	$4,	32,	$6
-	zapnot	$5,	15,	$5
-	mulq	$5,	$6,	$23
-	mulq	$7,	$5,	$2
-	addq	$1,	$24,	$24
-	addq	$28,	$23,	$28
-	cmpult	$28,	$23,	$1
-	mulq	$6,	$8,	$6
-	beq	$1,	$369
-	sll	$20,	32,	$1
-	addq	$6,	$1,	$6
-$369:
-	sll	$28,	32,	$23
-	ldq	$1,	32($18)
-	addq	$2,	$23,	$2
-	bis	$2,	$2,	$7
-	ldq	$4,	48($17)
-	addq	$22,	$7,	$22
-	srl	$1,	32,	$8
-	cmpult	$22,	$7,	$3
-	zapnot	$4,	15,	$7
-	mulq	$8,	$7,	$25
-	zapnot	$1,	15,	$5
-	mulq	$7,	$5,	$0
-	srl	$28,	32,	$1
-	cmpult	$2,	$23,	$2
-	addq	$6,	$1,	$6
-	addq	$2,	$6,	$6
-	addq	$3,	$6,	$6
-	addq	$24,	$6,	$24
-	cmpult	$24,	$6,	$23
-	srl	$4,	32,	$6
-	mulq	$5,	$6,	$5
-	bis	$31,	1,	$21
-	addq	$25,	$5,	$25
-	cmpult	$25,	$5,	$1
-	mulq	$6,	$8,	$6
-	beq	$1,	$373
-	sll	$21,	32,	$1
-	addq	$6,	$1,	$6
-$373:
-	sll	$25,	32,	$5
-	ldq	$2,	40($18)
-	addq	$0,	$5,	$0
-	bis	$0,	$0,	$7
-	ldq	$4,	40($17)
-	addq	$22,	$7,	$22
-	srl	$2,	32,	$8
-	cmpult	$22,	$7,	$3
-	zapnot	$4,	15,	$7
-	mulq	$8,	$7,	$28
-	srl	$25,	32,	$1
-	addq	$6,	$1,	$6
-	cmpult	$0,	$5,	$1
-	zapnot	$2,	15,	$5
-	addq	$1,	$6,	$6
-	addq	$3,	$6,	$6
-	addq	$24,	$6,	$24
-	cmpult	$24,	$6,	$1
-	srl	$4,	32,	$6
-	mulq	$5,	$6,	$25
-	mulq	$7,	$5,	$5
-	addq	$1,	$23,	$23
-	addq	$28,	$25,	$28
-	cmpult	$28,	$25,	$1
-	mulq	$6,	$8,	$6
-	beq	$1,	$377
-	sll	$21,	32,	$1
-	addq	$6,	$1,	$6
-$377:
-	sll	$28,	32,	$25
-	ldq	$2,	48($18)
-	addq	$5,	$25,	$5
-	bis	$5,	$5,	$7
-	ldq	$4,	32($17)
-	addq	$22,	$7,	$22
-	srl	$2,	32,	$8
-	cmpult	$22,	$7,	$3
-	zapnot	$4,	15,	$7
-	mulq	$8,	$7,	$0
-	srl	$28,	32,	$1
-	addq	$6,	$1,	$6
-	cmpult	$5,	$25,	$1
-	zapnot	$2,	15,	$5
-	addq	$1,	$6,	$6
-	addq	$3,	$6,	$6
-	addq	$24,	$6,	$24
-	cmpult	$24,	$6,	$1
-	srl	$4,	32,	$6
-	mulq	$5,	$6,	$25
-	mulq	$7,	$5,	$5
-	addq	$1,	$23,	$23
-	addq	$0,	$25,	$0
-	cmpult	$0,	$25,	$1
-	mulq	$6,	$8,	$6
-	beq	$1,	$381
-	sll	$21,	32,	$1
-	addq	$6,	$1,	$6
-$381:
-	sll	$0,	32,	$25
-	ldq	$2,	56($18)
-	addq	$5,	$25,	$5
-	bis	$5,	$5,	$7
-	ldq	$4,	24($17)
-	addq	$22,	$7,	$22
-	srl	$2,	32,	$8
-	cmpult	$22,	$7,	$3
-	zapnot	$4,	15,	$7
-	mulq	$8,	$7,	$28
-	srl	$0,	32,	$1
-	addq	$6,	$1,	$6
-	cmpult	$5,	$25,	$1
-	zapnot	$2,	15,	$5
-	addq	$1,	$6,	$6
-	addq	$3,	$6,	$6
-	addq	$24,	$6,	$24
-	cmpult	$24,	$6,	$1
-	srl	$4,	32,	$6
-	mulq	$5,	$6,	$25
-	mulq	$7,	$5,	$2
-	addq	$1,	$23,	$23
-	addq	$28,	$25,	$28
-	cmpult	$28,	$25,	$1
-	mulq	$6,	$8,	$6
-	beq	$1,	$385
-	sll	$21,	32,	$1
-	addq	$6,	$1,	$6
-$385:
-	sll	$28,	32,	$25
-	addq	$2,	$25,	$2
-	bis	$2,	$2,	$7
-	addq	$22,	$7,	$22
-	stq	$22,	80($16)
-	ldq	$4,	32($17)
-	ldq	$5,	56($18)
-	cmpult	$22,	$7,	$3
-	zapnot	$4,	15,	$7
-	srl	$5,	32,	$8
-	mulq	$8,	$7,	$0
-	srl	$28,	32,	$1
-	cmpult	$2,	$25,	$2
-	addq	$6,	$1,	$6
-	addq	$2,	$6,	$6
-	addq	$3,	$6,	$6
-	addq	$24,	$6,	$24
-	cmpult	$24,	$6,	$1
-	srl	$4,	32,	$6
-	zapnot	$5,	15,	$5
-	mulq	$5,	$6,	$22
-	mulq	$7,	$5,	$2
-	addq	$1,	$23,	$23
-	addq	$0,	$22,	$0
-	cmpult	$0,	$22,	$1
-	mulq	$6,	$8,	$6
-	beq	$1,	$389
-	sll	$21,	32,	$1
-	addq	$6,	$1,	$6
-$389:
-	sll	$0,	32,	$22
-	ldq	$1,	48($18)
-	addq	$2,	$22,	$2
-	bis	$2,	$2,	$7
-	ldq	$4,	40($17)
-	addq	$24,	$7,	$24
-	srl	$1,	32,	$8
-	cmpult	$24,	$7,	$3
-	zapnot	$4,	15,	$7
-	mulq	$8,	$7,	$25
-	zapnot	$1,	15,	$5
-	mulq	$7,	$5,	$21
-	srl	$0,	32,	$1
-	cmpult	$2,	$22,	$2
-	addq	$6,	$1,	$6
-	addq	$2,	$6,	$6
-	addq	$3,	$6,	$6
-	addq	$23,	$6,	$23
-	cmpult	$23,	$6,	$22
-	srl	$4,	32,	$6
-	mulq	$5,	$6,	$5
-	bis	$31,	1,	$20
-	addq	$25,	$5,	$25
-	cmpult	$25,	$5,	$1
-	mulq	$6,	$8,	$6
-	beq	$1,	$393
-	sll	$20,	32,	$1
-	addq	$6,	$1,	$6
-$393:
-	sll	$25,	32,	$5
-	ldq	$2,	40($18)
-	addq	$21,	$5,	$21
-	bis	$21,	$21,	$7
-	ldq	$4,	48($17)
-	addq	$24,	$7,	$24
-	srl	$2,	32,	$8
-	cmpult	$24,	$7,	$3
-	zapnot	$4,	15,	$7
-	mulq	$8,	$7,	$28
-	srl	$25,	32,	$1
-	addq	$6,	$1,	$6
-	cmpult	$21,	$5,	$1
-	zapnot	$2,	15,	$5
-	addq	$1,	$6,	$6
-	addq	$3,	$6,	$6
-	addq	$23,	$6,	$23
-	cmpult	$23,	$6,	$1
-	srl	$4,	32,	$6
-	mulq	$5,	$6,	$25
-	mulq	$7,	$5,	$5
-	addq	$1,	$22,	$22
-	addq	$28,	$25,	$28
-	cmpult	$28,	$25,	$1
-	mulq	$6,	$8,	$6
-	beq	$1,	$397
-	sll	$20,	32,	$1
-	addq	$6,	$1,	$6
-$397:
-	sll	$28,	32,	$25
-	ldq	$2,	32($18)
-	addq	$5,	$25,	$5
-	bis	$5,	$5,	$7
-	ldq	$4,	56($17)
-	addq	$24,	$7,	$24
-	srl	$2,	32,	$8
-	cmpult	$24,	$7,	$3
-	zapnot	$4,	15,	$7
-	mulq	$8,	$7,	$21
-	srl	$28,	32,	$1
-	addq	$6,	$1,	$6
-	cmpult	$5,	$25,	$1
-	zapnot	$2,	15,	$5
-	addq	$1,	$6,	$6
-	addq	$3,	$6,	$6
-	addq	$23,	$6,	$23
-	cmpult	$23,	$6,	$1
-	srl	$4,	32,	$6
-	mulq	$5,	$6,	$25
-	mulq	$7,	$5,	$2
-	addq	$1,	$22,	$22
-	addq	$21,	$25,	$21
-	cmpult	$21,	$25,	$1
-	mulq	$6,	$8,	$6
-	beq	$1,	$401
-	sll	$20,	32,	$1
-	addq	$6,	$1,	$6
-$401:
-	sll	$21,	32,	$25
-	addq	$2,	$25,	$2
-	bis	$2,	$2,	$7
-	addq	$24,	$7,	$24
-	stq	$24,	88($16)
-	ldq	$4,	56($17)
-	ldq	$5,	40($18)
-	cmpult	$24,	$7,	$3
-	zapnot	$4,	15,	$7
-	srl	$5,	32,	$8
-	mulq	$8,	$7,	$0
-	srl	$21,	32,	$1
-	cmpult	$2,	$25,	$2
-	addq	$6,	$1,	$6
-	addq	$2,	$6,	$6
-	addq	$3,	$6,	$6
-	addq	$23,	$6,	$23
-	cmpult	$23,	$6,	$1
-	srl	$4,	32,	$6
-	zapnot	$5,	15,	$5
-	mulq	$5,	$6,	$24
-	mulq	$7,	$5,	$5
-	addq	$1,	$22,	$22
-	addq	$0,	$24,	$0
-	cmpult	$0,	$24,	$1
-	mulq	$6,	$8,	$6
-	beq	$1,	$405
-	sll	$20,	32,	$1
-	addq	$6,	$1,	$6
-$405:
-	sll	$0,	32,	$24
-	ldq	$2,	48($18)
-	addq	$5,	$24,	$5
-	bis	$5,	$5,	$7
-	ldq	$4,	48($17)
-	addq	$23,	$7,	$23
-	srl	$2,	32,	$8
-	cmpult	$23,	$7,	$3
-	zapnot	$4,	15,	$7
-	mulq	$8,	$7,	$28
-	srl	$0,	32,	$1
-	addq	$6,	$1,	$6
-	cmpult	$5,	$24,	$1
-	zapnot	$2,	15,	$5
-	addq	$1,	$6,	$6
-	addq	$3,	$6,	$6
-	addq	$22,	$6,	$22
-	cmpult	$22,	$6,	$24
-	srl	$4,	32,	$6
-	mulq	$5,	$6,	$25
-	mulq	$7,	$5,	$5
-	addq	$28,	$25,	$28
-	cmpult	$28,	$25,	$1
-	mulq	$6,	$8,	$6
-	beq	$1,	$409
-	sll	$20,	32,	$1
-	addq	$6,	$1,	$6
-$409:
-	sll	$28,	32,	$25
-	ldq	$2,	56($18)
-	addq	$5,	$25,	$5
-	bis	$5,	$5,	$7
-	ldq	$4,	40($17)
-	addq	$23,	$7,	$23
-	srl	$2,	32,	$8
-	cmpult	$23,	$7,	$3
-	zapnot	$4,	15,	$7
-	mulq	$8,	$7,	$0
-	srl	$28,	32,	$1
-	addq	$6,	$1,	$6
-	cmpult	$5,	$25,	$1
-	zapnot	$2,	15,	$5
-	addq	$1,	$6,	$6
-	addq	$3,	$6,	$6
-	addq	$22,	$6,	$22
-	cmpult	$22,	$6,	$1
-	srl	$4,	32,	$6
-	mulq	$5,	$6,	$25
-	mulq	$7,	$5,	$2
-	addq	$1,	$24,	$24
-	addq	$0,	$25,	$0
-	cmpult	$0,	$25,	$1
-	mulq	$6,	$8,	$6
-	beq	$1,	$413
-	sll	$20,	32,	$1
-	addq	$6,	$1,	$6
-$413:
-	sll	$0,	32,	$25
-	addq	$2,	$25,	$2
-	bis	$2,	$2,	$7
-	addq	$23,	$7,	$23
-	stq	$23,	96($16)
-	ldq	$4,	48($17)
-	ldq	$5,	56($18)
-	cmpult	$23,	$7,	$3
-	zapnot	$4,	15,	$7
-	srl	$5,	32,	$8
-	mulq	$8,	$7,	$28
-	srl	$0,	32,	$1
-	cmpult	$2,	$25,	$2
-	addq	$6,	$1,	$6
-	addq	$2,	$6,	$6
-	addq	$3,	$6,	$6
-	addq	$22,	$6,	$22
-	cmpult	$22,	$6,	$1
-	srl	$4,	32,	$6
-	zapnot	$5,	15,	$5
-	mulq	$5,	$6,	$23
-	mulq	$7,	$5,	$5
-	addq	$1,	$24,	$24
-	addq	$28,	$23,	$28
-	cmpult	$28,	$23,	$1
-	mulq	$6,	$8,	$6
-	beq	$1,	$417
-	sll	$20,	32,	$1
-	addq	$6,	$1,	$6
-$417:
-	sll	$28,	32,	$23
-	ldq	$2,	48($18)
-	addq	$5,	$23,	$5
-	bis	$5,	$5,	$7
-	ldq	$4,	56($17)
-	addq	$22,	$7,	$22
-	srl	$2,	32,	$8
-	cmpult	$22,	$7,	$3
-	zapnot	$4,	15,	$7
-	mulq	$8,	$7,	$0
-	srl	$28,	32,	$1
-	addq	$6,	$1,	$6
-	cmpult	$5,	$23,	$1
-	zapnot	$2,	15,	$5
-	addq	$1,	$6,	$6
-	addq	$3,	$6,	$6
-	addq	$24,	$6,	$24
-	cmpult	$24,	$6,	$23
-	srl	$4,	32,	$6
-	mulq	$5,	$6,	$25
-	mulq	$7,	$5,	$2
-	addq	$0,	$25,	$0
-	cmpult	$0,	$25,	$1
-	mulq	$6,	$8,	$6
-	beq	$1,	$421
-	sll	$20,	32,	$1
-	addq	$6,	$1,	$6
-$421:
-	sll	$0,	32,	$25
-	addq	$2,	$25,	$2
-	bis	$2,	$2,	$7
-	addq	$22,	$7,	$22
-	stq	$22,	104($16)
-	ldq	$4,	56($17)
-	ldq	$5,	56($18)
-	cmpult	$22,	$7,	$3
-	zapnot	$4,	15,	$7
-	srl	$5,	32,	$8
-	mulq	$8,	$7,	$28
-	srl	$0,	32,	$1
-	cmpult	$2,	$25,	$2
-	addq	$6,	$1,	$6
-	addq	$2,	$6,	$6
-	addq	$3,	$6,	$6
-	addq	$24,	$6,	$24
-	cmpult	$24,	$6,	$1
-	srl	$4,	32,	$6
-	zapnot	$5,	15,	$5
-	mulq	$5,	$6,	$22
-	mulq	$7,	$5,	$2
-	addq	$1,	$23,	$23
-	addq	$28,	$22,	$28
-	cmpult	$28,	$22,	$1
-	mulq	$6,	$8,	$3
-	beq	$1,	$425
-	sll	$20,	32,	$1
-	addq	$3,	$1,	$3
-$425:
-	sll	$28,	32,	$22
-	srl	$28,	32,	$1
-	addq	$2,	$22,	$2
-	addq	$3,	$1,	$3
-	bis	$2,	$2,	$7
-	addq	$24,	$7,	$24
-	cmpult	$7,	$22,	$1
-	cmpult	$24,	$7,	$2
-	addq	$1,	$3,	$6
-	addq	$2,	$6,	$6
-	stq	$24,	112($16)
-	addq	$23,	$6,	$23
-	stq	$23,	120($16)
-	ret	$31,	($26),	1
-	.end bn_mul_comba8
-	.text
-	.align 3
-	.globl bn_sqr_comba4
-	.ent bn_sqr_comba4
-bn_sqr_comba4:
-bn_sqr_comba4..ng:
-	.frame $30,0,$26,0
-	.prologue 0
-
-	ldq	$0,	0($17)
-	ldq	$1,	8($17)
-	ldq	$2,	16($17)
-	ldq	$3,	24($17)
-	bis	$31,	$31,	$6
-	mulq	$0,	$0,	$4
-	umulh	$0,	$0,	$5
-	stq	$4,	0($16)
-	bis	$31,	$31,	$4
-	mulq	$0,	$1,	$7
-	umulh	$0,	$1,	$8
-	cmplt	$7,	$31,	$22
-	cmplt	$8,	$31,	$23
-	addq	$7,	$7,	$7
-	addq	$8,	$8,	$8
-	addq	$8,	$22,	$8
-	addq	$4,	$23,	$4
-	addq	$5,	$7,	$5
-	addq	$6,	$8,	$6
-	cmpult	$5,	$7,	$24
-	cmpult	$6,	$8,	$25
-	addq	$6,	$24,	$6
-	addq	$4,	$25,	$4
-	stq	$5,	8($16)
-	bis	$31,	$31,	$5
-	mulq	$1,	$1,	$27
-	umulh	$1,	$1,	$28
-	addq	$6,	$27,	$6
-	addq	$4,	$28,	$4
-	cmpult	$6,	$27,	$21
-	cmpult	$4,	$28,	$20
-	addq	$4,	$21,	$4
-	addq	$5,	$20,	$5
-	mulq	$2,	$0,	$19
-	umulh	$2,	$0,	$18
-	cmplt	$19,	$31,	$17
-	cmplt	$18,	$31,	$22
-	addq	$19,	$19,	$19
-	addq	$18,	$18,	$18
-	addq	$18,	$17,	$18
-	addq	$5,	$22,	$5
-	addq	$6,	$19,	$6
-	addq	$4,	$18,	$4
-	cmpult	$6,	$19,	$23
-	cmpult	$4,	$18,	$7
-	addq	$4,	$23,	$4
-	addq	$5,	$7,	$5
-	stq	$6,	16($16)
-	bis	$31,	$31,	$6
-	mulq	$3,	$0,	$8
-	umulh	$3,	$0,	$24
-	cmplt	$8,	$31,	$25
-	cmplt	$24,	$31,	$27
-	addq	$8,	$8,	$8
-	addq	$24,	$24,	$24
-	addq	$24,	$25,	$24
-	addq	$6,	$27,	$6
-	addq	$4,	$8,	$4
-	addq	$5,	$24,	$5
-	cmpult	$4,	$8,	$28
-	cmpult	$5,	$24,	$21
-	addq	$5,	$28,	$5
-	addq	$6,	$21,	$6
-	mulq	$2,	$1,	$20
-	umulh	$2,	$1,	$17
-	cmplt	$20,	$31,	$22
-	cmplt	$17,	$31,	$19
-	addq	$20,	$20,	$20
-	addq	$17,	$17,	$17
-	addq	$17,	$22,	$17
-	addq	$6,	$19,	$6
-	addq	$4,	$20,	$4
-	addq	$5,	$17,	$5
-	cmpult	$4,	$20,	$18
-	cmpult	$5,	$17,	$23
-	addq	$5,	$18,	$5
-	addq	$6,	$23,	$6
-	stq	$4,	24($16)
-	bis	$31,	$31,	$4
-	mulq	$2,	$2,	$7
-	umulh	$2,	$2,	$25
-	addq	$5,	$7,	$5
-	addq	$6,	$25,	$6
-	cmpult	$5,	$7,	$27
-	cmpult	$6,	$25,	$8
-	addq	$6,	$27,	$6
-	addq	$4,	$8,	$4
-	mulq	$3,	$1,	$24
-	umulh	$3,	$1,	$28
-	cmplt	$24,	$31,	$21
-	cmplt	$28,	$31,	$22
-	addq	$24,	$24,	$24
-	addq	$28,	$28,	$28
-	addq	$28,	$21,	$28
-	addq	$4,	$22,	$4
-	addq	$5,	$24,	$5
-	addq	$6,	$28,	$6
-	cmpult	$5,	$24,	$19
-	cmpult	$6,	$28,	$20
-	addq	$6,	$19,	$6
-	addq	$4,	$20,	$4
-	stq	$5,	32($16)
-	bis	$31,	$31,	$5
-	mulq	$3,	$2,	$17
-	umulh	$3,	$2,	$18
-	cmplt	$17,	$31,	$23
-	cmplt	$18,	$31,	$7
-	addq	$17,	$17,	$17
-	addq	$18,	$18,	$18
-	addq	$18,	$23,	$18
-	addq	$5,	$7,	$5
-	addq	$6,	$17,	$6
-	addq	$4,	$18,	$4
-	cmpult	$6,	$17,	$25
-	cmpult	$4,	$18,	$27
-	addq	$4,	$25,	$4
-	addq	$5,	$27,	$5
-	stq	$6,	40($16)
-	bis	$31,	$31,	$6
-	mulq	$3,	$3,	$8
-	umulh	$3,	$3,	$21
-	addq	$4,	$8,	$4
-	addq	$5,	$21,	$5
-	cmpult	$4,	$8,	$22
-	cmpult	$5,	$21,	$24
-	addq	$5,	$22,	$5
-	addq	$6,	$24,	$6
-	stq	$4,	48($16)
-	stq	$5,	56($16)
-	ret	$31,($26),1
-	.end bn_sqr_comba4
-	.text
-	.align 3
-	.globl bn_sqr_comba8
-	.ent bn_sqr_comba8
-bn_sqr_comba8:
-bn_sqr_comba8..ng:
-	.frame $30,0,$26,0
-	.prologue 0
-
-	ldq	$0,	0($17)
-	ldq	$1,	8($17)
-	ldq	$2,	16($17)
-	ldq	$3,	24($17)
-	ldq	$4,	32($17)
-	ldq	$5,	40($17)
-	ldq	$6,	48($17)
-	ldq	$7,	56($17)
-	bis	$31,	$31,	$23
-	mulq	$0,	$0,	$8
-	umulh	$0,	$0,	$22
-	stq	$8,	0($16)
-	bis	$31,	$31,	$8
-	mulq	$1,	$0,	$24
-	umulh	$1,	$0,	$25
-	cmplt	$24,	$31,	$27
-	cmplt	$25,	$31,	$28
-	addq	$24,	$24,	$24
-	addq	$25,	$25,	$25
-	addq	$25,	$27,	$25
-	addq	$8,	$28,	$8
-	addq	$22,	$24,	$22
-	addq	$23,	$25,	$23
-	cmpult	$22,	$24,	$21
-	cmpult	$23,	$25,	$20
-	addq	$23,	$21,	$23
-	addq	$8,	$20,	$8
-	stq	$22,	8($16)
-	bis	$31,	$31,	$22
-	mulq	$1,	$1,	$19
-	umulh	$1,	$1,	$18
-	addq	$23,	$19,	$23
-	addq	$8,	$18,	$8
-	cmpult	$23,	$19,	$17
-	cmpult	$8,	$18,	$27
-	addq	$8,	$17,	$8
-	addq	$22,	$27,	$22
-	mulq	$2,	$0,	$28
-	umulh	$2,	$0,	$24
-	cmplt	$28,	$31,	$25
-	cmplt	$24,	$31,	$21
-	addq	$28,	$28,	$28
-	addq	$24,	$24,	$24
-	addq	$24,	$25,	$24
-	addq	$22,	$21,	$22
-	addq	$23,	$28,	$23
-	addq	$8,	$24,	$8
-	cmpult	$23,	$28,	$20
-	cmpult	$8,	$24,	$19
-	addq	$8,	$20,	$8
-	addq	$22,	$19,	$22
-	stq	$23,	16($16)
-	bis	$31,	$31,	$23
-	mulq	$2,	$1,	$18
-	umulh	$2,	$1,	$17
-	cmplt	$18,	$31,	$27
-	cmplt	$17,	$31,	$25
-	addq	$18,	$18,	$18
-	addq	$17,	$17,	$17
-	addq	$17,	$27,	$17
-	addq	$23,	$25,	$23
-	addq	$8,	$18,	$8
-	addq	$22,	$17,	$22
-	cmpult	$8,	$18,	$21
-	cmpult	$22,	$17,	$28
-	addq	$22,	$21,	$22
-	addq	$23,	$28,	$23
-	mulq	$3,	$0,	$24
-	umulh	$3,	$0,	$20
-	cmplt	$24,	$31,	$19
-	cmplt	$20,	$31,	$27
-	addq	$24,	$24,	$24
-	addq	$20,	$20,	$20
-	addq	$20,	$19,	$20
-	addq	$23,	$27,	$23
-	addq	$8,	$24,	$8
-	addq	$22,	$20,	$22
-	cmpult	$8,	$24,	$25
-	cmpult	$22,	$20,	$18
-	addq	$22,	$25,	$22
-	addq	$23,	$18,	$23
-	stq	$8,	24($16)
-	bis	$31,	$31,	$8
-	mulq	$2,	$2,	$17
-	umulh	$2,	$2,	$21
-	addq	$22,	$17,	$22
-	addq	$23,	$21,	$23
-	cmpult	$22,	$17,	$28
-	cmpult	$23,	$21,	$19
-	addq	$23,	$28,	$23
-	addq	$8,	$19,	$8
-	mulq	$3,	$1,	$27
-	umulh	$3,	$1,	$24
-	cmplt	$27,	$31,	$20
-	cmplt	$24,	$31,	$25
-	addq	$27,	$27,	$27
-	addq	$24,	$24,	$24
-	addq	$24,	$20,	$24
-	addq	$8,	$25,	$8
-	addq	$22,	$27,	$22
-	addq	$23,	$24,	$23
-	cmpult	$22,	$27,	$18
-	cmpult	$23,	$24,	$17
-	addq	$23,	$18,	$23
-	addq	$8,	$17,	$8
-	mulq	$4,	$0,	$21
-	umulh	$4,	$0,	$28
-	cmplt	$21,	$31,	$19
-	cmplt	$28,	$31,	$20
-	addq	$21,	$21,	$21
-	addq	$28,	$28,	$28
-	addq	$28,	$19,	$28
-	addq	$8,	$20,	$8
-	addq	$22,	$21,	$22
-	addq	$23,	$28,	$23
-	cmpult	$22,	$21,	$25
-	cmpult	$23,	$28,	$27
-	addq	$23,	$25,	$23
-	addq	$8,	$27,	$8
-	stq	$22,	32($16)
-	bis	$31,	$31,	$22
-	mulq	$3,	$2,	$24
-	umulh	$3,	$2,	$18
-	cmplt	$24,	$31,	$17
-	cmplt	$18,	$31,	$19
-	addq	$24,	$24,	$24
-	addq	$18,	$18,	$18
-	addq	$18,	$17,	$18
-	addq	$22,	$19,	$22
-	addq	$23,	$24,	$23
-	addq	$8,	$18,	$8
-	cmpult	$23,	$24,	$20
-	cmpult	$8,	$18,	$21
-	addq	$8,	$20,	$8
-	addq	$22,	$21,	$22
-	mulq	$4,	$1,	$28
-	umulh	$4,	$1,	$25
-	cmplt	$28,	$31,	$27
-	cmplt	$25,	$31,	$17
-	addq	$28,	$28,	$28
-	addq	$25,	$25,	$25
-	addq	$25,	$27,	$25
-	addq	$22,	$17,	$22
-	addq	$23,	$28,	$23
-	addq	$8,	$25,	$8
-	cmpult	$23,	$28,	$19
-	cmpult	$8,	$25,	$24
-	addq	$8,	$19,	$8
-	addq	$22,	$24,	$22
-	mulq	$5,	$0,	$18
-	umulh	$5,	$0,	$20
-	cmplt	$18,	$31,	$21
-	cmplt	$20,	$31,	$27
-	addq	$18,	$18,	$18
-	addq	$20,	$20,	$20
-	addq	$20,	$21,	$20
-	addq	$22,	$27,	$22
-	addq	$23,	$18,	$23
-	addq	$8,	$20,	$8
-	cmpult	$23,	$18,	$17
-	cmpult	$8,	$20,	$28
-	addq	$8,	$17,	$8
-	addq	$22,	$28,	$22
-	stq	$23,	40($16)
-	bis	$31,	$31,	$23
-	mulq	$3,	$3,	$25
-	umulh	$3,	$3,	$19
-	addq	$8,	$25,	$8
-	addq	$22,	$19,	$22
-	cmpult	$8,	$25,	$24
-	cmpult	$22,	$19,	$21
-	addq	$22,	$24,	$22
-	addq	$23,	$21,	$23
-	mulq	$4,	$2,	$27
-	umulh	$4,	$2,	$18
-	cmplt	$27,	$31,	$20
-	cmplt	$18,	$31,	$17
-	addq	$27,	$27,	$27
-	addq	$18,	$18,	$18
-	addq	$18,	$20,	$18
-	addq	$23,	$17,	$23
-	addq	$8,	$27,	$8
-	addq	$22,	$18,	$22
-	cmpult	$8,	$27,	$28
-	cmpult	$22,	$18,	$25
-	addq	$22,	$28,	$22
-	addq	$23,	$25,	$23
-	mulq	$5,	$1,	$19
-	umulh	$5,	$1,	$24
-	cmplt	$19,	$31,	$21
-	cmplt	$24,	$31,	$20
-	addq	$19,	$19,	$19
-	addq	$24,	$24,	$24
-	addq	$24,	$21,	$24
-	addq	$23,	$20,	$23
-	addq	$8,	$19,	$8
-	addq	$22,	$24,	$22
-	cmpult	$8,	$19,	$17
-	cmpult	$22,	$24,	$27
-	addq	$22,	$17,	$22
-	addq	$23,	$27,	$23
-	mulq	$6,	$0,	$18
-	umulh	$6,	$0,	$28
-	cmplt	$18,	$31,	$25
-	cmplt	$28,	$31,	$21
-	addq	$18,	$18,	$18
-	addq	$28,	$28,	$28
-	addq	$28,	$25,	$28
-	addq	$23,	$21,	$23
-	addq	$8,	$18,	$8
-	addq	$22,	$28,	$22
-	cmpult	$8,	$18,	$20
-	cmpult	$22,	$28,	$19
-	addq	$22,	$20,	$22
-	addq	$23,	$19,	$23
-	stq	$8,	48($16)
-	bis	$31,	$31,	$8
-	mulq	$4,	$3,	$24
-	umulh	$4,	$3,	$17
-	cmplt	$24,	$31,	$27
-	cmplt	$17,	$31,	$25
-	addq	$24,	$24,	$24
-	addq	$17,	$17,	$17
-	addq	$17,	$27,	$17
-	addq	$8,	$25,	$8
-	addq	$22,	$24,	$22
-	addq	$23,	$17,	$23
-	cmpult	$22,	$24,	$21
-	cmpult	$23,	$17,	$18
-	addq	$23,	$21,	$23
-	addq	$8,	$18,	$8
-	mulq	$5,	$2,	$28
-	umulh	$5,	$2,	$20
-	cmplt	$28,	$31,	$19
-	cmplt	$20,	$31,	$27
-	addq	$28,	$28,	$28
-	addq	$20,	$20,	$20
-	addq	$20,	$19,	$20
-	addq	$8,	$27,	$8
-	addq	$22,	$28,	$22
-	addq	$23,	$20,	$23
-	cmpult	$22,	$28,	$25
-	cmpult	$23,	$20,	$24
-	addq	$23,	$25,	$23
-	addq	$8,	$24,	$8
-	mulq	$6,	$1,	$17
-	umulh	$6,	$1,	$21
-	cmplt	$17,	$31,	$18
-	cmplt	$21,	$31,	$19
-	addq	$17,	$17,	$17
-	addq	$21,	$21,	$21
-	addq	$21,	$18,	$21
-	addq	$8,	$19,	$8
-	addq	$22,	$17,	$22
-	addq	$23,	$21,	$23
-	cmpult	$22,	$17,	$27
-	cmpult	$23,	$21,	$28
-	addq	$23,	$27,	$23
-	addq	$8,	$28,	$8
-	mulq	$7,	$0,	$20
-	umulh	$7,	$0,	$25
-	cmplt	$20,	$31,	$24
-	cmplt	$25,	$31,	$18
-	addq	$20,	$20,	$20
-	addq	$25,	$25,	$25
-	addq	$25,	$24,	$25
-	addq	$8,	$18,	$8
-	addq	$22,	$20,	$22
-	addq	$23,	$25,	$23
-	cmpult	$22,	$20,	$19
-	cmpult	$23,	$25,	$17
-	addq	$23,	$19,	$23
-	addq	$8,	$17,	$8
-	stq	$22,	56($16)
-	bis	$31,	$31,	$22
-	mulq	$4,	$4,	$21
-	umulh	$4,	$4,	$27
-	addq	$23,	$21,	$23
-	addq	$8,	$27,	$8
-	cmpult	$23,	$21,	$28
-	cmpult	$8,	$27,	$24
-	addq	$8,	$28,	$8
-	addq	$22,	$24,	$22
-	mulq	$5,	$3,	$18
-	umulh	$5,	$3,	$20
-	cmplt	$18,	$31,	$25
-	cmplt	$20,	$31,	$19
-	addq	$18,	$18,	$18
-	addq	$20,	$20,	$20
-	addq	$20,	$25,	$20
-	addq	$22,	$19,	$22
-	addq	$23,	$18,	$23
-	addq	$8,	$20,	$8
-	cmpult	$23,	$18,	$17
-	cmpult	$8,	$20,	$21
-	addq	$8,	$17,	$8
-	addq	$22,	$21,	$22
-	mulq	$6,	$2,	$27
-	umulh	$6,	$2,	$28
-	cmplt	$27,	$31,	$24
-	cmplt	$28,	$31,	$25
-	addq	$27,	$27,	$27
-	addq	$28,	$28,	$28
-	addq	$28,	$24,	$28
-	addq	$22,	$25,	$22
-	addq	$23,	$27,	$23
-	addq	$8,	$28,	$8
-	cmpult	$23,	$27,	$19
-	cmpult	$8,	$28,	$18
-	addq	$8,	$19,	$8
-	addq	$22,	$18,	$22
-	mulq	$7,	$1,	$20
-	umulh	$7,	$1,	$17
-	cmplt	$20,	$31,	$21
-	cmplt	$17,	$31,	$24
-	addq	$20,	$20,	$20
-	addq	$17,	$17,	$17
-	addq	$17,	$21,	$17
-	addq	$22,	$24,	$22
-	addq	$23,	$20,	$23
-	addq	$8,	$17,	$8
-	cmpult	$23,	$20,	$25
-	cmpult	$8,	$17,	$27
-	addq	$8,	$25,	$8
-	addq	$22,	$27,	$22
-	stq	$23,	64($16)
-	bis	$31,	$31,	$23
-	mulq	$5,	$4,	$28
-	umulh	$5,	$4,	$19
-	cmplt	$28,	$31,	$18
-	cmplt	$19,	$31,	$21
-	addq	$28,	$28,	$28
-	addq	$19,	$19,	$19
-	addq	$19,	$18,	$19
-	addq	$23,	$21,	$23
-	addq	$8,	$28,	$8
-	addq	$22,	$19,	$22
-	cmpult	$8,	$28,	$24
-	cmpult	$22,	$19,	$20
-	addq	$22,	$24,	$22
-	addq	$23,	$20,	$23
-	mulq	$6,	$3,	$17
-	umulh	$6,	$3,	$25
-	cmplt	$17,	$31,	$27
-	cmplt	$25,	$31,	$18
-	addq	$17,	$17,	$17
-	addq	$25,	$25,	$25
-	addq	$25,	$27,	$25
-	addq	$23,	$18,	$23
-	addq	$8,	$17,	$8
-	addq	$22,	$25,	$22
-	cmpult	$8,	$17,	$21
-	cmpult	$22,	$25,	$28
-	addq	$22,	$21,	$22
-	addq	$23,	$28,	$23
-	mulq	$7,	$2,	$19
-	umulh	$7,	$2,	$24
-	cmplt	$19,	$31,	$20
-	cmplt	$24,	$31,	$27
-	addq	$19,	$19,	$19
-	addq	$24,	$24,	$24
-	addq	$24,	$20,	$24
-	addq	$23,	$27,	$23
-	addq	$8,	$19,	$8
-	addq	$22,	$24,	$22
-	cmpult	$8,	$19,	$18
-	cmpult	$22,	$24,	$17
-	addq	$22,	$18,	$22
-	addq	$23,	$17,	$23
-	stq	$8,	72($16)
-	bis	$31,	$31,	$8
-	mulq	$5,	$5,	$25
-	umulh	$5,	$5,	$21
-	addq	$22,	$25,	$22
-	addq	$23,	$21,	$23
-	cmpult	$22,	$25,	$28
-	cmpult	$23,	$21,	$20
-	addq	$23,	$28,	$23
-	addq	$8,	$20,	$8
-	mulq	$6,	$4,	$27
-	umulh	$6,	$4,	$19
-	cmplt	$27,	$31,	$24
-	cmplt	$19,	$31,	$18
-	addq	$27,	$27,	$27
-	addq	$19,	$19,	$19
-	addq	$19,	$24,	$19
-	addq	$8,	$18,	$8
-	addq	$22,	$27,	$22
-	addq	$23,	$19,	$23
-	cmpult	$22,	$27,	$17
-	cmpult	$23,	$19,	$25
-	addq	$23,	$17,	$23
-	addq	$8,	$25,	$8
-	mulq	$7,	$3,	$21
-	umulh	$7,	$3,	$28
-	cmplt	$21,	$31,	$20
-	cmplt	$28,	$31,	$24
-	addq	$21,	$21,	$21
-	addq	$28,	$28,	$28
-	addq	$28,	$20,	$28
-	addq	$8,	$24,	$8
-	addq	$22,	$21,	$22
-	addq	$23,	$28,	$23
-	cmpult	$22,	$21,	$18
-	cmpult	$23,	$28,	$27
-	addq	$23,	$18,	$23
-	addq	$8,	$27,	$8
-	stq	$22,	80($16)
-	bis	$31,	$31,	$22
-	mulq	$6,	$5,	$19
-	umulh	$6,	$5,	$17
-	cmplt	$19,	$31,	$25
-	cmplt	$17,	$31,	$20
-	addq	$19,	$19,	$19
-	addq	$17,	$17,	$17
-	addq	$17,	$25,	$17
-	addq	$22,	$20,	$22
-	addq	$23,	$19,	$23
-	addq	$8,	$17,	$8
-	cmpult	$23,	$19,	$24
-	cmpult	$8,	$17,	$21
-	addq	$8,	$24,	$8
-	addq	$22,	$21,	$22
-	mulq	$7,	$4,	$28
-	umulh	$7,	$4,	$18
-	cmplt	$28,	$31,	$27
-	cmplt	$18,	$31,	$25
-	addq	$28,	$28,	$28
-	addq	$18,	$18,	$18
-	addq	$18,	$27,	$18
-	addq	$22,	$25,	$22
-	addq	$23,	$28,	$23
-	addq	$8,	$18,	$8
-	cmpult	$23,	$28,	$20
-	cmpult	$8,	$18,	$19
-	addq	$8,	$20,	$8
-	addq	$22,	$19,	$22
-	stq	$23,	88($16)
-	bis	$31,	$31,	$23
-	mulq	$6,	$6,	$17
-	umulh	$6,	$6,	$24
-	addq	$8,	$17,	$8
-	addq	$22,	$24,	$22
-	cmpult	$8,	$17,	$21
-	cmpult	$22,	$24,	$27
-	addq	$22,	$21,	$22
-	addq	$23,	$27,	$23
-	mulq	$7,	$5,	$25
-	umulh	$7,	$5,	$28
-	cmplt	$25,	$31,	$18
-	cmplt	$28,	$31,	$20
-	addq	$25,	$25,	$25
-	addq	$28,	$28,	$28
-	addq	$28,	$18,	$28
-	addq	$23,	$20,	$23
-	addq	$8,	$25,	$8
-	addq	$22,	$28,	$22
-	cmpult	$8,	$25,	$19
-	cmpult	$22,	$28,	$17
-	addq	$22,	$19,	$22
-	addq	$23,	$17,	$23
-	stq	$8,	96($16)
-	bis	$31,	$31,	$8
-	mulq	$7,	$6,	$24
-	umulh	$7,	$6,	$21
-	cmplt	$24,	$31,	$27
-	cmplt	$21,	$31,	$18
-	addq	$24,	$24,	$24
-	addq	$21,	$21,	$21
-	addq	$21,	$27,	$21
-	addq	$8,	$18,	$8
-	addq	$22,	$24,	$22
-	addq	$23,	$21,	$23
-	cmpult	$22,	$24,	$20
-	cmpult	$23,	$21,	$25
-	addq	$23,	$20,	$23
-	addq	$8,	$25,	$8
-	stq	$22,	104($16)
-	bis	$31,	$31,	$22
-	mulq	$7,	$7,	$28
-	umulh	$7,	$7,	$19
-	addq	$23,	$28,	$23
-	addq	$8,	$19,	$8
-	cmpult	$23,	$28,	$17
-	cmpult	$8,	$19,	$27
-	addq	$8,	$17,	$8
-	addq	$22,	$27,	$22
-	stq	$23,	112($16)
-	stq	$8,	120($16)
-	ret	$31,($26),1
-	.end bn_sqr_comba8
diff --git a/crypto/openssl/crypto/bn/asm/alpha.s.works b/crypto/openssl/crypto/bn/asm/alpha.s.works
deleted file mode 100644
index ee6c58780998..000000000000
--- a/crypto/openssl/crypto/bn/asm/alpha.s.works
+++ /dev/null
@@ -1,533 +0,0 @@
-
- # DEC Alpha assember
- # The bn_div64 is actually gcc output but the other parts are hand done.
- # Thanks to tzeruch@ceddec.com for sending me the gcc output for
- # bn_div64.
- # I've gone back and re-done most of routines.
- # The key thing to remeber for the 164 CPU is that while a
- # multiply operation takes 8 cycles, another one can only be issued
- # after 4 cycles have elapsed.  I've done modification to help
- # improve this.  Also, normally, a ld instruction will not be available
- # for about 3 cycles.
-	.file	1 "bn_asm.c"
-	.set noat
-gcc2_compiled.:
-__gnu_compiled_c:
-	.text
-	.align 3
-	.globl bn_mul_add_words
-	.ent bn_mul_add_words
-bn_mul_add_words:
-bn_mul_add_words..ng:
-	.frame $30,0,$26,0
-	.prologue 0
-	.align 5
-	subq	$18,4,$18
-	bis	$31,$31,$0
-	blt	$18,$43		# if we are -1, -2, -3 or -4 goto tail code
-	ldq	$20,0($17)	# 1 1
-	ldq	$1,0($16)	# 1 1
-	.align 3
-$42:
-	mulq	$20,$19,$5	# 1 2 1	######
-	ldq	$21,8($17)	# 2 1
-	ldq	$2,8($16)	# 2 1
-	umulh	$20,$19,$20	# 1 2	######
-	ldq	$27,16($17)	# 3 1
-	ldq	$3,16($16)	# 3 1
-	mulq	$21,$19,$6	# 2 2 1	######
-	 ldq	$28,24($17)	# 4 1
-	addq	$1,$5,$1	# 1 2 2
-	 ldq	$4,24($16)	# 4 1
-	umulh	$21,$19,$21	# 2 2	######
-	 cmpult	$1,$5,$22	# 1 2 3 1
-	addq	$20,$22,$20	# 1 3 1
-	 addq	$1,$0,$1	# 1 2 3 1
-	mulq	$27,$19,$7	# 3 2 1	######
-	 cmpult	$1,$0,$0	# 1 2 3 2
-	addq	$2,$6,$2	# 2 2 2
-	 addq	$20,$0,$0	# 1 3 2 
-	cmpult	$2,$6,$23	# 2 2 3 1
-	 addq	$21,$23,$21	# 2 3 1
-	umulh	$27,$19,$27	# 3 2	######
-	 addq	$2,$0,$2	# 2 2 3 1
-	cmpult	$2,$0,$0	# 2 2 3 2
-	 subq	$18,4,$18
-	mulq	$28,$19,$8	# 4 2 1	######
-	 addq	$21,$0,$0	# 2 3 2 
-	addq	$3,$7,$3	# 3 2 2
-	 addq	$16,32,$16
-	cmpult	$3,$7,$24	# 3 2 3 1
-	 stq	$1,-32($16)	# 1 2 4
-	umulh	$28,$19,$28	# 4 2	######
-	 addq	$27,$24,$27	# 3 3 1
-	addq	$3,$0,$3	# 3 2 3 1
-	 stq	$2,-24($16)	# 2 2 4
-	cmpult	$3,$0,$0	# 3 2 3 2
-	 stq	$3,-16($16)	# 3 2 4
-	addq	$4,$8,$4	# 4 2 2
-	 addq	$27,$0,$0	# 3 3 2 
-	cmpult	$4,$8,$25	# 4 2 3 1
-	 addq	$17,32,$17
-	addq	$28,$25,$28	# 4 3 1
-	 addq	$4,$0,$4	# 4 2 3 1
-	cmpult	$4,$0,$0	# 4 2 3 2
-	 stq	$4,-8($16)	# 4 2 4
-	addq	$28,$0,$0	# 4 3 2 
-	 blt	$18,$43
-
-	ldq	$20,0($17)	# 1 1
-	ldq	$1,0($16)	# 1 1
-
-	br	$42
-
-	.align 4
-$45:
-	ldq	$20,0($17)	# 4 1
-	ldq	$1,0($16)	# 4 1
-	mulq	$20,$19,$5	# 4 2 1
-	subq	$18,1,$18
-	addq	$16,8,$16
-	addq	$17,8,$17
-	umulh	$20,$19,$20	# 4 2
-	addq	$1,$5,$1	# 4 2 2
-	cmpult	$1,$5,$22	# 4 2 3 1
-	addq	$20,$22,$20	# 4 3 1
-	addq	$1,$0,$1	# 4 2 3 1
-	cmpult	$1,$0,$0	# 4 2 3 2
-	addq	$20,$0,$0	# 4 3 2 
-	stq	$1,-8($16)	# 4 2 4
-	bgt	$18,$45
-	ret	$31,($26),1	# else exit
-
-	.align 4
-$43:
-	addq	$18,4,$18
-	bgt	$18,$45		# goto tail code
-	ret	$31,($26),1	# else exit
-
-	.end bn_mul_add_words
-	.align 3
-	.globl bn_mul_words
-	.ent bn_mul_words
-bn_mul_words:
-bn_mul_words..ng:
-	.frame $30,0,$26,0
-	.prologue 0
-	.align 5
-	subq	$18,4,$18
-	bis	$31,$31,$0
-	blt	$18,$143	# if we are -1, -2, -3 or -4 goto tail code
-	ldq	$20,0($17)	# 1 1
-	.align 3
-$142:
-
-	mulq	$20,$19,$5	# 1 2 1	#####
-	 ldq	$21,8($17)	# 2 1
-	 ldq	$27,16($17)	# 3 1
-	umulh	$20,$19,$20	# 1 2	#####
-	 ldq	$28,24($17)	# 4 1
-	mulq	$21,$19,$6	# 2 2 1	#####
-	 addq	$5,$0,$5	# 1 2 3 1
-	subq	$18,4,$18
-	 cmpult	$5,$0,$0	# 1 2 3 2
-	umulh	$21,$19,$21	# 2 2	#####
-	 addq	$20,$0,$0	# 1 3 2 
-	addq	$17,32,$17
-	 addq	$6,$0,$6	# 2 2 3 1
-	mulq	$27,$19,$7	# 3 2 1	#####
-	 cmpult	$6,$0,$0	# 2 2 3 2
-	addq	$21,$0,$0	# 2 3 2 
-	 addq	$16,32,$16
-	umulh	$27,$19,$27	# 3 2	#####
-	 stq	$5,-32($16)	# 1 2 4
-	mulq	$28,$19,$8	# 4 2 1	#####
-	 addq	$7,$0,$7	# 3 2 3 1
-	stq	$6,-24($16)	# 2 2 4
-	 cmpult	$7,$0,$0	# 3 2 3 2
-	umulh	$28,$19,$28	# 4 2	#####
-	 addq	$27,$0,$0	# 3 3 2 
-	stq	$7,-16($16)	# 3 2 4
-	 addq	$8,$0,$8	# 4 2 3 1
-	cmpult	$8,$0,$0	# 4 2 3 2
-
-	addq	$28,$0,$0	# 4 3 2 
-
-	stq	$8,-8($16)	# 4 2 4
-
-	blt	$18,$143
-
-	ldq	$20,0($17)	# 1 1
-
-	br	$142
-
-	.align 4
-$145:
-	ldq	$20,0($17)	# 4 1
-	mulq	$20,$19,$5	# 4 2 1
-	subq	$18,1,$18
-	umulh	$20,$19,$20	# 4 2
-	addq	$5,$0,$5	# 4 2 3 1
-	 addq	$16,8,$16
-	cmpult	$5,$0,$0	# 4 2 3 2
-	 addq	$17,8,$17
-	addq	$20,$0,$0	# 4 3 2 
-	stq	$5,-8($16)	# 4 2 4
-
-	bgt	$18,$145
-	ret	$31,($26),1	# else exit
-
-	.align 4
-$143:
-	addq	$18,4,$18
-	bgt	$18,$145	# goto tail code
-	ret	$31,($26),1	# else exit
-
-	.end bn_mul_words
-	.align 3
-	.globl bn_sqr_words
-	.ent bn_sqr_words
-bn_sqr_words:
-bn_sqr_words..ng:
-	.frame $30,0,$26,0
-	.prologue 0
-
-	subq	$18,4,$18
-	blt	$18,$543	# if we are -1, -2, -3 or -4 goto tail code
-	ldq	$20,0($17)	# 1 1
-	.align 3
-$542:
-	mulq	$20,$20,$5		######
-	 ldq	$21,8($17)	# 1 1
-	subq	$18,4
- 	umulh	$20,$20,$1		######
-	ldq	$27,16($17)	# 1 1
-	mulq	$21,$21,$6		######
-	ldq	$28,24($17)	# 1 1
-	stq	$5,0($16)	# r[0]
- 	umulh	$21,$21,$2		######
-	stq	$1,8($16)	# r[1]
-	mulq	$27,$27,$7		######
-	stq	$6,16($16)	# r[0]
- 	umulh	$27,$27,$3		######
-	stq	$2,24($16)	# r[1]
-	mulq	$28,$28,$8		######
-	stq	$7,32($16)	# r[0]
- 	umulh	$28,$28,$4		######
-	stq	$3,40($16)	# r[1]
-
- 	addq	$16,64,$16
- 	addq	$17,32,$17
-	stq	$8,-16($16)	# r[0]
-	stq	$4,-8($16)	# r[1]
-
-	blt	$18,$543
-	ldq	$20,0($17)	# 1 1
- 	br 	$542
-
-$442:
-	ldq	$20,0($17)   # a[0]
-	mulq	$20,$20,$5  # a[0]*w low part       r2
-	addq	$16,16,$16
-	addq	$17,8,$17
-	subq	$18,1,$18
-        umulh	$20,$20,$1  # a[0]*w high part       r3
-	stq	$5,-16($16)   # r[0]
-        stq	$1,-8($16)   # r[1]
-
-	bgt	$18,$442
-	ret	$31,($26),1	# else exit
-
-	.align 4
-$543:
-	addq	$18,4,$18
-	bgt	$18,$442	# goto tail code
-	ret	$31,($26),1	# else exit
-	.end bn_sqr_words
-
-	.align 3
-	.globl bn_add_words
-	.ent bn_add_words
-bn_add_words:
-bn_add_words..ng:
-	.frame $30,0,$26,0
-	.prologue 0
-
-	subq	$19,4,$19
-	bis	$31,$31,$0	# carry = 0
-	blt	$19,$900
-	ldq	$5,0($17)	# a[0]
-	ldq	$1,0($18)	# b[1]
-	.align 3
-$901:
-	addq	$1,$5,$1	# r=a+b;
-	 ldq	$6,8($17)	# a[1]
-	cmpult	$1,$5,$22	# did we overflow?
-	 ldq	$2,8($18)	# b[1]
-	addq	$1,$0,$1	# c+= overflow
-	 ldq	$7,16($17)	# a[2]
-	cmpult	$1,$0,$0	# overflow?
-	 ldq	$3,16($18)	# b[2]
-	addq	$0,$22,$0
-	 ldq	$8,24($17)	# a[3]
-	addq	$2,$6,$2	# r=a+b;
-	 ldq	$4,24($18)	# b[3]
-	cmpult	$2,$6,$23	# did we overflow?
-	 addq	$3,$7,$3	# r=a+b;
-	addq	$2,$0,$2	# c+= overflow
-	 cmpult	$3,$7,$24	# did we overflow?
-	cmpult	$2,$0,$0	# overflow?
-	 addq	$4,$8,$4	# r=a+b;
-	addq	$0,$23,$0
-	 cmpult	$4,$8,$25	# did we overflow?
-	addq	$3,$0,$3	# c+= overflow
-	 stq	$1,0($16)	# r[0]=c
-	cmpult	$3,$0,$0	# overflow?
-	 stq	$2,8($16)	# r[1]=c
-	addq	$0,$24,$0
-	 stq	$3,16($16)	# r[2]=c
-	addq	$4,$0,$4	# c+= overflow
-	 subq	$19,4,$19	# loop--
-	cmpult	$4,$0,$0	# overflow?
-	 addq	$17,32,$17	# a++
-	addq	$0,$25,$0
-	 stq	$4,24($16)	# r[3]=c
-	addq	$18,32,$18	# b++
-	 addq	$16,32,$16	# r++
-
-	blt	$19,$900
-	 ldq	$5,0($17)	# a[0]
-	ldq	$1,0($18)	# b[1]
-	 br	$901
-	.align 4
-$945:
-	ldq	$5,0($17)	# a[0]
-	 ldq	$1,0($18)	# b[1]
-	addq	$1,$5,$1	# r=a+b;
-	 subq	$19,1,$19	# loop--
-	addq	$1,$0,$1	# c+= overflow
-	 addq	$17,8,$17	# a++
-	cmpult	$1,$5,$22	# did we overflow?
-	 cmpult	$1,$0,$0	# overflow?
-	addq	$18,8,$18	# b++
-	 stq	$1,0($16)	# r[0]=c
-	addq	$0,$22,$0
-	 addq	$16,8,$16	# r++
-
-	bgt	$19,$945
-	ret	$31,($26),1	# else exit
-
-$900:
-	addq	$19,4,$19
-	bgt	$19,$945	# goto tail code
-	ret	$31,($26),1	# else exit
-	.end bn_add_words
-
- #
- # What follows was taken directly from the C compiler with a few
- # hacks to redo the lables.
- #
-.text
-	.align 3
-	.globl bn_div64
-	.ent bn_div64
-bn_div64:
-	ldgp $29,0($27)
-bn_div64..ng:
-	lda $30,-48($30)
-	.frame $30,48,$26,0
-	stq $26,0($30)
-	stq $9,8($30)
-	stq $10,16($30)
-	stq $11,24($30)
-	stq $12,32($30)
-	stq $13,40($30)
-	.mask 0x4003e00,-48
-	.prologue 1
-	bis $16,$16,$9
-	bis $17,$17,$10
-	bis $18,$18,$11
-	bis $31,$31,$13
-	bis $31,2,$12
-	bne $11,$119
-	lda $0,-1
-	br $31,$136
-	.align 4
-$119:
-	bis $11,$11,$16
-	jsr $26,BN_num_bits_word
-	ldgp $29,0($26)
-	subq $0,64,$1
-	beq $1,$120
-	bis $31,1,$1
-	sll $1,$0,$1
-	cmpule $9,$1,$1
-	bne $1,$120
- #	lda $16,_IO_stderr_
- #	lda $17,$C32
- #	bis $0,$0,$18
- #	jsr $26,fprintf
- #	ldgp $29,0($26)
-	jsr $26,abort
-	ldgp $29,0($26)
-	.align 4
-$120:
-	bis $31,64,$3
-	cmpult $9,$11,$2
-	subq $3,$0,$1
-	addl $1,$31,$0
-	subq $9,$11,$1
-	cmoveq $2,$1,$9
-	beq $0,$122
-	zapnot $0,15,$2
-	subq $3,$0,$1
-	sll $11,$2,$11
-	sll $9,$2,$3
-	srl $10,$1,$1
-	sll $10,$2,$10
-	bis $3,$1,$9
-$122:
-	srl $11,32,$5
-	zapnot $11,15,$6
-	lda $7,-1
-	.align 5
-$123:
-	srl $9,32,$1
-	subq $1,$5,$1
-	bne $1,$126
-	zapnot $7,15,$27
-	br $31,$127
-	.align 4
-$126:
-	bis $9,$9,$24
-	bis $5,$5,$25
-	divqu $24,$25,$27
-$127:
-	srl $10,32,$4
-	.align 5
-$128:
-	mulq $27,$5,$1
-	subq $9,$1,$3
-	zapnot $3,240,$1
-	bne $1,$129
-	mulq $6,$27,$2
-	sll $3,32,$1
-	addq $1,$4,$1
-	cmpule $2,$1,$2
-	bne $2,$129
-	subq $27,1,$27
-	br $31,$128
-	.align 4
-$129:
-	mulq $27,$6,$1
-	mulq $27,$5,$4
-	srl $1,32,$3
-	sll $1,32,$1
-	addq $4,$3,$4
-	cmpult $10,$1,$2
-	subq $10,$1,$10
-	addq $2,$4,$2
-	cmpult $9,$2,$1
-	bis $2,$2,$4
-	beq $1,$134
-	addq $9,$11,$9
-	subq $27,1,$27
-$134:
-	subl $12,1,$12
-	subq $9,$4,$9
-	beq $12,$124
-	sll $27,32,$13
-	sll $9,32,$2
-	srl $10,32,$1
-	sll $10,32,$10
-	bis $2,$1,$9
-	br $31,$123
-	.align 4
-$124:
-	bis $13,$27,$0
-$136:
-	ldq $26,0($30)
-	ldq $9,8($30)
-	ldq $10,16($30)
-	ldq $11,24($30)
-	ldq $12,32($30)
-	ldq $13,40($30)
-	addq $30,48,$30
-	ret $31,($26),1
-	.end bn_div64
-
-	.set noat
-	.text
-	.align 3
-	.globl bn_sub_words
-	.ent bn_sub_words
-bn_sub_words:
-bn_sub_words..ng:
-	.frame $30,0,$26,0
-	.prologue 0
-
-	subq	$19,	4,	$19
-	bis	$31,	$31,	$0
-	blt	$19,	$100
-	ldq	$1,	0($17)
-	ldq	$2,	0($18)
-$101:
-	ldq	$3,	8($17)
-	cmpult	$1,	$2,	$4
-	ldq	$5,	8($18)
-	subq	$1,	$2,	$1
-	ldq	$6,	16($17)
-	cmpult	$1,	$0,	$2
-	ldq	$7,	16($18)
-	subq	$1,	$0,	$23
-	ldq	$8,	24($17)
-	addq	$2,	$4,	$0
-	cmpult	$3,	$5,	$24
-	subq	$3,	$5,	$3
-	ldq	$22,	24($18)
-	cmpult	$3,	$0,	$5
-	subq	$3,	$0,	$25
-	addq	$5,	$24,	$0
-	cmpult	$6,	$7,	$27
-	subq	$6,	$7,	$6
-	stq	$23,	0($16)
-	cmpult	$6,	$0,	$7
-	subq	$6,	$0,	$28
-	addq	$7,	$27,	$0
-	cmpult	$8,	$22,	$21
-	subq	$8,	$22,	$8
-	stq	$25,	8($16)
-	cmpult	$8,	$0,	$22
-	subq	$8,	$0,	$20
-	addq	$22,	$21,	$0
-	stq	$28,	16($16)
-	subq	$19,	4,	$19
-	stq	$20,	24($16)
-	addq	$17,	32,	$17
-	addq	$18,	32,	$18
-	addq	$16,	32,	$16
-	blt	$19,	$100
-	ldq	$1,	0($17)
-	ldq	$2,	0($18)
-	br	$101
-$102:
-	ldq	$1,	0($17)
-	ldq	$2,	0($18)
-	cmpult	$1,	$2,	$27
-	subq	$1,	$2,	$1
-	cmpult	$1,	$0,	$2
-	subq	$1,	$0,	$1
-	stq	$1,	0($16)
-	addq	$2,	$27,	$0
-	addq	$17,	8,	$17
-	addq	$18,	8,	$18
-	addq	$16,	8,	$16
-	subq	$19,	1,	$19
-	bgt	$19,	$102
-	ret	$31,($26),1
-$100:
-	addq	$19,	4,	$19
-	bgt	$19,	$102
-$103:
-	ret	$31,($26),1
-	.end bn_sub_words
diff --git a/crypto/openssl/crypto/bn/asm/alpha.works/add.pl b/crypto/openssl/crypto/bn/asm/alpha.works/add.pl
deleted file mode 100644
index 4dc76e6b69f7..000000000000
--- a/crypto/openssl/crypto/bn/asm/alpha.works/add.pl
+++ /dev/null
@@ -1,119 +0,0 @@
-#!/usr/local/bin/perl
-# alpha assember 
-
-sub bn_add_words
-	{
-	local($name)=@_;
-	local($cc,$a,$b,$r);
-
-	&init_pool(4);
-	($cc)=GR("r0");
-
-	$rp=&wparam(0);
-	$ap=&wparam(1);
-	$bp=&wparam(2);
-	$count=&wparam(3);
-
-	&function_begin($name,"");
-
-	&comment("");
-	&sub($count,4,$count);
-	&mov("zero",$cc);
-	&br(&label("finish"));
-	&blt($count,&label("finish"));
-
-	($a0,$b0)=&NR(2);
-	&ld($a0,&QWPw(0,$ap));
-	&ld($b0,&QWPw(0,$bp));
-
-##########################################################
-	&set_label("loop");
-
-	($a1)=&NR(1); &ld($a1,&QWPw(1,$ap));
-	($b1)=&NR(1); &ld($b1,&QWPw(1,$bp));
-	($a2)=&NR(1); &ld($a2,&QWPw(2,$ap));
-	($b2)=&NR(1); &ld($b2,&QWPw(2,$bp));
-	($a3)=&NR(1); &ld($a3,&QWPw(3,$ap));
-	($b3)=&NR(1); &ld($b3,&QWPw(3,$bp));
-
-	($o0,$t0)=&NR(2);
-	&add($a0,$b0,$o0); 
-	&cmpult($o0,$b0,$t0);
-	&add($o0,$cc,$o0);
-	&cmpult($o0,$cc,$cc);
-	&add($cc,$t0,$cc);	&FR($t0);
-
-	($t1,$o1)=&NR(2);
-
-	&add($a1,$b1,$o1);	&FR($a1);
-	&cmpult($o1,$b1,$t1);	&FR($b1);
-	&add($o1,$cc,$o1);
-	&cmpult($o1,$cc,$cc);
-	&add($cc,$t1,$cc);	&FR($t1);
-
-	($t2,$o2)=&NR(2);
-
-	&add($a2,$b2,$o2);	&FR($a2);
-	&cmpult($o2,$b2,$t2);	&FR($b2);
-	&add($o2,$cc,$o2);
-	&cmpult($o2,$cc,$cc);
-	&add($cc,$t2,$cc);	&FR($t2);
-
-	($t3,$o3)=&NR(2);
-
-	&add($a3,$b3,$o3);	&FR($a3);
-	&cmpult($o3,$b3,$t3);	&FR($b3);
-	&add($o3,$cc,$o3);
-	&cmpult($o3,$cc,$cc);
-	&add($cc,$t3,$cc);	&FR($t3);
-
-	&st($o0,&QWPw(0,$rp)); &FR($o0);
-	&st($o1,&QWPw(0,$rp)); &FR($o1);
-	&st($o2,&QWPw(0,$rp)); &FR($o2);
-	&st($o3,&QWPw(0,$rp)); &FR($o3);
-
-	&sub($count,4,$count);	# count-=4
-	&add($ap,4*$QWS,$ap);	# count+=4
-	&add($bp,4*$QWS,$bp);	# count+=4
-	&add($rp,4*$QWS,$rp);	# count+=4
-
-	&blt($count,&label("finish"));
-	&ld($a0,&QWPw(0,$ap));
-	 &ld($b0,&QWPw(0,$bp));
-	&br(&label("loop"));
-##################################################
-	# Do the last 0..3 words
-
-	($t0,$o0)=&NR(2);
-	&set_label("last_loop");
-
-	&ld($a0,&QWPw(0,$ap));	# get a
-	&ld($b0,&QWPw(0,$bp));	# get b
-
-	&add($a0,$b0,$o0); 
-	&cmpult($o0,$b0,$t0);	# will we borrow?
-	&add($o0,$cc,$o0);	# will we borrow?
-	&cmpult($o0,$cc,$cc);	# will we borrow?
-	&add($cc,$t0,$cc);	# add the borrows
-	&st($o0,&QWPw(0,$rp));	# save
-
-	&add($ap,$QWS,$ap);
-	&add($bp,$QWS,$bp);
-	&add($rp,$QWS,$rp);
-	&sub($count,1,$count);
-	&bgt($count,&label("last_loop"));
-	&function_end_A($name);
-
-######################################################
-	&set_label("finish");
-	&add($count,4,$count);
-	&bgt($count,&label("last_loop"));
-
-	&FR($o0,$t0,$a0,$b0);
-	&set_label("end");
-	&function_end($name);
-
-	&fin_pool;
-	}
-
-1;
diff --git a/crypto/openssl/crypto/bn/asm/alpha.works/div.pl b/crypto/openssl/crypto/bn/asm/alpha.works/div.pl
deleted file mode 100644
index 7ec144377fa6..000000000000
--- a/crypto/openssl/crypto/bn/asm/alpha.works/div.pl
+++ /dev/null
@@ -1,144 +0,0 @@
-#!/usr/local/bin/perl
-
-sub bn_div64
-	{
-	local($data)=<<'EOF';
- #
- # What follows was taken directly from the C compiler with a few
- # hacks to redo the lables.
- #
-.text
-        .set noreorder
-	.set volatile
-	.align 3
-	.globl bn_div64
-	.ent bn_div64
-bn_div64:
-	ldgp $29,0($27)
-bn_div64..ng:
-	lda $30,-48($30)
-	.frame $30,48,$26,0
-	stq $26,0($30)
-	stq $9,8($30)
-	stq $10,16($30)
-	stq $11,24($30)
-	stq $12,32($30)
-	stq $13,40($30)
-	.mask 0x4003e00,-48
-	.prologue 1
-	bis $16,$16,$9
-	bis $17,$17,$10
-	bis $18,$18,$11
-	bis $31,$31,$13
-	bis $31,2,$12
-	bne $11,$9119
-	lda $0,-1
-	br $31,$9136
-	.align 4
-$9119:
-	bis $11,$11,$16
-	jsr $26,BN_num_bits_word
-	ldgp $29,0($26)
-	subq $0,64,$1
-	beq $1,$9120
-	bis $31,1,$1
-	sll $1,$0,$1
-	cmpule $9,$1,$1
-	bne $1,$9120
- #	lda $16,_IO_stderr_
- #	lda $17,$C32
- #	bis $0,$0,$18
- #	jsr $26,fprintf
- #	ldgp $29,0($26)
-	jsr $26,abort
-	ldgp $29,0($26)
-	.align 4
-$9120:
-	bis $31,64,$3
-	cmpult $9,$11,$2
-	subq $3,$0,$1
-	addl $1,$31,$0
-	subq $9,$11,$1
-	cmoveq $2,$1,$9
-	beq $0,$9122
-	zapnot $0,15,$2
-	subq $3,$0,$1
-	sll $11,$2,$11
-	sll $9,$2,$3
-	srl $10,$1,$1
-	sll $10,$2,$10
-	bis $3,$1,$9
-$9122:
-	srl $11,32,$5
-	zapnot $11,15,$6
-	lda $7,-1
-	.align 5
-$9123:
-	srl $9,32,$1
-	subq $1,$5,$1
-	bne $1,$9126
-	zapnot $7,15,$27
-	br $31,$9127
-	.align 4
-$9126:
-	bis $9,$9,$24
-	bis $5,$5,$25
-	divqu $24,$25,$27
-$9127:
-	srl $10,32,$4
-	.align 5
-$9128:
-	mulq $27,$5,$1
-	subq $9,$1,$3
-	zapnot $3,240,$1
-	bne $1,$9129
-	mulq $6,$27,$2
-	sll $3,32,$1
-	addq $1,$4,$1
-	cmpule $2,$1,$2
-	bne $2,$9129
-	subq $27,1,$27
-	br $31,$9128
-	.align 4
-$9129:
-	mulq $27,$6,$1
-	mulq $27,$5,$4
-	srl $1,32,$3
-	sll $1,32,$1
-	addq $4,$3,$4
-	cmpult $10,$1,$2
-	subq $10,$1,$10
-	addq $2,$4,$2
-	cmpult $9,$2,$1
-	bis $2,$2,$4
-	beq $1,$9134
-	addq $9,$11,$9
-	subq $27,1,$27
-$9134:
-	subl $12,1,$12
-	subq $9,$4,$9
-	beq $12,$9124
-	sll $27,32,$13
-	sll $9,32,$2
-	srl $10,32,$1
-	sll $10,32,$10
-	bis $2,$1,$9
-	br $31,$9123
-	.align 4
-$9124:
-	bis $13,$27,$0
-$9136:
-	ldq $26,0($30)
-	ldq $9,8($30)
-	ldq $10,16($30)
-	ldq $11,24($30)
-	ldq $12,32($30)
-	ldq $13,40($30)
-	addq $30,48,$30
-	ret $31,($26),1
-	.end bn_div64
-EOF
-	&asm_add($data);
-	}
-
-1;
diff --git a/crypto/openssl/crypto/bn/asm/alpha.works/mul.pl b/crypto/openssl/crypto/bn/asm/alpha.works/mul.pl
deleted file mode 100644
index b182bae4520b..000000000000
--- a/crypto/openssl/crypto/bn/asm/alpha.works/mul.pl
+++ /dev/null
@@ -1,116 +0,0 @@
-#!/usr/local/bin/perl
-# alpha assember 
-
-sub bn_mul_words
-	{
-	local($name)=@_;
-	local($cc,$a,$b,$r,$couny);
-
-	&init_pool(4);
-	($cc)=GR("r0");
-
-	$rp=&wparam(0);
-	$ap=&wparam(1);
-	$count=&wparam(2);
-	$word=&wparam(3);
-
-	&function_begin($name,"");
-
-	&comment("");
-	&sub($count,4,$count);
-	&mov("zero",$cc);
-	&br(&label("finish"));
-	&blt($count,&label("finish"));
-
-	($a0,$r0)=&NR(2);
-	&ld($a0,&QWPw(0,$ap));
-	&ld($r0,&QWPw(0,$rp));
-
-$a=<<'EOF';
-##########################################################
-	&set_label("loop");
-
-	($a1)=&NR(1); &ld($a1,&QWPw(1,$ap));
-	($b1)=&NR(1); &ld($b1,&QWPw(1,$bp));
-	($a2)=&NR(1); &ld($a2,&QWPw(2,$ap));
-	($b2)=&NR(1); &ld($b2,&QWPw(2,$bp));
-	($a3)=&NR(1); &ld($a3,&QWPw(3,$ap));
-	($b3)=&NR(1); &ld($b3,&QWPw(3,$bp));
-
-	($o0,$t0)=&NR(2);
-	&add($a0,$b0,$o0); 
-	&cmpult($o0,$b0,$t0);
-	&add($o0,$cc,$o0);
-	&cmpult($o0,$cc,$cc);
-	&add($cc,$t0,$cc);	&FR($t0);
-
-	($t1,$o1)=&NR(2);
-
-	&add($a1,$b1,$o1);	&FR($a1);
-	&cmpult($o1,$b1,$t1);	&FR($b1);
-	&add($o1,$cc,$o1);
-	&cmpult($o1,$cc,$cc);
-	&add($cc,$t1,$cc);	&FR($t1);
-
-	($t2,$o2)=&NR(2);
-
-	&add($a2,$b2,$o2);	&FR($a2);
-	&cmpult($o2,$b2,$t2);	&FR($b2);
-	&add($o2,$cc,$o2);
-	&cmpult($o2,$cc,$cc);
-	&add($cc,$t2,$cc);	&FR($t2);
-
-	($t3,$o3)=&NR(2);
-
-	&add($a3,$b3,$o3);	&FR($a3);
-	&cmpult($o3,$b3,$t3);	&FR($b3);
-	&add($o3,$cc,$o3);
-	&cmpult($o3,$cc,$cc);
-	&add($cc,$t3,$cc);	&FR($t3);
-
-	&st($o0,&QWPw(0,$rp)); &FR($o0);
-	&st($o1,&QWPw(0,$rp)); &FR($o1);
-	&st($o2,&QWPw(0,$rp)); &FR($o2);
-	&st($o3,&QWPw(0,$rp)); &FR($o3);
-
-	&sub($count,4,$count);	# count-=4
-	&add($ap,4*$QWS,$ap);	# count+=4
-	&add($bp,4*$QWS,$bp);	# count+=4
-	&add($rp,4*$QWS,$rp);	# count+=4
-
-	&blt($count,&label("finish"));
-	&ld($a0,&QWPw(0,$ap));
-	 &ld($b0,&QWPw(0,$bp));
-	&br(&label("loop"));
-EOF
-##################################################
-	# Do the last 0..3 words
-
-	&set_label("last_loop");
-
-	&ld(($a0)=&NR(1),&QWPw(0,$ap));	# get a
-	&mul($a0,$word,($l0)=&NR(1));
-	 &add($ap,$QWS,$ap);
-	&muh($a0,$word,($h0)=&NR(1));	&FR($a0);
-	&add($l0,$cc,$l0);
-	 &add($rp,$QWS,$rp);
-	 &sub($count,1,$count);
-	&cmpult($l0,$cc,$cc);
-	&st($l0,&QWPw(-1,$rp));		&FR($l0);
-	&add($h0,$cc,$cc);		&FR($h0);
-
-	&bgt($count,&label("last_loop"));
-	&function_end_A($name);
-
-######################################################
-	&set_label("finish");
-	&add($count,4,$count);
-	&bgt($count,&label("last_loop"));
-
-	&set_label("end");
-	&function_end($name);
-
-	&fin_pool;
-	}
-
-1;
diff --git a/crypto/openssl/crypto/bn/asm/alpha.works/mul_add.pl b/crypto/openssl/crypto/bn/asm/alpha.works/mul_add.pl
deleted file mode 100644
index e37f6315fbc8..000000000000
--- a/crypto/openssl/crypto/bn/asm/alpha.works/mul_add.pl
+++ /dev/null
@@ -1,120 +0,0 @@
-#!/usr/local/bin/perl
-# alpha assember 
-
-sub bn_mul_add_words
-	{
-	local($name)=@_;
-	local($cc,$a,$b,$r,$couny);
-
-	&init_pool(4);
-	($cc)=GR("r0");
-
-	$rp=&wparam(0);
-	$ap=&wparam(1);
-	$count=&wparam(2);
-	$word=&wparam(3);
-
-	&function_begin($name,"");
-
-	&comment("");
-	&sub($count,4,$count);
-	&mov("zero",$cc);
-	&br(&label("finish"));
-	&blt($count,&label("finish"));
-
-	($a0,$r0)=&NR(2);
-	&ld($a0,&QWPw(0,$ap));
-	&ld($r0,&QWPw(0,$rp));
-
-$a=<<'EOF';
-##########################################################
-	&set_label("loop");
-
-	($a1)=&NR(1); &ld($a1,&QWPw(1,$ap));
-	($b1)=&NR(1); &ld($b1,&QWPw(1,$bp));
-	($a2)=&NR(1); &ld($a2,&QWPw(2,$ap));
-	($b2)=&NR(1); &ld($b2,&QWPw(2,$bp));
-	($a3)=&NR(1); &ld($a3,&QWPw(3,$ap));
-	($b3)=&NR(1); &ld($b3,&QWPw(3,$bp));
-
-	($o0,$t0)=&NR(2);
-	&add($a0,$b0,$o0); 
-	&cmpult($o0,$b0,$t0);
-	&add($o0,$cc,$o0);
-	&cmpult($o0,$cc,$cc);
-	&add($cc,$t0,$cc);	&FR($t0);
-
-	($t1,$o1)=&NR(2);
-
-	&add($a1,$b1,$o1);	&FR($a1);
-	&cmpult($o1,$b1,$t1);	&FR($b1);
-	&add($o1,$cc,$o1);
-	&cmpult($o1,$cc,$cc);
-	&add($cc,$t1,$cc);	&FR($t1);
-
-	($t2,$o2)=&NR(2);
-
-	&add($a2,$b2,$o2);	&FR($a2);
-	&cmpult($o2,$b2,$t2);	&FR($b2);
-	&add($o2,$cc,$o2);
-	&cmpult($o2,$cc,$cc);
-	&add($cc,$t2,$cc);	&FR($t2);
-
-	($t3,$o3)=&NR(2);
-
-	&add($a3,$b3,$o3);	&FR($a3);
-	&cmpult($o3,$b3,$t3);	&FR($b3);
-	&add($o3,$cc,$o3);
-	&cmpult($o3,$cc,$cc);
-	&add($cc,$t3,$cc);	&FR($t3);
-
-	&st($o0,&QWPw(0,$rp)); &FR($o0);
-	&st($o1,&QWPw(0,$rp)); &FR($o1);
-	&st($o2,&QWPw(0,$rp)); &FR($o2);
-	&st($o3,&QWPw(0,$rp)); &FR($o3);
-
-	&sub($count,4,$count);	# count-=4
-	&add($ap,4*$QWS,$ap);	# count+=4
-	&add($bp,4*$QWS,$bp);	# count+=4
-	&add($rp,4*$QWS,$rp);	# count+=4
-
-	&blt($count,&label("finish"));
-	&ld($a0,&QWPw(0,$ap));
-	 &ld($b0,&QWPw(0,$bp));
-	&br(&label("loop"));
-EOF
-##################################################
-	# Do the last 0..3 words
-
-	&set_label("last_loop");
-
-	&ld(($a0)=&NR(1),&QWPw(0,$ap));	# get a
-	&ld(($r0)=&NR(1),&QWPw(0,$rp));	# get b
-	&mul($a0,$word,($l0)=&NR(1));
-	 &sub($count,1,$count);
-	 &add($ap,$QWS,$ap);
-	&muh($a0,$word,($h0)=&NR(1));	&FR($a0);
-	&add($r0,$l0,$r0);
-	 &add($rp,$QWS,$rp);
-	&cmpult($r0,$l0,($t0)=&NR(1));	&FR($l0);
-	 &add($r0,$cc,$r0);
-	&add($h0,$t0,$h0);		&FR($t0);
-	 &cmpult($r0,$cc,$cc);
-	&st($r0,&QWPw(-1,$rp));		&FR($r0);
-	 &add($h0,$cc,$cc);		&FR($h0);
-
-	&bgt($count,&label("last_loop"));
-	&function_end_A($name);
-
-######################################################
-	&set_label("finish");
-	&add($count,4,$count);
-	&bgt($count,&label("last_loop"));
-
-	&set_label("end");
-	&function_end($name);
-
-	&fin_pool;
-	}
-
-1;
diff --git a/crypto/openssl/crypto/bn/asm/alpha.works/mul_c4.pl b/crypto/openssl/crypto/bn/asm/alpha.works/mul_c4.pl
deleted file mode 100644
index 5efd20128140..000000000000
--- a/crypto/openssl/crypto/bn/asm/alpha.works/mul_c4.pl
+++ /dev/null
@@ -1,213 +0,0 @@
-#!/usr/local/bin/perl
-# alpha assember 
-
-sub mul_add_c
-	{
-	local($a,$b,$c0,$c1,$c2)=@_;
-	local($l1,$h1,$t1,$t2);
-
-	&mul($a,$b,($l1)=&NR(1));
-	&muh($a,$b,($h1)=&NR(1));
-	&add($c0,$l1,$c0);
-	&cmpult($c0,$l1,($t1)=&NR(1));	&FR($l1);
-	&add($t1,$h1,$h1);		&FR($t1);
-	&add($c1,$h1,$c1);
-	&cmpult($c1,$h1,($t2)=&NR(1));	&FR($h1);
-	&add($c2,$t2,$c2);		&FR($t2);
-	}
-
-sub bn_mul_comba4
-	{
-	local($name)=@_;
-	local(@a,@b,$r,$c0,$c1,$c2);
-
-	$cnt=1;
-	&init_pool(3);
-
-	$rp=&wparam(0);
-	$ap=&wparam(1);
-	$bp=&wparam(2);
-
-	&function_begin($name,"");
-
-	&comment("");
-
-	&ld(($a[0])=&NR(1),&QWPw(0,$ap));
-	&ld(($b[0])=&NR(1),&QWPw(0,$bp));
-	&ld(($a[1])=&NR(1),&QWPw(1,$ap));
-	&ld(($b[1])=&NR(1),&QWPw(1,$bp));
-	&mul($a[0],$b[0],($r00)=&NR(1));
-	&ld(($a[2])=&NR(1),&QWPw(2,$ap));
-	&ld(($b[2])=&NR(1),&QWPw(2,$bp));
-	&muh($a[0],$b[0],($r01)=&NR(1));
-	&FR($ap); &ld(($a[3])=&NR(1),&QWPw(3,$ap));
-	&FR($bp); &ld(($b[3])=&NR(1),&QWPw(3,$bp));
-	&mul($a[0],$b[1],($r02)=&NR(1));
-
-	($R,$H1,$H2)=&NR(3);
-
-	&st($r00,&QWPw(0,$rp));	&FR($r00);
-
-	&mov("zero",$R);
-	&mul($a[1],$b[0],($r03)=&NR(1));
-
-	&mov("zero",$H1);
-	&mov("zero",$H0);
-	 &add($R,$r01,$R);
-	&muh($a[0],$b[1],($r04)=&NR(1));
-	 &cmpult($R,$r01,($t01)=&NR(1));	&FR($r01);
-	 &add($R,$r02,$R);
-	 &add($H1,$t01,$H1)			&FR($t01);
-	&muh($a[1],$b[0],($r05)=&NR(1));
-	 &cmpult($R,$r02,($t02)=&NR(1));	&FR($r02);
-	 &add($R,$r03,$R);
-	 &add($H2,$t02,$H2)			&FR($t02);
-	&mul($a[0],$b[2],($r06)=&NR(1));
-	 &cmpult($R,$r03,($t03)=&NR(1));	&FR($r03);
-	 &add($H1,$t03,$H1)			&FR($t03);
-	&st($R,&QWPw(1,$rp));
-	&add($H1,$H2,$R);
-
-	&mov("zero",$H1);
-	 &add($R,$r04,$R);
-	&mov("zero",$H2);
-	&mul($a[1],$b[1],($r07)=&NR(1));
-	 &cmpult($R,$r04,($t04)=&NR(1));	&FR($r04);
-	 &add($R,$r05,$R);
-	 &add($H1,$t04,$H1)			&FR($t04);
-	&mul($a[2],$b[0],($r08)=&NR(1));
-	 &cmpult($R,$r05,($t05)=&NR(1));	&FR($r05);
-	 &add($R,$r01,$R);
-	 &add($H2,$t05,$H2)			&FR($t05);
-	&muh($a[0],$b[2],($r09)=&NR(1));
-	 &cmpult($R,$r06,($t06)=&NR(1));	&FR($r06);
-	 &add($R,$r07,$R);
-	 &add($H1,$t06,$H1)			&FR($t06);
-	&muh($a[1],$b[1],($r10)=&NR(1));
-	 &cmpult($R,$r07,($t07)=&NR(1));	&FR($r07);
-	 &add($R,$r08,$R);
-	 &add($H2,$t07,$H2)			&FR($t07);
-	&muh($a[2],$b[0],($r11)=&NR(1));
-	 &cmpult($R,$r08,($t08)=&NR(1));	&FR($r08);
-	 &add($H1,$t08,$H1)			&FR($t08);
-	&st($R,&QWPw(2,$rp));
-	&add($H1,$H2,$R);
-
-	&mov("zero",$H1);
-	 &add($R,$r09,$R);
-	&mov("zero",$H2);
-	&mul($a[0],$b[3],($r12)=&NR(1));
-	 &cmpult($R,$r09,($t09)=&NR(1));	&FR($r09);
-	 &add($R,$r10,$R);
-	 &add($H1,$t09,$H1)			&FR($t09);
-	&mul($a[1],$b[2],($r13)=&NR(1));
-	 &cmpult($R,$r10,($t10)=&NR(1));	&FR($r10);
-	 &add($R,$r11,$R);
-	 &add($H1,$t10,$H1)			&FR($t10);
-	&mul($a[2],$b[1],($r14)=&NR(1));
-	 &cmpult($R,$r11,($t11)=&NR(1));	&FR($r11);
-	 &add($R,$r12,$R);
-	 &add($H1,$t11,$H1)			&FR($t11);
-	&mul($a[3],$b[0],($r15)=&NR(1));
-	 &cmpult($R,$r12,($t12)=&NR(1));	&FR($r12);
-	 &add($R,$r13,$R);
-	 &add($H1,$t12,$H1)			&FR($t12);
-	&muh($a[0],$b[3],($r16)=&NR(1));
-	 &cmpult($R,$r13,($t13)=&NR(1));	&FR($r13);
-	 &add($R,$r14,$R);
-	 &add($H1,$t13,$H1)			&FR($t13);
-	&muh($a[1],$b[2],($r17)=&NR(1));
-	 &cmpult($R,$r14,($t14)=&NR(1));	&FR($r14);
-	 &add($R,$r15,$R);
-	 &add($H1,$t14,$H1)			&FR($t14);
-	&muh($a[2],$b[1],($r18)=&NR(1));
-	 &cmpult($R,$r15,($t15)=&NR(1));	&FR($r15);
-	 &add($H1,$t15,$H1)			&FR($t15);
-	&st($R,&QWPw(3,$rp));
-	&add($H1,$H2,$R);
-
-	&mov("zero",$H1);
-	 &add($R,$r16,$R);
-	&mov("zero",$H2);
-	&muh($a[3],$b[0],($r19)=&NR(1));
-	 &cmpult($R,$r16,($t16)=&NR(1));	&FR($r16);
-	 &add($R,$r17,$R);
-	 &add($H1,$t16,$H1)			&FR($t16);
-	&mul($a[1],$b[3],($r20)=&NR(1));
-	 &cmpult($R,$r17,($t17)=&NR(1));	&FR($r17);
-	 &add($R,$r18,$R);
-	 &add($H1,$t17,$H1)			&FR($t17);
-	&mul($a[2],$b[2],($r21)=&NR(1));
-	 &cmpult($R,$r18,($t18)=&NR(1));	&FR($r18);
-	 &add($R,$r19,$R);
-	 &add($H1,$t18,$H1)			&FR($t18);
-	&mul($a[3],$b[1],($r22)=&NR(1));
-	 &cmpult($R,$r19,($t19)=&NR(1));	&FR($r19);
-	 &add($R,$r20,$R);
-	 &add($H1,$t19,$H1)			&FR($t19);
-	&muh($a[1],$b[3],($r23)=&NR(1));
-	 &cmpult($R,$r20,($t20)=&NR(1));	&FR($r20);
-	 &add($R,$r21,$R);
-	 &add($H1,$t20,$H1)			&FR($t20);
-	&muh($a[2],$b[2],($r24)=&NR(1));
-	 &cmpult($R,$r21,($t21)=&NR(1));	&FR($r21);
-	 &add($R,$r22,$R);
-	 &add($H1,$t21,$H1)			&FR($t21);
-	&muh($a[3],$b[1],($r25)=&NR(1));
-	 &cmpult($R,$r22,($t22)=&NR(1));	&FR($r22);
-	 &add($H1,$t22,$H1)			&FR($t22);
-	&st($R,&QWPw(4,$rp));
-	&add($H1,$H2,$R);
-
-	&mov("zero",$H1);
-	 &add($R,$r23,$R);
-	&mov("zero",$H2);
-	&mul($a[2],$b[3],($r26)=&NR(1));
-	 &cmpult($R,$r23,($t23)=&NR(1));	&FR($r23);
-	 &add($R,$r24,$R);
-	 &add($H1,$t23,$H1)			&FR($t23);
-	&mul($a[3],$b[2],($r27)=&NR(1));
-	 &cmpult($R,$r24,($t24)=&NR(1));	&FR($r24);
-	 &add($R,$r25,$R);
-	 &add($H1,$t24,$H1)			&FR($t24);
-	&muh($a[2],$b[3],($r28)=&NR(1));
-	 &cmpult($R,$r25,($t25)=&NR(1));	&FR($r25);
-	 &add($R,$r26,$R);
-	 &add($H1,$t25,$H1)			&FR($t25);
-	&muh($a[3],$b[2],($r29)=&NR(1));
-	 &cmpult($R,$r26,($t26)=&NR(1));	&FR($r26);
-	 &add($R,$r27,$R);
-	 &add($H1,$t26,$H1)			&FR($t26);
-	&mul($a[3],$b[3],($r30)=&NR(1));
-	 &cmpult($R,$r27,($t27)=&NR(1));	&FR($r27);
-	 &add($H1,$t27,$H1)			&FR($t27);
-	&st($R,&QWPw(5,$rp));
-	&add($H1,$H2,$R);
-
-	&mov("zero",$H1);
-	 &add($R,$r28,$R);
-	&mov("zero",$H2);
-	&muh($a[3],$b[3],($r31)=&NR(1));
-	 &cmpult($R,$r28,($t28)=&NR(1));	&FR($r28);
-	 &add($R,$r29,$R);
-	 &add($H1,$t28,$H1)			&FR($t28);
-	############
-	 &cmpult($R,$r29,($t29)=&NR(1));	&FR($r29);
-	 &add($R,$r30,$R);
-	 &add($H1,$t29,$H1)			&FR($t29);
-        ############
-	 &cmpult($R,$r30,($t30)=&NR(1));	&FR($r30);
-	 &add($H1,$t30,$H1)			&FR($t30);
-	&st($R,&QWPw(6,$rp));
-	&add($H1,$H2,$R);
-
-	 &add($R,$r31,$R);			&FR($r31);
-	&st($R,&QWPw(7,$rp));
-
-	&FR($R,$H1,$H2);
-	&function_end($name);
-
-	&fin_pool;
-	}
-
-1;
diff --git a/crypto/openssl/crypto/bn/asm/alpha.works/mul_c4.works.pl b/crypto/openssl/crypto/bn/asm/alpha.works/mul_c4.works.pl
deleted file mode 100644
index 79d86dd25cd1..000000000000
--- a/crypto/openssl/crypto/bn/asm/alpha.works/mul_c4.works.pl
+++ /dev/null
@@ -1,98 +0,0 @@
-#!/usr/local/bin/perl
-# alpha assember 
-
-sub mul_add_c
-	{
-	local($a,$b,$c0,$c1,$c2)=@_;
-	local($l1,$h1,$t1,$t2);
-
-print STDERR "count=$cnt\n"; $cnt++;
-	&mul($a,$b,($l1)=&NR(1));
-	&muh($a,$b,($h1)=&NR(1));
-	&add($c0,$l1,$c0);
-	&cmpult($c0,$l1,($t1)=&NR(1));	&FR($l1);
-	&add($t1,$h1,$h1);		&FR($t1);
-	&add($c1,$h1,$c1);
-	&cmpult($c1,$h1,($t2)=&NR(1));	&FR($h1);
-	&add($c2,$t2,$c2);		&FR($t2);
-	}
-
-sub bn_mul_comba4
-	{
-	local($name)=@_;
-	local(@a,@b,$r,$c0,$c1,$c2);
-
-	$cnt=1;
-	&init_pool(3);
-
-	$rp=&wparam(0);
-	$ap=&wparam(1);
-	$bp=&wparam(2);
-
-	&function_begin($name,"");
-
-	&comment("");
-
-	&ld(($a[0])=&NR(1),&QWPw(0,$ap));
-	&ld(($b[0])=&NR(1),&QWPw(0,$bp));
-	&ld(($a[1])=&NR(1),&QWPw(1,$ap));
-	&ld(($b[1])=&NR(1),&QWPw(1,$bp));
-	&ld(($a[2])=&NR(1),&QWPw(2,$ap));
-	&ld(($b[2])=&NR(1),&QWPw(2,$bp));
-	&ld(($a[3])=&NR(1),&QWPw(3,$ap));	&FR($ap);
-	&ld(($b[3])=&NR(1),&QWPw(3,$bp));	&FR($bp);
-
-	($c0,$c1,$c2)=&NR(3);
-	&mov("zero",$c2);
-	&mul($a[0],$b[0],$c0);
-	&muh($a[0],$b[0],$c1);
-	&st($c0,&QWPw(0,$rp));			&FR($c0); ($c0)=&NR($c0);
-	($c0,$c1,$c2)=($c1,$c2,$c0);
-	&mov("zero",$c2);
-
-	&mul_add_c($a[0],$b[1],$c0,$c1,$c2);
-	&mul_add_c($a[1],$b[0],$c0,$c1,$c2);
-	&st($c0,&QWPw(1,$rp));			&FR($c0); ($c0)=&NR($c0);
-	($c0,$c1,$c2)=($c1,$c2,$c0);
-	&mov("zero",$c2);
-
-	&mul_add_c($a[1],$b[1],$c0,$c1,$c2);
-	&mul_add_c($a[0],$b[2],$c0,$c1,$c2);
-	&mul_add_c($a[2],$b[0],$c0,$c1,$c2);
-	&st($c0,&QWPw(2,$rp));			&FR($c0); ($c0)=&NR($c0);
-	($c0,$c1,$c2)=($c1,$c2,$c0);
-	&mov("zero",$c2);
-
-	&mul_add_c($a[0],$b[3],$c0,$c1,$c2);	&FR($a[0]);
-	&mul_add_c($a[1],$b[2],$c0,$c1,$c2);
-	&mul_add_c($a[2],$b[1],$c0,$c1,$c2);
-	&mul_add_c($a[3],$b[0],$c0,$c1,$c2);	&FR($b[0]);
-	&st($c0,&QWPw(3,$rp));			&FR($c0); ($c0)=&NR($c0);
-	($c0,$c1,$c2)=($c1,$c2,$c0);
-	&mov("zero",$c2);
-
-	&mul_add_c($a[1],$b[3],$c0,$c1,$c2);	&FR($a[1]);
-	&mul_add_c($a[2],$b[2],$c0,$c1,$c2);
-	&mul_add_c($a[3],$b[1],$c0,$c1,$c2);	&FR($b[1]);
-	&st($c0,&QWPw(4,$rp));			&FR($c0); ($c0)=&NR($c0);
-	($c0,$c1,$c2)=($c1,$c2,$c0);
-	&mov("zero",$c2);
-
-	&mul_add_c($a[2],$b[3],$c0,$c1,$c2);	&FR($a[2]);
-	&mul_add_c($a[3],$b[2],$c0,$c1,$c2);	&FR($b[2]);
-	&st($c0,&QWPw(5,$rp));			&FR($c0); ($c0)=&NR($c0);
-	($c0,$c1,$c2)=($c1,$c2,$c0);
-	&mov("zero",$c2);
-
-	&mul_add_c($a[3],$b[3],$c0,$c1,$c2);	&FR($a[3],$b[3]);
-	&st($c0,&QWPw(6,$rp));
-	&st($c1,&QWPw(7,$rp));
-
-	&FR($c0,$c1,$c2);
-
-	&function_end($name);
-
-	&fin_pool;
-	}
-
-1;
diff --git a/crypto/openssl/crypto/bn/asm/alpha.works/mul_c8.pl b/crypto/openssl/crypto/bn/asm/alpha.works/mul_c8.pl
deleted file mode 100644
index 525ca7494b73..000000000000
--- a/crypto/openssl/crypto/bn/asm/alpha.works/mul_c8.pl
+++ /dev/null
@@ -1,177 +0,0 @@
-#!/usr/local/bin/perl
-# alpha assember 
-
-sub bn_mul_comba8
-	{
-	local($name)=@_;
-	local(@a,@b,$r,$c0,$c1,$c2);
-
-	$cnt=1;
-	&init_pool(3);
-
-	$rp=&wparam(0);
-	$ap=&wparam(1);
-	$bp=&wparam(2);
-
-	&function_begin($name,"");
-
-	&comment("");
-
-	&stack_push(2);
-	&ld(($a[0])=&NR(1),&QWPw(0,$ap));
-	&ld(($b[0])=&NR(1),&QWPw(0,$bp));
-	&st($reg_s0,&swtmp(0)); &FR($reg_s0);
-	&st($reg_s1,&swtmp(1)); &FR($reg_s1);
-	&ld(($a[1])=&NR(1),&QWPw(1,$ap));
-	&ld(($b[1])=&NR(1),&QWPw(1,$bp));
-	&ld(($a[2])=&NR(1),&QWPw(2,$ap));
-	&ld(($b[2])=&NR(1),&QWPw(2,$bp));
-	&ld(($a[3])=&NR(1),&QWPw(3,$ap));
-	&ld(($b[3])=&NR(1),&QWPw(3,$bp));
-	&ld(($a[4])=&NR(1),&QWPw(1,$ap));
-	&ld(($b[4])=&NR(1),&QWPw(1,$bp));
-	&ld(($a[5])=&NR(1),&QWPw(1,$ap));
-	&ld(($b[5])=&NR(1),&QWPw(1,$bp));
-	&ld(($a[6])=&NR(1),&QWPw(1,$ap));
-	&ld(($b[6])=&NR(1),&QWPw(1,$bp));
-	&ld(($a[7])=&NR(1),&QWPw(1,$ap));	&FR($ap);
-	&ld(($b[7])=&NR(1),&QWPw(1,$bp));	&FR($bp);
-
-	($c0,$c1,$c2)=&NR(3);
-	&mov("zero",$c2);
-	&mul($a[0],$b[0],$c0);
-	&muh($a[0],$b[0],$c1);
-	&st($c0,&QWPw(0,$rp));			&FR($c0); ($c0)=&NR(1);
-	($c0,$c1,$c2)=($c1,$c2,$c0);
-	&mov("zero",$c2);
-
-	&mul_add_c($a[0],$b[1],$c0,$c1,$c2);
-	&mul_add_c($a[1],$b[0],$c0,$c1,$c2);
-	&st($c0,&QWPw(1,$rp));			&FR($c0); ($c0)=&NR(1);
-	($c0,$c1,$c2)=($c1,$c2,$c0);
-	&mov("zero",$c2);
-
-	&mul_add_c($a[0],$b[2],$c0,$c1,$c2);
-	&mul_add_c($a[1],$b[1],$c0,$c1,$c2);
-	&mul_add_c($a[2],$b[0],$c0,$c1,$c2);
-	&st($c0,&QWPw(2,$rp));			&FR($c0); ($c0)=&NR(1);
-	($c0,$c1,$c2)=($c1,$c2,$c0);
-	&mov("zero",$c2);
-
-	&mul_add_c($a[0],$b[3],$c0,$c1,$c2);
-	&mul_add_c($a[1],$b[2],$c0,$c1,$c2);
-	&mul_add_c($a[2],$b[1],$c0,$c1,$c2);
-	&mul_add_c($a[3],$b[0],$c0,$c1,$c2);
-	&st($c0,&QWPw(3,$rp));			&FR($c0); ($c0)=&NR(1);
-	($c0,$c1,$c2)=($c1,$c2,$c0);
-	&mov("zero",$c2);
-
-	&mul_add_c($a[0],$b[4],$c0,$c1,$c2);
-	&mul_add_c($a[1],$b[3],$c0,$c1,$c2);
-	&mul_add_c($a[2],$b[2],$c0,$c1,$c2);
-	&mul_add_c($a[3],$b[1],$c0,$c1,$c2);
-	&mul_add_c($a[4],$b[0],$c0,$c1,$c2);
-	&st($c0,&QWPw(4,$rp));			&FR($c0); ($c0)=&NR(1);
-	($c0,$c1,$c2)=($c1,$c2,$c0);
-	&mov("zero",$c2);
-
-	&mul_add_c($a[0],$b[5],$c0,$c1,$c2);
-	&mul_add_c($a[1],$b[4],$c0,$c1,$c2);
-	&mul_add_c($a[2],$b[3],$c0,$c1,$c2);
-	&mul_add_c($a[3],$b[2],$c0,$c1,$c2);
-	&mul_add_c($a[4],$b[1],$c0,$c1,$c2);
-	&mul_add_c($a[5],$b[0],$c0,$c1,$c2);
-	&st($c0,&QWPw(5,$rp));			&FR($c0); ($c0)=&NR(1);
-	($c0,$c1,$c2)=($c1,$c2,$c0);
-	&mov("zero",$c2);
-
-	&mul_add_c($a[0],$b[6],$c0,$c1,$c2);
-	&mul_add_c($a[1],$b[5],$c0,$c1,$c2);
-	&mul_add_c($a[2],$b[4],$c0,$c1,$c2);
-	&mul_add_c($a[3],$b[3],$c0,$c1,$c2);
-	&mul_add_c($a[4],$b[2],$c0,$c1,$c2);
-	&mul_add_c($a[5],$b[1],$c0,$c1,$c2);
-	&mul_add_c($a[6],$b[0],$c0,$c1,$c2);
-	&st($c0,&QWPw(6,$rp));			&FR($c0); ($c0)=&NR(1);
-	($c0,$c1,$c2)=($c1,$c2,$c0);
-	&mov("zero",$c2);
-
-	&mul_add_c($a[0],$b[7],$c0,$c1,$c2);	&FR($a[0]);
-	&mul_add_c($a[1],$b[6],$c0,$c1,$c2);
-	&mul_add_c($a[2],$b[5],$c0,$c1,$c2);
-	&mul_add_c($a[3],$b[4],$c0,$c1,$c2);
-	&mul_add_c($a[4],$b[3],$c0,$c1,$c2);
-	&mul_add_c($a[5],$b[2],$c0,$c1,$c2);
-	&mul_add_c($a[6],$b[1],$c0,$c1,$c2);
-	&mul_add_c($a[7],$b[0],$c0,$c1,$c2);	&FR($b[0]);
-	&st($c0,&QWPw(7,$rp));			&FR($c0); ($c0)=&NR(1);
-	($c0,$c1,$c2)=($c1,$c2,$c0);
-	&mov("zero",$c2);
-
-	&mul_add_c($a[1],$b[7],$c0,$c1,$c2);	&FR($a[1]);
-	&mul_add_c($a[2],$b[6],$c0,$c1,$c2);
-	&mul_add_c($a[3],$b[5],$c0,$c1,$c2);
-	&mul_add_c($a[4],$b[4],$c0,$c1,$c2);
-	&mul_add_c($a[5],$b[3],$c0,$c1,$c2);
-	&mul_add_c($a[6],$b[2],$c0,$c1,$c2);
-	&mul_add_c($a[7],$b[1],$c0,$c1,$c2);	&FR($b[1]);
-	&st($c0,&QWPw(8,$rp));			&FR($c0); ($c0)=&NR(1);
-	($c0,$c1,$c2)=($c1,$c2,$c0);
-	&mov("zero",$c2);
-
-	&mul_add_c($a[2],$b[7],$c0,$c1,$c2);	&FR($a[2]);
-	&mul_add_c($a[3],$b[6],$c0,$c1,$c2);
-	&mul_add_c($a[4],$b[5],$c0,$c1,$c2);
-	&mul_add_c($a[5],$b[4],$c0,$c1,$c2);
-	&mul_add_c($a[6],$b[3],$c0,$c1,$c2);
-	&mul_add_c($a[7],$b[2],$c0,$c1,$c2);	&FR($b[2]);
-	&st($c0,&QWPw(9,$rp));			&FR($c0); ($c0)=&NR(1);
-	($c0,$c1,$c2)=($c1,$c2,$c0);
-	&mov("zero",$c2);
-
-	&mul_add_c($a[3],$b[7],$c0,$c1,$c2);	&FR($a[3]);
-	&mul_add_c($a[4],$b[6],$c0,$c1,$c2);
-	&mul_add_c($a[5],$b[5],$c0,$c1,$c2);
-	&mul_add_c($a[6],$b[4],$c0,$c1,$c2);
-	&mul_add_c($a[7],$b[3],$c0,$c1,$c2);	&FR($b[3]);
-	&st($c0,&QWPw(10,$rp));			&FR($c0); ($c0)=&NR(1);
-	($c0,$c1,$c2)=($c1,$c2,$c0);
-	&mov("zero",$c2);
-
-	&mul_add_c($a[4],$b[7],$c0,$c1,$c2);	&FR($a[4]);
-	&mul_add_c($a[5],$b[6],$c0,$c1,$c2);
-	&mul_add_c($a[6],$b[5],$c0,$c1,$c2);
-	&mul_add_c($a[7],$b[4],$c0,$c1,$c2);	&FR($b[4]);
-	&st($c0,&QWPw(11,$rp));			&FR($c0); ($c0)=&NR(1);
-	($c0,$c1,$c2)=($c1,$c2,$c0);
-	&mov("zero",$c2);
-
-	&mul_add_c($a[5],$b[7],$c0,$c1,$c2);	&FR($a[5]);
-	&mul_add_c($a[6],$b[6],$c0,$c1,$c2);
-	&mul_add_c($a[7],$b[5],$c0,$c1,$c2);	&FR($b[5]);
-	&st($c0,&QWPw(12,$rp));			&FR($c0); ($c0)=&NR(1);
-	($c0,$c1,$c2)=($c1,$c2,$c0);
-	&mov("zero",$c2);
-
-	&mul_add_c($a[6],$b[7],$c0,$c1,$c2);	&FR($a[6]);
-	&mul_add_c($a[7],$b[6],$c0,$c1,$c2);	&FR($b[6]);
-	&st($c0,&QWPw(13,$rp));			&FR($c0); ($c0)=&NR(1);
-	($c0,$c1,$c2)=($c1,$c2,$c0);
-	&mov("zero",$c2);
-
-	&mul_add_c($a[7],$b[7],$c0,$c1,$c2);	&FR($a[7],$b[7]);
-	&st($c0,&QWPw(14,$rp));
-	&st($c1,&QWPw(15,$rp));
-
-	&FR($c0,$c1,$c2);
-
-	&ld($reg_s0,&swtmp(0));
-	&ld($reg_s1,&swtmp(1));
-	&stack_pop(2);
-
-	&function_end($name);
-
-	&fin_pool;
-	}
-
-1;
diff --git a/crypto/openssl/crypto/bn/asm/alpha.works/sqr.pl b/crypto/openssl/crypto/bn/asm/alpha.works/sqr.pl
deleted file mode 100644
index a55b696906e1..000000000000
--- a/crypto/openssl/crypto/bn/asm/alpha.works/sqr.pl
+++ /dev/null
@@ -1,113 +0,0 @@
-#!/usr/local/bin/perl
-# alpha assember 
-
-sub bn_sqr_words
-	{
-	local($name)=@_;
-	local($cc,$a,$b,$r,$couny);
-
-	&init_pool(3);
-	($cc)=GR("r0");
-
-	$rp=&wparam(0);
-	$ap=&wparam(1);
-	$count=&wparam(2);
-
-	&function_begin($name,"");
-
-	&comment("");
-	&sub($count,4,$count);
-	&mov("zero",$cc);
-	&br(&label("finish"));
-	&blt($count,&label("finish"));
-
-	($a0,$r0)=&NR(2);
-	&ld($a0,&QWPw(0,$ap));
-	&ld($r0,&QWPw(0,$rp));
-
-$a=<<'EOF';
-##########################################################
-	&set_label("loop");
-
-	($a1)=&NR(1); &ld($a1,&QWPw(1,$ap));
-	($b1)=&NR(1); &ld($b1,&QWPw(1,$bp));
-	($a2)=&NR(1); &ld($a2,&QWPw(2,$ap));
-	($b2)=&NR(1); &ld($b2,&QWPw(2,$bp));
-	($a3)=&NR(1); &ld($a3,&QWPw(3,$ap));
-	($b3)=&NR(1); &ld($b3,&QWPw(3,$bp));
-
-	($o0,$t0)=&NR(2);
-	&add($a0,$b0,$o0); 
-	&cmpult($o0,$b0,$t0);
-	&add($o0,$cc,$o0);
-	&cmpult($o0,$cc,$cc);
-	&add($cc,$t0,$cc);	&FR($t0);
-
-	($t1,$o1)=&NR(2);
-
-	&add($a1,$b1,$o1);	&FR($a1);
-	&cmpult($o1,$b1,$t1);	&FR($b1);
-	&add($o1,$cc,$o1);
-	&cmpult($o1,$cc,$cc);
-	&add($cc,$t1,$cc);	&FR($t1);
-
-	($t2,$o2)=&NR(2);
-
-	&add($a2,$b2,$o2);	&FR($a2);
-	&cmpult($o2,$b2,$t2);	&FR($b2);
-	&add($o2,$cc,$o2);
-	&cmpult($o2,$cc,$cc);
-	&add($cc,$t2,$cc);	&FR($t2);
-
-	($t3,$o3)=&NR(2);
-
-	&add($a3,$b3,$o3);	&FR($a3);
-	&cmpult($o3,$b3,$t3);	&FR($b3);
-	&add($o3,$cc,$o3);
-	&cmpult($o3,$cc,$cc);
-	&add($cc,$t3,$cc);	&FR($t3);
-
-	&st($o0,&QWPw(0,$rp)); &FR($o0);
-	&st($o1,&QWPw(0,$rp)); &FR($o1);
-	&st($o2,&QWPw(0,$rp)); &FR($o2);
-	&st($o3,&QWPw(0,$rp)); &FR($o3);
-
-	&sub($count,4,$count);	# count-=4
-	&add($ap,4*$QWS,$ap);	# count+=4
-	&add($bp,4*$QWS,$bp);	# count+=4
-	&add($rp,4*$QWS,$rp);	# count+=4
-
-	&blt($count,&label("finish"));
-	&ld($a0,&QWPw(0,$ap));
-	 &ld($b0,&QWPw(0,$bp));
-	&br(&label("loop"));
-EOF
-##################################################
-	# Do the last 0..3 words
-
-	&set_label("last_loop");
-
-	&ld(($a0)=&NR(1),&QWPw(0,$ap));	# get a
-	&mul($a0,$a0,($l0)=&NR(1));
-	 &add($ap,$QWS,$ap);
-	 &add($rp,2*$QWS,$rp);
-	 &sub($count,1,$count);
-	&muh($a0,$a0,($h0)=&NR(1));	&FR($a0);
-	&st($l0,&QWPw(-2,$rp));		&FR($l0);
-	&st($h0,&QWPw(-1,$rp));		&FR($h0);
-
-	&bgt($count,&label("last_loop"));
-	&function_end_A($name);
-
-######################################################
-	&set_label("finish");
-	&add($count,4,$count);
-	&bgt($count,&label("last_loop"));
-
-	&set_label("end");
-	&function_end($name);
-
-	&fin_pool;
-	}
-
-1;
diff --git a/crypto/openssl/crypto/bn/asm/alpha.works/sqr_c4.pl b/crypto/openssl/crypto/bn/asm/alpha.works/sqr_c4.pl
deleted file mode 100644
index bf33f5b50372..000000000000
--- a/crypto/openssl/crypto/bn/asm/alpha.works/sqr_c4.pl
+++ /dev/null
@@ -1,109 +0,0 @@
-#!/usr/local/bin/perl
-# alpha assember 
-
-sub sqr_add_c
-	{
-	local($a,$c0,$c1,$c2)=@_;
-	local($l1,$h1,$t1,$t2);
-
-	&mul($a,$a,($l1)=&NR(1));
-	&muh($a,$a,($h1)=&NR(1));
-	&add($c0,$l1,$c0);
-	&add($c1,$h1,$c1);
-	&cmpult($c0,$l1,($t1)=&NR(1));	&FR($l1);
-	&cmpult($c1,$h1,($t2)=&NR(1));	&FR($h1);
-	&add($c1,$t1,$c1);		&FR($t1);
-	&add($c2,$t2,$c2);		&FR($t2);
-	}
-
-sub sqr_add_c2
-	{
-	local($a,$b,$c0,$c1,$c2)=@_;
-	local($l1,$h1,$t1,$t2);
-
-	&mul($a,$b,($l1)=&NR(1));
-	&muh($a,$b,($h1)=&NR(1));
-	&cmplt($l1,"zero",($lc1)=&NR(1));
-	&cmplt($h1,"zero",($hc1)=&NR(1));
-	&add($l1,$l1,$l1);
-	&add($h1,$h1,$h1);
-	&add($h1,$lc1,$h1);		&FR($lc1);
-	&add($c2,$hc1,$c2);		&FR($hc1);
-
-	&add($c0,$l1,$c0);
-	&add($c1,$h1,$c1);
-	&cmpult($c0,$l1,($lc1)=&NR(1));	&FR($l1);
-	&cmpult($c1,$h1,($hc1)=&NR(1));	&FR($h1);
-
-	&add($c1,$lc1,$c1);		&FR($lc1);
-	&add($c2,$hc1,$c2);		&FR($hc1);
-	}
-
-
-sub bn_sqr_comba4
-	{
-	local($name)=@_;
-	local(@a,@b,$r,$c0,$c1,$c2);
-
-	$cnt=1;
-	&init_pool(2);
-
-	$rp=&wparam(0);
-	$ap=&wparam(1);
-
-	&function_begin($name,"");
-
-	&comment("");
-
-	&ld(($a[0])=&NR(1),&QWPw(0,$ap));
-	&ld(($a[1])=&NR(1),&QWPw(1,$ap));
-	&ld(($a[2])=&NR(1),&QWPw(2,$ap));
-        &ld(($a[3])=&NR(1),&QWPw(3,$ap)); &FR($ap);
-
-	($c0,$c1,$c2)=&NR(3);
-
-	&mov("zero",$c2);
-	&mul($a[0],$a[0],$c0);
-	&muh($a[0],$a[0],$c1);
-	&st($c0,&QWPw(0,$rp));
-	($c0,$c1,$c2)=($c1,$c2,$c0);
-	&mov("zero",$c2);
-
-	&sqr_add_c2($a[0],$a[1],$c0,$c1,$c2);
-	&st($c0,&QWPw(1,$rp));
-	($c0,$c1,$c2)=($c1,$c2,$c0);
-	&mov("zero",$c2);
-
-	&sqr_add_c($a[1],$c0,$c1,$c2);
-	&sqr_add_c2($a[2],$a[0],$c0,$c1,$c2);
-	&st($c0,&QWPw(2,$rp));
-	($c0,$c1,$c2)=($c1,$c2,$c0);
-	&mov("zero",$c2);
-
-	&sqr_add_c2($a[3],$a[0],$c0,$c1,$c2);
-	&sqr_add_c2($a[2],$a[1],$c0,$c1,$c2);
-	&st($c0,&QWPw(3,$rp));
-	($c0,$c1,$c2)=($c1,$c2,$c0);
-	&mov("zero",$c2);
-
-	&sqr_add_c($a[2],$c0,$c1,$c2);
-	&sqr_add_c2($a[3],$a[1],$c0,$c1,$c2);
-	&st($c0,&QWPw(4,$rp));
-	($c0,$c1,$c2)=($c1,$c2,$c0);
-	&mov("zero",$c2);
-
-	&sqr_add_c2($a[3],$a[2],$c0,$c1,$c2);
-	&st($c0,&QWPw(5,$rp));
-	($c0,$c1,$c2)=($c1,$c2,$c0);
-	&mov("zero",$c2);
-
-	&sqr_add_c($a[3],$c0,$c1,$c2);
-	&st($c0,&QWPw(6,$rp));
-	&st($c1,&QWPw(7,$rp));
-
-	&function_end($name);
-
-	&fin_pool;
-	}
-
-1;
diff --git a/crypto/openssl/crypto/bn/asm/alpha.works/sqr_c8.pl b/crypto/openssl/crypto/bn/asm/alpha.works/sqr_c8.pl
deleted file mode 100644
index b4afe085f1c9..000000000000
--- a/crypto/openssl/crypto/bn/asm/alpha.works/sqr_c8.pl
+++ /dev/null
@@ -1,132 +0,0 @@
-#!/usr/local/bin/perl
-# alpha assember 
-
-sub bn_sqr_comba8
-	{
-	local($name)=@_;
-	local(@a,@b,$r,$c0,$c1,$c2);
-
-	$cnt=1;
-	&init_pool(2);
-
-	$rp=&wparam(0);
-	$ap=&wparam(1);
-
-	&function_begin($name,"");
-
-	&comment("");
-
-	&ld(($a[0])=&NR(1),&QWPw(0,$ap));
-	&ld(($a[1])=&NR(1),&QWPw(1,$ap));
-	&ld(($a[2])=&NR(1),&QWPw(2,$ap));
-	&ld(($a[3])=&NR(1),&QWPw(3,$ap));
-	&ld(($a[4])=&NR(1),&QWPw(4,$ap));
-	&ld(($a[5])=&NR(1),&QWPw(5,$ap));
-	&ld(($a[6])=&NR(1),&QWPw(6,$ap));
-        &ld(($a[7])=&NR(1),&QWPw(7,$ap)); &FR($ap);
-
-	($c0,$c1,$c2)=&NR(3);
-
-	&mov("zero",$c2);
-	&mul($a[0],$a[0],$c0);
-	&muh($a[0],$a[0],$c1);
-	&st($c0,&QWPw(0,$rp));
-	($c0,$c1,$c2)=($c1,$c2,$c0);
-	&mov("zero",$c2);
-
-	&sqr_add_c2($a[1],$a[0],$c0,$c1,$c2);
-	&st($c0,&QWPw(1,$rp));
-	($c0,$c1,$c2)=($c1,$c2,$c0);
-	&mov("zero",$c2);
-
-	&sqr_add_c($a[1],$c0,$c1,$c2);
-	&sqr_add_c2($a[2],$a[0],$c0,$c1,$c2);
-	&st($c0,&QWPw(2,$rp));
-	($c0,$c1,$c2)=($c1,$c2,$c0);
-	&mov("zero",$c2);
-
-	&sqr_add_c2($a[2],$a[1],$c0,$c1,$c2);
-	&sqr_add_c2($a[3],$a[0],$c0,$c1,$c2);
-	&st($c0,&QWPw(3,$rp));
-	($c0,$c1,$c2)=($c1,$c2,$c0);
-	&mov("zero",$c2);
-
-	&sqr_add_c($a[2],$c0,$c1,$c2);
-	&sqr_add_c2($a[3],$a[1],$c0,$c1,$c2);
-	&sqr_add_c2($a[4],$a[0],$c0,$c1,$c2);
-	&st($c0,&QWPw(4,$rp));
-	($c0,$c1,$c2)=($c1,$c2,$c0);
-	&mov("zero",$c2);
-
-	&sqr_add_c2($a[3],$a[2],$c0,$c1,$c2);
-	&sqr_add_c2($a[4],$a[1],$c0,$c1,$c2);
-	&sqr_add_c2($a[5],$a[0],$c0,$c1,$c2);
-	&st($c0,&QWPw(5,$rp));
-	($c0,$c1,$c2)=($c1,$c2,$c0);
-	&mov("zero",$c2);
-
-	&sqr_add_c($a[3],$c0,$c1,$c2);
-	&sqr_add_c2($a[4],$a[2],$c0,$c1,$c2);
-	&sqr_add_c2($a[5],$a[1],$c0,$c1,$c2);
-	&sqr_add_c2($a[6],$a[0],$c0,$c1,$c2);
-	&st($c0,&QWPw(6,$rp));
-	($c0,$c1,$c2)=($c1,$c2,$c0);
-	&mov("zero",$c2);
-
-	&sqr_add_c2($a[4],$a[3],$c0,$c1,$c2);
-	&sqr_add_c2($a[5],$a[2],$c0,$c1,$c2);
-	&sqr_add_c2($a[6],$a[1],$c0,$c1,$c2);
-	&sqr_add_c2($a[7],$a[0],$c0,$c1,$c2);
-	&st($c0,&QWPw(7,$rp));
-	($c0,$c1,$c2)=($c1,$c2,$c0);
-	&mov("zero",$c2);
-
-	&sqr_add_c($a[4],$c0,$c1,$c2);
-	&sqr_add_c2($a[5],$a[3],$c0,$c1,$c2);
-	&sqr_add_c2($a[6],$a[2],$c0,$c1,$c2);
-	&sqr_add_c2($a[7],$a[1],$c0,$c1,$c2);
-	&st($c0,&QWPw(8,$rp));
-	($c0,$c1,$c2)=($c1,$c2,$c0);
-	&mov("zero",$c2);
-
-	&sqr_add_c2($a[5],$a[4],$c0,$c1,$c2);
-	&sqr_add_c2($a[6],$a[3],$c0,$c1,$c2);
-	&sqr_add_c2($a[7],$a[2],$c0,$c1,$c2);
-	&st($c0,&QWPw(9,$rp));
-	($c0,$c1,$c2)=($c1,$c2,$c0);
-	&mov("zero",$c2);
-
-	&sqr_add_c($a[5],$c0,$c1,$c2);
-	&sqr_add_c2($a[6],$a[4],$c0,$c1,$c2);
-	&sqr_add_c2($a[7],$a[3],$c0,$c1,$c2);
-	&st($c0,&QWPw(10,$rp));
-	($c0,$c1,$c2)=($c1,$c2,$c0);
-	&mov("zero",$c2);
-
-	&sqr_add_c2($a[6],$a[5],$c0,$c1,$c2);
-	&sqr_add_c2($a[7],$a[4],$c0,$c1,$c2);
-	&st($c0,&QWPw(11,$rp));
-	($c0,$c1,$c2)=($c1,$c2,$c0);
-	&mov("zero",$c2);
-
-	&sqr_add_c($a[6],$c0,$c1,$c2);
-	&sqr_add_c2($a[7],$a[5],$c0,$c1,$c2);
-	&st($c0,&QWPw(12,$rp));
-	($c0,$c1,$c2)=($c1,$c2,$c0);
-	&mov("zero",$c2);
-
-	&sqr_add_c2($a[7],$a[6],$c0,$c1,$c2);
-	&st($c0,&QWPw(13,$rp));
-	($c0,$c1,$c2)=($c1,$c2,$c0);
-	&mov("zero",$c2);
-
-	&sqr_add_c($a[7],$c0,$c1,$c2);
-	&st($c0,&QWPw(14,$rp));
-	&st($c1,&QWPw(15,$rp));
-
-	&function_end($name);
-
-	&fin_pool;
-	}
-
-1;
diff --git a/crypto/openssl/crypto/bn/asm/alpha.works/sub.pl b/crypto/openssl/crypto/bn/asm/alpha.works/sub.pl
deleted file mode 100644
index d998da5c21a2..000000000000
--- a/crypto/openssl/crypto/bn/asm/alpha.works/sub.pl
+++ /dev/null
@@ -1,108 +0,0 @@
-#!/usr/local/bin/perl
-# alpha assember
-
-sub bn_sub_words
-	{
-	local($name)=@_;
-	local($cc,$a,$b,$r);
-
-	&init_pool(4);
-	($cc)=GR("r0");
-
-	$rp=&wparam(0);
-	$ap=&wparam(1);
-	$bp=&wparam(2);
-	$count=&wparam(3);
-
-	&function_begin($name,"");
-
-	&comment("");
-	&sub($count,4,$count);
-	&mov("zero",$cc);
-	&blt($count,&label("finish"));
-
-	($a0,$b0)=&NR(2);
-	&ld($a0,&QWPw(0,$ap));
-	&ld($b0,&QWPw(0,$bp));
-
-##########################################################
-	&set_label("loop");
-
-	($a1,$tmp,$b1,$a2,$b2,$a3,$b3,$o0)=&NR(8);
-	&ld($a1,&QWPw(1,$ap));
-	 &cmpult($a0,$b0,$tmp);	# will we borrow?
-	&ld($b1,&QWPw(1,$bp));
-	 &sub($a0,$b0,$a0);		# do the subtract
-	&ld($a2,&QWPw(2,$ap));
-	 &cmpult($a0,$cc,$b0);	# will we borrow?
-	&ld($b2,&QWPw(2,$bp));
-	 &sub($a0,$cc,$o0);	# will we borrow?
-	&ld($a3,&QWPw(3,$ap));
-	 &add($b0,$tmp,$cc); ($t1,$o1)=&NR(2); &FR($tmp);
-
-	&cmpult($a1,$b1,$t1);	# will we borrow?
-	 &sub($a1,$b1,$a1);	# do the subtract
-	&ld($b3,&QWPw(3,$bp));
-	 &cmpult($a1,$cc,$b1);	# will we borrow?
-	&sub($a1,$cc,$o1);	# will we borrow?
-	 &add($b1,$t1,$cc); ($tmp,$o2)=&NR(2); &FR($t1,$a1,$b1);
-	
-	&cmpult($a2,$b2,$tmp);	# will we borrow?
-	 &sub($a2,$b2,$a2);		# do the subtract
-	&st($o0,&QWPw(0,$rp));	&FR($o0); # save
-	 &cmpult($a2,$cc,$b2);	# will we borrow?
-	&sub($a2,$cc,$o2);	# will we borrow?
-	 &add($b2,$tmp,$cc); ($t3,$o3)=&NR(2); &FR($tmp,$a2,$b2);
-
-	&cmpult($a3,$b3,$t3);	# will we borrow?
-	 &sub($a3,$b3,$a3);	# do the subtract
-	&st($o1,&QWPw(1,$rp)); &FR($o1);
-	 &cmpult($a3,$cc,$b3);	# will we borrow?
-	&sub($a3,$cc,$o3);	# will we borrow?
-	 &add($b3,$t3,$cc); &FR($t3,$a3,$b3);
-
-	&st($o2,&QWPw(2,$rp));	&FR($o2);
-	 &sub($count,4,$count);	# count-=4
-	&st($o3,&QWPw(3,$rp));	&FR($o3);
-	 &add($ap,4*$QWS,$ap);	# count+=4
-	&add($bp,4*$QWS,$bp);	# count+=4
-	 &add($rp,4*$QWS,$rp);	# count+=4
-
-	&blt($count,&label("finish"));
-	&ld($a0,&QWPw(0,$ap));
-	 &ld($b0,&QWPw(0,$bp));
-	&br(&label("loop"));
-##################################################
-	# Do the last 0..3 words
-
-	&set_label("last_loop");
-
-	&ld($a0,&QWPw(0,$ap));	# get a
-	 &ld($b0,&QWPw(0,$bp));	# get b
-	&cmpult($a0,$b0,$tmp);	# will we borrow?
-	&sub($a0,$b0,$a0);	# do the subtract
-	&cmpult($a0,$cc,$b0);	# will we borrow?
-	&sub($a0,$cc,$a0);	# will we borrow?
-	&st($a0,&QWPw(0,$rp));	# save
-	&add($b0,$tmp,$cc);	# add the borrows
-
-	&add($ap,$QWS,$ap);
-	&add($bp,$QWS,$bp);
-	&add($rp,$QWS,$rp);
-	&sub($count,1,$count);
-	&bgt($count,&label("last_loop"));
-	&function_end_A($name);
-
-######################################################
-	&set_label("finish");
-	&add($count,4,$count);
-	&bgt($count,&label("last_loop"));
-
-	&FR($a0,$b0);
-	&set_label("end");
-	&function_end($name);
-
-	&fin_pool;
-	}
-
-1;
diff --git a/crypto/openssl/crypto/bn/asm/alpha/add.pl b/crypto/openssl/crypto/bn/asm/alpha/add.pl
deleted file mode 100644
index 13bf51642816..000000000000
--- a/crypto/openssl/crypto/bn/asm/alpha/add.pl
+++ /dev/null
@@ -1,118 +0,0 @@
-#!/usr/local/bin/perl
-# alpha assember 
-
-sub bn_add_words
-	{
-	local($name)=@_;
-	local($cc,$a,$b,$r);
-
-	&init_pool(4);
-	($cc)=GR("r0");
-
-	$rp=&wparam(0);
-	$ap=&wparam(1);
-	$bp=&wparam(2);
-	$count=&wparam(3);
-
-	&function_begin($name,"");
-
-	&comment("");
-	&sub($count,4,$count);
-	 &mov("zero",$cc);
-	&blt($count,&label("finish"));
-
-	($a0,$b0)=&NR(2);
-
-##########################################################
-	&set_label("loop");
-
-	&ld(($a0)=&NR(1),&QWPw(0,$ap));
-	 &ld(($b0)=&NR(1),&QWPw(0,$bp));
-	&ld(($a1)=&NR(1),&QWPw(1,$ap));
-	 &ld(($b1)=&NR(1),&QWPw(1,$bp));
-
-	($o0,$t0)=&NR(2);
-	&add($a0,$b0,$o0); 
-	 &ld(($a2)=&NR(1),&QWPw(2,$ap));
-	&cmpult($o0,$b0,$t0);
-	 &add($o0,$cc,$o0);
-	&cmpult($o0,$cc,$cc);
-	 &ld(($b2)=&NR(1),&QWPw(2,$bp));
-	&add($cc,$t0,$cc);	&FR($t0);
-
-	($t1,$o1)=&NR(2);
-
-	 &add($a1,$b1,$o1);	&FR($a1);
-	&cmpult($o1,$b1,$t1);	&FR($b1);
-	 &add($o1,$cc,$o1);
-	&cmpult($o1,$cc,$cc);
-	 &ld(($a3)=&NR(1),&QWPw(3,$ap));
-	&add($cc,$t1,$cc);	&FR($t1);
-
-	($t2,$o2)=&NR(2);
-
-	 &add($a2,$b2,$o2);	&FR($a2);
-	&cmpult($o2,$b2,$t2);	&FR($b2);
-	 &add($o2,$cc,$o2);
-	&cmpult($o2,$cc,$cc);
-	 &ld(($b3)=&NR(1),&QWPw(3,$bp));
-	&st($o0,&QWPw(0,$rp)); &FR($o0);
-	 &add($cc,$t2,$cc);	&FR($t2);
-
-	($t3,$o3)=&NR(2);
-
-	&st($o1,&QWPw(0,$rp)); &FR($o1);
-	 &add($a3,$b3,$o3);	&FR($a3);
-	&cmpult($o3,$b3,$t3);	&FR($b3);
-	 &add($o3,$cc,$o3);
-	&st($o2,&QWPw(0,$rp)); &FR($o2);
-	 &cmpult($o3,$cc,$cc);
-	&st($o3,&QWPw(0,$rp)); &FR($o3);
-	 &add($cc,$t3,$cc);	&FR($t3);
-
-
-	&sub($count,4,$count);	# count-=4
-	 &add($ap,4*$QWS,$ap);	# count+=4
-	&add($bp,4*$QWS,$bp);	# count+=4
-	 &add($rp,4*$QWS,$rp);	# count+=4
-
-	###
-	 &bge($count,&label("loop"));
-	###
-	&br(&label("finish"));
-##################################################
-	# Do the last 0..3 words
-
-	($t0,$o0)=&NR(2);
-	&set_label("last_loop");
-
-	&ld($a0,&QWPw(0,$ap));	# get a
-	 &ld($b0,&QWPw(0,$bp));	# get b
-	&add($ap,$QWS,$ap);
-	 &add($bp,$QWS,$bp);
-	&add($a0,$b0,$o0); 
-	 &sub($count,1,$count);
-	&cmpult($o0,$b0,$t0);	# will we borrow?
-	 &add($o0,$cc,$o0);	# will we borrow?
-	&cmpult($o0,$cc,$cc);	# will we borrow?
-	 &add($rp,$QWS,$rp);
-	&st($o0,&QWPw(-1,$rp));	# save
-	 &add($cc,$t0,$cc);	# add the borrows
-
-	###
-	 &bgt($count,&label("last_loop"));
-	&function_end_A($name);
-
-######################################################
-	&set_label("finish");
-	&add($count,4,$count);
-	 &bgt($count,&label("last_loop"));
-
-	&FR($o0,$t0,$a0,$b0);
-	&set_label("end");
-	&function_end($name);
-
-	&fin_pool;
-	}
-
-1;
diff --git a/crypto/openssl/crypto/bn/asm/alpha/div.pl b/crypto/openssl/crypto/bn/asm/alpha/div.pl
deleted file mode 100644
index e9e680897aae..000000000000
--- a/crypto/openssl/crypto/bn/asm/alpha/div.pl
+++ /dev/null
@@ -1,144 +0,0 @@
-#!/usr/local/bin/perl
-
-sub bn_div_words
-	{
-	local($data)=<<'EOF';
- #
- # What follows was taken directly from the C compiler with a few
- # hacks to redo the lables.
- #
-.text
-        .set noreorder
-	.set volatile
-	.align 3
-	.globl bn_div_words
-	.ent bn_div_words
-bn_div_words
-	ldgp $29,0($27)
-bn_div_words.ng:
-	lda $30,-48($30)
-	.frame $30,48,$26,0
-	stq $26,0($30)
-	stq $9,8($30)
-	stq $10,16($30)
-	stq $11,24($30)
-	stq $12,32($30)
-	stq $13,40($30)
-	.mask 0x4003e00,-48
-	.prologue 1
-	bis $16,$16,$9
-	bis $17,$17,$10
-	bis $18,$18,$11
-	bis $31,$31,$13
-	bis $31,2,$12
-	bne $11,$9119
-	lda $0,-1
-	br $31,$9136
-	.align 4
-$9119:
-	bis $11,$11,$16
-	jsr $26,BN_num_bits_word
-	ldgp $29,0($26)
-	subq $0,64,$1
-	beq $1,$9120
-	bis $31,1,$1
-	sll $1,$0,$1
-	cmpule $9,$1,$1
-	bne $1,$9120
- #	lda $16,_IO_stderr_
- #	lda $17,$C32
- #	bis $0,$0,$18
- #	jsr $26,fprintf
- #	ldgp $29,0($26)
-	jsr $26,abort
-	ldgp $29,0($26)
-	.align 4
-$9120:
-	bis $31,64,$3
-	cmpult $9,$11,$2
-	subq $3,$0,$1
-	addl $1,$31,$0
-	subq $9,$11,$1
-	cmoveq $2,$1,$9
-	beq $0,$9122
-	zapnot $0,15,$2
-	subq $3,$0,$1
-	sll $11,$2,$11
-	sll $9,$2,$3
-	srl $10,$1,$1
-	sll $10,$2,$10
-	bis $3,$1,$9
-$9122:
-	srl $11,32,$5
-	zapnot $11,15,$6
-	lda $7,-1
-	.align 5
-$9123:
-	srl $9,32,$1
-	subq $1,$5,$1
-	bne $1,$9126
-	zapnot $7,15,$27
-	br $31,$9127
-	.align 4
-$9126:
-	bis $9,$9,$24
-	bis $5,$5,$25
-	divqu $24,$25,$27
-$9127:
-	srl $10,32,$4
-	.align 5
-$9128:
-	mulq $27,$5,$1
-	subq $9,$1,$3
-	zapnot $3,240,$1
-	bne $1,$9129
-	mulq $6,$27,$2
-	sll $3,32,$1
-	addq $1,$4,$1
-	cmpule $2,$1,$2
-	bne $2,$9129
-	subq $27,1,$27
-	br $31,$9128
-	.align 4
-$9129:
-	mulq $27,$6,$1
-	mulq $27,$5,$4
-	srl $1,32,$3
-	sll $1,32,$1
-	addq $4,$3,$4
-	cmpult $10,$1,$2
-	subq $10,$1,$10
-	addq $2,$4,$2
-	cmpult $9,$2,$1
-	bis $2,$2,$4
-	beq $1,$9134
-	addq $9,$11,$9
-	subq $27,1,$27
-$9134:
-	subl $12,1,$12
-	subq $9,$4,$9
-	beq $12,$9124
-	sll $27,32,$13
-	sll $9,32,$2
-	srl $10,32,$1
-	sll $10,32,$10
-	bis $2,$1,$9
-	br $31,$9123
-	.align 4
-$9124:
-	bis $13,$27,$0
-$9136:
-	ldq $26,0($30)
-	ldq $9,8($30)
-	ldq $10,16($30)
-	ldq $11,24($30)
-	ldq $12,32($30)
-	ldq $13,40($30)
-	addq $30,48,$30
-	ret $31,($26),1
-	.end bn_div_words
-EOF
-	&asm_add($data);
-	}
-
-1;
diff --git a/crypto/openssl/crypto/bn/asm/alpha/mul.pl b/crypto/openssl/crypto/bn/asm/alpha/mul.pl
deleted file mode 100644
index 76c926566c7f..000000000000
--- a/crypto/openssl/crypto/bn/asm/alpha/mul.pl
+++ /dev/null
@@ -1,104 +0,0 @@
-#!/usr/local/bin/perl
-# alpha assember 
-
-sub bn_mul_words
-	{
-	local($name)=@_;
-	local($cc,$a,$b,$r,$couny);
-
-	&init_pool(4);
-	($cc)=GR("r0");
-
-	$rp=&wparam(0);
-	$ap=&wparam(1);
-	$count=&wparam(2);
-	$word=&wparam(3);
-
-	&function_begin($name,"");
-
-	&comment("");
-	&sub($count,4,$count);
-	 &mov("zero",$cc);
-	###
-	 &blt($count,&label("finish"));
-
-	($a0)=&NR(1); &ld($a0,&QWPw(0,$ap));
-
-	&set_label("loop");
-
-	($a1)=&NR(1); &ld($a1,&QWPw(1,$ap));
-	 ($a2)=&NR(1); &ld($a2,&QWPw(2,$ap));
-
-	&muh($a0,$word,($h0)=&NR(1));	&FR($a0);
-	 ($a3)=&NR(1); &ld($a3,&QWPw(3,$ap));
-	 						### wait 8
-	&mul($a0,$word,($l0)=&NR(1));	&FR($a0);
-	 						### wait 8
-	&muh($a1,$word,($h1)=&NR(1));	&FR($a1);
-	 &add($l0,$cc,$l0);				### wait 8
-	&mul($a1,$word,($l1)=&NR(1));	&FR($a1);
-	 &cmpult($l0,$cc,$cc);				### wait 8
-	&muh($a2,$word,($h2)=&NR(1));	&FR($a2);
-	 &add($h0,$cc,$cc);	&FR($h0); 		### wait 8
-	&mul($a2,$word,($l2)=&NR(1));	&FR($a2);
-	 &add($l1,$cc,$l1);				### wait 8
-	&st($l0,&QWPw(0,$rp));		&FR($l0);
-	 &cmpult($l1,$cc,$cc);				### wait 8
-	&muh($a3,$word,($h3)=&NR(1));	&FR($a3);
-	 &add($h1,$cc,$cc);		&FR($h1);
-	&mul($a3,$word,($l3)=&NR(1));	&FR($a3);
-	 &add($l2,$cc,$l2);
-	&st($l1,&QWPw(1,$rp));		&FR($l1);
-	 &cmpult($l2,$cc,$cc);
-	&add($h2,$cc,$cc);		&FR($h2);
-	 &sub($count,4,$count);	# count-=4
-	&st($l2,&QWPw(2,$rp));		&FR($l2);
-	 &add($l3,$cc,$l3);
-	&cmpult($l3,$cc,$cc);
-	 &add($bp,4*$QWS,$bp);	# count+=4
-	&add($h3,$cc,$cc);		&FR($h3);
-	 &add($ap,4*$QWS,$ap);	# count+=4
-	&st($l3,&QWPw(3,$rp));		&FR($l3);
-	 &add($rp,4*$QWS,$rp);	# count+=4
-	###
-	 &blt($count,&label("finish"));
-	 ($a0)=&NR(1); &ld($a0,&QWPw(0,$ap));
-	&br(&label("finish"));
-##################################################
-
-##################################################
-	# Do the last 0..3 words
-
-	&set_label("last_loop");
-
-	&ld(($a0)=&NR(1),&QWPw(0,$ap));	# get a
-	 ###
-	###
-	 ###
-	&muh($a0,$word,($h0)=&NR(1));
-	 ### Wait 8 for next mul issue
-	&mul($a0,$word,($l0)=&NR(1)); &FR($a0)
-	 &add($ap,$QWS,$ap);
-	### Loose 12 until result is available
-	&add($rp,$QWS,$rp);
-	 &sub($count,1,$count);
-	&add($l0,$cc,$l0);
-	 ###
-	&st($l0,&QWPw(-1,$rp));		&FR($l0);
-	 &cmpult($l0,$cc,$cc);
-	&add($h0,$cc,$cc);		&FR($h0);
-	 &bgt($count,&label("last_loop"));
-	&function_end_A($name);
-
-######################################################
-	&set_label("finish");
-	&add($count,4,$count);
-	&bgt($count,&label("last_loop"));
-
-	&set_label("end");
-	&function_end($name);
-
-	&fin_pool;
-	}
-
-1;
diff --git a/crypto/openssl/crypto/bn/asm/alpha/mul_add.pl b/crypto/openssl/crypto/bn/asm/alpha/mul_add.pl
deleted file mode 100644
index 0d6df69bc4b0..000000000000
--- a/crypto/openssl/crypto/bn/asm/alpha/mul_add.pl
+++ /dev/null
@@ -1,123 +0,0 @@
-#!/usr/local/bin/perl
-# alpha assember 
-
-sub bn_mul_add_words
-	{
-	local($name)=@_;
-	local($cc,$a,$b,$r,$couny);
-
-	&init_pool(4);
-	($cc)=GR("r0");
-
-	$rp=&wparam(0);
-	$ap=&wparam(1);
-	$count=&wparam(2);
-	$word=&wparam(3);
-
-	&function_begin($name,"");
-
-	&comment("");
-	&sub($count,4,$count);
-	 &mov("zero",$cc);
-	###
-	 &blt($count,&label("finish"));
-
-	&ld(($a0)=&NR(1),&QWPw(0,$ap));
-
-$a=<<'EOF';
-##########################################################
-	&set_label("loop");
-
-	&ld(($r0)=&NR(1),&QWPw(0,$rp));
-	 &ld(($a1)=&NR(1),&QWPw(1,$ap));
-	&muh($a0,$word,($h0)=&NR(1));
-	 &ld(($r1)=&NR(1),&QWPw(1,$rp));
-	&ld(($a2)=&NR(1),&QWPw(2,$ap));
-	 ###
-	&mul($a0,$word,($l0)=&NR(1));	&FR($a0);
-	 &ld(($r2)=&NR(1),&QWPw(2,$rp));
-	&muh($a1,$word,($h1)=&NR(1));
-	 &ld(($a3)=&NR(1),&QWPw(3,$ap));
-	&mul($a1,$word,($l1)=&NR(1));	&FR($a1);
-	 &ld(($r3)=&NR(1),&QWPw(3,$rp));
-	&add($r0,$l0,$r0);
-	 &add($r1,$l1,$r1);
-	&cmpult($r0,$l0,($t0)=&NR(1));	&FR($l0);
-	 &cmpult($r1,$l1,($t1)=&NR(1));	&FR($l1);
-	&muh($a2,$word,($h2)=&NR(1));
-	 &add($r0,$cc,$r0);
-	&add($h0,$t0,$h0);		&FR($t0);
-	 &cmpult($r0,$cc,$cc);
-	&add($h1,$t1,$h1);		&FR($t1);
-	 &add($h0,$cc,$cc);		&FR($h0);
-	&mul($a2,$word,($l2)=&NR(1));	&FR($a2);
-	 &add($r1,$cc,$r1);
-	&cmpult($r1,$cc,$cc);
-	 &add($r2,$l2,$r2);
-	&add($h1,$cc,$cc);		&FR($h1);
-	 &cmpult($r2,$l2,($t2)=&NR(1));	&FR($l2);
-	&muh($a3,$word,($h3)=&NR(1));
-	 &add($r2,$cc,$r2);
-	&st($r0,&QWPw(0,$rp)); &FR($r0);
-	 &add($h2,$t2,$h2);		&FR($t2);
-	&st($r1,&QWPw(1,$rp)); &FR($r1);
-	 &cmpult($r2,$cc,$cc);
-	&mul($a3,$word,($l3)=&NR(1));	&FR($a3);
-	 &add($h2,$cc,$cc);		&FR($h2);
-	&st($r2,&QWPw(2,$rp)); &FR($r2);
-	 &sub($count,4,$count);	# count-=4
-	 &add($rp,4*$QWS,$rp);	# count+=4
-	&add($r3,$l3,$r3);
-	 &add($ap,4*$QWS,$ap);	# count+=4
-	&cmpult($r3,$l3,($t3)=&NR(1));	&FR($l3);
-	 &add($r3,$cc,$r3);
-	&add($h3,$t3,$h3);		&FR($t3);
-	 &cmpult($r3,$cc,$cc);
-	&st($r3,&QWPw(-1,$rp)); &FR($r3);
-	 &add($h3,$cc,$cc);		&FR($h3);
-
-	###
-	 &blt($count,&label("finish"));
-	&ld(($a0)=&NR(1),&QWPw(0,$ap));
-	 &br(&label("loop"));
-EOF
-##################################################
-	# Do the last 0..3 words
-
-	&set_label("last_loop");
-
-	&ld(($a0)=&NR(1),&QWPw(0,$ap));	# get a
-	 &ld(($r0)=&NR(1),&QWPw(0,$rp));	# get b
-	###
-	 ###
-	&muh($a0,$word,($h0)=&NR(1));	&FR($a0);
-	 ### wait 8
-	&mul($a0,$word,($l0)=&NR(1));	&FR($a0);
-	 &add($rp,$QWS,$rp);
-	&add($ap,$QWS,$ap);
-	 &sub($count,1,$count);
-	### wait 3 until l0 is available
-	&add($r0,$l0,$r0);
-	 ###
-	&cmpult($r0,$l0,($t0)=&NR(1));	&FR($l0);
-	 &add($r0,$cc,$r0);
-	&add($h0,$t0,$h0);		&FR($t0);
-	 &cmpult($r0,$cc,$cc);
-	&add($h0,$cc,$cc);		&FR($h0);
-
-	&st($r0,&QWPw(-1,$rp));		&FR($r0);
-	 &bgt($count,&label("last_loop"));
-	&function_end_A($name);
-
-######################################################
-	&set_label("finish");
-	&add($count,4,$count);
-	 &bgt($count,&label("last_loop"));
-
-	&set_label("end");
-	&function_end($name);
-
-	&fin_pool;
-	}
-
-1;
diff --git a/crypto/openssl/crypto/bn/asm/alpha/mul_c4.pl b/crypto/openssl/crypto/bn/asm/alpha/mul_c4.pl
deleted file mode 100644
index 9cc876ded4ae..000000000000
--- a/crypto/openssl/crypto/bn/asm/alpha/mul_c4.pl
+++ /dev/null
@@ -1,215 +0,0 @@
-#!/usr/local/bin/perl
-# alpha assember 
-
-# upto
-
-sub mul_add_c
-	{
-	local($a,$b,$c0,$c1,$c2)=@_;
-	local($l1,$h1,$t1,$t2);
-
-	&mul($a,$b,($l1)=&NR(1));
-	&muh($a,$b,($h1)=&NR(1));
-	&add($c0,$l1,$c0);
-	&cmpult($c0,$l1,($t1)=&NR(1));	&FR($l1);
-	&add($t1,$h1,$h1);		&FR($t1);
-	&add($c1,$h1,$c1);
-	&cmpult($c1,$h1,($t2)=&NR(1));	&FR($h1);
-	&add($c2,$t2,$c2);		&FR($t2);
-	}
-
-sub bn_mul_comba4
-	{
-	local($name)=@_;
-	local(@a,@b,$r,$c0,$c1,$c2);
-
-	$cnt=1;
-	&init_pool(3);
-
-	$rp=&wparam(0);
-	$ap=&wparam(1);
-	$bp=&wparam(2);
-
-	&function_begin($name,"");
-
-	&comment("");
-
-	&ld(($a[0])=&NR(1),&QWPw(0,$ap));
-	&ld(($b[0])=&NR(1),&QWPw(0,$bp));
-	&ld(($a[1])=&NR(1),&QWPw(1,$ap));
-	&ld(($b[1])=&NR(1),&QWPw(1,$bp));
-	&mul($a[0],$b[0],($r00)=&NR(1));
-	&ld(($a[2])=&NR(1),&QWPw(2,$ap));
-	&ld(($b[2])=&NR(1),&QWPw(2,$bp));
-	&muh($a[0],$b[0],($r01)=&NR(1));
-	&FR($ap); &ld(($a[3])=&NR(1),&QWPw(3,$ap));
-	&FR($bp); &ld(($b[3])=&NR(1),&QWPw(3,$bp));
-	&mul($a[0],$b[1],($r02)=&NR(1));
-
-	($R,$H1,$H2)=&NR(3);
-
-	&st($r00,&QWPw(0,$rp));	&FR($r00);
-
-	&mov("zero",$R);
-	&mul($a[1],$b[0],($r03)=&NR(1));
-
-	&mov("zero",$H1);
-	&mov("zero",$H0);
-	 &add($R,$r01,$R);
-	&muh($a[0],$b[1],($r04)=&NR(1));
-	 &cmpult($R,$r01,($t01)=&NR(1));	&FR($r01);
-	 &add($R,$r02,$R);
-	 &add($H1,$t01,$H1)			&FR($t01);
-	&muh($a[1],$b[0],($r05)=&NR(1));
-	 &cmpult($R,$r02,($t02)=&NR(1));	&FR($r02);
-	 &add($R,$r03,$R);
-	 &add($H2,$t02,$H2)			&FR($t02);
-	&mul($a[0],$b[2],($r06)=&NR(1));
-	 &cmpult($R,$r03,($t03)=&NR(1));	&FR($r03);
-	 &add($H1,$t03,$H1)			&FR($t03);
-	&st($R,&QWPw(1,$rp));
-	&add($H1,$H2,$R);
-
-	&mov("zero",$H1);
-	 &add($R,$r04,$R);
-	&mov("zero",$H2);
-	&mul($a[1],$b[1],($r07)=&NR(1));
-	 &cmpult($R,$r04,($t04)=&NR(1));	&FR($r04);
-	 &add($R,$r05,$R);
-	 &add($H1,$t04,$H1)			&FR($t04);
-	&mul($a[2],$b[0],($r08)=&NR(1));
-	 &cmpult($R,$r05,($t05)=&NR(1));	&FR($r05);
-	 &add($R,$r01,$R);
-	 &add($H2,$t05,$H2)			&FR($t05);
-	&muh($a[0],$b[2],($r09)=&NR(1));
-	 &cmpult($R,$r06,($t06)=&NR(1));	&FR($r06);
-	 &add($R,$r07,$R);
-	 &add($H1,$t06,$H1)			&FR($t06);
-	&muh($a[1],$b[1],($r10)=&NR(1));
-	 &cmpult($R,$r07,($t07)=&NR(1));	&FR($r07);
-	 &add($R,$r08,$R);
-	 &add($H2,$t07,$H2)			&FR($t07);
-	&muh($a[2],$b[0],($r11)=&NR(1));
-	 &cmpult($R,$r08,($t08)=&NR(1));	&FR($r08);
-	 &add($H1,$t08,$H1)			&FR($t08);
-	&st($R,&QWPw(2,$rp));
-	&add($H1,$H2,$R);
-
-	&mov("zero",$H1);
-	 &add($R,$r09,$R);
-	&mov("zero",$H2);
-	&mul($a[0],$b[3],($r12)=&NR(1));
-	 &cmpult($R,$r09,($t09)=&NR(1));	&FR($r09);
-	 &add($R,$r10,$R);
-	 &add($H1,$t09,$H1)			&FR($t09);
-	&mul($a[1],$b[2],($r13)=&NR(1));
-	 &cmpult($R,$r10,($t10)=&NR(1));	&FR($r10);
-	 &add($R,$r11,$R);
-	 &add($H1,$t10,$H1)			&FR($t10);
-	&mul($a[2],$b[1],($r14)=&NR(1));
-	 &cmpult($R,$r11,($t11)=&NR(1));	&FR($r11);
-	 &add($R,$r12,$R);
-	 &add($H1,$t11,$H1)			&FR($t11);
-	&mul($a[3],$b[0],($r15)=&NR(1));
-	 &cmpult($R,$r12,($t12)=&NR(1));	&FR($r12);
-	 &add($R,$r13,$R);
-	 &add($H1,$t12,$H1)			&FR($t12);
-	&muh($a[0],$b[3],($r16)=&NR(1));
-	 &cmpult($R,$r13,($t13)=&NR(1));	&FR($r13);
-	 &add($R,$r14,$R);
-	 &add($H1,$t13,$H1)			&FR($t13);
-	&muh($a[1],$b[2],($r17)=&NR(1));
-	 &cmpult($R,$r14,($t14)=&NR(1));	&FR($r14);
-	 &add($R,$r15,$R);
-	 &add($H1,$t14,$H1)			&FR($t14);
-	&muh($a[2],$b[1],($r18)=&NR(1));
-	 &cmpult($R,$r15,($t15)=&NR(1));	&FR($r15);
-	 &add($H1,$t15,$H1)			&FR($t15);
-	&st($R,&QWPw(3,$rp));
-	&add($H1,$H2,$R);
-
-	&mov("zero",$H1);
-	 &add($R,$r16,$R);
-	&mov("zero",$H2);
-	&muh($a[3],$b[0],($r19)=&NR(1));
-	 &cmpult($R,$r16,($t16)=&NR(1));	&FR($r16);
-	 &add($R,$r17,$R);
-	 &add($H1,$t16,$H1)			&FR($t16);
-	&mul($a[1],$b[3],($r20)=&NR(1));
-	 &cmpult($R,$r17,($t17)=&NR(1));	&FR($r17);
-	 &add($R,$r18,$R);
-	 &add($H1,$t17,$H1)			&FR($t17);
-	&mul($a[2],$b[2],($r21)=&NR(1));
-	 &cmpult($R,$r18,($t18)=&NR(1));	&FR($r18);
-	 &add($R,$r19,$R);
-	 &add($H1,$t18,$H1)			&FR($t18);
-	&mul($a[3],$b[1],($r22)=&NR(1));
-	 &cmpult($R,$r19,($t19)=&NR(1));	&FR($r19);
-	 &add($R,$r20,$R);
-	 &add($H1,$t19,$H1)			&FR($t19);
-	&muh($a[1],$b[3],($r23)=&NR(1));
-	 &cmpult($R,$r20,($t20)=&NR(1));	&FR($r20);
-	 &add($R,$r21,$R);
-	 &add($H1,$t20,$H1)			&FR($t20);
-	&muh($a[2],$b[2],($r24)=&NR(1));
-	 &cmpult($R,$r21,($t21)=&NR(1));	&FR($r21);
-	 &add($R,$r22,$R);
-	 &add($H1,$t21,$H1)			&FR($t21);
-	&muh($a[3],$b[1],($r25)=&NR(1));
-	 &cmpult($R,$r22,($t22)=&NR(1));	&FR($r22);
-	 &add($H1,$t22,$H1)			&FR($t22);
-	&st($R,&QWPw(4,$rp));
-	&add($H1,$H2,$R);
-
-	&mov("zero",$H1);
-	 &add($R,$r23,$R);
-	&mov("zero",$H2);
-	&mul($a[2],$b[3],($r26)=&NR(1));
-	 &cmpult($R,$r23,($t23)=&NR(1));	&FR($r23);
-	 &add($R,$r24,$R);
-	 &add($H1,$t23,$H1)			&FR($t23);
-	&mul($a[3],$b[2],($r27)=&NR(1));
-	 &cmpult($R,$r24,($t24)=&NR(1));	&FR($r24);
-	 &add($R,$r25,$R);
-	 &add($H1,$t24,$H1)			&FR($t24);
-	&muh($a[2],$b[3],($r28)=&NR(1));
-	 &cmpult($R,$r25,($t25)=&NR(1));	&FR($r25);
-	 &add($R,$r26,$R);
-	 &add($H1,$t25,$H1)			&FR($t25);
-	&muh($a[3],$b[2],($r29)=&NR(1));
-	 &cmpult($R,$r26,($t26)=&NR(1));	&FR($r26);
-	 &add($R,$r27,$R);
-	 &add($H1,$t26,$H1)			&FR($t26);
-	&mul($a[3],$b[3],($r30)=&NR(1));
-	 &cmpult($R,$r27,($t27)=&NR(1));	&FR($r27);
-	 &add($H1,$t27,$H1)			&FR($t27);
-	&st($R,&QWPw(5,$rp));
-	&add($H1,$H2,$R);
-
-	&mov("zero",$H1);
-	 &add($R,$r28,$R);
-	&mov("zero",$H2);
-	&muh($a[3],$b[3],($r31)=&NR(1));
-	 &cmpult($R,$r28,($t28)=&NR(1));	&FR($r28);
-	 &add($R,$r29,$R);
-	 &add($H1,$t28,$H1)			&FR($t28);
-	############
-	 &cmpult($R,$r29,($t29)=&NR(1));	&FR($r29);
-	 &add($R,$r30,$R);
-	 &add($H1,$t29,$H1)			&FR($t29);
-        ############
-	 &cmpult($R,$r30,($t30)=&NR(1));	&FR($r30);
-	 &add($H1,$t30,$H1)			&FR($t30);
-	&st($R,&QWPw(6,$rp));
-	&add($H1,$H2,$R);
-
-	 &add($R,$r31,$R);			&FR($r31);
-	&st($R,&QWPw(7,$rp));
-
-	&FR($R,$H1,$H2);
-	&function_end($name);
-
-	&fin_pool;
-	}
-
-1;
diff --git a/crypto/openssl/crypto/bn/asm/alpha/mul_c4.works.pl b/crypto/openssl/crypto/bn/asm/alpha/mul_c4.works.pl
deleted file mode 100644
index 79d86dd25cd1..000000000000
--- a/crypto/openssl/crypto/bn/asm/alpha/mul_c4.works.pl
+++ /dev/null
@@ -1,98 +0,0 @@
-#!/usr/local/bin/perl
-# alpha assember 
-
-sub mul_add_c
-	{
-	local($a,$b,$c0,$c1,$c2)=@_;
-	local($l1,$h1,$t1,$t2);
-
-print STDERR "count=$cnt\n"; $cnt++;
-	&mul($a,$b,($l1)=&NR(1));
-	&muh($a,$b,($h1)=&NR(1));
-	&add($c0,$l1,$c0);
-	&cmpult($c0,$l1,($t1)=&NR(1));	&FR($l1);
-	&add($t1,$h1,$h1);		&FR($t1);
-	&add($c1,$h1,$c1);
-	&cmpult($c1,$h1,($t2)=&NR(1));	&FR($h1);
-	&add($c2,$t2,$c2);		&FR($t2);
-	}
-
-sub bn_mul_comba4
-	{
-	local($name)=@_;
-	local(@a,@b,$r,$c0,$c1,$c2);
-
-	$cnt=1;
-	&init_pool(3);
-
-	$rp=&wparam(0);
-	$ap=&wparam(1);
-	$bp=&wparam(2);
-
-	&function_begin($name,"");
-
-	&comment("");
-
-	&ld(($a[0])=&NR(1),&QWPw(0,$ap));
-	&ld(($b[0])=&NR(1),&QWPw(0,$bp));
-	&ld(($a[1])=&NR(1),&QWPw(1,$ap));
-	&ld(($b[1])=&NR(1),&QWPw(1,$bp));
-	&ld(($a[2])=&NR(1),&QWPw(2,$ap));
-	&ld(($b[2])=&NR(1),&QWPw(2,$bp));
-	&ld(($a[3])=&NR(1),&QWPw(3,$ap));	&FR($ap);
-	&ld(($b[3])=&NR(1),&QWPw(3,$bp));	&FR($bp);
-
-	($c0,$c1,$c2)=&NR(3);
-	&mov("zero",$c2);
-	&mul($a[0],$b[0],$c0);
-	&muh($a[0],$b[0],$c1);
-	&st($c0,&QWPw(0,$rp));			&FR($c0); ($c0)=&NR($c0);
-	($c0,$c1,$c2)=($c1,$c2,$c0);
-	&mov("zero",$c2);
-
-	&mul_add_c($a[0],$b[1],$c0,$c1,$c2);
-	&mul_add_c($a[1],$b[0],$c0,$c1,$c2);
-	&st($c0,&QWPw(1,$rp));			&FR($c0); ($c0)=&NR($c0);
-	($c0,$c1,$c2)=($c1,$c2,$c0);
-	&mov("zero",$c2);
-
-	&mul_add_c($a[1],$b[1],$c0,$c1,$c2);
-	&mul_add_c($a[0],$b[2],$c0,$c1,$c2);
-	&mul_add_c($a[2],$b[0],$c0,$c1,$c2);
-	&st($c0,&QWPw(2,$rp));			&FR($c0); ($c0)=&NR($c0);
-	($c0,$c1,$c2)=($c1,$c2,$c0);
-	&mov("zero",$c2);
-
-	&mul_add_c($a[0],$b[3],$c0,$c1,$c2);	&FR($a[0]);
-	&mul_add_c($a[1],$b[2],$c0,$c1,$c2);
-	&mul_add_c($a[2],$b[1],$c0,$c1,$c2);
-	&mul_add_c($a[3],$b[0],$c0,$c1,$c2);	&FR($b[0]);
-	&st($c0,&QWPw(3,$rp));			&FR($c0); ($c0)=&NR($c0);
-	($c0,$c1,$c2)=($c1,$c2,$c0);
-	&mov("zero",$c2);
-
-	&mul_add_c($a[1],$b[3],$c0,$c1,$c2);	&FR($a[1]);
-	&mul_add_c($a[2],$b[2],$c0,$c1,$c2);
-	&mul_add_c($a[3],$b[1],$c0,$c1,$c2);	&FR($b[1]);
-	&st($c0,&QWPw(4,$rp));			&FR($c0); ($c0)=&NR($c0);
-	($c0,$c1,$c2)=($c1,$c2,$c0);
-	&mov("zero",$c2);
-
-	&mul_add_c($a[2],$b[3],$c0,$c1,$c2);	&FR($a[2]);
-	&mul_add_c($a[3],$b[2],$c0,$c1,$c2);	&FR($b[2]);
-	&st($c0,&QWPw(5,$rp));			&FR($c0); ($c0)=&NR($c0);
-	($c0,$c1,$c2)=($c1,$c2,$c0);
-	&mov("zero",$c2);
-
-	&mul_add_c($a[3],$b[3],$c0,$c1,$c2);	&FR($a[3],$b[3]);
-	&st($c0,&QWPw(6,$rp));
-	&st($c1,&QWPw(7,$rp));
-
-	&FR($c0,$c1,$c2);
-
-	&function_end($name);
-
-	&fin_pool;
-	}
-
-1;
diff --git a/crypto/openssl/crypto/bn/asm/alpha/mul_c8.pl b/crypto/openssl/crypto/bn/asm/alpha/mul_c8.pl
deleted file mode 100644
index 525ca7494b73..000000000000
--- a/crypto/openssl/crypto/bn/asm/alpha/mul_c8.pl
+++ /dev/null
@@ -1,177 +0,0 @@
-#!/usr/local/bin/perl
-# alpha assember 
-
-sub bn_mul_comba8
-	{
-	local($name)=@_;
-	local(@a,@b,$r,$c0,$c1,$c2);
-
-	$cnt=1;
-	&init_pool(3);
-
-	$rp=&wparam(0);
-	$ap=&wparam(1);
-	$bp=&wparam(2);
-
-	&function_begin($name,"");
-
-	&comment("");
-
-	&stack_push(2);
-	&ld(($a[0])=&NR(1),&QWPw(0,$ap));
-	&ld(($b[0])=&NR(1),&QWPw(0,$bp));
-	&st($reg_s0,&swtmp(0)); &FR($reg_s0);
-	&st($reg_s1,&swtmp(1)); &FR($reg_s1);
-	&ld(($a[1])=&NR(1),&QWPw(1,$ap));
-	&ld(($b[1])=&NR(1),&QWPw(1,$bp));
-	&ld(($a[2])=&NR(1),&QWPw(2,$ap));
-	&ld(($b[2])=&NR(1),&QWPw(2,$bp));
-	&ld(($a[3])=&NR(1),&QWPw(3,$ap));
-	&ld(($b[3])=&NR(1),&QWPw(3,$bp));
-	&ld(($a[4])=&NR(1),&QWPw(1,$ap));
-	&ld(($b[4])=&NR(1),&QWPw(1,$bp));
-	&ld(($a[5])=&NR(1),&QWPw(1,$ap));
-	&ld(($b[5])=&NR(1),&QWPw(1,$bp));
-	&ld(($a[6])=&NR(1),&QWPw(1,$ap));
-	&ld(($b[6])=&NR(1),&QWPw(1,$bp));
-	&ld(($a[7])=&NR(1),&QWPw(1,$ap));	&FR($ap);
-	&ld(($b[7])=&NR(1),&QWPw(1,$bp));	&FR($bp);
-
-	($c0,$c1,$c2)=&NR(3);
-	&mov("zero",$c2);
-	&mul($a[0],$b[0],$c0);
-	&muh($a[0],$b[0],$c1);
-	&st($c0,&QWPw(0,$rp));			&FR($c0); ($c0)=&NR(1);
-	($c0,$c1,$c2)=($c1,$c2,$c0);
-	&mov("zero",$c2);
-
-	&mul_add_c($a[0],$b[1],$c0,$c1,$c2);
-	&mul_add_c($a[1],$b[0],$c0,$c1,$c2);
-	&st($c0,&QWPw(1,$rp));			&FR($c0); ($c0)=&NR(1);
-	($c0,$c1,$c2)=($c1,$c2,$c0);
-	&mov("zero",$c2);
-
-	&mul_add_c($a[0],$b[2],$c0,$c1,$c2);
-	&mul_add_c($a[1],$b[1],$c0,$c1,$c2);
-	&mul_add_c($a[2],$b[0],$c0,$c1,$c2);
-	&st($c0,&QWPw(2,$rp));			&FR($c0); ($c0)=&NR(1);
-	($c0,$c1,$c2)=($c1,$c2,$c0);
-	&mov("zero",$c2);
-
-	&mul_add_c($a[0],$b[3],$c0,$c1,$c2);
-	&mul_add_c($a[1],$b[2],$c0,$c1,$c2);
-	&mul_add_c($a[2],$b[1],$c0,$c1,$c2);
-	&mul_add_c($a[3],$b[0],$c0,$c1,$c2);
-	&st($c0,&QWPw(3,$rp));			&FR($c0); ($c0)=&NR(1);
-	($c0,$c1,$c2)=($c1,$c2,$c0);
-	&mov("zero",$c2);
-
-	&mul_add_c($a[0],$b[4],$c0,$c1,$c2);
-	&mul_add_c($a[1],$b[3],$c0,$c1,$c2);
-	&mul_add_c($a[2],$b[2],$c0,$c1,$c2);
-	&mul_add_c($a[3],$b[1],$c0,$c1,$c2);
-	&mul_add_c($a[4],$b[0],$c0,$c1,$c2);
-	&st($c0,&QWPw(4,$rp));			&FR($c0); ($c0)=&NR(1);
-	($c0,$c1,$c2)=($c1,$c2,$c0);
-	&mov("zero",$c2);
-
-	&mul_add_c($a[0],$b[5],$c0,$c1,$c2);
-	&mul_add_c($a[1],$b[4],$c0,$c1,$c2);
-	&mul_add_c($a[2],$b[3],$c0,$c1,$c2);
-	&mul_add_c($a[3],$b[2],$c0,$c1,$c2);
-	&mul_add_c($a[4],$b[1],$c0,$c1,$c2);
-	&mul_add_c($a[5],$b[0],$c0,$c1,$c2);
-	&st($c0,&QWPw(5,$rp));			&FR($c0); ($c0)=&NR(1);
-	($c0,$c1,$c2)=($c1,$c2,$c0);
-	&mov("zero",$c2);
-
-	&mul_add_c($a[0],$b[6],$c0,$c1,$c2);
-	&mul_add_c($a[1],$b[5],$c0,$c1,$c2);
-	&mul_add_c($a[2],$b[4],$c0,$c1,$c2);
-	&mul_add_c($a[3],$b[3],$c0,$c1,$c2);
-	&mul_add_c($a[4],$b[2],$c0,$c1,$c2);
-	&mul_add_c($a[5],$b[1],$c0,$c1,$c2);
-	&mul_add_c($a[6],$b[0],$c0,$c1,$c2);
-	&st($c0,&QWPw(6,$rp));			&FR($c0); ($c0)=&NR(1);
-	($c0,$c1,$c2)=($c1,$c2,$c0);
-	&mov("zero",$c2);
-
-	&mul_add_c($a[0],$b[7],$c0,$c1,$c2);	&FR($a[0]);
-	&mul_add_c($a[1],$b[6],$c0,$c1,$c2);
-	&mul_add_c($a[2],$b[5],$c0,$c1,$c2);
-	&mul_add_c($a[3],$b[4],$c0,$c1,$c2);
-	&mul_add_c($a[4],$b[3],$c0,$c1,$c2);
-	&mul_add_c($a[5],$b[2],$c0,$c1,$c2);
-	&mul_add_c($a[6],$b[1],$c0,$c1,$c2);
-	&mul_add_c($a[7],$b[0],$c0,$c1,$c2);	&FR($b[0]);
-	&st($c0,&QWPw(7,$rp));			&FR($c0); ($c0)=&NR(1);
-	($c0,$c1,$c2)=($c1,$c2,$c0);
-	&mov("zero",$c2);
-
-	&mul_add_c($a[1],$b[7],$c0,$c1,$c2);	&FR($a[1]);
-	&mul_add_c($a[2],$b[6],$c0,$c1,$c2);
-	&mul_add_c($a[3],$b[5],$c0,$c1,$c2);
-	&mul_add_c($a[4],$b[4],$c0,$c1,$c2);
-	&mul_add_c($a[5],$b[3],$c0,$c1,$c2);
-	&mul_add_c($a[6],$b[2],$c0,$c1,$c2);
-	&mul_add_c($a[7],$b[1],$c0,$c1,$c2);	&FR($b[1]);
-	&st($c0,&QWPw(8,$rp));			&FR($c0); ($c0)=&NR(1);
-	($c0,$c1,$c2)=($c1,$c2,$c0);
-	&mov("zero",$c2);
-
-	&mul_add_c($a[2],$b[7],$c0,$c1,$c2);	&FR($a[2]);
-	&mul_add_c($a[3],$b[6],$c0,$c1,$c2);
-	&mul_add_c($a[4],$b[5],$c0,$c1,$c2);
-	&mul_add_c($a[5],$b[4],$c0,$c1,$c2);
-	&mul_add_c($a[6],$b[3],$c0,$c1,$c2);
-	&mul_add_c($a[7],$b[2],$c0,$c1,$c2);	&FR($b[2]);
-	&st($c0,&QWPw(9,$rp));			&FR($c0); ($c0)=&NR(1);
-	($c0,$c1,$c2)=($c1,$c2,$c0);
-	&mov("zero",$c2);
-
-	&mul_add_c($a[3],$b[7],$c0,$c1,$c2);	&FR($a[3]);
-	&mul_add_c($a[4],$b[6],$c0,$c1,$c2);
-	&mul_add_c($a[5],$b[5],$c0,$c1,$c2);
-	&mul_add_c($a[6],$b[4],$c0,$c1,$c2);
-	&mul_add_c($a[7],$b[3],$c0,$c1,$c2);	&FR($b[3]);
-	&st($c0,&QWPw(10,$rp));			&FR($c0); ($c0)=&NR(1);
-	($c0,$c1,$c2)=($c1,$c2,$c0);
-	&mov("zero",$c2);
-
-	&mul_add_c($a[4],$b[7],$c0,$c1,$c2);	&FR($a[4]);
-	&mul_add_c($a[5],$b[6],$c0,$c1,$c2);
-	&mul_add_c($a[6],$b[5],$c0,$c1,$c2);
-	&mul_add_c($a[7],$b[4],$c0,$c1,$c2);	&FR($b[4]);
-	&st($c0,&QWPw(11,$rp));			&FR($c0); ($c0)=&NR(1);
-	($c0,$c1,$c2)=($c1,$c2,$c0);
-	&mov("zero",$c2);
-
-	&mul_add_c($a[5],$b[7],$c0,$c1,$c2);	&FR($a[5]);
-	&mul_add_c($a[6],$b[6],$c0,$c1,$c2);
-	&mul_add_c($a[7],$b[5],$c0,$c1,$c2);	&FR($b[5]);
-	&st($c0,&QWPw(12,$rp));			&FR($c0); ($c0)=&NR(1);
-	($c0,$c1,$c2)=($c1,$c2,$c0);
-	&mov("zero",$c2);
-
-	&mul_add_c($a[6],$b[7],$c0,$c1,$c2);	&FR($a[6]);
-	&mul_add_c($a[7],$b[6],$c0,$c1,$c2);	&FR($b[6]);
-	&st($c0,&QWPw(13,$rp));			&FR($c0); ($c0)=&NR(1);
-	($c0,$c1,$c2)=($c1,$c2,$c0);
-	&mov("zero",$c2);
-
-	&mul_add_c($a[7],$b[7],$c0,$c1,$c2);	&FR($a[7],$b[7]);
-	&st($c0,&QWPw(14,$rp));
-	&st($c1,&QWPw(15,$rp));
-
-	&FR($c0,$c1,$c2);
-
-	&ld($reg_s0,&swtmp(0));
-	&ld($reg_s1,&swtmp(1));
-	&stack_pop(2);
-
-	&function_end($name);
-
-	&fin_pool;
-	}
-
-1;
diff --git a/crypto/openssl/crypto/bn/asm/alpha/sqr.pl b/crypto/openssl/crypto/bn/asm/alpha/sqr.pl
deleted file mode 100644
index a55b696906e1..000000000000
--- a/crypto/openssl/crypto/bn/asm/alpha/sqr.pl
+++ /dev/null
@@ -1,113 +0,0 @@
-#!/usr/local/bin/perl
-# alpha assember 
-
-sub bn_sqr_words
-	{
-	local($name)=@_;
-	local($cc,$a,$b,$r,$couny);
-
-	&init_pool(3);
-	($cc)=GR("r0");
-
-	$rp=&wparam(0);
-	$ap=&wparam(1);
-	$count=&wparam(2);
-
-	&function_begin($name,"");
-
-	&comment("");
-	&sub($count,4,$count);
-	&mov("zero",$cc);
-	&br(&label("finish"));
-	&blt($count,&label("finish"));
-
-	($a0,$r0)=&NR(2);
-	&ld($a0,&QWPw(0,$ap));
-	&ld($r0,&QWPw(0,$rp));
-
-$a=<<'EOF';
-##########################################################
-	&set_label("loop");
-
-	($a1)=&NR(1); &ld($a1,&QWPw(1,$ap));
-	($b1)=&NR(1); &ld($b1,&QWPw(1,$bp));
-	($a2)=&NR(1); &ld($a2,&QWPw(2,$ap));
-	($b2)=&NR(1); &ld($b2,&QWPw(2,$bp));
-	($a3)=&NR(1); &ld($a3,&QWPw(3,$ap));
-	($b3)=&NR(1); &ld($b3,&QWPw(3,$bp));
-
-	($o0,$t0)=&NR(2);
-	&add($a0,$b0,$o0); 
-	&cmpult($o0,$b0,$t0);
-	&add($o0,$cc,$o0);
-	&cmpult($o0,$cc,$cc);
-	&add($cc,$t0,$cc);	&FR($t0);
-
-	($t1,$o1)=&NR(2);
-
-	&add($a1,$b1,$o1);	&FR($a1);
-	&cmpult($o1,$b1,$t1);	&FR($b1);
-	&add($o1,$cc,$o1);
-	&cmpult($o1,$cc,$cc);
-	&add($cc,$t1,$cc);	&FR($t1);
-
-	($t2,$o2)=&NR(2);
-
-	&add($a2,$b2,$o2);	&FR($a2);
-	&cmpult($o2,$b2,$t2);	&FR($b2);
-	&add($o2,$cc,$o2);
-	&cmpult($o2,$cc,$cc);
-	&add($cc,$t2,$cc);	&FR($t2);
-
-	($t3,$o3)=&NR(2);
-
-	&add($a3,$b3,$o3);	&FR($a3);
-	&cmpult($o3,$b3,$t3);	&FR($b3);
-	&add($o3,$cc,$o3);
-	&cmpult($o3,$cc,$cc);
-	&add($cc,$t3,$cc);	&FR($t3);
-
-	&st($o0,&QWPw(0,$rp)); &FR($o0);
-	&st($o1,&QWPw(0,$rp)); &FR($o1);
-	&st($o2,&QWPw(0,$rp)); &FR($o2);
-	&st($o3,&QWPw(0,$rp)); &FR($o3);
-
-	&sub($count,4,$count);	# count-=4
-	&add($ap,4*$QWS,$ap);	# count+=4
-	&add($bp,4*$QWS,$bp);	# count+=4
-	&add($rp,4*$QWS,$rp);	# count+=4
-
-	&blt($count,&label("finish"));
-	&ld($a0,&QWPw(0,$ap));
-	 &ld($b0,&QWPw(0,$bp));
-	&br(&label("loop"));
-EOF
-##################################################
-	# Do the last 0..3 words
-
-	&set_label("last_loop");
-
-	&ld(($a0)=&NR(1),&QWPw(0,$ap));	# get a
-	&mul($a0,$a0,($l0)=&NR(1));
-	 &add($ap,$QWS,$ap);
-	 &add($rp,2*$QWS,$rp);
-	 &sub($count,1,$count);
-	&muh($a0,$a0,($h0)=&NR(1));	&FR($a0);
-	&st($l0,&QWPw(-2,$rp));		&FR($l0);
-	&st($h0,&QWPw(-1,$rp));		&FR($h0);
-
-	&bgt($count,&label("last_loop"));
-	&function_end_A($name);
-
-######################################################
-	&set_label("finish");
-	&add($count,4,$count);
-	&bgt($count,&label("last_loop"));
-
-	&set_label("end");
-	&function_end($name);
-
-	&fin_pool;
-	}
-
-1;
diff --git a/crypto/openssl/crypto/bn/asm/alpha/sqr_c4.pl b/crypto/openssl/crypto/bn/asm/alpha/sqr_c4.pl
deleted file mode 100644
index bf33f5b50372..000000000000
--- a/crypto/openssl/crypto/bn/asm/alpha/sqr_c4.pl
+++ /dev/null
@@ -1,109 +0,0 @@
-#!/usr/local/bin/perl
-# alpha assember 
-
-sub sqr_add_c
-	{
-	local($a,$c0,$c1,$c2)=@_;
-	local($l1,$h1,$t1,$t2);
-
-	&mul($a,$a,($l1)=&NR(1));
-	&muh($a,$a,($h1)=&NR(1));
-	&add($c0,$l1,$c0);
-	&add($c1,$h1,$c1);
-	&cmpult($c0,$l1,($t1)=&NR(1));	&FR($l1);
-	&cmpult($c1,$h1,($t2)=&NR(1));	&FR($h1);
-	&add($c1,$t1,$c1);		&FR($t1);
-	&add($c2,$t2,$c2);		&FR($t2);
-	}
-
-sub sqr_add_c2
-	{
-	local($a,$b,$c0,$c1,$c2)=@_;
-	local($l1,$h1,$t1,$t2);
-
-	&mul($a,$b,($l1)=&NR(1));
-	&muh($a,$b,($h1)=&NR(1));
-	&cmplt($l1,"zero",($lc1)=&NR(1));
-	&cmplt($h1,"zero",($hc1)=&NR(1));
-	&add($l1,$l1,$l1);
-	&add($h1,$h1,$h1);
-	&add($h1,$lc1,$h1);		&FR($lc1);
-	&add($c2,$hc1,$c2);		&FR($hc1);
-
-	&add($c0,$l1,$c0);
-	&add($c1,$h1,$c1);
-	&cmpult($c0,$l1,($lc1)=&NR(1));	&FR($l1);
-	&cmpult($c1,$h1,($hc1)=&NR(1));	&FR($h1);
-
-	&add($c1,$lc1,$c1);		&FR($lc1);
-	&add($c2,$hc1,$c2);		&FR($hc1);
-	}
-
-
-sub bn_sqr_comba4
-	{
-	local($name)=@_;
-	local(@a,@b,$r,$c0,$c1,$c2);
-
-	$cnt=1;
-	&init_pool(2);
-
-	$rp=&wparam(0);
-	$ap=&wparam(1);
-
-	&function_begin($name,"");
-
-	&comment("");
-
-	&ld(($a[0])=&NR(1),&QWPw(0,$ap));
-	&ld(($a[1])=&NR(1),&QWPw(1,$ap));
-	&ld(($a[2])=&NR(1),&QWPw(2,$ap));
-        &ld(($a[3])=&NR(1),&QWPw(3,$ap)); &FR($ap);
-
-	($c0,$c1,$c2)=&NR(3);
-
-	&mov("zero",$c2);
-	&mul($a[0],$a[0],$c0);
-	&muh($a[0],$a[0],$c1);
-	&st($c0,&QWPw(0,$rp));
-	($c0,$c1,$c2)=($c1,$c2,$c0);
-	&mov("zero",$c2);
-
-	&sqr_add_c2($a[0],$a[1],$c0,$c1,$c2);
-	&st($c0,&QWPw(1,$rp));
-	($c0,$c1,$c2)=($c1,$c2,$c0);
-	&mov("zero",$c2);
-
-	&sqr_add_c($a[1],$c0,$c1,$c2);
-	&sqr_add_c2($a[2],$a[0],$c0,$c1,$c2);
-	&st($c0,&QWPw(2,$rp));
-	($c0,$c1,$c2)=($c1,$c2,$c0);
-	&mov("zero",$c2);
-
-	&sqr_add_c2($a[3],$a[0],$c0,$c1,$c2);
-	&sqr_add_c2($a[2],$a[1],$c0,$c1,$c2);
-	&st($c0,&QWPw(3,$rp));
-	($c0,$c1,$c2)=($c1,$c2,$c0);
-	&mov("zero",$c2);
-
-	&sqr_add_c($a[2],$c0,$c1,$c2);
-	&sqr_add_c2($a[3],$a[1],$c0,$c1,$c2);
-	&st($c0,&QWPw(4,$rp));
-	($c0,$c1,$c2)=($c1,$c2,$c0);
-	&mov("zero",$c2);
-
-	&sqr_add_c2($a[3],$a[2],$c0,$c1,$c2);
-	&st($c0,&QWPw(5,$rp));
-	($c0,$c1,$c2)=($c1,$c2,$c0);
-	&mov("zero",$c2);
-
-	&sqr_add_c($a[3],$c0,$c1,$c2);
-	&st($c0,&QWPw(6,$rp));
-	&st($c1,&QWPw(7,$rp));
-
-	&function_end($name);
-
-	&fin_pool;
-	}
-
-1;
diff --git a/crypto/openssl/crypto/bn/asm/alpha/sqr_c8.pl b/crypto/openssl/crypto/bn/asm/alpha/sqr_c8.pl
deleted file mode 100644
index b4afe085f1c9..000000000000
--- a/crypto/openssl/crypto/bn/asm/alpha/sqr_c8.pl
+++ /dev/null
@@ -1,132 +0,0 @@
-#!/usr/local/bin/perl
-# alpha assember 
-
-sub bn_sqr_comba8
-	{
-	local($name)=@_;
-	local(@a,@b,$r,$c0,$c1,$c2);
-
-	$cnt=1;
-	&init_pool(2);
-
-	$rp=&wparam(0);
-	$ap=&wparam(1);
-
-	&function_begin($name,"");
-
-	&comment("");
-
-	&ld(($a[0])=&NR(1),&QWPw(0,$ap));
-	&ld(($a[1])=&NR(1),&QWPw(1,$ap));
-	&ld(($a[2])=&NR(1),&QWPw(2,$ap));
-	&ld(($a[3])=&NR(1),&QWPw(3,$ap));
-	&ld(($a[4])=&NR(1),&QWPw(4,$ap));
-	&ld(($a[5])=&NR(1),&QWPw(5,$ap));
-	&ld(($a[6])=&NR(1),&QWPw(6,$ap));
-        &ld(($a[7])=&NR(1),&QWPw(7,$ap)); &FR($ap);
-
-	($c0,$c1,$c2)=&NR(3);
-
-	&mov("zero",$c2);
-	&mul($a[0],$a[0],$c0);
-	&muh($a[0],$a[0],$c1);
-	&st($c0,&QWPw(0,$rp));
-	($c0,$c1,$c2)=($c1,$c2,$c0);
-	&mov("zero",$c2);
-
-	&sqr_add_c2($a[1],$a[0],$c0,$c1,$c2);
-	&st($c0,&QWPw(1,$rp));
-	($c0,$c1,$c2)=($c1,$c2,$c0);
-	&mov("zero",$c2);
-
-	&sqr_add_c($a[1],$c0,$c1,$c2);
-	&sqr_add_c2($a[2],$a[0],$c0,$c1,$c2);
-	&st($c0,&QWPw(2,$rp));
-	($c0,$c1,$c2)=($c1,$c2,$c0);
-	&mov("zero",$c2);
-
-	&sqr_add_c2($a[2],$a[1],$c0,$c1,$c2);
-	&sqr_add_c2($a[3],$a[0],$c0,$c1,$c2);
-	&st($c0,&QWPw(3,$rp));
-	($c0,$c1,$c2)=($c1,$c2,$c0);
-	&mov("zero",$c2);
-
-	&sqr_add_c($a[2],$c0,$c1,$c2);
-	&sqr_add_c2($a[3],$a[1],$c0,$c1,$c2);
-	&sqr_add_c2($a[4],$a[0],$c0,$c1,$c2);
-	&st($c0,&QWPw(4,$rp));
-	($c0,$c1,$c2)=($c1,$c2,$c0);
-	&mov("zero",$c2);
-
-	&sqr_add_c2($a[3],$a[2],$c0,$c1,$c2);
-	&sqr_add_c2($a[4],$a[1],$c0,$c1,$c2);
-	&sqr_add_c2($a[5],$a[0],$c0,$c1,$c2);
-	&st($c0,&QWPw(5,$rp));
-	($c0,$c1,$c2)=($c1,$c2,$c0);
-	&mov("zero",$c2);
-
-	&sqr_add_c($a[3],$c0,$c1,$c2);
-	&sqr_add_c2($a[4],$a[2],$c0,$c1,$c2);
-	&sqr_add_c2($a[5],$a[1],$c0,$c1,$c2);
-	&sqr_add_c2($a[6],$a[0],$c0,$c1,$c2);
-	&st($c0,&QWPw(6,$rp));
-	($c0,$c1,$c2)=($c1,$c2,$c0);
-	&mov("zero",$c2);
-
-	&sqr_add_c2($a[4],$a[3],$c0,$c1,$c2);
-	&sqr_add_c2($a[5],$a[2],$c0,$c1,$c2);
-	&sqr_add_c2($a[6],$a[1],$c0,$c1,$c2);
-	&sqr_add_c2($a[7],$a[0],$c0,$c1,$c2);
-	&st($c0,&QWPw(7,$rp));
-	($c0,$c1,$c2)=($c1,$c2,$c0);
-	&mov("zero",$c2);
-
-	&sqr_add_c($a[4],$c0,$c1,$c2);
-	&sqr_add_c2($a[5],$a[3],$c0,$c1,$c2);
-	&sqr_add_c2($a[6],$a[2],$c0,$c1,$c2);
-	&sqr_add_c2($a[7],$a[1],$c0,$c1,$c2);
-	&st($c0,&QWPw(8,$rp));
-	($c0,$c1,$c2)=($c1,$c2,$c0);
-	&mov("zero",$c2);
-
-	&sqr_add_c2($a[5],$a[4],$c0,$c1,$c2);
-	&sqr_add_c2($a[6],$a[3],$c0,$c1,$c2);
-	&sqr_add_c2($a[7],$a[2],$c0,$c1,$c2);
-	&st($c0,&QWPw(9,$rp));
-	($c0,$c1,$c2)=($c1,$c2,$c0);
-	&mov("zero",$c2);
-
-	&sqr_add_c($a[5],$c0,$c1,$c2);
-	&sqr_add_c2($a[6],$a[4],$c0,$c1,$c2);
-	&sqr_add_c2($a[7],$a[3],$c0,$c1,$c2);
-	&st($c0,&QWPw(10,$rp));
-	($c0,$c1,$c2)=($c1,$c2,$c0);
-	&mov("zero",$c2);
-
-	&sqr_add_c2($a[6],$a[5],$c0,$c1,$c2);
-	&sqr_add_c2($a[7],$a[4],$c0,$c1,$c2);
-	&st($c0,&QWPw(11,$rp));
-	($c0,$c1,$c2)=($c1,$c2,$c0);
-	&mov("zero",$c2);
-
-	&sqr_add_c($a[6],$c0,$c1,$c2);
-	&sqr_add_c2($a[7],$a[5],$c0,$c1,$c2);
-	&st($c0,&QWPw(12,$rp));
-	($c0,$c1,$c2)=($c1,$c2,$c0);
-	&mov("zero",$c2);
-
-	&sqr_add_c2($a[7],$a[6],$c0,$c1,$c2);
-	&st($c0,&QWPw(13,$rp));
-	($c0,$c1,$c2)=($c1,$c2,$c0);
-	&mov("zero",$c2);
-
-	&sqr_add_c($a[7],$c0,$c1,$c2);
-	&st($c0,&QWPw(14,$rp));
-	&st($c1,&QWPw(15,$rp));
-
-	&function_end($name);
-
-	&fin_pool;
-	}
-
-1;
diff --git a/crypto/openssl/crypto/bn/asm/alpha/sub.pl b/crypto/openssl/crypto/bn/asm/alpha/sub.pl
deleted file mode 100644
index d998da5c21a2..000000000000
--- a/crypto/openssl/crypto/bn/asm/alpha/sub.pl
+++ /dev/null
@@ -1,108 +0,0 @@
-#!/usr/local/bin/perl
-# alpha assember
-
-sub bn_sub_words
-	{
-	local($name)=@_;
-	local($cc,$a,$b,$r);
-
-	&init_pool(4);
-	($cc)=GR("r0");
-
-	$rp=&wparam(0);
-	$ap=&wparam(1);
-	$bp=&wparam(2);
-	$count=&wparam(3);
-
-	&function_begin($name,"");
-
-	&comment("");
-	&sub($count,4,$count);
-	&mov("zero",$cc);
-	&blt($count,&label("finish"));
-
-	($a0,$b0)=&NR(2);
-	&ld($a0,&QWPw(0,$ap));
-	&ld($b0,&QWPw(0,$bp));
-
-##########################################################
-	&set_label("loop");
-
-	($a1,$tmp,$b1,$a2,$b2,$a3,$b3,$o0)=&NR(8);
-	&ld($a1,&QWPw(1,$ap));
-	 &cmpult($a0,$b0,$tmp);	# will we borrow?
-	&ld($b1,&QWPw(1,$bp));
-	 &sub($a0,$b0,$a0);		# do the subtract
-	&ld($a2,&QWPw(2,$ap));
-	 &cmpult($a0,$cc,$b0);	# will we borrow?
-	&ld($b2,&QWPw(2,$bp));
-	 &sub($a0,$cc,$o0);	# will we borrow?
-	&ld($a3,&QWPw(3,$ap));
-	 &add($b0,$tmp,$cc); ($t1,$o1)=&NR(2); &FR($tmp);
-
-	&cmpult($a1,$b1,$t1);	# will we borrow?
-	 &sub($a1,$b1,$a1);	# do the subtract
-	&ld($b3,&QWPw(3,$bp));
-	 &cmpult($a1,$cc,$b1);	# will we borrow?
-	&sub($a1,$cc,$o1);	# will we borrow?
-	 &add($b1,$t1,$cc); ($tmp,$o2)=&NR(2); &FR($t1,$a1,$b1);
-	
-	&cmpult($a2,$b2,$tmp);	# will we borrow?
-	 &sub($a2,$b2,$a2);		# do the subtract
-	&st($o0,&QWPw(0,$rp));	&FR($o0); # save
-	 &cmpult($a2,$cc,$b2);	# will we borrow?
-	&sub($a2,$cc,$o2);	# will we borrow?
-	 &add($b2,$tmp,$cc); ($t3,$o3)=&NR(2); &FR($tmp,$a2,$b2);
-
-	&cmpult($a3,$b3,$t3);	# will we borrow?
-	 &sub($a3,$b3,$a3);	# do the subtract
-	&st($o1,&QWPw(1,$rp)); &FR($o1);
-	 &cmpult($a3,$cc,$b3);	# will we borrow?
-	&sub($a3,$cc,$o3);	# will we borrow?
-	 &add($b3,$t3,$cc); &FR($t3,$a3,$b3);
-
-	&st($o2,&QWPw(2,$rp));	&FR($o2);
-	 &sub($count,4,$count);	# count-=4
-	&st($o3,&QWPw(3,$rp));	&FR($o3);
-	 &add($ap,4*$QWS,$ap);	# count+=4
-	&add($bp,4*$QWS,$bp);	# count+=4
-	 &add($rp,4*$QWS,$rp);	# count+=4
-
-	&blt($count,&label("finish"));
-	&ld($a0,&QWPw(0,$ap));
-	 &ld($b0,&QWPw(0,$bp));
-	&br(&label("loop"));
-##################################################
-	# Do the last 0..3 words
-
-	&set_label("last_loop");
-
-	&ld($a0,&QWPw(0,$ap));	# get a
-	 &ld($b0,&QWPw(0,$bp));	# get b
-	&cmpult($a0,$b0,$tmp);	# will we borrow?
-	&sub($a0,$b0,$a0);	# do the subtract
-	&cmpult($a0,$cc,$b0);	# will we borrow?
-	&sub($a0,$cc,$a0);	# will we borrow?
-	&st($a0,&QWPw(0,$rp));	# save
-	&add($b0,$tmp,$cc);	# add the borrows
-
-	&add($ap,$QWS,$ap);
-	&add($bp,$QWS,$bp);
-	&add($rp,$QWS,$rp);
-	&sub($count,1,$count);
-	&bgt($count,&label("last_loop"));
-	&function_end_A($name);
-
-######################################################
-	&set_label("finish");
-	&add($count,4,$count);
-	&bgt($count,&label("last_loop"));
-
-	&FR($a0,$b0);
-	&set_label("end");
-	&function_end($name);
-
-	&fin_pool;
-	}
-
-1;
diff --git a/crypto/openssl/crypto/bn/asm/bn-586.pl b/crypto/openssl/crypto/bn/asm/bn-586.pl
deleted file mode 100644
index 26c2685a726e..000000000000
--- a/crypto/openssl/crypto/bn/asm/bn-586.pl
+++ /dev/null
@@ -1,675 +0,0 @@
-#!/usr/local/bin/perl
-
-push(@INC,"perlasm","../../perlasm");
-require "x86asm.pl";
-
-&asm_init($ARGV[0],$0);
-
-$sse2=0;
-for (@ARGV) { $sse2=1 if (/-DOPENSSL_IA32_SSE2/); }
-
-&external_label("OPENSSL_ia32cap_P") if ($sse2);
-
-&bn_mul_add_words("bn_mul_add_words");
-&bn_mul_words("bn_mul_words");
-&bn_sqr_words("bn_sqr_words");
-&bn_div_words("bn_div_words");
-&bn_add_words("bn_add_words");
-&bn_sub_words("bn_sub_words");
-&bn_sub_part_words("bn_sub_part_words");
-
-&asm_finish();
-
-sub bn_mul_add_words
-	{
-	local($name)=@_;
-
-	&function_begin($name,$sse2?"EXTRN\t_OPENSSL_ia32cap_P:DWORD":"");
-
-	&comment("");
-	$Low="eax";
-	$High="edx";
-	$a="ebx";
-	$w="ebp";
-	$r="edi";
-	$c="esi";
-
-	&xor($c,$c);		# clear carry
-	&mov($r,&wparam(0));	#
-
-	&mov("ecx",&wparam(2));	#
-	&mov($a,&wparam(1));	#
-
-	&and("ecx",0xfffffff8);	# num / 8
-	&mov($w,&wparam(3));	#
-
-	&push("ecx");		# Up the stack for a tmp variable
-
-	&jz(&label("maw_finish"));
-
-	if ($sse2) {
-		&picmeup("eax","OPENSSL_ia32cap_P");
-		&bt(&DWP(0,"eax"),26);
-		&jnc(&label("maw_loop"));
-
-		&movd("mm0",$w);		# mm0 = w
-		&pxor("mm1","mm1");		# mm1 = carry_in
-
-		&set_label("maw_sse2_loop",0);
-		&movd("mm3",&DWP(0,$r,"",0));	# mm3 = r[0]
-		&paddq("mm1","mm3");		# mm1 = carry_in + r[0]
-		&movd("mm2",&DWP(0,$a,"",0));	# mm2 = a[0]
-		&pmuludq("mm2","mm0");		# mm2 = w*a[0]
-		&movd("mm4",&DWP(4,$a,"",0));	# mm4 = a[1]
-		&pmuludq("mm4","mm0");		# mm4 = w*a[1]
-		&movd("mm6",&DWP(8,$a,"",0));	# mm6 = a[2]
-		&pmuludq("mm6","mm0");		# mm6 = w*a[2]
-		&movd("mm7",&DWP(12,$a,"",0));	# mm7 = a[3]
-		&pmuludq("mm7","mm0");		# mm7 = w*a[3]
-		&paddq("mm1","mm2");		# mm1 = carry_in + r[0] + w*a[0]
-		&movd("mm3",&DWP(4,$r,"",0));	# mm3 = r[1]
-		&paddq("mm3","mm4");		# mm3 = r[1] + w*a[1]
-		&movd("mm5",&DWP(8,$r,"",0));	# mm5 = r[2]
-		&paddq("mm5","mm6");		# mm5 = r[2] + w*a[2]
-		&movd("mm4",&DWP(12,$r,"",0));	# mm4 = r[3]
-		&paddq("mm7","mm4");		# mm7 = r[3] + w*a[3]
-		&movd(&DWP(0,$r,"",0),"mm1");
-		&movd("mm2",&DWP(16,$a,"",0));	# mm2 = a[4]
-		&pmuludq("mm2","mm0");		# mm2 = w*a[4]
-		&psrlq("mm1",32);		# mm1 = carry0
-		&movd("mm4",&DWP(20,$a,"",0));	# mm4 = a[5]
-		&pmuludq("mm4","mm0");		# mm4 = w*a[5]
-		&paddq("mm1","mm3");		# mm1 = carry0 + r[1] + w*a[1]
-		&movd("mm6",&DWP(24,$a,"",0));	# mm6 = a[6]
-		&pmuludq("mm6","mm0");		# mm6 = w*a[6]
-		&movd(&DWP(4,$r,"",0),"mm1");
-		&psrlq("mm1",32);		# mm1 = carry1
-		&movd("mm3",&DWP(28,$a,"",0));	# mm3 = a[7]
-		&add($a,32);
-		&pmuludq("mm3","mm0");		# mm3 = w*a[7]
-		&paddq("mm1","mm5");		# mm1 = carry1 + r[2] + w*a[2]
-		&movd("mm5",&DWP(16,$r,"",0));	# mm5 = r[4]
-		&paddq("mm2","mm5");		# mm2 = r[4] + w*a[4]
-		&movd(&DWP(8,$r,"",0),"mm1");
-		&psrlq("mm1",32);		# mm1 = carry2
-		&paddq("mm1","mm7");		# mm1 = carry2 + r[3] + w*a[3]
-		&movd("mm5",&DWP(20,$r,"",0));	# mm5 = r[5]
-		&paddq("mm4","mm5");		# mm4 = r[5] + w*a[5]
-		&movd(&DWP(12,$r,"",0),"mm1");
-		&psrlq("mm1",32);		# mm1 = carry3
-		&paddq("mm1","mm2");		# mm1 = carry3 + r[4] + w*a[4]
-		&movd("mm5",&DWP(24,$r,"",0));	# mm5 = r[6]
-		&paddq("mm6","mm5");		# mm6 = r[6] + w*a[6]
-		&movd(&DWP(16,$r,"",0),"mm1");
-		&psrlq("mm1",32);		# mm1 = carry4
-		&paddq("mm1","mm4");		# mm1 = carry4 + r[5] + w*a[5]
-		&movd("mm5",&DWP(28,$r,"",0));	# mm5 = r[7]
-		&paddq("mm3","mm5");		# mm3 = r[7] + w*a[7]
-		&movd(&DWP(20,$r,"",0),"mm1");
-		&psrlq("mm1",32);		# mm1 = carry5
-		&paddq("mm1","mm6");		# mm1 = carry5 + r[6] + w*a[6]
-		&movd(&DWP(24,$r,"",0),"mm1");
-		&psrlq("mm1",32);		# mm1 = carry6
-		&paddq("mm1","mm3");		# mm1 = carry6 + r[7] + w*a[7]
-		&movd(&DWP(28,$r,"",0),"mm1");
-		&add($r,32);
-		&psrlq("mm1",32);		# mm1 = carry_out
-
-		&sub("ecx",8);
-		&jnz(&label("maw_sse2_loop"));
-
-		&movd($c,"mm1");		# c = carry_out
-		&emms();
-
-		&jmp(&label("maw_finish"));
-	}
-
-	&set_label("maw_loop",0);
-
-	&mov(&swtmp(0),"ecx");	#
-
-	for ($i=0; $i<32; $i+=4)
-		{
-		&comment("Round $i");
-
-		 &mov("eax",&DWP($i,$a,"",0)); 	# *a
-		&mul($w);			# *a * w
-		&add("eax",$c);		# L(t)+= *r
-		 &mov($c,&DWP($i,$r,"",0));	# L(t)+= *r
-		&adc("edx",0);			# H(t)+=carry
-		 &add("eax",$c);		# L(t)+=c
-		&adc("edx",0);			# H(t)+=carry
-		 &mov(&DWP($i,$r,"",0),"eax");	# *r= L(t);
-		&mov($c,"edx");			# c=  H(t);
-		}
-
-	&comment("");
-	&mov("ecx",&swtmp(0));	#
-	&add($a,32);
-	&add($r,32);
-	&sub("ecx",8);
-	&jnz(&label("maw_loop"));
-
-	&set_label("maw_finish",0);
-	&mov("ecx",&wparam(2));	# get num
-	&and("ecx",7);
-	&jnz(&label("maw_finish2"));	# helps branch prediction
-	&jmp(&label("maw_end"));
-
-	&set_label("maw_finish2",1);
-	for ($i=0; $i<7; $i++)
-		{
-		&comment("Tail Round $i");
-		 &mov("eax",&DWP($i*4,$a,"",0));# *a
-		&mul($w);			# *a * w
-		&add("eax",$c);			# L(t)+=c
-		 &mov($c,&DWP($i*4,$r,"",0));	# L(t)+= *r
-		&adc("edx",0);			# H(t)+=carry
-		 &add("eax",$c);
-		&adc("edx",0);			# H(t)+=carry
-		 &dec("ecx") if ($i != 7-1);
-		&mov(&DWP($i*4,$r,"",0),"eax");	# *r= L(t);
-		 &mov($c,"edx");			# c=  H(t);
-		&jz(&label("maw_end")) if ($i != 7-1);
-		}
-	&set_label("maw_end",0);
-	&mov("eax",$c);
-
-	&pop("ecx");	# clear variable from
-
-	&function_end($name);
-	}
-
-sub bn_mul_words
-	{
-	local($name)=@_;
-
-	&function_begin($name,"");
-
-	&comment("");
-	$Low="eax";
-	$High="edx";
-	$a="ebx";
-	$w="ecx";
-	$r="edi";
-	$c="esi";
-	$num="ebp";
-
-	&xor($c,$c);		# clear carry
-	&mov($r,&wparam(0));	#
-	&mov($a,&wparam(1));	#
-	&mov($num,&wparam(2));	#
-	&mov($w,&wparam(3));	#
-
-	&and($num,0xfffffff8);	# num / 8
-	&jz(&label("mw_finish"));
-
-	&set_label("mw_loop",0);
-	for ($i=0; $i<32; $i+=4)
-		{
-		&comment("Round $i");
-
-		 &mov("eax",&DWP($i,$a,"",0)); 	# *a
-		&mul($w);			# *a * w
-		&add("eax",$c);			# L(t)+=c
-		 # XXX
-
-		&adc("edx",0);			# H(t)+=carry
-		 &mov(&DWP($i,$r,"",0),"eax");	# *r= L(t);
-
-		&mov($c,"edx");			# c=  H(t);
-		}
-
-	&comment("");
-	&add($a,32);
-	&add($r,32);
-	&sub($num,8);
-	&jz(&label("mw_finish"));
-	&jmp(&label("mw_loop"));
-
-	&set_label("mw_finish",0);
-	&mov($num,&wparam(2));	# get num
-	&and($num,7);
-	&jnz(&label("mw_finish2"));
-	&jmp(&label("mw_end"));
-
-	&set_label("mw_finish2",1);
-	for ($i=0; $i<7; $i++)
-		{
-		&comment("Tail Round $i");
-		 &mov("eax",&DWP($i*4,$a,"",0));# *a
-		&mul($w);			# *a * w
-		&add("eax",$c);			# L(t)+=c
-		 # XXX
-		&adc("edx",0);			# H(t)+=carry
-		 &mov(&DWP($i*4,$r,"",0),"eax");# *r= L(t);
-		&mov($c,"edx");			# c=  H(t);
-		 &dec($num) if ($i != 7-1);
-		&jz(&label("mw_end")) if ($i != 7-1);
-		}
-	&set_label("mw_end",0);
-	&mov("eax",$c);
-
-	&function_end($name);
-	}
-
-sub bn_sqr_words
-	{
-	local($name)=@_;
-
-	&function_begin($name,"");
-
-	&comment("");
-	$r="esi";
-	$a="edi";
-	$num="ebx";
-
-	&mov($r,&wparam(0));	#
-	&mov($a,&wparam(1));	#
-	&mov($num,&wparam(2));	#
-
-	&and($num,0xfffffff8);	# num / 8
-	&jz(&label("sw_finish"));
-
-	&set_label("sw_loop",0);
-	for ($i=0; $i<32; $i+=4)
-		{
-		&comment("Round $i");
-		&mov("eax",&DWP($i,$a,"",0)); 	# *a
-		 # XXX
-		&mul("eax");			# *a * *a
-		&mov(&DWP($i*2,$r,"",0),"eax");	#
-		 &mov(&DWP($i*2+4,$r,"",0),"edx");#
-		}
-
-	&comment("");
-	&add($a,32);
-	&add($r,64);
-	&sub($num,8);
-	&jnz(&label("sw_loop"));
-
-	&set_label("sw_finish",0);
-	&mov($num,&wparam(2));	# get num
-	&and($num,7);
-	&jz(&label("sw_end"));
-
-	for ($i=0; $i<7; $i++)
-		{
-		&comment("Tail Round $i");
-		&mov("eax",&DWP($i*4,$a,"",0));	# *a
-		 # XXX
-		&mul("eax");			# *a * *a
-		&mov(&DWP($i*8,$r,"",0),"eax");	#
-		 &dec($num) if ($i != 7-1);
-		&mov(&DWP($i*8+4,$r,"",0),"edx");
-		 &jz(&label("sw_end")) if ($i != 7-1);
-		}
-	&set_label("sw_end",0);
-
-	&function_end($name);
-	}
-
-sub bn_div_words
-	{
-	local($name)=@_;
-
-	&function_begin($name,"");
-	&mov("edx",&wparam(0));	#
-	&mov("eax",&wparam(1));	#
-	&mov("ebx",&wparam(2));	#
-	&div("ebx");
-	&function_end($name);
-	}
-
-sub bn_add_words
-	{
-	local($name)=@_;
-
-	&function_begin($name,"");
-
-	&comment("");
-	$a="esi";
-	$b="edi";
-	$c="eax";
-	$r="ebx";
-	$tmp1="ecx";
-	$tmp2="edx";
-	$num="ebp";
-
-	&mov($r,&wparam(0));	# get r
-	 &mov($a,&wparam(1));	# get a
-	&mov($b,&wparam(2));	# get b
-	 &mov($num,&wparam(3));	# get num
-	&xor($c,$c);		# clear carry
-	 &and($num,0xfffffff8);	# num / 8
-
-	&jz(&label("aw_finish"));
-
-	&set_label("aw_loop",0);
-	for ($i=0; $i<8; $i++)
-		{
-		&comment("Round $i");
-
-		&mov($tmp1,&DWP($i*4,$a,"",0)); 	# *a
-		 &mov($tmp2,&DWP($i*4,$b,"",0)); 	# *b
-		&add($tmp1,$c);
-		 &mov($c,0);
-		&adc($c,$c);
-		 &add($tmp1,$tmp2);
-		&adc($c,0);
-		 &mov(&DWP($i*4,$r,"",0),$tmp1); 	# *r
-		}
-
-	&comment("");
-	&add($a,32);
-	 &add($b,32);
-	&add($r,32);
-	 &sub($num,8);
-	&jnz(&label("aw_loop"));
-
-	&set_label("aw_finish",0);
-	&mov($num,&wparam(3));	# get num
-	&and($num,7);
-	 &jz(&label("aw_end"));
-
-	for ($i=0; $i<7; $i++)
-		{
-		&comment("Tail Round $i");
-		&mov($tmp1,&DWP($i*4,$a,"",0));	# *a
-		 &mov($tmp2,&DWP($i*4,$b,"",0));# *b
-		&add($tmp1,$c);
-		 &mov($c,0);
-		&adc($c,$c);
-		 &add($tmp1,$tmp2);
-		&adc($c,0);
-		 &dec($num) if ($i != 6);
-		&mov(&DWP($i*4,$r,"",0),$tmp1);	# *r
-		 &jz(&label("aw_end")) if ($i != 6);
-		}
-	&set_label("aw_end",0);
-
-#	&mov("eax",$c);		# $c is "eax"
-
-	&function_end($name);
-	}
-
-sub bn_sub_words
-	{
-	local($name)=@_;
-
-	&function_begin($name,"");
-
-	&comment("");
-	$a="esi";
-	$b="edi";
-	$c="eax";
-	$r="ebx";
-	$tmp1="ecx";
-	$tmp2="edx";
-	$num="ebp";
-
-	&mov($r,&wparam(0));	# get r
-	 &mov($a,&wparam(1));	# get a
-	&mov($b,&wparam(2));	# get b
-	 &mov($num,&wparam(3));	# get num
-	&xor($c,$c);		# clear carry
-	 &and($num,0xfffffff8);	# num / 8
-
-	&jz(&label("aw_finish"));
-
-	&set_label("aw_loop",0);
-	for ($i=0; $i<8; $i++)
-		{
-		&comment("Round $i");
-
-		&mov($tmp1,&DWP($i*4,$a,"",0)); 	# *a
-		 &mov($tmp2,&DWP($i*4,$b,"",0)); 	# *b
-		&sub($tmp1,$c);
-		 &mov($c,0);
-		&adc($c,$c);
-		 &sub($tmp1,$tmp2);
-		&adc($c,0);
-		 &mov(&DWP($i*4,$r,"",0),$tmp1); 	# *r
-		}
-
-	&comment("");
-	&add($a,32);
-	 &add($b,32);
-	&add($r,32);
-	 &sub($num,8);
-	&jnz(&label("aw_loop"));
-
-	&set_label("aw_finish",0);
-	&mov($num,&wparam(3));	# get num
-	&and($num,7);
-	 &jz(&label("aw_end"));
-
-	for ($i=0; $i<7; $i++)
-		{
-		&comment("Tail Round $i");
-		&mov($tmp1,&DWP($i*4,$a,"",0));	# *a
-		 &mov($tmp2,&DWP($i*4,$b,"",0));# *b
-		&sub($tmp1,$c);
-		 &mov($c,0);
-		&adc($c,$c);
-		 &sub($tmp1,$tmp2);
-		&adc($c,0);
-		 &dec($num) if ($i != 6);
-		&mov(&DWP($i*4,$r,"",0),$tmp1);	# *r
-		 &jz(&label("aw_end")) if ($i != 6);
-		}
-	&set_label("aw_end",0);
-
-#	&mov("eax",$c);		# $c is "eax"
-
-	&function_end($name);
-	}
-
-sub bn_sub_part_words
-	{
-	local($name)=@_;
-
-	&function_begin($name,"");
-
-	&comment("");
-	$a="esi";
-	$b="edi";
-	$c="eax";
-	$r="ebx";
-	$tmp1="ecx";
-	$tmp2="edx";
-	$num="ebp";
-
-	&mov($r,&wparam(0));	# get r
-	 &mov($a,&wparam(1));	# get a
-	&mov($b,&wparam(2));	# get b
-	 &mov($num,&wparam(3));	# get num
-	&xor($c,$c);		# clear carry
-	 &and($num,0xfffffff8);	# num / 8
-
-	&jz(&label("aw_finish"));
-
-	&set_label("aw_loop",0);
-	for ($i=0; $i<8; $i++)
-		{
-		&comment("Round $i");
-
-		&mov($tmp1,&DWP($i*4,$a,"",0)); 	# *a
-		 &mov($tmp2,&DWP($i*4,$b,"",0)); 	# *b
-		&sub($tmp1,$c);
-		 &mov($c,0);
-		&adc($c,$c);
-		 &sub($tmp1,$tmp2);
-		&adc($c,0);
-		 &mov(&DWP($i*4,$r,"",0),$tmp1); 	# *r
-		}
-
-	&comment("");
-	&add($a,32);
-	 &add($b,32);
-	&add($r,32);
-	 &sub($num,8);
-	&jnz(&label("aw_loop"));
-
-	&set_label("aw_finish",0);
-	&mov($num,&wparam(3));	# get num
-	&and($num,7);
-	 &jz(&label("aw_end"));
-
-	for ($i=0; $i<7; $i++)
-		{
-		&comment("Tail Round $i");
-		&mov($tmp1,&DWP(0,$a,"",0));	# *a
-		 &mov($tmp2,&DWP(0,$b,"",0));# *b
-		&sub($tmp1,$c);
-		 &mov($c,0);
-		&adc($c,$c);
-		 &sub($tmp1,$tmp2);
-		&adc($c,0);
-		&mov(&DWP(0,$r,"",0),$tmp1);	# *r
-		&add($a, 4);
-		&add($b, 4);
-		&add($r, 4);
-		 &dec($num) if ($i != 6);
-		 &jz(&label("aw_end")) if ($i != 6);
-		}
-	&set_label("aw_end",0);
-
-	&cmp(&wparam(4),0);
-	&je(&label("pw_end"));
-
-	&mov($num,&wparam(4));	# get dl
-	&cmp($num,0);
-	&je(&label("pw_end"));
-	&jge(&label("pw_pos"));
-
-	&comment("pw_neg");
-	&mov($tmp2,0);
-	&sub($tmp2,$num);
-	&mov($num,$tmp2);
-	&and($num,0xfffffff8);	# num / 8
-	&jz(&label("pw_neg_finish"));
-
-	&set_label("pw_neg_loop",0);
-	for ($i=0; $i<8; $i++)
-	{
-	    &comment("dl<0 Round $i");
-
-	    &mov($tmp1,0);
-	    &mov($tmp2,&DWP($i*4,$b,"",0)); 	# *b
-	    &sub($tmp1,$c);
-	    &mov($c,0);
-	    &adc($c,$c);
-	    &sub($tmp1,$tmp2);
-	    &adc($c,0);
-	    &mov(&DWP($i*4,$r,"",0),$tmp1); 	# *r
-	}
-	    
-	&comment("");
-	&add($b,32);
-	&add($r,32);
-	&sub($num,8);
-	&jnz(&label("pw_neg_loop"));
-	    
-	&set_label("pw_neg_finish",0);
-	&mov($tmp2,&wparam(4));	# get dl
-	&mov($num,0);
-	&sub($num,$tmp2);
-	&and($num,7);
-	&jz(&label("pw_end"));
-	    
-	for ($i=0; $i<7; $i++)
-	{
-	    &comment("dl<0 Tail Round $i");
-	    &mov($tmp1,0);
-	    &mov($tmp2,&DWP($i*4,$b,"",0));# *b
-	    &sub($tmp1,$c);
-	    &mov($c,0);
-	    &adc($c,$c);
-	    &sub($tmp1,$tmp2);
-	    &adc($c,0);
-	    &dec($num) if ($i != 6);
-	    &mov(&DWP($i*4,$r,"",0),$tmp1);	# *r
-	    &jz(&label("pw_end")) if ($i != 6);
-	}
-
-	&jmp(&label("pw_end"));
-	
-	&set_label("pw_pos",0);
-	
-	&and($num,0xfffffff8);	# num / 8
-	&jz(&label("pw_pos_finish"));
-
-	&set_label("pw_pos_loop",0);
-
-	for ($i=0; $i<8; $i++)
-	{
-	    &comment("dl>0 Round $i");
-
-	    &mov($tmp1,&DWP($i*4,$a,"",0));	# *a
-	    &sub($tmp1,$c);
-	    &mov(&DWP($i*4,$r,"",0),$tmp1);	# *r
-	    &jnc(&label("pw_nc".$i));
-	}
-	    
-	&comment("");
-	&add($a,32);
-	&add($r,32);
-	&sub($num,8);
-	&jnz(&label("pw_pos_loop"));
-	    
-	&set_label("pw_pos_finish",0);
-	&mov($num,&wparam(4));	# get dl
-	&and($num,7);
-	&jz(&label("pw_end"));
-	    
-	for ($i=0; $i<7; $i++)
-	{
-	    &comment("dl>0 Tail Round $i");
-	    &mov($tmp1,&DWP($i*4,$a,"",0));	# *a
-	    &sub($tmp1,$c);
-	    &mov(&DWP($i*4,$r,"",0),$tmp1);	# *r
-	    &jnc(&label("pw_tail_nc".$i));
-	    &dec($num) if ($i != 6);
-	    &jz(&label("pw_end")) if ($i != 6);
-	}
-	&mov($c,1);
-	&jmp(&label("pw_end"));
-
-	&set_label("pw_nc_loop",0);
-	for ($i=0; $i<8; $i++)
-	{
-	    &mov($tmp1,&DWP($i*4,$a,"",0));	# *a
-	    &mov(&DWP($i*4,$r,"",0),$tmp1);	# *r
-	    &set_label("pw_nc".$i,0);
-	}
-	    
-	&comment("");
-	&add($a,32);
-	&add($r,32);
-	&sub($num,8);
-	&jnz(&label("pw_nc_loop"));
-	    
-	&mov($num,&wparam(4));	# get dl
-	&and($num,7);
-	&jz(&label("pw_nc_end"));
-	    
-	for ($i=0; $i<7; $i++)
-	{
-	    &mov($tmp1,&DWP($i*4,$a,"",0));	# *a
-	    &mov(&DWP($i*4,$r,"",0),$tmp1);	# *r
-	    &set_label("pw_tail_nc".$i,0);
-	    &dec($num) if ($i != 6);
-	    &jz(&label("pw_nc_end")) if ($i != 6);
-	}
-
-	&set_label("pw_nc_end",0);
-	&mov($c,0);
-
-	&set_label("pw_end",0);
-
-#	&mov("eax",$c);		# $c is "eax"
-
-	&function_end($name);
-	}
-
diff --git a/crypto/openssl/crypto/bn/asm/bn-alpha.pl b/crypto/openssl/crypto/bn/asm/bn-alpha.pl
deleted file mode 100644
index 302edf237678..000000000000
--- a/crypto/openssl/crypto/bn/asm/bn-alpha.pl
+++ /dev/null
@@ -1,571 +0,0 @@
-#!/usr/local/bin/perl
-# I have this in perl so I can use more usefull register names and then convert
-# them into alpha registers.
-#
-
-$d=&data();
-$d =~ s/CC/0/g;
-$d =~ s/R1/1/g;
-$d =~ s/R2/2/g;
-$d =~ s/R3/3/g;
-$d =~ s/R4/4/g;
-$d =~ s/L1/5/g;
-$d =~ s/L2/6/g;
-$d =~ s/L3/7/g;
-$d =~ s/L4/8/g;
-$d =~ s/O1/22/g;
-$d =~ s/O2/23/g;
-$d =~ s/O3/24/g;
-$d =~ s/O4/25/g;
-$d =~ s/A1/20/g;
-$d =~ s/A2/21/g;
-$d =~ s/A3/27/g;
-$d =~ s/A4/28/g;
-if (0){
-}
-
-print $d;
-
-sub data
-	{
-	local($data)=<<'EOF';
-
- # DEC Alpha assember
- # The bn_div_words is actually gcc output but the other parts are hand done.
- # Thanks to tzeruch@ceddec.com for sending me the gcc output for
- # bn_div_words.
- # I've gone back and re-done most of routines.
- # The key thing to remeber for the 164 CPU is that while a
- # multiply operation takes 8 cycles, another one can only be issued
- # after 4 cycles have elapsed.  I've done modification to help
- # improve this.  Also, normally, a ld instruction will not be available
- # for about 3 cycles.
-	.file	1 "bn_asm.c"
-	.set noat
-gcc2_compiled.:
-__gnu_compiled_c:
-	.text
-	.align 3
-	.globl bn_mul_add_words
-	.ent bn_mul_add_words
-bn_mul_add_words:
-bn_mul_add_words..ng:
-	.frame $30,0,$26,0
-	.prologue 0
-	.align 5
-	subq	$18,4,$18
-	bis	$31,$31,$CC
-	blt	$18,$43		# if we are -1, -2, -3 or -4 goto tail code
-	ldq	$A1,0($17)	# 1 1
-	ldq	$R1,0($16)	# 1 1
-	.align 3
-$42:
-	mulq	$A1,$19,$L1	# 1 2 1	######
-	ldq	$A2,8($17)	# 2 1
-	ldq	$R2,8($16)	# 2 1
-	umulh	$A1,$19,$A1	# 1 2	######
-	ldq	$A3,16($17)	# 3 1
-	ldq	$R3,16($16)	# 3 1
-	mulq	$A2,$19,$L2	# 2 2 1	######
-	 ldq	$A4,24($17)	# 4 1
-	addq	$R1,$L1,$R1	# 1 2 2
-	 ldq	$R4,24($16)	# 4 1
-	umulh	$A2,$19,$A2	# 2 2	######
-	 cmpult	$R1,$L1,$O1	# 1 2 3 1
-	addq	$A1,$O1,$A1	# 1 3 1
-	 addq	$R1,$CC,$R1	# 1 2 3 1
-	mulq	$A3,$19,$L3	# 3 2 1	######
-	 cmpult	$R1,$CC,$CC	# 1 2 3 2
-	addq	$R2,$L2,$R2	# 2 2 2
-	 addq	$A1,$CC,$CC	# 1 3 2 
-	cmpult	$R2,$L2,$O2	# 2 2 3 1
-	 addq	$A2,$O2,$A2	# 2 3 1
-	umulh	$A3,$19,$A3	# 3 2	######
-	 addq	$R2,$CC,$R2	# 2 2 3 1
-	cmpult	$R2,$CC,$CC	# 2 2 3 2
-	 subq	$18,4,$18
-	mulq	$A4,$19,$L4	# 4 2 1	######
-	 addq	$A2,$CC,$CC	# 2 3 2 
-	addq	$R3,$L3,$R3	# 3 2 2
-	 addq	$16,32,$16
-	cmpult	$R3,$L3,$O3	# 3 2 3 1
-	 stq	$R1,-32($16)	# 1 2 4
-	umulh	$A4,$19,$A4	# 4 2	######
-	 addq	$A3,$O3,$A3	# 3 3 1
-	addq	$R3,$CC,$R3	# 3 2 3 1
-	 stq	$R2,-24($16)	# 2 2 4
-	cmpult	$R3,$CC,$CC	# 3 2 3 2
-	 stq	$R3,-16($16)	# 3 2 4
-	addq	$R4,$L4,$R4	# 4 2 2
-	 addq	$A3,$CC,$CC	# 3 3 2 
-	cmpult	$R4,$L4,$O4	# 4 2 3 1
-	 addq	$17,32,$17
-	addq	$A4,$O4,$A4	# 4 3 1
-	 addq	$R4,$CC,$R4	# 4 2 3 1
-	cmpult	$R4,$CC,$CC	# 4 2 3 2
-	 stq	$R4,-8($16)	# 4 2 4
-	addq	$A4,$CC,$CC	# 4 3 2 
-	 blt	$18,$43
-
-	ldq	$A1,0($17)	# 1 1
-	ldq	$R1,0($16)	# 1 1
-
-	br	$42
-
-	.align 4
-$45:
-	ldq	$A1,0($17)	# 4 1
-	ldq	$R1,0($16)	# 4 1
-	mulq	$A1,$19,$L1	# 4 2 1
-	subq	$18,1,$18
-	addq	$16,8,$16
-	addq	$17,8,$17
-	umulh	$A1,$19,$A1	# 4 2
-	addq	$R1,$L1,$R1	# 4 2 2
-	cmpult	$R1,$L1,$O1	# 4 2 3 1
-	addq	$A1,$O1,$A1	# 4 3 1
-	addq	$R1,$CC,$R1	# 4 2 3 1
-	cmpult	$R1,$CC,$CC	# 4 2 3 2
-	addq	$A1,$CC,$CC	# 4 3 2 
-	stq	$R1,-8($16)	# 4 2 4
-	bgt	$18,$45
-	ret	$31,($26),1	# else exit
-
-	.align 4
-$43:
-	addq	$18,4,$18
-	bgt	$18,$45		# goto tail code
-	ret	$31,($26),1	# else exit
-
-	.end bn_mul_add_words
-	.align 3
-	.globl bn_mul_words
-	.ent bn_mul_words
-bn_mul_words:
-bn_mul_words..ng:
-	.frame $30,0,$26,0
-	.prologue 0
-	.align 5
-	subq	$18,4,$18
-	bis	$31,$31,$CC
-	blt	$18,$143	# if we are -1, -2, -3 or -4 goto tail code
-	ldq	$A1,0($17)	# 1 1
-	.align 3
-$142:
-
-	mulq	$A1,$19,$L1	# 1 2 1	#####
-	 ldq	$A2,8($17)	# 2 1
-	 ldq	$A3,16($17)	# 3 1
-	umulh	$A1,$19,$A1	# 1 2	#####
-	 ldq	$A4,24($17)	# 4 1
-	mulq	$A2,$19,$L2	# 2 2 1	#####
-	 addq	$L1,$CC,$L1	# 1 2 3 1
-	subq	$18,4,$18
-	 cmpult	$L1,$CC,$CC	# 1 2 3 2
-	umulh	$A2,$19,$A2	# 2 2	#####
-	 addq	$A1,$CC,$CC	# 1 3 2 
-	addq	$17,32,$17
-	 addq	$L2,$CC,$L2	# 2 2 3 1
-	mulq	$A3,$19,$L3	# 3 2 1	#####
-	 cmpult	$L2,$CC,$CC	# 2 2 3 2
-	addq	$A2,$CC,$CC	# 2 3 2 
-	 addq	$16,32,$16
-	umulh	$A3,$19,$A3	# 3 2	#####
-	 stq	$L1,-32($16)	# 1 2 4
-	mulq	$A4,$19,$L4	# 4 2 1	#####
-	 addq	$L3,$CC,$L3	# 3 2 3 1
-	stq	$L2,-24($16)	# 2 2 4
-	 cmpult	$L3,$CC,$CC	# 3 2 3 2
-	umulh	$A4,$19,$A4	# 4 2	#####
-	 addq	$A3,$CC,$CC	# 3 3 2 
-	stq	$L3,-16($16)	# 3 2 4
-	 addq	$L4,$CC,$L4	# 4 2 3 1
-	cmpult	$L4,$CC,$CC	# 4 2 3 2
-
-	addq	$A4,$CC,$CC	# 4 3 2 
-
-	stq	$L4,-8($16)	# 4 2 4
-
-	blt	$18,$143
-
-	ldq	$A1,0($17)	# 1 1
-
-	br	$142
-
-	.align 4
-$145:
-	ldq	$A1,0($17)	# 4 1
-	mulq	$A1,$19,$L1	# 4 2 1
-	subq	$18,1,$18
-	umulh	$A1,$19,$A1	# 4 2
-	addq	$L1,$CC,$L1	# 4 2 3 1
-	 addq	$16,8,$16
-	cmpult	$L1,$CC,$CC	# 4 2 3 2
-	 addq	$17,8,$17
-	addq	$A1,$CC,$CC	# 4 3 2 
-	stq	$L1,-8($16)	# 4 2 4
-
-	bgt	$18,$145
-	ret	$31,($26),1	# else exit
-
-	.align 4
-$143:
-	addq	$18,4,$18
-	bgt	$18,$145	# goto tail code
-	ret	$31,($26),1	# else exit
-
-	.end bn_mul_words
-	.align 3
-	.globl bn_sqr_words
-	.ent bn_sqr_words
-bn_sqr_words:
-bn_sqr_words..ng:
-	.frame $30,0,$26,0
-	.prologue 0
-
-	subq	$18,4,$18
-	blt	$18,$543	# if we are -1, -2, -3 or -4 goto tail code
-	ldq	$A1,0($17)	# 1 1
-	.align 3
-$542:
-	mulq	$A1,$A1,$L1		######
-	 ldq	$A2,8($17)	# 1 1
-	subq	$18,4
- 	umulh	$A1,$A1,$R1		######
-	ldq	$A3,16($17)	# 1 1
-	mulq	$A2,$A2,$L2		######
-	ldq	$A4,24($17)	# 1 1
-	stq	$L1,0($16)	# r[0]
- 	umulh	$A2,$A2,$R2		######
-	stq	$R1,8($16)	# r[1]
-	mulq	$A3,$A3,$L3		######
-	stq	$L2,16($16)	# r[0]
- 	umulh	$A3,$A3,$R3		######
-	stq	$R2,24($16)	# r[1]
-	mulq	$A4,$A4,$L4		######
-	stq	$L3,32($16)	# r[0]
- 	umulh	$A4,$A4,$R4		######
-	stq	$R3,40($16)	# r[1]
-
- 	addq	$16,64,$16
- 	addq	$17,32,$17
-	stq	$L4,-16($16)	# r[0]
-	stq	$R4,-8($16)	# r[1]
-
-	blt	$18,$543
-	ldq	$A1,0($17)	# 1 1
- 	br 	$542
-
-$442:
-	ldq	$A1,0($17)   # a[0]
-	mulq	$A1,$A1,$L1  # a[0]*w low part       r2
-	addq	$16,16,$16
-	addq	$17,8,$17
-	subq	$18,1,$18
-        umulh	$A1,$A1,$R1  # a[0]*w high part       r3
-	stq	$L1,-16($16)   # r[0]
-        stq	$R1,-8($16)   # r[1]
-
-	bgt	$18,$442
-	ret	$31,($26),1	# else exit
-
-	.align 4
-$543:
-	addq	$18,4,$18
-	bgt	$18,$442	# goto tail code
-	ret	$31,($26),1	# else exit
-	.end bn_sqr_words
-
-	.align 3
-	.globl bn_add_words
-	.ent bn_add_words
-bn_add_words:
-bn_add_words..ng:
-	.frame $30,0,$26,0
-	.prologue 0
-
-	subq	$19,4,$19
-	bis	$31,$31,$CC	# carry = 0
-	blt	$19,$900
-	ldq	$L1,0($17)	# a[0]
-	ldq	$R1,0($18)	# b[1]
-	.align 3
-$901:
-	addq	$R1,$L1,$R1	# r=a+b;
-	 ldq	$L2,8($17)	# a[1]
-	cmpult	$R1,$L1,$O1	# did we overflow?
-	 ldq	$R2,8($18)	# b[1]
-	addq	$R1,$CC,$R1	# c+= overflow
-	 ldq	$L3,16($17)	# a[2]
-	cmpult	$R1,$CC,$CC	# overflow?
-	 ldq	$R3,16($18)	# b[2]
-	addq	$CC,$O1,$CC
-	 ldq	$L4,24($17)	# a[3]
-	addq	$R2,$L2,$R2	# r=a+b;
-	 ldq	$R4,24($18)	# b[3]
-	cmpult	$R2,$L2,$O2	# did we overflow?
-	 addq	$R3,$L3,$R3	# r=a+b;
-	addq	$R2,$CC,$R2	# c+= overflow
-	 cmpult	$R3,$L3,$O3	# did we overflow?
-	cmpult	$R2,$CC,$CC	# overflow?
-	 addq	$R4,$L4,$R4	# r=a+b;
-	addq	$CC,$O2,$CC
-	 cmpult	$R4,$L4,$O4	# did we overflow?
-	addq	$R3,$CC,$R3	# c+= overflow
-	 stq	$R1,0($16)	# r[0]=c
-	cmpult	$R3,$CC,$CC	# overflow?
-	 stq	$R2,8($16)	# r[1]=c
-	addq	$CC,$O3,$CC
-	 stq	$R3,16($16)	# r[2]=c
-	addq	$R4,$CC,$R4	# c+= overflow
-	 subq	$19,4,$19	# loop--
-	cmpult	$R4,$CC,$CC	# overflow?
-	 addq	$17,32,$17	# a++
-	addq	$CC,$O4,$CC
-	 stq	$R4,24($16)	# r[3]=c
-	addq	$18,32,$18	# b++
-	 addq	$16,32,$16	# r++
-
-	blt	$19,$900
-	 ldq	$L1,0($17)	# a[0]
-	ldq	$R1,0($18)	# b[1]
-	 br	$901
-	.align 4
-$945:
-	ldq	$L1,0($17)	# a[0]
-	 ldq	$R1,0($18)	# b[1]
-	addq	$R1,$L1,$R1	# r=a+b;
-	 subq	$19,1,$19	# loop--
-	addq	$R1,$CC,$R1	# c+= overflow
-	 addq	$17,8,$17	# a++
-	cmpult	$R1,$L1,$O1	# did we overflow?
-	 cmpult	$R1,$CC,$CC	# overflow?
-	addq	$18,8,$18	# b++
-	 stq	$R1,0($16)	# r[0]=c
-	addq	$CC,$O1,$CC
-	 addq	$16,8,$16	# r++
-
-	bgt	$19,$945
-	ret	$31,($26),1	# else exit
-
-$900:
-	addq	$19,4,$19
-	bgt	$19,$945	# goto tail code
-	ret	$31,($26),1	# else exit
-	.end bn_add_words
-
-	.align 3
-	.globl bn_sub_words
-	.ent bn_sub_words
-bn_sub_words:
-bn_sub_words..ng:
-	.frame $30,0,$26,0
-	.prologue 0
-
-	subq	$19,4,$19
-	bis	$31,$31,$CC	# carry = 0
- br	$800
-	blt	$19,$800
-	ldq	$L1,0($17)	# a[0]
-	ldq	$R1,0($18)	# b[1]
-	.align 3
-$801:
-	addq	$R1,$L1,$R1	# r=a+b;
-	 ldq	$L2,8($17)	# a[1]
-	cmpult	$R1,$L1,$O1	# did we overflow?
-	 ldq	$R2,8($18)	# b[1]
-	addq	$R1,$CC,$R1	# c+= overflow
-	 ldq	$L3,16($17)	# a[2]
-	cmpult	$R1,$CC,$CC	# overflow?
-	 ldq	$R3,16($18)	# b[2]
-	addq	$CC,$O1,$CC
-	 ldq	$L4,24($17)	# a[3]
-	addq	$R2,$L2,$R2	# r=a+b;
-	 ldq	$R4,24($18)	# b[3]
-	cmpult	$R2,$L2,$O2	# did we overflow?
-	 addq	$R3,$L3,$R3	# r=a+b;
-	addq	$R2,$CC,$R2	# c+= overflow
-	 cmpult	$R3,$L3,$O3	# did we overflow?
-	cmpult	$R2,$CC,$CC	# overflow?
-	 addq	$R4,$L4,$R4	# r=a+b;
-	addq	$CC,$O2,$CC
-	 cmpult	$R4,$L4,$O4	# did we overflow?
-	addq	$R3,$CC,$R3	# c+= overflow
-	 stq	$R1,0($16)	# r[0]=c
-	cmpult	$R3,$CC,$CC	# overflow?
-	 stq	$R2,8($16)	# r[1]=c
-	addq	$CC,$O3,$CC
-	 stq	$R3,16($16)	# r[2]=c
-	addq	$R4,$CC,$R4	# c+= overflow
-	 subq	$19,4,$19	# loop--
-	cmpult	$R4,$CC,$CC	# overflow?
-	 addq	$17,32,$17	# a++
-	addq	$CC,$O4,$CC
-	 stq	$R4,24($16)	# r[3]=c
-	addq	$18,32,$18	# b++
-	 addq	$16,32,$16	# r++
-
-	blt	$19,$800
-	 ldq	$L1,0($17)	# a[0]
-	ldq	$R1,0($18)	# b[1]
-	 br	$801
-	.align 4
-$845:
-	ldq	$L1,0($17)	# a[0]
-	 ldq	$R1,0($18)	# b[1]
-	cmpult	$L1,$R1,$O1	# will we borrow?
-	 subq	$L1,$R1,$R1	# r=a-b;
-	subq	$19,1,$19	# loop--
-	 cmpult  $R1,$CC,$O2	# will we borrow?
-	subq	$R1,$CC,$R1	# c+= overflow
-	 addq	$17,8,$17	# a++
-	addq	$18,8,$18	# b++
-	 stq	$R1,0($16)	# r[0]=c
-	addq	$O2,$O1,$CC
-	 addq	$16,8,$16	# r++
-
-	bgt	$19,$845
-	ret	$31,($26),1	# else exit
-
-$800:
-	addq	$19,4,$19
-	bgt	$19,$845	# goto tail code
-	ret	$31,($26),1	# else exit
-	.end bn_sub_words
-
- #
- # What follows was taken directly from the C compiler with a few
- # hacks to redo the lables.
- #
-.text
-	.align 3
-	.globl bn_div_words
-	.ent bn_div_words
-bn_div_words:
-	ldgp $29,0($27)
-bn_div_words..ng:
-	lda $30,-48($30)
-	.frame $30,48,$26,0
-	stq $26,0($30)
-	stq $9,8($30)
-	stq $10,16($30)
-	stq $11,24($30)
-	stq $12,32($30)
-	stq $13,40($30)
-	.mask 0x4003e00,-48
-	.prologue 1
-	bis $16,$16,$9
-	bis $17,$17,$10
-	bis $18,$18,$11
-	bis $31,$31,$13
-	bis $31,2,$12
-	bne $11,$119
-	lda $0,-1
-	br $31,$136
-	.align 4
-$119:
-	bis $11,$11,$16
-	jsr $26,BN_num_bits_word
-	ldgp $29,0($26)
-	subq $0,64,$1
-	beq $1,$120
-	bis $31,1,$1
-	sll $1,$0,$1
-	cmpule $9,$1,$1
-	bne $1,$120
- #	lda $16,_IO_stderr_
- #	lda $17,$C32
- #	bis $0,$0,$18
- #	jsr $26,fprintf
- #	ldgp $29,0($26)
-	jsr $26,abort
-	ldgp $29,0($26)
-	.align 4
-$120:
-	bis $31,64,$3
-	cmpult $9,$11,$2
-	subq $3,$0,$1
-	addl $1,$31,$0
-	subq $9,$11,$1
-	cmoveq $2,$1,$9
-	beq $0,$122
-	zapnot $0,15,$2
-	subq $3,$0,$1
-	sll $11,$2,$11
-	sll $9,$2,$3
-	srl $10,$1,$1
-	sll $10,$2,$10
-	bis $3,$1,$9
-$122:
-	srl $11,32,$5
-	zapnot $11,15,$6
-	lda $7,-1
-	.align 5
-$123:
-	srl $9,32,$1
-	subq $1,$5,$1
-	bne $1,$126
-	zapnot $7,15,$27
-	br $31,$127
-	.align 4
-$126:
-	bis $9,$9,$24
-	bis $5,$5,$25
-	divqu $24,$25,$27
-$127:
-	srl $10,32,$4
-	.align 5
-$128:
-	mulq $27,$5,$1
-	subq $9,$1,$3
-	zapnot $3,240,$1
-	bne $1,$129
-	mulq $6,$27,$2
-	sll $3,32,$1
-	addq $1,$4,$1
-	cmpule $2,$1,$2
-	bne $2,$129
-	subq $27,1,$27
-	br $31,$128
-	.align 4
-$129:
-	mulq $27,$6,$1
-	mulq $27,$5,$4
-	srl $1,32,$3
-	sll $1,32,$1
-	addq $4,$3,$4
-	cmpult $10,$1,$2
-	subq $10,$1,$10
-	addq $2,$4,$2
-	cmpult $9,$2,$1
-	bis $2,$2,$4
-	beq $1,$134
-	addq $9,$11,$9
-	subq $27,1,$27
-$134:
-	subl $12,1,$12
-	subq $9,$4,$9
-	beq $12,$124
-	sll $27,32,$13
-	sll $9,32,$2
-	srl $10,32,$1
-	sll $10,32,$10
-	bis $2,$1,$9
-	br $31,$123
-	.align 4
-$124:
-	bis $13,$27,$0
-$136:
-	ldq $26,0($30)
-	ldq $9,8($30)
-	ldq $10,16($30)
-	ldq $11,24($30)
-	ldq $12,32($30)
-	ldq $13,40($30)
-	addq $30,48,$30
-	ret $31,($26),1
-	.end bn_div_words
-EOF
-	return($data);
-	}
-
diff --git a/crypto/openssl/crypto/bn/asm/ca.pl b/crypto/openssl/crypto/bn/asm/ca.pl
deleted file mode 100644
index c1ce67a6b4d5..000000000000
--- a/crypto/openssl/crypto/bn/asm/ca.pl
+++ /dev/null
@@ -1,33 +0,0 @@
-#!/usr/local/bin/perl
-# I have this in perl so I can use more usefull register names and then convert
-# them into alpha registers.
-#
-
-push(@INC,"perlasm","../../perlasm");
-require "alpha.pl";
-require "alpha/mul_add.pl";
-require "alpha/mul.pl";
-require "alpha/sqr.pl";
-require "alpha/add.pl";
-require "alpha/sub.pl";
-require "alpha/mul_c8.pl";
-require "alpha/mul_c4.pl";
-require "alpha/sqr_c4.pl";
-require "alpha/sqr_c8.pl";
-require "alpha/div.pl";
-
-&asm_init($ARGV[0],$0);
-
-&bn_mul_words("bn_mul_words");
-&bn_sqr_words("bn_sqr_words");
-&bn_mul_add_words("bn_mul_add_words");
-&bn_add_words("bn_add_words");
-&bn_sub_words("bn_sub_words");
-&bn_div_words("bn_div_words");
-&bn_mul_comba8("bn_mul_comba8");
-&bn_mul_comba4("bn_mul_comba4");
-&bn_sqr_comba4("bn_sqr_comba4");
-&bn_sqr_comba8("bn_sqr_comba8");
-
-&asm_finish();
-
diff --git a/crypto/openssl/crypto/bn/asm/co-586.pl b/crypto/openssl/crypto/bn/asm/co-586.pl
deleted file mode 100644
index 5d962cb957d3..000000000000
--- a/crypto/openssl/crypto/bn/asm/co-586.pl
+++ /dev/null
@@ -1,286 +0,0 @@
-#!/usr/local/bin/perl
-
-push(@INC,"perlasm","../../perlasm");
-require "x86asm.pl";
-
-&asm_init($ARGV[0],$0);
-
-&bn_mul_comba("bn_mul_comba8",8);
-&bn_mul_comba("bn_mul_comba4",4);
-&bn_sqr_comba("bn_sqr_comba8",8);
-&bn_sqr_comba("bn_sqr_comba4",4);
-
-&asm_finish();
-
-sub mul_add_c
-	{
-	local($a,$ai,$b,$bi,$c0,$c1,$c2,$pos,$i,$na,$nb)=@_;
-
-	# pos == -1 if eax and edx are pre-loaded, 0 to load from next
-	# words, and 1 if load return value
-
-	&comment("mul a[$ai]*b[$bi]");
-
-	# "eax" and "edx" will always be pre-loaded.
-	# &mov("eax",&DWP($ai*4,$a,"",0)) ;
-	# &mov("edx",&DWP($bi*4,$b,"",0));
-
-	&mul("edx");
-	&add($c0,"eax");
-	 &mov("eax",&DWP(($na)*4,$a,"",0)) if $pos == 0;	# laod next a
-	 &mov("eax",&wparam(0)) if $pos > 0;			# load r[]
-	 ###
-	&adc($c1,"edx");
-	 &mov("edx",&DWP(($nb)*4,$b,"",0)) if $pos == 0;	# laod next b
-	 &mov("edx",&DWP(($nb)*4,$b,"",0)) if $pos == 1;	# laod next b
-	 ###
-	&adc($c2,0);
-	 # is pos > 1, it means it is the last loop 
-	 &mov(&DWP($i*4,"eax","",0),$c0) if $pos > 0;		# save r[];
-	&mov("eax",&DWP(($na)*4,$a,"",0)) if $pos == 1;		# laod next a
-	}
-
-sub sqr_add_c
-	{
-	local($r,$a,$ai,$bi,$c0,$c1,$c2,$pos,$i,$na,$nb)=@_;
-
-	# pos == -1 if eax and edx are pre-loaded, 0 to load from next
-	# words, and 1 if load return value
-
-	&comment("sqr a[$ai]*a[$bi]");
-
-	# "eax" and "edx" will always be pre-loaded.
-	# &mov("eax",&DWP($ai*4,$a,"",0)) ;
-	# &mov("edx",&DWP($bi*4,$b,"",0));
-
-	if ($ai == $bi)
-		{ &mul("eax");}
-	else
-		{ &mul("edx");}
-	&add($c0,"eax");
-	 &mov("eax",&DWP(($na)*4,$a,"",0)) if $pos == 0;	# load next a
-	 ###
-	&adc($c1,"edx");
-	 &mov("edx",&DWP(($nb)*4,$a,"",0)) if ($pos == 1) && ($na != $nb);
-	 ###
-	&adc($c2,0);
-	 # is pos > 1, it means it is the last loop 
-	 &mov(&DWP($i*4,$r,"",0),$c0) if $pos > 0;		# save r[];
-	&mov("eax",&DWP(($na)*4,$a,"",0)) if $pos == 1;		# load next b
-	}
-
-sub sqr_add_c2
-	{
-	local($r,$a,$ai,$bi,$c0,$c1,$c2,$pos,$i,$na,$nb)=@_;
-
-	# pos == -1 if eax and edx are pre-loaded, 0 to load from next
-	# words, and 1 if load return value
-
-	&comment("sqr a[$ai]*a[$bi]");
-
-	# "eax" and "edx" will always be pre-loaded.
-	# &mov("eax",&DWP($ai*4,$a,"",0)) ;
-	# &mov("edx",&DWP($bi*4,$a,"",0));
-
-	if ($ai == $bi)
-		{ &mul("eax");}
-	else
-		{ &mul("edx");}
-	&add("eax","eax");
-	 ###
-	&adc("edx","edx");
-	 ###
-	&adc($c2,0);
-	 &add($c0,"eax");
-	&adc($c1,"edx");
-	 &mov("eax",&DWP(($na)*4,$a,"",0)) if $pos == 0;	# load next a
-	 &mov("eax",&DWP(($na)*4,$a,"",0)) if $pos == 1;	# load next b
-	&adc($c2,0);
-	&mov(&DWP($i*4,$r,"",0),$c0) if $pos > 0;		# save r[];
-	 &mov("edx",&DWP(($nb)*4,$a,"",0)) if ($pos <= 1) && ($na != $nb);
-	 ###
-	}
-
-sub bn_mul_comba
-	{
-	local($name,$num)=@_;
-	local($a,$b,$c0,$c1,$c2);
-	local($i,$as,$ae,$bs,$be,$ai,$bi);
-	local($tot,$end);
-
-	&function_begin_B($name,"");
-
-	$c0="ebx";
-	$c1="ecx";
-	$c2="ebp";
-	$a="esi";
-	$b="edi";
-	
-	$as=0;
-	$ae=0;
-	$bs=0;
-	$be=0;
-	$tot=$num+$num-1;
-
-	&push("esi");
-	 &mov($a,&wparam(1));
-	&push("edi");
-	 &mov($b,&wparam(2));
-	&push("ebp");
-	 &push("ebx");
-
-	&xor($c0,$c0);
-	 &mov("eax",&DWP(0,$a,"",0));	# load the first word 
-	&xor($c1,$c1);
-	 &mov("edx",&DWP(0,$b,"",0));	# load the first second 
-
-	for ($i=0; $i<$tot; $i++)
-		{
-		$ai=$as;
-		$bi=$bs;
-		$end=$be+1;
-
-		&comment("################## Calculate word $i"); 
-
-		for ($j=$bs; $j<$end; $j++)
-			{
-			&xor($c2,$c2) if ($j == $bs);
-			if (($j+1) == $end)
-				{
-				$v=1;
-				$v=2 if (($i+1) == $tot);
-				}
-			else
-				{ $v=0; }
-			if (($j+1) != $end)
-				{
-				$na=($ai-1);
-				$nb=($bi+1);
-				}
-			else
-				{
-				$na=$as+($i < ($num-1));
-				$nb=$bs+($i >= ($num-1));
-				}
-#printf STDERR "[$ai,$bi] -> [$na,$nb]\n";
-			&mul_add_c($a,$ai,$b,$bi,$c0,$c1,$c2,$v,$i,$na,$nb);
-			if ($v)
-				{
-				&comment("saved r[$i]");
-				# &mov("eax",&wparam(0));
-				# &mov(&DWP($i*4,"eax","",0),$c0);
-				($c0,$c1,$c2)=($c1,$c2,$c0);
-				}
-			$ai--;
-			$bi++;
-			}
-		$as++ if ($i < ($num-1));
-		$ae++ if ($i >= ($num-1));
-
-		$bs++ if ($i >= ($num-1));
-		$be++ if ($i < ($num-1));
-		}
-	&comment("save r[$i]");
-	# &mov("eax",&wparam(0));
-	&mov(&DWP($i*4,"eax","",0),$c0);
-
-	&pop("ebx");
-	&pop("ebp");
-	&pop("edi");
-	&pop("esi");
-	&ret();
-	&function_end_B($name);
-	}
-
-sub bn_sqr_comba
-	{
-	local($name,$num)=@_;
-	local($r,$a,$c0,$c1,$c2)=@_;
-	local($i,$as,$ae,$bs,$be,$ai,$bi);
-	local($b,$tot,$end,$half);
-
-	&function_begin_B($name,"");
-
-	$c0="ebx";
-	$c1="ecx";
-	$c2="ebp";
-	$a="esi";
-	$r="edi";
-
-	&push("esi");
-	 &push("edi");
-	&push("ebp");
-	 &push("ebx");
-	&mov($r,&wparam(0));
-	 &mov($a,&wparam(1));
-	&xor($c0,$c0);
-	 &xor($c1,$c1);
-	&mov("eax",&DWP(0,$a,"",0)); # load the first word
-
-	$as=0;
-	$ae=0;
-	$bs=0;
-	$be=0;
-	$tot=$num+$num-1;
-
-	for ($i=0; $i<$tot; $i++)
-		{
-		$ai=$as;
-		$bi=$bs;
-		$end=$be+1;
-
-		&comment("############### Calculate word $i");
-		for ($j=$bs; $j<$end; $j++)
-			{
-			&xor($c2,$c2) if ($j == $bs);
-			if (($ai-1) < ($bi+1))
-				{
-				$v=1;
-				$v=2 if ($i+1) == $tot;
-				}
-			else
-				{ $v=0; }
-			if (!$v)
-				{
-				$na=$ai-1;
-				$nb=$bi+1;
-				}
-			else
-				{
-				$na=$as+($i < ($num-1));
-				$nb=$bs+($i >= ($num-1));
-				}
-			if ($ai == $bi)
-				{
-				&sqr_add_c($r,$a,$ai,$bi,
-					$c0,$c1,$c2,$v,$i,$na,$nb);
-				}
-			else
-				{
-				&sqr_add_c2($r,$a,$ai,$bi,
-					$c0,$c1,$c2,$v,$i,$na,$nb);
-				}
-			if ($v)
-				{
-				&comment("saved r[$i]");
-				#&mov(&DWP($i*4,$r,"",0),$c0);
-				($c0,$c1,$c2)=($c1,$c2,$c0);
-				last;
-				}
-			$ai--;
-			$bi++;
-			}
-		$as++ if ($i < ($num-1));
-		$ae++ if ($i >= ($num-1));
-
-		$bs++ if ($i >= ($num-1));
-		$be++ if ($i < ($num-1));
-		}
-	&mov(&DWP($i*4,$r,"",0),$c0);
-	&pop("ebx");
-	&pop("ebp");
-	&pop("edi");
-	&pop("esi");
-	&ret();
-	&function_end_B($name);
-	}
diff --git a/crypto/openssl/crypto/bn/asm/co-alpha.pl b/crypto/openssl/crypto/bn/asm/co-alpha.pl
deleted file mode 100644
index 67dad3e3d5fb..000000000000
--- a/crypto/openssl/crypto/bn/asm/co-alpha.pl
+++ /dev/null
@@ -1,116 +0,0 @@
-#!/usr/local/bin/perl
-# I have this in perl so I can use more usefull register names and then convert
-# them into alpha registers.
-#
-
-push(@INC,"perlasm","../../perlasm");
-require "alpha.pl";
-
-&asm_init($ARGV[0],$0);
-
-print &bn_sub_words("bn_sub_words");
-
-&asm_finish();
-
-sub bn_sub_words
-	{
-	local($name)=@_;
-	local($cc,$a,$b,$r);
-
-	$cc="r0";
-	$a0="r1"; $b0="r5"; $r0="r9";  $tmp="r13";
-	$a1="r2"; $b1="r6"; $r1="r10"; $t1="r14";
-	$a2="r3"; $b2="r7"; $r2="r11";
-	$a3="r4"; $b3="r8"; $r3="r12"; $t3="r15";
-
-	$rp=&wparam(0);
-	$ap=&wparam(1);
-	$bp=&wparam(2);
-	$count=&wparam(3);
-
-	&function_begin($name,"");
-
-	&comment("");
-	&sub($count,4,$count);
-	&mov("zero",$cc);
-	&blt($count,&label("finish"));
-
-	&ld($a0,&QWPw(0,$ap));
-	&ld($b0,&QWPw(0,$bp));
-
-##########################################################
-	&set_label("loop");
-
-	&ld($a1,&QWPw(1,$ap));
-	 &cmpult($a0,$b0,$tmp);	# will we borrow?
-	&ld($b1,&QWPw(1,$bp));
-	 &sub($a0,$b0,$a0);		# do the subtract
-	&ld($a2,&QWPw(2,$ap));
-	 &cmpult($a0,$cc,$b0);	# will we borrow?
-	&ld($b2,&QWPw(2,$bp));
-	 &sub($a0,$cc,$a0);	# will we borrow?
-	&ld($a3,&QWPw(3,$ap));
-	 &add($b0,$tmp,$cc);	# add the borrows
-
-	&cmpult($a1,$b1,$t1);	# will we borrow?
-	 &sub($a1,$b1,$a1);	# do the subtract
-	&ld($b3,&QWPw(3,$bp));
-	 &cmpult($a1,$cc,$b1);	# will we borrow?
-	&sub($a1,$cc,$a1);	# will we borrow?
-	 &add($b1,$t1,$cc);	# add the borrows
-
-	&cmpult($a2,$b2,$tmp);	# will we borrow?
-	 &sub($a2,$b2,$a2);		# do the subtract
-	&st($a0,&QWPw(0,$rp));	# save
-	 &cmpult($a2,$cc,$b2);	# will we borrow?
-	&sub($a2,$cc,$a2);	# will we borrow?
-	 &add($b2,$tmp,$cc);	# add the borrows
-
-	&cmpult($a3,$b3,$t3);	# will we borrow?
-	 &sub($a3,$b3,$a3);		# do the subtract
-	&st($a1,&QWPw(1,$rp));	# save
-	 &cmpult($a3,$cc,$b3);	# will we borrow?
-	&sub($a3,$cc,$a3);	# will we borrow?
-	 &add($b3,$t3,$cc);	# add the borrows
-
-	&st($a2,&QWPw(2,$rp));	# save
-	 &sub($count,4,$count);	# count-=4
-	&st($a3,&QWPw(3,$rp));	# save
-	 &add($ap,4*$QWS,$ap);	# count+=4
-	&add($bp,4*$QWS,$bp);	# count+=4
-	 &add($rp,4*$QWS,$rp);	# count+=4
-
-	&blt($count,&label("finish"));
-	&ld($a0,&QWPw(0,$ap));
-	 &ld($b0,&QWPw(0,$bp));
-	&br(&label("loop"));
-##################################################
-	# Do the last 0..3 words
-
-	&set_label("last_loop");
-
-	&ld($a0,&QWPw(0,$ap));	# get a
-	 &ld($b0,&QWPw(0,$bp));	# get b
-	&cmpult($a0,$b0,$tmp);	# will we borrow?
-	&sub($a0,$b0,$a0);	# do the subtract
-	&cmpult($a0,$cc,$b0);	# will we borrow?
-	&sub($a0,$cc,$a0);	# will we borrow?
-	&st($a0,&QWPw(0,$rp));	# save
-	&add($b0,$tmp,$cc);	# add the borrows
-
-	&add($ap,$QWS,$ap);
-	&add($bp,$QWS,$bp);
-	&add($rp,$QWS,$rp);
-	&sub($count,1,$count);
-	&bgt($count,&label("last_loop"));
-	&function_end_A($name);
-
-######################################################
-	&set_label("finish");
-	&add($count,4,$count);
-	&bgt($count,&label("last_loop"));
-
-	&set_label("end");
-	&function_end($name);
-	}
-
diff --git a/crypto/openssl/crypto/bn/asm/ia64.S b/crypto/openssl/crypto/bn/asm/ia64.S
deleted file mode 100644
index 7b82b820e62a..000000000000
--- a/crypto/openssl/crypto/bn/asm/ia64.S
+++ /dev/null
@@ -1,1560 +0,0 @@
-.explicit
-.text
-.ident	"ia64.S, Version 2.1"
-.ident	"IA-64 ISA artwork by Andy Polyakov <appro@fy.chalmers.se>"
-
-//
-// ====================================================================
-// Written by Andy Polyakov <appro@fy.chalmers.se> for the OpenSSL
-// project.
-//
-// Rights for redistribution and usage in source and binary forms are
-// granted according to the OpenSSL license. Warranty of any kind is
-// disclaimed.
-// ====================================================================
-//
-// Version 2.x is Itanium2 re-tune. Few words about how Itanum2 is
-// different from Itanium to this module viewpoint. Most notably, is it
-// "wider" than Itanium? Can you experience loop scalability as
-// discussed in commentary sections? Not really:-( Itanium2 has 6
-// integer ALU ports, i.e. it's 2 ports wider, but it's not enough to
-// spin twice as fast, as I need 8 IALU ports. Amount of floating point
-// ports is the same, i.e. 2, while I need 4. In other words, to this
-// module Itanium2 remains effectively as "wide" as Itanium. Yet it's
-// essentially different in respect to this module, and a re-tune was
-// required. Well, because some intruction latencies has changed. Most
-// noticeably those intensively used:
-//
-//			Itanium	Itanium2
-//	ldf8		9	6		L2 hit
-//	ld8		2	1		L1 hit
-//	getf		2	5
-//	xma[->getf]	7[+1]	4[+0]
-//	add[->st8]	1[+1]	1[+0]
-//
-// What does it mean? You might ratiocinate that the original code
-// should run just faster... Because sum of latencies is smaller...
-// Wrong! Note that getf latency increased. This means that if a loop is
-// scheduled for lower latency (as they were), then it will suffer from
-// stall condition and the code will therefore turn anti-scalable, e.g.
-// original bn_mul_words spun at 5*n or 2.5 times slower than expected
-// on Itanium2! What to do? Reschedule loops for Itanium2? But then
-// Itanium would exhibit anti-scalability. So I've chosen to reschedule
-// for worst latency for every instruction aiming for best *all-round*
-// performance.  
-
-// Q.	How much faster does it get?
-// A.	Here is the output from 'openssl speed rsa dsa' for vanilla
-//	0.9.6a compiled with gcc version 2.96 20000731 (Red Hat
-//	Linux 7.1 2.96-81):
-//
-//	                  sign    verify    sign/s verify/s
-//	rsa  512 bits   0.0036s   0.0003s    275.3   2999.2
-//	rsa 1024 bits   0.0203s   0.0011s     49.3    894.1
-//	rsa 2048 bits   0.1331s   0.0040s      7.5    250.9
-//	rsa 4096 bits   0.9270s   0.0147s      1.1     68.1
-//	                  sign    verify    sign/s verify/s
-//	dsa  512 bits   0.0035s   0.0043s    288.3    234.8
-//	dsa 1024 bits   0.0111s   0.0135s     90.0     74.2
-//
-//	And here is similar output but for this assembler
-//	implementation:-)
-//
-//	                  sign    verify    sign/s verify/s
-//	rsa  512 bits   0.0021s   0.0001s    549.4   9638.5
-//	rsa 1024 bits   0.0055s   0.0002s    183.8   4481.1
-//	rsa 2048 bits   0.0244s   0.0006s     41.4   1726.3
-//	rsa 4096 bits   0.1295s   0.0018s      7.7    561.5
-//	                  sign    verify    sign/s verify/s
-//	dsa  512 bits   0.0012s   0.0013s    891.9    756.6
-//	dsa 1024 bits   0.0023s   0.0028s    440.4    376.2
-//	
-//	Yes, you may argue that it's not fair comparison as it's
-//	possible to craft the C implementation with BN_UMULT_HIGH
-//	inline assembler macro. But of course! Here is the output
-//	with the macro:
-//
-//	                  sign    verify    sign/s verify/s
-//	rsa  512 bits   0.0020s   0.0002s    495.0   6561.0
-//	rsa 1024 bits   0.0086s   0.0004s    116.2   2235.7
-//	rsa 2048 bits   0.0519s   0.0015s     19.3    667.3
-//	rsa 4096 bits   0.3464s   0.0053s      2.9    187.7
-//	                  sign    verify    sign/s verify/s
-//	dsa  512 bits   0.0016s   0.0020s    613.1    510.5
-//	dsa 1024 bits   0.0045s   0.0054s    221.0    183.9
-//
-//	My code is still way faster, huh:-) And I believe that even
-//	higher performance can be achieved. Note that as keys get
-//	longer, performance gain is larger. Why? According to the
-//	profiler there is another player in the field, namely
-//	BN_from_montgomery consuming larger and larger portion of CPU
-//	time as keysize decreases. I therefore consider putting effort
-//	to assembler implementation of the following routine:
-//
-//	void bn_mul_add_mont (BN_ULONG *rp,BN_ULONG *np,int nl,BN_ULONG n0)
-//	{
-//	int      i,j;
-//	BN_ULONG v;
-//
-//	for (i=0; i<nl; i++)
-//		{
-//		v=bn_mul_add_words(rp,np,nl,(rp[0]*n0)&BN_MASK2);
-//		nrp++;
-//		rp++;
-//		if (((nrp[-1]+=v)&BN_MASK2) < v)
-//			for (j=0; ((++nrp[j])&BN_MASK2) == 0; j++) ;
-//		}
-//	}
-//
-//	It might as well be beneficial to implement even combaX
-//	variants, as it appears as it can literally unleash the
-//	performance (see comment section to bn_mul_comba8 below).
-//
-//	And finally for your reference the output for 0.9.6a compiled
-//	with SGIcc version 0.01.0-12 (keep in mind that for the moment
-//	of this writing it's not possible to convince SGIcc to use
-//	BN_UMULT_HIGH inline assembler macro, yet the code is fast,
-//	i.e. for a compiler generated one:-):
-//
-//	                  sign    verify    sign/s verify/s
-//	rsa  512 bits   0.0022s   0.0002s    452.7   5894.3
-//	rsa 1024 bits   0.0097s   0.0005s    102.7   2002.9
-//	rsa 2048 bits   0.0578s   0.0017s     17.3    600.2
-//	rsa 4096 bits   0.3838s   0.0061s      2.6    164.5
-//	                  sign    verify    sign/s verify/s
-//	dsa  512 bits   0.0018s   0.0022s    547.3    459.6
-//	dsa 1024 bits   0.0051s   0.0062s    196.6    161.3
-//
-//	Oh! Benchmarks were performed on 733MHz Lion-class Itanium
-//	system running Redhat Linux 7.1 (very special thanks to Ray
-//	McCaffity of Williams Communications for providing an account).
-//
-// Q.	What's the heck with 'rum 1<<5' at the end of every function?
-// A.	Well, by clearing the "upper FP registers written" bit of the
-//	User Mask I want to excuse the kernel from preserving upper
-//	(f32-f128) FP register bank over process context switch, thus
-//	minimizing bus bandwidth consumption during the switch (i.e.
-//	after PKI opration completes and the program is off doing
-//	something else like bulk symmetric encryption). Having said
-//	this, I also want to point out that it might be good idea
-//	to compile the whole toolkit (as well as majority of the
-//	programs for that matter) with -mfixed-range=f32-f127 command
-//	line option. No, it doesn't prevent the compiler from writing
-//	to upper bank, but at least discourages to do so. If you don't
-//	like the idea you have the option to compile the module with
-//	-Drum=nop.m in command line.
-//
-
-#if defined(_HPUX_SOURCE) && !defined(_LP64)
-#define	ADDP	addp4
-#else
-#define	ADDP	add
-#endif
-
-#if 1
-//
-// bn_[add|sub]_words routines.
-//
-// Loops are spinning in 2*(n+5) ticks on Itanuim (provided that the
-// data reside in L1 cache, i.e. 2 ticks away). It's possible to
-// compress the epilogue and get down to 2*n+6, but at the cost of
-// scalability (the neat feature of this implementation is that it
-// shall automagically spin in n+5 on "wider" IA-64 implementations:-)
-// I consider that the epilogue is short enough as it is to trade tiny
-// performance loss on Itanium for scalability.
-//
-// BN_ULONG bn_add_words(BN_ULONG *rp, BN_ULONG *ap, BN_ULONG *bp,int num)
-//
-.global	bn_add_words#
-.proc	bn_add_words#
-.align	64
-.skip	32	// makes the loop body aligned at 64-byte boundary
-bn_add_words:
-	.prologue
-	.fframe	0
-	.save	ar.pfs,r2
-{ .mii;	alloc		r2=ar.pfs,4,12,0,16
-	cmp4.le		p6,p0=r35,r0	};;
-{ .mfb;	mov		r8=r0			// return value
-(p6)	br.ret.spnt.many	b0	};;
-
-	.save	ar.lc,r3
-{ .mib;	sub		r10=r35,r0,1
-	mov		r3=ar.lc
-	brp.loop.imp	.L_bn_add_words_ctop,.L_bn_add_words_cend-16
-					}
-	.body
-{ .mib;	ADDP		r14=0,r32		// rp
-	mov		r9=pr		};;
-{ .mii;	ADDP		r15=0,r33		// ap
-	mov		ar.lc=r10
-	mov		ar.ec=6		}
-{ .mib;	ADDP		r16=0,r34		// bp
-	mov		pr.rot=1<<16	};;
-
-.L_bn_add_words_ctop:
-{ .mii;	(p16)	ld8		r32=[r16],8	  // b=*(bp++)
-	(p18)	add		r39=r37,r34
-	(p19)	cmp.ltu.unc	p56,p0=r40,r38	}
-{ .mfb;	(p0)	nop.m		0x0
-	(p0)	nop.f		0x0
-	(p0)	nop.b		0x0		}
-{ .mii;	(p16)	ld8		r35=[r15],8	  // a=*(ap++)
-	(p58)	cmp.eq.or	p57,p0=-1,r41	  // (p20)
-	(p58)	add		r41=1,r41	} // (p20)
-{ .mfb;	(p21)	st8		[r14]=r42,8	  // *(rp++)=r
-	(p0)	nop.f		0x0
-	br.ctop.sptk	.L_bn_add_words_ctop	};;
-.L_bn_add_words_cend:
-
-{ .mii;
-(p59)	add		r8=1,r8		// return value
-	mov		pr=r9,0x1ffff
-	mov		ar.lc=r3	}
-{ .mbb;	nop.b		0x0
-	br.ret.sptk.many	b0	};;
-.endp	bn_add_words#
-
-//
-// BN_ULONG bn_sub_words(BN_ULONG *rp, BN_ULONG *ap, BN_ULONG *bp,int num)
-//
-.global	bn_sub_words#
-.proc	bn_sub_words#
-.align	64
-.skip	32	// makes the loop body aligned at 64-byte boundary
-bn_sub_words:
-	.prologue
-	.fframe	0
-	.save	ar.pfs,r2
-{ .mii;	alloc		r2=ar.pfs,4,12,0,16
-	cmp4.le		p6,p0=r35,r0	};;
-{ .mfb;	mov		r8=r0			// return value
-(p6)	br.ret.spnt.many	b0	};;
-
-	.save	ar.lc,r3
-{ .mib;	sub		r10=r35,r0,1
-	mov		r3=ar.lc
-	brp.loop.imp	.L_bn_sub_words_ctop,.L_bn_sub_words_cend-16
-					}
-	.body
-{ .mib;	ADDP		r14=0,r32		// rp
-	mov		r9=pr		};;
-{ .mii;	ADDP		r15=0,r33		// ap
-	mov		ar.lc=r10
-	mov		ar.ec=6		}
-{ .mib;	ADDP		r16=0,r34		// bp
-	mov		pr.rot=1<<16	};;
-
-.L_bn_sub_words_ctop:
-{ .mii;	(p16)	ld8		r32=[r16],8	  // b=*(bp++)
-	(p18)	sub		r39=r37,r34
-	(p19)	cmp.gtu.unc	p56,p0=r40,r38	}
-{ .mfb;	(p0)	nop.m		0x0
-	(p0)	nop.f		0x0
-	(p0)	nop.b		0x0		}
-{ .mii;	(p16)	ld8		r35=[r15],8	  // a=*(ap++)
-	(p58)	cmp.eq.or	p57,p0=0,r41	  // (p20)
-	(p58)	add		r41=-1,r41	} // (p20)
-{ .mbb;	(p21)	st8		[r14]=r42,8	  // *(rp++)=r
-	(p0)	nop.b		0x0
-	br.ctop.sptk	.L_bn_sub_words_ctop	};;
-.L_bn_sub_words_cend:
-
-{ .mii;
-(p59)	add		r8=1,r8		// return value
-	mov		pr=r9,0x1ffff
-	mov		ar.lc=r3	}
-{ .mbb;	nop.b		0x0
-	br.ret.sptk.many	b0	};;
-.endp	bn_sub_words#
-#endif
-
-#if 0
-#define XMA_TEMPTATION
-#endif
-
-#if 1
-//
-// BN_ULONG bn_mul_words(BN_ULONG *rp, BN_ULONG *ap, int num, BN_ULONG w)
-//
-.global	bn_mul_words#
-.proc	bn_mul_words#
-.align	64
-.skip	32	// makes the loop body aligned at 64-byte boundary
-bn_mul_words:
-	.prologue
-	.fframe	0
-	.save	ar.pfs,r2
-#ifdef XMA_TEMPTATION
-{ .mfi;	alloc		r2=ar.pfs,4,0,0,0	};;
-#else
-{ .mfi;	alloc		r2=ar.pfs,4,12,0,16	};;
-#endif
-{ .mib;	mov		r8=r0			// return value
-	cmp4.le		p6,p0=r34,r0
-(p6)	br.ret.spnt.many	b0		};;
-
-	.save	ar.lc,r3
-{ .mii;	sub	r10=r34,r0,1
-	mov	r3=ar.lc
-	mov	r9=pr			};;
-
-	.body
-{ .mib;	setf.sig	f8=r35	// w
-	mov		pr.rot=0x800001<<16
-			// ------^----- serves as (p50) at first (p27)
-	brp.loop.imp	.L_bn_mul_words_ctop,.L_bn_mul_words_cend-16
-					}
-
-#ifndef XMA_TEMPTATION
-
-{ .mmi;	ADDP		r14=0,r32	// rp
-	ADDP		r15=0,r33	// ap
-	mov		ar.lc=r10	}
-{ .mmi;	mov		r40=0		// serves as r35 at first (p27)
-	mov		ar.ec=13	};;
-
-// This loop spins in 2*(n+12) ticks. It's scheduled for data in Itanium
-// L2 cache (i.e. 9 ticks away) as floating point load/store instructions
-// bypass L1 cache and L2 latency is actually best-case scenario for
-// ldf8. The loop is not scalable and shall run in 2*(n+12) even on
-// "wider" IA-64 implementations. It's a trade-off here. n+24 loop
-// would give us ~5% in *overall* performance improvement on "wider"
-// IA-64, but would hurt Itanium for about same because of longer
-// epilogue. As it's a matter of few percents in either case I've
-// chosen to trade the scalability for development time (you can see
-// this very instruction sequence in bn_mul_add_words loop which in
-// turn is scalable).
-.L_bn_mul_words_ctop:
-{ .mfi;	(p25)	getf.sig	r36=f52			// low
-	(p21)	xmpy.lu		f48=f37,f8
-	(p28)	cmp.ltu		p54,p50=r41,r39	}
-{ .mfi;	(p16)	ldf8		f32=[r15],8
-	(p21)	xmpy.hu		f40=f37,f8
-	(p0)	nop.i		0x0		};;
-{ .mii;	(p25)	getf.sig	r32=f44			// high
-	.pred.rel	"mutex",p50,p54
-	(p50)	add		r40=r38,r35		// (p27)
-	(p54)	add		r40=r38,r35,1	}	// (p27)
-{ .mfb;	(p28)	st8		[r14]=r41,8
-	(p0)	nop.f		0x0
-	br.ctop.sptk	.L_bn_mul_words_ctop	};;
-.L_bn_mul_words_cend:
-
-{ .mii;	nop.m		0x0
-.pred.rel	"mutex",p51,p55
-(p51)	add		r8=r36,r0
-(p55)	add		r8=r36,r0,1	}
-{ .mfb;	nop.m	0x0
-	nop.f	0x0
-	nop.b	0x0			}
-
-#else	// XMA_TEMPTATION
-
-	setf.sig	f37=r0	// serves as carry at (p18) tick
-	mov		ar.lc=r10
-	mov		ar.ec=5;;
-
-// Most of you examining this code very likely wonder why in the name
-// of Intel the following loop is commented out? Indeed, it looks so
-// neat that you find it hard to believe that it's something wrong
-// with it, right? The catch is that every iteration depends on the
-// result from previous one and the latter isn't available instantly.
-// The loop therefore spins at the latency of xma minus 1, or in other
-// words at 6*(n+4) ticks:-( Compare to the "production" loop above
-// that runs in 2*(n+11) where the low latency problem is worked around
-// by moving the dependency to one-tick latent interger ALU. Note that
-// "distance" between ldf8 and xma is not latency of ldf8, but the
-// *difference* between xma and ldf8 latencies.
-.L_bn_mul_words_ctop:
-{ .mfi;	(p16)	ldf8		f32=[r33],8
-	(p18)	xma.hu		f38=f34,f8,f39	}
-{ .mfb;	(p20)	stf8		[r32]=f37,8
-	(p18)	xma.lu		f35=f34,f8,f39
-	br.ctop.sptk	.L_bn_mul_words_ctop	};;
-.L_bn_mul_words_cend:
-
-	getf.sig	r8=f41		// the return value
-
-#endif	// XMA_TEMPTATION
-
-{ .mii;	nop.m		0x0
-	mov		pr=r9,0x1ffff
-	mov		ar.lc=r3	}
-{ .mfb;	rum		1<<5		// clear um.mfh
-	nop.f		0x0
-	br.ret.sptk.many	b0	};;
-.endp	bn_mul_words#
-#endif
-
-#if 1
-//
-// BN_ULONG bn_mul_add_words(BN_ULONG *rp, BN_ULONG *ap, int num, BN_ULONG w)
-//
-.global	bn_mul_add_words#
-.proc	bn_mul_add_words#
-.align	64
-.skip	48	// makes the loop body aligned at 64-byte boundary
-bn_mul_add_words:
-	.prologue
-	.fframe	0
-	.save	ar.pfs,r2
-	.save	ar.lc,r3
-	.save	pr,r9
-{ .mmi;	alloc		r2=ar.pfs,4,4,0,8
-	cmp4.le		p6,p0=r34,r0
-	mov		r3=ar.lc	};;
-{ .mib;	mov		r8=r0		// return value
-	sub		r10=r34,r0,1
-(p6)	br.ret.spnt.many	b0	};;
-
-	.body
-{ .mib;	setf.sig	f8=r35		// w
-	mov		r9=pr
-	brp.loop.imp	.L_bn_mul_add_words_ctop,.L_bn_mul_add_words_cend-16
-					}
-{ .mmi;	ADDP		r14=0,r32	// rp
-	ADDP		r15=0,r33	// ap
-	mov		ar.lc=r10	}
-{ .mii;	ADDP		r16=0,r32	// rp copy
-	mov		pr.rot=0x2001<<16
-			// ------^----- serves as (p40) at first (p27)
-	mov		ar.ec=11	};;
-
-// This loop spins in 3*(n+10) ticks on Itanium and in 2*(n+10) on
-// Itanium 2. Yes, unlike previous versions it scales:-) Previous
-// version was peforming *all* additions in IALU and was starving
-// for those even on Itanium 2. In this version one addition is
-// moved to FPU and is folded with multiplication. This is at cost
-// of propogating the result from previous call to this subroutine
-// to L2 cache... In other words negligible even for shorter keys.
-// *Overall* performance improvement [over previous version] varies
-// from 11 to 22 percent depending on key length.
-.L_bn_mul_add_words_ctop:
-.pred.rel	"mutex",p40,p42
-{ .mfi;	(p23)	getf.sig	r36=f45			// low
-	(p20)	xma.lu		f42=f36,f8,f50		// low
-	(p40)	add		r39=r39,r35	}	// (p27)
-{ .mfi;	(p16)	ldf8		f32=[r15],8		// *(ap++)
-	(p20)	xma.hu		f36=f36,f8,f50		// high
-	(p42)	add		r39=r39,r35,1	};;	// (p27)
-{ .mmi;	(p24)	getf.sig	r32=f40			// high
-	(p16)	ldf8		f46=[r16],8		// *(rp1++)
-	(p40)	cmp.ltu		p41,p39=r39,r35	}	// (p27)
-{ .mib;	(p26)	st8		[r14]=r39,8		// *(rp2++)
-	(p42)	cmp.leu		p41,p39=r39,r35		// (p27)
-	br.ctop.sptk	.L_bn_mul_add_words_ctop};;
-.L_bn_mul_add_words_cend:
-
-{ .mmi;	.pred.rel	"mutex",p40,p42
-(p40)	add		r8=r35,r0
-(p42)	add		r8=r35,r0,1
-	mov		pr=r9,0x1ffff	}
-{ .mib;	rum		1<<5		// clear um.mfh
-	mov		ar.lc=r3
-	br.ret.sptk.many	b0	};;
-.endp	bn_mul_add_words#
-#endif
-
-#if 1
-//
-// void bn_sqr_words(BN_ULONG *rp, BN_ULONG *ap, int num)
-//
-.global	bn_sqr_words#
-.proc	bn_sqr_words#
-.align	64
-.skip	32	// makes the loop body aligned at 64-byte boundary 
-bn_sqr_words:
-	.prologue
-	.fframe	0
-	.save	ar.pfs,r2
-{ .mii;	alloc		r2=ar.pfs,3,0,0,0
-	sxt4		r34=r34		};;
-{ .mii;	cmp.le		p6,p0=r34,r0
-	mov		r8=r0		}	// return value
-{ .mfb;	ADDP		r32=0,r32
-	nop.f		0x0
-(p6)	br.ret.spnt.many	b0	};;
-
-	.save	ar.lc,r3
-{ .mii;	sub	r10=r34,r0,1
-	mov	r3=ar.lc
-	mov	r9=pr			};;
-
-	.body
-{ .mib;	ADDP		r33=0,r33
-	mov		pr.rot=1<<16
-	brp.loop.imp	.L_bn_sqr_words_ctop,.L_bn_sqr_words_cend-16
-					}
-{ .mii;	add		r34=8,r32
-	mov		ar.lc=r10
-	mov		ar.ec=18	};;
-
-// 2*(n+17) on Itanium, (n+17) on "wider" IA-64 implementations. It's
-// possible to compress the epilogue (I'm getting tired to write this
-// comment over and over) and get down to 2*n+16 at the cost of
-// scalability. The decision will very likely be reconsidered after the
-// benchmark program is profiled. I.e. if perfomance gain on Itanium
-// will appear larger than loss on "wider" IA-64, then the loop should
-// be explicitely split and the epilogue compressed.
-.L_bn_sqr_words_ctop:
-{ .mfi;	(p16)	ldf8		f32=[r33],8
-	(p25)	xmpy.lu		f42=f41,f41
-	(p0)	nop.i		0x0		}
-{ .mib;	(p33)	stf8		[r32]=f50,16
-	(p0)	nop.i		0x0
-	(p0)	nop.b		0x0		}
-{ .mfi;	(p0)	nop.m		0x0
-	(p25)	xmpy.hu		f52=f41,f41
-	(p0)	nop.i		0x0		}
-{ .mib;	(p33)	stf8		[r34]=f60,16
-	(p0)	nop.i		0x0
-	br.ctop.sptk	.L_bn_sqr_words_ctop	};;
-.L_bn_sqr_words_cend:
-
-{ .mii;	nop.m		0x0
-	mov		pr=r9,0x1ffff
-	mov		ar.lc=r3	}
-{ .mfb;	rum		1<<5		// clear um.mfh
-	nop.f		0x0
-	br.ret.sptk.many	b0	};;
-.endp	bn_sqr_words#
-#endif
-
-#if 1
-// Apparently we win nothing by implementing special bn_sqr_comba8.
-// Yes, it is possible to reduce the number of multiplications by
-// almost factor of two, but then the amount of additions would
-// increase by factor of two (as we would have to perform those
-// otherwise performed by xma ourselves). Normally we would trade
-// anyway as multiplications are way more expensive, but not this
-// time... Multiplication kernel is fully pipelined and as we drain
-// one 128-bit multiplication result per clock cycle multiplications
-// are effectively as inexpensive as additions. Special implementation
-// might become of interest for "wider" IA-64 implementation as you'll
-// be able to get through the multiplication phase faster (there won't
-// be any stall issues as discussed in the commentary section below and
-// you therefore will be able to employ all 4 FP units)... But these
-// Itanium days it's simply too hard to justify the effort so I just
-// drop down to bn_mul_comba8 code:-)
-//
-// void bn_sqr_comba8(BN_ULONG *r, BN_ULONG *a)
-//
-.global	bn_sqr_comba8#
-.proc	bn_sqr_comba8#
-.align	64
-bn_sqr_comba8:
-	.prologue
-	.fframe	0
-	.save	ar.pfs,r2
-#if defined(_HPUX_SOURCE) && !defined(_LP64)
-{ .mii;	alloc	r2=ar.pfs,2,1,0,0
-	addp4	r33=0,r33
-	addp4	r32=0,r32		};;
-{ .mii;
-#else
-{ .mii;	alloc	r2=ar.pfs,2,1,0,0
-#endif
-	mov	r34=r33
-	add	r14=8,r33		};;
-	.body
-{ .mii;	add	r17=8,r34
-	add	r15=16,r33
-	add	r18=16,r34		}
-{ .mfb;	add	r16=24,r33
-	br	.L_cheat_entry_point8	};;
-.endp	bn_sqr_comba8#
-#endif
-
-#if 1
-// I've estimated this routine to run in ~120 ticks, but in reality
-// (i.e. according to ar.itc) it takes ~160 ticks. Are those extra
-// cycles consumed for instructions fetch? Or did I misinterpret some
-// clause in Itanium µ-architecture manual? Comments are welcomed and
-// highly appreciated.
-//
-// On Itanium 2 it takes ~190 ticks. This is because of stalls on
-// result from getf.sig. I do nothing about it at this point for
-// reasons depicted below.
-//
-// However! It should be noted that even 160 ticks is darn good result
-// as it's over 10 (yes, ten, spelled as t-e-n) times faster than the
-// C version (compiled with gcc with inline assembler). I really
-// kicked compiler's butt here, didn't I? Yeah! This brings us to the
-// following statement. It's damn shame that this routine isn't called
-// very often nowadays! According to the profiler most CPU time is
-// consumed by bn_mul_add_words called from BN_from_montgomery. In
-// order to estimate what we're missing, I've compared the performance
-// of this routine against "traditional" implementation, i.e. against
-// following routine:
-//
-// void bn_mul_comba8(BN_ULONG *r, BN_ULONG *a, BN_ULONG *b)
-// {	r[ 8]=bn_mul_words(    &(r[0]),a,8,b[0]);
-//	r[ 9]=bn_mul_add_words(&(r[1]),a,8,b[1]);
-//	r[10]=bn_mul_add_words(&(r[2]),a,8,b[2]);
-//	r[11]=bn_mul_add_words(&(r[3]),a,8,b[3]);
-//	r[12]=bn_mul_add_words(&(r[4]),a,8,b[4]);
-//	r[13]=bn_mul_add_words(&(r[5]),a,8,b[5]);
-//	r[14]=bn_mul_add_words(&(r[6]),a,8,b[6]);
-//	r[15]=bn_mul_add_words(&(r[7]),a,8,b[7]);
-// }
-//
-// The one below is over 8 times faster than the one above:-( Even
-// more reasons to "combafy" bn_mul_add_mont...
-//
-// And yes, this routine really made me wish there were an optimizing
-// assembler! It also feels like it deserves a dedication.
-//
-//	To my wife for being there and to my kids...
-//
-// void bn_mul_comba8(BN_ULONG *r, BN_ULONG *a, BN_ULONG *b)
-//
-#define	carry1	r14
-#define	carry2	r15
-#define	carry3	r34
-.global	bn_mul_comba8#
-.proc	bn_mul_comba8#
-.align	64
-bn_mul_comba8:
-	.prologue
-	.fframe	0
-	.save	ar.pfs,r2
-#if defined(_HPUX_SOURCE) && !defined(_LP64)
-{ .mii;	alloc	r2=ar.pfs,3,0,0,0
-	addp4	r33=0,r33
-	addp4	r34=0,r34		};;
-{ .mii;	addp4	r32=0,r32
-#else
-{ .mii;	alloc   r2=ar.pfs,3,0,0,0
-#endif
-	add	r14=8,r33
-	add	r17=8,r34		}
-	.body
-{ .mii;	add	r15=16,r33
-	add	r18=16,r34
-	add	r16=24,r33		}
-.L_cheat_entry_point8:
-{ .mmi;	add	r19=24,r34
-
-	ldf8	f32=[r33],32		};;
-
-{ .mmi;	ldf8	f120=[r34],32
-	ldf8	f121=[r17],32		}
-{ .mmi;	ldf8	f122=[r18],32
-	ldf8	f123=[r19],32		};;
-{ .mmi;	ldf8	f124=[r34]
-	ldf8	f125=[r17]		}
-{ .mmi;	ldf8	f126=[r18]
-	ldf8	f127=[r19]		}
-
-{ .mmi;	ldf8	f33=[r14],32
-	ldf8	f34=[r15],32		}
-{ .mmi;	ldf8	f35=[r16],32;;
-	ldf8	f36=[r33]		}
-{ .mmi;	ldf8	f37=[r14]
-	ldf8	f38=[r15]		}
-{ .mfi;	ldf8	f39=[r16]
-// -------\ Entering multiplier's heaven /-------
-// ------------\                    /------------
-// -----------------\          /-----------------
-// ----------------------\/----------------------
-		xma.hu	f41=f32,f120,f0		}
-{ .mfi;		xma.lu	f40=f32,f120,f0		};; // (*)
-{ .mfi;		xma.hu	f51=f32,f121,f0		}
-{ .mfi;		xma.lu	f50=f32,f121,f0		};;
-{ .mfi;		xma.hu	f61=f32,f122,f0		}
-{ .mfi;		xma.lu	f60=f32,f122,f0		};;
-{ .mfi;		xma.hu	f71=f32,f123,f0		}
-{ .mfi;		xma.lu	f70=f32,f123,f0		};;
-{ .mfi;		xma.hu	f81=f32,f124,f0		}
-{ .mfi;		xma.lu	f80=f32,f124,f0		};;
-{ .mfi;		xma.hu	f91=f32,f125,f0		}
-{ .mfi;		xma.lu	f90=f32,f125,f0		};;
-{ .mfi;		xma.hu	f101=f32,f126,f0	}
-{ .mfi;		xma.lu	f100=f32,f126,f0	};;
-{ .mfi;		xma.hu	f111=f32,f127,f0	}
-{ .mfi;		xma.lu	f110=f32,f127,f0	};;//
-// (*)	You can argue that splitting at every second bundle would
-//	prevent "wider" IA-64 implementations from achieving the peak
-//	performance. Well, not really... The catch is that if you
-//	intend to keep 4 FP units busy by splitting at every fourth
-//	bundle and thus perform these 16 multiplications in 4 ticks,
-//	the first bundle *below* would stall because the result from
-//	the first xma bundle *above* won't be available for another 3
-//	ticks (if not more, being an optimist, I assume that "wider"
-//	implementation will have same latency:-). This stall will hold
-//	you back and the performance would be as if every second bundle
-//	were split *anyway*...
-{ .mfi;	getf.sig	r16=f40
-		xma.hu	f42=f33,f120,f41
-	add		r33=8,r32		}
-{ .mfi;		xma.lu	f41=f33,f120,f41	};;
-{ .mfi;	getf.sig	r24=f50
-		xma.hu	f52=f33,f121,f51	}
-{ .mfi;		xma.lu	f51=f33,f121,f51	};;
-{ .mfi;	st8		[r32]=r16,16
-		xma.hu	f62=f33,f122,f61	}
-{ .mfi;		xma.lu	f61=f33,f122,f61	};;
-{ .mfi;		xma.hu	f72=f33,f123,f71	}
-{ .mfi;		xma.lu	f71=f33,f123,f71	};;
-{ .mfi;		xma.hu	f82=f33,f124,f81	}
-{ .mfi;		xma.lu	f81=f33,f124,f81	};;
-{ .mfi;		xma.hu	f92=f33,f125,f91	}
-{ .mfi;		xma.lu	f91=f33,f125,f91	};;
-{ .mfi;		xma.hu	f102=f33,f126,f101	}
-{ .mfi;		xma.lu	f101=f33,f126,f101	};;
-{ .mfi;		xma.hu	f112=f33,f127,f111	}
-{ .mfi;		xma.lu	f111=f33,f127,f111	};;//
-//-------------------------------------------------//
-{ .mfi;	getf.sig	r25=f41
-		xma.hu	f43=f34,f120,f42	}
-{ .mfi;		xma.lu	f42=f34,f120,f42	};;
-{ .mfi;	getf.sig	r16=f60
-		xma.hu	f53=f34,f121,f52	}
-{ .mfi;		xma.lu	f52=f34,f121,f52	};;
-{ .mfi;	getf.sig	r17=f51
-		xma.hu	f63=f34,f122,f62
-	add		r25=r25,r24		}
-{ .mfi;		xma.lu	f62=f34,f122,f62
-	mov		carry1=0		};;
-{ .mfi;	cmp.ltu		p6,p0=r25,r24
-		xma.hu	f73=f34,f123,f72	}
-{ .mfi;		xma.lu	f72=f34,f123,f72	};;
-{ .mfi;	st8		[r33]=r25,16
-		xma.hu	f83=f34,f124,f82
-(p6)	add		carry1=1,carry1		}
-{ .mfi;		xma.lu	f82=f34,f124,f82	};;
-{ .mfi;		xma.hu	f93=f34,f125,f92	}
-{ .mfi;		xma.lu	f92=f34,f125,f92	};;
-{ .mfi;		xma.hu	f103=f34,f126,f102	}
-{ .mfi;		xma.lu	f102=f34,f126,f102	};;
-{ .mfi;		xma.hu	f113=f34,f127,f112	}
-{ .mfi;		xma.lu	f112=f34,f127,f112	};;//
-//-------------------------------------------------//
-{ .mfi;	getf.sig	r18=f42
-		xma.hu	f44=f35,f120,f43
-	add		r17=r17,r16		}
-{ .mfi;		xma.lu	f43=f35,f120,f43	};;
-{ .mfi;	getf.sig	r24=f70
-		xma.hu	f54=f35,f121,f53	}
-{ .mfi;	mov		carry2=0
-		xma.lu	f53=f35,f121,f53	};;
-{ .mfi;	getf.sig	r25=f61
-		xma.hu	f64=f35,f122,f63
-	cmp.ltu		p7,p0=r17,r16		}
-{ .mfi;	add		r18=r18,r17
-		xma.lu	f63=f35,f122,f63	};;
-{ .mfi;	getf.sig	r26=f52
-		xma.hu	f74=f35,f123,f73
-(p7)	add		carry2=1,carry2		}
-{ .mfi;	cmp.ltu		p7,p0=r18,r17
-		xma.lu	f73=f35,f123,f73
-	add		r18=r18,carry1		};;
-{ .mfi;
-		xma.hu	f84=f35,f124,f83
-(p7)	add		carry2=1,carry2		}
-{ .mfi;	cmp.ltu		p7,p0=r18,carry1
-		xma.lu	f83=f35,f124,f83	};;
-{ .mfi;	st8		[r32]=r18,16
-		xma.hu	f94=f35,f125,f93
-(p7)	add		carry2=1,carry2		}
-{ .mfi;		xma.lu	f93=f35,f125,f93	};;
-{ .mfi;		xma.hu	f104=f35,f126,f103	}
-{ .mfi;		xma.lu	f103=f35,f126,f103	};;
-{ .mfi;		xma.hu	f114=f35,f127,f113	}
-{ .mfi;	mov		carry1=0
-		xma.lu	f113=f35,f127,f113
-	add		r25=r25,r24		};;//
-//-------------------------------------------------//
-{ .mfi;	getf.sig	r27=f43
-		xma.hu	f45=f36,f120,f44
-	cmp.ltu		p6,p0=r25,r24		}
-{ .mfi;		xma.lu	f44=f36,f120,f44	
-	add		r26=r26,r25		};;
-{ .mfi;	getf.sig	r16=f80
-		xma.hu	f55=f36,f121,f54
-(p6)	add		carry1=1,carry1		}
-{ .mfi;		xma.lu	f54=f36,f121,f54	};;
-{ .mfi;	getf.sig	r17=f71
-		xma.hu	f65=f36,f122,f64
-	cmp.ltu		p6,p0=r26,r25		}
-{ .mfi;		xma.lu	f64=f36,f122,f64
-	add		r27=r27,r26		};;
-{ .mfi;	getf.sig	r18=f62
-		xma.hu	f75=f36,f123,f74
-(p6)	add		carry1=1,carry1		}
-{ .mfi;	cmp.ltu		p6,p0=r27,r26
-		xma.lu	f74=f36,f123,f74
-	add		r27=r27,carry2		};;
-{ .mfi;	getf.sig	r19=f53
-		xma.hu	f85=f36,f124,f84
-(p6)	add		carry1=1,carry1		}
-{ .mfi;		xma.lu	f84=f36,f124,f84
-	cmp.ltu		p6,p0=r27,carry2	};;
-{ .mfi;	st8		[r33]=r27,16
-		xma.hu	f95=f36,f125,f94
-(p6)	add		carry1=1,carry1		}
-{ .mfi;		xma.lu	f94=f36,f125,f94	};;
-{ .mfi;		xma.hu	f105=f36,f126,f104	}
-{ .mfi;	mov		carry2=0
-		xma.lu	f104=f36,f126,f104
-	add		r17=r17,r16		};;
-{ .mfi;		xma.hu	f115=f36,f127,f114
-	cmp.ltu		p7,p0=r17,r16		}
-{ .mfi;		xma.lu	f114=f36,f127,f114
-	add		r18=r18,r17		};;//
-//-------------------------------------------------//
-{ .mfi;	getf.sig	r20=f44
-		xma.hu	f46=f37,f120,f45
-(p7)	add		carry2=1,carry2		}
-{ .mfi;	cmp.ltu		p7,p0=r18,r17
-		xma.lu	f45=f37,f120,f45
-	add		r19=r19,r18		};;
-{ .mfi;	getf.sig	r24=f90
-		xma.hu	f56=f37,f121,f55	}
-{ .mfi;		xma.lu	f55=f37,f121,f55	};;
-{ .mfi;	getf.sig	r25=f81
-		xma.hu	f66=f37,f122,f65
-(p7)	add		carry2=1,carry2		}
-{ .mfi;	cmp.ltu		p7,p0=r19,r18
-		xma.lu	f65=f37,f122,f65
-	add		r20=r20,r19		};;
-{ .mfi;	getf.sig	r26=f72
-		xma.hu	f76=f37,f123,f75
-(p7)	add		carry2=1,carry2		}
-{ .mfi;	cmp.ltu		p7,p0=r20,r19
-		xma.lu	f75=f37,f123,f75
-	add		r20=r20,carry1		};;
-{ .mfi;	getf.sig	r27=f63
-		xma.hu	f86=f37,f124,f85
-(p7)	add		carry2=1,carry2		}
-{ .mfi;		xma.lu	f85=f37,f124,f85
-	cmp.ltu		p7,p0=r20,carry1	};;
-{ .mfi;	getf.sig	r28=f54
-		xma.hu	f96=f37,f125,f95
-(p7)	add		carry2=1,carry2		}
-{ .mfi;	st8		[r32]=r20,16
-		xma.lu	f95=f37,f125,f95	};;
-{ .mfi;		xma.hu	f106=f37,f126,f105	}
-{ .mfi;	mov		carry1=0
-		xma.lu	f105=f37,f126,f105
-	add		r25=r25,r24		};;
-{ .mfi;		xma.hu	f116=f37,f127,f115
-	cmp.ltu		p6,p0=r25,r24		}
-{ .mfi;		xma.lu	f115=f37,f127,f115
-	add		r26=r26,r25		};;//
-//-------------------------------------------------//
-{ .mfi;	getf.sig	r29=f45
-		xma.hu	f47=f38,f120,f46
-(p6)	add		carry1=1,carry1		}
-{ .mfi;	cmp.ltu		p6,p0=r26,r25
-		xma.lu	f46=f38,f120,f46
-	add		r27=r27,r26		};;
-{ .mfi;	getf.sig	r16=f100
-		xma.hu	f57=f38,f121,f56
-(p6)	add		carry1=1,carry1		}
-{ .mfi;	cmp.ltu		p6,p0=r27,r26
-		xma.lu	f56=f38,f121,f56
-	add		r28=r28,r27		};;
-{ .mfi;	getf.sig	r17=f91
-		xma.hu	f67=f38,f122,f66
-(p6)	add		carry1=1,carry1		}
-{ .mfi;	cmp.ltu		p6,p0=r28,r27
-		xma.lu	f66=f38,f122,f66
-	add		r29=r29,r28		};;
-{ .mfi;	getf.sig	r18=f82
-		xma.hu	f77=f38,f123,f76
-(p6)	add		carry1=1,carry1		}
-{ .mfi;	cmp.ltu		p6,p0=r29,r28
-		xma.lu	f76=f38,f123,f76
-	add		r29=r29,carry2		};;
-{ .mfi;	getf.sig	r19=f73
-		xma.hu	f87=f38,f124,f86
-(p6)	add		carry1=1,carry1		}
-{ .mfi;		xma.lu	f86=f38,f124,f86
-	cmp.ltu		p6,p0=r29,carry2	};;
-{ .mfi;	getf.sig	r20=f64
-		xma.hu	f97=f38,f125,f96
-(p6)	add		carry1=1,carry1		}
-{ .mfi;	st8		[r33]=r29,16
-		xma.lu	f96=f38,f125,f96	};;
-{ .mfi;	getf.sig	r21=f55
-		xma.hu	f107=f38,f126,f106	}
-{ .mfi;	mov		carry2=0
-		xma.lu	f106=f38,f126,f106
-	add		r17=r17,r16		};;
-{ .mfi;		xma.hu	f117=f38,f127,f116
-	cmp.ltu		p7,p0=r17,r16		}
-{ .mfi;		xma.lu	f116=f38,f127,f116
-	add		r18=r18,r17		};;//
-//-------------------------------------------------//
-{ .mfi;	getf.sig	r22=f46
-		xma.hu	f48=f39,f120,f47
-(p7)	add		carry2=1,carry2		}
-{ .mfi;	cmp.ltu		p7,p0=r18,r17
-		xma.lu	f47=f39,f120,f47
-	add		r19=r19,r18		};;
-{ .mfi;	getf.sig	r24=f110
-		xma.hu	f58=f39,f121,f57
-(p7)	add		carry2=1,carry2		}
-{ .mfi;	cmp.ltu		p7,p0=r19,r18
-		xma.lu	f57=f39,f121,f57
-	add		r20=r20,r19		};;
-{ .mfi;	getf.sig	r25=f101
-		xma.hu	f68=f39,f122,f67
-(p7)	add		carry2=1,carry2		}
-{ .mfi;	cmp.ltu		p7,p0=r20,r19
-		xma.lu	f67=f39,f122,f67
-	add		r21=r21,r20		};;
-{ .mfi;	getf.sig	r26=f92
-		xma.hu	f78=f39,f123,f77
-(p7)	add		carry2=1,carry2		}
-{ .mfi;	cmp.ltu		p7,p0=r21,r20
-		xma.lu	f77=f39,f123,f77
-	add		r22=r22,r21		};;
-{ .mfi;	getf.sig	r27=f83
-		xma.hu	f88=f39,f124,f87
-(p7)	add		carry2=1,carry2		}
-{ .mfi;	cmp.ltu		p7,p0=r22,r21
-		xma.lu	f87=f39,f124,f87
-	add		r22=r22,carry1		};;
-{ .mfi;	getf.sig	r28=f74
-		xma.hu	f98=f39,f125,f97
-(p7)	add		carry2=1,carry2		}
-{ .mfi;		xma.lu	f97=f39,f125,f97
-	cmp.ltu		p7,p0=r22,carry1	};;
-{ .mfi;	getf.sig	r29=f65
-		xma.hu	f108=f39,f126,f107
-(p7)	add		carry2=1,carry2		}
-{ .mfi;	st8		[r32]=r22,16
-		xma.lu	f107=f39,f126,f107	};;
-{ .mfi;	getf.sig	r30=f56
-		xma.hu	f118=f39,f127,f117	}
-{ .mfi;		xma.lu	f117=f39,f127,f117	};;//
-//-------------------------------------------------//
-// Leaving muliplier's heaven... Quite a ride, huh?
-
-{ .mii;	getf.sig	r31=f47
-	add		r25=r25,r24
-	mov		carry1=0		};;
-{ .mii;		getf.sig	r16=f111
-	cmp.ltu		p6,p0=r25,r24
-	add		r26=r26,r25		};;
-{ .mfb;		getf.sig	r17=f102	}
-{ .mii;
-(p6)	add		carry1=1,carry1
-	cmp.ltu		p6,p0=r26,r25
-	add		r27=r27,r26		};;
-{ .mfb;	nop.m	0x0				}
-{ .mii;
-(p6)	add		carry1=1,carry1
-	cmp.ltu		p6,p0=r27,r26
-	add		r28=r28,r27		};;
-{ .mii;		getf.sig	r18=f93
-		add		r17=r17,r16
-		mov		carry3=0	}
-{ .mii;
-(p6)	add		carry1=1,carry1
-	cmp.ltu		p6,p0=r28,r27
-	add		r29=r29,r28		};;
-{ .mii;		getf.sig	r19=f84
-		cmp.ltu		p7,p0=r17,r16	}
-{ .mii;
-(p6)	add		carry1=1,carry1
-	cmp.ltu		p6,p0=r29,r28
-	add		r30=r30,r29		};;
-{ .mii;		getf.sig	r20=f75
-		add		r18=r18,r17	}
-{ .mii;
-(p6)	add		carry1=1,carry1
-	cmp.ltu		p6,p0=r30,r29
-	add		r31=r31,r30		};;
-{ .mfb;		getf.sig	r21=f66		}
-{ .mii;	(p7)	add		carry3=1,carry3
-		cmp.ltu		p7,p0=r18,r17
-		add		r19=r19,r18	}
-{ .mfb;	nop.m	0x0				}
-{ .mii;
-(p6)	add		carry1=1,carry1
-	cmp.ltu		p6,p0=r31,r30
-	add		r31=r31,carry2		};;
-{ .mfb;		getf.sig	r22=f57		}
-{ .mii;	(p7)	add		carry3=1,carry3
-		cmp.ltu		p7,p0=r19,r18
-		add		r20=r20,r19	}
-{ .mfb;	nop.m	0x0				}
-{ .mii;
-(p6)	add		carry1=1,carry1
-	cmp.ltu		p6,p0=r31,carry2	};;
-{ .mfb;		getf.sig	r23=f48		}
-{ .mii;	(p7)	add		carry3=1,carry3
-		cmp.ltu		p7,p0=r20,r19
-		add		r21=r21,r20	}
-{ .mii;
-(p6)	add		carry1=1,carry1		}
-{ .mfb;	st8		[r33]=r31,16		};;
-
-{ .mfb;	getf.sig	r24=f112		}
-{ .mii;	(p7)	add		carry3=1,carry3
-		cmp.ltu		p7,p0=r21,r20
-		add		r22=r22,r21	};;
-{ .mfb;	getf.sig	r25=f103		}
-{ .mii;	(p7)	add		carry3=1,carry3
-		cmp.ltu		p7,p0=r22,r21
-		add		r23=r23,r22	};;
-{ .mfb;	getf.sig	r26=f94			}
-{ .mii;	(p7)	add		carry3=1,carry3
-		cmp.ltu		p7,p0=r23,r22
-		add		r23=r23,carry1	};;
-{ .mfb;	getf.sig	r27=f85			}
-{ .mii;	(p7)	add		carry3=1,carry3
-		cmp.ltu		p7,p8=r23,carry1};;
-{ .mii;	getf.sig	r28=f76
-	add		r25=r25,r24
-	mov		carry1=0		}
-{ .mii;		st8		[r32]=r23,16
-	(p7)	add		carry2=1,carry3
-	(p8)	add		carry2=0,carry3	};;
-
-{ .mfb;	nop.m	0x0				}
-{ .mii;	getf.sig	r29=f67
-	cmp.ltu		p6,p0=r25,r24
-	add		r26=r26,r25		};;
-{ .mfb;	getf.sig	r30=f58			}
-{ .mii;
-(p6)	add		carry1=1,carry1
-	cmp.ltu		p6,p0=r26,r25
-	add		r27=r27,r26		};;
-{ .mfb;		getf.sig	r16=f113	}
-{ .mii;
-(p6)	add		carry1=1,carry1
-	cmp.ltu		p6,p0=r27,r26
-	add		r28=r28,r27		};;
-{ .mfb;		getf.sig	r17=f104	}
-{ .mii;
-(p6)	add		carry1=1,carry1
-	cmp.ltu		p6,p0=r28,r27
-	add		r29=r29,r28		};;
-{ .mfb;		getf.sig	r18=f95		}
-{ .mii;
-(p6)	add		carry1=1,carry1
-	cmp.ltu		p6,p0=r29,r28
-	add		r30=r30,r29		};;
-{ .mii;		getf.sig	r19=f86
-		add		r17=r17,r16
-		mov		carry3=0	}
-{ .mii;
-(p6)	add		carry1=1,carry1
-	cmp.ltu		p6,p0=r30,r29
-	add		r30=r30,carry2		};;
-{ .mii;		getf.sig	r20=f77
-		cmp.ltu		p7,p0=r17,r16
-		add		r18=r18,r17	}
-{ .mii;
-(p6)	add		carry1=1,carry1
-	cmp.ltu		p6,p0=r30,carry2	};;
-{ .mfb;		getf.sig	r21=f68		}
-{ .mii;	st8		[r33]=r30,16
-(p6)	add		carry1=1,carry1		};;
-
-{ .mfb;	getf.sig	r24=f114		}
-{ .mii;	(p7)	add		carry3=1,carry3
-		cmp.ltu		p7,p0=r18,r17
-		add		r19=r19,r18	};;
-{ .mfb;	getf.sig	r25=f105		}
-{ .mii;	(p7)	add		carry3=1,carry3
-		cmp.ltu		p7,p0=r19,r18
-		add		r20=r20,r19	};;
-{ .mfb;	getf.sig	r26=f96			}
-{ .mii;	(p7)	add		carry3=1,carry3
-		cmp.ltu		p7,p0=r20,r19
-		add		r21=r21,r20	};;
-{ .mfb;	getf.sig	r27=f87			}
-{ .mii;	(p7)	add		carry3=1,carry3
-		cmp.ltu		p7,p0=r21,r20
-		add		r21=r21,carry1	};;
-{ .mib;	getf.sig	r28=f78			
-	add		r25=r25,r24		}
-{ .mib;	(p7)	add		carry3=1,carry3
-		cmp.ltu		p7,p8=r21,carry1};;
-{ .mii;		st8		[r32]=r21,16
-	(p7)	add		carry2=1,carry3
-	(p8)	add		carry2=0,carry3	}
-
-{ .mii;	mov		carry1=0
-	cmp.ltu		p6,p0=r25,r24
-	add		r26=r26,r25		};;
-{ .mfb;		getf.sig	r16=f115	}
-{ .mii;
-(p6)	add		carry1=1,carry1
-	cmp.ltu		p6,p0=r26,r25
-	add		r27=r27,r26		};;
-{ .mfb;		getf.sig	r17=f106	}
-{ .mii;
-(p6)	add		carry1=1,carry1
-	cmp.ltu		p6,p0=r27,r26
-	add		r28=r28,r27		};;
-{ .mfb;		getf.sig	r18=f97		}
-{ .mii;
-(p6)	add		carry1=1,carry1
-	cmp.ltu		p6,p0=r28,r27
-	add		r28=r28,carry2		};;
-{ .mib;		getf.sig	r19=f88
-		add		r17=r17,r16	}
-{ .mib;
-(p6)	add		carry1=1,carry1
-	cmp.ltu		p6,p0=r28,carry2	};;
-{ .mii;	st8		[r33]=r28,16
-(p6)	add		carry1=1,carry1		}
-
-{ .mii;		mov		carry2=0
-		cmp.ltu		p7,p0=r17,r16
-		add		r18=r18,r17	};;
-{ .mfb;	getf.sig	r24=f116		}
-{ .mii;	(p7)	add		carry2=1,carry2
-		cmp.ltu		p7,p0=r18,r17
-		add		r19=r19,r18	};;
-{ .mfb;	getf.sig	r25=f107		}
-{ .mii;	(p7)	add		carry2=1,carry2
-		cmp.ltu		p7,p0=r19,r18
-		add		r19=r19,carry1	};;
-{ .mfb;	getf.sig	r26=f98			}
-{ .mii;	(p7)	add		carry2=1,carry2
-		cmp.ltu		p7,p0=r19,carry1};;
-{ .mii;		st8		[r32]=r19,16
-	(p7)	add		carry2=1,carry2	}
-
-{ .mfb;	add		r25=r25,r24		};;
-
-{ .mfb;		getf.sig	r16=f117	}
-{ .mii;	mov		carry1=0
-	cmp.ltu		p6,p0=r25,r24
-	add		r26=r26,r25		};;
-{ .mfb;		getf.sig	r17=f108	}
-{ .mii;
-(p6)	add		carry1=1,carry1
-	cmp.ltu		p6,p0=r26,r25
-	add		r26=r26,carry2		};;
-{ .mfb;	nop.m	0x0				}
-{ .mii;
-(p6)	add		carry1=1,carry1
-	cmp.ltu		p6,p0=r26,carry2	};;
-{ .mii;	st8		[r33]=r26,16
-(p6)	add		carry1=1,carry1		}
-
-{ .mfb;		add		r17=r17,r16	};;
-{ .mfb;	getf.sig	r24=f118		}
-{ .mii;		mov		carry2=0
-		cmp.ltu		p7,p0=r17,r16
-		add		r17=r17,carry1	};;
-{ .mii;	(p7)	add		carry2=1,carry2
-		cmp.ltu		p7,p0=r17,carry1};;
-{ .mii;		st8		[r32]=r17
-	(p7)	add		carry2=1,carry2	};;
-{ .mfb;	add		r24=r24,carry2		};;
-{ .mib;	st8		[r33]=r24		}
-
-{ .mib;	rum		1<<5		// clear um.mfh
-	br.ret.sptk.many	b0	};;
-.endp	bn_mul_comba8#
-#undef	carry3
-#undef	carry2
-#undef	carry1
-#endif
-
-#if 1
-// It's possible to make it faster (see comment to bn_sqr_comba8), but
-// I reckon it doesn't worth the effort. Basically because the routine
-// (actually both of them) practically never called... So I just play
-// same trick as with bn_sqr_comba8.
-//
-// void bn_sqr_comba4(BN_ULONG *r, BN_ULONG *a)
-//
-.global	bn_sqr_comba4#
-.proc	bn_sqr_comba4#
-.align	64
-bn_sqr_comba4:
-	.prologue
-	.fframe	0
-	.save	ar.pfs,r2
-#if defined(_HPUX_SOURCE) && !defined(_LP64)
-{ .mii;	alloc   r2=ar.pfs,2,1,0,0
-	addp4	r32=0,r32
-	addp4	r33=0,r33		};;
-{ .mii;
-#else
-{ .mii;	alloc	r2=ar.pfs,2,1,0,0
-#endif
-	mov	r34=r33
-	add	r14=8,r33		};;
-	.body
-{ .mii;	add	r17=8,r34
-	add	r15=16,r33
-	add	r18=16,r34		}
-{ .mfb;	add	r16=24,r33
-	br	.L_cheat_entry_point4	};;
-.endp	bn_sqr_comba4#
-#endif
-
-#if 1
-// Runs in ~115 cycles and ~4.5 times faster than C. Well, whatever...
-//
-// void bn_mul_comba4(BN_ULONG *r, BN_ULONG *a, BN_ULONG *b)
-//
-#define	carry1	r14
-#define	carry2	r15
-.global	bn_mul_comba4#
-.proc	bn_mul_comba4#
-.align	64
-bn_mul_comba4:
-	.prologue
-	.fframe	0
-	.save	ar.pfs,r2
-#if defined(_HPUX_SOURCE) && !defined(_LP64)
-{ .mii;	alloc   r2=ar.pfs,3,0,0,0
-	addp4	r33=0,r33
-	addp4	r34=0,r34		};;
-{ .mii;	addp4	r32=0,r32
-#else
-{ .mii;	alloc	r2=ar.pfs,3,0,0,0
-#endif
-	add	r14=8,r33
-	add	r17=8,r34		}
-	.body
-{ .mii;	add	r15=16,r33
-	add	r18=16,r34
-	add	r16=24,r33		};;
-.L_cheat_entry_point4:
-{ .mmi;	add	r19=24,r34
-
-	ldf8	f32=[r33]		}
-
-{ .mmi;	ldf8	f120=[r34]
-	ldf8	f121=[r17]		};;
-{ .mmi;	ldf8	f122=[r18]
-	ldf8	f123=[r19]		}
-
-{ .mmi;	ldf8	f33=[r14]
-	ldf8	f34=[r15]		}
-{ .mfi;	ldf8	f35=[r16]
-
-		xma.hu	f41=f32,f120,f0		}
-{ .mfi;		xma.lu	f40=f32,f120,f0		};;
-{ .mfi;		xma.hu	f51=f32,f121,f0		}
-{ .mfi;		xma.lu	f50=f32,f121,f0		};;
-{ .mfi;		xma.hu	f61=f32,f122,f0		}
-{ .mfi;		xma.lu	f60=f32,f122,f0		};;
-{ .mfi;		xma.hu	f71=f32,f123,f0		}
-{ .mfi;		xma.lu	f70=f32,f123,f0		};;//
-// Major stall takes place here, and 3 more places below. Result from
-// first xma is not available for another 3 ticks.
-{ .mfi;	getf.sig	r16=f40
-		xma.hu	f42=f33,f120,f41
-	add		r33=8,r32		}
-{ .mfi;		xma.lu	f41=f33,f120,f41	};;
-{ .mfi;	getf.sig	r24=f50
-		xma.hu	f52=f33,f121,f51	}
-{ .mfi;		xma.lu	f51=f33,f121,f51	};;
-{ .mfi;	st8		[r32]=r16,16
-		xma.hu	f62=f33,f122,f61	}
-{ .mfi;		xma.lu	f61=f33,f122,f61	};;
-{ .mfi;		xma.hu	f72=f33,f123,f71	}
-{ .mfi;		xma.lu	f71=f33,f123,f71	};;//
-//-------------------------------------------------//
-{ .mfi;	getf.sig	r25=f41
-		xma.hu	f43=f34,f120,f42	}
-{ .mfi;		xma.lu	f42=f34,f120,f42	};;
-{ .mfi;	getf.sig	r16=f60
-		xma.hu	f53=f34,f121,f52	}
-{ .mfi;		xma.lu	f52=f34,f121,f52	};;
-{ .mfi;	getf.sig	r17=f51
-		xma.hu	f63=f34,f122,f62
-	add		r25=r25,r24		}
-{ .mfi;	mov		carry1=0
-		xma.lu	f62=f34,f122,f62	};;
-{ .mfi;	st8		[r33]=r25,16
-		xma.hu	f73=f34,f123,f72
-	cmp.ltu		p6,p0=r25,r24		}
-{ .mfi;		xma.lu	f72=f34,f123,f72	};;//
-//-------------------------------------------------//
-{ .mfi;	getf.sig	r18=f42
-		xma.hu	f44=f35,f120,f43
-(p6)	add		carry1=1,carry1		}
-{ .mfi;	add		r17=r17,r16
-		xma.lu	f43=f35,f120,f43
-	mov		carry2=0		};;
-{ .mfi;	getf.sig	r24=f70
-		xma.hu	f54=f35,f121,f53
-	cmp.ltu		p7,p0=r17,r16		}
-{ .mfi;		xma.lu	f53=f35,f121,f53	};;
-{ .mfi;	getf.sig	r25=f61
-		xma.hu	f64=f35,f122,f63
-	add		r18=r18,r17		}
-{ .mfi;		xma.lu	f63=f35,f122,f63
-(p7)	add		carry2=1,carry2		};;
-{ .mfi;	getf.sig	r26=f52
-		xma.hu	f74=f35,f123,f73
-	cmp.ltu		p7,p0=r18,r17		}
-{ .mfi;		xma.lu	f73=f35,f123,f73
-	add		r18=r18,carry1		};;
-//-------------------------------------------------//
-{ .mii;	st8		[r32]=r18,16
-(p7)	add		carry2=1,carry2
-	cmp.ltu		p7,p0=r18,carry1	};;
-
-{ .mfi;	getf.sig	r27=f43	// last major stall
-(p7)	add		carry2=1,carry2		};;
-{ .mii;		getf.sig	r16=f71
-	add		r25=r25,r24
-	mov		carry1=0		};;
-{ .mii;		getf.sig	r17=f62	
-	cmp.ltu		p6,p0=r25,r24
-	add		r26=r26,r25		};;
-{ .mii;
-(p6)	add		carry1=1,carry1
-	cmp.ltu		p6,p0=r26,r25
-	add		r27=r27,r26		};;
-{ .mii;
-(p6)	add		carry1=1,carry1
-	cmp.ltu		p6,p0=r27,r26
-	add		r27=r27,carry2		};;
-{ .mii;		getf.sig	r18=f53
-(p6)	add		carry1=1,carry1
-	cmp.ltu		p6,p0=r27,carry2	};;
-{ .mfi;	st8		[r33]=r27,16
-(p6)	add		carry1=1,carry1		}
-
-{ .mii;		getf.sig	r19=f44
-		add		r17=r17,r16
-		mov		carry2=0	};;
-{ .mii;	getf.sig	r24=f72
-		cmp.ltu		p7,p0=r17,r16
-		add		r18=r18,r17	};;
-{ .mii;	(p7)	add		carry2=1,carry2
-		cmp.ltu		p7,p0=r18,r17
-		add		r19=r19,r18	};;
-{ .mii;	(p7)	add		carry2=1,carry2
-		cmp.ltu		p7,p0=r19,r18
-		add		r19=r19,carry1	};;
-{ .mii;	getf.sig	r25=f63
-	(p7)	add		carry2=1,carry2
-		cmp.ltu		p7,p0=r19,carry1};;
-{ .mii;		st8		[r32]=r19,16
-	(p7)	add		carry2=1,carry2	}
-
-{ .mii;	getf.sig	r26=f54
-	add		r25=r25,r24
-	mov		carry1=0		};;
-{ .mii;		getf.sig	r16=f73
-	cmp.ltu		p6,p0=r25,r24
-	add		r26=r26,r25		};;
-{ .mii;
-(p6)	add		carry1=1,carry1
-	cmp.ltu		p6,p0=r26,r25
-	add		r26=r26,carry2		};;
-{ .mii;		getf.sig	r17=f64
-(p6)	add		carry1=1,carry1
-	cmp.ltu		p6,p0=r26,carry2	};;
-{ .mii;	st8		[r33]=r26,16
-(p6)	add		carry1=1,carry1		}
-
-{ .mii;	getf.sig	r24=f74
-		add		r17=r17,r16	
-		mov		carry2=0	};;
-{ .mii;		cmp.ltu		p7,p0=r17,r16
-		add		r17=r17,carry1	};;
-
-{ .mii;	(p7)	add		carry2=1,carry2
-		cmp.ltu		p7,p0=r17,carry1};;
-{ .mii;		st8		[r32]=r17,16
-	(p7)	add		carry2=1,carry2	};;
-
-{ .mii;	add		r24=r24,carry2		};;
-{ .mii;	st8		[r33]=r24		}
-
-{ .mib;	rum		1<<5		// clear um.mfh
-	br.ret.sptk.many	b0	};;
-.endp	bn_mul_comba4#
-#undef	carry2
-#undef	carry1
-#endif
-
-#if 1
-//
-// BN_ULONG bn_div_words(BN_ULONG h, BN_ULONG l, BN_ULONG d)
-//
-// In the nutshell it's a port of my MIPS III/IV implementation.
-//
-#define	AT	r14
-#define	H	r16
-#define	HH	r20
-#define	L	r17
-#define	D	r18
-#define	DH	r22
-#define	I	r21
-
-#if 0
-// Some preprocessors (most notably HP-UX) appear to be allergic to
-// macros enclosed to parenthesis [as these three were].
-#define	cont	p16
-#define	break	p0	// p20
-#define	equ	p24
-#else
-cont=p16
-break=p0
-equ=p24
-#endif
-
-.global	abort#
-.global	bn_div_words#
-.proc	bn_div_words#
-.align	64
-bn_div_words:
-	.prologue
-	.fframe	0
-	.save	ar.pfs,r2
-	.save	b0,r3
-{ .mii;	alloc		r2=ar.pfs,3,5,0,8
-	mov		r3=b0
-	mov		r10=pr		};;
-{ .mmb;	cmp.eq		p6,p0=r34,r0
-	mov		r8=-1
-(p6)	br.ret.spnt.many	b0	};;
-
-	.body
-{ .mii;	mov		H=r32		// save h
-	mov		ar.ec=0		// don't rotate at exit
-	mov		pr.rot=0	}
-{ .mii;	mov		L=r33		// save l
-	mov		r36=r0		};;
-
-.L_divw_shift:	// -vv- note signed comparison
-{ .mfi;	(p0)	cmp.lt		p16,p0=r0,r34	// d
-	(p0)	shladd		r33=r34,1,r0	}
-{ .mfb;	(p0)	add		r35=1,r36
-	(p0)	nop.f		0x0
-(p16)	br.wtop.dpnt		.L_divw_shift	};;
-
-{ .mii;	mov		D=r34
-	shr.u		DH=r34,32
-	sub		r35=64,r36		};;
-{ .mii;	setf.sig	f7=DH
-	shr.u		AT=H,r35
-	mov		I=r36			};;
-{ .mib;	cmp.ne		p6,p0=r0,AT
-	shl		H=H,r36
-(p6)	br.call.spnt.clr	b0=abort	};;	// overflow, die...
-
-{ .mfi;	fcvt.xuf.s1	f7=f7
-	shr.u		AT=L,r35		};;
-{ .mii;	shl		L=L,r36
-	or		H=H,AT			};;
-
-{ .mii;	nop.m		0x0
-	cmp.leu		p6,p0=D,H;;
-(p6)	sub		H=H,D			}
-
-{ .mlx;	setf.sig	f14=D
-	movl		AT=0xffffffff		};;
-///////////////////////////////////////////////////////////
-{ .mii;	setf.sig	f6=H
-	shr.u		HH=H,32;;
-	cmp.eq		p6,p7=HH,DH		};;
-{ .mfb;
-(p6)	setf.sig	f8=AT
-(p7)	fcvt.xuf.s1	f6=f6
-(p7)	br.call.sptk	b6=.L_udiv64_32_b6	};;
-
-{ .mfi;	getf.sig	r33=f8				// q
-	xmpy.lu		f9=f8,f14		}
-{ .mfi;	xmpy.hu		f10=f8,f14
-	shrp		H=H,L,32		};;
-
-{ .mmi;	getf.sig	r35=f9				// tl
-	getf.sig	r31=f10			};;	// th
-
-.L_divw_1st_iter:
-{ .mii;	(p0)	add		r32=-1,r33
-	(p0)	cmp.eq		equ,cont=HH,r31		};;
-{ .mii;	(p0)	cmp.ltu		p8,p0=r35,D
-	(p0)	sub		r34=r35,D
-	(equ)	cmp.leu		break,cont=r35,H	};;
-{ .mib;	(cont)	cmp.leu		cont,break=HH,r31
-	(p8)	add		r31=-1,r31
-(cont)	br.wtop.spnt		.L_divw_1st_iter	};;
-///////////////////////////////////////////////////////////
-{ .mii;	sub		H=H,r35
-	shl		r8=r33,32
-	shl		L=L,32			};;
-///////////////////////////////////////////////////////////
-{ .mii;	setf.sig	f6=H
-	shr.u		HH=H,32;;
-	cmp.eq		p6,p7=HH,DH		};;
-{ .mfb;
-(p6)	setf.sig	f8=AT
-(p7)	fcvt.xuf.s1	f6=f6
-(p7)	br.call.sptk	b6=.L_udiv64_32_b6	};;
-
-{ .mfi;	getf.sig	r33=f8				// q
-	xmpy.lu		f9=f8,f14		}
-{ .mfi;	xmpy.hu		f10=f8,f14
-	shrp		H=H,L,32		};;
-
-{ .mmi;	getf.sig	r35=f9				// tl
-	getf.sig	r31=f10			};;	// th
-
-.L_divw_2nd_iter:
-{ .mii;	(p0)	add		r32=-1,r33
-	(p0)	cmp.eq		equ,cont=HH,r31		};;
-{ .mii;	(p0)	cmp.ltu		p8,p0=r35,D
-	(p0)	sub		r34=r35,D
-	(equ)	cmp.leu		break,cont=r35,H	};;
-{ .mib;	(cont)	cmp.leu		cont,break=HH,r31
-	(p8)	add		r31=-1,r31
-(cont)	br.wtop.spnt		.L_divw_2nd_iter	};;
-///////////////////////////////////////////////////////////
-{ .mii;	sub	H=H,r35
-	or	r8=r8,r33
-	mov	ar.pfs=r2		};;
-{ .mii;	shr.u	r9=H,I			// remainder if anybody wants it
-	mov	pr=r10,0x1ffff		}
-{ .mfb;	br.ret.sptk.many	b0	};;
-
-// Unsigned 64 by 32 (well, by 64 for the moment) bit integer division
-// procedure.
-//
-// inputs:	f6 = (double)a, f7 = (double)b
-// output:	f8 = (int)(a/b)
-// clobbered:	f8,f9,f10,f11,pred
-pred=p15
-// One can argue that this snippet is copyrighted to Intel
-// Corporation, as it's essentially identical to one of those
-// found in "Divide, Square Root and Remainder" section at
-// http://www.intel.com/software/products/opensource/libraries/num.htm.
-// Yes, I admit that the referred code was used as template,
-// but after I realized that there hardly is any other instruction
-// sequence which would perform this operation. I mean I figure that
-// any independent attempt to implement high-performance division
-// will result in code virtually identical to the Intel code. It
-// should be noted though that below division kernel is 1 cycle
-// faster than Intel one (note commented splits:-), not to mention
-// original prologue (rather lack of one) and epilogue.
-.align	32
-.skip	16
-.L_udiv64_32_b6:
-	frcpa.s1	f8,pred=f6,f7;;		// [0]  y0 = 1 / b
-
-(pred)	fnma.s1		f9=f7,f8,f1		// [5]  e0 = 1 - b * y0
-(pred)	fmpy.s1		f10=f6,f8;;		// [5]  q0 = a * y0
-(pred)	fmpy.s1		f11=f9,f9		// [10] e1 = e0 * e0
-(pred)	fma.s1		f10=f9,f10,f10;;	// [10] q1 = q0 + e0 * q0
-(pred)	fma.s1		f8=f9,f8,f8	//;;	// [15] y1 = y0 + e0 * y0
-(pred)	fma.s1		f9=f11,f10,f10;;	// [15] q2 = q1 + e1 * q1
-(pred)	fma.s1		f8=f11,f8,f8	//;;	// [20] y2 = y1 + e1 * y1
-(pred)	fnma.s1		f10=f7,f9,f6;;		// [20] r2 = a - b * q2
-(pred)	fma.s1		f8=f10,f8,f9;;		// [25] q3 = q2 + r2 * y2
-
-	fcvt.fxu.trunc.s1	f8=f8		// [30] q = trunc(q3)
-	br.ret.sptk.many	b6;;
-.endp	bn_div_words#
-#endif
diff --git a/crypto/openssl/crypto/bn/asm/mips1.s b/crypto/openssl/crypto/bn/asm/mips1.s
deleted file mode 100644
index 44fa1254c763..000000000000
--- a/crypto/openssl/crypto/bn/asm/mips1.s
+++ /dev/null
@@ -1,539 +0,0 @@
-/* This assember is for R2000/R3000 machines, or higher ones that do
- * no want to do any 64 bit arithmatic.
- * Make sure that the SSLeay bignum library is compiled with 
- * THIRTY_TWO_BIT set.
- * This must either be compiled with the system CC, or, if you use GNU gas,
- * cc -E mips1.s|gas -o mips1.o
- */
-	.set	reorder
-	.set	noat
-
-#define R1	$1
-#define CC	$2
-#define	R2	$3
-#define R3	$8
-#define R4	$9
-#define L1	$10
-#define L2 	$11
-#define L3	$12
-#define L4 	$13
-#define H1 	$14
-#define H2	$15
-#define H3	$24
-#define H4	$25
-
-#define P1	$4
-#define P2	$5
-#define P3	$6
-#define P4	$7
-
-	.align	2
-	.ent	bn_mul_add_words
-	.globl	bn_mul_add_words
-.text
-bn_mul_add_words:
-	.frame	$sp,0,$31
-	.mask	0x00000000,0
-	.fmask	0x00000000,0
-
-	#blt	P3,4,$lab34
-	
-	subu	R1,P3,4
-	move	CC,$0
-	bltz	R1,$lab34
-$lab2:	
-	lw	R1,0(P1)
-	 lw	L1,0(P2)
-	lw	R2,4(P1)
-	 lw	L2,4(P2)
-	lw	R3,8(P1)
-	 lw	L3,8(P2)
-	lw	R4,12(P1)
-	 lw	L4,12(P2)
-	multu	L1,P4
-	 addu	R1,R1,CC
-	mflo	L1
-	 sltu	CC,R1,CC
-	addu	R1,R1,L1
-	 mfhi	H1
-	sltu	L1,R1,L1
-	 sw	R1,0(P1)
-	addu	CC,CC,L1
-	 multu	L2,P4
-	addu	CC,H1,CC
-	mflo	L2
-	 addu	R2,R2,CC
-	sltu	CC,R2,CC
-	 mfhi	H2
-	addu	R2,R2,L2
-	 addu	P2,P2,16
-	sltu	L2,R2,L2
-	 sw	R2,4(P1)
-	addu	CC,CC,L2
-	 multu	L3,P4
-	addu	CC,H2,CC
-	mflo	L3
-	 addu	R3,R3,CC
-	sltu	CC,R3,CC
-	 mfhi	H3
-	addu	R3,R3,L3
-	 addu	P1,P1,16
-	sltu	L3,R3,L3
-	 sw	R3,-8(P1)
-	addu	CC,CC,L3
-	 multu	L4,P4
-	addu	CC,H3,CC
-	mflo	L4
-	 addu	R4,R4,CC
-	sltu	CC,R4,CC
-	 mfhi	H4
-	addu	R4,R4,L4
-	 subu	P3,P3,4
-	sltu	L4,R4,L4
-	addu	CC,CC,L4
-	addu	CC,H4,CC
-
-	subu	R1,P3,4
-	sw	R4,-4(P1)	# delay slot
-	bgez	R1,$lab2
-
-	bleu	P3,0,$lab3
-	.align	2
-$lab33: 
-	lw	L1,0(P2)
-	 lw	R1,0(P1)
-	multu	L1,P4
-	 addu	R1,R1,CC
-	sltu	CC,R1,CC
-	 addu	P1,P1,4
-	mflo	L1
-	 mfhi	H1
-	addu	R1,R1,L1
-	 addu	P2,P2,4
-	sltu	L1,R1,L1
-	 subu	P3,P3,1
-	addu	CC,CC,L1
-	 sw	R1,-4(P1)
-	addu	CC,H1,CC
-	 bgtz	P3,$lab33
-	j	$31
-	.align	2
-$lab3:
-	j	$31
-	.align	2
-$lab34:
-	bgt	P3,0,$lab33
-	j	$31
-	.end	bn_mul_add_words
-
-	.align	2
-	# Program Unit: bn_mul_words
-	.ent	bn_mul_words
-	.globl	bn_mul_words
-.text
-bn_mul_words:
-	.frame	$sp,0,$31
-	.mask	0x00000000,0
-	.fmask	0x00000000,0
-	
-	subu	P3,P3,4
-	move	CC,$0
-	bltz	P3,$lab45
-$lab44:	
-	lw	L1,0(P2)
-	 lw	L2,4(P2)
-	lw	L3,8(P2)
-	 lw	L4,12(P2)
-	multu	L1,P4
-	 subu	P3,P3,4
-	mflo	L1
-	 mfhi	H1
-	addu	L1,L1,CC
-	 multu	L2,P4
-	sltu	CC,L1,CC
-	 sw	L1,0(P1)
-	addu	CC,H1,CC
-	 mflo	L2
-	mfhi	H2
-	 addu	L2,L2,CC
-	multu	L3,P4
-	 sltu	CC,L2,CC
-	sw	L2,4(P1)
-	 addu	CC,H2,CC
-	mflo	L3
-	 mfhi	H3
-	addu	L3,L3,CC
-	 multu	L4,P4
-	sltu	CC,L3,CC
-	 sw	L3,8(P1)
-	addu	CC,H3,CC
-	 mflo	L4
-	mfhi	H4
-	 addu	L4,L4,CC
-	addu	P1,P1,16
-	 sltu	CC,L4,CC
-	addu	P2,P2,16
-	 addu	CC,H4,CC
-	sw	L4,-4(P1)
-
-	bgez	P3,$lab44
-	b	$lab45
-$lab46:
-	lw	L1,0(P2)
-	 addu	P1,P1,4
-	multu	L1,P4
-	 addu	P2,P2,4
-	mflo	L1
-	 mfhi	H1
-	addu	L1,L1,CC
-	 subu	P3,P3,1
-	sltu	CC,L1,CC
-	 sw	L1,-4(P1)
-	addu	CC,H1,CC
-	 bgtz	P3,$lab46
-	j	$31
-$lab45:
-	addu	P3,P3,4
-	bgtz	P3,$lab46
-	j	$31
-	.align	2
-	.end	bn_mul_words
-
-	# Program Unit: bn_sqr_words
-	.ent	bn_sqr_words
-	.globl	bn_sqr_words
-.text
-bn_sqr_words:
-	.frame	$sp,0,$31
-	.mask	0x00000000,0
-	.fmask	0x00000000,0
-	
-	subu	P3,P3,4
-	bltz	P3,$lab55
-$lab54:
-	lw	L1,0(P2)
-	 lw	L2,4(P2)
-	lw	L3,8(P2)
-	 lw	L4,12(P2)
-
-	multu	L1,L1
-	 subu	P3,P3,4
-	mflo	L1
-	 mfhi	H1
-	sw	L1,0(P1)
-	 sw	H1,4(P1)
-
-	multu	L2,L2
-	 addu	P1,P1,32
-	mflo	L2
-	 mfhi	H2
-	sw	L2,-24(P1)
-	 sw	H2,-20(P1)
-
-	multu	L3,L3
-	 addu	P2,P2,16
-	mflo	L3
-	 mfhi	H3
-	sw	L3,-16(P1)
-	 sw	H3,-12(P1)
-
-	multu	L4,L4
-
-	mflo	L4
-	 mfhi	H4
-	sw	L4,-8(P1)
-	 sw	H4,-4(P1)
-
-	bgtz	P3,$lab54
-	b	$lab55
-$lab56:	
-	lw	L1,0(P2)
-	addu	P1,P1,8
-	multu	L1,L1
-	addu	P2,P2,4
-	subu	P3,P3,1
-	mflo	L1
-	mfhi	H1
-	sw	L1,-8(P1)
-	sw	H1,-4(P1)
-
-	bgtz	P3,$lab56
-	j	$31
-$lab55:
-	addu	P3,P3,4
-	bgtz	P3,$lab56
-	j	$31
-	.align	2
-	.end	bn_sqr_words
-
-	# Program Unit: bn_add_words
-	.ent	bn_add_words
-	.globl	bn_add_words
-.text
-bn_add_words: 	 # 0x590
-	.frame	$sp,0,$31
-	.mask	0x00000000,0
-	.fmask	0x00000000,0
-	
-	subu	P4,P4,4
-	move	CC,$0
-	bltz	P4,$lab65
-$lab64:	
-	lw	L1,0(P2)
-	lw	R1,0(P3)
-	lw	L2,4(P2)
-	lw	R2,4(P3)
-
-	addu	L1,L1,CC
-	 lw	L3,8(P2)
-	sltu	CC,L1,CC
-	 addu	L1,L1,R1
-	sltu	R1,L1,R1
-	 lw	R3,8(P3)
-	addu	CC,CC,R1
-	 lw	L4,12(P2)
-
-	addu	L2,L2,CC
-	 lw	R4,12(P3)
-	sltu	CC,L2,CC
-	 addu	L2,L2,R2
-	sltu	R2,L2,R2
-	 sw	L1,0(P1)
-	addu	CC,CC,R2
-	 addu	P1,P1,16
-	addu	L3,L3,CC
-	 sw	L2,-12(P1)
- 
-	sltu	CC,L3,CC
-	 addu	L3,L3,R3
-	sltu	R3,L3,R3
-	 addu	P2,P2,16
-	addu	CC,CC,R3
-
-	addu	L4,L4,CC
-	 addu	P3,P3,16
-	sltu	CC,L4,CC
-	 addu	L4,L4,R4
-	subu	P4,P4,4
-	 sltu	R4,L4,R4
-	sw	L3,-8(P1)
-	 addu	CC,CC,R4
-	sw	L4,-4(P1)
-
-	bgtz	P4,$lab64
-	b	$lab65
-$lab66:
-	lw	L1,0(P2)
-	 lw	R1,0(P3)
-	addu	L1,L1,CC
-	 addu	P1,P1,4
-	sltu	CC,L1,CC
-	 addu	P2,P2,4
-	addu	P3,P3,4
-	 addu	L1,L1,R1
-	subu	P4,P4,1
-	 sltu	R1,L1,R1
-	sw	L1,-4(P1)
-	 addu	CC,CC,R1
-
-	bgtz	P4,$lab66
-	j	$31
-$lab65:
-	addu	P4,P4,4
-	bgtz	P4,$lab66
-	j	$31
-	.end	bn_add_words
-
-	# Program Unit: bn_div64
-	.set	at
-	.set	reorder
-	.text	
-	.align	2
-	.globl	bn_div64
- # 321		{
-	.ent	bn_div64 2
-bn_div64:
-	subu	$sp, 64
-	sw	$31, 56($sp)
-	sw	$16, 48($sp)
-	.mask	0x80010000, -56
-	.frame	$sp, 64, $31
-	move	$9, $4
-	move	$12, $5
-	move	$16, $6
- # 322		BN_ULONG dh,dl,q,ret=0,th,tl,t;
-	move	$31, $0
- # 323		int i,count=2;
-	li	$13, 2
- # 324	
- # 325		if (d == 0) return(BN_MASK2);
-	bne	$16, 0, $80
-	li	$2, -1
-	b	$93
-$80:
- # 326	
- # 327		i=BN_num_bits_word(d);
-	move	$4, $16
-	sw	$31, 16($sp)
-	sw	$9, 24($sp)
-	sw	$12, 32($sp)
-	sw	$13, 40($sp)
-	.livereg	0x800ff0e,0xfff
-	jal	BN_num_bits_word
-	li	$4, 32
-	lw	$31, 16($sp)
-	lw	$9, 24($sp)
-	lw	$12, 32($sp)
-	lw	$13, 40($sp)
-	move	$3, $2
- # 328		if ((i != BN_BITS2) && (h > (BN_ULONG)1<<i))
-	beq	$2, $4, $81
-	li	$14, 1
-	sll	$15, $14, $2
-	bleu	$9, $15, $81
- # 329			{
- # 330	#if !defined(NO_STDIO) && !defined(WIN16)
- # 331			fprintf(stderr,"Division would overflow (%d)\n",i);
- # 332	#endif
- # 333			abort();
-	sw	$3, 8($sp)
-	sw	$9, 24($sp)
-	sw	$12, 32($sp)
-	sw	$13, 40($sp)
-	sw	$31, 26($sp)
-	.livereg	0xff0e,0xfff
-	jal	abort
-	lw	$3, 8($sp)
-	li	$4, 32
-	lw	$9, 24($sp)
-	lw	$12, 32($sp)
-	lw	$13, 40($sp)
-	lw	$31, 26($sp)
- # 334			}
-$81:
- # 335		i=BN_BITS2-i;
-	subu	$3, $4, $3
- # 336		if (h >= d) h-=d;
-	bltu	$9, $16, $82
-	subu	$9, $9, $16
-$82:
- # 337	
- # 338		if (i)
-	beq	$3, 0, $83
- # 339			{
- # 340			d<<=i;
-	sll	$16, $16, $3
- # 341			h=(h<<i)|(l>>(BN_BITS2-i));
-	sll	$24, $9, $3
-	subu	$25, $4, $3
-	srl	$14, $12, $25
-	or	$9, $24, $14
- # 342			l<<=i;
-	sll	$12, $12, $3
- # 343			}
-$83:
- # 344		dh=(d&BN_MASK2h)>>BN_BITS4;
- # 345		dl=(d&BN_MASK2l);
-	and	$8, $16, -65536
-	srl	$8, $8, 16
-	and	$10, $16, 65535
-	li	$6, -65536
-$84:
- # 346		for (;;)
- # 347			{
- # 348			if ((h>>BN_BITS4) == dh)
-	srl	$15, $9, 16
-	bne	$8, $15, $85
- # 349				q=BN_MASK2l;
-	li	$5, 65535
-	b	$86
-$85:
- # 350			else
- # 351				q=h/dh;
-	divu	$5, $9, $8
-$86:
- # 352	
- # 353			for (;;)
- # 354				{
- # 355				t=(h-q*dh);
-	mul	$4, $5, $8
-	subu	$2, $9, $4
-	move	$3, $2
- # 356				if ((t&BN_MASK2h) ||
- # 357					((dl*q) <= (
- # 358						(t<<BN_BITS4)+
- # 359						((l&BN_MASK2h)>>BN_BITS4))))
-	and	$25, $2, $6
-	bne	$25, $0, $87
-	mul	$24, $10, $5
-	sll	$14, $3, 16
-	and	$15, $12, $6
-	srl	$25, $15, 16
-	addu	$15, $14, $25
-	bgtu	$24, $15, $88
-$87:
- # 360					break;
-	mul	$3, $10, $5
-	b	$89
-$88:
- # 361				q--;
-	addu	$5, $5, -1
- # 362				}
-	b	$86
-$89:
- # 363			th=q*dh;
- # 364			tl=q*dl;
- # 365			t=(tl>>BN_BITS4);
- # 366			tl=(tl<<BN_BITS4)&BN_MASK2h;
-	sll	$14, $3, 16
-	and	$2, $14, $6
-	move	$11, $2
- # 367			th+=t;
-	srl	$25, $3, 16
-	addu	$7, $4, $25
- # 368	
- # 369			if (l < tl) th++;
-	bgeu	$12, $2, $90
-	addu	$7, $7, 1
-$90:
- # 370			l-=tl;
-	subu	$12, $12, $11
- # 371			if (h < th)
-	bgeu	$9, $7, $91
- # 372				{
- # 373				h+=d;
-	addu	$9, $9, $16
- # 374				q--;
-	addu	$5, $5, -1
- # 375				}
-$91:
- # 376			h-=th;
-	subu	$9, $9, $7
- # 377	
- # 378			if (--count == 0) break;
-	addu	$13, $13, -1
-	beq	$13, 0, $92
- # 379	
- # 380			ret=q<<BN_BITS4;
-	sll	$31, $5, 16
- # 381			h=((h<<BN_BITS4)|(l>>BN_BITS4))&BN_MASK2;
-	sll	$24, $9, 16
-	srl	$15, $12, 16
-	or	$9, $24, $15
- # 382			l=(l&BN_MASK2l)<<BN_BITS4;
-	and	$12, $12, 65535
-	sll	$12, $12, 16
- # 383			}
-	b	$84
-$92:
- # 384		ret|=q;
-	or	$31, $31, $5
- # 385		return(ret);
-	move	$2, $31
-$93:
-	lw	$16, 48($sp)
-	lw	$31, 56($sp)
-	addu	$sp, 64
-	j	$31
-	.end	bn_div64
-
diff --git a/crypto/openssl/crypto/bn/asm/mips3.s b/crypto/openssl/crypto/bn/asm/mips3.s
deleted file mode 100644
index dca4105c7db1..000000000000
--- a/crypto/openssl/crypto/bn/asm/mips3.s
+++ /dev/null
@@ -1,2201 +0,0 @@
-.rdata
-.asciiz	"mips3.s, Version 1.1"
-.asciiz	"MIPS III/IV ISA artwork by Andy Polyakov <appro@fy.chalmers.se>"
-
-/*
- * ====================================================================
- * Written by Andy Polyakov <appro@fy.chalmers.se> for the OpenSSL
- * project.
- *
- * Rights for redistribution and usage in source and binary forms are
- * granted according to the OpenSSL license. Warranty of any kind is
- * disclaimed.
- * ====================================================================
- */
-
-/*
- * This is my modest contributon to the OpenSSL project (see
- * http://www.openssl.org/ for more information about it) and is
- * a drop-in MIPS III/IV ISA replacement for crypto/bn/bn_asm.c
- * module. For updates see http://fy.chalmers.se/~appro/hpe/.
- *
- * The module is designed to work with either of the "new" MIPS ABI(5),
- * namely N32 or N64, offered by IRIX 6.x. It's not ment to work under
- * IRIX 5.x not only because it doesn't support new ABIs but also
- * because 5.x kernels put R4x00 CPU into 32-bit mode and all those
- * 64-bit instructions (daddu, dmultu, etc.) found below gonna only
- * cause illegal instruction exception:-(
- *
- * In addition the code depends on preprocessor flags set up by MIPSpro
- * compiler driver (either as or cc) and therefore (probably?) can't be
- * compiled by the GNU assembler. GNU C driver manages fine though...
- * I mean as long as -mmips-as is specified or is the default option,
- * because then it simply invokes /usr/bin/as which in turn takes
- * perfect care of the preprocessor definitions. Another neat feature
- * offered by the MIPSpro assembler is an optimization pass. This gave
- * me the opportunity to have the code looking more regular as all those
- * architecture dependent instruction rescheduling details were left to
- * the assembler. Cool, huh?
- *
- * Performance improvement is astonishing! 'apps/openssl speed rsa dsa'
- * goes way over 3 times faster!
- *
- *					<appro@fy.chalmers.se>
- */
-#include <asm.h>
-#include <regdef.h>
-
-#if _MIPS_ISA>=4
-#define	MOVNZ(cond,dst,src)	\
-	movn	dst,src,cond
-#else
-#define	MOVNZ(cond,dst,src)	\
-	.set	noreorder;	\
-	bnezl	cond,.+8;	\
-	move	dst,src;	\
-	.set	reorder
-#endif
-
-.text
-
-.set	noat
-.set	reorder
-
-#define	MINUS4	v1
-
-.align	5
-LEAF(bn_mul_add_words)
-	.set	noreorder
-	bgtzl	a2,.L_bn_mul_add_words_proceed
-	ld	t0,0(a1)
-	jr	ra
-	move	v0,zero
-	.set	reorder
-
-.L_bn_mul_add_words_proceed:
-	li	MINUS4,-4
-	and	ta0,a2,MINUS4
-	move	v0,zero
-	beqz	ta0,.L_bn_mul_add_words_tail
-
-.L_bn_mul_add_words_loop:
-	dmultu	t0,a3
-	ld	t1,0(a0)
-	ld	t2,8(a1)
-	ld	t3,8(a0)
-	ld	ta0,16(a1)
-	ld	ta1,16(a0)
-	daddu	t1,v0
-	sltu	v0,t1,v0	/* All manuals say it "compares 32-bit
-				 * values", but it seems to work fine
-				 * even on 64-bit registers. */
-	mflo	AT
-	mfhi	t0
-	daddu	t1,AT
-	daddu	v0,t0
-	sltu	AT,t1,AT
-	sd	t1,0(a0)
-	daddu	v0,AT
-
-	dmultu	t2,a3
-	ld	ta2,24(a1)
-	ld	ta3,24(a0)
-	daddu	t3,v0
-	sltu	v0,t3,v0
-	mflo	AT
-	mfhi	t2
-	daddu	t3,AT
-	daddu	v0,t2
-	sltu	AT,t3,AT
-	sd	t3,8(a0)
-	daddu	v0,AT
-
-	dmultu	ta0,a3
-	subu	a2,4
-	PTR_ADD	a0,32
-	PTR_ADD	a1,32
-	daddu	ta1,v0
-	sltu	v0,ta1,v0
-	mflo	AT
-	mfhi	ta0
-	daddu	ta1,AT
-	daddu	v0,ta0
-	sltu	AT,ta1,AT
-	sd	ta1,-16(a0)
-	daddu	v0,AT
-
-
-	dmultu	ta2,a3
-	and	ta0,a2,MINUS4
-	daddu	ta3,v0
-	sltu	v0,ta3,v0
-	mflo	AT
-	mfhi	ta2
-	daddu	ta3,AT
-	daddu	v0,ta2
-	sltu	AT,ta3,AT
-	sd	ta3,-8(a0)
-	daddu	v0,AT
-	.set	noreorder
-	bgtzl	ta0,.L_bn_mul_add_words_loop
-	ld	t0,0(a1)
-
-	bnezl	a2,.L_bn_mul_add_words_tail
-	ld	t0,0(a1)
-	.set	reorder
-
-.L_bn_mul_add_words_return:
-	jr	ra
-
-.L_bn_mul_add_words_tail:
-	dmultu	t0,a3
-	ld	t1,0(a0)
-	subu	a2,1
-	daddu	t1,v0
-	sltu	v0,t1,v0
-	mflo	AT
-	mfhi	t0
-	daddu	t1,AT
-	daddu	v0,t0
-	sltu	AT,t1,AT
-	sd	t1,0(a0)
-	daddu	v0,AT
-	beqz	a2,.L_bn_mul_add_words_return
-
-	ld	t0,8(a1)
-	dmultu	t0,a3
-	ld	t1,8(a0)
-	subu	a2,1
-	daddu	t1,v0
-	sltu	v0,t1,v0
-	mflo	AT
-	mfhi	t0
-	daddu	t1,AT
-	daddu	v0,t0
-	sltu	AT,t1,AT
-	sd	t1,8(a0)
-	daddu	v0,AT
-	beqz	a2,.L_bn_mul_add_words_return
-
-	ld	t0,16(a1)
-	dmultu	t0,a3
-	ld	t1,16(a0)
-	daddu	t1,v0
-	sltu	v0,t1,v0
-	mflo	AT
-	mfhi	t0
-	daddu	t1,AT
-	daddu	v0,t0
-	sltu	AT,t1,AT
-	sd	t1,16(a0)
-	daddu	v0,AT
-	jr	ra
-END(bn_mul_add_words)
-
-.align	5
-LEAF(bn_mul_words)
-	.set	noreorder
-	bgtzl	a2,.L_bn_mul_words_proceed
-	ld	t0,0(a1)
-	jr	ra
-	move	v0,zero
-	.set	reorder
-
-.L_bn_mul_words_proceed:
-	li	MINUS4,-4
-	and	ta0,a2,MINUS4
-	move	v0,zero
-	beqz	ta0,.L_bn_mul_words_tail
-
-.L_bn_mul_words_loop:
-	dmultu	t0,a3
-	ld	t2,8(a1)
-	ld	ta0,16(a1)
-	ld	ta2,24(a1)
-	mflo	AT
-	mfhi	t0
-	daddu	v0,AT
-	sltu	t1,v0,AT
-	sd	v0,0(a0)
-	daddu	v0,t1,t0
-
-	dmultu	t2,a3
-	subu	a2,4
-	PTR_ADD	a0,32
-	PTR_ADD	a1,32
-	mflo	AT
-	mfhi	t2
-	daddu	v0,AT
-	sltu	t3,v0,AT
-	sd	v0,-24(a0)
-	daddu	v0,t3,t2
-
-	dmultu	ta0,a3
-	mflo	AT
-	mfhi	ta0
-	daddu	v0,AT
-	sltu	ta1,v0,AT
-	sd	v0,-16(a0)
-	daddu	v0,ta1,ta0
-
-
-	dmultu	ta2,a3
-	and	ta0,a2,MINUS4
-	mflo	AT
-	mfhi	ta2
-	daddu	v0,AT
-	sltu	ta3,v0,AT
-	sd	v0,-8(a0)
-	daddu	v0,ta3,ta2
-	.set	noreorder
-	bgtzl	ta0,.L_bn_mul_words_loop
-	ld	t0,0(a1)
-
-	bnezl	a2,.L_bn_mul_words_tail
-	ld	t0,0(a1)
-	.set	reorder
-
-.L_bn_mul_words_return:
-	jr	ra
-
-.L_bn_mul_words_tail:
-	dmultu	t0,a3
-	subu	a2,1
-	mflo	AT
-	mfhi	t0
-	daddu	v0,AT
-	sltu	t1,v0,AT
-	sd	v0,0(a0)
-	daddu	v0,t1,t0
-	beqz	a2,.L_bn_mul_words_return
-
-	ld	t0,8(a1)
-	dmultu	t0,a3
-	subu	a2,1
-	mflo	AT
-	mfhi	t0
-	daddu	v0,AT
-	sltu	t1,v0,AT
-	sd	v0,8(a0)
-	daddu	v0,t1,t0
-	beqz	a2,.L_bn_mul_words_return
-
-	ld	t0,16(a1)
-	dmultu	t0,a3
-	mflo	AT
-	mfhi	t0
-	daddu	v0,AT
-	sltu	t1,v0,AT
-	sd	v0,16(a0)
-	daddu	v0,t1,t0
-	jr	ra
-END(bn_mul_words)
-
-.align	5
-LEAF(bn_sqr_words)
-	.set	noreorder
-	bgtzl	a2,.L_bn_sqr_words_proceed
-	ld	t0,0(a1)
-	jr	ra
-	move	v0,zero
-	.set	reorder
-
-.L_bn_sqr_words_proceed:
-	li	MINUS4,-4
-	and	ta0,a2,MINUS4
-	move	v0,zero
-	beqz	ta0,.L_bn_sqr_words_tail
-
-.L_bn_sqr_words_loop:
-	dmultu	t0,t0
-	ld	t2,8(a1)
-	ld	ta0,16(a1)
-	ld	ta2,24(a1)
-	mflo	t1
-	mfhi	t0
-	sd	t1,0(a0)
-	sd	t0,8(a0)
-
-	dmultu	t2,t2
-	subu	a2,4
-	PTR_ADD	a0,64
-	PTR_ADD	a1,32
-	mflo	t3
-	mfhi	t2
-	sd	t3,-48(a0)
-	sd	t2,-40(a0)
-
-	dmultu	ta0,ta0
-	mflo	ta1
-	mfhi	ta0
-	sd	ta1,-32(a0)
-	sd	ta0,-24(a0)
-
-
-	dmultu	ta2,ta2
-	and	ta0,a2,MINUS4
-	mflo	ta3
-	mfhi	ta2
-	sd	ta3,-16(a0)
-	sd	ta2,-8(a0)
-
-	.set	noreorder
-	bgtzl	ta0,.L_bn_sqr_words_loop
-	ld	t0,0(a1)
-
-	bnezl	a2,.L_bn_sqr_words_tail
-	ld	t0,0(a1)
-	.set	reorder
-
-.L_bn_sqr_words_return:
-	move	v0,zero
-	jr	ra
-
-.L_bn_sqr_words_tail:
-	dmultu	t0,t0
-	subu	a2,1
-	mflo	t1
-	mfhi	t0
-	sd	t1,0(a0)
-	sd	t0,8(a0)
-	beqz	a2,.L_bn_sqr_words_return
-
-	ld	t0,8(a1)
-	dmultu	t0,t0
-	subu	a2,1
-	mflo	t1
-	mfhi	t0
-	sd	t1,16(a0)
-	sd	t0,24(a0)
-	beqz	a2,.L_bn_sqr_words_return
-
-	ld	t0,16(a1)
-	dmultu	t0,t0
-	mflo	t1
-	mfhi	t0
-	sd	t1,32(a0)
-	sd	t0,40(a0)
-	jr	ra
-END(bn_sqr_words)
-
-.align	5
-LEAF(bn_add_words)
-	.set	noreorder
-	bgtzl	a3,.L_bn_add_words_proceed
-	ld	t0,0(a1)
-	jr	ra
-	move	v0,zero
-	.set	reorder
-
-.L_bn_add_words_proceed:
-	li	MINUS4,-4
-	and	AT,a3,MINUS4
-	move	v0,zero
-	beqz	AT,.L_bn_add_words_tail
-
-.L_bn_add_words_loop:
-	ld	ta0,0(a2)
-	subu	a3,4
-	ld	t1,8(a1)
-	and	AT,a3,MINUS4
-	ld	t2,16(a1)
-	PTR_ADD	a2,32
-	ld	t3,24(a1)
-	PTR_ADD	a0,32
-	ld	ta1,-24(a2)
-	PTR_ADD	a1,32
-	ld	ta2,-16(a2)
-	ld	ta3,-8(a2)
-	daddu	ta0,t0
-	sltu	t8,ta0,t0
-	daddu	t0,ta0,v0
-	sltu	v0,t0,ta0
-	sd	t0,-32(a0)
-	daddu	v0,t8
-
-	daddu	ta1,t1
-	sltu	t9,ta1,t1
-	daddu	t1,ta1,v0
-	sltu	v0,t1,ta1
-	sd	t1,-24(a0)
-	daddu	v0,t9
-
-	daddu	ta2,t2
-	sltu	t8,ta2,t2
-	daddu	t2,ta2,v0
-	sltu	v0,t2,ta2
-	sd	t2,-16(a0)
-	daddu	v0,t8
-	
-	daddu	ta3,t3
-	sltu	t9,ta3,t3
-	daddu	t3,ta3,v0
-	sltu	v0,t3,ta3
-	sd	t3,-8(a0)
-	daddu	v0,t9
-	
-	.set	noreorder
-	bgtzl	AT,.L_bn_add_words_loop
-	ld	t0,0(a1)
-
-	bnezl	a3,.L_bn_add_words_tail
-	ld	t0,0(a1)
-	.set	reorder
-
-.L_bn_add_words_return:
-	jr	ra
-
-.L_bn_add_words_tail:
-	ld	ta0,0(a2)
-	daddu	ta0,t0
-	subu	a3,1
-	sltu	t8,ta0,t0
-	daddu	t0,ta0,v0
-	sltu	v0,t0,ta0
-	sd	t0,0(a0)
-	daddu	v0,t8
-	beqz	a3,.L_bn_add_words_return
-
-	ld	t1,8(a1)
-	ld	ta1,8(a2)
-	daddu	ta1,t1
-	subu	a3,1
-	sltu	t9,ta1,t1
-	daddu	t1,ta1,v0
-	sltu	v0,t1,ta1
-	sd	t1,8(a0)
-	daddu	v0,t9
-	beqz	a3,.L_bn_add_words_return
-
-	ld	t2,16(a1)
-	ld	ta2,16(a2)
-	daddu	ta2,t2
-	sltu	t8,ta2,t2
-	daddu	t2,ta2,v0
-	sltu	v0,t2,ta2
-	sd	t2,16(a0)
-	daddu	v0,t8
-	jr	ra
-END(bn_add_words)
-
-.align	5
-LEAF(bn_sub_words)
-	.set	noreorder
-	bgtzl	a3,.L_bn_sub_words_proceed
-	ld	t0,0(a1)
-	jr	ra
-	move	v0,zero
-	.set	reorder
-
-.L_bn_sub_words_proceed:
-	li	MINUS4,-4
-	and	AT,a3,MINUS4
-	move	v0,zero
-	beqz	AT,.L_bn_sub_words_tail
-
-.L_bn_sub_words_loop:
-	ld	ta0,0(a2)
-	subu	a3,4
-	ld	t1,8(a1)
-	and	AT,a3,MINUS4
-	ld	t2,16(a1)
-	PTR_ADD	a2,32
-	ld	t3,24(a1)
-	PTR_ADD	a0,32
-	ld	ta1,-24(a2)
-	PTR_ADD	a1,32
-	ld	ta2,-16(a2)
-	ld	ta3,-8(a2)
-	sltu	t8,t0,ta0
-	dsubu	t0,ta0
-	dsubu	ta0,t0,v0
-	sd	ta0,-32(a0)
-	MOVNZ	(t0,v0,t8)
-
-	sltu	t9,t1,ta1
-	dsubu	t1,ta1
-	dsubu	ta1,t1,v0
-	sd	ta1,-24(a0)
-	MOVNZ	(t1,v0,t9)
-
-
-	sltu	t8,t2,ta2
-	dsubu	t2,ta2
-	dsubu	ta2,t2,v0
-	sd	ta2,-16(a0)
-	MOVNZ	(t2,v0,t8)
-
-	sltu	t9,t3,ta3
-	dsubu	t3,ta3
-	dsubu	ta3,t3,v0
-	sd	ta3,-8(a0)
-	MOVNZ	(t3,v0,t9)
-
-	.set	noreorder
-	bgtzl	AT,.L_bn_sub_words_loop
-	ld	t0,0(a1)
-
-	bnezl	a3,.L_bn_sub_words_tail
-	ld	t0,0(a1)
-	.set	reorder
-
-.L_bn_sub_words_return:
-	jr	ra
-
-.L_bn_sub_words_tail:
-	ld	ta0,0(a2)
-	subu	a3,1
-	sltu	t8,t0,ta0
-	dsubu	t0,ta0
-	dsubu	ta0,t0,v0
-	MOVNZ	(t0,v0,t8)
-	sd	ta0,0(a0)
-	beqz	a3,.L_bn_sub_words_return
-
-	ld	t1,8(a1)
-	subu	a3,1
-	ld	ta1,8(a2)
-	sltu	t9,t1,ta1
-	dsubu	t1,ta1
-	dsubu	ta1,t1,v0
-	MOVNZ	(t1,v0,t9)
-	sd	ta1,8(a0)
-	beqz	a3,.L_bn_sub_words_return
-
-	ld	t2,16(a1)
-	ld	ta2,16(a2)
-	sltu	t8,t2,ta2
-	dsubu	t2,ta2
-	dsubu	ta2,t2,v0
-	MOVNZ	(t2,v0,t8)
-	sd	ta2,16(a0)
-	jr	ra
-END(bn_sub_words)
-
-#undef	MINUS4
-
-.align 5
-LEAF(bn_div_3_words)
-	.set	reorder
-	move	a3,a0		/* we know that bn_div_words doesn't
-				 * touch a3, ta2, ta3 and preserves a2
-				 * so that we can save two arguments
-				 * and return address in registers
-				 * instead of stack:-)
-				 */
-	ld	a0,(a3)
-	move	ta2,a1
-	ld	a1,-8(a3)
-	bne	a0,a2,.L_bn_div_3_words_proceed
-	li	v0,-1
-	jr	ra
-.L_bn_div_3_words_proceed:
-	move	ta3,ra
-	bal	bn_div_words
-	move	ra,ta3
-	dmultu	ta2,v0
-	ld	t2,-16(a3)
-	move	ta0,zero
-	mfhi	t1
-	mflo	t0
-	sltu	t8,t1,v1
-.L_bn_div_3_words_inner_loop:
-	bnez	t8,.L_bn_div_3_words_inner_loop_done
-	sgeu	AT,t2,t0
-	seq	t9,t1,v1
-	and	AT,t9
-	sltu	t3,t0,ta2
-	daddu	v1,a2
-	dsubu	t1,t3
-	dsubu	t0,ta2
-	sltu	t8,t1,v1
-	sltu	ta0,v1,a2
-	or	t8,ta0
-	.set	noreorder
-	beqzl	AT,.L_bn_div_3_words_inner_loop
-	dsubu	v0,1
-	.set	reorder
-.L_bn_div_3_words_inner_loop_done:
-	jr	ra
-END(bn_div_3_words)
-
-.align	5
-LEAF(bn_div_words)
-	.set	noreorder
-	bnezl	a2,.L_bn_div_words_proceed
-	move	v1,zero
-	jr	ra
-	li	v0,-1		/* I'd rather signal div-by-zero
-				 * which can be done with 'break 7' */
-
-.L_bn_div_words_proceed:
-	bltz	a2,.L_bn_div_words_body
-	move	t9,v1
-	dsll	a2,1
-	bgtz	a2,.-4
-	addu	t9,1
-
-	.set	reorder
-	negu	t1,t9
-	li	t2,-1
-	dsll	t2,t1
-	and	t2,a0
-	dsrl	AT,a1,t1
-	.set	noreorder
-	bnezl	t2,.+8
-	break	6		/* signal overflow */
-	.set	reorder
-	dsll	a0,t9
-	dsll	a1,t9
-	or	a0,AT
-
-#define	QT	ta0
-#define	HH	ta1
-#define	DH	v1
-.L_bn_div_words_body:
-	dsrl	DH,a2,32
-	sgeu	AT,a0,a2
-	.set	noreorder
-	bnezl	AT,.+8
-	dsubu	a0,a2
-	.set	reorder
-
-	li	QT,-1
-	dsrl	HH,a0,32
-	dsrl	QT,32	/* q=0xffffffff */
-	beq	DH,HH,.L_bn_div_words_skip_div1
-	ddivu	zero,a0,DH
-	mflo	QT
-.L_bn_div_words_skip_div1:
-	dmultu	a2,QT
-	dsll	t3,a0,32
-	dsrl	AT,a1,32
-	or	t3,AT
-	mflo	t0
-	mfhi	t1
-.L_bn_div_words_inner_loop1:
-	sltu	t2,t3,t0
-	seq	t8,HH,t1
-	sltu	AT,HH,t1
-	and	t2,t8
-	sltu	v0,t0,a2
-	or	AT,t2
-	.set	noreorder
-	beqz	AT,.L_bn_div_words_inner_loop1_done
-	dsubu	t1,v0
-	dsubu	t0,a2
-	b	.L_bn_div_words_inner_loop1
-	dsubu	QT,1
-	.set	reorder
-.L_bn_div_words_inner_loop1_done:
-
-	dsll	a1,32
-	dsubu	a0,t3,t0
-	dsll	v0,QT,32
-
-	li	QT,-1
-	dsrl	HH,a0,32
-	dsrl	QT,32	/* q=0xffffffff */
-	beq	DH,HH,.L_bn_div_words_skip_div2
-	ddivu	zero,a0,DH
-	mflo	QT
-.L_bn_div_words_skip_div2:
-#undef	DH
-	dmultu	a2,QT
-	dsll	t3,a0,32
-	dsrl	AT,a1,32
-	or	t3,AT
-	mflo	t0
-	mfhi	t1
-.L_bn_div_words_inner_loop2:
-	sltu	t2,t3,t0
-	seq	t8,HH,t1
-	sltu	AT,HH,t1
-	and	t2,t8
-	sltu	v1,t0,a2
-	or	AT,t2
-	.set	noreorder
-	beqz	AT,.L_bn_div_words_inner_loop2_done
-	dsubu	t1,v1
-	dsubu	t0,a2
-	b	.L_bn_div_words_inner_loop2
-	dsubu	QT,1
-	.set	reorder
-.L_bn_div_words_inner_loop2_done:	
-#undef	HH
-
-	dsubu	a0,t3,t0
-	or	v0,QT
-	dsrl	v1,a0,t9	/* v1 contains remainder if anybody wants it */
-	dsrl	a2,t9		/* restore a2 */
-	jr	ra
-#undef	QT
-END(bn_div_words)
-
-#define	a_0	t0
-#define	a_1	t1
-#define	a_2	t2
-#define	a_3	t3
-#define	b_0	ta0
-#define	b_1	ta1
-#define	b_2	ta2
-#define	b_3	ta3
-
-#define	a_4	s0
-#define	a_5	s2
-#define	a_6	s4
-#define	a_7	a1	/* once we load a[7] we don't need a anymore */
-#define	b_4	s1
-#define	b_5	s3
-#define	b_6	s5
-#define	b_7	a2	/* once we load b[7] we don't need b anymore */
-
-#define	t_1	t8
-#define	t_2	t9
-
-#define	c_1	v0
-#define	c_2	v1
-#define	c_3	a3
-
-#define	FRAME_SIZE	48
-
-.align	5
-LEAF(bn_mul_comba8)
-	.set	noreorder
-	PTR_SUB	sp,FRAME_SIZE
-	.frame	sp,64,ra
-	.set	reorder
-	ld	a_0,0(a1)	/* If compiled with -mips3 option on
-				 * R5000 box assembler barks on this
-				 * line with "shouldn't have mult/div
-				 * as last instruction in bb (R10K
-				 * bug)" warning. If anybody out there
-				 * has a clue about how to circumvent
-				 * this do send me a note.
-				 *		<appro@fy.chalmers.se>
-				 */
-	ld	b_0,0(a2)
-	ld	a_1,8(a1)
-	ld	a_2,16(a1)
-	ld	a_3,24(a1)
-	ld	b_1,8(a2)
-	ld	b_2,16(a2)
-	ld	b_3,24(a2)
-	dmultu	a_0,b_0		/* mul_add_c(a[0],b[0],c1,c2,c3); */
-	sd	s0,0(sp)
-	sd	s1,8(sp)
-	sd	s2,16(sp)
-	sd	s3,24(sp)
-	sd	s4,32(sp)
-	sd	s5,40(sp)
-	mflo	c_1
-	mfhi	c_2
-
-	dmultu	a_0,b_1		/* mul_add_c(a[0],b[1],c2,c3,c1); */
-	ld	a_4,32(a1)
-	ld	a_5,40(a1)
-	ld	a_6,48(a1)
-	ld	a_7,56(a1)
-	ld	b_4,32(a2)
-	ld	b_5,40(a2)
-	mflo	t_1
-	mfhi	t_2
-	daddu	c_2,t_1
-	sltu	AT,c_2,t_1
-	daddu	c_3,t_2,AT
-	dmultu	a_1,b_0		/* mul_add_c(a[1],b[0],c2,c3,c1); */
-	ld	b_6,48(a2)
-	ld	b_7,56(a2)
-	sd	c_1,0(a0)	/* r[0]=c1; */
-	mflo	t_1
-	mfhi	t_2
-	daddu	c_2,t_1
-	sltu	AT,c_2,t_1
-	daddu	t_2,AT
-	daddu	c_3,t_2
-	sltu	c_1,c_3,t_2
-	sd	c_2,8(a0)	/* r[1]=c2; */
-
-	dmultu	a_2,b_0		/* mul_add_c(a[2],b[0],c3,c1,c2); */
-	mflo	t_1
-	mfhi	t_2
-	daddu	c_3,t_1
-	sltu	AT,c_3,t_1
-	daddu	t_2,AT
-	daddu	c_1,t_2
-	dmultu	a_1,b_1		/* mul_add_c(a[1],b[1],c3,c1,c2); */
-	mflo	t_1
-	mfhi	t_2
-	daddu	c_3,t_1
-	sltu	AT,c_3,t_1
-	daddu	t_2,AT
-	daddu	c_1,t_2
-	sltu	c_2,c_1,t_2
-	dmultu	a_0,b_2		/* mul_add_c(a[0],b[2],c3,c1,c2); */
-	mflo	t_1
-	mfhi	t_2
-	daddu	c_3,t_1
-	sltu	AT,c_3,t_1
-	daddu	t_2,AT
-	daddu	c_1,t_2
-	sltu	AT,c_1,t_2
-	daddu	c_2,AT
-	sd	c_3,16(a0)	/* r[2]=c3; */
-
-	dmultu	a_0,b_3		/* mul_add_c(a[0],b[3],c1,c2,c3); */
-	mflo	t_1
-	mfhi	t_2
-	daddu	c_1,t_1
-	sltu	AT,c_1,t_1
-	daddu	t_2,AT
-	daddu	c_2,t_2
-	sltu	c_3,c_2,t_2
-	dmultu	a_1,b_2		/* mul_add_c(a[1],b[2],c1,c2,c3); */
-	mflo	t_1
-	mfhi	t_2
-	daddu	c_1,t_1
-	sltu	AT,c_1,t_1
-	daddu	t_2,AT
-	daddu	c_2,t_2
-	sltu	AT,c_2,t_2
-	daddu	c_3,AT
-	dmultu	a_2,b_1		/* mul_add_c(a[2],b[1],c1,c2,c3); */
-	mflo	t_1
-	mfhi	t_2
-	daddu	c_1,t_1
-	sltu	AT,c_1,t_1
-	daddu	t_2,AT
-	daddu	c_2,t_2
-	sltu	AT,c_2,t_2
-	daddu	c_3,AT
-	dmultu	a_3,b_0		/* mul_add_c(a[3],b[0],c1,c2,c3); */
-	mflo	t_1
-	mfhi	t_2
-	daddu	c_1,t_1
-	sltu	AT,c_1,t_1
-	daddu	t_2,AT
-	daddu	c_2,t_2
-	sltu	AT,c_2,t_2
-	daddu	c_3,AT
-	sd	c_1,24(a0)	/* r[3]=c1; */
-
-	dmultu	a_4,b_0		/* mul_add_c(a[4],b[0],c2,c3,c1); */
-	mflo	t_1
-	mfhi	t_2
-	daddu	c_2,t_1
-	sltu	AT,c_2,t_1
-	daddu	t_2,AT
-	daddu	c_3,t_2
-	sltu	c_1,c_3,t_2
-	dmultu	a_3,b_1		/* mul_add_c(a[3],b[1],c2,c3,c1); */
-	mflo	t_1
-	mfhi	t_2
-	daddu	c_2,t_1
-	sltu	AT,c_2,t_1
-	daddu	t_2,AT
-	daddu	c_3,t_2
-	sltu	AT,c_3,t_2
-	daddu	c_1,AT
-	dmultu	a_2,b_2		/* mul_add_c(a[2],b[2],c2,c3,c1); */
-	mflo	t_1
-	mfhi	t_2
-	daddu	c_2,t_1
-	sltu	AT,c_2,t_1
-	daddu	t_2,AT
-	daddu	c_3,t_2
-	sltu	AT,c_3,t_2
-	daddu	c_1,AT
-	dmultu	a_1,b_3		/* mul_add_c(a[1],b[3],c2,c3,c1); */
-	mflo	t_1
-	mfhi	t_2
-	daddu	c_2,t_1
-	sltu	AT,c_2,t_1
-	daddu	t_2,AT
-	daddu	c_3,t_2
-	sltu	AT,c_3,t_2
-	daddu	c_1,AT
-	dmultu	a_0,b_4		/* mul_add_c(a[0],b[4],c2,c3,c1); */
-	mflo	t_1
-	mfhi	t_2
-	daddu	c_2,t_1
-	sltu	AT,c_2,t_1
-	daddu	t_2,AT
-	daddu	c_3,t_2
-	sltu	AT,c_3,t_2
-	daddu	c_1,AT
-	sd	c_2,32(a0)	/* r[4]=c2; */
-
-	dmultu	a_0,b_5		/* mul_add_c(a[0],b[5],c3,c1,c2); */
-	mflo	t_1
-	mfhi	t_2
-	daddu	c_3,t_1
-	sltu	AT,c_3,t_1
-	daddu	t_2,AT
-	daddu	c_1,t_2
-	sltu	c_2,c_1,t_2
-	dmultu	a_1,b_4		/* mul_add_c(a[1],b[4],c3,c1,c2); */
-	mflo	t_1
-	mfhi	t_2
-	daddu	c_3,t_1
-	sltu	AT,c_3,t_1
-	daddu	t_2,AT
-	daddu	c_1,t_2
-	sltu	AT,c_1,t_2
-	daddu	c_2,AT
-	dmultu	a_2,b_3		/* mul_add_c(a[2],b[3],c3,c1,c2); */
-	mflo	t_1
-	mfhi	t_2
-	daddu	c_3,t_1
-	sltu	AT,c_3,t_1
-	daddu	t_2,AT
-	daddu	c_1,t_2
-	sltu	AT,c_1,t_2
-	daddu	c_2,AT
-	dmultu	a_3,b_2		/* mul_add_c(a[3],b[2],c3,c1,c2); */
-	mflo	t_1
-	mfhi	t_2
-	daddu	c_3,t_1
-	sltu	AT,c_3,t_1
-	daddu	t_2,AT
-	daddu	c_1,t_2
-	sltu	AT,c_1,t_2
-	daddu	c_2,AT
-	dmultu	a_4,b_1		/* mul_add_c(a[4],b[1],c3,c1,c2); */
-	mflo	t_1
-	mfhi	t_2
-	daddu	c_3,t_1
-	sltu	AT,c_3,t_1
-	daddu	t_2,AT
-	daddu	c_1,t_2
-	sltu	AT,c_1,t_2
-	daddu	c_2,AT
-	dmultu	a_5,b_0		/* mul_add_c(a[5],b[0],c3,c1,c2); */
-	mflo	t_1
-	mfhi	t_2
-	daddu	c_3,t_1
-	sltu	AT,c_3,t_1
-	daddu	t_2,AT
-	daddu	c_1,t_2
-	sltu	AT,c_1,t_2
-	daddu	c_2,AT
-	sd	c_3,40(a0)	/* r[5]=c3; */
-
-	dmultu	a_6,b_0		/* mul_add_c(a[6],b[0],c1,c2,c3); */
-	mflo	t_1
-	mfhi	t_2
-	daddu	c_1,t_1
-	sltu	AT,c_1,t_1
-	daddu	t_2,AT
-	daddu	c_2,t_2
-	sltu	c_3,c_2,t_2
-	dmultu	a_5,b_1		/* mul_add_c(a[5],b[1],c1,c2,c3); */
-	mflo	t_1
-	mfhi	t_2
-	daddu	c_1,t_1
-	sltu	AT,c_1,t_1
-	daddu	t_2,AT
-	daddu	c_2,t_2
-	sltu	AT,c_2,t_2
-	daddu	c_3,AT
-	dmultu	a_4,b_2		/* mul_add_c(a[4],b[2],c1,c2,c3); */
-	mflo	t_1
-	mfhi	t_2
-	daddu	c_1,t_1
-	sltu	AT,c_1,t_1
-	daddu	t_2,AT
-	daddu	c_2,t_2
-	sltu	AT,c_2,t_2
-	daddu	c_3,AT
-	dmultu	a_3,b_3		/* mul_add_c(a[3],b[3],c1,c2,c3); */
-	mflo	t_1
-	mfhi	t_2
-	daddu	c_1,t_1
-	sltu	AT,c_1,t_1
-	daddu	t_2,AT
-	daddu	c_2,t_2
-	sltu	AT,c_2,t_2
-	daddu	c_3,AT
-	dmultu	a_2,b_4		/* mul_add_c(a[2],b[4],c1,c2,c3); */
-	mflo	t_1
-	mfhi	t_2
-	daddu	c_1,t_1
-	sltu	AT,c_1,t_1
-	daddu	t_2,AT
-	daddu	c_2,t_2
-	sltu	AT,c_2,t_2
-	daddu	c_3,AT
-	dmultu	a_1,b_5		/* mul_add_c(a[1],b[5],c1,c2,c3); */
-	mflo	t_1
-	mfhi	t_2
-	daddu	c_1,t_1
-	sltu	AT,c_1,t_1
-	daddu	t_2,AT
-	daddu	c_2,t_2
-	sltu	AT,c_2,t_2
-	daddu	c_3,AT
-	dmultu	a_0,b_6		/* mul_add_c(a[0],b[6],c1,c2,c3); */
-	mflo	t_1
-	mfhi	t_2
-	daddu	c_1,t_1
-	sltu	AT,c_1,t_1
-	daddu	t_2,AT
-	daddu	c_2,t_2
-	sltu	AT,c_2,t_2
-	daddu	c_3,AT
-	sd	c_1,48(a0)	/* r[6]=c1; */
-
-	dmultu	a_0,b_7		/* mul_add_c(a[0],b[7],c2,c3,c1); */
-	mflo	t_1
-	mfhi	t_2
-	daddu	c_2,t_1
-	sltu	AT,c_2,t_1
-	daddu	t_2,AT
-	daddu	c_3,t_2
-	sltu	c_1,c_3,t_2
-	dmultu	a_1,b_6		/* mul_add_c(a[1],b[6],c2,c3,c1); */
-	mflo	t_1
-	mfhi	t_2
-	daddu	c_2,t_1
-	sltu	AT,c_2,t_1
-	daddu	t_2,AT
-	daddu	c_3,t_2
-	sltu	AT,c_3,t_2
-	daddu	c_1,AT
-	dmultu	a_2,b_5		/* mul_add_c(a[2],b[5],c2,c3,c1); */
-	mflo	t_1
-	mfhi	t_2
-	daddu	c_2,t_1
-	sltu	AT,c_2,t_1
-	daddu	t_2,AT
-	daddu	c_3,t_2
-	sltu	AT,c_3,t_2
-	daddu	c_1,AT
-	dmultu	a_3,b_4		/* mul_add_c(a[3],b[4],c2,c3,c1); */
-	mflo	t_1
-	mfhi	t_2
-	daddu	c_2,t_1
-	sltu	AT,c_2,t_1
-	daddu	t_2,AT
-	daddu	c_3,t_2
-	sltu	AT,c_3,t_2
-	daddu	c_1,AT
-	dmultu	a_4,b_3		/* mul_add_c(a[4],b[3],c2,c3,c1); */
-	mflo	t_1
-	mfhi	t_2
-	daddu	c_2,t_1
-	sltu	AT,c_2,t_1
-	daddu	t_2,AT
-	daddu	c_3,t_2
-	sltu	AT,c_3,t_2
-	daddu	c_1,AT
-	dmultu	a_5,b_2		/* mul_add_c(a[5],b[2],c2,c3,c1); */
-	mflo	t_1
-	mfhi	t_2
-	daddu	c_2,t_1
-	sltu	AT,c_2,t_1
-	daddu	t_2,AT
-	daddu	c_3,t_2
-	sltu	AT,c_3,t_2
-	daddu	c_1,AT
-	dmultu	a_6,b_1		/* mul_add_c(a[6],b[1],c2,c3,c1); */
-	mflo	t_1
-	mfhi	t_2
-	daddu	c_2,t_1
-	sltu	AT,c_2,t_1
-	daddu	t_2,AT
-	daddu	c_3,t_2
-	sltu	AT,c_3,t_2
-	daddu	c_1,AT
-	dmultu	a_7,b_0		/* mul_add_c(a[7],b[0],c2,c3,c1); */
-	mflo	t_1
-	mfhi	t_2
-	daddu	c_2,t_1
-	sltu	AT,c_2,t_1
-	daddu	t_2,AT
-	daddu	c_3,t_2
-	sltu	AT,c_3,t_2
-	daddu	c_1,AT
-	sd	c_2,56(a0)	/* r[7]=c2; */
-
-	dmultu	a_7,b_1		/* mul_add_c(a[7],b[1],c3,c1,c2); */
-	mflo	t_1
-	mfhi	t_2
-	daddu	c_3,t_1
-	sltu	AT,c_3,t_1
-	daddu	t_2,AT
-	daddu	c_1,t_2
-	sltu	c_2,c_1,t_2
-	dmultu	a_6,b_2		/* mul_add_c(a[6],b[2],c3,c1,c2); */
-	mflo	t_1
-	mfhi	t_2
-	daddu	c_3,t_1
-	sltu	AT,c_3,t_1
-	daddu	t_2,AT
-	daddu	c_1,t_2
-	sltu	AT,c_1,t_2
-	daddu	c_2,AT
-	dmultu	a_5,b_3		/* mul_add_c(a[5],b[3],c3,c1,c2); */
-	mflo	t_1
-	mfhi	t_2
-	daddu	c_3,t_1
-	sltu	AT,c_3,t_1
-	daddu	t_2,AT
-	daddu	c_1,t_2
-	sltu	AT,c_1,t_2
-	daddu	c_2,AT
-	dmultu	a_4,b_4		/* mul_add_c(a[4],b[4],c3,c1,c2); */
-	mflo	t_1
-	mfhi	t_2
-	daddu	c_3,t_1
-	sltu	AT,c_3,t_1
-	daddu	t_2,AT
-	daddu	c_1,t_2
-	sltu	AT,c_1,t_2
-	daddu	c_2,AT
-	dmultu	a_3,b_5		/* mul_add_c(a[3],b[5],c3,c1,c2); */
-	mflo	t_1
-	mfhi	t_2
-	daddu	c_3,t_1
-	sltu	AT,c_3,t_1
-	daddu	t_2,AT
-	daddu	c_1,t_2
-	sltu	AT,c_1,t_2
-	daddu	c_2,AT
-	dmultu	a_2,b_6		/* mul_add_c(a[2],b[6],c3,c1,c2); */
-	mflo	t_1
-	mfhi	t_2
-	daddu	c_3,t_1
-	sltu	AT,c_3,t_1
-	daddu	t_2,AT
-	daddu	c_1,t_2
-	sltu	AT,c_1,t_2
-	daddu	c_2,AT
-	dmultu	a_1,b_7		/* mul_add_c(a[1],b[7],c3,c1,c2); */
-	mflo	t_1
-	mfhi	t_2
-	daddu	c_3,t_1
-	sltu	AT,c_3,t_1
-	daddu	t_2,AT
-	daddu	c_1,t_2
-	sltu	AT,c_1,t_2
-	daddu	c_2,AT
-	sd	c_3,64(a0)	/* r[8]=c3; */
-
-	dmultu	a_2,b_7		/* mul_add_c(a[2],b[7],c1,c2,c3); */
-	mflo	t_1
-	mfhi	t_2
-	daddu	c_1,t_1
-	sltu	AT,c_1,t_1
-	daddu	t_2,AT
-	daddu	c_2,t_2
-	sltu	c_3,c_2,t_2
-	dmultu	a_3,b_6		/* mul_add_c(a[3],b[6],c1,c2,c3); */
-	mflo	t_1
-	mfhi	t_2
-	daddu	c_1,t_1
-	sltu	AT,c_1,t_1
-	daddu	t_2,AT
-	daddu	c_2,t_2
-	sltu	AT,c_2,t_2
-	daddu	c_3,AT
-	dmultu	a_4,b_5		/* mul_add_c(a[4],b[5],c1,c2,c3); */
-	mflo	t_1
-	mfhi	t_2
-	daddu	c_1,t_1
-	sltu	AT,c_1,t_1
-	daddu	t_2,AT
-	daddu	c_2,t_2
-	sltu	AT,c_2,t_2
-	daddu	c_3,AT
-	dmultu	a_5,b_4		/* mul_add_c(a[5],b[4],c1,c2,c3); */
-	mflo	t_1
-	mfhi	t_2
-	daddu	c_1,t_1
-	sltu	AT,c_1,t_1
-	daddu	t_2,AT
-	daddu	c_2,t_2
-	sltu	AT,c_2,t_2
-	daddu	c_3,AT
-	dmultu	a_6,b_3		/* mul_add_c(a[6],b[3],c1,c2,c3); */
-	mflo	t_1
-	mfhi	t_2
-	daddu	c_1,t_1
-	sltu	AT,c_1,t_1
-	daddu	t_2,AT
-	daddu	c_2,t_2
-	sltu	AT,c_2,t_2
-	daddu	c_3,AT
-	dmultu	a_7,b_2		/* mul_add_c(a[7],b[2],c1,c2,c3); */
-	mflo	t_1
-	mfhi	t_2
-	daddu	c_1,t_1
-	sltu	AT,c_1,t_1
-	daddu	t_2,AT
-	daddu	c_2,t_2
-	sltu	AT,c_2,t_2
-	daddu	c_3,AT
-	sd	c_1,72(a0)	/* r[9]=c1; */
-
-	dmultu	a_7,b_3		/* mul_add_c(a[7],b[3],c2,c3,c1); */
-	mflo	t_1
-	mfhi	t_2
-	daddu	c_2,t_1
-	sltu	AT,c_2,t_1
-	daddu	t_2,AT
-	daddu	c_3,t_2
-	sltu	c_1,c_3,t_2
-	dmultu	a_6,b_4		/* mul_add_c(a[6],b[4],c2,c3,c1); */
-	mflo	t_1
-	mfhi	t_2
-	daddu	c_2,t_1
-	sltu	AT,c_2,t_1
-	daddu	t_2,AT
-	daddu	c_3,t_2
-	sltu	AT,c_3,t_2
-	daddu	c_1,AT
-	dmultu	a_5,b_5		/* mul_add_c(a[5],b[5],c2,c3,c1); */
-	mflo	t_1
-	mfhi	t_2
-	daddu	c_2,t_1
-	sltu	AT,c_2,t_1
-	daddu	t_2,AT
-	daddu	c_3,t_2
-	sltu	AT,c_3,t_2
-	daddu	c_1,AT
-	dmultu	a_4,b_6		/* mul_add_c(a[4],b[6],c2,c3,c1); */
-	mflo	t_1
-	mfhi	t_2
-	daddu	c_2,t_1
-	sltu	AT,c_2,t_1
-	daddu	t_2,AT
-	daddu	c_3,t_2
-	sltu	AT,c_3,t_2
-	daddu	c_1,AT
-	dmultu	a_3,b_7		/* mul_add_c(a[3],b[7],c2,c3,c1); */
-	mflo	t_1
-	mfhi	t_2
-	daddu	c_2,t_1
-	sltu	AT,c_2,t_1
-	daddu	t_2,AT
-	daddu	c_3,t_2
-	sltu	AT,c_3,t_2
-	daddu	c_1,AT
-	sd	c_2,80(a0)	/* r[10]=c2; */
-
-	dmultu	a_4,b_7		/* mul_add_c(a[4],b[7],c3,c1,c2); */
-	mflo	t_1
-	mfhi	t_2
-	daddu	c_3,t_1
-	sltu	AT,c_3,t_1
-	daddu	t_2,AT
-	daddu	c_1,t_2
-	sltu	c_2,c_1,t_2
-	dmultu	a_5,b_6		/* mul_add_c(a[5],b[6],c3,c1,c2); */
-	mflo	t_1
-	mfhi	t_2
-	daddu	c_3,t_1
-	sltu	AT,c_3,t_1
-	daddu	t_2,AT
-	daddu	c_1,t_2
-	sltu	AT,c_1,t_2
-	daddu	c_2,AT
-	dmultu	a_6,b_5		/* mul_add_c(a[6],b[5],c3,c1,c2); */
-	mflo	t_1
-	mfhi	t_2
-	daddu	c_3,t_1
-	sltu	AT,c_3,t_1
-	daddu	t_2,AT
-	daddu	c_1,t_2
-	sltu	AT,c_1,t_2
-	daddu	c_2,AT
-	dmultu	a_7,b_4		/* mul_add_c(a[7],b[4],c3,c1,c2); */
-	mflo	t_1
-	mfhi	t_2
-	daddu	c_3,t_1
-	sltu	AT,c_3,t_1
-	daddu	t_2,AT
-	daddu	c_1,t_2
-	sltu	AT,c_1,t_2
-	daddu	c_2,AT
-	sd	c_3,88(a0)	/* r[11]=c3; */
-
-	dmultu	a_7,b_5		/* mul_add_c(a[7],b[5],c1,c2,c3); */
-	mflo	t_1
-	mfhi	t_2
-	daddu	c_1,t_1
-	sltu	AT,c_1,t_1
-	daddu	t_2,AT
-	daddu	c_2,t_2
-	sltu	c_3,c_2,t_2
-	dmultu	a_6,b_6		/* mul_add_c(a[6],b[6],c1,c2,c3); */
-	mflo	t_1
-	mfhi	t_2
-	daddu	c_1,t_1
-	sltu	AT,c_1,t_1
-	daddu	t_2,AT
-	daddu	c_2,t_2
-	sltu	AT,c_2,t_2
-	daddu	c_3,AT
-	dmultu	a_5,b_7		/* mul_add_c(a[5],b[7],c1,c2,c3); */
-	mflo	t_1
-	mfhi	t_2
-	daddu	c_1,t_1
-	sltu	AT,c_1,t_1
-	daddu	t_2,AT
-	daddu	c_2,t_2
-	sltu	AT,c_2,t_2
-	daddu	c_3,AT
-	sd	c_1,96(a0)	/* r[12]=c1; */
-
-	dmultu	a_6,b_7		/* mul_add_c(a[6],b[7],c2,c3,c1); */
-	mflo	t_1
-	mfhi	t_2
-	daddu	c_2,t_1
-	sltu	AT,c_2,t_1
-	daddu	t_2,AT
-	daddu	c_3,t_2
-	sltu	c_1,c_3,t_2
-	dmultu	a_7,b_6		/* mul_add_c(a[7],b[6],c2,c3,c1); */
-	mflo	t_1
-	mfhi	t_2
-	daddu	c_2,t_1
-	sltu	AT,c_2,t_1
-	daddu	t_2,AT
-	daddu	c_3,t_2
-	sltu	AT,c_3,t_2
-	daddu	c_1,AT
-	sd	c_2,104(a0)	/* r[13]=c2; */
-
-	dmultu	a_7,b_7		/* mul_add_c(a[7],b[7],c3,c1,c2); */
-	ld	s0,0(sp)
-	ld	s1,8(sp)
-	ld	s2,16(sp)
-	ld	s3,24(sp)
-	ld	s4,32(sp)
-	ld	s5,40(sp)
-	mflo	t_1
-	mfhi	t_2
-	daddu	c_3,t_1
-	sltu	AT,c_3,t_1
-	daddu	t_2,AT
-	daddu	c_1,t_2
-	sd	c_3,112(a0)	/* r[14]=c3; */
-	sd	c_1,120(a0)	/* r[15]=c1; */
-
-	PTR_ADD	sp,FRAME_SIZE
-
-	jr	ra
-END(bn_mul_comba8)
-
-.align	5
-LEAF(bn_mul_comba4)
-	.set	reorder
-	ld	a_0,0(a1)
-	ld	b_0,0(a2)
-	ld	a_1,8(a1)
-	ld	a_2,16(a1)
-	dmultu	a_0,b_0		/* mul_add_c(a[0],b[0],c1,c2,c3); */
-	ld	a_3,24(a1)
-	ld	b_1,8(a2)
-	ld	b_2,16(a2)
-	ld	b_3,24(a2)
-	mflo	c_1
-	mfhi	c_2
-	sd	c_1,0(a0)
-
-	dmultu	a_0,b_1		/* mul_add_c(a[0],b[1],c2,c3,c1); */
-	mflo	t_1
-	mfhi	t_2
-	daddu	c_2,t_1
-	sltu	AT,c_2,t_1
-	daddu	c_3,t_2,AT
-	dmultu	a_1,b_0		/* mul_add_c(a[1],b[0],c2,c3,c1); */
-	mflo	t_1
-	mfhi	t_2
-	daddu	c_2,t_1
-	sltu	AT,c_2,t_1
-	daddu	t_2,AT
-	daddu	c_3,t_2
-	sltu	c_1,c_3,t_2
-	sd	c_2,8(a0)
-
-	dmultu	a_2,b_0		/* mul_add_c(a[2],b[0],c3,c1,c2); */
-	mflo	t_1
-	mfhi	t_2
-	daddu	c_3,t_1
-	sltu	AT,c_3,t_1
-	daddu	t_2,AT
-	daddu	c_1,t_2
-	dmultu	a_1,b_1		/* mul_add_c(a[1],b[1],c3,c1,c2); */
-	mflo	t_1
-	mfhi	t_2
-	daddu	c_3,t_1
-	sltu	AT,c_3,t_1
-	daddu	t_2,AT
-	daddu	c_1,t_2
-	sltu	c_2,c_1,t_2
-	dmultu	a_0,b_2		/* mul_add_c(a[0],b[2],c3,c1,c2); */
-	mflo	t_1
-	mfhi	t_2
-	daddu	c_3,t_1
-	sltu	AT,c_3,t_1
-	daddu	t_2,AT
-	daddu	c_1,t_2
-	sltu	AT,c_1,t_2
-	daddu	c_2,AT
-	sd	c_3,16(a0)
-
-	dmultu	a_0,b_3		/* mul_add_c(a[0],b[3],c1,c2,c3); */
-	mflo	t_1
-	mfhi	t_2
-	daddu	c_1,t_1
-	sltu	AT,c_1,t_1
-	daddu	t_2,AT
-	daddu	c_2,t_2
-	sltu	c_3,c_2,t_2
-	dmultu	a_1,b_2		/* mul_add_c(a[1],b[2],c1,c2,c3); */
-	mflo	t_1
-	mfhi	t_2
-	daddu	c_1,t_1
-	sltu	AT,c_1,t_1
-	daddu	t_2,AT
-	daddu	c_2,t_2
-	sltu	AT,c_2,t_2
-	daddu	c_3,AT
-	dmultu	a_2,b_1		/* mul_add_c(a[2],b[1],c1,c2,c3); */
-	mflo	t_1
-	mfhi	t_2
-	daddu	c_1,t_1
-	sltu	AT,c_1,t_1
-	daddu	t_2,AT
-	daddu	c_2,t_2
-	sltu	AT,c_2,t_2
-	daddu	c_3,AT
-	dmultu	a_3,b_0		/* mul_add_c(a[3],b[0],c1,c2,c3); */
-	mflo	t_1
-	mfhi	t_2
-	daddu	c_1,t_1
-	sltu	AT,c_1,t_1
-	daddu	t_2,AT
-	daddu	c_2,t_2
-	sltu	AT,c_2,t_2
-	daddu	c_3,AT
-	sd	c_1,24(a0)
-
-	dmultu	a_3,b_1		/* mul_add_c(a[3],b[1],c2,c3,c1); */
-	mflo	t_1
-	mfhi	t_2
-	daddu	c_2,t_1
-	sltu	AT,c_2,t_1
-	daddu	t_2,AT
-	daddu	c_3,t_2
-	sltu	c_1,c_3,t_2
-	dmultu	a_2,b_2		/* mul_add_c(a[2],b[2],c2,c3,c1); */
-	mflo	t_1
-	mfhi	t_2
-	daddu	c_2,t_1
-	sltu	AT,c_2,t_1
-	daddu	t_2,AT
-	daddu	c_3,t_2
-	sltu	AT,c_3,t_2
-	daddu	c_1,AT
-	dmultu	a_1,b_3		/* mul_add_c(a[1],b[3],c2,c3,c1); */
-	mflo	t_1
-	mfhi	t_2
-	daddu	c_2,t_1
-	sltu	AT,c_2,t_1
-	daddu	t_2,AT
-	daddu	c_3,t_2
-	sltu	AT,c_3,t_2
-	daddu	c_1,AT
-	sd	c_2,32(a0)
-
-	dmultu	a_2,b_3		/* mul_add_c(a[2],b[3],c3,c1,c2); */
-	mflo	t_1
-	mfhi	t_2
-	daddu	c_3,t_1
-	sltu	AT,c_3,t_1
-	daddu	t_2,AT
-	daddu	c_1,t_2
-	sltu	c_2,c_1,t_2
-	dmultu	a_3,b_2		/* mul_add_c(a[3],b[2],c3,c1,c2); */
-	mflo	t_1
-	mfhi	t_2
-	daddu	c_3,t_1
-	sltu	AT,c_3,t_1
-	daddu	t_2,AT
-	daddu	c_1,t_2
-	sltu	AT,c_1,t_2
-	daddu	c_2,AT
-	sd	c_3,40(a0)
-
-	dmultu	a_3,b_3		/* mul_add_c(a[3],b[3],c1,c2,c3); */
-	mflo	t_1
-	mfhi	t_2
-	daddu	c_1,t_1
-	sltu	AT,c_1,t_1
-	daddu	t_2,AT
-	daddu	c_2,t_2
-	sd	c_1,48(a0)
-	sd	c_2,56(a0)
-
-	jr	ra
-END(bn_mul_comba4)
-
-#undef	a_4
-#undef	a_5
-#undef	a_6
-#undef	a_7
-#define	a_4	b_0
-#define	a_5	b_1
-#define	a_6	b_2
-#define	a_7	b_3
-
-.align	5
-LEAF(bn_sqr_comba8)
-	.set	reorder
-	ld	a_0,0(a1)
-	ld	a_1,8(a1)
-	ld	a_2,16(a1)
-	ld	a_3,24(a1)
-
-	dmultu	a_0,a_0		/* mul_add_c(a[0],b[0],c1,c2,c3); */
-	ld	a_4,32(a1)
-	ld	a_5,40(a1)
-	ld	a_6,48(a1)
-	ld	a_7,56(a1)
-	mflo	c_1
-	mfhi	c_2
-	sd	c_1,0(a0)
-
-	dmultu	a_0,a_1		/* mul_add_c2(a[0],b[1],c2,c3,c1); */
-	mflo	t_1
-	mfhi	t_2
-	slt	c_1,t_2,zero
-	dsll	t_2,1
-	slt	a2,t_1,zero
-	daddu	t_2,a2
-	dsll	t_1,1
-	daddu	c_2,t_1
-	sltu	AT,c_2,t_1
-	daddu	c_3,t_2,AT
-	sd	c_2,8(a0)
-
-	dmultu	a_2,a_0		/* mul_add_c2(a[2],b[0],c3,c1,c2); */
-	mflo	t_1
-	mfhi	t_2
-	slt	c_2,t_2,zero
-	dsll	t_2,1
-	slt	a2,t_1,zero
-	daddu	t_2,a2
-	dsll	t_1,1
-	daddu	c_3,t_1
-	sltu	AT,c_3,t_1
-	daddu	t_2,AT
-	daddu	c_1,t_2
-	sltu	AT,c_1,t_2
-	daddu	c_2,AT
-	dmultu	a_1,a_1		/* mul_add_c(a[1],b[1],c3,c1,c2); */
-	mflo	t_1
-	mfhi	t_2
-	daddu	c_3,t_1
-	sltu	AT,c_3,t_1
-	daddu	t_2,AT
-	daddu	c_1,t_2
-	sltu	AT,c_1,t_2
-	daddu	c_2,AT
-	sd	c_3,16(a0)
-
-	dmultu	a_0,a_3		/* mul_add_c2(a[0],b[3],c1,c2,c3); */
-	mflo	t_1
-	mfhi	t_2
-	slt	c_3,t_2,zero
-	dsll	t_2,1
-	slt	a2,t_1,zero
-	daddu	t_2,a2
-	dsll	t_1,1
-	daddu	c_1,t_1
-	sltu	AT,c_1,t_1
-	daddu	t_2,AT
-	daddu	c_2,t_2
-	sltu	AT,c_2,t_2
-	daddu	c_3,AT
-	dmultu	a_1,a_2		/* mul_add_c2(a[1],b[2],c1,c2,c3); */
-	mflo	t_1
-	mfhi	t_2
-	slt	AT,t_2,zero
-	daddu	c_3,AT
-	dsll	t_2,1
-	slt	a2,t_1,zero
-	daddu	t_2,a2
-	dsll	t_1,1
-	daddu	c_1,t_1
-	sltu	AT,c_1,t_1
-	daddu	t_2,AT
-	daddu	c_2,t_2
-	sltu	AT,c_2,t_2
-	daddu	c_3,AT
-	sd	c_1,24(a0)
-
-	dmultu	a_4,a_0		/* mul_add_c2(a[4],b[0],c2,c3,c1); */
-	mflo	t_1
-	mfhi	t_2
-	slt	c_1,t_2,zero
-	dsll	t_2,1
-	slt	a2,t_1,zero
-	daddu	t_2,a2
-	dsll	t_1,1
-	daddu	c_2,t_1
-	sltu	AT,c_2,t_1
-	daddu	t_2,AT
-	daddu	c_3,t_2
-	sltu	AT,c_3,t_2
-	daddu	c_1,AT
-	dmultu	a_3,a_1		/* mul_add_c2(a[3],b[1],c2,c3,c1); */
-	mflo	t_1
-	mfhi	t_2
-	slt	AT,t_2,zero
-	daddu	c_1,AT
-	dsll	t_2,1
-	slt	a2,t_1,zero
-	daddu	t_2,a2
-	dsll	t_1,1
-	daddu	c_2,t_1
-	sltu	AT,c_2,t_1
-	daddu	t_2,AT
-	daddu	c_3,t_2
-	sltu	AT,c_3,t_2
-	daddu	c_1,AT
-	dmultu	a_2,a_2		/* mul_add_c(a[2],b[2],c2,c3,c1); */
-	mflo	t_1
-	mfhi	t_2
-	daddu	c_2,t_1
-	sltu	AT,c_2,t_1
-	daddu	t_2,AT
-	daddu	c_3,t_2
-	sltu	AT,c_3,t_2
-	daddu	c_1,AT
-	sd	c_2,32(a0)
-
-	dmultu	a_0,a_5		/* mul_add_c2(a[0],b[5],c3,c1,c2); */
-	mflo	t_1
-	mfhi	t_2
-	slt	c_2,t_2,zero
-	dsll	t_2,1
-	slt	a2,t_1,zero
-	daddu	t_2,a2
-	dsll	t_1,1
-	daddu	c_3,t_1
-	sltu	AT,c_3,t_1
-	daddu	t_2,AT
-	daddu	c_1,t_2
-	sltu	AT,c_1,t_2
-	daddu	c_2,AT
-	dmultu	a_1,a_4		/* mul_add_c2(a[1],b[4],c3,c1,c2); */
-	mflo	t_1
-	mfhi	t_2
-	slt	AT,t_2,zero
-	daddu	c_2,AT
-	dsll	t_2,1
-	slt	a2,t_1,zero
-	daddu	t_2,a2
-	dsll	t_1,1
-	daddu	c_3,t_1
-	sltu	AT,c_3,t_1
-	daddu	t_2,AT
-	daddu	c_1,t_2
-	sltu	AT,c_1,t_2
-	daddu	c_2,AT
-	dmultu	a_2,a_3		/* mul_add_c2(a[2],b[3],c3,c1,c2); */
-	mflo	t_1
-	mfhi	t_2
-	slt	AT,t_2,zero
-	daddu	c_2,AT
-	dsll	t_2,1
-	slt	a2,t_1,zero
-	daddu	t_2,a2
-	dsll	t_1,1
-	daddu	c_3,t_1
-	sltu	AT,c_3,t_1
-	daddu	t_2,AT
-	daddu	c_1,t_2
-	sltu	AT,c_1,t_2
-	daddu	c_2,AT
-	sd	c_3,40(a0)
-
-	dmultu	a_6,a_0		/* mul_add_c2(a[6],b[0],c1,c2,c3); */
-	mflo	t_1
-	mfhi	t_2
-	slt	c_3,t_2,zero
-	dsll	t_2,1
-	slt	a2,t_1,zero
-	daddu	t_2,a2
-	dsll	t_1,1
-	daddu	c_1,t_1
-	sltu	AT,c_1,t_1
-	daddu	t_2,AT
-	daddu	c_2,t_2
-	sltu	AT,c_2,t_2
-	daddu	c_3,AT
-	dmultu	a_5,a_1		/* mul_add_c2(a[5],b[1],c1,c2,c3); */
-	mflo	t_1
-	mfhi	t_2
-	slt	AT,t_2,zero
-	daddu	c_3,AT
-	dsll	t_2,1
-	slt	a2,t_1,zero
-	daddu	t_2,a2
-	dsll	t_1,1
-	daddu	c_1,t_1
-	sltu	AT,c_1,t_1
-	daddu	t_2,AT
-	daddu	c_2,t_2
-	sltu	AT,c_2,t_2
-	daddu	c_3,AT
-	dmultu	a_4,a_2		/* mul_add_c2(a[4],b[2],c1,c2,c3); */
-	mflo	t_1
-	mfhi	t_2
-	slt	AT,t_2,zero
-	daddu	c_3,AT
-	dsll	t_2,1
-	slt	a2,t_1,zero
-	daddu	t_2,a2
-	dsll	t_1,1
-	daddu	c_1,t_1
-	sltu	AT,c_1,t_1
-	daddu	t_2,AT
-	daddu	c_2,t_2
-	sltu	AT,c_2,t_2
-	daddu	c_3,AT
-	dmultu	a_3,a_3		/* mul_add_c(a[3],b[3],c1,c2,c3); */
-	mflo	t_1
-	mfhi	t_2
-	daddu	c_1,t_1
-	sltu	AT,c_1,t_1
-	daddu	t_2,AT
-	daddu	c_2,t_2
-	sltu	AT,c_2,t_2
-	daddu	c_3,AT
-	sd	c_1,48(a0)
-
-	dmultu	a_0,a_7		/* mul_add_c2(a[0],b[7],c2,c3,c1); */
-	mflo	t_1
-	mfhi	t_2
-	slt	c_1,t_2,zero
-	dsll	t_2,1
-	slt	a2,t_1,zero
-	daddu	t_2,a2
-	dsll	t_1,1
-	daddu	c_2,t_1
-	sltu	AT,c_2,t_1
-	daddu	t_2,AT
-	daddu	c_3,t_2
-	sltu	AT,c_3,t_2
-	daddu	c_1,AT
-	dmultu	a_1,a_6		/* mul_add_c2(a[1],b[6],c2,c3,c1); */
-	mflo	t_1
-	mfhi	t_2
-	slt	AT,t_2,zero
-	daddu	c_1,AT
-	dsll	t_2,1
-	slt	a2,t_1,zero
-	daddu	t_2,a2
-	dsll	t_1,1
-	daddu	c_2,t_1
-	sltu	AT,c_2,t_1
-	daddu	t_2,AT
-	daddu	c_3,t_2
-	sltu	AT,c_3,t_2
-	daddu	c_1,AT
-	dmultu	a_2,a_5		/* mul_add_c2(a[2],b[5],c2,c3,c1); */
-	mflo	t_1
-	mfhi	t_2
-	slt	AT,t_2,zero
-	daddu	c_1,AT
-	dsll	t_2,1
-	slt	a2,t_1,zero
-	daddu	t_2,a2
-	dsll	t_1,1
-	daddu	c_2,t_1
-	sltu	AT,c_2,t_1
-	daddu	t_2,AT
-	daddu	c_3,t_2
-	sltu	AT,c_3,t_2
-	daddu	c_1,AT
-	dmultu	a_3,a_4		/* mul_add_c2(a[3],b[4],c2,c3,c1); */
-	mflo	t_1
-	mfhi	t_2
-	slt	AT,t_2,zero
-	daddu	c_1,AT
-	dsll	t_2,1
-	slt	a2,t_1,zero
-	daddu	t_2,a2
-	dsll	t_1,1
-	daddu	c_2,t_1
-	sltu	AT,c_2,t_1
-	daddu	t_2,AT
-	daddu	c_3,t_2
-	sltu	AT,c_3,t_2
-	daddu	c_1,AT
-	sd	c_2,56(a0)
-
-	dmultu	a_7,a_1		/* mul_add_c2(a[7],b[1],c3,c1,c2); */
-	mflo	t_1
-	mfhi	t_2
-	slt	c_2,t_2,zero
-	dsll	t_2,1
-	slt	a2,t_1,zero
-	daddu	t_2,a2
-	dsll	t_1,1
-	daddu	c_3,t_1
-	sltu	AT,c_3,t_1
-	daddu	t_2,AT
-	daddu	c_1,t_2
-	sltu	AT,c_1,t_2
-	daddu	c_2,AT
-	dmultu	a_6,a_2		/* mul_add_c2(a[6],b[2],c3,c1,c2); */
-	mflo	t_1
-	mfhi	t_2
-	slt	AT,t_2,zero
-	daddu	c_2,AT
-	dsll	t_2,1
-	slt	a2,t_1,zero
-	daddu	t_2,a2
-	dsll	t_1,1
-	daddu	c_3,t_1
-	sltu	AT,c_3,t_1
-	daddu	t_2,AT
-	daddu	c_1,t_2
-	sltu	AT,c_1,t_2
-	daddu	c_2,AT
-	dmultu	a_5,a_3		/* mul_add_c2(a[5],b[3],c3,c1,c2); */
-	mflo	t_1
-	mfhi	t_2
-	slt	AT,t_2,zero
-	daddu	c_2,AT
-	dsll	t_2,1
-	slt	a2,t_1,zero
-	daddu	t_2,a2
-	dsll	t_1,1
-	daddu	c_3,t_1
-	sltu	AT,c_3,t_1
-	daddu	t_2,AT
-	daddu	c_1,t_2
-	sltu	AT,c_1,t_2
-	daddu	c_2,AT
-	dmultu	a_4,a_4		/* mul_add_c(a[4],b[4],c3,c1,c2); */
-	mflo	t_1
-	mfhi	t_2
-	daddu	c_3,t_1
-	sltu	AT,c_3,t_1
-	daddu	t_2,AT
-	daddu	c_1,t_2
-	sltu	AT,c_1,t_2
-	daddu	c_2,AT
-	sd	c_3,64(a0)
-
-	dmultu	a_2,a_7		/* mul_add_c2(a[2],b[7],c1,c2,c3); */
-	mflo	t_1
-	mfhi	t_2
-	slt	c_3,t_2,zero
-	dsll	t_2,1
-	slt	a2,t_1,zero
-	daddu	t_2,a2
-	dsll	t_1,1
-	daddu	c_1,t_1
-	sltu	AT,c_1,t_1
-	daddu	t_2,AT
-	daddu	c_2,t_2
-	sltu	AT,c_2,t_2
-	daddu	c_3,AT
-	dmultu	a_3,a_6		/* mul_add_c2(a[3],b[6],c1,c2,c3); */
-	mflo	t_1
-	mfhi	t_2
-	slt	AT,t_2,zero
-	daddu	c_3,AT
-	dsll	t_2,1
-	slt	a2,t_1,zero
-	daddu	t_2,a2
-	dsll	t_1,1
-	daddu	c_1,t_1
-	sltu	AT,c_1,t_1
-	daddu	t_2,AT
-	daddu	c_2,t_2
-	sltu	AT,c_2,t_2
-	daddu	c_3,AT
-	dmultu	a_4,a_5		/* mul_add_c2(a[4],b[5],c1,c2,c3); */
-	mflo	t_1
-	mfhi	t_2
-	slt	AT,t_2,zero
-	daddu	c_3,AT
-	dsll	t_2,1
-	slt	a2,t_1,zero
-	daddu	t_2,a2
-	dsll	t_1,1
-	daddu	c_1,t_1
-	sltu	AT,c_1,t_1
-	daddu	t_2,AT
-	daddu	c_2,t_2
-	sltu	AT,c_2,t_2
-	daddu	c_3,AT
-	sd	c_1,72(a0)
-
-	dmultu	a_7,a_3		/* mul_add_c2(a[7],b[3],c2,c3,c1); */
-	mflo	t_1
-	mfhi	t_2
-	slt	c_1,t_2,zero
-	dsll	t_2,1
-	slt	a2,t_1,zero
-	daddu	t_2,a2
-	dsll	t_1,1
-	daddu	c_2,t_1
-	sltu	AT,c_2,t_1
-	daddu	t_2,AT
-	daddu	c_3,t_2
-	sltu	AT,c_3,t_2
-	daddu	c_1,AT
-	dmultu	a_6,a_4		/* mul_add_c2(a[6],b[4],c2,c3,c1); */
-	mflo	t_1
-	mfhi	t_2
-	slt	AT,t_2,zero
-	daddu	c_1,AT
-	dsll	t_2,1
-	slt	a2,t_1,zero
-	daddu	t_2,a2
-	dsll	t_1,1
-	daddu	c_2,t_1
-	sltu	AT,c_2,t_1
-	daddu	t_2,AT
-	daddu	c_3,t_2
-	sltu	AT,c_3,t_2
-	daddu	c_1,AT
-	dmultu	a_5,a_5		/* mul_add_c(a[5],b[5],c2,c3,c1); */
-	mflo	t_1
-	mfhi	t_2
-	daddu	c_2,t_1
-	sltu	AT,c_2,t_1
-	daddu	t_2,AT
-	daddu	c_3,t_2
-	sltu	AT,c_3,t_2
-	daddu	c_1,AT
-	sd	c_2,80(a0)
-
-	dmultu	a_4,a_7		/* mul_add_c2(a[4],b[7],c3,c1,c2); */
-	mflo	t_1
-	mfhi	t_2
-	slt	c_2,t_2,zero
-	dsll	t_2,1
-	slt	a2,t_1,zero
-	daddu	t_2,a2
-	dsll	t_1,1
-	daddu	c_3,t_1
-	sltu	AT,c_3,t_1
-	daddu	t_2,AT
-	daddu	c_1,t_2
-	sltu	AT,c_1,t_2
-	daddu	c_2,AT
-	dmultu	a_5,a_6		/* mul_add_c2(a[5],b[6],c3,c1,c2); */
-	mflo	t_1
-	mfhi	t_2
-	slt	AT,t_2,zero
-	daddu	c_2,AT
-	dsll	t_2,1
-	slt	a2,t_1,zero
-	daddu	t_2,a2
-	dsll	t_1,1
-	daddu	c_3,t_1
-	sltu	AT,c_3,t_1
-	daddu	t_2,AT
-	daddu	c_1,t_2
-	sltu	AT,c_1,t_2
-	daddu	c_2,AT
-	sd	c_3,88(a0)
-
-	dmultu	a_7,a_5		/* mul_add_c2(a[7],b[5],c1,c2,c3); */
-	mflo	t_1
-	mfhi	t_2
-	slt	c_3,t_2,zero
-	dsll	t_2,1
-	slt	a2,t_1,zero
-	daddu	t_2,a2
-	dsll	t_1,1
-	daddu	c_1,t_1
-	sltu	AT,c_1,t_1
-	daddu	t_2,AT
-	daddu	c_2,t_2
-	sltu	AT,c_2,t_2
-	daddu	c_3,AT
-	dmultu	a_6,a_6		/* mul_add_c(a[6],b[6],c1,c2,c3); */
-	mflo	t_1
-	mfhi	t_2
-	daddu	c_1,t_1
-	sltu	AT,c_1,t_1
-	daddu	t_2,AT
-	daddu	c_2,t_2
-	sltu	AT,c_2,t_2
-	daddu	c_3,AT
-	sd	c_1,96(a0)
-
-	dmultu	a_6,a_7		/* mul_add_c2(a[6],b[7],c2,c3,c1); */
-	mflo	t_1
-	mfhi	t_2
-	slt	c_1,t_2,zero
-	dsll	t_2,1
-	slt	a2,t_1,zero
-	daddu	t_2,a2
-	dsll	t_1,1
-	daddu	c_2,t_1
-	sltu	AT,c_2,t_1
-	daddu	t_2,AT
-	daddu	c_3,t_2
-	sltu	AT,c_3,t_2
-	daddu	c_1,AT
-	sd	c_2,104(a0)
-
-	dmultu	a_7,a_7		/* mul_add_c(a[7],b[7],c3,c1,c2); */
-	mflo	t_1
-	mfhi	t_2
-	daddu	c_3,t_1
-	sltu	AT,c_3,t_1
-	daddu	t_2,AT
-	daddu	c_1,t_2
-	sd	c_3,112(a0)
-	sd	c_1,120(a0)
-
-	jr	ra
-END(bn_sqr_comba8)
-
-.align	5
-LEAF(bn_sqr_comba4)
-	.set	reorder
-	ld	a_0,0(a1)
-	ld	a_1,8(a1)
-	ld	a_2,16(a1)
-	ld	a_3,24(a1)
-	dmultu	a_0,a_0		/* mul_add_c(a[0],b[0],c1,c2,c3); */
-	mflo	c_1
-	mfhi	c_2
-	sd	c_1,0(a0)
-
-	dmultu	a_0,a_1		/* mul_add_c2(a[0],b[1],c2,c3,c1); */
-	mflo	t_1
-	mfhi	t_2
-	slt	c_1,t_2,zero
-	dsll	t_2,1
-	slt	a2,t_1,zero
-	daddu	t_2,a2
-	dsll	t_1,1
-	daddu	c_2,t_1
-	sltu	AT,c_2,t_1
-	daddu	c_3,t_2,AT
-	sd	c_2,8(a0)
-
-	dmultu	a_2,a_0		/* mul_add_c2(a[2],b[0],c3,c1,c2); */
-	mflo	t_1
-	mfhi	t_2
-	slt	c_2,t_2,zero
-	dsll	t_2,1
-	slt	a2,t_1,zero
-	daddu	t_2,a2
-	dsll	t_1,1
-	daddu	c_3,t_1
-	sltu	AT,c_3,t_1
-	daddu	t_2,AT
-	daddu	c_1,t_2
-	sltu	AT,c_1,t_2
-	daddu	c_2,AT
-	dmultu	a_1,a_1		/* mul_add_c(a[1],b[1],c3,c1,c2); */
-	mflo	t_1
-	mfhi	t_2
-	daddu	c_3,t_1
-	sltu	AT,c_3,t_1
-	daddu	t_2,AT
-	daddu	c_1,t_2
-	sltu	AT,c_1,t_2
-	daddu	c_2,AT
-	sd	c_3,16(a0)
-
-	dmultu	a_0,a_3		/* mul_add_c2(a[0],b[3],c1,c2,c3); */
-	mflo	t_1
-	mfhi	t_2
-	slt	c_3,t_2,zero
-	dsll	t_2,1
-	slt	a2,t_1,zero
-	daddu	t_2,a2
-	dsll	t_1,1
-	daddu	c_1,t_1
-	sltu	AT,c_1,t_1
-	daddu	t_2,AT
-	daddu	c_2,t_2
-	sltu	AT,c_2,t_2
-	daddu	c_3,AT
-	dmultu	a_1,a_2		/* mul_add_c(a2[1],b[2],c1,c2,c3); */
-	mflo	t_1
-	mfhi	t_2
-	slt	AT,t_2,zero
-	daddu	c_3,AT
-	dsll	t_2,1
-	slt	a2,t_1,zero
-	daddu	t_2,a2
-	dsll	t_1,1
-	daddu	c_1,t_1
-	sltu	AT,c_1,t_1
-	daddu	t_2,AT
-	daddu	c_2,t_2
-	sltu	AT,c_2,t_2
-	daddu	c_3,AT
-	sd	c_1,24(a0)
-
-	dmultu	a_3,a_1		/* mul_add_c2(a[3],b[1],c2,c3,c1); */
-	mflo	t_1
-	mfhi	t_2
-	slt	c_1,t_2,zero
-	dsll	t_2,1
-	slt	a2,t_1,zero
-	daddu	t_2,a2
-	dsll	t_1,1
-	daddu	c_2,t_1
-	sltu	AT,c_2,t_1
-	daddu	t_2,AT
-	daddu	c_3,t_2
-	sltu	AT,c_3,t_2
-	daddu	c_1,AT
-	dmultu	a_2,a_2		/* mul_add_c(a[2],b[2],c2,c3,c1); */
-	mflo	t_1
-	mfhi	t_2
-	daddu	c_2,t_1
-	sltu	AT,c_2,t_1
-	daddu	t_2,AT
-	daddu	c_3,t_2
-	sltu	AT,c_3,t_2
-	daddu	c_1,AT
-	sd	c_2,32(a0)
-
-	dmultu	a_2,a_3		/* mul_add_c2(a[2],b[3],c3,c1,c2); */
-	mflo	t_1
-	mfhi	t_2
-	slt	c_2,t_2,zero
-	dsll	t_2,1
-	slt	a2,t_1,zero
-	daddu	t_2,a2
-	dsll	t_1,1
-	daddu	c_3,t_1
-	sltu	AT,c_3,t_1
-	daddu	t_2,AT
-	daddu	c_1,t_2
-	sltu	AT,c_1,t_2
-	daddu	c_2,AT
-	sd	c_3,40(a0)
-
-	dmultu	a_3,a_3		/* mul_add_c(a[3],b[3],c1,c2,c3); */
-	mflo	t_1
-	mfhi	t_2
-	daddu	c_1,t_1
-	sltu	AT,c_1,t_1
-	daddu	t_2,AT
-	daddu	c_2,t_2
-	sd	c_1,48(a0)
-	sd	c_2,56(a0)
-
-	jr	ra
-END(bn_sqr_comba4)
diff --git a/crypto/openssl/crypto/bn/asm/pa-risc.s b/crypto/openssl/crypto/bn/asm/pa-risc.s
deleted file mode 100644
index 775130a1912e..000000000000
--- a/crypto/openssl/crypto/bn/asm/pa-risc.s
+++ /dev/null
@@ -1,710 +0,0 @@
-	.SPACE $PRIVATE$
-	.SUBSPA $DATA$,QUAD=1,ALIGN=8,ACCESS=31
-	.SUBSPA $BSS$,QUAD=1,ALIGN=8,ACCESS=31,ZERO,SORT=82
-	.SPACE $TEXT$
-	.SUBSPA $LIT$,QUAD=0,ALIGN=8,ACCESS=44
-	.SUBSPA $CODE$,QUAD=0,ALIGN=8,ACCESS=44,CODE_ONLY
-	.IMPORT $global$,DATA
-	.IMPORT $$dyncall,MILLICODE
-; gcc_compiled.:
-	.SPACE $TEXT$
-	.SUBSPA $CODE$
-
-	.align 4
-	.EXPORT bn_mul_add_words,ENTRY,PRIV_LEV=3,ARGW0=GR,ARGW1=GR,ARGW2=GR,ARGW3=GR,RTNVAL=GR
-bn_mul_add_words
-	.PROC
-	.CALLINFO FRAME=0,CALLS,SAVE_RP
-	.ENTRY
-	stw %r2,-20(0,%r30)
-	ldi 0,%r28
-	extru %r23,31,16,%r2
-	stw %r2,-16(0,%r30)
-	extru %r23,15,16,%r23
-	ldil L'65536,%r31
-	fldws -16(0,%r30),%fr11R
-	stw %r23,-16(0,%r30)
-	ldo 12(%r25),%r29
-	ldo 12(%r26),%r23
-	fldws -16(0,%r30),%fr11L
-L$0002
-	ldw 0(0,%r25),%r19
-	extru %r19,31,16,%r20
-	stw %r20,-16(0,%r30)
-	extru %r19,15,16,%r19
-	fldws -16(0,%r30),%fr22L
-	stw %r19,-16(0,%r30)
-	xmpyu %fr22L,%fr11R,%fr8
-	fldws -16(0,%r30),%fr22L
-	fstws %fr8R,-16(0,%r30)
-	xmpyu %fr11R,%fr22L,%fr10
-	ldw -16(0,%r30),%r2
-	stw %r20,-16(0,%r30)
-	xmpyu %fr22L,%fr11L,%fr9
-	fldws -16(0,%r30),%fr22L
-	fstws %fr10R,-16(0,%r30)
-	copy %r2,%r22
-	ldw -16(0,%r30),%r2
-	fstws %fr9R,-16(0,%r30)
-	xmpyu %fr11L,%fr22L,%fr8
-	copy %r2,%r19
-	ldw -16(0,%r30),%r2
-	fstws %fr8R,-16(0,%r30)
-	copy %r2,%r20
-	ldw -16(0,%r30),%r2
-	addl %r2,%r19,%r21
-	comclr,<<= %r19,%r21,0
-	addl %r20,%r31,%r20
-L$0005
-	extru %r21,15,16,%r19
-	addl %r20,%r19,%r20
-	zdep %r21,15,16,%r19
-	addl %r22,%r19,%r22
-	comclr,<<= %r19,%r22,0
-	addi,tr 1,%r20,%r19
-	copy %r20,%r19
-	addl %r22,%r28,%r20
-	comclr,<<= %r28,%r20,0
-	addi 1,%r19,%r19
-	ldw 0(0,%r26),%r28
-	addl %r20,%r28,%r20
-	comclr,<<= %r28,%r20,0
-	addi,tr 1,%r19,%r28
-	copy %r19,%r28
-	addib,= -1,%r24,L$0003
-	stw %r20,0(0,%r26)
-	ldw -8(0,%r29),%r19
-	extru %r19,31,16,%r20
-	stw %r20,-16(0,%r30)
-	extru %r19,15,16,%r19
-	fldws -16(0,%r30),%fr22L
-	stw %r19,-16(0,%r30)
-	xmpyu %fr22L,%fr11R,%fr8
-	fldws -16(0,%r30),%fr22L
-	fstws %fr8R,-16(0,%r30)
-	xmpyu %fr11R,%fr22L,%fr10
-	ldw -16(0,%r30),%r2
-	stw %r20,-16(0,%r30)
-	xmpyu %fr22L,%fr11L,%fr9
-	fldws -16(0,%r30),%fr22L
-	fstws %fr10R,-16(0,%r30)
-	copy %r2,%r22
-	ldw -16(0,%r30),%r2
-	fstws %fr9R,-16(0,%r30)
-	xmpyu %fr11L,%fr22L,%fr8
-	copy %r2,%r19
-	ldw -16(0,%r30),%r2
-	fstws %fr8R,-16(0,%r30)
-	copy %r2,%r20
-	ldw -16(0,%r30),%r2
-	addl %r2,%r19,%r21
-	comclr,<<= %r19,%r21,0
-	addl %r20,%r31,%r20
-L$0010
-	extru %r21,15,16,%r19
-	addl %r20,%r19,%r20
-	zdep %r21,15,16,%r19
-	addl %r22,%r19,%r22
-	comclr,<<= %r19,%r22,0
-	addi,tr 1,%r20,%r19
-	copy %r20,%r19
-	addl %r22,%r28,%r20
-	comclr,<<= %r28,%r20,0
-	addi 1,%r19,%r19
-	ldw -8(0,%r23),%r28
-	addl %r20,%r28,%r20
-	comclr,<<= %r28,%r20,0
-	addi,tr 1,%r19,%r28
-	copy %r19,%r28
-	addib,= -1,%r24,L$0003
-	stw %r20,-8(0,%r23)
-	ldw -4(0,%r29),%r19
-	extru %r19,31,16,%r20
-	stw %r20,-16(0,%r30)
-	extru %r19,15,16,%r19
-	fldws -16(0,%r30),%fr22L
-	stw %r19,-16(0,%r30)
-	xmpyu %fr22L,%fr11R,%fr8
-	fldws -16(0,%r30),%fr22L
-	fstws %fr8R,-16(0,%r30)
-	xmpyu %fr11R,%fr22L,%fr10
-	ldw -16(0,%r30),%r2
-	stw %r20,-16(0,%r30)
-	xmpyu %fr22L,%fr11L,%fr9
-	fldws -16(0,%r30),%fr22L
-	fstws %fr10R,-16(0,%r30)
-	copy %r2,%r22
-	ldw -16(0,%r30),%r2
-	fstws %fr9R,-16(0,%r30)
-	xmpyu %fr11L,%fr22L,%fr8
-	copy %r2,%r19
-	ldw -16(0,%r30),%r2
-	fstws %fr8R,-16(0,%r30)
-	copy %r2,%r20
-	ldw -16(0,%r30),%r2
-	addl %r2,%r19,%r21
-	comclr,<<= %r19,%r21,0
-	addl %r20,%r31,%r20
-L$0015
-	extru %r21,15,16,%r19
-	addl %r20,%r19,%r20
-	zdep %r21,15,16,%r19
-	addl %r22,%r19,%r22
-	comclr,<<= %r19,%r22,0
-	addi,tr 1,%r20,%r19
-	copy %r20,%r19
-	addl %r22,%r28,%r20
-	comclr,<<= %r28,%r20,0
-	addi 1,%r19,%r19
-	ldw -4(0,%r23),%r28
-	addl %r20,%r28,%r20
-	comclr,<<= %r28,%r20,0
-	addi,tr 1,%r19,%r28
-	copy %r19,%r28
-	addib,= -1,%r24,L$0003
-	stw %r20,-4(0,%r23)
-	ldw 0(0,%r29),%r19
-	extru %r19,31,16,%r20
-	stw %r20,-16(0,%r30)
-	extru %r19,15,16,%r19
-	fldws -16(0,%r30),%fr22L
-	stw %r19,-16(0,%r30)
-	xmpyu %fr22L,%fr11R,%fr8
-	fldws -16(0,%r30),%fr22L
-	fstws %fr8R,-16(0,%r30)
-	xmpyu %fr11R,%fr22L,%fr10
-	ldw -16(0,%r30),%r2
-	stw %r20,-16(0,%r30)
-	xmpyu %fr22L,%fr11L,%fr9
-	fldws -16(0,%r30),%fr22L
-	fstws %fr10R,-16(0,%r30)
-	copy %r2,%r22
-	ldw -16(0,%r30),%r2
-	fstws %fr9R,-16(0,%r30)
-	xmpyu %fr11L,%fr22L,%fr8
-	copy %r2,%r19
-	ldw -16(0,%r30),%r2
-	fstws %fr8R,-16(0,%r30)
-	copy %r2,%r20
-	ldw -16(0,%r30),%r2
-	addl %r2,%r19,%r21
-	comclr,<<= %r19,%r21,0
-	addl %r20,%r31,%r20
-L$0020
-	extru %r21,15,16,%r19
-	addl %r20,%r19,%r20
-	zdep %r21,15,16,%r19
-	addl %r22,%r19,%r22
-	comclr,<<= %r19,%r22,0
-	addi,tr 1,%r20,%r19
-	copy %r20,%r19
-	addl %r22,%r28,%r20
-	comclr,<<= %r28,%r20,0
-	addi 1,%r19,%r19
-	ldw 0(0,%r23),%r28
-	addl %r20,%r28,%r20
-	comclr,<<= %r28,%r20,0
-	addi,tr 1,%r19,%r28
-	copy %r19,%r28
-	addib,= -1,%r24,L$0003
-	stw %r20,0(0,%r23)
-	ldo 16(%r29),%r29
-	ldo 16(%r25),%r25
-	ldo 16(%r23),%r23
-	bl L$0002,0
-	ldo 16(%r26),%r26
-L$0003
-	ldw -20(0,%r30),%r2
-	bv,n 0(%r2)
-	.EXIT
-	.PROCEND
-	.align 4
-	.EXPORT bn_mul_words,ENTRY,PRIV_LEV=3,ARGW0=GR,ARGW1=GR,ARGW2=GR,ARGW3=GR,RTNVAL=GR
-bn_mul_words
-	.PROC
-	.CALLINFO FRAME=0,CALLS,SAVE_RP
-	.ENTRY
-	stw %r2,-20(0,%r30)
-	ldi 0,%r28
-	extru %r23,31,16,%r2
-	stw %r2,-16(0,%r30)
-	extru %r23,15,16,%r23
-	ldil L'65536,%r31
-	fldws -16(0,%r30),%fr11R
-	stw %r23,-16(0,%r30)
-	ldo 12(%r26),%r29
-	ldo 12(%r25),%r23
-	fldws -16(0,%r30),%fr11L
-L$0026
-	ldw 0(0,%r25),%r19
-	extru %r19,31,16,%r20
-	stw %r20,-16(0,%r30)
-	extru %r19,15,16,%r19
-	fldws -16(0,%r30),%fr22L
-	stw %r19,-16(0,%r30)
-	xmpyu %fr22L,%fr11R,%fr8
-	fldws -16(0,%r30),%fr22L
-	fstws %fr8R,-16(0,%r30)
-	xmpyu %fr11R,%fr22L,%fr10
-	ldw -16(0,%r30),%r2
-	stw %r20,-16(0,%r30)
-	xmpyu %fr22L,%fr11L,%fr9
-	fldws -16(0,%r30),%fr22L
-	fstws %fr10R,-16(0,%r30)
-	copy %r2,%r22
-	ldw -16(0,%r30),%r2
-	fstws %fr9R,-16(0,%r30)
-	xmpyu %fr11L,%fr22L,%fr8
-	copy %r2,%r19
-	ldw -16(0,%r30),%r2
-	fstws %fr8R,-16(0,%r30)
-	copy %r2,%r20
-	ldw -16(0,%r30),%r2
-	addl %r2,%r19,%r21
-	comclr,<<= %r19,%r21,0
-	addl %r20,%r31,%r20
-L$0029
-	extru %r21,15,16,%r19
-	addl %r20,%r19,%r20
-	zdep %r21,15,16,%r19
-	addl %r22,%r19,%r22
-	comclr,<<= %r19,%r22,0
-	addi,tr 1,%r20,%r19
-	copy %r20,%r19
-	addl %r22,%r28,%r20
-	comclr,<<= %r28,%r20,0
-	addi,tr 1,%r19,%r28
-	copy %r19,%r28
-	addib,= -1,%r24,L$0027
-	stw %r20,0(0,%r26)
-	ldw -8(0,%r23),%r19
-	extru %r19,31,16,%r20
-	stw %r20,-16(0,%r30)
-	extru %r19,15,16,%r19
-	fldws -16(0,%r30),%fr22L
-	stw %r19,-16(0,%r30)
-	xmpyu %fr22L,%fr11R,%fr8
-	fldws -16(0,%r30),%fr22L
-	fstws %fr8R,-16(0,%r30)
-	xmpyu %fr11R,%fr22L,%fr10
-	ldw -16(0,%r30),%r2
-	stw %r20,-16(0,%r30)
-	xmpyu %fr22L,%fr11L,%fr9
-	fldws -16(0,%r30),%fr22L
-	fstws %fr10R,-16(0,%r30)
-	copy %r2,%r22
-	ldw -16(0,%r30),%r2
-	fstws %fr9R,-16(0,%r30)
-	xmpyu %fr11L,%fr22L,%fr8
-	copy %r2,%r19
-	ldw -16(0,%r30),%r2
-	fstws %fr8R,-16(0,%r30)
-	copy %r2,%r20
-	ldw -16(0,%r30),%r2
-	addl %r2,%r19,%r21
-	comclr,<<= %r19,%r21,0
-	addl %r20,%r31,%r20
-L$0033
-	extru %r21,15,16,%r19
-	addl %r20,%r19,%r20
-	zdep %r21,15,16,%r19
-	addl %r22,%r19,%r22
-	comclr,<<= %r19,%r22,0
-	addi,tr 1,%r20,%r19
-	copy %r20,%r19
-	addl %r22,%r28,%r20
-	comclr,<<= %r28,%r20,0
-	addi,tr 1,%r19,%r28
-	copy %r19,%r28
-	addib,= -1,%r24,L$0027
-	stw %r20,-8(0,%r29)
-	ldw -4(0,%r23),%r19
-	extru %r19,31,16,%r20
-	stw %r20,-16(0,%r30)
-	extru %r19,15,16,%r19
-	fldws -16(0,%r30),%fr22L
-	stw %r19,-16(0,%r30)
-	xmpyu %fr22L,%fr11R,%fr8
-	fldws -16(0,%r30),%fr22L
-	fstws %fr8R,-16(0,%r30)
-	xmpyu %fr11R,%fr22L,%fr10
-	ldw -16(0,%r30),%r2
-	stw %r20,-16(0,%r30)
-	xmpyu %fr22L,%fr11L,%fr9
-	fldws -16(0,%r30),%fr22L
-	fstws %fr10R,-16(0,%r30)
-	copy %r2,%r22
-	ldw -16(0,%r30),%r2
-	fstws %fr9R,-16(0,%r30)
-	xmpyu %fr11L,%fr22L,%fr8
-	copy %r2,%r19
-	ldw -16(0,%r30),%r2
-	fstws %fr8R,-16(0,%r30)
-	copy %r2,%r20
-	ldw -16(0,%r30),%r2
-	addl %r2,%r19,%r21
-	comclr,<<= %r19,%r21,0
-	addl %r20,%r31,%r20
-L$0037
-	extru %r21,15,16,%r19
-	addl %r20,%r19,%r20
-	zdep %r21,15,16,%r19
-	addl %r22,%r19,%r22
-	comclr,<<= %r19,%r22,0
-	addi,tr 1,%r20,%r19
-	copy %r20,%r19
-	addl %r22,%r28,%r20
-	comclr,<<= %r28,%r20,0
-	addi,tr 1,%r19,%r28
-	copy %r19,%r28
-	addib,= -1,%r24,L$0027
-	stw %r20,-4(0,%r29)
-	ldw 0(0,%r23),%r19
-	extru %r19,31,16,%r20
-	stw %r20,-16(0,%r30)
-	extru %r19,15,16,%r19
-	fldws -16(0,%r30),%fr22L
-	stw %r19,-16(0,%r30)
-	xmpyu %fr22L,%fr11R,%fr8
-	fldws -16(0,%r30),%fr22L
-	fstws %fr8R,-16(0,%r30)
-	xmpyu %fr11R,%fr22L,%fr10
-	ldw -16(0,%r30),%r2
-	stw %r20,-16(0,%r30)
-	xmpyu %fr22L,%fr11L,%fr9
-	fldws -16(0,%r30),%fr22L
-	fstws %fr10R,-16(0,%r30)
-	copy %r2,%r22
-	ldw -16(0,%r30),%r2
-	fstws %fr9R,-16(0,%r30)
-	xmpyu %fr11L,%fr22L,%fr8
-	copy %r2,%r19
-	ldw -16(0,%r30),%r2
-	fstws %fr8R,-16(0,%r30)
-	copy %r2,%r20
-	ldw -16(0,%r30),%r2
-	addl %r2,%r19,%r21
-	comclr,<<= %r19,%r21,0
-	addl %r20,%r31,%r20
-L$0041
-	extru %r21,15,16,%r19
-	addl %r20,%r19,%r20
-	zdep %r21,15,16,%r19
-	addl %r22,%r19,%r22
-	comclr,<<= %r19,%r22,0
-	addi,tr 1,%r20,%r19
-	copy %r20,%r19
-	addl %r22,%r28,%r20
-	comclr,<<= %r28,%r20,0
-	addi,tr 1,%r19,%r28
-	copy %r19,%r28
-	addib,= -1,%r24,L$0027
-	stw %r20,0(0,%r29)
-	ldo 16(%r23),%r23
-	ldo 16(%r25),%r25
-	ldo 16(%r29),%r29
-	bl L$0026,0
-	ldo 16(%r26),%r26
-L$0027
-	ldw -20(0,%r30),%r2
-	bv,n 0(%r2)
-	.EXIT
-	.PROCEND
-	.align 4
-	.EXPORT bn_sqr_words,ENTRY,PRIV_LEV=3,ARGW0=GR,ARGW1=GR,ARGW2=GR
-bn_sqr_words
-	.PROC
-	.CALLINFO FRAME=0,NO_CALLS
-	.ENTRY
-	ldo 28(%r26),%r23
-	ldo 12(%r25),%r28
-L$0046
-	ldw 0(0,%r25),%r21
-	extru %r21,31,16,%r22
-	stw %r22,-16(0,%r30)
-	extru %r21,15,16,%r21
-	fldws -16(0,%r30),%fr10L
-	stw %r21,-16(0,%r30)
-	fldws -16(0,%r30),%fr10R
-	xmpyu %fr10L,%fr10R,%fr8
-	fstws %fr8R,-16(0,%r30)
-	ldw -16(0,%r30),%r29
-	stw %r22,-16(0,%r30)
-	fldws -16(0,%r30),%fr10R
-	stw %r21,-16(0,%r30)
-	copy %r29,%r19
-	xmpyu %fr10L,%fr10R,%fr8
-	fldws -16(0,%r30),%fr10L
-	stw %r21,-16(0,%r30)
-	fldws -16(0,%r30),%fr10R
-	fstws %fr8R,-16(0,%r30)
-	extru %r19,16,17,%r20
-	zdep %r19,14,15,%r19
-	ldw -16(0,%r30),%r29
-	xmpyu %fr10L,%fr10R,%fr9
-	addl %r29,%r19,%r22
-	stw %r22,0(0,%r26)
-	fstws %fr9R,-16(0,%r30)
-	ldw -16(0,%r30),%r29
-	addl %r29,%r20,%r21
-	comclr,<<= %r19,%r22,0
-	addi 1,%r21,%r21
-	addib,= -1,%r24,L$0057
-	stw %r21,-24(0,%r23)
-	ldw -8(0,%r28),%r21
-	extru %r21,31,16,%r22
-	stw %r22,-16(0,%r30)
-	extru %r21,15,16,%r21
-	fldws -16(0,%r30),%fr10L
-	stw %r21,-16(0,%r30)
-	fldws -16(0,%r30),%fr10R
-	xmpyu %fr10L,%fr10R,%fr8
-	fstws %fr8R,-16(0,%r30)
-	ldw -16(0,%r30),%r29
-	stw %r22,-16(0,%r30)
-	fldws -16(0,%r30),%fr10R
-	stw %r21,-16(0,%r30)
-	copy %r29,%r19
-	xmpyu %fr10L,%fr10R,%fr8
-	fldws -16(0,%r30),%fr10L
-	stw %r21,-16(0,%r30)
-	fldws -16(0,%r30),%fr10R
-	fstws %fr8R,-16(0,%r30)
-	extru %r19,16,17,%r20
-	zdep %r19,14,15,%r19
-	ldw -16(0,%r30),%r29
-	xmpyu %fr10L,%fr10R,%fr9
-	addl %r29,%r19,%r22
-	stw %r22,-20(0,%r23)
-	fstws %fr9R,-16(0,%r30)
-	ldw -16(0,%r30),%r29
-	addl %r29,%r20,%r21
-	comclr,<<= %r19,%r22,0
-	addi 1,%r21,%r21
-	addib,= -1,%r24,L$0057
-	stw %r21,-16(0,%r23)
-	ldw -4(0,%r28),%r21
-	extru %r21,31,16,%r22
-	stw %r22,-16(0,%r30)
-	extru %r21,15,16,%r21
-	fldws -16(0,%r30),%fr10L
-	stw %r21,-16(0,%r30)
-	fldws -16(0,%r30),%fr10R
-	xmpyu %fr10L,%fr10R,%fr8
-	fstws %fr8R,-16(0,%r30)
-	ldw -16(0,%r30),%r29
-	stw %r22,-16(0,%r30)
-	fldws -16(0,%r30),%fr10R
-	stw %r21,-16(0,%r30)
-	copy %r29,%r19
-	xmpyu %fr10L,%fr10R,%fr8
-	fldws -16(0,%r30),%fr10L
-	stw %r21,-16(0,%r30)
-	fldws -16(0,%r30),%fr10R
-	fstws %fr8R,-16(0,%r30)
-	extru %r19,16,17,%r20
-	zdep %r19,14,15,%r19
-	ldw -16(0,%r30),%r29
-	xmpyu %fr10L,%fr10R,%fr9
-	addl %r29,%r19,%r22
-	stw %r22,-12(0,%r23)
-	fstws %fr9R,-16(0,%r30)
-	ldw -16(0,%r30),%r29
-	addl %r29,%r20,%r21
-	comclr,<<= %r19,%r22,0
-	addi 1,%r21,%r21
-	addib,= -1,%r24,L$0057
-	stw %r21,-8(0,%r23)
-	ldw 0(0,%r28),%r21
-	extru %r21,31,16,%r22
-	stw %r22,-16(0,%r30)
-	extru %r21,15,16,%r21
-	fldws -16(0,%r30),%fr10L
-	stw %r21,-16(0,%r30)
-	fldws -16(0,%r30),%fr10R
-	xmpyu %fr10L,%fr10R,%fr8
-	fstws %fr8R,-16(0,%r30)
-	ldw -16(0,%r30),%r29
-	stw %r22,-16(0,%r30)
-	fldws -16(0,%r30),%fr10R
-	stw %r21,-16(0,%r30)
-	copy %r29,%r19
-	xmpyu %fr10L,%fr10R,%fr8
-	fldws -16(0,%r30),%fr10L
-	stw %r21,-16(0,%r30)
-	fldws -16(0,%r30),%fr10R
-	fstws %fr8R,-16(0,%r30)
-	extru %r19,16,17,%r20
-	zdep %r19,14,15,%r19
-	ldw -16(0,%r30),%r29
-	xmpyu %fr10L,%fr10R,%fr9
-	addl %r29,%r19,%r22
-	stw %r22,-4(0,%r23)
-	fstws %fr9R,-16(0,%r30)
-	ldw -16(0,%r30),%r29
-	addl %r29,%r20,%r21
-	comclr,<<= %r19,%r22,0
-	addi 1,%r21,%r21
-	addib,= -1,%r24,L$0057
-	stw %r21,0(0,%r23)
-	ldo 16(%r28),%r28
-	ldo 16(%r25),%r25
-	ldo 32(%r23),%r23
-	bl L$0046,0
-	ldo 32(%r26),%r26
-L$0057
-	bv,n 0(%r2)
-	.EXIT
-	.PROCEND
-	.IMPORT BN_num_bits_word,CODE
-	.IMPORT fprintf,CODE
-	.IMPORT __iob,DATA
-	.SPACE $TEXT$
-	.SUBSPA $LIT$
-
-	.align 4
-L$C0000
-	.STRING "Division would overflow\x0a\x00"
-	.IMPORT abort,CODE
-	.SPACE $TEXT$
-	.SUBSPA $CODE$
-
-	.align 4
-	.EXPORT bn_div64,ENTRY,PRIV_LEV=3,ARGW0=GR,ARGW1=GR,ARGW2=GR,RTNVAL=GR
-bn_div64
-	.PROC
-	.CALLINFO FRAME=128,CALLS,SAVE_RP,ENTRY_GR=8
-	.ENTRY
-	stw %r2,-20(0,%r30)
-	stwm %r8,128(0,%r30)
-	stw %r7,-124(0,%r30)
-	stw %r4,-112(0,%r30)
-	stw %r3,-108(0,%r30)
-	copy %r26,%r3
-	copy %r25,%r4
-	stw %r6,-120(0,%r30)
-	ldi 0,%r7
-	stw %r5,-116(0,%r30)
-	movb,<> %r24,%r5,L$0059
-	ldi 2,%r6
-	bl L$0076,0
-	ldi -1,%r28
-L$0059
-	.CALL ARGW0=GR
-	bl BN_num_bits_word,%r2
-	copy %r5,%r26
-	ldi 32,%r19
-	comb,= %r19,%r28,L$0060
-	subi 31,%r28,%r19
-	mtsar %r19
-	zvdepi 1,32,%r19
-	comb,>>= %r19,%r3,L$0060
-	addil LR'__iob-$global$+32,%r27
-	ldo RR'__iob-$global$+32(%r1),%r26
-	ldil LR'L$C0000,%r25
-	.CALL ARGW0=GR,ARGW1=GR
-	bl fprintf,%r2
-	ldo RR'L$C0000(%r25),%r25
-	.CALL 
-	bl abort,%r2
-	nop
-L$0060
-	comb,>> %r5,%r3,L$0061
-	subi 32,%r28,%r28
-	sub %r3,%r5,%r3
-L$0061
-	comib,= 0,%r28,L$0062
-	subi 31,%r28,%r19
-	mtsar %r19
-	zvdep %r5,32,%r5
-	zvdep %r3,32,%r21
-	subi 32,%r28,%r20
-	mtsar %r20
-	vshd 0,%r4,%r20
-	or %r21,%r20,%r3
-	mtsar %r19
-	zvdep %r4,32,%r4
-L$0062
-	extru %r5,15,16,%r23
-	extru %r5,31,16,%r28
-L$0063
-	extru %r3,15,16,%r19
-	comb,<> %r23,%r19,L$0066
-	copy %r3,%r26
-	bl L$0067,0
-	zdepi -1,31,16,%r29
-L$0066
-	.IMPORT $$divU,MILLICODE
-	bl $$divU,%r31
-	copy %r23,%r25
-L$0067
-	stw %r29,-16(0,%r30)
-	fldws -16(0,%r30),%fr10L
-	stw %r28,-16(0,%r30)
-	fldws -16(0,%r30),%fr10R
-	stw %r23,-16(0,%r30)
-	xmpyu %fr10L,%fr10R,%fr8
-	fldws -16(0,%r30),%fr10R
-	fstws %fr8R,-16(0,%r30)
-	xmpyu %fr10L,%fr10R,%fr9
-	ldw -16(0,%r30),%r8
-	fstws %fr9R,-16(0,%r30)
-	copy %r8,%r22
-	ldw -16(0,%r30),%r8
-	extru %r4,15,16,%r24
-	copy %r8,%r21
-L$0068
-	sub %r3,%r21,%r20
-	copy %r20,%r19
-	depi 0,31,16,%r19
-	comib,<> 0,%r19,L$0069
-	zdep %r20,15,16,%r19
-	addl %r19,%r24,%r19
-	comb,>>= %r19,%r22,L$0069
-	sub %r22,%r28,%r22
-	sub %r21,%r23,%r21
-	bl L$0068,0
-	ldo -1(%r29),%r29
-L$0069
-	stw %r29,-16(0,%r30)
-	fldws -16(0,%r30),%fr10L
-	stw %r28,-16(0,%r30)
-	fldws -16(0,%r30),%fr10R
-	xmpyu %fr10L,%fr10R,%fr8
-	fstws %fr8R,-16(0,%r30)
-	ldw -16(0,%r30),%r8
-	stw %r23,-16(0,%r30)
-	fldws -16(0,%r30),%fr10R
-	copy %r8,%r19
-	xmpyu %fr10L,%fr10R,%fr8
-	fstws %fr8R,-16(0,%r30)
-	extru %r19,15,16,%r20
-	ldw -16(0,%r30),%r8
-	zdep %r19,15,16,%r19
-	addl %r8,%r20,%r20
-	comclr,<<= %r19,%r4,0
-	addi 1,%r20,%r20
-	comb,<<= %r20,%r3,L$0074
-	sub %r4,%r19,%r4
-	addl %r3,%r5,%r3
-	ldo -1(%r29),%r29
-L$0074
-	addib,= -1,%r6,L$0064
-	sub %r3,%r20,%r3
-	zdep %r29,15,16,%r7
-	shd %r3,%r4,16,%r3
-	bl L$0063,0
-	zdep %r4,15,16,%r4
-L$0064
-	or %r7,%r29,%r28
-L$0076
-	ldw -148(0,%r30),%r2
-	ldw -124(0,%r30),%r7
-	ldw -120(0,%r30),%r6
-	ldw -116(0,%r30),%r5
-	ldw -112(0,%r30),%r4
-	ldw -108(0,%r30),%r3
-	bv 0(%r2)
-	ldwm -128(0,%r30),%r8
-	.EXIT
-	.PROCEND
diff --git a/crypto/openssl/crypto/bn/asm/pa-risc2.s b/crypto/openssl/crypto/bn/asm/pa-risc2.s
deleted file mode 100644
index f3b16290eb04..000000000000
--- a/crypto/openssl/crypto/bn/asm/pa-risc2.s
+++ /dev/null
@@ -1,1618 +0,0 @@
-;
-; PA-RISC 2.0 implementation of bn_asm code, based on the
-; 64-bit version of the code.  This code is effectively the
-; same as the 64-bit version except the register model is
-; slightly different given all values must be 32-bit between
-; function calls.  Thus the 64-bit return values are returned
-; in %ret0 and %ret1 vs just %ret0 as is done in 64-bit
-;
-;
-; This code is approximately 2x faster than the C version
-; for RSA/DSA.
-;
-; See http://devresource.hp.com/  for more details on the PA-RISC
-; architecture.  Also see the book "PA-RISC 2.0 Architecture"
-; by Gerry Kane for information on the instruction set architecture.
-;
-; Code written by Chris Ruemmler (with some help from the HP C
-; compiler).
-;
-; The code compiles with HP's assembler
-;
-
-	.level	2.0N
-	.space	$TEXT$
-	.subspa	$CODE$,QUAD=0,ALIGN=8,ACCESS=0x2c,CODE_ONLY
-
-;
-; Global Register definitions used for the routines.
-;
-; Some information about HP's runtime architecture for 32-bits.
-;
-; "Caller save" means the calling function must save the register
-; if it wants the register to be preserved.
-; "Callee save" means if a function uses the register, it must save
-; the value before using it.
-;
-; For the floating point registers 
-;
-;    "caller save" registers: fr4-fr11, fr22-fr31
-;    "callee save" registers: fr12-fr21
-;    "special" registers: fr0-fr3 (status and exception registers)
-;
-; For the integer registers
-;     value zero             :  r0
-;     "caller save" registers: r1,r19-r26
-;     "callee save" registers: r3-r18
-;     return register        :  r2  (rp)
-;     return values          ; r28,r29  (ret0,ret1)
-;     Stack pointer          ; r30  (sp) 
-;     millicode return ptr   ; r31  (also a caller save register)
-
-
-;
-; Arguments to the routines
-;
-r_ptr       .reg %r26
-a_ptr       .reg %r25
-b_ptr       .reg %r24
-num         .reg %r24
-n           .reg %r23
-
-;
-; Note that the "w" argument for bn_mul_add_words and bn_mul_words
-; is passed on the stack at a delta of -56 from the top of stack
-; as the routine is entered.
-;
-
-;
-; Globals used in some routines
-;
-
-top_overflow .reg %r23
-high_mask    .reg %r22    ; value 0xffffffff80000000L
-
-
-;------------------------------------------------------------------------------
-;
-; bn_mul_add_words
-;
-;BN_ULONG bn_mul_add_words(BN_ULONG *r_ptr, BN_ULONG *a_ptr, 
-;								int num, BN_ULONG w)
-;
-; arg0 = r_ptr
-; arg1 = a_ptr
-; arg3 = num
-; -56(sp) =  w
-;
-; Local register definitions
-;
-
-fm1          .reg %fr22
-fm           .reg %fr23
-ht_temp      .reg %fr24
-ht_temp_1    .reg %fr25
-lt_temp      .reg %fr26
-lt_temp_1    .reg %fr27
-fm1_1        .reg %fr28
-fm_1         .reg %fr29
-
-fw_h         .reg %fr7L
-fw_l         .reg %fr7R
-fw           .reg %fr7
-
-fht_0        .reg %fr8L
-flt_0        .reg %fr8R
-t_float_0    .reg %fr8
-
-fht_1        .reg %fr9L
-flt_1        .reg %fr9R
-t_float_1    .reg %fr9
-
-tmp_0        .reg %r31
-tmp_1        .reg %r21
-m_0          .reg %r20 
-m_1          .reg %r19 
-ht_0         .reg %r1  
-ht_1         .reg %r3
-lt_0         .reg %r4
-lt_1         .reg %r5
-m1_0         .reg %r6 
-m1_1         .reg %r7 
-rp_val       .reg %r8
-rp_val_1     .reg %r9
-
-bn_mul_add_words
-	.export	bn_mul_add_words,entry,NO_RELOCATION,LONG_RETURN
-	.proc
-	.callinfo frame=128
-    .entry
-	.align 64
-
-    STD     %r3,0(%sp)          ; save r3  
-    STD     %r4,8(%sp)          ; save r4  
-	NOP                         ; Needed to make the loop 16-byte aligned
-	NOP                         ; needed to make the loop 16-byte aligned
-
-    STD     %r5,16(%sp)         ; save r5  
-	NOP
-    STD     %r6,24(%sp)         ; save r6  
-    STD     %r7,32(%sp)         ; save r7  
-
-    STD     %r8,40(%sp)         ; save r8  
-    STD     %r9,48(%sp)         ; save r9  
-    COPY    %r0,%ret1           ; return 0 by default
-    DEPDI,Z 1,31,1,top_overflow ; top_overflow = 1 << 32    
-
-    CMPIB,>= 0,num,bn_mul_add_words_exit  ; if (num <= 0) then exit
-	LDO     128(%sp),%sp        ; bump stack
-
-	;
-	; The loop is unrolled twice, so if there is only 1 number
-    ; then go straight to the cleanup code.
-	;
-	CMPIB,= 1,num,bn_mul_add_words_single_top
-	FLDD    -184(%sp),fw        ; (-56-128) load up w into fw (fw_h/fw_l)
-
-	;
-	; This loop is unrolled 2 times (64-byte aligned as well)
-	;
-	; PA-RISC 2.0 chips have two fully pipelined multipliers, thus
-    ; two 32-bit mutiplies can be issued per cycle.
-    ; 
-bn_mul_add_words_unroll2
-
-    FLDD    0(a_ptr),t_float_0       ; load up 64-bit value (fr8L) ht(L)/lt(R)
-    FLDD    8(a_ptr),t_float_1       ; load up 64-bit value (fr8L) ht(L)/lt(R)
-    LDD     0(r_ptr),rp_val          ; rp[0]
-    LDD     8(r_ptr),rp_val_1        ; rp[1]
-
-    XMPYU   fht_0,fw_l,fm1           ; m1[0] = fht_0*fw_l
-    XMPYU   fht_1,fw_l,fm1_1         ; m1[1] = fht_1*fw_l
-    FSTD    fm1,-16(%sp)             ; -16(sp) = m1[0]
-    FSTD    fm1_1,-48(%sp)           ; -48(sp) = m1[1]
-
-    XMPYU   flt_0,fw_h,fm            ; m[0] = flt_0*fw_h
-    XMPYU   flt_1,fw_h,fm_1          ; m[1] = flt_1*fw_h
-    FSTD    fm,-8(%sp)               ; -8(sp) = m[0]
-    FSTD    fm_1,-40(%sp)            ; -40(sp) = m[1]
-
-    XMPYU   fht_0,fw_h,ht_temp       ; ht_temp   = fht_0*fw_h
-    XMPYU   fht_1,fw_h,ht_temp_1     ; ht_temp_1 = fht_1*fw_h
-    FSTD    ht_temp,-24(%sp)         ; -24(sp)   = ht_temp
-    FSTD    ht_temp_1,-56(%sp)       ; -56(sp)   = ht_temp_1
-
-    XMPYU   flt_0,fw_l,lt_temp       ; lt_temp = lt*fw_l
-    XMPYU   flt_1,fw_l,lt_temp_1     ; lt_temp = lt*fw_l
-    FSTD    lt_temp,-32(%sp)         ; -32(sp) = lt_temp 
-    FSTD    lt_temp_1,-64(%sp)       ; -64(sp) = lt_temp_1 
-
-    LDD     -8(%sp),m_0              ; m[0] 
-    LDD     -40(%sp),m_1             ; m[1]
-    LDD     -16(%sp),m1_0            ; m1[0]
-    LDD     -48(%sp),m1_1            ; m1[1]
-
-    LDD     -24(%sp),ht_0            ; ht[0]
-    LDD     -56(%sp),ht_1            ; ht[1]
-    ADD,L   m1_0,m_0,tmp_0           ; tmp_0 = m[0] + m1[0]; 
-    ADD,L   m1_1,m_1,tmp_1           ; tmp_1 = m[1] + m1[1]; 
-
-    LDD     -32(%sp),lt_0            
-    LDD     -64(%sp),lt_1            
-    CMPCLR,*>>= tmp_0,m1_0, %r0      ; if (m[0] < m1[0])
-    ADD,L   ht_0,top_overflow,ht_0   ; ht[0] += (1<<32)
-
-    CMPCLR,*>>= tmp_1,m1_1,%r0       ; if (m[1] < m1[1])
-    ADD,L   ht_1,top_overflow,ht_1   ; ht[1] += (1<<32)
-    EXTRD,U tmp_0,31,32,m_0          ; m[0]>>32  
-    DEPD,Z  tmp_0,31,32,m1_0         ; m1[0] = m[0]<<32 
-
-    EXTRD,U tmp_1,31,32,m_1          ; m[1]>>32  
-    DEPD,Z  tmp_1,31,32,m1_1         ; m1[1] = m[1]<<32 
-    ADD,L   ht_0,m_0,ht_0            ; ht[0]+= (m[0]>>32)
-    ADD,L   ht_1,m_1,ht_1            ; ht[1]+= (m[1]>>32)
-
-    ADD     lt_0,m1_0,lt_0           ; lt[0] = lt[0]+m1[0];
-	ADD,DC  ht_0,%r0,ht_0            ; ht[0]++
-    ADD     lt_1,m1_1,lt_1           ; lt[1] = lt[1]+m1[1];
-    ADD,DC  ht_1,%r0,ht_1            ; ht[1]++
-
-    ADD    %ret1,lt_0,lt_0           ; lt[0] = lt[0] + c;
-	ADD,DC  ht_0,%r0,ht_0            ; ht[0]++
-    ADD     lt_0,rp_val,lt_0         ; lt[0] = lt[0]+rp[0]
-    ADD,DC  ht_0,%r0,ht_0            ; ht[0]++
-
-	LDO    -2(num),num               ; num = num - 2;
-    ADD     ht_0,lt_1,lt_1           ; lt[1] = lt[1] + ht_0 (c);
-    ADD,DC  ht_1,%r0,ht_1            ; ht[1]++
-    STD     lt_0,0(r_ptr)            ; rp[0] = lt[0]
-
-    ADD     lt_1,rp_val_1,lt_1       ; lt[1] = lt[1]+rp[1]
-    ADD,DC  ht_1,%r0,%ret1           ; ht[1]++
-    LDO     16(a_ptr),a_ptr          ; a_ptr += 2
-
-    STD     lt_1,8(r_ptr)            ; rp[1] = lt[1]
-	CMPIB,<= 2,num,bn_mul_add_words_unroll2 ; go again if more to do
-    LDO     16(r_ptr),r_ptr          ; r_ptr += 2
-
-    CMPIB,=,N 0,num,bn_mul_add_words_exit ; are we done, or cleanup last one
-
-	;
-	; Top of loop aligned on 64-byte boundary
-	;
-bn_mul_add_words_single_top
-    FLDD    0(a_ptr),t_float_0        ; load up 64-bit value (fr8L) ht(L)/lt(R)
-    LDD     0(r_ptr),rp_val           ; rp[0]
-    LDO     8(a_ptr),a_ptr            ; a_ptr++
-    XMPYU   fht_0,fw_l,fm1            ; m1 = ht*fw_l
-    FSTD    fm1,-16(%sp)              ; -16(sp) = m1
-    XMPYU   flt_0,fw_h,fm             ; m = lt*fw_h
-    FSTD    fm,-8(%sp)                ; -8(sp) = m
-    XMPYU   fht_0,fw_h,ht_temp        ; ht_temp = ht*fw_h
-    FSTD    ht_temp,-24(%sp)          ; -24(sp) = ht
-    XMPYU   flt_0,fw_l,lt_temp        ; lt_temp = lt*fw_l
-    FSTD    lt_temp,-32(%sp)          ; -32(sp) = lt 
-
-    LDD     -8(%sp),m_0               
-    LDD    -16(%sp),m1_0              ; m1 = temp1 
-    ADD,L   m_0,m1_0,tmp_0            ; tmp_0 = m + m1; 
-    LDD     -24(%sp),ht_0             
-    LDD     -32(%sp),lt_0             
-
-    CMPCLR,*>>= tmp_0,m1_0,%r0        ; if (m < m1)
-    ADD,L   ht_0,top_overflow,ht_0    ; ht += (1<<32)
-
-    EXTRD,U tmp_0,31,32,m_0           ; m>>32  
-    DEPD,Z  tmp_0,31,32,m1_0          ; m1 = m<<32 
-
-    ADD,L   ht_0,m_0,ht_0             ; ht+= (m>>32)
-    ADD     lt_0,m1_0,tmp_0           ; tmp_0 = lt+m1;
-    ADD,DC  ht_0,%r0,ht_0             ; ht++
-    ADD     %ret1,tmp_0,lt_0          ; lt = lt + c;
-    ADD,DC  ht_0,%r0,ht_0             ; ht++
-    ADD     lt_0,rp_val,lt_0          ; lt = lt+rp[0]
-    ADD,DC  ht_0,%r0,%ret1            ; ht++
-    STD     lt_0,0(r_ptr)             ; rp[0] = lt
-
-bn_mul_add_words_exit
-    .EXIT
-	
-    EXTRD,U %ret1,31,32,%ret0         ; for 32-bit, return in ret0/ret1
-    LDD     -80(%sp),%r9              ; restore r9  
-    LDD     -88(%sp),%r8              ; restore r8  
-    LDD     -96(%sp),%r7              ; restore r7  
-    LDD     -104(%sp),%r6             ; restore r6  
-    LDD     -112(%sp),%r5             ; restore r5  
-    LDD     -120(%sp),%r4             ; restore r4  
-    BVE     (%rp)
-    LDD,MB  -128(%sp),%r3             ; restore r3
-	.PROCEND	;in=23,24,25,26,29;out=28;
-
-;----------------------------------------------------------------------------
-;
-;BN_ULONG bn_mul_words(BN_ULONG *rp, BN_ULONG *ap, int num, BN_ULONG w)
-;
-; arg0 = rp
-; arg1 = ap
-; arg3 = num
-; w on stack at -56(sp)
-
-bn_mul_words
-	.proc
-	.callinfo frame=128
-    .entry
-	.EXPORT	bn_mul_words,ENTRY,PRIV_LEV=3,NO_RELOCATION,LONG_RETURN
-	.align 64
-
-    STD     %r3,0(%sp)          ; save r3  
-    STD     %r4,8(%sp)          ; save r4  
-	NOP
-    STD     %r5,16(%sp)         ; save r5  
-
-    STD     %r6,24(%sp)         ; save r6  
-    STD     %r7,32(%sp)         ; save r7  
-    COPY    %r0,%ret1           ; return 0 by default
-    DEPDI,Z 1,31,1,top_overflow ; top_overflow = 1 << 32    
-
-    CMPIB,>= 0,num,bn_mul_words_exit
-	LDO     128(%sp),%sp    ; bump stack
-
-	;
-	; See if only 1 word to do, thus just do cleanup
-	;
-	CMPIB,= 1,num,bn_mul_words_single_top
-	FLDD    -184(%sp),fw        ; (-56-128) load up w into fw (fw_h/fw_l)
-
-	;
-	; This loop is unrolled 2 times (64-byte aligned as well)
-	;
-	; PA-RISC 2.0 chips have two fully pipelined multipliers, thus
-    ; two 32-bit mutiplies can be issued per cycle.
-    ; 
-bn_mul_words_unroll2
-
-    FLDD    0(a_ptr),t_float_0        ; load up 64-bit value (fr8L) ht(L)/lt(R)
-    FLDD    8(a_ptr),t_float_1        ; load up 64-bit value (fr8L) ht(L)/lt(R)
-    XMPYU   fht_0,fw_l,fm1            ; m1[0] = fht_0*fw_l
-    XMPYU   fht_1,fw_l,fm1_1          ; m1[1] = ht*fw_l
-
-    FSTD    fm1,-16(%sp)              ; -16(sp) = m1
-    FSTD    fm1_1,-48(%sp)            ; -48(sp) = m1
-    XMPYU   flt_0,fw_h,fm             ; m = lt*fw_h
-    XMPYU   flt_1,fw_h,fm_1           ; m = lt*fw_h
-
-    FSTD    fm,-8(%sp)                ; -8(sp) = m
-    FSTD    fm_1,-40(%sp)             ; -40(sp) = m
-    XMPYU   fht_0,fw_h,ht_temp        ; ht_temp = fht_0*fw_h
-    XMPYU   fht_1,fw_h,ht_temp_1      ; ht_temp = ht*fw_h
-
-    FSTD    ht_temp,-24(%sp)          ; -24(sp) = ht
-    FSTD    ht_temp_1,-56(%sp)        ; -56(sp) = ht
-    XMPYU   flt_0,fw_l,lt_temp        ; lt_temp = lt*fw_l
-    XMPYU   flt_1,fw_l,lt_temp_1      ; lt_temp = lt*fw_l
-
-    FSTD    lt_temp,-32(%sp)          ; -32(sp) = lt 
-    FSTD    lt_temp_1,-64(%sp)        ; -64(sp) = lt 
-    LDD     -8(%sp),m_0               
-    LDD     -40(%sp),m_1              
-
-    LDD    -16(%sp),m1_0              
-    LDD    -48(%sp),m1_1              
-    LDD     -24(%sp),ht_0             
-    LDD     -56(%sp),ht_1             
-
-    ADD,L   m1_0,m_0,tmp_0            ; tmp_0 = m + m1; 
-    ADD,L   m1_1,m_1,tmp_1            ; tmp_1 = m + m1; 
-    LDD     -32(%sp),lt_0             
-    LDD     -64(%sp),lt_1             
-
-    CMPCLR,*>>= tmp_0,m1_0, %r0       ; if (m < m1)
-    ADD,L   ht_0,top_overflow,ht_0    ; ht += (1<<32)
-    CMPCLR,*>>= tmp_1,m1_1,%r0        ; if (m < m1)
-    ADD,L   ht_1,top_overflow,ht_1    ; ht += (1<<32)
-
-    EXTRD,U tmp_0,31,32,m_0           ; m>>32  
-    DEPD,Z  tmp_0,31,32,m1_0          ; m1 = m<<32 
-    EXTRD,U tmp_1,31,32,m_1           ; m>>32  
-    DEPD,Z  tmp_1,31,32,m1_1          ; m1 = m<<32 
-
-    ADD,L   ht_0,m_0,ht_0             ; ht+= (m>>32)
-    ADD,L   ht_1,m_1,ht_1             ; ht+= (m>>32)
-    ADD     lt_0,m1_0,lt_0            ; lt = lt+m1;
-	ADD,DC  ht_0,%r0,ht_0             ; ht++
-
-    ADD     lt_1,m1_1,lt_1            ; lt = lt+m1;
-    ADD,DC  ht_1,%r0,ht_1             ; ht++
-    ADD    %ret1,lt_0,lt_0            ; lt = lt + c (ret1);
-	ADD,DC  ht_0,%r0,ht_0             ; ht++
-
-    ADD     ht_0,lt_1,lt_1            ; lt = lt + c (ht_0)
-    ADD,DC  ht_1,%r0,ht_1             ; ht++
-    STD     lt_0,0(r_ptr)             ; rp[0] = lt
-    STD     lt_1,8(r_ptr)             ; rp[1] = lt
-
-	COPY    ht_1,%ret1                ; carry = ht
-	LDO    -2(num),num                ; num = num - 2;
-    LDO     16(a_ptr),a_ptr           ; ap += 2
-	CMPIB,<= 2,num,bn_mul_words_unroll2
-    LDO     16(r_ptr),r_ptr           ; rp++
-
-    CMPIB,=,N 0,num,bn_mul_words_exit ; are we done?
-
-	;
-	; Top of loop aligned on 64-byte boundary
-	;
-bn_mul_words_single_top
-    FLDD    0(a_ptr),t_float_0        ; load up 64-bit value (fr8L) ht(L)/lt(R)
-
-    XMPYU   fht_0,fw_l,fm1            ; m1 = ht*fw_l
-    FSTD    fm1,-16(%sp)              ; -16(sp) = m1
-    XMPYU   flt_0,fw_h,fm             ; m = lt*fw_h
-    FSTD    fm,-8(%sp)                ; -8(sp) = m
-    XMPYU   fht_0,fw_h,ht_temp        ; ht_temp = ht*fw_h
-    FSTD    ht_temp,-24(%sp)          ; -24(sp) = ht
-    XMPYU   flt_0,fw_l,lt_temp        ; lt_temp = lt*fw_l
-    FSTD    lt_temp,-32(%sp)          ; -32(sp) = lt 
-
-    LDD     -8(%sp),m_0               
-    LDD    -16(%sp),m1_0              
-    ADD,L   m_0,m1_0,tmp_0            ; tmp_0 = m + m1; 
-    LDD     -24(%sp),ht_0             
-    LDD     -32(%sp),lt_0             
-
-    CMPCLR,*>>= tmp_0,m1_0,%r0        ; if (m < m1)
-    ADD,L   ht_0,top_overflow,ht_0    ; ht += (1<<32)
-
-    EXTRD,U tmp_0,31,32,m_0           ; m>>32  
-    DEPD,Z  tmp_0,31,32,m1_0          ; m1 = m<<32 
-
-    ADD,L   ht_0,m_0,ht_0             ; ht+= (m>>32)
-    ADD     lt_0,m1_0,lt_0            ; lt= lt+m1;
-    ADD,DC  ht_0,%r0,ht_0             ; ht++
-
-    ADD     %ret1,lt_0,lt_0           ; lt = lt + c;
-    ADD,DC  ht_0,%r0,ht_0             ; ht++
-
-    COPY    ht_0,%ret1                ; copy carry
-    STD     lt_0,0(r_ptr)             ; rp[0] = lt
-
-bn_mul_words_exit
-    .EXIT
-    EXTRD,U %ret1,31,32,%ret0           ; for 32-bit, return in ret0/ret1
-    LDD     -96(%sp),%r7              ; restore r7  
-    LDD     -104(%sp),%r6             ; restore r6  
-    LDD     -112(%sp),%r5             ; restore r5  
-    LDD     -120(%sp),%r4             ; restore r4  
-    BVE     (%rp)
-    LDD,MB  -128(%sp),%r3             ; restore r3
-	.PROCEND	
-
-;----------------------------------------------------------------------------
-;
-;void bn_sqr_words(BN_ULONG *rp, BN_ULONG *ap, int num)
-;
-; arg0 = rp
-; arg1 = ap
-; arg2 = num
-;
-
-bn_sqr_words
-	.proc
-	.callinfo FRAME=128,ENTRY_GR=%r3,ARGS_SAVED,ORDERING_AWARE
-	.EXPORT	bn_sqr_words,ENTRY,PRIV_LEV=3,NO_RELOCATION,LONG_RETURN
-    .entry
-	.align 64
-
-    STD     %r3,0(%sp)          ; save r3  
-    STD     %r4,8(%sp)          ; save r4  
-	NOP
-    STD     %r5,16(%sp)         ; save r5  
-
-    CMPIB,>= 0,num,bn_sqr_words_exit
-	LDO     128(%sp),%sp       ; bump stack
-
-	;
-	; If only 1, the goto straight to cleanup
-	;
-	CMPIB,= 1,num,bn_sqr_words_single_top
-    DEPDI,Z -1,32,33,high_mask   ; Create Mask 0xffffffff80000000L
-
-	;
-	; This loop is unrolled 2 times (64-byte aligned as well)
-	;
-
-bn_sqr_words_unroll2
-    FLDD    0(a_ptr),t_float_0        ; a[0]
-    FLDD    8(a_ptr),t_float_1        ; a[1]
-    XMPYU   fht_0,flt_0,fm            ; m[0]
-    XMPYU   fht_1,flt_1,fm_1          ; m[1]
-
-    FSTD    fm,-24(%sp)               ; store m[0]
-    FSTD    fm_1,-56(%sp)             ; store m[1]
-    XMPYU   flt_0,flt_0,lt_temp       ; lt[0]
-    XMPYU   flt_1,flt_1,lt_temp_1     ; lt[1]
-
-    FSTD    lt_temp,-16(%sp)          ; store lt[0]
-    FSTD    lt_temp_1,-48(%sp)        ; store lt[1]
-    XMPYU   fht_0,fht_0,ht_temp       ; ht[0]
-    XMPYU   fht_1,fht_1,ht_temp_1     ; ht[1]
-
-    FSTD    ht_temp,-8(%sp)           ; store ht[0]
-    FSTD    ht_temp_1,-40(%sp)        ; store ht[1]
-    LDD     -24(%sp),m_0             
-    LDD     -56(%sp),m_1              
-
-    AND     m_0,high_mask,tmp_0       ; m[0] & Mask
-    AND     m_1,high_mask,tmp_1       ; m[1] & Mask
-    DEPD,Z  m_0,30,31,m_0             ; m[0] << 32+1
-    DEPD,Z  m_1,30,31,m_1             ; m[1] << 32+1
-
-    LDD     -16(%sp),lt_0        
-    LDD     -48(%sp),lt_1        
-    EXTRD,U tmp_0,32,33,tmp_0         ; tmp_0 = m[0]&Mask >> 32-1
-    EXTRD,U tmp_1,32,33,tmp_1         ; tmp_1 = m[1]&Mask >> 32-1
-
-    LDD     -8(%sp),ht_0            
-    LDD     -40(%sp),ht_1           
-    ADD,L   ht_0,tmp_0,ht_0           ; ht[0] += tmp_0
-    ADD,L   ht_1,tmp_1,ht_1           ; ht[1] += tmp_1
-
-    ADD     lt_0,m_0,lt_0             ; lt = lt+m
-    ADD,DC  ht_0,%r0,ht_0             ; ht[0]++
-    STD     lt_0,0(r_ptr)             ; rp[0] = lt[0]
-    STD     ht_0,8(r_ptr)             ; rp[1] = ht[1]
-
-    ADD     lt_1,m_1,lt_1             ; lt = lt+m
-    ADD,DC  ht_1,%r0,ht_1             ; ht[1]++
-    STD     lt_1,16(r_ptr)            ; rp[2] = lt[1]
-    STD     ht_1,24(r_ptr)            ; rp[3] = ht[1]
-
-	LDO    -2(num),num                ; num = num - 2;
-    LDO     16(a_ptr),a_ptr           ; ap += 2
-	CMPIB,<= 2,num,bn_sqr_words_unroll2
-    LDO     32(r_ptr),r_ptr           ; rp += 4
-
-    CMPIB,=,N 0,num,bn_sqr_words_exit ; are we done?
-
-	;
-	; Top of loop aligned on 64-byte boundary
-	;
-bn_sqr_words_single_top
-    FLDD    0(a_ptr),t_float_0        ; load up 64-bit value (fr8L) ht(L)/lt(R)
-
-    XMPYU   fht_0,flt_0,fm            ; m
-    FSTD    fm,-24(%sp)               ; store m
-
-    XMPYU   flt_0,flt_0,lt_temp       ; lt
-    FSTD    lt_temp,-16(%sp)          ; store lt
-
-    XMPYU   fht_0,fht_0,ht_temp       ; ht
-    FSTD    ht_temp,-8(%sp)           ; store ht
-
-    LDD     -24(%sp),m_0              ; load m
-    AND     m_0,high_mask,tmp_0       ; m & Mask
-    DEPD,Z  m_0,30,31,m_0             ; m << 32+1
-    LDD     -16(%sp),lt_0             ; lt
-
-    LDD     -8(%sp),ht_0              ; ht
-    EXTRD,U tmp_0,32,33,tmp_0         ; tmp_0 = m&Mask >> 32-1
-    ADD     m_0,lt_0,lt_0             ; lt = lt+m
-    ADD,L   ht_0,tmp_0,ht_0           ; ht += tmp_0
-    ADD,DC  ht_0,%r0,ht_0             ; ht++
-
-    STD     lt_0,0(r_ptr)             ; rp[0] = lt
-    STD     ht_0,8(r_ptr)             ; rp[1] = ht
-
-bn_sqr_words_exit
-    .EXIT
-    LDD     -112(%sp),%r5       ; restore r5  
-    LDD     -120(%sp),%r4       ; restore r4  
-    BVE     (%rp)
-    LDD,MB  -128(%sp),%r3 
-	.PROCEND	;in=23,24,25,26,29;out=28;
-
-
-;----------------------------------------------------------------------------
-;
-;BN_ULONG bn_add_words(BN_ULONG *r, BN_ULONG *a, BN_ULONG *b, int n)
-;
-; arg0 = rp 
-; arg1 = ap
-; arg2 = bp 
-; arg3 = n
-
-t  .reg %r22
-b  .reg %r21
-l  .reg %r20
-
-bn_add_words
-	.proc
-    .entry
-	.callinfo
-	.EXPORT	bn_add_words,ENTRY,PRIV_LEV=3,NO_RELOCATION,LONG_RETURN
-	.align 64
-
-    CMPIB,>= 0,n,bn_add_words_exit
-    COPY    %r0,%ret1           ; return 0 by default
-
-	;
-	; If 2 or more numbers do the loop
-	;
-	CMPIB,= 1,n,bn_add_words_single_top
-	NOP
-
-	;
-	; This loop is unrolled 2 times (64-byte aligned as well)
-	;
-bn_add_words_unroll2
-	LDD     0(a_ptr),t
-	LDD     0(b_ptr),b
-	ADD     t,%ret1,t                    ; t = t+c;
-	ADD,DC  %r0,%r0,%ret1                ; set c to carry
-	ADD     t,b,l                        ; l = t + b[0]
-	ADD,DC  %ret1,%r0,%ret1              ; c+= carry
-	STD     l,0(r_ptr)
-
-	LDD     8(a_ptr),t
-	LDD     8(b_ptr),b
-	ADD     t,%ret1,t                     ; t = t+c;
-	ADD,DC  %r0,%r0,%ret1                 ; set c to carry
-	ADD     t,b,l                         ; l = t + b[0]
-	ADD,DC  %ret1,%r0,%ret1               ; c+= carry
-	STD     l,8(r_ptr)
-
-	LDO     -2(n),n
-	LDO     16(a_ptr),a_ptr
-	LDO     16(b_ptr),b_ptr
-
-	CMPIB,<= 2,n,bn_add_words_unroll2
-	LDO     16(r_ptr),r_ptr
-
-    CMPIB,=,N 0,n,bn_add_words_exit ; are we done?
-
-bn_add_words_single_top
-	LDD     0(a_ptr),t
-	LDD     0(b_ptr),b
-
-	ADD     t,%ret1,t                 ; t = t+c;
-	ADD,DC  %r0,%r0,%ret1             ; set c to carry (could use CMPCLR??)
-	ADD     t,b,l                     ; l = t + b[0]
-	ADD,DC  %ret1,%r0,%ret1           ; c+= carry
-	STD     l,0(r_ptr)
-
-bn_add_words_exit
-    .EXIT
-    BVE     (%rp)
-    EXTRD,U %ret1,31,32,%ret0           ; for 32-bit, return in ret0/ret1
-	.PROCEND	;in=23,24,25,26,29;out=28;
-
-;----------------------------------------------------------------------------
-;
-;BN_ULONG bn_sub_words(BN_ULONG *r, BN_ULONG *a, BN_ULONG *b, int n)
-;
-; arg0 = rp 
-; arg1 = ap
-; arg2 = bp 
-; arg3 = n
-
-t1       .reg %r22
-t2       .reg %r21
-sub_tmp1 .reg %r20
-sub_tmp2 .reg %r19
-
-
-bn_sub_words
-	.proc
-	.callinfo 
-	.EXPORT	bn_sub_words,ENTRY,PRIV_LEV=3,NO_RELOCATION,LONG_RETURN
-    .entry
-	.align 64
-
-    CMPIB,>=  0,n,bn_sub_words_exit
-    COPY    %r0,%ret1           ; return 0 by default
-
-	;
-	; If 2 or more numbers do the loop
-	;
-	CMPIB,= 1,n,bn_sub_words_single_top
-	NOP
-
-	;
-	; This loop is unrolled 2 times (64-byte aligned as well)
-	;
-bn_sub_words_unroll2
-	LDD     0(a_ptr),t1
-	LDD     0(b_ptr),t2
-	SUB     t1,t2,sub_tmp1           ; t3 = t1-t2; 
-	SUB     sub_tmp1,%ret1,sub_tmp1  ; t3 = t3- c; 
-
-	CMPCLR,*>> t1,t2,sub_tmp2        ; clear if t1 > t2
-	LDO      1(%r0),sub_tmp2
-	
-	CMPCLR,*= t1,t2,%r0
-	COPY    sub_tmp2,%ret1
-	STD     sub_tmp1,0(r_ptr)
-
-	LDD     8(a_ptr),t1
-	LDD     8(b_ptr),t2
-	SUB     t1,t2,sub_tmp1            ; t3 = t1-t2; 
-	SUB     sub_tmp1,%ret1,sub_tmp1   ; t3 = t3- c; 
-	CMPCLR,*>> t1,t2,sub_tmp2         ; clear if t1 > t2
-	LDO      1(%r0),sub_tmp2
-	
-	CMPCLR,*= t1,t2,%r0
-	COPY    sub_tmp2,%ret1
-	STD     sub_tmp1,8(r_ptr)
-
-	LDO     -2(n),n
-	LDO     16(a_ptr),a_ptr
-	LDO     16(b_ptr),b_ptr
-
-	CMPIB,<= 2,n,bn_sub_words_unroll2
-	LDO     16(r_ptr),r_ptr
-
-    CMPIB,=,N 0,n,bn_sub_words_exit ; are we done?
-
-bn_sub_words_single_top
-	LDD     0(a_ptr),t1
-	LDD     0(b_ptr),t2
-	SUB     t1,t2,sub_tmp1            ; t3 = t1-t2; 
-	SUB     sub_tmp1,%ret1,sub_tmp1   ; t3 = t3- c; 
-	CMPCLR,*>> t1,t2,sub_tmp2         ; clear if t1 > t2
-	LDO      1(%r0),sub_tmp2
-	
-	CMPCLR,*= t1,t2,%r0
-	COPY    sub_tmp2,%ret1
-
-	STD     sub_tmp1,0(r_ptr)
-
-bn_sub_words_exit
-    .EXIT
-    BVE     (%rp)
-    EXTRD,U %ret1,31,32,%ret0           ; for 32-bit, return in ret0/ret1
-	.PROCEND	;in=23,24,25,26,29;out=28;
-
-;------------------------------------------------------------------------------
-;
-; unsigned long bn_div_words(unsigned long h, unsigned long l, unsigned long d)
-;
-; arg0 = h
-; arg1 = l
-; arg2 = d
-;
-; This is mainly just output from the HP C compiler.  
-;
-;------------------------------------------------------------------------------
-bn_div_words
-	.PROC
-	.EXPORT	bn_div_words,ENTRY,PRIV_LEV=3,ARGW0=GR,ARGW1=GR,ARGW2=GR,ARGW3=GR,RTNVAL=GR,LONG_RETURN
-	.IMPORT	BN_num_bits_word,CODE
-	;--- not PIC	.IMPORT	__iob,DATA
-	;--- not PIC	.IMPORT	fprintf,CODE
-	.IMPORT	abort,CODE
-	.IMPORT	$$div2U,MILLICODE
-	.CALLINFO CALLER,FRAME=144,ENTRY_GR=%r9,SAVE_RP,ARGS_SAVED,ORDERING_AWARE
-        .ENTRY
-        STW     %r2,-20(%r30)   ;offset 0x8ec
-        STW,MA  %r3,192(%r30)   ;offset 0x8f0
-        STW     %r4,-188(%r30)  ;offset 0x8f4
-        DEPD    %r5,31,32,%r6   ;offset 0x8f8
-        STD     %r6,-184(%r30)  ;offset 0x8fc
-        DEPD    %r7,31,32,%r8   ;offset 0x900
-        STD     %r8,-176(%r30)  ;offset 0x904
-        STW     %r9,-168(%r30)  ;offset 0x908
-        LDD     -248(%r30),%r3  ;offset 0x90c
-        COPY    %r26,%r4        ;offset 0x910
-        COPY    %r24,%r5        ;offset 0x914
-        DEPD    %r25,31,32,%r4  ;offset 0x918
-        CMPB,*<>        %r3,%r0,$0006000C       ;offset 0x91c
-        DEPD    %r23,31,32,%r5  ;offset 0x920
-        MOVIB,TR        -1,%r29,$00060002       ;offset 0x924
-        EXTRD,U %r29,31,32,%r28 ;offset 0x928
-$0006002A
-        LDO     -1(%r29),%r29   ;offset 0x92c
-        SUB     %r23,%r7,%r23   ;offset 0x930
-$00060024
-        SUB     %r4,%r31,%r25   ;offset 0x934
-        AND     %r25,%r19,%r26  ;offset 0x938
-        CMPB,*<>,N      %r0,%r26,$00060046      ;offset 0x93c
-        DEPD,Z  %r25,31,32,%r20 ;offset 0x940
-        OR      %r20,%r24,%r21  ;offset 0x944
-        CMPB,*<<,N      %r21,%r23,$0006002A     ;offset 0x948
-        SUB     %r31,%r2,%r31   ;offset 0x94c
-$00060046
-$0006002E
-        DEPD,Z  %r23,31,32,%r25 ;offset 0x950
-        EXTRD,U %r23,31,32,%r26 ;offset 0x954
-        AND     %r25,%r19,%r24  ;offset 0x958
-        ADD,L   %r31,%r26,%r31  ;offset 0x95c
-        CMPCLR,*>>=     %r5,%r24,%r0    ;offset 0x960
-        LDO     1(%r31),%r31    ;offset 0x964
-$00060032
-        CMPB,*<<=,N     %r31,%r4,$00060036      ;offset 0x968
-        LDO     -1(%r29),%r29   ;offset 0x96c
-        ADD,L   %r4,%r3,%r4     ;offset 0x970
-$00060036
-        ADDIB,=,N       -1,%r8,$D0      ;offset 0x974
-        SUB     %r5,%r24,%r28   ;offset 0x978
-$0006003A
-        SUB     %r4,%r31,%r24   ;offset 0x97c
-        SHRPD   %r24,%r28,32,%r4        ;offset 0x980
-        DEPD,Z  %r29,31,32,%r9  ;offset 0x984
-        DEPD,Z  %r28,31,32,%r5  ;offset 0x988
-$0006001C
-        EXTRD,U %r4,31,32,%r31  ;offset 0x98c
-        CMPB,*<>,N      %r31,%r2,$00060020      ;offset 0x990
-        MOVB,TR %r6,%r29,$D1    ;offset 0x994
-        STD     %r29,-152(%r30) ;offset 0x998
-$0006000C
-        EXTRD,U %r3,31,32,%r25  ;offset 0x99c
-        COPY    %r3,%r26        ;offset 0x9a0
-        EXTRD,U %r3,31,32,%r9   ;offset 0x9a4
-        EXTRD,U %r4,31,32,%r8   ;offset 0x9a8
-        .CALL   ARGW0=GR,ARGW1=GR,RTNVAL=GR     ;in=25,26;out=28;
-        B,L     BN_num_bits_word,%r2    ;offset 0x9ac
-        EXTRD,U %r5,31,32,%r7   ;offset 0x9b0
-        LDI     64,%r20 ;offset 0x9b4
-        DEPD    %r7,31,32,%r5   ;offset 0x9b8
-        DEPD    %r8,31,32,%r4   ;offset 0x9bc
-        DEPD    %r9,31,32,%r3   ;offset 0x9c0
-        CMPB,=  %r28,%r20,$00060012     ;offset 0x9c4
-        COPY    %r28,%r24       ;offset 0x9c8
-        MTSARCM %r24    ;offset 0x9cc
-        DEPDI,Z -1,%sar,1,%r19  ;offset 0x9d0
-        CMPB,*>>,N      %r4,%r19,$D2    ;offset 0x9d4
-$00060012
-        SUBI    64,%r24,%r31    ;offset 0x9d8
-        CMPCLR,*<<      %r4,%r3,%r0     ;offset 0x9dc
-        SUB     %r4,%r3,%r4     ;offset 0x9e0
-$00060016
-        CMPB,=  %r31,%r0,$0006001A      ;offset 0x9e4
-        COPY    %r0,%r9 ;offset 0x9e8
-        MTSARCM %r31    ;offset 0x9ec
-        DEPD,Z  %r3,%sar,64,%r3 ;offset 0x9f0
-        SUBI    64,%r31,%r26    ;offset 0x9f4
-        MTSAR   %r26    ;offset 0x9f8
-        SHRPD   %r4,%r5,%sar,%r4        ;offset 0x9fc
-        MTSARCM %r31    ;offset 0xa00
-        DEPD,Z  %r5,%sar,64,%r5 ;offset 0xa04
-$0006001A
-        DEPDI,Z -1,31,32,%r19   ;offset 0xa08
-        AND     %r3,%r19,%r29   ;offset 0xa0c
-        EXTRD,U %r29,31,32,%r2  ;offset 0xa10
-        DEPDI,Z -1,63,32,%r6    ;offset 0xa14
-        MOVIB,TR        2,%r8,$0006001C ;offset 0xa18
-        EXTRD,U %r3,63,32,%r7   ;offset 0xa1c
-$D2
-        ;--- not PIC	ADDIL   LR'__iob-$global$,%r27,%r1      ;offset 0xa20
-        ;--- not PIC	LDIL    LR'C$7,%r21     ;offset 0xa24
-        ;--- not PIC	LDO     RR'__iob-$global$+32(%r1),%r26  ;offset 0xa28
-        ;--- not PIC	.CALL   ARGW0=GR,ARGW1=GR,ARGW2=GR,RTNVAL=GR    ;in=24,25,26;out=28;
-        ;--- not PIC	B,L     fprintf,%r2     ;offset 0xa2c
-        ;--- not PIC	LDO     RR'C$7(%r21),%r25       ;offset 0xa30
-        .CALL           ;
-        B,L     abort,%r2       ;offset 0xa34
-        NOP             ;offset 0xa38
-        B       $D3     ;offset 0xa3c
-        LDW     -212(%r30),%r2  ;offset 0xa40
-$00060020
-        COPY    %r4,%r26        ;offset 0xa44
-        EXTRD,U %r4,31,32,%r25  ;offset 0xa48
-        COPY    %r2,%r24        ;offset 0xa4c
-        .CALL   ;in=23,24,25,26;out=20,21,22,28,29; (MILLICALL)
-        B,L     $$div2U,%r31    ;offset 0xa50
-        EXTRD,U %r2,31,32,%r23  ;offset 0xa54
-        DEPD    %r28,31,32,%r29 ;offset 0xa58
-$00060022
-        STD     %r29,-152(%r30) ;offset 0xa5c
-$D1
-        AND     %r5,%r19,%r24   ;offset 0xa60
-        EXTRD,U %r24,31,32,%r24 ;offset 0xa64
-        STW     %r2,-160(%r30)  ;offset 0xa68
-        STW     %r7,-128(%r30)  ;offset 0xa6c
-        FLDD    -152(%r30),%fr4 ;offset 0xa70
-        FLDD    -152(%r30),%fr7 ;offset 0xa74
-        FLDW    -160(%r30),%fr8L        ;offset 0xa78
-        FLDW    -128(%r30),%fr5L        ;offset 0xa7c
-        XMPYU   %fr8L,%fr7L,%fr10       ;offset 0xa80
-        FSTD    %fr10,-136(%r30)        ;offset 0xa84
-        XMPYU   %fr8L,%fr7R,%fr22       ;offset 0xa88
-        FSTD    %fr22,-144(%r30)        ;offset 0xa8c
-        XMPYU   %fr5L,%fr4L,%fr11       ;offset 0xa90
-        XMPYU   %fr5L,%fr4R,%fr23       ;offset 0xa94
-        FSTD    %fr11,-112(%r30)        ;offset 0xa98
-        FSTD    %fr23,-120(%r30)        ;offset 0xa9c
-        LDD     -136(%r30),%r28 ;offset 0xaa0
-        DEPD,Z  %r28,31,32,%r31 ;offset 0xaa4
-        LDD     -144(%r30),%r20 ;offset 0xaa8
-        ADD,L   %r20,%r31,%r31  ;offset 0xaac
-        LDD     -112(%r30),%r22 ;offset 0xab0
-        DEPD,Z  %r22,31,32,%r22 ;offset 0xab4
-        LDD     -120(%r30),%r21 ;offset 0xab8
-        B       $00060024       ;offset 0xabc
-        ADD,L   %r21,%r22,%r23  ;offset 0xac0
-$D0
-        OR      %r9,%r29,%r29   ;offset 0xac4
-$00060040
-        EXTRD,U %r29,31,32,%r28 ;offset 0xac8
-$00060002
-$L2
-        LDW     -212(%r30),%r2  ;offset 0xacc
-$D3
-        LDW     -168(%r30),%r9  ;offset 0xad0
-        LDD     -176(%r30),%r8  ;offset 0xad4
-        EXTRD,U %r8,31,32,%r7   ;offset 0xad8
-        LDD     -184(%r30),%r6  ;offset 0xadc
-        EXTRD,U %r6,31,32,%r5   ;offset 0xae0
-        LDW     -188(%r30),%r4  ;offset 0xae4
-        BVE     (%r2)   ;offset 0xae8
-        .EXIT
-        LDW,MB  -192(%r30),%r3  ;offset 0xaec
-	.PROCEND	;in=23,25;out=28,29;fpin=105,107;
-
-
-
-
-;----------------------------------------------------------------------------
-;
-; Registers to hold 64-bit values to manipulate.  The "L" part
-; of the register corresponds to the upper 32-bits, while the "R"
-; part corresponds to the lower 32-bits
-; 
-; Note, that when using b6 and b7, the code must save these before
-; using them because they are callee save registers 
-; 
-;
-; Floating point registers to use to save values that
-; are manipulated.  These don't collide with ftemp1-6 and
-; are all caller save registers
-;
-a0        .reg %fr22
-a0L       .reg %fr22L
-a0R       .reg %fr22R
-
-a1        .reg %fr23
-a1L       .reg %fr23L
-a1R       .reg %fr23R
-
-a2        .reg %fr24
-a2L       .reg %fr24L
-a2R       .reg %fr24R
-
-a3        .reg %fr25
-a3L       .reg %fr25L
-a3R       .reg %fr25R
-
-a4        .reg %fr26
-a4L       .reg %fr26L
-a4R       .reg %fr26R
-
-a5        .reg %fr27
-a5L       .reg %fr27L
-a5R       .reg %fr27R
-
-a6        .reg %fr28
-a6L       .reg %fr28L
-a6R       .reg %fr28R
-
-a7        .reg %fr29
-a7L       .reg %fr29L
-a7R       .reg %fr29R
-
-b0        .reg %fr30
-b0L       .reg %fr30L
-b0R       .reg %fr30R
-
-b1        .reg %fr31
-b1L       .reg %fr31L
-b1R       .reg %fr31R
-
-;
-; Temporary floating point variables, these are all caller save
-; registers
-;
-ftemp1    .reg %fr4
-ftemp2    .reg %fr5
-ftemp3    .reg %fr6
-ftemp4    .reg %fr7
-
-;
-; The B set of registers when used.
-;
-
-b2        .reg %fr8
-b2L       .reg %fr8L
-b2R       .reg %fr8R
-
-b3        .reg %fr9
-b3L       .reg %fr9L
-b3R       .reg %fr9R
-
-b4        .reg %fr10
-b4L       .reg %fr10L
-b4R       .reg %fr10R
-
-b5        .reg %fr11
-b5L       .reg %fr11L
-b5R       .reg %fr11R
-
-b6        .reg %fr12
-b6L       .reg %fr12L
-b6R       .reg %fr12R
-
-b7        .reg %fr13
-b7L       .reg %fr13L
-b7R       .reg %fr13R
-
-c1           .reg %r21   ; only reg
-temp1        .reg %r20   ; only reg
-temp2        .reg %r19   ; only reg
-temp3        .reg %r31   ; only reg
-
-m1           .reg %r28   
-c2           .reg %r23   
-high_one     .reg %r1
-ht           .reg %r6
-lt           .reg %r5
-m            .reg %r4
-c3           .reg %r3
-
-SQR_ADD_C  .macro  A0L,A0R,C1,C2,C3
-    XMPYU   A0L,A0R,ftemp1       ; m
-    FSTD    ftemp1,-24(%sp)      ; store m
-
-    XMPYU   A0R,A0R,ftemp2       ; lt
-    FSTD    ftemp2,-16(%sp)      ; store lt
-
-    XMPYU   A0L,A0L,ftemp3       ; ht
-    FSTD    ftemp3,-8(%sp)       ; store ht
-
-    LDD     -24(%sp),m           ; load m
-    AND     m,high_mask,temp2    ; m & Mask
-    DEPD,Z  m,30,31,temp3        ; m << 32+1
-    LDD     -16(%sp),lt          ; lt
-
-    LDD     -8(%sp),ht           ; ht
-    EXTRD,U temp2,32,33,temp1    ; temp1 = m&Mask >> 32-1
-    ADD     temp3,lt,lt          ; lt = lt+m
-    ADD,L   ht,temp1,ht          ; ht += temp1
-    ADD,DC  ht,%r0,ht            ; ht++
-
-    ADD     C1,lt,C1             ; c1=c1+lt
-    ADD,DC  ht,%r0,ht            ; ht++
-
-    ADD     C2,ht,C2             ; c2=c2+ht
-    ADD,DC  C3,%r0,C3            ; c3++
-.endm
-
-SQR_ADD_C2 .macro  A0L,A0R,A1L,A1R,C1,C2,C3
-    XMPYU   A0L,A1R,ftemp1          ; m1 = bl*ht
-    FSTD    ftemp1,-16(%sp)         ;
-    XMPYU   A0R,A1L,ftemp2          ; m = bh*lt
-    FSTD    ftemp2,-8(%sp)          ;
-    XMPYU   A0R,A1R,ftemp3          ; lt = bl*lt
-    FSTD    ftemp3,-32(%sp)
-    XMPYU   A0L,A1L,ftemp4          ; ht = bh*ht
-    FSTD    ftemp4,-24(%sp)         ;
-
-    LDD     -8(%sp),m               ; r21 = m
-    LDD     -16(%sp),m1             ; r19 = m1
-    ADD,L   m,m1,m                  ; m+m1
-
-    DEPD,Z  m,31,32,temp3           ; (m+m1<<32)
-    LDD     -24(%sp),ht             ; r24 = ht
-
-    CMPCLR,*>>= m,m1,%r0            ; if (m < m1)
-    ADD,L   ht,high_one,ht          ; ht+=high_one
-
-    EXTRD,U m,31,32,temp1           ; m >> 32
-    LDD     -32(%sp),lt             ; lt
-    ADD,L   ht,temp1,ht             ; ht+= m>>32
-    ADD     lt,temp3,lt             ; lt = lt+m1
-    ADD,DC  ht,%r0,ht               ; ht++
-
-    ADD     ht,ht,ht                ; ht=ht+ht;
-    ADD,DC  C3,%r0,C3               ; add in carry (c3++)
-
-    ADD     lt,lt,lt                ; lt=lt+lt;
-    ADD,DC  ht,%r0,ht               ; add in carry (ht++)
-
-    ADD     C1,lt,C1                ; c1=c1+lt
-    ADD,DC,*NUV ht,%r0,ht           ; add in carry (ht++)
-    LDO     1(C3),C3              ; bump c3 if overflow,nullify otherwise
-
-    ADD     C2,ht,C2                ; c2 = c2 + ht
-    ADD,DC  C3,%r0,C3             ; add in carry (c3++)
-.endm
-
-;
-;void bn_sqr_comba8(BN_ULONG *r, BN_ULONG *a)
-; arg0 = r_ptr
-; arg1 = a_ptr
-;
-
-bn_sqr_comba8
-	.PROC
-	.CALLINFO FRAME=128,ENTRY_GR=%r3,ARGS_SAVED,ORDERING_AWARE
-	.EXPORT	bn_sqr_comba8,ENTRY,PRIV_LEV=3,NO_RELOCATION,LONG_RETURN
-    .ENTRY
-	.align 64
-
-    STD     %r3,0(%sp)          ; save r3
-    STD     %r4,8(%sp)          ; save r4
-    STD     %r5,16(%sp)         ; save r5
-    STD     %r6,24(%sp)         ; save r6
-
-	;
-	; Zero out carries
-	;
-	COPY     %r0,c1
-	COPY     %r0,c2
-	COPY     %r0,c3
-
-	LDO      128(%sp),%sp       ; bump stack
-    DEPDI,Z -1,32,33,high_mask   ; Create Mask 0xffffffff80000000L
-    DEPDI,Z  1,31,1,high_one     ; Create Value  1 << 32
-
-	;
-	; Load up all of the values we are going to use
-	;
-    FLDD     0(a_ptr),a0       
-    FLDD     8(a_ptr),a1       
-    FLDD    16(a_ptr),a2       
-    FLDD    24(a_ptr),a3       
-    FLDD    32(a_ptr),a4       
-    FLDD    40(a_ptr),a5       
-    FLDD    48(a_ptr),a6       
-    FLDD    56(a_ptr),a7       
-
-	SQR_ADD_C a0L,a0R,c1,c2,c3
-	STD     c1,0(r_ptr)          ; r[0] = c1;
-	COPY    %r0,c1
-
-	SQR_ADD_C2 a1L,a1R,a0L,a0R,c2,c3,c1
-	STD     c2,8(r_ptr)          ; r[1] = c2;
-	COPY    %r0,c2
-
-	SQR_ADD_C a1L,a1R,c3,c1,c2
-	SQR_ADD_C2 a2L,a2R,a0L,a0R,c3,c1,c2
-	STD     c3,16(r_ptr)            ; r[2] = c3;
-	COPY    %r0,c3
-
-	SQR_ADD_C2 a3L,a3R,a0L,a0R,c1,c2,c3
-	SQR_ADD_C2 a2L,a2R,a1L,a1R,c1,c2,c3
-	STD     c1,24(r_ptr)           ; r[3] = c1;
-	COPY    %r0,c1
-
-	SQR_ADD_C a2L,a2R,c2,c3,c1
-	SQR_ADD_C2 a3L,a3R,a1L,a1R,c2,c3,c1
-	SQR_ADD_C2 a4L,a4R,a0L,a0R,c2,c3,c1
-	STD     c2,32(r_ptr)          ; r[4] = c2;
-	COPY    %r0,c2
-
-	SQR_ADD_C2 a5L,a5R,a0L,a0R,c3,c1,c2
-	SQR_ADD_C2 a4L,a4R,a1L,a1R,c3,c1,c2
-	SQR_ADD_C2 a3L,a3R,a2L,a2R,c3,c1,c2
-	STD     c3,40(r_ptr)          ; r[5] = c3;
-	COPY    %r0,c3
-
-	SQR_ADD_C a3L,a3R,c1,c2,c3
-	SQR_ADD_C2 a4L,a4R,a2L,a2R,c1,c2,c3
-	SQR_ADD_C2 a5L,a5R,a1L,a1R,c1,c2,c3
-	SQR_ADD_C2 a6L,a6R,a0L,a0R,c1,c2,c3
-	STD     c1,48(r_ptr)          ; r[6] = c1;
-	COPY    %r0,c1
-
-	SQR_ADD_C2 a7L,a7R,a0L,a0R,c2,c3,c1
-	SQR_ADD_C2 a6L,a6R,a1L,a1R,c2,c3,c1
-	SQR_ADD_C2 a5L,a5R,a2L,a2R,c2,c3,c1
-	SQR_ADD_C2 a4L,a4R,a3L,a3R,c2,c3,c1
-	STD     c2,56(r_ptr)          ; r[7] = c2;
-	COPY    %r0,c2
-
-	SQR_ADD_C a4L,a4R,c3,c1,c2
-	SQR_ADD_C2 a5L,a5R,a3L,a3R,c3,c1,c2
-	SQR_ADD_C2 a6L,a6R,a2L,a2R,c3,c1,c2
-	SQR_ADD_C2 a7L,a7R,a1L,a1R,c3,c1,c2
-	STD     c3,64(r_ptr)          ; r[8] = c3;
-	COPY    %r0,c3
-
-	SQR_ADD_C2 a7L,a7R,a2L,a2R,c1,c2,c3
-	SQR_ADD_C2 a6L,a6R,a3L,a3R,c1,c2,c3
-	SQR_ADD_C2 a5L,a5R,a4L,a4R,c1,c2,c3
-	STD     c1,72(r_ptr)          ; r[9] = c1;
-	COPY    %r0,c1
-
-	SQR_ADD_C a5L,a5R,c2,c3,c1
-	SQR_ADD_C2 a6L,a6R,a4L,a4R,c2,c3,c1
-	SQR_ADD_C2 a7L,a7R,a3L,a3R,c2,c3,c1
-	STD     c2,80(r_ptr)          ; r[10] = c2;
-	COPY    %r0,c2
-
-	SQR_ADD_C2 a7L,a7R,a4L,a4R,c3,c1,c2
-	SQR_ADD_C2 a6L,a6R,a5L,a5R,c3,c1,c2
-	STD     c3,88(r_ptr)          ; r[11] = c3;
-	COPY    %r0,c3
-	
-	SQR_ADD_C a6L,a6R,c1,c2,c3
-	SQR_ADD_C2 a7L,a7R,a5L,a5R,c1,c2,c3
-	STD     c1,96(r_ptr)          ; r[12] = c1;
-	COPY    %r0,c1
-
-	SQR_ADD_C2 a7L,a7R,a6L,a6R,c2,c3,c1
-	STD     c2,104(r_ptr)         ; r[13] = c2;
-	COPY    %r0,c2
-
-	SQR_ADD_C a7L,a7R,c3,c1,c2
-	STD     c3, 112(r_ptr)       ; r[14] = c3
-	STD     c1, 120(r_ptr)       ; r[15] = c1
-
-    .EXIT
-    LDD     -104(%sp),%r6        ; restore r6
-    LDD     -112(%sp),%r5        ; restore r5
-    LDD     -120(%sp),%r4        ; restore r4
-    BVE     (%rp)
-    LDD,MB  -128(%sp),%r3
-
-	.PROCEND	
-
-;-----------------------------------------------------------------------------
-;
-;void bn_sqr_comba4(BN_ULONG *r, BN_ULONG *a)
-; arg0 = r_ptr
-; arg1 = a_ptr
-;
-
-bn_sqr_comba4
-	.proc
-	.callinfo FRAME=128,ENTRY_GR=%r3,ARGS_SAVED,ORDERING_AWARE
-	.EXPORT	bn_sqr_comba4,ENTRY,PRIV_LEV=3,NO_RELOCATION,LONG_RETURN
-    .entry
-	.align 64
-    STD     %r3,0(%sp)          ; save r3
-    STD     %r4,8(%sp)          ; save r4
-    STD     %r5,16(%sp)         ; save r5
-    STD     %r6,24(%sp)         ; save r6
-
-	;
-	; Zero out carries
-	;
-	COPY     %r0,c1
-	COPY     %r0,c2
-	COPY     %r0,c3
-
-	LDO      128(%sp),%sp       ; bump stack
-    DEPDI,Z -1,32,33,high_mask   ; Create Mask 0xffffffff80000000L
-    DEPDI,Z  1,31,1,high_one     ; Create Value  1 << 32
-
-	;
-	; Load up all of the values we are going to use
-	;
-    FLDD     0(a_ptr),a0       
-    FLDD     8(a_ptr),a1       
-    FLDD    16(a_ptr),a2       
-    FLDD    24(a_ptr),a3       
-    FLDD    32(a_ptr),a4       
-    FLDD    40(a_ptr),a5       
-    FLDD    48(a_ptr),a6       
-    FLDD    56(a_ptr),a7       
-
-	SQR_ADD_C a0L,a0R,c1,c2,c3
-
-	STD     c1,0(r_ptr)          ; r[0] = c1;
-	COPY    %r0,c1
-
-	SQR_ADD_C2 a1L,a1R,a0L,a0R,c2,c3,c1
-
-	STD     c2,8(r_ptr)          ; r[1] = c2;
-	COPY    %r0,c2
-
-	SQR_ADD_C a1L,a1R,c3,c1,c2
-	SQR_ADD_C2 a2L,a2R,a0L,a0R,c3,c1,c2
-
-	STD     c3,16(r_ptr)            ; r[2] = c3;
-	COPY    %r0,c3
-
-	SQR_ADD_C2 a3L,a3R,a0L,a0R,c1,c2,c3
-	SQR_ADD_C2 a2L,a2R,a1L,a1R,c1,c2,c3
-
-	STD     c1,24(r_ptr)           ; r[3] = c1;
-	COPY    %r0,c1
-
-	SQR_ADD_C a2L,a2R,c2,c3,c1
-	SQR_ADD_C2 a3L,a3R,a1L,a1R,c2,c3,c1
-
-	STD     c2,32(r_ptr)           ; r[4] = c2;
-	COPY    %r0,c2
-
-	SQR_ADD_C2 a3L,a3R,a2L,a2R,c3,c1,c2
-	STD     c3,40(r_ptr)           ; r[5] = c3;
-	COPY    %r0,c3
-
-	SQR_ADD_C a3L,a3R,c1,c2,c3
-	STD     c1,48(r_ptr)           ; r[6] = c1;
-	STD     c2,56(r_ptr)           ; r[7] = c2;
-
-    .EXIT
-    LDD     -104(%sp),%r6        ; restore r6
-    LDD     -112(%sp),%r5        ; restore r5
-    LDD     -120(%sp),%r4        ; restore r4
-    BVE     (%rp)
-    LDD,MB  -128(%sp),%r3
-
-	.PROCEND	
-
-
-;---------------------------------------------------------------------------
-
-MUL_ADD_C  .macro  A0L,A0R,B0L,B0R,C1,C2,C3
-    XMPYU   A0L,B0R,ftemp1        ; m1 = bl*ht
-    FSTD    ftemp1,-16(%sp)       ;
-    XMPYU   A0R,B0L,ftemp2        ; m = bh*lt
-    FSTD    ftemp2,-8(%sp)        ;
-    XMPYU   A0R,B0R,ftemp3        ; lt = bl*lt
-    FSTD    ftemp3,-32(%sp)
-    XMPYU   A0L,B0L,ftemp4        ; ht = bh*ht
-    FSTD    ftemp4,-24(%sp)       ;
-
-    LDD     -8(%sp),m             ; r21 = m
-    LDD     -16(%sp),m1           ; r19 = m1
-    ADD,L   m,m1,m                ; m+m1
-
-    DEPD,Z  m,31,32,temp3         ; (m+m1<<32)
-    LDD     -24(%sp),ht           ; r24 = ht
-
-    CMPCLR,*>>= m,m1,%r0          ; if (m < m1)
-    ADD,L   ht,high_one,ht        ; ht+=high_one
-
-    EXTRD,U m,31,32,temp1         ; m >> 32
-    LDD     -32(%sp),lt           ; lt
-    ADD,L   ht,temp1,ht           ; ht+= m>>32
-    ADD     lt,temp3,lt           ; lt = lt+m1
-    ADD,DC  ht,%r0,ht             ; ht++
-
-    ADD     C1,lt,C1              ; c1=c1+lt
-    ADD,DC  ht,%r0,ht             ; bump c3 if overflow,nullify otherwise
-
-    ADD     C2,ht,C2              ; c2 = c2 + ht
-    ADD,DC  C3,%r0,C3             ; add in carry (c3++)
-.endm
-
-
-;
-;void bn_mul_comba8(BN_ULONG *r, BN_ULONG *a, BN_ULONG *b)
-; arg0 = r_ptr
-; arg1 = a_ptr
-; arg2 = b_ptr
-;
-
-bn_mul_comba8
-	.proc
-	.callinfo FRAME=128,ENTRY_GR=%r3,ARGS_SAVED,ORDERING_AWARE
-	.EXPORT	bn_mul_comba8,ENTRY,PRIV_LEV=3,NO_RELOCATION,LONG_RETURN
-    .entry
-	.align 64
-
-    STD     %r3,0(%sp)          ; save r3
-    STD     %r4,8(%sp)          ; save r4
-    STD     %r5,16(%sp)         ; save r5
-    STD     %r6,24(%sp)         ; save r6
-    FSTD    %fr12,32(%sp)       ; save r6
-    FSTD    %fr13,40(%sp)       ; save r7
-
-	;
-	; Zero out carries
-	;
-	COPY     %r0,c1
-	COPY     %r0,c2
-	COPY     %r0,c3
-
-	LDO      128(%sp),%sp       ; bump stack
-    DEPDI,Z  1,31,1,high_one     ; Create Value  1 << 32
-
-	;
-	; Load up all of the values we are going to use
-	;
-    FLDD      0(a_ptr),a0       
-    FLDD      8(a_ptr),a1       
-    FLDD     16(a_ptr),a2       
-    FLDD     24(a_ptr),a3       
-    FLDD     32(a_ptr),a4       
-    FLDD     40(a_ptr),a5       
-    FLDD     48(a_ptr),a6       
-    FLDD     56(a_ptr),a7       
-
-    FLDD      0(b_ptr),b0       
-    FLDD      8(b_ptr),b1       
-    FLDD     16(b_ptr),b2       
-    FLDD     24(b_ptr),b3       
-    FLDD     32(b_ptr),b4       
-    FLDD     40(b_ptr),b5       
-    FLDD     48(b_ptr),b6       
-    FLDD     56(b_ptr),b7       
-
-	MUL_ADD_C a0L,a0R,b0L,b0R,c1,c2,c3
-	STD       c1,0(r_ptr)
-	COPY      %r0,c1
-
-	MUL_ADD_C a0L,a0R,b1L,b1R,c2,c3,c1
-	MUL_ADD_C a1L,a1R,b0L,b0R,c2,c3,c1
-	STD       c2,8(r_ptr)
-	COPY      %r0,c2
-
-	MUL_ADD_C a2L,a2R,b0L,b0R,c3,c1,c2
-	MUL_ADD_C a1L,a1R,b1L,b1R,c3,c1,c2
-	MUL_ADD_C a0L,a0R,b2L,b2R,c3,c1,c2
-	STD       c3,16(r_ptr)
-	COPY      %r0,c3
-
-	MUL_ADD_C a0L,a0R,b3L,b3R,c1,c2,c3
-	MUL_ADD_C a1L,a1R,b2L,b2R,c1,c2,c3
-	MUL_ADD_C a2L,a2R,b1L,b1R,c1,c2,c3
-	MUL_ADD_C a3L,a3R,b0L,b0R,c1,c2,c3
-	STD       c1,24(r_ptr)
-	COPY      %r0,c1
-
-	MUL_ADD_C a4L,a4R,b0L,b0R,c2,c3,c1
-	MUL_ADD_C a3L,a3R,b1L,b1R,c2,c3,c1
-	MUL_ADD_C a2L,a2R,b2L,b2R,c2,c3,c1
-	MUL_ADD_C a1L,a1R,b3L,b3R,c2,c3,c1
-	MUL_ADD_C a0L,a0R,b4L,b4R,c2,c3,c1
-	STD       c2,32(r_ptr)
-	COPY      %r0,c2
-
-	MUL_ADD_C a0L,a0R,b5L,b5R,c3,c1,c2
-	MUL_ADD_C a1L,a1R,b4L,b4R,c3,c1,c2
-	MUL_ADD_C a2L,a2R,b3L,b3R,c3,c1,c2
-	MUL_ADD_C a3L,a3R,b2L,b2R,c3,c1,c2
-	MUL_ADD_C a4L,a4R,b1L,b1R,c3,c1,c2
-	MUL_ADD_C a5L,a5R,b0L,b0R,c3,c1,c2
-	STD       c3,40(r_ptr)
-	COPY      %r0,c3
-
-	MUL_ADD_C a6L,a6R,b0L,b0R,c1,c2,c3
-	MUL_ADD_C a5L,a5R,b1L,b1R,c1,c2,c3
-	MUL_ADD_C a4L,a4R,b2L,b2R,c1,c2,c3
-	MUL_ADD_C a3L,a3R,b3L,b3R,c1,c2,c3
-	MUL_ADD_C a2L,a2R,b4L,b4R,c1,c2,c3
-	MUL_ADD_C a1L,a1R,b5L,b5R,c1,c2,c3
-	MUL_ADD_C a0L,a0R,b6L,b6R,c1,c2,c3
-	STD       c1,48(r_ptr)
-	COPY      %r0,c1
-	
-	MUL_ADD_C a0L,a0R,b7L,b7R,c2,c3,c1
-	MUL_ADD_C a1L,a1R,b6L,b6R,c2,c3,c1
-	MUL_ADD_C a2L,a2R,b5L,b5R,c2,c3,c1
-	MUL_ADD_C a3L,a3R,b4L,b4R,c2,c3,c1
-	MUL_ADD_C a4L,a4R,b3L,b3R,c2,c3,c1
-	MUL_ADD_C a5L,a5R,b2L,b2R,c2,c3,c1
-	MUL_ADD_C a6L,a6R,b1L,b1R,c2,c3,c1
-	MUL_ADD_C a7L,a7R,b0L,b0R,c2,c3,c1
-	STD       c2,56(r_ptr)
-	COPY      %r0,c2
-
-	MUL_ADD_C a7L,a7R,b1L,b1R,c3,c1,c2
-	MUL_ADD_C a6L,a6R,b2L,b2R,c3,c1,c2
-	MUL_ADD_C a5L,a5R,b3L,b3R,c3,c1,c2
-	MUL_ADD_C a4L,a4R,b4L,b4R,c3,c1,c2
-	MUL_ADD_C a3L,a3R,b5L,b5R,c3,c1,c2
-	MUL_ADD_C a2L,a2R,b6L,b6R,c3,c1,c2
-	MUL_ADD_C a1L,a1R,b7L,b7R,c3,c1,c2
-	STD       c3,64(r_ptr)
-	COPY      %r0,c3
-
-	MUL_ADD_C a2L,a2R,b7L,b7R,c1,c2,c3
-	MUL_ADD_C a3L,a3R,b6L,b6R,c1,c2,c3
-	MUL_ADD_C a4L,a4R,b5L,b5R,c1,c2,c3
-	MUL_ADD_C a5L,a5R,b4L,b4R,c1,c2,c3
-	MUL_ADD_C a6L,a6R,b3L,b3R,c1,c2,c3
-	MUL_ADD_C a7L,a7R,b2L,b2R,c1,c2,c3
-	STD       c1,72(r_ptr)
-	COPY      %r0,c1
-
-	MUL_ADD_C a7L,a7R,b3L,b3R,c2,c3,c1
-	MUL_ADD_C a6L,a6R,b4L,b4R,c2,c3,c1
-	MUL_ADD_C a5L,a5R,b5L,b5R,c2,c3,c1
-	MUL_ADD_C a4L,a4R,b6L,b6R,c2,c3,c1
-	MUL_ADD_C a3L,a3R,b7L,b7R,c2,c3,c1
-	STD       c2,80(r_ptr)
-	COPY      %r0,c2
-
-	MUL_ADD_C a4L,a4R,b7L,b7R,c3,c1,c2
-	MUL_ADD_C a5L,a5R,b6L,b6R,c3,c1,c2
-	MUL_ADD_C a6L,a6R,b5L,b5R,c3,c1,c2
-	MUL_ADD_C a7L,a7R,b4L,b4R,c3,c1,c2
-	STD       c3,88(r_ptr)
-	COPY      %r0,c3
-
-	MUL_ADD_C a7L,a7R,b5L,b5R,c1,c2,c3
-	MUL_ADD_C a6L,a6R,b6L,b6R,c1,c2,c3
-	MUL_ADD_C a5L,a5R,b7L,b7R,c1,c2,c3
-	STD       c1,96(r_ptr)
-	COPY      %r0,c1
-
-	MUL_ADD_C a6L,a6R,b7L,b7R,c2,c3,c1
-	MUL_ADD_C a7L,a7R,b6L,b6R,c2,c3,c1
-	STD       c2,104(r_ptr)
-	COPY      %r0,c2
-
-	MUL_ADD_C a7L,a7R,b7L,b7R,c3,c1,c2
-	STD       c3,112(r_ptr)
-	STD       c1,120(r_ptr)
-
-    .EXIT
-    FLDD    -88(%sp),%fr13 
-    FLDD    -96(%sp),%fr12 
-    LDD     -104(%sp),%r6        ; restore r6
-    LDD     -112(%sp),%r5        ; restore r5
-    LDD     -120(%sp),%r4        ; restore r4
-    BVE     (%rp)
-    LDD,MB  -128(%sp),%r3
-
-	.PROCEND	
-
-;-----------------------------------------------------------------------------
-;
-;void bn_mul_comba4(BN_ULONG *r, BN_ULONG *a, BN_ULONG *b)
-; arg0 = r_ptr
-; arg1 = a_ptr
-; arg2 = b_ptr
-;
-
-bn_mul_comba4
-	.proc
-	.callinfo FRAME=128,ENTRY_GR=%r3,ARGS_SAVED,ORDERING_AWARE
-	.EXPORT	bn_mul_comba4,ENTRY,PRIV_LEV=3,NO_RELOCATION,LONG_RETURN
-    .entry
-	.align 64
-
-    STD     %r3,0(%sp)          ; save r3
-    STD     %r4,8(%sp)          ; save r4
-    STD     %r5,16(%sp)         ; save r5
-    STD     %r6,24(%sp)         ; save r6
-    FSTD    %fr12,32(%sp)       ; save r6
-    FSTD    %fr13,40(%sp)       ; save r7
-
-	;
-	; Zero out carries
-	;
-	COPY     %r0,c1
-	COPY     %r0,c2
-	COPY     %r0,c3
-
-	LDO      128(%sp),%sp       ; bump stack
-    DEPDI,Z  1,31,1,high_one     ; Create Value  1 << 32
-
-	;
-	; Load up all of the values we are going to use
-	;
-    FLDD      0(a_ptr),a0       
-    FLDD      8(a_ptr),a1       
-    FLDD     16(a_ptr),a2       
-    FLDD     24(a_ptr),a3       
-
-    FLDD      0(b_ptr),b0       
-    FLDD      8(b_ptr),b1       
-    FLDD     16(b_ptr),b2       
-    FLDD     24(b_ptr),b3       
-
-	MUL_ADD_C a0L,a0R,b0L,b0R,c1,c2,c3
-	STD       c1,0(r_ptr)
-	COPY      %r0,c1
-
-	MUL_ADD_C a0L,a0R,b1L,b1R,c2,c3,c1
-	MUL_ADD_C a1L,a1R,b0L,b0R,c2,c3,c1
-	STD       c2,8(r_ptr)
-	COPY      %r0,c2
-
-	MUL_ADD_C a2L,a2R,b0L,b0R,c3,c1,c2
-	MUL_ADD_C a1L,a1R,b1L,b1R,c3,c1,c2
-	MUL_ADD_C a0L,a0R,b2L,b2R,c3,c1,c2
-	STD       c3,16(r_ptr)
-	COPY      %r0,c3
-
-	MUL_ADD_C a0L,a0R,b3L,b3R,c1,c2,c3
-	MUL_ADD_C a1L,a1R,b2L,b2R,c1,c2,c3
-	MUL_ADD_C a2L,a2R,b1L,b1R,c1,c2,c3
-	MUL_ADD_C a3L,a3R,b0L,b0R,c1,c2,c3
-	STD       c1,24(r_ptr)
-	COPY      %r0,c1
-
-	MUL_ADD_C a3L,a3R,b1L,b1R,c2,c3,c1
-	MUL_ADD_C a2L,a2R,b2L,b2R,c2,c3,c1
-	MUL_ADD_C a1L,a1R,b3L,b3R,c2,c3,c1
-	STD       c2,32(r_ptr)
-	COPY      %r0,c2
-
-	MUL_ADD_C a2L,a2R,b3L,b3R,c3,c1,c2
-	MUL_ADD_C a3L,a3R,b2L,b2R,c3,c1,c2
-	STD       c3,40(r_ptr)
-	COPY      %r0,c3
-
-	MUL_ADD_C a3L,a3R,b3L,b3R,c1,c2,c3
-	STD       c1,48(r_ptr)
-	STD       c2,56(r_ptr)
-
-    .EXIT
-    FLDD    -88(%sp),%fr13 
-    FLDD    -96(%sp),%fr12 
-    LDD     -104(%sp),%r6        ; restore r6
-    LDD     -112(%sp),%r5        ; restore r5
-    LDD     -120(%sp),%r4        ; restore r4
-    BVE     (%rp)
-    LDD,MB  -128(%sp),%r3
-
-	.PROCEND	
-
-
-;--- not PIC	.SPACE	$TEXT$
-;--- not PIC	.SUBSPA	$CODE$
-;--- not PIC	.SPACE	$PRIVATE$,SORT=16
-;--- not PIC	.IMPORT	$global$,DATA
-;--- not PIC	.SPACE	$TEXT$
-;--- not PIC	.SUBSPA	$CODE$
-;--- not PIC	.SUBSPA	$LIT$,ACCESS=0x2c
-;--- not PIC	C$7
-;--- not PIC	.ALIGN	8
-;--- not PIC	.STRINGZ	"Division would overflow (%d)\n"
-	.END
diff --git a/crypto/openssl/crypto/bn/asm/pa-risc2W.s b/crypto/openssl/crypto/bn/asm/pa-risc2W.s
deleted file mode 100644
index a99545754d18..000000000000
--- a/crypto/openssl/crypto/bn/asm/pa-risc2W.s
+++ /dev/null
@@ -1,1605 +0,0 @@
-;
-; PA-RISC 64-bit implementation of bn_asm code
-;
-; This code is approximately 2x faster than the C version
-; for RSA/DSA.
-;
-; See http://devresource.hp.com/  for more details on the PA-RISC
-; architecture.  Also see the book "PA-RISC 2.0 Architecture"
-; by Gerry Kane for information on the instruction set architecture.
-;
-; Code written by Chris Ruemmler (with some help from the HP C
-; compiler).
-;
-; The code compiles with HP's assembler
-;
-
-	.level	2.0W
-	.space	$TEXT$
-	.subspa	$CODE$,QUAD=0,ALIGN=8,ACCESS=0x2c,CODE_ONLY
-
-;
-; Global Register definitions used for the routines.
-;
-; Some information about HP's runtime architecture for 64-bits.
-;
-; "Caller save" means the calling function must save the register
-; if it wants the register to be preserved.
-; "Callee save" means if a function uses the register, it must save
-; the value before using it.
-;
-; For the floating point registers 
-;
-;    "caller save" registers: fr4-fr11, fr22-fr31
-;    "callee save" registers: fr12-fr21
-;    "special" registers: fr0-fr3 (status and exception registers)
-;
-; For the integer registers
-;     value zero             :  r0
-;     "caller save" registers: r1,r19-r26
-;     "callee save" registers: r3-r18
-;     return register        :  r2  (rp)
-;     return values          ; r28  (ret0,ret1)
-;     Stack pointer          ; r30  (sp) 
-;     global data pointer    ; r27  (dp)
-;     argument pointer       ; r29  (ap)
-;     millicode return ptr   ; r31  (also a caller save register)
-
-
-;
-; Arguments to the routines
-;
-r_ptr       .reg %r26
-a_ptr       .reg %r25
-b_ptr       .reg %r24
-num         .reg %r24
-w           .reg %r23
-n           .reg %r23
-
-
-;
-; Globals used in some routines
-;
-
-top_overflow .reg %r29
-high_mask    .reg %r22    ; value 0xffffffff80000000L
-
-
-;------------------------------------------------------------------------------
-;
-; bn_mul_add_words
-;
-;BN_ULONG bn_mul_add_words(BN_ULONG *r_ptr, BN_ULONG *a_ptr, 
-;								int num, BN_ULONG w)
-;
-; arg0 = r_ptr
-; arg1 = a_ptr
-; arg2 = num
-; arg3 = w
-;
-; Local register definitions
-;
-
-fm1          .reg %fr22
-fm           .reg %fr23
-ht_temp      .reg %fr24
-ht_temp_1    .reg %fr25
-lt_temp      .reg %fr26
-lt_temp_1    .reg %fr27
-fm1_1        .reg %fr28
-fm_1         .reg %fr29
-
-fw_h         .reg %fr7L
-fw_l         .reg %fr7R
-fw           .reg %fr7
-
-fht_0        .reg %fr8L
-flt_0        .reg %fr8R
-t_float_0    .reg %fr8
-
-fht_1        .reg %fr9L
-flt_1        .reg %fr9R
-t_float_1    .reg %fr9
-
-tmp_0        .reg %r31
-tmp_1        .reg %r21
-m_0          .reg %r20 
-m_1          .reg %r19 
-ht_0         .reg %r1  
-ht_1         .reg %r3
-lt_0         .reg %r4
-lt_1         .reg %r5
-m1_0         .reg %r6 
-m1_1         .reg %r7 
-rp_val       .reg %r8
-rp_val_1     .reg %r9
-
-bn_mul_add_words
-	.export	bn_mul_add_words,entry,NO_RELOCATION,LONG_RETURN
-	.proc
-	.callinfo frame=128
-    .entry
-	.align 64
-
-    STD     %r3,0(%sp)          ; save r3  
-    STD     %r4,8(%sp)          ; save r4  
-	NOP                         ; Needed to make the loop 16-byte aligned
-	NOP                         ; Needed to make the loop 16-byte aligned
-
-    STD     %r5,16(%sp)         ; save r5  
-    STD     %r6,24(%sp)         ; save r6  
-    STD     %r7,32(%sp)         ; save r7  
-    STD     %r8,40(%sp)         ; save r8  
-
-    STD     %r9,48(%sp)         ; save r9  
-    COPY    %r0,%ret0           ; return 0 by default
-    DEPDI,Z 1,31,1,top_overflow ; top_overflow = 1 << 32    
-	STD     w,56(%sp)           ; store w on stack
-
-    CMPIB,>= 0,num,bn_mul_add_words_exit  ; if (num <= 0) then exit
-	LDO     128(%sp),%sp       ; bump stack
-
-	;
-	; The loop is unrolled twice, so if there is only 1 number
-    ; then go straight to the cleanup code.
-	;
-	CMPIB,= 1,num,bn_mul_add_words_single_top
-	FLDD    -72(%sp),fw     ; load up w into fp register fw (fw_h/fw_l)
-
-	;
-	; This loop is unrolled 2 times (64-byte aligned as well)
-	;
-	; PA-RISC 2.0 chips have two fully pipelined multipliers, thus
-    ; two 32-bit mutiplies can be issued per cycle.
-    ; 
-bn_mul_add_words_unroll2
-
-    FLDD    0(a_ptr),t_float_0       ; load up 64-bit value (fr8L) ht(L)/lt(R)
-    FLDD    8(a_ptr),t_float_1       ; load up 64-bit value (fr8L) ht(L)/lt(R)
-    LDD     0(r_ptr),rp_val          ; rp[0]
-    LDD     8(r_ptr),rp_val_1        ; rp[1]
-
-    XMPYU   fht_0,fw_l,fm1           ; m1[0] = fht_0*fw_l
-    XMPYU   fht_1,fw_l,fm1_1         ; m1[1] = fht_1*fw_l
-    FSTD    fm1,-16(%sp)             ; -16(sp) = m1[0]
-    FSTD    fm1_1,-48(%sp)           ; -48(sp) = m1[1]
-
-    XMPYU   flt_0,fw_h,fm            ; m[0] = flt_0*fw_h
-    XMPYU   flt_1,fw_h,fm_1          ; m[1] = flt_1*fw_h
-    FSTD    fm,-8(%sp)               ; -8(sp) = m[0]
-    FSTD    fm_1,-40(%sp)            ; -40(sp) = m[1]
-
-    XMPYU   fht_0,fw_h,ht_temp       ; ht_temp   = fht_0*fw_h
-    XMPYU   fht_1,fw_h,ht_temp_1     ; ht_temp_1 = fht_1*fw_h
-    FSTD    ht_temp,-24(%sp)         ; -24(sp)   = ht_temp
-    FSTD    ht_temp_1,-56(%sp)       ; -56(sp)   = ht_temp_1
-
-    XMPYU   flt_0,fw_l,lt_temp       ; lt_temp = lt*fw_l
-    XMPYU   flt_1,fw_l,lt_temp_1     ; lt_temp = lt*fw_l
-    FSTD    lt_temp,-32(%sp)         ; -32(sp) = lt_temp 
-    FSTD    lt_temp_1,-64(%sp)       ; -64(sp) = lt_temp_1 
-
-    LDD     -8(%sp),m_0              ; m[0] 
-    LDD     -40(%sp),m_1             ; m[1]
-    LDD     -16(%sp),m1_0            ; m1[0]
-    LDD     -48(%sp),m1_1            ; m1[1]
-
-    LDD     -24(%sp),ht_0            ; ht[0]
-    LDD     -56(%sp),ht_1            ; ht[1]
-    ADD,L   m1_0,m_0,tmp_0           ; tmp_0 = m[0] + m1[0]; 
-    ADD,L   m1_1,m_1,tmp_1           ; tmp_1 = m[1] + m1[1]; 
-
-    LDD     -32(%sp),lt_0            
-    LDD     -64(%sp),lt_1            
-    CMPCLR,*>>= tmp_0,m1_0, %r0      ; if (m[0] < m1[0])
-    ADD,L   ht_0,top_overflow,ht_0   ; ht[0] += (1<<32)
-
-    CMPCLR,*>>= tmp_1,m1_1,%r0       ; if (m[1] < m1[1])
-    ADD,L   ht_1,top_overflow,ht_1   ; ht[1] += (1<<32)
-    EXTRD,U tmp_0,31,32,m_0          ; m[0]>>32  
-    DEPD,Z  tmp_0,31,32,m1_0         ; m1[0] = m[0]<<32 
-
-    EXTRD,U tmp_1,31,32,m_1          ; m[1]>>32  
-    DEPD,Z  tmp_1,31,32,m1_1         ; m1[1] = m[1]<<32 
-    ADD,L   ht_0,m_0,ht_0            ; ht[0]+= (m[0]>>32)
-    ADD,L   ht_1,m_1,ht_1            ; ht[1]+= (m[1]>>32)
-
-    ADD     lt_0,m1_0,lt_0           ; lt[0] = lt[0]+m1[0];
-	ADD,DC  ht_0,%r0,ht_0            ; ht[0]++
-    ADD     lt_1,m1_1,lt_1           ; lt[1] = lt[1]+m1[1];
-    ADD,DC  ht_1,%r0,ht_1            ; ht[1]++
-
-    ADD    %ret0,lt_0,lt_0           ; lt[0] = lt[0] + c;
-	ADD,DC  ht_0,%r0,ht_0            ; ht[0]++
-    ADD     lt_0,rp_val,lt_0         ; lt[0] = lt[0]+rp[0]
-    ADD,DC  ht_0,%r0,ht_0            ; ht[0]++
-
-	LDO    -2(num),num               ; num = num - 2;
-    ADD     ht_0,lt_1,lt_1           ; lt[1] = lt[1] + ht_0 (c);
-    ADD,DC  ht_1,%r0,ht_1            ; ht[1]++
-    STD     lt_0,0(r_ptr)            ; rp[0] = lt[0]
-
-    ADD     lt_1,rp_val_1,lt_1       ; lt[1] = lt[1]+rp[1]
-    ADD,DC  ht_1,%r0,%ret0           ; ht[1]++
-    LDO     16(a_ptr),a_ptr          ; a_ptr += 2
-
-    STD     lt_1,8(r_ptr)            ; rp[1] = lt[1]
-	CMPIB,<= 2,num,bn_mul_add_words_unroll2 ; go again if more to do
-    LDO     16(r_ptr),r_ptr          ; r_ptr += 2
-
-    CMPIB,=,N 0,num,bn_mul_add_words_exit ; are we done, or cleanup last one
-
-	;
-	; Top of loop aligned on 64-byte boundary
-	;
-bn_mul_add_words_single_top
-    FLDD    0(a_ptr),t_float_0        ; load up 64-bit value (fr8L) ht(L)/lt(R)
-    LDD     0(r_ptr),rp_val           ; rp[0]
-    LDO     8(a_ptr),a_ptr            ; a_ptr++
-    XMPYU   fht_0,fw_l,fm1            ; m1 = ht*fw_l
-    FSTD    fm1,-16(%sp)              ; -16(sp) = m1
-    XMPYU   flt_0,fw_h,fm             ; m = lt*fw_h
-    FSTD    fm,-8(%sp)                ; -8(sp) = m
-    XMPYU   fht_0,fw_h,ht_temp        ; ht_temp = ht*fw_h
-    FSTD    ht_temp,-24(%sp)          ; -24(sp) = ht
-    XMPYU   flt_0,fw_l,lt_temp        ; lt_temp = lt*fw_l
-    FSTD    lt_temp,-32(%sp)          ; -32(sp) = lt 
-
-    LDD     -8(%sp),m_0               
-    LDD    -16(%sp),m1_0              ; m1 = temp1 
-    ADD,L   m_0,m1_0,tmp_0            ; tmp_0 = m + m1; 
-    LDD     -24(%sp),ht_0             
-    LDD     -32(%sp),lt_0             
-
-    CMPCLR,*>>= tmp_0,m1_0,%r0        ; if (m < m1)
-    ADD,L   ht_0,top_overflow,ht_0    ; ht += (1<<32)
-
-    EXTRD,U tmp_0,31,32,m_0           ; m>>32  
-    DEPD,Z  tmp_0,31,32,m1_0          ; m1 = m<<32 
-
-    ADD,L   ht_0,m_0,ht_0             ; ht+= (m>>32)
-    ADD     lt_0,m1_0,tmp_0           ; tmp_0 = lt+m1;
-    ADD,DC  ht_0,%r0,ht_0             ; ht++
-    ADD     %ret0,tmp_0,lt_0          ; lt = lt + c;
-    ADD,DC  ht_0,%r0,ht_0             ; ht++
-    ADD     lt_0,rp_val,lt_0          ; lt = lt+rp[0]
-    ADD,DC  ht_0,%r0,%ret0            ; ht++
-    STD     lt_0,0(r_ptr)             ; rp[0] = lt
-
-bn_mul_add_words_exit
-    .EXIT
-    LDD     -80(%sp),%r9              ; restore r9  
-    LDD     -88(%sp),%r8              ; restore r8  
-    LDD     -96(%sp),%r7              ; restore r7  
-    LDD     -104(%sp),%r6             ; restore r6  
-    LDD     -112(%sp),%r5             ; restore r5  
-    LDD     -120(%sp),%r4             ; restore r4  
-    BVE     (%rp)
-    LDD,MB  -128(%sp),%r3             ; restore r3
-	.PROCEND	;in=23,24,25,26,29;out=28;
-
-;----------------------------------------------------------------------------
-;
-;BN_ULONG bn_mul_words(BN_ULONG *rp, BN_ULONG *ap, int num, BN_ULONG w)
-;
-; arg0 = rp
-; arg1 = ap
-; arg2 = num
-; arg3 = w
-
-bn_mul_words
-	.proc
-	.callinfo frame=128
-    .entry
-	.EXPORT	bn_mul_words,ENTRY,PRIV_LEV=3,NO_RELOCATION,LONG_RETURN
-	.align 64
-
-    STD     %r3,0(%sp)          ; save r3  
-    STD     %r4,8(%sp)          ; save r4  
-    STD     %r5,16(%sp)         ; save r5  
-    STD     %r6,24(%sp)         ; save r6  
-
-    STD     %r7,32(%sp)         ; save r7  
-    COPY    %r0,%ret0           ; return 0 by default
-    DEPDI,Z 1,31,1,top_overflow ; top_overflow = 1 << 32    
-	STD     w,56(%sp)           ; w on stack
-
-    CMPIB,>= 0,num,bn_mul_words_exit
-	LDO     128(%sp),%sp       ; bump stack
-
-	;
-	; See if only 1 word to do, thus just do cleanup
-	;
-	CMPIB,= 1,num,bn_mul_words_single_top
-	FLDD    -72(%sp),fw     ; load up w into fp register fw (fw_h/fw_l)
-
-	;
-	; This loop is unrolled 2 times (64-byte aligned as well)
-	;
-	; PA-RISC 2.0 chips have two fully pipelined multipliers, thus
-    ; two 32-bit mutiplies can be issued per cycle.
-    ; 
-bn_mul_words_unroll2
-
-    FLDD    0(a_ptr),t_float_0        ; load up 64-bit value (fr8L) ht(L)/lt(R)
-    FLDD    8(a_ptr),t_float_1        ; load up 64-bit value (fr8L) ht(L)/lt(R)
-    XMPYU   fht_0,fw_l,fm1            ; m1[0] = fht_0*fw_l
-    XMPYU   fht_1,fw_l,fm1_1          ; m1[1] = ht*fw_l
-
-    FSTD    fm1,-16(%sp)              ; -16(sp) = m1
-    FSTD    fm1_1,-48(%sp)            ; -48(sp) = m1
-    XMPYU   flt_0,fw_h,fm             ; m = lt*fw_h
-    XMPYU   flt_1,fw_h,fm_1           ; m = lt*fw_h
-
-    FSTD    fm,-8(%sp)                ; -8(sp) = m
-    FSTD    fm_1,-40(%sp)             ; -40(sp) = m
-    XMPYU   fht_0,fw_h,ht_temp        ; ht_temp = fht_0*fw_h
-    XMPYU   fht_1,fw_h,ht_temp_1      ; ht_temp = ht*fw_h
-
-    FSTD    ht_temp,-24(%sp)          ; -24(sp) = ht
-    FSTD    ht_temp_1,-56(%sp)        ; -56(sp) = ht
-    XMPYU   flt_0,fw_l,lt_temp        ; lt_temp = lt*fw_l
-    XMPYU   flt_1,fw_l,lt_temp_1      ; lt_temp = lt*fw_l
-
-    FSTD    lt_temp,-32(%sp)          ; -32(sp) = lt 
-    FSTD    lt_temp_1,-64(%sp)        ; -64(sp) = lt 
-    LDD     -8(%sp),m_0               
-    LDD     -40(%sp),m_1              
-
-    LDD    -16(%sp),m1_0              
-    LDD    -48(%sp),m1_1              
-    LDD     -24(%sp),ht_0             
-    LDD     -56(%sp),ht_1             
-
-    ADD,L   m1_0,m_0,tmp_0            ; tmp_0 = m + m1; 
-    ADD,L   m1_1,m_1,tmp_1            ; tmp_1 = m + m1; 
-    LDD     -32(%sp),lt_0             
-    LDD     -64(%sp),lt_1             
-
-    CMPCLR,*>>= tmp_0,m1_0, %r0       ; if (m < m1)
-    ADD,L   ht_0,top_overflow,ht_0    ; ht += (1<<32)
-    CMPCLR,*>>= tmp_1,m1_1,%r0        ; if (m < m1)
-    ADD,L   ht_1,top_overflow,ht_1    ; ht += (1<<32)
-
-    EXTRD,U tmp_0,31,32,m_0           ; m>>32  
-    DEPD,Z  tmp_0,31,32,m1_0          ; m1 = m<<32 
-    EXTRD,U tmp_1,31,32,m_1           ; m>>32  
-    DEPD,Z  tmp_1,31,32,m1_1          ; m1 = m<<32 
-
-    ADD,L   ht_0,m_0,ht_0             ; ht+= (m>>32)
-    ADD,L   ht_1,m_1,ht_1             ; ht+= (m>>32)
-    ADD     lt_0,m1_0,lt_0            ; lt = lt+m1;
-	ADD,DC  ht_0,%r0,ht_0             ; ht++
-
-    ADD     lt_1,m1_1,lt_1            ; lt = lt+m1;
-    ADD,DC  ht_1,%r0,ht_1             ; ht++
-    ADD    %ret0,lt_0,lt_0            ; lt = lt + c (ret0);
-	ADD,DC  ht_0,%r0,ht_0             ; ht++
-
-    ADD     ht_0,lt_1,lt_1            ; lt = lt + c (ht_0)
-    ADD,DC  ht_1,%r0,ht_1             ; ht++
-    STD     lt_0,0(r_ptr)             ; rp[0] = lt
-    STD     lt_1,8(r_ptr)             ; rp[1] = lt
-
-	COPY    ht_1,%ret0                ; carry = ht
-	LDO    -2(num),num                ; num = num - 2;
-    LDO     16(a_ptr),a_ptr           ; ap += 2
-	CMPIB,<= 2,num,bn_mul_words_unroll2
-    LDO     16(r_ptr),r_ptr           ; rp++
-
-    CMPIB,=,N 0,num,bn_mul_words_exit ; are we done?
-
-	;
-	; Top of loop aligned on 64-byte boundary
-	;
-bn_mul_words_single_top
-    FLDD    0(a_ptr),t_float_0        ; load up 64-bit value (fr8L) ht(L)/lt(R)
-
-    XMPYU   fht_0,fw_l,fm1            ; m1 = ht*fw_l
-    FSTD    fm1,-16(%sp)              ; -16(sp) = m1
-    XMPYU   flt_0,fw_h,fm             ; m = lt*fw_h
-    FSTD    fm,-8(%sp)                ; -8(sp) = m
-    XMPYU   fht_0,fw_h,ht_temp        ; ht_temp = ht*fw_h
-    FSTD    ht_temp,-24(%sp)          ; -24(sp) = ht
-    XMPYU   flt_0,fw_l,lt_temp        ; lt_temp = lt*fw_l
-    FSTD    lt_temp,-32(%sp)          ; -32(sp) = lt 
-
-    LDD     -8(%sp),m_0               
-    LDD    -16(%sp),m1_0              
-    ADD,L   m_0,m1_0,tmp_0            ; tmp_0 = m + m1; 
-    LDD     -24(%sp),ht_0             
-    LDD     -32(%sp),lt_0             
-
-    CMPCLR,*>>= tmp_0,m1_0,%r0        ; if (m < m1)
-    ADD,L   ht_0,top_overflow,ht_0    ; ht += (1<<32)
-
-    EXTRD,U tmp_0,31,32,m_0           ; m>>32  
-    DEPD,Z  tmp_0,31,32,m1_0          ; m1 = m<<32 
-
-    ADD,L   ht_0,m_0,ht_0             ; ht+= (m>>32)
-    ADD     lt_0,m1_0,lt_0            ; lt= lt+m1;
-    ADD,DC  ht_0,%r0,ht_0             ; ht++
-
-    ADD     %ret0,lt_0,lt_0           ; lt = lt + c;
-    ADD,DC  ht_0,%r0,ht_0             ; ht++
-
-    COPY    ht_0,%ret0                ; copy carry
-    STD     lt_0,0(r_ptr)             ; rp[0] = lt
-
-bn_mul_words_exit
-    .EXIT
-    LDD     -96(%sp),%r7              ; restore r7  
-    LDD     -104(%sp),%r6             ; restore r6  
-    LDD     -112(%sp),%r5             ; restore r5  
-    LDD     -120(%sp),%r4             ; restore r4  
-    BVE     (%rp)
-    LDD,MB  -128(%sp),%r3             ; restore r3
-	.PROCEND	;in=23,24,25,26,29;out=28;
-
-;----------------------------------------------------------------------------
-;
-;void bn_sqr_words(BN_ULONG *rp, BN_ULONG *ap, int num)
-;
-; arg0 = rp
-; arg1 = ap
-; arg2 = num
-;
-
-bn_sqr_words
-	.proc
-	.callinfo FRAME=128,ENTRY_GR=%r3,ARGS_SAVED,ORDERING_AWARE
-	.EXPORT	bn_sqr_words,ENTRY,PRIV_LEV=3,NO_RELOCATION,LONG_RETURN
-    .entry
-	.align 64
-
-    STD     %r3,0(%sp)          ; save r3  
-    STD     %r4,8(%sp)          ; save r4  
-	NOP
-    STD     %r5,16(%sp)         ; save r5  
-
-    CMPIB,>= 0,num,bn_sqr_words_exit
-	LDO     128(%sp),%sp       ; bump stack
-
-	;
-	; If only 1, the goto straight to cleanup
-	;
-	CMPIB,= 1,num,bn_sqr_words_single_top
-    DEPDI,Z -1,32,33,high_mask   ; Create Mask 0xffffffff80000000L
-
-	;
-	; This loop is unrolled 2 times (64-byte aligned as well)
-	;
-
-bn_sqr_words_unroll2
-    FLDD    0(a_ptr),t_float_0        ; a[0]
-    FLDD    8(a_ptr),t_float_1        ; a[1]
-    XMPYU   fht_0,flt_0,fm            ; m[0]
-    XMPYU   fht_1,flt_1,fm_1          ; m[1]
-
-    FSTD    fm,-24(%sp)               ; store m[0]
-    FSTD    fm_1,-56(%sp)             ; store m[1]
-    XMPYU   flt_0,flt_0,lt_temp       ; lt[0]
-    XMPYU   flt_1,flt_1,lt_temp_1     ; lt[1]
-
-    FSTD    lt_temp,-16(%sp)          ; store lt[0]
-    FSTD    lt_temp_1,-48(%sp)        ; store lt[1]
-    XMPYU   fht_0,fht_0,ht_temp       ; ht[0]
-    XMPYU   fht_1,fht_1,ht_temp_1     ; ht[1]
-
-    FSTD    ht_temp,-8(%sp)           ; store ht[0]
-    FSTD    ht_temp_1,-40(%sp)        ; store ht[1]
-    LDD     -24(%sp),m_0             
-    LDD     -56(%sp),m_1              
-
-    AND     m_0,high_mask,tmp_0       ; m[0] & Mask
-    AND     m_1,high_mask,tmp_1       ; m[1] & Mask
-    DEPD,Z  m_0,30,31,m_0             ; m[0] << 32+1
-    DEPD,Z  m_1,30,31,m_1             ; m[1] << 32+1
-
-    LDD     -16(%sp),lt_0        
-    LDD     -48(%sp),lt_1        
-    EXTRD,U tmp_0,32,33,tmp_0         ; tmp_0 = m[0]&Mask >> 32-1
-    EXTRD,U tmp_1,32,33,tmp_1         ; tmp_1 = m[1]&Mask >> 32-1
-
-    LDD     -8(%sp),ht_0            
-    LDD     -40(%sp),ht_1           
-    ADD,L   ht_0,tmp_0,ht_0           ; ht[0] += tmp_0
-    ADD,L   ht_1,tmp_1,ht_1           ; ht[1] += tmp_1
-
-    ADD     lt_0,m_0,lt_0             ; lt = lt+m
-    ADD,DC  ht_0,%r0,ht_0             ; ht[0]++
-    STD     lt_0,0(r_ptr)             ; rp[0] = lt[0]
-    STD     ht_0,8(r_ptr)             ; rp[1] = ht[1]
-
-    ADD     lt_1,m_1,lt_1             ; lt = lt+m
-    ADD,DC  ht_1,%r0,ht_1             ; ht[1]++
-    STD     lt_1,16(r_ptr)            ; rp[2] = lt[1]
-    STD     ht_1,24(r_ptr)            ; rp[3] = ht[1]
-
-	LDO    -2(num),num                ; num = num - 2;
-    LDO     16(a_ptr),a_ptr           ; ap += 2
-	CMPIB,<= 2,num,bn_sqr_words_unroll2
-    LDO     32(r_ptr),r_ptr           ; rp += 4
-
-    CMPIB,=,N 0,num,bn_sqr_words_exit ; are we done?
-
-	;
-	; Top of loop aligned on 64-byte boundary
-	;
-bn_sqr_words_single_top
-    FLDD    0(a_ptr),t_float_0        ; load up 64-bit value (fr8L) ht(L)/lt(R)
-
-    XMPYU   fht_0,flt_0,fm            ; m
-    FSTD    fm,-24(%sp)               ; store m
-
-    XMPYU   flt_0,flt_0,lt_temp       ; lt
-    FSTD    lt_temp,-16(%sp)          ; store lt
-
-    XMPYU   fht_0,fht_0,ht_temp       ; ht
-    FSTD    ht_temp,-8(%sp)           ; store ht
-
-    LDD     -24(%sp),m_0              ; load m
-    AND     m_0,high_mask,tmp_0       ; m & Mask
-    DEPD,Z  m_0,30,31,m_0             ; m << 32+1
-    LDD     -16(%sp),lt_0             ; lt
-
-    LDD     -8(%sp),ht_0              ; ht
-    EXTRD,U tmp_0,32,33,tmp_0         ; tmp_0 = m&Mask >> 32-1
-    ADD     m_0,lt_0,lt_0             ; lt = lt+m
-    ADD,L   ht_0,tmp_0,ht_0           ; ht += tmp_0
-    ADD,DC  ht_0,%r0,ht_0             ; ht++
-
-    STD     lt_0,0(r_ptr)             ; rp[0] = lt
-    STD     ht_0,8(r_ptr)             ; rp[1] = ht
-
-bn_sqr_words_exit
-    .EXIT
-    LDD     -112(%sp),%r5       ; restore r5  
-    LDD     -120(%sp),%r4       ; restore r4  
-    BVE     (%rp)
-    LDD,MB  -128(%sp),%r3 
-	.PROCEND	;in=23,24,25,26,29;out=28;
-
-
-;----------------------------------------------------------------------------
-;
-;BN_ULONG bn_add_words(BN_ULONG *r, BN_ULONG *a, BN_ULONG *b, int n)
-;
-; arg0 = rp 
-; arg1 = ap
-; arg2 = bp 
-; arg3 = n
-
-t  .reg %r22
-b  .reg %r21
-l  .reg %r20
-
-bn_add_words
-	.proc
-    .entry
-	.callinfo
-	.EXPORT	bn_add_words,ENTRY,PRIV_LEV=3,NO_RELOCATION,LONG_RETURN
-	.align 64
-
-    CMPIB,>= 0,n,bn_add_words_exit
-    COPY    %r0,%ret0           ; return 0 by default
-
-	;
-	; If 2 or more numbers do the loop
-	;
-	CMPIB,= 1,n,bn_add_words_single_top
-	NOP
-
-	;
-	; This loop is unrolled 2 times (64-byte aligned as well)
-	;
-bn_add_words_unroll2
-	LDD     0(a_ptr),t
-	LDD     0(b_ptr),b
-	ADD     t,%ret0,t                    ; t = t+c;
-	ADD,DC  %r0,%r0,%ret0                ; set c to carry
-	ADD     t,b,l                        ; l = t + b[0]
-	ADD,DC  %ret0,%r0,%ret0              ; c+= carry
-	STD     l,0(r_ptr)
-
-	LDD     8(a_ptr),t
-	LDD     8(b_ptr),b
-	ADD     t,%ret0,t                     ; t = t+c;
-	ADD,DC  %r0,%r0,%ret0                 ; set c to carry
-	ADD     t,b,l                         ; l = t + b[0]
-	ADD,DC  %ret0,%r0,%ret0               ; c+= carry
-	STD     l,8(r_ptr)
-
-	LDO     -2(n),n
-	LDO     16(a_ptr),a_ptr
-	LDO     16(b_ptr),b_ptr
-
-	CMPIB,<= 2,n,bn_add_words_unroll2
-	LDO     16(r_ptr),r_ptr
-
-    CMPIB,=,N 0,n,bn_add_words_exit ; are we done?
-
-bn_add_words_single_top
-	LDD     0(a_ptr),t
-	LDD     0(b_ptr),b
-
-	ADD     t,%ret0,t                 ; t = t+c;
-	ADD,DC  %r0,%r0,%ret0             ; set c to carry (could use CMPCLR??)
-	ADD     t,b,l                     ; l = t + b[0]
-	ADD,DC  %ret0,%r0,%ret0           ; c+= carry
-	STD     l,0(r_ptr)
-
-bn_add_words_exit
-    .EXIT
-    BVE     (%rp)
-	NOP
-	.PROCEND	;in=23,24,25,26,29;out=28;
-
-;----------------------------------------------------------------------------
-;
-;BN_ULONG bn_sub_words(BN_ULONG *r, BN_ULONG *a, BN_ULONG *b, int n)
-;
-; arg0 = rp 
-; arg1 = ap
-; arg2 = bp 
-; arg3 = n
-
-t1       .reg %r22
-t2       .reg %r21
-sub_tmp1 .reg %r20
-sub_tmp2 .reg %r19
-
-
-bn_sub_words
-	.proc
-	.callinfo 
-	.EXPORT	bn_sub_words,ENTRY,PRIV_LEV=3,NO_RELOCATION,LONG_RETURN
-    .entry
-	.align 64
-
-    CMPIB,>=  0,n,bn_sub_words_exit
-    COPY    %r0,%ret0           ; return 0 by default
-
-	;
-	; If 2 or more numbers do the loop
-	;
-	CMPIB,= 1,n,bn_sub_words_single_top
-	NOP
-
-	;
-	; This loop is unrolled 2 times (64-byte aligned as well)
-	;
-bn_sub_words_unroll2
-	LDD     0(a_ptr),t1
-	LDD     0(b_ptr),t2
-	SUB     t1,t2,sub_tmp1           ; t3 = t1-t2; 
-	SUB     sub_tmp1,%ret0,sub_tmp1  ; t3 = t3- c; 
-
-	CMPCLR,*>> t1,t2,sub_tmp2        ; clear if t1 > t2
-	LDO      1(%r0),sub_tmp2
-	
-	CMPCLR,*= t1,t2,%r0
-	COPY    sub_tmp2,%ret0
-	STD     sub_tmp1,0(r_ptr)
-
-	LDD     8(a_ptr),t1
-	LDD     8(b_ptr),t2
-	SUB     t1,t2,sub_tmp1            ; t3 = t1-t2; 
-	SUB     sub_tmp1,%ret0,sub_tmp1   ; t3 = t3- c; 
-	CMPCLR,*>> t1,t2,sub_tmp2         ; clear if t1 > t2
-	LDO      1(%r0),sub_tmp2
-	
-	CMPCLR,*= t1,t2,%r0
-	COPY    sub_tmp2,%ret0
-	STD     sub_tmp1,8(r_ptr)
-
-	LDO     -2(n),n
-	LDO     16(a_ptr),a_ptr
-	LDO     16(b_ptr),b_ptr
-
-	CMPIB,<= 2,n,bn_sub_words_unroll2
-	LDO     16(r_ptr),r_ptr
-
-    CMPIB,=,N 0,n,bn_sub_words_exit ; are we done?
-
-bn_sub_words_single_top
-	LDD     0(a_ptr),t1
-	LDD     0(b_ptr),t2
-	SUB     t1,t2,sub_tmp1            ; t3 = t1-t2; 
-	SUB     sub_tmp1,%ret0,sub_tmp1   ; t3 = t3- c; 
-	CMPCLR,*>> t1,t2,sub_tmp2         ; clear if t1 > t2
-	LDO      1(%r0),sub_tmp2
-	
-	CMPCLR,*= t1,t2,%r0
-	COPY    sub_tmp2,%ret0
-
-	STD     sub_tmp1,0(r_ptr)
-
-bn_sub_words_exit
-    .EXIT
-    BVE     (%rp)
-	NOP
-	.PROCEND	;in=23,24,25,26,29;out=28;
-
-;------------------------------------------------------------------------------
-;
-; unsigned long bn_div_words(unsigned long h, unsigned long l, unsigned long d)
-;
-; arg0 = h
-; arg1 = l
-; arg2 = d
-;
-; This is mainly just modified assembly from the compiler, thus the
-; lack of variable names.
-;
-;------------------------------------------------------------------------------
-bn_div_words
-	.proc
-	.callinfo CALLER,FRAME=272,ENTRY_GR=%r10,SAVE_RP,ARGS_SAVED,ORDERING_AWARE
-	.EXPORT	bn_div_words,ENTRY,PRIV_LEV=3,NO_RELOCATION,LONG_RETURN
-	.IMPORT	BN_num_bits_word,CODE,NO_RELOCATION
-	.IMPORT	__iob,DATA
-	.IMPORT	fprintf,CODE,NO_RELOCATION
-	.IMPORT	abort,CODE,NO_RELOCATION
-	.IMPORT	$$div2U,MILLICODE
-    .entry
-    STD     %r2,-16(%r30)   
-    STD,MA  %r3,352(%r30)   
-    STD     %r4,-344(%r30)  
-    STD     %r5,-336(%r30)  
-    STD     %r6,-328(%r30)  
-    STD     %r7,-320(%r30)  
-    STD     %r8,-312(%r30)  
-    STD     %r9,-304(%r30)  
-    STD     %r10,-296(%r30)
-
-    STD     %r27,-288(%r30)             ; save gp
-
-    COPY    %r24,%r3           ; save d 
-    COPY    %r26,%r4           ; save h (high 64-bits)
-    LDO      -1(%r0),%ret0     ; return -1 by default	
-
-    CMPB,*=  %r0,%arg2,$D3     ; if (d == 0)
-    COPY    %r25,%r5           ; save l (low 64-bits)
-
-    LDO     -48(%r30),%r29     ; create ap 
-    .CALL   ;in=26,29;out=28;
-    B,L     BN_num_bits_word,%r2 
-    COPY    %r3,%r26        
-    LDD     -288(%r30),%r27    ; restore gp 
-    LDI     64,%r21 
-
-    CMPB,=  %r21,%ret0,$00000012   ;if (i == 64) (forward) 
-    COPY    %ret0,%r24             ; i   
-    MTSARCM %r24    
-    DEPDI,Z -1,%sar,1,%r29  
-    CMPB,*<<,N %r29,%r4,bn_div_err_case ; if (h > 1<<i) (forward) 
-
-$00000012
-    SUBI    64,%r24,%r31                       ; i = 64 - i;
-    CMPCLR,*<< %r4,%r3,%r0                     ; if (h >= d)
-    SUB     %r4,%r3,%r4                        ; h -= d
-    CMPB,=  %r31,%r0,$0000001A                 ; if (i)
-    COPY    %r0,%r10                           ; ret = 0
-    MTSARCM %r31                               ; i to shift
-    DEPD,Z  %r3,%sar,64,%r3                    ; d <<= i;
-    SUBI    64,%r31,%r19                       ; 64 - i; redundent
-    MTSAR   %r19                               ; (64 -i) to shift
-    SHRPD   %r4,%r5,%sar,%r4                   ; l>> (64-i)
-    MTSARCM %r31                               ; i to shift
-    DEPD,Z  %r5,%sar,64,%r5                    ; l <<= i;
-
-$0000001A
-    DEPDI,Z -1,31,32,%r19                      
-    EXTRD,U %r3,31,32,%r6                      ; dh=(d&0xfff)>>32
-    EXTRD,U %r3,63,32,%r8                      ; dl = d&0xffffff
-    LDO     2(%r0),%r9
-    STD    %r3,-280(%r30)                      ; "d" to stack
-
-$0000001C
-    DEPDI,Z -1,63,32,%r29                      ; 
-    EXTRD,U %r4,31,32,%r31                     ; h >> 32
-    CMPB,*=,N  %r31,%r6,$D2     	       ; if ((h>>32) != dh)(forward) div
-    COPY    %r4,%r26       
-    EXTRD,U %r4,31,32,%r25 
-    COPY    %r6,%r24      
-    .CALL   ;in=23,24,25,26;out=20,21,22,28,29; (MILLICALL)
-    B,L     $$div2U,%r2     
-    EXTRD,U %r6,31,32,%r23  
-    DEPD    %r28,31,32,%r29 
-$D2
-    STD     %r29,-272(%r30)                   ; q
-    AND     %r5,%r19,%r24                   ; t & 0xffffffff00000000;
-    EXTRD,U %r24,31,32,%r24                 ; ??? 
-    FLDD    -272(%r30),%fr7                 ; q
-    FLDD    -280(%r30),%fr8                 ; d
-    XMPYU   %fr8L,%fr7L,%fr10  
-    FSTD    %fr10,-256(%r30)   
-    XMPYU   %fr8L,%fr7R,%fr22  
-    FSTD    %fr22,-264(%r30)   
-    XMPYU   %fr8R,%fr7L,%fr11 
-    XMPYU   %fr8R,%fr7R,%fr23
-    FSTD    %fr11,-232(%r30)
-    FSTD    %fr23,-240(%r30)
-    LDD     -256(%r30),%r28
-    DEPD,Z  %r28,31,32,%r2 
-    LDD     -264(%r30),%r20
-    ADD,L   %r20,%r2,%r31   
-    LDD     -232(%r30),%r22 
-    DEPD,Z  %r22,31,32,%r22 
-    LDD     -240(%r30),%r21 
-    B       $00000024       ; enter loop  
-    ADD,L   %r21,%r22,%r23 
-
-$0000002A
-    LDO     -1(%r29),%r29   
-    SUB     %r23,%r8,%r23   
-$00000024
-    SUB     %r4,%r31,%r25   
-    AND     %r25,%r19,%r26  
-    CMPB,*<>,N      %r0,%r26,$00000046  ; (forward)
-    DEPD,Z  %r25,31,32,%r20 
-    OR      %r20,%r24,%r21  
-    CMPB,*<<,N  %r21,%r23,$0000002A ;(backward) 
-    SUB     %r31,%r6,%r31   
-;-------------Break path---------------------
-
-$00000046
-    DEPD,Z  %r23,31,32,%r25              ;tl
-    EXTRD,U %r23,31,32,%r26              ;t
-    AND     %r25,%r19,%r24               ;tl = (tl<<32)&0xfffffff0000000L
-    ADD,L   %r31,%r26,%r31               ;th += t; 
-    CMPCLR,*>>=     %r5,%r24,%r0         ;if (l<tl)
-    LDO     1(%r31),%r31                 ; th++;
-    CMPB,*<<=,N     %r31,%r4,$00000036   ;if (n < th) (forward)
-    LDO     -1(%r29),%r29                ;q--; 
-    ADD,L   %r4,%r3,%r4                  ;h += d;
-$00000036
-    ADDIB,=,N       -1,%r9,$D1 ;if (--count == 0) break (forward) 
-    SUB     %r5,%r24,%r28                ; l -= tl;
-    SUB     %r4,%r31,%r24                ; h -= th;
-    SHRPD   %r24,%r28,32,%r4             ; h = ((h<<32)|(l>>32));
-    DEPD,Z  %r29,31,32,%r10              ; ret = q<<32
-    b      $0000001C
-    DEPD,Z  %r28,31,32,%r5               ; l = l << 32 
-
-$D1
-    OR      %r10,%r29,%r28           ; ret |= q
-$D3
-    LDD     -368(%r30),%r2  
-$D0
-    LDD     -296(%r30),%r10 
-    LDD     -304(%r30),%r9  
-    LDD     -312(%r30),%r8  
-    LDD     -320(%r30),%r7  
-    LDD     -328(%r30),%r6  
-    LDD     -336(%r30),%r5  
-    LDD     -344(%r30),%r4  
-    BVE     (%r2)   
-        .EXIT
-    LDD,MB  -352(%r30),%r3 
-
-bn_div_err_case
-    MFIA    %r6     
-    ADDIL   L'bn_div_words-bn_div_err_case,%r6,%r1 
-    LDO     R'bn_div_words-bn_div_err_case(%r1),%r6  
-    ADDIL   LT'__iob,%r27,%r1       
-    LDD     RT'__iob(%r1),%r26      
-    ADDIL   L'C$4-bn_div_words,%r6,%r1    
-    LDO     R'C$4-bn_div_words(%r1),%r25  
-    LDO     64(%r26),%r26   
-    .CALL           ;in=24,25,26,29;out=28;
-    B,L     fprintf,%r2    
-    LDO     -48(%r30),%r29 
-    LDD     -288(%r30),%r27
-    .CALL           ;in=29;
-    B,L     abort,%r2      
-    LDO     -48(%r30),%r29 
-    LDD     -288(%r30),%r27
-    B       $D0         
-    LDD     -368(%r30),%r2  
-	.PROCEND	;in=24,25,26,29;out=28;
-
-;----------------------------------------------------------------------------
-;
-; Registers to hold 64-bit values to manipulate.  The "L" part
-; of the register corresponds to the upper 32-bits, while the "R"
-; part corresponds to the lower 32-bits
-; 
-; Note, that when using b6 and b7, the code must save these before
-; using them because they are callee save registers 
-; 
-;
-; Floating point registers to use to save values that
-; are manipulated.  These don't collide with ftemp1-6 and
-; are all caller save registers
-;
-a0        .reg %fr22
-a0L       .reg %fr22L
-a0R       .reg %fr22R
-
-a1        .reg %fr23
-a1L       .reg %fr23L
-a1R       .reg %fr23R
-
-a2        .reg %fr24
-a2L       .reg %fr24L
-a2R       .reg %fr24R
-
-a3        .reg %fr25
-a3L       .reg %fr25L
-a3R       .reg %fr25R
-
-a4        .reg %fr26
-a4L       .reg %fr26L
-a4R       .reg %fr26R
-
-a5        .reg %fr27
-a5L       .reg %fr27L
-a5R       .reg %fr27R
-
-a6        .reg %fr28
-a6L       .reg %fr28L
-a6R       .reg %fr28R
-
-a7        .reg %fr29
-a7L       .reg %fr29L
-a7R       .reg %fr29R
-
-b0        .reg %fr30
-b0L       .reg %fr30L
-b0R       .reg %fr30R
-
-b1        .reg %fr31
-b1L       .reg %fr31L
-b1R       .reg %fr31R
-
-;
-; Temporary floating point variables, these are all caller save
-; registers
-;
-ftemp1    .reg %fr4
-ftemp2    .reg %fr5
-ftemp3    .reg %fr6
-ftemp4    .reg %fr7
-
-;
-; The B set of registers when used.
-;
-
-b2        .reg %fr8
-b2L       .reg %fr8L
-b2R       .reg %fr8R
-
-b3        .reg %fr9
-b3L       .reg %fr9L
-b3R       .reg %fr9R
-
-b4        .reg %fr10
-b4L       .reg %fr10L
-b4R       .reg %fr10R
-
-b5        .reg %fr11
-b5L       .reg %fr11L
-b5R       .reg %fr11R
-
-b6        .reg %fr12
-b6L       .reg %fr12L
-b6R       .reg %fr12R
-
-b7        .reg %fr13
-b7L       .reg %fr13L
-b7R       .reg %fr13R
-
-c1           .reg %r21   ; only reg
-temp1        .reg %r20   ; only reg
-temp2        .reg %r19   ; only reg
-temp3        .reg %r31   ; only reg
-
-m1           .reg %r28   
-c2           .reg %r23   
-high_one     .reg %r1
-ht           .reg %r6
-lt           .reg %r5
-m            .reg %r4
-c3           .reg %r3
-
-SQR_ADD_C  .macro  A0L,A0R,C1,C2,C3
-    XMPYU   A0L,A0R,ftemp1       ; m
-    FSTD    ftemp1,-24(%sp)      ; store m
-
-    XMPYU   A0R,A0R,ftemp2       ; lt
-    FSTD    ftemp2,-16(%sp)      ; store lt
-
-    XMPYU   A0L,A0L,ftemp3       ; ht
-    FSTD    ftemp3,-8(%sp)       ; store ht
-
-    LDD     -24(%sp),m           ; load m
-    AND     m,high_mask,temp2    ; m & Mask
-    DEPD,Z  m,30,31,temp3        ; m << 32+1
-    LDD     -16(%sp),lt          ; lt
-
-    LDD     -8(%sp),ht           ; ht
-    EXTRD,U temp2,32,33,temp1    ; temp1 = m&Mask >> 32-1
-    ADD     temp3,lt,lt          ; lt = lt+m
-    ADD,L   ht,temp1,ht          ; ht += temp1
-    ADD,DC  ht,%r0,ht            ; ht++
-
-    ADD     C1,lt,C1             ; c1=c1+lt
-    ADD,DC  ht,%r0,ht            ; ht++
-
-    ADD     C2,ht,C2             ; c2=c2+ht
-    ADD,DC  C3,%r0,C3            ; c3++
-.endm
-
-SQR_ADD_C2 .macro  A0L,A0R,A1L,A1R,C1,C2,C3
-    XMPYU   A0L,A1R,ftemp1          ; m1 = bl*ht
-    FSTD    ftemp1,-16(%sp)         ;
-    XMPYU   A0R,A1L,ftemp2          ; m = bh*lt
-    FSTD    ftemp2,-8(%sp)          ;
-    XMPYU   A0R,A1R,ftemp3          ; lt = bl*lt
-    FSTD    ftemp3,-32(%sp)
-    XMPYU   A0L,A1L,ftemp4          ; ht = bh*ht
-    FSTD    ftemp4,-24(%sp)         ;
-
-    LDD     -8(%sp),m               ; r21 = m
-    LDD     -16(%sp),m1             ; r19 = m1
-    ADD,L   m,m1,m                  ; m+m1
-
-    DEPD,Z  m,31,32,temp3           ; (m+m1<<32)
-    LDD     -24(%sp),ht             ; r24 = ht
-
-    CMPCLR,*>>= m,m1,%r0            ; if (m < m1)
-    ADD,L   ht,high_one,ht          ; ht+=high_one
-
-    EXTRD,U m,31,32,temp1           ; m >> 32
-    LDD     -32(%sp),lt             ; lt
-    ADD,L   ht,temp1,ht             ; ht+= m>>32
-    ADD     lt,temp3,lt             ; lt = lt+m1
-    ADD,DC  ht,%r0,ht               ; ht++
-
-    ADD     ht,ht,ht                ; ht=ht+ht;
-    ADD,DC  C3,%r0,C3               ; add in carry (c3++)
-
-    ADD     lt,lt,lt                ; lt=lt+lt;
-    ADD,DC  ht,%r0,ht               ; add in carry (ht++)
-
-    ADD     C1,lt,C1                ; c1=c1+lt
-    ADD,DC,*NUV ht,%r0,ht           ; add in carry (ht++)
-    LDO     1(C3),C3              ; bump c3 if overflow,nullify otherwise
-
-    ADD     C2,ht,C2                ; c2 = c2 + ht
-    ADD,DC  C3,%r0,C3             ; add in carry (c3++)
-.endm
-
-;
-;void bn_sqr_comba8(BN_ULONG *r, BN_ULONG *a)
-; arg0 = r_ptr
-; arg1 = a_ptr
-;
-
-bn_sqr_comba8
-	.PROC
-	.CALLINFO FRAME=128,ENTRY_GR=%r3,ARGS_SAVED,ORDERING_AWARE
-	.EXPORT	bn_sqr_comba8,ENTRY,PRIV_LEV=3,NO_RELOCATION,LONG_RETURN
-    .ENTRY
-	.align 64
-
-    STD     %r3,0(%sp)          ; save r3
-    STD     %r4,8(%sp)          ; save r4
-    STD     %r5,16(%sp)         ; save r5
-    STD     %r6,24(%sp)         ; save r6
-
-	;
-	; Zero out carries
-	;
-	COPY     %r0,c1
-	COPY     %r0,c2
-	COPY     %r0,c3
-
-	LDO      128(%sp),%sp       ; bump stack
-    DEPDI,Z -1,32,33,high_mask   ; Create Mask 0xffffffff80000000L
-    DEPDI,Z  1,31,1,high_one     ; Create Value  1 << 32
-
-	;
-	; Load up all of the values we are going to use
-	;
-    FLDD     0(a_ptr),a0       
-    FLDD     8(a_ptr),a1       
-    FLDD    16(a_ptr),a2       
-    FLDD    24(a_ptr),a3       
-    FLDD    32(a_ptr),a4       
-    FLDD    40(a_ptr),a5       
-    FLDD    48(a_ptr),a6       
-    FLDD    56(a_ptr),a7       
-
-	SQR_ADD_C a0L,a0R,c1,c2,c3
-	STD     c1,0(r_ptr)          ; r[0] = c1;
-	COPY    %r0,c1
-
-	SQR_ADD_C2 a1L,a1R,a0L,a0R,c2,c3,c1
-	STD     c2,8(r_ptr)          ; r[1] = c2;
-	COPY    %r0,c2
-
-	SQR_ADD_C a1L,a1R,c3,c1,c2
-	SQR_ADD_C2 a2L,a2R,a0L,a0R,c3,c1,c2
-	STD     c3,16(r_ptr)            ; r[2] = c3;
-	COPY    %r0,c3
-
-	SQR_ADD_C2 a3L,a3R,a0L,a0R,c1,c2,c3
-	SQR_ADD_C2 a2L,a2R,a1L,a1R,c1,c2,c3
-	STD     c1,24(r_ptr)           ; r[3] = c1;
-	COPY    %r0,c1
-
-	SQR_ADD_C a2L,a2R,c2,c3,c1
-	SQR_ADD_C2 a3L,a3R,a1L,a1R,c2,c3,c1
-	SQR_ADD_C2 a4L,a4R,a0L,a0R,c2,c3,c1
-	STD     c2,32(r_ptr)          ; r[4] = c2;
-	COPY    %r0,c2
-
-	SQR_ADD_C2 a5L,a5R,a0L,a0R,c3,c1,c2
-	SQR_ADD_C2 a4L,a4R,a1L,a1R,c3,c1,c2
-	SQR_ADD_C2 a3L,a3R,a2L,a2R,c3,c1,c2
-	STD     c3,40(r_ptr)          ; r[5] = c3;
-	COPY    %r0,c3
-
-	SQR_ADD_C a3L,a3R,c1,c2,c3
-	SQR_ADD_C2 a4L,a4R,a2L,a2R,c1,c2,c3
-	SQR_ADD_C2 a5L,a5R,a1L,a1R,c1,c2,c3
-	SQR_ADD_C2 a6L,a6R,a0L,a0R,c1,c2,c3
-	STD     c1,48(r_ptr)          ; r[6] = c1;
-	COPY    %r0,c1
-
-	SQR_ADD_C2 a7L,a7R,a0L,a0R,c2,c3,c1
-	SQR_ADD_C2 a6L,a6R,a1L,a1R,c2,c3,c1
-	SQR_ADD_C2 a5L,a5R,a2L,a2R,c2,c3,c1
-	SQR_ADD_C2 a4L,a4R,a3L,a3R,c2,c3,c1
-	STD     c2,56(r_ptr)          ; r[7] = c2;
-	COPY    %r0,c2
-
-	SQR_ADD_C a4L,a4R,c3,c1,c2
-	SQR_ADD_C2 a5L,a5R,a3L,a3R,c3,c1,c2
-	SQR_ADD_C2 a6L,a6R,a2L,a2R,c3,c1,c2
-	SQR_ADD_C2 a7L,a7R,a1L,a1R,c3,c1,c2
-	STD     c3,64(r_ptr)          ; r[8] = c3;
-	COPY    %r0,c3
-
-	SQR_ADD_C2 a7L,a7R,a2L,a2R,c1,c2,c3
-	SQR_ADD_C2 a6L,a6R,a3L,a3R,c1,c2,c3
-	SQR_ADD_C2 a5L,a5R,a4L,a4R,c1,c2,c3
-	STD     c1,72(r_ptr)          ; r[9] = c1;
-	COPY    %r0,c1
-
-	SQR_ADD_C a5L,a5R,c2,c3,c1
-	SQR_ADD_C2 a6L,a6R,a4L,a4R,c2,c3,c1
-	SQR_ADD_C2 a7L,a7R,a3L,a3R,c2,c3,c1
-	STD     c2,80(r_ptr)          ; r[10] = c2;
-	COPY    %r0,c2
-
-	SQR_ADD_C2 a7L,a7R,a4L,a4R,c3,c1,c2
-	SQR_ADD_C2 a6L,a6R,a5L,a5R,c3,c1,c2
-	STD     c3,88(r_ptr)          ; r[11] = c3;
-	COPY    %r0,c3
-	
-	SQR_ADD_C a6L,a6R,c1,c2,c3
-	SQR_ADD_C2 a7L,a7R,a5L,a5R,c1,c2,c3
-	STD     c1,96(r_ptr)          ; r[12] = c1;
-	COPY    %r0,c1
-
-	SQR_ADD_C2 a7L,a7R,a6L,a6R,c2,c3,c1
-	STD     c2,104(r_ptr)         ; r[13] = c2;
-	COPY    %r0,c2
-
-	SQR_ADD_C a7L,a7R,c3,c1,c2
-	STD     c3, 112(r_ptr)       ; r[14] = c3
-	STD     c1, 120(r_ptr)       ; r[15] = c1
-
-    .EXIT
-    LDD     -104(%sp),%r6        ; restore r6
-    LDD     -112(%sp),%r5        ; restore r5
-    LDD     -120(%sp),%r4        ; restore r4
-    BVE     (%rp)
-    LDD,MB  -128(%sp),%r3
-
-	.PROCEND	
-
-;-----------------------------------------------------------------------------
-;
-;void bn_sqr_comba4(BN_ULONG *r, BN_ULONG *a)
-; arg0 = r_ptr
-; arg1 = a_ptr
-;
-
-bn_sqr_comba4
-	.proc
-	.callinfo FRAME=128,ENTRY_GR=%r3,ARGS_SAVED,ORDERING_AWARE
-	.EXPORT	bn_sqr_comba4,ENTRY,PRIV_LEV=3,NO_RELOCATION,LONG_RETURN
-    .entry
-	.align 64
-    STD     %r3,0(%sp)          ; save r3
-    STD     %r4,8(%sp)          ; save r4
-    STD     %r5,16(%sp)         ; save r5
-    STD     %r6,24(%sp)         ; save r6
-
-	;
-	; Zero out carries
-	;
-	COPY     %r0,c1
-	COPY     %r0,c2
-	COPY     %r0,c3
-
-	LDO      128(%sp),%sp       ; bump stack
-    DEPDI,Z -1,32,33,high_mask   ; Create Mask 0xffffffff80000000L
-    DEPDI,Z  1,31,1,high_one     ; Create Value  1 << 32
-
-	;
-	; Load up all of the values we are going to use
-	;
-    FLDD     0(a_ptr),a0       
-    FLDD     8(a_ptr),a1       
-    FLDD    16(a_ptr),a2       
-    FLDD    24(a_ptr),a3       
-    FLDD    32(a_ptr),a4       
-    FLDD    40(a_ptr),a5       
-    FLDD    48(a_ptr),a6       
-    FLDD    56(a_ptr),a7       
-
-	SQR_ADD_C a0L,a0R,c1,c2,c3
-
-	STD     c1,0(r_ptr)          ; r[0] = c1;
-	COPY    %r0,c1
-
-	SQR_ADD_C2 a1L,a1R,a0L,a0R,c2,c3,c1
-
-	STD     c2,8(r_ptr)          ; r[1] = c2;
-	COPY    %r0,c2
-
-	SQR_ADD_C a1L,a1R,c3,c1,c2
-	SQR_ADD_C2 a2L,a2R,a0L,a0R,c3,c1,c2
-
-	STD     c3,16(r_ptr)            ; r[2] = c3;
-	COPY    %r0,c3
-
-	SQR_ADD_C2 a3L,a3R,a0L,a0R,c1,c2,c3
-	SQR_ADD_C2 a2L,a2R,a1L,a1R,c1,c2,c3
-
-	STD     c1,24(r_ptr)           ; r[3] = c1;
-	COPY    %r0,c1
-
-	SQR_ADD_C a2L,a2R,c2,c3,c1
-	SQR_ADD_C2 a3L,a3R,a1L,a1R,c2,c3,c1
-
-	STD     c2,32(r_ptr)           ; r[4] = c2;
-	COPY    %r0,c2
-
-	SQR_ADD_C2 a3L,a3R,a2L,a2R,c3,c1,c2
-	STD     c3,40(r_ptr)           ; r[5] = c3;
-	COPY    %r0,c3
-
-	SQR_ADD_C a3L,a3R,c1,c2,c3
-	STD     c1,48(r_ptr)           ; r[6] = c1;
-	STD     c2,56(r_ptr)           ; r[7] = c2;
-
-    .EXIT
-    LDD     -104(%sp),%r6        ; restore r6
-    LDD     -112(%sp),%r5        ; restore r5
-    LDD     -120(%sp),%r4        ; restore r4
-    BVE     (%rp)
-    LDD,MB  -128(%sp),%r3
-
-	.PROCEND	
-
-
-;---------------------------------------------------------------------------
-
-MUL_ADD_C  .macro  A0L,A0R,B0L,B0R,C1,C2,C3
-    XMPYU   A0L,B0R,ftemp1        ; m1 = bl*ht
-    FSTD    ftemp1,-16(%sp)       ;
-    XMPYU   A0R,B0L,ftemp2        ; m = bh*lt
-    FSTD    ftemp2,-8(%sp)        ;
-    XMPYU   A0R,B0R,ftemp3        ; lt = bl*lt
-    FSTD    ftemp3,-32(%sp)
-    XMPYU   A0L,B0L,ftemp4        ; ht = bh*ht
-    FSTD    ftemp4,-24(%sp)       ;
-
-    LDD     -8(%sp),m             ; r21 = m
-    LDD     -16(%sp),m1           ; r19 = m1
-    ADD,L   m,m1,m                ; m+m1
-
-    DEPD,Z  m,31,32,temp3         ; (m+m1<<32)
-    LDD     -24(%sp),ht           ; r24 = ht
-
-    CMPCLR,*>>= m,m1,%r0          ; if (m < m1)
-    ADD,L   ht,high_one,ht        ; ht+=high_one
-
-    EXTRD,U m,31,32,temp1         ; m >> 32
-    LDD     -32(%sp),lt           ; lt
-    ADD,L   ht,temp1,ht           ; ht+= m>>32
-    ADD     lt,temp3,lt           ; lt = lt+m1
-    ADD,DC  ht,%r0,ht             ; ht++
-
-    ADD     C1,lt,C1              ; c1=c1+lt
-    ADD,DC  ht,%r0,ht             ; bump c3 if overflow,nullify otherwise
-
-    ADD     C2,ht,C2              ; c2 = c2 + ht
-    ADD,DC  C3,%r0,C3             ; add in carry (c3++)
-.endm
-
-
-;
-;void bn_mul_comba8(BN_ULONG *r, BN_ULONG *a, BN_ULONG *b)
-; arg0 = r_ptr
-; arg1 = a_ptr
-; arg2 = b_ptr
-;
-
-bn_mul_comba8
-	.proc
-	.callinfo FRAME=128,ENTRY_GR=%r3,ARGS_SAVED,ORDERING_AWARE
-	.EXPORT	bn_mul_comba8,ENTRY,PRIV_LEV=3,NO_RELOCATION,LONG_RETURN
-    .entry
-	.align 64
-
-    STD     %r3,0(%sp)          ; save r3
-    STD     %r4,8(%sp)          ; save r4
-    STD     %r5,16(%sp)         ; save r5
-    STD     %r6,24(%sp)         ; save r6
-    FSTD    %fr12,32(%sp)       ; save r6
-    FSTD    %fr13,40(%sp)       ; save r7
-
-	;
-	; Zero out carries
-	;
-	COPY     %r0,c1
-	COPY     %r0,c2
-	COPY     %r0,c3
-
-	LDO      128(%sp),%sp       ; bump stack
-    DEPDI,Z  1,31,1,high_one     ; Create Value  1 << 32
-
-	;
-	; Load up all of the values we are going to use
-	;
-    FLDD      0(a_ptr),a0       
-    FLDD      8(a_ptr),a1       
-    FLDD     16(a_ptr),a2       
-    FLDD     24(a_ptr),a3       
-    FLDD     32(a_ptr),a4       
-    FLDD     40(a_ptr),a5       
-    FLDD     48(a_ptr),a6       
-    FLDD     56(a_ptr),a7       
-
-    FLDD      0(b_ptr),b0       
-    FLDD      8(b_ptr),b1       
-    FLDD     16(b_ptr),b2       
-    FLDD     24(b_ptr),b3       
-    FLDD     32(b_ptr),b4       
-    FLDD     40(b_ptr),b5       
-    FLDD     48(b_ptr),b6       
-    FLDD     56(b_ptr),b7       
-
-	MUL_ADD_C a0L,a0R,b0L,b0R,c1,c2,c3
-	STD       c1,0(r_ptr)
-	COPY      %r0,c1
-
-	MUL_ADD_C a0L,a0R,b1L,b1R,c2,c3,c1
-	MUL_ADD_C a1L,a1R,b0L,b0R,c2,c3,c1
-	STD       c2,8(r_ptr)
-	COPY      %r0,c2
-
-	MUL_ADD_C a2L,a2R,b0L,b0R,c3,c1,c2
-	MUL_ADD_C a1L,a1R,b1L,b1R,c3,c1,c2
-	MUL_ADD_C a0L,a0R,b2L,b2R,c3,c1,c2
-	STD       c3,16(r_ptr)
-	COPY      %r0,c3
-
-	MUL_ADD_C a0L,a0R,b3L,b3R,c1,c2,c3
-	MUL_ADD_C a1L,a1R,b2L,b2R,c1,c2,c3
-	MUL_ADD_C a2L,a2R,b1L,b1R,c1,c2,c3
-	MUL_ADD_C a3L,a3R,b0L,b0R,c1,c2,c3
-	STD       c1,24(r_ptr)
-	COPY      %r0,c1
-
-	MUL_ADD_C a4L,a4R,b0L,b0R,c2,c3,c1
-	MUL_ADD_C a3L,a3R,b1L,b1R,c2,c3,c1
-	MUL_ADD_C a2L,a2R,b2L,b2R,c2,c3,c1
-	MUL_ADD_C a1L,a1R,b3L,b3R,c2,c3,c1
-	MUL_ADD_C a0L,a0R,b4L,b4R,c2,c3,c1
-	STD       c2,32(r_ptr)
-	COPY      %r0,c2
-
-	MUL_ADD_C a0L,a0R,b5L,b5R,c3,c1,c2
-	MUL_ADD_C a1L,a1R,b4L,b4R,c3,c1,c2
-	MUL_ADD_C a2L,a2R,b3L,b3R,c3,c1,c2
-	MUL_ADD_C a3L,a3R,b2L,b2R,c3,c1,c2
-	MUL_ADD_C a4L,a4R,b1L,b1R,c3,c1,c2
-	MUL_ADD_C a5L,a5R,b0L,b0R,c3,c1,c2
-	STD       c3,40(r_ptr)
-	COPY      %r0,c3
-
-	MUL_ADD_C a6L,a6R,b0L,b0R,c1,c2,c3
-	MUL_ADD_C a5L,a5R,b1L,b1R,c1,c2,c3
-	MUL_ADD_C a4L,a4R,b2L,b2R,c1,c2,c3
-	MUL_ADD_C a3L,a3R,b3L,b3R,c1,c2,c3
-	MUL_ADD_C a2L,a2R,b4L,b4R,c1,c2,c3
-	MUL_ADD_C a1L,a1R,b5L,b5R,c1,c2,c3
-	MUL_ADD_C a0L,a0R,b6L,b6R,c1,c2,c3
-	STD       c1,48(r_ptr)
-	COPY      %r0,c1
-	
-	MUL_ADD_C a0L,a0R,b7L,b7R,c2,c3,c1
-	MUL_ADD_C a1L,a1R,b6L,b6R,c2,c3,c1
-	MUL_ADD_C a2L,a2R,b5L,b5R,c2,c3,c1
-	MUL_ADD_C a3L,a3R,b4L,b4R,c2,c3,c1
-	MUL_ADD_C a4L,a4R,b3L,b3R,c2,c3,c1
-	MUL_ADD_C a5L,a5R,b2L,b2R,c2,c3,c1
-	MUL_ADD_C a6L,a6R,b1L,b1R,c2,c3,c1
-	MUL_ADD_C a7L,a7R,b0L,b0R,c2,c3,c1
-	STD       c2,56(r_ptr)
-	COPY      %r0,c2
-
-	MUL_ADD_C a7L,a7R,b1L,b1R,c3,c1,c2
-	MUL_ADD_C a6L,a6R,b2L,b2R,c3,c1,c2
-	MUL_ADD_C a5L,a5R,b3L,b3R,c3,c1,c2
-	MUL_ADD_C a4L,a4R,b4L,b4R,c3,c1,c2
-	MUL_ADD_C a3L,a3R,b5L,b5R,c3,c1,c2
-	MUL_ADD_C a2L,a2R,b6L,b6R,c3,c1,c2
-	MUL_ADD_C a1L,a1R,b7L,b7R,c3,c1,c2
-	STD       c3,64(r_ptr)
-	COPY      %r0,c3
-
-	MUL_ADD_C a2L,a2R,b7L,b7R,c1,c2,c3
-	MUL_ADD_C a3L,a3R,b6L,b6R,c1,c2,c3
-	MUL_ADD_C a4L,a4R,b5L,b5R,c1,c2,c3
-	MUL_ADD_C a5L,a5R,b4L,b4R,c1,c2,c3
-	MUL_ADD_C a6L,a6R,b3L,b3R,c1,c2,c3
-	MUL_ADD_C a7L,a7R,b2L,b2R,c1,c2,c3
-	STD       c1,72(r_ptr)
-	COPY      %r0,c1
-
-	MUL_ADD_C a7L,a7R,b3L,b3R,c2,c3,c1
-	MUL_ADD_C a6L,a6R,b4L,b4R,c2,c3,c1
-	MUL_ADD_C a5L,a5R,b5L,b5R,c2,c3,c1
-	MUL_ADD_C a4L,a4R,b6L,b6R,c2,c3,c1
-	MUL_ADD_C a3L,a3R,b7L,b7R,c2,c3,c1
-	STD       c2,80(r_ptr)
-	COPY      %r0,c2
-
-	MUL_ADD_C a4L,a4R,b7L,b7R,c3,c1,c2
-	MUL_ADD_C a5L,a5R,b6L,b6R,c3,c1,c2
-	MUL_ADD_C a6L,a6R,b5L,b5R,c3,c1,c2
-	MUL_ADD_C a7L,a7R,b4L,b4R,c3,c1,c2
-	STD       c3,88(r_ptr)
-	COPY      %r0,c3
-
-	MUL_ADD_C a7L,a7R,b5L,b5R,c1,c2,c3
-	MUL_ADD_C a6L,a6R,b6L,b6R,c1,c2,c3
-	MUL_ADD_C a5L,a5R,b7L,b7R,c1,c2,c3
-	STD       c1,96(r_ptr)
-	COPY      %r0,c1
-
-	MUL_ADD_C a6L,a6R,b7L,b7R,c2,c3,c1
-	MUL_ADD_C a7L,a7R,b6L,b6R,c2,c3,c1
-	STD       c2,104(r_ptr)
-	COPY      %r0,c2
-
-	MUL_ADD_C a7L,a7R,b7L,b7R,c3,c1,c2
-	STD       c3,112(r_ptr)
-	STD       c1,120(r_ptr)
-
-    .EXIT
-    FLDD    -88(%sp),%fr13 
-    FLDD    -96(%sp),%fr12 
-    LDD     -104(%sp),%r6        ; restore r6
-    LDD     -112(%sp),%r5        ; restore r5
-    LDD     -120(%sp),%r4        ; restore r4
-    BVE     (%rp)
-    LDD,MB  -128(%sp),%r3
-
-	.PROCEND	
-
-;-----------------------------------------------------------------------------
-;
-;void bn_mul_comba4(BN_ULONG *r, BN_ULONG *a, BN_ULONG *b)
-; arg0 = r_ptr
-; arg1 = a_ptr
-; arg2 = b_ptr
-;
-
-bn_mul_comba4
-	.proc
-	.callinfo FRAME=128,ENTRY_GR=%r3,ARGS_SAVED,ORDERING_AWARE
-	.EXPORT	bn_mul_comba4,ENTRY,PRIV_LEV=3,NO_RELOCATION,LONG_RETURN
-    .entry
-	.align 64
-
-    STD     %r3,0(%sp)          ; save r3
-    STD     %r4,8(%sp)          ; save r4
-    STD     %r5,16(%sp)         ; save r5
-    STD     %r6,24(%sp)         ; save r6
-    FSTD    %fr12,32(%sp)       ; save r6
-    FSTD    %fr13,40(%sp)       ; save r7
-
-	;
-	; Zero out carries
-	;
-	COPY     %r0,c1
-	COPY     %r0,c2
-	COPY     %r0,c3
-
-	LDO      128(%sp),%sp       ; bump stack
-    DEPDI,Z  1,31,1,high_one     ; Create Value  1 << 32
-
-	;
-	; Load up all of the values we are going to use
-	;
-    FLDD      0(a_ptr),a0       
-    FLDD      8(a_ptr),a1       
-    FLDD     16(a_ptr),a2       
-    FLDD     24(a_ptr),a3       
-
-    FLDD      0(b_ptr),b0       
-    FLDD      8(b_ptr),b1       
-    FLDD     16(b_ptr),b2       
-    FLDD     24(b_ptr),b3       
-
-	MUL_ADD_C a0L,a0R,b0L,b0R,c1,c2,c3
-	STD       c1,0(r_ptr)
-	COPY      %r0,c1
-
-	MUL_ADD_C a0L,a0R,b1L,b1R,c2,c3,c1
-	MUL_ADD_C a1L,a1R,b0L,b0R,c2,c3,c1
-	STD       c2,8(r_ptr)
-	COPY      %r0,c2
-
-	MUL_ADD_C a2L,a2R,b0L,b0R,c3,c1,c2
-	MUL_ADD_C a1L,a1R,b1L,b1R,c3,c1,c2
-	MUL_ADD_C a0L,a0R,b2L,b2R,c3,c1,c2
-	STD       c3,16(r_ptr)
-	COPY      %r0,c3
-
-	MUL_ADD_C a0L,a0R,b3L,b3R,c1,c2,c3
-	MUL_ADD_C a1L,a1R,b2L,b2R,c1,c2,c3
-	MUL_ADD_C a2L,a2R,b1L,b1R,c1,c2,c3
-	MUL_ADD_C a3L,a3R,b0L,b0R,c1,c2,c3
-	STD       c1,24(r_ptr)
-	COPY      %r0,c1
-
-	MUL_ADD_C a3L,a3R,b1L,b1R,c2,c3,c1
-	MUL_ADD_C a2L,a2R,b2L,b2R,c2,c3,c1
-	MUL_ADD_C a1L,a1R,b3L,b3R,c2,c3,c1
-	STD       c2,32(r_ptr)
-	COPY      %r0,c2
-
-	MUL_ADD_C a2L,a2R,b3L,b3R,c3,c1,c2
-	MUL_ADD_C a3L,a3R,b2L,b2R,c3,c1,c2
-	STD       c3,40(r_ptr)
-	COPY      %r0,c3
-
-	MUL_ADD_C a3L,a3R,b3L,b3R,c1,c2,c3
-	STD       c1,48(r_ptr)
-	STD       c2,56(r_ptr)
-
-    .EXIT
-    FLDD    -88(%sp),%fr13 
-    FLDD    -96(%sp),%fr12 
-    LDD     -104(%sp),%r6        ; restore r6
-    LDD     -112(%sp),%r5        ; restore r5
-    LDD     -120(%sp),%r4        ; restore r4
-    BVE     (%rp)
-    LDD,MB  -128(%sp),%r3
-
-	.PROCEND	
-
-
-	.SPACE	$TEXT$
-	.SUBSPA	$CODE$
-	.SPACE	$PRIVATE$,SORT=16
-	.IMPORT	$global$,DATA
-	.SPACE	$TEXT$
-	.SUBSPA	$CODE$
-	.SUBSPA	$LIT$,ACCESS=0x2c
-C$4
-	.ALIGN	8
-	.STRINGZ	"Division would overflow (%d)\n"
-	.END
diff --git a/crypto/openssl/crypto/bn/asm/ppc.pl b/crypto/openssl/crypto/bn/asm/ppc.pl
deleted file mode 100644
index 08e005347388..000000000000
--- a/crypto/openssl/crypto/bn/asm/ppc.pl
+++ /dev/null
@@ -1,2078 +0,0 @@
-#!/usr/bin/env perl
-#
-# Implemented as a Perl wrapper as we want to support several different
-# architectures with single file. We pick up the target based on the
-# file name we are asked to generate.
-#
-# It should be noted though that this perl code is nothing like
-# <openssl>/crypto/perlasm/x86*. In this case perl is used pretty much
-# as pre-processor to cover for platform differences in name decoration,
-# linker tables, 32-/64-bit instruction sets...
-#
-# As you might know there're several PowerPC ABI in use. Most notably
-# Linux and AIX use different 32-bit ABIs. Good news are that these ABIs
-# are similar enough to implement leaf(!) functions, which would be ABI
-# neutral. And that's what you find here: ABI neutral leaf functions.
-# In case you wonder what that is...
-#
-#       AIX performance
-#
-#	MEASUREMENTS WITH cc ON a 200 MhZ PowerPC 604e.
-#
-#	The following is the performance of 32-bit compiler
-#	generated code:
-#
-#	OpenSSL 0.9.6c 21 dec 2001
-#	built on: Tue Jun 11 11:06:51 EDT 2002
-#	options:bn(64,32) ...
-#compiler: cc -DTHREADS  -DAIX -DB_ENDIAN -DBN_LLONG -O3
-#                  sign    verify    sign/s verify/s
-#rsa  512 bits   0.0098s   0.0009s    102.0   1170.6
-#rsa 1024 bits   0.0507s   0.0026s     19.7    387.5
-#rsa 2048 bits   0.3036s   0.0085s      3.3    117.1
-#rsa 4096 bits   2.0040s   0.0299s      0.5     33.4
-#dsa  512 bits   0.0087s   0.0106s    114.3     94.5
-#dsa 1024 bits   0.0256s   0.0313s     39.0     32.0	
-#
-#	Same bechmark with this assembler code:
-#
-#rsa  512 bits   0.0056s   0.0005s    178.6   2049.2
-#rsa 1024 bits   0.0283s   0.0015s     35.3    674.1
-#rsa 2048 bits   0.1744s   0.0050s      5.7    201.2
-#rsa 4096 bits   1.1644s   0.0179s      0.9     55.7
-#dsa  512 bits   0.0052s   0.0062s    191.6    162.0
-#dsa 1024 bits   0.0149s   0.0180s     67.0     55.5
-#
-#	Number of operations increases by at almost 75%
-#
-#	Here are performance numbers for 64-bit compiler
-#	generated code:
-#
-#	OpenSSL 0.9.6g [engine] 9 Aug 2002
-#	built on: Fri Apr 18 16:59:20 EDT 2003
-#	options:bn(64,64) ...
-#	compiler: cc -DTHREADS -D_REENTRANT -q64 -DB_ENDIAN -O3
-#                  sign    verify    sign/s verify/s
-#rsa  512 bits   0.0028s   0.0003s    357.1   3844.4
-#rsa 1024 bits   0.0148s   0.0008s     67.5   1239.7
-#rsa 2048 bits   0.0963s   0.0028s     10.4    353.0
-#rsa 4096 bits   0.6538s   0.0102s      1.5     98.1
-#dsa  512 bits   0.0026s   0.0032s    382.5    313.7
-#dsa 1024 bits   0.0081s   0.0099s    122.8    100.6
-#
-#	Same benchmark with this assembler code:
-#
-#rsa  512 bits   0.0020s   0.0002s    510.4   6273.7
-#rsa 1024 bits   0.0088s   0.0005s    114.1   2128.3
-#rsa 2048 bits   0.0540s   0.0016s     18.5    622.5
-#rsa 4096 bits   0.3700s   0.0058s      2.7    171.0
-#dsa  512 bits   0.0016s   0.0020s    610.7    507.1
-#dsa 1024 bits   0.0047s   0.0058s    212.5    173.2
-#	
-#	Again, performance increases by at about 75%
-#
-#       Mac OS X, Apple G5 1.8GHz (Note this is 32 bit code)
-#       OpenSSL 0.9.7c 30 Sep 2003
-#
-#       Original code.
-#
-#rsa  512 bits   0.0011s   0.0001s    906.1  11012.5
-#rsa 1024 bits   0.0060s   0.0003s    166.6   3363.1
-#rsa 2048 bits   0.0370s   0.0010s     27.1    982.4
-#rsa 4096 bits   0.2426s   0.0036s      4.1    280.4
-#dsa  512 bits   0.0010s   0.0012s   1038.1    841.5
-#dsa 1024 bits   0.0030s   0.0037s    329.6    269.7
-#dsa 2048 bits   0.0101s   0.0127s     98.9     78.6
-#
-#       Same benchmark with this assembler code:
-#
-#rsa  512 bits   0.0007s   0.0001s   1416.2  16645.9
-#rsa 1024 bits   0.0036s   0.0002s    274.4   5380.6
-#rsa 2048 bits   0.0222s   0.0006s     45.1   1589.5
-#rsa 4096 bits   0.1469s   0.0022s      6.8    449.6
-#dsa  512 bits   0.0006s   0.0007s   1664.2   1376.2
-#dsa 1024 bits   0.0018s   0.0023s    545.0    442.2
-#dsa 2048 bits   0.0061s   0.0075s    163.5    132.8
-#
-#        Performance increase of ~60%
-#
-#	If you have comments or suggestions to improve code send
-#	me a note at schari@us.ibm.com
-#
-
-$opf = shift;
-
-if ($opf =~ /32\.s/) {
-	$BITS=	32;
-	$BNSZ=	$BITS/8;
-	$ISA=	"\"ppc\"";
-
-	$LD=	"lwz";		# load
-	$LDU=	"lwzu";		# load and update
-	$ST=	"stw";		# store
-	$STU=	"stwu";		# store and update
-	$UMULL=	"mullw";	# unsigned multiply low
-	$UMULH=	"mulhwu";	# unsigned multiply high
-	$UDIV=	"divwu";	# unsigned divide
-	$UCMPI=	"cmplwi";	# unsigned compare with immediate
-	$UCMP=	"cmplw";	# unsigned compare
-	$CNTLZ=	"cntlzw";	# count leading zeros
-	$SHL=	"slw";		# shift left
-	$SHR=	"srw";		# unsigned shift right
-	$SHRI=	"srwi";		# unsigned shift right by immediate	
-	$SHLI=	"slwi";		# shift left by immediate
-	$CLRU=	"clrlwi";	# clear upper bits
-	$INSR=	"insrwi";	# insert right
-	$ROTL=	"rotlwi";	# rotate left by immediate
-	$TR=	"tw";		# conditional trap
-} elsif ($opf =~ /64\.s/) {
-	$BITS=	64;
-	$BNSZ=	$BITS/8;
-	$ISA=	"\"ppc64\"";
-
-	# same as above, but 64-bit mnemonics...
-	$LD=	"ld";		# load
-	$LDU=	"ldu";		# load and update
-	$ST=	"std";		# store
-	$STU=	"stdu";		# store and update
-	$UMULL=	"mulld";	# unsigned multiply low
-	$UMULH=	"mulhdu";	# unsigned multiply high
-	$UDIV=	"divdu";	# unsigned divide
-	$UCMPI=	"cmpldi";	# unsigned compare with immediate
-	$UCMP=	"cmpld";	# unsigned compare
-	$CNTLZ=	"cntlzd";	# count leading zeros
-	$SHL=	"sld";		# shift left
-	$SHR=	"srd";		# unsigned shift right
-	$SHRI=	"srdi";		# unsigned shift right by immediate	
-	$SHLI=	"sldi";		# shift left by immediate
-	$CLRU=	"clrldi";	# clear upper bits
-	$INSR=	"insrdi";	# insert right 
-	$ROTL=	"rotldi";	# rotate left by immediate
-	$TR=	"td";		# conditional trap
-} else { die "nonsense $opf"; }
-
-( defined shift || open STDOUT,">$opf" ) || die "can't open $opf: $!";
-
-# function entry points from the AIX code
-#
-# There are other, more elegant, ways to handle this. We (IBM) chose
-# this approach as it plays well with scripts we run to 'namespace'
-# OpenSSL .i.e. we add a prefix to all the public symbols so we can
-# co-exist in the same process with other implementations of OpenSSL.
-# 'cleverer' ways of doing these substitutions tend to hide data we
-# need to be obvious.
-#
-my @items = ("bn_sqr_comba4",
-	     "bn_sqr_comba8",
-	     "bn_mul_comba4",
-	     "bn_mul_comba8",
-	     "bn_sub_words",
-	     "bn_add_words",
-	     "bn_div_words",
-	     "bn_sqr_words",
-	     "bn_mul_words",
-	     "bn_mul_add_words");
-
-if    ($opf =~ /linux/)	{  do_linux();	}
-elsif ($opf =~ /aix/)	{  do_aix();	}
-elsif ($opf =~ /osx/)	{  do_osx();	}
-else			{  do_bsd();	}
-
-sub do_linux {
-    $d=&data();
-
-    if ($BITS==64) {
-      foreach $t (@items) {
-        $d =~ s/\.$t:/\
-\t.section\t".opd","aw"\
-\t.align\t3\
-\t.globl\t$t\
-$t:\
-\t.quad\t.$t,.TOC.\@tocbase,0\
-\t.size\t$t,24\
-\t.previous\n\
-\t.type\t.$t,\@function\
-\t.globl\t.$t\
-.$t:/g;
-      }
-    }
-    else {
-      foreach $t (@items) {
-        $d=~s/\.$t/$t/g;
-      }
-    }
-    # hide internal labels to avoid pollution of name table...
-    $d=~s/Lppcasm_/.Lppcasm_/gm;
-    print $d;
-}
-
-sub do_aix {
-    # AIX assembler is smart enough to please the linker without
-    # making us do something special...
-    print &data();
-}
-
-# MacOSX 32 bit
-sub do_osx {
-    $d=&data();
-    # Change the bn symbol prefix from '.' to '_'
-    foreach $t (@items) {
-      $d=~s/\.$t/_$t/g;
-    }
-    # Change .machine to something OS X asm will accept
-    $d=~s/\.machine.*/.text/g;
-    $d=~s/\#/;/g; # change comment from '#' to ';'
-    print $d;
-}
-
-# BSD (Untested)
-sub do_bsd {
-    $d=&data();
-    foreach $t (@items) {
-      $d=~s/\.$t/_$t/g;
-    }
-    print $d;
-}
-
-sub data {
-	local($data)=<<EOF;
-#--------------------------------------------------------------------
-#
-#
-#
-#
-#	File:		ppc32.s
-#
-#	Created by:	Suresh Chari
-#			IBM Thomas J. Watson Research Library
-#			Hawthorne, NY
-#
-#
-#	Description:	Optimized assembly routines for OpenSSL crypto
-#			on the 32 bitPowerPC platform.
-#
-#
-#	Version History
-#
-#	2. Fixed bn_add,bn_sub and bn_div_words, added comments,
-#	   cleaned up code. Also made a single version which can
-#	   be used for both the AIX and Linux compilers. See NOTE
-#	   below.
-#				12/05/03		Suresh Chari
-#			(with lots of help from)        Andy Polyakov
-##	
-#	1. Initial version	10/20/02		Suresh Chari
-#
-#
-#	The following file works for the xlc,cc
-#	and gcc compilers.
-#
-#	NOTE:	To get the file to link correctly with the gcc compiler
-#	        you have to change the names of the routines and remove
-#		the first .(dot) character. This should automatically
-#		be done in the build process.
-#
-#	Hand optimized assembly code for the following routines
-#	
-#	bn_sqr_comba4
-#	bn_sqr_comba8
-#	bn_mul_comba4
-#	bn_mul_comba8
-#	bn_sub_words
-#	bn_add_words
-#	bn_div_words
-#	bn_sqr_words
-#	bn_mul_words
-#	bn_mul_add_words
-#
-#	NOTE:	It is possible to optimize this code more for
-#	specific PowerPC or Power architectures. On the Northstar
-#	architecture the optimizations in this file do
-#	 NOT provide much improvement.
-#
-#	If you have comments or suggestions to improve code send
-#	me a note at schari\@us.ibm.com
-#
-#--------------------------------------------------------------------------
-#
-#	Defines to be used in the assembly code.
-#	
-.set r0,0	# we use it as storage for value of 0
-.set SP,1	# preserved
-.set RTOC,2	# preserved 
-.set r3,3	# 1st argument/return value
-.set r4,4	# 2nd argument/volatile register
-.set r5,5	# 3rd argument/volatile register
-.set r6,6	# ...
-.set r7,7
-.set r8,8
-.set r9,9
-.set r10,10
-.set r11,11
-.set r12,12
-.set r13,13	# not used, nor any other "below" it...
-
-.set BO_IF_NOT,4
-.set BO_IF,12
-.set BO_dCTR_NZERO,16
-.set BO_dCTR_ZERO,18
-.set BO_ALWAYS,20
-.set CR0_LT,0;
-.set CR0_GT,1;
-.set CR0_EQ,2
-.set CR1_FX,4;
-.set CR1_FEX,5;
-.set CR1_VX,6
-.set LR,8
-
-#	Declare function names to be global
-#	NOTE:	For gcc these names MUST be changed to remove
-#	        the first . i.e. for example change ".bn_sqr_comba4"
-#		to "bn_sqr_comba4". This should be automatically done
-#		in the build.
-	
-	.globl	.bn_sqr_comba4
-	.globl	.bn_sqr_comba8
-	.globl	.bn_mul_comba4
-	.globl	.bn_mul_comba8
-	.globl	.bn_sub_words
-	.globl	.bn_add_words
-	.globl	.bn_div_words
-	.globl	.bn_sqr_words
-	.globl	.bn_mul_words
-	.globl	.bn_mul_add_words
-	
-# .text section
-	
-	.machine	$ISA
-
-#
-#	NOTE:	The following label name should be changed to
-#		"bn_sqr_comba4" i.e. remove the first dot
-#		for the gcc compiler. This should be automatically
-#		done in the build
-#
-
-.align	4
-.bn_sqr_comba4:
-#
-# Optimized version of bn_sqr_comba4.
-#
-# void bn_sqr_comba4(BN_ULONG *r, BN_ULONG *a)
-# r3 contains r
-# r4 contains a
-#
-# Freely use registers r5,r6,r7,r8,r9,r10,r11 as follows:	
-# 
-# r5,r6 are the two BN_ULONGs being multiplied.
-# r7,r8 are the results of the 32x32 giving 64 bit multiply.
-# r9,r10, r11 are the equivalents of c1,c2, c3.
-# Here's the assembly
-#
-#
-	xor		r0,r0,r0		# set r0 = 0. Used in the addze
-						# instructions below
-	
-						#sqr_add_c(a,0,c1,c2,c3)
-	$LD		r5,`0*$BNSZ`(r4)		
-	$UMULL		r9,r5,r5		
-	$UMULH		r10,r5,r5		#in first iteration. No need
-						#to add since c1=c2=c3=0.
-						# Note c3(r11) is NOT set to 0
-						# but will be.
-
-	$ST		r9,`0*$BNSZ`(r3)	# r[0]=c1;
-						# sqr_add_c2(a,1,0,c2,c3,c1);
-	$LD		r6,`1*$BNSZ`(r4)		
-	$UMULL		r7,r5,r6
-	$UMULH		r8,r5,r6
-					
-	addc		r7,r7,r7		# compute (r7,r8)=2*(r7,r8)
-	adde		r8,r8,r8
-	addze		r9,r0			# catch carry if any.
-						# r9= r0(=0) and carry 
-	
-	addc		r10,r7,r10		# now add to temp result.
-	addze		r11,r8                  # r8 added to r11 which is 0 
-	addze		r9,r9
-	
-	$ST		r10,`1*$BNSZ`(r3)	#r[1]=c2; 
-						#sqr_add_c(a,1,c3,c1,c2)
-	$UMULL		r7,r6,r6
-	$UMULH		r8,r6,r6
-	addc		r11,r7,r11
-	adde		r9,r8,r9
-	addze		r10,r0
-						#sqr_add_c2(a,2,0,c3,c1,c2)
-	$LD		r6,`2*$BNSZ`(r4)
-	$UMULL		r7,r5,r6
-	$UMULH		r8,r5,r6
-	
-	addc		r7,r7,r7
-	adde		r8,r8,r8
-	addze		r10,r10
-	
-	addc		r11,r7,r11
-	adde		r9,r8,r9
-	addze		r10,r10
-	$ST		r11,`2*$BNSZ`(r3)	#r[2]=c3 
-						#sqr_add_c2(a,3,0,c1,c2,c3);
-	$LD		r6,`3*$BNSZ`(r4)		
-	$UMULL		r7,r5,r6
-	$UMULH		r8,r5,r6
-	addc		r7,r7,r7
-	adde		r8,r8,r8
-	addze		r11,r0
-	
-	addc		r9,r7,r9
-	adde		r10,r8,r10
-	addze		r11,r11
-						#sqr_add_c2(a,2,1,c1,c2,c3);
-	$LD		r5,`1*$BNSZ`(r4)
-	$LD		r6,`2*$BNSZ`(r4)
-	$UMULL		r7,r5,r6
-	$UMULH		r8,r5,r6
-	
-	addc		r7,r7,r7
-	adde		r8,r8,r8
-	addze		r11,r11
-	addc		r9,r7,r9
-	adde		r10,r8,r10
-	addze		r11,r11
-	$ST		r9,`3*$BNSZ`(r3)	#r[3]=c1
-						#sqr_add_c(a,2,c2,c3,c1);
-	$UMULL		r7,r6,r6
-	$UMULH		r8,r6,r6
-	addc		r10,r7,r10
-	adde		r11,r8,r11
-	addze		r9,r0
-						#sqr_add_c2(a,3,1,c2,c3,c1);
-	$LD		r6,`3*$BNSZ`(r4)		
-	$UMULL		r7,r5,r6
-	$UMULH		r8,r5,r6
-	addc		r7,r7,r7
-	adde		r8,r8,r8
-	addze		r9,r9
-	
-	addc		r10,r7,r10
-	adde		r11,r8,r11
-	addze		r9,r9
-	$ST		r10,`4*$BNSZ`(r3)	#r[4]=c2
-						#sqr_add_c2(a,3,2,c3,c1,c2);
-	$LD		r5,`2*$BNSZ`(r4)		
-	$UMULL		r7,r5,r6
-	$UMULH		r8,r5,r6
-	addc		r7,r7,r7
-	adde		r8,r8,r8
-	addze		r10,r0
-	
-	addc		r11,r7,r11
-	adde		r9,r8,r9
-	addze		r10,r10
-	$ST		r11,`5*$BNSZ`(r3)	#r[5] = c3
-						#sqr_add_c(a,3,c1,c2,c3);
-	$UMULL		r7,r6,r6		
-	$UMULH		r8,r6,r6
-	addc		r9,r7,r9
-	adde		r10,r8,r10
-
-	$ST		r9,`6*$BNSZ`(r3)	#r[6]=c1
-	$ST		r10,`7*$BNSZ`(r3)	#r[7]=c2
-	bclr	BO_ALWAYS,CR0_LT
-	.long	0x00000000
-
-#
-#	NOTE:	The following label name should be changed to
-#		"bn_sqr_comba8" i.e. remove the first dot
-#		for the gcc compiler. This should be automatically
-#		done in the build
-#
-	
-.align	4
-.bn_sqr_comba8:
-#
-# This is an optimized version of the bn_sqr_comba8 routine.
-# Tightly uses the adde instruction
-#
-#
-# void bn_sqr_comba8(BN_ULONG *r, BN_ULONG *a)
-# r3 contains r
-# r4 contains a
-#
-# Freely use registers r5,r6,r7,r8,r9,r10,r11 as follows:	
-# 
-# r5,r6 are the two BN_ULONGs being multiplied.
-# r7,r8 are the results of the 32x32 giving 64 bit multiply.
-# r9,r10, r11 are the equivalents of c1,c2, c3.
-#
-# Possible optimization of loading all 8 longs of a into registers
-# doesnt provide any speedup
-# 
-
-	xor		r0,r0,r0		#set r0 = 0.Used in addze
-						#instructions below.
-
-						#sqr_add_c(a,0,c1,c2,c3);
-	$LD		r5,`0*$BNSZ`(r4)
-	$UMULL		r9,r5,r5		#1st iteration:	no carries.
-	$UMULH		r10,r5,r5
-	$ST		r9,`0*$BNSZ`(r3)	# r[0]=c1;
-						#sqr_add_c2(a,1,0,c2,c3,c1);
-	$LD		r6,`1*$BNSZ`(r4)
-	$UMULL		r7,r5,r6
-	$UMULH		r8,r5,r6	
-	
-	addc		r10,r7,r10		#add the two register number
-	adde		r11,r8,r0 		# (r8,r7) to the three register
-	addze		r9,r0			# number (r9,r11,r10).NOTE:r0=0
-	
-	addc		r10,r7,r10		#add the two register number
-	adde		r11,r8,r11 		# (r8,r7) to the three register
-	addze		r9,r9			# number (r9,r11,r10).
-	
-	$ST		r10,`1*$BNSZ`(r3)	# r[1]=c2
-				
-						#sqr_add_c(a,1,c3,c1,c2);
-	$UMULL		r7,r6,r6
-	$UMULH		r8,r6,r6
-	addc		r11,r7,r11
-	adde		r9,r8,r9
-	addze		r10,r0
-						#sqr_add_c2(a,2,0,c3,c1,c2);
-	$LD		r6,`2*$BNSZ`(r4)
-	$UMULL		r7,r5,r6
-	$UMULH		r8,r5,r6
-	
-	addc		r11,r7,r11
-	adde		r9,r8,r9
-	addze		r10,r10
-	
-	addc		r11,r7,r11
-	adde		r9,r8,r9
-	addze		r10,r10
-	
-	$ST		r11,`2*$BNSZ`(r3)	#r[2]=c3
-						#sqr_add_c2(a,3,0,c1,c2,c3);
-	$LD		r6,`3*$BNSZ`(r4)	#r6 = a[3]. r5 is already a[0].
-	$UMULL		r7,r5,r6
-	$UMULH		r8,r5,r6
-	
-	addc		r9,r7,r9
-	adde		r10,r8,r10
-	addze		r11,r0
-	
-	addc		r9,r7,r9
-	adde		r10,r8,r10
-	addze		r11,r11
-						#sqr_add_c2(a,2,1,c1,c2,c3);
-	$LD		r5,`1*$BNSZ`(r4)
-	$LD		r6,`2*$BNSZ`(r4)
-	$UMULL		r7,r5,r6
-	$UMULH		r8,r5,r6
-	
-	addc		r9,r7,r9
-	adde		r10,r8,r10
-	addze		r11,r11
-	
-	addc		r9,r7,r9
-	adde		r10,r8,r10
-	addze		r11,r11
-	
-	$ST		r9,`3*$BNSZ`(r3)	#r[3]=c1;
-						#sqr_add_c(a,2,c2,c3,c1);
-	$UMULL		r7,r6,r6
-	$UMULH		r8,r6,r6
-	
-	addc		r10,r7,r10
-	adde		r11,r8,r11
-	addze		r9,r0
-						#sqr_add_c2(a,3,1,c2,c3,c1);
-	$LD		r6,`3*$BNSZ`(r4)
-	$UMULL		r7,r5,r6
-	$UMULH		r8,r5,r6
-	
-	addc		r10,r7,r10
-	adde		r11,r8,r11
-	addze		r9,r9
-	
-	addc		r10,r7,r10
-	adde		r11,r8,r11
-	addze		r9,r9
-						#sqr_add_c2(a,4,0,c2,c3,c1);
-	$LD		r5,`0*$BNSZ`(r4)
-	$LD		r6,`4*$BNSZ`(r4)
-	$UMULL		r7,r5,r6
-	$UMULH		r8,r5,r6
-	
-	addc		r10,r7,r10
-	adde		r11,r8,r11
-	addze		r9,r9
-	
-	addc		r10,r7,r10
-	adde		r11,r8,r11
-	addze		r9,r9
-	$ST		r10,`4*$BNSZ`(r3)	#r[4]=c2;
-						#sqr_add_c2(a,5,0,c3,c1,c2);
-	$LD		r6,`5*$BNSZ`(r4)
-	$UMULL		r7,r5,r6
-	$UMULH		r8,r5,r6
-	
-	addc		r11,r7,r11
-	adde		r9,r8,r9
-	addze		r10,r0
-	
-	addc		r11,r7,r11
-	adde		r9,r8,r9
-	addze		r10,r10
-						#sqr_add_c2(a,4,1,c3,c1,c2);
-	$LD		r5,`1*$BNSZ`(r4)
-	$LD		r6,`4*$BNSZ`(r4)
-	$UMULL		r7,r5,r6
-	$UMULH		r8,r5,r6
-	
-	addc		r11,r7,r11
-	adde		r9,r8,r9
-	addze		r10,r10
-	
-	addc		r11,r7,r11
-	adde		r9,r8,r9
-	addze		r10,r10
-						#sqr_add_c2(a,3,2,c3,c1,c2);
-	$LD		r5,`2*$BNSZ`(r4)
-	$LD		r6,`3*$BNSZ`(r4)
-	$UMULL		r7,r5,r6
-	$UMULH		r8,r5,r6
-	
-	addc		r11,r7,r11
-	adde		r9,r8,r9
-	addze		r10,r10
-	
-	addc		r11,r7,r11
-	adde		r9,r8,r9
-	addze		r10,r10
-	$ST		r11,`5*$BNSZ`(r3)	#r[5]=c3;
-						#sqr_add_c(a,3,c1,c2,c3);
-	$UMULL		r7,r6,r6
-	$UMULH		r8,r6,r6
-	addc		r9,r7,r9
-	adde		r10,r8,r10
-	addze		r11,r0
-						#sqr_add_c2(a,4,2,c1,c2,c3);
-	$LD		r6,`4*$BNSZ`(r4)
-	$UMULL		r7,r5,r6
-	$UMULH		r8,r5,r6
-	
-	addc		r9,r7,r9
-	adde		r10,r8,r10
-	addze		r11,r11
-	
-	addc		r9,r7,r9
-	adde		r10,r8,r10
-	addze		r11,r11
-						#sqr_add_c2(a,5,1,c1,c2,c3);
-	$LD		r5,`1*$BNSZ`(r4)
-	$LD		r6,`5*$BNSZ`(r4)
-	$UMULL		r7,r5,r6
-	$UMULH		r8,r5,r6
-	
-	addc		r9,r7,r9
-	adde		r10,r8,r10
-	addze		r11,r11
-	
-	addc		r9,r7,r9
-	adde		r10,r8,r10
-	addze		r11,r11
-						#sqr_add_c2(a,6,0,c1,c2,c3);
-	$LD		r5,`0*$BNSZ`(r4)
-	$LD		r6,`6*$BNSZ`(r4)
-	$UMULL		r7,r5,r6
-	$UMULH		r8,r5,r6
-	addc		r9,r7,r9
-	adde		r10,r8,r10
-	addze		r11,r11
-	addc		r9,r7,r9
-	adde		r10,r8,r10
-	addze		r11,r11
-	$ST		r9,`6*$BNSZ`(r3)	#r[6]=c1;
-						#sqr_add_c2(a,7,0,c2,c3,c1);
-	$LD		r6,`7*$BNSZ`(r4)
-	$UMULL		r7,r5,r6
-	$UMULH		r8,r5,r6
-	
-	addc		r10,r7,r10
-	adde		r11,r8,r11
-	addze		r9,r0
-	addc		r10,r7,r10
-	adde		r11,r8,r11
-	addze		r9,r9
-						#sqr_add_c2(a,6,1,c2,c3,c1);
-	$LD		r5,`1*$BNSZ`(r4)
-	$LD		r6,`6*$BNSZ`(r4)
-	$UMULL		r7,r5,r6
-	$UMULH		r8,r5,r6
-	
-	addc		r10,r7,r10
-	adde		r11,r8,r11
-	addze		r9,r9
-	addc		r10,r7,r10
-	adde		r11,r8,r11
-	addze		r9,r9
-						#sqr_add_c2(a,5,2,c2,c3,c1);
-	$LD		r5,`2*$BNSZ`(r4)
-	$LD		r6,`5*$BNSZ`(r4)
-	$UMULL		r7,r5,r6
-	$UMULH		r8,r5,r6
-	addc		r10,r7,r10
-	adde		r11,r8,r11
-	addze		r9,r9
-	addc		r10,r7,r10
-	adde		r11,r8,r11
-	addze		r9,r9
-						#sqr_add_c2(a,4,3,c2,c3,c1);
-	$LD		r5,`3*$BNSZ`(r4)
-	$LD		r6,`4*$BNSZ`(r4)
-	$UMULL		r7,r5,r6
-	$UMULH		r8,r5,r6
-	
-	addc		r10,r7,r10
-	adde		r11,r8,r11
-	addze		r9,r9
-	addc		r10,r7,r10
-	adde		r11,r8,r11
-	addze		r9,r9
-	$ST		r10,`7*$BNSZ`(r3)	#r[7]=c2;
-						#sqr_add_c(a,4,c3,c1,c2);
-	$UMULL		r7,r6,r6
-	$UMULH		r8,r6,r6
-	addc		r11,r7,r11
-	adde		r9,r8,r9
-	addze		r10,r0
-						#sqr_add_c2(a,5,3,c3,c1,c2);
-	$LD		r6,`5*$BNSZ`(r4)
-	$UMULL		r7,r5,r6
-	$UMULH		r8,r5,r6
-	addc		r11,r7,r11
-	adde		r9,r8,r9
-	addze		r10,r10
-	addc		r11,r7,r11
-	adde		r9,r8,r9
-	addze		r10,r10
-						#sqr_add_c2(a,6,2,c3,c1,c2);
-	$LD		r5,`2*$BNSZ`(r4)
-	$LD		r6,`6*$BNSZ`(r4)
-	$UMULL		r7,r5,r6
-	$UMULH		r8,r5,r6
-	addc		r11,r7,r11
-	adde		r9,r8,r9
-	addze		r10,r10
-	
-	addc		r11,r7,r11
-	adde		r9,r8,r9
-	addze		r10,r10
-						#sqr_add_c2(a,7,1,c3,c1,c2);
-	$LD		r5,`1*$BNSZ`(r4)
-	$LD		r6,`7*$BNSZ`(r4)
-	$UMULL		r7,r5,r6
-	$UMULH		r8,r5,r6
-	addc		r11,r7,r11
-	adde		r9,r8,r9
-	addze		r10,r10
-	addc		r11,r7,r11
-	adde		r9,r8,r9
-	addze		r10,r10
-	$ST		r11,`8*$BNSZ`(r3)	#r[8]=c3;
-						#sqr_add_c2(a,7,2,c1,c2,c3);
-	$LD		r5,`2*$BNSZ`(r4)
-	$UMULL		r7,r5,r6
-	$UMULH		r8,r5,r6
-	
-	addc		r9,r7,r9
-	adde		r10,r8,r10
-	addze		r11,r0
-	addc		r9,r7,r9
-	adde		r10,r8,r10
-	addze		r11,r11
-						#sqr_add_c2(a,6,3,c1,c2,c3);
-	$LD		r5,`3*$BNSZ`(r4)
-	$LD		r6,`6*$BNSZ`(r4)
-	$UMULL		r7,r5,r6
-	$UMULH		r8,r5,r6
-	addc		r9,r7,r9
-	adde		r10,r8,r10
-	addze		r11,r11
-	addc		r9,r7,r9
-	adde		r10,r8,r10
-	addze		r11,r11
-						#sqr_add_c2(a,5,4,c1,c2,c3);
-	$LD		r5,`4*$BNSZ`(r4)
-	$LD		r6,`5*$BNSZ`(r4)
-	$UMULL		r7,r5,r6
-	$UMULH		r8,r5,r6
-	addc		r9,r7,r9
-	adde		r10,r8,r10
-	addze		r11,r11
-	addc		r9,r7,r9
-	adde		r10,r8,r10
-	addze		r11,r11
-	$ST		r9,`9*$BNSZ`(r3)	#r[9]=c1;
-						#sqr_add_c(a,5,c2,c3,c1);
-	$UMULL		r7,r6,r6
-	$UMULH		r8,r6,r6
-	addc		r10,r7,r10
-	adde		r11,r8,r11
-	addze		r9,r0
-						#sqr_add_c2(a,6,4,c2,c3,c1);
-	$LD		r6,`6*$BNSZ`(r4)
-	$UMULL		r7,r5,r6
-	$UMULH		r8,r5,r6
-	addc		r10,r7,r10
-	adde		r11,r8,r11
-	addze		r9,r9
-	addc		r10,r7,r10
-	adde		r11,r8,r11
-	addze		r9,r9
-						#sqr_add_c2(a,7,3,c2,c3,c1);
-	$LD		r5,`3*$BNSZ`(r4)
-	$LD		r6,`7*$BNSZ`(r4)
-	$UMULL		r7,r5,r6
-	$UMULH		r8,r5,r6
-	addc		r10,r7,r10
-	adde		r11,r8,r11
-	addze		r9,r9
-	addc		r10,r7,r10
-	adde		r11,r8,r11
-	addze		r9,r9
-	$ST		r10,`10*$BNSZ`(r3)	#r[10]=c2;
-						#sqr_add_c2(a,7,4,c3,c1,c2);
-	$LD		r5,`4*$BNSZ`(r4)
-	$UMULL		r7,r5,r6
-	$UMULH		r8,r5,r6
-	addc		r11,r7,r11
-	adde		r9,r8,r9
-	addze		r10,r0
-	addc		r11,r7,r11
-	adde		r9,r8,r9
-	addze		r10,r10
-						#sqr_add_c2(a,6,5,c3,c1,c2);
-	$LD		r5,`5*$BNSZ`(r4)
-	$LD		r6,`6*$BNSZ`(r4)
-	$UMULL		r7,r5,r6
-	$UMULH		r8,r5,r6
-	addc		r11,r7,r11
-	adde		r9,r8,r9
-	addze		r10,r10
-	addc		r11,r7,r11
-	adde		r9,r8,r9
-	addze		r10,r10
-	$ST		r11,`11*$BNSZ`(r3)	#r[11]=c3;
-						#sqr_add_c(a,6,c1,c2,c3);
-	$UMULL		r7,r6,r6
-	$UMULH		r8,r6,r6
-	addc		r9,r7,r9
-	adde		r10,r8,r10
-	addze		r11,r0
-						#sqr_add_c2(a,7,5,c1,c2,c3)
-	$LD		r6,`7*$BNSZ`(r4)
-	$UMULL		r7,r5,r6
-	$UMULH		r8,r5,r6
-	addc		r9,r7,r9
-	adde		r10,r8,r10
-	addze		r11,r11
-	addc		r9,r7,r9
-	adde		r10,r8,r10
-	addze		r11,r11
-	$ST		r9,`12*$BNSZ`(r3)	#r[12]=c1;
-	
-						#sqr_add_c2(a,7,6,c2,c3,c1)
-	$LD		r5,`6*$BNSZ`(r4)
-	$UMULL		r7,r5,r6
-	$UMULH		r8,r5,r6
-	addc		r10,r7,r10
-	adde		r11,r8,r11
-	addze		r9,r0
-	addc		r10,r7,r10
-	adde		r11,r8,r11
-	addze		r9,r9
-	$ST		r10,`13*$BNSZ`(r3)	#r[13]=c2;
-						#sqr_add_c(a,7,c3,c1,c2);
-	$UMULL		r7,r6,r6
-	$UMULH		r8,r6,r6
-	addc		r11,r7,r11
-	adde		r9,r8,r9
-	$ST		r11,`14*$BNSZ`(r3)	#r[14]=c3;
-	$ST		r9, `15*$BNSZ`(r3)	#r[15]=c1;
-
-
-	bclr	BO_ALWAYS,CR0_LT
-
-	.long	0x00000000
-
-#
-#	NOTE:	The following label name should be changed to
-#		"bn_mul_comba4" i.e. remove the first dot
-#		for the gcc compiler. This should be automatically
-#		done in the build
-#
-
-.align	4
-.bn_mul_comba4:
-#
-# This is an optimized version of the bn_mul_comba4 routine.
-#
-# void bn_mul_comba4(BN_ULONG *r, BN_ULONG *a, BN_ULONG *b)
-# r3 contains r
-# r4 contains a
-# r5 contains b
-# r6, r7 are the 2 BN_ULONGs being multiplied.
-# r8, r9 are the results of the 32x32 giving 64 multiply.
-# r10, r11, r12 are the equivalents of c1, c2, and c3.
-#
-	xor	r0,r0,r0		#r0=0. Used in addze below.
-					#mul_add_c(a[0],b[0],c1,c2,c3);
-	$LD	r6,`0*$BNSZ`(r4)		
-	$LD	r7,`0*$BNSZ`(r5)		
-	$UMULL	r10,r6,r7		
-	$UMULH	r11,r6,r7		
-	$ST	r10,`0*$BNSZ`(r3)	#r[0]=c1
-					#mul_add_c(a[0],b[1],c2,c3,c1);
-	$LD	r7,`1*$BNSZ`(r5)		
-	$UMULL	r8,r6,r7
-	$UMULH	r9,r6,r7
-	addc	r11,r8,r11
-	adde	r12,r9,r0
-	addze	r10,r0
-					#mul_add_c(a[1],b[0],c2,c3,c1);
-	$LD	r6, `1*$BNSZ`(r4)		
-	$LD	r7, `0*$BNSZ`(r5)		
-	$UMULL	r8,r6,r7
-	$UMULH	r9,r6,r7
-	addc	r11,r8,r11
-	adde	r12,r9,r12
-	addze	r10,r10
-	$ST	r11,`1*$BNSZ`(r3)	#r[1]=c2
-					#mul_add_c(a[2],b[0],c3,c1,c2);
-	$LD	r6,`2*$BNSZ`(r4)		
-	$UMULL	r8,r6,r7
-	$UMULH	r9,r6,r7
-	addc	r12,r8,r12
-	adde	r10,r9,r10
-	addze	r11,r0
-					#mul_add_c(a[1],b[1],c3,c1,c2);
-	$LD	r6,`1*$BNSZ`(r4)		
-	$LD	r7,`1*$BNSZ`(r5)		
-	$UMULL	r8,r6,r7
-	$UMULH	r9,r6,r7
-	addc	r12,r8,r12
-	adde	r10,r9,r10
-	addze	r11,r11
-					#mul_add_c(a[0],b[2],c3,c1,c2);
-	$LD	r6,`0*$BNSZ`(r4)		
-	$LD	r7,`2*$BNSZ`(r5)		
-	$UMULL	r8,r6,r7
-	$UMULH	r9,r6,r7
-	addc	r12,r8,r12
-	adde	r10,r9,r10
-	addze	r11,r11
-	$ST	r12,`2*$BNSZ`(r3)	#r[2]=c3
-					#mul_add_c(a[0],b[3],c1,c2,c3);
-	$LD	r7,`3*$BNSZ`(r5)		
-	$UMULL	r8,r6,r7
-	$UMULH	r9,r6,r7
-	addc	r10,r8,r10
-	adde	r11,r9,r11
-	addze	r12,r0
-					#mul_add_c(a[1],b[2],c1,c2,c3);
-	$LD	r6,`1*$BNSZ`(r4)
-	$LD	r7,`2*$BNSZ`(r5)
-	$UMULL	r8,r6,r7
-	$UMULH	r9,r6,r7
-	addc	r10,r8,r10
-	adde	r11,r9,r11
-	addze	r12,r12
-					#mul_add_c(a[2],b[1],c1,c2,c3);
-	$LD	r6,`2*$BNSZ`(r4)
-	$LD	r7,`1*$BNSZ`(r5)
-	$UMULL	r8,r6,r7
-	$UMULH	r9,r6,r7
-	addc	r10,r8,r10
-	adde	r11,r9,r11
-	addze	r12,r12
-					#mul_add_c(a[3],b[0],c1,c2,c3);
-	$LD	r6,`3*$BNSZ`(r4)
-	$LD	r7,`0*$BNSZ`(r5)
-	$UMULL	r8,r6,r7
-	$UMULH	r9,r6,r7
-	addc	r10,r8,r10
-	adde	r11,r9,r11
-	addze	r12,r12
-	$ST	r10,`3*$BNSZ`(r3)	#r[3]=c1
-					#mul_add_c(a[3],b[1],c2,c3,c1);
-	$LD	r7,`1*$BNSZ`(r5)		
-	$UMULL	r8,r6,r7
-	$UMULH	r9,r6,r7
-	addc	r11,r8,r11
-	adde	r12,r9,r12
-	addze	r10,r0
-					#mul_add_c(a[2],b[2],c2,c3,c1);
-	$LD	r6,`2*$BNSZ`(r4)
-	$LD	r7,`2*$BNSZ`(r5)
-	$UMULL	r8,r6,r7
-	$UMULH	r9,r6,r7
-	addc	r11,r8,r11
-	adde	r12,r9,r12
-	addze	r10,r10
-					#mul_add_c(a[1],b[3],c2,c3,c1);
-	$LD	r6,`1*$BNSZ`(r4)
-	$LD	r7,`3*$BNSZ`(r5)
-	$UMULL	r8,r6,r7
-	$UMULH	r9,r6,r7
-	addc	r11,r8,r11
-	adde	r12,r9,r12
-	addze	r10,r10
-	$ST	r11,`4*$BNSZ`(r3)	#r[4]=c2
-					#mul_add_c(a[2],b[3],c3,c1,c2);
-	$LD	r6,`2*$BNSZ`(r4)		
-	$UMULL	r8,r6,r7
-	$UMULH	r9,r6,r7
-	addc	r12,r8,r12
-	adde	r10,r9,r10
-	addze	r11,r0
-					#mul_add_c(a[3],b[2],c3,c1,c2);
-	$LD	r6,`3*$BNSZ`(r4)
-	$LD	r7,`2*$BNSZ`(r4)
-	$UMULL	r8,r6,r7
-	$UMULH	r9,r6,r7
-	addc	r12,r8,r12
-	adde	r10,r9,r10
-	addze	r11,r11
-	$ST	r12,`5*$BNSZ`(r3)	#r[5]=c3
-					#mul_add_c(a[3],b[3],c1,c2,c3);
-	$LD	r7,`3*$BNSZ`(r5)		
-	$UMULL	r8,r6,r7
-	$UMULH	r9,r6,r7
-	addc	r10,r8,r10
-	adde	r11,r9,r11
-
-	$ST	r10,`6*$BNSZ`(r3)	#r[6]=c1
-	$ST	r11,`7*$BNSZ`(r3)	#r[7]=c2
-	bclr	BO_ALWAYS,CR0_LT
-	.long	0x00000000
-
-#
-#	NOTE:	The following label name should be changed to
-#		"bn_mul_comba8" i.e. remove the first dot
-#		for the gcc compiler. This should be automatically
-#		done in the build
-#
-	
-.align	4
-.bn_mul_comba8:
-#
-# Optimized version of the bn_mul_comba8 routine.
-#
-# void bn_mul_comba8(BN_ULONG *r, BN_ULONG *a, BN_ULONG *b)
-# r3 contains r
-# r4 contains a
-# r5 contains b
-# r6, r7 are the 2 BN_ULONGs being multiplied.
-# r8, r9 are the results of the 32x32 giving 64 multiply.
-# r10, r11, r12 are the equivalents of c1, c2, and c3.
-#
-	xor	r0,r0,r0		#r0=0. Used in addze below.
-	
-					#mul_add_c(a[0],b[0],c1,c2,c3);
-	$LD	r6,`0*$BNSZ`(r4)	#a[0]
-	$LD	r7,`0*$BNSZ`(r5)	#b[0]
-	$UMULL	r10,r6,r7
-	$UMULH	r11,r6,r7
-	$ST	r10,`0*$BNSZ`(r3)	#r[0]=c1;
-					#mul_add_c(a[0],b[1],c2,c3,c1);
-	$LD	r7,`1*$BNSZ`(r5)
-	$UMULL	r8,r6,r7
-	$UMULH	r9,r6,r7
-	addc	r11,r11,r8
-	addze	r12,r9			# since we didnt set r12 to zero before.
-	addze	r10,r0
-					#mul_add_c(a[1],b[0],c2,c3,c1);
-	$LD	r6,`1*$BNSZ`(r4)
-	$LD	r7,`0*$BNSZ`(r5)
-	$UMULL	r8,r6,r7
-	$UMULH	r9,r6,r7
-	addc	r11,r11,r8
-	adde	r12,r12,r9
-	addze	r10,r10
-	$ST	r11,`1*$BNSZ`(r3)	#r[1]=c2;
-					#mul_add_c(a[2],b[0],c3,c1,c2);
-	$LD	r6,`2*$BNSZ`(r4)
-	$UMULL	r8,r6,r7
-	$UMULH	r9,r6,r7
-	addc	r12,r12,r8
-	adde	r10,r10,r9
-	addze	r11,r0
-					#mul_add_c(a[1],b[1],c3,c1,c2);
-	$LD	r6,`1*$BNSZ`(r4)
-	$LD	r7,`1*$BNSZ`(r5)
-	$UMULL	r8,r6,r7
-	$UMULH	r9,r6,r7
-	addc	r12,r12,r8
-	adde	r10,r10,r9
-	addze	r11,r11
-					#mul_add_c(a[0],b[2],c3,c1,c2);
-	$LD	r6,`0*$BNSZ`(r4)
-	$LD	r7,`2*$BNSZ`(r5)
-	$UMULL	r8,r6,r7
-	$UMULH	r9,r6,r7
-	addc	r12,r12,r8
-	adde	r10,r10,r9
-	addze	r11,r11
-	$ST	r12,`2*$BNSZ`(r3)	#r[2]=c3;
-					#mul_add_c(a[0],b[3],c1,c2,c3);
-	$LD	r7,`3*$BNSZ`(r5)
-	$UMULL	r8,r6,r7
-	$UMULH	r9,r6,r7
-	addc	r10,r10,r8
-	adde	r11,r11,r9
-	addze	r12,r0
-					#mul_add_c(a[1],b[2],c1,c2,c3);
-	$LD	r6,`1*$BNSZ`(r4)
-	$LD	r7,`2*$BNSZ`(r5)
-	$UMULL	r8,r6,r7
-	$UMULH	r9,r6,r7
-	addc	r10,r10,r8
-	adde	r11,r11,r9
-	addze	r12,r12
-		
-					#mul_add_c(a[2],b[1],c1,c2,c3);
-	$LD	r6,`2*$BNSZ`(r4)
-	$LD	r7,`1*$BNSZ`(r5)
-	$UMULL	r8,r6,r7
-	$UMULH	r9,r6,r7
-	addc	r10,r10,r8
-	adde	r11,r11,r9
-	addze	r12,r12
-					#mul_add_c(a[3],b[0],c1,c2,c3);
-	$LD	r6,`3*$BNSZ`(r4)
-	$LD	r7,`0*$BNSZ`(r5)
-	$UMULL	r8,r6,r7
-	$UMULH	r9,r6,r7
-	addc	r10,r10,r8
-	adde	r11,r11,r9
-	addze	r12,r12
-	$ST	r10,`3*$BNSZ`(r3)	#r[3]=c1;
-					#mul_add_c(a[4],b[0],c2,c3,c1);
-	$LD	r6,`4*$BNSZ`(r4)
-	$UMULL	r8,r6,r7
-	$UMULH	r9,r6,r7
-	addc	r11,r11,r8
-	adde	r12,r12,r9
-	addze	r10,r0
-					#mul_add_c(a[3],b[1],c2,c3,c1);
-	$LD	r6,`3*$BNSZ`(r4)
-	$LD	r7,`1*$BNSZ`(r5)
-	$UMULL	r8,r6,r7
-	$UMULH	r9,r6,r7
-	addc	r11,r11,r8
-	adde	r12,r12,r9
-	addze	r10,r10
-					#mul_add_c(a[2],b[2],c2,c3,c1);
-	$LD	r6,`2*$BNSZ`(r4)
-	$LD	r7,`2*$BNSZ`(r5)
-	$UMULL	r8,r6,r7
-	$UMULH	r9,r6,r7
-	addc	r11,r11,r8
-	adde	r12,r12,r9
-	addze	r10,r10
-					#mul_add_c(a[1],b[3],c2,c3,c1);
-	$LD	r6,`1*$BNSZ`(r4)
-	$LD	r7,`3*$BNSZ`(r5)
-	$UMULL	r8,r6,r7
-	$UMULH	r9,r6,r7
-	addc	r11,r11,r8
-	adde	r12,r12,r9
-	addze	r10,r10
-					#mul_add_c(a[0],b[4],c2,c3,c1);
-	$LD	r6,`0*$BNSZ`(r4)
-	$LD	r7,`4*$BNSZ`(r5)
-	$UMULL	r8,r6,r7
-	$UMULH	r9,r6,r7
-	addc	r11,r11,r8
-	adde	r12,r12,r9
-	addze	r10,r10
-	$ST	r11,`4*$BNSZ`(r3)	#r[4]=c2;
-					#mul_add_c(a[0],b[5],c3,c1,c2);
-	$LD	r7,`5*$BNSZ`(r5)
-	$UMULL	r8,r6,r7
-	$UMULH	r9,r6,r7
-	addc	r12,r12,r8
-	adde	r10,r10,r9
-	addze	r11,r0
-					#mul_add_c(a[1],b[4],c3,c1,c2);
-	$LD	r6,`1*$BNSZ`(r4)		
-	$LD	r7,`4*$BNSZ`(r5)
-	$UMULL	r8,r6,r7
-	$UMULH	r9,r6,r7
-	addc	r12,r12,r8
-	adde	r10,r10,r9
-	addze	r11,r11
-					#mul_add_c(a[2],b[3],c3,c1,c2);
-	$LD	r6,`2*$BNSZ`(r4)		
-	$LD	r7,`3*$BNSZ`(r5)
-	$UMULL	r8,r6,r7
-	$UMULH	r9,r6,r7
-	addc	r12,r12,r8
-	adde	r10,r10,r9
-	addze	r11,r11
-					#mul_add_c(a[3],b[2],c3,c1,c2);
-	$LD	r6,`3*$BNSZ`(r4)		
-	$LD	r7,`2*$BNSZ`(r5)
-	$UMULL	r8,r6,r7
-	$UMULH	r9,r6,r7
-	addc	r12,r12,r8
-	adde	r10,r10,r9
-	addze	r11,r11
-					#mul_add_c(a[4],b[1],c3,c1,c2);
-	$LD	r6,`4*$BNSZ`(r4)		
-	$LD	r7,`1*$BNSZ`(r5)
-	$UMULL	r8,r6,r7
-	$UMULH	r9,r6,r7
-	addc	r12,r12,r8
-	adde	r10,r10,r9
-	addze	r11,r11
-					#mul_add_c(a[5],b[0],c3,c1,c2);
-	$LD	r6,`5*$BNSZ`(r4)		
-	$LD	r7,`0*$BNSZ`(r5)
-	$UMULL	r8,r6,r7
-	$UMULH	r9,r6,r7
-	addc	r12,r12,r8
-	adde	r10,r10,r9
-	addze	r11,r11
-	$ST	r12,`5*$BNSZ`(r3)	#r[5]=c3;
-					#mul_add_c(a[6],b[0],c1,c2,c3);
-	$LD	r6,`6*$BNSZ`(r4)
-	$UMULL	r8,r6,r7
-	$UMULH	r9,r6,r7
-	addc	r10,r10,r8
-	adde	r11,r11,r9
-	addze	r12,r0
-					#mul_add_c(a[5],b[1],c1,c2,c3);
-	$LD	r6,`5*$BNSZ`(r4)
-	$LD	r7,`1*$BNSZ`(r5)
-	$UMULL	r8,r6,r7
-	$UMULH	r9,r6,r7
-	addc	r10,r10,r8
-	adde	r11,r11,r9
-	addze	r12,r12
-					#mul_add_c(a[4],b[2],c1,c2,c3);
-	$LD	r6,`4*$BNSZ`(r4)
-	$LD	r7,`2*$BNSZ`(r5)
-	$UMULL	r8,r6,r7
-	$UMULH	r9,r6,r7
-	addc	r10,r10,r8
-	adde	r11,r11,r9
-	addze	r12,r12
-					#mul_add_c(a[3],b[3],c1,c2,c3);
-	$LD	r6,`3*$BNSZ`(r4)
-	$LD	r7,`3*$BNSZ`(r5)
-	$UMULL	r8,r6,r7
-	$UMULH	r9,r6,r7
-	addc	r10,r10,r8
-	adde	r11,r11,r9
-	addze	r12,r12
-					#mul_add_c(a[2],b[4],c1,c2,c3);
-	$LD	r6,`2*$BNSZ`(r4)
-	$LD	r7,`4*$BNSZ`(r5)
-	$UMULL	r8,r6,r7
-	$UMULH	r9,r6,r7
-	addc	r10,r10,r8
-	adde	r11,r11,r9
-	addze	r12,r12
-					#mul_add_c(a[1],b[5],c1,c2,c3);
-	$LD	r6,`1*$BNSZ`(r4)
-	$LD	r7,`5*$BNSZ`(r5)
-	$UMULL	r8,r6,r7
-	$UMULH	r9,r6,r7
-	addc	r10,r10,r8
-	adde	r11,r11,r9
-	addze	r12,r12
-					#mul_add_c(a[0],b[6],c1,c2,c3);
-	$LD	r6,`0*$BNSZ`(r4)
-	$LD	r7,`6*$BNSZ`(r5)
-	$UMULL	r8,r6,r7
-	$UMULH	r9,r6,r7
-	addc	r10,r10,r8
-	adde	r11,r11,r9
-	addze	r12,r12
-	$ST	r10,`6*$BNSZ`(r3)	#r[6]=c1;
-					#mul_add_c(a[0],b[7],c2,c3,c1);
-	$LD	r7,`7*$BNSZ`(r5)
-	$UMULL	r8,r6,r7
-	$UMULH	r9,r6,r7
-	addc	r11,r11,r8
-	adde	r12,r12,r9
-	addze	r10,r0
-					#mul_add_c(a[1],b[6],c2,c3,c1);
-	$LD	r6,`1*$BNSZ`(r4)
-	$LD	r7,`6*$BNSZ`(r5)
-	$UMULL	r8,r6,r7
-	$UMULH	r9,r6,r7
-	addc	r11,r11,r8
-	adde	r12,r12,r9
-	addze	r10,r10
-					#mul_add_c(a[2],b[5],c2,c3,c1);
-	$LD	r6,`2*$BNSZ`(r4)
-	$LD	r7,`5*$BNSZ`(r5)
-	$UMULL	r8,r6,r7
-	$UMULH	r9,r6,r7
-	addc	r11,r11,r8
-	adde	r12,r12,r9
-	addze	r10,r10
-					#mul_add_c(a[3],b[4],c2,c3,c1);
-	$LD	r6,`3*$BNSZ`(r4)
-	$LD	r7,`4*$BNSZ`(r5)
-	$UMULL	r8,r6,r7
-	$UMULH	r9,r6,r7
-	addc	r11,r11,r8
-	adde	r12,r12,r9
-	addze	r10,r10
-					#mul_add_c(a[4],b[3],c2,c3,c1);
-	$LD	r6,`4*$BNSZ`(r4)
-	$LD	r7,`3*$BNSZ`(r5)
-	$UMULL	r8,r6,r7
-	$UMULH	r9,r6,r7
-	addc	r11,r11,r8
-	adde	r12,r12,r9
-	addze	r10,r10
-					#mul_add_c(a[5],b[2],c2,c3,c1);
-	$LD	r6,`5*$BNSZ`(r4)
-	$LD	r7,`2*$BNSZ`(r5)
-	$UMULL	r8,r6,r7
-	$UMULH	r9,r6,r7
-	addc	r11,r11,r8
-	adde	r12,r12,r9
-	addze	r10,r10
-					#mul_add_c(a[6],b[1],c2,c3,c1);
-	$LD	r6,`6*$BNSZ`(r4)
-	$LD	r7,`1*$BNSZ`(r5)
-	$UMULL	r8,r6,r7
-	$UMULH	r9,r6,r7
-	addc	r11,r11,r8
-	adde	r12,r12,r9
-	addze	r10,r10
-					#mul_add_c(a[7],b[0],c2,c3,c1);
-	$LD	r6,`7*$BNSZ`(r4)
-	$LD	r7,`0*$BNSZ`(r5)
-	$UMULL	r8,r6,r7
-	$UMULH	r9,r6,r7
-	addc	r11,r11,r8
-	adde	r12,r12,r9
-	addze	r10,r10
-	$ST	r11,`7*$BNSZ`(r3)	#r[7]=c2;
-					#mul_add_c(a[7],b[1],c3,c1,c2);
-	$LD	r7,`1*$BNSZ`(r5)
-	$UMULL	r8,r6,r7
-	$UMULH	r9,r6,r7
-	addc	r12,r12,r8
-	adde	r10,r10,r9
-	addze	r11,r0
-					#mul_add_c(a[6],b[2],c3,c1,c2);
-	$LD	r6,`6*$BNSZ`(r4)
-	$LD	r7,`2*$BNSZ`(r5)
-	$UMULL	r8,r6,r7
-	$UMULH	r9,r6,r7
-	addc	r12,r12,r8
-	adde	r10,r10,r9
-	addze	r11,r11
-					#mul_add_c(a[5],b[3],c3,c1,c2);
-	$LD	r6,`5*$BNSZ`(r4)
-	$LD	r7,`3*$BNSZ`(r5)
-	$UMULL	r8,r6,r7
-	$UMULH	r9,r6,r7
-	addc	r12,r12,r8
-	adde	r10,r10,r9
-	addze	r11,r11
-					#mul_add_c(a[4],b[4],c3,c1,c2);
-	$LD	r6,`4*$BNSZ`(r4)
-	$LD	r7,`4*$BNSZ`(r5)
-	$UMULL	r8,r6,r7
-	$UMULH	r9,r6,r7
-	addc	r12,r12,r8
-	adde	r10,r10,r9
-	addze	r11,r11
-					#mul_add_c(a[3],b[5],c3,c1,c2);
-	$LD	r6,`3*$BNSZ`(r4)
-	$LD	r7,`5*$BNSZ`(r5)
-	$UMULL	r8,r6,r7
-	$UMULH	r9,r6,r7
-	addc	r12,r12,r8
-	adde	r10,r10,r9
-	addze	r11,r11
-					#mul_add_c(a[2],b[6],c3,c1,c2);
-	$LD	r6,`2*$BNSZ`(r4)
-	$LD	r7,`6*$BNSZ`(r5)
-	$UMULL	r8,r6,r7
-	$UMULH	r9,r6,r7
-	addc	r12,r12,r8
-	adde	r10,r10,r9
-	addze	r11,r11
-					#mul_add_c(a[1],b[7],c3,c1,c2);
-	$LD	r6,`1*$BNSZ`(r4)
-	$LD	r7,`7*$BNSZ`(r5)
-	$UMULL	r8,r6,r7
-	$UMULH	r9,r6,r7
-	addc	r12,r12,r8
-	adde	r10,r10,r9
-	addze	r11,r11
-	$ST	r12,`8*$BNSZ`(r3)	#r[8]=c3;
-					#mul_add_c(a[2],b[7],c1,c2,c3);
-	$LD	r6,`2*$BNSZ`(r4)
-	$UMULL	r8,r6,r7
-	$UMULH	r9,r6,r7
-	addc	r10,r10,r8
-	adde	r11,r11,r9
-	addze	r12,r0
-					#mul_add_c(a[3],b[6],c1,c2,c3);
-	$LD	r6,`3*$BNSZ`(r4)
-	$LD	r7,`6*$BNSZ`(r5)
-	$UMULL	r8,r6,r7
-	$UMULH	r9,r6,r7
-	addc	r10,r10,r8
-	adde	r11,r11,r9
-	addze	r12,r12
-					#mul_add_c(a[4],b[5],c1,c2,c3);
-	$LD	r6,`4*$BNSZ`(r4)
-	$LD	r7,`5*$BNSZ`(r5)
-	$UMULL	r8,r6,r7
-	$UMULH	r9,r6,r7
-	addc	r10,r10,r8
-	adde	r11,r11,r9
-	addze	r12,r12
-					#mul_add_c(a[5],b[4],c1,c2,c3);
-	$LD	r6,`5*$BNSZ`(r4)
-	$LD	r7,`4*$BNSZ`(r5)
-	$UMULL	r8,r6,r7
-	$UMULH	r9,r6,r7
-	addc	r10,r10,r8
-	adde	r11,r11,r9
-	addze	r12,r12
-					#mul_add_c(a[6],b[3],c1,c2,c3);
-	$LD	r6,`6*$BNSZ`(r4)
-	$LD	r7,`3*$BNSZ`(r5)
-	$UMULL	r8,r6,r7
-	$UMULH	r9,r6,r7
-	addc	r10,r10,r8
-	adde	r11,r11,r9
-	addze	r12,r12
-					#mul_add_c(a[7],b[2],c1,c2,c3);
-	$LD	r6,`7*$BNSZ`(r4)
-	$LD	r7,`2*$BNSZ`(r5)
-	$UMULL	r8,r6,r7
-	$UMULH	r9,r6,r7
-	addc	r10,r10,r8
-	adde	r11,r11,r9
-	addze	r12,r12
-	$ST	r10,`9*$BNSZ`(r3)	#r[9]=c1;
-					#mul_add_c(a[7],b[3],c2,c3,c1);
-	$LD	r7,`3*$BNSZ`(r5)
-	$UMULL	r8,r6,r7
-	$UMULH	r9,r6,r7
-	addc	r11,r11,r8
-	adde	r12,r12,r9
-	addze	r10,r0
-					#mul_add_c(a[6],b[4],c2,c3,c1);
-	$LD	r6,`6*$BNSZ`(r4)
-	$LD	r7,`4*$BNSZ`(r5)
-	$UMULL	r8,r6,r7
-	$UMULH	r9,r6,r7
-	addc	r11,r11,r8
-	adde	r12,r12,r9
-	addze	r10,r10
-					#mul_add_c(a[5],b[5],c2,c3,c1);
-	$LD	r6,`5*$BNSZ`(r4)
-	$LD	r7,`5*$BNSZ`(r5)
-	$UMULL	r8,r6,r7
-	$UMULH	r9,r6,r7
-	addc	r11,r11,r8
-	adde	r12,r12,r9
-	addze	r10,r10
-					#mul_add_c(a[4],b[6],c2,c3,c1);
-	$LD	r6,`4*$BNSZ`(r4)
-	$LD	r7,`6*$BNSZ`(r5)
-	$UMULL	r8,r6,r7
-	$UMULH	r9,r6,r7
-	addc	r11,r11,r8
-	adde	r12,r12,r9
-	addze	r10,r10
-					#mul_add_c(a[3],b[7],c2,c3,c1);
-	$LD	r6,`3*$BNSZ`(r4)
-	$LD	r7,`7*$BNSZ`(r5)
-	$UMULL	r8,r6,r7
-	$UMULH	r9,r6,r7
-	addc	r11,r11,r8
-	adde	r12,r12,r9
-	addze	r10,r10
-	$ST	r11,`10*$BNSZ`(r3)	#r[10]=c2;
-					#mul_add_c(a[4],b[7],c3,c1,c2);
-	$LD	r6,`4*$BNSZ`(r4)
-	$UMULL	r8,r6,r7
-	$UMULH	r9,r6,r7
-	addc	r12,r12,r8
-	adde	r10,r10,r9
-	addze	r11,r0
-					#mul_add_c(a[5],b[6],c3,c1,c2);
-	$LD	r6,`5*$BNSZ`(r4)
-	$LD	r7,`6*$BNSZ`(r5)
-	$UMULL	r8,r6,r7
-	$UMULH	r9,r6,r7
-	addc	r12,r12,r8
-	adde	r10,r10,r9
-	addze	r11,r11
-					#mul_add_c(a[6],b[5],c3,c1,c2);
-	$LD	r6,`6*$BNSZ`(r4)
-	$LD	r7,`5*$BNSZ`(r5)
-	$UMULL	r8,r6,r7
-	$UMULH	r9,r6,r7
-	addc	r12,r12,r8
-	adde	r10,r10,r9
-	addze	r11,r11
-					#mul_add_c(a[7],b[4],c3,c1,c2);
-	$LD	r6,`7*$BNSZ`(r4)
-	$LD	r7,`4*$BNSZ`(r5)
-	$UMULL	r8,r6,r7
-	$UMULH	r9,r6,r7
-	addc	r12,r12,r8
-	adde	r10,r10,r9
-	addze	r11,r11
-	$ST	r12,`11*$BNSZ`(r3)	#r[11]=c3;
-					#mul_add_c(a[7],b[5],c1,c2,c3);
-	$LD	r7,`5*$BNSZ`(r5)
-	$UMULL	r8,r6,r7
-	$UMULH	r9,r6,r7
-	addc	r10,r10,r8
-	adde	r11,r11,r9
-	addze	r12,r0
-					#mul_add_c(a[6],b[6],c1,c2,c3);
-	$LD	r6,`6*$BNSZ`(r4)
-	$LD	r7,`6*$BNSZ`(r5)
-	$UMULL	r8,r6,r7
-	$UMULH	r9,r6,r7
-	addc	r10,r10,r8
-	adde	r11,r11,r9
-	addze	r12,r12
-					#mul_add_c(a[5],b[7],c1,c2,c3);
-	$LD	r6,`5*$BNSZ`(r4)
-	$LD	r7,`7*$BNSZ`(r5)
-	$UMULL	r8,r6,r7
-	$UMULH	r9,r6,r7
-	addc	r10,r10,r8
-	adde	r11,r11,r9
-	addze	r12,r12
-	$ST	r10,`12*$BNSZ`(r3)	#r[12]=c1;
-					#mul_add_c(a[6],b[7],c2,c3,c1);
-	$LD	r6,`6*$BNSZ`(r4)
-	$UMULL	r8,r6,r7
-	$UMULH	r9,r6,r7
-	addc	r11,r11,r8
-	adde	r12,r12,r9
-	addze	r10,r0
-					#mul_add_c(a[7],b[6],c2,c3,c1);
-	$LD	r6,`7*$BNSZ`(r4)
-	$LD	r7,`6*$BNSZ`(r5)
-	$UMULL	r8,r6,r7
-	$UMULH	r9,r6,r7
-	addc	r11,r11,r8
-	adde	r12,r12,r9
-	addze	r10,r10
-	$ST	r11,`13*$BNSZ`(r3)	#r[13]=c2;
-					#mul_add_c(a[7],b[7],c3,c1,c2);
-	$LD	r7,`7*$BNSZ`(r5)
-	$UMULL	r8,r6,r7
-	$UMULH	r9,r6,r7
-	addc	r12,r12,r8
-	adde	r10,r10,r9
-	$ST	r12,`14*$BNSZ`(r3)	#r[14]=c3;
-	$ST	r10,`15*$BNSZ`(r3)	#r[15]=c1;
-	bclr	BO_ALWAYS,CR0_LT
-	.long	0x00000000
-
-#
-#	NOTE:	The following label name should be changed to
-#		"bn_sub_words" i.e. remove the first dot
-#		for the gcc compiler. This should be automatically
-#		done in the build
-#
-#
-.align	4
-.bn_sub_words:
-#
-#	Handcoded version of bn_sub_words
-#
-#BN_ULONG bn_sub_words(BN_ULONG *r, BN_ULONG *a, BN_ULONG *b, int n)
-#
-#	r3 = r
-#	r4 = a
-#	r5 = b
-#	r6 = n
-#
-#       Note:	No loop unrolling done since this is not a performance
-#               critical loop.
-
-	xor	r0,r0,r0	#set r0 = 0
-#
-#	check for r6 = 0 AND set carry bit.
-#
-	subfc.	r7,r0,r6        # If r6 is 0 then result is 0.
-				# if r6 > 0 then result !=0
-				# In either case carry bit is set.
-	bc	BO_IF,CR0_EQ,Lppcasm_sub_adios
-	addi	r4,r4,-$BNSZ
-	addi	r3,r3,-$BNSZ
-	addi	r5,r5,-$BNSZ
-	mtctr	r6
-Lppcasm_sub_mainloop:	
-	$LDU	r7,$BNSZ(r4)
-	$LDU	r8,$BNSZ(r5)
-	subfe	r6,r8,r7	# r6 = r7+carry bit + onescomplement(r8)
-				# if carry = 1 this is r7-r8. Else it
-				# is r7-r8 -1 as we need.
-	$STU	r6,$BNSZ(r3)
-	bc	BO_dCTR_NZERO,CR0_EQ,Lppcasm_sub_mainloop
-Lppcasm_sub_adios:	
-	subfze	r3,r0		# if carry bit is set then r3 = 0 else -1
-	andi.	r3,r3,1         # keep only last bit.
-	bclr	BO_ALWAYS,CR0_LT
-	.long	0x00000000
-
-
-#
-#	NOTE:	The following label name should be changed to
-#		"bn_add_words" i.e. remove the first dot
-#		for the gcc compiler. This should be automatically
-#		done in the build
-#
-
-.align	4
-.bn_add_words:
-#
-#	Handcoded version of bn_add_words
-#
-#BN_ULONG bn_add_words(BN_ULONG *r, BN_ULONG *a, BN_ULONG *b, int n)
-#
-#	r3 = r
-#	r4 = a
-#	r5 = b
-#	r6 = n
-#
-#       Note:	No loop unrolling done since this is not a performance
-#               critical loop.
-
-	xor	r0,r0,r0
-#
-#	check for r6 = 0. Is this needed?
-#
-	addic.	r6,r6,0		#test r6 and clear carry bit.
-	bc	BO_IF,CR0_EQ,Lppcasm_add_adios
-	addi	r4,r4,-$BNSZ
-	addi	r3,r3,-$BNSZ
-	addi	r5,r5,-$BNSZ
-	mtctr	r6
-Lppcasm_add_mainloop:	
-	$LDU	r7,$BNSZ(r4)
-	$LDU	r8,$BNSZ(r5)
-	adde	r8,r7,r8
-	$STU	r8,$BNSZ(r3)
-	bc	BO_dCTR_NZERO,CR0_EQ,Lppcasm_add_mainloop
-Lppcasm_add_adios:	
-	addze	r3,r0			#return carry bit.
-	bclr	BO_ALWAYS,CR0_LT
-	.long	0x00000000
-
-#
-#	NOTE:	The following label name should be changed to
-#		"bn_div_words" i.e. remove the first dot
-#		for the gcc compiler. This should be automatically
-#		done in the build
-#
-
-.align	4
-.bn_div_words:
-#
-#	This is a cleaned up version of code generated by
-#	the AIX compiler. The only optimization is to use
-#	the PPC instruction to count leading zeros instead
-#	of call to num_bits_word. Since this was compiled
-#	only at level -O2 we can possibly squeeze it more?
-#	
-#	r3 = h
-#	r4 = l
-#	r5 = d
-	
-	$UCMPI	0,r5,0			# compare r5 and 0
-	bc	BO_IF_NOT,CR0_EQ,Lppcasm_div1	# proceed if d!=0
-	li	r3,-1			# d=0 return -1
-	bclr	BO_ALWAYS,CR0_LT	
-Lppcasm_div1:
-	xor	r0,r0,r0		#r0=0
-	li	r8,$BITS
-	$CNTLZ.	r7,r5			#r7 = num leading 0s in d.
-	bc	BO_IF,CR0_EQ,Lppcasm_div2	#proceed if no leading zeros
-	subf	r8,r7,r8		#r8 = BN_num_bits_word(d)
-	$SHR.	r9,r3,r8		#are there any bits above r8'th?
-	$TR	16,r9,r0		#if there're, signal to dump core...
-Lppcasm_div2:
-	$UCMP	0,r3,r5			#h>=d?
-	bc	BO_IF,CR0_LT,Lppcasm_div3	#goto Lppcasm_div3 if not
-	subf	r3,r5,r3		#h-=d ; 
-Lppcasm_div3:				#r7 = BN_BITS2-i. so r7=i
-	cmpi	0,0,r7,0		# is (i == 0)?
-	bc	BO_IF,CR0_EQ,Lppcasm_div4
-	$SHL	r3,r3,r7		# h = (h<< i)
-	$SHR	r8,r4,r8		# r8 = (l >> BN_BITS2 -i)
-	$SHL	r5,r5,r7		# d<<=i
-	or	r3,r3,r8		# h = (h<<i)|(l>>(BN_BITS2-i))
-	$SHL	r4,r4,r7		# l <<=i
-Lppcasm_div4:
-	$SHRI	r9,r5,`$BITS/2`		# r9 = dh
-					# dl will be computed when needed
-					# as it saves registers.
-	li	r6,2			#r6=2
-	mtctr	r6			#counter will be in count.
-Lppcasm_divouterloop: 
-	$SHRI	r8,r3,`$BITS/2`		#r8 = (h>>BN_BITS4)
-	$SHRI	r11,r4,`$BITS/2`	#r11= (l&BN_MASK2h)>>BN_BITS4
-					# compute here for innerloop.
-	$UCMP	0,r8,r9			# is (h>>BN_BITS4)==dh
-	bc	BO_IF_NOT,CR0_EQ,Lppcasm_div5	# goto Lppcasm_div5 if not
-
-	li	r8,-1
-	$CLRU	r8,r8,`$BITS/2`		#q = BN_MASK2l 
-	b	Lppcasm_div6
-Lppcasm_div5:
-	$UDIV	r8,r3,r9		#q = h/dh
-Lppcasm_div6:
-	$UMULL	r12,r9,r8		#th = q*dh
-	$CLRU	r10,r5,`$BITS/2`	#r10=dl
-	$UMULL	r6,r8,r10		#tl = q*dl
-	
-Lppcasm_divinnerloop:
-	subf	r10,r12,r3		#t = h -th
-	$SHRI	r7,r10,`$BITS/2`	#r7= (t &BN_MASK2H), sort of...
-	addic.	r7,r7,0			#test if r7 == 0. used below.
-					# now want to compute
-					# r7 = (t<<BN_BITS4)|((l&BN_MASK2h)>>BN_BITS4)
-					# the following 2 instructions do that
-	$SHLI	r7,r10,`$BITS/2`	# r7 = (t<<BN_BITS4)
-	or	r7,r7,r11		# r7|=((l&BN_MASK2h)>>BN_BITS4)
-	$UCMP	1,r6,r7			# compare (tl <= r7)
-	bc	BO_IF_NOT,CR0_EQ,Lppcasm_divinnerexit
-	bc	BO_IF_NOT,CR1_FEX,Lppcasm_divinnerexit
-	addi	r8,r8,-1		#q--
-	subf	r12,r9,r12		#th -=dh
-	$CLRU	r10,r5,`$BITS/2`	#r10=dl. t is no longer needed in loop.
-	subf	r6,r10,r6		#tl -=dl
-	b	Lppcasm_divinnerloop
-Lppcasm_divinnerexit:
-	$SHRI	r10,r6,`$BITS/2`	#t=(tl>>BN_BITS4)
-	$SHLI	r11,r6,`$BITS/2`	#tl=(tl<<BN_BITS4)&BN_MASK2h;
-	$UCMP	1,r4,r11		# compare l and tl
-	add	r12,r12,r10		# th+=t
-	bc	BO_IF_NOT,CR1_FX,Lppcasm_div7  # if (l>=tl) goto Lppcasm_div7
-	addi	r12,r12,1		# th++
-Lppcasm_div7:
-	subf	r11,r11,r4		#r11=l-tl
-	$UCMP	1,r3,r12		#compare h and th
-	bc	BO_IF_NOT,CR1_FX,Lppcasm_div8	#if (h>=th) goto Lppcasm_div8
-	addi	r8,r8,-1		# q--
-	add	r3,r5,r3		# h+=d
-Lppcasm_div8:
-	subf	r12,r12,r3		#r12 = h-th
-	$SHLI	r4,r11,`$BITS/2`	#l=(l&BN_MASK2l)<<BN_BITS4
-					# want to compute
-					# h = ((h<<BN_BITS4)|(l>>BN_BITS4))&BN_MASK2
-					# the following 2 instructions will do this.
-	$INSR	r11,r12,`$BITS/2`,`$BITS/2`	# r11 is the value we want rotated $BITS/2.
-	$ROTL	r3,r11,`$BITS/2`	# rotate by $BITS/2 and store in r3
-	bc	BO_dCTR_ZERO,CR0_EQ,Lppcasm_div9#if (count==0) break ;
-	$SHLI	r0,r8,`$BITS/2`		#ret =q<<BN_BITS4
-	b	Lppcasm_divouterloop
-Lppcasm_div9:
-	or	r3,r8,r0
-	bclr	BO_ALWAYS,CR0_LT
-	.long	0x00000000
-
-#
-#	NOTE:	The following label name should be changed to
-#		"bn_sqr_words" i.e. remove the first dot
-#		for the gcc compiler. This should be automatically
-#		done in the build
-#
-.align	4
-.bn_sqr_words:
-#
-#	Optimized version of bn_sqr_words
-#
-#	void bn_sqr_words(BN_ULONG *r, BN_ULONG *a, int n)
-#
-#	r3 = r
-#	r4 = a
-#	r5 = n
-#
-#	r6 = a[i].
-#	r7,r8 = product.
-#
-#	No unrolling done here. Not performance critical.
-
-	addic.	r5,r5,0			#test r5.
-	bc	BO_IF,CR0_EQ,Lppcasm_sqr_adios
-	addi	r4,r4,-$BNSZ
-	addi	r3,r3,-$BNSZ
-	mtctr	r5
-Lppcasm_sqr_mainloop:	
-					#sqr(r[0],r[1],a[0]);
-	$LDU	r6,$BNSZ(r4)
-	$UMULL	r7,r6,r6
-	$UMULH  r8,r6,r6
-	$STU	r7,$BNSZ(r3)
-	$STU	r8,$BNSZ(r3)
-	bc	BO_dCTR_NZERO,CR0_EQ,Lppcasm_sqr_mainloop
-Lppcasm_sqr_adios:	
-	bclr	BO_ALWAYS,CR0_LT
-	.long	0x00000000
-
-
-#
-#	NOTE:	The following label name should be changed to
-#		"bn_mul_words" i.e. remove the first dot
-#		for the gcc compiler. This should be automatically
-#		done in the build
-#
-
-.align	4	
-.bn_mul_words:
-#
-# BN_ULONG bn_mul_words(BN_ULONG *rp, BN_ULONG *ap, int num, BN_ULONG w)
-#
-# r3 = rp
-# r4 = ap
-# r5 = num
-# r6 = w
-	xor	r0,r0,r0
-	xor	r12,r12,r12		# used for carry
-	rlwinm.	r7,r5,30,2,31		# num >> 2
-	bc	BO_IF,CR0_EQ,Lppcasm_mw_REM
-	mtctr	r7
-Lppcasm_mw_LOOP:	
-					#mul(rp[0],ap[0],w,c1);
-	$LD	r8,`0*$BNSZ`(r4)
-	$UMULL	r9,r6,r8
-	$UMULH  r10,r6,r8
-	addc	r9,r9,r12
-	#addze	r10,r10			#carry is NOT ignored.
-					#will be taken care of
-					#in second spin below
-					#using adde.
-	$ST	r9,`0*$BNSZ`(r3)
-					#mul(rp[1],ap[1],w,c1);
-	$LD	r8,`1*$BNSZ`(r4)	
-	$UMULL	r11,r6,r8
-	$UMULH  r12,r6,r8
-	adde	r11,r11,r10
-	#addze	r12,r12
-	$ST	r11,`1*$BNSZ`(r3)
-					#mul(rp[2],ap[2],w,c1);
-	$LD	r8,`2*$BNSZ`(r4)
-	$UMULL	r9,r6,r8
-	$UMULH  r10,r6,r8
-	adde	r9,r9,r12
-	#addze	r10,r10
-	$ST	r9,`2*$BNSZ`(r3)
-					#mul_add(rp[3],ap[3],w,c1);
-	$LD	r8,`3*$BNSZ`(r4)
-	$UMULL	r11,r6,r8
-	$UMULH  r12,r6,r8
-	adde	r11,r11,r10
-	addze	r12,r12			#this spin we collect carry into
-					#r12
-	$ST	r11,`3*$BNSZ`(r3)
-	
-	addi	r3,r3,`4*$BNSZ`
-	addi	r4,r4,`4*$BNSZ`
-	bc	BO_dCTR_NZERO,CR0_EQ,Lppcasm_mw_LOOP
-
-Lppcasm_mw_REM:
-	andi.	r5,r5,0x3
-	bc	BO_IF,CR0_EQ,Lppcasm_mw_OVER
-					#mul(rp[0],ap[0],w,c1);
-	$LD	r8,`0*$BNSZ`(r4)
-	$UMULL	r9,r6,r8
-	$UMULH  r10,r6,r8
-	addc	r9,r9,r12
-	addze	r10,r10
-	$ST	r9,`0*$BNSZ`(r3)
-	addi	r12,r10,0
-	
-	addi	r5,r5,-1
-	cmpli	0,0,r5,0
-	bc	BO_IF,CR0_EQ,Lppcasm_mw_OVER
-
-	
-					#mul(rp[1],ap[1],w,c1);
-	$LD	r8,`1*$BNSZ`(r4)	
-	$UMULL	r9,r6,r8
-	$UMULH  r10,r6,r8
-	addc	r9,r9,r12
-	addze	r10,r10
-	$ST	r9,`1*$BNSZ`(r3)
-	addi	r12,r10,0
-	
-	addi	r5,r5,-1
-	cmpli	0,0,r5,0
-	bc	BO_IF,CR0_EQ,Lppcasm_mw_OVER
-	
-					#mul_add(rp[2],ap[2],w,c1);
-	$LD	r8,`2*$BNSZ`(r4)
-	$UMULL	r9,r6,r8
-	$UMULH  r10,r6,r8
-	addc	r9,r9,r12
-	addze	r10,r10
-	$ST	r9,`2*$BNSZ`(r3)
-	addi	r12,r10,0
-		
-Lppcasm_mw_OVER:	
-	addi	r3,r12,0
-	bclr	BO_ALWAYS,CR0_LT
-	.long	0x00000000
-
-#
-#	NOTE:	The following label name should be changed to
-#		"bn_mul_add_words" i.e. remove the first dot
-#		for the gcc compiler. This should be automatically
-#		done in the build
-#
-
-.align	4
-.bn_mul_add_words:
-#
-# BN_ULONG bn_mul_add_words(BN_ULONG *rp, BN_ULONG *ap, int num, BN_ULONG w)
-#
-# r3 = rp
-# r4 = ap
-# r5 = num
-# r6 = w
-#
-# empirical evidence suggests that unrolled version performs best!!
-#
-	xor	r0,r0,r0		#r0 = 0
-	xor	r12,r12,r12  		#r12 = 0 . used for carry		
-	rlwinm.	r7,r5,30,2,31		# num >> 2
-	bc	BO_IF,CR0_EQ,Lppcasm_maw_leftover	# if (num < 4) go LPPCASM_maw_leftover
-	mtctr	r7
-Lppcasm_maw_mainloop:	
-					#mul_add(rp[0],ap[0],w,c1);
-	$LD	r8,`0*$BNSZ`(r4)
-	$LD	r11,`0*$BNSZ`(r3)
-	$UMULL	r9,r6,r8
-	$UMULH  r10,r6,r8
-	addc	r9,r9,r12		#r12 is carry.
-	addze	r10,r10
-	addc	r9,r9,r11
-	#addze	r10,r10
-					#the above instruction addze
-					#is NOT needed. Carry will NOT
-					#be ignored. It's not affected
-					#by multiply and will be collected
-					#in the next spin
-	$ST	r9,`0*$BNSZ`(r3)
-	
-					#mul_add(rp[1],ap[1],w,c1);
-	$LD	r8,`1*$BNSZ`(r4)	
-	$LD	r9,`1*$BNSZ`(r3)
-	$UMULL	r11,r6,r8
-	$UMULH  r12,r6,r8
-	adde	r11,r11,r10		#r10 is carry.
-	addze	r12,r12
-	addc	r11,r11,r9
-	#addze	r12,r12
-	$ST	r11,`1*$BNSZ`(r3)
-	
-					#mul_add(rp[2],ap[2],w,c1);
-	$LD	r8,`2*$BNSZ`(r4)
-	$UMULL	r9,r6,r8
-	$LD	r11,`2*$BNSZ`(r3)
-	$UMULH  r10,r6,r8
-	adde	r9,r9,r12
-	addze	r10,r10
-	addc	r9,r9,r11
-	#addze	r10,r10
-	$ST	r9,`2*$BNSZ`(r3)
-	
-					#mul_add(rp[3],ap[3],w,c1);
-	$LD	r8,`3*$BNSZ`(r4)
-	$UMULL	r11,r6,r8
-	$LD	r9,`3*$BNSZ`(r3)
-	$UMULH  r12,r6,r8
-	adde	r11,r11,r10
-	addze	r12,r12
-	addc	r11,r11,r9
-	addze	r12,r12
-	$ST	r11,`3*$BNSZ`(r3)
-	addi	r3,r3,`4*$BNSZ`
-	addi	r4,r4,`4*$BNSZ`
-	bc	BO_dCTR_NZERO,CR0_EQ,Lppcasm_maw_mainloop
-	
-Lppcasm_maw_leftover:
-	andi.	r5,r5,0x3
-	bc	BO_IF,CR0_EQ,Lppcasm_maw_adios
-	addi	r3,r3,-$BNSZ
-	addi	r4,r4,-$BNSZ
-					#mul_add(rp[0],ap[0],w,c1);
-	mtctr	r5
-	$LDU	r8,$BNSZ(r4)
-	$UMULL	r9,r6,r8
-	$UMULH  r10,r6,r8
-	$LDU	r11,$BNSZ(r3)
-	addc	r9,r9,r11
-	addze	r10,r10
-	addc	r9,r9,r12
-	addze	r12,r10
-	$ST	r9,0(r3)
-	
-	bc	BO_dCTR_ZERO,CR0_EQ,Lppcasm_maw_adios
-					#mul_add(rp[1],ap[1],w,c1);
-	$LDU	r8,$BNSZ(r4)	
-	$UMULL	r9,r6,r8
-	$UMULH  r10,r6,r8
-	$LDU	r11,$BNSZ(r3)
-	addc	r9,r9,r11
-	addze	r10,r10
-	addc	r9,r9,r12
-	addze	r12,r10
-	$ST	r9,0(r3)
-	
-	bc	BO_dCTR_ZERO,CR0_EQ,Lppcasm_maw_adios
-					#mul_add(rp[2],ap[2],w,c1);
-	$LDU	r8,$BNSZ(r4)
-	$UMULL	r9,r6,r8
-	$UMULH  r10,r6,r8
-	$LDU	r11,$BNSZ(r3)
-	addc	r9,r9,r11
-	addze	r10,r10
-	addc	r9,r9,r12
-	addze	r12,r10
-	$ST	r9,0(r3)
-		
-Lppcasm_maw_adios:	
-	addi	r3,r12,0
-	bclr	BO_ALWAYS,CR0_LT
-	.long	0x00000000
-	.align	4
-EOF
-	$data =~ s/\`([^\`]*)\`/eval $1/gem;
-
-	# if some assembler chokes on some simplified mnemonic,
-	# this is the spot to fix it up, e.g.:
-	# GNU as doesn't seem to accept cmplw, 32-bit unsigned compare
-	$data =~ s/^(\s*)cmplw(\s+)([^,]+),(.*)/$1cmpl$2$3,0,$4/gm;
-	# assembler X doesn't accept li, load immediate value
-	#$data =~ s/^(\s*)li(\s+)([^,]+),(.*)/$1addi$2$3,0,$4/gm;
-	return($data);
-}
diff --git a/crypto/openssl/crypto/bn/asm/r3000.s b/crypto/openssl/crypto/bn/asm/r3000.s
deleted file mode 100644
index e95269afa381..000000000000
--- a/crypto/openssl/crypto/bn/asm/r3000.s
+++ /dev/null
@@ -1,646 +0,0 @@
-	.file	1 "../bn_mulw.c"
-	.set	nobopt
-	.option pic2
-
- # GNU C 2.6.3 [AL 1.1, MM 40] SGI running IRIX 5.0 compiled by GNU C
-
- # Cc1 defaults:
- # -mabicalls
-
- # Cc1 arguments (-G value = 0, Cpu = 3000, ISA = 1):
- # -quiet -dumpbase -O2 -o
-
-gcc2_compiled.:
-__gnu_compiled_c:
-	.rdata
-
-	.byte	0x24,0x52,0x65,0x76,0x69,0x73,0x69,0x6f
-	.byte	0x6e,0x3a,0x20,0x31,0x2e,0x34,0x39,0x20
-	.byte	0x24,0x0
-
-	.byte	0x24,0x52,0x65,0x76,0x69,0x73,0x69,0x6f
-	.byte	0x6e,0x3a,0x20,0x31,0x2e,0x33,0x34,0x20
-	.byte	0x24,0x0
-
-	.byte	0x24,0x52,0x65,0x76,0x69,0x73,0x69,0x6f
-	.byte	0x6e,0x3a,0x20,0x31,0x2e,0x35,0x20,0x24
-	.byte	0x0
-
-	.byte	0x24,0x52,0x65,0x76,0x69,0x73,0x69,0x6f
-	.byte	0x6e,0x3a,0x20,0x31,0x2e,0x38,0x20,0x24
-	.byte	0x0
-
-	.byte	0x24,0x52,0x65,0x76,0x69,0x73,0x69,0x6f
-	.byte	0x6e,0x3a,0x20,0x31,0x2e,0x32,0x33,0x20
-	.byte	0x24,0x0
-
-	.byte	0x24,0x52,0x65,0x76,0x69,0x73,0x69,0x6f
-	.byte	0x6e,0x3a,0x20,0x31,0x2e,0x37,0x38,0x20
-	.byte	0x24,0x0
-
-	.byte	0x24,0x52,0x65,0x76,0x69,0x73,0x69,0x6f
-	.byte	0x6e,0x3a,0x20,0x33,0x2e,0x37,0x30,0x20
-	.byte	0x24,0x0
-
-	.byte	0x24,0x52,0x65,0x76,0x69,0x73,0x69,0x6f
-	.byte	0x6e,0x3a,0x20,0x31,0x2e,0x32,0x20,0x24
-	.byte	0x0
-
-	.byte	0x24,0x52,0x65,0x76,0x69,0x73,0x69,0x6f
-	.byte	0x6e,0x3a,0x20,0x31,0x2e,0x34,0x20,0x24
-	.byte	0x0
-
-	.byte	0x24,0x52,0x65,0x76,0x69,0x73,0x69,0x6f
-	.byte	0x6e,0x3a,0x20,0x31,0x2e,0x38,0x20,0x24
-	.byte	0x0
-	.text
-	.align	2
-	.globl	bn_mul_add_words
-	.ent	bn_mul_add_words
-bn_mul_add_words:
-	.frame	$sp,0,$31		# vars= 0, regs= 0/0, args= 0, extra= 0
-	.mask	0x00000000,0
-	.fmask	0x00000000,0
-	.set	noreorder
-	.cpload	$25
-	.set	reorder
-	move	$12,$4
-	move	$14,$5
-	move	$9,$6
-	move	$13,$7
-	move	$8,$0
-	addu	$10,$12,12
-	addu	$11,$14,12
-$L2:
-	lw	$6,0($14)
-	#nop
-	multu	$13,$6
-	mfhi	$6
-	mflo	$7
-	#nop
-	move	$5,$8
-	move	$4,$0
-	lw	$3,0($12)
-	addu	$9,$9,-1
-	move	$2,$0
-	addu	$7,$7,$3
-	sltu	$8,$7,$3
-	addu	$6,$6,$2
-	addu	$6,$6,$8
-	addu	$7,$7,$5
-	sltu	$2,$7,$5
-	addu	$6,$6,$4
-	addu	$6,$6,$2
-	srl	$3,$6,0
-	move	$2,$0
-	move	$8,$3
-	.set	noreorder
-	.set	nomacro
-	beq	$9,$0,$L3
-	sw	$7,0($12)
-	.set	macro
-	.set	reorder
-
-	lw	$6,-8($11)
-	#nop
-	multu	$13,$6
-	mfhi	$6
-	mflo	$7
-	#nop
-	move	$5,$8
-	move	$4,$0
-	lw	$3,-8($10)
-	addu	$9,$9,-1
-	move	$2,$0
-	addu	$7,$7,$3
-	sltu	$8,$7,$3
-	addu	$6,$6,$2
-	addu	$6,$6,$8
-	addu	$7,$7,$5
-	sltu	$2,$7,$5
-	addu	$6,$6,$4
-	addu	$6,$6,$2
-	srl	$3,$6,0
-	move	$2,$0
-	move	$8,$3
-	.set	noreorder
-	.set	nomacro
-	beq	$9,$0,$L3
-	sw	$7,-8($10)
-	.set	macro
-	.set	reorder
-
-	lw	$6,-4($11)
-	#nop
-	multu	$13,$6
-	mfhi	$6
-	mflo	$7
-	#nop
-	move	$5,$8
-	move	$4,$0
-	lw	$3,-4($10)
-	addu	$9,$9,-1
-	move	$2,$0
-	addu	$7,$7,$3
-	sltu	$8,$7,$3
-	addu	$6,$6,$2
-	addu	$6,$6,$8
-	addu	$7,$7,$5
-	sltu	$2,$7,$5
-	addu	$6,$6,$4
-	addu	$6,$6,$2
-	srl	$3,$6,0
-	move	$2,$0
-	move	$8,$3
-	.set	noreorder
-	.set	nomacro
-	beq	$9,$0,$L3
-	sw	$7,-4($10)
-	.set	macro
-	.set	reorder
-
-	lw	$6,0($11)
-	#nop
-	multu	$13,$6
-	mfhi	$6
-	mflo	$7
-	#nop
-	move	$5,$8
-	move	$4,$0
-	lw	$3,0($10)
-	addu	$9,$9,-1
-	move	$2,$0
-	addu	$7,$7,$3
-	sltu	$8,$7,$3
-	addu	$6,$6,$2
-	addu	$6,$6,$8
-	addu	$7,$7,$5
-	sltu	$2,$7,$5
-	addu	$6,$6,$4
-	addu	$6,$6,$2
-	srl	$3,$6,0
-	move	$2,$0
-	move	$8,$3
-	.set	noreorder
-	.set	nomacro
-	beq	$9,$0,$L3
-	sw	$7,0($10)
-	.set	macro
-	.set	reorder
-
-	addu	$11,$11,16
-	addu	$14,$14,16
-	addu	$10,$10,16
-	.set	noreorder
-	.set	nomacro
-	j	$L2
-	addu	$12,$12,16
-	.set	macro
-	.set	reorder
-
-$L3:
-	.set	noreorder
-	.set	nomacro
-	j	$31
-	move	$2,$8
-	.set	macro
-	.set	reorder
-
-	.end	bn_mul_add_words
-	.align	2
-	.globl	bn_mul_words
-	.ent	bn_mul_words
-bn_mul_words:
-	.frame	$sp,0,$31		# vars= 0, regs= 0/0, args= 0, extra= 0
-	.mask	0x00000000,0
-	.fmask	0x00000000,0
-	.set	noreorder
-	.cpload	$25
-	.set	reorder
-	move	$11,$4
-	move	$12,$5
-	move	$8,$6
-	move	$6,$0
-	addu	$10,$11,12
-	addu	$9,$12,12
-$L10:
-	lw	$4,0($12)
-	#nop
-	multu	$7,$4
-	mfhi	$4
-	mflo	$5
-	#nop
-	move	$3,$6
-	move	$2,$0
-	addu	$8,$8,-1
-	addu	$5,$5,$3
-	sltu	$6,$5,$3
-	addu	$4,$4,$2
-	addu	$4,$4,$6
-	srl	$3,$4,0
-	move	$2,$0
-	move	$6,$3
-	.set	noreorder
-	.set	nomacro
-	beq	$8,$0,$L11
-	sw	$5,0($11)
-	.set	macro
-	.set	reorder
-
-	lw	$4,-8($9)
-	#nop
-	multu	$7,$4
-	mfhi	$4
-	mflo	$5
-	#nop
-	move	$3,$6
-	move	$2,$0
-	addu	$8,$8,-1
-	addu	$5,$5,$3
-	sltu	$6,$5,$3
-	addu	$4,$4,$2
-	addu	$4,$4,$6
-	srl	$3,$4,0
-	move	$2,$0
-	move	$6,$3
-	.set	noreorder
-	.set	nomacro
-	beq	$8,$0,$L11
-	sw	$5,-8($10)
-	.set	macro
-	.set	reorder
-
-	lw	$4,-4($9)
-	#nop
-	multu	$7,$4
-	mfhi	$4
-	mflo	$5
-	#nop
-	move	$3,$6
-	move	$2,$0
-	addu	$8,$8,-1
-	addu	$5,$5,$3
-	sltu	$6,$5,$3
-	addu	$4,$4,$2
-	addu	$4,$4,$6
-	srl	$3,$4,0
-	move	$2,$0
-	move	$6,$3
-	.set	noreorder
-	.set	nomacro
-	beq	$8,$0,$L11
-	sw	$5,-4($10)
-	.set	macro
-	.set	reorder
-
-	lw	$4,0($9)
-	#nop
-	multu	$7,$4
-	mfhi	$4
-	mflo	$5
-	#nop
-	move	$3,$6
-	move	$2,$0
-	addu	$8,$8,-1
-	addu	$5,$5,$3
-	sltu	$6,$5,$3
-	addu	$4,$4,$2
-	addu	$4,$4,$6
-	srl	$3,$4,0
-	move	$2,$0
-	move	$6,$3
-	.set	noreorder
-	.set	nomacro
-	beq	$8,$0,$L11
-	sw	$5,0($10)
-	.set	macro
-	.set	reorder
-
-	addu	$9,$9,16
-	addu	$12,$12,16
-	addu	$10,$10,16
-	.set	noreorder
-	.set	nomacro
-	j	$L10
-	addu	$11,$11,16
-	.set	macro
-	.set	reorder
-
-$L11:
-	.set	noreorder
-	.set	nomacro
-	j	$31
-	move	$2,$6
-	.set	macro
-	.set	reorder
-
-	.end	bn_mul_words
-	.align	2
-	.globl	bn_sqr_words
-	.ent	bn_sqr_words
-bn_sqr_words:
-	.frame	$sp,0,$31		# vars= 0, regs= 0/0, args= 0, extra= 0
-	.mask	0x00000000,0
-	.fmask	0x00000000,0
-	.set	noreorder
-	.cpload	$25
-	.set	reorder
-	move	$9,$4
-	addu	$7,$9,28
-	addu	$8,$5,12
-$L18:
-	lw	$2,0($5)
-	#nop
-	multu	$2,$2
-	mfhi	$2
-	mflo	$3
-	#nop
-	addu	$6,$6,-1
-	sw	$3,0($9)
-	srl	$3,$2,0
-	move	$2,$0
-	.set	noreorder
-	.set	nomacro
-	beq	$6,$0,$L19
-	sw	$3,-24($7)
-	.set	macro
-	.set	reorder
-
-	lw	$2,-8($8)
-	#nop
-	multu	$2,$2
-	mfhi	$2
-	mflo	$3
-	#nop
-	addu	$6,$6,-1
-	sw	$3,-20($7)
-	srl	$3,$2,0
-	move	$2,$0
-	.set	noreorder
-	.set	nomacro
-	beq	$6,$0,$L19
-	sw	$3,-16($7)
-	.set	macro
-	.set	reorder
-
-	lw	$2,-4($8)
-	#nop
-	multu	$2,$2
-	mfhi	$2
-	mflo	$3
-	#nop
-	addu	$6,$6,-1
-	sw	$3,-12($7)
-	srl	$3,$2,0
-	move	$2,$0
-	.set	noreorder
-	.set	nomacro
-	beq	$6,$0,$L19
-	sw	$3,-8($7)
-	.set	macro
-	.set	reorder
-
-	lw	$2,0($8)
-	#nop
-	multu	$2,$2
-	mfhi	$2
-	mflo	$3
-	#nop
-	addu	$6,$6,-1
-	sw	$3,-4($7)
-	srl	$3,$2,0
-	move	$2,$0
-	.set	noreorder
-	.set	nomacro
-	beq	$6,$0,$L19
-	sw	$3,0($7)
-	.set	macro
-	.set	reorder
-
-	addu	$8,$8,16
-	addu	$5,$5,16
-	addu	$7,$7,32
-	.set	noreorder
-	.set	nomacro
-	j	$L18
-	addu	$9,$9,32
-	.set	macro
-	.set	reorder
-
-$L19:
-	j	$31
-	.end	bn_sqr_words
-	.rdata
-	.align	2
-$LC0:
-
-	.byte	0x44,0x69,0x76,0x69,0x73,0x69,0x6f,0x6e
-	.byte	0x20,0x77,0x6f,0x75,0x6c,0x64,0x20,0x6f
-	.byte	0x76,0x65,0x72,0x66,0x6c,0x6f,0x77,0xa
-	.byte	0x0
-	.text
-	.align	2
-	.globl	bn_div64
-	.ent	bn_div64
-bn_div64:
-	.frame	$sp,56,$31		# vars= 0, regs= 7/0, args= 16, extra= 8
-	.mask	0x901f0000,-8
-	.fmask	0x00000000,0
-	.set	noreorder
-	.cpload	$25
-	.set	reorder
-	subu	$sp,$sp,56
-	.cprestore 16
-	sw	$16,24($sp)
-	move	$16,$4
-	sw	$17,28($sp)
-	move	$17,$5
-	sw	$18,32($sp)
-	move	$18,$6
-	sw	$20,40($sp)
-	move	$20,$0
-	sw	$19,36($sp)
-	li	$19,0x00000002		# 2
-	sw	$31,48($sp)
-	.set	noreorder
-	.set	nomacro
-	bne	$18,$0,$L26
-	sw	$28,44($sp)
-	.set	macro
-	.set	reorder
-
-	.set	noreorder
-	.set	nomacro
-	j	$L43
-	li	$2,-1			# 0xffffffff
-	.set	macro
-	.set	reorder
-
-$L26:
-	move	$4,$18
-	jal	BN_num_bits_word
-	move	$4,$2
-	li	$2,0x00000020		# 32
-	.set	noreorder
-	.set	nomacro
-	beq	$4,$2,$L27
-	li	$2,0x00000001		# 1
-	.set	macro
-	.set	reorder
-
-	sll	$2,$2,$4
-	sltu	$2,$2,$16
-	.set	noreorder
-	.set	nomacro
-	beq	$2,$0,$L44
-	li	$5,0x00000020		# 32
-	.set	macro
-	.set	reorder
-
-	la	$4,__iob+32
-	la	$5,$LC0
-	jal	fprintf
-	jal	abort
-$L27:
-	li	$5,0x00000020		# 32
-$L44:
-	sltu	$2,$16,$18
-	.set	noreorder
-	.set	nomacro
-	bne	$2,$0,$L28
-	subu	$4,$5,$4
-	.set	macro
-	.set	reorder
-
-	subu	$16,$16,$18
-$L28:
-	.set	noreorder
-	.set	nomacro
-	beq	$4,$0,$L29
-	li	$10,-65536			# 0xffff0000
-	.set	macro
-	.set	reorder
-
-	sll	$18,$18,$4
-	sll	$3,$16,$4
-	subu	$2,$5,$4
-	srl	$2,$17,$2
-	or	$16,$3,$2
-	sll	$17,$17,$4
-$L29:
-	srl	$7,$18,16
-	andi	$9,$18,0xffff
-$L30:
-	srl	$2,$16,16
-	.set	noreorder
-	.set	nomacro
-	beq	$2,$7,$L34
-	li	$6,0x0000ffff		# 65535
-	.set	macro
-	.set	reorder
-
-	divu	$6,$16,$7
-$L34:
-	mult	$6,$9
-	mflo	$5
-	#nop
-	#nop
-	mult	$6,$7
-	and	$2,$17,$10
-	srl	$8,$2,16
-	mflo	$4
-$L35:
-	subu	$3,$16,$4
-	and	$2,$3,$10
-	.set	noreorder
-	.set	nomacro
-	bne	$2,$0,$L36
-	sll	$2,$3,16
-	.set	macro
-	.set	reorder
-
-	addu	$2,$2,$8
-	sltu	$2,$2,$5
-	.set	noreorder
-	.set	nomacro
-	beq	$2,$0,$L36
-	subu	$5,$5,$9
-	.set	macro
-	.set	reorder
-
-	subu	$4,$4,$7
-	.set	noreorder
-	.set	nomacro
-	j	$L35
-	addu	$6,$6,-1
-	.set	macro
-	.set	reorder
-
-$L36:
-	mult	$6,$7
-	mflo	$5
-	#nop
-	#nop
-	mult	$6,$9
-	mflo	$4
-	#nop
-	#nop
-	srl	$3,$4,16
-	sll	$2,$4,16
-	and	$4,$2,$10
-	sltu	$2,$17,$4
-	.set	noreorder
-	.set	nomacro
-	beq	$2,$0,$L40
-	addu	$5,$5,$3
-	.set	macro
-	.set	reorder
-
-	addu	$5,$5,1
-$L40:
-	sltu	$2,$16,$5
-	.set	noreorder
-	.set	nomacro
-	beq	$2,$0,$L41
-	subu	$17,$17,$4
-	.set	macro
-	.set	reorder
-
-	addu	$16,$16,$18
-	addu	$6,$6,-1
-$L41:
-	addu	$19,$19,-1
-	.set	noreorder
-	.set	nomacro
-	beq	$19,$0,$L31
-	subu	$16,$16,$5
-	.set	macro
-	.set	reorder
-
-	sll	$20,$6,16
-	sll	$3,$16,16
-	srl	$2,$17,16
-	or	$16,$3,$2
-	.set	noreorder
-	.set	nomacro
-	j	$L30
-	sll	$17,$17,16
-	.set	macro
-	.set	reorder
-
-$L31:
-	or	$2,$20,$6
-$L43:
-	lw	$31,48($sp)
-	lw	$20,40($sp)
-	lw	$19,36($sp)
-	lw	$18,32($sp)
-	lw	$17,28($sp)
-	lw	$16,24($sp)
-	addu	$sp,$sp,56
-	j	$31
-	.end	bn_div64
-
-	.globl abort .text
-	.globl fprintf .text
-	.globl BN_num_bits_word .text
diff --git a/crypto/openssl/crypto/bn/asm/sparcv8.S b/crypto/openssl/crypto/bn/asm/sparcv8.S
deleted file mode 100644
index 88c5dc480a76..000000000000
--- a/crypto/openssl/crypto/bn/asm/sparcv8.S
+++ /dev/null
@@ -1,1458 +0,0 @@
-.ident	"sparcv8.s, Version 1.4"
-.ident	"SPARC v8 ISA artwork by Andy Polyakov <appro@fy.chalmers.se>"
-
-/*
- * ====================================================================
- * Written by Andy Polyakov <appro@fy.chalmers.se> for the OpenSSL
- * project.
- *
- * Rights for redistribution and usage in source and binary forms are
- * granted according to the OpenSSL license. Warranty of any kind is
- * disclaimed.
- * ====================================================================
- */
-
-/*
- * This is my modest contributon to OpenSSL project (see
- * http://www.openssl.org/ for more information about it) and is
- * a drop-in SuperSPARC ISA replacement for crypto/bn/bn_asm.c
- * module. For updates see http://fy.chalmers.se/~appro/hpe/.
- *
- * See bn_asm.sparc.v8plus.S for more details.
- */
-
-/*
- * Revision history.
- *
- * 1.1	- new loop unrolling model(*);
- * 1.2	- made gas friendly;
- * 1.3	- fixed problem with /usr/ccs/lib/cpp;
- * 1.4	- some retunes;
- *
- * (*)	see bn_asm.sparc.v8plus.S for details
- */
-
-.section	".text",#alloc,#execinstr
-.file		"bn_asm.sparc.v8.S"
-
-.align	32
-
-.global bn_mul_add_words
-/*
- * BN_ULONG bn_mul_add_words(rp,ap,num,w)
- * BN_ULONG *rp,*ap;
- * int num;
- * BN_ULONG w;
- */
-bn_mul_add_words:
-	cmp	%o2,0
-	bg,a	.L_bn_mul_add_words_proceed
-	ld	[%o1],%g2
-	retl
-	clr	%o0
-
-.L_bn_mul_add_words_proceed:
-	andcc	%o2,-4,%g0
-	bz	.L_bn_mul_add_words_tail
-	clr	%o5
-
-.L_bn_mul_add_words_loop:
-	ld	[%o0],%o4
-	ld	[%o1+4],%g3
-	umul	%o3,%g2,%g2
-	rd	%y,%g1
-	addcc	%o4,%o5,%o4
-	addx	%g1,0,%g1
-	addcc	%o4,%g2,%o4
-	st	%o4,[%o0]
-	addx	%g1,0,%o5
-
-	ld	[%o0+4],%o4
-	ld	[%o1+8],%g2
-	umul	%o3,%g3,%g3
-	dec	4,%o2
-	rd	%y,%g1
-	addcc	%o4,%o5,%o4
-	addx	%g1,0,%g1
-	addcc	%o4,%g3,%o4
-	st	%o4,[%o0+4]
-	addx	%g1,0,%o5
-
-	ld	[%o0+8],%o4
-	ld	[%o1+12],%g3
-	umul	%o3,%g2,%g2
-	inc	16,%o1
-	rd	%y,%g1
-	addcc	%o4,%o5,%o4
-	addx	%g1,0,%g1
-	addcc	%o4,%g2,%o4
-	st	%o4,[%o0+8]
-	addx	%g1,0,%o5
-
-	ld	[%o0+12],%o4
-	umul	%o3,%g3,%g3
-	inc	16,%o0
-	rd	%y,%g1
-	addcc	%o4,%o5,%o4
-	addx	%g1,0,%g1
-	addcc	%o4,%g3,%o4
-	st	%o4,[%o0-4]
-	addx	%g1,0,%o5
-	andcc	%o2,-4,%g0
-	bnz,a	.L_bn_mul_add_words_loop
-	ld	[%o1],%g2
-
-	tst	%o2
-	bnz,a	.L_bn_mul_add_words_tail
-	ld	[%o1],%g2
-.L_bn_mul_add_words_return:
-	retl
-	mov	%o5,%o0
-	nop
-
-.L_bn_mul_add_words_tail:
-	ld	[%o0],%o4
-	umul	%o3,%g2,%g2
-	addcc	%o4,%o5,%o4
-	rd	%y,%g1
-	addx	%g1,0,%g1
-	addcc	%o4,%g2,%o4
-	addx	%g1,0,%o5
-	deccc	%o2
-	bz	.L_bn_mul_add_words_return
-	st	%o4,[%o0]
-
-	ld	[%o1+4],%g2
-	ld	[%o0+4],%o4
-	umul	%o3,%g2,%g2
-	rd	%y,%g1
-	addcc	%o4,%o5,%o4
-	addx	%g1,0,%g1
-	addcc	%o4,%g2,%o4
-	addx	%g1,0,%o5
-	deccc	%o2
-	bz	.L_bn_mul_add_words_return
-	st	%o4,[%o0+4]
-
-	ld	[%o1+8],%g2
-	ld	[%o0+8],%o4
-	umul	%o3,%g2,%g2
-	rd	%y,%g1
-	addcc	%o4,%o5,%o4
-	addx	%g1,0,%g1
-	addcc	%o4,%g2,%o4
-	st	%o4,[%o0+8]
-	retl
-	addx	%g1,0,%o0
-
-.type	bn_mul_add_words,#function
-.size	bn_mul_add_words,(.-bn_mul_add_words)
-
-.align	32
-
-.global bn_mul_words
-/*
- * BN_ULONG bn_mul_words(rp,ap,num,w)
- * BN_ULONG *rp,*ap;
- * int num;
- * BN_ULONG w;
- */
-bn_mul_words:
-	cmp	%o2,0
-	bg,a	.L_bn_mul_words_proceeed
-	ld	[%o1],%g2
-	retl
-	clr	%o0
-
-.L_bn_mul_words_proceeed:
-	andcc	%o2,-4,%g0
-	bz	.L_bn_mul_words_tail
-	clr	%o5
-
-.L_bn_mul_words_loop:
-	ld	[%o1+4],%g3
-	umul	%o3,%g2,%g2
-	addcc	%g2,%o5,%g2
-	rd	%y,%g1
-	addx	%g1,0,%o5
-	st	%g2,[%o0]
-
-	ld	[%o1+8],%g2
-	umul	%o3,%g3,%g3
-	addcc	%g3,%o5,%g3
-	rd	%y,%g1
-	dec	4,%o2
-	addx	%g1,0,%o5
-	st	%g3,[%o0+4]
-
-	ld	[%o1+12],%g3
-	umul	%o3,%g2,%g2
-	addcc	%g2,%o5,%g2
-	rd	%y,%g1
-	inc	16,%o1
-	st	%g2,[%o0+8]
-	addx	%g1,0,%o5
-
-	umul	%o3,%g3,%g3
-	addcc	%g3,%o5,%g3
-	rd	%y,%g1
-	inc	16,%o0
-	addx	%g1,0,%o5
-	st	%g3,[%o0-4]
-	andcc	%o2,-4,%g0
-	nop
-	bnz,a	.L_bn_mul_words_loop
-	ld	[%o1],%g2
-
-	tst	%o2
-	bnz,a	.L_bn_mul_words_tail
-	ld	[%o1],%g2
-.L_bn_mul_words_return:
-	retl
-	mov	%o5,%o0
-	nop
-
-.L_bn_mul_words_tail:
-	umul	%o3,%g2,%g2
-	addcc	%g2,%o5,%g2
-	rd	%y,%g1
-	addx	%g1,0,%o5
-	deccc	%o2
-	bz	.L_bn_mul_words_return
-	st	%g2,[%o0]
-	nop
-
-	ld	[%o1+4],%g2
-	umul	%o3,%g2,%g2
-	addcc	%g2,%o5,%g2
-	rd	%y,%g1
-	addx	%g1,0,%o5
-	deccc	%o2
-	bz	.L_bn_mul_words_return
-	st	%g2,[%o0+4]
-
-	ld	[%o1+8],%g2
-	umul	%o3,%g2,%g2
-	addcc	%g2,%o5,%g2
-	rd	%y,%g1
-	st	%g2,[%o0+8]
-	retl
-	addx	%g1,0,%o0
-
-.type	bn_mul_words,#function
-.size	bn_mul_words,(.-bn_mul_words)
-
-.align  32
-.global	bn_sqr_words
-/*
- * void bn_sqr_words(r,a,n)
- * BN_ULONG *r,*a;
- * int n;
- */
-bn_sqr_words:
-	cmp	%o2,0
-	bg,a	.L_bn_sqr_words_proceeed
-	ld	[%o1],%g2
-	retl
-	clr	%o0
-
-.L_bn_sqr_words_proceeed:
-	andcc	%o2,-4,%g0
-	bz	.L_bn_sqr_words_tail
-	clr	%o5
-
-.L_bn_sqr_words_loop:
-	ld	[%o1+4],%g3
-	umul	%g2,%g2,%o4
-	st	%o4,[%o0]
-	rd	%y,%o5
-	st	%o5,[%o0+4]
-
-	ld	[%o1+8],%g2
-	umul	%g3,%g3,%o4
-	dec	4,%o2
-	st	%o4,[%o0+8]
-	rd	%y,%o5
-	st	%o5,[%o0+12]
-	nop
-
-	ld	[%o1+12],%g3
-	umul	%g2,%g2,%o4
-	st	%o4,[%o0+16]
-	rd	%y,%o5
-	inc	16,%o1
-	st	%o5,[%o0+20]
-
-	umul	%g3,%g3,%o4
-	inc	32,%o0
-	st	%o4,[%o0-8]
-	rd	%y,%o5
-	st	%o5,[%o0-4]
-	andcc	%o2,-4,%g2
-	bnz,a	.L_bn_sqr_words_loop
-	ld	[%o1],%g2
-
-	tst	%o2
-	nop
-	bnz,a	.L_bn_sqr_words_tail
-	ld	[%o1],%g2
-.L_bn_sqr_words_return:
-	retl
-	clr	%o0
-
-.L_bn_sqr_words_tail:
-	umul	%g2,%g2,%o4
-	st	%o4,[%o0]
-	deccc	%o2
-	rd	%y,%o5
-	bz	.L_bn_sqr_words_return
-	st	%o5,[%o0+4]
-
-	ld	[%o1+4],%g2
-	umul	%g2,%g2,%o4
-	st	%o4,[%o0+8]
-	deccc	%o2
-	rd	%y,%o5
-	nop
-	bz	.L_bn_sqr_words_return
-	st	%o5,[%o0+12]
-
-	ld	[%o1+8],%g2
-	umul	%g2,%g2,%o4
-	st	%o4,[%o0+16]
-	rd	%y,%o5
-	st	%o5,[%o0+20]
-	retl
-	clr	%o0
-
-.type	bn_sqr_words,#function
-.size	bn_sqr_words,(.-bn_sqr_words)
-
-.align	32
-
-.global bn_div_words
-/*
- * BN_ULONG bn_div_words(h,l,d)
- * BN_ULONG h,l,d;
- */
-bn_div_words:
-	wr	%o0,%y
-	udiv	%o1,%o2,%o0
-	retl
-	nop
-
-.type	bn_div_words,#function
-.size	bn_div_words,(.-bn_div_words)
-
-.align	32
-
-.global bn_add_words
-/*
- * BN_ULONG bn_add_words(rp,ap,bp,n)
- * BN_ULONG *rp,*ap,*bp;
- * int n;
- */
-bn_add_words:
-	cmp	%o3,0
-	bg,a	.L_bn_add_words_proceed
-	ld	[%o1],%o4
-	retl
-	clr	%o0
-
-.L_bn_add_words_proceed:
-	andcc	%o3,-4,%g0
-	bz	.L_bn_add_words_tail
-	clr	%g1
-	ba	.L_bn_add_words_warn_loop
-	addcc	%g0,0,%g0	! clear carry flag
-
-.L_bn_add_words_loop:
-	ld	[%o1],%o4
-.L_bn_add_words_warn_loop:
-	ld	[%o2],%o5
-	ld	[%o1+4],%g3
-	ld	[%o2+4],%g4
-	dec	4,%o3
-	addxcc	%o5,%o4,%o5
-	st	%o5,[%o0]
-
-	ld	[%o1+8],%o4
-	ld	[%o2+8],%o5
-	inc	16,%o1
-	addxcc	%g3,%g4,%g3
-	st	%g3,[%o0+4]
-	
-	ld	[%o1-4],%g3
-	ld	[%o2+12],%g4
-	inc	16,%o2
-	addxcc	%o5,%o4,%o5
-	st	%o5,[%o0+8]
-
-	inc	16,%o0
-	addxcc	%g3,%g4,%g3
-	st	%g3,[%o0-4]
-	addx	%g0,0,%g1
-	andcc	%o3,-4,%g0
-	bnz,a	.L_bn_add_words_loop
-	addcc	%g1,-1,%g0
-
-	tst	%o3
-	bnz,a	.L_bn_add_words_tail
-	ld	[%o1],%o4
-.L_bn_add_words_return:
-	retl
-	mov	%g1,%o0
-
-.L_bn_add_words_tail:
-	addcc	%g1,-1,%g0
-	ld	[%o2],%o5
-	addxcc	%o5,%o4,%o5
-	addx	%g0,0,%g1
-	deccc	%o3
-	bz	.L_bn_add_words_return
-	st	%o5,[%o0]
-
-	ld	[%o1+4],%o4
-	addcc	%g1,-1,%g0
-	ld	[%o2+4],%o5
-	addxcc	%o5,%o4,%o5
-	addx	%g0,0,%g1
-	deccc	%o3
-	bz	.L_bn_add_words_return
-	st	%o5,[%o0+4]
-
-	ld	[%o1+8],%o4
-	addcc	%g1,-1,%g0
-	ld	[%o2+8],%o5
-	addxcc	%o5,%o4,%o5
-	st	%o5,[%o0+8]
-	retl
-	addx	%g0,0,%o0
-
-.type	bn_add_words,#function
-.size	bn_add_words,(.-bn_add_words)
-
-.align	32
-
-.global bn_sub_words
-/*
- * BN_ULONG bn_sub_words(rp,ap,bp,n)
- * BN_ULONG *rp,*ap,*bp;
- * int n;
- */
-bn_sub_words:
-	cmp	%o3,0
-	bg,a	.L_bn_sub_words_proceed
-	ld	[%o1],%o4
-	retl
-	clr	%o0
-
-.L_bn_sub_words_proceed:
-	andcc	%o3,-4,%g0
-	bz	.L_bn_sub_words_tail
-	clr	%g1
-	ba	.L_bn_sub_words_warm_loop
-	addcc	%g0,0,%g0	! clear carry flag
-
-.L_bn_sub_words_loop:
-	ld	[%o1],%o4
-.L_bn_sub_words_warm_loop:
-	ld	[%o2],%o5
-	ld	[%o1+4],%g3
-	ld	[%o2+4],%g4
-	dec	4,%o3
-	subxcc	%o4,%o5,%o5
-	st	%o5,[%o0]
-
-	ld	[%o1+8],%o4
-	ld	[%o2+8],%o5
-	inc	16,%o1
-	subxcc	%g3,%g4,%g4
-	st	%g4,[%o0+4]
-	
-	ld	[%o1-4],%g3
-	ld	[%o2+12],%g4
-	inc	16,%o2
-	subxcc	%o4,%o5,%o5
-	st	%o5,[%o0+8]
-
-	inc	16,%o0
-	subxcc	%g3,%g4,%g4
-	st	%g4,[%o0-4]
-	addx	%g0,0,%g1
-	andcc	%o3,-4,%g0
-	bnz,a	.L_bn_sub_words_loop
-	addcc	%g1,-1,%g0
-
-	tst	%o3
-	nop
-	bnz,a	.L_bn_sub_words_tail
-	ld	[%o1],%o4
-.L_bn_sub_words_return:
-	retl
-	mov	%g1,%o0
-
-.L_bn_sub_words_tail:
-	addcc	%g1,-1,%g0
-	ld	[%o2],%o5
-	subxcc	%o4,%o5,%o5
-	addx	%g0,0,%g1
-	deccc	%o3
-	bz	.L_bn_sub_words_return
-	st	%o5,[%o0]
-	nop
-
-	ld	[%o1+4],%o4
-	addcc	%g1,-1,%g0
-	ld	[%o2+4],%o5
-	subxcc	%o4,%o5,%o5
-	addx	%g0,0,%g1
-	deccc	%o3
-	bz	.L_bn_sub_words_return
-	st	%o5,[%o0+4]
-
-	ld	[%o1+8],%o4
-	addcc	%g1,-1,%g0
-	ld	[%o2+8],%o5
-	subxcc	%o4,%o5,%o5
-	st	%o5,[%o0+8]
-	retl
-	addx	%g0,0,%o0
-
-.type	bn_sub_words,#function
-.size	bn_sub_words,(.-bn_sub_words)
-
-#define FRAME_SIZE	-96
-
-/*
- * Here is register usage map for *all* routines below.
- */
-#define t_1	%o0
-#define	t_2	%o1
-#define c_1	%o2
-#define c_2	%o3
-#define c_3	%o4
-
-#define ap(I)	[%i1+4*I]
-#define bp(I)	[%i2+4*I]
-#define rp(I)	[%i0+4*I]
-
-#define	a_0	%l0
-#define	a_1	%l1
-#define	a_2	%l2
-#define	a_3	%l3
-#define	a_4	%l4
-#define	a_5	%l5
-#define	a_6	%l6
-#define	a_7	%l7
-
-#define	b_0	%i3
-#define	b_1	%i4
-#define	b_2	%i5
-#define	b_3	%o5
-#define	b_4	%g1
-#define	b_5	%g2
-#define	b_6	%g3
-#define	b_7	%g4
-
-.align	32
-.global bn_mul_comba8
-/*
- * void bn_mul_comba8(r,a,b)
- * BN_ULONG *r,*a,*b;
- */
-bn_mul_comba8:
-	save	%sp,FRAME_SIZE,%sp
-	ld	ap(0),a_0
-	ld	bp(0),b_0
-	umul	a_0,b_0,c_1	!=!mul_add_c(a[0],b[0],c1,c2,c3);
-	ld	bp(1),b_1
-	rd	%y,c_2
-	st	c_1,rp(0)	!r[0]=c1;
-
-	umul	a_0,b_1,t_1	!=!mul_add_c(a[0],b[1],c2,c3,c1);
-	ld	ap(1),a_1
-	addcc	c_2,t_1,c_2
-	rd	%y,t_2
-	addxcc	%g0,t_2,c_3	!=
-	addx	%g0,%g0,c_1
-	ld	ap(2),a_2
-	umul	a_1,b_0,t_1	!mul_add_c(a[1],b[0],c2,c3,c1);
-	addcc	c_2,t_1,c_2	!=
-	rd	%y,t_2
-	addxcc	c_3,t_2,c_3
-	st	c_2,rp(1)	!r[1]=c2;
-	addx	c_1,%g0,c_1	!=
-
-	umul	a_2,b_0,t_1	!mul_add_c(a[2],b[0],c3,c1,c2);
-	addcc	c_3,t_1,c_3
-	rd	%y,t_2
-	addxcc	c_1,t_2,c_1	!=
-	addx	%g0,%g0,c_2
-	ld	bp(2),b_2
-	umul	a_1,b_1,t_1	!mul_add_c(a[1],b[1],c3,c1,c2);
-	addcc	c_3,t_1,c_3	!=
-	rd	%y,t_2
-	addxcc	c_1,t_2,c_1
-	ld	bp(3),b_3
-	addx	c_2,%g0,c_2	!=
-	umul	a_0,b_2,t_1	!mul_add_c(a[0],b[2],c3,c1,c2);
-	addcc	c_3,t_1,c_3
-	rd	%y,t_2
-	addxcc	c_1,t_2,c_1	!=
-	addx	c_2,%g0,c_2
-	st	c_3,rp(2)	!r[2]=c3;
-
-	umul	a_0,b_3,t_1	!mul_add_c(a[0],b[3],c1,c2,c3);
-	addcc	c_1,t_1,c_1	!=
-	rd	%y,t_2
-	addxcc	c_2,t_2,c_2
-	addx	%g0,%g0,c_3
-	umul	a_1,b_2,t_1	!=!mul_add_c(a[1],b[2],c1,c2,c3);
-	addcc	c_1,t_1,c_1
-	rd	%y,t_2
-	addxcc	c_2,t_2,c_2
-	addx	c_3,%g0,c_3	!=
-	ld	ap(3),a_3
-	umul	a_2,b_1,t_1	!mul_add_c(a[2],b[1],c1,c2,c3);
-	addcc	c_1,t_1,c_1
-	rd	%y,t_2		!=
-	addxcc	c_2,t_2,c_2
-	addx	c_3,%g0,c_3
-	ld	ap(4),a_4
-	umul	a_3,b_0,t_1	!mul_add_c(a[3],b[0],c1,c2,c3);!=
-	addcc	c_1,t_1,c_1
-	rd	%y,t_2
-	addxcc	c_2,t_2,c_2
-	addx	c_3,%g0,c_3	!=
-	st	c_1,rp(3)	!r[3]=c1;
-
-	umul	a_4,b_0,t_1	!mul_add_c(a[4],b[0],c2,c3,c1);
-	addcc	c_2,t_1,c_2
-	rd	%y,t_2		!=
-	addxcc	c_3,t_2,c_3
-	addx	%g0,%g0,c_1
-	umul	a_3,b_1,t_1	!mul_add_c(a[3],b[1],c2,c3,c1);
-	addcc	c_2,t_1,c_2	!=
-	rd	%y,t_2
-	addxcc	c_3,t_2,c_3
-	addx	c_1,%g0,c_1
-	umul	a_2,b_2,t_1	!=!mul_add_c(a[2],b[2],c2,c3,c1);
-	addcc	c_2,t_1,c_2
-	rd	%y,t_2
-	addxcc	c_3,t_2,c_3
-	addx	c_1,%g0,c_1	!=
-	ld	bp(4),b_4
-	umul	a_1,b_3,t_1	!mul_add_c(a[1],b[3],c2,c3,c1);
-	addcc	c_2,t_1,c_2
-	rd	%y,t_2		!=
-	addxcc	c_3,t_2,c_3
-	addx	c_1,%g0,c_1
-	ld	bp(5),b_5
-	umul	a_0,b_4,t_1	!=!mul_add_c(a[0],b[4],c2,c3,c1);
-	addcc	c_2,t_1,c_2
-	rd	%y,t_2
-	addxcc	c_3,t_2,c_3
-	addx	c_1,%g0,c_1	!=
-	st	c_2,rp(4)	!r[4]=c2;
-
-	umul	a_0,b_5,t_1	!mul_add_c(a[0],b[5],c3,c1,c2);
-	addcc	c_3,t_1,c_3
-	rd	%y,t_2		!=
-	addxcc	c_1,t_2,c_1
-	addx	%g0,%g0,c_2
-	umul	a_1,b_4,t_1	!mul_add_c(a[1],b[4],c3,c1,c2);
-	addcc	c_3,t_1,c_3	!=
-	rd	%y,t_2
-	addxcc	c_1,t_2,c_1
-	addx	c_2,%g0,c_2
-	umul	a_2,b_3,t_1	!=!mul_add_c(a[2],b[3],c3,c1,c2);
-	addcc	c_3,t_1,c_3
-	rd	%y,t_2
-	addxcc	c_1,t_2,c_1
-	addx	c_2,%g0,c_2	!=
-	umul	a_3,b_2,t_1	!mul_add_c(a[3],b[2],c3,c1,c2);
-	addcc	c_3,t_1,c_3
-	rd	%y,t_2
-	addxcc	c_1,t_2,c_1	!=
-	addx	c_2,%g0,c_2
-	ld	ap(5),a_5
-	umul	a_4,b_1,t_1	!mul_add_c(a[4],b[1],c3,c1,c2);
-	addcc	c_3,t_1,c_3	!=
-	rd	%y,t_2
-	addxcc	c_1,t_2,c_1
-	ld	ap(6),a_6
-	addx	c_2,%g0,c_2	!=
-	umul	a_5,b_0,t_1	!mul_add_c(a[5],b[0],c3,c1,c2);
-	addcc	c_3,t_1,c_3
-	rd	%y,t_2
-	addxcc	c_1,t_2,c_1	!=
-	addx	c_2,%g0,c_2
-	st	c_3,rp(5)	!r[5]=c3;
-
-	umul	a_6,b_0,t_1	!mul_add_c(a[6],b[0],c1,c2,c3);
-	addcc	c_1,t_1,c_1	!=
-	rd	%y,t_2
-	addxcc	c_2,t_2,c_2
-	addx	%g0,%g0,c_3
-	umul	a_5,b_1,t_1	!=!mul_add_c(a[5],b[1],c1,c2,c3);
-	addcc	c_1,t_1,c_1
-	rd	%y,t_2
-	addxcc	c_2,t_2,c_2
-	addx	c_3,%g0,c_3	!=
-	umul	a_4,b_2,t_1	!mul_add_c(a[4],b[2],c1,c2,c3);
-	addcc	c_1,t_1,c_1
-	rd	%y,t_2
-	addxcc	c_2,t_2,c_2	!=
-	addx	c_3,%g0,c_3
-	umul	a_3,b_3,t_1	!mul_add_c(a[3],b[3],c1,c2,c3);
-	addcc	c_1,t_1,c_1
-	rd	%y,t_2		!=
-	addxcc	c_2,t_2,c_2
-	addx	c_3,%g0,c_3
-	umul	a_2,b_4,t_1	!mul_add_c(a[2],b[4],c1,c2,c3);
-	addcc	c_1,t_1,c_1	!=
-	rd	%y,t_2
-	addxcc	c_2,t_2,c_2
-	ld	bp(6),b_6
-	addx	c_3,%g0,c_3	!=
-	umul	a_1,b_5,t_1	!mul_add_c(a[1],b[5],c1,c2,c3);
-	addcc	c_1,t_1,c_1
-	rd	%y,t_2
-	addxcc	c_2,t_2,c_2	!=
-	addx	c_3,%g0,c_3
-	ld	bp(7),b_7
-	umul	a_0,b_6,t_1	!mul_add_c(a[0],b[6],c1,c2,c3);
-	addcc	c_1,t_1,c_1	!=
-	rd	%y,t_2
-	addxcc	c_2,t_2,c_2
-	st	c_1,rp(6)	!r[6]=c1;
-	addx	c_3,%g0,c_3	!=
-
-	umul	a_0,b_7,t_1	!mul_add_c(a[0],b[7],c2,c3,c1);
-	addcc	c_2,t_1,c_2
-	rd	%y,t_2
-	addxcc	c_3,t_2,c_3	!=
-	addx	%g0,%g0,c_1
-	umul	a_1,b_6,t_1	!mul_add_c(a[1],b[6],c2,c3,c1);
-	addcc	c_2,t_1,c_2
-	rd	%y,t_2		!=
-	addxcc	c_3,t_2,c_3
-	addx	c_1,%g0,c_1
-	umul	a_2,b_5,t_1	!mul_add_c(a[2],b[5],c2,c3,c1);
-	addcc	c_2,t_1,c_2	!=
-	rd	%y,t_2
-	addxcc	c_3,t_2,c_3
-	addx	c_1,%g0,c_1
-	umul	a_3,b_4,t_1	!=!mul_add_c(a[3],b[4],c2,c3,c1);
-	addcc	c_2,t_1,c_2
-	rd	%y,t_2
-	addxcc	c_3,t_2,c_3
-	addx	c_1,%g0,c_1	!=
-	umul	a_4,b_3,t_1	!mul_add_c(a[4],b[3],c2,c3,c1);
-	addcc	c_2,t_1,c_2
-	rd	%y,t_2
-	addxcc	c_3,t_2,c_3	!=
-	addx	c_1,%g0,c_1
-	umul	a_5,b_2,t_1	!mul_add_c(a[5],b[2],c2,c3,c1);
-	addcc	c_2,t_1,c_2
-	rd	%y,t_2		!=
-	addxcc	c_3,t_2,c_3
-	addx	c_1,%g0,c_1
-	ld	ap(7),a_7
-	umul	a_6,b_1,t_1	!=!mul_add_c(a[6],b[1],c2,c3,c1);
-	addcc	c_2,t_1,c_2
-	rd	%y,t_2
-	addxcc	c_3,t_2,c_3
-	addx	c_1,%g0,c_1	!=
-	umul	a_7,b_0,t_1	!mul_add_c(a[7],b[0],c2,c3,c1);
-	addcc	c_2,t_1,c_2
-	rd	%y,t_2
-	addxcc	c_3,t_2,c_3	!=
-	addx	c_1,%g0,c_1
-	st	c_2,rp(7)	!r[7]=c2;
-
-	umul	a_7,b_1,t_1	!mul_add_c(a[7],b[1],c3,c1,c2);
-	addcc	c_3,t_1,c_3	!=
-	rd	%y,t_2
-	addxcc	c_1,t_2,c_1
-	addx	%g0,%g0,c_2
-	umul	a_6,b_2,t_1	!=!mul_add_c(a[6],b[2],c3,c1,c2);
-	addcc	c_3,t_1,c_3
-	rd	%y,t_2
-	addxcc	c_1,t_2,c_1
-	addx	c_2,%g0,c_2	!=
-	umul	a_5,b_3,t_1	!mul_add_c(a[5],b[3],c3,c1,c2);
-	addcc	c_3,t_1,c_3
-	rd	%y,t_2
-	addxcc	c_1,t_2,c_1	!=
-	addx	c_2,%g0,c_2
-	umul	a_4,b_4,t_1	!mul_add_c(a[4],b[4],c3,c1,c2);
-	addcc	c_3,t_1,c_3
-	rd	%y,t_2		!=
-	addxcc	c_1,t_2,c_1
-	addx	c_2,%g0,c_2
-	umul	a_3,b_5,t_1	!mul_add_c(a[3],b[5],c3,c1,c2);
-	addcc	c_3,t_1,c_3	!=
-	rd	%y,t_2
-	addxcc	c_1,t_2,c_1
-	addx	c_2,%g0,c_2
-	umul	a_2,b_6,t_1	!=!mul_add_c(a[2],b[6],c3,c1,c2);
-	addcc	c_3,t_1,c_3
-	rd	%y,t_2
-	addxcc	c_1,t_2,c_1
-	addx	c_2,%g0,c_2	!=
-	umul	a_1,b_7,t_1	!mul_add_c(a[1],b[7],c3,c1,c2);
-	addcc	c_3,t_1,c_3
-	rd	%y,t_2
-	addxcc	c_1,t_2,c_1	!
-	addx	c_2,%g0,c_2
-	st	c_3,rp(8)	!r[8]=c3;
-
-	umul	a_2,b_7,t_1	!mul_add_c(a[2],b[7],c1,c2,c3);
-	addcc	c_1,t_1,c_1	!=
-	rd	%y,t_2
-	addxcc	c_2,t_2,c_2
-	addx	%g0,%g0,c_3
-	umul	a_3,b_6,t_1	!=!mul_add_c(a[3],b[6],c1,c2,c3);
-	addcc	c_1,t_1,c_1
-	rd	%y,t_2
-	addxcc	c_2,t_2,c_2
-	addx	c_3,%g0,c_3	!=
-	umul	a_4,b_5,t_1	!mul_add_c(a[4],b[5],c1,c2,c3);
-	addcc	c_1,t_1,c_1
-	rd	%y,t_2
-	addxcc	c_2,t_2,c_2	!=
-	addx	c_3,%g0,c_3
-	umul	a_5,b_4,t_1	!mul_add_c(a[5],b[4],c1,c2,c3);
-	addcc	c_1,t_1,c_1
-	rd	%y,t_2		!=
-	addxcc	c_2,t_2,c_2
-	addx	c_3,%g0,c_3
-	umul	a_6,b_3,t_1	!mul_add_c(a[6],b[3],c1,c2,c3);
-	addcc	c_1,t_1,c_1	!=
-	rd	%y,t_2
-	addxcc	c_2,t_2,c_2
-	addx	c_3,%g0,c_3
-	umul	a_7,b_2,t_1	!=!mul_add_c(a[7],b[2],c1,c2,c3);
-	addcc	c_1,t_1,c_1
-	rd	%y,t_2
-	addxcc	c_2,t_2,c_2
-	addx	c_3,%g0,c_3	!=
-	st	c_1,rp(9)	!r[9]=c1;
-
-	umul	a_7,b_3,t_1	!mul_add_c(a[7],b[3],c2,c3,c1);
-	addcc	c_2,t_1,c_2
-	rd	%y,t_2		!=
-	addxcc	c_3,t_2,c_3
-	addx	%g0,%g0,c_1
-	umul	a_6,b_4,t_1	!mul_add_c(a[6],b[4],c2,c3,c1);
-	addcc	c_2,t_1,c_2	!=
-	rd	%y,t_2
-	addxcc	c_3,t_2,c_3
-	addx	c_1,%g0,c_1
-	umul	a_5,b_5,t_1	!=!mul_add_c(a[5],b[5],c2,c3,c1);
-	addcc	c_2,t_1,c_2
-	rd	%y,t_2
-	addxcc	c_3,t_2,c_3
-	addx	c_1,%g0,c_1	!=
-	umul	a_4,b_6,t_1	!mul_add_c(a[4],b[6],c2,c3,c1);
-	addcc	c_2,t_1,c_2
-	rd	%y,t_2
-	addxcc	c_3,t_2,c_3	!=
-	addx	c_1,%g0,c_1
-	umul	a_3,b_7,t_1	!mul_add_c(a[3],b[7],c2,c3,c1);
-	addcc	c_2,t_1,c_2
-	rd	%y,t_2		!=
-	addxcc	c_3,t_2,c_3
-	addx	c_1,%g0,c_1
-	st	c_2,rp(10)	!r[10]=c2;
-
-	umul	a_4,b_7,t_1	!=!mul_add_c(a[4],b[7],c3,c1,c2);
-	addcc	c_3,t_1,c_3
-	rd	%y,t_2
-	addxcc	c_1,t_2,c_1
-	addx	%g0,%g0,c_2	!=
-	umul	a_5,b_6,t_1	!mul_add_c(a[5],b[6],c3,c1,c2);
-	addcc	c_3,t_1,c_3
-	rd	%y,t_2
-	addxcc	c_1,t_2,c_1	!=
-	addx	c_2,%g0,c_2
-	umul	a_6,b_5,t_1	!mul_add_c(a[6],b[5],c3,c1,c2);
-	addcc	c_3,t_1,c_3
-	rd	%y,t_2		!=
-	addxcc	c_1,t_2,c_1
-	addx	c_2,%g0,c_2
-	umul	a_7,b_4,t_1	!mul_add_c(a[7],b[4],c3,c1,c2);
-	addcc	c_3,t_1,c_3	!=
-	rd	%y,t_2
-	addxcc	c_1,t_2,c_1
-	st	c_3,rp(11)	!r[11]=c3;
-	addx	c_2,%g0,c_2	!=
-
-	umul	a_7,b_5,t_1	!mul_add_c(a[7],b[5],c1,c2,c3);
-	addcc	c_1,t_1,c_1
-	rd	%y,t_2
-	addxcc	c_2,t_2,c_2	!=
-	addx	%g0,%g0,c_3
-	umul	a_6,b_6,t_1	!mul_add_c(a[6],b[6],c1,c2,c3);
-	addcc	c_1,t_1,c_1
-	rd	%y,t_2		!=
-	addxcc	c_2,t_2,c_2
-	addx	c_3,%g0,c_3
-	umul	a_5,b_7,t_1	!mul_add_c(a[5],b[7],c1,c2,c3);
-	addcc	c_1,t_1,c_1	!=
-	rd	%y,t_2
-	addxcc	c_2,t_2,c_2
-	st	c_1,rp(12)	!r[12]=c1;
-	addx	c_3,%g0,c_3	!=
-
-	umul	a_6,b_7,t_1	!mul_add_c(a[6],b[7],c2,c3,c1);
-	addcc	c_2,t_1,c_2
-	rd	%y,t_2
-	addxcc	c_3,t_2,c_3	!=
-	addx	%g0,%g0,c_1
-	umul	a_7,b_6,t_1	!mul_add_c(a[7],b[6],c2,c3,c1);
-	addcc	c_2,t_1,c_2
-	rd	%y,t_2		!=
-	addxcc	c_3,t_2,c_3
-	addx	c_1,%g0,c_1
-	st	c_2,rp(13)	!r[13]=c2;
-
-	umul	a_7,b_7,t_1	!=!mul_add_c(a[7],b[7],c3,c1,c2);
-	addcc	c_3,t_1,c_3
-	rd	%y,t_2
-	addxcc	c_1,t_2,c_1
-	nop			!=
-	st	c_3,rp(14)	!r[14]=c3;
-	st	c_1,rp(15)	!r[15]=c1;
-
-	ret
-	restore	%g0,%g0,%o0
-
-.type	bn_mul_comba8,#function
-.size	bn_mul_comba8,(.-bn_mul_comba8)
-
-.align	32
-
-.global bn_mul_comba4
-/*
- * void bn_mul_comba4(r,a,b)
- * BN_ULONG *r,*a,*b;
- */
-bn_mul_comba4:
-	save	%sp,FRAME_SIZE,%sp
-	ld	ap(0),a_0
-	ld	bp(0),b_0
-	umul	a_0,b_0,c_1	!=!mul_add_c(a[0],b[0],c1,c2,c3);
-	ld	bp(1),b_1
-	rd	%y,c_2
-	st	c_1,rp(0)	!r[0]=c1;
-
-	umul	a_0,b_1,t_1	!=!mul_add_c(a[0],b[1],c2,c3,c1);
-	ld	ap(1),a_1
-	addcc	c_2,t_1,c_2
-	rd	%y,t_2		!=
-	addxcc	%g0,t_2,c_3
-	addx	%g0,%g0,c_1
-	ld	ap(2),a_2
-	umul	a_1,b_0,t_1	!=!mul_add_c(a[1],b[0],c2,c3,c1);
-	addcc	c_2,t_1,c_2
-	rd	%y,t_2
-	addxcc	c_3,t_2,c_3
-	addx	c_1,%g0,c_1	!=
-	st	c_2,rp(1)	!r[1]=c2;
-
-	umul	a_2,b_0,t_1	!mul_add_c(a[2],b[0],c3,c1,c2);
-	addcc	c_3,t_1,c_3
-	rd	%y,t_2		!=
-	addxcc	c_1,t_2,c_1
-	addx	%g0,%g0,c_2
-	ld	bp(2),b_2
-	umul	a_1,b_1,t_1	!=!mul_add_c(a[1],b[1],c3,c1,c2);
-	addcc	c_3,t_1,c_3
-	rd	%y,t_2
-	addxcc	c_1,t_2,c_1
-	addx	c_2,%g0,c_2	!=
-	ld	bp(3),b_3
-	umul	a_0,b_2,t_1	!mul_add_c(a[0],b[2],c3,c1,c2);
-	addcc	c_3,t_1,c_3
-	rd	%y,t_2		!=
-	addxcc	c_1,t_2,c_1
-	addx	c_2,%g0,c_2
-	st	c_3,rp(2)	!r[2]=c3;
-
-	umul	a_0,b_3,t_1	!=!mul_add_c(a[0],b[3],c1,c2,c3);
-	addcc	c_1,t_1,c_1
-	rd	%y,t_2
-	addxcc	c_2,t_2,c_2
-	addx	%g0,%g0,c_3	!=
-	umul	a_1,b_2,t_1	!mul_add_c(a[1],b[2],c1,c2,c3);
-	addcc	c_1,t_1,c_1
-	rd	%y,t_2
-	addxcc	c_2,t_2,c_2	!=
-	addx	c_3,%g0,c_3
-	ld	ap(3),a_3
-	umul	a_2,b_1,t_1	!mul_add_c(a[2],b[1],c1,c2,c3);
-	addcc	c_1,t_1,c_1	!=
-	rd	%y,t_2
-	addxcc	c_2,t_2,c_2
-	addx	c_3,%g0,c_3
-	umul	a_3,b_0,t_1	!=!mul_add_c(a[3],b[0],c1,c2,c3);
-	addcc	c_1,t_1,c_1
-	rd	%y,t_2
-	addxcc	c_2,t_2,c_2
-	addx	c_3,%g0,c_3	!=
-	st	c_1,rp(3)	!r[3]=c1;
-
-	umul	a_3,b_1,t_1	!mul_add_c(a[3],b[1],c2,c3,c1);
-	addcc	c_2,t_1,c_2
-	rd	%y,t_2		!=
-	addxcc	c_3,t_2,c_3
-	addx	%g0,%g0,c_1
-	umul	a_2,b_2,t_1	!mul_add_c(a[2],b[2],c2,c3,c1);
-	addcc	c_2,t_1,c_2	!=
-	rd	%y,t_2
-	addxcc	c_3,t_2,c_3
-	addx	c_1,%g0,c_1
-	umul	a_1,b_3,t_1	!=!mul_add_c(a[1],b[3],c2,c3,c1);
-	addcc	c_2,t_1,c_2
-	rd	%y,t_2
-	addxcc	c_3,t_2,c_3
-	addx	c_1,%g0,c_1	!=
-	st	c_2,rp(4)	!r[4]=c2;
-
-	umul	a_2,b_3,t_1	!mul_add_c(a[2],b[3],c3,c1,c2);
-	addcc	c_3,t_1,c_3
-	rd	%y,t_2		!=
-	addxcc	c_1,t_2,c_1
-	addx	%g0,%g0,c_2
-	umul	a_3,b_2,t_1	!mul_add_c(a[3],b[2],c3,c1,c2);
-	addcc	c_3,t_1,c_3	!=
-	rd	%y,t_2
-	addxcc	c_1,t_2,c_1
-	st	c_3,rp(5)	!r[5]=c3;
-	addx	c_2,%g0,c_2	!=
-
-	umul	a_3,b_3,t_1	!mul_add_c(a[3],b[3],c1,c2,c3);
-	addcc	c_1,t_1,c_1
-	rd	%y,t_2
-	addxcc	c_2,t_2,c_2	!=
-	st	c_1,rp(6)	!r[6]=c1;
-	st	c_2,rp(7)	!r[7]=c2;
-	
-	ret
-	restore	%g0,%g0,%o0
-
-.type	bn_mul_comba4,#function
-.size	bn_mul_comba4,(.-bn_mul_comba4)
-
-.align	32
-
-.global bn_sqr_comba8
-bn_sqr_comba8:
-	save	%sp,FRAME_SIZE,%sp
-	ld	ap(0),a_0
-	ld	ap(1),a_1
-	umul	a_0,a_0,c_1	!=!sqr_add_c(a,0,c1,c2,c3);
-	rd	%y,c_2
-	st	c_1,rp(0)	!r[0]=c1;
-
-	ld	ap(2),a_2
-	umul	a_0,a_1,t_1	!=!sqr_add_c2(a,1,0,c2,c3,c1);
-	addcc	c_2,t_1,c_2
-	rd	%y,t_2
-	addxcc	%g0,t_2,c_3
-	addx	%g0,%g0,c_1	!=
-	addcc	c_2,t_1,c_2
-	addxcc	c_3,t_2,c_3
-	st	c_2,rp(1)	!r[1]=c2;
-	addx	c_1,%g0,c_1	!=
-
-	umul	a_2,a_0,t_1	!sqr_add_c2(a,2,0,c3,c1,c2);
-	addcc	c_3,t_1,c_3
-	rd	%y,t_2
-	addxcc	c_1,t_2,c_1	!=
-	addx	%g0,%g0,c_2
-	addcc	c_3,t_1,c_3
-	addxcc	c_1,t_2,c_1
-	addx	c_2,%g0,c_2	!=
-	ld	ap(3),a_3
-	umul	a_1,a_1,t_1	!sqr_add_c(a,1,c3,c1,c2);
-	addcc	c_3,t_1,c_3
-	rd	%y,t_2		!=
-	addxcc	c_1,t_2,c_1
-	addx	c_2,%g0,c_2
-	st	c_3,rp(2)	!r[2]=c3;
-
-	umul	a_0,a_3,t_1	!=!sqr_add_c2(a,3,0,c1,c2,c3);
-	addcc	c_1,t_1,c_1
-	rd	%y,t_2
-	addxcc	c_2,t_2,c_2
-	addx	%g0,%g0,c_3	!=
-	addcc	c_1,t_1,c_1
-	addxcc	c_2,t_2,c_2
-	ld	ap(4),a_4
-	addx	c_3,%g0,c_3	!=
-	umul	a_1,a_2,t_1	!sqr_add_c2(a,2,1,c1,c2,c3);
-	addcc	c_1,t_1,c_1
-	rd	%y,t_2
-	addxcc	c_2,t_2,c_2	!=
-	addx	c_3,%g0,c_3
-	addcc	c_1,t_1,c_1
-	addxcc	c_2,t_2,c_2
-	addx	c_3,%g0,c_3	!=
-	st	c_1,rp(3)	!r[3]=c1;
-
-	umul	a_4,a_0,t_1	!sqr_add_c2(a,4,0,c2,c3,c1);
-	addcc	c_2,t_1,c_2
-	rd	%y,t_2		!=
-	addxcc	c_3,t_2,c_3
-	addx	%g0,%g0,c_1
-	addcc	c_2,t_1,c_2
-	addxcc	c_3,t_2,c_3	!=
-	addx	c_1,%g0,c_1
-	umul	a_3,a_1,t_1	!sqr_add_c2(a,3,1,c2,c3,c1);
-	addcc	c_2,t_1,c_2
-	rd	%y,t_2		!=
-	addxcc	c_3,t_2,c_3
-	addx	c_1,%g0,c_1
-	addcc	c_2,t_1,c_2
-	addxcc	c_3,t_2,c_3	!=
-	addx	c_1,%g0,c_1
-	ld	ap(5),a_5
-	umul	a_2,a_2,t_1	!sqr_add_c(a,2,c2,c3,c1);
-	addcc	c_2,t_1,c_2	!=
-	rd	%y,t_2
-	addxcc	c_3,t_2,c_3
-	st	c_2,rp(4)	!r[4]=c2;
-	addx	c_1,%g0,c_1	!=
-
-	umul	a_0,a_5,t_1	!sqr_add_c2(a,5,0,c3,c1,c2);
-	addcc	c_3,t_1,c_3
-	rd	%y,t_2
-	addxcc	c_1,t_2,c_1	!=
-	addx	%g0,%g0,c_2
-	addcc	c_3,t_1,c_3
-	addxcc	c_1,t_2,c_1
-	addx	c_2,%g0,c_2	!=
-	umul	a_1,a_4,t_1	!sqr_add_c2(a,4,1,c3,c1,c2);
-	addcc	c_3,t_1,c_3
-	rd	%y,t_2
-	addxcc	c_1,t_2,c_1	!=
-	addx	c_2,%g0,c_2
-	addcc	c_3,t_1,c_3
-	addxcc	c_1,t_2,c_1
-	addx	c_2,%g0,c_2	!=
-	ld	ap(6),a_6
-	umul	a_2,a_3,t_1	!sqr_add_c2(a,3,2,c3,c1,c2);
-	addcc	c_3,t_1,c_3
-	rd	%y,t_2		!=
-	addxcc	c_1,t_2,c_1
-	addx	c_2,%g0,c_2
-	addcc	c_3,t_1,c_3
-	addxcc	c_1,t_2,c_1	!=
-	addx	c_2,%g0,c_2
-	st	c_3,rp(5)	!r[5]=c3;
-
-	umul	a_6,a_0,t_1	!sqr_add_c2(a,6,0,c1,c2,c3);
-	addcc	c_1,t_1,c_1	!=
-	rd	%y,t_2
-	addxcc	c_2,t_2,c_2
-	addx	%g0,%g0,c_3
-	addcc	c_1,t_1,c_1	!=
-	addxcc	c_2,t_2,c_2
-	addx	c_3,%g0,c_3
-	umul	a_5,a_1,t_1	!sqr_add_c2(a,5,1,c1,c2,c3);
-	addcc	c_1,t_1,c_1	!=
-	rd	%y,t_2
-	addxcc	c_2,t_2,c_2
-	addx	c_3,%g0,c_3
-	addcc	c_1,t_1,c_1	!=
-	addxcc	c_2,t_2,c_2
-	addx	c_3,%g0,c_3
-	umul	a_4,a_2,t_1	!sqr_add_c2(a,4,2,c1,c2,c3);
-	addcc	c_1,t_1,c_1	!=
-	rd	%y,t_2
-	addxcc	c_2,t_2,c_2
-	addx	c_3,%g0,c_3
-	addcc	c_1,t_1,c_1	!=
-	addxcc	c_2,t_2,c_2
-	addx	c_3,%g0,c_3
-	ld	ap(7),a_7
-	umul	a_3,a_3,t_1	!=!sqr_add_c(a,3,c1,c2,c3);
-	addcc	c_1,t_1,c_1
-	rd	%y,t_2
-	addxcc	c_2,t_2,c_2
-	addx	c_3,%g0,c_3	!=
-	st	c_1,rp(6)	!r[6]=c1;
-
-	umul	a_0,a_7,t_1	!sqr_add_c2(a,7,0,c2,c3,c1);
-	addcc	c_2,t_1,c_2
-	rd	%y,t_2		!=
-	addxcc	c_3,t_2,c_3
-	addx	%g0,%g0,c_1
-	addcc	c_2,t_1,c_2
-	addxcc	c_3,t_2,c_3	!=
-	addx	c_1,%g0,c_1
-	umul	a_1,a_6,t_1	!sqr_add_c2(a,6,1,c2,c3,c1);
-	addcc	c_2,t_1,c_2
-	rd	%y,t_2		!=
-	addxcc	c_3,t_2,c_3
-	addx	c_1,%g0,c_1
-	addcc	c_2,t_1,c_2
-	addxcc	c_3,t_2,c_3	!=
-	addx	c_1,%g0,c_1
-	umul	a_2,a_5,t_1	!sqr_add_c2(a,5,2,c2,c3,c1);
-	addcc	c_2,t_1,c_2
-	rd	%y,t_2		!=
-	addxcc	c_3,t_2,c_3
-	addx	c_1,%g0,c_1
-	addcc	c_2,t_1,c_2
-	addxcc	c_3,t_2,c_3	!=
-	addx	c_1,%g0,c_1
-	umul	a_3,a_4,t_1	!sqr_add_c2(a,4,3,c2,c3,c1);
-	addcc	c_2,t_1,c_2
-	rd	%y,t_2		!=
-	addxcc	c_3,t_2,c_3
-	addx	c_1,%g0,c_1
-	addcc	c_2,t_1,c_2
-	addxcc	c_3,t_2,c_3	!=
-	addx	c_1,%g0,c_1
-	st	c_2,rp(7)	!r[7]=c2;
-
-	umul	a_7,a_1,t_1	!sqr_add_c2(a,7,1,c3,c1,c2);
-	addcc	c_3,t_1,c_3	!=
-	rd	%y,t_2
-	addxcc	c_1,t_2,c_1
-	addx	%g0,%g0,c_2
-	addcc	c_3,t_1,c_3	!=
-	addxcc	c_1,t_2,c_1
-	addx	c_2,%g0,c_2
-	umul	a_6,a_2,t_1	!sqr_add_c2(a,6,2,c3,c1,c2);
-	addcc	c_3,t_1,c_3	!=
-	rd	%y,t_2
-	addxcc	c_1,t_2,c_1
-	addx	c_2,%g0,c_2
-	addcc	c_3,t_1,c_3	!=
-	addxcc	c_1,t_2,c_1
-	addx	c_2,%g0,c_2
-	umul	a_5,a_3,t_1	!sqr_add_c2(a,5,3,c3,c1,c2);
-	addcc	c_3,t_1,c_3	!=
-	rd	%y,t_2
-	addxcc	c_1,t_2,c_1
-	addx	c_2,%g0,c_2
-	addcc	c_3,t_1,c_3	!=
-	addxcc	c_1,t_2,c_1
-	addx	c_2,%g0,c_2
-	umul	a_4,a_4,t_1	!sqr_add_c(a,4,c3,c1,c2);
-	addcc	c_3,t_1,c_3	!=
-	rd	%y,t_2
-	addxcc	c_1,t_2,c_1
-	st	c_3,rp(8)	!r[8]=c3;
-	addx	c_2,%g0,c_2	!=
-
-	umul	a_2,a_7,t_1	!sqr_add_c2(a,7,2,c1,c2,c3);
-	addcc	c_1,t_1,c_1
-	rd	%y,t_2
-	addxcc	c_2,t_2,c_2	!=
-	addx	%g0,%g0,c_3
-	addcc	c_1,t_1,c_1
-	addxcc	c_2,t_2,c_2
-	addx	c_3,%g0,c_3	!=
-	umul	a_3,a_6,t_1	!sqr_add_c2(a,6,3,c1,c2,c3);
-	addcc	c_1,t_1,c_1
-	rd	%y,t_2
-	addxcc	c_2,t_2,c_2	!=
-	addx	c_3,%g0,c_3
-	addcc	c_1,t_1,c_1
-	addxcc	c_2,t_2,c_2
-	addx	c_3,%g0,c_3	!=
-	umul	a_4,a_5,t_1	!sqr_add_c2(a,5,4,c1,c2,c3);
-	addcc	c_1,t_1,c_1
-	rd	%y,t_2
-	addxcc	c_2,t_2,c_2	!=
-	addx	c_3,%g0,c_3
-	addcc	c_1,t_1,c_1
-	addxcc	c_2,t_2,c_2
-	addx	c_3,%g0,c_3	!=
-	st	c_1,rp(9)	!r[9]=c1;
-
-	umul	a_7,a_3,t_1	!sqr_add_c2(a,7,3,c2,c3,c1);
-	addcc	c_2,t_1,c_2
-	rd	%y,t_2		!=
-	addxcc	c_3,t_2,c_3
-	addx	%g0,%g0,c_1
-	addcc	c_2,t_1,c_2
-	addxcc	c_3,t_2,c_3	!=
-	addx	c_1,%g0,c_1
-	umul	a_6,a_4,t_1	!sqr_add_c2(a,6,4,c2,c3,c1);
-	addcc	c_2,t_1,c_2
-	rd	%y,t_2		!=
-	addxcc	c_3,t_2,c_3
-	addx	c_1,%g0,c_1
-	addcc	c_2,t_1,c_2
-	addxcc	c_3,t_2,c_3	!=
-	addx	c_1,%g0,c_1
-	umul	a_5,a_5,t_1	!sqr_add_c(a,5,c2,c3,c1);
-	addcc	c_2,t_1,c_2
-	rd	%y,t_2		!=
-	addxcc	c_3,t_2,c_3
-	addx	c_1,%g0,c_1
-	st	c_2,rp(10)	!r[10]=c2;
-
-	umul	a_4,a_7,t_1	!=!sqr_add_c2(a,7,4,c3,c1,c2);
-	addcc	c_3,t_1,c_3
-	rd	%y,t_2
-	addxcc	c_1,t_2,c_1
-	addx	%g0,%g0,c_2	!=
-	addcc	c_3,t_1,c_3
-	addxcc	c_1,t_2,c_1
-	addx	c_2,%g0,c_2
-	umul	a_5,a_6,t_1	!=!sqr_add_c2(a,6,5,c3,c1,c2);
-	addcc	c_3,t_1,c_3
-	rd	%y,t_2
-	addxcc	c_1,t_2,c_1
-	addx	c_2,%g0,c_2	!=
-	addcc	c_3,t_1,c_3
-	addxcc	c_1,t_2,c_1
-	st	c_3,rp(11)	!r[11]=c3;
-	addx	c_2,%g0,c_2	!=
-
-	umul	a_7,a_5,t_1	!sqr_add_c2(a,7,5,c1,c2,c3);
-	addcc	c_1,t_1,c_1
-	rd	%y,t_2
-	addxcc	c_2,t_2,c_2	!=
-	addx	%g0,%g0,c_3
-	addcc	c_1,t_1,c_1
-	addxcc	c_2,t_2,c_2
-	addx	c_3,%g0,c_3	!=
-	umul	a_6,a_6,t_1	!sqr_add_c(a,6,c1,c2,c3);
-	addcc	c_1,t_1,c_1
-	rd	%y,t_2
-	addxcc	c_2,t_2,c_2	!=
-	addx	c_3,%g0,c_3
-	st	c_1,rp(12)	!r[12]=c1;
-
-	umul	a_6,a_7,t_1	!sqr_add_c2(a,7,6,c2,c3,c1);
-	addcc	c_2,t_1,c_2	!=
-	rd	%y,t_2
-	addxcc	c_3,t_2,c_3
-	addx	%g0,%g0,c_1
-	addcc	c_2,t_1,c_2	!=
-	addxcc	c_3,t_2,c_3
-	st	c_2,rp(13)	!r[13]=c2;
-	addx	c_1,%g0,c_1	!=
-
-	umul	a_7,a_7,t_1	!sqr_add_c(a,7,c3,c1,c2);
-	addcc	c_3,t_1,c_3
-	rd	%y,t_2
-	addxcc	c_1,t_2,c_1	!=
-	st	c_3,rp(14)	!r[14]=c3;
-	st	c_1,rp(15)	!r[15]=c1;
-
-	ret
-	restore	%g0,%g0,%o0
-
-.type	bn_sqr_comba8,#function
-.size	bn_sqr_comba8,(.-bn_sqr_comba8)
-
-.align	32
-
-.global bn_sqr_comba4
-/*
- * void bn_sqr_comba4(r,a)
- * BN_ULONG *r,*a;
- */
-bn_sqr_comba4:
-	save	%sp,FRAME_SIZE,%sp
-	ld	ap(0),a_0
-	umul	a_0,a_0,c_1	!sqr_add_c(a,0,c1,c2,c3);
-	ld	ap(1),a_1	!=
-	rd	%y,c_2
-	st	c_1,rp(0)	!r[0]=c1;
-
-	ld	ap(2),a_2
-	umul	a_0,a_1,t_1	!=!sqr_add_c2(a,1,0,c2,c3,c1);
-	addcc	c_2,t_1,c_2
-	rd	%y,t_2
-	addxcc	%g0,t_2,c_3
-	addx	%g0,%g0,c_1	!=
-	addcc	c_2,t_1,c_2
-	addxcc	c_3,t_2,c_3
-	addx	c_1,%g0,c_1	!=
-	st	c_2,rp(1)	!r[1]=c2;
-
-	umul	a_2,a_0,t_1	!sqr_add_c2(a,2,0,c3,c1,c2);
-	addcc	c_3,t_1,c_3
-	rd	%y,t_2		!=
-	addxcc	c_1,t_2,c_1
-	addx	%g0,%g0,c_2
-	addcc	c_3,t_1,c_3
-	addxcc	c_1,t_2,c_1	!=
-	addx	c_2,%g0,c_2
-	ld	ap(3),a_3
-	umul	a_1,a_1,t_1	!sqr_add_c(a,1,c3,c1,c2);
-	addcc	c_3,t_1,c_3	!=
-	rd	%y,t_2
-	addxcc	c_1,t_2,c_1
-	st	c_3,rp(2)	!r[2]=c3;
-	addx	c_2,%g0,c_2	!=
-
-	umul	a_0,a_3,t_1	!sqr_add_c2(a,3,0,c1,c2,c3);
-	addcc	c_1,t_1,c_1
-	rd	%y,t_2
-	addxcc	c_2,t_2,c_2	!=
-	addx	%g0,%g0,c_3
-	addcc	c_1,t_1,c_1
-	addxcc	c_2,t_2,c_2
-	addx	c_3,%g0,c_3	!=
-	umul	a_1,a_2,t_1	!sqr_add_c2(a,2,1,c1,c2,c3);
-	addcc	c_1,t_1,c_1
-	rd	%y,t_2
-	addxcc	c_2,t_2,c_2	!=
-	addx	c_3,%g0,c_3
-	addcc	c_1,t_1,c_1
-	addxcc	c_2,t_2,c_2
-	addx	c_3,%g0,c_3	!=
-	st	c_1,rp(3)	!r[3]=c1;
-
-	umul	a_3,a_1,t_1	!sqr_add_c2(a,3,1,c2,c3,c1);
-	addcc	c_2,t_1,c_2
-	rd	%y,t_2		!=
-	addxcc	c_3,t_2,c_3
-	addx	%g0,%g0,c_1
-	addcc	c_2,t_1,c_2
-	addxcc	c_3,t_2,c_3	!=
-	addx	c_1,%g0,c_1
-	umul	a_2,a_2,t_1	!sqr_add_c(a,2,c2,c3,c1);
-	addcc	c_2,t_1,c_2
-	rd	%y,t_2		!=
-	addxcc	c_3,t_2,c_3
-	addx	c_1,%g0,c_1
-	st	c_2,rp(4)	!r[4]=c2;
-
-	umul	a_2,a_3,t_1	!=!sqr_add_c2(a,3,2,c3,c1,c2);
-	addcc	c_3,t_1,c_3
-	rd	%y,t_2
-	addxcc	c_1,t_2,c_1
-	addx	%g0,%g0,c_2	!=
-	addcc	c_3,t_1,c_3
-	addxcc	c_1,t_2,c_1
-	st	c_3,rp(5)	!r[5]=c3;
-	addx	c_2,%g0,c_2	!=
-
-	umul	a_3,a_3,t_1	!sqr_add_c(a,3,c1,c2,c3);
-	addcc	c_1,t_1,c_1
-	rd	%y,t_2
-	addxcc	c_2,t_2,c_2	!=
-	st	c_1,rp(6)	!r[6]=c1;
-	st	c_2,rp(7)	!r[7]=c2;
-	
-	ret
-	restore	%g0,%g0,%o0
-
-.type	bn_sqr_comba4,#function
-.size	bn_sqr_comba4,(.-bn_sqr_comba4)
-
-.align	32
diff --git a/crypto/openssl/crypto/bn/asm/sparcv8plus.S b/crypto/openssl/crypto/bn/asm/sparcv8plus.S
deleted file mode 100644
index 8c56e2e7e7cb..000000000000
--- a/crypto/openssl/crypto/bn/asm/sparcv8plus.S
+++ /dev/null
@@ -1,1547 +0,0 @@
-.ident	"sparcv8plus.s, Version 1.4"
-.ident	"SPARC v9 ISA artwork by Andy Polyakov <appro@fy.chalmers.se>"
-
-/*
- * ====================================================================
- * Written by Andy Polyakov <appro@fy.chalmers.se> for the OpenSSL
- * project.
- *
- * Rights for redistribution and usage in source and binary forms are
- * granted according to the OpenSSL license. Warranty of any kind is
- * disclaimed.
- * ====================================================================
- */
-
-/*
- * This is my modest contributon to OpenSSL project (see
- * http://www.openssl.org/ for more information about it) and is
- * a drop-in UltraSPARC ISA replacement for crypto/bn/bn_asm.c
- * module. For updates see http://fy.chalmers.se/~appro/hpe/.
- *
- * Questions-n-answers.
- *
- * Q. How to compile?
- * A. With SC4.x/SC5.x:
- *
- *	cc -xarch=v8plus -c bn_asm.sparc.v8plus.S -o bn_asm.o
- *
- *    and with gcc:
- *
- *	gcc -mcpu=ultrasparc -c bn_asm.sparc.v8plus.S -o bn_asm.o
- *
- *    or if above fails (it does if you have gas installed):
- *
- *	gcc -E bn_asm.sparc.v8plus.S | as -xarch=v8plus /dev/fd/0 -o bn_asm.o
- *
- *    Quick-n-dirty way to fuse the module into the library.
- *    Provided that the library is already configured and built
- *    (in 0.9.2 case with no-asm option):
- *
- *	# cd crypto/bn
- *	# cp /some/place/bn_asm.sparc.v8plus.S .
- *	# cc -xarch=v8plus -c bn_asm.sparc.v8plus.S -o bn_asm.o
- *	# make
- *	# cd ../..
- *	# make; make test
- *
- *    Quick-n-dirty way to get rid of it:
- *
- *	# cd crypto/bn
- *	# touch bn_asm.c
- *	# make
- *	# cd ../..
- *	# make; make test
- *
- * Q. V8plus achitecture? What kind of beast is that?
- * A. Well, it's rather a programming model than an architecture...
- *    It's actually v9-compliant, i.e. *any* UltraSPARC, CPU under
- *    special conditions, namely when kernel doesn't preserve upper
- *    32 bits of otherwise 64-bit registers during a context switch.
- *
- * Q. Why just UltraSPARC? What about SuperSPARC?
- * A. Original release did target UltraSPARC only. Now SuperSPARC
- *    version is provided along. Both version share bn_*comba[48]
- *    implementations (see comment later in code for explanation).
- *    But what's so special about this UltraSPARC implementation?
- *    Why didn't I let compiler do the job? Trouble is that most of
- *    available compilers (well, SC5.0 is the only exception) don't
- *    attempt to take advantage of UltraSPARC's 64-bitness under
- *    32-bit kernels even though it's perfectly possible (see next
- *    question).
- *
- * Q. 64-bit registers under 32-bit kernels? Didn't you just say it
- *    doesn't work?
- * A. You can't adress *all* registers as 64-bit wide:-( The catch is
- *    that you actually may rely upon %o0-%o5 and %g1-%g4 being fully
- *    preserved if you're in a leaf function, i.e. such never calling
- *    any other functions. All functions in this module are leaf and
- *    10 registers is a handful. And as a matter of fact none-"comba"
- *    routines don't require even that much and I could even afford to
- *    not allocate own stack frame for 'em:-)
- *
- * Q. What about 64-bit kernels?
- * A. What about 'em? Just kidding:-) Pure 64-bit version is currently
- *    under evaluation and development...
- *
- * Q. What about shared libraries?
- * A. What about 'em? Kidding again:-) Code does *not* contain any
- *    code position dependencies and it's safe to include it into
- *    shared library as is.
- *
- * Q. How much faster does it go?
- * A. Do you have a good benchmark? In either case below is what I
- *    experience with crypto/bn/expspeed.c test program:
- *
- *	v8plus module on U10/300MHz against bn_asm.c compiled with:
- *
- *	cc-5.0 -xarch=v8plus -xO5 -xdepend	+7-12%
- *	cc-4.2 -xarch=v8plus -xO5 -xdepend	+25-35%
- *	egcs-1.1.2 -mcpu=ultrasparc -O3		+35-45%
- *
- *	v8 module on SS10/60MHz against bn_asm.c compiled with:
- *
- *	cc-5.0 -xarch=v8 -xO5 -xdepend		+7-10%
- *	cc-4.2 -xarch=v8 -xO5 -xdepend		+10%
- *	egcs-1.1.2 -mv8 -O3			+35-45%
- *
- *    As you can see it's damn hard to beat the new Sun C compiler
- *    and it's in first place GNU C users who will appreciate this
- *    assembler implementation:-)	
- */
-
-/*
- * Revision history.
- *
- * 1.0	- initial release;
- * 1.1	- new loop unrolling model(*);
- *	- some more fine tuning;
- * 1.2	- made gas friendly;
- *	- updates to documentation concerning v9;
- *	- new performance comparison matrix;
- * 1.3	- fixed problem with /usr/ccs/lib/cpp;
- * 1.4	- native V9 bn_*_comba[48] implementation (15% more efficient)
- *	  resulting in slight overall performance kick;
- *	- some retunes;
- *	- support for GNU as added;
- *
- * (*)	Originally unrolled loop looked like this:
- *	    for (;;) {
- *		op(p+0); if (--n==0) break;
- *		op(p+1); if (--n==0) break;
- *		op(p+2); if (--n==0) break;
- *		op(p+3); if (--n==0) break;
- *		p+=4;
- *	    }
- *	I unroll according to following:
- *	    while (n&~3) {
- *		op(p+0); op(p+1); op(p+2); op(p+3);
- *		p+=4; n=-4;
- *	    }
- *	    if (n) {
- *		op(p+0); if (--n==0) return;
- *		op(p+2); if (--n==0) return;
- *		op(p+3); return;
- *	    }
- */
-
-/*
- * GNU assembler can't stand stuw:-(
- */
-#define stuw st
-
-.section	".text",#alloc,#execinstr
-.file		"bn_asm.sparc.v8plus.S"
-
-.align	32
-
-.global bn_mul_add_words
-/*
- * BN_ULONG bn_mul_add_words(rp,ap,num,w)
- * BN_ULONG *rp,*ap;
- * int num;
- * BN_ULONG w;
- */
-bn_mul_add_words:
-	sra	%o2,%g0,%o2	! signx %o2
-	brgz,a	%o2,.L_bn_mul_add_words_proceed
-	lduw	[%o1],%g2
-	retl
-	clr	%o0
-	nop
-	nop
-	nop
-
-.L_bn_mul_add_words_proceed:
-	srl	%o3,%g0,%o3	! clruw	%o3
-	andcc	%o2,-4,%g0
-	bz,pn	%icc,.L_bn_mul_add_words_tail
-	clr	%o5
-
-.L_bn_mul_add_words_loop:	! wow! 32 aligned!
-	lduw	[%o0],%g1
-	lduw	[%o1+4],%g3
-	mulx	%o3,%g2,%g2
-	add	%g1,%o5,%o4
-	nop
-	add	%o4,%g2,%o4
-	stuw	%o4,[%o0]
-	srlx	%o4,32,%o5
-
-	lduw	[%o0+4],%g1
-	lduw	[%o1+8],%g2
-	mulx	%o3,%g3,%g3
-	add	%g1,%o5,%o4
-	dec	4,%o2
-	add	%o4,%g3,%o4
-	stuw	%o4,[%o0+4]
-	srlx	%o4,32,%o5
-
-	lduw	[%o0+8],%g1
-	lduw	[%o1+12],%g3
-	mulx	%o3,%g2,%g2
-	add	%g1,%o5,%o4
-	inc	16,%o1
-	add	%o4,%g2,%o4
-	stuw	%o4,[%o0+8]
-	srlx	%o4,32,%o5
-
-	lduw	[%o0+12],%g1
-	mulx	%o3,%g3,%g3
-	add	%g1,%o5,%o4
-	inc	16,%o0
-	add	%o4,%g3,%o4
-	andcc	%o2,-4,%g0
-	stuw	%o4,[%o0-4]
-	srlx	%o4,32,%o5
-	bnz,a,pt	%icc,.L_bn_mul_add_words_loop
-	lduw	[%o1],%g2
-
-	brnz,a,pn	%o2,.L_bn_mul_add_words_tail
-	lduw	[%o1],%g2
-.L_bn_mul_add_words_return:
-	retl
-	mov	%o5,%o0
-
-.L_bn_mul_add_words_tail:
-	lduw	[%o0],%g1
-	mulx	%o3,%g2,%g2
-	add	%g1,%o5,%o4
-	dec	%o2
-	add	%o4,%g2,%o4
-	srlx	%o4,32,%o5
-	brz,pt	%o2,.L_bn_mul_add_words_return
-	stuw	%o4,[%o0]
-
-	lduw	[%o1+4],%g2
-	lduw	[%o0+4],%g1
-	mulx	%o3,%g2,%g2
-	add	%g1,%o5,%o4
-	dec	%o2
-	add	%o4,%g2,%o4
-	srlx	%o4,32,%o5
-	brz,pt	%o2,.L_bn_mul_add_words_return
-	stuw	%o4,[%o0+4]
-
-	lduw	[%o1+8],%g2
-	lduw	[%o0+8],%g1
-	mulx	%o3,%g2,%g2
-	add	%g1,%o5,%o4
-	add	%o4,%g2,%o4
-	stuw	%o4,[%o0+8]
-	retl
-	srlx	%o4,32,%o0
-
-.type	bn_mul_add_words,#function
-.size	bn_mul_add_words,(.-bn_mul_add_words)
-
-.align	32
-
-.global bn_mul_words
-/*
- * BN_ULONG bn_mul_words(rp,ap,num,w)
- * BN_ULONG *rp,*ap;
- * int num;
- * BN_ULONG w;
- */
-bn_mul_words:
-	sra	%o2,%g0,%o2	! signx %o2
-	brgz,a	%o2,.L_bn_mul_words_proceeed
-	lduw	[%o1],%g2
-	retl
-	clr	%o0
-	nop
-	nop
-	nop
-
-.L_bn_mul_words_proceeed:
-	srl	%o3,%g0,%o3	! clruw	%o3
-	andcc	%o2,-4,%g0
-	bz,pn	%icc,.L_bn_mul_words_tail
-	clr	%o5
-
-.L_bn_mul_words_loop:		! wow! 32 aligned!
-	lduw	[%o1+4],%g3
-	mulx	%o3,%g2,%g2
-	add	%g2,%o5,%o4
-	nop
-	stuw	%o4,[%o0]
-	srlx	%o4,32,%o5
-
-	lduw	[%o1+8],%g2
-	mulx	%o3,%g3,%g3
-	add	%g3,%o5,%o4
-	dec	4,%o2
-	stuw	%o4,[%o0+4]
-	srlx	%o4,32,%o5
-
-	lduw	[%o1+12],%g3
-	mulx	%o3,%g2,%g2
-	add	%g2,%o5,%o4
-	inc	16,%o1
-	stuw	%o4,[%o0+8]
-	srlx	%o4,32,%o5
-
-	mulx	%o3,%g3,%g3
-	add	%g3,%o5,%o4
-	inc	16,%o0
-	stuw	%o4,[%o0-4]
-	srlx	%o4,32,%o5
-	andcc	%o2,-4,%g0
-	bnz,a,pt	%icc,.L_bn_mul_words_loop
-	lduw	[%o1],%g2
-	nop
-	nop
-
-	brnz,a,pn	%o2,.L_bn_mul_words_tail
-	lduw	[%o1],%g2
-.L_bn_mul_words_return:
-	retl
-	mov	%o5,%o0
-
-.L_bn_mul_words_tail:
-	mulx	%o3,%g2,%g2
-	add	%g2,%o5,%o4
-	dec	%o2
-	srlx	%o4,32,%o5
-	brz,pt	%o2,.L_bn_mul_words_return
-	stuw	%o4,[%o0]
-
-	lduw	[%o1+4],%g2
-	mulx	%o3,%g2,%g2
-	add	%g2,%o5,%o4
-	dec	%o2
-	srlx	%o4,32,%o5
-	brz,pt	%o2,.L_bn_mul_words_return
-	stuw	%o4,[%o0+4]
-
-	lduw	[%o1+8],%g2
-	mulx	%o3,%g2,%g2
-	add	%g2,%o5,%o4
-	stuw	%o4,[%o0+8]
-	retl
-	srlx	%o4,32,%o0
-
-.type	bn_mul_words,#function
-.size	bn_mul_words,(.-bn_mul_words)
-
-.align  32
-.global	bn_sqr_words
-/*
- * void bn_sqr_words(r,a,n)
- * BN_ULONG *r,*a;
- * int n;
- */
-bn_sqr_words:
-	sra	%o2,%g0,%o2	! signx %o2
-	brgz,a	%o2,.L_bn_sqr_words_proceeed
-	lduw	[%o1],%g2
-	retl
-	clr	%o0
-	nop
-	nop
-	nop
-
-.L_bn_sqr_words_proceeed:
-	andcc	%o2,-4,%g0
-	nop
-	bz,pn	%icc,.L_bn_sqr_words_tail
-	nop
-
-.L_bn_sqr_words_loop:		! wow! 32 aligned!
-	lduw	[%o1+4],%g3
-	mulx	%g2,%g2,%o4
-	stuw	%o4,[%o0]
-	srlx	%o4,32,%o5
-	stuw	%o5,[%o0+4]
-	nop
-
-	lduw	[%o1+8],%g2
-	mulx	%g3,%g3,%o4
-	dec	4,%o2
-	stuw	%o4,[%o0+8]
-	srlx	%o4,32,%o5
-	stuw	%o5,[%o0+12]
-
-	lduw	[%o1+12],%g3
-	mulx	%g2,%g2,%o4
-	srlx	%o4,32,%o5
-	stuw	%o4,[%o0+16]
-	inc	16,%o1
-	stuw	%o5,[%o0+20]
-
-	mulx	%g3,%g3,%o4
-	inc	32,%o0
-	stuw	%o4,[%o0-8]
-	srlx	%o4,32,%o5
-	andcc	%o2,-4,%g2
-	stuw	%o5,[%o0-4]
-	bnz,a,pt	%icc,.L_bn_sqr_words_loop
-	lduw	[%o1],%g2
-	nop
-
-	brnz,a,pn	%o2,.L_bn_sqr_words_tail
-	lduw	[%o1],%g2
-.L_bn_sqr_words_return:
-	retl
-	clr	%o0
-
-.L_bn_sqr_words_tail:
-	mulx	%g2,%g2,%o4
-	dec	%o2
-	stuw	%o4,[%o0]
-	srlx	%o4,32,%o5
-	brz,pt	%o2,.L_bn_sqr_words_return
-	stuw	%o5,[%o0+4]
-
-	lduw	[%o1+4],%g2
-	mulx	%g2,%g2,%o4
-	dec	%o2
-	stuw	%o4,[%o0+8]
-	srlx	%o4,32,%o5
-	brz,pt	%o2,.L_bn_sqr_words_return
-	stuw	%o5,[%o0+12]
-
-	lduw	[%o1+8],%g2
-	mulx	%g2,%g2,%o4
-	srlx	%o4,32,%o5
-	stuw	%o4,[%o0+16]
-	stuw	%o5,[%o0+20]
-	retl
-	clr	%o0
-
-.type	bn_sqr_words,#function
-.size	bn_sqr_words,(.-bn_sqr_words)
-
-.align	32
-.global bn_div_words
-/*
- * BN_ULONG bn_div_words(h,l,d)
- * BN_ULONG h,l,d;
- */
-bn_div_words:
-	sllx	%o0,32,%o0
-	or	%o0,%o1,%o0
-	udivx	%o0,%o2,%o0
-	retl
-	srl	%o0,%g0,%o0	! clruw	%o0
-
-.type	bn_div_words,#function
-.size	bn_div_words,(.-bn_div_words)
-
-.align	32
-
-.global bn_add_words
-/*
- * BN_ULONG bn_add_words(rp,ap,bp,n)
- * BN_ULONG *rp,*ap,*bp;
- * int n;
- */
-bn_add_words:
-	sra	%o3,%g0,%o3	! signx %o3
-	brgz,a	%o3,.L_bn_add_words_proceed
-	lduw	[%o1],%o4
-	retl
-	clr	%o0
-
-.L_bn_add_words_proceed:
-	andcc	%o3,-4,%g0
-	bz,pn	%icc,.L_bn_add_words_tail
-	addcc	%g0,0,%g0	! clear carry flag
-
-.L_bn_add_words_loop:		! wow! 32 aligned!
-	dec	4,%o3
-	lduw	[%o2],%o5
-	lduw	[%o1+4],%g1
-	lduw	[%o2+4],%g2
-	lduw	[%o1+8],%g3
-	lduw	[%o2+8],%g4
-	addccc	%o5,%o4,%o5
-	stuw	%o5,[%o0]
-
-	lduw	[%o1+12],%o4
-	lduw	[%o2+12],%o5
-	inc	16,%o1
-	addccc	%g1,%g2,%g1
-	stuw	%g1,[%o0+4]
-	
-	inc	16,%o2
-	addccc	%g3,%g4,%g3
-	stuw	%g3,[%o0+8]
-
-	inc	16,%o0
-	addccc	%o5,%o4,%o5
-	stuw	%o5,[%o0-4]
-	and	%o3,-4,%g1
-	brnz,a,pt	%g1,.L_bn_add_words_loop
-	lduw	[%o1],%o4
-
-	brnz,a,pn	%o3,.L_bn_add_words_tail
-	lduw	[%o1],%o4
-.L_bn_add_words_return:
-	clr	%o0
-	retl
-	movcs	%icc,1,%o0
-	nop
-
-.L_bn_add_words_tail:
-	lduw	[%o2],%o5
-	dec	%o3
-	addccc	%o5,%o4,%o5
-	brz,pt	%o3,.L_bn_add_words_return
-	stuw	%o5,[%o0]
-
-	lduw	[%o1+4],%o4
-	lduw	[%o2+4],%o5
-	dec	%o3
-	addccc	%o5,%o4,%o5
-	brz,pt	%o3,.L_bn_add_words_return
-	stuw	%o5,[%o0+4]
-
-	lduw	[%o1+8],%o4
-	lduw	[%o2+8],%o5
-	addccc	%o5,%o4,%o5
-	stuw	%o5,[%o0+8]
-	clr	%o0
-	retl
-	movcs	%icc,1,%o0
-
-.type	bn_add_words,#function
-.size	bn_add_words,(.-bn_add_words)
-
-.global bn_sub_words
-/*
- * BN_ULONG bn_sub_words(rp,ap,bp,n)
- * BN_ULONG *rp,*ap,*bp;
- * int n;
- */
-bn_sub_words:
-	sra	%o3,%g0,%o3	! signx %o3
-	brgz,a	%o3,.L_bn_sub_words_proceed
-	lduw	[%o1],%o4
-	retl
-	clr	%o0
-
-.L_bn_sub_words_proceed:
-	andcc	%o3,-4,%g0
-	bz,pn	%icc,.L_bn_sub_words_tail
-	addcc	%g0,0,%g0	! clear carry flag
-
-.L_bn_sub_words_loop:		! wow! 32 aligned!
-	dec	4,%o3
-	lduw	[%o2],%o5
-	lduw	[%o1+4],%g1
-	lduw	[%o2+4],%g2
-	lduw	[%o1+8],%g3
-	lduw	[%o2+8],%g4
-	subccc	%o4,%o5,%o5
-	stuw	%o5,[%o0]
-
-	lduw	[%o1+12],%o4
-	lduw	[%o2+12],%o5
-	inc	16,%o1
-	subccc	%g1,%g2,%g2
-	stuw	%g2,[%o0+4]
-
-	inc	16,%o2
-	subccc	%g3,%g4,%g4
-	stuw	%g4,[%o0+8]
-
-	inc	16,%o0
-	subccc	%o4,%o5,%o5
-	stuw	%o5,[%o0-4]
-	and	%o3,-4,%g1
-	brnz,a,pt	%g1,.L_bn_sub_words_loop
-	lduw	[%o1],%o4
-
-	brnz,a,pn	%o3,.L_bn_sub_words_tail
-	lduw	[%o1],%o4
-.L_bn_sub_words_return:
-	clr	%o0
-	retl
-	movcs	%icc,1,%o0
-	nop
-
-.L_bn_sub_words_tail:		! wow! 32 aligned!
-	lduw	[%o2],%o5
-	dec	%o3
-	subccc	%o4,%o5,%o5
-	brz,pt	%o3,.L_bn_sub_words_return
-	stuw	%o5,[%o0]
-
-	lduw	[%o1+4],%o4
-	lduw	[%o2+4],%o5
-	dec	%o3
-	subccc	%o4,%o5,%o5
-	brz,pt	%o3,.L_bn_sub_words_return
-	stuw	%o5,[%o0+4]
-
-	lduw	[%o1+8],%o4
-	lduw	[%o2+8],%o5
-	subccc	%o4,%o5,%o5
-	stuw	%o5,[%o0+8]
-	clr	%o0
-	retl
-	movcs	%icc,1,%o0
-
-.type	bn_sub_words,#function
-.size	bn_sub_words,(.-bn_sub_words)
-
-/*
- * Code below depends on the fact that upper parts of the %l0-%l7
- * and %i0-%i7 are zeroed by kernel after context switch. In
- * previous versions this comment stated that "the trouble is that
- * it's not feasible to implement the mumbo-jumbo in less V9
- * instructions:-(" which apparently isn't true thanks to
- * 'bcs,a %xcc,.+8; inc %rd' pair. But the performance improvement
- * results not from the shorter code, but from elimination of
- * multicycle none-pairable 'rd %y,%rd' instructions.
- *
- *							Andy.
- */
-
-#define FRAME_SIZE	-96
-
-/*
- * Here is register usage map for *all* routines below.
- */
-#define t_1	%o0
-#define	t_2	%o1
-#define c_12	%o2
-#define c_3	%o3
-
-#define ap(I)	[%i1+4*I]
-#define bp(I)	[%i2+4*I]
-#define rp(I)	[%i0+4*I]
-
-#define	a_0	%l0
-#define	a_1	%l1
-#define	a_2	%l2
-#define	a_3	%l3
-#define	a_4	%l4
-#define	a_5	%l5
-#define	a_6	%l6
-#define	a_7	%l7
-
-#define	b_0	%i3
-#define	b_1	%i4
-#define	b_2	%i5
-#define	b_3	%o4
-#define	b_4	%o5
-#define	b_5	%o7
-#define	b_6	%g1
-#define	b_7	%g4
-
-.align	32
-.global bn_mul_comba8
-/*
- * void bn_mul_comba8(r,a,b)
- * BN_ULONG *r,*a,*b;
- */
-bn_mul_comba8:
-	save	%sp,FRAME_SIZE,%sp
-	mov	1,t_2
-	lduw	ap(0),a_0
-	sllx	t_2,32,t_2
-	lduw	bp(0),b_0	!=
-	lduw	bp(1),b_1
-	mulx	a_0,b_0,t_1	!mul_add_c(a[0],b[0],c1,c2,c3);
-	srlx	t_1,32,c_12
-	stuw	t_1,rp(0)	!=!r[0]=c1;
-
-	lduw	ap(1),a_1
-	mulx	a_0,b_1,t_1	!mul_add_c(a[0],b[1],c2,c3,c1);
-	addcc	c_12,t_1,c_12
-	clr	c_3		!=
-	bcs,a	%xcc,.+8
-	add	c_3,t_2,c_3
-	lduw	ap(2),a_2
-	mulx	a_1,b_0,t_1	!=!mul_add_c(a[1],b[0],c2,c3,c1);
-	addcc	c_12,t_1,t_1
-	bcs,a	%xcc,.+8
-	add	c_3,t_2,c_3
-	srlx	t_1,32,c_12	!=
-	stuw	t_1,rp(1)	!r[1]=c2;
-	or	c_12,c_3,c_12
-
-	mulx	a_2,b_0,t_1	!mul_add_c(a[2],b[0],c3,c1,c2);
-	addcc	c_12,t_1,c_12	!=
-	clr	c_3
-	bcs,a	%xcc,.+8
-	add	c_3,t_2,c_3
-	lduw	bp(2),b_2	!=
-	mulx	a_1,b_1,t_1	!mul_add_c(a[1],b[1],c3,c1,c2);
-	addcc	c_12,t_1,c_12
-	bcs,a	%xcc,.+8
-	add	c_3,t_2,c_3	!=
-	lduw	bp(3),b_3
-	mulx	a_0,b_2,t_1	!mul_add_c(a[0],b[2],c3,c1,c2);
-	addcc	c_12,t_1,t_1
-	bcs,a	%xcc,.+8	!=
-	add	c_3,t_2,c_3
-	srlx	t_1,32,c_12
-	stuw	t_1,rp(2)	!r[2]=c3;
-	or	c_12,c_3,c_12	!=
-
-	mulx	a_0,b_3,t_1	!mul_add_c(a[0],b[3],c1,c2,c3);
-	addcc	c_12,t_1,c_12
-	clr	c_3
-	bcs,a	%xcc,.+8	!=
-	add	c_3,t_2,c_3
-	mulx	a_1,b_2,t_1	!=!mul_add_c(a[1],b[2],c1,c2,c3);
-	addcc	c_12,t_1,c_12
-	bcs,a	%xcc,.+8	!=
-	add	c_3,t_2,c_3
-	lduw	ap(3),a_3
-	mulx	a_2,b_1,t_1	!mul_add_c(a[2],b[1],c1,c2,c3);
-	addcc	c_12,t_1,c_12	!=
-	bcs,a	%xcc,.+8
-	add	c_3,t_2,c_3
-	lduw	ap(4),a_4
-	mulx	a_3,b_0,t_1	!=!mul_add_c(a[3],b[0],c1,c2,c3);!=
-	addcc	c_12,t_1,t_1
-	bcs,a	%xcc,.+8
-	add	c_3,t_2,c_3
-	srlx	t_1,32,c_12	!=
-	stuw	t_1,rp(3)	!r[3]=c1;
-	or	c_12,c_3,c_12
-
-	mulx	a_4,b_0,t_1	!mul_add_c(a[4],b[0],c2,c3,c1);
-	addcc	c_12,t_1,c_12	!=
-	clr	c_3
-	bcs,a	%xcc,.+8
-	add	c_3,t_2,c_3
-	mulx	a_3,b_1,t_1	!=!mul_add_c(a[3],b[1],c2,c3,c1);
-	addcc	c_12,t_1,c_12
-	bcs,a	%xcc,.+8
-	add	c_3,t_2,c_3
-	mulx	a_2,b_2,t_1	!=!mul_add_c(a[2],b[2],c2,c3,c1);
-	addcc	c_12,t_1,c_12
-	bcs,a	%xcc,.+8
-	add	c_3,t_2,c_3
-	lduw	bp(4),b_4	!=
-	mulx	a_1,b_3,t_1	!mul_add_c(a[1],b[3],c2,c3,c1);
-	addcc	c_12,t_1,c_12
-	bcs,a	%xcc,.+8
-	add	c_3,t_2,c_3	!=
-	lduw	bp(5),b_5
-	mulx	a_0,b_4,t_1	!mul_add_c(a[0],b[4],c2,c3,c1);
-	addcc	c_12,t_1,t_1
-	bcs,a	%xcc,.+8	!=
-	add	c_3,t_2,c_3
-	srlx	t_1,32,c_12
-	stuw	t_1,rp(4)	!r[4]=c2;
-	or	c_12,c_3,c_12	!=
-
-	mulx	a_0,b_5,t_1	!mul_add_c(a[0],b[5],c3,c1,c2);
-	addcc	c_12,t_1,c_12
-	clr	c_3
-	bcs,a	%xcc,.+8	!=
-	add	c_3,t_2,c_3
-	mulx	a_1,b_4,t_1	!mul_add_c(a[1],b[4],c3,c1,c2);
-	addcc	c_12,t_1,c_12
-	bcs,a	%xcc,.+8	!=
-	add	c_3,t_2,c_3
-	mulx	a_2,b_3,t_1	!mul_add_c(a[2],b[3],c3,c1,c2);
-	addcc	c_12,t_1,c_12
-	bcs,a	%xcc,.+8	!=
-	add	c_3,t_2,c_3
-	mulx	a_3,b_2,t_1	!mul_add_c(a[3],b[2],c3,c1,c2);
-	addcc	c_12,t_1,c_12
-	bcs,a	%xcc,.+8	!=
-	add	c_3,t_2,c_3
-	lduw	ap(5),a_5
-	mulx	a_4,b_1,t_1	!mul_add_c(a[4],b[1],c3,c1,c2);
-	addcc	c_12,t_1,c_12	!=
-	bcs,a	%xcc,.+8
-	add	c_3,t_2,c_3
-	lduw	ap(6),a_6
-	mulx	a_5,b_0,t_1	!=!mul_add_c(a[5],b[0],c3,c1,c2);
-	addcc	c_12,t_1,t_1
-	bcs,a	%xcc,.+8
-	add	c_3,t_2,c_3
-	srlx	t_1,32,c_12	!=
-	stuw	t_1,rp(5)	!r[5]=c3;
-	or	c_12,c_3,c_12
-
-	mulx	a_6,b_0,t_1	!mul_add_c(a[6],b[0],c1,c2,c3);
-	addcc	c_12,t_1,c_12	!=
-	clr	c_3
-	bcs,a	%xcc,.+8
-	add	c_3,t_2,c_3
-	mulx	a_5,b_1,t_1	!=!mul_add_c(a[5],b[1],c1,c2,c3);
-	addcc	c_12,t_1,c_12
-	bcs,a	%xcc,.+8
-	add	c_3,t_2,c_3
-	mulx	a_4,b_2,t_1	!=!mul_add_c(a[4],b[2],c1,c2,c3);
-	addcc	c_12,t_1,c_12
-	bcs,a	%xcc,.+8
-	add	c_3,t_2,c_3
-	mulx	a_3,b_3,t_1	!=!mul_add_c(a[3],b[3],c1,c2,c3);
-	addcc	c_12,t_1,c_12
-	bcs,a	%xcc,.+8
-	add	c_3,t_2,c_3
-	mulx	a_2,b_4,t_1	!=!mul_add_c(a[2],b[4],c1,c2,c3);
-	addcc	c_12,t_1,c_12
-	bcs,a	%xcc,.+8
-	add	c_3,t_2,c_3
-	lduw	bp(6),b_6	!=
-	mulx	a_1,b_5,t_1	!mul_add_c(a[1],b[5],c1,c2,c3);
-	addcc	c_12,t_1,c_12
-	bcs,a	%xcc,.+8
-	add	c_3,t_2,c_3	!=
-	lduw	bp(7),b_7
-	mulx	a_0,b_6,t_1	!mul_add_c(a[0],b[6],c1,c2,c3);
-	addcc	c_12,t_1,t_1
-	bcs,a	%xcc,.+8	!=
-	add	c_3,t_2,c_3
-	srlx	t_1,32,c_12
-	stuw	t_1,rp(6)	!r[6]=c1;
-	or	c_12,c_3,c_12	!=
-
-	mulx	a_0,b_7,t_1	!mul_add_c(a[0],b[7],c2,c3,c1);
-	addcc	c_12,t_1,c_12
-	clr	c_3
-	bcs,a	%xcc,.+8	!=
-	add	c_3,t_2,c_3
-	mulx	a_1,b_6,t_1	!mul_add_c(a[1],b[6],c2,c3,c1);
-	addcc	c_12,t_1,c_12
-	bcs,a	%xcc,.+8	!=
-	add	c_3,t_2,c_3
-	mulx	a_2,b_5,t_1	!mul_add_c(a[2],b[5],c2,c3,c1);
-	addcc	c_12,t_1,c_12
-	bcs,a	%xcc,.+8	!=
-	add	c_3,t_2,c_3
-	mulx	a_3,b_4,t_1	!mul_add_c(a[3],b[4],c2,c3,c1);
-	addcc	c_12,t_1,c_12
-	bcs,a	%xcc,.+8	!=
-	add	c_3,t_2,c_3
-	mulx	a_4,b_3,t_1	!mul_add_c(a[4],b[3],c2,c3,c1);
-	addcc	c_12,t_1,c_12
-	bcs,a	%xcc,.+8	!=
-	add	c_3,t_2,c_3
-	mulx	a_5,b_2,t_1	!mul_add_c(a[5],b[2],c2,c3,c1);
-	addcc	c_12,t_1,c_12
-	bcs,a	%xcc,.+8	!=
-	add	c_3,t_2,c_3
-	lduw	ap(7),a_7
-	mulx	a_6,b_1,t_1	!=!mul_add_c(a[6],b[1],c2,c3,c1);
-	addcc	c_12,t_1,c_12
-	bcs,a	%xcc,.+8
-	add	c_3,t_2,c_3
-	mulx	a_7,b_0,t_1	!=!mul_add_c(a[7],b[0],c2,c3,c1);
-	addcc	c_12,t_1,t_1
-	bcs,a	%xcc,.+8
-	add	c_3,t_2,c_3
-	srlx	t_1,32,c_12	!=
-	stuw	t_1,rp(7)	!r[7]=c2;
-	or	c_12,c_3,c_12
-
-	mulx	a_7,b_1,t_1	!=!mul_add_c(a[7],b[1],c3,c1,c2);
-	addcc	c_12,t_1,c_12
-	clr	c_3
-	bcs,a	%xcc,.+8
-	add	c_3,t_2,c_3	!=
-	mulx	a_6,b_2,t_1	!mul_add_c(a[6],b[2],c3,c1,c2);
-	addcc	c_12,t_1,c_12
-	bcs,a	%xcc,.+8
-	add	c_3,t_2,c_3	!=
-	mulx	a_5,b_3,t_1	!mul_add_c(a[5],b[3],c3,c1,c2);
-	addcc	c_12,t_1,c_12
-	bcs,a	%xcc,.+8
-	add	c_3,t_2,c_3	!=
-	mulx	a_4,b_4,t_1	!mul_add_c(a[4],b[4],c3,c1,c2);
-	addcc	c_12,t_1,c_12
-	bcs,a	%xcc,.+8
-	add	c_3,t_2,c_3	!=
-	mulx	a_3,b_5,t_1	!mul_add_c(a[3],b[5],c3,c1,c2);
-	addcc	c_12,t_1,c_12
-	bcs,a	%xcc,.+8
-	add	c_3,t_2,c_3	!=
-	mulx	a_2,b_6,t_1	!mul_add_c(a[2],b[6],c3,c1,c2);
-	addcc	c_12,t_1,c_12
-	bcs,a	%xcc,.+8
-	add	c_3,t_2,c_3	!=
-	mulx	a_1,b_7,t_1	!mul_add_c(a[1],b[7],c3,c1,c2);
-	addcc	c_12,t_1,t_1
-	bcs,a	%xcc,.+8
-	add	c_3,t_2,c_3	!=
-	srlx	t_1,32,c_12
-	stuw	t_1,rp(8)	!r[8]=c3;
-	or	c_12,c_3,c_12
-
-	mulx	a_2,b_7,t_1	!=!mul_add_c(a[2],b[7],c1,c2,c3);
-	addcc	c_12,t_1,c_12
-	clr	c_3
-	bcs,a	%xcc,.+8
-	add	c_3,t_2,c_3	!=
-	mulx	a_3,b_6,t_1	!mul_add_c(a[3],b[6],c1,c2,c3);
-	addcc	c_12,t_1,c_12
-	bcs,a	%xcc,.+8	!=
-	add	c_3,t_2,c_3
-	mulx	a_4,b_5,t_1	!mul_add_c(a[4],b[5],c1,c2,c3);
-	addcc	c_12,t_1,c_12
-	bcs,a	%xcc,.+8	!=
-	add	c_3,t_2,c_3
-	mulx	a_5,b_4,t_1	!mul_add_c(a[5],b[4],c1,c2,c3);
-	addcc	c_12,t_1,c_12
-	bcs,a	%xcc,.+8	!=
-	add	c_3,t_2,c_3
-	mulx	a_6,b_3,t_1	!mul_add_c(a[6],b[3],c1,c2,c3);
-	addcc	c_12,t_1,c_12
-	bcs,a	%xcc,.+8	!=
-	add	c_3,t_2,c_3
-	mulx	a_7,b_2,t_1	!mul_add_c(a[7],b[2],c1,c2,c3);
-	addcc	c_12,t_1,t_1
-	bcs,a	%xcc,.+8	!=
-	add	c_3,t_2,c_3
-	srlx	t_1,32,c_12
-	stuw	t_1,rp(9)	!r[9]=c1;
-	or	c_12,c_3,c_12	!=
-
-	mulx	a_7,b_3,t_1	!mul_add_c(a[7],b[3],c2,c3,c1);
-	addcc	c_12,t_1,c_12
-	clr	c_3
-	bcs,a	%xcc,.+8	!=
-	add	c_3,t_2,c_3
-	mulx	a_6,b_4,t_1	!mul_add_c(a[6],b[4],c2,c3,c1);
-	addcc	c_12,t_1,c_12
-	bcs,a	%xcc,.+8	!=
-	add	c_3,t_2,c_3
-	mulx	a_5,b_5,t_1	!mul_add_c(a[5],b[5],c2,c3,c1);
-	addcc	c_12,t_1,c_12
-	bcs,a	%xcc,.+8	!=
-	add	c_3,t_2,c_3
-	mulx	a_4,b_6,t_1	!mul_add_c(a[4],b[6],c2,c3,c1);
-	addcc	c_12,t_1,c_12
-	bcs,a	%xcc,.+8	!=
-	add	c_3,t_2,c_3
-	mulx	a_3,b_7,t_1	!mul_add_c(a[3],b[7],c2,c3,c1);
-	addcc	c_12,t_1,t_1
-	bcs,a	%xcc,.+8	!=
-	add	c_3,t_2,c_3
-	srlx	t_1,32,c_12
-	stuw	t_1,rp(10)	!r[10]=c2;
-	or	c_12,c_3,c_12	!=
-
-	mulx	a_4,b_7,t_1	!mul_add_c(a[4],b[7],c3,c1,c2);
-	addcc	c_12,t_1,c_12
-	clr	c_3
-	bcs,a	%xcc,.+8	!=
-	add	c_3,t_2,c_3
-	mulx	a_5,b_6,t_1	!mul_add_c(a[5],b[6],c3,c1,c2);
-	addcc	c_12,t_1,c_12
-	bcs,a	%xcc,.+8	!=
-	add	c_3,t_2,c_3
-	mulx	a_6,b_5,t_1	!mul_add_c(a[6],b[5],c3,c1,c2);
-	addcc	c_12,t_1,c_12
-	bcs,a	%xcc,.+8	!=
-	add	c_3,t_2,c_3
-	mulx	a_7,b_4,t_1	!mul_add_c(a[7],b[4],c3,c1,c2);
-	addcc	c_12,t_1,t_1
-	bcs,a	%xcc,.+8	!=
-	add	c_3,t_2,c_3
-	srlx	t_1,32,c_12
-	stuw	t_1,rp(11)	!r[11]=c3;
-	or	c_12,c_3,c_12	!=
-
-	mulx	a_7,b_5,t_1	!mul_add_c(a[7],b[5],c1,c2,c3);
-	addcc	c_12,t_1,c_12
-	clr	c_3
-	bcs,a	%xcc,.+8	!=
-	add	c_3,t_2,c_3
-	mulx	a_6,b_6,t_1	!mul_add_c(a[6],b[6],c1,c2,c3);
-	addcc	c_12,t_1,c_12
-	bcs,a	%xcc,.+8	!=
-	add	c_3,t_2,c_3
-	mulx	a_5,b_7,t_1	!mul_add_c(a[5],b[7],c1,c2,c3);
-	addcc	c_12,t_1,t_1
-	bcs,a	%xcc,.+8	!=
-	add	c_3,t_2,c_3
-	srlx	t_1,32,c_12
-	stuw	t_1,rp(12)	!r[12]=c1;
-	or	c_12,c_3,c_12	!=
-
-	mulx	a_6,b_7,t_1	!mul_add_c(a[6],b[7],c2,c3,c1);
-	addcc	c_12,t_1,c_12
-	clr	c_3
-	bcs,a	%xcc,.+8	!=
-	add	c_3,t_2,c_3
-	mulx	a_7,b_6,t_1	!mul_add_c(a[7],b[6],c2,c3,c1);
-	addcc	c_12,t_1,t_1
-	bcs,a	%xcc,.+8	!=
-	add	c_3,t_2,c_3
-	srlx	t_1,32,c_12
-	st	t_1,rp(13)	!r[13]=c2;
-	or	c_12,c_3,c_12	!=
-
-	mulx	a_7,b_7,t_1	!mul_add_c(a[7],b[7],c3,c1,c2);
-	addcc	c_12,t_1,t_1
-	srlx	t_1,32,c_12	!=
-	stuw	t_1,rp(14)	!r[14]=c3;
-	stuw	c_12,rp(15)	!r[15]=c1;
-
-	ret
-	restore	%g0,%g0,%o0	!=
-
-.type	bn_mul_comba8,#function
-.size	bn_mul_comba8,(.-bn_mul_comba8)
-
-.align	32
-
-.global bn_mul_comba4
-/*
- * void bn_mul_comba4(r,a,b)
- * BN_ULONG *r,*a,*b;
- */
-bn_mul_comba4:
-	save	%sp,FRAME_SIZE,%sp
-	lduw	ap(0),a_0
-	mov	1,t_2
-	lduw	bp(0),b_0
-	sllx	t_2,32,t_2	!=
-	lduw	bp(1),b_1
-	mulx	a_0,b_0,t_1	!mul_add_c(a[0],b[0],c1,c2,c3);
-	srlx	t_1,32,c_12
-	stuw	t_1,rp(0)	!=!r[0]=c1;
-
-	lduw	ap(1),a_1
-	mulx	a_0,b_1,t_1	!mul_add_c(a[0],b[1],c2,c3,c1);
-	addcc	c_12,t_1,c_12
-	clr	c_3		!=
-	bcs,a	%xcc,.+8
-	add	c_3,t_2,c_3
-	lduw	ap(2),a_2
-	mulx	a_1,b_0,t_1	!=!mul_add_c(a[1],b[0],c2,c3,c1);
-	addcc	c_12,t_1,t_1
-	bcs,a	%xcc,.+8
-	add	c_3,t_2,c_3
-	srlx	t_1,32,c_12	!=
-	stuw	t_1,rp(1)	!r[1]=c2;
-	or	c_12,c_3,c_12
-
-	mulx	a_2,b_0,t_1	!mul_add_c(a[2],b[0],c3,c1,c2);
-	addcc	c_12,t_1,c_12	!=
-	clr	c_3
-	bcs,a	%xcc,.+8
-	add	c_3,t_2,c_3
-	lduw	bp(2),b_2	!=
-	mulx	a_1,b_1,t_1	!mul_add_c(a[1],b[1],c3,c1,c2);
-	addcc	c_12,t_1,c_12
-	bcs,a	%xcc,.+8
-	add	c_3,t_2,c_3	!=
-	lduw	bp(3),b_3
-	mulx	a_0,b_2,t_1	!mul_add_c(a[0],b[2],c3,c1,c2);
-	addcc	c_12,t_1,t_1
-	bcs,a	%xcc,.+8	!=
-	add	c_3,t_2,c_3
-	srlx	t_1,32,c_12
-	stuw	t_1,rp(2)	!r[2]=c3;
-	or	c_12,c_3,c_12	!=
-
-	mulx	a_0,b_3,t_1	!mul_add_c(a[0],b[3],c1,c2,c3);
-	addcc	c_12,t_1,c_12
-	clr	c_3
-	bcs,a	%xcc,.+8	!=
-	add	c_3,t_2,c_3
-	mulx	a_1,b_2,t_1	!mul_add_c(a[1],b[2],c1,c2,c3);
-	addcc	c_12,t_1,c_12
-	bcs,a	%xcc,.+8	!=
-	add	c_3,t_2,c_3
-	lduw	ap(3),a_3
-	mulx	a_2,b_1,t_1	!mul_add_c(a[2],b[1],c1,c2,c3);
-	addcc	c_12,t_1,c_12	!=
-	bcs,a	%xcc,.+8
-	add	c_3,t_2,c_3
-	mulx	a_3,b_0,t_1	!mul_add_c(a[3],b[0],c1,c2,c3);!=
-	addcc	c_12,t_1,t_1	!=
-	bcs,a	%xcc,.+8
-	add	c_3,t_2,c_3
-	srlx	t_1,32,c_12
-	stuw	t_1,rp(3)	!=!r[3]=c1;
-	or	c_12,c_3,c_12
-
-	mulx	a_3,b_1,t_1	!mul_add_c(a[3],b[1],c2,c3,c1);
-	addcc	c_12,t_1,c_12
-	clr	c_3		!=
-	bcs,a	%xcc,.+8
-	add	c_3,t_2,c_3
-	mulx	a_2,b_2,t_1	!mul_add_c(a[2],b[2],c2,c3,c1);
-	addcc	c_12,t_1,c_12	!=
-	bcs,a	%xcc,.+8
-	add	c_3,t_2,c_3
-	mulx	a_1,b_3,t_1	!mul_add_c(a[1],b[3],c2,c3,c1);
-	addcc	c_12,t_1,t_1	!=
-	bcs,a	%xcc,.+8
-	add	c_3,t_2,c_3
-	srlx	t_1,32,c_12
-	stuw	t_1,rp(4)	!=!r[4]=c2;
-	or	c_12,c_3,c_12
-
-	mulx	a_2,b_3,t_1	!mul_add_c(a[2],b[3],c3,c1,c2);
-	addcc	c_12,t_1,c_12
-	clr	c_3		!=
-	bcs,a	%xcc,.+8
-	add	c_3,t_2,c_3
-	mulx	a_3,b_2,t_1	!mul_add_c(a[3],b[2],c3,c1,c2);
-	addcc	c_12,t_1,t_1	!=
-	bcs,a	%xcc,.+8
-	add	c_3,t_2,c_3
-	srlx	t_1,32,c_12
-	stuw	t_1,rp(5)	!=!r[5]=c3;
-	or	c_12,c_3,c_12
-
-	mulx	a_3,b_3,t_1	!mul_add_c(a[3],b[3],c1,c2,c3);
-	addcc	c_12,t_1,t_1
-	srlx	t_1,32,c_12	!=
-	stuw	t_1,rp(6)	!r[6]=c1;
-	stuw	c_12,rp(7)	!r[7]=c2;
-	
-	ret
-	restore	%g0,%g0,%o0
-
-.type	bn_mul_comba4,#function
-.size	bn_mul_comba4,(.-bn_mul_comba4)
-
-.align	32
-
-.global bn_sqr_comba8
-bn_sqr_comba8:
-	save	%sp,FRAME_SIZE,%sp
-	mov	1,t_2
-	lduw	ap(0),a_0
-	sllx	t_2,32,t_2
-	lduw	ap(1),a_1
-	mulx	a_0,a_0,t_1	!sqr_add_c(a,0,c1,c2,c3);
-	srlx	t_1,32,c_12
-	stuw	t_1,rp(0)	!r[0]=c1;
-
-	lduw	ap(2),a_2
-	mulx	a_0,a_1,t_1	!=!sqr_add_c2(a,1,0,c2,c3,c1);
-	addcc	c_12,t_1,c_12
-	clr	c_3
-	bcs,a	%xcc,.+8
-	add	c_3,t_2,c_3
-	addcc	c_12,t_1,t_1
-	bcs,a	%xcc,.+8
-	add	c_3,t_2,c_3
-	srlx	t_1,32,c_12
-	stuw	t_1,rp(1)	!r[1]=c2;
-	or	c_12,c_3,c_12
-
-	mulx	a_2,a_0,t_1	!sqr_add_c2(a,2,0,c3,c1,c2);
-	addcc	c_12,t_1,c_12
-	clr	c_3
-	bcs,a	%xcc,.+8
-	add	c_3,t_2,c_3
-	addcc	c_12,t_1,c_12
-	bcs,a	%xcc,.+8
-	add	c_3,t_2,c_3
-	lduw	ap(3),a_3
-	mulx	a_1,a_1,t_1	!sqr_add_c(a,1,c3,c1,c2);
-	addcc	c_12,t_1,t_1
-	bcs,a	%xcc,.+8
-	add	c_3,t_2,c_3
-	srlx	t_1,32,c_12
-	stuw	t_1,rp(2)	!r[2]=c3;
-	or	c_12,c_3,c_12
-
-	mulx	a_0,a_3,t_1	!sqr_add_c2(a,3,0,c1,c2,c3);
-	addcc	c_12,t_1,c_12
-	clr	c_3
-	bcs,a	%xcc,.+8
-	add	c_3,t_2,c_3
-	addcc	c_12,t_1,c_12
-	bcs,a	%xcc,.+8
-	add	c_3,t_2,c_3
-	lduw	ap(4),a_4
-	mulx	a_1,a_2,t_1	!sqr_add_c2(a,2,1,c1,c2,c3);
-	addcc	c_12,t_1,c_12
-	bcs,a	%xcc,.+8
-	add	c_3,t_2,c_3
-	addcc	c_12,t_1,t_1
-	bcs,a	%xcc,.+8
-	add	c_3,t_2,c_3
-	srlx	t_1,32,c_12
-	st	t_1,rp(3)	!r[3]=c1;
-	or	c_12,c_3,c_12
-
-	mulx	a_4,a_0,t_1	!sqr_add_c2(a,4,0,c2,c3,c1);
-	addcc	c_12,t_1,c_12
-	clr	c_3
-	bcs,a	%xcc,.+8
-	add	c_3,t_2,c_3
-	addcc	c_12,t_1,c_12
-	bcs,a	%xcc,.+8
-	add	c_3,t_2,c_3
-	mulx	a_3,a_1,t_1	!sqr_add_c2(a,3,1,c2,c3,c1);
-	addcc	c_12,t_1,c_12
-	bcs,a	%xcc,.+8
-	add	c_3,t_2,c_3
-	addcc	c_12,t_1,c_12
-	bcs,a	%xcc,.+8
-	add	c_3,t_2,c_3
-	lduw	ap(5),a_5
-	mulx	a_2,a_2,t_1	!sqr_add_c(a,2,c2,c3,c1);
-	addcc	c_12,t_1,t_1
-	bcs,a	%xcc,.+8
-	add	c_3,t_2,c_3
-	srlx	t_1,32,c_12
-	stuw	t_1,rp(4)	!r[4]=c2;
-	or	c_12,c_3,c_12
-
-	mulx	a_0,a_5,t_1	!sqr_add_c2(a,5,0,c3,c1,c2);
-	addcc	c_12,t_1,c_12
-	clr	c_3
-	bcs,a	%xcc,.+8
-	add	c_3,t_2,c_3
-	addcc	c_12,t_1,c_12
-	bcs,a	%xcc,.+8
-	add	c_3,t_2,c_3
-	mulx	a_1,a_4,t_1	!sqr_add_c2(a,4,1,c3,c1,c2);
-	addcc	c_12,t_1,c_12
-	bcs,a	%xcc,.+8
-	add	c_3,t_2,c_3
-	addcc	c_12,t_1,c_12
-	bcs,a	%xcc,.+8
-	add	c_3,t_2,c_3
-	lduw	ap(6),a_6
-	mulx	a_2,a_3,t_1	!sqr_add_c2(a,3,2,c3,c1,c2);
-	addcc	c_12,t_1,c_12
-	bcs,a	%xcc,.+8
-	add	c_3,t_2,c_3
-	addcc	c_12,t_1,t_1
-	bcs,a	%xcc,.+8
-	add	c_3,t_2,c_3
-	srlx	t_1,32,c_12
-	stuw	t_1,rp(5)	!r[5]=c3;
-	or	c_12,c_3,c_12
-
-	mulx	a_6,a_0,t_1	!sqr_add_c2(a,6,0,c1,c2,c3);
-	addcc	c_12,t_1,c_12
-	clr	c_3
-	bcs,a	%xcc,.+8
-	add	c_3,t_2,c_3
-	addcc	c_12,t_1,c_12
-	bcs,a	%xcc,.+8
-	add	c_3,t_2,c_3
-	mulx	a_5,a_1,t_1	!sqr_add_c2(a,5,1,c1,c2,c3);
-	addcc	c_12,t_1,c_12
-	bcs,a	%xcc,.+8
-	add	c_3,t_2,c_3
-	addcc	c_12,t_1,c_12
-	bcs,a	%xcc,.+8
-	add	c_3,t_2,c_3
-	mulx	a_4,a_2,t_1	!sqr_add_c2(a,4,2,c1,c2,c3);
-	addcc	c_12,t_1,c_12
-	bcs,a	%xcc,.+8
-	add	c_3,t_2,c_3
-	addcc	c_12,t_1,c_12
-	bcs,a	%xcc,.+8
-	add	c_3,t_2,c_3
-	lduw	ap(7),a_7
-	mulx	a_3,a_3,t_1	!=!sqr_add_c(a,3,c1,c2,c3);
-	addcc	c_12,t_1,t_1
-	bcs,a	%xcc,.+8
-	add	c_3,t_2,c_3
-	srlx	t_1,32,c_12
-	stuw	t_1,rp(6)	!r[6]=c1;
-	or	c_12,c_3,c_12
-
-	mulx	a_0,a_7,t_1	!sqr_add_c2(a,7,0,c2,c3,c1);
-	addcc	c_12,t_1,c_12
-	clr	c_3
-	bcs,a	%xcc,.+8
-	add	c_3,t_2,c_3
-	addcc	c_12,t_1,c_12
-	bcs,a	%xcc,.+8
-	add	c_3,t_2,c_3
-	mulx	a_1,a_6,t_1	!sqr_add_c2(a,6,1,c2,c3,c1);
-	addcc	c_12,t_1,c_12
-	bcs,a	%xcc,.+8
-	add	c_3,t_2,c_3
-	addcc	c_12,t_1,c_12
-	bcs,a	%xcc,.+8
-	add	c_3,t_2,c_3
-	mulx	a_2,a_5,t_1	!sqr_add_c2(a,5,2,c2,c3,c1);
-	addcc	c_12,t_1,c_12
-	bcs,a	%xcc,.+8
-	add	c_3,t_2,c_3
-	addcc	c_12,t_1,c_12
-	bcs,a	%xcc,.+8
-	add	c_3,t_2,c_3
-	mulx	a_3,a_4,t_1	!sqr_add_c2(a,4,3,c2,c3,c1);
-	addcc	c_12,t_1,c_12
-	bcs,a	%xcc,.+8
-	add	c_3,t_2,c_3
-	addcc	c_12,t_1,t_1
-	bcs,a	%xcc,.+8
-	add	c_3,t_2,c_3
-	srlx	t_1,32,c_12
-	stuw	t_1,rp(7)	!r[7]=c2;
-	or	c_12,c_3,c_12
-
-	mulx	a_7,a_1,t_1	!sqr_add_c2(a,7,1,c3,c1,c2);
-	addcc	c_12,t_1,c_12
-	clr	c_3
-	bcs,a	%xcc,.+8
-	add	c_3,t_2,c_3
-	addcc	c_12,t_1,c_12
-	bcs,a	%xcc,.+8
-	add	c_3,t_2,c_3
-	mulx	a_6,a_2,t_1	!sqr_add_c2(a,6,2,c3,c1,c2);
-	addcc	c_12,t_1,c_12
-	bcs,a	%xcc,.+8
-	add	c_3,t_2,c_3
-	addcc	c_12,t_1,c_12
-	bcs,a	%xcc,.+8
-	add	c_3,t_2,c_3
-	mulx	a_5,a_3,t_1	!sqr_add_c2(a,5,3,c3,c1,c2);
-	addcc	c_12,t_1,c_12
-	bcs,a	%xcc,.+8
-	add	c_3,t_2,c_3
-	addcc	c_12,t_1,c_12
-	bcs,a	%xcc,.+8
-	add	c_3,t_2,c_3
-	mulx	a_4,a_4,t_1	!sqr_add_c(a,4,c3,c1,c2);
-	addcc	c_12,t_1,t_1
-	bcs,a	%xcc,.+8
-	add	c_3,t_2,c_3
-	srlx	t_1,32,c_12
-	stuw	t_1,rp(8)	!r[8]=c3;
-	or	c_12,c_3,c_12
-
-	mulx	a_2,a_7,t_1	!sqr_add_c2(a,7,2,c1,c2,c3);
-	addcc	c_12,t_1,c_12
-	clr	c_3
-	bcs,a	%xcc,.+8
-	add	c_3,t_2,c_3
-	addcc	c_12,t_1,c_12
-	bcs,a	%xcc,.+8
-	add	c_3,t_2,c_3
-	mulx	a_3,a_6,t_1	!sqr_add_c2(a,6,3,c1,c2,c3);
-	addcc	c_12,t_1,c_12
-	bcs,a	%xcc,.+8
-	add	c_3,t_2,c_3
-	addcc	c_12,t_1,c_12
-	bcs,a	%xcc,.+8
-	add	c_3,t_2,c_3
-	mulx	a_4,a_5,t_1	!sqr_add_c2(a,5,4,c1,c2,c3);
-	addcc	c_12,t_1,c_12
-	bcs,a	%xcc,.+8
-	add	c_3,t_2,c_3
-	addcc	c_12,t_1,t_1
-	bcs,a	%xcc,.+8
-	add	c_3,t_2,c_3
-	srlx	t_1,32,c_12
-	stuw	t_1,rp(9)	!r[9]=c1;
-	or	c_12,c_3,c_12
-
-	mulx	a_7,a_3,t_1	!sqr_add_c2(a,7,3,c2,c3,c1);
-	addcc	c_12,t_1,c_12
-	clr	c_3
-	bcs,a	%xcc,.+8
-	add	c_3,t_2,c_3
-	addcc	c_12,t_1,c_12
-	bcs,a	%xcc,.+8
-	add	c_3,t_2,c_3
-	mulx	a_6,a_4,t_1	!sqr_add_c2(a,6,4,c2,c3,c1);
-	addcc	c_12,t_1,c_12
-	bcs,a	%xcc,.+8
-	add	c_3,t_2,c_3
-	addcc	c_12,t_1,c_12
-	bcs,a	%xcc,.+8
-	add	c_3,t_2,c_3
-	mulx	a_5,a_5,t_1	!sqr_add_c(a,5,c2,c3,c1);
-	addcc	c_12,t_1,t_1
-	bcs,a	%xcc,.+8
-	add	c_3,t_2,c_3
-	srlx	t_1,32,c_12
-	stuw	t_1,rp(10)	!r[10]=c2;
-	or	c_12,c_3,c_12
-
-	mulx	a_4,a_7,t_1	!sqr_add_c2(a,7,4,c3,c1,c2);
-	addcc	c_12,t_1,c_12
-	clr	c_3
-	bcs,a	%xcc,.+8
-	add	c_3,t_2,c_3
-	addcc	c_12,t_1,c_12
-	bcs,a	%xcc,.+8
-	add	c_3,t_2,c_3
-	mulx	a_5,a_6,t_1	!sqr_add_c2(a,6,5,c3,c1,c2);
-	addcc	c_12,t_1,c_12
-	bcs,a	%xcc,.+8
-	add	c_3,t_2,c_3
-	addcc	c_12,t_1,t_1
-	bcs,a	%xcc,.+8
-	add	c_3,t_2,c_3
-	srlx	t_1,32,c_12
-	stuw	t_1,rp(11)	!r[11]=c3;
-	or	c_12,c_3,c_12
-
-	mulx	a_7,a_5,t_1	!sqr_add_c2(a,7,5,c1,c2,c3);
-	addcc	c_12,t_1,c_12
-	clr	c_3
-	bcs,a	%xcc,.+8
-	add	c_3,t_2,c_3
-	addcc	c_12,t_1,c_12
-	bcs,a	%xcc,.+8
-	add	c_3,t_2,c_3
-	mulx	a_6,a_6,t_1	!sqr_add_c(a,6,c1,c2,c3);
-	addcc	c_12,t_1,t_1
-	bcs,a	%xcc,.+8
-	add	c_3,t_2,c_3
-	srlx	t_1,32,c_12
-	stuw	t_1,rp(12)	!r[12]=c1;
-	or	c_12,c_3,c_12
-
-	mulx	a_6,a_7,t_1	!sqr_add_c2(a,7,6,c2,c3,c1);
-	addcc	c_12,t_1,c_12
-	clr	c_3
-	bcs,a	%xcc,.+8
-	add	c_3,t_2,c_3
-	addcc	c_12,t_1,t_1
-	bcs,a	%xcc,.+8
-	add	c_3,t_2,c_3
-	srlx	t_1,32,c_12
-	stuw	t_1,rp(13)	!r[13]=c2;
-	or	c_12,c_3,c_12
-
-	mulx	a_7,a_7,t_1	!sqr_add_c(a,7,c3,c1,c2);
-	addcc	c_12,t_1,t_1
-	srlx	t_1,32,c_12
-	stuw	t_1,rp(14)	!r[14]=c3;
-	stuw	c_12,rp(15)	!r[15]=c1;
-
-	ret
-	restore	%g0,%g0,%o0
-
-.type	bn_sqr_comba8,#function
-.size	bn_sqr_comba8,(.-bn_sqr_comba8)
-
-.align	32
-
-.global bn_sqr_comba4
-/*
- * void bn_sqr_comba4(r,a)
- * BN_ULONG *r,*a;
- */
-bn_sqr_comba4:
-	save	%sp,FRAME_SIZE,%sp
-	mov	1,t_2
-	lduw	ap(0),a_0
-	sllx	t_2,32,t_2
-	lduw	ap(1),a_1
-	mulx	a_0,a_0,t_1	!sqr_add_c(a,0,c1,c2,c3);
-	srlx	t_1,32,c_12
-	stuw	t_1,rp(0)	!r[0]=c1;
-
-	lduw	ap(2),a_2
-	mulx	a_0,a_1,t_1	!sqr_add_c2(a,1,0,c2,c3,c1);
-	addcc	c_12,t_1,c_12
-	clr	c_3
-	bcs,a	%xcc,.+8
-	add	c_3,t_2,c_3
-	addcc	c_12,t_1,t_1
-	bcs,a	%xcc,.+8
-	add	c_3,t_2,c_3
-	srlx	t_1,32,c_12
-	stuw	t_1,rp(1)	!r[1]=c2;
-	or	c_12,c_3,c_12
-
-	mulx	a_2,a_0,t_1	!sqr_add_c2(a,2,0,c3,c1,c2);
-	addcc	c_12,t_1,c_12
-	clr	c_3
-	bcs,a	%xcc,.+8
-	add	c_3,t_2,c_3
-	addcc	c_12,t_1,c_12
-	bcs,a	%xcc,.+8
-	add	c_3,t_2,c_3
-	lduw	ap(3),a_3
-	mulx	a_1,a_1,t_1	!sqr_add_c(a,1,c3,c1,c2);
-	addcc	c_12,t_1,t_1
-	bcs,a	%xcc,.+8
-	add	c_3,t_2,c_3
-	srlx	t_1,32,c_12
-	stuw	t_1,rp(2)	!r[2]=c3;
-	or	c_12,c_3,c_12
-
-	mulx	a_0,a_3,t_1	!sqr_add_c2(a,3,0,c1,c2,c3);
-	addcc	c_12,t_1,c_12
-	clr	c_3
-	bcs,a	%xcc,.+8
-	add	c_3,t_2,c_3
-	addcc	c_12,t_1,c_12
-	bcs,a	%xcc,.+8
-	add	c_3,t_2,c_3
-	mulx	a_1,a_2,t_1	!sqr_add_c2(a,2,1,c1,c2,c3);
-	addcc	c_12,t_1,c_12
-	bcs,a	%xcc,.+8
-	add	c_3,t_2,c_3
-	addcc	c_12,t_1,t_1
-	bcs,a	%xcc,.+8
-	add	c_3,t_2,c_3
-	srlx	t_1,32,c_12
-	stuw	t_1,rp(3)	!r[3]=c1;
-	or	c_12,c_3,c_12
-
-	mulx	a_3,a_1,t_1	!sqr_add_c2(a,3,1,c2,c3,c1);
-	addcc	c_12,t_1,c_12
-	clr	c_3
-	bcs,a	%xcc,.+8
-	add	c_3,t_2,c_3
-	addcc	c_12,t_1,c_12
-	bcs,a	%xcc,.+8
-	add	c_3,t_2,c_3
-	mulx	a_2,a_2,t_1	!sqr_add_c(a,2,c2,c3,c1);
-	addcc	c_12,t_1,t_1
-	bcs,a	%xcc,.+8
-	add	c_3,t_2,c_3
-	srlx	t_1,32,c_12
-	stuw	t_1,rp(4)	!r[4]=c2;
-	or	c_12,c_3,c_12
-
-	mulx	a_2,a_3,t_1	!sqr_add_c2(a,3,2,c3,c1,c2);
-	addcc	c_12,t_1,c_12
-	clr	c_3
-	bcs,a	%xcc,.+8
-	add	c_3,t_2,c_3
-	addcc	c_12,t_1,t_1
-	bcs,a	%xcc,.+8
-	add	c_3,t_2,c_3
-	srlx	t_1,32,c_12
-	stuw	t_1,rp(5)	!r[5]=c3;
-	or	c_12,c_3,c_12
-
-	mulx	a_3,a_3,t_1	!sqr_add_c(a,3,c1,c2,c3);
-	addcc	c_12,t_1,t_1
-	srlx	t_1,32,c_12
-	stuw	t_1,rp(6)	!r[6]=c1;
-	stuw	c_12,rp(7)	!r[7]=c2;
-	
-	ret
-	restore	%g0,%g0,%o0
-
-.type	bn_sqr_comba4,#function
-.size	bn_sqr_comba4,(.-bn_sqr_comba4)
-
-.align	32
diff --git a/crypto/openssl/crypto/bn/asm/x86.pl b/crypto/openssl/crypto/bn/asm/x86.pl
deleted file mode 100644
index 1bc4f1bb2747..000000000000
--- a/crypto/openssl/crypto/bn/asm/x86.pl
+++ /dev/null
@@ -1,28 +0,0 @@
-#!/usr/local/bin/perl
-
-push(@INC,"perlasm","../../perlasm");
-require "x86asm.pl";
-
-require("x86/mul_add.pl");
-require("x86/mul.pl");
-require("x86/sqr.pl");
-require("x86/div.pl");
-require("x86/add.pl");
-require("x86/sub.pl");
-require("x86/comba.pl");
-
-&asm_init($ARGV[0],$0);
-
-&bn_mul_add_words("bn_mul_add_words");
-&bn_mul_words("bn_mul_words");
-&bn_sqr_words("bn_sqr_words");
-&bn_div_words("bn_div_words");
-&bn_add_words("bn_add_words");
-&bn_sub_words("bn_sub_words");
-&bn_mul_comba("bn_mul_comba8",8);
-&bn_mul_comba("bn_mul_comba4",4);
-&bn_sqr_comba("bn_sqr_comba8",8);
-&bn_sqr_comba("bn_sqr_comba4",4);
-
-&asm_finish();
-
diff --git a/crypto/openssl/crypto/bn/asm/x86/add.pl b/crypto/openssl/crypto/bn/asm/x86/add.pl
deleted file mode 100644
index 0b5cf583e37f..000000000000
--- a/crypto/openssl/crypto/bn/asm/x86/add.pl
+++ /dev/null
@@ -1,76 +0,0 @@
-#!/usr/local/bin/perl
-# x86 assember
-
-sub bn_add_words
-	{
-	local($name)=@_;
-
-	&function_begin($name,"");
-
-	&comment("");
-	$a="esi";
-	$b="edi";
-	$c="eax";
-	$r="ebx";
-	$tmp1="ecx";
-	$tmp2="edx";
-	$num="ebp";
-
-	&mov($r,&wparam(0));	# get r
-	 &mov($a,&wparam(1));	# get a
-	&mov($b,&wparam(2));	# get b
-	 &mov($num,&wparam(3));	# get num
-	&xor($c,$c);		# clear carry
-	 &and($num,0xfffffff8);	# num / 8
-
-	&jz(&label("aw_finish"));
-
-	&set_label("aw_loop",0);
-	for ($i=0; $i<8; $i++)
-		{
-		&comment("Round $i");
-
-		&mov($tmp1,&DWP($i*4,$a,"",0)); 	# *a
-		 &mov($tmp2,&DWP($i*4,$b,"",0)); 	# *b
-		&add($tmp1,$c);
-		 &mov($c,0);
-		&adc($c,$c);
-		 &add($tmp1,$tmp2);
-		&adc($c,0);
-		 &mov(&DWP($i*4,$r,"",0),$tmp1); 	# *r
-		}
-
-	&comment("");
-	&add($a,32);
-	 &add($b,32);
-	&add($r,32);
-	 &sub($num,8);
-	&jnz(&label("aw_loop"));
-
-	&set_label("aw_finish",0);
-	&mov($num,&wparam(3));	# get num
-	&and($num,7);
-	 &jz(&label("aw_end"));
-
-	for ($i=0; $i<7; $i++)
-		{
-		&comment("Tail Round $i");
-		&mov($tmp1,&DWP($i*4,$a,"",0));	# *a
-		 &mov($tmp2,&DWP($i*4,$b,"",0));# *b
-		&add($tmp1,$c);
-		 &mov($c,0);
-		&adc($c,$c);
-		 &add($tmp1,$tmp2);
-		&adc($c,0);
-		 &dec($num) if ($i != 6);
-		&mov(&DWP($i*4,$r,"",0),$tmp1);	# *a
-		 &jz(&label("aw_end")) if ($i != 6);
-		}
-	&set_label("aw_end",0);
-
-#	&mov("eax",$c);		# $c is "eax"
-
-	&function_end($name);
-	}
-
-1;
diff --git a/crypto/openssl/crypto/bn/asm/x86/comba.pl b/crypto/openssl/crypto/bn/asm/x86/comba.pl
deleted file mode 100644
index 22912536293d..000000000000
--- a/crypto/openssl/crypto/bn/asm/x86/comba.pl
+++ /dev/null
@@ -1,277 +0,0 @@
-#!/usr/local/bin/perl
-# x86 assember
-
-sub mul_add_c
-	{
-	local($a,$ai,$b,$bi,$c0,$c1,$c2,$pos,$i,$na,$nb)=@_;
-
-	# pos == -1 if eax and edx are pre-loaded, 0 to load from next
-	# words, and 1 if load return value
-
-	&comment("mul a[$ai]*b[$bi]");
-
-	# "eax" and "edx" will always be pre-loaded.
-	# &mov("eax",&DWP($ai*4,$a,"",0)) ;
-	# &mov("edx",&DWP($bi*4,$b,"",0));
-
-	&mul("edx");
-	&add($c0,"eax");
-	 &mov("eax",&DWP(($na)*4,$a,"",0)) if $pos == 0;	# laod next a
-	 &mov("eax",&wparam(0)) if $pos > 0;			# load r[]
-	 ###
-	&adc($c1,"edx");
-	 &mov("edx",&DWP(($nb)*4,$b,"",0)) if $pos == 0;	# laod next b
-	 &mov("edx",&DWP(($nb)*4,$b,"",0)) if $pos == 1;	# laod next b
-	 ###
-	&adc($c2,0);
-	 # is pos > 1, it means it is the last loop 
-	 &mov(&DWP($i*4,"eax","",0),$c0) if $pos > 0;		# save r[];
-	&mov("eax",&DWP(($na)*4,$a,"",0)) if $pos == 1;		# laod next a
-	}
-
-sub sqr_add_c
-	{
-	local($r,$a,$ai,$bi,$c0,$c1,$c2,$pos,$i,$na,$nb)=@_;
-
-	# pos == -1 if eax and edx are pre-loaded, 0 to load from next
-	# words, and 1 if load return value
-
-	&comment("sqr a[$ai]*a[$bi]");
-
-	# "eax" and "edx" will always be pre-loaded.
-	# &mov("eax",&DWP($ai*4,$a,"",0)) ;
-	# &mov("edx",&DWP($bi*4,$b,"",0));
-
-	if ($ai == $bi)
-		{ &mul("eax");}
-	else
-		{ &mul("edx");}
-	&add($c0,"eax");
-	 &mov("eax",&DWP(($na)*4,$a,"",0)) if $pos == 0;	# load next a
-	 ###
-	&adc($c1,"edx");
-	 &mov("edx",&DWP(($nb)*4,$a,"",0)) if ($pos == 1) && ($na != $nb);
-	 ###
-	&adc($c2,0);
-	 # is pos > 1, it means it is the last loop 
-	 &mov(&DWP($i*4,$r,"",0),$c0) if $pos > 0;		# save r[];
-	&mov("eax",&DWP(($na)*4,$a,"",0)) if $pos == 1;		# load next b
-	}
-
-sub sqr_add_c2
-	{
-	local($r,$a,$ai,$bi,$c0,$c1,$c2,$pos,$i,$na,$nb)=@_;
-
-	# pos == -1 if eax and edx are pre-loaded, 0 to load from next
-	# words, and 1 if load return value
-
-	&comment("sqr a[$ai]*a[$bi]");
-
-	# "eax" and "edx" will always be pre-loaded.
-	# &mov("eax",&DWP($ai*4,$a,"",0)) ;
-	# &mov("edx",&DWP($bi*4,$a,"",0));
-
-	if ($ai == $bi)
-		{ &mul("eax");}
-	else
-		{ &mul("edx");}
-	&add("eax","eax");
-	 ###
-	&adc("edx","edx");
-	 ###
-	&adc($c2,0);
-	 &add($c0,"eax");
-	&adc($c1,"edx");
-	 &mov("eax",&DWP(($na)*4,$a,"",0)) if $pos == 0;	# load next a
-	 &mov("eax",&DWP(($na)*4,$a,"",0)) if $pos == 1;	# load next b
-	&adc($c2,0);
-	&mov(&DWP($i*4,$r,"",0),$c0) if $pos > 0;		# save r[];
-	 &mov("edx",&DWP(($nb)*4,$a,"",0)) if ($pos <= 1) && ($na != $nb);
-	 ###
-	}
-
-sub bn_mul_comba
-	{
-	local($name,$num)=@_;
-	local($a,$b,$c0,$c1,$c2);
-	local($i,$as,$ae,$bs,$be,$ai,$bi);
-	local($tot,$end);
-
-	&function_begin_B($name,"");
-
-	$c0="ebx";
-	$c1="ecx";
-	$c2="ebp";
-	$a="esi";
-	$b="edi";
-	
-	$as=0;
-	$ae=0;
-	$bs=0;
-	$be=0;
-	$tot=$num+$num-1;
-
-	&push("esi");
-	 &mov($a,&wparam(1));
-	&push("edi");
-	 &mov($b,&wparam(2));
-	&push("ebp");
-	 &push("ebx");
-
-	&xor($c0,$c0);
-	 &mov("eax",&DWP(0,$a,"",0));	# load the first word 
-	&xor($c1,$c1);
-	 &mov("edx",&DWP(0,$b,"",0));	# load the first second 
-
-	for ($i=0; $i<$tot; $i++)
-		{
-		$ai=$as;
-		$bi=$bs;
-		$end=$be+1;
-
-		&comment("################## Calculate word $i"); 
-
-		for ($j=$bs; $j<$end; $j++)
-			{
-			&xor($c2,$c2) if ($j == $bs);
-			if (($j+1) == $end)
-				{
-				$v=1;
-				$v=2 if (($i+1) == $tot);
-				}
-			else
-				{ $v=0; }
-			if (($j+1) != $end)
-				{
-				$na=($ai-1);
-				$nb=($bi+1);
-				}
-			else
-				{
-				$na=$as+($i < ($num-1));
-				$nb=$bs+($i >= ($num-1));
-				}
-#printf STDERR "[$ai,$bi] -> [$na,$nb]\n";
-			&mul_add_c($a,$ai,$b,$bi,$c0,$c1,$c2,$v,$i,$na,$nb);
-			if ($v)
-				{
-				&comment("saved r[$i]");
-				# &mov("eax",&wparam(0));
-				# &mov(&DWP($i*4,"eax","",0),$c0);
-				($c0,$c1,$c2)=($c1,$c2,$c0);
-				}
-			$ai--;
-			$bi++;
-			}
-		$as++ if ($i < ($num-1));
-		$ae++ if ($i >= ($num-1));
-
-		$bs++ if ($i >= ($num-1));
-		$be++ if ($i < ($num-1));
-		}
-	&comment("save r[$i]");
-	# &mov("eax",&wparam(0));
-	&mov(&DWP($i*4,"eax","",0),$c0);
-
-	&pop("ebx");
-	&pop("ebp");
-	&pop("edi");
-	&pop("esi");
-	&ret();
-	&function_end_B($name);
-	}
-
-sub bn_sqr_comba
-	{
-	local($name,$num)=@_;
-	local($r,$a,$c0,$c1,$c2)=@_;
-	local($i,$as,$ae,$bs,$be,$ai,$bi);
-	local($b,$tot,$end,$half);
-
-	&function_begin_B($name,"");
-
-	$c0="ebx";
-	$c1="ecx";
-	$c2="ebp";
-	$a="esi";
-	$r="edi";
-
-	&push("esi");
-	 &push("edi");
-	&push("ebp");
-	 &push("ebx");
-	&mov($r,&wparam(0));
-	 &mov($a,&wparam(1));
-	&xor($c0,$c0);
-	 &xor($c1,$c1);
-	&mov("eax",&DWP(0,$a,"",0)); # load the first word
-
-	$as=0;
-	$ae=0;
-	$bs=0;
-	$be=0;
-	$tot=$num+$num-1;
-
-	for ($i=0; $i<$tot; $i++)
-		{
-		$ai=$as;
-		$bi=$bs;
-		$end=$be+1;
-
-		&comment("############### Calculate word $i");
-		for ($j=$bs; $j<$end; $j++)
-			{
-			&xor($c2,$c2) if ($j == $bs);
-			if (($ai-1) < ($bi+1))
-				{
-				$v=1;
-				$v=2 if ($i+1) == $tot;
-				}
-			else
-				{ $v=0; }
-			if (!$v)
-				{
-				$na=$ai-1;
-				$nb=$bi+1;
-				}
-			else
-				{
-				$na=$as+($i < ($num-1));
-				$nb=$bs+($i >= ($num-1));
-				}
-			if ($ai == $bi)
-				{
-				&sqr_add_c($r,$a,$ai,$bi,
-					$c0,$c1,$c2,$v,$i,$na,$nb);
-				}
-			else
-				{
-				&sqr_add_c2($r,$a,$ai,$bi,
-					$c0,$c1,$c2,$v,$i,$na,$nb);
-				}
-			if ($v)
-				{
-				&comment("saved r[$i]");
-				#&mov(&DWP($i*4,$r,"",0),$c0);
-				($c0,$c1,$c2)=($c1,$c2,$c0);
-				last;
-				}
-			$ai--;
-			$bi++;
-			}
-		$as++ if ($i < ($num-1));
-		$ae++ if ($i >= ($num-1));
-
-		$bs++ if ($i >= ($num-1));
-		$be++ if ($i < ($num-1));
-		}
-	&mov(&DWP($i*4,$r,"",0),$c0);
-	&pop("ebx");
-	&pop("ebp");
-	&pop("edi");
-	&pop("esi");
-	&ret();
-	&function_end_B($name);
-	}
-
-1;
diff --git a/crypto/openssl/crypto/bn/asm/x86/div.pl b/crypto/openssl/crypto/bn/asm/x86/div.pl
deleted file mode 100644
index 0e90152caa95..000000000000
--- a/crypto/openssl/crypto/bn/asm/x86/div.pl
+++ /dev/null
@@ -1,15 +0,0 @@
-#!/usr/local/bin/perl
-# x86 assember
-
-sub bn_div_words
-	{
-	local($name)=@_;
-
-	&function_begin($name,"");
-	&mov("edx",&wparam(0));	#
-	&mov("eax",&wparam(1));	#
-	&mov("ebx",&wparam(2));	#
-	&div("ebx");
-	&function_end($name);
-	}
-1;
diff --git a/crypto/openssl/crypto/bn/asm/x86/f b/crypto/openssl/crypto/bn/asm/x86/f
deleted file mode 100644
index 22e411222431..000000000000
--- a/crypto/openssl/crypto/bn/asm/x86/f
+++ /dev/null
@@ -1,3 +0,0 @@
-#!/usr/local/bin/perl
-# x86 assember
-
diff --git a/crypto/openssl/crypto/bn/asm/x86/mul.pl b/crypto/openssl/crypto/bn/asm/x86/mul.pl
deleted file mode 100644
index 674cb9b05512..000000000000
--- a/crypto/openssl/crypto/bn/asm/x86/mul.pl
+++ /dev/null
@@ -1,77 +0,0 @@
-#!/usr/local/bin/perl
-# x86 assember
-
-sub bn_mul_words
-	{
-	local($name)=@_;
-
-	&function_begin($name,"");
-
-	&comment("");
-	$Low="eax";
-	$High="edx";
-	$a="ebx";
-	$w="ecx";
-	$r="edi";
-	$c="esi";
-	$num="ebp";
-
-	&xor($c,$c);		# clear carry
-	&mov($r,&wparam(0));	#
-	&mov($a,&wparam(1));	#
-	&mov($num,&wparam(2));	#
-	&mov($w,&wparam(3));	#
-
-	&and($num,0xfffffff8);	# num / 8
-	&jz(&label("mw_finish"));
-
-	&set_label("mw_loop",0);
-	for ($i=0; $i<32; $i+=4)
-		{
-		&comment("Round $i");
-
-		 &mov("eax",&DWP($i,$a,"",0)); 	# *a
-		&mul($w);			# *a * w
-		&add("eax",$c);			# L(t)+=c
-		 # XXX
-
-		&adc("edx",0);			# H(t)+=carry
-		 &mov(&DWP($i,$r,"",0),"eax");	# *r= L(t);
-
-		&mov($c,"edx");			# c=  H(t);
-		}
-
-	&comment("");
-	&add($a,32);
-	&add($r,32);
-	&sub($num,8);
-	&jz(&label("mw_finish"));
-	&jmp(&label("mw_loop"));
-
-	&set_label("mw_finish",0);
-	&mov($num,&wparam(2));	# get num
-	&and($num,7);
-	&jnz(&label("mw_finish2"));
-	&jmp(&label("mw_end"));
-
-	&set_label("mw_finish2",1);
-	for ($i=0; $i<7; $i++)
-		{
-		&comment("Tail Round $i");
-		 &mov("eax",&DWP($i*4,$a,"",0));# *a
-		&mul($w);			# *a * w
-		&add("eax",$c);			# L(t)+=c
-		 # XXX
-		&adc("edx",0);			# H(t)+=carry
-		 &mov(&DWP($i*4,$r,"",0),"eax");# *r= L(t);
-		&mov($c,"edx");			# c=  H(t);
-		 &dec($num) if ($i != 7-1);
-		&jz(&label("mw_end")) if ($i != 7-1);
-		}
-	&set_label("mw_end",0);
-	&mov("eax",$c);
-
-	&function_end($name);
-	}
-
-1;
diff --git a/crypto/openssl/crypto/bn/asm/x86/mul_add.pl b/crypto/openssl/crypto/bn/asm/x86/mul_add.pl
deleted file mode 100644
index 61830d3a906a..000000000000
--- a/crypto/openssl/crypto/bn/asm/x86/mul_add.pl
+++ /dev/null
@@ -1,87 +0,0 @@
-#!/usr/local/bin/perl
-# x86 assember
-
-sub bn_mul_add_words
-	{
-	local($name)=@_;
-
-	&function_begin($name,"");
-
-	&comment("");
-	$Low="eax";
-	$High="edx";
-	$a="ebx";
-	$w="ebp";
-	$r="edi";
-	$c="esi";
-
-	&xor($c,$c);		# clear carry
-	&mov($r,&wparam(0));	#
-
-	&mov("ecx",&wparam(2));	#
-	&mov($a,&wparam(1));	#
-
-	&and("ecx",0xfffffff8);	# num / 8
-	&mov($w,&wparam(3));	#
-
-	&push("ecx");		# Up the stack for a tmp variable
-
-	&jz(&label("maw_finish"));
-
-	&set_label("maw_loop",0);
-
-	&mov(&swtmp(0),"ecx");	#
-
-	for ($i=0; $i<32; $i+=4)
-		{
-		&comment("Round $i");
-
-		 &mov("eax",&DWP($i,$a,"",0)); 	# *a
-		&mul($w);			# *a * w
-		&add("eax",$c);		# L(t)+= *r
-		 &mov($c,&DWP($i,$r,"",0));	# L(t)+= *r
-		&adc("edx",0);			# H(t)+=carry
-		 &add("eax",$c);		# L(t)+=c
-		&adc("edx",0);			# H(t)+=carry
-		 &mov(&DWP($i,$r,"",0),"eax");	# *r= L(t);
-		&mov($c,"edx");			# c=  H(t);
-		}
-
-	&comment("");
-	&mov("ecx",&swtmp(0));	#
-	&add($a,32);
-	&add($r,32);
-	&sub("ecx",8);
-	&jnz(&label("maw_loop"));
-
-	&set_label("maw_finish",0);
-	&mov("ecx",&wparam(2));	# get num
-	&and("ecx",7);
-	&jnz(&label("maw_finish2"));	# helps branch prediction
-	&jmp(&label("maw_end"));
-
-	&set_label("maw_finish2",1);
-	for ($i=0; $i<7; $i++)
-		{
-		&comment("Tail Round $i");
-		 &mov("eax",&DWP($i*4,$a,"",0));# *a
-		&mul($w);			# *a * w
-		&add("eax",$c);			# L(t)+=c
-		 &mov($c,&DWP($i*4,$r,"",0));	# L(t)+= *r
-		&adc("edx",0);			# H(t)+=carry
-		 &add("eax",$c);
-		&adc("edx",0);			# H(t)+=carry
-		 &dec("ecx") if ($i != 7-1);
-		&mov(&DWP($i*4,$r,"",0),"eax");	# *r= L(t);
-		 &mov($c,"edx");			# c=  H(t);
-		&jz(&label("maw_end")) if ($i != 7-1);
-		}
-	&set_label("maw_end",0);
-	&mov("eax",$c);
-
-	&pop("ecx");	# clear variable from
-
-	&function_end($name);
-	}
-
-1;
diff --git a/crypto/openssl/crypto/bn/asm/x86/sqr.pl b/crypto/openssl/crypto/bn/asm/x86/sqr.pl
deleted file mode 100644
index 1f90993cf689..000000000000
--- a/crypto/openssl/crypto/bn/asm/x86/sqr.pl
+++ /dev/null
@@ -1,60 +0,0 @@
-#!/usr/local/bin/perl
-# x86 assember
-
-sub bn_sqr_words
-	{
-	local($name)=@_;
-
-	&function_begin($name,"");
-
-	&comment("");
-	$r="esi";
-	$a="edi";
-	$num="ebx";
-
-	&mov($r,&wparam(0));	#
-	&mov($a,&wparam(1));	#
-	&mov($num,&wparam(2));	#
-
-	&and($num,0xfffffff8);	# num / 8
-	&jz(&label("sw_finish"));
-
-	&set_label("sw_loop",0);
-	for ($i=0; $i<32; $i+=4)
-		{
-		&comment("Round $i");
-		&mov("eax",&DWP($i,$a,"",0)); 	# *a
-		 # XXX
-		&mul("eax");			# *a * *a
-		&mov(&DWP($i*2,$r,"",0),"eax");	#
-		 &mov(&DWP($i*2+4,$r,"",0),"edx");#
-		}
-
-	&comment("");
-	&add($a,32);
-	&add($r,64);
-	&sub($num,8);
-	&jnz(&label("sw_loop"));
-
-	&set_label("sw_finish",0);
-	&mov($num,&wparam(2));	# get num
-	&and($num,7);
-	&jz(&label("sw_end"));
-
-	for ($i=0; $i<7; $i++)
-		{
-		&comment("Tail Round $i");
-		&mov("eax",&DWP($i*4,$a,"",0));	# *a
-		 # XXX
-		&mul("eax");			# *a * *a
-		&mov(&DWP($i*8,$r,"",0),"eax");	#
-		 &dec($num) if ($i != 7-1);
-		&mov(&DWP($i*8+4,$r,"",0),"edx");
-		 &jz(&label("sw_end")) if ($i != 7-1);
-		}
-	&set_label("sw_end",0);
-
-	&function_end($name);
-	}
-
-1;
diff --git a/crypto/openssl/crypto/bn/asm/x86/sub.pl b/crypto/openssl/crypto/bn/asm/x86/sub.pl
deleted file mode 100644
index 837b0e1b078d..000000000000
--- a/crypto/openssl/crypto/bn/asm/x86/sub.pl
+++ /dev/null
@@ -1,76 +0,0 @@
-#!/usr/local/bin/perl
-# x86 assember
-
-sub bn_sub_words
-	{
-	local($name)=@_;
-
-	&function_begin($name,"");
-
-	&comment("");
-	$a="esi";
-	$b="edi";
-	$c="eax";
-	$r="ebx";
-	$tmp1="ecx";
-	$tmp2="edx";
-	$num="ebp";
-
-	&mov($r,&wparam(0));	# get r
-	 &mov($a,&wparam(1));	# get a
-	&mov($b,&wparam(2));	# get b
-	 &mov($num,&wparam(3));	# get num
-	&xor($c,$c);		# clear carry
-	 &and($num,0xfffffff8);	# num / 8
-
-	&jz(&label("aw_finish"));
-
-	&set_label("aw_loop",0);
-	for ($i=0; $i<8; $i++)
-		{
-		&comment("Round $i");
-
-		&mov($tmp1,&DWP($i*4,$a,"",0)); 	# *a
-		 &mov($tmp2,&DWP($i*4,$b,"",0)); 	# *b
-		&sub($tmp1,$c);
-		 &mov($c,0);
-		&adc($c,$c);
-		 &sub($tmp1,$tmp2);
-		&adc($c,0);
-		 &mov(&DWP($i*4,$r,"",0),$tmp1); 	# *r
-		}
-
-	&comment("");
-	&add($a,32);
-	 &add($b,32);
-	&add($r,32);
-	 &sub($num,8);
-	&jnz(&label("aw_loop"));
-
-	&set_label("aw_finish",0);
-	&mov($num,&wparam(3));	# get num
-	&and($num,7);
-	 &jz(&label("aw_end"));
-
-	for ($i=0; $i<7; $i++)
-		{
-		&comment("Tail Round $i");
-		&mov($tmp1,&DWP($i*4,$a,"",0));	# *a
-		 &mov($tmp2,&DWP($i*4,$b,"",0));# *b
-		&sub($tmp1,$c);
-		 &mov($c,0);
-		&adc($c,$c);
-		 &sub($tmp1,$tmp2);
-		&adc($c,0);
-		 &dec($num) if ($i != 6);
-		&mov(&DWP($i*4,$r,"",0),$tmp1);	# *a
-		 &jz(&label("aw_end")) if ($i != 6);
-		}
-	&set_label("aw_end",0);
-
-#	&mov("eax",$c);		# $c is "eax"
-
-	&function_end($name);
-	}
-
-1;
diff --git a/crypto/openssl/crypto/bn/asm/x86_64-gcc.c b/crypto/openssl/crypto/bn/asm/x86_64-gcc.c
deleted file mode 100644
index f13f52dd853e..000000000000
--- a/crypto/openssl/crypto/bn/asm/x86_64-gcc.c
+++ /dev/null
@@ -1,597 +0,0 @@
-#ifdef __SUNPRO_C
-# include "../bn_asm.c"	/* kind of dirty hack for Sun Studio */
-#else
-/*
- * x86_64 BIGNUM accelerator version 0.1, December 2002.
- *
- * Implemented by Andy Polyakov <appro@fy.chalmers.se> for the OpenSSL
- * project.
- *
- * Rights for redistribution and usage in source and binary forms are
- * granted according to the OpenSSL license. Warranty of any kind is
- * disclaimed.
- *
- * Q. Version 0.1? It doesn't sound like Andy, he used to assign real
- *    versions, like 1.0...
- * A. Well, that's because this code is basically a quick-n-dirty
- *    proof-of-concept hack. As you can see it's implemented with
- *    inline assembler, which means that you're bound to GCC and that
- *    there might be enough room for further improvement.
- *
- * Q. Why inline assembler?
- * A. x86_64 features own ABI which I'm not familiar with. This is
- *    why I decided to let the compiler take care of subroutine
- *    prologue/epilogue as well as register allocation. For reference.
- *    Win64 implements different ABI for AMD64, different from Linux.
- *
- * Q. How much faster does it get?
- * A. 'apps/openssl speed rsa dsa' output with no-asm:
- *
- *	                  sign    verify    sign/s verify/s
- *	rsa  512 bits   0.0006s   0.0001s   1683.8  18456.2
- *	rsa 1024 bits   0.0028s   0.0002s    356.0   6407.0
- *	rsa 2048 bits   0.0172s   0.0005s     58.0   1957.8
- *	rsa 4096 bits   0.1155s   0.0018s      8.7    555.6
- *	                  sign    verify    sign/s verify/s
- *	dsa  512 bits   0.0005s   0.0006s   2100.8   1768.3
- *	dsa 1024 bits   0.0014s   0.0018s    692.3    559.2
- *	dsa 2048 bits   0.0049s   0.0061s    204.7    165.0
- *
- *    'apps/openssl speed rsa dsa' output with this module:
- *
- *	                  sign    verify    sign/s verify/s
- *	rsa  512 bits   0.0004s   0.0000s   2767.1  33297.9
- *	rsa 1024 bits   0.0012s   0.0001s    867.4  14674.7
- *	rsa 2048 bits   0.0061s   0.0002s    164.0   5270.0
- *	rsa 4096 bits   0.0384s   0.0006s     26.1   1650.8
- *	                  sign    verify    sign/s verify/s
- *	dsa  512 bits   0.0002s   0.0003s   4442.2   3786.3
- *	dsa 1024 bits   0.0005s   0.0007s   1835.1   1497.4
- *	dsa 2048 bits   0.0016s   0.0020s    620.4    504.6
- *
- *    For the reference. IA-32 assembler implementation performs
- *    very much like 64-bit code compiled with no-asm on the same
- *    machine.
- */
-
-#define BN_ULONG unsigned long
-
-/*
- * "m"(a), "+m"(r)	is the way to favor DirectPath µ-code;
- * "g"(0)		let the compiler to decide where does it
- *			want to keep the value of zero;
- */
-#define mul_add(r,a,word,carry) do {	\
-	register BN_ULONG high,low;	\
-	asm ("mulq %3"			\
-		: "=a"(low),"=d"(high)	\
-		: "a"(word),"m"(a)	\
-		: "cc");		\
-	asm ("addq %2,%0; adcq %3,%1"	\
-		: "+r"(carry),"+d"(high)\
-		: "a"(low),"g"(0)	\
-		: "cc");		\
-	asm ("addq %2,%0; adcq %3,%1"	\
-		: "+m"(r),"+d"(high)	\
-		: "r"(carry),"g"(0)	\
-		: "cc");		\
-	carry=high;			\
-	} while (0)
-
-#define mul(r,a,word,carry) do {	\
-	register BN_ULONG high,low;	\
-	asm ("mulq %3"			\
-		: "=a"(low),"=d"(high)	\
-		: "a"(word),"g"(a)	\
-		: "cc");		\
-	asm ("addq %2,%0; adcq %3,%1"	\
-		: "+r"(carry),"+d"(high)\
-		: "a"(low),"g"(0)	\
-		: "cc");		\
-	(r)=carry, carry=high;		\
-	} while (0)
-
-#define sqr(r0,r1,a)			\
-	asm ("mulq %2"			\
-		: "=a"(r0),"=d"(r1)	\
-		: "a"(a)		\
-		: "cc");
-
-BN_ULONG bn_mul_add_words(BN_ULONG *rp, BN_ULONG *ap, int num, BN_ULONG w)
-	{
-	BN_ULONG c1=0;
-
-	if (num <= 0) return(c1);
-
-	while (num&~3)
-		{
-		mul_add(rp[0],ap[0],w,c1);
-		mul_add(rp[1],ap[1],w,c1);
-		mul_add(rp[2],ap[2],w,c1);
-		mul_add(rp[3],ap[3],w,c1);
-		ap+=4; rp+=4; num-=4;
-		}
-	if (num)
-		{
-		mul_add(rp[0],ap[0],w,c1); if (--num==0) return c1;
-		mul_add(rp[1],ap[1],w,c1); if (--num==0) return c1;
-		mul_add(rp[2],ap[2],w,c1); return c1;
-		}
-	
-	return(c1);
-	} 
-
-BN_ULONG bn_mul_words(BN_ULONG *rp, BN_ULONG *ap, int num, BN_ULONG w)
-	{
-	BN_ULONG c1=0;
-
-	if (num <= 0) return(c1);
-
-	while (num&~3)
-		{
-		mul(rp[0],ap[0],w,c1);
-		mul(rp[1],ap[1],w,c1);
-		mul(rp[2],ap[2],w,c1);
-		mul(rp[3],ap[3],w,c1);
-		ap+=4; rp+=4; num-=4;
-		}
-	if (num)
-		{
-		mul(rp[0],ap[0],w,c1); if (--num == 0) return c1;
-		mul(rp[1],ap[1],w,c1); if (--num == 0) return c1;
-		mul(rp[2],ap[2],w,c1);
-		}
-	return(c1);
-	} 
-
-void bn_sqr_words(BN_ULONG *r, BN_ULONG *a, int n)
-        {
-	if (n <= 0) return;
-
-	while (n&~3)
-		{
-		sqr(r[0],r[1],a[0]);
-		sqr(r[2],r[3],a[1]);
-		sqr(r[4],r[5],a[2]);
-		sqr(r[6],r[7],a[3]);
-		a+=4; r+=8; n-=4;
-		}
-	if (n)
-		{
-		sqr(r[0],r[1],a[0]); if (--n == 0) return;
-		sqr(r[2],r[3],a[1]); if (--n == 0) return;
-		sqr(r[4],r[5],a[2]);
-		}
-	}
-
-BN_ULONG bn_div_words(BN_ULONG h, BN_ULONG l, BN_ULONG d)
-{	BN_ULONG ret,waste;
-
-	asm ("divq	%4"
-		: "=a"(ret),"=d"(waste)
-		: "a"(l),"d"(h),"g"(d)
-		: "cc");
-
-	return ret;
-}
-
-BN_ULONG bn_add_words (BN_ULONG *rp, BN_ULONG *ap, BN_ULONG *bp,int n)
-{ BN_ULONG ret=0,i=0;
-
-	if (n <= 0) return 0;
-
-	asm (
-	"	subq	%2,%2		\n"
-	".align 16			\n"
-	"1:	movq	(%4,%2,8),%0	\n"
-	"	adcq	(%5,%2,8),%0	\n"
-	"	movq	%0,(%3,%2,8)	\n"
-	"	leaq	1(%2),%2	\n"
-	"	loop	1b		\n"
-	"	sbbq	%0,%0		\n"
-		: "=&a"(ret),"+c"(n),"=&r"(i)
-		: "r"(rp),"r"(ap),"r"(bp)
-		: "cc"
-	);
-
-  return ret&1;
-}
-
-#ifndef SIMICS
-BN_ULONG bn_sub_words (BN_ULONG *rp, BN_ULONG *ap, BN_ULONG *bp,int n)
-{ BN_ULONG ret=0,i=0;
-
-	if (n <= 0) return 0;
-
-	asm (
-	"	subq	%2,%2		\n"
-	".align 16			\n"
-	"1:	movq	(%4,%2,8),%0	\n"
-	"	sbbq	(%5,%2,8),%0	\n"
-	"	movq	%0,(%3,%2,8)	\n"
-	"	leaq	1(%2),%2	\n"
-	"	loop	1b		\n"
-	"	sbbq	%0,%0		\n"
-		: "=&a"(ret),"+c"(n),"=&r"(i)
-		: "r"(rp),"r"(ap),"r"(bp)
-		: "cc"
-	);
-
-  return ret&1;
-}
-#else
-/* Simics 1.4<7 has buggy sbbq:-( */
-#define BN_MASK2 0xffffffffffffffffL
-BN_ULONG bn_sub_words(BN_ULONG *r, BN_ULONG *a, BN_ULONG *b, int n)
-        {
-	BN_ULONG t1,t2;
-	int c=0;
-
-	if (n <= 0) return((BN_ULONG)0);
-
-	for (;;)
-		{
-		t1=a[0]; t2=b[0];
-		r[0]=(t1-t2-c)&BN_MASK2;
-		if (t1 != t2) c=(t1 < t2);
-		if (--n <= 0) break;
-
-		t1=a[1]; t2=b[1];
-		r[1]=(t1-t2-c)&BN_MASK2;
-		if (t1 != t2) c=(t1 < t2);
-		if (--n <= 0) break;
-
-		t1=a[2]; t2=b[2];
-		r[2]=(t1-t2-c)&BN_MASK2;
-		if (t1 != t2) c=(t1 < t2);
-		if (--n <= 0) break;
-
-		t1=a[3]; t2=b[3];
-		r[3]=(t1-t2-c)&BN_MASK2;
-		if (t1 != t2) c=(t1 < t2);
-		if (--n <= 0) break;
-
-		a+=4;
-		b+=4;
-		r+=4;
-		}
-	return(c);
-	}
-#endif
-
-/* mul_add_c(a,b,c0,c1,c2)  -- c+=a*b for three word number c=(c2,c1,c0) */
-/* mul_add_c2(a,b,c0,c1,c2) -- c+=2*a*b for three word number c=(c2,c1,c0) */
-/* sqr_add_c(a,i,c0,c1,c2)  -- c+=a[i]^2 for three word number c=(c2,c1,c0) */
-/* sqr_add_c2(a,i,c0,c1,c2) -- c+=2*a[i]*a[j] for three word number c=(c2,c1,c0) */
-
-#if 0
-/* original macros are kept for reference purposes */
-#define mul_add_c(a,b,c0,c1,c2) {	\
-	BN_ULONG ta=(a),tb=(b);		\
-	t1 = ta * tb;			\
-	t2 = BN_UMULT_HIGH(ta,tb);	\
-	c0 += t1; t2 += (c0<t1)?1:0;	\
-	c1 += t2; c2 += (c1<t2)?1:0;	\
-	}
-
-#define mul_add_c2(a,b,c0,c1,c2) {	\
-	BN_ULONG ta=(a),tb=(b),t0;	\
-	t1 = BN_UMULT_HIGH(ta,tb);	\
-	t0 = ta * tb;			\
-	t2 = t1+t1; c2 += (t2<t1)?1:0;	\
-	t1 = t0+t0; t2 += (t1<t0)?1:0;	\
-	c0 += t1; t2 += (c0<t1)?1:0;	\
-	c1 += t2; c2 += (c1<t2)?1:0;	\
-	}
-#else
-#define mul_add_c(a,b,c0,c1,c2)	do {	\
-	asm ("mulq %3"			\
-		: "=a"(t1),"=d"(t2)	\
-		: "a"(a),"m"(b)		\
-		: "cc");		\
-	asm ("addq %2,%0; adcq %3,%1"	\
-		: "+r"(c0),"+d"(t2)	\
-		: "a"(t1),"g"(0)	\
-		: "cc");		\
-	asm ("addq %2,%0; adcq %3,%1"	\
-		: "+r"(c1),"+r"(c2)	\
-		: "d"(t2),"g"(0)	\
-		: "cc");		\
-	} while (0)
-
-#define sqr_add_c(a,i,c0,c1,c2)	do {	\
-	asm ("mulq %2"			\
-		: "=a"(t1),"=d"(t2)	\
-		: "a"(a[i])		\
-		: "cc");		\
-	asm ("addq %2,%0; adcq %3,%1"	\
-		: "+r"(c0),"+d"(t2)	\
-		: "a"(t1),"g"(0)	\
-		: "cc");		\
-	asm ("addq %2,%0; adcq %3,%1"	\
-		: "+r"(c1),"+r"(c2)	\
-		: "d"(t2),"g"(0)	\
-		: "cc");		\
-	} while (0)
-
-#define mul_add_c2(a,b,c0,c1,c2) do {	\
-	asm ("mulq %3"			\
-		: "=a"(t1),"=d"(t2)	\
-		: "a"(a),"m"(b)		\
-		: "cc");		\
-	asm ("addq %0,%0; adcq %2,%1"	\
-		: "+d"(t2),"+r"(c2)	\
-		: "g"(0)		\
-		: "cc");		\
-	asm ("addq %0,%0; adcq %2,%1"	\
-		: "+a"(t1),"+d"(t2)	\
-		: "g"(0)		\
-		: "cc");		\
-	asm ("addq %2,%0; adcq %3,%1"	\
-		: "+r"(c0),"+d"(t2)	\
-		: "a"(t1),"g"(0)	\
-		: "cc");		\
-	asm ("addq %2,%0; adcq %3,%1"	\
-		: "+r"(c1),"+r"(c2)	\
-		: "d"(t2),"g"(0)	\
-		: "cc");		\
-	} while (0)
-#endif
-
-#define sqr_add_c2(a,i,j,c0,c1,c2)	\
-	mul_add_c2((a)[i],(a)[j],c0,c1,c2)
-
-void bn_mul_comba8(BN_ULONG *r, BN_ULONG *a, BN_ULONG *b)
-	{
-	BN_ULONG t1,t2;
-	BN_ULONG c1,c2,c3;
-
-	c1=0;
-	c2=0;
-	c3=0;
-	mul_add_c(a[0],b[0],c1,c2,c3);
-	r[0]=c1;
-	c1=0;
-	mul_add_c(a[0],b[1],c2,c3,c1);
-	mul_add_c(a[1],b[0],c2,c3,c1);
-	r[1]=c2;
-	c2=0;
-	mul_add_c(a[2],b[0],c3,c1,c2);
-	mul_add_c(a[1],b[1],c3,c1,c2);
-	mul_add_c(a[0],b[2],c3,c1,c2);
-	r[2]=c3;
-	c3=0;
-	mul_add_c(a[0],b[3],c1,c2,c3);
-	mul_add_c(a[1],b[2],c1,c2,c3);
-	mul_add_c(a[2],b[1],c1,c2,c3);
-	mul_add_c(a[3],b[0],c1,c2,c3);
-	r[3]=c1;
-	c1=0;
-	mul_add_c(a[4],b[0],c2,c3,c1);
-	mul_add_c(a[3],b[1],c2,c3,c1);
-	mul_add_c(a[2],b[2],c2,c3,c1);
-	mul_add_c(a[1],b[3],c2,c3,c1);
-	mul_add_c(a[0],b[4],c2,c3,c1);
-	r[4]=c2;
-	c2=0;
-	mul_add_c(a[0],b[5],c3,c1,c2);
-	mul_add_c(a[1],b[4],c3,c1,c2);
-	mul_add_c(a[2],b[3],c3,c1,c2);
-	mul_add_c(a[3],b[2],c3,c1,c2);
-	mul_add_c(a[4],b[1],c3,c1,c2);
-	mul_add_c(a[5],b[0],c3,c1,c2);
-	r[5]=c3;
-	c3=0;
-	mul_add_c(a[6],b[0],c1,c2,c3);
-	mul_add_c(a[5],b[1],c1,c2,c3);
-	mul_add_c(a[4],b[2],c1,c2,c3);
-	mul_add_c(a[3],b[3],c1,c2,c3);
-	mul_add_c(a[2],b[4],c1,c2,c3);
-	mul_add_c(a[1],b[5],c1,c2,c3);
-	mul_add_c(a[0],b[6],c1,c2,c3);
-	r[6]=c1;
-	c1=0;
-	mul_add_c(a[0],b[7],c2,c3,c1);
-	mul_add_c(a[1],b[6],c2,c3,c1);
-	mul_add_c(a[2],b[5],c2,c3,c1);
-	mul_add_c(a[3],b[4],c2,c3,c1);
-	mul_add_c(a[4],b[3],c2,c3,c1);
-	mul_add_c(a[5],b[2],c2,c3,c1);
-	mul_add_c(a[6],b[1],c2,c3,c1);
-	mul_add_c(a[7],b[0],c2,c3,c1);
-	r[7]=c2;
-	c2=0;
-	mul_add_c(a[7],b[1],c3,c1,c2);
-	mul_add_c(a[6],b[2],c3,c1,c2);
-	mul_add_c(a[5],b[3],c3,c1,c2);
-	mul_add_c(a[4],b[4],c3,c1,c2);
-	mul_add_c(a[3],b[5],c3,c1,c2);
-	mul_add_c(a[2],b[6],c3,c1,c2);
-	mul_add_c(a[1],b[7],c3,c1,c2);
-	r[8]=c3;
-	c3=0;
-	mul_add_c(a[2],b[7],c1,c2,c3);
-	mul_add_c(a[3],b[6],c1,c2,c3);
-	mul_add_c(a[4],b[5],c1,c2,c3);
-	mul_add_c(a[5],b[4],c1,c2,c3);
-	mul_add_c(a[6],b[3],c1,c2,c3);
-	mul_add_c(a[7],b[2],c1,c2,c3);
-	r[9]=c1;
-	c1=0;
-	mul_add_c(a[7],b[3],c2,c3,c1);
-	mul_add_c(a[6],b[4],c2,c3,c1);
-	mul_add_c(a[5],b[5],c2,c3,c1);
-	mul_add_c(a[4],b[6],c2,c3,c1);
-	mul_add_c(a[3],b[7],c2,c3,c1);
-	r[10]=c2;
-	c2=0;
-	mul_add_c(a[4],b[7],c3,c1,c2);
-	mul_add_c(a[5],b[6],c3,c1,c2);
-	mul_add_c(a[6],b[5],c3,c1,c2);
-	mul_add_c(a[7],b[4],c3,c1,c2);
-	r[11]=c3;
-	c3=0;
-	mul_add_c(a[7],b[5],c1,c2,c3);
-	mul_add_c(a[6],b[6],c1,c2,c3);
-	mul_add_c(a[5],b[7],c1,c2,c3);
-	r[12]=c1;
-	c1=0;
-	mul_add_c(a[6],b[7],c2,c3,c1);
-	mul_add_c(a[7],b[6],c2,c3,c1);
-	r[13]=c2;
-	c2=0;
-	mul_add_c(a[7],b[7],c3,c1,c2);
-	r[14]=c3;
-	r[15]=c1;
-	}
-
-void bn_mul_comba4(BN_ULONG *r, BN_ULONG *a, BN_ULONG *b)
-	{
-	BN_ULONG t1,t2;
-	BN_ULONG c1,c2,c3;
-
-	c1=0;
-	c2=0;
-	c3=0;
-	mul_add_c(a[0],b[0],c1,c2,c3);
-	r[0]=c1;
-	c1=0;
-	mul_add_c(a[0],b[1],c2,c3,c1);
-	mul_add_c(a[1],b[0],c2,c3,c1);
-	r[1]=c2;
-	c2=0;
-	mul_add_c(a[2],b[0],c3,c1,c2);
-	mul_add_c(a[1],b[1],c3,c1,c2);
-	mul_add_c(a[0],b[2],c3,c1,c2);
-	r[2]=c3;
-	c3=0;
-	mul_add_c(a[0],b[3],c1,c2,c3);
-	mul_add_c(a[1],b[2],c1,c2,c3);
-	mul_add_c(a[2],b[1],c1,c2,c3);
-	mul_add_c(a[3],b[0],c1,c2,c3);
-	r[3]=c1;
-	c1=0;
-	mul_add_c(a[3],b[1],c2,c3,c1);
-	mul_add_c(a[2],b[2],c2,c3,c1);
-	mul_add_c(a[1],b[3],c2,c3,c1);
-	r[4]=c2;
-	c2=0;
-	mul_add_c(a[2],b[3],c3,c1,c2);
-	mul_add_c(a[3],b[2],c3,c1,c2);
-	r[5]=c3;
-	c3=0;
-	mul_add_c(a[3],b[3],c1,c2,c3);
-	r[6]=c1;
-	r[7]=c2;
-	}
-
-void bn_sqr_comba8(BN_ULONG *r, BN_ULONG *a)
-	{
-	BN_ULONG t1,t2;
-	BN_ULONG c1,c2,c3;
-
-	c1=0;
-	c2=0;
-	c3=0;
-	sqr_add_c(a,0,c1,c2,c3);
-	r[0]=c1;
-	c1=0;
-	sqr_add_c2(a,1,0,c2,c3,c1);
-	r[1]=c2;
-	c2=0;
-	sqr_add_c(a,1,c3,c1,c2);
-	sqr_add_c2(a,2,0,c3,c1,c2);
-	r[2]=c3;
-	c3=0;
-	sqr_add_c2(a,3,0,c1,c2,c3);
-	sqr_add_c2(a,2,1,c1,c2,c3);
-	r[3]=c1;
-	c1=0;
-	sqr_add_c(a,2,c2,c3,c1);
-	sqr_add_c2(a,3,1,c2,c3,c1);
-	sqr_add_c2(a,4,0,c2,c3,c1);
-	r[4]=c2;
-	c2=0;
-	sqr_add_c2(a,5,0,c3,c1,c2);
-	sqr_add_c2(a,4,1,c3,c1,c2);
-	sqr_add_c2(a,3,2,c3,c1,c2);
-	r[5]=c3;
-	c3=0;
-	sqr_add_c(a,3,c1,c2,c3);
-	sqr_add_c2(a,4,2,c1,c2,c3);
-	sqr_add_c2(a,5,1,c1,c2,c3);
-	sqr_add_c2(a,6,0,c1,c2,c3);
-	r[6]=c1;
-	c1=0;
-	sqr_add_c2(a,7,0,c2,c3,c1);
-	sqr_add_c2(a,6,1,c2,c3,c1);
-	sqr_add_c2(a,5,2,c2,c3,c1);
-	sqr_add_c2(a,4,3,c2,c3,c1);
-	r[7]=c2;
-	c2=0;
-	sqr_add_c(a,4,c3,c1,c2);
-	sqr_add_c2(a,5,3,c3,c1,c2);
-	sqr_add_c2(a,6,2,c3,c1,c2);
-	sqr_add_c2(a,7,1,c3,c1,c2);
-	r[8]=c3;
-	c3=0;
-	sqr_add_c2(a,7,2,c1,c2,c3);
-	sqr_add_c2(a,6,3,c1,c2,c3);
-	sqr_add_c2(a,5,4,c1,c2,c3);
-	r[9]=c1;
-	c1=0;
-	sqr_add_c(a,5,c2,c3,c1);
-	sqr_add_c2(a,6,4,c2,c3,c1);
-	sqr_add_c2(a,7,3,c2,c3,c1);
-	r[10]=c2;
-	c2=0;
-	sqr_add_c2(a,7,4,c3,c1,c2);
-	sqr_add_c2(a,6,5,c3,c1,c2);
-	r[11]=c3;
-	c3=0;
-	sqr_add_c(a,6,c1,c2,c3);
-	sqr_add_c2(a,7,5,c1,c2,c3);
-	r[12]=c1;
-	c1=0;
-	sqr_add_c2(a,7,6,c2,c3,c1);
-	r[13]=c2;
-	c2=0;
-	sqr_add_c(a,7,c3,c1,c2);
-	r[14]=c3;
-	r[15]=c1;
-	}
-
-void bn_sqr_comba4(BN_ULONG *r, BN_ULONG *a)
-	{
-	BN_ULONG t1,t2;
-	BN_ULONG c1,c2,c3;
-
-	c1=0;
-	c2=0;
-	c3=0;
-	sqr_add_c(a,0,c1,c2,c3);
-	r[0]=c1;
-	c1=0;
-	sqr_add_c2(a,1,0,c2,c3,c1);
-	r[1]=c2;
-	c2=0;
-	sqr_add_c(a,1,c3,c1,c2);
-	sqr_add_c2(a,2,0,c3,c1,c2);
-	r[2]=c3;
-	c3=0;
-	sqr_add_c2(a,3,0,c1,c2,c3);
-	sqr_add_c2(a,2,1,c1,c2,c3);
-	r[3]=c1;
-	c1=0;
-	sqr_add_c(a,2,c2,c3,c1);
-	sqr_add_c2(a,3,1,c2,c3,c1);
-	r[4]=c2;
-	c2=0;
-	sqr_add_c2(a,3,2,c3,c1,c2);
-	r[5]=c3;
-	c3=0;
-	sqr_add_c(a,3,c1,c2,c3);
-	r[6]=c1;
-	r[7]=c2;
-	}
-#endif
diff --git a/crypto/openssl/crypto/bn/bn.h b/crypto/openssl/crypto/bn/bn.h
deleted file mode 100644
index 95c5d643cbd1..000000000000
--- a/crypto/openssl/crypto/bn/bn.h
+++ /dev/null
@@ -1,827 +0,0 @@
-/* crypto/bn/bn.h */
-/* Copyright (C) 1995-1997 Eric Young (eay@cryptsoft.com)
- * All rights reserved.
- *
- * This package is an SSL implementation written
- * by Eric Young (eay@cryptsoft.com).
- * The implementation was written so as to conform with Netscapes SSL.
- * 
- * This library is free for commercial and non-commercial use as long as
- * the following conditions are aheared to.  The following conditions
- * apply to all code found in this distribution, be it the RC4, RSA,
- * lhash, DES, etc., code; not just the SSL code.  The SSL documentation
- * included with this distribution is covered by the same copyright terms
- * except that the holder is Tim Hudson (tjh@cryptsoft.com).
- * 
- * Copyright remains Eric Young's, and as such any Copyright notices in
- * the code are not to be removed.
- * If this package is used in a product, Eric Young should be given attribution
- * as the author of the parts of the library used.
- * This can be in the form of a textual message at program startup or
- * in documentation (online or textual) provided with the package.
- * 
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions
- * are met:
- * 1. Redistributions of source code must retain the copyright
- *    notice, this list of conditions and the following disclaimer.
- * 2. Redistributions in binary form must reproduce the above copyright
- *    notice, this list of conditions and the following disclaimer in the
- *    documentation and/or other materials provided with the distribution.
- * 3. All advertising materials mentioning features or use of this software
- *    must display the following acknowledgement:
- *    "This product includes cryptographic software written by
- *     Eric Young (eay@cryptsoft.com)"
- *    The word 'cryptographic' can be left out if the rouines from the library
- *    being used are not cryptographic related :-).
- * 4. If you include any Windows specific code (or a derivative thereof) from 
- *    the apps directory (application code) you must include an acknowledgement:
- *    "This product includes software written by Tim Hudson (tjh@cryptsoft.com)"
- * 
- * THIS SOFTWARE IS PROVIDED BY ERIC YOUNG ``AS IS'' AND
- * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
- * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
- * ARE DISCLAIMED.  IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE
- * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
- * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
- * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
- * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
- * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
- * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
- * SUCH DAMAGE.
- * 
- * The licence and distribution terms for any publically available version or
- * derivative of this code cannot be changed.  i.e. this code cannot simply be
- * copied and put under another distribution licence
- * [including the GNU Public Licence.]
- */
-/* ====================================================================
- * Copyright 2002 Sun Microsystems, Inc. ALL RIGHTS RESERVED.
- *
- * Portions of the attached software ("Contribution") are developed by 
- * SUN MICROSYSTEMS, INC., and are contributed to the OpenSSL project.
- *
- * The Contribution is licensed pursuant to the Eric Young open source
- * license provided above.
- *
- * The binary polynomial arithmetic software is originally written by 
- * Sheueling Chang Shantz and Douglas Stebila of Sun Microsystems Laboratories.
- *
- */
-
-#ifndef HEADER_BN_H
-#define HEADER_BN_H
-
-#include <openssl/e_os2.h>
-#ifndef OPENSSL_NO_FP_API
-#include <stdio.h> /* FILE */
-#endif
-#include <openssl/ossl_typ.h>
-
-#ifdef  __cplusplus
-extern "C" {
-#endif
-
-/* These preprocessor symbols control various aspects of the bignum headers and
- * library code. They're not defined by any "normal" configuration, as they are
- * intended for development and testing purposes. NB: defining all three can be
- * useful for debugging application code as well as openssl itself.
- *
- * BN_DEBUG - turn on various debugging alterations to the bignum code
- * BN_DEBUG_RAND - uses random poisoning of unused words to trip up
- * mismanagement of bignum internals. You must also define BN_DEBUG.
- */
-/* #define BN_DEBUG */
-/* #define BN_DEBUG_RAND */
-
-#define BN_MUL_COMBA
-#define BN_SQR_COMBA
-#define BN_RECURSION
-
-/* This next option uses the C libraries (2 word)/(1 word) function.
- * If it is not defined, I use my C version (which is slower).
- * The reason for this flag is that when the particular C compiler
- * library routine is used, and the library is linked with a different
- * compiler, the library is missing.  This mostly happens when the
- * library is built with gcc and then linked using normal cc.  This would
- * be a common occurrence because gcc normally produces code that is
- * 2 times faster than system compilers for the big number stuff.
- * For machines with only one compiler (or shared libraries), this should
- * be on.  Again this in only really a problem on machines
- * using "long long's", are 32bit, and are not using my assembler code. */
-#if defined(OPENSSL_SYS_MSDOS) || defined(OPENSSL_SYS_WINDOWS) || \
-    defined(OPENSSL_SYS_WIN32) || defined(linux)
-# ifndef BN_DIV2W
-#  define BN_DIV2W
-# endif
-#endif
-
-/* assuming long is 64bit - this is the DEC Alpha
- * unsigned long long is only 64 bits :-(, don't define
- * BN_LLONG for the DEC Alpha */
-#ifdef SIXTY_FOUR_BIT_LONG
-#define BN_ULLONG	unsigned long long
-#define BN_ULONG	unsigned long
-#define BN_LONG		long
-#define BN_BITS		128
-#define BN_BYTES	8
-#define BN_BITS2	64
-#define BN_BITS4	32
-#define BN_MASK		(0xffffffffffffffffffffffffffffffffLL)
-#define BN_MASK2	(0xffffffffffffffffL)
-#define BN_MASK2l	(0xffffffffL)
-#define BN_MASK2h	(0xffffffff00000000L)
-#define BN_MASK2h1	(0xffffffff80000000L)
-#define BN_TBIT		(0x8000000000000000L)
-#define BN_DEC_CONV	(10000000000000000000UL)
-#define BN_DEC_FMT1	"%lu"
-#define BN_DEC_FMT2	"%019lu"
-#define BN_DEC_NUM	19
-#endif
-
-/* This is where the long long data type is 64 bits, but long is 32.
- * For machines where there are 64bit registers, this is the mode to use.
- * IRIX, on R4000 and above should use this mode, along with the relevant
- * assembler code :-).  Do NOT define BN_LLONG.
- */
-#ifdef SIXTY_FOUR_BIT
-#undef BN_LLONG
-#undef BN_ULLONG
-#define BN_ULONG	unsigned long long
-#define BN_LONG		long long
-#define BN_BITS		128
-#define BN_BYTES	8
-#define BN_BITS2	64
-#define BN_BITS4	32
-#define BN_MASK2	(0xffffffffffffffffLL)
-#define BN_MASK2l	(0xffffffffL)
-#define BN_MASK2h	(0xffffffff00000000LL)
-#define BN_MASK2h1	(0xffffffff80000000LL)
-#define BN_TBIT		(0x8000000000000000LL)
-#define BN_DEC_CONV	(10000000000000000000ULL)
-#define BN_DEC_FMT1	"%llu"
-#define BN_DEC_FMT2	"%019llu"
-#define BN_DEC_NUM	19
-#endif
-
-#ifdef THIRTY_TWO_BIT
-#ifdef BN_LLONG
-# if defined(OPENSSL_SYS_WIN32) && !defined(__GNUC__)
-#  define BN_ULLONG	unsigned __int64
-# else
-#  define BN_ULLONG	unsigned long long
-# endif
-#endif
-#define BN_ULONG	unsigned long
-#define BN_LONG		long
-#define BN_BITS		64
-#define BN_BYTES	4
-#define BN_BITS2	32
-#define BN_BITS4	16
-#ifdef OPENSSL_SYS_WIN32
-/* VC++ doesn't like the LL suffix */
-#define BN_MASK		(0xffffffffffffffffL)
-#else
-#define BN_MASK		(0xffffffffffffffffLL)
-#endif
-#define BN_MASK2	(0xffffffffL)
-#define BN_MASK2l	(0xffff)
-#define BN_MASK2h1	(0xffff8000L)
-#define BN_MASK2h	(0xffff0000L)
-#define BN_TBIT		(0x80000000L)
-#define BN_DEC_CONV	(1000000000L)
-#define BN_DEC_FMT1	"%lu"
-#define BN_DEC_FMT2	"%09lu"
-#define BN_DEC_NUM	9
-#endif
-
-#ifdef SIXTEEN_BIT
-#ifndef BN_DIV2W
-#define BN_DIV2W
-#endif
-#define BN_ULLONG	unsigned long
-#define BN_ULONG	unsigned short
-#define BN_LONG		short
-#define BN_BITS		32
-#define BN_BYTES	2
-#define BN_BITS2	16
-#define BN_BITS4	8
-#define BN_MASK		(0xffffffff)
-#define BN_MASK2	(0xffff)
-#define BN_MASK2l	(0xff)
-#define BN_MASK2h1	(0xff80)
-#define BN_MASK2h	(0xff00)
-#define BN_TBIT		(0x8000)
-#define BN_DEC_CONV	(100000)
-#define BN_DEC_FMT1	"%u"
-#define BN_DEC_FMT2	"%05u"
-#define BN_DEC_NUM	5
-#endif
-
-#ifdef EIGHT_BIT
-#ifndef BN_DIV2W
-#define BN_DIV2W
-#endif
-#define BN_ULLONG	unsigned short
-#define BN_ULONG	unsigned char
-#define BN_LONG		char
-#define BN_BITS		16
-#define BN_BYTES	1
-#define BN_BITS2	8
-#define BN_BITS4	4
-#define BN_MASK		(0xffff)
-#define BN_MASK2	(0xff)
-#define BN_MASK2l	(0xf)
-#define BN_MASK2h1	(0xf8)
-#define BN_MASK2h	(0xf0)
-#define BN_TBIT		(0x80)
-#define BN_DEC_CONV	(100)
-#define BN_DEC_FMT1	"%u"
-#define BN_DEC_FMT2	"%02u"
-#define BN_DEC_NUM	2
-#endif
-
-#define BN_DEFAULT_BITS	1280
-
-#define BN_FLG_MALLOCED		0x01
-#define BN_FLG_STATIC_DATA	0x02
-#define BN_FLG_EXP_CONSTTIME	0x04 /* avoid leaking exponent information through timings
-                            	      * (BN_mod_exp_mont() will call BN_mod_exp_mont_consttime) */
-#ifndef OPENSSL_NO_DEPRECATED
-#define BN_FLG_FREE		0x8000	/* used for debuging */
-#endif
-#define BN_set_flags(b,n)	((b)->flags|=(n))
-#define BN_get_flags(b,n)	((b)->flags&(n))
-
-/* get a clone of a BIGNUM with changed flags, for *temporary* use only
- * (the two BIGNUMs cannot not be used in parallel!) */
-#define BN_with_flags(dest,b,n)  ((dest)->d=(b)->d, \
-                                  (dest)->top=(b)->top, \
-                                  (dest)->dmax=(b)->dmax, \
-                                  (dest)->neg=(b)->neg, \
-                                  (dest)->flags=(((dest)->flags & BN_FLG_MALLOCED) \
-                                                 |  ((b)->flags & ~BN_FLG_MALLOCED) \
-                                                 |  BN_FLG_STATIC_DATA \
-                                                 |  (n)))
-
-/* Already declared in ossl_typ.h */
-#if 0
-typedef struct bignum_st BIGNUM;
-/* Used for temp variables (declaration hidden in bn_lcl.h) */
-typedef struct bignum_ctx BN_CTX;
-typedef struct bn_blinding_st BN_BLINDING;
-typedef struct bn_mont_ctx_st BN_MONT_CTX;
-typedef struct bn_recp_ctx_st BN_RECP_CTX;
-typedef struct bn_gencb_st BN_GENCB;
-#endif
-
-struct bignum_st
-	{
-	BN_ULONG *d;	/* Pointer to an array of 'BN_BITS2' bit chunks. */
-	int top;	/* Index of last used d +1. */
-	/* The next are internal book keeping for bn_expand. */
-	int dmax;	/* Size of the d array. */
-	int neg;	/* one if the number is negative */
-	int flags;
-	};
-
-/* Used for montgomery multiplication */
-struct bn_mont_ctx_st
-	{
-	int ri;        /* number of bits in R */
-	BIGNUM RR;     /* used to convert to montgomery form */
-	BIGNUM N;      /* The modulus */
-	BIGNUM Ni;     /* R*(1/R mod N) - N*Ni = 1
-	                * (Ni is only stored for bignum algorithm) */
-	BN_ULONG n0;   /* least significant word of Ni */
-	int flags;
-	};
-
-/* Used for reciprocal division/mod functions
- * It cannot be shared between threads
- */
-struct bn_recp_ctx_st
-	{
-	BIGNUM N;	/* the divisor */
-	BIGNUM Nr;	/* the reciprocal */
-	int num_bits;
-	int shift;
-	int flags;
-	};
-
-/* Used for slow "generation" functions. */
-struct bn_gencb_st
-	{
-	unsigned int ver;	/* To handle binary (in)compatibility */
-	void *arg;		/* callback-specific data */
-	union
-		{
-		/* if(ver==1) - handles old style callbacks */
-		void (*cb_1)(int, int, void *);
-		/* if(ver==2) - new callback style */
-		int (*cb_2)(int, int, BN_GENCB *);
-		} cb;
-	};
-/* Wrapper function to make using BN_GENCB easier,  */
-int BN_GENCB_call(BN_GENCB *cb, int a, int b);
-/* Macro to populate a BN_GENCB structure with an "old"-style callback */
-#define BN_GENCB_set_old(gencb, callback, cb_arg) { \
-		BN_GENCB *tmp_gencb = (gencb); \
-		tmp_gencb->ver = 1; \
-		tmp_gencb->arg = (cb_arg); \
-		tmp_gencb->cb.cb_1 = (callback); }
-/* Macro to populate a BN_GENCB structure with a "new"-style callback */
-#define BN_GENCB_set(gencb, callback, cb_arg) { \
-		BN_GENCB *tmp_gencb = (gencb); \
-		tmp_gencb->ver = 2; \
-		tmp_gencb->arg = (cb_arg); \
-		tmp_gencb->cb.cb_2 = (callback); }
-
-#define BN_prime_checks 0 /* default: select number of iterations
-			     based on the size of the number */
-
-/* number of Miller-Rabin iterations for an error rate  of less than 2^-80
- * for random 'b'-bit input, b >= 100 (taken from table 4.4 in the Handbook
- * of Applied Cryptography [Menezes, van Oorschot, Vanstone; CRC Press 1996];
- * original paper: Damgaard, Landrock, Pomerance: Average case error estimates
- * for the strong probable prime test. -- Math. Comp. 61 (1993) 177-194) */
-#define BN_prime_checks_for_size(b) ((b) >= 1300 ?  2 : \
-                                (b) >=  850 ?  3 : \
-                                (b) >=  650 ?  4 : \
-                                (b) >=  550 ?  5 : \
-                                (b) >=  450 ?  6 : \
-                                (b) >=  400 ?  7 : \
-                                (b) >=  350 ?  8 : \
-                                (b) >=  300 ?  9 : \
-                                (b) >=  250 ? 12 : \
-                                (b) >=  200 ? 15 : \
-                                (b) >=  150 ? 18 : \
-                                /* b >= 100 */ 27)
-
-#define BN_num_bytes(a)	((BN_num_bits(a)+7)/8)
-
-/* Note that BN_abs_is_word didn't work reliably for w == 0 until 0.9.8 */
-#define BN_abs_is_word(a,w) ((((a)->top == 1) && ((a)->d[0] == (BN_ULONG)(w))) || \
-				(((w) == 0) && ((a)->top == 0)))
-#define BN_is_zero(a)       ((a)->top == 0)
-#define BN_is_one(a)        (BN_abs_is_word((a),1) && !(a)->neg)
-#define BN_is_word(a,w)     (BN_abs_is_word((a),(w)) && (!(w) || !(a)->neg))
-#define BN_is_odd(a)	    (((a)->top > 0) && ((a)->d[0] & 1))
-
-#define BN_one(a)	(BN_set_word((a),1))
-#define BN_zero_ex(a) \
-	do { \
-		BIGNUM *_tmp_bn = (a); \
-		_tmp_bn->top = 0; \
-		_tmp_bn->neg = 0; \
-	} while(0)
-#ifdef OPENSSL_NO_DEPRECATED
-#define BN_zero(a)	BN_zero_ex(a)
-#else
-#define BN_zero(a)	(BN_set_word((a),0))
-#endif
-
-const BIGNUM *BN_value_one(void);
-char *	BN_options(void);
-BN_CTX *BN_CTX_new(void);
-#ifndef OPENSSL_NO_DEPRECATED
-void	BN_CTX_init(BN_CTX *c);
-#endif
-void	BN_CTX_free(BN_CTX *c);
-void	BN_CTX_start(BN_CTX *ctx);
-BIGNUM *BN_CTX_get(BN_CTX *ctx);
-void	BN_CTX_end(BN_CTX *ctx);
-int     BN_rand(BIGNUM *rnd, int bits, int top,int bottom);
-int     BN_pseudo_rand(BIGNUM *rnd, int bits, int top,int bottom);
-int	BN_rand_range(BIGNUM *rnd, BIGNUM *range);
-int	BN_pseudo_rand_range(BIGNUM *rnd, BIGNUM *range);
-int	BN_num_bits(const BIGNUM *a);
-int	BN_num_bits_word(BN_ULONG);
-BIGNUM *BN_new(void);
-void	BN_init(BIGNUM *);
-void	BN_clear_free(BIGNUM *a);
-BIGNUM *BN_copy(BIGNUM *a, const BIGNUM *b);
-void	BN_swap(BIGNUM *a, BIGNUM *b);
-BIGNUM *BN_bin2bn(const unsigned char *s,int len,BIGNUM *ret);
-int	BN_bn2bin(const BIGNUM *a, unsigned char *to);
-BIGNUM *BN_mpi2bn(const unsigned char *s,int len,BIGNUM *ret);
-int	BN_bn2mpi(const BIGNUM *a, unsigned char *to);
-int	BN_sub(BIGNUM *r, const BIGNUM *a, const BIGNUM *b);
-int	BN_usub(BIGNUM *r, const BIGNUM *a, const BIGNUM *b);
-int	BN_uadd(BIGNUM *r, const BIGNUM *a, const BIGNUM *b);
-int	BN_add(BIGNUM *r, const BIGNUM *a, const BIGNUM *b);
-int	BN_mul(BIGNUM *r, const BIGNUM *a, const BIGNUM *b, BN_CTX *ctx);
-int	BN_sqr(BIGNUM *r, const BIGNUM *a,BN_CTX *ctx);
-/** BN_set_negative sets sign of a BIGNUM
- * \param  b  pointer to the BIGNUM object
- * \param  n  0 if the BIGNUM b should be positive and a value != 0 otherwise 
- */
-void	BN_set_negative(BIGNUM *b, int n);
-/** BN_is_negative returns 1 if the BIGNUM is negative
- * \param  a  pointer to the BIGNUM object
- * \return 1 if a < 0 and 0 otherwise
- */
-#define BN_is_negative(a) ((a)->neg != 0)
-
-int	BN_div(BIGNUM *dv, BIGNUM *rem, const BIGNUM *m, const BIGNUM *d,
-	BN_CTX *ctx);
-#define BN_mod(rem,m,d,ctx) BN_div(NULL,(rem),(m),(d),(ctx))
-int	BN_nnmod(BIGNUM *r, const BIGNUM *m, const BIGNUM *d, BN_CTX *ctx);
-int	BN_mod_add(BIGNUM *r, const BIGNUM *a, const BIGNUM *b, const BIGNUM *m, BN_CTX *ctx);
-int	BN_mod_add_quick(BIGNUM *r, const BIGNUM *a, const BIGNUM *b, const BIGNUM *m);
-int	BN_mod_sub(BIGNUM *r, const BIGNUM *a, const BIGNUM *b, const BIGNUM *m, BN_CTX *ctx);
-int	BN_mod_sub_quick(BIGNUM *r, const BIGNUM *a, const BIGNUM *b, const BIGNUM *m);
-int	BN_mod_mul(BIGNUM *r, const BIGNUM *a, const BIGNUM *b,
-	const BIGNUM *m, BN_CTX *ctx);
-int	BN_mod_sqr(BIGNUM *r, const BIGNUM *a, const BIGNUM *m, BN_CTX *ctx);
-int	BN_mod_lshift1(BIGNUM *r, const BIGNUM *a, const BIGNUM *m, BN_CTX *ctx);
-int	BN_mod_lshift1_quick(BIGNUM *r, const BIGNUM *a, const BIGNUM *m);
-int	BN_mod_lshift(BIGNUM *r, const BIGNUM *a, int n, const BIGNUM *m, BN_CTX *ctx);
-int	BN_mod_lshift_quick(BIGNUM *r, const BIGNUM *a, int n, const BIGNUM *m);
-
-BN_ULONG BN_mod_word(const BIGNUM *a, BN_ULONG w);
-BN_ULONG BN_div_word(BIGNUM *a, BN_ULONG w);
-int	BN_mul_word(BIGNUM *a, BN_ULONG w);
-int	BN_add_word(BIGNUM *a, BN_ULONG w);
-int	BN_sub_word(BIGNUM *a, BN_ULONG w);
-int	BN_set_word(BIGNUM *a, BN_ULONG w);
-BN_ULONG BN_get_word(const BIGNUM *a);
-
-int	BN_cmp(const BIGNUM *a, const BIGNUM *b);
-void	BN_free(BIGNUM *a);
-int	BN_is_bit_set(const BIGNUM *a, int n);
-int	BN_lshift(BIGNUM *r, const BIGNUM *a, int n);
-int	BN_lshift1(BIGNUM *r, const BIGNUM *a);
-int	BN_exp(BIGNUM *r, const BIGNUM *a, const BIGNUM *p,BN_CTX *ctx);
-
-int	BN_mod_exp(BIGNUM *r, const BIGNUM *a, const BIGNUM *p,
-	const BIGNUM *m,BN_CTX *ctx);
-int	BN_mod_exp_mont(BIGNUM *r, const BIGNUM *a, const BIGNUM *p,
-	const BIGNUM *m, BN_CTX *ctx, BN_MONT_CTX *m_ctx);
-int BN_mod_exp_mont_consttime(BIGNUM *rr, const BIGNUM *a, const BIGNUM *p,
-	const BIGNUM *m, BN_CTX *ctx, BN_MONT_CTX *in_mont);
-int	BN_mod_exp_mont_word(BIGNUM *r, BN_ULONG a, const BIGNUM *p,
-	const BIGNUM *m, BN_CTX *ctx, BN_MONT_CTX *m_ctx);
-int	BN_mod_exp2_mont(BIGNUM *r, const BIGNUM *a1, const BIGNUM *p1,
-	const BIGNUM *a2, const BIGNUM *p2,const BIGNUM *m,
-	BN_CTX *ctx,BN_MONT_CTX *m_ctx);
-int	BN_mod_exp_simple(BIGNUM *r, const BIGNUM *a, const BIGNUM *p,
-	const BIGNUM *m,BN_CTX *ctx);
-
-int	BN_mask_bits(BIGNUM *a,int n);
-#ifndef OPENSSL_NO_FP_API
-int	BN_print_fp(FILE *fp, const BIGNUM *a);
-#endif
-#ifdef HEADER_BIO_H
-int	BN_print(BIO *fp, const BIGNUM *a);
-#else
-int	BN_print(void *fp, const BIGNUM *a);
-#endif
-int	BN_reciprocal(BIGNUM *r, const BIGNUM *m, int len, BN_CTX *ctx);
-int	BN_rshift(BIGNUM *r, const BIGNUM *a, int n);
-int	BN_rshift1(BIGNUM *r, const BIGNUM *a);
-void	BN_clear(BIGNUM *a);
-BIGNUM *BN_dup(const BIGNUM *a);
-int	BN_ucmp(const BIGNUM *a, const BIGNUM *b);
-int	BN_set_bit(BIGNUM *a, int n);
-int	BN_clear_bit(BIGNUM *a, int n);
-char *	BN_bn2hex(const BIGNUM *a);
-char *	BN_bn2dec(const BIGNUM *a);
-int 	BN_hex2bn(BIGNUM **a, const char *str);
-int 	BN_dec2bn(BIGNUM **a, const char *str);
-int	BN_gcd(BIGNUM *r,const BIGNUM *a,const BIGNUM *b,BN_CTX *ctx);
-int	BN_kronecker(const BIGNUM *a,const BIGNUM *b,BN_CTX *ctx); /* returns -2 for error */
-BIGNUM *BN_mod_inverse(BIGNUM *ret,
-	const BIGNUM *a, const BIGNUM *n,BN_CTX *ctx);
-BIGNUM *BN_mod_sqrt(BIGNUM *ret,
-	const BIGNUM *a, const BIGNUM *n,BN_CTX *ctx);
-
-/* Deprecated versions */
-#ifndef OPENSSL_NO_DEPRECATED
-BIGNUM *BN_generate_prime(BIGNUM *ret,int bits,int safe,
-	const BIGNUM *add, const BIGNUM *rem,
-	void (*callback)(int,int,void *),void *cb_arg);
-int	BN_is_prime(const BIGNUM *p,int nchecks,
-	void (*callback)(int,int,void *),
-	BN_CTX *ctx,void *cb_arg);
-int	BN_is_prime_fasttest(const BIGNUM *p,int nchecks,
-	void (*callback)(int,int,void *),BN_CTX *ctx,void *cb_arg,
-	int do_trial_division);
-#endif /* !defined(OPENSSL_NO_DEPRECATED) */
-
-/* Newer versions */
-int	BN_generate_prime_ex(BIGNUM *ret,int bits,int safe, const BIGNUM *add,
-		const BIGNUM *rem, BN_GENCB *cb);
-int	BN_is_prime_ex(const BIGNUM *p,int nchecks, BN_CTX *ctx, BN_GENCB *cb);
-int	BN_is_prime_fasttest_ex(const BIGNUM *p,int nchecks, BN_CTX *ctx,
-		int do_trial_division, BN_GENCB *cb);
-
-BN_MONT_CTX *BN_MONT_CTX_new(void );
-void BN_MONT_CTX_init(BN_MONT_CTX *ctx);
-int BN_mod_mul_montgomery(BIGNUM *r,const BIGNUM *a,const BIGNUM *b,
-	BN_MONT_CTX *mont, BN_CTX *ctx);
-#define BN_to_montgomery(r,a,mont,ctx)	BN_mod_mul_montgomery(\
-	(r),(a),&((mont)->RR),(mont),(ctx))
-int BN_from_montgomery(BIGNUM *r,const BIGNUM *a,
-	BN_MONT_CTX *mont, BN_CTX *ctx);
-void BN_MONT_CTX_free(BN_MONT_CTX *mont);
-int BN_MONT_CTX_set(BN_MONT_CTX *mont,const BIGNUM *mod,BN_CTX *ctx);
-BN_MONT_CTX *BN_MONT_CTX_copy(BN_MONT_CTX *to,BN_MONT_CTX *from);
-BN_MONT_CTX *BN_MONT_CTX_set_locked(BN_MONT_CTX **pmont, int lock,
-					const BIGNUM *mod, BN_CTX *ctx);
-
-/* BN_BLINDING flags */
-#define	BN_BLINDING_NO_UPDATE	0x00000001
-#define	BN_BLINDING_NO_RECREATE	0x00000002
-
-BN_BLINDING *BN_BLINDING_new(const BIGNUM *A, const BIGNUM *Ai, BIGNUM *mod);
-void BN_BLINDING_free(BN_BLINDING *b);
-int BN_BLINDING_update(BN_BLINDING *b,BN_CTX *ctx);
-int BN_BLINDING_convert(BIGNUM *n, BN_BLINDING *b, BN_CTX *ctx);
-int BN_BLINDING_invert(BIGNUM *n, BN_BLINDING *b, BN_CTX *ctx);
-int BN_BLINDING_convert_ex(BIGNUM *n, BIGNUM *r, BN_BLINDING *b, BN_CTX *);
-int BN_BLINDING_invert_ex(BIGNUM *n, const BIGNUM *r, BN_BLINDING *b, BN_CTX *);
-unsigned long BN_BLINDING_get_thread_id(const BN_BLINDING *);
-void BN_BLINDING_set_thread_id(BN_BLINDING *, unsigned long);
-unsigned long BN_BLINDING_get_flags(const BN_BLINDING *);
-void BN_BLINDING_set_flags(BN_BLINDING *, unsigned long);
-BN_BLINDING *BN_BLINDING_create_param(BN_BLINDING *b,
-	const BIGNUM *e, BIGNUM *m, BN_CTX *ctx,
-	int (*bn_mod_exp)(BIGNUM *r, const BIGNUM *a, const BIGNUM *p,
-			  const BIGNUM *m, BN_CTX *ctx, BN_MONT_CTX *m_ctx),
-	BN_MONT_CTX *m_ctx);
-
-#ifndef OPENSSL_NO_DEPRECATED
-void BN_set_params(int mul,int high,int low,int mont);
-int BN_get_params(int which); /* 0, mul, 1 high, 2 low, 3 mont */
-#endif
-
-void	BN_RECP_CTX_init(BN_RECP_CTX *recp);
-BN_RECP_CTX *BN_RECP_CTX_new(void);
-void	BN_RECP_CTX_free(BN_RECP_CTX *recp);
-int	BN_RECP_CTX_set(BN_RECP_CTX *recp,const BIGNUM *rdiv,BN_CTX *ctx);
-int	BN_mod_mul_reciprocal(BIGNUM *r, const BIGNUM *x, const BIGNUM *y,
-	BN_RECP_CTX *recp,BN_CTX *ctx);
-int	BN_mod_exp_recp(BIGNUM *r, const BIGNUM *a, const BIGNUM *p,
-	const BIGNUM *m, BN_CTX *ctx);
-int	BN_div_recp(BIGNUM *dv, BIGNUM *rem, const BIGNUM *m,
-	BN_RECP_CTX *recp, BN_CTX *ctx);
-
-/* Functions for arithmetic over binary polynomials represented by BIGNUMs. 
- *
- * The BIGNUM::neg property of BIGNUMs representing binary polynomials is
- * ignored.
- *
- * Note that input arguments are not const so that their bit arrays can
- * be expanded to the appropriate size if needed.
- */
-
-int	BN_GF2m_add(BIGNUM *r, const BIGNUM *a, const BIGNUM *b); /*r = a + b*/
-#define BN_GF2m_sub(r, a, b) BN_GF2m_add(r, a, b)
-int	BN_GF2m_mod(BIGNUM *r, const BIGNUM *a, const BIGNUM *p); /*r=a mod p*/
-int	BN_GF2m_mod_mul(BIGNUM *r, const BIGNUM *a, const BIGNUM *b,
-	const BIGNUM *p, BN_CTX *ctx); /* r = (a * b) mod p */
-int	BN_GF2m_mod_sqr(BIGNUM *r, const BIGNUM *a, const BIGNUM *p,
-	BN_CTX *ctx); /* r = (a * a) mod p */
-int	BN_GF2m_mod_inv(BIGNUM *r, const BIGNUM *b, const BIGNUM *p,
-	BN_CTX *ctx); /* r = (1 / b) mod p */
-int	BN_GF2m_mod_div(BIGNUM *r, const BIGNUM *a, const BIGNUM *b,
-	const BIGNUM *p, BN_CTX *ctx); /* r = (a / b) mod p */
-int	BN_GF2m_mod_exp(BIGNUM *r, const BIGNUM *a, const BIGNUM *b,
-	const BIGNUM *p, BN_CTX *ctx); /* r = (a ^ b) mod p */
-int	BN_GF2m_mod_sqrt(BIGNUM *r, const BIGNUM *a, const BIGNUM *p,
-	BN_CTX *ctx); /* r = sqrt(a) mod p */
-int	BN_GF2m_mod_solve_quad(BIGNUM *r, const BIGNUM *a, const BIGNUM *p,
-	BN_CTX *ctx); /* r^2 + r = a mod p */
-#define BN_GF2m_cmp(a, b) BN_ucmp((a), (b))
-/* Some functions allow for representation of the irreducible polynomials
- * as an unsigned int[], say p.  The irreducible f(t) is then of the form:
- *     t^p[0] + t^p[1] + ... + t^p[k]
- * where m = p[0] > p[1] > ... > p[k] = 0.
- */
-int	BN_GF2m_mod_arr(BIGNUM *r, const BIGNUM *a, const unsigned int p[]);
-	/* r = a mod p */
-int	BN_GF2m_mod_mul_arr(BIGNUM *r, const BIGNUM *a, const BIGNUM *b,
-	const unsigned int p[], BN_CTX *ctx); /* r = (a * b) mod p */
-int	BN_GF2m_mod_sqr_arr(BIGNUM *r, const BIGNUM *a, const unsigned int p[],
-	BN_CTX *ctx); /* r = (a * a) mod p */
-int	BN_GF2m_mod_inv_arr(BIGNUM *r, const BIGNUM *b, const unsigned int p[],
-	BN_CTX *ctx); /* r = (1 / b) mod p */
-int	BN_GF2m_mod_div_arr(BIGNUM *r, const BIGNUM *a, const BIGNUM *b,
-	const unsigned int p[], BN_CTX *ctx); /* r = (a / b) mod p */
-int	BN_GF2m_mod_exp_arr(BIGNUM *r, const BIGNUM *a, const BIGNUM *b,
-	const unsigned int p[], BN_CTX *ctx); /* r = (a ^ b) mod p */
-int	BN_GF2m_mod_sqrt_arr(BIGNUM *r, const BIGNUM *a,
-	const unsigned int p[], BN_CTX *ctx); /* r = sqrt(a) mod p */
-int	BN_GF2m_mod_solve_quad_arr(BIGNUM *r, const BIGNUM *a,
-	const unsigned int p[], BN_CTX *ctx); /* r^2 + r = a mod p */
-int	BN_GF2m_poly2arr(const BIGNUM *a, unsigned int p[], int max);
-int	BN_GF2m_arr2poly(const unsigned int p[], BIGNUM *a);
-
-/* faster mod functions for the 'NIST primes' 
- * 0 <= a < p^2 */
-int BN_nist_mod_192(BIGNUM *r, const BIGNUM *a, const BIGNUM *p, BN_CTX *ctx);
-int BN_nist_mod_224(BIGNUM *r, const BIGNUM *a, const BIGNUM *p, BN_CTX *ctx);
-int BN_nist_mod_256(BIGNUM *r, const BIGNUM *a, const BIGNUM *p, BN_CTX *ctx);
-int BN_nist_mod_384(BIGNUM *r, const BIGNUM *a, const BIGNUM *p, BN_CTX *ctx);
-int BN_nist_mod_521(BIGNUM *r, const BIGNUM *a, const BIGNUM *p, BN_CTX *ctx);
-
-const BIGNUM *BN_get0_nist_prime_192(void);
-const BIGNUM *BN_get0_nist_prime_224(void);
-const BIGNUM *BN_get0_nist_prime_256(void);
-const BIGNUM *BN_get0_nist_prime_384(void);
-const BIGNUM *BN_get0_nist_prime_521(void);
-
-/* library internal functions */
-
-#define bn_expand(a,bits) ((((((bits+BN_BITS2-1))/BN_BITS2)) <= (a)->dmax)?\
-	(a):bn_expand2((a),(bits+BN_BITS2-1)/BN_BITS2))
-#define bn_wexpand(a,words) (((words) <= (a)->dmax)?(a):bn_expand2((a),(words)))
-BIGNUM *bn_expand2(BIGNUM *a, int words);
-#ifndef OPENSSL_NO_DEPRECATED
-BIGNUM *bn_dup_expand(const BIGNUM *a, int words); /* unused */
-#endif
-
-/* Bignum consistency macros
- * There is one "API" macro, bn_fix_top(), for stripping leading zeroes from
- * bignum data after direct manipulations on the data. There is also an
- * "internal" macro, bn_check_top(), for verifying that there are no leading
- * zeroes. Unfortunately, some auditing is required due to the fact that
- * bn_fix_top() has become an overabused duct-tape because bignum data is
- * occasionally passed around in an inconsistent state. So the following
- * changes have been made to sort this out;
- * - bn_fix_top()s implementation has been moved to bn_correct_top()
- * - if BN_DEBUG isn't defined, bn_fix_top() maps to bn_correct_top(), and
- *   bn_check_top() is as before.
- * - if BN_DEBUG *is* defined;
- *   - bn_check_top() tries to pollute unused words even if the bignum 'top' is
- *     consistent. (ed: only if BN_DEBUG_RAND is defined)
- *   - bn_fix_top() maps to bn_check_top() rather than "fixing" anything.
- * The idea is to have debug builds flag up inconsistent bignums when they
- * occur. If that occurs in a bn_fix_top(), we examine the code in question; if
- * the use of bn_fix_top() was appropriate (ie. it follows directly after code
- * that manipulates the bignum) it is converted to bn_correct_top(), and if it
- * was not appropriate, we convert it permanently to bn_check_top() and track
- * down the cause of the bug. Eventually, no internal code should be using the
- * bn_fix_top() macro. External applications and libraries should try this with
- * their own code too, both in terms of building against the openssl headers
- * with BN_DEBUG defined *and* linking with a version of OpenSSL built with it
- * defined. This not only improves external code, it provides more test
- * coverage for openssl's own code.
- */
-
-#ifdef BN_DEBUG
-
-/* We only need assert() when debugging */
-#include <assert.h>
-
-#ifdef BN_DEBUG_RAND
-/* To avoid "make update" cvs wars due to BN_DEBUG, use some tricks */
-#ifndef RAND_pseudo_bytes
-int RAND_pseudo_bytes(unsigned char *buf,int num);
-#define BN_DEBUG_TRIX
-#endif
-#define bn_pollute(a) \
-	do { \
-		const BIGNUM *_bnum1 = (a); \
-		if(_bnum1->top < _bnum1->dmax) { \
-			unsigned char _tmp_char; \
-			/* We cast away const without the compiler knowing, any \
-			 * *genuinely* constant variables that aren't mutable \
-			 * wouldn't be constructed with top!=dmax. */ \
-			BN_ULONG *_not_const; \
-			memcpy(&_not_const, &_bnum1->d, sizeof(BN_ULONG*)); \
-			RAND_pseudo_bytes(&_tmp_char, 1); \
-			memset((unsigned char *)(_not_const + _bnum1->top), _tmp_char, \
-				(_bnum1->dmax - _bnum1->top) * sizeof(BN_ULONG)); \
-		} \
-	} while(0)
-#ifdef BN_DEBUG_TRIX
-#undef RAND_pseudo_bytes
-#endif
-#else
-#define bn_pollute(a)
-#endif
-#define bn_check_top(a) \
-	do { \
-		const BIGNUM *_bnum2 = (a); \
-		if (_bnum2 != NULL) { \
-			assert((_bnum2->top == 0) || \
-				(_bnum2->d[_bnum2->top - 1] != 0)); \
-			bn_pollute(_bnum2); \
-		} \
-	} while(0)
-
-#define bn_fix_top(a)		bn_check_top(a)
-
-#else /* !BN_DEBUG */
-
-#define bn_pollute(a)
-#define bn_check_top(a)
-#define bn_fix_top(a)		bn_correct_top(a)
-
-#endif
-
-#define bn_correct_top(a) \
-        { \
-        BN_ULONG *ftl; \
-	if ((a)->top > 0) \
-		{ \
-		for (ftl= &((a)->d[(a)->top-1]); (a)->top > 0; (a)->top--) \
-		if (*(ftl--)) break; \
-		} \
-	bn_pollute(a); \
-	}
-
-BN_ULONG bn_mul_add_words(BN_ULONG *rp, const BN_ULONG *ap, int num, BN_ULONG w);
-BN_ULONG bn_mul_words(BN_ULONG *rp, const BN_ULONG *ap, int num, BN_ULONG w);
-void     bn_sqr_words(BN_ULONG *rp, const BN_ULONG *ap, int num);
-BN_ULONG bn_div_words(BN_ULONG h, BN_ULONG l, BN_ULONG d);
-BN_ULONG bn_add_words(BN_ULONG *rp, const BN_ULONG *ap, const BN_ULONG *bp,int num);
-BN_ULONG bn_sub_words(BN_ULONG *rp, const BN_ULONG *ap, const BN_ULONG *bp,int num);
-
-/* Primes from RFC 2409 */
-BIGNUM *get_rfc2409_prime_768(BIGNUM *bn);
-BIGNUM *get_rfc2409_prime_1024(BIGNUM *bn);
-
-/* Primes from RFC 3526 */
-BIGNUM *get_rfc3526_prime_1536(BIGNUM *bn);
-BIGNUM *get_rfc3526_prime_2048(BIGNUM *bn);
-BIGNUM *get_rfc3526_prime_3072(BIGNUM *bn);
-BIGNUM *get_rfc3526_prime_4096(BIGNUM *bn);
-BIGNUM *get_rfc3526_prime_6144(BIGNUM *bn);
-BIGNUM *get_rfc3526_prime_8192(BIGNUM *bn);
-
-int BN_bntest_rand(BIGNUM *rnd, int bits, int top,int bottom);
-
-/* BEGIN ERROR CODES */
-/* The following lines are auto generated by the script mkerr.pl. Any changes
- * made after this point may be overwritten when the script is next run.
- */
-void ERR_load_BN_strings(void);
-
-/* Error codes for the BN functions. */
-
-/* Function codes. */
-#define BN_F_BNRAND					 127
-#define BN_F_BN_BLINDING_CONVERT_EX			 100
-#define BN_F_BN_BLINDING_CREATE_PARAM			 128
-#define BN_F_BN_BLINDING_INVERT_EX			 101
-#define BN_F_BN_BLINDING_NEW				 102
-#define BN_F_BN_BLINDING_UPDATE				 103
-#define BN_F_BN_BN2DEC					 104
-#define BN_F_BN_BN2HEX					 105
-#define BN_F_BN_CTX_GET					 116
-#define BN_F_BN_CTX_NEW					 106
-#define BN_F_BN_CTX_START				 129
-#define BN_F_BN_DIV					 107
-#define BN_F_BN_DIV_RECP				 130
-#define BN_F_BN_EXP					 123
-#define BN_F_BN_EXPAND2					 108
-#define BN_F_BN_EXPAND_INTERNAL				 120
-#define BN_F_BN_GF2M_MOD				 131
-#define BN_F_BN_GF2M_MOD_EXP				 132
-#define BN_F_BN_GF2M_MOD_MUL				 133
-#define BN_F_BN_GF2M_MOD_SOLVE_QUAD			 134
-#define BN_F_BN_GF2M_MOD_SOLVE_QUAD_ARR			 135
-#define BN_F_BN_GF2M_MOD_SQR				 136
-#define BN_F_BN_GF2M_MOD_SQRT				 137
-#define BN_F_BN_MOD_EXP2_MONT				 118
-#define BN_F_BN_MOD_EXP_MONT				 109
-#define BN_F_BN_MOD_EXP_MONT_CONSTTIME			 124
-#define BN_F_BN_MOD_EXP_MONT_WORD			 117
-#define BN_F_BN_MOD_EXP_RECP				 125
-#define BN_F_BN_MOD_EXP_SIMPLE				 126
-#define BN_F_BN_MOD_INVERSE				 110
-#define BN_F_BN_MOD_LSHIFT_QUICK			 119
-#define BN_F_BN_MOD_MUL_RECIPROCAL			 111
-#define BN_F_BN_MOD_SQRT				 121
-#define BN_F_BN_MPI2BN					 112
-#define BN_F_BN_NEW					 113
-#define BN_F_BN_RAND					 114
-#define BN_F_BN_RAND_RANGE				 122
-#define BN_F_BN_USUB					 115
-
-/* Reason codes. */
-#define BN_R_ARG2_LT_ARG3				 100
-#define BN_R_BAD_RECIPROCAL				 101
-#define BN_R_BIGNUM_TOO_LONG				 114
-#define BN_R_CALLED_WITH_EVEN_MODULUS			 102
-#define BN_R_DIV_BY_ZERO				 103
-#define BN_R_ENCODING_ERROR				 104
-#define BN_R_EXPAND_ON_STATIC_BIGNUM_DATA		 105
-#define BN_R_INPUT_NOT_REDUCED				 110
-#define BN_R_INVALID_LENGTH				 106
-#define BN_R_INVALID_RANGE				 115
-#define BN_R_NOT_A_SQUARE				 111
-#define BN_R_NOT_INITIALIZED				 107
-#define BN_R_NO_INVERSE					 108
-#define BN_R_NO_SOLUTION				 116
-#define BN_R_P_IS_NOT_PRIME				 112
-#define BN_R_TOO_MANY_ITERATIONS			 113
-#define BN_R_TOO_MANY_TEMPORARY_VARIABLES		 109
-
-#ifdef  __cplusplus
-}
-#endif
-#endif
diff --git a/crypto/openssl/crypto/bn/bn.mul b/crypto/openssl/crypto/bn/bn.mul
deleted file mode 100644
index 9728870d38ae..000000000000
--- a/crypto/openssl/crypto/bn/bn.mul
+++ /dev/null
@@ -1,19 +0,0 @@
-We need
-
-* bn_mul_comba8
-* bn_mul_comba4
-* bn_mul_normal
-* bn_mul_recursive
-
-* bn_sqr_comba8
-* bn_sqr_comba4
-bn_sqr_normal -> BN_sqr
-* bn_sqr_recursive
-
-* bn_mul_low_recursive
-* bn_mul_low_normal
-* bn_mul_high
-
-* bn_mul_part_recursive	# symetric but not power of 2
-
-bn_mul_asymetric_recursive # uneven, but do the chop up.
diff --git a/crypto/openssl/crypto/bn/bn_add.c b/crypto/openssl/crypto/bn/bn_add.c
deleted file mode 100644
index 9405163706aa..000000000000
--- a/crypto/openssl/crypto/bn/bn_add.c
+++ /dev/null
@@ -1,313 +0,0 @@
-/* crypto/bn/bn_add.c */
-/* Copyright (C) 1995-1998 Eric Young (eay@cryptsoft.com)
- * All rights reserved.
- *
- * This package is an SSL implementation written
- * by Eric Young (eay@cryptsoft.com).
- * The implementation was written so as to conform with Netscapes SSL.
- * 
- * This library is free for commercial and non-commercial use as long as
- * the following conditions are aheared to.  The following conditions
- * apply to all code found in this distribution, be it the RC4, RSA,
- * lhash, DES, etc., code; not just the SSL code.  The SSL documentation
- * included with this distribution is covered by the same copyright terms
- * except that the holder is Tim Hudson (tjh@cryptsoft.com).
- * 
- * Copyright remains Eric Young's, and as such any Copyright notices in
- * the code are not to be removed.
- * If this package is used in a product, Eric Young should be given attribution
- * as the author of the parts of the library used.
- * This can be in the form of a textual message at program startup or
- * in documentation (online or textual) provided with the package.
- * 
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions
- * are met:
- * 1. Redistributions of source code must retain the copyright
- *    notice, this list of conditions and the following disclaimer.
- * 2. Redistributions in binary form must reproduce the above copyright
- *    notice, this list of conditions and the following disclaimer in the
- *    documentation and/or other materials provided with the distribution.
- * 3. All advertising materials mentioning features or use of this software
- *    must display the following acknowledgement:
- *    "This product includes cryptographic software written by
- *     Eric Young (eay@cryptsoft.com)"
- *    The word 'cryptographic' can be left out if the rouines from the library
- *    being used are not cryptographic related :-).
- * 4. If you include any Windows specific code (or a derivative thereof) from 
- *    the apps directory (application code) you must include an acknowledgement:
- *    "This product includes software written by Tim Hudson (tjh@cryptsoft.com)"
- * 
- * THIS SOFTWARE IS PROVIDED BY ERIC YOUNG ``AS IS'' AND
- * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
- * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
- * ARE DISCLAIMED.  IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE
- * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
- * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
- * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
- * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
- * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
- * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
- * SUCH DAMAGE.
- * 
- * The licence and distribution terms for any publically available version or
- * derivative of this code cannot be changed.  i.e. this code cannot simply be
- * copied and put under another distribution licence
- * [including the GNU Public Licence.]
- */
-
-#include <stdio.h>
-#include "cryptlib.h"
-#include "bn_lcl.h"
-
-/* r can == a or b */
-int BN_add(BIGNUM *r, const BIGNUM *a, const BIGNUM *b)
-	{
-	const BIGNUM *tmp;
-	int a_neg = a->neg, ret;
-
-	bn_check_top(a);
-	bn_check_top(b);
-
-	/*  a +  b	a+b
-	 *  a + -b	a-b
-	 * -a +  b	b-a
-	 * -a + -b	-(a+b)
-	 */
-	if (a_neg ^ b->neg)
-		{
-		/* only one is negative */
-		if (a_neg)
-			{ tmp=a; a=b; b=tmp; }
-
-		/* we are now a - b */
-
-		if (BN_ucmp(a,b) < 0)
-			{
-			if (!BN_usub(r,b,a)) return(0);
-			r->neg=1;
-			}
-		else
-			{
-			if (!BN_usub(r,a,b)) return(0);
-			r->neg=0;
-			}
-		return(1);
-		}
-
-	ret = BN_uadd(r,a,b);
-	r->neg = a_neg;
-	bn_check_top(r);
-	return ret;
-	}
-
-/* unsigned add of b to a */
-int BN_uadd(BIGNUM *r, const BIGNUM *a, const BIGNUM *b)
-	{
-	int max,min,dif;
-	BN_ULONG *ap,*bp,*rp,carry,t1,t2;
-	const BIGNUM *tmp;
-
-	bn_check_top(a);
-	bn_check_top(b);
-
-	if (a->top < b->top)
-		{ tmp=a; a=b; b=tmp; }
-	max = a->top;
-	min = b->top;
-	dif = max - min;
-
-	if (bn_wexpand(r,max+1) == NULL)
-		return 0;
-
-	r->top=max;
-
-
-	ap=a->d;
-	bp=b->d;
-	rp=r->d;
-
-	carry=bn_add_words(rp,ap,bp,min);
-	rp+=min;
-	ap+=min;
-	bp+=min;
-
-	if (carry)
-		{
-		while (dif)
-			{
-			dif--;
-			t1 = *(ap++);
-			t2 = (t1+1) & BN_MASK2;
-			*(rp++) = t2;
-			if (t2)
-				{
-				carry=0;
-				break;
-				}
-			}
-		if (carry)
-			{
-			/* carry != 0 => dif == 0 */
-			*rp = 1;
-			r->top++;
-			}
-		}
-	if (dif && rp != ap)
-		while (dif--)
-			/* copy remaining words if ap != rp */
-			*(rp++) = *(ap++);
-	r->neg = 0;
-	bn_check_top(r);
-	return 1;
-	}
-
-/* unsigned subtraction of b from a, a must be larger than b. */
-int BN_usub(BIGNUM *r, const BIGNUM *a, const BIGNUM *b)
-	{
-	int max,min,dif;
-	register BN_ULONG t1,t2,*ap,*bp,*rp;
-	int i,carry;
-#if defined(IRIX_CC_BUG) && !defined(LINT)
-	int dummy;
-#endif
-
-	bn_check_top(a);
-	bn_check_top(b);
-
-	max = a->top;
-	min = b->top;
-	dif = max - min;
-
-	if (dif < 0)	/* hmm... should not be happening */
-		{
-		BNerr(BN_F_BN_USUB,BN_R_ARG2_LT_ARG3);
-		return(0);
-		}
-
-	if (bn_wexpand(r,max) == NULL) return(0);
-
-	ap=a->d;
-	bp=b->d;
-	rp=r->d;
-
-#if 1
-	carry=0;
-	for (i = min; i != 0; i--)
-		{
-		t1= *(ap++);
-		t2= *(bp++);
-		if (carry)
-			{
-			carry=(t1 <= t2);
-			t1=(t1-t2-1)&BN_MASK2;
-			}
-		else
-			{
-			carry=(t1 < t2);
-			t1=(t1-t2)&BN_MASK2;
-			}
-#if defined(IRIX_CC_BUG) && !defined(LINT)
-		dummy=t1;
-#endif
-		*(rp++)=t1&BN_MASK2;
-		}
-#else
-	carry=bn_sub_words(rp,ap,bp,min);
-	ap+=min;
-	bp+=min;
-	rp+=min;
-#endif
-	if (carry) /* subtracted */
-		{
-		if (!dif)
-			/* error: a < b */
-			return 0;
-		while (dif)
-			{
-			dif--;
-			t1 = *(ap++);
-			t2 = (t1-1)&BN_MASK2;
-			*(rp++) = t2;
-			if (t1)
-				break;
-			}
-		}
-#if 0
-	memcpy(rp,ap,sizeof(*rp)*(max-i));
-#else
-	if (rp != ap)
-		{
-		for (;;)
-			{
-			if (!dif--) break;
-			rp[0]=ap[0];
-			if (!dif--) break;
-			rp[1]=ap[1];
-			if (!dif--) break;
-			rp[2]=ap[2];
-			if (!dif--) break;
-			rp[3]=ap[3];
-			rp+=4;
-			ap+=4;
-			}
-		}
-#endif
-
-	r->top=max;
-	r->neg=0;
-	bn_correct_top(r);
-	return(1);
-	}
-
-int BN_sub(BIGNUM *r, const BIGNUM *a, const BIGNUM *b)
-	{
-	int max;
-	int add=0,neg=0;
-	const BIGNUM *tmp;
-
-	bn_check_top(a);
-	bn_check_top(b);
-
-	/*  a -  b	a-b
-	 *  a - -b	a+b
-	 * -a -  b	-(a+b)
-	 * -a - -b	b-a
-	 */
-	if (a->neg)
-		{
-		if (b->neg)
-			{ tmp=a; a=b; b=tmp; }
-		else
-			{ add=1; neg=1; }
-		}
-	else
-		{
-		if (b->neg) { add=1; neg=0; }
-		}
-
-	if (add)
-		{
-		if (!BN_uadd(r,a,b)) return(0);
-		r->neg=neg;
-		return(1);
-		}
-
-	/* We are actually doing a - b :-) */
-
-	max=(a->top > b->top)?a->top:b->top;
-	if (bn_wexpand(r,max) == NULL) return(0);
-	if (BN_ucmp(a,b) < 0)
-		{
-		if (!BN_usub(r,b,a)) return(0);
-		r->neg=1;
-		}
-	else
-		{
-		if (!BN_usub(r,a,b)) return(0);
-		r->neg=0;
-		}
-	bn_check_top(r);
-	return(1);
-	}
-
diff --git a/crypto/openssl/crypto/bn/bn_asm.c b/crypto/openssl/crypto/bn/bn_asm.c
deleted file mode 100644
index 99bc2de4913e..000000000000
--- a/crypto/openssl/crypto/bn/bn_asm.c
+++ /dev/null
@@ -1,860 +0,0 @@
-/* crypto/bn/bn_asm.c */
-/* Copyright (C) 1995-1998 Eric Young (eay@cryptsoft.com)
- * All rights reserved.
- *
- * This package is an SSL implementation written
- * by Eric Young (eay@cryptsoft.com).
- * The implementation was written so as to conform with Netscapes SSL.
- * 
- * This library is free for commercial and non-commercial use as long as
- * the following conditions are aheared to.  The following conditions
- * apply to all code found in this distribution, be it the RC4, RSA,
- * lhash, DES, etc., code; not just the SSL code.  The SSL documentation
- * included with this distribution is covered by the same copyright terms
- * except that the holder is Tim Hudson (tjh@cryptsoft.com).
- * 
- * Copyright remains Eric Young's, and as such any Copyright notices in
- * the code are not to be removed.
- * If this package is used in a product, Eric Young should be given attribution
- * as the author of the parts of the library used.
- * This can be in the form of a textual message at program startup or
- * in documentation (online or textual) provided with the package.
- * 
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions
- * are met:
- * 1. Redistributions of source code must retain the copyright
- *    notice, this list of conditions and the following disclaimer.
- * 2. Redistributions in binary form must reproduce the above copyright
- *    notice, this list of conditions and the following disclaimer in the
- *    documentation and/or other materials provided with the distribution.
- * 3. All advertising materials mentioning features or use of this software
- *    must display the following acknowledgement:
- *    "This product includes cryptographic software written by
- *     Eric Young (eay@cryptsoft.com)"
- *    The word 'cryptographic' can be left out if the rouines from the library
- *    being used are not cryptographic related :-).
- * 4. If you include any Windows specific code (or a derivative thereof) from 
- *    the apps directory (application code) you must include an acknowledgement:
- *    "This product includes software written by Tim Hudson (tjh@cryptsoft.com)"
- * 
- * THIS SOFTWARE IS PROVIDED BY ERIC YOUNG ``AS IS'' AND
- * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
- * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
- * ARE DISCLAIMED.  IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE
- * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
- * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
- * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
- * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
- * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
- * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
- * SUCH DAMAGE.
- * 
- * The licence and distribution terms for any publically available version or
- * derivative of this code cannot be changed.  i.e. this code cannot simply be
- * copied and put under another distribution licence
- * [including the GNU Public Licence.]
- */
-
-#ifndef BN_DEBUG
-# undef NDEBUG /* avoid conflicting definitions */
-# define NDEBUG
-#endif
-
-#include <stdio.h>
-#include <assert.h>
-#include "cryptlib.h"
-#include "bn_lcl.h"
-
-#if defined(BN_LLONG) || defined(BN_UMULT_HIGH)
-
-BN_ULONG bn_mul_add_words(BN_ULONG *rp, const BN_ULONG *ap, int num, BN_ULONG w)
-	{
-	BN_ULONG c1=0;
-
-	assert(num >= 0);
-	if (num <= 0) return(c1);
-
-	while (num&~3)
-		{
-		mul_add(rp[0],ap[0],w,c1);
-		mul_add(rp[1],ap[1],w,c1);
-		mul_add(rp[2],ap[2],w,c1);
-		mul_add(rp[3],ap[3],w,c1);
-		ap+=4; rp+=4; num-=4;
-		}
-	if (num)
-		{
-		mul_add(rp[0],ap[0],w,c1); if (--num==0) return c1;
-		mul_add(rp[1],ap[1],w,c1); if (--num==0) return c1;
-		mul_add(rp[2],ap[2],w,c1); return c1;
-		}
-	
-	return(c1);
-	} 
-
-BN_ULONG bn_mul_words(BN_ULONG *rp, const BN_ULONG *ap, int num, BN_ULONG w)
-	{
-	BN_ULONG c1=0;
-
-	assert(num >= 0);
-	if (num <= 0) return(c1);
-
-	while (num&~3)
-		{
-		mul(rp[0],ap[0],w,c1);
-		mul(rp[1],ap[1],w,c1);
-		mul(rp[2],ap[2],w,c1);
-		mul(rp[3],ap[3],w,c1);
-		ap+=4; rp+=4; num-=4;
-		}
-	if (num)
-		{
-		mul(rp[0],ap[0],w,c1); if (--num == 0) return c1;
-		mul(rp[1],ap[1],w,c1); if (--num == 0) return c1;
-		mul(rp[2],ap[2],w,c1);
-		}
-	return(c1);
-	} 
-
-void bn_sqr_words(BN_ULONG *r, const BN_ULONG *a, int n)
-        {
-	assert(n >= 0);
-	if (n <= 0) return;
-	while (n&~3)
-		{
-		sqr(r[0],r[1],a[0]);
-		sqr(r[2],r[3],a[1]);
-		sqr(r[4],r[5],a[2]);
-		sqr(r[6],r[7],a[3]);
-		a+=4; r+=8; n-=4;
-		}
-	if (n)
-		{
-		sqr(r[0],r[1],a[0]); if (--n == 0) return;
-		sqr(r[2],r[3],a[1]); if (--n == 0) return;
-		sqr(r[4],r[5],a[2]);
-		}
-	}
-
-#else /* !(defined(BN_LLONG) || defined(BN_UMULT_HIGH)) */
-
-BN_ULONG bn_mul_add_words(BN_ULONG *rp, const BN_ULONG *ap, int num, BN_ULONG w)
-	{
-	BN_ULONG c=0;
-	BN_ULONG bl,bh;
-
-	assert(num >= 0);
-	if (num <= 0) return((BN_ULONG)0);
-
-	bl=LBITS(w);
-	bh=HBITS(w);
-
-	for (;;)
-		{
-		mul_add(rp[0],ap[0],bl,bh,c);
-		if (--num == 0) break;
-		mul_add(rp[1],ap[1],bl,bh,c);
-		if (--num == 0) break;
-		mul_add(rp[2],ap[2],bl,bh,c);
-		if (--num == 0) break;
-		mul_add(rp[3],ap[3],bl,bh,c);
-		if (--num == 0) break;
-		ap+=4;
-		rp+=4;
-		}
-	return(c);
-	} 
-
-BN_ULONG bn_mul_words(BN_ULONG *rp, const BN_ULONG *ap, int num, BN_ULONG w)
-	{
-	BN_ULONG carry=0;
-	BN_ULONG bl,bh;
-
-	assert(num >= 0);
-	if (num <= 0) return((BN_ULONG)0);
-
-	bl=LBITS(w);
-	bh=HBITS(w);
-
-	for (;;)
-		{
-		mul(rp[0],ap[0],bl,bh,carry);
-		if (--num == 0) break;
-		mul(rp[1],ap[1],bl,bh,carry);
-		if (--num == 0) break;
-		mul(rp[2],ap[2],bl,bh,carry);
-		if (--num == 0) break;
-		mul(rp[3],ap[3],bl,bh,carry);
-		if (--num == 0) break;
-		ap+=4;
-		rp+=4;
-		}
-	return(carry);
-	} 
-
-void bn_sqr_words(BN_ULONG *r, const BN_ULONG *a, int n)
-        {
-	assert(n >= 0);
-	if (n <= 0) return;
-	for (;;)
-		{
-		sqr64(r[0],r[1],a[0]);
-		if (--n == 0) break;
-
-		sqr64(r[2],r[3],a[1]);
-		if (--n == 0) break;
-
-		sqr64(r[4],r[5],a[2]);
-		if (--n == 0) break;
-
-		sqr64(r[6],r[7],a[3]);
-		if (--n == 0) break;
-
-		a+=4;
-		r+=8;
-		}
-	}
-
-#endif /* !(defined(BN_LLONG) || defined(BN_UMULT_HIGH)) */
-
-#if defined(BN_LLONG) && defined(BN_DIV2W)
-
-BN_ULONG bn_div_words(BN_ULONG h, BN_ULONG l, BN_ULONG d)
-	{
-	return((BN_ULONG)(((((BN_ULLONG)h)<<BN_BITS2)|l)/(BN_ULLONG)d));
-	}
-
-#else
-
-/* Divide h,l by d and return the result. */
-/* I need to test this some more :-( */
-BN_ULONG bn_div_words(BN_ULONG h, BN_ULONG l, BN_ULONG d)
-	{
-	BN_ULONG dh,dl,q,ret=0,th,tl,t;
-	int i,count=2;
-
-	if (d == 0) return(BN_MASK2);
-
-	i=BN_num_bits_word(d);
-	assert((i == BN_BITS2) || (h <= (BN_ULONG)1<<i));
-
-	i=BN_BITS2-i;
-	if (h >= d) h-=d;
-
-	if (i)
-		{
-		d<<=i;
-		h=(h<<i)|(l>>(BN_BITS2-i));
-		l<<=i;
-		}
-	dh=(d&BN_MASK2h)>>BN_BITS4;
-	dl=(d&BN_MASK2l);
-	for (;;)
-		{
-		if ((h>>BN_BITS4) == dh)
-			q=BN_MASK2l;
-		else
-			q=h/dh;
-
-		th=q*dh;
-		tl=dl*q;
-		for (;;)
-			{
-			t=h-th;
-			if ((t&BN_MASK2h) ||
-				((tl) <= (
-					(t<<BN_BITS4)|
-					((l&BN_MASK2h)>>BN_BITS4))))
-				break;
-			q--;
-			th-=dh;
-			tl-=dl;
-			}
-		t=(tl>>BN_BITS4);
-		tl=(tl<<BN_BITS4)&BN_MASK2h;
-		th+=t;
-
-		if (l < tl) th++;
-		l-=tl;
-		if (h < th)
-			{
-			h+=d;
-			q--;
-			}
-		h-=th;
-
-		if (--count == 0) break;
-
-		ret=q<<BN_BITS4;
-		h=((h<<BN_BITS4)|(l>>BN_BITS4))&BN_MASK2;
-		l=(l&BN_MASK2l)<<BN_BITS4;
-		}
-	ret|=q;
-	return(ret);
-	}
-#endif /* !defined(BN_LLONG) && defined(BN_DIV2W) */
-
-#ifdef BN_LLONG
-BN_ULONG bn_add_words(BN_ULONG *r, const BN_ULONG *a, const BN_ULONG *b, int n)
-        {
-	BN_ULLONG ll=0;
-
-	assert(n >= 0);
-	if (n <= 0) return((BN_ULONG)0);
-
-	for (;;)
-		{
-		ll+=(BN_ULLONG)a[0]+b[0];
-		r[0]=(BN_ULONG)ll&BN_MASK2;
-		ll>>=BN_BITS2;
-		if (--n <= 0) break;
-
-		ll+=(BN_ULLONG)a[1]+b[1];
-		r[1]=(BN_ULONG)ll&BN_MASK2;
-		ll>>=BN_BITS2;
-		if (--n <= 0) break;
-
-		ll+=(BN_ULLONG)a[2]+b[2];
-		r[2]=(BN_ULONG)ll&BN_MASK2;
-		ll>>=BN_BITS2;
-		if (--n <= 0) break;
-
-		ll+=(BN_ULLONG)a[3]+b[3];
-		r[3]=(BN_ULONG)ll&BN_MASK2;
-		ll>>=BN_BITS2;
-		if (--n <= 0) break;
-
-		a+=4;
-		b+=4;
-		r+=4;
-		}
-	return((BN_ULONG)ll);
-	}
-#else /* !BN_LLONG */
-BN_ULONG bn_add_words(BN_ULONG *r, const BN_ULONG *a, const BN_ULONG *b, int n)
-        {
-	BN_ULONG c,l,t;
-
-	assert(n >= 0);
-	if (n <= 0) return((BN_ULONG)0);
-
-	c=0;
-	for (;;)
-		{
-		t=a[0];
-		t=(t+c)&BN_MASK2;
-		c=(t < c);
-		l=(t+b[0])&BN_MASK2;
-		c+=(l < t);
-		r[0]=l;
-		if (--n <= 0) break;
-
-		t=a[1];
-		t=(t+c)&BN_MASK2;
-		c=(t < c);
-		l=(t+b[1])&BN_MASK2;
-		c+=(l < t);
-		r[1]=l;
-		if (--n <= 0) break;
-
-		t=a[2];
-		t=(t+c)&BN_MASK2;
-		c=(t < c);
-		l=(t+b[2])&BN_MASK2;
-		c+=(l < t);
-		r[2]=l;
-		if (--n <= 0) break;
-
-		t=a[3];
-		t=(t+c)&BN_MASK2;
-		c=(t < c);
-		l=(t+b[3])&BN_MASK2;
-		c+=(l < t);
-		r[3]=l;
-		if (--n <= 0) break;
-
-		a+=4;
-		b+=4;
-		r+=4;
-		}
-	return((BN_ULONG)c);
-	}
-#endif /* !BN_LLONG */
-
-BN_ULONG bn_sub_words(BN_ULONG *r, const BN_ULONG *a, const BN_ULONG *b, int n)
-        {
-	BN_ULONG t1,t2;
-	int c=0;
-
-	assert(n >= 0);
-	if (n <= 0) return((BN_ULONG)0);
-
-	for (;;)
-		{
-		t1=a[0]; t2=b[0];
-		r[0]=(t1-t2-c)&BN_MASK2;
-		if (t1 != t2) c=(t1 < t2);
-		if (--n <= 0) break;
-
-		t1=a[1]; t2=b[1];
-		r[1]=(t1-t2-c)&BN_MASK2;
-		if (t1 != t2) c=(t1 < t2);
-		if (--n <= 0) break;
-
-		t1=a[2]; t2=b[2];
-		r[2]=(t1-t2-c)&BN_MASK2;
-		if (t1 != t2) c=(t1 < t2);
-		if (--n <= 0) break;
-
-		t1=a[3]; t2=b[3];
-		r[3]=(t1-t2-c)&BN_MASK2;
-		if (t1 != t2) c=(t1 < t2);
-		if (--n <= 0) break;
-
-		a+=4;
-		b+=4;
-		r+=4;
-		}
-	return(c);
-	}
-
-#ifdef BN_MUL_COMBA
-
-#undef bn_mul_comba8
-#undef bn_mul_comba4
-#undef bn_sqr_comba8
-#undef bn_sqr_comba4
-
-/* mul_add_c(a,b,c0,c1,c2)  -- c+=a*b for three word number c=(c2,c1,c0) */
-/* mul_add_c2(a,b,c0,c1,c2) -- c+=2*a*b for three word number c=(c2,c1,c0) */
-/* sqr_add_c(a,i,c0,c1,c2)  -- c+=a[i]^2 for three word number c=(c2,c1,c0) */
-/* sqr_add_c2(a,i,c0,c1,c2) -- c+=2*a[i]*a[j] for three word number c=(c2,c1,c0) */
-
-#ifdef BN_LLONG
-#define mul_add_c(a,b,c0,c1,c2) \
-	t=(BN_ULLONG)a*b; \
-	t1=(BN_ULONG)Lw(t); \
-	t2=(BN_ULONG)Hw(t); \
-	c0=(c0+t1)&BN_MASK2; if ((c0) < t1) t2++; \
-	c1=(c1+t2)&BN_MASK2; if ((c1) < t2) c2++;
-
-#define mul_add_c2(a,b,c0,c1,c2) \
-	t=(BN_ULLONG)a*b; \
-	tt=(t+t)&BN_MASK; \
-	if (tt < t) c2++; \
-	t1=(BN_ULONG)Lw(tt); \
-	t2=(BN_ULONG)Hw(tt); \
-	c0=(c0+t1)&BN_MASK2;  \
-	if ((c0 < t1) && (((++t2)&BN_MASK2) == 0)) c2++; \
-	c1=(c1+t2)&BN_MASK2; if ((c1) < t2) c2++;
-
-#define sqr_add_c(a,i,c0,c1,c2) \
-	t=(BN_ULLONG)a[i]*a[i]; \
-	t1=(BN_ULONG)Lw(t); \
-	t2=(BN_ULONG)Hw(t); \
-	c0=(c0+t1)&BN_MASK2; if ((c0) < t1) t2++; \
-	c1=(c1+t2)&BN_MASK2; if ((c1) < t2) c2++;
-
-#define sqr_add_c2(a,i,j,c0,c1,c2) \
-	mul_add_c2((a)[i],(a)[j],c0,c1,c2)
-
-#elif defined(BN_UMULT_LOHI)
-
-#define mul_add_c(a,b,c0,c1,c2)	{	\
-	BN_ULONG ta=(a),tb=(b);		\
-	BN_UMULT_LOHI(t1,t2,ta,tb);	\
-	c0 += t1; t2 += (c0<t1)?1:0;	\
-	c1 += t2; c2 += (c1<t2)?1:0;	\
-	}
-
-#define mul_add_c2(a,b,c0,c1,c2) {	\
-	BN_ULONG ta=(a),tb=(b),t0;	\
-	BN_UMULT_LOHI(t0,t1,ta,tb);	\
-	t2 = t1+t1; c2 += (t2<t1)?1:0;	\
-	t1 = t0+t0; t2 += (t1<t0)?1:0;	\
-	c0 += t1; t2 += (c0<t1)?1:0;	\
-	c1 += t2; c2 += (c1<t2)?1:0;	\
-	}
-
-#define sqr_add_c(a,i,c0,c1,c2)	{	\
-	BN_ULONG ta=(a)[i];		\
-	BN_UMULT_LOHI(t1,t2,ta,ta);	\
-	c0 += t1; t2 += (c0<t1)?1:0;	\
-	c1 += t2; c2 += (c1<t2)?1:0;	\
-	}
-
-#define sqr_add_c2(a,i,j,c0,c1,c2)	\
-	mul_add_c2((a)[i],(a)[j],c0,c1,c2)
-
-#elif defined(BN_UMULT_HIGH)
-
-#define mul_add_c(a,b,c0,c1,c2)	{	\
-	BN_ULONG ta=(a),tb=(b);		\
-	t1 = ta * tb;			\
-	t2 = BN_UMULT_HIGH(ta,tb);	\
-	c0 += t1; t2 += (c0<t1)?1:0;	\
-	c1 += t2; c2 += (c1<t2)?1:0;	\
-	}
-
-#define mul_add_c2(a,b,c0,c1,c2) {	\
-	BN_ULONG ta=(a),tb=(b),t0;	\
-	t1 = BN_UMULT_HIGH(ta,tb);	\
-	t0 = ta * tb;			\
-	t2 = t1+t1; c2 += (t2<t1)?1:0;	\
-	t1 = t0+t0; t2 += (t1<t0)?1:0;	\
-	c0 += t1; t2 += (c0<t1)?1:0;	\
-	c1 += t2; c2 += (c1<t2)?1:0;	\
-	}
-
-#define sqr_add_c(a,i,c0,c1,c2)	{	\
-	BN_ULONG ta=(a)[i];		\
-	t1 = ta * ta;			\
-	t2 = BN_UMULT_HIGH(ta,ta);	\
-	c0 += t1; t2 += (c0<t1)?1:0;	\
-	c1 += t2; c2 += (c1<t2)?1:0;	\
-	}
-
-#define sqr_add_c2(a,i,j,c0,c1,c2)	\
-	mul_add_c2((a)[i],(a)[j],c0,c1,c2)
-
-#else /* !BN_LLONG */
-#define mul_add_c(a,b,c0,c1,c2) \
-	t1=LBITS(a); t2=HBITS(a); \
-	bl=LBITS(b); bh=HBITS(b); \
-	mul64(t1,t2,bl,bh); \
-	c0=(c0+t1)&BN_MASK2; if ((c0) < t1) t2++; \
-	c1=(c1+t2)&BN_MASK2; if ((c1) < t2) c2++;
-
-#define mul_add_c2(a,b,c0,c1,c2) \
-	t1=LBITS(a); t2=HBITS(a); \
-	bl=LBITS(b); bh=HBITS(b); \
-	mul64(t1,t2,bl,bh); \
-	if (t2 & BN_TBIT) c2++; \
-	t2=(t2+t2)&BN_MASK2; \
-	if (t1 & BN_TBIT) t2++; \
-	t1=(t1+t1)&BN_MASK2; \
-	c0=(c0+t1)&BN_MASK2;  \
-	if ((c0 < t1) && (((++t2)&BN_MASK2) == 0)) c2++; \
-	c1=(c1+t2)&BN_MASK2; if ((c1) < t2) c2++;
-
-#define sqr_add_c(a,i,c0,c1,c2) \
-	sqr64(t1,t2,(a)[i]); \
-	c0=(c0+t1)&BN_MASK2; if ((c0) < t1) t2++; \
-	c1=(c1+t2)&BN_MASK2; if ((c1) < t2) c2++;
-
-#define sqr_add_c2(a,i,j,c0,c1,c2) \
-	mul_add_c2((a)[i],(a)[j],c0,c1,c2)
-#endif /* !BN_LLONG */
-
-void bn_mul_comba8(BN_ULONG *r, BN_ULONG *a, BN_ULONG *b)
-	{
-#ifdef BN_LLONG
-	BN_ULLONG t;
-#else
-	BN_ULONG bl,bh;
-#endif
-	BN_ULONG t1,t2;
-	BN_ULONG c1,c2,c3;
-
-	c1=0;
-	c2=0;
-	c3=0;
-	mul_add_c(a[0],b[0],c1,c2,c3);
-	r[0]=c1;
-	c1=0;
-	mul_add_c(a[0],b[1],c2,c3,c1);
-	mul_add_c(a[1],b[0],c2,c3,c1);
-	r[1]=c2;
-	c2=0;
-	mul_add_c(a[2],b[0],c3,c1,c2);
-	mul_add_c(a[1],b[1],c3,c1,c2);
-	mul_add_c(a[0],b[2],c3,c1,c2);
-	r[2]=c3;
-	c3=0;
-	mul_add_c(a[0],b[3],c1,c2,c3);
-	mul_add_c(a[1],b[2],c1,c2,c3);
-	mul_add_c(a[2],b[1],c1,c2,c3);
-	mul_add_c(a[3],b[0],c1,c2,c3);
-	r[3]=c1;
-	c1=0;
-	mul_add_c(a[4],b[0],c2,c3,c1);
-	mul_add_c(a[3],b[1],c2,c3,c1);
-	mul_add_c(a[2],b[2],c2,c3,c1);
-	mul_add_c(a[1],b[3],c2,c3,c1);
-	mul_add_c(a[0],b[4],c2,c3,c1);
-	r[4]=c2;
-	c2=0;
-	mul_add_c(a[0],b[5],c3,c1,c2);
-	mul_add_c(a[1],b[4],c3,c1,c2);
-	mul_add_c(a[2],b[3],c3,c1,c2);
-	mul_add_c(a[3],b[2],c3,c1,c2);
-	mul_add_c(a[4],b[1],c3,c1,c2);
-	mul_add_c(a[5],b[0],c3,c1,c2);
-	r[5]=c3;
-	c3=0;
-	mul_add_c(a[6],b[0],c1,c2,c3);
-	mul_add_c(a[5],b[1],c1,c2,c3);
-	mul_add_c(a[4],b[2],c1,c2,c3);
-	mul_add_c(a[3],b[3],c1,c2,c3);
-	mul_add_c(a[2],b[4],c1,c2,c3);
-	mul_add_c(a[1],b[5],c1,c2,c3);
-	mul_add_c(a[0],b[6],c1,c2,c3);
-	r[6]=c1;
-	c1=0;
-	mul_add_c(a[0],b[7],c2,c3,c1);
-	mul_add_c(a[1],b[6],c2,c3,c1);
-	mul_add_c(a[2],b[5],c2,c3,c1);
-	mul_add_c(a[3],b[4],c2,c3,c1);
-	mul_add_c(a[4],b[3],c2,c3,c1);
-	mul_add_c(a[5],b[2],c2,c3,c1);
-	mul_add_c(a[6],b[1],c2,c3,c1);
-	mul_add_c(a[7],b[0],c2,c3,c1);
-	r[7]=c2;
-	c2=0;
-	mul_add_c(a[7],b[1],c3,c1,c2);
-	mul_add_c(a[6],b[2],c3,c1,c2);
-	mul_add_c(a[5],b[3],c3,c1,c2);
-	mul_add_c(a[4],b[4],c3,c1,c2);
-	mul_add_c(a[3],b[5],c3,c1,c2);
-	mul_add_c(a[2],b[6],c3,c1,c2);
-	mul_add_c(a[1],b[7],c3,c1,c2);
-	r[8]=c3;
-	c3=0;
-	mul_add_c(a[2],b[7],c1,c2,c3);
-	mul_add_c(a[3],b[6],c1,c2,c3);
-	mul_add_c(a[4],b[5],c1,c2,c3);
-	mul_add_c(a[5],b[4],c1,c2,c3);
-	mul_add_c(a[6],b[3],c1,c2,c3);
-	mul_add_c(a[7],b[2],c1,c2,c3);
-	r[9]=c1;
-	c1=0;
-	mul_add_c(a[7],b[3],c2,c3,c1);
-	mul_add_c(a[6],b[4],c2,c3,c1);
-	mul_add_c(a[5],b[5],c2,c3,c1);
-	mul_add_c(a[4],b[6],c2,c3,c1);
-	mul_add_c(a[3],b[7],c2,c3,c1);
-	r[10]=c2;
-	c2=0;
-	mul_add_c(a[4],b[7],c3,c1,c2);
-	mul_add_c(a[5],b[6],c3,c1,c2);
-	mul_add_c(a[6],b[5],c3,c1,c2);
-	mul_add_c(a[7],b[4],c3,c1,c2);
-	r[11]=c3;
-	c3=0;
-	mul_add_c(a[7],b[5],c1,c2,c3);
-	mul_add_c(a[6],b[6],c1,c2,c3);
-	mul_add_c(a[5],b[7],c1,c2,c3);
-	r[12]=c1;
-	c1=0;
-	mul_add_c(a[6],b[7],c2,c3,c1);
-	mul_add_c(a[7],b[6],c2,c3,c1);
-	r[13]=c2;
-	c2=0;
-	mul_add_c(a[7],b[7],c3,c1,c2);
-	r[14]=c3;
-	r[15]=c1;
-	}
-
-void bn_mul_comba4(BN_ULONG *r, BN_ULONG *a, BN_ULONG *b)
-	{
-#ifdef BN_LLONG
-	BN_ULLONG t;
-#else
-	BN_ULONG bl,bh;
-#endif
-	BN_ULONG t1,t2;
-	BN_ULONG c1,c2,c3;
-
-	c1=0;
-	c2=0;
-	c3=0;
-	mul_add_c(a[0],b[0],c1,c2,c3);
-	r[0]=c1;
-	c1=0;
-	mul_add_c(a[0],b[1],c2,c3,c1);
-	mul_add_c(a[1],b[0],c2,c3,c1);
-	r[1]=c2;
-	c2=0;
-	mul_add_c(a[2],b[0],c3,c1,c2);
-	mul_add_c(a[1],b[1],c3,c1,c2);
-	mul_add_c(a[0],b[2],c3,c1,c2);
-	r[2]=c3;
-	c3=0;
-	mul_add_c(a[0],b[3],c1,c2,c3);
-	mul_add_c(a[1],b[2],c1,c2,c3);
-	mul_add_c(a[2],b[1],c1,c2,c3);
-	mul_add_c(a[3],b[0],c1,c2,c3);
-	r[3]=c1;
-	c1=0;
-	mul_add_c(a[3],b[1],c2,c3,c1);
-	mul_add_c(a[2],b[2],c2,c3,c1);
-	mul_add_c(a[1],b[3],c2,c3,c1);
-	r[4]=c2;
-	c2=0;
-	mul_add_c(a[2],b[3],c3,c1,c2);
-	mul_add_c(a[3],b[2],c3,c1,c2);
-	r[5]=c3;
-	c3=0;
-	mul_add_c(a[3],b[3],c1,c2,c3);
-	r[6]=c1;
-	r[7]=c2;
-	}
-
-void bn_sqr_comba8(BN_ULONG *r, const BN_ULONG *a)
-	{
-#ifdef BN_LLONG
-	BN_ULLONG t,tt;
-#else
-	BN_ULONG bl,bh;
-#endif
-	BN_ULONG t1,t2;
-	BN_ULONG c1,c2,c3;
-
-	c1=0;
-	c2=0;
-	c3=0;
-	sqr_add_c(a,0,c1,c2,c3);
-	r[0]=c1;
-	c1=0;
-	sqr_add_c2(a,1,0,c2,c3,c1);
-	r[1]=c2;
-	c2=0;
-	sqr_add_c(a,1,c3,c1,c2);
-	sqr_add_c2(a,2,0,c3,c1,c2);
-	r[2]=c3;
-	c3=0;
-	sqr_add_c2(a,3,0,c1,c2,c3);
-	sqr_add_c2(a,2,1,c1,c2,c3);
-	r[3]=c1;
-	c1=0;
-	sqr_add_c(a,2,c2,c3,c1);
-	sqr_add_c2(a,3,1,c2,c3,c1);
-	sqr_add_c2(a,4,0,c2,c3,c1);
-	r[4]=c2;
-	c2=0;
-	sqr_add_c2(a,5,0,c3,c1,c2);
-	sqr_add_c2(a,4,1,c3,c1,c2);
-	sqr_add_c2(a,3,2,c3,c1,c2);
-	r[5]=c3;
-	c3=0;
-	sqr_add_c(a,3,c1,c2,c3);
-	sqr_add_c2(a,4,2,c1,c2,c3);
-	sqr_add_c2(a,5,1,c1,c2,c3);
-	sqr_add_c2(a,6,0,c1,c2,c3);
-	r[6]=c1;
-	c1=0;
-	sqr_add_c2(a,7,0,c2,c3,c1);
-	sqr_add_c2(a,6,1,c2,c3,c1);
-	sqr_add_c2(a,5,2,c2,c3,c1);
-	sqr_add_c2(a,4,3,c2,c3,c1);
-	r[7]=c2;
-	c2=0;
-	sqr_add_c(a,4,c3,c1,c2);
-	sqr_add_c2(a,5,3,c3,c1,c2);
-	sqr_add_c2(a,6,2,c3,c1,c2);
-	sqr_add_c2(a,7,1,c3,c1,c2);
-	r[8]=c3;
-	c3=0;
-	sqr_add_c2(a,7,2,c1,c2,c3);
-	sqr_add_c2(a,6,3,c1,c2,c3);
-	sqr_add_c2(a,5,4,c1,c2,c3);
-	r[9]=c1;
-	c1=0;
-	sqr_add_c(a,5,c2,c3,c1);
-	sqr_add_c2(a,6,4,c2,c3,c1);
-	sqr_add_c2(a,7,3,c2,c3,c1);
-	r[10]=c2;
-	c2=0;
-	sqr_add_c2(a,7,4,c3,c1,c2);
-	sqr_add_c2(a,6,5,c3,c1,c2);
-	r[11]=c3;
-	c3=0;
-	sqr_add_c(a,6,c1,c2,c3);
-	sqr_add_c2(a,7,5,c1,c2,c3);
-	r[12]=c1;
-	c1=0;
-	sqr_add_c2(a,7,6,c2,c3,c1);
-	r[13]=c2;
-	c2=0;
-	sqr_add_c(a,7,c3,c1,c2);
-	r[14]=c3;
-	r[15]=c1;
-	}
-
-void bn_sqr_comba4(BN_ULONG *r, const BN_ULONG *a)
-	{
-#ifdef BN_LLONG
-	BN_ULLONG t,tt;
-#else
-	BN_ULONG bl,bh;
-#endif
-	BN_ULONG t1,t2;
-	BN_ULONG c1,c2,c3;
-
-	c1=0;
-	c2=0;
-	c3=0;
-	sqr_add_c(a,0,c1,c2,c3);
-	r[0]=c1;
-	c1=0;
-	sqr_add_c2(a,1,0,c2,c3,c1);
-	r[1]=c2;
-	c2=0;
-	sqr_add_c(a,1,c3,c1,c2);
-	sqr_add_c2(a,2,0,c3,c1,c2);
-	r[2]=c3;
-	c3=0;
-	sqr_add_c2(a,3,0,c1,c2,c3);
-	sqr_add_c2(a,2,1,c1,c2,c3);
-	r[3]=c1;
-	c1=0;
-	sqr_add_c(a,2,c2,c3,c1);
-	sqr_add_c2(a,3,1,c2,c3,c1);
-	r[4]=c2;
-	c2=0;
-	sqr_add_c2(a,3,2,c3,c1,c2);
-	r[5]=c3;
-	c3=0;
-	sqr_add_c(a,3,c1,c2,c3);
-	r[6]=c1;
-	r[7]=c2;
-	}
-#else /* !BN_MUL_COMBA */
-
-/* hmm... is it faster just to do a multiply? */
-#undef bn_sqr_comba4
-void bn_sqr_comba4(BN_ULONG *r, BN_ULONG *a)
-	{
-	BN_ULONG t[8];
-	bn_sqr_normal(r,a,4,t);
-	}
-
-#undef bn_sqr_comba8
-void bn_sqr_comba8(BN_ULONG *r, BN_ULONG *a)
-	{
-	BN_ULONG t[16];
-	bn_sqr_normal(r,a,8,t);
-	}
-
-void bn_mul_comba4(BN_ULONG *r, BN_ULONG *a, BN_ULONG *b)
-	{
-	r[4]=bn_mul_words(    &(r[0]),a,4,b[0]);
-	r[5]=bn_mul_add_words(&(r[1]),a,4,b[1]);
-	r[6]=bn_mul_add_words(&(r[2]),a,4,b[2]);
-	r[7]=bn_mul_add_words(&(r[3]),a,4,b[3]);
-	}
-
-void bn_mul_comba8(BN_ULONG *r, BN_ULONG *a, BN_ULONG *b)
-	{
-	r[ 8]=bn_mul_words(    &(r[0]),a,8,b[0]);
-	r[ 9]=bn_mul_add_words(&(r[1]),a,8,b[1]);
-	r[10]=bn_mul_add_words(&(r[2]),a,8,b[2]);
-	r[11]=bn_mul_add_words(&(r[3]),a,8,b[3]);
-	r[12]=bn_mul_add_words(&(r[4]),a,8,b[4]);
-	r[13]=bn_mul_add_words(&(r[5]),a,8,b[5]);
-	r[14]=bn_mul_add_words(&(r[6]),a,8,b[6]);
-	r[15]=bn_mul_add_words(&(r[7]),a,8,b[7]);
-	}
-
-#endif /* !BN_MUL_COMBA */
diff --git a/crypto/openssl/crypto/bn/bn_blind.c b/crypto/openssl/crypto/bn/bn_blind.c
deleted file mode 100644
index ca22d4f8bdcb..000000000000
--- a/crypto/openssl/crypto/bn/bn_blind.c
+++ /dev/null
@@ -1,359 +0,0 @@
-/* crypto/bn/bn_blind.c */
-/* ====================================================================
- * Copyright (c) 1998-2005 The OpenSSL Project.  All rights reserved.
- *
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions
- * are met:
- *
- * 1. Redistributions of source code must retain the above copyright
- *    notice, this list of conditions and the following disclaimer. 
- *
- * 2. Redistributions in binary form must reproduce the above copyright
- *    notice, this list of conditions and the following disclaimer in
- *    the documentation and/or other materials provided with the
- *    distribution.
- *
- * 3. All advertising materials mentioning features or use of this
- *    software must display the following acknowledgment:
- *    "This product includes software developed by the OpenSSL Project
- *    for use in the OpenSSL Toolkit. (http://www.openssl.org/)"
- *
- * 4. The names "OpenSSL Toolkit" and "OpenSSL Project" must not be used to
- *    endorse or promote products derived from this software without
- *    prior written permission. For written permission, please contact
- *    openssl-core@openssl.org.
- *
- * 5. Products derived from this software may not be called "OpenSSL"
- *    nor may "OpenSSL" appear in their names without prior written
- *    permission of the OpenSSL Project.
- *
- * 6. Redistributions of any form whatsoever must retain the following
- *    acknowledgment:
- *    "This product includes software developed by the OpenSSL Project
- *    for use in the OpenSSL Toolkit (http://www.openssl.org/)"
- *
- * THIS SOFTWARE IS PROVIDED BY THE OpenSSL PROJECT ``AS IS'' AND ANY
- * EXPRESSED OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
- * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR
- * PURPOSE ARE DISCLAIMED.  IN NO EVENT SHALL THE OpenSSL PROJECT OR
- * ITS CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
- * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
- * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
- * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
- * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
- * STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
- * ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED
- * OF THE POSSIBILITY OF SUCH DAMAGE.
- * ====================================================================
- *
- * This product includes cryptographic software written by Eric Young
- * (eay@cryptsoft.com).  This product includes software written by Tim
- * Hudson (tjh@cryptsoft.com).
- *
- */
-/* Copyright (C) 1995-1998 Eric Young (eay@cryptsoft.com)
- * All rights reserved.
- *
- * This package is an SSL implementation written
- * by Eric Young (eay@cryptsoft.com).
- * The implementation was written so as to conform with Netscapes SSL.
- * 
- * This library is free for commercial and non-commercial use as long as
- * the following conditions are aheared to.  The following conditions
- * apply to all code found in this distribution, be it the RC4, RSA,
- * lhash, DES, etc., code; not just the SSL code.  The SSL documentation
- * included with this distribution is covered by the same copyright terms
- * except that the holder is Tim Hudson (tjh@cryptsoft.com).
- * 
- * Copyright remains Eric Young's, and as such any Copyright notices in
- * the code are not to be removed.
- * If this package is used in a product, Eric Young should be given attribution
- * as the author of the parts of the library used.
- * This can be in the form of a textual message at program startup or
- * in documentation (online or textual) provided with the package.
- * 
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions
- * are met:
- * 1. Redistributions of source code must retain the copyright
- *    notice, this list of conditions and the following disclaimer.
- * 2. Redistributions in binary form must reproduce the above copyright
- *    notice, this list of conditions and the following disclaimer in the
- *    documentation and/or other materials provided with the distribution.
- * 3. All advertising materials mentioning features or use of this software
- *    must display the following acknowledgement:
- *    "This product includes cryptographic software written by
- *     Eric Young (eay@cryptsoft.com)"
- *    The word 'cryptographic' can be left out if the rouines from the library
- *    being used are not cryptographic related :-).
- * 4. If you include any Windows specific code (or a derivative thereof) from 
- *    the apps directory (application code) you must include an acknowledgement:
- *    "This product includes software written by Tim Hudson (tjh@cryptsoft.com)"
- * 
- * THIS SOFTWARE IS PROVIDED BY ERIC YOUNG ``AS IS'' AND
- * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
- * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
- * ARE DISCLAIMED.  IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE
- * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
- * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
- * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
- * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
- * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
- * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
- * SUCH DAMAGE.
- * 
- * The licence and distribution terms for any publically available version or
- * derivative of this code cannot be changed.  i.e. this code cannot simply be
- * copied and put under another distribution licence
- * [including the GNU Public Licence.]
- */
-
-#include <stdio.h>
-#include "cryptlib.h"
-#include "bn_lcl.h"
-
-#define BN_BLINDING_COUNTER	32
-
-struct bn_blinding_st
-	{
-	BIGNUM *A;
-	BIGNUM *Ai;
-	BIGNUM *e;
-	BIGNUM *mod; /* just a reference */
-	unsigned long thread_id; /* added in OpenSSL 0.9.6j and 0.9.7b;
-				  * used only by crypto/rsa/rsa_eay.c, rsa_lib.c */
-	unsigned int  counter;
-	unsigned long flags;
-	BN_MONT_CTX *m_ctx;
-	int (*bn_mod_exp)(BIGNUM *r, const BIGNUM *a, const BIGNUM *p,
-			  const BIGNUM *m, BN_CTX *ctx,
-			  BN_MONT_CTX *m_ctx);
-	};
-
-BN_BLINDING *BN_BLINDING_new(const BIGNUM *A, const BIGNUM *Ai, BIGNUM *mod)
-	{
-	BN_BLINDING *ret=NULL;
-
-	bn_check_top(mod);
-
-	if ((ret=(BN_BLINDING *)OPENSSL_malloc(sizeof(BN_BLINDING))) == NULL)
-		{
-		BNerr(BN_F_BN_BLINDING_NEW,ERR_R_MALLOC_FAILURE);
-		return(NULL);
-		}
-	memset(ret,0,sizeof(BN_BLINDING));
-	if (A != NULL)
-		{
-		if ((ret->A  = BN_dup(A))  == NULL) goto err;
-		}
-	if (Ai != NULL)
-		{
-		if ((ret->Ai = BN_dup(Ai)) == NULL) goto err;
-		}
-	ret->mod = mod;
-	ret->counter = BN_BLINDING_COUNTER;
-	return(ret);
-err:
-	if (ret != NULL) BN_BLINDING_free(ret);
-	return(NULL);
-	}
-
-void BN_BLINDING_free(BN_BLINDING *r)
-	{
-	if(r == NULL)
-	    return;
-
-	if (r->A  != NULL) BN_free(r->A );
-	if (r->Ai != NULL) BN_free(r->Ai);
-	if (r->e  != NULL) BN_free(r->e );
-	OPENSSL_free(r);
-	}
-
-int BN_BLINDING_update(BN_BLINDING *b, BN_CTX *ctx)
-	{
-	int ret=0;
-
-	if ((b->A == NULL) || (b->Ai == NULL))
-		{
-		BNerr(BN_F_BN_BLINDING_UPDATE,BN_R_NOT_INITIALIZED);
-		goto err;
-		}
-
-	if (--(b->counter) == 0 && b->e != NULL &&
-		!(b->flags & BN_BLINDING_NO_RECREATE))
-		{
-		/* re-create blinding parameters */
-		if (!BN_BLINDING_create_param(b, NULL, NULL, ctx, NULL, NULL))
-			goto err;
-		}
-	else if (!(b->flags & BN_BLINDING_NO_UPDATE))
-		{
-		if (!BN_mod_mul(b->A,b->A,b->A,b->mod,ctx)) goto err;
-		if (!BN_mod_mul(b->Ai,b->Ai,b->Ai,b->mod,ctx)) goto err;
-		}
-
-	ret=1;
-err:
-	if (b->counter == 0)
-		b->counter = BN_BLINDING_COUNTER;
-	return(ret);
-	}
-
-int BN_BLINDING_convert(BIGNUM *n, BN_BLINDING *b, BN_CTX *ctx)
-	{
-	return BN_BLINDING_convert_ex(n, NULL, b, ctx);
-	}
-
-int BN_BLINDING_convert_ex(BIGNUM *n, BIGNUM *r, BN_BLINDING *b, BN_CTX *ctx)
-	{
-	int ret = 1;
-
-	bn_check_top(n);
-
-	if ((b->A == NULL) || (b->Ai == NULL))
-		{
-		BNerr(BN_F_BN_BLINDING_CONVERT_EX,BN_R_NOT_INITIALIZED);
-		return(0);
-		}
-
-	if (r != NULL)
-		{
-		if (!BN_copy(r, b->Ai)) ret=0;
-		}
-
-	if (!BN_mod_mul(n,n,b->A,b->mod,ctx)) ret=0;
-	
-	return ret;
-	}
-
-int BN_BLINDING_invert(BIGNUM *n, BN_BLINDING *b, BN_CTX *ctx)
-	{
-	return BN_BLINDING_invert_ex(n, NULL, b, ctx);
-	}
-
-int BN_BLINDING_invert_ex(BIGNUM *n, const BIGNUM *r, BN_BLINDING *b, BN_CTX *ctx)
-	{
-	int ret;
-
-	bn_check_top(n);
-	if ((b->A == NULL) || (b->Ai == NULL))
-		{
-		BNerr(BN_F_BN_BLINDING_INVERT_EX,BN_R_NOT_INITIALIZED);
-		return(0);
-		}
-
-	if (r != NULL)
-		ret = BN_mod_mul(n, n, r, b->mod, ctx);
-	else
-		ret = BN_mod_mul(n, n, b->Ai, b->mod, ctx);
-
-	if (ret >= 0)
-		{
-		if (!BN_BLINDING_update(b,ctx))
-			return(0);
-		}
-	bn_check_top(n);
-	return(ret);
-	}
-
-unsigned long BN_BLINDING_get_thread_id(const BN_BLINDING *b)
-	{
-	return b->thread_id;
-	}
-
-void BN_BLINDING_set_thread_id(BN_BLINDING *b, unsigned long n)
-	{
-	b->thread_id = n;
-	}
-
-unsigned long BN_BLINDING_get_flags(const BN_BLINDING *b)
-	{
-	return b->flags;
-	}
-
-void BN_BLINDING_set_flags(BN_BLINDING *b, unsigned long flags)
-	{
-	b->flags = flags;
-	}
-
-BN_BLINDING *BN_BLINDING_create_param(BN_BLINDING *b,
-	const BIGNUM *e, BIGNUM *m, BN_CTX *ctx,
-	int (*bn_mod_exp)(BIGNUM *r, const BIGNUM *a, const BIGNUM *p,
-			  const BIGNUM *m, BN_CTX *ctx, BN_MONT_CTX *m_ctx),
-	BN_MONT_CTX *m_ctx)
-{
-	int    retry_counter = 32;
-	BN_BLINDING *ret = NULL;
-
-	if (b == NULL)
-		ret = BN_BLINDING_new(NULL, NULL, m);
-	else
-		ret = b;
-
-	if (ret == NULL)
-		goto err;
-
-	if (ret->A  == NULL && (ret->A  = BN_new()) == NULL)
-		goto err;
-	if (ret->Ai == NULL && (ret->Ai	= BN_new()) == NULL)
-		goto err;
-
-	if (e != NULL)
-		{
-		if (ret->e != NULL)
-			BN_free(ret->e);
-		ret->e = BN_dup(e);
-		}
-	if (ret->e == NULL)
-		goto err;
-
-	if (bn_mod_exp != NULL)
-		ret->bn_mod_exp = bn_mod_exp;
-	if (m_ctx != NULL)
-		ret->m_ctx = m_ctx;
-
-	do {
-		if (!BN_rand_range(ret->A, ret->mod)) goto err;
-		if (BN_mod_inverse(ret->Ai, ret->A, ret->mod, ctx) == NULL)
-			{
-			/* this should almost never happen for good RSA keys */
-			unsigned long error = ERR_peek_last_error();
-			if (ERR_GET_REASON(error) == BN_R_NO_INVERSE)
-				{
-				if (retry_counter-- == 0)
-				{
-					BNerr(BN_F_BN_BLINDING_CREATE_PARAM,
-						BN_R_TOO_MANY_ITERATIONS);
-					goto err;
-				}
-				ERR_clear_error();
-				}
-			else
-				goto err;
-			}
-		else
-			break;
-	} while (1);
-
-	if (ret->bn_mod_exp != NULL && ret->m_ctx != NULL)
-		{
-		if (!ret->bn_mod_exp(ret->A, ret->A, ret->e, ret->mod, ctx, ret->m_ctx))
-			goto err;
-		}
-	else
-		{
-		if (!BN_mod_exp(ret->A, ret->A, ret->e, ret->mod, ctx))
-			goto err;
-		}
-
-	return ret;
-err:
-	if (b == NULL && ret != NULL)
-		{
-		BN_BLINDING_free(ret);
-		ret = NULL;
-		}
-
-	return ret;
-}
diff --git a/crypto/openssl/crypto/bn/bn_const.c b/crypto/openssl/crypto/bn/bn_const.c
deleted file mode 100755
index eb60a25b3c73..000000000000
--- a/crypto/openssl/crypto/bn/bn_const.c
+++ /dev/null
@@ -1,402 +0,0 @@
-/* crypto/bn/knownprimes.c */
-/* Insert boilerplate */
-
-#include "bn.h"
-
-/* "First Oakley Default Group" from RFC2409, section 6.1.
- *
- * The prime is: 2^768 - 2 ^704 - 1 + 2^64 * { [2^638 pi] + 149686 }
- *
- * RFC2409 specifies a generator of 2.
- * RFC2412 specifies a generator of of 22.
- */
-
-BIGNUM *get_rfc2409_prime_768(BIGNUM *bn)
-	{
-	static const unsigned char RFC2409_PRIME_768[]={
-		0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xC9,0x0F,0xDA,0xA2,
-		0x21,0x68,0xC2,0x34,0xC4,0xC6,0x62,0x8B,0x80,0xDC,0x1C,0xD1,
-		0x29,0x02,0x4E,0x08,0x8A,0x67,0xCC,0x74,0x02,0x0B,0xBE,0xA6,
-		0x3B,0x13,0x9B,0x22,0x51,0x4A,0x08,0x79,0x8E,0x34,0x04,0xDD,
-		0xEF,0x95,0x19,0xB3,0xCD,0x3A,0x43,0x1B,0x30,0x2B,0x0A,0x6D,
-		0xF2,0x5F,0x14,0x37,0x4F,0xE1,0x35,0x6D,0x6D,0x51,0xC2,0x45,
-		0xE4,0x85,0xB5,0x76,0x62,0x5E,0x7E,0xC6,0xF4,0x4C,0x42,0xE9,
-		0xA6,0x3A,0x36,0x20,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,
-		};
-	return BN_bin2bn(RFC2409_PRIME_768,sizeof(RFC2409_PRIME_768),bn);
-	}
-
-/* "Second Oakley Default Group" from RFC2409, section 6.2.
- *
- * The prime is: 2^1024 - 2^960 - 1 + 2^64 * { [2^894 pi] + 129093 }.
- *
- * RFC2409 specifies a generator of 2.
- * RFC2412 specifies a generator of 22.
- */
-
-BIGNUM *get_rfc2409_prime_1024(BIGNUM *bn)
-	{
-	static const unsigned char RFC2409_PRIME_1024[]={
-		0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xC9,0x0F,0xDA,0xA2,
-		0x21,0x68,0xC2,0x34,0xC4,0xC6,0x62,0x8B,0x80,0xDC,0x1C,0xD1,
-		0x29,0x02,0x4E,0x08,0x8A,0x67,0xCC,0x74,0x02,0x0B,0xBE,0xA6,
-		0x3B,0x13,0x9B,0x22,0x51,0x4A,0x08,0x79,0x8E,0x34,0x04,0xDD,
-		0xEF,0x95,0x19,0xB3,0xCD,0x3A,0x43,0x1B,0x30,0x2B,0x0A,0x6D,
-		0xF2,0x5F,0x14,0x37,0x4F,0xE1,0x35,0x6D,0x6D,0x51,0xC2,0x45,
-		0xE4,0x85,0xB5,0x76,0x62,0x5E,0x7E,0xC6,0xF4,0x4C,0x42,0xE9,
-		0xA6,0x37,0xED,0x6B,0x0B,0xFF,0x5C,0xB6,0xF4,0x06,0xB7,0xED,
-		0xEE,0x38,0x6B,0xFB,0x5A,0x89,0x9F,0xA5,0xAE,0x9F,0x24,0x11,
-		0x7C,0x4B,0x1F,0xE6,0x49,0x28,0x66,0x51,0xEC,0xE6,0x53,0x81,
-		0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,
-		};
-	return BN_bin2bn(RFC2409_PRIME_1024,sizeof(RFC2409_PRIME_1024),bn);
-	}
-
-/* "1536-bit MODP Group" from RFC3526, Section 2.
- *
- * The prime is: 2^1536 - 2^1472 - 1 + 2^64 * { [2^1406 pi] + 741804 }
- *
- * RFC3526 specifies a generator of 2.
- * RFC2312 specifies a generator of 22.
- */
-
-BIGNUM *get_rfc3526_prime_1536(BIGNUM *bn)
-	{
-	static const unsigned char RFC3526_PRIME_1536[]={
-		0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xC9,0x0F,0xDA,0xA2,
-		0x21,0x68,0xC2,0x34,0xC4,0xC6,0x62,0x8B,0x80,0xDC,0x1C,0xD1,
-		0x29,0x02,0x4E,0x08,0x8A,0x67,0xCC,0x74,0x02,0x0B,0xBE,0xA6,
-		0x3B,0x13,0x9B,0x22,0x51,0x4A,0x08,0x79,0x8E,0x34,0x04,0xDD,
-		0xEF,0x95,0x19,0xB3,0xCD,0x3A,0x43,0x1B,0x30,0x2B,0x0A,0x6D,
-		0xF2,0x5F,0x14,0x37,0x4F,0xE1,0x35,0x6D,0x6D,0x51,0xC2,0x45,
-		0xE4,0x85,0xB5,0x76,0x62,0x5E,0x7E,0xC6,0xF4,0x4C,0x42,0xE9,
-		0xA6,0x37,0xED,0x6B,0x0B,0xFF,0x5C,0xB6,0xF4,0x06,0xB7,0xED,
-		0xEE,0x38,0x6B,0xFB,0x5A,0x89,0x9F,0xA5,0xAE,0x9F,0x24,0x11,
-		0x7C,0x4B,0x1F,0xE6,0x49,0x28,0x66,0x51,0xEC,0xE4,0x5B,0x3D,
-		0xC2,0x00,0x7C,0xB8,0xA1,0x63,0xBF,0x05,0x98,0xDA,0x48,0x36,
-		0x1C,0x55,0xD3,0x9A,0x69,0x16,0x3F,0xA8,0xFD,0x24,0xCF,0x5F,
-		0x83,0x65,0x5D,0x23,0xDC,0xA3,0xAD,0x96,0x1C,0x62,0xF3,0x56,
-		0x20,0x85,0x52,0xBB,0x9E,0xD5,0x29,0x07,0x70,0x96,0x96,0x6D,
-		0x67,0x0C,0x35,0x4E,0x4A,0xBC,0x98,0x04,0xF1,0x74,0x6C,0x08,
-		0xCA,0x23,0x73,0x27,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,
-		};
-	return BN_bin2bn(RFC3526_PRIME_1536,sizeof(RFC3526_PRIME_1536),bn);
-	}
-
-/* "2048-bit MODP Group" from RFC3526, Section 3.
- *
- * The prime is: 2^2048 - 2^1984 - 1 + 2^64 * { [2^1918 pi] + 124476 }
- *
- * RFC3526 specifies a generator of 2.
- */
-
-BIGNUM *get_rfc3526_prime_2048(BIGNUM *bn)
-	{
-	static const unsigned char RFC3526_PRIME_2048[]={
-		0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xC9,0x0F,0xDA,0xA2,
-		0x21,0x68,0xC2,0x34,0xC4,0xC6,0x62,0x8B,0x80,0xDC,0x1C,0xD1,
-		0x29,0x02,0x4E,0x08,0x8A,0x67,0xCC,0x74,0x02,0x0B,0xBE,0xA6,
-		0x3B,0x13,0x9B,0x22,0x51,0x4A,0x08,0x79,0x8E,0x34,0x04,0xDD,
-		0xEF,0x95,0x19,0xB3,0xCD,0x3A,0x43,0x1B,0x30,0x2B,0x0A,0x6D,
-		0xF2,0x5F,0x14,0x37,0x4F,0xE1,0x35,0x6D,0x6D,0x51,0xC2,0x45,
-		0xE4,0x85,0xB5,0x76,0x62,0x5E,0x7E,0xC6,0xF4,0x4C,0x42,0xE9,
-		0xA6,0x37,0xED,0x6B,0x0B,0xFF,0x5C,0xB6,0xF4,0x06,0xB7,0xED,
-		0xEE,0x38,0x6B,0xFB,0x5A,0x89,0x9F,0xA5,0xAE,0x9F,0x24,0x11,
-		0x7C,0x4B,0x1F,0xE6,0x49,0x28,0x66,0x51,0xEC,0xE4,0x5B,0x3D,
-		0xC2,0x00,0x7C,0xB8,0xA1,0x63,0xBF,0x05,0x98,0xDA,0x48,0x36,
-		0x1C,0x55,0xD3,0x9A,0x69,0x16,0x3F,0xA8,0xFD,0x24,0xCF,0x5F,
-		0x83,0x65,0x5D,0x23,0xDC,0xA3,0xAD,0x96,0x1C,0x62,0xF3,0x56,
-		0x20,0x85,0x52,0xBB,0x9E,0xD5,0x29,0x07,0x70,0x96,0x96,0x6D,
-		0x67,0x0C,0x35,0x4E,0x4A,0xBC,0x98,0x04,0xF1,0x74,0x6C,0x08,
-		0xCA,0x18,0x21,0x7C,0x32,0x90,0x5E,0x46,0x2E,0x36,0xCE,0x3B,
-		0xE3,0x9E,0x77,0x2C,0x18,0x0E,0x86,0x03,0x9B,0x27,0x83,0xA2,
-		0xEC,0x07,0xA2,0x8F,0xB5,0xC5,0x5D,0xF0,0x6F,0x4C,0x52,0xC9,
-		0xDE,0x2B,0xCB,0xF6,0x95,0x58,0x17,0x18,0x39,0x95,0x49,0x7C,
-		0xEA,0x95,0x6A,0xE5,0x15,0xD2,0x26,0x18,0x98,0xFA,0x05,0x10,
-		0x15,0x72,0x8E,0x5A,0x8A,0xAC,0xAA,0x68,0xFF,0xFF,0xFF,0xFF,
-		0xFF,0xFF,0xFF,0xFF,
-		};
-	return BN_bin2bn(RFC3526_PRIME_2048,sizeof(RFC3526_PRIME_2048),bn);
-	}
-
-/* "3072-bit MODP Group" from RFC3526, Section 4.
- *
- * The prime is: 2^3072 - 2^3008 - 1 + 2^64 * { [2^2942 pi] + 1690314 }
- *
- * RFC3526 specifies a generator of 2.
- */
-
-BIGNUM *get_rfc3526_prime_3072(BIGNUM *bn)
-	{
-	static const unsigned char RFC3526_PRIME_3072[]={
-		0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xC9,0x0F,0xDA,0xA2,
-		0x21,0x68,0xC2,0x34,0xC4,0xC6,0x62,0x8B,0x80,0xDC,0x1C,0xD1,
-		0x29,0x02,0x4E,0x08,0x8A,0x67,0xCC,0x74,0x02,0x0B,0xBE,0xA6,
-		0x3B,0x13,0x9B,0x22,0x51,0x4A,0x08,0x79,0x8E,0x34,0x04,0xDD,
-		0xEF,0x95,0x19,0xB3,0xCD,0x3A,0x43,0x1B,0x30,0x2B,0x0A,0x6D,
-		0xF2,0x5F,0x14,0x37,0x4F,0xE1,0x35,0x6D,0x6D,0x51,0xC2,0x45,
-		0xE4,0x85,0xB5,0x76,0x62,0x5E,0x7E,0xC6,0xF4,0x4C,0x42,0xE9,
-		0xA6,0x37,0xED,0x6B,0x0B,0xFF,0x5C,0xB6,0xF4,0x06,0xB7,0xED,
-		0xEE,0x38,0x6B,0xFB,0x5A,0x89,0x9F,0xA5,0xAE,0x9F,0x24,0x11,
-		0x7C,0x4B,0x1F,0xE6,0x49,0x28,0x66,0x51,0xEC,0xE4,0x5B,0x3D,
-		0xC2,0x00,0x7C,0xB8,0xA1,0x63,0xBF,0x05,0x98,0xDA,0x48,0x36,
-		0x1C,0x55,0xD3,0x9A,0x69,0x16,0x3F,0xA8,0xFD,0x24,0xCF,0x5F,
-		0x83,0x65,0x5D,0x23,0xDC,0xA3,0xAD,0x96,0x1C,0x62,0xF3,0x56,
-		0x20,0x85,0x52,0xBB,0x9E,0xD5,0x29,0x07,0x70,0x96,0x96,0x6D,
-		0x67,0x0C,0x35,0x4E,0x4A,0xBC,0x98,0x04,0xF1,0x74,0x6C,0x08,
-		0xCA,0x18,0x21,0x7C,0x32,0x90,0x5E,0x46,0x2E,0x36,0xCE,0x3B,
-		0xE3,0x9E,0x77,0x2C,0x18,0x0E,0x86,0x03,0x9B,0x27,0x83,0xA2,
-		0xEC,0x07,0xA2,0x8F,0xB5,0xC5,0x5D,0xF0,0x6F,0x4C,0x52,0xC9,
-		0xDE,0x2B,0xCB,0xF6,0x95,0x58,0x17,0x18,0x39,0x95,0x49,0x7C,
-		0xEA,0x95,0x6A,0xE5,0x15,0xD2,0x26,0x18,0x98,0xFA,0x05,0x10,
-		0x15,0x72,0x8E,0x5A,0x8A,0xAA,0xC4,0x2D,0xAD,0x33,0x17,0x0D,
-		0x04,0x50,0x7A,0x33,0xA8,0x55,0x21,0xAB,0xDF,0x1C,0xBA,0x64,
-		0xEC,0xFB,0x85,0x04,0x58,0xDB,0xEF,0x0A,0x8A,0xEA,0x71,0x57,
-		0x5D,0x06,0x0C,0x7D,0xB3,0x97,0x0F,0x85,0xA6,0xE1,0xE4,0xC7,
-		0xAB,0xF5,0xAE,0x8C,0xDB,0x09,0x33,0xD7,0x1E,0x8C,0x94,0xE0,
-		0x4A,0x25,0x61,0x9D,0xCE,0xE3,0xD2,0x26,0x1A,0xD2,0xEE,0x6B,
-		0xF1,0x2F,0xFA,0x06,0xD9,0x8A,0x08,0x64,0xD8,0x76,0x02,0x73,
-		0x3E,0xC8,0x6A,0x64,0x52,0x1F,0x2B,0x18,0x17,0x7B,0x20,0x0C,
-		0xBB,0xE1,0x17,0x57,0x7A,0x61,0x5D,0x6C,0x77,0x09,0x88,0xC0,
-		0xBA,0xD9,0x46,0xE2,0x08,0xE2,0x4F,0xA0,0x74,0xE5,0xAB,0x31,
-		0x43,0xDB,0x5B,0xFC,0xE0,0xFD,0x10,0x8E,0x4B,0x82,0xD1,0x20,
-		0xA9,0x3A,0xD2,0xCA,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,
-		};
-	return BN_bin2bn(RFC3526_PRIME_3072,sizeof(RFC3526_PRIME_3072),bn);
-	}
-
-/* "4096-bit MODP Group" from RFC3526, Section 5.
- *
- * The prime is: 2^4096 - 2^4032 - 1 + 2^64 * { [2^3966 pi] + 240904 }
- *
- * RFC3526 specifies a generator of 2.
- */
-
-BIGNUM *get_rfc3526_prime_4096(BIGNUM *bn)
-	{
-	static const unsigned char RFC3526_PRIME_4096[]={
-		0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xC9,0x0F,0xDA,0xA2,
-		0x21,0x68,0xC2,0x34,0xC4,0xC6,0x62,0x8B,0x80,0xDC,0x1C,0xD1,
-		0x29,0x02,0x4E,0x08,0x8A,0x67,0xCC,0x74,0x02,0x0B,0xBE,0xA6,
-		0x3B,0x13,0x9B,0x22,0x51,0x4A,0x08,0x79,0x8E,0x34,0x04,0xDD,
-		0xEF,0x95,0x19,0xB3,0xCD,0x3A,0x43,0x1B,0x30,0x2B,0x0A,0x6D,
-		0xF2,0x5F,0x14,0x37,0x4F,0xE1,0x35,0x6D,0x6D,0x51,0xC2,0x45,
-		0xE4,0x85,0xB5,0x76,0x62,0x5E,0x7E,0xC6,0xF4,0x4C,0x42,0xE9,
-		0xA6,0x37,0xED,0x6B,0x0B,0xFF,0x5C,0xB6,0xF4,0x06,0xB7,0xED,
-		0xEE,0x38,0x6B,0xFB,0x5A,0x89,0x9F,0xA5,0xAE,0x9F,0x24,0x11,
-		0x7C,0x4B,0x1F,0xE6,0x49,0x28,0x66,0x51,0xEC,0xE4,0x5B,0x3D,
-		0xC2,0x00,0x7C,0xB8,0xA1,0x63,0xBF,0x05,0x98,0xDA,0x48,0x36,
-		0x1C,0x55,0xD3,0x9A,0x69,0x16,0x3F,0xA8,0xFD,0x24,0xCF,0x5F,
-		0x83,0x65,0x5D,0x23,0xDC,0xA3,0xAD,0x96,0x1C,0x62,0xF3,0x56,
-		0x20,0x85,0x52,0xBB,0x9E,0xD5,0x29,0x07,0x70,0x96,0x96,0x6D,
-		0x67,0x0C,0x35,0x4E,0x4A,0xBC,0x98,0x04,0xF1,0x74,0x6C,0x08,
-		0xCA,0x18,0x21,0x7C,0x32,0x90,0x5E,0x46,0x2E,0x36,0xCE,0x3B,
-		0xE3,0x9E,0x77,0x2C,0x18,0x0E,0x86,0x03,0x9B,0x27,0x83,0xA2,
-		0xEC,0x07,0xA2,0x8F,0xB5,0xC5,0x5D,0xF0,0x6F,0x4C,0x52,0xC9,
-		0xDE,0x2B,0xCB,0xF6,0x95,0x58,0x17,0x18,0x39,0x95,0x49,0x7C,
-		0xEA,0x95,0x6A,0xE5,0x15,0xD2,0x26,0x18,0x98,0xFA,0x05,0x10,
-		0x15,0x72,0x8E,0x5A,0x8A,0xAA,0xC4,0x2D,0xAD,0x33,0x17,0x0D,
-		0x04,0x50,0x7A,0x33,0xA8,0x55,0x21,0xAB,0xDF,0x1C,0xBA,0x64,
-		0xEC,0xFB,0x85,0x04,0x58,0xDB,0xEF,0x0A,0x8A,0xEA,0x71,0x57,
-		0x5D,0x06,0x0C,0x7D,0xB3,0x97,0x0F,0x85,0xA6,0xE1,0xE4,0xC7,
-		0xAB,0xF5,0xAE,0x8C,0xDB,0x09,0x33,0xD7,0x1E,0x8C,0x94,0xE0,
-		0x4A,0x25,0x61,0x9D,0xCE,0xE3,0xD2,0x26,0x1A,0xD2,0xEE,0x6B,
-		0xF1,0x2F,0xFA,0x06,0xD9,0x8A,0x08,0x64,0xD8,0x76,0x02,0x73,
-		0x3E,0xC8,0x6A,0x64,0x52,0x1F,0x2B,0x18,0x17,0x7B,0x20,0x0C,
-		0xBB,0xE1,0x17,0x57,0x7A,0x61,0x5D,0x6C,0x77,0x09,0x88,0xC0,
-		0xBA,0xD9,0x46,0xE2,0x08,0xE2,0x4F,0xA0,0x74,0xE5,0xAB,0x31,
-		0x43,0xDB,0x5B,0xFC,0xE0,0xFD,0x10,0x8E,0x4B,0x82,0xD1,0x20,
-		0xA9,0x21,0x08,0x01,0x1A,0x72,0x3C,0x12,0xA7,0x87,0xE6,0xD7,
-		0x88,0x71,0x9A,0x10,0xBD,0xBA,0x5B,0x26,0x99,0xC3,0x27,0x18,
-		0x6A,0xF4,0xE2,0x3C,0x1A,0x94,0x68,0x34,0xB6,0x15,0x0B,0xDA,
-		0x25,0x83,0xE9,0xCA,0x2A,0xD4,0x4C,0xE8,0xDB,0xBB,0xC2,0xDB,
-		0x04,0xDE,0x8E,0xF9,0x2E,0x8E,0xFC,0x14,0x1F,0xBE,0xCA,0xA6,
-		0x28,0x7C,0x59,0x47,0x4E,0x6B,0xC0,0x5D,0x99,0xB2,0x96,0x4F,
-		0xA0,0x90,0xC3,0xA2,0x23,0x3B,0xA1,0x86,0x51,0x5B,0xE7,0xED,
-		0x1F,0x61,0x29,0x70,0xCE,0xE2,0xD7,0xAF,0xB8,0x1B,0xDD,0x76,
-		0x21,0x70,0x48,0x1C,0xD0,0x06,0x91,0x27,0xD5,0xB0,0x5A,0xA9,
-		0x93,0xB4,0xEA,0x98,0x8D,0x8F,0xDD,0xC1,0x86,0xFF,0xB7,0xDC,
-		0x90,0xA6,0xC0,0x8F,0x4D,0xF4,0x35,0xC9,0x34,0x06,0x31,0x99,
-		0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,
-		};
-	return BN_bin2bn(RFC3526_PRIME_4096,sizeof(RFC3526_PRIME_4096),bn);
-	}
-
-/* "6144-bit MODP Group" from RFC3526, Section 6.
- *
- * The prime is: 2^6144 - 2^6080 - 1 + 2^64 * { [2^6014 pi] + 929484 }
- *
- * RFC3526 specifies a generator of 2.
- */
-
-BIGNUM *get_rfc3526_prime_6144(BIGNUM *bn)
-	{
-	static const unsigned char RFC3526_PRIME_6144[]={
-		0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xC9,0x0F,0xDA,0xA2,
-		0x21,0x68,0xC2,0x34,0xC4,0xC6,0x62,0x8B,0x80,0xDC,0x1C,0xD1,
-		0x29,0x02,0x4E,0x08,0x8A,0x67,0xCC,0x74,0x02,0x0B,0xBE,0xA6,
-		0x3B,0x13,0x9B,0x22,0x51,0x4A,0x08,0x79,0x8E,0x34,0x04,0xDD,
-		0xEF,0x95,0x19,0xB3,0xCD,0x3A,0x43,0x1B,0x30,0x2B,0x0A,0x6D,
-		0xF2,0x5F,0x14,0x37,0x4F,0xE1,0x35,0x6D,0x6D,0x51,0xC2,0x45,
-		0xE4,0x85,0xB5,0x76,0x62,0x5E,0x7E,0xC6,0xF4,0x4C,0x42,0xE9,
-		0xA6,0x37,0xED,0x6B,0x0B,0xFF,0x5C,0xB6,0xF4,0x06,0xB7,0xED,
-		0xEE,0x38,0x6B,0xFB,0x5A,0x89,0x9F,0xA5,0xAE,0x9F,0x24,0x11,
-		0x7C,0x4B,0x1F,0xE6,0x49,0x28,0x66,0x51,0xEC,0xE4,0x5B,0x3D,
-		0xC2,0x00,0x7C,0xB8,0xA1,0x63,0xBF,0x05,0x98,0xDA,0x48,0x36,
-		0x1C,0x55,0xD3,0x9A,0x69,0x16,0x3F,0xA8,0xFD,0x24,0xCF,0x5F,
-		0x83,0x65,0x5D,0x23,0xDC,0xA3,0xAD,0x96,0x1C,0x62,0xF3,0x56,
-		0x20,0x85,0x52,0xBB,0x9E,0xD5,0x29,0x07,0x70,0x96,0x96,0x6D,
-		0x67,0x0C,0x35,0x4E,0x4A,0xBC,0x98,0x04,0xF1,0x74,0x6C,0x08,
-		0xCA,0x18,0x21,0x7C,0x32,0x90,0x5E,0x46,0x2E,0x36,0xCE,0x3B,
-		0xE3,0x9E,0x77,0x2C,0x18,0x0E,0x86,0x03,0x9B,0x27,0x83,0xA2,
-		0xEC,0x07,0xA2,0x8F,0xB5,0xC5,0x5D,0xF0,0x6F,0x4C,0x52,0xC9,
-		0xDE,0x2B,0xCB,0xF6,0x95,0x58,0x17,0x18,0x39,0x95,0x49,0x7C,
-		0xEA,0x95,0x6A,0xE5,0x15,0xD2,0x26,0x18,0x98,0xFA,0x05,0x10,
-		0x15,0x72,0x8E,0x5A,0x8A,0xAA,0xC4,0x2D,0xAD,0x33,0x17,0x0D,
-		0x04,0x50,0x7A,0x33,0xA8,0x55,0x21,0xAB,0xDF,0x1C,0xBA,0x64,
-		0xEC,0xFB,0x85,0x04,0x58,0xDB,0xEF,0x0A,0x8A,0xEA,0x71,0x57,
-		0x5D,0x06,0x0C,0x7D,0xB3,0x97,0x0F,0x85,0xA6,0xE1,0xE4,0xC7,
-		0xAB,0xF5,0xAE,0x8C,0xDB,0x09,0x33,0xD7,0x1E,0x8C,0x94,0xE0,
-		0x4A,0x25,0x61,0x9D,0xCE,0xE3,0xD2,0x26,0x1A,0xD2,0xEE,0x6B,
-		0xF1,0x2F,0xFA,0x06,0xD9,0x8A,0x08,0x64,0xD8,0x76,0x02,0x73,
-		0x3E,0xC8,0x6A,0x64,0x52,0x1F,0x2B,0x18,0x17,0x7B,0x20,0x0C,
-		0xBB,0xE1,0x17,0x57,0x7A,0x61,0x5D,0x6C,0x77,0x09,0x88,0xC0,
-		0xBA,0xD9,0x46,0xE2,0x08,0xE2,0x4F,0xA0,0x74,0xE5,0xAB,0x31,
-		0x43,0xDB,0x5B,0xFC,0xE0,0xFD,0x10,0x8E,0x4B,0x82,0xD1,0x20,
-		0xA9,0x21,0x08,0x01,0x1A,0x72,0x3C,0x12,0xA7,0x87,0xE6,0xD7,
-		0x88,0x71,0x9A,0x10,0xBD,0xBA,0x5B,0x26,0x99,0xC3,0x27,0x18,
-		0x6A,0xF4,0xE2,0x3C,0x1A,0x94,0x68,0x34,0xB6,0x15,0x0B,0xDA,
-		0x25,0x83,0xE9,0xCA,0x2A,0xD4,0x4C,0xE8,0xDB,0xBB,0xC2,0xDB,
-		0x04,0xDE,0x8E,0xF9,0x2E,0x8E,0xFC,0x14,0x1F,0xBE,0xCA,0xA6,
-		0x28,0x7C,0x59,0x47,0x4E,0x6B,0xC0,0x5D,0x99,0xB2,0x96,0x4F,
-		0xA0,0x90,0xC3,0xA2,0x23,0x3B,0xA1,0x86,0x51,0x5B,0xE7,0xED,
-		0x1F,0x61,0x29,0x70,0xCE,0xE2,0xD7,0xAF,0xB8,0x1B,0xDD,0x76,
-		0x21,0x70,0x48,0x1C,0xD0,0x06,0x91,0x27,0xD5,0xB0,0x5A,0xA9,
-		0x93,0xB4,0xEA,0x98,0x8D,0x8F,0xDD,0xC1,0x86,0xFF,0xB7,0xDC,
-		0x90,0xA6,0xC0,0x8F,0x4D,0xF4,0x35,0xC9,0x34,0x02,0x84,0x92,
-		0x36,0xC3,0xFA,0xB4,0xD2,0x7C,0x70,0x26,0xC1,0xD4,0xDC,0xB2,
-		0x60,0x26,0x46,0xDE,0xC9,0x75,0x1E,0x76,0x3D,0xBA,0x37,0xBD,
-		0xF8,0xFF,0x94,0x06,0xAD,0x9E,0x53,0x0E,0xE5,0xDB,0x38,0x2F,
-		0x41,0x30,0x01,0xAE,0xB0,0x6A,0x53,0xED,0x90,0x27,0xD8,0x31,
-		0x17,0x97,0x27,0xB0,0x86,0x5A,0x89,0x18,0xDA,0x3E,0xDB,0xEB,
-		0xCF,0x9B,0x14,0xED,0x44,0xCE,0x6C,0xBA,0xCE,0xD4,0xBB,0x1B,
-		0xDB,0x7F,0x14,0x47,0xE6,0xCC,0x25,0x4B,0x33,0x20,0x51,0x51,
-		0x2B,0xD7,0xAF,0x42,0x6F,0xB8,0xF4,0x01,0x37,0x8C,0xD2,0xBF,
-		0x59,0x83,0xCA,0x01,0xC6,0x4B,0x92,0xEC,0xF0,0x32,0xEA,0x15,
-		0xD1,0x72,0x1D,0x03,0xF4,0x82,0xD7,0xCE,0x6E,0x74,0xFE,0xF6,
-		0xD5,0x5E,0x70,0x2F,0x46,0x98,0x0C,0x82,0xB5,0xA8,0x40,0x31,
-		0x90,0x0B,0x1C,0x9E,0x59,0xE7,0xC9,0x7F,0xBE,0xC7,0xE8,0xF3,
-		0x23,0xA9,0x7A,0x7E,0x36,0xCC,0x88,0xBE,0x0F,0x1D,0x45,0xB7,
-		0xFF,0x58,0x5A,0xC5,0x4B,0xD4,0x07,0xB2,0x2B,0x41,0x54,0xAA,
-		0xCC,0x8F,0x6D,0x7E,0xBF,0x48,0xE1,0xD8,0x14,0xCC,0x5E,0xD2,
-		0x0F,0x80,0x37,0xE0,0xA7,0x97,0x15,0xEE,0xF2,0x9B,0xE3,0x28,
-		0x06,0xA1,0xD5,0x8B,0xB7,0xC5,0xDA,0x76,0xF5,0x50,0xAA,0x3D,
-		0x8A,0x1F,0xBF,0xF0,0xEB,0x19,0xCC,0xB1,0xA3,0x13,0xD5,0x5C,
-		0xDA,0x56,0xC9,0xEC,0x2E,0xF2,0x96,0x32,0x38,0x7F,0xE8,0xD7,
-		0x6E,0x3C,0x04,0x68,0x04,0x3E,0x8F,0x66,0x3F,0x48,0x60,0xEE,
-		0x12,0xBF,0x2D,0x5B,0x0B,0x74,0x74,0xD6,0xE6,0x94,0xF9,0x1E,
-		0x6D,0xCC,0x40,0x24,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,
-		};
-	return BN_bin2bn(RFC3526_PRIME_6144,sizeof(RFC3526_PRIME_6144),bn);
-	}
-
-/* "8192-bit MODP Group" from RFC3526, Section 7.
- *
- * The prime is: 2^8192 - 2^8128 - 1 + 2^64 * { [2^8062 pi] + 4743158 }
- *
- * RFC3526 specifies a generator of 2.
- */
-
-BIGNUM *get_rfc3526_prime_8192(BIGNUM *bn)
-	{
-	static const unsigned char RFC3526_PRIME_8192[]={
-		0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xC9,0x0F,0xDA,0xA2,
-		0x21,0x68,0xC2,0x34,0xC4,0xC6,0x62,0x8B,0x80,0xDC,0x1C,0xD1,
-		0x29,0x02,0x4E,0x08,0x8A,0x67,0xCC,0x74,0x02,0x0B,0xBE,0xA6,
-		0x3B,0x13,0x9B,0x22,0x51,0x4A,0x08,0x79,0x8E,0x34,0x04,0xDD,
-		0xEF,0x95,0x19,0xB3,0xCD,0x3A,0x43,0x1B,0x30,0x2B,0x0A,0x6D,
-		0xF2,0x5F,0x14,0x37,0x4F,0xE1,0x35,0x6D,0x6D,0x51,0xC2,0x45,
-		0xE4,0x85,0xB5,0x76,0x62,0x5E,0x7E,0xC6,0xF4,0x4C,0x42,0xE9,
-		0xA6,0x37,0xED,0x6B,0x0B,0xFF,0x5C,0xB6,0xF4,0x06,0xB7,0xED,
-		0xEE,0x38,0x6B,0xFB,0x5A,0x89,0x9F,0xA5,0xAE,0x9F,0x24,0x11,
-		0x7C,0x4B,0x1F,0xE6,0x49,0x28,0x66,0x51,0xEC,0xE4,0x5B,0x3D,
-		0xC2,0x00,0x7C,0xB8,0xA1,0x63,0xBF,0x05,0x98,0xDA,0x48,0x36,
-		0x1C,0x55,0xD3,0x9A,0x69,0x16,0x3F,0xA8,0xFD,0x24,0xCF,0x5F,
-		0x83,0x65,0x5D,0x23,0xDC,0xA3,0xAD,0x96,0x1C,0x62,0xF3,0x56,
-		0x20,0x85,0x52,0xBB,0x9E,0xD5,0x29,0x07,0x70,0x96,0x96,0x6D,
-		0x67,0x0C,0x35,0x4E,0x4A,0xBC,0x98,0x04,0xF1,0x74,0x6C,0x08,
-		0xCA,0x18,0x21,0x7C,0x32,0x90,0x5E,0x46,0x2E,0x36,0xCE,0x3B,
-		0xE3,0x9E,0x77,0x2C,0x18,0x0E,0x86,0x03,0x9B,0x27,0x83,0xA2,
-		0xEC,0x07,0xA2,0x8F,0xB5,0xC5,0x5D,0xF0,0x6F,0x4C,0x52,0xC9,
-		0xDE,0x2B,0xCB,0xF6,0x95,0x58,0x17,0x18,0x39,0x95,0x49,0x7C,
-		0xEA,0x95,0x6A,0xE5,0x15,0xD2,0x26,0x18,0x98,0xFA,0x05,0x10,
-		0x15,0x72,0x8E,0x5A,0x8A,0xAA,0xC4,0x2D,0xAD,0x33,0x17,0x0D,
-		0x04,0x50,0x7A,0x33,0xA8,0x55,0x21,0xAB,0xDF,0x1C,0xBA,0x64,
-		0xEC,0xFB,0x85,0x04,0x58,0xDB,0xEF,0x0A,0x8A,0xEA,0x71,0x57,
-		0x5D,0x06,0x0C,0x7D,0xB3,0x97,0x0F,0x85,0xA6,0xE1,0xE4,0xC7,
-		0xAB,0xF5,0xAE,0x8C,0xDB,0x09,0x33,0xD7,0x1E,0x8C,0x94,0xE0,
-		0x4A,0x25,0x61,0x9D,0xCE,0xE3,0xD2,0x26,0x1A,0xD2,0xEE,0x6B,
-		0xF1,0x2F,0xFA,0x06,0xD9,0x8A,0x08,0x64,0xD8,0x76,0x02,0x73,
-		0x3E,0xC8,0x6A,0x64,0x52,0x1F,0x2B,0x18,0x17,0x7B,0x20,0x0C,
-		0xBB,0xE1,0x17,0x57,0x7A,0x61,0x5D,0x6C,0x77,0x09,0x88,0xC0,
-		0xBA,0xD9,0x46,0xE2,0x08,0xE2,0x4F,0xA0,0x74,0xE5,0xAB,0x31,
-		0x43,0xDB,0x5B,0xFC,0xE0,0xFD,0x10,0x8E,0x4B,0x82,0xD1,0x20,
-		0xA9,0x21,0x08,0x01,0x1A,0x72,0x3C,0x12,0xA7,0x87,0xE6,0xD7,
-		0x88,0x71,0x9A,0x10,0xBD,0xBA,0x5B,0x26,0x99,0xC3,0x27,0x18,
-		0x6A,0xF4,0xE2,0x3C,0x1A,0x94,0x68,0x34,0xB6,0x15,0x0B,0xDA,
-		0x25,0x83,0xE9,0xCA,0x2A,0xD4,0x4C,0xE8,0xDB,0xBB,0xC2,0xDB,
-		0x04,0xDE,0x8E,0xF9,0x2E,0x8E,0xFC,0x14,0x1F,0xBE,0xCA,0xA6,
-		0x28,0x7C,0x59,0x47,0x4E,0x6B,0xC0,0x5D,0x99,0xB2,0x96,0x4F,
-		0xA0,0x90,0xC3,0xA2,0x23,0x3B,0xA1,0x86,0x51,0x5B,0xE7,0xED,
-		0x1F,0x61,0x29,0x70,0xCE,0xE2,0xD7,0xAF,0xB8,0x1B,0xDD,0x76,
-		0x21,0x70,0x48,0x1C,0xD0,0x06,0x91,0x27,0xD5,0xB0,0x5A,0xA9,
-		0x93,0xB4,0xEA,0x98,0x8D,0x8F,0xDD,0xC1,0x86,0xFF,0xB7,0xDC,
-		0x90,0xA6,0xC0,0x8F,0x4D,0xF4,0x35,0xC9,0x34,0x02,0x84,0x92,
-		0x36,0xC3,0xFA,0xB4,0xD2,0x7C,0x70,0x26,0xC1,0xD4,0xDC,0xB2,
-		0x60,0x26,0x46,0xDE,0xC9,0x75,0x1E,0x76,0x3D,0xBA,0x37,0xBD,
-		0xF8,0xFF,0x94,0x06,0xAD,0x9E,0x53,0x0E,0xE5,0xDB,0x38,0x2F,
-		0x41,0x30,0x01,0xAE,0xB0,0x6A,0x53,0xED,0x90,0x27,0xD8,0x31,
-		0x17,0x97,0x27,0xB0,0x86,0x5A,0x89,0x18,0xDA,0x3E,0xDB,0xEB,
-		0xCF,0x9B,0x14,0xED,0x44,0xCE,0x6C,0xBA,0xCE,0xD4,0xBB,0x1B,
-		0xDB,0x7F,0x14,0x47,0xE6,0xCC,0x25,0x4B,0x33,0x20,0x51,0x51,
-		0x2B,0xD7,0xAF,0x42,0x6F,0xB8,0xF4,0x01,0x37,0x8C,0xD2,0xBF,
-		0x59,0x83,0xCA,0x01,0xC6,0x4B,0x92,0xEC,0xF0,0x32,0xEA,0x15,
-		0xD1,0x72,0x1D,0x03,0xF4,0x82,0xD7,0xCE,0x6E,0x74,0xFE,0xF6,
-		0xD5,0x5E,0x70,0x2F,0x46,0x98,0x0C,0x82,0xB5,0xA8,0x40,0x31,
-		0x90,0x0B,0x1C,0x9E,0x59,0xE7,0xC9,0x7F,0xBE,0xC7,0xE8,0xF3,
-		0x23,0xA9,0x7A,0x7E,0x36,0xCC,0x88,0xBE,0x0F,0x1D,0x45,0xB7,
-		0xFF,0x58,0x5A,0xC5,0x4B,0xD4,0x07,0xB2,0x2B,0x41,0x54,0xAA,
-		0xCC,0x8F,0x6D,0x7E,0xBF,0x48,0xE1,0xD8,0x14,0xCC,0x5E,0xD2,
-		0x0F,0x80,0x37,0xE0,0xA7,0x97,0x15,0xEE,0xF2,0x9B,0xE3,0x28,
-		0x06,0xA1,0xD5,0x8B,0xB7,0xC5,0xDA,0x76,0xF5,0x50,0xAA,0x3D,
-		0x8A,0x1F,0xBF,0xF0,0xEB,0x19,0xCC,0xB1,0xA3,0x13,0xD5,0x5C,
-		0xDA,0x56,0xC9,0xEC,0x2E,0xF2,0x96,0x32,0x38,0x7F,0xE8,0xD7,
-		0x6E,0x3C,0x04,0x68,0x04,0x3E,0x8F,0x66,0x3F,0x48,0x60,0xEE,
-		0x12,0xBF,0x2D,0x5B,0x0B,0x74,0x74,0xD6,0xE6,0x94,0xF9,0x1E,
-		0x6D,0xBE,0x11,0x59,0x74,0xA3,0x92,0x6F,0x12,0xFE,0xE5,0xE4,
-		0x38,0x77,0x7C,0xB6,0xA9,0x32,0xDF,0x8C,0xD8,0xBE,0xC4,0xD0,
-		0x73,0xB9,0x31,0xBA,0x3B,0xC8,0x32,0xB6,0x8D,0x9D,0xD3,0x00,
-		0x74,0x1F,0xA7,0xBF,0x8A,0xFC,0x47,0xED,0x25,0x76,0xF6,0x93,
-		0x6B,0xA4,0x24,0x66,0x3A,0xAB,0x63,0x9C,0x5A,0xE4,0xF5,0x68,
-		0x34,0x23,0xB4,0x74,0x2B,0xF1,0xC9,0x78,0x23,0x8F,0x16,0xCB,
-		0xE3,0x9D,0x65,0x2D,0xE3,0xFD,0xB8,0xBE,0xFC,0x84,0x8A,0xD9,
-		0x22,0x22,0x2E,0x04,0xA4,0x03,0x7C,0x07,0x13,0xEB,0x57,0xA8,
-		0x1A,0x23,0xF0,0xC7,0x34,0x73,0xFC,0x64,0x6C,0xEA,0x30,0x6B,
-		0x4B,0xCB,0xC8,0x86,0x2F,0x83,0x85,0xDD,0xFA,0x9D,0x4B,0x7F,
-		0xA2,0xC0,0x87,0xE8,0x79,0x68,0x33,0x03,0xED,0x5B,0xDD,0x3A,
-		0x06,0x2B,0x3C,0xF5,0xB3,0xA2,0x78,0xA6,0x6D,0x2A,0x13,0xF8,
-		0x3F,0x44,0xF8,0x2D,0xDF,0x31,0x0E,0xE0,0x74,0xAB,0x6A,0x36,
-		0x45,0x97,0xE8,0x99,0xA0,0x25,0x5D,0xC1,0x64,0xF3,0x1C,0xC5,
-		0x08,0x46,0x85,0x1D,0xF9,0xAB,0x48,0x19,0x5D,0xED,0x7E,0xA1,
-		0xB1,0xD5,0x10,0xBD,0x7E,0xE7,0x4D,0x73,0xFA,0xF3,0x6B,0xC3,
-		0x1E,0xCF,0xA2,0x68,0x35,0x90,0x46,0xF4,0xEB,0x87,0x9F,0x92,
-		0x40,0x09,0x43,0x8B,0x48,0x1C,0x6C,0xD7,0x88,0x9A,0x00,0x2E,
-		0xD5,0xEE,0x38,0x2B,0xC9,0x19,0x0D,0xA6,0xFC,0x02,0x6E,0x47,
-		0x95,0x58,0xE4,0x47,0x56,0x77,0xE9,0xAA,0x9E,0x30,0x50,0xE2,
-		0x76,0x56,0x94,0xDF,0xC8,0x1F,0x56,0xE8,0x80,0xB9,0x6E,0x71,
-		0x60,0xC9,0x80,0xDD,0x98,0xED,0xD3,0xDF,0xFF,0xFF,0xFF,0xFF,
-		0xFF,0xFF,0xFF,0xFF,
-		};
-	return BN_bin2bn(RFC3526_PRIME_8192,sizeof(RFC3526_PRIME_8192),bn);
-	}
-
diff --git a/crypto/openssl/crypto/bn/bn_ctx.c b/crypto/openssl/crypto/bn/bn_ctx.c
deleted file mode 100644
index b3452f1a91e3..000000000000
--- a/crypto/openssl/crypto/bn/bn_ctx.c
+++ /dev/null
@@ -1,454 +0,0 @@
-/* crypto/bn/bn_ctx.c */
-/* Written by Ulf Moeller for the OpenSSL project. */
-/* ====================================================================
- * Copyright (c) 1998-2004 The OpenSSL Project.  All rights reserved.
- *
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions
- * are met:
- *
- * 1. Redistributions of source code must retain the above copyright
- *    notice, this list of conditions and the following disclaimer. 
- *
- * 2. Redistributions in binary form must reproduce the above copyright
- *    notice, this list of conditions and the following disclaimer in
- *    the documentation and/or other materials provided with the
- *    distribution.
- *
- * 3. All advertising materials mentioning features or use of this
- *    software must display the following acknowledgment:
- *    "This product includes software developed by the OpenSSL Project
- *    for use in the OpenSSL Toolkit. (http://www.openssl.org/)"
- *
- * 4. The names "OpenSSL Toolkit" and "OpenSSL Project" must not be used to
- *    endorse or promote products derived from this software without
- *    prior written permission. For written permission, please contact
- *    openssl-core@openssl.org.
- *
- * 5. Products derived from this software may not be called "OpenSSL"
- *    nor may "OpenSSL" appear in their names without prior written
- *    permission of the OpenSSL Project.
- *
- * 6. Redistributions of any form whatsoever must retain the following
- *    acknowledgment:
- *    "This product includes software developed by the OpenSSL Project
- *    for use in the OpenSSL Toolkit (http://www.openssl.org/)"
- *
- * THIS SOFTWARE IS PROVIDED BY THE OpenSSL PROJECT ``AS IS'' AND ANY
- * EXPRESSED OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
- * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR
- * PURPOSE ARE DISCLAIMED.  IN NO EVENT SHALL THE OpenSSL PROJECT OR
- * ITS CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
- * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
- * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
- * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
- * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
- * STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
- * ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED
- * OF THE POSSIBILITY OF SUCH DAMAGE.
- * ====================================================================
- *
- * This product includes cryptographic software written by Eric Young
- * (eay@cryptsoft.com).  This product includes software written by Tim
- * Hudson (tjh@cryptsoft.com).
- *
- */
-
-#if !defined(BN_CTX_DEBUG) && !defined(BN_DEBUG)
-#ifndef NDEBUG
-#define NDEBUG
-#endif
-#endif
-
-#include <stdio.h>
-#include <assert.h>
-
-#include "cryptlib.h"
-#include "bn_lcl.h"
-
-/* TODO list
- *
- * 1. Check a bunch of "(words+1)" type hacks in various bignum functions and
- * check they can be safely removed.
- *  - Check +1 and other ugliness in BN_from_montgomery()
- *
- * 2. Consider allowing a BN_new_ex() that, at least, lets you specify an
- * appropriate 'block' size that will be honoured by bn_expand_internal() to
- * prevent piddly little reallocations. OTOH, profiling bignum expansions in
- * BN_CTX doesn't show this to be a big issue.
- */
-
-/* How many bignums are in each "pool item"; */
-#define BN_CTX_POOL_SIZE	16
-/* The stack frame info is resizing, set a first-time expansion size; */
-#define BN_CTX_START_FRAMES	32
-
-/***********/
-/* BN_POOL */
-/***********/
-
-/* A bundle of bignums that can be linked with other bundles */
-typedef struct bignum_pool_item
-	{
-	/* The bignum values */
-	BIGNUM vals[BN_CTX_POOL_SIZE];
-	/* Linked-list admin */
-	struct bignum_pool_item *prev, *next;
-	} BN_POOL_ITEM;
-/* A linked-list of bignums grouped in bundles */
-typedef struct bignum_pool
-	{
-	/* Linked-list admin */
-	BN_POOL_ITEM *head, *current, *tail;
-	/* Stack depth and allocation size */
-	unsigned used, size;
-	} BN_POOL;
-static void		BN_POOL_init(BN_POOL *);
-static void		BN_POOL_finish(BN_POOL *);
-#ifndef OPENSSL_NO_DEPRECATED
-static void		BN_POOL_reset(BN_POOL *);
-#endif
-static BIGNUM *		BN_POOL_get(BN_POOL *);
-static void		BN_POOL_release(BN_POOL *, unsigned int);
-
-/************/
-/* BN_STACK */
-/************/
-
-/* A wrapper to manage the "stack frames" */
-typedef struct bignum_ctx_stack
-	{
-	/* Array of indexes into the bignum stack */
-	unsigned int *indexes;
-	/* Number of stack frames, and the size of the allocated array */
-	unsigned int depth, size;
-	} BN_STACK;
-static void		BN_STACK_init(BN_STACK *);
-static void		BN_STACK_finish(BN_STACK *);
-#ifndef OPENSSL_NO_DEPRECATED
-static void		BN_STACK_reset(BN_STACK *);
-#endif
-static int		BN_STACK_push(BN_STACK *, unsigned int);
-static unsigned int	BN_STACK_pop(BN_STACK *);
-
-/**********/
-/* BN_CTX */
-/**********/
-
-/* The opaque BN_CTX type */
-struct bignum_ctx
-	{
-	/* The bignum bundles */
-	BN_POOL pool;
-	/* The "stack frames", if you will */
-	BN_STACK stack;
-	/* The number of bignums currently assigned */
-	unsigned int used;
-	/* Depth of stack overflow */
-	int err_stack;
-	/* Block "gets" until an "end" (compatibility behaviour) */
-	int too_many;
-	};
-
-/* Enable this to find BN_CTX bugs */
-#ifdef BN_CTX_DEBUG
-static const char *ctxdbg_cur = NULL;
-static void ctxdbg(BN_CTX *ctx)
-	{
-	unsigned int bnidx = 0, fpidx = 0;
-	BN_POOL_ITEM *item = ctx->pool.head;
-	BN_STACK *stack = &ctx->stack;
-	fprintf(stderr,"(%08x): ", (unsigned int)ctx);
-	while(bnidx < ctx->used)
-		{
-		fprintf(stderr,"%02x ", item->vals[bnidx++ % BN_CTX_POOL_SIZE].dmax);
-		if(!(bnidx % BN_CTX_POOL_SIZE))
-			item = item->next;
-		}
-	fprintf(stderr,"\n");
-	bnidx = 0;
-	fprintf(stderr,"          : ");
-	while(fpidx < stack->depth)
-		{
-		while(bnidx++ < stack->indexes[fpidx])
-			fprintf(stderr,"   ");
-		fprintf(stderr,"^^ ");
-		bnidx++;
-		fpidx++;
-		}
-	fprintf(stderr,"\n");
-	}
-#define CTXDBG_ENTRY(str, ctx)	do { \
-				ctxdbg_cur = (str); \
-				fprintf(stderr,"Starting %s\n", ctxdbg_cur); \
-				ctxdbg(ctx); \
-				} while(0)
-#define CTXDBG_EXIT(ctx)	do { \
-				fprintf(stderr,"Ending %s\n", ctxdbg_cur); \
-				ctxdbg(ctx); \
-				} while(0)
-#define CTXDBG_RET(ctx,ret)
-#else
-#define CTXDBG_ENTRY(str, ctx)
-#define CTXDBG_EXIT(ctx)
-#define CTXDBG_RET(ctx,ret)
-#endif
-
-/* This function is an evil legacy and should not be used. This implementation
- * is WYSIWYG, though I've done my best. */
-#ifndef OPENSSL_NO_DEPRECATED
-void BN_CTX_init(BN_CTX *ctx)
-	{
-	/* Assume the caller obtained the context via BN_CTX_new() and so is
-	 * trying to reset it for use. Nothing else makes sense, least of all
-	 * binary compatibility from a time when they could declare a static
-	 * variable. */
-	BN_POOL_reset(&ctx->pool);
-	BN_STACK_reset(&ctx->stack);
-	ctx->used = 0;
-	ctx->err_stack = 0;
-	ctx->too_many = 0;
-	}
-#endif
-
-BN_CTX *BN_CTX_new(void)
-	{
-	BN_CTX *ret = OPENSSL_malloc(sizeof(BN_CTX));
-	if(!ret)
-		{
-		BNerr(BN_F_BN_CTX_NEW,ERR_R_MALLOC_FAILURE);
-		return NULL;
-		}
-	/* Initialise the structure */
-	BN_POOL_init(&ret->pool);
-	BN_STACK_init(&ret->stack);
-	ret->used = 0;
-	ret->err_stack = 0;
-	ret->too_many = 0;
-	return ret;
-	}
-
-void BN_CTX_free(BN_CTX *ctx)
-	{
-	if (ctx == NULL)
-		return;
-#ifdef BN_CTX_DEBUG
-	{
-	BN_POOL_ITEM *pool = ctx->pool.head;
-	fprintf(stderr,"BN_CTX_free, stack-size=%d, pool-bignums=%d\n",
-		ctx->stack.size, ctx->pool.size);
-	fprintf(stderr,"dmaxs: ");
-	while(pool) {
-		unsigned loop = 0;
-		while(loop < BN_CTX_POOL_SIZE)
-			fprintf(stderr,"%02x ", pool->vals[loop++].dmax);
-		pool = pool->next;
-	}
-	fprintf(stderr,"\n");
-	}
-#endif
-	BN_STACK_finish(&ctx->stack);
-	BN_POOL_finish(&ctx->pool);
-	OPENSSL_free(ctx);
-	}
-
-void BN_CTX_start(BN_CTX *ctx)
-	{
-	CTXDBG_ENTRY("BN_CTX_start", ctx);
-	/* If we're already overflowing ... */
-	if(ctx->err_stack || ctx->too_many)
-		ctx->err_stack++;
-	/* (Try to) get a new frame pointer */
-	else if(!BN_STACK_push(&ctx->stack, ctx->used))
-		{
-		BNerr(BN_F_BN_CTX_START,BN_R_TOO_MANY_TEMPORARY_VARIABLES);
-		ctx->err_stack++;
-		}
-	CTXDBG_EXIT(ctx);
-	}
-
-void BN_CTX_end(BN_CTX *ctx)
-	{
-	CTXDBG_ENTRY("BN_CTX_end", ctx);
-	if(ctx->err_stack)
-		ctx->err_stack--;
-	else
-		{
-		unsigned int fp = BN_STACK_pop(&ctx->stack);
-		/* Does this stack frame have anything to release? */
-		if(fp < ctx->used)
-			BN_POOL_release(&ctx->pool, ctx->used - fp);
-		ctx->used = fp;
-		/* Unjam "too_many" in case "get" had failed */
-		ctx->too_many = 0;
-		}
-	CTXDBG_EXIT(ctx);
-	}
-
-BIGNUM *BN_CTX_get(BN_CTX *ctx)
-	{
-	BIGNUM *ret;
-	CTXDBG_ENTRY("BN_CTX_get", ctx);
-	if(ctx->err_stack || ctx->too_many) return NULL;
-	if((ret = BN_POOL_get(&ctx->pool)) == NULL)
-		{
-		/* Setting too_many prevents repeated "get" attempts from
-		 * cluttering the error stack. */
-		ctx->too_many = 1;
-		BNerr(BN_F_BN_CTX_GET,BN_R_TOO_MANY_TEMPORARY_VARIABLES);
-		return NULL;
-		}
-	/* OK, make sure the returned bignum is "zero" */
-	BN_zero(ret);
-	ctx->used++;
-	CTXDBG_RET(ctx, ret);
-	return ret;
-	}
-
-/************/
-/* BN_STACK */
-/************/
-
-static void BN_STACK_init(BN_STACK *st)
-	{
-	st->indexes = NULL;
-	st->depth = st->size = 0;
-	}
-
-static void BN_STACK_finish(BN_STACK *st)
-	{
-	if(st->size) OPENSSL_free(st->indexes);
-	}
-
-#ifndef OPENSSL_NO_DEPRECATED
-static void BN_STACK_reset(BN_STACK *st)
-	{
-	st->depth = 0;
-	}
-#endif
-
-static int BN_STACK_push(BN_STACK *st, unsigned int idx)
-	{
-	if(st->depth == st->size)
-		/* Need to expand */
-		{
-		unsigned int newsize = (st->size ?
-				(st->size * 3 / 2) : BN_CTX_START_FRAMES);
-		unsigned int *newitems = OPENSSL_malloc(newsize *
-						sizeof(unsigned int));
-		if(!newitems) return 0;
-		if(st->depth)
-			memcpy(newitems, st->indexes, st->depth *
-						sizeof(unsigned int));
-		if(st->size) OPENSSL_free(st->indexes);
-		st->indexes = newitems;
-		st->size = newsize;
-		}
-	st->indexes[(st->depth)++] = idx;
-	return 1;
-	}
-
-static unsigned int BN_STACK_pop(BN_STACK *st)
-	{
-	return st->indexes[--(st->depth)];
-	}
-
-/***********/
-/* BN_POOL */
-/***********/
-
-static void BN_POOL_init(BN_POOL *p)
-	{
-	p->head = p->current = p->tail = NULL;
-	p->used = p->size = 0;
-	}
-
-static void BN_POOL_finish(BN_POOL *p)
-	{
-	while(p->head)
-		{
-		unsigned int loop = 0;
-		BIGNUM *bn = p->head->vals;
-		while(loop++ < BN_CTX_POOL_SIZE)
-			{
-			if(bn->d) BN_clear_free(bn);
-			bn++;
-			}
-		p->current = p->head->next;
-		OPENSSL_free(p->head);
-		p->head = p->current;
-		}
-	}
-
-#ifndef OPENSSL_NO_DEPRECATED
-static void BN_POOL_reset(BN_POOL *p)
-	{
-	BN_POOL_ITEM *item = p->head;
-	while(item)
-		{
-		unsigned int loop = 0;
-		BIGNUM *bn = item->vals;
-		while(loop++ < BN_CTX_POOL_SIZE)
-			{
-			if(bn->d) BN_clear(bn);
-			bn++;
-			}
-		item = item->next;
-		}
-	p->current = p->head;
-	p->used = 0;
-	}
-#endif
-
-static BIGNUM *BN_POOL_get(BN_POOL *p)
-	{
-	if(p->used == p->size)
-		{
-		BIGNUM *bn;
-		unsigned int loop = 0;
-		BN_POOL_ITEM *item = OPENSSL_malloc(sizeof(BN_POOL_ITEM));
-		if(!item) return NULL;
-		/* Initialise the structure */
-		bn = item->vals;
-		while(loop++ < BN_CTX_POOL_SIZE)
-			BN_init(bn++);
-		item->prev = p->tail;
-		item->next = NULL;
-		/* Link it in */
-		if(!p->head)
-			p->head = p->current = p->tail = item;
-		else
-			{
-			p->tail->next = item;
-			p->tail = item;
-			p->current = item;
-			}
-		p->size += BN_CTX_POOL_SIZE;
-		p->used++;
-		/* Return the first bignum from the new pool */
-		return item->vals;
-		}
-	if(!p->used)
-		p->current = p->head;
-	else if((p->used % BN_CTX_POOL_SIZE) == 0)
-		p->current = p->current->next;
-	return p->current->vals + ((p->used++) % BN_CTX_POOL_SIZE);
-	}
-
-static void BN_POOL_release(BN_POOL *p, unsigned int num)
-	{
-	unsigned int offset = (p->used - 1) % BN_CTX_POOL_SIZE;
-	p->used -= num;
-	while(num--)
-		{
-		bn_check_top(p->current->vals + offset);
-		if(!offset)
-			{
-			offset = BN_CTX_POOL_SIZE - 1;
-			p->current = p->current->prev;
-			}
-		else
-			offset--;
-		}
-	}
-
diff --git a/crypto/openssl/crypto/bn/bn_depr.c b/crypto/openssl/crypto/bn/bn_depr.c
deleted file mode 100644
index 27535e4fca00..000000000000
--- a/crypto/openssl/crypto/bn/bn_depr.c
+++ /dev/null
@@ -1,112 +0,0 @@
-/* crypto/bn/bn_depr.c */
-/* ====================================================================
- * Copyright (c) 1998-2002 The OpenSSL Project.  All rights reserved.
- *
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions
- * are met:
- *
- * 1. Redistributions of source code must retain the above copyright
- *    notice, this list of conditions and the following disclaimer. 
- *
- * 2. Redistributions in binary form must reproduce the above copyright
- *    notice, this list of conditions and the following disclaimer in
- *    the documentation and/or other materials provided with the
- *    distribution.
- *
- * 3. All advertising materials mentioning features or use of this
- *    software must display the following acknowledgment:
- *    "This product includes software developed by the OpenSSL Project
- *    for use in the OpenSSL Toolkit. (http://www.openssl.org/)"
- *
- * 4. The names "OpenSSL Toolkit" and "OpenSSL Project" must not be used to
- *    endorse or promote products derived from this software without
- *    prior written permission. For written permission, please contact
- *    openssl-core@openssl.org.
- *
- * 5. Products derived from this software may not be called "OpenSSL"
- *    nor may "OpenSSL" appear in their names without prior written
- *    permission of the OpenSSL Project.
- *
- * 6. Redistributions of any form whatsoever must retain the following
- *    acknowledgment:
- *    "This product includes software developed by the OpenSSL Project
- *    for use in the OpenSSL Toolkit (http://www.openssl.org/)"
- *
- * THIS SOFTWARE IS PROVIDED BY THE OpenSSL PROJECT ``AS IS'' AND ANY
- * EXPRESSED OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
- * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR
- * PURPOSE ARE DISCLAIMED.  IN NO EVENT SHALL THE OpenSSL PROJECT OR
- * ITS CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
- * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
- * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
- * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
- * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
- * STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
- * ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED
- * OF THE POSSIBILITY OF SUCH DAMAGE.
- * ====================================================================
- *
- * This product includes cryptographic software written by Eric Young
- * (eay@cryptsoft.com).  This product includes software written by Tim
- * Hudson (tjh@cryptsoft.com).
- *
- */
-
-/* Support for deprecated functions goes here - static linkage will only slurp
- * this code if applications are using them directly. */
-
-#include <stdio.h>
-#include <time.h>
-#include "cryptlib.h"
-#include "bn_lcl.h"
-#include <openssl/rand.h>
-
-static void *dummy=&dummy;
-
-#ifndef OPENSSL_NO_DEPRECATED
-BIGNUM *BN_generate_prime(BIGNUM *ret, int bits, int safe,
-	const BIGNUM *add, const BIGNUM *rem,
-	void (*callback)(int,int,void *), void *cb_arg)
-	{
-	BN_GENCB cb;
-	BIGNUM *rnd=NULL;
-	int found = 0;
-
-	BN_GENCB_set_old(&cb, callback, cb_arg);
-
-	if (ret == NULL)
-		{
-		if ((rnd=BN_new()) == NULL) goto err;
-		}
-	else
-		rnd=ret;
-	if(!BN_generate_prime_ex(rnd, bits, safe, add, rem, &cb))
-		goto err;
-
-	/* we have a prime :-) */
-	found = 1;
-err:
-	if (!found && (ret == NULL) && (rnd != NULL)) BN_free(rnd);
-	return(found ? rnd : NULL);
-	}
-
-int BN_is_prime(const BIGNUM *a, int checks, void (*callback)(int,int,void *),
-	BN_CTX *ctx_passed, void *cb_arg)
-	{
-	BN_GENCB cb;
-	BN_GENCB_set_old(&cb, callback, cb_arg);
-	return BN_is_prime_ex(a, checks, ctx_passed, &cb);
-	}
-
-int BN_is_prime_fasttest(const BIGNUM *a, int checks,
-		void (*callback)(int,int,void *),
-		BN_CTX *ctx_passed, void *cb_arg,
-		int do_trial_division)
-	{
-	BN_GENCB cb;
-	BN_GENCB_set_old(&cb, callback, cb_arg);
-	return BN_is_prime_fasttest_ex(a, checks, ctx_passed,
-				do_trial_division, &cb);
-	}
-#endif
diff --git a/crypto/openssl/crypto/bn/bn_div.c b/crypto/openssl/crypto/bn/bn_div.c
deleted file mode 100644
index 2857f44861a7..000000000000
--- a/crypto/openssl/crypto/bn/bn_div.c
+++ /dev/null
@@ -1,400 +0,0 @@
-/* crypto/bn/bn_div.c */
-/* Copyright (C) 1995-1998 Eric Young (eay@cryptsoft.com)
- * All rights reserved.
- *
- * This package is an SSL implementation written
- * by Eric Young (eay@cryptsoft.com).
- * The implementation was written so as to conform with Netscapes SSL.
- * 
- * This library is free for commercial and non-commercial use as long as
- * the following conditions are aheared to.  The following conditions
- * apply to all code found in this distribution, be it the RC4, RSA,
- * lhash, DES, etc., code; not just the SSL code.  The SSL documentation
- * included with this distribution is covered by the same copyright terms
- * except that the holder is Tim Hudson (tjh@cryptsoft.com).
- * 
- * Copyright remains Eric Young's, and as such any Copyright notices in
- * the code are not to be removed.
- * If this package is used in a product, Eric Young should be given attribution
- * as the author of the parts of the library used.
- * This can be in the form of a textual message at program startup or
- * in documentation (online or textual) provided with the package.
- * 
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions
- * are met:
- * 1. Redistributions of source code must retain the copyright
- *    notice, this list of conditions and the following disclaimer.
- * 2. Redistributions in binary form must reproduce the above copyright
- *    notice, this list of conditions and the following disclaimer in the
- *    documentation and/or other materials provided with the distribution.
- * 3. All advertising materials mentioning features or use of this software
- *    must display the following acknowledgement:
- *    "This product includes cryptographic software written by
- *     Eric Young (eay@cryptsoft.com)"
- *    The word 'cryptographic' can be left out if the rouines from the library
- *    being used are not cryptographic related :-).
- * 4. If you include any Windows specific code (or a derivative thereof) from 
- *    the apps directory (application code) you must include an acknowledgement:
- *    "This product includes software written by Tim Hudson (tjh@cryptsoft.com)"
- * 
- * THIS SOFTWARE IS PROVIDED BY ERIC YOUNG ``AS IS'' AND
- * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
- * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
- * ARE DISCLAIMED.  IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE
- * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
- * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
- * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
- * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
- * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
- * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
- * SUCH DAMAGE.
- * 
- * The licence and distribution terms for any publically available version or
- * derivative of this code cannot be changed.  i.e. this code cannot simply be
- * copied and put under another distribution licence
- * [including the GNU Public Licence.]
- */
-
-#include <stdio.h>
-#include <openssl/bn.h>
-#include "cryptlib.h"
-#include "bn_lcl.h"
-
-
-/* The old slow way */
-#if 0
-int BN_div(BIGNUM *dv, BIGNUM *rem, const BIGNUM *m, const BIGNUM *d,
-	   BN_CTX *ctx)
-	{
-	int i,nm,nd;
-	int ret = 0;
-	BIGNUM *D;
-
-	bn_check_top(m);
-	bn_check_top(d);
-	if (BN_is_zero(d))
-		{
-		BNerr(BN_F_BN_DIV,BN_R_DIV_BY_ZERO);
-		return(0);
-		}
-
-	if (BN_ucmp(m,d) < 0)
-		{
-		if (rem != NULL)
-			{ if (BN_copy(rem,m) == NULL) return(0); }
-		if (dv != NULL) BN_zero(dv);
-		return(1);
-		}
-
-	BN_CTX_start(ctx);
-	D = BN_CTX_get(ctx);
-	if (dv == NULL) dv = BN_CTX_get(ctx);
-	if (rem == NULL) rem = BN_CTX_get(ctx);
-	if (D == NULL || dv == NULL || rem == NULL)
-		goto end;
-
-	nd=BN_num_bits(d);
-	nm=BN_num_bits(m);
-	if (BN_copy(D,d) == NULL) goto end;
-	if (BN_copy(rem,m) == NULL) goto end;
-
-	/* The next 2 are needed so we can do a dv->d[0]|=1 later
-	 * since BN_lshift1 will only work once there is a value :-) */
-	BN_zero(dv);
-	bn_wexpand(dv,1);
-	dv->top=1;
-
-	if (!BN_lshift(D,D,nm-nd)) goto end;
-	for (i=nm-nd; i>=0; i--)
-		{
-		if (!BN_lshift1(dv,dv)) goto end;
-		if (BN_ucmp(rem,D) >= 0)
-			{
-			dv->d[0]|=1;
-			if (!BN_usub(rem,rem,D)) goto end;
-			}
-/* CAN IMPROVE (and have now :=) */
-		if (!BN_rshift1(D,D)) goto end;
-		}
-	rem->neg=BN_is_zero(rem)?0:m->neg;
-	dv->neg=m->neg^d->neg;
-	ret = 1;
- end:
-	BN_CTX_end(ctx);
-	return(ret);
-	}
-
-#else
-
-#if !defined(OPENSSL_NO_ASM) && !defined(OPENSSL_NO_INLINE_ASM) \
-    && !defined(PEDANTIC) && !defined(BN_DIV3W)
-# if defined(__GNUC__) && __GNUC__>=2
-#  if defined(__i386) || defined (__i386__)
-   /*
-    * There were two reasons for implementing this template:
-    * - GNU C generates a call to a function (__udivdi3 to be exact)
-    *   in reply to ((((BN_ULLONG)n0)<<BN_BITS2)|n1)/d0 (I fail to
-    *   understand why...);
-    * - divl doesn't only calculate quotient, but also leaves
-    *   remainder in %edx which we can definitely use here:-)
-    *
-    *					<appro@fy.chalmers.se>
-    */
-#  define bn_div_words(n0,n1,d0)		\
-	({  asm volatile (			\
-		"divl	%4"			\
-		: "=a"(q), "=d"(rem)		\
-		: "a"(n1), "d"(n0), "g"(d0)	\
-		: "cc");			\
-	    q;					\
-	})
-#  define REMAINDER_IS_ALREADY_CALCULATED
-#  elif defined(__x86_64) && defined(SIXTY_FOUR_BIT_LONG)
-   /*
-    * Same story here, but it's 128-bit by 64-bit division. Wow!
-    *					<appro@fy.chalmers.se>
-    */
-#  define bn_div_words(n0,n1,d0)		\
-	({  asm volatile (			\
-		"divq	%4"			\
-		: "=a"(q), "=d"(rem)		\
-		: "a"(n1), "d"(n0), "g"(d0)	\
-		: "cc");			\
-	    q;					\
-	})
-#  define REMAINDER_IS_ALREADY_CALCULATED
-#  endif /* __<cpu> */
-# endif /* __GNUC__ */
-#endif /* OPENSSL_NO_ASM */
-
-
-/* BN_div computes  dv := num / divisor,  rounding towards zero, and sets up
- * rm  such that  dv*divisor + rm = num  holds.
- * Thus:
- *     dv->neg == num->neg ^ divisor->neg  (unless the result is zero)
- *     rm->neg == num->neg                 (unless the remainder is zero)
- * If 'dv' or 'rm' is NULL, the respective value is not returned.
- */
-int BN_div(BIGNUM *dv, BIGNUM *rm, const BIGNUM *num, const BIGNUM *divisor,
-	   BN_CTX *ctx)
-	{
-	int norm_shift,i,loop;
-	BIGNUM *tmp,wnum,*snum,*sdiv,*res;
-	BN_ULONG *resp,*wnump;
-	BN_ULONG d0,d1;
-	int num_n,div_n;
-
-	bn_check_top(dv);
-	bn_check_top(rm);
-	bn_check_top(num);
-	bn_check_top(divisor);
-
-	if (BN_is_zero(divisor))
-		{
-		BNerr(BN_F_BN_DIV,BN_R_DIV_BY_ZERO);
-		return(0);
-		}
-
-	if (BN_ucmp(num,divisor) < 0)
-		{
-		if (rm != NULL)
-			{ if (BN_copy(rm,num) == NULL) return(0); }
-		if (dv != NULL) BN_zero(dv);
-		return(1);
-		}
-
-	BN_CTX_start(ctx);
-	tmp=BN_CTX_get(ctx);
-	snum=BN_CTX_get(ctx);
-	sdiv=BN_CTX_get(ctx);
-	if (dv == NULL)
-		res=BN_CTX_get(ctx);
-	else	res=dv;
-	if (sdiv == NULL || res == NULL) goto err;
-
-	/* First we normalise the numbers */
-	norm_shift=BN_BITS2-((BN_num_bits(divisor))%BN_BITS2);
-	if (!(BN_lshift(sdiv,divisor,norm_shift))) goto err;
-	sdiv->neg=0;
-	norm_shift+=BN_BITS2;
-	if (!(BN_lshift(snum,num,norm_shift))) goto err;
-	snum->neg=0;
-	div_n=sdiv->top;
-	num_n=snum->top;
-	loop=num_n-div_n;
-	/* Lets setup a 'window' into snum
-	 * This is the part that corresponds to the current
-	 * 'area' being divided */
-	wnum.neg   = 0;
-	wnum.d     = &(snum->d[loop]);
-	wnum.top   = div_n;
-	/* only needed when BN_ucmp messes up the values between top and max */
-	wnum.dmax  = snum->dmax - loop; /* so we don't step out of bounds */
-
-	/* Get the top 2 words of sdiv */
-	/* div_n=sdiv->top; */
-	d0=sdiv->d[div_n-1];
-	d1=(div_n == 1)?0:sdiv->d[div_n-2];
-
-	/* pointer to the 'top' of snum */
-	wnump= &(snum->d[num_n-1]);
-
-	/* Setup to 'res' */
-	res->neg= (num->neg^divisor->neg);
-	if (!bn_wexpand(res,(loop+1))) goto err;
-	res->top=loop;
-	resp= &(res->d[loop-1]);
-
-	/* space for temp */
-	if (!bn_wexpand(tmp,(div_n+1))) goto err;
-
-	if (BN_ucmp(&wnum,sdiv) >= 0)
-		{
-		/* If BN_DEBUG_RAND is defined BN_ucmp changes (via
-		 * bn_pollute) the const bignum arguments =>
-		 * clean the values between top and max again */
-		bn_clear_top2max(&wnum);
-		bn_sub_words(wnum.d, wnum.d, sdiv->d, div_n);
-		*resp=1;
-		}
-	else
-		res->top--;
-	/* if res->top == 0 then clear the neg value otherwise decrease
-	 * the resp pointer */
-	if (res->top == 0)
-		res->neg = 0;
-	else
-		resp--;
-
-	for (i=0; i<loop-1; i++, wnump--, resp--)
-		{
-		BN_ULONG q,l0;
-		/* the first part of the loop uses the top two words of
-		 * snum and sdiv to calculate a BN_ULONG q such that
-		 * | wnum - sdiv * q | < sdiv */
-#if defined(BN_DIV3W) && !defined(OPENSSL_NO_ASM)
-		BN_ULONG bn_div_3_words(BN_ULONG*,BN_ULONG,BN_ULONG);
-		q=bn_div_3_words(wnump,d1,d0);
-#else
-		BN_ULONG n0,n1,rem=0;
-
-		n0=wnump[0];
-		n1=wnump[-1];
-		if (n0 == d0)
-			q=BN_MASK2;
-		else 			/* n0 < d0 */
-			{
-#ifdef BN_LLONG
-			BN_ULLONG t2;
-
-#if defined(BN_LLONG) && defined(BN_DIV2W) && !defined(bn_div_words)
-			q=(BN_ULONG)(((((BN_ULLONG)n0)<<BN_BITS2)|n1)/d0);
-#else
-			q=bn_div_words(n0,n1,d0);
-#ifdef BN_DEBUG_LEVITTE
-			fprintf(stderr,"DEBUG: bn_div_words(0x%08X,0x%08X,0x%08\
-X) -> 0x%08X\n",
-				n0, n1, d0, q);
-#endif
-#endif
-
-#ifndef REMAINDER_IS_ALREADY_CALCULATED
-			/*
-			 * rem doesn't have to be BN_ULLONG. The least we
-			 * know it's less that d0, isn't it?
-			 */
-			rem=(n1-q*d0)&BN_MASK2;
-#endif
-			t2=(BN_ULLONG)d1*q;
-
-			for (;;)
-				{
-				if (t2 <= ((((BN_ULLONG)rem)<<BN_BITS2)|wnump[-2]))
-					break;
-				q--;
-				rem += d0;
-				if (rem < d0) break; /* don't let rem overflow */
-				t2 -= d1;
-				}
-#else /* !BN_LLONG */
-			BN_ULONG t2l,t2h,ql,qh;
-
-			q=bn_div_words(n0,n1,d0);
-#ifdef BN_DEBUG_LEVITTE
-			fprintf(stderr,"DEBUG: bn_div_words(0x%08X,0x%08X,0x%08\
-X) -> 0x%08X\n",
-				n0, n1, d0, q);
-#endif
-#ifndef REMAINDER_IS_ALREADY_CALCULATED
-			rem=(n1-q*d0)&BN_MASK2;
-#endif
-
-#if defined(BN_UMULT_LOHI)
-			BN_UMULT_LOHI(t2l,t2h,d1,q);
-#elif defined(BN_UMULT_HIGH)
-			t2l = d1 * q;
-			t2h = BN_UMULT_HIGH(d1,q);
-#else
-			t2l=LBITS(d1); t2h=HBITS(d1);
-			ql =LBITS(q);  qh =HBITS(q);
-			mul64(t2l,t2h,ql,qh); /* t2=(BN_ULLONG)d1*q; */
-#endif
-
-			for (;;)
-				{
-				if ((t2h < rem) ||
-					((t2h == rem) && (t2l <= wnump[-2])))
-					break;
-				q--;
-				rem += d0;
-				if (rem < d0) break; /* don't let rem overflow */
-				if (t2l < d1) t2h--; t2l -= d1;
-				}
-#endif /* !BN_LLONG */
-			}
-#endif /* !BN_DIV3W */
-
-		l0=bn_mul_words(tmp->d,sdiv->d,div_n,q);
-		tmp->d[div_n]=l0;
-		wnum.d--;
-		/* ingore top values of the bignums just sub the two 
-		 * BN_ULONG arrays with bn_sub_words */
-		if (bn_sub_words(wnum.d, wnum.d, tmp->d, div_n+1))
-			{
-			/* Note: As we have considered only the leading
-			 * two BN_ULONGs in the calculation of q, sdiv * q
-			 * might be greater than wnum (but then (q-1) * sdiv
-			 * is less or equal than wnum)
-			 */
-			q--;
-			if (bn_add_words(wnum.d, wnum.d, sdiv->d, div_n))
-				/* we can't have an overflow here (assuming
-				 * that q != 0, but if q == 0 then tmp is
-				 * zero anyway) */
-				(*wnump)++;
-			}
-		/* store part of the result */
-		*resp = q;
-		}
-	bn_correct_top(snum);
-	if (rm != NULL)
-		{
-		/* Keep a copy of the neg flag in num because if rm==num
-		 * BN_rshift() will overwrite it.
-		 */
-		int neg = num->neg;
-		BN_rshift(rm,snum,norm_shift);
-		if (!BN_is_zero(rm))
-			rm->neg = neg;
-		bn_check_top(rm);
-		}
-	BN_CTX_end(ctx);
-	return(1);
-err:
-	bn_check_top(rm);
-	BN_CTX_end(ctx);
-	return(0);
-	}
-
-#endif
diff --git a/crypto/openssl/crypto/bn/bn_err.c b/crypto/openssl/crypto/bn/bn_err.c
deleted file mode 100644
index 24fbbb772d0f..000000000000
--- a/crypto/openssl/crypto/bn/bn_err.c
+++ /dev/null
@@ -1,148 +0,0 @@
-/* crypto/bn/bn_err.c */
-/* ====================================================================
- * Copyright (c) 1999-2005 The OpenSSL Project.  All rights reserved.
- *
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions
- * are met:
- *
- * 1. Redistributions of source code must retain the above copyright
- *    notice, this list of conditions and the following disclaimer. 
- *
- * 2. Redistributions in binary form must reproduce the above copyright
- *    notice, this list of conditions and the following disclaimer in
- *    the documentation and/or other materials provided with the
- *    distribution.
- *
- * 3. All advertising materials mentioning features or use of this
- *    software must display the following acknowledgment:
- *    "This product includes software developed by the OpenSSL Project
- *    for use in the OpenSSL Toolkit. (http://www.OpenSSL.org/)"
- *
- * 4. The names "OpenSSL Toolkit" and "OpenSSL Project" must not be used to
- *    endorse or promote products derived from this software without
- *    prior written permission. For written permission, please contact
- *    openssl-core@OpenSSL.org.
- *
- * 5. Products derived from this software may not be called "OpenSSL"
- *    nor may "OpenSSL" appear in their names without prior written
- *    permission of the OpenSSL Project.
- *
- * 6. Redistributions of any form whatsoever must retain the following
- *    acknowledgment:
- *    "This product includes software developed by the OpenSSL Project
- *    for use in the OpenSSL Toolkit (http://www.OpenSSL.org/)"
- *
- * THIS SOFTWARE IS PROVIDED BY THE OpenSSL PROJECT ``AS IS'' AND ANY
- * EXPRESSED OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
- * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR
- * PURPOSE ARE DISCLAIMED.  IN NO EVENT SHALL THE OpenSSL PROJECT OR
- * ITS CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
- * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
- * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
- * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
- * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
- * STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
- * ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED
- * OF THE POSSIBILITY OF SUCH DAMAGE.
- * ====================================================================
- *
- * This product includes cryptographic software written by Eric Young
- * (eay@cryptsoft.com).  This product includes software written by Tim
- * Hudson (tjh@cryptsoft.com).
- *
- */
-
-/* NOTE: this file was auto generated by the mkerr.pl script: any changes
- * made to it will be overwritten when the script next updates this file,
- * only reason strings will be preserved.
- */
-
-#include <stdio.h>
-#include <openssl/err.h>
-#include <openssl/bn.h>
-
-/* BEGIN ERROR CODES */
-#ifndef OPENSSL_NO_ERR
-
-#define ERR_FUNC(func) ERR_PACK(ERR_LIB_BN,func,0)
-#define ERR_REASON(reason) ERR_PACK(ERR_LIB_BN,0,reason)
-
-static ERR_STRING_DATA BN_str_functs[]=
-	{
-{ERR_FUNC(BN_F_BNRAND),	"BNRAND"},
-{ERR_FUNC(BN_F_BN_BLINDING_CONVERT_EX),	"BN_BLINDING_convert_ex"},
-{ERR_FUNC(BN_F_BN_BLINDING_CREATE_PARAM),	"BN_BLINDING_create_param"},
-{ERR_FUNC(BN_F_BN_BLINDING_INVERT_EX),	"BN_BLINDING_invert_ex"},
-{ERR_FUNC(BN_F_BN_BLINDING_NEW),	"BN_BLINDING_new"},
-{ERR_FUNC(BN_F_BN_BLINDING_UPDATE),	"BN_BLINDING_update"},
-{ERR_FUNC(BN_F_BN_BN2DEC),	"BN_bn2dec"},
-{ERR_FUNC(BN_F_BN_BN2HEX),	"BN_bn2hex"},
-{ERR_FUNC(BN_F_BN_CTX_GET),	"BN_CTX_get"},
-{ERR_FUNC(BN_F_BN_CTX_NEW),	"BN_CTX_new"},
-{ERR_FUNC(BN_F_BN_CTX_START),	"BN_CTX_start"},
-{ERR_FUNC(BN_F_BN_DIV),	"BN_div"},
-{ERR_FUNC(BN_F_BN_DIV_RECP),	"BN_div_recp"},
-{ERR_FUNC(BN_F_BN_EXP),	"BN_exp"},
-{ERR_FUNC(BN_F_BN_EXPAND2),	"bn_expand2"},
-{ERR_FUNC(BN_F_BN_EXPAND_INTERNAL),	"BN_EXPAND_INTERNAL"},
-{ERR_FUNC(BN_F_BN_GF2M_MOD),	"BN_GF2m_mod"},
-{ERR_FUNC(BN_F_BN_GF2M_MOD_EXP),	"BN_GF2m_mod_exp"},
-{ERR_FUNC(BN_F_BN_GF2M_MOD_MUL),	"BN_GF2m_mod_mul"},
-{ERR_FUNC(BN_F_BN_GF2M_MOD_SOLVE_QUAD),	"BN_GF2m_mod_solve_quad"},
-{ERR_FUNC(BN_F_BN_GF2M_MOD_SOLVE_QUAD_ARR),	"BN_GF2m_mod_solve_quad_arr"},
-{ERR_FUNC(BN_F_BN_GF2M_MOD_SQR),	"BN_GF2m_mod_sqr"},
-{ERR_FUNC(BN_F_BN_GF2M_MOD_SQRT),	"BN_GF2m_mod_sqrt"},
-{ERR_FUNC(BN_F_BN_MOD_EXP2_MONT),	"BN_mod_exp2_mont"},
-{ERR_FUNC(BN_F_BN_MOD_EXP_MONT),	"BN_mod_exp_mont"},
-{ERR_FUNC(BN_F_BN_MOD_EXP_MONT_CONSTTIME),	"BN_mod_exp_mont_consttime"},
-{ERR_FUNC(BN_F_BN_MOD_EXP_MONT_WORD),	"BN_mod_exp_mont_word"},
-{ERR_FUNC(BN_F_BN_MOD_EXP_RECP),	"BN_mod_exp_recp"},
-{ERR_FUNC(BN_F_BN_MOD_EXP_SIMPLE),	"BN_mod_exp_simple"},
-{ERR_FUNC(BN_F_BN_MOD_INVERSE),	"BN_mod_inverse"},
-{ERR_FUNC(BN_F_BN_MOD_LSHIFT_QUICK),	"BN_mod_lshift_quick"},
-{ERR_FUNC(BN_F_BN_MOD_MUL_RECIPROCAL),	"BN_mod_mul_reciprocal"},
-{ERR_FUNC(BN_F_BN_MOD_SQRT),	"BN_mod_sqrt"},
-{ERR_FUNC(BN_F_BN_MPI2BN),	"BN_mpi2bn"},
-{ERR_FUNC(BN_F_BN_NEW),	"BN_new"},
-{ERR_FUNC(BN_F_BN_RAND),	"BN_rand"},
-{ERR_FUNC(BN_F_BN_RAND_RANGE),	"BN_rand_range"},
-{ERR_FUNC(BN_F_BN_USUB),	"BN_usub"},
-{0,NULL}
-	};
-
-static ERR_STRING_DATA BN_str_reasons[]=
-	{
-{ERR_REASON(BN_R_ARG2_LT_ARG3)           ,"arg2 lt arg3"},
-{ERR_REASON(BN_R_BAD_RECIPROCAL)         ,"bad reciprocal"},
-{ERR_REASON(BN_R_BIGNUM_TOO_LONG)        ,"bignum too long"},
-{ERR_REASON(BN_R_CALLED_WITH_EVEN_MODULUS),"called with even modulus"},
-{ERR_REASON(BN_R_DIV_BY_ZERO)            ,"div by zero"},
-{ERR_REASON(BN_R_ENCODING_ERROR)         ,"encoding error"},
-{ERR_REASON(BN_R_EXPAND_ON_STATIC_BIGNUM_DATA),"expand on static bignum data"},
-{ERR_REASON(BN_R_INPUT_NOT_REDUCED)      ,"input not reduced"},
-{ERR_REASON(BN_R_INVALID_LENGTH)         ,"invalid length"},
-{ERR_REASON(BN_R_INVALID_RANGE)          ,"invalid range"},
-{ERR_REASON(BN_R_NOT_A_SQUARE)           ,"not a square"},
-{ERR_REASON(BN_R_NOT_INITIALIZED)        ,"not initialized"},
-{ERR_REASON(BN_R_NO_INVERSE)             ,"no inverse"},
-{ERR_REASON(BN_R_NO_SOLUTION)            ,"no solution"},
-{ERR_REASON(BN_R_P_IS_NOT_PRIME)         ,"p is not prime"},
-{ERR_REASON(BN_R_TOO_MANY_ITERATIONS)    ,"too many iterations"},
-{ERR_REASON(BN_R_TOO_MANY_TEMPORARY_VARIABLES),"too many temporary variables"},
-{0,NULL}
-	};
-
-#endif
-
-void ERR_load_BN_strings(void)
-	{
-#ifndef OPENSSL_NO_ERR
-
-	if (ERR_func_error_string(BN_str_functs[0].error) == NULL)
-		{
-		ERR_load_strings(0,BN_str_functs);
-		ERR_load_strings(0,BN_str_reasons);
-		}
-#endif
-	}
diff --git a/crypto/openssl/crypto/bn/bn_exp.c b/crypto/openssl/crypto/bn/bn_exp.c
deleted file mode 100644
index 8f8c69448191..000000000000
--- a/crypto/openssl/crypto/bn/bn_exp.c
+++ /dev/null
@@ -1,990 +0,0 @@
-/* crypto/bn/bn_exp.c */
-/* Copyright (C) 1995-1998 Eric Young (eay@cryptsoft.com)
- * All rights reserved.
- *
- * This package is an SSL implementation written
- * by Eric Young (eay@cryptsoft.com).
- * The implementation was written so as to conform with Netscapes SSL.
- * 
- * This library is free for commercial and non-commercial use as long as
- * the following conditions are aheared to.  The following conditions
- * apply to all code found in this distribution, be it the RC4, RSA,
- * lhash, DES, etc., code; not just the SSL code.  The SSL documentation
- * included with this distribution is covered by the same copyright terms
- * except that the holder is Tim Hudson (tjh@cryptsoft.com).
- * 
- * Copyright remains Eric Young's, and as such any Copyright notices in
- * the code are not to be removed.
- * If this package is used in a product, Eric Young should be given attribution
- * as the author of the parts of the library used.
- * This can be in the form of a textual message at program startup or
- * in documentation (online or textual) provided with the package.
- * 
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions
- * are met:
- * 1. Redistributions of source code must retain the copyright
- *    notice, this list of conditions and the following disclaimer.
- * 2. Redistributions in binary form must reproduce the above copyright
- *    notice, this list of conditions and the following disclaimer in the
- *    documentation and/or other materials provided with the distribution.
- * 3. All advertising materials mentioning features or use of this software
- *    must display the following acknowledgement:
- *    "This product includes cryptographic software written by
- *     Eric Young (eay@cryptsoft.com)"
- *    The word 'cryptographic' can be left out if the rouines from the library
- *    being used are not cryptographic related :-).
- * 4. If you include any Windows specific code (or a derivative thereof) from 
- *    the apps directory (application code) you must include an acknowledgement:
- *    "This product includes software written by Tim Hudson (tjh@cryptsoft.com)"
- * 
- * THIS SOFTWARE IS PROVIDED BY ERIC YOUNG ``AS IS'' AND
- * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
- * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
- * ARE DISCLAIMED.  IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE
- * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
- * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
- * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
- * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
- * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
- * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
- * SUCH DAMAGE.
- * 
- * The licence and distribution terms for any publically available version or
- * derivative of this code cannot be changed.  i.e. this code cannot simply be
- * copied and put under another distribution licence
- * [including the GNU Public Licence.]
- */
-/* ====================================================================
- * Copyright (c) 1998-2005 The OpenSSL Project.  All rights reserved.
- *
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions
- * are met:
- *
- * 1. Redistributions of source code must retain the above copyright
- *    notice, this list of conditions and the following disclaimer. 
- *
- * 2. Redistributions in binary form must reproduce the above copyright
- *    notice, this list of conditions and the following disclaimer in
- *    the documentation and/or other materials provided with the
- *    distribution.
- *
- * 3. All advertising materials mentioning features or use of this
- *    software must display the following acknowledgment:
- *    "This product includes software developed by the OpenSSL Project
- *    for use in the OpenSSL Toolkit. (http://www.openssl.org/)"
- *
- * 4. The names "OpenSSL Toolkit" and "OpenSSL Project" must not be used to
- *    endorse or promote products derived from this software without
- *    prior written permission. For written permission, please contact
- *    openssl-core@openssl.org.
- *
- * 5. Products derived from this software may not be called "OpenSSL"
- *    nor may "OpenSSL" appear in their names without prior written
- *    permission of the OpenSSL Project.
- *
- * 6. Redistributions of any form whatsoever must retain the following
- *    acknowledgment:
- *    "This product includes software developed by the OpenSSL Project
- *    for use in the OpenSSL Toolkit (http://www.openssl.org/)"
- *
- * THIS SOFTWARE IS PROVIDED BY THE OpenSSL PROJECT ``AS IS'' AND ANY
- * EXPRESSED OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
- * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR
- * PURPOSE ARE DISCLAIMED.  IN NO EVENT SHALL THE OpenSSL PROJECT OR
- * ITS CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
- * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
- * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
- * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
- * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
- * STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
- * ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED
- * OF THE POSSIBILITY OF SUCH DAMAGE.
- * ====================================================================
- *
- * This product includes cryptographic software written by Eric Young
- * (eay@cryptsoft.com).  This product includes software written by Tim
- * Hudson (tjh@cryptsoft.com).
- *
- */
-
-
-#include "cryptlib.h"
-#include "bn_lcl.h"
-
-/* maximum precomputation table size for *variable* sliding windows */
-#define TABLE_SIZE	32
-
-/* this one works - simple but works */
-int BN_exp(BIGNUM *r, const BIGNUM *a, const BIGNUM *p, BN_CTX *ctx)
-	{
-	int i,bits,ret=0;
-	BIGNUM *v,*rr;
-
-	if (BN_get_flags(p, BN_FLG_EXP_CONSTTIME) != 0)
-		{
-		/* BN_FLG_EXP_CONSTTIME only supported by BN_mod_exp_mont() */
-		BNerr(BN_F_BN_EXP,ERR_R_SHOULD_NOT_HAVE_BEEN_CALLED);
-		return -1;
-		}
-
-	BN_CTX_start(ctx);
-	if ((r == a) || (r == p))
-		rr = BN_CTX_get(ctx);
-	else
-		rr = r;
-	if ((v = BN_CTX_get(ctx)) == NULL) goto err;
-
-	if (BN_copy(v,a) == NULL) goto err;
-	bits=BN_num_bits(p);
-
-	if (BN_is_odd(p))
-		{ if (BN_copy(rr,a) == NULL) goto err; }
-	else	{ if (!BN_one(rr)) goto err; }
-
-	for (i=1; i<bits; i++)
-		{
-		if (!BN_sqr(v,v,ctx)) goto err;
-		if (BN_is_bit_set(p,i))
-			{
-			if (!BN_mul(rr,rr,v,ctx)) goto err;
-			}
-		}
-	ret=1;
-err:
-	if (r != rr) BN_copy(r,rr);
-	BN_CTX_end(ctx);
-	bn_check_top(r);
-	return(ret);
-	}
-
-
-int BN_mod_exp(BIGNUM *r, const BIGNUM *a, const BIGNUM *p, const BIGNUM *m,
-	       BN_CTX *ctx)
-	{
-	int ret;
-
-	bn_check_top(a);
-	bn_check_top(p);
-	bn_check_top(m);
-
-	/* For even modulus  m = 2^k*m_odd,  it might make sense to compute
-	 * a^p mod m_odd  and  a^p mod 2^k  separately (with Montgomery
-	 * exponentiation for the odd part), using appropriate exponent
-	 * reductions, and combine the results using the CRT.
-	 *
-	 * For now, we use Montgomery only if the modulus is odd; otherwise,
-	 * exponentiation using the reciprocal-based quick remaindering
-	 * algorithm is used.
-	 *
-	 * (Timing obtained with expspeed.c [computations  a^p mod m
-	 * where  a, p, m  are of the same length: 256, 512, 1024, 2048,
-	 * 4096, 8192 bits], compared to the running time of the
-	 * standard algorithm:
-	 *
-	 *   BN_mod_exp_mont   33 .. 40 %  [AMD K6-2, Linux, debug configuration]
-         *                     55 .. 77 %  [UltraSparc processor, but
-	 *                                  debug-solaris-sparcv8-gcc conf.]
-	 * 
-	 *   BN_mod_exp_recp   50 .. 70 %  [AMD K6-2, Linux, debug configuration]
-	 *                     62 .. 118 % [UltraSparc, debug-solaris-sparcv8-gcc]
-	 *
-	 * On the Sparc, BN_mod_exp_recp was faster than BN_mod_exp_mont
-	 * at 2048 and more bits, but at 512 and 1024 bits, it was
-	 * slower even than the standard algorithm!
-	 *
-	 * "Real" timings [linux-elf, solaris-sparcv9-gcc configurations]
-	 * should be obtained when the new Montgomery reduction code
-	 * has been integrated into OpenSSL.)
-	 */
-
-#define MONT_MUL_MOD
-#define MONT_EXP_WORD
-#define RECP_MUL_MOD
-
-#ifdef MONT_MUL_MOD
-	/* I have finally been able to take out this pre-condition of
-	 * the top bit being set.  It was caused by an error in BN_div
-	 * with negatives.  There was also another problem when for a^b%m
-	 * a >= m.  eay 07-May-97 */
-/*	if ((m->d[m->top-1]&BN_TBIT) && BN_is_odd(m)) */
-
-	if (BN_is_odd(m))
-		{
-#  ifdef MONT_EXP_WORD
-		if (a->top == 1 && !a->neg && (BN_get_flags(p, BN_FLG_EXP_CONSTTIME) == 0))
-			{
-			BN_ULONG A = a->d[0];
-			ret=BN_mod_exp_mont_word(r,A,p,m,ctx,NULL);
-			}
-		else
-#  endif
-			ret=BN_mod_exp_mont(r,a,p,m,ctx,NULL);
-		}
-	else
-#endif
-#ifdef RECP_MUL_MOD
-		{ ret=BN_mod_exp_recp(r,a,p,m,ctx); }
-#else
-		{ ret=BN_mod_exp_simple(r,a,p,m,ctx); }
-#endif
-
-	bn_check_top(r);
-	return(ret);
-	}
-
-
-int BN_mod_exp_recp(BIGNUM *r, const BIGNUM *a, const BIGNUM *p,
-		    const BIGNUM *m, BN_CTX *ctx)
-	{
-	int i,j,bits,ret=0,wstart,wend,window,wvalue;
-	int start=1;
-	BIGNUM *aa;
-	/* Table of variables obtained from 'ctx' */
-	BIGNUM *val[TABLE_SIZE];
-	BN_RECP_CTX recp;
-
-	if (BN_get_flags(p, BN_FLG_EXP_CONSTTIME) != 0)
-		{
-		/* BN_FLG_EXP_CONSTTIME only supported by BN_mod_exp_mont() */
-		BNerr(BN_F_BN_MOD_EXP_RECP,ERR_R_SHOULD_NOT_HAVE_BEEN_CALLED);
-		return -1;
-		}
-
-	bits=BN_num_bits(p);
-
-	if (bits == 0)
-		{
-		ret = BN_one(r);
-		return ret;
-		}
-
-	BN_CTX_start(ctx);
-	aa = BN_CTX_get(ctx);
-	val[0] = BN_CTX_get(ctx);
-	if(!aa || !val[0]) goto err;
-
-	BN_RECP_CTX_init(&recp);
-	if (m->neg)
-		{
-		/* ignore sign of 'm' */
-		if (!BN_copy(aa, m)) goto err;
-		aa->neg = 0;
-		if (BN_RECP_CTX_set(&recp,aa,ctx) <= 0) goto err;
-		}
-	else
-		{
-		if (BN_RECP_CTX_set(&recp,m,ctx) <= 0) goto err;
-		}
-
-	if (!BN_nnmod(val[0],a,m,ctx)) goto err;		/* 1 */
-	if (BN_is_zero(val[0]))
-		{
-		BN_zero(r);
-		ret = 1;
-		goto err;
-		}
-
-	window = BN_window_bits_for_exponent_size(bits);
-	if (window > 1)
-		{
-		if (!BN_mod_mul_reciprocal(aa,val[0],val[0],&recp,ctx))
-			goto err;				/* 2 */
-		j=1<<(window-1);
-		for (i=1; i<j; i++)
-			{
-			if(((val[i] = BN_CTX_get(ctx)) == NULL) ||
-					!BN_mod_mul_reciprocal(val[i],val[i-1],
-						aa,&recp,ctx))
-				goto err;
-			}
-		}
-		
-	start=1;	/* This is used to avoid multiplication etc
-			 * when there is only the value '1' in the
-			 * buffer. */
-	wvalue=0;	/* The 'value' of the window */
-	wstart=bits-1;	/* The top bit of the window */
-	wend=0;		/* The bottom bit of the window */
-
-	if (!BN_one(r)) goto err;
-
-	for (;;)
-		{
-		if (BN_is_bit_set(p,wstart) == 0)
-			{
-			if (!start)
-				if (!BN_mod_mul_reciprocal(r,r,r,&recp,ctx))
-				goto err;
-			if (wstart == 0) break;
-			wstart--;
-			continue;
-			}
-		/* We now have wstart on a 'set' bit, we now need to work out
-		 * how bit a window to do.  To do this we need to scan
-		 * forward until the last set bit before the end of the
-		 * window */
-		j=wstart;
-		wvalue=1;
-		wend=0;
-		for (i=1; i<window; i++)
-			{
-			if (wstart-i < 0) break;
-			if (BN_is_bit_set(p,wstart-i))
-				{
-				wvalue<<=(i-wend);
-				wvalue|=1;
-				wend=i;
-				}
-			}
-
-		/* wend is the size of the current window */
-		j=wend+1;
-		/* add the 'bytes above' */
-		if (!start)
-			for (i=0; i<j; i++)
-				{
-				if (!BN_mod_mul_reciprocal(r,r,r,&recp,ctx))
-					goto err;
-				}
-		
-		/* wvalue will be an odd number < 2^window */
-		if (!BN_mod_mul_reciprocal(r,r,val[wvalue>>1],&recp,ctx))
-			goto err;
-
-		/* move the 'window' down further */
-		wstart-=wend+1;
-		wvalue=0;
-		start=0;
-		if (wstart < 0) break;
-		}
-	ret=1;
-err:
-	BN_CTX_end(ctx);
-	BN_RECP_CTX_free(&recp);
-	bn_check_top(r);
-	return(ret);
-	}
-
-
-int BN_mod_exp_mont(BIGNUM *rr, const BIGNUM *a, const BIGNUM *p,
-		    const BIGNUM *m, BN_CTX *ctx, BN_MONT_CTX *in_mont)
-	{
-	int i,j,bits,ret=0,wstart,wend,window,wvalue;
-	int start=1;
-	BIGNUM *d,*r;
-	const BIGNUM *aa;
-	/* Table of variables obtained from 'ctx' */
-	BIGNUM *val[TABLE_SIZE];
-	BN_MONT_CTX *mont=NULL;
-
-	if (BN_get_flags(p, BN_FLG_EXP_CONSTTIME) != 0)
-		{
-		return BN_mod_exp_mont_consttime(rr, a, p, m, ctx, in_mont);
-		}
-
-	bn_check_top(a);
-	bn_check_top(p);
-	bn_check_top(m);
-
-	if (!BN_is_odd(m))
-		{
-		BNerr(BN_F_BN_MOD_EXP_MONT,BN_R_CALLED_WITH_EVEN_MODULUS);
-		return(0);
-		}
-	bits=BN_num_bits(p);
-	if (bits == 0)
-		{
-		ret = BN_one(rr);
-		return ret;
-		}
-
-	BN_CTX_start(ctx);
-	d = BN_CTX_get(ctx);
-	r = BN_CTX_get(ctx);
-	val[0] = BN_CTX_get(ctx);
-	if (!d || !r || !val[0]) goto err;
-
-	/* If this is not done, things will break in the montgomery
-	 * part */
-
-	if (in_mont != NULL)
-		mont=in_mont;
-	else
-		{
-		if ((mont=BN_MONT_CTX_new()) == NULL) goto err;
-		if (!BN_MONT_CTX_set(mont,m,ctx)) goto err;
-		}
-
-	if (a->neg || BN_ucmp(a,m) >= 0)
-		{
-		if (!BN_nnmod(val[0],a,m,ctx))
-			goto err;
-		aa= val[0];
-		}
-	else
-		aa=a;
-	if (BN_is_zero(aa))
-		{
-		BN_zero(rr);
-		ret = 1;
-		goto err;
-		}
-	if (!BN_to_montgomery(val[0],aa,mont,ctx)) goto err; /* 1 */
-
-	window = BN_window_bits_for_exponent_size(bits);
-	if (window > 1)
-		{
-		if (!BN_mod_mul_montgomery(d,val[0],val[0],mont,ctx)) goto err; /* 2 */
-		j=1<<(window-1);
-		for (i=1; i<j; i++)
-			{
-			if(((val[i] = BN_CTX_get(ctx)) == NULL) ||
-					!BN_mod_mul_montgomery(val[i],val[i-1],
-						d,mont,ctx))
-				goto err;
-			}
-		}
-
-	start=1;	/* This is used to avoid multiplication etc
-			 * when there is only the value '1' in the
-			 * buffer. */
-	wvalue=0;	/* The 'value' of the window */
-	wstart=bits-1;	/* The top bit of the window */
-	wend=0;		/* The bottom bit of the window */
-
-	if (!BN_to_montgomery(r,BN_value_one(),mont,ctx)) goto err;
-	for (;;)
-		{
-		if (BN_is_bit_set(p,wstart) == 0)
-			{
-			if (!start)
-				{
-				if (!BN_mod_mul_montgomery(r,r,r,mont,ctx))
-				goto err;
-				}
-			if (wstart == 0) break;
-			wstart--;
-			continue;
-			}
-		/* We now have wstart on a 'set' bit, we now need to work out
-		 * how bit a window to do.  To do this we need to scan
-		 * forward until the last set bit before the end of the
-		 * window */
-		j=wstart;
-		wvalue=1;
-		wend=0;
-		for (i=1; i<window; i++)
-			{
-			if (wstart-i < 0) break;
-			if (BN_is_bit_set(p,wstart-i))
-				{
-				wvalue<<=(i-wend);
-				wvalue|=1;
-				wend=i;
-				}
-			}
-
-		/* wend is the size of the current window */
-		j=wend+1;
-		/* add the 'bytes above' */
-		if (!start)
-			for (i=0; i<j; i++)
-				{
-				if (!BN_mod_mul_montgomery(r,r,r,mont,ctx))
-					goto err;
-				}
-		
-		/* wvalue will be an odd number < 2^window */
-		if (!BN_mod_mul_montgomery(r,r,val[wvalue>>1],mont,ctx))
-			goto err;
-
-		/* move the 'window' down further */
-		wstart-=wend+1;
-		wvalue=0;
-		start=0;
-		if (wstart < 0) break;
-		}
-	if (!BN_from_montgomery(rr,r,mont,ctx)) goto err;
-	ret=1;
-err:
-	if ((in_mont == NULL) && (mont != NULL)) BN_MONT_CTX_free(mont);
-	BN_CTX_end(ctx);
-	bn_check_top(rr);
-	return(ret);
-	}
-
-
-/* BN_mod_exp_mont_consttime() stores the precomputed powers in a specific layout
- * so that accessing any of these table values shows the same access pattern as far
- * as cache lines are concerned.  The following functions are used to transfer a BIGNUM
- * from/to that table. */
-
-static int MOD_EXP_CTIME_COPY_TO_PREBUF(BIGNUM *b, int top, unsigned char *buf, int idx, int width)
-	{
-	size_t i, j;
-
-	if (bn_wexpand(b, top) == NULL)
-		return 0;
-	while (b->top < top)
-		{
-		b->d[b->top++] = 0;
-		}
-	
-	for (i = 0, j=idx; i < top * sizeof b->d[0]; i++, j+=width)
-		{
-		buf[j] = ((unsigned char*)b->d)[i];
-		}
-
-	bn_correct_top(b);
-	return 1;
-	}
-
-static int MOD_EXP_CTIME_COPY_FROM_PREBUF(BIGNUM *b, int top, unsigned char *buf, int idx, int width)
-	{
-	size_t i, j;
-
-	if (bn_wexpand(b, top) == NULL)
-		return 0;
-
-	for (i=0, j=idx; i < top * sizeof b->d[0]; i++, j+=width)
-		{
-		((unsigned char*)b->d)[i] = buf[j];
-		}
-
-	b->top = top;
-	bn_correct_top(b);
-	return 1;
-	}	
-
-/* Given a pointer value, compute the next address that is a cache line multiple. */
-#define MOD_EXP_CTIME_ALIGN(x_) \
-	((unsigned char*)(x_) + (MOD_EXP_CTIME_MIN_CACHE_LINE_WIDTH - (((BN_ULONG)(x_)) & (MOD_EXP_CTIME_MIN_CACHE_LINE_MASK))))
-
-/* This variant of BN_mod_exp_mont() uses fixed windows and the special
- * precomputation memory layout to limit data-dependency to a minimum
- * to protect secret exponents (cf. the hyper-threading timing attacks
- * pointed out by Colin Percival,
- * http://www.daemonology.net/hyperthreading-considered-harmful/)
- */
-int BN_mod_exp_mont_consttime(BIGNUM *rr, const BIGNUM *a, const BIGNUM *p,
-		    const BIGNUM *m, BN_CTX *ctx, BN_MONT_CTX *in_mont)
-	{
-	int i,bits,ret=0,idx,window,wvalue;
-	int top;
- 	BIGNUM *r;
-	const BIGNUM *aa;
-	BN_MONT_CTX *mont=NULL;
-
-	int numPowers;
-	unsigned char *powerbufFree=NULL;
-	int powerbufLen = 0;
-	unsigned char *powerbuf=NULL;
-	BIGNUM *computeTemp=NULL, *am=NULL;
-
-	bn_check_top(a);
-	bn_check_top(p);
-	bn_check_top(m);
-
-	top = m->top;
-
-	if (!(m->d[0] & 1))
-		{
-		BNerr(BN_F_BN_MOD_EXP_MONT_CONSTTIME,BN_R_CALLED_WITH_EVEN_MODULUS);
-		return(0);
-		}
-	bits=BN_num_bits(p);
-	if (bits == 0)
-		{
-		ret = BN_one(rr);
-		return ret;
-		}
-
- 	/* Initialize BIGNUM context and allocate intermediate result */
-	BN_CTX_start(ctx);
-	r = BN_CTX_get(ctx);
-	if (r == NULL) goto err;
-
-	/* Allocate a montgomery context if it was not supplied by the caller.
-	 * If this is not done, things will break in the montgomery part.
- 	 */
-	if (in_mont != NULL)
-		mont=in_mont;
-	else
-		{
-		if ((mont=BN_MONT_CTX_new()) == NULL) goto err;
-		if (!BN_MONT_CTX_set(mont,m,ctx)) goto err;
-		}
-
-	/* Get the window size to use with size of p. */
-	window = BN_window_bits_for_ctime_exponent_size(bits);
-
-	/* Allocate a buffer large enough to hold all of the pre-computed
-	 * powers of a.
-	 */
-	numPowers = 1 << window;
-	powerbufLen = sizeof(m->d[0])*top*numPowers;
-	if ((powerbufFree=(unsigned char*)OPENSSL_malloc(powerbufLen+MOD_EXP_CTIME_MIN_CACHE_LINE_WIDTH)) == NULL)
-		goto err;
-		
-	powerbuf = MOD_EXP_CTIME_ALIGN(powerbufFree);
-	memset(powerbuf, 0, powerbufLen);
-
- 	/* Initialize the intermediate result. Do this early to save double conversion,
-	 * once each for a^0 and intermediate result.
-	 */
- 	if (!BN_to_montgomery(r,BN_value_one(),mont,ctx)) goto err;
-	if (!MOD_EXP_CTIME_COPY_TO_PREBUF(r, top, powerbuf, 0, numPowers)) goto err;
-
-	/* Initialize computeTemp as a^1 with montgomery precalcs */
-	computeTemp = BN_CTX_get(ctx);
-	am = BN_CTX_get(ctx);
-	if (computeTemp==NULL || am==NULL) goto err;
-
-	if (a->neg || BN_ucmp(a,m) >= 0)
-		{
-		if (!BN_mod(am,a,m,ctx))
-			goto err;
-		aa= am;
-		}
-	else
-		aa=a;
-	if (!BN_to_montgomery(am,aa,mont,ctx)) goto err;
-	if (!BN_copy(computeTemp, am)) goto err;
-	if (!MOD_EXP_CTIME_COPY_TO_PREBUF(am, top, powerbuf, 1, numPowers)) goto err;
-
-	/* If the window size is greater than 1, then calculate
-	 * val[i=2..2^winsize-1]. Powers are computed as a*a^(i-1)
-	 * (even powers could instead be computed as (a^(i/2))^2
-	 * to use the slight performance advantage of sqr over mul).
-	 */
-	if (window > 1)
-		{
-		for (i=2; i<numPowers; i++)
-			{
-			/* Calculate a^i = a^(i-1) * a */
-			if (!BN_mod_mul_montgomery(computeTemp,am,computeTemp,mont,ctx))
-				goto err;
-			if (!MOD_EXP_CTIME_COPY_TO_PREBUF(computeTemp, top, powerbuf, i, numPowers)) goto err;
-			}
-		}
-
- 	/* Adjust the number of bits up to a multiple of the window size.
- 	 * If the exponent length is not a multiple of the window size, then
- 	 * this pads the most significant bits with zeros to normalize the
- 	 * scanning loop to there's no special cases.
- 	 *
- 	 * * NOTE: Making the window size a power of two less than the native
-	 * * word size ensures that the padded bits won't go past the last
- 	 * * word in the internal BIGNUM structure. Going past the end will
- 	 * * still produce the correct result, but causes a different branch
- 	 * * to be taken in the BN_is_bit_set function.
- 	 */
- 	bits = ((bits+window-1)/window)*window;
- 	idx=bits-1;	/* The top bit of the window */
-
- 	/* Scan the exponent one window at a time starting from the most
- 	 * significant bits.
- 	 */
- 	while (idx >= 0)
-  		{
- 		wvalue=0; /* The 'value' of the window */
- 		
- 		/* Scan the window, squaring the result as we go */
- 		for (i=0; i<window; i++,idx--)
- 			{
-			if (!BN_mod_mul_montgomery(r,r,r,mont,ctx))	goto err;
-			wvalue = (wvalue<<1)+BN_is_bit_set(p,idx);
-  			}
- 		
-		/* Fetch the appropriate pre-computed value from the pre-buf */
-		if (!MOD_EXP_CTIME_COPY_FROM_PREBUF(computeTemp, top, powerbuf, wvalue, numPowers)) goto err;
-
- 		/* Multiply the result into the intermediate result */
- 		if (!BN_mod_mul_montgomery(r,r,computeTemp,mont,ctx)) goto err;
-  		}
-
- 	/* Convert the final result from montgomery to standard format */
-	if (!BN_from_montgomery(rr,r,mont,ctx)) goto err;
-	ret=1;
-err:
-	if ((in_mont == NULL) && (mont != NULL)) BN_MONT_CTX_free(mont);
-	if (powerbuf!=NULL)
-		{
-		OPENSSL_cleanse(powerbuf,powerbufLen);
-		OPENSSL_free(powerbufFree);
-		}
- 	if (am!=NULL) BN_clear(am);
- 	if (computeTemp!=NULL) BN_clear(computeTemp);
-	BN_CTX_end(ctx);
-	return(ret);
-	}
-
-int BN_mod_exp_mont_word(BIGNUM *rr, BN_ULONG a, const BIGNUM *p,
-                         const BIGNUM *m, BN_CTX *ctx, BN_MONT_CTX *in_mont)
-	{
-	BN_MONT_CTX *mont = NULL;
-	int b, bits, ret=0;
-	int r_is_one;
-	BN_ULONG w, next_w;
-	BIGNUM *d, *r, *t;
-	BIGNUM *swap_tmp;
-#define BN_MOD_MUL_WORD(r, w, m) \
-		(BN_mul_word(r, (w)) && \
-		(/* BN_ucmp(r, (m)) < 0 ? 1 :*/  \
-			(BN_mod(t, r, m, ctx) && (swap_tmp = r, r = t, t = swap_tmp, 1))))
-		/* BN_MOD_MUL_WORD is only used with 'w' large,
-		 * so the BN_ucmp test is probably more overhead
-		 * than always using BN_mod (which uses BN_copy if
-		 * a similar test returns true). */
-		/* We can use BN_mod and do not need BN_nnmod because our
-		 * accumulator is never negative (the result of BN_mod does
-		 * not depend on the sign of the modulus).
-		 */
-#define BN_TO_MONTGOMERY_WORD(r, w, mont) \
-		(BN_set_word(r, (w)) && BN_to_montgomery(r, r, (mont), ctx))
-
-	if (BN_get_flags(p, BN_FLG_EXP_CONSTTIME) != 0)
-		{
-		/* BN_FLG_EXP_CONSTTIME only supported by BN_mod_exp_mont() */
-		BNerr(BN_F_BN_MOD_EXP_MONT_WORD,ERR_R_SHOULD_NOT_HAVE_BEEN_CALLED);
-		return -1;
-		}
-
-	bn_check_top(p);
-	bn_check_top(m);
-
-	if (!BN_is_odd(m))
-		{
-		BNerr(BN_F_BN_MOD_EXP_MONT_WORD,BN_R_CALLED_WITH_EVEN_MODULUS);
-		return(0);
-		}
-	if (m->top == 1)
-		a %= m->d[0]; /* make sure that 'a' is reduced */
-
-	bits = BN_num_bits(p);
-	if (bits == 0)
-		{
-		ret = BN_one(rr);
-		return ret;
-		}
-	if (a == 0)
-		{
-		BN_zero(rr);
-		ret = 1;
-		return ret;
-		}
-
-	BN_CTX_start(ctx);
-	d = BN_CTX_get(ctx);
-	r = BN_CTX_get(ctx);
-	t = BN_CTX_get(ctx);
-	if (d == NULL || r == NULL || t == NULL) goto err;
-
-	if (in_mont != NULL)
-		mont=in_mont;
-	else
-		{
-		if ((mont = BN_MONT_CTX_new()) == NULL) goto err;
-		if (!BN_MONT_CTX_set(mont, m, ctx)) goto err;
-		}
-
-	r_is_one = 1; /* except for Montgomery factor */
-
-	/* bits-1 >= 0 */
-
-	/* The result is accumulated in the product r*w. */
-	w = a; /* bit 'bits-1' of 'p' is always set */
-	for (b = bits-2; b >= 0; b--)
-		{
-		/* First, square r*w. */
-		next_w = w*w;
-		if ((next_w/w) != w) /* overflow */
-			{
-			if (r_is_one)
-				{
-				if (!BN_TO_MONTGOMERY_WORD(r, w, mont)) goto err;
-				r_is_one = 0;
-				}
-			else
-				{
-				if (!BN_MOD_MUL_WORD(r, w, m)) goto err;
-				}
-			next_w = 1;
-			}
-		w = next_w;
-		if (!r_is_one)
-			{
-			if (!BN_mod_mul_montgomery(r, r, r, mont, ctx)) goto err;
-			}
-
-		/* Second, multiply r*w by 'a' if exponent bit is set. */
-		if (BN_is_bit_set(p, b))
-			{
-			next_w = w*a;
-			if ((next_w/a) != w) /* overflow */
-				{
-				if (r_is_one)
-					{
-					if (!BN_TO_MONTGOMERY_WORD(r, w, mont)) goto err;
-					r_is_one = 0;
-					}
-				else
-					{
-					if (!BN_MOD_MUL_WORD(r, w, m)) goto err;
-					}
-				next_w = a;
-				}
-			w = next_w;
-			}
-		}
-
-	/* Finally, set r:=r*w. */
-	if (w != 1)
-		{
-		if (r_is_one)
-			{
-			if (!BN_TO_MONTGOMERY_WORD(r, w, mont)) goto err;
-			r_is_one = 0;
-			}
-		else
-			{
-			if (!BN_MOD_MUL_WORD(r, w, m)) goto err;
-			}
-		}
-
-	if (r_is_one) /* can happen only if a == 1*/
-		{
-		if (!BN_one(rr)) goto err;
-		}
-	else
-		{
-		if (!BN_from_montgomery(rr, r, mont, ctx)) goto err;
-		}
-	ret = 1;
-err:
-	if ((in_mont == NULL) && (mont != NULL)) BN_MONT_CTX_free(mont);
-	BN_CTX_end(ctx);
-	bn_check_top(rr);
-	return(ret);
-	}
-
-
-/* The old fallback, simple version :-) */
-int BN_mod_exp_simple(BIGNUM *r, const BIGNUM *a, const BIGNUM *p,
-		const BIGNUM *m, BN_CTX *ctx)
-	{
-	int i,j,bits,ret=0,wstart,wend,window,wvalue;
-	int start=1;
-	BIGNUM *d;
-	/* Table of variables obtained from 'ctx' */
-	BIGNUM *val[TABLE_SIZE];
-
-	if (BN_get_flags(p, BN_FLG_EXP_CONSTTIME) != 0)
-		{
-		/* BN_FLG_EXP_CONSTTIME only supported by BN_mod_exp_mont() */
-		BNerr(BN_F_BN_MOD_EXP_SIMPLE,ERR_R_SHOULD_NOT_HAVE_BEEN_CALLED);
-		return -1;
-		}
-
-	bits=BN_num_bits(p);
-
-	if (bits == 0)
-		{
-		ret = BN_one(r);
-		return ret;
-		}
-
-	BN_CTX_start(ctx);
-	d = BN_CTX_get(ctx);
-	val[0] = BN_CTX_get(ctx);
-	if(!d || !val[0]) goto err;
-
-	if (!BN_nnmod(val[0],a,m,ctx)) goto err;		/* 1 */
-	if (BN_is_zero(val[0]))
-		{
-		BN_zero(r);
-		ret = 1;
-		goto err;
-		}
-
-	window = BN_window_bits_for_exponent_size(bits);
-	if (window > 1)
-		{
-		if (!BN_mod_mul(d,val[0],val[0],m,ctx))
-			goto err;				/* 2 */
-		j=1<<(window-1);
-		for (i=1; i<j; i++)
-			{
-			if(((val[i] = BN_CTX_get(ctx)) == NULL) ||
-					!BN_mod_mul(val[i],val[i-1],d,m,ctx))
-				goto err;
-			}
-		}
-
-	start=1;	/* This is used to avoid multiplication etc
-			 * when there is only the value '1' in the
-			 * buffer. */
-	wvalue=0;	/* The 'value' of the window */
-	wstart=bits-1;	/* The top bit of the window */
-	wend=0;		/* The bottom bit of the window */
-
-	if (!BN_one(r)) goto err;
-
-	for (;;)
-		{
-		if (BN_is_bit_set(p,wstart) == 0)
-			{
-			if (!start)
-				if (!BN_mod_mul(r,r,r,m,ctx))
-				goto err;
-			if (wstart == 0) break;
-			wstart--;
-			continue;
-			}
-		/* We now have wstart on a 'set' bit, we now need to work out
-		 * how bit a window to do.  To do this we need to scan
-		 * forward until the last set bit before the end of the
-		 * window */
-		j=wstart;
-		wvalue=1;
-		wend=0;
-		for (i=1; i<window; i++)
-			{
-			if (wstart-i < 0) break;
-			if (BN_is_bit_set(p,wstart-i))
-				{
-				wvalue<<=(i-wend);
-				wvalue|=1;
-				wend=i;
-				}
-			}
-
-		/* wend is the size of the current window */
-		j=wend+1;
-		/* add the 'bytes above' */
-		if (!start)
-			for (i=0; i<j; i++)
-				{
-				if (!BN_mod_mul(r,r,r,m,ctx))
-					goto err;
-				}
-		
-		/* wvalue will be an odd number < 2^window */
-		if (!BN_mod_mul(r,r,val[wvalue>>1],m,ctx))
-			goto err;
-
-		/* move the 'window' down further */
-		wstart-=wend+1;
-		wvalue=0;
-		start=0;
-		if (wstart < 0) break;
-		}
-	ret=1;
-err:
-	BN_CTX_end(ctx);
-	bn_check_top(r);
-	return(ret);
-	}
-
diff --git a/crypto/openssl/crypto/bn/bn_exp2.c b/crypto/openssl/crypto/bn/bn_exp2.c
deleted file mode 100644
index b3f43cec8c1c..000000000000
--- a/crypto/openssl/crypto/bn/bn_exp2.c
+++ /dev/null
@@ -1,311 +0,0 @@
-/* crypto/bn/bn_exp2.c */
-/* Copyright (C) 1995-1998 Eric Young (eay@cryptsoft.com)
- * All rights reserved.
- *
- * This package is an SSL implementation written
- * by Eric Young (eay@cryptsoft.com).
- * The implementation was written so as to conform with Netscapes SSL.
- * 
- * This library is free for commercial and non-commercial use as long as
- * the following conditions are aheared to.  The following conditions
- * apply to all code found in this distribution, be it the RC4, RSA,
- * lhash, DES, etc., code; not just the SSL code.  The SSL documentation
- * included with this distribution is covered by the same copyright terms
- * except that the holder is Tim Hudson (tjh@cryptsoft.com).
- * 
- * Copyright remains Eric Young's, and as such any Copyright notices in
- * the code are not to be removed.
- * If this package is used in a product, Eric Young should be given attribution
- * as the author of the parts of the library used.
- * This can be in the form of a textual message at program startup or
- * in documentation (online or textual) provided with the package.
- * 
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions
- * are met:
- * 1. Redistributions of source code must retain the copyright
- *    notice, this list of conditions and the following disclaimer.
- * 2. Redistributions in binary form must reproduce the above copyright
- *    notice, this list of conditions and the following disclaimer in the
- *    documentation and/or other materials provided with the distribution.
- * 3. All advertising materials mentioning features or use of this software
- *    must display the following acknowledgement:
- *    "This product includes cryptographic software written by
- *     Eric Young (eay@cryptsoft.com)"
- *    The word 'cryptographic' can be left out if the rouines from the library
- *    being used are not cryptographic related :-).
- * 4. If you include any Windows specific code (or a derivative thereof) from 
- *    the apps directory (application code) you must include an acknowledgement:
- *    "This product includes software written by Tim Hudson (tjh@cryptsoft.com)"
- * 
- * THIS SOFTWARE IS PROVIDED BY ERIC YOUNG ``AS IS'' AND
- * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
- * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
- * ARE DISCLAIMED.  IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE
- * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
- * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
- * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
- * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
- * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
- * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
- * SUCH DAMAGE.
- * 
- * The licence and distribution terms for any publically available version or
- * derivative of this code cannot be changed.  i.e. this code cannot simply be
- * copied and put under another distribution licence
- * [including the GNU Public Licence.]
- */
-/* ====================================================================
- * Copyright (c) 1998-2000 The OpenSSL Project.  All rights reserved.
- *
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions
- * are met:
- *
- * 1. Redistributions of source code must retain the above copyright
- *    notice, this list of conditions and the following disclaimer. 
- *
- * 2. Redistributions in binary form must reproduce the above copyright
- *    notice, this list of conditions and the following disclaimer in
- *    the documentation and/or other materials provided with the
- *    distribution.
- *
- * 3. All advertising materials mentioning features or use of this
- *    software must display the following acknowledgment:
- *    "This product includes software developed by the OpenSSL Project
- *    for use in the OpenSSL Toolkit. (http://www.openssl.org/)"
- *
- * 4. The names "OpenSSL Toolkit" and "OpenSSL Project" must not be used to
- *    endorse or promote products derived from this software without
- *    prior written permission. For written permission, please contact
- *    openssl-core@openssl.org.
- *
- * 5. Products derived from this software may not be called "OpenSSL"
- *    nor may "OpenSSL" appear in their names without prior written
- *    permission of the OpenSSL Project.
- *
- * 6. Redistributions of any form whatsoever must retain the following
- *    acknowledgment:
- *    "This product includes software developed by the OpenSSL Project
- *    for use in the OpenSSL Toolkit (http://www.openssl.org/)"
- *
- * THIS SOFTWARE IS PROVIDED BY THE OpenSSL PROJECT ``AS IS'' AND ANY
- * EXPRESSED OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
- * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR
- * PURPOSE ARE DISCLAIMED.  IN NO EVENT SHALL THE OpenSSL PROJECT OR
- * ITS CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
- * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
- * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
- * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
- * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
- * STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
- * ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED
- * OF THE POSSIBILITY OF SUCH DAMAGE.
- * ====================================================================
- *
- * This product includes cryptographic software written by Eric Young
- * (eay@cryptsoft.com).  This product includes software written by Tim
- * Hudson (tjh@cryptsoft.com).
- *
- */
-
-#include <stdio.h>
-#include "cryptlib.h"
-#include "bn_lcl.h"
-
-#define TABLE_SIZE	32
-
-int BN_mod_exp2_mont(BIGNUM *rr, const BIGNUM *a1, const BIGNUM *p1,
-	const BIGNUM *a2, const BIGNUM *p2, const BIGNUM *m,
-	BN_CTX *ctx, BN_MONT_CTX *in_mont)
-	{
-	int i,j,bits,b,bits1,bits2,ret=0,wpos1,wpos2,window1,window2,wvalue1,wvalue2;
-	int r_is_one=1;
-	BIGNUM *d,*r;
-	const BIGNUM *a_mod_m;
-	/* Tables of variables obtained from 'ctx' */
-	BIGNUM *val1[TABLE_SIZE], *val2[TABLE_SIZE];
-	BN_MONT_CTX *mont=NULL;
-
-	bn_check_top(a1);
-	bn_check_top(p1);
-	bn_check_top(a2);
-	bn_check_top(p2);
-	bn_check_top(m);
-
-	if (!(m->d[0] & 1))
-		{
-		BNerr(BN_F_BN_MOD_EXP2_MONT,BN_R_CALLED_WITH_EVEN_MODULUS);
-		return(0);
-		}
-	bits1=BN_num_bits(p1);
-	bits2=BN_num_bits(p2);
-	if ((bits1 == 0) && (bits2 == 0))
-		{
-		ret = BN_one(rr);
-		return ret;
-		}
-	
-	bits=(bits1 > bits2)?bits1:bits2;
-
-	BN_CTX_start(ctx);
-	d = BN_CTX_get(ctx);
-	r = BN_CTX_get(ctx);
-	val1[0] = BN_CTX_get(ctx);
-	val2[0] = BN_CTX_get(ctx);
-	if(!d || !r || !val1[0] || !val2[0]) goto err;
-
-	if (in_mont != NULL)
-		mont=in_mont;
-	else
-		{
-		if ((mont=BN_MONT_CTX_new()) == NULL) goto err;
-		if (!BN_MONT_CTX_set(mont,m,ctx)) goto err;
-		}
-
-	window1 = BN_window_bits_for_exponent_size(bits1);
-	window2 = BN_window_bits_for_exponent_size(bits2);
-
-	/*
-	 * Build table for a1:   val1[i] := a1^(2*i + 1) mod m  for i = 0 .. 2^(window1-1)
-	 */
-	if (a1->neg || BN_ucmp(a1,m) >= 0)
-		{
-		if (!BN_mod(val1[0],a1,m,ctx))
-			goto err;
-		a_mod_m = val1[0];
-		}
-	else
-		a_mod_m = a1;
-	if (BN_is_zero(a_mod_m))
-		{
-		BN_zero(rr);
-		ret = 1;
-		goto err;
-		}
-
-	if (!BN_to_montgomery(val1[0],a_mod_m,mont,ctx)) goto err;
-	if (window1 > 1)
-		{
-		if (!BN_mod_mul_montgomery(d,val1[0],val1[0],mont,ctx)) goto err;
-
-		j=1<<(window1-1);
-		for (i=1; i<j; i++)
-			{
-			if(((val1[i] = BN_CTX_get(ctx)) == NULL) ||
-					!BN_mod_mul_montgomery(val1[i],val1[i-1],
-						d,mont,ctx))
-				goto err;
-			}
-		}
-
-
-	/*
-	 * Build table for a2:   val2[i] := a2^(2*i + 1) mod m  for i = 0 .. 2^(window2-1)
-	 */
-	if (a2->neg || BN_ucmp(a2,m) >= 0)
-		{
-		if (!BN_mod(val2[0],a2,m,ctx))
-			goto err;
-		a_mod_m = val2[0];
-		}
-	else
-		a_mod_m = a2;
-	if (BN_is_zero(a_mod_m))
-		{
-		BN_zero(rr);
-		ret = 1;
-		goto err;
-		}
-	if (!BN_to_montgomery(val2[0],a_mod_m,mont,ctx)) goto err;
-	if (window2 > 1)
-		{
-		if (!BN_mod_mul_montgomery(d,val2[0],val2[0],mont,ctx)) goto err;
-
-		j=1<<(window2-1);
-		for (i=1; i<j; i++)
-			{
-			if(((val2[i] = BN_CTX_get(ctx)) == NULL) ||
-					!BN_mod_mul_montgomery(val2[i],val2[i-1],
-						d,mont,ctx))
-				goto err;
-			}
-		}
-
-
-	/* Now compute the power product, using independent windows. */
-	r_is_one=1;
-	wvalue1=0;  /* The 'value' of the first window */
-	wvalue2=0;  /* The 'value' of the second window */
-	wpos1=0;    /* If wvalue1 > 0, the bottom bit of the first window */
-	wpos2=0;    /* If wvalue2 > 0, the bottom bit of the second window */
-
-	if (!BN_to_montgomery(r,BN_value_one(),mont,ctx)) goto err;
-	for (b=bits-1; b>=0; b--)
-		{
-		if (!r_is_one)
-			{
-			if (!BN_mod_mul_montgomery(r,r,r,mont,ctx))
-				goto err;
-			}
-		
-		if (!wvalue1)
-			if (BN_is_bit_set(p1, b))
-				{
-				/* consider bits b-window1+1 .. b for this window */
-				i = b-window1+1;
-				while (!BN_is_bit_set(p1, i)) /* works for i<0 */
-					i++;
-				wpos1 = i;
-				wvalue1 = 1;
-				for (i = b-1; i >= wpos1; i--)
-					{
-					wvalue1 <<= 1;
-					if (BN_is_bit_set(p1, i))
-						wvalue1++;
-					}
-				}
-		
-		if (!wvalue2)
-			if (BN_is_bit_set(p2, b))
-				{
-				/* consider bits b-window2+1 .. b for this window */
-				i = b-window2+1;
-				while (!BN_is_bit_set(p2, i))
-					i++;
-				wpos2 = i;
-				wvalue2 = 1;
-				for (i = b-1; i >= wpos2; i--)
-					{
-					wvalue2 <<= 1;
-					if (BN_is_bit_set(p2, i))
-						wvalue2++;
-					}
-				}
-
-		if (wvalue1 && b == wpos1)
-			{
-			/* wvalue1 is odd and < 2^window1 */
-			if (!BN_mod_mul_montgomery(r,r,val1[wvalue1>>1],mont,ctx))
-				goto err;
-			wvalue1 = 0;
-			r_is_one = 0;
-			}
-		
-		if (wvalue2 && b == wpos2)
-			{
-			/* wvalue2 is odd and < 2^window2 */
-			if (!BN_mod_mul_montgomery(r,r,val2[wvalue2>>1],mont,ctx))
-				goto err;
-			wvalue2 = 0;
-			r_is_one = 0;
-			}
-		}
-	BN_from_montgomery(rr,r,mont,ctx);
-	ret=1;
-err:
-	if ((in_mont == NULL) && (mont != NULL)) BN_MONT_CTX_free(mont);
-	BN_CTX_end(ctx);
-	bn_check_top(rr);
-	return(ret);
-	}
diff --git a/crypto/openssl/crypto/bn/bn_gcd.c b/crypto/openssl/crypto/bn/bn_gcd.c
deleted file mode 100644
index f02e6fcdb422..000000000000
--- a/crypto/openssl/crypto/bn/bn_gcd.c
+++ /dev/null
@@ -1,493 +0,0 @@
-/* crypto/bn/bn_gcd.c */
-/* Copyright (C) 1995-1998 Eric Young (eay@cryptsoft.com)
- * All rights reserved.
- *
- * This package is an SSL implementation written
- * by Eric Young (eay@cryptsoft.com).
- * The implementation was written so as to conform with Netscapes SSL.
- * 
- * This library is free for commercial and non-commercial use as long as
- * the following conditions are aheared to.  The following conditions
- * apply to all code found in this distribution, be it the RC4, RSA,
- * lhash, DES, etc., code; not just the SSL code.  The SSL documentation
- * included with this distribution is covered by the same copyright terms
- * except that the holder is Tim Hudson (tjh@cryptsoft.com).
- * 
- * Copyright remains Eric Young's, and as such any Copyright notices in
- * the code are not to be removed.
- * If this package is used in a product, Eric Young should be given attribution
- * as the author of the parts of the library used.
- * This can be in the form of a textual message at program startup or
- * in documentation (online or textual) provided with the package.
- * 
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions
- * are met:
- * 1. Redistributions of source code must retain the copyright
- *    notice, this list of conditions and the following disclaimer.
- * 2. Redistributions in binary form must reproduce the above copyright
- *    notice, this list of conditions and the following disclaimer in the
- *    documentation and/or other materials provided with the distribution.
- * 3. All advertising materials mentioning features or use of this software
- *    must display the following acknowledgement:
- *    "This product includes cryptographic software written by
- *     Eric Young (eay@cryptsoft.com)"
- *    The word 'cryptographic' can be left out if the rouines from the library
- *    being used are not cryptographic related :-).
- * 4. If you include any Windows specific code (or a derivative thereof) from 
- *    the apps directory (application code) you must include an acknowledgement:
- *    "This product includes software written by Tim Hudson (tjh@cryptsoft.com)"
- * 
- * THIS SOFTWARE IS PROVIDED BY ERIC YOUNG ``AS IS'' AND
- * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
- * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
- * ARE DISCLAIMED.  IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE
- * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
- * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
- * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
- * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
- * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
- * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
- * SUCH DAMAGE.
- * 
- * The licence and distribution terms for any publically available version or
- * derivative of this code cannot be changed.  i.e. this code cannot simply be
- * copied and put under another distribution licence
- * [including the GNU Public Licence.]
- */
-/* ====================================================================
- * Copyright (c) 1998-2001 The OpenSSL Project.  All rights reserved.
- *
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions
- * are met:
- *
- * 1. Redistributions of source code must retain the above copyright
- *    notice, this list of conditions and the following disclaimer. 
- *
- * 2. Redistributions in binary form must reproduce the above copyright
- *    notice, this list of conditions and the following disclaimer in
- *    the documentation and/or other materials provided with the
- *    distribution.
- *
- * 3. All advertising materials mentioning features or use of this
- *    software must display the following acknowledgment:
- *    "This product includes software developed by the OpenSSL Project
- *    for use in the OpenSSL Toolkit. (http://www.openssl.org/)"
- *
- * 4. The names "OpenSSL Toolkit" and "OpenSSL Project" must not be used to
- *    endorse or promote products derived from this software without
- *    prior written permission. For written permission, please contact
- *    openssl-core@openssl.org.
- *
- * 5. Products derived from this software may not be called "OpenSSL"
- *    nor may "OpenSSL" appear in their names without prior written
- *    permission of the OpenSSL Project.
- *
- * 6. Redistributions of any form whatsoever must retain the following
- *    acknowledgment:
- *    "This product includes software developed by the OpenSSL Project
- *    for use in the OpenSSL Toolkit (http://www.openssl.org/)"
- *
- * THIS SOFTWARE IS PROVIDED BY THE OpenSSL PROJECT ``AS IS'' AND ANY
- * EXPRESSED OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
- * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR
- * PURPOSE ARE DISCLAIMED.  IN NO EVENT SHALL THE OpenSSL PROJECT OR
- * ITS CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
- * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
- * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
- * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
- * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
- * STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
- * ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED
- * OF THE POSSIBILITY OF SUCH DAMAGE.
- * ====================================================================
- *
- * This product includes cryptographic software written by Eric Young
- * (eay@cryptsoft.com).  This product includes software written by Tim
- * Hudson (tjh@cryptsoft.com).
- *
- */
-
-#include "cryptlib.h"
-#include "bn_lcl.h"
-
-static BIGNUM *euclid(BIGNUM *a, BIGNUM *b);
-
-int BN_gcd(BIGNUM *r, const BIGNUM *in_a, const BIGNUM *in_b, BN_CTX *ctx)
-	{
-	BIGNUM *a,*b,*t;
-	int ret=0;
-
-	bn_check_top(in_a);
-	bn_check_top(in_b);
-
-	BN_CTX_start(ctx);
-	a = BN_CTX_get(ctx);
-	b = BN_CTX_get(ctx);
-	if (a == NULL || b == NULL) goto err;
-
-	if (BN_copy(a,in_a) == NULL) goto err;
-	if (BN_copy(b,in_b) == NULL) goto err;
-	a->neg = 0;
-	b->neg = 0;
-
-	if (BN_cmp(a,b) < 0) { t=a; a=b; b=t; }
-	t=euclid(a,b);
-	if (t == NULL) goto err;
-
-	if (BN_copy(r,t) == NULL) goto err;
-	ret=1;
-err:
-	BN_CTX_end(ctx);
-	bn_check_top(r);
-	return(ret);
-	}
-
-static BIGNUM *euclid(BIGNUM *a, BIGNUM *b)
-	{
-	BIGNUM *t;
-	int shifts=0;
-
-	bn_check_top(a);
-	bn_check_top(b);
-
-	/* 0 <= b <= a */
-	while (!BN_is_zero(b))
-		{
-		/* 0 < b <= a */
-
-		if (BN_is_odd(a))
-			{
-			if (BN_is_odd(b))
-				{
-				if (!BN_sub(a,a,b)) goto err;
-				if (!BN_rshift1(a,a)) goto err;
-				if (BN_cmp(a,b) < 0)
-					{ t=a; a=b; b=t; }
-				}
-			else		/* a odd - b even */
-				{
-				if (!BN_rshift1(b,b)) goto err;
-				if (BN_cmp(a,b) < 0)
-					{ t=a; a=b; b=t; }
-				}
-			}
-		else			/* a is even */
-			{
-			if (BN_is_odd(b))
-				{
-				if (!BN_rshift1(a,a)) goto err;
-				if (BN_cmp(a,b) < 0)
-					{ t=a; a=b; b=t; }
-				}
-			else		/* a even - b even */
-				{
-				if (!BN_rshift1(a,a)) goto err;
-				if (!BN_rshift1(b,b)) goto err;
-				shifts++;
-				}
-			}
-		/* 0 <= b <= a */
-		}
-
-	if (shifts)
-		{
-		if (!BN_lshift(a,a,shifts)) goto err;
-		}
-	bn_check_top(a);
-	return(a);
-err:
-	return(NULL);
-	}
-
-
-/* solves ax == 1 (mod n) */
-BIGNUM *BN_mod_inverse(BIGNUM *in,
-	const BIGNUM *a, const BIGNUM *n, BN_CTX *ctx)
-	{
-	BIGNUM *A,*B,*X,*Y,*M,*D,*T,*R=NULL;
-	BIGNUM *ret=NULL;
-	int sign;
-
-	bn_check_top(a);
-	bn_check_top(n);
-
-	BN_CTX_start(ctx);
-	A = BN_CTX_get(ctx);
-	B = BN_CTX_get(ctx);
-	X = BN_CTX_get(ctx);
-	D = BN_CTX_get(ctx);
-	M = BN_CTX_get(ctx);
-	Y = BN_CTX_get(ctx);
-	T = BN_CTX_get(ctx);
-	if (T == NULL) goto err;
-
-	if (in == NULL)
-		R=BN_new();
-	else
-		R=in;
-	if (R == NULL) goto err;
-
-	BN_one(X);
-	BN_zero(Y);
-	if (BN_copy(B,a) == NULL) goto err;
-	if (BN_copy(A,n) == NULL) goto err;
-	A->neg = 0;
-	if (B->neg || (BN_ucmp(B, A) >= 0))
-		{
-		if (!BN_nnmod(B, B, A, ctx)) goto err;
-		}
-	sign = -1;
-	/* From  B = a mod |n|,  A = |n|  it follows that
-	 *
-	 *      0 <= B < A,
-	 *     -sign*X*a  ==  B   (mod |n|),
-	 *      sign*Y*a  ==  A   (mod |n|).
-	 */
-
-	if (BN_is_odd(n) && (BN_num_bits(n) <= (BN_BITS <= 32 ? 450 : 2048)))
-		{
-		/* Binary inversion algorithm; requires odd modulus.
-		 * This is faster than the general algorithm if the modulus
-		 * is sufficiently small (about 400 .. 500 bits on 32-bit
-		 * sytems, but much more on 64-bit systems) */
-		int shift;
-		
-		while (!BN_is_zero(B))
-			{
-			/*
-			 *      0 < B < |n|,
-			 *      0 < A <= |n|,
-			 * (1) -sign*X*a  ==  B   (mod |n|),
-			 * (2)  sign*Y*a  ==  A   (mod |n|)
-			 */
-
-			/* Now divide  B  by the maximum possible power of two in the integers,
-			 * and divide  X  by the same value mod |n|.
-			 * When we're done, (1) still holds. */
-			shift = 0;
-			while (!BN_is_bit_set(B, shift)) /* note that 0 < B */
-				{
-				shift++;
-				
-				if (BN_is_odd(X))
-					{
-					if (!BN_uadd(X, X, n)) goto err;
-					}
-				/* now X is even, so we can easily divide it by two */
-				if (!BN_rshift1(X, X)) goto err;
-				}
-			if (shift > 0)
-				{
-				if (!BN_rshift(B, B, shift)) goto err;
-				}
-
-
-			/* Same for  A  and  Y.  Afterwards, (2) still holds. */
-			shift = 0;
-			while (!BN_is_bit_set(A, shift)) /* note that 0 < A */
-				{
-				shift++;
-				
-				if (BN_is_odd(Y))
-					{
-					if (!BN_uadd(Y, Y, n)) goto err;
-					}
-				/* now Y is even */
-				if (!BN_rshift1(Y, Y)) goto err;
-				}
-			if (shift > 0)
-				{
-				if (!BN_rshift(A, A, shift)) goto err;
-				}
-
-			
-			/* We still have (1) and (2).
-			 * Both  A  and  B  are odd.
-			 * The following computations ensure that
-			 *
-			 *     0 <= B < |n|,
-			 *      0 < A < |n|,
-			 * (1) -sign*X*a  ==  B   (mod |n|),
-			 * (2)  sign*Y*a  ==  A   (mod |n|),
-			 *
-			 * and that either  A  or  B  is even in the next iteration.
-			 */
-			if (BN_ucmp(B, A) >= 0)
-				{
-				/* -sign*(X + Y)*a == B - A  (mod |n|) */
-				if (!BN_uadd(X, X, Y)) goto err;
-				/* NB: we could use BN_mod_add_quick(X, X, Y, n), but that
-				 * actually makes the algorithm slower */
-				if (!BN_usub(B, B, A)) goto err;
-				}
-			else
-				{
-				/*  sign*(X + Y)*a == A - B  (mod |n|) */
-				if (!BN_uadd(Y, Y, X)) goto err;
-				/* as above, BN_mod_add_quick(Y, Y, X, n) would slow things down */
-				if (!BN_usub(A, A, B)) goto err;
-				}
-			}
-		}
-	else
-		{
-		/* general inversion algorithm */
-
-		while (!BN_is_zero(B))
-			{
-			BIGNUM *tmp;
-			
-			/*
-			 *      0 < B < A,
-			 * (*) -sign*X*a  ==  B   (mod |n|),
-			 *      sign*Y*a  ==  A   (mod |n|)
-			 */
-			
-			/* (D, M) := (A/B, A%B) ... */
-			if (BN_num_bits(A) == BN_num_bits(B))
-				{
-				if (!BN_one(D)) goto err;
-				if (!BN_sub(M,A,B)) goto err;
-				}
-			else if (BN_num_bits(A) == BN_num_bits(B) + 1)
-				{
-				/* A/B is 1, 2, or 3 */
-				if (!BN_lshift1(T,B)) goto err;
-				if (BN_ucmp(A,T) < 0)
-					{
-					/* A < 2*B, so D=1 */
-					if (!BN_one(D)) goto err;
-					if (!BN_sub(M,A,B)) goto err;
-					}
-				else
-					{
-					/* A >= 2*B, so D=2 or D=3 */
-					if (!BN_sub(M,A,T)) goto err;
-					if (!BN_add(D,T,B)) goto err; /* use D (:= 3*B) as temp */
-					if (BN_ucmp(A,D) < 0)
-						{
-						/* A < 3*B, so D=2 */
-						if (!BN_set_word(D,2)) goto err;
-						/* M (= A - 2*B) already has the correct value */
-						}
-					else
-						{
-						/* only D=3 remains */
-						if (!BN_set_word(D,3)) goto err;
-						/* currently  M = A - 2*B,  but we need  M = A - 3*B */
-						if (!BN_sub(M,M,B)) goto err;
-						}
-					}
-				}
-			else
-				{
-				if (!BN_div(D,M,A,B,ctx)) goto err;
-				}
-			
-			/* Now
-			 *      A = D*B + M;
-			 * thus we have
-			 * (**)  sign*Y*a  ==  D*B + M   (mod |n|).
-			 */
-			
-			tmp=A; /* keep the BIGNUM object, the value does not matter */
-			
-			/* (A, B) := (B, A mod B) ... */
-			A=B;
-			B=M;
-			/* ... so we have  0 <= B < A  again */
-			
-			/* Since the former  M  is now  B  and the former  B  is now  A,
-			 * (**) translates into
-			 *       sign*Y*a  ==  D*A + B    (mod |n|),
-			 * i.e.
-			 *       sign*Y*a - D*A  ==  B    (mod |n|).
-			 * Similarly, (*) translates into
-			 *      -sign*X*a  ==  A          (mod |n|).
-			 *
-			 * Thus,
-			 *   sign*Y*a + D*sign*X*a  ==  B  (mod |n|),
-			 * i.e.
-			 *        sign*(Y + D*X)*a  ==  B  (mod |n|).
-			 *
-			 * So if we set  (X, Y, sign) := (Y + D*X, X, -sign),  we arrive back at
-			 *      -sign*X*a  ==  B   (mod |n|),
-			 *       sign*Y*a  ==  A   (mod |n|).
-			 * Note that  X  and  Y  stay non-negative all the time.
-			 */
-			
-			/* most of the time D is very small, so we can optimize tmp := D*X+Y */
-			if (BN_is_one(D))
-				{
-				if (!BN_add(tmp,X,Y)) goto err;
-				}
-			else
-				{
-				if (BN_is_word(D,2))
-					{
-					if (!BN_lshift1(tmp,X)) goto err;
-					}
-				else if (BN_is_word(D,4))
-					{
-					if (!BN_lshift(tmp,X,2)) goto err;
-					}
-				else if (D->top == 1)
-					{
-					if (!BN_copy(tmp,X)) goto err;
-					if (!BN_mul_word(tmp,D->d[0])) goto err;
-					}
-				else
-					{
-					if (!BN_mul(tmp,D,X,ctx)) goto err;
-					}
-				if (!BN_add(tmp,tmp,Y)) goto err;
-				}
-			
-			M=Y; /* keep the BIGNUM object, the value does not matter */
-			Y=X;
-			X=tmp;
-			sign = -sign;
-			}
-		}
-		
-	/*
-	 * The while loop (Euclid's algorithm) ends when
-	 *      A == gcd(a,n);
-	 * we have
-	 *       sign*Y*a  ==  A  (mod |n|),
-	 * where  Y  is non-negative.
-	 */
-
-	if (sign < 0)
-		{
-		if (!BN_sub(Y,n,Y)) goto err;
-		}
-	/* Now  Y*a  ==  A  (mod |n|).  */
-	
-
-	if (BN_is_one(A))
-		{
-		/* Y*a == 1  (mod |n|) */
-		if (!Y->neg && BN_ucmp(Y,n) < 0)
-			{
-			if (!BN_copy(R,Y)) goto err;
-			}
-		else
-			{
-			if (!BN_nnmod(R,Y,n,ctx)) goto err;
-			}
-		}
-	else
-		{
-		BNerr(BN_F_BN_MOD_INVERSE,BN_R_NO_INVERSE);
-		goto err;
-		}
-	ret=R;
-err:
-	if ((ret == NULL) && (in == NULL)) BN_free(R);
-	BN_CTX_end(ctx);
-	bn_check_top(ret);
-	return(ret);
-	}
diff --git a/crypto/openssl/crypto/bn/bn_gf2m.c b/crypto/openssl/crypto/bn/bn_gf2m.c
deleted file mode 100644
index 6a793857e130..000000000000
--- a/crypto/openssl/crypto/bn/bn_gf2m.c
+++ /dev/null
@@ -1,1091 +0,0 @@
-/* crypto/bn/bn_gf2m.c */
-/* ====================================================================
- * Copyright 2002 Sun Microsystems, Inc. ALL RIGHTS RESERVED.
- *
- * The Elliptic Curve Public-Key Crypto Library (ECC Code) included
- * herein is developed by SUN MICROSYSTEMS, INC., and is contributed
- * to the OpenSSL project.
- *
- * The ECC Code is licensed pursuant to the OpenSSL open source
- * license provided below.
- *
- * In addition, Sun covenants to all licensees who provide a reciprocal
- * covenant with respect to their own patents if any, not to sue under
- * current and future patent claims necessarily infringed by the making,
- * using, practicing, selling, offering for sale and/or otherwise
- * disposing of the ECC Code as delivered hereunder (or portions thereof),
- * provided that such covenant shall not apply:
- *  1) for code that a licensee deletes from the ECC Code;
- *  2) separates from the ECC Code; or
- *  3) for infringements caused by:
- *       i) the modification of the ECC Code or
- *      ii) the combination of the ECC Code with other software or
- *          devices where such combination causes the infringement.
- *
- * The software is originally written by Sheueling Chang Shantz and
- * Douglas Stebila of Sun Microsystems Laboratories.
- *
- */
-
-/* NOTE: This file is licensed pursuant to the OpenSSL license below
- * and may be modified; but after modifications, the above covenant
- * may no longer apply!  In such cases, the corresponding paragraph
- * ["In addition, Sun covenants ... causes the infringement."] and
- * this note can be edited out; but please keep the Sun copyright
- * notice and attribution. */
-
-/* ====================================================================
- * Copyright (c) 1998-2002 The OpenSSL Project.  All rights reserved.
- *
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions
- * are met:
- *
- * 1. Redistributions of source code must retain the above copyright
- *    notice, this list of conditions and the following disclaimer. 
- *
- * 2. Redistributions in binary form must reproduce the above copyright
- *    notice, this list of conditions and the following disclaimer in
- *    the documentation and/or other materials provided with the
- *    distribution.
- *
- * 3. All advertising materials mentioning features or use of this
- *    software must display the following acknowledgment:
- *    "This product includes software developed by the OpenSSL Project
- *    for use in the OpenSSL Toolkit. (http://www.openssl.org/)"
- *
- * 4. The names "OpenSSL Toolkit" and "OpenSSL Project" must not be used to
- *    endorse or promote products derived from this software without
- *    prior written permission. For written permission, please contact
- *    openssl-core@openssl.org.
- *
- * 5. Products derived from this software may not be called "OpenSSL"
- *    nor may "OpenSSL" appear in their names without prior written
- *    permission of the OpenSSL Project.
- *
- * 6. Redistributions of any form whatsoever must retain the following
- *    acknowledgment:
- *    "This product includes software developed by the OpenSSL Project
- *    for use in the OpenSSL Toolkit (http://www.openssl.org/)"
- *
- * THIS SOFTWARE IS PROVIDED BY THE OpenSSL PROJECT ``AS IS'' AND ANY
- * EXPRESSED OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
- * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR
- * PURPOSE ARE DISCLAIMED.  IN NO EVENT SHALL THE OpenSSL PROJECT OR
- * ITS CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
- * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
- * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
- * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
- * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
- * STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
- * ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED
- * OF THE POSSIBILITY OF SUCH DAMAGE.
- * ====================================================================
- *
- * This product includes cryptographic software written by Eric Young
- * (eay@cryptsoft.com).  This product includes software written by Tim
- * Hudson (tjh@cryptsoft.com).
- *
- */
-
-#include <assert.h>
-#include <limits.h>
-#include <stdio.h>
-#include "cryptlib.h"
-#include "bn_lcl.h"
-
-/* Maximum number of iterations before BN_GF2m_mod_solve_quad_arr should fail. */
-#define MAX_ITERATIONS 50
-
-static const BN_ULONG SQR_tb[16] =
-  {     0,     1,     4,     5,    16,    17,    20,    21,
-       64,    65,    68,    69,    80,    81,    84,    85 };
-/* Platform-specific macros to accelerate squaring. */
-#if defined(SIXTY_FOUR_BIT) || defined(SIXTY_FOUR_BIT_LONG)
-#define SQR1(w) \
-    SQR_tb[(w) >> 60 & 0xF] << 56 | SQR_tb[(w) >> 56 & 0xF] << 48 | \
-    SQR_tb[(w) >> 52 & 0xF] << 40 | SQR_tb[(w) >> 48 & 0xF] << 32 | \
-    SQR_tb[(w) >> 44 & 0xF] << 24 | SQR_tb[(w) >> 40 & 0xF] << 16 | \
-    SQR_tb[(w) >> 36 & 0xF] <<  8 | SQR_tb[(w) >> 32 & 0xF]
-#define SQR0(w) \
-    SQR_tb[(w) >> 28 & 0xF] << 56 | SQR_tb[(w) >> 24 & 0xF] << 48 | \
-    SQR_tb[(w) >> 20 & 0xF] << 40 | SQR_tb[(w) >> 16 & 0xF] << 32 | \
-    SQR_tb[(w) >> 12 & 0xF] << 24 | SQR_tb[(w) >>  8 & 0xF] << 16 | \
-    SQR_tb[(w) >>  4 & 0xF] <<  8 | SQR_tb[(w)       & 0xF]
-#endif
-#ifdef THIRTY_TWO_BIT
-#define SQR1(w) \
-    SQR_tb[(w) >> 28 & 0xF] << 24 | SQR_tb[(w) >> 24 & 0xF] << 16 | \
-    SQR_tb[(w) >> 20 & 0xF] <<  8 | SQR_tb[(w) >> 16 & 0xF]
-#define SQR0(w) \
-    SQR_tb[(w) >> 12 & 0xF] << 24 | SQR_tb[(w) >>  8 & 0xF] << 16 | \
-    SQR_tb[(w) >>  4 & 0xF] <<  8 | SQR_tb[(w)       & 0xF]
-#endif
-#ifdef SIXTEEN_BIT
-#define SQR1(w) \
-    SQR_tb[(w) >> 12 & 0xF] <<  8 | SQR_tb[(w) >>  8 & 0xF]
-#define SQR0(w) \
-    SQR_tb[(w) >>  4 & 0xF] <<  8 | SQR_tb[(w)       & 0xF]
-#endif
-#ifdef EIGHT_BIT
-#define SQR1(w) \
-    SQR_tb[(w) >>  4 & 0xF]
-#define SQR0(w) \
-    SQR_tb[(w)       & 15]
-#endif
-
-/* Product of two polynomials a, b each with degree < BN_BITS2 - 1,
- * result is a polynomial r with degree < 2 * BN_BITS - 1
- * The caller MUST ensure that the variables have the right amount
- * of space allocated.
- */
-#ifdef EIGHT_BIT
-static void bn_GF2m_mul_1x1(BN_ULONG *r1, BN_ULONG *r0, const BN_ULONG a, const BN_ULONG b)
-	{
-	register BN_ULONG h, l, s;
-	BN_ULONG tab[4], top1b = a >> 7;
-	register BN_ULONG a1, a2;
-
-	a1 = a & (0x7F); a2 = a1 << 1;
-
-	tab[0] = 0; tab[1] = a1; tab[2] = a2; tab[3] = a1^a2;
-
-	s = tab[b      & 0x3]; l  = s;
-	s = tab[b >> 2 & 0x3]; l ^= s << 2; h  = s >> 6;
-	s = tab[b >> 4 & 0x3]; l ^= s << 4; h ^= s >> 4;
-	s = tab[b >> 6      ]; l ^= s << 6; h ^= s >> 2;
-	
-	/* compensate for the top bit of a */
-
-	if (top1b & 01) { l ^= b << 7; h ^= b >> 1; } 
-
-	*r1 = h; *r0 = l;
-	} 
-#endif
-#ifdef SIXTEEN_BIT
-static void bn_GF2m_mul_1x1(BN_ULONG *r1, BN_ULONG *r0, const BN_ULONG a, const BN_ULONG b)
-	{
-	register BN_ULONG h, l, s;
-	BN_ULONG tab[4], top1b = a >> 15; 
-	register BN_ULONG a1, a2;
-
-	a1 = a & (0x7FFF); a2 = a1 << 1;
-
-	tab[0] = 0; tab[1] = a1; tab[2] = a2; tab[3] = a1^a2;
-
-	s = tab[b      & 0x3]; l  = s;
-	s = tab[b >> 2 & 0x3]; l ^= s <<  2; h  = s >> 14;
-	s = tab[b >> 4 & 0x3]; l ^= s <<  4; h ^= s >> 12;
-	s = tab[b >> 6 & 0x3]; l ^= s <<  6; h ^= s >> 10;
-	s = tab[b >> 8 & 0x3]; l ^= s <<  8; h ^= s >>  8;
-	s = tab[b >>10 & 0x3]; l ^= s << 10; h ^= s >>  6;
-	s = tab[b >>12 & 0x3]; l ^= s << 12; h ^= s >>  4;
-	s = tab[b >>14      ]; l ^= s << 14; h ^= s >>  2;
-
-	/* compensate for the top bit of a */
-
-	if (top1b & 01) { l ^= b << 15; h ^= b >> 1; } 
-
-	*r1 = h; *r0 = l;
-	} 
-#endif
-#ifdef THIRTY_TWO_BIT
-static void bn_GF2m_mul_1x1(BN_ULONG *r1, BN_ULONG *r0, const BN_ULONG a, const BN_ULONG b)
-	{
-	register BN_ULONG h, l, s;
-	BN_ULONG tab[8], top2b = a >> 30; 
-	register BN_ULONG a1, a2, a4;
-
-	a1 = a & (0x3FFFFFFF); a2 = a1 << 1; a4 = a2 << 1;
-
-	tab[0] =  0; tab[1] = a1;    tab[2] = a2;    tab[3] = a1^a2;
-	tab[4] = a4; tab[5] = a1^a4; tab[6] = a2^a4; tab[7] = a1^a2^a4;
-
-	s = tab[b       & 0x7]; l  = s;
-	s = tab[b >>  3 & 0x7]; l ^= s <<  3; h  = s >> 29;
-	s = tab[b >>  6 & 0x7]; l ^= s <<  6; h ^= s >> 26;
-	s = tab[b >>  9 & 0x7]; l ^= s <<  9; h ^= s >> 23;
-	s = tab[b >> 12 & 0x7]; l ^= s << 12; h ^= s >> 20;
-	s = tab[b >> 15 & 0x7]; l ^= s << 15; h ^= s >> 17;
-	s = tab[b >> 18 & 0x7]; l ^= s << 18; h ^= s >> 14;
-	s = tab[b >> 21 & 0x7]; l ^= s << 21; h ^= s >> 11;
-	s = tab[b >> 24 & 0x7]; l ^= s << 24; h ^= s >>  8;
-	s = tab[b >> 27 & 0x7]; l ^= s << 27; h ^= s >>  5;
-	s = tab[b >> 30      ]; l ^= s << 30; h ^= s >>  2;
-
-	/* compensate for the top two bits of a */
-
-	if (top2b & 01) { l ^= b << 30; h ^= b >> 2; } 
-	if (top2b & 02) { l ^= b << 31; h ^= b >> 1; } 
-
-	*r1 = h; *r0 = l;
-	} 
-#endif
-#if defined(SIXTY_FOUR_BIT) || defined(SIXTY_FOUR_BIT_LONG)
-static void bn_GF2m_mul_1x1(BN_ULONG *r1, BN_ULONG *r0, const BN_ULONG a, const BN_ULONG b)
-	{
-	register BN_ULONG h, l, s;
-	BN_ULONG tab[16], top3b = a >> 61;
-	register BN_ULONG a1, a2, a4, a8;
-
-	a1 = a & (0x1FFFFFFFFFFFFFFFULL); a2 = a1 << 1; a4 = a2 << 1; a8 = a4 << 1;
-
-	tab[ 0] = 0;     tab[ 1] = a1;       tab[ 2] = a2;       tab[ 3] = a1^a2;
-	tab[ 4] = a4;    tab[ 5] = a1^a4;    tab[ 6] = a2^a4;    tab[ 7] = a1^a2^a4;
-	tab[ 8] = a8;    tab[ 9] = a1^a8;    tab[10] = a2^a8;    tab[11] = a1^a2^a8;
-	tab[12] = a4^a8; tab[13] = a1^a4^a8; tab[14] = a2^a4^a8; tab[15] = a1^a2^a4^a8;
-
-	s = tab[b       & 0xF]; l  = s;
-	s = tab[b >>  4 & 0xF]; l ^= s <<  4; h  = s >> 60;
-	s = tab[b >>  8 & 0xF]; l ^= s <<  8; h ^= s >> 56;
-	s = tab[b >> 12 & 0xF]; l ^= s << 12; h ^= s >> 52;
-	s = tab[b >> 16 & 0xF]; l ^= s << 16; h ^= s >> 48;
-	s = tab[b >> 20 & 0xF]; l ^= s << 20; h ^= s >> 44;
-	s = tab[b >> 24 & 0xF]; l ^= s << 24; h ^= s >> 40;
-	s = tab[b >> 28 & 0xF]; l ^= s << 28; h ^= s >> 36;
-	s = tab[b >> 32 & 0xF]; l ^= s << 32; h ^= s >> 32;
-	s = tab[b >> 36 & 0xF]; l ^= s << 36; h ^= s >> 28;
-	s = tab[b >> 40 & 0xF]; l ^= s << 40; h ^= s >> 24;
-	s = tab[b >> 44 & 0xF]; l ^= s << 44; h ^= s >> 20;
-	s = tab[b >> 48 & 0xF]; l ^= s << 48; h ^= s >> 16;
-	s = tab[b >> 52 & 0xF]; l ^= s << 52; h ^= s >> 12;
-	s = tab[b >> 56 & 0xF]; l ^= s << 56; h ^= s >>  8;
-	s = tab[b >> 60      ]; l ^= s << 60; h ^= s >>  4;
-
-	/* compensate for the top three bits of a */
-
-	if (top3b & 01) { l ^= b << 61; h ^= b >> 3; } 
-	if (top3b & 02) { l ^= b << 62; h ^= b >> 2; } 
-	if (top3b & 04) { l ^= b << 63; h ^= b >> 1; } 
-
-	*r1 = h; *r0 = l;
-	} 
-#endif
-
-/* Product of two polynomials a, b each with degree < 2 * BN_BITS2 - 1,
- * result is a polynomial r with degree < 4 * BN_BITS2 - 1
- * The caller MUST ensure that the variables have the right amount
- * of space allocated.
- */
-static void bn_GF2m_mul_2x2(BN_ULONG *r, const BN_ULONG a1, const BN_ULONG a0, const BN_ULONG b1, const BN_ULONG b0)
-	{
-	BN_ULONG m1, m0;
-	/* r[3] = h1, r[2] = h0; r[1] = l1; r[0] = l0 */
-	bn_GF2m_mul_1x1(r+3, r+2, a1, b1);
-	bn_GF2m_mul_1x1(r+1, r, a0, b0);
-	bn_GF2m_mul_1x1(&m1, &m0, a0 ^ a1, b0 ^ b1);
-	/* Correction on m1 ^= l1 ^ h1; m0 ^= l0 ^ h0; */
-	r[2] ^= m1 ^ r[1] ^ r[3];  /* h0 ^= m1 ^ l1 ^ h1; */
-	r[1] = r[3] ^ r[2] ^ r[0] ^ m1 ^ m0;  /* l1 ^= l0 ^ h0 ^ m0; */
-	}
-
-
-/* Add polynomials a and b and store result in r; r could be a or b, a and b 
- * could be equal; r is the bitwise XOR of a and b.
- */
-int	BN_GF2m_add(BIGNUM *r, const BIGNUM *a, const BIGNUM *b)
-	{
-	int i;
-	const BIGNUM *at, *bt;
-
-	bn_check_top(a);
-	bn_check_top(b);
-
-	if (a->top < b->top) { at = b; bt = a; }
-	else { at = a; bt = b; }
-
-	bn_wexpand(r, at->top);
-
-	for (i = 0; i < bt->top; i++)
-		{
-		r->d[i] = at->d[i] ^ bt->d[i];
-		}
-	for (; i < at->top; i++)
-		{
-		r->d[i] = at->d[i];
-		}
-	
-	r->top = at->top;
-	bn_correct_top(r);
-	
-	return 1;
-	}
-
-
-/* Some functions allow for representation of the irreducible polynomials
- * as an int[], say p.  The irreducible f(t) is then of the form:
- *     t^p[0] + t^p[1] + ... + t^p[k]
- * where m = p[0] > p[1] > ... > p[k] = 0.
- */
-
-
-/* Performs modular reduction of a and store result in r.  r could be a. */
-int BN_GF2m_mod_arr(BIGNUM *r, const BIGNUM *a, const unsigned int p[])
-	{
-	int j, k;
-	int n, dN, d0, d1;
-	BN_ULONG zz, *z;
-
-	bn_check_top(a);
-
-	if (!p[0])
-		{
-		/* reduction mod 1 => return 0 */
-		BN_zero(r);
-		return 1;
-		}
-
-	/* Since the algorithm does reduction in the r value, if a != r, copy
-	 * the contents of a into r so we can do reduction in r. 
-	 */
-	if (a != r)
-		{
-		if (!bn_wexpand(r, a->top)) return 0;
-		for (j = 0; j < a->top; j++)
-			{
-			r->d[j] = a->d[j];
-			}
-		r->top = a->top;
-		}
-	z = r->d;
-
-	/* start reduction */
-	dN = p[0] / BN_BITS2;  
-	for (j = r->top - 1; j > dN;)
-		{
-		zz = z[j];
-		if (z[j] == 0) { j--; continue; }
-		z[j] = 0;
-
-		for (k = 1; p[k] != 0; k++)
-			{
-			/* reducing component t^p[k] */
-			n = p[0] - p[k];
-			d0 = n % BN_BITS2;  d1 = BN_BITS2 - d0;
-			n /= BN_BITS2; 
-			z[j-n] ^= (zz>>d0);
-			if (d0) z[j-n-1] ^= (zz<<d1);
-			}
-
-		/* reducing component t^0 */
-		n = dN;  
-		d0 = p[0] % BN_BITS2;
-		d1 = BN_BITS2 - d0;
-		z[j-n] ^= (zz >> d0);
-		if (d0) z[j-n-1] ^= (zz << d1);
-		}
-
-	/* final round of reduction */
-	while (j == dN)
-		{
-
-		d0 = p[0] % BN_BITS2;
-		zz = z[dN] >> d0;
-		if (zz == 0) break;
-		d1 = BN_BITS2 - d0;
-		
-		if (d0) z[dN] = (z[dN] << d1) >> d1; /* clear up the top d1 bits */
-		z[0] ^= zz; /* reduction t^0 component */
-
-		for (k = 1; p[k] != 0; k++)
-			{
-			BN_ULONG tmp_ulong;
-
-			/* reducing component t^p[k]*/
-			n = p[k] / BN_BITS2;   
-			d0 = p[k] % BN_BITS2;
-			d1 = BN_BITS2 - d0;
-			z[n] ^= (zz << d0);
-			tmp_ulong = zz >> d1;
-                        if (d0 && tmp_ulong)
-                                z[n+1] ^= tmp_ulong;
-			}
-
-		
-		}
-
-	bn_correct_top(r);
-	return 1;
-	}
-
-/* Performs modular reduction of a by p and store result in r.  r could be a.
- *
- * This function calls down to the BN_GF2m_mod_arr implementation; this wrapper
- * function is only provided for convenience; for best performance, use the 
- * BN_GF2m_mod_arr function.
- */
-int	BN_GF2m_mod(BIGNUM *r, const BIGNUM *a, const BIGNUM *p)
-	{
-	int ret = 0;
-	const int max = BN_num_bits(p);
-	unsigned int *arr=NULL;
-	bn_check_top(a);
-	bn_check_top(p);
-	if ((arr = (unsigned int *)OPENSSL_malloc(sizeof(unsigned int) * max)) == NULL) goto err;
-	ret = BN_GF2m_poly2arr(p, arr, max);
-	if (!ret || ret > max)
-		{
-		BNerr(BN_F_BN_GF2M_MOD,BN_R_INVALID_LENGTH);
-		goto err;
-		}
-	ret = BN_GF2m_mod_arr(r, a, arr);
-	bn_check_top(r);
-err:
-	if (arr) OPENSSL_free(arr);
-	return ret;
-	}
-
-
-/* Compute the product of two polynomials a and b, reduce modulo p, and store
- * the result in r.  r could be a or b; a could be b.
- */
-int	BN_GF2m_mod_mul_arr(BIGNUM *r, const BIGNUM *a, const BIGNUM *b, const unsigned int p[], BN_CTX *ctx)
-	{
-	int zlen, i, j, k, ret = 0;
-	BIGNUM *s;
-	BN_ULONG x1, x0, y1, y0, zz[4];
-
-	bn_check_top(a);
-	bn_check_top(b);
-
-	if (a == b)
-		{
-		return BN_GF2m_mod_sqr_arr(r, a, p, ctx);
-		}
-
-	BN_CTX_start(ctx);
-	if ((s = BN_CTX_get(ctx)) == NULL) goto err;
-	
-	zlen = a->top + b->top + 4;
-	if (!bn_wexpand(s, zlen)) goto err;
-	s->top = zlen;
-
-	for (i = 0; i < zlen; i++) s->d[i] = 0;
-
-	for (j = 0; j < b->top; j += 2)
-		{
-		y0 = b->d[j];
-		y1 = ((j+1) == b->top) ? 0 : b->d[j+1];
-		for (i = 0; i < a->top; i += 2)
-			{
-			x0 = a->d[i];
-			x1 = ((i+1) == a->top) ? 0 : a->d[i+1];
-			bn_GF2m_mul_2x2(zz, x1, x0, y1, y0);
-			for (k = 0; k < 4; k++) s->d[i+j+k] ^= zz[k];
-			}
-		}
-
-	bn_correct_top(s);
-	if (BN_GF2m_mod_arr(r, s, p))
-		ret = 1;
-	bn_check_top(r);
-
-err:
-	BN_CTX_end(ctx);
-	return ret;
-	}
-
-/* Compute the product of two polynomials a and b, reduce modulo p, and store
- * the result in r.  r could be a or b; a could equal b.
- *
- * This function calls down to the BN_GF2m_mod_mul_arr implementation; this wrapper
- * function is only provided for convenience; for best performance, use the 
- * BN_GF2m_mod_mul_arr function.
- */
-int	BN_GF2m_mod_mul(BIGNUM *r, const BIGNUM *a, const BIGNUM *b, const BIGNUM *p, BN_CTX *ctx)
-	{
-	int ret = 0;
-	const int max = BN_num_bits(p);
-	unsigned int *arr=NULL;
-	bn_check_top(a);
-	bn_check_top(b);
-	bn_check_top(p);
-	if ((arr = (unsigned int *)OPENSSL_malloc(sizeof(unsigned int) * max)) == NULL) goto err;
-	ret = BN_GF2m_poly2arr(p, arr, max);
-	if (!ret || ret > max)
-		{
-		BNerr(BN_F_BN_GF2M_MOD_MUL,BN_R_INVALID_LENGTH);
-		goto err;
-		}
-	ret = BN_GF2m_mod_mul_arr(r, a, b, arr, ctx);
-	bn_check_top(r);
-err:
-	if (arr) OPENSSL_free(arr);
-	return ret;
-	}
-
-
-/* Square a, reduce the result mod p, and store it in a.  r could be a. */
-int	BN_GF2m_mod_sqr_arr(BIGNUM *r, const BIGNUM *a, const unsigned int p[], BN_CTX *ctx)
-	{
-	int i, ret = 0;
-	BIGNUM *s;
-
-	bn_check_top(a);
-	BN_CTX_start(ctx);
-	if ((s = BN_CTX_get(ctx)) == NULL) return 0;
-	if (!bn_wexpand(s, 2 * a->top)) goto err;
-
-	for (i = a->top - 1; i >= 0; i--)
-		{
-		s->d[2*i+1] = SQR1(a->d[i]);
-		s->d[2*i  ] = SQR0(a->d[i]);
-		}
-
-	s->top = 2 * a->top;
-	bn_correct_top(s);
-	if (!BN_GF2m_mod_arr(r, s, p)) goto err;
-	bn_check_top(r);
-	ret = 1;
-err:
-	BN_CTX_end(ctx);
-	return ret;
-	}
-
-/* Square a, reduce the result mod p, and store it in a.  r could be a.
- *
- * This function calls down to the BN_GF2m_mod_sqr_arr implementation; this wrapper
- * function is only provided for convenience; for best performance, use the 
- * BN_GF2m_mod_sqr_arr function.
- */
-int	BN_GF2m_mod_sqr(BIGNUM *r, const BIGNUM *a, const BIGNUM *p, BN_CTX *ctx)
-	{
-	int ret = 0;
-	const int max = BN_num_bits(p);
-	unsigned int *arr=NULL;
-
-	bn_check_top(a);
-	bn_check_top(p);
-	if ((arr = (unsigned int *)OPENSSL_malloc(sizeof(unsigned int) * max)) == NULL) goto err;
-	ret = BN_GF2m_poly2arr(p, arr, max);
-	if (!ret || ret > max)
-		{
-		BNerr(BN_F_BN_GF2M_MOD_SQR,BN_R_INVALID_LENGTH);
-		goto err;
-		}
-	ret = BN_GF2m_mod_sqr_arr(r, a, arr, ctx);
-	bn_check_top(r);
-err:
-	if (arr) OPENSSL_free(arr);
-	return ret;
-	}
-
-
-/* Invert a, reduce modulo p, and store the result in r. r could be a. 
- * Uses Modified Almost Inverse Algorithm (Algorithm 10) from
- *     Hankerson, D., Hernandez, J.L., and Menezes, A.  "Software Implementation
- *     of Elliptic Curve Cryptography Over Binary Fields".
- */
-int BN_GF2m_mod_inv(BIGNUM *r, const BIGNUM *a, const BIGNUM *p, BN_CTX *ctx)
-	{
-	BIGNUM *b, *c, *u, *v, *tmp;
-	int ret = 0;
-
-	bn_check_top(a);
-	bn_check_top(p);
-
-	BN_CTX_start(ctx);
-	
-	b = BN_CTX_get(ctx);
-	c = BN_CTX_get(ctx);
-	u = BN_CTX_get(ctx);
-	v = BN_CTX_get(ctx);
-	if (v == NULL) goto err;
-
-	if (!BN_one(b)) goto err;
-	if (!BN_GF2m_mod(u, a, p)) goto err;
-	if (!BN_copy(v, p)) goto err;
-
-	if (BN_is_zero(u)) goto err;
-
-	while (1)
-		{
-		while (!BN_is_odd(u))
-			{
-			if (!BN_rshift1(u, u)) goto err;
-			if (BN_is_odd(b))
-				{
-				if (!BN_GF2m_add(b, b, p)) goto err;
-				}
-			if (!BN_rshift1(b, b)) goto err;
-			}
-
-		if (BN_abs_is_word(u, 1)) break;
-
-		if (BN_num_bits(u) < BN_num_bits(v))
-			{
-			tmp = u; u = v; v = tmp;
-			tmp = b; b = c; c = tmp;
-			}
-		
-		if (!BN_GF2m_add(u, u, v)) goto err;
-		if (!BN_GF2m_add(b, b, c)) goto err;
-		}
-
-
-	if (!BN_copy(r, b)) goto err;
-	bn_check_top(r);
-	ret = 1;
-
-err:
-  	BN_CTX_end(ctx);
-	return ret;
-	}
-
-/* Invert xx, reduce modulo p, and store the result in r. r could be xx. 
- *
- * This function calls down to the BN_GF2m_mod_inv implementation; this wrapper
- * function is only provided for convenience; for best performance, use the 
- * BN_GF2m_mod_inv function.
- */
-int BN_GF2m_mod_inv_arr(BIGNUM *r, const BIGNUM *xx, const unsigned int p[], BN_CTX *ctx)
-	{
-	BIGNUM *field;
-	int ret = 0;
-
-	bn_check_top(xx);
-	BN_CTX_start(ctx);
-	if ((field = BN_CTX_get(ctx)) == NULL) goto err;
-	if (!BN_GF2m_arr2poly(p, field)) goto err;
-	
-	ret = BN_GF2m_mod_inv(r, xx, field, ctx);
-	bn_check_top(r);
-
-err:
-	BN_CTX_end(ctx);
-	return ret;
-	}
-
-
-#ifndef OPENSSL_SUN_GF2M_DIV
-/* Divide y by x, reduce modulo p, and store the result in r. r could be x 
- * or y, x could equal y.
- */
-int BN_GF2m_mod_div(BIGNUM *r, const BIGNUM *y, const BIGNUM *x, const BIGNUM *p, BN_CTX *ctx)
-	{
-	BIGNUM *xinv = NULL;
-	int ret = 0;
-
-	bn_check_top(y);
-	bn_check_top(x);
-	bn_check_top(p);
-
-	BN_CTX_start(ctx);
-	xinv = BN_CTX_get(ctx);
-	if (xinv == NULL) goto err;
-	
-	if (!BN_GF2m_mod_inv(xinv, x, p, ctx)) goto err;
-	if (!BN_GF2m_mod_mul(r, y, xinv, p, ctx)) goto err;
-	bn_check_top(r);
-	ret = 1;
-
-err:
-	BN_CTX_end(ctx);
-	return ret;
-	}
-#else
-/* Divide y by x, reduce modulo p, and store the result in r. r could be x 
- * or y, x could equal y.
- * Uses algorithm Modular_Division_GF(2^m) from 
- *     Chang-Shantz, S.  "From Euclid's GCD to Montgomery Multiplication to 
- *     the Great Divide".
- */
-int BN_GF2m_mod_div(BIGNUM *r, const BIGNUM *y, const BIGNUM *x, const BIGNUM *p, BN_CTX *ctx)
-	{
-	BIGNUM *a, *b, *u, *v;
-	int ret = 0;
-
-	bn_check_top(y);
-	bn_check_top(x);
-	bn_check_top(p);
-
-	BN_CTX_start(ctx);
-	
-	a = BN_CTX_get(ctx);
-	b = BN_CTX_get(ctx);
-	u = BN_CTX_get(ctx);
-	v = BN_CTX_get(ctx);
-	if (v == NULL) goto err;
-
-	/* reduce x and y mod p */
-	if (!BN_GF2m_mod(u, y, p)) goto err;
-	if (!BN_GF2m_mod(a, x, p)) goto err;
-	if (!BN_copy(b, p)) goto err;
-	
-	while (!BN_is_odd(a))
-		{
-		if (!BN_rshift1(a, a)) goto err;
-		if (BN_is_odd(u)) if (!BN_GF2m_add(u, u, p)) goto err;
-		if (!BN_rshift1(u, u)) goto err;
-		}
-
-	do
-		{
-		if (BN_GF2m_cmp(b, a) > 0)
-			{
-			if (!BN_GF2m_add(b, b, a)) goto err;
-			if (!BN_GF2m_add(v, v, u)) goto err;
-			do
-				{
-				if (!BN_rshift1(b, b)) goto err;
-				if (BN_is_odd(v)) if (!BN_GF2m_add(v, v, p)) goto err;
-				if (!BN_rshift1(v, v)) goto err;
-				} while (!BN_is_odd(b));
-			}
-		else if (BN_abs_is_word(a, 1))
-			break;
-		else
-			{
-			if (!BN_GF2m_add(a, a, b)) goto err;
-			if (!BN_GF2m_add(u, u, v)) goto err;
-			do
-				{
-				if (!BN_rshift1(a, a)) goto err;
-				if (BN_is_odd(u)) if (!BN_GF2m_add(u, u, p)) goto err;
-				if (!BN_rshift1(u, u)) goto err;
-				} while (!BN_is_odd(a));
-			}
-		} while (1);
-
-	if (!BN_copy(r, u)) goto err;
-	bn_check_top(r);
-	ret = 1;
-
-err:
-  	BN_CTX_end(ctx);
-	return ret;
-	}
-#endif
-
-/* Divide yy by xx, reduce modulo p, and store the result in r. r could be xx 
- * or yy, xx could equal yy.
- *
- * This function calls down to the BN_GF2m_mod_div implementation; this wrapper
- * function is only provided for convenience; for best performance, use the 
- * BN_GF2m_mod_div function.
- */
-int BN_GF2m_mod_div_arr(BIGNUM *r, const BIGNUM *yy, const BIGNUM *xx, const unsigned int p[], BN_CTX *ctx)
-	{
-	BIGNUM *field;
-	int ret = 0;
-
-	bn_check_top(yy);
-	bn_check_top(xx);
-
-	BN_CTX_start(ctx);
-	if ((field = BN_CTX_get(ctx)) == NULL) goto err;
-	if (!BN_GF2m_arr2poly(p, field)) goto err;
-	
-	ret = BN_GF2m_mod_div(r, yy, xx, field, ctx);
-	bn_check_top(r);
-
-err:
-	BN_CTX_end(ctx);
-	return ret;
-	}
-
-
-/* Compute the bth power of a, reduce modulo p, and store
- * the result in r.  r could be a.
- * Uses simple square-and-multiply algorithm A.5.1 from IEEE P1363.
- */
-int	BN_GF2m_mod_exp_arr(BIGNUM *r, const BIGNUM *a, const BIGNUM *b, const unsigned int p[], BN_CTX *ctx)
-	{
-	int ret = 0, i, n;
-	BIGNUM *u;
-
-	bn_check_top(a);
-	bn_check_top(b);
-
-	if (BN_is_zero(b))
-		return(BN_one(r));
-
-	if (BN_abs_is_word(b, 1))
-		return (BN_copy(r, a) != NULL);
-
-	BN_CTX_start(ctx);
-	if ((u = BN_CTX_get(ctx)) == NULL) goto err;
-	
-	if (!BN_GF2m_mod_arr(u, a, p)) goto err;
-	
-	n = BN_num_bits(b) - 1;
-	for (i = n - 1; i >= 0; i--)
-		{
-		if (!BN_GF2m_mod_sqr_arr(u, u, p, ctx)) goto err;
-		if (BN_is_bit_set(b, i))
-			{
-			if (!BN_GF2m_mod_mul_arr(u, u, a, p, ctx)) goto err;
-			}
-		}
-	if (!BN_copy(r, u)) goto err;
-	bn_check_top(r);
-	ret = 1;
-err:
-	BN_CTX_end(ctx);
-	return ret;
-	}
-
-/* Compute the bth power of a, reduce modulo p, and store
- * the result in r.  r could be a.
- *
- * This function calls down to the BN_GF2m_mod_exp_arr implementation; this wrapper
- * function is only provided for convenience; for best performance, use the 
- * BN_GF2m_mod_exp_arr function.
- */
-int BN_GF2m_mod_exp(BIGNUM *r, const BIGNUM *a, const BIGNUM *b, const BIGNUM *p, BN_CTX *ctx)
-	{
-	int ret = 0;
-	const int max = BN_num_bits(p);
-	unsigned int *arr=NULL;
-	bn_check_top(a);
-	bn_check_top(b);
-	bn_check_top(p);
-	if ((arr = (unsigned int *)OPENSSL_malloc(sizeof(unsigned int) * max)) == NULL) goto err;
-	ret = BN_GF2m_poly2arr(p, arr, max);
-	if (!ret || ret > max)
-		{
-		BNerr(BN_F_BN_GF2M_MOD_EXP,BN_R_INVALID_LENGTH);
-		goto err;
-		}
-	ret = BN_GF2m_mod_exp_arr(r, a, b, arr, ctx);
-	bn_check_top(r);
-err:
-	if (arr) OPENSSL_free(arr);
-	return ret;
-	}
-
-/* Compute the square root of a, reduce modulo p, and store
- * the result in r.  r could be a.
- * Uses exponentiation as in algorithm A.4.1 from IEEE P1363.
- */
-int	BN_GF2m_mod_sqrt_arr(BIGNUM *r, const BIGNUM *a, const unsigned int p[], BN_CTX *ctx)
-	{
-	int ret = 0;
-	BIGNUM *u;
-
-	bn_check_top(a);
-
-	if (!p[0])
-		{
-		/* reduction mod 1 => return 0 */
-		BN_zero(r);
-		return 1;
-		}
-
-	BN_CTX_start(ctx);
-	if ((u = BN_CTX_get(ctx)) == NULL) goto err;
-	
-	if (!BN_set_bit(u, p[0] - 1)) goto err;
-	ret = BN_GF2m_mod_exp_arr(r, a, u, p, ctx);
-	bn_check_top(r);
-
-err:
-	BN_CTX_end(ctx);
-	return ret;
-	}
-
-/* Compute the square root of a, reduce modulo p, and store
- * the result in r.  r could be a.
- *
- * This function calls down to the BN_GF2m_mod_sqrt_arr implementation; this wrapper
- * function is only provided for convenience; for best performance, use the 
- * BN_GF2m_mod_sqrt_arr function.
- */
-int BN_GF2m_mod_sqrt(BIGNUM *r, const BIGNUM *a, const BIGNUM *p, BN_CTX *ctx)
-	{
-	int ret = 0;
-	const int max = BN_num_bits(p);
-	unsigned int *arr=NULL;
-	bn_check_top(a);
-	bn_check_top(p);
-	if ((arr = (unsigned int *)OPENSSL_malloc(sizeof(unsigned int) * max)) == NULL) goto err;
-	ret = BN_GF2m_poly2arr(p, arr, max);
-	if (!ret || ret > max)
-		{
-		BNerr(BN_F_BN_GF2M_MOD_SQRT,BN_R_INVALID_LENGTH);
-		goto err;
-		}
-	ret = BN_GF2m_mod_sqrt_arr(r, a, arr, ctx);
-	bn_check_top(r);
-err:
-	if (arr) OPENSSL_free(arr);
-	return ret;
-	}
-
-/* Find r such that r^2 + r = a mod p.  r could be a. If no r exists returns 0.
- * Uses algorithms A.4.7 and A.4.6 from IEEE P1363.
- */
-int BN_GF2m_mod_solve_quad_arr(BIGNUM *r, const BIGNUM *a_, const unsigned int p[], BN_CTX *ctx)
-	{
-	int ret = 0, count = 0;
-	unsigned int j;
-	BIGNUM *a, *z, *rho, *w, *w2, *tmp;
-
-	bn_check_top(a_);
-
-	if (!p[0])
-		{
-		/* reduction mod 1 => return 0 */
-		BN_zero(r);
-		return 1;
-		}
-
-	BN_CTX_start(ctx);
-	a = BN_CTX_get(ctx);
-	z = BN_CTX_get(ctx);
-	w = BN_CTX_get(ctx);
-	if (w == NULL) goto err;
-
-	if (!BN_GF2m_mod_arr(a, a_, p)) goto err;
-	
-	if (BN_is_zero(a))
-		{
-		BN_zero(r);
-		ret = 1;
-		goto err;
-		}
-
-	if (p[0] & 0x1) /* m is odd */
-		{
-		/* compute half-trace of a */
-		if (!BN_copy(z, a)) goto err;
-		for (j = 1; j <= (p[0] - 1) / 2; j++)
-			{
-			if (!BN_GF2m_mod_sqr_arr(z, z, p, ctx)) goto err;
-			if (!BN_GF2m_mod_sqr_arr(z, z, p, ctx)) goto err;
-			if (!BN_GF2m_add(z, z, a)) goto err;
-			}
-		
-		}
-	else /* m is even */
-		{
-		rho = BN_CTX_get(ctx);
-		w2 = BN_CTX_get(ctx);
-		tmp = BN_CTX_get(ctx);
-		if (tmp == NULL) goto err;
-		do
-			{
-			if (!BN_rand(rho, p[0], 0, 0)) goto err;
-			if (!BN_GF2m_mod_arr(rho, rho, p)) goto err;
-			BN_zero(z);
-			if (!BN_copy(w, rho)) goto err;
-			for (j = 1; j <= p[0] - 1; j++)
-				{
-				if (!BN_GF2m_mod_sqr_arr(z, z, p, ctx)) goto err;
-				if (!BN_GF2m_mod_sqr_arr(w2, w, p, ctx)) goto err;
-				if (!BN_GF2m_mod_mul_arr(tmp, w2, a, p, ctx)) goto err;
-				if (!BN_GF2m_add(z, z, tmp)) goto err;
-				if (!BN_GF2m_add(w, w2, rho)) goto err;
-				}
-			count++;
-			} while (BN_is_zero(w) && (count < MAX_ITERATIONS));
-		if (BN_is_zero(w))
-			{
-			BNerr(BN_F_BN_GF2M_MOD_SOLVE_QUAD_ARR,BN_R_TOO_MANY_ITERATIONS);
-			goto err;
-			}
-		}
-	
-	if (!BN_GF2m_mod_sqr_arr(w, z, p, ctx)) goto err;
-	if (!BN_GF2m_add(w, z, w)) goto err;
-	if (BN_GF2m_cmp(w, a))
-		{
-		BNerr(BN_F_BN_GF2M_MOD_SOLVE_QUAD_ARR, BN_R_NO_SOLUTION);
-		goto err;
-		}
-
-	if (!BN_copy(r, z)) goto err;
-	bn_check_top(r);
-
-	ret = 1;
-
-err:
-	BN_CTX_end(ctx);
-	return ret;
-	}
-
-/* Find r such that r^2 + r = a mod p.  r could be a. If no r exists returns 0.
- *
- * This function calls down to the BN_GF2m_mod_solve_quad_arr implementation; this wrapper
- * function is only provided for convenience; for best performance, use the 
- * BN_GF2m_mod_solve_quad_arr function.
- */
-int BN_GF2m_mod_solve_quad(BIGNUM *r, const BIGNUM *a, const BIGNUM *p, BN_CTX *ctx)
-	{
-	int ret = 0;
-	const int max = BN_num_bits(p);
-	unsigned int *arr=NULL;
-	bn_check_top(a);
-	bn_check_top(p);
-	if ((arr = (unsigned int *)OPENSSL_malloc(sizeof(unsigned int) *
-						max)) == NULL) goto err;
-	ret = BN_GF2m_poly2arr(p, arr, max);
-	if (!ret || ret > max)
-		{
-		BNerr(BN_F_BN_GF2M_MOD_SOLVE_QUAD,BN_R_INVALID_LENGTH);
-		goto err;
-		}
-	ret = BN_GF2m_mod_solve_quad_arr(r, a, arr, ctx);
-	bn_check_top(r);
-err:
-	if (arr) OPENSSL_free(arr);
-	return ret;
-	}
-
-/* Convert the bit-string representation of a polynomial
- * ( \sum_{i=0}^n a_i * x^i , where a_0 is *not* zero) into an array
- * of integers corresponding to the bits with non-zero coefficient.
- * Up to max elements of the array will be filled.  Return value is total
- * number of coefficients that would be extracted if array was large enough.
- */
-int BN_GF2m_poly2arr(const BIGNUM *a, unsigned int p[], int max)
-	{
-	int i, j, k = 0;
-	BN_ULONG mask;
-
-	if (BN_is_zero(a) || !BN_is_bit_set(a, 0))
-		/* a_0 == 0 => return error (the unsigned int array
-		 * must be terminated by 0)
-		 */
-		return 0;
-
-	for (i = a->top - 1; i >= 0; i--)
-		{
-		if (!a->d[i])
-			/* skip word if a->d[i] == 0 */
-			continue;
-		mask = BN_TBIT;
-		for (j = BN_BITS2 - 1; j >= 0; j--)
-			{
-			if (a->d[i] & mask) 
-				{
-				if (k < max) p[k] = BN_BITS2 * i + j;
-				k++;
-				}
-			mask >>= 1;
-			}
-		}
-
-	return k;
-	}
-
-/* Convert the coefficient array representation of a polynomial to a 
- * bit-string.  The array must be terminated by 0.
- */
-int BN_GF2m_arr2poly(const unsigned int p[], BIGNUM *a)
-	{
-	int i;
-
-	bn_check_top(a);
-	BN_zero(a);
-	for (i = 0; p[i] != 0; i++)
-		{
-		if (BN_set_bit(a, p[i]) == 0)
-			return 0;
-		}
-	BN_set_bit(a, 0);
-	bn_check_top(a);
-
-	return 1;
-	}
-
diff --git a/crypto/openssl/crypto/bn/bn_kron.c b/crypto/openssl/crypto/bn/bn_kron.c
deleted file mode 100644
index 740359b7520d..000000000000
--- a/crypto/openssl/crypto/bn/bn_kron.c
+++ /dev/null
@@ -1,184 +0,0 @@
-/* crypto/bn/bn_kron.c */
-/* ====================================================================
- * Copyright (c) 1998-2000 The OpenSSL Project.  All rights reserved.
- *
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions
- * are met:
- *
- * 1. Redistributions of source code must retain the above copyright
- *    notice, this list of conditions and the following disclaimer. 
- *
- * 2. Redistributions in binary form must reproduce the above copyright
- *    notice, this list of conditions and the following disclaimer in
- *    the documentation and/or other materials provided with the
- *    distribution.
- *
- * 3. All advertising materials mentioning features or use of this
- *    software must display the following acknowledgment:
- *    "This product includes software developed by the OpenSSL Project
- *    for use in the OpenSSL Toolkit. (http://www.openssl.org/)"
- *
- * 4. The names "OpenSSL Toolkit" and "OpenSSL Project" must not be used to
- *    endorse or promote products derived from this software without
- *    prior written permission. For written permission, please contact
- *    openssl-core@openssl.org.
- *
- * 5. Products derived from this software may not be called "OpenSSL"
- *    nor may "OpenSSL" appear in their names without prior written
- *    permission of the OpenSSL Project.
- *
- * 6. Redistributions of any form whatsoever must retain the following
- *    acknowledgment:
- *    "This product includes software developed by the OpenSSL Project
- *    for use in the OpenSSL Toolkit (http://www.openssl.org/)"
- *
- * THIS SOFTWARE IS PROVIDED BY THE OpenSSL PROJECT ``AS IS'' AND ANY
- * EXPRESSED OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
- * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR
- * PURPOSE ARE DISCLAIMED.  IN NO EVENT SHALL THE OpenSSL PROJECT OR
- * ITS CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
- * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
- * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
- * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
- * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
- * STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
- * ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED
- * OF THE POSSIBILITY OF SUCH DAMAGE.
- * ====================================================================
- *
- * This product includes cryptographic software written by Eric Young
- * (eay@cryptsoft.com).  This product includes software written by Tim
- * Hudson (tjh@cryptsoft.com).
- *
- */
-
-#include "cryptlib.h"
-#include "bn_lcl.h"
-
-/* least significant word */
-#define BN_lsw(n) (((n)->top == 0) ? (BN_ULONG) 0 : (n)->d[0])
-
-/* Returns -2 for errors because both -1 and 0 are valid results. */
-int BN_kronecker(const BIGNUM *a, const BIGNUM *b, BN_CTX *ctx)
-	{
-	int i;
-	int ret = -2; /* avoid 'uninitialized' warning */
-	int err = 0;
-	BIGNUM *A, *B, *tmp;
-	/* In 'tab', only odd-indexed entries are relevant:
-	 * For any odd BIGNUM n,
-	 *     tab[BN_lsw(n) & 7]
-	 * is $(-1)^{(n^2-1)/8}$ (using TeX notation).
-	 * Note that the sign of n does not matter.
-	 */
-	static const int tab[8] = {0, 1, 0, -1, 0, -1, 0, 1};
-
-	bn_check_top(a);
-	bn_check_top(b);
-
-	BN_CTX_start(ctx);
-	A = BN_CTX_get(ctx);
-	B = BN_CTX_get(ctx);
-	if (B == NULL) goto end;
-	
-	err = !BN_copy(A, a);
-	if (err) goto end;
-	err = !BN_copy(B, b);
-	if (err) goto end;
-
-	/*
-	 * Kronecker symbol, imlemented according to Henri Cohen,
-	 * "A Course in Computational Algebraic Number Theory"
-	 * (algorithm 1.4.10).
-	 */
-
-	/* Cohen's step 1: */
-
-	if (BN_is_zero(B))
-		{
-		ret = BN_abs_is_word(A, 1);
-		goto end;
- 		}
-	
-	/* Cohen's step 2: */
-
-	if (!BN_is_odd(A) && !BN_is_odd(B))
-		{
-		ret = 0;
-		goto end;
-		}
-
-	/* now  B  is non-zero */
-	i = 0;
-	while (!BN_is_bit_set(B, i))
-		i++;
-	err = !BN_rshift(B, B, i);
-	if (err) goto end;
-	if (i & 1)
-		{
-		/* i is odd */
-		/* (thus  B  was even, thus  A  must be odd!)  */
-
-		/* set 'ret' to $(-1)^{(A^2-1)/8}$ */
-		ret = tab[BN_lsw(A) & 7];
-		}
-	else
-		{
-		/* i is even */
-		ret = 1;
-		}
-	
-	if (B->neg)
-		{
-		B->neg = 0;
-		if (A->neg)
-			ret = -ret;
-		}
-
-	/* now  B  is positive and odd, so what remains to be done is
-	 * to compute the Jacobi symbol  (A/B)  and multiply it by 'ret' */
-
-	while (1)
-		{
-		/* Cohen's step 3: */
-
-		/*  B  is positive and odd */
-
-		if (BN_is_zero(A))
-			{
-			ret = BN_is_one(B) ? ret : 0;
-			goto end;
-			}
-
-		/* now  A  is non-zero */
-		i = 0;
-		while (!BN_is_bit_set(A, i))
-			i++;
-		err = !BN_rshift(A, A, i);
-		if (err) goto end;
-		if (i & 1)
-			{
-			/* i is odd */
-			/* multiply 'ret' by  $(-1)^{(B^2-1)/8}$ */
-			ret = ret * tab[BN_lsw(B) & 7];
-			}
-	
-		/* Cohen's step 4: */
-		/* multiply 'ret' by  $(-1)^{(A-1)(B-1)/4}$ */
-		if ((A->neg ? ~BN_lsw(A) : BN_lsw(A)) & BN_lsw(B) & 2)
-			ret = -ret;
-		
-		/* (A, B) := (B mod |A|, |A|) */
-		err = !BN_nnmod(B, B, A, ctx);
-		if (err) goto end;
-		tmp = A; A = B; B = tmp;
-		tmp->neg = 0;
-		}
-end:
-	BN_CTX_end(ctx);
-	if (err)
-		return -2;
-	else
-		return ret;
-	}
diff --git a/crypto/openssl/crypto/bn/bn_lcl.h b/crypto/openssl/crypto/bn/bn_lcl.h
deleted file mode 100644
index ad4ca7ff305a..000000000000
--- a/crypto/openssl/crypto/bn/bn_lcl.h
+++ /dev/null
@@ -1,489 +0,0 @@
-/* crypto/bn/bn_lcl.h */
-/* Copyright (C) 1995-1998 Eric Young (eay@cryptsoft.com)
- * All rights reserved.
- *
- * This package is an SSL implementation written
- * by Eric Young (eay@cryptsoft.com).
- * The implementation was written so as to conform with Netscapes SSL.
- * 
- * This library is free for commercial and non-commercial use as long as
- * the following conditions are aheared to.  The following conditions
- * apply to all code found in this distribution, be it the RC4, RSA,
- * lhash, DES, etc., code; not just the SSL code.  The SSL documentation
- * included with this distribution is covered by the same copyright terms
- * except that the holder is Tim Hudson (tjh@cryptsoft.com).
- * 
- * Copyright remains Eric Young's, and as such any Copyright notices in
- * the code are not to be removed.
- * If this package is used in a product, Eric Young should be given attribution
- * as the author of the parts of the library used.
- * This can be in the form of a textual message at program startup or
- * in documentation (online or textual) provided with the package.
- * 
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions
- * are met:
- * 1. Redistributions of source code must retain the copyright
- *    notice, this list of conditions and the following disclaimer.
- * 2. Redistributions in binary form must reproduce the above copyright
- *    notice, this list of conditions and the following disclaimer in the
- *    documentation and/or other materials provided with the distribution.
- * 3. All advertising materials mentioning features or use of this software
- *    must display the following acknowledgement:
- *    "This product includes cryptographic software written by
- *     Eric Young (eay@cryptsoft.com)"
- *    The word 'cryptographic' can be left out if the rouines from the library
- *    being used are not cryptographic related :-).
- * 4. If you include any Windows specific code (or a derivative thereof) from 
- *    the apps directory (application code) you must include an acknowledgement:
- *    "This product includes software written by Tim Hudson (tjh@cryptsoft.com)"
- * 
- * THIS SOFTWARE IS PROVIDED BY ERIC YOUNG ``AS IS'' AND
- * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
- * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
- * ARE DISCLAIMED.  IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE
- * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
- * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
- * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
- * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
- * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
- * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
- * SUCH DAMAGE.
- * 
- * The licence and distribution terms for any publically available version or
- * derivative of this code cannot be changed.  i.e. this code cannot simply be
- * copied and put under another distribution licence
- * [including the GNU Public Licence.]
- */
-/* ====================================================================
- * Copyright (c) 1998-2000 The OpenSSL Project.  All rights reserved.
- *
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions
- * are met:
- *
- * 1. Redistributions of source code must retain the above copyright
- *    notice, this list of conditions and the following disclaimer. 
- *
- * 2. Redistributions in binary form must reproduce the above copyright
- *    notice, this list of conditions and the following disclaimer in
- *    the documentation and/or other materials provided with the
- *    distribution.
- *
- * 3. All advertising materials mentioning features or use of this
- *    software must display the following acknowledgment:
- *    "This product includes software developed by the OpenSSL Project
- *    for use in the OpenSSL Toolkit. (http://www.openssl.org/)"
- *
- * 4. The names "OpenSSL Toolkit" and "OpenSSL Project" must not be used to
- *    endorse or promote products derived from this software without
- *    prior written permission. For written permission, please contact
- *    openssl-core@openssl.org.
- *
- * 5. Products derived from this software may not be called "OpenSSL"
- *    nor may "OpenSSL" appear in their names without prior written
- *    permission of the OpenSSL Project.
- *
- * 6. Redistributions of any form whatsoever must retain the following
- *    acknowledgment:
- *    "This product includes software developed by the OpenSSL Project
- *    for use in the OpenSSL Toolkit (http://www.openssl.org/)"
- *
- * THIS SOFTWARE IS PROVIDED BY THE OpenSSL PROJECT ``AS IS'' AND ANY
- * EXPRESSED OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
- * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR
- * PURPOSE ARE DISCLAIMED.  IN NO EVENT SHALL THE OpenSSL PROJECT OR
- * ITS CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
- * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
- * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
- * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
- * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
- * STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
- * ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED
- * OF THE POSSIBILITY OF SUCH DAMAGE.
- * ====================================================================
- *
- * This product includes cryptographic software written by Eric Young
- * (eay@cryptsoft.com).  This product includes software written by Tim
- * Hudson (tjh@cryptsoft.com).
- *
- */
-
-#ifndef HEADER_BN_LCL_H
-#define HEADER_BN_LCL_H
-
-#include <openssl/bn.h>
-
-#ifdef  __cplusplus
-extern "C" {
-#endif
-
-
-/*
- * BN_window_bits_for_exponent_size -- macro for sliding window mod_exp functions
- *
- *
- * For window size 'w' (w >= 2) and a random 'b' bits exponent,
- * the number of multiplications is a constant plus on average
- *
- *    2^(w-1) + (b-w)/(w+1);
- *
- * here  2^(w-1)  is for precomputing the table (we actually need
- * entries only for windows that have the lowest bit set), and
- * (b-w)/(w+1)  is an approximation for the expected number of
- * w-bit windows, not counting the first one.
- *
- * Thus we should use
- *
- *    w >= 6  if        b > 671
- *     w = 5  if  671 > b > 239
- *     w = 4  if  239 > b >  79
- *     w = 3  if   79 > b >  23
- *    w <= 2  if   23 > b
- *
- * (with draws in between).  Very small exponents are often selected
- * with low Hamming weight, so we use  w = 1  for b <= 23.
- */
-#if 1
-#define BN_window_bits_for_exponent_size(b) \
-		((b) > 671 ? 6 : \
-		 (b) > 239 ? 5 : \
-		 (b) >  79 ? 4 : \
-		 (b) >  23 ? 3 : 1)
-#else
-/* Old SSLeay/OpenSSL table.
- * Maximum window size was 5, so this table differs for b==1024;
- * but it coincides for other interesting values (b==160, b==512).
- */
-#define BN_window_bits_for_exponent_size(b) \
-		((b) > 255 ? 5 : \
-		 (b) > 127 ? 4 : \
-		 (b) >  17 ? 3 : 1)
-#endif	 
-
-
-
-/* BN_mod_exp_mont_conttime is based on the assumption that the
- * L1 data cache line width of the target processor is at least
- * the following value.
- */
-#define MOD_EXP_CTIME_MIN_CACHE_LINE_WIDTH	( 64 )
-#define MOD_EXP_CTIME_MIN_CACHE_LINE_MASK	(MOD_EXP_CTIME_MIN_CACHE_LINE_WIDTH - 1)
-
-/* Window sizes optimized for fixed window size modular exponentiation
- * algorithm (BN_mod_exp_mont_consttime).
- *
- * To achieve the security goals of BN_mode_exp_mont_consttime, the
- * maximum size of the window must not exceed
- * log_2(MOD_EXP_CTIME_MIN_CACHE_LINE_WIDTH). 
- *
- * Window size thresholds are defined for cache line sizes of 32 and 64,
- * cache line sizes where log_2(32)=5 and log_2(64)=6 respectively. A
- * window size of 7 should only be used on processors that have a 128
- * byte or greater cache line size.
- */
-#if MOD_EXP_CTIME_MIN_CACHE_LINE_WIDTH == 64
-
-#  define BN_window_bits_for_ctime_exponent_size(b) \
-		((b) > 937 ? 6 : \
-		 (b) > 306 ? 5 : \
-		 (b) >  89 ? 4 : \
-		 (b) >  22 ? 3 : 1)
-#  define BN_MAX_WINDOW_BITS_FOR_CTIME_EXPONENT_SIZE	(6)
-
-#elif MOD_EXP_CTIME_MIN_CACHE_LINE_WIDTH == 32
-
-#  define BN_window_bits_for_ctime_exponent_size(b) \
-		((b) > 306 ? 5 : \
-		 (b) >  89 ? 4 : \
-		 (b) >  22 ? 3 : 1)
-#  define BN_MAX_WINDOW_BITS_FOR_CTIME_EXPONENT_SIZE	(5)
-
-#endif
-
-
-/* Pentium pro 16,16,16,32,64 */
-/* Alpha       16,16,16,16.64 */
-#define BN_MULL_SIZE_NORMAL			(16) /* 32 */
-#define BN_MUL_RECURSIVE_SIZE_NORMAL		(16) /* 32 less than */
-#define BN_SQR_RECURSIVE_SIZE_NORMAL		(16) /* 32 */
-#define BN_MUL_LOW_RECURSIVE_SIZE_NORMAL	(32) /* 32 */
-#define BN_MONT_CTX_SET_SIZE_WORD		(64) /* 32 */
-
-#if !defined(OPENSSL_NO_ASM) && !defined(OPENSSL_NO_INLINE_ASM) && !defined(PEDANTIC)
-/*
- * BN_UMULT_HIGH section.
- *
- * No, I'm not trying to overwhelm you when stating that the
- * product of N-bit numbers is 2*N bits wide:-) No, I don't expect
- * you to be impressed when I say that if the compiler doesn't
- * support 2*N integer type, then you have to replace every N*N
- * multiplication with 4 (N/2)*(N/2) accompanied by some shifts
- * and additions which unavoidably results in severe performance
- * penalties. Of course provided that the hardware is capable of
- * producing 2*N result... That's when you normally start
- * considering assembler implementation. However! It should be
- * pointed out that some CPUs (most notably Alpha, PowerPC and
- * upcoming IA-64 family:-) provide *separate* instruction
- * calculating the upper half of the product placing the result
- * into a general purpose register. Now *if* the compiler supports
- * inline assembler, then it's not impossible to implement the
- * "bignum" routines (and have the compiler optimize 'em)
- * exhibiting "native" performance in C. That's what BN_UMULT_HIGH
- * macro is about:-)
- *
- *					<appro@fy.chalmers.se>
- */
-# if defined(__alpha) && (defined(SIXTY_FOUR_BIT_LONG) || defined(SIXTY_FOUR_BIT))
-#  if defined(__DECC)
-#   include <c_asm.h>
-#   define BN_UMULT_HIGH(a,b)	(BN_ULONG)asm("umulh %a0,%a1,%v0",(a),(b))
-#  elif defined(__GNUC__)
-#   define BN_UMULT_HIGH(a,b)	({	\
-	register BN_ULONG ret;		\
-	asm ("umulh	%1,%2,%0"	\
-	     : "=r"(ret)		\
-	     : "r"(a), "r"(b));		\
-	ret;			})
-#  endif	/* compiler */
-# elif defined(_ARCH_PPC) && defined(__64BIT__) && defined(SIXTY_FOUR_BIT_LONG)
-#  if defined(__GNUC__)
-#   define BN_UMULT_HIGH(a,b)	({	\
-	register BN_ULONG ret;		\
-	asm ("mulhdu	%0,%1,%2"	\
-	     : "=r"(ret)		\
-	     : "r"(a), "r"(b));		\
-	ret;			})
-#  endif	/* compiler */
-# elif defined(__x86_64) && defined(SIXTY_FOUR_BIT_LONG)
-#  if defined(__GNUC__)
-#   define BN_UMULT_HIGH(a,b)	({	\
-	register BN_ULONG ret,discard;	\
-	asm ("mulq	%3"		\
-	     : "=a"(discard),"=d"(ret)	\
-	     : "a"(a), "g"(b)		\
-	     : "cc");			\
-	ret;			})
-#   define BN_UMULT_LOHI(low,high,a,b)	\
-	asm ("mulq	%3"		\
-		: "=a"(low),"=d"(high)	\
-		: "a"(a),"g"(b)		\
-		: "cc");
-#  endif
-# elif (defined(_M_AMD64) || defined(_M_X64)) && defined(SIXTY_FOUR_BIT)
-#  if defined(_MSC_VER) && _MSC_VER>=1400
-    unsigned __int64 __umulh	(unsigned __int64 a,unsigned __int64 b);
-    unsigned __int64 _umul128	(unsigned __int64 a,unsigned __int64 b,
-				 unsigned __int64 *h);
-#   pragma intrinsic(__umulh,_umul128)
-#   define BN_UMULT_HIGH(a,b)		__umulh((a),(b))
-#   define BN_UMULT_LOHI(low,high,a,b)	((low)=_umul128((a),(b),&(high)))
-#  endif
-# endif		/* cpu */
-#endif		/* OPENSSL_NO_ASM */
-
-/*************************************************************
- * Using the long long type
- */
-#define Lw(t)    (((BN_ULONG)(t))&BN_MASK2)
-#define Hw(t)    (((BN_ULONG)((t)>>BN_BITS2))&BN_MASK2)
-
-#ifdef BN_DEBUG_RAND
-#define bn_clear_top2max(a) \
-	{ \
-	int      ind = (a)->dmax - (a)->top; \
-	BN_ULONG *ftl = &(a)->d[(a)->top-1]; \
-	for (; ind != 0; ind--) \
-		*(++ftl) = 0x0; \
-	}
-#else
-#define bn_clear_top2max(a)
-#endif
-
-#ifdef BN_LLONG
-#define mul_add(r,a,w,c) { \
-	BN_ULLONG t; \
-	t=(BN_ULLONG)w * (a) + (r) + (c); \
-	(r)= Lw(t); \
-	(c)= Hw(t); \
-	}
-
-#define mul(r,a,w,c) { \
-	BN_ULLONG t; \
-	t=(BN_ULLONG)w * (a) + (c); \
-	(r)= Lw(t); \
-	(c)= Hw(t); \
-	}
-
-#define sqr(r0,r1,a) { \
-	BN_ULLONG t; \
-	t=(BN_ULLONG)(a)*(a); \
-	(r0)=Lw(t); \
-	(r1)=Hw(t); \
-	}
-
-#elif defined(BN_UMULT_LOHI)
-#define mul_add(r,a,w,c) {		\
-	BN_ULONG high,low,ret,tmp=(a);	\
-	ret =  (r);			\
-	BN_UMULT_LOHI(low,high,w,tmp);	\
-	ret += (c);			\
-	(c) =  (ret<(c))?1:0;		\
-	(c) += high;			\
-	ret += low;			\
-	(c) += (ret<low)?1:0;		\
-	(r) =  ret;			\
-	}
-
-#define mul(r,a,w,c)	{		\
-	BN_ULONG high,low,ret,ta=(a);	\
-	BN_UMULT_LOHI(low,high,w,ta);	\
-	ret =  low + (c);		\
-	(c) =  high;			\
-	(c) += (ret<low)?1:0;		\
-	(r) =  ret;			\
-	}
-
-#define sqr(r0,r1,a)	{		\
-	BN_ULONG tmp=(a);		\
-	BN_UMULT_LOHI(r0,r1,tmp,tmp);	\
-	}
-
-#elif defined(BN_UMULT_HIGH)
-#define mul_add(r,a,w,c) {		\
-	BN_ULONG high,low,ret,tmp=(a);	\
-	ret =  (r);			\
-	high=  BN_UMULT_HIGH(w,tmp);	\
-	ret += (c);			\
-	low =  (w) * tmp;		\
-	(c) =  (ret<(c))?1:0;		\
-	(c) += high;			\
-	ret += low;			\
-	(c) += (ret<low)?1:0;		\
-	(r) =  ret;			\
-	}
-
-#define mul(r,a,w,c)	{		\
-	BN_ULONG high,low,ret,ta=(a);	\
-	low =  (w) * ta;		\
-	high=  BN_UMULT_HIGH(w,ta);	\
-	ret =  low + (c);		\
-	(c) =  high;			\
-	(c) += (ret<low)?1:0;		\
-	(r) =  ret;			\
-	}
-
-#define sqr(r0,r1,a)	{		\
-	BN_ULONG tmp=(a);		\
-	(r0) = tmp * tmp;		\
-	(r1) = BN_UMULT_HIGH(tmp,tmp);	\
-	}
-
-#else
-/*************************************************************
- * No long long type
- */
-
-#define LBITS(a)	((a)&BN_MASK2l)
-#define HBITS(a)	(((a)>>BN_BITS4)&BN_MASK2l)
-#define	L2HBITS(a)	(((a)<<BN_BITS4)&BN_MASK2)
-
-#define LLBITS(a)	((a)&BN_MASKl)
-#define LHBITS(a)	(((a)>>BN_BITS2)&BN_MASKl)
-#define	LL2HBITS(a)	((BN_ULLONG)((a)&BN_MASKl)<<BN_BITS2)
-
-#define mul64(l,h,bl,bh) \
-	{ \
-	BN_ULONG m,m1,lt,ht; \
- \
-	lt=l; \
-	ht=h; \
-	m =(bh)*(lt); \
-	lt=(bl)*(lt); \
-	m1=(bl)*(ht); \
-	ht =(bh)*(ht); \
-	m=(m+m1)&BN_MASK2; if (m < m1) ht+=L2HBITS((BN_ULONG)1); \
-	ht+=HBITS(m); \
-	m1=L2HBITS(m); \
-	lt=(lt+m1)&BN_MASK2; if (lt < m1) ht++; \
-	(l)=lt; \
-	(h)=ht; \
-	}
-
-#define sqr64(lo,ho,in) \
-	{ \
-	BN_ULONG l,h,m; \
- \
-	h=(in); \
-	l=LBITS(h); \
-	h=HBITS(h); \
-	m =(l)*(h); \
-	l*=l; \
-	h*=h; \
-	h+=(m&BN_MASK2h1)>>(BN_BITS4-1); \
-	m =(m&BN_MASK2l)<<(BN_BITS4+1); \
-	l=(l+m)&BN_MASK2; if (l < m) h++; \
-	(lo)=l; \
-	(ho)=h; \
-	}
-
-#define mul_add(r,a,bl,bh,c) { \
-	BN_ULONG l,h; \
- \
-	h= (a); \
-	l=LBITS(h); \
-	h=HBITS(h); \
-	mul64(l,h,(bl),(bh)); \
- \
-	/* non-multiply part */ \
-	l=(l+(c))&BN_MASK2; if (l < (c)) h++; \
-	(c)=(r); \
-	l=(l+(c))&BN_MASK2; if (l < (c)) h++; \
-	(c)=h&BN_MASK2; \
-	(r)=l; \
-	}
-
-#define mul(r,a,bl,bh,c) { \
-	BN_ULONG l,h; \
- \
-	h= (a); \
-	l=LBITS(h); \
-	h=HBITS(h); \
-	mul64(l,h,(bl),(bh)); \
- \
-	/* non-multiply part */ \
-	l+=(c); if ((l&BN_MASK2) < (c)) h++; \
-	(c)=h&BN_MASK2; \
-	(r)=l&BN_MASK2; \
-	}
-#endif /* !BN_LLONG */
-
-void bn_mul_normal(BN_ULONG *r,BN_ULONG *a,int na,BN_ULONG *b,int nb);
-void bn_mul_comba8(BN_ULONG *r,BN_ULONG *a,BN_ULONG *b);
-void bn_mul_comba4(BN_ULONG *r,BN_ULONG *a,BN_ULONG *b);
-void bn_sqr_normal(BN_ULONG *r, const BN_ULONG *a, int n, BN_ULONG *tmp);
-void bn_sqr_comba8(BN_ULONG *r,const BN_ULONG *a);
-void bn_sqr_comba4(BN_ULONG *r,const BN_ULONG *a);
-int bn_cmp_words(const BN_ULONG *a,const BN_ULONG *b,int n);
-int bn_cmp_part_words(const BN_ULONG *a, const BN_ULONG *b,
-	int cl, int dl);
-void bn_mul_recursive(BN_ULONG *r,BN_ULONG *a,BN_ULONG *b,int n2,
-	int dna,int dnb,BN_ULONG *t);
-void bn_mul_part_recursive(BN_ULONG *r,BN_ULONG *a,BN_ULONG *b,
-	int n,int tna,int tnb,BN_ULONG *t);
-void bn_sqr_recursive(BN_ULONG *r,const BN_ULONG *a, int n2, BN_ULONG *t);
-void bn_mul_low_normal(BN_ULONG *r,BN_ULONG *a,BN_ULONG *b, int n);
-void bn_mul_low_recursive(BN_ULONG *r,BN_ULONG *a,BN_ULONG *b,int n2,
-	BN_ULONG *t);
-void bn_mul_high(BN_ULONG *r,BN_ULONG *a,BN_ULONG *b,BN_ULONG *l,int n2,
-	BN_ULONG *t);
-BN_ULONG bn_add_part_words(BN_ULONG *r, const BN_ULONG *a, const BN_ULONG *b,
-	int cl, int dl);
-BN_ULONG bn_sub_part_words(BN_ULONG *r, const BN_ULONG *a, const BN_ULONG *b,
-	int cl, int dl);
-
-#ifdef  __cplusplus
-}
-#endif
-
-#endif
diff --git a/crypto/openssl/crypto/bn/bn_lib.c b/crypto/openssl/crypto/bn/bn_lib.c
deleted file mode 100644
index 210ccb42bba1..000000000000
--- a/crypto/openssl/crypto/bn/bn_lib.c
+++ /dev/null
@@ -1,845 +0,0 @@
-/* crypto/bn/bn_lib.c */
-/* Copyright (C) 1995-1998 Eric Young (eay@cryptsoft.com)
- * All rights reserved.
- *
- * This package is an SSL implementation written
- * by Eric Young (eay@cryptsoft.com).
- * The implementation was written so as to conform with Netscapes SSL.
- * 
- * This library is free for commercial and non-commercial use as long as
- * the following conditions are aheared to.  The following conditions
- * apply to all code found in this distribution, be it the RC4, RSA,
- * lhash, DES, etc., code; not just the SSL code.  The SSL documentation
- * included with this distribution is covered by the same copyright terms
- * except that the holder is Tim Hudson (tjh@cryptsoft.com).
- * 
- * Copyright remains Eric Young's, and as such any Copyright notices in
- * the code are not to be removed.
- * If this package is used in a product, Eric Young should be given attribution
- * as the author of the parts of the library used.
- * This can be in the form of a textual message at program startup or
- * in documentation (online or textual) provided with the package.
- * 
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions
- * are met:
- * 1. Redistributions of source code must retain the copyright
- *    notice, this list of conditions and the following disclaimer.
- * 2. Redistributions in binary form must reproduce the above copyright
- *    notice, this list of conditions and the following disclaimer in the
- *    documentation and/or other materials provided with the distribution.
- * 3. All advertising materials mentioning features or use of this software
- *    must display the following acknowledgement:
- *    "This product includes cryptographic software written by
- *     Eric Young (eay@cryptsoft.com)"
- *    The word 'cryptographic' can be left out if the rouines from the library
- *    being used are not cryptographic related :-).
- * 4. If you include any Windows specific code (or a derivative thereof) from 
- *    the apps directory (application code) you must include an acknowledgement:
- *    "This product includes software written by Tim Hudson (tjh@cryptsoft.com)"
- * 
- * THIS SOFTWARE IS PROVIDED BY ERIC YOUNG ``AS IS'' AND
- * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
- * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
- * ARE DISCLAIMED.  IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE
- * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
- * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
- * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
- * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
- * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
- * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
- * SUCH DAMAGE.
- * 
- * The licence and distribution terms for any publically available version or
- * derivative of this code cannot be changed.  i.e. this code cannot simply be
- * copied and put under another distribution licence
- * [including the GNU Public Licence.]
- */
-
-#ifndef BN_DEBUG
-# undef NDEBUG /* avoid conflicting definitions */
-# define NDEBUG
-#endif
-
-#include <assert.h>
-#include <limits.h>
-#include <stdio.h>
-#include "cryptlib.h"
-#include "bn_lcl.h"
-
-const char BN_version[]="Big Number" OPENSSL_VERSION_PTEXT;
-
-/* This stuff appears to be completely unused, so is deprecated */
-#ifndef OPENSSL_NO_DEPRECATED
-/* For a 32 bit machine
- * 2 -   4 ==  128
- * 3 -   8 ==  256
- * 4 -  16 ==  512
- * 5 -  32 == 1024
- * 6 -  64 == 2048
- * 7 - 128 == 4096
- * 8 - 256 == 8192
- */
-static int bn_limit_bits=0;
-static int bn_limit_num=8;        /* (1<<bn_limit_bits) */
-static int bn_limit_bits_low=0;
-static int bn_limit_num_low=8;    /* (1<<bn_limit_bits_low) */
-static int bn_limit_bits_high=0;
-static int bn_limit_num_high=8;   /* (1<<bn_limit_bits_high) */
-static int bn_limit_bits_mont=0;
-static int bn_limit_num_mont=8;   /* (1<<bn_limit_bits_mont) */
-
-void BN_set_params(int mult, int high, int low, int mont)
-	{
-	if (mult >= 0)
-		{
-		if (mult > (int)(sizeof(int)*8)-1)
-			mult=sizeof(int)*8-1;
-		bn_limit_bits=mult;
-		bn_limit_num=1<<mult;
-		}
-	if (high >= 0)
-		{
-		if (high > (int)(sizeof(int)*8)-1)
-			high=sizeof(int)*8-1;
-		bn_limit_bits_high=high;
-		bn_limit_num_high=1<<high;
-		}
-	if (low >= 0)
-		{
-		if (low > (int)(sizeof(int)*8)-1)
-			low=sizeof(int)*8-1;
-		bn_limit_bits_low=low;
-		bn_limit_num_low=1<<low;
-		}
-	if (mont >= 0)
-		{
-		if (mont > (int)(sizeof(int)*8)-1)
-			mont=sizeof(int)*8-1;
-		bn_limit_bits_mont=mont;
-		bn_limit_num_mont=1<<mont;
-		}
-	}
-
-int BN_get_params(int which)
-	{
-	if      (which == 0) return(bn_limit_bits);
-	else if (which == 1) return(bn_limit_bits_high);
-	else if (which == 2) return(bn_limit_bits_low);
-	else if (which == 3) return(bn_limit_bits_mont);
-	else return(0);
-	}
-#endif
-
-const BIGNUM *BN_value_one(void)
-	{
-	static BN_ULONG data_one=1L;
-	static BIGNUM const_one={&data_one,1,1,0,BN_FLG_STATIC_DATA};
-
-	return(&const_one);
-	}
-
-char *BN_options(void)
-	{
-	static int init=0;
-	static char data[16];
-
-	if (!init)
-		{
-		init++;
-#ifdef BN_LLONG
-		BIO_snprintf(data,sizeof data,"bn(%d,%d)",
-			     (int)sizeof(BN_ULLONG)*8,(int)sizeof(BN_ULONG)*8);
-#else
-		BIO_snprintf(data,sizeof data,"bn(%d,%d)",
-			     (int)sizeof(BN_ULONG)*8,(int)sizeof(BN_ULONG)*8);
-#endif
-		}
-	return(data);
-	}
-
-int BN_num_bits_word(BN_ULONG l)
-	{
-	static const char bits[256]={
-		0,1,2,2,3,3,3,3,4,4,4,4,4,4,4,4,
-		5,5,5,5,5,5,5,5,5,5,5,5,5,5,5,5,
-		6,6,6,6,6,6,6,6,6,6,6,6,6,6,6,6,
-		6,6,6,6,6,6,6,6,6,6,6,6,6,6,6,6,
-		7,7,7,7,7,7,7,7,7,7,7,7,7,7,7,7,
-		7,7,7,7,7,7,7,7,7,7,7,7,7,7,7,7,
-		7,7,7,7,7,7,7,7,7,7,7,7,7,7,7,7,
-		7,7,7,7,7,7,7,7,7,7,7,7,7,7,7,7,
-		8,8,8,8,8,8,8,8,8,8,8,8,8,8,8,8,
-		8,8,8,8,8,8,8,8,8,8,8,8,8,8,8,8,
-		8,8,8,8,8,8,8,8,8,8,8,8,8,8,8,8,
-		8,8,8,8,8,8,8,8,8,8,8,8,8,8,8,8,
-		8,8,8,8,8,8,8,8,8,8,8,8,8,8,8,8,
-		8,8,8,8,8,8,8,8,8,8,8,8,8,8,8,8,
-		8,8,8,8,8,8,8,8,8,8,8,8,8,8,8,8,
-		8,8,8,8,8,8,8,8,8,8,8,8,8,8,8,8,
-		};
-
-#if defined(SIXTY_FOUR_BIT_LONG)
-	if (l & 0xffffffff00000000L)
-		{
-		if (l & 0xffff000000000000L)
-			{
-			if (l & 0xff00000000000000L)
-				{
-				return(bits[(int)(l>>56)]+56);
-				}
-			else	return(bits[(int)(l>>48)]+48);
-			}
-		else
-			{
-			if (l & 0x0000ff0000000000L)
-				{
-				return(bits[(int)(l>>40)]+40);
-				}
-			else	return(bits[(int)(l>>32)]+32);
-			}
-		}
-	else
-#else
-#ifdef SIXTY_FOUR_BIT
-	if (l & 0xffffffff00000000LL)
-		{
-		if (l & 0xffff000000000000LL)
-			{
-			if (l & 0xff00000000000000LL)
-				{
-				return(bits[(int)(l>>56)]+56);
-				}
-			else	return(bits[(int)(l>>48)]+48);
-			}
-		else
-			{
-			if (l & 0x0000ff0000000000LL)
-				{
-				return(bits[(int)(l>>40)]+40);
-				}
-			else	return(bits[(int)(l>>32)]+32);
-			}
-		}
-	else
-#endif
-#endif
-		{
-#if defined(THIRTY_TWO_BIT) || defined(SIXTY_FOUR_BIT) || defined(SIXTY_FOUR_BIT_LONG)
-		if (l & 0xffff0000L)
-			{
-			if (l & 0xff000000L)
-				return(bits[(int)(l>>24L)]+24);
-			else	return(bits[(int)(l>>16L)]+16);
-			}
-		else
-#endif
-			{
-#if defined(SIXTEEN_BIT) || defined(THIRTY_TWO_BIT) || defined(SIXTY_FOUR_BIT) || defined(SIXTY_FOUR_BIT_LONG)
-			if (l & 0xff00L)
-				return(bits[(int)(l>>8)]+8);
-			else	
-#endif
-				return(bits[(int)(l   )]  );
-			}
-		}
-	}
-
-int BN_num_bits(const BIGNUM *a)
-	{
-	int i = a->top - 1;
-	bn_check_top(a);
-
-	if (BN_is_zero(a)) return 0;
-	return ((i*BN_BITS2) + BN_num_bits_word(a->d[i]));
-	}
-
-void BN_clear_free(BIGNUM *a)
-	{
-	int i;
-
-	if (a == NULL) return;
-	bn_check_top(a);
-	if (a->d != NULL)
-		{
-		OPENSSL_cleanse(a->d,a->dmax*sizeof(a->d[0]));
-		if (!(BN_get_flags(a,BN_FLG_STATIC_DATA)))
-			OPENSSL_free(a->d);
-		}
-	i=BN_get_flags(a,BN_FLG_MALLOCED);
-	OPENSSL_cleanse(a,sizeof(BIGNUM));
-	if (i)
-		OPENSSL_free(a);
-	}
-
-void BN_free(BIGNUM *a)
-	{
-	if (a == NULL) return;
-	bn_check_top(a);
-	if ((a->d != NULL) && !(BN_get_flags(a,BN_FLG_STATIC_DATA)))
-		OPENSSL_free(a->d);
-	if (a->flags & BN_FLG_MALLOCED)
-		OPENSSL_free(a);
-	else
-		{
-#ifndef OPENSSL_NO_DEPRECATED
-		a->flags|=BN_FLG_FREE;
-#endif
-		a->d = NULL;
-		}
-	}
-
-void BN_init(BIGNUM *a)
-	{
-	memset(a,0,sizeof(BIGNUM));
-	bn_check_top(a);
-	}
-
-BIGNUM *BN_new(void)
-	{
-	BIGNUM *ret;
-
-	if ((ret=(BIGNUM *)OPENSSL_malloc(sizeof(BIGNUM))) == NULL)
-		{
-		BNerr(BN_F_BN_NEW,ERR_R_MALLOC_FAILURE);
-		return(NULL);
-		}
-	ret->flags=BN_FLG_MALLOCED;
-	ret->top=0;
-	ret->neg=0;
-	ret->dmax=0;
-	ret->d=NULL;
-	bn_check_top(ret);
-	return(ret);
-	}
-
-/* This is used both by bn_expand2() and bn_dup_expand() */
-/* The caller MUST check that words > b->dmax before calling this */
-static BN_ULONG *bn_expand_internal(const BIGNUM *b, int words)
-	{
-	BN_ULONG *A,*a = NULL;
-	const BN_ULONG *B;
-	int i;
-
-	bn_check_top(b);
-
-	if (words > (INT_MAX/(4*BN_BITS2)))
-		{
-		BNerr(BN_F_BN_EXPAND_INTERNAL,BN_R_BIGNUM_TOO_LONG);
-		return NULL;
-		}
-	if (BN_get_flags(b,BN_FLG_STATIC_DATA))
-		{
-		BNerr(BN_F_BN_EXPAND_INTERNAL,BN_R_EXPAND_ON_STATIC_BIGNUM_DATA);
-		return(NULL);
-		}
-	a=A=(BN_ULONG *)OPENSSL_malloc(sizeof(BN_ULONG)*words);
-	if (A == NULL)
-		{
-		BNerr(BN_F_BN_EXPAND_INTERNAL,ERR_R_MALLOC_FAILURE);
-		return(NULL);
-		}
-#if 1
-	B=b->d;
-	/* Check if the previous number needs to be copied */
-	if (B != NULL)
-		{
-		for (i=b->top>>2; i>0; i--,A+=4,B+=4)
-			{
-			/*
-			 * The fact that the loop is unrolled
-			 * 4-wise is a tribute to Intel. It's
-			 * the one that doesn't have enough
-			 * registers to accomodate more data.
-			 * I'd unroll it 8-wise otherwise:-)
-			 *
-			 *		<appro@fy.chalmers.se>
-			 */
-			BN_ULONG a0,a1,a2,a3;
-			a0=B[0]; a1=B[1]; a2=B[2]; a3=B[3];
-			A[0]=a0; A[1]=a1; A[2]=a2; A[3]=a3;
-			}
-		switch (b->top&3)
-			{
-		case 3:	A[2]=B[2];
-		case 2:	A[1]=B[1];
-		case 1:	A[0]=B[0];
-		case 0: /* workaround for ultrix cc: without 'case 0', the optimizer does
-		         * the switch table by doing a=top&3; a--; goto jump_table[a];
-		         * which fails for top== 0 */
-			;
-			}
-		}
-
-#else
-	memset(A,0,sizeof(BN_ULONG)*words);
-	memcpy(A,b->d,sizeof(b->d[0])*b->top);
-#endif
-		
-	return(a);
-	}
-
-/* This is an internal function that can be used instead of bn_expand2()
- * when there is a need to copy BIGNUMs instead of only expanding the
- * data part, while still expanding them.
- * Especially useful when needing to expand BIGNUMs that are declared
- * 'const' and should therefore not be changed.
- * The reason to use this instead of a BN_dup() followed by a bn_expand2()
- * is memory allocation overhead.  A BN_dup() followed by a bn_expand2()
- * will allocate new memory for the BIGNUM data twice, and free it once,
- * while bn_dup_expand() makes sure allocation is made only once.
- */
-
-#ifndef OPENSSL_NO_DEPRECATED
-BIGNUM *bn_dup_expand(const BIGNUM *b, int words)
-	{
-	BIGNUM *r = NULL;
-
-	bn_check_top(b);
-
-	/* This function does not work if
-	 *      words <= b->dmax && top < words
-	 * because BN_dup() does not preserve 'dmax'!
-	 * (But bn_dup_expand() is not used anywhere yet.)
-	 */
-
-	if (words > b->dmax)
-		{
-		BN_ULONG *a = bn_expand_internal(b, words);
-
-		if (a)
-			{
-			r = BN_new();
-			if (r)
-				{
-				r->top = b->top;
-				r->dmax = words;
-				r->neg = b->neg;
-				r->d = a;
-				}
-			else
-				{
-				/* r == NULL, BN_new failure */
-				OPENSSL_free(a);
-				}
-			}
-		/* If a == NULL, there was an error in allocation in
-		   bn_expand_internal(), and NULL should be returned */
-		}
-	else
-		{
-		r = BN_dup(b);
-		}
-
-	bn_check_top(r);
-	return r;
-	}
-#endif
-
-/* This is an internal function that should not be used in applications.
- * It ensures that 'b' has enough room for a 'words' word number
- * and initialises any unused part of b->d with leading zeros.
- * It is mostly used by the various BIGNUM routines. If there is an error,
- * NULL is returned. If not, 'b' is returned. */
-
-BIGNUM *bn_expand2(BIGNUM *b, int words)
-	{
-	bn_check_top(b);
-
-	if (words > b->dmax)
-		{
-		BN_ULONG *a = bn_expand_internal(b, words);
-		if(!a) return NULL;
-		if(b->d) OPENSSL_free(b->d);
-		b->d=a;
-		b->dmax=words;
-		}
-
-/* None of this should be necessary because of what b->top means! */
-#if 0
-	/* NB: bn_wexpand() calls this only if the BIGNUM really has to grow */
-	if (b->top < b->dmax)
-		{
-		int i;
-		BN_ULONG *A = &(b->d[b->top]);
-		for (i=(b->dmax - b->top)>>3; i>0; i--,A+=8)
-			{
-			A[0]=0; A[1]=0; A[2]=0; A[3]=0;
-			A[4]=0; A[5]=0; A[6]=0; A[7]=0;
-			}
-		for (i=(b->dmax - b->top)&7; i>0; i--,A++)
-			A[0]=0;
-		assert(A == &(b->d[b->dmax]));
-		}
-#endif
-	bn_check_top(b);
-	return b;
-	}
-
-BIGNUM *BN_dup(const BIGNUM *a)
-	{
-	BIGNUM *t;
-
-	if (a == NULL) return NULL;
-	bn_check_top(a);
-
-	t = BN_new();
-	if (t == NULL) return NULL;
-	if(!BN_copy(t, a))
-		{
-		BN_free(t);
-		return NULL;
-		}
-	bn_check_top(t);
-	return t;
-	}
-
-BIGNUM *BN_copy(BIGNUM *a, const BIGNUM *b)
-	{
-	int i;
-	BN_ULONG *A;
-	const BN_ULONG *B;
-
-	bn_check_top(b);
-
-	if (a == b) return(a);
-	if (bn_wexpand(a,b->top) == NULL) return(NULL);
-
-#if 1
-	A=a->d;
-	B=b->d;
-	for (i=b->top>>2; i>0; i--,A+=4,B+=4)
-		{
-		BN_ULONG a0,a1,a2,a3;
-		a0=B[0]; a1=B[1]; a2=B[2]; a3=B[3];
-		A[0]=a0; A[1]=a1; A[2]=a2; A[3]=a3;
-		}
-	switch (b->top&3)
-		{
-		case 3: A[2]=B[2];
-		case 2: A[1]=B[1];
-		case 1: A[0]=B[0];
-		case 0: ; /* ultrix cc workaround, see comments in bn_expand_internal */
-		}
-#else
-	memcpy(a->d,b->d,sizeof(b->d[0])*b->top);
-#endif
-
-	a->top=b->top;
-	a->neg=b->neg;
-	bn_check_top(a);
-	return(a);
-	}
-
-void BN_swap(BIGNUM *a, BIGNUM *b)
-	{
-	int flags_old_a, flags_old_b;
-	BN_ULONG *tmp_d;
-	int tmp_top, tmp_dmax, tmp_neg;
-	
-	bn_check_top(a);
-	bn_check_top(b);
-
-	flags_old_a = a->flags;
-	flags_old_b = b->flags;
-
-	tmp_d = a->d;
-	tmp_top = a->top;
-	tmp_dmax = a->dmax;
-	tmp_neg = a->neg;
-	
-	a->d = b->d;
-	a->top = b->top;
-	a->dmax = b->dmax;
-	a->neg = b->neg;
-	
-	b->d = tmp_d;
-	b->top = tmp_top;
-	b->dmax = tmp_dmax;
-	b->neg = tmp_neg;
-	
-	a->flags = (flags_old_a & BN_FLG_MALLOCED) | (flags_old_b & BN_FLG_STATIC_DATA);
-	b->flags = (flags_old_b & BN_FLG_MALLOCED) | (flags_old_a & BN_FLG_STATIC_DATA);
-	bn_check_top(a);
-	bn_check_top(b);
-	}
-
-void BN_clear(BIGNUM *a)
-	{
-	bn_check_top(a);
-	if (a->d != NULL)
-		memset(a->d,0,a->dmax*sizeof(a->d[0]));
-	a->top=0;
-	a->neg=0;
-	}
-
-BN_ULONG BN_get_word(const BIGNUM *a)
-	{
-	if (a->top > 1)
-		return BN_MASK2;
-	else if (a->top == 1)
-		return a->d[0];
-	/* a->top == 0 */
-	return 0;
-	}
-
-int BN_set_word(BIGNUM *a, BN_ULONG w)
-	{
-	bn_check_top(a);
-	if (bn_expand(a,(int)sizeof(BN_ULONG)*8) == NULL) return(0);
-	a->neg = 0;
-	a->d[0] = w;
-	a->top = (w ? 1 : 0);
-	bn_check_top(a);
-	return(1);
-	}
-
-BIGNUM *BN_bin2bn(const unsigned char *s, int len, BIGNUM *ret)
-	{
-	unsigned int i,m;
-	unsigned int n;
-	BN_ULONG l;
-	BIGNUM  *bn = NULL;
-
-	if (ret == NULL)
-		ret = bn = BN_new();
-	if (ret == NULL) return(NULL);
-	bn_check_top(ret);
-	l=0;
-	n=len;
-	if (n == 0)
-		{
-		ret->top=0;
-		return(ret);
-		}
-	i=((n-1)/BN_BYTES)+1;
-	m=((n-1)%(BN_BYTES));
-	if (bn_wexpand(ret, (int)i) == NULL)
-		{
-		if (bn) BN_free(bn);
-		return NULL;
-		}
-	ret->top=i;
-	ret->neg=0;
-	while (n--)
-		{
-		l=(l<<8L)| *(s++);
-		if (m-- == 0)
-			{
-			ret->d[--i]=l;
-			l=0;
-			m=BN_BYTES-1;
-			}
-		}
-	/* need to call this due to clear byte at top if avoiding
-	 * having the top bit set (-ve number) */
-	bn_correct_top(ret);
-	return(ret);
-	}
-
-/* ignore negative */
-int BN_bn2bin(const BIGNUM *a, unsigned char *to)
-	{
-	int n,i;
-	BN_ULONG l;
-
-	bn_check_top(a);
-	n=i=BN_num_bytes(a);
-	while (i--)
-		{
-		l=a->d[i/BN_BYTES];
-		*(to++)=(unsigned char)(l>>(8*(i%BN_BYTES)))&0xff;
-		}
-	return(n);
-	}
-
-int BN_ucmp(const BIGNUM *a, const BIGNUM *b)
-	{
-	int i;
-	BN_ULONG t1,t2,*ap,*bp;
-
-	bn_check_top(a);
-	bn_check_top(b);
-
-	i=a->top-b->top;
-	if (i != 0) return(i);
-	ap=a->d;
-	bp=b->d;
-	for (i=a->top-1; i>=0; i--)
-		{
-		t1= ap[i];
-		t2= bp[i];
-		if (t1 != t2)
-			return((t1 > t2) ? 1 : -1);
-		}
-	return(0);
-	}
-
-int BN_cmp(const BIGNUM *a, const BIGNUM *b)
-	{
-	int i;
-	int gt,lt;
-	BN_ULONG t1,t2;
-
-	if ((a == NULL) || (b == NULL))
-		{
-		if (a != NULL)
-			return(-1);
-		else if (b != NULL)
-			return(1);
-		else
-			return(0);
-		}
-
-	bn_check_top(a);
-	bn_check_top(b);
-
-	if (a->neg != b->neg)
-		{
-		if (a->neg)
-			return(-1);
-		else	return(1);
-		}
-	if (a->neg == 0)
-		{ gt=1; lt= -1; }
-	else	{ gt= -1; lt=1; }
-
-	if (a->top > b->top) return(gt);
-	if (a->top < b->top) return(lt);
-	for (i=a->top-1; i>=0; i--)
-		{
-		t1=a->d[i];
-		t2=b->d[i];
-		if (t1 > t2) return(gt);
-		if (t1 < t2) return(lt);
-		}
-	return(0);
-	}
-
-int BN_set_bit(BIGNUM *a, int n)
-	{
-	int i,j,k;
-
-	if (n < 0)
-		return 0;
-
-	i=n/BN_BITS2;
-	j=n%BN_BITS2;
-	if (a->top <= i)
-		{
-		if (bn_wexpand(a,i+1) == NULL) return(0);
-		for(k=a->top; k<i+1; k++)
-			a->d[k]=0;
-		a->top=i+1;
-		}
-
-	a->d[i]|=(((BN_ULONG)1)<<j);
-	bn_check_top(a);
-	return(1);
-	}
-
-int BN_clear_bit(BIGNUM *a, int n)
-	{
-	int i,j;
-
-	bn_check_top(a);
-	if (n < 0) return 0;
-
-	i=n/BN_BITS2;
-	j=n%BN_BITS2;
-	if (a->top <= i) return(0);
-
-	a->d[i]&=(~(((BN_ULONG)1)<<j));
-	bn_correct_top(a);
-	return(1);
-	}
-
-int BN_is_bit_set(const BIGNUM *a, int n)
-	{
-	int i,j;
-
-	bn_check_top(a);
-	if (n < 0) return 0;
-	i=n/BN_BITS2;
-	j=n%BN_BITS2;
-	if (a->top <= i) return 0;
-	return((a->d[i]&(((BN_ULONG)1)<<j))?1:0);
-	}
-
-int BN_mask_bits(BIGNUM *a, int n)
-	{
-	int b,w;
-
-	bn_check_top(a);
-	if (n < 0) return 0;
-
-	w=n/BN_BITS2;
-	b=n%BN_BITS2;
-	if (w >= a->top) return 0;
-	if (b == 0)
-		a->top=w;
-	else
-		{
-		a->top=w+1;
-		a->d[w]&= ~(BN_MASK2<<b);
-		}
-	bn_correct_top(a);
-	return(1);
-	}
-
-void BN_set_negative(BIGNUM *a, int b)
-	{
-	if (b && !BN_is_zero(a))
-		a->neg = 1;
-	else
-		a->neg = 0;
-	}
-
-int bn_cmp_words(const BN_ULONG *a, const BN_ULONG *b, int n)
-	{
-	int i;
-	BN_ULONG aa,bb;
-
-	aa=a[n-1];
-	bb=b[n-1];
-	if (aa != bb) return((aa > bb)?1:-1);
-	for (i=n-2; i>=0; i--)
-		{
-		aa=a[i];
-		bb=b[i];
-		if (aa != bb) return((aa > bb)?1:-1);
-		}
-	return(0);
-	}
-
-/* Here follows a specialised variants of bn_cmp_words().  It has the
-   property of performing the operation on arrays of different sizes.
-   The sizes of those arrays is expressed through cl, which is the
-   common length ( basicall, min(len(a),len(b)) ), and dl, which is the
-   delta between the two lengths, calculated as len(a)-len(b).
-   All lengths are the number of BN_ULONGs...  */
-
-int bn_cmp_part_words(const BN_ULONG *a, const BN_ULONG *b,
-	int cl, int dl)
-	{
-	int n,i;
-	n = cl-1;
-
-	if (dl < 0)
-		{
-		for (i=dl; i<0; i++)
-			{
-			if (b[n-i] != 0)
-				return -1; /* a < b */
-			}
-		}
-	if (dl > 0)
-		{
-		for (i=dl; i>0; i--)
-			{
-			if (a[n+i] != 0)
-				return 1; /* a > b */
-			}
-		}
-	return bn_cmp_words(a,b,cl);
-	}
diff --git a/crypto/openssl/crypto/bn/bn_mod.c b/crypto/openssl/crypto/bn/bn_mod.c
deleted file mode 100644
index 77d6ddb91a5f..000000000000
--- a/crypto/openssl/crypto/bn/bn_mod.c
+++ /dev/null
@@ -1,301 +0,0 @@
-/* crypto/bn/bn_mod.c */
-/* Includes code written by Lenka Fibikova <fibikova@exp-math.uni-essen.de>
- * for the OpenSSL project. */
-/* ====================================================================
- * Copyright (c) 1998-2000 The OpenSSL Project.  All rights reserved.
- *
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions
- * are met:
- *
- * 1. Redistributions of source code must retain the above copyright
- *    notice, this list of conditions and the following disclaimer. 
- *
- * 2. Redistributions in binary form must reproduce the above copyright
- *    notice, this list of conditions and the following disclaimer in
- *    the documentation and/or other materials provided with the
- *    distribution.
- *
- * 3. All advertising materials mentioning features or use of this
- *    software must display the following acknowledgment:
- *    "This product includes software developed by the OpenSSL Project
- *    for use in the OpenSSL Toolkit. (http://www.openssl.org/)"
- *
- * 4. The names "OpenSSL Toolkit" and "OpenSSL Project" must not be used to
- *    endorse or promote products derived from this software without
- *    prior written permission. For written permission, please contact
- *    openssl-core@openssl.org.
- *
- * 5. Products derived from this software may not be called "OpenSSL"
- *    nor may "OpenSSL" appear in their names without prior written
- *    permission of the OpenSSL Project.
- *
- * 6. Redistributions of any form whatsoever must retain the following
- *    acknowledgment:
- *    "This product includes software developed by the OpenSSL Project
- *    for use in the OpenSSL Toolkit (http://www.openssl.org/)"
- *
- * THIS SOFTWARE IS PROVIDED BY THE OpenSSL PROJECT ``AS IS'' AND ANY
- * EXPRESSED OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
- * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR
- * PURPOSE ARE DISCLAIMED.  IN NO EVENT SHALL THE OpenSSL PROJECT OR
- * ITS CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
- * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
- * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
- * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
- * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
- * STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
- * ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED
- * OF THE POSSIBILITY OF SUCH DAMAGE.
- * ====================================================================
- *
- * This product includes cryptographic software written by Eric Young
- * (eay@cryptsoft.com).  This product includes software written by Tim
- * Hudson (tjh@cryptsoft.com).
- *
- */
-/* Copyright (C) 1995-1998 Eric Young (eay@cryptsoft.com)
- * All rights reserved.
- *
- * This package is an SSL implementation written
- * by Eric Young (eay@cryptsoft.com).
- * The implementation was written so as to conform with Netscapes SSL.
- * 
- * This library is free for commercial and non-commercial use as long as
- * the following conditions are aheared to.  The following conditions
- * apply to all code found in this distribution, be it the RC4, RSA,
- * lhash, DES, etc., code; not just the SSL code.  The SSL documentation
- * included with this distribution is covered by the same copyright terms
- * except that the holder is Tim Hudson (tjh@cryptsoft.com).
- * 
- * Copyright remains Eric Young's, and as such any Copyright notices in
- * the code are not to be removed.
- * If this package is used in a product, Eric Young should be given attribution
- * as the author of the parts of the library used.
- * This can be in the form of a textual message at program startup or
- * in documentation (online or textual) provided with the package.
- * 
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions
- * are met:
- * 1. Redistributions of source code must retain the copyright
- *    notice, this list of conditions and the following disclaimer.
- * 2. Redistributions in binary form must reproduce the above copyright
- *    notice, this list of conditions and the following disclaimer in the
- *    documentation and/or other materials provided with the distribution.
- * 3. All advertising materials mentioning features or use of this software
- *    must display the following acknowledgement:
- *    "This product includes cryptographic software written by
- *     Eric Young (eay@cryptsoft.com)"
- *    The word 'cryptographic' can be left out if the rouines from the library
- *    being used are not cryptographic related :-).
- * 4. If you include any Windows specific code (or a derivative thereof) from 
- *    the apps directory (application code) you must include an acknowledgement:
- *    "This product includes software written by Tim Hudson (tjh@cryptsoft.com)"
- * 
- * THIS SOFTWARE IS PROVIDED BY ERIC YOUNG ``AS IS'' AND
- * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
- * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
- * ARE DISCLAIMED.  IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE
- * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
- * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
- * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
- * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
- * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
- * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
- * SUCH DAMAGE.
- * 
- * The licence and distribution terms for any publically available version or
- * derivative of this code cannot be changed.  i.e. this code cannot simply be
- * copied and put under another distribution licence
- * [including the GNU Public Licence.]
- */
-
-#include "cryptlib.h"
-#include "bn_lcl.h"
-
-
-#if 0 /* now just a #define */
-int BN_mod(BIGNUM *rem, const BIGNUM *m, const BIGNUM *d, BN_CTX *ctx)
-	{
-	return(BN_div(NULL,rem,m,d,ctx));
-	/* note that  rem->neg == m->neg  (unless the remainder is zero) */
-	}
-#endif
-
-
-int BN_nnmod(BIGNUM *r, const BIGNUM *m, const BIGNUM *d, BN_CTX *ctx)
-	{
-	/* like BN_mod, but returns non-negative remainder
-	 * (i.e.,  0 <= r < |d|  always holds) */
-
-	if (!(BN_mod(r,m,d,ctx)))
-		return 0;
-	if (!r->neg)
-		return 1;
-	/* now   -|d| < r < 0,  so we have to set  r := r + |d| */
-	return (d->neg ? BN_sub : BN_add)(r, r, d);
-}
-
-
-int BN_mod_add(BIGNUM *r, const BIGNUM *a, const BIGNUM *b, const BIGNUM *m, BN_CTX *ctx)
-	{
-	if (!BN_add(r, a, b)) return 0;
-	return BN_nnmod(r, r, m, ctx);
-	}
-
-
-/* BN_mod_add variant that may be used if both  a  and  b  are non-negative
- * and less than  m */
-int BN_mod_add_quick(BIGNUM *r, const BIGNUM *a, const BIGNUM *b, const BIGNUM *m)
-	{
-	if (!BN_uadd(r, a, b)) return 0;
-	if (BN_ucmp(r, m) >= 0)
-		return BN_usub(r, r, m);
-	return 1;
-	}
-
-
-int BN_mod_sub(BIGNUM *r, const BIGNUM *a, const BIGNUM *b, const BIGNUM *m, BN_CTX *ctx)
-	{
-	if (!BN_sub(r, a, b)) return 0;
-	return BN_nnmod(r, r, m, ctx);
-	}
-
-
-/* BN_mod_sub variant that may be used if both  a  and  b  are non-negative
- * and less than  m */
-int BN_mod_sub_quick(BIGNUM *r, const BIGNUM *a, const BIGNUM *b, const BIGNUM *m)
-	{
-	if (!BN_sub(r, a, b)) return 0;
-	if (r->neg)
-		return BN_add(r, r, m);
-	return 1;
-	}
-
-
-/* slow but works */
-int BN_mod_mul(BIGNUM *r, const BIGNUM *a, const BIGNUM *b, const BIGNUM *m,
-	BN_CTX *ctx)
-	{
-	BIGNUM *t;
-	int ret=0;
-
-	bn_check_top(a);
-	bn_check_top(b);
-	bn_check_top(m);
-
-	BN_CTX_start(ctx);
-	if ((t = BN_CTX_get(ctx)) == NULL) goto err;
-	if (a == b)
-		{ if (!BN_sqr(t,a,ctx)) goto err; }
-	else
-		{ if (!BN_mul(t,a,b,ctx)) goto err; }
-	if (!BN_nnmod(r,t,m,ctx)) goto err;
-	bn_check_top(r);
-	ret=1;
-err:
-	BN_CTX_end(ctx);
-	return(ret);
-	}
-
-
-int BN_mod_sqr(BIGNUM *r, const BIGNUM *a, const BIGNUM *m, BN_CTX *ctx)
-	{
-	if (!BN_sqr(r, a, ctx)) return 0;
-	/* r->neg == 0,  thus we don't need BN_nnmod */
-	return BN_mod(r, r, m, ctx);
-	}
-
-
-int BN_mod_lshift1(BIGNUM *r, const BIGNUM *a, const BIGNUM *m, BN_CTX *ctx)
-	{
-	if (!BN_lshift1(r, a)) return 0;
-	bn_check_top(r);
-	return BN_nnmod(r, r, m, ctx);
-	}
-
-
-/* BN_mod_lshift1 variant that may be used if  a  is non-negative
- * and less than  m */
-int BN_mod_lshift1_quick(BIGNUM *r, const BIGNUM *a, const BIGNUM *m)
-	{
-	if (!BN_lshift1(r, a)) return 0;
-	bn_check_top(r);
-	if (BN_cmp(r, m) >= 0)
-		return BN_sub(r, r, m);
-	return 1;
-	}
-
-
-int BN_mod_lshift(BIGNUM *r, const BIGNUM *a, int n, const BIGNUM *m, BN_CTX *ctx)
-	{
-	BIGNUM *abs_m = NULL;
-	int ret;
-
-	if (!BN_nnmod(r, a, m, ctx)) return 0;
-
-	if (m->neg)
-		{
-		abs_m = BN_dup(m);
-		if (abs_m == NULL) return 0;
-		abs_m->neg = 0;
-		}
-	
-	ret = BN_mod_lshift_quick(r, r, n, (abs_m ? abs_m : m));
-	bn_check_top(r);
-
-	if (abs_m)
-		BN_free(abs_m);
-	return ret;
-	}
-
-
-/* BN_mod_lshift variant that may be used if  a  is non-negative
- * and less than  m */
-int BN_mod_lshift_quick(BIGNUM *r, const BIGNUM *a, int n, const BIGNUM *m)
-	{
-	if (r != a)
-		{
-		if (BN_copy(r, a) == NULL) return 0;
-		}
-
-	while (n > 0)
-		{
-		int max_shift;
-		
-		/* 0 < r < m */
-		max_shift = BN_num_bits(m) - BN_num_bits(r);
-		/* max_shift >= 0 */
-
-		if (max_shift < 0)
-			{
-			BNerr(BN_F_BN_MOD_LSHIFT_QUICK, BN_R_INPUT_NOT_REDUCED);
-			return 0;
-			}
-
-		if (max_shift > n)
-			max_shift = n;
-
-		if (max_shift)
-			{
-			if (!BN_lshift(r, r, max_shift)) return 0;
-			n -= max_shift;
-			}
-		else
-			{
-			if (!BN_lshift1(r, r)) return 0;
-			--n;
-			}
-
-		/* BN_num_bits(r) <= BN_num_bits(m) */
-
-		if (BN_cmp(r, m) >= 0) 
-			{
-			if (!BN_sub(r, r, m)) return 0;
-			}
-		}
-	bn_check_top(r);
-	
-	return 1;
-	}
diff --git a/crypto/openssl/crypto/bn/bn_mont.c b/crypto/openssl/crypto/bn/bn_mont.c
deleted file mode 100644
index 961ca67ea1f5..000000000000
--- a/crypto/openssl/crypto/bn/bn_mont.c
+++ /dev/null
@@ -1,437 +0,0 @@
-/* crypto/bn/bn_mont.c */
-/* Copyright (C) 1995-1998 Eric Young (eay@cryptsoft.com)
- * All rights reserved.
- *
- * This package is an SSL implementation written
- * by Eric Young (eay@cryptsoft.com).
- * The implementation was written so as to conform with Netscapes SSL.
- * 
- * This library is free for commercial and non-commercial use as long as
- * the following conditions are aheared to.  The following conditions
- * apply to all code found in this distribution, be it the RC4, RSA,
- * lhash, DES, etc., code; not just the SSL code.  The SSL documentation
- * included with this distribution is covered by the same copyright terms
- * except that the holder is Tim Hudson (tjh@cryptsoft.com).
- * 
- * Copyright remains Eric Young's, and as such any Copyright notices in
- * the code are not to be removed.
- * If this package is used in a product, Eric Young should be given attribution
- * as the author of the parts of the library used.
- * This can be in the form of a textual message at program startup or
- * in documentation (online or textual) provided with the package.
- * 
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions
- * are met:
- * 1. Redistributions of source code must retain the copyright
- *    notice, this list of conditions and the following disclaimer.
- * 2. Redistributions in binary form must reproduce the above copyright
- *    notice, this list of conditions and the following disclaimer in the
- *    documentation and/or other materials provided with the distribution.
- * 3. All advertising materials mentioning features or use of this software
- *    must display the following acknowledgement:
- *    "This product includes cryptographic software written by
- *     Eric Young (eay@cryptsoft.com)"
- *    The word 'cryptographic' can be left out if the rouines from the library
- *    being used are not cryptographic related :-).
- * 4. If you include any Windows specific code (or a derivative thereof) from 
- *    the apps directory (application code) you must include an acknowledgement:
- *    "This product includes software written by Tim Hudson (tjh@cryptsoft.com)"
- * 
- * THIS SOFTWARE IS PROVIDED BY ERIC YOUNG ``AS IS'' AND
- * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
- * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
- * ARE DISCLAIMED.  IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE
- * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
- * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
- * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
- * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
- * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
- * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
- * SUCH DAMAGE.
- * 
- * The licence and distribution terms for any publically available version or
- * derivative of this code cannot be changed.  i.e. this code cannot simply be
- * copied and put under another distribution licence
- * [including the GNU Public Licence.]
- */
-/* ====================================================================
- * Copyright (c) 1998-2006 The OpenSSL Project.  All rights reserved.
- *
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions
- * are met:
- *
- * 1. Redistributions of source code must retain the above copyright
- *    notice, this list of conditions and the following disclaimer. 
- *
- * 2. Redistributions in binary form must reproduce the above copyright
- *    notice, this list of conditions and the following disclaimer in
- *    the documentation and/or other materials provided with the
- *    distribution.
- *
- * 3. All advertising materials mentioning features or use of this
- *    software must display the following acknowledgment:
- *    "This product includes software developed by the OpenSSL Project
- *    for use in the OpenSSL Toolkit. (http://www.openssl.org/)"
- *
- * 4. The names "OpenSSL Toolkit" and "OpenSSL Project" must not be used to
- *    endorse or promote products derived from this software without
- *    prior written permission. For written permission, please contact
- *    openssl-core@openssl.org.
- *
- * 5. Products derived from this software may not be called "OpenSSL"
- *    nor may "OpenSSL" appear in their names without prior written
- *    permission of the OpenSSL Project.
- *
- * 6. Redistributions of any form whatsoever must retain the following
- *    acknowledgment:
- *    "This product includes software developed by the OpenSSL Project
- *    for use in the OpenSSL Toolkit (http://www.openssl.org/)"
- *
- * THIS SOFTWARE IS PROVIDED BY THE OpenSSL PROJECT ``AS IS'' AND ANY
- * EXPRESSED OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
- * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR
- * PURPOSE ARE DISCLAIMED.  IN NO EVENT SHALL THE OpenSSL PROJECT OR
- * ITS CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
- * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
- * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
- * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
- * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
- * STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
- * ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED
- * OF THE POSSIBILITY OF SUCH DAMAGE.
- * ====================================================================
- *
- * This product includes cryptographic software written by Eric Young
- * (eay@cryptsoft.com).  This product includes software written by Tim
- * Hudson (tjh@cryptsoft.com).
- *
- */
-
-/*
- * Details about Montgomery multiplication algorithms can be found at
- * http://security.ece.orst.edu/publications.html, e.g.
- * http://security.ece.orst.edu/koc/papers/j37acmon.pdf and
- * sections 3.8 and 4.2 in http://security.ece.orst.edu/koc/papers/r01rsasw.pdf
- */
-
-#include <stdio.h>
-#include "cryptlib.h"
-#include "bn_lcl.h"
-
-#define MONT_WORD /* use the faster word-based algorithm */
-
-int BN_mod_mul_montgomery(BIGNUM *r, const BIGNUM *a, const BIGNUM *b,
-			  BN_MONT_CTX *mont, BN_CTX *ctx)
-	{
-	BIGNUM *tmp;
-	int ret=0;
-
-	BN_CTX_start(ctx);
-	tmp = BN_CTX_get(ctx);
-	if (tmp == NULL) goto err;
-
-	bn_check_top(tmp);
-	if (a == b)
-		{
-		if (!BN_sqr(tmp,a,ctx)) goto err;
-		}
-	else
-		{
-		if (!BN_mul(tmp,a,b,ctx)) goto err;
-		}
-	/* reduce from aRR to aR */
-	if (!BN_from_montgomery(r,tmp,mont,ctx)) goto err;
-	bn_check_top(r);
-	ret=1;
-err:
-	BN_CTX_end(ctx);
-	return(ret);
-	}
-
-int BN_from_montgomery(BIGNUM *ret, const BIGNUM *a, BN_MONT_CTX *mont,
-	     BN_CTX *ctx)
-	{
-	int retn=0;
-
-#ifdef MONT_WORD
-	BIGNUM *n,*r;
-	BN_ULONG *ap,*np,*rp,n0,v,*nrp;
-	int al,nl,max,i,x,ri;
-
-	BN_CTX_start(ctx);
-	if ((r = BN_CTX_get(ctx)) == NULL) goto err;
-
-	if (!BN_copy(r,a)) goto err;
-	n= &(mont->N);
-
-	ap=a->d;
-	/* mont->ri is the size of mont->N in bits (rounded up
-	   to the word size) */
-	al=ri=mont->ri/BN_BITS2;
-	
-	nl=n->top;
-	if ((al == 0) || (nl == 0)) { r->top=0; return(1); }
-
-	max=(nl+al+1); /* allow for overflow (no?) XXX */
-	if (bn_wexpand(r,max) == NULL) goto err;
-	if (bn_wexpand(ret,max) == NULL) goto err;
-
-	r->neg=a->neg^n->neg;
-	np=n->d;
-	rp=r->d;
-	nrp= &(r->d[nl]);
-
-	/* clear the top words of T */
-#if 1
-	for (i=r->top; i<max; i++) /* memset? XXX */
-		r->d[i]=0;
-#else
-	memset(&(r->d[r->top]),0,(max-r->top)*sizeof(BN_ULONG)); 
-#endif
-
-	r->top=max;
-	n0=mont->n0;
-
-#ifdef BN_COUNT
-	fprintf(stderr,"word BN_from_montgomery %d * %d\n",nl,nl);
-#endif
-	for (i=0; i<nl; i++)
-		{
-#ifdef __TANDEM
-                {
-                   long long t1;
-                   long long t2;
-                   long long t3;
-                   t1 = rp[0] * (n0 & 0177777);
-                   t2 = 037777600000l;
-                   t2 = n0 & t2;
-                   t3 = rp[0] & 0177777;
-                   t2 = (t3 * t2) & BN_MASK2;
-                   t1 = t1 + t2;
-                   v=bn_mul_add_words(rp,np,nl,(BN_ULONG) t1);
-                }
-#else
-		v=bn_mul_add_words(rp,np,nl,(rp[0]*n0)&BN_MASK2);
-#endif
-		nrp++;
-		rp++;
-		if (((nrp[-1]+=v)&BN_MASK2) >= v)
-			continue;
-		else
-			{
-			if (((++nrp[0])&BN_MASK2) != 0) continue;
-			if (((++nrp[1])&BN_MASK2) != 0) continue;
-			for (x=2; (((++nrp[x])&BN_MASK2) == 0); x++) ;
-			}
-		}
-	bn_correct_top(r);
-	
-	/* mont->ri will be a multiple of the word size */
-#if 0
-	BN_rshift(ret,r,mont->ri);
-#else
-	ret->neg = r->neg;
-	x=ri;
-	rp=ret->d;
-	ap= &(r->d[x]);
-	if (r->top < x)
-		al=0;
-	else
-		al=r->top-x;
-	ret->top=al;
-	al-=4;
-	for (i=0; i<al; i+=4)
-		{
-		BN_ULONG t1,t2,t3,t4;
-		
-		t1=ap[i+0];
-		t2=ap[i+1];
-		t3=ap[i+2];
-		t4=ap[i+3];
-		rp[i+0]=t1;
-		rp[i+1]=t2;
-		rp[i+2]=t3;
-		rp[i+3]=t4;
-		}
-	al+=4;
-	for (; i<al; i++)
-		rp[i]=ap[i];
-#endif
-#else /* !MONT_WORD */ 
-	BIGNUM *t1,*t2;
-
-	BN_CTX_start(ctx);
-	t1 = BN_CTX_get(ctx);
-	t2 = BN_CTX_get(ctx);
-	if (t1 == NULL || t2 == NULL) goto err;
-	
-	if (!BN_copy(t1,a)) goto err;
-	BN_mask_bits(t1,mont->ri);
-
-	if (!BN_mul(t2,t1,&mont->Ni,ctx)) goto err;
-	BN_mask_bits(t2,mont->ri);
-
-	if (!BN_mul(t1,t2,&mont->N,ctx)) goto err;
-	if (!BN_add(t2,a,t1)) goto err;
-	if (!BN_rshift(ret,t2,mont->ri)) goto err;
-#endif /* MONT_WORD */
-
-	if (BN_ucmp(ret, &(mont->N)) >= 0)
-		{
-		if (!BN_usub(ret,ret,&(mont->N))) goto err;
-		}
-	retn=1;
-	bn_check_top(ret);
- err:
-	BN_CTX_end(ctx);
-	return(retn);
-	}
-
-BN_MONT_CTX *BN_MONT_CTX_new(void)
-	{
-	BN_MONT_CTX *ret;
-
-	if ((ret=(BN_MONT_CTX *)OPENSSL_malloc(sizeof(BN_MONT_CTX))) == NULL)
-		return(NULL);
-
-	BN_MONT_CTX_init(ret);
-	ret->flags=BN_FLG_MALLOCED;
-	return(ret);
-	}
-
-void BN_MONT_CTX_init(BN_MONT_CTX *ctx)
-	{
-	ctx->ri=0;
-	BN_init(&(ctx->RR));
-	BN_init(&(ctx->N));
-	BN_init(&(ctx->Ni));
-	ctx->flags=0;
-	}
-
-void BN_MONT_CTX_free(BN_MONT_CTX *mont)
-	{
-	if(mont == NULL)
-	    return;
-
-	BN_free(&(mont->RR));
-	BN_free(&(mont->N));
-	BN_free(&(mont->Ni));
-	if (mont->flags & BN_FLG_MALLOCED)
-		OPENSSL_free(mont);
-	}
-
-int BN_MONT_CTX_set(BN_MONT_CTX *mont, const BIGNUM *mod, BN_CTX *ctx)
-	{
-	int ret = 0;
-	BIGNUM *Ri,*R;
-
-	BN_CTX_start(ctx);
-	if((Ri = BN_CTX_get(ctx)) == NULL) goto err;
-	R= &(mont->RR);					/* grab RR as a temp */
-	if (!BN_copy(&(mont->N),mod)) goto err;		/* Set N */
-	mont->N.neg = 0;
-
-#ifdef MONT_WORD
-		{
-		BIGNUM tmod;
-		BN_ULONG buf[2];
-
-		mont->ri=(BN_num_bits(mod)+(BN_BITS2-1))/BN_BITS2*BN_BITS2;
-		BN_zero(R);
-		if (!(BN_set_bit(R,BN_BITS2))) goto err;	/* R */
-
-		buf[0]=mod->d[0]; /* tmod = N mod word size */
-		buf[1]=0;
-		tmod.d=buf;
-		tmod.top = buf[0] != 0 ? 1 : 0;
-		tmod.dmax=2;
-		tmod.neg=0;
-							/* Ri = R^-1 mod N*/
-		if ((BN_mod_inverse(Ri,R,&tmod,ctx)) == NULL)
-			goto err;
-		if (!BN_lshift(Ri,Ri,BN_BITS2)) goto err; /* R*Ri */
-		if (!BN_is_zero(Ri))
-			{
-			if (!BN_sub_word(Ri,1)) goto err;
-			}
-		else /* if N mod word size == 1 */
-			{
-			if (!BN_set_word(Ri,BN_MASK2)) goto err;  /* Ri-- (mod word size) */
-			}
-		if (!BN_div(Ri,NULL,Ri,&tmod,ctx)) goto err;
-		/* Ni = (R*Ri-1)/N,
-		 * keep only least significant word: */
-		mont->n0 = (Ri->top > 0) ? Ri->d[0] : 0;
-		}
-#else /* !MONT_WORD */
-		{ /* bignum version */
-		mont->ri=BN_num_bits(&mont->N);
-		BN_zero(R);
-		if (!BN_set_bit(R,mont->ri)) goto err;  /* R = 2^ri */
-		                                        /* Ri = R^-1 mod N*/
-		if ((BN_mod_inverse(Ri,R,&mont->N,ctx)) == NULL)
-			goto err;
-		if (!BN_lshift(Ri,Ri,mont->ri)) goto err; /* R*Ri */
-		if (!BN_sub_word(Ri,1)) goto err;
-							/* Ni = (R*Ri-1) / N */
-		if (!BN_div(&(mont->Ni),NULL,Ri,&mont->N,ctx)) goto err;
-		}
-#endif
-
-	/* setup RR for conversions */
-	BN_zero(&(mont->RR));
-	if (!BN_set_bit(&(mont->RR),mont->ri*2)) goto err;
-	if (!BN_mod(&(mont->RR),&(mont->RR),&(mont->N),ctx)) goto err;
-
-	ret = 1;
-err:
-	BN_CTX_end(ctx);
-	return ret;
-	}
-
-BN_MONT_CTX *BN_MONT_CTX_copy(BN_MONT_CTX *to, BN_MONT_CTX *from)
-	{
-	if (to == from) return(to);
-
-	if (!BN_copy(&(to->RR),&(from->RR))) return NULL;
-	if (!BN_copy(&(to->N),&(from->N))) return NULL;
-	if (!BN_copy(&(to->Ni),&(from->Ni))) return NULL;
-	to->ri=from->ri;
-	to->n0=from->n0;
-	return(to);
-	}
-
-BN_MONT_CTX *BN_MONT_CTX_set_locked(BN_MONT_CTX **pmont, int lock,
-					const BIGNUM *mod, BN_CTX *ctx)
-	{
-	int got_write_lock = 0;
-	BN_MONT_CTX *ret;
-
-	CRYPTO_r_lock(lock);
-	if (!*pmont)
-		{
-		CRYPTO_r_unlock(lock);
-		CRYPTO_w_lock(lock);
-		got_write_lock = 1;
-
-		if (!*pmont)
-			{
-			ret = BN_MONT_CTX_new();
-			if (ret && !BN_MONT_CTX_set(ret, mod, ctx))
-				BN_MONT_CTX_free(ret);
-			else
-				*pmont = ret;
-			}
-		}
-	
-	ret = *pmont;
-	
-	if (got_write_lock)
-		CRYPTO_w_unlock(lock);
-	else
-		CRYPTO_r_unlock(lock);
-		
-	return ret;
-	}
diff --git a/crypto/openssl/crypto/bn/bn_mpi.c b/crypto/openssl/crypto/bn/bn_mpi.c
deleted file mode 100644
index a054d21aed6b..000000000000
--- a/crypto/openssl/crypto/bn/bn_mpi.c
+++ /dev/null
@@ -1,130 +0,0 @@
-/* crypto/bn/bn_mpi.c */
-/* Copyright (C) 1995-1998 Eric Young (eay@cryptsoft.com)
- * All rights reserved.
- *
- * This package is an SSL implementation written
- * by Eric Young (eay@cryptsoft.com).
- * The implementation was written so as to conform with Netscapes SSL.
- * 
- * This library is free for commercial and non-commercial use as long as
- * the following conditions are aheared to.  The following conditions
- * apply to all code found in this distribution, be it the RC4, RSA,
- * lhash, DES, etc., code; not just the SSL code.  The SSL documentation
- * included with this distribution is covered by the same copyright terms
- * except that the holder is Tim Hudson (tjh@cryptsoft.com).
- * 
- * Copyright remains Eric Young's, and as such any Copyright notices in
- * the code are not to be removed.
- * If this package is used in a product, Eric Young should be given attribution
- * as the author of the parts of the library used.
- * This can be in the form of a textual message at program startup or
- * in documentation (online or textual) provided with the package.
- * 
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions
- * are met:
- * 1. Redistributions of source code must retain the copyright
- *    notice, this list of conditions and the following disclaimer.
- * 2. Redistributions in binary form must reproduce the above copyright
- *    notice, this list of conditions and the following disclaimer in the
- *    documentation and/or other materials provided with the distribution.
- * 3. All advertising materials mentioning features or use of this software
- *    must display the following acknowledgement:
- *    "This product includes cryptographic software written by
- *     Eric Young (eay@cryptsoft.com)"
- *    The word 'cryptographic' can be left out if the rouines from the library
- *    being used are not cryptographic related :-).
- * 4. If you include any Windows specific code (or a derivative thereof) from 
- *    the apps directory (application code) you must include an acknowledgement:
- *    "This product includes software written by Tim Hudson (tjh@cryptsoft.com)"
- * 
- * THIS SOFTWARE IS PROVIDED BY ERIC YOUNG ``AS IS'' AND
- * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
- * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
- * ARE DISCLAIMED.  IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE
- * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
- * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
- * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
- * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
- * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
- * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
- * SUCH DAMAGE.
- * 
- * The licence and distribution terms for any publically available version or
- * derivative of this code cannot be changed.  i.e. this code cannot simply be
- * copied and put under another distribution licence
- * [including the GNU Public Licence.]
- */
-
-#include <stdio.h>
-#include "cryptlib.h"
-#include "bn_lcl.h"
-
-int BN_bn2mpi(const BIGNUM *a, unsigned char *d)
-	{
-	int bits;
-	int num=0;
-	int ext=0;
-	long l;
-
-	bits=BN_num_bits(a);
-	num=(bits+7)/8;
-	if (bits > 0)
-		{
-		ext=((bits & 0x07) == 0);
-		}
-	if (d == NULL)
-		return(num+4+ext);
-
-	l=num+ext;
-	d[0]=(unsigned char)(l>>24)&0xff;
-	d[1]=(unsigned char)(l>>16)&0xff;
-	d[2]=(unsigned char)(l>> 8)&0xff;
-	d[3]=(unsigned char)(l    )&0xff;
-	if (ext) d[4]=0;
-	num=BN_bn2bin(a,&(d[4+ext]));
-	if (a->neg)
-		d[4]|=0x80;
-	return(num+4+ext);
-	}
-
-BIGNUM *BN_mpi2bn(const unsigned char *d, int n, BIGNUM *a)
-	{
-	long len;
-	int neg=0;
-
-	if (n < 4)
-		{
-		BNerr(BN_F_BN_MPI2BN,BN_R_INVALID_LENGTH);
-		return(NULL);
-		}
-	len=((long)d[0]<<24)|((long)d[1]<<16)|((int)d[2]<<8)|(int)d[3];
-	if ((len+4) != n)
-		{
-		BNerr(BN_F_BN_MPI2BN,BN_R_ENCODING_ERROR);
-		return(NULL);
-		}
-
-	if (a == NULL) a=BN_new();
-	if (a == NULL) return(NULL);
-
-	if (len == 0)
-		{
-		a->neg=0;
-		a->top=0;
-		return(a);
-		}
-	d+=4;
-	if ((*d) & 0x80)
-		neg=1;
-	if (BN_bin2bn(d,(int)len,a) == NULL)
-		return(NULL);
-	a->neg=neg;
-	if (neg)
-		{
-		BN_clear_bit(a,BN_num_bits(a)-1);
-		}
-	bn_check_top(a);
-	return(a);
-	}
-
diff --git a/crypto/openssl/crypto/bn/bn_mul.c b/crypto/openssl/crypto/bn/bn_mul.c
deleted file mode 100644
index aec1eafc65fb..000000000000
--- a/crypto/openssl/crypto/bn/bn_mul.c
+++ /dev/null
@@ -1,1164 +0,0 @@
-/* crypto/bn/bn_mul.c */
-/* Copyright (C) 1995-1998 Eric Young (eay@cryptsoft.com)
- * All rights reserved.
- *
- * This package is an SSL implementation written
- * by Eric Young (eay@cryptsoft.com).
- * The implementation was written so as to conform with Netscapes SSL.
- * 
- * This library is free for commercial and non-commercial use as long as
- * the following conditions are aheared to.  The following conditions
- * apply to all code found in this distribution, be it the RC4, RSA,
- * lhash, DES, etc., code; not just the SSL code.  The SSL documentation
- * included with this distribution is covered by the same copyright terms
- * except that the holder is Tim Hudson (tjh@cryptsoft.com).
- * 
- * Copyright remains Eric Young's, and as such any Copyright notices in
- * the code are not to be removed.
- * If this package is used in a product, Eric Young should be given attribution
- * as the author of the parts of the library used.
- * This can be in the form of a textual message at program startup or
- * in documentation (online or textual) provided with the package.
- * 
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions
- * are met:
- * 1. Redistributions of source code must retain the copyright
- *    notice, this list of conditions and the following disclaimer.
- * 2. Redistributions in binary form must reproduce the above copyright
- *    notice, this list of conditions and the following disclaimer in the
- *    documentation and/or other materials provided with the distribution.
- * 3. All advertising materials mentioning features or use of this software
- *    must display the following acknowledgement:
- *    "This product includes cryptographic software written by
- *     Eric Young (eay@cryptsoft.com)"
- *    The word 'cryptographic' can be left out if the rouines from the library
- *    being used are not cryptographic related :-).
- * 4. If you include any Windows specific code (or a derivative thereof) from 
- *    the apps directory (application code) you must include an acknowledgement:
- *    "This product includes software written by Tim Hudson (tjh@cryptsoft.com)"
- * 
- * THIS SOFTWARE IS PROVIDED BY ERIC YOUNG ``AS IS'' AND
- * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
- * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
- * ARE DISCLAIMED.  IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE
- * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
- * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
- * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
- * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
- * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
- * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
- * SUCH DAMAGE.
- * 
- * The licence and distribution terms for any publically available version or
- * derivative of this code cannot be changed.  i.e. this code cannot simply be
- * copied and put under another distribution licence
- * [including the GNU Public Licence.]
- */
-
-#ifndef BN_DEBUG
-# undef NDEBUG /* avoid conflicting definitions */
-# define NDEBUG
-#endif
-
-#include <stdio.h>
-#include <assert.h>
-#include "cryptlib.h"
-#include "bn_lcl.h"
-
-#if defined(OPENSSL_NO_ASM) || !defined(OPENSSL_BN_ASM_PART_WORDS)
-/* Here follows specialised variants of bn_add_words() and
-   bn_sub_words().  They have the property performing operations on
-   arrays of different sizes.  The sizes of those arrays is expressed through
-   cl, which is the common length ( basicall, min(len(a),len(b)) ), and dl,
-   which is the delta between the two lengths, calculated as len(a)-len(b).
-   All lengths are the number of BN_ULONGs...  For the operations that require
-   a result array as parameter, it must have the length cl+abs(dl).
-   These functions should probably end up in bn_asm.c as soon as there are
-   assembler counterparts for the systems that use assembler files.  */
-
-BN_ULONG bn_sub_part_words(BN_ULONG *r,
-	const BN_ULONG *a, const BN_ULONG *b,
-	int cl, int dl)
-	{
-	BN_ULONG c, t;
-
-	assert(cl >= 0);
-	c = bn_sub_words(r, a, b, cl);
-
-	if (dl == 0)
-		return c;
-
-	r += cl;
-	a += cl;
-	b += cl;
-
-	if (dl < 0)
-		{
-#ifdef BN_COUNT
-		fprintf(stderr, "  bn_sub_part_words %d + %d (dl < 0, c = %d)\n", cl, dl, c);
-#endif
-		for (;;)
-			{
-			t = b[0];
-			r[0] = (0-t-c)&BN_MASK2;
-			if (t != 0) c=1;
-			if (++dl >= 0) break;
-
-			t = b[1];
-			r[1] = (0-t-c)&BN_MASK2;
-			if (t != 0) c=1;
-			if (++dl >= 0) break;
-
-			t = b[2];
-			r[2] = (0-t-c)&BN_MASK2;
-			if (t != 0) c=1;
-			if (++dl >= 0) break;
-
-			t = b[3];
-			r[3] = (0-t-c)&BN_MASK2;
-			if (t != 0) c=1;
-			if (++dl >= 0) break;
-
-			b += 4;
-			r += 4;
-			}
-		}
-	else
-		{
-		int save_dl = dl;
-#ifdef BN_COUNT
-		fprintf(stderr, "  bn_sub_part_words %d + %d (dl > 0, c = %d)\n", cl, dl, c);
-#endif
-		while(c)
-			{
-			t = a[0];
-			r[0] = (t-c)&BN_MASK2;
-			if (t != 0) c=0;
-			if (--dl <= 0) break;
-
-			t = a[1];
-			r[1] = (t-c)&BN_MASK2;
-			if (t != 0) c=0;
-			if (--dl <= 0) break;
-
-			t = a[2];
-			r[2] = (t-c)&BN_MASK2;
-			if (t != 0) c=0;
-			if (--dl <= 0) break;
-
-			t = a[3];
-			r[3] = (t-c)&BN_MASK2;
-			if (t != 0) c=0;
-			if (--dl <= 0) break;
-
-			save_dl = dl;
-			a += 4;
-			r += 4;
-			}
-		if (dl > 0)
-			{
-#ifdef BN_COUNT
-			fprintf(stderr, "  bn_sub_part_words %d + %d (dl > 0, c == 0)\n", cl, dl);
-#endif
-			if (save_dl > dl)
-				{
-				switch (save_dl - dl)
-					{
-				case 1:
-					r[1] = a[1];
-					if (--dl <= 0) break;
-				case 2:
-					r[2] = a[2];
-					if (--dl <= 0) break;
-				case 3:
-					r[3] = a[3];
-					if (--dl <= 0) break;
-					}
-				a += 4;
-				r += 4;
-				}
-			}
-		if (dl > 0)
-			{
-#ifdef BN_COUNT
-			fprintf(stderr, "  bn_sub_part_words %d + %d (dl > 0, copy)\n", cl, dl);
-#endif
-			for(;;)
-				{
-				r[0] = a[0];
-				if (--dl <= 0) break;
-				r[1] = a[1];
-				if (--dl <= 0) break;
-				r[2] = a[2];
-				if (--dl <= 0) break;
-				r[3] = a[3];
-				if (--dl <= 0) break;
-
-				a += 4;
-				r += 4;
-				}
-			}
-		}
-	return c;
-	}
-#endif
-
-BN_ULONG bn_add_part_words(BN_ULONG *r,
-	const BN_ULONG *a, const BN_ULONG *b,
-	int cl, int dl)
-	{
-	BN_ULONG c, l, t;
-
-	assert(cl >= 0);
-	c = bn_add_words(r, a, b, cl);
-
-	if (dl == 0)
-		return c;
-
-	r += cl;
-	a += cl;
-	b += cl;
-
-	if (dl < 0)
-		{
-		int save_dl = dl;
-#ifdef BN_COUNT
-		fprintf(stderr, "  bn_add_part_words %d + %d (dl < 0, c = %d)\n", cl, dl, c);
-#endif
-		while (c)
-			{
-			l=(c+b[0])&BN_MASK2;
-			c=(l < c);
-			r[0]=l;
-			if (++dl >= 0) break;
-
-			l=(c+b[1])&BN_MASK2;
-			c=(l < c);
-			r[1]=l;
-			if (++dl >= 0) break;
-
-			l=(c+b[2])&BN_MASK2;
-			c=(l < c);
-			r[2]=l;
-			if (++dl >= 0) break;
-
-			l=(c+b[3])&BN_MASK2;
-			c=(l < c);
-			r[3]=l;
-			if (++dl >= 0) break;
-
-			save_dl = dl;
-			b+=4;
-			r+=4;
-			}
-		if (dl < 0)
-			{
-#ifdef BN_COUNT
-			fprintf(stderr, "  bn_add_part_words %d + %d (dl < 0, c == 0)\n", cl, dl);
-#endif
-			if (save_dl < dl)
-				{
-				switch (dl - save_dl)
-					{
-				case 1:
-					r[1] = b[1];
-					if (++dl >= 0) break;
-				case 2:
-					r[2] = b[2];
-					if (++dl >= 0) break;
-				case 3:
-					r[3] = b[3];
-					if (++dl >= 0) break;
-					}
-				b += 4;
-				r += 4;
-				}
-			}
-		if (dl < 0)
-			{
-#ifdef BN_COUNT
-			fprintf(stderr, "  bn_add_part_words %d + %d (dl < 0, copy)\n", cl, dl);
-#endif
-			for(;;)
-				{
-				r[0] = b[0];
-				if (++dl >= 0) break;
-				r[1] = b[1];
-				if (++dl >= 0) break;
-				r[2] = b[2];
-				if (++dl >= 0) break;
-				r[3] = b[3];
-				if (++dl >= 0) break;
-
-				b += 4;
-				r += 4;
-				}
-			}
-		}
-	else
-		{
-		int save_dl = dl;
-#ifdef BN_COUNT
-		fprintf(stderr, "  bn_add_part_words %d + %d (dl > 0)\n", cl, dl);
-#endif
-		while (c)
-			{
-			t=(a[0]+c)&BN_MASK2;
-			c=(t < c);
-			r[0]=t;
-			if (--dl <= 0) break;
-
-			t=(a[1]+c)&BN_MASK2;
-			c=(t < c);
-			r[1]=t;
-			if (--dl <= 0) break;
-
-			t=(a[2]+c)&BN_MASK2;
-			c=(t < c);
-			r[2]=t;
-			if (--dl <= 0) break;
-
-			t=(a[3]+c)&BN_MASK2;
-			c=(t < c);
-			r[3]=t;
-			if (--dl <= 0) break;
-
-			save_dl = dl;
-			a+=4;
-			r+=4;
-			}
-#ifdef BN_COUNT
-		fprintf(stderr, "  bn_add_part_words %d + %d (dl > 0, c == 0)\n", cl, dl);
-#endif
-		if (dl > 0)
-			{
-			if (save_dl > dl)
-				{
-				switch (save_dl - dl)
-					{
-				case 1:
-					r[1] = a[1];
-					if (--dl <= 0) break;
-				case 2:
-					r[2] = a[2];
-					if (--dl <= 0) break;
-				case 3:
-					r[3] = a[3];
-					if (--dl <= 0) break;
-					}
-				a += 4;
-				r += 4;
-				}
-			}
-		if (dl > 0)
-			{
-#ifdef BN_COUNT
-			fprintf(stderr, "  bn_add_part_words %d + %d (dl > 0, copy)\n", cl, dl);
-#endif
-			for(;;)
-				{
-				r[0] = a[0];
-				if (--dl <= 0) break;
-				r[1] = a[1];
-				if (--dl <= 0) break;
-				r[2] = a[2];
-				if (--dl <= 0) break;
-				r[3] = a[3];
-				if (--dl <= 0) break;
-
-				a += 4;
-				r += 4;
-				}
-			}
-		}
-	return c;
-	}
-
-#ifdef BN_RECURSION
-/* Karatsuba recursive multiplication algorithm
- * (cf. Knuth, The Art of Computer Programming, Vol. 2) */
-
-/* r is 2*n2 words in size,
- * a and b are both n2 words in size.
- * n2 must be a power of 2.
- * We multiply and return the result.
- * t must be 2*n2 words in size
- * We calculate
- * a[0]*b[0]
- * a[0]*b[0]+a[1]*b[1]+(a[0]-a[1])*(b[1]-b[0])
- * a[1]*b[1]
- */
-void bn_mul_recursive(BN_ULONG *r, BN_ULONG *a, BN_ULONG *b, int n2,
-	int dna, int dnb, BN_ULONG *t)
-	{
-	int n=n2/2,c1,c2;
-	int tna=n+dna, tnb=n+dnb;
-	unsigned int neg,zero;
-	BN_ULONG ln,lo,*p;
-
-# ifdef BN_COUNT
-	fprintf(stderr," bn_mul_recursive %d * %d\n",n2,n2);
-# endif
-# ifdef BN_MUL_COMBA
-#  if 0
-	if (n2 == 4)
-		{
-		bn_mul_comba4(r,a,b);
-		return;
-		}
-#  endif
-	/* Only call bn_mul_comba 8 if n2 == 8 and the
-	 * two arrays are complete [steve]
-	 */
-	if (n2 == 8 && dna == 0 && dnb == 0)
-		{
-		bn_mul_comba8(r,a,b);
-		return; 
-		}
-# endif /* BN_MUL_COMBA */
-	/* Else do normal multiply */
-	if (n2 < BN_MUL_RECURSIVE_SIZE_NORMAL)
-		{
-		bn_mul_normal(r,a,n2+dna,b,n2+dnb);
-		if ((dna + dnb) < 0)
-			memset(&r[2*n2 + dna + dnb], 0,
-				sizeof(BN_ULONG) * -(dna + dnb));
-		return;
-		}
-	/* r=(a[0]-a[1])*(b[1]-b[0]) */
-	c1=bn_cmp_part_words(a,&(a[n]),tna,n-tna);
-	c2=bn_cmp_part_words(&(b[n]),b,tnb,tnb-n);
-	zero=neg=0;
-	switch (c1*3+c2)
-		{
-	case -4:
-		bn_sub_part_words(t,      &(a[n]),a,      tna,tna-n); /* - */
-		bn_sub_part_words(&(t[n]),b,      &(b[n]),tnb,n-tnb); /* - */
-		break;
-	case -3:
-		zero=1;
-		break;
-	case -2:
-		bn_sub_part_words(t,      &(a[n]),a,      tna,tna-n); /* - */
-		bn_sub_part_words(&(t[n]),&(b[n]),b,      tnb,tnb-n); /* + */
-		neg=1;
-		break;
-	case -1:
-	case 0:
-	case 1:
-		zero=1;
-		break;
-	case 2:
-		bn_sub_part_words(t,      a,      &(a[n]),tna,n-tna); /* + */
-		bn_sub_part_words(&(t[n]),b,      &(b[n]),tnb,n-tnb); /* - */
-		neg=1;
-		break;
-	case 3:
-		zero=1;
-		break;
-	case 4:
-		bn_sub_part_words(t,      a,      &(a[n]),tna,n-tna);
-		bn_sub_part_words(&(t[n]),&(b[n]),b,      tnb,tnb-n);
-		break;
-		}
-
-# ifdef BN_MUL_COMBA
-	if (n == 4 && dna == 0 && dnb == 0) /* XXX: bn_mul_comba4 could take
-					       extra args to do this well */
-		{
-		if (!zero)
-			bn_mul_comba4(&(t[n2]),t,&(t[n]));
-		else
-			memset(&(t[n2]),0,8*sizeof(BN_ULONG));
-		
-		bn_mul_comba4(r,a,b);
-		bn_mul_comba4(&(r[n2]),&(a[n]),&(b[n]));
-		}
-	else if (n == 8 && dna == 0 && dnb == 0) /* XXX: bn_mul_comba8 could
-						    take extra args to do this
-						    well */
-		{
-		if (!zero)
-			bn_mul_comba8(&(t[n2]),t,&(t[n]));
-		else
-			memset(&(t[n2]),0,16*sizeof(BN_ULONG));
-		
-		bn_mul_comba8(r,a,b);
-		bn_mul_comba8(&(r[n2]),&(a[n]),&(b[n]));
-		}
-	else
-# endif /* BN_MUL_COMBA */
-		{
-		p= &(t[n2*2]);
-		if (!zero)
-			bn_mul_recursive(&(t[n2]),t,&(t[n]),n,0,0,p);
-		else
-			memset(&(t[n2]),0,n2*sizeof(BN_ULONG));
-		bn_mul_recursive(r,a,b,n,0,0,p);
-		bn_mul_recursive(&(r[n2]),&(a[n]),&(b[n]),n,dna,dnb,p);
-		}
-
-	/* t[32] holds (a[0]-a[1])*(b[1]-b[0]), c1 is the sign
-	 * r[10] holds (a[0]*b[0])
-	 * r[32] holds (b[1]*b[1])
-	 */
-
-	c1=(int)(bn_add_words(t,r,&(r[n2]),n2));
-
-	if (neg) /* if t[32] is negative */
-		{
-		c1-=(int)(bn_sub_words(&(t[n2]),t,&(t[n2]),n2));
-		}
-	else
-		{
-		/* Might have a carry */
-		c1+=(int)(bn_add_words(&(t[n2]),&(t[n2]),t,n2));
-		}
-
-	/* t[32] holds (a[0]-a[1])*(b[1]-b[0])+(a[0]*b[0])+(a[1]*b[1])
-	 * r[10] holds (a[0]*b[0])
-	 * r[32] holds (b[1]*b[1])
-	 * c1 holds the carry bits
-	 */
-	c1+=(int)(bn_add_words(&(r[n]),&(r[n]),&(t[n2]),n2));
-	if (c1)
-		{
-		p= &(r[n+n2]);
-		lo= *p;
-		ln=(lo+c1)&BN_MASK2;
-		*p=ln;
-
-		/* The overflow will stop before we over write
-		 * words we should not overwrite */
-		if (ln < (BN_ULONG)c1)
-			{
-			do	{
-				p++;
-				lo= *p;
-				ln=(lo+1)&BN_MASK2;
-				*p=ln;
-				} while (ln == 0);
-			}
-		}
-	}
-
-/* n+tn is the word length
- * t needs to be n*4 is size, as does r */
-void bn_mul_part_recursive(BN_ULONG *r, BN_ULONG *a, BN_ULONG *b, int n,
-	     int tna, int tnb, BN_ULONG *t)
-	{
-	int i,j,n2=n*2;
-	int c1,c2,neg,zero;
-	BN_ULONG ln,lo,*p;
-
-# ifdef BN_COUNT
-	fprintf(stderr," bn_mul_part_recursive (%d+%d) * (%d+%d)\n",
-		tna, n, tnb, n);
-# endif
-	if (n < 8)
-		{
-		bn_mul_normal(r,a,n+tna,b,n+tnb);
-		return;
-		}
-
-	/* r=(a[0]-a[1])*(b[1]-b[0]) */
-	c1=bn_cmp_part_words(a,&(a[n]),tna,n-tna);
-	c2=bn_cmp_part_words(&(b[n]),b,tnb,tnb-n);
-	zero=neg=0;
-	switch (c1*3+c2)
-		{
-	case -4:
-		bn_sub_part_words(t,      &(a[n]),a,      tna,tna-n); /* - */
-		bn_sub_part_words(&(t[n]),b,      &(b[n]),tnb,n-tnb); /* - */
-		break;
-	case -3:
-		zero=1;
-		/* break; */
-	case -2:
-		bn_sub_part_words(t,      &(a[n]),a,      tna,tna-n); /* - */
-		bn_sub_part_words(&(t[n]),&(b[n]),b,      tnb,tnb-n); /* + */
-		neg=1;
-		break;
-	case -1:
-	case 0:
-	case 1:
-		zero=1;
-		/* break; */
-	case 2:
-		bn_sub_part_words(t,      a,      &(a[n]),tna,n-tna); /* + */
-		bn_sub_part_words(&(t[n]),b,      &(b[n]),tnb,n-tnb); /* - */
-		neg=1;
-		break;
-	case 3:
-		zero=1;
-		/* break; */
-	case 4:
-		bn_sub_part_words(t,      a,      &(a[n]),tna,n-tna);
-		bn_sub_part_words(&(t[n]),&(b[n]),b,      tnb,tnb-n);
-		break;
-		}
-		/* The zero case isn't yet implemented here. The speedup
-		   would probably be negligible. */
-# if 0
-	if (n == 4)
-		{
-		bn_mul_comba4(&(t[n2]),t,&(t[n]));
-		bn_mul_comba4(r,a,b);
-		bn_mul_normal(&(r[n2]),&(a[n]),tn,&(b[n]),tn);
-		memset(&(r[n2+tn*2]),0,sizeof(BN_ULONG)*(n2-tn*2));
-		}
-	else
-# endif
-	if (n == 8)
-		{
-		bn_mul_comba8(&(t[n2]),t,&(t[n]));
-		bn_mul_comba8(r,a,b);
-		bn_mul_normal(&(r[n2]),&(a[n]),tna,&(b[n]),tnb);
-		memset(&(r[n2+tna+tnb]),0,sizeof(BN_ULONG)*(n2-tna-tnb));
-		}
-	else
-		{
-		p= &(t[n2*2]);
-		bn_mul_recursive(&(t[n2]),t,&(t[n]),n,0,0,p);
-		bn_mul_recursive(r,a,b,n,0,0,p);
-		i=n/2;
-		/* If there is only a bottom half to the number,
-		 * just do it */
-		if (tna > tnb)
-			j = tna - i;
-		else
-			j = tnb - i;
-		if (j == 0)
-			{
-			bn_mul_recursive(&(r[n2]),&(a[n]),&(b[n]),
-				i,tna-i,tnb-i,p);
-			memset(&(r[n2+i*2]),0,sizeof(BN_ULONG)*(n2-i*2));
-			}
-		else if (j > 0) /* eg, n == 16, i == 8 and tn == 11 */
-				{
-				bn_mul_part_recursive(&(r[n2]),&(a[n]),&(b[n]),
-					i,tna-i,tnb-i,p);
-				memset(&(r[n2+tna+tnb]),0,
-					sizeof(BN_ULONG)*(n2-tna-tnb));
-				}
-		else /* (j < 0) eg, n == 16, i == 8 and tn == 5 */
-			{
-			memset(&(r[n2]),0,sizeof(BN_ULONG)*n2);
-			if (tna < BN_MUL_RECURSIVE_SIZE_NORMAL
-				&& tnb < BN_MUL_RECURSIVE_SIZE_NORMAL)
-				{
-				bn_mul_normal(&(r[n2]),&(a[n]),tna,&(b[n]),tnb);
-				}
-			else
-				{
-				for (;;)
-					{
-					i/=2;
-					if (i < tna && i < tnb)
-						{
-						bn_mul_part_recursive(&(r[n2]),
-							&(a[n]),&(b[n]),
-							i,tna-i,tnb-i,p);
-						break;
-						}
-					else if (i <= tna && i <= tnb)
-						{
-						bn_mul_recursive(&(r[n2]),
-							&(a[n]),&(b[n]),
-							i,tna-i,tnb-i,p);
-						break;
-						}
-					}
-				}
-			}
-		}
-
-	/* t[32] holds (a[0]-a[1])*(b[1]-b[0]), c1 is the sign
-	 * r[10] holds (a[0]*b[0])
-	 * r[32] holds (b[1]*b[1])
-	 */
-
-	c1=(int)(bn_add_words(t,r,&(r[n2]),n2));
-
-	if (neg) /* if t[32] is negative */
-		{
-		c1-=(int)(bn_sub_words(&(t[n2]),t,&(t[n2]),n2));
-		}
-	else
-		{
-		/* Might have a carry */
-		c1+=(int)(bn_add_words(&(t[n2]),&(t[n2]),t,n2));
-		}
-
-	/* t[32] holds (a[0]-a[1])*(b[1]-b[0])+(a[0]*b[0])+(a[1]*b[1])
-	 * r[10] holds (a[0]*b[0])
-	 * r[32] holds (b[1]*b[1])
-	 * c1 holds the carry bits
-	 */
-	c1+=(int)(bn_add_words(&(r[n]),&(r[n]),&(t[n2]),n2));
-	if (c1)
-		{
-		p= &(r[n+n2]);
-		lo= *p;
-		ln=(lo+c1)&BN_MASK2;
-		*p=ln;
-
-		/* The overflow will stop before we over write
-		 * words we should not overwrite */
-		if (ln < (BN_ULONG)c1)
-			{
-			do	{
-				p++;
-				lo= *p;
-				ln=(lo+1)&BN_MASK2;
-				*p=ln;
-				} while (ln == 0);
-			}
-		}
-	}
-
-/* a and b must be the same size, which is n2.
- * r needs to be n2 words and t needs to be n2*2
- */
-void bn_mul_low_recursive(BN_ULONG *r, BN_ULONG *a, BN_ULONG *b, int n2,
-	     BN_ULONG *t)
-	{
-	int n=n2/2;
-
-# ifdef BN_COUNT
-	fprintf(stderr," bn_mul_low_recursive %d * %d\n",n2,n2);
-# endif
-
-	bn_mul_recursive(r,a,b,n,0,0,&(t[0]));
-	if (n >= BN_MUL_LOW_RECURSIVE_SIZE_NORMAL)
-		{
-		bn_mul_low_recursive(&(t[0]),&(a[0]),&(b[n]),n,&(t[n2]));
-		bn_add_words(&(r[n]),&(r[n]),&(t[0]),n);
-		bn_mul_low_recursive(&(t[0]),&(a[n]),&(b[0]),n,&(t[n2]));
-		bn_add_words(&(r[n]),&(r[n]),&(t[0]),n);
-		}
-	else
-		{
-		bn_mul_low_normal(&(t[0]),&(a[0]),&(b[n]),n);
-		bn_mul_low_normal(&(t[n]),&(a[n]),&(b[0]),n);
-		bn_add_words(&(r[n]),&(r[n]),&(t[0]),n);
-		bn_add_words(&(r[n]),&(r[n]),&(t[n]),n);
-		}
-	}
-
-/* a and b must be the same size, which is n2.
- * r needs to be n2 words and t needs to be n2*2
- * l is the low words of the output.
- * t needs to be n2*3
- */
-void bn_mul_high(BN_ULONG *r, BN_ULONG *a, BN_ULONG *b, BN_ULONG *l, int n2,
-	     BN_ULONG *t)
-	{
-	int i,n;
-	int c1,c2;
-	int neg,oneg,zero;
-	BN_ULONG ll,lc,*lp,*mp;
-
-# ifdef BN_COUNT
-	fprintf(stderr," bn_mul_high %d * %d\n",n2,n2);
-# endif
-	n=n2/2;
-
-	/* Calculate (al-ah)*(bh-bl) */
-	neg=zero=0;
-	c1=bn_cmp_words(&(a[0]),&(a[n]),n);
-	c2=bn_cmp_words(&(b[n]),&(b[0]),n);
-	switch (c1*3+c2)
-		{
-	case -4:
-		bn_sub_words(&(r[0]),&(a[n]),&(a[0]),n);
-		bn_sub_words(&(r[n]),&(b[0]),&(b[n]),n);
-		break;
-	case -3:
-		zero=1;
-		break;
-	case -2:
-		bn_sub_words(&(r[0]),&(a[n]),&(a[0]),n);
-		bn_sub_words(&(r[n]),&(b[n]),&(b[0]),n);
-		neg=1;
-		break;
-	case -1:
-	case 0:
-	case 1:
-		zero=1;
-		break;
-	case 2:
-		bn_sub_words(&(r[0]),&(a[0]),&(a[n]),n);
-		bn_sub_words(&(r[n]),&(b[0]),&(b[n]),n);
-		neg=1;
-		break;
-	case 3:
-		zero=1;
-		break;
-	case 4:
-		bn_sub_words(&(r[0]),&(a[0]),&(a[n]),n);
-		bn_sub_words(&(r[n]),&(b[n]),&(b[0]),n);
-		break;
-		}
-		
-	oneg=neg;
-	/* t[10] = (a[0]-a[1])*(b[1]-b[0]) */
-	/* r[10] = (a[1]*b[1]) */
-# ifdef BN_MUL_COMBA
-	if (n == 8)
-		{
-		bn_mul_comba8(&(t[0]),&(r[0]),&(r[n]));
-		bn_mul_comba8(r,&(a[n]),&(b[n]));
-		}
-	else
-# endif
-		{
-		bn_mul_recursive(&(t[0]),&(r[0]),&(r[n]),n,0,0,&(t[n2]));
-		bn_mul_recursive(r,&(a[n]),&(b[n]),n,0,0,&(t[n2]));
-		}
-
-	/* s0 == low(al*bl)
-	 * s1 == low(ah*bh)+low((al-ah)*(bh-bl))+low(al*bl)+high(al*bl)
-	 * We know s0 and s1 so the only unknown is high(al*bl)
-	 * high(al*bl) == s1 - low(ah*bh+s0+(al-ah)*(bh-bl))
-	 * high(al*bl) == s1 - (r[0]+l[0]+t[0])
-	 */
-	if (l != NULL)
-		{
-		lp= &(t[n2+n]);
-		c1=(int)(bn_add_words(lp,&(r[0]),&(l[0]),n));
-		}
-	else
-		{
-		c1=0;
-		lp= &(r[0]);
-		}
-
-	if (neg)
-		neg=(int)(bn_sub_words(&(t[n2]),lp,&(t[0]),n));
-	else
-		{
-		bn_add_words(&(t[n2]),lp,&(t[0]),n);
-		neg=0;
-		}
-
-	if (l != NULL)
-		{
-		bn_sub_words(&(t[n2+n]),&(l[n]),&(t[n2]),n);
-		}
-	else
-		{
-		lp= &(t[n2+n]);
-		mp= &(t[n2]);
-		for (i=0; i<n; i++)
-			lp[i]=((~mp[i])+1)&BN_MASK2;
-		}
-
-	/* s[0] = low(al*bl)
-	 * t[3] = high(al*bl)
-	 * t[10] = (a[0]-a[1])*(b[1]-b[0]) neg is the sign
-	 * r[10] = (a[1]*b[1])
-	 */
-	/* R[10] = al*bl
-	 * R[21] = al*bl + ah*bh + (a[0]-a[1])*(b[1]-b[0])
-	 * R[32] = ah*bh
-	 */
-	/* R[1]=t[3]+l[0]+r[0](+-)t[0] (have carry/borrow)
-	 * R[2]=r[0]+t[3]+r[1](+-)t[1] (have carry/borrow)
-	 * R[3]=r[1]+(carry/borrow)
-	 */
-	if (l != NULL)
-		{
-		lp= &(t[n2]);
-		c1= (int)(bn_add_words(lp,&(t[n2+n]),&(l[0]),n));
-		}
-	else
-		{
-		lp= &(t[n2+n]);
-		c1=0;
-		}
-	c1+=(int)(bn_add_words(&(t[n2]),lp,  &(r[0]),n));
-	if (oneg)
-		c1-=(int)(bn_sub_words(&(t[n2]),&(t[n2]),&(t[0]),n));
-	else
-		c1+=(int)(bn_add_words(&(t[n2]),&(t[n2]),&(t[0]),n));
-
-	c2 =(int)(bn_add_words(&(r[0]),&(r[0]),&(t[n2+n]),n));
-	c2+=(int)(bn_add_words(&(r[0]),&(r[0]),&(r[n]),n));
-	if (oneg)
-		c2-=(int)(bn_sub_words(&(r[0]),&(r[0]),&(t[n]),n));
-	else
-		c2+=(int)(bn_add_words(&(r[0]),&(r[0]),&(t[n]),n));
-	
-	if (c1 != 0) /* Add starting at r[0], could be +ve or -ve */
-		{
-		i=0;
-		if (c1 > 0)
-			{
-			lc=c1;
-			do	{
-				ll=(r[i]+lc)&BN_MASK2;
-				r[i++]=ll;
-				lc=(lc > ll);
-				} while (lc);
-			}
-		else
-			{
-			lc= -c1;
-			do	{
-				ll=r[i];
-				r[i++]=(ll-lc)&BN_MASK2;
-				lc=(lc > ll);
-				} while (lc);
-			}
-		}
-	if (c2 != 0) /* Add starting at r[1] */
-		{
-		i=n;
-		if (c2 > 0)
-			{
-			lc=c2;
-			do	{
-				ll=(r[i]+lc)&BN_MASK2;
-				r[i++]=ll;
-				lc=(lc > ll);
-				} while (lc);
-			}
-		else
-			{
-			lc= -c2;
-			do	{
-				ll=r[i];
-				r[i++]=(ll-lc)&BN_MASK2;
-				lc=(lc > ll);
-				} while (lc);
-			}
-		}
-	}
-#endif /* BN_RECURSION */
-
-int BN_mul(BIGNUM *r, const BIGNUM *a, const BIGNUM *b, BN_CTX *ctx)
-	{
-	int ret=0;
-	int top,al,bl;
-	BIGNUM *rr;
-#if defined(BN_MUL_COMBA) || defined(BN_RECURSION)
-	int i;
-#endif
-#ifdef BN_RECURSION
-	BIGNUM *t=NULL;
-	int j=0,k;
-#endif
-
-#ifdef BN_COUNT
-	fprintf(stderr,"BN_mul %d * %d\n",a->top,b->top);
-#endif
-
-	bn_check_top(a);
-	bn_check_top(b);
-	bn_check_top(r);
-
-	al=a->top;
-	bl=b->top;
-
-	if ((al == 0) || (bl == 0))
-		{
-		BN_zero(r);
-		return(1);
-		}
-	top=al+bl;
-
-	BN_CTX_start(ctx);
-	if ((r == a) || (r == b))
-		{
-		if ((rr = BN_CTX_get(ctx)) == NULL) goto err;
-		}
-	else
-		rr = r;
-	rr->neg=a->neg^b->neg;
-
-#if defined(BN_MUL_COMBA) || defined(BN_RECURSION)
-	i = al-bl;
-#endif
-#ifdef BN_MUL_COMBA
-	if (i == 0)
-		{
-# if 0
-		if (al == 4)
-			{
-			if (bn_wexpand(rr,8) == NULL) goto err;
-			rr->top=8;
-			bn_mul_comba4(rr->d,a->d,b->d);
-			goto end;
-			}
-# endif
-		if (al == 8)
-			{
-			if (bn_wexpand(rr,16) == NULL) goto err;
-			rr->top=16;
-			bn_mul_comba8(rr->d,a->d,b->d);
-			goto end;
-			}
-		}
-#endif /* BN_MUL_COMBA */
-#ifdef BN_RECURSION
-	if ((al >= BN_MULL_SIZE_NORMAL) && (bl >= BN_MULL_SIZE_NORMAL))
-		{
-		if (i >= -1 && i <= 1)
-			{
-			int sav_j =0;
-			/* Find out the power of two lower or equal
-			   to the longest of the two numbers */
-			if (i >= 0)
-				{
-				j = BN_num_bits_word((BN_ULONG)al);
-				}
-			if (i == -1)
-				{
-				j = BN_num_bits_word((BN_ULONG)bl);
-				}
-			sav_j = j;
-			j = 1<<(j-1);
-			assert(j <= al || j <= bl);
-			k = j+j;
-			t = BN_CTX_get(ctx);
-			if (al > j || bl > j)
-				{
-				bn_wexpand(t,k*4);
-				bn_wexpand(rr,k*4);
-				bn_mul_part_recursive(rr->d,a->d,b->d,
-					j,al-j,bl-j,t->d);
-				}
-			else	/* al <= j || bl <= j */
-				{
-				bn_wexpand(t,k*2);
-				bn_wexpand(rr,k*2);
-				bn_mul_recursive(rr->d,a->d,b->d,
-					j,al-j,bl-j,t->d);
-				}
-			rr->top=top;
-			goto end;
-			}
-#if 0
-		if (i == 1 && !BN_get_flags(b,BN_FLG_STATIC_DATA))
-			{
-			BIGNUM *tmp_bn = (BIGNUM *)b;
-			if (bn_wexpand(tmp_bn,al) == NULL) goto err;
-			tmp_bn->d[bl]=0;
-			bl++;
-			i--;
-			}
-		else if (i == -1 && !BN_get_flags(a,BN_FLG_STATIC_DATA))
-			{
-			BIGNUM *tmp_bn = (BIGNUM *)a;
-			if (bn_wexpand(tmp_bn,bl) == NULL) goto err;
-			tmp_bn->d[al]=0;
-			al++;
-			i++;
-			}
-		if (i == 0)
-			{
-			/* symmetric and > 4 */
-			/* 16 or larger */
-			j=BN_num_bits_word((BN_ULONG)al);
-			j=1<<(j-1);
-			k=j+j;
-			t = BN_CTX_get(ctx);
-			if (al == j) /* exact multiple */
-				{
-				if (bn_wexpand(t,k*2) == NULL) goto err;
-				if (bn_wexpand(rr,k*2) == NULL) goto err;
-				bn_mul_recursive(rr->d,a->d,b->d,al,t->d);
-				}
-			else
-				{
-				if (bn_wexpand(t,k*4) == NULL) goto err;
-				if (bn_wexpand(rr,k*4) == NULL) goto err;
-				bn_mul_part_recursive(rr->d,a->d,b->d,al-j,j,t->d);
-				}
-			rr->top=top;
-			goto end;
-			}
-#endif
-		}
-#endif /* BN_RECURSION */
-	if (bn_wexpand(rr,top) == NULL) goto err;
-	rr->top=top;
-	bn_mul_normal(rr->d,a->d,al,b->d,bl);
-
-#if defined(BN_MUL_COMBA) || defined(BN_RECURSION)
-end:
-#endif
-	bn_correct_top(rr);
-	if (r != rr) BN_copy(r,rr);
-	ret=1;
-err:
-	bn_check_top(r);
-	BN_CTX_end(ctx);
-	return(ret);
-	}
-
-void bn_mul_normal(BN_ULONG *r, BN_ULONG *a, int na, BN_ULONG *b, int nb)
-	{
-	BN_ULONG *rr;
-
-#ifdef BN_COUNT
-	fprintf(stderr," bn_mul_normal %d * %d\n",na,nb);
-#endif
-
-	if (na < nb)
-		{
-		int itmp;
-		BN_ULONG *ltmp;
-
-		itmp=na; na=nb; nb=itmp;
-		ltmp=a;   a=b;   b=ltmp;
-
-		}
-	rr= &(r[na]);
-	if (nb <= 0)
-		{
-		(void)bn_mul_words(r,a,na,0);
-		return;
-		}
-	else
-		rr[0]=bn_mul_words(r,a,na,b[0]);
-
-	for (;;)
-		{
-		if (--nb <= 0) return;
-		rr[1]=bn_mul_add_words(&(r[1]),a,na,b[1]);
-		if (--nb <= 0) return;
-		rr[2]=bn_mul_add_words(&(r[2]),a,na,b[2]);
-		if (--nb <= 0) return;
-		rr[3]=bn_mul_add_words(&(r[3]),a,na,b[3]);
-		if (--nb <= 0) return;
-		rr[4]=bn_mul_add_words(&(r[4]),a,na,b[4]);
-		rr+=4;
-		r+=4;
-		b+=4;
-		}
-	}
-
-void bn_mul_low_normal(BN_ULONG *r, BN_ULONG *a, BN_ULONG *b, int n)
-	{
-#ifdef BN_COUNT
-	fprintf(stderr," bn_mul_low_normal %d * %d\n",n,n);
-#endif
-	bn_mul_words(r,a,n,b[0]);
-
-	for (;;)
-		{
-		if (--n <= 0) return;
-		bn_mul_add_words(&(r[1]),a,n,b[1]);
-		if (--n <= 0) return;
-		bn_mul_add_words(&(r[2]),a,n,b[2]);
-		if (--n <= 0) return;
-		bn_mul_add_words(&(r[3]),a,n,b[3]);
-		if (--n <= 0) return;
-		bn_mul_add_words(&(r[4]),a,n,b[4]);
-		r+=4;
-		b+=4;
-		}
-	}
diff --git a/crypto/openssl/crypto/bn/bn_nist.c b/crypto/openssl/crypto/bn/bn_nist.c
deleted file mode 100644
index f8e306bb82d3..000000000000
--- a/crypto/openssl/crypto/bn/bn_nist.c
+++ /dev/null
@@ -1,775 +0,0 @@
-/* crypto/bn/bn_nist.c */
-/*
- * Written by Nils Larsch for the OpenSSL project
- */
-/* ====================================================================
- * Copyright (c) 1998-2005 The OpenSSL Project.  All rights reserved.
- *
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions
- * are met:
- *
- * 1. Redistributions of source code must retain the above copyright
- *    notice, this list of conditions and the following disclaimer. 
- *
- * 2. Redistributions in binary form must reproduce the above copyright
- *    notice, this list of conditions and the following disclaimer in
- *    the documentation and/or other materials provided with the
- *    distribution.
- *
- * 3. All advertising materials mentioning features or use of this
- *    software must display the following acknowledgment:
- *    "This product includes software developed by the OpenSSL Project
- *    for use in the OpenSSL Toolkit. (http://www.openssl.org/)"
- *
- * 4. The names "OpenSSL Toolkit" and "OpenSSL Project" must not be used to
- *    endorse or promote products derived from this software without
- *    prior written permission. For written permission, please contact
- *    openssl-core@openssl.org.
- *
- * 5. Products derived from this software may not be called "OpenSSL"
- *    nor may "OpenSSL" appear in their names without prior written
- *    permission of the OpenSSL Project.
- *
- * 6. Redistributions of any form whatsoever must retain the following
- *    acknowledgment:
- *    "This product includes software developed by the OpenSSL Project
- *    for use in the OpenSSL Toolkit (http://www.openssl.org/)"
- *
- * THIS SOFTWARE IS PROVIDED BY THE OpenSSL PROJECT ``AS IS'' AND ANY
- * EXPRESSED OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
- * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR
- * PURPOSE ARE DISCLAIMED.  IN NO EVENT SHALL THE OpenSSL PROJECT OR
- * ITS CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
- * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
- * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
- * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
- * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
- * STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
- * ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED
- * OF THE POSSIBILITY OF SUCH DAMAGE.
- * ====================================================================
- *
- * This product includes cryptographic software written by Eric Young
- * (eay@cryptsoft.com).  This product includes software written by Tim
- * Hudson (tjh@cryptsoft.com).
- *
- */
-
-#include "bn_lcl.h"
-#include "cryptlib.h"
-
-#define BN_NIST_192_TOP	(192+BN_BITS2-1)/BN_BITS2
-#define BN_NIST_224_TOP	(224+BN_BITS2-1)/BN_BITS2
-#define BN_NIST_256_TOP	(256+BN_BITS2-1)/BN_BITS2
-#define BN_NIST_384_TOP	(384+BN_BITS2-1)/BN_BITS2
-#define BN_NIST_521_TOP	(521+BN_BITS2-1)/BN_BITS2
-
-#if BN_BITS2 == 64
-static const BN_ULONG _nist_p_192[] =
-	{0xFFFFFFFFFFFFFFFFULL,0xFFFFFFFFFFFFFFFEULL,
-	0xFFFFFFFFFFFFFFFFULL};
-static const BN_ULONG _nist_p_224[] =
-	{0x0000000000000001ULL,0xFFFFFFFF00000000ULL,
-	0xFFFFFFFFFFFFFFFFULL,0x00000000FFFFFFFFULL};
-static const BN_ULONG _nist_p_256[] =
-	{0xFFFFFFFFFFFFFFFFULL,0x00000000FFFFFFFFULL,
-	0x0000000000000000ULL,0xFFFFFFFF00000001ULL};
-static const BN_ULONG _nist_p_384[] =
-	{0x00000000FFFFFFFFULL,0xFFFFFFFF00000000ULL,
-	0xFFFFFFFFFFFFFFFEULL,0xFFFFFFFFFFFFFFFFULL,
-	0xFFFFFFFFFFFFFFFFULL,0xFFFFFFFFFFFFFFFFULL};
-static const BN_ULONG _nist_p_521[] =
-	{0xFFFFFFFFFFFFFFFFULL,0xFFFFFFFFFFFFFFFFULL,
-	0xFFFFFFFFFFFFFFFFULL,0xFFFFFFFFFFFFFFFFULL,
-	0xFFFFFFFFFFFFFFFFULL,0xFFFFFFFFFFFFFFFFULL,
-	0xFFFFFFFFFFFFFFFFULL,0xFFFFFFFFFFFFFFFFULL,
-	0x00000000000001FFULL};
-#elif BN_BITS2 == 32
-static const BN_ULONG _nist_p_192[] = {0xFFFFFFFF,0xFFFFFFFF,0xFFFFFFFE,
-	0xFFFFFFFF,0xFFFFFFFF,0xFFFFFFFF};
-static const BN_ULONG _nist_p_224[] = {0x00000001,0x00000000,0x00000000,
-	0xFFFFFFFF,0xFFFFFFFF,0xFFFFFFFF,0xFFFFFFFF};
-static const BN_ULONG _nist_p_256[] = {0xFFFFFFFF,0xFFFFFFFF,0xFFFFFFFF,
-	0x00000000,0x00000000,0x00000000,0x00000001,0xFFFFFFFF};
-static const BN_ULONG _nist_p_384[] = {0xFFFFFFFF,0x00000000,0x00000000,
-	0xFFFFFFFF,0xFFFFFFFE,0xFFFFFFFF,0xFFFFFFFF,0xFFFFFFFF,0xFFFFFFFF,
-	0xFFFFFFFF,0xFFFFFFFF,0xFFFFFFFF};
-static const BN_ULONG _nist_p_521[] = {0xFFFFFFFF,0xFFFFFFFF,0xFFFFFFFF,
-	0xFFFFFFFF,0xFFFFFFFF,0xFFFFFFFF,0xFFFFFFFF,0xFFFFFFFF,0xFFFFFFFF,
-	0xFFFFFFFF,0xFFFFFFFF,0xFFFFFFFF,0xFFFFFFFF,0xFFFFFFFF,0xFFFFFFFF,
-	0xFFFFFFFF,0x000001FF};
-#elif BN_BITS2 == 16
-static const BN_ULONG _nist_p_192[] = {0xFFFF,0xFFFF,0xFFFF,0xFFFF,0xFFFE,
-	0xFFFF,0xFFFF,0xFFFF,0xFFFF,0xFFFF,0xFFFF,0xFFFF};
-static const BN_ULONG _nist_p_224[] = {0x0001,0x0000,0x0000,0x0000,0x0000,
-	0x0000,0xFFFF,0xFFFF,0xFFFF,0xFFFF,0xFFFF,0xFFFF,0xFFFF,0xFFFF};
-static const BN_ULONG _nist_p_256[] = {0xFFFF,0xFFFF,0xFFFF,0xFFFF,0xFFFF,
-	0xFFFF,0x0000,0x0000,0x0000,0x0000,0x0000,0x0000,0x0001,0x0000,0xFFFF,
-	0xFFFF};
-static const BN_ULONG _nist_p_384[] = {0xFFFF,0xFFFF,0x0000,0x0000,0x0000,
-	0x0000,0xFFFF,0xFFFF,0xFFFE,0xFFFF,0xFFFF,0xFFFF,0xFFFF,0xFFFF,0xFFFF,
-	0xFFFF,0xFFFF,0xFFFF,0xFFFF,0xFFFF,0xFFFF,0xFFFF,0xFFFF,0xFFFF};
-static const BN_ULONG _nist_p_521[] = {0xFFFF,0xFFFF,0xFFFF,0xFFFF,0xFFFF,
-	0xFFFF,0xFFFF,0xFFFF,0xFFFF,0xFFFF,0xFFFF,0xFFFF,0xFFFF,0xFFFF,0xFFFF,
-	0xFFFF,0xFFFF,0xFFFF,0xFFFF,0xFFFF,0xFFFF,0xFFFF,0xFFFF,0xFFFF,0xFFFF,
-	0xFFFF,0xFFFF,0xFFFF,0xFFFF,0xFFFF,0xFFFF,0xFFFF,0x01FF};
-#elif BN_BITS2 == 8
-static const BN_ULONG _nist_p_192[] = {0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,
-	0xFE,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,
-	0xFF,0xFF};
-static const BN_ULONG _nist_p_224[] = {0x01,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
-	0x00,0x00,0x00,0x00,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,
-	0xFF,0xFF,0xFF,0xFF,0xFF,0xFF};
-static const BN_ULONG _nist_p_256[] = {0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,
-	0xFF,0xFF,0xFF,0xFF,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
-	0x00,0x00,0x01,0x00,0x00,0x00,0xFF,0xFF,0xFF,0xFF};
-static const BN_ULONG _nist_p_384[] = {0xFF,0xFF,0xFF,0xFF,0x00,0x00,0x00,0x00,
-	0x00,0x00,0x00,0x00,0xFF,0xFF,0xFF,0xFF,0xFE,0xFF,0xFF,0xFF,0xFF,0xFF,
-	0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,
-	0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF};
-static const BN_ULONG _nist_p_521[] = {0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,
-	0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,
-	0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,
-	0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,
-	0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,
-	0xFF,0x01};
-#endif
-
-const BIGNUM *BN_get0_nist_prime_192(void)
-	{
-	static BIGNUM const_nist_192 = { (BN_ULONG *)_nist_p_192,
-		BN_NIST_192_TOP, BN_NIST_192_TOP, 0, BN_FLG_STATIC_DATA };
-	return &const_nist_192;
-	}
-
-const BIGNUM *BN_get0_nist_prime_224(void)
-	{
-	static BIGNUM const_nist_224 = { (BN_ULONG *)_nist_p_224,
-		BN_NIST_224_TOP, BN_NIST_224_TOP, 0, BN_FLG_STATIC_DATA };
-	return &const_nist_224;
-	}
-
-const BIGNUM *BN_get0_nist_prime_256(void)
-	{
-	static BIGNUM const_nist_256 = { (BN_ULONG *)_nist_p_256,
-		BN_NIST_256_TOP, BN_NIST_256_TOP, 0, BN_FLG_STATIC_DATA };
-	return &const_nist_256;
-	}
-
-const BIGNUM *BN_get0_nist_prime_384(void)
-	{
-	static BIGNUM const_nist_384 = { (BN_ULONG *)_nist_p_384,
-		BN_NIST_384_TOP, BN_NIST_384_TOP, 0, BN_FLG_STATIC_DATA };
-	return &const_nist_384;
-	}
-
-const BIGNUM *BN_get0_nist_prime_521(void)
-	{
-	static BIGNUM const_nist_521 = { (BN_ULONG *)_nist_p_521,
-		BN_NIST_521_TOP, BN_NIST_521_TOP, 0, BN_FLG_STATIC_DATA };
-	return &const_nist_521;
-	}
-
-/* some misc internal functions */
-#if BN_BITS2 != 64
-static BN_ULONG _256_data[BN_NIST_256_TOP*6];
-static int _is_set_256_data = 0;
-static void _init_256_data(void);
-
-static BN_ULONG _384_data[BN_NIST_384_TOP*8];
-static int _is_set_384_data = 0;
-static void _init_384_data(void);
-#endif
-
-#define BN_NIST_ADD_ONE(a)	while (!(++(*(a)))) ++(a);
-
-static void nist_cp_bn_0(BN_ULONG *buf, BN_ULONG *a, int top, int max)
-        {
-	int i;
-        BN_ULONG *_tmp1 = (buf), *_tmp2 = (a);
-        for (i = (top); i != 0; i--)
-                *_tmp1++ = *_tmp2++;
-        for (i = (max) - (top); i != 0; i--)
-                *_tmp1++ = (BN_ULONG) 0;
-        }
-
-static void nist_cp_bn(BN_ULONG *buf, BN_ULONG *a, int top)
-        { 
-	int i;
-        BN_ULONG *_tmp1 = (buf), *_tmp2 = (a);
-        for (i = (top); i != 0; i--)
-                *_tmp1++ = *_tmp2++;
-        }
-
-#if BN_BITS2 == 64
-#define bn_cp_64(to, n, from, m)	(to)[n] = (from)[m];
-#define bn_64_set_0(to, n)		(to)[n] = (BN_ULONG)0;
-/* TBD */
-#define bn_cp_32(to, n, from, m)	(to)[n] = (from)[m];
-#define bn_32_set_0(to, n)		(to)[n] = (BN_ULONG)0;
-#else
-#define bn_cp_64(to, n, from, m) \
-	{ \
-	bn_cp_32(to, (n)*2, from, (m)*2); \
-	bn_cp_32(to, (n)*2+1, from, (m)*2+1); \
-	}
-#define bn_64_set_0(to, n) \
-	{ \
-	bn_32_set_0(to, (n)*2); \
-	bn_32_set_0(to, (n)*2+1); \
-	}
-#if BN_BITS2 == 32
-#define bn_cp_32(to, n, from, m)	(to)[n] = (from)[m];
-#define bn_32_set_0(to, n)		(to)[n] = (BN_ULONG)0;
-#elif BN_BITS2 == 16
-#define bn_cp_32(to, n, from, m) \
-	{ \
-	(to)[(n)*2]   = (from)[(m)*2];  \
-	(to)[(n)*2+1] = (from)[(m)*2+1];\
-	}
-#define bn_32_set_0(to, n) { (to)[(n)*2] = 0; (to)[(n)*2+1] = 0; }
-#elif BN_BITS2 == 8
-#define bn_cp_32(to, n, from, m) \
-	{ \
-	(to)[(n)*4]   = (from)[(m)*4];  \
-	(to)[(n)*4+1] = (from)[(m)*4+1];\
-	(to)[(n)*4+2] = (from)[(m)*4+2];\
-	(to)[(n)*4+3] = (from)[(m)*4+3];\
-	}
-#define bn_32_set_0(to, n) \
-	{ (to)[(n)*4]   = (BN_ULONG)0; (to)[(n)*4+1] = (BN_ULONG)0; \
-	  (to)[(n)*4+2] = (BN_ULONG)0; (to)[(n)*4+3] = (BN_ULONG)0; }
-#endif
-#endif /* BN_BITS2 != 64 */
-
-
-#define nist_set_192(to, from, a1, a2, a3) \
-	{ \
-	if (a3 != 0) bn_cp_64(to, 0, from, (a3) - 3) else bn_64_set_0(to, 0)\
-	bn_cp_64(to, 1, from, (a2) - 3) \
-	if (a1 != 0) bn_cp_64(to, 2, from, (a1) - 3) else bn_64_set_0(to, 2)\
-	}
-
-int BN_nist_mod_192(BIGNUM *r, const BIGNUM *a, const BIGNUM *field,
-	BN_CTX *ctx)
-	{
-	int      top = a->top, i;
-	BN_ULONG carry = 0;
-	register BN_ULONG *r_d, *a_d = a->d;
-	BN_ULONG t_d[BN_NIST_192_TOP],
-	         buf[BN_NIST_192_TOP];
-
-	i = BN_ucmp(field, a);
-	if (i == 0)
-		{
-		BN_zero(r);
-		return 1;
-		}
-	else if (i > 0)
-		return (r == a) ? 1 : (BN_copy(r ,a) != NULL);
-
-	if (top == BN_NIST_192_TOP)
-		return BN_usub(r, a, field);
-
-	if (r != a)
-		{
-		if (!bn_wexpand(r, BN_NIST_192_TOP))
-			return 0;
-		r_d = r->d;
-		nist_cp_bn(r_d, a_d, BN_NIST_192_TOP);
-		}
-	else
-		r_d = a_d;
-
-	nist_cp_bn_0(buf, a_d + BN_NIST_192_TOP, top - BN_NIST_192_TOP, BN_NIST_192_TOP);
-
-#if defined(OPENSSL_SYS_VMS) && defined(__DECC)
-# pragma message save
-# pragma message disable BADSUBSCRIPT
-#endif
-
-	nist_set_192(t_d, buf, 0, 3, 3);
-	if (bn_add_words(r_d, r_d, t_d, BN_NIST_192_TOP))
-		++carry;
-
-	nist_set_192(t_d, buf, 4, 4, 0);
-	if (bn_add_words(r_d, r_d, t_d, BN_NIST_192_TOP))
-		++carry;
-
-#if defined(OPENSSL_SYS_VMS) && defined(__DECC)
-# pragma message restore
-#endif
-
-	nist_set_192(t_d, buf, 5, 5, 5)
-	if (bn_add_words(r_d, r_d, t_d, BN_NIST_192_TOP))
-		++carry;
-
-	while (carry)
-		{
-		if (bn_sub_words(r_d, r_d, _nist_p_192, BN_NIST_192_TOP))
-			--carry; 
-		}
-	r->top = BN_NIST_192_TOP;
-	bn_correct_top(r);
-	if (BN_ucmp(r, field) >= 0)
-		{
-		bn_sub_words(r_d, r_d, _nist_p_192, BN_NIST_192_TOP);
-		bn_correct_top(r);
-		}
-
-	bn_check_top(r);
-	return 1;
-	}
-
-#define nist_set_224(to, from, a1, a2, a3, a4, a5, a6, a7) \
-	{ \
-	if (a7 != 0) bn_cp_32(to, 0, from, (a7) - 7) else bn_32_set_0(to, 0)\
-	if (a6 != 0) bn_cp_32(to, 1, from, (a6) - 7) else bn_32_set_0(to, 1)\
-	if (a5 != 0) bn_cp_32(to, 2, from, (a5) - 7) else bn_32_set_0(to, 2)\
-	if (a4 != 0) bn_cp_32(to, 3, from, (a4) - 7) else bn_32_set_0(to, 3)\
-	if (a3 != 0) bn_cp_32(to, 4, from, (a3) - 7) else bn_32_set_0(to, 4)\
-	if (a2 != 0) bn_cp_32(to, 5, from, (a2) - 7) else bn_32_set_0(to, 5)\
-	if (a1 != 0) bn_cp_32(to, 6, from, (a1) - 7) else bn_32_set_0(to, 6)\
-	}
-
-int BN_nist_mod_224(BIGNUM *r, const BIGNUM *a, const BIGNUM *field,
-	BN_CTX *ctx)
-	{
-#if BN_BITS2 != 64
-	int	top = a->top, i;
-	int	carry = 0;
-	BN_ULONG *r_d, *a_d = a->d;
-	BN_ULONG t_d[BN_NIST_224_TOP],
-	         buf[BN_NIST_224_TOP];
-
-	i = BN_ucmp(field, a);
-	if (i == 0)
-		{
-		BN_zero(r);
-		return 1;
-		}
-	else if (i > 0)
-		return (r == a)? 1 : (BN_copy(r ,a) != NULL);
-
-	if (top == BN_NIST_224_TOP)
-		return BN_usub(r, a, field);
-
-	if (r != a)
-		{
-		if (!bn_wexpand(r, BN_NIST_224_TOP))
-			return 0;
-		r_d = r->d;
-		nist_cp_bn(r_d, a_d, BN_NIST_224_TOP);
-		}
-	else
-		r_d = a_d;
-
-	nist_cp_bn_0(buf, a_d + BN_NIST_224_TOP, top - BN_NIST_224_TOP, BN_NIST_224_TOP);
-
-	nist_set_224(t_d, buf, 10, 9, 8, 7, 0, 0, 0);
-	if (bn_add_words(r_d, r_d, t_d, BN_NIST_224_TOP))
-		++carry;
-	nist_set_224(t_d, buf, 0, 13, 12, 11, 0, 0, 0);
-	if (bn_add_words(r_d, r_d, t_d, BN_NIST_224_TOP))
-		++carry;
-	nist_set_224(t_d, buf, 13, 12, 11, 10, 9, 8, 7);
-	if (bn_sub_words(r_d, r_d, t_d, BN_NIST_224_TOP))
-		--carry;
-	nist_set_224(t_d, buf, 0, 0, 0, 0, 13, 12, 11);
-	if (bn_sub_words(r_d, r_d, t_d, BN_NIST_224_TOP))
-		--carry;
-
-	if (carry > 0)
-		while (carry)
-			{
-			if (bn_sub_words(r_d,r_d,_nist_p_224,BN_NIST_224_TOP))
-				--carry;
-			}
-	else if (carry < 0)
-		while (carry)
-			{
-			if (bn_add_words(r_d,r_d,_nist_p_224,BN_NIST_224_TOP))
-				++carry;
-			}
-
-	r->top = BN_NIST_224_TOP;
-	bn_correct_top(r);
-	if (BN_ucmp(r, field) >= 0)
-		{
-		bn_sub_words(r_d, r_d, _nist_p_224, BN_NIST_224_TOP);
-		bn_correct_top(r);
-		}
-	bn_check_top(r);
-	return 1;
-#else
-	return 0;
-#endif
-	}
-
-#if BN_BITS2 != 64
-static void _init_256_data(void)
-	{
-	int	i;
-	BN_ULONG *tmp1 = _256_data;
-	const BN_ULONG *tmp2 = tmp1;
-
-	memcpy(tmp1, _nist_p_256, BN_NIST_256_TOP * sizeof(BN_ULONG));
-	tmp1 += BN_NIST_256_TOP;
-
-	for (i=0; i<5; i++)
-		{
-		bn_add_words(tmp1, _nist_p_256, tmp2, BN_NIST_256_TOP);
-		tmp2  = tmp1;
-		tmp1 += BN_NIST_256_TOP;
-		}
-	_is_set_256_data = 1;
-	}
-#endif
-
-#define nist_set_256(to, from, a1, a2, a3, a4, a5, a6, a7, a8) \
-	{ \
-	if (a8 != 0) bn_cp_32(to, 0, from, (a8) - 8) else bn_32_set_0(to, 0)\
-	if (a7 != 0) bn_cp_32(to, 1, from, (a7) - 8) else bn_32_set_0(to, 1)\
-	if (a6 != 0) bn_cp_32(to, 2, from, (a6) - 8) else bn_32_set_0(to, 2)\
-	if (a5 != 0) bn_cp_32(to, 3, from, (a5) - 8) else bn_32_set_0(to, 3)\
-	if (a4 != 0) bn_cp_32(to, 4, from, (a4) - 8) else bn_32_set_0(to, 4)\
-	if (a3 != 0) bn_cp_32(to, 5, from, (a3) - 8) else bn_32_set_0(to, 5)\
-	if (a2 != 0) bn_cp_32(to, 6, from, (a2) - 8) else bn_32_set_0(to, 6)\
-	if (a1 != 0) bn_cp_32(to, 7, from, (a1) - 8) else bn_32_set_0(to, 7)\
-	}
-
-int BN_nist_mod_256(BIGNUM *r, const BIGNUM *a, const BIGNUM *field,
-	BN_CTX *ctx)
-	{
-#if BN_BITS2 != 64
-	int	i, top = a->top;
-	int	carry = 0;
-	register BN_ULONG *a_d = a->d, *r_d;
-	BN_ULONG t_d[BN_NIST_256_TOP],
-	         t_d2[BN_NIST_256_TOP],
-	         buf[BN_NIST_256_TOP];
-
-	if (!_is_set_256_data)
-		{
-		CRYPTO_w_lock(CRYPTO_LOCK_BN);
-		
-		if (!_is_set_256_data)
-			_init_256_data();
-		
-		CRYPTO_w_unlock(CRYPTO_LOCK_BN);
-		}
-	
-	i = BN_ucmp(field, a);
-	if (i == 0)
-		{
-		BN_zero(r);
-		return 1;
-		}
-	else if (i > 0)
-		return (r == a)? 1 : (BN_copy(r ,a) != NULL);
-
-	if (top == BN_NIST_256_TOP)
-		return BN_usub(r, a, field);
-
-	if (r != a)
-		{
-		if (!bn_wexpand(r, BN_NIST_256_TOP))
-			return 0;
-		r_d = r->d;
-		nist_cp_bn(r_d, a_d, BN_NIST_256_TOP);
-		}
-	else
-		r_d = a_d;
-
-	nist_cp_bn_0(buf, a_d + BN_NIST_256_TOP, top - BN_NIST_256_TOP, BN_NIST_256_TOP);
-
-	/*S1*/
-	nist_set_256(t_d, buf, 15, 14, 13, 12, 11, 0, 0, 0);
-	/*S2*/
-	nist_set_256(t_d2,buf, 0, 15, 14, 13, 12, 0, 0, 0);
-	if (bn_add_words(t_d, t_d, t_d2, BN_NIST_256_TOP))
-		carry = 2;
-	/* left shift */
-		{
-		register BN_ULONG *ap,t,c;
-		ap = t_d;
-		c=0;
-		for (i = BN_NIST_256_TOP; i != 0; --i)
-			{
-			t= *ap;
-			*(ap++)=((t<<1)|c)&BN_MASK2;
-			c=(t & BN_TBIT)?1:0;
-			}
-		if (c)
-			++carry;
-		}
-
-	if (bn_add_words(r_d, r_d, t_d, BN_NIST_256_TOP))
-		++carry;
-	/*S3*/
-	nist_set_256(t_d, buf, 15, 14, 0, 0, 0, 10, 9, 8);
-	if (bn_add_words(r_d, r_d, t_d, BN_NIST_256_TOP))
-		++carry;
-	/*S4*/
-	nist_set_256(t_d, buf, 8, 13, 15, 14, 13, 11, 10, 9);
-	if (bn_add_words(r_d, r_d, t_d, BN_NIST_256_TOP))
-		++carry;
-	/*D1*/
-	nist_set_256(t_d, buf, 10, 8, 0, 0, 0, 13, 12, 11);
-	if (bn_sub_words(r_d, r_d, t_d, BN_NIST_256_TOP))
-		--carry;
-	/*D2*/
-	nist_set_256(t_d, buf, 11, 9, 0, 0, 15, 14, 13, 12);
-	if (bn_sub_words(r_d, r_d, t_d, BN_NIST_256_TOP))
-		--carry;
-	/*D3*/
-	nist_set_256(t_d, buf, 12, 0, 10, 9, 8, 15, 14, 13);
-	if (bn_sub_words(r_d, r_d, t_d, BN_NIST_256_TOP))
-		--carry;
-	/*D4*/
-	nist_set_256(t_d, buf, 13, 0, 11, 10, 9, 0, 15, 14);
-	if (bn_sub_words(r_d, r_d, t_d, BN_NIST_256_TOP))
-		--carry;
-	
-	if (carry)
-		{
-		if (carry > 0)
-			bn_sub_words(r_d, r_d, _256_data + BN_NIST_256_TOP *
-				--carry, BN_NIST_256_TOP);
-		else
-			{
-			carry = -carry;
-			bn_add_words(r_d, r_d, _256_data + BN_NIST_256_TOP *
-				--carry, BN_NIST_256_TOP);
-			}
-		}
-
-	r->top = BN_NIST_256_TOP;
-	bn_correct_top(r);
-	if (BN_ucmp(r, field) >= 0)
-		{
-		bn_sub_words(r_d, r_d, _nist_p_256, BN_NIST_256_TOP);
-		bn_correct_top(r);
-		}
-	bn_check_top(r);
-	return 1;
-#else
-	return 0;
-#endif
-	}
-
-#if BN_BITS2 != 64
-static void _init_384_data(void)
-	{
-	int	i;
-	BN_ULONG *tmp1 = _384_data;
-	const BN_ULONG *tmp2 = tmp1;
-
-	memcpy(tmp1, _nist_p_384, BN_NIST_384_TOP * sizeof(BN_ULONG));
-	tmp1 += BN_NIST_384_TOP;
-
-	for (i=0; i<7; i++)
-		{
-		bn_add_words(tmp1, _nist_p_384, tmp2, BN_NIST_384_TOP);
-		tmp2  = tmp1;
-		tmp1 += BN_NIST_384_TOP;
-		}
-	_is_set_384_data = 1;
-	}
-#endif
-
-#define nist_set_384(to,from,a1,a2,a3,a4,a5,a6,a7,a8,a9,a10,a11,a12) \
-	{ \
-	if (a12 != 0) bn_cp_32(to, 0, from,  (a12) - 12) else bn_32_set_0(to, 0)\
-	if (a11 != 0) bn_cp_32(to, 1, from,  (a11) - 12) else bn_32_set_0(to, 1)\
-	if (a10 != 0) bn_cp_32(to, 2, from,  (a10) - 12) else bn_32_set_0(to, 2)\
-	if (a9 != 0)  bn_cp_32(to, 3, from,  (a9) - 12)  else bn_32_set_0(to, 3)\
-	if (a8 != 0)  bn_cp_32(to, 4, from,  (a8) - 12)  else bn_32_set_0(to, 4)\
-	if (a7 != 0)  bn_cp_32(to, 5, from,  (a7) - 12)  else bn_32_set_0(to, 5)\
-	if (a6 != 0)  bn_cp_32(to, 6, from,  (a6) - 12)  else bn_32_set_0(to, 6)\
-	if (a5 != 0)  bn_cp_32(to, 7, from,  (a5) - 12)  else bn_32_set_0(to, 7)\
-	if (a4 != 0)  bn_cp_32(to, 8, from,  (a4) - 12)  else bn_32_set_0(to, 8)\
-	if (a3 != 0)  bn_cp_32(to, 9, from,  (a3) - 12)  else bn_32_set_0(to, 9)\
-	if (a2 != 0)  bn_cp_32(to, 10, from, (a2) - 12)  else bn_32_set_0(to, 10)\
-	if (a1 != 0)  bn_cp_32(to, 11, from, (a1) - 12)  else bn_32_set_0(to, 11)\
-	}
-
-int BN_nist_mod_384(BIGNUM *r, const BIGNUM *a, const BIGNUM *field,
-	BN_CTX *ctx)
-	{
-#if BN_BITS2 != 64
-	int	i, top = a->top;
-	int	carry = 0;
-	register BN_ULONG *r_d, *a_d = a->d;
-	BN_ULONG t_d[BN_NIST_384_TOP],
-	         buf[BN_NIST_384_TOP];
-
-	if (!_is_set_384_data)
-		{
-		CRYPTO_w_lock(CRYPTO_LOCK_BN);
-		
-		if (!_is_set_384_data)
-			_init_384_data();
-
-		CRYPTO_w_unlock(CRYPTO_LOCK_BN);
-		}
-
-	i = BN_ucmp(field, a);
-	if (i == 0)
-		{
-		BN_zero(r);
-		return 1;
-		}
-	else if (i > 0)
-		return (r == a)? 1 : (BN_copy(r ,a) != NULL);
-
-	if (top == BN_NIST_384_TOP)
-		return BN_usub(r, a, field);
-
-	if (r != a)
-		{
-		if (!bn_wexpand(r, BN_NIST_384_TOP))
-			return 0;
-		r_d = r->d;
-		nist_cp_bn(r_d, a_d, BN_NIST_384_TOP);
-		}
-	else
-		r_d = a_d;
-
-	nist_cp_bn_0(buf, a_d + BN_NIST_384_TOP, top - BN_NIST_384_TOP, BN_NIST_384_TOP);
-
-	/*S1*/
-	nist_set_256(t_d, buf, 0, 0, 0, 0, 0, 23-4, 22-4, 21-4);
-		/* left shift */
-		{
-		register BN_ULONG *ap,t,c;
-		ap = t_d;
-		c=0;
-		for (i = BN_NIST_256_TOP; i != 0; --i)
-			{
-			t= *ap;
-			*(ap++)=((t<<1)|c)&BN_MASK2;
-			c=(t & BN_TBIT)?1:0;
-			}
-		}
-	if (bn_add_words(r_d+(128/BN_BITS2), r_d+(128/BN_BITS2), 
-		t_d, BN_NIST_256_TOP))
-		++carry;
-	/*S2 */
-	if (bn_add_words(r_d, r_d, buf, BN_NIST_384_TOP))
-		++carry;
-	/*S3*/
-	nist_set_384(t_d,buf,20,19,18,17,16,15,14,13,12,23,22,21);
-	if (bn_add_words(r_d, r_d, t_d, BN_NIST_384_TOP))
-		++carry;
-	/*S4*/
-	nist_set_384(t_d,buf,19,18,17,16,15,14,13,12,20,0,23,0);
-	if (bn_add_words(r_d, r_d, t_d, BN_NIST_384_TOP))
-		++carry;
-	/*S5*/
-	nist_set_256(t_d, buf, 0, 0, 0, 0, 23-4, 22-4, 21-4, 20-4);
-	if (bn_add_words(r_d+(128/BN_BITS2), r_d+(128/BN_BITS2), 
-		t_d, BN_NIST_256_TOP))
-		++carry;
-	/*S6*/
-	nist_set_384(t_d,buf,0,0,0,0,0,0,23,22,21,0,0,20);
-	if (bn_add_words(r_d, r_d, t_d, BN_NIST_384_TOP))
-		++carry;
-	/*D1*/
-	nist_set_384(t_d,buf,22,21,20,19,18,17,16,15,14,13,12,23);
-	if (bn_sub_words(r_d, r_d, t_d, BN_NIST_384_TOP))
-		--carry;
-	/*D2*/
-	nist_set_384(t_d,buf,0,0,0,0,0,0,0,23,22,21,20,0);
-	if (bn_sub_words(r_d, r_d, t_d, BN_NIST_384_TOP))
-		--carry;
-	/*D3*/
-	nist_set_384(t_d,buf,0,0,0,0,0,0,0,23,23,0,0,0);
-	if (bn_sub_words(r_d, r_d, t_d, BN_NIST_384_TOP))
-		--carry;
-	
-	if (carry)
-		{
-		if (carry > 0)
-			bn_sub_words(r_d, r_d, _384_data + BN_NIST_384_TOP *
-				--carry, BN_NIST_384_TOP);
-		else
-			{
-			carry = -carry;
-			bn_add_words(r_d, r_d, _384_data + BN_NIST_384_TOP *
-				--carry, BN_NIST_384_TOP);
-			}
-		}
-
-	r->top = BN_NIST_384_TOP;
-	bn_correct_top(r);
-	if (BN_ucmp(r, field) >= 0)
-		{
-		bn_sub_words(r_d, r_d, _nist_p_384, BN_NIST_384_TOP);
-		bn_correct_top(r);
-		}
-	bn_check_top(r);
-	return 1;
-#else
-	return 0;
-#endif
-	}
-
-int BN_nist_mod_521(BIGNUM *r, const BIGNUM *a, const BIGNUM *field,
-	BN_CTX *ctx)
-	{
-#if BN_BITS2 == 64
-#define BN_NIST_521_TOP_MASK	(BN_ULONG)0x1FF
-#elif BN_BITS2 == 32
-#define BN_NIST_521_TOP_MASK	(BN_ULONG)0x1FF
-#elif BN_BITS2 == 16
-#define BN_NIST_521_TOP_MASK	(BN_ULONG)0x1FF
-#elif BN_BITS2 == 8
-#define BN_NIST_521_TOP_MASK	(BN_ULONG)0x1
-#endif
-	int	top, ret = 0;
-	BN_ULONG *r_d;
-	BIGNUM	*tmp;
-
-	/* check whether a reduction is necessary */
-	top = a->top;
-	if (top < BN_NIST_521_TOP  || ( top == BN_NIST_521_TOP &&
-           (!(a->d[BN_NIST_521_TOP-1] & ~(BN_NIST_521_TOP_MASK)))))
-		return (r == a)? 1 : (BN_copy(r ,a) != NULL);
-
-	BN_CTX_start(ctx);
-	tmp = BN_CTX_get(ctx);
-	if (!tmp)
-		goto err;
-
-	if (!bn_wexpand(tmp, BN_NIST_521_TOP))
-		goto err;
-	nist_cp_bn(tmp->d, a->d, BN_NIST_521_TOP);
-
-	tmp->top = BN_NIST_521_TOP;
-        tmp->d[BN_NIST_521_TOP-1]  &= BN_NIST_521_TOP_MASK;
-	bn_correct_top(tmp);
-
-	if (!BN_rshift(r, a, 521))
-		goto err;
-
-	if (!BN_uadd(r, tmp, r))
-		goto err;
-	top = r->top;
-	r_d = r->d;
-	if (top == BN_NIST_521_TOP  && 
-           (r_d[BN_NIST_521_TOP-1] & ~(BN_NIST_521_TOP_MASK)))
-		{
-		BN_NIST_ADD_ONE(r_d)
-		r_d[BN_NIST_521_TOP-1] &= BN_NIST_521_TOP_MASK; 
-		}
-	bn_correct_top(r);
-
-	ret = 1;
-err:
-	BN_CTX_end(ctx);
-
-	bn_check_top(r);
-	return ret;
-	}
diff --git a/crypto/openssl/crypto/bn/bn_prime.c b/crypto/openssl/crypto/bn/bn_prime.c
deleted file mode 100644
index 5bab019553bf..000000000000
--- a/crypto/openssl/crypto/bn/bn_prime.c
+++ /dev/null
@@ -1,494 +0,0 @@
-/* crypto/bn/bn_prime.c */
-/* Copyright (C) 1995-1998 Eric Young (eay@cryptsoft.com)
- * All rights reserved.
- *
- * This package is an SSL implementation written
- * by Eric Young (eay@cryptsoft.com).
- * The implementation was written so as to conform with Netscapes SSL.
- * 
- * This library is free for commercial and non-commercial use as long as
- * the following conditions are aheared to.  The following conditions
- * apply to all code found in this distribution, be it the RC4, RSA,
- * lhash, DES, etc., code; not just the SSL code.  The SSL documentation
- * included with this distribution is covered by the same copyright terms
- * except that the holder is Tim Hudson (tjh@cryptsoft.com).
- * 
- * Copyright remains Eric Young's, and as such any Copyright notices in
- * the code are not to be removed.
- * If this package is used in a product, Eric Young should be given attribution
- * as the author of the parts of the library used.
- * This can be in the form of a textual message at program startup or
- * in documentation (online or textual) provided with the package.
- * 
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions
- * are met:
- * 1. Redistributions of source code must retain the copyright
- *    notice, this list of conditions and the following disclaimer.
- * 2. Redistributions in binary form must reproduce the above copyright
- *    notice, this list of conditions and the following disclaimer in the
- *    documentation and/or other materials provided with the distribution.
- * 3. All advertising materials mentioning features or use of this software
- *    must display the following acknowledgement:
- *    "This product includes cryptographic software written by
- *     Eric Young (eay@cryptsoft.com)"
- *    The word 'cryptographic' can be left out if the rouines from the library
- *    being used are not cryptographic related :-).
- * 4. If you include any Windows specific code (or a derivative thereof) from 
- *    the apps directory (application code) you must include an acknowledgement:
- *    "This product includes software written by Tim Hudson (tjh@cryptsoft.com)"
- * 
- * THIS SOFTWARE IS PROVIDED BY ERIC YOUNG ``AS IS'' AND
- * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
- * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
- * ARE DISCLAIMED.  IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE
- * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
- * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
- * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
- * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
- * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
- * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
- * SUCH DAMAGE.
- * 
- * The licence and distribution terms for any publically available version or
- * derivative of this code cannot be changed.  i.e. this code cannot simply be
- * copied and put under another distribution licence
- * [including the GNU Public Licence.]
- */
-/* ====================================================================
- * Copyright (c) 1998-2001 The OpenSSL Project.  All rights reserved.
- *
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions
- * are met:
- *
- * 1. Redistributions of source code must retain the above copyright
- *    notice, this list of conditions and the following disclaimer. 
- *
- * 2. Redistributions in binary form must reproduce the above copyright
- *    notice, this list of conditions and the following disclaimer in
- *    the documentation and/or other materials provided with the
- *    distribution.
- *
- * 3. All advertising materials mentioning features or use of this
- *    software must display the following acknowledgment:
- *    "This product includes software developed by the OpenSSL Project
- *    for use in the OpenSSL Toolkit. (http://www.openssl.org/)"
- *
- * 4. The names "OpenSSL Toolkit" and "OpenSSL Project" must not be used to
- *    endorse or promote products derived from this software without
- *    prior written permission. For written permission, please contact
- *    openssl-core@openssl.org.
- *
- * 5. Products derived from this software may not be called "OpenSSL"
- *    nor may "OpenSSL" appear in their names without prior written
- *    permission of the OpenSSL Project.
- *
- * 6. Redistributions of any form whatsoever must retain the following
- *    acknowledgment:
- *    "This product includes software developed by the OpenSSL Project
- *    for use in the OpenSSL Toolkit (http://www.openssl.org/)"
- *
- * THIS SOFTWARE IS PROVIDED BY THE OpenSSL PROJECT ``AS IS'' AND ANY
- * EXPRESSED OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
- * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR
- * PURPOSE ARE DISCLAIMED.  IN NO EVENT SHALL THE OpenSSL PROJECT OR
- * ITS CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
- * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
- * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
- * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
- * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
- * STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
- * ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED
- * OF THE POSSIBILITY OF SUCH DAMAGE.
- * ====================================================================
- *
- * This product includes cryptographic software written by Eric Young
- * (eay@cryptsoft.com).  This product includes software written by Tim
- * Hudson (tjh@cryptsoft.com).
- *
- */
-
-#include <stdio.h>
-#include <time.h>
-#include "cryptlib.h"
-#include "bn_lcl.h"
-#include <openssl/rand.h>
-
-/* NB: these functions have been "upgraded", the deprecated versions (which are
- * compatibility wrappers using these functions) are in bn_depr.c.
- * - Geoff
- */
-
-/* The quick sieve algorithm approach to weeding out primes is
- * Philip Zimmermann's, as implemented in PGP.  I have had a read of
- * his comments and implemented my own version.
- */
-#include "bn_prime.h"
-
-static int witness(BIGNUM *w, const BIGNUM *a, const BIGNUM *a1,
-	const BIGNUM *a1_odd, int k, BN_CTX *ctx, BN_MONT_CTX *mont);
-static int probable_prime(BIGNUM *rnd, int bits);
-static int probable_prime_dh(BIGNUM *rnd, int bits,
-	const BIGNUM *add, const BIGNUM *rem, BN_CTX *ctx);
-static int probable_prime_dh_safe(BIGNUM *rnd, int bits,
-	const BIGNUM *add, const BIGNUM *rem, BN_CTX *ctx);
-
-int BN_GENCB_call(BN_GENCB *cb, int a, int b)
-	{
-	/* No callback means continue */
-	if(!cb) return 1;
-	switch(cb->ver)
-		{
-	case 1:
-		/* Deprecated-style callbacks */
-		if(!cb->cb.cb_1)
-			return 1;
-		cb->cb.cb_1(a, b, cb->arg);
-		return 1;
-	case 2:
-		/* New-style callbacks */
-		return cb->cb.cb_2(a, b, cb);
-	default:
-		break;
-		}
-	/* Unrecognised callback type */
-	return 0;
-	}
-
-int BN_generate_prime_ex(BIGNUM *ret, int bits, int safe,
-	const BIGNUM *add, const BIGNUM *rem, BN_GENCB *cb)
-	{
-	BIGNUM *t;
-	int found=0;
-	int i,j,c1=0;
-	BN_CTX *ctx;
-	int checks = BN_prime_checks_for_size(bits);
-
-	ctx=BN_CTX_new();
-	if (ctx == NULL) goto err;
-	BN_CTX_start(ctx);
-	t = BN_CTX_get(ctx);
-	if(!t) goto err;
-loop: 
-	/* make a random number and set the top and bottom bits */
-	if (add == NULL)
-		{
-		if (!probable_prime(ret,bits)) goto err;
-		}
-	else
-		{
-		if (safe)
-			{
-			if (!probable_prime_dh_safe(ret,bits,add,rem,ctx))
-				 goto err;
-			}
-		else
-			{
-			if (!probable_prime_dh(ret,bits,add,rem,ctx))
-				goto err;
-			}
-		}
-	/* if (BN_mod_word(ret,(BN_ULONG)3) == 1) goto loop; */
-	if(!BN_GENCB_call(cb, 0, c1++))
-		/* aborted */
-		goto err;
-
-	if (!safe)
-		{
-		i=BN_is_prime_fasttest_ex(ret,checks,ctx,0,cb);
-		if (i == -1) goto err;
-		if (i == 0) goto loop;
-		}
-	else
-		{
-		/* for "safe prime" generation,
-		 * check that (p-1)/2 is prime.
-		 * Since a prime is odd, We just
-		 * need to divide by 2 */
-		if (!BN_rshift1(t,ret)) goto err;
-
-		for (i=0; i<checks; i++)
-			{
-			j=BN_is_prime_fasttest_ex(ret,1,ctx,0,cb);
-			if (j == -1) goto err;
-			if (j == 0) goto loop;
-
-			j=BN_is_prime_fasttest_ex(t,1,ctx,0,cb);
-			if (j == -1) goto err;
-			if (j == 0) goto loop;
-
-			if(!BN_GENCB_call(cb, 2, c1-1))
-				goto err;
-			/* We have a safe prime test pass */
-			}
-		}
-	/* we have a prime :-) */
-	found = 1;
-err:
-	if (ctx != NULL)
-		{
-		BN_CTX_end(ctx);
-		BN_CTX_free(ctx);
-		}
-	bn_check_top(ret);
-	return found;
-	}
-
-int BN_is_prime_ex(const BIGNUM *a, int checks, BN_CTX *ctx_passed, BN_GENCB *cb)
-	{
-	return BN_is_prime_fasttest_ex(a, checks, ctx_passed, 0, cb);
-	}
-
-int BN_is_prime_fasttest_ex(const BIGNUM *a, int checks, BN_CTX *ctx_passed,
-		int do_trial_division, BN_GENCB *cb)
-	{
-	int i, j, ret = -1;
-	int k;
-	BN_CTX *ctx = NULL;
-	BIGNUM *A1, *A1_odd, *check; /* taken from ctx */
-	BN_MONT_CTX *mont = NULL;
-	const BIGNUM *A = NULL;
-
-	if (BN_cmp(a, BN_value_one()) <= 0)
-		return 0;
-	
-	if (checks == BN_prime_checks)
-		checks = BN_prime_checks_for_size(BN_num_bits(a));
-
-	/* first look for small factors */
-	if (!BN_is_odd(a))
-		/* a is even => a is prime if and only if a == 2 */
-		return BN_is_word(a, 2);
-	if (do_trial_division)
-		{
-		for (i = 1; i < NUMPRIMES; i++)
-			if (BN_mod_word(a, primes[i]) == 0) 
-				return 0;
-		if(!BN_GENCB_call(cb, 1, -1))
-			goto err;
-		}
-
-	if (ctx_passed != NULL)
-		ctx = ctx_passed;
-	else
-		if ((ctx=BN_CTX_new()) == NULL)
-			goto err;
-	BN_CTX_start(ctx);
-
-	/* A := abs(a) */
-	if (a->neg)
-		{
-		BIGNUM *t;
-		if ((t = BN_CTX_get(ctx)) == NULL) goto err;
-		BN_copy(t, a);
-		t->neg = 0;
-		A = t;
-		}
-	else
-		A = a;
-	A1 = BN_CTX_get(ctx);
-	A1_odd = BN_CTX_get(ctx);
-	check = BN_CTX_get(ctx);
-	if (check == NULL) goto err;
-
-	/* compute A1 := A - 1 */
-	if (!BN_copy(A1, A))
-		goto err;
-	if (!BN_sub_word(A1, 1))
-		goto err;
-	if (BN_is_zero(A1))
-		{
-		ret = 0;
-		goto err;
-		}
-
-	/* write  A1  as  A1_odd * 2^k */
-	k = 1;
-	while (!BN_is_bit_set(A1, k))
-		k++;
-	if (!BN_rshift(A1_odd, A1, k))
-		goto err;
-
-	/* Montgomery setup for computations mod A */
-	mont = BN_MONT_CTX_new();
-	if (mont == NULL)
-		goto err;
-	if (!BN_MONT_CTX_set(mont, A, ctx))
-		goto err;
-	
-	for (i = 0; i < checks; i++)
-		{
-		if (!BN_pseudo_rand_range(check, A1))
-			goto err;
-		if (!BN_add_word(check, 1))
-			goto err;
-		/* now 1 <= check < A */
-
-		j = witness(check, A, A1, A1_odd, k, ctx, mont);
-		if (j == -1) goto err;
-		if (j)
-			{
-			ret=0;
-			goto err;
-			}
-		if(!BN_GENCB_call(cb, 1, i))
-			goto err;
-		}
-	ret=1;
-err:
-	if (ctx != NULL)
-		{
-		BN_CTX_end(ctx);
-		if (ctx_passed == NULL)
-			BN_CTX_free(ctx);
-		}
-	if (mont != NULL)
-		BN_MONT_CTX_free(mont);
-
-	return(ret);
-	}
-
-static int witness(BIGNUM *w, const BIGNUM *a, const BIGNUM *a1,
-	const BIGNUM *a1_odd, int k, BN_CTX *ctx, BN_MONT_CTX *mont)
-	{
-	if (!BN_mod_exp_mont(w, w, a1_odd, a, ctx, mont)) /* w := w^a1_odd mod a */
-		return -1;
-	if (BN_is_one(w))
-		return 0; /* probably prime */
-	if (BN_cmp(w, a1) == 0)
-		return 0; /* w == -1 (mod a),  'a' is probably prime */
-	while (--k)
-		{
-		if (!BN_mod_mul(w, w, w, a, ctx)) /* w := w^2 mod a */
-			return -1;
-		if (BN_is_one(w))
-			return 1; /* 'a' is composite, otherwise a previous 'w' would
-			           * have been == -1 (mod 'a') */
-		if (BN_cmp(w, a1) == 0)
-			return 0; /* w == -1 (mod a), 'a' is probably prime */
-		}
-	/* If we get here, 'w' is the (a-1)/2-th power of the original 'w',
-	 * and it is neither -1 nor +1 -- so 'a' cannot be prime */
-	bn_check_top(w);
-	return 1;
-	}
-
-static int probable_prime(BIGNUM *rnd, int bits)
-	{
-	int i;
-	BN_ULONG mods[NUMPRIMES];
-	BN_ULONG delta,maxdelta;
-
-again:
-	if (!BN_rand(rnd,bits,1,1)) return(0);
-	/* we now have a random number 'rand' to test. */
-	for (i=1; i<NUMPRIMES; i++)
-		mods[i]=BN_mod_word(rnd,(BN_ULONG)primes[i]);
-	maxdelta=BN_MASK2 - primes[NUMPRIMES-1];
-	delta=0;
-	loop: for (i=1; i<NUMPRIMES; i++)
-		{
-		/* check that rnd is not a prime and also
-		 * that gcd(rnd-1,primes) == 1 (except for 2) */
-		if (((mods[i]+delta)%primes[i]) <= 1)
-			{
-			delta+=2;
-			if (delta > maxdelta) goto again;
-			goto loop;
-			}
-		}
-	if (!BN_add_word(rnd,delta)) return(0);
-	bn_check_top(rnd);
-	return(1);
-	}
-
-static int probable_prime_dh(BIGNUM *rnd, int bits,
-	const BIGNUM *add, const BIGNUM *rem, BN_CTX *ctx)
-	{
-	int i,ret=0;
-	BIGNUM *t1;
-
-	BN_CTX_start(ctx);
-	if ((t1 = BN_CTX_get(ctx)) == NULL) goto err;
-
-	if (!BN_rand(rnd,bits,0,1)) goto err;
-
-	/* we need ((rnd-rem) % add) == 0 */
-
-	if (!BN_mod(t1,rnd,add,ctx)) goto err;
-	if (!BN_sub(rnd,rnd,t1)) goto err;
-	if (rem == NULL)
-		{ if (!BN_add_word(rnd,1)) goto err; }
-	else
-		{ if (!BN_add(rnd,rnd,rem)) goto err; }
-
-	/* we now have a random number 'rand' to test. */
-
-	loop: for (i=1; i<NUMPRIMES; i++)
-		{
-		/* check that rnd is a prime */
-		if (BN_mod_word(rnd,(BN_ULONG)primes[i]) <= 1)
-			{
-			if (!BN_add(rnd,rnd,add)) goto err;
-			goto loop;
-			}
-		}
-	ret=1;
-err:
-	BN_CTX_end(ctx);
-	bn_check_top(rnd);
-	return(ret);
-	}
-
-static int probable_prime_dh_safe(BIGNUM *p, int bits, const BIGNUM *padd,
-	const BIGNUM *rem, BN_CTX *ctx)
-	{
-	int i,ret=0;
-	BIGNUM *t1,*qadd,*q;
-
-	bits--;
-	BN_CTX_start(ctx);
-	t1 = BN_CTX_get(ctx);
-	q = BN_CTX_get(ctx);
-	qadd = BN_CTX_get(ctx);
-	if (qadd == NULL) goto err;
-
-	if (!BN_rshift1(qadd,padd)) goto err;
-		
-	if (!BN_rand(q,bits,0,1)) goto err;
-
-	/* we need ((rnd-rem) % add) == 0 */
-	if (!BN_mod(t1,q,qadd,ctx)) goto err;
-	if (!BN_sub(q,q,t1)) goto err;
-	if (rem == NULL)
-		{ if (!BN_add_word(q,1)) goto err; }
-	else
-		{
-		if (!BN_rshift1(t1,rem)) goto err;
-		if (!BN_add(q,q,t1)) goto err;
-		}
-
-	/* we now have a random number 'rand' to test. */
-	if (!BN_lshift1(p,q)) goto err;
-	if (!BN_add_word(p,1)) goto err;
-
-	loop: for (i=1; i<NUMPRIMES; i++)
-		{
-		/* check that p and q are prime */
-		/* check that for p and q
-		 * gcd(p-1,primes) == 1 (except for 2) */
-		if (	(BN_mod_word(p,(BN_ULONG)primes[i]) == 0) ||
-			(BN_mod_word(q,(BN_ULONG)primes[i]) == 0))
-			{
-			if (!BN_add(p,p,padd)) goto err;
-			if (!BN_add(q,q,qadd)) goto err;
-			goto loop;
-			}
-		}
-	ret=1;
-err:
-	BN_CTX_end(ctx);
-	bn_check_top(p);
-	return(ret);
-	}
diff --git a/crypto/openssl/crypto/bn/bn_prime.h b/crypto/openssl/crypto/bn/bn_prime.h
deleted file mode 100644
index b7cf9a9bfe12..000000000000
--- a/crypto/openssl/crypto/bn/bn_prime.h
+++ /dev/null
@@ -1,325 +0,0 @@
-/* Auto generated by bn_prime.pl */
-/* Copyright (C) 1995-1998 Eric Young (eay@cryptsoft.com)
- * All rights reserved.
- *
- * This package is an SSL implementation written
- * by Eric Young (eay@cryptsoft.com).
- * The implementation was written so as to conform with Netscapes SSL.
- * 
- * This library is free for commercial and non-commercial use as long as
- * the following conditions are aheared to.  The following conditions
- * apply to all code found in this distribution, be it the RC4, RSA,
- * lhash, DES, etc., code; not just the SSL code.  The SSL documentation
- * included with this distribution is covered by the same copyright terms
- * except that the holder is Tim Hudson (tjh@cryptsoft.com).
- * 
- * Copyright remains Eric Young's, and as such any Copyright notices in
- * the code are not to be removed.
- * If this package is used in a product, Eric Young should be given attribution
- * as the author of the parts of the library used.
- * This can be in the form of a textual message at program startup or
- * in documentation (online or textual) provided with the package.
- * 
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions
- * are met:
- * 1. Redistributions of source code must retain the copyright
- *    notice, this list of conditions and the following disclaimer.
- * 2. Redistributions in binary form must reproduce the above copyright
- *    notice, this list of conditions and the following disclaimer in the
- *    documentation and/or other materials provided with the distribution.
- * 3. All advertising materials mentioning features or use of this software
- *    must display the following acknowledgement:
- *    "This product includes cryptographic software written by
- *     Eric Young (eay@cryptsoft.com)"
- *    The word 'cryptographic' can be left out if the rouines from the library
- *    being used are not cryptographic related :-).
- * 4. If you include any Windows specific code (or a derivative thereof) from 
- *    the apps directory (application code) you must include an acknowledgement:
- *    "This product includes software written by Tim Hudson (tjh@cryptsoft.com)"
- * 
- * THIS SOFTWARE IS PROVIDED BY ERIC YOUNG ``AS IS'' AND
- * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
- * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
- * ARE DISCLAIMED.  IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE
- * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
- * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
- * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
- * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
- * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
- * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
- * SUCH DAMAGE.
- * 
- * The licence and distribution terms for any publically available version or
- * derivative of this code cannot be changed.  i.e. this code cannot simply be
- * copied and put under another distribution licence
- * [including the GNU Public Licence.]
- */
-
-#ifndef EIGHT_BIT
-#define NUMPRIMES 2048
-#else
-#define NUMPRIMES 54
-#endif
-static const unsigned int primes[NUMPRIMES]=
-	{
-	   2,   3,   5,   7,  11,  13,  17,  19,
-	  23,  29,  31,  37,  41,  43,  47,  53,
-	  59,  61,  67,  71,  73,  79,  83,  89,
-	  97, 101, 103, 107, 109, 113, 127, 131,
-	 137, 139, 149, 151, 157, 163, 167, 173,
-	 179, 181, 191, 193, 197, 199, 211, 223,
-	 227, 229, 233, 239, 241, 251,
-#ifndef EIGHT_BIT
-	 257, 263,
-	 269, 271, 277, 281, 283, 293, 307, 311,
-	 313, 317, 331, 337, 347, 349, 353, 359,
-	 367, 373, 379, 383, 389, 397, 401, 409,
-	 419, 421, 431, 433, 439, 443, 449, 457,
-	 461, 463, 467, 479, 487, 491, 499, 503,
-	 509, 521, 523, 541, 547, 557, 563, 569,
-	 571, 577, 587, 593, 599, 601, 607, 613,
-	 617, 619, 631, 641, 643, 647, 653, 659,
-	 661, 673, 677, 683, 691, 701, 709, 719,
-	 727, 733, 739, 743, 751, 757, 761, 769,
-	 773, 787, 797, 809, 811, 821, 823, 827,
-	 829, 839, 853, 857, 859, 863, 877, 881,
-	 883, 887, 907, 911, 919, 929, 937, 941,
-	 947, 953, 967, 971, 977, 983, 991, 997,
-	1009,1013,1019,1021,1031,1033,1039,1049,
-	1051,1061,1063,1069,1087,1091,1093,1097,
-	1103,1109,1117,1123,1129,1151,1153,1163,
-	1171,1181,1187,1193,1201,1213,1217,1223,
-	1229,1231,1237,1249,1259,1277,1279,1283,
-	1289,1291,1297,1301,1303,1307,1319,1321,
-	1327,1361,1367,1373,1381,1399,1409,1423,
-	1427,1429,1433,1439,1447,1451,1453,1459,
-	1471,1481,1483,1487,1489,1493,1499,1511,
-	1523,1531,1543,1549,1553,1559,1567,1571,
-	1579,1583,1597,1601,1607,1609,1613,1619,
-	1621,1627,1637,1657,1663,1667,1669,1693,
-	1697,1699,1709,1721,1723,1733,1741,1747,
-	1753,1759,1777,1783,1787,1789,1801,1811,
-	1823,1831,1847,1861,1867,1871,1873,1877,
-	1879,1889,1901,1907,1913,1931,1933,1949,
-	1951,1973,1979,1987,1993,1997,1999,2003,
-	2011,2017,2027,2029,2039,2053,2063,2069,
-	2081,2083,2087,2089,2099,2111,2113,2129,
-	2131,2137,2141,2143,2153,2161,2179,2203,
-	2207,2213,2221,2237,2239,2243,2251,2267,
-	2269,2273,2281,2287,2293,2297,2309,2311,
-	2333,2339,2341,2347,2351,2357,2371,2377,
-	2381,2383,2389,2393,2399,2411,2417,2423,
-	2437,2441,2447,2459,2467,2473,2477,2503,
-	2521,2531,2539,2543,2549,2551,2557,2579,
-	2591,2593,2609,2617,2621,2633,2647,2657,
-	2659,2663,2671,2677,2683,2687,2689,2693,
-	2699,2707,2711,2713,2719,2729,2731,2741,
-	2749,2753,2767,2777,2789,2791,2797,2801,
-	2803,2819,2833,2837,2843,2851,2857,2861,
-	2879,2887,2897,2903,2909,2917,2927,2939,
-	2953,2957,2963,2969,2971,2999,3001,3011,
-	3019,3023,3037,3041,3049,3061,3067,3079,
-	3083,3089,3109,3119,3121,3137,3163,3167,
-	3169,3181,3187,3191,3203,3209,3217,3221,
-	3229,3251,3253,3257,3259,3271,3299,3301,
-	3307,3313,3319,3323,3329,3331,3343,3347,
-	3359,3361,3371,3373,3389,3391,3407,3413,
-	3433,3449,3457,3461,3463,3467,3469,3491,
-	3499,3511,3517,3527,3529,3533,3539,3541,
-	3547,3557,3559,3571,3581,3583,3593,3607,
-	3613,3617,3623,3631,3637,3643,3659,3671,
-	3673,3677,3691,3697,3701,3709,3719,3727,
-	3733,3739,3761,3767,3769,3779,3793,3797,
-	3803,3821,3823,3833,3847,3851,3853,3863,
-	3877,3881,3889,3907,3911,3917,3919,3923,
-	3929,3931,3943,3947,3967,3989,4001,4003,
-	4007,4013,4019,4021,4027,4049,4051,4057,
-	4073,4079,4091,4093,4099,4111,4127,4129,
-	4133,4139,4153,4157,4159,4177,4201,4211,
-	4217,4219,4229,4231,4241,4243,4253,4259,
-	4261,4271,4273,4283,4289,4297,4327,4337,
-	4339,4349,4357,4363,4373,4391,4397,4409,
-	4421,4423,4441,4447,4451,4457,4463,4481,
-	4483,4493,4507,4513,4517,4519,4523,4547,
-	4549,4561,4567,4583,4591,4597,4603,4621,
-	4637,4639,4643,4649,4651,4657,4663,4673,
-	4679,4691,4703,4721,4723,4729,4733,4751,
-	4759,4783,4787,4789,4793,4799,4801,4813,
-	4817,4831,4861,4871,4877,4889,4903,4909,
-	4919,4931,4933,4937,4943,4951,4957,4967,
-	4969,4973,4987,4993,4999,5003,5009,5011,
-	5021,5023,5039,5051,5059,5077,5081,5087,
-	5099,5101,5107,5113,5119,5147,5153,5167,
-	5171,5179,5189,5197,5209,5227,5231,5233,
-	5237,5261,5273,5279,5281,5297,5303,5309,
-	5323,5333,5347,5351,5381,5387,5393,5399,
-	5407,5413,5417,5419,5431,5437,5441,5443,
-	5449,5471,5477,5479,5483,5501,5503,5507,
-	5519,5521,5527,5531,5557,5563,5569,5573,
-	5581,5591,5623,5639,5641,5647,5651,5653,
-	5657,5659,5669,5683,5689,5693,5701,5711,
-	5717,5737,5741,5743,5749,5779,5783,5791,
-	5801,5807,5813,5821,5827,5839,5843,5849,
-	5851,5857,5861,5867,5869,5879,5881,5897,
-	5903,5923,5927,5939,5953,5981,5987,6007,
-	6011,6029,6037,6043,6047,6053,6067,6073,
-	6079,6089,6091,6101,6113,6121,6131,6133,
-	6143,6151,6163,6173,6197,6199,6203,6211,
-	6217,6221,6229,6247,6257,6263,6269,6271,
-	6277,6287,6299,6301,6311,6317,6323,6329,
-	6337,6343,6353,6359,6361,6367,6373,6379,
-	6389,6397,6421,6427,6449,6451,6469,6473,
-	6481,6491,6521,6529,6547,6551,6553,6563,
-	6569,6571,6577,6581,6599,6607,6619,6637,
-	6653,6659,6661,6673,6679,6689,6691,6701,
-	6703,6709,6719,6733,6737,6761,6763,6779,
-	6781,6791,6793,6803,6823,6827,6829,6833,
-	6841,6857,6863,6869,6871,6883,6899,6907,
-	6911,6917,6947,6949,6959,6961,6967,6971,
-	6977,6983,6991,6997,7001,7013,7019,7027,
-	7039,7043,7057,7069,7079,7103,7109,7121,
-	7127,7129,7151,7159,7177,7187,7193,7207,
-	7211,7213,7219,7229,7237,7243,7247,7253,
-	7283,7297,7307,7309,7321,7331,7333,7349,
-	7351,7369,7393,7411,7417,7433,7451,7457,
-	7459,7477,7481,7487,7489,7499,7507,7517,
-	7523,7529,7537,7541,7547,7549,7559,7561,
-	7573,7577,7583,7589,7591,7603,7607,7621,
-	7639,7643,7649,7669,7673,7681,7687,7691,
-	7699,7703,7717,7723,7727,7741,7753,7757,
-	7759,7789,7793,7817,7823,7829,7841,7853,
-	7867,7873,7877,7879,7883,7901,7907,7919,
-	7927,7933,7937,7949,7951,7963,7993,8009,
-	8011,8017,8039,8053,8059,8069,8081,8087,
-	8089,8093,8101,8111,8117,8123,8147,8161,
-	8167,8171,8179,8191,8209,8219,8221,8231,
-	8233,8237,8243,8263,8269,8273,8287,8291,
-	8293,8297,8311,8317,8329,8353,8363,8369,
-	8377,8387,8389,8419,8423,8429,8431,8443,
-	8447,8461,8467,8501,8513,8521,8527,8537,
-	8539,8543,8563,8573,8581,8597,8599,8609,
-	8623,8627,8629,8641,8647,8663,8669,8677,
-	8681,8689,8693,8699,8707,8713,8719,8731,
-	8737,8741,8747,8753,8761,8779,8783,8803,
-	8807,8819,8821,8831,8837,8839,8849,8861,
-	8863,8867,8887,8893,8923,8929,8933,8941,
-	8951,8963,8969,8971,8999,9001,9007,9011,
-	9013,9029,9041,9043,9049,9059,9067,9091,
-	9103,9109,9127,9133,9137,9151,9157,9161,
-	9173,9181,9187,9199,9203,9209,9221,9227,
-	9239,9241,9257,9277,9281,9283,9293,9311,
-	9319,9323,9337,9341,9343,9349,9371,9377,
-	9391,9397,9403,9413,9419,9421,9431,9433,
-	9437,9439,9461,9463,9467,9473,9479,9491,
-	9497,9511,9521,9533,9539,9547,9551,9587,
-	9601,9613,9619,9623,9629,9631,9643,9649,
-	9661,9677,9679,9689,9697,9719,9721,9733,
-	9739,9743,9749,9767,9769,9781,9787,9791,
-	9803,9811,9817,9829,9833,9839,9851,9857,
-	9859,9871,9883,9887,9901,9907,9923,9929,
-	9931,9941,9949,9967,9973,10007,10009,10037,
-	10039,10061,10067,10069,10079,10091,10093,10099,
-	10103,10111,10133,10139,10141,10151,10159,10163,
-	10169,10177,10181,10193,10211,10223,10243,10247,
-	10253,10259,10267,10271,10273,10289,10301,10303,
-	10313,10321,10331,10333,10337,10343,10357,10369,
-	10391,10399,10427,10429,10433,10453,10457,10459,
-	10463,10477,10487,10499,10501,10513,10529,10531,
-	10559,10567,10589,10597,10601,10607,10613,10627,
-	10631,10639,10651,10657,10663,10667,10687,10691,
-	10709,10711,10723,10729,10733,10739,10753,10771,
-	10781,10789,10799,10831,10837,10847,10853,10859,
-	10861,10867,10883,10889,10891,10903,10909,10937,
-	10939,10949,10957,10973,10979,10987,10993,11003,
-	11027,11047,11057,11059,11069,11071,11083,11087,
-	11093,11113,11117,11119,11131,11149,11159,11161,
-	11171,11173,11177,11197,11213,11239,11243,11251,
-	11257,11261,11273,11279,11287,11299,11311,11317,
-	11321,11329,11351,11353,11369,11383,11393,11399,
-	11411,11423,11437,11443,11447,11467,11471,11483,
-	11489,11491,11497,11503,11519,11527,11549,11551,
-	11579,11587,11593,11597,11617,11621,11633,11657,
-	11677,11681,11689,11699,11701,11717,11719,11731,
-	11743,11777,11779,11783,11789,11801,11807,11813,
-	11821,11827,11831,11833,11839,11863,11867,11887,
-	11897,11903,11909,11923,11927,11933,11939,11941,
-	11953,11959,11969,11971,11981,11987,12007,12011,
-	12037,12041,12043,12049,12071,12073,12097,12101,
-	12107,12109,12113,12119,12143,12149,12157,12161,
-	12163,12197,12203,12211,12227,12239,12241,12251,
-	12253,12263,12269,12277,12281,12289,12301,12323,
-	12329,12343,12347,12373,12377,12379,12391,12401,
-	12409,12413,12421,12433,12437,12451,12457,12473,
-	12479,12487,12491,12497,12503,12511,12517,12527,
-	12539,12541,12547,12553,12569,12577,12583,12589,
-	12601,12611,12613,12619,12637,12641,12647,12653,
-	12659,12671,12689,12697,12703,12713,12721,12739,
-	12743,12757,12763,12781,12791,12799,12809,12821,
-	12823,12829,12841,12853,12889,12893,12899,12907,
-	12911,12917,12919,12923,12941,12953,12959,12967,
-	12973,12979,12983,13001,13003,13007,13009,13033,
-	13037,13043,13049,13063,13093,13099,13103,13109,
-	13121,13127,13147,13151,13159,13163,13171,13177,
-	13183,13187,13217,13219,13229,13241,13249,13259,
-	13267,13291,13297,13309,13313,13327,13331,13337,
-	13339,13367,13381,13397,13399,13411,13417,13421,
-	13441,13451,13457,13463,13469,13477,13487,13499,
-	13513,13523,13537,13553,13567,13577,13591,13597,
-	13613,13619,13627,13633,13649,13669,13679,13681,
-	13687,13691,13693,13697,13709,13711,13721,13723,
-	13729,13751,13757,13759,13763,13781,13789,13799,
-	13807,13829,13831,13841,13859,13873,13877,13879,
-	13883,13901,13903,13907,13913,13921,13931,13933,
-	13963,13967,13997,13999,14009,14011,14029,14033,
-	14051,14057,14071,14081,14083,14087,14107,14143,
-	14149,14153,14159,14173,14177,14197,14207,14221,
-	14243,14249,14251,14281,14293,14303,14321,14323,
-	14327,14341,14347,14369,14387,14389,14401,14407,
-	14411,14419,14423,14431,14437,14447,14449,14461,
-	14479,14489,14503,14519,14533,14537,14543,14549,
-	14551,14557,14561,14563,14591,14593,14621,14627,
-	14629,14633,14639,14653,14657,14669,14683,14699,
-	14713,14717,14723,14731,14737,14741,14747,14753,
-	14759,14767,14771,14779,14783,14797,14813,14821,
-	14827,14831,14843,14851,14867,14869,14879,14887,
-	14891,14897,14923,14929,14939,14947,14951,14957,
-	14969,14983,15013,15017,15031,15053,15061,15073,
-	15077,15083,15091,15101,15107,15121,15131,15137,
-	15139,15149,15161,15173,15187,15193,15199,15217,
-	15227,15233,15241,15259,15263,15269,15271,15277,
-	15287,15289,15299,15307,15313,15319,15329,15331,
-	15349,15359,15361,15373,15377,15383,15391,15401,
-	15413,15427,15439,15443,15451,15461,15467,15473,
-	15493,15497,15511,15527,15541,15551,15559,15569,
-	15581,15583,15601,15607,15619,15629,15641,15643,
-	15647,15649,15661,15667,15671,15679,15683,15727,
-	15731,15733,15737,15739,15749,15761,15767,15773,
-	15787,15791,15797,15803,15809,15817,15823,15859,
-	15877,15881,15887,15889,15901,15907,15913,15919,
-	15923,15937,15959,15971,15973,15991,16001,16007,
-	16033,16057,16061,16063,16067,16069,16073,16087,
-	16091,16097,16103,16111,16127,16139,16141,16183,
-	16187,16189,16193,16217,16223,16229,16231,16249,
-	16253,16267,16273,16301,16319,16333,16339,16349,
-	16361,16363,16369,16381,16411,16417,16421,16427,
-	16433,16447,16451,16453,16477,16481,16487,16493,
-	16519,16529,16547,16553,16561,16567,16573,16603,
-	16607,16619,16631,16633,16649,16651,16657,16661,
-	16673,16691,16693,16699,16703,16729,16741,16747,
-	16759,16763,16787,16811,16823,16829,16831,16843,
-	16871,16879,16883,16889,16901,16903,16921,16927,
-	16931,16937,16943,16963,16979,16981,16987,16993,
-	17011,17021,17027,17029,17033,17041,17047,17053,
-	17077,17093,17099,17107,17117,17123,17137,17159,
-	17167,17183,17189,17191,17203,17207,17209,17231,
-	17239,17257,17291,17293,17299,17317,17321,17327,
-	17333,17341,17351,17359,17377,17383,17387,17389,
-	17393,17401,17417,17419,17431,17443,17449,17467,
-	17471,17477,17483,17489,17491,17497,17509,17519,
-	17539,17551,17569,17573,17579,17581,17597,17599,
-	17609,17623,17627,17657,17659,17669,17681,17683,
-	17707,17713,17729,17737,17747,17749,17761,17783,
-	17789,17791,17807,17827,17837,17839,17851,17863,
-#endif
-	};
diff --git a/crypto/openssl/crypto/bn/bn_prime.pl b/crypto/openssl/crypto/bn/bn_prime.pl
deleted file mode 100644
index e583d1d53b9d..000000000000
--- a/crypto/openssl/crypto/bn/bn_prime.pl
+++ /dev/null
@@ -1,117 +0,0 @@
-#!/usr/local/bin/perl
-# bn_prime.pl
-
-$num=2048;
-$num=$ARGV[0] if ($#ARGV >= 0);
-
-push(@primes,2);
-$p=1;
-loop: while ($#primes < $num-1)
-	{
-	$p+=2;
-	$s=int(sqrt($p));
-
-	for ($i=0; defined($primes[$i]) && $primes[$i]<=$s; $i++)
-		{
-		next loop if (($p%$primes[$i]) == 0);
-		}
-	push(@primes,$p);
-	}
-
-# print <<"EOF";
-# /* Auto generated by bn_prime.pl */
-# /* Copyright (C) 1995-1997 Eric Young (eay\@mincom.oz.au).
-#  * All rights reserved.
-#  * Copyright remains Eric Young's, and as such any Copyright notices in
-#  * the code are not to be removed.
-#  * See the COPYRIGHT file in the SSLeay distribution for more details.
-#  */
-# 
-# EOF
-
-print <<\EOF;
-/* Auto generated by bn_prime.pl */
-/* Copyright (C) 1995-1998 Eric Young (eay@cryptsoft.com)
- * All rights reserved.
- *
- * This package is an SSL implementation written
- * by Eric Young (eay@cryptsoft.com).
- * The implementation was written so as to conform with Netscapes SSL.
- * 
- * This library is free for commercial and non-commercial use as long as
- * the following conditions are aheared to.  The following conditions
- * apply to all code found in this distribution, be it the RC4, RSA,
- * lhash, DES, etc., code; not just the SSL code.  The SSL documentation
- * included with this distribution is covered by the same copyright terms
- * except that the holder is Tim Hudson (tjh@cryptsoft.com).
- * 
- * Copyright remains Eric Young's, and as such any Copyright notices in
- * the code are not to be removed.
- * If this package is used in a product, Eric Young should be given attribution
- * as the author of the parts of the library used.
- * This can be in the form of a textual message at program startup or
- * in documentation (online or textual) provided with the package.
- * 
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions
- * are met:
- * 1. Redistributions of source code must retain the copyright
- *    notice, this list of conditions and the following disclaimer.
- * 2. Redistributions in binary form must reproduce the above copyright
- *    notice, this list of conditions and the following disclaimer in the
- *    documentation and/or other materials provided with the distribution.
- * 3. All advertising materials mentioning features or use of this software
- *    must display the following acknowledgement:
- *    "This product includes cryptographic software written by
- *     Eric Young (eay@cryptsoft.com)"
- *    The word 'cryptographic' can be left out if the rouines from the library
- *    being used are not cryptographic related :-).
- * 4. If you include any Windows specific code (or a derivative thereof) from 
- *    the apps directory (application code) you must include an acknowledgement:
- *    "This product includes software written by Tim Hudson (tjh@cryptsoft.com)"
- * 
- * THIS SOFTWARE IS PROVIDED BY ERIC YOUNG ``AS IS'' AND
- * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
- * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
- * ARE DISCLAIMED.  IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE
- * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
- * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
- * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
- * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
- * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
- * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
- * SUCH DAMAGE.
- * 
- * The licence and distribution terms for any publically available version or
- * derivative of this code cannot be changed.  i.e. this code cannot simply be
- * copied and put under another distribution licence
- * [including the GNU Public Licence.]
- */
-
-EOF
-
-for ($i=0; $i <= $#primes; $i++)
-	{
-	if ($primes[$i] > 256)
-		{
-		$eight=$i;
-		last;
-		}
-	}
-
-printf "#ifndef EIGHT_BIT\n";
-printf "#define NUMPRIMES %d\n",$num;
-printf "#else\n";
-printf "#define NUMPRIMES %d\n",$eight;
-printf "#endif\n";
-print "static const unsigned int primes[NUMPRIMES]=\n\t{\n\t";
-$init=0;
-for ($i=0; $i <= $#primes; $i++)
-	{
-	printf "\n#ifndef EIGHT_BIT\n\t" if ($primes[$i] > 256) && !($init++);
-	printf("\n\t") if (($i%8) == 0) && ($i != 0);
-	printf("%4d,",$primes[$i]);
-	}
-print "\n#endif\n\t};\n";
-
-
diff --git a/crypto/openssl/crypto/bn/bn_print.c b/crypto/openssl/crypto/bn/bn_print.c
deleted file mode 100644
index 810dde34e15c..000000000000
--- a/crypto/openssl/crypto/bn/bn_print.c
+++ /dev/null
@@ -1,338 +0,0 @@
-/* crypto/bn/bn_print.c */
-/* Copyright (C) 1995-1998 Eric Young (eay@cryptsoft.com)
- * All rights reserved.
- *
- * This package is an SSL implementation written
- * by Eric Young (eay@cryptsoft.com).
- * The implementation was written so as to conform with Netscapes SSL.
- * 
- * This library is free for commercial and non-commercial use as long as
- * the following conditions are aheared to.  The following conditions
- * apply to all code found in this distribution, be it the RC4, RSA,
- * lhash, DES, etc., code; not just the SSL code.  The SSL documentation
- * included with this distribution is covered by the same copyright terms
- * except that the holder is Tim Hudson (tjh@cryptsoft.com).
- * 
- * Copyright remains Eric Young's, and as such any Copyright notices in
- * the code are not to be removed.
- * If this package is used in a product, Eric Young should be given attribution
- * as the author of the parts of the library used.
- * This can be in the form of a textual message at program startup or
- * in documentation (online or textual) provided with the package.
- * 
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions
- * are met:
- * 1. Redistributions of source code must retain the copyright
- *    notice, this list of conditions and the following disclaimer.
- * 2. Redistributions in binary form must reproduce the above copyright
- *    notice, this list of conditions and the following disclaimer in the
- *    documentation and/or other materials provided with the distribution.
- * 3. All advertising materials mentioning features or use of this software
- *    must display the following acknowledgement:
- *    "This product includes cryptographic software written by
- *     Eric Young (eay@cryptsoft.com)"
- *    The word 'cryptographic' can be left out if the rouines from the library
- *    being used are not cryptographic related :-).
- * 4. If you include any Windows specific code (or a derivative thereof) from 
- *    the apps directory (application code) you must include an acknowledgement:
- *    "This product includes software written by Tim Hudson (tjh@cryptsoft.com)"
- * 
- * THIS SOFTWARE IS PROVIDED BY ERIC YOUNG ``AS IS'' AND
- * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
- * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
- * ARE DISCLAIMED.  IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE
- * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
- * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
- * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
- * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
- * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
- * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
- * SUCH DAMAGE.
- * 
- * The licence and distribution terms for any publically available version or
- * derivative of this code cannot be changed.  i.e. this code cannot simply be
- * copied and put under another distribution licence
- * [including the GNU Public Licence.]
- */
-
-#include <stdio.h>
-#include <ctype.h>
-#include "cryptlib.h"
-#include <openssl/buffer.h>
-#include "bn_lcl.h"
-
-static const char Hex[]="0123456789ABCDEF";
-
-/* Must 'OPENSSL_free' the returned data */
-char *BN_bn2hex(const BIGNUM *a)
-	{
-	int i,j,v,z=0;
-	char *buf;
-	char *p;
-
-	buf=(char *)OPENSSL_malloc(a->top*BN_BYTES*2+2);
-	if (buf == NULL)
-		{
-		BNerr(BN_F_BN_BN2HEX,ERR_R_MALLOC_FAILURE);
-		goto err;
-		}
-	p=buf;
-	if (a->neg) *(p++)='-';
-	if (BN_is_zero(a)) *(p++)='0';
-	for (i=a->top-1; i >=0; i--)
-		{
-		for (j=BN_BITS2-8; j >= 0; j-=8)
-			{
-			/* strip leading zeros */
-			v=((int)(a->d[i]>>(long)j))&0xff;
-			if (z || (v != 0))
-				{
-				*(p++)=Hex[v>>4];
-				*(p++)=Hex[v&0x0f];
-				z=1;
-				}
-			}
-		}
-	*p='\0';
-err:
-	return(buf);
-	}
-
-/* Must 'OPENSSL_free' the returned data */
-char *BN_bn2dec(const BIGNUM *a)
-	{
-	int i=0,num, ok = 0;
-	char *buf=NULL;
-	char *p;
-	BIGNUM *t=NULL;
-	BN_ULONG *bn_data=NULL,*lp;
-
-	/* get an upper bound for the length of the decimal integer
-	 * num <= (BN_num_bits(a) + 1) * log(2)
-	 *     <= 3 * BN_num_bits(a) * 0.1001 + log(2) + 1     (rounding error)
-	 *     <= BN_num_bits(a)/10 + BN_num_bits/1000 + 1 + 1 
-	 */
-	i=BN_num_bits(a)*3;
-	num=(i/10+i/1000+1)+1;
-	bn_data=(BN_ULONG *)OPENSSL_malloc((num/BN_DEC_NUM+1)*sizeof(BN_ULONG));
-	buf=(char *)OPENSSL_malloc(num+3);
-	if ((buf == NULL) || (bn_data == NULL))
-		{
-		BNerr(BN_F_BN_BN2DEC,ERR_R_MALLOC_FAILURE);
-		goto err;
-		}
-	if ((t=BN_dup(a)) == NULL) goto err;
-
-#define BUF_REMAIN (num+3 - (size_t)(p - buf))
-	p=buf;
-	lp=bn_data;
-	if (BN_is_zero(t))
-		{
-		*(p++)='0';
-		*(p++)='\0';
-		}
-	else
-		{
-		if (BN_is_negative(t))
-			*p++ = '-';
-
-		i=0;
-		while (!BN_is_zero(t))
-			{
-			*lp=BN_div_word(t,BN_DEC_CONV);
-			lp++;
-			}
-		lp--;
-		/* We now have a series of blocks, BN_DEC_NUM chars
-		 * in length, where the last one needs truncation.
-		 * The blocks need to be reversed in order. */
-		BIO_snprintf(p,BUF_REMAIN,BN_DEC_FMT1,*lp);
-		while (*p) p++;
-		while (lp != bn_data)
-			{
-			lp--;
-			BIO_snprintf(p,BUF_REMAIN,BN_DEC_FMT2,*lp);
-			while (*p) p++;
-			}
-		}
-	ok = 1;
-err:
-	if (bn_data != NULL) OPENSSL_free(bn_data);
-	if (t != NULL) BN_free(t);
-	if (!ok && buf)
-		{
-		OPENSSL_free(buf);
-		buf = NULL;
-		}
-
-	return(buf);
-	}
-
-int BN_hex2bn(BIGNUM **bn, const char *a)
-	{
-	BIGNUM *ret=NULL;
-	BN_ULONG l=0;
-	int neg=0,h,m,i,j,k,c;
-	int num;
-
-	if ((a == NULL) || (*a == '\0')) return(0);
-
-	if (*a == '-') { neg=1; a++; }
-
-	for (i=0; isxdigit((unsigned char) a[i]); i++)
-		;
-
-	num=i+neg;
-	if (bn == NULL) return(num);
-
-	/* a is the start of the hex digits, and it is 'i' long */
-	if (*bn == NULL)
-		{
-		if ((ret=BN_new()) == NULL) return(0);
-		}
-	else
-		{
-		ret= *bn;
-		BN_zero(ret);
-		}
-
-	/* i is the number of hex digests; */
-	if (bn_expand(ret,i*4) == NULL) goto err;
-
-	j=i; /* least significant 'hex' */
-	m=0;
-	h=0;
-	while (j > 0)
-		{
-		m=((BN_BYTES*2) <= j)?(BN_BYTES*2):j;
-		l=0;
-		for (;;)
-			{
-			c=a[j-m];
-			if ((c >= '0') && (c <= '9')) k=c-'0';
-			else if ((c >= 'a') && (c <= 'f')) k=c-'a'+10;
-			else if ((c >= 'A') && (c <= 'F')) k=c-'A'+10;
-			else k=0; /* paranoia */
-			l=(l<<4)|k;
-
-			if (--m <= 0)
-				{
-				ret->d[h++]=l;
-				break;
-				}
-			}
-		j-=(BN_BYTES*2);
-		}
-	ret->top=h;
-	bn_correct_top(ret);
-	ret->neg=neg;
-
-	*bn=ret;
-	bn_check_top(ret);
-	return(num);
-err:
-	if (*bn == NULL) BN_free(ret);
-	return(0);
-	}
-
-int BN_dec2bn(BIGNUM **bn, const char *a)
-	{
-	BIGNUM *ret=NULL;
-	BN_ULONG l=0;
-	int neg=0,i,j;
-	int num;
-
-	if ((a == NULL) || (*a == '\0')) return(0);
-	if (*a == '-') { neg=1; a++; }
-
-	for (i=0; isdigit((unsigned char) a[i]); i++)
-		;
-
-	num=i+neg;
-	if (bn == NULL) return(num);
-
-	/* a is the start of the digits, and it is 'i' long.
-	 * We chop it into BN_DEC_NUM digits at a time */
-	if (*bn == NULL)
-		{
-		if ((ret=BN_new()) == NULL) return(0);
-		}
-	else
-		{
-		ret= *bn;
-		BN_zero(ret);
-		}
-
-	/* i is the number of digests, a bit of an over expand; */
-	if (bn_expand(ret,i*4) == NULL) goto err;
-
-	j=BN_DEC_NUM-(i%BN_DEC_NUM);
-	if (j == BN_DEC_NUM) j=0;
-	l=0;
-	while (*a)
-		{
-		l*=10;
-		l+= *a-'0';
-		a++;
-		if (++j == BN_DEC_NUM)
-			{
-			BN_mul_word(ret,BN_DEC_CONV);
-			BN_add_word(ret,l);
-			l=0;
-			j=0;
-			}
-		}
-	ret->neg=neg;
-
-	bn_correct_top(ret);
-	*bn=ret;
-	bn_check_top(ret);
-	return(num);
-err:
-	if (*bn == NULL) BN_free(ret);
-	return(0);
-	}
-
-#ifndef OPENSSL_NO_BIO
-#ifndef OPENSSL_NO_FP_API
-int BN_print_fp(FILE *fp, const BIGNUM *a)
-	{
-	BIO *b;
-	int ret;
-
-	if ((b=BIO_new(BIO_s_file())) == NULL)
-		return(0);
-	BIO_set_fp(b,fp,BIO_NOCLOSE);
-	ret=BN_print(b,a);
-	BIO_free(b);
-	return(ret);
-	}
-#endif
-
-int BN_print(BIO *bp, const BIGNUM *a)
-	{
-	int i,j,v,z=0;
-	int ret=0;
-
-	if ((a->neg) && (BIO_write(bp,"-",1) != 1)) goto end;
-	if (BN_is_zero(a) && (BIO_write(bp,"0",1) != 1)) goto end;
-	for (i=a->top-1; i >=0; i--)
-		{
-		for (j=BN_BITS2-4; j >= 0; j-=4)
-			{
-			/* strip leading zeros */
-			v=((int)(a->d[i]>>(long)j))&0x0f;
-			if (z || (v != 0))
-				{
-				if (BIO_write(bp,&(Hex[v]),1) != 1)
-					goto end;
-				z=1;
-				}
-			}
-		}
-	ret=1;
-end:
-	return(ret);
-	}
-#endif
diff --git a/crypto/openssl/crypto/bn/bn_rand.c b/crypto/openssl/crypto/bn/bn_rand.c
deleted file mode 100644
index f51830b12ba8..000000000000
--- a/crypto/openssl/crypto/bn/bn_rand.c
+++ /dev/null
@@ -1,305 +0,0 @@
-/* crypto/bn/bn_rand.c */
-/* Copyright (C) 1995-1998 Eric Young (eay@cryptsoft.com)
- * All rights reserved.
- *
- * This package is an SSL implementation written
- * by Eric Young (eay@cryptsoft.com).
- * The implementation was written so as to conform with Netscapes SSL.
- * 
- * This library is free for commercial and non-commercial use as long as
- * the following conditions are aheared to.  The following conditions
- * apply to all code found in this distribution, be it the RC4, RSA,
- * lhash, DES, etc., code; not just the SSL code.  The SSL documentation
- * included with this distribution is covered by the same copyright terms
- * except that the holder is Tim Hudson (tjh@cryptsoft.com).
- * 
- * Copyright remains Eric Young's, and as such any Copyright notices in
- * the code are not to be removed.
- * If this package is used in a product, Eric Young should be given attribution
- * as the author of the parts of the library used.
- * This can be in the form of a textual message at program startup or
- * in documentation (online or textual) provided with the package.
- * 
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions
- * are met:
- * 1. Redistributions of source code must retain the copyright
- *    notice, this list of conditions and the following disclaimer.
- * 2. Redistributions in binary form must reproduce the above copyright
- *    notice, this list of conditions and the following disclaimer in the
- *    documentation and/or other materials provided with the distribution.
- * 3. All advertising materials mentioning features or use of this software
- *    must display the following acknowledgement:
- *    "This product includes cryptographic software written by
- *     Eric Young (eay@cryptsoft.com)"
- *    The word 'cryptographic' can be left out if the rouines from the library
- *    being used are not cryptographic related :-).
- * 4. If you include any Windows specific code (or a derivative thereof) from 
- *    the apps directory (application code) you must include an acknowledgement:
- *    "This product includes software written by Tim Hudson (tjh@cryptsoft.com)"
- * 
- * THIS SOFTWARE IS PROVIDED BY ERIC YOUNG ``AS IS'' AND
- * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
- * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
- * ARE DISCLAIMED.  IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE
- * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
- * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
- * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
- * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
- * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
- * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
- * SUCH DAMAGE.
- * 
- * The licence and distribution terms for any publically available version or
- * derivative of this code cannot be changed.  i.e. this code cannot simply be
- * copied and put under another distribution licence
- * [including the GNU Public Licence.]
- */
-/* ====================================================================
- * Copyright (c) 1998-2001 The OpenSSL Project.  All rights reserved.
- *
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions
- * are met:
- *
- * 1. Redistributions of source code must retain the above copyright
- *    notice, this list of conditions and the following disclaimer. 
- *
- * 2. Redistributions in binary form must reproduce the above copyright
- *    notice, this list of conditions and the following disclaimer in
- *    the documentation and/or other materials provided with the
- *    distribution.
- *
- * 3. All advertising materials mentioning features or use of this
- *    software must display the following acknowledgment:
- *    "This product includes software developed by the OpenSSL Project
- *    for use in the OpenSSL Toolkit. (http://www.openssl.org/)"
- *
- * 4. The names "OpenSSL Toolkit" and "OpenSSL Project" must not be used to
- *    endorse or promote products derived from this software without
- *    prior written permission. For written permission, please contact
- *    openssl-core@openssl.org.
- *
- * 5. Products derived from this software may not be called "OpenSSL"
- *    nor may "OpenSSL" appear in their names without prior written
- *    permission of the OpenSSL Project.
- *
- * 6. Redistributions of any form whatsoever must retain the following
- *    acknowledgment:
- *    "This product includes software developed by the OpenSSL Project
- *    for use in the OpenSSL Toolkit (http://www.openssl.org/)"
- *
- * THIS SOFTWARE IS PROVIDED BY THE OpenSSL PROJECT ``AS IS'' AND ANY
- * EXPRESSED OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
- * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR
- * PURPOSE ARE DISCLAIMED.  IN NO EVENT SHALL THE OpenSSL PROJECT OR
- * ITS CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
- * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
- * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
- * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
- * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
- * STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
- * ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED
- * OF THE POSSIBILITY OF SUCH DAMAGE.
- * ====================================================================
- *
- * This product includes cryptographic software written by Eric Young
- * (eay@cryptsoft.com).  This product includes software written by Tim
- * Hudson (tjh@cryptsoft.com).
- *
- */
-
-#include <stdio.h>
-#include <time.h>
-#include "cryptlib.h"
-#include "bn_lcl.h"
-#include <openssl/rand.h>
-
-static int bnrand(int pseudorand, BIGNUM *rnd, int bits, int top, int bottom)
-	{
-	unsigned char *buf=NULL;
-	int ret=0,bit,bytes,mask;
-	time_t tim;
-
-	if (bits == 0)
-		{
-		BN_zero(rnd);
-		return 1;
-		}
-
-	bytes=(bits+7)/8;
-	bit=(bits-1)%8;
-	mask=0xff<<(bit+1);
-
-	buf=(unsigned char *)OPENSSL_malloc(bytes);
-	if (buf == NULL)
-		{
-		BNerr(BN_F_BNRAND,ERR_R_MALLOC_FAILURE);
-		goto err;
-		}
-
-	/* make a random number and set the top and bottom bits */
-	time(&tim);
-	RAND_add(&tim,sizeof(tim),0.0);
-
-	if (pseudorand)
-		{
-		if (RAND_pseudo_bytes(buf, bytes) == -1)
-			goto err;
-		}
-	else
-		{
-		if (RAND_bytes(buf, bytes) <= 0)
-			goto err;
-		}
-
-#if 1
-	if (pseudorand == 2)
-		{
-		/* generate patterns that are more likely to trigger BN
-		   library bugs */
-		int i;
-		unsigned char c;
-
-		for (i = 0; i < bytes; i++)
-			{
-			RAND_pseudo_bytes(&c, 1);
-			if (c >= 128 && i > 0)
-				buf[i] = buf[i-1];
-			else if (c < 42)
-				buf[i] = 0;
-			else if (c < 84)
-				buf[i] = 255;
-			}
-		}
-#endif
-
-	if (top != -1)
-		{
-		if (top)
-			{
-			if (bit == 0)
-				{
-				buf[0]=1;
-				buf[1]|=0x80;
-				}
-			else
-				{
-				buf[0]|=(3<<(bit-1));
-				}
-			}
-		else
-			{
-			buf[0]|=(1<<bit);
-			}
-		}
-	buf[0] &= ~mask;
-	if (bottom) /* set bottom bit if requested */
-		buf[bytes-1]|=1;
-	if (!BN_bin2bn(buf,bytes,rnd)) goto err;
-	ret=1;
-err:
-	if (buf != NULL)
-		{
-		OPENSSL_cleanse(buf,bytes);
-		OPENSSL_free(buf);
-		}
-	bn_check_top(rnd);
-	return(ret);
-	}
-
-int     BN_rand(BIGNUM *rnd, int bits, int top, int bottom)
-	{
-	return bnrand(0, rnd, bits, top, bottom);
-	}
-
-int     BN_pseudo_rand(BIGNUM *rnd, int bits, int top, int bottom)
-	{
-	return bnrand(1, rnd, bits, top, bottom);
-	}
-
-#if 1
-int     BN_bntest_rand(BIGNUM *rnd, int bits, int top, int bottom)
-	{
-	return bnrand(2, rnd, bits, top, bottom);
-	}
-#endif
-
-
-/* random number r:  0 <= r < range */
-static int bn_rand_range(int pseudo, BIGNUM *r, BIGNUM *range)
-	{
-	int (*bn_rand)(BIGNUM *, int, int, int) = pseudo ? BN_pseudo_rand : BN_rand;
-	int n;
-	int count = 100;
-
-	if (range->neg || BN_is_zero(range))
-		{
-		BNerr(BN_F_BN_RAND_RANGE, BN_R_INVALID_RANGE);
-		return 0;
-		}
-
-	n = BN_num_bits(range); /* n > 0 */
-
-	/* BN_is_bit_set(range, n - 1) always holds */
-
-	if (n == 1)
-		BN_zero(r);
-	else if (!BN_is_bit_set(range, n - 2) && !BN_is_bit_set(range, n - 3))
-		{
-		/* range = 100..._2,
-		 * so  3*range (= 11..._2)  is exactly one bit longer than  range */
-		do
-			{
-			if (!bn_rand(r, n + 1, -1, 0)) return 0;
-			/* If  r < 3*range,  use  r := r MOD range
-			 * (which is either  r, r - range,  or  r - 2*range).
-			 * Otherwise, iterate once more.
-			 * Since  3*range = 11..._2, each iteration succeeds with
-			 * probability >= .75. */
-			if (BN_cmp(r ,range) >= 0)
-				{
-				if (!BN_sub(r, r, range)) return 0;
-				if (BN_cmp(r, range) >= 0)
-					if (!BN_sub(r, r, range)) return 0;
-				}
-
-			if (!--count)
-				{
-				BNerr(BN_F_BN_RAND_RANGE, BN_R_TOO_MANY_ITERATIONS);
-				return 0;
-				}
-			
-			}
-		while (BN_cmp(r, range) >= 0);
-		}
-	else
-		{
-		do
-			{
-			/* range = 11..._2  or  range = 101..._2 */
-			if (!bn_rand(r, n, -1, 0)) return 0;
-
-			if (!--count)
-				{
-				BNerr(BN_F_BN_RAND_RANGE, BN_R_TOO_MANY_ITERATIONS);
-				return 0;
-				}
-			}
-		while (BN_cmp(r, range) >= 0);
-		}
-
-	bn_check_top(r);
-	return 1;
-	}
-
-
-int	BN_rand_range(BIGNUM *r, BIGNUM *range)
-	{
-	return bn_rand_range(0, r, range);
-	}
-
-int	BN_pseudo_rand_range(BIGNUM *r, BIGNUM *range)
-	{
-	return bn_rand_range(1, r, range);
-	}
diff --git a/crypto/openssl/crypto/bn/bn_recp.c b/crypto/openssl/crypto/bn/bn_recp.c
deleted file mode 100644
index 2e8efb8dae29..000000000000
--- a/crypto/openssl/crypto/bn/bn_recp.c
+++ /dev/null
@@ -1,234 +0,0 @@
-/* crypto/bn/bn_recp.c */
-/* Copyright (C) 1995-1998 Eric Young (eay@cryptsoft.com)
- * All rights reserved.
- *
- * This package is an SSL implementation written
- * by Eric Young (eay@cryptsoft.com).
- * The implementation was written so as to conform with Netscapes SSL.
- * 
- * This library is free for commercial and non-commercial use as long as
- * the following conditions are aheared to.  The following conditions
- * apply to all code found in this distribution, be it the RC4, RSA,
- * lhash, DES, etc., code; not just the SSL code.  The SSL documentation
- * included with this distribution is covered by the same copyright terms
- * except that the holder is Tim Hudson (tjh@cryptsoft.com).
- * 
- * Copyright remains Eric Young's, and as such any Copyright notices in
- * the code are not to be removed.
- * If this package is used in a product, Eric Young should be given attribution
- * as the author of the parts of the library used.
- * This can be in the form of a textual message at program startup or
- * in documentation (online or textual) provided with the package.
- * 
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions
- * are met:
- * 1. Redistributions of source code must retain the copyright
- *    notice, this list of conditions and the following disclaimer.
- * 2. Redistributions in binary form must reproduce the above copyright
- *    notice, this list of conditions and the following disclaimer in the
- *    documentation and/or other materials provided with the distribution.
- * 3. All advertising materials mentioning features or use of this software
- *    must display the following acknowledgement:
- *    "This product includes cryptographic software written by
- *     Eric Young (eay@cryptsoft.com)"
- *    The word 'cryptographic' can be left out if the rouines from the library
- *    being used are not cryptographic related :-).
- * 4. If you include any Windows specific code (or a derivative thereof) from 
- *    the apps directory (application code) you must include an acknowledgement:
- *    "This product includes software written by Tim Hudson (tjh@cryptsoft.com)"
- * 
- * THIS SOFTWARE IS PROVIDED BY ERIC YOUNG ``AS IS'' AND
- * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
- * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
- * ARE DISCLAIMED.  IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE
- * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
- * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
- * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
- * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
- * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
- * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
- * SUCH DAMAGE.
- * 
- * The licence and distribution terms for any publically available version or
- * derivative of this code cannot be changed.  i.e. this code cannot simply be
- * copied and put under another distribution licence
- * [including the GNU Public Licence.]
- */
-
-#include <stdio.h>
-#include "cryptlib.h"
-#include "bn_lcl.h"
-
-void BN_RECP_CTX_init(BN_RECP_CTX *recp)
-	{
-	BN_init(&(recp->N));
-	BN_init(&(recp->Nr));
-	recp->num_bits=0;
-	recp->flags=0;
-	}
-
-BN_RECP_CTX *BN_RECP_CTX_new(void)
-	{
-	BN_RECP_CTX *ret;
-
-	if ((ret=(BN_RECP_CTX *)OPENSSL_malloc(sizeof(BN_RECP_CTX))) == NULL)
-		return(NULL);
-
-	BN_RECP_CTX_init(ret);
-	ret->flags=BN_FLG_MALLOCED;
-	return(ret);
-	}
-
-void BN_RECP_CTX_free(BN_RECP_CTX *recp)
-	{
-	if(recp == NULL)
-	    return;
-
-	BN_free(&(recp->N));
-	BN_free(&(recp->Nr));
-	if (recp->flags & BN_FLG_MALLOCED)
-		OPENSSL_free(recp);
-	}
-
-int BN_RECP_CTX_set(BN_RECP_CTX *recp, const BIGNUM *d, BN_CTX *ctx)
-	{
-	if (!BN_copy(&(recp->N),d)) return 0;
-	BN_zero(&(recp->Nr));
-	recp->num_bits=BN_num_bits(d);
-	recp->shift=0;
-	return(1);
-	}
-
-int BN_mod_mul_reciprocal(BIGNUM *r, const BIGNUM *x, const BIGNUM *y,
-	BN_RECP_CTX *recp, BN_CTX *ctx)
-	{
-	int ret=0;
-	BIGNUM *a;
-	const BIGNUM *ca;
-
-	BN_CTX_start(ctx);
-	if ((a = BN_CTX_get(ctx)) == NULL) goto err;
-	if (y != NULL)
-		{
-		if (x == y)
-			{ if (!BN_sqr(a,x,ctx)) goto err; }
-		else
-			{ if (!BN_mul(a,x,y,ctx)) goto err; }
-		ca = a;
-		}
-	else
-		ca=x; /* Just do the mod */
-
-	ret = BN_div_recp(NULL,r,ca,recp,ctx);
-err:
-	BN_CTX_end(ctx);
-	bn_check_top(r);
-	return(ret);
-	}
-
-int BN_div_recp(BIGNUM *dv, BIGNUM *rem, const BIGNUM *m,
-	BN_RECP_CTX *recp, BN_CTX *ctx)
-	{
-	int i,j,ret=0;
-	BIGNUM *a,*b,*d,*r;
-
-	BN_CTX_start(ctx);
-	a=BN_CTX_get(ctx);
-	b=BN_CTX_get(ctx);
-	if (dv != NULL)
-		d=dv;
-	else
-		d=BN_CTX_get(ctx);
-	if (rem != NULL)
-		r=rem;
-	else
-		r=BN_CTX_get(ctx);
-	if (a == NULL || b == NULL || d == NULL || r == NULL) goto err;
-
-	if (BN_ucmp(m,&(recp->N)) < 0)
-		{
-		BN_zero(d);
-		if (!BN_copy(r,m)) return 0;
-		BN_CTX_end(ctx);
-		return(1);
-		}
-
-	/* We want the remainder
-	 * Given input of ABCDEF / ab
-	 * we need multiply ABCDEF by 3 digests of the reciprocal of ab
-	 *
-	 */
-
-	/* i := max(BN_num_bits(m), 2*BN_num_bits(N)) */
-	i=BN_num_bits(m);
-	j=recp->num_bits<<1;
-	if (j>i) i=j;
-
-	/* Nr := round(2^i / N) */
-	if (i != recp->shift)
-		recp->shift=BN_reciprocal(&(recp->Nr),&(recp->N),
-			i,ctx); /* BN_reciprocal returns i, or -1 for an error */
-	if (recp->shift == -1) goto err;
-
-	/* d := |round(round(m / 2^BN_num_bits(N)) * recp->Nr / 2^(i - BN_num_bits(N)))|
-	 *    = |round(round(m / 2^BN_num_bits(N)) * round(2^i / N) / 2^(i - BN_num_bits(N)))|
-	 *   <= |(m / 2^BN_num_bits(N)) * (2^i / N) * (2^BN_num_bits(N) / 2^i)|
-	 *    = |m/N|
-	 */
-	if (!BN_rshift(a,m,recp->num_bits)) goto err;
-	if (!BN_mul(b,a,&(recp->Nr),ctx)) goto err;
-	if (!BN_rshift(d,b,i-recp->num_bits)) goto err;
-	d->neg=0;
-
-	if (!BN_mul(b,&(recp->N),d,ctx)) goto err;
-	if (!BN_usub(r,m,b)) goto err;
-	r->neg=0;
-
-#if 1
-	j=0;
-	while (BN_ucmp(r,&(recp->N)) >= 0)
-		{
-		if (j++ > 2)
-			{
-			BNerr(BN_F_BN_DIV_RECP,BN_R_BAD_RECIPROCAL);
-			goto err;
-			}
-		if (!BN_usub(r,r,&(recp->N))) goto err;
-		if (!BN_add_word(d,1)) goto err;
-		}
-#endif
-
-	r->neg=BN_is_zero(r)?0:m->neg;
-	d->neg=m->neg^recp->N.neg;
-	ret=1;
-err:
-	BN_CTX_end(ctx);
-	bn_check_top(dv);
-	bn_check_top(rem);
-	return(ret);
-	} 
-
-/* len is the expected size of the result
- * We actually calculate with an extra word of precision, so
- * we can do faster division if the remainder is not required.
- */
-/* r := 2^len / m */
-int BN_reciprocal(BIGNUM *r, const BIGNUM *m, int len, BN_CTX *ctx)
-	{
-	int ret= -1;
-	BIGNUM *t;
-
-	BN_CTX_start(ctx);
-	if((t = BN_CTX_get(ctx)) == NULL) goto err;
-
-	if (!BN_set_bit(t,len)) goto err;
-
-	if (!BN_div(r,NULL,t,m,ctx)) goto err;
-
-	ret=len;
-err:
-	bn_check_top(r);
-	BN_CTX_end(ctx);
-	return(ret);
-	}
diff --git a/crypto/openssl/crypto/bn/bn_shift.c b/crypto/openssl/crypto/bn/bn_shift.c
deleted file mode 100644
index de9312dce231..000000000000
--- a/crypto/openssl/crypto/bn/bn_shift.c
+++ /dev/null
@@ -1,220 +0,0 @@
-/* crypto/bn/bn_shift.c */
-/* Copyright (C) 1995-1998 Eric Young (eay@cryptsoft.com)
- * All rights reserved.
- *
- * This package is an SSL implementation written
- * by Eric Young (eay@cryptsoft.com).
- * The implementation was written so as to conform with Netscapes SSL.
- * 
- * This library is free for commercial and non-commercial use as long as
- * the following conditions are aheared to.  The following conditions
- * apply to all code found in this distribution, be it the RC4, RSA,
- * lhash, DES, etc., code; not just the SSL code.  The SSL documentation
- * included with this distribution is covered by the same copyright terms
- * except that the holder is Tim Hudson (tjh@cryptsoft.com).
- * 
- * Copyright remains Eric Young's, and as such any Copyright notices in
- * the code are not to be removed.
- * If this package is used in a product, Eric Young should be given attribution
- * as the author of the parts of the library used.
- * This can be in the form of a textual message at program startup or
- * in documentation (online or textual) provided with the package.
- * 
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions
- * are met:
- * 1. Redistributions of source code must retain the copyright
- *    notice, this list of conditions and the following disclaimer.
- * 2. Redistributions in binary form must reproduce the above copyright
- *    notice, this list of conditions and the following disclaimer in the
- *    documentation and/or other materials provided with the distribution.
- * 3. All advertising materials mentioning features or use of this software
- *    must display the following acknowledgement:
- *    "This product includes cryptographic software written by
- *     Eric Young (eay@cryptsoft.com)"
- *    The word 'cryptographic' can be left out if the rouines from the library
- *    being used are not cryptographic related :-).
- * 4. If you include any Windows specific code (or a derivative thereof) from 
- *    the apps directory (application code) you must include an acknowledgement:
- *    "This product includes software written by Tim Hudson (tjh@cryptsoft.com)"
- * 
- * THIS SOFTWARE IS PROVIDED BY ERIC YOUNG ``AS IS'' AND
- * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
- * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
- * ARE DISCLAIMED.  IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE
- * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
- * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
- * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
- * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
- * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
- * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
- * SUCH DAMAGE.
- * 
- * The licence and distribution terms for any publically available version or
- * derivative of this code cannot be changed.  i.e. this code cannot simply be
- * copied and put under another distribution licence
- * [including the GNU Public Licence.]
- */
-
-#include <stdio.h>
-#include "cryptlib.h"
-#include "bn_lcl.h"
-
-int BN_lshift1(BIGNUM *r, const BIGNUM *a)
-	{
-	register BN_ULONG *ap,*rp,t,c;
-	int i;
-
-	bn_check_top(r);
-	bn_check_top(a);
-
-	if (r != a)
-		{
-		r->neg=a->neg;
-		if (bn_wexpand(r,a->top+1) == NULL) return(0);
-		r->top=a->top;
-		}
-	else
-		{
-		if (bn_wexpand(r,a->top+1) == NULL) return(0);
-		}
-	ap=a->d;
-	rp=r->d;
-	c=0;
-	for (i=0; i<a->top; i++)
-		{
-		t= *(ap++);
-		*(rp++)=((t<<1)|c)&BN_MASK2;
-		c=(t & BN_TBIT)?1:0;
-		}
-	if (c)
-		{
-		*rp=1;
-		r->top++;
-		}
-	bn_check_top(r);
-	return(1);
-	}
-
-int BN_rshift1(BIGNUM *r, const BIGNUM *a)
-	{
-	BN_ULONG *ap,*rp,t,c;
-	int i;
-
-	bn_check_top(r);
-	bn_check_top(a);
-
-	if (BN_is_zero(a))
-		{
-		BN_zero(r);
-		return(1);
-		}
-	if (a != r)
-		{
-		if (bn_wexpand(r,a->top) == NULL) return(0);
-		r->top=a->top;
-		r->neg=a->neg;
-		}
-	ap=a->d;
-	rp=r->d;
-	c=0;
-	for (i=a->top-1; i>=0; i--)
-		{
-		t=ap[i];
-		rp[i]=((t>>1)&BN_MASK2)|c;
-		c=(t&1)?BN_TBIT:0;
-		}
-	bn_correct_top(r);
-	bn_check_top(r);
-	return(1);
-	}
-
-int BN_lshift(BIGNUM *r, const BIGNUM *a, int n)
-	{
-	int i,nw,lb,rb;
-	BN_ULONG *t,*f;
-	BN_ULONG l;
-
-	bn_check_top(r);
-	bn_check_top(a);
-
-	r->neg=a->neg;
-	nw=n/BN_BITS2;
-	if (bn_wexpand(r,a->top+nw+1) == NULL) return(0);
-	lb=n%BN_BITS2;
-	rb=BN_BITS2-lb;
-	f=a->d;
-	t=r->d;
-	t[a->top+nw]=0;
-	if (lb == 0)
-		for (i=a->top-1; i>=0; i--)
-			t[nw+i]=f[i];
-	else
-		for (i=a->top-1; i>=0; i--)
-			{
-			l=f[i];
-			t[nw+i+1]|=(l>>rb)&BN_MASK2;
-			t[nw+i]=(l<<lb)&BN_MASK2;
-			}
-	memset(t,0,nw*sizeof(t[0]));
-/*	for (i=0; i<nw; i++)
-		t[i]=0;*/
-	r->top=a->top+nw+1;
-	bn_correct_top(r);
-	bn_check_top(r);
-	return(1);
-	}
-
-int BN_rshift(BIGNUM *r, const BIGNUM *a, int n)
-	{
-	int i,j,nw,lb,rb;
-	BN_ULONG *t,*f;
-	BN_ULONG l,tmp;
-
-	bn_check_top(r);
-	bn_check_top(a);
-
-	nw=n/BN_BITS2;
-	rb=n%BN_BITS2;
-	lb=BN_BITS2-rb;
-	if (nw > a->top || a->top == 0)
-		{
-		BN_zero(r);
-		return(1);
-		}
-	if (r != a)
-		{
-		r->neg=a->neg;
-		if (bn_wexpand(r,a->top-nw+1) == NULL) return(0);
-		}
-	else
-		{
-		if (n == 0)
-			return 1; /* or the copying loop will go berserk */
-		}
-
-	f= &(a->d[nw]);
-	t=r->d;
-	j=a->top-nw;
-	r->top=j;
-
-	if (rb == 0)
-		{
-		for (i=j; i != 0; i--)
-			*(t++)= *(f++);
-		}
-	else
-		{
-		l= *(f++);
-		for (i=j-1; i != 0; i--)
-			{
-			tmp =(l>>rb)&BN_MASK2;
-			l= *(f++);
-			*(t++) =(tmp|(l<<lb))&BN_MASK2;
-			}
-		*(t++) =(l>>rb)&BN_MASK2;
-		}
-	bn_correct_top(r);
-	bn_check_top(r);
-	return(1);
-	}
diff --git a/crypto/openssl/crypto/bn/bn_sqr.c b/crypto/openssl/crypto/bn/bn_sqr.c
deleted file mode 100644
index 270d0cd348b9..000000000000
--- a/crypto/openssl/crypto/bn/bn_sqr.c
+++ /dev/null
@@ -1,294 +0,0 @@
-/* crypto/bn/bn_sqr.c */
-/* Copyright (C) 1995-1998 Eric Young (eay@cryptsoft.com)
- * All rights reserved.
- *
- * This package is an SSL implementation written
- * by Eric Young (eay@cryptsoft.com).
- * The implementation was written so as to conform with Netscapes SSL.
- * 
- * This library is free for commercial and non-commercial use as long as
- * the following conditions are aheared to.  The following conditions
- * apply to all code found in this distribution, be it the RC4, RSA,
- * lhash, DES, etc., code; not just the SSL code.  The SSL documentation
- * included with this distribution is covered by the same copyright terms
- * except that the holder is Tim Hudson (tjh@cryptsoft.com).
- * 
- * Copyright remains Eric Young's, and as such any Copyright notices in
- * the code are not to be removed.
- * If this package is used in a product, Eric Young should be given attribution
- * as the author of the parts of the library used.
- * This can be in the form of a textual message at program startup or
- * in documentation (online or textual) provided with the package.
- * 
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions
- * are met:
- * 1. Redistributions of source code must retain the copyright
- *    notice, this list of conditions and the following disclaimer.
- * 2. Redistributions in binary form must reproduce the above copyright
- *    notice, this list of conditions and the following disclaimer in the
- *    documentation and/or other materials provided with the distribution.
- * 3. All advertising materials mentioning features or use of this software
- *    must display the following acknowledgement:
- *    "This product includes cryptographic software written by
- *     Eric Young (eay@cryptsoft.com)"
- *    The word 'cryptographic' can be left out if the rouines from the library
- *    being used are not cryptographic related :-).
- * 4. If you include any Windows specific code (or a derivative thereof) from 
- *    the apps directory (application code) you must include an acknowledgement:
- *    "This product includes software written by Tim Hudson (tjh@cryptsoft.com)"
- * 
- * THIS SOFTWARE IS PROVIDED BY ERIC YOUNG ``AS IS'' AND
- * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
- * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
- * ARE DISCLAIMED.  IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE
- * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
- * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
- * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
- * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
- * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
- * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
- * SUCH DAMAGE.
- * 
- * The licence and distribution terms for any publically available version or
- * derivative of this code cannot be changed.  i.e. this code cannot simply be
- * copied and put under another distribution licence
- * [including the GNU Public Licence.]
- */
-
-#include <stdio.h>
-#include "cryptlib.h"
-#include "bn_lcl.h"
-
-/* r must not be a */
-/* I've just gone over this and it is now %20 faster on x86 - eay - 27 Jun 96 */
-int BN_sqr(BIGNUM *r, const BIGNUM *a, BN_CTX *ctx)
-	{
-	int max,al;
-	int ret = 0;
-	BIGNUM *tmp,*rr;
-
-#ifdef BN_COUNT
-	fprintf(stderr,"BN_sqr %d * %d\n",a->top,a->top);
-#endif
-	bn_check_top(a);
-
-	al=a->top;
-	if (al <= 0)
-		{
-		r->top=0;
-		return 1;
-		}
-
-	BN_CTX_start(ctx);
-	rr=(a != r) ? r : BN_CTX_get(ctx);
-	tmp=BN_CTX_get(ctx);
-	if (!rr || !tmp) goto err;
-
-	max = 2 * al; /* Non-zero (from above) */
-	if (bn_wexpand(rr,max) == NULL) goto err;
-
-	if (al == 4)
-		{
-#ifndef BN_SQR_COMBA
-		BN_ULONG t[8];
-		bn_sqr_normal(rr->d,a->d,4,t);
-#else
-		bn_sqr_comba4(rr->d,a->d);
-#endif
-		}
-	else if (al == 8)
-		{
-#ifndef BN_SQR_COMBA
-		BN_ULONG t[16];
-		bn_sqr_normal(rr->d,a->d,8,t);
-#else
-		bn_sqr_comba8(rr->d,a->d);
-#endif
-		}
-	else 
-		{
-#if defined(BN_RECURSION)
-		if (al < BN_SQR_RECURSIVE_SIZE_NORMAL)
-			{
-			BN_ULONG t[BN_SQR_RECURSIVE_SIZE_NORMAL*2];
-			bn_sqr_normal(rr->d,a->d,al,t);
-			}
-		else
-			{
-			int j,k;
-
-			j=BN_num_bits_word((BN_ULONG)al);
-			j=1<<(j-1);
-			k=j+j;
-			if (al == j)
-				{
-				if (bn_wexpand(tmp,k*2) == NULL) goto err;
-				bn_sqr_recursive(rr->d,a->d,al,tmp->d);
-				}
-			else
-				{
-				if (bn_wexpand(tmp,max) == NULL) goto err;
-				bn_sqr_normal(rr->d,a->d,al,tmp->d);
-				}
-			}
-#else
-		if (bn_wexpand(tmp,max) == NULL) goto err;
-		bn_sqr_normal(rr->d,a->d,al,tmp->d);
-#endif
-		}
-
-	rr->neg=0;
-	/* If the most-significant half of the top word of 'a' is zero, then
-	 * the square of 'a' will max-1 words. */
-	if(a->d[al - 1] == (a->d[al - 1] & BN_MASK2l))
-		rr->top = max - 1;
-	else
-		rr->top = max;
-	if (rr != r) BN_copy(r,rr);
-	ret = 1;
- err:
-	bn_check_top(rr);
-	bn_check_top(tmp);
-	BN_CTX_end(ctx);
-	return(ret);
-	}
-
-/* tmp must have 2*n words */
-void bn_sqr_normal(BN_ULONG *r, const BN_ULONG *a, int n, BN_ULONG *tmp)
-	{
-	int i,j,max;
-	const BN_ULONG *ap;
-	BN_ULONG *rp;
-
-	max=n*2;
-	ap=a;
-	rp=r;
-	rp[0]=rp[max-1]=0;
-	rp++;
-	j=n;
-
-	if (--j > 0)
-		{
-		ap++;
-		rp[j]=bn_mul_words(rp,ap,j,ap[-1]);
-		rp+=2;
-		}
-
-	for (i=n-2; i>0; i--)
-		{
-		j--;
-		ap++;
-		rp[j]=bn_mul_add_words(rp,ap,j,ap[-1]);
-		rp+=2;
-		}
-
-	bn_add_words(r,r,r,max);
-
-	/* There will not be a carry */
-
-	bn_sqr_words(tmp,a,n);
-
-	bn_add_words(r,r,tmp,max);
-	}
-
-#ifdef BN_RECURSION
-/* r is 2*n words in size,
- * a and b are both n words in size.    (There's not actually a 'b' here ...)
- * n must be a power of 2.
- * We multiply and return the result.
- * t must be 2*n words in size
- * We calculate
- * a[0]*b[0]
- * a[0]*b[0]+a[1]*b[1]+(a[0]-a[1])*(b[1]-b[0])
- * a[1]*b[1]
- */
-void bn_sqr_recursive(BN_ULONG *r, const BN_ULONG *a, int n2, BN_ULONG *t)
-	{
-	int n=n2/2;
-	int zero,c1;
-	BN_ULONG ln,lo,*p;
-
-#ifdef BN_COUNT
-	fprintf(stderr," bn_sqr_recursive %d * %d\n",n2,n2);
-#endif
-	if (n2 == 4)
-		{
-#ifndef BN_SQR_COMBA
-		bn_sqr_normal(r,a,4,t);
-#else
-		bn_sqr_comba4(r,a);
-#endif
-		return;
-		}
-	else if (n2 == 8)
-		{
-#ifndef BN_SQR_COMBA
-		bn_sqr_normal(r,a,8,t);
-#else
-		bn_sqr_comba8(r,a);
-#endif
-		return;
-		}
-	if (n2 < BN_SQR_RECURSIVE_SIZE_NORMAL)
-		{
-		bn_sqr_normal(r,a,n2,t);
-		return;
-		}
-	/* r=(a[0]-a[1])*(a[1]-a[0]) */
-	c1=bn_cmp_words(a,&(a[n]),n);
-	zero=0;
-	if (c1 > 0)
-		bn_sub_words(t,a,&(a[n]),n);
-	else if (c1 < 0)
-		bn_sub_words(t,&(a[n]),a,n);
-	else
-		zero=1;
-
-	/* The result will always be negative unless it is zero */
-	p= &(t[n2*2]);
-
-	if (!zero)
-		bn_sqr_recursive(&(t[n2]),t,n,p);
-	else
-		memset(&(t[n2]),0,n2*sizeof(BN_ULONG));
-	bn_sqr_recursive(r,a,n,p);
-	bn_sqr_recursive(&(r[n2]),&(a[n]),n,p);
-
-	/* t[32] holds (a[0]-a[1])*(a[1]-a[0]), it is negative or zero
-	 * r[10] holds (a[0]*b[0])
-	 * r[32] holds (b[1]*b[1])
-	 */
-
-	c1=(int)(bn_add_words(t,r,&(r[n2]),n2));
-
-	/* t[32] is negative */
-	c1-=(int)(bn_sub_words(&(t[n2]),t,&(t[n2]),n2));
-
-	/* t[32] holds (a[0]-a[1])*(a[1]-a[0])+(a[0]*a[0])+(a[1]*a[1])
-	 * r[10] holds (a[0]*a[0])
-	 * r[32] holds (a[1]*a[1])
-	 * c1 holds the carry bits
-	 */
-	c1+=(int)(bn_add_words(&(r[n]),&(r[n]),&(t[n2]),n2));
-	if (c1)
-		{
-		p= &(r[n+n2]);
-		lo= *p;
-		ln=(lo+c1)&BN_MASK2;
-		*p=ln;
-
-		/* The overflow will stop before we over write
-		 * words we should not overwrite */
-		if (ln < (BN_ULONG)c1)
-			{
-			do	{
-				p++;
-				lo= *p;
-				ln=(lo+1)&BN_MASK2;
-				*p=ln;
-				} while (ln == 0);
-			}
-		}
-	}
-#endif
diff --git a/crypto/openssl/crypto/bn/bn_sqrt.c b/crypto/openssl/crypto/bn/bn_sqrt.c
deleted file mode 100644
index 6beaf9e5e5dd..000000000000
--- a/crypto/openssl/crypto/bn/bn_sqrt.c
+++ /dev/null
@@ -1,393 +0,0 @@
-/* crypto/bn/bn_sqrt.c */
-/* Written by Lenka Fibikova <fibikova@exp-math.uni-essen.de>
- * and Bodo Moeller for the OpenSSL project. */
-/* ====================================================================
- * Copyright (c) 1998-2000 The OpenSSL Project.  All rights reserved.
- *
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions
- * are met:
- *
- * 1. Redistributions of source code must retain the above copyright
- *    notice, this list of conditions and the following disclaimer. 
- *
- * 2. Redistributions in binary form must reproduce the above copyright
- *    notice, this list of conditions and the following disclaimer in
- *    the documentation and/or other materials provided with the
- *    distribution.
- *
- * 3. All advertising materials mentioning features or use of this
- *    software must display the following acknowledgment:
- *    "This product includes software developed by the OpenSSL Project
- *    for use in the OpenSSL Toolkit. (http://www.openssl.org/)"
- *
- * 4. The names "OpenSSL Toolkit" and "OpenSSL Project" must not be used to
- *    endorse or promote products derived from this software without
- *    prior written permission. For written permission, please contact
- *    openssl-core@openssl.org.
- *
- * 5. Products derived from this software may not be called "OpenSSL"
- *    nor may "OpenSSL" appear in their names without prior written
- *    permission of the OpenSSL Project.
- *
- * 6. Redistributions of any form whatsoever must retain the following
- *    acknowledgment:
- *    "This product includes software developed by the OpenSSL Project
- *    for use in the OpenSSL Toolkit (http://www.openssl.org/)"
- *
- * THIS SOFTWARE IS PROVIDED BY THE OpenSSL PROJECT ``AS IS'' AND ANY
- * EXPRESSED OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
- * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR
- * PURPOSE ARE DISCLAIMED.  IN NO EVENT SHALL THE OpenSSL PROJECT OR
- * ITS CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
- * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
- * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
- * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
- * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
- * STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
- * ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED
- * OF THE POSSIBILITY OF SUCH DAMAGE.
- * ====================================================================
- *
- * This product includes cryptographic software written by Eric Young
- * (eay@cryptsoft.com).  This product includes software written by Tim
- * Hudson (tjh@cryptsoft.com).
- *
- */
-
-#include "cryptlib.h"
-#include "bn_lcl.h"
-
-
-BIGNUM *BN_mod_sqrt(BIGNUM *in, const BIGNUM *a, const BIGNUM *p, BN_CTX *ctx) 
-/* Returns 'ret' such that
- *      ret^2 == a (mod p),
- * using the Tonelli/Shanks algorithm (cf. Henri Cohen, "A Course
- * in Algebraic Computational Number Theory", algorithm 1.5.1).
- * 'p' must be prime!
- */
-	{
-	BIGNUM *ret = in;
-	int err = 1;
-	int r;
-	BIGNUM *A, *b, *q, *t, *x, *y;
-	int e, i, j;
-	
-	if (!BN_is_odd(p) || BN_abs_is_word(p, 1))
-		{
-		if (BN_abs_is_word(p, 2))
-			{
-			if (ret == NULL)
-				ret = BN_new();
-			if (ret == NULL)
-				goto end;
-			if (!BN_set_word(ret, BN_is_bit_set(a, 0)))
-				{
-				if (ret != in)
-					BN_free(ret);
-				return NULL;
-				}
-			bn_check_top(ret);
-			return ret;
-			}
-
-		BNerr(BN_F_BN_MOD_SQRT, BN_R_P_IS_NOT_PRIME);
-		return(NULL);
-		}
-
-	if (BN_is_zero(a) || BN_is_one(a))
-		{
-		if (ret == NULL)
-			ret = BN_new();
-		if (ret == NULL)
-			goto end;
-		if (!BN_set_word(ret, BN_is_one(a)))
-			{
-			if (ret != in)
-				BN_free(ret);
-			return NULL;
-			}
-		bn_check_top(ret);
-		return ret;
-		}
-
-	BN_CTX_start(ctx);
-	A = BN_CTX_get(ctx);
-	b = BN_CTX_get(ctx);
-	q = BN_CTX_get(ctx);
-	t = BN_CTX_get(ctx);
-	x = BN_CTX_get(ctx);
-	y = BN_CTX_get(ctx);
-	if (y == NULL) goto end;
-	
-	if (ret == NULL)
-		ret = BN_new();
-	if (ret == NULL) goto end;
-
-	/* A = a mod p */
-	if (!BN_nnmod(A, a, p, ctx)) goto end;
-
-	/* now write  |p| - 1  as  2^e*q  where  q  is odd */
-	e = 1;
-	while (!BN_is_bit_set(p, e))
-		e++;
-	/* we'll set  q  later (if needed) */
-
-	if (e == 1)
-		{
-		/* The easy case:  (|p|-1)/2  is odd, so 2 has an inverse
-		 * modulo  (|p|-1)/2,  and square roots can be computed
-		 * directly by modular exponentiation.
-		 * We have
-		 *     2 * (|p|+1)/4 == 1   (mod (|p|-1)/2),
-		 * so we can use exponent  (|p|+1)/4,  i.e.  (|p|-3)/4 + 1.
-		 */
-		if (!BN_rshift(q, p, 2)) goto end;
-		q->neg = 0;
-		if (!BN_add_word(q, 1)) goto end;
-		if (!BN_mod_exp(ret, A, q, p, ctx)) goto end;
-		err = 0;
-		goto vrfy;
-		}
-	
-	if (e == 2)
-		{
-		/* |p| == 5  (mod 8)
-		 *
-		 * In this case  2  is always a non-square since
-		 * Legendre(2,p) = (-1)^((p^2-1)/8)  for any odd prime.
-		 * So if  a  really is a square, then  2*a  is a non-square.
-		 * Thus for
-		 *      b := (2*a)^((|p|-5)/8),
-		 *      i := (2*a)*b^2
-		 * we have
-		 *     i^2 = (2*a)^((1 + (|p|-5)/4)*2)
-		 *         = (2*a)^((p-1)/2)
-		 *         = -1;
-		 * so if we set
-		 *      x := a*b*(i-1),
-		 * then
-		 *     x^2 = a^2 * b^2 * (i^2 - 2*i + 1)
-		 *         = a^2 * b^2 * (-2*i)
-		 *         = a*(-i)*(2*a*b^2)
-		 *         = a*(-i)*i
-		 *         = a.
-		 *
-		 * (This is due to A.O.L. Atkin, 
-		 * <URL: http://listserv.nodak.edu/scripts/wa.exe?A2=ind9211&L=nmbrthry&O=T&P=562>,
-		 * November 1992.)
-		 */
-
-		/* t := 2*a */
-		if (!BN_mod_lshift1_quick(t, A, p)) goto end;
-
-		/* b := (2*a)^((|p|-5)/8) */
-		if (!BN_rshift(q, p, 3)) goto end;
-		q->neg = 0;
-		if (!BN_mod_exp(b, t, q, p, ctx)) goto end;
-
-		/* y := b^2 */
-		if (!BN_mod_sqr(y, b, p, ctx)) goto end;
-
-		/* t := (2*a)*b^2 - 1*/
-		if (!BN_mod_mul(t, t, y, p, ctx)) goto end;
-		if (!BN_sub_word(t, 1)) goto end;
-
-		/* x = a*b*t */
-		if (!BN_mod_mul(x, A, b, p, ctx)) goto end;
-		if (!BN_mod_mul(x, x, t, p, ctx)) goto end;
-
-		if (!BN_copy(ret, x)) goto end;
-		err = 0;
-		goto vrfy;
-		}
-	
-	/* e > 2, so we really have to use the Tonelli/Shanks algorithm.
-	 * First, find some  y  that is not a square. */
-	if (!BN_copy(q, p)) goto end; /* use 'q' as temp */
-	q->neg = 0;
-	i = 2;
-	do
-		{
-		/* For efficiency, try small numbers first;
-		 * if this fails, try random numbers.
-		 */
-		if (i < 22)
-			{
-			if (!BN_set_word(y, i)) goto end;
-			}
-		else
-			{
-			if (!BN_pseudo_rand(y, BN_num_bits(p), 0, 0)) goto end;
-			if (BN_ucmp(y, p) >= 0)
-				{
-				if (!(p->neg ? BN_add : BN_sub)(y, y, p)) goto end;
-				}
-			/* now 0 <= y < |p| */
-			if (BN_is_zero(y))
-				if (!BN_set_word(y, i)) goto end;
-			}
-		
-		r = BN_kronecker(y, q, ctx); /* here 'q' is |p| */
-		if (r < -1) goto end;
-		if (r == 0)
-			{
-			/* m divides p */
-			BNerr(BN_F_BN_MOD_SQRT, BN_R_P_IS_NOT_PRIME);
-			goto end;
-			}
-		}
-	while (r == 1 && ++i < 82);
-	
-	if (r != -1)
-		{
-		/* Many rounds and still no non-square -- this is more likely
-		 * a bug than just bad luck.
-		 * Even if  p  is not prime, we should have found some  y
-		 * such that r == -1.
-		 */
-		BNerr(BN_F_BN_MOD_SQRT, BN_R_TOO_MANY_ITERATIONS);
-		goto end;
-		}
-
-	/* Here's our actual 'q': */
-	if (!BN_rshift(q, q, e)) goto end;
-
-	/* Now that we have some non-square, we can find an element
-	 * of order  2^e  by computing its q'th power. */
-	if (!BN_mod_exp(y, y, q, p, ctx)) goto end;
-	if (BN_is_one(y))
-		{
-		BNerr(BN_F_BN_MOD_SQRT, BN_R_P_IS_NOT_PRIME);
-		goto end;
-		}
-
-	/* Now we know that (if  p  is indeed prime) there is an integer
-	 * k,  0 <= k < 2^e,  such that
-	 *
-	 *      a^q * y^k == 1   (mod p).
-	 *
-	 * As  a^q  is a square and  y  is not,  k  must be even.
-	 * q+1  is even, too, so there is an element
-	 *
-	 *     X := a^((q+1)/2) * y^(k/2),
-	 *
-	 * and it satisfies
-	 *
-	 *     X^2 = a^q * a     * y^k
-	 *         = a,
-	 *
-	 * so it is the square root that we are looking for.
-	 */
-	
-	/* t := (q-1)/2  (note that  q  is odd) */
-	if (!BN_rshift1(t, q)) goto end;
-	
-	/* x := a^((q-1)/2) */
-	if (BN_is_zero(t)) /* special case: p = 2^e + 1 */
-		{
-		if (!BN_nnmod(t, A, p, ctx)) goto end;
-		if (BN_is_zero(t))
-			{
-			/* special case: a == 0  (mod p) */
-			BN_zero(ret);
-			err = 0;
-			goto end;
-			}
-		else
-			if (!BN_one(x)) goto end;
-		}
-	else
-		{
-		if (!BN_mod_exp(x, A, t, p, ctx)) goto end;
-		if (BN_is_zero(x))
-			{
-			/* special case: a == 0  (mod p) */
-			BN_zero(ret);
-			err = 0;
-			goto end;
-			}
-		}
-
-	/* b := a*x^2  (= a^q) */
-	if (!BN_mod_sqr(b, x, p, ctx)) goto end;
-	if (!BN_mod_mul(b, b, A, p, ctx)) goto end;
-	
-	/* x := a*x    (= a^((q+1)/2)) */
-	if (!BN_mod_mul(x, x, A, p, ctx)) goto end;
-
-	while (1)
-		{
-		/* Now  b  is  a^q * y^k  for some even  k  (0 <= k < 2^E
-		 * where  E  refers to the original value of  e,  which we
-		 * don't keep in a variable),  and  x  is  a^((q+1)/2) * y^(k/2).
-		 *
-		 * We have  a*b = x^2,
-		 *    y^2^(e-1) = -1,
-		 *    b^2^(e-1) = 1.
-		 */
-
-		if (BN_is_one(b))
-			{
-			if (!BN_copy(ret, x)) goto end;
-			err = 0;
-			goto vrfy;
-			}
-
-
-		/* find smallest  i  such that  b^(2^i) = 1 */
-		i = 1;
-		if (!BN_mod_sqr(t, b, p, ctx)) goto end;
-		while (!BN_is_one(t))
-			{
-			i++;
-			if (i == e)
-				{
-				BNerr(BN_F_BN_MOD_SQRT, BN_R_NOT_A_SQUARE);
-				goto end;
-				}
-			if (!BN_mod_mul(t, t, t, p, ctx)) goto end;
-			}
-		
-
-		/* t := y^2^(e - i - 1) */
-		if (!BN_copy(t, y)) goto end;
-		for (j = e - i - 1; j > 0; j--)
-			{
-			if (!BN_mod_sqr(t, t, p, ctx)) goto end;
-			}
-		if (!BN_mod_mul(y, t, t, p, ctx)) goto end;
-		if (!BN_mod_mul(x, x, t, p, ctx)) goto end;
-		if (!BN_mod_mul(b, b, y, p, ctx)) goto end;
-		e = i;
-		}
-
- vrfy:
-	if (!err)
-		{
-		/* verify the result -- the input might have been not a square
-		 * (test added in 0.9.8) */
-		
-		if (!BN_mod_sqr(x, ret, p, ctx))
-			err = 1;
-		
-		if (!err && 0 != BN_cmp(x, A))
-			{
-			BNerr(BN_F_BN_MOD_SQRT, BN_R_NOT_A_SQUARE);
-			err = 1;
-			}
-		}
-
- end:
-	if (err)
-		{
-		if (ret != NULL && ret != in)
-			{
-			BN_clear_free(ret);
-			}
-		ret = NULL;
-		}
-	BN_CTX_end(ctx);
-	bn_check_top(ret);
-	return ret;
-	}
diff --git a/crypto/openssl/crypto/bn/bn_word.c b/crypto/openssl/crypto/bn/bn_word.c
deleted file mode 100644
index ee7b87c45ccd..000000000000
--- a/crypto/openssl/crypto/bn/bn_word.c
+++ /dev/null
@@ -1,247 +0,0 @@
-/* crypto/bn/bn_word.c */
-/* Copyright (C) 1995-1998 Eric Young (eay@cryptsoft.com)
- * All rights reserved.
- *
- * This package is an SSL implementation written
- * by Eric Young (eay@cryptsoft.com).
- * The implementation was written so as to conform with Netscapes SSL.
- * 
- * This library is free for commercial and non-commercial use as long as
- * the following conditions are aheared to.  The following conditions
- * apply to all code found in this distribution, be it the RC4, RSA,
- * lhash, DES, etc., code; not just the SSL code.  The SSL documentation
- * included with this distribution is covered by the same copyright terms
- * except that the holder is Tim Hudson (tjh@cryptsoft.com).
- * 
- * Copyright remains Eric Young's, and as such any Copyright notices in
- * the code are not to be removed.
- * If this package is used in a product, Eric Young should be given attribution
- * as the author of the parts of the library used.
- * This can be in the form of a textual message at program startup or
- * in documentation (online or textual) provided with the package.
- * 
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions
- * are met:
- * 1. Redistributions of source code must retain the copyright
- *    notice, this list of conditions and the following disclaimer.
- * 2. Redistributions in binary form must reproduce the above copyright
- *    notice, this list of conditions and the following disclaimer in the
- *    documentation and/or other materials provided with the distribution.
- * 3. All advertising materials mentioning features or use of this software
- *    must display the following acknowledgement:
- *    "This product includes cryptographic software written by
- *     Eric Young (eay@cryptsoft.com)"
- *    The word 'cryptographic' can be left out if the rouines from the library
- *    being used are not cryptographic related :-).
- * 4. If you include any Windows specific code (or a derivative thereof) from 
- *    the apps directory (application code) you must include an acknowledgement:
- *    "This product includes software written by Tim Hudson (tjh@cryptsoft.com)"
- * 
- * THIS SOFTWARE IS PROVIDED BY ERIC YOUNG ``AS IS'' AND
- * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
- * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
- * ARE DISCLAIMED.  IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE
- * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
- * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
- * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
- * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
- * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
- * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
- * SUCH DAMAGE.
- * 
- * The licence and distribution terms for any publically available version or
- * derivative of this code cannot be changed.  i.e. this code cannot simply be
- * copied and put under another distribution licence
- * [including the GNU Public Licence.]
- */
-
-#include <stdio.h>
-#include "cryptlib.h"
-#include "bn_lcl.h"
-
-BN_ULONG BN_mod_word(const BIGNUM *a, BN_ULONG w)
-	{
-#ifndef BN_LLONG
-	BN_ULONG ret=0;
-#else
-	BN_ULLONG ret=0;
-#endif
-	int i;
-
-	if (w == 0)
-		return (BN_ULONG)-1;
-
-	bn_check_top(a);
-	w&=BN_MASK2;
-	for (i=a->top-1; i>=0; i--)
-		{
-#ifndef BN_LLONG
-		ret=((ret<<BN_BITS4)|((a->d[i]>>BN_BITS4)&BN_MASK2l))%w;
-		ret=((ret<<BN_BITS4)|(a->d[i]&BN_MASK2l))%w;
-#else
-		ret=(BN_ULLONG)(((ret<<(BN_ULLONG)BN_BITS2)|a->d[i])%
-			(BN_ULLONG)w);
-#endif
-		}
-	return((BN_ULONG)ret);
-	}
-
-BN_ULONG BN_div_word(BIGNUM *a, BN_ULONG w)
-	{
-	BN_ULONG ret = 0;
-	int i, j;
-
-	bn_check_top(a);
-	w &= BN_MASK2;
-
-	if (!w)
-		/* actually this an error (division by zero) */
-		return (BN_ULONG)-1;
-	if (a->top == 0)
-		return 0;
-
-	/* normalize input (so bn_div_words doesn't complain) */
-	j = BN_BITS2 - BN_num_bits_word(w);
-	w <<= j;
-	if (!BN_lshift(a, a, j))
-		return (BN_ULONG)-1;
-
-	for (i=a->top-1; i>=0; i--)
-		{
-		BN_ULONG l,d;
-		
-		l=a->d[i];
-		d=bn_div_words(ret,l,w);
-		ret=(l-((d*w)&BN_MASK2))&BN_MASK2;
-		a->d[i]=d;
-		}
-	if ((a->top > 0) && (a->d[a->top-1] == 0))
-		a->top--;
-	ret >>= j;
-	bn_check_top(a);
-	return(ret);
-	}
-
-int BN_add_word(BIGNUM *a, BN_ULONG w)
-	{
-	BN_ULONG l;
-	int i;
-
-	bn_check_top(a);
-	w &= BN_MASK2;
-
-	/* degenerate case: w is zero */
-	if (!w) return 1;
-	/* degenerate case: a is zero */
-	if(BN_is_zero(a)) return BN_set_word(a, w);
-	/* handle 'a' when negative */
-	if (a->neg)
-		{
-		a->neg=0;
-		i=BN_sub_word(a,w);
-		if (!BN_is_zero(a))
-			a->neg=!(a->neg);
-		return(i);
-		}
-	/* Only expand (and risk failing) if it's possibly necessary */
-	if (((BN_ULONG)(a->d[a->top - 1] + 1) == 0) &&
-			(bn_wexpand(a,a->top+1) == NULL))
-		return(0);
-	i=0;
-	for (;;)
-		{
-		if (i >= a->top)
-			l=w;
-		else
-			l=(a->d[i]+w)&BN_MASK2;
-		a->d[i]=l;
-		if (w > l)
-			w=1;
-		else
-			break;
-		i++;
-		}
-	if (i >= a->top)
-		a->top++;
-	bn_check_top(a);
-	return(1);
-	}
-
-int BN_sub_word(BIGNUM *a, BN_ULONG w)
-	{
-	int i;
-
-	bn_check_top(a);
-	w &= BN_MASK2;
-
-	/* degenerate case: w is zero */
-	if (!w) return 1;
-	/* degenerate case: a is zero */
-	if(BN_is_zero(a))
-		{
-		i = BN_set_word(a,w);
-		if (i != 0)
-			BN_set_negative(a, 1);
-		return i;
-		}
-	/* handle 'a' when negative */
-	if (a->neg)
-		{
-		a->neg=0;
-		i=BN_add_word(a,w);
-		a->neg=1;
-		return(i);
-		}
-
-	if ((a->top == 1) && (a->d[0] < w))
-		{
-		a->d[0]=w-a->d[0];
-		a->neg=1;
-		return(1);
-		}
-	i=0;
-	for (;;)
-		{
-		if (a->d[i] >= w)
-			{
-			a->d[i]-=w;
-			break;
-			}
-		else
-			{
-			a->d[i]=(a->d[i]-w)&BN_MASK2;
-			i++;
-			w=1;
-			}
-		}
-	if ((a->d[i] == 0) && (i == (a->top-1)))
-		a->top--;
-	bn_check_top(a);
-	return(1);
-	}
-
-int BN_mul_word(BIGNUM *a, BN_ULONG w)
-	{
-	BN_ULONG ll;
-
-	bn_check_top(a);
-	w&=BN_MASK2;
-	if (a->top)
-		{
-		if (w == 0)
-			BN_zero(a);
-		else
-			{
-			ll=bn_mul_words(a->d,a->d,a->top,w);
-			if (ll)
-				{
-				if (bn_wexpand(a,a->top+1) == NULL) return(0);
-				a->d[a->top++]=ll;
-				}
-			}
-		}
-	bn_check_top(a);
-	return(1);
-	}
-
diff --git a/crypto/openssl/crypto/bn/bnspeed.c b/crypto/openssl/crypto/bn/bnspeed.c
deleted file mode 100644
index b554ac8cf857..000000000000
--- a/crypto/openssl/crypto/bn/bnspeed.c
+++ /dev/null
@@ -1,233 +0,0 @@
-/* unused */
-
-/* crypto/bn/bnspeed.c */
-/* Copyright (C) 1995-1998 Eric Young (eay@cryptsoft.com)
- * All rights reserved.
- *
- * This package is an SSL implementation written
- * by Eric Young (eay@cryptsoft.com).
- * The implementation was written so as to conform with Netscapes SSL.
- * 
- * This library is free for commercial and non-commercial use as long as
- * the following conditions are aheared to.  The following conditions
- * apply to all code found in this distribution, be it the RC4, RSA,
- * lhash, DES, etc., code; not just the SSL code.  The SSL documentation
- * included with this distribution is covered by the same copyright terms
- * except that the holder is Tim Hudson (tjh@cryptsoft.com).
- * 
- * Copyright remains Eric Young's, and as such any Copyright notices in
- * the code are not to be removed.
- * If this package is used in a product, Eric Young should be given attribution
- * as the author of the parts of the library used.
- * This can be in the form of a textual message at program startup or
- * in documentation (online or textual) provided with the package.
- * 
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions
- * are met:
- * 1. Redistributions of source code must retain the copyright
- *    notice, this list of conditions and the following disclaimer.
- * 2. Redistributions in binary form must reproduce the above copyright
- *    notice, this list of conditions and the following disclaimer in the
- *    documentation and/or other materials provided with the distribution.
- * 3. All advertising materials mentioning features or use of this software
- *    must display the following acknowledgement:
- *    "This product includes cryptographic software written by
- *     Eric Young (eay@cryptsoft.com)"
- *    The word 'cryptographic' can be left out if the rouines from the library
- *    being used are not cryptographic related :-).
- * 4. If you include any Windows specific code (or a derivative thereof) from 
- *    the apps directory (application code) you must include an acknowledgement:
- *    "This product includes software written by Tim Hudson (tjh@cryptsoft.com)"
- * 
- * THIS SOFTWARE IS PROVIDED BY ERIC YOUNG ``AS IS'' AND
- * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
- * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
- * ARE DISCLAIMED.  IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE
- * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
- * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
- * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
- * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
- * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
- * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
- * SUCH DAMAGE.
- * 
- * The licence and distribution terms for any publically available version or
- * derivative of this code cannot be changed.  i.e. this code cannot simply be
- * copied and put under another distribution licence
- * [including the GNU Public Licence.]
- */
-
-/* most of this code has been pilfered from my libdes speed.c program */
-
-#define BASENUM	1000000
-#undef PROG
-#define PROG bnspeed_main
-
-#include <stdio.h>
-#include <stdlib.h>
-#include <signal.h>
-#include <string.h>
-#include <openssl/crypto.h>
-#include <openssl/err.h>
-
-#if !defined(OPENSSL_SYS_MSDOS) && (!defined(OPENSSL_SYS_VMS) || defined(__DECC)) && !defined(OPENSSL_SYS_MACOSX)
-#define TIMES
-#endif
-
-#ifndef _IRIX
-#include <time.h>
-#endif
-#ifdef TIMES
-#include <sys/types.h>
-#include <sys/times.h>
-#endif
-
-/* Depending on the VMS version, the tms structure is perhaps defined.
-   The __TMS macro will show if it was.  If it wasn't defined, we should
-   undefine TIMES, since that tells the rest of the program how things
-   should be handled.				-- Richard Levitte */
-#if defined(OPENSSL_SYS_VMS_DECC) && !defined(__TMS)
-#undef TIMES
-#endif
-
-#ifndef TIMES
-#include <sys/timeb.h>
-#endif
-
-#if defined(sun) || defined(__ultrix)
-#define _POSIX_SOURCE
-#include <limits.h>
-#include <sys/param.h>
-#endif
-
-#include <openssl/bn.h>
-#include <openssl/x509.h>
-
-/* The following if from times(3) man page.  It may need to be changed */
-#ifndef HZ
-# ifndef CLK_TCK
-#  ifndef _BSD_CLK_TCK_ /* FreeBSD hack */
-#   define HZ	100.0
-#  else /* _BSD_CLK_TCK_ */
-#   define HZ ((double)_BSD_CLK_TCK_)
-#  endif
-# else /* CLK_TCK */
-#  define HZ ((double)CLK_TCK)
-# endif
-#endif
-
-#undef BUFSIZE
-#define BUFSIZE	((long)1024*8)
-int run=0;
-
-static double Time_F(int s);
-#define START	0
-#define STOP	1
-
-static double Time_F(int s)
-	{
-	double ret;
-#ifdef TIMES
-	static struct tms tstart,tend;
-
-	if (s == START)
-		{
-		times(&tstart);
-		return(0);
-		}
-	else
-		{
-		times(&tend);
-		ret=((double)(tend.tms_utime-tstart.tms_utime))/HZ;
-		return((ret < 1e-3)?1e-3:ret);
-		}
-#else /* !times() */
-	static struct timeb tstart,tend;
-	long i;
-
-	if (s == START)
-		{
-		ftime(&tstart);
-		return(0);
-		}
-	else
-		{
-		ftime(&tend);
-		i=(long)tend.millitm-(long)tstart.millitm;
-		ret=((double)(tend.time-tstart.time))+((double)i)/1000.0;
-		return((ret < 0.001)?0.001:ret);
-		}
-#endif
-	}
-
-#define NUM_SIZES	5
-static int sizes[NUM_SIZES]={128,256,512,1024,2048};
-/*static int sizes[NUM_SIZES]={59,179,299,419,539}; */
-
-void do_mul(BIGNUM *r,BIGNUM *a,BIGNUM *b,BN_CTX *ctx); 
-
-int main(int argc, char **argv)
-	{
-	BN_CTX *ctx;
-	BIGNUM a,b,c;
-
-	ctx=BN_CTX_new();
-	BN_init(&a);
-	BN_init(&b);
-	BN_init(&c);
-
-	do_mul(&a,&b,&c,ctx);
-	}
-
-void do_mul(BIGNUM *r, BIGNUM *a, BIGNUM *b, BN_CTX *ctx)
-	{
-	int i,j,k;
-	double tm;
-	long num;
-
-	for (i=0; i<NUM_SIZES; i++)
-		{
-		num=BASENUM;
-		if (i) num/=(i*3);
-		BN_rand(a,sizes[i],1,0);
-		for (j=i; j<NUM_SIZES; j++)
-			{
-			BN_rand(b,sizes[j],1,0);
-			Time_F(START);
-			for (k=0; k<num; k++)
-				BN_mul(r,b,a,ctx);
-			tm=Time_F(STOP);
-			printf("mul %4d x %4d -> %8.3fms\n",sizes[i],sizes[j],tm*1000.0/num);
-			}
-		}
-
-	for (i=0; i<NUM_SIZES; i++)
-		{
-		num=BASENUM;
-		if (i) num/=(i*3);
-		BN_rand(a,sizes[i],1,0);
-		Time_F(START);
-		for (k=0; k<num; k++)
-			BN_sqr(r,a,ctx);
-		tm=Time_F(STOP);
-		printf("sqr %4d x %4d -> %8.3fms\n",sizes[i],sizes[i],tm*1000.0/num);
-		}
-
-	for (i=0; i<NUM_SIZES; i++)
-		{
-		num=BASENUM/10;
-		if (i) num/=(i*3);
-		BN_rand(a,sizes[i]-1,1,0);
-		for (j=i; j<NUM_SIZES; j++)
-			{
-			BN_rand(b,sizes[j],1,0);
-			Time_F(START);
-			for (k=0; k<100000; k++)
-				BN_div(r, NULL, b, a,ctx);
-			tm=Time_F(STOP);
-			printf("div %4d / %4d -> %8.3fms\n",sizes[j],sizes[i]-1,tm*1000.0/num);
-			}
-		}
-	}
-
diff --git a/crypto/openssl/crypto/bn/bntest.c b/crypto/openssl/crypto/bn/bntest.c
deleted file mode 100644
index c885300a669f..000000000000
--- a/crypto/openssl/crypto/bn/bntest.c
+++ /dev/null
@@ -1,2011 +0,0 @@
-/* crypto/bn/bntest.c */
-/* Copyright (C) 1995-1998 Eric Young (eay@cryptsoft.com)
- * All rights reserved.
- *
- * This package is an SSL implementation written
- * by Eric Young (eay@cryptsoft.com).
- * The implementation was written so as to conform with Netscapes SSL.
- * 
- * This library is free for commercial and non-commercial use as long as
- * the following conditions are aheared to.  The following conditions
- * apply to all code found in this distribution, be it the RC4, RSA,
- * lhash, DES, etc., code; not just the SSL code.  The SSL documentation
- * included with this distribution is covered by the same copyright terms
- * except that the holder is Tim Hudson (tjh@cryptsoft.com).
- * 
- * Copyright remains Eric Young's, and as such any Copyright notices in
- * the code are not to be removed.
- * If this package is used in a product, Eric Young should be given attribution
- * as the author of the parts of the library used.
- * This can be in the form of a textual message at program startup or
- * in documentation (online or textual) provided with the package.
- * 
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions
- * are met:
- * 1. Redistributions of source code must retain the copyright
- *    notice, this list of conditions and the following disclaimer.
- * 2. Redistributions in binary form must reproduce the above copyright
- *    notice, this list of conditions and the following disclaimer in the
- *    documentation and/or other materials provided with the distribution.
- * 3. All advertising materials mentioning features or use of this software
- *    must display the following acknowledgement:
- *    "This product includes cryptographic software written by
- *     Eric Young (eay@cryptsoft.com)"
- *    The word 'cryptographic' can be left out if the rouines from the library
- *    being used are not cryptographic related :-).
- * 4. If you include any Windows specific code (or a derivative thereof) from 
- *    the apps directory (application code) you must include an acknowledgement:
- *    "This product includes software written by Tim Hudson (tjh@cryptsoft.com)"
- * 
- * THIS SOFTWARE IS PROVIDED BY ERIC YOUNG ``AS IS'' AND
- * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
- * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
- * ARE DISCLAIMED.  IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE
- * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
- * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
- * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
- * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
- * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
- * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
- * SUCH DAMAGE.
- * 
- * The licence and distribution terms for any publically available version or
- * derivative of this code cannot be changed.  i.e. this code cannot simply be
- * copied and put under another distribution licence
- * [including the GNU Public Licence.]
- */
-/* ====================================================================
- * Copyright 2002 Sun Microsystems, Inc. ALL RIGHTS RESERVED.
- *
- * Portions of the attached software ("Contribution") are developed by 
- * SUN MICROSYSTEMS, INC., and are contributed to the OpenSSL project.
- *
- * The Contribution is licensed pursuant to the Eric Young open source
- * license provided above.
- *
- * The binary polynomial arithmetic software is originally written by 
- * Sheueling Chang Shantz and Douglas Stebila of Sun Microsystems Laboratories.
- *
- */
-
-/* Until the key-gen callbacks are modified to use newer prototypes, we allow
- * deprecated functions for openssl-internal code */
-#ifdef OPENSSL_NO_DEPRECATED
-#undef OPENSSL_NO_DEPRECATED
-#endif
-
-#include <stdio.h>
-#include <stdlib.h>
-#include <string.h>
-
-#include "e_os.h"
-
-#include <openssl/bio.h>
-#include <openssl/bn.h>
-#include <openssl/rand.h>
-#include <openssl/x509.h>
-#include <openssl/err.h>
-
-const int num0 = 100; /* number of tests */
-const int num1 = 50;  /* additional tests for some functions */
-const int num2 = 5;   /* number of tests for slow functions */
-
-int test_add(BIO *bp);
-int test_sub(BIO *bp);
-int test_lshift1(BIO *bp);
-int test_lshift(BIO *bp,BN_CTX *ctx,BIGNUM *a_);
-int test_rshift1(BIO *bp);
-int test_rshift(BIO *bp,BN_CTX *ctx);
-int test_div(BIO *bp,BN_CTX *ctx);
-int test_div_word(BIO *bp);
-int test_div_recp(BIO *bp,BN_CTX *ctx);
-int test_mul(BIO *bp);
-int test_sqr(BIO *bp,BN_CTX *ctx);
-int test_mont(BIO *bp,BN_CTX *ctx);
-int test_mod(BIO *bp,BN_CTX *ctx);
-int test_mod_mul(BIO *bp,BN_CTX *ctx);
-int test_mod_exp(BIO *bp,BN_CTX *ctx);
-int test_mod_exp_mont_consttime(BIO *bp,BN_CTX *ctx);
-int test_exp(BIO *bp,BN_CTX *ctx);
-int test_gf2m_add(BIO *bp);
-int test_gf2m_mod(BIO *bp);
-int test_gf2m_mod_mul(BIO *bp,BN_CTX *ctx);
-int test_gf2m_mod_sqr(BIO *bp,BN_CTX *ctx);
-int test_gf2m_mod_inv(BIO *bp,BN_CTX *ctx);
-int test_gf2m_mod_div(BIO *bp,BN_CTX *ctx);
-int test_gf2m_mod_exp(BIO *bp,BN_CTX *ctx);
-int test_gf2m_mod_sqrt(BIO *bp,BN_CTX *ctx);
-int test_gf2m_mod_solve_quad(BIO *bp,BN_CTX *ctx);
-int test_kron(BIO *bp,BN_CTX *ctx);
-int test_sqrt(BIO *bp,BN_CTX *ctx);
-int rand_neg(void);
-static int results=0;
-
-static unsigned char lst[]="\xC6\x4F\x43\x04\x2A\xEA\xCA\x6E\x58\x36\x80\x5B\xE8\xC9"
-"\x9B\x04\x5D\x48\x36\xC2\xFD\x16\xC9\x64\xF0";
-
-static const char rnd_seed[] = "string to make the random number generator think it has entropy";
-
-static void message(BIO *out, char *m)
-	{
-	fprintf(stderr, "test %s\n", m);
-	BIO_puts(out, "print \"test ");
-	BIO_puts(out, m);
-	BIO_puts(out, "\\n\"\n");
-	}
-
-int main(int argc, char *argv[])
-	{
-	BN_CTX *ctx;
-	BIO *out;
-	char *outfile=NULL;
-
-	results = 0;
-
-	RAND_seed(rnd_seed, sizeof rnd_seed); /* or BN_generate_prime may fail */
-
-	argc--;
-	argv++;
-	while (argc >= 1)
-		{
-		if (strcmp(*argv,"-results") == 0)
-			results=1;
-		else if (strcmp(*argv,"-out") == 0)
-			{
-			if (--argc < 1) break;
-			outfile= *(++argv);
-			}
-		argc--;
-		argv++;
-		}
-
-
-	ctx=BN_CTX_new();
-	if (ctx == NULL) EXIT(1);
-
-	out=BIO_new(BIO_s_file());
-	if (out == NULL) EXIT(1);
-	if (outfile == NULL)
-		{
-		BIO_set_fp(out,stdout,BIO_NOCLOSE);
-		}
-	else
-		{
-		if (!BIO_write_filename(out,outfile))
-			{
-			perror(outfile);
-			EXIT(1);
-			}
-		}
-
-	if (!results)
-		BIO_puts(out,"obase=16\nibase=16\n");
-
-	message(out,"BN_add");
-	if (!test_add(out)) goto err;
-	BIO_flush(out);
-
-	message(out,"BN_sub");
-	if (!test_sub(out)) goto err;
-	BIO_flush(out);
-
-	message(out,"BN_lshift1");
-	if (!test_lshift1(out)) goto err;
-	BIO_flush(out);
-
-	message(out,"BN_lshift (fixed)");
-	if (!test_lshift(out,ctx,BN_bin2bn(lst,sizeof(lst)-1,NULL)))
-	    goto err;
-	BIO_flush(out);
-
-	message(out,"BN_lshift");
-	if (!test_lshift(out,ctx,NULL)) goto err;
-	BIO_flush(out);
-
-	message(out,"BN_rshift1");
-	if (!test_rshift1(out)) goto err;
-	BIO_flush(out);
-
-	message(out,"BN_rshift");
-	if (!test_rshift(out,ctx)) goto err;
-	BIO_flush(out);
-
-	message(out,"BN_sqr");
-	if (!test_sqr(out,ctx)) goto err;
-	BIO_flush(out);
-
-	message(out,"BN_mul");
-	if (!test_mul(out)) goto err;
-	BIO_flush(out);
-
-	message(out,"BN_div");
-	if (!test_div(out,ctx)) goto err;
-	BIO_flush(out);
-
-	message(out,"BN_div_word");
-	if (!test_div_word(out)) goto err;
-	BIO_flush(out);
-
-	message(out,"BN_div_recp");
-	if (!test_div_recp(out,ctx)) goto err;
-	BIO_flush(out);
-
-	message(out,"BN_mod");
-	if (!test_mod(out,ctx)) goto err;
-	BIO_flush(out);
-
-	message(out,"BN_mod_mul");
-	if (!test_mod_mul(out,ctx)) goto err;
-	BIO_flush(out);
-
-	message(out,"BN_mont");
-	if (!test_mont(out,ctx)) goto err;
-	BIO_flush(out);
-
-	message(out,"BN_mod_exp");
-	if (!test_mod_exp(out,ctx)) goto err;
-	BIO_flush(out);
-
-	message(out,"BN_mod_exp_mont_consttime");
-	if (!test_mod_exp_mont_consttime(out,ctx)) goto err;
-	BIO_flush(out);
-
-	message(out,"BN_exp");
-	if (!test_exp(out,ctx)) goto err;
-	BIO_flush(out);
-
-	message(out,"BN_kronecker");
-	if (!test_kron(out,ctx)) goto err;
-	BIO_flush(out);
-
-	message(out,"BN_mod_sqrt");
-	if (!test_sqrt(out,ctx)) goto err;
-	BIO_flush(out);
-
-	message(out,"BN_GF2m_add");
-	if (!test_gf2m_add(out)) goto err;
-	BIO_flush(out);
-
-	message(out,"BN_GF2m_mod");
-	if (!test_gf2m_mod(out)) goto err;
-	BIO_flush(out);
-
-	message(out,"BN_GF2m_mod_mul");
-	if (!test_gf2m_mod_mul(out,ctx)) goto err;
-	BIO_flush(out);
-
-	message(out,"BN_GF2m_mod_sqr");
-	if (!test_gf2m_mod_sqr(out,ctx)) goto err;
-	BIO_flush(out);
-
-	message(out,"BN_GF2m_mod_inv");
-	if (!test_gf2m_mod_inv(out,ctx)) goto err;
-	BIO_flush(out);
-
-	message(out,"BN_GF2m_mod_div");
-	if (!test_gf2m_mod_div(out,ctx)) goto err;
-	BIO_flush(out);
-
-	message(out,"BN_GF2m_mod_exp");
-	if (!test_gf2m_mod_exp(out,ctx)) goto err;
-	BIO_flush(out);
-
-	message(out,"BN_GF2m_mod_sqrt");
-	if (!test_gf2m_mod_sqrt(out,ctx)) goto err;
-	BIO_flush(out);
-
-	message(out,"BN_GF2m_mod_solve_quad");
-	if (!test_gf2m_mod_solve_quad(out,ctx)) goto err;
-	BIO_flush(out);
-
-	BN_CTX_free(ctx);
-	BIO_free(out);
-
-/**/
-	EXIT(0);
-err:
-	BIO_puts(out,"1\n"); /* make sure the Perl script fed by bc notices
-	                      * the failure, see test_bn in test/Makefile.ssl*/
-	BIO_flush(out);
-	ERR_load_crypto_strings();
-	ERR_print_errors_fp(stderr);
-	EXIT(1);
-	return(1);
-	}
-
-int test_add(BIO *bp)
-	{
-	BIGNUM a,b,c;
-	int i;
-
-	BN_init(&a);
-	BN_init(&b);
-	BN_init(&c);
-
-	BN_bntest_rand(&a,512,0,0);
-	for (i=0; i<num0; i++)
-		{
-		BN_bntest_rand(&b,450+i,0,0);
-		a.neg=rand_neg();
-		b.neg=rand_neg();
-		BN_add(&c,&a,&b);
-		if (bp != NULL)
-			{
-			if (!results)
-				{
-				BN_print(bp,&a);
-				BIO_puts(bp," + ");
-				BN_print(bp,&b);
-				BIO_puts(bp," - ");
-				}
-			BN_print(bp,&c);
-			BIO_puts(bp,"\n");
-			}
-		a.neg=!a.neg;
-		b.neg=!b.neg;
-		BN_add(&c,&c,&b);
-		BN_add(&c,&c,&a);
-		if(!BN_is_zero(&c))
-		    {
-		    fprintf(stderr,"Add test failed!\n");
-		    return 0;
-		    }
-		}
-	BN_free(&a);
-	BN_free(&b);
-	BN_free(&c);
-	return(1);
-	}
-
-int test_sub(BIO *bp)
-	{
-	BIGNUM a,b,c;
-	int i;
-
-	BN_init(&a);
-	BN_init(&b);
-	BN_init(&c);
-
-	for (i=0; i<num0+num1; i++)
-		{
-		if (i < num1)
-			{
-			BN_bntest_rand(&a,512,0,0);
-			BN_copy(&b,&a);
-			if (BN_set_bit(&a,i)==0) return(0);
-			BN_add_word(&b,i);
-			}
-		else
-			{
-			BN_bntest_rand(&b,400+i-num1,0,0);
-			a.neg=rand_neg();
-			b.neg=rand_neg();
-			}
-		BN_sub(&c,&a,&b);
-		if (bp != NULL)
-			{
-			if (!results)
-				{
-				BN_print(bp,&a);
-				BIO_puts(bp," - ");
-				BN_print(bp,&b);
-				BIO_puts(bp," - ");
-				}
-			BN_print(bp,&c);
-			BIO_puts(bp,"\n");
-			}
-		BN_add(&c,&c,&b);
-		BN_sub(&c,&c,&a);
-		if(!BN_is_zero(&c))
-		    {
-		    fprintf(stderr,"Subtract test failed!\n");
-		    return 0;
-		    }
-		}
-	BN_free(&a);
-	BN_free(&b);
-	BN_free(&c);
-	return(1);
-	}
-
-int test_div(BIO *bp, BN_CTX *ctx)
-	{
-	BIGNUM a,b,c,d,e;
-	int i;
-
-	BN_init(&a);
-	BN_init(&b);
-	BN_init(&c);
-	BN_init(&d);
-	BN_init(&e);
-
-	for (i=0; i<num0+num1; i++)
-		{
-		if (i < num1)
-			{
-			BN_bntest_rand(&a,400,0,0);
-			BN_copy(&b,&a);
-			BN_lshift(&a,&a,i);
-			BN_add_word(&a,i);
-			}
-		else
-			BN_bntest_rand(&b,50+3*(i-num1),0,0);
-		a.neg=rand_neg();
-		b.neg=rand_neg();
-		BN_div(&d,&c,&a,&b,ctx);
-		if (bp != NULL)
-			{
-			if (!results)
-				{
-				BN_print(bp,&a);
-				BIO_puts(bp," / ");
-				BN_print(bp,&b);
-				BIO_puts(bp," - ");
-				}
-			BN_print(bp,&d);
-			BIO_puts(bp,"\n");
-
-			if (!results)
-				{
-				BN_print(bp,&a);
-				BIO_puts(bp," % ");
-				BN_print(bp,&b);
-				BIO_puts(bp," - ");
-				}
-			BN_print(bp,&c);
-			BIO_puts(bp,"\n");
-			}
-		BN_mul(&e,&d,&b,ctx);
-		BN_add(&d,&e,&c);
-		BN_sub(&d,&d,&a);
-		if(!BN_is_zero(&d))
-		    {
-		    fprintf(stderr,"Division test failed!\n");
-		    return 0;
-		    }
-		}
-	BN_free(&a);
-	BN_free(&b);
-	BN_free(&c);
-	BN_free(&d);
-	BN_free(&e);
-	return(1);
-	}
-
-static void print_word(BIO *bp,BN_ULONG w)
-	{
-#ifdef SIXTY_FOUR_BIT
-	if (sizeof(w) > sizeof(unsigned long))
-		{
-		unsigned long	h=(unsigned long)(w>>32),
-				l=(unsigned long)(w);
-
-		if (h)	BIO_printf(bp,"%lX%08lX",h,l);
-		else	BIO_printf(bp,"%lX",l);
-		return;
-		}
-#endif
-	BIO_printf(bp,"%lX",w);
-	}
-
-int test_div_word(BIO *bp)
-	{
-	BIGNUM   a,b;
-	BN_ULONG r,s;
-	int i;
-
-	BN_init(&a);
-	BN_init(&b);
-
-	for (i=0; i<num0; i++)
-		{
-		do {
-			BN_bntest_rand(&a,512,-1,0);
-			BN_bntest_rand(&b,BN_BITS2,-1,0);
-			s = b.d[0];
-		} while (!s);
-
-		BN_copy(&b, &a);
-		r = BN_div_word(&b, s);
-
-		if (bp != NULL)
-			{
-			if (!results)
-				{
-				BN_print(bp,&a);
-				BIO_puts(bp," / ");
-				print_word(bp,s);
-				BIO_puts(bp," - ");
-				}
-			BN_print(bp,&b);
-			BIO_puts(bp,"\n");
-
-			if (!results)
-				{
-				BN_print(bp,&a);
-				BIO_puts(bp," % ");
-				print_word(bp,s);
-				BIO_puts(bp," - ");
-				}
-			print_word(bp,r);
-			BIO_puts(bp,"\n");
-			}
-		BN_mul_word(&b,s);
-		BN_add_word(&b,r);
-		BN_sub(&b,&a,&b);
-		if(!BN_is_zero(&b))
-		    {
-		    fprintf(stderr,"Division (word) test failed!\n");
-		    return 0;
-		    }
-		}
-	BN_free(&a);
-	BN_free(&b);
-	return(1);
-	}
-
-int test_div_recp(BIO *bp, BN_CTX *ctx)
-	{
-	BIGNUM a,b,c,d,e;
-	BN_RECP_CTX recp;
-	int i;
-
-	BN_RECP_CTX_init(&recp);
-	BN_init(&a);
-	BN_init(&b);
-	BN_init(&c);
-	BN_init(&d);
-	BN_init(&e);
-
-	for (i=0; i<num0+num1; i++)
-		{
-		if (i < num1)
-			{
-			BN_bntest_rand(&a,400,0,0);
-			BN_copy(&b,&a);
-			BN_lshift(&a,&a,i);
-			BN_add_word(&a,i);
-			}
-		else
-			BN_bntest_rand(&b,50+3*(i-num1),0,0);
-		a.neg=rand_neg();
-		b.neg=rand_neg();
-		BN_RECP_CTX_set(&recp,&b,ctx);
-		BN_div_recp(&d,&c,&a,&recp,ctx);
-		if (bp != NULL)
-			{
-			if (!results)
-				{
-				BN_print(bp,&a);
-				BIO_puts(bp," / ");
-				BN_print(bp,&b);
-				BIO_puts(bp," - ");
-				}
-			BN_print(bp,&d);
-			BIO_puts(bp,"\n");
-
-			if (!results)
-				{
-				BN_print(bp,&a);
-				BIO_puts(bp," % ");
-				BN_print(bp,&b);
-				BIO_puts(bp," - ");
-				}
-			BN_print(bp,&c);
-			BIO_puts(bp,"\n");
-			}
-		BN_mul(&e,&d,&b,ctx);
-		BN_add(&d,&e,&c);
-		BN_sub(&d,&d,&a);
-		if(!BN_is_zero(&d))
-		    {
-		    fprintf(stderr,"Reciprocal division test failed!\n");
-		    fprintf(stderr,"a=");
-		    BN_print_fp(stderr,&a);
-		    fprintf(stderr,"\nb=");
-		    BN_print_fp(stderr,&b);
-		    fprintf(stderr,"\n");
-		    return 0;
-		    }
-		}
-	BN_free(&a);
-	BN_free(&b);
-	BN_free(&c);
-	BN_free(&d);
-	BN_free(&e);
-	BN_RECP_CTX_free(&recp);
-	return(1);
-	}
-
-int test_mul(BIO *bp)
-	{
-	BIGNUM a,b,c,d,e;
-	int i;
-	BN_CTX *ctx;
-
-	ctx = BN_CTX_new();
-	if (ctx == NULL) EXIT(1);
-	
-	BN_init(&a);
-	BN_init(&b);
-	BN_init(&c);
-	BN_init(&d);
-	BN_init(&e);
-
-	for (i=0; i<num0+num1; i++)
-		{
-		if (i <= num1)
-			{
-			BN_bntest_rand(&a,100,0,0);
-			BN_bntest_rand(&b,100,0,0);
-			}
-		else
-			BN_bntest_rand(&b,i-num1,0,0);
-		a.neg=rand_neg();
-		b.neg=rand_neg();
-		BN_mul(&c,&a,&b,ctx);
-		if (bp != NULL)
-			{
-			if (!results)
-				{
-				BN_print(bp,&a);
-				BIO_puts(bp," * ");
-				BN_print(bp,&b);
-				BIO_puts(bp," - ");
-				}
-			BN_print(bp,&c);
-			BIO_puts(bp,"\n");
-			}
-		BN_div(&d,&e,&c,&a,ctx);
-		BN_sub(&d,&d,&b);
-		if(!BN_is_zero(&d) || !BN_is_zero(&e))
-		    {
-		    fprintf(stderr,"Multiplication test failed!\n");
-		    return 0;
-		    }
-		}
-	BN_free(&a);
-	BN_free(&b);
-	BN_free(&c);
-	BN_free(&d);
-	BN_free(&e);
-	BN_CTX_free(ctx);
-	return(1);
-	}
-
-int test_sqr(BIO *bp, BN_CTX *ctx)
-	{
-	BIGNUM a,c,d,e;
-	int i;
-
-	BN_init(&a);
-	BN_init(&c);
-	BN_init(&d);
-	BN_init(&e);
-
-	for (i=0; i<num0; i++)
-		{
-		BN_bntest_rand(&a,40+i*10,0,0);
-		a.neg=rand_neg();
-		BN_sqr(&c,&a,ctx);
-		if (bp != NULL)
-			{
-			if (!results)
-				{
-				BN_print(bp,&a);
-				BIO_puts(bp," * ");
-				BN_print(bp,&a);
-				BIO_puts(bp," - ");
-				}
-			BN_print(bp,&c);
-			BIO_puts(bp,"\n");
-			}
-		BN_div(&d,&e,&c,&a,ctx);
-		BN_sub(&d,&d,&a);
-		if(!BN_is_zero(&d) || !BN_is_zero(&e))
-		    {
-		    fprintf(stderr,"Square test failed!\n");
-		    return 0;
-		    }
-		}
-	BN_free(&a);
-	BN_free(&c);
-	BN_free(&d);
-	BN_free(&e);
-	return(1);
-	}
-
-int test_mont(BIO *bp, BN_CTX *ctx)
-	{
-	BIGNUM a,b,c,d,A,B;
-	BIGNUM n;
-	int i;
-	BN_MONT_CTX *mont;
-
-	BN_init(&a);
-	BN_init(&b);
-	BN_init(&c);
-	BN_init(&d);
-	BN_init(&A);
-	BN_init(&B);
-	BN_init(&n);
-
-	mont=BN_MONT_CTX_new();
-
-	BN_bntest_rand(&a,100,0,0); /**/
-	BN_bntest_rand(&b,100,0,0); /**/
-	for (i=0; i<num2; i++)
-		{
-		int bits = (200*(i+1))/num2;
-
-		if (bits == 0)
-			continue;
-		BN_bntest_rand(&n,bits,0,1);
-		BN_MONT_CTX_set(mont,&n,ctx);
-
-		BN_nnmod(&a,&a,&n,ctx);
-		BN_nnmod(&b,&b,&n,ctx);
-
-		BN_to_montgomery(&A,&a,mont,ctx);
-		BN_to_montgomery(&B,&b,mont,ctx);
-
-		BN_mod_mul_montgomery(&c,&A,&B,mont,ctx);/**/
-		BN_from_montgomery(&A,&c,mont,ctx);/**/
-		if (bp != NULL)
-			{
-			if (!results)
-				{
-#ifdef undef
-fprintf(stderr,"%d * %d %% %d\n",
-BN_num_bits(&a),
-BN_num_bits(&b),
-BN_num_bits(mont->N));
-#endif
-				BN_print(bp,&a);
-				BIO_puts(bp," * ");
-				BN_print(bp,&b);
-				BIO_puts(bp," % ");
-				BN_print(bp,&(mont->N));
-				BIO_puts(bp," - ");
-				}
-			BN_print(bp,&A);
-			BIO_puts(bp,"\n");
-			}
-		BN_mod_mul(&d,&a,&b,&n,ctx);
-		BN_sub(&d,&d,&A);
-		if(!BN_is_zero(&d))
-		    {
-		    fprintf(stderr,"Montgomery multiplication test failed!\n");
-		    return 0;
-		    }
-		}
-	BN_MONT_CTX_free(mont);
-	BN_free(&a);
-	BN_free(&b);
-	BN_free(&c);
-	BN_free(&d);
-	BN_free(&A);
-	BN_free(&B);
-	BN_free(&n);
-	return(1);
-	}
-
-int test_mod(BIO *bp, BN_CTX *ctx)
-	{
-	BIGNUM *a,*b,*c,*d,*e;
-	int i;
-
-	a=BN_new();
-	b=BN_new();
-	c=BN_new();
-	d=BN_new();
-	e=BN_new();
-
-	BN_bntest_rand(a,1024,0,0); /**/
-	for (i=0; i<num0; i++)
-		{
-		BN_bntest_rand(b,450+i*10,0,0); /**/
-		a->neg=rand_neg();
-		b->neg=rand_neg();
-		BN_mod(c,a,b,ctx);/**/
-		if (bp != NULL)
-			{
-			if (!results)
-				{
-				BN_print(bp,a);
-				BIO_puts(bp," % ");
-				BN_print(bp,b);
-				BIO_puts(bp," - ");
-				}
-			BN_print(bp,c);
-			BIO_puts(bp,"\n");
-			}
-		BN_div(d,e,a,b,ctx);
-		BN_sub(e,e,c);
-		if(!BN_is_zero(e))
-		    {
-		    fprintf(stderr,"Modulo test failed!\n");
-		    return 0;
-		    }
-		}
-	BN_free(a);
-	BN_free(b);
-	BN_free(c);
-	BN_free(d);
-	BN_free(e);
-	return(1);
-	}
-
-int test_mod_mul(BIO *bp, BN_CTX *ctx)
-	{
-	BIGNUM *a,*b,*c,*d,*e;
-	int i,j;
-
-	a=BN_new();
-	b=BN_new();
-	c=BN_new();
-	d=BN_new();
-	e=BN_new();
-
-	for (j=0; j<3; j++) {
-	BN_bntest_rand(c,1024,0,0); /**/
-	for (i=0; i<num0; i++)
-		{
-		BN_bntest_rand(a,475+i*10,0,0); /**/
-		BN_bntest_rand(b,425+i*11,0,0); /**/
-		a->neg=rand_neg();
-		b->neg=rand_neg();
-		if (!BN_mod_mul(e,a,b,c,ctx))
-			{
-			unsigned long l;
-
-			while ((l=ERR_get_error()))
-				fprintf(stderr,"ERROR:%s\n",
-					ERR_error_string(l,NULL));
-			EXIT(1);
-			}
-		if (bp != NULL)
-			{
-			if (!results)
-				{
-				BN_print(bp,a);
-				BIO_puts(bp," * ");
-				BN_print(bp,b);
-				BIO_puts(bp," % ");
-				BN_print(bp,c);
-				if ((a->neg ^ b->neg) && !BN_is_zero(e))
-					{
-					/* If  (a*b) % c  is negative,  c  must be added
-					 * in order to obtain the normalized remainder
-					 * (new with OpenSSL 0.9.7, previous versions of
-					 * BN_mod_mul could generate negative results)
-					 */
-					BIO_puts(bp," + ");
-					BN_print(bp,c);
-					}
-				BIO_puts(bp," - ");
-				}
-			BN_print(bp,e);
-			BIO_puts(bp,"\n");
-			}
-		BN_mul(d,a,b,ctx);
-		BN_sub(d,d,e);
-		BN_div(a,b,d,c,ctx);
-		if(!BN_is_zero(b))
-		    {
-		    fprintf(stderr,"Modulo multiply test failed!\n");
-		    ERR_print_errors_fp(stderr);
-		    return 0;
-		    }
-		}
-	}
-	BN_free(a);
-	BN_free(b);
-	BN_free(c);
-	BN_free(d);
-	BN_free(e);
-	return(1);
-	}
-
-int test_mod_exp(BIO *bp, BN_CTX *ctx)
-	{
-	BIGNUM *a,*b,*c,*d,*e;
-	int i;
-
-	a=BN_new();
-	b=BN_new();
-	c=BN_new();
-	d=BN_new();
-	e=BN_new();
-
-	BN_bntest_rand(c,30,0,1); /* must be odd for montgomery */
-	for (i=0; i<num2; i++)
-		{
-		BN_bntest_rand(a,20+i*5,0,0); /**/
-		BN_bntest_rand(b,2+i,0,0); /**/
-
-		if (!BN_mod_exp(d,a,b,c,ctx))
-			return(00);
-
-		if (bp != NULL)
-			{
-			if (!results)
-				{
-				BN_print(bp,a);
-				BIO_puts(bp," ^ ");
-				BN_print(bp,b);
-				BIO_puts(bp," % ");
-				BN_print(bp,c);
-				BIO_puts(bp," - ");
-				}
-			BN_print(bp,d);
-			BIO_puts(bp,"\n");
-			}
-		BN_exp(e,a,b,ctx);
-		BN_sub(e,e,d);
-		BN_div(a,b,e,c,ctx);
-		if(!BN_is_zero(b))
-		    {
-		    fprintf(stderr,"Modulo exponentiation test failed!\n");
-		    return 0;
-		    }
-		}
-	BN_free(a);
-	BN_free(b);
-	BN_free(c);
-	BN_free(d);
-	BN_free(e);
-	return(1);
-	}
-
-int test_mod_exp_mont_consttime(BIO *bp, BN_CTX *ctx)
-	{
-	BIGNUM *a,*b,*c,*d,*e;
-	int i;
-
-	a=BN_new();
-	b=BN_new();
-	c=BN_new();
-	d=BN_new();
-	e=BN_new();
-
-	BN_bntest_rand(c,30,0,1); /* must be odd for montgomery */
-	for (i=0; i<num2; i++)
-		{
-		BN_bntest_rand(a,20+i*5,0,0); /**/
-		BN_bntest_rand(b,2+i,0,0); /**/
-
-		if (!BN_mod_exp_mont_consttime(d,a,b,c,ctx,NULL))
-			return(00);
-
-		if (bp != NULL)
-			{
-			if (!results)
-				{
-				BN_print(bp,a);
-				BIO_puts(bp," ^ ");
-				BN_print(bp,b);
-				BIO_puts(bp," % ");
-				BN_print(bp,c);
-				BIO_puts(bp," - ");
-				}
-			BN_print(bp,d);
-			BIO_puts(bp,"\n");
-			}
-		BN_exp(e,a,b,ctx);
-		BN_sub(e,e,d);
-		BN_div(a,b,e,c,ctx);
-		if(!BN_is_zero(b))
-		    {
-		    fprintf(stderr,"Modulo exponentiation test failed!\n");
-		    return 0;
-		    }
-		}
-	BN_free(a);
-	BN_free(b);
-	BN_free(c);
-	BN_free(d);
-	BN_free(e);
-	return(1);
-	}
-
-int test_exp(BIO *bp, BN_CTX *ctx)
-	{
-	BIGNUM *a,*b,*d,*e,*one;
-	int i;
-
-	a=BN_new();
-	b=BN_new();
-	d=BN_new();
-	e=BN_new();
-	one=BN_new();
-	BN_one(one);
-
-	for (i=0; i<num2; i++)
-		{
-		BN_bntest_rand(a,20+i*5,0,0); /**/
-		BN_bntest_rand(b,2+i,0,0); /**/
-
-		if (!BN_exp(d,a,b,ctx))
-			return(00);
-
-		if (bp != NULL)
-			{
-			if (!results)
-				{
-				BN_print(bp,a);
-				BIO_puts(bp," ^ ");
-				BN_print(bp,b);
-				BIO_puts(bp," - ");
-				}
-			BN_print(bp,d);
-			BIO_puts(bp,"\n");
-			}
-		BN_one(e);
-		for( ; !BN_is_zero(b) ; BN_sub(b,b,one))
-		    BN_mul(e,e,a,ctx);
-		BN_sub(e,e,d);
-		if(!BN_is_zero(e))
-		    {
-		    fprintf(stderr,"Exponentiation test failed!\n");
-		    return 0;
-		    }
-		}
-	BN_free(a);
-	BN_free(b);
-	BN_free(d);
-	BN_free(e);
-	BN_free(one);
-	return(1);
-	}
-
-int test_gf2m_add(BIO *bp)
-	{
-	BIGNUM a,b,c;
-	int i, ret = 0;
-
-	BN_init(&a);
-	BN_init(&b);
-	BN_init(&c);
-
-	for (i=0; i<num0; i++)
-		{
-		BN_rand(&a,512,0,0);
-		BN_copy(&b, BN_value_one());
-		a.neg=rand_neg();
-		b.neg=rand_neg();
-		BN_GF2m_add(&c,&a,&b);
-#if 0 /* make test uses ouput in bc but bc can't handle GF(2^m) arithmetic */
-		if (bp != NULL)
-			{
-			if (!results)
-				{
-				BN_print(bp,&a);
-				BIO_puts(bp," ^ ");
-				BN_print(bp,&b);
-				BIO_puts(bp," = ");
-				}
-			BN_print(bp,&c);
-			BIO_puts(bp,"\n");
-			}
-#endif
-		/* Test that two added values have the correct parity. */
-		if((BN_is_odd(&a) && BN_is_odd(&c)) || (!BN_is_odd(&a) && !BN_is_odd(&c)))
-			{
-		    fprintf(stderr,"GF(2^m) addition test (a) failed!\n");
-			goto err;
-			}
-		BN_GF2m_add(&c,&c,&c);
-		/* Test that c + c = 0. */
-		if(!BN_is_zero(&c))
-		    {
-		    fprintf(stderr,"GF(2^m) addition test (b) failed!\n");
-			goto err;
-		    }
-		}
-	ret = 1;
-  err:
-	BN_free(&a);
-	BN_free(&b);
-	BN_free(&c);
-	return ret;
-	}
-
-int test_gf2m_mod(BIO *bp)
-	{
-	BIGNUM *a,*b[2],*c,*d,*e;
-	int i, j, ret = 0;
-	unsigned int p0[] = {163,7,6,3,0};
-	unsigned int p1[] = {193,15,0};
-
-	a=BN_new();
-	b[0]=BN_new();
-	b[1]=BN_new();
-	c=BN_new();
-	d=BN_new();
-	e=BN_new();
-
-	BN_GF2m_arr2poly(p0, b[0]);
-	BN_GF2m_arr2poly(p1, b[1]);
-
-	for (i=0; i<num0; i++)
-		{
-		BN_bntest_rand(a, 1024, 0, 0);
-		for (j=0; j < 2; j++)
-			{
-			BN_GF2m_mod(c, a, b[j]);
-#if 0 /* make test uses ouput in bc but bc can't handle GF(2^m) arithmetic */
-			if (bp != NULL)
-				{
-				if (!results)
-					{
-					BN_print(bp,a);
-					BIO_puts(bp," % ");
-					BN_print(bp,b[j]);
-					BIO_puts(bp," - ");
-					BN_print(bp,c);
-					BIO_puts(bp,"\n");
-					}
-				}
-#endif
-			BN_GF2m_add(d, a, c);
-			BN_GF2m_mod(e, d, b[j]);
-			/* Test that a + (a mod p) mod p == 0. */
-			if(!BN_is_zero(e))
-				{
-				fprintf(stderr,"GF(2^m) modulo test failed!\n");
-				goto err;
-				}
-			}
-		}
-	ret = 1;
-  err:
-	BN_free(a);
-	BN_free(b[0]);
-	BN_free(b[1]);
-	BN_free(c);
-	BN_free(d);
-	BN_free(e);
-	return ret;
-	}
-
-int test_gf2m_mod_mul(BIO *bp,BN_CTX *ctx)
-	{
-	BIGNUM *a,*b[2],*c,*d,*e,*f,*g,*h;
-	int i, j, ret = 0;
-	unsigned int p0[] = {163,7,6,3,0};
-	unsigned int p1[] = {193,15,0};
-
-	a=BN_new();
-	b[0]=BN_new();
-	b[1]=BN_new();
-	c=BN_new();
-	d=BN_new();
-	e=BN_new();
-	f=BN_new();
-	g=BN_new();
-	h=BN_new();
-
-	BN_GF2m_arr2poly(p0, b[0]);
-	BN_GF2m_arr2poly(p1, b[1]);
-
-	for (i=0; i<num0; i++)
-		{
-		BN_bntest_rand(a, 1024, 0, 0);
-		BN_bntest_rand(c, 1024, 0, 0);
-		BN_bntest_rand(d, 1024, 0, 0);
-		for (j=0; j < 2; j++)
-			{
-			BN_GF2m_mod_mul(e, a, c, b[j], ctx);
-#if 0 /* make test uses ouput in bc but bc can't handle GF(2^m) arithmetic */
-			if (bp != NULL)
-				{
-				if (!results)
-					{
-					BN_print(bp,a);
-					BIO_puts(bp," * ");
-					BN_print(bp,c);
-					BIO_puts(bp," % ");
-					BN_print(bp,b[j]);
-					BIO_puts(bp," - ");
-					BN_print(bp,e);
-					BIO_puts(bp,"\n");
-					}
-				}
-#endif
-			BN_GF2m_add(f, a, d);
-			BN_GF2m_mod_mul(g, f, c, b[j], ctx);
-			BN_GF2m_mod_mul(h, d, c, b[j], ctx);
-			BN_GF2m_add(f, e, g);
-			BN_GF2m_add(f, f, h);
-			/* Test that (a+d)*c = a*c + d*c. */
-			if(!BN_is_zero(f))
-				{
-				fprintf(stderr,"GF(2^m) modular multiplication test failed!\n");
-				goto err;
-				}
-			}
-		}
-	ret = 1;
-  err:
-	BN_free(a);
-	BN_free(b[0]);
-	BN_free(b[1]);
-	BN_free(c);
-	BN_free(d);
-	BN_free(e);
-	BN_free(f);
-	BN_free(g);
-	BN_free(h);
-	return ret;
-	}
-
-int test_gf2m_mod_sqr(BIO *bp,BN_CTX *ctx)
-	{
-	BIGNUM *a,*b[2],*c,*d;
-	int i, j, ret = 0;
-	unsigned int p0[] = {163,7,6,3,0};
-	unsigned int p1[] = {193,15,0};
-
-	a=BN_new();
-	b[0]=BN_new();
-	b[1]=BN_new();
-	c=BN_new();
-	d=BN_new();
-
-	BN_GF2m_arr2poly(p0, b[0]);
-	BN_GF2m_arr2poly(p1, b[1]);
-
-	for (i=0; i<num0; i++)
-		{
-		BN_bntest_rand(a, 1024, 0, 0);
-		for (j=0; j < 2; j++)
-			{
-			BN_GF2m_mod_sqr(c, a, b[j], ctx);
-			BN_copy(d, a);
-			BN_GF2m_mod_mul(d, a, d, b[j], ctx);
-#if 0 /* make test uses ouput in bc but bc can't handle GF(2^m) arithmetic */
-			if (bp != NULL)
-				{
-				if (!results)
-					{
-					BN_print(bp,a);
-					BIO_puts(bp," ^ 2 % ");
-					BN_print(bp,b[j]);
-					BIO_puts(bp, " = ");
-					BN_print(bp,c);
-					BIO_puts(bp,"; a * a = ");
-					BN_print(bp,d);
-					BIO_puts(bp,"\n");
-					}
-				}
-#endif
-			BN_GF2m_add(d, c, d);
-			/* Test that a*a = a^2. */
-			if(!BN_is_zero(d))
-				{
-				fprintf(stderr,"GF(2^m) modular squaring test failed!\n");
-				goto err;
-				}
-			}
-		}
-	ret = 1;
-  err:
-	BN_free(a);
-	BN_free(b[0]);
-	BN_free(b[1]);
-	BN_free(c);
-	BN_free(d);
-	return ret;
-	}
-
-int test_gf2m_mod_inv(BIO *bp,BN_CTX *ctx)
-	{
-	BIGNUM *a,*b[2],*c,*d;
-	int i, j, ret = 0;
-	unsigned int p0[] = {163,7,6,3,0};
-	unsigned int p1[] = {193,15,0};
-
-	a=BN_new();
-	b[0]=BN_new();
-	b[1]=BN_new();
-	c=BN_new();
-	d=BN_new();
-
-	BN_GF2m_arr2poly(p0, b[0]);
-	BN_GF2m_arr2poly(p1, b[1]);
-
-	for (i=0; i<num0; i++)
-		{
-		BN_bntest_rand(a, 512, 0, 0); 
-		for (j=0; j < 2; j++)
-			{
-			BN_GF2m_mod_inv(c, a, b[j], ctx);
-			BN_GF2m_mod_mul(d, a, c, b[j], ctx);
-#if 0 /* make test uses ouput in bc but bc can't handle GF(2^m) arithmetic */
-			if (bp != NULL)
-				{
-				if (!results)
-					{
-					BN_print(bp,a);
-					BIO_puts(bp, " * ");
-					BN_print(bp,c);
-					BIO_puts(bp," - 1 % ");
-					BN_print(bp,b[j]);
-					BIO_puts(bp,"\n");
-					}
-				}
-#endif
-			/* Test that ((1/a)*a) = 1. */
-			if(!BN_is_one(d))
-				{
-				fprintf(stderr,"GF(2^m) modular inversion test failed!\n");
-				goto err;
-				}
-			}
-		}
-	ret = 1;
-  err:
-	BN_free(a);
-	BN_free(b[0]);
-	BN_free(b[1]);
-	BN_free(c);
-	BN_free(d);
-	return ret;
-	}
-
-int test_gf2m_mod_div(BIO *bp,BN_CTX *ctx)
-	{
-	BIGNUM *a,*b[2],*c,*d,*e,*f;
-	int i, j, ret = 0;
-	unsigned int p0[] = {163,7,6,3,0};
-	unsigned int p1[] = {193,15,0};
-
-	a=BN_new();
-	b[0]=BN_new();
-	b[1]=BN_new();
-	c=BN_new();
-	d=BN_new();
-	e=BN_new();
-	f=BN_new();
-
-	BN_GF2m_arr2poly(p0, b[0]);
-	BN_GF2m_arr2poly(p1, b[1]);
-
-	for (i=0; i<num0; i++)
-		{
-		BN_bntest_rand(a, 512, 0, 0); 
-		BN_bntest_rand(c, 512, 0, 0);
-		for (j=0; j < 2; j++)
-			{
-			BN_GF2m_mod_div(d, a, c, b[j], ctx);
-			BN_GF2m_mod_mul(e, d, c, b[j], ctx);
-			BN_GF2m_mod_div(f, a, e, b[j], ctx);
-#if 0 /* make test uses ouput in bc but bc can't handle GF(2^m) arithmetic */
-			if (bp != NULL)
-				{
-				if (!results)
-					{
-					BN_print(bp,a);
-					BIO_puts(bp, " = ");
-					BN_print(bp,c);
-					BIO_puts(bp," * ");
-					BN_print(bp,d);
-					BIO_puts(bp, " % ");
-					BN_print(bp,b[j]);
-					BIO_puts(bp,"\n");
-					}
-				}
-#endif
-			/* Test that ((a/c)*c)/a = 1. */
-			if(!BN_is_one(f))
-				{
-				fprintf(stderr,"GF(2^m) modular division test failed!\n");
-				goto err;
-				}
-			}
-		}
-	ret = 1;
-  err:
-	BN_free(a);
-	BN_free(b[0]);
-	BN_free(b[1]);
-	BN_free(c);
-	BN_free(d);
-	BN_free(e);
-	BN_free(f);
-	return ret;
-	}
-
-int test_gf2m_mod_exp(BIO *bp,BN_CTX *ctx)
-	{
-	BIGNUM *a,*b[2],*c,*d,*e,*f;
-	int i, j, ret = 0;
-	unsigned int p0[] = {163,7,6,3,0};
-	unsigned int p1[] = {193,15,0};
-
-	a=BN_new();
-	b[0]=BN_new();
-	b[1]=BN_new();
-	c=BN_new();
-	d=BN_new();
-	e=BN_new();
-	f=BN_new();
-
-	BN_GF2m_arr2poly(p0, b[0]);
-	BN_GF2m_arr2poly(p1, b[1]);
-
-	for (i=0; i<num0; i++)
-		{
-		BN_bntest_rand(a, 512, 0, 0);
-		BN_bntest_rand(c, 512, 0, 0);
-		BN_bntest_rand(d, 512, 0, 0);
-		for (j=0; j < 2; j++)
-			{
-			BN_GF2m_mod_exp(e, a, c, b[j], ctx);
-			BN_GF2m_mod_exp(f, a, d, b[j], ctx);
-			BN_GF2m_mod_mul(e, e, f, b[j], ctx);
-			BN_add(f, c, d);
-			BN_GF2m_mod_exp(f, a, f, b[j], ctx);
-#if 0 /* make test uses ouput in bc but bc can't handle GF(2^m) arithmetic */
-			if (bp != NULL)
-				{
-				if (!results)
-					{
-					BN_print(bp,a);
-					BIO_puts(bp, " ^ (");
-					BN_print(bp,c);
-					BIO_puts(bp," + ");
-					BN_print(bp,d);
-					BIO_puts(bp, ") = ");
-					BN_print(bp,e);
-					BIO_puts(bp, "; - ");
-					BN_print(bp,f);
-					BIO_puts(bp, " % ");
-					BN_print(bp,b[j]);
-					BIO_puts(bp,"\n");
-					}
-				}
-#endif
-			BN_GF2m_add(f, e, f);
-			/* Test that a^(c+d)=a^c*a^d. */
-			if(!BN_is_zero(f))
-				{
-				fprintf(stderr,"GF(2^m) modular exponentiation test failed!\n");
-				goto err;
-				}
-			}
-		}
-	ret = 1;
-  err:
-	BN_free(a);
-	BN_free(b[0]);
-	BN_free(b[1]);
-	BN_free(c);
-	BN_free(d);
-	BN_free(e);
-	BN_free(f);
-	return ret;
-	}
-
-int test_gf2m_mod_sqrt(BIO *bp,BN_CTX *ctx)
-	{
-	BIGNUM *a,*b[2],*c,*d,*e,*f;
-	int i, j, ret = 0;
-	unsigned int p0[] = {163,7,6,3,0};
-	unsigned int p1[] = {193,15,0};
-
-	a=BN_new();
-	b[0]=BN_new();
-	b[1]=BN_new();
-	c=BN_new();
-	d=BN_new();
-	e=BN_new();
-	f=BN_new();
-
-	BN_GF2m_arr2poly(p0, b[0]);
-	BN_GF2m_arr2poly(p1, b[1]);
-
-	for (i=0; i<num0; i++)
-		{
-		BN_bntest_rand(a, 512, 0, 0);
-		for (j=0; j < 2; j++)
-			{
-			BN_GF2m_mod(c, a, b[j]);
-			BN_GF2m_mod_sqrt(d, a, b[j], ctx);
-			BN_GF2m_mod_sqr(e, d, b[j], ctx);
-#if 0 /* make test uses ouput in bc but bc can't handle GF(2^m) arithmetic */
-			if (bp != NULL)
-				{
-				if (!results)
-					{
-					BN_print(bp,d);
-					BIO_puts(bp, " ^ 2 - ");
-					BN_print(bp,a);
-					BIO_puts(bp,"\n");
-					}
-				}
-#endif
-			BN_GF2m_add(f, c, e);
-			/* Test that d^2 = a, where d = sqrt(a). */
-			if(!BN_is_zero(f))
-				{
-				fprintf(stderr,"GF(2^m) modular square root test failed!\n");
-				goto err;
-				}
-			}
-		}
-	ret = 1;
-  err:
-	BN_free(a);
-	BN_free(b[0]);
-	BN_free(b[1]);
-	BN_free(c);
-	BN_free(d);
-	BN_free(e);
-	BN_free(f);
-	return ret;
-	}
-
-int test_gf2m_mod_solve_quad(BIO *bp,BN_CTX *ctx)
-	{
-	BIGNUM *a,*b[2],*c,*d,*e;
-	int i, j, s = 0, t, ret = 0;
-	unsigned int p0[] = {163,7,6,3,0};
-	unsigned int p1[] = {193,15,0};
-
-	a=BN_new();
-	b[0]=BN_new();
-	b[1]=BN_new();
-	c=BN_new();
-	d=BN_new();
-	e=BN_new();
-
-	BN_GF2m_arr2poly(p0, b[0]);
-	BN_GF2m_arr2poly(p1, b[1]);
-
-	for (i=0; i<num0; i++)
-		{
-		BN_bntest_rand(a, 512, 0, 0);
-		for (j=0; j < 2; j++)
-			{
-			t = BN_GF2m_mod_solve_quad(c, a, b[j], ctx);
-			if (t)
-				{
-				s++;
-				BN_GF2m_mod_sqr(d, c, b[j], ctx);
-				BN_GF2m_add(d, c, d);
-				BN_GF2m_mod(e, a, b[j]);
-#if 0 /* make test uses ouput in bc but bc can't handle GF(2^m) arithmetic */
-				if (bp != NULL)
-					{
-					if (!results)
-						{
-						BN_print(bp,c);
-						BIO_puts(bp, " is root of z^2 + z = ");
-						BN_print(bp,a);
-						BIO_puts(bp, " % ");
-						BN_print(bp,b[j]);
-						BIO_puts(bp, "\n");
-						}
-					}
-#endif
-				BN_GF2m_add(e, e, d);
-				/* Test that solution of quadratic c satisfies c^2 + c = a. */
-				if(!BN_is_zero(e))
-					{
-					fprintf(stderr,"GF(2^m) modular solve quadratic test failed!\n");
-					goto err;
-					}
-
-				}
-			else 
-				{
-#if 0 /* make test uses ouput in bc but bc can't handle GF(2^m) arithmetic */
-				if (bp != NULL)
-					{
-					if (!results)
-						{
-						BIO_puts(bp, "There are no roots of z^2 + z = ");
-						BN_print(bp,a);
-						BIO_puts(bp, " % ");
-						BN_print(bp,b[j]);
-						BIO_puts(bp, "\n");
-						}
-					}
-#endif
-				}
-			}
-		}
-	if (s == 0)
-		{	
-		fprintf(stderr,"All %i tests of GF(2^m) modular solve quadratic resulted in no roots;\n", num0);
-		fprintf(stderr,"this is very unlikely and probably indicates an error.\n");
-		goto err;
-		}
-	ret = 1;
-  err:
-	BN_free(a);
-	BN_free(b[0]);
-	BN_free(b[1]);
-	BN_free(c);
-	BN_free(d);
-	BN_free(e);
-	return ret;
-	}
-
-static int genprime_cb(int p, int n, BN_GENCB *arg)
-	{
-	char c='*';
-
-	if (p == 0) c='.';
-	if (p == 1) c='+';
-	if (p == 2) c='*';
-	if (p == 3) c='\n';
-	putc(c, stderr);
-	fflush(stderr);
-	return 1;
-	}
-
-int test_kron(BIO *bp, BN_CTX *ctx)
-	{
-	BN_GENCB cb;
-	BIGNUM *a,*b,*r,*t;
-	int i;
-	int legendre, kronecker;
-	int ret = 0;
-
-	a = BN_new();
-	b = BN_new();
-	r = BN_new();
-	t = BN_new();
-	if (a == NULL || b == NULL || r == NULL || t == NULL) goto err;
-
-	BN_GENCB_set(&cb, genprime_cb, NULL);
-	
-	/* We test BN_kronecker(a, b, ctx) just for  b  odd (Jacobi symbol).
-	 * In this case we know that if  b  is prime, then BN_kronecker(a, b, ctx)
-	 * is congruent to $a^{(b-1)/2}$, modulo $b$ (Legendre symbol).
-	 * So we generate a random prime  b  and compare these values
-	 * for a number of random  a's.  (That is, we run the Solovay-Strassen
-	 * primality test to confirm that  b  is prime, except that we
-	 * don't want to test whether  b  is prime but whether BN_kronecker
-	 * works.) */
-
-	if (!BN_generate_prime_ex(b, 512, 0, NULL, NULL, &cb)) goto err;
-	b->neg = rand_neg();
-	putc('\n', stderr);
-
-	for (i = 0; i < num0; i++)
-		{
-		if (!BN_bntest_rand(a, 512, 0, 0)) goto err;
-		a->neg = rand_neg();
-
-		/* t := (|b|-1)/2  (note that b is odd) */
-		if (!BN_copy(t, b)) goto err;
-		t->neg = 0;
-		if (!BN_sub_word(t, 1)) goto err;
-		if (!BN_rshift1(t, t)) goto err;
-		/* r := a^t mod b */
-		b->neg=0;
-		
-		if (!BN_mod_exp_recp(r, a, t, b, ctx)) goto err;
-		b->neg=1;
-
-		if (BN_is_word(r, 1))
-			legendre = 1;
-		else if (BN_is_zero(r))
-			legendre = 0;
-		else
-			{
-			if (!BN_add_word(r, 1)) goto err;
-			if (0 != BN_ucmp(r, b))
-				{
-				fprintf(stderr, "Legendre symbol computation failed\n");
-				goto err;
-				}
-			legendre = -1;
-			}
-		
-		kronecker = BN_kronecker(a, b, ctx);
-		if (kronecker < -1) goto err;
-		/* we actually need BN_kronecker(a, |b|) */
-		if (a->neg && b->neg)
-			kronecker = -kronecker;
-		
-		if (legendre != kronecker)
-			{
-			fprintf(stderr, "legendre != kronecker; a = ");
-			BN_print_fp(stderr, a);
-			fprintf(stderr, ", b = ");
-			BN_print_fp(stderr, b);
-			fprintf(stderr, "\n");
-			goto err;
-			}
-
-		putc('.', stderr);
-		fflush(stderr);
-		}
-
-	putc('\n', stderr);
-	fflush(stderr);
-	ret = 1;
- err:
-	if (a != NULL) BN_free(a);
-	if (b != NULL) BN_free(b);
-	if (r != NULL) BN_free(r);
-	if (t != NULL) BN_free(t);
-	return ret;
-	}
-
-int test_sqrt(BIO *bp, BN_CTX *ctx)
-	{
-	BN_GENCB cb;
-	BIGNUM *a,*p,*r;
-	int i, j;
-	int ret = 0;
-
-	a = BN_new();
-	p = BN_new();
-	r = BN_new();
-	if (a == NULL || p == NULL || r == NULL) goto err;
-
-	BN_GENCB_set(&cb, genprime_cb, NULL);
-
-	for (i = 0; i < 16; i++)
-		{
-		if (i < 8)
-			{
-			unsigned primes[8] = { 2, 3, 5, 7, 11, 13, 17, 19 };
-			
-			if (!BN_set_word(p, primes[i])) goto err;
-			}
-		else
-			{
-			if (!BN_set_word(a, 32)) goto err;
-			if (!BN_set_word(r, 2*i + 1)) goto err;
-		
-			if (!BN_generate_prime_ex(p, 256, 0, a, r, &cb)) goto err;
-			putc('\n', stderr);
-			}
-		p->neg = rand_neg();
-
-		for (j = 0; j < num2; j++)
-			{
-			/* construct 'a' such that it is a square modulo p,
-			 * but in general not a proper square and not reduced modulo p */
-			if (!BN_bntest_rand(r, 256, 0, 3)) goto err;
-			if (!BN_nnmod(r, r, p, ctx)) goto err;
-			if (!BN_mod_sqr(r, r, p, ctx)) goto err;
-			if (!BN_bntest_rand(a, 256, 0, 3)) goto err;
-			if (!BN_nnmod(a, a, p, ctx)) goto err;
-			if (!BN_mod_sqr(a, a, p, ctx)) goto err;
-			if (!BN_mul(a, a, r, ctx)) goto err;
-			if (rand_neg())
-				if (!BN_sub(a, a, p)) goto err;
-
-			if (!BN_mod_sqrt(r, a, p, ctx)) goto err;
-			if (!BN_mod_sqr(r, r, p, ctx)) goto err;
-
-			if (!BN_nnmod(a, a, p, ctx)) goto err;
-
-			if (BN_cmp(a, r) != 0)
-				{
-				fprintf(stderr, "BN_mod_sqrt failed: a = ");
-				BN_print_fp(stderr, a);
-				fprintf(stderr, ", r = ");
-				BN_print_fp(stderr, r);
-				fprintf(stderr, ", p = ");
-				BN_print_fp(stderr, p);
-				fprintf(stderr, "\n");
-				goto err;
-				}
-
-			putc('.', stderr);
-			fflush(stderr);
-			}
-		
-		putc('\n', stderr);
-		fflush(stderr);
-		}
-	ret = 1;
- err:
-	if (a != NULL) BN_free(a);
-	if (p != NULL) BN_free(p);
-	if (r != NULL) BN_free(r);
-	return ret;
-	}
-
-int test_lshift(BIO *bp,BN_CTX *ctx,BIGNUM *a_)
-	{
-	BIGNUM *a,*b,*c,*d;
-	int i;
-
-	b=BN_new();
-	c=BN_new();
-	d=BN_new();
-	BN_one(c);
-
-	if(a_)
-	    a=a_;
-	else
-	    {
-	    a=BN_new();
-	    BN_bntest_rand(a,200,0,0); /**/
-	    a->neg=rand_neg();
-	    }
-	for (i=0; i<num0; i++)
-		{
-		BN_lshift(b,a,i+1);
-		BN_add(c,c,c);
-		if (bp != NULL)
-			{
-			if (!results)
-				{
-				BN_print(bp,a);
-				BIO_puts(bp," * ");
-				BN_print(bp,c);
-				BIO_puts(bp," - ");
-				}
-			BN_print(bp,b);
-			BIO_puts(bp,"\n");
-			}
-		BN_mul(d,a,c,ctx);
-		BN_sub(d,d,b);
-		if(!BN_is_zero(d))
-		    {
-		    fprintf(stderr,"Left shift test failed!\n");
-		    fprintf(stderr,"a=");
-		    BN_print_fp(stderr,a);
-		    fprintf(stderr,"\nb=");
-		    BN_print_fp(stderr,b);
-		    fprintf(stderr,"\nc=");
-		    BN_print_fp(stderr,c);
-		    fprintf(stderr,"\nd=");
-		    BN_print_fp(stderr,d);
-		    fprintf(stderr,"\n");
-		    return 0;
-		    }
-		}
-	BN_free(a);
-	BN_free(b);
-	BN_free(c);
-	BN_free(d);
-	return(1);
-	}
-
-int test_lshift1(BIO *bp)
-	{
-	BIGNUM *a,*b,*c;
-	int i;
-
-	a=BN_new();
-	b=BN_new();
-	c=BN_new();
-
-	BN_bntest_rand(a,200,0,0); /**/
-	a->neg=rand_neg();
-	for (i=0; i<num0; i++)
-		{
-		BN_lshift1(b,a);
-		if (bp != NULL)
-			{
-			if (!results)
-				{
-				BN_print(bp,a);
-				BIO_puts(bp," * 2");
-				BIO_puts(bp," - ");
-				}
-			BN_print(bp,b);
-			BIO_puts(bp,"\n");
-			}
-		BN_add(c,a,a);
-		BN_sub(a,b,c);
-		if(!BN_is_zero(a))
-		    {
-		    fprintf(stderr,"Left shift one test failed!\n");
-		    return 0;
-		    }
-		
-		BN_copy(a,b);
-		}
-	BN_free(a);
-	BN_free(b);
-	BN_free(c);
-	return(1);
-	}
-
-int test_rshift(BIO *bp,BN_CTX *ctx)
-	{
-	BIGNUM *a,*b,*c,*d,*e;
-	int i;
-
-	a=BN_new();
-	b=BN_new();
-	c=BN_new();
-	d=BN_new();
-	e=BN_new();
-	BN_one(c);
-
-	BN_bntest_rand(a,200,0,0); /**/
-	a->neg=rand_neg();
-	for (i=0; i<num0; i++)
-		{
-		BN_rshift(b,a,i+1);
-		BN_add(c,c,c);
-		if (bp != NULL)
-			{
-			if (!results)
-				{
-				BN_print(bp,a);
-				BIO_puts(bp," / ");
-				BN_print(bp,c);
-				BIO_puts(bp," - ");
-				}
-			BN_print(bp,b);
-			BIO_puts(bp,"\n");
-			}
-		BN_div(d,e,a,c,ctx);
-		BN_sub(d,d,b);
-		if(!BN_is_zero(d))
-		    {
-		    fprintf(stderr,"Right shift test failed!\n");
-		    return 0;
-		    }
-		}
-	BN_free(a);
-	BN_free(b);
-	BN_free(c);
-	BN_free(d);
-	BN_free(e);
-	return(1);
-	}
-
-int test_rshift1(BIO *bp)
-	{
-	BIGNUM *a,*b,*c;
-	int i;
-
-	a=BN_new();
-	b=BN_new();
-	c=BN_new();
-
-	BN_bntest_rand(a,200,0,0); /**/
-	a->neg=rand_neg();
-	for (i=0; i<num0; i++)
-		{
-		BN_rshift1(b,a);
-		if (bp != NULL)
-			{
-			if (!results)
-				{
-				BN_print(bp,a);
-				BIO_puts(bp," / 2");
-				BIO_puts(bp," - ");
-				}
-			BN_print(bp,b);
-			BIO_puts(bp,"\n");
-			}
-		BN_sub(c,a,b);
-		BN_sub(c,c,b);
-		if(!BN_is_zero(c) && !BN_abs_is_word(c, 1))
-		    {
-		    fprintf(stderr,"Right shift one test failed!\n");
-		    return 0;
-		    }
-		BN_copy(a,b);
-		}
-	BN_free(a);
-	BN_free(b);
-	BN_free(c);
-	return(1);
-	}
-
-int rand_neg(void)
-	{
-	static unsigned int neg=0;
-	static int sign[8]={0,0,0,1,1,0,1,1};
-
-	return(sign[(neg++)%8]);
-	}
diff --git a/crypto/openssl/crypto/bn/divtest.c b/crypto/openssl/crypto/bn/divtest.c
deleted file mode 100644
index d3fc688f3357..000000000000
--- a/crypto/openssl/crypto/bn/divtest.c
+++ /dev/null
@@ -1,41 +0,0 @@
-#include <openssl/bn.h>
-#include <openssl/rand.h>
-
-static int Rand(n)
-{
-    unsigned char x[2];
-    RAND_pseudo_bytes(x,2);
-    return (x[0] + 2*x[1]);
-}
-
-static void bug(char *m, BIGNUM *a, BIGNUM *b)
-{
-    printf("%s!\na=",m);
-    BN_print_fp(stdout, a);
-    printf("\nb=");
-    BN_print_fp(stdout, b);
-    printf("\n");
-    fflush(stdout);
-}
-
-main()
-{
-    BIGNUM *a=BN_new(), *b=BN_new(), *c=BN_new(), *d=BN_new(),
-	*C=BN_new(), *D=BN_new();
-    BN_RECP_CTX *recp=BN_RECP_CTX_new();
-    BN_CTX *ctx=BN_CTX_new();
-
-    for(;;) {
-	BN_pseudo_rand(a,Rand(),0,0);
-	BN_pseudo_rand(b,Rand(),0,0);
-	if (BN_is_zero(b)) continue;
-
-	BN_RECP_CTX_set(recp,b,ctx);
-	if (BN_div(C,D,a,b,ctx) != 1)
-	    bug("BN_div failed",a,b);
-	if (BN_div_recp(c,d,a,recp,ctx) != 1)
-	    bug("BN_div_recp failed",a,b);
-	else if (BN_cmp(c,C) != 0 || BN_cmp(c,C) != 0)
-	    bug("mismatch",a,b);
-    }
-}
diff --git a/crypto/openssl/crypto/bn/exp.c b/crypto/openssl/crypto/bn/exp.c
deleted file mode 100644
index 4865b0ef742b..000000000000
--- a/crypto/openssl/crypto/bn/exp.c
+++ /dev/null
@@ -1,62 +0,0 @@
-/* unused */
-
-#include <stdio.h>
-#include <openssl/tmdiff.h>
-#include "bn_lcl.h"
-
-#define SIZE	256
-#define NUM	(8*8*8)
-#define MOD	(8*8*8*8*8)
-
-main(argc,argv)
-int argc;
-char *argv[];
-	{
-	BN_CTX ctx;
-	BIGNUM a,b,c,r,rr,t,l;
-	int j,i,size=SIZE,num=NUM,mod=MOD;
-	char *start,*end;
-	BN_MONT_CTX mont;
-	double d,md;
-
-	BN_MONT_CTX_init(&mont);
-	BN_CTX_init(&ctx);
-	BN_init(&a);
-	BN_init(&b);
-	BN_init(&c);
-	BN_init(&r);
-
-	start=ms_time_new();
-	end=ms_time_new();
-	while (size <= 1024*8)
-		{
-		BN_rand(&a,size,0,0);
-		BN_rand(&b,size,1,0);
-		BN_rand(&c,size,0,1);
-
-		BN_mod(&a,&a,&c,&ctx);
-
-		ms_time_get(start);
-		for (i=0; i<10; i++)
-			BN_MONT_CTX_set(&mont,&c,&ctx);
-		ms_time_get(end);
-		md=ms_time_diff(start,end);
-
-		ms_time_get(start);
-		for (i=0; i<num; i++)
-			{
-			/* bn_mull(&r,&a,&b,&ctx); */
-			/* BN_sqr(&r,&a,&ctx); */
-			BN_mod_exp_mont(&r,&a,&b,&c,&ctx,&mont);
-			}
-		ms_time_get(end);
-		d=ms_time_diff(start,end)/* *50/33 */;
-		printf("%5d bit:%6.2f %6d %6.4f %4d m_set(%5.4f)\n",size,
-			d,num,d/num,(int)((d/num)*mod),md/10.0);
-		num/=8;
-		mod/=8;
-		if (num <= 0) num=1;
-		size*=2;
-		}
-
-	}
diff --git a/crypto/openssl/crypto/bn/expspeed.c b/crypto/openssl/crypto/bn/expspeed.c
deleted file mode 100644
index 4d5f221f33ad..000000000000
--- a/crypto/openssl/crypto/bn/expspeed.c
+++ /dev/null
@@ -1,353 +0,0 @@
-/* unused */
-
-/* crypto/bn/expspeed.c */
-/* Copyright (C) 1995-1998 Eric Young (eay@cryptsoft.com)
- * All rights reserved.
- *
- * This package is an SSL implementation written
- * by Eric Young (eay@cryptsoft.com).
- * The implementation was written so as to conform with Netscapes SSL.
- * 
- * This library is free for commercial and non-commercial use as long as
- * the following conditions are aheared to.  The following conditions
- * apply to all code found in this distribution, be it the RC4, RSA,
- * lhash, DES, etc., code; not just the SSL code.  The SSL documentation
- * included with this distribution is covered by the same copyright terms
- * except that the holder is Tim Hudson (tjh@cryptsoft.com).
- * 
- * Copyright remains Eric Young's, and as such any Copyright notices in
- * the code are not to be removed.
- * If this package is used in a product, Eric Young should be given attribution
- * as the author of the parts of the library used.
- * This can be in the form of a textual message at program startup or
- * in documentation (online or textual) provided with the package.
- * 
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions
- * are met:
- * 1. Redistributions of source code must retain the copyright
- *    notice, this list of conditions and the following disclaimer.
- * 2. Redistributions in binary form must reproduce the above copyright
- *    notice, this list of conditions and the following disclaimer in the
- *    documentation and/or other materials provided with the distribution.
- * 3. All advertising materials mentioning features or use of this software
- *    must display the following acknowledgement:
- *    "This product includes cryptographic software written by
- *     Eric Young (eay@cryptsoft.com)"
- *    The word 'cryptographic' can be left out if the rouines from the library
- *    being used are not cryptographic related :-).
- * 4. If you include any Windows specific code (or a derivative thereof) from 
- *    the apps directory (application code) you must include an acknowledgement:
- *    "This product includes software written by Tim Hudson (tjh@cryptsoft.com)"
- * 
- * THIS SOFTWARE IS PROVIDED BY ERIC YOUNG ``AS IS'' AND
- * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
- * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
- * ARE DISCLAIMED.  IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE
- * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
- * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
- * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
- * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
- * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
- * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
- * SUCH DAMAGE.
- * 
- * The licence and distribution terms for any publically available version or
- * derivative of this code cannot be changed.  i.e. this code cannot simply be
- * copied and put under another distribution licence
- * [including the GNU Public Licence.]
- */
-
-/* most of this code has been pilfered from my libdes speed.c program */
-
-#define BASENUM	5000
-#define NUM_START 0
-
-
-/* determine timings for modexp, modmul, modsqr, gcd, Kronecker symbol,
- * modular inverse, or modular square roots */
-#define TEST_EXP
-#undef TEST_MUL
-#undef TEST_SQR
-#undef TEST_GCD
-#undef TEST_KRON
-#undef TEST_INV
-#undef TEST_SQRT
-#define P_MOD_64 9 /* least significant 6 bits for prime to be used for BN_sqrt timings */
-
-#if defined(TEST_EXP) + defined(TEST_MUL) + defined(TEST_SQR) + defined(TEST_GCD) + defined(TEST_KRON) + defined(TEST_INV) +defined(TEST_SQRT) != 1
-#  error "choose one test"
-#endif
-
-#if defined(TEST_INV) || defined(TEST_SQRT)
-#  define C_PRIME
-static void genprime_cb(int p, int n, void *arg);
-#endif
-
-
-
-#undef PROG
-#define PROG bnspeed_main
-
-#include <stdio.h>
-#include <stdlib.h>
-#include <signal.h>
-#include <string.h>
-#include <openssl/crypto.h>
-#include <openssl/err.h>
-#include <openssl/rand.h>
-
-#if !defined(OPENSSL_SYS_MSDOS) && (!defined(OPENSSL_SYS_VMS) || defined(__DECC)) && !defined(OPENSSL_SYS_MACOSX)
-#define TIMES
-#endif
-
-#ifndef _IRIX
-#include <time.h>
-#endif
-#ifdef TIMES
-#include <sys/types.h>
-#include <sys/times.h>
-#endif
-
-/* Depending on the VMS version, the tms structure is perhaps defined.
-   The __TMS macro will show if it was.  If it wasn't defined, we should
-   undefine TIMES, since that tells the rest of the program how things
-   should be handled.				-- Richard Levitte */
-#if defined(OPENSSL_SYS_VMS_DECC) && !defined(__TMS)
-#undef TIMES
-#endif
-
-#ifndef TIMES
-#include <sys/timeb.h>
-#endif
-
-#if defined(sun) || defined(__ultrix)
-#define _POSIX_SOURCE
-#include <limits.h>
-#include <sys/param.h>
-#endif
-
-#include <openssl/bn.h>
-#include <openssl/x509.h>
-
-/* The following if from times(3) man page.  It may need to be changed */
-#ifndef HZ
-# ifndef CLK_TCK
-#  ifndef _BSD_CLK_TCK_ /* FreeBSD hack */
-#   define HZ	100.0
-#  else /* _BSD_CLK_TCK_ */
-#   define HZ ((double)_BSD_CLK_TCK_)
-#  endif
-# else /* CLK_TCK */
-#  define HZ ((double)CLK_TCK)
-# endif
-#endif
-
-#undef BUFSIZE
-#define BUFSIZE	((long)1024*8)
-int run=0;
-
-static double Time_F(int s);
-#define START	0
-#define STOP	1
-
-static double Time_F(int s)
-	{
-	double ret;
-#ifdef TIMES
-	static struct tms tstart,tend;
-
-	if (s == START)
-		{
-		times(&tstart);
-		return(0);
-		}
-	else
-		{
-		times(&tend);
-		ret=((double)(tend.tms_utime-tstart.tms_utime))/HZ;
-		return((ret < 1e-3)?1e-3:ret);
-		}
-#else /* !times() */
-	static struct timeb tstart,tend;
-	long i;
-
-	if (s == START)
-		{
-		ftime(&tstart);
-		return(0);
-		}
-	else
-		{
-		ftime(&tend);
-		i=(long)tend.millitm-(long)tstart.millitm;
-		ret=((double)(tend.time-tstart.time))+((double)i)/1000.0;
-		return((ret < 0.001)?0.001:ret);
-		}
-#endif
-	}
-
-#define NUM_SIZES	7
-#if NUM_START > NUM_SIZES
-#   error "NUM_START > NUM_SIZES"
-#endif
-static int sizes[NUM_SIZES]={128,256,512,1024,2048,4096,8192};
-static int mul_c[NUM_SIZES]={8*8*8*8*8*8,8*8*8*8*8,8*8*8*8,8*8*8,8*8,8,1};
-/*static int sizes[NUM_SIZES]={59,179,299,419,539}; */
-
-#define RAND_SEED(string) { const char str[] = string; RAND_seed(string, sizeof str); }
-
-void do_mul_exp(BIGNUM *r,BIGNUM *a,BIGNUM *b,BIGNUM *c,BN_CTX *ctx); 
-
-int main(int argc, char **argv)
-	{
-	BN_CTX *ctx;
-	BIGNUM *a,*b,*c,*r;
-
-#if 1
-	if (!CRYPTO_set_mem_debug_functions(0,0,0,0,0))
-		abort();
-#endif
-
-	ctx=BN_CTX_new();
-	a=BN_new();
-	b=BN_new();
-	c=BN_new();
-	r=BN_new();
-
-	while (!RAND_status())
-		/* not enough bits */
-		RAND_SEED("I demand a manual recount!");
-
-	do_mul_exp(r,a,b,c,ctx);
-	return 0;
-	}
-
-void do_mul_exp(BIGNUM *r, BIGNUM *a, BIGNUM *b, BIGNUM *c, BN_CTX *ctx)
-	{
-	int i,k;
-	double tm;
-	long num;
-
-	num=BASENUM;
-	for (i=NUM_START; i<NUM_SIZES; i++)
-		{
-#ifdef C_PRIME
-#  ifdef TEST_SQRT
-		if (!BN_set_word(a, 64)) goto err;
-		if (!BN_set_word(b, P_MOD_64)) goto err;
-#    define ADD a
-#    define REM b
-#  else
-#    define ADD NULL
-#    define REM NULL
-#  endif
-		if (!BN_generate_prime(c,sizes[i],0,ADD,REM,genprime_cb,NULL)) goto err;
-		putc('\n', stderr);
-		fflush(stderr);
-#endif
-
-		for (k=0; k<num; k++)
-			{
-			if (k%50 == 0) /* Average over num/50 different choices of random numbers. */
-				{
-				if (!BN_pseudo_rand(a,sizes[i],1,0)) goto err;
-
-				if (!BN_pseudo_rand(b,sizes[i],1,0)) goto err;
-
-#ifndef C_PRIME
-				if (!BN_pseudo_rand(c,sizes[i],1,1)) goto err;
-#endif
-
-#ifdef TEST_SQRT				
-				if (!BN_mod_sqr(a,a,c,ctx)) goto err;
-				if (!BN_mod_sqr(b,b,c,ctx)) goto err;
-#else
-				if (!BN_nnmod(a,a,c,ctx)) goto err;
-				if (!BN_nnmod(b,b,c,ctx)) goto err;
-#endif
-
-				if (k == 0)
-					Time_F(START);
-				}
-
-#if defined(TEST_EXP)
-			if (!BN_mod_exp(r,a,b,c,ctx)) goto err;
-#elif defined(TEST_MUL)
-			{
-			int i = 0;
-			for (i = 0; i < 50; i++)
-				if (!BN_mod_mul(r,a,b,c,ctx)) goto err;
-			}
-#elif defined(TEST_SQR)
-			{
-			int i = 0;
-			for (i = 0; i < 50; i++)
-				{
-				if (!BN_mod_sqr(r,a,c,ctx)) goto err;
-				if (!BN_mod_sqr(r,b,c,ctx)) goto err;
-				}
-			}
-#elif defined(TEST_GCD)
-			if (!BN_gcd(r,a,b,ctx)) goto err;
-			if (!BN_gcd(r,b,c,ctx)) goto err;
-			if (!BN_gcd(r,c,a,ctx)) goto err;
-#elif defined(TEST_KRON)
-			if (-2 == BN_kronecker(a,b,ctx)) goto err;
-			if (-2 == BN_kronecker(b,c,ctx)) goto err;
-			if (-2 == BN_kronecker(c,a,ctx)) goto err;
-#elif defined(TEST_INV)
-			if (!BN_mod_inverse(r,a,c,ctx)) goto err;
-			if (!BN_mod_inverse(r,b,c,ctx)) goto err;
-#else /* TEST_SQRT */
-			if (!BN_mod_sqrt(r,a,c,ctx)) goto err;
-			if (!BN_mod_sqrt(r,b,c,ctx)) goto err;
-#endif
-			}
-		tm=Time_F(STOP);
-		printf(
-#if defined(TEST_EXP)
-			"modexp %4d ^ %4d %% %4d"
-#elif defined(TEST_MUL)
-			"50*modmul %4d %4d %4d"
-#elif defined(TEST_SQR)
-			"100*modsqr %4d %4d %4d"
-#elif defined(TEST_GCD)
-			"3*gcd %4d %4d %4d"
-#elif defined(TEST_KRON)
-			"3*kronecker %4d %4d %4d"
-#elif defined(TEST_INV)
-			"2*inv %4d %4d mod %4d"
-#else /* TEST_SQRT */
-			"2*sqrt [prime == %d (mod 64)] %4d %4d mod %4d"
-#endif
-			" -> %8.6fms %5.1f (%ld)\n",
-#ifdef TEST_SQRT
-			P_MOD_64,
-#endif
-			sizes[i],sizes[i],sizes[i],tm*1000.0/num,tm*mul_c[i]/num, num);
-		num/=7;
-		if (num <= 0) num=1;
-		}
-	return;
-
- err:
-	ERR_print_errors_fp(stderr);
-	}
-
-
-#ifdef C_PRIME
-static void genprime_cb(int p, int n, void *arg)
-	{
-	char c='*';
-
-	if (p == 0) c='.';
-	if (p == 1) c='+';
-	if (p == 2) c='*';
-	if (p == 3) c='\n';
-	putc(c, stderr);
-	fflush(stderr);
-	(void)n;
-	(void)arg;
-	}
-#endif
diff --git a/crypto/openssl/crypto/bn/exptest.c b/crypto/openssl/crypto/bn/exptest.c
deleted file mode 100644
index f598a07cf5c9..000000000000
--- a/crypto/openssl/crypto/bn/exptest.c
+++ /dev/null
@@ -1,204 +0,0 @@
-/* crypto/bn/exptest.c */
-/* Copyright (C) 1995-1998 Eric Young (eay@cryptsoft.com)
- * All rights reserved.
- *
- * This package is an SSL implementation written
- * by Eric Young (eay@cryptsoft.com).
- * The implementation was written so as to conform with Netscapes SSL.
- * 
- * This library is free for commercial and non-commercial use as long as
- * the following conditions are aheared to.  The following conditions
- * apply to all code found in this distribution, be it the RC4, RSA,
- * lhash, DES, etc., code; not just the SSL code.  The SSL documentation
- * included with this distribution is covered by the same copyright terms
- * except that the holder is Tim Hudson (tjh@cryptsoft.com).
- * 
- * Copyright remains Eric Young's, and as such any Copyright notices in
- * the code are not to be removed.
- * If this package is used in a product, Eric Young should be given attribution
- * as the author of the parts of the library used.
- * This can be in the form of a textual message at program startup or
- * in documentation (online or textual) provided with the package.
- * 
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions
- * are met:
- * 1. Redistributions of source code must retain the copyright
- *    notice, this list of conditions and the following disclaimer.
- * 2. Redistributions in binary form must reproduce the above copyright
- *    notice, this list of conditions and the following disclaimer in the
- *    documentation and/or other materials provided with the distribution.
- * 3. All advertising materials mentioning features or use of this software
- *    must display the following acknowledgement:
- *    "This product includes cryptographic software written by
- *     Eric Young (eay@cryptsoft.com)"
- *    The word 'cryptographic' can be left out if the rouines from the library
- *    being used are not cryptographic related :-).
- * 4. If you include any Windows specific code (or a derivative thereof) from 
- *    the apps directory (application code) you must include an acknowledgement:
- *    "This product includes software written by Tim Hudson (tjh@cryptsoft.com)"
- * 
- * THIS SOFTWARE IS PROVIDED BY ERIC YOUNG ``AS IS'' AND
- * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
- * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
- * ARE DISCLAIMED.  IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE
- * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
- * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
- * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
- * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
- * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
- * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
- * SUCH DAMAGE.
- * 
- * The licence and distribution terms for any publically available version or
- * derivative of this code cannot be changed.  i.e. this code cannot simply be
- * copied and put under another distribution licence
- * [including the GNU Public Licence.]
- */
-
-#include <stdio.h>
-#include <stdlib.h>
-#include <string.h>
-
-#include "../e_os.h"
-
-#include <openssl/bio.h>
-#include <openssl/bn.h>
-#include <openssl/rand.h>
-#include <openssl/err.h>
-
-#define NUM_BITS	(BN_BITS*2)
-
-static const char rnd_seed[] = "string to make the random number generator think it has entropy";
-
-int main(int argc, char *argv[])
-	{
-	BN_CTX *ctx;
-	BIO *out=NULL;
-	int i,ret;
-	unsigned char c;
-	BIGNUM *r_mont,*r_mont_const,*r_recp,*r_simple,*a,*b,*m;
-
-	RAND_seed(rnd_seed, sizeof rnd_seed); /* or BN_rand may fail, and we don't
-	                                       * even check its return value
-	                                       * (which we should) */
-
-	ERR_load_BN_strings();
-
-	ctx=BN_CTX_new();
-	if (ctx == NULL) EXIT(1);
-	r_mont=BN_new();
-	r_mont_const=BN_new();
-	r_recp=BN_new();
-	r_simple=BN_new();
-	a=BN_new();
-	b=BN_new();
-	m=BN_new();
-	if (	(r_mont == NULL) || (r_recp == NULL) ||
-		(a == NULL) || (b == NULL))
-		goto err;
-
-	out=BIO_new(BIO_s_file());
-
-	if (out == NULL) EXIT(1);
-	BIO_set_fp(out,stdout,BIO_NOCLOSE);
-
-	for (i=0; i<200; i++)
-		{
-		RAND_bytes(&c,1);
-		c=(c%BN_BITS)-BN_BITS2;
-		BN_rand(a,NUM_BITS+c,0,0);
-
-		RAND_bytes(&c,1);
-		c=(c%BN_BITS)-BN_BITS2;
-		BN_rand(b,NUM_BITS+c,0,0);
-
-		RAND_bytes(&c,1);
-		c=(c%BN_BITS)-BN_BITS2;
-		BN_rand(m,NUM_BITS+c,0,1);
-
-		BN_mod(a,a,m,ctx);
-		BN_mod(b,b,m,ctx);
-
-		ret=BN_mod_exp_mont(r_mont,a,b,m,ctx,NULL);
-		if (ret <= 0)
-			{
-			printf("BN_mod_exp_mont() problems\n");
-			ERR_print_errors(out);
-			EXIT(1);
-			}
-
-		ret=BN_mod_exp_recp(r_recp,a,b,m,ctx);
-		if (ret <= 0)
-			{
-			printf("BN_mod_exp_recp() problems\n");
-			ERR_print_errors(out);
-			EXIT(1);
-			}
-
-		ret=BN_mod_exp_simple(r_simple,a,b,m,ctx);
-		if (ret <= 0)
-			{
-			printf("BN_mod_exp_simple() problems\n");
-			ERR_print_errors(out);
-			EXIT(1);
-			}
-
-		ret=BN_mod_exp_mont_consttime(r_mont_const,a,b,m,ctx,NULL);
-		if (ret <= 0)
-			{
-			printf("BN_mod_exp_mont_consttime() problems\n");
-			ERR_print_errors(out);
-			EXIT(1);
-			}
-
-		if (BN_cmp(r_simple, r_mont) == 0
-		    && BN_cmp(r_simple,r_recp) == 0
-			&& BN_cmp(r_simple,r_mont_const) == 0)
-			{
-			printf(".");
-			fflush(stdout);
-			}
-		else
-		  	{
-			if (BN_cmp(r_simple,r_mont) != 0)
-				printf("\nsimple and mont results differ\n");
-			if (BN_cmp(r_simple,r_mont) != 0)
-				printf("\nsimple and mont const time results differ\n");
-			if (BN_cmp(r_simple,r_recp) != 0)
-				printf("\nsimple and recp results differ\n");
-
-			printf("a (%3d) = ",BN_num_bits(a));   BN_print(out,a);
-			printf("\nb (%3d) = ",BN_num_bits(b)); BN_print(out,b);
-			printf("\nm (%3d) = ",BN_num_bits(m)); BN_print(out,m);
-			printf("\nsimple   =");	BN_print(out,r_simple);
-			printf("\nrecp     =");	BN_print(out,r_recp);
-			printf("\nmont     ="); BN_print(out,r_mont);
-			printf("\nmont_ct  ="); BN_print(out,r_mont_const);
-			printf("\n");
-			EXIT(1);
-			}
-		}
-	BN_free(r_mont);
-	BN_free(r_mont_const);
-	BN_free(r_recp);
-	BN_free(r_simple);
-	BN_free(a);
-	BN_free(b);
-	BN_free(m);
-	BN_CTX_free(ctx);
-	ERR_remove_state(0);
-	CRYPTO_mem_leaks(out);
-	BIO_free(out);
-	printf(" done\n");
-	EXIT(0);
-err:
-	ERR_load_crypto_strings();
-	ERR_print_errors(out);
-#ifdef OPENSSL_SYS_NETWARE
-    printf("ERROR\n");
-#endif
-	EXIT(1);
-	return(1);
-	}
-
diff --git a/crypto/openssl/crypto/bn/todo b/crypto/openssl/crypto/bn/todo
deleted file mode 100644
index e47e381aea13..000000000000
--- a/crypto/openssl/crypto/bn/todo
+++ /dev/null
@@ -1,3 +0,0 @@
-Cache RECP_CTX values
-make the result argument independant of the inputs.
-split up the _exp_ functions
diff --git a/crypto/openssl/crypto/buffer/Makefile b/crypto/openssl/crypto/buffer/Makefile
deleted file mode 100644
index 9f3a88d2d6a1..000000000000
--- a/crypto/openssl/crypto/buffer/Makefile
+++ /dev/null
@@ -1,90 +0,0 @@
-#
-# OpenSSL/crypto/buffer/Makefile
-#
-
-DIR=	buffer
-TOP=	../..
-CC=	cc
-INCLUDES= -I.. -I$(TOP) -I../../include
-CFLAG=-g
-MAKEFILE=	Makefile
-AR=		ar r
-
-CFLAGS= $(INCLUDES) $(CFLAG)
-
-GENERAL=Makefile
-TEST=
-APPS=
-
-LIB=$(TOP)/libcrypto.a
-LIBSRC= buffer.c buf_err.c
-LIBOBJ= buffer.o buf_err.o
-
-SRC= $(LIBSRC)
-
-EXHEADER= buffer.h
-HEADER=	$(EXHEADER)
-
-ALL=    $(GENERAL) $(SRC) $(HEADER)
-
-top:
-	(cd ../..; $(MAKE) DIRS=crypto SDIRS=$(DIR) sub_all)
-
-all:	lib
-
-lib:	$(LIBOBJ)
-	$(AR) $(LIB) $(LIBOBJ)
-	$(RANLIB) $(LIB) || echo Never mind.
-	@touch lib
-
-files:
-	$(PERL) $(TOP)/util/files.pl Makefile >> $(TOP)/MINFO
-
-links:
-	@$(PERL) $(TOP)/util/mklink.pl ../../include/openssl $(EXHEADER)
-	@$(PERL) $(TOP)/util/mklink.pl ../../test $(TEST)
-	@$(PERL) $(TOP)/util/mklink.pl ../../apps $(APPS)
-
-install:
-	@[ -n "$(INSTALLTOP)" ] # should be set by top Makefile...
-	@headerlist="$(EXHEADER)"; for i in $$headerlist ; \
-	do  \
-	(cp $$i $(INSTALL_PREFIX)$(INSTALLTOP)/include/openssl/$$i; \
-	chmod 644 $(INSTALL_PREFIX)$(INSTALLTOP)/include/openssl/$$i ); \
-	done;
-
-tags:
-	ctags $(SRC)
-
-tests:
-
-lint:
-	lint -DLINT $(INCLUDES) $(SRC)>fluff
-
-depend:
-	@[ -n "$(MAKEDEPEND)" ] # should be set by upper Makefile...
-	$(MAKEDEPEND) -- $(CFLAG) $(INCLUDES) $(DEPFLAG) -- $(PROGS) $(LIBSRC)
-
-dclean:
-	$(PERL) -pe 'if (/^# DO NOT DELETE THIS LINE/) {print; exit(0);}' $(MAKEFILE) >Makefile.new
-	mv -f Makefile.new $(MAKEFILE)
-
-clean:
-	rm -f *.o *.obj lib tags core .pure .nfs* *.old *.bak fluff
-
-# DO NOT DELETE THIS LINE -- make depend depends on it.
-
-buf_err.o: ../../include/openssl/bio.h ../../include/openssl/buffer.h
-buf_err.o: ../../include/openssl/crypto.h ../../include/openssl/e_os2.h
-buf_err.o: ../../include/openssl/err.h ../../include/openssl/lhash.h
-buf_err.o: ../../include/openssl/opensslconf.h ../../include/openssl/opensslv.h
-buf_err.o: ../../include/openssl/ossl_typ.h ../../include/openssl/safestack.h
-buf_err.o: ../../include/openssl/stack.h ../../include/openssl/symhacks.h
-buf_err.o: buf_err.c
-buffer.o: ../../e_os.h ../../include/openssl/bio.h
-buffer.o: ../../include/openssl/buffer.h ../../include/openssl/crypto.h
-buffer.o: ../../include/openssl/e_os2.h ../../include/openssl/err.h
-buffer.o: ../../include/openssl/lhash.h ../../include/openssl/opensslconf.h
-buffer.o: ../../include/openssl/opensslv.h ../../include/openssl/ossl_typ.h
-buffer.o: ../../include/openssl/safestack.h ../../include/openssl/stack.h
-buffer.o: ../../include/openssl/symhacks.h ../cryptlib.h buffer.c
diff --git a/crypto/openssl/crypto/buffer/buf_err.c b/crypto/openssl/crypto/buffer/buf_err.c
deleted file mode 100644
index 3e25bbe8798a..000000000000
--- a/crypto/openssl/crypto/buffer/buf_err.c
+++ /dev/null
@@ -1,99 +0,0 @@
-/* crypto/buffer/buf_err.c */
-/* ====================================================================
- * Copyright (c) 1999-2005 The OpenSSL Project.  All rights reserved.
- *
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions
- * are met:
- *
- * 1. Redistributions of source code must retain the above copyright
- *    notice, this list of conditions and the following disclaimer. 
- *
- * 2. Redistributions in binary form must reproduce the above copyright
- *    notice, this list of conditions and the following disclaimer in
- *    the documentation and/or other materials provided with the
- *    distribution.
- *
- * 3. All advertising materials mentioning features or use of this
- *    software must display the following acknowledgment:
- *    "This product includes software developed by the OpenSSL Project
- *    for use in the OpenSSL Toolkit. (http://www.OpenSSL.org/)"
- *
- * 4. The names "OpenSSL Toolkit" and "OpenSSL Project" must not be used to
- *    endorse or promote products derived from this software without
- *    prior written permission. For written permission, please contact
- *    openssl-core@OpenSSL.org.
- *
- * 5. Products derived from this software may not be called "OpenSSL"
- *    nor may "OpenSSL" appear in their names without prior written
- *    permission of the OpenSSL Project.
- *
- * 6. Redistributions of any form whatsoever must retain the following
- *    acknowledgment:
- *    "This product includes software developed by the OpenSSL Project
- *    for use in the OpenSSL Toolkit (http://www.OpenSSL.org/)"
- *
- * THIS SOFTWARE IS PROVIDED BY THE OpenSSL PROJECT ``AS IS'' AND ANY
- * EXPRESSED OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
- * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR
- * PURPOSE ARE DISCLAIMED.  IN NO EVENT SHALL THE OpenSSL PROJECT OR
- * ITS CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
- * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
- * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
- * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
- * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
- * STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
- * ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED
- * OF THE POSSIBILITY OF SUCH DAMAGE.
- * ====================================================================
- *
- * This product includes cryptographic software written by Eric Young
- * (eay@cryptsoft.com).  This product includes software written by Tim
- * Hudson (tjh@cryptsoft.com).
- *
- */
-
-/* NOTE: this file was auto generated by the mkerr.pl script: any changes
- * made to it will be overwritten when the script next updates this file,
- * only reason strings will be preserved.
- */
-
-#include <stdio.h>
-#include <openssl/err.h>
-#include <openssl/buffer.h>
-
-/* BEGIN ERROR CODES */
-#ifndef OPENSSL_NO_ERR
-
-#define ERR_FUNC(func) ERR_PACK(ERR_LIB_BUF,func,0)
-#define ERR_REASON(reason) ERR_PACK(ERR_LIB_BUF,0,reason)
-
-static ERR_STRING_DATA BUF_str_functs[]=
-	{
-{ERR_FUNC(BUF_F_BUF_MEMDUP),	"BUF_memdup"},
-{ERR_FUNC(BUF_F_BUF_MEM_GROW),	"BUF_MEM_grow"},
-{ERR_FUNC(BUF_F_BUF_MEM_GROW_CLEAN),	"BUF_MEM_grow_clean"},
-{ERR_FUNC(BUF_F_BUF_MEM_NEW),	"BUF_MEM_new"},
-{ERR_FUNC(BUF_F_BUF_STRDUP),	"BUF_strdup"},
-{ERR_FUNC(BUF_F_BUF_STRNDUP),	"BUF_strndup"},
-{0,NULL}
-	};
-
-static ERR_STRING_DATA BUF_str_reasons[]=
-	{
-{0,NULL}
-	};
-
-#endif
-
-void ERR_load_BUF_strings(void)
-	{
-#ifndef OPENSSL_NO_ERR
-
-	if (ERR_func_error_string(BUF_str_functs[0].error) == NULL)
-		{
-		ERR_load_strings(0,BUF_str_functs);
-		ERR_load_strings(0,BUF_str_reasons);
-		}
-#endif
-	}
diff --git a/crypto/openssl/crypto/buffer/buffer.c b/crypto/openssl/crypto/buffer/buffer.c
deleted file mode 100644
index 3bf03c7eff07..000000000000
--- a/crypto/openssl/crypto/buffer/buffer.c
+++ /dev/null
@@ -1,221 +0,0 @@
-/* crypto/buffer/buffer.c */
-/* Copyright (C) 1995-1998 Eric Young (eay@cryptsoft.com)
- * All rights reserved.
- *
- * This package is an SSL implementation written
- * by Eric Young (eay@cryptsoft.com).
- * The implementation was written so as to conform with Netscapes SSL.
- * 
- * This library is free for commercial and non-commercial use as long as
- * the following conditions are aheared to.  The following conditions
- * apply to all code found in this distribution, be it the RC4, RSA,
- * lhash, DES, etc., code; not just the SSL code.  The SSL documentation
- * included with this distribution is covered by the same copyright terms
- * except that the holder is Tim Hudson (tjh@cryptsoft.com).
- * 
- * Copyright remains Eric Young's, and as such any Copyright notices in
- * the code are not to be removed.
- * If this package is used in a product, Eric Young should be given attribution
- * as the author of the parts of the library used.
- * This can be in the form of a textual message at program startup or
- * in documentation (online or textual) provided with the package.
- * 
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions
- * are met:
- * 1. Redistributions of source code must retain the copyright
- *    notice, this list of conditions and the following disclaimer.
- * 2. Redistributions in binary form must reproduce the above copyright
- *    notice, this list of conditions and the following disclaimer in the
- *    documentation and/or other materials provided with the distribution.
- * 3. All advertising materials mentioning features or use of this software
- *    must display the following acknowledgement:
- *    "This product includes cryptographic software written by
- *     Eric Young (eay@cryptsoft.com)"
- *    The word 'cryptographic' can be left out if the rouines from the library
- *    being used are not cryptographic related :-).
- * 4. If you include any Windows specific code (or a derivative thereof) from 
- *    the apps directory (application code) you must include an acknowledgement:
- *    "This product includes software written by Tim Hudson (tjh@cryptsoft.com)"
- * 
- * THIS SOFTWARE IS PROVIDED BY ERIC YOUNG ``AS IS'' AND
- * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
- * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
- * ARE DISCLAIMED.  IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE
- * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
- * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
- * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
- * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
- * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
- * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
- * SUCH DAMAGE.
- * 
- * The licence and distribution terms for any publically available version or
- * derivative of this code cannot be changed.  i.e. this code cannot simply be
- * copied and put under another distribution licence
- * [including the GNU Public Licence.]
- */
-
-#include <stdio.h>
-#include "cryptlib.h"
-#include <openssl/buffer.h>
-
-BUF_MEM *BUF_MEM_new(void)
-	{
-	BUF_MEM *ret;
-
-	ret=OPENSSL_malloc(sizeof(BUF_MEM));
-	if (ret == NULL)
-		{
-		BUFerr(BUF_F_BUF_MEM_NEW,ERR_R_MALLOC_FAILURE);
-		return(NULL);
-		}
-	ret->length=0;
-	ret->max=0;
-	ret->data=NULL;
-	return(ret);
-	}
-
-void BUF_MEM_free(BUF_MEM *a)
-	{
-	if(a == NULL)
-	    return;
-
-	if (a->data != NULL)
-		{
-		memset(a->data,0,(unsigned int)a->max);
-		OPENSSL_free(a->data);
-		}
-	OPENSSL_free(a);
-	}
-
-int BUF_MEM_grow(BUF_MEM *str, int len)
-	{
-	char *ret;
-	unsigned int n;
-
-	if (str->length >= len)
-		{
-		str->length=len;
-		return(len);
-		}
-	if (str->max >= len)
-		{
-		memset(&str->data[str->length],0,len-str->length);
-		str->length=len;
-		return(len);
-		}
-	n=(len+3)/3*4;
-	if (str->data == NULL)
-		ret=OPENSSL_malloc(n);
-	else
-		ret=OPENSSL_realloc(str->data,n);
-	if (ret == NULL)
-		{
-		BUFerr(BUF_F_BUF_MEM_GROW,ERR_R_MALLOC_FAILURE);
-		len=0;
-		}
-	else
-		{
-		str->data=ret;
-		str->max=n;
-		memset(&str->data[str->length],0,len-str->length);
-		str->length=len;
-		}
-	return(len);
-	}
-
-int BUF_MEM_grow_clean(BUF_MEM *str, int len)
-	{
-	char *ret;
-	unsigned int n;
-
-	if (str->length >= len)
-		{
-		memset(&str->data[len],0,str->length-len);
-		str->length=len;
-		return(len);
-		}
-	if (str->max >= len)
-		{
-		memset(&str->data[str->length],0,len-str->length);
-		str->length=len;
-		return(len);
-		}
-	n=(len+3)/3*4;
-	if (str->data == NULL)
-		ret=OPENSSL_malloc(n);
-	else
-		ret=OPENSSL_realloc_clean(str->data,str->max,n);
-	if (ret == NULL)
-		{
-		BUFerr(BUF_F_BUF_MEM_GROW_CLEAN,ERR_R_MALLOC_FAILURE);
-		len=0;
-		}
-	else
-		{
-		str->data=ret;
-		str->max=n;
-		memset(&str->data[str->length],0,len-str->length);
-		str->length=len;
-		}
-	return(len);
-	}
-
-char *BUF_strdup(const char *str)
-	{
-	if (str == NULL) return(NULL);
-	return BUF_strndup(str, strlen(str));
-	}
-
-char *BUF_strndup(const char *str, size_t siz)
-	{
-	char *ret;
-
-	if (str == NULL) return(NULL);
-
-	ret=OPENSSL_malloc(siz+1);
-	if (ret == NULL) 
-		{
-		BUFerr(BUF_F_BUF_STRNDUP,ERR_R_MALLOC_FAILURE);
-		return(NULL);
-		}
-	BUF_strlcpy(ret,str,siz+1);
-	return(ret);
-	}
-
-void *BUF_memdup(const void *data, size_t siz)
-	{
-	void *ret;
-
-	if (data == NULL) return(NULL);
-
-	ret=OPENSSL_malloc(siz);
-	if (ret == NULL) 
-		{
-		BUFerr(BUF_F_BUF_MEMDUP,ERR_R_MALLOC_FAILURE);
-		return(NULL);
-		}
-	return memcpy(ret, data, siz);
-	}	
-
-size_t BUF_strlcpy(char *dst, const char *src, size_t size)
-	{
-	size_t l = 0;
-	for(; size > 1 && *src; size--)
-		{
-		*dst++ = *src++;
-		l++;
-		}
-	if (size)
-		*dst = '\0';
-	return l + strlen(src);
-	}
-
-size_t BUF_strlcat(char *dst, const char *src, size_t size)
-	{
-	size_t l = 0;
-	for(; size > 0 && *dst; size--, dst++)
-		l++;
-	return l + BUF_strlcpy(dst, src, size);
-	}
diff --git a/crypto/openssl/crypto/buffer/buffer.h b/crypto/openssl/crypto/buffer/buffer.h
deleted file mode 100644
index 1db960745037..000000000000
--- a/crypto/openssl/crypto/buffer/buffer.h
+++ /dev/null
@@ -1,118 +0,0 @@
-/* crypto/buffer/buffer.h */
-/* Copyright (C) 1995-1998 Eric Young (eay@cryptsoft.com)
- * All rights reserved.
- *
- * This package is an SSL implementation written
- * by Eric Young (eay@cryptsoft.com).
- * The implementation was written so as to conform with Netscapes SSL.
- * 
- * This library is free for commercial and non-commercial use as long as
- * the following conditions are aheared to.  The following conditions
- * apply to all code found in this distribution, be it the RC4, RSA,
- * lhash, DES, etc., code; not just the SSL code.  The SSL documentation
- * included with this distribution is covered by the same copyright terms
- * except that the holder is Tim Hudson (tjh@cryptsoft.com).
- * 
- * Copyright remains Eric Young's, and as such any Copyright notices in
- * the code are not to be removed.
- * If this package is used in a product, Eric Young should be given attribution
- * as the author of the parts of the library used.
- * This can be in the form of a textual message at program startup or
- * in documentation (online or textual) provided with the package.
- * 
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions
- * are met:
- * 1. Redistributions of source code must retain the copyright
- *    notice, this list of conditions and the following disclaimer.
- * 2. Redistributions in binary form must reproduce the above copyright
- *    notice, this list of conditions and the following disclaimer in the
- *    documentation and/or other materials provided with the distribution.
- * 3. All advertising materials mentioning features or use of this software
- *    must display the following acknowledgement:
- *    "This product includes cryptographic software written by
- *     Eric Young (eay@cryptsoft.com)"
- *    The word 'cryptographic' can be left out if the rouines from the library
- *    being used are not cryptographic related :-).
- * 4. If you include any Windows specific code (or a derivative thereof) from 
- *    the apps directory (application code) you must include an acknowledgement:
- *    "This product includes software written by Tim Hudson (tjh@cryptsoft.com)"
- * 
- * THIS SOFTWARE IS PROVIDED BY ERIC YOUNG ``AS IS'' AND
- * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
- * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
- * ARE DISCLAIMED.  IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE
- * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
- * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
- * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
- * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
- * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
- * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
- * SUCH DAMAGE.
- * 
- * The licence and distribution terms for any publically available version or
- * derivative of this code cannot be changed.  i.e. this code cannot simply be
- * copied and put under another distribution licence
- * [including the GNU Public Licence.]
- */
-
-#ifndef HEADER_BUFFER_H
-#define HEADER_BUFFER_H
-
-#include <openssl/ossl_typ.h>
-
-#ifdef  __cplusplus
-extern "C" {
-#endif
-
-#include <stddef.h>
-
-#if !defined(NO_SYS_TYPES_H)
-#include <sys/types.h>
-#endif
-
-/* Already declared in ossl_typ.h */
-/* typedef struct buf_mem_st BUF_MEM; */
-
-struct buf_mem_st
-	{
-	int length;	/* current number of bytes */
-	char *data;
-	int max;	/* size of buffer */
-	};
-
-BUF_MEM *BUF_MEM_new(void);
-void	BUF_MEM_free(BUF_MEM *a);
-int	BUF_MEM_grow(BUF_MEM *str, int len);
-int	BUF_MEM_grow_clean(BUF_MEM *str, int len);
-char *	BUF_strdup(const char *str);
-char *	BUF_strndup(const char *str, size_t siz);
-void *	BUF_memdup(const void *data, size_t siz);
-
-/* safe string functions */
-size_t BUF_strlcpy(char *dst,const char *src,size_t siz);
-size_t BUF_strlcat(char *dst,const char *src,size_t siz);
-
-
-/* BEGIN ERROR CODES */
-/* The following lines are auto generated by the script mkerr.pl. Any changes
- * made after this point may be overwritten when the script is next run.
- */
-void ERR_load_BUF_strings(void);
-
-/* Error codes for the BUF functions. */
-
-/* Function codes. */
-#define BUF_F_BUF_MEMDUP				 103
-#define BUF_F_BUF_MEM_GROW				 100
-#define BUF_F_BUF_MEM_GROW_CLEAN			 105
-#define BUF_F_BUF_MEM_NEW				 101
-#define BUF_F_BUF_STRDUP				 102
-#define BUF_F_BUF_STRNDUP				 104
-
-/* Reason codes. */
-
-#ifdef  __cplusplus
-}
-#endif
-#endif
diff --git a/crypto/openssl/crypto/camellia/Makefile b/crypto/openssl/crypto/camellia/Makefile
deleted file mode 100644
index 1579de5ce51f..000000000000
--- a/crypto/openssl/crypto/camellia/Makefile
+++ /dev/null
@@ -1,103 +0,0 @@
-#
-# crypto/camellia/Makefile
-#
-
-DIR= camellia
-TOP=	../..
-CC=	cc
-CPP=	$(CC) -E
-INCLUDES=
-CFLAG=-g
-MAKEFILE=	Makefile
-AR=		ar r
-
-CAMELLIA_ASM_OBJ=
-
-CFLAGS= $(INCLUDES) $(CFLAG)
-ASFLAGS= $(INCLUDES) $(ASFLAG)
-AFLAGS= $(ASFLAGS)
-
-GENERAL=Makefile
-#TEST=camelliatest.c
-APPS=
-
-LIB=$(TOP)/libcrypto.a
-LIBSRC=camellia.c cmll_misc.c cmll_ecb.c cmll_cbc.c cmll_ofb.c \
-	   cmll_cfb.c cmll_ctr.c 
-
-LIBOBJ= camellia.o cmll_misc.o cmll_ecb.o cmll_cbc.o cmll_ofb.o \
-		cmll_cfb.o cmll_ctr.o $(CAMELLIA_ASM_OBJ)
-
-SRC= $(LIBSRC)
-
-EXHEADER= camellia.h
-HEADER= cmll_locl.h $(EXHEADER)
-
-ALL=    $(GENERAL) $(SRC) $(HEADER)
-
-top:
-	(cd ../..; $(MAKE) DIRS=crypto SDIRS=$(DIR) sub_all)
-
-all:	lib
-
-lib:	$(LIBOBJ)
-	$(AR) $(LIB) $(LIBOBJ)
-	$(RANLIB) $(LIB) || echo Never mind.
-	@touch lib
-
-$(LIBOBJ): $(LIBSRC)
-
-
-files:
-	$(PERL) $(TOP)/util/files.pl Makefile >> $(TOP)/MINFO
-
-links:
-	@$(PERL) $(TOP)/util/mklink.pl ../../include/openssl $(EXHEADER)
-	@$(PERL) $(TOP)/util/mklink.pl ../../test $(TEST)
-	@$(PERL) $(TOP)/util/mklink.pl ../../apps $(APPS)
-
-install:
-	@[ -n "$(INSTALLTOP)" ] # should be set by top Makefile...
-	@headerlist="$(EXHEADER)"; for i in $$headerlist ; \
-	do  \
-	(cp $$i $(INSTALL_PREFIX)$(INSTALLTOP)/include/openssl/$$i; \
-	chmod 644 $(INSTALL_PREFIX)$(INSTALLTOP)/include/openssl/$$i ); \
-	done;
-
-tags:
-	ctags $(SRC)
-
-tests:
-
-lint:
-	lint -DLINT $(INCLUDES) $(SRC)>fluff
-
-depend:
-	@[ -n "$(MAKEDEPEND)" ] # should be set by upper Makefile...
-	$(MAKEDEPEND) -- $(CFLAG) $(INCLUDES) $(DEPFLAG) -- $(PROGS) $(LIBSRC)
-
-dclean:
-	$(PERL) -pe 'if (/^# DO NOT DELETE THIS LINE/) {print; exit(0);}' $(MAKEFILE) >Makefile.new
-	mv -f Makefile.new $(MAKEFILE)
-
-clean:
-	rm -f *.s *.o *.obj lib tags core .pure .nfs* *.old *.bak fluff
-
-# DO NOT DELETE THIS LINE -- make depend depends on it.
-
-camellia.o: ../../include/openssl/e_os2.h ../../include/openssl/opensslconf.h
-camellia.o: camellia.c camellia.h cmll_locl.h
-cmll_cbc.o: ../../include/openssl/camellia.h ../../include/openssl/e_os2.h
-cmll_cbc.o: ../../include/openssl/opensslconf.h cmll_cbc.c cmll_locl.h
-cmll_cfb.o: ../../e_os.h ../../include/openssl/camellia.h
-cmll_cfb.o: ../../include/openssl/e_os2.h ../../include/openssl/opensslconf.h
-cmll_cfb.o: cmll_cfb.c cmll_locl.h
-cmll_ctr.o: ../../include/openssl/camellia.h ../../include/openssl/e_os2.h
-cmll_ctr.o: ../../include/openssl/opensslconf.h cmll_ctr.c cmll_locl.h
-cmll_ecb.o: ../../include/openssl/camellia.h ../../include/openssl/e_os2.h
-cmll_ecb.o: ../../include/openssl/opensslconf.h cmll_ecb.c cmll_locl.h
-cmll_misc.o: ../../include/openssl/camellia.h ../../include/openssl/e_os2.h
-cmll_misc.o: ../../include/openssl/opensslconf.h
-cmll_misc.o: ../../include/openssl/opensslv.h cmll_locl.h cmll_misc.c
-cmll_ofb.o: ../../include/openssl/camellia.h ../../include/openssl/e_os2.h
-cmll_ofb.o: ../../include/openssl/opensslconf.h cmll_locl.h cmll_ofb.c
diff --git a/crypto/openssl/crypto/camellia/camellia.c b/crypto/openssl/crypto/camellia/camellia.c
deleted file mode 100644
index 491c26b39e96..000000000000
--- a/crypto/openssl/crypto/camellia/camellia.c
+++ /dev/null
@@ -1,1624 +0,0 @@
-/* crypto/camellia/camellia.c -*- mode:C; c-file-style: "eay" -*- */
-/* ====================================================================
- * Copyright 2006 NTT (Nippon Telegraph and Telephone Corporation) . 
- * ALL RIGHTS RESERVED.
- *
- * Intellectual Property information for Camellia:
- *     http://info.isl.ntt.co.jp/crypt/eng/info/chiteki.html
- *
- * News Release for Announcement of Camellia open source:
- *     http://www.ntt.co.jp/news/news06e/0604/060413a.html
- *
- * The Camellia Code included herein is developed by
- * NTT (Nippon Telegraph and Telephone Corporation), and is contributed
- * to the OpenSSL project.
- *
- * The Camellia Code is licensed pursuant to the OpenSSL open source
- * license provided below.
- */
-/* ====================================================================
- * Copyright (c) 2006 The OpenSSL Project.  All rights reserved.
- *
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions
- * are met:
- *
- * 1. Redistributions of source code must retain the above copyright
- *    notice, this list of conditions and the following disclaimer. 
- *
- * 2. Redistributions in binary form must reproduce the above copyright
- *    notice, this list of conditions and the following disclaimer in
- *    the documentation and/or other materials provided with the
- *    distribution.
- *
- * 3. All advertising materials mentioning features or use of this
- *    software must display the following acknowledgment:
- *    "This product includes software developed by the OpenSSL Project
- *    for use in the OpenSSL Toolkit. (http://www.openssl.org/)"
- *
- * 4. The names "OpenSSL Toolkit" and "OpenSSL Project" must not be used to
- *    endorse or promote products derived from this software without
- *    prior written permission. For written permission, please contact
- *    openssl-core@openssl.org.
- *
- * 5. Products derived from this software may not be called "OpenSSL"
- *    nor may "OpenSSL" appear in their names without prior written
- *    permission of the OpenSSL Project.
- *
- * 6. Redistributions of any form whatsoever must retain the following
- *    acknowledgment:
- *    "This product includes software developed by the OpenSSL Project
- *    for use in the OpenSSL Toolkit (http://www.openssl.org/)"
- *
- * THIS SOFTWARE IS PROVIDED BY THE OpenSSL PROJECT ``AS IS'' AND ANY
- * EXPRESSED OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
- * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR
- * PURPOSE ARE DISCLAIMED.  IN NO EVENT SHALL THE OpenSSL PROJECT OR
- * ITS CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
- * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
- * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
- * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
- * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
- * STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
- * ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED
- * OF THE POSSIBILITY OF SUCH DAMAGE.
- * ====================================================================
- */
-
-/* Algorithm Specification 
-   http://info.isl.ntt.co.jp/crypt/eng/camellia/specifications.html
-*/
-
-
-#include <string.h>
-#include <stdlib.h>
-
-#include "camellia.h"
-#include "cmll_locl.h"
-
-/* key constants */
-#define CAMELLIA_SIGMA1L (0xA09E667FL)
-#define CAMELLIA_SIGMA1R (0x3BCC908BL)
-#define CAMELLIA_SIGMA2L (0xB67AE858L)
-#define CAMELLIA_SIGMA2R (0x4CAA73B2L)
-#define CAMELLIA_SIGMA3L (0xC6EF372FL)
-#define CAMELLIA_SIGMA3R (0xE94F82BEL)
-#define CAMELLIA_SIGMA4L (0x54FF53A5L)
-#define CAMELLIA_SIGMA4R (0xF1D36F1CL)
-#define CAMELLIA_SIGMA5L (0x10E527FAL)
-#define CAMELLIA_SIGMA5R (0xDE682D1DL)
-#define CAMELLIA_SIGMA6L (0xB05688C2L)
-#define CAMELLIA_SIGMA6R (0xB3E6C1FDL)
-
-/*
- *  macros
- */
-
-/* e is pointer of subkey */
-#define CamelliaSubkeyL(INDEX) (subkey[(INDEX)*2])
-#define CamelliaSubkeyR(INDEX) (subkey[(INDEX)*2 + 1])
-
-/* rotation right shift 1byte */
-#define CAMELLIA_RR8(x) (((x) >> 8) + ((x) << 24))
-/* rotation left shift 1bit */
-#define CAMELLIA_RL1(x) (((x) << 1) + ((x) >> 31))
-/* rotation left shift 1byte */
-#define CAMELLIA_RL8(x) (((x) << 8) + ((x) >> 24))
-
-#define CAMELLIA_ROLDQ(ll, lr, rl, rr, w0, w1, bits)	\
-do							\
-	{						\
-	w0 = ll;					\
-	ll = (ll << bits) + (lr >> (32 - bits));	\
-	lr = (lr << bits) + (rl >> (32 - bits));	\
-	rl = (rl << bits) + (rr >> (32 - bits));	\
-	rr = (rr << bits) + (w0 >> (32 - bits));	\
-	} while(0)
-
-#define CAMELLIA_ROLDQo32(ll, lr, rl, rr, w0, w1, bits)	\
-do							\
-	{						\
-	w0 = ll;					\
-	w1 = lr;					\
-	ll = (lr << (bits - 32)) + (rl >> (64 - bits));	\
-	lr = (rl << (bits - 32)) + (rr >> (64 - bits));	\
-	rl = (rr << (bits - 32)) + (w0 >> (64 - bits));	\
-	rr = (w0 << (bits - 32)) + (w1 >> (64 - bits));	\
-	} while(0)
-
-#define CAMELLIA_SP1110(INDEX) (camellia_sp1110[(INDEX)])
-#define CAMELLIA_SP0222(INDEX) (camellia_sp0222[(INDEX)])
-#define CAMELLIA_SP3033(INDEX) (camellia_sp3033[(INDEX)])
-#define CAMELLIA_SP4404(INDEX) (camellia_sp4404[(INDEX)])
-
-#define CAMELLIA_F(xl, xr, kl, kr, yl, yr, il, ir, t0, t1)		\
-do									\
-	{								\
-	il = xl ^ kl;							\
-	ir = xr ^ kr;							\
-	t0 = il >> 16;							\
-	t1 = ir >> 16;							\
-	yl = CAMELLIA_SP1110(ir & 0xff)					\
-		^ CAMELLIA_SP0222((t1 >> 8) & 0xff)			\
-		^ CAMELLIA_SP3033(t1 & 0xff)				\
-		^ CAMELLIA_SP4404((ir >> 8) & 0xff);			\
-	yr = CAMELLIA_SP1110((t0 >> 8) & 0xff)				\
-		^ CAMELLIA_SP0222(t0 & 0xff)				\
-		^ CAMELLIA_SP3033((il >> 8) & 0xff)			\
-		^ CAMELLIA_SP4404(il & 0xff);				\
-	yl ^= yr;							\
-	yr = CAMELLIA_RR8(yr);						\
-	yr ^= yl;							\
-	} while(0)
-
-
-/*
- * for speed up
- *
- */
-#define CAMELLIA_FLS(ll, lr, rl, rr, kll, klr, krl, krr, t0, t1, t2, t3) \
-do									\
-	{								\
-	t0 = kll;							\
-	t0 &= ll;							\
-	lr ^= CAMELLIA_RL1(t0);						\
-	t1 = klr;							\
-	t1 |= lr;							\
-	ll ^= t1;							\
-									\
-	t2 = krr;							\
-	t2 |= rr;							\
-	rl ^= t2;							\
-	t3 = krl;							\
-	t3 &= rl;							\
-	rr ^= CAMELLIA_RL1(t3);						\
-	} while(0)
-
-#define CAMELLIA_ROUNDSM(xl, xr, kl, kr, yl, yr, il, ir, t0, t1)	\
-do									\
-	{								\
-	il = xl;							\
-	ir = xr;							\
-	t0 = il >> 16;							\
-	t1 = ir >> 16;							\
-	ir = CAMELLIA_SP1110(ir & 0xff)					\
-		^ CAMELLIA_SP0222((t1 >> 8) & 0xff)			\
-		^ CAMELLIA_SP3033(t1 & 0xff)				\
-		^ CAMELLIA_SP4404((ir >> 8) & 0xff);			\
-	il = CAMELLIA_SP1110((t0 >> 8) & 0xff)				\
-		^ CAMELLIA_SP0222(t0 & 0xff)				\
-		^ CAMELLIA_SP3033((il >> 8) & 0xff)			\
-		^ CAMELLIA_SP4404(il & 0xff);				\
-	il ^= kl;							\
-	ir ^= kr;							\
-	ir ^= il;							\
-	il = CAMELLIA_RR8(il);						\
-	il ^= ir;							\
-	yl ^= ir;							\
-	yr ^= il;							\
-	} while(0)
-
-static const u32 camellia_sp1110[256] =
-	{
-	0x70707000,0x82828200,0x2c2c2c00,0xececec00,
-	0xb3b3b300,0x27272700,0xc0c0c000,0xe5e5e500,
-	0xe4e4e400,0x85858500,0x57575700,0x35353500,
-	0xeaeaea00,0x0c0c0c00,0xaeaeae00,0x41414100,
-	0x23232300,0xefefef00,0x6b6b6b00,0x93939300,
-	0x45454500,0x19191900,0xa5a5a500,0x21212100,
-	0xededed00,0x0e0e0e00,0x4f4f4f00,0x4e4e4e00,
-	0x1d1d1d00,0x65656500,0x92929200,0xbdbdbd00,
-	0x86868600,0xb8b8b800,0xafafaf00,0x8f8f8f00,
-	0x7c7c7c00,0xebebeb00,0x1f1f1f00,0xcecece00,
-	0x3e3e3e00,0x30303000,0xdcdcdc00,0x5f5f5f00,
-	0x5e5e5e00,0xc5c5c500,0x0b0b0b00,0x1a1a1a00,
-	0xa6a6a600,0xe1e1e100,0x39393900,0xcacaca00,
-	0xd5d5d500,0x47474700,0x5d5d5d00,0x3d3d3d00,
-	0xd9d9d900,0x01010100,0x5a5a5a00,0xd6d6d600,
-	0x51515100,0x56565600,0x6c6c6c00,0x4d4d4d00,
-	0x8b8b8b00,0x0d0d0d00,0x9a9a9a00,0x66666600,
-	0xfbfbfb00,0xcccccc00,0xb0b0b000,0x2d2d2d00,
-	0x74747400,0x12121200,0x2b2b2b00,0x20202000,
-	0xf0f0f000,0xb1b1b100,0x84848400,0x99999900,
-	0xdfdfdf00,0x4c4c4c00,0xcbcbcb00,0xc2c2c200,
-	0x34343400,0x7e7e7e00,0x76767600,0x05050500,
-	0x6d6d6d00,0xb7b7b700,0xa9a9a900,0x31313100,
-	0xd1d1d100,0x17171700,0x04040400,0xd7d7d700,
-	0x14141400,0x58585800,0x3a3a3a00,0x61616100,
-	0xdedede00,0x1b1b1b00,0x11111100,0x1c1c1c00,
-	0x32323200,0x0f0f0f00,0x9c9c9c00,0x16161600,
-	0x53535300,0x18181800,0xf2f2f200,0x22222200,
-	0xfefefe00,0x44444400,0xcfcfcf00,0xb2b2b200,
-	0xc3c3c300,0xb5b5b500,0x7a7a7a00,0x91919100,
-	0x24242400,0x08080800,0xe8e8e800,0xa8a8a800,
-	0x60606000,0xfcfcfc00,0x69696900,0x50505000,
-	0xaaaaaa00,0xd0d0d000,0xa0a0a000,0x7d7d7d00,
-	0xa1a1a100,0x89898900,0x62626200,0x97979700,
-	0x54545400,0x5b5b5b00,0x1e1e1e00,0x95959500,
-	0xe0e0e000,0xffffff00,0x64646400,0xd2d2d200,
-	0x10101000,0xc4c4c400,0x00000000,0x48484800,
-	0xa3a3a300,0xf7f7f700,0x75757500,0xdbdbdb00,
-	0x8a8a8a00,0x03030300,0xe6e6e600,0xdadada00,
-	0x09090900,0x3f3f3f00,0xdddddd00,0x94949400,
-	0x87878700,0x5c5c5c00,0x83838300,0x02020200,
-	0xcdcdcd00,0x4a4a4a00,0x90909000,0x33333300,
-	0x73737300,0x67676700,0xf6f6f600,0xf3f3f300,
-	0x9d9d9d00,0x7f7f7f00,0xbfbfbf00,0xe2e2e200,
-	0x52525200,0x9b9b9b00,0xd8d8d800,0x26262600,
-	0xc8c8c800,0x37373700,0xc6c6c600,0x3b3b3b00,
-	0x81818100,0x96969600,0x6f6f6f00,0x4b4b4b00,
-	0x13131300,0xbebebe00,0x63636300,0x2e2e2e00,
-	0xe9e9e900,0x79797900,0xa7a7a700,0x8c8c8c00,
-	0x9f9f9f00,0x6e6e6e00,0xbcbcbc00,0x8e8e8e00,
-	0x29292900,0xf5f5f500,0xf9f9f900,0xb6b6b600,
-	0x2f2f2f00,0xfdfdfd00,0xb4b4b400,0x59595900,
-	0x78787800,0x98989800,0x06060600,0x6a6a6a00,
-	0xe7e7e700,0x46464600,0x71717100,0xbababa00,
-	0xd4d4d400,0x25252500,0xababab00,0x42424200,
-	0x88888800,0xa2a2a200,0x8d8d8d00,0xfafafa00,
-	0x72727200,0x07070700,0xb9b9b900,0x55555500,
-	0xf8f8f800,0xeeeeee00,0xacacac00,0x0a0a0a00,
-	0x36363600,0x49494900,0x2a2a2a00,0x68686800,
-	0x3c3c3c00,0x38383800,0xf1f1f100,0xa4a4a400,
-	0x40404000,0x28282800,0xd3d3d300,0x7b7b7b00,
-	0xbbbbbb00,0xc9c9c900,0x43434300,0xc1c1c100,
-	0x15151500,0xe3e3e300,0xadadad00,0xf4f4f400,
-	0x77777700,0xc7c7c700,0x80808000,0x9e9e9e00,
-	};
-
-static const u32 camellia_sp0222[256] =
-	{
-	0x00e0e0e0,0x00050505,0x00585858,0x00d9d9d9,
-	0x00676767,0x004e4e4e,0x00818181,0x00cbcbcb,
-	0x00c9c9c9,0x000b0b0b,0x00aeaeae,0x006a6a6a,
-	0x00d5d5d5,0x00181818,0x005d5d5d,0x00828282,
-	0x00464646,0x00dfdfdf,0x00d6d6d6,0x00272727,
-	0x008a8a8a,0x00323232,0x004b4b4b,0x00424242,
-	0x00dbdbdb,0x001c1c1c,0x009e9e9e,0x009c9c9c,
-	0x003a3a3a,0x00cacaca,0x00252525,0x007b7b7b,
-	0x000d0d0d,0x00717171,0x005f5f5f,0x001f1f1f,
-	0x00f8f8f8,0x00d7d7d7,0x003e3e3e,0x009d9d9d,
-	0x007c7c7c,0x00606060,0x00b9b9b9,0x00bebebe,
-	0x00bcbcbc,0x008b8b8b,0x00161616,0x00343434,
-	0x004d4d4d,0x00c3c3c3,0x00727272,0x00959595,
-	0x00ababab,0x008e8e8e,0x00bababa,0x007a7a7a,
-	0x00b3b3b3,0x00020202,0x00b4b4b4,0x00adadad,
-	0x00a2a2a2,0x00acacac,0x00d8d8d8,0x009a9a9a,
-	0x00171717,0x001a1a1a,0x00353535,0x00cccccc,
-	0x00f7f7f7,0x00999999,0x00616161,0x005a5a5a,
-	0x00e8e8e8,0x00242424,0x00565656,0x00404040,
-	0x00e1e1e1,0x00636363,0x00090909,0x00333333,
-	0x00bfbfbf,0x00989898,0x00979797,0x00858585,
-	0x00686868,0x00fcfcfc,0x00ececec,0x000a0a0a,
-	0x00dadada,0x006f6f6f,0x00535353,0x00626262,
-	0x00a3a3a3,0x002e2e2e,0x00080808,0x00afafaf,
-	0x00282828,0x00b0b0b0,0x00747474,0x00c2c2c2,
-	0x00bdbdbd,0x00363636,0x00222222,0x00383838,
-	0x00646464,0x001e1e1e,0x00393939,0x002c2c2c,
-	0x00a6a6a6,0x00303030,0x00e5e5e5,0x00444444,
-	0x00fdfdfd,0x00888888,0x009f9f9f,0x00656565,
-	0x00878787,0x006b6b6b,0x00f4f4f4,0x00232323,
-	0x00484848,0x00101010,0x00d1d1d1,0x00515151,
-	0x00c0c0c0,0x00f9f9f9,0x00d2d2d2,0x00a0a0a0,
-	0x00555555,0x00a1a1a1,0x00414141,0x00fafafa,
-	0x00434343,0x00131313,0x00c4c4c4,0x002f2f2f,
-	0x00a8a8a8,0x00b6b6b6,0x003c3c3c,0x002b2b2b,
-	0x00c1c1c1,0x00ffffff,0x00c8c8c8,0x00a5a5a5,
-	0x00202020,0x00898989,0x00000000,0x00909090,
-	0x00474747,0x00efefef,0x00eaeaea,0x00b7b7b7,
-	0x00151515,0x00060606,0x00cdcdcd,0x00b5b5b5,
-	0x00121212,0x007e7e7e,0x00bbbbbb,0x00292929,
-	0x000f0f0f,0x00b8b8b8,0x00070707,0x00040404,
-	0x009b9b9b,0x00949494,0x00212121,0x00666666,
-	0x00e6e6e6,0x00cecece,0x00ededed,0x00e7e7e7,
-	0x003b3b3b,0x00fefefe,0x007f7f7f,0x00c5c5c5,
-	0x00a4a4a4,0x00373737,0x00b1b1b1,0x004c4c4c,
-	0x00919191,0x006e6e6e,0x008d8d8d,0x00767676,
-	0x00030303,0x002d2d2d,0x00dedede,0x00969696,
-	0x00262626,0x007d7d7d,0x00c6c6c6,0x005c5c5c,
-	0x00d3d3d3,0x00f2f2f2,0x004f4f4f,0x00191919,
-	0x003f3f3f,0x00dcdcdc,0x00797979,0x001d1d1d,
-	0x00525252,0x00ebebeb,0x00f3f3f3,0x006d6d6d,
-	0x005e5e5e,0x00fbfbfb,0x00696969,0x00b2b2b2,
-	0x00f0f0f0,0x00313131,0x000c0c0c,0x00d4d4d4,
-	0x00cfcfcf,0x008c8c8c,0x00e2e2e2,0x00757575,
-	0x00a9a9a9,0x004a4a4a,0x00575757,0x00848484,
-	0x00111111,0x00454545,0x001b1b1b,0x00f5f5f5,
-	0x00e4e4e4,0x000e0e0e,0x00737373,0x00aaaaaa,
-	0x00f1f1f1,0x00dddddd,0x00595959,0x00141414,
-	0x006c6c6c,0x00929292,0x00545454,0x00d0d0d0,
-	0x00787878,0x00707070,0x00e3e3e3,0x00494949,
-	0x00808080,0x00505050,0x00a7a7a7,0x00f6f6f6,
-	0x00777777,0x00939393,0x00868686,0x00838383,
-	0x002a2a2a,0x00c7c7c7,0x005b5b5b,0x00e9e9e9,
-	0x00eeeeee,0x008f8f8f,0x00010101,0x003d3d3d,
-	};
-
-static const u32 camellia_sp3033[256] =
-	{
-	0x38003838,0x41004141,0x16001616,0x76007676,
-	0xd900d9d9,0x93009393,0x60006060,0xf200f2f2,
-	0x72007272,0xc200c2c2,0xab00abab,0x9a009a9a,
-	0x75007575,0x06000606,0x57005757,0xa000a0a0,
-	0x91009191,0xf700f7f7,0xb500b5b5,0xc900c9c9,
-	0xa200a2a2,0x8c008c8c,0xd200d2d2,0x90009090,
-	0xf600f6f6,0x07000707,0xa700a7a7,0x27002727,
-	0x8e008e8e,0xb200b2b2,0x49004949,0xde00dede,
-	0x43004343,0x5c005c5c,0xd700d7d7,0xc700c7c7,
-	0x3e003e3e,0xf500f5f5,0x8f008f8f,0x67006767,
-	0x1f001f1f,0x18001818,0x6e006e6e,0xaf00afaf,
-	0x2f002f2f,0xe200e2e2,0x85008585,0x0d000d0d,
-	0x53005353,0xf000f0f0,0x9c009c9c,0x65006565,
-	0xea00eaea,0xa300a3a3,0xae00aeae,0x9e009e9e,
-	0xec00ecec,0x80008080,0x2d002d2d,0x6b006b6b,
-	0xa800a8a8,0x2b002b2b,0x36003636,0xa600a6a6,
-	0xc500c5c5,0x86008686,0x4d004d4d,0x33003333,
-	0xfd00fdfd,0x66006666,0x58005858,0x96009696,
-	0x3a003a3a,0x09000909,0x95009595,0x10001010,
-	0x78007878,0xd800d8d8,0x42004242,0xcc00cccc,
-	0xef00efef,0x26002626,0xe500e5e5,0x61006161,
-	0x1a001a1a,0x3f003f3f,0x3b003b3b,0x82008282,
-	0xb600b6b6,0xdb00dbdb,0xd400d4d4,0x98009898,
-	0xe800e8e8,0x8b008b8b,0x02000202,0xeb00ebeb,
-	0x0a000a0a,0x2c002c2c,0x1d001d1d,0xb000b0b0,
-	0x6f006f6f,0x8d008d8d,0x88008888,0x0e000e0e,
-	0x19001919,0x87008787,0x4e004e4e,0x0b000b0b,
-	0xa900a9a9,0x0c000c0c,0x79007979,0x11001111,
-	0x7f007f7f,0x22002222,0xe700e7e7,0x59005959,
-	0xe100e1e1,0xda00dada,0x3d003d3d,0xc800c8c8,
-	0x12001212,0x04000404,0x74007474,0x54005454,
-	0x30003030,0x7e007e7e,0xb400b4b4,0x28002828,
-	0x55005555,0x68006868,0x50005050,0xbe00bebe,
-	0xd000d0d0,0xc400c4c4,0x31003131,0xcb00cbcb,
-	0x2a002a2a,0xad00adad,0x0f000f0f,0xca00caca,
-	0x70007070,0xff00ffff,0x32003232,0x69006969,
-	0x08000808,0x62006262,0x00000000,0x24002424,
-	0xd100d1d1,0xfb00fbfb,0xba00baba,0xed00eded,
-	0x45004545,0x81008181,0x73007373,0x6d006d6d,
-	0x84008484,0x9f009f9f,0xee00eeee,0x4a004a4a,
-	0xc300c3c3,0x2e002e2e,0xc100c1c1,0x01000101,
-	0xe600e6e6,0x25002525,0x48004848,0x99009999,
-	0xb900b9b9,0xb300b3b3,0x7b007b7b,0xf900f9f9,
-	0xce00cece,0xbf00bfbf,0xdf00dfdf,0x71007171,
-	0x29002929,0xcd00cdcd,0x6c006c6c,0x13001313,
-	0x64006464,0x9b009b9b,0x63006363,0x9d009d9d,
-	0xc000c0c0,0x4b004b4b,0xb700b7b7,0xa500a5a5,
-	0x89008989,0x5f005f5f,0xb100b1b1,0x17001717,
-	0xf400f4f4,0xbc00bcbc,0xd300d3d3,0x46004646,
-	0xcf00cfcf,0x37003737,0x5e005e5e,0x47004747,
-	0x94009494,0xfa00fafa,0xfc00fcfc,0x5b005b5b,
-	0x97009797,0xfe00fefe,0x5a005a5a,0xac00acac,
-	0x3c003c3c,0x4c004c4c,0x03000303,0x35003535,
-	0xf300f3f3,0x23002323,0xb800b8b8,0x5d005d5d,
-	0x6a006a6a,0x92009292,0xd500d5d5,0x21002121,
-	0x44004444,0x51005151,0xc600c6c6,0x7d007d7d,
-	0x39003939,0x83008383,0xdc00dcdc,0xaa00aaaa,
-	0x7c007c7c,0x77007777,0x56005656,0x05000505,
-	0x1b001b1b,0xa400a4a4,0x15001515,0x34003434,
-	0x1e001e1e,0x1c001c1c,0xf800f8f8,0x52005252,
-	0x20002020,0x14001414,0xe900e9e9,0xbd00bdbd,
-	0xdd00dddd,0xe400e4e4,0xa100a1a1,0xe000e0e0,
-	0x8a008a8a,0xf100f1f1,0xd600d6d6,0x7a007a7a,
-	0xbb00bbbb,0xe300e3e3,0x40004040,0x4f004f4f,
-	};
-
-static const u32 camellia_sp4404[256] =
-	{
-	0x70700070,0x2c2c002c,0xb3b300b3,0xc0c000c0,
-	0xe4e400e4,0x57570057,0xeaea00ea,0xaeae00ae,
-	0x23230023,0x6b6b006b,0x45450045,0xa5a500a5,
-	0xeded00ed,0x4f4f004f,0x1d1d001d,0x92920092,
-	0x86860086,0xafaf00af,0x7c7c007c,0x1f1f001f,
-	0x3e3e003e,0xdcdc00dc,0x5e5e005e,0x0b0b000b,
-	0xa6a600a6,0x39390039,0xd5d500d5,0x5d5d005d,
-	0xd9d900d9,0x5a5a005a,0x51510051,0x6c6c006c,
-	0x8b8b008b,0x9a9a009a,0xfbfb00fb,0xb0b000b0,
-	0x74740074,0x2b2b002b,0xf0f000f0,0x84840084,
-	0xdfdf00df,0xcbcb00cb,0x34340034,0x76760076,
-	0x6d6d006d,0xa9a900a9,0xd1d100d1,0x04040004,
-	0x14140014,0x3a3a003a,0xdede00de,0x11110011,
-	0x32320032,0x9c9c009c,0x53530053,0xf2f200f2,
-	0xfefe00fe,0xcfcf00cf,0xc3c300c3,0x7a7a007a,
-	0x24240024,0xe8e800e8,0x60600060,0x69690069,
-	0xaaaa00aa,0xa0a000a0,0xa1a100a1,0x62620062,
-	0x54540054,0x1e1e001e,0xe0e000e0,0x64640064,
-	0x10100010,0x00000000,0xa3a300a3,0x75750075,
-	0x8a8a008a,0xe6e600e6,0x09090009,0xdddd00dd,
-	0x87870087,0x83830083,0xcdcd00cd,0x90900090,
-	0x73730073,0xf6f600f6,0x9d9d009d,0xbfbf00bf,
-	0x52520052,0xd8d800d8,0xc8c800c8,0xc6c600c6,
-	0x81810081,0x6f6f006f,0x13130013,0x63630063,
-	0xe9e900e9,0xa7a700a7,0x9f9f009f,0xbcbc00bc,
-	0x29290029,0xf9f900f9,0x2f2f002f,0xb4b400b4,
-	0x78780078,0x06060006,0xe7e700e7,0x71710071,
-	0xd4d400d4,0xabab00ab,0x88880088,0x8d8d008d,
-	0x72720072,0xb9b900b9,0xf8f800f8,0xacac00ac,
-	0x36360036,0x2a2a002a,0x3c3c003c,0xf1f100f1,
-	0x40400040,0xd3d300d3,0xbbbb00bb,0x43430043,
-	0x15150015,0xadad00ad,0x77770077,0x80800080,
-	0x82820082,0xecec00ec,0x27270027,0xe5e500e5,
-	0x85850085,0x35350035,0x0c0c000c,0x41410041,
-	0xefef00ef,0x93930093,0x19190019,0x21210021,
-	0x0e0e000e,0x4e4e004e,0x65650065,0xbdbd00bd,
-	0xb8b800b8,0x8f8f008f,0xebeb00eb,0xcece00ce,
-	0x30300030,0x5f5f005f,0xc5c500c5,0x1a1a001a,
-	0xe1e100e1,0xcaca00ca,0x47470047,0x3d3d003d,
-	0x01010001,0xd6d600d6,0x56560056,0x4d4d004d,
-	0x0d0d000d,0x66660066,0xcccc00cc,0x2d2d002d,
-	0x12120012,0x20200020,0xb1b100b1,0x99990099,
-	0x4c4c004c,0xc2c200c2,0x7e7e007e,0x05050005,
-	0xb7b700b7,0x31310031,0x17170017,0xd7d700d7,
-	0x58580058,0x61610061,0x1b1b001b,0x1c1c001c,
-	0x0f0f000f,0x16160016,0x18180018,0x22220022,
-	0x44440044,0xb2b200b2,0xb5b500b5,0x91910091,
-	0x08080008,0xa8a800a8,0xfcfc00fc,0x50500050,
-	0xd0d000d0,0x7d7d007d,0x89890089,0x97970097,
-	0x5b5b005b,0x95950095,0xffff00ff,0xd2d200d2,
-	0xc4c400c4,0x48480048,0xf7f700f7,0xdbdb00db,
-	0x03030003,0xdada00da,0x3f3f003f,0x94940094,
-	0x5c5c005c,0x02020002,0x4a4a004a,0x33330033,
-	0x67670067,0xf3f300f3,0x7f7f007f,0xe2e200e2,
-	0x9b9b009b,0x26260026,0x37370037,0x3b3b003b,
-	0x96960096,0x4b4b004b,0xbebe00be,0x2e2e002e,
-	0x79790079,0x8c8c008c,0x6e6e006e,0x8e8e008e,
-	0xf5f500f5,0xb6b600b6,0xfdfd00fd,0x59590059,
-	0x98980098,0x6a6a006a,0x46460046,0xbaba00ba,
-	0x25250025,0x42420042,0xa2a200a2,0xfafa00fa,
-	0x07070007,0x55550055,0xeeee00ee,0x0a0a000a,
-	0x49490049,0x68680068,0x38380038,0xa4a400a4,
-	0x28280028,0x7b7b007b,0xc9c900c9,0xc1c100c1,
-	0xe3e300e3,0xf4f400f4,0xc7c700c7,0x9e9e009e,
-	};
-
-/**
- * Stuff related to the Camellia key schedule
- */
-#define subl(x) subL[(x)]
-#define subr(x) subR[(x)]
-
-void camellia_setup128(const u8 *key, u32 *subkey)
-	{
-	u32 kll, klr, krl, krr;
-	u32 il, ir, t0, t1, w0, w1;
-	u32 kw4l, kw4r, dw, tl, tr;
-	u32 subL[26];
-	u32 subR[26];
-
-	/**
-	 *  k == kll || klr || krl || krr (|| is concatination)
-	 */
-	kll = GETU32(key     );
-	klr = GETU32(key +  4);
-	krl = GETU32(key +  8);
-	krr = GETU32(key + 12);
-	/**
-	 * generate KL dependent subkeys
-	 */
-	/* kw1 */
-	subl(0) = kll; subr(0) = klr;
-	/* kw2 */
-	subl(1) = krl; subr(1) = krr;
-	/* rotation left shift 15bit */
-	CAMELLIA_ROLDQ(kll, klr, krl, krr, w0, w1, 15);
-	/* k3 */
-	subl(4) = kll; subr(4) = klr;
-	/* k4 */
-	subl(5) = krl; subr(5) = krr;
-	/* rotation left shift 15+30bit */
-	CAMELLIA_ROLDQ(kll, klr, krl, krr, w0, w1, 30);
-	/* k7 */
-	subl(10) = kll; subr(10) = klr;
-	/* k8 */
-	subl(11) = krl; subr(11) = krr;
-	/* rotation left shift 15+30+15bit */
-	CAMELLIA_ROLDQ(kll, klr, krl, krr, w0, w1, 15);
-	/* k10 */
-	subl(13) = krl; subr(13) = krr;
-	/* rotation left shift 15+30+15+17 bit */
-	CAMELLIA_ROLDQ(kll, klr, krl, krr, w0, w1, 17);
-	/* kl3 */
-	subl(16) = kll; subr(16) = klr;
-	/* kl4 */
-	subl(17) = krl; subr(17) = krr;
-	/* rotation left shift 15+30+15+17+17 bit */
-	CAMELLIA_ROLDQ(kll, klr, krl, krr, w0, w1, 17);
-	/* k13 */
-	subl(18) = kll; subr(18) = klr;
-	/* k14 */
-	subl(19) = krl; subr(19) = krr;
-	/* rotation left shift 15+30+15+17+17+17 bit */
-	CAMELLIA_ROLDQ(kll, klr, krl, krr, w0, w1, 17);
-	/* k17 */
-	subl(22) = kll; subr(22) = klr;
-	/* k18 */
-	subl(23) = krl; subr(23) = krr;
-
-	/* generate KA */
-	kll = subl(0); klr = subr(0);
-	krl = subl(1); krr = subr(1);
-	CAMELLIA_F(kll, klr,
-		CAMELLIA_SIGMA1L, CAMELLIA_SIGMA1R,
-		w0, w1, il, ir, t0, t1);
-	krl ^= w0; krr ^= w1;
-	CAMELLIA_F(krl, krr,
-		CAMELLIA_SIGMA2L, CAMELLIA_SIGMA2R,
-		kll, klr, il, ir, t0, t1);
-	/* current status == (kll, klr, w0, w1) */
-	CAMELLIA_F(kll, klr,
-		CAMELLIA_SIGMA3L, CAMELLIA_SIGMA3R,
-		krl, krr, il, ir, t0, t1);
-	krl ^= w0; krr ^= w1;
-	CAMELLIA_F(krl, krr,
-		CAMELLIA_SIGMA4L, CAMELLIA_SIGMA4R,
-		w0, w1, il, ir, t0, t1);
-	kll ^= w0; klr ^= w1;
-
-	/* generate KA dependent subkeys */
-	/* k1, k2 */
-	subl(2) = kll; subr(2) = klr;
-	subl(3) = krl; subr(3) = krr;
-	CAMELLIA_ROLDQ(kll, klr, krl, krr, w0, w1, 15);
-	/* k5,k6 */
-	subl(6) = kll; subr(6) = klr;
-	subl(7) = krl; subr(7) = krr;
-	CAMELLIA_ROLDQ(kll, klr, krl, krr, w0, w1, 15);
-	/* kl1, kl2 */
-	subl(8) = kll; subr(8) = klr;
-	subl(9) = krl; subr(9) = krr;
-	CAMELLIA_ROLDQ(kll, klr, krl, krr, w0, w1, 15);
-	/* k9 */
-	subl(12) = kll; subr(12) = klr;
-	CAMELLIA_ROLDQ(kll, klr, krl, krr, w0, w1, 15);
-	/* k11, k12 */
-	subl(14) = kll; subr(14) = klr;
-	subl(15) = krl; subr(15) = krr;
-	CAMELLIA_ROLDQo32(kll, klr, krl, krr, w0, w1, 34);
-	/* k15, k16 */
-	subl(20) = kll; subr(20) = klr;
-	subl(21) = krl; subr(21) = krr;
-	CAMELLIA_ROLDQ(kll, klr, krl, krr, w0, w1, 17);
-	/* kw3, kw4 */
-	subl(24) = kll; subr(24) = klr;
-	subl(25) = krl; subr(25) = krr;
-
-
-	/* absorb kw2 to other subkeys */
-/* round 2 */
-	subl(3) ^= subl(1); subr(3) ^= subr(1);
-/* round 4 */
-	subl(5) ^= subl(1); subr(5) ^= subr(1);
-/* round 6 */
-	subl(7) ^= subl(1); subr(7) ^= subr(1);
-	subl(1) ^= subr(1) & ~subr(9);
-	dw = subl(1) & subl(9),
-		subr(1) ^= CAMELLIA_RL1(dw); /* modified for FLinv(kl2) */
-/* round 8 */
-	subl(11) ^= subl(1); subr(11) ^= subr(1);
-/* round 10 */
-	subl(13) ^= subl(1); subr(13) ^= subr(1);
-/* round 12 */
-	subl(15) ^= subl(1); subr(15) ^= subr(1);
-	subl(1) ^= subr(1) & ~subr(17);
-	dw = subl(1) & subl(17),
-		subr(1) ^= CAMELLIA_RL1(dw); /* modified for FLinv(kl4) */
-/* round 14 */
-	subl(19) ^= subl(1); subr(19) ^= subr(1);
-/* round 16 */
-	subl(21) ^= subl(1); subr(21) ^= subr(1);
-/* round 18 */
-	subl(23) ^= subl(1); subr(23) ^= subr(1);
-/* kw3 */
-	subl(24) ^= subl(1); subr(24) ^= subr(1);
-
-	/* absorb kw4 to other subkeys */
-	kw4l = subl(25); kw4r = subr(25);
-/* round 17 */
-	subl(22) ^= kw4l; subr(22) ^= kw4r;
-/* round 15 */
-	subl(20) ^= kw4l; subr(20) ^= kw4r;
-/* round 13 */
-	subl(18) ^= kw4l; subr(18) ^= kw4r;
-	kw4l ^= kw4r & ~subr(16);
-	dw = kw4l & subl(16),
-		kw4r ^= CAMELLIA_RL1(dw); /* modified for FL(kl3) */
-/* round 11 */
-	subl(14) ^= kw4l; subr(14) ^= kw4r;
-/* round 9 */
-	subl(12) ^= kw4l; subr(12) ^= kw4r;
-/* round 7 */
-	subl(10) ^= kw4l; subr(10) ^= kw4r;
-	kw4l ^= kw4r & ~subr(8);
-	dw = kw4l & subl(8),
-		kw4r ^= CAMELLIA_RL1(dw); /* modified for FL(kl1) */
-/* round 5 */
-	subl(6) ^= kw4l; subr(6) ^= kw4r;
-/* round 3 */
-	subl(4) ^= kw4l; subr(4) ^= kw4r;
-/* round 1 */
-	subl(2) ^= kw4l; subr(2) ^= kw4r;
-/* kw1 */
-	subl(0) ^= kw4l; subr(0) ^= kw4r;
-
-
-	/* key XOR is end of F-function */
-	CamelliaSubkeyL(0) = subl(0) ^ subl(2);/* kw1 */
-	CamelliaSubkeyR(0) = subr(0) ^ subr(2);
-	CamelliaSubkeyL(2) = subl(3);       /* round 1 */
-	CamelliaSubkeyR(2) = subr(3);
-	CamelliaSubkeyL(3) = subl(2) ^ subl(4); /* round 2 */
-	CamelliaSubkeyR(3) = subr(2) ^ subr(4);
-	CamelliaSubkeyL(4) = subl(3) ^ subl(5); /* round 3 */
-	CamelliaSubkeyR(4) = subr(3) ^ subr(5);
-	CamelliaSubkeyL(5) = subl(4) ^ subl(6); /* round 4 */
-	CamelliaSubkeyR(5) = subr(4) ^ subr(6);
-	CamelliaSubkeyL(6) = subl(5) ^ subl(7); /* round 5 */
-	CamelliaSubkeyR(6) = subr(5) ^ subr(7);
-	tl = subl(10) ^ (subr(10) & ~subr(8));
-	dw = tl & subl(8),  /* FL(kl1) */
-		tr = subr(10) ^ CAMELLIA_RL1(dw);
-	CamelliaSubkeyL(7) = subl(6) ^ tl; /* round 6 */
-	CamelliaSubkeyR(7) = subr(6) ^ tr;
-	CamelliaSubkeyL(8) = subl(8);       /* FL(kl1) */
-	CamelliaSubkeyR(8) = subr(8);
-	CamelliaSubkeyL(9) = subl(9);       /* FLinv(kl2) */
-	CamelliaSubkeyR(9) = subr(9);
-	tl = subl(7) ^ (subr(7) & ~subr(9));
-	dw = tl & subl(9),  /* FLinv(kl2) */
-		tr = subr(7) ^ CAMELLIA_RL1(dw);
-	CamelliaSubkeyL(10) = tl ^ subl(11); /* round 7 */
-	CamelliaSubkeyR(10) = tr ^ subr(11);
-	CamelliaSubkeyL(11) = subl(10) ^ subl(12); /* round 8 */
-	CamelliaSubkeyR(11) = subr(10) ^ subr(12);
-	CamelliaSubkeyL(12) = subl(11) ^ subl(13); /* round 9 */
-	CamelliaSubkeyR(12) = subr(11) ^ subr(13);
-	CamelliaSubkeyL(13) = subl(12) ^ subl(14); /* round 10 */
-	CamelliaSubkeyR(13) = subr(12) ^ subr(14);
-	CamelliaSubkeyL(14) = subl(13) ^ subl(15); /* round 11 */
-	CamelliaSubkeyR(14) = subr(13) ^ subr(15);
-	tl = subl(18) ^ (subr(18) & ~subr(16));
-	dw = tl & subl(16), /* FL(kl3) */
-		tr = subr(18) ^ CAMELLIA_RL1(dw);
-	CamelliaSubkeyL(15) = subl(14) ^ tl; /* round 12 */
-	CamelliaSubkeyR(15) = subr(14) ^ tr;
-	CamelliaSubkeyL(16) = subl(16);     /* FL(kl3) */
-	CamelliaSubkeyR(16) = subr(16);
-	CamelliaSubkeyL(17) = subl(17);     /* FLinv(kl4) */
-	CamelliaSubkeyR(17) = subr(17);
-	tl = subl(15) ^ (subr(15) & ~subr(17));
-	dw = tl & subl(17), /* FLinv(kl4) */
-		tr = subr(15) ^ CAMELLIA_RL1(dw);
-	CamelliaSubkeyL(18) = tl ^ subl(19); /* round 13 */
-	CamelliaSubkeyR(18) = tr ^ subr(19);
-	CamelliaSubkeyL(19) = subl(18) ^ subl(20); /* round 14 */
-	CamelliaSubkeyR(19) = subr(18) ^ subr(20);
-	CamelliaSubkeyL(20) = subl(19) ^ subl(21); /* round 15 */
-	CamelliaSubkeyR(20) = subr(19) ^ subr(21);
-	CamelliaSubkeyL(21) = subl(20) ^ subl(22); /* round 16 */
-	CamelliaSubkeyR(21) = subr(20) ^ subr(22);
-	CamelliaSubkeyL(22) = subl(21) ^ subl(23); /* round 17 */
-	CamelliaSubkeyR(22) = subr(21) ^ subr(23);
-	CamelliaSubkeyL(23) = subl(22);     /* round 18 */
-	CamelliaSubkeyR(23) = subr(22);
-	CamelliaSubkeyL(24) = subl(24) ^ subl(23); /* kw3 */
-	CamelliaSubkeyR(24) = subr(24) ^ subr(23);
-
-	/* apply the inverse of the last half of P-function */
-	dw = CamelliaSubkeyL(2) ^ CamelliaSubkeyR(2),
-		dw = CAMELLIA_RL8(dw);/* round 1 */
-	CamelliaSubkeyR(2) = CamelliaSubkeyL(2) ^ dw,
-		CamelliaSubkeyL(2) = dw;
-	dw = CamelliaSubkeyL(3) ^ CamelliaSubkeyR(3),
-		dw = CAMELLIA_RL8(dw);/* round 2 */
-	CamelliaSubkeyR(3) = CamelliaSubkeyL(3) ^ dw,
-		CamelliaSubkeyL(3) = dw;
-	dw = CamelliaSubkeyL(4) ^ CamelliaSubkeyR(4),
-		dw = CAMELLIA_RL8(dw);/* round 3 */
-	CamelliaSubkeyR(4) = CamelliaSubkeyL(4) ^ dw,
-		CamelliaSubkeyL(4) = dw;
-	dw = CamelliaSubkeyL(5) ^ CamelliaSubkeyR(5),
-		dw = CAMELLIA_RL8(dw);/* round 4 */
-	CamelliaSubkeyR(5) = CamelliaSubkeyL(5) ^ dw,
-		CamelliaSubkeyL(5) = dw;
-	dw = CamelliaSubkeyL(6) ^ CamelliaSubkeyR(6),
-		dw = CAMELLIA_RL8(dw);/* round 5 */
-	CamelliaSubkeyR(6) = CamelliaSubkeyL(6) ^ dw,
-		CamelliaSubkeyL(6) = dw;
-	dw = CamelliaSubkeyL(7) ^ CamelliaSubkeyR(7),
-		dw = CAMELLIA_RL8(dw);/* round 6 */
-	CamelliaSubkeyR(7) = CamelliaSubkeyL(7) ^ dw,
-		CamelliaSubkeyL(7) = dw;
-	dw = CamelliaSubkeyL(10) ^ CamelliaSubkeyR(10),
-		dw = CAMELLIA_RL8(dw);/* round 7 */
-	CamelliaSubkeyR(10) = CamelliaSubkeyL(10) ^ dw,
-		CamelliaSubkeyL(10) = dw;
-	dw = CamelliaSubkeyL(11) ^ CamelliaSubkeyR(11),
-		dw = CAMELLIA_RL8(dw);/* round 8 */
-	CamelliaSubkeyR(11) = CamelliaSubkeyL(11) ^ dw,
-		CamelliaSubkeyL(11) = dw;
-	dw = CamelliaSubkeyL(12) ^ CamelliaSubkeyR(12),
-		dw = CAMELLIA_RL8(dw);/* round 9 */
-	CamelliaSubkeyR(12) = CamelliaSubkeyL(12) ^ dw,
-		CamelliaSubkeyL(12) = dw;
-	dw = CamelliaSubkeyL(13) ^ CamelliaSubkeyR(13),
-		dw = CAMELLIA_RL8(dw);/* round 10 */
-	CamelliaSubkeyR(13) = CamelliaSubkeyL(13) ^ dw,
-		CamelliaSubkeyL(13) = dw;
-	dw = CamelliaSubkeyL(14) ^ CamelliaSubkeyR(14),
-		dw = CAMELLIA_RL8(dw);/* round 11 */
-	CamelliaSubkeyR(14) = CamelliaSubkeyL(14) ^ dw,
-		CamelliaSubkeyL(14) = dw;
-	dw = CamelliaSubkeyL(15) ^ CamelliaSubkeyR(15),
-		dw = CAMELLIA_RL8(dw);/* round 12 */
-	CamelliaSubkeyR(15) = CamelliaSubkeyL(15) ^ dw,
-		CamelliaSubkeyL(15) = dw;
-	dw = CamelliaSubkeyL(18) ^ CamelliaSubkeyR(18),
-		dw = CAMELLIA_RL8(dw);/* round 13 */
-	CamelliaSubkeyR(18) = CamelliaSubkeyL(18) ^ dw,
-		CamelliaSubkeyL(18) = dw;
-	dw = CamelliaSubkeyL(19) ^ CamelliaSubkeyR(19),
-		dw = CAMELLIA_RL8(dw);/* round 14 */
-	CamelliaSubkeyR(19) = CamelliaSubkeyL(19) ^ dw,
-		CamelliaSubkeyL(19) = dw;
-	dw = CamelliaSubkeyL(20) ^ CamelliaSubkeyR(20),
-		dw = CAMELLIA_RL8(dw);/* round 15 */
-	CamelliaSubkeyR(20) = CamelliaSubkeyL(20) ^ dw,
-		CamelliaSubkeyL(20) = dw;
-	dw = CamelliaSubkeyL(21) ^ CamelliaSubkeyR(21),
-		dw = CAMELLIA_RL8(dw);/* round 16 */
-	CamelliaSubkeyR(21) = CamelliaSubkeyL(21) ^ dw,
-		CamelliaSubkeyL(21) = dw;
-	dw = CamelliaSubkeyL(22) ^ CamelliaSubkeyR(22),
-		dw = CAMELLIA_RL8(dw);/* round 17 */
-	CamelliaSubkeyR(22) = CamelliaSubkeyL(22) ^ dw,
-		CamelliaSubkeyL(22) = dw;
-	dw = CamelliaSubkeyL(23) ^ CamelliaSubkeyR(23),
-		dw = CAMELLIA_RL8(dw);/* round 18 */
-	CamelliaSubkeyR(23) = CamelliaSubkeyL(23) ^ dw,
-		CamelliaSubkeyL(23) = dw;
-
-	return;
-	}
-
-void camellia_setup256(const u8 *key, u32 *subkey)
-	{
-	u32 kll,klr,krl,krr;           /* left half of key */
-	u32 krll,krlr,krrl,krrr;       /* right half of key */
-	u32 il, ir, t0, t1, w0, w1;    /* temporary variables */
-	u32 kw4l, kw4r, dw, tl, tr;
-	u32 subL[34];
-	u32 subR[34];
-
-	/**
-	 *  key = (kll || klr || krl || krr || krll || krlr || krrl || krrr)
-	 *  (|| is concatination)
-	 */
-
-	kll  = GETU32(key     );
-	klr  = GETU32(key +  4);
-	krl  = GETU32(key +  8);
-	krr  = GETU32(key + 12);
-	krll = GETU32(key + 16);
-	krlr = GETU32(key + 20);
-	krrl = GETU32(key + 24);
-	krrr = GETU32(key + 28);
-
-	/* generate KL dependent subkeys */
-	/* kw1 */
-	subl(0) = kll; subr(0) = klr;
-	/* kw2 */
-	subl(1) = krl; subr(1) = krr;
-	CAMELLIA_ROLDQo32(kll, klr, krl, krr, w0, w1, 45);
-	/* k9 */
-	subl(12) = kll; subr(12) = klr;
-	/* k10 */
-	subl(13) = krl; subr(13) = krr;
-	CAMELLIA_ROLDQ(kll, klr, krl, krr, w0, w1, 15);
-	/* kl3 */
-	subl(16) = kll; subr(16) = klr;
-	/* kl4 */
-	subl(17) = krl; subr(17) = krr;
-	CAMELLIA_ROLDQ(kll, klr, krl, krr, w0, w1, 17);
-	/* k17 */
-	subl(22) = kll; subr(22) = klr;
-	/* k18 */
-	subl(23) = krl; subr(23) = krr;
-	CAMELLIA_ROLDQo32(kll, klr, krl, krr, w0, w1, 34);
-	/* k23 */
-	subl(30) = kll; subr(30) = klr;
-	/* k24 */
-	subl(31) = krl; subr(31) = krr;
-
-	/* generate KR dependent subkeys */
-	CAMELLIA_ROLDQ(krll, krlr, krrl, krrr, w0, w1, 15);
-	/* k3 */
-	subl(4) = krll; subr(4) = krlr;
-	/* k4 */
-	subl(5) = krrl; subr(5) = krrr;
-	CAMELLIA_ROLDQ(krll, krlr, krrl, krrr, w0, w1, 15);
-	/* kl1 */
-	subl(8) = krll; subr(8) = krlr;
-	/* kl2 */
-	subl(9) = krrl; subr(9) = krrr;
-	CAMELLIA_ROLDQ(krll, krlr, krrl, krrr, w0, w1, 30);
-	/* k13 */
-	subl(18) = krll; subr(18) = krlr;
-	/* k14 */
-	subl(19) = krrl; subr(19) = krrr;
-	CAMELLIA_ROLDQo32(krll, krlr, krrl, krrr, w0, w1, 34);
-	/* k19 */
-	subl(26) = krll; subr(26) = krlr;
-	/* k20 */
-	subl(27) = krrl; subr(27) = krrr;
-	CAMELLIA_ROLDQo32(krll, krlr, krrl, krrr, w0, w1, 34);
-
-	/* generate KA */
-	kll = subl(0) ^ krll; klr = subr(0) ^ krlr;
-	krl = subl(1) ^ krrl; krr = subr(1) ^ krrr;
-	CAMELLIA_F(kll, klr,
-		CAMELLIA_SIGMA1L, CAMELLIA_SIGMA1R,
-		w0, w1, il, ir, t0, t1);
-	krl ^= w0; krr ^= w1;
-	CAMELLIA_F(krl, krr,
-		CAMELLIA_SIGMA2L, CAMELLIA_SIGMA2R,
-		kll, klr, il, ir, t0, t1);
-	kll ^= krll; klr ^= krlr;
-	CAMELLIA_F(kll, klr,
-		CAMELLIA_SIGMA3L, CAMELLIA_SIGMA3R,
-		krl, krr, il, ir, t0, t1);
-	krl ^= w0 ^ krrl; krr ^= w1 ^ krrr;
-	CAMELLIA_F(krl, krr,
-		CAMELLIA_SIGMA4L, CAMELLIA_SIGMA4R,
-		w0, w1, il, ir, t0, t1);
-	kll ^= w0; klr ^= w1;
-
-	/* generate KB */
-	krll ^= kll; krlr ^= klr;
-	krrl ^= krl; krrr ^= krr;
-	CAMELLIA_F(krll, krlr,
-		CAMELLIA_SIGMA5L, CAMELLIA_SIGMA5R,
-		w0, w1, il, ir, t0, t1);
-	krrl ^= w0; krrr ^= w1;
-	CAMELLIA_F(krrl, krrr,
-		CAMELLIA_SIGMA6L, CAMELLIA_SIGMA6R,
-		w0, w1, il, ir, t0, t1);
-	krll ^= w0; krlr ^= w1;
-
-	/* generate KA dependent subkeys */
-	CAMELLIA_ROLDQ(kll, klr, krl, krr, w0, w1, 15);
-	/* k5 */
-	subl(6) = kll; subr(6) = klr;
-	/* k6 */
-	subl(7) = krl; subr(7) = krr;
-	CAMELLIA_ROLDQ(kll, klr, krl, krr, w0, w1, 30);
-	/* k11 */
-	subl(14) = kll; subr(14) = klr;
-	/* k12 */
-	subl(15) = krl; subr(15) = krr;
-	/* rotation left shift 32bit */
-	/* kl5 */
-	subl(24) = klr; subr(24) = krl;
-	/* kl6 */
-	subl(25) = krr; subr(25) = kll;
-	/* rotation left shift 49 from k11,k12 -> k21,k22 */
-	CAMELLIA_ROLDQo32(kll, klr, krl, krr, w0, w1, 49);
-	/* k21 */
-	subl(28) = kll; subr(28) = klr;
-	/* k22 */
-	subl(29) = krl; subr(29) = krr;
-
-	/* generate KB dependent subkeys */
-	/* k1 */
-	subl(2) = krll; subr(2) = krlr;
-	/* k2 */
-	subl(3) = krrl; subr(3) = krrr;
-	CAMELLIA_ROLDQ(krll, krlr, krrl, krrr, w0, w1, 30);
-	/* k7 */
-	subl(10) = krll; subr(10) = krlr;
-	/* k8 */
-	subl(11) = krrl; subr(11) = krrr;
-	CAMELLIA_ROLDQ(krll, krlr, krrl, krrr, w0, w1, 30);
-	/* k15 */
-	subl(20) = krll; subr(20) = krlr;
-	/* k16 */
-	subl(21) = krrl; subr(21) = krrr;
-	CAMELLIA_ROLDQo32(krll, krlr, krrl, krrr, w0, w1, 51);
-	/* kw3 */
-	subl(32) = krll; subr(32) = krlr;
-	/* kw4 */
-	subl(33) = krrl; subr(33) = krrr;
-
-	/* absorb kw2 to other subkeys */
-/* round 2 */
-	subl(3) ^= subl(1); subr(3) ^= subr(1);
-/* round 4 */
-	subl(5) ^= subl(1); subr(5) ^= subr(1);
-/* round 6 */
-	subl(7) ^= subl(1); subr(7) ^= subr(1);
-	subl(1) ^= subr(1) & ~subr(9);
-	dw = subl(1) & subl(9),
-		subr(1) ^= CAMELLIA_RL1(dw); /* modified for FLinv(kl2) */
-/* round 8 */
-	subl(11) ^= subl(1); subr(11) ^= subr(1);
-/* round 10 */
-	subl(13) ^= subl(1); subr(13) ^= subr(1);
-/* round 12 */
-	subl(15) ^= subl(1); subr(15) ^= subr(1);
-	subl(1) ^= subr(1) & ~subr(17);
-	dw = subl(1) & subl(17),
-		subr(1) ^= CAMELLIA_RL1(dw); /* modified for FLinv(kl4) */
-/* round 14 */
-	subl(19) ^= subl(1); subr(19) ^= subr(1);
-/* round 16 */
-	subl(21) ^= subl(1); subr(21) ^= subr(1);
-/* round 18 */
-	subl(23) ^= subl(1); subr(23) ^= subr(1);
-	subl(1) ^= subr(1) & ~subr(25);
-	dw = subl(1) & subl(25),
-		subr(1) ^= CAMELLIA_RL1(dw); /* modified for FLinv(kl6) */
-/* round 20 */
-	subl(27) ^= subl(1); subr(27) ^= subr(1);
-/* round 22 */
-	subl(29) ^= subl(1); subr(29) ^= subr(1);
-/* round 24 */
-	subl(31) ^= subl(1); subr(31) ^= subr(1);
-/* kw3 */
-	subl(32) ^= subl(1); subr(32) ^= subr(1);
-
-
-	/* absorb kw4 to other subkeys */
-	kw4l = subl(33); kw4r = subr(33);
-/* round 23 */
-	subl(30) ^= kw4l; subr(30) ^= kw4r;
-/* round 21 */
-	subl(28) ^= kw4l; subr(28) ^= kw4r;
-/* round 19 */
-	subl(26) ^= kw4l; subr(26) ^= kw4r;
-	kw4l ^= kw4r & ~subr(24);
-	dw = kw4l & subl(24),
-		kw4r ^= CAMELLIA_RL1(dw); /* modified for FL(kl5) */
-/* round 17 */
-	subl(22) ^= kw4l; subr(22) ^= kw4r;
-/* round 15 */
-	subl(20) ^= kw4l; subr(20) ^= kw4r;
-/* round 13 */
-	subl(18) ^= kw4l; subr(18) ^= kw4r;
-	kw4l ^= kw4r & ~subr(16);
-	dw = kw4l & subl(16),
-		kw4r ^= CAMELLIA_RL1(dw); /* modified for FL(kl3) */
-/* round 11 */
-	subl(14) ^= kw4l; subr(14) ^= kw4r;
-/* round 9 */
-	subl(12) ^= kw4l; subr(12) ^= kw4r;
-/* round 7 */
-	subl(10) ^= kw4l; subr(10) ^= kw4r;
-	kw4l ^= kw4r & ~subr(8);
-	dw = kw4l & subl(8),
-		kw4r ^= CAMELLIA_RL1(dw); /* modified for FL(kl1) */
-/* round 5 */
-	subl(6) ^= kw4l; subr(6) ^= kw4r;
-/* round 3 */
-	subl(4) ^= kw4l; subr(4) ^= kw4r;
-/* round 1 */
-	subl(2) ^= kw4l; subr(2) ^= kw4r;
-/* kw1 */
-	subl(0) ^= kw4l; subr(0) ^= kw4r;
-
-	/* key XOR is end of F-function */
-	CamelliaSubkeyL(0) = subl(0) ^ subl(2);/* kw1 */
-	CamelliaSubkeyR(0) = subr(0) ^ subr(2);
-	CamelliaSubkeyL(2) = subl(3);       /* round 1 */
-	CamelliaSubkeyR(2) = subr(3);
-	CamelliaSubkeyL(3) = subl(2) ^ subl(4); /* round 2 */
-	CamelliaSubkeyR(3) = subr(2) ^ subr(4);
-	CamelliaSubkeyL(4) = subl(3) ^ subl(5); /* round 3 */
-	CamelliaSubkeyR(4) = subr(3) ^ subr(5);
-	CamelliaSubkeyL(5) = subl(4) ^ subl(6); /* round 4 */
-	CamelliaSubkeyR(5) = subr(4) ^ subr(6);
-	CamelliaSubkeyL(6) = subl(5) ^ subl(7); /* round 5 */
-	CamelliaSubkeyR(6) = subr(5) ^ subr(7);
-	tl = subl(10) ^ (subr(10) & ~subr(8));
-	dw = tl & subl(8),  /* FL(kl1) */
-		tr = subr(10) ^ CAMELLIA_RL1(dw);
-	CamelliaSubkeyL(7) = subl(6) ^ tl; /* round 6 */
-	CamelliaSubkeyR(7) = subr(6) ^ tr;
-	CamelliaSubkeyL(8) = subl(8);       /* FL(kl1) */
-	CamelliaSubkeyR(8) = subr(8);
-	CamelliaSubkeyL(9) = subl(9);       /* FLinv(kl2) */
-	CamelliaSubkeyR(9) = subr(9);
-	tl = subl(7) ^ (subr(7) & ~subr(9));
-	dw = tl & subl(9),  /* FLinv(kl2) */
-		tr = subr(7) ^ CAMELLIA_RL1(dw);
-	CamelliaSubkeyL(10) = tl ^ subl(11); /* round 7 */
-	CamelliaSubkeyR(10) = tr ^ subr(11);
-	CamelliaSubkeyL(11) = subl(10) ^ subl(12); /* round 8 */
-	CamelliaSubkeyR(11) = subr(10) ^ subr(12);
-	CamelliaSubkeyL(12) = subl(11) ^ subl(13); /* round 9 */
-	CamelliaSubkeyR(12) = subr(11) ^ subr(13);
-	CamelliaSubkeyL(13) = subl(12) ^ subl(14); /* round 10 */
-	CamelliaSubkeyR(13) = subr(12) ^ subr(14);
-	CamelliaSubkeyL(14) = subl(13) ^ subl(15); /* round 11 */
-	CamelliaSubkeyR(14) = subr(13) ^ subr(15);
-	tl = subl(18) ^ (subr(18) & ~subr(16));
-	dw = tl & subl(16), /* FL(kl3) */
-		tr = subr(18) ^ CAMELLIA_RL1(dw);
-	CamelliaSubkeyL(15) = subl(14) ^ tl; /* round 12 */
-	CamelliaSubkeyR(15) = subr(14) ^ tr;
-	CamelliaSubkeyL(16) = subl(16);     /* FL(kl3) */
-	CamelliaSubkeyR(16) = subr(16);
-	CamelliaSubkeyL(17) = subl(17);     /* FLinv(kl4) */
-	CamelliaSubkeyR(17) = subr(17);
-	tl = subl(15) ^ (subr(15) & ~subr(17));
-	dw = tl & subl(17), /* FLinv(kl4) */
-		tr = subr(15) ^ CAMELLIA_RL1(dw);
-	CamelliaSubkeyL(18) = tl ^ subl(19); /* round 13 */
-	CamelliaSubkeyR(18) = tr ^ subr(19);
-	CamelliaSubkeyL(19) = subl(18) ^ subl(20); /* round 14 */
-	CamelliaSubkeyR(19) = subr(18) ^ subr(20);
-	CamelliaSubkeyL(20) = subl(19) ^ subl(21); /* round 15 */
-	CamelliaSubkeyR(20) = subr(19) ^ subr(21);
-	CamelliaSubkeyL(21) = subl(20) ^ subl(22); /* round 16 */
-	CamelliaSubkeyR(21) = subr(20) ^ subr(22);
-	CamelliaSubkeyL(22) = subl(21) ^ subl(23); /* round 17 */
-	CamelliaSubkeyR(22) = subr(21) ^ subr(23);
-	tl = subl(26) ^ (subr(26)
-		& ~subr(24));
-	dw = tl & subl(24), /* FL(kl5) */
-		tr = subr(26) ^ CAMELLIA_RL1(dw);
-	CamelliaSubkeyL(23) = subl(22) ^ tl; /* round 18 */
-	CamelliaSubkeyR(23) = subr(22) ^ tr;
-	CamelliaSubkeyL(24) = subl(24);     /* FL(kl5) */
-	CamelliaSubkeyR(24) = subr(24);
-	CamelliaSubkeyL(25) = subl(25);     /* FLinv(kl6) */
-	CamelliaSubkeyR(25) = subr(25);
-	tl = subl(23) ^ (subr(23) &
-		~subr(25));
-	dw = tl & subl(25), /* FLinv(kl6) */
-		tr = subr(23) ^ CAMELLIA_RL1(dw);
-	CamelliaSubkeyL(26) = tl ^ subl(27); /* round 19 */
-	CamelliaSubkeyR(26) = tr ^ subr(27);
-	CamelliaSubkeyL(27) = subl(26) ^ subl(28); /* round 20 */
-	CamelliaSubkeyR(27) = subr(26) ^ subr(28);
-	CamelliaSubkeyL(28) = subl(27) ^ subl(29); /* round 21 */
-	CamelliaSubkeyR(28) = subr(27) ^ subr(29);
-	CamelliaSubkeyL(29) = subl(28) ^ subl(30); /* round 22 */
-	CamelliaSubkeyR(29) = subr(28) ^ subr(30);
-	CamelliaSubkeyL(30) = subl(29) ^ subl(31); /* round 23 */
-	CamelliaSubkeyR(30) = subr(29) ^ subr(31);
-	CamelliaSubkeyL(31) = subl(30);     /* round 24 */
-	CamelliaSubkeyR(31) = subr(30);
-	CamelliaSubkeyL(32) = subl(32) ^ subl(31); /* kw3 */
-	CamelliaSubkeyR(32) = subr(32) ^ subr(31);
-
-	/* apply the inverse of the last half of P-function */
-	dw = CamelliaSubkeyL(2) ^ CamelliaSubkeyR(2),
-		dw = CAMELLIA_RL8(dw);/* round 1 */
-	CamelliaSubkeyR(2) = CamelliaSubkeyL(2) ^ dw,
-		CamelliaSubkeyL(2) = dw;
-	dw = CamelliaSubkeyL(3) ^ CamelliaSubkeyR(3),
-		dw = CAMELLIA_RL8(dw);/* round 2 */
-	CamelliaSubkeyR(3) = CamelliaSubkeyL(3) ^ dw,
-		CamelliaSubkeyL(3) = dw;
-	dw = CamelliaSubkeyL(4) ^ CamelliaSubkeyR(4),
-		dw = CAMELLIA_RL8(dw);/* round 3 */
-	CamelliaSubkeyR(4) = CamelliaSubkeyL(4) ^ dw,
-		CamelliaSubkeyL(4) = dw;
-	dw = CamelliaSubkeyL(5) ^ CamelliaSubkeyR(5),
-		dw = CAMELLIA_RL8(dw);/* round 4 */
-	CamelliaSubkeyR(5) = CamelliaSubkeyL(5) ^ dw,
-		CamelliaSubkeyL(5) = dw;
-	dw = CamelliaSubkeyL(6) ^ CamelliaSubkeyR(6),
-		dw = CAMELLIA_RL8(dw);/* round 5 */
-	CamelliaSubkeyR(6) = CamelliaSubkeyL(6) ^ dw,
-		CamelliaSubkeyL(6) = dw;
-	dw = CamelliaSubkeyL(7) ^ CamelliaSubkeyR(7),
-		dw = CAMELLIA_RL8(dw);/* round 6 */
-	CamelliaSubkeyR(7) = CamelliaSubkeyL(7) ^ dw,
-		CamelliaSubkeyL(7) = dw;
-	dw = CamelliaSubkeyL(10) ^ CamelliaSubkeyR(10),
-		dw = CAMELLIA_RL8(dw);/* round 7 */
-	CamelliaSubkeyR(10) = CamelliaSubkeyL(10) ^ dw,
-		CamelliaSubkeyL(10) = dw;
-	dw = CamelliaSubkeyL(11) ^ CamelliaSubkeyR(11),
-		dw = CAMELLIA_RL8(dw);/* round 8 */
-	CamelliaSubkeyR(11) = CamelliaSubkeyL(11) ^ dw,
-		CamelliaSubkeyL(11) = dw;
-	dw = CamelliaSubkeyL(12) ^ CamelliaSubkeyR(12),
-		dw = CAMELLIA_RL8(dw);/* round 9 */
-	CamelliaSubkeyR(12) = CamelliaSubkeyL(12) ^ dw,
-		CamelliaSubkeyL(12) = dw;
-	dw = CamelliaSubkeyL(13) ^ CamelliaSubkeyR(13),
-		dw = CAMELLIA_RL8(dw);/* round 10 */
-	CamelliaSubkeyR(13) = CamelliaSubkeyL(13) ^ dw,
-		CamelliaSubkeyL(13) = dw;
-	dw = CamelliaSubkeyL(14) ^ CamelliaSubkeyR(14),
-		dw = CAMELLIA_RL8(dw);/* round 11 */
-	CamelliaSubkeyR(14) = CamelliaSubkeyL(14) ^ dw,
-		CamelliaSubkeyL(14) = dw;
-	dw = CamelliaSubkeyL(15) ^ CamelliaSubkeyR(15),
-		dw = CAMELLIA_RL8(dw);/* round 12 */
-	CamelliaSubkeyR(15) = CamelliaSubkeyL(15) ^ dw,
-		CamelliaSubkeyL(15) = dw;
-	dw = CamelliaSubkeyL(18) ^ CamelliaSubkeyR(18),
-		dw = CAMELLIA_RL8(dw);/* round 13 */
-	CamelliaSubkeyR(18) = CamelliaSubkeyL(18) ^ dw,
-		CamelliaSubkeyL(18) = dw;
-	dw = CamelliaSubkeyL(19) ^ CamelliaSubkeyR(19),
-		dw = CAMELLIA_RL8(dw);/* round 14 */
-	CamelliaSubkeyR(19) = CamelliaSubkeyL(19) ^ dw,
-		CamelliaSubkeyL(19) = dw;
-	dw = CamelliaSubkeyL(20) ^ CamelliaSubkeyR(20),
-		dw = CAMELLIA_RL8(dw);/* round 15 */
-	CamelliaSubkeyR(20) = CamelliaSubkeyL(20) ^ dw,
-		CamelliaSubkeyL(20) = dw;
-	dw = CamelliaSubkeyL(21) ^ CamelliaSubkeyR(21),
-		dw = CAMELLIA_RL8(dw);/* round 16 */
-	CamelliaSubkeyR(21) = CamelliaSubkeyL(21) ^ dw,
-		CamelliaSubkeyL(21) = dw;
-	dw = CamelliaSubkeyL(22) ^ CamelliaSubkeyR(22),
-		dw = CAMELLIA_RL8(dw);/* round 17 */
-	CamelliaSubkeyR(22) = CamelliaSubkeyL(22) ^ dw,
-		CamelliaSubkeyL(22) = dw;
-	dw = CamelliaSubkeyL(23) ^ CamelliaSubkeyR(23),
-		dw = CAMELLIA_RL8(dw);/* round 18 */
-	CamelliaSubkeyR(23) = CamelliaSubkeyL(23) ^ dw,
-		CamelliaSubkeyL(23) = dw;
-	dw = CamelliaSubkeyL(26) ^ CamelliaSubkeyR(26),
-		dw = CAMELLIA_RL8(dw);/* round 19 */
-	CamelliaSubkeyR(26) = CamelliaSubkeyL(26) ^ dw,
-		CamelliaSubkeyL(26) = dw;
-	dw = CamelliaSubkeyL(27) ^ CamelliaSubkeyR(27),
-		dw = CAMELLIA_RL8(dw);/* round 20 */
-	CamelliaSubkeyR(27) = CamelliaSubkeyL(27) ^ dw,
-		CamelliaSubkeyL(27) = dw;
-	dw = CamelliaSubkeyL(28) ^ CamelliaSubkeyR(28),
-		dw = CAMELLIA_RL8(dw);/* round 21 */
-	CamelliaSubkeyR(28) = CamelliaSubkeyL(28) ^ dw,
-		CamelliaSubkeyL(28) = dw;
-	dw = CamelliaSubkeyL(29) ^ CamelliaSubkeyR(29),
-		dw = CAMELLIA_RL8(dw);/* round 22 */
-	CamelliaSubkeyR(29) = CamelliaSubkeyL(29) ^ dw,
-		CamelliaSubkeyL(29) = dw;
-	dw = CamelliaSubkeyL(30) ^ CamelliaSubkeyR(30),
-		dw = CAMELLIA_RL8(dw);/* round 23 */
-	CamelliaSubkeyR(30) = CamelliaSubkeyL(30) ^ dw,
-		CamelliaSubkeyL(30) = dw;
-	dw = CamelliaSubkeyL(31) ^ CamelliaSubkeyR(31),
-		dw = CAMELLIA_RL8(dw);/* round 24 */
-	CamelliaSubkeyR(31) = CamelliaSubkeyL(31) ^ dw,
-		CamelliaSubkeyL(31) = dw;
-
-    
-	return;
-	}
-
-void camellia_setup192(const u8 *key, u32 *subkey)
-	{
-	u8 kk[32];
-	u32 krll, krlr, krrl,krrr;
-
-	memcpy(kk, key, 24);
-	memcpy((u8 *)&krll, key+16,4);
-	memcpy((u8 *)&krlr, key+20,4);
-	krrl = ~krll;
-	krrr = ~krlr;
-	memcpy(kk+24, (u8 *)&krrl, 4);
-	memcpy(kk+28, (u8 *)&krrr, 4);
-	camellia_setup256(kk, subkey);
-	return;
-	}
-
-
-/**
- * Stuff related to camellia encryption/decryption
- */
-void camellia_encrypt128(const u32 *subkey, u32 *io)
-	{
-	u32 il, ir, t0, t1;
-
-	/* pre whitening but absorb kw2*/
-	io[0] ^= CamelliaSubkeyL(0);
-	io[1] ^= CamelliaSubkeyR(0);
-	/* main iteration */
-
-	CAMELLIA_ROUNDSM(io[0],io[1],
-		CamelliaSubkeyL(2),CamelliaSubkeyR(2),
-		io[2],io[3],il,ir,t0,t1);
-	CAMELLIA_ROUNDSM(io[2],io[3],
-		CamelliaSubkeyL(3),CamelliaSubkeyR(3),
-		io[0],io[1],il,ir,t0,t1);
-	CAMELLIA_ROUNDSM(io[0],io[1],
-		CamelliaSubkeyL(4),CamelliaSubkeyR(4),
-		io[2],io[3],il,ir,t0,t1);
-	CAMELLIA_ROUNDSM(io[2],io[3],
-		CamelliaSubkeyL(5),CamelliaSubkeyR(5),
-		io[0],io[1],il,ir,t0,t1);
-	CAMELLIA_ROUNDSM(io[0],io[1],
-		CamelliaSubkeyL(6),CamelliaSubkeyR(6),
-		io[2],io[3],il,ir,t0,t1);
-	CAMELLIA_ROUNDSM(io[2],io[3],
-		CamelliaSubkeyL(7),CamelliaSubkeyR(7),
-		io[0],io[1],il,ir,t0,t1);
-
-	CAMELLIA_FLS(io[0],io[1],io[2],io[3],
-		CamelliaSubkeyL(8),CamelliaSubkeyR(8),
-		CamelliaSubkeyL(9),CamelliaSubkeyR(9),
-		t0,t1,il,ir);
-
-	CAMELLIA_ROUNDSM(io[0],io[1],
-		CamelliaSubkeyL(10),CamelliaSubkeyR(10),
-		io[2],io[3],il,ir,t0,t1);
-	CAMELLIA_ROUNDSM(io[2],io[3],
-		CamelliaSubkeyL(11),CamelliaSubkeyR(11),
-		io[0],io[1],il,ir,t0,t1);
-	CAMELLIA_ROUNDSM(io[0],io[1],
-		CamelliaSubkeyL(12),CamelliaSubkeyR(12),
-		io[2],io[3],il,ir,t0,t1);
-	CAMELLIA_ROUNDSM(io[2],io[3],
-		CamelliaSubkeyL(13),CamelliaSubkeyR(13),
-		io[0],io[1],il,ir,t0,t1);
-	CAMELLIA_ROUNDSM(io[0],io[1],
-		CamelliaSubkeyL(14),CamelliaSubkeyR(14),
-		io[2],io[3],il,ir,t0,t1);
-	CAMELLIA_ROUNDSM(io[2],io[3],
-		CamelliaSubkeyL(15),CamelliaSubkeyR(15),
-		io[0],io[1],il,ir,t0,t1);
-
-	CAMELLIA_FLS(io[0],io[1],io[2],io[3],
-		CamelliaSubkeyL(16),CamelliaSubkeyR(16),
-		CamelliaSubkeyL(17),CamelliaSubkeyR(17),
-		t0,t1,il,ir);
-
-	CAMELLIA_ROUNDSM(io[0],io[1],
-		CamelliaSubkeyL(18),CamelliaSubkeyR(18),
-		io[2],io[3],il,ir,t0,t1);
-	CAMELLIA_ROUNDSM(io[2],io[3],
-		CamelliaSubkeyL(19),CamelliaSubkeyR(19),
-		io[0],io[1],il,ir,t0,t1);
-	CAMELLIA_ROUNDSM(io[0],io[1],
-		CamelliaSubkeyL(20),CamelliaSubkeyR(20),
-		io[2],io[3],il,ir,t0,t1);
-	CAMELLIA_ROUNDSM(io[2],io[3],
-		CamelliaSubkeyL(21),CamelliaSubkeyR(21),
-		io[0],io[1],il,ir,t0,t1);
-	CAMELLIA_ROUNDSM(io[0],io[1],
-		CamelliaSubkeyL(22),CamelliaSubkeyR(22),
-		io[2],io[3],il,ir,t0,t1);
-	CAMELLIA_ROUNDSM(io[2],io[3],
-		CamelliaSubkeyL(23),CamelliaSubkeyR(23),
-		io[0],io[1],il,ir,t0,t1);
-
-	/* post whitening but kw4 */
-	io[2] ^= CamelliaSubkeyL(24);
-	io[3] ^= CamelliaSubkeyR(24);
-
-	t0 = io[0];
-	t1 = io[1];
-	io[0] = io[2];
-	io[1] = io[3];
-	io[2] = t0;
-	io[3] = t1;
-
-	return;
-	}
-
-void camellia_decrypt128(const u32 *subkey, u32 *io)
-	{
-	u32 il,ir,t0,t1;               /* temporary valiables */
-
-	/* pre whitening but absorb kw2*/
-	io[0] ^= CamelliaSubkeyL(24);
-	io[1] ^= CamelliaSubkeyR(24);
-
-	/* main iteration */
-	CAMELLIA_ROUNDSM(io[0],io[1],
-		CamelliaSubkeyL(23),CamelliaSubkeyR(23),
-		io[2],io[3],il,ir,t0,t1);
-	CAMELLIA_ROUNDSM(io[2],io[3],
-		CamelliaSubkeyL(22),CamelliaSubkeyR(22),
-		io[0],io[1],il,ir,t0,t1);
-	CAMELLIA_ROUNDSM(io[0],io[1],
-		CamelliaSubkeyL(21),CamelliaSubkeyR(21),
-		io[2],io[3],il,ir,t0,t1);
-	CAMELLIA_ROUNDSM(io[2],io[3],
-		CamelliaSubkeyL(20),CamelliaSubkeyR(20),
-		io[0],io[1],il,ir,t0,t1);
-	CAMELLIA_ROUNDSM(io[0],io[1],
-		CamelliaSubkeyL(19),CamelliaSubkeyR(19),
-		io[2],io[3],il,ir,t0,t1);
-	CAMELLIA_ROUNDSM(io[2],io[3],
-		CamelliaSubkeyL(18),CamelliaSubkeyR(18),
-		io[0],io[1],il,ir,t0,t1);
-
-	CAMELLIA_FLS(io[0],io[1],io[2],io[3],
-		CamelliaSubkeyL(17),CamelliaSubkeyR(17),
-		CamelliaSubkeyL(16),CamelliaSubkeyR(16),
-		t0,t1,il,ir);
-
-	CAMELLIA_ROUNDSM(io[0],io[1],
-		CamelliaSubkeyL(15),CamelliaSubkeyR(15),
-		io[2],io[3],il,ir,t0,t1);
-	CAMELLIA_ROUNDSM(io[2],io[3],
-		CamelliaSubkeyL(14),CamelliaSubkeyR(14),
-		io[0],io[1],il,ir,t0,t1);
-	CAMELLIA_ROUNDSM(io[0],io[1],
-		CamelliaSubkeyL(13),CamelliaSubkeyR(13),
-		io[2],io[3],il,ir,t0,t1);
-	CAMELLIA_ROUNDSM(io[2],io[3],
-		CamelliaSubkeyL(12),CamelliaSubkeyR(12),
-		io[0],io[1],il,ir,t0,t1);
-	CAMELLIA_ROUNDSM(io[0],io[1],
-		CamelliaSubkeyL(11),CamelliaSubkeyR(11),
-		io[2],io[3],il,ir,t0,t1);
-	CAMELLIA_ROUNDSM(io[2],io[3],
-		CamelliaSubkeyL(10),CamelliaSubkeyR(10),
-		io[0],io[1],il,ir,t0,t1);
-
-	CAMELLIA_FLS(io[0],io[1],io[2],io[3],
-		CamelliaSubkeyL(9),CamelliaSubkeyR(9),
-		CamelliaSubkeyL(8),CamelliaSubkeyR(8),
-		t0,t1,il,ir);
-
-	CAMELLIA_ROUNDSM(io[0],io[1],
-		CamelliaSubkeyL(7),CamelliaSubkeyR(7),
-		io[2],io[3],il,ir,t0,t1);
-	CAMELLIA_ROUNDSM(io[2],io[3],
-		CamelliaSubkeyL(6),CamelliaSubkeyR(6),
-		io[0],io[1],il,ir,t0,t1);
-	CAMELLIA_ROUNDSM(io[0],io[1],
-		CamelliaSubkeyL(5),CamelliaSubkeyR(5),
-		io[2],io[3],il,ir,t0,t1);
-	CAMELLIA_ROUNDSM(io[2],io[3],
-		CamelliaSubkeyL(4),CamelliaSubkeyR(4),
-		io[0],io[1],il,ir,t0,t1);
-	CAMELLIA_ROUNDSM(io[0],io[1],
-		CamelliaSubkeyL(3),CamelliaSubkeyR(3),
-		io[2],io[3],il,ir,t0,t1);
-	CAMELLIA_ROUNDSM(io[2],io[3],
-		CamelliaSubkeyL(2),CamelliaSubkeyR(2),
-		io[0],io[1],il,ir,t0,t1);
-
-	/* post whitening but kw4 */
-	io[2] ^= CamelliaSubkeyL(0);
-	io[3] ^= CamelliaSubkeyR(0);
-
-	t0 = io[0];
-	t1 = io[1];
-	io[0] = io[2];
-	io[1] = io[3];
-	io[2] = t0;
-	io[3] = t1;
-
-	return;
-	}
-
-/**
- * stuff for 192 and 256bit encryption/decryption
- */
-void camellia_encrypt256(const u32 *subkey, u32 *io)
-	{
-	u32 il,ir,t0,t1;           /* temporary valiables */
-
-	/* pre whitening but absorb kw2*/
-	io[0] ^= CamelliaSubkeyL(0);
-	io[1] ^= CamelliaSubkeyR(0);
-
-	/* main iteration */
-	CAMELLIA_ROUNDSM(io[0],io[1],
-		CamelliaSubkeyL(2),CamelliaSubkeyR(2),
-		io[2],io[3],il,ir,t0,t1);
-	CAMELLIA_ROUNDSM(io[2],io[3],
-		CamelliaSubkeyL(3),CamelliaSubkeyR(3),
-		io[0],io[1],il,ir,t0,t1);
-	CAMELLIA_ROUNDSM(io[0],io[1],
-		CamelliaSubkeyL(4),CamelliaSubkeyR(4),
-		io[2],io[3],il,ir,t0,t1);
-	CAMELLIA_ROUNDSM(io[2],io[3],
-		CamelliaSubkeyL(5),CamelliaSubkeyR(5),
-		io[0],io[1],il,ir,t0,t1);
-	CAMELLIA_ROUNDSM(io[0],io[1],
-		CamelliaSubkeyL(6),CamelliaSubkeyR(6),
-		io[2],io[3],il,ir,t0,t1);
-	CAMELLIA_ROUNDSM(io[2],io[3],
-		CamelliaSubkeyL(7),CamelliaSubkeyR(7),
-		io[0],io[1],il,ir,t0,t1);
-
-	CAMELLIA_FLS(io[0],io[1],io[2],io[3],
-		CamelliaSubkeyL(8),CamelliaSubkeyR(8),
-		CamelliaSubkeyL(9),CamelliaSubkeyR(9),
-		t0,t1,il,ir);
-
-	CAMELLIA_ROUNDSM(io[0],io[1],
-		CamelliaSubkeyL(10),CamelliaSubkeyR(10),
-		io[2],io[3],il,ir,t0,t1);
-	CAMELLIA_ROUNDSM(io[2],io[3],
-		CamelliaSubkeyL(11),CamelliaSubkeyR(11),
-		io[0],io[1],il,ir,t0,t1);
-	CAMELLIA_ROUNDSM(io[0],io[1],
-		CamelliaSubkeyL(12),CamelliaSubkeyR(12),
-		io[2],io[3],il,ir,t0,t1);
-	CAMELLIA_ROUNDSM(io[2],io[3],
-		CamelliaSubkeyL(13),CamelliaSubkeyR(13),
-		io[0],io[1],il,ir,t0,t1);
-	CAMELLIA_ROUNDSM(io[0],io[1],
-		CamelliaSubkeyL(14),CamelliaSubkeyR(14),
-		io[2],io[3],il,ir,t0,t1);
-	CAMELLIA_ROUNDSM(io[2],io[3],
-		CamelliaSubkeyL(15),CamelliaSubkeyR(15),
-		io[0],io[1],il,ir,t0,t1);
-
-	CAMELLIA_FLS(io[0],io[1],io[2],io[3],
-		CamelliaSubkeyL(16),CamelliaSubkeyR(16),
-		CamelliaSubkeyL(17),CamelliaSubkeyR(17),
-		t0,t1,il,ir);
-
-	CAMELLIA_ROUNDSM(io[0],io[1],
-		CamelliaSubkeyL(18),CamelliaSubkeyR(18),
-		io[2],io[3],il,ir,t0,t1);
-	CAMELLIA_ROUNDSM(io[2],io[3],
-		CamelliaSubkeyL(19),CamelliaSubkeyR(19),
-		io[0],io[1],il,ir,t0,t1);
-	CAMELLIA_ROUNDSM(io[0],io[1],
-		CamelliaSubkeyL(20),CamelliaSubkeyR(20),
-		io[2],io[3],il,ir,t0,t1);
-	CAMELLIA_ROUNDSM(io[2],io[3],
-		CamelliaSubkeyL(21),CamelliaSubkeyR(21),
-		io[0],io[1],il,ir,t0,t1);
-	CAMELLIA_ROUNDSM(io[0],io[1],
-		CamelliaSubkeyL(22),CamelliaSubkeyR(22),
-		io[2],io[3],il,ir,t0,t1);
-	CAMELLIA_ROUNDSM(io[2],io[3],
-		CamelliaSubkeyL(23),CamelliaSubkeyR(23),
-		io[0],io[1],il,ir,t0,t1);
-
-	CAMELLIA_FLS(io[0],io[1],io[2],io[3],
-		CamelliaSubkeyL(24),CamelliaSubkeyR(24),
-		CamelliaSubkeyL(25),CamelliaSubkeyR(25),
-		t0,t1,il,ir);
-
-	CAMELLIA_ROUNDSM(io[0],io[1],
-		CamelliaSubkeyL(26),CamelliaSubkeyR(26),
-		io[2],io[3],il,ir,t0,t1);
-	CAMELLIA_ROUNDSM(io[2],io[3],
-		CamelliaSubkeyL(27),CamelliaSubkeyR(27),
-		io[0],io[1],il,ir,t0,t1);
-	CAMELLIA_ROUNDSM(io[0],io[1],
-		CamelliaSubkeyL(28),CamelliaSubkeyR(28),
-		io[2],io[3],il,ir,t0,t1);
-	CAMELLIA_ROUNDSM(io[2],io[3],
-		CamelliaSubkeyL(29),CamelliaSubkeyR(29),
-		io[0],io[1],il,ir,t0,t1);
-	CAMELLIA_ROUNDSM(io[0],io[1],
-		CamelliaSubkeyL(30),CamelliaSubkeyR(30),
-		io[2],io[3],il,ir,t0,t1);
-	CAMELLIA_ROUNDSM(io[2],io[3],
-		CamelliaSubkeyL(31),CamelliaSubkeyR(31),
-		io[0],io[1],il,ir,t0,t1);
-
-	/* post whitening but kw4 */
-	io[2] ^= CamelliaSubkeyL(32);
-	io[3] ^= CamelliaSubkeyR(32);
-
-	t0 = io[0];
-	t1 = io[1];
-	io[0] = io[2];
-	io[1] = io[3];
-	io[2] = t0;
-	io[3] = t1;
-
-	return;
-	}
-
-void camellia_decrypt256(const u32 *subkey, u32 *io)
-	{
-	u32 il,ir,t0,t1;           /* temporary valiables */
-
-	/* pre whitening but absorb kw2*/
-	io[0] ^= CamelliaSubkeyL(32);
-	io[1] ^= CamelliaSubkeyR(32);
-	
-	/* main iteration */
-	CAMELLIA_ROUNDSM(io[0],io[1],
-		CamelliaSubkeyL(31),CamelliaSubkeyR(31),
-		io[2],io[3],il,ir,t0,t1);
-	CAMELLIA_ROUNDSM(io[2],io[3],
-		CamelliaSubkeyL(30),CamelliaSubkeyR(30),
-		io[0],io[1],il,ir,t0,t1);
-	CAMELLIA_ROUNDSM(io[0],io[1],
-		CamelliaSubkeyL(29),CamelliaSubkeyR(29),
-		io[2],io[3],il,ir,t0,t1);
-	CAMELLIA_ROUNDSM(io[2],io[3],
-		CamelliaSubkeyL(28),CamelliaSubkeyR(28),
-		io[0],io[1],il,ir,t0,t1);
-	CAMELLIA_ROUNDSM(io[0],io[1],
-		CamelliaSubkeyL(27),CamelliaSubkeyR(27),
-		io[2],io[3],il,ir,t0,t1);
-	CAMELLIA_ROUNDSM(io[2],io[3],
-		CamelliaSubkeyL(26),CamelliaSubkeyR(26),
-		io[0],io[1],il,ir,t0,t1);
-
-	CAMELLIA_FLS(io[0],io[1],io[2],io[3],
-		CamelliaSubkeyL(25),CamelliaSubkeyR(25),
-		CamelliaSubkeyL(24),CamelliaSubkeyR(24),
-		t0,t1,il,ir);
-
-	CAMELLIA_ROUNDSM(io[0],io[1],
-		CamelliaSubkeyL(23),CamelliaSubkeyR(23),
-		io[2],io[3],il,ir,t0,t1);
-	CAMELLIA_ROUNDSM(io[2],io[3],
-		CamelliaSubkeyL(22),CamelliaSubkeyR(22),
-		io[0],io[1],il,ir,t0,t1);
-	CAMELLIA_ROUNDSM(io[0],io[1],
-		CamelliaSubkeyL(21),CamelliaSubkeyR(21),
-		io[2],io[3],il,ir,t0,t1);
-	CAMELLIA_ROUNDSM(io[2],io[3],
-		CamelliaSubkeyL(20),CamelliaSubkeyR(20),
-		io[0],io[1],il,ir,t0,t1);
-	CAMELLIA_ROUNDSM(io[0],io[1],
-		CamelliaSubkeyL(19),CamelliaSubkeyR(19),
-		io[2],io[3],il,ir,t0,t1);
-	CAMELLIA_ROUNDSM(io[2],io[3],
-		CamelliaSubkeyL(18),CamelliaSubkeyR(18),
-		io[0],io[1],il,ir,t0,t1);
-
-	CAMELLIA_FLS(io[0],io[1],io[2],io[3],
-		CamelliaSubkeyL(17),CamelliaSubkeyR(17),
-		CamelliaSubkeyL(16),CamelliaSubkeyR(16),
-		t0,t1,il,ir);
-
-	CAMELLIA_ROUNDSM(io[0],io[1],
-		CamelliaSubkeyL(15),CamelliaSubkeyR(15),
-		io[2],io[3],il,ir,t0,t1);
-	CAMELLIA_ROUNDSM(io[2],io[3],
-		CamelliaSubkeyL(14),CamelliaSubkeyR(14),
-		io[0],io[1],il,ir,t0,t1);
-	CAMELLIA_ROUNDSM(io[0],io[1],
-		CamelliaSubkeyL(13),CamelliaSubkeyR(13),
-		io[2],io[3],il,ir,t0,t1);
-	CAMELLIA_ROUNDSM(io[2],io[3],
-		CamelliaSubkeyL(12),CamelliaSubkeyR(12),
-		io[0],io[1],il,ir,t0,t1);
-	CAMELLIA_ROUNDSM(io[0],io[1],
-		CamelliaSubkeyL(11),CamelliaSubkeyR(11),
-		io[2],io[3],il,ir,t0,t1);
-	CAMELLIA_ROUNDSM(io[2],io[3],
-		CamelliaSubkeyL(10),CamelliaSubkeyR(10),
-		io[0],io[1],il,ir,t0,t1);
-
-	CAMELLIA_FLS(io[0],io[1],io[2],io[3],
-		CamelliaSubkeyL(9),CamelliaSubkeyR(9),
-		CamelliaSubkeyL(8),CamelliaSubkeyR(8),
-		t0,t1,il,ir);
-
-	CAMELLIA_ROUNDSM(io[0],io[1],
-		CamelliaSubkeyL(7),CamelliaSubkeyR(7),
-		io[2],io[3],il,ir,t0,t1);
-	CAMELLIA_ROUNDSM(io[2],io[3],
-		CamelliaSubkeyL(6),CamelliaSubkeyR(6),
-		io[0],io[1],il,ir,t0,t1);
-	CAMELLIA_ROUNDSM(io[0],io[1],
-		CamelliaSubkeyL(5),CamelliaSubkeyR(5),
-		io[2],io[3],il,ir,t0,t1);
-	CAMELLIA_ROUNDSM(io[2],io[3],
-		CamelliaSubkeyL(4),CamelliaSubkeyR(4),
-		io[0],io[1],il,ir,t0,t1);
-	CAMELLIA_ROUNDSM(io[0],io[1],
-		CamelliaSubkeyL(3),CamelliaSubkeyR(3),
-		io[2],io[3],il,ir,t0,t1);
-	CAMELLIA_ROUNDSM(io[2],io[3],
-		CamelliaSubkeyL(2),CamelliaSubkeyR(2),
-		io[0],io[1],il,ir,t0,t1);
-
-	/* post whitening but kw4 */
-	io[2] ^= CamelliaSubkeyL(0);
-	io[3] ^= CamelliaSubkeyR(0);
-
-	t0 = io[0];
-	t1 = io[1];
-	io[0] = io[2];
-	io[1] = io[3];
-	io[2] = t0;
-	io[3] = t1;
-
-	return;
-	}
-
diff --git a/crypto/openssl/crypto/camellia/camellia.h b/crypto/openssl/crypto/camellia/camellia.h
deleted file mode 100644
index 3c8a35954342..000000000000
--- a/crypto/openssl/crypto/camellia/camellia.h
+++ /dev/null
@@ -1,129 +0,0 @@
-/* crypto/camellia/camellia.h -*- mode:C; c-file-style: "eay" -*- */
-/* ====================================================================
- * Copyright (c) 2006 The OpenSSL Project.  All rights reserved.
- *
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions
- * are met:
- *
- * 1. Redistributions of source code must retain the above copyright
- *    notice, this list of conditions and the following disclaimer. 
- *
- * 2. Redistributions in binary form must reproduce the above copyright
- *    notice, this list of conditions and the following disclaimer in
- *    the documentation and/or other materials provided with the
- *    distribution.
- *
- * 3. All advertising materials mentioning features or use of this
- *    software must display the following acknowledgment:
- *    "This product includes software developed by the OpenSSL Project
- *    for use in the OpenSSL Toolkit. (http://www.openssl.org/)"
- *
- * 4. The names "OpenSSL Toolkit" and "OpenSSL Project" must not be used to
- *    endorse or promote products derived from this software without
- *    prior written permission. For written permission, please contact
- *    openssl-core@openssl.org.
- *
- * 5. Products derived from this software may not be called "OpenSSL"
- *    nor may "OpenSSL" appear in their names without prior written
- *    permission of the OpenSSL Project.
- *
- * 6. Redistributions of any form whatsoever must retain the following
- *    acknowledgment:
- *    "This product includes software developed by the OpenSSL Project
- *    for use in the OpenSSL Toolkit (http://www.openssl.org/)"
- *
- * THIS SOFTWARE IS PROVIDED BY THE OpenSSL PROJECT ``AS IS'' AND ANY
- * EXPRESSED OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
- * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR
- * PURPOSE ARE DISCLAIMED.  IN NO EVENT SHALL THE OpenSSL PROJECT OR
- * ITS CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
- * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
- * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
- * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
- * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
- * STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
- * ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED
- * OF THE POSSIBILITY OF SUCH DAMAGE.
- * ====================================================================
- *
- */
-
-#ifndef HEADER_CAMELLIA_H
-#define HEADER_CAMELLIA_H
-
-#include <openssl/opensslconf.h>
-
-#ifdef OPENSSL_NO_CAMELLIA
-#error CAMELLIA is disabled.
-#endif
-
-#define CAMELLIA_ENCRYPT	1
-#define CAMELLIA_DECRYPT	0
-
-/* Because array size can't be a const in C, the following two are macros.
-   Both sizes are in bytes. */
-
-#ifdef  __cplusplus
-extern "C" {
-#endif
-
-/* This should be a hidden type, but EVP requires that the size be known */
-
-#define CAMELLIA_BLOCK_SIZE 16
-#define CAMELLIA_TABLE_BYTE_LEN 272
-#define CAMELLIA_TABLE_WORD_LEN (CAMELLIA_TABLE_BYTE_LEN / 4)
-
- /* to match with WORD */
-typedef unsigned int KEY_TABLE_TYPE[CAMELLIA_TABLE_WORD_LEN];
-
-struct camellia_key_st 
-	{
-	KEY_TABLE_TYPE rd_key;
-	int bitLength;
-	void (*enc)(const unsigned int *subkey, unsigned int *io);
-	void (*dec)(const unsigned int *subkey, unsigned int *io);
-	};
-
-typedef struct camellia_key_st CAMELLIA_KEY;
-
-int Camellia_set_key(const unsigned char *userKey, const int bits,
-	CAMELLIA_KEY *key);
-
-void Camellia_encrypt(const unsigned char *in, unsigned char *out,
-	const CAMELLIA_KEY *key);
-void Camellia_decrypt(const unsigned char *in, unsigned char *out,
-	const CAMELLIA_KEY *key);
-
-void Camellia_ecb_encrypt(const unsigned char *in, unsigned char *out,
-	const CAMELLIA_KEY *key, const int enc);
-void Camellia_cbc_encrypt(const unsigned char *in, unsigned char *out,
-	const unsigned long length, const CAMELLIA_KEY *key,
-	unsigned char *ivec, const int enc);
-void Camellia_cfb128_encrypt(const unsigned char *in, unsigned char *out,
-	const unsigned long length, const CAMELLIA_KEY *key,
-	unsigned char *ivec, int *num, const int enc);
-void Camellia_cfb1_encrypt(const unsigned char *in, unsigned char *out,
-	const unsigned long length, const CAMELLIA_KEY *key,
-	unsigned char *ivec, int *num, const int enc);
-void Camellia_cfb8_encrypt(const unsigned char *in, unsigned char *out,
-	const unsigned long length, const CAMELLIA_KEY *key,
-	unsigned char *ivec, int *num, const int enc);
-void Camellia_cfbr_encrypt_block(const unsigned char *in,unsigned char *out,
-	const int nbits,const CAMELLIA_KEY *key,
-	unsigned char *ivec,const int enc);
-void Camellia_ofb128_encrypt(const unsigned char *in, unsigned char *out,
-	const unsigned long length, const CAMELLIA_KEY *key,
-	unsigned char *ivec, int *num);
-void Camellia_ctr128_encrypt(const unsigned char *in, unsigned char *out,
-	const unsigned long length, const CAMELLIA_KEY *key,
-	unsigned char ivec[CAMELLIA_BLOCK_SIZE],
-	unsigned char ecount_buf[CAMELLIA_BLOCK_SIZE],
-	unsigned int *num);
-
-#ifdef  __cplusplus
-}
-#endif
-
-#endif /* !HEADER_Camellia_H */
-
diff --git a/crypto/openssl/crypto/camellia/cmll_cbc.c b/crypto/openssl/crypto/camellia/cmll_cbc.c
deleted file mode 100644
index 4141a7b59bb7..000000000000
--- a/crypto/openssl/crypto/camellia/cmll_cbc.c
+++ /dev/null
@@ -1,273 +0,0 @@
-/* crypto/camellia/camellia_cbc.c -*- mode:C; c-file-style: "eay" -*- */
-/* ====================================================================
- * Copyright (c) 2006 The OpenSSL Project.  All rights reserved.
- *
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions
- * are met:
- *
- * 1. Redistributions of source code must retain the above copyright
- *    notice, this list of conditions and the following disclaimer. 
- *
- * 2. Redistributions in binary form must reproduce the above copyright
- *    notice, this list of conditions and the following disclaimer in
- *    the documentation and/or other materials provided with the
- *    distribution.
- *
- * 3. All advertising materials mentioning features or use of this
- *    software must display the following acknowledgment:
- *    "This product includes software developed by the OpenSSL Project
- *    for use in the OpenSSL Toolkit. (http://www.openssl.org/)"
- *
- * 4. The names "OpenSSL Toolkit" and "OpenSSL Project" must not be used to
- *    endorse or promote products derived from this software without
- *    prior written permission. For written permission, please contact
- *    openssl-core@openssl.org.
- *
- * 5. Products derived from this software may not be called "OpenSSL"
- *    nor may "OpenSSL" appear in their names without prior written
- *    permission of the OpenSSL Project.
- *
- * 6. Redistributions of any form whatsoever must retain the following
- *    acknowledgment:
- *    "This product includes software developed by the OpenSSL Project
- *    for use in the OpenSSL Toolkit (http://www.openssl.org/)"
- *
- * THIS SOFTWARE IS PROVIDED BY THE OpenSSL PROJECT ``AS IS'' AND ANY
- * EXPRESSED OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
- * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR
- * PURPOSE ARE DISCLAIMED.  IN NO EVENT SHALL THE OpenSSL PROJECT OR
- * ITS CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
- * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
- * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
- * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
- * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
- * STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
- * ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED
- * OF THE POSSIBILITY OF SUCH DAMAGE.
- * ====================================================================
- *
- */
-
-#ifndef CAMELLIA_DEBUG
-# ifndef NDEBUG
-#  define NDEBUG
-# endif
-#endif
-#include <assert.h>
-#include <stdio.h>
-#include <string.h>
-
-#include <openssl/camellia.h>
-#include "cmll_locl.h"
-
-void Camellia_cbc_encrypt(const unsigned char *in, unsigned char *out,
-		     const unsigned long length, const CAMELLIA_KEY *key,
-		     unsigned char *ivec, const int enc) {
-
-	unsigned long n;
-	unsigned long len = length;
-	const unsigned char *iv = ivec;
-	union {	u32 t32[CAMELLIA_BLOCK_SIZE/sizeof(u32)];
-		u8  t8 [CAMELLIA_BLOCK_SIZE]; } tmp;
-	const union { long one; char little; } camellia_endian = {1};
-
-
-	assert(in && out && key && ivec);
-	assert((CAMELLIA_ENCRYPT == enc)||(CAMELLIA_DECRYPT == enc));
-
-	if(((size_t)in|(size_t)out|(size_t)ivec) % sizeof(u32) == 0)
-		{
-		if (CAMELLIA_ENCRYPT == enc)
-			{
-			while (len >= CAMELLIA_BLOCK_SIZE)
-				{
-				XOR4WORD2((u32 *)out,
-					(u32 *)in, (u32 *)iv);
-				if (camellia_endian.little)
-					SWAP4WORD((u32 *)out);
-				key->enc(key->rd_key, (u32 *)out);
-				if (camellia_endian.little)
-					SWAP4WORD((u32 *)out);
-				iv = out;
-				len -= CAMELLIA_BLOCK_SIZE;
-				in += CAMELLIA_BLOCK_SIZE;
-				out += CAMELLIA_BLOCK_SIZE;
-				}
-			if (len)
-				{
-				for(n=0; n < len; ++n)
-					out[n] = in[n] ^ iv[n];
-				for(n=len; n < CAMELLIA_BLOCK_SIZE; ++n)
-					out[n] = iv[n];
-				if (camellia_endian.little)
-					SWAP4WORD((u32 *)out);
-				key->enc(key->rd_key, (u32 *)out);
-				if (camellia_endian.little)
-					SWAP4WORD((u32 *)out);
-				iv = out;
-				}
-			memcpy(ivec,iv,CAMELLIA_BLOCK_SIZE);
-			}
-		else if (in != out)
-			{
-			while (len >= CAMELLIA_BLOCK_SIZE)
-				{
-				memcpy(out,in,CAMELLIA_BLOCK_SIZE);
-				if (camellia_endian.little)
-					SWAP4WORD((u32 *)out);
-				key->dec(key->rd_key,(u32 *)out);
-				if (camellia_endian.little)
-					SWAP4WORD((u32 *)out);
-				XOR4WORD((u32 *)out, (u32 *)iv);
-				iv = in;
-				len -= CAMELLIA_BLOCK_SIZE;
-				in  += CAMELLIA_BLOCK_SIZE;
-				out += CAMELLIA_BLOCK_SIZE;
-				}
-			if (len)
-				{
-				memcpy(tmp.t8, in, CAMELLIA_BLOCK_SIZE);
-				if (camellia_endian.little)
-					SWAP4WORD(tmp.t32);
-				key->dec(key->rd_key, tmp.t32);
-				if (camellia_endian.little)
-					SWAP4WORD(tmp.t32);
-				for(n=0; n < len; ++n)
-					out[n] = tmp.t8[n] ^ iv[n];
-				iv = in;
-				}
-			memcpy(ivec,iv,CAMELLIA_BLOCK_SIZE);
-			}
-		else /* in == out */
-			{
-			while (len >= CAMELLIA_BLOCK_SIZE)
-				{
-				memcpy(tmp.t8, in, CAMELLIA_BLOCK_SIZE);
-				if (camellia_endian.little)
-					SWAP4WORD((u32 *)out);
-				key->dec(key->rd_key, (u32 *)out);
-				if (camellia_endian.little)
-					SWAP4WORD((u32 *)out);
-				XOR4WORD((u32 *)out, (u32 *)ivec);
-				memcpy(ivec, tmp.t8, CAMELLIA_BLOCK_SIZE);
-				len -= CAMELLIA_BLOCK_SIZE;
-				in += CAMELLIA_BLOCK_SIZE;
-				out += CAMELLIA_BLOCK_SIZE;
-				}
-			if (len)
-				{
-				memcpy(tmp.t8, in, CAMELLIA_BLOCK_SIZE);
-				if (camellia_endian.little)
-					SWAP4WORD((u32 *)out);
-				key->dec(key->rd_key,(u32 *)out);
-				if (camellia_endian.little)
-					SWAP4WORD((u32 *)out);
-				for(n=0; n < len; ++n)
-					out[n] ^= ivec[n];
-				for(n=len; n < CAMELLIA_BLOCK_SIZE; ++n)
-					out[n] = tmp.t8[n];
-				memcpy(ivec, tmp.t8, CAMELLIA_BLOCK_SIZE);
-				}
-			}
-		}
-	else /* no aligned */
-		{
-		if (CAMELLIA_ENCRYPT == enc)
-			{
-			while (len >= CAMELLIA_BLOCK_SIZE)
-				{
-				for(n=0; n < CAMELLIA_BLOCK_SIZE; ++n)
-					tmp.t8[n] = in[n] ^ iv[n];
-				if (camellia_endian.little)
-					SWAP4WORD(tmp.t32);
-				key->enc(key->rd_key, tmp.t32);
-				if (camellia_endian.little)
-					SWAP4WORD(tmp.t32);
-				memcpy(out, tmp.t8, CAMELLIA_BLOCK_SIZE);
-				iv = out;
-				len -= CAMELLIA_BLOCK_SIZE;
-				in += CAMELLIA_BLOCK_SIZE;
-				out += CAMELLIA_BLOCK_SIZE;
-				}
-			if (len)
-				{
-				for(n=0; n < len; ++n)
-					tmp.t8[n] = in[n] ^ iv[n];
-				for(n=len; n < CAMELLIA_BLOCK_SIZE; ++n)
-					tmp.t8[n] = iv[n];
-				if (camellia_endian.little)
-					SWAP4WORD(tmp.t32);
-				key->enc(key->rd_key, tmp.t32);
-				if (camellia_endian.little)
-					SWAP4WORD(tmp.t32);
-				memcpy(out, tmp.t8, CAMELLIA_BLOCK_SIZE);
-				iv = out;
-				}
-			memcpy(ivec,iv,CAMELLIA_BLOCK_SIZE);
-			}
-		else if (in != out)
-			{
-			while (len >= CAMELLIA_BLOCK_SIZE)
-				{
-				memcpy(tmp.t8,in,CAMELLIA_BLOCK_SIZE);
-				if (camellia_endian.little)
-					SWAP4WORD(tmp.t32);
-				key->dec(key->rd_key,tmp.t32);
-				if (camellia_endian.little)
-					SWAP4WORD(tmp.t32);
-				for(n=0; n < CAMELLIA_BLOCK_SIZE; ++n)
-					out[n] = tmp.t8[n] ^ iv[n];
-				iv = in;
-				len -= CAMELLIA_BLOCK_SIZE;
-				in  += CAMELLIA_BLOCK_SIZE;
-				out += CAMELLIA_BLOCK_SIZE;
-				}
-			if (len)
-				{
-				memcpy(tmp.t8, in, CAMELLIA_BLOCK_SIZE);
-				if (camellia_endian.little)
-					SWAP4WORD(tmp.t32);
-				key->dec(key->rd_key, tmp.t32);
-				if (camellia_endian.little)
-					SWAP4WORD(tmp.t32);
-				for(n=0; n < len; ++n)
-					out[n] = tmp.t8[n] ^ iv[n];
-				iv = in;
-				}
-			memcpy(ivec,iv,CAMELLIA_BLOCK_SIZE);
-			}
-		else
-			{
-			while (len >= CAMELLIA_BLOCK_SIZE)
-				{
-				memcpy(tmp.t8, in, CAMELLIA_BLOCK_SIZE);
-				if (camellia_endian.little)
-					SWAP4WORD(tmp.t32);
-				key->dec(key->rd_key, tmp.t32);
-				if (camellia_endian.little)
-					SWAP4WORD(tmp.t32);
-				for(n=0; n < CAMELLIA_BLOCK_SIZE; ++n)
-					tmp.t8[n] ^= ivec[n];
-				memcpy(ivec, in, CAMELLIA_BLOCK_SIZE);
-				memcpy(out, tmp.t8, CAMELLIA_BLOCK_SIZE);
-				len -= CAMELLIA_BLOCK_SIZE;
-				in += CAMELLIA_BLOCK_SIZE;
-				out += CAMELLIA_BLOCK_SIZE;
-				}
-			if (len)
-				{
-				memcpy(tmp.t8, in, CAMELLIA_BLOCK_SIZE);
-				if (camellia_endian.little)
-					SWAP4WORD(tmp.t32);
-				key->dec(key->rd_key,tmp.t32);
-				if (camellia_endian.little)
-					SWAP4WORD(tmp.t32);
-				for(n=0; n < len; ++n)
-					tmp.t8[n] ^= ivec[n];
-				memcpy(ivec, in, CAMELLIA_BLOCK_SIZE);
-				memcpy(out,tmp.t8,len);
-				}
-			}
-		}
-}
diff --git a/crypto/openssl/crypto/camellia/cmll_cfb.c b/crypto/openssl/crypto/camellia/cmll_cfb.c
deleted file mode 100644
index af0f9f49ad90..000000000000
--- a/crypto/openssl/crypto/camellia/cmll_cfb.c
+++ /dev/null
@@ -1,235 +0,0 @@
-/* crypto/camellia/camellia_cfb.c -*- mode:C; c-file-style: "eay" -*- */
-/* ====================================================================
- * Copyright (c) 2006 The OpenSSL Project.  All rights reserved.
- *
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions
- * are met:
- *
- * 1. Redistributions of source code must retain the above copyright
- *    notice, this list of conditions and the following disclaimer. 
- *
- * 2. Redistributions in binary form must reproduce the above copyright
- *    notice, this list of conditions and the following disclaimer in
- *    the documentation and/or other materials provided with the
- *    distribution.
- *
- * 3. All advertising materials mentioning features or use of this
- *    software must display the following acknowledgment:
- *    "This product includes software developed by the OpenSSL Project
- *    for use in the OpenSSL Toolkit. (http://www.openssl.org/)"
- *
- * 4. The names "OpenSSL Toolkit" and "OpenSSL Project" must not be used to
- *    endorse or promote products derived from this software without
- *    prior written permission. For written permission, please contact
- *    openssl-core@openssl.org.
- *
- * 5. Products derived from this software may not be called "OpenSSL"
- *    nor may "OpenSSL" appear in their names without prior written
- *    permission of the OpenSSL Project.
- *
- * 6. Redistributions of any form whatsoever must retain the following
- *    acknowledgment:
- *    "This product includes software developed by the OpenSSL Project
- *    for use in the OpenSSL Toolkit (http://www.openssl.org/)"
- *
- * THIS SOFTWARE IS PROVIDED BY THE OpenSSL PROJECT ``AS IS'' AND ANY
- * EXPRESSED OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
- * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR
- * PURPOSE ARE DISCLAIMED.  IN NO EVENT SHALL THE OpenSSL PROJECT OR
- * ITS CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
- * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
- * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
- * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
- * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
- * STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
- * ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED
- * OF THE POSSIBILITY OF SUCH DAMAGE.
- * ====================================================================
- *
- */
-/* Copyright (C) 1995-1998 Eric Young (eay@cryptsoft.com)
- * All rights reserved.
- *
- * This package is an SSL implementation written
- * by Eric Young (eay@cryptsoft.com).
- * The implementation was written so as to conform with Netscapes SSL.
- * 
- * This library is free for commercial and non-commercial use as long as
- * the following conditions are aheared to.  The following conditions
- * apply to all code found in this distribution, be it the RC4, RSA,
- * lhash, DES, etc., code; not just the SSL code.  The SSL documentation
- * included with this distribution is covered by the same copyright terms
- * except that the holder is Tim Hudson (tjh@cryptsoft.com).
- * 
- * Copyright remains Eric Young's, and as such any Copyright notices in
- * the code are not to be removed.
- * If this package is used in a product, Eric Young should be given attribution
- * as the author of the parts of the library used.
- * This can be in the form of a textual message at program startup or
- * in documentation (online or textual) provided with the package.
- * 
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions
- * are met:
- * 1. Redistributions of source code must retain the copyright
- *    notice, this list of conditions and the following disclaimer.
- * 2. Redistributions in binary form must reproduce the above copyright
- *    notice, this list of conditions and the following disclaimer in the
- *    documentation and/or other materials provided with the distribution.
- * 3. All advertising materials mentioning features or use of this software
- *    must display the following acknowledgement:
- *    "This product includes cryptographic software written by
- *     Eric Young (eay@cryptsoft.com)"
- *    The word 'cryptographic' can be left out if the rouines from the library
- *    being used are not cryptographic related :-).
- * 4. If you include any Windows specific code (or a derivative thereof) from 
- *    the apps directory (application code) you must include an acknowledgement:
- *    "This product includes software written by Tim Hudson (tjh@cryptsoft.com)"
- * 
- * THIS SOFTWARE IS PROVIDED BY ERIC YOUNG ``AS IS'' AND
- * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
- * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
- * ARE DISCLAIMED.  IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE
- * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
- * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
- * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
- * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
- * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
- * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
- * SUCH DAMAGE.
- * 
- * The licence and distribution terms for any publically available version or
- * derivative of this code cannot be changed.  i.e. this code cannot simply be
- * copied and put under another distribution licence
- * [including the GNU Public Licence.]
- */
-
-#ifndef CAMELLIA_DEBUG
-# ifndef NDEBUG
-#  define NDEBUG
-# endif
-#endif
-#include <assert.h>
-#include <string.h>
-
-#include <openssl/camellia.h>
-#include "cmll_locl.h"
-#include "e_os.h"
-
-
-/* The input and output encrypted as though 128bit cfb mode is being
- * used.  The extra state information to record how much of the
- * 128bit block we have used is contained in *num;
- */
-
-void Camellia_cfb128_encrypt(const unsigned char *in, unsigned char *out,
-	const unsigned long length, const CAMELLIA_KEY *key,
-	unsigned char *ivec, int *num, const int enc)
-	{
-
-	unsigned int n;
-	unsigned long l = length;
-	unsigned char c;
-
-	assert(in && out && key && ivec && num);
-
-	n = *num;
-
-	if (enc) 
-		{
-		while (l--) 
-			{
-			if (n == 0) 
-				{
-				Camellia_encrypt(ivec, ivec, key);
-				}
-			ivec[n] = *(out++) = *(in++) ^ ivec[n];
-			n = (n+1) % CAMELLIA_BLOCK_SIZE;
-			}
-		} 
-	else 
-		{
-		while (l--) 
-			{
-			if (n == 0) 
-				{
-				Camellia_encrypt(ivec, ivec, key);
-				}
-			c = *(in);
-			*(out++) = *(in++) ^ ivec[n];
-			ivec[n] = c;
-			n = (n+1) % CAMELLIA_BLOCK_SIZE;
-			}
-		}
-
-	*num=n;
-	}
-
-/* This expects a single block of size nbits for both in and out. Note that
-   it corrupts any extra bits in the last byte of out */
-void Camellia_cfbr_encrypt_block(const unsigned char *in,unsigned char *out,
-	const int nbits,const CAMELLIA_KEY *key,
-	unsigned char *ivec,const int enc)
-	{
-	int n,rem,num;
-	unsigned char ovec[CAMELLIA_BLOCK_SIZE*2];
-
-	if (nbits<=0 || nbits>128) return;
-
-	/* fill in the first half of the new IV with the current IV */
-	memcpy(ovec,ivec,CAMELLIA_BLOCK_SIZE);
-	/* construct the new IV */
-	Camellia_encrypt(ivec,ivec,key);
-	num = (nbits+7)/8;
-	if (enc)	/* encrypt the input */
-		for(n=0 ; n < num ; ++n)
-			out[n] = (ovec[CAMELLIA_BLOCK_SIZE+n] = in[n] ^ ivec[n]);
-	else		/* decrypt the input */
-		for(n=0 ; n < num ; ++n)
-			out[n] = (ovec[CAMELLIA_BLOCK_SIZE+n] = in[n]) ^ ivec[n];
-	/* shift ovec left... */
-	rem = nbits%8;
-	num = nbits/8;
-	if(rem==0)
-		memcpy(ivec,ovec+num,CAMELLIA_BLOCK_SIZE);
-	else
-		for(n=0 ; n < CAMELLIA_BLOCK_SIZE ; ++n)
-			ivec[n] = ovec[n+num]<<rem | ovec[n+num+1]>>(8-rem);
-
-	/* it is not necessary to cleanse ovec, since the IV is not secret */
-	}
-
-/* N.B. This expects the input to be packed, MS bit first */
-void Camellia_cfb1_encrypt(const unsigned char *in, unsigned char *out,
-	const unsigned long length, const CAMELLIA_KEY *key,
-	unsigned char *ivec, int *num, const int enc)
-	{
-	unsigned int n;
-	unsigned char c[1],d[1];
-
-	assert(in && out && key && ivec && num);
-	assert(*num == 0);
-
-	memset(out,0,(length+7)/8);
-	for(n=0 ; n < length ; ++n)
-		{
-		c[0]=(in[n/8]&(1 << (7-n%8))) ? 0x80 : 0;
-		Camellia_cfbr_encrypt_block(c,d,1,key,ivec,enc);
-		out[n/8]=(out[n/8]&~(1 << (7-n%8)))|((d[0]&0x80) >> (n%8));
-		}
-	}
-
-void Camellia_cfb8_encrypt(const unsigned char *in, unsigned char *out,
-	const unsigned long length, const CAMELLIA_KEY *key,
-	unsigned char *ivec, int *num, const int enc)
-	{
-	unsigned int n;
-
-	assert(in && out && key && ivec && num);
-	assert(*num == 0);
-
-	for(n=0 ; n < length ; ++n)
-		Camellia_cfbr_encrypt_block(&in[n],&out[n],8,key,ivec,enc);
-	}
-
diff --git a/crypto/openssl/crypto/camellia/cmll_ctr.c b/crypto/openssl/crypto/camellia/cmll_ctr.c
deleted file mode 100644
index cc21b70890db..000000000000
--- a/crypto/openssl/crypto/camellia/cmll_ctr.c
+++ /dev/null
@@ -1,143 +0,0 @@
-/* crypto/camellia/camellia_ctr.c -*- mode:C; c-file-style: "eay" -*- */
-/* ====================================================================
- * Copyright (c) 2006 The OpenSSL Project.  All rights reserved.
- *
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions
- * are met:
- *
- * 1. Redistributions of source code must retain the above copyright
- *    notice, this list of conditions and the following disclaimer. 
- *
- * 2. Redistributions in binary form must reproduce the above copyright
- *    notice, this list of conditions and the following disclaimer in
- *    the documentation and/or other materials provided with the
- *    distribution.
- *
- * 3. All advertising materials mentioning features or use of this
- *    software must display the following acknowledgment:
- *    "This product includes software developed by the OpenSSL Project
- *    for use in the OpenSSL Toolkit. (http://www.openssl.org/)"
- *
- * 4. The names "OpenSSL Toolkit" and "OpenSSL Project" must not be used to
- *    endorse or promote products derived from this software without
- *    prior written permission. For written permission, please contact
- *    openssl-core@openssl.org.
- *
- * 5. Products derived from this software may not be called "OpenSSL"
- *    nor may "OpenSSL" appear in their names without prior written
- *    permission of the OpenSSL Project.
- *
- * 6. Redistributions of any form whatsoever must retain the following
- *    acknowledgment:
- *    "This product includes software developed by the OpenSSL Project
- *    for use in the OpenSSL Toolkit (http://www.openssl.org/)"
- *
- * THIS SOFTWARE IS PROVIDED BY THE OpenSSL PROJECT ``AS IS'' AND ANY
- * EXPRESSED OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
- * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR
- * PURPOSE ARE DISCLAIMED.  IN NO EVENT SHALL THE OpenSSL PROJECT OR
- * ITS CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
- * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
- * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
- * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
- * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
- * STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
- * ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED
- * OF THE POSSIBILITY OF SUCH DAMAGE.
- * ====================================================================
- *
- */
-
-#ifndef CAMELLIA_DEBUG
-# ifndef NDEBUG
-#  define NDEBUG
-# endif
-#endif
-#include <assert.h>
-
-#include <openssl/camellia.h>
-#include "cmll_locl.h"
-
-/* NOTE: the IV/counter CTR mode is big-endian.  The rest of the Camellia code
- * is endian-neutral. */
-/* increment counter (128-bit int) by 1 */
-static void Camellia_ctr128_inc(unsigned char *counter) 
-	{
-	unsigned long c;
-
-	/* Grab bottom dword of counter and increment */
-	c = GETU32(counter + 12);
-	c++;	c &= 0xFFFFFFFF;
-	PUTU32(counter + 12, c);
-
-	/* if no overflow, we're done */
-	if (c)
-		return;
-
-	/* Grab 1st dword of counter and increment */
-	c = GETU32(counter +  8);
-	c++;	c &= 0xFFFFFFFF;
-	PUTU32(counter +  8, c);
-
-	/* if no overflow, we're done */
-	if (c)
-		return;
-
-	/* Grab 2nd dword of counter and increment */
-	c = GETU32(counter +  4);
-	c++;	c &= 0xFFFFFFFF;
-	PUTU32(counter +  4, c);
-
-	/* if no overflow, we're done */
-	if (c)
-		return;
-
-	/* Grab top dword of counter and increment */
-	c = GETU32(counter +  0);
-	c++;	c &= 0xFFFFFFFF;
-	PUTU32(counter +  0, c);
-	}
-
-/* The input encrypted as though 128bit counter mode is being
- * used.  The extra state information to record how much of the
- * 128bit block we have used is contained in *num, and the
- * encrypted counter is kept in ecount_buf.  Both *num and
- * ecount_buf must be initialised with zeros before the first
- * call to Camellia_ctr128_encrypt().
- *
- * This algorithm assumes that the counter is in the x lower bits
- * of the IV (ivec), and that the application has full control over
- * overflow and the rest of the IV.  This implementation takes NO
- * responsability for checking that the counter doesn't overflow
- * into the rest of the IV when incremented.
- */
-void Camellia_ctr128_encrypt(const unsigned char *in, unsigned char *out,
-	const unsigned long length, const CAMELLIA_KEY *key,
-	unsigned char ivec[CAMELLIA_BLOCK_SIZE],
-	unsigned char ecount_buf[CAMELLIA_BLOCK_SIZE],
-	unsigned int *num) 
-	{
-
-	unsigned int n;
-	unsigned long l=length;
-
-	assert(in && out && key && counter && num);
-	assert(*num < CAMELLIA_BLOCK_SIZE);
-
-	n = *num;
-
-	while (l--) 
-		{
-		if (n == 0) 
-			{
-			Camellia_encrypt(ivec, ecount_buf, key);
-			Camellia_ctr128_inc(ivec);
-			}
-		*(out++) = *(in++) ^ ecount_buf[n];
-		n = (n+1) % CAMELLIA_BLOCK_SIZE;
-		}
-
-	*num=n;
-	}
-
diff --git a/crypto/openssl/crypto/camellia/cmll_ecb.c b/crypto/openssl/crypto/camellia/cmll_ecb.c
deleted file mode 100644
index 70dc0e5632fb..000000000000
--- a/crypto/openssl/crypto/camellia/cmll_ecb.c
+++ /dev/null
@@ -1,74 +0,0 @@
-/* crypto/camellia/camellia_ecb.c -*- mode:C; c-file-style: "eay" -*- */
-/* ====================================================================
- * Copyright (c) 2006 The OpenSSL Project.  All rights reserved.
- *
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions
- * are met:
- *
- * 1. Redistributions of source code must retain the above copyright
- *    notice, this list of conditions and the following disclaimer. 
- *
- * 2. Redistributions in binary form must reproduce the above copyright
- *    notice, this list of conditions and the following disclaimer in
- *    the documentation and/or other materials provided with the
- *    distribution.
- *
- * 3. All advertising materials mentioning features or use of this
- *    software must display the following acknowledgment:
- *    "This product includes software developed by the OpenSSL Project
- *    for use in the OpenSSL Toolkit. (http://www.openssl.org/)"
- *
- * 4. The names "OpenSSL Toolkit" and "OpenSSL Project" must not be used to
- *    endorse or promote products derived from this software without
- *    prior written permission. For written permission, please contact
- *    openssl-core@openssl.org.
- *
- * 5. Products derived from this software may not be called "OpenSSL"
- *    nor may "OpenSSL" appear in their names without prior written
- *    permission of the OpenSSL Project.
- *
- * 6. Redistributions of any form whatsoever must retain the following
- *    acknowledgment:
- *    "This product includes software developed by the OpenSSL Project
- *    for use in the OpenSSL Toolkit (http://www.openssl.org/)"
- *
- * THIS SOFTWARE IS PROVIDED BY THE OpenSSL PROJECT ``AS IS'' AND ANY
- * EXPRESSED OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
- * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR
- * PURPOSE ARE DISCLAIMED.  IN NO EVENT SHALL THE OpenSSL PROJECT OR
- * ITS CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
- * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
- * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
- * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
- * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
- * STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
- * ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED
- * OF THE POSSIBILITY OF SUCH DAMAGE.
- * ====================================================================
- *
- */
-
-#ifndef CAMELLIA_DEBUG
-# ifndef NDEBUG
-#  define NDEBUG
-# endif
-#endif
-#include <assert.h>
-
-#include <openssl/camellia.h>
-#include "cmll_locl.h"
-
-void Camellia_ecb_encrypt(const unsigned char *in, unsigned char *out,
-	const CAMELLIA_KEY *key, const int enc) 
-	{
-
-	assert(in && out && key);
-	assert((CAMELLIA_ENCRYPT == enc)||(CAMELLIA_DECRYPT == enc));
-
-	if (CAMELLIA_ENCRYPT == enc)
-		Camellia_encrypt(in, out, key);
-	else
-		Camellia_decrypt(in, out, key);
-	}
-
diff --git a/crypto/openssl/crypto/camellia/cmll_locl.h b/crypto/openssl/crypto/camellia/cmll_locl.h
deleted file mode 100644
index 2ac2e9543571..000000000000
--- a/crypto/openssl/crypto/camellia/cmll_locl.h
+++ /dev/null
@@ -1,165 +0,0 @@
-/* crypto/camellia/camellia_locl.h -*- mode:C; c-file-style: "eay" -*- */
-/* ====================================================================
- * Copyright 2006 NTT (Nippon Telegraph and Telephone Corporation) . 
- * ALL RIGHTS RESERVED.
- *
- * Intellectual Property information for Camellia:
- *     http://info.isl.ntt.co.jp/crypt/eng/info/chiteki.html
- *
- * News Release for Announcement of Camellia open source:
- *     http://www.ntt.co.jp/news/news06e/0604/060413a.html
- *
- * The Camellia Code included herein is developed by
- * NTT (Nippon Telegraph and Telephone Corporation), and is contributed
- * to the OpenSSL project.
- *
- * The Camellia Code is licensed pursuant to the OpenSSL open source
- * license provided below.
- */
-/* ====================================================================
- * Copyright (c) 2006 The OpenSSL Project.  All rights reserved.
- *
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions
- * are met:
- *
- * 1. Redistributions of source code must retain the above copyright
- *    notice, this list of conditions and the following disclaimer. 
- *
- * 2. Redistributions in binary form must reproduce the above copyright
- *    notice, this list of conditions and the following disclaimer in
- *    the documentation and/or other materials provided with the
- *    distribution.
- *
- * 3. All advertising materials mentioning features or use of this
- *    software must display the following acknowledgment:
- *    "This product includes software developed by the OpenSSL Project
- *    for use in the OpenSSL Toolkit. (http://www.openssl.org/)"
- *
- * 4. The names "OpenSSL Toolkit" and "OpenSSL Project" must not be used to
- *    endorse or promote products derived from this software without
- *    prior written permission. For written permission, please contact
- *    openssl-core@openssl.org.
- *
- * 5. Products derived from this software may not be called "OpenSSL"
- *    nor may "OpenSSL" appear in their names without prior written
- *    permission of the OpenSSL Project.
- *
- * 6. Redistributions of any form whatsoever must retain the following
- *    acknowledgment:
- *    "This product includes software developed by the OpenSSL Project
- *    for use in the OpenSSL Toolkit (http://www.openssl.org/)"
- *
- * THIS SOFTWARE IS PROVIDED BY THE OpenSSL PROJECT ``AS IS'' AND ANY
- * EXPRESSED OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
- * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR
- * PURPOSE ARE DISCLAIMED.  IN NO EVENT SHALL THE OpenSSL PROJECT OR
- * ITS CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
- * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
- * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
- * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
- * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
- * STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
- * ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED
- * OF THE POSSIBILITY OF SUCH DAMAGE.
- * ====================================================================
- */
-
-#ifndef HEADER_CAMELLIA_LOCL_H
-#define HEADER_CAMELLIA_LOCL_H
-
-#include "openssl/e_os2.h"
-#include <stdio.h>
-#include <stdlib.h>
-#include <string.h>
-
-typedef unsigned char u8;
-typedef unsigned int u32;
-
-#ifdef __cplusplus
-extern "C" {
-#endif
-
-#if defined(_MSC_VER) && (defined(_M_IX86) || defined(_M_AMD64) || defined(_M_X64))
-# define SWAP(x) ( _lrotl(x, 8) & 0x00ff00ff | _lrotr(x, 8) & 0xff00ff00 )
-# define GETU32(p) SWAP(*((u32 *)(p)))
-# define PUTU32(ct, st) { *((u32 *)(ct)) = SWAP((st)); }
-# define CAMELLIA_SWAP4(x) (x = ( _lrotl(x, 8) & 0x00ff00ff | _lrotr(x, 8) & 0xff00ff00) )
-
-#else /* not windows */
-# define GETU32(pt) (((u32)(pt)[0] << 24) \
-	^ ((u32)(pt)[1] << 16) \
-	^ ((u32)(pt)[2] <<  8) \
-	^ ((u32)(pt)[3]))
-
-# define PUTU32(ct, st) { (ct)[0] = (u8)((st) >> 24); \
-	(ct)[1] = (u8)((st) >> 16); \
-	(ct)[2] = (u8)((st) >>  8); \
-	(ct)[3] = (u8)(st); }
-
-#if (defined (__GNUC__) && (defined(__x86_64__) || defined(__x86_64)))
-#define CAMELLIA_SWAP4(x) \
-  do{\
-    asm("bswap %1" : "+r" (x));\
-  }while(0)
-#else
-#define CAMELLIA_SWAP4(x) \
-   do{\
-     x = ((u32)x << 16) + ((u32)x >> 16);\
-     x = (((u32)x & 0xff00ff) << 8) + (((u32)x >> 8) & 0xff00ff);\
-   } while(0)
-#endif
-#endif
-
-#define COPY4WORD(dst, src)	 \
-	     do			 \
-		     {		 \
-		     (dst)[0]=(src)[0];		\
-		     (dst)[1]=(src)[1];		\
-		     (dst)[2]=(src)[2];		\
-		     (dst)[3]=(src)[3];		\
-		     }while(0)
-
-#define SWAP4WORD(word)				\
-   do						\
-	   {					\
-	   CAMELLIA_SWAP4((word)[0]);			\
-	   CAMELLIA_SWAP4((word)[1]);			\
-	   CAMELLIA_SWAP4((word)[2]);			\
-	   CAMELLIA_SWAP4((word)[3]);			\
-	   }while(0)
-
-#define XOR4WORD(a, b)/* a = a ^ b */		\
-   do						\
-	{					\
-	(a)[0]^=(b)[0];				\
-	(a)[1]^=(b)[1];				\
-	(a)[2]^=(b)[2];				\
-	(a)[3]^=(b)[3];				\
-	}while(0)
-
-#define XOR4WORD2(a, b, c)/* a = b ^ c */	\
-   do						\
-	{					\
-	(a)[0]=(b)[0]^(c)[0];			\
-	(a)[1]=(b)[1]^(c)[1];				\
-	(a)[2]=(b)[2]^(c)[2];				\
-	(a)[3]=(b)[3]^(c)[3];				\
-	}while(0)
-
-
-void camellia_setup128(const u8 *key, u32 *subkey);
-void camellia_setup192(const u8 *key, u32 *subkey);
-void camellia_setup256(const u8 *key, u32 *subkey);
-
-void camellia_encrypt128(const u32 *subkey, u32 *io);
-void camellia_decrypt128(const u32 *subkey, u32 *io);
-void camellia_encrypt256(const u32 *subkey, u32 *io);
-void camellia_decrypt256(const u32 *subkey, u32 *io);
-
-#ifdef __cplusplus
-}
-#endif
-
-#endif /* #ifndef HEADER_CAMELLIA_LOCL_H */
-
diff --git a/crypto/openssl/crypto/camellia/cmll_misc.c b/crypto/openssl/crypto/camellia/cmll_misc.c
deleted file mode 100644
index f1047b54e03b..000000000000
--- a/crypto/openssl/crypto/camellia/cmll_misc.c
+++ /dev/null
@@ -1,116 +0,0 @@
-/* crypto/camellia/camellia_misc.c -*- mode:C; c-file-style: "eay" -*- */
-/* ====================================================================
- * Copyright (c) 2006 The OpenSSL Project.  All rights reserved.
- *
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions
- * are met:
- *
- * 1. Redistributions of source code must retain the above copyright
- *    notice, this list of conditions and the following disclaimer. 
- *
- * 2. Redistributions in binary form must reproduce the above copyright
- *    notice, this list of conditions and the following disclaimer in
- *    the documentation and/or other materials provided with the
- *    distribution.
- *
- * 3. All advertising materials mentioning features or use of this
- *    software must display the following acknowledgment:
- *    "This product includes software developed by the OpenSSL Project
- *    for use in the OpenSSL Toolkit. (http://www.openssl.org/)"
- *
- * 4. The names "OpenSSL Toolkit" and "OpenSSL Project" must not be used to
- *    endorse or promote products derived from this software without
- *    prior written permission. For written permission, please contact
- *    openssl-core@openssl.org.
- *
- * 5. Products derived from this software may not be called "OpenSSL"
- *    nor may "OpenSSL" appear in their names without prior written
- *    permission of the OpenSSL Project.
- *
- * 6. Redistributions of any form whatsoever must retain the following
- *    acknowledgment:
- *    "This product includes software developed by the OpenSSL Project
- *    for use in the OpenSSL Toolkit (http://www.openssl.org/)"
- *
- * THIS SOFTWARE IS PROVIDED BY THE OpenSSL PROJECT ``AS IS'' AND ANY
- * EXPRESSED OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
- * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR
- * PURPOSE ARE DISCLAIMED.  IN NO EVENT SHALL THE OpenSSL PROJECT OR
- * ITS CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
- * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
- * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
- * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
- * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
- * STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
- * ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED
- * OF THE POSSIBILITY OF SUCH DAMAGE.
- * ====================================================================
- *
- */
- 
-#include <openssl/opensslv.h>
-#include <openssl/camellia.h>
-#include "cmll_locl.h"
-
-const char CAMELLIA_version[]="CAMELLIA" OPENSSL_VERSION_PTEXT;
-
-int Camellia_set_key(const unsigned char *userKey, const int bits,
-	CAMELLIA_KEY *key)
-	{
-	if (!userKey || !key)
-		{
-		return -1;
-		}
-	
-	switch(bits)
-		{
-	case 128:
-		camellia_setup128(userKey, (unsigned int *)key->rd_key);
-		key->enc = camellia_encrypt128;
-		key->dec = camellia_decrypt128;
-		break;
-	case 192:
-		camellia_setup192(userKey, (unsigned int *)key->rd_key);
-		key->enc = camellia_encrypt256;
-		key->dec = camellia_decrypt256;
-		break;
-	case 256:
-		camellia_setup256(userKey, (unsigned int *)key->rd_key);
-		key->enc = camellia_encrypt256;
-		key->dec = camellia_decrypt256;
-		break;
-	default:
-		return -2;
-		}
-	
-	key->bitLength = bits;
-	return 0;
-	}
-
-void Camellia_encrypt(const unsigned char *in, unsigned char *out,
-	const CAMELLIA_KEY *key)
-	{
-	u32 tmp[CAMELLIA_BLOCK_SIZE/sizeof(u32)];
-	const union { long one; char little; } camellia_endian = {1};
-
-	memcpy(tmp, in, CAMELLIA_BLOCK_SIZE);
-	if (camellia_endian.little) SWAP4WORD(tmp);
-	key->enc(key->rd_key, tmp);
-	if (camellia_endian.little) SWAP4WORD(tmp);
-	memcpy(out, tmp, CAMELLIA_BLOCK_SIZE);
-	}
-
-void Camellia_decrypt(const unsigned char *in, unsigned char *out,
-	const CAMELLIA_KEY *key)
-	{
-	u32 tmp[CAMELLIA_BLOCK_SIZE/sizeof(u32)];
-	const union { long one; char little; } camellia_endian = {1};
-
-	memcpy(tmp, in, CAMELLIA_BLOCK_SIZE);
-	if (camellia_endian.little) SWAP4WORD(tmp);
-	key->dec(key->rd_key, tmp);
-	if (camellia_endian.little) SWAP4WORD(tmp);
-	memcpy(out, tmp, CAMELLIA_BLOCK_SIZE);
-	}
-
diff --git a/crypto/openssl/crypto/camellia/cmll_ofb.c b/crypto/openssl/crypto/camellia/cmll_ofb.c
deleted file mode 100644
index d89cf9f3b324..000000000000
--- a/crypto/openssl/crypto/camellia/cmll_ofb.c
+++ /dev/null
@@ -1,141 +0,0 @@
-/* crypto/camellia/camellia_ofb.c -*- mode:C; c-file-style: "eay" -*- */
-/* ====================================================================
- * Copyright (c) 2006 The OpenSSL Project.  All rights reserved.
- *
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions
- * are met:
- *
- * 1. Redistributions of source code must retain the above copyright
- *    notice, this list of conditions and the following disclaimer. 
- *
- * 2. Redistributions in binary form must reproduce the above copyright
- *    notice, this list of conditions and the following disclaimer in
- *    the documentation and/or other materials provided with the
- *    distribution.
- *
- * 3. All advertising materials mentioning features or use of this
- *    software must display the following acknowledgment:
- *    "This product includes software developed by the OpenSSL Project
- *    for use in the OpenSSL Toolkit. (http://www.openssl.org/)"
- *
- * 4. The names "OpenSSL Toolkit" and "OpenSSL Project" must not be used to
- *    endorse or promote products derived from this software without
- *    prior written permission. For written permission, please contact
- *    openssl-core@openssl.org.
- *
- * 5. Products derived from this software may not be called "OpenSSL"
- *    nor may "OpenSSL" appear in their names without prior written
- *    permission of the OpenSSL Project.
- *
- * 6. Redistributions of any form whatsoever must retain the following
- *    acknowledgment:
- *    "This product includes software developed by the OpenSSL Project
- *    for use in the OpenSSL Toolkit (http://www.openssl.org/)"
- *
- * THIS SOFTWARE IS PROVIDED BY THE OpenSSL PROJECT ``AS IS'' AND ANY
- * EXPRESSED OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
- * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR
- * PURPOSE ARE DISCLAIMED.  IN NO EVENT SHALL THE OpenSSL PROJECT OR
- * ITS CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
- * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
- * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
- * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
- * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
- * STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
- * ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED
- * OF THE POSSIBILITY OF SUCH DAMAGE.
- * ====================================================================
- *
- */
-/* Copyright (C) 1995-1998 Eric Young (eay@cryptsoft.com)
- * All rights reserved.
- *
- * This package is an SSL implementation written
- * by Eric Young (eay@cryptsoft.com).
- * The implementation was written so as to conform with Netscapes SSL.
- * 
- * This library is free for commercial and non-commercial use as long as
- * the following conditions are aheared to.  The following conditions
- * apply to all code found in this distribution, be it the RC4, RSA,
- * lhash, DES, etc., code; not just the SSL code.  The SSL documentation
- * included with this distribution is covered by the same copyright terms
- * except that the holder is Tim Hudson (tjh@cryptsoft.com).
- * 
- * Copyright remains Eric Young's, and as such any Copyright notices in
- * the code are not to be removed.
- * If this package is used in a product, Eric Young should be given attribution
- * as the author of the parts of the library used.
- * This can be in the form of a textual message at program startup or
- * in documentation (online or textual) provided with the package.
- * 
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions
- * are met:
- * 1. Redistributions of source code must retain the copyright
- *    notice, this list of conditions and the following disclaimer.
- * 2. Redistributions in binary form must reproduce the above copyright
- *    notice, this list of conditions and the following disclaimer in the
- *    documentation and/or other materials provided with the distribution.
- * 3. All advertising materials mentioning features or use of this software
- *    must display the following acknowledgement:
- *    "This product includes cryptographic software written by
- *     Eric Young (eay@cryptsoft.com)"
- *    The word 'cryptographic' can be left out if the rouines from the library
- *    being used are not cryptographic related :-).
- * 4. If you include any Windows specific code (or a derivative thereof) from 
- *    the apps directory (application code) you must include an acknowledgement:
- *    "This product includes software written by Tim Hudson (tjh@cryptsoft.com)"
- * 
- * THIS SOFTWARE IS PROVIDED BY ERIC YOUNG ``AS IS'' AND
- * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
- * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
- * ARE DISCLAIMED.  IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE
- * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
- * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
- * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
- * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
- * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
- * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
- * SUCH DAMAGE.
- * 
- * The licence and distribution terms for any publically available version or
- * derivative of this code cannot be changed.  i.e. this code cannot simply be
- * copied and put under another distribution licence
- * [including the GNU Public Licence.]
- */
-
-#ifndef CAMELLIA_DEBUG
-# ifndef NDEBUG
-#  define NDEBUG
-# endif
-#endif
-#include <assert.h>
-#include <openssl/camellia.h>
-#include "cmll_locl.h"
-
-/* The input and output encrypted as though 128bit ofb mode is being
- * used.  The extra state information to record how much of the
- * 128bit block we have used is contained in *num;
- */
-void Camellia_ofb128_encrypt(const unsigned char *in, unsigned char *out,
-	const unsigned long length, const CAMELLIA_KEY *key,
-	unsigned char *ivec, int *num) {
-
-	unsigned int n;
-	unsigned long l=length;
-
-	assert(in && out && key && ivec && num);
-
-	n = *num;
-
-	while (l--) {
-		if (n == 0) {
-			Camellia_encrypt(ivec, ivec, key);
-		}
-		*(out++) = *(in++) ^ ivec[n];
-		n = (n+1) % CAMELLIA_BLOCK_SIZE;
-	}
-
-	*num=n;
-}
diff --git a/crypto/openssl/crypto/cast/Makefile b/crypto/openssl/crypto/cast/Makefile
deleted file mode 100644
index 149956ee90f5..000000000000
--- a/crypto/openssl/crypto/cast/Makefile
+++ /dev/null
@@ -1,106 +0,0 @@
-#
-# OpenSSL/crypto/cast/Makefile
-#
-
-DIR=	cast
-TOP=	../..
-CC=	cc
-CPP=	$(CC) -E
-INCLUDES=
-CFLAG=-g
-MAKEFILE=	Makefile
-AR=		ar r
-
-CAST_ENC=c_enc.o
-
-CFLAGS= $(INCLUDES) $(CFLAG)
-ASFLAGS= $(INCLUDES) $(ASFLAG)
-AFLAGS= $(ASFLAGS)
-
-GENERAL=Makefile
-TEST=casttest.c
-APPS=
-
-LIB=$(TOP)/libcrypto.a
-LIBSRC=c_skey.c c_ecb.c c_enc.c c_cfb64.c c_ofb64.c 
-LIBOBJ=c_skey.o c_ecb.o $(CAST_ENC) c_cfb64.o c_ofb64.o
-
-SRC= $(LIBSRC)
-
-EXHEADER= cast.h
-HEADER=	cast_s.h cast_lcl.h $(EXHEADER)
-
-ALL=    $(GENERAL) $(SRC) $(HEADER)
-
-top:
-	(cd ../..; $(MAKE) DIRS=crypto SDIRS=$(DIR) sub_all)
-
-all:	lib
-
-lib:	$(LIBOBJ)
-	$(AR) $(LIB) $(LIBOBJ)
-	$(RANLIB) $(LIB) || echo Never mind.
-	@touch lib
-
-# ELF
-cx86-elf.s: asm/cast-586.pl ../perlasm/x86asm.pl ../perlasm/cbc.pl
-	(cd asm; $(PERL) cast-586.pl elf $(CLAGS) $(PROCESSOR) > ../$@)
-# COFF
-cx86-cof.s: asm/cast-586.pl ../perlasm/x86asm.pl ../perlasm/cbc.pl
-	(cd asm; $(PERL) cast-586.pl coff $(CLAGS) $(PROCESSOR) > ../$@)
-# a.out
-cx86-out.s: asm/cast-586.pl ../perlasm/x86asm.pl ../perlasm/cbc.pl
-	(cd asm; $(PERL) cast-586.pl a.out $(CLAGS) $(PROCESSOR) > ../$@)
-
-files:
-	$(PERL) $(TOP)/util/files.pl Makefile >> $(TOP)/MINFO
-
-links:
-	@$(PERL) $(TOP)/util/mklink.pl ../../include/openssl $(EXHEADER)
-	@$(PERL) $(TOP)/util/mklink.pl ../../test $(TEST)
-	@$(PERL) $(TOP)/util/mklink.pl ../../apps $(APPS)
-
-install:
-	@[ -n "$(INSTALLTOP)" ] # should be set by top Makefile...
-	@headerlist="$(EXHEADER)"; for i in $$headerlist ; \
-	do  \
-	(cp $$i $(INSTALL_PREFIX)$(INSTALLTOP)/include/openssl/$$i; \
-	chmod 644 $(INSTALL_PREFIX)$(INSTALLTOP)/include/openssl/$$i ); \
-	done;
-
-tags:
-	ctags $(SRC)
-
-tests:
-
-lint:
-	lint -DLINT $(INCLUDES) $(SRC)>fluff
-
-depend:
-	@[ -n "$(MAKEDEPEND)" ] # should be set by upper Makefile...
-	$(MAKEDEPEND) -- $(CFLAG) $(INCLUDES) $(DEPFLAG) -- $(PROGS) $(LIBSRC)
-
-dclean:
-	$(PERL) -pe 'if (/^# DO NOT DELETE THIS LINE/) {print; exit(0);}' $(MAKEFILE) >Makefile.new
-	mv -f Makefile.new $(MAKEFILE)
-
-clean:
-	rm -f *.s *.o *.obj lib tags core .pure .nfs* *.old *.bak fluff
-
-# DO NOT DELETE THIS LINE -- make depend depends on it.
-
-c_cfb64.o: ../../e_os.h ../../include/openssl/cast.h
-c_cfb64.o: ../../include/openssl/e_os2.h ../../include/openssl/opensslconf.h
-c_cfb64.o: c_cfb64.c cast_lcl.h
-c_ecb.o: ../../e_os.h ../../include/openssl/cast.h
-c_ecb.o: ../../include/openssl/e_os2.h ../../include/openssl/opensslconf.h
-c_ecb.o: ../../include/openssl/opensslv.h c_ecb.c cast_lcl.h
-c_enc.o: ../../e_os.h ../../include/openssl/cast.h
-c_enc.o: ../../include/openssl/e_os2.h ../../include/openssl/opensslconf.h
-c_enc.o: c_enc.c cast_lcl.h
-c_ofb64.o: ../../e_os.h ../../include/openssl/cast.h
-c_ofb64.o: ../../include/openssl/e_os2.h ../../include/openssl/opensslconf.h
-c_ofb64.o: c_ofb64.c cast_lcl.h
-c_skey.o: ../../e_os.h ../../include/openssl/cast.h
-c_skey.o: ../../include/openssl/e_os2.h ../../include/openssl/opensslconf.h
-c_skey.o: c_skey.c cast_lcl.h cast_s.h
diff --git a/crypto/openssl/crypto/cast/asm/cast-586.pl b/crypto/openssl/crypto/cast/asm/cast-586.pl
deleted file mode 100644
index 6be0bfe57245..000000000000
--- a/crypto/openssl/crypto/cast/asm/cast-586.pl
+++ /dev/null
@@ -1,176 +0,0 @@
-#!/usr/local/bin/perl
-
-# define for pentium pro friendly version
-$ppro=1;
-
-push(@INC,"perlasm","../../perlasm");
-require "x86asm.pl";
-require "cbc.pl";
-
-&asm_init($ARGV[0],"cast-586.pl",$ARGV[$#ARGV] eq "386");
-
-$CAST_ROUNDS=16;
-$L="edi";
-$R="esi";
-$K="ebp";
-$tmp1="ecx";
-$tmp2="ebx";
-$tmp3="eax";
-$tmp4="edx";
-$S1="CAST_S_table0";
-$S2="CAST_S_table1";
-$S3="CAST_S_table2";
-$S4="CAST_S_table3";
-
-@F1=("add","xor","sub");
-@F2=("xor","sub","add");
-@F3=("sub","add","xor");
-
-&CAST_encrypt("CAST_encrypt",1);
-&CAST_encrypt("CAST_decrypt",0);
-&cbc("CAST_cbc_encrypt","CAST_encrypt","CAST_decrypt",1,4,5,3,-1,-1);
-
-&asm_finish();
-
-sub CAST_encrypt {
-    local($name,$enc)=@_;
-
-    local($win_ex)=<<"EOF";
-EXTERN	_CAST_S_table0:DWORD
-EXTERN	_CAST_S_table1:DWORD
-EXTERN	_CAST_S_table2:DWORD
-EXTERN	_CAST_S_table3:DWORD
-EOF
-    &main::external_label(
-			  "CAST_S_table0",
-			  "CAST_S_table1",
-			  "CAST_S_table2",
-			  "CAST_S_table3",
-			  );
-
-    &function_begin_B($name,$win_ex);
-
-    &comment("");
-
-    &push("ebp");
-    &push("ebx");
-    &mov($tmp2,&wparam(0));
-    &mov($K,&wparam(1));
-    &push("esi");
-    &push("edi");
-
-    &comment("Load the 2 words");
-    &mov($L,&DWP(0,$tmp2,"",0));
-    &mov($R,&DWP(4,$tmp2,"",0));
-
-    &comment('Get short key flag');
-    &mov($tmp3,&DWP(128,$K,"",0));
-    if($enc) {
-	&push($tmp3);
-    } else {
-	&or($tmp3,$tmp3);
-	&jnz(&label('cast_dec_skip'));
-    }
-
-    &xor($tmp3,	$tmp3);
-
-    # encrypting part
-
-    if ($enc) {
-	&E_CAST( 0,$S,$L,$R,$K,@F1,$tmp1,$tmp2,$tmp3,$tmp4);
-	&E_CAST( 1,$S,$R,$L,$K,@F2,$tmp1,$tmp2,$tmp3,$tmp4);
-	&E_CAST( 2,$S,$L,$R,$K,@F3,$tmp1,$tmp2,$tmp3,$tmp4);
-	&E_CAST( 3,$S,$R,$L,$K,@F1,$tmp1,$tmp2,$tmp3,$tmp4);
-	&E_CAST( 4,$S,$L,$R,$K,@F2,$tmp1,$tmp2,$tmp3,$tmp4);
-	&E_CAST( 5,$S,$R,$L,$K,@F3,$tmp1,$tmp2,$tmp3,$tmp4);
-	&E_CAST( 6,$S,$L,$R,$K,@F1,$tmp1,$tmp2,$tmp3,$tmp4);
-	&E_CAST( 7,$S,$R,$L,$K,@F2,$tmp1,$tmp2,$tmp3,$tmp4);
-	&E_CAST( 8,$S,$L,$R,$K,@F3,$tmp1,$tmp2,$tmp3,$tmp4);
-	&E_CAST( 9,$S,$R,$L,$K,@F1,$tmp1,$tmp2,$tmp3,$tmp4);
-	&E_CAST(10,$S,$L,$R,$K,@F2,$tmp1,$tmp2,$tmp3,$tmp4);
-	&E_CAST(11,$S,$R,$L,$K,@F3,$tmp1,$tmp2,$tmp3,$tmp4);
-	&comment('test short key flag');
-	&pop($tmp4);
-	&or($tmp4,$tmp4);
-	&jnz(&label('cast_enc_done'));
-	&E_CAST(12,$S,$L,$R,$K,@F1,$tmp1,$tmp2,$tmp3,$tmp4);
-	&E_CAST(13,$S,$R,$L,$K,@F2,$tmp1,$tmp2,$tmp3,$tmp4);
-	&E_CAST(14,$S,$L,$R,$K,@F3,$tmp1,$tmp2,$tmp3,$tmp4);
-	&E_CAST(15,$S,$R,$L,$K,@F1,$tmp1,$tmp2,$tmp3,$tmp4);
-    } else {
-	&E_CAST(15,$S,$L,$R,$K,@F1,$tmp1,$tmp2,$tmp3,$tmp4);
-	&E_CAST(14,$S,$R,$L,$K,@F3,$tmp1,$tmp2,$tmp3,$tmp4);
-	&E_CAST(13,$S,$L,$R,$K,@F2,$tmp1,$tmp2,$tmp3,$tmp4);
-	&E_CAST(12,$S,$R,$L,$K,@F1,$tmp1,$tmp2,$tmp3,$tmp4);
-	&set_label('cast_dec_skip');
-	&E_CAST(11,$S,$L,$R,$K,@F3,$tmp1,$tmp2,$tmp3,$tmp4);
-	&E_CAST(10,$S,$R,$L,$K,@F2,$tmp1,$tmp2,$tmp3,$tmp4);
-	&E_CAST( 9,$S,$L,$R,$K,@F1,$tmp1,$tmp2,$tmp3,$tmp4);
-	&E_CAST( 8,$S,$R,$L,$K,@F3,$tmp1,$tmp2,$tmp3,$tmp4);
-	&E_CAST( 7,$S,$L,$R,$K,@F2,$tmp1,$tmp2,$tmp3,$tmp4);
-	&E_CAST( 6,$S,$R,$L,$K,@F1,$tmp1,$tmp2,$tmp3,$tmp4);
-	&E_CAST( 5,$S,$L,$R,$K,@F3,$tmp1,$tmp2,$tmp3,$tmp4);
-	&E_CAST( 4,$S,$R,$L,$K,@F2,$tmp1,$tmp2,$tmp3,$tmp4);
-	&E_CAST( 3,$S,$L,$R,$K,@F1,$tmp1,$tmp2,$tmp3,$tmp4);
-	&E_CAST( 2,$S,$R,$L,$K,@F3,$tmp1,$tmp2,$tmp3,$tmp4);
-	&E_CAST( 1,$S,$L,$R,$K,@F2,$tmp1,$tmp2,$tmp3,$tmp4);
-	&E_CAST( 0,$S,$R,$L,$K,@F1,$tmp1,$tmp2,$tmp3,$tmp4);
-    }
-
-    &set_label('cast_enc_done') if $enc;
-# Why the nop? - Ben 17/1/99
-    &nop();
-    &mov($tmp3,&wparam(0));
-    &mov(&DWP(4,$tmp3,"",0),$L);
-    &mov(&DWP(0,$tmp3,"",0),$R);
-    &function_end($name);
-}
-
-sub E_CAST {
-    local($i,$S,$L,$R,$K,$OP1,$OP2,$OP3,$tmp1,$tmp2,$tmp3,$tmp4)=@_;
-    # Ri needs to have 16 pre added.
-
-    &comment("round $i");
-    &mov(	$tmp4,		&DWP($i*8,$K,"",1));
-
-    &mov(	$tmp1,		&DWP($i*8+4,$K,"",1));
-    &$OP1(	$tmp4,		$R);
-
-    &rotl(	$tmp4,		&LB($tmp1));
-
-    if ($ppro) {
-	&mov(	$tmp2,		$tmp4);		# B
-	&xor(	$tmp1,		$tmp1);
-	
-	&movb(	&LB($tmp1),	&HB($tmp4));	# A
-	&and(	$tmp2,		0xff);
-
-	&shr(	$tmp4,		16); 		#
-	&xor(	$tmp3,		$tmp3);
-    } else {
-	&mov(	$tmp2,		$tmp4);		# B
-	&movb(	&LB($tmp1),	&HB($tmp4));	# A	# BAD BAD BAD
-	
-	&shr(	$tmp4,		16); 		#
-	&and(	$tmp2,		0xff);
-    }
-
-    &movb(	&LB($tmp3),	&HB($tmp4));	# C	# BAD BAD BAD
-    &and(	$tmp4,		0xff);		# D
-
-    &mov(	$tmp1,		&DWP($S1,"",$tmp1,4));
-    &mov(	$tmp2,		&DWP($S2,"",$tmp2,4));
-
-    &$OP2(	$tmp1,		$tmp2);
-    &mov(	$tmp2,		&DWP($S3,"",$tmp3,4));
-
-    &$OP3(	$tmp1,		$tmp2);
-    &mov(	$tmp2,		&DWP($S4,"",$tmp4,4));
-
-    &$OP1(	$tmp1,		$tmp2);
-    # XXX
-
-    &xor(	$L,		$tmp1);
-    # XXX
-}
-
diff --git a/crypto/openssl/crypto/cast/asm/readme b/crypto/openssl/crypto/cast/asm/readme
deleted file mode 100644
index fbcd76289e26..000000000000
--- a/crypto/openssl/crypto/cast/asm/readme
+++ /dev/null
@@ -1,7 +0,0 @@
-There is a ppro flag in cast-586 which turns on/off
-generation of pentium pro/II friendly code
-
-This flag makes the inner loop one cycle longer, but generates 
-code that runs %30 faster on the pentium pro/II, while only %7 slower
-on the pentium.  By default, this flag is on.
-
diff --git a/crypto/openssl/crypto/cast/c_cfb64.c b/crypto/openssl/crypto/cast/c_cfb64.c
deleted file mode 100644
index 514c005c325f..000000000000
--- a/crypto/openssl/crypto/cast/c_cfb64.c
+++ /dev/null
@@ -1,122 +0,0 @@
-/* crypto/cast/c_cfb64.c */
-/* Copyright (C) 1995-1998 Eric Young (eay@cryptsoft.com)
- * All rights reserved.
- *
- * This package is an SSL implementation written
- * by Eric Young (eay@cryptsoft.com).
- * The implementation was written so as to conform with Netscapes SSL.
- * 
- * This library is free for commercial and non-commercial use as long as
- * the following conditions are aheared to.  The following conditions
- * apply to all code found in this distribution, be it the RC4, RSA,
- * lhash, DES, etc., code; not just the SSL code.  The SSL documentation
- * included with this distribution is covered by the same copyright terms
- * except that the holder is Tim Hudson (tjh@cryptsoft.com).
- * 
- * Copyright remains Eric Young's, and as such any Copyright notices in
- * the code are not to be removed.
- * If this package is used in a product, Eric Young should be given attribution
- * as the author of the parts of the library used.
- * This can be in the form of a textual message at program startup or
- * in documentation (online or textual) provided with the package.
- * 
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions
- * are met:
- * 1. Redistributions of source code must retain the copyright
- *    notice, this list of conditions and the following disclaimer.
- * 2. Redistributions in binary form must reproduce the above copyright
- *    notice, this list of conditions and the following disclaimer in the
- *    documentation and/or other materials provided with the distribution.
- * 3. All advertising materials mentioning features or use of this software
- *    must display the following acknowledgement:
- *    "This product includes cryptographic software written by
- *     Eric Young (eay@cryptsoft.com)"
- *    The word 'cryptographic' can be left out if the rouines from the library
- *    being used are not cryptographic related :-).
- * 4. If you include any Windows specific code (or a derivative thereof) from 
- *    the apps directory (application code) you must include an acknowledgement:
- *    "This product includes software written by Tim Hudson (tjh@cryptsoft.com)"
- * 
- * THIS SOFTWARE IS PROVIDED BY ERIC YOUNG ``AS IS'' AND
- * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
- * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
- * ARE DISCLAIMED.  IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE
- * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
- * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
- * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
- * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
- * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
- * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
- * SUCH DAMAGE.
- * 
- * The licence and distribution terms for any publically available version or
- * derivative of this code cannot be changed.  i.e. this code cannot simply be
- * copied and put under another distribution licence
- * [including the GNU Public Licence.]
- */
-
-#include <openssl/cast.h>
-#include "cast_lcl.h"
-
-/* The input and output encrypted as though 64bit cfb mode is being
- * used.  The extra state information to record how much of the
- * 64bit block we have used is contained in *num;
- */
-
-void CAST_cfb64_encrypt(const unsigned char *in, unsigned char *out,
-			long length, CAST_KEY *schedule, unsigned char *ivec,
-			int *num, int enc)
-	{
-	register CAST_LONG v0,v1,t;
-	register int n= *num;
-	register long l=length;
-	CAST_LONG ti[2];
-	unsigned char *iv,c,cc;
-
-	iv=ivec;
-	if (enc)
-		{
-		while (l--)
-			{
-			if (n == 0)
-				{
-				n2l(iv,v0); ti[0]=v0;
-				n2l(iv,v1); ti[1]=v1;
-				CAST_encrypt((CAST_LONG *)ti,schedule);
-				iv=ivec;
-				t=ti[0]; l2n(t,iv);
-				t=ti[1]; l2n(t,iv);
-				iv=ivec;
-				}
-			c= *(in++)^iv[n];
-			*(out++)=c;
-			iv[n]=c;
-			n=(n+1)&0x07;
-			}
-		}
-	else
-		{
-		while (l--)
-			{
-			if (n == 0)
-				{
-				n2l(iv,v0); ti[0]=v0;
-				n2l(iv,v1); ti[1]=v1;
-				CAST_encrypt((CAST_LONG *)ti,schedule);
-				iv=ivec;
-				t=ti[0]; l2n(t,iv);
-				t=ti[1]; l2n(t,iv);
-				iv=ivec;
-				}
-			cc= *(in++);
-			c=iv[n];
-			iv[n]=cc;
-			*(out++)=c^cc;
-			n=(n+1)&0x07;
-			}
-		}
-	v0=v1=ti[0]=ti[1]=t=c=cc=0;
-	*num=n;
-	}
-
diff --git a/crypto/openssl/crypto/cast/c_ecb.c b/crypto/openssl/crypto/cast/c_ecb.c
deleted file mode 100644
index f2dc6062267f..000000000000
--- a/crypto/openssl/crypto/cast/c_ecb.c
+++ /dev/null
@@ -1,80 +0,0 @@
-/* crypto/cast/c_ecb.c */
-/* Copyright (C) 1995-1998 Eric Young (eay@cryptsoft.com)
- * All rights reserved.
- *
- * This package is an SSL implementation written
- * by Eric Young (eay@cryptsoft.com).
- * The implementation was written so as to conform with Netscapes SSL.
- * 
- * This library is free for commercial and non-commercial use as long as
- * the following conditions are aheared to.  The following conditions
- * apply to all code found in this distribution, be it the RC4, RSA,
- * lhash, DES, etc., code; not just the SSL code.  The SSL documentation
- * included with this distribution is covered by the same copyright terms
- * except that the holder is Tim Hudson (tjh@cryptsoft.com).
- * 
- * Copyright remains Eric Young's, and as such any Copyright notices in
- * the code are not to be removed.
- * If this package is used in a product, Eric Young should be given attribution
- * as the author of the parts of the library used.
- * This can be in the form of a textual message at program startup or
- * in documentation (online or textual) provided with the package.
- * 
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions
- * are met:
- * 1. Redistributions of source code must retain the copyright
- *    notice, this list of conditions and the following disclaimer.
- * 2. Redistributions in binary form must reproduce the above copyright
- *    notice, this list of conditions and the following disclaimer in the
- *    documentation and/or other materials provided with the distribution.
- * 3. All advertising materials mentioning features or use of this software
- *    must display the following acknowledgement:
- *    "This product includes cryptographic software written by
- *     Eric Young (eay@cryptsoft.com)"
- *    The word 'cryptographic' can be left out if the rouines from the library
- *    being used are not cryptographic related :-).
- * 4. If you include any Windows specific code (or a derivative thereof) from 
- *    the apps directory (application code) you must include an acknowledgement:
- *    "This product includes software written by Tim Hudson (tjh@cryptsoft.com)"
- * 
- * THIS SOFTWARE IS PROVIDED BY ERIC YOUNG ``AS IS'' AND
- * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
- * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
- * ARE DISCLAIMED.  IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE
- * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
- * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
- * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
- * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
- * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
- * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
- * SUCH DAMAGE.
- * 
- * The licence and distribution terms for any publically available version or
- * derivative of this code cannot be changed.  i.e. this code cannot simply be
- * copied and put under another distribution licence
- * [including the GNU Public Licence.]
- */
-
-#include <openssl/cast.h>
-#include "cast_lcl.h"
-#include <openssl/opensslv.h>
-
-const char CAST_version[]="CAST" OPENSSL_VERSION_PTEXT;
-
-void CAST_ecb_encrypt(const unsigned char *in, unsigned char *out,
-		      CAST_KEY *ks, int enc)
-	{
-	CAST_LONG l,d[2];
-
-	n2l(in,l); d[0]=l;
-	n2l(in,l); d[1]=l;
-	if (enc)
-		CAST_encrypt(d,ks);
-	else
-		CAST_decrypt(d,ks);
-	l=d[0]; l2n(l,out);
-	l=d[1]; l2n(l,out);
-	l=d[0]=d[1]=0;
-	}
-
diff --git a/crypto/openssl/crypto/cast/c_enc.c b/crypto/openssl/crypto/cast/c_enc.c
deleted file mode 100644
index 0fe2cffeccff..000000000000
--- a/crypto/openssl/crypto/cast/c_enc.c
+++ /dev/null
@@ -1,207 +0,0 @@
-/* crypto/cast/c_enc.c */
-/* Copyright (C) 1995-1998 Eric Young (eay@cryptsoft.com)
- * All rights reserved.
- *
- * This package is an SSL implementation written
- * by Eric Young (eay@cryptsoft.com).
- * The implementation was written so as to conform with Netscapes SSL.
- * 
- * This library is free for commercial and non-commercial use as long as
- * the following conditions are aheared to.  The following conditions
- * apply to all code found in this distribution, be it the RC4, RSA,
- * lhash, DES, etc., code; not just the SSL code.  The SSL documentation
- * included with this distribution is covered by the same copyright terms
- * except that the holder is Tim Hudson (tjh@cryptsoft.com).
- * 
- * Copyright remains Eric Young's, and as such any Copyright notices in
- * the code are not to be removed.
- * If this package is used in a product, Eric Young should be given attribution
- * as the author of the parts of the library used.
- * This can be in the form of a textual message at program startup or
- * in documentation (online or textual) provided with the package.
- * 
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions
- * are met:
- * 1. Redistributions of source code must retain the copyright
- *    notice, this list of conditions and the following disclaimer.
- * 2. Redistributions in binary form must reproduce the above copyright
- *    notice, this list of conditions and the following disclaimer in the
- *    documentation and/or other materials provided with the distribution.
- * 3. All advertising materials mentioning features or use of this software
- *    must display the following acknowledgement:
- *    "This product includes cryptographic software written by
- *     Eric Young (eay@cryptsoft.com)"
- *    The word 'cryptographic' can be left out if the rouines from the library
- *    being used are not cryptographic related :-).
- * 4. If you include any Windows specific code (or a derivative thereof) from 
- *    the apps directory (application code) you must include an acknowledgement:
- *    "This product includes software written by Tim Hudson (tjh@cryptsoft.com)"
- * 
- * THIS SOFTWARE IS PROVIDED BY ERIC YOUNG ``AS IS'' AND
- * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
- * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
- * ARE DISCLAIMED.  IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE
- * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
- * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
- * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
- * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
- * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
- * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
- * SUCH DAMAGE.
- * 
- * The licence and distribution terms for any publically available version or
- * derivative of this code cannot be changed.  i.e. this code cannot simply be
- * copied and put under another distribution licence
- * [including the GNU Public Licence.]
- */
-
-#include <openssl/cast.h>
-#include "cast_lcl.h"
-
-void CAST_encrypt(CAST_LONG *data, CAST_KEY *key)
-	{
-	register CAST_LONG l,r,*k,t;
-
-	k= &(key->data[0]);
-	l=data[0];
-	r=data[1];
-
-	E_CAST( 0,k,l,r,+,^,-);
-	E_CAST( 1,k,r,l,^,-,+);
-	E_CAST( 2,k,l,r,-,+,^);
-	E_CAST( 3,k,r,l,+,^,-);
-	E_CAST( 4,k,l,r,^,-,+);
-	E_CAST( 5,k,r,l,-,+,^);
-	E_CAST( 6,k,l,r,+,^,-);
-	E_CAST( 7,k,r,l,^,-,+);
-	E_CAST( 8,k,l,r,-,+,^);
-	E_CAST( 9,k,r,l,+,^,-);
-	E_CAST(10,k,l,r,^,-,+);
-	E_CAST(11,k,r,l,-,+,^);
-	if(!key->short_key)
-	    {
-	    E_CAST(12,k,l,r,+,^,-);
-	    E_CAST(13,k,r,l,^,-,+);
-	    E_CAST(14,k,l,r,-,+,^);
-	    E_CAST(15,k,r,l,+,^,-);
-	    }
-
-	data[1]=l&0xffffffffL;
-	data[0]=r&0xffffffffL;
-	}
-
-void CAST_decrypt(CAST_LONG *data, CAST_KEY *key)
-	{
-	register CAST_LONG l,r,*k,t;
-
-	k= &(key->data[0]);
-	l=data[0];
-	r=data[1];
-
-	if(!key->short_key)
-	    {
-	    E_CAST(15,k,l,r,+,^,-);
-	    E_CAST(14,k,r,l,-,+,^);
-	    E_CAST(13,k,l,r,^,-,+);
-	    E_CAST(12,k,r,l,+,^,-);
-	    }
-	E_CAST(11,k,l,r,-,+,^);
-	E_CAST(10,k,r,l,^,-,+);
-	E_CAST( 9,k,l,r,+,^,-);
-	E_CAST( 8,k,r,l,-,+,^);
-	E_CAST( 7,k,l,r,^,-,+);
-	E_CAST( 6,k,r,l,+,^,-);
-	E_CAST( 5,k,l,r,-,+,^);
-	E_CAST( 4,k,r,l,^,-,+);
-	E_CAST( 3,k,l,r,+,^,-);
-	E_CAST( 2,k,r,l,-,+,^);
-	E_CAST( 1,k,l,r,^,-,+);
-	E_CAST( 0,k,r,l,+,^,-);
-
-	data[1]=l&0xffffffffL;
-	data[0]=r&0xffffffffL;
-	}
-
-void CAST_cbc_encrypt(const unsigned char *in, unsigned char *out, long length,
-	     CAST_KEY *ks, unsigned char *iv, int enc)
-	{
-	register CAST_LONG tin0,tin1;
-	register CAST_LONG tout0,tout1,xor0,xor1;
-	register long l=length;
-	CAST_LONG tin[2];
-
-	if (enc)
-		{
-		n2l(iv,tout0);
-		n2l(iv,tout1);
-		iv-=8;
-		for (l-=8; l>=0; l-=8)
-			{
-			n2l(in,tin0);
-			n2l(in,tin1);
-			tin0^=tout0;
-			tin1^=tout1;
-			tin[0]=tin0;
-			tin[1]=tin1;
-			CAST_encrypt(tin,ks);
-			tout0=tin[0];
-			tout1=tin[1];
-			l2n(tout0,out);
-			l2n(tout1,out);
-			}
-		if (l != -8)
-			{
-			n2ln(in,tin0,tin1,l+8);
-			tin0^=tout0;
-			tin1^=tout1;
-			tin[0]=tin0;
-			tin[1]=tin1;
-			CAST_encrypt(tin,ks);
-			tout0=tin[0];
-			tout1=tin[1];
-			l2n(tout0,out);
-			l2n(tout1,out);
-			}
-		l2n(tout0,iv);
-		l2n(tout1,iv);
-		}
-	else
-		{
-		n2l(iv,xor0);
-		n2l(iv,xor1);
-		iv-=8;
-		for (l-=8; l>=0; l-=8)
-			{
-			n2l(in,tin0);
-			n2l(in,tin1);
-			tin[0]=tin0;
-			tin[1]=tin1;
-			CAST_decrypt(tin,ks);
-			tout0=tin[0]^xor0;
-			tout1=tin[1]^xor1;
-			l2n(tout0,out);
-			l2n(tout1,out);
-			xor0=tin0;
-			xor1=tin1;
-			}
-		if (l != -8)
-			{
-			n2l(in,tin0);
-			n2l(in,tin1);
-			tin[0]=tin0;
-			tin[1]=tin1;
-			CAST_decrypt(tin,ks);
-			tout0=tin[0]^xor0;
-			tout1=tin[1]^xor1;
-			l2nn(tout0,tout1,out,l+8);
-			xor0=tin0;
-			xor1=tin1;
-			}
-		l2n(xor0,iv);
-		l2n(xor1,iv);
-		}
-	tin0=tin1=tout0=tout1=xor0=xor1=0;
-	tin[0]=tin[1]=0;
-	}
-
diff --git a/crypto/openssl/crypto/cast/c_ofb64.c b/crypto/openssl/crypto/cast/c_ofb64.c
deleted file mode 100644
index fd0469a62faa..000000000000
--- a/crypto/openssl/crypto/cast/c_ofb64.c
+++ /dev/null
@@ -1,111 +0,0 @@
-/* crypto/cast/c_ofb64.c */
-/* Copyright (C) 1995-1998 Eric Young (eay@cryptsoft.com)
- * All rights reserved.
- *
- * This package is an SSL implementation written
- * by Eric Young (eay@cryptsoft.com).
- * The implementation was written so as to conform with Netscapes SSL.
- * 
- * This library is free for commercial and non-commercial use as long as
- * the following conditions are aheared to.  The following conditions
- * apply to all code found in this distribution, be it the RC4, RSA,
- * lhash, DES, etc., code; not just the SSL code.  The SSL documentation
- * included with this distribution is covered by the same copyright terms
- * except that the holder is Tim Hudson (tjh@cryptsoft.com).
- * 
- * Copyright remains Eric Young's, and as such any Copyright notices in
- * the code are not to be removed.
- * If this package is used in a product, Eric Young should be given attribution
- * as the author of the parts of the library used.
- * This can be in the form of a textual message at program startup or
- * in documentation (online or textual) provided with the package.
- * 
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions
- * are met:
- * 1. Redistributions of source code must retain the copyright
- *    notice, this list of conditions and the following disclaimer.
- * 2. Redistributions in binary form must reproduce the above copyright
- *    notice, this list of conditions and the following disclaimer in the
- *    documentation and/or other materials provided with the distribution.
- * 3. All advertising materials mentioning features or use of this software
- *    must display the following acknowledgement:
- *    "This product includes cryptographic software written by
- *     Eric Young (eay@cryptsoft.com)"
- *    The word 'cryptographic' can be left out if the rouines from the library
- *    being used are not cryptographic related :-).
- * 4. If you include any Windows specific code (or a derivative thereof) from 
- *    the apps directory (application code) you must include an acknowledgement:
- *    "This product includes software written by Tim Hudson (tjh@cryptsoft.com)"
- * 
- * THIS SOFTWARE IS PROVIDED BY ERIC YOUNG ``AS IS'' AND
- * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
- * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
- * ARE DISCLAIMED.  IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE
- * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
- * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
- * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
- * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
- * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
- * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
- * SUCH DAMAGE.
- * 
- * The licence and distribution terms for any publically available version or
- * derivative of this code cannot be changed.  i.e. this code cannot simply be
- * copied and put under another distribution licence
- * [including the GNU Public Licence.]
- */
-
-#include <openssl/cast.h>
-#include "cast_lcl.h"
-
-/* The input and output encrypted as though 64bit ofb mode is being
- * used.  The extra state information to record how much of the
- * 64bit block we have used is contained in *num;
- */
-void CAST_ofb64_encrypt(const unsigned char *in, unsigned char *out,
-			long length, CAST_KEY *schedule, unsigned char *ivec,
-			int *num)
-	{
-	register CAST_LONG v0,v1,t;
-	register int n= *num;
-	register long l=length;
-	unsigned char d[8];
-	register char *dp;
-	CAST_LONG ti[2];
-	unsigned char *iv;
-	int save=0;
-
-	iv=ivec;
-	n2l(iv,v0);
-	n2l(iv,v1);
-	ti[0]=v0;
-	ti[1]=v1;
-	dp=(char *)d;
-	l2n(v0,dp);
-	l2n(v1,dp);
-	while (l--)
-		{
-		if (n == 0)
-			{
-			CAST_encrypt((CAST_LONG *)ti,schedule);
-			dp=(char *)d;
-			t=ti[0]; l2n(t,dp);
-			t=ti[1]; l2n(t,dp);
-			save++;
-			}
-		*(out++)= *(in++)^d[n];
-		n=(n+1)&0x07;
-		}
-	if (save)
-		{
-		v0=ti[0];
-		v1=ti[1];
-		iv=ivec;
-		l2n(v0,iv);
-		l2n(v1,iv);
-		}
-	t=v0=v1=ti[0]=ti[1]=0;
-	*num=n;
-	}
-
diff --git a/crypto/openssl/crypto/cast/c_skey.c b/crypto/openssl/crypto/cast/c_skey.c
deleted file mode 100644
index 76e40005c998..000000000000
--- a/crypto/openssl/crypto/cast/c_skey.c
+++ /dev/null
@@ -1,166 +0,0 @@
-/* crypto/cast/c_skey.c */
-/* Copyright (C) 1995-1998 Eric Young (eay@cryptsoft.com)
- * All rights reserved.
- *
- * This package is an SSL implementation written
- * by Eric Young (eay@cryptsoft.com).
- * The implementation was written so as to conform with Netscapes SSL.
- * 
- * This library is free for commercial and non-commercial use as long as
- * the following conditions are aheared to.  The following conditions
- * apply to all code found in this distribution, be it the RC4, RSA,
- * lhash, DES, etc., code; not just the SSL code.  The SSL documentation
- * included with this distribution is covered by the same copyright terms
- * except that the holder is Tim Hudson (tjh@cryptsoft.com).
- * 
- * Copyright remains Eric Young's, and as such any Copyright notices in
- * the code are not to be removed.
- * If this package is used in a product, Eric Young should be given attribution
- * as the author of the parts of the library used.
- * This can be in the form of a textual message at program startup or
- * in documentation (online or textual) provided with the package.
- * 
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions
- * are met:
- * 1. Redistributions of source code must retain the copyright
- *    notice, this list of conditions and the following disclaimer.
- * 2. Redistributions in binary form must reproduce the above copyright
- *    notice, this list of conditions and the following disclaimer in the
- *    documentation and/or other materials provided with the distribution.
- * 3. All advertising materials mentioning features or use of this software
- *    must display the following acknowledgement:
- *    "This product includes cryptographic software written by
- *     Eric Young (eay@cryptsoft.com)"
- *    The word 'cryptographic' can be left out if the rouines from the library
- *    being used are not cryptographic related :-).
- * 4. If you include any Windows specific code (or a derivative thereof) from 
- *    the apps directory (application code) you must include an acknowledgement:
- *    "This product includes software written by Tim Hudson (tjh@cryptsoft.com)"
- * 
- * THIS SOFTWARE IS PROVIDED BY ERIC YOUNG ``AS IS'' AND
- * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
- * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
- * ARE DISCLAIMED.  IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE
- * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
- * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
- * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
- * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
- * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
- * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
- * SUCH DAMAGE.
- * 
- * The licence and distribution terms for any publically available version or
- * derivative of this code cannot be changed.  i.e. this code cannot simply be
- * copied and put under another distribution licence
- * [including the GNU Public Licence.]
- */
-
-#include <openssl/cast.h>
-#include "cast_lcl.h"
-#include "cast_s.h"
-
-#define CAST_exp(l,A,a,n) \
-	A[n/4]=l; \
-	a[n+3]=(l    )&0xff; \
-	a[n+2]=(l>> 8)&0xff; \
-	a[n+1]=(l>>16)&0xff; \
-	a[n+0]=(l>>24)&0xff;
-
-#define S4 CAST_S_table4
-#define S5 CAST_S_table5
-#define S6 CAST_S_table6
-#define S7 CAST_S_table7
-
-void CAST_set_key(CAST_KEY *key, int len, const unsigned char *data)
-	{
-	CAST_LONG x[16];
-	CAST_LONG z[16];
-	CAST_LONG k[32];
-	CAST_LONG X[4],Z[4];
-	CAST_LONG l,*K;
-	int i;
-
-	for (i=0; i<16; i++) x[i]=0;
-	if (len > 16) len=16;
-	for (i=0; i<len; i++)
-		x[i]=data[i];
-	if(len <= 10)
-	    key->short_key=1;
-	else
-	    key->short_key=0;
-
-	K= &k[0];
-	X[0]=((x[ 0]<<24)|(x[ 1]<<16)|(x[ 2]<<8)|x[ 3])&0xffffffffL;
-	X[1]=((x[ 4]<<24)|(x[ 5]<<16)|(x[ 6]<<8)|x[ 7])&0xffffffffL;
-	X[2]=((x[ 8]<<24)|(x[ 9]<<16)|(x[10]<<8)|x[11])&0xffffffffL;
-	X[3]=((x[12]<<24)|(x[13]<<16)|(x[14]<<8)|x[15])&0xffffffffL;
-
-	for (;;)
-		{
-	l=X[0]^S4[x[13]]^S5[x[15]]^S6[x[12]]^S7[x[14]]^S6[x[ 8]];
-	CAST_exp(l,Z,z, 0);
-	l=X[2]^S4[z[ 0]]^S5[z[ 2]]^S6[z[ 1]]^S7[z[ 3]]^S7[x[10]];
-	CAST_exp(l,Z,z, 4);
-	l=X[3]^S4[z[ 7]]^S5[z[ 6]]^S6[z[ 5]]^S7[z[ 4]]^S4[x[ 9]];
-	CAST_exp(l,Z,z, 8);
-	l=X[1]^S4[z[10]]^S5[z[ 9]]^S6[z[11]]^S7[z[ 8]]^S5[x[11]];
-	CAST_exp(l,Z,z,12);
-
-	K[ 0]= S4[z[ 8]]^S5[z[ 9]]^S6[z[ 7]]^S7[z[ 6]]^S4[z[ 2]];
-	K[ 1]= S4[z[10]]^S5[z[11]]^S6[z[ 5]]^S7[z[ 4]]^S5[z[ 6]];
-	K[ 2]= S4[z[12]]^S5[z[13]]^S6[z[ 3]]^S7[z[ 2]]^S6[z[ 9]];
-	K[ 3]= S4[z[14]]^S5[z[15]]^S6[z[ 1]]^S7[z[ 0]]^S7[z[12]];
-
-	l=Z[2]^S4[z[ 5]]^S5[z[ 7]]^S6[z[ 4]]^S7[z[ 6]]^S6[z[ 0]];
-	CAST_exp(l,X,x, 0);
-	l=Z[0]^S4[x[ 0]]^S5[x[ 2]]^S6[x[ 1]]^S7[x[ 3]]^S7[z[ 2]];
-	CAST_exp(l,X,x, 4);
-	l=Z[1]^S4[x[ 7]]^S5[x[ 6]]^S6[x[ 5]]^S7[x[ 4]]^S4[z[ 1]];
-	CAST_exp(l,X,x, 8);
-	l=Z[3]^S4[x[10]]^S5[x[ 9]]^S6[x[11]]^S7[x[ 8]]^S5[z[ 3]];
-	CAST_exp(l,X,x,12);
-
-	K[ 4]= S4[x[ 3]]^S5[x[ 2]]^S6[x[12]]^S7[x[13]]^S4[x[ 8]];
-	K[ 5]= S4[x[ 1]]^S5[x[ 0]]^S6[x[14]]^S7[x[15]]^S5[x[13]];
-	K[ 6]= S4[x[ 7]]^S5[x[ 6]]^S6[x[ 8]]^S7[x[ 9]]^S6[x[ 3]];
-	K[ 7]= S4[x[ 5]]^S5[x[ 4]]^S6[x[10]]^S7[x[11]]^S7[x[ 7]];
-
-	l=X[0]^S4[x[13]]^S5[x[15]]^S6[x[12]]^S7[x[14]]^S6[x[ 8]];
-	CAST_exp(l,Z,z, 0);
-	l=X[2]^S4[z[ 0]]^S5[z[ 2]]^S6[z[ 1]]^S7[z[ 3]]^S7[x[10]];
-	CAST_exp(l,Z,z, 4);
-	l=X[3]^S4[z[ 7]]^S5[z[ 6]]^S6[z[ 5]]^S7[z[ 4]]^S4[x[ 9]];
-	CAST_exp(l,Z,z, 8);
-	l=X[1]^S4[z[10]]^S5[z[ 9]]^S6[z[11]]^S7[z[ 8]]^S5[x[11]];
-	CAST_exp(l,Z,z,12);
-
-	K[ 8]= S4[z[ 3]]^S5[z[ 2]]^S6[z[12]]^S7[z[13]]^S4[z[ 9]];
-	K[ 9]= S4[z[ 1]]^S5[z[ 0]]^S6[z[14]]^S7[z[15]]^S5[z[12]];
-	K[10]= S4[z[ 7]]^S5[z[ 6]]^S6[z[ 8]]^S7[z[ 9]]^S6[z[ 2]];
-	K[11]= S4[z[ 5]]^S5[z[ 4]]^S6[z[10]]^S7[z[11]]^S7[z[ 6]];
-
-	l=Z[2]^S4[z[ 5]]^S5[z[ 7]]^S6[z[ 4]]^S7[z[ 6]]^S6[z[ 0]];
-	CAST_exp(l,X,x, 0);
-	l=Z[0]^S4[x[ 0]]^S5[x[ 2]]^S6[x[ 1]]^S7[x[ 3]]^S7[z[ 2]];
-	CAST_exp(l,X,x, 4);
-	l=Z[1]^S4[x[ 7]]^S5[x[ 6]]^S6[x[ 5]]^S7[x[ 4]]^S4[z[ 1]];
-	CAST_exp(l,X,x, 8);
-	l=Z[3]^S4[x[10]]^S5[x[ 9]]^S6[x[11]]^S7[x[ 8]]^S5[z[ 3]];
-	CAST_exp(l,X,x,12);
-
-	K[12]= S4[x[ 8]]^S5[x[ 9]]^S6[x[ 7]]^S7[x[ 6]]^S4[x[ 3]];
-	K[13]= S4[x[10]]^S5[x[11]]^S6[x[ 5]]^S7[x[ 4]]^S5[x[ 7]];
-	K[14]= S4[x[12]]^S5[x[13]]^S6[x[ 3]]^S7[x[ 2]]^S6[x[ 8]];
-	K[15]= S4[x[14]]^S5[x[15]]^S6[x[ 1]]^S7[x[ 0]]^S7[x[13]];
-	if (K != k)  break;
-	K+=16;
-		}
-
-	for (i=0; i<16; i++)
-		{
-		key->data[i*2]=k[i];
-		key->data[i*2+1]=((k[i+16])+16)&0x1f;
-		}
-	}
-
diff --git a/crypto/openssl/crypto/cast/cast.h b/crypto/openssl/crypto/cast/cast.h
deleted file mode 100644
index 90b45b950aa8..000000000000
--- a/crypto/openssl/crypto/cast/cast.h
+++ /dev/null
@@ -1,105 +0,0 @@
-/* crypto/cast/cast.h */
-/* Copyright (C) 1995-1998 Eric Young (eay@cryptsoft.com)
- * All rights reserved.
- *
- * This package is an SSL implementation written
- * by Eric Young (eay@cryptsoft.com).
- * The implementation was written so as to conform with Netscapes SSL.
- * 
- * This library is free for commercial and non-commercial use as long as
- * the following conditions are aheared to.  The following conditions
- * apply to all code found in this distribution, be it the RC4, RSA,
- * lhash, DES, etc., code; not just the SSL code.  The SSL documentation
- * included with this distribution is covered by the same copyright terms
- * except that the holder is Tim Hudson (tjh@cryptsoft.com).
- * 
- * Copyright remains Eric Young's, and as such any Copyright notices in
- * the code are not to be removed.
- * If this package is used in a product, Eric Young should be given attribution
- * as the author of the parts of the library used.
- * This can be in the form of a textual message at program startup or
- * in documentation (online or textual) provided with the package.
- * 
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions
- * are met:
- * 1. Redistributions of source code must retain the copyright
- *    notice, this list of conditions and the following disclaimer.
- * 2. Redistributions in binary form must reproduce the above copyright
- *    notice, this list of conditions and the following disclaimer in the
- *    documentation and/or other materials provided with the distribution.
- * 3. All advertising materials mentioning features or use of this software
- *    must display the following acknowledgement:
- *    "This product includes cryptographic software written by
- *     Eric Young (eay@cryptsoft.com)"
- *    The word 'cryptographic' can be left out if the rouines from the library
- *    being used are not cryptographic related :-).
- * 4. If you include any Windows specific code (or a derivative thereof) from 
- *    the apps directory (application code) you must include an acknowledgement:
- *    "This product includes software written by Tim Hudson (tjh@cryptsoft.com)"
- * 
- * THIS SOFTWARE IS PROVIDED BY ERIC YOUNG ``AS IS'' AND
- * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
- * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
- * ARE DISCLAIMED.  IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE
- * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
- * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
- * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
- * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
- * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
- * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
- * SUCH DAMAGE.
- * 
- * The licence and distribution terms for any publically available version or
- * derivative of this code cannot be changed.  i.e. this code cannot simply be
- * copied and put under another distribution licence
- * [including the GNU Public Licence.]
- */
-
-#ifndef HEADER_CAST_H
-#define HEADER_CAST_H
-
-#ifdef  __cplusplus
-extern "C" {
-#endif
-
-#include <openssl/opensslconf.h>
-
-#ifdef OPENSSL_NO_CAST
-#error CAST is disabled.
-#endif
-
-#define CAST_ENCRYPT	1
-#define CAST_DECRYPT	0
-
-#define CAST_LONG unsigned long
-
-#define CAST_BLOCK	8
-#define CAST_KEY_LENGTH	16
-
-typedef struct cast_key_st
-	{
-	CAST_LONG data[32];
-	int short_key;	/* Use reduced rounds for short key */
-	} CAST_KEY;
-
- 
-void CAST_set_key(CAST_KEY *key, int len, const unsigned char *data);
-void CAST_ecb_encrypt(const unsigned char *in,unsigned char *out,CAST_KEY *key,
-		      int enc);
-void CAST_encrypt(CAST_LONG *data,CAST_KEY *key);
-void CAST_decrypt(CAST_LONG *data,CAST_KEY *key);
-void CAST_cbc_encrypt(const unsigned char *in, unsigned char *out, long length,
-		      CAST_KEY *ks, unsigned char *iv, int enc);
-void CAST_cfb64_encrypt(const unsigned char *in, unsigned char *out,
-			long length, CAST_KEY *schedule, unsigned char *ivec,
-			int *num, int enc);
-void CAST_ofb64_encrypt(const unsigned char *in, unsigned char *out, 
-			long length, CAST_KEY *schedule, unsigned char *ivec,
-			int *num);
-
-#ifdef  __cplusplus
-}
-#endif
-
-#endif
diff --git a/crypto/openssl/crypto/cast/cast_lcl.h b/crypto/openssl/crypto/cast/cast_lcl.h
deleted file mode 100644
index e756021a33dc..000000000000
--- a/crypto/openssl/crypto/cast/cast_lcl.h
+++ /dev/null
@@ -1,227 +0,0 @@
-/* crypto/cast/cast_lcl.h */
-/* Copyright (C) 1995-1998 Eric Young (eay@cryptsoft.com)
- * All rights reserved.
- *
- * This package is an SSL implementation written
- * by Eric Young (eay@cryptsoft.com).
- * The implementation was written so as to conform with Netscapes SSL.
- * 
- * This library is free for commercial and non-commercial use as long as
- * the following conditions are aheared to.  The following conditions
- * apply to all code found in this distribution, be it the RC4, RSA,
- * lhash, DES, etc., code; not just the SSL code.  The SSL documentation
- * included with this distribution is covered by the same copyright terms
- * except that the holder is Tim Hudson (tjh@cryptsoft.com).
- * 
- * Copyright remains Eric Young's, and as such any Copyright notices in
- * the code are not to be removed.
- * If this package is used in a product, Eric Young should be given attribution
- * as the author of the parts of the library used.
- * This can be in the form of a textual message at program startup or
- * in documentation (online or textual) provided with the package.
- * 
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions
- * are met:
- * 1. Redistributions of source code must retain the copyright
- *    notice, this list of conditions and the following disclaimer.
- * 2. Redistributions in binary form must reproduce the above copyright
- *    notice, this list of conditions and the following disclaimer in the
- *    documentation and/or other materials provided with the distribution.
- * 3. All advertising materials mentioning features or use of this software
- *    must display the following acknowledgement:
- *    "This product includes cryptographic software written by
- *     Eric Young (eay@cryptsoft.com)"
- *    The word 'cryptographic' can be left out if the rouines from the library
- *    being used are not cryptographic related :-).
- * 4. If you include any Windows specific code (or a derivative thereof) from 
- *    the apps directory (application code) you must include an acknowledgement:
- *    "This product includes software written by Tim Hudson (tjh@cryptsoft.com)"
- * 
- * THIS SOFTWARE IS PROVIDED BY ERIC YOUNG ``AS IS'' AND
- * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
- * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
- * ARE DISCLAIMED.  IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE
- * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
- * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
- * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
- * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
- * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
- * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
- * SUCH DAMAGE.
- * 
- * The licence and distribution terms for any publically available version or
- * derivative of this code cannot be changed.  i.e. this code cannot simply be
- * copied and put under another distribution licence
- * [including the GNU Public Licence.]
- */
-
-
-#include "e_os.h"
-
-#ifdef OPENSSL_SYS_WIN32
-#include <stdlib.h>
-#endif
-
-
-#undef c2l
-#define c2l(c,l)	(l =((unsigned long)(*((c)++)))    , \
-			 l|=((unsigned long)(*((c)++)))<< 8L, \
-			 l|=((unsigned long)(*((c)++)))<<16L, \
-			 l|=((unsigned long)(*((c)++)))<<24L)
-
-/* NOTE - c is not incremented as per c2l */
-#undef c2ln
-#define c2ln(c,l1,l2,n)	{ \
-			c+=n; \
-			l1=l2=0; \
-			switch (n) { \
-			case 8: l2 =((unsigned long)(*(--(c))))<<24L; \
-			case 7: l2|=((unsigned long)(*(--(c))))<<16L; \
-			case 6: l2|=((unsigned long)(*(--(c))))<< 8L; \
-			case 5: l2|=((unsigned long)(*(--(c))));     \
-			case 4: l1 =((unsigned long)(*(--(c))))<<24L; \
-			case 3: l1|=((unsigned long)(*(--(c))))<<16L; \
-			case 2: l1|=((unsigned long)(*(--(c))))<< 8L; \
-			case 1: l1|=((unsigned long)(*(--(c))));     \
-				} \
-			}
-
-#undef l2c
-#define l2c(l,c)	(*((c)++)=(unsigned char)(((l)     )&0xff), \
-			 *((c)++)=(unsigned char)(((l)>> 8L)&0xff), \
-			 *((c)++)=(unsigned char)(((l)>>16L)&0xff), \
-			 *((c)++)=(unsigned char)(((l)>>24L)&0xff))
-
-/* NOTE - c is not incremented as per l2c */
-#undef l2cn
-#define l2cn(l1,l2,c,n)	{ \
-			c+=n; \
-			switch (n) { \
-			case 8: *(--(c))=(unsigned char)(((l2)>>24L)&0xff); \
-			case 7: *(--(c))=(unsigned char)(((l2)>>16L)&0xff); \
-			case 6: *(--(c))=(unsigned char)(((l2)>> 8L)&0xff); \
-			case 5: *(--(c))=(unsigned char)(((l2)     )&0xff); \
-			case 4: *(--(c))=(unsigned char)(((l1)>>24L)&0xff); \
-			case 3: *(--(c))=(unsigned char)(((l1)>>16L)&0xff); \
-			case 2: *(--(c))=(unsigned char)(((l1)>> 8L)&0xff); \
-			case 1: *(--(c))=(unsigned char)(((l1)     )&0xff); \
-				} \
-			}
-
-/* NOTE - c is not incremented as per n2l */
-#define n2ln(c,l1,l2,n)	{ \
-			c+=n; \
-			l1=l2=0; \
-			switch (n) { \
-			case 8: l2 =((unsigned long)(*(--(c))))    ; \
-			case 7: l2|=((unsigned long)(*(--(c))))<< 8; \
-			case 6: l2|=((unsigned long)(*(--(c))))<<16; \
-			case 5: l2|=((unsigned long)(*(--(c))))<<24; \
-			case 4: l1 =((unsigned long)(*(--(c))))    ; \
-			case 3: l1|=((unsigned long)(*(--(c))))<< 8; \
-			case 2: l1|=((unsigned long)(*(--(c))))<<16; \
-			case 1: l1|=((unsigned long)(*(--(c))))<<24; \
-				} \
-			}
-
-/* NOTE - c is not incremented as per l2n */
-#define l2nn(l1,l2,c,n)	{ \
-			c+=n; \
-			switch (n) { \
-			case 8: *(--(c))=(unsigned char)(((l2)    )&0xff); \
-			case 7: *(--(c))=(unsigned char)(((l2)>> 8)&0xff); \
-			case 6: *(--(c))=(unsigned char)(((l2)>>16)&0xff); \
-			case 5: *(--(c))=(unsigned char)(((l2)>>24)&0xff); \
-			case 4: *(--(c))=(unsigned char)(((l1)    )&0xff); \
-			case 3: *(--(c))=(unsigned char)(((l1)>> 8)&0xff); \
-			case 2: *(--(c))=(unsigned char)(((l1)>>16)&0xff); \
-			case 1: *(--(c))=(unsigned char)(((l1)>>24)&0xff); \
-				} \
-			}
-
-#undef n2l
-#define n2l(c,l)        (l =((unsigned long)(*((c)++)))<<24L, \
-                         l|=((unsigned long)(*((c)++)))<<16L, \
-                         l|=((unsigned long)(*((c)++)))<< 8L, \
-                         l|=((unsigned long)(*((c)++))))
-
-#undef l2n
-#define l2n(l,c)        (*((c)++)=(unsigned char)(((l)>>24L)&0xff), \
-                         *((c)++)=(unsigned char)(((l)>>16L)&0xff), \
-                         *((c)++)=(unsigned char)(((l)>> 8L)&0xff), \
-                         *((c)++)=(unsigned char)(((l)     )&0xff))
-
-#if defined(OPENSSL_SYS_WIN32) && defined(_MSC_VER)
-#define ROTL(a,n)     (_lrotl(a,n))
-#else
-#define ROTL(a,n)     ((((a)<<(n))&0xffffffffL)|((a)>>(32-(n))))
-#endif
-
-#define C_M    0x3fc
-#define C_0    22L
-#define C_1    14L
-#define C_2     6L
-#define C_3     2L /* left shift */
-
-/* The rotate has an extra 16 added to it to help the x86 asm */
-#if defined(CAST_PTR)
-#define E_CAST(n,key,L,R,OP1,OP2,OP3) \
-	{ \
-	int i; \
-	t=(key[n*2] OP1 R)&0xffffffffL; \
-	i=key[n*2+1]; \
-	t=ROTL(t,i); \
-	L^= (((((*(CAST_LONG *)((unsigned char *) \
-			CAST_S_table0+((t>>C_2)&C_M)) OP2 \
-		*(CAST_LONG *)((unsigned char *) \
-			CAST_S_table1+((t<<C_3)&C_M)))&0xffffffffL) OP3 \
-		*(CAST_LONG *)((unsigned char *) \
-			CAST_S_table2+((t>>C_0)&C_M)))&0xffffffffL) OP1 \
-		*(CAST_LONG *)((unsigned char *) \
-			CAST_S_table3+((t>>C_1)&C_M)))&0xffffffffL; \
-	}
-#elif defined(CAST_PTR2)
-#define E_CAST(n,key,L,R,OP1,OP2,OP3) \
-	{ \
-	int i; \
-	CAST_LONG u,v,w; \
-	w=(key[n*2] OP1 R)&0xffffffffL; \
-	i=key[n*2+1]; \
-	w=ROTL(w,i); \
-	u=w>>C_2; \
-	v=w<<C_3; \
-	u&=C_M; \
-	v&=C_M; \
-	t= *(CAST_LONG *)((unsigned char *)CAST_S_table0+u); \
-	u=w>>C_0; \
-	t=(t OP2 *(CAST_LONG *)((unsigned char *)CAST_S_table1+v))&0xffffffffL;\
-	v=w>>C_1; \
-	u&=C_M; \
-	v&=C_M; \
-	t=(t OP3 *(CAST_LONG *)((unsigned char *)CAST_S_table2+u)&0xffffffffL);\
-	t=(t OP1 *(CAST_LONG *)((unsigned char *)CAST_S_table3+v)&0xffffffffL);\
-	L^=(t&0xffffffff); \
-	}
-#else
-#define E_CAST(n,key,L,R,OP1,OP2,OP3) \
-	{ \
-	CAST_LONG a,b,c,d; \
-	t=(key[n*2] OP1 R)&0xffffffff; \
-	t=ROTL(t,(key[n*2+1])); \
-	a=CAST_S_table0[(t>> 8)&0xff]; \
-	b=CAST_S_table1[(t    )&0xff]; \
-	c=CAST_S_table2[(t>>24)&0xff]; \
-	d=CAST_S_table3[(t>>16)&0xff]; \
-	L^=(((((a OP2 b)&0xffffffffL) OP3 c)&0xffffffffL) OP1 d)&0xffffffffL; \
-	}
-#endif
-
-extern const CAST_LONG CAST_S_table0[256];
-extern const CAST_LONG CAST_S_table1[256];
-extern const CAST_LONG CAST_S_table2[256];
-extern const CAST_LONG CAST_S_table3[256];
-extern const CAST_LONG CAST_S_table4[256];
-extern const CAST_LONG CAST_S_table5[256];
-extern const CAST_LONG CAST_S_table6[256];
-extern const CAST_LONG CAST_S_table7[256];
diff --git a/crypto/openssl/crypto/cast/cast_s.h b/crypto/openssl/crypto/cast/cast_s.h
deleted file mode 100644
index c483fd5e43e1..000000000000
--- a/crypto/openssl/crypto/cast/cast_s.h
+++ /dev/null
@@ -1,585 +0,0 @@
-/* crypto/cast/cast_s.h */
-/* Copyright (C) 1995-1998 Eric Young (eay@cryptsoft.com)
- * All rights reserved.
- *
- * This package is an SSL implementation written
- * by Eric Young (eay@cryptsoft.com).
- * The implementation was written so as to conform with Netscapes SSL.
- * 
- * This library is free for commercial and non-commercial use as long as
- * the following conditions are aheared to.  The following conditions
- * apply to all code found in this distribution, be it the RC4, RSA,
- * lhash, DES, etc., code; not just the SSL code.  The SSL documentation
- * included with this distribution is covered by the same copyright terms
- * except that the holder is Tim Hudson (tjh@cryptsoft.com).
- * 
- * Copyright remains Eric Young's, and as such any Copyright notices in
- * the code are not to be removed.
- * If this package is used in a product, Eric Young should be given attribution
- * as the author of the parts of the library used.
- * This can be in the form of a textual message at program startup or
- * in documentation (online or textual) provided with the package.
- * 
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions
- * are met:
- * 1. Redistributions of source code must retain the copyright
- *    notice, this list of conditions and the following disclaimer.
- * 2. Redistributions in binary form must reproduce the above copyright
- *    notice, this list of conditions and the following disclaimer in the
- *    documentation and/or other materials provided with the distribution.
- * 3. All advertising materials mentioning features or use of this software
- *    must display the following acknowledgement:
- *    "This product includes cryptographic software written by
- *     Eric Young (eay@cryptsoft.com)"
- *    The word 'cryptographic' can be left out if the rouines from the library
- *    being used are not cryptographic related :-).
- * 4. If you include any Windows specific code (or a derivative thereof) from 
- *    the apps directory (application code) you must include an acknowledgement:
- *    "This product includes software written by Tim Hudson (tjh@cryptsoft.com)"
- * 
- * THIS SOFTWARE IS PROVIDED BY ERIC YOUNG ``AS IS'' AND
- * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
- * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
- * ARE DISCLAIMED.  IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE
- * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
- * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
- * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
- * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
- * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
- * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
- * SUCH DAMAGE.
- * 
- * The licence and distribution terms for any publically available version or
- * derivative of this code cannot be changed.  i.e. this code cannot simply be
- * copied and put under another distribution licence
- * [including the GNU Public Licence.]
- */
-OPENSSL_GLOBAL const CAST_LONG CAST_S_table0[256]={
-	0x30fb40d4,0x9fa0ff0b,0x6beccd2f,0x3f258c7a,
-	0x1e213f2f,0x9c004dd3,0x6003e540,0xcf9fc949,
-	0xbfd4af27,0x88bbbdb5,0xe2034090,0x98d09675,
-	0x6e63a0e0,0x15c361d2,0xc2e7661d,0x22d4ff8e,
-	0x28683b6f,0xc07fd059,0xff2379c8,0x775f50e2,
-	0x43c340d3,0xdf2f8656,0x887ca41a,0xa2d2bd2d,
-	0xa1c9e0d6,0x346c4819,0x61b76d87,0x22540f2f,
-	0x2abe32e1,0xaa54166b,0x22568e3a,0xa2d341d0,
-	0x66db40c8,0xa784392f,0x004dff2f,0x2db9d2de,
-	0x97943fac,0x4a97c1d8,0x527644b7,0xb5f437a7,
-	0xb82cbaef,0xd751d159,0x6ff7f0ed,0x5a097a1f,
-	0x827b68d0,0x90ecf52e,0x22b0c054,0xbc8e5935,
-	0x4b6d2f7f,0x50bb64a2,0xd2664910,0xbee5812d,
-	0xb7332290,0xe93b159f,0xb48ee411,0x4bff345d,
-	0xfd45c240,0xad31973f,0xc4f6d02e,0x55fc8165,
-	0xd5b1caad,0xa1ac2dae,0xa2d4b76d,0xc19b0c50,
-	0x882240f2,0x0c6e4f38,0xa4e4bfd7,0x4f5ba272,
-	0x564c1d2f,0xc59c5319,0xb949e354,0xb04669fe,
-	0xb1b6ab8a,0xc71358dd,0x6385c545,0x110f935d,
-	0x57538ad5,0x6a390493,0xe63d37e0,0x2a54f6b3,
-	0x3a787d5f,0x6276a0b5,0x19a6fcdf,0x7a42206a,
-	0x29f9d4d5,0xf61b1891,0xbb72275e,0xaa508167,
-	0x38901091,0xc6b505eb,0x84c7cb8c,0x2ad75a0f,
-	0x874a1427,0xa2d1936b,0x2ad286af,0xaa56d291,
-	0xd7894360,0x425c750d,0x93b39e26,0x187184c9,
-	0x6c00b32d,0x73e2bb14,0xa0bebc3c,0x54623779,
-	0x64459eab,0x3f328b82,0x7718cf82,0x59a2cea6,
-	0x04ee002e,0x89fe78e6,0x3fab0950,0x325ff6c2,
-	0x81383f05,0x6963c5c8,0x76cb5ad6,0xd49974c9,
-	0xca180dcf,0x380782d5,0xc7fa5cf6,0x8ac31511,
-	0x35e79e13,0x47da91d0,0xf40f9086,0xa7e2419e,
-	0x31366241,0x051ef495,0xaa573b04,0x4a805d8d,
-	0x548300d0,0x00322a3c,0xbf64cddf,0xba57a68e,
-	0x75c6372b,0x50afd341,0xa7c13275,0x915a0bf5,
-	0x6b54bfab,0x2b0b1426,0xab4cc9d7,0x449ccd82,
-	0xf7fbf265,0xab85c5f3,0x1b55db94,0xaad4e324,
-	0xcfa4bd3f,0x2deaa3e2,0x9e204d02,0xc8bd25ac,
-	0xeadf55b3,0xd5bd9e98,0xe31231b2,0x2ad5ad6c,
-	0x954329de,0xadbe4528,0xd8710f69,0xaa51c90f,
-	0xaa786bf6,0x22513f1e,0xaa51a79b,0x2ad344cc,
-	0x7b5a41f0,0xd37cfbad,0x1b069505,0x41ece491,
-	0xb4c332e6,0x032268d4,0xc9600acc,0xce387e6d,
-	0xbf6bb16c,0x6a70fb78,0x0d03d9c9,0xd4df39de,
-	0xe01063da,0x4736f464,0x5ad328d8,0xb347cc96,
-	0x75bb0fc3,0x98511bfb,0x4ffbcc35,0xb58bcf6a,
-	0xe11f0abc,0xbfc5fe4a,0xa70aec10,0xac39570a,
-	0x3f04442f,0x6188b153,0xe0397a2e,0x5727cb79,
-	0x9ceb418f,0x1cacd68d,0x2ad37c96,0x0175cb9d,
-	0xc69dff09,0xc75b65f0,0xd9db40d8,0xec0e7779,
-	0x4744ead4,0xb11c3274,0xdd24cb9e,0x7e1c54bd,
-	0xf01144f9,0xd2240eb1,0x9675b3fd,0xa3ac3755,
-	0xd47c27af,0x51c85f4d,0x56907596,0xa5bb15e6,
-	0x580304f0,0xca042cf1,0x011a37ea,0x8dbfaadb,
-	0x35ba3e4a,0x3526ffa0,0xc37b4d09,0xbc306ed9,
-	0x98a52666,0x5648f725,0xff5e569d,0x0ced63d0,
-	0x7c63b2cf,0x700b45e1,0xd5ea50f1,0x85a92872,
-	0xaf1fbda7,0xd4234870,0xa7870bf3,0x2d3b4d79,
-	0x42e04198,0x0cd0ede7,0x26470db8,0xf881814c,
-	0x474d6ad7,0x7c0c5e5c,0xd1231959,0x381b7298,
-	0xf5d2f4db,0xab838653,0x6e2f1e23,0x83719c9e,
-	0xbd91e046,0x9a56456e,0xdc39200c,0x20c8c571,
-	0x962bda1c,0xe1e696ff,0xb141ab08,0x7cca89b9,
-	0x1a69e783,0x02cc4843,0xa2f7c579,0x429ef47d,
-	0x427b169c,0x5ac9f049,0xdd8f0f00,0x5c8165bf,
-	};
-OPENSSL_GLOBAL const CAST_LONG CAST_S_table1[256]={
-	0x1f201094,0xef0ba75b,0x69e3cf7e,0x393f4380,
-	0xfe61cf7a,0xeec5207a,0x55889c94,0x72fc0651,
-	0xada7ef79,0x4e1d7235,0xd55a63ce,0xde0436ba,
-	0x99c430ef,0x5f0c0794,0x18dcdb7d,0xa1d6eff3,
-	0xa0b52f7b,0x59e83605,0xee15b094,0xe9ffd909,
-	0xdc440086,0xef944459,0xba83ccb3,0xe0c3cdfb,
-	0xd1da4181,0x3b092ab1,0xf997f1c1,0xa5e6cf7b,
-	0x01420ddb,0xe4e7ef5b,0x25a1ff41,0xe180f806,
-	0x1fc41080,0x179bee7a,0xd37ac6a9,0xfe5830a4,
-	0x98de8b7f,0x77e83f4e,0x79929269,0x24fa9f7b,
-	0xe113c85b,0xacc40083,0xd7503525,0xf7ea615f,
-	0x62143154,0x0d554b63,0x5d681121,0xc866c359,
-	0x3d63cf73,0xcee234c0,0xd4d87e87,0x5c672b21,
-	0x071f6181,0x39f7627f,0x361e3084,0xe4eb573b,
-	0x602f64a4,0xd63acd9c,0x1bbc4635,0x9e81032d,
-	0x2701f50c,0x99847ab4,0xa0e3df79,0xba6cf38c,
-	0x10843094,0x2537a95e,0xf46f6ffe,0xa1ff3b1f,
-	0x208cfb6a,0x8f458c74,0xd9e0a227,0x4ec73a34,
-	0xfc884f69,0x3e4de8df,0xef0e0088,0x3559648d,
-	0x8a45388c,0x1d804366,0x721d9bfd,0xa58684bb,
-	0xe8256333,0x844e8212,0x128d8098,0xfed33fb4,
-	0xce280ae1,0x27e19ba5,0xd5a6c252,0xe49754bd,
-	0xc5d655dd,0xeb667064,0x77840b4d,0xa1b6a801,
-	0x84db26a9,0xe0b56714,0x21f043b7,0xe5d05860,
-	0x54f03084,0x066ff472,0xa31aa153,0xdadc4755,
-	0xb5625dbf,0x68561be6,0x83ca6b94,0x2d6ed23b,
-	0xeccf01db,0xa6d3d0ba,0xb6803d5c,0xaf77a709,
-	0x33b4a34c,0x397bc8d6,0x5ee22b95,0x5f0e5304,
-	0x81ed6f61,0x20e74364,0xb45e1378,0xde18639b,
-	0x881ca122,0xb96726d1,0x8049a7e8,0x22b7da7b,
-	0x5e552d25,0x5272d237,0x79d2951c,0xc60d894c,
-	0x488cb402,0x1ba4fe5b,0xa4b09f6b,0x1ca815cf,
-	0xa20c3005,0x8871df63,0xb9de2fcb,0x0cc6c9e9,
-	0x0beeff53,0xe3214517,0xb4542835,0x9f63293c,
-	0xee41e729,0x6e1d2d7c,0x50045286,0x1e6685f3,
-	0xf33401c6,0x30a22c95,0x31a70850,0x60930f13,
-	0x73f98417,0xa1269859,0xec645c44,0x52c877a9,
-	0xcdff33a6,0xa02b1741,0x7cbad9a2,0x2180036f,
-	0x50d99c08,0xcb3f4861,0xc26bd765,0x64a3f6ab,
-	0x80342676,0x25a75e7b,0xe4e6d1fc,0x20c710e6,
-	0xcdf0b680,0x17844d3b,0x31eef84d,0x7e0824e4,
-	0x2ccb49eb,0x846a3bae,0x8ff77888,0xee5d60f6,
-	0x7af75673,0x2fdd5cdb,0xa11631c1,0x30f66f43,
-	0xb3faec54,0x157fd7fa,0xef8579cc,0xd152de58,
-	0xdb2ffd5e,0x8f32ce19,0x306af97a,0x02f03ef8,
-	0x99319ad5,0xc242fa0f,0xa7e3ebb0,0xc68e4906,
-	0xb8da230c,0x80823028,0xdcdef3c8,0xd35fb171,
-	0x088a1bc8,0xbec0c560,0x61a3c9e8,0xbca8f54d,
-	0xc72feffa,0x22822e99,0x82c570b4,0xd8d94e89,
-	0x8b1c34bc,0x301e16e6,0x273be979,0xb0ffeaa6,
-	0x61d9b8c6,0x00b24869,0xb7ffce3f,0x08dc283b,
-	0x43daf65a,0xf7e19798,0x7619b72f,0x8f1c9ba4,
-	0xdc8637a0,0x16a7d3b1,0x9fc393b7,0xa7136eeb,
-	0xc6bcc63e,0x1a513742,0xef6828bc,0x520365d6,
-	0x2d6a77ab,0x3527ed4b,0x821fd216,0x095c6e2e,
-	0xdb92f2fb,0x5eea29cb,0x145892f5,0x91584f7f,
-	0x5483697b,0x2667a8cc,0x85196048,0x8c4bacea,
-	0x833860d4,0x0d23e0f9,0x6c387e8a,0x0ae6d249,
-	0xb284600c,0xd835731d,0xdcb1c647,0xac4c56ea,
-	0x3ebd81b3,0x230eabb0,0x6438bc87,0xf0b5b1fa,
-	0x8f5ea2b3,0xfc184642,0x0a036b7a,0x4fb089bd,
-	0x649da589,0xa345415e,0x5c038323,0x3e5d3bb9,
-	0x43d79572,0x7e6dd07c,0x06dfdf1e,0x6c6cc4ef,
-	0x7160a539,0x73bfbe70,0x83877605,0x4523ecf1,
-	};
-OPENSSL_GLOBAL const CAST_LONG CAST_S_table2[256]={
-	0x8defc240,0x25fa5d9f,0xeb903dbf,0xe810c907,
-	0x47607fff,0x369fe44b,0x8c1fc644,0xaececa90,
-	0xbeb1f9bf,0xeefbcaea,0xe8cf1950,0x51df07ae,
-	0x920e8806,0xf0ad0548,0xe13c8d83,0x927010d5,
-	0x11107d9f,0x07647db9,0xb2e3e4d4,0x3d4f285e,
-	0xb9afa820,0xfade82e0,0xa067268b,0x8272792e,
-	0x553fb2c0,0x489ae22b,0xd4ef9794,0x125e3fbc,
-	0x21fffcee,0x825b1bfd,0x9255c5ed,0x1257a240,
-	0x4e1a8302,0xbae07fff,0x528246e7,0x8e57140e,
-	0x3373f7bf,0x8c9f8188,0xa6fc4ee8,0xc982b5a5,
-	0xa8c01db7,0x579fc264,0x67094f31,0xf2bd3f5f,
-	0x40fff7c1,0x1fb78dfc,0x8e6bd2c1,0x437be59b,
-	0x99b03dbf,0xb5dbc64b,0x638dc0e6,0x55819d99,
-	0xa197c81c,0x4a012d6e,0xc5884a28,0xccc36f71,
-	0xb843c213,0x6c0743f1,0x8309893c,0x0feddd5f,
-	0x2f7fe850,0xd7c07f7e,0x02507fbf,0x5afb9a04,
-	0xa747d2d0,0x1651192e,0xaf70bf3e,0x58c31380,
-	0x5f98302e,0x727cc3c4,0x0a0fb402,0x0f7fef82,
-	0x8c96fdad,0x5d2c2aae,0x8ee99a49,0x50da88b8,
-	0x8427f4a0,0x1eac5790,0x796fb449,0x8252dc15,
-	0xefbd7d9b,0xa672597d,0xada840d8,0x45f54504,
-	0xfa5d7403,0xe83ec305,0x4f91751a,0x925669c2,
-	0x23efe941,0xa903f12e,0x60270df2,0x0276e4b6,
-	0x94fd6574,0x927985b2,0x8276dbcb,0x02778176,
-	0xf8af918d,0x4e48f79e,0x8f616ddf,0xe29d840e,
-	0x842f7d83,0x340ce5c8,0x96bbb682,0x93b4b148,
-	0xef303cab,0x984faf28,0x779faf9b,0x92dc560d,
-	0x224d1e20,0x8437aa88,0x7d29dc96,0x2756d3dc,
-	0x8b907cee,0xb51fd240,0xe7c07ce3,0xe566b4a1,
-	0xc3e9615e,0x3cf8209d,0x6094d1e3,0xcd9ca341,
-	0x5c76460e,0x00ea983b,0xd4d67881,0xfd47572c,
-	0xf76cedd9,0xbda8229c,0x127dadaa,0x438a074e,
-	0x1f97c090,0x081bdb8a,0x93a07ebe,0xb938ca15,
-	0x97b03cff,0x3dc2c0f8,0x8d1ab2ec,0x64380e51,
-	0x68cc7bfb,0xd90f2788,0x12490181,0x5de5ffd4,
-	0xdd7ef86a,0x76a2e214,0xb9a40368,0x925d958f,
-	0x4b39fffa,0xba39aee9,0xa4ffd30b,0xfaf7933b,
-	0x6d498623,0x193cbcfa,0x27627545,0x825cf47a,
-	0x61bd8ba0,0xd11e42d1,0xcead04f4,0x127ea392,
-	0x10428db7,0x8272a972,0x9270c4a8,0x127de50b,
-	0x285ba1c8,0x3c62f44f,0x35c0eaa5,0xe805d231,
-	0x428929fb,0xb4fcdf82,0x4fb66a53,0x0e7dc15b,
-	0x1f081fab,0x108618ae,0xfcfd086d,0xf9ff2889,
-	0x694bcc11,0x236a5cae,0x12deca4d,0x2c3f8cc5,
-	0xd2d02dfe,0xf8ef5896,0xe4cf52da,0x95155b67,
-	0x494a488c,0xb9b6a80c,0x5c8f82bc,0x89d36b45,
-	0x3a609437,0xec00c9a9,0x44715253,0x0a874b49,
-	0xd773bc40,0x7c34671c,0x02717ef6,0x4feb5536,
-	0xa2d02fff,0xd2bf60c4,0xd43f03c0,0x50b4ef6d,
-	0x07478cd1,0x006e1888,0xa2e53f55,0xb9e6d4bc,
-	0xa2048016,0x97573833,0xd7207d67,0xde0f8f3d,
-	0x72f87b33,0xabcc4f33,0x7688c55d,0x7b00a6b0,
-	0x947b0001,0x570075d2,0xf9bb88f8,0x8942019e,
-	0x4264a5ff,0x856302e0,0x72dbd92b,0xee971b69,
-	0x6ea22fde,0x5f08ae2b,0xaf7a616d,0xe5c98767,
-	0xcf1febd2,0x61efc8c2,0xf1ac2571,0xcc8239c2,
-	0x67214cb8,0xb1e583d1,0xb7dc3e62,0x7f10bdce,
-	0xf90a5c38,0x0ff0443d,0x606e6dc6,0x60543a49,
-	0x5727c148,0x2be98a1d,0x8ab41738,0x20e1be24,
-	0xaf96da0f,0x68458425,0x99833be5,0x600d457d,
-	0x282f9350,0x8334b362,0xd91d1120,0x2b6d8da0,
-	0x642b1e31,0x9c305a00,0x52bce688,0x1b03588a,
-	0xf7baefd5,0x4142ed9c,0xa4315c11,0x83323ec5,
-	0xdfef4636,0xa133c501,0xe9d3531c,0xee353783,
-	};
-OPENSSL_GLOBAL const CAST_LONG CAST_S_table3[256]={
-	0x9db30420,0x1fb6e9de,0xa7be7bef,0xd273a298,
-	0x4a4f7bdb,0x64ad8c57,0x85510443,0xfa020ed1,
-	0x7e287aff,0xe60fb663,0x095f35a1,0x79ebf120,
-	0xfd059d43,0x6497b7b1,0xf3641f63,0x241e4adf,
-	0x28147f5f,0x4fa2b8cd,0xc9430040,0x0cc32220,
-	0xfdd30b30,0xc0a5374f,0x1d2d00d9,0x24147b15,
-	0xee4d111a,0x0fca5167,0x71ff904c,0x2d195ffe,
-	0x1a05645f,0x0c13fefe,0x081b08ca,0x05170121,
-	0x80530100,0xe83e5efe,0xac9af4f8,0x7fe72701,
-	0xd2b8ee5f,0x06df4261,0xbb9e9b8a,0x7293ea25,
-	0xce84ffdf,0xf5718801,0x3dd64b04,0xa26f263b,
-	0x7ed48400,0x547eebe6,0x446d4ca0,0x6cf3d6f5,
-	0x2649abdf,0xaea0c7f5,0x36338cc1,0x503f7e93,
-	0xd3772061,0x11b638e1,0x72500e03,0xf80eb2bb,
-	0xabe0502e,0xec8d77de,0x57971e81,0xe14f6746,
-	0xc9335400,0x6920318f,0x081dbb99,0xffc304a5,
-	0x4d351805,0x7f3d5ce3,0xa6c866c6,0x5d5bcca9,
-	0xdaec6fea,0x9f926f91,0x9f46222f,0x3991467d,
-	0xa5bf6d8e,0x1143c44f,0x43958302,0xd0214eeb,
-	0x022083b8,0x3fb6180c,0x18f8931e,0x281658e6,
-	0x26486e3e,0x8bd78a70,0x7477e4c1,0xb506e07c,
-	0xf32d0a25,0x79098b02,0xe4eabb81,0x28123b23,
-	0x69dead38,0x1574ca16,0xdf871b62,0x211c40b7,
-	0xa51a9ef9,0x0014377b,0x041e8ac8,0x09114003,
-	0xbd59e4d2,0xe3d156d5,0x4fe876d5,0x2f91a340,
-	0x557be8de,0x00eae4a7,0x0ce5c2ec,0x4db4bba6,
-	0xe756bdff,0xdd3369ac,0xec17b035,0x06572327,
-	0x99afc8b0,0x56c8c391,0x6b65811c,0x5e146119,
-	0x6e85cb75,0xbe07c002,0xc2325577,0x893ff4ec,
-	0x5bbfc92d,0xd0ec3b25,0xb7801ab7,0x8d6d3b24,
-	0x20c763ef,0xc366a5fc,0x9c382880,0x0ace3205,
-	0xaac9548a,0xeca1d7c7,0x041afa32,0x1d16625a,
-	0x6701902c,0x9b757a54,0x31d477f7,0x9126b031,
-	0x36cc6fdb,0xc70b8b46,0xd9e66a48,0x56e55a79,
-	0x026a4ceb,0x52437eff,0x2f8f76b4,0x0df980a5,
-	0x8674cde3,0xedda04eb,0x17a9be04,0x2c18f4df,
-	0xb7747f9d,0xab2af7b4,0xefc34d20,0x2e096b7c,
-	0x1741a254,0xe5b6a035,0x213d42f6,0x2c1c7c26,
-	0x61c2f50f,0x6552daf9,0xd2c231f8,0x25130f69,
-	0xd8167fa2,0x0418f2c8,0x001a96a6,0x0d1526ab,
-	0x63315c21,0x5e0a72ec,0x49bafefd,0x187908d9,
-	0x8d0dbd86,0x311170a7,0x3e9b640c,0xcc3e10d7,
-	0xd5cad3b6,0x0caec388,0xf73001e1,0x6c728aff,
-	0x71eae2a1,0x1f9af36e,0xcfcbd12f,0xc1de8417,
-	0xac07be6b,0xcb44a1d8,0x8b9b0f56,0x013988c3,
-	0xb1c52fca,0xb4be31cd,0xd8782806,0x12a3a4e2,
-	0x6f7de532,0x58fd7eb6,0xd01ee900,0x24adffc2,
-	0xf4990fc5,0x9711aac5,0x001d7b95,0x82e5e7d2,
-	0x109873f6,0x00613096,0xc32d9521,0xada121ff,
-	0x29908415,0x7fbb977f,0xaf9eb3db,0x29c9ed2a,
-	0x5ce2a465,0xa730f32c,0xd0aa3fe8,0x8a5cc091,
-	0xd49e2ce7,0x0ce454a9,0xd60acd86,0x015f1919,
-	0x77079103,0xdea03af6,0x78a8565e,0xdee356df,
-	0x21f05cbe,0x8b75e387,0xb3c50651,0xb8a5c3ef,
-	0xd8eeb6d2,0xe523be77,0xc2154529,0x2f69efdf,
-	0xafe67afb,0xf470c4b2,0xf3e0eb5b,0xd6cc9876,
-	0x39e4460c,0x1fda8538,0x1987832f,0xca007367,
-	0xa99144f8,0x296b299e,0x492fc295,0x9266beab,
-	0xb5676e69,0x9bd3ddda,0xdf7e052f,0xdb25701c,
-	0x1b5e51ee,0xf65324e6,0x6afce36c,0x0316cc04,
-	0x8644213e,0xb7dc59d0,0x7965291f,0xccd6fd43,
-	0x41823979,0x932bcdf6,0xb657c34d,0x4edfd282,
-	0x7ae5290c,0x3cb9536b,0x851e20fe,0x9833557e,
-	0x13ecf0b0,0xd3ffb372,0x3f85c5c1,0x0aef7ed2,
-	};
-OPENSSL_GLOBAL const CAST_LONG CAST_S_table4[256]={
-	0x7ec90c04,0x2c6e74b9,0x9b0e66df,0xa6337911,
-	0xb86a7fff,0x1dd358f5,0x44dd9d44,0x1731167f,
-	0x08fbf1fa,0xe7f511cc,0xd2051b00,0x735aba00,
-	0x2ab722d8,0x386381cb,0xacf6243a,0x69befd7a,
-	0xe6a2e77f,0xf0c720cd,0xc4494816,0xccf5c180,
-	0x38851640,0x15b0a848,0xe68b18cb,0x4caadeff,
-	0x5f480a01,0x0412b2aa,0x259814fc,0x41d0efe2,
-	0x4e40b48d,0x248eb6fb,0x8dba1cfe,0x41a99b02,
-	0x1a550a04,0xba8f65cb,0x7251f4e7,0x95a51725,
-	0xc106ecd7,0x97a5980a,0xc539b9aa,0x4d79fe6a,
-	0xf2f3f763,0x68af8040,0xed0c9e56,0x11b4958b,
-	0xe1eb5a88,0x8709e6b0,0xd7e07156,0x4e29fea7,
-	0x6366e52d,0x02d1c000,0xc4ac8e05,0x9377f571,
-	0x0c05372a,0x578535f2,0x2261be02,0xd642a0c9,
-	0xdf13a280,0x74b55bd2,0x682199c0,0xd421e5ec,
-	0x53fb3ce8,0xc8adedb3,0x28a87fc9,0x3d959981,
-	0x5c1ff900,0xfe38d399,0x0c4eff0b,0x062407ea,
-	0xaa2f4fb1,0x4fb96976,0x90c79505,0xb0a8a774,
-	0xef55a1ff,0xe59ca2c2,0xa6b62d27,0xe66a4263,
-	0xdf65001f,0x0ec50966,0xdfdd55bc,0x29de0655,
-	0x911e739a,0x17af8975,0x32c7911c,0x89f89468,
-	0x0d01e980,0x524755f4,0x03b63cc9,0x0cc844b2,
-	0xbcf3f0aa,0x87ac36e9,0xe53a7426,0x01b3d82b,
-	0x1a9e7449,0x64ee2d7e,0xcddbb1da,0x01c94910,
-	0xb868bf80,0x0d26f3fd,0x9342ede7,0x04a5c284,
-	0x636737b6,0x50f5b616,0xf24766e3,0x8eca36c1,
-	0x136e05db,0xfef18391,0xfb887a37,0xd6e7f7d4,
-	0xc7fb7dc9,0x3063fcdf,0xb6f589de,0xec2941da,
-	0x26e46695,0xb7566419,0xf654efc5,0xd08d58b7,
-	0x48925401,0xc1bacb7f,0xe5ff550f,0xb6083049,
-	0x5bb5d0e8,0x87d72e5a,0xab6a6ee1,0x223a66ce,
-	0xc62bf3cd,0x9e0885f9,0x68cb3e47,0x086c010f,
-	0xa21de820,0xd18b69de,0xf3f65777,0xfa02c3f6,
-	0x407edac3,0xcbb3d550,0x1793084d,0xb0d70eba,
-	0x0ab378d5,0xd951fb0c,0xded7da56,0x4124bbe4,
-	0x94ca0b56,0x0f5755d1,0xe0e1e56e,0x6184b5be,
-	0x580a249f,0x94f74bc0,0xe327888e,0x9f7b5561,
-	0xc3dc0280,0x05687715,0x646c6bd7,0x44904db3,
-	0x66b4f0a3,0xc0f1648a,0x697ed5af,0x49e92ff6,
-	0x309e374f,0x2cb6356a,0x85808573,0x4991f840,
-	0x76f0ae02,0x083be84d,0x28421c9a,0x44489406,
-	0x736e4cb8,0xc1092910,0x8bc95fc6,0x7d869cf4,
-	0x134f616f,0x2e77118d,0xb31b2be1,0xaa90b472,
-	0x3ca5d717,0x7d161bba,0x9cad9010,0xaf462ba2,
-	0x9fe459d2,0x45d34559,0xd9f2da13,0xdbc65487,
-	0xf3e4f94e,0x176d486f,0x097c13ea,0x631da5c7,
-	0x445f7382,0x175683f4,0xcdc66a97,0x70be0288,
-	0xb3cdcf72,0x6e5dd2f3,0x20936079,0x459b80a5,
-	0xbe60e2db,0xa9c23101,0xeba5315c,0x224e42f2,
-	0x1c5c1572,0xf6721b2c,0x1ad2fff3,0x8c25404e,
-	0x324ed72f,0x4067b7fd,0x0523138e,0x5ca3bc78,
-	0xdc0fd66e,0x75922283,0x784d6b17,0x58ebb16e,
-	0x44094f85,0x3f481d87,0xfcfeae7b,0x77b5ff76,
-	0x8c2302bf,0xaaf47556,0x5f46b02a,0x2b092801,
-	0x3d38f5f7,0x0ca81f36,0x52af4a8a,0x66d5e7c0,
-	0xdf3b0874,0x95055110,0x1b5ad7a8,0xf61ed5ad,
-	0x6cf6e479,0x20758184,0xd0cefa65,0x88f7be58,
-	0x4a046826,0x0ff6f8f3,0xa09c7f70,0x5346aba0,
-	0x5ce96c28,0xe176eda3,0x6bac307f,0x376829d2,
-	0x85360fa9,0x17e3fe2a,0x24b79767,0xf5a96b20,
-	0xd6cd2595,0x68ff1ebf,0x7555442c,0xf19f06be,
-	0xf9e0659a,0xeeb9491d,0x34010718,0xbb30cab8,
-	0xe822fe15,0x88570983,0x750e6249,0xda627e55,
-	0x5e76ffa8,0xb1534546,0x6d47de08,0xefe9e7d4,
-	};
-OPENSSL_GLOBAL const CAST_LONG CAST_S_table5[256]={
-	0xf6fa8f9d,0x2cac6ce1,0x4ca34867,0xe2337f7c,
-	0x95db08e7,0x016843b4,0xeced5cbc,0x325553ac,
-	0xbf9f0960,0xdfa1e2ed,0x83f0579d,0x63ed86b9,
-	0x1ab6a6b8,0xde5ebe39,0xf38ff732,0x8989b138,
-	0x33f14961,0xc01937bd,0xf506c6da,0xe4625e7e,
-	0xa308ea99,0x4e23e33c,0x79cbd7cc,0x48a14367,
-	0xa3149619,0xfec94bd5,0xa114174a,0xeaa01866,
-	0xa084db2d,0x09a8486f,0xa888614a,0x2900af98,
-	0x01665991,0xe1992863,0xc8f30c60,0x2e78ef3c,
-	0xd0d51932,0xcf0fec14,0xf7ca07d2,0xd0a82072,
-	0xfd41197e,0x9305a6b0,0xe86be3da,0x74bed3cd,
-	0x372da53c,0x4c7f4448,0xdab5d440,0x6dba0ec3,
-	0x083919a7,0x9fbaeed9,0x49dbcfb0,0x4e670c53,
-	0x5c3d9c01,0x64bdb941,0x2c0e636a,0xba7dd9cd,
-	0xea6f7388,0xe70bc762,0x35f29adb,0x5c4cdd8d,
-	0xf0d48d8c,0xb88153e2,0x08a19866,0x1ae2eac8,
-	0x284caf89,0xaa928223,0x9334be53,0x3b3a21bf,
-	0x16434be3,0x9aea3906,0xefe8c36e,0xf890cdd9,
-	0x80226dae,0xc340a4a3,0xdf7e9c09,0xa694a807,
-	0x5b7c5ecc,0x221db3a6,0x9a69a02f,0x68818a54,
-	0xceb2296f,0x53c0843a,0xfe893655,0x25bfe68a,
-	0xb4628abc,0xcf222ebf,0x25ac6f48,0xa9a99387,
-	0x53bddb65,0xe76ffbe7,0xe967fd78,0x0ba93563,
-	0x8e342bc1,0xe8a11be9,0x4980740d,0xc8087dfc,
-	0x8de4bf99,0xa11101a0,0x7fd37975,0xda5a26c0,
-	0xe81f994f,0x9528cd89,0xfd339fed,0xb87834bf,
-	0x5f04456d,0x22258698,0xc9c4c83b,0x2dc156be,
-	0x4f628daa,0x57f55ec5,0xe2220abe,0xd2916ebf,
-	0x4ec75b95,0x24f2c3c0,0x42d15d99,0xcd0d7fa0,
-	0x7b6e27ff,0xa8dc8af0,0x7345c106,0xf41e232f,
-	0x35162386,0xe6ea8926,0x3333b094,0x157ec6f2,
-	0x372b74af,0x692573e4,0xe9a9d848,0xf3160289,
-	0x3a62ef1d,0xa787e238,0xf3a5f676,0x74364853,
-	0x20951063,0x4576698d,0xb6fad407,0x592af950,
-	0x36f73523,0x4cfb6e87,0x7da4cec0,0x6c152daa,
-	0xcb0396a8,0xc50dfe5d,0xfcd707ab,0x0921c42f,
-	0x89dff0bb,0x5fe2be78,0x448f4f33,0x754613c9,
-	0x2b05d08d,0x48b9d585,0xdc049441,0xc8098f9b,
-	0x7dede786,0xc39a3373,0x42410005,0x6a091751,
-	0x0ef3c8a6,0x890072d6,0x28207682,0xa9a9f7be,
-	0xbf32679d,0xd45b5b75,0xb353fd00,0xcbb0e358,
-	0x830f220a,0x1f8fb214,0xd372cf08,0xcc3c4a13,
-	0x8cf63166,0x061c87be,0x88c98f88,0x6062e397,
-	0x47cf8e7a,0xb6c85283,0x3cc2acfb,0x3fc06976,
-	0x4e8f0252,0x64d8314d,0xda3870e3,0x1e665459,
-	0xc10908f0,0x513021a5,0x6c5b68b7,0x822f8aa0,
-	0x3007cd3e,0x74719eef,0xdc872681,0x073340d4,
-	0x7e432fd9,0x0c5ec241,0x8809286c,0xf592d891,
-	0x08a930f6,0x957ef305,0xb7fbffbd,0xc266e96f,
-	0x6fe4ac98,0xb173ecc0,0xbc60b42a,0x953498da,
-	0xfba1ae12,0x2d4bd736,0x0f25faab,0xa4f3fceb,
-	0xe2969123,0x257f0c3d,0x9348af49,0x361400bc,
-	0xe8816f4a,0x3814f200,0xa3f94043,0x9c7a54c2,
-	0xbc704f57,0xda41e7f9,0xc25ad33a,0x54f4a084,
-	0xb17f5505,0x59357cbe,0xedbd15c8,0x7f97c5ab,
-	0xba5ac7b5,0xb6f6deaf,0x3a479c3a,0x5302da25,
-	0x653d7e6a,0x54268d49,0x51a477ea,0x5017d55b,
-	0xd7d25d88,0x44136c76,0x0404a8c8,0xb8e5a121,
-	0xb81a928a,0x60ed5869,0x97c55b96,0xeaec991b,
-	0x29935913,0x01fdb7f1,0x088e8dfa,0x9ab6f6f5,
-	0x3b4cbf9f,0x4a5de3ab,0xe6051d35,0xa0e1d855,
-	0xd36b4cf1,0xf544edeb,0xb0e93524,0xbebb8fbd,
-	0xa2d762cf,0x49c92f54,0x38b5f331,0x7128a454,
-	0x48392905,0xa65b1db8,0x851c97bd,0xd675cf2f,
-	};
-OPENSSL_GLOBAL const CAST_LONG CAST_S_table6[256]={
-	0x85e04019,0x332bf567,0x662dbfff,0xcfc65693,
-	0x2a8d7f6f,0xab9bc912,0xde6008a1,0x2028da1f,
-	0x0227bce7,0x4d642916,0x18fac300,0x50f18b82,
-	0x2cb2cb11,0xb232e75c,0x4b3695f2,0xb28707de,
-	0xa05fbcf6,0xcd4181e9,0xe150210c,0xe24ef1bd,
-	0xb168c381,0xfde4e789,0x5c79b0d8,0x1e8bfd43,
-	0x4d495001,0x38be4341,0x913cee1d,0x92a79c3f,
-	0x089766be,0xbaeeadf4,0x1286becf,0xb6eacb19,
-	0x2660c200,0x7565bde4,0x64241f7a,0x8248dca9,
-	0xc3b3ad66,0x28136086,0x0bd8dfa8,0x356d1cf2,
-	0x107789be,0xb3b2e9ce,0x0502aa8f,0x0bc0351e,
-	0x166bf52a,0xeb12ff82,0xe3486911,0xd34d7516,
-	0x4e7b3aff,0x5f43671b,0x9cf6e037,0x4981ac83,
-	0x334266ce,0x8c9341b7,0xd0d854c0,0xcb3a6c88,
-	0x47bc2829,0x4725ba37,0xa66ad22b,0x7ad61f1e,
-	0x0c5cbafa,0x4437f107,0xb6e79962,0x42d2d816,
-	0x0a961288,0xe1a5c06e,0x13749e67,0x72fc081a,
-	0xb1d139f7,0xf9583745,0xcf19df58,0xbec3f756,
-	0xc06eba30,0x07211b24,0x45c28829,0xc95e317f,
-	0xbc8ec511,0x38bc46e9,0xc6e6fa14,0xbae8584a,
-	0xad4ebc46,0x468f508b,0x7829435f,0xf124183b,
-	0x821dba9f,0xaff60ff4,0xea2c4e6d,0x16e39264,
-	0x92544a8b,0x009b4fc3,0xaba68ced,0x9ac96f78,
-	0x06a5b79a,0xb2856e6e,0x1aec3ca9,0xbe838688,
-	0x0e0804e9,0x55f1be56,0xe7e5363b,0xb3a1f25d,
-	0xf7debb85,0x61fe033c,0x16746233,0x3c034c28,
-	0xda6d0c74,0x79aac56c,0x3ce4e1ad,0x51f0c802,
-	0x98f8f35a,0x1626a49f,0xeed82b29,0x1d382fe3,
-	0x0c4fb99a,0xbb325778,0x3ec6d97b,0x6e77a6a9,
-	0xcb658b5c,0xd45230c7,0x2bd1408b,0x60c03eb7,
-	0xb9068d78,0xa33754f4,0xf430c87d,0xc8a71302,
-	0xb96d8c32,0xebd4e7be,0xbe8b9d2d,0x7979fb06,
-	0xe7225308,0x8b75cf77,0x11ef8da4,0xe083c858,
-	0x8d6b786f,0x5a6317a6,0xfa5cf7a0,0x5dda0033,
-	0xf28ebfb0,0xf5b9c310,0xa0eac280,0x08b9767a,
-	0xa3d9d2b0,0x79d34217,0x021a718d,0x9ac6336a,
-	0x2711fd60,0x438050e3,0x069908a8,0x3d7fedc4,
-	0x826d2bef,0x4eeb8476,0x488dcf25,0x36c9d566,
-	0x28e74e41,0xc2610aca,0x3d49a9cf,0xbae3b9df,
-	0xb65f8de6,0x92aeaf64,0x3ac7d5e6,0x9ea80509,
-	0xf22b017d,0xa4173f70,0xdd1e16c3,0x15e0d7f9,
-	0x50b1b887,0x2b9f4fd5,0x625aba82,0x6a017962,
-	0x2ec01b9c,0x15488aa9,0xd716e740,0x40055a2c,
-	0x93d29a22,0xe32dbf9a,0x058745b9,0x3453dc1e,
-	0xd699296e,0x496cff6f,0x1c9f4986,0xdfe2ed07,
-	0xb87242d1,0x19de7eae,0x053e561a,0x15ad6f8c,
-	0x66626c1c,0x7154c24c,0xea082b2a,0x93eb2939,
-	0x17dcb0f0,0x58d4f2ae,0x9ea294fb,0x52cf564c,
-	0x9883fe66,0x2ec40581,0x763953c3,0x01d6692e,
-	0xd3a0c108,0xa1e7160e,0xe4f2dfa6,0x693ed285,
-	0x74904698,0x4c2b0edd,0x4f757656,0x5d393378,
-	0xa132234f,0x3d321c5d,0xc3f5e194,0x4b269301,
-	0xc79f022f,0x3c997e7e,0x5e4f9504,0x3ffafbbd,
-	0x76f7ad0e,0x296693f4,0x3d1fce6f,0xc61e45be,
-	0xd3b5ab34,0xf72bf9b7,0x1b0434c0,0x4e72b567,
-	0x5592a33d,0xb5229301,0xcfd2a87f,0x60aeb767,
-	0x1814386b,0x30bcc33d,0x38a0c07d,0xfd1606f2,
-	0xc363519b,0x589dd390,0x5479f8e6,0x1cb8d647,
-	0x97fd61a9,0xea7759f4,0x2d57539d,0x569a58cf,
-	0xe84e63ad,0x462e1b78,0x6580f87e,0xf3817914,
-	0x91da55f4,0x40a230f3,0xd1988f35,0xb6e318d2,
-	0x3ffa50bc,0x3d40f021,0xc3c0bdae,0x4958c24c,
-	0x518f36b2,0x84b1d370,0x0fedce83,0x878ddada,
-	0xf2a279c7,0x94e01be8,0x90716f4b,0x954b8aa3,
-	};
-OPENSSL_GLOBAL const CAST_LONG CAST_S_table7[256]={
-	0xe216300d,0xbbddfffc,0xa7ebdabd,0x35648095,
-	0x7789f8b7,0xe6c1121b,0x0e241600,0x052ce8b5,
-	0x11a9cfb0,0xe5952f11,0xece7990a,0x9386d174,
-	0x2a42931c,0x76e38111,0xb12def3a,0x37ddddfc,
-	0xde9adeb1,0x0a0cc32c,0xbe197029,0x84a00940,
-	0xbb243a0f,0xb4d137cf,0xb44e79f0,0x049eedfd,
-	0x0b15a15d,0x480d3168,0x8bbbde5a,0x669ded42,
-	0xc7ece831,0x3f8f95e7,0x72df191b,0x7580330d,
-	0x94074251,0x5c7dcdfa,0xabbe6d63,0xaa402164,
-	0xb301d40a,0x02e7d1ca,0x53571dae,0x7a3182a2,
-	0x12a8ddec,0xfdaa335d,0x176f43e8,0x71fb46d4,
-	0x38129022,0xce949ad4,0xb84769ad,0x965bd862,
-	0x82f3d055,0x66fb9767,0x15b80b4e,0x1d5b47a0,
-	0x4cfde06f,0xc28ec4b8,0x57e8726e,0x647a78fc,
-	0x99865d44,0x608bd593,0x6c200e03,0x39dc5ff6,
-	0x5d0b00a3,0xae63aff2,0x7e8bd632,0x70108c0c,
-	0xbbd35049,0x2998df04,0x980cf42a,0x9b6df491,
-	0x9e7edd53,0x06918548,0x58cb7e07,0x3b74ef2e,
-	0x522fffb1,0xd24708cc,0x1c7e27cd,0xa4eb215b,
-	0x3cf1d2e2,0x19b47a38,0x424f7618,0x35856039,
-	0x9d17dee7,0x27eb35e6,0xc9aff67b,0x36baf5b8,
-	0x09c467cd,0xc18910b1,0xe11dbf7b,0x06cd1af8,
-	0x7170c608,0x2d5e3354,0xd4de495a,0x64c6d006,
-	0xbcc0c62c,0x3dd00db3,0x708f8f34,0x77d51b42,
-	0x264f620f,0x24b8d2bf,0x15c1b79e,0x46a52564,
-	0xf8d7e54e,0x3e378160,0x7895cda5,0x859c15a5,
-	0xe6459788,0xc37bc75f,0xdb07ba0c,0x0676a3ab,
-	0x7f229b1e,0x31842e7b,0x24259fd7,0xf8bef472,
-	0x835ffcb8,0x6df4c1f2,0x96f5b195,0xfd0af0fc,
-	0xb0fe134c,0xe2506d3d,0x4f9b12ea,0xf215f225,
-	0xa223736f,0x9fb4c428,0x25d04979,0x34c713f8,
-	0xc4618187,0xea7a6e98,0x7cd16efc,0x1436876c,
-	0xf1544107,0xbedeee14,0x56e9af27,0xa04aa441,
-	0x3cf7c899,0x92ecbae6,0xdd67016d,0x151682eb,
-	0xa842eedf,0xfdba60b4,0xf1907b75,0x20e3030f,
-	0x24d8c29e,0xe139673b,0xefa63fb8,0x71873054,
-	0xb6f2cf3b,0x9f326442,0xcb15a4cc,0xb01a4504,
-	0xf1e47d8d,0x844a1be5,0xbae7dfdc,0x42cbda70,
-	0xcd7dae0a,0x57e85b7a,0xd53f5af6,0x20cf4d8c,
-	0xcea4d428,0x79d130a4,0x3486ebfb,0x33d3cddc,
-	0x77853b53,0x37effcb5,0xc5068778,0xe580b3e6,
-	0x4e68b8f4,0xc5c8b37e,0x0d809ea2,0x398feb7c,
-	0x132a4f94,0x43b7950e,0x2fee7d1c,0x223613bd,
-	0xdd06caa2,0x37df932b,0xc4248289,0xacf3ebc3,
-	0x5715f6b7,0xef3478dd,0xf267616f,0xc148cbe4,
-	0x9052815e,0x5e410fab,0xb48a2465,0x2eda7fa4,
-	0xe87b40e4,0xe98ea084,0x5889e9e1,0xefd390fc,
-	0xdd07d35b,0xdb485694,0x38d7e5b2,0x57720101,
-	0x730edebc,0x5b643113,0x94917e4f,0x503c2fba,
-	0x646f1282,0x7523d24a,0xe0779695,0xf9c17a8f,
-	0x7a5b2121,0xd187b896,0x29263a4d,0xba510cdf,
-	0x81f47c9f,0xad1163ed,0xea7b5965,0x1a00726e,
-	0x11403092,0x00da6d77,0x4a0cdd61,0xad1f4603,
-	0x605bdfb0,0x9eedc364,0x22ebe6a8,0xcee7d28a,
-	0xa0e736a0,0x5564a6b9,0x10853209,0xc7eb8f37,
-	0x2de705ca,0x8951570f,0xdf09822b,0xbd691a6c,
-	0xaa12e4f2,0x87451c0f,0xe0f6a27a,0x3ada4819,
-	0x4cf1764f,0x0d771c2b,0x67cdb156,0x350d8384,
-	0x5938fa0f,0x42399ef3,0x36997b07,0x0e84093d,
-	0x4aa93e61,0x8360d87b,0x1fa98b0c,0x1149382c,
-	0xe97625a5,0x0614d1b7,0x0e25244b,0x0c768347,
-	0x589e8d82,0x0d2059d1,0xa466bb1e,0xf8da0a82,
-	0x04f19130,0xba6e4ec0,0x99265164,0x1ee7230d,
-	0x50b2ad80,0xeaee6801,0x8db2a283,0xea8bf59e,
-	};
diff --git a/crypto/openssl/crypto/cast/cast_spd.c b/crypto/openssl/crypto/cast/cast_spd.c
deleted file mode 100644
index d650af475c3b..000000000000
--- a/crypto/openssl/crypto/cast/cast_spd.c
+++ /dev/null
@@ -1,278 +0,0 @@
-/* crypto/cast/cast_spd.c */
-/* Copyright (C) 1995-1998 Eric Young (eay@cryptsoft.com)
- * All rights reserved.
- *
- * This package is an SSL implementation written
- * by Eric Young (eay@cryptsoft.com).
- * The implementation was written so as to conform with Netscapes SSL.
- * 
- * This library is free for commercial and non-commercial use as long as
- * the following conditions are aheared to.  The following conditions
- * apply to all code found in this distribution, be it the RC4, RSA,
- * lhash, DES, etc., code; not just the SSL code.  The SSL documentation
- * included with this distribution is covered by the same copyright terms
- * except that the holder is Tim Hudson (tjh@cryptsoft.com).
- * 
- * Copyright remains Eric Young's, and as such any Copyright notices in
- * the code are not to be removed.
- * If this package is used in a product, Eric Young should be given attribution
- * as the author of the parts of the library used.
- * This can be in the form of a textual message at program startup or
- * in documentation (online or textual) provided with the package.
- * 
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions
- * are met:
- * 1. Redistributions of source code must retain the copyright
- *    notice, this list of conditions and the following disclaimer.
- * 2. Redistributions in binary form must reproduce the above copyright
- *    notice, this list of conditions and the following disclaimer in the
- *    documentation and/or other materials provided with the distribution.
- * 3. All advertising materials mentioning features or use of this software
- *    must display the following acknowledgement:
- *    "This product includes cryptographic software written by
- *     Eric Young (eay@cryptsoft.com)"
- *    The word 'cryptographic' can be left out if the rouines from the library
- *    being used are not cryptographic related :-).
- * 4. If you include any Windows specific code (or a derivative thereof) from 
- *    the apps directory (application code) you must include an acknowledgement:
- *    "This product includes software written by Tim Hudson (tjh@cryptsoft.com)"
- * 
- * THIS SOFTWARE IS PROVIDED BY ERIC YOUNG ``AS IS'' AND
- * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
- * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
- * ARE DISCLAIMED.  IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE
- * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
- * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
- * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
- * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
- * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
- * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
- * SUCH DAMAGE.
- * 
- * The licence and distribution terms for any publically available version or
- * derivative of this code cannot be changed.  i.e. this code cannot simply be
- * copied and put under another distribution licence
- * [including the GNU Public Licence.]
- */
-
-/* 11-Sep-92 Andrew Daviel   Support for Silicon Graphics IRIX added */
-/* 06-Apr-92 Luke Brennan    Support for VMS and add extra signal calls */
-
-#if !defined(OPENSSL_SYS_MSDOS) && (!defined(OPENSSL_SYS_VMS) || defined(__DECC)) && !defined(OPENSSL_SYS_MACOSX)
-#define TIMES
-#endif
-
-#include <stdio.h>
-
-#include <openssl/e_os2.h>
-#include OPENSSL_UNISTD_IO
-OPENSSL_DECLARE_EXIT
-
-#ifndef OPENSSL_SYS_NETWARE
-#include <signal.h>
-#endif
-
-#ifndef _IRIX
-#include <time.h>
-#endif
-#ifdef TIMES
-#include <sys/types.h>
-#include <sys/times.h>
-#endif
-
-/* Depending on the VMS version, the tms structure is perhaps defined.
-   The __TMS macro will show if it was.  If it wasn't defined, we should
-   undefine TIMES, since that tells the rest of the program how things
-   should be handled.				-- Richard Levitte */
-#if defined(OPENSSL_SYS_VMS_DECC) && !defined(__TMS)
-#undef TIMES
-#endif
-
-#ifndef TIMES
-#include <sys/timeb.h>
-#endif
-
-#if defined(sun) || defined(__ultrix)
-#define _POSIX_SOURCE
-#include <limits.h>
-#include <sys/param.h>
-#endif
-
-#include <openssl/cast.h>
-
-/* The following if from times(3) man page.  It may need to be changed */
-#ifndef HZ
-#ifndef CLK_TCK
-#define HZ	100.0
-#else /* CLK_TCK */
-#define HZ ((double)CLK_TCK)
-#endif
-#endif
-
-#define BUFSIZE	((long)1024)
-long run=0;
-
-double Time_F(int s);
-#ifdef SIGALRM
-#if defined(__STDC__) || defined(sgi) || defined(_AIX)
-#define SIGRETTYPE void
-#else
-#define SIGRETTYPE int
-#endif
-
-SIGRETTYPE sig_done(int sig);
-SIGRETTYPE sig_done(int sig)
-	{
-	signal(SIGALRM,sig_done);
-	run=0;
-#ifdef LINT
-	sig=sig;
-#endif
-	}
-#endif
-
-#define START	0
-#define STOP	1
-
-double Time_F(int s)
-	{
-	double ret;
-#ifdef TIMES
-	static struct tms tstart,tend;
-
-	if (s == START)
-		{
-		times(&tstart);
-		return(0);
-		}
-	else
-		{
-		times(&tend);
-		ret=((double)(tend.tms_utime-tstart.tms_utime))/HZ;
-		return((ret == 0.0)?1e-6:ret);
-		}
-#else /* !times() */
-	static struct timeb tstart,tend;
-	long i;
-
-	if (s == START)
-		{
-		ftime(&tstart);
-		return(0);
-		}
-	else
-		{
-		ftime(&tend);
-		i=(long)tend.millitm-(long)tstart.millitm;
-		ret=((double)(tend.time-tstart.time))+((double)i)/1e3;
-		return((ret == 0.0)?1e-6:ret);
-		}
-#endif
-	}
-
-int main(int argc, char **argv)
-	{
-	long count;
-	static unsigned char buf[BUFSIZE];
-	static unsigned char key[] ={
-			0x12,0x34,0x56,0x78,0x9a,0xbc,0xde,0xf0,
-			0xfe,0xdc,0xba,0x98,0x76,0x54,0x32,0x10,
-			};
-	CAST_KEY sch;
-	double a,b,c,d;
-#ifndef SIGALRM
-	long ca,cb,cc;
-#endif
-
-#ifndef TIMES
-	printf("To get the most accurate results, try to run this\n");
-	printf("program when this computer is idle.\n");
-#endif
-
-#ifndef SIGALRM
-	printf("First we calculate the approximate speed ...\n");
-	CAST_set_key(&sch,16,key);
-	count=10;
-	do	{
-		long i;
-		CAST_LONG data[2];
-
-		count*=2;
-		Time_F(START);
-		for (i=count; i; i--)
-			CAST_encrypt(data,&sch);
-		d=Time_F(STOP);
-		} while (d < 3.0);
-	ca=count/512;
-	cb=count;
-	cc=count*8/BUFSIZE+1;
-	printf("Doing CAST_set_key %ld times\n",ca);
-#define COND(d)	(count != (d))
-#define COUNT(d) (d)
-#else
-#define COND(c)	(run)
-#define COUNT(d) (count)
-	signal(SIGALRM,sig_done);
-	printf("Doing CAST_set_key for 10 seconds\n");
-	alarm(10);
-#endif
-
-	Time_F(START);
-	for (count=0,run=1; COND(ca); count+=4)
-		{
-		CAST_set_key(&sch,16,key);
-		CAST_set_key(&sch,16,key);
-		CAST_set_key(&sch,16,key);
-		CAST_set_key(&sch,16,key);
-		}
-	d=Time_F(STOP);
-	printf("%ld cast set_key's in %.2f seconds\n",count,d);
-	a=((double)COUNT(ca))/d;
-
-#ifdef SIGALRM
-	printf("Doing CAST_encrypt's for 10 seconds\n");
-	alarm(10);
-#else
-	printf("Doing CAST_encrypt %ld times\n",cb);
-#endif
-	Time_F(START);
-	for (count=0,run=1; COND(cb); count+=4)
-		{
-		CAST_LONG data[2];
-
-		CAST_encrypt(data,&sch);
-		CAST_encrypt(data,&sch);
-		CAST_encrypt(data,&sch);
-		CAST_encrypt(data,&sch);
-		}
-	d=Time_F(STOP);
-	printf("%ld CAST_encrypt's in %.2f second\n",count,d);
-	b=((double)COUNT(cb)*8)/d;
-
-#ifdef SIGALRM
-	printf("Doing CAST_cbc_encrypt on %ld byte blocks for 10 seconds\n",
-		BUFSIZE);
-	alarm(10);
-#else
-	printf("Doing CAST_cbc_encrypt %ld times on %ld byte blocks\n",cc,
-		BUFSIZE);
-#endif
-	Time_F(START);
-	for (count=0,run=1; COND(cc); count++)
-		CAST_cbc_encrypt(buf,buf,BUFSIZE,&sch,
-			&(key[0]),CAST_ENCRYPT);
-	d=Time_F(STOP);
-	printf("%ld CAST_cbc_encrypt's of %ld byte blocks in %.2f second\n",
-		count,BUFSIZE,d);
-	c=((double)COUNT(cc)*BUFSIZE)/d;
-
-	printf("CAST set_key       per sec = %12.2f (%9.3fuS)\n",a,1.0e6/a);
-	printf("CAST raw ecb bytes per sec = %12.2f (%9.3fuS)\n",b,8.0e6/b);
-	printf("CAST cbc     bytes per sec = %12.2f (%9.3fuS)\n",c,8.0e6/c);
-	exit(0);
-#if defined(LINT) || defined(OPENSSL_SYS_MSDOS)
-	return(0);
-#endif
-	}
-
diff --git a/crypto/openssl/crypto/cast/castopts.c b/crypto/openssl/crypto/cast/castopts.c
deleted file mode 100644
index 33b2c7b06fd7..000000000000
--- a/crypto/openssl/crypto/cast/castopts.c
+++ /dev/null
@@ -1,342 +0,0 @@
-/* crypto/cast/castopts.c */
-/* Copyright (C) 1995-1998 Eric Young (eay@cryptsoft.com)
- * All rights reserved.
- *
- * This package is an SSL implementation written
- * by Eric Young (eay@cryptsoft.com).
- * The implementation was written so as to conform with Netscapes SSL.
- * 
- * This library is free for commercial and non-commercial use as long as
- * the following conditions are aheared to.  The following conditions
- * apply to all code found in this distribution, be it the RC4, RSA,
- * lhash, DES, etc., code; not just the SSL code.  The SSL documentation
- * included with this distribution is covered by the same copyright terms
- * except that the holder is Tim Hudson (tjh@cryptsoft.com).
- * 
- * Copyright remains Eric Young's, and as such any Copyright notices in
- * the code are not to be removed.
- * If this package is used in a product, Eric Young should be given attribution
- * as the author of the parts of the library used.
- * This can be in the form of a textual message at program startup or
- * in documentation (online or textual) provided with the package.
- * 
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions
- * are met:
- * 1. Redistributions of source code must retain the copyright
- *    notice, this list of conditions and the following disclaimer.
- * 2. Redistributions in binary form must reproduce the above copyright
- *    notice, this list of conditions and the following disclaimer in the
- *    documentation and/or other materials provided with the distribution.
- * 3. All advertising materials mentioning features or use of this software
- *    must display the following acknowledgement:
- *    "This product includes cryptographic software written by
- *     Eric Young (eay@cryptsoft.com)"
- *    The word 'cryptographic' can be left out if the rouines from the library
- *    being used are not cryptographic related :-).
- * 4. If you include any Windows specific code (or a derivative thereof) from 
- *    the apps directory (application code) you must include an acknowledgement:
- *    "This product includes software written by Tim Hudson (tjh@cryptsoft.com)"
- * 
- * THIS SOFTWARE IS PROVIDED BY ERIC YOUNG ``AS IS'' AND
- * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
- * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
- * ARE DISCLAIMED.  IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE
- * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
- * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
- * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
- * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
- * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
- * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
- * SUCH DAMAGE.
- * 
- * The licence and distribution terms for any publically available version or
- * derivative of this code cannot be changed.  i.e. this code cannot simply be
- * copied and put under another distribution licence
- * [including the GNU Public Licence.]
- */
-
-/* define PART1, PART2, PART3 or PART4 to build only with a few of the options.
- * This is for machines with 64k code segment size restrictions. */
-
-#if !defined(OPENSSL_SYS_MSDOS) && (!defined(OPENSSL_SYS_VMS) || defined(__DECC))
-#define TIMES
-#endif
-
-#include <stdio.h>
-
-#include <openssl/e_os2.h>
-#include OPENSSL_UNISTD_IO
-OPENSSL_DECLARE_EXIT
-
-#ifndef OPENSSL_SYS_NETWARE
-#include <signal.h>
-#endif
-
-#ifndef _IRIX
-#include <time.h>
-#endif
-#ifdef TIMES
-#include <sys/types.h>
-#include <sys/times.h>
-#endif
-
-/* Depending on the VMS version, the tms structure is perhaps defined.
-   The __TMS macro will show if it was.  If it wasn't defined, we should
-   undefine TIMES, since that tells the rest of the program how things
-   should be handled.				-- Richard Levitte */
-#if defined(OPENSSL_SYS_VMS_DECC) && !defined(__TMS)
-#undef TIMES
-#endif
-
-#ifndef TIMES
-#include <sys/timeb.h>
-#endif
-
-#if defined(sun) || defined(__ultrix)
-#define _POSIX_SOURCE
-#include <limits.h>
-#include <sys/param.h>
-#endif
-
-#include <openssl/cast.h>
-
-#define CAST_DEFAULT_OPTIONS
-
-#undef E_CAST
-#define CAST_encrypt  CAST_encrypt_normal
-#define CAST_decrypt  CAST_decrypt_normal
-#define CAST_cbc_encrypt  CAST_cbc_encrypt_normal
-#undef HEADER_CAST_LOCL_H
-#include "c_enc.c"
-
-#define CAST_PTR
-#undef CAST_PTR2
-#undef E_CAST
-#undef CAST_encrypt
-#undef CAST_decrypt
-#undef CAST_cbc_encrypt
-#define CAST_encrypt  CAST_encrypt_ptr
-#define CAST_decrypt  CAST_decrypt_ptr
-#define CAST_cbc_encrypt  CAST_cbc_encrypt_ptr
-#undef HEADER_CAST_LOCL_H
-#include "c_enc.c"
-
-#undef CAST_PTR
-#define CAST_PTR2
-#undef E_CAST
-#undef CAST_encrypt
-#undef CAST_decrypt
-#undef CAST_cbc_encrypt
-#define CAST_encrypt  CAST_encrypt_ptr2
-#define CAST_decrypt  CAST_decrypt_ptr2
-#define CAST_cbc_encrypt  CAST_cbc_encrypt_ptr2
-#undef HEADER_CAST_LOCL_H
-#include "c_enc.c"
-
-/* The following if from times(3) man page.  It may need to be changed */
-#ifndef HZ
-# ifndef CLK_TCK
-#  ifndef _BSD_CLK_TCK_ /* FreeBSD fix */
-#   define HZ	100.0
-#  else /* _BSD_CLK_TCK_ */
-#   define HZ ((double)_BSD_CLK_TCK_)
-#  endif
-# else /* CLK_TCK */
-#  define HZ ((double)CLK_TCK)
-# endif
-#endif
-
-#define BUFSIZE	((long)1024)
-long run=0;
-
-double Time_F(int s);
-#ifdef SIGALRM
-#if defined(__STDC__) || defined(sgi)
-#define SIGRETTYPE void
-#else
-#define SIGRETTYPE int
-#endif
-
-SIGRETTYPE sig_done(int sig);
-SIGRETTYPE sig_done(int sig)
-	{
-	signal(SIGALRM,sig_done);
-	run=0;
-#ifdef LINT
-	sig=sig;
-#endif
-	}
-#endif
-
-#define START	0
-#define STOP	1
-
-double Time_F(int s)
-	{
-	double ret;
-#ifdef TIMES
-	static struct tms tstart,tend;
-
-	if (s == START)
-		{
-		times(&tstart);
-		return(0);
-		}
-	else
-		{
-		times(&tend);
-		ret=((double)(tend.tms_utime-tstart.tms_utime))/HZ;
-		return((ret == 0.0)?1e-6:ret);
-		}
-#else /* !times() */
-	static struct timeb tstart,tend;
-	long i;
-
-	if (s == START)
-		{
-		ftime(&tstart);
-		return(0);
-		}
-	else
-		{
-		ftime(&tend);
-		i=(long)tend.millitm-(long)tstart.millitm;
-		ret=((double)(tend.time-tstart.time))+((double)i)/1000.0;
-		return((ret == 0.0)?1e-6:ret);
-		}
-#endif
-	}
-
-#ifdef SIGALRM
-#define print_name(name) fprintf(stderr,"Doing %s's for 10 seconds\n",name); alarm(10);
-#else
-#define print_name(name) fprintf(stderr,"Doing %s %ld times\n",name,cb);
-#endif
-	
-#define time_it(func,name,index) \
-	print_name(name); \
-	Time_F(START); \
-	for (count=0,run=1; COND(cb); count+=4) \
-		{ \
-		unsigned long d[2]; \
-		func(d,&sch); \
-		func(d,&sch); \
-		func(d,&sch); \
-		func(d,&sch); \
-		} \
-	tm[index]=Time_F(STOP); \
-	fprintf(stderr,"%ld %s's in %.2f second\n",count,name,tm[index]); \
-	tm[index]=((double)COUNT(cb))/tm[index];
-
-#define print_it(name,index) \
-	fprintf(stderr,"%s bytes per sec = %12.2f (%5.1fuS)\n",name, \
-		tm[index]*8,1.0e6/tm[index]);
-
-int main(int argc, char **argv)
-	{
-	long count;
-	static unsigned char buf[BUFSIZE];
-	static char key[16]={	0x12,0x34,0x56,0x78,0x9a,0xbc,0xde,0xf0,
-				0x12,0x34,0x56,0x78,0x9a,0xbc,0xde,0xf0};
-	CAST_KEY sch;
-	double d,tm[16],max=0;
-	int rank[16];
-	char *str[16];
-	int max_idx=0,i,num=0,j;
-#ifndef SIGALARM
-	long ca,cb,cc,cd,ce;
-#endif
-
-	for (i=0; i<12; i++)
-		{
-		tm[i]=0.0;
-		rank[i]=0;
-		}
-
-#ifndef TIMES
-	fprintf(stderr,"To get the most accurate results, try to run this\n");
-	fprintf(stderr,"program when this computer is idle.\n");
-#endif
-
-	CAST_set_key(&sch,16,key);
-
-#ifndef SIGALRM
-	fprintf(stderr,"First we calculate the approximate speed ...\n");
-	count=10;
-	do	{
-		long i;
-		unsigned long data[2];
-
-		count*=2;
-		Time_F(START);
-		for (i=count; i; i--)
-			CAST_encrypt(data,&sch);
-		d=Time_F(STOP);
-		} while (d < 3.0);
-	ca=count;
-	cb=count*3;
-	cc=count*3*8/BUFSIZE+1;
-	cd=count*8/BUFSIZE+1;
-
-	ce=count/20+1;
-#define COND(d) (count != (d))
-#define COUNT(d) (d)
-#else
-#define COND(c) (run)
-#define COUNT(d) (count)
-        signal(SIGALRM,sig_done);
-        alarm(10);
-#endif
-
-	time_it(CAST_encrypt_normal,	"CAST_encrypt_normal ", 0);
-	time_it(CAST_encrypt_ptr,	"CAST_encrypt_ptr    ", 1);
-	time_it(CAST_encrypt_ptr2,	"CAST_encrypt_ptr2   ", 2);
-	num+=3;
-
-	str[0]="<nothing>";
-	print_it("CAST_encrypt_normal ",0);
-	max=tm[0];
-	max_idx=0;
-	str[1]="ptr      ";
-	print_it("CAST_encrypt_ptr ",1);
-	if (max < tm[1]) { max=tm[1]; max_idx=1; }
-	str[2]="ptr2     ";
-	print_it("CAST_encrypt_ptr2 ",2);
-	if (max < tm[2]) { max=tm[2]; max_idx=2; }
-
-	printf("options    CAST ecb/s\n");
-	printf("%s %12.2f 100.0%%\n",str[max_idx],tm[max_idx]);
-	d=tm[max_idx];
-	tm[max_idx]= -2.0;
-	max= -1.0;
-	for (;;)
-		{
-		for (i=0; i<3; i++)
-			{
-			if (max < tm[i]) { max=tm[i]; j=i; }
-			}
-		if (max < 0.0) break;
-		printf("%s %12.2f  %4.1f%%\n",str[j],tm[j],tm[j]/d*100.0);
-		tm[j]= -2.0;
-		max= -1.0;
-		}
-
-	switch (max_idx)
-		{
-	case 0:
-		printf("-DCAST_DEFAULT_OPTIONS\n");
-		break;
-	case 1:
-		printf("-DCAST_PTR\n");
-		break;
-	case 2:
-		printf("-DCAST_PTR2\n");
-		break;
-		}
-	exit(0);
-#if defined(LINT) || defined(OPENSSL_SYS_MSDOS)
-	return(0);
-#endif
-	}
-
diff --git a/crypto/openssl/crypto/cast/casts.cpp b/crypto/openssl/crypto/cast/casts.cpp
deleted file mode 100644
index 8d7bd468d229..000000000000
--- a/crypto/openssl/crypto/cast/casts.cpp
+++ /dev/null
@@ -1,70 +0,0 @@
-//
-// gettsc.inl
-//
-// gives access to the Pentium's (secret) cycle counter
-//
-// This software was written by Leonard Janke (janke@unixg.ubc.ca)
-// in 1996-7 and is entered, by him, into the public domain.
-
-#if defined(__WATCOMC__)
-void GetTSC(unsigned long&);
-#pragma aux GetTSC = 0x0f 0x31 "mov [edi], eax" parm [edi] modify [edx eax];
-#elif defined(__GNUC__)
-inline
-void GetTSC(unsigned long& tsc)
-{
-  asm volatile(".byte 15, 49\n\t"
-	       : "=eax" (tsc)
-	       :
-	       : "%edx", "%eax");
-}
-#elif defined(_MSC_VER)
-inline
-void GetTSC(unsigned long& tsc)
-{
-  unsigned long a;
-  __asm _emit 0fh
-  __asm _emit 31h
-  __asm mov a, eax;
-  tsc=a;
-}
-#endif      
-
-#include <stdio.h>
-#include <stdlib.h>
-#include <openssl/cast.h>
-
-void main(int argc,char *argv[])
-	{
-	CAST_KEY key;
-	unsigned long s1,s2,e1,e2;
-	unsigned long data[2];
-	int i,j;
-	static unsigned char d[16]={0x01,0x23,0x45,0x67,0x89,0xAB,0xCD,0xEF};
-
-	CAST_set_key(&key, 16,d);
-
-	for (j=0; j<6; j++)
-		{
-		for (i=0; i<1000; i++) /**/
-			{
-			CAST_encrypt(&data[0],&key);
-			GetTSC(s1);
-			CAST_encrypt(&data[0],&key);
-			CAST_encrypt(&data[0],&key);
-			CAST_encrypt(&data[0],&key);
-			GetTSC(e1);
-			GetTSC(s2);
-			CAST_encrypt(&data[0],&key);
-			CAST_encrypt(&data[0],&key);
-			CAST_encrypt(&data[0],&key);
-			CAST_encrypt(&data[0],&key);
-			GetTSC(e2);
-			CAST_encrypt(&data[0],&key);
-			}
-
-		printf("cast %d %d (%d)\n",
-			e1-s1,e2-s2,((e2-s2)-(e1-s1)));
-		}
-	}
-
diff --git a/crypto/openssl/crypto/cast/casttest.c b/crypto/openssl/crypto/cast/casttest.c
deleted file mode 100644
index 0d020d697596..000000000000
--- a/crypto/openssl/crypto/cast/casttest.c
+++ /dev/null
@@ -1,233 +0,0 @@
-/* crypto/cast/casttest.c */
-/* Copyright (C) 1995-1998 Eric Young (eay@cryptsoft.com)
- * All rights reserved.
- *
- * This package is an SSL implementation written
- * by Eric Young (eay@cryptsoft.com).
- * The implementation was written so as to conform with Netscapes SSL.
- * 
- * This library is free for commercial and non-commercial use as long as
- * the following conditions are aheared to.  The following conditions
- * apply to all code found in this distribution, be it the RC4, RSA,
- * lhash, DES, etc., code; not just the SSL code.  The SSL documentation
- * included with this distribution is covered by the same copyright terms
- * except that the holder is Tim Hudson (tjh@cryptsoft.com).
- * 
- * Copyright remains Eric Young's, and as such any Copyright notices in
- * the code are not to be removed.
- * If this package is used in a product, Eric Young should be given attribution
- * as the author of the parts of the library used.
- * This can be in the form of a textual message at program startup or
- * in documentation (online or textual) provided with the package.
- * 
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions
- * are met:
- * 1. Redistributions of source code must retain the copyright
- *    notice, this list of conditions and the following disclaimer.
- * 2. Redistributions in binary form must reproduce the above copyright
- *    notice, this list of conditions and the following disclaimer in the
- *    documentation and/or other materials provided with the distribution.
- * 3. All advertising materials mentioning features or use of this software
- *    must display the following acknowledgement:
- *    "This product includes cryptographic software written by
- *     Eric Young (eay@cryptsoft.com)"
- *    The word 'cryptographic' can be left out if the rouines from the library
- *    being used are not cryptographic related :-).
- * 4. If you include any Windows specific code (or a derivative thereof) from 
- *    the apps directory (application code) you must include an acknowledgement:
- *    "This product includes software written by Tim Hudson (tjh@cryptsoft.com)"
- * 
- * THIS SOFTWARE IS PROVIDED BY ERIC YOUNG ``AS IS'' AND
- * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
- * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
- * ARE DISCLAIMED.  IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE
- * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
- * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
- * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
- * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
- * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
- * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
- * SUCH DAMAGE.
- * 
- * The licence and distribution terms for any publically available version or
- * derivative of this code cannot be changed.  i.e. this code cannot simply be
- * copied and put under another distribution licence
- * [including the GNU Public Licence.]
- */
-
-#include <stdio.h>
-#include <string.h>
-#include <stdlib.h>
-#include <openssl/opensslconf.h> /* To see if OPENSSL_NO_CAST is defined */
-
-#include "../e_os.h"
-
-#ifdef OPENSSL_NO_CAST
-int main(int argc, char *argv[])
-{
-    printf("No CAST support\n");
-    return(0);
-}
-#else
-#include <openssl/cast.h>
-
-#define FULL_TEST
-
-static unsigned char k[16]={
-	0x01,0x23,0x45,0x67,0x12,0x34,0x56,0x78,
-	0x23,0x45,0x67,0x89,0x34,0x56,0x78,0x9A
-	};
-
-static unsigned char in[8]={ 0x01,0x23,0x45,0x67,0x89,0xAB,0xCD,0xEF};
-
-static int k_len[3]={16,10,5};
-static unsigned char c[3][8]={
-	{0x23,0x8B,0x4F,0xE5,0x84,0x7E,0x44,0xB2},
-	{0xEB,0x6A,0x71,0x1A,0x2C,0x02,0x27,0x1B},
-	{0x7A,0xC8,0x16,0xD1,0x6E,0x9B,0x30,0x2E},
-	};
-static unsigned char out[80];
-
-static unsigned char in_a[16]={
-	0x01,0x23,0x45,0x67,0x12,0x34,0x56,0x78,
-	0x23,0x45,0x67,0x89,0x34,0x56,0x78,0x9A};
-static unsigned char in_b[16]={
-	0x01,0x23,0x45,0x67,0x12,0x34,0x56,0x78,
-	0x23,0x45,0x67,0x89,0x34,0x56,0x78,0x9A};
-
-static unsigned char c_a[16]={
-	0xEE,0xA9,0xD0,0xA2,0x49,0xFD,0x3B,0xA6,
-	0xB3,0x43,0x6F,0xB8,0x9D,0x6D,0xCA,0x92};
-static unsigned char c_b[16]={
-	0xB2,0xC9,0x5E,0xB0,0x0C,0x31,0xAD,0x71,
-	0x80,0xAC,0x05,0xB8,0xE8,0x3D,0x69,0x6E};
-
-#if 0
-char *text="Hello to all people out there";
-
-static unsigned char cfb_key[16]={
-	0xe1,0xf0,0xc3,0xd2,0xa5,0xb4,0x87,0x96,
-	0x69,0x78,0x4b,0x5a,0x2d,0x3c,0x0f,0x1e,
-	};
-static unsigned char cfb_iv[80]={0x34,0x12,0x78,0x56,0xab,0x90,0xef,0xcd};
-static unsigned char cfb_buf1[40],cfb_buf2[40],cfb_tmp[8];
-#define CFB_TEST_SIZE 24
-static unsigned char plain[CFB_TEST_SIZE]=
-        {
-        0x4e,0x6f,0x77,0x20,0x69,0x73,
-        0x20,0x74,0x68,0x65,0x20,0x74,
-        0x69,0x6d,0x65,0x20,0x66,0x6f,
-        0x72,0x20,0x61,0x6c,0x6c,0x20
-        };
-static unsigned char cfb_cipher64[CFB_TEST_SIZE]={
-	0x59,0xD8,0xE2,0x65,0x00,0x58,0x6C,0x3F,
-	0x2C,0x17,0x25,0xD0,0x1A,0x38,0xB7,0x2A,
-	0x39,0x61,0x37,0xDC,0x79,0xFB,0x9F,0x45
-
-/*	0xF9,0x78,0x32,0xB5,0x42,0x1A,0x6B,0x38,
-	0x9A,0x44,0xD6,0x04,0x19,0x43,0xC4,0xD9,
-	0x3D,0x1E,0xAE,0x47,0xFC,0xCF,0x29,0x0B,*/
-	}; 
-#endif
-
-int main(int argc, char *argv[])
-    {
-#ifdef FULL_TEST
-    long l;
-    CAST_KEY key_b;
-#endif
-    int i,z,err=0;
-    CAST_KEY key;
-
-    for (z=0; z<3; z++)
-	{
-	CAST_set_key(&key,k_len[z],k);
-
-	CAST_ecb_encrypt(in,out,&key,CAST_ENCRYPT);
-	if (memcmp(out,&(c[z][0]),8) != 0)
-	    {
-	    printf("ecb cast error encrypting for keysize %d\n",k_len[z]*8);
-	    printf("got     :");
-	    for (i=0; i<8; i++)
-		printf("%02X ",out[i]);
-	    printf("\n");
-	    printf("expected:");
-	    for (i=0; i<8; i++)
-		printf("%02X ",c[z][i]);
-	    err=20;
-	    printf("\n");
-	    }
-
-	CAST_ecb_encrypt(out,out,&key,CAST_DECRYPT);
-	if (memcmp(out,in,8) != 0)
-	    {
-	    printf("ecb cast error decrypting for keysize %d\n",k_len[z]*8);
-	    printf("got     :");
-	    for (i=0; i<8; i++)
-		printf("%02X ",out[i]);
-	    printf("\n");
-	    printf("expected:");
-	    for (i=0; i<8; i++)
-		printf("%02X ",in[i]);
-	    printf("\n");
-	    err=3;
-	    }
-	}
-    if (err == 0)
-	printf("ecb cast5 ok\n");
-
-#ifdef FULL_TEST
-      {
-      unsigned char out_a[16],out_b[16];
-      static char *hex="0123456789ABCDEF";
-      
-      printf("This test will take some time....");
-      fflush(stdout);
-      memcpy(out_a,in_a,sizeof(in_a));
-      memcpy(out_b,in_b,sizeof(in_b));
-      i=1;
-
-      for (l=0; l<1000000L; l++)
-	  {
-	  CAST_set_key(&key_b,16,out_b);
-	  CAST_ecb_encrypt(&(out_a[0]),&(out_a[0]),&key_b,CAST_ENCRYPT);
-	  CAST_ecb_encrypt(&(out_a[8]),&(out_a[8]),&key_b,CAST_ENCRYPT);
-	  CAST_set_key(&key,16,out_a);
-	  CAST_ecb_encrypt(&(out_b[0]),&(out_b[0]),&key,CAST_ENCRYPT);
-	  CAST_ecb_encrypt(&(out_b[8]),&(out_b[8]),&key,CAST_ENCRYPT);
-	  if ((l & 0xffff) == 0xffff)
-	      {
-	      printf("%c",hex[i&0x0f]);
-	      fflush(stdout);
-	      i++;
-	      }
-	  }
-
-      if (	(memcmp(out_a,c_a,sizeof(c_a)) != 0) ||
-		(memcmp(out_b,c_b,sizeof(c_b)) != 0))
-	  {
-	  printf("\n");
-	  printf("Error\n");
-
-	  printf("A out =");
-	  for (i=0; i<16; i++) printf("%02X ",out_a[i]);
-	  printf("\nactual=");
-	  for (i=0; i<16; i++) printf("%02X ",c_a[i]);
-	  printf("\n");
-
-	  printf("B out =");
-	  for (i=0; i<16; i++) printf("%02X ",out_b[i]);
-	  printf("\nactual=");
-	  for (i=0; i<16; i++) printf("%02X ",c_b[i]);
-	  printf("\n");
-	  }
-      else
-	  printf(" ok\n");
-      }
-#endif
-
-    EXIT(err);
-    return(err);
-    }
-#endif
diff --git a/crypto/openssl/crypto/comp/Makefile b/crypto/openssl/crypto/comp/Makefile
deleted file mode 100644
index efda832dce47..000000000000
--- a/crypto/openssl/crypto/comp/Makefile
+++ /dev/null
@@ -1,108 +0,0 @@
-#
-# OpenSSL/crypto/comp/Makefile
-#
-
-DIR=	comp
-TOP=	../..
-CC=	cc
-INCLUDES= -I.. -I$(TOP) -I../../include
-CFLAG=-g
-MAKEFILE=	Makefile
-AR=		ar r
-
-CFLAGS= $(INCLUDES) $(CFLAG)
-
-GENERAL=Makefile
-TEST=
-APPS=
-
-LIB=$(TOP)/libcrypto.a
-LIBSRC= comp_lib.c comp_err.c \
-	c_rle.c c_zlib.c
-
-LIBOBJ=	comp_lib.o comp_err.o \
-	c_rle.o c_zlib.o
-
-SRC= $(LIBSRC)
-
-EXHEADER= comp.h
-HEADER=	$(EXHEADER)
-
-ALL=    $(GENERAL) $(SRC) $(HEADER)
-
-top:
-	(cd ../..; $(MAKE) DIRS=crypto SDIRS=$(DIR) sub_all)
-
-all:	lib
-
-lib:	$(LIBOBJ)
-	$(AR) $(LIB) $(LIBOBJ)
-	$(RANLIB) $(LIB) || echo Never mind.
-	@touch lib
-
-files:
-	$(PERL) $(TOP)/util/files.pl Makefile >> $(TOP)/MINFO
-
-links:
-	@$(PERL) $(TOP)/util/mklink.pl ../../include/openssl $(EXHEADER)
-	@$(PERL) $(TOP)/util/mklink.pl ../../test $(TEST)
-	@$(PERL) $(TOP)/util/mklink.pl ../../apps $(APPS)
-
-install:
-	@[ -n "$(INSTALLTOP)" ] # should be set by top Makefile...
-	@headerlist="$(EXHEADER)"; for i in $$headerlist ; \
-	do  \
-	(cp $$i $(INSTALL_PREFIX)$(INSTALLTOP)/include/openssl/$$i; \
-	chmod 644 $(INSTALL_PREFIX)$(INSTALLTOP)/include/openssl/$$i ); \
-	done;
-
-tags:
-	ctags $(SRC)
-
-tests:
-
-lint:
-	lint -DLINT $(INCLUDES) $(SRC)>fluff
-
-depend:
-	@[ -n "$(MAKEDEPEND)" ] # should be set by upper Makefile...
-	$(MAKEDEPEND) -- $(CFLAG) $(INCLUDES) $(DEPFLAG) -- $(LIBSRC)
-
-dclean:
-	$(PERL) -pe 'if (/^# DO NOT DELETE THIS LINE/) {print; exit(0);}' $(MAKEFILE) >Makefile.new
-	mv -f Makefile.new $(MAKEFILE)
-
-clean:
-	rm -f *.o *.obj lib tags core .pure .nfs* *.old *.bak fluff
-
-# DO NOT DELETE THIS LINE -- make depend depends on it.
-
-c_rle.o: ../../include/openssl/asn1.h ../../include/openssl/bio.h
-c_rle.o: ../../include/openssl/comp.h ../../include/openssl/crypto.h
-c_rle.o: ../../include/openssl/e_os2.h ../../include/openssl/obj_mac.h
-c_rle.o: ../../include/openssl/objects.h ../../include/openssl/opensslconf.h
-c_rle.o: ../../include/openssl/opensslv.h ../../include/openssl/ossl_typ.h
-c_rle.o: ../../include/openssl/safestack.h ../../include/openssl/stack.h
-c_rle.o: ../../include/openssl/symhacks.h c_rle.c
-c_zlib.o: ../../include/openssl/asn1.h ../../include/openssl/bio.h
-c_zlib.o: ../../include/openssl/comp.h ../../include/openssl/crypto.h
-c_zlib.o: ../../include/openssl/e_os2.h ../../include/openssl/err.h
-c_zlib.o: ../../include/openssl/lhash.h ../../include/openssl/obj_mac.h
-c_zlib.o: ../../include/openssl/objects.h ../../include/openssl/opensslconf.h
-c_zlib.o: ../../include/openssl/opensslv.h ../../include/openssl/ossl_typ.h
-c_zlib.o: ../../include/openssl/safestack.h ../../include/openssl/stack.h
-c_zlib.o: ../../include/openssl/symhacks.h c_zlib.c
-comp_err.o: ../../include/openssl/bio.h ../../include/openssl/comp.h
-comp_err.o: ../../include/openssl/crypto.h ../../include/openssl/e_os2.h
-comp_err.o: ../../include/openssl/err.h ../../include/openssl/lhash.h
-comp_err.o: ../../include/openssl/opensslconf.h
-comp_err.o: ../../include/openssl/opensslv.h ../../include/openssl/ossl_typ.h
-comp_err.o: ../../include/openssl/safestack.h ../../include/openssl/stack.h
-comp_err.o: ../../include/openssl/symhacks.h comp_err.c
-comp_lib.o: ../../include/openssl/asn1.h ../../include/openssl/bio.h
-comp_lib.o: ../../include/openssl/comp.h ../../include/openssl/crypto.h
-comp_lib.o: ../../include/openssl/e_os2.h ../../include/openssl/obj_mac.h
-comp_lib.o: ../../include/openssl/objects.h ../../include/openssl/opensslconf.h
-comp_lib.o: ../../include/openssl/opensslv.h ../../include/openssl/ossl_typ.h
-comp_lib.o: ../../include/openssl/safestack.h ../../include/openssl/stack.h
-comp_lib.o: ../../include/openssl/symhacks.h comp_lib.c
diff --git a/crypto/openssl/crypto/comp/c_rle.c b/crypto/openssl/crypto/comp/c_rle.c
deleted file mode 100644
index efd366fa2239..000000000000
--- a/crypto/openssl/crypto/comp/c_rle.c
+++ /dev/null
@@ -1,62 +0,0 @@
-#include <stdio.h>
-#include <stdlib.h>
-#include <string.h>
-#include <openssl/objects.h>
-#include <openssl/comp.h>
-
-static int rle_compress_block(COMP_CTX *ctx, unsigned char *out,
-	unsigned int olen, unsigned char *in, unsigned int ilen);
-static int rle_expand_block(COMP_CTX *ctx, unsigned char *out,
-	unsigned int olen, unsigned char *in, unsigned int ilen);
-
-static COMP_METHOD rle_method={
-	NID_rle_compression,
-	LN_rle_compression,
-	NULL,
-	NULL,
-	rle_compress_block,
-	rle_expand_block,
-	NULL,
-	NULL,
-	};
-
-COMP_METHOD *COMP_rle(void)
-	{
-	return(&rle_method);
-	}
-
-static int rle_compress_block(COMP_CTX *ctx, unsigned char *out,
-	     unsigned int olen, unsigned char *in, unsigned int ilen)
-	{
-	/* int i; */
-
-	if (olen < (ilen+1))
-		{
-		/* ZZZZZZZZZZZZZZZZZZZZZZ */
-		return(-1);
-		}
-
-	*(out++)=0;
-	memcpy(out,in,ilen);
-	return(ilen+1);
-	}
-
-static int rle_expand_block(COMP_CTX *ctx, unsigned char *out,
-	     unsigned int olen, unsigned char *in, unsigned int ilen)
-	{
-	int i;
-
-	if (olen < (ilen-1))
-		{
-		/* ZZZZZZZZZZZZZZZZZZZZZZ */
-		return(-1);
-		}
-
-	i= *(in++);
-	if (i == 0)
-		{
-		memcpy(out,in,ilen-1);
-		}
-	return(ilen-1);
-	}
-
diff --git a/crypto/openssl/crypto/comp/c_zlib.c b/crypto/openssl/crypto/comp/c_zlib.c
deleted file mode 100644
index 43402e75dbf5..000000000000
--- a/crypto/openssl/crypto/comp/c_zlib.c
+++ /dev/null
@@ -1,412 +0,0 @@
-#include <stdio.h>
-#include <stdlib.h>
-#include <string.h>
-#include <openssl/objects.h>
-#include <openssl/comp.h>
-#include <openssl/err.h>
-
-COMP_METHOD *COMP_zlib(void );
-
-static COMP_METHOD zlib_method_nozlib={
-	NID_undef,
-	"(undef)",
-	NULL,
-	NULL,
-	NULL,
-	NULL,
-	NULL,
-	NULL,
-	};
-
-#ifndef ZLIB
-#undef ZLIB_SHARED
-#else
-
-#include <zlib.h>
-
-static int zlib_stateful_init(COMP_CTX *ctx);
-static void zlib_stateful_finish(COMP_CTX *ctx);
-static int zlib_stateful_compress_block(COMP_CTX *ctx, unsigned char *out,
-	unsigned int olen, unsigned char *in, unsigned int ilen);
-static int zlib_stateful_expand_block(COMP_CTX *ctx, unsigned char *out,
-	unsigned int olen, unsigned char *in, unsigned int ilen);
-
-
-/* memory allocations functions for zlib intialization */
-static void* zlib_zalloc(void* opaque, unsigned int no, unsigned int size)
-{
-	void *p;
-	
-	p=OPENSSL_malloc(no*size);
-	if (p)
-		memset(p, 0, no*size);
-	return p;
-}
-
-
-static void zlib_zfree(void* opaque, void* address)
-{
-	OPENSSL_free(address);
-}
-
-#if 0
-static int zlib_compress_block(COMP_CTX *ctx, unsigned char *out,
-	unsigned int olen, unsigned char *in, unsigned int ilen);
-static int zlib_expand_block(COMP_CTX *ctx, unsigned char *out,
-	unsigned int olen, unsigned char *in, unsigned int ilen);
-
-static int zz_uncompress(Bytef *dest, uLongf *destLen, const Bytef *source,
-	uLong sourceLen);
-
-static COMP_METHOD zlib_stateless_method={
-	NID_zlib_compression,
-	LN_zlib_compression,
-	NULL,
-	NULL,
-	zlib_compress_block,
-	zlib_expand_block,
-	NULL,
-	NULL,
-	};
-#endif
-
-static COMP_METHOD zlib_stateful_method={
-	NID_zlib_compression,
-	LN_zlib_compression,
-	zlib_stateful_init,
-	zlib_stateful_finish,
-	zlib_stateful_compress_block,
-	zlib_stateful_expand_block,
-	NULL,
-	NULL,
-	};
-
-/* 
- * When OpenSSL is built on Windows, we do not want to require that
- * the ZLIB.DLL be available in order for the OpenSSL DLLs to
- * work.  Therefore, all ZLIB routines are loaded at run time
- * and we do not link to a .LIB file when ZLIB_SHARED is set.
- */
-#if defined(OPENSSL_SYS_WINDOWS) || defined(OPENSSL_SYS_WIN32)
-# include <windows.h>
-#endif /* !(OPENSSL_SYS_WINDOWS || OPENSSL_SYS_WIN32) */
-
-#ifdef ZLIB_SHARED
-#include <openssl/dso.h>
-
-/* Function pointers */
-typedef int (*compress_ft)(Bytef *dest,uLongf *destLen,
-	const Bytef *source, uLong sourceLen);
-typedef int (*inflateEnd_ft)(z_streamp strm);
-typedef int (*inflate_ft)(z_streamp strm, int flush);
-typedef int (*inflateInit__ft)(z_streamp strm,
-	const char * version, int stream_size);
-typedef int (*deflateEnd_ft)(z_streamp strm);
-typedef int (*deflate_ft)(z_streamp strm, int flush);
-typedef int (*deflateInit__ft)(z_streamp strm, int level,
-	const char * version, int stream_size);
-static compress_ft	p_compress=NULL;
-static inflateEnd_ft	p_inflateEnd=NULL;
-static inflate_ft	p_inflate=NULL;
-static inflateInit__ft	p_inflateInit_=NULL;
-static deflateEnd_ft	p_deflateEnd=NULL;
-static deflate_ft	p_deflate=NULL;
-static deflateInit__ft	p_deflateInit_=NULL;
-
-static int zlib_loaded = 0;     /* only attempt to init func pts once */
-static DSO *zlib_dso = NULL;
-
-#define compress                p_compress
-#define inflateEnd              p_inflateEnd
-#define inflate                 p_inflate
-#define inflateInit_            p_inflateInit_
-#define deflateEnd              p_deflateEnd
-#define deflate                 p_deflate
-#define deflateInit_            p_deflateInit_
-#endif /* ZLIB_SHARED */
-
-struct zlib_state
-	{
-	z_stream istream;
-	z_stream ostream;
-	};
-
-static int zlib_stateful_ex_idx = -1;
-
-static void zlib_stateful_free_ex_data(void *obj, void *item,
-	CRYPTO_EX_DATA *ad, int ind,long argl, void *argp)
-	{
-	struct zlib_state *state = (struct zlib_state *)item;
-	inflateEnd(&state->istream);
-	deflateEnd(&state->ostream);
-	OPENSSL_free(state);
-	}
-
-static int zlib_stateful_init(COMP_CTX *ctx)
-	{
-	int err;
-	struct zlib_state *state =
-		(struct zlib_state *)OPENSSL_malloc(sizeof(struct zlib_state));
-
-	if (state == NULL)
-		goto err;
-
-	state->istream.zalloc = zlib_zalloc;
-	state->istream.zfree = zlib_zfree;
-	state->istream.opaque = Z_NULL;
-	state->istream.next_in = Z_NULL;
-	state->istream.next_out = Z_NULL;
-	state->istream.avail_in = 0;
-	state->istream.avail_out = 0;
-	err = inflateInit_(&state->istream,
-		ZLIB_VERSION, sizeof(z_stream));
-	if (err != Z_OK)
-		goto err;
-
-	state->ostream.zalloc = zlib_zalloc;
-	state->ostream.zfree = zlib_zfree;
-	state->ostream.opaque = Z_NULL;
-	state->ostream.next_in = Z_NULL;
-	state->ostream.next_out = Z_NULL;
-	state->ostream.avail_in = 0;
-	state->ostream.avail_out = 0;
-	err = deflateInit_(&state->ostream,Z_DEFAULT_COMPRESSION,
-		ZLIB_VERSION, sizeof(z_stream));
-	if (err != Z_OK)
-		goto err;
-
-	CRYPTO_new_ex_data(CRYPTO_EX_INDEX_COMP,ctx,&ctx->ex_data);
-	CRYPTO_set_ex_data(&ctx->ex_data,zlib_stateful_ex_idx,state);
-	return 1;
- err:
-	if (state) OPENSSL_free(state);
-	return 0;
-	}
-
-static void zlib_stateful_finish(COMP_CTX *ctx)
-	{
-	CRYPTO_free_ex_data(CRYPTO_EX_INDEX_COMP,ctx,&ctx->ex_data);
-	}
-
-static int zlib_stateful_compress_block(COMP_CTX *ctx, unsigned char *out,
-	unsigned int olen, unsigned char *in, unsigned int ilen)
-	{
-	int err = Z_OK;
-	struct zlib_state *state =
-		(struct zlib_state *)CRYPTO_get_ex_data(&ctx->ex_data,
-			zlib_stateful_ex_idx);
-
-	if (state == NULL)
-		return -1;
-
-	state->ostream.next_in = in;
-	state->ostream.avail_in = ilen;
-	state->ostream.next_out = out;
-	state->ostream.avail_out = olen;
-	if (ilen > 0)
-		err = deflate(&state->ostream, Z_SYNC_FLUSH);
-	if (err != Z_OK)
-		return -1;
-#ifdef DEBUG_ZLIB
-	fprintf(stderr,"compress(%4d)->%4d %s\n",
-		ilen,olen - state->ostream.avail_out,
-		(ilen != olen - state->ostream.avail_out)?"zlib":"clear");
-#endif
-	return olen - state->ostream.avail_out;
-	}
-
-static int zlib_stateful_expand_block(COMP_CTX *ctx, unsigned char *out,
-	unsigned int olen, unsigned char *in, unsigned int ilen)
-	{
-	int err = Z_OK;
-
-	struct zlib_state *state =
-		(struct zlib_state *)CRYPTO_get_ex_data(&ctx->ex_data,
-			zlib_stateful_ex_idx);
-
-	if (state == NULL)
-		return 0;
-
-	state->istream.next_in = in;
-	state->istream.avail_in = ilen;
-	state->istream.next_out = out;
-	state->istream.avail_out = olen;
-	if (ilen > 0)
-		err = inflate(&state->istream, Z_SYNC_FLUSH);
-	if (err != Z_OK)
-		return -1;
-#ifdef DEBUG_ZLIB
-	fprintf(stderr,"expand(%4d)->%4d %s\n",
-		ilen,olen - state->istream.avail_out,
-		(ilen != olen - state->istream.avail_out)?"zlib":"clear");
-#endif
-	return olen - state->istream.avail_out;
-	}
-
-#if 0
-static int zlib_compress_block(COMP_CTX *ctx, unsigned char *out,
-	unsigned int olen, unsigned char *in, unsigned int ilen)
-	{
-	unsigned long l;
-	int i;
-	int clear=1;
-
-	if (ilen > 128)
-		{
-		out[0]=1;
-		l=olen-1;
-		i=compress(&(out[1]),&l,in,(unsigned long)ilen);
-		if (i != Z_OK)
-			return(-1);
-		if (ilen > l)
-			{
-			clear=0;
-			l++;
-			}
-		}
-	if (clear)
-		{
-		out[0]=0;
-		memcpy(&(out[1]),in,ilen);
-		l=ilen+1;
-		}
-#ifdef DEBUG_ZLIB
-	fprintf(stderr,"compress(%4d)->%4d %s\n",
-		ilen,(int)l,(clear)?"clear":"zlib");
-#endif
-	return((int)l);
-	}
-
-static int zlib_expand_block(COMP_CTX *ctx, unsigned char *out,
-	unsigned int olen, unsigned char *in, unsigned int ilen)
-	{
-	unsigned long l;
-	int i;
-
-	if (in[0])
-		{
-		l=olen;
-		i=zz_uncompress(out,&l,&(in[1]),(unsigned long)ilen-1);
-		if (i != Z_OK)
-			return(-1);
-		}
-	else
-		{
-		memcpy(out,&(in[1]),ilen-1);
-		l=ilen-1;
-		}
-#ifdef DEBUG_ZLIB
-        fprintf(stderr,"expand  (%4d)->%4d %s\n",
-		ilen,(int)l,in[0]?"zlib":"clear");
-#endif
-	return((int)l);
-	}
-
-static int zz_uncompress (Bytef *dest, uLongf *destLen, const Bytef *source,
-	     uLong sourceLen)
-{
-    z_stream stream;
-    int err;
-
-    stream.next_in = (Bytef*)source;
-    stream.avail_in = (uInt)sourceLen;
-    /* Check for source > 64K on 16-bit machine: */
-    if ((uLong)stream.avail_in != sourceLen) return Z_BUF_ERROR;
-
-    stream.next_out = dest;
-    stream.avail_out = (uInt)*destLen;
-    if ((uLong)stream.avail_out != *destLen) return Z_BUF_ERROR;
-
-    stream.zalloc = (alloc_func)0;
-    stream.zfree = (free_func)0;
-
-    err = inflateInit_(&stream,
-	    ZLIB_VERSION, sizeof(z_stream));
-    if (err != Z_OK) return err;
-
-    err = inflate(&stream, Z_FINISH);
-    if (err != Z_STREAM_END) {
-        inflateEnd(&stream);
-        return err;
-    }
-    *destLen = stream.total_out;
-
-    err = inflateEnd(&stream);
-    return err;
-}
-#endif
-
-#endif
-
-COMP_METHOD *COMP_zlib(void)
-	{
-	COMP_METHOD *meth = &zlib_method_nozlib;
-
-#ifdef ZLIB_SHARED
-	if (!zlib_loaded)
-		{
-#if defined(OPENSSL_SYS_WINDOWS) || defined(OPENSSL_SYS_WIN32)
-		zlib_dso = DSO_load(NULL, "ZLIB1", NULL, 0);
-#else
-		zlib_dso = DSO_load(NULL, "z", NULL, 0);
-#endif
-		if (zlib_dso != NULL)
-			{
-			p_compress
-				= (compress_ft) DSO_bind_func(zlib_dso,
-					"compress");
-			p_inflateEnd
-				= (inflateEnd_ft) DSO_bind_func(zlib_dso,
-					"inflateEnd");
-			p_inflate
-				= (inflate_ft) DSO_bind_func(zlib_dso,
-					"inflate");
-			p_inflateInit_
-				= (inflateInit__ft) DSO_bind_func(zlib_dso,
-					"inflateInit_");
-			p_deflateEnd
-				= (deflateEnd_ft) DSO_bind_func(zlib_dso,
-					"deflateEnd");
-			p_deflate
-				= (deflate_ft) DSO_bind_func(zlib_dso,
-					"deflate");
-			p_deflateInit_
-				= (deflateInit__ft) DSO_bind_func(zlib_dso,
-					"deflateInit_");
-
-			if (p_compress && p_inflateEnd && p_inflate
-				&& p_inflateInit_ && p_deflateEnd
-				&& p_deflate && p_deflateInit_)
-				zlib_loaded++;
-			}
-		}
-
-#endif
-#ifdef ZLIB_SHARED
-	if (zlib_loaded)
-#endif
-#if defined(ZLIB) || defined(ZLIB_SHARED)
-		{
-		/* init zlib_stateful_ex_idx here so that in a multi-process
-		 * application it's enough to intialize openssl before forking
-		 * (idx will be inherited in all the children) */
-		if (zlib_stateful_ex_idx == -1)
-			{
-			CRYPTO_w_lock(CRYPTO_LOCK_COMP);
-			if (zlib_stateful_ex_idx == -1)
-				zlib_stateful_ex_idx =
-					CRYPTO_get_ex_new_index(CRYPTO_EX_INDEX_COMP,
-						0,NULL,NULL,NULL,zlib_stateful_free_ex_data);
-			CRYPTO_w_unlock(CRYPTO_LOCK_COMP);
-			if (zlib_stateful_ex_idx == -1)
-				goto err;
-			}
-		
-		meth = &zlib_stateful_method;
-		}
-err:	
-#endif
-
-	return(meth);
-	}
-
diff --git a/crypto/openssl/crypto/comp/comp.h b/crypto/openssl/crypto/comp/comp.h
deleted file mode 100644
index 5d59354a5715..000000000000
--- a/crypto/openssl/crypto/comp/comp.h
+++ /dev/null
@@ -1,66 +0,0 @@
-
-#ifndef HEADER_COMP_H
-#define HEADER_COMP_H
-
-#include <openssl/crypto.h>
-
-#ifdef  __cplusplus
-extern "C" {
-#endif
-
-typedef struct comp_ctx_st COMP_CTX;
-
-typedef struct comp_method_st
-	{
-	int type;		/* NID for compression library */
-	const char *name;	/* A text string to identify the library */
-	int (*init)(COMP_CTX *ctx);
-	void (*finish)(COMP_CTX *ctx);
-	int (*compress)(COMP_CTX *ctx,
-			unsigned char *out, unsigned int olen,
-			unsigned char *in, unsigned int ilen);
-	int (*expand)(COMP_CTX *ctx,
-		      unsigned char *out, unsigned int olen,
-		      unsigned char *in, unsigned int ilen);
-	/* The following two do NOTHING, but are kept for backward compatibility */
-	long (*ctrl)(void);
-	long (*callback_ctrl)(void);
-	} COMP_METHOD;
-
-struct comp_ctx_st
-	{
-	COMP_METHOD *meth;
-	unsigned long compress_in;
-	unsigned long compress_out;
-	unsigned long expand_in;
-	unsigned long expand_out;
-
-	CRYPTO_EX_DATA	ex_data;
-	};
-
-
-COMP_CTX *COMP_CTX_new(COMP_METHOD *meth);
-void COMP_CTX_free(COMP_CTX *ctx);
-int COMP_compress_block(COMP_CTX *ctx, unsigned char *out, int olen,
-	unsigned char *in, int ilen);
-int COMP_expand_block(COMP_CTX *ctx, unsigned char *out, int olen,
-	unsigned char *in, int ilen);
-COMP_METHOD *COMP_rle(void );
-COMP_METHOD *COMP_zlib(void );
-
-/* BEGIN ERROR CODES */
-/* The following lines are auto generated by the script mkerr.pl. Any changes
- * made after this point may be overwritten when the script is next run.
- */
-void ERR_load_COMP_strings(void);
-
-/* Error codes for the COMP functions. */
-
-/* Function codes. */
-
-/* Reason codes. */
-
-#ifdef  __cplusplus
-}
-#endif
-#endif
diff --git a/crypto/openssl/crypto/comp/comp_err.c b/crypto/openssl/crypto/comp/comp_err.c
deleted file mode 100644
index 07372226c9d0..000000000000
--- a/crypto/openssl/crypto/comp/comp_err.c
+++ /dev/null
@@ -1,93 +0,0 @@
-/* crypto/comp/comp_err.c */
-/* ====================================================================
- * Copyright (c) 1999-2005 The OpenSSL Project.  All rights reserved.
- *
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions
- * are met:
- *
- * 1. Redistributions of source code must retain the above copyright
- *    notice, this list of conditions and the following disclaimer. 
- *
- * 2. Redistributions in binary form must reproduce the above copyright
- *    notice, this list of conditions and the following disclaimer in
- *    the documentation and/or other materials provided with the
- *    distribution.
- *
- * 3. All advertising materials mentioning features or use of this
- *    software must display the following acknowledgment:
- *    "This product includes software developed by the OpenSSL Project
- *    for use in the OpenSSL Toolkit. (http://www.OpenSSL.org/)"
- *
- * 4. The names "OpenSSL Toolkit" and "OpenSSL Project" must not be used to
- *    endorse or promote products derived from this software without
- *    prior written permission. For written permission, please contact
- *    openssl-core@OpenSSL.org.
- *
- * 5. Products derived from this software may not be called "OpenSSL"
- *    nor may "OpenSSL" appear in their names without prior written
- *    permission of the OpenSSL Project.
- *
- * 6. Redistributions of any form whatsoever must retain the following
- *    acknowledgment:
- *    "This product includes software developed by the OpenSSL Project
- *    for use in the OpenSSL Toolkit (http://www.OpenSSL.org/)"
- *
- * THIS SOFTWARE IS PROVIDED BY THE OpenSSL PROJECT ``AS IS'' AND ANY
- * EXPRESSED OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
- * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR
- * PURPOSE ARE DISCLAIMED.  IN NO EVENT SHALL THE OpenSSL PROJECT OR
- * ITS CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
- * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
- * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
- * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
- * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
- * STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
- * ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED
- * OF THE POSSIBILITY OF SUCH DAMAGE.
- * ====================================================================
- *
- * This product includes cryptographic software written by Eric Young
- * (eay@cryptsoft.com).  This product includes software written by Tim
- * Hudson (tjh@cryptsoft.com).
- *
- */
-
-/* NOTE: this file was auto generated by the mkerr.pl script: any changes
- * made to it will be overwritten when the script next updates this file,
- * only reason strings will be preserved.
- */
-
-#include <stdio.h>
-#include <openssl/err.h>
-#include <openssl/comp.h>
-
-/* BEGIN ERROR CODES */
-#ifndef OPENSSL_NO_ERR
-
-#define ERR_FUNC(func) ERR_PACK(ERR_LIB_COMP,func,0)
-#define ERR_REASON(reason) ERR_PACK(ERR_LIB_COMP,0,reason)
-
-static ERR_STRING_DATA COMP_str_functs[]=
-	{
-{0,NULL}
-	};
-
-static ERR_STRING_DATA COMP_str_reasons[]=
-	{
-{0,NULL}
-	};
-
-#endif
-
-void ERR_load_COMP_strings(void)
-	{
-#ifndef OPENSSL_NO_ERR
-
-	if (ERR_func_error_string(COMP_str_functs[0].error) == NULL)
-		{
-		ERR_load_strings(0,COMP_str_functs);
-		ERR_load_strings(0,COMP_str_reasons);
-		}
-#endif
-	}
diff --git a/crypto/openssl/crypto/comp/comp_lib.c b/crypto/openssl/crypto/comp/comp_lib.c
deleted file mode 100644
index b60ae371e8d1..000000000000
--- a/crypto/openssl/crypto/comp/comp_lib.c
+++ /dev/null
@@ -1,72 +0,0 @@
-#include <stdio.h>
-#include <stdlib.h>
-#include <string.h>
-#include <openssl/objects.h>
-#include <openssl/comp.h>
-
-COMP_CTX *COMP_CTX_new(COMP_METHOD *meth)
-	{
-	COMP_CTX *ret;
-
-	if ((ret=(COMP_CTX *)OPENSSL_malloc(sizeof(COMP_CTX))) == NULL)
-		{
-		/* ZZZZZZZZZZZZZZZZ */
-		return(NULL);
-		}
-	memset(ret,0,sizeof(COMP_CTX));
-	ret->meth=meth;
-	if ((ret->meth->init != NULL) && !ret->meth->init(ret))
-		{
-		OPENSSL_free(ret);
-		ret=NULL;
-		}
-	return(ret);
-	}
-
-void COMP_CTX_free(COMP_CTX *ctx)
-	{
-	if(ctx == NULL)
-	    return;
-
-	if (ctx->meth->finish != NULL)
-		ctx->meth->finish(ctx);
-
-	OPENSSL_free(ctx);
-	}
-
-int COMP_compress_block(COMP_CTX *ctx, unsigned char *out, int olen,
-	     unsigned char *in, int ilen)
-	{
-	int ret;
-	if (ctx->meth->compress == NULL)
-		{
-		/* ZZZZZZZZZZZZZZZZZ */
-		return(-1);
-		}
-	ret=ctx->meth->compress(ctx,out,olen,in,ilen);
-	if (ret > 0)
-		{
-		ctx->compress_in+=ilen;
-		ctx->compress_out+=ret;
-		}
-	return(ret);
-	}
-
-int COMP_expand_block(COMP_CTX *ctx, unsigned char *out, int olen,
-	     unsigned char *in, int ilen)
-	{
-	int ret;
-
-	if (ctx->meth->expand == NULL)
-		{
-		/* ZZZZZZZZZZZZZZZZZ */
-		return(-1);
-		}
-	ret=ctx->meth->expand(ctx,out,olen,in,ilen);
-	if (ret > 0)
-		{
-		ctx->expand_in+=ilen;
-		ctx->expand_out+=ret;
-		}
-	return(ret);
-	}
diff --git a/crypto/openssl/crypto/conf/Makefile b/crypto/openssl/crypto/conf/Makefile
deleted file mode 100644
index 78bb3241065d..000000000000
--- a/crypto/openssl/crypto/conf/Makefile
+++ /dev/null
@@ -1,152 +0,0 @@
-#
-# OpenSSL/crypto/conf/Makefile
-#
-
-DIR=	conf
-TOP=	../..
-CC=	cc
-INCLUDES= -I.. -I$(TOP) -I../../include
-CFLAG=-g
-MAKEFILE=	Makefile
-AR=		ar r
-
-CFLAGS= $(INCLUDES) $(CFLAG)
-
-GENERAL=Makefile
-TEST=
-APPS=
-
-LIB=$(TOP)/libcrypto.a
-LIBSRC= conf_err.c conf_lib.c conf_api.c conf_def.c conf_mod.c \
-	 conf_mall.c conf_sap.c
-
-LIBOBJ=	conf_err.o conf_lib.o conf_api.o conf_def.o conf_mod.o \
-	conf_mall.o conf_sap.o
-
-SRC= $(LIBSRC)
-
-EXHEADER= conf.h conf_api.h
-HEADER=	conf_def.h $(EXHEADER)
-
-ALL=    $(GENERAL) $(SRC) $(HEADER)
-
-top:
-	(cd ../..; $(MAKE) DIRS=crypto SDIRS=$(DIR) sub_all)
-
-all:	lib
-
-lib:	$(LIBOBJ)
-	$(AR) $(LIB) $(LIBOBJ)
-	$(RANLIB) $(LIB) || echo Never mind.
-	@touch lib
-
-files:
-	$(PERL) $(TOP)/util/files.pl Makefile >> $(TOP)/MINFO
-
-links:
-	@$(PERL) $(TOP)/util/mklink.pl ../../include/openssl $(EXHEADER)
-	@$(PERL) $(TOP)/util/mklink.pl ../../test $(TEST)
-	@$(PERL) $(TOP)/util/mklink.pl ../../apps $(APPS)
-
-install:
-	@[ -n "$(INSTALLTOP)" ] # should be set by top Makefile...
-	@headerlist="$(EXHEADER)"; for i in $$headerlist ; \
-	do  \
-	(cp $$i $(INSTALL_PREFIX)$(INSTALLTOP)/include/openssl/$$i; \
-	chmod 644 $(INSTALL_PREFIX)$(INSTALLTOP)/include/openssl/$$i ); \
-	done;
-
-tags:
-	ctags $(SRC)
-
-tests:
-
-lint:
-	lint -DLINT $(INCLUDES) $(SRC)>fluff
-
-depend:
-	@[ -n "$(MAKEDEPEND)" ] # should be set by upper Makefile...
-	$(MAKEDEPEND) -- $(CFLAG) $(INCLUDES) $(DEPFLAG) -- $(LIBSRC)
-
-dclean:
-	$(PERL) -pe 'if (/^# DO NOT DELETE THIS LINE/) {print; exit(0);}' $(MAKEFILE) >Makefile.new
-	mv -f Makefile.new $(MAKEFILE)
-
-clean:
-	rm -f *.o *.obj lib tags core .pure .nfs* *.old *.bak fluff
-
-# DO NOT DELETE THIS LINE -- make depend depends on it.
-
-conf_api.o: ../../e_os.h ../../include/openssl/bio.h
-conf_api.o: ../../include/openssl/conf.h ../../include/openssl/conf_api.h
-conf_api.o: ../../include/openssl/crypto.h ../../include/openssl/e_os2.h
-conf_api.o: ../../include/openssl/lhash.h ../../include/openssl/opensslconf.h
-conf_api.o: ../../include/openssl/opensslv.h ../../include/openssl/ossl_typ.h
-conf_api.o: ../../include/openssl/safestack.h ../../include/openssl/stack.h
-conf_api.o: ../../include/openssl/symhacks.h conf_api.c
-conf_def.o: ../../e_os.h ../../include/openssl/bio.h
-conf_def.o: ../../include/openssl/buffer.h ../../include/openssl/conf.h
-conf_def.o: ../../include/openssl/conf_api.h ../../include/openssl/crypto.h
-conf_def.o: ../../include/openssl/e_os2.h ../../include/openssl/err.h
-conf_def.o: ../../include/openssl/lhash.h ../../include/openssl/opensslconf.h
-conf_def.o: ../../include/openssl/opensslv.h ../../include/openssl/ossl_typ.h
-conf_def.o: ../../include/openssl/safestack.h ../../include/openssl/stack.h
-conf_def.o: ../../include/openssl/symhacks.h ../cryptlib.h conf_def.c
-conf_def.o: conf_def.h
-conf_err.o: ../../include/openssl/bio.h ../../include/openssl/conf.h
-conf_err.o: ../../include/openssl/crypto.h ../../include/openssl/e_os2.h
-conf_err.o: ../../include/openssl/err.h ../../include/openssl/lhash.h
-conf_err.o: ../../include/openssl/opensslconf.h
-conf_err.o: ../../include/openssl/opensslv.h ../../include/openssl/ossl_typ.h
-conf_err.o: ../../include/openssl/safestack.h ../../include/openssl/stack.h
-conf_err.o: ../../include/openssl/symhacks.h conf_err.c
-conf_lib.o: ../../include/openssl/bio.h ../../include/openssl/conf.h
-conf_lib.o: ../../include/openssl/conf_api.h ../../include/openssl/crypto.h
-conf_lib.o: ../../include/openssl/e_os2.h ../../include/openssl/err.h
-conf_lib.o: ../../include/openssl/lhash.h ../../include/openssl/opensslconf.h
-conf_lib.o: ../../include/openssl/opensslv.h ../../include/openssl/ossl_typ.h
-conf_lib.o: ../../include/openssl/safestack.h ../../include/openssl/stack.h
-conf_lib.o: ../../include/openssl/symhacks.h conf_lib.c
-conf_mall.o: ../../e_os.h ../../include/openssl/asn1.h
-conf_mall.o: ../../include/openssl/bio.h ../../include/openssl/buffer.h
-conf_mall.o: ../../include/openssl/conf.h ../../include/openssl/crypto.h
-conf_mall.o: ../../include/openssl/dso.h ../../include/openssl/e_os2.h
-conf_mall.o: ../../include/openssl/ec.h ../../include/openssl/ecdh.h
-conf_mall.o: ../../include/openssl/ecdsa.h ../../include/openssl/engine.h
-conf_mall.o: ../../include/openssl/err.h ../../include/openssl/evp.h
-conf_mall.o: ../../include/openssl/lhash.h ../../include/openssl/obj_mac.h
-conf_mall.o: ../../include/openssl/objects.h
-conf_mall.o: ../../include/openssl/opensslconf.h
-conf_mall.o: ../../include/openssl/opensslv.h ../../include/openssl/ossl_typ.h
-conf_mall.o: ../../include/openssl/pkcs7.h ../../include/openssl/safestack.h
-conf_mall.o: ../../include/openssl/sha.h ../../include/openssl/stack.h
-conf_mall.o: ../../include/openssl/symhacks.h ../../include/openssl/x509.h
-conf_mall.o: ../../include/openssl/x509_vfy.h ../cryptlib.h conf_mall.c
-conf_mod.o: ../../e_os.h ../../include/openssl/asn1.h
-conf_mod.o: ../../include/openssl/bio.h ../../include/openssl/buffer.h
-conf_mod.o: ../../include/openssl/conf.h ../../include/openssl/crypto.h
-conf_mod.o: ../../include/openssl/dso.h ../../include/openssl/e_os2.h
-conf_mod.o: ../../include/openssl/ec.h ../../include/openssl/ecdh.h
-conf_mod.o: ../../include/openssl/ecdsa.h ../../include/openssl/err.h
-conf_mod.o: ../../include/openssl/evp.h ../../include/openssl/lhash.h
-conf_mod.o: ../../include/openssl/obj_mac.h ../../include/openssl/objects.h
-conf_mod.o: ../../include/openssl/opensslconf.h
-conf_mod.o: ../../include/openssl/opensslv.h ../../include/openssl/ossl_typ.h
-conf_mod.o: ../../include/openssl/pkcs7.h ../../include/openssl/safestack.h
-conf_mod.o: ../../include/openssl/sha.h ../../include/openssl/stack.h
-conf_mod.o: ../../include/openssl/symhacks.h ../../include/openssl/x509.h
-conf_mod.o: ../../include/openssl/x509_vfy.h ../cryptlib.h conf_mod.c
-conf_sap.o: ../../e_os.h ../../include/openssl/asn1.h
-conf_sap.o: ../../include/openssl/bio.h ../../include/openssl/buffer.h
-conf_sap.o: ../../include/openssl/conf.h ../../include/openssl/crypto.h
-conf_sap.o: ../../include/openssl/dso.h ../../include/openssl/e_os2.h
-conf_sap.o: ../../include/openssl/ec.h ../../include/openssl/ecdh.h
-conf_sap.o: ../../include/openssl/ecdsa.h ../../include/openssl/engine.h
-conf_sap.o: ../../include/openssl/err.h ../../include/openssl/evp.h
-conf_sap.o: ../../include/openssl/lhash.h ../../include/openssl/obj_mac.h
-conf_sap.o: ../../include/openssl/objects.h ../../include/openssl/opensslconf.h
-conf_sap.o: ../../include/openssl/opensslv.h ../../include/openssl/ossl_typ.h
-conf_sap.o: ../../include/openssl/pkcs7.h ../../include/openssl/safestack.h
-conf_sap.o: ../../include/openssl/sha.h ../../include/openssl/stack.h
-conf_sap.o: ../../include/openssl/symhacks.h ../../include/openssl/x509.h
-conf_sap.o: ../../include/openssl/x509_vfy.h ../cryptlib.h conf_sap.c
diff --git a/crypto/openssl/crypto/conf/README b/crypto/openssl/crypto/conf/README
deleted file mode 100644
index ca58d0240f57..000000000000
--- a/crypto/openssl/crypto/conf/README
+++ /dev/null
@@ -1,78 +0,0 @@
-WARNING WARNING WARNING!!!
-
-This stuff is experimental, may change radically or be deleted altogether
-before OpenSSL 0.9.7 release. You have been warned!
-
-Configuration modules. These are a set of modules which can perform
-various configuration functions.
-
-Currently the routines should be called at most once when an application
-starts up: that is before it starts any threads.
-
-The routines read a configuration file set up like this:
-
------
-#default section
-openssl_init=init_section
-
-[init_section]
-
-module1=value1
-#Second instance of module1
-module1.1=valueX
-module2=value2
-module3=dso_literal
-module4=dso_section
-
-[dso_section]
-
-path=/some/path/to/some/dso.so
-other_stuff=other_value
-----
-
-When this file is loaded a configuration module with the specified
-string (module* in the above example) is looked up and its init
-function called as:
-
-int conf_init_func(CONF_IMODULE *md, CONF *cnf);
-
-The function can then take whatever action is appropriate, for example
-further lookups based on the value. Multiple instances of the same 
-config module can be loaded.
-
-When the application closes down the modules are cleaned up by calling
-an optional finish function:
-
-void conf_finish_func(CONF_IMODULE *md);
-
-The finish functions are called in reverse order: that is the last module
-loaded is the first one cleaned up.
-
-If no module exists with a given name then an attempt is made to load
-a DSO with the supplied name. This might mean that "module3" attempts
-to load a DSO called libmodule3.so or module3.dll for example. An explicit
-DSO name can be given by including a separate section as in the module4 example
-above.
-
-The DSO is expected to at least contain an initialization function:
-
-int OPENSSL_init(CONF_IMODULE *md, CONF *cnf);
-
-and may also include a finish function:
-
-void OPENSSL_finish(CONF_IMODULE *md);
-
-Static modules can also be added using,
-
-int CONF_module_add(char *name, dso_mod_init_func *ifunc, dso_mod_finish_func *ffunc);
-
-where "name" is the name in the configuration file this function corresponds to.
-
-A set of builtin modules (currently only an ASN1 non functional test module) can be 
-added by calling OPENSSL_load_builtin_modules(). 
-
-The function OPENSSL_config() is intended as a simple configuration function that
-any application can call to perform various default configuration tasks. It uses the
-file openssl.cnf in the usual locations.
-
-
diff --git a/crypto/openssl/crypto/conf/cnf_save.c b/crypto/openssl/crypto/conf/cnf_save.c
deleted file mode 100644
index 1439487526b7..000000000000
--- a/crypto/openssl/crypto/conf/cnf_save.c
+++ /dev/null
@@ -1,106 +0,0 @@
-/* crypto/conf/cnf_save.c */
-/* Copyright (C) 1995-1998 Eric Young (eay@cryptsoft.com)
- * All rights reserved.
- *
- * This package is an SSL implementation written
- * by Eric Young (eay@cryptsoft.com).
- * The implementation was written so as to conform with Netscapes SSL.
- * 
- * This library is free for commercial and non-commercial use as long as
- * the following conditions are aheared to.  The following conditions
- * apply to all code found in this distribution, be it the RC4, RSA,
- * lhash, DES, etc., code; not just the SSL code.  The SSL documentation
- * included with this distribution is covered by the same copyright terms
- * except that the holder is Tim Hudson (tjh@cryptsoft.com).
- * 
- * Copyright remains Eric Young's, and as such any Copyright notices in
- * the code are not to be removed.
- * If this package is used in a product, Eric Young should be given attribution
- * as the author of the parts of the library used.
- * This can be in the form of a textual message at program startup or
- * in documentation (online or textual) provided with the package.
- * 
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions
- * are met:
- * 1. Redistributions of source code must retain the copyright
- *    notice, this list of conditions and the following disclaimer.
- * 2. Redistributions in binary form must reproduce the above copyright
- *    notice, this list of conditions and the following disclaimer in the
- *    documentation and/or other materials provided with the distribution.
- * 3. All advertising materials mentioning features or use of this software
- *    must display the following acknowledgement:
- *    "This product includes cryptographic software written by
- *     Eric Young (eay@cryptsoft.com)"
- *    The word 'cryptographic' can be left out if the rouines from the library
- *    being used are not cryptographic related :-).
- * 4. If you include any Windows specific code (or a derivative thereof) from 
- *    the apps directory (application code) you must include an acknowledgement:
- *    "This product includes software written by Tim Hudson (tjh@cryptsoft.com)"
- * 
- * THIS SOFTWARE IS PROVIDED BY ERIC YOUNG ``AS IS'' AND
- * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
- * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
- * ARE DISCLAIMED.  IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE
- * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
- * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
- * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
- * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
- * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
- * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
- * SUCH DAMAGE.
- * 
- * The licence and distribution terms for any publically available version or
- * derivative of this code cannot be changed.  i.e. this code cannot simply be
- * copied and put under another distribution licence
- * [including the GNU Public Licence.]
- */
-
-#include <stdio.h>
-#include <openssl/conf.h>
-
-static void print_conf(CONF_VALUE *cv);
-static IMPLEMENT_LHASH_DOALL_FN(print_conf, CONF_VALUE *);
-
-main()
-	{
-	LHASH *conf;
-	long l;
-
-	conf=CONF_load(NULL,"../../apps/openssl.cnf",&l);
-	if (conf == NULL)
-		{
-		fprintf(stderr,"error loading config, line %ld\n",l);
-		exit(1);
-		}
-
-	lh_doall(conf,LHASH_DOALL_FN(print_conf));
-	}
-
-
-static void print_conf(CONF_VALUE *cv)
-	{
-	int i;
-	CONF_VALUE *v;
-	char *section;
-	char *name;
-	char *value;
-	STACK *s;
-
-	/* If it is a single entry, return */
-
-	if (cv->name != NULL) return;
-
-	printf("[ %s ]\n",cv->section);
-	s=(STACK *)cv->value;
-
-	for (i=0; i<sk_num(s); i++)
-		{
-		v=(CONF_VALUE *)sk_value(s,i);
-		section=(v->section == NULL)?"None":v->section;
-		name=(v->name == NULL)?"None":v->name;
-		value=(v->value == NULL)?"None":v->value;
-		printf("%s=%s\n",name,value);
-		}
-	printf("\n");
-	}
diff --git a/crypto/openssl/crypto/conf/conf.h b/crypto/openssl/crypto/conf/conf.h
deleted file mode 100644
index 4c073dd83171..000000000000
--- a/crypto/openssl/crypto/conf/conf.h
+++ /dev/null
@@ -1,253 +0,0 @@
-/* crypto/conf/conf.h */
-/* Copyright (C) 1995-1998 Eric Young (eay@cryptsoft.com)
- * All rights reserved.
- *
- * This package is an SSL implementation written
- * by Eric Young (eay@cryptsoft.com).
- * The implementation was written so as to conform with Netscapes SSL.
- * 
- * This library is free for commercial and non-commercial use as long as
- * the following conditions are aheared to.  The following conditions
- * apply to all code found in this distribution, be it the RC4, RSA,
- * lhash, DES, etc., code; not just the SSL code.  The SSL documentation
- * included with this distribution is covered by the same copyright terms
- * except that the holder is Tim Hudson (tjh@cryptsoft.com).
- * 
- * Copyright remains Eric Young's, and as such any Copyright notices in
- * the code are not to be removed.
- * If this package is used in a product, Eric Young should be given attribution
- * as the author of the parts of the library used.
- * This can be in the form of a textual message at program startup or
- * in documentation (online or textual) provided with the package.
- * 
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions
- * are met:
- * 1. Redistributions of source code must retain the copyright
- *    notice, this list of conditions and the following disclaimer.
- * 2. Redistributions in binary form must reproduce the above copyright
- *    notice, this list of conditions and the following disclaimer in the
- *    documentation and/or other materials provided with the distribution.
- * 3. All advertising materials mentioning features or use of this software
- *    must display the following acknowledgement:
- *    "This product includes cryptographic software written by
- *     Eric Young (eay@cryptsoft.com)"
- *    The word 'cryptographic' can be left out if the rouines from the library
- *    being used are not cryptographic related :-).
- * 4. If you include any Windows specific code (or a derivative thereof) from 
- *    the apps directory (application code) you must include an acknowledgement:
- *    "This product includes software written by Tim Hudson (tjh@cryptsoft.com)"
- * 
- * THIS SOFTWARE IS PROVIDED BY ERIC YOUNG ``AS IS'' AND
- * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
- * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
- * ARE DISCLAIMED.  IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE
- * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
- * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
- * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
- * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
- * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
- * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
- * SUCH DAMAGE.
- * 
- * The licence and distribution terms for any publically available version or
- * derivative of this code cannot be changed.  i.e. this code cannot simply be
- * copied and put under another distribution licence
- * [including the GNU Public Licence.]
- */
-
-#ifndef  HEADER_CONF_H
-#define HEADER_CONF_H
-
-#include <openssl/bio.h>
-#include <openssl/lhash.h>
-#include <openssl/stack.h>
-#include <openssl/safestack.h>
-#include <openssl/e_os2.h>
-
-#include <openssl/ossl_typ.h>
-
-#ifdef  __cplusplus
-extern "C" {
-#endif
-
-typedef struct
-	{
-	char *section;
-	char *name;
-	char *value;
-	} CONF_VALUE;
-
-DECLARE_STACK_OF(CONF_VALUE)
-DECLARE_STACK_OF(CONF_MODULE)
-DECLARE_STACK_OF(CONF_IMODULE)
-
-struct conf_st;
-struct conf_method_st;
-typedef struct conf_method_st CONF_METHOD;
-
-struct conf_method_st
-	{
-	const char *name;
-	CONF *(*create)(CONF_METHOD *meth);
-	int (*init)(CONF *conf);
-	int (*destroy)(CONF *conf);
-	int (*destroy_data)(CONF *conf);
-	int (*load_bio)(CONF *conf, BIO *bp, long *eline);
-	int (*dump)(const CONF *conf, BIO *bp);
-	int (*is_number)(const CONF *conf, char c);
-	int (*to_int)(const CONF *conf, char c);
-	int (*load)(CONF *conf, const char *name, long *eline);
-	};
-
-/* Module definitions */
-
-typedef struct conf_imodule_st CONF_IMODULE;
-typedef struct conf_module_st CONF_MODULE;
-
-/* DSO module function typedefs */
-typedef int conf_init_func(CONF_IMODULE *md, const CONF *cnf);
-typedef void conf_finish_func(CONF_IMODULE *md);
-
-#define	CONF_MFLAGS_IGNORE_ERRORS	0x1
-#define CONF_MFLAGS_IGNORE_RETURN_CODES	0x2
-#define CONF_MFLAGS_SILENT		0x4
-#define CONF_MFLAGS_NO_DSO		0x8
-#define CONF_MFLAGS_IGNORE_MISSING_FILE	0x10
-
-int CONF_set_default_method(CONF_METHOD *meth);
-void CONF_set_nconf(CONF *conf,LHASH *hash);
-LHASH *CONF_load(LHASH *conf,const char *file,long *eline);
-#ifndef OPENSSL_NO_FP_API
-LHASH *CONF_load_fp(LHASH *conf, FILE *fp,long *eline);
-#endif
-LHASH *CONF_load_bio(LHASH *conf, BIO *bp,long *eline);
-STACK_OF(CONF_VALUE) *CONF_get_section(LHASH *conf,const char *section);
-char *CONF_get_string(LHASH *conf,const char *group,const char *name);
-long CONF_get_number(LHASH *conf,const char *group,const char *name);
-void CONF_free(LHASH *conf);
-int CONF_dump_fp(LHASH *conf, FILE *out);
-int CONF_dump_bio(LHASH *conf, BIO *out);
-
-void OPENSSL_config(const char *config_name);
-void OPENSSL_no_config(void);
-
-/* New conf code.  The semantics are different from the functions above.
-   If that wasn't the case, the above functions would have been replaced */
-
-struct conf_st
-	{
-	CONF_METHOD *meth;
-	void *meth_data;
-	LHASH *data;
-	};
-
-CONF *NCONF_new(CONF_METHOD *meth);
-CONF_METHOD *NCONF_default(void);
-CONF_METHOD *NCONF_WIN32(void);
-#if 0 /* Just to give you an idea of what I have in mind */
-CONF_METHOD *NCONF_XML(void);
-#endif
-void NCONF_free(CONF *conf);
-void NCONF_free_data(CONF *conf);
-
-int NCONF_load(CONF *conf,const char *file,long *eline);
-#ifndef OPENSSL_NO_FP_API
-int NCONF_load_fp(CONF *conf, FILE *fp,long *eline);
-#endif
-int NCONF_load_bio(CONF *conf, BIO *bp,long *eline);
-STACK_OF(CONF_VALUE) *NCONF_get_section(const CONF *conf,const char *section);
-char *NCONF_get_string(const CONF *conf,const char *group,const char *name);
-int NCONF_get_number_e(const CONF *conf,const char *group,const char *name,
-		       long *result);
-int NCONF_dump_fp(const CONF *conf, FILE *out);
-int NCONF_dump_bio(const CONF *conf, BIO *out);
-
-#if 0 /* The following function has no error checking,
-	 and should therefore be avoided */
-long NCONF_get_number(CONF *conf,char *group,char *name);
-#else
-#define NCONF_get_number(c,g,n,r) NCONF_get_number_e(c,g,n,r)
-#endif
-  
-/* Module functions */
-
-int CONF_modules_load(const CONF *cnf, const char *appname,
-		      unsigned long flags);
-int CONF_modules_load_file(const char *filename, const char *appname,
-			   unsigned long flags);
-void CONF_modules_unload(int all);
-void CONF_modules_finish(void);
-void CONF_modules_free(void);
-int CONF_module_add(const char *name, conf_init_func *ifunc,
-		    conf_finish_func *ffunc);
-
-const char *CONF_imodule_get_name(const CONF_IMODULE *md);
-const char *CONF_imodule_get_value(const CONF_IMODULE *md);
-void *CONF_imodule_get_usr_data(const CONF_IMODULE *md);
-void CONF_imodule_set_usr_data(CONF_IMODULE *md, void *usr_data);
-CONF_MODULE *CONF_imodule_get_module(const CONF_IMODULE *md);
-unsigned long CONF_imodule_get_flags(const CONF_IMODULE *md);
-void CONF_imodule_set_flags(CONF_IMODULE *md, unsigned long flags);
-void *CONF_module_get_usr_data(CONF_MODULE *pmod);
-void CONF_module_set_usr_data(CONF_MODULE *pmod, void *usr_data);
-
-char *CONF_get1_default_config_file(void);
-
-int CONF_parse_list(const char *list, int sep, int nospc,
-	int (*list_cb)(const char *elem, int len, void *usr), void *arg);
-
-void OPENSSL_load_builtin_modules(void);
-
-/* BEGIN ERROR CODES */
-/* The following lines are auto generated by the script mkerr.pl. Any changes
- * made after this point may be overwritten when the script is next run.
- */
-void ERR_load_CONF_strings(void);
-
-/* Error codes for the CONF functions. */
-
-/* Function codes. */
-#define CONF_F_CONF_DUMP_FP				 104
-#define CONF_F_CONF_LOAD				 100
-#define CONF_F_CONF_LOAD_BIO				 102
-#define CONF_F_CONF_LOAD_FP				 103
-#define CONF_F_CONF_MODULES_LOAD			 116
-#define CONF_F_DEF_LOAD					 120
-#define CONF_F_DEF_LOAD_BIO				 121
-#define CONF_F_MODULE_INIT				 115
-#define CONF_F_MODULE_LOAD_DSO				 117
-#define CONF_F_MODULE_RUN				 118
-#define CONF_F_NCONF_DUMP_BIO				 105
-#define CONF_F_NCONF_DUMP_FP				 106
-#define CONF_F_NCONF_GET_NUMBER				 107
-#define CONF_F_NCONF_GET_NUMBER_E			 112
-#define CONF_F_NCONF_GET_SECTION			 108
-#define CONF_F_NCONF_GET_STRING				 109
-#define CONF_F_NCONF_LOAD				 113
-#define CONF_F_NCONF_LOAD_BIO				 110
-#define CONF_F_NCONF_LOAD_FP				 114
-#define CONF_F_NCONF_NEW				 111
-#define CONF_F_STR_COPY					 101
-
-/* Reason codes. */
-#define CONF_R_ERROR_LOADING_DSO			 110
-#define CONF_R_MISSING_CLOSE_SQUARE_BRACKET		 100
-#define CONF_R_MISSING_EQUAL_SIGN			 101
-#define CONF_R_MISSING_FINISH_FUNCTION			 111
-#define CONF_R_MISSING_INIT_FUNCTION			 112
-#define CONF_R_MODULE_INITIALIZATION_ERROR		 109
-#define CONF_R_NO_CLOSE_BRACE				 102
-#define CONF_R_NO_CONF					 105
-#define CONF_R_NO_CONF_OR_ENVIRONMENT_VARIABLE		 106
-#define CONF_R_NO_SECTION				 107
-#define CONF_R_NO_SUCH_FILE				 114
-#define CONF_R_NO_VALUE					 108
-#define CONF_R_UNABLE_TO_CREATE_NEW_SECTION		 103
-#define CONF_R_UNKNOWN_MODULE_NAME			 113
-#define CONF_R_VARIABLE_HAS_NO_VALUE			 104
-
-#ifdef  __cplusplus
-}
-#endif
-#endif
diff --git a/crypto/openssl/crypto/conf/conf_api.c b/crypto/openssl/crypto/conf/conf_api.c
deleted file mode 100644
index 0032baa7119b..000000000000
--- a/crypto/openssl/crypto/conf/conf_api.c
+++ /dev/null
@@ -1,308 +0,0 @@
-/* conf_api.c */
-/* Copyright (C) 1995-1998 Eric Young (eay@cryptsoft.com)
- * All rights reserved.
- *
- * This package is an SSL implementation written
- * by Eric Young (eay@cryptsoft.com).
- * The implementation was written so as to conform with Netscapes SSL.
- * 
- * This library is free for commercial and non-commercial use as long as
- * the following conditions are aheared to.  The following conditions
- * apply to all code found in this distribution, be it the RC4, RSA,
- * lhash, DES, etc., code; not just the SSL code.  The SSL documentation
- * included with this distribution is covered by the same copyright terms
- * except that the holder is Tim Hudson (tjh@cryptsoft.com).
- * 
- * Copyright remains Eric Young's, and as such any Copyright notices in
- * the code are not to be removed.
- * If this package is used in a product, Eric Young should be given attribution
- * as the author of the parts of the library used.
- * This can be in the form of a textual message at program startup or
- * in documentation (online or textual) provided with the package.
- * 
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions
- * are met:
- * 1. Redistributions of source code must retain the copyright
- *    notice, this list of conditions and the following disclaimer.
- * 2. Redistributions in binary form must reproduce the above copyright
- *    notice, this list of conditions and the following disclaimer in the
- *    documentation and/or other materials provided with the distribution.
- * 3. All advertising materials mentioning features or use of this software
- *    must display the following acknowledgement:
- *    "This product includes cryptographic software written by
- *     Eric Young (eay@cryptsoft.com)"
- *    The word 'cryptographic' can be left out if the rouines from the library
- *    being used are not cryptographic related :-).
- * 4. If you include any Windows specific code (or a derivative thereof) from 
- *    the apps directory (application code) you must include an acknowledgement:
- *    "This product includes software written by Tim Hudson (tjh@cryptsoft.com)"
- * 
- * THIS SOFTWARE IS PROVIDED BY ERIC YOUNG ``AS IS'' AND
- * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
- * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
- * ARE DISCLAIMED.  IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE
- * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
- * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
- * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
- * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
- * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
- * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
- * SUCH DAMAGE.
- * 
- * The licence and distribution terms for any publically available version or
- * derivative of this code cannot be changed.  i.e. this code cannot simply be
- * copied and put under another distribution licence
- * [including the GNU Public Licence.]
- */
-
-/* Part of the code in here was originally in conf.c, which is now removed */
-
-#ifndef CONF_DEBUG
-# undef NDEBUG /* avoid conflicting definitions */
-# define NDEBUG
-#endif
-
-#include <assert.h>
-#include <string.h>
-#include <openssl/conf.h>
-#include <openssl/conf_api.h>
-#include "e_os.h"
-
-static void value_free_hash(CONF_VALUE *a, LHASH *conf);
-static void value_free_stack(CONF_VALUE *a,LHASH *conf);
-static IMPLEMENT_LHASH_DOALL_ARG_FN(value_free_hash, CONF_VALUE *, LHASH *)
-static IMPLEMENT_LHASH_DOALL_ARG_FN(value_free_stack, CONF_VALUE *, LHASH *)
-/* We don't use function pointer casting or wrapper functions - but cast each
- * callback parameter inside the callback functions. */
-/* static unsigned long hash(CONF_VALUE *v); */
-static unsigned long hash(const void *v_void);
-/* static int cmp_conf(CONF_VALUE *a,CONF_VALUE *b); */
-static int cmp_conf(const void *a_void,const void *b_void);
-
-/* Up until OpenSSL 0.9.5a, this was get_section */
-CONF_VALUE *_CONF_get_section(const CONF *conf, const char *section)
-	{
-	CONF_VALUE *v,vv;
-
-	if ((conf == NULL) || (section == NULL)) return(NULL);
-	vv.name=NULL;
-	vv.section=(char *)section;
-	v=(CONF_VALUE *)lh_retrieve(conf->data,&vv);
-	return(v);
-	}
-
-/* Up until OpenSSL 0.9.5a, this was CONF_get_section */
-STACK_OF(CONF_VALUE) *_CONF_get_section_values(const CONF *conf,
-					       const char *section)
-	{
-	CONF_VALUE *v;
-
-	v=_CONF_get_section(conf,section);
-	if (v != NULL)
-		return((STACK_OF(CONF_VALUE) *)v->value);
-	else
-		return(NULL);
-	}
-
-int _CONF_add_string(CONF *conf, CONF_VALUE *section, CONF_VALUE *value)
-	{
-	CONF_VALUE *v = NULL;
-	STACK_OF(CONF_VALUE) *ts;
-
-	ts = (STACK_OF(CONF_VALUE) *)section->value;
-
-	value->section=section->section;	
-	if (!sk_CONF_VALUE_push(ts,value))
-		{
-		return 0;
-		}
-
-	v = (CONF_VALUE *)lh_insert(conf->data, value);
-	if (v != NULL)
-		{
-		sk_CONF_VALUE_delete_ptr(ts,v);
-		OPENSSL_free(v->name);
-		OPENSSL_free(v->value);
-		OPENSSL_free(v);
-		}
-	return 1;
-	}
-
-char *_CONF_get_string(const CONF *conf, const char *section, const char *name)
-	{
-	CONF_VALUE *v,vv;
-	char *p;
-
-	if (name == NULL) return(NULL);
-	if (conf != NULL)
-		{
-		if (section != NULL)
-			{
-			vv.name=(char *)name;
-			vv.section=(char *)section;
-			v=(CONF_VALUE *)lh_retrieve(conf->data,&vv);
-			if (v != NULL) return(v->value);
-			if (strcmp(section,"ENV") == 0)
-				{
-				p=Getenv(name);
-				if (p != NULL) return(p);
-				}
-			}
-		vv.section="default";
-		vv.name=(char *)name;
-		v=(CONF_VALUE *)lh_retrieve(conf->data,&vv);
-		if (v != NULL)
-			return(v->value);
-		else
-			return(NULL);
-		}
-	else
-		return(Getenv(name));
-	}
-
-#if 0 /* There's no way to provide error checking with this function, so
-	 force implementors of the higher levels to get a string and read
-	 the number themselves. */
-long _CONF_get_number(CONF *conf, char *section, char *name)
-	{
-	char *str;
-	long ret=0;
-
-	str=_CONF_get_string(conf,section,name);
-	if (str == NULL) return(0);
-	for (;;)
-		{
-		if (conf->meth->is_number(conf, *str))
-			ret=ret*10+conf->meth->to_int(conf, *str);
-		else
-			return(ret);
-		str++;
-		}
-	}
-#endif
-
-int _CONF_new_data(CONF *conf)
-	{
-	if (conf == NULL)
-		{
-		return 0;
-		}
-	if (conf->data == NULL)
-		if ((conf->data = lh_new(hash, cmp_conf)) == NULL)
-			{
-			return 0;
-			}
-	return 1;
-	}
-
-void _CONF_free_data(CONF *conf)
-	{
-	if (conf == NULL || conf->data == NULL) return;
-
-	conf->data->down_load=0; /* evil thing to make sure the 'OPENSSL_free()'
-				  * works as expected */
-	lh_doall_arg(conf->data, LHASH_DOALL_ARG_FN(value_free_hash),
-			conf->data);
-
-	/* We now have only 'section' entries in the hash table.
-	 * Due to problems with */
-
-	lh_doall_arg(conf->data, LHASH_DOALL_ARG_FN(value_free_stack),
-			conf->data);
-	lh_free(conf->data);
-	}
-
-static void value_free_hash(CONF_VALUE *a, LHASH *conf)
-	{
-	if (a->name != NULL)
-		{
-		a=(CONF_VALUE *)lh_delete(conf,a);
-		}
-	}
-
-static void value_free_stack(CONF_VALUE *a, LHASH *conf)
-	{
-	CONF_VALUE *vv;
-	STACK *sk;
-	int i;
-
-	if (a->name != NULL) return;
-
-	sk=(STACK *)a->value;
-	for (i=sk_num(sk)-1; i>=0; i--)
-		{
-		vv=(CONF_VALUE *)sk_value(sk,i);
-		OPENSSL_free(vv->value);
-		OPENSSL_free(vv->name);
-		OPENSSL_free(vv);
-		}
-	if (sk != NULL) sk_free(sk);
-	OPENSSL_free(a->section);
-	OPENSSL_free(a);
-	}
-
-/* static unsigned long hash(CONF_VALUE *v) */
-static unsigned long hash(const void *v_void)
-	{
-	CONF_VALUE *v = (CONF_VALUE *)v_void;
-	return((lh_strhash(v->section)<<2)^lh_strhash(v->name));
-	}
-
-/* static int cmp_conf(CONF_VALUE *a, CONF_VALUE *b) */
-static int cmp_conf(const void *a_void,const  void *b_void)
-	{
-	int i;
-	CONF_VALUE *a = (CONF_VALUE *)a_void;
-	CONF_VALUE *b = (CONF_VALUE *)b_void;
-
-	if (a->section != b->section)
-		{
-		i=strcmp(a->section,b->section);
-		if (i) return(i);
-		}
-
-	if ((a->name != NULL) && (b->name != NULL))
-		{
-		i=strcmp(a->name,b->name);
-		return(i);
-		}
-	else if (a->name == b->name)
-		return(0);
-	else
-		return((a->name == NULL)?-1:1);
-	}
-
-/* Up until OpenSSL 0.9.5a, this was new_section */
-CONF_VALUE *_CONF_new_section(CONF *conf, const char *section)
-	{
-	STACK *sk=NULL;
-	int ok=0,i;
-	CONF_VALUE *v=NULL,*vv;
-
-	if ((sk=sk_new_null()) == NULL)
-		goto err;
-	if ((v=(CONF_VALUE *)OPENSSL_malloc(sizeof(CONF_VALUE))) == NULL)
-		goto err;
-	i=strlen(section)+1;
-	if ((v->section=(char *)OPENSSL_malloc(i)) == NULL)
-		goto err;
-
-	memcpy(v->section,section,i);
-	v->name=NULL;
-	v->value=(char *)sk;
-	
-	vv=(CONF_VALUE *)lh_insert(conf->data,v);
-	assert(vv == NULL);
-	ok=1;
-err:
-	if (!ok)
-		{
-		if (sk != NULL) sk_free(sk);
-		if (v != NULL) OPENSSL_free(v);
-		v=NULL;
-		}
-	return(v);
-	}
-
-IMPLEMENT_STACK_OF(CONF_VALUE)
diff --git a/crypto/openssl/crypto/conf/conf_api.h b/crypto/openssl/crypto/conf/conf_api.h
deleted file mode 100644
index 87a954aff63b..000000000000
--- a/crypto/openssl/crypto/conf/conf_api.h
+++ /dev/null
@@ -1,89 +0,0 @@
-/* conf_api.h */
-/* Copyright (C) 1995-1998 Eric Young (eay@cryptsoft.com)
- * All rights reserved.
- *
- * This package is an SSL implementation written
- * by Eric Young (eay@cryptsoft.com).
- * The implementation was written so as to conform with Netscapes SSL.
- * 
- * This library is free for commercial and non-commercial use as long as
- * the following conditions are aheared to.  The following conditions
- * apply to all code found in this distribution, be it the RC4, RSA,
- * lhash, DES, etc., code; not just the SSL code.  The SSL documentation
- * included with this distribution is covered by the same copyright terms
- * except that the holder is Tim Hudson (tjh@cryptsoft.com).
- * 
- * Copyright remains Eric Young's, and as such any Copyright notices in
- * the code are not to be removed.
- * If this package is used in a product, Eric Young should be given attribution
- * as the author of the parts of the library used.
- * This can be in the form of a textual message at program startup or
- * in documentation (online or textual) provided with the package.
- * 
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions
- * are met:
- * 1. Redistributions of source code must retain the copyright
- *    notice, this list of conditions and the following disclaimer.
- * 2. Redistributions in binary form must reproduce the above copyright
- *    notice, this list of conditions and the following disclaimer in the
- *    documentation and/or other materials provided with the distribution.
- * 3. All advertising materials mentioning features or use of this software
- *    must display the following acknowledgement:
- *    "This product includes cryptographic software written by
- *     Eric Young (eay@cryptsoft.com)"
- *    The word 'cryptographic' can be left out if the rouines from the library
- *    being used are not cryptographic related :-).
- * 4. If you include any Windows specific code (or a derivative thereof) from 
- *    the apps directory (application code) you must include an acknowledgement:
- *    "This product includes software written by Tim Hudson (tjh@cryptsoft.com)"
- * 
- * THIS SOFTWARE IS PROVIDED BY ERIC YOUNG ``AS IS'' AND
- * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
- * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
- * ARE DISCLAIMED.  IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE
- * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
- * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
- * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
- * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
- * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
- * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
- * SUCH DAMAGE.
- * 
- * The licence and distribution terms for any publically available version or
- * derivative of this code cannot be changed.  i.e. this code cannot simply be
- * copied and put under another distribution licence
- * [including the GNU Public Licence.]
- */
-
-#ifndef  HEADER_CONF_API_H
-#define HEADER_CONF_API_H
-
-#include <openssl/lhash.h>
-#include <openssl/conf.h>
-
-#ifdef  __cplusplus
-extern "C" {
-#endif
-
-/* Up until OpenSSL 0.9.5a, this was new_section */
-CONF_VALUE *_CONF_new_section(CONF *conf, const char *section);
-/* Up until OpenSSL 0.9.5a, this was get_section */
-CONF_VALUE *_CONF_get_section(const CONF *conf, const char *section);
-/* Up until OpenSSL 0.9.5a, this was CONF_get_section */
-STACK_OF(CONF_VALUE) *_CONF_get_section_values(const CONF *conf,
-					       const char *section);
-
-int _CONF_add_string(CONF *conf, CONF_VALUE *section, CONF_VALUE *value);
-char *_CONF_get_string(const CONF *conf, const char *section,
-		       const char *name);
-long _CONF_get_number(const CONF *conf, const char *section, const char *name);
-
-int _CONF_new_data(CONF *conf);
-void _CONF_free_data(CONF *conf);
-
-#ifdef  __cplusplus
-}
-#endif
-#endif
-
diff --git a/crypto/openssl/crypto/conf/conf_def.c b/crypto/openssl/crypto/conf/conf_def.c
deleted file mode 100644
index d8bce8732a2d..000000000000
--- a/crypto/openssl/crypto/conf/conf_def.c
+++ /dev/null
@@ -1,750 +0,0 @@
-/* crypto/conf/conf.c */
-/* Copyright (C) 1995-1998 Eric Young (eay@cryptsoft.com)
- * All rights reserved.
- *
- * This package is an SSL implementation written
- * by Eric Young (eay@cryptsoft.com).
- * The implementation was written so as to conform with Netscapes SSL.
- * 
- * This library is free for commercial and non-commercial use as long as
- * the following conditions are aheared to.  The following conditions
- * apply to all code found in this distribution, be it the RC4, RSA,
- * lhash, DES, etc., code; not just the SSL code.  The SSL documentation
- * included with this distribution is covered by the same copyright terms
- * except that the holder is Tim Hudson (tjh@cryptsoft.com).
- * 
- * Copyright remains Eric Young's, and as such any Copyright notices in
- * the code are not to be removed.
- * If this package is used in a product, Eric Young should be given attribution
- * as the author of the parts of the library used.
- * This can be in the form of a textual message at program startup or
- * in documentation (online or textual) provided with the package.
- * 
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions
- * are met:
- * 1. Redistributions of source code must retain the copyright
- *    notice, this list of conditions and the following disclaimer.
- * 2. Redistributions in binary form must reproduce the above copyright
- *    notice, this list of conditions and the following disclaimer in the
- *    documentation and/or other materials provided with the distribution.
- * 3. All advertising materials mentioning features or use of this software
- *    must display the following acknowledgement:
- *    "This product includes cryptographic software written by
- *     Eric Young (eay@cryptsoft.com)"
- *    The word 'cryptographic' can be left out if the rouines from the library
- *    being used are not cryptographic related :-).
- * 4. If you include any Windows specific code (or a derivative thereof) from 
- *    the apps directory (application code) you must include an acknowledgement:
- *    "This product includes software written by Tim Hudson (tjh@cryptsoft.com)"
- * 
- * THIS SOFTWARE IS PROVIDED BY ERIC YOUNG ``AS IS'' AND
- * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
- * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
- * ARE DISCLAIMED.  IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE
- * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
- * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
- * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
- * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
- * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
- * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
- * SUCH DAMAGE.
- * 
- * The licence and distribution terms for any publically available version or
- * derivative of this code cannot be changed.  i.e. this code cannot simply be
- * copied and put under another distribution licence
- * [including the GNU Public Licence.]
- */
-
-/* Part of the code in here was originally in conf.c, which is now removed */
-
-#include <stdio.h>
-#include <string.h>
-#include "cryptlib.h"
-#include <openssl/stack.h>
-#include <openssl/lhash.h>
-#include <openssl/conf.h>
-#include <openssl/conf_api.h>
-#include "conf_def.h"
-#include <openssl/buffer.h>
-#include <openssl/err.h>
-
-static char *eat_ws(CONF *conf, char *p);
-static char *eat_alpha_numeric(CONF *conf, char *p);
-static void clear_comments(CONF *conf, char *p);
-static int str_copy(CONF *conf,char *section,char **to, char *from);
-static char *scan_quote(CONF *conf, char *p);
-static char *scan_dquote(CONF *conf, char *p);
-#define scan_esc(conf,p)	(((IS_EOF((conf),(p)[1]))?((p)+1):((p)+2)))
-
-static CONF *def_create(CONF_METHOD *meth);
-static int def_init_default(CONF *conf);
-static int def_init_WIN32(CONF *conf);
-static int def_destroy(CONF *conf);
-static int def_destroy_data(CONF *conf);
-static int def_load(CONF *conf, const char *name, long *eline);
-static int def_load_bio(CONF *conf, BIO *bp, long *eline);
-static int def_dump(const CONF *conf, BIO *bp);
-static int def_is_number(const CONF *conf, char c);
-static int def_to_int(const CONF *conf, char c);
-
-const char CONF_def_version[]="CONF_def" OPENSSL_VERSION_PTEXT;
-
-static CONF_METHOD default_method = {
-	"OpenSSL default",
-	def_create,
-	def_init_default,
-	def_destroy,
-	def_destroy_data,
-	def_load_bio,
-	def_dump,
-	def_is_number,
-	def_to_int,
-	def_load
-	};
-
-static CONF_METHOD WIN32_method = {
-	"WIN32",
-	def_create,
-	def_init_WIN32,
-	def_destroy,
-	def_destroy_data,
-	def_load_bio,
-	def_dump,
-	def_is_number,
-	def_to_int,
-	def_load
-	};
-
-CONF_METHOD *NCONF_default()
-	{
-	return &default_method;
-	}
-CONF_METHOD *NCONF_WIN32()
-	{
-	return &WIN32_method;
-	}
-
-static CONF *def_create(CONF_METHOD *meth)
-	{
-	CONF *ret;
-
-	ret = (CONF *)OPENSSL_malloc(sizeof(CONF) + sizeof(unsigned short *));
-	if (ret)
-		if (meth->init(ret) == 0)
-			{
-			OPENSSL_free(ret);
-			ret = NULL;
-			}
-	return ret;
-	}
-	
-static int def_init_default(CONF *conf)
-	{
-	if (conf == NULL)
-		return 0;
-
-	conf->meth = &default_method;
-	conf->meth_data = (void *)CONF_type_default;
-	conf->data = NULL;
-
-	return 1;
-	}
-
-static int def_init_WIN32(CONF *conf)
-	{
-	if (conf == NULL)
-		return 0;
-
-	conf->meth = &WIN32_method;
-	conf->meth_data = (void *)CONF_type_win32;
-	conf->data = NULL;
-
-	return 1;
-	}
-
-static int def_destroy(CONF *conf)
-	{
-	if (def_destroy_data(conf))
-		{
-		OPENSSL_free(conf);
-		return 1;
-		}
-	return 0;
-	}
-
-static int def_destroy_data(CONF *conf)
-	{
-	if (conf == NULL)
-		return 0;
-	_CONF_free_data(conf);
-	return 1;
-	}
-
-static int def_load(CONF *conf, const char *name, long *line)
-	{
-	int ret;
-	BIO *in=NULL;
-
-#ifdef OPENSSL_SYS_VMS
-	in=BIO_new_file(name, "r");
-#else
-	in=BIO_new_file(name, "rb");
-#endif
-	if (in == NULL)
-		{
-		if (ERR_GET_REASON(ERR_peek_last_error()) == BIO_R_NO_SUCH_FILE)
-			CONFerr(CONF_F_DEF_LOAD,CONF_R_NO_SUCH_FILE);
-		else
-			CONFerr(CONF_F_DEF_LOAD,ERR_R_SYS_LIB);
-		return 0;
-		}
-
-	ret = def_load_bio(conf, in, line);
-	BIO_free(in);
-
-	return ret;
-	}
-
-static int def_load_bio(CONF *conf, BIO *in, long *line)
-	{
-/* The macro BUFSIZE conflicts with a system macro in VxWorks */
-#define CONFBUFSIZE	512
-	int bufnum=0,i,ii;
-	BUF_MEM *buff=NULL;
-	char *s,*p,*end;
-	int again,n;
-	long eline=0;
-	char btmp[DECIMAL_SIZE(eline)+1];
-	CONF_VALUE *v=NULL,*tv;
-	CONF_VALUE *sv=NULL;
-	char *section=NULL,*buf;
-	STACK_OF(CONF_VALUE) *section_sk=NULL,*ts;
-	char *start,*psection,*pname;
-	void *h = (void *)(conf->data);
-
-	if ((buff=BUF_MEM_new()) == NULL)
-		{
-		CONFerr(CONF_F_DEF_LOAD_BIO,ERR_R_BUF_LIB);
-		goto err;
-		}
-
-	section=(char *)OPENSSL_malloc(10);
-	if (section == NULL)
-		{
-		CONFerr(CONF_F_DEF_LOAD_BIO,ERR_R_MALLOC_FAILURE);
-		goto err;
-		}
-	BUF_strlcpy(section,"default",10);
-
-	if (_CONF_new_data(conf) == 0)
-		{
-		CONFerr(CONF_F_DEF_LOAD_BIO,ERR_R_MALLOC_FAILURE);
-		goto err;
-		}
-
-	sv=_CONF_new_section(conf,section);
-	if (sv == NULL)
-		{
-		CONFerr(CONF_F_DEF_LOAD_BIO,
-					CONF_R_UNABLE_TO_CREATE_NEW_SECTION);
-		goto err;
-		}
-	section_sk=(STACK_OF(CONF_VALUE) *)sv->value;
-
-	bufnum=0;
-	again=0;
-	for (;;)
-		{
-		if (!BUF_MEM_grow(buff,bufnum+CONFBUFSIZE))
-			{
-			CONFerr(CONF_F_DEF_LOAD_BIO,ERR_R_BUF_LIB);
-			goto err;
-			}
-		p= &(buff->data[bufnum]);
-		*p='\0';
-		BIO_gets(in, p, CONFBUFSIZE-1);
-		p[CONFBUFSIZE-1]='\0';
-		ii=i=strlen(p);
-		if (i == 0 && !again) break;
-		again=0;
-		while (i > 0)
-			{
-			if ((p[i-1] != '\r') && (p[i-1] != '\n'))
-				break;
-			else
-				i--;
-			}
-		/* we removed some trailing stuff so there is a new
-		 * line on the end. */
-		if (ii && i == ii)
-			again=1; /* long line */
-		else
-			{
-			p[i]='\0';
-			eline++; /* another input line */
-			}
-
-		/* we now have a line with trailing \r\n removed */
-
-		/* i is the number of bytes */
-		bufnum+=i;
-
-		v=NULL;
-		/* check for line continuation */
-		if (bufnum >= 1)
-			{
-			/* If we have bytes and the last char '\\' and
-			 * second last char is not '\\' */
-			p= &(buff->data[bufnum-1]);
-			if (IS_ESC(conf,p[0]) &&
-				((bufnum <= 1) || !IS_ESC(conf,p[-1])))
-				{
-				bufnum--;
-				again=1;
-				}
-			}
-		if (again) continue;
-		bufnum=0;
-		buf=buff->data;
-
-		clear_comments(conf, buf);
-		n=strlen(buf);
-		s=eat_ws(conf, buf);
-		if (IS_EOF(conf,*s)) continue; /* blank line */
-		if (*s == '[')
-			{
-			char *ss;
-
-			s++;
-			start=eat_ws(conf, s);
-			ss=start;
-again:
-			end=eat_alpha_numeric(conf, ss);
-			p=eat_ws(conf, end);
-			if (*p != ']')
-				{
-				if (*p != '\0')
-					{
-					ss=p;
-					goto again;
-					}
-				CONFerr(CONF_F_DEF_LOAD_BIO,
-					CONF_R_MISSING_CLOSE_SQUARE_BRACKET);
-				goto err;
-				}
-			*end='\0';
-			if (!str_copy(conf,NULL,&section,start)) goto err;
-			if ((sv=_CONF_get_section(conf,section)) == NULL)
-				sv=_CONF_new_section(conf,section);
-			if (sv == NULL)
-				{
-				CONFerr(CONF_F_DEF_LOAD_BIO,
-					CONF_R_UNABLE_TO_CREATE_NEW_SECTION);
-				goto err;
-				}
-			section_sk=(STACK_OF(CONF_VALUE) *)sv->value;
-			continue;
-			}
-		else
-			{
-			pname=s;
-			psection=NULL;
-			end=eat_alpha_numeric(conf, s);
-			if ((end[0] == ':') && (end[1] == ':'))
-				{
-				*end='\0';
-				end+=2;
-				psection=pname;
-				pname=end;
-				end=eat_alpha_numeric(conf, end);
-				}
-			p=eat_ws(conf, end);
-			if (*p != '=')
-				{
-				CONFerr(CONF_F_DEF_LOAD_BIO,
-						CONF_R_MISSING_EQUAL_SIGN);
-				goto err;
-				}
-			*end='\0';
-			p++;
-			start=eat_ws(conf, p);
-			while (!IS_EOF(conf,*p))
-				p++;
-			p--;
-			while ((p != start) && (IS_WS(conf,*p)))
-				p--;
-			p++;
-			*p='\0';
-
-			if (!(v=(CONF_VALUE *)OPENSSL_malloc(sizeof(CONF_VALUE))))
-				{
-				CONFerr(CONF_F_DEF_LOAD_BIO,
-							ERR_R_MALLOC_FAILURE);
-				goto err;
-				}
-			if (psection == NULL) psection=section;
-			v->name=(char *)OPENSSL_malloc(strlen(pname)+1);
-			v->value=NULL;
-			if (v->name == NULL)
-				{
-				CONFerr(CONF_F_DEF_LOAD_BIO,
-							ERR_R_MALLOC_FAILURE);
-				goto err;
-				}
-			BUF_strlcpy(v->name,pname,strlen(pname)+1);
-			if (!str_copy(conf,psection,&(v->value),start)) goto err;
-
-			if (strcmp(psection,section) != 0)
-				{
-				if ((tv=_CONF_get_section(conf,psection))
-					== NULL)
-					tv=_CONF_new_section(conf,psection);
-				if (tv == NULL)
-					{
-					CONFerr(CONF_F_DEF_LOAD_BIO,
-					   CONF_R_UNABLE_TO_CREATE_NEW_SECTION);
-					goto err;
-					}
-				ts=(STACK_OF(CONF_VALUE) *)tv->value;
-				}
-			else
-				{
-				tv=sv;
-				ts=section_sk;
-				}
-#if 1
-			if (_CONF_add_string(conf, tv, v) == 0)
-				{
-				CONFerr(CONF_F_DEF_LOAD_BIO,
-							ERR_R_MALLOC_FAILURE);
-				goto err;
-				}
-#else
-			v->section=tv->section;	
-			if (!sk_CONF_VALUE_push(ts,v))
-				{
-				CONFerr(CONF_F_DEF_LOAD_BIO,
-							ERR_R_MALLOC_FAILURE);
-				goto err;
-				}
-			vv=(CONF_VALUE *)lh_insert(conf->data,v);
-			if (vv != NULL)
-				{
-				sk_CONF_VALUE_delete_ptr(ts,vv);
-				OPENSSL_free(vv->name);
-				OPENSSL_free(vv->value);
-				OPENSSL_free(vv);
-				}
-#endif
-			v=NULL;
-			}
-		}
-	if (buff != NULL) BUF_MEM_free(buff);
-	if (section != NULL) OPENSSL_free(section);
-	return(1);
-err:
-	if (buff != NULL) BUF_MEM_free(buff);
-	if (section != NULL) OPENSSL_free(section);
-	if (line != NULL) *line=eline;
-	BIO_snprintf(btmp,sizeof btmp,"%ld",eline);
-	ERR_add_error_data(2,"line ",btmp);
-	if ((h != conf->data) && (conf->data != NULL))
-		{
-		CONF_free(conf->data);
-		conf->data=NULL;
-		}
-	if (v != NULL)
-		{
-		if (v->name != NULL) OPENSSL_free(v->name);
-		if (v->value != NULL) OPENSSL_free(v->value);
-		if (v != NULL) OPENSSL_free(v);
-		}
-	return(0);
-	}
-
-static void clear_comments(CONF *conf, char *p)
-	{
-	char *to;
-
-	to=p;
-	for (;;)
-		{
-		if (IS_FCOMMENT(conf,*p))
-			{
-			*p='\0';
-			return;
-			}
-		if (!IS_WS(conf,*p))
-			{
-			break;
-			}
-		p++;
-		}
-
-	for (;;)
-		{
-		if (IS_COMMENT(conf,*p))
-			{
-			*p='\0';
-			return;
-			}
-		if (IS_DQUOTE(conf,*p))
-			{
-			p=scan_dquote(conf, p);
-			continue;
-			}
-		if (IS_QUOTE(conf,*p))
-			{
-			p=scan_quote(conf, p);
-			continue;
-			}
-		if (IS_ESC(conf,*p))
-			{
-			p=scan_esc(conf,p);
-			continue;
-			}
-		if (IS_EOF(conf,*p))
-			return;
-		else
-			p++;
-		}
-	}
-
-static int str_copy(CONF *conf, char *section, char **pto, char *from)
-	{
-	int q,r,rr=0,to=0,len=0;
-	char *s,*e,*rp,*p,*rrp,*np,*cp,v;
-	BUF_MEM *buf;
-
-	if ((buf=BUF_MEM_new()) == NULL) return(0);
-
-	len=strlen(from)+1;
-	if (!BUF_MEM_grow(buf,len)) goto err;
-
-	for (;;)
-		{
-		if (IS_QUOTE(conf,*from))
-			{
-			q= *from;
-			from++;
-			while (!IS_EOF(conf,*from) && (*from != q))
-				{
-				if (IS_ESC(conf,*from))
-					{
-					from++;
-					if (IS_EOF(conf,*from)) break;
-					}
-				buf->data[to++]= *(from++);
-				}
-			if (*from == q) from++;
-			}
-		else if (IS_DQUOTE(conf,*from))
-			{
-			q= *from;
-			from++;
-			while (!IS_EOF(conf,*from))
-				{
-				if (*from == q)
-					{
-					if (*(from+1) == q)
-						{
-						from++;
-						}
-					else
-						{
-						break;
-						}
-					}
-				buf->data[to++]= *(from++);
-				}
-			if (*from == q) from++;
-			}
-		else if (IS_ESC(conf,*from))
-			{
-			from++;
-			v= *(from++);
-			if (IS_EOF(conf,v)) break;
-			else if (v == 'r') v='\r';
-			else if (v == 'n') v='\n';
-			else if (v == 'b') v='\b';
-			else if (v == 't') v='\t';
-			buf->data[to++]= v;
-			}
-		else if (IS_EOF(conf,*from))
-			break;
-		else if (*from == '$')
-			{
-			/* try to expand it */
-			rrp=NULL;
-			s= &(from[1]);
-			if (*s == '{')
-				q='}';
-			else if (*s == '(')
-				q=')';
-			else q=0;
-
-			if (q) s++;
-			cp=section;
-			e=np=s;
-			while (IS_ALPHA_NUMERIC(conf,*e))
-				e++;
-			if ((e[0] == ':') && (e[1] == ':'))
-				{
-				cp=np;
-				rrp=e;
-				rr= *e;
-				*rrp='\0';
-				e+=2;
-				np=e;
-				while (IS_ALPHA_NUMERIC(conf,*e))
-					e++;
-				}
-			r= *e;
-			*e='\0';
-			rp=e;
-			if (q)
-				{
-				if (r != q)
-					{
-					CONFerr(CONF_F_STR_COPY,CONF_R_NO_CLOSE_BRACE);
-					goto err;
-					}
-				e++;
-				}
-			/* So at this point we have
-			 * np which is the start of the name string which is
-			 *   '\0' terminated. 
-			 * cp which is the start of the section string which is
-			 *   '\0' terminated.
-			 * e is the 'next point after'.
-			 * r and rr are the chars replaced by the '\0'
-			 * rp and rrp is where 'r' and 'rr' came from.
-			 */
-			p=_CONF_get_string(conf,cp,np);
-			if (rrp != NULL) *rrp=rr;
-			*rp=r;
-			if (p == NULL)
-				{
-				CONFerr(CONF_F_STR_COPY,CONF_R_VARIABLE_HAS_NO_VALUE);
-				goto err;
-				}
-			BUF_MEM_grow_clean(buf,(strlen(p)+buf->length-(e-from)));
-			while (*p)
-				buf->data[to++]= *(p++);
-
-			/* Since we change the pointer 'from', we also have
-			   to change the perceived length of the string it
-			   points at.  /RL */
-			len -= e-from;
-			from=e;
-
-			/* In case there were no braces or parenthesis around
-			   the variable reference, we have to put back the
-			   character that was replaced with a '\0'.  /RL */
-			*rp = r;
-			}
-		else
-			buf->data[to++]= *(from++);
-		}
-	buf->data[to]='\0';
-	if (*pto != NULL) OPENSSL_free(*pto);
-	*pto=buf->data;
-	OPENSSL_free(buf);
-	return(1);
-err:
-	if (buf != NULL) BUF_MEM_free(buf);
-	return(0);
-	}
-
-static char *eat_ws(CONF *conf, char *p)
-	{
-	while (IS_WS(conf,*p) && (!IS_EOF(conf,*p)))
-		p++;
-	return(p);
-	}
-
-static char *eat_alpha_numeric(CONF *conf, char *p)
-	{
-	for (;;)
-		{
-		if (IS_ESC(conf,*p))
-			{
-			p=scan_esc(conf,p);
-			continue;
-			}
-		if (!IS_ALPHA_NUMERIC_PUNCT(conf,*p))
-			return(p);
-		p++;
-		}
-	}
-
-static char *scan_quote(CONF *conf, char *p)
-	{
-	int q= *p;
-
-	p++;
-	while (!(IS_EOF(conf,*p)) && (*p != q))
-		{
-		if (IS_ESC(conf,*p))
-			{
-			p++;
-			if (IS_EOF(conf,*p)) return(p);
-			}
-		p++;
-		}
-	if (*p == q) p++;
-	return(p);
-	}
-
-
-static char *scan_dquote(CONF *conf, char *p)
-	{
-	int q= *p;
-
-	p++;
-	while (!(IS_EOF(conf,*p)))
-		{
-		if (*p == q)
-			{
-			if (*(p+1) == q)
-				{
-				p++;
-				}
-			else
-				{
-				break;
-				}
-			}
-		p++;
-		}
-	if (*p == q) p++;
-	return(p);
-	}
-
-static void dump_value(CONF_VALUE *a, BIO *out)
-	{
-	if (a->name)
-		BIO_printf(out, "[%s] %s=%s\n", a->section, a->name, a->value);
-	else
-		BIO_printf(out, "[[%s]]\n", a->section);
-	}
-
-static IMPLEMENT_LHASH_DOALL_ARG_FN(dump_value, CONF_VALUE *, BIO *)
-
-static int def_dump(const CONF *conf, BIO *out)
-	{
-	lh_doall_arg(conf->data, LHASH_DOALL_ARG_FN(dump_value), out);
-	return 1;
-	}
-
-static int def_is_number(const CONF *conf, char c)
-	{
-	return IS_NUMBER(conf,c);
-	}
-
-static int def_to_int(const CONF *conf, char c)
-	{
-	return c - '0';
-	}
-
diff --git a/crypto/openssl/crypto/conf/conf_def.h b/crypto/openssl/crypto/conf/conf_def.h
deleted file mode 100644
index 92a7d8ad77c9..000000000000
--- a/crypto/openssl/crypto/conf/conf_def.h
+++ /dev/null
@@ -1,180 +0,0 @@
-/* crypto/conf/conf_def.h */
-/* Copyright (C) 1995-1998 Eric Young (eay@cryptsoft.com)
- * All rights reserved.
- *
- * This package is an SSL implementation written
- * by Eric Young (eay@cryptsoft.com).
- * The implementation was written so as to conform with Netscapes SSL.
- * 
- * This library is free for commercial and non-commercial use as long as
- * the following conditions are aheared to.  The following conditions
- * apply to all code found in this distribution, be it the RC4, RSA,
- * lhash, DES, etc., code; not just the SSL code.  The SSL documentation
- * included with this distribution is covered by the same copyright terms
- * except that the holder is Tim Hudson (tjh@cryptsoft.com).
- * 
- * Copyright remains Eric Young's, and as such any Copyright notices in
- * the code are not to be removed.
- * If this package is used in a product, Eric Young should be given attribution
- * as the author of the parts of the library used.
- * This can be in the form of a textual message at program startup or
- * in documentation (online or textual) provided with the package.
- * 
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions
- * are met:
- * 1. Redistributions of source code must retain the copyright
- *    notice, this list of conditions and the following disclaimer.
- * 2. Redistributions in binary form must reproduce the above copyright
- *    notice, this list of conditions and the following disclaimer in the
- *    documentation and/or other materials provided with the distribution.
- * 3. All advertising materials mentioning features or use of this software
- *    must display the following acknowledgement:
- *    "This product includes cryptographic software written by
- *     Eric Young (eay@cryptsoft.com)"
- *    The word 'cryptographic' can be left out if the rouines from the library
- *    being used are not cryptographic related :-).
- * 4. If you include any Windows specific code (or a derivative thereof) from 
- *    the apps directory (application code) you must include an acknowledgement:
- *    "This product includes software written by Tim Hudson (tjh@cryptsoft.com)"
- * 
- * THIS SOFTWARE IS PROVIDED BY ERIC YOUNG ``AS IS'' AND
- * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
- * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
- * ARE DISCLAIMED.  IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE
- * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
- * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
- * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
- * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
- * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
- * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
- * SUCH DAMAGE.
- * 
- * The licence and distribution terms for any publically available version or
- * derivative of this code cannot be changed.  i.e. this code cannot simply be
- * copied and put under another distribution licence
- * [including the GNU Public Licence.]
- */
-
-/* THIS FILE WAS AUTOMAGICALLY GENERATED!
-   Please modify and use keysets.pl to regenerate it. */
-
-#define CONF_NUMBER		1
-#define CONF_UPPER		2
-#define CONF_LOWER		4
-#define CONF_UNDER		256
-#define CONF_PUNCTUATION	512
-#define CONF_WS			16
-#define CONF_ESC		32
-#define CONF_QUOTE		64
-#define CONF_DQUOTE		1024
-#define CONF_COMMENT		128
-#define CONF_FCOMMENT		2048
-#define CONF_EOF		8
-#define CONF_HIGHBIT		4096
-#define CONF_ALPHA		(CONF_UPPER|CONF_LOWER)
-#define CONF_ALPHA_NUMERIC	(CONF_ALPHA|CONF_NUMBER|CONF_UNDER)
-#define CONF_ALPHA_NUMERIC_PUNCT (CONF_ALPHA|CONF_NUMBER|CONF_UNDER| \
-					CONF_PUNCTUATION)
-
-#define KEYTYPES(c)		((unsigned short *)((c)->meth_data))
-#ifndef CHARSET_EBCDIC
-#define IS_COMMENT(c,a)		(KEYTYPES(c)[(a)&0xff]&CONF_COMMENT)
-#define IS_FCOMMENT(c,a)	(KEYTYPES(c)[(a)&0xff]&CONF_FCOMMENT)
-#define IS_EOF(c,a)		(KEYTYPES(c)[(a)&0xff]&CONF_EOF)
-#define IS_ESC(c,a)		(KEYTYPES(c)[(a)&0xff]&CONF_ESC)
-#define IS_NUMBER(c,a)		(KEYTYPES(c)[(a)&0xff]&CONF_NUMBER)
-#define IS_WS(c,a)		(KEYTYPES(c)[(a)&0xff]&CONF_WS)
-#define IS_ALPHA_NUMERIC(c,a)	(KEYTYPES(c)[(a)&0xff]&CONF_ALPHA_NUMERIC)
-#define IS_ALPHA_NUMERIC_PUNCT(c,a) \
-				(KEYTYPES(c)[(a)&0xff]&CONF_ALPHA_NUMERIC_PUNCT)
-#define IS_QUOTE(c,a)		(KEYTYPES(c)[(a)&0xff]&CONF_QUOTE)
-#define IS_DQUOTE(c,a)		(KEYTYPES(c)[(a)&0xff]&CONF_DQUOTE)
-#define IS_HIGHBIT(c,a)		(KEYTYPES(c)[(a)&0xff]&CONF_HIGHBIT)
-
-#else /*CHARSET_EBCDIC*/
-
-#define IS_COMMENT(c,a)		(KEYTYPES(c)[os_toascii[a]&0xff]&CONF_COMMENT)
-#define IS_FCOMMENT(c,a)	(KEYTYPES(c)[os_toascii[a]&0xff]&CONF_FCOMMENT)
-#define IS_EOF(c,a)		(KEYTYPES(c)[os_toascii[a]&0xff]&CONF_EOF)
-#define IS_ESC(c,a)		(KEYTYPES(c)[os_toascii[a]&0xff]&CONF_ESC)
-#define IS_NUMBER(c,a)		(KEYTYPES(c)[os_toascii[a]&0xff]&CONF_NUMBER)
-#define IS_WS(c,a)		(KEYTYPES(c)[os_toascii[a]&0xff]&CONF_WS)
-#define IS_ALPHA_NUMERIC(c,a)	(KEYTYPES(c)[os_toascii[a]&0xff]&CONF_ALPHA_NUMERIC)
-#define IS_ALPHA_NUMERIC_PUNCT(c,a) \
-				(KEYTYPES(c)[os_toascii[a]&0xff]&CONF_ALPHA_NUMERIC_PUNCT)
-#define IS_QUOTE(c,a)		(KEYTYPES(c)[os_toascii[a]&0xff]&CONF_QUOTE)
-#define IS_DQUOTE(c,a)		(KEYTYPES(c)[os_toascii[a]&0xff]&CONF_DQUOTE)
-#define IS_HIGHBIT(c,a)		(KEYTYPES(c)[os_toascii[a]&0xff]&CONF_HIGHBIT)
-#endif /*CHARSET_EBCDIC*/
-
-static unsigned short CONF_type_default[256]={
-	0x0008,0x0000,0x0000,0x0000,0x0000,0x0000,0x0000,0x0000,
-	0x0000,0x0010,0x0010,0x0000,0x0000,0x0010,0x0000,0x0000,
-	0x0000,0x0000,0x0000,0x0000,0x0000,0x0000,0x0000,0x0000,
-	0x0000,0x0000,0x0000,0x0000,0x0000,0x0000,0x0000,0x0000,
-	0x0010,0x0200,0x0040,0x0080,0x0000,0x0200,0x0200,0x0040,
-	0x0000,0x0000,0x0200,0x0200,0x0200,0x0200,0x0200,0x0200,
-	0x0001,0x0001,0x0001,0x0001,0x0001,0x0001,0x0001,0x0001,
-	0x0001,0x0001,0x0000,0x0200,0x0000,0x0000,0x0000,0x0200,
-	0x0200,0x0002,0x0002,0x0002,0x0002,0x0002,0x0002,0x0002,
-	0x0002,0x0002,0x0002,0x0002,0x0002,0x0002,0x0002,0x0002,
-	0x0002,0x0002,0x0002,0x0002,0x0002,0x0002,0x0002,0x0002,
-	0x0002,0x0002,0x0002,0x0000,0x0020,0x0000,0x0200,0x0100,
-	0x0040,0x0004,0x0004,0x0004,0x0004,0x0004,0x0004,0x0004,
-	0x0004,0x0004,0x0004,0x0004,0x0004,0x0004,0x0004,0x0004,
-	0x0004,0x0004,0x0004,0x0004,0x0004,0x0004,0x0004,0x0004,
-	0x0004,0x0004,0x0004,0x0000,0x0200,0x0000,0x0200,0x0000,
-	0x1000,0x1000,0x1000,0x1000,0x1000,0x1000,0x1000,0x1000,
-	0x1000,0x1000,0x1000,0x1000,0x1000,0x1000,0x1000,0x1000,
-	0x1000,0x1000,0x1000,0x1000,0x1000,0x1000,0x1000,0x1000,
-	0x1000,0x1000,0x1000,0x1000,0x1000,0x1000,0x1000,0x1000,
-	0x1000,0x1000,0x1000,0x1000,0x1000,0x1000,0x1000,0x1000,
-	0x1000,0x1000,0x1000,0x1000,0x1000,0x1000,0x1000,0x1000,
-	0x1000,0x1000,0x1000,0x1000,0x1000,0x1000,0x1000,0x1000,
-	0x1000,0x1000,0x1000,0x1000,0x1000,0x1000,0x1000,0x1000,
-	0x1000,0x1000,0x1000,0x1000,0x1000,0x1000,0x1000,0x1000,
-	0x1000,0x1000,0x1000,0x1000,0x1000,0x1000,0x1000,0x1000,
-	0x1000,0x1000,0x1000,0x1000,0x1000,0x1000,0x1000,0x1000,
-	0x1000,0x1000,0x1000,0x1000,0x1000,0x1000,0x1000,0x1000,
-	0x1000,0x1000,0x1000,0x1000,0x1000,0x1000,0x1000,0x1000,
-	0x1000,0x1000,0x1000,0x1000,0x1000,0x1000,0x1000,0x1000,
-	0x1000,0x1000,0x1000,0x1000,0x1000,0x1000,0x1000,0x1000,
-	0x1000,0x1000,0x1000,0x1000,0x1000,0x1000,0x1000,0x1000,
-	};
-
-static unsigned short CONF_type_win32[256]={
-	0x0008,0x0000,0x0000,0x0000,0x0000,0x0000,0x0000,0x0000,
-	0x0000,0x0010,0x0010,0x0000,0x0000,0x0010,0x0000,0x0000,
-	0x0000,0x0000,0x0000,0x0000,0x0000,0x0000,0x0000,0x0000,
-	0x0000,0x0000,0x0000,0x0000,0x0000,0x0000,0x0000,0x0000,
-	0x0010,0x0200,0x0400,0x0000,0x0000,0x0200,0x0200,0x0000,
-	0x0000,0x0000,0x0200,0x0200,0x0200,0x0200,0x0200,0x0200,
-	0x0001,0x0001,0x0001,0x0001,0x0001,0x0001,0x0001,0x0001,
-	0x0001,0x0001,0x0000,0x0A00,0x0000,0x0000,0x0000,0x0200,
-	0x0200,0x0002,0x0002,0x0002,0x0002,0x0002,0x0002,0x0002,
-	0x0002,0x0002,0x0002,0x0002,0x0002,0x0002,0x0002,0x0002,
-	0x0002,0x0002,0x0002,0x0002,0x0002,0x0002,0x0002,0x0002,
-	0x0002,0x0002,0x0002,0x0000,0x0000,0x0000,0x0200,0x0100,
-	0x0000,0x0004,0x0004,0x0004,0x0004,0x0004,0x0004,0x0004,
-	0x0004,0x0004,0x0004,0x0004,0x0004,0x0004,0x0004,0x0004,
-	0x0004,0x0004,0x0004,0x0004,0x0004,0x0004,0x0004,0x0004,
-	0x0004,0x0004,0x0004,0x0000,0x0200,0x0000,0x0200,0x0000,
-	0x1000,0x1000,0x1000,0x1000,0x1000,0x1000,0x1000,0x1000,
-	0x1000,0x1000,0x1000,0x1000,0x1000,0x1000,0x1000,0x1000,
-	0x1000,0x1000,0x1000,0x1000,0x1000,0x1000,0x1000,0x1000,
-	0x1000,0x1000,0x1000,0x1000,0x1000,0x1000,0x1000,0x1000,
-	0x1000,0x1000,0x1000,0x1000,0x1000,0x1000,0x1000,0x1000,
-	0x1000,0x1000,0x1000,0x1000,0x1000,0x1000,0x1000,0x1000,
-	0x1000,0x1000,0x1000,0x1000,0x1000,0x1000,0x1000,0x1000,
-	0x1000,0x1000,0x1000,0x1000,0x1000,0x1000,0x1000,0x1000,
-	0x1000,0x1000,0x1000,0x1000,0x1000,0x1000,0x1000,0x1000,
-	0x1000,0x1000,0x1000,0x1000,0x1000,0x1000,0x1000,0x1000,
-	0x1000,0x1000,0x1000,0x1000,0x1000,0x1000,0x1000,0x1000,
-	0x1000,0x1000,0x1000,0x1000,0x1000,0x1000,0x1000,0x1000,
-	0x1000,0x1000,0x1000,0x1000,0x1000,0x1000,0x1000,0x1000,
-	0x1000,0x1000,0x1000,0x1000,0x1000,0x1000,0x1000,0x1000,
-	0x1000,0x1000,0x1000,0x1000,0x1000,0x1000,0x1000,0x1000,
-	0x1000,0x1000,0x1000,0x1000,0x1000,0x1000,0x1000,0x1000,
-	};
-
diff --git a/crypto/openssl/crypto/conf/conf_err.c b/crypto/openssl/crypto/conf/conf_err.c
deleted file mode 100644
index a16a5e0bd44b..000000000000
--- a/crypto/openssl/crypto/conf/conf_err.c
+++ /dev/null
@@ -1,129 +0,0 @@
-/* crypto/conf/conf_err.c */
-/* ====================================================================
- * Copyright (c) 1999-2005 The OpenSSL Project.  All rights reserved.
- *
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions
- * are met:
- *
- * 1. Redistributions of source code must retain the above copyright
- *    notice, this list of conditions and the following disclaimer. 
- *
- * 2. Redistributions in binary form must reproduce the above copyright
- *    notice, this list of conditions and the following disclaimer in
- *    the documentation and/or other materials provided with the
- *    distribution.
- *
- * 3. All advertising materials mentioning features or use of this
- *    software must display the following acknowledgment:
- *    "This product includes software developed by the OpenSSL Project
- *    for use in the OpenSSL Toolkit. (http://www.OpenSSL.org/)"
- *
- * 4. The names "OpenSSL Toolkit" and "OpenSSL Project" must not be used to
- *    endorse or promote products derived from this software without
- *    prior written permission. For written permission, please contact
- *    openssl-core@OpenSSL.org.
- *
- * 5. Products derived from this software may not be called "OpenSSL"
- *    nor may "OpenSSL" appear in their names without prior written
- *    permission of the OpenSSL Project.
- *
- * 6. Redistributions of any form whatsoever must retain the following
- *    acknowledgment:
- *    "This product includes software developed by the OpenSSL Project
- *    for use in the OpenSSL Toolkit (http://www.OpenSSL.org/)"
- *
- * THIS SOFTWARE IS PROVIDED BY THE OpenSSL PROJECT ``AS IS'' AND ANY
- * EXPRESSED OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
- * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR
- * PURPOSE ARE DISCLAIMED.  IN NO EVENT SHALL THE OpenSSL PROJECT OR
- * ITS CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
- * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
- * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
- * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
- * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
- * STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
- * ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED
- * OF THE POSSIBILITY OF SUCH DAMAGE.
- * ====================================================================
- *
- * This product includes cryptographic software written by Eric Young
- * (eay@cryptsoft.com).  This product includes software written by Tim
- * Hudson (tjh@cryptsoft.com).
- *
- */
-
-/* NOTE: this file was auto generated by the mkerr.pl script: any changes
- * made to it will be overwritten when the script next updates this file,
- * only reason strings will be preserved.
- */
-
-#include <stdio.h>
-#include <openssl/err.h>
-#include <openssl/conf.h>
-
-/* BEGIN ERROR CODES */
-#ifndef OPENSSL_NO_ERR
-
-#define ERR_FUNC(func) ERR_PACK(ERR_LIB_CONF,func,0)
-#define ERR_REASON(reason) ERR_PACK(ERR_LIB_CONF,0,reason)
-
-static ERR_STRING_DATA CONF_str_functs[]=
-	{
-{ERR_FUNC(CONF_F_CONF_DUMP_FP),	"CONF_dump_fp"},
-{ERR_FUNC(CONF_F_CONF_LOAD),	"CONF_load"},
-{ERR_FUNC(CONF_F_CONF_LOAD_BIO),	"CONF_load_bio"},
-{ERR_FUNC(CONF_F_CONF_LOAD_FP),	"CONF_load_fp"},
-{ERR_FUNC(CONF_F_CONF_MODULES_LOAD),	"CONF_modules_load"},
-{ERR_FUNC(CONF_F_DEF_LOAD),	"DEF_LOAD"},
-{ERR_FUNC(CONF_F_DEF_LOAD_BIO),	"DEF_LOAD_BIO"},
-{ERR_FUNC(CONF_F_MODULE_INIT),	"MODULE_INIT"},
-{ERR_FUNC(CONF_F_MODULE_LOAD_DSO),	"MODULE_LOAD_DSO"},
-{ERR_FUNC(CONF_F_MODULE_RUN),	"MODULE_RUN"},
-{ERR_FUNC(CONF_F_NCONF_DUMP_BIO),	"NCONF_dump_bio"},
-{ERR_FUNC(CONF_F_NCONF_DUMP_FP),	"NCONF_dump_fp"},
-{ERR_FUNC(CONF_F_NCONF_GET_NUMBER),	"NCONF_get_number"},
-{ERR_FUNC(CONF_F_NCONF_GET_NUMBER_E),	"NCONF_get_number_e"},
-{ERR_FUNC(CONF_F_NCONF_GET_SECTION),	"NCONF_get_section"},
-{ERR_FUNC(CONF_F_NCONF_GET_STRING),	"NCONF_get_string"},
-{ERR_FUNC(CONF_F_NCONF_LOAD),	"NCONF_load"},
-{ERR_FUNC(CONF_F_NCONF_LOAD_BIO),	"NCONF_load_bio"},
-{ERR_FUNC(CONF_F_NCONF_LOAD_FP),	"NCONF_load_fp"},
-{ERR_FUNC(CONF_F_NCONF_NEW),	"NCONF_new"},
-{ERR_FUNC(CONF_F_STR_COPY),	"STR_COPY"},
-{0,NULL}
-	};
-
-static ERR_STRING_DATA CONF_str_reasons[]=
-	{
-{ERR_REASON(CONF_R_ERROR_LOADING_DSO)    ,"error loading dso"},
-{ERR_REASON(CONF_R_MISSING_CLOSE_SQUARE_BRACKET),"missing close square bracket"},
-{ERR_REASON(CONF_R_MISSING_EQUAL_SIGN)   ,"missing equal sign"},
-{ERR_REASON(CONF_R_MISSING_FINISH_FUNCTION),"missing finish function"},
-{ERR_REASON(CONF_R_MISSING_INIT_FUNCTION),"missing init function"},
-{ERR_REASON(CONF_R_MODULE_INITIALIZATION_ERROR),"module initialization error"},
-{ERR_REASON(CONF_R_NO_CLOSE_BRACE)       ,"no close brace"},
-{ERR_REASON(CONF_R_NO_CONF)              ,"no conf"},
-{ERR_REASON(CONF_R_NO_CONF_OR_ENVIRONMENT_VARIABLE),"no conf or environment variable"},
-{ERR_REASON(CONF_R_NO_SECTION)           ,"no section"},
-{ERR_REASON(CONF_R_NO_SUCH_FILE)         ,"no such file"},
-{ERR_REASON(CONF_R_NO_VALUE)             ,"no value"},
-{ERR_REASON(CONF_R_UNABLE_TO_CREATE_NEW_SECTION),"unable to create new section"},
-{ERR_REASON(CONF_R_UNKNOWN_MODULE_NAME)  ,"unknown module name"},
-{ERR_REASON(CONF_R_VARIABLE_HAS_NO_VALUE),"variable has no value"},
-{0,NULL}
-	};
-
-#endif
-
-void ERR_load_CONF_strings(void)
-	{
-#ifndef OPENSSL_NO_ERR
-
-	if (ERR_func_error_string(CONF_str_functs[0].error) == NULL)
-		{
-		ERR_load_strings(0,CONF_str_functs);
-		ERR_load_strings(0,CONF_str_reasons);
-		}
-#endif
-	}
diff --git a/crypto/openssl/crypto/conf/conf_lib.c b/crypto/openssl/crypto/conf/conf_lib.c
deleted file mode 100644
index 2a3399d269e4..000000000000
--- a/crypto/openssl/crypto/conf/conf_lib.c
+++ /dev/null
@@ -1,401 +0,0 @@
-/* conf_lib.c */
-/* Written by Richard Levitte (richard@levitte.org) for the OpenSSL
- * project 2000.
- */
-/* ====================================================================
- * Copyright (c) 2000 The OpenSSL Project.  All rights reserved.
- *
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions
- * are met:
- *
- * 1. Redistributions of source code must retain the above copyright
- *    notice, this list of conditions and the following disclaimer. 
- *
- * 2. Redistributions in binary form must reproduce the above copyright
- *    notice, this list of conditions and the following disclaimer in
- *    the documentation and/or other materials provided with the
- *    distribution.
- *
- * 3. All advertising materials mentioning features or use of this
- *    software must display the following acknowledgment:
- *    "This product includes software developed by the OpenSSL Project
- *    for use in the OpenSSL Toolkit. (http://www.OpenSSL.org/)"
- *
- * 4. The names "OpenSSL Toolkit" and "OpenSSL Project" must not be used to
- *    endorse or promote products derived from this software without
- *    prior written permission. For written permission, please contact
- *    licensing@OpenSSL.org.
- *
- * 5. Products derived from this software may not be called "OpenSSL"
- *    nor may "OpenSSL" appear in their names without prior written
- *    permission of the OpenSSL Project.
- *
- * 6. Redistributions of any form whatsoever must retain the following
- *    acknowledgment:
- *    "This product includes software developed by the OpenSSL Project
- *    for use in the OpenSSL Toolkit (http://www.OpenSSL.org/)"
- *
- * THIS SOFTWARE IS PROVIDED BY THE OpenSSL PROJECT ``AS IS'' AND ANY
- * EXPRESSED OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
- * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR
- * PURPOSE ARE DISCLAIMED.  IN NO EVENT SHALL THE OpenSSL PROJECT OR
- * ITS CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
- * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
- * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
- * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
- * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
- * STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
- * ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED
- * OF THE POSSIBILITY OF SUCH DAMAGE.
- * ====================================================================
- *
- * This product includes cryptographic software written by Eric Young
- * (eay@cryptsoft.com).  This product includes software written by Tim
- * Hudson (tjh@cryptsoft.com).
- *
- */
-
-#include <stdio.h>
-#include <openssl/crypto.h>
-#include <openssl/err.h>
-#include <openssl/conf.h>
-#include <openssl/conf_api.h>
-#include <openssl/lhash.h>
-
-const char CONF_version[]="CONF" OPENSSL_VERSION_PTEXT;
-
-static CONF_METHOD *default_CONF_method=NULL;
-
-/* Init a 'CONF' structure from an old LHASH */
-
-void CONF_set_nconf(CONF *conf, LHASH *hash)
-	{
-	if (default_CONF_method == NULL)
-		default_CONF_method = NCONF_default();
-
-	default_CONF_method->init(conf);
-	conf->data = hash;
-	}
-
-/* The following section contains the "CONF classic" functions,
-   rewritten in terms of the new CONF interface. */
-
-int CONF_set_default_method(CONF_METHOD *meth)
-	{
-	default_CONF_method = meth;
-	return 1;
-	}
-
-LHASH *CONF_load(LHASH *conf, const char *file, long *eline)
-	{
-	LHASH *ltmp;
-	BIO *in=NULL;
-
-#ifdef OPENSSL_SYS_VMS
-	in=BIO_new_file(file, "r");
-#else
-	in=BIO_new_file(file, "rb");
-#endif
-	if (in == NULL)
-		{
-		CONFerr(CONF_F_CONF_LOAD,ERR_R_SYS_LIB);
-		return NULL;
-		}
-
-	ltmp = CONF_load_bio(conf, in, eline);
-	BIO_free(in);
-
-	return ltmp;
-	}
-
-#ifndef OPENSSL_NO_FP_API
-LHASH *CONF_load_fp(LHASH *conf, FILE *fp,long *eline)
-	{
-	BIO *btmp;
-	LHASH *ltmp;
-	if(!(btmp = BIO_new_fp(fp, BIO_NOCLOSE))) {
-		CONFerr(CONF_F_CONF_LOAD_FP,ERR_R_BUF_LIB);
-		return NULL;
-	}
-	ltmp = CONF_load_bio(conf, btmp, eline);
-	BIO_free(btmp);
-	return ltmp;
-	}
-#endif
-
-LHASH *CONF_load_bio(LHASH *conf, BIO *bp,long *eline)
-	{
-	CONF ctmp;
-	int ret;
-
-	CONF_set_nconf(&ctmp, conf);
-
-	ret = NCONF_load_bio(&ctmp, bp, eline);
-	if (ret)
-		return ctmp.data;
-	return NULL;
-	}
-
-STACK_OF(CONF_VALUE) *CONF_get_section(LHASH *conf,const char *section)
-	{
-	if (conf == NULL)
-		{
-		return NULL;
-		}
-	else
-		{
-		CONF ctmp;
-		CONF_set_nconf(&ctmp, conf);
-		return NCONF_get_section(&ctmp, section);
-		}
-	}
-
-char *CONF_get_string(LHASH *conf,const char *group,const char *name)
-	{
-	if (conf == NULL)
-		{
-		return NCONF_get_string(NULL, group, name);
-		}
-	else
-		{
-		CONF ctmp;
-		CONF_set_nconf(&ctmp, conf);
-		return NCONF_get_string(&ctmp, group, name);
-		}
-	}
-
-long CONF_get_number(LHASH *conf,const char *group,const char *name)
-	{
-	int status;
-	long result = 0;
-
-	if (conf == NULL)
-		{
-		status = NCONF_get_number_e(NULL, group, name, &result);
-		}
-	else
-		{
-		CONF ctmp;
-		CONF_set_nconf(&ctmp, conf);
-		status = NCONF_get_number_e(&ctmp, group, name, &result);
-		}
-
-	if (status == 0)
-		{
-		/* This function does not believe in errors... */
-		ERR_clear_error();
-		}
-	return result;
-	}
-
-void CONF_free(LHASH *conf)
-	{
-	CONF ctmp;
-	CONF_set_nconf(&ctmp, conf);
-	NCONF_free_data(&ctmp);
-	}
-
-#ifndef OPENSSL_NO_FP_API
-int CONF_dump_fp(LHASH *conf, FILE *out)
-	{
-	BIO *btmp;
-	int ret;
-
-	if(!(btmp = BIO_new_fp(out, BIO_NOCLOSE))) {
-		CONFerr(CONF_F_CONF_DUMP_FP,ERR_R_BUF_LIB);
-		return 0;
-	}
-	ret = CONF_dump_bio(conf, btmp);
-	BIO_free(btmp);
-	return ret;
-	}
-#endif
-
-int CONF_dump_bio(LHASH *conf, BIO *out)
-	{
-	CONF ctmp;
-	CONF_set_nconf(&ctmp, conf);
-	return NCONF_dump_bio(&ctmp, out);
-	}
-
-/* The following section contains the "New CONF" functions.  They are
-   completely centralised around a new CONF structure that may contain
-   basically anything, but at least a method pointer and a table of data.
-   These functions are also written in terms of the bridge functions used
-   by the "CONF classic" functions, for consistency.  */
-
-CONF *NCONF_new(CONF_METHOD *meth)
-	{
-	CONF *ret;
-
-	if (meth == NULL)
-		meth = NCONF_default();
-
-	ret = meth->create(meth);
-	if (ret == NULL)
-		{
-		CONFerr(CONF_F_NCONF_NEW,ERR_R_MALLOC_FAILURE);
-		return(NULL);
-		}
-
-	return ret;
-	}
-
-void NCONF_free(CONF *conf)
-	{
-	if (conf == NULL)
-		return;
-	conf->meth->destroy(conf);
-	}
-
-void NCONF_free_data(CONF *conf)
-	{
-	if (conf == NULL)
-		return;
-	conf->meth->destroy_data(conf);
-	}
-
-int NCONF_load(CONF *conf, const char *file, long *eline)
-	{
-	if (conf == NULL)
-		{
-		CONFerr(CONF_F_NCONF_LOAD,CONF_R_NO_CONF);
-		return 0;
-		}
-
-	return conf->meth->load(conf, file, eline);
-	}
-
-#ifndef OPENSSL_NO_FP_API
-int NCONF_load_fp(CONF *conf, FILE *fp,long *eline)
-	{
-	BIO *btmp;
-	int ret;
-	if(!(btmp = BIO_new_fp(fp, BIO_NOCLOSE)))
-		{
-		CONFerr(CONF_F_NCONF_LOAD_FP,ERR_R_BUF_LIB);
-		return 0;
-		}
-	ret = NCONF_load_bio(conf, btmp, eline);
-	BIO_free(btmp);
-	return ret;
-	}
-#endif
-
-int NCONF_load_bio(CONF *conf, BIO *bp,long *eline)
-	{
-	if (conf == NULL)
-		{
-		CONFerr(CONF_F_NCONF_LOAD_BIO,CONF_R_NO_CONF);
-		return 0;
-		}
-
-	return conf->meth->load_bio(conf, bp, eline);
-	}
-
-STACK_OF(CONF_VALUE) *NCONF_get_section(const CONF *conf,const char *section)
-	{
-	if (conf == NULL)
-		{
-		CONFerr(CONF_F_NCONF_GET_SECTION,CONF_R_NO_CONF);
-		return NULL;
-		}
-
-	if (section == NULL)
-		{
-		CONFerr(CONF_F_NCONF_GET_SECTION,CONF_R_NO_SECTION);
-		return NULL;
-		}
-
-	return _CONF_get_section_values(conf, section);
-	}
-
-char *NCONF_get_string(const CONF *conf,const char *group,const char *name)
-	{
-	char *s = _CONF_get_string(conf, group, name);
-
-        /* Since we may get a value from an environment variable even
-           if conf is NULL, let's check the value first */
-        if (s) return s;
-
-	if (conf == NULL)
-		{
-		CONFerr(CONF_F_NCONF_GET_STRING,
-                        CONF_R_NO_CONF_OR_ENVIRONMENT_VARIABLE);
-		return NULL;
-		}
-	CONFerr(CONF_F_NCONF_GET_STRING,
-		CONF_R_NO_VALUE);
-	ERR_add_error_data(4,"group=",group," name=",name);
-	return NULL;
-	}
-
-int NCONF_get_number_e(const CONF *conf,const char *group,const char *name,
-		       long *result)
-	{
-	char *str;
-
-	if (result == NULL)
-		{
-		CONFerr(CONF_F_NCONF_GET_NUMBER_E,ERR_R_PASSED_NULL_PARAMETER);
-		return 0;
-		}
-
-	str = NCONF_get_string(conf,group,name);
-
-	if (str == NULL)
-		return 0;
-
-	for (*result = 0;conf->meth->is_number(conf, *str);)
-		{
-		*result = (*result)*10 + conf->meth->to_int(conf, *str);
-		str++;
-		}
-
-	return 1;
-	}
-
-#ifndef OPENSSL_NO_FP_API
-int NCONF_dump_fp(const CONF *conf, FILE *out)
-	{
-	BIO *btmp;
-	int ret;
-	if(!(btmp = BIO_new_fp(out, BIO_NOCLOSE))) {
-		CONFerr(CONF_F_NCONF_DUMP_FP,ERR_R_BUF_LIB);
-		return 0;
-	}
-	ret = NCONF_dump_bio(conf, btmp);
-	BIO_free(btmp);
-	return ret;
-	}
-#endif
-
-int NCONF_dump_bio(const CONF *conf, BIO *out)
-	{
-	if (conf == NULL)
-		{
-		CONFerr(CONF_F_NCONF_DUMP_BIO,CONF_R_NO_CONF);
-		return 0;
-		}
-
-	return conf->meth->dump(conf, out);
-	}
-
-
-/* This function should be avoided */
-#if 0
-long NCONF_get_number(CONF *conf,char *group,char *name)
-	{
-	int status;
-	long ret=0;
-
-	status = NCONF_get_number_e(conf, group, name, &ret);
-	if (status == 0)
-		{
-		/* This function does not believe in errors... */
-		ERR_get_error();
-		}
-	return ret;
-	}
-#endif
diff --git a/crypto/openssl/crypto/conf/conf_mall.c b/crypto/openssl/crypto/conf/conf_mall.c
deleted file mode 100644
index 4ba40cf44cc6..000000000000
--- a/crypto/openssl/crypto/conf/conf_mall.c
+++ /dev/null
@@ -1,80 +0,0 @@
-/* conf_mall.c */
-/* Written by Stephen Henson (shenson@bigfoot.com) for the OpenSSL
- * project 2001.
- */
-/* ====================================================================
- * Copyright (c) 2001 The OpenSSL Project.  All rights reserved.
- *
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions
- * are met:
- *
- * 1. Redistributions of source code must retain the above copyright
- *    notice, this list of conditions and the following disclaimer. 
- *
- * 2. Redistributions in binary form must reproduce the above copyright
- *    notice, this list of conditions and the following disclaimer in
- *    the documentation and/or other materials provided with the
- *    distribution.
- *
- * 3. All advertising materials mentioning features or use of this
- *    software must display the following acknowledgment:
- *    "This product includes software developed by the OpenSSL Project
- *    for use in the OpenSSL Toolkit. (http://www.OpenSSL.org/)"
- *
- * 4. The names "OpenSSL Toolkit" and "OpenSSL Project" must not be used to
- *    endorse or promote products derived from this software without
- *    prior written permission. For written permission, please contact
- *    licensing@OpenSSL.org.
- *
- * 5. Products derived from this software may not be called "OpenSSL"
- *    nor may "OpenSSL" appear in their names without prior written
- *    permission of the OpenSSL Project.
- *
- * 6. Redistributions of any form whatsoever must retain the following
- *    acknowledgment:
- *    "This product includes software developed by the OpenSSL Project
- *    for use in the OpenSSL Toolkit (http://www.OpenSSL.org/)"
- *
- * THIS SOFTWARE IS PROVIDED BY THE OpenSSL PROJECT ``AS IS'' AND ANY
- * EXPRESSED OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
- * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR
- * PURPOSE ARE DISCLAIMED.  IN NO EVENT SHALL THE OpenSSL PROJECT OR
- * ITS CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
- * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
- * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
- * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
- * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
- * STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
- * ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED
- * OF THE POSSIBILITY OF SUCH DAMAGE.
- * ====================================================================
- *
- * This product includes cryptographic software written by Eric Young
- * (eay@cryptsoft.com).  This product includes software written by Tim
- * Hudson (tjh@cryptsoft.com).
- *
- */
-
-#include <stdio.h>
-#include <openssl/crypto.h>
-#include "cryptlib.h"
-#include <openssl/conf.h>
-#include <openssl/dso.h>
-#include <openssl/x509.h>
-#include <openssl/asn1.h>
-#ifndef OPENSSL_NO_ENGINE
-#include <openssl/engine.h>
-#endif
-
-/* Load all OpenSSL builtin modules */
-
-void OPENSSL_load_builtin_modules(void)
-	{
-	/* Add builtin modules here */
-	ASN1_add_oid_module();
-#ifndef OPENSSL_NO_ENGINE
-	ENGINE_add_conf_module();
-#endif
-	}
-
diff --git a/crypto/openssl/crypto/conf/conf_mod.c b/crypto/openssl/crypto/conf/conf_mod.c
deleted file mode 100644
index 587211a59c19..000000000000
--- a/crypto/openssl/crypto/conf/conf_mod.c
+++ /dev/null
@@ -1,616 +0,0 @@
-/* conf_mod.c */
-/* Written by Stephen Henson (shenson@bigfoot.com) for the OpenSSL
- * project 2001.
- */
-/* ====================================================================
- * Copyright (c) 2001 The OpenSSL Project.  All rights reserved.
- *
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions
- * are met:
- *
- * 1. Redistributions of source code must retain the above copyright
- *    notice, this list of conditions and the following disclaimer. 
- *
- * 2. Redistributions in binary form must reproduce the above copyright
- *    notice, this list of conditions and the following disclaimer in
- *    the documentation and/or other materials provided with the
- *    distribution.
- *
- * 3. All advertising materials mentioning features or use of this
- *    software must display the following acknowledgment:
- *    "This product includes software developed by the OpenSSL Project
- *    for use in the OpenSSL Toolkit. (http://www.OpenSSL.org/)"
- *
- * 4. The names "OpenSSL Toolkit" and "OpenSSL Project" must not be used to
- *    endorse or promote products derived from this software without
- *    prior written permission. For written permission, please contact
- *    licensing@OpenSSL.org.
- *
- * 5. Products derived from this software may not be called "OpenSSL"
- *    nor may "OpenSSL" appear in their names without prior written
- *    permission of the OpenSSL Project.
- *
- * 6. Redistributions of any form whatsoever must retain the following
- *    acknowledgment:
- *    "This product includes software developed by the OpenSSL Project
- *    for use in the OpenSSL Toolkit (http://www.OpenSSL.org/)"
- *
- * THIS SOFTWARE IS PROVIDED BY THE OpenSSL PROJECT ``AS IS'' AND ANY
- * EXPRESSED OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
- * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR
- * PURPOSE ARE DISCLAIMED.  IN NO EVENT SHALL THE OpenSSL PROJECT OR
- * ITS CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
- * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
- * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
- * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
- * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
- * STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
- * ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED
- * OF THE POSSIBILITY OF SUCH DAMAGE.
- * ====================================================================
- *
- * This product includes cryptographic software written by Eric Young
- * (eay@cryptsoft.com).  This product includes software written by Tim
- * Hudson (tjh@cryptsoft.com).
- *
- */
-
-#include <stdio.h>
-#include <ctype.h>
-#include <openssl/crypto.h>
-#include "cryptlib.h"
-#include <openssl/conf.h>
-#include <openssl/dso.h>
-#include <openssl/x509.h>
-
-
-#define DSO_mod_init_name "OPENSSL_init"
-#define DSO_mod_finish_name "OPENSSL_finish"
-
-
-/* This structure contains a data about supported modules.
- * entries in this table correspond to either dynamic or
- * static modules.
- */
-
-struct conf_module_st
-	{
-	/* DSO of this module or NULL if static */
-	DSO *dso;
-	/* Name of the module */
-	char *name;
-	/* Init function */
-	conf_init_func *init; 
-	/* Finish function */
-	conf_finish_func *finish;
-	/* Number of successfully initialized modules */
-	int links;
-	void *usr_data;
-	};
-
-
-/* This structure contains information about modules that have been
- * successfully initialized. There may be more than one entry for a
- * given module.
- */
-
-struct conf_imodule_st
-	{
-	CONF_MODULE *pmod;
-	char *name;
-	char *value;
-	unsigned long flags;
-	void *usr_data;
-	};
-
-static STACK_OF(CONF_MODULE) *supported_modules = NULL;
-static STACK_OF(CONF_IMODULE) *initialized_modules = NULL;
-
-static void module_free(CONF_MODULE *md);
-static void module_finish(CONF_IMODULE *imod);
-static int module_run(const CONF *cnf, char *name, char *value,
-					  unsigned long flags);
-static CONF_MODULE *module_add(DSO *dso, const char *name,
-			conf_init_func *ifunc, conf_finish_func *ffunc);
-static CONF_MODULE *module_find(char *name);
-static int module_init(CONF_MODULE *pmod, char *name, char *value,
-					   const CONF *cnf);
-static CONF_MODULE *module_load_dso(const CONF *cnf, char *name, char *value,
-									unsigned long flags);
-
-/* Main function: load modules from a CONF structure */
-
-int CONF_modules_load(const CONF *cnf, const char *appname,
-		      unsigned long flags)
-	{
-	STACK_OF(CONF_VALUE) *values;
-	CONF_VALUE *vl;
-	char *vsection;
-
-	int ret, i;
-
-	if (!cnf)
-		return 1;
-
-	if (appname == NULL)
-		appname = "openssl_conf";
-
-	vsection = NCONF_get_string(cnf, NULL, appname); 
-
-	if (!vsection)
-		{
-		ERR_clear_error();
-		return 1;
-		}
-
-	values = NCONF_get_section(cnf, vsection);
-
-	if (!values)
-		return 0;
-
-	for (i = 0; i < sk_CONF_VALUE_num(values); i++)
-		{
-		vl = sk_CONF_VALUE_value(values, i);
-		ret = module_run(cnf, vl->name, vl->value, flags);
-		if (ret <= 0)
-			if(!(flags & CONF_MFLAGS_IGNORE_ERRORS))
-				return ret;
-		}
-
-	return 1;
-
-	}
-
-int CONF_modules_load_file(const char *filename, const char *appname,
-			   unsigned long flags)
-	{
-	char *file = NULL;
-	CONF *conf = NULL;
-	int ret = 0;
-	conf = NCONF_new(NULL);
-	if (!conf)
-		goto err;
-
-	if (filename == NULL)
-		{
-		file = CONF_get1_default_config_file();
-		if (!file)
-			goto err;
-		}
-	else
-		file = (char *)filename;
-
-	if (NCONF_load(conf, file, NULL) <= 0)
-		{
-		if ((flags & CONF_MFLAGS_IGNORE_MISSING_FILE) &&
-		  (ERR_GET_REASON(ERR_peek_last_error()) == CONF_R_NO_SUCH_FILE))
-			{
-			ERR_clear_error();
-			ret = 1;
-			}
-		goto err;
-		}
-
-	ret = CONF_modules_load(conf, appname, flags);
-
-	err:
-	if (filename == NULL)
-		OPENSSL_free(file);
-	NCONF_free(conf);
-
-	return ret;
-	}
-
-static int module_run(const CONF *cnf, char *name, char *value,
-		      unsigned long flags)
-	{
-	CONF_MODULE *md;
-	int ret;
-
-	md = module_find(name);
-
-	/* Module not found: try to load DSO */
-	if (!md && !(flags & CONF_MFLAGS_NO_DSO))
-		md = module_load_dso(cnf, name, value, flags);
-
-	if (!md)
-		{
-		if (!(flags & CONF_MFLAGS_SILENT))
-			{
-			CONFerr(CONF_F_MODULE_RUN, CONF_R_UNKNOWN_MODULE_NAME);
-			ERR_add_error_data(2, "module=", name);
-			}
-		return -1;
-		}
-
-	ret = module_init(md, name, value, cnf);
-
-	if (ret <= 0)
-		{
-		if (!(flags & CONF_MFLAGS_SILENT))
-			{
-			char rcode[DECIMAL_SIZE(ret)+1];
-			CONFerr(CONF_F_MODULE_RUN, CONF_R_MODULE_INITIALIZATION_ERROR);
-			BIO_snprintf(rcode, sizeof rcode, "%-8d", ret);
-			ERR_add_error_data(6, "module=", name, ", value=", value, ", retcode=", rcode);
-			}
-		}
-
-	return ret;
-	}
-
-/* Load a module from a DSO */
-static CONF_MODULE *module_load_dso(const CONF *cnf, char *name, char *value,
-				    unsigned long flags)
-	{
-	DSO *dso = NULL;
-	conf_init_func *ifunc;
-	conf_finish_func *ffunc;
-	char *path = NULL;
-	int errcode = 0;
-	CONF_MODULE *md;
-	/* Look for alternative path in module section */
-	path = NCONF_get_string(cnf, value, "path");
-	if (!path)
-		{
-		ERR_clear_error();
-		path = name;
-		}
-	dso = DSO_load(NULL, path, NULL, 0);
-	if (!dso)
-		{
-		errcode = CONF_R_ERROR_LOADING_DSO;
-		goto err;
-		}
-        ifunc = (conf_init_func *)DSO_bind_func(dso, DSO_mod_init_name);
-	if (!ifunc)
-		{
-		errcode = CONF_R_MISSING_INIT_FUNCTION;
-		goto err;
-		}
-        ffunc = (conf_finish_func *)DSO_bind_func(dso, DSO_mod_finish_name);
-	/* All OK, add module */
-	md = module_add(dso, name, ifunc, ffunc);
-
-	if (!md)
-		goto err;
-
-	return md;
-
-	err:
-	if (dso)
-		DSO_free(dso);
-	CONFerr(CONF_F_MODULE_LOAD_DSO, errcode);
-	ERR_add_error_data(4, "module=", name, ", path=", path);
-	return NULL;
-	}
-
-/* add module to list */
-static CONF_MODULE *module_add(DSO *dso, const char *name,
-			       conf_init_func *ifunc, conf_finish_func *ffunc)
-	{
-	CONF_MODULE *tmod = NULL;
-	if (supported_modules == NULL)
-		supported_modules = sk_CONF_MODULE_new_null();
-	if (supported_modules == NULL)
-		return NULL;
-	tmod = OPENSSL_malloc(sizeof(CONF_MODULE));
-	if (tmod == NULL)
-		return NULL;
-
-	tmod->dso = dso;
-	tmod->name = BUF_strdup(name);
-	tmod->init = ifunc;
-	tmod->finish = ffunc;
-	tmod->links = 0;
-
-	if (!sk_CONF_MODULE_push(supported_modules, tmod))
-		{
-		OPENSSL_free(tmod);
-		return NULL;
-		}
-
-	return tmod;
-	}
-
-/* Find a module from the list. We allow module names of the
- * form modname.XXXX to just search for modname to allow the
- * same module to be initialized more than once.
- */
-
-static CONF_MODULE *module_find(char *name)
-	{
-	CONF_MODULE *tmod;
-	int i, nchar;
-	char *p;
-	p = strrchr(name, '.');
-
-	if (p)
-		nchar = p - name;
-	else 
-		nchar = strlen(name);
-
-	for (i = 0; i < sk_CONF_MODULE_num(supported_modules); i++)
-		{
-		tmod = sk_CONF_MODULE_value(supported_modules, i);
-		if (!strncmp(tmod->name, name, nchar))
-			return tmod;
-		}
-
-	return NULL;
-
-	}
-
-/* initialize a module */
-static int module_init(CONF_MODULE *pmod, char *name, char *value,
-		       const CONF *cnf)
-	{
-	int ret = 1;
-	int init_called = 0;
-	CONF_IMODULE *imod = NULL;
-
-	/* Otherwise add initialized module to list */
-	imod = OPENSSL_malloc(sizeof(CONF_IMODULE));
-	if (!imod)
-		goto err;
-
-	imod->pmod = pmod;
-	imod->name = BUF_strdup(name);
-	imod->value = BUF_strdup(value);
-	imod->usr_data = NULL;
-
-	if (!imod->name || !imod->value)
-		goto memerr;
-
-	/* Try to initialize module */
-	if(pmod->init)
-		{
-		ret = pmod->init(imod, cnf);
-		init_called = 1;
-		/* Error occurred, exit */
-		if (ret <= 0)
-			goto err;
-		}
-
-	if (initialized_modules == NULL)
-		{
-		initialized_modules = sk_CONF_IMODULE_new_null();
-		if (!initialized_modules)
-			{
-			CONFerr(CONF_F_MODULE_INIT, ERR_R_MALLOC_FAILURE);
-			goto err;
-			}
-		}
-
-	if (!sk_CONF_IMODULE_push(initialized_modules, imod))
-		{
-		CONFerr(CONF_F_MODULE_INIT, ERR_R_MALLOC_FAILURE);
-		goto err;
-		}
-
-	pmod->links++;
-
-	return ret;
-
-	err:
-
-	/* We've started the module so we'd better finish it */
-	if (pmod->finish && init_called)
-		pmod->finish(imod);
-
-	memerr:
-	if (imod)
-		{
-		if (imod->name)
-			OPENSSL_free(imod->name);
-		if (imod->value)
-			OPENSSL_free(imod->value);
-		OPENSSL_free(imod);
-		}
-
-	return -1;
-
-	}
-
-/* Unload any dynamic modules that have a link count of zero:
- * i.e. have no active initialized modules. If 'all' is set
- * then all modules are unloaded including static ones.
- */
-
-void CONF_modules_unload(int all)
-	{
-	int i;
-	CONF_MODULE *md;
-	CONF_modules_finish();
-	/* unload modules in reverse order */
-	for (i = sk_CONF_MODULE_num(supported_modules) - 1; i >= 0; i--)
-		{
-		md = sk_CONF_MODULE_value(supported_modules, i);
-		/* If static or in use and 'all' not set ignore it */
-		if (((md->links > 0) || !md->dso) && !all)
-			continue;
-		/* Since we're working in reverse this is OK */
-		sk_CONF_MODULE_delete(supported_modules, i);
-		module_free(md);
-		}
-	if (sk_CONF_MODULE_num(supported_modules) == 0)
-		{
-		sk_CONF_MODULE_free(supported_modules);
-		supported_modules = NULL;
-		}
-	}
-
-/* unload a single module */
-static void module_free(CONF_MODULE *md)
-	{
-	if (md->dso)
-		DSO_free(md->dso);
-	OPENSSL_free(md->name);
-	OPENSSL_free(md);
-	}
-
-/* finish and free up all modules instances */
-
-void CONF_modules_finish(void)
-	{
-	CONF_IMODULE *imod;
-	while (sk_CONF_IMODULE_num(initialized_modules) > 0)
-		{
-		imod = sk_CONF_IMODULE_pop(initialized_modules);
-		module_finish(imod);
-		}
-	sk_CONF_IMODULE_free(initialized_modules);
-	initialized_modules = NULL;
-	}
-
-/* finish a module instance */
-
-static void module_finish(CONF_IMODULE *imod)
-	{
-	if (imod->pmod->finish)
-		imod->pmod->finish(imod);
-	imod->pmod->links--;
-	OPENSSL_free(imod->name);
-	OPENSSL_free(imod->value);
-	OPENSSL_free(imod);
-	}
-
-/* Add a static module to OpenSSL */
-
-int CONF_module_add(const char *name, conf_init_func *ifunc, 
-		    conf_finish_func *ffunc)
-	{
-	if (module_add(NULL, name, ifunc, ffunc))
-		return 1;
-	else
-		return 0;
-	}
-
-void CONF_modules_free(void)
-	{
-	CONF_modules_finish();
-	CONF_modules_unload(1);
-	}
-
-/* Utility functions */
-
-const char *CONF_imodule_get_name(const CONF_IMODULE *md)
-	{
-	return md->name;
-	}
-
-const char *CONF_imodule_get_value(const CONF_IMODULE *md)
-	{
-	return md->value;
-	}
-
-void *CONF_imodule_get_usr_data(const CONF_IMODULE *md)
-	{
-	return md->usr_data;
-	}
-
-void CONF_imodule_set_usr_data(CONF_IMODULE *md, void *usr_data)
-	{
-	md->usr_data = usr_data;
-	}
-
-CONF_MODULE *CONF_imodule_get_module(const CONF_IMODULE *md)
-	{
-	return md->pmod;
-	}
-
-unsigned long CONF_imodule_get_flags(const CONF_IMODULE *md)
-	{
-	return md->flags;
-	}
-
-void CONF_imodule_set_flags(CONF_IMODULE *md, unsigned long flags)
-	{
-	md->flags = flags;
-	}
-
-void *CONF_module_get_usr_data(CONF_MODULE *pmod)
-	{
-	return pmod->usr_data;
-	}
-
-void CONF_module_set_usr_data(CONF_MODULE *pmod, void *usr_data)
-	{
-	pmod->usr_data = usr_data;
-	}
-
-/* Return default config file name */
-
-char *CONF_get1_default_config_file(void)
-	{
-	char *file;
-	int len;
-
-	file = getenv("OPENSSL_CONF");
-	if (file) 
-		return BUF_strdup(file);
-
-	len = strlen(X509_get_default_cert_area());
-#ifndef OPENSSL_SYS_VMS
-	len++;
-#endif
-	len += strlen(OPENSSL_CONF);
-
-	file = OPENSSL_malloc(len + 1);
-
-	if (!file)
-		return NULL;
-	BUF_strlcpy(file,X509_get_default_cert_area(),len + 1);
-#ifndef OPENSSL_SYS_VMS
-	BUF_strlcat(file,"/",len + 1);
-#endif
-	BUF_strlcat(file,OPENSSL_CONF,len + 1);
-
-	return file;
-	}
-
-/* This function takes a list separated by 'sep' and calls the
- * callback function giving the start and length of each member
- * optionally stripping leading and trailing whitespace. This can
- * be used to parse comma separated lists for example.
- */
-
-int CONF_parse_list(const char *list_, int sep, int nospc,
-	int (*list_cb)(const char *elem, int len, void *usr), void *arg)
-	{
-	int ret;
-	const char *lstart, *tmpend, *p;
-	lstart = list_;
-
-	for(;;)
-		{
-		if (nospc)
-			{
-			while(*lstart && isspace((unsigned char)*lstart))
-				lstart++;
-			}
-		p = strchr(lstart, sep);
-		if (p == lstart || !*lstart)
-			ret = list_cb(NULL, 0, arg);
-		else
-			{
-			if (p)
-				tmpend = p - 1;
-			else 
-				tmpend = lstart + strlen(lstart) - 1;
-			if (nospc)
-				{
-				while(isspace((unsigned char)*tmpend))
-					tmpend--;
-				}
-			ret = list_cb(lstart, tmpend - lstart + 1, arg);
-			}
-		if (ret <= 0)
-			return ret;
-		if (p == NULL)
-			return 1;
-		lstart = p + 1;
-		}
-	}
-
diff --git a/crypto/openssl/crypto/conf/conf_sap.c b/crypto/openssl/crypto/conf/conf_sap.c
deleted file mode 100644
index e15c2e55463a..000000000000
--- a/crypto/openssl/crypto/conf/conf_sap.c
+++ /dev/null
@@ -1,111 +0,0 @@
-/* conf_sap.c */
-/* Written by Stephen Henson (shenson@bigfoot.com) for the OpenSSL
- * project 2001.
- */
-/* ====================================================================
- * Copyright (c) 2001 The OpenSSL Project.  All rights reserved.
- *
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions
- * are met:
- *
- * 1. Redistributions of source code must retain the above copyright
- *    notice, this list of conditions and the following disclaimer. 
- *
- * 2. Redistributions in binary form must reproduce the above copyright
- *    notice, this list of conditions and the following disclaimer in
- *    the documentation and/or other materials provided with the
- *    distribution.
- *
- * 3. All advertising materials mentioning features or use of this
- *    software must display the following acknowledgment:
- *    "This product includes software developed by the OpenSSL Project
- *    for use in the OpenSSL Toolkit. (http://www.OpenSSL.org/)"
- *
- * 4. The names "OpenSSL Toolkit" and "OpenSSL Project" must not be used to
- *    endorse or promote products derived from this software without
- *    prior written permission. For written permission, please contact
- *    licensing@OpenSSL.org.
- *
- * 5. Products derived from this software may not be called "OpenSSL"
- *    nor may "OpenSSL" appear in their names without prior written
- *    permission of the OpenSSL Project.
- *
- * 6. Redistributions of any form whatsoever must retain the following
- *    acknowledgment:
- *    "This product includes software developed by the OpenSSL Project
- *    for use in the OpenSSL Toolkit (http://www.OpenSSL.org/)"
- *
- * THIS SOFTWARE IS PROVIDED BY THE OpenSSL PROJECT ``AS IS'' AND ANY
- * EXPRESSED OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
- * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR
- * PURPOSE ARE DISCLAIMED.  IN NO EVENT SHALL THE OpenSSL PROJECT OR
- * ITS CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
- * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
- * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
- * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
- * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
- * STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
- * ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED
- * OF THE POSSIBILITY OF SUCH DAMAGE.
- * ====================================================================
- *
- * This product includes cryptographic software written by Eric Young
- * (eay@cryptsoft.com).  This product includes software written by Tim
- * Hudson (tjh@cryptsoft.com).
- *
- */
-
-#include <stdio.h>
-#include <openssl/crypto.h>
-#include "cryptlib.h"
-#include <openssl/conf.h>
-#include <openssl/dso.h>
-#include <openssl/x509.h>
-#include <openssl/asn1.h>
-#ifndef OPENSSL_NO_ENGINE
-#include <openssl/engine.h>
-#endif
-
-/* This is the automatic configuration loader: it is called automatically by
- * OpenSSL when any of a number of standard initialisation functions are called,
- * unless this is overridden by calling OPENSSL_no_config()
- */
-
-static int openssl_configured = 0;
-
-void OPENSSL_config(const char *config_name)
-	{
-	if (openssl_configured)
-		return;
-
-	OPENSSL_load_builtin_modules();
-#ifndef OPENSSL_NO_ENGINE
-	/* Need to load ENGINEs */
-	ENGINE_load_builtin_engines();
-#endif
-	/* Add others here? */
-
-
-	ERR_clear_error();
-	if (CONF_modules_load_file(NULL, NULL,
-					CONF_MFLAGS_IGNORE_MISSING_FILE) <= 0)
-		{
-		BIO *bio_err;
-		ERR_load_crypto_strings();
-		if ((bio_err=BIO_new_fp(stderr, BIO_NOCLOSE)) != NULL)
-			{
-			BIO_printf(bio_err,"Auto configuration failed\n");
-			ERR_print_errors(bio_err);
-			BIO_free(bio_err);
-			}
-		exit(1);
-		}
-
-	return;
-	}
-
-void OPENSSL_no_config()
-	{
-	openssl_configured = 1;
-	}
diff --git a/crypto/openssl/crypto/conf/keysets.pl b/crypto/openssl/crypto/conf/keysets.pl
deleted file mode 100644
index 50ed67fa527c..000000000000
--- a/crypto/openssl/crypto/conf/keysets.pl
+++ /dev/null
@@ -1,185 +0,0 @@
-#!/usr/local/bin/perl
-
-$NUMBER=0x01;
-$UPPER=0x02;
-$LOWER=0x04;
-$UNDER=0x100;
-$PUNCTUATION=0x200;
-$WS=0x10;
-$ESC=0x20;
-$QUOTE=0x40;
-$DQUOTE=0x400;
-$COMMENT=0x80;
-$FCOMMENT=0x800;
-$EOF=0x08;
-$HIGHBIT=0x1000;
-
-foreach (0 .. 255)
-	{
-	$v=0;
-	$c=sprintf("%c",$_);
-	$v|=$NUMBER	if ($c =~ /[0-9]/);
-	$v|=$UPPER	if ($c =~ /[A-Z]/);
-	$v|=$LOWER	if ($c =~ /[a-z]/);
-	$v|=$UNDER	if ($c =~ /_/);
-	$v|=$PUNCTUATION if ($c =~ /[!\.%&\*\+,\/;\?\@\^\~\|-]/);
-	$v|=$WS		if ($c =~ /[ \t\r\n]/);
-	$v|=$ESC	if ($c =~ /\\/);
-	$v|=$QUOTE	if ($c =~ /['`"]/); # for emacs: "`'}/)
-	$v|=$COMMENT	if ($c =~ /\#/);
-	$v|=$EOF	if ($c =~ /\0/);
-	$v|=$HIGHBIT	if ($c =~/[\x80-\xff]/);
-
-	push(@V_def,$v);
-	}
-
-foreach (0 .. 255)
-	{
-	$v=0;
-	$c=sprintf("%c",$_);
-	$v|=$NUMBER	if ($c =~ /[0-9]/);
-	$v|=$UPPER	if ($c =~ /[A-Z]/);
-	$v|=$LOWER	if ($c =~ /[a-z]/);
-	$v|=$UNDER	if ($c =~ /_/);
-	$v|=$PUNCTUATION if ($c =~ /[!\.%&\*\+,\/;\?\@\^\~\|-]/);
-	$v|=$WS		if ($c =~ /[ \t\r\n]/);
-	$v|=$DQUOTE	if ($c =~ /["]/); # for emacs: "}/)
-	$v|=$FCOMMENT	if ($c =~ /;/);
-	$v|=$EOF	if ($c =~ /\0/);
-	$v|=$HIGHBIT	if ($c =~/[\x80-\xff]/);
-
-	push(@V_w32,$v);
-	}
-
-print <<"EOF";
-/* crypto/conf/conf_def.h */
-/* Copyright (C) 1995-1998 Eric Young (eay\@cryptsoft.com)
- * All rights reserved.
- *
- * This package is an SSL implementation written
- * by Eric Young (eay\@cryptsoft.com).
- * The implementation was written so as to conform with Netscapes SSL.
- * 
- * This library is free for commercial and non-commercial use as long as
- * the following conditions are aheared to.  The following conditions
- * apply to all code found in this distribution, be it the RC4, RSA,
- * lhash, DES, etc., code; not just the SSL code.  The SSL documentation
- * included with this distribution is covered by the same copyright terms
- * except that the holder is Tim Hudson (tjh\@cryptsoft.com).
- * 
- * Copyright remains Eric Young's, and as such any Copyright notices in
- * the code are not to be removed.
- * If this package is used in a product, Eric Young should be given attribution
- * as the author of the parts of the library used.
- * This can be in the form of a textual message at program startup or
- * in documentation (online or textual) provided with the package.
- * 
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions
- * are met:
- * 1. Redistributions of source code must retain the copyright
- *    notice, this list of conditions and the following disclaimer.
- * 2. Redistributions in binary form must reproduce the above copyright
- *    notice, this list of conditions and the following disclaimer in the
- *    documentation and/or other materials provided with the distribution.
- * 3. All advertising materials mentioning features or use of this software
- *    must display the following acknowledgement:
- *    "This product includes cryptographic software written by
- *     Eric Young (eay\@cryptsoft.com)"
- *    The word 'cryptographic' can be left out if the rouines from the library
- *    being used are not cryptographic related :-).
- * 4. If you include any Windows specific code (or a derivative thereof) from 
- *    the apps directory (application code) you must include an acknowledgement:
- *    "This product includes software written by Tim Hudson (tjh\@cryptsoft.com)"
- * 
- * THIS SOFTWARE IS PROVIDED BY ERIC YOUNG ``AS IS'' AND
- * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
- * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
- * ARE DISCLAIMED.  IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE
- * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
- * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
- * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
- * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
- * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
- * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
- * SUCH DAMAGE.
- * 
- * The licence and distribution terms for any publically available version or
- * derivative of this code cannot be changed.  i.e. this code cannot simply be
- * copied and put under another distribution licence
- * [including the GNU Public Licence.]
- */
-
-/* THIS FILE WAS AUTOMAGICALLY GENERATED!
-   Please modify and use keysets.pl to regenerate it. */
-
-#define CONF_NUMBER		$NUMBER
-#define CONF_UPPER		$UPPER
-#define CONF_LOWER		$LOWER
-#define CONF_UNDER		$UNDER
-#define CONF_PUNCTUATION	$PUNCTUATION
-#define CONF_WS			$WS
-#define CONF_ESC		$ESC
-#define CONF_QUOTE		$QUOTE
-#define CONF_DQUOTE		$DQUOTE
-#define CONF_COMMENT		$COMMENT
-#define CONF_FCOMMENT		$FCOMMENT
-#define CONF_EOF		$EOF
-#define CONF_HIGHBIT		$HIGHBIT
-#define CONF_ALPHA		(CONF_UPPER|CONF_LOWER)
-#define CONF_ALPHA_NUMERIC	(CONF_ALPHA|CONF_NUMBER|CONF_UNDER)
-#define CONF_ALPHA_NUMERIC_PUNCT (CONF_ALPHA|CONF_NUMBER|CONF_UNDER| \\
-					CONF_PUNCTUATION)
-
-#define KEYTYPES(c)		((unsigned short *)((c)->meth_data))
-#ifndef CHARSET_EBCDIC
-#define IS_COMMENT(c,a)		(KEYTYPES(c)[(a)&0xff]&CONF_COMMENT)
-#define IS_FCOMMENT(c,a)	(KEYTYPES(c)[(a)&0xff]&CONF_FCOMMENT)
-#define IS_EOF(c,a)		(KEYTYPES(c)[(a)&0xff]&CONF_EOF)
-#define IS_ESC(c,a)		(KEYTYPES(c)[(a)&0xff]&CONF_ESC)
-#define IS_NUMBER(c,a)		(KEYTYPES(c)[(a)&0xff]&CONF_NUMBER)
-#define IS_WS(c,a)		(KEYTYPES(c)[(a)&0xff]&CONF_WS)
-#define IS_ALPHA_NUMERIC(c,a)	(KEYTYPES(c)[(a)&0xff]&CONF_ALPHA_NUMERIC)
-#define IS_ALPHA_NUMERIC_PUNCT(c,a) \\
-				(KEYTYPES(c)[(a)&0xff]&CONF_ALPHA_NUMERIC_PUNCT)
-#define IS_QUOTE(c,a)		(KEYTYPES(c)[(a)&0xff]&CONF_QUOTE)
-#define IS_DQUOTE(c,a)		(KEYTYPES(c)[(a)&0xff]&CONF_DQUOTE)
-#define IS_HIGHBIT(c,a)		(KEYTYPES(c)[(a)&0xff]&CONF_HIGHBIT)
-
-#else /*CHARSET_EBCDIC*/
-
-#define IS_COMMENT(c,a)		(KEYTYPES(c)[os_toascii[a]&0xff]&CONF_COMMENT)
-#define IS_FCOMMENT(c,a)	(KEYTYPES(c)[os_toascii[a]&0xff]&CONF_FCOMMENT)
-#define IS_EOF(c,a)		(KEYTYPES(c)[os_toascii[a]&0xff]&CONF_EOF)
-#define IS_ESC(c,a)		(KEYTYPES(c)[os_toascii[a]&0xff]&CONF_ESC)
-#define IS_NUMBER(c,a)		(KEYTYPES(c)[os_toascii[a]&0xff]&CONF_NUMBER)
-#define IS_WS(c,a)		(KEYTYPES(c)[os_toascii[a]&0xff]&CONF_WS)
-#define IS_ALPHA_NUMERIC(c,a)	(KEYTYPES(c)[os_toascii[a]&0xff]&CONF_ALPHA_NUMERIC)
-#define IS_ALPHA_NUMERIC_PUNCT(c,a) \\
-				(KEYTYPES(c)[os_toascii[a]&0xff]&CONF_ALPHA_NUMERIC_PUNCT)
-#define IS_QUOTE(c,a)		(KEYTYPES(c)[os_toascii[a]&0xff]&CONF_QUOTE)
-#define IS_DQUOTE(c,a)		(KEYTYPES(c)[os_toascii[a]&0xff]&CONF_DQUOTE)
-#define IS_HIGHBIT(c,a)		(KEYTYPES(c)[os_toascii[a]&0xff]&CONF_HIGHBIT)
-#endif /*CHARSET_EBCDIC*/
-
-EOF
-
-print "static unsigned short CONF_type_default[256]={";
-
-for ($i=0; $i<256; $i++)
-	{
-	print "\n\t" if ($i % 8) == 0;
-	printf "0x%04X,",$V_def[$i];
-	}
-
-print "\n\t};\n\n";
-
-print "static unsigned short CONF_type_win32[256]={";
-
-for ($i=0; $i<256; $i++)
-	{
-	print "\n\t" if ($i % 8) == 0;
-	printf "0x%04X,",$V_w32[$i];
-	}
-
-print "\n\t};\n\n";
diff --git a/crypto/openssl/crypto/conf/ssleay.cnf b/crypto/openssl/crypto/conf/ssleay.cnf
deleted file mode 100644
index ed33af601e1e..000000000000
--- a/crypto/openssl/crypto/conf/ssleay.cnf
+++ /dev/null
@@ -1,78 +0,0 @@
-#
-# This is a test configuration file for use in SSLeay etc...
-#
-
-init = 5
-in\#it1 =10
-init2='10'
-init3='10\''
-init4="10'"
-init5='='10\'' again'
-
-SSLeay::version = 0.5.0
-
-[genrsa]
-default_bits	= 512
-SSLEAY::version = 0.5.0
-
-[gendh]
-default_bits	= 512
-def_generator	= 2
-
-[s_client]
-cipher1		= DES_CBC_MD5:DES_CBC_SHA:DES_EDE_SHA:RC4_MD5\
-cipher2		= 'DES_CBC_MD5 DES_CBC_SHA DES_EDE_SHA RC4_MD5'
-cipher3		= "DES_CBC_MD5 DES_CBC_SHA DES_EDE_SHA RC4_MD5"
-cipher4		= DES_CBC_MD5 DES_CBC_SHA DES_EDE_SHA RC4_MD5
-
-[ default ]
-cert_dir	= $ENV::HOME/.ca_certs
-
-HOME		= /tmp/eay
-
-tmp_cert_dir	= $HOME/.ca_certs
-tmp2_cert_dir	= thisis$(HOME)stuff
-
-LOGNAME	= Eric Young (home=$HOME)
-
-[ special ]
-
-H=$HOME
-H=$default::HOME
-H=$ENV::HOME
-#
-# SSLeay example configuration file.
-# This is mostly being used for generation of certificate requests.
-#
-
-RANDFILE		= $HOME/.rand
-
-[ req ]
-default_bits		= 512
-default_keyfile 	= privkey.pem
-
-Attribute_type_1	= countryName
-Attribute_text_1	= Country Name (2 letter code)
-Attribute_default_1	= AU
-
-Attribute_type_2	= stateOrProvinceName
-Attribute_text_2	= State or Province Name (full name)
-Attribute_default_2	= Queensland
-
-Attribute_type_3	= localityName
-Attribute_text_3	= Locality Name (eg, city)
-
-Attribute_type_4	= organizationName
-Attribute_text_4	= Organization Name (eg, company)
-Attribute_default_4	= Mincom Pty Ltd
-
-Attribute_type_5	= organizationalUnitName
-Attribute_text_5	= Organizational Unit Name (eg, section)
-Attribute_default_5	= TR
-
-Attribute_type_6	= commonName
-Attribute_text_6	= Common Name (eg, YOUR name)
-
-Attribute_type_7	= emailAddress
-Attribute_text_7	= Email Address
-
diff --git a/crypto/openssl/crypto/conf/test.c b/crypto/openssl/crypto/conf/test.c
deleted file mode 100644
index 7fab85053e4c..000000000000
--- a/crypto/openssl/crypto/conf/test.c
+++ /dev/null
@@ -1,98 +0,0 @@
-/* crypto/conf/test.c */
-/* Copyright (C) 1995-1998 Eric Young (eay@cryptsoft.com)
- * All rights reserved.
- *
- * This package is an SSL implementation written
- * by Eric Young (eay@cryptsoft.com).
- * The implementation was written so as to conform with Netscapes SSL.
- * 
- * This library is free for commercial and non-commercial use as long as
- * the following conditions are aheared to.  The following conditions
- * apply to all code found in this distribution, be it the RC4, RSA,
- * lhash, DES, etc., code; not just the SSL code.  The SSL documentation
- * included with this distribution is covered by the same copyright terms
- * except that the holder is Tim Hudson (tjh@cryptsoft.com).
- * 
- * Copyright remains Eric Young's, and as such any Copyright notices in
- * the code are not to be removed.
- * If this package is used in a product, Eric Young should be given attribution
- * as the author of the parts of the library used.
- * This can be in the form of a textual message at program startup or
- * in documentation (online or textual) provided with the package.
- * 
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions
- * are met:
- * 1. Redistributions of source code must retain the copyright
- *    notice, this list of conditions and the following disclaimer.
- * 2. Redistributions in binary form must reproduce the above copyright
- *    notice, this list of conditions and the following disclaimer in the
- *    documentation and/or other materials provided with the distribution.
- * 3. All advertising materials mentioning features or use of this software
- *    must display the following acknowledgement:
- *    "This product includes cryptographic software written by
- *     Eric Young (eay@cryptsoft.com)"
- *    The word 'cryptographic' can be left out if the rouines from the library
- *    being used are not cryptographic related :-).
- * 4. If you include any Windows specific code (or a derivative thereof) from 
- *    the apps directory (application code) you must include an acknowledgement:
- *    "This product includes software written by Tim Hudson (tjh@cryptsoft.com)"
- * 
- * THIS SOFTWARE IS PROVIDED BY ERIC YOUNG ``AS IS'' AND
- * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
- * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
- * ARE DISCLAIMED.  IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE
- * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
- * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
- * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
- * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
- * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
- * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
- * SUCH DAMAGE.
- * 
- * The licence and distribution terms for any publically available version or
- * derivative of this code cannot be changed.  i.e. this code cannot simply be
- * copied and put under another distribution licence
- * [including the GNU Public Licence.]
- */
-
-#include <stdio.h>
-#include <stdlib.h>
-#include <openssl/conf.h>
-#include <openssl/err.h>
-
-main()
-	{
-	LHASH *conf;
-	long eline;
-	char *s,*s2;
-
-#ifdef USE_WIN32
-	CONF_set_default_method(CONF_WIN32);
-#endif
-	conf=CONF_load(NULL,"ssleay.cnf",&eline);
-	if (conf == NULL)
-		{
-		ERR_load_crypto_strings();
-		printf("unable to load configuration, line %ld\n",eline);
-		ERR_print_errors_fp(stderr);
-		exit(1);
-		}
-	lh_stats(conf,stdout);
-	lh_node_stats(conf,stdout);
-	lh_node_usage_stats(conf,stdout);
-
-	s=CONF_get_string(conf,NULL,"init2");
-	printf("init2=%s\n",(s == NULL)?"NULL":s);
-
-	s=CONF_get_string(conf,NULL,"cipher1");
-	printf("cipher1=%s\n",(s == NULL)?"NULL":s);
-
-	s=CONF_get_string(conf,"s_client","cipher1");
-	printf("s_client:cipher1=%s\n",(s == NULL)?"NULL":s);
-
-	printf("---------------------------- DUMP ------------------------\n");
-	CONF_dump_fp(conf, stdout);
-
-	exit(0);
-	}
diff --git a/crypto/openssl/crypto/cpt_err.c b/crypto/openssl/crypto/cpt_err.c
deleted file mode 100644
index 9fd41fff8cbd..000000000000
--- a/crypto/openssl/crypto/cpt_err.c
+++ /dev/null
@@ -1,103 +0,0 @@
-/* crypto/cpt_err.c */
-/* ====================================================================
- * Copyright (c) 1999-2005 The OpenSSL Project.  All rights reserved.
- *
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions
- * are met:
- *
- * 1. Redistributions of source code must retain the above copyright
- *    notice, this list of conditions and the following disclaimer. 
- *
- * 2. Redistributions in binary form must reproduce the above copyright
- *    notice, this list of conditions and the following disclaimer in
- *    the documentation and/or other materials provided with the
- *    distribution.
- *
- * 3. All advertising materials mentioning features or use of this
- *    software must display the following acknowledgment:
- *    "This product includes software developed by the OpenSSL Project
- *    for use in the OpenSSL Toolkit. (http://www.OpenSSL.org/)"
- *
- * 4. The names "OpenSSL Toolkit" and "OpenSSL Project" must not be used to
- *    endorse or promote products derived from this software without
- *    prior written permission. For written permission, please contact
- *    openssl-core@OpenSSL.org.
- *
- * 5. Products derived from this software may not be called "OpenSSL"
- *    nor may "OpenSSL" appear in their names without prior written
- *    permission of the OpenSSL Project.
- *
- * 6. Redistributions of any form whatsoever must retain the following
- *    acknowledgment:
- *    "This product includes software developed by the OpenSSL Project
- *    for use in the OpenSSL Toolkit (http://www.OpenSSL.org/)"
- *
- * THIS SOFTWARE IS PROVIDED BY THE OpenSSL PROJECT ``AS IS'' AND ANY
- * EXPRESSED OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
- * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR
- * PURPOSE ARE DISCLAIMED.  IN NO EVENT SHALL THE OpenSSL PROJECT OR
- * ITS CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
- * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
- * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
- * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
- * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
- * STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
- * ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED
- * OF THE POSSIBILITY OF SUCH DAMAGE.
- * ====================================================================
- *
- * This product includes cryptographic software written by Eric Young
- * (eay@cryptsoft.com).  This product includes software written by Tim
- * Hudson (tjh@cryptsoft.com).
- *
- */
-
-/* NOTE: this file was auto generated by the mkerr.pl script: any changes
- * made to it will be overwritten when the script next updates this file,
- * only reason strings will be preserved.
- */
-
-#include <stdio.h>
-#include <openssl/err.h>
-#include <openssl/crypto.h>
-
-/* BEGIN ERROR CODES */
-#ifndef OPENSSL_NO_ERR
-
-#define ERR_FUNC(func) ERR_PACK(ERR_LIB_CRYPTO,func,0)
-#define ERR_REASON(reason) ERR_PACK(ERR_LIB_CRYPTO,0,reason)
-
-static ERR_STRING_DATA CRYPTO_str_functs[]=
-	{
-{ERR_FUNC(CRYPTO_F_CRYPTO_GET_EX_NEW_INDEX),	"CRYPTO_get_ex_new_index"},
-{ERR_FUNC(CRYPTO_F_CRYPTO_GET_NEW_DYNLOCKID),	"CRYPTO_get_new_dynlockid"},
-{ERR_FUNC(CRYPTO_F_CRYPTO_GET_NEW_LOCKID),	"CRYPTO_get_new_lockid"},
-{ERR_FUNC(CRYPTO_F_CRYPTO_SET_EX_DATA),	"CRYPTO_set_ex_data"},
-{ERR_FUNC(CRYPTO_F_DEF_ADD_INDEX),	"DEF_ADD_INDEX"},
-{ERR_FUNC(CRYPTO_F_DEF_GET_CLASS),	"DEF_GET_CLASS"},
-{ERR_FUNC(CRYPTO_F_INT_DUP_EX_DATA),	"INT_DUP_EX_DATA"},
-{ERR_FUNC(CRYPTO_F_INT_FREE_EX_DATA),	"INT_FREE_EX_DATA"},
-{ERR_FUNC(CRYPTO_F_INT_NEW_EX_DATA),	"INT_NEW_EX_DATA"},
-{0,NULL}
-	};
-
-static ERR_STRING_DATA CRYPTO_str_reasons[]=
-	{
-{ERR_REASON(CRYPTO_R_NO_DYNLOCK_CREATE_CALLBACK),"no dynlock create callback"},
-{0,NULL}
-	};
-
-#endif
-
-void ERR_load_CRYPTO_strings(void)
-	{
-#ifndef OPENSSL_NO_ERR
-
-	if (ERR_func_error_string(CRYPTO_str_functs[0].error) == NULL)
-		{
-		ERR_load_strings(0,CRYPTO_str_functs);
-		ERR_load_strings(0,CRYPTO_str_reasons);
-		}
-#endif
-	}
diff --git a/crypto/openssl/crypto/cryptlib.c b/crypto/openssl/crypto/cryptlib.c
deleted file mode 100644
index 86af760d3813..000000000000
--- a/crypto/openssl/crypto/cryptlib.c
+++ /dev/null
@@ -1,758 +0,0 @@
-/* crypto/cryptlib.c */
-/* ====================================================================
- * Copyright (c) 1998-2003 The OpenSSL Project.  All rights reserved.
- *
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions
- * are met:
- *
- * 1. Redistributions of source code must retain the above copyright
- *    notice, this list of conditions and the following disclaimer. 
- *
- * 2. Redistributions in binary form must reproduce the above copyright
- *    notice, this list of conditions and the following disclaimer in
- *    the documentation and/or other materials provided with the
- *    distribution.
- *
- * 3. All advertising materials mentioning features or use of this
- *    software must display the following acknowledgment:
- *    "This product includes software developed by the OpenSSL Project
- *    for use in the OpenSSL Toolkit. (http://www.openssl.org/)"
- *
- * 4. The names "OpenSSL Toolkit" and "OpenSSL Project" must not be used to
- *    endorse or promote products derived from this software without
- *    prior written permission. For written permission, please contact
- *    openssl-core@openssl.org.
- *
- * 5. Products derived from this software may not be called "OpenSSL"
- *    nor may "OpenSSL" appear in their names without prior written
- *    permission of the OpenSSL Project.
- *
- * 6. Redistributions of any form whatsoever must retain the following
- *    acknowledgment:
- *    "This product includes software developed by the OpenSSL Project
- *    for use in the OpenSSL Toolkit (http://www.openssl.org/)"
- *
- * THIS SOFTWARE IS PROVIDED BY THE OpenSSL PROJECT ``AS IS'' AND ANY
- * EXPRESSED OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
- * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR
- * PURPOSE ARE DISCLAIMED.  IN NO EVENT SHALL THE OpenSSL PROJECT OR
- * ITS CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
- * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
- * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
- * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
- * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
- * STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
- * ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED
- * OF THE POSSIBILITY OF SUCH DAMAGE.
- * ====================================================================
- *
- * This product includes cryptographic software written by Eric Young
- * (eay@cryptsoft.com).  This product includes software written by Tim
- * Hudson (tjh@cryptsoft.com).
- *
- */
-/* Copyright (C) 1995-1998 Eric Young (eay@cryptsoft.com)
- * All rights reserved.
- *
- * This package is an SSL implementation written
- * by Eric Young (eay@cryptsoft.com).
- * The implementation was written so as to conform with Netscapes SSL.
- * 
- * This library is free for commercial and non-commercial use as long as
- * the following conditions are aheared to.  The following conditions
- * apply to all code found in this distribution, be it the RC4, RSA,
- * lhash, DES, etc., code; not just the SSL code.  The SSL documentation
- * included with this distribution is covered by the same copyright terms
- * except that the holder is Tim Hudson (tjh@cryptsoft.com).
- * 
- * Copyright remains Eric Young's, and as such any Copyright notices in
- * the code are not to be removed.
- * If this package is used in a product, Eric Young should be given attribution
- * as the author of the parts of the library used.
- * This can be in the form of a textual message at program startup or
- * in documentation (online or textual) provided with the package.
- * 
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions
- * are met:
- * 1. Redistributions of source code must retain the copyright
- *    notice, this list of conditions and the following disclaimer.
- * 2. Redistributions in binary form must reproduce the above copyright
- *    notice, this list of conditions and the following disclaimer in the
- *    documentation and/or other materials provided with the distribution.
- * 3. All advertising materials mentioning features or use of this software
- *    must display the following acknowledgement:
- *    "This product includes cryptographic software written by
- *     Eric Young (eay@cryptsoft.com)"
- *    The word 'cryptographic' can be left out if the rouines from the library
- *    being used are not cryptographic related :-).
- * 4. If you include any Windows specific code (or a derivative thereof) from 
- *    the apps directory (application code) you must include an acknowledgement:
- *    "This product includes software written by Tim Hudson (tjh@cryptsoft.com)"
- * 
- * THIS SOFTWARE IS PROVIDED BY ERIC YOUNG ``AS IS'' AND
- * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
- * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
- * ARE DISCLAIMED.  IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE
- * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
- * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
- * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
- * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
- * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
- * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
- * SUCH DAMAGE.
- * 
- * The licence and distribution terms for any publically available version or
- * derivative of this code cannot be changed.  i.e. this code cannot simply be
- * copied and put under another distribution licence
- * [including the GNU Public Licence.]
- */
-/* ====================================================================
- * Copyright 2002 Sun Microsystems, Inc. ALL RIGHTS RESERVED.
- * ECDH support in OpenSSL originally developed by 
- * SUN MICROSYSTEMS, INC., and contributed to the OpenSSL project.
- */
-
-#include "cryptlib.h"
-#include <openssl/safestack.h>
-
-#if defined(OPENSSL_SYS_WIN32) || defined(OPENSSL_SYS_WIN16)
-static double SSLeay_MSVC5_hack=0.0; /* and for VC1.5 */
-#endif
-
-DECLARE_STACK_OF(CRYPTO_dynlock)
-IMPLEMENT_STACK_OF(CRYPTO_dynlock)
-
-/* real #defines in crypto.h, keep these upto date */
-static const char* const lock_names[CRYPTO_NUM_LOCKS] =
-	{
-	"<<ERROR>>",
-	"err",
-	"ex_data",
-	"x509",
-	"x509_info",
-	"x509_pkey",
-	"x509_crl",
-	"x509_req",
-	"dsa",
-	"rsa",
-	"evp_pkey",
-	"x509_store",
-	"ssl_ctx",
-	"ssl_cert",
-	"ssl_session",
-	"ssl_sess_cert",
-	"ssl",
-	"ssl_method",
-	"rand",
-	"rand2",
-	"debug_malloc",
-	"BIO",
-	"gethostbyname",
-	"getservbyname",
-	"readdir",
-	"RSA_blinding",
-	"dh",
-	"debug_malloc2",
-	"dso",
-	"dynlock",
-	"engine",
-	"ui",
-	"ecdsa",
-	"ec",
-	"ecdh",
-	"bn",
-	"ec_pre_comp",
-	"store",
-	"comp",
-#if CRYPTO_NUM_LOCKS != 39
-# error "Inconsistency between crypto.h and cryptlib.c"
-#endif
-	};
-
-/* This is for applications to allocate new type names in the non-dynamic
-   array of lock names.  These are numbered with positive numbers.  */
-static STACK *app_locks=NULL;
-
-/* For applications that want a more dynamic way of handling threads, the
-   following stack is used.  These are externally numbered with negative
-   numbers.  */
-static STACK_OF(CRYPTO_dynlock) *dyn_locks=NULL;
-
-
-static void (MS_FAR *locking_callback)(int mode,int type,
-	const char *file,int line)=NULL;
-static int (MS_FAR *add_lock_callback)(int *pointer,int amount,
-	int type,const char *file,int line)=NULL;
-static unsigned long (MS_FAR *id_callback)(void)=NULL;
-static struct CRYPTO_dynlock_value *(MS_FAR *dynlock_create_callback)
-	(const char *file,int line)=NULL;
-static void (MS_FAR *dynlock_lock_callback)(int mode,
-	struct CRYPTO_dynlock_value *l, const char *file,int line)=NULL;
-static void (MS_FAR *dynlock_destroy_callback)(struct CRYPTO_dynlock_value *l,
-	const char *file,int line)=NULL;
-
-int CRYPTO_get_new_lockid(char *name)
-	{
-	char *str;
-	int i;
-
-#if defined(OPENSSL_SYS_WIN32) || defined(OPENSSL_SYS_WIN16)
-	/* A hack to make Visual C++ 5.0 work correctly when linking as
-	 * a DLL using /MT. Without this, the application cannot use
-	 * and floating point printf's.
-	 * It also seems to be needed for Visual C 1.5 (win16) */
-	SSLeay_MSVC5_hack=(double)name[0]*(double)name[1];
-#endif
-
-	if ((app_locks == NULL) && ((app_locks=sk_new_null()) == NULL))
-		{
-		CRYPTOerr(CRYPTO_F_CRYPTO_GET_NEW_LOCKID,ERR_R_MALLOC_FAILURE);
-		return(0);
-		}
-	if ((str=BUF_strdup(name)) == NULL)
-		{
-		CRYPTOerr(CRYPTO_F_CRYPTO_GET_NEW_LOCKID,ERR_R_MALLOC_FAILURE);
-		return(0);
-		}
-	i=sk_push(app_locks,str);
-	if (!i)
-		OPENSSL_free(str);
-	else
-		i+=CRYPTO_NUM_LOCKS; /* gap of one :-) */
-	return(i);
-	}
-
-int CRYPTO_num_locks(void)
-	{
-	return CRYPTO_NUM_LOCKS;
-	}
-
-int CRYPTO_get_new_dynlockid(void)
-	{
-	int i = 0;
-	CRYPTO_dynlock *pointer = NULL;
-
-	if (dynlock_create_callback == NULL)
-		{
-		CRYPTOerr(CRYPTO_F_CRYPTO_GET_NEW_DYNLOCKID,CRYPTO_R_NO_DYNLOCK_CREATE_CALLBACK);
-		return(0);
-		}
-	CRYPTO_w_lock(CRYPTO_LOCK_DYNLOCK);
-	if ((dyn_locks == NULL)
-		&& ((dyn_locks=sk_CRYPTO_dynlock_new_null()) == NULL))
-		{
-		CRYPTO_w_unlock(CRYPTO_LOCK_DYNLOCK);
-		CRYPTOerr(CRYPTO_F_CRYPTO_GET_NEW_DYNLOCKID,ERR_R_MALLOC_FAILURE);
-		return(0);
-		}
-	CRYPTO_w_unlock(CRYPTO_LOCK_DYNLOCK);
-
-	pointer = (CRYPTO_dynlock *)OPENSSL_malloc(sizeof(CRYPTO_dynlock));
-	if (pointer == NULL)
-		{
-		CRYPTOerr(CRYPTO_F_CRYPTO_GET_NEW_DYNLOCKID,ERR_R_MALLOC_FAILURE);
-		return(0);
-		}
-	pointer->references = 1;
-	pointer->data = dynlock_create_callback(__FILE__,__LINE__);
-	if (pointer->data == NULL)
-		{
-		OPENSSL_free(pointer);
-		CRYPTOerr(CRYPTO_F_CRYPTO_GET_NEW_DYNLOCKID,ERR_R_MALLOC_FAILURE);
-		return(0);
-		}
-
-	CRYPTO_w_lock(CRYPTO_LOCK_DYNLOCK);
-	/* First, try to find an existing empty slot */
-	i=sk_CRYPTO_dynlock_find(dyn_locks,NULL);
-	/* If there was none, push, thereby creating a new one */
-	if (i == -1)
-		/* Since sk_push() returns the number of items on the
-		   stack, not the location of the pushed item, we need
-		   to transform the returned number into a position,
-		   by decreasing it.  */
-		i=sk_CRYPTO_dynlock_push(dyn_locks,pointer) - 1;
-	else
-		/* If we found a place with a NULL pointer, put our pointer
-		   in it.  */
-		sk_CRYPTO_dynlock_set(dyn_locks,i,pointer);
-	CRYPTO_w_unlock(CRYPTO_LOCK_DYNLOCK);
-
-	if (i == -1)
-		{
-		dynlock_destroy_callback(pointer->data,__FILE__,__LINE__);
-		OPENSSL_free(pointer);
-		}
-	else
-		i += 1; /* to avoid 0 */
-	return -i;
-	}
-
-void CRYPTO_destroy_dynlockid(int i)
-	{
-	CRYPTO_dynlock *pointer = NULL;
-	if (i)
-		i = -i-1;
-	if (dynlock_destroy_callback == NULL)
-		return;
-
-	CRYPTO_w_lock(CRYPTO_LOCK_DYNLOCK);
-
-	if (dyn_locks == NULL || i >= sk_CRYPTO_dynlock_num(dyn_locks))
-		{
-		CRYPTO_w_unlock(CRYPTO_LOCK_DYNLOCK);
-		return;
-		}
-	pointer = sk_CRYPTO_dynlock_value(dyn_locks, i);
-	if (pointer != NULL)
-		{
-		--pointer->references;
-#ifdef REF_CHECK
-		if (pointer->references < 0)
-			{
-			fprintf(stderr,"CRYPTO_destroy_dynlockid, bad reference count\n");
-			abort();
-			}
-		else
-#endif
-			if (pointer->references <= 0)
-				{
-				sk_CRYPTO_dynlock_set(dyn_locks, i, NULL);
-				}
-			else
-				pointer = NULL;
-		}
-	CRYPTO_w_unlock(CRYPTO_LOCK_DYNLOCK);
-
-	if (pointer)
-		{
-		dynlock_destroy_callback(pointer->data,__FILE__,__LINE__);
-		OPENSSL_free(pointer);
-		}
-	}
-
-struct CRYPTO_dynlock_value *CRYPTO_get_dynlock_value(int i)
-	{
-	CRYPTO_dynlock *pointer = NULL;
-	if (i)
-		i = -i-1;
-
-	CRYPTO_w_lock(CRYPTO_LOCK_DYNLOCK);
-
-	if (dyn_locks != NULL && i < sk_CRYPTO_dynlock_num(dyn_locks))
-		pointer = sk_CRYPTO_dynlock_value(dyn_locks, i);
-	if (pointer)
-		pointer->references++;
-
-	CRYPTO_w_unlock(CRYPTO_LOCK_DYNLOCK);
-
-	if (pointer)
-		return pointer->data;
-	return NULL;
-	}
-
-struct CRYPTO_dynlock_value *(*CRYPTO_get_dynlock_create_callback(void))
-	(const char *file,int line)
-	{
-	return(dynlock_create_callback);
-	}
-
-void (*CRYPTO_get_dynlock_lock_callback(void))(int mode,
-	struct CRYPTO_dynlock_value *l, const char *file,int line)
-	{
-	return(dynlock_lock_callback);
-	}
-
-void (*CRYPTO_get_dynlock_destroy_callback(void))
-	(struct CRYPTO_dynlock_value *l, const char *file,int line)
-	{
-	return(dynlock_destroy_callback);
-	}
-
-void CRYPTO_set_dynlock_create_callback(struct CRYPTO_dynlock_value *(*func)
-	(const char *file, int line))
-	{
-	dynlock_create_callback=func;
-	}
-
-void CRYPTO_set_dynlock_lock_callback(void (*func)(int mode,
-	struct CRYPTO_dynlock_value *l, const char *file, int line))
-	{
-	dynlock_lock_callback=func;
-	}
-
-void CRYPTO_set_dynlock_destroy_callback(void (*func)
-	(struct CRYPTO_dynlock_value *l, const char *file, int line))
-	{
-	dynlock_destroy_callback=func;
-	}
-
-
-void (*CRYPTO_get_locking_callback(void))(int mode,int type,const char *file,
-		int line)
-	{
-	return(locking_callback);
-	}
-
-int (*CRYPTO_get_add_lock_callback(void))(int *num,int mount,int type,
-					  const char *file,int line)
-	{
-	return(add_lock_callback);
-	}
-
-void CRYPTO_set_locking_callback(void (*func)(int mode,int type,
-					      const char *file,int line))
-	{
-	locking_callback=func;
-	}
-
-void CRYPTO_set_add_lock_callback(int (*func)(int *num,int mount,int type,
-					      const char *file,int line))
-	{
-	add_lock_callback=func;
-	}
-
-unsigned long (*CRYPTO_get_id_callback(void))(void)
-	{
-	return(id_callback);
-	}
-
-void CRYPTO_set_id_callback(unsigned long (*func)(void))
-	{
-	id_callback=func;
-	}
-
-unsigned long CRYPTO_thread_id(void)
-	{
-	unsigned long ret=0;
-
-	if (id_callback == NULL)
-		{
-#ifdef OPENSSL_SYS_WIN16
-		ret=(unsigned long)GetCurrentTask();
-#elif defined(OPENSSL_SYS_WIN32)
-		ret=(unsigned long)GetCurrentThreadId();
-#elif defined(GETPID_IS_MEANINGLESS)
-		ret=1L;
-#else
-		ret=(unsigned long)getpid();
-#endif
-		}
-	else
-		ret=id_callback();
-	return(ret);
-	}
-
-void CRYPTO_lock(int mode, int type, const char *file, int line)
-	{
-#ifdef LOCK_DEBUG
-		{
-		char *rw_text,*operation_text;
-
-		if (mode & CRYPTO_LOCK)
-			operation_text="lock  ";
-		else if (mode & CRYPTO_UNLOCK)
-			operation_text="unlock";
-		else
-			operation_text="ERROR ";
-
-		if (mode & CRYPTO_READ)
-			rw_text="r";
-		else if (mode & CRYPTO_WRITE)
-			rw_text="w";
-		else
-			rw_text="ERROR";
-
-		fprintf(stderr,"lock:%08lx:(%s)%s %-18s %s:%d\n",
-			CRYPTO_thread_id(), rw_text, operation_text,
-			CRYPTO_get_lock_name(type), file, line);
-		}
-#endif
-	if (type < 0)
-		{
-		if (dynlock_lock_callback != NULL)
-			{
-			struct CRYPTO_dynlock_value *pointer
-				= CRYPTO_get_dynlock_value(type);
-
-			OPENSSL_assert(pointer != NULL);
-
-			dynlock_lock_callback(mode, pointer, file, line);
-
-			CRYPTO_destroy_dynlockid(type);
-			}
-		}
-	else
-		if (locking_callback != NULL)
-			locking_callback(mode,type,file,line);
-	}
-
-int CRYPTO_add_lock(int *pointer, int amount, int type, const char *file,
-	     int line)
-	{
-	int ret = 0;
-
-	if (add_lock_callback != NULL)
-		{
-#ifdef LOCK_DEBUG
-		int before= *pointer;
-#endif
-
-		ret=add_lock_callback(pointer,amount,type,file,line);
-#ifdef LOCK_DEBUG
-		fprintf(stderr,"ladd:%08lx:%2d+%2d->%2d %-18s %s:%d\n",
-			CRYPTO_thread_id(),
-			before,amount,ret,
-			CRYPTO_get_lock_name(type),
-			file,line);
-#endif
-		}
-	else
-		{
-		CRYPTO_lock(CRYPTO_LOCK|CRYPTO_WRITE,type,file,line);
-
-		ret= *pointer+amount;
-#ifdef LOCK_DEBUG
-		fprintf(stderr,"ladd:%08lx:%2d+%2d->%2d %-18s %s:%d\n",
-			CRYPTO_thread_id(),
-			*pointer,amount,ret,
-			CRYPTO_get_lock_name(type),
-			file,line);
-#endif
-		*pointer=ret;
-		CRYPTO_lock(CRYPTO_UNLOCK|CRYPTO_WRITE,type,file,line);
-		}
-	return(ret);
-	}
-
-const char *CRYPTO_get_lock_name(int type)
-	{
-	if (type < 0)
-		return("dynamic");
-	else if (type < CRYPTO_NUM_LOCKS)
-		return(lock_names[type]);
-	else if (type-CRYPTO_NUM_LOCKS > sk_num(app_locks))
-		return("ERROR");
-	else
-		return(sk_value(app_locks,type-CRYPTO_NUM_LOCKS));
-	}
-
-#if	defined(__i386)   || defined(__i386__)   || defined(_M_IX86) || \
-	defined(__INTEL__) || \
-	defined(__x86_64) || defined(__x86_64__) || defined(_M_AMD64)
-
-unsigned long  OPENSSL_ia32cap_P=0;
-unsigned long *OPENSSL_ia32cap_loc(void) { return &OPENSSL_ia32cap_P; }
-
-#if defined(OPENSSL_CPUID_OBJ) && !defined(OPENSSL_NO_ASM) && !defined(I386_ONLY)
-#define OPENSSL_CPUID_SETUP
-void OPENSSL_cpuid_setup(void)
-{ static int trigger=0;
-  unsigned long OPENSSL_ia32_cpuid(void);
-  char *env;
-
-    if (trigger)	return;
-
-    trigger=1;
-    if ((env=getenv("OPENSSL_ia32cap")))
-	OPENSSL_ia32cap_P = strtoul(env,NULL,0)|(1<<10);
-    else
-	OPENSSL_ia32cap_P = OPENSSL_ia32_cpuid()|(1<<10);
-    /*
-     * |(1<<10) sets a reserved bit to signal that variable
-     * was initialized already... This is to avoid interference
-     * with cpuid snippets in ELF .init segment.
-     */
-}
-#endif
-
-#else
-unsigned long *OPENSSL_ia32cap_loc(void) { return NULL; }
-#endif
-int OPENSSL_NONPIC_relocated = 0;
-#if !defined(OPENSSL_CPUID_SETUP)
-void OPENSSL_cpuid_setup(void) {}
-#endif
-
-#if (defined(_WIN32) || defined(__CYGWIN__)) && defined(_WINDLL)
-#ifdef __CYGWIN__
-/* pick DLL_[PROCESS|THREAD]_[ATTACH|DETACH] definitions */
-#include <windows.h>
-#endif
-
-/* All we really need to do is remove the 'error' state when a thread
- * detaches */
-
-BOOL WINAPI DllMain(HINSTANCE hinstDLL, DWORD fdwReason,
-	     LPVOID lpvReserved)
-	{
-	switch(fdwReason)
-		{
-	case DLL_PROCESS_ATTACH:
-		OPENSSL_cpuid_setup();
-#if defined(_WIN32_WINNT)
-		{
-		IMAGE_DOS_HEADER *dos_header = (IMAGE_DOS_HEADER *)hinstDLL;
-		IMAGE_NT_HEADERS *nt_headers;
-
-		if (dos_header->e_magic==IMAGE_DOS_SIGNATURE)
-			{
-			nt_headers = (IMAGE_NT_HEADERS *)((char *)dos_header
-						+ dos_header->e_lfanew);
-			if (nt_headers->Signature==IMAGE_NT_SIGNATURE &&
-			    hinstDLL!=(HINSTANCE)(nt_headers->OptionalHeader.ImageBase))
-				OPENSSL_NONPIC_relocated=1;
-			}
-		}
-#endif
-		break;
-	case DLL_THREAD_ATTACH:
-		break;
-	case DLL_THREAD_DETACH:
-		ERR_remove_state(0);
-		break;
-	case DLL_PROCESS_DETACH:
-		break;
-		}
-	return(TRUE);
-	}
-#endif
-
-#if defined(_WIN32) && !defined(__CYGWIN__)
-#include <tchar.h>
-
-#if defined(_WIN32_WINNT) && _WIN32_WINNT>=0x0333
-int OPENSSL_isservice(void)
-{ HWINSTA h;
-  DWORD len;
-  WCHAR *name;
-
-    (void)GetDesktopWindow(); /* return value is ignored */
-
-    h = GetProcessWindowStation();
-    if (h==NULL) return -1;
-
-    if (GetUserObjectInformationW (h,UOI_NAME,NULL,0,&len) ||
-	GetLastError() != ERROR_INSUFFICIENT_BUFFER)
-	return -1;
-
-    if (len>512) return -1;		/* paranoia */
-    len++,len&=~1;			/* paranoia */
-#ifdef _MSC_VER
-    name=(WCHAR *)_alloca(len+sizeof(WCHAR));
-#else
-    name=(WCHAR *)alloca(len+sizeof(WCHAR));
-#endif
-    if (!GetUserObjectInformationW (h,UOI_NAME,name,len,&len))
-	return -1;
-
-    len++,len&=~1;			/* paranoia */
-    name[len/sizeof(WCHAR)]=L'\0';	/* paranoia */
-#if 1
-    /* This doesn't cover "interactive" services [working with real
-     * WinSta0's] nor programs started non-interactively by Task
-     * Scheduler [those are working with SAWinSta]. */
-    if (wcsstr(name,L"Service-0x"))	return 1;
-#else
-    /* This covers all non-interactive programs such as services. */
-    if (!wcsstr(name,L"WinSta0"))	return 1;
-#endif
-    else				return 0;
-}
-#else
-int OPENSSL_isservice(void) { return 0; }
-#endif
-
-void OPENSSL_showfatal (const char *fmta,...)
-{ va_list ap;
-  TCHAR buf[256];
-  const TCHAR *fmt;
-#ifdef STD_ERROR_HANDLE	/* what a dirty trick! */
-  HANDLE h;
-
-    if ((h=GetStdHandle(STD_ERROR_HANDLE)) != NULL &&
-	GetFileType(h)!=FILE_TYPE_UNKNOWN)
-    {	/* must be console application */
-	va_start (ap,fmta);
-	vfprintf (stderr,fmta,ap);
-	va_end (ap);
-	return;
-    }
-#endif
-
-    if (sizeof(TCHAR)==sizeof(char))
-	fmt=(const TCHAR *)fmta;
-    else do
-    { int    keepgoing;
-      size_t len_0=strlen(fmta)+1,i;
-      WCHAR *fmtw;
-
-#ifdef _MSC_VER
-	fmtw = (WCHAR *)_alloca (len_0*sizeof(WCHAR));
-#else
-	fmtw = (WCHAR *)alloca (len_0*sizeof(WCHAR));
-#endif
-	if (fmtw == NULL) { fmt=(const TCHAR *)L"no stack?"; break; }
-
-#ifndef OPENSSL_NO_MULTIBYTE
-	if (!MultiByteToWideChar(CP_ACP,0,fmta,len_0,fmtw,len_0))
-#endif
-	    for (i=0;i<len_0;i++) fmtw[i]=(WCHAR)fmta[i];
-
-	for (i=0;i<len_0;i++)
-	{   if (fmtw[i]==L'%') do
-	    {	keepgoing=0;
-		switch (fmtw[i+1])
-		{   case L'0': case L'1': case L'2': case L'3': case L'4':
-		    case L'5': case L'6': case L'7': case L'8': case L'9':
-		    case L'.': case L'*':
-		    case L'-':	i++; keepgoing=1; break;
-		    case L's':	fmtw[i+1]=L'S';   break;
-		    case L'S':	fmtw[i+1]=L's';   break;
-		    case L'c':	fmtw[i+1]=L'C';   break;
-		    case L'C':	fmtw[i+1]=L'c';   break;
-		}
-	    } while (keepgoing);
-	}
-	fmt = (const TCHAR *)fmtw;
-    } while (0);
-
-    va_start (ap,fmta);
-    _vsntprintf (buf,sizeof(buf)/sizeof(TCHAR)-1,fmt,ap);
-    buf [sizeof(buf)/sizeof(TCHAR)-1] = _T('\0');
-    va_end (ap);
-
-#if defined(_WIN32_WINNT) && _WIN32_WINNT>=0x0333
-    /* this -------------v--- guards NT-specific calls */
-    if (GetVersion() < 0x80000000 && OPENSSL_isservice())
-    {	HANDLE h = RegisterEventSource(0,_T("OPENSSL"));
-	const TCHAR *pmsg=buf;
-	ReportEvent(h,EVENTLOG_ERROR_TYPE,0,0,0,1,0,&pmsg,0);
-	DeregisterEventSource(h);
-    }
-    else
-#endif
-	MessageBox (NULL,buf,_T("OpenSSL: FATAL"),MB_OK|MB_ICONSTOP);
-}
-#else
-void OPENSSL_showfatal (const char *fmta,...)
-{ va_list ap;
-
-    va_start (ap,fmta);
-    vfprintf (stderr,fmta,ap);
-    va_end (ap);
-}
-int OPENSSL_isservice (void) { return 0; }
-#endif
-
-void OpenSSLDie(const char *file,int line,const char *assertion)
-	{
-	OPENSSL_showfatal(
-		"%s(%d): OpenSSL internal error, assertion failed: %s\n",
-		file,line,assertion);
-	abort();
-	}
-
-void *OPENSSL_stderr(void)	{ return stderr; }
diff --git a/crypto/openssl/crypto/cryptlib.h b/crypto/openssl/crypto/cryptlib.h
deleted file mode 100644
index 5ceaa964b532..000000000000
--- a/crypto/openssl/crypto/cryptlib.h
+++ /dev/null
@@ -1,112 +0,0 @@
-/* crypto/cryptlib.h */
-/* Copyright (C) 1995-1998 Eric Young (eay@cryptsoft.com)
- * All rights reserved.
- *
- * This package is an SSL implementation written
- * by Eric Young (eay@cryptsoft.com).
- * The implementation was written so as to conform with Netscapes SSL.
- * 
- * This library is free for commercial and non-commercial use as long as
- * the following conditions are aheared to.  The following conditions
- * apply to all code found in this distribution, be it the RC4, RSA,
- * lhash, DES, etc., code; not just the SSL code.  The SSL documentation
- * included with this distribution is covered by the same copyright terms
- * except that the holder is Tim Hudson (tjh@cryptsoft.com).
- * 
- * Copyright remains Eric Young's, and as such any Copyright notices in
- * the code are not to be removed.
- * If this package is used in a product, Eric Young should be given attribution
- * as the author of the parts of the library used.
- * This can be in the form of a textual message at program startup or
- * in documentation (online or textual) provided with the package.
- * 
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions
- * are met:
- * 1. Redistributions of source code must retain the copyright
- *    notice, this list of conditions and the following disclaimer.
- * 2. Redistributions in binary form must reproduce the above copyright
- *    notice, this list of conditions and the following disclaimer in the
- *    documentation and/or other materials provided with the distribution.
- * 3. All advertising materials mentioning features or use of this software
- *    must display the following acknowledgement:
- *    "This product includes cryptographic software written by
- *     Eric Young (eay@cryptsoft.com)"
- *    The word 'cryptographic' can be left out if the rouines from the library
- *    being used are not cryptographic related :-).
- * 4. If you include any Windows specific code (or a derivative thereof) from 
- *    the apps directory (application code) you must include an acknowledgement:
- *    "This product includes software written by Tim Hudson (tjh@cryptsoft.com)"
- * 
- * THIS SOFTWARE IS PROVIDED BY ERIC YOUNG ``AS IS'' AND
- * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
- * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
- * ARE DISCLAIMED.  IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE
- * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
- * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
- * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
- * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
- * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
- * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
- * SUCH DAMAGE.
- * 
- * The licence and distribution terms for any publically available version or
- * derivative of this code cannot be changed.  i.e. this code cannot simply be
- * copied and put under another distribution licence
- * [including the GNU Public Licence.]
- */
-
-#ifndef HEADER_CRYPTLIB_H
-#define HEADER_CRYPTLIB_H
-
-#include <stdlib.h>
-#include <string.h>
-
-#include "e_os.h"
-
-#ifdef OPENSSL_USE_APPLINK
-#define BIO_FLAGS_UPLINK 0x8000
-#include "ms/uplink.h"
-#endif
-
-#include <openssl/crypto.h>
-#include <openssl/buffer.h> 
-#include <openssl/bio.h> 
-#include <openssl/err.h>
-#include <openssl/opensslconf.h>
-
-#ifdef  __cplusplus
-extern "C" {
-#endif
-
-#ifndef OPENSSL_SYS_VMS
-#define X509_CERT_AREA		OPENSSLDIR
-#define X509_CERT_DIR		OPENSSLDIR "/certs"
-#define X509_CERT_FILE		OPENSSLDIR "/cert.pem"
-#define X509_PRIVATE_DIR	OPENSSLDIR "/private"
-#else
-#define X509_CERT_AREA		"SSLROOT:[000000]"
-#define X509_CERT_DIR		"SSLCERTS:"
-#define X509_CERT_FILE		"SSLCERTS:cert.pem"
-#define X509_PRIVATE_DIR        "SSLPRIVATE:"
-#endif
-
-#define X509_CERT_DIR_EVP        "SSL_CERT_DIR"
-#define X509_CERT_FILE_EVP       "SSL_CERT_FILE"
-
-/* size of string representations */
-#define DECIMAL_SIZE(type)	((sizeof(type)*8+2)/3+1)
-#define HEX_SIZE(type)		(sizeof(type)*2)
-
-void OPENSSL_cpuid_setup(void);
-extern unsigned long OPENSSL_ia32cap_P;
-void OPENSSL_showfatal(const char *,...);
-void *OPENSSL_stderr(void);
-extern int OPENSSL_NONPIC_relocated;
-int OPENSSL_isservice(void);
-
-#ifdef  __cplusplus
-}
-#endif
-
-#endif
diff --git a/crypto/openssl/crypto/crypto.h b/crypto/openssl/crypto/crypto.h
deleted file mode 100644
index d2b5ffe3325b..000000000000
--- a/crypto/openssl/crypto/crypto.h
+++ /dev/null
@@ -1,550 +0,0 @@
-/* crypto/crypto.h */
-/* ====================================================================
- * Copyright (c) 1998-2003 The OpenSSL Project.  All rights reserved.
- *
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions
- * are met:
- *
- * 1. Redistributions of source code must retain the above copyright
- *    notice, this list of conditions and the following disclaimer. 
- *
- * 2. Redistributions in binary form must reproduce the above copyright
- *    notice, this list of conditions and the following disclaimer in
- *    the documentation and/or other materials provided with the
- *    distribution.
- *
- * 3. All advertising materials mentioning features or use of this
- *    software must display the following acknowledgment:
- *    "This product includes software developed by the OpenSSL Project
- *    for use in the OpenSSL Toolkit. (http://www.openssl.org/)"
- *
- * 4. The names "OpenSSL Toolkit" and "OpenSSL Project" must not be used to
- *    endorse or promote products derived from this software without
- *    prior written permission. For written permission, please contact
- *    openssl-core@openssl.org.
- *
- * 5. Products derived from this software may not be called "OpenSSL"
- *    nor may "OpenSSL" appear in their names without prior written
- *    permission of the OpenSSL Project.
- *
- * 6. Redistributions of any form whatsoever must retain the following
- *    acknowledgment:
- *    "This product includes software developed by the OpenSSL Project
- *    for use in the OpenSSL Toolkit (http://www.openssl.org/)"
- *
- * THIS SOFTWARE IS PROVIDED BY THE OpenSSL PROJECT ``AS IS'' AND ANY
- * EXPRESSED OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
- * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR
- * PURPOSE ARE DISCLAIMED.  IN NO EVENT SHALL THE OpenSSL PROJECT OR
- * ITS CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
- * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
- * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
- * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
- * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
- * STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
- * ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED
- * OF THE POSSIBILITY OF SUCH DAMAGE.
- * ====================================================================
- *
- * This product includes cryptographic software written by Eric Young
- * (eay@cryptsoft.com).  This product includes software written by Tim
- * Hudson (tjh@cryptsoft.com).
- *
- */
-/* Copyright (C) 1995-1998 Eric Young (eay@cryptsoft.com)
- * All rights reserved.
- *
- * This package is an SSL implementation written
- * by Eric Young (eay@cryptsoft.com).
- * The implementation was written so as to conform with Netscapes SSL.
- * 
- * This library is free for commercial and non-commercial use as long as
- * the following conditions are aheared to.  The following conditions
- * apply to all code found in this distribution, be it the RC4, RSA,
- * lhash, DES, etc., code; not just the SSL code.  The SSL documentation
- * included with this distribution is covered by the same copyright terms
- * except that the holder is Tim Hudson (tjh@cryptsoft.com).
- * 
- * Copyright remains Eric Young's, and as such any Copyright notices in
- * the code are not to be removed.
- * If this package is used in a product, Eric Young should be given attribution
- * as the author of the parts of the library used.
- * This can be in the form of a textual message at program startup or
- * in documentation (online or textual) provided with the package.
- * 
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions
- * are met:
- * 1. Redistributions of source code must retain the copyright
- *    notice, this list of conditions and the following disclaimer.
- * 2. Redistributions in binary form must reproduce the above copyright
- *    notice, this list of conditions and the following disclaimer in the
- *    documentation and/or other materials provided with the distribution.
- * 3. All advertising materials mentioning features or use of this software
- *    must display the following acknowledgement:
- *    "This product includes cryptographic software written by
- *     Eric Young (eay@cryptsoft.com)"
- *    The word 'cryptographic' can be left out if the rouines from the library
- *    being used are not cryptographic related :-).
- * 4. If you include any Windows specific code (or a derivative thereof) from 
- *    the apps directory (application code) you must include an acknowledgement:
- *    "This product includes software written by Tim Hudson (tjh@cryptsoft.com)"
- * 
- * THIS SOFTWARE IS PROVIDED BY ERIC YOUNG ``AS IS'' AND
- * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
- * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
- * ARE DISCLAIMED.  IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE
- * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
- * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
- * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
- * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
- * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
- * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
- * SUCH DAMAGE.
- * 
- * The licence and distribution terms for any publically available version or
- * derivative of this code cannot be changed.  i.e. this code cannot simply be
- * copied and put under another distribution licence
- * [including the GNU Public Licence.]
- */
-/* ====================================================================
- * Copyright 2002 Sun Microsystems, Inc. ALL RIGHTS RESERVED.
- * ECDH support in OpenSSL originally developed by 
- * SUN MICROSYSTEMS, INC., and contributed to the OpenSSL project.
- */
-
-#ifndef HEADER_CRYPTO_H
-#define HEADER_CRYPTO_H
-
-#include <stdlib.h>
-
-#include <openssl/e_os2.h>
-
-#ifndef OPENSSL_NO_FP_API
-#include <stdio.h>
-#endif
-
-#include <openssl/stack.h>
-#include <openssl/safestack.h>
-#include <openssl/opensslv.h>
-#include <openssl/ossl_typ.h>
-
-#ifdef CHARSET_EBCDIC
-#include <openssl/ebcdic.h>
-#endif
-
-/* Resolve problems on some operating systems with symbol names that clash
-   one way or another */
-#include <openssl/symhacks.h>
-
-#ifdef  __cplusplus
-extern "C" {
-#endif
-
-/* Backward compatibility to SSLeay */
-/* This is more to be used to check the correct DLL is being used
- * in the MS world. */
-#define SSLEAY_VERSION_NUMBER	OPENSSL_VERSION_NUMBER
-#define SSLEAY_VERSION		0
-/* #define SSLEAY_OPTIONS	1 no longer supported */
-#define SSLEAY_CFLAGS		2
-#define SSLEAY_BUILT_ON		3
-#define SSLEAY_PLATFORM		4
-#define SSLEAY_DIR		5
-
-/* Already declared in ossl_typ.h */
-#if 0
-typedef struct crypto_ex_data_st CRYPTO_EX_DATA;
-/* Called when a new object is created */
-typedef int CRYPTO_EX_new(void *parent, void *ptr, CRYPTO_EX_DATA *ad,
-					int idx, long argl, void *argp);
-/* Called when an object is free()ed */
-typedef void CRYPTO_EX_free(void *parent, void *ptr, CRYPTO_EX_DATA *ad,
-					int idx, long argl, void *argp);
-/* Called when we need to dup an object */
-typedef int CRYPTO_EX_dup(CRYPTO_EX_DATA *to, CRYPTO_EX_DATA *from, void *from_d, 
-					int idx, long argl, void *argp);
-#endif
-
-/* A generic structure to pass assorted data in a expandable way */
-typedef struct openssl_item_st
-	{
-	int code;
-	void *value;		/* Not used for flag attributes */
-	size_t value_size;	/* Max size of value for output, length for input */
-	size_t *value_length;	/* Returned length of value for output */
-	} OPENSSL_ITEM;
-
-
-/* When changing the CRYPTO_LOCK_* list, be sure to maintin the text lock
- * names in cryptlib.c
- */
-
-#define	CRYPTO_LOCK_ERR			1
-#define	CRYPTO_LOCK_EX_DATA		2
-#define	CRYPTO_LOCK_X509		3
-#define	CRYPTO_LOCK_X509_INFO		4
-#define	CRYPTO_LOCK_X509_PKEY		5
-#define CRYPTO_LOCK_X509_CRL		6
-#define CRYPTO_LOCK_X509_REQ		7
-#define CRYPTO_LOCK_DSA			8
-#define CRYPTO_LOCK_RSA			9
-#define CRYPTO_LOCK_EVP_PKEY		10
-#define CRYPTO_LOCK_X509_STORE		11
-#define CRYPTO_LOCK_SSL_CTX		12
-#define CRYPTO_LOCK_SSL_CERT		13
-#define CRYPTO_LOCK_SSL_SESSION		14
-#define CRYPTO_LOCK_SSL_SESS_CERT	15
-#define CRYPTO_LOCK_SSL			16
-#define CRYPTO_LOCK_SSL_METHOD		17
-#define CRYPTO_LOCK_RAND		18
-#define CRYPTO_LOCK_RAND2		19
-#define CRYPTO_LOCK_MALLOC		20
-#define CRYPTO_LOCK_BIO			21
-#define CRYPTO_LOCK_GETHOSTBYNAME	22
-#define CRYPTO_LOCK_GETSERVBYNAME	23
-#define CRYPTO_LOCK_READDIR		24
-#define CRYPTO_LOCK_RSA_BLINDING	25
-#define CRYPTO_LOCK_DH			26
-#define CRYPTO_LOCK_MALLOC2		27
-#define CRYPTO_LOCK_DSO			28
-#define CRYPTO_LOCK_DYNLOCK		29
-#define CRYPTO_LOCK_ENGINE		30
-#define CRYPTO_LOCK_UI			31
-#define CRYPTO_LOCK_ECDSA               32
-#define CRYPTO_LOCK_EC			33
-#define CRYPTO_LOCK_ECDH		34
-#define CRYPTO_LOCK_BN  		35
-#define CRYPTO_LOCK_EC_PRE_COMP		36
-#define CRYPTO_LOCK_STORE		37
-#define CRYPTO_LOCK_COMP		38
-#define CRYPTO_NUM_LOCKS		39
-
-#define CRYPTO_LOCK		1
-#define CRYPTO_UNLOCK		2
-#define CRYPTO_READ		4
-#define CRYPTO_WRITE		8
-
-#ifndef OPENSSL_NO_LOCKING
-#ifndef CRYPTO_w_lock
-#define CRYPTO_w_lock(type)	\
-	CRYPTO_lock(CRYPTO_LOCK|CRYPTO_WRITE,type,__FILE__,__LINE__)
-#define CRYPTO_w_unlock(type)	\
-	CRYPTO_lock(CRYPTO_UNLOCK|CRYPTO_WRITE,type,__FILE__,__LINE__)
-#define CRYPTO_r_lock(type)	\
-	CRYPTO_lock(CRYPTO_LOCK|CRYPTO_READ,type,__FILE__,__LINE__)
-#define CRYPTO_r_unlock(type)	\
-	CRYPTO_lock(CRYPTO_UNLOCK|CRYPTO_READ,type,__FILE__,__LINE__)
-#define CRYPTO_add(addr,amount,type)	\
-	CRYPTO_add_lock(addr,amount,type,__FILE__,__LINE__)
-#endif
-#else
-#define CRYPTO_w_lock(a)
-#define CRYPTO_w_unlock(a)
-#define CRYPTO_r_lock(a)
-#define CRYPTO_r_unlock(a)
-#define CRYPTO_add(a,b,c)	((*(a))+=(b))
-#endif
-
-/* Some applications as well as some parts of OpenSSL need to allocate
-   and deallocate locks in a dynamic fashion.  The following typedef
-   makes this possible in a type-safe manner.  */
-/* struct CRYPTO_dynlock_value has to be defined by the application. */
-typedef struct
-	{
-	int references;
-	struct CRYPTO_dynlock_value *data;
-	} CRYPTO_dynlock;
-
-
-/* The following can be used to detect memory leaks in the SSLeay library.
- * It used, it turns on malloc checking */
-
-#define CRYPTO_MEM_CHECK_OFF	0x0	/* an enume */
-#define CRYPTO_MEM_CHECK_ON	0x1	/* a bit */
-#define CRYPTO_MEM_CHECK_ENABLE	0x2	/* a bit */
-#define CRYPTO_MEM_CHECK_DISABLE 0x3	/* an enume */
-
-/* The following are bit values to turn on or off options connected to the
- * malloc checking functionality */
-
-/* Adds time to the memory checking information */
-#define V_CRYPTO_MDEBUG_TIME	0x1 /* a bit */
-/* Adds thread number to the memory checking information */
-#define V_CRYPTO_MDEBUG_THREAD	0x2 /* a bit */
-
-#define V_CRYPTO_MDEBUG_ALL (V_CRYPTO_MDEBUG_TIME | V_CRYPTO_MDEBUG_THREAD)
-
-
-/* predec of the BIO type */
-typedef struct bio_st BIO_dummy;
-
-struct crypto_ex_data_st
-	{
-	STACK *sk;
-	int dummy; /* gcc is screwing up this data structure :-( */
-	};
-
-/* This stuff is basically class callback functions
- * The current classes are SSL_CTX, SSL, SSL_SESSION, and a few more */
-
-typedef struct crypto_ex_data_func_st
-	{
-	long argl;	/* Arbitary long */
-	void *argp;	/* Arbitary void * */
-	CRYPTO_EX_new *new_func;
-	CRYPTO_EX_free *free_func;
-	CRYPTO_EX_dup *dup_func;
-	} CRYPTO_EX_DATA_FUNCS;
-
-DECLARE_STACK_OF(CRYPTO_EX_DATA_FUNCS)
-
-/* Per class, we have a STACK of CRYPTO_EX_DATA_FUNCS for each CRYPTO_EX_DATA
- * entry.
- */
-
-#define CRYPTO_EX_INDEX_BIO		0
-#define CRYPTO_EX_INDEX_SSL		1
-#define CRYPTO_EX_INDEX_SSL_CTX		2
-#define CRYPTO_EX_INDEX_SSL_SESSION	3
-#define CRYPTO_EX_INDEX_X509_STORE	4
-#define CRYPTO_EX_INDEX_X509_STORE_CTX	5
-#define CRYPTO_EX_INDEX_RSA		6
-#define CRYPTO_EX_INDEX_DSA		7
-#define CRYPTO_EX_INDEX_DH		8
-#define CRYPTO_EX_INDEX_ENGINE		9
-#define CRYPTO_EX_INDEX_X509		10
-#define CRYPTO_EX_INDEX_UI		11
-#define CRYPTO_EX_INDEX_ECDSA		12
-#define CRYPTO_EX_INDEX_ECDH		13
-#define CRYPTO_EX_INDEX_COMP		14
-#define CRYPTO_EX_INDEX_STORE		15
-
-/* Dynamically assigned indexes start from this value (don't use directly, use
- * via CRYPTO_ex_data_new_class). */
-#define CRYPTO_EX_INDEX_USER		100
-
-
-/* This is the default callbacks, but we can have others as well:
- * this is needed in Win32 where the application malloc and the
- * library malloc may not be the same.
- */
-#define CRYPTO_malloc_init()	CRYPTO_set_mem_functions(\
-	malloc, realloc, free)
-
-#if defined CRYPTO_MDEBUG_ALL || defined CRYPTO_MDEBUG_TIME || defined CRYPTO_MDEBUG_THREAD
-# ifndef CRYPTO_MDEBUG /* avoid duplicate #define */
-#  define CRYPTO_MDEBUG
-# endif
-#endif
-
-/* Set standard debugging functions (not done by default
- * unless CRYPTO_MDEBUG is defined) */
-#define CRYPTO_malloc_debug_init()	do {\
-	CRYPTO_set_mem_debug_functions(\
-		CRYPTO_dbg_malloc,\
-		CRYPTO_dbg_realloc,\
-		CRYPTO_dbg_free,\
-		CRYPTO_dbg_set_options,\
-		CRYPTO_dbg_get_options);\
-	} while(0)
-
-int CRYPTO_mem_ctrl(int mode);
-int CRYPTO_is_mem_check_on(void);
-
-/* for applications */
-#define MemCheck_start() CRYPTO_mem_ctrl(CRYPTO_MEM_CHECK_ON)
-#define MemCheck_stop()	CRYPTO_mem_ctrl(CRYPTO_MEM_CHECK_OFF)
-
-/* for library-internal use */
-#define MemCheck_on()	CRYPTO_mem_ctrl(CRYPTO_MEM_CHECK_ENABLE)
-#define MemCheck_off()	CRYPTO_mem_ctrl(CRYPTO_MEM_CHECK_DISABLE)
-#define is_MemCheck_on() CRYPTO_is_mem_check_on()
-
-#define OPENSSL_malloc(num)	CRYPTO_malloc((int)num,__FILE__,__LINE__)
-#define OPENSSL_realloc(addr,num) \
-	CRYPTO_realloc((char *)addr,(int)num,__FILE__,__LINE__)
-#define OPENSSL_realloc_clean(addr,old_num,num) \
-	CRYPTO_realloc_clean(addr,old_num,num,__FILE__,__LINE__)
-#define OPENSSL_remalloc(addr,num) \
-	CRYPTO_remalloc((char **)addr,(int)num,__FILE__,__LINE__)
-#define OPENSSL_freeFunc	CRYPTO_free
-#define OPENSSL_free(addr)	CRYPTO_free(addr)
-
-#define OPENSSL_malloc_locked(num) \
-	CRYPTO_malloc_locked((int)num,__FILE__,__LINE__)
-#define OPENSSL_free_locked(addr) CRYPTO_free_locked(addr)
-
-
-const char *SSLeay_version(int type);
-unsigned long SSLeay(void);
-
-int OPENSSL_issetugid(void);
-
-/* An opaque type representing an implementation of "ex_data" support */
-typedef struct st_CRYPTO_EX_DATA_IMPL	CRYPTO_EX_DATA_IMPL;
-/* Return an opaque pointer to the current "ex_data" implementation */
-const CRYPTO_EX_DATA_IMPL *CRYPTO_get_ex_data_implementation(void);
-/* Sets the "ex_data" implementation to be used (if it's not too late) */
-int CRYPTO_set_ex_data_implementation(const CRYPTO_EX_DATA_IMPL *i);
-/* Get a new "ex_data" class, and return the corresponding "class_index" */
-int CRYPTO_ex_data_new_class(void);
-/* Within a given class, get/register a new index */
-int CRYPTO_get_ex_new_index(int class_index, long argl, void *argp,
-		CRYPTO_EX_new *new_func, CRYPTO_EX_dup *dup_func,
-		CRYPTO_EX_free *free_func);
-/* Initialise/duplicate/free CRYPTO_EX_DATA variables corresponding to a given
- * class (invokes whatever per-class callbacks are applicable) */
-int CRYPTO_new_ex_data(int class_index, void *obj, CRYPTO_EX_DATA *ad);
-int CRYPTO_dup_ex_data(int class_index, CRYPTO_EX_DATA *to,
-		CRYPTO_EX_DATA *from);
-void CRYPTO_free_ex_data(int class_index, void *obj, CRYPTO_EX_DATA *ad);
-/* Get/set data in a CRYPTO_EX_DATA variable corresponding to a particular index
- * (relative to the class type involved) */
-int CRYPTO_set_ex_data(CRYPTO_EX_DATA *ad, int idx, void *val);
-void *CRYPTO_get_ex_data(const CRYPTO_EX_DATA *ad,int idx);
-/* This function cleans up all "ex_data" state. It mustn't be called under
- * potential race-conditions. */
-void CRYPTO_cleanup_all_ex_data(void);
-
-int CRYPTO_get_new_lockid(char *name);
-
-int CRYPTO_num_locks(void); /* return CRYPTO_NUM_LOCKS (shared libs!) */
-void CRYPTO_lock(int mode, int type,const char *file,int line);
-void CRYPTO_set_locking_callback(void (*func)(int mode,int type,
-					      const char *file,int line));
-void (*CRYPTO_get_locking_callback(void))(int mode,int type,const char *file,
-		int line);
-void CRYPTO_set_add_lock_callback(int (*func)(int *num,int mount,int type,
-					      const char *file, int line));
-int (*CRYPTO_get_add_lock_callback(void))(int *num,int mount,int type,
-					  const char *file,int line);
-void CRYPTO_set_id_callback(unsigned long (*func)(void));
-unsigned long (*CRYPTO_get_id_callback(void))(void);
-unsigned long CRYPTO_thread_id(void);
-const char *CRYPTO_get_lock_name(int type);
-int CRYPTO_add_lock(int *pointer,int amount,int type, const char *file,
-		    int line);
-
-int CRYPTO_get_new_dynlockid(void);
-void CRYPTO_destroy_dynlockid(int i);
-struct CRYPTO_dynlock_value *CRYPTO_get_dynlock_value(int i);
-void CRYPTO_set_dynlock_create_callback(struct CRYPTO_dynlock_value *(*dyn_create_function)(const char *file, int line));
-void CRYPTO_set_dynlock_lock_callback(void (*dyn_lock_function)(int mode, struct CRYPTO_dynlock_value *l, const char *file, int line));
-void CRYPTO_set_dynlock_destroy_callback(void (*dyn_destroy_function)(struct CRYPTO_dynlock_value *l, const char *file, int line));
-struct CRYPTO_dynlock_value *(*CRYPTO_get_dynlock_create_callback(void))(const char *file,int line);
-void (*CRYPTO_get_dynlock_lock_callback(void))(int mode, struct CRYPTO_dynlock_value *l, const char *file,int line);
-void (*CRYPTO_get_dynlock_destroy_callback(void))(struct CRYPTO_dynlock_value *l, const char *file,int line);
-
-/* CRYPTO_set_mem_functions includes CRYPTO_set_locked_mem_functions --
- * call the latter last if you need different functions */
-int CRYPTO_set_mem_functions(void *(*m)(size_t),void *(*r)(void *,size_t), void (*f)(void *));
-int CRYPTO_set_locked_mem_functions(void *(*m)(size_t), void (*free_func)(void *));
-int CRYPTO_set_mem_ex_functions(void *(*m)(size_t,const char *,int),
-                                void *(*r)(void *,size_t,const char *,int),
-                                void (*f)(void *));
-int CRYPTO_set_locked_mem_ex_functions(void *(*m)(size_t,const char *,int),
-                                       void (*free_func)(void *));
-int CRYPTO_set_mem_debug_functions(void (*m)(void *,int,const char *,int,int),
-				   void (*r)(void *,void *,int,const char *,int,int),
-				   void (*f)(void *,int),
-				   void (*so)(long),
-				   long (*go)(void));
-void CRYPTO_get_mem_functions(void *(**m)(size_t),void *(**r)(void *, size_t), void (**f)(void *));
-void CRYPTO_get_locked_mem_functions(void *(**m)(size_t), void (**f)(void *));
-void CRYPTO_get_mem_ex_functions(void *(**m)(size_t,const char *,int),
-                                 void *(**r)(void *, size_t,const char *,int),
-                                 void (**f)(void *));
-void CRYPTO_get_locked_mem_ex_functions(void *(**m)(size_t,const char *,int),
-                                        void (**f)(void *));
-void CRYPTO_get_mem_debug_functions(void (**m)(void *,int,const char *,int,int),
-				    void (**r)(void *,void *,int,const char *,int,int),
-				    void (**f)(void *,int),
-				    void (**so)(long),
-				    long (**go)(void));
-
-void *CRYPTO_malloc_locked(int num, const char *file, int line);
-void CRYPTO_free_locked(void *);
-void *CRYPTO_malloc(int num, const char *file, int line);
-void CRYPTO_free(void *);
-void *CRYPTO_realloc(void *addr,int num, const char *file, int line);
-void *CRYPTO_realloc_clean(void *addr,int old_num,int num,const char *file,
-			   int line);
-void *CRYPTO_remalloc(void *addr,int num, const char *file, int line);
-
-void OPENSSL_cleanse(void *ptr, size_t len);
-
-void CRYPTO_set_mem_debug_options(long bits);
-long CRYPTO_get_mem_debug_options(void);
-
-#define CRYPTO_push_info(info) \
-        CRYPTO_push_info_(info, __FILE__, __LINE__);
-int CRYPTO_push_info_(const char *info, const char *file, int line);
-int CRYPTO_pop_info(void);
-int CRYPTO_remove_all_info(void);
-
-
-/* Default debugging functions (enabled by CRYPTO_malloc_debug_init() macro;
- * used as default in CRYPTO_MDEBUG compilations): */
-/* The last argument has the following significance:
- *
- * 0:	called before the actual memory allocation has taken place
- * 1:	called after the actual memory allocation has taken place
- */
-void CRYPTO_dbg_malloc(void *addr,int num,const char *file,int line,int before_p);
-void CRYPTO_dbg_realloc(void *addr1,void *addr2,int num,const char *file,int line,int before_p);
-void CRYPTO_dbg_free(void *addr,int before_p);
-/* Tell the debugging code about options.  By default, the following values
- * apply:
- *
- * 0:                           Clear all options.
- * V_CRYPTO_MDEBUG_TIME (1):    Set the "Show Time" option.
- * V_CRYPTO_MDEBUG_THREAD (2):  Set the "Show Thread Number" option.
- * V_CRYPTO_MDEBUG_ALL (3):     1 + 2
- */
-void CRYPTO_dbg_set_options(long bits);
-long CRYPTO_dbg_get_options(void);
-
-
-#ifndef OPENSSL_NO_FP_API
-void CRYPTO_mem_leaks_fp(FILE *);
-#endif
-void CRYPTO_mem_leaks(struct bio_st *bio);
-/* unsigned long order, char *file, int line, int num_bytes, char *addr */
-typedef void *CRYPTO_MEM_LEAK_CB(unsigned long, const char *, int, int, void *);
-void CRYPTO_mem_leaks_cb(CRYPTO_MEM_LEAK_CB *cb);
-
-/* die if we have to */
-void OpenSSLDie(const char *file,int line,const char *assertion);
-#define OPENSSL_assert(e)       (void)((e) ? 0 : (OpenSSLDie(__FILE__, __LINE__, #e),1))
-
-unsigned long *OPENSSL_ia32cap_loc(void);
-#define OPENSSL_ia32cap (*(OPENSSL_ia32cap_loc()))
-
-/* BEGIN ERROR CODES */
-/* The following lines are auto generated by the script mkerr.pl. Any changes
- * made after this point may be overwritten when the script is next run.
- */
-void ERR_load_CRYPTO_strings(void);
-
-/* Error codes for the CRYPTO functions. */
-
-/* Function codes. */
-#define CRYPTO_F_CRYPTO_GET_EX_NEW_INDEX		 100
-#define CRYPTO_F_CRYPTO_GET_NEW_DYNLOCKID		 103
-#define CRYPTO_F_CRYPTO_GET_NEW_LOCKID			 101
-#define CRYPTO_F_CRYPTO_SET_EX_DATA			 102
-#define CRYPTO_F_DEF_ADD_INDEX				 104
-#define CRYPTO_F_DEF_GET_CLASS				 105
-#define CRYPTO_F_INT_DUP_EX_DATA			 106
-#define CRYPTO_F_INT_FREE_EX_DATA			 107
-#define CRYPTO_F_INT_NEW_EX_DATA			 108
-
-/* Reason codes. */
-#define CRYPTO_R_NO_DYNLOCK_CREATE_CALLBACK		 100
-
-#ifdef  __cplusplus
-}
-#endif
-#endif
diff --git a/crypto/openssl/crypto/cversion.c b/crypto/openssl/crypto/cversion.c
deleted file mode 100644
index ea9f25fd1666..000000000000
--- a/crypto/openssl/crypto/cversion.c
+++ /dev/null
@@ -1,117 +0,0 @@
-/* crypto/cversion.c */
-/* Copyright (C) 1995-1998 Eric Young (eay@cryptsoft.com)
- * All rights reserved.
- *
- * This package is an SSL implementation written
- * by Eric Young (eay@cryptsoft.com).
- * The implementation was written so as to conform with Netscapes SSL.
- * 
- * This library is free for commercial and non-commercial use as long as
- * the following conditions are aheared to.  The following conditions
- * apply to all code found in this distribution, be it the RC4, RSA,
- * lhash, DES, etc., code; not just the SSL code.  The SSL documentation
- * included with this distribution is covered by the same copyright terms
- * except that the holder is Tim Hudson (tjh@cryptsoft.com).
- * 
- * Copyright remains Eric Young's, and as such any Copyright notices in
- * the code are not to be removed.
- * If this package is used in a product, Eric Young should be given attribution
- * as the author of the parts of the library used.
- * This can be in the form of a textual message at program startup or
- * in documentation (online or textual) provided with the package.
- * 
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions
- * are met:
- * 1. Redistributions of source code must retain the copyright
- *    notice, this list of conditions and the following disclaimer.
- * 2. Redistributions in binary form must reproduce the above copyright
- *    notice, this list of conditions and the following disclaimer in the
- *    documentation and/or other materials provided with the distribution.
- * 3. All advertising materials mentioning features or use of this software
- *    must display the following acknowledgement:
- *    "This product includes cryptographic software written by
- *     Eric Young (eay@cryptsoft.com)"
- *    The word 'cryptographic' can be left out if the rouines from the library
- *    being used are not cryptographic related :-).
- * 4. If you include any Windows specific code (or a derivative thereof) from 
- *    the apps directory (application code) you must include an acknowledgement:
- *    "This product includes software written by Tim Hudson (tjh@cryptsoft.com)"
- * 
- * THIS SOFTWARE IS PROVIDED BY ERIC YOUNG ``AS IS'' AND
- * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
- * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
- * ARE DISCLAIMED.  IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE
- * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
- * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
- * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
- * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
- * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
- * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
- * SUCH DAMAGE.
- * 
- * The licence and distribution terms for any publically available version or
- * derivative of this code cannot be changed.  i.e. this code cannot simply be
- * copied and put under another distribution licence
- * [including the GNU Public Licence.]
- */
-
-#include "cryptlib.h"
-
-#ifndef NO_WINDOWS_BRAINDEATH
-#include "buildinf.h"
-#endif
-
-const char *SSLeay_version(int t)
-	{
-	if (t == SSLEAY_VERSION)
-		return OPENSSL_VERSION_TEXT;
-	if (t == SSLEAY_BUILT_ON)
-		{
-#ifdef DATE
-		static char buf[sizeof(DATE)+11];
-
-		BIO_snprintf(buf,sizeof buf,"built on: %s",DATE);
-		return(buf);
-#else
-		return("built on: date not available");
-#endif
-		}
-	if (t == SSLEAY_CFLAGS)
-		{
-#ifdef CFLAGS
-		static char buf[sizeof(CFLAGS)+11];
-
-		BIO_snprintf(buf,sizeof buf,"compiler: %s",CFLAGS);
-		return(buf);
-#else
-		return("compiler: information not available");
-#endif
-		}
-	if (t == SSLEAY_PLATFORM)
-		{
-#ifdef PLATFORM
-		static char buf[sizeof(PLATFORM)+11];
-
-		BIO_snprintf(buf,sizeof buf,"platform: %s", PLATFORM);
-		return(buf);
-#else
-		return("platform: information not available");
-#endif
-		}
-	if (t == SSLEAY_DIR)
-		{
-#ifdef OPENSSLDIR
-		return "OPENSSLDIR: \"" OPENSSLDIR "\"";
-#else
-		return "OPENSSLDIR: N/A";
-#endif
-		}
-	return("not available");
-	}
-
-unsigned long SSLeay(void)
-	{
-	return(SSLEAY_VERSION_NUMBER);
-	}
-
diff --git a/crypto/openssl/crypto/des/COPYRIGHT b/crypto/openssl/crypto/des/COPYRIGHT
deleted file mode 100644
index 5469e1e46996..000000000000
--- a/crypto/openssl/crypto/des/COPYRIGHT
+++ /dev/null
@@ -1,50 +0,0 @@
-Copyright (C) 1995-1997 Eric Young (eay@cryptsoft.com)
-All rights reserved.
-
-This package is an DES implementation written by Eric Young (eay@cryptsoft.com).
-The implementation was written so as to conform with MIT's libdes.
-
-This library is free for commercial and non-commercial use as long as
-the following conditions are aheared to.  The following conditions
-apply to all code found in this distribution.
-
-Copyright remains Eric Young's, and as such any Copyright notices in
-the code are not to be removed.
-If this package is used in a product, Eric Young should be given attribution
-as the author of that the SSL library.  This can be in the form of a textual
-message at program startup or in documentation (online or textual) provided
-with the package.
-
-Redistribution and use in source and binary forms, with or without
-modification, are permitted provided that the following conditions
-are met:
-1. Redistributions of source code must retain the copyright
-   notice, this list of conditions and the following disclaimer.
-2. Redistributions in binary form must reproduce the above copyright
-   notice, this list of conditions and the following disclaimer in the
-   documentation and/or other materials provided with the distribution.
-3. All advertising materials mentioning features or use of this software
-   must display the following acknowledgement:
-   This product includes software developed by Eric Young (eay@cryptsoft.com)
-
-THIS SOFTWARE IS PROVIDED BY ERIC YOUNG ``AS IS'' AND
-ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
-IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
-ARE DISCLAIMED.  IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE
-FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
-DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
-OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
-HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
-LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
-OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
-SUCH DAMAGE.
-
-The license and distribution terms for any publically available version or
-derivative of this code cannot be changed.  i.e. this code cannot simply be
-copied and put under another distrubution license
-[including the GNU Public License.]
-
-The reason behind this being stated in this direct manner is past
-experience in code simply being copied and the attribution removed
-from it and then being distributed as part of other packages. This
-implementation was a non-trivial and unpaid effort.
diff --git a/crypto/openssl/crypto/des/DES.pm b/crypto/openssl/crypto/des/DES.pm
deleted file mode 100644
index 6a175b6ca4b0..000000000000
--- a/crypto/openssl/crypto/des/DES.pm
+++ /dev/null
@@ -1,19 +0,0 @@
-package DES;
-
-require Exporter;
-require DynaLoader;
-@ISA = qw(Exporter DynaLoader);
-# Items to export into callers namespace by default
-# (move infrequently used names to @EXPORT_OK below)
-@EXPORT = qw(
-);
-# Other items we are prepared to export if requested
-@EXPORT_OK = qw(
-crypt
-);
-
-# Preloaded methods go here.  Autoload methods go after __END__, and are
-# processed by the autosplit program.
-bootstrap DES;
-1;
-__END__
diff --git a/crypto/openssl/crypto/des/DES.xs b/crypto/openssl/crypto/des/DES.xs
deleted file mode 100644
index b8050b9edf8d..000000000000
--- a/crypto/openssl/crypto/des/DES.xs
+++ /dev/null
@@ -1,268 +0,0 @@
-#include "EXTERN.h"
-#include "perl.h"
-#include "XSUB.h"
-#include "des.h"
-
-#define deschar	char
-static STRLEN len;
-
-static int
-not_here(s)
-char *s;
-{
-    croak("%s not implemented on this architecture", s);
-    return -1;
-}
-
-MODULE = DES	PACKAGE = DES	PREFIX = des_
-
-char *
-des_crypt(buf,salt)
-	char *	buf
-	char *	salt
-
-void
-des_set_odd_parity(key)
-	des_cblock *	key
-PPCODE:
-	{
-	SV *s;
-
-	s=sv_newmortal();
-	sv_setpvn(s,(char *)key,8);
-	des_set_odd_parity((des_cblock *)SvPV(s,na));
-	PUSHs(s);
-	}
-
-int
-des_is_weak_key(key)
-	des_cblock *	key
-
-des_key_schedule
-des_set_key(key)
-	des_cblock *	key
-CODE:
-	des_set_key(key,RETVAL);
-OUTPUT:
-RETVAL
-
-des_cblock
-des_ecb_encrypt(input,ks,encrypt)
-	des_cblock *	input
-	des_key_schedule *	ks
-	int	encrypt
-CODE:
-	des_ecb_encrypt(input,&RETVAL,*ks,encrypt);
-OUTPUT:
-RETVAL
-
-void
-des_cbc_encrypt(input,ks,ivec,encrypt)
-	char *	input
-	des_key_schedule *	ks
-	des_cblock *	ivec
-	int	encrypt
-PPCODE:
-	{
-	SV *s;
-	STRLEN len,l;
-	char *c;
-
-	l=SvCUR(ST(0));
-	len=((((unsigned long)l)+7)/8)*8;
-	s=sv_newmortal();
-	sv_setpvn(s,"",0);
-	SvGROW(s,len);
-	SvCUR_set(s,len);
-	c=(char *)SvPV(s,na);
-	des_cbc_encrypt((des_cblock *)input,(des_cblock *)c,
-		l,*ks,ivec,encrypt);
-	sv_setpvn(ST(2),(char *)c[len-8],8);
-	PUSHs(s);
-	}
-
-void
-des_cbc3_encrypt(input,ks1,ks2,ivec1,ivec2,encrypt)
-	char *	input
-	des_key_schedule *	ks1
-	des_key_schedule *	ks2
-	des_cblock *	ivec1
-	des_cblock *	ivec2
-	int	encrypt
-PPCODE:
-	{
-	SV *s;
-	STRLEN len,l;
-
-	l=SvCUR(ST(0));
-	len=((((unsigned long)l)+7)/8)*8;
-	s=sv_newmortal();
-	sv_setpvn(s,"",0);
-	SvGROW(s,len);
-	SvCUR_set(s,len);
-	des_3cbc_encrypt((des_cblock *)input,(des_cblock *)SvPV(s,na),
-		l,*ks1,*ks2,ivec1,ivec2,encrypt);
-	sv_setpvn(ST(3),(char *)ivec1,8);
-	sv_setpvn(ST(4),(char *)ivec2,8);
-	PUSHs(s);
-	}
-
-void
-des_cbc_cksum(input,ks,ivec)
-	char *	input
-	des_key_schedule *	ks
-	des_cblock *	ivec
-PPCODE:
-	{
-	SV *s1,*s2;
-	STRLEN len,l;
-	des_cblock c;
-	unsigned long i1,i2;
-
-	s1=sv_newmortal();
-	s2=sv_newmortal();
-	l=SvCUR(ST(0));
-	des_cbc_cksum((des_cblock *)input,(des_cblock *)c,
-		l,*ks,ivec);
-	i1=c[4]|(c[5]<<8)|(c[6]<<16)|(c[7]<<24);
-	i2=c[0]|(c[1]<<8)|(c[2]<<16)|(c[3]<<24);
-	sv_setiv(s1,i1);
-	sv_setiv(s2,i2);
-	sv_setpvn(ST(2),(char *)c,8);
-	PUSHs(s1);
-	PUSHs(s2);
-	}
-
-void
-des_cfb_encrypt(input,numbits,ks,ivec,encrypt)
-	char *	input
-	int	numbits
-	des_key_schedule *	ks
-	des_cblock *	ivec
-	int	encrypt
-PPCODE:
-	{
-	SV *s;
-	STRLEN len;
-	char *c;
-
-	len=SvCUR(ST(0));
-	s=sv_newmortal();
-	sv_setpvn(s,"",0);
-	SvGROW(s,len);
-	SvCUR_set(s,len);
-	c=(char *)SvPV(s,na);
-	des_cfb_encrypt((unsigned char *)input,(unsigned char *)c,
-		(int)numbits,(long)len,*ks,ivec,encrypt);
-	sv_setpvn(ST(3),(char *)ivec,8);
-	PUSHs(s);
-	}
-
-des_cblock *
-des_ecb3_encrypt(input,ks1,ks2,encrypt)
-	des_cblock *	input
-	des_key_schedule *	ks1
-	des_key_schedule *	ks2
-	int	encrypt
-CODE:
-	{
-	des_cblock c;
-
-	des_ecb3_encrypt((des_cblock *)input,(des_cblock *)&c,
-		*ks1,*ks2,encrypt);
-	RETVAL= &c;
-	}
-OUTPUT:
-RETVAL
-
-void
-des_ofb_encrypt(input,numbits,ks,ivec)
-	unsigned char *	input
-	int	numbits
-	des_key_schedule *	ks
-	des_cblock *	ivec
-PPCODE:
-	{
-	SV *s;
-	STRLEN len,l;
-	unsigned char *c;
-
-	len=SvCUR(ST(0));
-	s=sv_newmortal();
-	sv_setpvn(s,"",0);
-	SvGROW(s,len);
-	SvCUR_set(s,len);
-	c=(unsigned char *)SvPV(s,na);
-	des_ofb_encrypt((unsigned char *)input,(unsigned char *)c,
-		numbits,len,*ks,ivec);
-	sv_setpvn(ST(3),(char *)ivec,8);
-	PUSHs(s);
-	}
-
-void
-des_pcbc_encrypt(input,ks,ivec,encrypt)
-	char *	input
-	des_key_schedule *	ks
-	des_cblock *	ivec
-	int	encrypt
-PPCODE:
-	{
-	SV *s;
-	STRLEN len,l;
-	char *c;
-
-	l=SvCUR(ST(0));
-	len=((((unsigned long)l)+7)/8)*8;
-	s=sv_newmortal();
-	sv_setpvn(s,"",0);
-	SvGROW(s,len);
-	SvCUR_set(s,len);
-	c=(char *)SvPV(s,na);
-	des_pcbc_encrypt((des_cblock *)input,(des_cblock *)c,
-		l,*ks,ivec,encrypt);
-	sv_setpvn(ST(2),(char *)c[len-8],8);
-	PUSHs(s);
-	}
-
-des_cblock *
-des_random_key()
-CODE:
-	{
-	des_cblock c;
-
-	des_random_key(c);
-	RETVAL=&c;
-	}
-OUTPUT:
-RETVAL
-
-des_cblock *
-des_string_to_key(str)
-char *	str
-CODE:
-	{
-	des_cblock c;
-
-	des_string_to_key(str,&c);
-	RETVAL=&c;
-	}
-OUTPUT:
-RETVAL
-
-void
-des_string_to_2keys(str)
-char *	str
-PPCODE:
-	{
-	des_cblock c1,c2;
-	SV *s1,*s2;
-
-	des_string_to_2keys(str,&c1,&c2);
-	EXTEND(sp,2);
-	s1=sv_newmortal();
-	sv_setpvn(s1,(char *)c1,8);
-	s2=sv_newmortal();
-	sv_setpvn(s2,(char *)c2,8);
-	PUSHs(s1);
-	PUSHs(s2);
-	}
diff --git a/crypto/openssl/crypto/des/FILES0 b/crypto/openssl/crypto/des/FILES0
deleted file mode 100644
index 4c7ea2de7a06..000000000000
--- a/crypto/openssl/crypto/des/FILES0
+++ /dev/null
@@ -1,96 +0,0 @@
-/* General stuff */
-COPYRIGHT	- Copyright info.
-MODES.DES	- A description of the features of the different modes of DES.
-FILES		- This file.
-INSTALL		- How to make things compile.
-Imakefile	- For use with kerberos.
-README		- What this package is.
-VERSION		- Which version this is and what was changed.
-KERBEROS	- Kerberos version 4 notes.
-Makefile.PL	- An old makefile to build with perl5, not current.
-Makefile.ssl	- The SSLeay makefile
-Makefile.uni	- The normal unix makefile.
-GNUmakefile	- The makefile for use with glibc.
-makefile.bc	- A Borland C makefile
-times		- Some outputs from 'speed' on some machines.
-vms.com		- For use when compiling under VMS
-
-/* My SunOS des(1) replacement */
-des.c		- des(1) source code.
-des.man		- des(1) manual.
-
-/* Testing and timing programs. */
-destest.c	- Source for libdes.a test program.
-speed.c		- Source for libdes.a timing program.
-rpw.c		- Source for libdes.a testing password reading routines.
-
-/* libdes.a source code */
-des_crypt.man	- libdes.a manual page.
-des.h		- Public libdes.a header file.
-ecb_enc.c	- des_ecb_encrypt() source, this contains the basic DES code.
-ecb3_enc.c	- des_ecb3_encrypt() source.
-cbc_ckm.c	- des_cbc_cksum() source.
-cbc_enc.c	- des_cbc_encrypt() source.
-ncbc_enc.c	- des_cbc_encrypt() that is 'normal' in that it copies
-		  the new iv values back in the passed iv vector.
-ede_enc.c	- des_ede3_cbc_encrypt() cbc mode des using triple DES.
-cbc3_enc.c	- des_3cbc_encrypt() source, don't use this function.
-cfb_enc.c	- des_cfb_encrypt() source.
-cfb64enc.c	- des_cfb64_encrypt() cfb in 64 bit mode but setup to be
-		  used as a stream cipher.
-cfb64ede.c	- des_ede3_cfb64_encrypt() cfb in 64 bit mode but setup to be
-		  used as a stream cipher and using triple DES.
-ofb_enc.c	- des_cfb_encrypt() source.
-ofb64_enc.c	- des_ofb_encrypt() ofb in 64 bit mode but setup to be
-		  used as a stream cipher.
-ofb64ede.c	- des_ede3_ofb64_encrypt() ofb in 64 bit mode but setup to be
-		  used as a stream cipher and using triple DES.
-enc_read.c	- des_enc_read() source.
-enc_writ.c	- des_enc_write() source.
-pcbc_enc.c	- des_pcbc_encrypt() source.
-qud_cksm.c	- quad_cksum() source.
-rand_key.c	- des_random_key() source.
-read_pwd.c	- Source for des_read_password() plus related functions.
-set_key.c	- Source for des_set_key().
-str2key.c	- Covert a string of any length into a key.
-fcrypt.c	- A small, fast version of crypt(3).
-des_locl.h	- Internal libdes.a header file.
-podd.h		- Odd parity tables - used in des_set_key().
-sk.h		- Lookup tables used in des_set_key().
-spr.h		- What is left of the S tables - used in ecb_encrypt().
-des_ver.h	- header file for the external definition of the
-		  version string.
-des.doc		- SSLeay documentation for the library.
-
-/* The perl scripts - you can ignore these files they are only
- * included for the curious */
-des.pl		- des in perl anyone? des_set_key and des_ecb_encrypt
-		  both done in a perl library.
-testdes.pl	- Testing program for des.pl
-doIP		- Perl script used to develop IP xor/shift code.
-doPC1		- Perl script used to develop PC1 xor/shift code.
-doPC2		- Generates sk.h.
-PC1		- Output of doPC1 should be the same as output from PC1.
-PC2		- used in development of doPC2.
-shifts.pl	- Perl library used by my perl scripts.
-
-/* I started making a perl5 dynamic library for libdes
- * but did not fully finish, these files are part of that effort. */
-DES.pm
-DES.pod
-DES.xs
-t
-typemap
-
-/* The following are for use with sun RPC implementaions. */
-rpc_des.h
-rpc_enc.c
-
-/* The following are contibuted by Mark Murray <mark@grondar.za>.  They
- * are not normally built into libdes due to machine specific routines
- * contained in them.  They are for use in the most recent incarnation of
- * export kerberos v 4 (eBones). */
-supp.c
-new_rkey.c
-
-
diff --git a/crypto/openssl/crypto/des/INSTALL b/crypto/openssl/crypto/des/INSTALL
deleted file mode 100644
index 8aebdfe1100c..000000000000
--- a/crypto/openssl/crypto/des/INSTALL
+++ /dev/null
@@ -1,69 +0,0 @@
-Check the CC and CFLAGS lines in the makefile
-
-If your C library does not support the times(3) function, change the
-#define TIMES to
-#undef TIMES in speed.c
-If it does, check the HZ value for the times(3) function.
-If your system does not define CLK_TCK it will be assumed to
-be 100.0.
-
-If possible use gcc v 2.7.?
-Turn on the maximum optimising (normally '-O3 -fomit-frame-pointer' for gcc)
-In recent times, some system compilers give better performace.
-
-type 'make'
-
-run './destest' to check things are ok.
-run './rpw' to check the tty code for reading passwords works.
-run './speed' to see how fast those optimisations make the library run :-)
-run './des_opts' to determin the best compile time options.
-
-The output from des_opts should be put in the makefile options and des_enc.c
-should be rebuilt.  For 64 bit computers, do not use the DES_PTR option.
-For the DEC Alpha, edit des.h and change DES_LONG to 'unsigned int'
-and then you can use the 'DES_PTR' option.
-
-The file options.txt has the options listed for best speed on quite a
-few systems.  Look and the options (UNROLL, PTR, RISC2 etc) and then
-turn on the relevant option in the Makefile.
-
-There are some special Makefile targets that make life easier.
-make cc		- standard cc build
-make gcc	- standard gcc build
-make x86-elf	- x86 assembler (elf), linux-elf.
-make x86-out	- x86 assembler (a.out), FreeBSD
-make x86-solaris- x86 assembler
-make x86-bsdi	- x86 assembler (a.out with primative assembler).
-
-If at all possible use the assembler (for Windows NT/95, use
-asm/win32.obj to link with).  The x86 assembler is very very fast.
-
-A make install will by default install
-libdes.a      in /usr/local/lib/libdes.a
-des           in /usr/local/bin/des
-des_crypt.man in /usr/local/man/man3/des_crypt.3
-des.man       in /usr/local/man/man1/des.1
-des.h         in /usr/include/des.h
-
-des(1) should be compatible with sunOS's but I have been unable to
-test it.
-
-These routines should compile on MSDOS, most 32bit and 64bit version
-of Unix (BSD and SYSV) and VMS, without modification.
-The only problems should be #include files that are in the wrong places.
-
-These routines can be compiled under MSDOS.
-I have successfully encrypted files using des(1) under MSDOS and then
-decrypted the files on a SparcStation.
-I have been able to compile and test the routines with
-Microsoft C v 5.1 and Turbo C v 2.0.
-The code in this library is in no way optimised for the 16bit
-operation of MSDOS.
-
-When building for glibc, ignore all of the above and just unpack into
-glibc-1.??/des and then gmake as per normal.
-
-As a final note on performace.  Certain CPUs like sparcs and Alpha often give
-a %10 speed difference depending on the link order.  It is rather anoying
-when one program reports 'x' DES encrypts a second and another reports
-'x*0.9' the speed.
diff --git a/crypto/openssl/crypto/des/Imakefile b/crypto/openssl/crypto/des/Imakefile
deleted file mode 100644
index 1b9b5629e15d..000000000000
--- a/crypto/openssl/crypto/des/Imakefile
+++ /dev/null
@@ -1,35 +0,0 @@
-# This Imakefile has not been tested for a while but it should still
-# work when placed in the correct directory in the kerberos v 4 distribution
-
-SRCS=   cbc_cksm.c cbc_enc.c ecb_enc.c pcbc_enc.c \
-        qud_cksm.c rand_key.c read_pwd.c set_key.c str2key.c \
-        enc_read.c enc_writ.c fcrypt.c cfb_enc.c \
-	ecb3_enc.c ofb_enc.c ofb64enc.c
-
-OBJS=   cbc_cksm.o cbc_enc.o ecb_enc.o pcbc_enc.o \
-	qud_cksm.o rand_key.o read_pwd.o set_key.o str2key.o \
-	enc_read.o enc_writ.o fcrypt.o cfb_enc.o \
-	ecb3_enc.o ofb_enc.o ofb64enc.o
-
-GENERAL=COPYRIGHT FILES INSTALL Imakefile README VERSION makefile times \
-	vms.com KERBEROS
-DES=    des.c des.man
-TESTING=destest.c speed.c rpw.c
-LIBDES= des_crypt.man des.h des_locl.h podd.h sk.h spr.h
-
-PERL=   des.pl testdes.pl doIP doPC1 doPC2 PC1 PC2 shifts.pl
-
-CODE=    $(GENERAL) $(DES) $(TESTING) $(SRCS) $(LIBDES) $(PERL)
-
-SRCDIR=$(SRCTOP)/lib/des
-
-DBG= -O
-INCLUDE= -I$(SRCDIR)
-CC= cc
-
-library_obj_rule()
-
-install_library_target(des,$(OBJS),$(SRCS),)
-
-test(destest,libdes.a,)
-test(rpw,libdes.a,)
diff --git a/crypto/openssl/crypto/des/KERBEROS b/crypto/openssl/crypto/des/KERBEROS
deleted file mode 100644
index f401b10014ff..000000000000
--- a/crypto/openssl/crypto/des/KERBEROS
+++ /dev/null
@@ -1,41 +0,0 @@
- [ This is an old file, I don't know if it is true anymore
-   but I will leave the file here - eay 21/11/95 ]
-
-To use this library with Bones (kerberos without DES):
-1) Get my modified Bones - eBones.  It can be found on
-   gondwana.ecr.mu.oz.au (128.250.1.63) /pub/athena/eBones-p9.tar.Z
-   and
-   nic.funet.fi (128.214.6.100) /pub/unix/security/Kerberos/eBones-p9.tar.Z
-
-2) Unpack this library in src/lib/des, makeing sure it is version
-   3.00 or greater (libdes.tar.93-10-07.Z).  This versions differences
-   from the version in comp.sources.misc volume 29 patchlevel2.
-   The primarily difference is that it should compile under kerberos :-).
-   It can be found at.
-   ftp.psy.uq.oz.au (130.102.32.1) /pub/DES/libdes.tar.93-10-07.Z
-
-Now do a normal kerberos build and things should work.
-
-One problem I found when I was build on my local sun.
----
-For sunOS 4.1.1 apply the following patch to src/util/ss/make_commands.c
-
-*** make_commands.c.orig	Fri Jul  3 04:18:35 1987
---- make_commands.c	Wed May 20 08:47:42 1992
-***************
-*** 98,104 ****
-       if (!rename(o_file, z_file)) {
-  	  if (!vfork()) {
-  	       chdir("/tmp");
-! 	       execl("/bin/ld", "ld", "-o", o_file+5, "-s", "-r", "-n",
-  		     z_file+5, 0);
-  	       perror("/bin/ld");
-  	       _exit(1);
---- 98,104 ----
-       if (!rename(o_file, z_file)) {
-  	  if (!vfork()) {
-  	       chdir("/tmp");
-! 	       execl("/bin/ld", "ld", "-o", o_file+5, "-s", "-r",
-  		     z_file+5, 0);
-  	       perror("/bin/ld");
-  	       _exit(1);
diff --git a/crypto/openssl/crypto/des/Makefile b/crypto/openssl/crypto/des/Makefile
deleted file mode 100644
index 523dfe38f27c..000000000000
--- a/crypto/openssl/crypto/des/Makefile
+++ /dev/null
@@ -1,292 +0,0 @@
-#
-# OpenSSL/crypto/des/Makefile
-#
-
-DIR=	des
-TOP=	../..
-CC=	cc
-CPP=	$(CC) -E
-INCLUDES=-I$(TOP) -I../../include
-CFLAG=-g
-MAKEFILE=	Makefile
-AR=		ar r
-RANLIB=		ranlib
-DES_ENC=	des_enc.o fcrypt_b.o
-# or use
-#DES_ENC=	dx86-elf.o yx86-elf.o
-
-CFLAGS= $(INCLUDES) $(CFLAG)
-ASFLAGS= $(INCLUDES) $(ASFLAG)
-AFLAGS= $(ASFLAGS)
-
-GENERAL=Makefile
-TEST=destest.c
-APPS=
-
-LIB=$(TOP)/libcrypto.a
-LIBSRC=	cbc_cksm.c cbc_enc.c  cfb64enc.c cfb_enc.c  \
-	ecb3_enc.c ecb_enc.c  enc_read.c enc_writ.c \
-	fcrypt.c ofb64enc.c ofb_enc.c  pcbc_enc.c \
-	qud_cksm.c rand_key.c rpc_enc.c  set_key.c  \
-	des_enc.c fcrypt_b.c \
-	xcbc_enc.c \
-	str2key.c  cfb64ede.c ofb64ede.c ede_cbcm_enc.c des_old.c des_old2.c \
-	read2pwd.c
-
-LIBOBJ= set_key.o  ecb_enc.o  cbc_enc.o \
-	ecb3_enc.o cfb64enc.o cfb64ede.o cfb_enc.o  ofb64ede.o \
-	enc_read.o enc_writ.o ofb64enc.o \
-	ofb_enc.o  str2key.o  pcbc_enc.o qud_cksm.o rand_key.o \
-	${DES_ENC} \
-	fcrypt.o xcbc_enc.o rpc_enc.o  cbc_cksm.o \
-	ede_cbcm_enc.o des_old.o des_old2.o read2pwd.o
-
-SRC= $(LIBSRC)
-
-EXHEADER= des.h des_old.h
-HEADER=	des_locl.h rpc_des.h spr.h des_ver.h $(EXHEADER)
-
-ALL=    $(GENERAL) $(SRC) $(HEADER)
-
-top:
-	(cd ../..; $(MAKE) DIRS=crypto SDIRS=$(DIR) sub_all)
-
-all:	lib
-
-lib:	$(LIBOBJ)
-	$(AR) $(LIB) $(LIBOBJ)
-	$(RANLIB) $(LIB) || echo Never mind.
-	@touch lib
-
-des: des.o cbc3_enc.o lib
-	$(CC) $(CFLAGS) -o des des.o cbc3_enc.o $(LIB)
-
-des_enc-sparc.S:	asm/des_enc.m4
-	m4 -B 8192 asm/des_enc.m4 > des_enc-sparc.S
-
-# ELF
-dx86-elf.s:	asm/des-586.pl ../perlasm/x86asm.pl ../perlasm/cbc.pl
-	(cd asm; $(PERL) des-586.pl elf $(CFLAGS) > ../$@)
-yx86-elf.s:	asm/crypt586.pl ../perlasm/x86asm.pl ../perlasm/cbc.pl
-	(cd asm; $(PERL) crypt586.pl elf $(CFLAGS) > ../$@)
-# COFF
-dx86-cof.s: asm/des-586.pl ../perlasm/x86asm.pl ../perlasm/cbc.pl
-	(cd asm; $(PERL) des-586.pl coff $(CFLAGS) > ../$@)
-yx86-cof.s: asm/crypt586.pl ../perlasm/x86asm.pl ../perlasm/cbc.pl
-	(cd asm; $(PERL) crypt586.pl coff $(CFLAGS) > ../$@)
-# a.out
-dx86-out.s: asm/des-586.pl ../perlasm/x86asm.pl ../perlasm/cbc.pl
-	(cd asm; $(PERL) des-586.pl a.out $(CFLAGS) > ../$@)
-yx86-out.s: asm/crypt586.pl ../perlasm/x86asm.pl ../perlasm/cbc.pl
-	(cd asm; $(PERL) crypt586.pl a.out $(CFLAGS) > ../$@)
-
-files:
-	$(PERL) $(TOP)/util/files.pl Makefile >> $(TOP)/MINFO
-
-links:
-	@$(PERL) $(TOP)/util/mklink.pl ../../include/openssl $(EXHEADER)
-	@$(PERL) $(TOP)/util/mklink.pl ../../test $(TEST)
-	@$(PERL) $(TOP)/util/mklink.pl ../../apps $(APPS)
-
-# We need to use force because 'install' matches 'INSTALL' on case
-# insensitive systems
-FRC.install:
-install: FRC.install
-	@[ -n "$(INSTALLTOP)" ] # should be set by top Makefile...
-	@headerlist="$(EXHEADER)"; for i in $$headerlist ; \
-	do  \
-	(cp $$i $(INSTALL_PREFIX)$(INSTALLTOP)/include/openssl/$$i; \
-	chmod 644 $(INSTALL_PREFIX)$(INSTALLTOP)/include/openssl/$$i ); \
-	done;
-
-tags:
-	ctags $(SRC)
-
-tests:
-
-lint:
-	lint -DLINT $(INCLUDES) $(SRC)>fluff
-
-depend:
-	@[ -n "$(MAKEDEPEND)" ] # should be set by upper Makefile...
-	$(MAKEDEPEND) -- $(CFLAG) $(INCLUDES) $(DEPFLAG) -- $(PROGS) $(LIBSRC)
-
-dclean:
-	$(PERL) -pe 'if (/^# DO NOT DELETE THIS LINE/) {print; exit(0);}' $(MAKEFILE) >Makefile.new
-	mv -f Makefile.new $(MAKEFILE)
-
-clean:
-	rm -f *.s *.o *.obj des lib tags core .pure .nfs* *.old *.bak fluff
-
-# DO NOT DELETE THIS LINE -- make depend depends on it.
-
-cbc_cksm.o: ../../include/openssl/des.h ../../include/openssl/des_old.h
-cbc_cksm.o: ../../include/openssl/e_os2.h ../../include/openssl/opensslconf.h
-cbc_cksm.o: ../../include/openssl/ossl_typ.h ../../include/openssl/safestack.h
-cbc_cksm.o: ../../include/openssl/stack.h ../../include/openssl/symhacks.h
-cbc_cksm.o: ../../include/openssl/ui.h ../../include/openssl/ui_compat.h
-cbc_cksm.o: cbc_cksm.c des_locl.h
-cbc_enc.o: ../../include/openssl/des.h ../../include/openssl/des_old.h
-cbc_enc.o: ../../include/openssl/e_os2.h ../../include/openssl/opensslconf.h
-cbc_enc.o: ../../include/openssl/ossl_typ.h ../../include/openssl/safestack.h
-cbc_enc.o: ../../include/openssl/stack.h ../../include/openssl/symhacks.h
-cbc_enc.o: ../../include/openssl/ui.h ../../include/openssl/ui_compat.h
-cbc_enc.o: cbc_enc.c des_locl.h ncbc_enc.c
-cfb64ede.o: ../../e_os.h ../../include/openssl/des.h
-cfb64ede.o: ../../include/openssl/des_old.h ../../include/openssl/e_os2.h
-cfb64ede.o: ../../include/openssl/opensslconf.h
-cfb64ede.o: ../../include/openssl/ossl_typ.h ../../include/openssl/safestack.h
-cfb64ede.o: ../../include/openssl/stack.h ../../include/openssl/symhacks.h
-cfb64ede.o: ../../include/openssl/ui.h ../../include/openssl/ui_compat.h
-cfb64ede.o: cfb64ede.c des_locl.h
-cfb64enc.o: ../../include/openssl/des.h ../../include/openssl/des_old.h
-cfb64enc.o: ../../include/openssl/e_os2.h ../../include/openssl/opensslconf.h
-cfb64enc.o: ../../include/openssl/ossl_typ.h ../../include/openssl/safestack.h
-cfb64enc.o: ../../include/openssl/stack.h ../../include/openssl/symhacks.h
-cfb64enc.o: ../../include/openssl/ui.h ../../include/openssl/ui_compat.h
-cfb64enc.o: cfb64enc.c des_locl.h
-cfb_enc.o: ../../e_os.h ../../include/openssl/des.h
-cfb_enc.o: ../../include/openssl/des_old.h ../../include/openssl/e_os2.h
-cfb_enc.o: ../../include/openssl/opensslconf.h ../../include/openssl/ossl_typ.h
-cfb_enc.o: ../../include/openssl/safestack.h ../../include/openssl/stack.h
-cfb_enc.o: ../../include/openssl/symhacks.h ../../include/openssl/ui.h
-cfb_enc.o: ../../include/openssl/ui_compat.h cfb_enc.c des_locl.h
-des_enc.o: ../../include/openssl/des.h ../../include/openssl/des_old.h
-des_enc.o: ../../include/openssl/e_os2.h ../../include/openssl/opensslconf.h
-des_enc.o: ../../include/openssl/ossl_typ.h ../../include/openssl/safestack.h
-des_enc.o: ../../include/openssl/stack.h ../../include/openssl/symhacks.h
-des_enc.o: ../../include/openssl/ui.h ../../include/openssl/ui_compat.h
-des_enc.o: des_enc.c des_locl.h ncbc_enc.c
-des_old.o: ../../include/openssl/des.h ../../include/openssl/des_old.h
-des_old.o: ../../include/openssl/e_os2.h ../../include/openssl/opensslconf.h
-des_old.o: ../../include/openssl/ossl_typ.h ../../include/openssl/rand.h
-des_old.o: ../../include/openssl/safestack.h ../../include/openssl/stack.h
-des_old.o: ../../include/openssl/symhacks.h ../../include/openssl/ui.h
-des_old.o: ../../include/openssl/ui_compat.h des_old.c
-des_old2.o: ../../include/openssl/des.h ../../include/openssl/des_old.h
-des_old2.o: ../../include/openssl/e_os2.h ../../include/openssl/opensslconf.h
-des_old2.o: ../../include/openssl/ossl_typ.h ../../include/openssl/rand.h
-des_old2.o: ../../include/openssl/safestack.h ../../include/openssl/stack.h
-des_old2.o: ../../include/openssl/symhacks.h ../../include/openssl/ui.h
-des_old2.o: ../../include/openssl/ui_compat.h des_old2.c
-ecb3_enc.o: ../../include/openssl/des.h ../../include/openssl/des_old.h
-ecb3_enc.o: ../../include/openssl/e_os2.h ../../include/openssl/opensslconf.h
-ecb3_enc.o: ../../include/openssl/ossl_typ.h ../../include/openssl/safestack.h
-ecb3_enc.o: ../../include/openssl/stack.h ../../include/openssl/symhacks.h
-ecb3_enc.o: ../../include/openssl/ui.h ../../include/openssl/ui_compat.h
-ecb3_enc.o: des_locl.h ecb3_enc.c
-ecb_enc.o: ../../include/openssl/bio.h ../../include/openssl/crypto.h
-ecb_enc.o: ../../include/openssl/des.h ../../include/openssl/des_old.h
-ecb_enc.o: ../../include/openssl/e_os2.h ../../include/openssl/opensslconf.h
-ecb_enc.o: ../../include/openssl/opensslv.h ../../include/openssl/ossl_typ.h
-ecb_enc.o: ../../include/openssl/safestack.h ../../include/openssl/stack.h
-ecb_enc.o: ../../include/openssl/symhacks.h ../../include/openssl/ui.h
-ecb_enc.o: ../../include/openssl/ui_compat.h des_locl.h des_ver.h ecb_enc.c
-ecb_enc.o: spr.h
-ede_cbcm_enc.o: ../../include/openssl/des.h ../../include/openssl/des_old.h
-ede_cbcm_enc.o: ../../include/openssl/e_os2.h
-ede_cbcm_enc.o: ../../include/openssl/opensslconf.h
-ede_cbcm_enc.o: ../../include/openssl/ossl_typ.h
-ede_cbcm_enc.o: ../../include/openssl/safestack.h ../../include/openssl/stack.h
-ede_cbcm_enc.o: ../../include/openssl/symhacks.h ../../include/openssl/ui.h
-ede_cbcm_enc.o: ../../include/openssl/ui_compat.h des_locl.h ede_cbcm_enc.c
-enc_read.o: ../../e_os.h ../../include/openssl/bio.h
-enc_read.o: ../../include/openssl/buffer.h ../../include/openssl/crypto.h
-enc_read.o: ../../include/openssl/des.h ../../include/openssl/des_old.h
-enc_read.o: ../../include/openssl/e_os2.h ../../include/openssl/err.h
-enc_read.o: ../../include/openssl/lhash.h ../../include/openssl/opensslconf.h
-enc_read.o: ../../include/openssl/opensslv.h ../../include/openssl/ossl_typ.h
-enc_read.o: ../../include/openssl/safestack.h ../../include/openssl/stack.h
-enc_read.o: ../../include/openssl/symhacks.h ../../include/openssl/ui.h
-enc_read.o: ../../include/openssl/ui_compat.h ../cryptlib.h des_locl.h
-enc_read.o: enc_read.c
-enc_writ.o: ../../e_os.h ../../include/openssl/bio.h
-enc_writ.o: ../../include/openssl/buffer.h ../../include/openssl/crypto.h
-enc_writ.o: ../../include/openssl/des.h ../../include/openssl/des_old.h
-enc_writ.o: ../../include/openssl/e_os2.h ../../include/openssl/err.h
-enc_writ.o: ../../include/openssl/lhash.h ../../include/openssl/opensslconf.h
-enc_writ.o: ../../include/openssl/opensslv.h ../../include/openssl/ossl_typ.h
-enc_writ.o: ../../include/openssl/rand.h ../../include/openssl/safestack.h
-enc_writ.o: ../../include/openssl/stack.h ../../include/openssl/symhacks.h
-enc_writ.o: ../../include/openssl/ui.h ../../include/openssl/ui_compat.h
-enc_writ.o: ../cryptlib.h des_locl.h enc_writ.c
-fcrypt.o: ../../include/openssl/des.h ../../include/openssl/des_old.h
-fcrypt.o: ../../include/openssl/e_os2.h ../../include/openssl/opensslconf.h
-fcrypt.o: ../../include/openssl/ossl_typ.h ../../include/openssl/safestack.h
-fcrypt.o: ../../include/openssl/stack.h ../../include/openssl/symhacks.h
-fcrypt.o: ../../include/openssl/ui.h ../../include/openssl/ui_compat.h
-fcrypt.o: des_locl.h fcrypt.c
-fcrypt_b.o: ../../include/openssl/des.h ../../include/openssl/des_old.h
-fcrypt_b.o: ../../include/openssl/e_os2.h ../../include/openssl/opensslconf.h
-fcrypt_b.o: ../../include/openssl/ossl_typ.h ../../include/openssl/safestack.h
-fcrypt_b.o: ../../include/openssl/stack.h ../../include/openssl/symhacks.h
-fcrypt_b.o: ../../include/openssl/ui.h ../../include/openssl/ui_compat.h
-fcrypt_b.o: des_locl.h fcrypt_b.c
-ofb64ede.o: ../../include/openssl/des.h ../../include/openssl/des_old.h
-ofb64ede.o: ../../include/openssl/e_os2.h ../../include/openssl/opensslconf.h
-ofb64ede.o: ../../include/openssl/ossl_typ.h ../../include/openssl/safestack.h
-ofb64ede.o: ../../include/openssl/stack.h ../../include/openssl/symhacks.h
-ofb64ede.o: ../../include/openssl/ui.h ../../include/openssl/ui_compat.h
-ofb64ede.o: des_locl.h ofb64ede.c
-ofb64enc.o: ../../include/openssl/des.h ../../include/openssl/des_old.h
-ofb64enc.o: ../../include/openssl/e_os2.h ../../include/openssl/opensslconf.h
-ofb64enc.o: ../../include/openssl/ossl_typ.h ../../include/openssl/safestack.h
-ofb64enc.o: ../../include/openssl/stack.h ../../include/openssl/symhacks.h
-ofb64enc.o: ../../include/openssl/ui.h ../../include/openssl/ui_compat.h
-ofb64enc.o: des_locl.h ofb64enc.c
-ofb_enc.o: ../../include/openssl/des.h ../../include/openssl/des_old.h
-ofb_enc.o: ../../include/openssl/e_os2.h ../../include/openssl/opensslconf.h
-ofb_enc.o: ../../include/openssl/ossl_typ.h ../../include/openssl/safestack.h
-ofb_enc.o: ../../include/openssl/stack.h ../../include/openssl/symhacks.h
-ofb_enc.o: ../../include/openssl/ui.h ../../include/openssl/ui_compat.h
-ofb_enc.o: des_locl.h ofb_enc.c
-pcbc_enc.o: ../../include/openssl/des.h ../../include/openssl/des_old.h
-pcbc_enc.o: ../../include/openssl/e_os2.h ../../include/openssl/opensslconf.h
-pcbc_enc.o: ../../include/openssl/ossl_typ.h ../../include/openssl/safestack.h
-pcbc_enc.o: ../../include/openssl/stack.h ../../include/openssl/symhacks.h
-pcbc_enc.o: ../../include/openssl/ui.h ../../include/openssl/ui_compat.h
-pcbc_enc.o: des_locl.h pcbc_enc.c
-qud_cksm.o: ../../include/openssl/des.h ../../include/openssl/des_old.h
-qud_cksm.o: ../../include/openssl/e_os2.h ../../include/openssl/opensslconf.h
-qud_cksm.o: ../../include/openssl/ossl_typ.h ../../include/openssl/safestack.h
-qud_cksm.o: ../../include/openssl/stack.h ../../include/openssl/symhacks.h
-qud_cksm.o: ../../include/openssl/ui.h ../../include/openssl/ui_compat.h
-qud_cksm.o: des_locl.h qud_cksm.c
-rand_key.o: ../../include/openssl/des.h ../../include/openssl/des_old.h
-rand_key.o: ../../include/openssl/e_os2.h ../../include/openssl/opensslconf.h
-rand_key.o: ../../include/openssl/ossl_typ.h ../../include/openssl/rand.h
-rand_key.o: ../../include/openssl/safestack.h ../../include/openssl/stack.h
-rand_key.o: ../../include/openssl/symhacks.h ../../include/openssl/ui.h
-rand_key.o: ../../include/openssl/ui_compat.h rand_key.c
-read2pwd.o: ../../include/openssl/crypto.h ../../include/openssl/des.h
-read2pwd.o: ../../include/openssl/des_old.h ../../include/openssl/e_os2.h
-read2pwd.o: ../../include/openssl/opensslconf.h
-read2pwd.o: ../../include/openssl/opensslv.h ../../include/openssl/ossl_typ.h
-read2pwd.o: ../../include/openssl/safestack.h ../../include/openssl/stack.h
-read2pwd.o: ../../include/openssl/symhacks.h ../../include/openssl/ui.h
-read2pwd.o: ../../include/openssl/ui_compat.h read2pwd.c
-rpc_enc.o: ../../include/openssl/des.h ../../include/openssl/des_old.h
-rpc_enc.o: ../../include/openssl/e_os2.h ../../include/openssl/opensslconf.h
-rpc_enc.o: ../../include/openssl/ossl_typ.h ../../include/openssl/safestack.h
-rpc_enc.o: ../../include/openssl/stack.h ../../include/openssl/symhacks.h
-rpc_enc.o: ../../include/openssl/ui.h ../../include/openssl/ui_compat.h
-rpc_enc.o: des_locl.h des_ver.h rpc_des.h rpc_enc.c
-set_key.o: ../../include/openssl/des.h ../../include/openssl/des_old.h
-set_key.o: ../../include/openssl/e_os2.h ../../include/openssl/opensslconf.h
-set_key.o: ../../include/openssl/ossl_typ.h ../../include/openssl/safestack.h
-set_key.o: ../../include/openssl/stack.h ../../include/openssl/symhacks.h
-set_key.o: ../../include/openssl/ui.h ../../include/openssl/ui_compat.h
-set_key.o: des_locl.h set_key.c
-str2key.o: ../../include/openssl/crypto.h ../../include/openssl/des.h
-str2key.o: ../../include/openssl/des_old.h ../../include/openssl/e_os2.h
-str2key.o: ../../include/openssl/opensslconf.h ../../include/openssl/opensslv.h
-str2key.o: ../../include/openssl/ossl_typ.h ../../include/openssl/safestack.h
-str2key.o: ../../include/openssl/stack.h ../../include/openssl/symhacks.h
-str2key.o: ../../include/openssl/ui.h ../../include/openssl/ui_compat.h
-str2key.o: des_locl.h str2key.c
-xcbc_enc.o: ../../include/openssl/des.h ../../include/openssl/des_old.h
-xcbc_enc.o: ../../include/openssl/e_os2.h ../../include/openssl/opensslconf.h
-xcbc_enc.o: ../../include/openssl/ossl_typ.h ../../include/openssl/safestack.h
-xcbc_enc.o: ../../include/openssl/stack.h ../../include/openssl/symhacks.h
-xcbc_enc.o: ../../include/openssl/ui.h ../../include/openssl/ui_compat.h
-xcbc_enc.o: des_locl.h xcbc_enc.c
diff --git a/crypto/openssl/crypto/des/README b/crypto/openssl/crypto/des/README
deleted file mode 100644
index 621a5ab4676b..000000000000
--- a/crypto/openssl/crypto/des/README
+++ /dev/null
@@ -1,54 +0,0 @@
-
-		libdes, Version 4.01 10-Jan-97
-
-		Copyright (c) 1997, Eric Young
-			  All rights reserved.
-
-    This program is free software; you can redistribute it and/or modify
-    it under the terms specified in COPYRIGHT.
-    
---
-The primary ftp site for this library is
-ftp://ftp.psy.uq.oz.au/pub/Crypto/DES/libdes-x.xx.tar.gz
-libdes is now also shipped with SSLeay.  Primary ftp site of
-ftp://ftp.psy.uq.oz.au/pub/Crypto/SSL/SSLeay-x.x.x.tar.gz
-
-The best way to build this library is to build it as part of SSLeay.
-
-This kit builds a DES encryption library and a DES encryption program.
-It supports ecb, cbc, ofb, cfb, triple ecb, triple cbc, triple ofb,
-triple cfb, desx, and MIT's pcbc encryption modes and also has a fast
-implementation of crypt(3).
-It contains support routines to read keys from a terminal,
-generate a random key, generate a key from an arbitrary length string,
-read/write encrypted data from/to a file descriptor.
-
-The implementation was written so as to conform with the manual entry
-for the des_crypt(3) library routines from MIT's project Athena.
-
-destest should be run after compilation to test the des routines.
-rpw should be run after compilation to test the read password routines.
-The des program is a replacement for the sun des command.  I believe it
-conforms to the sun version.
-
-The Imakefile is setup for use in the kerberos distribution.
-
-These routines are best compiled with gcc or any other good
-optimising compiler.
-Just turn you optimiser up to the highest settings and run destest
-after the build to make sure everything works.
-
-I believe these routines are close to the fastest and most portable DES
-routines that use small lookup tables (4.5k) that are publicly available.
-The fcrypt routine is faster than ufc's fcrypt (when compiling with
-gcc2 -O2) on the sparc 2 (1410 vs 1270) but is not so good on other machines
-(on a sun3/260 168 vs 336).  It is a function of CPU on chip cache size.
-[ 10-Jan-97 and a function of an incorrect speed testing program in
-  ufc which gave much better test figures that reality ].
-
-It is worth noting that on sparc and Alpha CPUs, performance of the DES
-library can vary by upto %10 due to the positioning of files after application
-linkage.
-
-Eric Young (eay@cryptsoft.com)
-
diff --git a/crypto/openssl/crypto/des/VERSION b/crypto/openssl/crypto/des/VERSION
deleted file mode 100644
index c7d01542bc73..000000000000
--- a/crypto/openssl/crypto/des/VERSION
+++ /dev/null
@@ -1,412 +0,0 @@
-	Fixed the weak key values which were wrong :-(
-	Defining SIGACTION causes sigaction() to be used instead of signal().
-	SIGUSR1/SIGUSR2 are no longer mapped in the read tty stuff because it
-	can cause problems.  This should hopefully not affect normal
-	applications.
-
-Version 4.04
-	Fixed a few tests in destest.  Also added x86 assember for
-	des_ncbc_encrypt() which is the standard cbc mode function.
-	This makes a very very large performace difference.
-	Ariel Glenn ariel@columbia.edu reports that the terminal
-	'turn echo off' can return (errno == EINVAL) under solaris
-	when redirection is used.  So I now catch that as well as ENOTTY.
-
-
-Version 4.03
-	Left a static out of enc_write.c, which caused to buffer to be
-	continiously malloc()ed.  Does anyone use these functions?  I keep
-	on feeling like removing them since I only had these in there
-	for a version of kerberised login.  Anyway, this was pointed out
-	by Theo de Raadt <deraadt@cvs.openbsd.org>
-	The 'n' bit ofb code was wrong, it was not shifting the shift
-	register. It worked correctly for n == 64.  Thanks to
-	Gigi Ankeny <Gigi.Ankeny@Eng.Sun.COM> for pointing this one out.
-
-Version 4.02
-	I was doing 'if (memcmp(weak_keys[i],key,sizeof(key)) == 0)'
-	when checking for weak keys which is wrong :-(, pointed out by
-	Markus F.X.J. Oberhumer <markus.oberhumer@jk.uni-linz.ac.at>.
-
-Version 4.01
-	Even faster inner loop in the DES assembler for x86 and a modification
-	for IP/FP which is faster on x86.  Both of these changes are
-	from Svend Olaf Mikkelsen <svolaf@inet.uni-c.dk>.  His
-	changes make the assembler run %40 faster on a pentium.  This is just
-	a case of getting the instruction sequence 'just right'.
-	All credit to 'Svend' :-)
-	Quite a few special x86 'make' targets.
-	A libdes-l (lite) distribution.
-
-Version 4.00
-	After a bit of a pause, I'll up the major version number since this
-	is mostly a performace release.  I've added x86 assembler and
-	added more options for performance.  A %28 speedup for gcc 
-	on a pentium and the assembler is a %50 speedup.
-	MIPS CPU's, sparc and Alpha are the main CPU's with speedups.
-	Run des_opts to work out which options should be used.
-	DES_RISC1/DES_RISC2 use alternative inner loops which use
-	more registers but should give speedups on any CPU that does
-	dual issue (pentium).  DES_UNROLL unrolls the inner loop,
-	which costs in code size.
-
-Version 3.26
-	I've finally removed one of the shifts in D_ENCRYPT.  This
-	meant I've changed the des_SPtrans table (spr.h), the set_key()
-	function and some things in des_enc.c.  This has definitly
-	made things faster :-).  I've known about this one for some
-	time but I've been too lazy to follow it up :-).
-	Noticed that in the D_ENCRYPT() macro, we can just do L^=(..)^(..)^..
-	instead of L^=((..)|(..)|(..)..  This should save a register at
-	least.
-	Assember for x86.  The file to replace is des_enc.c, which is replaced
-	by one of the assembler files found in asm.  Look at des/asm/readme
-	for more info.
-
-	/* Modification to fcrypt so it can be compiled to support
-	HPUX 10.x's long password format, define -DLONGCRYPT to use this.
-	Thanks to Jens Kupferschmidt <bt1cu@hpboot.rz.uni-leipzig.de>. */
-
-	SIGWINCH case put in des_read_passwd() so the function does not
-	'exit' if this function is recieved.
-
-Version 3.25 17/07/96
-	Modified read_pwd.c so that stdin can be read if not a tty.
-	Thanks to Jeff Barber <jeffb@issl.atl.hp.com> for the patches.
-	des_init_random_number_generator() shortened due to VMS linker
-	limits.
-	Added RSA's DESX cbc mode.  It is a form of cbc encryption, with 2
-	8 byte quantites xored before and after encryption.
-	des_xcbc_encryption() - the name is funny to preserve the des_
-	prefix on all functions.
-
-Version 3.24 20/04/96
-	The DES_PTR macro option checked and used by SSLeay configuration
-
-Version 3.23 11/04/96
-	Added DES_LONG.  If defined to 'unsigned int' on the DEC Alpha,
-	it gives a %20 speedup :-)
-	Fixed the problem with des.pl under perl5.  The patches were
-	sent by Ed Kubaitis (ejk@uiuc.edu).
-	if fcrypt.c, changed values to handle illegal salt values the way
-	normal crypt() implementations do.  Some programs apparently use
-	them :-(. The patch was sent by Bjorn Gronvall <bg@sics.se>
-
-Version 3.22 29/11/95
-	Bug in des(1), an error with the uuencoding stuff when the
-	'data' is small, thanks to Geoff Keating <keagchon@mehta.anu.edu.au>
-	for the patch.
-
-Version 3.21 22/11/95
-	After some emailing back and forth with 
-	Colin Plumb <colin@nyx10.cs.du.edu>, I've tweaked a few things
-	and in a future version I will probably put in some of the
-	optimisation he suggested for use with the DES_USE_PTR option.
-	Extra routines from Mark Murray <mark@grondar.za> for use in
-	freeBSD.  They mostly involve random number generation for use
-	with kerberos.  They involve evil machine specific system calls
-	etc so I would normally suggest pushing this stuff into the
-	application and/or using RAND_seed()/RAND_bytes() if you are
-	using this DES library as part of SSLeay.
-	Redone the read_pw() function so that it is cleaner and
-	supports termios, thanks to Sameer Parekh <sameer@c2.org>
-	for the initial patches for this.
-	Renamed 3ecb_encrypt() to ecb3_encrypt().  This has been
-	 done just to make things more consistent.
-	I have also now added triple DES versions of cfb and ofb.
-
-Version 3.20
-	Damn, Damn, Damn, as pointed out by Mike_Spreitzer.PARC@xerox.com,
-	my des_random_seed() function was only copying 4 bytes of the
-	passed seed into the init structure.  It is now fixed to copy 8.
-	My own suggestion is to used something like MD5 :-)
-
-Version 3.19 
-	While looking at my code one day, I though, why do I keep on
-	calling des_encrypt(in,out,ks,enc) when every function that
-	calls it has in and out the same.  So I dropped the 'out'
-	parameter, people should not be using this function.
-
-Version 3.18 30/08/95
-	Fixed a few bit with the distribution and the filenames.
-	3.17 had been munged via a move to DOS and back again.
-	NO CODE CHANGES
-
-Version 3.17 14/07/95
-	Fixed ede3 cbc which I had broken in 3.16.  I have also
-	removed some unneeded variables in 7-8 of the routines.
-
-Version 3.16 26/06/95
-	Added des_encrypt2() which does not use IP/FP, used by triple
-	des routines.  Tweaked things a bit elsewhere. %13 speedup on
-	sparc and %6 on a R4400 for ede3 cbc mode.
-
-Version 3.15 06/06/95
-	Added des_ncbc_encrypt(), it is des_cbc mode except that it is
-	'normal' and copies the new iv value back over the top of the
-	passed parameter.
-	CHANGED des_ede3_cbc_encrypt() so that it too now overwrites
-	the iv.  THIS WILL BREAK EXISTING CODE, but since this function
-	only new, I feel I can change it, not so with des_cbc_encrypt :-(.
-	I need to update the documentation.
-
-Version 3.14 31/05/95
-	New release upon the world, as part of my SSL implementation.
-	New copyright and usage stuff.  Basically free for all to use
-	as long as you say it came from me :-)
-
-Version 3.13 31/05/95
-	A fix in speed.c, if HZ is not defined, I set it to 100.0
-	which is reasonable for most unixes except SunOS 4.x.
-	I now have a #ifdef sun but timing for SunOS 4.x looked very
-	good :-(.  At my last job where I used SunOS 4.x, it was
-	defined to be 60.0 (look at the old INSTALL documentation), at
-	the last release had it changed to 100.0 since I now work with
-	Solaris2 and SVR4 boxes.
-	Thanks to  Rory Chisholm <rchishol@math.ethz.ch> for pointing this
-	one out.
-
-Version 3.12 08/05/95
-	As pointed out by The Crypt Keeper <tck@bend.UCSD.EDU>,
-	my D_ENCRYPT macro in crypt() had an un-necessary variable.
-	It has been removed.
-
-Version 3.11 03/05/95
-	Added des_ede3_cbc_encrypt() which is cbc mode des with 3 keys
-	and one iv.  It is a standard and I needed it for my SSL code.
-	It makes more sense to use this for triple DES than
-	3cbc_encrypt().  I have also added (or should I say tested :-)
-	cfb64_encrypt() which is cfb64 but it will encrypt a partial
-	number of bytes - 3 bytes in 3 bytes out.  Again this is for
-	my SSL library, as a form of encryption to use with SSL
-	telnet.
-
-Version 3.10 22/03/95
-	Fixed a bug in 3cbc_encrypt() :-(.  When making repeated calls
-	to cbc3_encrypt, the 2 iv values that were being returned to
-	be used in the next call were reversed :-(.
-	Many thanks to Bill Wade <wade@Stoner.COM> for pointing out
-	this error.
-
-Version 3.09 01/02/95
-	Fixed des_random_key to far more random, it was rather feeble
-	with regards to picking the initial seed.  The problem was
-	pointed out by Olaf Kirch <okir@monad.swb.de>.
-
-Version 3.08 14/12/94
-	Added Makefile.PL so libdes can be built into perl5.
-	Changed des_locl.h so RAND is always defined.
-
-Version 3.07 05/12/94
-	Added GNUmake and stuff so the library can be build with
-	glibc.
-
-Version 3.06 30/08/94
-	Added rpc_enc.c which contains _des_crypt.  This is for use in
-	secure_rpc v 4.0
-	Finally fixed the cfb_enc problems.
-	Fixed a few parameter parsing bugs in des (-3 and -b), thanks
-	to Rob McMillan <R.McMillan@its.gu.edu.au>
-
-Version 3.05 21/04/94
-	for unsigned long l; gcc does not produce ((l>>34) == 0)
-	This causes bugs in cfb_enc.
-	Thanks to Hadmut Danisch <danisch@ira.uka.de>
-
-Version 3.04 20/04/94
-	Added a version number to des.c and libdes.a
-
-Version 3.03 12/01/94
-	Fixed a bug in non zero iv in 3cbc_enc.
-
-Version 3.02 29/10/93
-	I now work in a place where there are 6+ architectures and 14+
-	OS versions :-).
-	Fixed TERMIO definition so the most sys V boxes will work :-)
-
-Release upon comp.sources.misc
-Version 3.01 08/10/93
-	Added des_3cbc_encrypt()
-
-Version 3.00 07/10/93
-	Fixed up documentation.
-	quad_cksum definitely compatible with MIT's now.
-
-Version 2.30 24/08/93
-	Triple DES now defaults to triple cbc but can do triple ecb
-	 with the -b flag.
-	Fixed some MSDOS uuen/uudecoding problems, thanks to
-	Added prototypes.
-	
-Version 2.22 29/06/93
-	Fixed a bug in des_is_weak_key() which stopped it working :-(
-	thanks to engineering@MorningStar.Com.
-
-Version 2.21 03/06/93
-	des(1) with no arguments gives quite a bit of help.
-	Added -c (generate ckecksum) flag to des(1).
-	Added -3 (triple DES) flag to des(1).
-	Added cfb and ofb routines to the library.
-
-Version 2.20 11/03/93
-	Added -u (uuencode) flag to des(1).
-	I have been playing with byte order in quad_cksum to make it
-	 compatible with MIT's version.  All I can say is avid this
-	 function if possible since MIT's output is endian dependent.
-
-Version 2.12 14/10/92
-	Added MSDOS specific macro in ecb_encrypt which gives a %70
-	 speed up when the code is compiled with turbo C.
-
-Version 2.11 12/10/92
-	Speedup in set_key (recoding of PC-1)
-	 I now do it in 47 simple operations, down from 60.
-	 Thanks to John Fletcher (john_fletcher@lccmail.ocf.llnl.gov)
-	 for motivating me to look for a faster system :-)
-	 The speedup is probably less that 1% but it is still 13
-	 instructions less :-).
-
-Version 2.10 06/10/92
-	The code now works on the 64bit ETA10 and CRAY without modifications or
-	 #defines.  I believe the code should work on any machine that
-	 defines long, int or short to be 8 bytes long.
-	Thanks to Shabbir J. Safdar (shabby@mentor.cc.purdue.edu)
-	 for helping me fix the code to run on 64bit machines (he had
-	 access to an ETA10).
-	Thanks also to John Fletcher <john_fletcher@lccmail.ocf.llnl.gov>
-	 for testing the routines on a CRAY.
-	read_password.c has been renamed to read_passwd.c
-	string_to_key.c has been renamed to string2key.c
-
-Version 2.00 14/09/92
-	Made mods so that the library should work on 64bit CPU's.
-	Removed all my uchar and ulong defs.  To many different
-	 versions of unix define them in their header files in too many
-	 different combinations :-)
-	IRIX - Sillicon Graphics mods (mostly in read_password.c).
-	 Thanks to Andrew Daviel (advax@erich.triumf.ca)
-
-Version 1.99 26/08/92
-	Fixed a bug or 2 in enc_read.c
-	Fixed a bug in enc_write.c
-	Fixed a pseudo bug in fcrypt.c (very obscure).
-
-Version 1.98 31/07/92
-	Support for the ETA10.  This is a strange machine that defines
-	longs and ints as 8 bytes and shorts as 4 bytes.
-	Since I do evil things with long * that assume that they are 4
-	bytes.  Look in the Makefile for the option to compile for
-	this machine.  quad_cksum appears to have problems but I
-	will don't have the time to fix it right now, and this is not
-	a function that uses DES and so will not effect the main uses
-	of the library.
-
-Version 1.97 20/05/92 eay
-	Fixed the Imakefile and made some changes to des.h to fix some
-	problems when building this package with Kerberos v 4.
-
-Version 1.96 18/05/92 eay
-	Fixed a small bug in string_to_key() where problems could
-	occur if des_check_key was set to true and the string
-	generated a weak key.
-
-Patch2 posted to comp.sources.misc
-Version 1.95 13/05/92 eay
-	Added an alternative version of the D_ENCRYPT macro in
-	ecb_encrypt and fcrypt.  Depending on the compiler, one version or the
-	other will be faster.  This was inspired by 
-	Dana How <how@isl.stanford.edu>, and her pointers about doing the
-	*(ulong *)((uchar *)ptr+(value&0xfc))
-	vs
-	ptr[value&0x3f]
-	to stop the C compiler doing a <<2 to convert the long array index.
-
-Version 1.94 05/05/92 eay
-	Fixed an incompatibility between my string_to_key and the MIT
-	 version.  When the key is longer than 8 chars, I was wrapping
-	 with a different method.  To use the old version, define
-	 OLD_STR_TO_KEY in the makefile.  Thanks to
-	 viktor@newsu.shearson.com (Viktor Dukhovni).
-
-Version 1.93 28/04/92 eay
-	Fixed the VMS mods so that echo is now turned off in
-	 read_password.  Thanks again to brennan@coco.cchs.su.oz.AU.
-	MSDOS support added.  The routines can be compiled with
-	 Turbo C (v2.0) and MSC (v5.1).  Make sure MSDOS is defined.
-
-Patch1 posted to comp.sources.misc
-Version 1.92 13/04/92 eay
-	Changed D_ENCRYPT so that the rotation of R occurs outside of
-	 the loop.  This required rotating all the longs in sp.h (now
-	 called spr.h). Thanks to Richard Outerbridge <71755.204@CompuServe.COM>
-	speed.c has been changed so it will work without SIGALRM.  If
-	 times(3) is not present it will try to use ftime() instead.
-
-Version 1.91 08/04/92 eay
-	Added -E/-D options to des(1) so it can use string_to_key.
-	Added SVR4 mods suggested by witr@rwwa.COM
-	Added VMS mods suggested by brennan@coco.cchs.su.oz.AU.  If
-	anyone knows how to turn of tty echo in VMS please tell me or
-	implement it yourself :-).
-	Changed FILE *IN/*OUT to *DES_IN/*DES_OUT since it appears VMS
-	does not like IN/OUT being used.
-
-Libdes posted to comp.sources.misc
-Version 1.9 24/03/92 eay
-	Now contains a fast small crypt replacement.
-	Added des(1) command.
-	Added des_rw_mode so people can use cbc encryption with
-	enc_read and enc_write.
-
-Version 1.8 15/10/91 eay
-	Bug in cbc_cksum.
-	Many thanks to Keith Reynolds (keithr@sco.COM) for pointing this
-	one out.
-
-Version 1.7 24/09/91 eay
-	Fixed set_key :-)
-	set_key is 4 times faster and takes less space.
-	There are a few minor changes that could be made.
-
-Version 1.6 19/09/1991 eay
-	Finally go IP and FP finished.
-	Now I need to fix set_key.
-	This version is quite a bit faster that 1.51
-
-Version 1.52 15/06/1991 eay
-	20% speedup in ecb_encrypt by changing the E bit selection
-	to use 2 32bit words.  This also required modification of the
-	sp table.  There is still a way to speedup the IP and IP-1
-	(hints from outer@sq.com) still working on this one :-(.
-
-Version 1.51 07/06/1991 eay
-	Faster des_encrypt by loop unrolling
-	Fixed bug in quad_cksum.c (thanks to hughes@logos.ucs.indiana.edu)
-
-Version 1.50 28/05/1991 eay
-	Optimised the code a bit more for the sparc.  I have improved the
-	speed of the inner des_encrypt by speeding up the initial and
-	final permutations.
-
-Version 1.40 23/10/1990 eay
-	Fixed des_random_key, it did not produce a random key :-(
-
-Version 1.30  2/10/1990 eay
-	Have made des_quad_cksum the same as MIT's, the full package
-	should be compatible with MIT's
-	Have tested on a DECstation 3100
-	Still need to fix des_set_key (make it faster).
-	Does des_cbc_encrypts at 70.5k/sec on a 3100.
-
-Version 1.20 18/09/1990 eay
-	Fixed byte order dependencies.
-	Fixed (I hope) all the word alignment problems.
-	Speedup in des_ecb_encrypt.
-
-Version 1.10 11/09/1990 eay
-	Added des_enc_read and des_enc_write.
-	Still need to fix des_quad_cksum.
-	Still need to document des_enc_read and des_enc_write.
-
-Version 1.00 27/08/1990 eay
-
diff --git a/crypto/openssl/crypto/des/asm/crypt586.pl b/crypto/openssl/crypto/des/asm/crypt586.pl
deleted file mode 100644
index 1d04ed6def10..000000000000
--- a/crypto/openssl/crypto/des/asm/crypt586.pl
+++ /dev/null
@@ -1,208 +0,0 @@
-#!/usr/local/bin/perl
-#
-# The inner loop instruction sequence and the IP/FP modifications are from
-# Svend Olaf Mikkelsen <svolaf@inet.uni-c.dk>
-# I've added the stuff needed for crypt() but I've not worried about making
-# things perfect.
-#
-
-push(@INC,"perlasm","../../perlasm");
-require "x86asm.pl";
-
-&asm_init($ARGV[0],"crypt586.pl");
-
-$L="edi";
-$R="esi";
-
-&external_label("DES_SPtrans");
-&fcrypt_body("fcrypt_body");
-&asm_finish();
-
-sub fcrypt_body
-	{
-	local($name,$do_ip)=@_;
-
-	&function_begin($name,"EXTRN   _DES_SPtrans:DWORD");
-
-	&comment("");
-	&comment("Load the 2 words");
-	$trans="ebp";
-
-	&xor(	$L,	$L);
-	&xor(	$R,	$R);
-
-	# PIC-ification:-)
-	&picmeup("edx","DES_SPtrans");
-	#if ($cpp)	{ &picmeup("edx","DES_SPtrans");   }
-	#else		{ &lea("edx",&DWP("DES_SPtrans")); }
-	&push("edx");	# becomes &swtmp(1)
-	#
-	&mov($trans,&wparam(1)); # reloaded with DES_SPtrans in D_ENCRYPT
-
-	&push(&DWC(25)); # add a variable
-
-	&set_label("start");
-	for ($i=0; $i<16; $i+=2)
-		{
-		&comment("");
-		&comment("Round $i");
-		&D_ENCRYPT($i,$L,$R,$i*2,$trans,"eax","ebx","ecx","edx");
-
-		&comment("");
-		&comment("Round ".sprintf("%d",$i+1));
-		&D_ENCRYPT($i+1,$R,$L,($i+1)*2,$trans,"eax","ebx","ecx","edx");
-		}
-	 &mov("ebx",	&swtmp(0));
-	&mov("eax",	$L);
-	 &dec("ebx");
-	&mov($L,	$R);
-	 &mov($R,	"eax");
-	&mov(&swtmp(0),	"ebx");
-	 &jnz(&label("start"));
-
-	&comment("");
-	&comment("FP");
-	&mov("edx",&wparam(0));
-
-	&FP_new($R,$L,"eax",3);
-	&mov(&DWP(0,"edx","",0),"eax");
-	&mov(&DWP(4,"edx","",0),$L);
-
-	&add("esp",8);	# remove variables
-
-	&function_end($name);
-	}
-
-sub D_ENCRYPT
-	{
-	local($r,$L,$R,$S,$trans,$u,$tmp1,$tmp2,$t)=@_;
-
-	&mov(	$u,		&wparam(2));			# 2
-	&mov(	$t,		$R);
-	&shr(	$t,		16);				# 1
-	&mov(	$tmp2,		&wparam(3));			# 2
-	&xor(	$t,		$R);				# 1
-
-	&and(	$u,		$t);				# 2
-	&and(	$t,		$tmp2);				# 2
-
-	&mov(	$tmp1,		$u);
-	&shl(	$tmp1,		16); 				# 1
-	&mov(	$tmp2,		$t);
-	&shl(	$tmp2,		16); 				# 1
-	&xor(	$u,		$tmp1);				# 2
-	&xor(	$t,		$tmp2);				# 2
-	&mov(	$tmp1,		&DWP(&n2a($S*4),$trans,"",0));	# 2
-	&xor(	$u,		$tmp1);
-	&mov(	$tmp2,		&DWP(&n2a(($S+1)*4),$trans,"",0));	# 2
-	&xor(	$u,		$R);
-	&xor(	$t,		$R);
-	&xor(	$t,		$tmp2);
-
-	&and(	$u,		"0xfcfcfcfc"	);		# 2
-	&xor(	$tmp1,		$tmp1);				# 1
-	&and(	$t,		"0xcfcfcfcf"	);		# 2
-	&xor(	$tmp2,		$tmp2);	
-	&movb(	&LB($tmp1),	&LB($u)	);
-	&movb(	&LB($tmp2),	&HB($u)	);
-	&rotr(	$t,		4		);
-	&mov(	$trans,		&swtmp(1));
-	&xor(	$L,		&DWP("     ",$trans,$tmp1,0));
-	&movb(	&LB($tmp1),	&LB($t)	);
-	&xor(	$L,		&DWP("0x200",$trans,$tmp2,0));
-	&movb(	&LB($tmp2),	&HB($t)	);
-	&shr(	$u,		16);
-	&xor(	$L,		&DWP("0x100",$trans,$tmp1,0));
-	&movb(	&LB($tmp1),	&HB($u)	);
-	&shr(	$t,		16);
-	&xor(	$L,		&DWP("0x300",$trans,$tmp2,0));
-	&movb(	&LB($tmp2),	&HB($t)	);
-	&and(	$u,		"0xff"	);
-	&and(	$t,		"0xff"	);
-	&mov(	$tmp1,		&DWP("0x600",$trans,$tmp1,0));
-	&xor(	$L,		$tmp1);
-	&mov(	$tmp1,		&DWP("0x700",$trans,$tmp2,0));
-	&xor(	$L,		$tmp1);
-	&mov(	$tmp1,		&DWP("0x400",$trans,$u,0));
-	&xor(	$L,		$tmp1);
-	&mov(	$tmp1,		&DWP("0x500",$trans,$t,0));
-	&xor(	$L,		$tmp1);
-	&mov(	$trans,		&wparam(1));
-	}
-
-sub n2a
-	{
-	sprintf("%d",$_[0]);
-	}
-
-# now has a side affect of rotating $a by $shift
-sub R_PERM_OP
-	{
-	local($a,$b,$tt,$shift,$mask,$last)=@_;
-
-	&rotl(	$a,		$shift		) if ($shift != 0);
-	&mov(	$tt,		$a		);
-	&xor(	$a,		$b		);
-	&and(	$a,		$mask		);
-	if ($notlast eq $b)
-		{
-		&xor(	$b,		$a		);
-		&xor(	$tt,		$a		);
-		}
-	else
-		{
-		&xor(	$tt,		$a		);
-		&xor(	$b,		$a		);
-		}
-	&comment("");
-	}
-
-sub IP_new
-	{
-	local($l,$r,$tt,$lr)=@_;
-
-	&R_PERM_OP($l,$r,$tt, 4,"0xf0f0f0f0",$l);
-	&R_PERM_OP($r,$tt,$l,20,"0xfff0000f",$l);
-	&R_PERM_OP($l,$tt,$r,14,"0x33333333",$r);
-	&R_PERM_OP($tt,$r,$l,22,"0x03fc03fc",$r);
-	&R_PERM_OP($l,$r,$tt, 9,"0xaaaaaaaa",$r);
-	
-	if ($lr != 3)
-		{
-		if (($lr-3) < 0)
-			{ &rotr($tt,	3-$lr); }
-		else	{ &rotl($tt,	$lr-3); }
-		}
-	if ($lr != 2)
-		{
-		if (($lr-2) < 0)
-			{ &rotr($r,	2-$lr); }
-		else	{ &rotl($r,	$lr-2); }
-		}
-	}
-
-sub FP_new
-	{
-	local($l,$r,$tt,$lr)=@_;
-
-	if ($lr != 2)
-		{
-		if (($lr-2) < 0)
-			{ &rotl($r,	2-$lr); }
-		else	{ &rotr($r,	$lr-2); }
-		}
-	if ($lr != 3)
-		{
-		if (($lr-3) < 0)
-			{ &rotl($l,	3-$lr); }
-		else	{ &rotr($l,	$lr-3); }
-		}
-
-	&R_PERM_OP($l,$r,$tt, 0,"0xaaaaaaaa",$r);
-	&R_PERM_OP($tt,$r,$l,23,"0x03fc03fc",$r);
-	&R_PERM_OP($l,$r,$tt,10,"0x33333333",$l);
-	&R_PERM_OP($r,$tt,$l,18,"0xfff0000f",$l);
-	&R_PERM_OP($l,$tt,$r,12,"0xf0f0f0f0",$r);
-	&rotr($tt	, 4);
-	}
-
diff --git a/crypto/openssl/crypto/des/asm/des-586.pl b/crypto/openssl/crypto/des/asm/des-586.pl
deleted file mode 100644
index b75d3c6b3a44..000000000000
--- a/crypto/openssl/crypto/des/asm/des-586.pl
+++ /dev/null
@@ -1,251 +0,0 @@
-#!/usr/local/bin/perl
-#
-# The inner loop instruction sequence and the IP/FP modifications are from
-# Svend Olaf Mikkelsen <svolaf@inet.uni-c.dk>
-#
-
-push(@INC,"perlasm","../../perlasm");
-require "x86asm.pl";
-require "cbc.pl";
-require "desboth.pl";
-
-# base code is in microsft
-# op dest, source
-# format.
-#
-
-&asm_init($ARGV[0],"des-586.pl");
-
-$L="edi";
-$R="esi";
-
-&external_label("DES_SPtrans");
-&DES_encrypt("DES_encrypt1",1);
-&DES_encrypt("DES_encrypt2",0);
-&DES_encrypt3("DES_encrypt3",1);
-&DES_encrypt3("DES_decrypt3",0);
-&cbc("DES_ncbc_encrypt","DES_encrypt1","DES_encrypt1",0,4,5,3,5,-1);
-&cbc("DES_ede3_cbc_encrypt","DES_encrypt3","DES_decrypt3",0,6,7,3,4,5);
-
-&asm_finish();
-
-sub DES_encrypt
-	{
-	local($name,$do_ip)=@_;
-
-	&function_begin_B($name,"EXTRN   _DES_SPtrans:DWORD");
-
-	&push("esi");
-	&push("edi");
-
-	&comment("");
-	&comment("Load the 2 words");
-	$trans="ebp";
-
-	if ($do_ip)
-		{
-		&mov($R,&wparam(0));
-		 &xor(	"ecx",		"ecx"		);
-
-		&push("ebx");
-		&push("ebp");
-
-		&mov("eax",&DWP(0,$R,"",0));
-		 &mov("ebx",&wparam(2));	# get encrypt flag
-		&mov($L,&DWP(4,$R,"",0));
-		&comment("");
-		&comment("IP");
-		&IP_new("eax",$L,$R,3);
-		}
-	else
-		{
-		&mov("eax",&wparam(0));
-		 &xor(	"ecx",		"ecx"		);
-
-		&push("ebx");
-		&push("ebp");
-
-		&mov($R,&DWP(0,"eax","",0));
-		 &mov("ebx",&wparam(2));	# get encrypt flag
-		&rotl($R,3);
-		&mov($L,&DWP(4,"eax","",0));
-		&rotl($L,3);
-		}
-
-	# PIC-ification:-)
-	&picmeup($trans,"DES_SPtrans");
-	#if ($cpp)	{ &picmeup($trans,"DES_SPtrans");   }
-	#else		{ &lea($trans,&DWP("DES_SPtrans")); }
-
-	&mov(	"ecx",	&wparam(1)	);
-	&cmp("ebx","0");
-	&je(&label("start_decrypt"));
-
-	for ($i=0; $i<16; $i+=2)
-		{
-		&comment("");
-		&comment("Round $i");
-		&D_ENCRYPT($i,$L,$R,$i*2,$trans,"eax","ebx","ecx","edx");
-
-		&comment("");
-		&comment("Round ".sprintf("%d",$i+1));
-		&D_ENCRYPT($i+1,$R,$L,($i+1)*2,$trans,"eax","ebx","ecx","edx");
-		}
-	&jmp(&label("end"));
-
-	&set_label("start_decrypt");
-
-	for ($i=15; $i>0; $i-=2)
-		{
-		&comment("");
-		&comment("Round $i");
-		&D_ENCRYPT(15-$i,$L,$R,$i*2,$trans,"eax","ebx","ecx","edx");
-		&comment("");
-		&comment("Round ".sprintf("%d",$i-1));
-		&D_ENCRYPT(15-$i+1,$R,$L,($i-1)*2,$trans,"eax","ebx","ecx","edx");
-		}
-
-	&set_label("end");
-
-	if ($do_ip)
-		{
-		&comment("");
-		&comment("FP");
-		&mov("edx",&wparam(0));
-		&FP_new($L,$R,"eax",3);
-
-		&mov(&DWP(0,"edx","",0),"eax");
-		&mov(&DWP(4,"edx","",0),$R);
-		}
-	else
-		{
-		&comment("");
-		&comment("Fixup");
-		&rotr($L,3);		# r
-		 &mov("eax",&wparam(0));
-		&rotr($R,3);		# l
-		 &mov(&DWP(0,"eax","",0),$L);
-		 &mov(&DWP(4,"eax","",0),$R);
-		}
-
-	&pop("ebp");
-	&pop("ebx");
-	&pop("edi");
-	&pop("esi");
-	&ret();
-
-	&function_end_B($name);
-	}
-
-sub D_ENCRYPT
-	{
-	local($r,$L,$R,$S,$trans,$u,$tmp1,$tmp2,$t)=@_;
-
-	 &mov(	$u,		&DWP(&n2a($S*4),$tmp2,"",0));
-	&xor(	$tmp1,		$tmp1);
-	 &mov(	$t,		&DWP(&n2a(($S+1)*4),$tmp2,"",0));
-	&xor(	$u,		$R);
-	&xor(	$tmp2,		$tmp2);
-	 &xor(	$t,		$R);
-	&and(	$u,		"0xfcfcfcfc"	);
-	 &and(	$t,		"0xcfcfcfcf"	);
-	&movb(	&LB($tmp1),	&LB($u)	);
-	 &movb(	&LB($tmp2),	&HB($u)	);
-	&rotr(	$t,		4		);
-	&xor(	$L,		&DWP("     ",$trans,$tmp1,0));
-	 &movb(	&LB($tmp1),	&LB($t)	);
-	 &xor(	$L,		&DWP("0x200",$trans,$tmp2,0));
-	 &movb(	&LB($tmp2),	&HB($t)	);
-	&shr(	$u,		16);
-	 &xor(	$L,		&DWP("0x100",$trans,$tmp1,0));
-	 &movb(	&LB($tmp1),	&HB($u)	);
-	&shr(	$t,		16);
-	 &xor(	$L,		&DWP("0x300",$trans,$tmp2,0));
-	&movb(	&LB($tmp2),	&HB($t)	);
-	 &and(	$u,		"0xff"	);
-	&and(	$t,		"0xff"	);
-	 &xor(	$L,		&DWP("0x600",$trans,$tmp1,0));
-	 &xor(	$L,		&DWP("0x700",$trans,$tmp2,0));
-	&mov(	$tmp2,		&wparam(1)	);
-	 &xor(	$L,		&DWP("0x400",$trans,$u,0));
-	 &xor(	$L,		&DWP("0x500",$trans,$t,0));
-	}
-
-sub n2a
-	{
-	sprintf("%d",$_[0]);
-	}
-
-# now has a side affect of rotating $a by $shift
-sub R_PERM_OP
-	{
-	local($a,$b,$tt,$shift,$mask,$last)=@_;
-
-	&rotl(	$a,		$shift		) if ($shift != 0);
-	&mov(	$tt,		$a		);
-	&xor(	$a,		$b		);
-	&and(	$a,		$mask		);
-	# This can never succeed, and besides it is difficult to see what the
-	# idea was - Ben 13 Feb 99
-	if (!$last eq $b)
-		{
-		&xor(	$b,		$a		);
-		&xor(	$tt,		$a		);
-		}
-	else
-		{
-		&xor(	$tt,		$a		);
-		&xor(	$b,		$a		);
-		}
-	&comment("");
-	}
-
-sub IP_new
-	{
-	local($l,$r,$tt,$lr)=@_;
-
-	&R_PERM_OP($l,$r,$tt, 4,"0xf0f0f0f0",$l);
-	&R_PERM_OP($r,$tt,$l,20,"0xfff0000f",$l);
-	&R_PERM_OP($l,$tt,$r,14,"0x33333333",$r);
-	&R_PERM_OP($tt,$r,$l,22,"0x03fc03fc",$r);
-	&R_PERM_OP($l,$r,$tt, 9,"0xaaaaaaaa",$r);
-	
-	if ($lr != 3)
-		{
-		if (($lr-3) < 0)
-			{ &rotr($tt,	3-$lr); }
-		else	{ &rotl($tt,	$lr-3); }
-		}
-	if ($lr != 2)
-		{
-		if (($lr-2) < 0)
-			{ &rotr($r,	2-$lr); }
-		else	{ &rotl($r,	$lr-2); }
-		}
-	}
-
-sub FP_new
-	{
-	local($l,$r,$tt,$lr)=@_;
-
-	if ($lr != 2)
-		{
-		if (($lr-2) < 0)
-			{ &rotl($r,	2-$lr); }
-		else	{ &rotr($r,	$lr-2); }
-		}
-	if ($lr != 3)
-		{
-		if (($lr-3) < 0)
-			{ &rotl($l,	3-$lr); }
-		else	{ &rotr($l,	$lr-3); }
-		}
-
-	&R_PERM_OP($l,$r,$tt, 0,"0xaaaaaaaa",$r);
-	&R_PERM_OP($tt,$r,$l,23,"0x03fc03fc",$r);
-	&R_PERM_OP($l,$r,$tt,10,"0x33333333",$l);
-	&R_PERM_OP($r,$tt,$l,18,"0xfff0000f",$l);
-	&R_PERM_OP($l,$tt,$r,12,"0xf0f0f0f0",$r);
-	&rotr($tt	, 4);
-	}
-
diff --git a/crypto/openssl/crypto/des/asm/des686.pl b/crypto/openssl/crypto/des/asm/des686.pl
deleted file mode 100644
index d3ad5d5edd5f..000000000000
--- a/crypto/openssl/crypto/des/asm/des686.pl
+++ /dev/null
@@ -1,230 +0,0 @@
-#!/usr/local/bin/perl
-
-$prog="des686.pl";
-
-# base code is in microsft
-# op dest, source
-# format.
-#
-
-# WILL NOT WORK ANYMORE WITH desboth.pl
-require "desboth.pl";
-
-if (	($ARGV[0] eq "elf"))
-	{ require "x86unix.pl"; }
-elsif (	($ARGV[0] eq "a.out"))
-	{ $aout=1; require "x86unix.pl"; }
-elsif (	($ARGV[0] eq "sol"))
-	{ $sol=1; require "x86unix.pl"; }
-elsif ( ($ARGV[0] eq "cpp"))
-	{ $cpp=1; require "x86unix.pl"; }
-elsif (	($ARGV[0] eq "win32"))
-	{ require "x86ms.pl"; }
-else
-	{
-	print STDERR <<"EOF";
-Pick one target type from
-	elf	- linux, FreeBSD etc
-	a.out	- old linux
-	sol	- x86 solaris
-	cpp	- format so x86unix.cpp can be used
-	win32	- Windows 95/Windows NT
-EOF
-	exit(1);
-	}
-
-&comment("Don't even think of reading this code");
-&comment("It was automatically generated by $prog");
-&comment("Which is a perl program used to generate the x86 assember for");
-&comment("any of elf, a.out, Win32, or Solaris");
-&comment("It can be found in SSLeay 0.6.5+ or in libdes 3.26+");
-&comment("eric <eay\@cryptsoft.com>");
-&comment("");
-
-&file("dx86xxxx");
-
-$L="edi";
-$R="esi";
-
-&DES_encrypt("DES_encrypt1",1);
-&DES_encrypt("DES_encrypt2",0);
-
-&DES_encrypt3("DES_encrypt3",1);
-&DES_encrypt3("DES_decrypt3",0);
-
-&file_end();
-
-sub DES_encrypt
-	{
-	local($name,$do_ip)=@_;
-
-	&function_begin($name,"EXTRN   _DES_SPtrans:DWORD");
-
-	&comment("");
-	&comment("Load the 2 words");
-	&mov("eax",&wparam(0));
-	&mov($L,&DWP(0,"eax","",0));
-	&mov($R,&DWP(4,"eax","",0));
-
-	$ksp=&wparam(1);
-
-	if ($do_ip)
-		{
-		&comment("");
-		&comment("IP");
-		&IP_new($L,$R,"eax");
-		}
-
-	&comment("");
-	&comment("fixup rotate");
-	&rotl($R,3);
-	&rotl($L,3);
-	&exch($L,$R);
-
-	&comment("");
-	&comment("load counter, key_schedule and enc flag");
-	&mov("eax",&wparam(2));	# get encrypt flag
-	&mov("ebp",&wparam(1));	# get ks
-	&cmp("eax","0");
-	&je(&label("start_decrypt"));
-
-	# encrypting part
-
-	for ($i=0; $i<16; $i+=2)
-		{
-		&comment("");
-		&comment("Round $i");
-		&D_ENCRYPT($L,$R,$i*2,"ebp","DES_SPtrans","ecx","edx","eax","ebx");
-
-		&comment("");
-		&comment("Round ".sprintf("%d",$i+1));
-		&D_ENCRYPT($R,$L,($i+1)*2,"ebp","DES_SPtrans","ecx","edx","eax","ebx");
-		}
-	&jmp(&label("end"));
-
-	&set_label("start_decrypt");
-
-	for ($i=15; $i>0; $i-=2)
-		{
-		&comment("");
-		&comment("Round $i");
-		&D_ENCRYPT($L,$R,$i*2,"ebp","DES_SPtrans","ecx","edx","eax","ebx");
-		&comment("");
-		&comment("Round ".sprintf("%d",$i-1));
-		&D_ENCRYPT($R,$L,($i-1)*2,"ebp","DES_SPtrans","ecx","edx","eax","ebx");
-		}
-
-	&set_label("end");
-
-	&comment("");
-	&comment("Fixup");
-	&rotr($L,3);		# r
-	&rotr($R,3);		# l
-
-	if ($do_ip)
-		{
-		&comment("");
-		&comment("FP");
-		&FP_new($R,$L,"eax");
-		}
-
-	&mov("eax",&wparam(0));
-	&mov(&DWP(0,"eax","",0),$L);
-	&mov(&DWP(4,"eax","",0),$R);
-
-	&function_end($name);
-	}
-
-
-# The logic is to load R into 2 registers and operate on both at the same time.
-# We also load the 2 R's into 2 more registers so we can do the 'move word down a byte'
-# while also masking the other copy and doing a lookup.  We then also accumulate the
-# L value in 2 registers then combine them at the end.
-sub D_ENCRYPT
-	{
-	local($L,$R,$S,$ks,$desSP,$u,$t,$tmp1,$tmp2,$tmp3)=@_;
-
-	&mov(	$u,		&DWP(&n2a($S*4),$ks,"",0));
-	&mov(	$t,		&DWP(&n2a(($S+1)*4),$ks,"",0));
-	&xor(	$u,		$R		);
-	&xor(	$t,		$R		);
-	&rotr(	$t,		4		);
-
-	# the numbers at the end of the line are origional instruction order
-	&mov(	$tmp2,		$u		);			# 1 2
-	&mov(	$tmp1,		$t		);			# 1 1
-	&and(	$tmp2,		"0xfc"		);			# 1 4
-	&and(	$tmp1,		"0xfc"		);			# 1 3
-	&shr(	$t,		8		);			# 1 5
-	&xor(	$L,		&DWP("0x100+$desSP",$tmp1,"",0));	# 1 7
-	&shr(	$u,		8		);			# 1 6
-	&mov(	$tmp1,		&DWP("      $desSP",$tmp2,"",0));	# 1 8
-
-	&mov(	$tmp2,		$u		);			# 2 2
-	&xor(	$L,		$tmp1		);			# 1 9
-	&and(	$tmp2,		"0xfc"		);			# 2 4
-	&mov(	$tmp1,		$t		);			# 2 1
-	&and(	$tmp1,		"0xfc"		);			# 2 3
-	&shr(	$t,		8		);			# 2 5
-	&xor(	$L,		&DWP("0x300+$desSP",$tmp1,"",0));	# 2 7
-	&shr(	$u,		8		);			# 2 6
-	&mov(	$tmp1,		&DWP("0x200+$desSP",$tmp2,"",0));	# 2 8
-	&mov(	$tmp2,		$u		);			# 3 2
-
-	&xor(	$L,		$tmp1		);			# 2 9
-	&and(	$tmp2,		"0xfc"		);			# 3 4
-
-	&mov(	$tmp1,		$t		);			# 3 1 
-	&shr(	$u,		8		);			# 3 6
-	&and(	$tmp1,		"0xfc"		);			# 3 3
-	&shr(	$t,		8		);			# 3 5
-	&xor(	$L,		&DWP("0x500+$desSP",$tmp1,"",0));	# 3 7
-	&mov(	$tmp1,		&DWP("0x400+$desSP",$tmp2,"",0));	# 3 8
-
-	&and(	$t,		"0xfc"		);			# 4 1
-	&xor(	$L,		$tmp1		);			# 3 9
-
-	&and(	$u,		"0xfc"		);			# 4 2
-	&xor(	$L,		&DWP("0x700+$desSP",$t,"",0));		# 4 3
-	&xor(	$L,		&DWP("0x600+$desSP",$u,"",0));		# 4 4
-	}
-
-sub PERM_OP
-	{
-	local($a,$b,$tt,$shift,$mask)=@_;
-
-	&mov(	$tt,		$a		);
-	&shr(	$tt,		$shift		);
-	&xor(	$tt,		$b		);
-	&and(	$tt,		$mask		);
-	&xor(	$b,		$tt		);
-	&shl(	$tt,		$shift		);
-	&xor(	$a,		$tt		);
-	}
-
-sub IP_new
-	{
-	local($l,$r,$tt)=@_;
-
-	&PERM_OP($r,$l,$tt, 4,"0x0f0f0f0f");
-	&PERM_OP($l,$r,$tt,16,"0x0000ffff");
-	&PERM_OP($r,$l,$tt, 2,"0x33333333");
-	&PERM_OP($l,$r,$tt, 8,"0x00ff00ff");
-	&PERM_OP($r,$l,$tt, 1,"0x55555555");
-	}
-
-sub FP_new
-	{
-	local($l,$r,$tt)=@_;
-
-	&PERM_OP($l,$r,$tt, 1,"0x55555555");
-        &PERM_OP($r,$l,$tt, 8,"0x00ff00ff");
-        &PERM_OP($l,$r,$tt, 2,"0x33333333");
-        &PERM_OP($r,$l,$tt,16,"0x0000ffff");
-        &PERM_OP($l,$r,$tt, 4,"0x0f0f0f0f");
-	}
-
-sub n2a
-	{
-	sprintf("%d",$_[0]);
-	}
diff --git a/crypto/openssl/crypto/des/asm/des_enc.m4 b/crypto/openssl/crypto/des/asm/des_enc.m4
deleted file mode 100644
index f5b1928f99c4..000000000000
--- a/crypto/openssl/crypto/des/asm/des_enc.m4
+++ /dev/null
@@ -1,1980 +0,0 @@
-!  des_enc.m4
-!  des_enc.S  (generated from des_enc.m4)
-!
-!  UltraSPARC assembler version of the LibDES/SSLeay/OpenSSL des_enc.c file.
-!
-!  Version 1.0. 32-bit version.
-!
-!  June 8, 2000.
-!
-!  Version 2.0. 32/64-bit, PIC-ification, blended CPU adaptation
-!		by Andy Polyakov.
-!
-!  January 1, 2003.
-!
-!  Assembler version: Copyright Svend Olaf Mikkelsen.
-!
-!  Original C code: Copyright Eric A. Young.
-!
-!  This code can be freely used by LibDES/SSLeay/OpenSSL users.
-!
-!  The LibDES/SSLeay/OpenSSL copyright notices must be respected.
-!
-!  This version can be redistributed.
-!
-!  To expand the m4 macros: m4 -B 8192 des_enc.m4 > des_enc.S
-!
-!  Global registers 1 to 5 are used. This is the same as done by the
-!  cc compiler. The UltraSPARC load/store little endian feature is used.
-!
-!  Instruction grouping often refers to one CPU cycle.
-!
-!  Assemble through gcc: gcc -c -mcpu=ultrasparc -o des_enc.o des_enc.S
-!
-!  Assemble through cc:  cc -c -xarch=v8plusa -o des_enc.o des_enc.S
-!
-!  Performance improvement according to './apps/openssl speed des'
-!
-!	32-bit build:
-!		23%  faster than cc-5.2 -xarch=v8plus -xO5
-!		115% faster than gcc-3.2.1 -m32 -mcpu=ultrasparc -O5
-!	64-bit build:
-!		50%  faster than cc-5.2 -xarch=v9 -xO5
-!		100% faster than gcc-3.2.1 -m64 -mcpu=ultrasparc -O5
-!
-
-.ident "des_enc.m4 2.1"
-
-#if defined(__SUNPRO_C) && defined(__sparcv9)
-# define ABI64  /* They've said -xarch=v9 at command line */
-#elif defined(__GNUC__) && defined(__arch64__)
-# define ABI64  /* They've said -m64 at command line */
-#endif
-
-#ifdef ABI64
-  .register	%g2,#scratch
-  .register	%g3,#scratch
-# define	FRAME	-192
-# define	BIAS	2047
-# define	LDPTR	ldx
-# define	STPTR	stx
-# define	ARG0	128
-# define	ARGSZ	8
-# ifndef OPENSSL_SYSNAME_ULTRASPARC
-# define OPENSSL_SYSNAME_ULTRASPARC
-# endif
-#else
-# define	FRAME	-96
-# define	BIAS	0
-# define	LDPTR	ld
-# define	STPTR	st
-# define	ARG0	68
-# define	ARGSZ	4
-#endif
-
-#define LOOPS 7
-
-#define global0 %g0
-#define global1 %g1
-#define global2 %g2
-#define global3 %g3
-#define global4 %g4
-#define global5 %g5
-
-#define local0 %l0
-#define local1 %l1
-#define local2 %l2
-#define local3 %l3
-#define local4 %l4
-#define local5 %l5
-#define local7 %l6
-#define local6 %l7
-
-#define in0 %i0
-#define in1 %i1
-#define in2 %i2
-#define in3 %i3
-#define in4 %i4
-#define in5 %i5
-#define in6 %i6
-#define in7 %i7
-
-#define out0 %o0
-#define out1 %o1
-#define out2 %o2
-#define out3 %o3
-#define out4 %o4
-#define out5 %o5
-#define out6 %o6
-#define out7 %o7
-
-#define stub stb
-
-changequote({,})
-
-
-! Macro definitions:
-
-
-! {ip_macro}
-!
-! The logic used in initial and final permutations is the same as in
-! the C code. The permutations are done with a clever shift, xor, and
-! technique.
-!
-! The macro also loads address sbox 1 to 5 to global 1 to 5, address
-! sbox 6 to local6, and addres sbox 8 to out3.
-!
-! Rotates the halfs 3 left to bring the sbox bits in convenient positions.
-!
-! Loads key first round from address in parameter 5 to out0, out1.
-!
-! After the the original LibDES initial permutation, the resulting left
-! is in the variable initially used for right and vice versa. The macro
-! implements the possibility to keep the halfs in the original registers.
-!
-! parameter 1  left
-! parameter 2  right
-! parameter 3  result left (modify in first round)
-! parameter 4  result right (use in first round)
-! parameter 5  key address
-! parameter 6  1/2 for include encryption/decryption
-! parameter 7  1 for move in1 to in3
-! parameter 8  1 for move in3 to in4, 2 for move in4 to in3
-! parameter 9  1 for load ks3 and ks2 to in4 and in3
-
-define(ip_macro, {
-
-! {ip_macro}
-! $1 $2 $4 $3 $5 $6 $7 $8 $9
-
-	ld	[out2+256], local1
-	srl	$2, 4, local4
-
-	xor	local4, $1, local4
-	ifelse($7,1,{mov in1, in3},{nop})
-
-	ld	[out2+260], local2
-	and	local4, local1, local4
-	ifelse($8,1,{mov in3, in4},{})
-	ifelse($8,2,{mov in4, in3},{})
-
-	ld	[out2+280], out4          ! loop counter
-	sll	local4, 4, local1
-	xor	$1, local4, $1
-
-	ld	[out2+264], local3
-	srl	$1, 16, local4
-	xor	$2, local1, $2
-
-	ifelse($9,1,{LDPTR	KS3, in4},{})
-	xor	local4, $2, local4
-	nop	!sethi	%hi(DES_SPtrans), global1 ! sbox addr
-
-	ifelse($9,1,{LDPTR	KS2, in3},{})
-	and	local4, local2, local4
-	nop	!or	global1, %lo(DES_SPtrans), global1   ! sbox addr
-
-	sll	local4, 16, local1
-	xor	$2, local4, $2
-
-	srl	$2, 2, local4
-	xor	$1, local1, $1
-
-	sethi	%hi(16711680), local5
-	xor	local4, $1, local4
-
-	and	local4, local3, local4
-	or	local5, 255, local5
-
-	sll	local4, 2, local2
-	xor	$1, local4, $1
-
-	srl	$1, 8, local4
-	xor	$2, local2, $2
-
-	xor	local4, $2, local4
-	add	global1, 768, global4
-
-	and	local4, local5, local4
-	add	global1, 1024, global5
-
-	ld	[out2+272], local7
-	sll	local4, 8, local1
-	xor	$2, local4, $2
-
-	srl	$2, 1, local4
-	xor	$1, local1, $1
-
-	ld	[$5], out0                ! key 7531
-	xor	local4, $1, local4
-	add	global1, 256, global2
-
-	ld	[$5+4], out1              ! key 8642
-	and	local4, local7, local4
-	add	global1, 512, global3
-
-	sll	local4, 1, local1
-	xor	$1, local4, $1
-
-	sll	$1, 3, local3
-	xor	$2, local1, $2
-
-	sll	$2, 3, local2
-	add	global1, 1280, local6     ! address sbox 8
-
-	srl	$1, 29, local4
-	add	global1, 1792, out3       ! address sbox 8
-
-	srl	$2, 29, local1
-	or	local4, local3, $4
-
-	or	local2, local1, $3
-
-	ifelse($6, 1, {
-
-		ld	[out2+284], local5     ! 0x0000FC00 used in the rounds
-		or	local2, local1, $3
-		xor	$4, out0, local1
-
-		call .des_enc.1
-		and	local1, 252, local1
-
-	},{})
-
-	ifelse($6, 2, {
-
-		ld	[out2+284], local5     ! 0x0000FC00 used in the rounds
-		or	local2, local1, $3
-		xor	$4, out0, local1
-
-		call .des_dec.1
-		and	local1, 252, local1
-
-	},{})
-})
-
-
-! {rounds_macro}
-!
-! The logic used in the DES rounds is the same as in the C code,
-! except that calculations for sbox 1 and sbox 5 begin before
-! the previous round is finished.
-!
-! In each round one half (work) is modified based on key and the
-! other half (use).
-!
-! In this version we do two rounds in a loop repeated 7 times
-! and two rounds seperately.
-!
-! One half has the bits for the sboxes in the following positions:
-!
-!	777777xx555555xx333333xx111111xx
-!
-!	88xx666666xx444444xx222222xx8888
-!
-! The bits for each sbox are xor-ed with the key bits for that box.
-! The above xx bits are cleared, and the result used for lookup in
-! the sbox table. Each sbox entry contains the 4 output bits permuted
-! into 32 bits according to the P permutation.
-!
-! In the description of DES, left and right are switched after
-! each round, except after last round. In this code the original
-! left and right are kept in the same register in all rounds, meaning
-! that after the 16 rounds the result for right is in the register
-! originally used for left.
-!
-! parameter 1  first work (left in first round)
-! parameter 2  first use (right in first round)
-! parameter 3  enc/dec  1/-1
-! parameter 4  loop label
-! parameter 5  key address register
-! parameter 6  optional address for key next encryption/decryption
-! parameter 7  not empty for include retl
-!
-! also compares in2 to 8
-
-define(rounds_macro, {
-
-! {rounds_macro}
-! $1 $2 $3 $4 $5 $6 $7 $8 $9
-
-	xor	$2, out0, local1
-
-	ld	[out2+284], local5        ! 0x0000FC00
-	ba	$4
-	and	local1, 252, local1
-
-	.align 32
-
-$4:
-	! local6 is address sbox 6
-	! out3   is address sbox 8
-	! out4   is loop counter
-
-	ld	[global1+local1], local1
-	xor	$2, out1, out1            ! 8642
-	xor	$2, out0, out0            ! 7531
-	fmovs	%f0, %f0                  ! fxor used for alignment
-
-	srl	out1, 4, local0           ! rotate 4 right
-	and	out0, local5, local3      ! 3
-	fmovs	%f0, %f0
-
-	ld	[$5+$3*8], local7         ! key 7531 next round
-	srl	local3, 8, local3         ! 3
-	and	local0, 252, local2       ! 2
-	fmovs	%f0, %f0
-
-	ld	[global3+local3],local3   ! 3
-	sll	out1, 28, out1            ! rotate
-	xor	$1, local1, $1            ! 1 finished, local1 now sbox 7
-
-	ld	[global2+local2], local2  ! 2 
-	srl	out0, 24, local1          ! 7
-	or	out1, local0, out1        ! rotate
-
-	ldub	[out2+local1], local1     ! 7 (and 0xFC)
-	srl	out1, 24, local0          ! 8
-	and	out1, local5, local4      ! 4
-
-	ldub	[out2+local0], local0     ! 8 (and 0xFC)
-	srl	local4, 8, local4         ! 4
-	xor	$1, local2, $1            ! 2 finished local2 now sbox 6
-
-	ld	[global4+local4],local4   ! 4
-	srl	out1, 16, local2          ! 6
-	xor	$1, local3, $1            ! 3 finished local3 now sbox 5
-
-	ld	[out3+local0],local0      ! 8
-	and	local2, 252, local2       ! 6
-	add	global1, 1536, local5     ! address sbox 7
-
-	ld	[local6+local2], local2   ! 6
-	srl	out0, 16, local3          ! 5
-	xor	$1, local4, $1            ! 4 finished
-
-	ld	[local5+local1],local1    ! 7
-	and	local3, 252, local3       ! 5
-	xor	$1, local0, $1            ! 8 finished
-
-	ld	[global5+local3],local3   ! 5
-	xor	$1, local2, $1            ! 6 finished
-	subcc	out4, 1, out4
-
-	ld	[$5+$3*8+4], out0         ! key 8642 next round
-	xor	$1, local7, local2        ! sbox 5 next round
-	xor	$1, local1, $1            ! 7 finished
-
-	srl	local2, 16, local2        ! sbox 5 next round
-	xor	$1, local3, $1            ! 5 finished
-
-	ld	[$5+$3*16+4], out1        ! key 8642 next round again
-	and	local2, 252, local2       ! sbox5 next round
-! next round
-	xor	$1, local7, local7        ! 7531
-
-	ld	[global5+local2], local2  ! 5
-	srl	local7, 24, local3        ! 7
-	xor	$1, out0, out0            ! 8642
-
-	ldub	[out2+local3], local3     ! 7 (and 0xFC)
-	srl	out0, 4, local0           ! rotate 4 right
-	and	local7, 252, local1       ! 1
-
-	sll	out0, 28, out0            ! rotate
-	xor	$2, local2, $2            ! 5 finished local2 used
-
-	srl	local0, 8, local4         ! 4
-	and	local0, 252, local2       ! 2
-	ld	[local5+local3], local3   ! 7
-
-	srl	local0, 16, local5        ! 6
-	or	out0, local0, out0        ! rotate
-	ld	[global2+local2], local2  ! 2
-
-	srl	out0, 24, local0
-	ld	[$5+$3*16], out0          ! key 7531 next round
-	and	local4, 252, local4	  ! 4
-
-	and	local5, 252, local5       ! 6
-	ld	[global4+local4], local4  ! 4
-	xor	$2, local3, $2            ! 7 finished local3 used
-
-	and	local0, 252, local0       ! 8
-	ld	[local6+local5], local5   ! 6
-	xor	$2, local2, $2            ! 2 finished local2 now sbox 3
-
-	srl	local7, 8, local2         ! 3 start
-	ld	[out3+local0], local0     ! 8
-	xor	$2, local4, $2            ! 4 finished
-
-	and	local2, 252, local2       ! 3
-	ld	[global1+local1], local1  ! 1
-	xor	$2, local5, $2            ! 6 finished local5 used
-
-	ld	[global3+local2], local2  ! 3
-	xor	$2, local0, $2            ! 8 finished
-	add	$5, $3*16, $5             ! enc add 8, dec add -8 to key pointer
-
-	ld	[out2+284], local5        ! 0x0000FC00
-	xor	$2, out0, local4          ! sbox 1 next round
-	xor	$2, local1, $2            ! 1 finished
-
-	xor	$2, local2, $2            ! 3 finished
-#ifdef OPENSSL_SYSNAME_ULTRASPARC
-	bne,pt	%icc, $4
-#else
-	bne	$4
-#endif
-	and	local4, 252, local1       ! sbox 1 next round
-
-! two rounds more:
-
-	ld	[global1+local1], local1
-	xor	$2, out1, out1
-	xor	$2, out0, out0
-
-	srl	out1, 4, local0           ! rotate
-	and	out0, local5, local3
-
-	ld	[$5+$3*8], local7         ! key 7531
-	srl	local3, 8, local3
-	and	local0, 252, local2
-
-	ld	[global3+local3],local3
-	sll	out1, 28, out1            ! rotate
-	xor	$1, local1, $1            ! 1 finished, local1 now sbox 7
-
-	ld	[global2+local2], local2
-	srl	out0, 24, local1
-	or	out1, local0, out1        ! rotate
-
-	ldub	[out2+local1], local1
-	srl	out1, 24, local0
-	and	out1, local5, local4
-
-	ldub	[out2+local0], local0
-	srl	local4, 8, local4
-	xor	$1, local2, $1            ! 2 finished local2 now sbox 6
-
-	ld	[global4+local4],local4
-	srl	out1, 16, local2
-	xor	$1, local3, $1            ! 3 finished local3 now sbox 5
-
-	ld	[out3+local0],local0
-	and	local2, 252, local2
-	add	global1, 1536, local5     ! address sbox 7
-
-	ld	[local6+local2], local2
-	srl	out0, 16, local3
-	xor	$1, local4, $1            ! 4 finished
-
-	ld	[local5+local1],local1
-	and	local3, 252, local3
-	xor	$1, local0, $1
-
-	ld	[global5+local3],local3
-	xor	$1, local2, $1            ! 6 finished
-	cmp	in2, 8
-
-	ifelse($6,{}, {}, {ld	[out2+280], out4})  ! loop counter
-	xor	$1, local7, local2        ! sbox 5 next round
-	xor	$1, local1, $1            ! 7 finished
-
-	ld	[$5+$3*8+4], out0
-	srl	local2, 16, local2        ! sbox 5 next round
-	xor	$1, local3, $1            ! 5 finished
-
-	and	local2, 252, local2
-! next round (two rounds more)
-	xor	$1, local7, local7        ! 7531
-
-	ld	[global5+local2], local2
-	srl	local7, 24, local3
-	xor	$1, out0, out0            ! 8642
-
-	ldub	[out2+local3], local3
-	srl	out0, 4, local0           ! rotate
-	and	local7, 252, local1
-
-	sll	out0, 28, out0            ! rotate
-	xor	$2, local2, $2            ! 5 finished local2 used
-
-	srl	local0, 8, local4
-	and	local0, 252, local2
-	ld	[local5+local3], local3
-
-	srl	local0, 16, local5
-	or	out0, local0, out0        ! rotate
-	ld	[global2+local2], local2
-
-	srl	out0, 24, local0
-	ifelse($6,{}, {}, {ld	[$6], out0})   ! key next encryption/decryption
-	and	local4, 252, local4
-
-	and	local5, 252, local5
-	ld	[global4+local4], local4
-	xor	$2, local3, $2            ! 7 finished local3 used
-
-	and	local0, 252, local0
-	ld	[local6+local5], local5
-	xor	$2, local2, $2            ! 2 finished local2 now sbox 3
-
-	srl	local7, 8, local2         ! 3 start
-	ld	[out3+local0], local0
-	xor	$2, local4, $2
-
-	and	local2, 252, local2
-	ld	[global1+local1], local1
-	xor	$2, local5, $2            ! 6 finished local5 used
-
-	ld	[global3+local2], local2
-	srl	$1, 3, local3
-	xor	$2, local0, $2
-
-	ifelse($6,{}, {}, {ld	[$6+4], out1}) ! key next encryption/decryption
-	sll	$1, 29, local4
-	xor	$2, local1, $2
-
-	ifelse($7,{}, {}, {retl})
-	xor	$2, local2, $2
-})
-
-
-! {fp_macro}
-!
-!  parameter 1   right (original left)
-!  parameter 2   left (original right)
-!  parameter 3   1 for optional store to [in0]
-!  parameter 4   1 for load input/output address to local5/7
-!
-!  The final permutation logic switches the halfes, meaning that
-!  left and right ends up the the registers originally used.
-
-define(fp_macro, {
-
-! {fp_macro}
-! $1 $2 $3 $4 $5 $6 $7 $8 $9
-
-	! initially undo the rotate 3 left done after initial permutation
-	! original left is received shifted 3 right and 29 left in local3/4
-
-	sll	$2, 29, local1
-	or	local3, local4, $1
-
-	srl	$2, 3, $2
-	sethi	%hi(0x55555555), local2
-
-	or	$2, local1, $2
-	or	local2, %lo(0x55555555), local2
-
-	srl	$2, 1, local3
-	sethi	%hi(0x00ff00ff), local1
-	xor	local3, $1, local3
-	or	local1, %lo(0x00ff00ff), local1
-	and	local3, local2, local3
-	sethi	%hi(0x33333333), local4
-	sll	local3, 1, local2
-
-	xor	$1, local3, $1
-
-	srl	$1, 8, local3
-	xor	$2, local2, $2
-	xor	local3, $2, local3
-	or	local4, %lo(0x33333333), local4
-	and	local3, local1, local3
-	sethi	%hi(0x0000ffff), local1
-	sll	local3, 8, local2
-
-	xor	$2, local3, $2
-
-	srl	$2, 2, local3
-	xor	$1, local2, $1
-	xor	local3, $1, local3
-	or	local1, %lo(0x0000ffff), local1
-	and	local3, local4, local3
-	sethi	%hi(0x0f0f0f0f), local4
-	sll	local3, 2, local2
-
-	ifelse($4,1, {LDPTR INPUT, local5})
-	xor	$1, local3, $1
-
-	ifelse($4,1, {LDPTR OUTPUT, local7})
-	srl	$1, 16, local3
-	xor	$2, local2, $2
-	xor	local3, $2, local3
-	or	local4, %lo(0x0f0f0f0f), local4
-	and	local3, local1, local3
-	sll	local3, 16, local2
-
-	xor	$2, local3, local1
-
-	srl	local1, 4, local3
-	xor	$1, local2, $1
-	xor	local3, $1, local3
-	and	local3, local4, local3
-	sll	local3, 4, local2
-
-	xor	$1, local3, $1
-
-	! optional store:
-
-	ifelse($3,1, {st $1, [in0]})
-
-	xor	local1, local2, $2
-
-	ifelse($3,1, {st $2, [in0+4]})
-
-})
-
-
-! {fp_ip_macro}
-!
-! Does initial permutation for next block mixed with
-! final permutation for current block.
-!
-! parameter 1   original left
-! parameter 2   original right
-! parameter 3   left ip
-! parameter 4   right ip
-! parameter 5   1: load ks1/ks2 to in3/in4, add 120 to in4
-!                2: mov in4 to in3
-!
-! also adds -8 to length in2 and loads loop counter to out4
-
-define(fp_ip_macro, {
-
-! {fp_ip_macro}
-! $1 $2 $3 $4 $5 $6 $7 $8 $9
-
-	define({temp1},{out4})
-	define({temp2},{local3})
-
-	define({ip1},{local1})
-	define({ip2},{local2})
-	define({ip4},{local4})
-	define({ip5},{local5})
-
-	! $1 in local3, local4
-
-	ld	[out2+256], ip1
-	sll	out5, 29, temp1
-	or	local3, local4, $1
-
-	srl	out5, 3, $2
-	ifelse($5,2,{mov in4, in3})
-
-	ld	[out2+272], ip5
-	srl	$4, 4, local0
-	or	$2, temp1, $2
-
-	srl	$2, 1, temp1
-	xor	temp1, $1, temp1
-
-	and	temp1, ip5, temp1
-	xor	local0, $3, local0
-
-	sll	temp1, 1, temp2
-	xor	$1, temp1, $1
-
-	and	local0, ip1, local0
-	add	in2, -8, in2
-
-	sll	local0, 4, local7
-	xor	$3, local0, $3
-
-	ld	[out2+268], ip4
-	srl	$1, 8, temp1
-	xor	$2, temp2, $2
-	ld	[out2+260], ip2
-	srl	$3, 16, local0
-	xor	$4, local7, $4
-	xor	temp1, $2, temp1
-	xor	local0, $4, local0
-	and	temp1, ip4, temp1
-	and	local0, ip2, local0
-	sll	temp1, 8, temp2
-	xor	$2, temp1, $2
-	sll	local0, 16, local7
-	xor	$4, local0, $4
-
-	srl	$2, 2, temp1
-	xor	$1, temp2, $1
-
-	ld	[out2+264], temp2         ! ip3
-	srl	$4, 2, local0
-	xor	$3, local7, $3
-	xor	temp1, $1, temp1
-	xor	local0, $3, local0
-	and	temp1, temp2, temp1
-	and	local0, temp2, local0
-	sll	temp1, 2, temp2
-	xor	$1, temp1, $1
-	sll	local0, 2, local7
-	xor	$3, local0, $3
-
-	srl	$1, 16, temp1
-	xor	$2, temp2, $2
-	srl	$3, 8, local0
-	xor	$4, local7, $4
-	xor	temp1, $2, temp1
-	xor	local0, $4, local0
-	and	temp1, ip2, temp1
-	and	local0, ip4, local0
-	sll	temp1, 16, temp2
-	xor	$2, temp1, local4
-	sll	local0, 8, local7
-	xor	$4, local0, $4
-
-	srl	$4, 1, local0
-	xor	$3, local7, $3
-
-	srl	local4, 4, temp1
-	xor	local0, $3, local0
-
-	xor	$1, temp2, $1
-	and	local0, ip5, local0
-
-	sll	local0, 1, local7
-	xor	temp1, $1, temp1
-
-	xor	$3, local0, $3
-	xor	$4, local7, $4
-
-	sll	$3, 3, local5
-	and	temp1, ip1, temp1
-
-	sll	temp1, 4, temp2
-	xor	$1, temp1, $1
-
-	ifelse($5,1,{LDPTR	KS2, in4})
-	sll	$4, 3, local2
-	xor	local4, temp2, $2
-
-	! reload since used as temporar:
-
-	ld	[out2+280], out4          ! loop counter
-
-	srl	$3, 29, local0
-	ifelse($5,1,{add in4, 120, in4})
-
-	ifelse($5,1,{LDPTR	KS1, in3})
-	srl	$4, 29, local7
-
-	or	local0, local5, $4
-	or	local2, local7, $3
-
-})
-
-
-
-! {load_little_endian}
-!
-! parameter 1  address
-! parameter 2  destination left
-! parameter 3  destination right
-! parameter 4  temporar
-! parameter 5  label
-
-define(load_little_endian, {
-
-! {load_little_endian}
-! $1 $2 $3 $4 $5 $6 $7 $8 $9
-
-	! first in memory to rightmost in register
-
-#ifdef OPENSSL_SYSNAME_ULTRASPARC
-	andcc	$1, 3, global0
-	bne,pn	%icc, $5
-	nop
-
-	lda	[$1] 0x88, $2
-	add	$1, 4, $4
-
-	ba,pt	%icc, $5a
-	lda	[$4] 0x88, $3
-#endif
-
-$5:
-	ldub	[$1+3], $2
-
-	ldub	[$1+2], $4
-	sll	$2, 8, $2
-	or	$2, $4, $2
-
-	ldub	[$1+1], $4
-	sll	$2, 8, $2
-	or	$2, $4, $2
-
-	ldub	[$1+0], $4
-	sll	$2, 8, $2
-	or	$2, $4, $2
-
-
-	ldub	[$1+3+4], $3
-
-	ldub	[$1+2+4], $4
-	sll	$3, 8, $3
-	or	$3, $4, $3
-
-	ldub	[$1+1+4], $4
-	sll	$3, 8, $3
-	or	$3, $4, $3
-
-	ldub	[$1+0+4], $4
-	sll	$3, 8, $3
-	or	$3, $4, $3
-$5a:
-
-})
-
-
-! {load_little_endian_inc}
-!
-! parameter 1  address
-! parameter 2  destination left
-! parameter 3  destination right
-! parameter 4  temporar
-! parameter 4  label
-!
-! adds 8 to address
-
-define(load_little_endian_inc, {
-
-! {load_little_endian_inc}
-! $1 $2 $3 $4 $5 $6 $7 $8 $9
-
-	! first in memory to rightmost in register
-
-#ifdef OPENSSL_SYSNAME_ULTRASPARC
-	andcc	$1, 3, global0
-	bne,pn	%icc, $5
-	nop
-
-	lda	[$1] 0x88, $2
-	add	$1, 4, $1
-
-	lda	[$1] 0x88, $3
-	ba,pt	%icc, $5a
-	add	$1, 4, $1
-#endif
-
-$5:
-	ldub	[$1+3], $2
-
-	ldub	[$1+2], $4
-	sll	$2, 8, $2
-	or	$2, $4, $2
-
-	ldub	[$1+1], $4
-	sll	$2, 8, $2
-	or	$2, $4, $2
-
-	ldub	[$1+0], $4
-	sll	$2, 8, $2
-	or	$2, $4, $2
-
-	ldub	[$1+3+4], $3
-	add	$1, 8, $1
-
-	ldub	[$1+2+4-8], $4
-	sll	$3, 8, $3
-	or	$3, $4, $3
-
-	ldub	[$1+1+4-8], $4
-	sll	$3, 8, $3
-	or	$3, $4, $3
-
-	ldub	[$1+0+4-8], $4
-	sll	$3, 8, $3
-	or	$3, $4, $3
-$5a:
-
-})
-
-
-! {load_n_bytes}
-!
-! Loads 1 to 7 bytes little endian
-! Remaining bytes are zeroed.
-!
-! parameter 1  address
-! parameter 2  length
-! parameter 3  destination register left
-! parameter 4  destination register right
-! parameter 5  temp
-! parameter 6  temp2
-! parameter 7  label
-! parameter 8  return label
-
-define(load_n_bytes, {
-
-! {load_n_bytes}
-! $1 $2 $5 $6 $7 $8 $7 $8 $9
-
-$7.0:	call	.+8
-	sll	$2, 2, $6
-
-	add	%o7,$7.jmp.table-$7.0,$5
-
-	add	$5, $6, $5
-	mov	0, $4
-
-	ld	[$5], $5
-
-	jmp	%o7+$5
-	mov	0, $3
-
-$7.7:
-	ldub	[$1+6], $5
-	sll	$5, 16, $5
-	or	$3, $5, $3
-$7.6:
-	ldub	[$1+5], $5
-	sll	$5, 8, $5
-	or	$3, $5, $3
-$7.5:
-	ldub	[$1+4], $5
-	or	$3, $5, $3
-$7.4:
-	ldub	[$1+3], $5
-	sll	$5, 24, $5
-	or	$4, $5, $4
-$7.3:
-	ldub	[$1+2], $5
-	sll	$5, 16, $5
-	or	$4, $5, $4
-$7.2:
-	ldub	[$1+1], $5
-	sll	$5, 8, $5
-	or	$4, $5, $4
-$7.1:
-	ldub	[$1+0], $5
-	ba	$8
-	or	$4, $5, $4
-
-	.align 4
-
-$7.jmp.table:
-	.word	0
-	.word	$7.1-$7.0
-	.word	$7.2-$7.0
-	.word	$7.3-$7.0
-	.word	$7.4-$7.0
-	.word	$7.5-$7.0
-	.word	$7.6-$7.0
-	.word	$7.7-$7.0
-})
-
-
-! {store_little_endian}
-!
-! parameter 1  address
-! parameter 2  source left
-! parameter 3  source right
-! parameter 4  temporar
-
-define(store_little_endian, {
-
-! {store_little_endian}
-! $1 $2 $3 $4 $5 $6 $7 $8 $9
-
-	! rightmost in register to first in memory
-
-#ifdef OPENSSL_SYSNAME_ULTRASPARC
-	andcc	$1, 3, global0
-	bne,pn	%icc, $5
-	nop
-
-	sta	$2, [$1] 0x88
-	add	$1, 4, $4
-
-	ba,pt	%icc, $5a
-	sta	$3, [$4] 0x88
-#endif
-
-$5:
-	and	$2, 255, $4
-	stub	$4, [$1+0]
-
-	srl	$2, 8, $4
-	and	$4, 255, $4
-	stub	$4, [$1+1]
-
-	srl	$2, 16, $4
-	and	$4, 255, $4
-	stub	$4, [$1+2]
-
-	srl	$2, 24, $4
-	stub	$4, [$1+3]
-
-
-	and	$3, 255, $4
-	stub	$4, [$1+0+4]
-
-	srl	$3, 8, $4
-	and	$4, 255, $4
-	stub	$4, [$1+1+4]
-
-	srl	$3, 16, $4
-	and	$4, 255, $4
-	stub	$4, [$1+2+4]
-
-	srl	$3, 24, $4
-	stub	$4, [$1+3+4]
-
-$5a:
-
-})
-
-
-! {store_n_bytes}
-!
-! Stores 1 to 7 bytes little endian
-!
-! parameter 1  address
-! parameter 2  length
-! parameter 3  source register left
-! parameter 4  source register right
-! parameter 5  temp
-! parameter 6  temp2
-! parameter 7  label
-! parameter 8  return label
-
-define(store_n_bytes, {
-
-! {store_n_bytes}
-! $1 $2 $5 $6 $7 $8 $7 $8 $9
-
-$7.0:	call	.+8
-	sll	$2, 2, $6
-
-	add	%o7,$7.jmp.table-$7.0,$5
-
-	add	$5, $6, $5
-
-	ld	[$5], $5
-
-	jmp	%o7+$5
-	nop
-
-$7.7:
-	srl	$3, 16, $5
-	and	$5, 0xff, $5
-	stub	$5, [$1+6]
-$7.6:
-	srl	$3, 8, $5
-	and	$5, 0xff, $5
-	stub	$5, [$1+5]
-$7.5:
-	and	$3, 0xff, $5
-	stub	$5, [$1+4]
-$7.4:
-	srl	$4, 24, $5
-	stub	$5, [$1+3]
-$7.3:
-	srl	$4, 16, $5
-	and	$5, 0xff, $5
-	stub	$5, [$1+2]
-$7.2:
-	srl	$4, 8, $5
-	and	$5, 0xff, $5
-	stub	$5, [$1+1]
-$7.1:
-	and	$4, 0xff, $5
-
-
-	ba	$8
-	stub	$5, [$1]
-
-	.align 4
-
-$7.jmp.table:
-
-	.word	0
-	.word	$7.1-$7.0
-	.word	$7.2-$7.0
-	.word	$7.3-$7.0
-	.word	$7.4-$7.0
-	.word	$7.5-$7.0
-	.word	$7.6-$7.0
-	.word	$7.7-$7.0
-})
-
-
-define(testvalue,{1})
-
-define(register_init, {
-
-! For test purposes:
-
-	sethi	%hi(testvalue), local0
-	or	local0, %lo(testvalue), local0
-
-	ifelse($1,{},{}, {mov	local0, $1})
-	ifelse($2,{},{}, {mov	local0, $2})
-	ifelse($3,{},{}, {mov	local0, $3})
-	ifelse($4,{},{}, {mov	local0, $4})
-	ifelse($5,{},{}, {mov	local0, $5})
-	ifelse($6,{},{}, {mov	local0, $6})
-	ifelse($7,{},{}, {mov	local0, $7})
-	ifelse($8,{},{}, {mov	local0, $8})
-
-	mov	local0, local1
-	mov	local0, local2
-	mov	local0, local3
-	mov	local0, local4
-	mov	local0, local5
-	mov	local0, local7
-	mov	local0, local6
-	mov	local0, out0
-	mov	local0, out1
-	mov	local0, out2
-	mov	local0, out3
-	mov	local0, out4
-	mov	local0, out5
-	mov	local0, global1
-	mov	local0, global2
-	mov	local0, global3
-	mov	local0, global4
-	mov	local0, global5
-
-})
-
-.section	".text"
-
-	.align 32
-
-.des_enc:
-
-	! key address in3
-	! loads key next encryption/decryption first round from [in4]
-
-	rounds_macro(in5, out5, 1, .des_enc.1, in3, in4, retl)
-
-
-	.align 32
-
-.des_dec:
-
-	! implemented with out5 as first parameter to avoid
-	! register exchange in ede modes
-
-	! key address in4
-	! loads key next encryption/decryption first round from [in3]
-
-	rounds_macro(out5, in5, -1, .des_dec.1, in4, in3, retl)
-
-
-
-! void DES_encrypt1(data, ks, enc)
-! *******************************
-
-	.align 32
-	.global DES_encrypt1
-	.type	 DES_encrypt1,#function
-
-DES_encrypt1:
-
-	save	%sp, FRAME, %sp
-
-	call	.PIC.me.up
-	mov	.PIC.me.up-(.-4),out0
-
-	ld	[in0], in5                ! left
-	cmp	in2, 0                    ! enc
-
-#ifdef OPENSSL_SYSNAME_ULTRASPARC
-	be,pn	%icc, .encrypt.dec        ! enc/dec
-#else
-	be	.encrypt.dec
-#endif
-	ld	[in0+4], out5             ! right
-
-	! parameter 6  1/2 for include encryption/decryption
-	! parameter 7  1 for move in1 to in3
-	! parameter 8  1 for move in3 to in4, 2 for move in4 to in3
-
-	ip_macro(in5, out5, in5, out5, in3, 0, 1, 1)
-
-	rounds_macro(in5, out5, 1, .des_encrypt1.1, in3, in4) ! in4 not used
-
-	fp_macro(in5, out5, 1)            ! 1 for store to [in0]
-
-	ret
-	restore
-
-.encrypt.dec:
-
-	add	in1, 120, in3             ! use last subkey for first round
-
-	! parameter 6  1/2 for include encryption/decryption
-	! parameter 7  1 for move in1 to in3
-	! parameter 8  1 for move in3 to in4, 2 for move in4 to in3
-
-	ip_macro(in5, out5, out5, in5, in4, 2, 0, 1) ! include dec,  ks in4
-
-	fp_macro(out5, in5, 1)            ! 1 for store to [in0]
-
-	ret
-	restore
-
-.DES_encrypt1.end:
-	.size	 DES_encrypt1,.DES_encrypt1.end-DES_encrypt1
-
-
-! void DES_encrypt2(data, ks, enc)
-!*********************************
-
-	! encrypts/decrypts without initial/final permutation
-
-	.align 32
-	.global DES_encrypt2
-	.type	 DES_encrypt2,#function
-
-DES_encrypt2:
-
-	save	%sp, FRAME, %sp
-
-	call	.PIC.me.up
-	mov	.PIC.me.up-(.-4),out0
-
-	! Set sbox address 1 to 6 and rotate halfs 3 left
-	! Errors caught by destest? Yes. Still? *NO*
-
-	!sethi	%hi(DES_SPtrans), global1 ! address sbox 1
-
-	!or	global1, %lo(DES_SPtrans), global1  ! sbox 1
-
-	add	global1, 256, global2     ! sbox 2
-	add	global1, 512, global3     ! sbox 3
-
-	ld	[in0], out5               ! right
-	add	global1, 768, global4     ! sbox 4
-	add	global1, 1024, global5    ! sbox 5
-
-	ld	[in0+4], in5              ! left
-	add	global1, 1280, local6     ! sbox 6
-	add	global1, 1792, out3       ! sbox 8
-
-	! rotate
-
-	sll	in5, 3, local5
-	mov	in1, in3                  ! key address to in3
-
-	sll	out5, 3, local7
-	srl	in5, 29, in5
-
-	srl	out5, 29, out5
-	add	in5, local5, in5
-
-	add	out5, local7, out5
-	cmp	in2, 0
-
-	! we use our own stackframe
-
-#ifdef OPENSSL_SYSNAME_ULTRASPARC
-	be,pn	%icc, .encrypt2.dec       ! decryption
-#else
-	be	.encrypt2.dec
-#endif
-	STPTR	in0, [%sp+BIAS+ARG0+0*ARGSZ]
-
-	ld	[in3], out0               ! key 7531 first round
-	mov	LOOPS, out4               ! loop counter
-
-	ld	[in3+4], out1             ! key 8642 first round
-	sethi	%hi(0x0000FC00), local5
-
-	call .des_enc
-	mov	in3, in4
-
-	! rotate
-	sll	in5, 29, in0
-	srl	in5, 3, in5
-	sll	out5, 29, in1
-	add	in5, in0, in5
-	srl	out5, 3, out5
-	LDPTR	[%sp+BIAS+ARG0+0*ARGSZ], in0
-	add	out5, in1, out5
-	st	in5, [in0]
-	st	out5, [in0+4]
-
-	ret
-	restore
-
-
-.encrypt2.dec:
-
-	add in3, 120, in4
-
-	ld	[in4], out0               ! key 7531 first round
-	mov	LOOPS, out4               ! loop counter
-
-	ld	[in4+4], out1             ! key 8642 first round
-	sethi	%hi(0x0000FC00), local5
-
-	mov	in5, local1               ! left expected in out5
-	mov	out5, in5
-
-	call .des_dec
-	mov	local1, out5
-
-.encrypt2.finish:
-
-	! rotate
-	sll	in5, 29, in0
-	srl	in5, 3, in5
-	sll	out5, 29, in1
-	add	in5, in0, in5
-	srl	out5, 3, out5
-	LDPTR	[%sp+BIAS+ARG0+0*ARGSZ], in0
-	add	out5, in1, out5
-	st	out5, [in0]
-	st	in5, [in0+4]
-
-	ret
-	restore
-
-.DES_encrypt2.end:
-	.size	 DES_encrypt2, .DES_encrypt2.end-DES_encrypt2
-
-
-! void DES_encrypt3(data, ks1, ks2, ks3)
-! **************************************
-
-	.align 32
-	.global DES_encrypt3
-	.type	 DES_encrypt3,#function
-
-DES_encrypt3:
-
-	save	%sp, FRAME, %sp
-	
-	call	.PIC.me.up
-	mov	.PIC.me.up-(.-4),out0
-
-	ld	[in0], in5                ! left
-	add	in2, 120, in4             ! ks2
-
-	ld	[in0+4], out5             ! right
-	mov	in3, in2                  ! save ks3
-
-	! parameter 6  1/2 for include encryption/decryption
-	! parameter 7  1 for mov in1 to in3
-	! parameter 8  1 for mov in3 to in4
-	! parameter 9  1 for load ks3 and ks2 to in4 and in3
-
-	ip_macro(in5, out5, in5, out5, in3, 1, 1, 0, 0)
-
-	call	.des_dec
-	mov	in2, in3                  ! preload ks3
-
-	call	.des_enc
-	nop
-
-	fp_macro(in5, out5, 1)
-
-	ret
-	restore
-
-.DES_encrypt3.end:
-	.size	 DES_encrypt3,.DES_encrypt3.end-DES_encrypt3
-
-
-! void DES_decrypt3(data, ks1, ks2, ks3)
-! **************************************
-
-	.align 32
-	.global DES_decrypt3
-	.type	 DES_decrypt3,#function
-
-DES_decrypt3:
-
-	save	%sp, FRAME, %sp
-	
-	call	.PIC.me.up
-	mov	.PIC.me.up-(.-4),out0
-
-	ld	[in0], in5                ! left
-	add	in3, 120, in4             ! ks3
-
-	ld	[in0+4], out5             ! right
-	mov	in2, in3                  ! ks2
-
-	! parameter 6  1/2 for include encryption/decryption
-	! parameter 7  1 for mov in1 to in3
-	! parameter 8  1 for mov in3 to in4
-	! parameter 9  1 for load ks3 and ks2 to in4 and in3
-
-	ip_macro(in5, out5, out5, in5, in4, 2, 0, 0, 0)
-
-	call	.des_enc
-	add	in1, 120, in4             ! preload ks1
-
-	call	.des_dec
-	nop
-
-	fp_macro(out5, in5, 1)
-
-	ret
-	restore
-
-.DES_decrypt3.end:
-	.size	 DES_decrypt3,.DES_decrypt3.end-DES_decrypt3
-
-	.align	256
-	.type	 .des_and,#object
-	.size	 .des_and,284
-
-.des_and:
-
-! This table is used for AND 0xFC when it is known that register
-! bits 8-31 are zero. Makes it possible to do three arithmetic
-! operations in one cycle.
-
-	.byte  0, 0, 0, 0, 4, 4, 4, 4
-	.byte  8, 8, 8, 8, 12, 12, 12, 12
-	.byte  16, 16, 16, 16, 20, 20, 20, 20
-	.byte  24, 24, 24, 24, 28, 28, 28, 28
-	.byte  32, 32, 32, 32, 36, 36, 36, 36
-	.byte  40, 40, 40, 40, 44, 44, 44, 44
-	.byte  48, 48, 48, 48, 52, 52, 52, 52
-	.byte  56, 56, 56, 56, 60, 60, 60, 60
-	.byte  64, 64, 64, 64, 68, 68, 68, 68
-	.byte  72, 72, 72, 72, 76, 76, 76, 76
-	.byte  80, 80, 80, 80, 84, 84, 84, 84
-	.byte  88, 88, 88, 88, 92, 92, 92, 92
-	.byte  96, 96, 96, 96, 100, 100, 100, 100
-	.byte  104, 104, 104, 104, 108, 108, 108, 108
-	.byte  112, 112, 112, 112, 116, 116, 116, 116
-	.byte  120, 120, 120, 120, 124, 124, 124, 124
-	.byte  128, 128, 128, 128, 132, 132, 132, 132
-	.byte  136, 136, 136, 136, 140, 140, 140, 140
-	.byte  144, 144, 144, 144, 148, 148, 148, 148
-	.byte  152, 152, 152, 152, 156, 156, 156, 156
-	.byte  160, 160, 160, 160, 164, 164, 164, 164
-	.byte  168, 168, 168, 168, 172, 172, 172, 172
-	.byte  176, 176, 176, 176, 180, 180, 180, 180
-	.byte  184, 184, 184, 184, 188, 188, 188, 188
-	.byte  192, 192, 192, 192, 196, 196, 196, 196
-	.byte  200, 200, 200, 200, 204, 204, 204, 204
-	.byte  208, 208, 208, 208, 212, 212, 212, 212
-	.byte  216, 216, 216, 216, 220, 220, 220, 220
-	.byte  224, 224, 224, 224, 228, 228, 228, 228
-	.byte  232, 232, 232, 232, 236, 236, 236, 236
-	.byte  240, 240, 240, 240, 244, 244, 244, 244
-	.byte  248, 248, 248, 248, 252, 252, 252, 252
-
-	! 5 numbers for initil/final permutation
-
-	.word   0x0f0f0f0f                ! offset 256
-	.word	0x0000ffff                ! 260
-	.word	0x33333333                ! 264
-	.word	0x00ff00ff                ! 268
-	.word	0x55555555                ! 272
-
-	.word	0                         ! 276
-	.word	LOOPS                     ! 280
-	.word	0x0000FC00                ! 284
-.PIC.DES_SPtrans:
-	.word	%r_disp32(DES_SPtrans)
-
-! input:	out0	offset between .PIC.me.up and caller
-! output:	out0	pointer to .PIC.me.up
-!		out2	pointer to .des_and
-!		global1	pointer to DES_SPtrans
-	.align	32
-.PIC.me.up:
-	add	out0,%o7,out0			! pointer to .PIC.me.up
-#if 1
-	ld	[out0+(.PIC.DES_SPtrans-.PIC.me.up)],global1
-	add	global1,(.PIC.DES_SPtrans-.PIC.me.up),global1
-	add	global1,out0,global1
-#else
-# ifdef OPENSSL_PIC
-	! In case anybody wonders why this code is same for both ABI.
-	! To start with it is not. Do note LDPTR below. But of course
-	! you must be wondering why the rest of it does not contain
-	! things like %hh, %hm and %lm. Well, those are needed only
-	! if OpenSSL library *itself* will become larger than 4GB,
-	! which is not going to happen any time soon. 
-	sethi	%hi(DES_SPtrans),global1
-	or	global1,%lo(DES_SPtrans),global1
-	sethi	%hi(_GLOBAL_OFFSET_TABLE_-(.PIC.me.up-.)),out2
-	add	global1,out0,global1
-	add	out2,%lo(_GLOBAL_OFFSET_TABLE_-(.PIC.me.up-.)),out2
-	LDPTR	[out2+global1],global1
-# elif 0
-	setn	DES_SPtrans,out2,global1	! synthetic instruction !
-# elif defined(ABI64)
-	sethi	%hh(DES_SPtrans),out2
-	or	out2,%hm(DES_SPtrans),out2
-	sethi	%lm(DES_SPtrans),global1
-	or	global1,%lo(DES_SPtrans),global1
-	sllx	out2,32,out2
-	or	out2,global1,global1
-# else
-	sethi	%hi(DES_SPtrans),global1
-	or	global1,%lo(DES_SPtrans),global1
-# endif
-#endif
-	retl
-	add	out0,.des_and-.PIC.me.up,out2
-
-! void DES_ncbc_encrypt(input, output, length, schedule, ivec, enc)
-! *****************************************************************
-
-
-	.align 32
-	.global DES_ncbc_encrypt
-	.type	 DES_ncbc_encrypt,#function
-
-DES_ncbc_encrypt:
-
-	save	%sp, FRAME, %sp
-	
-	define({INPUT},  { [%sp+BIAS+ARG0+0*ARGSZ] })
-	define({OUTPUT}, { [%sp+BIAS+ARG0+1*ARGSZ] })
-	define({IVEC},   { [%sp+BIAS+ARG0+4*ARGSZ] })
-
-	call	.PIC.me.up
-	mov	.PIC.me.up-(.-4),out0
-
-	cmp	in5, 0                    ! enc   
-
-#ifdef OPENSSL_SYSNAME_ULTRASPARC
-	be,pn	%icc, .ncbc.dec
-#else
-	be	.ncbc.dec
-#endif
-	STPTR	in4, IVEC
-
-	! addr  left  right  temp  label
-	load_little_endian(in4, in5, out5, local3, .LLE1)  ! iv
-
-	addcc	in2, -8, in2              ! bytes missing when first block done
-
-#ifdef OPENSSL_SYSNAME_ULTRASPARC
-	bl,pn	%icc, .ncbc.enc.seven.or.less
-#else
-	bl	.ncbc.enc.seven.or.less
-#endif
-	mov	in3, in4                  ! schedule
-
-.ncbc.enc.next.block:
-
-	load_little_endian(in0, out4, global4, local3, .LLE2)  ! block
-
-.ncbc.enc.next.block_1:
-
-	xor	in5, out4, in5            ! iv xor
-	xor	out5, global4, out5       ! iv xor
-
-	! parameter 8  1 for move in3 to in4, 2 for move in4 to in3
-	ip_macro(in5, out5, in5, out5, in3, 0, 0, 2)
-
-.ncbc.enc.next.block_2:
-
-!//	call .des_enc                     ! compares in2 to 8
-!	rounds inlined for alignment purposes
-
-	add	global1, 768, global4     ! address sbox 4 since register used below
-
-	rounds_macro(in5, out5, 1, .ncbc.enc.1, in3, in4) ! include encryption  ks in3
-
-#ifdef OPENSSL_SYSNAME_ULTRASPARC
-	bl,pn	%icc, .ncbc.enc.next.block_fp
-#else
-	bl	.ncbc.enc.next.block_fp
-#endif
-	add	in0, 8, in0               ! input address
-
-	! If 8 or more bytes are to be encrypted after this block,
-	! we combine final permutation for this block with initial
-	! permutation for next block. Load next block:
-
-	load_little_endian(in0, global3, global4, local5, .LLE12)
-
-	!  parameter 1   original left
-	!  parameter 2   original right
-	!  parameter 3   left ip
-	!  parameter 4   right ip
-	!  parameter 5   1: load ks1/ks2 to in3/in4, add 120 to in4
-	!                2: mov in4 to in3
-	!
-	! also adds -8 to length in2 and loads loop counter to out4
-
-	fp_ip_macro(out0, out1, global3, global4, 2)
-
-	store_little_endian(in1, out0, out1, local3, .SLE10)  ! block
-
-	ld	[in3], out0               ! key 7531 first round next block
-	mov 	in5, local1
-	xor	global3, out5, in5        ! iv xor next block
-
-	ld	[in3+4], out1             ! key 8642
-	add	global1, 512, global3     ! address sbox 3 since register used
-	xor	global4, local1, out5     ! iv xor next block
-
-	ba	.ncbc.enc.next.block_2
-	add	in1, 8, in1               ! output adress
-
-.ncbc.enc.next.block_fp:
-
-	fp_macro(in5, out5)
-
-	store_little_endian(in1, in5, out5, local3, .SLE1)  ! block
-
-	addcc   in2, -8, in2              ! bytes missing when next block done
-
-#ifdef OPENSSL_SYSNAME_ULTRASPARC
-	bpos,pt	%icc, .ncbc.enc.next.block  ! also jumps if 0
-#else
-	bpos	.ncbc.enc.next.block
-#endif
-	add	in1, 8, in1
-
-.ncbc.enc.seven.or.less:
-
-	cmp	in2, -8
-
-#ifdef OPENSSL_SYSNAME_ULTRASPARC
-	ble,pt	%icc, .ncbc.enc.finish
-#else
-	ble	.ncbc.enc.finish
-#endif
-	nop
-
-	add	in2, 8, local1            ! bytes to load
-
-	! addr, length, dest left, dest right, temp, temp2, label, ret label
-	load_n_bytes(in0, local1, global4, out4, local2, local3, .LNB1, .ncbc.enc.next.block_1)
-
-	! Loads 1 to 7 bytes little endian to global4, out4
-
-
-.ncbc.enc.finish:
-
-	LDPTR	IVEC, local4
-	store_little_endian(local4, in5, out5, local5, .SLE2)  ! ivec
-
-	ret
-	restore
-
-
-.ncbc.dec:
-
-	STPTR	in0, INPUT
-	cmp	in2, 0                    ! length
-	add	in3, 120, in3
-
-	LDPTR	IVEC, local7              ! ivec
-#ifdef OPENSSL_SYSNAME_ULTRASPARC
-	ble,pn	%icc, .ncbc.dec.finish
-#else
-	ble	.ncbc.dec.finish
-#endif
-	mov	in3, in4                  ! schedule
-
-	STPTR	in1, OUTPUT
-	mov	in0, local5               ! input
-
-	load_little_endian(local7, in0, in1, local3, .LLE3)   ! ivec
-
-.ncbc.dec.next.block:
-
-	load_little_endian(local5, in5, out5, local3, .LLE4)  ! block
-
-	! parameter 6  1/2 for include encryption/decryption
-	! parameter 7  1 for mov in1 to in3
-	! parameter 8  1 for mov in3 to in4
-
-	ip_macro(in5, out5, out5, in5, in4, 2, 0, 1) ! include decryprion  ks in4
-
-	fp_macro(out5, in5, 0, 1) ! 1 for input and output address to local5/7
-
-	! in2 is bytes left to be stored
-	! in2 is compared to 8 in the rounds
-
-	xor	out5, in0, out4           ! iv xor
-#ifdef OPENSSL_SYSNAME_ULTRASPARC
-	bl,pn	%icc, .ncbc.dec.seven.or.less
-#else
-	bl	.ncbc.dec.seven.or.less
-#endif
-	xor	in5, in1, global4         ! iv xor
-
-	! Load ivec next block now, since input and output address might be the same.
-
-	load_little_endian_inc(local5, in0, in1, local3, .LLE5)  ! iv
-
-	store_little_endian(local7, out4, global4, local3, .SLE3)
-
-	STPTR	local5, INPUT
-	add	local7, 8, local7
-	addcc   in2, -8, in2
-
-#ifdef OPENSSL_SYSNAME_ULTRASPARC
-	bg,pt	%icc, .ncbc.dec.next.block
-#else
-	bg	.ncbc.dec.next.block
-#endif
-	STPTR	local7, OUTPUT
-
-
-.ncbc.dec.store.iv:
-
-	LDPTR	IVEC, local4              ! ivec
-	store_little_endian(local4, in0, in1, local5, .SLE4)
-
-.ncbc.dec.finish:
-
-	ret
-	restore
-
-.ncbc.dec.seven.or.less:
-
-	load_little_endian_inc(local5, in0, in1, local3, .LLE13)     ! ivec
-
-	store_n_bytes(local7, in2, global4, out4, local3, local4, .SNB1, .ncbc.dec.store.iv)
-
-
-.DES_ncbc_encrypt.end:
-	.size	 DES_ncbc_encrypt, .DES_ncbc_encrypt.end-DES_ncbc_encrypt
-
-
-! void DES_ede3_cbc_encrypt(input, output, lenght, ks1, ks2, ks3, ivec, enc)
-! **************************************************************************
-
-
-	.align 32
-	.global DES_ede3_cbc_encrypt
-	.type	 DES_ede3_cbc_encrypt,#function
-
-DES_ede3_cbc_encrypt:
-
-	save	%sp, FRAME, %sp
-
-	define({KS1}, { [%sp+BIAS+ARG0+3*ARGSZ] })
-	define({KS2}, { [%sp+BIAS+ARG0+4*ARGSZ] })
-	define({KS3}, { [%sp+BIAS+ARG0+5*ARGSZ] })
-
-	call	.PIC.me.up
-	mov	.PIC.me.up-(.-4),out0
-
-	LDPTR	[%fp+BIAS+ARG0+7*ARGSZ], local3          ! enc
-	LDPTR	[%fp+BIAS+ARG0+6*ARGSZ], local4          ! ivec
-	cmp	local3, 0                 ! enc
-
-#ifdef OPENSSL_SYSNAME_ULTRASPARC
-	be,pn	%icc, .ede3.dec
-#else
-	be	.ede3.dec
-#endif
-	STPTR	in4, KS2
-
-	STPTR	in5, KS3
-
-	load_little_endian(local4, in5, out5, local3, .LLE6)  ! ivec
-
-	addcc	in2, -8, in2              ! bytes missing after next block
-
-#ifdef OPENSSL_SYSNAME_ULTRASPARC
-	bl,pn	%icc,  .ede3.enc.seven.or.less
-#else
-	bl	.ede3.enc.seven.or.less
-#endif
-	STPTR	in3, KS1
-
-.ede3.enc.next.block:
-
-	load_little_endian(in0, out4, global4, local3, .LLE7)
-
-.ede3.enc.next.block_1:
-
-	LDPTR	KS2, in4
-	xor	in5, out4, in5            ! iv xor
-	xor	out5, global4, out5       ! iv xor
-
-	LDPTR	KS1, in3
-	add	in4, 120, in4             ! for decryption we use last subkey first
-	nop
-
-	ip_macro(in5, out5, in5, out5, in3)
-
-.ede3.enc.next.block_2:
-
-	call .des_enc                     ! ks1 in3
-	nop
-
-	call .des_dec                     ! ks2 in4
-	LDPTR	KS3, in3
-
-	call .des_enc                     ! ks3 in3  compares in2 to 8
-	nop
-
-#ifdef OPENSSL_SYSNAME_ULTRASPARC
-	bl,pn	%icc, .ede3.enc.next.block_fp
-#else
-	bl	.ede3.enc.next.block_fp
-#endif
-	add	in0, 8, in0
-
-	! If 8 or more bytes are to be encrypted after this block,
-	! we combine final permutation for this block with initial
-	! permutation for next block. Load next block:
-
-	load_little_endian(in0, global3, global4, local5, .LLE11)
-
-	!  parameter 1   original left
-	!  parameter 2   original right
-	!  parameter 3   left ip
-	!  parameter 4   right ip
-	!  parameter 5   1: load ks1/ks2 to in3/in4, add 120 to in4
-	!                2: mov in4 to in3
-	!
-	! also adds -8 to length in2 and loads loop counter to out4
-
-	fp_ip_macro(out0, out1, global3, global4, 1)
-
-	store_little_endian(in1, out0, out1, local3, .SLE9)  ! block
-
-	mov 	in5, local1
-	xor	global3, out5, in5        ! iv xor next block
-
-	ld	[in3], out0               ! key 7531
-	add	global1, 512, global3     ! address sbox 3
-	xor	global4, local1, out5     ! iv xor next block
-
-	ld	[in3+4], out1             ! key 8642
-	add	global1, 768, global4     ! address sbox 4
-	ba	.ede3.enc.next.block_2
-	add	in1, 8, in1
-
-.ede3.enc.next.block_fp:
-
-	fp_macro(in5, out5)
-
-	store_little_endian(in1, in5, out5, local3, .SLE5)  ! block
-
-	addcc   in2, -8, in2              ! bytes missing when next block done
-
-#ifdef OPENSSL_SYSNAME_ULTRASPARC
-	bpos,pt	%icc, .ede3.enc.next.block
-#else
-	bpos	.ede3.enc.next.block
-#endif
-	add	in1, 8, in1
-
-.ede3.enc.seven.or.less:
-
-	cmp	in2, -8
-
-#ifdef OPENSSL_SYSNAME_ULTRASPARC
-	ble,pt	%icc, .ede3.enc.finish
-#else
-	ble	.ede3.enc.finish
-#endif
-	nop
-
-	add	in2, 8, local1            ! bytes to load
-
-	! addr, length, dest left, dest right, temp, temp2, label, ret label
-	load_n_bytes(in0, local1, global4, out4, local2, local3, .LNB2, .ede3.enc.next.block_1)
-
-.ede3.enc.finish:
-
-	LDPTR	[%fp+BIAS+ARG0+6*ARGSZ], local4          ! ivec
-	store_little_endian(local4, in5, out5, local5, .SLE6)  ! ivec
-
-	ret
-	restore
-
-.ede3.dec:
-
-	STPTR	in0, INPUT
-	add	in5, 120, in5
-
-	STPTR	in1, OUTPUT
-	mov	in0, local5
-	add	in3, 120, in3
-
-	STPTR	in3, KS1
-	cmp	in2, 0
-
-#ifdef OPENSSL_SYSNAME_ULTRASPARC
-	ble	%icc, .ede3.dec.finish
-#else
-	ble	.ede3.dec.finish
-#endif
-	STPTR	in5, KS3
-
-	LDPTR	[%fp+BIAS+ARG0+6*ARGSZ], local7          ! iv
-	load_little_endian(local7, in0, in1, local3, .LLE8)
-
-.ede3.dec.next.block:
-
-	load_little_endian(local5, in5, out5, local3, .LLE9)
-
-	! parameter 6  1/2 for include encryption/decryption
-	! parameter 7  1 for mov in1 to in3
-	! parameter 8  1 for mov in3 to in4
-	! parameter 9  1 for load ks3 and ks2 to in4 and in3
-
-	ip_macro(in5, out5, out5, in5, in4, 2, 0, 0, 1) ! inc .des_dec ks3 in4
-
-	call .des_enc                     ! ks2 in3
-	LDPTR	KS1, in4
-
-	call .des_dec                     ! ks1 in4
-	nop
-
-	fp_macro(out5, in5, 0, 1)   ! 1 for input and output address local5/7
-
-	! in2 is bytes left to be stored
-	! in2 is compared to 8 in the rounds
-
-	xor	out5, in0, out4
-#ifdef OPENSSL_SYSNAME_ULTRASPARC
-	bl,pn	%icc, .ede3.dec.seven.or.less
-#else
-	bl	.ede3.dec.seven.or.less
-#endif
-	xor	in5, in1, global4
-
-	load_little_endian_inc(local5, in0, in1, local3, .LLE10)   ! iv next block
-
-	store_little_endian(local7, out4, global4, local3, .SLE7)  ! block
-
-	STPTR	local5, INPUT
-	addcc   in2, -8, in2
-	add	local7, 8, local7
-
-#ifdef OPENSSL_SYSNAME_ULTRASPARC
-	bg,pt	%icc, .ede3.dec.next.block
-#else
-	bg	.ede3.dec.next.block
-#endif
-	STPTR	local7, OUTPUT
-
-.ede3.dec.store.iv:
-
-	LDPTR	[%fp+BIAS+ARG0+6*ARGSZ], local4          ! ivec
-	store_little_endian(local4, in0, in1, local5, .SLE8)  ! ivec
-
-.ede3.dec.finish:
-
-	ret
-	restore
-
-.ede3.dec.seven.or.less:
-
-	load_little_endian_inc(local5, in0, in1, local3, .LLE14)     ! iv
-
-	store_n_bytes(local7, in2, global4, out4, local3, local4, .SNB2, .ede3.dec.store.iv)
-
-
-.DES_ede3_cbc_encrypt.end:
-	.size	 DES_ede3_cbc_encrypt,.DES_ede3_cbc_encrypt.end-DES_ede3_cbc_encrypt
diff --git a/crypto/openssl/crypto/des/asm/desboth.pl b/crypto/openssl/crypto/des/asm/desboth.pl
deleted file mode 100644
index eec00886e4c6..000000000000
--- a/crypto/openssl/crypto/des/asm/desboth.pl
+++ /dev/null
@@ -1,79 +0,0 @@
-#!/usr/local/bin/perl
-
-$L="edi";
-$R="esi";
-
-sub DES_encrypt3
-	{
-	local($name,$enc)=@_;
-
-	&function_begin_B($name,"");
-	&push("ebx");
-	&mov("ebx",&wparam(0));
-
-	&push("ebp");
-	&push("esi");
-
-	&push("edi");
-
-	&comment("");
-	&comment("Load the data words");
-	&mov($L,&DWP(0,"ebx","",0));
-	&mov($R,&DWP(4,"ebx","",0));
-	&stack_push(3);
-
-	&comment("");
-	&comment("IP");
-	&IP_new($L,$R,"edx",0);
-
-	# put them back
-	
-	if ($enc)
-		{
-		&mov(&DWP(4,"ebx","",0),$R);
-		 &mov("eax",&wparam(1));
-		&mov(&DWP(0,"ebx","",0),"edx");
-		 &mov("edi",&wparam(2));
-		 &mov("esi",&wparam(3));
-		}
-	else
-		{
-		&mov(&DWP(4,"ebx","",0),$R);
-		 &mov("esi",&wparam(1));
-		&mov(&DWP(0,"ebx","",0),"edx");
-		 &mov("edi",&wparam(2));
-		 &mov("eax",&wparam(3));
-		}
-	&mov(&swtmp(2),	(DWC(($enc)?"1":"0")));
-	&mov(&swtmp(1),	"eax");
-	&mov(&swtmp(0),	"ebx");
-	&call("DES_encrypt2");
-	&mov(&swtmp(2),	(DWC(($enc)?"0":"1")));
-	&mov(&swtmp(1),	"edi");
-	&mov(&swtmp(0),	"ebx");
-	&call("DES_encrypt2");
-	&mov(&swtmp(2),	(DWC(($enc)?"1":"0")));
-	&mov(&swtmp(1),	"esi");
-	&mov(&swtmp(0),	"ebx");
-	&call("DES_encrypt2");
-
-	&stack_pop(3);
-	&mov($L,&DWP(0,"ebx","",0));
-	&mov($R,&DWP(4,"ebx","",0));
-
-	&comment("");
-	&comment("FP");
-	&FP_new($L,$R,"eax",0);
-
-	&mov(&DWP(0,"ebx","",0),"eax");
-	&mov(&DWP(4,"ebx","",0),$R);
-
-	&pop("edi");
-	&pop("esi");
-	&pop("ebp");
-	&pop("ebx");
-	&ret();
-	&function_end_B($name);
-	}
-
-
diff --git a/crypto/openssl/crypto/des/asm/readme b/crypto/openssl/crypto/des/asm/readme
deleted file mode 100644
index 1beafe253b17..000000000000
--- a/crypto/openssl/crypto/des/asm/readme
+++ /dev/null
@@ -1,131 +0,0 @@
-First up, let me say I don't like writing in assembler.  It is not portable,
-dependant on the particular CPU architecture release and is generally a pig
-to debug and get right.  Having said that, the x86 architecture is probably
-the most important for speed due to number of boxes and since
-it appears to be the worst architecture to to get
-good C compilers for.  So due to this, I have lowered myself to do
-assembler for the inner DES routines in libdes :-).
-
-The file to implement in assembler is des_enc.c.  Replace the following
-4 functions
-des_encrypt1(DES_LONG data[2],des_key_schedule ks, int encrypt);
-des_encrypt2(DES_LONG data[2],des_key_schedule ks, int encrypt);
-des_encrypt3(DES_LONG data[2],des_key_schedule ks1,ks2,ks3);
-des_decrypt3(DES_LONG data[2],des_key_schedule ks1,ks2,ks3);
-
-They encrypt/decrypt the 64 bits held in 'data' using
-the 'ks' key schedules.   The only difference between the 4 functions is that
-des_encrypt2() does not perform IP() or FP() on the data (this is an
-optimization for when doing triple DES and des_encrypt3() and des_decrypt3()
-perform triple des.  The triple DES routines are in here because it does
-make a big difference to have them located near the des_encrypt2 function
-at link time..
-
-Now as we all know, there are lots of different operating systems running on
-x86 boxes, and unfortunately they normally try to make sure their assembler
-formating is not the same as the other peoples.
-The 4 main formats I know of are
-Microsoft	Windows 95/Windows NT
-Elf		Includes Linux and FreeBSD(?).
-a.out		The older Linux.
-Solaris		Same as Elf but different comments :-(.
-
-Now I was not overly keen to write 4 different copies of the same code,
-so I wrote a few perl routines to output the correct assembler, given
-a target assembler type.  This code is ugly and is just a hack.
-The libraries are x86unix.pl and x86ms.pl.
-des586.pl, des686.pl and des-som[23].pl are the programs to actually
-generate the assembler.
-
-So to generate elf assembler
-perl des-som3.pl elf >dx86-elf.s
-For Windows 95/NT
-perl des-som2.pl win32 >win32.asm
-
-[ update 4 Jan 1996 ]
-I have added another way to do things.
-perl des-som3.pl cpp >dx86-cpp.s
-generates a file that will be included by dx86unix.cpp when it is compiled.
-To build for elf, a.out, solaris, bsdi etc,
-cc -E -DELF asm/dx86unix.cpp | as -o asm/dx86-elf.o
-cc -E -DSOL asm/dx86unix.cpp | as -o asm/dx86-sol.o
-cc -E -DOUT asm/dx86unix.cpp | as -o asm/dx86-out.o
-cc -E -DBSDI asm/dx86unix.cpp | as -o asm/dx86bsdi.o
-This was done to cut down the number of files in the distribution.
-
-Now the ugly part.  I acquired my copy of Intels
-"Optimization's For Intel's 32-Bit Processors" and found a few interesting
-things.  First, the aim of the exersize is to 'extract' one byte at a time
-from a word and do an array lookup.  This involves getting the byte from
-the 4 locations in the word and moving it to a new word and doing the lookup.
-The most obvious way to do this is
-xor	eax,	eax				# clear word
-movb	al,	cl				# get low byte
-xor	edi	DWORD PTR 0x100+des_SP[eax] 	# xor in word
-movb	al,	ch				# get next byte
-xor	edi	DWORD PTR 0x300+des_SP[eax] 	# xor in word
-shr	ecx	16
-which seems ok.  For the pentium, this system appears to be the best.
-One has to do instruction interleaving to keep both functional units
-operating, but it is basically very efficient.
-
-Now the crunch.  When a full register is used after a partial write, eg.
-mov	al,	cl
-xor	edi,	DWORD PTR 0x100+des_SP[eax]
-386	- 1 cycle stall
-486	- 1 cycle stall
-586	- 0 cycle stall
-686	- at least 7 cycle stall (page 22 of the above mentioned document).
-
-So the technique that produces the best results on a pentium, according to
-the documentation, will produce hideous results on a pentium pro.
-
-To get around this, des686.pl will generate code that is not as fast on
-a pentium, should be very good on a pentium pro.
-mov	eax,	ecx				# copy word 
-shr	ecx,	8				# line up next byte
-and	eax,	0fch				# mask byte
-xor	edi	DWORD PTR 0x100+des_SP[eax] 	# xor in array lookup
-mov	eax,	ecx				# get word
-shr	ecx	8				# line up next byte
-and	eax,	0fch				# mask byte
-xor	edi	DWORD PTR 0x300+des_SP[eax] 	# xor in array lookup
-
-Due to the execution units in the pentium, this actually works quite well.
-For a pentium pro it should be very good.  This is the type of output
-Visual C++ generates.
-
-There is a third option.  instead of using
-mov	al,	ch
-which is bad on the pentium pro, one may be able to use
-movzx	eax,	ch
-which may not incur the partial write penalty.  On the pentium,
-this instruction takes 4 cycles so is not worth using but on the
-pentium pro it appears it may be worth while.  I need access to one to
-experiment :-).
-
-eric (20 Oct 1996)
-
-22 Nov 1996 - I have asked people to run the 2 different version on pentium
-pros and it appears that the intel documentation is wrong.  The
-mov al,bh is still faster on a pentium pro, so just use the des586.pl
-install des686.pl
-
-3 Dec 1996 - I added des_encrypt3/des_decrypt3 because I have moved these
-functions into des_enc.c because it does make a massive performance
-difference on some boxes to have the functions code located close to
-the des_encrypt2() function.
-
-9 Jan 1997 - des-som2.pl is now the correct perl script to use for
-pentiums.  It contains an inner loop from
-Svend Olaf Mikkelsen <svolaf@inet.uni-c.dk> which does raw ecb DES calls at
-273,000 per second.  He had a previous version at 250,000 and the best
-I was able to get was 203,000.  The content has not changed, this is all
-due to instruction sequencing (and actual instructions choice) which is able
-to keep both functional units of the pentium going.
-We may have lost the ugly register usage restrictions when x86 went 32 bit
-but for the pentium it has been replaced by evil instruction ordering tricks.
-
-13 Jan 1997 - des-som3.pl, more optimizations from Svend Olaf.
-raw DES at 281,000 per second on a pentium 100.
-
diff --git a/crypto/openssl/crypto/des/cbc3_enc.c b/crypto/openssl/crypto/des/cbc3_enc.c
deleted file mode 100644
index b5db4e14f73e..000000000000
--- a/crypto/openssl/crypto/des/cbc3_enc.c
+++ /dev/null
@@ -1,99 +0,0 @@
-/* crypto/des/cbc3_enc.c */
-/* Copyright (C) 1995-1998 Eric Young (eay@cryptsoft.com)
- * All rights reserved.
- *
- * This package is an SSL implementation written
- * by Eric Young (eay@cryptsoft.com).
- * The implementation was written so as to conform with Netscapes SSL.
- * 
- * This library is free for commercial and non-commercial use as long as
- * the following conditions are aheared to.  The following conditions
- * apply to all code found in this distribution, be it the RC4, RSA,
- * lhash, DES, etc., code; not just the SSL code.  The SSL documentation
- * included with this distribution is covered by the same copyright terms
- * except that the holder is Tim Hudson (tjh@cryptsoft.com).
- * 
- * Copyright remains Eric Young's, and as such any Copyright notices in
- * the code are not to be removed.
- * If this package is used in a product, Eric Young should be given attribution
- * as the author of the parts of the library used.
- * This can be in the form of a textual message at program startup or
- * in documentation (online or textual) provided with the package.
- * 
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions
- * are met:
- * 1. Redistributions of source code must retain the copyright
- *    notice, this list of conditions and the following disclaimer.
- * 2. Redistributions in binary form must reproduce the above copyright
- *    notice, this list of conditions and the following disclaimer in the
- *    documentation and/or other materials provided with the distribution.
- * 3. All advertising materials mentioning features or use of this software
- *    must display the following acknowledgement:
- *    "This product includes cryptographic software written by
- *     Eric Young (eay@cryptsoft.com)"
- *    The word 'cryptographic' can be left out if the rouines from the library
- *    being used are not cryptographic related :-).
- * 4. If you include any Windows specific code (or a derivative thereof) from 
- *    the apps directory (application code) you must include an acknowledgement:
- *    "This product includes software written by Tim Hudson (tjh@cryptsoft.com)"
- * 
- * THIS SOFTWARE IS PROVIDED BY ERIC YOUNG ``AS IS'' AND
- * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
- * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
- * ARE DISCLAIMED.  IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE
- * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
- * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
- * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
- * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
- * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
- * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
- * SUCH DAMAGE.
- * 
- * The licence and distribution terms for any publically available version or
- * derivative of this code cannot be changed.  i.e. this code cannot simply be
- * copied and put under another distribution licence
- * [including the GNU Public Licence.]
- */
-
-#include "des_locl.h"
-
-/* HAS BUGS! DON'T USE - this is only present for use in des.c */
-void DES_3cbc_encrypt(DES_cblock *input, DES_cblock *output, long length,
-	     DES_key_schedule ks1, DES_key_schedule ks2, DES_cblock *iv1,
-	     DES_cblock *iv2, int enc)
-	{
-	int off=((int)length-1)/8;
-	long l8=((length+7)/8)*8;
-	DES_cblock niv1,niv2;
-
-	if (enc == DES_ENCRYPT)
-		{
-		DES_cbc_encrypt((unsigned char*)input,
-				(unsigned char*)output,length,&ks1,iv1,enc);
-		if (length >= sizeof(DES_cblock))
-			memcpy(niv1,output[off],sizeof(DES_cblock));
-		DES_cbc_encrypt((unsigned char*)output,
-				(unsigned char*)output,l8,&ks2,iv1,!enc);
-		DES_cbc_encrypt((unsigned char*)output,
-				(unsigned char*)output,l8,&ks1,iv2,enc);
-		if (length >= sizeof(DES_cblock))
-			memcpy(niv2,output[off],sizeof(DES_cblock));
-		}
-	else
-		{
-		if (length >= sizeof(DES_cblock))
-			memcpy(niv2,input[off],sizeof(DES_cblock));
-		DES_cbc_encrypt((unsigned char*)input,
-				(unsigned char*)output,l8,&ks1,iv2,enc);
-		DES_cbc_encrypt((unsigned char*)output,
-				(unsigned char*)output,l8,&ks2,iv1,!enc);
-		if (length >= sizeof(DES_cblock))
-			memcpy(niv1,output[off],sizeof(DES_cblock));
-		DES_cbc_encrypt((unsigned char*)output,
-				(unsigned char*)output,length,&ks1,iv1,enc);
-		}
-	memcpy(*iv1,niv1,sizeof(DES_cblock));
-	memcpy(*iv2,niv2,sizeof(DES_cblock));
-	}
-
diff --git a/crypto/openssl/crypto/des/cbc_cksm.c b/crypto/openssl/crypto/des/cbc_cksm.c
deleted file mode 100644
index 09a7ba56aada..000000000000
--- a/crypto/openssl/crypto/des/cbc_cksm.c
+++ /dev/null
@@ -1,106 +0,0 @@
-/* crypto/des/cbc_cksm.c */
-/* Copyright (C) 1995-1998 Eric Young (eay@cryptsoft.com)
- * All rights reserved.
- *
- * This package is an SSL implementation written
- * by Eric Young (eay@cryptsoft.com).
- * The implementation was written so as to conform with Netscapes SSL.
- * 
- * This library is free for commercial and non-commercial use as long as
- * the following conditions are aheared to.  The following conditions
- * apply to all code found in this distribution, be it the RC4, RSA,
- * lhash, DES, etc., code; not just the SSL code.  The SSL documentation
- * included with this distribution is covered by the same copyright terms
- * except that the holder is Tim Hudson (tjh@cryptsoft.com).
- * 
- * Copyright remains Eric Young's, and as such any Copyright notices in
- * the code are not to be removed.
- * If this package is used in a product, Eric Young should be given attribution
- * as the author of the parts of the library used.
- * This can be in the form of a textual message at program startup or
- * in documentation (online or textual) provided with the package.
- * 
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions
- * are met:
- * 1. Redistributions of source code must retain the copyright
- *    notice, this list of conditions and the following disclaimer.
- * 2. Redistributions in binary form must reproduce the above copyright
- *    notice, this list of conditions and the following disclaimer in the
- *    documentation and/or other materials provided with the distribution.
- * 3. All advertising materials mentioning features or use of this software
- *    must display the following acknowledgement:
- *    "This product includes cryptographic software written by
- *     Eric Young (eay@cryptsoft.com)"
- *    The word 'cryptographic' can be left out if the rouines from the library
- *    being used are not cryptographic related :-).
- * 4. If you include any Windows specific code (or a derivative thereof) from 
- *    the apps directory (application code) you must include an acknowledgement:
- *    "This product includes software written by Tim Hudson (tjh@cryptsoft.com)"
- * 
- * THIS SOFTWARE IS PROVIDED BY ERIC YOUNG ``AS IS'' AND
- * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
- * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
- * ARE DISCLAIMED.  IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE
- * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
- * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
- * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
- * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
- * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
- * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
- * SUCH DAMAGE.
- * 
- * The licence and distribution terms for any publically available version or
- * derivative of this code cannot be changed.  i.e. this code cannot simply be
- * copied and put under another distribution licence
- * [including the GNU Public Licence.]
- */
-
-#include "des_locl.h"
-
-DES_LONG DES_cbc_cksum(const unsigned char *in, DES_cblock *output,
-		       long length, DES_key_schedule *schedule,
-		       const_DES_cblock *ivec)
-	{
-	register DES_LONG tout0,tout1,tin0,tin1;
-	register long l=length;
-	DES_LONG tin[2];
-	unsigned char *out = &(*output)[0];
-	const unsigned char *iv = &(*ivec)[0];
-
-	c2l(iv,tout0);
-	c2l(iv,tout1);
-	for (; l>0; l-=8)
-		{
-		if (l >= 8)
-			{
-			c2l(in,tin0);
-			c2l(in,tin1);
-			}
-		else
-			c2ln(in,tin0,tin1,l);
-			
-		tin0^=tout0; tin[0]=tin0;
-		tin1^=tout1; tin[1]=tin1;
-		DES_encrypt1((DES_LONG *)tin,schedule,DES_ENCRYPT);
-		/* fix 15/10/91 eay - thanks to keithr@sco.COM */
-		tout0=tin[0];
-		tout1=tin[1];
-		}
-	if (out != NULL)
-		{
-		l2c(tout0,out);
-		l2c(tout1,out);
-		}
-	tout0=tin0=tin1=tin[0]=tin[1]=0;
-	/*
-	  Transform the data in tout1 so that it will
-	  match the return value that the MIT Kerberos
-	  mit_des_cbc_cksum API returns.
-	*/
-	tout1 = ((tout1 >> 24L) & 0x000000FF)
-	      | ((tout1 >> 8L)  & 0x0000FF00)
-	      | ((tout1 << 8L)  & 0x00FF0000)
-	      | ((tout1 << 24L) & 0xFF000000);
-	return(tout1);
-	}
diff --git a/crypto/openssl/crypto/des/cbc_enc.c b/crypto/openssl/crypto/des/cbc_enc.c
deleted file mode 100644
index 677903ae4e32..000000000000
--- a/crypto/openssl/crypto/des/cbc_enc.c
+++ /dev/null
@@ -1,61 +0,0 @@
-/* crypto/des/cbc_enc.c */
-/* Copyright (C) 1995-1998 Eric Young (eay@cryptsoft.com)
- * All rights reserved.
- *
- * This package is an SSL implementation written
- * by Eric Young (eay@cryptsoft.com).
- * The implementation was written so as to conform with Netscapes SSL.
- * 
- * This library is free for commercial and non-commercial use as long as
- * the following conditions are aheared to.  The following conditions
- * apply to all code found in this distribution, be it the RC4, RSA,
- * lhash, DES, etc., code; not just the SSL code.  The SSL documentation
- * included with this distribution is covered by the same copyright terms
- * except that the holder is Tim Hudson (tjh@cryptsoft.com).
- * 
- * Copyright remains Eric Young's, and as such any Copyright notices in
- * the code are not to be removed.
- * If this package is used in a product, Eric Young should be given attribution
- * as the author of the parts of the library used.
- * This can be in the form of a textual message at program startup or
- * in documentation (online or textual) provided with the package.
- * 
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions
- * are met:
- * 1. Redistributions of source code must retain the copyright
- *    notice, this list of conditions and the following disclaimer.
- * 2. Redistributions in binary form must reproduce the above copyright
- *    notice, this list of conditions and the following disclaimer in the
- *    documentation and/or other materials provided with the distribution.
- * 3. All advertising materials mentioning features or use of this software
- *    must display the following acknowledgement:
- *    "This product includes cryptographic software written by
- *     Eric Young (eay@cryptsoft.com)"
- *    The word 'cryptographic' can be left out if the rouines from the library
- *    being used are not cryptographic related :-).
- * 4. If you include any Windows specific code (or a derivative thereof) from 
- *    the apps directory (application code) you must include an acknowledgement:
- *    "This product includes software written by Tim Hudson (tjh@cryptsoft.com)"
- * 
- * THIS SOFTWARE IS PROVIDED BY ERIC YOUNG ``AS IS'' AND
- * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
- * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
- * ARE DISCLAIMED.  IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE
- * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
- * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
- * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
- * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
- * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
- * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
- * SUCH DAMAGE.
- * 
- * The licence and distribution terms for any publically available version or
- * derivative of this code cannot be changed.  i.e. this code cannot simply be
- * copied and put under another distribution licence
- * [including the GNU Public Licence.]
- */
-
-#define CBC_ENC_C__DONT_UPDATE_IV
-
-#include "ncbc_enc.c" /* des_cbc_encrypt */
diff --git a/crypto/openssl/crypto/des/cfb64ede.c b/crypto/openssl/crypto/des/cfb64ede.c
deleted file mode 100644
index de34ecceb96d..000000000000
--- a/crypto/openssl/crypto/des/cfb64ede.c
+++ /dev/null
@@ -1,254 +0,0 @@
-/* crypto/des/cfb64ede.c */
-/* Copyright (C) 1995-1998 Eric Young (eay@cryptsoft.com)
- * All rights reserved.
- *
- * This package is an SSL implementation written
- * by Eric Young (eay@cryptsoft.com).
- * The implementation was written so as to conform with Netscapes SSL.
- * 
- * This library is free for commercial and non-commercial use as long as
- * the following conditions are aheared to.  The following conditions
- * apply to all code found in this distribution, be it the RC4, RSA,
- * lhash, DES, etc., code; not just the SSL code.  The SSL documentation
- * included with this distribution is covered by the same copyright terms
- * except that the holder is Tim Hudson (tjh@cryptsoft.com).
- * 
- * Copyright remains Eric Young's, and as such any Copyright notices in
- * the code are not to be removed.
- * If this package is used in a product, Eric Young should be given attribution
- * as the author of the parts of the library used.
- * This can be in the form of a textual message at program startup or
- * in documentation (online or textual) provided with the package.
- * 
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions
- * are met:
- * 1. Redistributions of source code must retain the copyright
- *    notice, this list of conditions and the following disclaimer.
- * 2. Redistributions in binary form must reproduce the above copyright
- *    notice, this list of conditions and the following disclaimer in the
- *    documentation and/or other materials provided with the distribution.
- * 3. All advertising materials mentioning features or use of this software
- *    must display the following acknowledgement:
- *    "This product includes cryptographic software written by
- *     Eric Young (eay@cryptsoft.com)"
- *    The word 'cryptographic' can be left out if the rouines from the library
- *    being used are not cryptographic related :-).
- * 4. If you include any Windows specific code (or a derivative thereof) from 
- *    the apps directory (application code) you must include an acknowledgement:
- *    "This product includes software written by Tim Hudson (tjh@cryptsoft.com)"
- * 
- * THIS SOFTWARE IS PROVIDED BY ERIC YOUNG ``AS IS'' AND
- * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
- * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
- * ARE DISCLAIMED.  IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE
- * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
- * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
- * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
- * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
- * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
- * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
- * SUCH DAMAGE.
- * 
- * The licence and distribution terms for any publically available version or
- * derivative of this code cannot be changed.  i.e. this code cannot simply be
- * copied and put under another distribution licence
- * [including the GNU Public Licence.]
- */
-
-#include "des_locl.h"
-#include "e_os.h"
-
-/* The input and output encrypted as though 64bit cfb mode is being
- * used.  The extra state information to record how much of the
- * 64bit block we have used is contained in *num;
- */
-
-void DES_ede3_cfb64_encrypt(const unsigned char *in, unsigned char *out,
-			    long length, DES_key_schedule *ks1,
-			    DES_key_schedule *ks2, DES_key_schedule *ks3,
-			    DES_cblock *ivec, int *num, int enc)
-	{
-	register DES_LONG v0,v1;
-	register long l=length;
-	register int n= *num;
-	DES_LONG ti[2];
-	unsigned char *iv,c,cc;
-
-	iv=&(*ivec)[0];
-	if (enc)
-		{
-		while (l--)
-			{
-			if (n == 0)
-				{
-				c2l(iv,v0);
-				c2l(iv,v1);
-
-				ti[0]=v0;
-				ti[1]=v1;
-				DES_encrypt3(ti,ks1,ks2,ks3);
-				v0=ti[0];
-				v1=ti[1];
-
-				iv = &(*ivec)[0];
-				l2c(v0,iv);
-				l2c(v1,iv);
-				iv = &(*ivec)[0];
-				}
-			c= *(in++)^iv[n];
-			*(out++)=c;
-			iv[n]=c;
-			n=(n+1)&0x07;
-			}
-		}
-	else
-		{
-		while (l--)
-			{
-			if (n == 0)
-				{
-				c2l(iv,v0);
-				c2l(iv,v1);
-
-				ti[0]=v0;
-				ti[1]=v1;
-				DES_encrypt3(ti,ks1,ks2,ks3);
-				v0=ti[0];
-				v1=ti[1];
-
-				iv = &(*ivec)[0];
-				l2c(v0,iv);
-				l2c(v1,iv);
-				iv = &(*ivec)[0];
-				}
-			cc= *(in++);
-			c=iv[n];
-			iv[n]=cc;
-			*(out++)=c^cc;
-			n=(n+1)&0x07;
-			}
-		}
-	v0=v1=ti[0]=ti[1]=c=cc=0;
-	*num=n;
-	}
-
-#ifdef undef /* MACRO */
-void DES_ede2_cfb64_encrypt(unsigned char *in, unsigned char *out, long length,
-	     DES_key_schedule ks1, DES_key_schedule ks2, DES_cblock (*ivec),
-	     int *num, int enc)
-	{
-	DES_ede3_cfb64_encrypt(in,out,length,ks1,ks2,ks1,ivec,num,enc);
-	}
-#endif
-
-/* This is compatible with the single key CFB-r for DES, even thought that's
- * not what EVP needs.
- */
-
-void DES_ede3_cfb_encrypt(const unsigned char *in,unsigned char *out,
-			  int numbits,long length,DES_key_schedule *ks1,
-			  DES_key_schedule *ks2,DES_key_schedule *ks3,
-			  DES_cblock *ivec,int enc)
-	{
-	register DES_LONG d0,d1,v0,v1;
-	register unsigned long l=length,n=((unsigned int)numbits+7)/8;
-	register int num=numbits,i;
-	DES_LONG ti[2];
-	unsigned char *iv;
-	unsigned char ovec[16];
-
-	if (num > 64) return;
-	iv = &(*ivec)[0];
-	c2l(iv,v0);
-	c2l(iv,v1);
-	if (enc)
-		{
-		while (l >= n)
-			{
-			l-=n;
-			ti[0]=v0;
-			ti[1]=v1;
-			DES_encrypt3(ti,ks1,ks2,ks3);
-			c2ln(in,d0,d1,n);
-			in+=n;
-			d0^=ti[0];
-			d1^=ti[1];
-			l2cn(d0,d1,out,n);
-			out+=n;
-			/* 30-08-94 - eay - changed because l>>32 and
-			 * l<<32 are bad under gcc :-( */
-			if (num == 32)
-				{ v0=v1; v1=d0; }
-			else if (num == 64)
-				{ v0=d0; v1=d1; }
-			else
-				{
-				iv=&ovec[0];
-				l2c(v0,iv);
-				l2c(v1,iv);
-				l2c(d0,iv);
-				l2c(d1,iv);
-				/* shift ovec left most of the bits... */
-				memmove(ovec,ovec+num/8,8+(num%8 ? 1 : 0));
-				/* now the remaining bits */
-				if(num%8 != 0)
-					for(i=0 ; i < 8 ; ++i)
-						{
-						ovec[i]<<=num%8;
-						ovec[i]|=ovec[i+1]>>(8-num%8);
-						}
-				iv=&ovec[0];
-				c2l(iv,v0);
-				c2l(iv,v1);
-				}
-			}
-		}
-	else
-		{
-		while (l >= n)
-			{
-			l-=n;
-			ti[0]=v0;
-			ti[1]=v1;
-			DES_encrypt3(ti,ks1,ks2,ks3);
-			c2ln(in,d0,d1,n);
-			in+=n;
-			/* 30-08-94 - eay - changed because l>>32 and
-			 * l<<32 are bad under gcc :-( */
-			if (num == 32)
-				{ v0=v1; v1=d0; }
-			else if (num == 64)
-				{ v0=d0; v1=d1; }
-			else
-				{
-				iv=&ovec[0];
-				l2c(v0,iv);
-				l2c(v1,iv);
-				l2c(d0,iv);
-				l2c(d1,iv);
-				/* shift ovec left most of the bits... */
-				memmove(ovec,ovec+num/8,8+(num%8 ? 1 : 0));
-				/* now the remaining bits */
-				if(num%8 != 0)
-					for(i=0 ; i < 8 ; ++i)
-						{
-						ovec[i]<<=num%8;
-						ovec[i]|=ovec[i+1]>>(8-num%8);
-						}
-				iv=&ovec[0];
-				c2l(iv,v0);
-				c2l(iv,v1);
-				}
-			d0^=ti[0];
-			d1^=ti[1];
-			l2cn(d0,d1,out,n);
-			out+=n;
-			}
-		}
-	iv = &(*ivec)[0];
-	l2c(v0,iv);
-	l2c(v1,iv);
-	v0=v1=d0=d1=ti[0]=ti[1]=0;
-	}
-
diff --git a/crypto/openssl/crypto/des/cfb64enc.c b/crypto/openssl/crypto/des/cfb64enc.c
deleted file mode 100644
index 5ec8683e402b..000000000000
--- a/crypto/openssl/crypto/des/cfb64enc.c
+++ /dev/null
@@ -1,121 +0,0 @@
-/* crypto/des/cfb64enc.c */
-/* Copyright (C) 1995-1998 Eric Young (eay@cryptsoft.com)
- * All rights reserved.
- *
- * This package is an SSL implementation written
- * by Eric Young (eay@cryptsoft.com).
- * The implementation was written so as to conform with Netscapes SSL.
- * 
- * This library is free for commercial and non-commercial use as long as
- * the following conditions are aheared to.  The following conditions
- * apply to all code found in this distribution, be it the RC4, RSA,
- * lhash, DES, etc., code; not just the SSL code.  The SSL documentation
- * included with this distribution is covered by the same copyright terms
- * except that the holder is Tim Hudson (tjh@cryptsoft.com).
- * 
- * Copyright remains Eric Young's, and as such any Copyright notices in
- * the code are not to be removed.
- * If this package is used in a product, Eric Young should be given attribution
- * as the author of the parts of the library used.
- * This can be in the form of a textual message at program startup or
- * in documentation (online or textual) provided with the package.
- * 
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions
- * are met:
- * 1. Redistributions of source code must retain the copyright
- *    notice, this list of conditions and the following disclaimer.
- * 2. Redistributions in binary form must reproduce the above copyright
- *    notice, this list of conditions and the following disclaimer in the
- *    documentation and/or other materials provided with the distribution.
- * 3. All advertising materials mentioning features or use of this software
- *    must display the following acknowledgement:
- *    "This product includes cryptographic software written by
- *     Eric Young (eay@cryptsoft.com)"
- *    The word 'cryptographic' can be left out if the rouines from the library
- *    being used are not cryptographic related :-).
- * 4. If you include any Windows specific code (or a derivative thereof) from 
- *    the apps directory (application code) you must include an acknowledgement:
- *    "This product includes software written by Tim Hudson (tjh@cryptsoft.com)"
- * 
- * THIS SOFTWARE IS PROVIDED BY ERIC YOUNG ``AS IS'' AND
- * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
- * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
- * ARE DISCLAIMED.  IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE
- * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
- * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
- * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
- * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
- * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
- * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
- * SUCH DAMAGE.
- * 
- * The licence and distribution terms for any publically available version or
- * derivative of this code cannot be changed.  i.e. this code cannot simply be
- * copied and put under another distribution licence
- * [including the GNU Public Licence.]
- */
-
-#include "des_locl.h"
-
-/* The input and output encrypted as though 64bit cfb mode is being
- * used.  The extra state information to record how much of the
- * 64bit block we have used is contained in *num;
- */
-
-void DES_cfb64_encrypt(const unsigned char *in, unsigned char *out,
-		       long length, DES_key_schedule *schedule,
-		       DES_cblock *ivec, int *num, int enc)
-	{
-	register DES_LONG v0,v1;
-	register long l=length;
-	register int n= *num;
-	DES_LONG ti[2];
-	unsigned char *iv,c,cc;
-
-	iv = &(*ivec)[0];
-	if (enc)
-		{
-		while (l--)
-			{
-			if (n == 0)
-				{
-				c2l(iv,v0); ti[0]=v0;
-				c2l(iv,v1); ti[1]=v1;
-				DES_encrypt1(ti,schedule,DES_ENCRYPT);
-				iv = &(*ivec)[0];
-				v0=ti[0]; l2c(v0,iv);
-				v0=ti[1]; l2c(v0,iv);
-				iv = &(*ivec)[0];
-				}
-			c= *(in++)^iv[n];
-			*(out++)=c;
-			iv[n]=c;
-			n=(n+1)&0x07;
-			}
-		}
-	else
-		{
-		while (l--)
-			{
-			if (n == 0)
-				{
-				c2l(iv,v0); ti[0]=v0;
-				c2l(iv,v1); ti[1]=v1;
-				DES_encrypt1(ti,schedule,DES_ENCRYPT);
-				iv = &(*ivec)[0];
-				v0=ti[0]; l2c(v0,iv);
-				v0=ti[1]; l2c(v0,iv);
-				iv = &(*ivec)[0];
-				}
-			cc= *(in++);
-			c=iv[n];
-			iv[n]=cc;
-			*(out++)=c^cc;
-			n=(n+1)&0x07;
-			}
-		}
-	v0=v1=ti[0]=ti[1]=c=cc=0;
-	*num=n;
-	}
-
diff --git a/crypto/openssl/crypto/des/cfb_enc.c b/crypto/openssl/crypto/des/cfb_enc.c
deleted file mode 100644
index 720f29a28e62..000000000000
--- a/crypto/openssl/crypto/des/cfb_enc.c
+++ /dev/null
@@ -1,195 +0,0 @@
-/* crypto/des/cfb_enc.c */
-/* Copyright (C) 1995-1998 Eric Young (eay@cryptsoft.com)
- * All rights reserved.
- *
- * This package is an SSL implementation written
- * by Eric Young (eay@cryptsoft.com).
- * The implementation was written so as to conform with Netscapes SSL.
- * 
- * This library is free for commercial and non-commercial use as long as
- * the following conditions are aheared to.  The following conditions
- * apply to all code found in this distribution, be it the RC4, RSA,
- * lhash, DES, etc., code; not just the SSL code.  The SSL documentation
- * included with this distribution is covered by the same copyright terms
- * except that the holder is Tim Hudson (tjh@cryptsoft.com).
- * 
- * Copyright remains Eric Young's, and as such any Copyright notices in
- * the code are not to be removed.
- * If this package is used in a product, Eric Young should be given attribution
- * as the author of the parts of the library used.
- * This can be in the form of a textual message at program startup or
- * in documentation (online or textual) provided with the package.
- * 
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions
- * are met:
- * 1. Redistributions of source code must retain the copyright
- *    notice, this list of conditions and the following disclaimer.
- * 2. Redistributions in binary form must reproduce the above copyright
- *    notice, this list of conditions and the following disclaimer in the
- *    documentation and/or other materials provided with the distribution.
- * 3. All advertising materials mentioning features or use of this software
- *    must display the following acknowledgement:
- *    "This product includes cryptographic software written by
- *     Eric Young (eay@cryptsoft.com)"
- *    The word 'cryptographic' can be left out if the rouines from the library
- *    being used are not cryptographic related :-).
- * 4. If you include any Windows specific code (or a derivative thereof) from 
- *    the apps directory (application code) you must include an acknowledgement:
- *    "This product includes software written by Tim Hudson (tjh@cryptsoft.com)"
- * 
- * THIS SOFTWARE IS PROVIDED BY ERIC YOUNG ``AS IS'' AND
- * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
- * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
- * ARE DISCLAIMED.  IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE
- * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
- * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
- * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
- * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
- * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
- * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
- * SUCH DAMAGE.
- * 
- * The licence and distribution terms for any publically available version or
- * derivative of this code cannot be changed.  i.e. this code cannot simply be
- * copied and put under another distribution licence
- * [including the GNU Public Licence.]
- */
-
-#include "e_os.h"
-#include "des_locl.h"
-#include <assert.h>
-
-/* The input and output are loaded in multiples of 8 bits.
- * What this means is that if you hame numbits=12 and length=2
- * the first 12 bits will be retrieved from the first byte and half
- * the second.  The second 12 bits will come from the 3rd and half the 4th
- * byte.
- */
-/* Until Aug 1 2003 this function did not correctly implement CFB-r, so it
- * will not be compatible with any encryption prior to that date. Ben. */
-void DES_cfb_encrypt(const unsigned char *in, unsigned char *out, int numbits,
-		     long length, DES_key_schedule *schedule, DES_cblock *ivec,
-		     int enc)
-	{
-	register DES_LONG d0,d1,v0,v1;
-	register unsigned long l=length;
-	register int num=numbits/8,n=(numbits+7)/8,i,rem=numbits%8;
-	DES_LONG ti[2];
-	unsigned char *iv;
-#ifndef L_ENDIAN
-	unsigned char ovec[16];
-#else
-	unsigned int  sh[4];
-	unsigned char *ovec=(unsigned char *)sh;
-
-	/* I kind of count that compiler optimizes away this assertioni,*/
-	assert (sizeof(sh[0])==4);	/* as this holds true for all,	*/
-					/* but 16-bit platforms...	*/
-					
-#endif
-
-	if (numbits<=0 || numbits > 64) return;
-	iv = &(*ivec)[0];
-	c2l(iv,v0);
-	c2l(iv,v1);
-	if (enc)
-		{
-		while (l >= (unsigned long)n)
-			{
-			l-=n;
-			ti[0]=v0;
-			ti[1]=v1;
-			DES_encrypt1((DES_LONG *)ti,schedule,DES_ENCRYPT);
-			c2ln(in,d0,d1,n);
-			in+=n;
-			d0^=ti[0];
-			d1^=ti[1];
-			l2cn(d0,d1,out,n);
-			out+=n;
-			/* 30-08-94 - eay - changed because l>>32 and
-			 * l<<32 are bad under gcc :-( */
-			if (numbits == 32)
-				{ v0=v1; v1=d0; }
-			else if (numbits == 64)
-				{ v0=d0; v1=d1; }
-			else
-				{
-#ifndef L_ENDIAN
-				iv=&ovec[0];
-				l2c(v0,iv);
-				l2c(v1,iv);
-				l2c(d0,iv);
-				l2c(d1,iv);
-#else
-				sh[0]=v0, sh[1]=v1, sh[2]=d0, sh[3]=d1;
-#endif
-				if (rem==0)
-					memmove(ovec,ovec+num,8);
-				else
-					for(i=0 ; i < 8 ; ++i)
-						ovec[i]=ovec[i+num]<<rem |
-							ovec[i+num+1]>>(8-rem);
-#ifdef L_ENDIAN
-				v0=sh[0], v1=sh[1];
-#else
-				iv=&ovec[0];
-				c2l(iv,v0);
-				c2l(iv,v1);
-#endif
-				}
-			}
-		}
-	else
-		{
-		while (l >= (unsigned long)n)
-			{
-			l-=n;
-			ti[0]=v0;
-			ti[1]=v1;
-			DES_encrypt1((DES_LONG *)ti,schedule,DES_ENCRYPT);
-			c2ln(in,d0,d1,n);
-			in+=n;
-			/* 30-08-94 - eay - changed because l>>32 and
-			 * l<<32 are bad under gcc :-( */
-			if (numbits == 32)
-				{ v0=v1; v1=d0; }
-			else if (numbits == 64)
-				{ v0=d0; v1=d1; }
-			else
-				{
-#ifndef L_ENDIAN
-				iv=&ovec[0];
-				l2c(v0,iv);
-				l2c(v1,iv);
-				l2c(d0,iv);
-				l2c(d1,iv);
-#else
-				sh[0]=v0, sh[1]=v1, sh[2]=d0, sh[3]=d1;
-#endif
-				if (rem==0)
-					memmove(ovec,ovec+num,8);
-				else
-					for(i=0 ; i < 8 ; ++i)
-						ovec[i]=ovec[i+num]<<rem |
-							ovec[i+num+1]>>(8-rem);
-#ifdef L_ENDIAN
-				v0=sh[0], v1=sh[1];
-#else
-				iv=&ovec[0];
-				c2l(iv,v0);
-				c2l(iv,v1);
-#endif
-				}
-			d0^=ti[0];
-			d1^=ti[1];
-			l2cn(d0,d1,out,n);
-			out+=n;
-			}
-		}
-	iv = &(*ivec)[0];
-	l2c(v0,iv);
-	l2c(v1,iv);
-	v0=v1=d0=d1=ti[0]=ti[1]=0;
-	}
-
diff --git a/crypto/openssl/crypto/des/des.c b/crypto/openssl/crypto/des/des.c
deleted file mode 100644
index 343135ff9ec5..000000000000
--- a/crypto/openssl/crypto/des/des.c
+++ /dev/null
@@ -1,932 +0,0 @@
-/* crypto/des/des.c */
-/* Copyright (C) 1995-1998 Eric Young (eay@cryptsoft.com)
- * All rights reserved.
- *
- * This package is an SSL implementation written
- * by Eric Young (eay@cryptsoft.com).
- * The implementation was written so as to conform with Netscapes SSL.
- * 
- * This library is free for commercial and non-commercial use as long as
- * the following conditions are aheared to.  The following conditions
- * apply to all code found in this distribution, be it the RC4, RSA,
- * lhash, DES, etc., code; not just the SSL code.  The SSL documentation
- * included with this distribution is covered by the same copyright terms
- * except that the holder is Tim Hudson (tjh@cryptsoft.com).
- * 
- * Copyright remains Eric Young's, and as such any Copyright notices in
- * the code are not to be removed.
- * If this package is used in a product, Eric Young should be given attribution
- * as the author of the parts of the library used.
- * This can be in the form of a textual message at program startup or
- * in documentation (online or textual) provided with the package.
- * 
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions
- * are met:
- * 1. Redistributions of source code must retain the copyright
- *    notice, this list of conditions and the following disclaimer.
- * 2. Redistributions in binary form must reproduce the above copyright
- *    notice, this list of conditions and the following disclaimer in the
- *    documentation and/or other materials provided with the distribution.
- * 3. All advertising materials mentioning features or use of this software
- *    must display the following acknowledgement:
- *    "This product includes cryptographic software written by
- *     Eric Young (eay@cryptsoft.com)"
- *    The word 'cryptographic' can be left out if the rouines from the library
- *    being used are not cryptographic related :-).
- * 4. If you include any Windows specific code (or a derivative thereof) from 
- *    the apps directory (application code) you must include an acknowledgement:
- *    "This product includes software written by Tim Hudson (tjh@cryptsoft.com)"
- * 
- * THIS SOFTWARE IS PROVIDED BY ERIC YOUNG ``AS IS'' AND
- * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
- * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
- * ARE DISCLAIMED.  IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE
- * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
- * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
- * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
- * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
- * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
- * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
- * SUCH DAMAGE.
- * 
- * The licence and distribution terms for any publically available version or
- * derivative of this code cannot be changed.  i.e. this code cannot simply be
- * copied and put under another distribution licence
- * [including the GNU Public Licence.]
- */
-
-#include <stdio.h>
-#include <stdlib.h>
-#include <string.h>
-#include <openssl/opensslconf.h>
-#ifndef OPENSSL_SYS_MSDOS
-#ifndef OPENSSL_SYS_VMS
-#include OPENSSL_UNISTD
-#else /* OPENSSL_SYS_VMS */
-#ifdef __DECC
-#include <unistd.h>
-#else /* not __DECC */
-#include <math.h>
-#endif /* __DECC */
-#endif /* OPENSSL_SYS_VMS */
-#else /* OPENSSL_SYS_MSDOS */
-#include <io.h>
-#endif
-
-#include <time.h>
-#include "des_ver.h"
-
-#ifdef OPENSSL_SYS_VMS
-#include <types.h>
-#include <stat.h>
-#else
-#ifndef _IRIX
-#include <sys/types.h>
-#endif
-#include <sys/stat.h>
-#endif
-#include <openssl/des.h>
-#include <openssl/rand.h>
-#include <openssl/ui_compat.h>
-
-void usage(void);
-void doencryption(void);
-int uufwrite(unsigned char *data, int size, unsigned int num, FILE *fp);
-void uufwriteEnd(FILE *fp);
-int uufread(unsigned char *out,int size,unsigned int num,FILE *fp);
-int uuencode(unsigned char *in,int num,unsigned char *out);
-int uudecode(unsigned char *in,int num,unsigned char *out);
-void DES_3cbc_encrypt(DES_cblock *input,DES_cblock *output,long length,
-	DES_key_schedule sk1,DES_key_schedule sk2,
-	DES_cblock *ivec1,DES_cblock *ivec2,int enc);
-#ifdef OPENSSL_SYS_VMS
-#define EXIT(a) exit(a&0x10000000L)
-#else
-#define EXIT(a) exit(a)
-#endif
-
-#define BUFSIZE (8*1024)
-#define VERIFY  1
-#define KEYSIZ	8
-#define KEYSIZB 1024 /* should hit tty line limit first :-) */
-char key[KEYSIZB+1];
-int do_encrypt,longk=0;
-FILE *DES_IN,*DES_OUT,*CKSUM_OUT;
-char uuname[200];
-unsigned char uubuf[50];
-int uubufnum=0;
-#define INUUBUFN	(45*100)
-#define OUTUUBUF	(65*100)
-unsigned char b[OUTUUBUF];
-unsigned char bb[300];
-DES_cblock cksum={0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00};
-char cksumname[200]="";
-
-int vflag,cflag,eflag,dflag,kflag,bflag,fflag,sflag,uflag,flag3,hflag,error;
-
-int main(int argc, char **argv)
-	{
-	int i;
-	struct stat ins,outs;
-	char *p;
-	char *in=NULL,*out=NULL;
-
-	vflag=cflag=eflag=dflag=kflag=hflag=bflag=fflag=sflag=uflag=flag3=0;
-	error=0;
-	memset(key,0,sizeof(key));
-
-	for (i=1; i<argc; i++)
-		{
-		p=argv[i];
-		if ((p[0] == '-') && (p[1] != '\0'))
-			{
-			p++;
-			while (*p)
-				{
-				switch (*(p++))
-					{
-				case '3':
-					flag3=1;
-					longk=1;
-					break;
-				case 'c':
-					cflag=1;
-					strncpy(cksumname,p,200);
-					cksumname[sizeof(cksumname)-1]='\0';
-					p+=strlen(cksumname);
-					break;
-				case 'C':
-					cflag=1;
-					longk=1;
-					strncpy(cksumname,p,200);
-					cksumname[sizeof(cksumname)-1]='\0';
-					p+=strlen(cksumname);
-					break;
-				case 'e':
-					eflag=1;
-					break;
-				case 'v':
-					vflag=1;
-					break;
-				case 'E':
-					eflag=1;
-					longk=1;
-					break;
-				case 'd':
-					dflag=1;
-					break;
-				case 'D':
-					dflag=1;
-					longk=1;
-					break;
-				case 'b':
-					bflag=1;
-					break;
-				case 'f':
-					fflag=1;
-					break;
-				case 's':
-					sflag=1;
-					break;
-				case 'u':
-					uflag=1;
-					strncpy(uuname,p,200);
-					uuname[sizeof(uuname)-1]='\0';
-					p+=strlen(uuname);
-					break;
-				case 'h':
-					hflag=1;
-					break;
-				case 'k':
-					kflag=1;
-					if ((i+1) == argc)
-						{
-						fputs("must have a key with the -k option\n",stderr);
-						error=1;
-						}
-					else
-						{
-						int j;
-
-						i++;
-						strncpy(key,argv[i],KEYSIZB);
-						for (j=strlen(argv[i])-1; j>=0; j--)
-							argv[i][j]='\0';
-						}
-					break;
-				default:
-					fprintf(stderr,"'%c' unknown flag\n",p[-1]);
-					error=1;
-					break;
-					}
-				}
-			}
-		else
-			{
-			if (in == NULL)
-				in=argv[i];
-			else if (out == NULL)
-				out=argv[i];
-			else
-				error=1;
-			}
-		}
-	if (error) usage();
-	/* We either
-	 * do checksum or
-	 * do encrypt or
-	 * do decrypt or
-	 * do decrypt then ckecksum or
-	 * do checksum then encrypt
-	 */
-	if (((eflag+dflag) == 1) || cflag)
-		{
-		if (eflag) do_encrypt=DES_ENCRYPT;
-		if (dflag) do_encrypt=DES_DECRYPT;
-		}
-	else
-		{
-		if (vflag) 
-			{
-#ifndef _Windows			
-			fprintf(stderr,"des(1) built with %s\n",libdes_version);
-#endif			
-			EXIT(1);
-			}
-		else usage();
-		}
-
-#ifndef _Windows			
-	if (vflag) fprintf(stderr,"des(1) built with %s\n",libdes_version);
-#endif			
-	if (	(in != NULL) &&
-		(out != NULL) &&
-#ifndef OPENSSL_SYS_MSDOS
-		(stat(in,&ins) != -1) &&
-		(stat(out,&outs) != -1) &&
-		(ins.st_dev == outs.st_dev) &&
-		(ins.st_ino == outs.st_ino))
-#else /* OPENSSL_SYS_MSDOS */
-		(strcmp(in,out) == 0))
-#endif
-			{
-			fputs("input and output file are the same\n",stderr);
-			EXIT(3);
-			}
-
-	if (!kflag)
-		if (des_read_pw_string(key,KEYSIZB+1,"Enter key:",eflag?VERIFY:0))
-			{
-			fputs("password error\n",stderr);
-			EXIT(2);
-			}
-
-	if (in == NULL)
-		DES_IN=stdin;
-	else if ((DES_IN=fopen(in,"r")) == NULL)
-		{
-		perror("opening input file");
-		EXIT(4);
-		}
-
-	CKSUM_OUT=stdout;
-	if (out == NULL)
-		{
-		DES_OUT=stdout;
-		CKSUM_OUT=stderr;
-		}
-	else if ((DES_OUT=fopen(out,"w")) == NULL)
-		{
-		perror("opening output file");
-		EXIT(5);
-		}
-
-#ifdef OPENSSL_SYS_MSDOS
-	/* This should set the file to binary mode. */
-	{
-#include <fcntl.h>
-	if (!(uflag && dflag))
-		setmode(fileno(DES_IN),O_BINARY);
-	if (!(uflag && eflag))
-		setmode(fileno(DES_OUT),O_BINARY);
-	}
-#endif
-
-	doencryption();
-	fclose(DES_IN);
-	fclose(DES_OUT);
-	EXIT(0);
-	}
-
-void usage(void)
-	{
-	char **u;
-	static const char *Usage[]={
-"des <options> [input-file [output-file]]",
-"options:",
-"-v         : des(1) version number",
-"-e         : encrypt using SunOS compatible user key to DES key conversion.",
-"-E         : encrypt ",
-"-d         : decrypt using SunOS compatible user key to DES key conversion.",
-"-D         : decrypt ",
-"-c[ckname] : generate a cbc_cksum using SunOS compatible user key to",
-"             DES key conversion and output to ckname (stdout default,",
-"             stderr if data being output on stdout).  The checksum is",
-"             generated before encryption and after decryption if used",
-"             in conjunction with -[eEdD].",
-"-C[ckname] : generate a cbc_cksum as for -c but compatible with -[ED].",
-"-k key     : use key 'key'",
-"-h         : the key that is entered will be a hexadecimal number",
-"             that is used directly as the des key",
-"-u[uuname] : input file is uudecoded if -[dD] or output uuencoded data if -[eE]",
-"             (uuname is the filename to put in the uuencode header).",
-"-b         : encrypt using DES in ecb encryption mode, the default is cbc mode.",
-"-3         : encrypt using triple DES encryption.  This uses 2 keys",
-"             generated from the input key.  If the input key is less",
-"             than 8 characters long, this is equivalent to normal",
-"             encryption.  Default is triple cbc, -b makes it triple ecb.",
-NULL
-};
-	for (u=(char **)Usage; *u; u++)
-		{
-		fputs(*u,stderr);
-		fputc('\n',stderr);
-		}
-
-	EXIT(1);
-	}
-
-void doencryption(void)
-	{
-#ifdef _LIBC
-	extern unsigned long time();
-#endif
-
-	register int i;
-	DES_key_schedule ks,ks2;
-	DES_cblock iv,iv2;
-	char *p;
-	int num=0,j,k,l,rem,ll,len,last,ex=0;
-	DES_cblock kk,k2;
-	FILE *O;
-	int Exit=0;
-#ifndef OPENSSL_SYS_MSDOS
-	static unsigned char buf[BUFSIZE+8],obuf[BUFSIZE+8];
-#else
-	static unsigned char *buf=NULL,*obuf=NULL;
-
-	if (buf == NULL)
-		{
-		if (    (( buf=OPENSSL_malloc(BUFSIZE+8)) == NULL) ||
-			((obuf=OPENSSL_malloc(BUFSIZE+8)) == NULL))
-			{
-			fputs("Not enough memory\n",stderr);
-			Exit=10;
-			goto problems;
-			}
-		}
-#endif
-
-	if (hflag)
-		{
-		j=(flag3?16:8);
-		p=key;
-		for (i=0; i<j; i++)
-			{
-			k=0;
-			if ((*p <= '9') && (*p >= '0'))
-				k=(*p-'0')<<4;
-			else if ((*p <= 'f') && (*p >= 'a'))
-				k=(*p-'a'+10)<<4;
-			else if ((*p <= 'F') && (*p >= 'A'))
-				k=(*p-'A'+10)<<4;
-			else
-				{
-				fputs("Bad hex key\n",stderr);
-				Exit=9;
-				goto problems;
-				}
-			p++;
-			if ((*p <= '9') && (*p >= '0'))
-				k|=(*p-'0');
-			else if ((*p <= 'f') && (*p >= 'a'))
-				k|=(*p-'a'+10);
-			else if ((*p <= 'F') && (*p >= 'A'))
-				k|=(*p-'A'+10);
-			else
-				{
-				fputs("Bad hex key\n",stderr);
-				Exit=9;
-				goto problems;
-				}
-			p++;
-			if (i < 8)
-				kk[i]=k;
-			else
-				k2[i-8]=k;
-			}
-		DES_set_key_unchecked(&k2,&ks2);
-		OPENSSL_cleanse(k2,sizeof(k2));
-		}
-	else if (longk || flag3)
-		{
-		if (flag3)
-			{
-			DES_string_to_2keys(key,&kk,&k2);
-			DES_set_key_unchecked(&k2,&ks2);
-			OPENSSL_cleanse(k2,sizeof(k2));
-			}
-		else
-			DES_string_to_key(key,&kk);
-		}
-	else
-		for (i=0; i<KEYSIZ; i++)
-			{
-			l=0;
-			k=key[i];
-			for (j=0; j<8; j++)
-				{
-				if (k&1) l++;
-				k>>=1;
-				}
-			if (l & 1)
-				kk[i]=key[i]&0x7f;
-			else
-				kk[i]=key[i]|0x80;
-			}
-
-	DES_set_key_unchecked(&kk,&ks);
-	OPENSSL_cleanse(key,sizeof(key));
-	OPENSSL_cleanse(kk,sizeof(kk));
-	/* woops - A bug that does not showup under unix :-( */
-	memset(iv,0,sizeof(iv));
-	memset(iv2,0,sizeof(iv2));
-
-	l=1;
-	rem=0;
-	/* first read */
-	if (eflag || (!dflag && cflag))
-		{
-		for (;;)
-			{
-			num=l=fread(&(buf[rem]),1,BUFSIZE,DES_IN);
-			l+=rem;
-			num+=rem;
-			if (l < 0)
-				{
-				perror("read error");
-				Exit=6;
-				goto problems;
-				}
-
-			rem=l%8;
-			len=l-rem;
-			if (feof(DES_IN))
-				{
-				for (i=7-rem; i>0; i--)
-					RAND_pseudo_bytes(buf + l++, 1);
-				buf[l++]=rem;
-				ex=1;
-				len+=rem;
-				}
-			else
-				l-=rem;
-
-			if (cflag)
-				{
-				DES_cbc_cksum(buf,&cksum,
-					(long)len,&ks,&cksum);
-				if (!eflag)
-					{
-					if (feof(DES_IN)) break;
-					else continue;
-					}
-				}
-
-			if (bflag && !flag3)
-				for (i=0; i<l; i+=8)
-					DES_ecb_encrypt(
-						(DES_cblock *)&(buf[i]),
-						(DES_cblock *)&(obuf[i]),
-						&ks,do_encrypt);
-			else if (flag3 && bflag)
-				for (i=0; i<l; i+=8)
-					DES_ecb2_encrypt(
-						(DES_cblock *)&(buf[i]),
-						(DES_cblock *)&(obuf[i]),
-						&ks,&ks2,do_encrypt);
-			else if (flag3 && !bflag)
-				{
-				char tmpbuf[8];
-
-				if (rem) memcpy(tmpbuf,&(buf[l]),
-					(unsigned int)rem);
-				DES_3cbc_encrypt(
-					(DES_cblock *)buf,(DES_cblock *)obuf,
-					(long)l,ks,ks2,&iv,
-					&iv2,do_encrypt);
-				if (rem) memcpy(&(buf[l]),tmpbuf,
-					(unsigned int)rem);
-				}
-			else
-				{
-				DES_cbc_encrypt(
-					buf,obuf,
-					(long)l,&ks,&iv,do_encrypt);
-				if (l >= 8) memcpy(iv,&(obuf[l-8]),8);
-				}
-			if (rem) memcpy(buf,&(buf[l]),(unsigned int)rem);
-
-			i=0;
-			while (i < l)
-				{
-				if (uflag)
-					j=uufwrite(obuf,1,(unsigned int)l-i,
-						DES_OUT);
-				else
-					j=fwrite(obuf,1,(unsigned int)l-i,
-						DES_OUT);
-				if (j == -1)
-					{
-					perror("Write error");
-					Exit=7;
-					goto problems;
-					}
-				i+=j;
-				}
-			if (feof(DES_IN))
-				{
-				if (uflag) uufwriteEnd(DES_OUT);
-				break;
-				}
-			}
-		}
-	else /* decrypt */
-		{
-		ex=1;
-		for (;;)
-			{
-			if (ex) {
-				if (uflag)
-					l=uufread(buf,1,BUFSIZE,DES_IN);
-				else
-					l=fread(buf,1,BUFSIZE,DES_IN);
-				ex=0;
-				rem=l%8;
-				l-=rem;
-				}
-			if (l < 0)
-				{
-				perror("read error");
-				Exit=6;
-				goto problems;
-				}
-
-			if (bflag && !flag3)
-				for (i=0; i<l; i+=8)
-					DES_ecb_encrypt(
-						(DES_cblock *)&(buf[i]),
-						(DES_cblock *)&(obuf[i]),
-						&ks,do_encrypt);
-			else if (flag3 && bflag)
-				for (i=0; i<l; i+=8)
-					DES_ecb2_encrypt(
-						(DES_cblock *)&(buf[i]),
-						(DES_cblock *)&(obuf[i]),
-						&ks,&ks2,do_encrypt);
-			else if (flag3 && !bflag)
-				{
-				DES_3cbc_encrypt(
-					(DES_cblock *)buf,(DES_cblock *)obuf,
-					(long)l,ks,ks2,&iv,
-					&iv2,do_encrypt);
-				}
-			else
-				{
-				DES_cbc_encrypt(
-					buf,obuf,
-				 	(long)l,&ks,&iv,do_encrypt);
-				if (l >= 8) memcpy(iv,&(buf[l-8]),8);
-				}
-
-			if (uflag)
-				ll=uufread(&(buf[rem]),1,BUFSIZE,DES_IN);
-			else
-				ll=fread(&(buf[rem]),1,BUFSIZE,DES_IN);
-			ll+=rem;
-			rem=ll%8;
-			ll-=rem;
-			if (feof(DES_IN) && (ll == 0))
-				{
-				last=obuf[l-1];
-
-				if ((last > 7) || (last < 0))
-					{
-					fputs("The file was not decrypted correctly.\n",
-						stderr);
-					Exit=8;
-					last=0;
-					}
-				l=l-8+last;
-				}
-			i=0;
-			if (cflag) DES_cbc_cksum(obuf,
-				(DES_cblock *)cksum,(long)l/8*8,&ks,
-				(DES_cblock *)cksum);
-			while (i != l)
-				{
-				j=fwrite(obuf,1,(unsigned int)l-i,DES_OUT);
-				if (j == -1)
-					{
-					perror("Write error");
-					Exit=7;
-					goto problems;
-					}
-				i+=j;
-				}
-			l=ll;
-			if ((l == 0) && feof(DES_IN)) break;
-			}
-		}
-	if (cflag)
-		{
-		l=0;
-		if (cksumname[0] != '\0')
-			{
-			if ((O=fopen(cksumname,"w")) != NULL)
-				{
-				CKSUM_OUT=O;
-				l=1;
-				}
-			}
-		for (i=0; i<8; i++)
-			fprintf(CKSUM_OUT,"%02X",cksum[i]);
-		fprintf(CKSUM_OUT,"\n");
-		if (l) fclose(CKSUM_OUT);
-		}
-problems:
-	OPENSSL_cleanse(buf,sizeof(buf));
-	OPENSSL_cleanse(obuf,sizeof(obuf));
-	OPENSSL_cleanse(&ks,sizeof(ks));
-	OPENSSL_cleanse(&ks2,sizeof(ks2));
-	OPENSSL_cleanse(iv,sizeof(iv));
-	OPENSSL_cleanse(iv2,sizeof(iv2));
-	OPENSSL_cleanse(kk,sizeof(kk));
-	OPENSSL_cleanse(k2,sizeof(k2));
-	OPENSSL_cleanse(uubuf,sizeof(uubuf));
-	OPENSSL_cleanse(b,sizeof(b));
-	OPENSSL_cleanse(bb,sizeof(bb));
-	OPENSSL_cleanse(cksum,sizeof(cksum));
-	if (Exit) EXIT(Exit);
-	}
-
-/*    We ignore this parameter but it should be > ~50 I believe    */
-int uufwrite(unsigned char *data, int size, unsigned int num, FILE *fp)
-	{
-	int i,j,left,rem,ret=num;
-	static int start=1;
-
-	if (start)
-		{
-		fprintf(fp,"begin 600 %s\n",
-			(uuname[0] == '\0')?"text.d":uuname);
-		start=0;
-		}
-
-	if (uubufnum)
-		{
-		if (uubufnum+num < 45)
-			{
-			memcpy(&(uubuf[uubufnum]),data,(unsigned int)num);
-			uubufnum+=num;
-			return(num);
-			}
-		else
-			{
-			i=45-uubufnum;
-			memcpy(&(uubuf[uubufnum]),data,(unsigned int)i);
-			j=uuencode((unsigned char *)uubuf,45,b);
-			fwrite(b,1,(unsigned int)j,fp);
-			uubufnum=0;
-			data+=i;
-			num-=i;
-			}
-		}
-
-	for (i=0; i<(((int)num)-INUUBUFN); i+=INUUBUFN)
-		{
-		j=uuencode(&(data[i]),INUUBUFN,b);
-		fwrite(b,1,(unsigned int)j,fp);
-		}
-	rem=(num-i)%45;
-	left=(num-i-rem);
-	if (left)
-		{
-		j=uuencode(&(data[i]),left,b);
-		fwrite(b,1,(unsigned int)j,fp);
-		i+=left;
-		}
-	if (i != num)
-		{
-		memcpy(uubuf,&(data[i]),(unsigned int)rem);
-		uubufnum=rem;
-		}
-	return(ret);
-	}
-
-void uufwriteEnd(FILE *fp)
-	{
-	int j;
-	static const char *end=" \nend\n";
-
-	if (uubufnum != 0)
-		{
-		uubuf[uubufnum]='\0';
-		uubuf[uubufnum+1]='\0';
-		uubuf[uubufnum+2]='\0';
-		j=uuencode(uubuf,uubufnum,b);
-		fwrite(b,1,(unsigned int)j,fp);
-		}
-	fwrite(end,1,strlen(end),fp);
-	}
-
-/* int size:  should always be > ~ 60; I actually ignore this parameter :-)    */
-int uufread(unsigned char *out, int size, unsigned int num, FILE *fp)
-	{
-	int i,j,tot;
-	static int done=0;
-	static int valid=0;
-	static int start=1;
-
-	if (start)
-		{
-		for (;;)
-			{
-			b[0]='\0';
-			fgets((char *)b,300,fp);
-			if (b[0] == '\0')
-				{
-				fprintf(stderr,"no 'begin' found in uuencoded input\n");
-				return(-1);
-				}
-			if (strncmp((char *)b,"begin ",6) == 0) break;
-			}
-		start=0;
-		}
-	if (done) return(0);
-	tot=0;
-	if (valid)
-		{
-		memcpy(out,bb,(unsigned int)valid);
-		tot=valid;
-		valid=0;
-		}
-	for (;;)
-		{
-		b[0]='\0';
-		fgets((char *)b,300,fp);
-		if (b[0] == '\0') break;
-		i=strlen((char *)b);
-		if ((b[0] == 'e') && (b[1] == 'n') && (b[2] == 'd'))
-			{
-			done=1;
-			while (!feof(fp))
-				{
-				fgets((char *)b,300,fp);
-				}
-			break;
-			}
-		i=uudecode(b,i,bb);
-		if (i < 0) break;
-		if ((i+tot+8) > num)
-			{
-			/* num to copy to make it a multiple of 8 */
-			j=(num/8*8)-tot-8;
-			memcpy(&(out[tot]),bb,(unsigned int)j);
-			tot+=j;
-			memcpy(bb,&(bb[j]),(unsigned int)i-j);
-			valid=i-j;
-			break;
-			}
-		memcpy(&(out[tot]),bb,(unsigned int)i);
-		tot+=i;
-		}
-	return(tot);
-	}
-
-#define ccc2l(c,l)      (l =((DES_LONG)(*((c)++)))<<16, \
-			 l|=((DES_LONG)(*((c)++)))<< 8, \
-		 	 l|=((DES_LONG)(*((c)++))))
-
-#define l2ccc(l,c)      (*((c)++)=(unsigned char)(((l)>>16)&0xff), \
-                    *((c)++)=(unsigned char)(((l)>> 8)&0xff), \
-                    *((c)++)=(unsigned char)(((l)    )&0xff))
-
-
-int uuencode(unsigned char *in, int num, unsigned char *out)
-	{
-	int j,i,n,tot=0;
-	DES_LONG l;
-	register unsigned char *p;
-	p=out;
-
-	for (j=0; j<num; j+=45)
-		{
-		if (j+45 > num)
-			i=(num-j);
-		else	i=45;
-		*(p++)=i+' ';
-		for (n=0; n<i; n+=3)
-			{
-			ccc2l(in,l);
-			*(p++)=((l>>18)&0x3f)+' ';
-			*(p++)=((l>>12)&0x3f)+' ';
-			*(p++)=((l>> 6)&0x3f)+' ';
-			*(p++)=((l    )&0x3f)+' ';
-			tot+=4;
-			}
-		*(p++)='\n';
-		tot+=2;
-		}
-	*p='\0';
-	l=0;
-	return(tot);
-	}
-
-int uudecode(unsigned char *in, int num, unsigned char *out)
-	{
-	int j,i,k;
-	unsigned int n=0,space=0;
-	DES_LONG l;
-	DES_LONG w,x,y,z;
-	unsigned int blank=(unsigned int)'\n'-' ';
-
-	for (j=0; j<num; )
-		{
-		n= *(in++)-' ';
-		if (n == blank)
-			{
-			n=0;
-			in--;
-			}
-		if (n > 60)
-			{
-			fprintf(stderr,"uuencoded line length too long\n");
-			return(-1);
-			}
-		j++;
-
-		for (i=0; i<n; j+=4,i+=3)
-			{
-			/* the following is for cases where spaces are
-			 * removed from lines.
-			 */
-			if (space)
-				{
-				w=x=y=z=0;
-				}
-			else
-				{
-				w= *(in++)-' ';
-				x= *(in++)-' ';
-				y= *(in++)-' ';
-				z= *(in++)-' ';
-				}
-			if ((w > 63) || (x > 63) || (y > 63) || (z > 63))
-				{
-				k=0;
-				if (w == blank) k=1;
-				if (x == blank) k=2;
-				if (y == blank) k=3;
-				if (z == blank) k=4;
-				space=1;
-				switch (k) {
-				case 1:	w=0; in--;
-				case 2: x=0; in--;
-				case 3: y=0; in--;
-				case 4: z=0; in--;
-					break;
-				case 0:
-					space=0;
-					fprintf(stderr,"bad uuencoded data values\n");
-					w=x=y=z=0;
-					return(-1);
-					break;
-					}
-				}
-			l=(w<<18)|(x<<12)|(y<< 6)|(z    );
-			l2ccc(l,out);
-			}
-		if (*(in++) != '\n')
-			{
-			fprintf(stderr,"missing nl in uuencoded line\n");
-			w=x=y=z=0;
-			return(-1);
-			}
-		j++;
-		}
-	*out='\0';
-	w=x=y=z=0;
-	return(n);
-	}
diff --git a/crypto/openssl/crypto/des/des.h b/crypto/openssl/crypto/des/des.h
deleted file mode 100644
index 3cbc2b568e91..000000000000
--- a/crypto/openssl/crypto/des/des.h
+++ /dev/null
@@ -1,244 +0,0 @@
-/* crypto/des/des.h */
-/* Copyright (C) 1995-1997 Eric Young (eay@cryptsoft.com)
- * All rights reserved.
- *
- * This package is an SSL implementation written
- * by Eric Young (eay@cryptsoft.com).
- * The implementation was written so as to conform with Netscapes SSL.
- * 
- * This library is free for commercial and non-commercial use as long as
- * the following conditions are aheared to.  The following conditions
- * apply to all code found in this distribution, be it the RC4, RSA,
- * lhash, DES, etc., code; not just the SSL code.  The SSL documentation
- * included with this distribution is covered by the same copyright terms
- * except that the holder is Tim Hudson (tjh@cryptsoft.com).
- * 
- * Copyright remains Eric Young's, and as such any Copyright notices in
- * the code are not to be removed.
- * If this package is used in a product, Eric Young should be given attribution
- * as the author of the parts of the library used.
- * This can be in the form of a textual message at program startup or
- * in documentation (online or textual) provided with the package.
- * 
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions
- * are met:
- * 1. Redistributions of source code must retain the copyright
- *    notice, this list of conditions and the following disclaimer.
- * 2. Redistributions in binary form must reproduce the above copyright
- *    notice, this list of conditions and the following disclaimer in the
- *    documentation and/or other materials provided with the distribution.
- * 3. All advertising materials mentioning features or use of this software
- *    must display the following acknowledgement:
- *    "This product includes cryptographic software written by
- *     Eric Young (eay@cryptsoft.com)"
- *    The word 'cryptographic' can be left out if the rouines from the library
- *    being used are not cryptographic related :-).
- * 4. If you include any Windows specific code (or a derivative thereof) from 
- *    the apps directory (application code) you must include an acknowledgement:
- *    "This product includes software written by Tim Hudson (tjh@cryptsoft.com)"
- * 
- * THIS SOFTWARE IS PROVIDED BY ERIC YOUNG ``AS IS'' AND
- * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
- * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
- * ARE DISCLAIMED.  IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE
- * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
- * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
- * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
- * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
- * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
- * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
- * SUCH DAMAGE.
- * 
- * The licence and distribution terms for any publically available version or
- * derivative of this code cannot be changed.  i.e. this code cannot simply be
- * copied and put under another distribution licence
- * [including the GNU Public Licence.]
- */
-
-#ifndef HEADER_NEW_DES_H
-#define HEADER_NEW_DES_H
-
-#include <openssl/e_os2.h>	/* OPENSSL_EXTERN, OPENSSL_NO_DES,
-				   DES_LONG (via openssl/opensslconf.h */
-
-#ifdef OPENSSL_NO_DES
-#error DES is disabled.
-#endif
-
-#ifdef OPENSSL_BUILD_SHLIBCRYPTO
-# undef OPENSSL_EXTERN
-# define OPENSSL_EXTERN OPENSSL_EXPORT
-#endif
-
-#ifdef  __cplusplus
-extern "C" {
-#endif
-
-typedef unsigned char DES_cblock[8];
-typedef /* const */ unsigned char const_DES_cblock[8];
-/* With "const", gcc 2.8.1 on Solaris thinks that DES_cblock *
- * and const_DES_cblock * are incompatible pointer types. */
-
-typedef struct DES_ks
-    {
-    union
-	{
-	DES_cblock cblock;
-	/* make sure things are correct size on machines with
-	 * 8 byte longs */
-	DES_LONG deslong[2];
-	} ks[16];
-    } DES_key_schedule;
-
-#ifndef OPENSSL_DISABLE_OLD_DES_SUPPORT
-# ifndef OPENSSL_ENABLE_OLD_DES_SUPPORT
-#  define OPENSSL_ENABLE_OLD_DES_SUPPORT
-# endif
-#endif
-
-#ifdef OPENSSL_ENABLE_OLD_DES_SUPPORT
-# include <openssl/des_old.h>
-#endif
-
-#define DES_KEY_SZ 	(sizeof(DES_cblock))
-#define DES_SCHEDULE_SZ (sizeof(DES_key_schedule))
-
-#define DES_ENCRYPT	1
-#define DES_DECRYPT	0
-
-#define DES_CBC_MODE	0
-#define DES_PCBC_MODE	1
-
-#define DES_ecb2_encrypt(i,o,k1,k2,e) \
-	DES_ecb3_encrypt((i),(o),(k1),(k2),(k1),(e))
-
-#define DES_ede2_cbc_encrypt(i,o,l,k1,k2,iv,e) \
-	DES_ede3_cbc_encrypt((i),(o),(l),(k1),(k2),(k1),(iv),(e))
-
-#define DES_ede2_cfb64_encrypt(i,o,l,k1,k2,iv,n,e) \
-	DES_ede3_cfb64_encrypt((i),(o),(l),(k1),(k2),(k1),(iv),(n),(e))
-
-#define DES_ede2_ofb64_encrypt(i,o,l,k1,k2,iv,n) \
-	DES_ede3_ofb64_encrypt((i),(o),(l),(k1),(k2),(k1),(iv),(n))
-
-OPENSSL_DECLARE_GLOBAL(int,DES_check_key);	/* defaults to false */
-#define DES_check_key OPENSSL_GLOBAL_REF(DES_check_key)
-OPENSSL_DECLARE_GLOBAL(int,DES_rw_mode);	/* defaults to DES_PCBC_MODE */
-#define DES_rw_mode OPENSSL_GLOBAL_REF(DES_rw_mode)
-
-const char *DES_options(void);
-void DES_ecb3_encrypt(const_DES_cblock *input, DES_cblock *output,
-		      DES_key_schedule *ks1,DES_key_schedule *ks2,
-		      DES_key_schedule *ks3, int enc);
-DES_LONG DES_cbc_cksum(const unsigned char *input,DES_cblock *output,
-		       long length,DES_key_schedule *schedule,
-		       const_DES_cblock *ivec);
-/* DES_cbc_encrypt does not update the IV!  Use DES_ncbc_encrypt instead. */
-void DES_cbc_encrypt(const unsigned char *input,unsigned char *output,
-		     long length,DES_key_schedule *schedule,DES_cblock *ivec,
-		     int enc);
-void DES_ncbc_encrypt(const unsigned char *input,unsigned char *output,
-		      long length,DES_key_schedule *schedule,DES_cblock *ivec,
-		      int enc);
-void DES_xcbc_encrypt(const unsigned char *input,unsigned char *output,
-		      long length,DES_key_schedule *schedule,DES_cblock *ivec,
-		      const_DES_cblock *inw,const_DES_cblock *outw,int enc);
-void DES_cfb_encrypt(const unsigned char *in,unsigned char *out,int numbits,
-		     long length,DES_key_schedule *schedule,DES_cblock *ivec,
-		     int enc);
-void DES_ecb_encrypt(const_DES_cblock *input,DES_cblock *output,
-		     DES_key_schedule *ks,int enc);
-
-/* 	This is the DES encryption function that gets called by just about
-	every other DES routine in the library.  You should not use this
-	function except to implement 'modes' of DES.  I say this because the
-	functions that call this routine do the conversion from 'char *' to
-	long, and this needs to be done to make sure 'non-aligned' memory
-	access do not occur.  The characters are loaded 'little endian'.
-	Data is a pointer to 2 unsigned long's and ks is the
-	DES_key_schedule to use.  enc, is non zero specifies encryption,
-	zero if decryption. */
-void DES_encrypt1(DES_LONG *data,DES_key_schedule *ks, int enc);
-
-/* 	This functions is the same as DES_encrypt1() except that the DES
-	initial permutation (IP) and final permutation (FP) have been left
-	out.  As for DES_encrypt1(), you should not use this function.
-	It is used by the routines in the library that implement triple DES.
-	IP() DES_encrypt2() DES_encrypt2() DES_encrypt2() FP() is the same
-	as DES_encrypt1() DES_encrypt1() DES_encrypt1() except faster :-). */
-void DES_encrypt2(DES_LONG *data,DES_key_schedule *ks, int enc);
-
-void DES_encrypt3(DES_LONG *data, DES_key_schedule *ks1,
-		  DES_key_schedule *ks2, DES_key_schedule *ks3);
-void DES_decrypt3(DES_LONG *data, DES_key_schedule *ks1,
-		  DES_key_schedule *ks2, DES_key_schedule *ks3);
-void DES_ede3_cbc_encrypt(const unsigned char *input,unsigned char *output, 
-			  long length,
-			  DES_key_schedule *ks1,DES_key_schedule *ks2,
-			  DES_key_schedule *ks3,DES_cblock *ivec,int enc);
-void DES_ede3_cbcm_encrypt(const unsigned char *in,unsigned char *out,
-			   long length,
-			   DES_key_schedule *ks1,DES_key_schedule *ks2,
-			   DES_key_schedule *ks3,
-			   DES_cblock *ivec1,DES_cblock *ivec2,
-			   int enc);
-void DES_ede3_cfb64_encrypt(const unsigned char *in,unsigned char *out,
-			    long length,DES_key_schedule *ks1,
-			    DES_key_schedule *ks2,DES_key_schedule *ks3,
-			    DES_cblock *ivec,int *num,int enc);
-void DES_ede3_cfb_encrypt(const unsigned char *in,unsigned char *out,
-			  int numbits,long length,DES_key_schedule *ks1,
-			  DES_key_schedule *ks2,DES_key_schedule *ks3,
-			  DES_cblock *ivec,int enc);
-void DES_ede3_ofb64_encrypt(const unsigned char *in,unsigned char *out,
-			    long length,DES_key_schedule *ks1,
-			    DES_key_schedule *ks2,DES_key_schedule *ks3,
-			    DES_cblock *ivec,int *num);
-
-void DES_xwhite_in2out(const_DES_cblock *DES_key,const_DES_cblock *in_white,
-		       DES_cblock *out_white);
-
-int DES_enc_read(int fd,void *buf,int len,DES_key_schedule *sched,
-		 DES_cblock *iv);
-int DES_enc_write(int fd,const void *buf,int len,DES_key_schedule *sched,
-		  DES_cblock *iv);
-char *DES_fcrypt(const char *buf,const char *salt, char *ret);
-char *DES_crypt(const char *buf,const char *salt);
-void DES_ofb_encrypt(const unsigned char *in,unsigned char *out,int numbits,
-		     long length,DES_key_schedule *schedule,DES_cblock *ivec);
-void DES_pcbc_encrypt(const unsigned char *input,unsigned char *output,
-		      long length,DES_key_schedule *schedule,DES_cblock *ivec,
-		      int enc);
-DES_LONG DES_quad_cksum(const unsigned char *input,DES_cblock output[],
-			long length,int out_count,DES_cblock *seed);
-int DES_random_key(DES_cblock *ret);
-void DES_set_odd_parity(DES_cblock *key);
-int DES_check_key_parity(const_DES_cblock *key);
-int DES_is_weak_key(const_DES_cblock *key);
-/* DES_set_key (= set_key = DES_key_sched = key_sched) calls
- * DES_set_key_checked if global variable DES_check_key is set,
- * DES_set_key_unchecked otherwise. */
-int DES_set_key(const_DES_cblock *key,DES_key_schedule *schedule);
-int DES_key_sched(const_DES_cblock *key,DES_key_schedule *schedule);
-int DES_set_key_checked(const_DES_cblock *key,DES_key_schedule *schedule);
-void DES_set_key_unchecked(const_DES_cblock *key,DES_key_schedule *schedule);
-void DES_string_to_key(const char *str,DES_cblock *key);
-void DES_string_to_2keys(const char *str,DES_cblock *key1,DES_cblock *key2);
-void DES_cfb64_encrypt(const unsigned char *in,unsigned char *out,long length,
-		       DES_key_schedule *schedule,DES_cblock *ivec,int *num,
-		       int enc);
-void DES_ofb64_encrypt(const unsigned char *in,unsigned char *out,long length,
-		       DES_key_schedule *schedule,DES_cblock *ivec,int *num);
-
-int DES_read_password(DES_cblock *key, const char *prompt, int verify);
-int DES_read_2passwords(DES_cblock *key1, DES_cblock *key2, const char *prompt,
-	int verify);
-
-#define DES_fixup_key_parity DES_set_odd_parity
-
-#ifdef  __cplusplus
-}
-#endif
-
-#endif
diff --git a/crypto/openssl/crypto/des/des.pod b/crypto/openssl/crypto/des/des.pod
deleted file mode 100644
index bf479e83d26b..000000000000
--- a/crypto/openssl/crypto/des/des.pod
+++ /dev/null
@@ -1,217 +0,0 @@
-=pod
-
-=head1 NAME
-
-des - encrypt or decrypt data using Data Encryption Standard
-
-=head1 SYNOPSIS
-
-B<des>
-(
-B<-e>
-|
-B<-E>
-) | (
-B<-d>
-|
-B<-D>
-) | (
-B<->[B<cC>][B<ckname>]
-) |
-[
-B<-b3hfs>
-] [
-B<-k>
-I<key>
-]
-] [
-B<-u>[I<uuname>]
-[
-I<input-file>
-[
-I<output-file>
-] ]
-
-=head1 NOTE
-
-This page describes the B<des> stand-alone program, not the B<openssl des>
-command.
-
-=head1 DESCRIPTION
-
-B<des>
-encrypts and decrypts data using the
-Data Encryption Standard algorithm.
-One of
-B<-e>, B<-E>
-(for encrypt) or
-B<-d>, B<-D>
-(for decrypt) must be specified.
-It is also possible to use
-B<-c>
-or
-B<-C>
-in conjunction or instead of the a encrypt/decrypt option to generate
-a 16 character hexadecimal checksum, generated via the
-I<des_cbc_cksum>.
-
-Two standard encryption modes are supported by the
-B<des>
-program, Cipher Block Chaining (the default) and Electronic Code Book
-(specified with
-B<-b>).
-
-The key used for the DES
-algorithm is obtained by prompting the user unless the
-B<-k>
-I<key>
-option is given.
-If the key is an argument to the
-B<des>
-command, it is potentially visible to users executing
-ps(1)
-or a derivative.  To minimise this possibility,
-B<des>
-takes care to destroy the key argument immediately upon entry.
-If your shell keeps a history file be careful to make sure it is not
-world readable.
-
-Since this program attempts to maintain compatibility with sunOS's
-des(1) command, there are 2 different methods used to convert the user
-supplied key to a des key.
-Whenever and one or more of
-B<-E>, B<-D>, B<-C>
-or
-B<-3>
-options are used, the key conversion procedure will not be compatible
-with the sunOS des(1) version but will use all the user supplied
-character to generate the des key.
-B<des>
-command reads from standard input unless
-I<input-file>
-is specified and writes to standard output unless
-I<output-file>
-is given.
-
-=head1 OPTIONS
-
-=over 4
-
-=item B<-b>
-
-Select ECB
-(eight bytes at a time) encryption mode.
-
-=item B<-3>
-
-Encrypt using triple encryption.
-By default triple cbc encryption is used but if the
-B<-b>
-option is used then triple ECB encryption is performed.
-If the key is less than 8 characters long, the flag has no effect.
-
-=item B<-e>
-
-Encrypt data using an 8 byte key in a manner compatible with sunOS
-des(1).
-
-=item B<-E>
-
-Encrypt data using a key of nearly unlimited length (1024 bytes).
-This will product a more secure encryption.
-
-=item B<-d>
-
-Decrypt data that was encrypted with the B<-e> option.
-
-=item B<-D>
-
-Decrypt data that was encrypted with the B<-E> option.
-
-=item B<-c>
-
-Generate a 16 character hexadecimal cbc checksum and output this to
-stderr.
-If a filename was specified after the
-B<-c>
-option, the checksum is output to that file.
-The checksum is generated using a key generated in a sunOS compatible
-manner.
-
-=item B<-C>
-
-A cbc checksum is generated in the same manner as described for the
-B<-c>
-option but the DES key is generated in the same manner as used for the
-B<-E>
-and
-B<-D>
-options
-
-=item B<-f>
-
-Does nothing - allowed for compatibility with sunOS des(1) command.
-
-=item B<-s>
-
-Does nothing - allowed for compatibility with sunOS des(1) command.
-
-=item B<-k> I<key>
-
-Use the encryption 
-I<key>
-specified.
-
-=item B<-h>
-
-The
-I<key>
-is assumed to be a 16 character hexadecimal number.
-If the
-B<-3>
-option is used the key is assumed to be a 32 character hexadecimal
-number.
-
-=item B<-u>
-
-This flag is used to read and write uuencoded files.  If decrypting,
-the input file is assumed to contain uuencoded, DES encrypted data.
-If encrypting, the characters following the B<-u> are used as the name of
-the uuencoded file to embed in the begin line of the uuencoded
-output.  If there is no name specified after the B<-u>, the name text.des
-will be embedded in the header.
-
-=head1 SEE ALSO
-
-ps(1),
-L<des_crypt(3)|des_crypt(3)>
-
-=head1 BUGS
-
-The problem with using the
-B<-e>
-option is the short key length.
-It would be better to use a real 56-bit key rather than an
-ASCII-based 56-bit pattern.  Knowing that the key was derived from ASCII
-radically reduces the time necessary for a brute-force cryptographic attack.
-My attempt to remove this problem is to add an alternative text-key to
-DES-key function.  This alternative function (accessed via
-B<-E>, B<-D>, B<-S>
-and
-B<-3>)
-uses DES to help generate the key.
-
-Be carefully when using the B<-u> option.  Doing B<des -ud> I<filename> will
-not decrypt filename (the B<-u> option will gobble the B<-d> option).
-
-The VMS operating system operates in a world where files are always a
-multiple of 512 bytes.  This causes problems when encrypted data is
-send from Unix to VMS since a 88 byte file will suddenly be padded
-with 424 null bytes.  To get around this problem, use the B<-u> option
-to uuencode the data before it is send to the VMS system.
-
-=head1 AUTHOR
-
-Eric Young (eay@cryptsoft.com)
-
-=cut
diff --git a/crypto/openssl/crypto/des/des3s.cpp b/crypto/openssl/crypto/des/des3s.cpp
deleted file mode 100644
index 02d527c057c2..000000000000
--- a/crypto/openssl/crypto/des/des3s.cpp
+++ /dev/null
@@ -1,67 +0,0 @@
-//
-// gettsc.inl
-//
-// gives access to the Pentium's (secret) cycle counter
-//
-// This software was written by Leonard Janke (janke@unixg.ubc.ca)
-// in 1996-7 and is entered, by him, into the public domain.
-
-#if defined(__WATCOMC__)
-void GetTSC(unsigned long&);
-#pragma aux GetTSC = 0x0f 0x31 "mov [edi], eax" parm [edi] modify [edx eax];
-#elif defined(__GNUC__)
-inline
-void GetTSC(unsigned long& tsc)
-{
-  asm volatile(".byte 15, 49\n\t"
-	       : "=eax" (tsc)
-	       :
-	       : "%edx", "%eax");
-}
-#elif defined(_MSC_VER)
-inline
-void GetTSC(unsigned long& tsc)
-{
-  unsigned long a;
-  __asm _emit 0fh
-  __asm _emit 31h
-  __asm mov a, eax;
-  tsc=a;
-}
-#endif      
-
-#include <stdio.h>
-#include <stdlib.h>
-#include <openssl/des.h>
-
-void main(int argc,char *argv[])
-	{
-	des_key_schedule key1,key2,key3;
-	unsigned long s1,s2,e1,e2;
-	unsigned long data[2];
-	int i,j;
-
-	for (j=0; j<6; j++)
-		{
-		for (i=0; i<1000; i++) /**/
-			{
-			des_encrypt3(&data[0],key1,key2,key3);
-			GetTSC(s1);
-			des_encrypt3(&data[0],key1,key2,key3);
-			des_encrypt3(&data[0],key1,key2,key3);
-			des_encrypt3(&data[0],key1,key2,key3);
-			GetTSC(e1);
-			GetTSC(s2);
-			des_encrypt3(&data[0],key1,key2,key3);
-			des_encrypt3(&data[0],key1,key2,key3);
-			des_encrypt3(&data[0],key1,key2,key3);
-			des_encrypt3(&data[0],key1,key2,key3);
-			GetTSC(e2);
-			des_encrypt3(&data[0],key1,key2,key3);
-			}
-
-		printf("des %d %d (%d)\n",
-			e1-s1,e2-s2,((e2-s2)-(e1-s1)));
-		}
-	}
-
diff --git a/crypto/openssl/crypto/des/des_enc.c b/crypto/openssl/crypto/des/des_enc.c
deleted file mode 100644
index 1c37ab96d3de..000000000000
--- a/crypto/openssl/crypto/des/des_enc.c
+++ /dev/null
@@ -1,407 +0,0 @@
-/* crypto/des/des_enc.c */
-/* Copyright (C) 1995-1998 Eric Young (eay@cryptsoft.com)
- * All rights reserved.
- *
- * This package is an SSL implementation written
- * by Eric Young (eay@cryptsoft.com).
- * The implementation was written so as to conform with Netscapes SSL.
- * 
- * This library is free for commercial and non-commercial use as long as
- * the following conditions are aheared to.  The following conditions
- * apply to all code found in this distribution, be it the RC4, RSA,
- * lhash, DES, etc., code; not just the SSL code.  The SSL documentation
- * included with this distribution is covered by the same copyright terms
- * except that the holder is Tim Hudson (tjh@cryptsoft.com).
- * 
- * Copyright remains Eric Young's, and as such any Copyright notices in
- * the code are not to be removed.
- * If this package is used in a product, Eric Young should be given attribution
- * as the author of the parts of the library used.
- * This can be in the form of a textual message at program startup or
- * in documentation (online or textual) provided with the package.
- * 
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions
- * are met:
- * 1. Redistributions of source code must retain the copyright
- *    notice, this list of conditions and the following disclaimer.
- * 2. Redistributions in binary form must reproduce the above copyright
- *    notice, this list of conditions and the following disclaimer in the
- *    documentation and/or other materials provided with the distribution.
- * 3. All advertising materials mentioning features or use of this software
- *    must display the following acknowledgement:
- *    "This product includes cryptographic software written by
- *     Eric Young (eay@cryptsoft.com)"
- *    The word 'cryptographic' can be left out if the rouines from the library
- *    being used are not cryptographic related :-).
- * 4. If you include any Windows specific code (or a derivative thereof) from 
- *    the apps directory (application code) you must include an acknowledgement:
- *    "This product includes software written by Tim Hudson (tjh@cryptsoft.com)"
- * 
- * THIS SOFTWARE IS PROVIDED BY ERIC YOUNG ``AS IS'' AND
- * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
- * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
- * ARE DISCLAIMED.  IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE
- * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
- * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
- * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
- * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
- * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
- * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
- * SUCH DAMAGE.
- * 
- * The licence and distribution terms for any publically available version or
- * derivative of this code cannot be changed.  i.e. this code cannot simply be
- * copied and put under another distribution licence
- * [including the GNU Public Licence.]
- */
-
-#include "des_locl.h"
-
-void DES_encrypt1(DES_LONG *data, DES_key_schedule *ks, int enc)
-	{
-	register DES_LONG l,r,t,u;
-#ifdef DES_PTR
-	register const unsigned char *des_SP=(const unsigned char *)DES_SPtrans;
-#endif
-#ifndef DES_UNROLL
-	register int i;
-#endif
-	register DES_LONG *s;
-
-	r=data[0];
-	l=data[1];
-
-	IP(r,l);
-	/* Things have been modified so that the initial rotate is
-	 * done outside the loop.  This required the
-	 * DES_SPtrans values in sp.h to be rotated 1 bit to the right.
-	 * One perl script later and things have a 5% speed up on a sparc2.
-	 * Thanks to Richard Outerbridge <71755.204@CompuServe.COM>
-	 * for pointing this out. */
-	/* clear the top bits on machines with 8byte longs */
-	/* shift left by 2 */
-	r=ROTATE(r,29)&0xffffffffL;
-	l=ROTATE(l,29)&0xffffffffL;
-
-	s=ks->ks->deslong;
-	/* I don't know if it is worth the effort of loop unrolling the
-	 * inner loop */
-	if (enc)
-		{
-#ifdef DES_UNROLL
-		D_ENCRYPT(l,r, 0); /*  1 */
-		D_ENCRYPT(r,l, 2); /*  2 */
-		D_ENCRYPT(l,r, 4); /*  3 */
-		D_ENCRYPT(r,l, 6); /*  4 */
-		D_ENCRYPT(l,r, 8); /*  5 */
-		D_ENCRYPT(r,l,10); /*  6 */
-		D_ENCRYPT(l,r,12); /*  7 */
-		D_ENCRYPT(r,l,14); /*  8 */
-		D_ENCRYPT(l,r,16); /*  9 */
-		D_ENCRYPT(r,l,18); /*  10 */
-		D_ENCRYPT(l,r,20); /*  11 */
-		D_ENCRYPT(r,l,22); /*  12 */
-		D_ENCRYPT(l,r,24); /*  13 */
-		D_ENCRYPT(r,l,26); /*  14 */
-		D_ENCRYPT(l,r,28); /*  15 */
-		D_ENCRYPT(r,l,30); /*  16 */
-#else
-		for (i=0; i<32; i+=8)
-			{
-			D_ENCRYPT(l,r,i+0); /*  1 */
-			D_ENCRYPT(r,l,i+2); /*  2 */
-			D_ENCRYPT(l,r,i+4); /*  3 */
-			D_ENCRYPT(r,l,i+6); /*  4 */
-			}
-#endif
-		}
-	else
-		{
-#ifdef DES_UNROLL
-		D_ENCRYPT(l,r,30); /* 16 */
-		D_ENCRYPT(r,l,28); /* 15 */
-		D_ENCRYPT(l,r,26); /* 14 */
-		D_ENCRYPT(r,l,24); /* 13 */
-		D_ENCRYPT(l,r,22); /* 12 */
-		D_ENCRYPT(r,l,20); /* 11 */
-		D_ENCRYPT(l,r,18); /* 10 */
-		D_ENCRYPT(r,l,16); /*  9 */
-		D_ENCRYPT(l,r,14); /*  8 */
-		D_ENCRYPT(r,l,12); /*  7 */
-		D_ENCRYPT(l,r,10); /*  6 */
-		D_ENCRYPT(r,l, 8); /*  5 */
-		D_ENCRYPT(l,r, 6); /*  4 */
-		D_ENCRYPT(r,l, 4); /*  3 */
-		D_ENCRYPT(l,r, 2); /*  2 */
-		D_ENCRYPT(r,l, 0); /*  1 */
-#else
-		for (i=30; i>0; i-=8)
-			{
-			D_ENCRYPT(l,r,i-0); /* 16 */
-			D_ENCRYPT(r,l,i-2); /* 15 */
-			D_ENCRYPT(l,r,i-4); /* 14 */
-			D_ENCRYPT(r,l,i-6); /* 13 */
-			}
-#endif
-		}
-
-	/* rotate and clear the top bits on machines with 8byte longs */
-	l=ROTATE(l,3)&0xffffffffL;
-	r=ROTATE(r,3)&0xffffffffL;
-
-	FP(r,l);
-	data[0]=l;
-	data[1]=r;
-	l=r=t=u=0;
-	}
-
-void DES_encrypt2(DES_LONG *data, DES_key_schedule *ks, int enc)
-	{
-	register DES_LONG l,r,t,u;
-#ifdef DES_PTR
-	register const unsigned char *des_SP=(const unsigned char *)DES_SPtrans;
-#endif
-#ifndef DES_UNROLL
-	register int i;
-#endif
-	register DES_LONG *s;
-
-	r=data[0];
-	l=data[1];
-
-	/* Things have been modified so that the initial rotate is
-	 * done outside the loop.  This required the
-	 * DES_SPtrans values in sp.h to be rotated 1 bit to the right.
-	 * One perl script later and things have a 5% speed up on a sparc2.
-	 * Thanks to Richard Outerbridge <71755.204@CompuServe.COM>
-	 * for pointing this out. */
-	/* clear the top bits on machines with 8byte longs */
-	r=ROTATE(r,29)&0xffffffffL;
-	l=ROTATE(l,29)&0xffffffffL;
-
-	s=ks->ks->deslong;
-	/* I don't know if it is worth the effort of loop unrolling the
-	 * inner loop */
-	if (enc)
-		{
-#ifdef DES_UNROLL
-		D_ENCRYPT(l,r, 0); /*  1 */
-		D_ENCRYPT(r,l, 2); /*  2 */
-		D_ENCRYPT(l,r, 4); /*  3 */
-		D_ENCRYPT(r,l, 6); /*  4 */
-		D_ENCRYPT(l,r, 8); /*  5 */
-		D_ENCRYPT(r,l,10); /*  6 */
-		D_ENCRYPT(l,r,12); /*  7 */
-		D_ENCRYPT(r,l,14); /*  8 */
-		D_ENCRYPT(l,r,16); /*  9 */
-		D_ENCRYPT(r,l,18); /*  10 */
-		D_ENCRYPT(l,r,20); /*  11 */
-		D_ENCRYPT(r,l,22); /*  12 */
-		D_ENCRYPT(l,r,24); /*  13 */
-		D_ENCRYPT(r,l,26); /*  14 */
-		D_ENCRYPT(l,r,28); /*  15 */
-		D_ENCRYPT(r,l,30); /*  16 */
-#else
-		for (i=0; i<32; i+=8)
-			{
-			D_ENCRYPT(l,r,i+0); /*  1 */
-			D_ENCRYPT(r,l,i+2); /*  2 */
-			D_ENCRYPT(l,r,i+4); /*  3 */
-			D_ENCRYPT(r,l,i+6); /*  4 */
-			}
-#endif
-		}
-	else
-		{
-#ifdef DES_UNROLL
-		D_ENCRYPT(l,r,30); /* 16 */
-		D_ENCRYPT(r,l,28); /* 15 */
-		D_ENCRYPT(l,r,26); /* 14 */
-		D_ENCRYPT(r,l,24); /* 13 */
-		D_ENCRYPT(l,r,22); /* 12 */
-		D_ENCRYPT(r,l,20); /* 11 */
-		D_ENCRYPT(l,r,18); /* 10 */
-		D_ENCRYPT(r,l,16); /*  9 */
-		D_ENCRYPT(l,r,14); /*  8 */
-		D_ENCRYPT(r,l,12); /*  7 */
-		D_ENCRYPT(l,r,10); /*  6 */
-		D_ENCRYPT(r,l, 8); /*  5 */
-		D_ENCRYPT(l,r, 6); /*  4 */
-		D_ENCRYPT(r,l, 4); /*  3 */
-		D_ENCRYPT(l,r, 2); /*  2 */
-		D_ENCRYPT(r,l, 0); /*  1 */
-#else
-		for (i=30; i>0; i-=8)
-			{
-			D_ENCRYPT(l,r,i-0); /* 16 */
-			D_ENCRYPT(r,l,i-2); /* 15 */
-			D_ENCRYPT(l,r,i-4); /* 14 */
-			D_ENCRYPT(r,l,i-6); /* 13 */
-			}
-#endif
-		}
-	/* rotate and clear the top bits on machines with 8byte longs */
-	data[0]=ROTATE(l,3)&0xffffffffL;
-	data[1]=ROTATE(r,3)&0xffffffffL;
-	l=r=t=u=0;
-	}
-
-void DES_encrypt3(DES_LONG *data, DES_key_schedule *ks1,
-		  DES_key_schedule *ks2, DES_key_schedule *ks3)
-	{
-	register DES_LONG l,r;
-
-	l=data[0];
-	r=data[1];
-	IP(l,r);
-	data[0]=l;
-	data[1]=r;
-	DES_encrypt2((DES_LONG *)data,ks1,DES_ENCRYPT);
-	DES_encrypt2((DES_LONG *)data,ks2,DES_DECRYPT);
-	DES_encrypt2((DES_LONG *)data,ks3,DES_ENCRYPT);
-	l=data[0];
-	r=data[1];
-	FP(r,l);
-	data[0]=l;
-	data[1]=r;
-	}
-
-void DES_decrypt3(DES_LONG *data, DES_key_schedule *ks1,
-		  DES_key_schedule *ks2, DES_key_schedule *ks3)
-	{
-	register DES_LONG l,r;
-
-	l=data[0];
-	r=data[1];
-	IP(l,r);
-	data[0]=l;
-	data[1]=r;
-	DES_encrypt2((DES_LONG *)data,ks3,DES_DECRYPT);
-	DES_encrypt2((DES_LONG *)data,ks2,DES_ENCRYPT);
-	DES_encrypt2((DES_LONG *)data,ks1,DES_DECRYPT);
-	l=data[0];
-	r=data[1];
-	FP(r,l);
-	data[0]=l;
-	data[1]=r;
-	}
-
-#ifndef DES_DEFAULT_OPTIONS
-
-#undef CBC_ENC_C__DONT_UPDATE_IV
-#include "ncbc_enc.c" /* DES_ncbc_encrypt */
-
-void DES_ede3_cbc_encrypt(const unsigned char *input, unsigned char *output,
-			  long length, DES_key_schedule *ks1,
-			  DES_key_schedule *ks2, DES_key_schedule *ks3,
-			  DES_cblock *ivec, int enc)
-	{
-	register DES_LONG tin0,tin1;
-	register DES_LONG tout0,tout1,xor0,xor1;
-	register const unsigned char *in;
-	unsigned char *out;
-	register long l=length;
-	DES_LONG tin[2];
-	unsigned char *iv;
-
-	in=input;
-	out=output;
-	iv = &(*ivec)[0];
-
-	if (enc)
-		{
-		c2l(iv,tout0);
-		c2l(iv,tout1);
-		for (l-=8; l>=0; l-=8)
-			{
-			c2l(in,tin0);
-			c2l(in,tin1);
-			tin0^=tout0;
-			tin1^=tout1;
-
-			tin[0]=tin0;
-			tin[1]=tin1;
-			DES_encrypt3((DES_LONG *)tin,ks1,ks2,ks3);
-			tout0=tin[0];
-			tout1=tin[1];
-
-			l2c(tout0,out);
-			l2c(tout1,out);
-			}
-		if (l != -8)
-			{
-			c2ln(in,tin0,tin1,l+8);
-			tin0^=tout0;
-			tin1^=tout1;
-
-			tin[0]=tin0;
-			tin[1]=tin1;
-			DES_encrypt3((DES_LONG *)tin,ks1,ks2,ks3);
-			tout0=tin[0];
-			tout1=tin[1];
-
-			l2c(tout0,out);
-			l2c(tout1,out);
-			}
-		iv = &(*ivec)[0];
-		l2c(tout0,iv);
-		l2c(tout1,iv);
-		}
-	else
-		{
-		register DES_LONG t0,t1;
-
-		c2l(iv,xor0);
-		c2l(iv,xor1);
-		for (l-=8; l>=0; l-=8)
-			{
-			c2l(in,tin0);
-			c2l(in,tin1);
-
-			t0=tin0;
-			t1=tin1;
-
-			tin[0]=tin0;
-			tin[1]=tin1;
-			DES_decrypt3((DES_LONG *)tin,ks1,ks2,ks3);
-			tout0=tin[0];
-			tout1=tin[1];
-
-			tout0^=xor0;
-			tout1^=xor1;
-			l2c(tout0,out);
-			l2c(tout1,out);
-			xor0=t0;
-			xor1=t1;
-			}
-		if (l != -8)
-			{
-			c2l(in,tin0);
-			c2l(in,tin1);
-			
-			t0=tin0;
-			t1=tin1;
-
-			tin[0]=tin0;
-			tin[1]=tin1;
-			DES_decrypt3((DES_LONG *)tin,ks1,ks2,ks3);
-			tout0=tin[0];
-			tout1=tin[1];
-		
-			tout0^=xor0;
-			tout1^=xor1;
-			l2cn(tout0,tout1,out,l+8);
-			xor0=t0;
-			xor1=t1;
-			}
-
-		iv = &(*ivec)[0];
-		l2c(xor0,iv);
-		l2c(xor1,iv);
-		}
-	tin0=tin1=tout0=tout1=xor0=xor1=0;
-	tin[0]=tin[1]=0;
-	}
-
-#endif /* DES_DEFAULT_OPTIONS */
diff --git a/crypto/openssl/crypto/des/des_locl.h b/crypto/openssl/crypto/des/des_locl.h
deleted file mode 100644
index 4b9ecff23391..000000000000
--- a/crypto/openssl/crypto/des/des_locl.h
+++ /dev/null
@@ -1,428 +0,0 @@
-/* crypto/des/des_locl.h */
-/* Copyright (C) 1995-1997 Eric Young (eay@cryptsoft.com)
- * All rights reserved.
- *
- * This package is an SSL implementation written
- * by Eric Young (eay@cryptsoft.com).
- * The implementation was written so as to conform with Netscapes SSL.
- * 
- * This library is free for commercial and non-commercial use as long as
- * the following conditions are aheared to.  The following conditions
- * apply to all code found in this distribution, be it the RC4, RSA,
- * lhash, DES, etc., code; not just the SSL code.  The SSL documentation
- * included with this distribution is covered by the same copyright terms
- * except that the holder is Tim Hudson (tjh@cryptsoft.com).
- * 
- * Copyright remains Eric Young's, and as such any Copyright notices in
- * the code are not to be removed.
- * If this package is used in a product, Eric Young should be given attribution
- * as the author of the parts of the library used.
- * This can be in the form of a textual message at program startup or
- * in documentation (online or textual) provided with the package.
- * 
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions
- * are met:
- * 1. Redistributions of source code must retain the copyright
- *    notice, this list of conditions and the following disclaimer.
- * 2. Redistributions in binary form must reproduce the above copyright
- *    notice, this list of conditions and the following disclaimer in the
- *    documentation and/or other materials provided with the distribution.
- * 3. All advertising materials mentioning features or use of this software
- *    must display the following acknowledgement:
- *    "This product includes cryptographic software written by
- *     Eric Young (eay@cryptsoft.com)"
- *    The word 'cryptographic' can be left out if the rouines from the library
- *    being used are not cryptographic related :-).
- * 4. If you include any Windows specific code (or a derivative thereof) from 
- *    the apps directory (application code) you must include an acknowledgement:
- *    "This product includes software written by Tim Hudson (tjh@cryptsoft.com)"
- * 
- * THIS SOFTWARE IS PROVIDED BY ERIC YOUNG ``AS IS'' AND
- * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
- * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
- * ARE DISCLAIMED.  IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE
- * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
- * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
- * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
- * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
- * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
- * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
- * SUCH DAMAGE.
- * 
- * The licence and distribution terms for any publically available version or
- * derivative of this code cannot be changed.  i.e. this code cannot simply be
- * copied and put under another distribution licence
- * [including the GNU Public Licence.]
- */
-
-#ifndef HEADER_DES_LOCL_H
-#define HEADER_DES_LOCL_H
-
-#include <openssl/e_os2.h>
-
-#if defined(OPENSSL_SYS_WIN32) || defined(OPENSSL_SYS_WIN16)
-#ifndef OPENSSL_SYS_MSDOS
-#define OPENSSL_SYS_MSDOS
-#endif
-#endif
-
-#include <stdio.h>
-#include <stdlib.h>
-
-#ifndef OPENSSL_SYS_MSDOS
-#if !defined(OPENSSL_SYS_VMS) || defined(__DECC)
-#ifdef OPENSSL_UNISTD
-# include OPENSSL_UNISTD
-#else
-# include <unistd.h>
-#endif
-#include <math.h>
-#endif
-#endif
-#include <openssl/des.h>
-
-#ifdef OPENSSL_SYS_MSDOS		/* Visual C++ 2.1 (Windows NT/95) */
-#include <stdlib.h>
-#include <errno.h>
-#include <time.h>
-#include <io.h>
-#endif
-
-#if defined(__STDC__) || defined(OPENSSL_SYS_VMS) || defined(M_XENIX) || defined(OPENSSL_SYS_MSDOS)
-#include <string.h>
-#endif
-
-#ifdef OPENSSL_BUILD_SHLIBCRYPTO
-# undef OPENSSL_EXTERN
-# define OPENSSL_EXTERN OPENSSL_EXPORT
-#endif
-
-#define ITERATIONS 16
-#define HALF_ITERATIONS 8
-
-/* used in des_read and des_write */
-#define MAXWRITE	(1024*16)
-#define BSIZE		(MAXWRITE+4)
-
-#define c2l(c,l)	(l =((DES_LONG)(*((c)++)))    , \
-			 l|=((DES_LONG)(*((c)++)))<< 8L, \
-			 l|=((DES_LONG)(*((c)++)))<<16L, \
-			 l|=((DES_LONG)(*((c)++)))<<24L)
-
-/* NOTE - c is not incremented as per c2l */
-#define c2ln(c,l1,l2,n)	{ \
-			c+=n; \
-			l1=l2=0; \
-			switch (n) { \
-			case 8: l2 =((DES_LONG)(*(--(c))))<<24L; \
-			case 7: l2|=((DES_LONG)(*(--(c))))<<16L; \
-			case 6: l2|=((DES_LONG)(*(--(c))))<< 8L; \
-			case 5: l2|=((DES_LONG)(*(--(c))));     \
-			case 4: l1 =((DES_LONG)(*(--(c))))<<24L; \
-			case 3: l1|=((DES_LONG)(*(--(c))))<<16L; \
-			case 2: l1|=((DES_LONG)(*(--(c))))<< 8L; \
-			case 1: l1|=((DES_LONG)(*(--(c))));     \
-				} \
-			}
-
-#define l2c(l,c)	(*((c)++)=(unsigned char)(((l)     )&0xff), \
-			 *((c)++)=(unsigned char)(((l)>> 8L)&0xff), \
-			 *((c)++)=(unsigned char)(((l)>>16L)&0xff), \
-			 *((c)++)=(unsigned char)(((l)>>24L)&0xff))
-
-/* replacements for htonl and ntohl since I have no idea what to do
- * when faced with machines with 8 byte longs. */
-#define HDRSIZE 4
-
-#define n2l(c,l)	(l =((DES_LONG)(*((c)++)))<<24L, \
-			 l|=((DES_LONG)(*((c)++)))<<16L, \
-			 l|=((DES_LONG)(*((c)++)))<< 8L, \
-			 l|=((DES_LONG)(*((c)++))))
-
-#define l2n(l,c)	(*((c)++)=(unsigned char)(((l)>>24L)&0xff), \
-			 *((c)++)=(unsigned char)(((l)>>16L)&0xff), \
-			 *((c)++)=(unsigned char)(((l)>> 8L)&0xff), \
-			 *((c)++)=(unsigned char)(((l)     )&0xff))
-
-/* NOTE - c is not incremented as per l2c */
-#define l2cn(l1,l2,c,n)	{ \
-			c+=n; \
-			switch (n) { \
-			case 8: *(--(c))=(unsigned char)(((l2)>>24L)&0xff); \
-			case 7: *(--(c))=(unsigned char)(((l2)>>16L)&0xff); \
-			case 6: *(--(c))=(unsigned char)(((l2)>> 8L)&0xff); \
-			case 5: *(--(c))=(unsigned char)(((l2)     )&0xff); \
-			case 4: *(--(c))=(unsigned char)(((l1)>>24L)&0xff); \
-			case 3: *(--(c))=(unsigned char)(((l1)>>16L)&0xff); \
-			case 2: *(--(c))=(unsigned char)(((l1)>> 8L)&0xff); \
-			case 1: *(--(c))=(unsigned char)(((l1)     )&0xff); \
-				} \
-			}
-
-#if (defined(OPENSSL_SYS_WIN32) && defined(_MSC_VER)) || defined(__ICC)
-#define	ROTATE(a,n)	(_lrotr(a,n))
-#elif defined(__GNUC__) && __GNUC__>=2 && !defined(__STRICT_ANSI__) && !defined(OPENSSL_NO_ASM) && !defined(OPENSSL_NO_INLINE_ASM) && !defined(PEDANTIC)
-# if defined(__i386) || defined(__i386__) || defined(__x86_64) || defined(__x86_64__)
-#  define ROTATE(a,n)	({ register unsigned int ret;	\
-				asm ("rorl %1,%0"	\
-					: "=r"(ret)	\
-					: "I"(n),"0"(a)	\
-					: "cc");	\
-			   ret;				\
-			})
-# endif
-#endif
-#ifndef ROTATE
-#define	ROTATE(a,n)	(((a)>>(n))+((a)<<(32-(n))))
-#endif
-
-/* Don't worry about the LOAD_DATA() stuff, that is used by
- * fcrypt() to add it's little bit to the front */
-
-#ifdef DES_FCRYPT
-
-#define LOAD_DATA_tmp(R,S,u,t,E0,E1) \
-	{ DES_LONG tmp; LOAD_DATA(R,S,u,t,E0,E1,tmp); }
-
-#define LOAD_DATA(R,S,u,t,E0,E1,tmp) \
-	t=R^(R>>16L); \
-	u=t&E0; t&=E1; \
-	tmp=(u<<16); u^=R^s[S  ]; u^=tmp; \
-	tmp=(t<<16); t^=R^s[S+1]; t^=tmp
-#else
-#define LOAD_DATA_tmp(a,b,c,d,e,f) LOAD_DATA(a,b,c,d,e,f,g)
-#define LOAD_DATA(R,S,u,t,E0,E1,tmp) \
-	u=R^s[S  ]; \
-	t=R^s[S+1]
-#endif
-
-/* The changes to this macro may help or hinder, depending on the
- * compiler and the architecture.  gcc2 always seems to do well :-).
- * Inspired by Dana How <how@isl.stanford.edu>
- * DO NOT use the alternative version on machines with 8 byte longs.
- * It does not seem to work on the Alpha, even when DES_LONG is 4
- * bytes, probably an issue of accessing non-word aligned objects :-( */
-#ifdef DES_PTR
-
-/* It recently occurred to me that 0^0^0^0^0^0^0 == 0, so there
- * is no reason to not xor all the sub items together.  This potentially
- * saves a register since things can be xored directly into L */
-
-#if defined(DES_RISC1) || defined(DES_RISC2)
-#ifdef DES_RISC1
-#define D_ENCRYPT(LL,R,S) { \
-	unsigned int u1,u2,u3; \
-	LOAD_DATA(R,S,u,t,E0,E1,u1); \
-	u2=(int)u>>8L; \
-	u1=(int)u&0xfc; \
-	u2&=0xfc; \
-	t=ROTATE(t,4); \
-	u>>=16L; \
-	LL^= *(const DES_LONG *)(des_SP      +u1); \
-	LL^= *(const DES_LONG *)(des_SP+0x200+u2); \
-	u3=(int)(u>>8L); \
-	u1=(int)u&0xfc; \
-	u3&=0xfc; \
-	LL^= *(const DES_LONG *)(des_SP+0x400+u1); \
-	LL^= *(const DES_LONG *)(des_SP+0x600+u3); \
-	u2=(int)t>>8L; \
-	u1=(int)t&0xfc; \
-	u2&=0xfc; \
-	t>>=16L; \
-	LL^= *(const DES_LONG *)(des_SP+0x100+u1); \
-	LL^= *(const DES_LONG *)(des_SP+0x300+u2); \
-	u3=(int)t>>8L; \
-	u1=(int)t&0xfc; \
-	u3&=0xfc; \
-	LL^= *(const DES_LONG *)(des_SP+0x500+u1); \
-	LL^= *(const DES_LONG *)(des_SP+0x700+u3); }
-#endif
-#ifdef DES_RISC2
-#define D_ENCRYPT(LL,R,S) { \
-	unsigned int u1,u2,s1,s2; \
-	LOAD_DATA(R,S,u,t,E0,E1,u1); \
-	u2=(int)u>>8L; \
-	u1=(int)u&0xfc; \
-	u2&=0xfc; \
-	t=ROTATE(t,4); \
-	LL^= *(const DES_LONG *)(des_SP      +u1); \
-	LL^= *(const DES_LONG *)(des_SP+0x200+u2); \
-	s1=(int)(u>>16L); \
-	s2=(int)(u>>24L); \
-	s1&=0xfc; \
-	s2&=0xfc; \
-	LL^= *(const DES_LONG *)(des_SP+0x400+s1); \
-	LL^= *(const DES_LONG *)(des_SP+0x600+s2); \
-	u2=(int)t>>8L; \
-	u1=(int)t&0xfc; \
-	u2&=0xfc; \
-	LL^= *(const DES_LONG *)(des_SP+0x100+u1); \
-	LL^= *(const DES_LONG *)(des_SP+0x300+u2); \
-	s1=(int)(t>>16L); \
-	s2=(int)(t>>24L); \
-	s1&=0xfc; \
-	s2&=0xfc; \
-	LL^= *(const DES_LONG *)(des_SP+0x500+s1); \
-	LL^= *(const DES_LONG *)(des_SP+0x700+s2); }
-#endif
-#else
-#define D_ENCRYPT(LL,R,S) { \
-	LOAD_DATA_tmp(R,S,u,t,E0,E1); \
-	t=ROTATE(t,4); \
-	LL^= \
-	*(const DES_LONG *)(des_SP      +((u     )&0xfc))^ \
-	*(const DES_LONG *)(des_SP+0x200+((u>> 8L)&0xfc))^ \
-	*(const DES_LONG *)(des_SP+0x400+((u>>16L)&0xfc))^ \
-	*(const DES_LONG *)(des_SP+0x600+((u>>24L)&0xfc))^ \
-	*(const DES_LONG *)(des_SP+0x100+((t     )&0xfc))^ \
-	*(const DES_LONG *)(des_SP+0x300+((t>> 8L)&0xfc))^ \
-	*(const DES_LONG *)(des_SP+0x500+((t>>16L)&0xfc))^ \
-	*(const DES_LONG *)(des_SP+0x700+((t>>24L)&0xfc)); }
-#endif
-
-#else /* original version */
-
-#if defined(DES_RISC1) || defined(DES_RISC2)
-#ifdef DES_RISC1
-#define D_ENCRYPT(LL,R,S) {\
-	unsigned int u1,u2,u3; \
-	LOAD_DATA(R,S,u,t,E0,E1,u1); \
-	u>>=2L; \
-	t=ROTATE(t,6); \
-	u2=(int)u>>8L; \
-	u1=(int)u&0x3f; \
-	u2&=0x3f; \
-	u>>=16L; \
-	LL^=DES_SPtrans[0][u1]; \
-	LL^=DES_SPtrans[2][u2]; \
-	u3=(int)u>>8L; \
-	u1=(int)u&0x3f; \
-	u3&=0x3f; \
-	LL^=DES_SPtrans[4][u1]; \
-	LL^=DES_SPtrans[6][u3]; \
-	u2=(int)t>>8L; \
-	u1=(int)t&0x3f; \
-	u2&=0x3f; \
-	t>>=16L; \
-	LL^=DES_SPtrans[1][u1]; \
-	LL^=DES_SPtrans[3][u2]; \
-	u3=(int)t>>8L; \
-	u1=(int)t&0x3f; \
-	u3&=0x3f; \
-	LL^=DES_SPtrans[5][u1]; \
-	LL^=DES_SPtrans[7][u3]; }
-#endif
-#ifdef DES_RISC2
-#define D_ENCRYPT(LL,R,S) {\
-	unsigned int u1,u2,s1,s2; \
-	LOAD_DATA(R,S,u,t,E0,E1,u1); \
-	u>>=2L; \
-	t=ROTATE(t,6); \
-	u2=(int)u>>8L; \
-	u1=(int)u&0x3f; \
-	u2&=0x3f; \
-	LL^=DES_SPtrans[0][u1]; \
-	LL^=DES_SPtrans[2][u2]; \
-	s1=(int)u>>16L; \
-	s2=(int)u>>24L; \
-	s1&=0x3f; \
-	s2&=0x3f; \
-	LL^=DES_SPtrans[4][s1]; \
-	LL^=DES_SPtrans[6][s2]; \
-	u2=(int)t>>8L; \
-	u1=(int)t&0x3f; \
-	u2&=0x3f; \
-	LL^=DES_SPtrans[1][u1]; \
-	LL^=DES_SPtrans[3][u2]; \
-	s1=(int)t>>16; \
-	s2=(int)t>>24L; \
-	s1&=0x3f; \
-	s2&=0x3f; \
-	LL^=DES_SPtrans[5][s1]; \
-	LL^=DES_SPtrans[7][s2]; }
-#endif
-
-#else
-
-#define D_ENCRYPT(LL,R,S) {\
-	LOAD_DATA_tmp(R,S,u,t,E0,E1); \
-	t=ROTATE(t,4); \
-	LL^=\
-		DES_SPtrans[0][(u>> 2L)&0x3f]^ \
-		DES_SPtrans[2][(u>>10L)&0x3f]^ \
-		DES_SPtrans[4][(u>>18L)&0x3f]^ \
-		DES_SPtrans[6][(u>>26L)&0x3f]^ \
-		DES_SPtrans[1][(t>> 2L)&0x3f]^ \
-		DES_SPtrans[3][(t>>10L)&0x3f]^ \
-		DES_SPtrans[5][(t>>18L)&0x3f]^ \
-		DES_SPtrans[7][(t>>26L)&0x3f]; }
-#endif
-#endif
-
-	/* IP and FP
-	 * The problem is more of a geometric problem that random bit fiddling.
-	 0  1  2  3  4  5  6  7      62 54 46 38 30 22 14  6
-	 8  9 10 11 12 13 14 15      60 52 44 36 28 20 12  4
-	16 17 18 19 20 21 22 23      58 50 42 34 26 18 10  2
-	24 25 26 27 28 29 30 31  to  56 48 40 32 24 16  8  0
-
-	32 33 34 35 36 37 38 39      63 55 47 39 31 23 15  7
-	40 41 42 43 44 45 46 47      61 53 45 37 29 21 13  5
-	48 49 50 51 52 53 54 55      59 51 43 35 27 19 11  3
-	56 57 58 59 60 61 62 63      57 49 41 33 25 17  9  1
-
-	The output has been subject to swaps of the form
-	0 1 -> 3 1 but the odd and even bits have been put into
-	2 3    2 0
-	different words.  The main trick is to remember that
-	t=((l>>size)^r)&(mask);
-	r^=t;
-	l^=(t<<size);
-	can be used to swap and move bits between words.
-
-	So l =  0  1  2  3  r = 16 17 18 19
-	        4  5  6  7      20 21 22 23
-	        8  9 10 11      24 25 26 27
-	       12 13 14 15      28 29 30 31
-	becomes (for size == 2 and mask == 0x3333)
-	   t =   2^16  3^17 -- --   l =  0  1 16 17  r =  2  3 18 19
-		 6^20  7^21 -- --        4  5 20 21       6  7 22 23
-		10^24 11^25 -- --        8  9 24 25      10 11 24 25
-		14^28 15^29 -- --       12 13 28 29      14 15 28 29
-
-	Thanks for hints from Richard Outerbridge - he told me IP&FP
-	could be done in 15 xor, 10 shifts and 5 ands.
-	When I finally started to think of the problem in 2D
-	I first got ~42 operations without xors.  When I remembered
-	how to use xors :-) I got it to its final state.
-	*/
-#define PERM_OP(a,b,t,n,m) ((t)=((((a)>>(n))^(b))&(m)),\
-	(b)^=(t),\
-	(a)^=((t)<<(n)))
-
-#define IP(l,r) \
-	{ \
-	register DES_LONG tt; \
-	PERM_OP(r,l,tt, 4,0x0f0f0f0fL); \
-	PERM_OP(l,r,tt,16,0x0000ffffL); \
-	PERM_OP(r,l,tt, 2,0x33333333L); \
-	PERM_OP(l,r,tt, 8,0x00ff00ffL); \
-	PERM_OP(r,l,tt, 1,0x55555555L); \
-	}
-
-#define FP(l,r) \
-	{ \
-	register DES_LONG tt; \
-	PERM_OP(l,r,tt, 1,0x55555555L); \
-	PERM_OP(r,l,tt, 8,0x00ff00ffL); \
-	PERM_OP(l,r,tt, 2,0x33333333L); \
-	PERM_OP(r,l,tt,16,0x0000ffffL); \
-	PERM_OP(l,r,tt, 4,0x0f0f0f0fL); \
-	}
-
-extern const DES_LONG DES_SPtrans[8][64];
-
-void fcrypt_body(DES_LONG *out,DES_key_schedule *ks,
-		 DES_LONG Eswap0, DES_LONG Eswap1);
-#endif
diff --git a/crypto/openssl/crypto/des/des_old.c b/crypto/openssl/crypto/des/des_old.c
deleted file mode 100644
index 7e4cd7180d18..000000000000
--- a/crypto/openssl/crypto/des/des_old.c
+++ /dev/null
@@ -1,271 +0,0 @@
-/* crypto/des/des_old.c -*- mode:C; c-file-style: "eay" -*- */
-
-/* WARNING WARNING WARNING WARNING WARNING WARNING WARNING WARNING
- *
- * The function names in here are deprecated and are only present to
- * provide an interface compatible with libdes.  OpenSSL now provides
- * functions where "des_" has been replaced with "DES_" in the names,
- * to make it possible to make incompatible changes that are needed
- * for C type security and other stuff.
- *
- * Please consider starting to use the DES_ functions rather than the
- * des_ ones.  The des_ functions will dissapear completely before
- * OpenSSL 1.0!
- *
- * WARNING WARNING WARNING WARNING WARNING WARNING WARNING WARNING
- */
-
-/* Written by Richard Levitte (richard@levitte.org) for the OpenSSL
- * project 2001.
- */
-/* ====================================================================
- * Copyright (c) 1998-2001 The OpenSSL Project.  All rights reserved.
- *
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions
- * are met:
- *
- * 1. Redistributions of source code must retain the above copyright
- *    notice, this list of conditions and the following disclaimer. 
- *
- * 2. Redistributions in binary form must reproduce the above copyright
- *    notice, this list of conditions and the following disclaimer in
- *    the documentation and/or other materials provided with the
- *    distribution.
- *
- * 3. All advertising materials mentioning features or use of this
- *    software must display the following acknowledgment:
- *    "This product includes software developed by the OpenSSL Project
- *    for use in the OpenSSL Toolkit. (http://www.openssl.org/)"
- *
- * 4. The names "OpenSSL Toolkit" and "OpenSSL Project" must not be used to
- *    endorse or promote products derived from this software without
- *    prior written permission. For written permission, please contact
- *    openssl-core@openssl.org.
- *
- * 5. Products derived from this software may not be called "OpenSSL"
- *    nor may "OpenSSL" appear in their names without prior written
- *    permission of the OpenSSL Project.
- *
- * 6. Redistributions of any form whatsoever must retain the following
- *    acknowledgment:
- *    "This product includes software developed by the OpenSSL Project
- *    for use in the OpenSSL Toolkit (http://www.openssl.org/)"
- *
- * THIS SOFTWARE IS PROVIDED BY THE OpenSSL PROJECT ``AS IS'' AND ANY
- * EXPRESSED OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
- * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR
- * PURPOSE ARE DISCLAIMED.  IN NO EVENT SHALL THE OpenSSL PROJECT OR
- * ITS CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
- * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
- * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
- * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
- * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
- * STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
- * ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED
- * OF THE POSSIBILITY OF SUCH DAMAGE.
- * ====================================================================
- *
- * This product includes cryptographic software written by Eric Young
- * (eay@cryptsoft.com).  This product includes software written by Tim
- * Hudson (tjh@cryptsoft.com).
- *
- */
-
-#define OPENSSL_DES_LIBDES_COMPATIBILITY
-#include <openssl/des.h>
-#include <openssl/rand.h>
-
-const char *_ossl_old_des_options(void)
-	{
-	return DES_options();
-	}
-void _ossl_old_des_ecb3_encrypt(_ossl_old_des_cblock *input,_ossl_old_des_cblock *output,
-	des_key_schedule ks1,des_key_schedule ks2,
-	des_key_schedule ks3, int enc)
-	{
-	DES_ecb3_encrypt((const_DES_cblock *)input, output,
-		(DES_key_schedule *)ks1, (DES_key_schedule *)ks2,
-		(DES_key_schedule *)ks3, enc);
-	}
-DES_LONG _ossl_old_des_cbc_cksum(_ossl_old_des_cblock *input,_ossl_old_des_cblock *output,
-	long length,des_key_schedule schedule,_ossl_old_des_cblock *ivec)
-	{
-	return DES_cbc_cksum((unsigned char *)input, output, length,
-		(DES_key_schedule *)schedule, ivec);
-	}
-void _ossl_old_des_cbc_encrypt(_ossl_old_des_cblock *input,_ossl_old_des_cblock *output,long length,
-	des_key_schedule schedule,_ossl_old_des_cblock *ivec,int enc)
-	{
-	DES_cbc_encrypt((unsigned char *)input, (unsigned char *)output,
-		length, (DES_key_schedule *)schedule, ivec, enc);
-	}
-void _ossl_old_des_ncbc_encrypt(_ossl_old_des_cblock *input,_ossl_old_des_cblock *output,long length,
-	des_key_schedule schedule,_ossl_old_des_cblock *ivec,int enc)
-	{
-	DES_ncbc_encrypt((unsigned char *)input, (unsigned char *)output,
-		length, (DES_key_schedule *)schedule, ivec, enc);
-	}
-void _ossl_old_des_xcbc_encrypt(_ossl_old_des_cblock *input,_ossl_old_des_cblock *output,long length,
-	des_key_schedule schedule,_ossl_old_des_cblock *ivec,
-	_ossl_old_des_cblock *inw,_ossl_old_des_cblock *outw,int enc)
-	{
-	DES_xcbc_encrypt((unsigned char *)input, (unsigned char *)output,
-		length, (DES_key_schedule *)schedule, ivec, inw, outw, enc);
-	}
-void _ossl_old_des_cfb_encrypt(unsigned char *in,unsigned char *out,int numbits,
-	long length,des_key_schedule schedule,_ossl_old_des_cblock *ivec,int enc)
-	{
-	DES_cfb_encrypt(in, out, numbits, length,
-		(DES_key_schedule *)schedule, ivec, enc);
-	}
-void _ossl_old_des_ecb_encrypt(_ossl_old_des_cblock *input,_ossl_old_des_cblock *output,
-	des_key_schedule ks,int enc)
-	{
-	DES_ecb_encrypt(input, output, (DES_key_schedule *)ks, enc);
-	}
-void _ossl_old_des_encrypt(DES_LONG *data,des_key_schedule ks, int enc)
-	{
-	DES_encrypt1(data, (DES_key_schedule *)ks, enc);
-	}
-void _ossl_old_des_encrypt2(DES_LONG *data,des_key_schedule ks, int enc)
-	{
-	DES_encrypt2(data, (DES_key_schedule *)ks, enc);
-	}
-void _ossl_old_des_encrypt3(DES_LONG *data, des_key_schedule ks1,
-	des_key_schedule ks2, des_key_schedule ks3)
-	{
-	DES_encrypt3(data, (DES_key_schedule *)ks1, (DES_key_schedule *)ks2,
-		(DES_key_schedule *)ks3);
-	}
-void _ossl_old_des_decrypt3(DES_LONG *data, des_key_schedule ks1,
-	des_key_schedule ks2, des_key_schedule ks3)
-	{
-	DES_decrypt3(data, (DES_key_schedule *)ks1, (DES_key_schedule *)ks2,
-		(DES_key_schedule *)ks3);
-	}
-void _ossl_old_des_ede3_cbc_encrypt(_ossl_old_des_cblock *input, _ossl_old_des_cblock *output, 
-	long length, des_key_schedule ks1, des_key_schedule ks2, 
-	des_key_schedule ks3, _ossl_old_des_cblock *ivec, int enc)
-	{
-	DES_ede3_cbc_encrypt((unsigned char *)input, (unsigned char *)output,
-		length, (DES_key_schedule *)ks1, (DES_key_schedule *)ks2,
-		(DES_key_schedule *)ks3, ivec, enc);
-	}
-void _ossl_old_des_ede3_cfb64_encrypt(unsigned char *in, unsigned char *out,
-	long length, des_key_schedule ks1, des_key_schedule ks2,
-	des_key_schedule ks3, _ossl_old_des_cblock *ivec, int *num, int enc)
-	{
-	DES_ede3_cfb64_encrypt(in, out, length,
-		(DES_key_schedule *)ks1, (DES_key_schedule *)ks2,
-		(DES_key_schedule *)ks3, ivec, num, enc);
-	}
-void _ossl_old_des_ede3_ofb64_encrypt(unsigned char *in, unsigned char *out,
-	long length, des_key_schedule ks1, des_key_schedule ks2,
-	des_key_schedule ks3, _ossl_old_des_cblock *ivec, int *num)
-	{
-	DES_ede3_ofb64_encrypt(in, out, length,
-		(DES_key_schedule *)ks1, (DES_key_schedule *)ks2,
-		(DES_key_schedule *)ks3, ivec, num);
-	}
-
-void _ossl_old_des_xwhite_in2out(_ossl_old_des_cblock (*des_key), _ossl_old_des_cblock (*in_white),
-	_ossl_old_des_cblock (*out_white))
-	{
-	DES_xwhite_in2out(des_key, in_white, out_white);
-	}
-
-int _ossl_old_des_enc_read(int fd,char *buf,int len,des_key_schedule sched,
-	_ossl_old_des_cblock *iv)
-	{
-	return DES_enc_read(fd, buf, len, (DES_key_schedule *)sched, iv);
-	}
-int _ossl_old_des_enc_write(int fd,char *buf,int len,des_key_schedule sched,
-	_ossl_old_des_cblock *iv)
-	{
-	return DES_enc_write(fd, buf, len, (DES_key_schedule *)sched, iv);
-	}
-char *_ossl_old_des_fcrypt(const char *buf,const char *salt, char *ret)
-	{
-	return DES_fcrypt(buf, salt, ret);
-	}
-char *_ossl_old_des_crypt(const char *buf,const char *salt)
-	{
-	return DES_crypt(buf, salt);
-	}
-char *_ossl_old_crypt(const char *buf,const char *salt)
-	{
-	return DES_crypt(buf, salt);
-	}
-void _ossl_old_des_ofb_encrypt(unsigned char *in,unsigned char *out,
-	int numbits,long length,des_key_schedule schedule,_ossl_old_des_cblock *ivec)
-	{
-	DES_ofb_encrypt(in, out, numbits, length, (DES_key_schedule *)schedule,
-		ivec);
-	}
-void _ossl_old_des_pcbc_encrypt(_ossl_old_des_cblock *input,_ossl_old_des_cblock *output,long length,
-	des_key_schedule schedule,_ossl_old_des_cblock *ivec,int enc)
-	{
-	DES_pcbc_encrypt((unsigned char *)input, (unsigned char *)output,
-		length, (DES_key_schedule *)schedule, ivec, enc);
-	}
-DES_LONG _ossl_old_des_quad_cksum(_ossl_old_des_cblock *input,_ossl_old_des_cblock *output,
-	long length,int out_count,_ossl_old_des_cblock *seed)
-	{
-	return DES_quad_cksum((unsigned char *)input, output, length,
-		out_count, seed);
-	}
-void _ossl_old_des_random_seed(_ossl_old_des_cblock key)
-	{
-	RAND_seed(key, sizeof(_ossl_old_des_cblock));
-	}
-void _ossl_old_des_random_key(_ossl_old_des_cblock ret)
-	{
-	DES_random_key((DES_cblock *)ret);
-	}
-int _ossl_old_des_read_password(_ossl_old_des_cblock *key, const char *prompt,
-				int verify)
-	{
-	return DES_read_password(key, prompt, verify);
-	}
-int _ossl_old_des_read_2passwords(_ossl_old_des_cblock *key1, _ossl_old_des_cblock *key2,
-	const char *prompt, int verify)
-	{
-	return DES_read_2passwords(key1, key2, prompt, verify);
-	}
-void _ossl_old_des_set_odd_parity(_ossl_old_des_cblock *key)
-	{
-	DES_set_odd_parity(key);
-	}
-int _ossl_old_des_is_weak_key(_ossl_old_des_cblock *key)
-	{
-	return DES_is_weak_key(key);
-	}
-int _ossl_old_des_set_key(_ossl_old_des_cblock *key,des_key_schedule schedule)
-	{
-	return DES_set_key(key, (DES_key_schedule *)schedule);
-	}
-int _ossl_old_des_key_sched(_ossl_old_des_cblock *key,des_key_schedule schedule)
-	{
-	return DES_key_sched(key, (DES_key_schedule *)schedule);
-	}
-void _ossl_old_des_string_to_key(char *str,_ossl_old_des_cblock *key)
-	{
-	DES_string_to_key(str, key);
-	}
-void _ossl_old_des_string_to_2keys(char *str,_ossl_old_des_cblock *key1,_ossl_old_des_cblock *key2)
-	{
-	DES_string_to_2keys(str, key1, key2);
-	}
-void _ossl_old_des_cfb64_encrypt(unsigned char *in, unsigned char *out, long length,
-	des_key_schedule schedule, _ossl_old_des_cblock *ivec, int *num, int enc)
-	{
-	DES_cfb64_encrypt(in, out, length, (DES_key_schedule *)schedule,
-		ivec, num, enc);
-	}
-void _ossl_old_des_ofb64_encrypt(unsigned char *in, unsigned char *out, long length,
-	des_key_schedule schedule, _ossl_old_des_cblock *ivec, int *num)
-	{
-	DES_ofb64_encrypt(in, out, length, (DES_key_schedule *)schedule,
-		ivec, num);
-	}
diff --git a/crypto/openssl/crypto/des/des_old.h b/crypto/openssl/crypto/des/des_old.h
deleted file mode 100644
index 1b0620c3a2e1..000000000000
--- a/crypto/openssl/crypto/des/des_old.h
+++ /dev/null
@@ -1,445 +0,0 @@
-/* crypto/des/des_old.h -*- mode:C; c-file-style: "eay" -*- */
-
-/* WARNING WARNING WARNING WARNING WARNING WARNING WARNING WARNING
- *
- * The function names in here are deprecated and are only present to
- * provide an interface compatible with openssl 0.9.6 and older as
- * well as libdes.  OpenSSL now provides functions where "des_" has
- * been replaced with "DES_" in the names, to make it possible to
- * make incompatible changes that are needed for C type security and
- * other stuff.
- *
- * This include files has two compatibility modes:
- *
- *   - If OPENSSL_DES_LIBDES_COMPATIBILITY is defined, you get an API
- *     that is compatible with libdes and SSLeay.
- *   - If OPENSSL_DES_LIBDES_COMPATIBILITY isn't defined, you get an
- *     API that is compatible with OpenSSL 0.9.5x to 0.9.6x.
- *
- * Note that these modes break earlier snapshots of OpenSSL, where
- * libdes compatibility was the only available mode or (later on) the
- * prefered compatibility mode.  However, after much consideration
- * (and more or less violent discussions with external parties), it
- * was concluded that OpenSSL should be compatible with earlier versions
- * of itself before anything else.  Also, in all honesty, libdes is
- * an old beast that shouldn't really be used any more.
- *
- * Please consider starting to use the DES_ functions rather than the
- * des_ ones.  The des_ functions will disappear completely before
- * OpenSSL 1.0!
- *
- * WARNING WARNING WARNING WARNING WARNING WARNING WARNING WARNING
- */
-
-/* Written by Richard Levitte (richard@levitte.org) for the OpenSSL
- * project 2001.
- */
-/* ====================================================================
- * Copyright (c) 1998-2002 The OpenSSL Project.  All rights reserved.
- *
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions
- * are met:
- *
- * 1. Redistributions of source code must retain the above copyright
- *    notice, this list of conditions and the following disclaimer. 
- *
- * 2. Redistributions in binary form must reproduce the above copyright
- *    notice, this list of conditions and the following disclaimer in
- *    the documentation and/or other materials provided with the
- *    distribution.
- *
- * 3. All advertising materials mentioning features or use of this
- *    software must display the following acknowledgment:
- *    "This product includes software developed by the OpenSSL Project
- *    for use in the OpenSSL Toolkit. (http://www.openssl.org/)"
- *
- * 4. The names "OpenSSL Toolkit" and "OpenSSL Project" must not be used to
- *    endorse or promote products derived from this software without
- *    prior written permission. For written permission, please contact
- *    openssl-core@openssl.org.
- *
- * 5. Products derived from this software may not be called "OpenSSL"
- *    nor may "OpenSSL" appear in their names without prior written
- *    permission of the OpenSSL Project.
- *
- * 6. Redistributions of any form whatsoever must retain the following
- *    acknowledgment:
- *    "This product includes software developed by the OpenSSL Project
- *    for use in the OpenSSL Toolkit (http://www.openssl.org/)"
- *
- * THIS SOFTWARE IS PROVIDED BY THE OpenSSL PROJECT ``AS IS'' AND ANY
- * EXPRESSED OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
- * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR
- * PURPOSE ARE DISCLAIMED.  IN NO EVENT SHALL THE OpenSSL PROJECT OR
- * ITS CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
- * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
- * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
- * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
- * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
- * STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
- * ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED
- * OF THE POSSIBILITY OF SUCH DAMAGE.
- * ====================================================================
- *
- * This product includes cryptographic software written by Eric Young
- * (eay@cryptsoft.com).  This product includes software written by Tim
- * Hudson (tjh@cryptsoft.com).
- *
- */
-
-#ifndef HEADER_DES_H
-#define HEADER_DES_H
-
-#include <openssl/e_os2.h>	/* OPENSSL_EXTERN, OPENSSL_NO_DES, DES_LONG */
-
-#ifdef OPENSSL_NO_DES
-#error DES is disabled.
-#endif
-
-#ifndef HEADER_NEW_DES_H
-#error You must include des.h, not des_old.h directly.
-#endif
-
-#ifdef _KERBEROS_DES_H
-#error <openssl/des_old.h> replaces <kerberos/des.h>.
-#endif
-
-#include <openssl/symhacks.h>
-
-#ifdef OPENSSL_BUILD_SHLIBCRYPTO
-# undef OPENSSL_EXTERN
-# define OPENSSL_EXTERN OPENSSL_EXPORT
-#endif
-
-#ifdef  __cplusplus
-extern "C" {
-#endif
-
-#ifdef _
-#undef _
-#endif
-
-typedef unsigned char _ossl_old_des_cblock[8];
-typedef struct _ossl_old_des_ks_struct
-	{
-	union	{
-		_ossl_old_des_cblock _;
-		/* make sure things are correct size on machines with
-		 * 8 byte longs */
-		DES_LONG pad[2];
-		} ks;
-	} _ossl_old_des_key_schedule[16];
-
-#ifndef OPENSSL_DES_LIBDES_COMPATIBILITY
-#define des_cblock DES_cblock
-#define const_des_cblock const_DES_cblock
-#define des_key_schedule DES_key_schedule
-#define des_ecb3_encrypt(i,o,k1,k2,k3,e)\
-	DES_ecb3_encrypt((i),(o),&(k1),&(k2),&(k3),(e))
-#define des_ede3_cbc_encrypt(i,o,l,k1,k2,k3,iv,e)\
-	DES_ede3_cbc_encrypt((i),(o),(l),&(k1),&(k2),&(k3),(iv),(e))
-#define des_ede3_cbcm_encrypt(i,o,l,k1,k2,k3,iv1,iv2,e)\
-	DES_ede3_cbcm_encrypt((i),(o),(l),&(k1),&(k2),&(k3),(iv1),(iv2),(e))
-#define des_ede3_cfb64_encrypt(i,o,l,k1,k2,k3,iv,n,e)\
-	DES_ede3_cfb64_encrypt((i),(o),(l),&(k1),&(k2),&(k3),(iv),(n),(e))
-#define des_ede3_ofb64_encrypt(i,o,l,k1,k2,k3,iv,n)\
-	DES_ede3_ofb64_encrypt((i),(o),(l),&(k1),&(k2),&(k3),(iv),(n))
-#define des_options()\
-	DES_options()
-#define des_cbc_cksum(i,o,l,k,iv)\
-	DES_cbc_cksum((i),(o),(l),&(k),(iv))
-#define des_cbc_encrypt(i,o,l,k,iv,e)\
-	DES_cbc_encrypt((i),(o),(l),&(k),(iv),(e))
-#define des_ncbc_encrypt(i,o,l,k,iv,e)\
-	DES_ncbc_encrypt((i),(o),(l),&(k),(iv),(e))
-#define des_xcbc_encrypt(i,o,l,k,iv,inw,outw,e)\
-	DES_xcbc_encrypt((i),(o),(l),&(k),(iv),(inw),(outw),(e))
-#define des_cfb_encrypt(i,o,n,l,k,iv,e)\
-	DES_cfb_encrypt((i),(o),(n),(l),&(k),(iv),(e))
-#define des_ecb_encrypt(i,o,k,e)\
-	DES_ecb_encrypt((i),(o),&(k),(e))
-#define des_encrypt1(d,k,e)\
-	DES_encrypt1((d),&(k),(e))
-#define des_encrypt2(d,k,e)\
-	DES_encrypt2((d),&(k),(e))
-#define des_encrypt3(d,k1,k2,k3)\
-	DES_encrypt3((d),&(k1),&(k2),&(k3))
-#define des_decrypt3(d,k1,k2,k3)\
-	DES_decrypt3((d),&(k1),&(k2),&(k3))
-#define des_xwhite_in2out(k,i,o)\
-	DES_xwhite_in2out((k),(i),(o))
-#define des_enc_read(f,b,l,k,iv)\
-	DES_enc_read((f),(b),(l),&(k),(iv))
-#define des_enc_write(f,b,l,k,iv)\
-	DES_enc_write((f),(b),(l),&(k),(iv))
-#define des_fcrypt(b,s,r)\
-	DES_fcrypt((b),(s),(r))
-#if 0
-#define des_crypt(b,s)\
-	DES_crypt((b),(s))
-#if !defined(PERL5) && !defined(__FreeBSD__) && !defined(NeXT) && !defined(__OpenBSD__)
-#define crypt(b,s)\
-	DES_crypt((b),(s))
-#endif
-#endif
-#define des_ofb_encrypt(i,o,n,l,k,iv)\
-	DES_ofb_encrypt((i),(o),(n),(l),&(k),(iv))
-#define des_pcbc_encrypt(i,o,l,k,iv,e)\
-	DES_pcbc_encrypt((i),(o),(l),&(k),(iv),(e))
-#define des_quad_cksum(i,o,l,c,s)\
-	DES_quad_cksum((i),(o),(l),(c),(s))
-#define des_random_seed(k)\
-	_ossl_096_des_random_seed((k))
-#define des_random_key(r)\
-	DES_random_key((r))
-#define des_read_password(k,p,v) \
-	DES_read_password((k),(p),(v))
-#define des_read_2passwords(k1,k2,p,v) \
-	DES_read_2passwords((k1),(k2),(p),(v))
-#define des_set_odd_parity(k)\
-	DES_set_odd_parity((k))
-#define des_check_key_parity(k)\
-	DES_check_key_parity((k))
-#define des_is_weak_key(k)\
-	DES_is_weak_key((k))
-#define des_set_key(k,ks)\
-	DES_set_key((k),&(ks))
-#define des_key_sched(k,ks)\
-	DES_key_sched((k),&(ks))
-#define des_set_key_checked(k,ks)\
-	DES_set_key_checked((k),&(ks))
-#define des_set_key_unchecked(k,ks)\
-	DES_set_key_unchecked((k),&(ks))
-#define des_string_to_key(s,k)\
-	DES_string_to_key((s),(k))
-#define des_string_to_2keys(s,k1,k2)\
-	DES_string_to_2keys((s),(k1),(k2))
-#define des_cfb64_encrypt(i,o,l,ks,iv,n,e)\
-	DES_cfb64_encrypt((i),(o),(l),&(ks),(iv),(n),(e))
-#define des_ofb64_encrypt(i,o,l,ks,iv,n)\
-	DES_ofb64_encrypt((i),(o),(l),&(ks),(iv),(n))
-		
-
-#define des_ecb2_encrypt(i,o,k1,k2,e) \
-	des_ecb3_encrypt((i),(o),(k1),(k2),(k1),(e))
-
-#define des_ede2_cbc_encrypt(i,o,l,k1,k2,iv,e) \
-	des_ede3_cbc_encrypt((i),(o),(l),(k1),(k2),(k1),(iv),(e))
-
-#define des_ede2_cfb64_encrypt(i,o,l,k1,k2,iv,n,e) \
-	des_ede3_cfb64_encrypt((i),(o),(l),(k1),(k2),(k1),(iv),(n),(e))
-
-#define des_ede2_ofb64_encrypt(i,o,l,k1,k2,iv,n) \
-	des_ede3_ofb64_encrypt((i),(o),(l),(k1),(k2),(k1),(iv),(n))
-
-#define des_check_key DES_check_key
-#define des_rw_mode DES_rw_mode
-#else /* libdes compatibility */
-/* Map all symbol names to _ossl_old_des_* form, so we avoid all
-   clashes with libdes */
-#define des_cblock _ossl_old_des_cblock
-#define des_key_schedule _ossl_old_des_key_schedule
-#define des_ecb3_encrypt(i,o,k1,k2,k3,e)\
-	_ossl_old_des_ecb3_encrypt((i),(o),(k1),(k2),(k3),(e))
-#define des_ede3_cbc_encrypt(i,o,l,k1,k2,k3,iv,e)\
-	_ossl_old_des_ede3_cbc_encrypt((i),(o),(l),(k1),(k2),(k3),(iv),(e))
-#define des_ede3_cfb64_encrypt(i,o,l,k1,k2,k3,iv,n,e)\
-	_ossl_old_des_ede3_cfb64_encrypt((i),(o),(l),(k1),(k2),(k3),(iv),(n),(e))
-#define des_ede3_ofb64_encrypt(i,o,l,k1,k2,k3,iv,n)\
-	_ossl_old_des_ede3_ofb64_encrypt((i),(o),(l),(k1),(k2),(k3),(iv),(n))
-#define des_options()\
-	_ossl_old_des_options()
-#define des_cbc_cksum(i,o,l,k,iv)\
-	_ossl_old_des_cbc_cksum((i),(o),(l),(k),(iv))
-#define des_cbc_encrypt(i,o,l,k,iv,e)\
-	_ossl_old_des_cbc_encrypt((i),(o),(l),(k),(iv),(e))
-#define des_ncbc_encrypt(i,o,l,k,iv,e)\
-	_ossl_old_des_ncbc_encrypt((i),(o),(l),(k),(iv),(e))
-#define des_xcbc_encrypt(i,o,l,k,iv,inw,outw,e)\
-	_ossl_old_des_xcbc_encrypt((i),(o),(l),(k),(iv),(inw),(outw),(e))
-#define des_cfb_encrypt(i,o,n,l,k,iv,e)\
-	_ossl_old_des_cfb_encrypt((i),(o),(n),(l),(k),(iv),(e))
-#define des_ecb_encrypt(i,o,k,e)\
-	_ossl_old_des_ecb_encrypt((i),(o),(k),(e))
-#define des_encrypt(d,k,e)\
-	_ossl_old_des_encrypt((d),(k),(e))
-#define des_encrypt2(d,k,e)\
-	_ossl_old_des_encrypt2((d),(k),(e))
-#define des_encrypt3(d,k1,k2,k3)\
-	_ossl_old_des_encrypt3((d),(k1),(k2),(k3))
-#define des_decrypt3(d,k1,k2,k3)\
-	_ossl_old_des_decrypt3((d),(k1),(k2),(k3))
-#define des_xwhite_in2out(k,i,o)\
-	_ossl_old_des_xwhite_in2out((k),(i),(o))
-#define des_enc_read(f,b,l,k,iv)\
-	_ossl_old_des_enc_read((f),(b),(l),(k),(iv))
-#define des_enc_write(f,b,l,k,iv)\
-	_ossl_old_des_enc_write((f),(b),(l),(k),(iv))
-#define des_fcrypt(b,s,r)\
-	_ossl_old_des_fcrypt((b),(s),(r))
-#define des_crypt(b,s)\
-	_ossl_old_des_crypt((b),(s))
-#if 0
-#define crypt(b,s)\
-	_ossl_old_crypt((b),(s))
-#endif
-#define des_ofb_encrypt(i,o,n,l,k,iv)\
-	_ossl_old_des_ofb_encrypt((i),(o),(n),(l),(k),(iv))
-#define des_pcbc_encrypt(i,o,l,k,iv,e)\
-	_ossl_old_des_pcbc_encrypt((i),(o),(l),(k),(iv),(e))
-#define des_quad_cksum(i,o,l,c,s)\
-	_ossl_old_des_quad_cksum((i),(o),(l),(c),(s))
-#define des_random_seed(k)\
-	_ossl_old_des_random_seed((k))
-#define des_random_key(r)\
-	_ossl_old_des_random_key((r))
-#define des_read_password(k,p,v) \
-	_ossl_old_des_read_password((k),(p),(v))
-#define des_read_2passwords(k1,k2,p,v) \
-	_ossl_old_des_read_2passwords((k1),(k2),(p),(v))
-#define des_set_odd_parity(k)\
-	_ossl_old_des_set_odd_parity((k))
-#define des_is_weak_key(k)\
-	_ossl_old_des_is_weak_key((k))
-#define des_set_key(k,ks)\
-	_ossl_old_des_set_key((k),(ks))
-#define des_key_sched(k,ks)\
-	_ossl_old_des_key_sched((k),(ks))
-#define des_string_to_key(s,k)\
-	_ossl_old_des_string_to_key((s),(k))
-#define des_string_to_2keys(s,k1,k2)\
-	_ossl_old_des_string_to_2keys((s),(k1),(k2))
-#define des_cfb64_encrypt(i,o,l,ks,iv,n,e)\
-	_ossl_old_des_cfb64_encrypt((i),(o),(l),(ks),(iv),(n),(e))
-#define des_ofb64_encrypt(i,o,l,ks,iv,n)\
-	_ossl_old_des_ofb64_encrypt((i),(o),(l),(ks),(iv),(n))
-		
-
-#define des_ecb2_encrypt(i,o,k1,k2,e) \
-	des_ecb3_encrypt((i),(o),(k1),(k2),(k1),(e))
-
-#define des_ede2_cbc_encrypt(i,o,l,k1,k2,iv,e) \
-	des_ede3_cbc_encrypt((i),(o),(l),(k1),(k2),(k1),(iv),(e))
-
-#define des_ede2_cfb64_encrypt(i,o,l,k1,k2,iv,n,e) \
-	des_ede3_cfb64_encrypt((i),(o),(l),(k1),(k2),(k1),(iv),(n),(e))
-
-#define des_ede2_ofb64_encrypt(i,o,l,k1,k2,iv,n) \
-	des_ede3_ofb64_encrypt((i),(o),(l),(k1),(k2),(k1),(iv),(n))
-
-#define des_check_key DES_check_key
-#define des_rw_mode DES_rw_mode
-#endif
-
-const char *_ossl_old_des_options(void);
-void _ossl_old_des_ecb3_encrypt(_ossl_old_des_cblock *input,_ossl_old_des_cblock *output,
-	_ossl_old_des_key_schedule ks1,_ossl_old_des_key_schedule ks2,
-	_ossl_old_des_key_schedule ks3, int enc);
-DES_LONG _ossl_old_des_cbc_cksum(_ossl_old_des_cblock *input,_ossl_old_des_cblock *output,
-	long length,_ossl_old_des_key_schedule schedule,_ossl_old_des_cblock *ivec);
-void _ossl_old_des_cbc_encrypt(_ossl_old_des_cblock *input,_ossl_old_des_cblock *output,long length,
-	_ossl_old_des_key_schedule schedule,_ossl_old_des_cblock *ivec,int enc);
-void _ossl_old_des_ncbc_encrypt(_ossl_old_des_cblock *input,_ossl_old_des_cblock *output,long length,
-	_ossl_old_des_key_schedule schedule,_ossl_old_des_cblock *ivec,int enc);
-void _ossl_old_des_xcbc_encrypt(_ossl_old_des_cblock *input,_ossl_old_des_cblock *output,long length,
-	_ossl_old_des_key_schedule schedule,_ossl_old_des_cblock *ivec,
-	_ossl_old_des_cblock *inw,_ossl_old_des_cblock *outw,int enc);
-void _ossl_old_des_cfb_encrypt(unsigned char *in,unsigned char *out,int numbits,
-	long length,_ossl_old_des_key_schedule schedule,_ossl_old_des_cblock *ivec,int enc);
-void _ossl_old_des_ecb_encrypt(_ossl_old_des_cblock *input,_ossl_old_des_cblock *output,
-	_ossl_old_des_key_schedule ks,int enc);
-void _ossl_old_des_encrypt(DES_LONG *data,_ossl_old_des_key_schedule ks, int enc);
-void _ossl_old_des_encrypt2(DES_LONG *data,_ossl_old_des_key_schedule ks, int enc);
-void _ossl_old_des_encrypt3(DES_LONG *data, _ossl_old_des_key_schedule ks1,
-	_ossl_old_des_key_schedule ks2, _ossl_old_des_key_schedule ks3);
-void _ossl_old_des_decrypt3(DES_LONG *data, _ossl_old_des_key_schedule ks1,
-	_ossl_old_des_key_schedule ks2, _ossl_old_des_key_schedule ks3);
-void _ossl_old_des_ede3_cbc_encrypt(_ossl_old_des_cblock *input, _ossl_old_des_cblock *output, 
-	long length, _ossl_old_des_key_schedule ks1, _ossl_old_des_key_schedule ks2, 
-	_ossl_old_des_key_schedule ks3, _ossl_old_des_cblock *ivec, int enc);
-void _ossl_old_des_ede3_cfb64_encrypt(unsigned char *in, unsigned char *out,
-	long length, _ossl_old_des_key_schedule ks1, _ossl_old_des_key_schedule ks2,
-	_ossl_old_des_key_schedule ks3, _ossl_old_des_cblock *ivec, int *num, int enc);
-void _ossl_old_des_ede3_ofb64_encrypt(unsigned char *in, unsigned char *out,
-	long length, _ossl_old_des_key_schedule ks1, _ossl_old_des_key_schedule ks2,
-	_ossl_old_des_key_schedule ks3, _ossl_old_des_cblock *ivec, int *num);
-
-void _ossl_old_des_xwhite_in2out(_ossl_old_des_cblock (*des_key), _ossl_old_des_cblock (*in_white),
-	_ossl_old_des_cblock (*out_white));
-
-int _ossl_old_des_enc_read(int fd,char *buf,int len,_ossl_old_des_key_schedule sched,
-	_ossl_old_des_cblock *iv);
-int _ossl_old_des_enc_write(int fd,char *buf,int len,_ossl_old_des_key_schedule sched,
-	_ossl_old_des_cblock *iv);
-char *_ossl_old_des_fcrypt(const char *buf,const char *salt, char *ret);
-char *_ossl_old_des_crypt(const char *buf,const char *salt);
-#if !defined(PERL5) && !defined(NeXT)
-char *_ossl_old_crypt(const char *buf,const char *salt);
-#endif
-void _ossl_old_des_ofb_encrypt(unsigned char *in,unsigned char *out,
-	int numbits,long length,_ossl_old_des_key_schedule schedule,_ossl_old_des_cblock *ivec);
-void _ossl_old_des_pcbc_encrypt(_ossl_old_des_cblock *input,_ossl_old_des_cblock *output,long length,
-	_ossl_old_des_key_schedule schedule,_ossl_old_des_cblock *ivec,int enc);
-DES_LONG _ossl_old_des_quad_cksum(_ossl_old_des_cblock *input,_ossl_old_des_cblock *output,
-	long length,int out_count,_ossl_old_des_cblock *seed);
-void _ossl_old_des_random_seed(_ossl_old_des_cblock key);
-void _ossl_old_des_random_key(_ossl_old_des_cblock ret);
-int _ossl_old_des_read_password(_ossl_old_des_cblock *key,const char *prompt,int verify);
-int _ossl_old_des_read_2passwords(_ossl_old_des_cblock *key1,_ossl_old_des_cblock *key2,
-	const char *prompt,int verify);
-void _ossl_old_des_set_odd_parity(_ossl_old_des_cblock *key);
-int _ossl_old_des_is_weak_key(_ossl_old_des_cblock *key);
-int _ossl_old_des_set_key(_ossl_old_des_cblock *key,_ossl_old_des_key_schedule schedule);
-int _ossl_old_des_key_sched(_ossl_old_des_cblock *key,_ossl_old_des_key_schedule schedule);
-void _ossl_old_des_string_to_key(char *str,_ossl_old_des_cblock *key);
-void _ossl_old_des_string_to_2keys(char *str,_ossl_old_des_cblock *key1,_ossl_old_des_cblock *key2);
-void _ossl_old_des_cfb64_encrypt(unsigned char *in, unsigned char *out, long length,
-	_ossl_old_des_key_schedule schedule, _ossl_old_des_cblock *ivec, int *num, int enc);
-void _ossl_old_des_ofb64_encrypt(unsigned char *in, unsigned char *out, long length,
-	_ossl_old_des_key_schedule schedule, _ossl_old_des_cblock *ivec, int *num);
-
-void _ossl_096_des_random_seed(des_cblock *key);
-
-/* The following definitions provide compatibility with the MIT Kerberos
- * library. The _ossl_old_des_key_schedule structure is not binary compatible. */
-
-#define _KERBEROS_DES_H
-
-#define KRBDES_ENCRYPT DES_ENCRYPT
-#define KRBDES_DECRYPT DES_DECRYPT
-
-#ifdef KERBEROS
-#  define ENCRYPT DES_ENCRYPT
-#  define DECRYPT DES_DECRYPT
-#endif
-
-#ifndef NCOMPAT
-#  define C_Block des_cblock
-#  define Key_schedule des_key_schedule
-#  define KEY_SZ DES_KEY_SZ
-#  define string_to_key des_string_to_key
-#  define read_pw_string des_read_pw_string
-#  define random_key des_random_key
-#  define pcbc_encrypt des_pcbc_encrypt
-#  define set_key des_set_key
-#  define key_sched des_key_sched
-#  define ecb_encrypt des_ecb_encrypt
-#  define cbc_encrypt des_cbc_encrypt
-#  define ncbc_encrypt des_ncbc_encrypt
-#  define xcbc_encrypt des_xcbc_encrypt
-#  define cbc_cksum des_cbc_cksum
-#  define quad_cksum des_quad_cksum
-#  define check_parity des_check_key_parity
-#endif
-
-#define des_fixup_key_parity DES_fixup_key_parity
-
-#ifdef  __cplusplus
-}
-#endif
-
-/* for DES_read_pw_string et al */
-#include <openssl/ui_compat.h>
-
-#endif
diff --git a/crypto/openssl/crypto/des/des_old2.c b/crypto/openssl/crypto/des/des_old2.c
deleted file mode 100644
index c8fa3ee1352f..000000000000
--- a/crypto/openssl/crypto/des/des_old2.c
+++ /dev/null
@@ -1,82 +0,0 @@
-/* crypto/des/des_old.c -*- mode:C; c-file-style: "eay" -*- */
-
-/* WARNING WARNING WARNING WARNING WARNING WARNING WARNING WARNING
- *
- * The function names in here are deprecated and are only present to
- * provide an interface compatible with OpenSSL 0.9.6c.  OpenSSL now
- * provides functions where "des_" has been replaced with "DES_" in
- * the names, to make it possible to make incompatible changes that
- * are needed for C type security and other stuff.
- *
- * Please consider starting to use the DES_ functions rather than the
- * des_ ones.  The des_ functions will dissapear completely before
- * OpenSSL 1.0!
- *
- * WARNING WARNING WARNING WARNING WARNING WARNING WARNING WARNING
- */
-
-/* Written by Richard Levitte (richard@levitte.org) for the OpenSSL
- * project 2001.
- */
-/* ====================================================================
- * Copyright (c) 1998-2001 The OpenSSL Project.  All rights reserved.
- *
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions
- * are met:
- *
- * 1. Redistributions of source code must retain the above copyright
- *    notice, this list of conditions and the following disclaimer. 
- *
- * 2. Redistributions in binary form must reproduce the above copyright
- *    notice, this list of conditions and the following disclaimer in
- *    the documentation and/or other materials provided with the
- *    distribution.
- *
- * 3. All advertising materials mentioning features or use of this
- *    software must display the following acknowledgment:
- *    "This product includes software developed by the OpenSSL Project
- *    for use in the OpenSSL Toolkit. (http://www.openssl.org/)"
- *
- * 4. The names "OpenSSL Toolkit" and "OpenSSL Project" must not be used to
- *    endorse or promote products derived from this software without
- *    prior written permission. For written permission, please contact
- *    openssl-core@openssl.org.
- *
- * 5. Products derived from this software may not be called "OpenSSL"
- *    nor may "OpenSSL" appear in their names without prior written
- *    permission of the OpenSSL Project.
- *
- * 6. Redistributions of any form whatsoever must retain the following
- *    acknowledgment:
- *    "This product includes software developed by the OpenSSL Project
- *    for use in the OpenSSL Toolkit (http://www.openssl.org/)"
- *
- * THIS SOFTWARE IS PROVIDED BY THE OpenSSL PROJECT ``AS IS'' AND ANY
- * EXPRESSED OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
- * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR
- * PURPOSE ARE DISCLAIMED.  IN NO EVENT SHALL THE OpenSSL PROJECT OR
- * ITS CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
- * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
- * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
- * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
- * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
- * STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
- * ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED
- * OF THE POSSIBILITY OF SUCH DAMAGE.
- * ====================================================================
- *
- * This product includes cryptographic software written by Eric Young
- * (eay@cryptsoft.com).  This product includes software written by Tim
- * Hudson (tjh@cryptsoft.com).
- *
- */
-
-#undef OPENSSL_DES_LIBDES_COMPATIBILITY
-#include <openssl/des.h>
-#include <openssl/rand.h>
-
-void _ossl_096_des_random_seed(DES_cblock *key)
-	{
-	RAND_seed(key, sizeof(DES_cblock));
-	}
diff --git a/crypto/openssl/crypto/des/des_opts.c b/crypto/openssl/crypto/des/des_opts.c
deleted file mode 100644
index 2df82962c5ab..000000000000
--- a/crypto/openssl/crypto/des/des_opts.c
+++ /dev/null
@@ -1,608 +0,0 @@
-/* crypto/des/des_opts.c */
-/* Copyright (C) 1995-1998 Eric Young (eay@cryptsoft.com)
- * All rights reserved.
- *
- * This package is an SSL implementation written
- * by Eric Young (eay@cryptsoft.com).
- * The implementation was written so as to conform with Netscapes SSL.
- * 
- * This library is free for commercial and non-commercial use as long as
- * the following conditions are aheared to.  The following conditions
- * apply to all code found in this distribution, be it the RC4, RSA,
- * lhash, DES, etc., code; not just the SSL code.  The SSL documentation
- * included with this distribution is covered by the same copyright terms
- * except that the holder is Tim Hudson (tjh@cryptsoft.com).
- * 
- * Copyright remains Eric Young's, and as such any Copyright notices in
- * the code are not to be removed.
- * If this package is used in a product, Eric Young should be given attribution
- * as the author of the parts of the library used.
- * This can be in the form of a textual message at program startup or
- * in documentation (online or textual) provided with the package.
- * 
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions
- * are met:
- * 1. Redistributions of source code must retain the copyright
- *    notice, this list of conditions and the following disclaimer.
- * 2. Redistributions in binary form must reproduce the above copyright
- *    notice, this list of conditions and the following disclaimer in the
- *    documentation and/or other materials provided with the distribution.
- * 3. All advertising materials mentioning features or use of this software
- *    must display the following acknowledgement:
- *    "This product includes cryptographic software written by
- *     Eric Young (eay@cryptsoft.com)"
- *    The word 'cryptographic' can be left out if the rouines from the library
- *    being used are not cryptographic related :-).
- * 4. If you include any Windows specific code (or a derivative thereof) from 
- *    the apps directory (application code) you must include an acknowledgement:
- *    "This product includes software written by Tim Hudson (tjh@cryptsoft.com)"
- * 
- * THIS SOFTWARE IS PROVIDED BY ERIC YOUNG ``AS IS'' AND
- * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
- * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
- * ARE DISCLAIMED.  IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE
- * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
- * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
- * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
- * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
- * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
- * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
- * SUCH DAMAGE.
- * 
- * The licence and distribution terms for any publically available version or
- * derivative of this code cannot be changed.  i.e. this code cannot simply be
- * copied and put under another distribution licence
- * [including the GNU Public Licence.]
- */
-
-/* define PART1, PART2, PART3 or PART4 to build only with a few of the options.
- * This is for machines with 64k code segment size restrictions. */
-
-#if !defined(OPENSSL_SYS_MSDOS) && (!defined(OPENSSL_SYS_VMS) || defined(__DECC)) && !defined(OPENSSL_SYS_MACOSX)
-#define TIMES
-#endif
-
-#include <stdio.h>
-#ifndef OPENSSL_SYS_MSDOS
-#include <openssl/e_os2.h>
-#include OPENSSL_UNISTD
-#else
-#include <io.h>
-extern void exit();
-#endif
-
-#ifndef OPENSSL_SYS_NETWARE
-#include <signal.h>
-#endif
-
-#ifndef _IRIX
-#include <time.h>
-#endif
-#ifdef TIMES
-#include <sys/types.h>
-#include <sys/times.h>
-#endif
-
-/* Depending on the VMS version, the tms structure is perhaps defined.
-   The __TMS macro will show if it was.  If it wasn't defined, we should
-   undefine TIMES, since that tells the rest of the program how things
-   should be handled.				-- Richard Levitte */
-#if defined(OPENSSL_SYS_VMS_DECC) && !defined(__TMS)
-#undef TIMES
-#endif
-
-#ifndef TIMES
-#include <sys/timeb.h>
-#endif
-
-
-#if defined(sun) || defined(__ultrix)
-#define _POSIX_SOURCE
-#include <limits.h>
-#include <sys/param.h>
-#endif
-
-#include <openssl/des.h>
-#include "spr.h"
-
-#define DES_DEFAULT_OPTIONS
-
-#if !defined(PART1) && !defined(PART2) && !defined(PART3) && !defined(PART4)
-#define PART1
-#define PART2
-#define PART3
-#define PART4
-#endif
-
-#ifdef PART1
-
-#undef DES_UNROLL
-#undef DES_RISC1
-#undef DES_RISC2
-#undef DES_PTR
-#undef D_ENCRYPT
-#define DES_encrypt1 des_encrypt_u4_cisc_idx
-#define DES_encrypt2 des_encrypt2_u4_cisc_idx
-#define DES_encrypt3 des_encrypt3_u4_cisc_idx
-#define DES_decrypt3 des_decrypt3_u4_cisc_idx
-#undef HEADER_DES_LOCL_H
-#include "des_enc.c"
-
-#define DES_UNROLL
-#undef DES_RISC1
-#undef DES_RISC2
-#undef DES_PTR
-#undef D_ENCRYPT
-#undef DES_encrypt1
-#undef DES_encrypt2
-#undef DES_encrypt3
-#undef DES_decrypt3
-#define DES_encrypt1 des_encrypt_u16_cisc_idx
-#define DES_encrypt2 des_encrypt2_u16_cisc_idx
-#define DES_encrypt3 des_encrypt3_u16_cisc_idx
-#define DES_decrypt3 des_decrypt3_u16_cisc_idx
-#undef HEADER_DES_LOCL_H
-#include "des_enc.c"
-
-#undef DES_UNROLL
-#define DES_RISC1
-#undef DES_RISC2
-#undef DES_PTR
-#undef D_ENCRYPT
-#undef DES_encrypt1
-#undef DES_encrypt2
-#undef DES_encrypt3
-#undef DES_decrypt3
-#define DES_encrypt1 des_encrypt_u4_risc1_idx
-#define DES_encrypt2 des_encrypt2_u4_risc1_idx
-#define DES_encrypt3 des_encrypt3_u4_risc1_idx
-#define DES_decrypt3 des_decrypt3_u4_risc1_idx
-#undef HEADER_DES_LOCL_H
-#include "des_enc.c"
-
-#endif
-
-#ifdef PART2
-
-#undef DES_UNROLL
-#undef DES_RISC1
-#define DES_RISC2
-#undef DES_PTR
-#undef D_ENCRYPT
-#undef DES_encrypt1
-#undef DES_encrypt2
-#undef DES_encrypt3
-#undef DES_decrypt3
-#define DES_encrypt1 des_encrypt_u4_risc2_idx
-#define DES_encrypt2 des_encrypt2_u4_risc2_idx
-#define DES_encrypt3 des_encrypt3_u4_risc2_idx
-#define DES_decrypt3 des_decrypt3_u4_risc2_idx
-#undef HEADER_DES_LOCL_H
-#include "des_enc.c"
-
-#define DES_UNROLL
-#define DES_RISC1
-#undef DES_RISC2
-#undef DES_PTR
-#undef D_ENCRYPT
-#undef DES_encrypt1
-#undef DES_encrypt2
-#undef DES_encrypt3
-#undef DES_decrypt3
-#define DES_encrypt1 des_encrypt_u16_risc1_idx
-#define DES_encrypt2 des_encrypt2_u16_risc1_idx
-#define DES_encrypt3 des_encrypt3_u16_risc1_idx
-#define DES_decrypt3 des_decrypt3_u16_risc1_idx
-#undef HEADER_DES_LOCL_H
-#include "des_enc.c"
-
-#define DES_UNROLL
-#undef DES_RISC1
-#define DES_RISC2
-#undef DES_PTR
-#undef D_ENCRYPT
-#undef DES_encrypt1
-#undef DES_encrypt2
-#undef DES_encrypt3
-#undef DES_decrypt3
-#define DES_encrypt1 des_encrypt_u16_risc2_idx
-#define DES_encrypt2 des_encrypt2_u16_risc2_idx
-#define DES_encrypt3 des_encrypt3_u16_risc2_idx
-#define DES_decrypt3 des_decrypt3_u16_risc2_idx
-#undef HEADER_DES_LOCL_H
-#include "des_enc.c"
-
-#endif
-
-#ifdef PART3
-
-#undef DES_UNROLL
-#undef DES_RISC1
-#undef DES_RISC2
-#define DES_PTR
-#undef D_ENCRYPT
-#undef DES_encrypt1
-#undef DES_encrypt2
-#undef DES_encrypt3
-#undef DES_decrypt3
-#define DES_encrypt1 des_encrypt_u4_cisc_ptr
-#define DES_encrypt2 des_encrypt2_u4_cisc_ptr
-#define DES_encrypt3 des_encrypt3_u4_cisc_ptr
-#define DES_decrypt3 des_decrypt3_u4_cisc_ptr
-#undef HEADER_DES_LOCL_H
-#include "des_enc.c"
-
-#define DES_UNROLL
-#undef DES_RISC1
-#undef DES_RISC2
-#define DES_PTR
-#undef D_ENCRYPT
-#undef DES_encrypt1
-#undef DES_encrypt2
-#undef DES_encrypt3
-#undef DES_decrypt3
-#define DES_encrypt1 des_encrypt_u16_cisc_ptr
-#define DES_encrypt2 des_encrypt2_u16_cisc_ptr
-#define DES_encrypt3 des_encrypt3_u16_cisc_ptr
-#define DES_decrypt3 des_decrypt3_u16_cisc_ptr
-#undef HEADER_DES_LOCL_H
-#include "des_enc.c"
-
-#undef DES_UNROLL
-#define DES_RISC1
-#undef DES_RISC2
-#define DES_PTR
-#undef D_ENCRYPT
-#undef DES_encrypt1
-#undef DES_encrypt2
-#undef DES_encrypt3
-#undef DES_decrypt3
-#define DES_encrypt1 des_encrypt_u4_risc1_ptr
-#define DES_encrypt2 des_encrypt2_u4_risc1_ptr
-#define DES_encrypt3 des_encrypt3_u4_risc1_ptr
-#define DES_decrypt3 des_decrypt3_u4_risc1_ptr
-#undef HEADER_DES_LOCL_H
-#include "des_enc.c"
-
-#endif
-
-#ifdef PART4
-
-#undef DES_UNROLL
-#undef DES_RISC1
-#define DES_RISC2
-#define DES_PTR
-#undef D_ENCRYPT
-#undef DES_encrypt1
-#undef DES_encrypt2
-#undef DES_encrypt3
-#undef DES_decrypt3
-#define DES_encrypt1 des_encrypt_u4_risc2_ptr
-#define DES_encrypt2 des_encrypt2_u4_risc2_ptr
-#define DES_encrypt3 des_encrypt3_u4_risc2_ptr
-#define DES_decrypt3 des_decrypt3_u4_risc2_ptr
-#undef HEADER_DES_LOCL_H
-#include "des_enc.c"
-
-#define DES_UNROLL
-#define DES_RISC1
-#undef DES_RISC2
-#define DES_PTR
-#undef D_ENCRYPT
-#undef DES_encrypt1
-#undef DES_encrypt2
-#undef DES_encrypt3
-#undef DES_decrypt3
-#define DES_encrypt1 des_encrypt_u16_risc1_ptr
-#define DES_encrypt2 des_encrypt2_u16_risc1_ptr
-#define DES_encrypt3 des_encrypt3_u16_risc1_ptr
-#define DES_decrypt3 des_decrypt3_u16_risc1_ptr
-#undef HEADER_DES_LOCL_H
-#include "des_enc.c"
-
-#define DES_UNROLL
-#undef DES_RISC1
-#define DES_RISC2
-#define DES_PTR
-#undef D_ENCRYPT
-#undef DES_encrypt1
-#undef DES_encrypt2
-#undef DES_encrypt3
-#undef DES_decrypt3
-#define DES_encrypt1 des_encrypt_u16_risc2_ptr
-#define DES_encrypt2 des_encrypt2_u16_risc2_ptr
-#define DES_encrypt3 des_encrypt3_u16_risc2_ptr
-#define DES_decrypt3 des_decrypt3_u16_risc2_ptr
-#undef HEADER_DES_LOCL_H
-#include "des_enc.c"
-
-#endif
-
-/* The following if from times(3) man page.  It may need to be changed */
-#ifndef HZ
-# ifndef CLK_TCK
-#  ifndef _BSD_CLK_TCK_ /* FreeBSD fix */
-#   define HZ	100.0
-#  else /* _BSD_CLK_TCK_ */
-#   define HZ ((double)_BSD_CLK_TCK_)
-#  endif
-# else /* CLK_TCK */
-#  define HZ ((double)CLK_TCK)
-# endif
-#endif
-
-#define BUFSIZE	((long)1024)
-long run=0;
-
-double Time_F(int s);
-#ifdef SIGALRM
-#if defined(__STDC__) || defined(sgi)
-#define SIGRETTYPE void
-#else
-#define SIGRETTYPE int
-#endif
-
-SIGRETTYPE sig_done(int sig);
-SIGRETTYPE sig_done(int sig)
-	{
-	signal(SIGALRM,sig_done);
-	run=0;
-#ifdef LINT
-	sig=sig;
-#endif
-	}
-#endif
-
-#define START	0
-#define STOP	1
-
-double Time_F(int s)
-	{
-	double ret;
-#ifdef TIMES
-	static struct tms tstart,tend;
-
-	if (s == START)
-		{
-		times(&tstart);
-		return(0);
-		}
-	else
-		{
-		times(&tend);
-		ret=((double)(tend.tms_utime-tstart.tms_utime))/HZ;
-		return((ret == 0.0)?1e-6:ret);
-		}
-#else /* !times() */
-	static struct timeb tstart,tend;
-	long i;
-
-	if (s == START)
-		{
-		ftime(&tstart);
-		return(0);
-		}
-	else
-		{
-		ftime(&tend);
-		i=(long)tend.millitm-(long)tstart.millitm;
-		ret=((double)(tend.time-tstart.time))+((double)i)/1000.0;
-		return((ret == 0.0)?1e-6:ret);
-		}
-#endif
-	}
-
-#ifdef SIGALRM
-#define print_name(name) fprintf(stderr,"Doing %s's for 10 seconds\n",name); alarm(10);
-#else
-#define print_name(name) fprintf(stderr,"Doing %s %ld times\n",name,cb);
-#endif
-	
-#define time_it(func,name,index) \
-	print_name(name); \
-	Time_F(START); \
-	for (count=0,run=1; COND(cb); count++) \
-		{ \
-		unsigned long d[2]; \
-		func(d,&sch,DES_ENCRYPT); \
-		} \
-	tm[index]=Time_F(STOP); \
-	fprintf(stderr,"%ld %s's in %.2f second\n",count,name,tm[index]); \
-	tm[index]=((double)COUNT(cb))/tm[index];
-
-#define print_it(name,index) \
-	fprintf(stderr,"%s bytes per sec = %12.2f (%5.1fuS)\n",name, \
-		tm[index]*8,1.0e6/tm[index]);
-
-int main(int argc, char **argv)
-	{
-	long count;
-	static unsigned char buf[BUFSIZE];
-	static DES_cblock key ={0x12,0x34,0x56,0x78,0x9a,0xbc,0xde,0xf0};
-	static DES_cblock key2={0x34,0x56,0x78,0x9a,0xbc,0xde,0xf0,0x12};
-	static DES_cblock key3={0x56,0x78,0x9a,0xbc,0xde,0xf0,0x12,0x34};
-	DES_key_schedule sch,sch2,sch3;
-	double d,tm[16],max=0;
-	int rank[16];
-	char *str[16];
-	int max_idx=0,i,num=0,j;
-#ifndef SIGALARM
-	long ca,cb,cc,cd,ce;
-#endif
-
-	for (i=0; i<12; i++)
-		{
-		tm[i]=0.0;
-		rank[i]=0;
-		}
-
-#ifndef TIMES
-	fprintf(stderr,"To get the most accurate results, try to run this\n");
-	fprintf(stderr,"program when this computer is idle.\n");
-#endif
-
-	DES_set_key_unchecked(&key,&sch);
-	DES_set_key_unchecked(&key2,&sch2);
-	DES_set_key_unchecked(&key3,&sch3);
-
-#ifndef SIGALRM
-	fprintf(stderr,"First we calculate the approximate speed ...\n");
-	DES_set_key_unchecked(&key,sch);
-	count=10;
-	do	{
-		long i;
-		unsigned long data[2];
-
-		count*=2;
-		Time_F(START);
-		for (i=count; i; i--)
-			DES_encrypt1(data,&(sch[0]),DES_ENCRYPT);
-		d=Time_F(STOP);
-		} while (d < 3.0);
-	ca=count;
-	cb=count*3;
-	cc=count*3*8/BUFSIZE+1;
-	cd=count*8/BUFSIZE+1;
-
-	ce=count/20+1;
-#define COND(d) (count != (d))
-#define COUNT(d) (d)
-#else
-#define COND(c) (run)
-#define COUNT(d) (count)
-        signal(SIGALRM,sig_done);
-        alarm(10);
-#endif
-
-#ifdef PART1
-	time_it(des_encrypt_u4_cisc_idx,  "des_encrypt_u4_cisc_idx  ", 0);
-	time_it(des_encrypt_u16_cisc_idx, "des_encrypt_u16_cisc_idx ", 1);
-	time_it(des_encrypt_u4_risc1_idx, "des_encrypt_u4_risc1_idx ", 2);
-	num+=3;
-#endif
-#ifdef PART2
-	time_it(des_encrypt_u16_risc1_idx,"des_encrypt_u16_risc1_idx", 3);
-	time_it(des_encrypt_u4_risc2_idx, "des_encrypt_u4_risc2_idx ", 4);
-	time_it(des_encrypt_u16_risc2_idx,"des_encrypt_u16_risc2_idx", 5);
-	num+=3;
-#endif
-#ifdef PART3
-	time_it(des_encrypt_u4_cisc_ptr,  "des_encrypt_u4_cisc_ptr  ", 6);
-	time_it(des_encrypt_u16_cisc_ptr, "des_encrypt_u16_cisc_ptr ", 7);
-	time_it(des_encrypt_u4_risc1_ptr, "des_encrypt_u4_risc1_ptr ", 8);
-	num+=3;
-#endif
-#ifdef PART4
-	time_it(des_encrypt_u16_risc1_ptr,"des_encrypt_u16_risc1_ptr", 9);
-	time_it(des_encrypt_u4_risc2_ptr, "des_encrypt_u4_risc2_ptr ",10);
-	time_it(des_encrypt_u16_risc2_ptr,"des_encrypt_u16_risc2_ptr",11);
-	num+=3;
-#endif
-
-#ifdef PART1
-	str[0]=" 4  c i";
-	print_it("des_encrypt_u4_cisc_idx  ",0);
-	max=tm[0];
-	max_idx=0;
-	str[1]="16  c i";
-	print_it("des_encrypt_u16_cisc_idx ",1);
-	if (max < tm[1]) { max=tm[1]; max_idx=1; }
-	str[2]=" 4 r1 i";
-	print_it("des_encrypt_u4_risc1_idx ",2);
-	if (max < tm[2]) { max=tm[2]; max_idx=2; }
-#endif
-#ifdef PART2
-	str[3]="16 r1 i";
-	print_it("des_encrypt_u16_risc1_idx",3);
-	if (max < tm[3]) { max=tm[3]; max_idx=3; }
-	str[4]=" 4 r2 i";
-	print_it("des_encrypt_u4_risc2_idx ",4);
-	if (max < tm[4]) { max=tm[4]; max_idx=4; }
-	str[5]="16 r2 i";
-	print_it("des_encrypt_u16_risc2_idx",5);
-	if (max < tm[5]) { max=tm[5]; max_idx=5; }
-#endif
-#ifdef PART3
-	str[6]=" 4  c p";
-	print_it("des_encrypt_u4_cisc_ptr  ",6);
-	if (max < tm[6]) { max=tm[6]; max_idx=6; }
-	str[7]="16  c p";
-	print_it("des_encrypt_u16_cisc_ptr ",7);
-	if (max < tm[7]) { max=tm[7]; max_idx=7; }
-	str[8]=" 4 r1 p";
-	print_it("des_encrypt_u4_risc1_ptr ",8);
-	if (max < tm[8]) { max=tm[8]; max_idx=8; }
-#endif
-#ifdef PART4
-	str[9]="16 r1 p";
-	print_it("des_encrypt_u16_risc1_ptr",9);
-	if (max < tm[9]) { max=tm[9]; max_idx=9; }
-	str[10]=" 4 r2 p";
-	print_it("des_encrypt_u4_risc2_ptr ",10);
-	if (max < tm[10]) { max=tm[10]; max_idx=10; }
-	str[11]="16 r2 p";
-	print_it("des_encrypt_u16_risc2_ptr",11);
-	if (max < tm[11]) { max=tm[11]; max_idx=11; }
-#endif
-	printf("options    des ecb/s\n");
-	printf("%s %12.2f 100.0%%\n",str[max_idx],tm[max_idx]);
-	d=tm[max_idx];
-	tm[max_idx]= -2.0;
-	max= -1.0;
-	for (;;)
-		{
-		for (i=0; i<12; i++)
-			{
-			if (max < tm[i]) { max=tm[i]; j=i; }
-			}
-		if (max < 0.0) break;
-		printf("%s %12.2f  %4.1f%%\n",str[j],tm[j],tm[j]/d*100.0);
-		tm[j]= -2.0;
-		max= -1.0;
-		}
-
-	switch (max_idx)
-		{
-	case 0:
-		printf("-DDES_DEFAULT_OPTIONS\n");
-		break;
-	case 1:
-		printf("-DDES_UNROLL\n");
-		break;
-	case 2:
-		printf("-DDES_RISC1\n");
-		break;
-	case 3:
-		printf("-DDES_UNROLL -DDES_RISC1\n");
-		break;
-	case 4:
-		printf("-DDES_RISC2\n");
-		break;
-	case 5:
-		printf("-DDES_UNROLL -DDES_RISC2\n");
-		break;
-	case 6:
-		printf("-DDES_PTR\n");
-		break;
-	case 7:
-		printf("-DDES_UNROLL -DDES_PTR\n");
-		break;
-	case 8:
-		printf("-DDES_RISC1 -DDES_PTR\n");
-		break;
-	case 9:
-		printf("-DDES_UNROLL -DDES_RISC1 -DDES_PTR\n");
-		break;
-	case 10:
-		printf("-DDES_RISC2 -DDES_PTR\n");
-		break;
-	case 11:
-		printf("-DDES_UNROLL -DDES_RISC2 -DDES_PTR\n");
-		break;
-		}
-	exit(0);
-#if defined(LINT) || defined(OPENSSL_SYS_MSDOS)
-	return(0);
-#endif
-	}
diff --git a/crypto/openssl/crypto/des/des_ver.h b/crypto/openssl/crypto/des/des_ver.h
deleted file mode 100644
index d1ada258a65c..000000000000
--- a/crypto/openssl/crypto/des/des_ver.h
+++ /dev/null
@@ -1,71 +0,0 @@
-/* crypto/des/des_ver.h */
-/* Copyright (C) 1995-1998 Eric Young (eay@cryptsoft.com)
- * All rights reserved.
- *
- * This package is an SSL implementation written
- * by Eric Young (eay@cryptsoft.com).
- * The implementation was written so as to conform with Netscapes SSL.
- * 
- * This library is free for commercial and non-commercial use as long as
- * the following conditions are aheared to.  The following conditions
- * apply to all code found in this distribution, be it the RC4, RSA,
- * lhash, DES, etc., code; not just the SSL code.  The SSL documentation
- * included with this distribution is covered by the same copyright terms
- * except that the holder is Tim Hudson (tjh@cryptsoft.com).
- * 
- * Copyright remains Eric Young's, and as such any Copyright notices in
- * the code are not to be removed.
- * If this package is used in a product, Eric Young should be given attribution
- * as the author of the parts of the library used.
- * This can be in the form of a textual message at program startup or
- * in documentation (online or textual) provided with the package.
- * 
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions
- * are met:
- * 1. Redistributions of source code must retain the copyright
- *    notice, this list of conditions and the following disclaimer.
- * 2. Redistributions in binary form must reproduce the above copyright
- *    notice, this list of conditions and the following disclaimer in the
- *    documentation and/or other materials provided with the distribution.
- * 3. All advertising materials mentioning features or use of this software
- *    must display the following acknowledgement:
- *    "This product includes cryptographic software written by
- *     Eric Young (eay@cryptsoft.com)"
- *    The word 'cryptographic' can be left out if the rouines from the library
- *    being used are not cryptographic related :-).
- * 4. If you include any Windows specific code (or a derivative thereof) from 
- *    the apps directory (application code) you must include an acknowledgement:
- *    "This product includes software written by Tim Hudson (tjh@cryptsoft.com)"
- * 
- * THIS SOFTWARE IS PROVIDED BY ERIC YOUNG ``AS IS'' AND
- * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
- * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
- * ARE DISCLAIMED.  IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE
- * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
- * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
- * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
- * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
- * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
- * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
- * SUCH DAMAGE.
- * 
- * The licence and distribution terms for any publically available version or
- * derivative of this code cannot be changed.  i.e. this code cannot simply be
- * copied and put under another distribution licence
- * [including the GNU Public Licence.]
- */
-
-#include <openssl/e_os2.h>
-
-#ifdef OPENSSL_BUILD_SHLIBCRYPTO
-# undef OPENSSL_EXTERN
-# define OPENSSL_EXTERN OPENSSL_EXPORT
-#endif
-
-/* The following macros make sure the names are different from libdes names */
-#define DES_version OSSL_DES_version
-#define libdes_version OSSL_libdes_version
-
-OPENSSL_EXTERN const char OSSL_DES_version[];	/* SSLeay version string */
-OPENSSL_EXTERN const char OSSL_libdes_version[];	/* old libdes version string */
diff --git a/crypto/openssl/crypto/des/dess.cpp b/crypto/openssl/crypto/des/dess.cpp
deleted file mode 100644
index 5549bab90afb..000000000000
--- a/crypto/openssl/crypto/des/dess.cpp
+++ /dev/null
@@ -1,67 +0,0 @@
-//
-// gettsc.inl
-//
-// gives access to the Pentium's (secret) cycle counter
-//
-// This software was written by Leonard Janke (janke@unixg.ubc.ca)
-// in 1996-7 and is entered, by him, into the public domain.
-
-#if defined(__WATCOMC__)
-void GetTSC(unsigned long&);
-#pragma aux GetTSC = 0x0f 0x31 "mov [edi], eax" parm [edi] modify [edx eax];
-#elif defined(__GNUC__)
-inline
-void GetTSC(unsigned long& tsc)
-{
-  asm volatile(".byte 15, 49\n\t"
-	       : "=eax" (tsc)
-	       :
-	       : "%edx", "%eax");
-}
-#elif defined(_MSC_VER)
-inline
-void GetTSC(unsigned long& tsc)
-{
-  unsigned long a;
-  __asm _emit 0fh
-  __asm _emit 31h
-  __asm mov a, eax;
-  tsc=a;
-}
-#endif      
-
-#include <stdio.h>
-#include <stdlib.h>
-#include <openssl/des.h>
-
-void main(int argc,char *argv[])
-	{
-	des_key_schedule key;
-	unsigned long s1,s2,e1,e2;
-	unsigned long data[2];
-	int i,j;
-
-	for (j=0; j<6; j++)
-		{
-		for (i=0; i<1000; i++) /**/
-			{
-			des_encrypt1(&data[0],key,1);
-			GetTSC(s1);
-			des_encrypt1(&data[0],key,1);
-			des_encrypt1(&data[0],key,1);
-			des_encrypt1(&data[0],key,1);
-			GetTSC(e1);
-			GetTSC(s2);
-			des_encrypt1(&data[0],key,1);
-			des_encrypt1(&data[0],key,1);
-			des_encrypt1(&data[0],key,1);
-			des_encrypt1(&data[0],key,1);
-			GetTSC(e2);
-			des_encrypt1(&data[0],key,1);
-			}
-
-		printf("des %d %d (%d)\n",
-			e1-s1,e2-s2,((e2-s2)-(e1-s1)));
-		}
-	}
-
diff --git a/crypto/openssl/crypto/des/destest.c b/crypto/openssl/crypto/des/destest.c
deleted file mode 100644
index 64b92a34fe97..000000000000
--- a/crypto/openssl/crypto/des/destest.c
+++ /dev/null
@@ -1,952 +0,0 @@
-/* crypto/des/destest.c */
-/* Copyright (C) 1995-1998 Eric Young (eay@cryptsoft.com)
- * All rights reserved.
- *
- * This package is an SSL implementation written
- * by Eric Young (eay@cryptsoft.com).
- * The implementation was written so as to conform with Netscapes SSL.
- * 
- * This library is free for commercial and non-commercial use as long as
- * the following conditions are aheared to.  The following conditions
- * apply to all code found in this distribution, be it the RC4, RSA,
- * lhash, DES, etc., code; not just the SSL code.  The SSL documentation
- * included with this distribution is covered by the same copyright terms
- * except that the holder is Tim Hudson (tjh@cryptsoft.com).
- * 
- * Copyright remains Eric Young's, and as such any Copyright notices in
- * the code are not to be removed.
- * If this package is used in a product, Eric Young should be given attribution
- * as the author of the parts of the library used.
- * This can be in the form of a textual message at program startup or
- * in documentation (online or textual) provided with the package.
- * 
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions
- * are met:
- * 1. Redistributions of source code must retain the copyright
- *    notice, this list of conditions and the following disclaimer.
- * 2. Redistributions in binary form must reproduce the above copyright
- *    notice, this list of conditions and the following disclaimer in the
- *    documentation and/or other materials provided with the distribution.
- * 3. All advertising materials mentioning features or use of this software
- *    must display the following acknowledgement:
- *    "This product includes cryptographic software written by
- *     Eric Young (eay@cryptsoft.com)"
- *    The word 'cryptographic' can be left out if the rouines from the library
- *    being used are not cryptographic related :-).
- * 4. If you include any Windows specific code (or a derivative thereof) from 
- *    the apps directory (application code) you must include an acknowledgement:
- *    "This product includes software written by Tim Hudson (tjh@cryptsoft.com)"
- * 
- * THIS SOFTWARE IS PROVIDED BY ERIC YOUNG ``AS IS'' AND
- * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
- * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
- * ARE DISCLAIMED.  IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE
- * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
- * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
- * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
- * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
- * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
- * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
- * SUCH DAMAGE.
- * 
- * The licence and distribution terms for any publically available version or
- * derivative of this code cannot be changed.  i.e. this code cannot simply be
- * copied and put under another distribution licence
- * [including the GNU Public Licence.]
- */
-
-#include <stdio.h>
-#include <stdlib.h>
-
-#include <openssl/e_os2.h>
-#if defined(OPENSSL_SYS_WIN32) || defined(OPENSSL_SYS_WIN16) || defined(OPENSSL_SYS_WINDOWS)
-#ifndef OPENSSL_SYS_MSDOS
-#define OPENSSL_SYS_MSDOS
-#endif
-#endif
-
-#ifndef OPENSSL_SYS_MSDOS
-#if !defined(OPENSSL_SYS_VMS) || defined(OPENSSL_SYS_VMS_DECC)
-#include OPENSSL_UNISTD
-#endif
-#else
-#include <io.h>
-#endif
-#include <string.h>
-
-#ifdef OPENSSL_NO_DES
-int main(int argc, char *argv[])
-{
-    printf("No DES support\n");
-    return(0);
-}
-#else
-#include <openssl/des.h>
-
-#define crypt(c,s) (DES_crypt((c),(s)))
-
-/* tisk tisk - the test keys don't all have odd parity :-( */
-/* test data */
-#define NUM_TESTS 34
-static unsigned char key_data[NUM_TESTS][8]={
-	{0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00},
-	{0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF},
-	{0x30,0x00,0x00,0x00,0x00,0x00,0x00,0x00},
-	{0x11,0x11,0x11,0x11,0x11,0x11,0x11,0x11},
-	{0x01,0x23,0x45,0x67,0x89,0xAB,0xCD,0xEF},
-	{0x11,0x11,0x11,0x11,0x11,0x11,0x11,0x11},
-	{0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00},
-	{0xFE,0xDC,0xBA,0x98,0x76,0x54,0x32,0x10},
-	{0x7C,0xA1,0x10,0x45,0x4A,0x1A,0x6E,0x57},
-	{0x01,0x31,0xD9,0x61,0x9D,0xC1,0x37,0x6E},
-	{0x07,0xA1,0x13,0x3E,0x4A,0x0B,0x26,0x86},
-	{0x38,0x49,0x67,0x4C,0x26,0x02,0x31,0x9E},
-	{0x04,0xB9,0x15,0xBA,0x43,0xFE,0xB5,0xB6},
-	{0x01,0x13,0xB9,0x70,0xFD,0x34,0xF2,0xCE},
-	{0x01,0x70,0xF1,0x75,0x46,0x8F,0xB5,0xE6},
-	{0x43,0x29,0x7F,0xAD,0x38,0xE3,0x73,0xFE},
-	{0x07,0xA7,0x13,0x70,0x45,0xDA,0x2A,0x16},
-	{0x04,0x68,0x91,0x04,0xC2,0xFD,0x3B,0x2F},
-	{0x37,0xD0,0x6B,0xB5,0x16,0xCB,0x75,0x46},
-	{0x1F,0x08,0x26,0x0D,0x1A,0xC2,0x46,0x5E},
-	{0x58,0x40,0x23,0x64,0x1A,0xBA,0x61,0x76},
-	{0x02,0x58,0x16,0x16,0x46,0x29,0xB0,0x07},
-	{0x49,0x79,0x3E,0xBC,0x79,0xB3,0x25,0x8F},
-	{0x4F,0xB0,0x5E,0x15,0x15,0xAB,0x73,0xA7},
-	{0x49,0xE9,0x5D,0x6D,0x4C,0xA2,0x29,0xBF},
-	{0x01,0x83,0x10,0xDC,0x40,0x9B,0x26,0xD6},
-	{0x1C,0x58,0x7F,0x1C,0x13,0x92,0x4F,0xEF},
-	{0x01,0x01,0x01,0x01,0x01,0x01,0x01,0x01},
-	{0x1F,0x1F,0x1F,0x1F,0x0E,0x0E,0x0E,0x0E},
-	{0xE0,0xFE,0xE0,0xFE,0xF1,0xFE,0xF1,0xFE},
-	{0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00},
-	{0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF},
-	{0x01,0x23,0x45,0x67,0x89,0xAB,0xCD,0xEF},
-	{0xFE,0xDC,0xBA,0x98,0x76,0x54,0x32,0x10}};
-
-static unsigned char plain_data[NUM_TESTS][8]={
-	{0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00},
-	{0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF},
-	{0x10,0x00,0x00,0x00,0x00,0x00,0x00,0x01},
-	{0x11,0x11,0x11,0x11,0x11,0x11,0x11,0x11},
-	{0x11,0x11,0x11,0x11,0x11,0x11,0x11,0x11},
-	{0x01,0x23,0x45,0x67,0x89,0xAB,0xCD,0xEF},
-	{0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00},
-	{0x01,0x23,0x45,0x67,0x89,0xAB,0xCD,0xEF},
-	{0x01,0xA1,0xD6,0xD0,0x39,0x77,0x67,0x42},
-	{0x5C,0xD5,0x4C,0xA8,0x3D,0xEF,0x57,0xDA},
-	{0x02,0x48,0xD4,0x38,0x06,0xF6,0x71,0x72},
-	{0x51,0x45,0x4B,0x58,0x2D,0xDF,0x44,0x0A},
-	{0x42,0xFD,0x44,0x30,0x59,0x57,0x7F,0xA2},
-	{0x05,0x9B,0x5E,0x08,0x51,0xCF,0x14,0x3A},
-	{0x07,0x56,0xD8,0xE0,0x77,0x47,0x61,0xD2},
-	{0x76,0x25,0x14,0xB8,0x29,0xBF,0x48,0x6A},
-	{0x3B,0xDD,0x11,0x90,0x49,0x37,0x28,0x02},
-	{0x26,0x95,0x5F,0x68,0x35,0xAF,0x60,0x9A},
-	{0x16,0x4D,0x5E,0x40,0x4F,0x27,0x52,0x32},
-	{0x6B,0x05,0x6E,0x18,0x75,0x9F,0x5C,0xCA},
-	{0x00,0x4B,0xD6,0xEF,0x09,0x17,0x60,0x62},
-	{0x48,0x0D,0x39,0x00,0x6E,0xE7,0x62,0xF2},
-	{0x43,0x75,0x40,0xC8,0x69,0x8F,0x3C,0xFA},
-	{0x07,0x2D,0x43,0xA0,0x77,0x07,0x52,0x92},
-	{0x02,0xFE,0x55,0x77,0x81,0x17,0xF1,0x2A},
-	{0x1D,0x9D,0x5C,0x50,0x18,0xF7,0x28,0xC2},
-	{0x30,0x55,0x32,0x28,0x6D,0x6F,0x29,0x5A},
-	{0x01,0x23,0x45,0x67,0x89,0xAB,0xCD,0xEF},
-	{0x01,0x23,0x45,0x67,0x89,0xAB,0xCD,0xEF},
-	{0x01,0x23,0x45,0x67,0x89,0xAB,0xCD,0xEF},
-	{0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF},
-	{0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00},
-	{0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00},
-	{0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF}};
-
-static unsigned char cipher_data[NUM_TESTS][8]={
-	{0x8C,0xA6,0x4D,0xE9,0xC1,0xB1,0x23,0xA7},
-	{0x73,0x59,0xB2,0x16,0x3E,0x4E,0xDC,0x58},
-	{0x95,0x8E,0x6E,0x62,0x7A,0x05,0x55,0x7B},
-	{0xF4,0x03,0x79,0xAB,0x9E,0x0E,0xC5,0x33},
-	{0x17,0x66,0x8D,0xFC,0x72,0x92,0x53,0x2D},
-	{0x8A,0x5A,0xE1,0xF8,0x1A,0xB8,0xF2,0xDD},
-	{0x8C,0xA6,0x4D,0xE9,0xC1,0xB1,0x23,0xA7},
-	{0xED,0x39,0xD9,0x50,0xFA,0x74,0xBC,0xC4},
-	{0x69,0x0F,0x5B,0x0D,0x9A,0x26,0x93,0x9B},
-	{0x7A,0x38,0x9D,0x10,0x35,0x4B,0xD2,0x71},
-	{0x86,0x8E,0xBB,0x51,0xCA,0xB4,0x59,0x9A},
-	{0x71,0x78,0x87,0x6E,0x01,0xF1,0x9B,0x2A},
-	{0xAF,0x37,0xFB,0x42,0x1F,0x8C,0x40,0x95},
-	{0x86,0xA5,0x60,0xF1,0x0E,0xC6,0xD8,0x5B},
-	{0x0C,0xD3,0xDA,0x02,0x00,0x21,0xDC,0x09},
-	{0xEA,0x67,0x6B,0x2C,0xB7,0xDB,0x2B,0x7A},
-	{0xDF,0xD6,0x4A,0x81,0x5C,0xAF,0x1A,0x0F},
-	{0x5C,0x51,0x3C,0x9C,0x48,0x86,0xC0,0x88},
-	{0x0A,0x2A,0xEE,0xAE,0x3F,0xF4,0xAB,0x77},
-	{0xEF,0x1B,0xF0,0x3E,0x5D,0xFA,0x57,0x5A},
-	{0x88,0xBF,0x0D,0xB6,0xD7,0x0D,0xEE,0x56},
-	{0xA1,0xF9,0x91,0x55,0x41,0x02,0x0B,0x56},
-	{0x6F,0xBF,0x1C,0xAF,0xCF,0xFD,0x05,0x56},
-	{0x2F,0x22,0xE4,0x9B,0xAB,0x7C,0xA1,0xAC},
-	{0x5A,0x6B,0x61,0x2C,0xC2,0x6C,0xCE,0x4A},
-	{0x5F,0x4C,0x03,0x8E,0xD1,0x2B,0x2E,0x41},
-	{0x63,0xFA,0xC0,0xD0,0x34,0xD9,0xF7,0x93},
-	{0x61,0x7B,0x3A,0x0C,0xE8,0xF0,0x71,0x00},
-	{0xDB,0x95,0x86,0x05,0xF8,0xC8,0xC6,0x06},
-	{0xED,0xBF,0xD1,0xC6,0x6C,0x29,0xCC,0xC7},
-	{0x35,0x55,0x50,0xB2,0x15,0x0E,0x24,0x51},
-	{0xCA,0xAA,0xAF,0x4D,0xEA,0xF1,0xDB,0xAE},
-	{0xD5,0xD4,0x4F,0xF7,0x20,0x68,0x3D,0x0D},
-	{0x2A,0x2B,0xB0,0x08,0xDF,0x97,0xC2,0xF2}};
-
-static unsigned char cipher_ecb2[NUM_TESTS-1][8]={
-	{0x92,0x95,0xB5,0x9B,0xB3,0x84,0x73,0x6E},
-	{0x19,0x9E,0x9D,0x6D,0xF3,0x9A,0xA8,0x16},
-	{0x2A,0x4B,0x4D,0x24,0x52,0x43,0x84,0x27},
-	{0x35,0x84,0x3C,0x01,0x9D,0x18,0xC5,0xB6},
-	{0x4A,0x5B,0x2F,0x42,0xAA,0x77,0x19,0x25},
-	{0xA0,0x6B,0xA9,0xB8,0xCA,0x5B,0x17,0x8A},
-	{0xAB,0x9D,0xB7,0xFB,0xED,0x95,0xF2,0x74},
-	{0x3D,0x25,0x6C,0x23,0xA7,0x25,0x2F,0xD6},
-	{0xB7,0x6F,0xAB,0x4F,0xBD,0xBD,0xB7,0x67},
-	{0x8F,0x68,0x27,0xD6,0x9C,0xF4,0x1A,0x10},
-	{0x82,0x57,0xA1,0xD6,0x50,0x5E,0x81,0x85},
-	{0xA2,0x0F,0x0A,0xCD,0x80,0x89,0x7D,0xFA},
-	{0xCD,0x2A,0x53,0x3A,0xDB,0x0D,0x7E,0xF3},
-	{0xD2,0xC2,0xBE,0x27,0xE8,0x1B,0x68,0xE3},
-	{0xE9,0x24,0xCF,0x4F,0x89,0x3C,0x5B,0x0A},
-	{0xA7,0x18,0xC3,0x9F,0xFA,0x9F,0xD7,0x69},
-	{0x77,0x2C,0x79,0xB1,0xD2,0x31,0x7E,0xB1},
-	{0x49,0xAB,0x92,0x7F,0xD0,0x22,0x00,0xB7},
-	{0xCE,0x1C,0x6C,0x7D,0x85,0xE3,0x4A,0x6F},
-	{0xBE,0x91,0xD6,0xE1,0x27,0xB2,0xE9,0x87},
-	{0x70,0x28,0xAE,0x8F,0xD1,0xF5,0x74,0x1A},
-	{0xAA,0x37,0x80,0xBB,0xF3,0x22,0x1D,0xDE},
-	{0xA6,0xC4,0xD2,0x5E,0x28,0x93,0xAC,0xB3},
-	{0x22,0x07,0x81,0x5A,0xE4,0xB7,0x1A,0xAD},
-	{0xDC,0xCE,0x05,0xE7,0x07,0xBD,0xF5,0x84},
-	{0x26,0x1D,0x39,0x2C,0xB3,0xBA,0xA5,0x85},
-	{0xB4,0xF7,0x0F,0x72,0xFB,0x04,0xF0,0xDC},
-	{0x95,0xBA,0xA9,0x4E,0x87,0x36,0xF2,0x89},
-	{0xD4,0x07,0x3A,0xF1,0x5A,0x17,0x82,0x0E},
-	{0xEF,0x6F,0xAF,0xA7,0x66,0x1A,0x7E,0x89},
-	{0xC1,0x97,0xF5,0x58,0x74,0x8A,0x20,0xE7},
-	{0x43,0x34,0xCF,0xDA,0x22,0xC4,0x86,0xC8},
-	{0x08,0xD7,0xB4,0xFB,0x62,0x9D,0x08,0x85}};
-
-static unsigned char cbc_key [8]={0x01,0x23,0x45,0x67,0x89,0xab,0xcd,0xef};
-static unsigned char cbc2_key[8]={0xf1,0xe0,0xd3,0xc2,0xb5,0xa4,0x97,0x86};
-static unsigned char cbc3_key[8]={0xfe,0xdc,0xba,0x98,0x76,0x54,0x32,0x10};
-static unsigned char cbc_iv  [8]={0xfe,0xdc,0xba,0x98,0x76,0x54,0x32,0x10};
-/* Changed the following text constant to binary so it will work on ebcdic
- * machines :-) */
-/* static char cbc_data[40]="7654321 Now is the time for \0001"; */
-static unsigned char cbc_data[40]={
-	0x37,0x36,0x35,0x34,0x33,0x32,0x31,0x20,
-	0x4E,0x6F,0x77,0x20,0x69,0x73,0x20,0x74,
-	0x68,0x65,0x20,0x74,0x69,0x6D,0x65,0x20,
-	0x66,0x6F,0x72,0x20,0x00,0x31,0x00,0x00,
-	0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
-	};
-
-static unsigned char cbc_ok[32]={
-	0xcc,0xd1,0x73,0xff,0xab,0x20,0x39,0xf4,
-	0xac,0xd8,0xae,0xfd,0xdf,0xd8,0xa1,0xeb,
-	0x46,0x8e,0x91,0x15,0x78,0x88,0xba,0x68,
-	0x1d,0x26,0x93,0x97,0xf7,0xfe,0x62,0xb4};
-
-#ifdef SCREW_THE_PARITY
-#error "SCREW_THE_PARITY is not ment to be defined."
-#error "Original vectors are preserved for reference only."
-static unsigned char cbc2_key[8]={0xf0,0xe1,0xd2,0xc3,0xb4,0xa5,0x96,0x87};
-static unsigned char xcbc_ok[32]={
-	0x86,0x74,0x81,0x0D,0x61,0xA4,0xA5,0x48,
-	0xB9,0x93,0x03,0xE1,0xB8,0xBB,0xBD,0xBD,
-	0x64,0x30,0x0B,0xB9,0x06,0x65,0x81,0x76,
-	0x04,0x1D,0x77,0x62,0x17,0xCA,0x2B,0xD2,
-	};
-#else
-static unsigned char xcbc_ok[32]={
-	0x84,0x6B,0x29,0x14,0x85,0x1E,0x9A,0x29,
-	0x54,0x73,0x2F,0x8A,0xA0,0xA6,0x11,0xC1,
-	0x15,0xCD,0xC2,0xD7,0x95,0x1B,0x10,0x53,
-	0xA6,0x3C,0x5E,0x03,0xB2,0x1A,0xA3,0xC4,
-	};
-#endif
-
-static unsigned char cbc3_ok[32]={
-	0x3F,0xE3,0x01,0xC9,0x62,0xAC,0x01,0xD0,
-	0x22,0x13,0x76,0x3C,0x1C,0xBD,0x4C,0xDC,
-	0x79,0x96,0x57,0xC0,0x64,0xEC,0xF5,0xD4,
-	0x1C,0x67,0x38,0x12,0xCF,0xDE,0x96,0x75};
-
-static unsigned char pcbc_ok[32]={
-	0xcc,0xd1,0x73,0xff,0xab,0x20,0x39,0xf4,
-	0x6d,0xec,0xb4,0x70,0xa0,0xe5,0x6b,0x15,
-	0xae,0xa6,0xbf,0x61,0xed,0x7d,0x9c,0x9f,
-	0xf7,0x17,0x46,0x3b,0x8a,0xb3,0xcc,0x88};
-
-static unsigned char cfb_key[8]={0x01,0x23,0x45,0x67,0x89,0xab,0xcd,0xef};
-static unsigned char cfb_iv[8]={0x12,0x34,0x56,0x78,0x90,0xab,0xcd,0xef};
-static unsigned char cfb_buf1[40],cfb_buf2[40],cfb_tmp[8];
-static unsigned char plain[24]=
-	{
-	0x4e,0x6f,0x77,0x20,0x69,0x73,
-	0x20,0x74,0x68,0x65,0x20,0x74,
-	0x69,0x6d,0x65,0x20,0x66,0x6f,
-	0x72,0x20,0x61,0x6c,0x6c,0x20
-	};
-static unsigned char cfb_cipher8[24]= {
-	0xf3,0x1f,0xda,0x07,0x01,0x14, 0x62,0xee,0x18,0x7f,0x43,0xd8,
-	0x0a,0x7c,0xd9,0xb5,0xb0,0xd2, 0x90,0xda,0x6e,0x5b,0x9a,0x87 };
-static unsigned char cfb_cipher16[24]={
-	0xF3,0x09,0x87,0x87,0x7F,0x57, 0xF7,0x3C,0x36,0xB6,0xDB,0x70,
-	0xD8,0xD5,0x34,0x19,0xD3,0x86, 0xB2,0x23,0xB7,0xB2,0xAD,0x1B };
-static unsigned char cfb_cipher32[24]={
-	0xF3,0x09,0x62,0x49,0xA4,0xDF, 0xA4,0x9F,0x33,0xDC,0x7B,0xAD,
-	0x4C,0xC8,0x9F,0x64,0xE4,0x53, 0xE5,0xEC,0x67,0x20,0xDA,0xB6 };
-static unsigned char cfb_cipher48[24]={
-	0xF3,0x09,0x62,0x49,0xC7,0xF4, 0x30,0xB5,0x15,0xEC,0xBB,0x85,
-	0x97,0x5A,0x13,0x8C,0x68,0x60, 0xE2,0x38,0x34,0x3C,0xDC,0x1F };
-static unsigned char cfb_cipher64[24]={
-	0xF3,0x09,0x62,0x49,0xC7,0xF4, 0x6E,0x51,0xA6,0x9E,0x83,0x9B,
-	0x1A,0x92,0xF7,0x84,0x03,0x46, 0x71,0x33,0x89,0x8E,0xA6,0x22 };
-
-static unsigned char ofb_key[8]={0x01,0x23,0x45,0x67,0x89,0xab,0xcd,0xef};
-static unsigned char ofb_iv[8]={0x12,0x34,0x56,0x78,0x90,0xab,0xcd,0xef};
-static unsigned char ofb_buf1[24],ofb_buf2[24],ofb_tmp[8];
-static unsigned char ofb_cipher[24]=
-	{
-	0xf3,0x09,0x62,0x49,0xc7,0xf4,0x6e,0x51,
-	0x35,0xf2,0x4a,0x24,0x2e,0xeb,0x3d,0x3f,
-	0x3d,0x6d,0x5b,0xe3,0x25,0x5a,0xf8,0xc3
-	};
-
-#if 0
-static DES_LONG cbc_cksum_ret=0xB462FEF7L;
-#else
-static DES_LONG cbc_cksum_ret=0xF7FE62B4L;
-#endif
-static unsigned char cbc_cksum_data[8]={0x1D,0x26,0x93,0x97,0xf7,0xfe,0x62,0xb4};
-
-static char *pt(unsigned char *p);
-static int cfb_test(int bits, unsigned char *cfb_cipher);
-static int cfb64_test(unsigned char *cfb_cipher);
-static int ede_cfb64_test(unsigned char *cfb_cipher);
-int main(int argc, char *argv[])
-	{
-	int j,err=0;
-	unsigned int i;
-	des_cblock in,out,outin,iv3,iv2;
-	des_key_schedule ks,ks2,ks3;
-	unsigned char cbc_in[40];
-	unsigned char cbc_out[40];
-	DES_LONG cs;
-	unsigned char cret[8];
-#ifdef _CRAY
-        struct {
-            int a:32;
-            int b:32;
-        } lqret[2];
-#else
-        DES_LONG lqret[4];
-#endif
-	int num;
-	char *str;
-
-#ifndef OPENSSL_NO_DESCBCM
-	printf("Doing cbcm\n");
-	if ((j=DES_set_key_checked(&cbc_key,&ks)) != 0)
-		{
-		printf("Key error %d\n",j);
-		err=1;
-		}
-	if ((j=DES_set_key_checked(&cbc2_key,&ks2)) != 0)
-		{
-		printf("Key error %d\n",j);
-		err=1;
-		}
-	if ((j=DES_set_key_checked(&cbc3_key,&ks3)) != 0)
-		{
-		printf("Key error %d\n",j);
-		err=1;
-		}
-	memset(cbc_out,0,40);
-	memset(cbc_in,0,40);
-	i=strlen((char *)cbc_data)+1;
-	/* i=((i+7)/8)*8; */
-	memcpy(iv3,cbc_iv,sizeof(cbc_iv));
-	memset(iv2,'\0',sizeof iv2);
-
-	DES_ede3_cbcm_encrypt(cbc_data,cbc_out,16L,&ks,&ks2,&ks3,&iv3,&iv2,
-			      DES_ENCRYPT);
-	DES_ede3_cbcm_encrypt(&cbc_data[16],&cbc_out[16],i-16,&ks,&ks2,&ks3,
-			      &iv3,&iv2,DES_ENCRYPT);
-	/*	if (memcmp(cbc_out,cbc3_ok,
-		(unsigned int)(strlen((char *)cbc_data)+1+7)/8*8) != 0)
-		{
-		printf("des_ede3_cbc_encrypt encrypt error\n");
-		err=1;
-		}
-	*/
-	memcpy(iv3,cbc_iv,sizeof(cbc_iv));
-	memset(iv2,'\0',sizeof iv2);
-	DES_ede3_cbcm_encrypt(cbc_out,cbc_in,i,&ks,&ks2,&ks3,&iv3,&iv2,DES_DECRYPT);
-	if (memcmp(cbc_in,cbc_data,strlen((char *)cbc_data)+1) != 0)
-		{
-		unsigned int n;
-
-		printf("des_ede3_cbcm_encrypt decrypt error\n");
-		for(n=0 ; n < i ; ++n)
-		    printf(" %02x",cbc_data[n]);
-		printf("\n");
-		for(n=0 ; n < i ; ++n)
-		    printf(" %02x",cbc_in[n]);
-		printf("\n");
-		err=1;
-		}
-#endif
-
-	printf("Doing ecb\n");
-	for (i=0; i<NUM_TESTS; i++)
-		{
-		DES_set_key_unchecked(&key_data[i],&ks);
-		memcpy(in,plain_data[i],8);
-		memset(out,0,8);
-		memset(outin,0,8);
-		des_ecb_encrypt(&in,&out,ks,DES_ENCRYPT);
-		des_ecb_encrypt(&out,&outin,ks,DES_DECRYPT);
-
-		if (memcmp(out,cipher_data[i],8) != 0)
-			{
-			printf("Encryption error %2d\nk=%s p=%s o=%s act=%s\n",
-				i+1,pt(key_data[i]),pt(in),pt(cipher_data[i]),
-				pt(out));
-			err=1;
-			}
-		if (memcmp(in,outin,8) != 0)
-			{
-			printf("Decryption error %2d\nk=%s p=%s o=%s act=%s\n",
-				i+1,pt(key_data[i]),pt(out),pt(in),pt(outin));
-			err=1;
-			}
-		}
-
-#ifndef LIBDES_LIT
-	printf("Doing ede ecb\n");
-	for (i=0; i<(NUM_TESTS-2); i++)
-		{
-		DES_set_key_unchecked(&key_data[i],&ks);
-		DES_set_key_unchecked(&key_data[i+1],&ks2);
-		DES_set_key_unchecked(&key_data[i+2],&ks3);
-		memcpy(in,plain_data[i],8);
-		memset(out,0,8);
-		memset(outin,0,8);
-		des_ecb2_encrypt(&in,&out,ks,ks2,DES_ENCRYPT);
-		des_ecb2_encrypt(&out,&outin,ks,ks2,DES_DECRYPT);
-
-		if (memcmp(out,cipher_ecb2[i],8) != 0)
-			{
-			printf("Encryption error %2d\nk=%s p=%s o=%s act=%s\n",
-				i+1,pt(key_data[i]),pt(in),pt(cipher_ecb2[i]),
-				pt(out));
-			err=1;
-			}
-		if (memcmp(in,outin,8) != 0)
-			{
-			printf("Decryption error %2d\nk=%s p=%s o=%s act=%s\n",
-				i+1,pt(key_data[i]),pt(out),pt(in),pt(outin));
-			err=1;
-			}
-		}
-#endif
-
-	printf("Doing cbc\n");
-	if ((j=DES_set_key_checked(&cbc_key,&ks)) != 0)
-		{
-		printf("Key error %d\n",j);
-		err=1;
-		}
-	memset(cbc_out,0,40);
-	memset(cbc_in,0,40);
-	memcpy(iv3,cbc_iv,sizeof(cbc_iv));
-	des_ncbc_encrypt(cbc_data,cbc_out,strlen((char *)cbc_data)+1,ks,
-			 &iv3,DES_ENCRYPT);
-	if (memcmp(cbc_out,cbc_ok,32) != 0)
-		{
-		printf("cbc_encrypt encrypt error\n");
-		err=1;
-		}
-
-	memcpy(iv3,cbc_iv,sizeof(cbc_iv));
-	des_ncbc_encrypt(cbc_out,cbc_in,strlen((char *)cbc_data)+1,ks,
-			 &iv3,DES_DECRYPT);
-	if (memcmp(cbc_in,cbc_data,strlen((char *)cbc_data)) != 0)
-		{
-		printf("cbc_encrypt decrypt error\n");
-		err=1;
-		}
-
-#ifndef LIBDES_LIT
-	printf("Doing desx cbc\n");
-	if ((j=DES_set_key_checked(&cbc_key,&ks)) != 0)
-		{
-		printf("Key error %d\n",j);
-		err=1;
-		}
-	memset(cbc_out,0,40);
-	memset(cbc_in,0,40);
-	memcpy(iv3,cbc_iv,sizeof(cbc_iv));
-	des_xcbc_encrypt(cbc_data,cbc_out,strlen((char *)cbc_data)+1,ks,
-			 &iv3,&cbc2_key,&cbc3_key, DES_ENCRYPT);
-	if (memcmp(cbc_out,xcbc_ok,32) != 0)
-		{
-		printf("des_xcbc_encrypt encrypt error\n");
-		err=1;
-		}
-	memcpy(iv3,cbc_iv,sizeof(cbc_iv));
-	des_xcbc_encrypt(cbc_out,cbc_in,strlen((char *)cbc_data)+1,ks,
-			 &iv3,&cbc2_key,&cbc3_key, DES_DECRYPT);
-	if (memcmp(cbc_in,cbc_data,strlen((char *)cbc_data)+1) != 0)
-		{
-		printf("des_xcbc_encrypt decrypt error\n");
-		err=1;
-		}
-#endif
-
-	printf("Doing ede cbc\n");
-	if ((j=DES_set_key_checked(&cbc_key,&ks)) != 0)
-		{
-		printf("Key error %d\n",j);
-		err=1;
-		}
-	if ((j=DES_set_key_checked(&cbc2_key,&ks2)) != 0)
-		{
-		printf("Key error %d\n",j);
-		err=1;
-		}
-	if ((j=DES_set_key_checked(&cbc3_key,&ks3)) != 0)
-		{
-		printf("Key error %d\n",j);
-		err=1;
-		}
-	memset(cbc_out,0,40);
-	memset(cbc_in,0,40);
-	i=strlen((char *)cbc_data)+1;
-	/* i=((i+7)/8)*8; */
-	memcpy(iv3,cbc_iv,sizeof(cbc_iv));
-
-	des_ede3_cbc_encrypt(cbc_data,cbc_out,16L,ks,ks2,ks3,&iv3,
-			     DES_ENCRYPT);
-	des_ede3_cbc_encrypt(&(cbc_data[16]),&(cbc_out[16]),i-16,ks,ks2,ks3,
-			     &iv3,DES_ENCRYPT);
-	if (memcmp(cbc_out,cbc3_ok,
-		(unsigned int)(strlen((char *)cbc_data)+1+7)/8*8) != 0)
-		{
-		unsigned int n;
-
-		printf("des_ede3_cbc_encrypt encrypt error\n");
-		for(n=0 ; n < i ; ++n)
-		    printf(" %02x",cbc_out[n]);
-		printf("\n");
-		for(n=0 ; n < i ; ++n)
-		    printf(" %02x",cbc3_ok[n]);
-		printf("\n");
-		err=1;
-		}
-
-	memcpy(iv3,cbc_iv,sizeof(cbc_iv));
-	des_ede3_cbc_encrypt(cbc_out,cbc_in,i,ks,ks2,ks3,&iv3,DES_DECRYPT);
-	if (memcmp(cbc_in,cbc_data,strlen((char *)cbc_data)+1) != 0)
-		{
-		unsigned int n;
-
-		printf("des_ede3_cbc_encrypt decrypt error\n");
-		for(n=0 ; n < i ; ++n)
-		    printf(" %02x",cbc_data[n]);
-		printf("\n");
-		for(n=0 ; n < i ; ++n)
-		    printf(" %02x",cbc_in[n]);
-		printf("\n");
-		err=1;
-		}
-
-#ifndef LIBDES_LIT
-	printf("Doing pcbc\n");
-	if ((j=DES_set_key_checked(&cbc_key,&ks)) != 0)
-		{
-		printf("Key error %d\n",j);
-		err=1;
-		}
-	memset(cbc_out,0,40);
-	memset(cbc_in,0,40);
-	des_pcbc_encrypt(cbc_data,cbc_out,strlen((char *)cbc_data)+1,ks,
-			 &cbc_iv,DES_ENCRYPT);
-	if (memcmp(cbc_out,pcbc_ok,32) != 0)
-		{
-		printf("pcbc_encrypt encrypt error\n");
-		err=1;
-		}
-	des_pcbc_encrypt(cbc_out,cbc_in,strlen((char *)cbc_data)+1,ks,&cbc_iv,
-			 DES_DECRYPT);
-	if (memcmp(cbc_in,cbc_data,strlen((char *)cbc_data)+1) != 0)
-		{
-		printf("pcbc_encrypt decrypt error\n");
-		err=1;
-		}
-
-	printf("Doing ");
-	printf("cfb8 ");
-	err+=cfb_test(8,cfb_cipher8);
-	printf("cfb16 ");
-	err+=cfb_test(16,cfb_cipher16);
-	printf("cfb32 ");
-	err+=cfb_test(32,cfb_cipher32);
-	printf("cfb48 ");
-	err+=cfb_test(48,cfb_cipher48);
-	printf("cfb64 ");
-	err+=cfb_test(64,cfb_cipher64);
-
-	printf("cfb64() ");
-	err+=cfb64_test(cfb_cipher64);
-
-	memcpy(cfb_tmp,cfb_iv,sizeof(cfb_iv));
-	for (i=0; i<sizeof(plain); i++)
-		des_cfb_encrypt(&(plain[i]),&(cfb_buf1[i]),
-			8,1,ks,&cfb_tmp,DES_ENCRYPT);
-	if (memcmp(cfb_cipher8,cfb_buf1,sizeof(plain)) != 0)
-		{
-		printf("cfb_encrypt small encrypt error\n");
-		err=1;
-		}
-
-	memcpy(cfb_tmp,cfb_iv,sizeof(cfb_iv));
-	for (i=0; i<sizeof(plain); i++)
-		des_cfb_encrypt(&(cfb_buf1[i]),&(cfb_buf2[i]),
-			8,1,ks,&cfb_tmp,DES_DECRYPT);
-	if (memcmp(plain,cfb_buf2,sizeof(plain)) != 0)
-		{
-		printf("cfb_encrypt small decrypt error\n");
-		err=1;
-		}
-
-	printf("ede_cfb64() ");
-	err+=ede_cfb64_test(cfb_cipher64);
-
-	printf("done\n");
-
-	printf("Doing ofb\n");
-	DES_set_key_checked(&ofb_key,&ks);
-	memcpy(ofb_tmp,ofb_iv,sizeof(ofb_iv));
-	des_ofb_encrypt(plain,ofb_buf1,64,sizeof(plain)/8,ks,&ofb_tmp);
-	if (memcmp(ofb_cipher,ofb_buf1,sizeof(ofb_buf1)) != 0)
-		{
-		printf("ofb_encrypt encrypt error\n");
-printf("%02X %02X %02X %02X %02X %02X %02X %02X\n",
-ofb_buf1[8+0], ofb_buf1[8+1], ofb_buf1[8+2], ofb_buf1[8+3],
-ofb_buf1[8+4], ofb_buf1[8+5], ofb_buf1[8+6], ofb_buf1[8+7]);
-printf("%02X %02X %02X %02X %02X %02X %02X %02X\n",
-ofb_buf1[8+0], ofb_cipher[8+1], ofb_cipher[8+2], ofb_cipher[8+3],
-ofb_buf1[8+4], ofb_cipher[8+5], ofb_cipher[8+6], ofb_cipher[8+7]);
-		err=1;
-		}
-	memcpy(ofb_tmp,ofb_iv,sizeof(ofb_iv));
-	des_ofb_encrypt(ofb_buf1,ofb_buf2,64,sizeof(ofb_buf1)/8,ks,&ofb_tmp);
-	if (memcmp(plain,ofb_buf2,sizeof(ofb_buf2)) != 0)
-		{
-		printf("ofb_encrypt decrypt error\n");
-printf("%02X %02X %02X %02X %02X %02X %02X %02X\n",
-ofb_buf2[8+0], ofb_buf2[8+1], ofb_buf2[8+2], ofb_buf2[8+3],
-ofb_buf2[8+4], ofb_buf2[8+5], ofb_buf2[8+6], ofb_buf2[8+7]);
-printf("%02X %02X %02X %02X %02X %02X %02X %02X\n",
-plain[8+0], plain[8+1], plain[8+2], plain[8+3],
-plain[8+4], plain[8+5], plain[8+6], plain[8+7]);
-		err=1;
-		}
-
-	printf("Doing ofb64\n");
-	DES_set_key_checked(&ofb_key,&ks);
-	memcpy(ofb_tmp,ofb_iv,sizeof(ofb_iv));
-	memset(ofb_buf1,0,sizeof(ofb_buf1));
-	memset(ofb_buf2,0,sizeof(ofb_buf1));
-	num=0;
-	for (i=0; i<sizeof(plain); i++)
-		{
-		des_ofb64_encrypt(&(plain[i]),&(ofb_buf1[i]),1,ks,&ofb_tmp,
-				  &num);
-		}
-	if (memcmp(ofb_cipher,ofb_buf1,sizeof(ofb_buf1)) != 0)
-		{
-		printf("ofb64_encrypt encrypt error\n");
-		err=1;
-		}
-	memcpy(ofb_tmp,ofb_iv,sizeof(ofb_iv));
-	num=0;
-	des_ofb64_encrypt(ofb_buf1,ofb_buf2,sizeof(ofb_buf1),ks,&ofb_tmp,
-			  &num);
-	if (memcmp(plain,ofb_buf2,sizeof(ofb_buf2)) != 0)
-		{
-		printf("ofb64_encrypt decrypt error\n");
-		err=1;
-		}
-
-	printf("Doing ede_ofb64\n");
-	DES_set_key_checked(&ofb_key,&ks);
-	memcpy(ofb_tmp,ofb_iv,sizeof(ofb_iv));
-	memset(ofb_buf1,0,sizeof(ofb_buf1));
-	memset(ofb_buf2,0,sizeof(ofb_buf1));
-	num=0;
-	for (i=0; i<sizeof(plain); i++)
-		{
-		des_ede3_ofb64_encrypt(&(plain[i]),&(ofb_buf1[i]),1,ks,ks,
-				       ks,&ofb_tmp,&num);
-		}
-	if (memcmp(ofb_cipher,ofb_buf1,sizeof(ofb_buf1)) != 0)
-		{
-		printf("ede_ofb64_encrypt encrypt error\n");
-		err=1;
-		}
-	memcpy(ofb_tmp,ofb_iv,sizeof(ofb_iv));
-	num=0;
-	des_ede3_ofb64_encrypt(ofb_buf1,ofb_buf2,sizeof(ofb_buf1),ks,ks,ks,
-			       &ofb_tmp,&num);
-	if (memcmp(plain,ofb_buf2,sizeof(ofb_buf2)) != 0)
-		{
-		printf("ede_ofb64_encrypt decrypt error\n");
-		err=1;
-		}
-
-	printf("Doing cbc_cksum\n");
-	DES_set_key_checked(&cbc_key,&ks);
-	cs=des_cbc_cksum(cbc_data,&cret,strlen((char *)cbc_data),ks,&cbc_iv);
-	if (cs != cbc_cksum_ret)
-		{
-		printf("bad return value (%08lX), should be %08lX\n",
-			(unsigned long)cs,(unsigned long)cbc_cksum_ret);
-		err=1;
-		}
-	if (memcmp(cret,cbc_cksum_data,8) != 0)
-		{
-		printf("bad cbc_cksum block returned\n");
-		err=1;
-		}
-
-	printf("Doing quad_cksum\n");
-	cs=des_quad_cksum(cbc_data,(des_cblock *)lqret,
-		(long)strlen((char *)cbc_data),2,(des_cblock *)cbc_iv);
-	if (cs != 0x70d7a63aL)
-		{
-		printf("quad_cksum error, ret %08lx should be 70d7a63a\n",
-			(unsigned long)cs);
-		err=1;
-		}
-#ifdef _CRAY
-	if (lqret[0].a != 0x327eba8dL)
-		{
-		printf("quad_cksum error, out[0] %08lx is not %08lx\n",
-			(unsigned long)lqret[0].a,0x327eba8dUL);
-		err=1;
-		}
-	if (lqret[0].b != 0x201a49ccL)
-		{
-		printf("quad_cksum error, out[1] %08lx is not %08lx\n",
-			(unsigned long)lqret[0].b,0x201a49ccUL);
-		err=1;
-		}
-	if (lqret[1].a != 0x70d7a63aL)
-		{
-		printf("quad_cksum error, out[2] %08lx is not %08lx\n",
-			(unsigned long)lqret[1].a,0x70d7a63aUL);
-		err=1;
-		}
-	if (lqret[1].b != 0x501c2c26L)
-		{
-		printf("quad_cksum error, out[3] %08lx is not %08lx\n",
-			(unsigned long)lqret[1].b,0x501c2c26UL);
-		err=1;
-		}
-#else
-	if (lqret[0] != 0x327eba8dL)
-		{
-		printf("quad_cksum error, out[0] %08lx is not %08lx\n",
-			(unsigned long)lqret[0],0x327eba8dUL);
-		err=1;
-		}
-	if (lqret[1] != 0x201a49ccL)
-		{
-		printf("quad_cksum error, out[1] %08lx is not %08lx\n",
-			(unsigned long)lqret[1],0x201a49ccUL);
-		err=1;
-		}
-	if (lqret[2] != 0x70d7a63aL)
-		{
-		printf("quad_cksum error, out[2] %08lx is not %08lx\n",
-			(unsigned long)lqret[2],0x70d7a63aUL);
-		err=1;
-		}
-	if (lqret[3] != 0x501c2c26L)
-		{
-		printf("quad_cksum error, out[3] %08lx is not %08lx\n",
-			(unsigned long)lqret[3],0x501c2c26UL);
-		err=1;
-		}
-#endif
-#endif
-
-	printf("input word alignment test");
-	for (i=0; i<4; i++)
-		{
-		printf(" %d",i);
-		des_ncbc_encrypt(&(cbc_out[i]),cbc_in,
-				 strlen((char *)cbc_data)+1,ks,
-				 &cbc_iv,DES_ENCRYPT);
-		}
-	printf("\noutput word alignment test");
-	for (i=0; i<4; i++)
-		{
-		printf(" %d",i);
-		des_ncbc_encrypt(cbc_out,&(cbc_in[i]),
-				 strlen((char *)cbc_data)+1,ks,
-				 &cbc_iv,DES_ENCRYPT);
-		}
-	printf("\n");
-	printf("fast crypt test ");
-	str=crypt("testing","ef");
-	if (strcmp("efGnQx2725bI2",str) != 0)
-		{
-		printf("fast crypt error, %s should be efGnQx2725bI2\n",str);
-		err=1;
-		}
-	str=crypt("bca76;23","yA");
-	if (strcmp("yA1Rp/1hZXIJk",str) != 0)
-		{
-		printf("fast crypt error, %s should be yA1Rp/1hZXIJk\n",str);
-		err=1;
-		}
-#ifdef OPENSSL_SYS_NETWARE
-    if (err) printf("ERROR: %d\n", err);
-#endif
-	printf("\n");
-	return(err);
-	}
-
-static char *pt(unsigned char *p)
-	{
-	static char bufs[10][20];
-	static int bnum=0;
-	char *ret;
-	int i;
-	static char *f="0123456789ABCDEF";
-
-	ret= &(bufs[bnum++][0]);
-	bnum%=10;
-	for (i=0; i<8; i++)
-		{
-		ret[i*2]=f[(p[i]>>4)&0xf];
-		ret[i*2+1]=f[p[i]&0xf];
-		}
-	ret[16]='\0';
-	return(ret);
-	}
-
-#ifndef LIBDES_LIT
-
-static int cfb_test(int bits, unsigned char *cfb_cipher)
-	{
-	des_key_schedule ks;
-	int i,err=0;
-
-	DES_set_key_checked(&cfb_key,&ks);
-	memcpy(cfb_tmp,cfb_iv,sizeof(cfb_iv));
-	des_cfb_encrypt(plain,cfb_buf1,bits,sizeof(plain),ks,&cfb_tmp,
-			DES_ENCRYPT);
-	if (memcmp(cfb_cipher,cfb_buf1,sizeof(plain)) != 0)
-		{
-		err=1;
-		printf("cfb_encrypt encrypt error\n");
-		for (i=0; i<24; i+=8)
-			printf("%s\n",pt(&(cfb_buf1[i])));
-		}
-	memcpy(cfb_tmp,cfb_iv,sizeof(cfb_iv));
-	des_cfb_encrypt(cfb_buf1,cfb_buf2,bits,sizeof(plain),ks,&cfb_tmp,
-			DES_DECRYPT);
-	if (memcmp(plain,cfb_buf2,sizeof(plain)) != 0)
-		{
-		err=1;
-		printf("cfb_encrypt decrypt error\n");
-		for (i=0; i<24; i+=8)
-			printf("%s\n",pt(&(cfb_buf1[i])));
-		}
-	return(err);
-	}
-
-static int cfb64_test(unsigned char *cfb_cipher)
-	{
-	des_key_schedule ks;
-	int err=0,i,n;
-
-	DES_set_key_checked(&cfb_key,&ks);
-	memcpy(cfb_tmp,cfb_iv,sizeof(cfb_iv));
-	n=0;
-	des_cfb64_encrypt(plain,cfb_buf1,12,ks,&cfb_tmp,&n,DES_ENCRYPT);
-	des_cfb64_encrypt(&(plain[12]),&(cfb_buf1[12]),sizeof(plain)-12,ks,
-			  &cfb_tmp,&n,DES_ENCRYPT);
-	if (memcmp(cfb_cipher,cfb_buf1,sizeof(plain)) != 0)
-		{
-		err=1;
-		printf("cfb_encrypt encrypt error\n");
-		for (i=0; i<24; i+=8)
-			printf("%s\n",pt(&(cfb_buf1[i])));
-		}
-	memcpy(cfb_tmp,cfb_iv,sizeof(cfb_iv));
-	n=0;
-	des_cfb64_encrypt(cfb_buf1,cfb_buf2,17,ks,&cfb_tmp,&n,DES_DECRYPT);
-	des_cfb64_encrypt(&(cfb_buf1[17]),&(cfb_buf2[17]),
-			  sizeof(plain)-17,ks,&cfb_tmp,&n,DES_DECRYPT);
-	if (memcmp(plain,cfb_buf2,sizeof(plain)) != 0)
-		{
-		err=1;
-		printf("cfb_encrypt decrypt error\n");
-		for (i=0; i<24; i+=8)
-			printf("%s\n",pt(&(cfb_buf2[i])));
-		}
-	return(err);
-	}
-
-static int ede_cfb64_test(unsigned char *cfb_cipher)
-	{
-	des_key_schedule ks;
-	int err=0,i,n;
-
-	DES_set_key_checked(&cfb_key,&ks);
-	memcpy(cfb_tmp,cfb_iv,sizeof(cfb_iv));
-	n=0;
-	des_ede3_cfb64_encrypt(plain,cfb_buf1,12,ks,ks,ks,&cfb_tmp,&n,
-			       DES_ENCRYPT);
-	des_ede3_cfb64_encrypt(&(plain[12]),&(cfb_buf1[12]),
-			       sizeof(plain)-12,ks,ks,ks,
-			       &cfb_tmp,&n,DES_ENCRYPT);
-	if (memcmp(cfb_cipher,cfb_buf1,sizeof(plain)) != 0)
-		{
-		err=1;
-		printf("ede_cfb_encrypt encrypt error\n");
-		for (i=0; i<24; i+=8)
-			printf("%s\n",pt(&(cfb_buf1[i])));
-		}
-	memcpy(cfb_tmp,cfb_iv,sizeof(cfb_iv));
-	n=0;
-	des_ede3_cfb64_encrypt(cfb_buf1,cfb_buf2,(long)17,ks,ks,ks,
-			       &cfb_tmp,&n,DES_DECRYPT);
-	des_ede3_cfb64_encrypt(&(cfb_buf1[17]),&(cfb_buf2[17]),
-			       sizeof(plain)-17,ks,ks,ks,
-			       &cfb_tmp,&n,DES_DECRYPT);
-	if (memcmp(plain,cfb_buf2,sizeof(plain)) != 0)
-		{
-		err=1;
-		printf("ede_cfb_encrypt decrypt error\n");
-		for (i=0; i<24; i+=8)
-			printf("%s\n",pt(&(cfb_buf2[i])));
-		}
-	return(err);
-	}
-
-#endif
-#endif
diff --git a/crypto/openssl/crypto/des/ecb3_enc.c b/crypto/openssl/crypto/des/ecb3_enc.c
deleted file mode 100644
index c3437bc60621..000000000000
--- a/crypto/openssl/crypto/des/ecb3_enc.c
+++ /dev/null
@@ -1,83 +0,0 @@
-/* crypto/des/ecb3_enc.c */
-/* Copyright (C) 1995-1998 Eric Young (eay@cryptsoft.com)
- * All rights reserved.
- *
- * This package is an SSL implementation written
- * by Eric Young (eay@cryptsoft.com).
- * The implementation was written so as to conform with Netscapes SSL.
- * 
- * This library is free for commercial and non-commercial use as long as
- * the following conditions are aheared to.  The following conditions
- * apply to all code found in this distribution, be it the RC4, RSA,
- * lhash, DES, etc., code; not just the SSL code.  The SSL documentation
- * included with this distribution is covered by the same copyright terms
- * except that the holder is Tim Hudson (tjh@cryptsoft.com).
- * 
- * Copyright remains Eric Young's, and as such any Copyright notices in
- * the code are not to be removed.
- * If this package is used in a product, Eric Young should be given attribution
- * as the author of the parts of the library used.
- * This can be in the form of a textual message at program startup or
- * in documentation (online or textual) provided with the package.
- * 
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions
- * are met:
- * 1. Redistributions of source code must retain the copyright
- *    notice, this list of conditions and the following disclaimer.
- * 2. Redistributions in binary form must reproduce the above copyright
- *    notice, this list of conditions and the following disclaimer in the
- *    documentation and/or other materials provided with the distribution.
- * 3. All advertising materials mentioning features or use of this software
- *    must display the following acknowledgement:
- *    "This product includes cryptographic software written by
- *     Eric Young (eay@cryptsoft.com)"
- *    The word 'cryptographic' can be left out if the rouines from the library
- *    being used are not cryptographic related :-).
- * 4. If you include any Windows specific code (or a derivative thereof) from 
- *    the apps directory (application code) you must include an acknowledgement:
- *    "This product includes software written by Tim Hudson (tjh@cryptsoft.com)"
- * 
- * THIS SOFTWARE IS PROVIDED BY ERIC YOUNG ``AS IS'' AND
- * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
- * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
- * ARE DISCLAIMED.  IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE
- * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
- * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
- * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
- * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
- * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
- * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
- * SUCH DAMAGE.
- * 
- * The licence and distribution terms for any publically available version or
- * derivative of this code cannot be changed.  i.e. this code cannot simply be
- * copied and put under another distribution licence
- * [including the GNU Public Licence.]
- */
-
-#include "des_locl.h"
-
-void DES_ecb3_encrypt(const_DES_cblock *input, DES_cblock *output,
-		      DES_key_schedule *ks1, DES_key_schedule *ks2,
-		      DES_key_schedule *ks3,
-	     int enc)
-	{
-	register DES_LONG l0,l1;
-	DES_LONG ll[2];
-	const unsigned char *in = &(*input)[0];
-	unsigned char *out = &(*output)[0];
-
-	c2l(in,l0);
-	c2l(in,l1);
-	ll[0]=l0;
-	ll[1]=l1;
-	if (enc)
-		DES_encrypt3(ll,ks1,ks2,ks3);
-	else
-		DES_decrypt3(ll,ks1,ks2,ks3);
-	l0=ll[0];
-	l1=ll[1];
-	l2c(l0,out);
-	l2c(l1,out);
-	}
diff --git a/crypto/openssl/crypto/des/ecb_enc.c b/crypto/openssl/crypto/des/ecb_enc.c
deleted file mode 100644
index 00d5b91e8ca5..000000000000
--- a/crypto/openssl/crypto/des/ecb_enc.c
+++ /dev/null
@@ -1,123 +0,0 @@
-/* crypto/des/ecb_enc.c */
-/* Copyright (C) 1995-1998 Eric Young (eay@cryptsoft.com)
- * All rights reserved.
- *
- * This package is an SSL implementation written
- * by Eric Young (eay@cryptsoft.com).
- * The implementation was written so as to conform with Netscapes SSL.
- * 
- * This library is free for commercial and non-commercial use as long as
- * the following conditions are aheared to.  The following conditions
- * apply to all code found in this distribution, be it the RC4, RSA,
- * lhash, DES, etc., code; not just the SSL code.  The SSL documentation
- * included with this distribution is covered by the same copyright terms
- * except that the holder is Tim Hudson (tjh@cryptsoft.com).
- * 
- * Copyright remains Eric Young's, and as such any Copyright notices in
- * the code are not to be removed.
- * If this package is used in a product, Eric Young should be given attribution
- * as the author of the parts of the library used.
- * This can be in the form of a textual message at program startup or
- * in documentation (online or textual) provided with the package.
- * 
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions
- * are met:
- * 1. Redistributions of source code must retain the copyright
- *    notice, this list of conditions and the following disclaimer.
- * 2. Redistributions in binary form must reproduce the above copyright
- *    notice, this list of conditions and the following disclaimer in the
- *    documentation and/or other materials provided with the distribution.
- * 3. All advertising materials mentioning features or use of this software
- *    must display the following acknowledgement:
- *    "This product includes cryptographic software written by
- *     Eric Young (eay@cryptsoft.com)"
- *    The word 'cryptographic' can be left out if the rouines from the library
- *    being used are not cryptographic related :-).
- * 4. If you include any Windows specific code (or a derivative thereof) from 
- *    the apps directory (application code) you must include an acknowledgement:
- *    "This product includes software written by Tim Hudson (tjh@cryptsoft.com)"
- * 
- * THIS SOFTWARE IS PROVIDED BY ERIC YOUNG ``AS IS'' AND
- * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
- * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
- * ARE DISCLAIMED.  IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE
- * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
- * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
- * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
- * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
- * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
- * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
- * SUCH DAMAGE.
- * 
- * The licence and distribution terms for any publically available version or
- * derivative of this code cannot be changed.  i.e. this code cannot simply be
- * copied and put under another distribution licence
- * [including the GNU Public Licence.]
- */
-
-#include "des_locl.h"
-#include "des_ver.h"
-#include "spr.h"
-#include <openssl/opensslv.h>
-#include <openssl/bio.h>
-
-OPENSSL_GLOBAL const char libdes_version[]="libdes" OPENSSL_VERSION_PTEXT;
-OPENSSL_GLOBAL const char DES_version[]="DES" OPENSSL_VERSION_PTEXT;
-
-const char *DES_options(void)
-	{
-	static int init=1;
-	static char buf[32];
-
-	if (init)
-		{
-		const char *ptr,*unroll,*risc,*size;
-
-#ifdef DES_PTR
-		ptr="ptr";
-#else
-		ptr="idx";
-#endif
-#if defined(DES_RISC1) || defined(DES_RISC2)
-#ifdef DES_RISC1
-		risc="risc1";
-#endif
-#ifdef DES_RISC2
-		risc="risc2";
-#endif
-#else
-		risc="cisc";
-#endif
-#ifdef DES_UNROLL
-		unroll="16";
-#else
-		unroll="4";
-#endif
-		if (sizeof(DES_LONG) != sizeof(long))
-			size="int";
-		else
-			size="long";
-		BIO_snprintf(buf,sizeof buf,"des(%s,%s,%s,%s)",ptr,risc,unroll,
-			     size);
-		init=0;
-		}
-	return(buf);
-	}
-		
-
-void DES_ecb_encrypt(const_DES_cblock *input, DES_cblock *output,
-		     DES_key_schedule *ks, int enc)
-	{
-	register DES_LONG l;
-	DES_LONG ll[2];
-	const unsigned char *in = &(*input)[0];
-	unsigned char *out = &(*output)[0];
-
-	c2l(in,l); ll[0]=l;
-	c2l(in,l); ll[1]=l;
-	DES_encrypt1(ll,ks,enc);
-	l=ll[0]; l2c(l,out);
-	l=ll[1]; l2c(l,out);
-	l=ll[0]=ll[1]=0;
-	}
diff --git a/crypto/openssl/crypto/des/ede_cbcm_enc.c b/crypto/openssl/crypto/des/ede_cbcm_enc.c
deleted file mode 100644
index adfcb75cf387..000000000000
--- a/crypto/openssl/crypto/des/ede_cbcm_enc.c
+++ /dev/null
@@ -1,199 +0,0 @@
-/* ede_cbcm_enc.c */
-/* Written by Ben Laurie <ben@algroup.co.uk> for the OpenSSL
- * project 13 Feb 1999.
- */
-/* ====================================================================
- * Copyright (c) 1999 The OpenSSL Project.  All rights reserved.
- *
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions
- * are met:
- *
- * 1. Redistributions of source code must retain the above copyright
- *    notice, this list of conditions and the following disclaimer. 
- *
- * 2. Redistributions in binary form must reproduce the above copyright
- *    notice, this list of conditions and the following disclaimer in
- *    the documentation and/or other materials provided with the
- *    distribution.
- *
- * 3. All advertising materials mentioning features or use of this
- *    software must display the following acknowledgment:
- *    "This product includes software developed by the OpenSSL Project
- *    for use in the OpenSSL Toolkit. (http://www.OpenSSL.org/)"
- *
- * 4. The names "OpenSSL Toolkit" and "OpenSSL Project" must not be used to
- *    endorse or promote products derived from this software without
- *    prior written permission. For written permission, please contact
- *    licensing@OpenSSL.org.
- *
- * 5. Products derived from this software may not be called "OpenSSL"
- *    nor may "OpenSSL" appear in their names without prior written
- *    permission of the OpenSSL Project.
- *
- * 6. Redistributions of any form whatsoever must retain the following
- *    acknowledgment:
- *    "This product includes software developed by the OpenSSL Project
- *    for use in the OpenSSL Toolkit (http://www.OpenSSL.org/)"
- *
- * THIS SOFTWARE IS PROVIDED BY THE OpenSSL PROJECT ``AS IS'' AND ANY
- * EXPRESSED OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
- * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR
- * PURPOSE ARE DISCLAIMED.  IN NO EVENT SHALL THE OpenSSL PROJECT OR
- * ITS CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
- * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
- * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
- * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
- * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
- * STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
- * ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED
- * OF THE POSSIBILITY OF SUCH DAMAGE.
- * ====================================================================
- *
- * This product includes cryptographic software written by Eric Young
- * (eay@cryptsoft.com).  This product includes software written by Tim
- * Hudson (tjh@cryptsoft.com).
- *
- */
-
-/*
-
-This is an implementation of Triple DES Cipher Block Chaining with Output
-Feedback Masking, by Coppersmith, Johnson and Matyas, (IBM and Certicom).
-
-Note that there is a known attack on this by Biham and Knudsen but it takes
-a lot of work:
-
-http://www.cs.technion.ac.il/users/wwwb/cgi-bin/tr-get.cgi/1998/CS/CS0928.ps.gz
-
-*/
-
-#include <openssl/opensslconf.h> /* To see if OPENSSL_NO_DESCBCM is defined */
-
-#ifndef OPENSSL_NO_DESCBCM
-#include "des_locl.h"
-
-void DES_ede3_cbcm_encrypt(const unsigned char *in, unsigned char *out,
-	     long length, DES_key_schedule *ks1, DES_key_schedule *ks2,
-	     DES_key_schedule *ks3, DES_cblock *ivec1, DES_cblock *ivec2,
-	     int enc)
-    {
-    register DES_LONG tin0,tin1;
-    register DES_LONG tout0,tout1,xor0,xor1,m0,m1;
-    register long l=length;
-    DES_LONG tin[2];
-    unsigned char *iv1,*iv2;
-
-    iv1 = &(*ivec1)[0];
-    iv2 = &(*ivec2)[0];
-
-    if (enc)
-	{
-	c2l(iv1,m0);
-	c2l(iv1,m1);
-	c2l(iv2,tout0);
-	c2l(iv2,tout1);
-	for (l-=8; l>=-7; l-=8)
-	    {
-	    tin[0]=m0;
-	    tin[1]=m1;
-	    DES_encrypt1(tin,ks3,1);
-	    m0=tin[0];
-	    m1=tin[1];
-
-	    if(l < 0)
-		{
-		c2ln(in,tin0,tin1,l+8);
-		}
-	    else
-		{
-		c2l(in,tin0);
-		c2l(in,tin1);
-		}
-	    tin0^=tout0;
-	    tin1^=tout1;
-
-	    tin[0]=tin0;
-	    tin[1]=tin1;
-	    DES_encrypt1(tin,ks1,1);
-	    tin[0]^=m0;
-	    tin[1]^=m1;
-	    DES_encrypt1(tin,ks2,0);
-	    tin[0]^=m0;
-	    tin[1]^=m1;
-	    DES_encrypt1(tin,ks1,1);
-	    tout0=tin[0];
-	    tout1=tin[1];
-
-	    l2c(tout0,out);
-	    l2c(tout1,out);
-	    }
-	iv1=&(*ivec1)[0];
-	l2c(m0,iv1);
-	l2c(m1,iv1);
-
-	iv2=&(*ivec2)[0];
-	l2c(tout0,iv2);
-	l2c(tout1,iv2);
-	}
-    else
-	{
-	register DES_LONG t0,t1;
-
-	c2l(iv1,m0);
-	c2l(iv1,m1);
-	c2l(iv2,xor0);
-	c2l(iv2,xor1);
-	for (l-=8; l>=-7; l-=8)
-	    {
-	    tin[0]=m0;
-	    tin[1]=m1;
-	    DES_encrypt1(tin,ks3,1);
-	    m0=tin[0];
-	    m1=tin[1];
-
-	    c2l(in,tin0);
-	    c2l(in,tin1);
-
-	    t0=tin0;
-	    t1=tin1;
-
-	    tin[0]=tin0;
-	    tin[1]=tin1;
-	    DES_encrypt1(tin,ks1,0);
-	    tin[0]^=m0;
-	    tin[1]^=m1;
-	    DES_encrypt1(tin,ks2,1);
-	    tin[0]^=m0;
-	    tin[1]^=m1;
-	    DES_encrypt1(tin,ks1,0);
-	    tout0=tin[0];
-	    tout1=tin[1];
-
-	    tout0^=xor0;
-	    tout1^=xor1;
-	    if(l < 0)
-		{
-		l2cn(tout0,tout1,out,l+8);
-		}
-	    else
-		{
-		l2c(tout0,out);
-		l2c(tout1,out);
-		}
-	    xor0=t0;
-	    xor1=t1;
-	    }
-
-	iv1=&(*ivec1)[0];
-	l2c(m0,iv1);
-	l2c(m1,iv1);
-
-	iv2=&(*ivec2)[0];
-	l2c(xor0,iv2);
-	l2c(xor1,iv2);
-	}
-    tin0=tin1=tout0=tout1=xor0=xor1=0;
-    tin[0]=tin[1]=0;
-    }
-#endif
diff --git a/crypto/openssl/crypto/des/enc_read.c b/crypto/openssl/crypto/des/enc_read.c
deleted file mode 100644
index c70fb686b8b0..000000000000
--- a/crypto/openssl/crypto/des/enc_read.c
+++ /dev/null
@@ -1,228 +0,0 @@
-/* crypto/des/enc_read.c */
-/* Copyright (C) 1995-1998 Eric Young (eay@cryptsoft.com)
- * All rights reserved.
- *
- * This package is an SSL implementation written
- * by Eric Young (eay@cryptsoft.com).
- * The implementation was written so as to conform with Netscapes SSL.
- * 
- * This library is free for commercial and non-commercial use as long as
- * the following conditions are aheared to.  The following conditions
- * apply to all code found in this distribution, be it the RC4, RSA,
- * lhash, DES, etc., code; not just the SSL code.  The SSL documentation
- * included with this distribution is covered by the same copyright terms
- * except that the holder is Tim Hudson (tjh@cryptsoft.com).
- * 
- * Copyright remains Eric Young's, and as such any Copyright notices in
- * the code are not to be removed.
- * If this package is used in a product, Eric Young should be given attribution
- * as the author of the parts of the library used.
- * This can be in the form of a textual message at program startup or
- * in documentation (online or textual) provided with the package.
- * 
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions
- * are met:
- * 1. Redistributions of source code must retain the copyright
- *    notice, this list of conditions and the following disclaimer.
- * 2. Redistributions in binary form must reproduce the above copyright
- *    notice, this list of conditions and the following disclaimer in the
- *    documentation and/or other materials provided with the distribution.
- * 3. All advertising materials mentioning features or use of this software
- *    must display the following acknowledgement:
- *    "This product includes cryptographic software written by
- *     Eric Young (eay@cryptsoft.com)"
- *    The word 'cryptographic' can be left out if the rouines from the library
- *    being used are not cryptographic related :-).
- * 4. If you include any Windows specific code (or a derivative thereof) from 
- *    the apps directory (application code) you must include an acknowledgement:
- *    "This product includes software written by Tim Hudson (tjh@cryptsoft.com)"
- * 
- * THIS SOFTWARE IS PROVIDED BY ERIC YOUNG ``AS IS'' AND
- * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
- * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
- * ARE DISCLAIMED.  IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE
- * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
- * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
- * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
- * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
- * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
- * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
- * SUCH DAMAGE.
- * 
- * The licence and distribution terms for any publically available version or
- * derivative of this code cannot be changed.  i.e. this code cannot simply be
- * copied and put under another distribution licence
- * [including the GNU Public Licence.]
- */
-
-#include <stdio.h>
-#include <errno.h>
-#include "cryptlib.h"
-#include "des_locl.h"
-
-/* This has some uglies in it but it works - even over sockets. */
-/*extern int errno;*/
-OPENSSL_IMPLEMENT_GLOBAL(int,DES_rw_mode)=DES_PCBC_MODE;
-
-
-/*
- * WARNINGS:
- *
- *  -  The data format used by DES_enc_write() and DES_enc_read()
- *     has a cryptographic weakness: When asked to write more
- *     than MAXWRITE bytes, DES_enc_write will split the data
- *     into several chunks that are all encrypted
- *     using the same IV.  So don't use these functions unless you
- *     are sure you know what you do (in which case you might
- *     not want to use them anyway).
- *
- *  -  This code cannot handle non-blocking sockets.
- *
- *  -  This function uses an internal state and thus cannot be
- *     used on multiple files.
- */
-
-
-int DES_enc_read(int fd, void *buf, int len, DES_key_schedule *sched,
-		 DES_cblock *iv)
-	{
-	/* data to be unencrypted */
-	int net_num=0;
-	static unsigned char *net=NULL;
-	/* extra unencrypted data 
-	 * for when a block of 100 comes in but is des_read one byte at
-	 * a time. */
-	static unsigned char *unnet=NULL;
-	static int unnet_start=0;
-	static int unnet_left=0;
-	static unsigned char *tmpbuf=NULL;
-	int i;
-	long num=0,rnum;
-	unsigned char *p;
-
-	if (tmpbuf == NULL)
-		{
-		tmpbuf=OPENSSL_malloc(BSIZE);
-		if (tmpbuf == NULL) return(-1);
-		}
-	if (net == NULL)
-		{
-		net=OPENSSL_malloc(BSIZE);
-		if (net == NULL) return(-1);
-		}
-	if (unnet == NULL)
-		{
-		unnet=OPENSSL_malloc(BSIZE);
-		if (unnet == NULL) return(-1);
-		}
-	/* left over data from last decrypt */
-	if (unnet_left != 0)
-		{
-		if (unnet_left < len)
-			{
-			/* we still still need more data but will return
-			 * with the number of bytes we have - should always
-			 * check the return value */
-			memcpy(buf,&(unnet[unnet_start]),
-			       unnet_left);
-			/* eay 26/08/92 I had the next 2 lines
-			 * reversed :-( */
-			i=unnet_left;
-			unnet_start=unnet_left=0;
-			}
-		else
-			{
-			memcpy(buf,&(unnet[unnet_start]),len);
-			unnet_start+=len;
-			unnet_left-=len;
-			i=len;
-			}
-		return(i);
-		}
-
-	/* We need to get more data. */
-	if (len > MAXWRITE) len=MAXWRITE;
-
-	/* first - get the length */
-	while (net_num < HDRSIZE) 
-		{
-		i=read(fd,(void *)&(net[net_num]),HDRSIZE-net_num);
-#ifdef EINTR
-		if ((i == -1) && (errno == EINTR)) continue;
-#endif
-		if (i <= 0) return(0);
-		net_num+=i;
-		}
-
-	/* we now have at net_num bytes in net */
-	p=net;
-	/* num=0;  */
-	n2l(p,num);
-	/* num should be rounded up to the next group of eight
-	 * we make sure that we have read a multiple of 8 bytes from the net.
-	 */
-	if ((num > MAXWRITE) || (num < 0)) /* error */
-		return(-1);
-	rnum=(num < 8)?8:((num+7)/8*8);
-
-	net_num=0;
-	while (net_num < rnum)
-		{
-		i=read(fd,(void *)&(net[net_num]),rnum-net_num);
-#ifdef EINTR
-		if ((i == -1) && (errno == EINTR)) continue;
-#endif
-		if (i <= 0) return(0);
-		net_num+=i;
-		}
-
-	/* Check if there will be data left over. */
-	if (len < num)
-		{
-		if (DES_rw_mode & DES_PCBC_MODE)
-			DES_pcbc_encrypt(net,unnet,num,sched,iv,DES_DECRYPT);
-		else
-			DES_cbc_encrypt(net,unnet,num,sched,iv,DES_DECRYPT);
-		memcpy(buf,unnet,len);
-		unnet_start=len;
-		unnet_left=num-len;
-
-		/* The following line is done because we return num
-		 * as the number of bytes read. */
-		num=len;
-		}
-	else
-		{
-		/* >output is a multiple of 8 byes, if len < rnum
-		 * >we must be careful.  The user must be aware that this
-		 * >routine will write more bytes than he asked for.
-		 * >The length of the buffer must be correct.
-		 * FIXED - Should be ok now 18-9-90 - eay */
-		if (len < rnum)
-			{
-
-			if (DES_rw_mode & DES_PCBC_MODE)
-				DES_pcbc_encrypt(net,tmpbuf,num,sched,iv,
-						 DES_DECRYPT);
-			else
-				DES_cbc_encrypt(net,tmpbuf,num,sched,iv,
-						DES_DECRYPT);
-
-			/* eay 26/08/92 fix a bug that returned more
-			 * bytes than you asked for (returned len bytes :-( */
-			memcpy(buf,tmpbuf,num);
-			}
-		else
-			{
-			if (DES_rw_mode & DES_PCBC_MODE)
-				DES_pcbc_encrypt(net,buf,num,sched,iv,
-						 DES_DECRYPT);
-			else
-				DES_cbc_encrypt(net,buf,num,sched,iv,
-						DES_DECRYPT);
-			}
-		}
-	return num;
-	}
-
diff --git a/crypto/openssl/crypto/des/enc_writ.c b/crypto/openssl/crypto/des/enc_writ.c
deleted file mode 100644
index af5b8c2349bb..000000000000
--- a/crypto/openssl/crypto/des/enc_writ.c
+++ /dev/null
@@ -1,171 +0,0 @@
-/* crypto/des/enc_writ.c */
-/* Copyright (C) 1995-1998 Eric Young (eay@cryptsoft.com)
- * All rights reserved.
- *
- * This package is an SSL implementation written
- * by Eric Young (eay@cryptsoft.com).
- * The implementation was written so as to conform with Netscapes SSL.
- * 
- * This library is free for commercial and non-commercial use as long as
- * the following conditions are aheared to.  The following conditions
- * apply to all code found in this distribution, be it the RC4, RSA,
- * lhash, DES, etc., code; not just the SSL code.  The SSL documentation
- * included with this distribution is covered by the same copyright terms
- * except that the holder is Tim Hudson (tjh@cryptsoft.com).
- * 
- * Copyright remains Eric Young's, and as such any Copyright notices in
- * the code are not to be removed.
- * If this package is used in a product, Eric Young should be given attribution
- * as the author of the parts of the library used.
- * This can be in the form of a textual message at program startup or
- * in documentation (online or textual) provided with the package.
- * 
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions
- * are met:
- * 1. Redistributions of source code must retain the copyright
- *    notice, this list of conditions and the following disclaimer.
- * 2. Redistributions in binary form must reproduce the above copyright
- *    notice, this list of conditions and the following disclaimer in the
- *    documentation and/or other materials provided with the distribution.
- * 3. All advertising materials mentioning features or use of this software
- *    must display the following acknowledgement:
- *    "This product includes cryptographic software written by
- *     Eric Young (eay@cryptsoft.com)"
- *    The word 'cryptographic' can be left out if the rouines from the library
- *    being used are not cryptographic related :-).
- * 4. If you include any Windows specific code (or a derivative thereof) from 
- *    the apps directory (application code) you must include an acknowledgement:
- *    "This product includes software written by Tim Hudson (tjh@cryptsoft.com)"
- * 
- * THIS SOFTWARE IS PROVIDED BY ERIC YOUNG ``AS IS'' AND
- * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
- * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
- * ARE DISCLAIMED.  IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE
- * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
- * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
- * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
- * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
- * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
- * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
- * SUCH DAMAGE.
- * 
- * The licence and distribution terms for any publically available version or
- * derivative of this code cannot be changed.  i.e. this code cannot simply be
- * copied and put under another distribution licence
- * [including the GNU Public Licence.]
- */
-
-#include <errno.h>
-#include <time.h>
-#include <stdio.h>
-#include "cryptlib.h"
-#include "des_locl.h"
-#include <openssl/rand.h>
-
-/*
- * WARNINGS:
- *
- *  -  The data format used by DES_enc_write() and DES_enc_read()
- *     has a cryptographic weakness: When asked to write more
- *     than MAXWRITE bytes, DES_enc_write will split the data
- *     into several chunks that are all encrypted
- *     using the same IV.  So don't use these functions unless you
- *     are sure you know what you do (in which case you might
- *     not want to use them anyway).
- *
- *  -  This code cannot handle non-blocking sockets.
- */
-
-int DES_enc_write(int fd, const void *_buf, int len,
-		  DES_key_schedule *sched, DES_cblock *iv)
-	{
-#ifdef _LIBC
-	extern unsigned long time();
-	extern int write();
-#endif
-	const unsigned char *buf=_buf;
-	long rnum;
-	int i,j,k,outnum;
-	static unsigned char *outbuf=NULL;
-	unsigned char shortbuf[8];
-	unsigned char *p;
-	const unsigned char *cp;
-	static int start=1;
-
-	if (outbuf == NULL)
-		{
-		outbuf=OPENSSL_malloc(BSIZE+HDRSIZE);
-		if (outbuf == NULL) return(-1);
-		}
-	/* If we are sending less than 8 bytes, the same char will look
-	 * the same if we don't pad it out with random bytes */
-	if (start)
-		{
-		start=0;
-		}
-
-	/* lets recurse if we want to send the data in small chunks */
-	if (len > MAXWRITE)
-		{
-		j=0;
-		for (i=0; i<len; i+=k)
-			{
-			k=DES_enc_write(fd,&(buf[i]),
-				((len-i) > MAXWRITE)?MAXWRITE:(len-i),sched,iv);
-			if (k < 0)
-				return(k);
-			else
-				j+=k;
-			}
-		return(j);
-		}
-
-	/* write length first */
-	p=outbuf;
-	l2n(len,p);
-
-	/* pad short strings */
-	if (len < 8)
-		{
-		cp=shortbuf;
-		memcpy(shortbuf,buf,len);
-		RAND_pseudo_bytes(shortbuf+len, 8-len);
-		rnum=8;
-		}
-	else
-		{
-		cp=buf;
-		rnum=((len+7)/8*8); /* round up to nearest eight */
-		}
-
-	if (DES_rw_mode & DES_PCBC_MODE)
-		DES_pcbc_encrypt(cp,&(outbuf[HDRSIZE]),(len<8)?8:len,sched,iv,
-				 DES_ENCRYPT); 
-	else
-		DES_cbc_encrypt(cp,&(outbuf[HDRSIZE]),(len<8)?8:len,sched,iv,
-				DES_ENCRYPT); 
-
-	/* output */
-	outnum=rnum+HDRSIZE;
-
-	for (j=0; j<outnum; j+=i)
-		{
-		/* eay 26/08/92 I was not doing writing from where we
-		 * got up to. */
-		i=write(fd,(void *)&(outbuf[j]),outnum-j);
-		if (i == -1)
-			{
-#ifdef EINTR
-			if (errno == EINTR)
-				i=0;
-			else
-#endif
-			        /* This is really a bad error - very bad
-				 * It will stuff-up both ends. */
-				return(-1);
-			}
-		}
-
-	return(len);
-	}
diff --git a/crypto/openssl/crypto/des/fcrypt.c b/crypto/openssl/crypto/des/fcrypt.c
deleted file mode 100644
index ccbdff250f70..000000000000
--- a/crypto/openssl/crypto/des/fcrypt.c
+++ /dev/null
@@ -1,170 +0,0 @@
-/* NOCW */
-#include <stdio.h>
-#ifdef _OSD_POSIX
-#ifndef CHARSET_EBCDIC
-#define CHARSET_EBCDIC 1
-#endif
-#endif
-#ifdef CHARSET_EBCDIC
-#include <openssl/ebcdic.h>
-#endif
-
-/* This version of crypt has been developed from my MIT compatible
- * DES library.
- * Eric Young (eay@cryptsoft.com)
- */
-
-/* Modification by Jens Kupferschmidt (Cu)
- * I have included directive PARA for shared memory computers.
- * I have included a directive LONGCRYPT to using this routine to cipher
- * passwords with more then 8 bytes like HP-UX 10.x it used. The MAXPLEN
- * definition is the maximum of length of password and can changed. I have
- * defined 24.
- */
-
-#include "des_locl.h"
-
-/* Added more values to handle illegal salt values the way normal
- * crypt() implementations do.  The patch was sent by 
- * Bjorn Gronvall <bg@sics.se>
- */
-static unsigned const char con_salt[128]={
-0xD2,0xD3,0xD4,0xD5,0xD6,0xD7,0xD8,0xD9,
-0xDA,0xDB,0xDC,0xDD,0xDE,0xDF,0xE0,0xE1,
-0xE2,0xE3,0xE4,0xE5,0xE6,0xE7,0xE8,0xE9,
-0xEA,0xEB,0xEC,0xED,0xEE,0xEF,0xF0,0xF1,
-0xF2,0xF3,0xF4,0xF5,0xF6,0xF7,0xF8,0xF9,
-0xFA,0xFB,0xFC,0xFD,0xFE,0xFF,0x00,0x01,
-0x02,0x03,0x04,0x05,0x06,0x07,0x08,0x09,
-0x0A,0x0B,0x05,0x06,0x07,0x08,0x09,0x0A,
-0x0B,0x0C,0x0D,0x0E,0x0F,0x10,0x11,0x12,
-0x13,0x14,0x15,0x16,0x17,0x18,0x19,0x1A,
-0x1B,0x1C,0x1D,0x1E,0x1F,0x20,0x21,0x22,
-0x23,0x24,0x25,0x20,0x21,0x22,0x23,0x24,
-0x25,0x26,0x27,0x28,0x29,0x2A,0x2B,0x2C,
-0x2D,0x2E,0x2F,0x30,0x31,0x32,0x33,0x34,
-0x35,0x36,0x37,0x38,0x39,0x3A,0x3B,0x3C,
-0x3D,0x3E,0x3F,0x40,0x41,0x42,0x43,0x44,
-};
-
-static unsigned const char cov_2char[64]={
-0x2E,0x2F,0x30,0x31,0x32,0x33,0x34,0x35,
-0x36,0x37,0x38,0x39,0x41,0x42,0x43,0x44,
-0x45,0x46,0x47,0x48,0x49,0x4A,0x4B,0x4C,
-0x4D,0x4E,0x4F,0x50,0x51,0x52,0x53,0x54,
-0x55,0x56,0x57,0x58,0x59,0x5A,0x61,0x62,
-0x63,0x64,0x65,0x66,0x67,0x68,0x69,0x6A,
-0x6B,0x6C,0x6D,0x6E,0x6F,0x70,0x71,0x72,
-0x73,0x74,0x75,0x76,0x77,0x78,0x79,0x7A
-};
-
-char *DES_crypt(const char *buf, const char *salt)
-	{
-	static char buff[14];
-
-#ifndef CHARSET_EBCDIC
-	return(DES_fcrypt(buf,salt,buff));
-#else
-	char e_salt[2+1];
-	char e_buf[32+1];	/* replace 32 by 8 ? */
-	char *ret;
-
-	/* Copy at most 2 chars of salt */
-	if ((e_salt[0] = salt[0]) != '\0')
-	    e_salt[1] = salt[1];
-
-	/* Copy at most 32 chars of password */
-	strncpy (e_buf, buf, sizeof(e_buf));
-
-	/* Make sure we have a delimiter */
-	e_salt[sizeof(e_salt)-1] = e_buf[sizeof(e_buf)-1] = '\0';
-
-	/* Convert the e_salt to ASCII, as that's what DES_fcrypt works on */
-	ebcdic2ascii(e_salt, e_salt, sizeof e_salt);
-
-	/* Convert the cleartext password to ASCII */
-	ebcdic2ascii(e_buf, e_buf, sizeof e_buf);
-
-	/* Encrypt it (from/to ASCII) */
-	ret = DES_fcrypt(e_buf,e_salt,buff);
-
-	/* Convert the result back to EBCDIC */
-	ascii2ebcdic(ret, ret, strlen(ret));
-	
-	return ret;
-#endif
-	}
-
-
-char *DES_fcrypt(const char *buf, const char *salt, char *ret)
-	{
-	unsigned int i,j,x,y;
-	DES_LONG Eswap0,Eswap1;
-	DES_LONG out[2],ll;
-	DES_cblock key;
-	DES_key_schedule ks;
-	unsigned char bb[9];
-	unsigned char *b=bb;
-	unsigned char c,u;
-
-	/* eay 25/08/92
-	 * If you call crypt("pwd","*") as often happens when you
-	 * have * as the pwd field in /etc/passwd, the function
-	 * returns *\0XXXXXXXXX
-	 * The \0 makes the string look like * so the pwd "*" would
-	 * crypt to "*".  This was found when replacing the crypt in
-	 * our shared libraries.  People found that the disabled
-	 * accounts effectively had no passwd :-(. */
-#ifndef CHARSET_EBCDIC
-	x=ret[0]=((salt[0] == '\0')?'A':salt[0]);
-	Eswap0=con_salt[x]<<2;
-	x=ret[1]=((salt[1] == '\0')?'A':salt[1]);
-	Eswap1=con_salt[x]<<6;
-#else
-	x=ret[0]=((salt[0] == '\0')?os_toascii['A']:salt[0]);
-	Eswap0=con_salt[x]<<2;
-	x=ret[1]=((salt[1] == '\0')?os_toascii['A']:salt[1]);
-	Eswap1=con_salt[x]<<6;
-#endif
-
-/* EAY
-r=strlen(buf);
-r=(r+7)/8;
-*/
-	for (i=0; i<8; i++)
-		{
-		c= *(buf++);
-		if (!c) break;
-		key[i]=(c<<1);
-		}
-	for (; i<8; i++)
-		key[i]=0;
-
-	DES_set_key_unchecked(&key,&ks);
-	fcrypt_body(&(out[0]),&ks,Eswap0,Eswap1);
-
-	ll=out[0]; l2c(ll,b);
-	ll=out[1]; l2c(ll,b);
-	y=0;
-	u=0x80;
-	bb[8]=0;
-	for (i=2; i<13; i++)
-		{
-		c=0;
-		for (j=0; j<6; j++)
-			{
-			c<<=1;
-			if (bb[y] & u) c|=1;
-			u>>=1;
-			if (!u)
-				{
-				y++;
-				u=0x80;
-				}
-			}
-		ret[i]=cov_2char[c];
-		}
-	ret[13]='\0';
-	return(ret);
-	}
-
diff --git a/crypto/openssl/crypto/des/fcrypt_b.c b/crypto/openssl/crypto/des/fcrypt_b.c
deleted file mode 100644
index 1390138787ff..000000000000
--- a/crypto/openssl/crypto/des/fcrypt_b.c
+++ /dev/null
@@ -1,145 +0,0 @@
-/* crypto/des/fcrypt_b.c */
-/* Copyright (C) 1995-1998 Eric Young (eay@cryptsoft.com)
- * All rights reserved.
- *
- * This package is an SSL implementation written
- * by Eric Young (eay@cryptsoft.com).
- * The implementation was written so as to conform with Netscapes SSL.
- * 
- * This library is free for commercial and non-commercial use as long as
- * the following conditions are aheared to.  The following conditions
- * apply to all code found in this distribution, be it the RC4, RSA,
- * lhash, DES, etc., code; not just the SSL code.  The SSL documentation
- * included with this distribution is covered by the same copyright terms
- * except that the holder is Tim Hudson (tjh@cryptsoft.com).
- * 
- * Copyright remains Eric Young's, and as such any Copyright notices in
- * the code are not to be removed.
- * If this package is used in a product, Eric Young should be given attribution
- * as the author of the parts of the library used.
- * This can be in the form of a textual message at program startup or
- * in documentation (online or textual) provided with the package.
- * 
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions
- * are met:
- * 1. Redistributions of source code must retain the copyright
- *    notice, this list of conditions and the following disclaimer.
- * 2. Redistributions in binary form must reproduce the above copyright
- *    notice, this list of conditions and the following disclaimer in the
- *    documentation and/or other materials provided with the distribution.
- * 3. All advertising materials mentioning features or use of this software
- *    must display the following acknowledgement:
- *    "This product includes cryptographic software written by
- *     Eric Young (eay@cryptsoft.com)"
- *    The word 'cryptographic' can be left out if the rouines from the library
- *    being used are not cryptographic related :-).
- * 4. If you include any Windows specific code (or a derivative thereof) from 
- *    the apps directory (application code) you must include an acknowledgement:
- *    "This product includes software written by Tim Hudson (tjh@cryptsoft.com)"
- * 
- * THIS SOFTWARE IS PROVIDED BY ERIC YOUNG ``AS IS'' AND
- * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
- * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
- * ARE DISCLAIMED.  IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE
- * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
- * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
- * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
- * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
- * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
- * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
- * SUCH DAMAGE.
- * 
- * The licence and distribution terms for any publically available version or
- * derivative of this code cannot be changed.  i.e. this code cannot simply be
- * copied and put under another distribution licence
- * [including the GNU Public Licence.]
- */
-
-#include <stdio.h>
-
-/* This version of crypt has been developed from my MIT compatible
- * DES library.
- * The library is available at pub/Crypto/DES at ftp.psy.uq.oz.au
- * Eric Young (eay@cryptsoft.com)
- */
-
-#define DES_FCRYPT
-#include "des_locl.h"
-#undef DES_FCRYPT
-
-#undef PERM_OP
-#define PERM_OP(a,b,t,n,m) ((t)=((((a)>>(n))^(b))&(m)),\
-	(b)^=(t),\
-	(a)^=((t)<<(n)))
-
-#undef HPERM_OP
-#define HPERM_OP(a,t,n,m) ((t)=((((a)<<(16-(n)))^(a))&(m)),\
-	(a)=(a)^(t)^(t>>(16-(n))))\
-
-void fcrypt_body(DES_LONG *out, DES_key_schedule *ks, DES_LONG Eswap0,
-		 DES_LONG Eswap1)
-	{
-	register DES_LONG l,r,t,u;
-#ifdef DES_PTR
-	register const unsigned char *des_SP=(const unsigned char *)DES_SPtrans;
-#endif
-	register DES_LONG *s;
-	register int j;
-	register DES_LONG E0,E1;
-
-	l=0;
-	r=0;
-
-	s=(DES_LONG *)ks;
-	E0=Eswap0;
-	E1=Eswap1;
-
-	for (j=0; j<25; j++)
-		{
-#ifndef DES_UNROLL
-		register int i;
-
-		for (i=0; i<32; i+=8)
-			{
-			D_ENCRYPT(l,r,i+0); /*  1 */
-			D_ENCRYPT(r,l,i+2); /*  2 */
-			D_ENCRYPT(l,r,i+4); /*  1 */
-			D_ENCRYPT(r,l,i+6); /*  2 */
-			}
-#else
-		D_ENCRYPT(l,r, 0); /*  1 */
-		D_ENCRYPT(r,l, 2); /*  2 */
-		D_ENCRYPT(l,r, 4); /*  3 */
-		D_ENCRYPT(r,l, 6); /*  4 */
-		D_ENCRYPT(l,r, 8); /*  5 */
-		D_ENCRYPT(r,l,10); /*  6 */
-		D_ENCRYPT(l,r,12); /*  7 */
-		D_ENCRYPT(r,l,14); /*  8 */
-		D_ENCRYPT(l,r,16); /*  9 */
-		D_ENCRYPT(r,l,18); /*  10 */
-		D_ENCRYPT(l,r,20); /*  11 */
-		D_ENCRYPT(r,l,22); /*  12 */
-		D_ENCRYPT(l,r,24); /*  13 */
-		D_ENCRYPT(r,l,26); /*  14 */
-		D_ENCRYPT(l,r,28); /*  15 */
-		D_ENCRYPT(r,l,30); /*  16 */
-#endif
-
-		t=l;
-		l=r;
-		r=t;
-		}
-	l=ROTATE(l,3)&0xffffffffL;
-	r=ROTATE(r,3)&0xffffffffL;
-
-	PERM_OP(l,r,t, 1,0x55555555L);
-	PERM_OP(r,l,t, 8,0x00ff00ffL);
-	PERM_OP(l,r,t, 2,0x33333333L);
-	PERM_OP(r,l,t,16,0x0000ffffL);
-	PERM_OP(l,r,t, 4,0x0f0f0f0fL);
-
-	out[0]=r;
-	out[1]=l;
-	}
-
diff --git a/crypto/openssl/crypto/des/makefile.bc b/crypto/openssl/crypto/des/makefile.bc
deleted file mode 100644
index 1fe6d4915a91..000000000000
--- a/crypto/openssl/crypto/des/makefile.bc
+++ /dev/null
@@ -1,50 +0,0 @@
-#
-# Origional BC Makefile from Teun <Teun.Nijssen@kub.nl>
-#
-#
-CC      = bcc
-TLIB    = tlib /0 /C
-# note: the -3 flag produces code for 386, 486, Pentium etc; omit it for 286s
-OPTIMIZE= -3 -O2
-#WINDOWS= -W
-CFLAGS  = -c -ml -d $(OPTIMIZE) $(WINDOWS) -DMSDOS
-LFLAGS  = -ml $(WINDOWS)
-
-.c.obj:
-	$(CC) $(CFLAGS) $*.c
-
-.obj.exe:
-	$(CC) $(LFLAGS) -e$*.exe $*.obj libdes.lib  
-
-all: $(LIB) destest.exe rpw.exe des.exe speed.exe
-
-# "make clean": use a directory containing only libdes .exe and .obj files...
-clean:
-	del *.exe
-	del *.obj
-	del libdes.lib
-	del libdes.rsp
-
-OBJS=   cbc_cksm.obj cbc_enc.obj  ecb_enc.obj  pcbc_enc.obj \
-	qud_cksm.obj rand_key.obj set_key.obj  str2key.obj \
-	enc_read.obj enc_writ.obj fcrypt.obj   cfb_enc.obj \
-	ecb3_enc.obj ofb_enc.obj  cbc3_enc.obj read_pwd.obj\
-	cfb64enc.obj ofb64enc.obj ede_enc.obj  cfb64ede.obj\
-	ofb64ede.obj supp.obj
-
-LIB=    libdes.lib
-
-$(LIB): $(OBJS)
-	del $(LIB)
-	makersp "+%s &\n" &&|
-	$(OBJS)
-|       >libdes.rsp
-	$(TLIB) libdes.lib @libdes.rsp,nul
-	del libdes.rsp
-
-destest.exe: destest.obj libdes.lib
-rpw.exe:     rpw.obj libdes.lib
-speed.exe:   speed.obj libdes.lib
-des.exe:     des.obj libdes.lib
-
-
diff --git a/crypto/openssl/crypto/des/ncbc_enc.c b/crypto/openssl/crypto/des/ncbc_enc.c
deleted file mode 100644
index fda23d522f3f..000000000000
--- a/crypto/openssl/crypto/des/ncbc_enc.c
+++ /dev/null
@@ -1,148 +0,0 @@
-/* crypto/des/ncbc_enc.c */
-/*
- * #included by:
- *    cbc_enc.c  (DES_cbc_encrypt)
- *    des_enc.c  (DES_ncbc_encrypt)
- */
-/* Copyright (C) 1995-1998 Eric Young (eay@cryptsoft.com)
- * All rights reserved.
- *
- * This package is an SSL implementation written
- * by Eric Young (eay@cryptsoft.com).
- * The implementation was written so as to conform with Netscapes SSL.
- * 
- * This library is free for commercial and non-commercial use as long as
- * the following conditions are aheared to.  The following conditions
- * apply to all code found in this distribution, be it the RC4, RSA,
- * lhash, DES, etc., code; not just the SSL code.  The SSL documentation
- * included with this distribution is covered by the same copyright terms
- * except that the holder is Tim Hudson (tjh@cryptsoft.com).
- * 
- * Copyright remains Eric Young's, and as such any Copyright notices in
- * the code are not to be removed.
- * If this package is used in a product, Eric Young should be given attribution
- * as the author of the parts of the library used.
- * This can be in the form of a textual message at program startup or
- * in documentation (online or textual) provided with the package.
- * 
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions
- * are met:
- * 1. Redistributions of source code must retain the copyright
- *    notice, this list of conditions and the following disclaimer.
- * 2. Redistributions in binary form must reproduce the above copyright
- *    notice, this list of conditions and the following disclaimer in the
- *    documentation and/or other materials provided with the distribution.
- * 3. All advertising materials mentioning features or use of this software
- *    must display the following acknowledgement:
- *    "This product includes cryptographic software written by
- *     Eric Young (eay@cryptsoft.com)"
- *    The word 'cryptographic' can be left out if the rouines from the library
- *    being used are not cryptographic related :-).
- * 4. If you include any Windows specific code (or a derivative thereof) from 
- *    the apps directory (application code) you must include an acknowledgement:
- *    "This product includes software written by Tim Hudson (tjh@cryptsoft.com)"
- * 
- * THIS SOFTWARE IS PROVIDED BY ERIC YOUNG ``AS IS'' AND
- * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
- * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
- * ARE DISCLAIMED.  IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE
- * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
- * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
- * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
- * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
- * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
- * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
- * SUCH DAMAGE.
- * 
- * The licence and distribution terms for any publically available version or
- * derivative of this code cannot be changed.  i.e. this code cannot simply be
- * copied and put under another distribution licence
- * [including the GNU Public Licence.]
- */
-
-#include "des_locl.h"
-
-#ifdef CBC_ENC_C__DONT_UPDATE_IV
-void DES_cbc_encrypt(const unsigned char *in, unsigned char *out, long length,
-		     DES_key_schedule *_schedule, DES_cblock *ivec, int enc)
-#else
-void DES_ncbc_encrypt(const unsigned char *in, unsigned char *out, long length,
-		     DES_key_schedule *_schedule, DES_cblock *ivec, int enc)
-#endif
-	{
-	register DES_LONG tin0,tin1;
-	register DES_LONG tout0,tout1,xor0,xor1;
-	register long l=length;
-	DES_LONG tin[2];
-	unsigned char *iv;
-
-	iv = &(*ivec)[0];
-
-	if (enc)
-		{
-		c2l(iv,tout0);
-		c2l(iv,tout1);
-		for (l-=8; l>=0; l-=8)
-			{
-			c2l(in,tin0);
-			c2l(in,tin1);
-			tin0^=tout0; tin[0]=tin0;
-			tin1^=tout1; tin[1]=tin1;
-			DES_encrypt1((DES_LONG *)tin,_schedule,DES_ENCRYPT);
-			tout0=tin[0]; l2c(tout0,out);
-			tout1=tin[1]; l2c(tout1,out);
-			}
-		if (l != -8)
-			{
-			c2ln(in,tin0,tin1,l+8);
-			tin0^=tout0; tin[0]=tin0;
-			tin1^=tout1; tin[1]=tin1;
-			DES_encrypt1((DES_LONG *)tin,_schedule,DES_ENCRYPT);
-			tout0=tin[0]; l2c(tout0,out);
-			tout1=tin[1]; l2c(tout1,out);
-			}
-#ifndef CBC_ENC_C__DONT_UPDATE_IV
-		iv = &(*ivec)[0];
-		l2c(tout0,iv);
-		l2c(tout1,iv);
-#endif
-		}
-	else
-		{
-		c2l(iv,xor0);
-		c2l(iv,xor1);
-		for (l-=8; l>=0; l-=8)
-			{
-			c2l(in,tin0); tin[0]=tin0;
-			c2l(in,tin1); tin[1]=tin1;
-			DES_encrypt1((DES_LONG *)tin,_schedule,DES_DECRYPT);
-			tout0=tin[0]^xor0;
-			tout1=tin[1]^xor1;
-			l2c(tout0,out);
-			l2c(tout1,out);
-			xor0=tin0;
-			xor1=tin1;
-			}
-		if (l != -8)
-			{
-			c2l(in,tin0); tin[0]=tin0;
-			c2l(in,tin1); tin[1]=tin1;
-			DES_encrypt1((DES_LONG *)tin,_schedule,DES_DECRYPT);
-			tout0=tin[0]^xor0;
-			tout1=tin[1]^xor1;
-			l2cn(tout0,tout1,out,l+8);
-#ifndef CBC_ENC_C__DONT_UPDATE_IV
-			xor0=tin0;
-			xor1=tin1;
-#endif
-			}
-#ifndef CBC_ENC_C__DONT_UPDATE_IV 
-		iv = &(*ivec)[0];
-		l2c(xor0,iv);
-		l2c(xor1,iv);
-#endif
-		}
-	tin0=tin1=tout0=tout1=xor0=xor1=0;
-	tin[0]=tin[1]=0;
-	}
diff --git a/crypto/openssl/crypto/des/ofb64ede.c b/crypto/openssl/crypto/des/ofb64ede.c
deleted file mode 100644
index 26bbf9a6a733..000000000000
--- a/crypto/openssl/crypto/des/ofb64ede.c
+++ /dev/null
@@ -1,125 +0,0 @@
-/* crypto/des/ofb64ede.c */
-/* Copyright (C) 1995-1998 Eric Young (eay@cryptsoft.com)
- * All rights reserved.
- *
- * This package is an SSL implementation written
- * by Eric Young (eay@cryptsoft.com).
- * The implementation was written so as to conform with Netscapes SSL.
- * 
- * This library is free for commercial and non-commercial use as long as
- * the following conditions are aheared to.  The following conditions
- * apply to all code found in this distribution, be it the RC4, RSA,
- * lhash, DES, etc., code; not just the SSL code.  The SSL documentation
- * included with this distribution is covered by the same copyright terms
- * except that the holder is Tim Hudson (tjh@cryptsoft.com).
- * 
- * Copyright remains Eric Young's, and as such any Copyright notices in
- * the code are not to be removed.
- * If this package is used in a product, Eric Young should be given attribution
- * as the author of the parts of the library used.
- * This can be in the form of a textual message at program startup or
- * in documentation (online or textual) provided with the package.
- * 
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions
- * are met:
- * 1. Redistributions of source code must retain the copyright
- *    notice, this list of conditions and the following disclaimer.
- * 2. Redistributions in binary form must reproduce the above copyright
- *    notice, this list of conditions and the following disclaimer in the
- *    documentation and/or other materials provided with the distribution.
- * 3. All advertising materials mentioning features or use of this software
- *    must display the following acknowledgement:
- *    "This product includes cryptographic software written by
- *     Eric Young (eay@cryptsoft.com)"
- *    The word 'cryptographic' can be left out if the rouines from the library
- *    being used are not cryptographic related :-).
- * 4. If you include any Windows specific code (or a derivative thereof) from 
- *    the apps directory (application code) you must include an acknowledgement:
- *    "This product includes software written by Tim Hudson (tjh@cryptsoft.com)"
- * 
- * THIS SOFTWARE IS PROVIDED BY ERIC YOUNG ``AS IS'' AND
- * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
- * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
- * ARE DISCLAIMED.  IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE
- * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
- * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
- * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
- * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
- * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
- * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
- * SUCH DAMAGE.
- * 
- * The licence and distribution terms for any publically available version or
- * derivative of this code cannot be changed.  i.e. this code cannot simply be
- * copied and put under another distribution licence
- * [including the GNU Public Licence.]
- */
-
-#include "des_locl.h"
-
-/* The input and output encrypted as though 64bit ofb mode is being
- * used.  The extra state information to record how much of the
- * 64bit block we have used is contained in *num;
- */
-void DES_ede3_ofb64_encrypt(register const unsigned char *in,
-			    register unsigned char *out, long length,
-			    DES_key_schedule *k1, DES_key_schedule *k2,
-			    DES_key_schedule *k3, DES_cblock *ivec,
-			    int *num)
-	{
-	register DES_LONG v0,v1;
-	register int n= *num;
-	register long l=length;
-	DES_cblock d;
-	register char *dp;
-	DES_LONG ti[2];
-	unsigned char *iv;
-	int save=0;
-
-	iv = &(*ivec)[0];
-	c2l(iv,v0);
-	c2l(iv,v1);
-	ti[0]=v0;
-	ti[1]=v1;
-	dp=(char *)d;
-	l2c(v0,dp);
-	l2c(v1,dp);
-	while (l--)
-		{
-		if (n == 0)
-			{
-			/* ti[0]=v0; */
-			/* ti[1]=v1; */
-			DES_encrypt3(ti,k1,k2,k3);
-			v0=ti[0];
-			v1=ti[1];
-
-			dp=(char *)d;
-			l2c(v0,dp);
-			l2c(v1,dp);
-			save++;
-			}
-		*(out++)= *(in++)^d[n];
-		n=(n+1)&0x07;
-		}
-	if (save)
-		{
-/*		v0=ti[0];
-		v1=ti[1];*/
-		iv = &(*ivec)[0];
-		l2c(v0,iv);
-		l2c(v1,iv);
-		}
-	v0=v1=ti[0]=ti[1]=0;
-	*num=n;
-	}
-
-#ifdef undef /* MACRO */
-void DES_ede2_ofb64_encrypt(register unsigned char *in,
-	     register unsigned char *out, long length, DES_key_schedule k1,
-	     DES_key_schedule k2, DES_cblock (*ivec), int *num)
-	{
-	DES_ede3_ofb64_encrypt(in, out, length, k1,k2,k1, ivec, num);
-	}
-#endif
diff --git a/crypto/openssl/crypto/des/ofb64enc.c b/crypto/openssl/crypto/des/ofb64enc.c
deleted file mode 100644
index 8ca3d49dea16..000000000000
--- a/crypto/openssl/crypto/des/ofb64enc.c
+++ /dev/null
@@ -1,110 +0,0 @@
-/* crypto/des/ofb64enc.c */
-/* Copyright (C) 1995-1998 Eric Young (eay@cryptsoft.com)
- * All rights reserved.
- *
- * This package is an SSL implementation written
- * by Eric Young (eay@cryptsoft.com).
- * The implementation was written so as to conform with Netscapes SSL.
- * 
- * This library is free for commercial and non-commercial use as long as
- * the following conditions are aheared to.  The following conditions
- * apply to all code found in this distribution, be it the RC4, RSA,
- * lhash, DES, etc., code; not just the SSL code.  The SSL documentation
- * included with this distribution is covered by the same copyright terms
- * except that the holder is Tim Hudson (tjh@cryptsoft.com).
- * 
- * Copyright remains Eric Young's, and as such any Copyright notices in
- * the code are not to be removed.
- * If this package is used in a product, Eric Young should be given attribution
- * as the author of the parts of the library used.
- * This can be in the form of a textual message at program startup or
- * in documentation (online or textual) provided with the package.
- * 
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions
- * are met:
- * 1. Redistributions of source code must retain the copyright
- *    notice, this list of conditions and the following disclaimer.
- * 2. Redistributions in binary form must reproduce the above copyright
- *    notice, this list of conditions and the following disclaimer in the
- *    documentation and/or other materials provided with the distribution.
- * 3. All advertising materials mentioning features or use of this software
- *    must display the following acknowledgement:
- *    "This product includes cryptographic software written by
- *     Eric Young (eay@cryptsoft.com)"
- *    The word 'cryptographic' can be left out if the rouines from the library
- *    being used are not cryptographic related :-).
- * 4. If you include any Windows specific code (or a derivative thereof) from 
- *    the apps directory (application code) you must include an acknowledgement:
- *    "This product includes software written by Tim Hudson (tjh@cryptsoft.com)"
- * 
- * THIS SOFTWARE IS PROVIDED BY ERIC YOUNG ``AS IS'' AND
- * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
- * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
- * ARE DISCLAIMED.  IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE
- * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
- * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
- * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
- * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
- * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
- * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
- * SUCH DAMAGE.
- * 
- * The licence and distribution terms for any publically available version or
- * derivative of this code cannot be changed.  i.e. this code cannot simply be
- * copied and put under another distribution licence
- * [including the GNU Public Licence.]
- */
-
-#include "des_locl.h"
-
-/* The input and output encrypted as though 64bit ofb mode is being
- * used.  The extra state information to record how much of the
- * 64bit block we have used is contained in *num;
- */
-void DES_ofb64_encrypt(register const unsigned char *in,
-		       register unsigned char *out, long length,
-		       DES_key_schedule *schedule, DES_cblock *ivec, int *num)
-	{
-	register DES_LONG v0,v1,t;
-	register int n= *num;
-	register long l=length;
-	DES_cblock d;
-	register unsigned char *dp;
-	DES_LONG ti[2];
-	unsigned char *iv;
-	int save=0;
-
-	iv = &(*ivec)[0];
-	c2l(iv,v0);
-	c2l(iv,v1);
-	ti[0]=v0;
-	ti[1]=v1;
-	dp=d;
-	l2c(v0,dp);
-	l2c(v1,dp);
-	while (l--)
-		{
-		if (n == 0)
-			{
-			DES_encrypt1(ti,schedule,DES_ENCRYPT);
-			dp=d;
-			t=ti[0]; l2c(t,dp);
-			t=ti[1]; l2c(t,dp);
-			save++;
-			}
-		*(out++)= *(in++)^d[n];
-		n=(n+1)&0x07;
-		}
-	if (save)
-		{
-		v0=ti[0];
-		v1=ti[1];
-		iv = &(*ivec)[0];
-		l2c(v0,iv);
-		l2c(v1,iv);
-		}
-	t=v0=v1=ti[0]=ti[1]=0;
-	*num=n;
-	}
-
diff --git a/crypto/openssl/crypto/des/ofb_enc.c b/crypto/openssl/crypto/des/ofb_enc.c
deleted file mode 100644
index e887a3c6f4bd..000000000000
--- a/crypto/openssl/crypto/des/ofb_enc.c
+++ /dev/null
@@ -1,135 +0,0 @@
-/* crypto/des/ofb_enc.c */
-/* Copyright (C) 1995-1998 Eric Young (eay@cryptsoft.com)
- * All rights reserved.
- *
- * This package is an SSL implementation written
- * by Eric Young (eay@cryptsoft.com).
- * The implementation was written so as to conform with Netscapes SSL.
- * 
- * This library is free for commercial and non-commercial use as long as
- * the following conditions are aheared to.  The following conditions
- * apply to all code found in this distribution, be it the RC4, RSA,
- * lhash, DES, etc., code; not just the SSL code.  The SSL documentation
- * included with this distribution is covered by the same copyright terms
- * except that the holder is Tim Hudson (tjh@cryptsoft.com).
- * 
- * Copyright remains Eric Young's, and as such any Copyright notices in
- * the code are not to be removed.
- * If this package is used in a product, Eric Young should be given attribution
- * as the author of the parts of the library used.
- * This can be in the form of a textual message at program startup or
- * in documentation (online or textual) provided with the package.
- * 
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions
- * are met:
- * 1. Redistributions of source code must retain the copyright
- *    notice, this list of conditions and the following disclaimer.
- * 2. Redistributions in binary form must reproduce the above copyright
- *    notice, this list of conditions and the following disclaimer in the
- *    documentation and/or other materials provided with the distribution.
- * 3. All advertising materials mentioning features or use of this software
- *    must display the following acknowledgement:
- *    "This product includes cryptographic software written by
- *     Eric Young (eay@cryptsoft.com)"
- *    The word 'cryptographic' can be left out if the rouines from the library
- *    being used are not cryptographic related :-).
- * 4. If you include any Windows specific code (or a derivative thereof) from 
- *    the apps directory (application code) you must include an acknowledgement:
- *    "This product includes software written by Tim Hudson (tjh@cryptsoft.com)"
- * 
- * THIS SOFTWARE IS PROVIDED BY ERIC YOUNG ``AS IS'' AND
- * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
- * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
- * ARE DISCLAIMED.  IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE
- * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
- * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
- * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
- * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
- * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
- * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
- * SUCH DAMAGE.
- * 
- * The licence and distribution terms for any publically available version or
- * derivative of this code cannot be changed.  i.e. this code cannot simply be
- * copied and put under another distribution licence
- * [including the GNU Public Licence.]
- */
-
-#include "des_locl.h"
-
-/* The input and output are loaded in multiples of 8 bits.
- * What this means is that if you hame numbits=12 and length=2
- * the first 12 bits will be retrieved from the first byte and half
- * the second.  The second 12 bits will come from the 3rd and half the 4th
- * byte.
- */
-void DES_ofb_encrypt(const unsigned char *in, unsigned char *out, int numbits,
-		     long length, DES_key_schedule *schedule,
-		     DES_cblock *ivec)
-	{
-	register DES_LONG d0,d1,vv0,vv1,v0,v1,n=(numbits+7)/8;
-	register DES_LONG mask0,mask1;
-	register long l=length;
-	register int num=numbits;
-	DES_LONG ti[2];
-	unsigned char *iv;
-
-	if (num > 64) return;
-	if (num > 32)
-		{
-		mask0=0xffffffffL;
-		if (num >= 64)
-			mask1=mask0;
-		else
-			mask1=(1L<<(num-32))-1;
-		}
-	else
-		{
-		if (num == 32)
-			mask0=0xffffffffL;
-		else
-			mask0=(1L<<num)-1;
-		mask1=0x00000000L;
-		}
-
-	iv = &(*ivec)[0];
-	c2l(iv,v0);
-	c2l(iv,v1);
-	ti[0]=v0;
-	ti[1]=v1;
-	while (l-- > 0)
-		{
-		ti[0]=v0;
-		ti[1]=v1;
-		DES_encrypt1((DES_LONG *)ti,schedule,DES_ENCRYPT);
-		vv0=ti[0];
-		vv1=ti[1];
-		c2ln(in,d0,d1,n);
-		in+=n;
-		d0=(d0^vv0)&mask0;
-		d1=(d1^vv1)&mask1;
-		l2cn(d0,d1,out,n);
-		out+=n;
-
-		if (num == 32)
-			{ v0=v1; v1=vv0; }
-		else if (num == 64)
-				{ v0=vv0; v1=vv1; }
-		else if (num > 32) /* && num != 64 */
-			{
-			v0=((v1>>(num-32))|(vv0<<(64-num)))&0xffffffffL;
-			v1=((vv0>>(num-32))|(vv1<<(64-num)))&0xffffffffL;
-			}
-		else /* num < 32 */
-			{
-			v0=((v0>>num)|(v1<<(32-num)))&0xffffffffL;
-			v1=((v1>>num)|(vv0<<(32-num)))&0xffffffffL;
-			}
-		}
-	iv = &(*ivec)[0];
-	l2c(v0,iv);
-	l2c(v1,iv);
-	v0=v1=d0=d1=ti[0]=ti[1]=vv0=vv1=0;
-	}
-
diff --git a/crypto/openssl/crypto/des/options.txt b/crypto/openssl/crypto/des/options.txt
deleted file mode 100644
index 6e2b50f765e7..000000000000
--- a/crypto/openssl/crypto/des/options.txt
+++ /dev/null
@@ -1,39 +0,0 @@
-Note that the UNROLL option makes the 'inner' des loop unroll all 16 rounds
-instead of the default 4.
-RISC1 and RISC2 are 2 alternatives for the inner loop and
-PTR means to use pointers arithmatic instead of arrays.
-
-FreeBSD - Pentium Pro 200mhz - gcc 2.7.2.2 - assembler		577,000 4620k/s
-IRIX 6.2 - R10000 195mhz - cc (-O3 -n32) - UNROLL RISC2 PTR	496,000 3968k/s
-solaris 2.5.1 usparc 167mhz?? - SC4.0 - UNROLL RISC1 PTR [1]	459,400 3672k/s
-FreeBSD - Pentium Pro 200mhz - gcc 2.7.2.2 - UNROLL RISC1	433,000 3468k/s
-solaris 2.5.1 usparc 167mhz?? - gcc 2.7.2 - UNROLL 		380,000 3041k/s
-linux - pentium 100mhz - gcc 2.7.0 - assembler			281,000 2250k/s
-NT 4.0 - pentium 100mhz - VC 4.2 - assembler			281,000 2250k/s
-AIX 4.1? - PPC604 100mhz - cc - UNROLL 				275,000 2200k/s
-IRIX 5.3 - R4400 200mhz - gcc 2.6.3 - UNROLL RISC2 PTR		235,300 1882k/s
-IRIX 5.3 - R4400 200mhz - cc - UNROLL RISC2 PTR			233,700 1869k/s
-NT 4.0 - pentium 100mhz - VC 4.2 - UNROLL RISC1 PTR		191,000 1528k/s
-DEC Alpha 165mhz??  - cc - RISC2 PTR [2]			181,000 1448k/s
-linux - pentium 100mhz - gcc 2.7.0 - UNROLL RISC1 PTR		158,500 1268k/s
-HPUX 10 - 9000/887 - cc - UNROLL [3]	 			148,000	1190k/s
-solaris 2.5.1 - sparc 10 50mhz - gcc 2.7.2 - UNROLL		123,600  989k/s
-IRIX 5.3 - R4000 100mhz - cc - UNROLL RISC2 PTR			101,000  808k/s
-DGUX - 88100 50mhz(?) - gcc 2.6.3 - UNROLL			 81,000  648k/s
-solaris 2.4 486 50mhz - gcc 2.6.3 - assembler			 65,000  522k/s
-HPUX 10 - 9000/887 - k&r cc (default compiler) - UNROLL PTR	 76,000	 608k/s
-solaris 2.4 486 50mhz - gcc 2.6.3 - UNROLL RISC2		 43,500  344k/s
-AIX - old slow one :-) - cc -					 39,000  312k/s
-
-Notes.
-[1] For the ultra sparc, SunC 4.0 
-    cc -xtarget=ultra -xarch=v8plus -Xa -xO5, running 'des_opts'
-    gives a speed of 344,000 des/s while 'speed' gives 459,000 des/s.
-    I'll record the higher since it is coming from the library but it
-    is all rather weird.
-[2] Similar to the ultra sparc ([1]), 181,000 for 'des_opts' vs 175,000.
-[3] I was unable to get access to this machine when it was not heavily loaded.
-    As such, my timing program was never able to get more that %30 of the CPU.
-    This would cause the program to give much lower speed numbers because
-    it would be 'fighting' to stay in the cache with the other CPU burning
-    processes.
diff --git a/crypto/openssl/crypto/des/pcbc_enc.c b/crypto/openssl/crypto/des/pcbc_enc.c
deleted file mode 100644
index 17a40f9520f0..000000000000
--- a/crypto/openssl/crypto/des/pcbc_enc.c
+++ /dev/null
@@ -1,123 +0,0 @@
-/* crypto/des/pcbc_enc.c */
-/* Copyright (C) 1995-1998 Eric Young (eay@cryptsoft.com)
- * All rights reserved.
- *
- * This package is an SSL implementation written
- * by Eric Young (eay@cryptsoft.com).
- * The implementation was written so as to conform with Netscapes SSL.
- * 
- * This library is free for commercial and non-commercial use as long as
- * the following conditions are aheared to.  The following conditions
- * apply to all code found in this distribution, be it the RC4, RSA,
- * lhash, DES, etc., code; not just the SSL code.  The SSL documentation
- * included with this distribution is covered by the same copyright terms
- * except that the holder is Tim Hudson (tjh@cryptsoft.com).
- * 
- * Copyright remains Eric Young's, and as such any Copyright notices in
- * the code are not to be removed.
- * If this package is used in a product, Eric Young should be given attribution
- * as the author of the parts of the library used.
- * This can be in the form of a textual message at program startup or
- * in documentation (online or textual) provided with the package.
- * 
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions
- * are met:
- * 1. Redistributions of source code must retain the copyright
- *    notice, this list of conditions and the following disclaimer.
- * 2. Redistributions in binary form must reproduce the above copyright
- *    notice, this list of conditions and the following disclaimer in the
- *    documentation and/or other materials provided with the distribution.
- * 3. All advertising materials mentioning features or use of this software
- *    must display the following acknowledgement:
- *    "This product includes cryptographic software written by
- *     Eric Young (eay@cryptsoft.com)"
- *    The word 'cryptographic' can be left out if the rouines from the library
- *    being used are not cryptographic related :-).
- * 4. If you include any Windows specific code (or a derivative thereof) from 
- *    the apps directory (application code) you must include an acknowledgement:
- *    "This product includes software written by Tim Hudson (tjh@cryptsoft.com)"
- * 
- * THIS SOFTWARE IS PROVIDED BY ERIC YOUNG ``AS IS'' AND
- * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
- * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
- * ARE DISCLAIMED.  IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE
- * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
- * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
- * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
- * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
- * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
- * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
- * SUCH DAMAGE.
- * 
- * The licence and distribution terms for any publically available version or
- * derivative of this code cannot be changed.  i.e. this code cannot simply be
- * copied and put under another distribution licence
- * [including the GNU Public Licence.]
- */
-
-#include "des_locl.h"
-
-void DES_pcbc_encrypt(const unsigned char *input, unsigned char *output,
-		      long length, DES_key_schedule *schedule,
-		      DES_cblock *ivec, int enc)
-	{
-	register DES_LONG sin0,sin1,xor0,xor1,tout0,tout1;
-	DES_LONG tin[2];
-	const unsigned char *in;
-	unsigned char *out,*iv;
-
-	in=input;
-	out=output;
-	iv = &(*ivec)[0];
-
-	if (enc)
-		{
-		c2l(iv,xor0);
-		c2l(iv,xor1);
-		for (; length>0; length-=8)
-			{
-			if (length >= 8)
-				{
-				c2l(in,sin0);
-				c2l(in,sin1);
-				}
-			else
-				c2ln(in,sin0,sin1,length);
-			tin[0]=sin0^xor0;
-			tin[1]=sin1^xor1;
-			DES_encrypt1((DES_LONG *)tin,schedule,DES_ENCRYPT);
-			tout0=tin[0];
-			tout1=tin[1];
-			xor0=sin0^tout0;
-			xor1=sin1^tout1;
-			l2c(tout0,out);
-			l2c(tout1,out);
-			}
-		}
-	else
-		{
-		c2l(iv,xor0); c2l(iv,xor1);
-		for (; length>0; length-=8)
-			{
-			c2l(in,sin0);
-			c2l(in,sin1);
-			tin[0]=sin0;
-			tin[1]=sin1;
-			DES_encrypt1((DES_LONG *)tin,schedule,DES_DECRYPT);
-			tout0=tin[0]^xor0;
-			tout1=tin[1]^xor1;
-			if (length >= 8)
-				{
-				l2c(tout0,out);
-				l2c(tout1,out);
-				}
-			else
-				l2cn(tout0,tout1,out,length);
-			xor0=tout0^sin0;
-			xor1=tout1^sin1;
-			}
-		}
-	tin[0]=tin[1]=0;
-	sin0=sin1=xor0=xor1=tout0=tout1=0;
-	}
diff --git a/crypto/openssl/crypto/des/qud_cksm.c b/crypto/openssl/crypto/des/qud_cksm.c
deleted file mode 100644
index dac201227e0d..000000000000
--- a/crypto/openssl/crypto/des/qud_cksm.c
+++ /dev/null
@@ -1,139 +0,0 @@
-/* crypto/des/qud_cksm.c */
-/* Copyright (C) 1995-1998 Eric Young (eay@cryptsoft.com)
- * All rights reserved.
- *
- * This package is an SSL implementation written
- * by Eric Young (eay@cryptsoft.com).
- * The implementation was written so as to conform with Netscapes SSL.
- * 
- * This library is free for commercial and non-commercial use as long as
- * the following conditions are aheared to.  The following conditions
- * apply to all code found in this distribution, be it the RC4, RSA,
- * lhash, DES, etc., code; not just the SSL code.  The SSL documentation
- * included with this distribution is covered by the same copyright terms
- * except that the holder is Tim Hudson (tjh@cryptsoft.com).
- * 
- * Copyright remains Eric Young's, and as such any Copyright notices in
- * the code are not to be removed.
- * If this package is used in a product, Eric Young should be given attribution
- * as the author of the parts of the library used.
- * This can be in the form of a textual message at program startup or
- * in documentation (online or textual) provided with the package.
- * 
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions
- * are met:
- * 1. Redistributions of source code must retain the copyright
- *    notice, this list of conditions and the following disclaimer.
- * 2. Redistributions in binary form must reproduce the above copyright
- *    notice, this list of conditions and the following disclaimer in the
- *    documentation and/or other materials provided with the distribution.
- * 3. All advertising materials mentioning features or use of this software
- *    must display the following acknowledgement:
- *    "This product includes cryptographic software written by
- *     Eric Young (eay@cryptsoft.com)"
- *    The word 'cryptographic' can be left out if the rouines from the library
- *    being used are not cryptographic related :-).
- * 4. If you include any Windows specific code (or a derivative thereof) from 
- *    the apps directory (application code) you must include an acknowledgement:
- *    "This product includes software written by Tim Hudson (tjh@cryptsoft.com)"
- * 
- * THIS SOFTWARE IS PROVIDED BY ERIC YOUNG ``AS IS'' AND
- * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
- * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
- * ARE DISCLAIMED.  IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE
- * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
- * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
- * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
- * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
- * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
- * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
- * SUCH DAMAGE.
- * 
- * The licence and distribution terms for any publically available version or
- * derivative of this code cannot be changed.  i.e. this code cannot simply be
- * copied and put under another distribution licence
- * [including the GNU Public Licence.]
- */
-
-/* From "Message Authentication"  R.R. Jueneman, S.M. Matyas, C.H. Meyer
- * IEEE Communications Magazine Sept 1985 Vol. 23 No. 9 p 29-40
- * This module in only based on the code in this paper and is
- * almost definitely not the same as the MIT implementation.
- */
-#include "des_locl.h"
-
-/* bug fix for dos - 7/6/91 - Larry hughes@logos.ucs.indiana.edu */
-#define Q_B0(a)	(((DES_LONG)(a)))
-#define Q_B1(a)	(((DES_LONG)(a))<<8)
-#define Q_B2(a)	(((DES_LONG)(a))<<16)
-#define Q_B3(a)	(((DES_LONG)(a))<<24)
-
-/* used to scramble things a bit */
-/* Got the value MIT uses via brute force :-) 2/10/90 eay */
-#define NOISE	((DES_LONG)83653421L)
-
-DES_LONG DES_quad_cksum(const unsigned char *input, DES_cblock output[],
-	     long length, int out_count, DES_cblock *seed)
-	{
-	DES_LONG z0,z1,t0,t1;
-	int i;
-	long l;
-	const unsigned char *cp;
-#ifdef _CRAY
-	struct lp_st { int a:32; int b:32; } *lp;
-#else
-	DES_LONG *lp;
-#endif
-
-	if (out_count < 1) out_count=1;
-#ifdef _CRAY
-	lp = (struct lp_st *) &(output[0])[0];
-#else
-	lp = (DES_LONG *) &(output[0])[0];
-#endif
-
-	z0=Q_B0((*seed)[0])|Q_B1((*seed)[1])|Q_B2((*seed)[2])|Q_B3((*seed)[3]);
-	z1=Q_B0((*seed)[4])|Q_B1((*seed)[5])|Q_B2((*seed)[6])|Q_B3((*seed)[7]);
-
-	for (i=0; ((i<4)&&(i<out_count)); i++)
-		{
-		cp=input;
-		l=length;
-		while (l > 0)
-			{
-			if (l > 1)
-				{
-				t0= (DES_LONG)(*(cp++));
-				t0|=(DES_LONG)Q_B1(*(cp++));
-				l--;
-				}
-			else
-				t0= (DES_LONG)(*(cp++));
-			l--;
-			/* add */
-			t0+=z0;
-			t0&=0xffffffffL;
-			t1=z1;
-			/* square, well sort of square */
-			z0=((((t0*t0)&0xffffffffL)+((t1*t1)&0xffffffffL))
-				&0xffffffffL)%0x7fffffffL; 
-			z1=((t0*((t1+NOISE)&0xffffffffL))&0xffffffffL)%0x7fffffffL;
-			}
-		if (lp != NULL)
-			{
-			/* The MIT library assumes that the checksum is
-			 * composed of 2*out_count 32 bit ints */
-#ifdef _CRAY
-			(*lp).a = z0;
-			(*lp).b = z1;
-			lp++;
-#else
-			*lp++ = z0;
-			*lp++ = z1;
-#endif
-			}
-		}
-	return(z0);
-	}
-
diff --git a/crypto/openssl/crypto/des/rand_key.c b/crypto/openssl/crypto/des/rand_key.c
deleted file mode 100644
index 239816556858..000000000000
--- a/crypto/openssl/crypto/des/rand_key.c
+++ /dev/null
@@ -1,68 +0,0 @@
-/* crypto/des/rand_key.c */
-/* ====================================================================
- * Copyright (c) 1998-2000 The OpenSSL Project.  All rights reserved.
- *
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions
- * are met:
- *
- * 1. Redistributions of source code must retain the above copyright
- *    notice, this list of conditions and the following disclaimer. 
- *
- * 2. Redistributions in binary form must reproduce the above copyright
- *    notice, this list of conditions and the following disclaimer in
- *    the documentation and/or other materials provided with the
- *    distribution.
- *
- * 3. All advertising materials mentioning features or use of this
- *    software must display the following acknowledgment:
- *    "This product includes software developed by the OpenSSL Project
- *    for use in the OpenSSL Toolkit. (http://www.openssl.org/)"
- *
- * 4. The names "OpenSSL Toolkit" and "OpenSSL Project" must not be used to
- *    endorse or promote products derived from this software without
- *    prior written permission. For written permission, please contact
- *    openssl-core@openssl.org.
- *
- * 5. Products derived from this software may not be called "OpenSSL"
- *    nor may "OpenSSL" appear in their names without prior written
- *    permission of the OpenSSL Project.
- *
- * 6. Redistributions of any form whatsoever must retain the following
- *    acknowledgment:
- *    "This product includes software developed by the OpenSSL Project
- *    for use in the OpenSSL Toolkit (http://www.openssl.org/)"
- *
- * THIS SOFTWARE IS PROVIDED BY THE OpenSSL PROJECT ``AS IS'' AND ANY
- * EXPRESSED OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
- * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR
- * PURPOSE ARE DISCLAIMED.  IN NO EVENT SHALL THE OpenSSL PROJECT OR
- * ITS CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
- * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
- * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
- * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
- * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
- * STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
- * ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED
- * OF THE POSSIBILITY OF SUCH DAMAGE.
- * ====================================================================
- *
- * This product includes cryptographic software written by Eric Young
- * (eay@cryptsoft.com).  This product includes software written by Tim
- * Hudson (tjh@cryptsoft.com).
- *
- */
-
-#include <openssl/des.h>
-#include <openssl/rand.h>
-
-int DES_random_key(DES_cblock *ret)
-	{
-	do
-		{
-		if (RAND_bytes((unsigned char *)ret, sizeof(DES_cblock)) != 1)
-			return (0);
-		} while (DES_is_weak_key(ret));
-	DES_set_odd_parity(ret);
-	return (1);
-	}
diff --git a/crypto/openssl/crypto/des/read2pwd.c b/crypto/openssl/crypto/des/read2pwd.c
deleted file mode 100644
index ee6969f76eb5..000000000000
--- a/crypto/openssl/crypto/des/read2pwd.c
+++ /dev/null
@@ -1,140 +0,0 @@
-/* crypto/des/read2pwd.c */
-/* ====================================================================
- * Copyright (c) 2001-2002 The OpenSSL Project.  All rights reserved.
- *
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions
- * are met:
- *
- * 1. Redistributions of source code must retain the above copyright
- *    notice, this list of conditions and the following disclaimer. 
- *
- * 2. Redistributions in binary form must reproduce the above copyright
- *    notice, this list of conditions and the following disclaimer in
- *    the documentation and/or other materials provided with the
- *    distribution.
- *
- * 3. All advertising materials mentioning features or use of this
- *    software must display the following acknowledgment:
- *    "This product includes software developed by the OpenSSL Project
- *    for use in the OpenSSL Toolkit. (http://www.openssl.org/)"
- *
- * 4. The names "OpenSSL Toolkit" and "OpenSSL Project" must not be used to
- *    endorse or promote products derived from this software without
- *    prior written permission. For written permission, please contact
- *    openssl-core@openssl.org.
- *
- * 5. Products derived from this software may not be called "OpenSSL"
- *    nor may "OpenSSL" appear in their names without prior written
- *    permission of the OpenSSL Project.
- *
- * 6. Redistributions of any form whatsoever must retain the following
- *    acknowledgment:
- *    "This product includes software developed by the OpenSSL Project
- *    for use in the OpenSSL Toolkit (http://www.openssl.org/)"
- *
- * THIS SOFTWARE IS PROVIDED BY THE OpenSSL PROJECT ``AS IS'' AND ANY
- * EXPRESSED OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
- * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR
- * PURPOSE ARE DISCLAIMED.  IN NO EVENT SHALL THE OpenSSL PROJECT OR
- * ITS CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
- * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
- * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
- * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
- * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
- * STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
- * ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED
- * OF THE POSSIBILITY OF SUCH DAMAGE.
- * ====================================================================
- *
- * This product includes cryptographic software written by Eric Young
- * (eay@cryptsoft.com).  This product includes software written by Tim
- * Hudson (tjh@cryptsoft.com).
- *
- */
-/* Copyright (C) 1995-1998 Eric Young (eay@cryptsoft.com)
- * All rights reserved.
- *
- * This package is an SSL implementation written
- * by Eric Young (eay@cryptsoft.com).
- * The implementation was written so as to conform with Netscapes SSL.
- * 
- * This library is free for commercial and non-commercial use as long as
- * the following conditions are aheared to.  The following conditions
- * apply to all code found in this distribution, be it the RC4, RSA,
- * lhash, DES, etc., code; not just the SSL code.  The SSL documentation
- * included with this distribution is covered by the same copyright terms
- * except that the holder is Tim Hudson (tjh@cryptsoft.com).
- * 
- * Copyright remains Eric Young's, and as such any Copyright notices in
- * the code are not to be removed.
- * If this package is used in a product, Eric Young should be given attribution
- * as the author of the parts of the library used.
- * This can be in the form of a textual message at program startup or
- * in documentation (online or textual) provided with the package.
- * 
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions
- * are met:
- * 1. Redistributions of source code must retain the copyright
- *    notice, this list of conditions and the following disclaimer.
- * 2. Redistributions in binary form must reproduce the above copyright
- *    notice, this list of conditions and the following disclaimer in the
- *    documentation and/or other materials provided with the distribution.
- * 3. All advertising materials mentioning features or use of this software
- *    must display the following acknowledgement:
- *    "This product includes cryptographic software written by
- *     Eric Young (eay@cryptsoft.com)"
- *    The word 'cryptographic' can be left out if the rouines from the library
- *    being used are not cryptographic related :-).
- * 4. If you include any Windows specific code (or a derivative thereof) from 
- *    the apps directory (application code) you must include an acknowledgement:
- *    "This product includes software written by Tim Hudson (tjh@cryptsoft.com)"
- * 
- * THIS SOFTWARE IS PROVIDED BY ERIC YOUNG ``AS IS'' AND
- * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
- * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
- * ARE DISCLAIMED.  IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE
- * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
- * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
- * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
- * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
- * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
- * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
- * SUCH DAMAGE.
- * 
- * The licence and distribution terms for any publically available version or
- * derivative of this code cannot be changed.  i.e. this code cannot simply be
- * copied and put under another distribution licence
- * [including the GNU Public Licence.]
- */
-
-#include <string.h>
-#include <openssl/des.h>
-#include <openssl/ui.h>
-#include <openssl/crypto.h>
-
-int DES_read_password(DES_cblock *key, const char *prompt, int verify)
-	{
-	int ok;
-	char buf[BUFSIZ],buff[BUFSIZ];
-
-	if ((ok=UI_UTIL_read_pw(buf,buff,BUFSIZ,prompt,verify)) == 0)
-		DES_string_to_key(buf,key);
-	OPENSSL_cleanse(buf,BUFSIZ);
-	OPENSSL_cleanse(buff,BUFSIZ);
-	return(ok);
-	}
-
-int DES_read_2passwords(DES_cblock *key1, DES_cblock *key2, const char *prompt,
-	     int verify)
-	{
-	int ok;
-	char buf[BUFSIZ],buff[BUFSIZ];
-
-	if ((ok=UI_UTIL_read_pw(buf,buff,BUFSIZ,prompt,verify)) == 0)
-		DES_string_to_2keys(buf,key1,key2);
-	OPENSSL_cleanse(buf,BUFSIZ);
-	OPENSSL_cleanse(buff,BUFSIZ);
-	return(ok);
-	}
diff --git a/crypto/openssl/crypto/des/read_pwd.c b/crypto/openssl/crypto/des/read_pwd.c
deleted file mode 100644
index ce5fa00a37a4..000000000000
--- a/crypto/openssl/crypto/des/read_pwd.c
+++ /dev/null
@@ -1,521 +0,0 @@
-/* crypto/des/read_pwd.c */
-/* Copyright (C) 1995-1998 Eric Young (eay@cryptsoft.com)
- * All rights reserved.
- *
- * This package is an SSL implementation written
- * by Eric Young (eay@cryptsoft.com).
- * The implementation was written so as to conform with Netscapes SSL.
- * 
- * This library is free for commercial and non-commercial use as long as
- * the following conditions are aheared to.  The following conditions
- * apply to all code found in this distribution, be it the RC4, RSA,
- * lhash, DES, etc., code; not just the SSL code.  The SSL documentation
- * included with this distribution is covered by the same copyright terms
- * except that the holder is Tim Hudson (tjh@cryptsoft.com).
- * 
- * Copyright remains Eric Young's, and as such any Copyright notices in
- * the code are not to be removed.
- * If this package is used in a product, Eric Young should be given attribution
- * as the author of the parts of the library used.
- * This can be in the form of a textual message at program startup or
- * in documentation (online or textual) provided with the package.
- * 
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions
- * are met:
- * 1. Redistributions of source code must retain the copyright
- *    notice, this list of conditions and the following disclaimer.
- * 2. Redistributions in binary form must reproduce the above copyright
- *    notice, this list of conditions and the following disclaimer in the
- *    documentation and/or other materials provided with the distribution.
- * 3. All advertising materials mentioning features or use of this software
- *    must display the following acknowledgement:
- *    "This product includes cryptographic software written by
- *     Eric Young (eay@cryptsoft.com)"
- *    The word 'cryptographic' can be left out if the rouines from the library
- *    being used are not cryptographic related :-).
- * 4. If you include any Windows specific code (or a derivative thereof) from 
- *    the apps directory (application code) you must include an acknowledgement:
- *    "This product includes software written by Tim Hudson (tjh@cryptsoft.com)"
- * 
- * THIS SOFTWARE IS PROVIDED BY ERIC YOUNG ``AS IS'' AND
- * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
- * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
- * ARE DISCLAIMED.  IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE
- * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
- * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
- * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
- * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
- * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
- * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
- * SUCH DAMAGE.
- * 
- * The licence and distribution terms for any publically available version or
- * derivative of this code cannot be changed.  i.e. this code cannot simply be
- * copied and put under another distribution licence
- * [including the GNU Public Licence.]
- */
-
-#include <openssl/e_os2.h>
-#if !defined(OPENSSL_SYS_MSDOS) && !defined(OPENSSL_SYS_VMS) && !defined(OPENSSL_SYS_WIN32)
-#ifdef OPENSSL_UNISTD
-# include OPENSSL_UNISTD
-#else
-# include <unistd.h>
-#endif
-/* If unistd.h defines _POSIX_VERSION, we conclude that we
- * are on a POSIX system and have sigaction and termios. */
-#if defined(_POSIX_VERSION)
-
-# define SIGACTION
-# if !defined(TERMIOS) && !defined(TERMIO) && !defined(SGTTY)
-# define TERMIOS
-# endif
-
-#endif
-#endif
-
-/* #define SIGACTION */ /* Define this if you have sigaction() */
-
-#ifdef WIN16TTY
-#undef OPENSSL_SYS_WIN16
-#undef _WINDOWS
-#include <graph.h>
-#endif
-
-/* 06-Apr-92 Luke Brennan    Support for VMS */
-#include "des_locl.h"
-#include "cryptlib.h"
-#include <signal.h>
-#include <stdio.h>
-#include <string.h>
-#include <setjmp.h>
-#include <errno.h>
-
-#ifdef OPENSSL_SYS_VMS			/* prototypes for sys$whatever */
-#include <starlet.h>
-#ifdef __DECC
-#pragma message disable DOLLARID
-#endif
-#endif
-
-#ifdef WIN_CONSOLE_BUG
-#include <windows.h>
-#ifndef OPENSSL_SYS_WINCE
-#include <wincon.h>
-#endif
-#endif
-
-
-/* There are 5 types of terminal interface supported,
- * TERMIO, TERMIOS, VMS, MSDOS and SGTTY
- */
-
-#if defined(__sgi) && !defined(TERMIOS)
-#define TERMIOS
-#undef  TERMIO
-#undef  SGTTY
-#endif
-
-#if defined(linux) && !defined(TERMIO)
-#undef  TERMIOS
-#define TERMIO
-#undef  SGTTY
-#endif
-
-#ifdef _LIBC
-#undef  TERMIOS
-#define TERMIO
-#undef  SGTTY
-#endif
-
-#if !defined(TERMIO) && !defined(TERMIOS) && !defined(OPENSSL_SYS_VMS) && !defined(OPENSSL_SYS_MSDOS) && !defined(MAC_OS_pre_X) && !defined(MAC_OS_GUSI_SOURCE)
-#undef  TERMIOS
-#undef  TERMIO
-#define SGTTY
-#endif
-
-#if defined(OPENSSL_SYS_VXWORKS)
-#undef TERMIOS
-#undef TERMIO
-#undef SGTTY
-#endif
-
-#ifdef TERMIOS
-#include <termios.h>
-#define TTY_STRUCT		struct termios
-#define TTY_FLAGS		c_lflag
-#define	TTY_get(tty,data)	tcgetattr(tty,data)
-#define TTY_set(tty,data)	tcsetattr(tty,TCSANOW,data)
-#endif
-
-#ifdef TERMIO
-#include <termio.h>
-#define TTY_STRUCT		struct termio
-#define TTY_FLAGS		c_lflag
-#define TTY_get(tty,data)	ioctl(tty,TCGETA,data)
-#define TTY_set(tty,data)	ioctl(tty,TCSETA,data)
-#endif
-
-#ifdef SGTTY
-#include <sgtty.h>
-#define TTY_STRUCT		struct sgttyb
-#define TTY_FLAGS		sg_flags
-#define TTY_get(tty,data)	ioctl(tty,TIOCGETP,data)
-#define TTY_set(tty,data)	ioctl(tty,TIOCSETP,data)
-#endif
-
-#if !defined(_LIBC) && !defined(OPENSSL_SYS_MSDOS) && !defined(OPENSSL_SYS_VMS) && !defined(MAC_OS_pre_X)
-#include <sys/ioctl.h>
-#endif
-
-#if defined(OPENSSL_SYS_MSDOS) && !defined(__CYGWIN32__) && !defined(OPENSSL_SYS_WINCE)
-#include <conio.h>
-#define fgets(a,b,c) noecho_fgets(a,b,c)
-#endif
-
-#ifdef OPENSSL_SYS_VMS
-#include <ssdef.h>
-#include <iodef.h>
-#include <ttdef.h>
-#include <descrip.h>
-struct IOSB {
-	short iosb$w_value;
-	short iosb$w_count;
-	long  iosb$l_info;
-	};
-#endif
-
-#if defined(MAC_OS_pre_X) || defined(MAC_OS_GUSI_SOURCE)
-/*
- * This one needs work. As a matter of fact the code is unoperational
- * and this is only a trick to get it compiled.
- *					<appro@fy.chalmers.se>
- */
-#define TTY_STRUCT int
-#endif
-
-#ifndef NX509_SIG
-#define NX509_SIG 32
-#endif
-
-static void read_till_nl(FILE *);
-static void recsig(int);
-static void pushsig(void);
-static void popsig(void);
-#if defined(OPENSSL_SYS_MSDOS) && !defined(OPENSSL_SYS_WIN16)
-static int noecho_fgets(char *buf, int size, FILE *tty);
-#endif
-#ifdef SIGACTION
- static struct sigaction savsig[NX509_SIG];
-#else
-  static void (*savsig[NX509_SIG])(int );
-#endif
-static jmp_buf save;
-
-int des_read_pw_string(char *buf, int length, const char *prompt,
-	     int verify)
-	{
-	char buff[BUFSIZ];
-	int ret;
-
-	ret=des_read_pw(buf,buff,(length>BUFSIZ)?BUFSIZ:length,prompt,verify);
-	OPENSSL_cleanse(buff,BUFSIZ);
-	return(ret);
-	}
-
-#ifdef OPENSSL_SYS_WINCE
-
-int des_read_pw(char *buf, char *buff, int size, const char *prompt, int verify)
-	{ 
-	memset(buf,0,size);
-	memset(buff,0,size);
-	return(0);
-	}
-
-#elif defined(OPENSSL_SYS_WIN16)
-
-int des_read_pw(char *buf, char *buff, int size, char *prompt, int verify)
-	{ 
-	memset(buf,0,size);
-	memset(buff,0,size);
-	return(0);
-	}
-
-#else /* !OPENSSL_SYS_WINCE && !OPENSSL_SYS_WIN16 */
-
-static void read_till_nl(FILE *in)
-	{
-#define SIZE 4
-	char buf[SIZE+1];
-
-	do	{
-		fgets(buf,SIZE,in);
-		} while (strchr(buf,'\n') == NULL);
-	}
-
-
-/* return 0 if ok, 1 (or -1) otherwise */
-int des_read_pw(char *buf, char *buff, int size, const char *prompt,
-	     int verify)
-	{
-#ifdef OPENSSL_SYS_VMS
-	struct IOSB iosb;
-	$DESCRIPTOR(terminal,"TT");
-	long tty_orig[3], tty_new[3];
-	long status;
-	unsigned short channel = 0;
-#else
-#if !defined(OPENSSL_SYS_MSDOS) || defined(__DJGPP__)
-	TTY_STRUCT tty_orig,tty_new;
-#endif
-#endif
-	int number;
-	int ok;
-	/* statics are simply to avoid warnings about longjmp clobbering
-	   things */
-	static int ps;
-	int is_a_tty;
-	static FILE *tty;
-	char *p;
-
-	if (setjmp(save))
-		{
-		ok=0;
-		goto error;
-		}
-
-	number=5;
-	ok=0;
-	ps=0;
-	is_a_tty=1;
-	tty=NULL;
-
-#ifdef OPENSSL_SYS_MSDOS
-	if ((tty=fopen("con","r")) == NULL)
-		tty=stdin;
-#elif defined(MAC_OS_pre_X) || defined(OPENSSL_SYS_VXWORKS)
-	tty=stdin;
-#else
-#ifndef OPENSSL_SYS_MPE
-	if ((tty=fopen("/dev/tty","r")) == NULL)
-#endif
-		tty=stdin;
-#endif
-
-#if defined(TTY_get) && !defined(OPENSSL_SYS_VMS)
-	if (TTY_get(fileno(tty),&tty_orig) == -1)
-		{
-#ifdef ENOTTY
-		if (errno == ENOTTY)
-			is_a_tty=0;
-		else
-#endif
-#ifdef EINVAL
-		/* Ariel Glenn ariel@columbia.edu reports that solaris
-		 * can return EINVAL instead.  This should be ok */
-		if (errno == EINVAL)
-			is_a_tty=0;
-		else
-#endif
-			return(-1);
-		}
-	memcpy(&(tty_new),&(tty_orig),sizeof(tty_orig));
-#endif
-#ifdef OPENSSL_SYS_VMS
-	status = sys$assign(&terminal,&channel,0,0);
-	if (status != SS$_NORMAL)
-		return(-1);
-	status=sys$qiow(0,channel,IO$_SENSEMODE,&iosb,0,0,tty_orig,12,0,0,0,0);
-	if ((status != SS$_NORMAL) || (iosb.iosb$w_value != SS$_NORMAL))
-		return(-1);
-#endif
-
-	pushsig();
-	ps=1;
-
-#ifdef TTY_FLAGS
-	tty_new.TTY_FLAGS &= ~ECHO;
-#endif
-
-#if defined(TTY_set) && !defined(OPENSSL_SYS_VMS)
-	if (is_a_tty && (TTY_set(fileno(tty),&tty_new) == -1))
-#ifdef OPENSSL_SYS_MPE 
-		; /* MPE lies -- echo really has been disabled */
-#else
-		return(-1);
-#endif
-#endif
-#ifdef OPENSSL_SYS_VMS
-	tty_new[0] = tty_orig[0];
-	tty_new[1] = tty_orig[1] | TT$M_NOECHO;
-	tty_new[2] = tty_orig[2];
-	status = sys$qiow(0,channel,IO$_SETMODE,&iosb,0,0,tty_new,12,0,0,0,0);
-	if ((status != SS$_NORMAL) || (iosb.iosb$w_value != SS$_NORMAL))
-		return(-1);
-#endif
-	ps=2;
-
-	while ((!ok) && (number--))
-		{
-		fputs(prompt,stderr);
-		fflush(stderr);
-
-		buf[0]='\0';
-		fgets(buf,size,tty);
-		if (feof(tty)) goto error;
-		if (ferror(tty)) goto error;
-		if ((p=(char *)strchr(buf,'\n')) != NULL)
-			*p='\0';
-		else	read_till_nl(tty);
-		if (verify)
-			{
-			fprintf(stderr,"\nVerifying password - %s",prompt);
-			fflush(stderr);
-			buff[0]='\0';
-			fgets(buff,size,tty);
-			if (feof(tty)) goto error;
-			if ((p=(char *)strchr(buff,'\n')) != NULL)
-				*p='\0';
-			else	read_till_nl(tty);
-				
-			if (strcmp(buf,buff) != 0)
-				{
-				fprintf(stderr,"\nVerify failure");
-				fflush(stderr);
-				break;
-				/* continue; */
-				}
-			}
-		ok=1;
-		}
-
-error:
-	fprintf(stderr,"\n");
-#if 0
-	perror("fgets(tty)");
-#endif
-	/* What can we do if there is an error? */
-#if defined(TTY_set) && !defined(OPENSSL_SYS_VMS)
-	if (ps >= 2) TTY_set(fileno(tty),&tty_orig);
-#endif
-#ifdef OPENSSL_SYS_VMS
-	if (ps >= 2)
-		status = sys$qiow(0,channel,IO$_SETMODE,&iosb,0,0
-			,tty_orig,12,0,0,0,0);
-#endif
-	
-	if (ps >= 1) popsig();
-	if (stdin != tty) fclose(tty);
-#ifdef OPENSSL_SYS_VMS
-	status = sys$dassgn(channel);
-#endif
-	return(!ok);
-	}
-
-static void pushsig(void)
-	{
-	int i;
-#ifdef SIGACTION
-	struct sigaction sa;
-
-	memset(&sa,0,sizeof sa);
-	sa.sa_handler=recsig;
-#endif
-
-	for (i=1; i<NX509_SIG; i++)
-		{
-#ifdef SIGUSR1
-		if (i == SIGUSR1)
-			continue;
-#endif
-#ifdef SIGUSR2
-		if (i == SIGUSR2)
-			continue;
-#endif
-#ifdef SIGACTION
-		sigaction(i,&sa,&savsig[i]);
-#else
-		savsig[i]=signal(i,recsig);
-#endif
-		}
-
-#ifdef SIGWINCH
-	signal(SIGWINCH,SIG_DFL);
-#endif
-	}
-
-static void popsig(void)
-	{
-	int i;
-
-	for (i=1; i<NX509_SIG; i++)
-		{
-#ifdef SIGUSR1
-		if (i == SIGUSR1)
-			continue;
-#endif
-#ifdef SIGUSR2
-		if (i == SIGUSR2)
-			continue;
-#endif
-#ifdef SIGACTION
-		sigaction(i,&savsig[i],NULL);
-#else
-		signal(i,savsig[i]);
-#endif
-		}
-	}
-
-static void recsig(int i)
-	{
-	longjmp(save,1);
-#ifdef LINT
-	i=i;
-#endif
-	}
-
-#ifdef OPENSSL_SYS_MSDOS
-static int noecho_fgets(char *buf, int size, FILE *tty)
-	{
-	int i;
-	char *p;
-
-	p=buf;
-	for (;;)
-		{
-		if (size == 0)
-			{
-			*p='\0';
-			break;
-			}
-		size--;
-#ifdef WIN16TTY
-		i=_inchar();
-#else
-		i=getch();
-#endif
-		if (i == '\r') i='\n';
-		*(p++)=i;
-		if (i == '\n')
-			{
-			*p='\0';
-			break;
-			}
-		}
-#ifdef WIN_CONSOLE_BUG
-/* Win95 has several evil console bugs: one of these is that the
- * last character read using getch() is passed to the next read: this is
- * usually a CR so this can be trouble. No STDIO fix seems to work but
- * flushing the console appears to do the trick.
- */
-		{
-			HANDLE inh;
-			inh = GetStdHandle(STD_INPUT_HANDLE);
-			FlushConsoleInputBuffer(inh);
-		}
-#endif
-	return(strlen(buf));
-	}
-#endif
-#endif /* !OPENSSL_SYS_WINCE && !WIN16 */
diff --git a/crypto/openssl/crypto/des/rpc_des.h b/crypto/openssl/crypto/des/rpc_des.h
deleted file mode 100644
index 4cbb4d2dcdea..000000000000
--- a/crypto/openssl/crypto/des/rpc_des.h
+++ /dev/null
@@ -1,131 +0,0 @@
-/* crypto/des/rpc_des.h */
-/* Copyright (C) 1995-1998 Eric Young (eay@cryptsoft.com)
- * All rights reserved.
- *
- * This package is an SSL implementation written
- * by Eric Young (eay@cryptsoft.com).
- * The implementation was written so as to conform with Netscapes SSL.
- * 
- * This library is free for commercial and non-commercial use as long as
- * the following conditions are aheared to.  The following conditions
- * apply to all code found in this distribution, be it the RC4, RSA,
- * lhash, DES, etc., code; not just the SSL code.  The SSL documentation
- * included with this distribution is covered by the same copyright terms
- * except that the holder is Tim Hudson (tjh@cryptsoft.com).
- * 
- * Copyright remains Eric Young's, and as such any Copyright notices in
- * the code are not to be removed.
- * If this package is used in a product, Eric Young should be given attribution
- * as the author of the parts of the library used.
- * This can be in the form of a textual message at program startup or
- * in documentation (online or textual) provided with the package.
- * 
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions
- * are met:
- * 1. Redistributions of source code must retain the copyright
- *    notice, this list of conditions and the following disclaimer.
- * 2. Redistributions in binary form must reproduce the above copyright
- *    notice, this list of conditions and the following disclaimer in the
- *    documentation and/or other materials provided with the distribution.
- * 3. All advertising materials mentioning features or use of this software
- *    must display the following acknowledgement:
- *    "This product includes cryptographic software written by
- *     Eric Young (eay@cryptsoft.com)"
- *    The word 'cryptographic' can be left out if the rouines from the library
- *    being used are not cryptographic related :-).
- * 4. If you include any Windows specific code (or a derivative thereof) from 
- *    the apps directory (application code) you must include an acknowledgement:
- *    "This product includes software written by Tim Hudson (tjh@cryptsoft.com)"
- * 
- * THIS SOFTWARE IS PROVIDED BY ERIC YOUNG ``AS IS'' AND
- * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
- * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
- * ARE DISCLAIMED.  IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE
- * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
- * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
- * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
- * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
- * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
- * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
- * SUCH DAMAGE.
- * 
- * The licence and distribution terms for any publically available version or
- * derivative of this code cannot be changed.  i.e. this code cannot simply be
- * copied and put under another distribution licence
- * [including the GNU Public Licence.]
- */
-
-/*  @(#)des.h	2.2 88/08/10 4.0 RPCSRC; from 2.7 88/02/08 SMI  */
-/*
- * Sun RPC is a product of Sun Microsystems, Inc. and is provided for
- * unrestricted use provided that this legend is included on all tape
- * media and as a part of the software program in whole or part.  Users
- * may copy or modify Sun RPC without charge, but are not authorized
- * to license or distribute it to anyone else except as part of a product or
- * program developed by the user.
- * 
- * SUN RPC IS PROVIDED AS IS WITH NO WARRANTIES OF ANY KIND INCLUDING THE
- * WARRANTIES OF DESIGN, MERCHANTIBILITY AND FITNESS FOR A PARTICULAR
- * PURPOSE, OR ARISING FROM A COURSE OF DEALING, USAGE OR TRADE PRACTICE.
- * 
- * Sun RPC is provided with no support and without any obligation on the
- * part of Sun Microsystems, Inc. to assist in its use, correction,
- * modification or enhancement.
- * 
- * SUN MICROSYSTEMS, INC. SHALL HAVE NO LIABILITY WITH RESPECT TO THE
- * INFRINGEMENT OF COPYRIGHTS, TRADE SECRETS OR ANY PATENTS BY SUN RPC
- * OR ANY PART THEREOF.
- * 
- * In no event will Sun Microsystems, Inc. be liable for any lost revenue
- * or profits or other special, indirect and consequential damages, even if
- * Sun has been advised of the possibility of such damages.
- * 
- * Sun Microsystems, Inc.
- * 2550 Garcia Avenue
- * Mountain View, California  94043
- */
-/*
- * Generic DES driver interface
- * Keep this file hardware independent!
- * Copyright (c) 1986 by Sun Microsystems, Inc.
- */
-
-#define DES_MAXLEN 	65536	/* maximum # of bytes to encrypt  */
-#define DES_QUICKLEN	16	/* maximum # of bytes to encrypt quickly */
-
-#ifdef HEADER_DES_H
-#undef ENCRYPT
-#undef DECRYPT
-#endif
-
-enum desdir { ENCRYPT, DECRYPT };
-enum desmode { CBC, ECB };
-
-/*
- * parameters to ioctl call
- */
-struct desparams {
-	unsigned char des_key[8];	/* key (with low bit parity) */
-	enum desdir des_dir;	/* direction */
-	enum desmode des_mode;	/* mode */
-	unsigned char des_ivec[8];	/* input vector */
-	unsigned des_len;	/* number of bytes to crypt */
-	union {
-		unsigned char UDES_data[DES_QUICKLEN];
-		unsigned char *UDES_buf;
-	} UDES;
-#	define des_data UDES.UDES_data	/* direct data here if quick */
-#	define des_buf	UDES.UDES_buf	/* otherwise, pointer to data */
-};
-
-/*
- * Encrypt an arbitrary sized buffer
- */
-#define	DESIOCBLOCK	_IOWR(d, 6, struct desparams)
-
-/* 
- * Encrypt of small amount of data, quickly
- */
-#define DESIOCQUICK	_IOWR(d, 7, struct desparams) 
-
diff --git a/crypto/openssl/crypto/des/rpc_enc.c b/crypto/openssl/crypto/des/rpc_enc.c
deleted file mode 100644
index d937d08da5ff..000000000000
--- a/crypto/openssl/crypto/des/rpc_enc.c
+++ /dev/null
@@ -1,98 +0,0 @@
-/* crypto/des/rpc_enc.c */
-/* Copyright (C) 1995-1998 Eric Young (eay@cryptsoft.com)
- * All rights reserved.
- *
- * This package is an SSL implementation written
- * by Eric Young (eay@cryptsoft.com).
- * The implementation was written so as to conform with Netscapes SSL.
- * 
- * This library is free for commercial and non-commercial use as long as
- * the following conditions are aheared to.  The following conditions
- * apply to all code found in this distribution, be it the RC4, RSA,
- * lhash, DES, etc., code; not just the SSL code.  The SSL documentation
- * included with this distribution is covered by the same copyright terms
- * except that the holder is Tim Hudson (tjh@cryptsoft.com).
- * 
- * Copyright remains Eric Young's, and as such any Copyright notices in
- * the code are not to be removed.
- * If this package is used in a product, Eric Young should be given attribution
- * as the author of the parts of the library used.
- * This can be in the form of a textual message at program startup or
- * in documentation (online or textual) provided with the package.
- * 
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions
- * are met:
- * 1. Redistributions of source code must retain the copyright
- *    notice, this list of conditions and the following disclaimer.
- * 2. Redistributions in binary form must reproduce the above copyright
- *    notice, this list of conditions and the following disclaimer in the
- *    documentation and/or other materials provided with the distribution.
- * 3. All advertising materials mentioning features or use of this software
- *    must display the following acknowledgement:
- *    "This product includes cryptographic software written by
- *     Eric Young (eay@cryptsoft.com)"
- *    The word 'cryptographic' can be left out if the rouines from the library
- *    being used are not cryptographic related :-).
- * 4. If you include any Windows specific code (or a derivative thereof) from 
- *    the apps directory (application code) you must include an acknowledgement:
- *    "This product includes software written by Tim Hudson (tjh@cryptsoft.com)"
- * 
- * THIS SOFTWARE IS PROVIDED BY ERIC YOUNG ``AS IS'' AND
- * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
- * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
- * ARE DISCLAIMED.  IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE
- * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
- * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
- * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
- * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
- * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
- * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
- * SUCH DAMAGE.
- * 
- * The licence and distribution terms for any publically available version or
- * derivative of this code cannot be changed.  i.e. this code cannot simply be
- * copied and put under another distribution licence
- * [including the GNU Public Licence.]
- */
-
-#include "rpc_des.h"
-#include "des_locl.h"
-#include "des_ver.h"
-
-int _des_crypt(char *buf,int len,struct desparams *desp);
-int _des_crypt(char *buf, int len, struct desparams *desp)
-	{
-	DES_key_schedule ks;
-	int enc;
-
-	DES_set_key_unchecked(&desp->des_key,&ks);
-	enc=(desp->des_dir == ENCRYPT)?DES_ENCRYPT:DES_DECRYPT;
-
-	if (desp->des_mode == CBC)
-		DES_ecb_encrypt((const_DES_cblock *)desp->UDES.UDES_buf,
-				(DES_cblock *)desp->UDES.UDES_buf,&ks,
-				enc);
-	else
-		{
-		DES_ncbc_encrypt(desp->UDES.UDES_buf,desp->UDES.UDES_buf,
-				len,&ks,&desp->des_ivec,enc);
-#ifdef undef
-		/* len will always be %8 if called from common_crypt
-		 * in secure_rpc.
-		 * Libdes's cbc encrypt does not copy back the iv,
-		 * so we have to do it here. */
-		/* It does now :-) eay 20/09/95 */
-
-		a=(char *)&(desp->UDES.UDES_buf[len-8]);
-		b=(char *)&(desp->des_ivec[0]);
-
-		*(a++)= *(b++); *(a++)= *(b++);
-		*(a++)= *(b++); *(a++)= *(b++);
-		*(a++)= *(b++); *(a++)= *(b++);
-		*(a++)= *(b++); *(a++)= *(b++);
-#endif
-		}
-	return(1);	
-	}
-
diff --git a/crypto/openssl/crypto/des/rpw.c b/crypto/openssl/crypto/des/rpw.c
deleted file mode 100644
index 8a9473c4f905..000000000000
--- a/crypto/openssl/crypto/des/rpw.c
+++ /dev/null
@@ -1,99 +0,0 @@
-/* crypto/des/rpw.c */
-/* Copyright (C) 1995-1998 Eric Young (eay@cryptsoft.com)
- * All rights reserved.
- *
- * This package is an SSL implementation written
- * by Eric Young (eay@cryptsoft.com).
- * The implementation was written so as to conform with Netscapes SSL.
- * 
- * This library is free for commercial and non-commercial use as long as
- * the following conditions are aheared to.  The following conditions
- * apply to all code found in this distribution, be it the RC4, RSA,
- * lhash, DES, etc., code; not just the SSL code.  The SSL documentation
- * included with this distribution is covered by the same copyright terms
- * except that the holder is Tim Hudson (tjh@cryptsoft.com).
- * 
- * Copyright remains Eric Young's, and as such any Copyright notices in
- * the code are not to be removed.
- * If this package is used in a product, Eric Young should be given attribution
- * as the author of the parts of the library used.
- * This can be in the form of a textual message at program startup or
- * in documentation (online or textual) provided with the package.
- * 
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions
- * are met:
- * 1. Redistributions of source code must retain the copyright
- *    notice, this list of conditions and the following disclaimer.
- * 2. Redistributions in binary form must reproduce the above copyright
- *    notice, this list of conditions and the following disclaimer in the
- *    documentation and/or other materials provided with the distribution.
- * 3. All advertising materials mentioning features or use of this software
- *    must display the following acknowledgement:
- *    "This product includes cryptographic software written by
- *     Eric Young (eay@cryptsoft.com)"
- *    The word 'cryptographic' can be left out if the rouines from the library
- *    being used are not cryptographic related :-).
- * 4. If you include any Windows specific code (or a derivative thereof) from 
- *    the apps directory (application code) you must include an acknowledgement:
- *    "This product includes software written by Tim Hudson (tjh@cryptsoft.com)"
- * 
- * THIS SOFTWARE IS PROVIDED BY ERIC YOUNG ``AS IS'' AND
- * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
- * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
- * ARE DISCLAIMED.  IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE
- * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
- * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
- * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
- * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
- * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
- * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
- * SUCH DAMAGE.
- * 
- * The licence and distribution terms for any publically available version or
- * derivative of this code cannot be changed.  i.e. this code cannot simply be
- * copied and put under another distribution licence
- * [including the GNU Public Licence.]
- */
-
-#include <stdio.h>
-#include <openssl/des.h>
-
-int main(int argc, char *argv[])
-	{
-	DES_cblock k,k1;
-	int i;
-
-	printf("read passwd\n");
-	if ((i=des_read_password(&k,"Enter password:",0)) == 0)
-		{
-		printf("password = ");
-		for (i=0; i<8; i++)
-			printf("%02x ",k[i]);
-		}
-	else
-		printf("error %d\n",i);
-	printf("\n");
-	printf("read 2passwds and verify\n");
-	if ((i=des_read_2passwords(&k,&k1,
-		"Enter verified password:",1)) == 0)
-		{
-		printf("password1 = ");
-		for (i=0; i<8; i++)
-			printf("%02x ",k[i]);
-		printf("\n");
-		printf("password2 = ");
-		for (i=0; i<8; i++)
-			printf("%02x ",k1[i]);
-		printf("\n");
-		exit(1);
-		}
-	else
-		{
-		printf("error %d\n",i);
-		exit(0);
-		}
-#ifdef LINT
-	return(0);
-#endif
-	}
diff --git a/crypto/openssl/crypto/des/set_key.c b/crypto/openssl/crypto/des/set_key.c
deleted file mode 100644
index 55efe03f4233..000000000000
--- a/crypto/openssl/crypto/des/set_key.c
+++ /dev/null
@@ -1,407 +0,0 @@
-/* crypto/des/set_key.c */
-/* Copyright (C) 1995-1998 Eric Young (eay@cryptsoft.com)
- * All rights reserved.
- *
- * This package is an SSL implementation written
- * by Eric Young (eay@cryptsoft.com).
- * The implementation was written so as to conform with Netscapes SSL.
- * 
- * This library is free for commercial and non-commercial use as long as
- * the following conditions are aheared to.  The following conditions
- * apply to all code found in this distribution, be it the RC4, RSA,
- * lhash, DES, etc., code; not just the SSL code.  The SSL documentation
- * included with this distribution is covered by the same copyright terms
- * except that the holder is Tim Hudson (tjh@cryptsoft.com).
- * 
- * Copyright remains Eric Young's, and as such any Copyright notices in
- * the code are not to be removed.
- * If this package is used in a product, Eric Young should be given attribution
- * as the author of the parts of the library used.
- * This can be in the form of a textual message at program startup or
- * in documentation (online or textual) provided with the package.
- * 
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions
- * are met:
- * 1. Redistributions of source code must retain the copyright
- *    notice, this list of conditions and the following disclaimer.
- * 2. Redistributions in binary form must reproduce the above copyright
- *    notice, this list of conditions and the following disclaimer in the
- *    documentation and/or other materials provided with the distribution.
- * 3. All advertising materials mentioning features or use of this software
- *    must display the following acknowledgement:
- *    "This product includes cryptographic software written by
- *     Eric Young (eay@cryptsoft.com)"
- *    The word 'cryptographic' can be left out if the rouines from the library
- *    being used are not cryptographic related :-).
- * 4. If you include any Windows specific code (or a derivative thereof) from 
- *    the apps directory (application code) you must include an acknowledgement:
- *    "This product includes software written by Tim Hudson (tjh@cryptsoft.com)"
- * 
- * THIS SOFTWARE IS PROVIDED BY ERIC YOUNG ``AS IS'' AND
- * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
- * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
- * ARE DISCLAIMED.  IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE
- * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
- * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
- * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
- * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
- * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
- * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
- * SUCH DAMAGE.
- * 
- * The licence and distribution terms for any publically available version or
- * derivative of this code cannot be changed.  i.e. this code cannot simply be
- * copied and put under another distribution licence
- * [including the GNU Public Licence.]
- */
-
-/* set_key.c v 1.4 eay 24/9/91
- * 1.4 Speed up by 400% :-)
- * 1.3 added register declarations.
- * 1.2 unrolled make_key_sched a bit more
- * 1.1 added norm_expand_bits
- * 1.0 First working version
- */
-#include "des_locl.h"
-
-OPENSSL_IMPLEMENT_GLOBAL(int,DES_check_key);	/* defaults to false */
-
-static const unsigned char odd_parity[256]={
-  1,  1,  2,  2,  4,  4,  7,  7,  8,  8, 11, 11, 13, 13, 14, 14,
- 16, 16, 19, 19, 21, 21, 22, 22, 25, 25, 26, 26, 28, 28, 31, 31,
- 32, 32, 35, 35, 37, 37, 38, 38, 41, 41, 42, 42, 44, 44, 47, 47,
- 49, 49, 50, 50, 52, 52, 55, 55, 56, 56, 59, 59, 61, 61, 62, 62,
- 64, 64, 67, 67, 69, 69, 70, 70, 73, 73, 74, 74, 76, 76, 79, 79,
- 81, 81, 82, 82, 84, 84, 87, 87, 88, 88, 91, 91, 93, 93, 94, 94,
- 97, 97, 98, 98,100,100,103,103,104,104,107,107,109,109,110,110,
-112,112,115,115,117,117,118,118,121,121,122,122,124,124,127,127,
-128,128,131,131,133,133,134,134,137,137,138,138,140,140,143,143,
-145,145,146,146,148,148,151,151,152,152,155,155,157,157,158,158,
-161,161,162,162,164,164,167,167,168,168,171,171,173,173,174,174,
-176,176,179,179,181,181,182,182,185,185,186,186,188,188,191,191,
-193,193,194,194,196,196,199,199,200,200,203,203,205,205,206,206,
-208,208,211,211,213,213,214,214,217,217,218,218,220,220,223,223,
-224,224,227,227,229,229,230,230,233,233,234,234,236,236,239,239,
-241,241,242,242,244,244,247,247,248,248,251,251,253,253,254,254};
-
-void DES_set_odd_parity(DES_cblock *key)
-	{
-	unsigned int i;
-
-	for (i=0; i<DES_KEY_SZ; i++)
-		(*key)[i]=odd_parity[(*key)[i]];
-	}
-
-int DES_check_key_parity(const_DES_cblock *key)
-	{
-	unsigned int i;
-
-	for (i=0; i<DES_KEY_SZ; i++)
-		{
-		if ((*key)[i] != odd_parity[(*key)[i]])
-			return(0);
-		}
-	return(1);
-	}
-
-/* Weak and semi week keys as take from
- * %A D.W. Davies
- * %A W.L. Price
- * %T Security for Computer Networks
- * %I John Wiley & Sons
- * %D 1984
- * Many thanks to smb@ulysses.att.com (Steven Bellovin) for the reference
- * (and actual cblock values).
- */
-#define NUM_WEAK_KEY	16
-static DES_cblock weak_keys[NUM_WEAK_KEY]={
-	/* weak keys */
-	{0x01,0x01,0x01,0x01,0x01,0x01,0x01,0x01},
-	{0xFE,0xFE,0xFE,0xFE,0xFE,0xFE,0xFE,0xFE},
-	{0x1F,0x1F,0x1F,0x1F,0x0E,0x0E,0x0E,0x0E},
-	{0xE0,0xE0,0xE0,0xE0,0xF1,0xF1,0xF1,0xF1},
-	/* semi-weak keys */
-	{0x01,0xFE,0x01,0xFE,0x01,0xFE,0x01,0xFE},
-	{0xFE,0x01,0xFE,0x01,0xFE,0x01,0xFE,0x01},
-	{0x1F,0xE0,0x1F,0xE0,0x0E,0xF1,0x0E,0xF1},
-	{0xE0,0x1F,0xE0,0x1F,0xF1,0x0E,0xF1,0x0E},
-	{0x01,0xE0,0x01,0xE0,0x01,0xF1,0x01,0xF1},
-	{0xE0,0x01,0xE0,0x01,0xF1,0x01,0xF1,0x01},
-	{0x1F,0xFE,0x1F,0xFE,0x0E,0xFE,0x0E,0xFE},
-	{0xFE,0x1F,0xFE,0x1F,0xFE,0x0E,0xFE,0x0E},
-	{0x01,0x1F,0x01,0x1F,0x01,0x0E,0x01,0x0E},
-	{0x1F,0x01,0x1F,0x01,0x0E,0x01,0x0E,0x01},
-	{0xE0,0xFE,0xE0,0xFE,0xF1,0xFE,0xF1,0xFE},
-	{0xFE,0xE0,0xFE,0xE0,0xFE,0xF1,0xFE,0xF1}};
-
-int DES_is_weak_key(const_DES_cblock *key)
-	{
-	int i;
-
-	for (i=0; i<NUM_WEAK_KEY; i++)
-		/* Added == 0 to comparison, I obviously don't run
-		 * this section very often :-(, thanks to
-		 * engineering@MorningStar.Com for the fix
-		 * eay 93/06/29
-		 * Another problem, I was comparing only the first 4
-		 * bytes, 97/03/18 */
-		if (memcmp(weak_keys[i],key,sizeof(DES_cblock)) == 0) return(1);
-	return(0);
-	}
-
-/* NOW DEFINED IN des_local.h
- * See ecb_encrypt.c for a pseudo description of these macros. 
- * #define PERM_OP(a,b,t,n,m) ((t)=((((a)>>(n))^(b))&(m)),\
- * 	(b)^=(t),\
- * 	(a)=((a)^((t)<<(n))))
- */
-
-#define HPERM_OP(a,t,n,m) ((t)=((((a)<<(16-(n)))^(a))&(m)),\
-	(a)=(a)^(t)^(t>>(16-(n))))
-
-static const DES_LONG des_skb[8][64]={
-	{
-	/* for C bits (numbered as per FIPS 46) 1 2 3 4 5 6 */
-	0x00000000L,0x00000010L,0x20000000L,0x20000010L,
-	0x00010000L,0x00010010L,0x20010000L,0x20010010L,
-	0x00000800L,0x00000810L,0x20000800L,0x20000810L,
-	0x00010800L,0x00010810L,0x20010800L,0x20010810L,
-	0x00000020L,0x00000030L,0x20000020L,0x20000030L,
-	0x00010020L,0x00010030L,0x20010020L,0x20010030L,
-	0x00000820L,0x00000830L,0x20000820L,0x20000830L,
-	0x00010820L,0x00010830L,0x20010820L,0x20010830L,
-	0x00080000L,0x00080010L,0x20080000L,0x20080010L,
-	0x00090000L,0x00090010L,0x20090000L,0x20090010L,
-	0x00080800L,0x00080810L,0x20080800L,0x20080810L,
-	0x00090800L,0x00090810L,0x20090800L,0x20090810L,
-	0x00080020L,0x00080030L,0x20080020L,0x20080030L,
-	0x00090020L,0x00090030L,0x20090020L,0x20090030L,
-	0x00080820L,0x00080830L,0x20080820L,0x20080830L,
-	0x00090820L,0x00090830L,0x20090820L,0x20090830L,
-	},{
-	/* for C bits (numbered as per FIPS 46) 7 8 10 11 12 13 */
-	0x00000000L,0x02000000L,0x00002000L,0x02002000L,
-	0x00200000L,0x02200000L,0x00202000L,0x02202000L,
-	0x00000004L,0x02000004L,0x00002004L,0x02002004L,
-	0x00200004L,0x02200004L,0x00202004L,0x02202004L,
-	0x00000400L,0x02000400L,0x00002400L,0x02002400L,
-	0x00200400L,0x02200400L,0x00202400L,0x02202400L,
-	0x00000404L,0x02000404L,0x00002404L,0x02002404L,
-	0x00200404L,0x02200404L,0x00202404L,0x02202404L,
-	0x10000000L,0x12000000L,0x10002000L,0x12002000L,
-	0x10200000L,0x12200000L,0x10202000L,0x12202000L,
-	0x10000004L,0x12000004L,0x10002004L,0x12002004L,
-	0x10200004L,0x12200004L,0x10202004L,0x12202004L,
-	0x10000400L,0x12000400L,0x10002400L,0x12002400L,
-	0x10200400L,0x12200400L,0x10202400L,0x12202400L,
-	0x10000404L,0x12000404L,0x10002404L,0x12002404L,
-	0x10200404L,0x12200404L,0x10202404L,0x12202404L,
-	},{
-	/* for C bits (numbered as per FIPS 46) 14 15 16 17 19 20 */
-	0x00000000L,0x00000001L,0x00040000L,0x00040001L,
-	0x01000000L,0x01000001L,0x01040000L,0x01040001L,
-	0x00000002L,0x00000003L,0x00040002L,0x00040003L,
-	0x01000002L,0x01000003L,0x01040002L,0x01040003L,
-	0x00000200L,0x00000201L,0x00040200L,0x00040201L,
-	0x01000200L,0x01000201L,0x01040200L,0x01040201L,
-	0x00000202L,0x00000203L,0x00040202L,0x00040203L,
-	0x01000202L,0x01000203L,0x01040202L,0x01040203L,
-	0x08000000L,0x08000001L,0x08040000L,0x08040001L,
-	0x09000000L,0x09000001L,0x09040000L,0x09040001L,
-	0x08000002L,0x08000003L,0x08040002L,0x08040003L,
-	0x09000002L,0x09000003L,0x09040002L,0x09040003L,
-	0x08000200L,0x08000201L,0x08040200L,0x08040201L,
-	0x09000200L,0x09000201L,0x09040200L,0x09040201L,
-	0x08000202L,0x08000203L,0x08040202L,0x08040203L,
-	0x09000202L,0x09000203L,0x09040202L,0x09040203L,
-	},{
-	/* for C bits (numbered as per FIPS 46) 21 23 24 26 27 28 */
-	0x00000000L,0x00100000L,0x00000100L,0x00100100L,
-	0x00000008L,0x00100008L,0x00000108L,0x00100108L,
-	0x00001000L,0x00101000L,0x00001100L,0x00101100L,
-	0x00001008L,0x00101008L,0x00001108L,0x00101108L,
-	0x04000000L,0x04100000L,0x04000100L,0x04100100L,
-	0x04000008L,0x04100008L,0x04000108L,0x04100108L,
-	0x04001000L,0x04101000L,0x04001100L,0x04101100L,
-	0x04001008L,0x04101008L,0x04001108L,0x04101108L,
-	0x00020000L,0x00120000L,0x00020100L,0x00120100L,
-	0x00020008L,0x00120008L,0x00020108L,0x00120108L,
-	0x00021000L,0x00121000L,0x00021100L,0x00121100L,
-	0x00021008L,0x00121008L,0x00021108L,0x00121108L,
-	0x04020000L,0x04120000L,0x04020100L,0x04120100L,
-	0x04020008L,0x04120008L,0x04020108L,0x04120108L,
-	0x04021000L,0x04121000L,0x04021100L,0x04121100L,
-	0x04021008L,0x04121008L,0x04021108L,0x04121108L,
-	},{
-	/* for D bits (numbered as per FIPS 46) 1 2 3 4 5 6 */
-	0x00000000L,0x10000000L,0x00010000L,0x10010000L,
-	0x00000004L,0x10000004L,0x00010004L,0x10010004L,
-	0x20000000L,0x30000000L,0x20010000L,0x30010000L,
-	0x20000004L,0x30000004L,0x20010004L,0x30010004L,
-	0x00100000L,0x10100000L,0x00110000L,0x10110000L,
-	0x00100004L,0x10100004L,0x00110004L,0x10110004L,
-	0x20100000L,0x30100000L,0x20110000L,0x30110000L,
-	0x20100004L,0x30100004L,0x20110004L,0x30110004L,
-	0x00001000L,0x10001000L,0x00011000L,0x10011000L,
-	0x00001004L,0x10001004L,0x00011004L,0x10011004L,
-	0x20001000L,0x30001000L,0x20011000L,0x30011000L,
-	0x20001004L,0x30001004L,0x20011004L,0x30011004L,
-	0x00101000L,0x10101000L,0x00111000L,0x10111000L,
-	0x00101004L,0x10101004L,0x00111004L,0x10111004L,
-	0x20101000L,0x30101000L,0x20111000L,0x30111000L,
-	0x20101004L,0x30101004L,0x20111004L,0x30111004L,
-	},{
-	/* for D bits (numbered as per FIPS 46) 8 9 11 12 13 14 */
-	0x00000000L,0x08000000L,0x00000008L,0x08000008L,
-	0x00000400L,0x08000400L,0x00000408L,0x08000408L,
-	0x00020000L,0x08020000L,0x00020008L,0x08020008L,
-	0x00020400L,0x08020400L,0x00020408L,0x08020408L,
-	0x00000001L,0x08000001L,0x00000009L,0x08000009L,
-	0x00000401L,0x08000401L,0x00000409L,0x08000409L,
-	0x00020001L,0x08020001L,0x00020009L,0x08020009L,
-	0x00020401L,0x08020401L,0x00020409L,0x08020409L,
-	0x02000000L,0x0A000000L,0x02000008L,0x0A000008L,
-	0x02000400L,0x0A000400L,0x02000408L,0x0A000408L,
-	0x02020000L,0x0A020000L,0x02020008L,0x0A020008L,
-	0x02020400L,0x0A020400L,0x02020408L,0x0A020408L,
-	0x02000001L,0x0A000001L,0x02000009L,0x0A000009L,
-	0x02000401L,0x0A000401L,0x02000409L,0x0A000409L,
-	0x02020001L,0x0A020001L,0x02020009L,0x0A020009L,
-	0x02020401L,0x0A020401L,0x02020409L,0x0A020409L,
-	},{
-	/* for D bits (numbered as per FIPS 46) 16 17 18 19 20 21 */
-	0x00000000L,0x00000100L,0x00080000L,0x00080100L,
-	0x01000000L,0x01000100L,0x01080000L,0x01080100L,
-	0x00000010L,0x00000110L,0x00080010L,0x00080110L,
-	0x01000010L,0x01000110L,0x01080010L,0x01080110L,
-	0x00200000L,0x00200100L,0x00280000L,0x00280100L,
-	0x01200000L,0x01200100L,0x01280000L,0x01280100L,
-	0x00200010L,0x00200110L,0x00280010L,0x00280110L,
-	0x01200010L,0x01200110L,0x01280010L,0x01280110L,
-	0x00000200L,0x00000300L,0x00080200L,0x00080300L,
-	0x01000200L,0x01000300L,0x01080200L,0x01080300L,
-	0x00000210L,0x00000310L,0x00080210L,0x00080310L,
-	0x01000210L,0x01000310L,0x01080210L,0x01080310L,
-	0x00200200L,0x00200300L,0x00280200L,0x00280300L,
-	0x01200200L,0x01200300L,0x01280200L,0x01280300L,
-	0x00200210L,0x00200310L,0x00280210L,0x00280310L,
-	0x01200210L,0x01200310L,0x01280210L,0x01280310L,
-	},{
-	/* for D bits (numbered as per FIPS 46) 22 23 24 25 27 28 */
-	0x00000000L,0x04000000L,0x00040000L,0x04040000L,
-	0x00000002L,0x04000002L,0x00040002L,0x04040002L,
-	0x00002000L,0x04002000L,0x00042000L,0x04042000L,
-	0x00002002L,0x04002002L,0x00042002L,0x04042002L,
-	0x00000020L,0x04000020L,0x00040020L,0x04040020L,
-	0x00000022L,0x04000022L,0x00040022L,0x04040022L,
-	0x00002020L,0x04002020L,0x00042020L,0x04042020L,
-	0x00002022L,0x04002022L,0x00042022L,0x04042022L,
-	0x00000800L,0x04000800L,0x00040800L,0x04040800L,
-	0x00000802L,0x04000802L,0x00040802L,0x04040802L,
-	0x00002800L,0x04002800L,0x00042800L,0x04042800L,
-	0x00002802L,0x04002802L,0x00042802L,0x04042802L,
-	0x00000820L,0x04000820L,0x00040820L,0x04040820L,
-	0x00000822L,0x04000822L,0x00040822L,0x04040822L,
-	0x00002820L,0x04002820L,0x00042820L,0x04042820L,
-	0x00002822L,0x04002822L,0x00042822L,0x04042822L,
-	}};
-
-int DES_set_key(const_DES_cblock *key, DES_key_schedule *schedule)
-	{
-	if (DES_check_key)
-		{
-		return DES_set_key_checked(key, schedule);
-		}
-	else
-		{
-		DES_set_key_unchecked(key, schedule);
-		return 0;
-		}
-	}
-
-/* return 0 if key parity is odd (correct),
- * return -1 if key parity error,
- * return -2 if illegal weak key.
- */
-int DES_set_key_checked(const_DES_cblock *key, DES_key_schedule *schedule)
-	{
-	if (!DES_check_key_parity(key))
-		return(-1);
-	if (DES_is_weak_key(key))
-		return(-2);
-	DES_set_key_unchecked(key, schedule);
-	return 0;
-	}
-
-void DES_set_key_unchecked(const_DES_cblock *key, DES_key_schedule *schedule)
-	{
-	static int shifts2[16]={0,0,1,1,1,1,1,1,0,1,1,1,1,1,1,0};
-	register DES_LONG c,d,t,s,t2;
-	register const unsigned char *in;
-	register DES_LONG *k;
-	register int i;
-
-#ifdef OPENBSD_DEV_CRYPTO
-	memcpy(schedule->key,key,sizeof schedule->key);
-	schedule->session=NULL;
-#endif
-	k = &schedule->ks->deslong[0];
-	in = &(*key)[0];
-
-	c2l(in,c);
-	c2l(in,d);
-
-	/* do PC1 in 47 simple operations :-)
-	 * Thanks to John Fletcher (john_fletcher@lccmail.ocf.llnl.gov)
-	 * for the inspiration. :-) */
-	PERM_OP (d,c,t,4,0x0f0f0f0fL);
-	HPERM_OP(c,t,-2,0xcccc0000L);
-	HPERM_OP(d,t,-2,0xcccc0000L);
-	PERM_OP (d,c,t,1,0x55555555L);
-	PERM_OP (c,d,t,8,0x00ff00ffL);
-	PERM_OP (d,c,t,1,0x55555555L);
-	d=	(((d&0x000000ffL)<<16L)| (d&0x0000ff00L)     |
-		 ((d&0x00ff0000L)>>16L)|((c&0xf0000000L)>>4L));
-	c&=0x0fffffffL;
-
-	for (i=0; i<ITERATIONS; i++)
-		{
-		if (shifts2[i])
-			{ c=((c>>2L)|(c<<26L)); d=((d>>2L)|(d<<26L)); }
-		else
-			{ c=((c>>1L)|(c<<27L)); d=((d>>1L)|(d<<27L)); }
-		c&=0x0fffffffL;
-		d&=0x0fffffffL;
-		/* could be a few less shifts but I am to lazy at this
-		 * point in time to investigate */
-		s=	des_skb[0][ (c    )&0x3f                ]|
-			des_skb[1][((c>> 6L)&0x03)|((c>> 7L)&0x3c)]|
-			des_skb[2][((c>>13L)&0x0f)|((c>>14L)&0x30)]|
-			des_skb[3][((c>>20L)&0x01)|((c>>21L)&0x06) |
-						  ((c>>22L)&0x38)];
-		t=	des_skb[4][ (d    )&0x3f                ]|
-			des_skb[5][((d>> 7L)&0x03)|((d>> 8L)&0x3c)]|
-			des_skb[6][ (d>>15L)&0x3f                ]|
-			des_skb[7][((d>>21L)&0x0f)|((d>>22L)&0x30)];
-
-		/* table contained 0213 4657 */
-		t2=((t<<16L)|(s&0x0000ffffL))&0xffffffffL;
-		*(k++)=ROTATE(t2,30)&0xffffffffL;
-
-		t2=((s>>16L)|(t&0xffff0000L));
-		*(k++)=ROTATE(t2,26)&0xffffffffL;
-		}
-	}
-
-int DES_key_sched(const_DES_cblock *key, DES_key_schedule *schedule)
-	{
-	return(DES_set_key(key,schedule));
-	}
-/*
-#undef des_fixup_key_parity
-void des_fixup_key_parity(des_cblock *key)
-	{
-	des_set_odd_parity(key);
-	}
-*/
diff --git a/crypto/openssl/crypto/des/speed.c b/crypto/openssl/crypto/des/speed.c
deleted file mode 100644
index 1616f4b7c959..000000000000
--- a/crypto/openssl/crypto/des/speed.c
+++ /dev/null
@@ -1,314 +0,0 @@
-/* crypto/des/speed.c */
-/* Copyright (C) 1995-1998 Eric Young (eay@cryptsoft.com)
- * All rights reserved.
- *
- * This package is an SSL implementation written
- * by Eric Young (eay@cryptsoft.com).
- * The implementation was written so as to conform with Netscapes SSL.
- * 
- * This library is free for commercial and non-commercial use as long as
- * the following conditions are aheared to.  The following conditions
- * apply to all code found in this distribution, be it the RC4, RSA,
- * lhash, DES, etc., code; not just the SSL code.  The SSL documentation
- * included with this distribution is covered by the same copyright terms
- * except that the holder is Tim Hudson (tjh@cryptsoft.com).
- * 
- * Copyright remains Eric Young's, and as such any Copyright notices in
- * the code are not to be removed.
- * If this package is used in a product, Eric Young should be given attribution
- * as the author of the parts of the library used.
- * This can be in the form of a textual message at program startup or
- * in documentation (online or textual) provided with the package.
- * 
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions
- * are met:
- * 1. Redistributions of source code must retain the copyright
- *    notice, this list of conditions and the following disclaimer.
- * 2. Redistributions in binary form must reproduce the above copyright
- *    notice, this list of conditions and the following disclaimer in the
- *    documentation and/or other materials provided with the distribution.
- * 3. All advertising materials mentioning features or use of this software
- *    must display the following acknowledgement:
- *    "This product includes cryptographic software written by
- *     Eric Young (eay@cryptsoft.com)"
- *    The word 'cryptographic' can be left out if the rouines from the library
- *    being used are not cryptographic related :-).
- * 4. If you include any Windows specific code (or a derivative thereof) from 
- *    the apps directory (application code) you must include an acknowledgement:
- *    "This product includes software written by Tim Hudson (tjh@cryptsoft.com)"
- * 
- * THIS SOFTWARE IS PROVIDED BY ERIC YOUNG ``AS IS'' AND
- * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
- * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
- * ARE DISCLAIMED.  IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE
- * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
- * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
- * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
- * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
- * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
- * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
- * SUCH DAMAGE.
- * 
- * The licence and distribution terms for any publically available version or
- * derivative of this code cannot be changed.  i.e. this code cannot simply be
- * copied and put under another distribution licence
- * [including the GNU Public Licence.]
- */
-
-/* 11-Sep-92 Andrew Daviel   Support for Silicon Graphics IRIX added */
-/* 06-Apr-92 Luke Brennan    Support for VMS and add extra signal calls */
-
-#if !defined(OPENSSL_SYS_MSDOS) && (!defined(OPENSSL_SYS_VMS) || defined(__DECC)) && !defined(OPENSSL_SYS_MACOSX)
-#define TIMES
-#endif
-
-#include <stdio.h>
-
-#include <openssl/e_os2.h>
-#include OPENSSL_UNISTD_IO
-OPENSSL_DECLARE_EXIT
-
-#ifndef OPENSSL_SYS_NETWARE
-#include <signal.h>
-#define crypt(c,s) (des_crypt((c),(s)))
-#endif
-
-#ifndef _IRIX
-#include <time.h>
-#endif
-#ifdef TIMES
-#include <sys/types.h>
-#include <sys/times.h>
-#endif
-
-/* Depending on the VMS version, the tms structure is perhaps defined.
-   The __TMS macro will show if it was.  If it wasn't defined, we should
-   undefine TIMES, since that tells the rest of the program how things
-   should be handled.				-- Richard Levitte */
-#if defined(OPENSSL_SYS_VMS_DECC) && !defined(__TMS)
-#undef TIMES
-#endif
-
-#ifndef TIMES
-#include <sys/timeb.h>
-#endif
-
-#if defined(sun) || defined(__ultrix)
-#define _POSIX_SOURCE
-#include <limits.h>
-#include <sys/param.h>
-#endif
-
-#include <openssl/des.h>
-
-/* The following if from times(3) man page.  It may need to be changed */
-#ifndef HZ
-# ifndef CLK_TCK
-#  ifndef _BSD_CLK_TCK_ /* FreeBSD fix */
-#   define HZ	100.0
-#  else /* _BSD_CLK_TCK_ */
-#   define HZ ((double)_BSD_CLK_TCK_)
-#  endif
-# else /* CLK_TCK */
-#  define HZ ((double)CLK_TCK)
-# endif
-#endif
-
-#define BUFSIZE	((long)1024)
-long run=0;
-
-double Time_F(int s);
-#ifdef SIGALRM
-#if defined(__STDC__) || defined(sgi) || defined(_AIX)
-#define SIGRETTYPE void
-#else
-#define SIGRETTYPE int
-#endif
-
-SIGRETTYPE sig_done(int sig);
-SIGRETTYPE sig_done(int sig)
-	{
-	signal(SIGALRM,sig_done);
-	run=0;
-#ifdef LINT
-	sig=sig;
-#endif
-	}
-#endif
-
-#define START	0
-#define STOP	1
-
-double Time_F(int s)
-	{
-	double ret;
-#ifdef TIMES
-	static struct tms tstart,tend;
-
-	if (s == START)
-		{
-		times(&tstart);
-		return(0);
-		}
-	else
-		{
-		times(&tend);
-		ret=((double)(tend.tms_utime-tstart.tms_utime))/HZ;
-		return((ret == 0.0)?1e-6:ret);
-		}
-#else /* !times() */
-	static struct timeb tstart,tend;
-	long i;
-
-	if (s == START)
-		{
-		ftime(&tstart);
-		return(0);
-		}
-	else
-		{
-		ftime(&tend);
-		i=(long)tend.millitm-(long)tstart.millitm;
-		ret=((double)(tend.time-tstart.time))+((double)i)/1e3;
-		return((ret == 0.0)?1e-6:ret);
-		}
-#endif
-	}
-
-int main(int argc, char **argv)
-	{
-	long count;
-	static unsigned char buf[BUFSIZE];
-	static DES_cblock key ={0x12,0x34,0x56,0x78,0x9a,0xbc,0xde,0xf0};
-	static DES_cblock key2={0x34,0x56,0x78,0x9a,0xbc,0xde,0xf0,0x12};
-	static DES_cblock key3={0x56,0x78,0x9a,0xbc,0xde,0xf0,0x12,0x34};
-	DES_key_schedule sch,sch2,sch3;
-	double a,b,c,d,e;
-#ifndef SIGALRM
-	long ca,cb,cc,cd,ce;
-#endif
-
-#ifndef TIMES
-	printf("To get the most accurate results, try to run this\n");
-	printf("program when this computer is idle.\n");
-#endif
-
-	DES_set_key_unchecked(&key2,&sch2);
-	DES_set_key_unchecked(&key3,&sch3);
-
-#ifndef SIGALRM
-	printf("First we calculate the approximate speed ...\n");
-	DES_set_key_unchecked(&key,&sch);
-	count=10;
-	do	{
-		long i;
-		DES_LONG data[2];
-
-		count*=2;
-		Time_F(START);
-		for (i=count; i; i--)
-			DES_encrypt1(data,&sch,DES_ENCRYPT);
-		d=Time_F(STOP);
-		} while (d < 3.0);
-	ca=count;
-	cb=count*3;
-	cc=count*3*8/BUFSIZE+1;
-	cd=count*8/BUFSIZE+1;
-	ce=count/20+1;
-	printf("Doing set_key %ld times\n",ca);
-#define COND(d)	(count != (d))
-#define COUNT(d) (d)
-#else
-#define COND(c)	(run)
-#define COUNT(d) (count)
-	signal(SIGALRM,sig_done);
-	printf("Doing set_key for 10 seconds\n");
-	alarm(10);
-#endif
-
-	Time_F(START);
-	for (count=0,run=1; COND(ca); count++)
-		DES_set_key_unchecked(&key,&sch);
-	d=Time_F(STOP);
-	printf("%ld set_key's in %.2f seconds\n",count,d);
-	a=((double)COUNT(ca))/d;
-
-#ifdef SIGALRM
-	printf("Doing DES_encrypt's for 10 seconds\n");
-	alarm(10);
-#else
-	printf("Doing DES_encrypt %ld times\n",cb);
-#endif
-	Time_F(START);
-	for (count=0,run=1; COND(cb); count++)
-		{
-		DES_LONG data[2];
-
-		DES_encrypt1(data,&sch,DES_ENCRYPT);
-		}
-	d=Time_F(STOP);
-	printf("%ld DES_encrypt's in %.2f second\n",count,d);
-	b=((double)COUNT(cb)*8)/d;
-
-#ifdef SIGALRM
-	printf("Doing DES_cbc_encrypt on %ld byte blocks for 10 seconds\n",
-		BUFSIZE);
-	alarm(10);
-#else
-	printf("Doing DES_cbc_encrypt %ld times on %ld byte blocks\n",cc,
-		BUFSIZE);
-#endif
-	Time_F(START);
-	for (count=0,run=1; COND(cc); count++)
-		DES_ncbc_encrypt(buf,buf,BUFSIZE,&sch,
-			&key,DES_ENCRYPT);
-	d=Time_F(STOP);
-	printf("%ld DES_cbc_encrypt's of %ld byte blocks in %.2f second\n",
-		count,BUFSIZE,d);
-	c=((double)COUNT(cc)*BUFSIZE)/d;
-
-#ifdef SIGALRM
-	printf("Doing DES_ede_cbc_encrypt on %ld byte blocks for 10 seconds\n",
-		BUFSIZE);
-	alarm(10);
-#else
-	printf("Doing DES_ede_cbc_encrypt %ld times on %ld byte blocks\n",cd,
-		BUFSIZE);
-#endif
-	Time_F(START);
-	for (count=0,run=1; COND(cd); count++)
-		DES_ede3_cbc_encrypt(buf,buf,BUFSIZE,
-			&sch,
-			&sch2,
-			&sch3,
-			&key,
-			DES_ENCRYPT);
-	d=Time_F(STOP);
-	printf("%ld DES_ede_cbc_encrypt's of %ld byte blocks in %.2f second\n",
-		count,BUFSIZE,d);
-	d=((double)COUNT(cd)*BUFSIZE)/d;
-
-#ifdef SIGALRM
-	printf("Doing crypt for 10 seconds\n");
-	alarm(10);
-#else
-	printf("Doing crypt %ld times\n",ce);
-#endif
-	Time_F(START);
-	for (count=0,run=1; COND(ce); count++)
-		crypt("testing1","ef");
-	e=Time_F(STOP);
-	printf("%ld crypts in %.2f second\n",count,e);
-	e=((double)COUNT(ce))/e;
-
-	printf("set_key            per sec = %12.2f (%9.3fuS)\n",a,1.0e6/a);
-	printf("DES raw ecb bytes  per sec = %12.2f (%9.3fuS)\n",b,8.0e6/b);
-	printf("DES cbc bytes      per sec = %12.2f (%9.3fuS)\n",c,8.0e6/c);
-	printf("DES ede cbc bytes  per sec = %12.2f (%9.3fuS)\n",d,8.0e6/d);
-	printf("crypt              per sec = %12.2f (%9.3fuS)\n",e,1.0e6/e);
-	exit(0);
-#if defined(LINT) || defined(OPENSSL_SYS_MSDOS)
-	return(0);
-#endif
-	}
diff --git a/crypto/openssl/crypto/des/spr.h b/crypto/openssl/crypto/des/spr.h
deleted file mode 100644
index b91936a5a536..000000000000
--- a/crypto/openssl/crypto/des/spr.h
+++ /dev/null
@@ -1,204 +0,0 @@
-/* crypto/des/spr.h */
-/* Copyright (C) 1995-1998 Eric Young (eay@cryptsoft.com)
- * All rights reserved.
- *
- * This package is an SSL implementation written
- * by Eric Young (eay@cryptsoft.com).
- * The implementation was written so as to conform with Netscapes SSL.
- * 
- * This library is free for commercial and non-commercial use as long as
- * the following conditions are aheared to.  The following conditions
- * apply to all code found in this distribution, be it the RC4, RSA,
- * lhash, DES, etc., code; not just the SSL code.  The SSL documentation
- * included with this distribution is covered by the same copyright terms
- * except that the holder is Tim Hudson (tjh@cryptsoft.com).
- * 
- * Copyright remains Eric Young's, and as such any Copyright notices in
- * the code are not to be removed.
- * If this package is used in a product, Eric Young should be given attribution
- * as the author of the parts of the library used.
- * This can be in the form of a textual message at program startup or
- * in documentation (online or textual) provided with the package.
- * 
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions
- * are met:
- * 1. Redistributions of source code must retain the copyright
- *    notice, this list of conditions and the following disclaimer.
- * 2. Redistributions in binary form must reproduce the above copyright
- *    notice, this list of conditions and the following disclaimer in the
- *    documentation and/or other materials provided with the distribution.
- * 3. All advertising materials mentioning features or use of this software
- *    must display the following acknowledgement:
- *    "This product includes cryptographic software written by
- *     Eric Young (eay@cryptsoft.com)"
- *    The word 'cryptographic' can be left out if the rouines from the library
- *    being used are not cryptographic related :-).
- * 4. If you include any Windows specific code (or a derivative thereof) from 
- *    the apps directory (application code) you must include an acknowledgement:
- *    "This product includes software written by Tim Hudson (tjh@cryptsoft.com)"
- * 
- * THIS SOFTWARE IS PROVIDED BY ERIC YOUNG ``AS IS'' AND
- * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
- * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
- * ARE DISCLAIMED.  IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE
- * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
- * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
- * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
- * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
- * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
- * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
- * SUCH DAMAGE.
- * 
- * The licence and distribution terms for any publically available version or
- * derivative of this code cannot be changed.  i.e. this code cannot simply be
- * copied and put under another distribution licence
- * [including the GNU Public Licence.]
- */
-
-OPENSSL_GLOBAL const DES_LONG DES_SPtrans[8][64]={
-{
-/* nibble 0 */
-0x02080800L, 0x00080000L, 0x02000002L, 0x02080802L,
-0x02000000L, 0x00080802L, 0x00080002L, 0x02000002L,
-0x00080802L, 0x02080800L, 0x02080000L, 0x00000802L,
-0x02000802L, 0x02000000L, 0x00000000L, 0x00080002L,
-0x00080000L, 0x00000002L, 0x02000800L, 0x00080800L,
-0x02080802L, 0x02080000L, 0x00000802L, 0x02000800L,
-0x00000002L, 0x00000800L, 0x00080800L, 0x02080002L,
-0x00000800L, 0x02000802L, 0x02080002L, 0x00000000L,
-0x00000000L, 0x02080802L, 0x02000800L, 0x00080002L,
-0x02080800L, 0x00080000L, 0x00000802L, 0x02000800L,
-0x02080002L, 0x00000800L, 0x00080800L, 0x02000002L,
-0x00080802L, 0x00000002L, 0x02000002L, 0x02080000L,
-0x02080802L, 0x00080800L, 0x02080000L, 0x02000802L,
-0x02000000L, 0x00000802L, 0x00080002L, 0x00000000L,
-0x00080000L, 0x02000000L, 0x02000802L, 0x02080800L,
-0x00000002L, 0x02080002L, 0x00000800L, 0x00080802L,
-},{
-/* nibble 1 */
-0x40108010L, 0x00000000L, 0x00108000L, 0x40100000L,
-0x40000010L, 0x00008010L, 0x40008000L, 0x00108000L,
-0x00008000L, 0x40100010L, 0x00000010L, 0x40008000L,
-0x00100010L, 0x40108000L, 0x40100000L, 0x00000010L,
-0x00100000L, 0x40008010L, 0x40100010L, 0x00008000L,
-0x00108010L, 0x40000000L, 0x00000000L, 0x00100010L,
-0x40008010L, 0x00108010L, 0x40108000L, 0x40000010L,
-0x40000000L, 0x00100000L, 0x00008010L, 0x40108010L,
-0x00100010L, 0x40108000L, 0x40008000L, 0x00108010L,
-0x40108010L, 0x00100010L, 0x40000010L, 0x00000000L,
-0x40000000L, 0x00008010L, 0x00100000L, 0x40100010L,
-0x00008000L, 0x40000000L, 0x00108010L, 0x40008010L,
-0x40108000L, 0x00008000L, 0x00000000L, 0x40000010L,
-0x00000010L, 0x40108010L, 0x00108000L, 0x40100000L,
-0x40100010L, 0x00100000L, 0x00008010L, 0x40008000L,
-0x40008010L, 0x00000010L, 0x40100000L, 0x00108000L,
-},{
-/* nibble 2 */
-0x04000001L, 0x04040100L, 0x00000100L, 0x04000101L,
-0x00040001L, 0x04000000L, 0x04000101L, 0x00040100L,
-0x04000100L, 0x00040000L, 0x04040000L, 0x00000001L,
-0x04040101L, 0x00000101L, 0x00000001L, 0x04040001L,
-0x00000000L, 0x00040001L, 0x04040100L, 0x00000100L,
-0x00000101L, 0x04040101L, 0x00040000L, 0x04000001L,
-0x04040001L, 0x04000100L, 0x00040101L, 0x04040000L,
-0x00040100L, 0x00000000L, 0x04000000L, 0x00040101L,
-0x04040100L, 0x00000100L, 0x00000001L, 0x00040000L,
-0x00000101L, 0x00040001L, 0x04040000L, 0x04000101L,
-0x00000000L, 0x04040100L, 0x00040100L, 0x04040001L,
-0x00040001L, 0x04000000L, 0x04040101L, 0x00000001L,
-0x00040101L, 0x04000001L, 0x04000000L, 0x04040101L,
-0x00040000L, 0x04000100L, 0x04000101L, 0x00040100L,
-0x04000100L, 0x00000000L, 0x04040001L, 0x00000101L,
-0x04000001L, 0x00040101L, 0x00000100L, 0x04040000L,
-},{
-/* nibble 3 */
-0x00401008L, 0x10001000L, 0x00000008L, 0x10401008L,
-0x00000000L, 0x10400000L, 0x10001008L, 0x00400008L,
-0x10401000L, 0x10000008L, 0x10000000L, 0x00001008L,
-0x10000008L, 0x00401008L, 0x00400000L, 0x10000000L,
-0x10400008L, 0x00401000L, 0x00001000L, 0x00000008L,
-0x00401000L, 0x10001008L, 0x10400000L, 0x00001000L,
-0x00001008L, 0x00000000L, 0x00400008L, 0x10401000L,
-0x10001000L, 0x10400008L, 0x10401008L, 0x00400000L,
-0x10400008L, 0x00001008L, 0x00400000L, 0x10000008L,
-0x00401000L, 0x10001000L, 0x00000008L, 0x10400000L,
-0x10001008L, 0x00000000L, 0x00001000L, 0x00400008L,
-0x00000000L, 0x10400008L, 0x10401000L, 0x00001000L,
-0x10000000L, 0x10401008L, 0x00401008L, 0x00400000L,
-0x10401008L, 0x00000008L, 0x10001000L, 0x00401008L,
-0x00400008L, 0x00401000L, 0x10400000L, 0x10001008L,
-0x00001008L, 0x10000000L, 0x10000008L, 0x10401000L,
-},{
-/* nibble 4 */
-0x08000000L, 0x00010000L, 0x00000400L, 0x08010420L,
-0x08010020L, 0x08000400L, 0x00010420L, 0x08010000L,
-0x00010000L, 0x00000020L, 0x08000020L, 0x00010400L,
-0x08000420L, 0x08010020L, 0x08010400L, 0x00000000L,
-0x00010400L, 0x08000000L, 0x00010020L, 0x00000420L,
-0x08000400L, 0x00010420L, 0x00000000L, 0x08000020L,
-0x00000020L, 0x08000420L, 0x08010420L, 0x00010020L,
-0x08010000L, 0x00000400L, 0x00000420L, 0x08010400L,
-0x08010400L, 0x08000420L, 0x00010020L, 0x08010000L,
-0x00010000L, 0x00000020L, 0x08000020L, 0x08000400L,
-0x08000000L, 0x00010400L, 0x08010420L, 0x00000000L,
-0x00010420L, 0x08000000L, 0x00000400L, 0x00010020L,
-0x08000420L, 0x00000400L, 0x00000000L, 0x08010420L,
-0x08010020L, 0x08010400L, 0x00000420L, 0x00010000L,
-0x00010400L, 0x08010020L, 0x08000400L, 0x00000420L,
-0x00000020L, 0x00010420L, 0x08010000L, 0x08000020L,
-},{
-/* nibble 5 */
-0x80000040L, 0x00200040L, 0x00000000L, 0x80202000L,
-0x00200040L, 0x00002000L, 0x80002040L, 0x00200000L,
-0x00002040L, 0x80202040L, 0x00202000L, 0x80000000L,
-0x80002000L, 0x80000040L, 0x80200000L, 0x00202040L,
-0x00200000L, 0x80002040L, 0x80200040L, 0x00000000L,
-0x00002000L, 0x00000040L, 0x80202000L, 0x80200040L,
-0x80202040L, 0x80200000L, 0x80000000L, 0x00002040L,
-0x00000040L, 0x00202000L, 0x00202040L, 0x80002000L,
-0x00002040L, 0x80000000L, 0x80002000L, 0x00202040L,
-0x80202000L, 0x00200040L, 0x00000000L, 0x80002000L,
-0x80000000L, 0x00002000L, 0x80200040L, 0x00200000L,
-0x00200040L, 0x80202040L, 0x00202000L, 0x00000040L,
-0x80202040L, 0x00202000L, 0x00200000L, 0x80002040L,
-0x80000040L, 0x80200000L, 0x00202040L, 0x00000000L,
-0x00002000L, 0x80000040L, 0x80002040L, 0x80202000L,
-0x80200000L, 0x00002040L, 0x00000040L, 0x80200040L,
-},{
-/* nibble 6 */
-0x00004000L, 0x00000200L, 0x01000200L, 0x01000004L,
-0x01004204L, 0x00004004L, 0x00004200L, 0x00000000L,
-0x01000000L, 0x01000204L, 0x00000204L, 0x01004000L,
-0x00000004L, 0x01004200L, 0x01004000L, 0x00000204L,
-0x01000204L, 0x00004000L, 0x00004004L, 0x01004204L,
-0x00000000L, 0x01000200L, 0x01000004L, 0x00004200L,
-0x01004004L, 0x00004204L, 0x01004200L, 0x00000004L,
-0x00004204L, 0x01004004L, 0x00000200L, 0x01000000L,
-0x00004204L, 0x01004000L, 0x01004004L, 0x00000204L,
-0x00004000L, 0x00000200L, 0x01000000L, 0x01004004L,
-0x01000204L, 0x00004204L, 0x00004200L, 0x00000000L,
-0x00000200L, 0x01000004L, 0x00000004L, 0x01000200L,
-0x00000000L, 0x01000204L, 0x01000200L, 0x00004200L,
-0x00000204L, 0x00004000L, 0x01004204L, 0x01000000L,
-0x01004200L, 0x00000004L, 0x00004004L, 0x01004204L,
-0x01000004L, 0x01004200L, 0x01004000L, 0x00004004L,
-},{
-/* nibble 7 */
-0x20800080L, 0x20820000L, 0x00020080L, 0x00000000L,
-0x20020000L, 0x00800080L, 0x20800000L, 0x20820080L,
-0x00000080L, 0x20000000L, 0x00820000L, 0x00020080L,
-0x00820080L, 0x20020080L, 0x20000080L, 0x20800000L,
-0x00020000L, 0x00820080L, 0x00800080L, 0x20020000L,
-0x20820080L, 0x20000080L, 0x00000000L, 0x00820000L,
-0x20000000L, 0x00800000L, 0x20020080L, 0x20800080L,
-0x00800000L, 0x00020000L, 0x20820000L, 0x00000080L,
-0x00800000L, 0x00020000L, 0x20000080L, 0x20820080L,
-0x00020080L, 0x20000000L, 0x00000000L, 0x00820000L,
-0x20800080L, 0x20020080L, 0x20020000L, 0x00800080L,
-0x20820000L, 0x00000080L, 0x00800080L, 0x20020000L,
-0x20820080L, 0x00800000L, 0x20800000L, 0x20000080L,
-0x00820000L, 0x00020080L, 0x20020080L, 0x20800000L,
-0x00000080L, 0x20820000L, 0x00820080L, 0x00000000L,
-0x20000000L, 0x20800080L, 0x00020000L, 0x00820080L,
-}};
diff --git a/crypto/openssl/crypto/des/str2key.c b/crypto/openssl/crypto/des/str2key.c
deleted file mode 100644
index 9c2054bda6b9..000000000000
--- a/crypto/openssl/crypto/des/str2key.c
+++ /dev/null
@@ -1,174 +0,0 @@
-/* crypto/des/str2key.c */
-/* Copyright (C) 1995-1998 Eric Young (eay@cryptsoft.com)
- * All rights reserved.
- *
- * This package is an SSL implementation written
- * by Eric Young (eay@cryptsoft.com).
- * The implementation was written so as to conform with Netscapes SSL.
- * 
- * This library is free for commercial and non-commercial use as long as
- * the following conditions are aheared to.  The following conditions
- * apply to all code found in this distribution, be it the RC4, RSA,
- * lhash, DES, etc., code; not just the SSL code.  The SSL documentation
- * included with this distribution is covered by the same copyright terms
- * except that the holder is Tim Hudson (tjh@cryptsoft.com).
- * 
- * Copyright remains Eric Young's, and as such any Copyright notices in
- * the code are not to be removed.
- * If this package is used in a product, Eric Young should be given attribution
- * as the author of the parts of the library used.
- * This can be in the form of a textual message at program startup or
- * in documentation (online or textual) provided with the package.
- * 
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions
- * are met:
- * 1. Redistributions of source code must retain the copyright
- *    notice, this list of conditions and the following disclaimer.
- * 2. Redistributions in binary form must reproduce the above copyright
- *    notice, this list of conditions and the following disclaimer in the
- *    documentation and/or other materials provided with the distribution.
- * 3. All advertising materials mentioning features or use of this software
- *    must display the following acknowledgement:
- *    "This product includes cryptographic software written by
- *     Eric Young (eay@cryptsoft.com)"
- *    The word 'cryptographic' can be left out if the rouines from the library
- *    being used are not cryptographic related :-).
- * 4. If you include any Windows specific code (or a derivative thereof) from 
- *    the apps directory (application code) you must include an acknowledgement:
- *    "This product includes software written by Tim Hudson (tjh@cryptsoft.com)"
- * 
- * THIS SOFTWARE IS PROVIDED BY ERIC YOUNG ``AS IS'' AND
- * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
- * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
- * ARE DISCLAIMED.  IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE
- * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
- * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
- * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
- * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
- * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
- * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
- * SUCH DAMAGE.
- * 
- * The licence and distribution terms for any publically available version or
- * derivative of this code cannot be changed.  i.e. this code cannot simply be
- * copied and put under another distribution licence
- * [including the GNU Public Licence.]
- */
-
-#include "des_locl.h"
-#include <openssl/crypto.h>
-
-void DES_string_to_key(const char *str, DES_cblock *key)
-	{
-	DES_key_schedule ks;
-	int i,length;
-	register unsigned char j;
-
-	memset(key,0,8);
-	length=strlen(str);
-#ifdef OLD_STR_TO_KEY
-	for (i=0; i<length; i++)
-		(*key)[i%8]^=(str[i]<<1);
-#else /* MIT COMPATIBLE */
-	for (i=0; i<length; i++)
-		{
-		j=str[i];
-		if ((i%16) < 8)
-			(*key)[i%8]^=(j<<1);
-		else
-			{
-			/* Reverse the bit order 05/05/92 eay */
-			j=((j<<4)&0xf0)|((j>>4)&0x0f);
-			j=((j<<2)&0xcc)|((j>>2)&0x33);
-			j=((j<<1)&0xaa)|((j>>1)&0x55);
-			(*key)[7-(i%8)]^=j;
-			}
-		}
-#endif
-	DES_set_odd_parity(key);
-#ifdef EXPERIMENTAL_STR_TO_STRONG_KEY
-	if(DES_is_weak_key(key))
-	    (*key)[7] ^= 0xF0;
-	DES_set_key(key,&ks);
-#else
-	DES_set_key_unchecked(key,&ks);
-#endif
-	DES_cbc_cksum((const unsigned char*)str,key,length,&ks,key);
-	OPENSSL_cleanse(&ks,sizeof(ks));
-	DES_set_odd_parity(key);
-	}
-
-void DES_string_to_2keys(const char *str, DES_cblock *key1, DES_cblock *key2)
-	{
-	DES_key_schedule ks;
-	int i,length;
-	register unsigned char j;
-
-	memset(key1,0,8);
-	memset(key2,0,8);
-	length=strlen(str);
-#ifdef OLD_STR_TO_KEY
-	if (length <= 8)
-		{
-		for (i=0; i<length; i++)
-			{
-			(*key2)[i]=(*key1)[i]=(str[i]<<1);
-			}
-		}
-	else
-		{
-		for (i=0; i<length; i++)
-			{
-			if ((i/8)&1)
-				(*key2)[i%8]^=(str[i]<<1);
-			else
-				(*key1)[i%8]^=(str[i]<<1);
-			}
-		}
-#else /* MIT COMPATIBLE */
-	for (i=0; i<length; i++)
-		{
-		j=str[i];
-		if ((i%32) < 16)
-			{
-			if ((i%16) < 8)
-				(*key1)[i%8]^=(j<<1);
-			else
-				(*key2)[i%8]^=(j<<1);
-			}
-		else
-			{
-			j=((j<<4)&0xf0)|((j>>4)&0x0f);
-			j=((j<<2)&0xcc)|((j>>2)&0x33);
-			j=((j<<1)&0xaa)|((j>>1)&0x55);
-			if ((i%16) < 8)
-				(*key1)[7-(i%8)]^=j;
-			else
-				(*key2)[7-(i%8)]^=j;
-			}
-		}
-	if (length <= 8) memcpy(key2,key1,8);
-#endif
-	DES_set_odd_parity(key1);
-	DES_set_odd_parity(key2);
-#ifdef EXPERIMENTAL_STR_TO_STRONG_KEY
-	if(DES_is_weak_key(key1))
-	    (*key1)[7] ^= 0xF0;
-	DES_set_key(key1,&ks);
-#else
-	DES_set_key_unchecked(key1,&ks);
-#endif
-	DES_cbc_cksum((const unsigned char*)str,key1,length,&ks,key1);
-#ifdef EXPERIMENTAL_STR_TO_STRONG_KEY
-	if(DES_is_weak_key(key2))
-	    (*key2)[7] ^= 0xF0;
-	DES_set_key(key2,&ks);
-#else
-	DES_set_key_unchecked(key2,&ks);
-#endif
-	DES_cbc_cksum((const unsigned char*)str,key2,length,&ks,key2);
-	OPENSSL_cleanse(&ks,sizeof(ks));
-	DES_set_odd_parity(key1);
-	DES_set_odd_parity(key2);
-	}
diff --git a/crypto/openssl/crypto/des/t/test b/crypto/openssl/crypto/des/t/test
deleted file mode 100644
index 97acd0552e43..000000000000
--- a/crypto/openssl/crypto/des/t/test
+++ /dev/null
@@ -1,27 +0,0 @@
-#!./perl
-
-BEGIN { push(@INC, qw(../../../lib ../../lib ../lib lib)); }
-
-use DES;
-
-$key='00000000';
-$ks=DES::set_key($key);
-@a=split(//,$ks);
-foreach (@a) { printf "%02x-",ord($_); }
-print "\n";
-
-
-$key=DES::random_key();
-print "($_)\n";
-@a=split(//,$key);
-foreach (@a) { printf "%02x-",ord($_); }
-print "\n";
-$str="this is and again into the breach";
-($k1,$k2)=DES::string_to_2keys($str);
-@a=split(//,$k1);
-foreach (@a) { printf "%02x-",ord($_); }
-print "\n";
-@a=split(//,$k2);
-foreach (@a) { printf "%02x-",ord($_); }
-print "\n";
-
diff --git a/crypto/openssl/crypto/des/times/486-50.sol b/crypto/openssl/crypto/des/times/486-50.sol
deleted file mode 100644
index 0de62d6db31e..000000000000
--- a/crypto/openssl/crypto/des/times/486-50.sol
+++ /dev/null
@@ -1,16 +0,0 @@
-Solaris 2.4, 486 50mhz, gcc 2.6.3
-options    des ecb/s
-16 r2 i     43552.51 100.0%
-16 r1 i     43487.45  99.9%
-16  c p     43003.23  98.7%
-16 r2 p     42339.00  97.2%
-16  c i     41900.91  96.2%
-16 r1 p     41360.64  95.0%
- 4  c i     38728.48  88.9%
- 4  c p     38225.63  87.8%
- 4 r1 i     38085.79  87.4%
- 4 r2 i     37825.64  86.9%
- 4 r2 p     34611.00  79.5%
- 4 r1 p     31802.00  73.0%
--DDES_UNROLL -DDES_RISC2
-
diff --git a/crypto/openssl/crypto/des/times/586-100.lnx b/crypto/openssl/crypto/des/times/586-100.lnx
deleted file mode 100644
index 4323914a11bb..000000000000
--- a/crypto/openssl/crypto/des/times/586-100.lnx
+++ /dev/null
@@ -1,20 +0,0 @@
-Pentium 100
-Linux 2 kernel
-gcc 2.7.0 -O3 -fomit-frame-pointer
-No X server running, just a console, it makes the top speed jump from 151,000
-to 158,000 :-).
-options    des ecb/s
-assember   281000.00 177.1%
-16 r1 p    158667.40 100.0%
-16 r1 i    148471.70  93.6%
-16 r2 p    143961.80  90.7%
-16 r2 i    141689.20  89.3%
- 4 r1 i    140100.00  88.3%
- 4 r2 i    134049.40  84.5%
-16  c i    124145.20  78.2%
-16  c p    121584.20  76.6%
- 4  c i    118116.00  74.4%
- 4 r2 p    117977.90  74.4%
- 4  c p    114971.40  72.5%
- 4 r1 p    114578.40  72.2%
--DDES_UNROLL -DDES_RISC1 -DDES_PTR
diff --git a/crypto/openssl/crypto/des/times/686-200.fre b/crypto/openssl/crypto/des/times/686-200.fre
deleted file mode 100644
index 7d83f6adee15..000000000000
--- a/crypto/openssl/crypto/des/times/686-200.fre
+++ /dev/null
@@ -1,18 +0,0 @@
-Pentium 100
-Free BSD 2.1.5 kernel
-gcc 2.7.2.2 -O3 -fomit-frame-pointer
-options    des ecb/s
-assember   578000.00 133.1%
-16 r2 i    434454.80 100.0%
-16 r1 i    433621.43  99.8%
-16 r2 p    431375.69  99.3%
- 4 r1 i    423722.30  97.5%
- 4 r2 i    422399.40  97.2%
-16 r1 p    421739.40  97.1%
-16  c i    399027.94  91.8%
-16  c p    372251.70  85.7%
- 4  c i    365118.35  84.0%
- 4  c p    352880.51  81.2%
- 4 r2 p    255104.90  58.7%
- 4 r1 p    251289.18  57.8%
--DDES_UNROLL -DDES_RISC2
diff --git a/crypto/openssl/crypto/des/times/aix.cc b/crypto/openssl/crypto/des/times/aix.cc
deleted file mode 100644
index d96b74e2cedd..000000000000
--- a/crypto/openssl/crypto/des/times/aix.cc
+++ /dev/null
@@ -1,26 +0,0 @@
-From: Paco Garcia <pgarcia@cam.es>
-
-This machine is a Bull Estrella  Minitower Model MT604-100
-Processor        : PPC604 
-P.Speed          : 100Mhz 
-Data/Instr Cache :    16 K
-L2 Cache         :   256 K
-PCI BUS Speed    :    33 Mhz
-TransfRate PCI   :   132 MB/s
-Memory           :    96 MB
-
-options    des ecb/s       
- 4  c p    275118.61 100.0%
- 4  c i    273545.07  99.4%
- 4 r2 p    270441.02  98.3%
- 4 r1 p    253052.15  92.0%
- 4 r2 i    240842.97  87.5%
- 4 r1 i    240556.66  87.4%
-16  c i    224603.99  81.6%
-16  c p    224483.98  81.6%
-16 r2 p    215691.19  78.4%
-16 r1 p    208332.83  75.7%
-16 r1 i    199206.50  72.4%
-16 r2 i    198963.70  72.3%
--DDES_PTR
-
diff --git a/crypto/openssl/crypto/des/times/alpha.cc b/crypto/openssl/crypto/des/times/alpha.cc
deleted file mode 100644
index 95c17efae7e5..000000000000
--- a/crypto/openssl/crypto/des/times/alpha.cc
+++ /dev/null
@@ -1,18 +0,0 @@
-cc -O2
-DES_LONG is 'unsigned int'
-
-options    des ecb/s
- 4 r2 p    181146.14 100.0%
-16 r2 p    172102.94  95.0%
- 4 r2 i    165424.11  91.3%
-16  c p    160468.64  88.6%
- 4  c p    156653.59  86.5%
- 4  c i    155245.18  85.7%
- 4 r1 p    154729.68  85.4%
-16 r2 i    154137.69  85.1%
-16 r1 p    152357.96  84.1%
-16  c i    148743.91  82.1%
- 4 r1 i    146695.59  81.0%
-16 r1 i    144961.00  80.0%
--DDES_RISC2 -DDES_PTR
-
diff --git a/crypto/openssl/crypto/des/times/hpux.cc b/crypto/openssl/crypto/des/times/hpux.cc
deleted file mode 100644
index 3de856ddac5a..000000000000
--- a/crypto/openssl/crypto/des/times/hpux.cc
+++ /dev/null
@@ -1,17 +0,0 @@
-HPUX 10 - 9000/887 - cc -D_HPUX_SOURCE -Aa +ESlit +O2 -Wl,-a,archive
-
-options    des ecb/s
-16  c i    149448.90 100.0%
- 4  c i    145861.79  97.6%
-16 r2 i    141710.96  94.8%
-16 r1 i    139455.33  93.3%
- 4 r2 i    138800.00  92.9%
- 4 r1 i    136692.65  91.5%
-16 r2 p    110228.17  73.8%
-16 r1 p    109397.07  73.2%
-16  c p    109209.89  73.1%
- 4  c p    108014.71  72.3%
- 4 r2 p    107873.88  72.2%
- 4 r1 p    107685.83  72.1%
--DDES_UNROLL
-
diff --git a/crypto/openssl/crypto/des/times/sparc.gcc b/crypto/openssl/crypto/des/times/sparc.gcc
deleted file mode 100644
index 8eaa04210406..000000000000
--- a/crypto/openssl/crypto/des/times/sparc.gcc
+++ /dev/null
@@ -1,17 +0,0 @@
-solaris 2.5.1 - sparc 10 50mhz - gcc 2.7.2
-
-options    des ecb/s
-16  c i    124382.70 100.0%
- 4  c i    118884.68  95.6%
-16  c p    112261.20  90.3%
-16 r2 i    111777.10  89.9%
-16 r2 p    108896.30  87.5%
-16 r1 p    108791.59  87.5%
- 4  c p    107290.10  86.3%
- 4 r1 p    104583.80  84.1%
-16 r1 i    104206.20  83.8%
- 4 r2 p    103709.80  83.4%
- 4 r2 i     98306.43  79.0%
- 4 r1 i     91525.80  73.6%
--DDES_UNROLL
-      
diff --git a/crypto/openssl/crypto/des/times/usparc.cc b/crypto/openssl/crypto/des/times/usparc.cc
deleted file mode 100644
index f6ec8e8831d8..000000000000
--- a/crypto/openssl/crypto/des/times/usparc.cc
+++ /dev/null
@@ -1,31 +0,0 @@
-solaris 2.5.1 usparc 167mhz?? - SC4.0 cc -fast -Xa -xO5
-
-For the ultra sparc, SunC 4.0 cc -fast -Xa -xO5, running 'des_opts'
-gives a speed of 475,000 des/s while 'speed' gives 417,000 des/s.
-I belive the difference is tied up in optimisation that the compiler
-is able to perform when the code is 'inlined'.  For 'speed', the DES
-routines are being linked from a library.  I'll record the higher
-speed since if performance is everything, you can always inline
-'des_enc.c'.
-
-[ 16-Jan-06 - I've been playing with the
-  '-xtarget=ultra -xarch=v8plus -Xa -xO5 -Xa'
-  and while it makes the des_opts numbers much slower, it makes the
-  actual 'speed' numbers look better which is a realistic version of
-  using the libraries. ]
-
-options    des ecb/s
-16 r1 p    475516.90 100.0%
-16 r2 p    439388.10  92.4%
-16  c i    427001.40  89.8%
-16  c p    419516.50  88.2%
- 4 r2 p    409491.70  86.1%
- 4 r1 p    404266.90  85.0%
- 4  c p    398121.00  83.7%
- 4  c i    370588.40  77.9%
- 4 r1 i    362742.20  76.3%
-16 r2 i    331275.50  69.7%
-16 r1 i    324730.60  68.3%
- 4 r2 i     63535.10  13.4%	<-- very very weird, must be cache problems.
--DDES_UNROLL -DDES_RISC1 -DDES_PTR
-
diff --git a/crypto/openssl/crypto/des/typemap b/crypto/openssl/crypto/des/typemap
deleted file mode 100644
index a524f53634e7..000000000000
--- a/crypto/openssl/crypto/des/typemap
+++ /dev/null
@@ -1,34 +0,0 @@
-#
-# DES SECTION
-#
-deschar *	T_DESCHARP
-des_cblock *	T_CBLOCK
-des_cblock	T_CBLOCK
-des_key_schedule	T_SCHEDULE
-des_key_schedule *	T_SCHEDULE
-
-INPUT
-T_CBLOCK
-	$var=(des_cblock *)SvPV($arg,len);
-	if (len < DES_KEY_SZ)
-		{
-		croak(\"$var needs to be at least %u bytes long\",DES_KEY_SZ);
-		}
-
-T_SCHEDULE
-	$var=(des_key_schedule *)SvPV($arg,len);
-	if (len < DES_SCHEDULE_SZ)
-		{
-		croak(\"$var needs to be at least %u bytes long\",
-			DES_SCHEDULE_SZ);
-		}
-
-OUTPUT
-T_CBLOCK
-	sv_setpvn($arg,(char *)$var,DES_KEY_SZ);
-
-T_SCHEDULE
-	sv_setpvn($arg,(char *)$var,DES_SCHEDULE_SZ);
-
-T_DESCHARP
-	sv_setpvn($arg,(char *)$var,len);
diff --git a/crypto/openssl/crypto/des/xcbc_enc.c b/crypto/openssl/crypto/des/xcbc_enc.c
deleted file mode 100644
index 47246eb46649..000000000000
--- a/crypto/openssl/crypto/des/xcbc_enc.c
+++ /dev/null
@@ -1,195 +0,0 @@
-/* crypto/des/xcbc_enc.c */
-/* Copyright (C) 1995-1998 Eric Young (eay@cryptsoft.com)
- * All rights reserved.
- *
- * This package is an SSL implementation written
- * by Eric Young (eay@cryptsoft.com).
- * The implementation was written so as to conform with Netscapes SSL.
- * 
- * This library is free for commercial and non-commercial use as long as
- * the following conditions are aheared to.  The following conditions
- * apply to all code found in this distribution, be it the RC4, RSA,
- * lhash, DES, etc., code; not just the SSL code.  The SSL documentation
- * included with this distribution is covered by the same copyright terms
- * except that the holder is Tim Hudson (tjh@cryptsoft.com).
- * 
- * Copyright remains Eric Young's, and as such any Copyright notices in
- * the code are not to be removed.
- * If this package is used in a product, Eric Young should be given attribution
- * as the author of the parts of the library used.
- * This can be in the form of a textual message at program startup or
- * in documentation (online or textual) provided with the package.
- * 
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions
- * are met:
- * 1. Redistributions of source code must retain the copyright
- *    notice, this list of conditions and the following disclaimer.
- * 2. Redistributions in binary form must reproduce the above copyright
- *    notice, this list of conditions and the following disclaimer in the
- *    documentation and/or other materials provided with the distribution.
- * 3. All advertising materials mentioning features or use of this software
- *    must display the following acknowledgement:
- *    "This product includes cryptographic software written by
- *     Eric Young (eay@cryptsoft.com)"
- *    The word 'cryptographic' can be left out if the rouines from the library
- *    being used are not cryptographic related :-).
- * 4. If you include any Windows specific code (or a derivative thereof) from 
- *    the apps directory (application code) you must include an acknowledgement:
- *    "This product includes software written by Tim Hudson (tjh@cryptsoft.com)"
- * 
- * THIS SOFTWARE IS PROVIDED BY ERIC YOUNG ``AS IS'' AND
- * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
- * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
- * ARE DISCLAIMED.  IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE
- * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
- * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
- * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
- * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
- * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
- * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
- * SUCH DAMAGE.
- * 
- * The licence and distribution terms for any publically available version or
- * derivative of this code cannot be changed.  i.e. this code cannot simply be
- * copied and put under another distribution licence
- * [including the GNU Public Licence.]
- */
-
-#include "des_locl.h"
-
-/* RSA's DESX */
-
-static unsigned char desx_white_in2out[256]={
-0xBD,0x56,0xEA,0xF2,0xA2,0xF1,0xAC,0x2A,0xB0,0x93,0xD1,0x9C,0x1B,0x33,0xFD,0xD0,
-0x30,0x04,0xB6,0xDC,0x7D,0xDF,0x32,0x4B,0xF7,0xCB,0x45,0x9B,0x31,0xBB,0x21,0x5A,
-0x41,0x9F,0xE1,0xD9,0x4A,0x4D,0x9E,0xDA,0xA0,0x68,0x2C,0xC3,0x27,0x5F,0x80,0x36,
-0x3E,0xEE,0xFB,0x95,0x1A,0xFE,0xCE,0xA8,0x34,0xA9,0x13,0xF0,0xA6,0x3F,0xD8,0x0C,
-0x78,0x24,0xAF,0x23,0x52,0xC1,0x67,0x17,0xF5,0x66,0x90,0xE7,0xE8,0x07,0xB8,0x60,
-0x48,0xE6,0x1E,0x53,0xF3,0x92,0xA4,0x72,0x8C,0x08,0x15,0x6E,0x86,0x00,0x84,0xFA,
-0xF4,0x7F,0x8A,0x42,0x19,0xF6,0xDB,0xCD,0x14,0x8D,0x50,0x12,0xBA,0x3C,0x06,0x4E,
-0xEC,0xB3,0x35,0x11,0xA1,0x88,0x8E,0x2B,0x94,0x99,0xB7,0x71,0x74,0xD3,0xE4,0xBF,
-0x3A,0xDE,0x96,0x0E,0xBC,0x0A,0xED,0x77,0xFC,0x37,0x6B,0x03,0x79,0x89,0x62,0xC6,
-0xD7,0xC0,0xD2,0x7C,0x6A,0x8B,0x22,0xA3,0x5B,0x05,0x5D,0x02,0x75,0xD5,0x61,0xE3,
-0x18,0x8F,0x55,0x51,0xAD,0x1F,0x0B,0x5E,0x85,0xE5,0xC2,0x57,0x63,0xCA,0x3D,0x6C,
-0xB4,0xC5,0xCC,0x70,0xB2,0x91,0x59,0x0D,0x47,0x20,0xC8,0x4F,0x58,0xE0,0x01,0xE2,
-0x16,0x38,0xC4,0x6F,0x3B,0x0F,0x65,0x46,0xBE,0x7E,0x2D,0x7B,0x82,0xF9,0x40,0xB5,
-0x1D,0x73,0xF8,0xEB,0x26,0xC7,0x87,0x97,0x25,0x54,0xB1,0x28,0xAA,0x98,0x9D,0xA5,
-0x64,0x6D,0x7A,0xD4,0x10,0x81,0x44,0xEF,0x49,0xD6,0xAE,0x2E,0xDD,0x76,0x5C,0x2F,
-0xA7,0x1C,0xC9,0x09,0x69,0x9A,0x83,0xCF,0x29,0x39,0xB9,0xE9,0x4C,0xFF,0x43,0xAB,
-	};
-
-void DES_xwhite_in2out(const_DES_cblock *des_key, const_DES_cblock *in_white,
-	     DES_cblock *out_white)
-	{
-	int out0,out1;
-	int i;
-	const unsigned char *key = &(*des_key)[0];
-	const unsigned char *in = &(*in_white)[0];
-	unsigned char *out = &(*out_white)[0];
-
-	out[0]=out[1]=out[2]=out[3]=out[4]=out[5]=out[6]=out[7]=0;
-	out0=out1=0;
-	for (i=0; i<8; i++)
-		{
-		out[i]=key[i]^desx_white_in2out[out0^out1];
-		out0=out1;
-		out1=(int)out[i&0x07];
-		}
-
-	out0=out[0];
-	out1=out[i];
-	for (i=0; i<8; i++)
-		{
-		out[i]=in[i]^desx_white_in2out[out0^out1];
-		out0=out1;
-		out1=(int)out[i&0x07];
-		}
-	}
-
-void DES_xcbc_encrypt(const unsigned char *in, unsigned char *out,
-		      long length, DES_key_schedule *schedule,
-		      DES_cblock *ivec, const_DES_cblock *inw,
-		      const_DES_cblock *outw, int enc)
-	{
-	register DES_LONG tin0,tin1;
-	register DES_LONG tout0,tout1,xor0,xor1;
-	register DES_LONG inW0,inW1,outW0,outW1;
-	register const unsigned char *in2;
-	register long l=length;
-	DES_LONG tin[2];
-	unsigned char *iv;
-
-	in2 = &(*inw)[0];
-	c2l(in2,inW0);
-	c2l(in2,inW1);
-	in2 = &(*outw)[0];
-	c2l(in2,outW0);
-	c2l(in2,outW1);
-
-	iv = &(*ivec)[0];
-
-	if (enc)
-		{
-		c2l(iv,tout0);
-		c2l(iv,tout1);
-		for (l-=8; l>=0; l-=8)
-			{
-			c2l(in,tin0);
-			c2l(in,tin1);
-			tin0^=tout0^inW0; tin[0]=tin0;
-			tin1^=tout1^inW1; tin[1]=tin1;
-			DES_encrypt1(tin,schedule,DES_ENCRYPT);
-			tout0=tin[0]^outW0; l2c(tout0,out);
-			tout1=tin[1]^outW1; l2c(tout1,out);
-			}
-		if (l != -8)
-			{
-			c2ln(in,tin0,tin1,l+8);
-			tin0^=tout0^inW0; tin[0]=tin0;
-			tin1^=tout1^inW1; tin[1]=tin1;
-			DES_encrypt1(tin,schedule,DES_ENCRYPT);
-			tout0=tin[0]^outW0; l2c(tout0,out);
-			tout1=tin[1]^outW1; l2c(tout1,out);
-			}
-		iv = &(*ivec)[0];
-		l2c(tout0,iv);
-		l2c(tout1,iv);
-		}
-	else
-		{
-		c2l(iv,xor0);
-		c2l(iv,xor1);
-		for (l-=8; l>0; l-=8)
-			{
-			c2l(in,tin0); tin[0]=tin0^outW0;
-			c2l(in,tin1); tin[1]=tin1^outW1;
-			DES_encrypt1(tin,schedule,DES_DECRYPT);
-			tout0=tin[0]^xor0^inW0;
-			tout1=tin[1]^xor1^inW1;
-			l2c(tout0,out);
-			l2c(tout1,out);
-			xor0=tin0;
-			xor1=tin1;
-			}
-		if (l != -8)
-			{
-			c2l(in,tin0); tin[0]=tin0^outW0;
-			c2l(in,tin1); tin[1]=tin1^outW1;
-			DES_encrypt1(tin,schedule,DES_DECRYPT);
-			tout0=tin[0]^xor0^inW0;
-			tout1=tin[1]^xor1^inW1;
-			l2cn(tout0,tout1,out,l+8);
-			xor0=tin0;
-			xor1=tin1;
-			}
-
-		iv = &(*ivec)[0];
-		l2c(xor0,iv);
-		l2c(xor1,iv);
-		}
-	tin0=tin1=tout0=tout1=xor0=xor1=0;
-	inW0=inW1=outW0=outW1=0;
-	tin[0]=tin[1]=0;
-	}
-
diff --git a/crypto/openssl/crypto/dh/Makefile b/crypto/openssl/crypto/dh/Makefile
deleted file mode 100644
index d368e33b4ced..000000000000
--- a/crypto/openssl/crypto/dh/Makefile
+++ /dev/null
@@ -1,133 +0,0 @@
-#
-# OpenSSL/crypto/dh/Makefile
-#
-
-DIR=	dh
-TOP=	../..
-CC=	cc
-INCLUDES= -I.. -I$(TOP) -I../../include
-CFLAG=-g
-MAKEFILE=	Makefile
-AR=		ar r
-
-CFLAGS= $(INCLUDES) $(CFLAG)
-
-GENERAL=Makefile
-TEST= dhtest.c
-APPS=
-
-LIB=$(TOP)/libcrypto.a
-LIBSRC= dh_asn1.c dh_gen.c dh_key.c dh_lib.c dh_check.c dh_err.c dh_depr.c
-LIBOBJ= dh_asn1.o dh_gen.o dh_key.o dh_lib.o dh_check.o dh_err.o dh_depr.o
-
-SRC= $(LIBSRC)
-
-EXHEADER= dh.h
-HEADER=	$(EXHEADER)
-
-ALL=    $(GENERAL) $(SRC) $(HEADER)
-
-top:
-	(cd ../..; $(MAKE) DIRS=crypto SDIRS=$(DIR) sub_all)
-
-all:	lib
-
-lib:	$(LIBOBJ)
-	$(AR) $(LIB) $(LIBOBJ)
-	$(RANLIB) $(LIB) || echo Never mind.
-	@touch lib
-
-files:
-	$(PERL) $(TOP)/util/files.pl Makefile >> $(TOP)/MINFO
-
-links:
-	@$(PERL) $(TOP)/util/mklink.pl ../../include/openssl $(EXHEADER)
-	@$(PERL) $(TOP)/util/mklink.pl ../../test $(TEST)
-	@$(PERL) $(TOP)/util/mklink.pl ../../apps $(APPS)
-
-install:
-	@[ -n "$(INSTALLTOP)" ] # should be set by top Makefile...
-	@headerlist="$(EXHEADER)"; for i in $$headerlist ; \
-	do  \
-	(cp $$i $(INSTALL_PREFIX)$(INSTALLTOP)/include/openssl/$$i; \
-	chmod 644 $(INSTALL_PREFIX)$(INSTALLTOP)/include/openssl/$$i ); \
-	done;
-
-tags:
-	ctags $(SRC)
-
-tests:
-
-lint:
-	lint -DLINT $(INCLUDES) $(SRC)>fluff
-
-depend:
-	@[ -n "$(MAKEDEPEND)" ] # should be set by upper Makefile...
-	$(MAKEDEPEND) -- $(CFLAG) $(INCLUDES) $(DEPFLAG) -- $(PROGS) $(LIBSRC)
-
-dclean:
-	$(PERL) -pe 'if (/^# DO NOT DELETE THIS LINE/) {print; exit(0);}' $(MAKEFILE) >Makefile.new
-	mv -f Makefile.new $(MAKEFILE)
-
-clean:
-	rm -f *.o */*.o *.obj lib tags core .pure .nfs* *.old *.bak fluff
-
-# DO NOT DELETE THIS LINE -- make depend depends on it.
-
-dh_asn1.o: ../../e_os.h ../../include/openssl/asn1.h
-dh_asn1.o: ../../include/openssl/asn1t.h ../../include/openssl/bio.h
-dh_asn1.o: ../../include/openssl/bn.h ../../include/openssl/buffer.h
-dh_asn1.o: ../../include/openssl/crypto.h ../../include/openssl/dh.h
-dh_asn1.o: ../../include/openssl/e_os2.h ../../include/openssl/err.h
-dh_asn1.o: ../../include/openssl/lhash.h ../../include/openssl/obj_mac.h
-dh_asn1.o: ../../include/openssl/objects.h ../../include/openssl/opensslconf.h
-dh_asn1.o: ../../include/openssl/opensslv.h ../../include/openssl/ossl_typ.h
-dh_asn1.o: ../../include/openssl/safestack.h ../../include/openssl/stack.h
-dh_asn1.o: ../../include/openssl/symhacks.h ../cryptlib.h dh_asn1.c
-dh_check.o: ../../e_os.h ../../include/openssl/bio.h ../../include/openssl/bn.h
-dh_check.o: ../../include/openssl/buffer.h ../../include/openssl/crypto.h
-dh_check.o: ../../include/openssl/dh.h ../../include/openssl/e_os2.h
-dh_check.o: ../../include/openssl/err.h ../../include/openssl/lhash.h
-dh_check.o: ../../include/openssl/opensslconf.h
-dh_check.o: ../../include/openssl/opensslv.h ../../include/openssl/ossl_typ.h
-dh_check.o: ../../include/openssl/safestack.h ../../include/openssl/stack.h
-dh_check.o: ../../include/openssl/symhacks.h ../cryptlib.h dh_check.c
-dh_depr.o: ../../e_os.h ../../include/openssl/bio.h ../../include/openssl/bn.h
-dh_depr.o: ../../include/openssl/buffer.h ../../include/openssl/crypto.h
-dh_depr.o: ../../include/openssl/dh.h ../../include/openssl/e_os2.h
-dh_depr.o: ../../include/openssl/err.h ../../include/openssl/lhash.h
-dh_depr.o: ../../include/openssl/opensslconf.h ../../include/openssl/opensslv.h
-dh_depr.o: ../../include/openssl/ossl_typ.h ../../include/openssl/safestack.h
-dh_depr.o: ../../include/openssl/stack.h ../../include/openssl/symhacks.h
-dh_depr.o: ../cryptlib.h dh_depr.c
-dh_err.o: ../../include/openssl/bio.h ../../include/openssl/crypto.h
-dh_err.o: ../../include/openssl/dh.h ../../include/openssl/e_os2.h
-dh_err.o: ../../include/openssl/err.h ../../include/openssl/lhash.h
-dh_err.o: ../../include/openssl/opensslconf.h ../../include/openssl/opensslv.h
-dh_err.o: ../../include/openssl/ossl_typ.h ../../include/openssl/safestack.h
-dh_err.o: ../../include/openssl/stack.h ../../include/openssl/symhacks.h
-dh_err.o: dh_err.c
-dh_gen.o: ../../e_os.h ../../include/openssl/bio.h ../../include/openssl/bn.h
-dh_gen.o: ../../include/openssl/buffer.h ../../include/openssl/crypto.h
-dh_gen.o: ../../include/openssl/dh.h ../../include/openssl/e_os2.h
-dh_gen.o: ../../include/openssl/err.h ../../include/openssl/lhash.h
-dh_gen.o: ../../include/openssl/opensslconf.h ../../include/openssl/opensslv.h
-dh_gen.o: ../../include/openssl/ossl_typ.h ../../include/openssl/safestack.h
-dh_gen.o: ../../include/openssl/stack.h ../../include/openssl/symhacks.h
-dh_gen.o: ../cryptlib.h dh_gen.c
-dh_key.o: ../../e_os.h ../../include/openssl/bio.h ../../include/openssl/bn.h
-dh_key.o: ../../include/openssl/buffer.h ../../include/openssl/crypto.h
-dh_key.o: ../../include/openssl/dh.h ../../include/openssl/e_os2.h
-dh_key.o: ../../include/openssl/err.h ../../include/openssl/lhash.h
-dh_key.o: ../../include/openssl/opensslconf.h ../../include/openssl/opensslv.h
-dh_key.o: ../../include/openssl/ossl_typ.h ../../include/openssl/rand.h
-dh_key.o: ../../include/openssl/safestack.h ../../include/openssl/stack.h
-dh_key.o: ../../include/openssl/symhacks.h ../cryptlib.h dh_key.c
-dh_lib.o: ../../e_os.h ../../include/openssl/bio.h ../../include/openssl/bn.h
-dh_lib.o: ../../include/openssl/buffer.h ../../include/openssl/crypto.h
-dh_lib.o: ../../include/openssl/dh.h ../../include/openssl/e_os2.h
-dh_lib.o: ../../include/openssl/engine.h ../../include/openssl/err.h
-dh_lib.o: ../../include/openssl/lhash.h ../../include/openssl/opensslconf.h
-dh_lib.o: ../../include/openssl/opensslv.h ../../include/openssl/ossl_typ.h
-dh_lib.o: ../../include/openssl/safestack.h ../../include/openssl/stack.h
-dh_lib.o: ../../include/openssl/symhacks.h ../cryptlib.h dh_lib.c
diff --git a/crypto/openssl/crypto/dh/dh.h b/crypto/openssl/crypto/dh/dh.h
deleted file mode 100644
index ccdf35ae1c27..000000000000
--- a/crypto/openssl/crypto/dh/dh.h
+++ /dev/null
@@ -1,234 +0,0 @@
-/* crypto/dh/dh.h */
-/* Copyright (C) 1995-1998 Eric Young (eay@cryptsoft.com)
- * All rights reserved.
- *
- * This package is an SSL implementation written
- * by Eric Young (eay@cryptsoft.com).
- * The implementation was written so as to conform with Netscapes SSL.
- * 
- * This library is free for commercial and non-commercial use as long as
- * the following conditions are aheared to.  The following conditions
- * apply to all code found in this distribution, be it the RC4, RSA,
- * lhash, DES, etc., code; not just the SSL code.  The SSL documentation
- * included with this distribution is covered by the same copyright terms
- * except that the holder is Tim Hudson (tjh@cryptsoft.com).
- * 
- * Copyright remains Eric Young's, and as such any Copyright notices in
- * the code are not to be removed.
- * If this package is used in a product, Eric Young should be given attribution
- * as the author of the parts of the library used.
- * This can be in the form of a textual message at program startup or
- * in documentation (online or textual) provided with the package.
- * 
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions
- * are met:
- * 1. Redistributions of source code must retain the copyright
- *    notice, this list of conditions and the following disclaimer.
- * 2. Redistributions in binary form must reproduce the above copyright
- *    notice, this list of conditions and the following disclaimer in the
- *    documentation and/or other materials provided with the distribution.
- * 3. All advertising materials mentioning features or use of this software
- *    must display the following acknowledgement:
- *    "This product includes cryptographic software written by
- *     Eric Young (eay@cryptsoft.com)"
- *    The word 'cryptographic' can be left out if the rouines from the library
- *    being used are not cryptographic related :-).
- * 4. If you include any Windows specific code (or a derivative thereof) from 
- *    the apps directory (application code) you must include an acknowledgement:
- *    "This product includes software written by Tim Hudson (tjh@cryptsoft.com)"
- * 
- * THIS SOFTWARE IS PROVIDED BY ERIC YOUNG ``AS IS'' AND
- * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
- * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
- * ARE DISCLAIMED.  IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE
- * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
- * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
- * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
- * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
- * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
- * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
- * SUCH DAMAGE.
- * 
- * The licence and distribution terms for any publically available version or
- * derivative of this code cannot be changed.  i.e. this code cannot simply be
- * copied and put under another distribution licence
- * [including the GNU Public Licence.]
- */
-
-#ifndef HEADER_DH_H
-#define HEADER_DH_H
-
-#include <openssl/e_os2.h>
-
-#ifdef OPENSSL_NO_DH
-#error DH is disabled.
-#endif
-
-#ifndef OPENSSL_NO_BIO
-#include <openssl/bio.h>
-#endif
-#include <openssl/ossl_typ.h>
-#ifndef OPENSSL_NO_DEPRECATED
-#include <openssl/bn.h>
-#endif
-	
-#ifndef OPENSSL_DH_MAX_MODULUS_BITS
-# define OPENSSL_DH_MAX_MODULUS_BITS	10000
-#endif
-
-#define DH_FLAG_CACHE_MONT_P     0x01
-#define DH_FLAG_NO_EXP_CONSTTIME 0x02 /* new with 0.9.7h; the built-in DH
-                                       * implementation now uses constant time
-                                       * modular exponentiation for secret exponents
-                                       * by default. This flag causes the
-                                       * faster variable sliding window method to
-                                       * be used for all exponents.
-                                       */
-
-#ifdef  __cplusplus
-extern "C" {
-#endif
-
-/* Already defined in ossl_typ.h */
-/* typedef struct dh_st DH; */
-/* typedef struct dh_method DH_METHOD; */
-
-struct dh_method
-	{
-	const char *name;
-	/* Methods here */
-	int (*generate_key)(DH *dh);
-	int (*compute_key)(unsigned char *key,const BIGNUM *pub_key,DH *dh);
-	int (*bn_mod_exp)(const DH *dh, BIGNUM *r, const BIGNUM *a,
-				const BIGNUM *p, const BIGNUM *m, BN_CTX *ctx,
-				BN_MONT_CTX *m_ctx); /* Can be null */
-
-	int (*init)(DH *dh);
-	int (*finish)(DH *dh);
-	int flags;
-	char *app_data;
-	/* If this is non-NULL, it will be used to generate parameters */
-	int (*generate_params)(DH *dh, int prime_len, int generator, BN_GENCB *cb);
-	};
-
-struct dh_st
-	{
-	/* This first argument is used to pick up errors when
-	 * a DH is passed instead of a EVP_PKEY */
-	int pad;
-	int version;
-	BIGNUM *p;
-	BIGNUM *g;
-	long length; /* optional */
-	BIGNUM *pub_key;	/* g^x */
-	BIGNUM *priv_key;	/* x */
-
-	int flags;
-	BN_MONT_CTX *method_mont_p;
-	/* Place holders if we want to do X9.42 DH */
-	BIGNUM *q;
-	BIGNUM *j;
-	unsigned char *seed;
-	int seedlen;
-	BIGNUM *counter;
-
-	int references;
-	CRYPTO_EX_DATA ex_data;
-	const DH_METHOD *meth;
-	ENGINE *engine;
-	};
-
-#define DH_GENERATOR_2		2
-/* #define DH_GENERATOR_3	3 */
-#define DH_GENERATOR_5		5
-
-/* DH_check error codes */
-#define DH_CHECK_P_NOT_PRIME		0x01
-#define DH_CHECK_P_NOT_SAFE_PRIME	0x02
-#define DH_UNABLE_TO_CHECK_GENERATOR	0x04
-#define DH_NOT_SUITABLE_GENERATOR	0x08
-
-/* DH_check_pub_key error codes */
-#define DH_CHECK_PUBKEY_TOO_SMALL	0x01
-#define DH_CHECK_PUBKEY_TOO_LARGE	0x02
-
-/* primes p where (p-1)/2 is prime too are called "safe"; we define
-   this for backward compatibility: */
-#define DH_CHECK_P_NOT_STRONG_PRIME	DH_CHECK_P_NOT_SAFE_PRIME
-
-#define DHparams_dup(x) ASN1_dup_of_const(DH,i2d_DHparams,d2i_DHparams,x)
-#define d2i_DHparams_fp(fp,x) (DH *)ASN1_d2i_fp((char *(*)())DH_new, \
-		(char *(*)())d2i_DHparams,(fp),(unsigned char **)(x))
-#define i2d_DHparams_fp(fp,x) ASN1_i2d_fp(i2d_DHparams,(fp), \
-		(unsigned char *)(x))
-#define d2i_DHparams_bio(bp,x) ASN1_d2i_bio_of(DH,DH_new,d2i_DHparams,bp,x)
-#define i2d_DHparams_bio(bp,x) ASN1_i2d_bio_of_const(DH,i2d_DHparams,bp,x)
-
-const DH_METHOD *DH_OpenSSL(void);
-
-void DH_set_default_method(const DH_METHOD *meth);
-const DH_METHOD *DH_get_default_method(void);
-int DH_set_method(DH *dh, const DH_METHOD *meth);
-DH *DH_new_method(ENGINE *engine);
-
-DH *	DH_new(void);
-void	DH_free(DH *dh);
-int	DH_up_ref(DH *dh);
-int	DH_size(const DH *dh);
-int DH_get_ex_new_index(long argl, void *argp, CRYPTO_EX_new *new_func,
-	     CRYPTO_EX_dup *dup_func, CRYPTO_EX_free *free_func);
-int DH_set_ex_data(DH *d, int idx, void *arg);
-void *DH_get_ex_data(DH *d, int idx);
-
-/* Deprecated version */
-#ifndef OPENSSL_NO_DEPRECATED
-DH *	DH_generate_parameters(int prime_len,int generator,
-		void (*callback)(int,int,void *),void *cb_arg);
-#endif /* !defined(OPENSSL_NO_DEPRECATED) */
-
-/* New version */
-int	DH_generate_parameters_ex(DH *dh, int prime_len,int generator, BN_GENCB *cb);
-
-int	DH_check(const DH *dh,int *codes);
-int	DH_check_pub_key(const DH *dh,const BIGNUM *pub_key, int *codes);
-int	DH_generate_key(DH *dh);
-int	DH_compute_key(unsigned char *key,const BIGNUM *pub_key,DH *dh);
-DH *	d2i_DHparams(DH **a,const unsigned char **pp, long length);
-int	i2d_DHparams(const DH *a,unsigned char **pp);
-#ifndef OPENSSL_NO_FP_API
-int	DHparams_print_fp(FILE *fp, const DH *x);
-#endif
-#ifndef OPENSSL_NO_BIO
-int	DHparams_print(BIO *bp, const DH *x);
-#else
-int	DHparams_print(char *bp, const DH *x);
-#endif
-
-/* BEGIN ERROR CODES */
-/* The following lines are auto generated by the script mkerr.pl. Any changes
- * made after this point may be overwritten when the script is next run.
- */
-void ERR_load_DH_strings(void);
-
-/* Error codes for the DH functions. */
-
-/* Function codes. */
-#define DH_F_COMPUTE_KEY				 102
-#define DH_F_DHPARAMS_PRINT				 100
-#define DH_F_DHPARAMS_PRINT_FP				 101
-#define DH_F_DH_BUILTIN_GENPARAMS			 106
-#define DH_F_DH_NEW_METHOD				 105
-#define DH_F_GENERATE_KEY				 103
-#define DH_F_GENERATE_PARAMETERS			 104
-
-/* Reason codes. */
-#define DH_R_BAD_GENERATOR				 101
-#define DH_R_INVALID_PUBKEY				 102
-#define DH_R_MODULUS_TOO_LARGE				 103
-#define DH_R_NO_PRIVATE_VALUE				 100
-
-#ifdef  __cplusplus
-}
-#endif
-#endif
diff --git a/crypto/openssl/crypto/dh/dh1024.pem b/crypto/openssl/crypto/dh/dh1024.pem
deleted file mode 100644
index 81d43f6a3eae..000000000000
--- a/crypto/openssl/crypto/dh/dh1024.pem
+++ /dev/null
@@ -1,5 +0,0 @@
------BEGIN DH PARAMETERS-----
-MIGHAoGBAJf2QmHKtQXdKCjhPx1ottPb0PMTBH9A6FbaWMsTuKG/K3g6TG1Z1fkq
-/Gz/PWk/eLI9TzFgqVAuPvr3q14a1aZeVUMTgo2oO5/y2UHe6VaJ+trqCTat3xlx
-/mNbIK9HA2RgPC3gWfVLZQrY+gz3ASHHR5nXWHEyvpuZm7m3h+irAgEC
------END DH PARAMETERS-----
diff --git a/crypto/openssl/crypto/dh/dh192.pem b/crypto/openssl/crypto/dh/dh192.pem
deleted file mode 100644
index 521c07271d0d..000000000000
--- a/crypto/openssl/crypto/dh/dh192.pem
+++ /dev/null
@@ -1,3 +0,0 @@
------BEGIN DH PARAMETERS-----
-MB4CGQDUoLoCULb9LsYm5+/WN992xxbiLQlEuIsCAQM=
------END DH PARAMETERS-----
diff --git a/crypto/openssl/crypto/dh/dh2048.pem b/crypto/openssl/crypto/dh/dh2048.pem
deleted file mode 100644
index 295460f5081e..000000000000
--- a/crypto/openssl/crypto/dh/dh2048.pem
+++ /dev/null
@@ -1,16 +0,0 @@
------BEGIN DH PARAMETERS-----
-MIIBCAKCAQEA7ZKJNYJFVcs7+6J2WmkEYb8h86tT0s0h2v94GRFS8Q7B4lW9aG9o
-AFO5Imov5Jo0H2XMWTKKvbHbSe3fpxJmw/0hBHAY8H/W91hRGXKCeyKpNBgdL8sh
-z22SrkO2qCnHJ6PLAMXy5fsKpFmFor2tRfCzrfnggTXu2YOzzK7q62bmqVdmufEo
-pT8igNcLpvZxk5uBDvhakObMym9mX3rAEBoe8PwttggMYiiw7NuJKO4MqD1llGkW
-aVM8U2ATsCun1IKHrRxynkE1/MJ86VHeYYX8GZt2YA8z+GuzylIOKcMH6JAWzMwA
-Gbatw6QwizOhr9iMjZ0B26TE3X8LvW84wwIBAg==
------END DH PARAMETERS-----
------BEGIN DH PARAMETERS-----
-MIIBCAKCAQEArtA3w73zP6Lu3EOQtwogiXt3AXXpuS6yD4BhzNS1pZFyPHk0/an5
-8ydEkPhQZHKDW+BZJxxPLANaTudWo2YT8TgtvUdN6KSgMiEi6McwqDw+SADuvW+F
-SKUYFxG6VFIxyEP6xBdf+vhJxEDbRG2EYsHDRRtJ76gp9cSKTHusf2R+4AAVGqnt
-gRAbNqtcOar/7FSj+Pl8G3v0Bty0LcCSpbqgYlnv6z+rErQmmC6PPvSz97TDMCok
-yKpCE9hFA1zkqK3TH4FmFvGeIaXJUIBZf4mArWuBTjWFW3nmhESRUn1VK3K3x42N
-a5k6c2+EhrMFiLjxuH6JZoqL0/E93FF9SwIBAg==
------END DH PARAMETERS-----
diff --git a/crypto/openssl/crypto/dh/dh4096.pem b/crypto/openssl/crypto/dh/dh4096.pem
deleted file mode 100644
index 390943a21dc4..000000000000
--- a/crypto/openssl/crypto/dh/dh4096.pem
+++ /dev/null
@@ -1,14 +0,0 @@
------BEGIN DH PARAMETERS-----
-MIICCAKCAgEA/urRnb6vkPYc/KEGXWnbCIOaKitq7ySIq9dTH7s+Ri59zs77zty7
-vfVlSe6VFTBWgYjD2XKUFmtqq6CqXMhVX5ElUDoYDpAyTH85xqNFLzFC7nKrff/H
-TFKNttp22cZE9V0IPpzedPfnQkE7aUdmF9JnDyv21Z/818O93u1B4r0szdnmEvEF
-bKuIxEHX+bp0ZR7RqE1AeifXGJX3d6tsd2PMAObxwwsv55RGkn50vHO4QxtTARr1
-rRUV5j3B3oPMgC7Offxx+98Xn45B1/G0Prp11anDsR1PGwtaCYipqsvMwQUSJtyE
-EOQWk+yFkeMe4vWv367eEi0Sd/wnC+TSXBE3pYvpYerJ8n1MceI5GQTdarJ77OW9
-bGTHmxRsLSCM1jpLdPja5jjb4siAa6EHc4qN9c/iFKS3PQPJEnX7pXKBRs5f7AF3
-W3RIGt+G9IVNZfXaS7Z/iCpgzgvKCs0VeqN38QsJGtC1aIkwOeyjPNy2G6jJ4yqH
-ovXYt/0mc00vCWeSNS1wren0pR2EiLxX0ypjjgsU1mk/Z3b/+zVf7fZSIB+nDLjb
-NPtUlJCVGnAeBK1J1nG3TQicqowOXoM6ISkdaXj5GPJdXHab2+S7cqhKGv5qC7rR
-jT6sx7RUr0CNTxzLI7muV2/a4tGmj0PSdXQdsZ7tw7gbXlaWT1+MM2MCAQI=
------END DH PARAMETERS-----
-
diff --git a/crypto/openssl/crypto/dh/dh512.pem b/crypto/openssl/crypto/dh/dh512.pem
deleted file mode 100644
index 0a4d863ebe27..000000000000
--- a/crypto/openssl/crypto/dh/dh512.pem
+++ /dev/null
@@ -1,4 +0,0 @@
------BEGIN DH PARAMETERS-----
-MEYCQQDaWDwW2YUiidDkr3VvTMqS3UvlM7gE+w/tlO+cikQD7VdGUNNpmdsp13Yn
-a6LT1BLiGPTdHghM9tgAPnxHdOgzAgEC
------END DH PARAMETERS-----
diff --git a/crypto/openssl/crypto/dh/dh_asn1.c b/crypto/openssl/crypto/dh/dh_asn1.c
deleted file mode 100644
index 769b5b68c53f..000000000000
--- a/crypto/openssl/crypto/dh/dh_asn1.c
+++ /dev/null
@@ -1,87 +0,0 @@
-/* dh_asn1.c */
-/* Written by Dr Stephen N Henson (shenson@bigfoot.com) for the OpenSSL
- * project 2000.
- */
-/* ====================================================================
- * Copyright (c) 2000 The OpenSSL Project.  All rights reserved.
- *
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions
- * are met:
- *
- * 1. Redistributions of source code must retain the above copyright
- *    notice, this list of conditions and the following disclaimer. 
- *
- * 2. Redistributions in binary form must reproduce the above copyright
- *    notice, this list of conditions and the following disclaimer in
- *    the documentation and/or other materials provided with the
- *    distribution.
- *
- * 3. All advertising materials mentioning features or use of this
- *    software must display the following acknowledgment:
- *    "This product includes software developed by the OpenSSL Project
- *    for use in the OpenSSL Toolkit. (http://www.OpenSSL.org/)"
- *
- * 4. The names "OpenSSL Toolkit" and "OpenSSL Project" must not be used to
- *    endorse or promote products derived from this software without
- *    prior written permission. For written permission, please contact
- *    licensing@OpenSSL.org.
- *
- * 5. Products derived from this software may not be called "OpenSSL"
- *    nor may "OpenSSL" appear in their names without prior written
- *    permission of the OpenSSL Project.
- *
- * 6. Redistributions of any form whatsoever must retain the following
- *    acknowledgment:
- *    "This product includes software developed by the OpenSSL Project
- *    for use in the OpenSSL Toolkit (http://www.OpenSSL.org/)"
- *
- * THIS SOFTWARE IS PROVIDED BY THE OpenSSL PROJECT ``AS IS'' AND ANY
- * EXPRESSED OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
- * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR
- * PURPOSE ARE DISCLAIMED.  IN NO EVENT SHALL THE OpenSSL PROJECT OR
- * ITS CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
- * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
- * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
- * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
- * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
- * STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
- * ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED
- * OF THE POSSIBILITY OF SUCH DAMAGE.
- * ====================================================================
- *
- * This product includes cryptographic software written by Eric Young
- * (eay@cryptsoft.com).  This product includes software written by Tim
- * Hudson (tjh@cryptsoft.com).
- *
- */
-
-#include <stdio.h>
-#include "cryptlib.h"
-#include <openssl/bn.h>
-#include <openssl/dh.h>
-#include <openssl/objects.h>
-#include <openssl/asn1t.h>
-
-/* Override the default free and new methods */
-static int dh_cb(int operation, ASN1_VALUE **pval, const ASN1_ITEM *it)
-{
-	if(operation == ASN1_OP_NEW_PRE) {
-		*pval = (ASN1_VALUE *)DH_new();
-		if(*pval) return 2;
-		return 0;
-	} else if(operation == ASN1_OP_FREE_PRE) {
-		DH_free((DH *)*pval);
-		*pval = NULL;
-		return 2;
-	}
-	return 1;
-}
-
-ASN1_SEQUENCE_cb(DHparams, dh_cb) = {
-	ASN1_SIMPLE(DH, p, BIGNUM),
-	ASN1_SIMPLE(DH, g, BIGNUM),
-	ASN1_OPT(DH, length, ZLONG),
-} ASN1_SEQUENCE_END_cb(DH, DHparams)
-
-IMPLEMENT_ASN1_ENCODE_FUNCTIONS_const_fname(DH, DHparams, DHparams)
diff --git a/crypto/openssl/crypto/dh/dh_check.c b/crypto/openssl/crypto/dh/dh_check.c
deleted file mode 100644
index 058aec75bcd9..000000000000
--- a/crypto/openssl/crypto/dh/dh_check.c
+++ /dev/null
@@ -1,142 +0,0 @@
-/* crypto/dh/dh_check.c */
-/* Copyright (C) 1995-1998 Eric Young (eay@cryptsoft.com)
- * All rights reserved.
- *
- * This package is an SSL implementation written
- * by Eric Young (eay@cryptsoft.com).
- * The implementation was written so as to conform with Netscapes SSL.
- * 
- * This library is free for commercial and non-commercial use as long as
- * the following conditions are aheared to.  The following conditions
- * apply to all code found in this distribution, be it the RC4, RSA,
- * lhash, DES, etc., code; not just the SSL code.  The SSL documentation
- * included with this distribution is covered by the same copyright terms
- * except that the holder is Tim Hudson (tjh@cryptsoft.com).
- * 
- * Copyright remains Eric Young's, and as such any Copyright notices in
- * the code are not to be removed.
- * If this package is used in a product, Eric Young should be given attribution
- * as the author of the parts of the library used.
- * This can be in the form of a textual message at program startup or
- * in documentation (online or textual) provided with the package.
- * 
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions
- * are met:
- * 1. Redistributions of source code must retain the copyright
- *    notice, this list of conditions and the following disclaimer.
- * 2. Redistributions in binary form must reproduce the above copyright
- *    notice, this list of conditions and the following disclaimer in the
- *    documentation and/or other materials provided with the distribution.
- * 3. All advertising materials mentioning features or use of this software
- *    must display the following acknowledgement:
- *    "This product includes cryptographic software written by
- *     Eric Young (eay@cryptsoft.com)"
- *    The word 'cryptographic' can be left out if the rouines from the library
- *    being used are not cryptographic related :-).
- * 4. If you include any Windows specific code (or a derivative thereof) from 
- *    the apps directory (application code) you must include an acknowledgement:
- *    "This product includes software written by Tim Hudson (tjh@cryptsoft.com)"
- * 
- * THIS SOFTWARE IS PROVIDED BY ERIC YOUNG ``AS IS'' AND
- * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
- * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
- * ARE DISCLAIMED.  IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE
- * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
- * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
- * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
- * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
- * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
- * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
- * SUCH DAMAGE.
- * 
- * The licence and distribution terms for any publically available version or
- * derivative of this code cannot be changed.  i.e. this code cannot simply be
- * copied and put under another distribution licence
- * [including the GNU Public Licence.]
- */
-
-#include <stdio.h>
-#include "cryptlib.h"
-#include <openssl/bn.h>
-#include <openssl/dh.h>
-
-/* Check that p is a safe prime and
- * if g is 2, 3 or 5, check that is is a suitable generator
- * where
- * for 2, p mod 24 == 11
- * for 3, p mod 12 == 5
- * for 5, p mod 10 == 3 or 7
- * should hold.
- */
-
-int DH_check(const DH *dh, int *ret)
-	{
-	int ok=0;
-	BN_CTX *ctx=NULL;
-	BN_ULONG l;
-	BIGNUM *q=NULL;
-
-	*ret=0;
-	ctx=BN_CTX_new();
-	if (ctx == NULL) goto err;
-	q=BN_new();
-	if (q == NULL) goto err;
-
-	if (BN_is_word(dh->g,DH_GENERATOR_2))
-		{
-		l=BN_mod_word(dh->p,24);
-		if (l != 11) *ret|=DH_NOT_SUITABLE_GENERATOR;
-		}
-#if 0
-	else if (BN_is_word(dh->g,DH_GENERATOR_3))
-		{
-		l=BN_mod_word(dh->p,12);
-		if (l != 5) *ret|=DH_NOT_SUITABLE_GENERATOR;
-		}
-#endif
-	else if (BN_is_word(dh->g,DH_GENERATOR_5))
-		{
-		l=BN_mod_word(dh->p,10);
-		if ((l != 3) && (l != 7))
-			*ret|=DH_NOT_SUITABLE_GENERATOR;
-		}
-	else
-		*ret|=DH_UNABLE_TO_CHECK_GENERATOR;
-
-	if (!BN_is_prime_ex(dh->p,BN_prime_checks,ctx,NULL))
-		*ret|=DH_CHECK_P_NOT_PRIME;
-	else
-		{
-		if (!BN_rshift1(q,dh->p)) goto err;
-		if (!BN_is_prime_ex(q,BN_prime_checks,ctx,NULL))
-			*ret|=DH_CHECK_P_NOT_SAFE_PRIME;
-		}
-	ok=1;
-err:
-	if (ctx != NULL) BN_CTX_free(ctx);
-	if (q != NULL) BN_free(q);
-	return(ok);
-	}
-
-int DH_check_pub_key(const DH *dh, const BIGNUM *pub_key, int *ret)
-	{
-	int ok=0;
-	BIGNUM *q=NULL;
-
-	*ret=0;
-	q=BN_new();
-	if (q == NULL) goto err;
-	BN_set_word(q,1);
-	if (BN_cmp(pub_key,q) <= 0)
-		*ret|=DH_CHECK_PUBKEY_TOO_SMALL;
-	BN_copy(q,dh->p);
-	BN_sub_word(q,1);
-	if (BN_cmp(pub_key,q) >= 0)
-		*ret|=DH_CHECK_PUBKEY_TOO_LARGE;
-
-	ok = 1;
-err:
-	if (q != NULL) BN_free(q);
-	return(ok);
-	}
diff --git a/crypto/openssl/crypto/dh/dh_depr.c b/crypto/openssl/crypto/dh/dh_depr.c
deleted file mode 100644
index acc05f252c1e..000000000000
--- a/crypto/openssl/crypto/dh/dh_depr.c
+++ /dev/null
@@ -1,83 +0,0 @@
-/* crypto/dh/dh_depr.c */
-/* ====================================================================
- * Copyright (c) 1998-2002 The OpenSSL Project.  All rights reserved.
- *
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions
- * are met:
- *
- * 1. Redistributions of source code must retain the above copyright
- *    notice, this list of conditions and the following disclaimer. 
- *
- * 2. Redistributions in binary form must reproduce the above copyright
- *    notice, this list of conditions and the following disclaimer in
- *    the documentation and/or other materials provided with the
- *    distribution.
- *
- * 3. All advertising materials mentioning features or use of this
- *    software must display the following acknowledgment:
- *    "This product includes software developed by the OpenSSL Project
- *    for use in the OpenSSL Toolkit. (http://www.openssl.org/)"
- *
- * 4. The names "OpenSSL Toolkit" and "OpenSSL Project" must not be used to
- *    endorse or promote products derived from this software without
- *    prior written permission. For written permission, please contact
- *    openssl-core@openssl.org.
- *
- * 5. Products derived from this software may not be called "OpenSSL"
- *    nor may "OpenSSL" appear in their names without prior written
- *    permission of the OpenSSL Project.
- *
- * 6. Redistributions of any form whatsoever must retain the following
- *    acknowledgment:
- *    "This product includes software developed by the OpenSSL Project
- *    for use in the OpenSSL Toolkit (http://www.openssl.org/)"
- *
- * THIS SOFTWARE IS PROVIDED BY THE OpenSSL PROJECT ``AS IS'' AND ANY
- * EXPRESSED OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
- * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR
- * PURPOSE ARE DISCLAIMED.  IN NO EVENT SHALL THE OpenSSL PROJECT OR
- * ITS CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
- * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
- * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
- * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
- * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
- * STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
- * ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED
- * OF THE POSSIBILITY OF SUCH DAMAGE.
- * ====================================================================
- *
- * This product includes cryptographic software written by Eric Young
- * (eay@cryptsoft.com).  This product includes software written by Tim
- * Hudson (tjh@cryptsoft.com).
- *
- */
-
-
-/* This file contains deprecated functions as wrappers to the new ones */
-
-#include <stdio.h>
-#include "cryptlib.h"
-#include <openssl/bn.h>
-#include <openssl/dh.h>
-
-static void *dummy=&dummy;
-
-#ifndef OPENSSL_NO_DEPRECATED
-DH *DH_generate_parameters(int prime_len, int generator,
-	     void (*callback)(int,int,void *), void *cb_arg)
-	{
-	BN_GENCB cb;
-	DH *ret=NULL;
-
-	if((ret=DH_new()) == NULL)
-		return NULL;
-
-	BN_GENCB_set_old(&cb, callback, cb_arg);
-
-	if(DH_generate_parameters_ex(ret, prime_len, generator, &cb))
-		return ret;
-	DH_free(ret);
-	return NULL;
-	}
-#endif
diff --git a/crypto/openssl/crypto/dh/dh_err.c b/crypto/openssl/crypto/dh/dh_err.c
deleted file mode 100644
index a2d8196ecbd7..000000000000
--- a/crypto/openssl/crypto/dh/dh_err.c
+++ /dev/null
@@ -1,104 +0,0 @@
-/* crypto/dh/dh_err.c */
-/* ====================================================================
- * Copyright (c) 1999-2005 The OpenSSL Project.  All rights reserved.
- *
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions
- * are met:
- *
- * 1. Redistributions of source code must retain the above copyright
- *    notice, this list of conditions and the following disclaimer. 
- *
- * 2. Redistributions in binary form must reproduce the above copyright
- *    notice, this list of conditions and the following disclaimer in
- *    the documentation and/or other materials provided with the
- *    distribution.
- *
- * 3. All advertising materials mentioning features or use of this
- *    software must display the following acknowledgment:
- *    "This product includes software developed by the OpenSSL Project
- *    for use in the OpenSSL Toolkit. (http://www.OpenSSL.org/)"
- *
- * 4. The names "OpenSSL Toolkit" and "OpenSSL Project" must not be used to
- *    endorse or promote products derived from this software without
- *    prior written permission. For written permission, please contact
- *    openssl-core@OpenSSL.org.
- *
- * 5. Products derived from this software may not be called "OpenSSL"
- *    nor may "OpenSSL" appear in their names without prior written
- *    permission of the OpenSSL Project.
- *
- * 6. Redistributions of any form whatsoever must retain the following
- *    acknowledgment:
- *    "This product includes software developed by the OpenSSL Project
- *    for use in the OpenSSL Toolkit (http://www.OpenSSL.org/)"
- *
- * THIS SOFTWARE IS PROVIDED BY THE OpenSSL PROJECT ``AS IS'' AND ANY
- * EXPRESSED OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
- * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR
- * PURPOSE ARE DISCLAIMED.  IN NO EVENT SHALL THE OpenSSL PROJECT OR
- * ITS CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
- * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
- * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
- * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
- * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
- * STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
- * ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED
- * OF THE POSSIBILITY OF SUCH DAMAGE.
- * ====================================================================
- *
- * This product includes cryptographic software written by Eric Young
- * (eay@cryptsoft.com).  This product includes software written by Tim
- * Hudson (tjh@cryptsoft.com).
- *
- */
-
-/* NOTE: this file was auto generated by the mkerr.pl script: any changes
- * made to it will be overwritten when the script next updates this file,
- * only reason strings will be preserved.
- */
-
-#include <stdio.h>
-#include <openssl/err.h>
-#include <openssl/dh.h>
-
-/* BEGIN ERROR CODES */
-#ifndef OPENSSL_NO_ERR
-
-#define ERR_FUNC(func) ERR_PACK(ERR_LIB_DH,func,0)
-#define ERR_REASON(reason) ERR_PACK(ERR_LIB_DH,0,reason)
-
-static ERR_STRING_DATA DH_str_functs[]=
-	{
-{ERR_FUNC(DH_F_COMPUTE_KEY),	"COMPUTE_KEY"},
-{ERR_FUNC(DH_F_DHPARAMS_PRINT),	"DHparams_print"},
-{ERR_FUNC(DH_F_DHPARAMS_PRINT_FP),	"DHparams_print_fp"},
-{ERR_FUNC(DH_F_DH_BUILTIN_GENPARAMS),	"DH_BUILTIN_GENPARAMS"},
-{ERR_FUNC(DH_F_DH_NEW_METHOD),	"DH_new_method"},
-{ERR_FUNC(DH_F_GENERATE_KEY),	"GENERATE_KEY"},
-{ERR_FUNC(DH_F_GENERATE_PARAMETERS),	"GENERATE_PARAMETERS"},
-{0,NULL}
-	};
-
-static ERR_STRING_DATA DH_str_reasons[]=
-	{
-{ERR_REASON(DH_R_BAD_GENERATOR)          ,"bad generator"},
-{ERR_REASON(DH_R_INVALID_PUBKEY)         ,"invalid public key"},
-{ERR_REASON(DH_R_MODULUS_TOO_LARGE)      ,"modulus too large"},
-{ERR_REASON(DH_R_NO_PRIVATE_VALUE)       ,"no private value"},
-{0,NULL}
-	};
-
-#endif
-
-void ERR_load_DH_strings(void)
-	{
-#ifndef OPENSSL_NO_ERR
-
-	if (ERR_func_error_string(DH_str_functs[0].error) == NULL)
-		{
-		ERR_load_strings(0,DH_str_functs);
-		ERR_load_strings(0,DH_str_reasons);
-		}
-#endif
-	}
diff --git a/crypto/openssl/crypto/dh/dh_gen.c b/crypto/openssl/crypto/dh/dh_gen.c
deleted file mode 100644
index cfd5b118681e..000000000000
--- a/crypto/openssl/crypto/dh/dh_gen.c
+++ /dev/null
@@ -1,175 +0,0 @@
-/* crypto/dh/dh_gen.c */
-/* Copyright (C) 1995-1998 Eric Young (eay@cryptsoft.com)
- * All rights reserved.
- *
- * This package is an SSL implementation written
- * by Eric Young (eay@cryptsoft.com).
- * The implementation was written so as to conform with Netscapes SSL.
- * 
- * This library is free for commercial and non-commercial use as long as
- * the following conditions are aheared to.  The following conditions
- * apply to all code found in this distribution, be it the RC4, RSA,
- * lhash, DES, etc., code; not just the SSL code.  The SSL documentation
- * included with this distribution is covered by the same copyright terms
- * except that the holder is Tim Hudson (tjh@cryptsoft.com).
- * 
- * Copyright remains Eric Young's, and as such any Copyright notices in
- * the code are not to be removed.
- * If this package is used in a product, Eric Young should be given attribution
- * as the author of the parts of the library used.
- * This can be in the form of a textual message at program startup or
- * in documentation (online or textual) provided with the package.
- * 
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions
- * are met:
- * 1. Redistributions of source code must retain the copyright
- *    notice, this list of conditions and the following disclaimer.
- * 2. Redistributions in binary form must reproduce the above copyright
- *    notice, this list of conditions and the following disclaimer in the
- *    documentation and/or other materials provided with the distribution.
- * 3. All advertising materials mentioning features or use of this software
- *    must display the following acknowledgement:
- *    "This product includes cryptographic software written by
- *     Eric Young (eay@cryptsoft.com)"
- *    The word 'cryptographic' can be left out if the rouines from the library
- *    being used are not cryptographic related :-).
- * 4. If you include any Windows specific code (or a derivative thereof) from 
- *    the apps directory (application code) you must include an acknowledgement:
- *    "This product includes software written by Tim Hudson (tjh@cryptsoft.com)"
- * 
- * THIS SOFTWARE IS PROVIDED BY ERIC YOUNG ``AS IS'' AND
- * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
- * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
- * ARE DISCLAIMED.  IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE
- * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
- * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
- * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
- * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
- * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
- * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
- * SUCH DAMAGE.
- * 
- * The licence and distribution terms for any publically available version or
- * derivative of this code cannot be changed.  i.e. this code cannot simply be
- * copied and put under another distribution licence
- * [including the GNU Public Licence.]
- */
-
-/* NB: These functions have been upgraded - the previous prototypes are in
- * dh_depr.c as wrappers to these ones.
- *  - Geoff
- */
-
-#include <stdio.h>
-#include "cryptlib.h"
-#include <openssl/bn.h>
-#include <openssl/dh.h>
-
-static int dh_builtin_genparams(DH *ret, int prime_len, int generator, BN_GENCB *cb);
-
-int DH_generate_parameters_ex(DH *ret, int prime_len, int generator, BN_GENCB *cb)
-	{
-	if(ret->meth->generate_params)
-		return ret->meth->generate_params(ret, prime_len, generator, cb);
-	return dh_builtin_genparams(ret, prime_len, generator, cb);
-	}
-
-/* We generate DH parameters as follows
- * find a prime q which is prime_len/2 bits long.
- * p=(2*q)+1 or (p-1)/2 = q
- * For this case, g is a generator if
- * g^((p-1)/q) mod p != 1 for values of q which are the factors of p-1.
- * Since the factors of p-1 are q and 2, we just need to check
- * g^2 mod p != 1 and g^q mod p != 1.
- *
- * Having said all that,
- * there is another special case method for the generators 2, 3 and 5.
- * for 2, p mod 24 == 11
- * for 3, p mod 12 == 5  <<<<< does not work for safe primes.
- * for 5, p mod 10 == 3 or 7
- *
- * Thanks to Phil Karn <karn@qualcomm.com> for the pointers about the
- * special generators and for answering some of my questions.
- *
- * I've implemented the second simple method :-).
- * Since DH should be using a safe prime (both p and q are prime),
- * this generator function can take a very very long time to run.
- */
-/* Actually there is no reason to insist that 'generator' be a generator.
- * It's just as OK (and in some sense better) to use a generator of the
- * order-q subgroup.
- */
-static int dh_builtin_genparams(DH *ret, int prime_len, int generator, BN_GENCB *cb)
-	{
-	BIGNUM *t1,*t2;
-	int g,ok= -1;
-	BN_CTX *ctx=NULL;
-
-	ctx=BN_CTX_new();
-	if (ctx == NULL) goto err;
-	BN_CTX_start(ctx);
-	t1 = BN_CTX_get(ctx);
-	t2 = BN_CTX_get(ctx);
-	if (t1 == NULL || t2 == NULL) goto err;
-
-	/* Make sure 'ret' has the necessary elements */
-	if(!ret->p && ((ret->p = BN_new()) == NULL)) goto err;
-	if(!ret->g && ((ret->g = BN_new()) == NULL)) goto err;
-	
-	if (generator <= 1)
-		{
-		DHerr(DH_F_DH_BUILTIN_GENPARAMS, DH_R_BAD_GENERATOR);
-		goto err;
-		}
-	if (generator == DH_GENERATOR_2)
-		{
-		if (!BN_set_word(t1,24)) goto err;
-		if (!BN_set_word(t2,11)) goto err;
-		g=2;
-		}
-#if 0 /* does not work for safe primes */
-	else if (generator == DH_GENERATOR_3)
-		{
-		if (!BN_set_word(t1,12)) goto err;
-		if (!BN_set_word(t2,5)) goto err;
-		g=3;
-		}
-#endif
-	else if (generator == DH_GENERATOR_5)
-		{
-		if (!BN_set_word(t1,10)) goto err;
-		if (!BN_set_word(t2,3)) goto err;
-		/* BN_set_word(t3,7); just have to miss
-		 * out on these ones :-( */
-		g=5;
-		}
-	else
-		{
-		/* in the general case, don't worry if 'generator' is a
-		 * generator or not: since we are using safe primes,
-		 * it will generate either an order-q or an order-2q group,
-		 * which both is OK */
-		if (!BN_set_word(t1,2)) goto err;
-		if (!BN_set_word(t2,1)) goto err;
-		g=generator;
-		}
-	
-	if(!BN_generate_prime_ex(ret->p,prime_len,1,t1,t2,cb)) goto err;
-	if(!BN_GENCB_call(cb, 3, 0)) goto err;
-	if (!BN_set_word(ret->g,g)) goto err;
-	ok=1;
-err:
-	if (ok == -1)
-		{
-		DHerr(DH_F_DH_BUILTIN_GENPARAMS,ERR_R_BN_LIB);
-		ok=0;
-		}
-
-	if (ctx != NULL)
-		{
-		BN_CTX_end(ctx);
-		BN_CTX_free(ctx);
-		}
-	return ok;
-	}
diff --git a/crypto/openssl/crypto/dh/dh_key.c b/crypto/openssl/crypto/dh/dh_key.c
deleted file mode 100644
index 37a2c1bca23f..000000000000
--- a/crypto/openssl/crypto/dh/dh_key.c
+++ /dev/null
@@ -1,263 +0,0 @@
-/* crypto/dh/dh_key.c */
-/* Copyright (C) 1995-1998 Eric Young (eay@cryptsoft.com)
- * All rights reserved.
- *
- * This package is an SSL implementation written
- * by Eric Young (eay@cryptsoft.com).
- * The implementation was written so as to conform with Netscapes SSL.
- * 
- * This library is free for commercial and non-commercial use as long as
- * the following conditions are aheared to.  The following conditions
- * apply to all code found in this distribution, be it the RC4, RSA,
- * lhash, DES, etc., code; not just the SSL code.  The SSL documentation
- * included with this distribution is covered by the same copyright terms
- * except that the holder is Tim Hudson (tjh@cryptsoft.com).
- * 
- * Copyright remains Eric Young's, and as such any Copyright notices in
- * the code are not to be removed.
- * If this package is used in a product, Eric Young should be given attribution
- * as the author of the parts of the library used.
- * This can be in the form of a textual message at program startup or
- * in documentation (online or textual) provided with the package.
- * 
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions
- * are met:
- * 1. Redistributions of source code must retain the copyright
- *    notice, this list of conditions and the following disclaimer.
- * 2. Redistributions in binary form must reproduce the above copyright
- *    notice, this list of conditions and the following disclaimer in the
- *    documentation and/or other materials provided with the distribution.
- * 3. All advertising materials mentioning features or use of this software
- *    must display the following acknowledgement:
- *    "This product includes cryptographic software written by
- *     Eric Young (eay@cryptsoft.com)"
- *    The word 'cryptographic' can be left out if the rouines from the library
- *    being used are not cryptographic related :-).
- * 4. If you include any Windows specific code (or a derivative thereof) from 
- *    the apps directory (application code) you must include an acknowledgement:
- *    "This product includes software written by Tim Hudson (tjh@cryptsoft.com)"
- * 
- * THIS SOFTWARE IS PROVIDED BY ERIC YOUNG ``AS IS'' AND
- * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
- * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
- * ARE DISCLAIMED.  IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE
- * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
- * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
- * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
- * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
- * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
- * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
- * SUCH DAMAGE.
- * 
- * The licence and distribution terms for any publically available version or
- * derivative of this code cannot be changed.  i.e. this code cannot simply be
- * copied and put under another distribution licence
- * [including the GNU Public Licence.]
- */
-
-#include <stdio.h>
-#include "cryptlib.h"
-#include <openssl/bn.h>
-#include <openssl/rand.h>
-#include <openssl/dh.h>
-
-static int generate_key(DH *dh);
-static int compute_key(unsigned char *key, const BIGNUM *pub_key, DH *dh);
-static int dh_bn_mod_exp(const DH *dh, BIGNUM *r,
-			const BIGNUM *a, const BIGNUM *p,
-			const BIGNUM *m, BN_CTX *ctx,
-			BN_MONT_CTX *m_ctx);
-static int dh_init(DH *dh);
-static int dh_finish(DH *dh);
-
-int DH_generate_key(DH *dh)
-	{
-	return dh->meth->generate_key(dh);
-	}
-
-int DH_compute_key(unsigned char *key, const BIGNUM *pub_key, DH *dh)
-	{
-	return dh->meth->compute_key(key, pub_key, dh);
-	}
-
-static DH_METHOD dh_ossl = {
-"OpenSSL DH Method",
-generate_key,
-compute_key,
-dh_bn_mod_exp,
-dh_init,
-dh_finish,
-0,
-NULL,
-NULL
-};
-
-const DH_METHOD *DH_OpenSSL(void)
-{
-	return &dh_ossl;
-}
-
-static int generate_key(DH *dh)
-	{
-	int ok=0;
-	int generate_new_key=0;
-	unsigned l;
-	BN_CTX *ctx;
-	BN_MONT_CTX *mont=NULL;
-	BIGNUM *pub_key=NULL,*priv_key=NULL;
-
-	ctx = BN_CTX_new();
-	if (ctx == NULL) goto err;
-
-	if (dh->priv_key == NULL)
-		{
-		priv_key=BN_new();
-		if (priv_key == NULL) goto err;
-		generate_new_key=1;
-		}
-	else
-		priv_key=dh->priv_key;
-
-	if (dh->pub_key == NULL)
-		{
-		pub_key=BN_new();
-		if (pub_key == NULL) goto err;
-		}
-	else
-		pub_key=dh->pub_key;
-
-
-	if (dh->flags & DH_FLAG_CACHE_MONT_P)
-		{
-		mont = BN_MONT_CTX_set_locked(&dh->method_mont_p,
-				CRYPTO_LOCK_DH, dh->p, ctx);
-		if (!mont)
-			goto err;
-		}
-
-	if (generate_new_key)
-		{
-		l = dh->length ? dh->length : BN_num_bits(dh->p)-1; /* secret exponent length */
-		if (!BN_rand(priv_key, l, 0, 0)) goto err;
-		}
-
-	{
-		BIGNUM local_prk;
-		BIGNUM *prk;
-
-		if ((dh->flags & DH_FLAG_NO_EXP_CONSTTIME) == 0)
-			{
-			BN_init(&local_prk);
-			prk = &local_prk;
-			BN_with_flags(prk, priv_key, BN_FLG_EXP_CONSTTIME);
-			}
-		else
-			prk = priv_key;
-
-		if (!dh->meth->bn_mod_exp(dh, pub_key, dh->g, prk, dh->p, ctx, mont)) goto err;
-	}
-		
-	dh->pub_key=pub_key;
-	dh->priv_key=priv_key;
-	ok=1;
-err:
-	if (ok != 1)
-		DHerr(DH_F_GENERATE_KEY,ERR_R_BN_LIB);
-
-	if ((pub_key != NULL)  && (dh->pub_key == NULL))  BN_free(pub_key);
-	if ((priv_key != NULL) && (dh->priv_key == NULL)) BN_free(priv_key);
-	BN_CTX_free(ctx);
-	return(ok);
-	}
-
-static int compute_key(unsigned char *key, const BIGNUM *pub_key, DH *dh)
-	{
-	BN_CTX *ctx=NULL;
-	BN_MONT_CTX *mont=NULL;
-	BIGNUM *tmp;
-	int ret= -1;
-        int check_result;
-
-	if (BN_num_bits(dh->p) > OPENSSL_DH_MAX_MODULUS_BITS)
-		{
-		DHerr(DH_F_COMPUTE_KEY,DH_R_MODULUS_TOO_LARGE);
-		goto err;
-		}
-
-	ctx = BN_CTX_new();
-	if (ctx == NULL) goto err;
-	BN_CTX_start(ctx);
-	tmp = BN_CTX_get(ctx);
-	
-	if (dh->priv_key == NULL)
-		{
-		DHerr(DH_F_COMPUTE_KEY,DH_R_NO_PRIVATE_VALUE);
-		goto err;
-		}
-
-	if (dh->flags & DH_FLAG_CACHE_MONT_P)
-		{
-		mont = BN_MONT_CTX_set_locked(&dh->method_mont_p,
-				CRYPTO_LOCK_DH, dh->p, ctx);
-		if ((dh->flags & DH_FLAG_NO_EXP_CONSTTIME) == 0)
-			{
-			/* XXX */
-			BN_set_flags(dh->priv_key, BN_FLG_EXP_CONSTTIME);
-			}
-		if (!mont)
-			goto err;
-		}
-
-        if (!DH_check_pub_key(dh, pub_key, &check_result) || check_result)
-		{
-		DHerr(DH_F_COMPUTE_KEY,DH_R_INVALID_PUBKEY);
-		goto err;
-		}
-
-	if (!dh->meth->bn_mod_exp(dh, tmp, pub_key, dh->priv_key,dh->p,ctx,mont))
-		{
-		DHerr(DH_F_COMPUTE_KEY,ERR_R_BN_LIB);
-		goto err;
-		}
-
-	ret=BN_bn2bin(tmp,key);
-err:
-	if (ctx != NULL)
-		{
-		BN_CTX_end(ctx);
-		BN_CTX_free(ctx);
-		}
-	return(ret);
-	}
-
-static int dh_bn_mod_exp(const DH *dh, BIGNUM *r,
-			const BIGNUM *a, const BIGNUM *p,
-			const BIGNUM *m, BN_CTX *ctx,
-			BN_MONT_CTX *m_ctx)
-	{
-	/* If a is only one word long and constant time is false, use the faster
-	 * exponenentiation function.
-	 */
-	if (a->top == 1 && ((dh->flags & DH_FLAG_NO_EXP_CONSTTIME) != 0))
-		{
-		BN_ULONG A = a->d[0];
-		return BN_mod_exp_mont_word(r,A,p,m,ctx,m_ctx);
-		}
-	else
-		return BN_mod_exp_mont(r,a,p,m,ctx,m_ctx);
-	}
-
-
-static int dh_init(DH *dh)
-	{
-	dh->flags |= DH_FLAG_CACHE_MONT_P;
-	return(1);
-	}
-
-static int dh_finish(DH *dh)
-	{
-	if(dh->method_mont_p)
-		BN_MONT_CTX_free(dh->method_mont_p);
-	return(1);
-	}
diff --git a/crypto/openssl/crypto/dh/dh_lib.c b/crypto/openssl/crypto/dh/dh_lib.c
deleted file mode 100644
index 7aef080e7abb..000000000000
--- a/crypto/openssl/crypto/dh/dh_lib.c
+++ /dev/null
@@ -1,247 +0,0 @@
-/* crypto/dh/dh_lib.c */
-/* Copyright (C) 1995-1998 Eric Young (eay@cryptsoft.com)
- * All rights reserved.
- *
- * This package is an SSL implementation written
- * by Eric Young (eay@cryptsoft.com).
- * The implementation was written so as to conform with Netscapes SSL.
- * 
- * This library is free for commercial and non-commercial use as long as
- * the following conditions are aheared to.  The following conditions
- * apply to all code found in this distribution, be it the RC4, RSA,
- * lhash, DES, etc., code; not just the SSL code.  The SSL documentation
- * included with this distribution is covered by the same copyright terms
- * except that the holder is Tim Hudson (tjh@cryptsoft.com).
- * 
- * Copyright remains Eric Young's, and as such any Copyright notices in
- * the code are not to be removed.
- * If this package is used in a product, Eric Young should be given attribution
- * as the author of the parts of the library used.
- * This can be in the form of a textual message at program startup or
- * in documentation (online or textual) provided with the package.
- * 
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions
- * are met:
- * 1. Redistributions of source code must retain the copyright
- *    notice, this list of conditions and the following disclaimer.
- * 2. Redistributions in binary form must reproduce the above copyright
- *    notice, this list of conditions and the following disclaimer in the
- *    documentation and/or other materials provided with the distribution.
- * 3. All advertising materials mentioning features or use of this software
- *    must display the following acknowledgement:
- *    "This product includes cryptographic software written by
- *     Eric Young (eay@cryptsoft.com)"
- *    The word 'cryptographic' can be left out if the rouines from the library
- *    being used are not cryptographic related :-).
- * 4. If you include any Windows specific code (or a derivative thereof) from 
- *    the apps directory (application code) you must include an acknowledgement:
- *    "This product includes software written by Tim Hudson (tjh@cryptsoft.com)"
- * 
- * THIS SOFTWARE IS PROVIDED BY ERIC YOUNG ``AS IS'' AND
- * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
- * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
- * ARE DISCLAIMED.  IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE
- * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
- * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
- * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
- * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
- * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
- * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
- * SUCH DAMAGE.
- * 
- * The licence and distribution terms for any publically available version or
- * derivative of this code cannot be changed.  i.e. this code cannot simply be
- * copied and put under another distribution licence
- * [including the GNU Public Licence.]
- */
-
-#include <stdio.h>
-#include "cryptlib.h"
-#include <openssl/bn.h>
-#include <openssl/dh.h>
-#ifndef OPENSSL_NO_ENGINE
-#include <openssl/engine.h>
-#endif
-
-const char DH_version[]="Diffie-Hellman" OPENSSL_VERSION_PTEXT;
-
-static const DH_METHOD *default_DH_method = NULL;
-
-void DH_set_default_method(const DH_METHOD *meth)
-	{
-	default_DH_method = meth;
-	}
-
-const DH_METHOD *DH_get_default_method(void)
-	{
-	if(!default_DH_method)
-		default_DH_method = DH_OpenSSL();
-	return default_DH_method;
-	}
-
-int DH_set_method(DH *dh, const DH_METHOD *meth)
-	{
-	/* NB: The caller is specifically setting a method, so it's not up to us
-	 * to deal with which ENGINE it comes from. */
-        const DH_METHOD *mtmp;
-        mtmp = dh->meth;
-        if (mtmp->finish) mtmp->finish(dh);
-#ifndef OPENSSL_NO_ENGINE
-	if (dh->engine)
-		{
-		ENGINE_finish(dh->engine);
-		dh->engine = NULL;
-		}
-#endif
-        dh->meth = meth;
-        if (meth->init) meth->init(dh);
-        return 1;
-	}
-
-DH *DH_new(void)
-	{
-	return DH_new_method(NULL);
-	}
-
-DH *DH_new_method(ENGINE *engine)
-	{
-	DH *ret;
-
-	ret=(DH *)OPENSSL_malloc(sizeof(DH));
-	if (ret == NULL)
-		{
-		DHerr(DH_F_DH_NEW_METHOD,ERR_R_MALLOC_FAILURE);
-		return(NULL);
-		}
-
-	ret->meth = DH_get_default_method();
-#ifndef OPENSSL_NO_ENGINE
-	if (engine)
-		{
-		if (!ENGINE_init(engine))
-			{
-			DHerr(DH_F_DH_NEW_METHOD, ERR_R_ENGINE_LIB);
-			OPENSSL_free(ret);
-			return NULL;
-			}
-		ret->engine = engine;
-		}
-	else
-		ret->engine = ENGINE_get_default_DH();
-	if(ret->engine)
-		{
-		ret->meth = ENGINE_get_DH(ret->engine);
-		if(!ret->meth)
-			{
-			DHerr(DH_F_DH_NEW_METHOD,ERR_R_ENGINE_LIB);
-			ENGINE_finish(ret->engine);
-			OPENSSL_free(ret);
-			return NULL;
-			}
-		}
-#endif
-
-	ret->pad=0;
-	ret->version=0;
-	ret->p=NULL;
-	ret->g=NULL;
-	ret->length=0;
-	ret->pub_key=NULL;
-	ret->priv_key=NULL;
-	ret->q=NULL;
-	ret->j=NULL;
-	ret->seed = NULL;
-	ret->seedlen = 0;
-	ret->counter = NULL;
-	ret->method_mont_p=NULL;
-	ret->references = 1;
-	ret->flags=ret->meth->flags;
-	CRYPTO_new_ex_data(CRYPTO_EX_INDEX_DH, ret, &ret->ex_data);
-	if ((ret->meth->init != NULL) && !ret->meth->init(ret))
-		{
-#ifndef OPENSSL_NO_ENGINE
-		if (ret->engine)
-			ENGINE_finish(ret->engine);
-#endif
-		CRYPTO_free_ex_data(CRYPTO_EX_INDEX_DH, ret, &ret->ex_data);
-		OPENSSL_free(ret);
-		ret=NULL;
-		}
-	return(ret);
-	}
-
-void DH_free(DH *r)
-	{
-	int i;
-	if(r == NULL) return;
-	i = CRYPTO_add(&r->references, -1, CRYPTO_LOCK_DH);
-#ifdef REF_PRINT
-	REF_PRINT("DH",r);
-#endif
-	if (i > 0) return;
-#ifdef REF_CHECK
-	if (i < 0)
-		{
-		fprintf(stderr,"DH_free, bad reference count\n");
-		abort();
-	}
-#endif
-
-	if (r->meth->finish)
-		r->meth->finish(r);
-#ifndef OPENSSL_NO_ENGINE
-	if (r->engine)
-		ENGINE_finish(r->engine);
-#endif
-
-	CRYPTO_free_ex_data(CRYPTO_EX_INDEX_DH, r, &r->ex_data);
-
-	if (r->p != NULL) BN_clear_free(r->p);
-	if (r->g != NULL) BN_clear_free(r->g);
-	if (r->q != NULL) BN_clear_free(r->q);
-	if (r->j != NULL) BN_clear_free(r->j);
-	if (r->seed) OPENSSL_free(r->seed);
-	if (r->counter != NULL) BN_clear_free(r->counter);
-	if (r->pub_key != NULL) BN_clear_free(r->pub_key);
-	if (r->priv_key != NULL) BN_clear_free(r->priv_key);
-	OPENSSL_free(r);
-	}
-
-int DH_up_ref(DH *r)
-	{
-	int i = CRYPTO_add(&r->references, 1, CRYPTO_LOCK_DH);
-#ifdef REF_PRINT
-	REF_PRINT("DH",r);
-#endif
-#ifdef REF_CHECK
-	if (i < 2)
-		{
-		fprintf(stderr, "DH_up, bad reference count\n");
-		abort();
-		}
-#endif
-	return ((i > 1) ? 1 : 0);
-	}
-
-int DH_get_ex_new_index(long argl, void *argp, CRYPTO_EX_new *new_func,
-	     CRYPTO_EX_dup *dup_func, CRYPTO_EX_free *free_func)
-        {
-	return CRYPTO_get_ex_new_index(CRYPTO_EX_INDEX_DH, argl, argp,
-				new_func, dup_func, free_func);
-        }
-
-int DH_set_ex_data(DH *d, int idx, void *arg)
-	{
-	return(CRYPTO_set_ex_data(&d->ex_data,idx,arg));
-	}
-
-void *DH_get_ex_data(DH *d, int idx)
-	{
-	return(CRYPTO_get_ex_data(&d->ex_data,idx));
-	}
-
-int DH_size(const DH *dh)
-	{
-	return(BN_num_bytes(dh->p));
-	}
diff --git a/crypto/openssl/crypto/dh/dhtest.c b/crypto/openssl/crypto/dh/dhtest.c
deleted file mode 100644
index 882f5c310a79..000000000000
--- a/crypto/openssl/crypto/dh/dhtest.c
+++ /dev/null
@@ -1,226 +0,0 @@
-/* crypto/dh/dhtest.c */
-/* Copyright (C) 1995-1998 Eric Young (eay@cryptsoft.com)
- * All rights reserved.
- *
- * This package is an SSL implementation written
- * by Eric Young (eay@cryptsoft.com).
- * The implementation was written so as to conform with Netscapes SSL.
- * 
- * This library is free for commercial and non-commercial use as long as
- * the following conditions are aheared to.  The following conditions
- * apply to all code found in this distribution, be it the RC4, RSA,
- * lhash, DES, etc., code; not just the SSL code.  The SSL documentation
- * included with this distribution is covered by the same copyright terms
- * except that the holder is Tim Hudson (tjh@cryptsoft.com).
- * 
- * Copyright remains Eric Young's, and as such any Copyright notices in
- * the code are not to be removed.
- * If this package is used in a product, Eric Young should be given attribution
- * as the author of the parts of the library used.
- * This can be in the form of a textual message at program startup or
- * in documentation (online or textual) provided with the package.
- * 
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions
- * are met:
- * 1. Redistributions of source code must retain the copyright
- *    notice, this list of conditions and the following disclaimer.
- * 2. Redistributions in binary form must reproduce the above copyright
- *    notice, this list of conditions and the following disclaimer in the
- *    documentation and/or other materials provided with the distribution.
- * 3. All advertising materials mentioning features or use of this software
- *    must display the following acknowledgement:
- *    "This product includes cryptographic software written by
- *     Eric Young (eay@cryptsoft.com)"
- *    The word 'cryptographic' can be left out if the rouines from the library
- *    being used are not cryptographic related :-).
- * 4. If you include any Windows specific code (or a derivative thereof) from 
- *    the apps directory (application code) you must include an acknowledgement:
- *    "This product includes software written by Tim Hudson (tjh@cryptsoft.com)"
- * 
- * THIS SOFTWARE IS PROVIDED BY ERIC YOUNG ``AS IS'' AND
- * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
- * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
- * ARE DISCLAIMED.  IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE
- * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
- * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
- * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
- * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
- * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
- * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
- * SUCH DAMAGE.
- * 
- * The licence and distribution terms for any publically available version or
- * derivative of this code cannot be changed.  i.e. this code cannot simply be
- * copied and put under another distribution licence
- * [including the GNU Public Licence.]
- */
-
-/* Until the key-gen callbacks are modified to use newer prototypes, we allow
- * deprecated functions for openssl-internal code */
-#ifdef OPENSSL_NO_DEPRECATED
-#undef OPENSSL_NO_DEPRECATED
-#endif
-
-#include <stdio.h>
-#include <stdlib.h>
-#include <string.h>
-
-#include "../e_os.h"
-
-#include <openssl/crypto.h>
-#include <openssl/bio.h>
-#include <openssl/bn.h>
-#include <openssl/rand.h>
-#include <openssl/err.h>
-
-#ifdef OPENSSL_NO_DH
-int main(int argc, char *argv[])
-{
-    printf("No DH support\n");
-    return(0);
-}
-#else
-#include <openssl/dh.h>
-
-#ifdef OPENSSL_SYS_WIN16
-#define MS_CALLBACK	_far _loadds
-#else
-#define MS_CALLBACK
-#endif
-
-static int MS_CALLBACK cb(int p, int n, BN_GENCB *arg);
-
-static const char rnd_seed[] = "string to make the random number generator think it has entropy";
-
-int main(int argc, char *argv[])
-	{
-	BN_GENCB _cb;
-	DH *a;
-	DH *b=NULL;
-	char buf[12];
-	unsigned char *abuf=NULL,*bbuf=NULL;
-	int i,alen,blen,aout,bout,ret=1;
-	BIO *out;
-
-	CRYPTO_malloc_debug_init();
-	CRYPTO_dbg_set_options(V_CRYPTO_MDEBUG_ALL);
-	CRYPTO_mem_ctrl(CRYPTO_MEM_CHECK_ON);
-
-#ifdef OPENSSL_SYS_WIN32
-	CRYPTO_malloc_init();
-#endif
-
-	RAND_seed(rnd_seed, sizeof rnd_seed);
-
-	out=BIO_new(BIO_s_file());
-	if (out == NULL) EXIT(1);
-	BIO_set_fp(out,stdout,BIO_NOCLOSE);
-
-	BN_GENCB_set(&_cb, &cb, out);
-	if(((a = DH_new()) == NULL) || !DH_generate_parameters_ex(a, 64,
-				DH_GENERATOR_5, &_cb))
-		goto err;
-
-	if (!DH_check(a, &i)) goto err;
-	if (i & DH_CHECK_P_NOT_PRIME)
-		BIO_puts(out, "p value is not prime\n");
-	if (i & DH_CHECK_P_NOT_SAFE_PRIME)
-		BIO_puts(out, "p value is not a safe prime\n");
-	if (i & DH_UNABLE_TO_CHECK_GENERATOR)
-		BIO_puts(out, "unable to check the generator value\n");
-	if (i & DH_NOT_SUITABLE_GENERATOR)
-		BIO_puts(out, "the g value is not a generator\n");
-
-	BIO_puts(out,"\np    =");
-	BN_print(out,a->p);
-	BIO_puts(out,"\ng    =");
-	BN_print(out,a->g);
-	BIO_puts(out,"\n");
-
-	b=DH_new();
-	if (b == NULL) goto err;
-
-	b->p=BN_dup(a->p);
-	b->g=BN_dup(a->g);
-	if ((b->p == NULL) || (b->g == NULL)) goto err;
-
-	/* Set a to run with normal modexp and b to use constant time */
-	a->flags &= ~DH_FLAG_NO_EXP_CONSTTIME;
-	b->flags |= DH_FLAG_NO_EXP_CONSTTIME;
-
-	if (!DH_generate_key(a)) goto err;
-	BIO_puts(out,"pri 1=");
-	BN_print(out,a->priv_key);
-	BIO_puts(out,"\npub 1=");
-	BN_print(out,a->pub_key);
-	BIO_puts(out,"\n");
-
-	if (!DH_generate_key(b)) goto err;
-	BIO_puts(out,"pri 2=");
-	BN_print(out,b->priv_key);
-	BIO_puts(out,"\npub 2=");
-	BN_print(out,b->pub_key);
-	BIO_puts(out,"\n");
-
-	alen=DH_size(a);
-	abuf=(unsigned char *)OPENSSL_malloc(alen);
-	aout=DH_compute_key(abuf,b->pub_key,a);
-
-	BIO_puts(out,"key1 =");
-	for (i=0; i<aout; i++)
-		{
-		sprintf(buf,"%02X",abuf[i]);
-		BIO_puts(out,buf);
-		}
-	BIO_puts(out,"\n");
-
-	blen=DH_size(b);
-	bbuf=(unsigned char *)OPENSSL_malloc(blen);
-	bout=DH_compute_key(bbuf,a->pub_key,b);
-
-	BIO_puts(out,"key2 =");
-	for (i=0; i<bout; i++)
-		{
-		sprintf(buf,"%02X",bbuf[i]);
-		BIO_puts(out,buf);
-		}
-	BIO_puts(out,"\n");
-	if ((aout < 4) || (bout != aout) || (memcmp(abuf,bbuf,aout) != 0))
-		{
-		fprintf(stderr,"Error in DH routines\n");
-		ret=1;
-		}
-	else
-		ret=0;
-err:
-	ERR_print_errors_fp(stderr);
-
-	if (abuf != NULL) OPENSSL_free(abuf);
-	if (bbuf != NULL) OPENSSL_free(bbuf);
-	if(b != NULL) DH_free(b);
-	if(a != NULL) DH_free(a);
-	BIO_free(out);
-#ifdef OPENSSL_SYS_NETWARE
-    if (ret) printf("ERROR: %d\n", ret);
-#endif
-	EXIT(ret);
-	return(ret);
-	}
-
-static int MS_CALLBACK cb(int p, int n, BN_GENCB *arg)
-	{
-	char c='*';
-
-	if (p == 0) c='.';
-	if (p == 1) c='+';
-	if (p == 2) c='*';
-	if (p == 3) c='\n';
-	BIO_write(arg->arg,&c,1);
-	(void)BIO_flush(arg->arg);
-#ifdef LINT
-	p=n;
-#endif
-	return 1;
-	}
-#endif
diff --git a/crypto/openssl/crypto/dh/example b/crypto/openssl/crypto/dh/example
deleted file mode 100644
index 16a33d2910f1..000000000000
--- a/crypto/openssl/crypto/dh/example
+++ /dev/null
@@ -1,50 +0,0 @@
-From owner-cypherpunks@toad.com Mon Sep 25 10:50:51 1995
-Received: from minbne.mincom.oz.au by orb.mincom.oz.au with SMTP id AA10562
-  (5.65c/IDA-1.4.4 for eay); Wed, 27 Sep 1995 19:41:55 +1000
-Received: by minbne.mincom.oz.au id AA19958
-  (5.65c/IDA-1.4.4 for eay@orb.mincom.oz.au); Wed, 27 Sep 1995 19:34:59 +1000
-Received: from relay3.UU.NET by bunyip.cc.uq.oz.au with SMTP (PP);
-          Wed, 27 Sep 1995 19:13:05 +1000
-Received: from toad.com by relay3.UU.NET with SMTP id QQzizb16156;
-          Wed, 27 Sep 1995 04:48:46 -0400
-Received: by toad.com id AA07905; Tue, 26 Sep 95 06:31:45 PDT
-Received: from by toad.com id AB07851; Tue, 26 Sep 95 06:31:40 PDT
-Received: from servo.qualcomm.com (servo.qualcomm.com [129.46.128.14]) 
-          by cygnus.com (8.6.12/8.6.9) with ESMTP id RAA18442 
-          for <cypherpunks@toad.com>; Mon, 25 Sep 1995 17:52:47 -0700
-Received: (karn@localhost) by servo.qualcomm.com (8.6.12/QC-BSD-2.5.1) 
-          id RAA14732; Mon, 25 Sep 1995 17:50:51 -0700
-Date: Mon, 25 Sep 1995 17:50:51 -0700
-From: Phil Karn <karn@qualcomm.com>
-Message-Id: <199509260050.RAA14732@servo.qualcomm.com>
-To: cypherpunks@toad.com, ipsec-dev@eit.com
-Subject: Primality verification needed
-Sender: owner-cypherpunks@toad.com
-Precedence: bulk
-Status: RO
-X-Status: 
-
-Hi. I've generated a 2047-bit "strong" prime number that I would like to
-use with Diffie-Hellman key exchange. I assert that not only is this number
-'p' prime, but so is (p-1)/2.
-
-I've used the mpz_probab_prime() function in the Gnu Math Package (GMP) version
-1.3.2 to test this number. This function uses the Miller-Rabin primality test.
-However, to increase my confidence that this number really is a strong prime,
-I'd like to ask others to confirm it with other tests. Here's the number in hex:
-
-72a925f760b2f954ed287f1b0953f3e6aef92e456172f9fe86fdd8822241b9c9788fbc289982743e
-fbcd2ccf062b242d7a567ba8bbb40d79bca7b8e0b6c05f835a5b938d985816bc648985adcff5402a
-a76756b36c845a840a1d059ce02707e19cf47af0b5a882f32315c19d1b86a56c5389c5e9bee16b65
-fde7b1a8d74a7675de9b707d4c5a4633c0290c95ff30a605aeb7ae864ff48370f13cf01d49adb9f2
-3d19a439f753ee7703cf342d87f431105c843c78ca4df639931f3458fae8a94d1687e99a76ed99d0
-ba87189f42fd31ad8262c54a8cf5914ae6c28c540d714a5f6087a171fb74f4814c6f968d72386ef3
-56a05180c3bec7ddd5ef6fe76b1f717b
-
-The generator, g, for this prime is 2.
-
-Thanks!
-
-Phil Karn
-
-
diff --git a/crypto/openssl/crypto/dh/generate b/crypto/openssl/crypto/dh/generate
deleted file mode 100644
index 5d407231df5b..000000000000
--- a/crypto/openssl/crypto/dh/generate
+++ /dev/null
@@ -1,65 +0,0 @@
-From: stewarts@ix.netcom.com (Bill Stewart)
-Newsgroups: sci.crypt
-Subject: Re: Diffie-Hellman key exchange
-Date: Wed, 11 Oct 1995 23:08:28 GMT
-Organization: Freelance Information Architect
-Lines: 32
-Message-ID: <45hir2$7l8@ixnews7.ix.netcom.com>
-References: <458rhn$76m$1@mhadf.production.compuserve.com>
-NNTP-Posting-Host: ix-pl4-16.ix.netcom.com
-X-NETCOM-Date: Wed Oct 11  4:09:22 PM PDT 1995
-X-Newsreader: Forte Free Agent 1.0.82
-
-Kent Briggs <72124.3234@CompuServe.COM> wrote:
-
->I have a copy of the 1976 IEEE article describing the
->Diffie-Hellman public key exchange algorithm: y=a^x mod q.  I'm
->looking for sources that give examples of secure a,q pairs and
->possible some source code that I could examine.
-
-q should be prime, and ideally should be a "strong prime",
-which means it's of the form 2n+1 where n is also prime.
-q also needs to be long enough to prevent the attacks LaMacchia and
-Odlyzko described (some variant on a factoring attack which generates
-a large pile of simultaneous equations and then solves them);
-long enough is about the same size as factoring, so 512 bits may not
-be secure enough for most applications.  (The 192 bits used by
-"secure NFS" was certainly not long enough.)
-
-a should be a generator for q, which means it needs to be
-relatively prime to q-1.   Usually a small prime like 2, 3 or 5 will
-work.  
-
-....
-
-Date: Tue, 26 Sep 1995 13:52:36 MST
-From: "Richard Schroeppel" <rcs@cs.arizona.edu>
-To: karn
-Cc: ho@cs.arizona.edu
-Subject: random large primes
-
-Since your prime is really random, proving it is hard.
-My personal limit on rigorously proved primes is ~350 digits.
-If you really want a proof, we should talk to Francois Morain,
-or the Australian group.
-
-If you want 2 to be a generator (mod P), then you need it
-to be a non-square.  If (P-1)/2 is also prime, then
-non-square == primitive-root for bases << P.
-
-In the case at hand, this means 2 is a generator iff P = 11 (mod 24).
-If you want this, you should restrict your sieve accordingly.
-
-3 is a generator iff P = 5 (mod 12).
-
-5 is a generator iff P = 3 or 7 (mod 10).
-
-2 is perfectly usable as a base even if it's a non-generator, since
-it still covers half the space of possible residues.  And an
-eavesdropper can always determine the low-bit of your exponent for
-a generator anyway.
-
-Rich  rcs@cs.arizona.edu
-
-
-
diff --git a/crypto/openssl/crypto/dh/p1024.c b/crypto/openssl/crypto/dh/p1024.c
deleted file mode 100644
index 368ceca4eb06..000000000000
--- a/crypto/openssl/crypto/dh/p1024.c
+++ /dev/null
@@ -1,92 +0,0 @@
-/* crypto/dh/p1024.c */
-/* Copyright (C) 1995-1998 Eric Young (eay@cryptsoft.com)
- * All rights reserved.
- *
- * This package is an SSL implementation written
- * by Eric Young (eay@cryptsoft.com).
- * The implementation was written so as to conform with Netscapes SSL.
- * 
- * This library is free for commercial and non-commercial use as long as
- * the following conditions are aheared to.  The following conditions
- * apply to all code found in this distribution, be it the RC4, RSA,
- * lhash, DES, etc., code; not just the SSL code.  The SSL documentation
- * included with this distribution is covered by the same copyright terms
- * except that the holder is Tim Hudson (tjh@cryptsoft.com).
- * 
- * Copyright remains Eric Young's, and as such any Copyright notices in
- * the code are not to be removed.
- * If this package is used in a product, Eric Young should be given attribution
- * as the author of the parts of the library used.
- * This can be in the form of a textual message at program startup or
- * in documentation (online or textual) provided with the package.
- * 
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions
- * are met:
- * 1. Redistributions of source code must retain the copyright
- *    notice, this list of conditions and the following disclaimer.
- * 2. Redistributions in binary form must reproduce the above copyright
- *    notice, this list of conditions and the following disclaimer in the
- *    documentation and/or other materials provided with the distribution.
- * 3. All advertising materials mentioning features or use of this software
- *    must display the following acknowledgement:
- *    "This product includes cryptographic software written by
- *     Eric Young (eay@cryptsoft.com)"
- *    The word 'cryptographic' can be left out if the rouines from the library
- *    being used are not cryptographic related :-).
- * 4. If you include any Windows specific code (or a derivative thereof) from 
- *    the apps directory (application code) you must include an acknowledgement:
- *    "This product includes software written by Tim Hudson (tjh@cryptsoft.com)"
- * 
- * THIS SOFTWARE IS PROVIDED BY ERIC YOUNG ``AS IS'' AND
- * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
- * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
- * ARE DISCLAIMED.  IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE
- * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
- * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
- * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
- * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
- * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
- * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
- * SUCH DAMAGE.
- * 
- * The licence and distribution terms for any publically available version or
- * derivative of this code cannot be changed.  i.e. this code cannot simply be
- * copied and put under another distribution licence
- * [including the GNU Public Licence.]
- */
-
-#include <stdio.h>
-#include <openssl/bn.h>
-#include <openssl/asn1.h>
-#include <openssl/dh.h>
-#include <openssl/pem.h>
-
-unsigned char data[]={0x97,0xF6,0x42,0x61,0xCA,0xB5,0x05,0xDD,
-	0x28,0x28,0xE1,0x3F,0x1D,0x68,0xB6,0xD3,
-	0xDB,0xD0,0xF3,0x13,0x04,0x7F,0x40,0xE8,
-	0x56,0xDA,0x58,0xCB,0x13,0xB8,0xA1,0xBF,
-	0x2B,0x78,0x3A,0x4C,0x6D,0x59,0xD5,0xF9,
-	0x2A,0xFC,0x6C,0xFF,0x3D,0x69,0x3F,0x78,
-	0xB2,0x3D,0x4F,0x31,0x60,0xA9,0x50,0x2E,
-	0x3E,0xFA,0xF7,0xAB,0x5E,0x1A,0xD5,0xA6,
-	0x5E,0x55,0x43,0x13,0x82,0x8D,0xA8,0x3B,
-	0x9F,0xF2,0xD9,0x41,0xDE,0xE9,0x56,0x89,
-	0xFA,0xDA,0xEA,0x09,0x36,0xAD,0xDF,0x19,
-	0x71,0xFE,0x63,0x5B,0x20,0xAF,0x47,0x03,
-	0x64,0x60,0x3C,0x2D,0xE0,0x59,0xF5,0x4B,
-	0x65,0x0A,0xD8,0xFA,0x0C,0xF7,0x01,0x21,
-	0xC7,0x47,0x99,0xD7,0x58,0x71,0x32,0xBE,
-	0x9B,0x99,0x9B,0xB9,0xB7,0x87,0xE8,0xAB,
-	};
-
-main()
-	{
-	DH *dh;
-
-	dh=DH_new();
-	dh->p=BN_bin2bn(data,sizeof(data),NULL);
-	dh->g=BN_new();
-	BN_set_word(dh->g,2);
-	PEM_write_DHparams(stdout,dh);
-	}
diff --git a/crypto/openssl/crypto/dh/p192.c b/crypto/openssl/crypto/dh/p192.c
deleted file mode 100644
index 7bdf40410eb0..000000000000
--- a/crypto/openssl/crypto/dh/p192.c
+++ /dev/null
@@ -1,80 +0,0 @@
-/* crypto/dh/p192.c */
-/* Copyright (C) 1995-1998 Eric Young (eay@cryptsoft.com)
- * All rights reserved.
- *
- * This package is an SSL implementation written
- * by Eric Young (eay@cryptsoft.com).
- * The implementation was written so as to conform with Netscapes SSL.
- * 
- * This library is free for commercial and non-commercial use as long as
- * the following conditions are aheared to.  The following conditions
- * apply to all code found in this distribution, be it the RC4, RSA,
- * lhash, DES, etc., code; not just the SSL code.  The SSL documentation
- * included with this distribution is covered by the same copyright terms
- * except that the holder is Tim Hudson (tjh@cryptsoft.com).
- * 
- * Copyright remains Eric Young's, and as such any Copyright notices in
- * the code are not to be removed.
- * If this package is used in a product, Eric Young should be given attribution
- * as the author of the parts of the library used.
- * This can be in the form of a textual message at program startup or
- * in documentation (online or textual) provided with the package.
- * 
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions
- * are met:
- * 1. Redistributions of source code must retain the copyright
- *    notice, this list of conditions and the following disclaimer.
- * 2. Redistributions in binary form must reproduce the above copyright
- *    notice, this list of conditions and the following disclaimer in the
- *    documentation and/or other materials provided with the distribution.
- * 3. All advertising materials mentioning features or use of this software
- *    must display the following acknowledgement:
- *    "This product includes cryptographic software written by
- *     Eric Young (eay@cryptsoft.com)"
- *    The word 'cryptographic' can be left out if the rouines from the library
- *    being used are not cryptographic related :-).
- * 4. If you include any Windows specific code (or a derivative thereof) from 
- *    the apps directory (application code) you must include an acknowledgement:
- *    "This product includes software written by Tim Hudson (tjh@cryptsoft.com)"
- * 
- * THIS SOFTWARE IS PROVIDED BY ERIC YOUNG ``AS IS'' AND
- * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
- * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
- * ARE DISCLAIMED.  IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE
- * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
- * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
- * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
- * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
- * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
- * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
- * SUCH DAMAGE.
- * 
- * The licence and distribution terms for any publically available version or
- * derivative of this code cannot be changed.  i.e. this code cannot simply be
- * copied and put under another distribution licence
- * [including the GNU Public Licence.]
- */
-
-#include <stdio.h>
-#include <openssl/bn.h>
-#include <openssl/asn1.h>
-#include <openssl/dh.h>
-#include <openssl/pem.h>
-
-unsigned char data[]={
-0xD4,0xA0,0xBA,0x02,0x50,0xB6,0xFD,0x2E,
-0xC6,0x26,0xE7,0xEF,0xD6,0x37,0xDF,0x76,
-0xC7,0x16,0xE2,0x2D,0x09,0x44,0xB8,0x8B,
-	};
-
-main()
-	{
-	DH *dh;
-
-	dh=DH_new();
-	dh->p=BN_bin2bn(data,sizeof(data),NULL);
-	dh->g=BN_new();
-	BN_set_word(dh->g,3);
-	PEM_write_DHparams(stdout,dh);
-	}
diff --git a/crypto/openssl/crypto/dh/p512.c b/crypto/openssl/crypto/dh/p512.c
deleted file mode 100644
index a9b6aa83f034..000000000000
--- a/crypto/openssl/crypto/dh/p512.c
+++ /dev/null
@@ -1,85 +0,0 @@
-/* crypto/dh/p512.c */
-/* Copyright (C) 1995-1998 Eric Young (eay@cryptsoft.com)
- * All rights reserved.
- *
- * This package is an SSL implementation written
- * by Eric Young (eay@cryptsoft.com).
- * The implementation was written so as to conform with Netscapes SSL.
- * 
- * This library is free for commercial and non-commercial use as long as
- * the following conditions are aheared to.  The following conditions
- * apply to all code found in this distribution, be it the RC4, RSA,
- * lhash, DES, etc., code; not just the SSL code.  The SSL documentation
- * included with this distribution is covered by the same copyright terms
- * except that the holder is Tim Hudson (tjh@cryptsoft.com).
- * 
- * Copyright remains Eric Young's, and as such any Copyright notices in
- * the code are not to be removed.
- * If this package is used in a product, Eric Young should be given attribution
- * as the author of the parts of the library used.
- * This can be in the form of a textual message at program startup or
- * in documentation (online or textual) provided with the package.
- * 
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions
- * are met:
- * 1. Redistributions of source code must retain the copyright
- *    notice, this list of conditions and the following disclaimer.
- * 2. Redistributions in binary form must reproduce the above copyright
- *    notice, this list of conditions and the following disclaimer in the
- *    documentation and/or other materials provided with the distribution.
- * 3. All advertising materials mentioning features or use of this software
- *    must display the following acknowledgement:
- *    "This product includes cryptographic software written by
- *     Eric Young (eay@cryptsoft.com)"
- *    The word 'cryptographic' can be left out if the rouines from the library
- *    being used are not cryptographic related :-).
- * 4. If you include any Windows specific code (or a derivative thereof) from 
- *    the apps directory (application code) you must include an acknowledgement:
- *    "This product includes software written by Tim Hudson (tjh@cryptsoft.com)"
- * 
- * THIS SOFTWARE IS PROVIDED BY ERIC YOUNG ``AS IS'' AND
- * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
- * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
- * ARE DISCLAIMED.  IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE
- * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
- * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
- * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
- * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
- * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
- * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
- * SUCH DAMAGE.
- * 
- * The licence and distribution terms for any publically available version or
- * derivative of this code cannot be changed.  i.e. this code cannot simply be
- * copied and put under another distribution licence
- * [including the GNU Public Licence.]
- */
-
-#include <stdio.h>
-#include <openssl/bn.h>
-#include <openssl/asn1.h>
-#include <openssl/dh.h>
-#include <openssl/pem.h>
-
-unsigned char data[]={
-0xDA,0x58,0x3C,0x16,0xD9,0x85,0x22,0x89,
-0xD0,0xE4,0xAF,0x75,0x6F,0x4C,0xCA,0x92,
-0xDD,0x4B,0xE5,0x33,0xB8,0x04,0xFB,0x0F,
-0xED,0x94,0xEF,0x9C,0x8A,0x44,0x03,0xED,
-0x57,0x46,0x50,0xD3,0x69,0x99,0xDB,0x29,
-0xD7,0x76,0x27,0x6B,0xA2,0xD3,0xD4,0x12,
-0xE2,0x18,0xF4,0xDD,0x1E,0x08,0x4C,0xF6,
-0xD8,0x00,0x3E,0x7C,0x47,0x74,0xE8,0x33,
-	};
-
-main()
-	{
-	DH *dh;
-
-	dh=DH_new();
-	dh->p=BN_bin2bn(data,sizeof(data),NULL);
-	dh->g=BN_new();
-	BN_set_word(dh->g,2);
-	PEM_write_DHparams(stdout,dh);
-	}
diff --git a/crypto/openssl/crypto/dsa/Makefile b/crypto/openssl/crypto/dsa/Makefile
deleted file mode 100644
index 676baf7d49ce..000000000000
--- a/crypto/openssl/crypto/dsa/Makefile
+++ /dev/null
@@ -1,164 +0,0 @@
-#
-# OpenSSL/crypto/dsa/Makefile
-#
-
-DIR=	dsa
-TOP=	../..
-CC=	cc
-INCLUDES= -I.. -I$(TOP) -I../../include
-CFLAG=-g
-MAKEFILE=	Makefile
-AR=		ar r
-
-CFLAGS= $(INCLUDES) $(CFLAG)
-
-GENERAL=Makefile
-TEST=dsatest.c
-APPS=
-
-LIB=$(TOP)/libcrypto.a
-LIBSRC= dsa_gen.c dsa_key.c dsa_lib.c dsa_asn1.c dsa_vrf.c dsa_sign.c \
-	dsa_err.c dsa_ossl.c dsa_depr.c
-LIBOBJ= dsa_gen.o dsa_key.o dsa_lib.o dsa_asn1.o dsa_vrf.o dsa_sign.o \
-	dsa_err.o dsa_ossl.o dsa_depr.o
-
-SRC= $(LIBSRC)
-
-EXHEADER= dsa.h
-HEADER=	$(EXHEADER)
-
-ALL=    $(GENERAL) $(SRC) $(HEADER)
-
-top:
-	(cd ../..; $(MAKE) DIRS=crypto SDIRS=$(DIR) sub_all)
-
-all:	lib
-
-lib:	$(LIBOBJ)
-	$(AR) $(LIB) $(LIBOBJ)
-	$(RANLIB) $(LIB) || echo Never mind.
-	@touch lib
-
-files:
-	$(PERL) $(TOP)/util/files.pl Makefile >> $(TOP)/MINFO
-
-links:
-	@$(PERL) $(TOP)/util/mklink.pl ../../include/openssl $(EXHEADER)
-	@$(PERL) $(TOP)/util/mklink.pl ../../test $(TEST)
-	@$(PERL) $(TOP)/util/mklink.pl ../../apps $(APPS)
-
-install:
-	@[ -n "$(INSTALLTOP)" ] # should be set by top Makefile...
-	@headerlist="$(EXHEADER)"; for i in $$headerlist ; \
-	do  \
-	(cp $$i $(INSTALL_PREFIX)$(INSTALLTOP)/include/openssl/$$i; \
-	chmod 644 $(INSTALL_PREFIX)$(INSTALLTOP)/include/openssl/$$i ); \
-	done;
-
-tags:
-	ctags $(SRC)
-
-tests:
-
-lint:
-	lint -DLINT $(INCLUDES) $(SRC)>fluff
-
-depend:
-	@[ -n "$(MAKEDEPEND)" ] # should be set by upper Makefile...
-	$(MAKEDEPEND) -- $(CFLAG) $(INCLUDES) $(DEPFLAG) -- $(PROGS) $(LIBSRC)
-
-dclean:
-	$(PERL) -pe 'if (/^# DO NOT DELETE THIS LINE/) {print; exit(0);}' $(MAKEFILE) >Makefile.new
-	mv -f Makefile.new $(MAKEFILE)
-
-clean:
-	rm -f *.o */*.o *.obj lib tags core .pure .nfs* *.old *.bak fluff
-
-# DO NOT DELETE THIS LINE -- make depend depends on it.
-
-dsa_asn1.o: ../../e_os.h ../../include/openssl/asn1.h
-dsa_asn1.o: ../../include/openssl/asn1t.h ../../include/openssl/bio.h
-dsa_asn1.o: ../../include/openssl/buffer.h ../../include/openssl/crypto.h
-dsa_asn1.o: ../../include/openssl/dsa.h ../../include/openssl/e_os2.h
-dsa_asn1.o: ../../include/openssl/err.h ../../include/openssl/lhash.h
-dsa_asn1.o: ../../include/openssl/opensslconf.h
-dsa_asn1.o: ../../include/openssl/opensslv.h ../../include/openssl/ossl_typ.h
-dsa_asn1.o: ../../include/openssl/safestack.h ../../include/openssl/stack.h
-dsa_asn1.o: ../../include/openssl/symhacks.h ../cryptlib.h dsa_asn1.c
-dsa_depr.o: ../../e_os.h ../../include/openssl/asn1.h
-dsa_depr.o: ../../include/openssl/bio.h ../../include/openssl/bn.h
-dsa_depr.o: ../../include/openssl/buffer.h ../../include/openssl/crypto.h
-dsa_depr.o: ../../include/openssl/dsa.h ../../include/openssl/e_os2.h
-dsa_depr.o: ../../include/openssl/err.h ../../include/openssl/evp.h
-dsa_depr.o: ../../include/openssl/lhash.h ../../include/openssl/obj_mac.h
-dsa_depr.o: ../../include/openssl/objects.h ../../include/openssl/opensslconf.h
-dsa_depr.o: ../../include/openssl/opensslv.h ../../include/openssl/ossl_typ.h
-dsa_depr.o: ../../include/openssl/rand.h ../../include/openssl/safestack.h
-dsa_depr.o: ../../include/openssl/sha.h ../../include/openssl/stack.h
-dsa_depr.o: ../../include/openssl/symhacks.h ../cryptlib.h dsa_depr.c
-dsa_err.o: ../../include/openssl/bio.h ../../include/openssl/crypto.h
-dsa_err.o: ../../include/openssl/dsa.h ../../include/openssl/e_os2.h
-dsa_err.o: ../../include/openssl/err.h ../../include/openssl/lhash.h
-dsa_err.o: ../../include/openssl/opensslconf.h ../../include/openssl/opensslv.h
-dsa_err.o: ../../include/openssl/ossl_typ.h ../../include/openssl/safestack.h
-dsa_err.o: ../../include/openssl/stack.h ../../include/openssl/symhacks.h
-dsa_err.o: dsa_err.c
-dsa_gen.o: ../../e_os.h ../../include/openssl/asn1.h
-dsa_gen.o: ../../include/openssl/bio.h ../../include/openssl/bn.h
-dsa_gen.o: ../../include/openssl/buffer.h ../../include/openssl/crypto.h
-dsa_gen.o: ../../include/openssl/dsa.h ../../include/openssl/e_os2.h
-dsa_gen.o: ../../include/openssl/err.h ../../include/openssl/evp.h
-dsa_gen.o: ../../include/openssl/lhash.h ../../include/openssl/obj_mac.h
-dsa_gen.o: ../../include/openssl/objects.h ../../include/openssl/opensslconf.h
-dsa_gen.o: ../../include/openssl/opensslv.h ../../include/openssl/ossl_typ.h
-dsa_gen.o: ../../include/openssl/rand.h ../../include/openssl/safestack.h
-dsa_gen.o: ../../include/openssl/sha.h ../../include/openssl/stack.h
-dsa_gen.o: ../../include/openssl/symhacks.h ../cryptlib.h dsa_gen.c
-dsa_key.o: ../../e_os.h ../../include/openssl/bio.h ../../include/openssl/bn.h
-dsa_key.o: ../../include/openssl/buffer.h ../../include/openssl/crypto.h
-dsa_key.o: ../../include/openssl/dsa.h ../../include/openssl/e_os2.h
-dsa_key.o: ../../include/openssl/err.h ../../include/openssl/lhash.h
-dsa_key.o: ../../include/openssl/opensslconf.h ../../include/openssl/opensslv.h
-dsa_key.o: ../../include/openssl/ossl_typ.h ../../include/openssl/rand.h
-dsa_key.o: ../../include/openssl/safestack.h ../../include/openssl/stack.h
-dsa_key.o: ../../include/openssl/symhacks.h ../cryptlib.h dsa_key.c
-dsa_lib.o: ../../e_os.h ../../include/openssl/asn1.h
-dsa_lib.o: ../../include/openssl/bio.h ../../include/openssl/bn.h
-dsa_lib.o: ../../include/openssl/buffer.h ../../include/openssl/crypto.h
-dsa_lib.o: ../../include/openssl/dh.h ../../include/openssl/dsa.h
-dsa_lib.o: ../../include/openssl/e_os2.h ../../include/openssl/engine.h
-dsa_lib.o: ../../include/openssl/err.h ../../include/openssl/lhash.h
-dsa_lib.o: ../../include/openssl/opensslconf.h ../../include/openssl/opensslv.h
-dsa_lib.o: ../../include/openssl/ossl_typ.h ../../include/openssl/safestack.h
-dsa_lib.o: ../../include/openssl/stack.h ../../include/openssl/symhacks.h
-dsa_lib.o: ../cryptlib.h dsa_lib.c
-dsa_ossl.o: ../../e_os.h ../../include/openssl/asn1.h
-dsa_ossl.o: ../../include/openssl/bio.h ../../include/openssl/bn.h
-dsa_ossl.o: ../../include/openssl/buffer.h ../../include/openssl/crypto.h
-dsa_ossl.o: ../../include/openssl/dsa.h ../../include/openssl/e_os2.h
-dsa_ossl.o: ../../include/openssl/err.h ../../include/openssl/lhash.h
-dsa_ossl.o: ../../include/openssl/opensslconf.h
-dsa_ossl.o: ../../include/openssl/opensslv.h ../../include/openssl/ossl_typ.h
-dsa_ossl.o: ../../include/openssl/rand.h ../../include/openssl/safestack.h
-dsa_ossl.o: ../../include/openssl/stack.h ../../include/openssl/symhacks.h
-dsa_ossl.o: ../cryptlib.h dsa_ossl.c
-dsa_sign.o: ../../e_os.h ../../include/openssl/asn1.h
-dsa_sign.o: ../../include/openssl/bio.h ../../include/openssl/bn.h
-dsa_sign.o: ../../include/openssl/buffer.h ../../include/openssl/crypto.h
-dsa_sign.o: ../../include/openssl/dsa.h ../../include/openssl/e_os2.h
-dsa_sign.o: ../../include/openssl/err.h ../../include/openssl/lhash.h
-dsa_sign.o: ../../include/openssl/opensslconf.h
-dsa_sign.o: ../../include/openssl/opensslv.h ../../include/openssl/ossl_typ.h
-dsa_sign.o: ../../include/openssl/rand.h ../../include/openssl/safestack.h
-dsa_sign.o: ../../include/openssl/stack.h ../../include/openssl/symhacks.h
-dsa_sign.o: ../cryptlib.h dsa_sign.c
-dsa_vrf.o: ../../e_os.h ../../include/openssl/asn1.h
-dsa_vrf.o: ../../include/openssl/asn1_mac.h ../../include/openssl/bio.h
-dsa_vrf.o: ../../include/openssl/bn.h ../../include/openssl/buffer.h
-dsa_vrf.o: ../../include/openssl/crypto.h ../../include/openssl/dsa.h
-dsa_vrf.o: ../../include/openssl/e_os2.h ../../include/openssl/err.h
-dsa_vrf.o: ../../include/openssl/lhash.h ../../include/openssl/opensslconf.h
-dsa_vrf.o: ../../include/openssl/opensslv.h ../../include/openssl/ossl_typ.h
-dsa_vrf.o: ../../include/openssl/rand.h ../../include/openssl/safestack.h
-dsa_vrf.o: ../../include/openssl/stack.h ../../include/openssl/symhacks.h
-dsa_vrf.o: ../cryptlib.h dsa_vrf.c
diff --git a/crypto/openssl/crypto/dsa/README b/crypto/openssl/crypto/dsa/README
deleted file mode 100644
index 6a7e9c170add..000000000000
--- a/crypto/openssl/crypto/dsa/README
+++ /dev/null
@@ -1,4 +0,0 @@
-The stuff in here is based on patches supplied to me by
-Steven Schoch <schoch@sheba.arc.nasa.gov> to do DSS.
-I have since modified a them a little but a debt of gratitude
-is due for doing the initial work.
diff --git a/crypto/openssl/crypto/dsa/dsa.h b/crypto/openssl/crypto/dsa/dsa.h
deleted file mode 100644
index 3a8fe5b56bbd..000000000000
--- a/crypto/openssl/crypto/dsa/dsa.h
+++ /dev/null
@@ -1,285 +0,0 @@
-/* crypto/dsa/dsa.h */
-/* Copyright (C) 1995-1998 Eric Young (eay@cryptsoft.com)
- * All rights reserved.
- *
- * This package is an SSL implementation written
- * by Eric Young (eay@cryptsoft.com).
- * The implementation was written so as to conform with Netscapes SSL.
- * 
- * This library is free for commercial and non-commercial use as long as
- * the following conditions are aheared to.  The following conditions
- * apply to all code found in this distribution, be it the RC4, RSA,
- * lhash, DES, etc., code; not just the SSL code.  The SSL documentation
- * included with this distribution is covered by the same copyright terms
- * except that the holder is Tim Hudson (tjh@cryptsoft.com).
- * 
- * Copyright remains Eric Young's, and as such any Copyright notices in
- * the code are not to be removed.
- * If this package is used in a product, Eric Young should be given attribution
- * as the author of the parts of the library used.
- * This can be in the form of a textual message at program startup or
- * in documentation (online or textual) provided with the package.
- * 
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions
- * are met:
- * 1. Redistributions of source code must retain the copyright
- *    notice, this list of conditions and the following disclaimer.
- * 2. Redistributions in binary form must reproduce the above copyright
- *    notice, this list of conditions and the following disclaimer in the
- *    documentation and/or other materials provided with the distribution.
- * 3. All advertising materials mentioning features or use of this software
- *    must display the following acknowledgement:
- *    "This product includes cryptographic software written by
- *     Eric Young (eay@cryptsoft.com)"
- *    The word 'cryptographic' can be left out if the rouines from the library
- *    being used are not cryptographic related :-).
- * 4. If you include any Windows specific code (or a derivative thereof) from 
- *    the apps directory (application code) you must include an acknowledgement:
- *    "This product includes software written by Tim Hudson (tjh@cryptsoft.com)"
- * 
- * THIS SOFTWARE IS PROVIDED BY ERIC YOUNG ``AS IS'' AND
- * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
- * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
- * ARE DISCLAIMED.  IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE
- * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
- * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
- * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
- * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
- * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
- * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
- * SUCH DAMAGE.
- * 
- * The licence and distribution terms for any publically available version or
- * derivative of this code cannot be changed.  i.e. this code cannot simply be
- * copied and put under another distribution licence
- * [including the GNU Public Licence.]
- */
-
-/*
- * The DSS routines are based on patches supplied by
- * Steven Schoch <schoch@sheba.arc.nasa.gov>.  He basically did the
- * work and I have just tweaked them a little to fit into my
- * stylistic vision for SSLeay :-) */
-
-#ifndef HEADER_DSA_H
-#define HEADER_DSA_H
-
-#include <openssl/e_os2.h>
-
-#ifdef OPENSSL_NO_DSA
-#error DSA is disabled.
-#endif
-
-#ifndef OPENSSL_NO_BIO
-#include <openssl/bio.h>
-#endif
-#include <openssl/crypto.h>
-#include <openssl/ossl_typ.h>
-
-#ifndef OPENSSL_NO_DEPRECATED
-#include <openssl/bn.h>
-#ifndef OPENSSL_NO_DH
-# include <openssl/dh.h>
-#endif
-#endif
-
-#ifndef OPENSSL_DSA_MAX_MODULUS_BITS
-# define OPENSSL_DSA_MAX_MODULUS_BITS	10000
-#endif
-
-#define DSA_FLAG_CACHE_MONT_P	0x01
-#define DSA_FLAG_NO_EXP_CONSTTIME       0x02 /* new with 0.9.7h; the built-in DSA
-                                              * implementation now uses constant time
-                                              * modular exponentiation for secret exponents
-                                              * by default. This flag causes the
-                                              * faster variable sliding window method to
-                                              * be used for all exponents.
-                                              */
-
-#ifdef  __cplusplus
-extern "C" {
-#endif
-
-/* Already defined in ossl_typ.h */
-/* typedef struct dsa_st DSA; */
-/* typedef struct dsa_method DSA_METHOD; */
-
-typedef struct DSA_SIG_st
-	{
-	BIGNUM *r;
-	BIGNUM *s;
-	} DSA_SIG;
-
-struct dsa_method
-	{
-	const char *name;
-	DSA_SIG * (*dsa_do_sign)(const unsigned char *dgst, int dlen, DSA *dsa);
-	int (*dsa_sign_setup)(DSA *dsa, BN_CTX *ctx_in, BIGNUM **kinvp,
-								BIGNUM **rp);
-	int (*dsa_do_verify)(const unsigned char *dgst, int dgst_len,
-							DSA_SIG *sig, DSA *dsa);
-	int (*dsa_mod_exp)(DSA *dsa, BIGNUM *rr, BIGNUM *a1, BIGNUM *p1,
-			BIGNUM *a2, BIGNUM *p2, BIGNUM *m, BN_CTX *ctx,
-			BN_MONT_CTX *in_mont);
-	int (*bn_mod_exp)(DSA *dsa, BIGNUM *r, BIGNUM *a, const BIGNUM *p,
-				const BIGNUM *m, BN_CTX *ctx,
-				BN_MONT_CTX *m_ctx); /* Can be null */
-	int (*init)(DSA *dsa);
-	int (*finish)(DSA *dsa);
-	int flags;
-	char *app_data;
-	/* If this is non-NULL, it is used to generate DSA parameters */
-	int (*dsa_paramgen)(DSA *dsa, int bits,
-			unsigned char *seed, int seed_len,
-			int *counter_ret, unsigned long *h_ret,
-			BN_GENCB *cb);
-	/* If this is non-NULL, it is used to generate DSA keys */
-	int (*dsa_keygen)(DSA *dsa);
-	};
-
-struct dsa_st
-	{
-	/* This first variable is used to pick up errors where
-	 * a DSA is passed instead of of a EVP_PKEY */
-	int pad;
-	long version;
-	int write_params;
-	BIGNUM *p;
-	BIGNUM *q;	/* == 20 */
-	BIGNUM *g;
-
-	BIGNUM *pub_key;  /* y public key */
-	BIGNUM *priv_key; /* x private key */
-
-	BIGNUM *kinv;	/* Signing pre-calc */
-	BIGNUM *r;	/* Signing pre-calc */
-
-	int flags;
-	/* Normally used to cache montgomery values */
-	BN_MONT_CTX *method_mont_p;
-	int references;
-	CRYPTO_EX_DATA ex_data;
-	const DSA_METHOD *meth;
-	/* functional reference if 'meth' is ENGINE-provided */
-	ENGINE *engine;
-	};
-
-#define DSAparams_dup(x) ASN1_dup_of_const(DSA,i2d_DSAparams,d2i_DSAparams,x)
-#define d2i_DSAparams_fp(fp,x) (DSA *)ASN1_d2i_fp((char *(*)())DSA_new, \
-		(char *(*)())d2i_DSAparams,(fp),(unsigned char **)(x))
-#define i2d_DSAparams_fp(fp,x) ASN1_i2d_fp(i2d_DSAparams,(fp), \
-		(unsigned char *)(x))
-#define d2i_DSAparams_bio(bp,x) ASN1_d2i_bio_of(DSA,DSA_new,d2i_DSAparams,bp,x)
-#define i2d_DSAparams_bio(bp,x) ASN1_i2d_bio_of_const(DSA,i2d_DSAparams,bp,x)
-
-
-DSA_SIG * DSA_SIG_new(void);
-void	DSA_SIG_free(DSA_SIG *a);
-int	i2d_DSA_SIG(const DSA_SIG *a, unsigned char **pp);
-DSA_SIG * d2i_DSA_SIG(DSA_SIG **v, const unsigned char **pp, long length);
-
-DSA_SIG * DSA_do_sign(const unsigned char *dgst,int dlen,DSA *dsa);
-int	DSA_do_verify(const unsigned char *dgst,int dgst_len,
-		      DSA_SIG *sig,DSA *dsa);
-
-const DSA_METHOD *DSA_OpenSSL(void);
-
-void	DSA_set_default_method(const DSA_METHOD *);
-const DSA_METHOD *DSA_get_default_method(void);
-int	DSA_set_method(DSA *dsa, const DSA_METHOD *);
-
-DSA *	DSA_new(void);
-DSA *	DSA_new_method(ENGINE *engine);
-void	DSA_free (DSA *r);
-/* "up" the DSA object's reference count */
-int	DSA_up_ref(DSA *r);
-int	DSA_size(const DSA *);
-	/* next 4 return -1 on error */
-int	DSA_sign_setup( DSA *dsa,BN_CTX *ctx_in,BIGNUM **kinvp,BIGNUM **rp);
-int	DSA_sign(int type,const unsigned char *dgst,int dlen,
-		unsigned char *sig, unsigned int *siglen, DSA *dsa);
-int	DSA_verify(int type,const unsigned char *dgst,int dgst_len,
-		const unsigned char *sigbuf, int siglen, DSA *dsa);
-int DSA_get_ex_new_index(long argl, void *argp, CRYPTO_EX_new *new_func,
-	     CRYPTO_EX_dup *dup_func, CRYPTO_EX_free *free_func);
-int DSA_set_ex_data(DSA *d, int idx, void *arg);
-void *DSA_get_ex_data(DSA *d, int idx);
-
-DSA *	d2i_DSAPublicKey(DSA **a, const unsigned char **pp, long length);
-DSA *	d2i_DSAPrivateKey(DSA **a, const unsigned char **pp, long length);
-DSA * 	d2i_DSAparams(DSA **a, const unsigned char **pp, long length);
-
-/* Deprecated version */
-#ifndef OPENSSL_NO_DEPRECATED
-DSA *	DSA_generate_parameters(int bits,
-		unsigned char *seed,int seed_len,
-		int *counter_ret, unsigned long *h_ret,void
-		(*callback)(int, int, void *),void *cb_arg);
-#endif /* !defined(OPENSSL_NO_DEPRECATED) */
-
-/* New version */
-int	DSA_generate_parameters_ex(DSA *dsa, int bits,
-		unsigned char *seed,int seed_len,
-		int *counter_ret, unsigned long *h_ret, BN_GENCB *cb);
-
-int	DSA_generate_key(DSA *a);
-int	i2d_DSAPublicKey(const DSA *a, unsigned char **pp);
-int 	i2d_DSAPrivateKey(const DSA *a, unsigned char **pp);
-int	i2d_DSAparams(const DSA *a,unsigned char **pp);
-
-#ifndef OPENSSL_NO_BIO
-int	DSAparams_print(BIO *bp, const DSA *x);
-int	DSA_print(BIO *bp, const DSA *x, int off);
-#endif
-#ifndef OPENSSL_NO_FP_API
-int	DSAparams_print_fp(FILE *fp, const DSA *x);
-int	DSA_print_fp(FILE *bp, const DSA *x, int off);
-#endif
-
-#define DSS_prime_checks 50
-/* Primality test according to FIPS PUB 186[-1], Appendix 2.1:
- * 50 rounds of Rabin-Miller */
-#define DSA_is_prime(n, callback, cb_arg) \
-	BN_is_prime(n, DSS_prime_checks, callback, NULL, cb_arg)
-
-#ifndef OPENSSL_NO_DH
-/* Convert DSA structure (key or just parameters) into DH structure
- * (be careful to avoid small subgroup attacks when using this!) */
-DH *DSA_dup_DH(const DSA *r);
-#endif
-
-/* BEGIN ERROR CODES */
-/* The following lines are auto generated by the script mkerr.pl. Any changes
- * made after this point may be overwritten when the script is next run.
- */
-void ERR_load_DSA_strings(void);
-
-/* Error codes for the DSA functions. */
-
-/* Function codes. */
-#define DSA_F_D2I_DSA_SIG				 110
-#define DSA_F_DSAPARAMS_PRINT				 100
-#define DSA_F_DSAPARAMS_PRINT_FP			 101
-#define DSA_F_DSA_DO_SIGN				 112
-#define DSA_F_DSA_DO_VERIFY				 113
-#define DSA_F_DSA_NEW_METHOD				 103
-#define DSA_F_DSA_PRINT					 104
-#define DSA_F_DSA_PRINT_FP				 105
-#define DSA_F_DSA_SIGN					 106
-#define DSA_F_DSA_SIGN_SETUP				 107
-#define DSA_F_DSA_SIG_NEW				 109
-#define DSA_F_DSA_VERIFY				 108
-#define DSA_F_I2D_DSA_SIG				 111
-#define DSA_F_SIG_CB					 114
-
-/* Reason codes. */
-#define DSA_R_BAD_Q_VALUE				 102
-#define DSA_R_DATA_TOO_LARGE_FOR_KEY_SIZE		 100
-#define DSA_R_MISSING_PARAMETERS			 101
-#define DSA_R_MODULUS_TOO_LARGE				 103
-
-#ifdef  __cplusplus
-}
-#endif
-#endif
diff --git a/crypto/openssl/crypto/dsa/dsa_asn1.c b/crypto/openssl/crypto/dsa/dsa_asn1.c
deleted file mode 100644
index 23fce555aa40..000000000000
--- a/crypto/openssl/crypto/dsa/dsa_asn1.c
+++ /dev/null
@@ -1,140 +0,0 @@
-/* dsa_asn1.c */
-/* Written by Dr Stephen N Henson (shenson@bigfoot.com) for the OpenSSL
- * project 2000.
- */
-/* ====================================================================
- * Copyright (c) 2000 The OpenSSL Project.  All rights reserved.
- *
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions
- * are met:
- *
- * 1. Redistributions of source code must retain the above copyright
- *    notice, this list of conditions and the following disclaimer. 
- *
- * 2. Redistributions in binary form must reproduce the above copyright
- *    notice, this list of conditions and the following disclaimer in
- *    the documentation and/or other materials provided with the
- *    distribution.
- *
- * 3. All advertising materials mentioning features or use of this
- *    software must display the following acknowledgment:
- *    "This product includes software developed by the OpenSSL Project
- *    for use in the OpenSSL Toolkit. (http://www.OpenSSL.org/)"
- *
- * 4. The names "OpenSSL Toolkit" and "OpenSSL Project" must not be used to
- *    endorse or promote products derived from this software without
- *    prior written permission. For written permission, please contact
- *    licensing@OpenSSL.org.
- *
- * 5. Products derived from this software may not be called "OpenSSL"
- *    nor may "OpenSSL" appear in their names without prior written
- *    permission of the OpenSSL Project.
- *
- * 6. Redistributions of any form whatsoever must retain the following
- *    acknowledgment:
- *    "This product includes software developed by the OpenSSL Project
- *    for use in the OpenSSL Toolkit (http://www.OpenSSL.org/)"
- *
- * THIS SOFTWARE IS PROVIDED BY THE OpenSSL PROJECT ``AS IS'' AND ANY
- * EXPRESSED OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
- * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR
- * PURPOSE ARE DISCLAIMED.  IN NO EVENT SHALL THE OpenSSL PROJECT OR
- * ITS CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
- * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
- * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
- * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
- * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
- * STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
- * ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED
- * OF THE POSSIBILITY OF SUCH DAMAGE.
- * ====================================================================
- *
- * This product includes cryptographic software written by Eric Young
- * (eay@cryptsoft.com).  This product includes software written by Tim
- * Hudson (tjh@cryptsoft.com).
- *
- */
-
-#include <stdio.h>
-#include "cryptlib.h"
-#include <openssl/dsa.h>
-#include <openssl/asn1.h>
-#include <openssl/asn1t.h>
-
-/* Override the default new methods */
-static int sig_cb(int operation, ASN1_VALUE **pval, const ASN1_ITEM *it)
-{
-	if(operation == ASN1_OP_NEW_PRE) {
-		DSA_SIG *sig;
-		sig = OPENSSL_malloc(sizeof(DSA_SIG));
-		sig->r = NULL;
-		sig->s = NULL;
-		*pval = (ASN1_VALUE *)sig;
-		if(sig) return 2;
-		DSAerr(DSA_F_SIG_CB, ERR_R_MALLOC_FAILURE);
-		return 0;
-	}
-	return 1;
-}
-
-ASN1_SEQUENCE_cb(DSA_SIG, sig_cb) = {
-	ASN1_SIMPLE(DSA_SIG, r, CBIGNUM),
-	ASN1_SIMPLE(DSA_SIG, s, CBIGNUM)
-} ASN1_SEQUENCE_END_cb(DSA_SIG, DSA_SIG)
-
-IMPLEMENT_ASN1_FUNCTIONS_const(DSA_SIG)
-
-/* Override the default free and new methods */
-static int dsa_cb(int operation, ASN1_VALUE **pval, const ASN1_ITEM *it)
-{
-	if(operation == ASN1_OP_NEW_PRE) {
-		*pval = (ASN1_VALUE *)DSA_new();
-		if(*pval) return 2;
-		return 0;
-	} else if(operation == ASN1_OP_FREE_PRE) {
-		DSA_free((DSA *)*pval);
-		*pval = NULL;
-		return 2;
-	}
-	return 1;
-}
-
-ASN1_SEQUENCE_cb(DSAPrivateKey, dsa_cb) = {
-	ASN1_SIMPLE(DSA, version, LONG),
-	ASN1_SIMPLE(DSA, p, BIGNUM),
-	ASN1_SIMPLE(DSA, q, BIGNUM),
-	ASN1_SIMPLE(DSA, g, BIGNUM),
-	ASN1_SIMPLE(DSA, pub_key, BIGNUM),
-	ASN1_SIMPLE(DSA, priv_key, BIGNUM)
-} ASN1_SEQUENCE_END_cb(DSA, DSAPrivateKey)
-
-IMPLEMENT_ASN1_ENCODE_FUNCTIONS_const_fname(DSA, DSAPrivateKey, DSAPrivateKey)
-
-ASN1_SEQUENCE_cb(DSAparams, dsa_cb) = {
-	ASN1_SIMPLE(DSA, p, BIGNUM),
-	ASN1_SIMPLE(DSA, q, BIGNUM),
-	ASN1_SIMPLE(DSA, g, BIGNUM),
-} ASN1_SEQUENCE_END_cb(DSA, DSAparams)
-
-IMPLEMENT_ASN1_ENCODE_FUNCTIONS_const_fname(DSA, DSAparams, DSAparams)
-
-/* DSA public key is a bit trickier... its effectively a CHOICE type
- * decided by a field called write_params which can either write out
- * just the public key as an INTEGER or the parameters and public key
- * in a SEQUENCE
- */
-
-ASN1_SEQUENCE(dsa_pub_internal) = {
-	ASN1_SIMPLE(DSA, pub_key, BIGNUM),
-	ASN1_SIMPLE(DSA, p, BIGNUM),
-	ASN1_SIMPLE(DSA, q, BIGNUM),
-	ASN1_SIMPLE(DSA, g, BIGNUM)
-} ASN1_SEQUENCE_END_name(DSA, dsa_pub_internal)
-
-ASN1_CHOICE_cb(DSAPublicKey, dsa_cb) = {
-	ASN1_SIMPLE(DSA, pub_key, BIGNUM),
-	ASN1_EX_COMBINE(0, 0, dsa_pub_internal)
-} ASN1_CHOICE_END_cb(DSA, DSAPublicKey, write_params)
-
-IMPLEMENT_ASN1_ENCODE_FUNCTIONS_const_fname(DSA, DSAPublicKey, DSAPublicKey)
diff --git a/crypto/openssl/crypto/dsa/dsa_depr.c b/crypto/openssl/crypto/dsa/dsa_depr.c
deleted file mode 100644
index f2da680eb466..000000000000
--- a/crypto/openssl/crypto/dsa/dsa_depr.c
+++ /dev/null
@@ -1,106 +0,0 @@
-/* crypto/dsa/dsa_depr.c */
-/* ====================================================================
- * Copyright (c) 1998-2002 The OpenSSL Project.  All rights reserved.
- *
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions
- * are met:
- *
- * 1. Redistributions of source code must retain the above copyright
- *    notice, this list of conditions and the following disclaimer. 
- *
- * 2. Redistributions in binary form must reproduce the above copyright
- *    notice, this list of conditions and the following disclaimer in
- *    the documentation and/or other materials provided with the
- *    distribution.
- *
- * 3. All advertising materials mentioning features or use of this
- *    software must display the following acknowledgment:
- *    "This product includes software developed by the OpenSSL Project
- *    for use in the OpenSSL Toolkit. (http://www.openssl.org/)"
- *
- * 4. The names "OpenSSL Toolkit" and "OpenSSL Project" must not be used to
- *    endorse or promote products derived from this software without
- *    prior written permission. For written permission, please contact
- *    openssl-core@openssl.org.
- *
- * 5. Products derived from this software may not be called "OpenSSL"
- *    nor may "OpenSSL" appear in their names without prior written
- *    permission of the OpenSSL Project.
- *
- * 6. Redistributions of any form whatsoever must retain the following
- *    acknowledgment:
- *    "This product includes software developed by the OpenSSL Project
- *    for use in the OpenSSL Toolkit (http://www.openssl.org/)"
- *
- * THIS SOFTWARE IS PROVIDED BY THE OpenSSL PROJECT ``AS IS'' AND ANY
- * EXPRESSED OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
- * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR
- * PURPOSE ARE DISCLAIMED.  IN NO EVENT SHALL THE OpenSSL PROJECT OR
- * ITS CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
- * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
- * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
- * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
- * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
- * STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
- * ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED
- * OF THE POSSIBILITY OF SUCH DAMAGE.
- * ====================================================================
- *
- * This product includes cryptographic software written by Eric Young
- * (eay@cryptsoft.com).  This product includes software written by Tim
- * Hudson (tjh@cryptsoft.com).
- *
- */
-
-/* This file contains deprecated function(s) that are now wrappers to the new
- * version(s). */
-
-#undef GENUINE_DSA
-
-#ifdef GENUINE_DSA
-/* Parameter generation follows the original release of FIPS PUB 186,
- * Appendix 2.2 (i.e. use SHA as defined in FIPS PUB 180) */
-#define HASH    EVP_sha()
-#else
-/* Parameter generation follows the updated Appendix 2.2 for FIPS PUB 186,
- * also Appendix 2.2 of FIPS PUB 186-1 (i.e. use SHA as defined in
- * FIPS PUB 180-1) */
-#define HASH    EVP_sha1()
-#endif 
-
-static void *dummy=&dummy;
-
-#ifndef OPENSSL_NO_SHA
-
-#include <stdio.h>
-#include <time.h>
-#include "cryptlib.h"
-#include <openssl/evp.h>
-#include <openssl/bn.h>
-#include <openssl/dsa.h>
-#include <openssl/rand.h>
-#include <openssl/sha.h>
-
-#ifndef OPENSSL_NO_DEPRECATED
-DSA *DSA_generate_parameters(int bits,
-		unsigned char *seed_in, int seed_len,
-		int *counter_ret, unsigned long *h_ret,
-		void (*callback)(int, int, void *),
-		void *cb_arg)
-	{
-	BN_GENCB cb;
-	DSA *ret;
-
-	if ((ret=DSA_new()) == NULL) return NULL;
-
-	BN_GENCB_set_old(&cb, callback, cb_arg);
-
-	if(DSA_generate_parameters_ex(ret, bits, seed_in, seed_len,
-				counter_ret, h_ret, &cb))
-		return ret;
-	DSA_free(ret);
-	return NULL;
-	}
-#endif
-#endif
diff --git a/crypto/openssl/crypto/dsa/dsa_err.c b/crypto/openssl/crypto/dsa/dsa_err.c
deleted file mode 100644
index 768711994b9c..000000000000
--- a/crypto/openssl/crypto/dsa/dsa_err.c
+++ /dev/null
@@ -1,111 +0,0 @@
-/* crypto/dsa/dsa_err.c */
-/* ====================================================================
- * Copyright (c) 1999-2005 The OpenSSL Project.  All rights reserved.
- *
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions
- * are met:
- *
- * 1. Redistributions of source code must retain the above copyright
- *    notice, this list of conditions and the following disclaimer. 
- *
- * 2. Redistributions in binary form must reproduce the above copyright
- *    notice, this list of conditions and the following disclaimer in
- *    the documentation and/or other materials provided with the
- *    distribution.
- *
- * 3. All advertising materials mentioning features or use of this
- *    software must display the following acknowledgment:
- *    "This product includes software developed by the OpenSSL Project
- *    for use in the OpenSSL Toolkit. (http://www.OpenSSL.org/)"
- *
- * 4. The names "OpenSSL Toolkit" and "OpenSSL Project" must not be used to
- *    endorse or promote products derived from this software without
- *    prior written permission. For written permission, please contact
- *    openssl-core@OpenSSL.org.
- *
- * 5. Products derived from this software may not be called "OpenSSL"
- *    nor may "OpenSSL" appear in their names without prior written
- *    permission of the OpenSSL Project.
- *
- * 6. Redistributions of any form whatsoever must retain the following
- *    acknowledgment:
- *    "This product includes software developed by the OpenSSL Project
- *    for use in the OpenSSL Toolkit (http://www.OpenSSL.org/)"
- *
- * THIS SOFTWARE IS PROVIDED BY THE OpenSSL PROJECT ``AS IS'' AND ANY
- * EXPRESSED OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
- * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR
- * PURPOSE ARE DISCLAIMED.  IN NO EVENT SHALL THE OpenSSL PROJECT OR
- * ITS CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
- * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
- * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
- * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
- * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
- * STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
- * ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED
- * OF THE POSSIBILITY OF SUCH DAMAGE.
- * ====================================================================
- *
- * This product includes cryptographic software written by Eric Young
- * (eay@cryptsoft.com).  This product includes software written by Tim
- * Hudson (tjh@cryptsoft.com).
- *
- */
-
-/* NOTE: this file was auto generated by the mkerr.pl script: any changes
- * made to it will be overwritten when the script next updates this file,
- * only reason strings will be preserved.
- */
-
-#include <stdio.h>
-#include <openssl/err.h>
-#include <openssl/dsa.h>
-
-/* BEGIN ERROR CODES */
-#ifndef OPENSSL_NO_ERR
-
-#define ERR_FUNC(func) ERR_PACK(ERR_LIB_DSA,func,0)
-#define ERR_REASON(reason) ERR_PACK(ERR_LIB_DSA,0,reason)
-
-static ERR_STRING_DATA DSA_str_functs[]=
-	{
-{ERR_FUNC(DSA_F_D2I_DSA_SIG),	"d2i_DSA_SIG"},
-{ERR_FUNC(DSA_F_DSAPARAMS_PRINT),	"DSAparams_print"},
-{ERR_FUNC(DSA_F_DSAPARAMS_PRINT_FP),	"DSAparams_print_fp"},
-{ERR_FUNC(DSA_F_DSA_DO_SIGN),	"DSA_do_sign"},
-{ERR_FUNC(DSA_F_DSA_DO_VERIFY),	"DSA_do_verify"},
-{ERR_FUNC(DSA_F_DSA_NEW_METHOD),	"DSA_new_method"},
-{ERR_FUNC(DSA_F_DSA_PRINT),	"DSA_print"},
-{ERR_FUNC(DSA_F_DSA_PRINT_FP),	"DSA_print_fp"},
-{ERR_FUNC(DSA_F_DSA_SIGN),	"DSA_sign"},
-{ERR_FUNC(DSA_F_DSA_SIGN_SETUP),	"DSA_sign_setup"},
-{ERR_FUNC(DSA_F_DSA_SIG_NEW),	"DSA_SIG_new"},
-{ERR_FUNC(DSA_F_DSA_VERIFY),	"DSA_verify"},
-{ERR_FUNC(DSA_F_I2D_DSA_SIG),	"i2d_DSA_SIG"},
-{ERR_FUNC(DSA_F_SIG_CB),	"SIG_CB"},
-{0,NULL}
-	};
-
-static ERR_STRING_DATA DSA_str_reasons[]=
-	{
-{ERR_REASON(DSA_R_BAD_Q_VALUE)           ,"bad q value"},
-{ERR_REASON(DSA_R_DATA_TOO_LARGE_FOR_KEY_SIZE),"data too large for key size"},
-{ERR_REASON(DSA_R_MISSING_PARAMETERS)    ,"missing parameters"},
-{ERR_REASON(DSA_R_MODULUS_TOO_LARGE)     ,"modulus too large"},
-{0,NULL}
-	};
-
-#endif
-
-void ERR_load_DSA_strings(void)
-	{
-#ifndef OPENSSL_NO_ERR
-
-	if (ERR_func_error_string(DSA_str_functs[0].error) == NULL)
-		{
-		ERR_load_strings(0,DSA_str_functs);
-		ERR_load_strings(0,DSA_str_reasons);
-		}
-#endif
-	}
diff --git a/crypto/openssl/crypto/dsa/dsa_gen.c b/crypto/openssl/crypto/dsa/dsa_gen.c
deleted file mode 100644
index 6a6be3b57537..000000000000
--- a/crypto/openssl/crypto/dsa/dsa_gen.c
+++ /dev/null
@@ -1,315 +0,0 @@
-/* crypto/dsa/dsa_gen.c */
-/* Copyright (C) 1995-1998 Eric Young (eay@cryptsoft.com)
- * All rights reserved.
- *
- * This package is an SSL implementation written
- * by Eric Young (eay@cryptsoft.com).
- * The implementation was written so as to conform with Netscapes SSL.
- * 
- * This library is free for commercial and non-commercial use as long as
- * the following conditions are aheared to.  The following conditions
- * apply to all code found in this distribution, be it the RC4, RSA,
- * lhash, DES, etc., code; not just the SSL code.  The SSL documentation
- * included with this distribution is covered by the same copyright terms
- * except that the holder is Tim Hudson (tjh@cryptsoft.com).
- * 
- * Copyright remains Eric Young's, and as such any Copyright notices in
- * the code are not to be removed.
- * If this package is used in a product, Eric Young should be given attribution
- * as the author of the parts of the library used.
- * This can be in the form of a textual message at program startup or
- * in documentation (online or textual) provided with the package.
- * 
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions
- * are met:
- * 1. Redistributions of source code must retain the copyright
- *    notice, this list of conditions and the following disclaimer.
- * 2. Redistributions in binary form must reproduce the above copyright
- *    notice, this list of conditions and the following disclaimer in the
- *    documentation and/or other materials provided with the distribution.
- * 3. All advertising materials mentioning features or use of this software
- *    must display the following acknowledgement:
- *    "This product includes cryptographic software written by
- *     Eric Young (eay@cryptsoft.com)"
- *    The word 'cryptographic' can be left out if the rouines from the library
- *    being used are not cryptographic related :-).
- * 4. If you include any Windows specific code (or a derivative thereof) from 
- *    the apps directory (application code) you must include an acknowledgement:
- *    "This product includes software written by Tim Hudson (tjh@cryptsoft.com)"
- * 
- * THIS SOFTWARE IS PROVIDED BY ERIC YOUNG ``AS IS'' AND
- * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
- * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
- * ARE DISCLAIMED.  IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE
- * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
- * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
- * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
- * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
- * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
- * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
- * SUCH DAMAGE.
- * 
- * The licence and distribution terms for any publically available version or
- * derivative of this code cannot be changed.  i.e. this code cannot simply be
- * copied and put under another distribution licence
- * [including the GNU Public Licence.]
- */
-
-#undef GENUINE_DSA
-
-#ifdef GENUINE_DSA
-/* Parameter generation follows the original release of FIPS PUB 186,
- * Appendix 2.2 (i.e. use SHA as defined in FIPS PUB 180) */
-#define HASH    EVP_sha()
-#else
-/* Parameter generation follows the updated Appendix 2.2 for FIPS PUB 186,
- * also Appendix 2.2 of FIPS PUB 186-1 (i.e. use SHA as defined in
- * FIPS PUB 180-1) */
-#define HASH    EVP_sha1()
-#endif 
-
-#include <openssl/opensslconf.h> /* To see if OPENSSL_NO_SHA is defined */
-
-#ifndef OPENSSL_NO_SHA
-
-#include <stdio.h>
-#include <time.h>
-#include "cryptlib.h"
-#include <openssl/evp.h>
-#include <openssl/bn.h>
-#include <openssl/dsa.h>
-#include <openssl/rand.h>
-#include <openssl/sha.h>
-
-static int dsa_builtin_paramgen(DSA *ret, int bits,
-		unsigned char *seed_in, int seed_len,
-		int *counter_ret, unsigned long *h_ret, BN_GENCB *cb);
-
-int DSA_generate_parameters_ex(DSA *ret, int bits,
-		unsigned char *seed_in, int seed_len,
-		int *counter_ret, unsigned long *h_ret, BN_GENCB *cb)
-	{
-	if(ret->meth->dsa_paramgen)
-		return ret->meth->dsa_paramgen(ret, bits, seed_in, seed_len,
-				counter_ret, h_ret, cb);
-	return dsa_builtin_paramgen(ret, bits, seed_in, seed_len,
-			counter_ret, h_ret, cb);
-	}
-
-static int dsa_builtin_paramgen(DSA *ret, int bits,
-		unsigned char *seed_in, int seed_len,
-		int *counter_ret, unsigned long *h_ret, BN_GENCB *cb)
-	{
-	int ok=0;
-	unsigned char seed[SHA_DIGEST_LENGTH];
-	unsigned char md[SHA_DIGEST_LENGTH];
-	unsigned char buf[SHA_DIGEST_LENGTH],buf2[SHA_DIGEST_LENGTH];
-	BIGNUM *r0,*W,*X,*c,*test;
-	BIGNUM *g=NULL,*q=NULL,*p=NULL;
-	BN_MONT_CTX *mont=NULL;
-	int k,n=0,i,b,m=0;
-	int counter=0;
-	int r=0;
-	BN_CTX *ctx=NULL;
-	unsigned int h=2;
-
-	if (bits < 512) bits=512;
-	bits=(bits+63)/64*64;
-
-	if (seed_len < 20)
-		seed_in = NULL; /* seed buffer too small -- ignore */
-	if (seed_len > 20) 
-		seed_len = 20; /* App. 2.2 of FIPS PUB 186 allows larger SEED,
-		                * but our internal buffers are restricted to 160 bits*/
-	if ((seed_in != NULL) && (seed_len == 20))
-		memcpy(seed,seed_in,seed_len);
-
-	if ((ctx=BN_CTX_new()) == NULL) goto err;
-
-	if ((mont=BN_MONT_CTX_new()) == NULL) goto err;
-
-	BN_CTX_start(ctx);
-	r0 = BN_CTX_get(ctx);
-	g = BN_CTX_get(ctx);
-	W = BN_CTX_get(ctx);
-	q = BN_CTX_get(ctx);
-	X = BN_CTX_get(ctx);
-	c = BN_CTX_get(ctx);
-	p = BN_CTX_get(ctx);
-	test = BN_CTX_get(ctx);
-
-	if (!BN_lshift(test,BN_value_one(),bits-1))
-		goto err;
-
-	for (;;)
-		{
-		for (;;) /* find q */
-			{
-			int seed_is_random;
-
-			/* step 1 */
-			if(!BN_GENCB_call(cb, 0, m++))
-				goto err;
-
-			if (!seed_len)
-				{
-				RAND_pseudo_bytes(seed,SHA_DIGEST_LENGTH);
-				seed_is_random = 1;
-				}
-			else
-				{
-				seed_is_random = 0;
-				seed_len=0; /* use random seed if 'seed_in' turns out to be bad*/
-				}
-			memcpy(buf,seed,SHA_DIGEST_LENGTH);
-			memcpy(buf2,seed,SHA_DIGEST_LENGTH);
-			/* precompute "SEED + 1" for step 7: */
-			for (i=SHA_DIGEST_LENGTH-1; i >= 0; i--)
-				{
-				buf[i]++;
-				if (buf[i] != 0) break;
-				}
-
-			/* step 2 */
-			EVP_Digest(seed,SHA_DIGEST_LENGTH,md,NULL,HASH, NULL);
-			EVP_Digest(buf,SHA_DIGEST_LENGTH,buf2,NULL,HASH, NULL);
-			for (i=0; i<SHA_DIGEST_LENGTH; i++)
-				md[i]^=buf2[i];
-
-			/* step 3 */
-			md[0]|=0x80;
-			md[SHA_DIGEST_LENGTH-1]|=0x01;
-			if (!BN_bin2bn(md,SHA_DIGEST_LENGTH,q)) goto err;
-
-			/* step 4 */
-			r = BN_is_prime_fasttest_ex(q, DSS_prime_checks, ctx,
-					seed_is_random, cb);
-			if (r > 0)
-				break;
-			if (r != 0)
-				goto err;
-
-			/* do a callback call */
-			/* step 5 */
-			}
-
-		if(!BN_GENCB_call(cb, 2, 0)) goto err;
-		if(!BN_GENCB_call(cb, 3, 0)) goto err;
-
-		/* step 6 */
-		counter=0;
-		/* "offset = 2" */
-
-		n=(bits-1)/160;
-		b=(bits-1)-n*160;
-
-		for (;;)
-			{
-			if ((counter != 0) && !BN_GENCB_call(cb, 0, counter))
-				goto err;
-
-			/* step 7 */
-			BN_zero(W);
-			/* now 'buf' contains "SEED + offset - 1" */
-			for (k=0; k<=n; k++)
-				{
-				/* obtain "SEED + offset + k" by incrementing: */
-				for (i=SHA_DIGEST_LENGTH-1; i >= 0; i--)
-					{
-					buf[i]++;
-					if (buf[i] != 0) break;
-					}
-
-				EVP_Digest(buf,SHA_DIGEST_LENGTH,md,NULL,HASH, NULL);
-
-				/* step 8 */
-				if (!BN_bin2bn(md,SHA_DIGEST_LENGTH,r0))
-					goto err;
-				if (!BN_lshift(r0,r0,160*k)) goto err;
-				if (!BN_add(W,W,r0)) goto err;
-				}
-
-			/* more of step 8 */
-			if (!BN_mask_bits(W,bits-1)) goto err;
-			if (!BN_copy(X,W)) goto err;
-			if (!BN_add(X,X,test)) goto err;
-
-			/* step 9 */
-			if (!BN_lshift1(r0,q)) goto err;
-			if (!BN_mod(c,X,r0,ctx)) goto err;
-			if (!BN_sub(r0,c,BN_value_one())) goto err;
-			if (!BN_sub(p,X,r0)) goto err;
-
-			/* step 10 */
-			if (BN_cmp(p,test) >= 0)
-				{
-				/* step 11 */
-				r = BN_is_prime_fasttest_ex(p, DSS_prime_checks,
-						ctx, 1, cb);
-				if (r > 0)
-						goto end; /* found it */
-				if (r != 0)
-					goto err;
-				}
-
-			/* step 13 */
-			counter++;
-			/* "offset = offset + n + 1" */
-
-			/* step 14 */
-			if (counter >= 4096) break;
-			}
-		}
-end:
-	if(!BN_GENCB_call(cb, 2, 1))
-		goto err;
-
-	/* We now need to generate g */
-	/* Set r0=(p-1)/q */
-	if (!BN_sub(test,p,BN_value_one())) goto err;
-	if (!BN_div(r0,NULL,test,q,ctx)) goto err;
-
-	if (!BN_set_word(test,h)) goto err;
-	if (!BN_MONT_CTX_set(mont,p,ctx)) goto err;
-
-	for (;;)
-		{
-		/* g=test^r0%p */
-		if (!BN_mod_exp_mont(g,test,r0,p,ctx,mont)) goto err;
-		if (!BN_is_one(g)) break;
-		if (!BN_add(test,test,BN_value_one())) goto err;
-		h++;
-		}
-
-	if(!BN_GENCB_call(cb, 3, 1))
-		goto err;
-
-	ok=1;
-err:
-	if (ok)
-		{
-		if(ret->p) BN_free(ret->p);
-		if(ret->q) BN_free(ret->q);
-		if(ret->g) BN_free(ret->g);
-		ret->p=BN_dup(p);
-		ret->q=BN_dup(q);
-		ret->g=BN_dup(g);
-		if (ret->p == NULL || ret->q == NULL || ret->g == NULL)
-			{
-			ok=0;
-			goto err;
-			}
-		if ((m > 1) && (seed_in != NULL)) memcpy(seed_in,seed,20);
-		if (counter_ret != NULL) *counter_ret=counter;
-		if (h_ret != NULL) *h_ret=h;
-		}
-	if(ctx)
-		{
-		BN_CTX_end(ctx);
-		BN_CTX_free(ctx);
-		}
-	if (mont != NULL) BN_MONT_CTX_free(mont);
-	return ok;
-	}
-#endif
diff --git a/crypto/openssl/crypto/dsa/dsa_key.c b/crypto/openssl/crypto/dsa/dsa_key.c
deleted file mode 100644
index 0423f2e00cd2..000000000000
--- a/crypto/openssl/crypto/dsa/dsa_key.c
+++ /dev/null
@@ -1,128 +0,0 @@
-/* crypto/dsa/dsa_key.c */
-/* Copyright (C) 1995-1998 Eric Young (eay@cryptsoft.com)
- * All rights reserved.
- *
- * This package is an SSL implementation written
- * by Eric Young (eay@cryptsoft.com).
- * The implementation was written so as to conform with Netscapes SSL.
- * 
- * This library is free for commercial and non-commercial use as long as
- * the following conditions are aheared to.  The following conditions
- * apply to all code found in this distribution, be it the RC4, RSA,
- * lhash, DES, etc., code; not just the SSL code.  The SSL documentation
- * included with this distribution is covered by the same copyright terms
- * except that the holder is Tim Hudson (tjh@cryptsoft.com).
- * 
- * Copyright remains Eric Young's, and as such any Copyright notices in
- * the code are not to be removed.
- * If this package is used in a product, Eric Young should be given attribution
- * as the author of the parts of the library used.
- * This can be in the form of a textual message at program startup or
- * in documentation (online or textual) provided with the package.
- * 
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions
- * are met:
- * 1. Redistributions of source code must retain the copyright
- *    notice, this list of conditions and the following disclaimer.
- * 2. Redistributions in binary form must reproduce the above copyright
- *    notice, this list of conditions and the following disclaimer in the
- *    documentation and/or other materials provided with the distribution.
- * 3. All advertising materials mentioning features or use of this software
- *    must display the following acknowledgement:
- *    "This product includes cryptographic software written by
- *     Eric Young (eay@cryptsoft.com)"
- *    The word 'cryptographic' can be left out if the rouines from the library
- *    being used are not cryptographic related :-).
- * 4. If you include any Windows specific code (or a derivative thereof) from 
- *    the apps directory (application code) you must include an acknowledgement:
- *    "This product includes software written by Tim Hudson (tjh@cryptsoft.com)"
- * 
- * THIS SOFTWARE IS PROVIDED BY ERIC YOUNG ``AS IS'' AND
- * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
- * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
- * ARE DISCLAIMED.  IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE
- * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
- * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
- * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
- * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
- * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
- * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
- * SUCH DAMAGE.
- * 
- * The licence and distribution terms for any publically available version or
- * derivative of this code cannot be changed.  i.e. this code cannot simply be
- * copied and put under another distribution licence
- * [including the GNU Public Licence.]
- */
-
-#include <stdio.h>
-#include <time.h>
-#include "cryptlib.h"
-#ifndef OPENSSL_NO_SHA
-#include <openssl/bn.h>
-#include <openssl/dsa.h>
-#include <openssl/rand.h>
-
-static int dsa_builtin_keygen(DSA *dsa);
-
-int DSA_generate_key(DSA *dsa)
-	{
-	if(dsa->meth->dsa_keygen)
-		return dsa->meth->dsa_keygen(dsa);
-	return dsa_builtin_keygen(dsa);
-	}
-
-static int dsa_builtin_keygen(DSA *dsa)
-	{
-	int ok=0;
-	BN_CTX *ctx=NULL;
-	BIGNUM *pub_key=NULL,*priv_key=NULL;
-
-	if ((ctx=BN_CTX_new()) == NULL) goto err;
-
-	if (dsa->priv_key == NULL)
-		{
-		if ((priv_key=BN_new()) == NULL) goto err;
-		}
-	else
-		priv_key=dsa->priv_key;
-
-	do
-		if (!BN_rand_range(priv_key,dsa->q)) goto err;
-	while (BN_is_zero(priv_key));
-
-	if (dsa->pub_key == NULL)
-		{
-		if ((pub_key=BN_new()) == NULL) goto err;
-		}
-	else
-		pub_key=dsa->pub_key;
-	
-	{
-		BIGNUM local_prk;
-		BIGNUM *prk;
-
-		if ((dsa->flags & DSA_FLAG_NO_EXP_CONSTTIME) == 0)
-			{
-			BN_init(&local_prk);
-			prk = &local_prk;
-			BN_with_flags(prk, priv_key, BN_FLG_EXP_CONSTTIME);
-			}
-		else
-			prk = priv_key;
-
-		if (!BN_mod_exp(pub_key,dsa->g,prk,dsa->p,ctx)) goto err;
-	}
-
-	dsa->priv_key=priv_key;
-	dsa->pub_key=pub_key;
-	ok=1;
-
-err:
-	if ((pub_key != NULL) && (dsa->pub_key == NULL)) BN_free(pub_key);
-	if ((priv_key != NULL) && (dsa->priv_key == NULL)) BN_free(priv_key);
-	if (ctx != NULL) BN_CTX_free(ctx);
-	return(ok);
-	}
-#endif
diff --git a/crypto/openssl/crypto/dsa/dsa_lib.c b/crypto/openssl/crypto/dsa/dsa_lib.c
deleted file mode 100644
index e9b75902dbc2..000000000000
--- a/crypto/openssl/crypto/dsa/dsa_lib.c
+++ /dev/null
@@ -1,311 +0,0 @@
-/* crypto/dsa/dsa_lib.c */
-/* Copyright (C) 1995-1998 Eric Young (eay@cryptsoft.com)
- * All rights reserved.
- *
- * This package is an SSL implementation written
- * by Eric Young (eay@cryptsoft.com).
- * The implementation was written so as to conform with Netscapes SSL.
- * 
- * This library is free for commercial and non-commercial use as long as
- * the following conditions are aheared to.  The following conditions
- * apply to all code found in this distribution, be it the RC4, RSA,
- * lhash, DES, etc., code; not just the SSL code.  The SSL documentation
- * included with this distribution is covered by the same copyright terms
- * except that the holder is Tim Hudson (tjh@cryptsoft.com).
- * 
- * Copyright remains Eric Young's, and as such any Copyright notices in
- * the code are not to be removed.
- * If this package is used in a product, Eric Young should be given attribution
- * as the author of the parts of the library used.
- * This can be in the form of a textual message at program startup or
- * in documentation (online or textual) provided with the package.
- * 
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions
- * are met:
- * 1. Redistributions of source code must retain the copyright
- *    notice, this list of conditions and the following disclaimer.
- * 2. Redistributions in binary form must reproduce the above copyright
- *    notice, this list of conditions and the following disclaimer in the
- *    documentation and/or other materials provided with the distribution.
- * 3. All advertising materials mentioning features or use of this software
- *    must display the following acknowledgement:
- *    "This product includes cryptographic software written by
- *     Eric Young (eay@cryptsoft.com)"
- *    The word 'cryptographic' can be left out if the rouines from the library
- *    being used are not cryptographic related :-).
- * 4. If you include any Windows specific code (or a derivative thereof) from 
- *    the apps directory (application code) you must include an acknowledgement:
- *    "This product includes software written by Tim Hudson (tjh@cryptsoft.com)"
- * 
- * THIS SOFTWARE IS PROVIDED BY ERIC YOUNG ``AS IS'' AND
- * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
- * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
- * ARE DISCLAIMED.  IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE
- * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
- * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
- * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
- * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
- * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
- * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
- * SUCH DAMAGE.
- * 
- * The licence and distribution terms for any publically available version or
- * derivative of this code cannot be changed.  i.e. this code cannot simply be
- * copied and put under another distribution licence
- * [including the GNU Public Licence.]
- */
-
-/* Original version from Steven Schoch <schoch@sheba.arc.nasa.gov> */
-
-#include <stdio.h>
-#include "cryptlib.h"
-#include <openssl/bn.h>
-#include <openssl/dsa.h>
-#include <openssl/asn1.h>
-#ifndef OPENSSL_NO_ENGINE
-#include <openssl/engine.h>
-#endif
-#ifndef OPENSSL_NO_DH
-#include <openssl/dh.h>
-#endif
-
-const char DSA_version[]="DSA" OPENSSL_VERSION_PTEXT;
-
-static const DSA_METHOD *default_DSA_method = NULL;
-
-void DSA_set_default_method(const DSA_METHOD *meth)
-	{
-	default_DSA_method = meth;
-	}
-
-const DSA_METHOD *DSA_get_default_method(void)
-	{
-	if(!default_DSA_method)
-		default_DSA_method = DSA_OpenSSL();
-	return default_DSA_method;
-	}
-
-DSA *DSA_new(void)
-	{
-	return DSA_new_method(NULL);
-	}
-
-int DSA_set_method(DSA *dsa, const DSA_METHOD *meth)
-	{
-	/* NB: The caller is specifically setting a method, so it's not up to us
-	 * to deal with which ENGINE it comes from. */
-        const DSA_METHOD *mtmp;
-        mtmp = dsa->meth;
-        if (mtmp->finish) mtmp->finish(dsa);
-#ifndef OPENSSL_NO_ENGINE
-	if (dsa->engine)
-		{
-		ENGINE_finish(dsa->engine);
-		dsa->engine = NULL;
-		}
-#endif
-        dsa->meth = meth;
-        if (meth->init) meth->init(dsa);
-        return 1;
-	}
-
-DSA *DSA_new_method(ENGINE *engine)
-	{
-	DSA *ret;
-
-	ret=(DSA *)OPENSSL_malloc(sizeof(DSA));
-	if (ret == NULL)
-		{
-		DSAerr(DSA_F_DSA_NEW_METHOD,ERR_R_MALLOC_FAILURE);
-		return(NULL);
-		}
-	ret->meth = DSA_get_default_method();
-#ifndef OPENSSL_NO_ENGINE
-	if (engine)
-		{
-		if (!ENGINE_init(engine))
-			{
-			DSAerr(DSA_F_DSA_NEW_METHOD, ERR_R_ENGINE_LIB);
-			OPENSSL_free(ret);
-			return NULL;
-			}
-		ret->engine = engine;
-		}
-	else
-		ret->engine = ENGINE_get_default_DSA();
-	if(ret->engine)
-		{
-		ret->meth = ENGINE_get_DSA(ret->engine);
-		if(!ret->meth)
-			{
-			DSAerr(DSA_F_DSA_NEW_METHOD,
-				ERR_R_ENGINE_LIB);
-			ENGINE_finish(ret->engine);
-			OPENSSL_free(ret);
-			return NULL;
-			}
-		}
-#endif
-
-	ret->pad=0;
-	ret->version=0;
-	ret->write_params=1;
-	ret->p=NULL;
-	ret->q=NULL;
-	ret->g=NULL;
-
-	ret->pub_key=NULL;
-	ret->priv_key=NULL;
-
-	ret->kinv=NULL;
-	ret->r=NULL;
-	ret->method_mont_p=NULL;
-
-	ret->references=1;
-	ret->flags=ret->meth->flags;
-	CRYPTO_new_ex_data(CRYPTO_EX_INDEX_DSA, ret, &ret->ex_data);
-	if ((ret->meth->init != NULL) && !ret->meth->init(ret))
-		{
-#ifndef OPENSSL_NO_ENGINE
-		if (ret->engine)
-			ENGINE_finish(ret->engine);
-#endif
-		CRYPTO_free_ex_data(CRYPTO_EX_INDEX_DSA, ret, &ret->ex_data);
-		OPENSSL_free(ret);
-		ret=NULL;
-		}
-	
-	return(ret);
-	}
-
-void DSA_free(DSA *r)
-	{
-	int i;
-
-	if (r == NULL) return;
-
-	i=CRYPTO_add(&r->references,-1,CRYPTO_LOCK_DSA);
-#ifdef REF_PRINT
-	REF_PRINT("DSA",r);
-#endif
-	if (i > 0) return;
-#ifdef REF_CHECK
-	if (i < 0)
-		{
-		fprintf(stderr,"DSA_free, bad reference count\n");
-		abort();
-		}
-#endif
-
-	if(r->meth->finish)
-		r->meth->finish(r);
-#ifndef OPENSSL_NO_ENGINE
-	if(r->engine)
-		ENGINE_finish(r->engine);
-#endif
-
-	CRYPTO_free_ex_data(CRYPTO_EX_INDEX_DSA, r, &r->ex_data);
-
-	if (r->p != NULL) BN_clear_free(r->p);
-	if (r->q != NULL) BN_clear_free(r->q);
-	if (r->g != NULL) BN_clear_free(r->g);
-	if (r->pub_key != NULL) BN_clear_free(r->pub_key);
-	if (r->priv_key != NULL) BN_clear_free(r->priv_key);
-	if (r->kinv != NULL) BN_clear_free(r->kinv);
-	if (r->r != NULL) BN_clear_free(r->r);
-	OPENSSL_free(r);
-	}
-
-int DSA_up_ref(DSA *r)
-	{
-	int i = CRYPTO_add(&r->references, 1, CRYPTO_LOCK_DSA);
-#ifdef REF_PRINT
-	REF_PRINT("DSA",r);
-#endif
-#ifdef REF_CHECK
-	if (i < 2)
-		{
-		fprintf(stderr, "DSA_up_ref, bad reference count\n");
-		abort();
-		}
-#endif
-	return ((i > 1) ? 1 : 0);
-	}
-
-int DSA_size(const DSA *r)
-	{
-	int ret,i;
-	ASN1_INTEGER bs;
-	unsigned char buf[4];	/* 4 bytes looks really small.
-				   However, i2d_ASN1_INTEGER() will not look
-				   beyond the first byte, as long as the second
-				   parameter is NULL. */
-
-	i=BN_num_bits(r->q);
-	bs.length=(i+7)/8;
-	bs.data=buf;
-	bs.type=V_ASN1_INTEGER;
-	/* If the top bit is set the asn1 encoding is 1 larger. */
-	buf[0]=0xff;	
-
-	i=i2d_ASN1_INTEGER(&bs,NULL);
-	i+=i; /* r and s */
-	ret=ASN1_object_size(1,i,V_ASN1_SEQUENCE);
-	return(ret);
-	}
-
-int DSA_get_ex_new_index(long argl, void *argp, CRYPTO_EX_new *new_func,
-	     CRYPTO_EX_dup *dup_func, CRYPTO_EX_free *free_func)
-        {
-	return CRYPTO_get_ex_new_index(CRYPTO_EX_INDEX_DSA, argl, argp,
-				new_func, dup_func, free_func);
-        }
-
-int DSA_set_ex_data(DSA *d, int idx, void *arg)
-	{
-	return(CRYPTO_set_ex_data(&d->ex_data,idx,arg));
-	}
-
-void *DSA_get_ex_data(DSA *d, int idx)
-	{
-	return(CRYPTO_get_ex_data(&d->ex_data,idx));
-	}
-
-#ifndef OPENSSL_NO_DH
-DH *DSA_dup_DH(const DSA *r)
-	{
-	/* DSA has p, q, g, optional pub_key, optional priv_key.
-	 * DH has p, optional length, g, optional pub_key, optional priv_key.
-	 */ 
-
-	DH *ret = NULL;
-
-	if (r == NULL)
-		goto err;
-	ret = DH_new();
-	if (ret == NULL)
-		goto err;
-	if (r->p != NULL) 
-		if ((ret->p = BN_dup(r->p)) == NULL)
-			goto err;
-	if (r->q != NULL)
-		ret->length = BN_num_bits(r->q);
-	if (r->g != NULL)
-		if ((ret->g = BN_dup(r->g)) == NULL)
-			goto err;
-	if (r->pub_key != NULL)
-		if ((ret->pub_key = BN_dup(r->pub_key)) == NULL)
-			goto err;
-	if (r->priv_key != NULL)
-		if ((ret->priv_key = BN_dup(r->priv_key)) == NULL)
-			goto err;
-
-	return ret;
-
- err:
-	if (ret != NULL)
-		DH_free(ret);
-	return NULL;
-	}
-#endif
diff --git a/crypto/openssl/crypto/dsa/dsa_ossl.c b/crypto/openssl/crypto/dsa/dsa_ossl.c
deleted file mode 100644
index e6aad85825de..000000000000
--- a/crypto/openssl/crypto/dsa/dsa_ossl.c
+++ /dev/null
@@ -1,393 +0,0 @@
-/* crypto/dsa/dsa_ossl.c */
-/* Copyright (C) 1995-1998 Eric Young (eay@cryptsoft.com)
- * All rights reserved.
- *
- * This package is an SSL implementation written
- * by Eric Young (eay@cryptsoft.com).
- * The implementation was written so as to conform with Netscapes SSL.
- * 
- * This library is free for commercial and non-commercial use as long as
- * the following conditions are aheared to.  The following conditions
- * apply to all code found in this distribution, be it the RC4, RSA,
- * lhash, DES, etc., code; not just the SSL code.  The SSL documentation
- * included with this distribution is covered by the same copyright terms
- * except that the holder is Tim Hudson (tjh@cryptsoft.com).
- * 
- * Copyright remains Eric Young's, and as such any Copyright notices in
- * the code are not to be removed.
- * If this package is used in a product, Eric Young should be given attribution
- * as the author of the parts of the library used.
- * This can be in the form of a textual message at program startup or
- * in documentation (online or textual) provided with the package.
- * 
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions
- * are met:
- * 1. Redistributions of source code must retain the copyright
- *    notice, this list of conditions and the following disclaimer.
- * 2. Redistributions in binary form must reproduce the above copyright
- *    notice, this list of conditions and the following disclaimer in the
- *    documentation and/or other materials provided with the distribution.
- * 3. All advertising materials mentioning features or use of this software
- *    must display the following acknowledgement:
- *    "This product includes cryptographic software written by
- *     Eric Young (eay@cryptsoft.com)"
- *    The word 'cryptographic' can be left out if the rouines from the library
- *    being used are not cryptographic related :-).
- * 4. If you include any Windows specific code (or a derivative thereof) from 
- *    the apps directory (application code) you must include an acknowledgement:
- *    "This product includes software written by Tim Hudson (tjh@cryptsoft.com)"
- * 
- * THIS SOFTWARE IS PROVIDED BY ERIC YOUNG ``AS IS'' AND
- * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
- * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
- * ARE DISCLAIMED.  IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE
- * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
- * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
- * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
- * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
- * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
- * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
- * SUCH DAMAGE.
- * 
- * The licence and distribution terms for any publically available version or
- * derivative of this code cannot be changed.  i.e. this code cannot simply be
- * copied and put under another distribution licence
- * [including the GNU Public Licence.]
- */
-
-/* Original version from Steven Schoch <schoch@sheba.arc.nasa.gov> */
-
-#include <stdio.h>
-#include "cryptlib.h"
-#include <openssl/bn.h>
-#include <openssl/dsa.h>
-#include <openssl/rand.h>
-#include <openssl/asn1.h>
-
-static DSA_SIG *dsa_do_sign(const unsigned char *dgst, int dlen, DSA *dsa);
-static int dsa_sign_setup(DSA *dsa, BN_CTX *ctx_in, BIGNUM **kinvp, BIGNUM **rp);
-static int dsa_do_verify(const unsigned char *dgst, int dgst_len, DSA_SIG *sig,
-		  DSA *dsa);
-static int dsa_init(DSA *dsa);
-static int dsa_finish(DSA *dsa);
-
-static DSA_METHOD openssl_dsa_meth = {
-"OpenSSL DSA method",
-dsa_do_sign,
-dsa_sign_setup,
-dsa_do_verify,
-NULL, /* dsa_mod_exp, */
-NULL, /* dsa_bn_mod_exp, */
-dsa_init,
-dsa_finish,
-0,
-NULL,
-NULL,
-NULL
-};
-
-/* These macro wrappers replace attempts to use the dsa_mod_exp() and
- * bn_mod_exp() handlers in the DSA_METHOD structure. We avoid the problem of
- * having a the macro work as an expression by bundling an "err_instr". So;
- * 
- *     if (!dsa->meth->bn_mod_exp(dsa, r,dsa->g,&k,dsa->p,ctx,
- *                 dsa->method_mont_p)) goto err;
- *
- * can be replaced by;
- *
- *     DSA_BN_MOD_EXP(goto err, dsa, r, dsa->g, &k, dsa->p, ctx,
- *                 dsa->method_mont_p);
- */
-
-#define DSA_MOD_EXP(err_instr,dsa,rr,a1,p1,a2,p2,m,ctx,in_mont) \
-	do { \
-	int _tmp_res53; \
-	if((dsa)->meth->dsa_mod_exp) \
-		_tmp_res53 = (dsa)->meth->dsa_mod_exp((dsa), (rr), (a1), (p1), \
-				(a2), (p2), (m), (ctx), (in_mont)); \
-	else \
-		_tmp_res53 = BN_mod_exp2_mont((rr), (a1), (p1), (a2), (p2), \
-				(m), (ctx), (in_mont)); \
-	if(!_tmp_res53) err_instr; \
-	} while(0)
-#define DSA_BN_MOD_EXP(err_instr,dsa,r,a,p,m,ctx,m_ctx) \
-	do { \
-	int _tmp_res53; \
-	if((dsa)->meth->bn_mod_exp) \
-		_tmp_res53 = (dsa)->meth->bn_mod_exp((dsa), (r), (a), (p), \
-				(m), (ctx), (m_ctx)); \
-	else \
-		_tmp_res53 = BN_mod_exp_mont((r), (a), (p), (m), (ctx), (m_ctx)); \
-	if(!_tmp_res53) err_instr; \
-	} while(0)
-
-const DSA_METHOD *DSA_OpenSSL(void)
-{
-	return &openssl_dsa_meth;
-}
-
-static DSA_SIG *dsa_do_sign(const unsigned char *dgst, int dlen, DSA *dsa)
-	{
-	BIGNUM *kinv=NULL,*r=NULL,*s=NULL;
-	BIGNUM m;
-	BIGNUM xr;
-	BN_CTX *ctx=NULL;
-	int i,reason=ERR_R_BN_LIB;
-	DSA_SIG *ret=NULL;
-
-	BN_init(&m);
-	BN_init(&xr);
-
-	if (!dsa->p || !dsa->q || !dsa->g)
-		{
-		reason=DSA_R_MISSING_PARAMETERS;
-		goto err;
-		}
-
-	s=BN_new();
-	if (s == NULL) goto err;
-
-	i=BN_num_bytes(dsa->q); /* should be 20 */
-	if ((dlen > i) || (dlen > 50))
-		{
-		reason=DSA_R_DATA_TOO_LARGE_FOR_KEY_SIZE;
-		goto err;
-		}
-
-	ctx=BN_CTX_new();
-	if (ctx == NULL) goto err;
-
-	if ((dsa->kinv == NULL) || (dsa->r == NULL))
-		{
-		if (!DSA_sign_setup(dsa,ctx,&kinv,&r)) goto err;
-		}
-	else
-		{
-		kinv=dsa->kinv;
-		dsa->kinv=NULL;
-		r=dsa->r;
-		dsa->r=NULL;
-		}
-
-	if (BN_bin2bn(dgst,dlen,&m) == NULL) goto err;
-
-	/* Compute  s = inv(k) (m + xr) mod q */
-	if (!BN_mod_mul(&xr,dsa->priv_key,r,dsa->q,ctx)) goto err;/* s = xr */
-	if (!BN_add(s, &xr, &m)) goto err;		/* s = m + xr */
-	if (BN_cmp(s,dsa->q) > 0)
-		BN_sub(s,s,dsa->q);
-	if (!BN_mod_mul(s,s,kinv,dsa->q,ctx)) goto err;
-
-	ret=DSA_SIG_new();
-	if (ret == NULL) goto err;
-	ret->r = r;
-	ret->s = s;
-	
-err:
-	if (!ret)
-		{
-		DSAerr(DSA_F_DSA_DO_SIGN,reason);
-		BN_free(r);
-		BN_free(s);
-		}
-	if (ctx != NULL) BN_CTX_free(ctx);
-	BN_clear_free(&m);
-	BN_clear_free(&xr);
-	if (kinv != NULL) /* dsa->kinv is NULL now if we used it */
-	    BN_clear_free(kinv);
-	return(ret);
-	}
-
-static int dsa_sign_setup(DSA *dsa, BN_CTX *ctx_in, BIGNUM **kinvp, BIGNUM **rp)
-	{
-	BN_CTX *ctx;
-	BIGNUM k,kq,*K,*kinv=NULL,*r=NULL;
-	int ret=0;
-
-	if (!dsa->p || !dsa->q || !dsa->g)
-		{
-		DSAerr(DSA_F_DSA_SIGN_SETUP,DSA_R_MISSING_PARAMETERS);
-		return 0;
-		}
-
-	BN_init(&k);
-	BN_init(&kq);
-
-	if (ctx_in == NULL)
-		{
-		if ((ctx=BN_CTX_new()) == NULL) goto err;
-		}
-	else
-		ctx=ctx_in;
-
-	if ((r=BN_new()) == NULL) goto err;
-
-	/* Get random k */
-	do
-		if (!BN_rand_range(&k, dsa->q)) goto err;
-	while (BN_is_zero(&k));
-	if ((dsa->flags & DSA_FLAG_NO_EXP_CONSTTIME) == 0)
-		{
-		BN_set_flags(&k, BN_FLG_EXP_CONSTTIME);
-		}
-
-	if (dsa->flags & DSA_FLAG_CACHE_MONT_P)
-		{
-		if (!BN_MONT_CTX_set_locked(&dsa->method_mont_p,
-						CRYPTO_LOCK_DSA,
-						dsa->p, ctx))
-			goto err;
-		}
-
-	/* Compute r = (g^k mod p) mod q */
-
-	if ((dsa->flags & DSA_FLAG_NO_EXP_CONSTTIME) == 0)
-		{
-		if (!BN_copy(&kq, &k)) goto err;
-
-		/* We do not want timing information to leak the length of k,
-		 * so we compute g^k using an equivalent exponent of fixed length.
-		 *
-		 * (This is a kludge that we need because the BN_mod_exp_mont()
-		 * does not let us specify the desired timing behaviour.) */
-
-		if (!BN_add(&kq, &kq, dsa->q)) goto err;
-		if (BN_num_bits(&kq) <= BN_num_bits(dsa->q))
-			{
-			if (!BN_add(&kq, &kq, dsa->q)) goto err;
-			}
-
-		K = &kq;
-		}
-	else
-		{
-		K = &k;
-		}
-	DSA_BN_MOD_EXP(goto err, dsa, r, dsa->g, K, dsa->p, ctx,
-			dsa->method_mont_p);
-	if (!BN_mod(r,r,dsa->q,ctx)) goto err;
-
-	/* Compute  part of 's = inv(k) (m + xr) mod q' */
-	if ((kinv=BN_mod_inverse(NULL,&k,dsa->q,ctx)) == NULL) goto err;
-
-	if (*kinvp != NULL) BN_clear_free(*kinvp);
-	*kinvp=kinv;
-	kinv=NULL;
-	if (*rp != NULL) BN_clear_free(*rp);
-	*rp=r;
-	ret=1;
-err:
-	if (!ret)
-		{
-		DSAerr(DSA_F_DSA_SIGN_SETUP,ERR_R_BN_LIB);
-		if (kinv != NULL) BN_clear_free(kinv);
-		if (r != NULL) BN_clear_free(r);
-		}
-	if (ctx_in == NULL) BN_CTX_free(ctx);
-	if (kinv != NULL) BN_clear_free(kinv);
-	BN_clear_free(&k);
-	BN_clear_free(&kq);
-	return(ret);
-	}
-
-static int dsa_do_verify(const unsigned char *dgst, int dgst_len, DSA_SIG *sig,
-		  DSA *dsa)
-	{
-	BN_CTX *ctx;
-	BIGNUM u1,u2,t1;
-	BN_MONT_CTX *mont=NULL;
-	int ret = -1;
-	if (!dsa->p || !dsa->q || !dsa->g)
-		{
-		DSAerr(DSA_F_DSA_DO_VERIFY,DSA_R_MISSING_PARAMETERS);
-		return -1;
-		}
-
-	if (BN_num_bits(dsa->q) != 160)
-		{
-		DSAerr(DSA_F_DSA_DO_VERIFY,DSA_R_BAD_Q_VALUE);
-		return -1;
-		}
-
-	if (BN_num_bits(dsa->p) > OPENSSL_DSA_MAX_MODULUS_BITS)
-		{
-		DSAerr(DSA_F_DSA_DO_VERIFY,DSA_R_MODULUS_TOO_LARGE);
-		return -1;
-		}
-
-	BN_init(&u1);
-	BN_init(&u2);
-	BN_init(&t1);
-
-	if ((ctx=BN_CTX_new()) == NULL) goto err;
-
-	if (BN_is_zero(sig->r) || BN_is_negative(sig->r) ||
-	    BN_ucmp(sig->r, dsa->q) >= 0)
-		{
-		ret = 0;
-		goto err;
-		}
-	if (BN_is_zero(sig->s) || BN_is_negative(sig->s) ||
-	    BN_ucmp(sig->s, dsa->q) >= 0)
-		{
-		ret = 0;
-		goto err;
-		}
-
-	/* Calculate W = inv(S) mod Q
-	 * save W in u2 */
-	if ((BN_mod_inverse(&u2,sig->s,dsa->q,ctx)) == NULL) goto err;
-
-	/* save M in u1 */
-	if (BN_bin2bn(dgst,dgst_len,&u1) == NULL) goto err;
-
-	/* u1 = M * w mod q */
-	if (!BN_mod_mul(&u1,&u1,&u2,dsa->q,ctx)) goto err;
-
-	/* u2 = r * w mod q */
-	if (!BN_mod_mul(&u2,sig->r,&u2,dsa->q,ctx)) goto err;
-
-
-	if (dsa->flags & DSA_FLAG_CACHE_MONT_P)
-		{
-		mont = BN_MONT_CTX_set_locked(&dsa->method_mont_p,
-					CRYPTO_LOCK_DSA, dsa->p, ctx);
-		if (!mont)
-			goto err;
-		}
-
-
-	DSA_MOD_EXP(goto err, dsa, &t1, dsa->g, &u1, dsa->pub_key, &u2, dsa->p, ctx, mont);
-	/* BN_copy(&u1,&t1); */
-	/* let u1 = u1 mod q */
-	if (!BN_mod(&u1,&t1,dsa->q,ctx)) goto err;
-
-	/* V is now in u1.  If the signature is correct, it will be
-	 * equal to R. */
-	ret=(BN_ucmp(&u1, sig->r) == 0);
-
-	err:
-	/* XXX: surely this is wrong - if ret is 0, it just didn't verify;
-	   there is no error in BN. Test should be ret == -1 (Ben) */
-	if (ret != 1) DSAerr(DSA_F_DSA_DO_VERIFY,ERR_R_BN_LIB);
-	if (ctx != NULL) BN_CTX_free(ctx);
-	BN_free(&u1);
-	BN_free(&u2);
-	BN_free(&t1);
-	return(ret);
-	}
-
-static int dsa_init(DSA *dsa)
-{
-	dsa->flags|=DSA_FLAG_CACHE_MONT_P;
-	return(1);
-}
-
-static int dsa_finish(DSA *dsa)
-{
-	if(dsa->method_mont_p)
-		BN_MONT_CTX_free(dsa->method_mont_p);
-	return(1);
-}
-
diff --git a/crypto/openssl/crypto/dsa/dsa_sign.c b/crypto/openssl/crypto/dsa/dsa_sign.c
deleted file mode 100644
index 89205026f01b..000000000000
--- a/crypto/openssl/crypto/dsa/dsa_sign.c
+++ /dev/null
@@ -1,92 +0,0 @@
-/* crypto/dsa/dsa_sign.c */
-/* Copyright (C) 1995-1998 Eric Young (eay@cryptsoft.com)
- * All rights reserved.
- *
- * This package is an SSL implementation written
- * by Eric Young (eay@cryptsoft.com).
- * The implementation was written so as to conform with Netscapes SSL.
- * 
- * This library is free for commercial and non-commercial use as long as
- * the following conditions are aheared to.  The following conditions
- * apply to all code found in this distribution, be it the RC4, RSA,
- * lhash, DES, etc., code; not just the SSL code.  The SSL documentation
- * included with this distribution is covered by the same copyright terms
- * except that the holder is Tim Hudson (tjh@cryptsoft.com).
- * 
- * Copyright remains Eric Young's, and as such any Copyright notices in
- * the code are not to be removed.
- * If this package is used in a product, Eric Young should be given attribution
- * as the author of the parts of the library used.
- * This can be in the form of a textual message at program startup or
- * in documentation (online or textual) provided with the package.
- * 
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions
- * are met:
- * 1. Redistributions of source code must retain the copyright
- *    notice, this list of conditions and the following disclaimer.
- * 2. Redistributions in binary form must reproduce the above copyright
- *    notice, this list of conditions and the following disclaimer in the
- *    documentation and/or other materials provided with the distribution.
- * 3. All advertising materials mentioning features or use of this software
- *    must display the following acknowledgement:
- *    "This product includes cryptographic software written by
- *     Eric Young (eay@cryptsoft.com)"
- *    The word 'cryptographic' can be left out if the rouines from the library
- *    being used are not cryptographic related :-).
- * 4. If you include any Windows specific code (or a derivative thereof) from 
- *    the apps directory (application code) you must include an acknowledgement:
- *    "This product includes software written by Tim Hudson (tjh@cryptsoft.com)"
- * 
- * THIS SOFTWARE IS PROVIDED BY ERIC YOUNG ``AS IS'' AND
- * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
- * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
- * ARE DISCLAIMED.  IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE
- * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
- * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
- * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
- * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
- * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
- * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
- * SUCH DAMAGE.
- * 
- * The licence and distribution terms for any publically available version or
- * derivative of this code cannot be changed.  i.e. this code cannot simply be
- * copied and put under another distribution licence
- * [including the GNU Public Licence.]
- */
-
-/* Original version from Steven Schoch <schoch@sheba.arc.nasa.gov> */
-
-#include <stdio.h>
-#include "cryptlib.h"
-#include <openssl/bn.h>
-#include <openssl/dsa.h>
-#include <openssl/rand.h>
-#include <openssl/asn1.h>
-
-DSA_SIG * DSA_do_sign(const unsigned char *dgst, int dlen, DSA *dsa)
-	{
-	return dsa->meth->dsa_do_sign(dgst, dlen, dsa);
-	}
-
-int DSA_sign(int type, const unsigned char *dgst, int dlen, unsigned char *sig,
-	     unsigned int *siglen, DSA *dsa)
-	{
-	DSA_SIG *s;
-	s=DSA_do_sign(dgst,dlen,dsa);
-	if (s == NULL)
-		{
-		*siglen=0;
-		return(0);
-		}
-	*siglen=i2d_DSA_SIG(s,&sig);
-	DSA_SIG_free(s);
-	return(1);
-	}
-
-int DSA_sign_setup(DSA *dsa, BN_CTX *ctx_in, BIGNUM **kinvp, BIGNUM **rp)
-	{
-	return dsa->meth->dsa_sign_setup(dsa, ctx_in, kinvp, rp);
-	}
-
diff --git a/crypto/openssl/crypto/dsa/dsa_vrf.c b/crypto/openssl/crypto/dsa/dsa_vrf.c
deleted file mode 100644
index c4aeddd05604..000000000000
--- a/crypto/openssl/crypto/dsa/dsa_vrf.c
+++ /dev/null
@@ -1,94 +0,0 @@
-/* crypto/dsa/dsa_vrf.c */
-/* Copyright (C) 1995-1998 Eric Young (eay@cryptsoft.com)
- * All rights reserved.
- *
- * This package is an SSL implementation written
- * by Eric Young (eay@cryptsoft.com).
- * The implementation was written so as to conform with Netscapes SSL.
- * 
- * This library is free for commercial and non-commercial use as long as
- * the following conditions are aheared to.  The following conditions
- * apply to all code found in this distribution, be it the RC4, RSA,
- * lhash, DES, etc., code; not just the SSL code.  The SSL documentation
- * included with this distribution is covered by the same copyright terms
- * except that the holder is Tim Hudson (tjh@cryptsoft.com).
- * 
- * Copyright remains Eric Young's, and as such any Copyright notices in
- * the code are not to be removed.
- * If this package is used in a product, Eric Young should be given attribution
- * as the author of the parts of the library used.
- * This can be in the form of a textual message at program startup or
- * in documentation (online or textual) provided with the package.
- * 
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions
- * are met:
- * 1. Redistributions of source code must retain the copyright
- *    notice, this list of conditions and the following disclaimer.
- * 2. Redistributions in binary form must reproduce the above copyright
- *    notice, this list of conditions and the following disclaimer in the
- *    documentation and/or other materials provided with the distribution.
- * 3. All advertising materials mentioning features or use of this software
- *    must display the following acknowledgement:
- *    "This product includes cryptographic software written by
- *     Eric Young (eay@cryptsoft.com)"
- *    The word 'cryptographic' can be left out if the rouines from the library
- *    being used are not cryptographic related :-).
- * 4. If you include any Windows specific code (or a derivative thereof) from 
- *    the apps directory (application code) you must include an acknowledgement:
- *    "This product includes software written by Tim Hudson (tjh@cryptsoft.com)"
- * 
- * THIS SOFTWARE IS PROVIDED BY ERIC YOUNG ``AS IS'' AND
- * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
- * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
- * ARE DISCLAIMED.  IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE
- * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
- * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
- * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
- * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
- * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
- * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
- * SUCH DAMAGE.
- * 
- * The licence and distribution terms for any publically available version or
- * derivative of this code cannot be changed.  i.e. this code cannot simply be
- * copied and put under another distribution licence
- * [including the GNU Public Licence.]
- */
-
-/* Original version from Steven Schoch <schoch@sheba.arc.nasa.gov> */
-
-#include <stdio.h>
-#include "cryptlib.h"
-#include <openssl/bn.h>
-#include <openssl/dsa.h>
-#include <openssl/rand.h>
-#include <openssl/asn1.h>
-#include <openssl/asn1_mac.h>
-
-int DSA_do_verify(const unsigned char *dgst, int dgst_len, DSA_SIG *sig,
-		  DSA *dsa)
-	{
-	return dsa->meth->dsa_do_verify(dgst, dgst_len, sig, dsa);
-	}
-
-/* data has already been hashed (probably with SHA or SHA-1). */
-/* returns
- *      1: correct signature
- *      0: incorrect signature
- *     -1: error
- */
-int DSA_verify(int type, const unsigned char *dgst, int dgst_len,
-	     const unsigned char *sigbuf, int siglen, DSA *dsa)
-	{
-	DSA_SIG *s;
-	int ret=-1;
-
-	s = DSA_SIG_new();
-	if (s == NULL) return(ret);
-	if (d2i_DSA_SIG(&s,&sigbuf,siglen) == NULL) goto err;
-	ret=DSA_do_verify(dgst,dgst_len,s,dsa);
-err:
-	DSA_SIG_free(s);
-	return(ret);
-	}
diff --git a/crypto/openssl/crypto/dsa/dsagen.c b/crypto/openssl/crypto/dsa/dsagen.c
deleted file mode 100644
index 1b6a1cca0fec..000000000000
--- a/crypto/openssl/crypto/dsa/dsagen.c
+++ /dev/null
@@ -1,111 +0,0 @@
-/* crypto/dsa/dsagen.c */
-/* Copyright (C) 1995-1998 Eric Young (eay@cryptsoft.com)
- * All rights reserved.
- *
- * This package is an SSL implementation written
- * by Eric Young (eay@cryptsoft.com).
- * The implementation was written so as to conform with Netscapes SSL.
- * 
- * This library is free for commercial and non-commercial use as long as
- * the following conditions are aheared to.  The following conditions
- * apply to all code found in this distribution, be it the RC4, RSA,
- * lhash, DES, etc., code; not just the SSL code.  The SSL documentation
- * included with this distribution is covered by the same copyright terms
- * except that the holder is Tim Hudson (tjh@cryptsoft.com).
- * 
- * Copyright remains Eric Young's, and as such any Copyright notices in
- * the code are not to be removed.
- * If this package is used in a product, Eric Young should be given attribution
- * as the author of the parts of the library used.
- * This can be in the form of a textual message at program startup or
- * in documentation (online or textual) provided with the package.
- * 
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions
- * are met:
- * 1. Redistributions of source code must retain the copyright
- *    notice, this list of conditions and the following disclaimer.
- * 2. Redistributions in binary form must reproduce the above copyright
- *    notice, this list of conditions and the following disclaimer in the
- *    documentation and/or other materials provided with the distribution.
- * 3. All advertising materials mentioning features or use of this software
- *    must display the following acknowledgement:
- *    "This product includes cryptographic software written by
- *     Eric Young (eay@cryptsoft.com)"
- *    The word 'cryptographic' can be left out if the rouines from the library
- *    being used are not cryptographic related :-).
- * 4. If you include any Windows specific code (or a derivative thereof) from 
- *    the apps directory (application code) you must include an acknowledgement:
- *    "This product includes software written by Tim Hudson (tjh@cryptsoft.com)"
- * 
- * THIS SOFTWARE IS PROVIDED BY ERIC YOUNG ``AS IS'' AND
- * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
- * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
- * ARE DISCLAIMED.  IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE
- * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
- * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
- * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
- * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
- * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
- * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
- * SUCH DAMAGE.
- * 
- * The licence and distribution terms for any publically available version or
- * derivative of this code cannot be changed.  i.e. this code cannot simply be
- * copied and put under another distribution licence
- * [including the GNU Public Licence.]
- */
-
-#include <stdio.h>
-#include <openssl/dsa.h>
-
-#define TEST
-#define GENUINE_DSA
-
-#ifdef GENUINE_DSA
-#define LAST_VALUE 0xbd
-#else
-#define LAST_VALUE 0xd3
-#endif
-
-#ifdef TEST
-unsigned char seed[20]={
-	0xd5,0x01,0x4e,0x4b,
-	0x60,0xef,0x2b,0xa8,
-	0xb6,0x21,0x1b,0x40,
-	0x62,0xba,0x32,0x24,
-	0xe0,0x42,0x7d,LAST_VALUE};
-#endif
-
-int cb(int p, int n)
-	{
-	char c='*';
-
-	if (p == 0) c='.';
-	if (p == 1) c='+';
-	if (p == 2) c='*';
-	if (p == 3) c='\n';
-	printf("%c",c);
-	fflush(stdout);
-	}
-
-main()
-	{
-	int i;
-	BIGNUM *n;
-	BN_CTX *ctx;
-	unsigned char seed_buf[20];
-	DSA *dsa;
-	int counter,h;
-	BIO *bio_err=NULL;
-
-	if (bio_err == NULL)
-		bio_err=BIO_new_fp(stderr,BIO_NOCLOSE);
-
-	memcpy(seed_buf,seed,20);
-	dsa=DSA_generate_parameters(1024,seed,20,&counter,&h,cb,bio_err);
-
-	if (dsa == NULL)
-		DSA_print(bio_err,dsa,0);
-	}
-
diff --git a/crypto/openssl/crypto/dsa/dsatest.c b/crypto/openssl/crypto/dsa/dsatest.c
deleted file mode 100644
index 912317bb443c..000000000000
--- a/crypto/openssl/crypto/dsa/dsatest.c
+++ /dev/null
@@ -1,260 +0,0 @@
-/* crypto/dsa/dsatest.c */
-/* Copyright (C) 1995-1998 Eric Young (eay@cryptsoft.com)
- * All rights reserved.
- *
- * This package is an SSL implementation written
- * by Eric Young (eay@cryptsoft.com).
- * The implementation was written so as to conform with Netscapes SSL.
- * 
- * This library is free for commercial and non-commercial use as long as
- * the following conditions are aheared to.  The following conditions
- * apply to all code found in this distribution, be it the RC4, RSA,
- * lhash, DES, etc., code; not just the SSL code.  The SSL documentation
- * included with this distribution is covered by the same copyright terms
- * except that the holder is Tim Hudson (tjh@cryptsoft.com).
- * 
- * Copyright remains Eric Young's, and as such any Copyright notices in
- * the code are not to be removed.
- * If this package is used in a product, Eric Young should be given attribution
- * as the author of the parts of the library used.
- * This can be in the form of a textual message at program startup or
- * in documentation (online or textual) provided with the package.
- * 
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions
- * are met:
- * 1. Redistributions of source code must retain the copyright
- *    notice, this list of conditions and the following disclaimer.
- * 2. Redistributions in binary form must reproduce the above copyright
- *    notice, this list of conditions and the following disclaimer in the
- *    documentation and/or other materials provided with the distribution.
- * 3. All advertising materials mentioning features or use of this software
- *    must display the following acknowledgement:
- *    "This product includes cryptographic software written by
- *     Eric Young (eay@cryptsoft.com)"
- *    The word 'cryptographic' can be left out if the rouines from the library
- *    being used are not cryptographic related :-).
- * 4. If you include any Windows specific code (or a derivative thereof) from 
- *    the apps directory (application code) you must include an acknowledgement:
- *    "This product includes software written by Tim Hudson (tjh@cryptsoft.com)"
- * 
- * THIS SOFTWARE IS PROVIDED BY ERIC YOUNG ``AS IS'' AND
- * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
- * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
- * ARE DISCLAIMED.  IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE
- * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
- * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
- * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
- * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
- * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
- * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
- * SUCH DAMAGE.
- * 
- * The licence and distribution terms for any publically available version or
- * derivative of this code cannot be changed.  i.e. this code cannot simply be
- * copied and put under another distribution licence
- * [including the GNU Public Licence.]
- */
-
-/* Until the key-gen callbacks are modified to use newer prototypes, we allow
- * deprecated functions for openssl-internal code */
-#ifdef OPENSSL_NO_DEPRECATED
-#undef OPENSSL_NO_DEPRECATED
-#endif
-
-#include <stdio.h>
-#include <stdlib.h>
-#include <string.h>
-#include <sys/types.h>
-#include <sys/stat.h>
-
-#include "../e_os.h"
-
-#include <openssl/crypto.h>
-#include <openssl/rand.h>
-#include <openssl/bio.h>
-#include <openssl/err.h>
-#include <openssl/bn.h>
-
-#ifdef OPENSSL_NO_DSA
-int main(int argc, char *argv[])
-{
-    printf("No DSA support\n");
-    return(0);
-}
-#else
-#include <openssl/dsa.h>
-
-#ifdef OPENSSL_SYS_WIN16
-#define MS_CALLBACK     _far _loadds
-#else
-#define MS_CALLBACK
-#endif
-
-static int MS_CALLBACK dsa_cb(int p, int n, BN_GENCB *arg);
-
-/* seed, out_p, out_q, out_g are taken from the updated Appendix 5 to
- * FIPS PUB 186 and also appear in Appendix 5 to FIPS PIB 186-1 */
-static unsigned char seed[20]={
-	0xd5,0x01,0x4e,0x4b,0x60,0xef,0x2b,0xa8,0xb6,0x21,0x1b,0x40,
-	0x62,0xba,0x32,0x24,0xe0,0x42,0x7d,0xd3,
-	};
-
-static unsigned char out_p[]={
-	0x8d,0xf2,0xa4,0x94,0x49,0x22,0x76,0xaa,
-	0x3d,0x25,0x75,0x9b,0xb0,0x68,0x69,0xcb,
-	0xea,0xc0,0xd8,0x3a,0xfb,0x8d,0x0c,0xf7,
-	0xcb,0xb8,0x32,0x4f,0x0d,0x78,0x82,0xe5,
-	0xd0,0x76,0x2f,0xc5,0xb7,0x21,0x0e,0xaf,
-	0xc2,0xe9,0xad,0xac,0x32,0xab,0x7a,0xac,
-	0x49,0x69,0x3d,0xfb,0xf8,0x37,0x24,0xc2,
-	0xec,0x07,0x36,0xee,0x31,0xc8,0x02,0x91,
-	};
-
-static unsigned char out_q[]={
-	0xc7,0x73,0x21,0x8c,0x73,0x7e,0xc8,0xee,
-	0x99,0x3b,0x4f,0x2d,0xed,0x30,0xf4,0x8e,
-	0xda,0xce,0x91,0x5f,
-	};
-
-static unsigned char out_g[]={
-	0x62,0x6d,0x02,0x78,0x39,0xea,0x0a,0x13,
-	0x41,0x31,0x63,0xa5,0x5b,0x4c,0xb5,0x00,
-	0x29,0x9d,0x55,0x22,0x95,0x6c,0xef,0xcb,
-	0x3b,0xff,0x10,0xf3,0x99,0xce,0x2c,0x2e,
-	0x71,0xcb,0x9d,0xe5,0xfa,0x24,0xba,0xbf,
-	0x58,0xe5,0xb7,0x95,0x21,0x92,0x5c,0x9c,
-	0xc4,0x2e,0x9f,0x6f,0x46,0x4b,0x08,0x8c,
-	0xc5,0x72,0xaf,0x53,0xe6,0xd7,0x88,0x02,
-	};
-
-static const unsigned char str1[]="12345678901234567890";
-
-static const char rnd_seed[] = "string to make the random number generator think it has entropy";
-
-static BIO *bio_err=NULL;
-
-int main(int argc, char **argv)
-	{
-	BN_GENCB cb;
-	DSA *dsa=NULL;
-	int counter,ret=0,i,j;
-	unsigned char buf[256];
-	unsigned long h;
-	unsigned char sig[256];
-	unsigned int siglen;
-
-	if (bio_err == NULL)
-		bio_err=BIO_new_fp(stderr,BIO_NOCLOSE);
-
-	CRYPTO_malloc_debug_init();
-	CRYPTO_dbg_set_options(V_CRYPTO_MDEBUG_ALL);
-	CRYPTO_mem_ctrl(CRYPTO_MEM_CHECK_ON);
-
-	ERR_load_crypto_strings();
-	RAND_seed(rnd_seed, sizeof rnd_seed);
-
-	BIO_printf(bio_err,"test generation of DSA parameters\n");
-
-	BN_GENCB_set(&cb, dsa_cb, bio_err);
-	if(((dsa = DSA_new()) == NULL) || !DSA_generate_parameters_ex(dsa, 512,
-				seed, 20, &counter, &h, &cb))
-		goto end;
-
-	BIO_printf(bio_err,"seed\n");
-	for (i=0; i<20; i+=4)
-		{
-		BIO_printf(bio_err,"%02X%02X%02X%02X ",
-			seed[i],seed[i+1],seed[i+2],seed[i+3]);
-		}
-	BIO_printf(bio_err,"\ncounter=%d h=%ld\n",counter,h);
-		
-	if (dsa == NULL) goto end;
-	DSA_print(bio_err,dsa,0);
-	if (counter != 105) 
-		{
-		BIO_printf(bio_err,"counter should be 105\n");
-		goto end;
-		}
-	if (h != 2)
-		{
-		BIO_printf(bio_err,"h should be 2\n");
-		goto end;
-		}
-
-	i=BN_bn2bin(dsa->q,buf);
-	j=sizeof(out_q);
-	if ((i != j) || (memcmp(buf,out_q,i) != 0))
-		{
-		BIO_printf(bio_err,"q value is wrong\n");
-		goto end;
-		}
-
-	i=BN_bn2bin(dsa->p,buf);
-	j=sizeof(out_p);
-	if ((i != j) || (memcmp(buf,out_p,i) != 0))
-		{
-		BIO_printf(bio_err,"p value is wrong\n");
-		goto end;
-		}
-
-	i=BN_bn2bin(dsa->g,buf);
-	j=sizeof(out_g);
-	if ((i != j) || (memcmp(buf,out_g,i) != 0))
-		{
-		BIO_printf(bio_err,"g value is wrong\n");
-		goto end;
-		}
-
-	dsa->flags |= DSA_FLAG_NO_EXP_CONSTTIME;
-	DSA_generate_key(dsa);
-	DSA_sign(0, str1, 20, sig, &siglen, dsa);
-	if (DSA_verify(0, str1, 20, sig, siglen, dsa) == 1)
-		ret=1;
-
-	dsa->flags &= ~DSA_FLAG_NO_EXP_CONSTTIME;
-	DSA_generate_key(dsa);
-	DSA_sign(0, str1, 20, sig, &siglen, dsa);
-	if (DSA_verify(0, str1, 20, sig, siglen, dsa) == 1)
-		ret=1;
-
-end:
-	if (!ret)
-		ERR_print_errors(bio_err);
-	if (dsa != NULL) DSA_free(dsa);
-	CRYPTO_cleanup_all_ex_data();
-	ERR_remove_state(0);
-	ERR_free_strings();
-	CRYPTO_mem_leaks(bio_err);
-	if (bio_err != NULL)
-		{
-		BIO_free(bio_err);
-		bio_err = NULL;
-		}
-#ifdef OPENSSL_SYS_NETWARE
-    if (!ret) printf("ERROR\n");
-#endif
-	EXIT(!ret);
-	return(0);
-	}
-
-static int MS_CALLBACK dsa_cb(int p, int n, BN_GENCB *arg)
-	{
-	char c='*';
-	static int ok=0,num=0;
-
-	if (p == 0) { c='.'; num++; };
-	if (p == 1) c='+';
-	if (p == 2) { c='*'; ok++; }
-	if (p == 3) c='\n';
-	BIO_write(arg->arg,&c,1);
-	(void)BIO_flush(arg->arg);
-
-	if (!ok && (p == 0) && (num > 1))
-		{
-		BIO_printf((BIO *)arg,"error in dsatest\n");
-		return 0;
-		}
-	return 1;
-	}
-#endif
diff --git a/crypto/openssl/crypto/dsa/fips186a.txt b/crypto/openssl/crypto/dsa/fips186a.txt
deleted file mode 100644
index 3a2e0a0d51a2..000000000000
--- a/crypto/openssl/crypto/dsa/fips186a.txt
+++ /dev/null
@@ -1,122 +0,0 @@
-The origional FIPE 180 used SHA-0 (FIPS 180) for its appendix 5
-examples.  This is an updated version that uses SHA-1 (FIPS 180-1)
-supplied to me by Wei Dai
---
-		     APPENDIX 5. EXAMPLE OF THE DSA
-
-
-This appendix is for informational purposes only and is not required to meet
-the standard.
-
-Let L = 512 (size of p).  The values in this example are expressed in
-hexadecimal notation.  The p and q given here were generated by the prime
-generation standard described in appendix 2 using the 160-bit SEED:
-
-          d5014e4b 60ef2ba8 b6211b40 62ba3224 e0427dd3
-
-With this SEED, the algorithm found p and q when the counter was at 105.
-
-x was generated by the algorithm described in appendix 3, section 3.1, using
-the SHA to construct G (as in appendix 3, section 3.3) and a 160-bit XSEED:
-
-XSEED =   
-
-	bd029bbe 7f51960b cf9edb2b 61f06f0f eb5a38b6
-
-t =
-	67452301 EFCDAB89 98BADCFE 10325476 C3D2E1F0
-
-x = G(t,XSEED) mod q
-
-k was generated by the algorithm described in appendix 3, section 3.2, using
-the SHA to construct G (as in appendix 3, section 3.3) and a 160-bit KSEED:
-
-KSEED =
-
-	687a66d9 0648f993 867e121f 4ddf9ddb 01205584
-
-t =
-	EFCDAB89 98BADCFE 10325476 C3D2E1F0 67452301
-
-k = G(t,KSEED) mod q
-
-Finally:
-
-h = 2
-
-p =
-	8df2a494 492276aa 3d25759b b06869cb eac0d83a fb8d0cf7
-	cbb8324f 0d7882e5 d0762fc5 b7210eaf c2e9adac 32ab7aac
-	49693dfb f83724c2 ec0736ee 31c80291
-
-
-q =
-	c773218c 737ec8ee 993b4f2d ed30f48e dace915f
-
-
-g =
-	626d0278 39ea0a13 413163a5 5b4cb500 299d5522 956cefcb
-	3bff10f3 99ce2c2e 71cb9de5 fa24babf 58e5b795 21925c9c
-	c42e9f6f 464b088c c572af53 e6d78802
-
-
-x =
-	2070b322 3dba372f de1c0ffc 7b2e3b49 8b260614
-
-
-k =
-	358dad57 1462710f 50e254cf 1a376b2b deaadfbf
-
-
-kinv = 
-
-	0d516729 8202e49b 4116ac10 4fc3f415 ae52f917
-
-M = ASCII form of "abc" (See FIPS PUB 180-1, Appendix A)
-
-SHA(M) =  
-
-	a9993e36 4706816a ba3e2571 7850c26c 9cd0d89d
-
-
-y =
-
-	19131871 d75b1612 a819f29d 78d1b0d7 346f7aa7 7bb62a85 
-	9bfd6c56 75da9d21 2d3a36ef 1672ef66 0b8c7c25 5cc0ec74
-	858fba33 f44c0669 9630a76b 030ee333
-
-
-r =
-	8bac1ab6 6410435c b7181f95 b16ab97c 92b341c0
-
-s =
-	41e2345f 1f56df24 58f426d1 55b4ba2d b6dcd8c8
-
-
-w =
-	9df4ece5 826be95f ed406d41 b43edc0b 1c18841b
-
-
-u1 =
-	bf655bd0 46f0b35e c791b004 804afcbb 8ef7d69d
-
-
-u2 =
-	821a9263 12e97ade abcc8d08 2b527897 8a2df4b0
-
-
-gu1 mod p =
-
-	51b1bf86 7888e5f3 af6fb476 9dd016bc fe667a65 aafc2753
-	9063bd3d 2b138b4c e02cc0c0 2ec62bb6 7306c63e 4db95bbf
-	6f96662a 1987a21b e4ec1071 010b6069
-
-
-yu2 mod p =
-
-	8b510071 2957e950 50d6b8fd 376a668e 4b0d633c 1e46e665
-	5c611a72 e2b28483 be52c74d 4b30de61 a668966e dc307a67 
-	c19441f4 22bf3c34 08aeba1f 0a4dbec7
-
-v =
-	8bac1ab6 6410435c b7181f95 b16ab97c 92b341c0
diff --git a/crypto/openssl/crypto/dso/Makefile b/crypto/openssl/crypto/dso/Makefile
deleted file mode 100644
index 07f5d8d159e6..000000000000
--- a/crypto/openssl/crypto/dso/Makefile
+++ /dev/null
@@ -1,142 +0,0 @@
-#
-# OpenSSL/crypto/dso/Makefile
-#
-
-DIR=	dso
-TOP=	../..
-CC=	cc
-INCLUDES= -I.. -I$(TOP) -I../../include
-CFLAG=-g
-MAKEFILE=	Makefile
-AR=		ar r
-
-CFLAGS= $(INCLUDES) $(CFLAG)
-
-GENERAL=Makefile
-TEST=
-APPS=
-
-LIB=$(TOP)/libcrypto.a
-LIBSRC= dso_dl.c dso_dlfcn.c dso_err.c dso_lib.c dso_null.c \
-	dso_openssl.c dso_win32.c dso_vms.c
-LIBOBJ= dso_dl.o dso_dlfcn.o dso_err.o dso_lib.o dso_null.o \
-	dso_openssl.o dso_win32.o dso_vms.o
-
-SRC= $(LIBSRC)
-
-EXHEADER= dso.h
-HEADER=	$(EXHEADER)
-
-ALL=    $(GENERAL) $(SRC) $(HEADER)
-
-top:
-	(cd ../..; $(MAKE) DIRS=crypto SDIRS=$(DIR) sub_all)
-
-all:	lib
-
-lib:	$(LIBOBJ)
-	$(AR) $(LIB) $(LIBOBJ)
-	$(RANLIB) $(LIB) || echo Never mind.
-	@touch lib
-
-files:
-	$(PERL) $(TOP)/util/files.pl Makefile >> $(TOP)/MINFO
-
-links:
-	@$(PERL) $(TOP)/util/mklink.pl ../../include/openssl $(EXHEADER)
-	@$(PERL) $(TOP)/util/mklink.pl ../../test $(TEST)
-	@$(PERL) $(TOP)/util/mklink.pl ../../apps $(APPS)
-
-install:
-	@[ -n "$(INSTALLTOP)" ] # should be set by top Makefile...
-	@headerlist="$(EXHEADER)"; for i in $$headerlist ; \
-	do  \
-	(cp $$i $(INSTALL_PREFIX)$(INSTALLTOP)/include/openssl/$$i; \
-	chmod 644 $(INSTALL_PREFIX)$(INSTALLTOP)/include/openssl/$$i ); \
-	done;
-
-tags:
-	ctags $(SRC)
-
-tests:
-
-lint:
-	lint -DLINT $(INCLUDES) $(SRC)>fluff
-
-depend:
-	@[ -n "$(MAKEDEPEND)" ] # should be set by upper Makefile...
-	$(MAKEDEPEND) -- $(CFLAG) $(INCLUDES) $(DEPFLAG) -- $(PROGS) $(LIBSRC)
-
-dclean:
-	$(PERL) -pe 'if (/^# DO NOT DELETE THIS LINE/) {print; exit(0);}' $(MAKEFILE) >Makefile.new
-	mv -f Makefile.new $(MAKEFILE)
-
-clean:
-	rm -f *.o */*.o *.obj lib tags core .pure .nfs* *.old *.bak fluff
-
-# DO NOT DELETE THIS LINE -- make depend depends on it.
-
-dso_dl.o: ../../e_os.h ../../include/openssl/bio.h
-dso_dl.o: ../../include/openssl/buffer.h ../../include/openssl/crypto.h
-dso_dl.o: ../../include/openssl/dso.h ../../include/openssl/e_os2.h
-dso_dl.o: ../../include/openssl/err.h ../../include/openssl/lhash.h
-dso_dl.o: ../../include/openssl/opensslconf.h ../../include/openssl/opensslv.h
-dso_dl.o: ../../include/openssl/ossl_typ.h ../../include/openssl/safestack.h
-dso_dl.o: ../../include/openssl/stack.h ../../include/openssl/symhacks.h
-dso_dl.o: ../cryptlib.h dso_dl.c
-dso_dlfcn.o: ../../e_os.h ../../include/openssl/bio.h
-dso_dlfcn.o: ../../include/openssl/buffer.h ../../include/openssl/crypto.h
-dso_dlfcn.o: ../../include/openssl/dso.h ../../include/openssl/e_os2.h
-dso_dlfcn.o: ../../include/openssl/err.h ../../include/openssl/lhash.h
-dso_dlfcn.o: ../../include/openssl/opensslconf.h
-dso_dlfcn.o: ../../include/openssl/opensslv.h ../../include/openssl/ossl_typ.h
-dso_dlfcn.o: ../../include/openssl/safestack.h ../../include/openssl/stack.h
-dso_dlfcn.o: ../../include/openssl/symhacks.h ../cryptlib.h dso_dlfcn.c
-dso_err.o: ../../include/openssl/bio.h ../../include/openssl/crypto.h
-dso_err.o: ../../include/openssl/dso.h ../../include/openssl/e_os2.h
-dso_err.o: ../../include/openssl/err.h ../../include/openssl/lhash.h
-dso_err.o: ../../include/openssl/opensslconf.h ../../include/openssl/opensslv.h
-dso_err.o: ../../include/openssl/ossl_typ.h ../../include/openssl/safestack.h
-dso_err.o: ../../include/openssl/stack.h ../../include/openssl/symhacks.h
-dso_err.o: dso_err.c
-dso_lib.o: ../../e_os.h ../../include/openssl/bio.h
-dso_lib.o: ../../include/openssl/buffer.h ../../include/openssl/crypto.h
-dso_lib.o: ../../include/openssl/dso.h ../../include/openssl/e_os2.h
-dso_lib.o: ../../include/openssl/err.h ../../include/openssl/lhash.h
-dso_lib.o: ../../include/openssl/opensslconf.h ../../include/openssl/opensslv.h
-dso_lib.o: ../../include/openssl/ossl_typ.h ../../include/openssl/safestack.h
-dso_lib.o: ../../include/openssl/stack.h ../../include/openssl/symhacks.h
-dso_lib.o: ../cryptlib.h dso_lib.c
-dso_null.o: ../../e_os.h ../../include/openssl/bio.h
-dso_null.o: ../../include/openssl/buffer.h ../../include/openssl/crypto.h
-dso_null.o: ../../include/openssl/dso.h ../../include/openssl/e_os2.h
-dso_null.o: ../../include/openssl/err.h ../../include/openssl/lhash.h
-dso_null.o: ../../include/openssl/opensslconf.h
-dso_null.o: ../../include/openssl/opensslv.h ../../include/openssl/ossl_typ.h
-dso_null.o: ../../include/openssl/safestack.h ../../include/openssl/stack.h
-dso_null.o: ../../include/openssl/symhacks.h ../cryptlib.h dso_null.c
-dso_openssl.o: ../../e_os.h ../../include/openssl/bio.h
-dso_openssl.o: ../../include/openssl/buffer.h ../../include/openssl/crypto.h
-dso_openssl.o: ../../include/openssl/dso.h ../../include/openssl/e_os2.h
-dso_openssl.o: ../../include/openssl/err.h ../../include/openssl/lhash.h
-dso_openssl.o: ../../include/openssl/opensslconf.h
-dso_openssl.o: ../../include/openssl/opensslv.h
-dso_openssl.o: ../../include/openssl/ossl_typ.h
-dso_openssl.o: ../../include/openssl/safestack.h ../../include/openssl/stack.h
-dso_openssl.o: ../../include/openssl/symhacks.h ../cryptlib.h dso_openssl.c
-dso_vms.o: ../../e_os.h ../../include/openssl/bio.h
-dso_vms.o: ../../include/openssl/buffer.h ../../include/openssl/crypto.h
-dso_vms.o: ../../include/openssl/dso.h ../../include/openssl/e_os2.h
-dso_vms.o: ../../include/openssl/err.h ../../include/openssl/lhash.h
-dso_vms.o: ../../include/openssl/opensslconf.h ../../include/openssl/opensslv.h
-dso_vms.o: ../../include/openssl/ossl_typ.h ../../include/openssl/safestack.h
-dso_vms.o: ../../include/openssl/stack.h ../../include/openssl/symhacks.h
-dso_vms.o: ../cryptlib.h dso_vms.c
-dso_win32.o: ../../e_os.h ../../include/openssl/bio.h
-dso_win32.o: ../../include/openssl/buffer.h ../../include/openssl/crypto.h
-dso_win32.o: ../../include/openssl/dso.h ../../include/openssl/e_os2.h
-dso_win32.o: ../../include/openssl/err.h ../../include/openssl/lhash.h
-dso_win32.o: ../../include/openssl/opensslconf.h
-dso_win32.o: ../../include/openssl/opensslv.h ../../include/openssl/ossl_typ.h
-dso_win32.o: ../../include/openssl/safestack.h ../../include/openssl/stack.h
-dso_win32.o: ../../include/openssl/symhacks.h ../cryptlib.h dso_win32.c
diff --git a/crypto/openssl/crypto/dso/README b/crypto/openssl/crypto/dso/README
deleted file mode 100644
index d0bc9a89fbd4..000000000000
--- a/crypto/openssl/crypto/dso/README
+++ /dev/null
@@ -1,22 +0,0 @@
-NOTES
------
-
-I've checked out HPUX (well, version 11 at least) and shl_t is
-a pointer type so it's safe to use in the way it has been in
-dso_dl.c. On the other hand, HPUX11 support dlfcn too and
-according to their man page, prefer developers to move to that.
-I'll leave Richard's changes there as I guess dso_dl is needed
-for HPUX10.20.
-
-There is now a callback scheme in place where filename conversion can
-(a) be turned off altogether through the use of the
-    DSO_FLAG_NO_NAME_TRANSLATION flag,
-(b) be handled by default using the default DSO_METHOD's converter
-(c) overriden per-DSO by setting the override callback
-(d) a mix of (b) and (c) - eg. implement an override callback that;
-    (i) checks if we're win32 (if(strstr(dso->meth->name, "win32")....)
-        and if so, convert "blah" into "blah32.dll" (the default is
-	otherwise to make it "blah.dll").
-    (ii) default to the normal behaviour - we're not on win32, eg.
-         finish with (return dso->meth->dso_name_converter(dso,NULL)).
-
diff --git a/crypto/openssl/crypto/dso/dso.h b/crypto/openssl/crypto/dso/dso.h
deleted file mode 100644
index 3e51913a725b..000000000000
--- a/crypto/openssl/crypto/dso/dso.h
+++ /dev/null
@@ -1,368 +0,0 @@
-/* dso.h -*- mode:C; c-file-style: "eay" -*- */
-/* Written by Geoff Thorpe (geoff@geoffthorpe.net) for the OpenSSL
- * project 2000.
- */
-/* ====================================================================
- * Copyright (c) 2000 The OpenSSL Project.  All rights reserved.
- *
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions
- * are met:
- *
- * 1. Redistributions of source code must retain the above copyright
- *    notice, this list of conditions and the following disclaimer. 
- *
- * 2. Redistributions in binary form must reproduce the above copyright
- *    notice, this list of conditions and the following disclaimer in
- *    the documentation and/or other materials provided with the
- *    distribution.
- *
- * 3. All advertising materials mentioning features or use of this
- *    software must display the following acknowledgment:
- *    "This product includes software developed by the OpenSSL Project
- *    for use in the OpenSSL Toolkit. (http://www.OpenSSL.org/)"
- *
- * 4. The names "OpenSSL Toolkit" and "OpenSSL Project" must not be used to
- *    endorse or promote products derived from this software without
- *    prior written permission. For written permission, please contact
- *    licensing@OpenSSL.org.
- *
- * 5. Products derived from this software may not be called "OpenSSL"
- *    nor may "OpenSSL" appear in their names without prior written
- *    permission of the OpenSSL Project.
- *
- * 6. Redistributions of any form whatsoever must retain the following
- *    acknowledgment:
- *    "This product includes software developed by the OpenSSL Project
- *    for use in the OpenSSL Toolkit (http://www.OpenSSL.org/)"
- *
- * THIS SOFTWARE IS PROVIDED BY THE OpenSSL PROJECT ``AS IS'' AND ANY
- * EXPRESSED OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
- * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR
- * PURPOSE ARE DISCLAIMED.  IN NO EVENT SHALL THE OpenSSL PROJECT OR
- * ITS CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
- * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
- * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
- * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
- * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
- * STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
- * ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED
- * OF THE POSSIBILITY OF SUCH DAMAGE.
- * ====================================================================
- *
- * This product includes cryptographic software written by Eric Young
- * (eay@cryptsoft.com).  This product includes software written by Tim
- * Hudson (tjh@cryptsoft.com).
- *
- */
-
-#ifndef HEADER_DSO_H
-#define HEADER_DSO_H
-
-#include <openssl/crypto.h>
-
-#ifdef __cplusplus
-extern "C" {
-#endif
-
-/* These values are used as commands to DSO_ctrl() */
-#define DSO_CTRL_GET_FLAGS	1
-#define DSO_CTRL_SET_FLAGS	2
-#define DSO_CTRL_OR_FLAGS	3
-
-/* By default, DSO_load() will translate the provided filename into a form
- * typical for the platform (more specifically the DSO_METHOD) using the
- * dso_name_converter function of the method. Eg. win32 will transform "blah"
- * into "blah.dll", and dlfcn will transform it into "libblah.so". The
- * behaviour can be overriden by setting the name_converter callback in the DSO
- * object (using DSO_set_name_converter()). This callback could even utilise
- * the DSO_METHOD's converter too if it only wants to override behaviour for
- * one or two possible DSO methods. However, the following flag can be set in a
- * DSO to prevent *any* native name-translation at all - eg. if the caller has
- * prompted the user for a path to a driver library so the filename should be
- * interpreted as-is. */
-#define DSO_FLAG_NO_NAME_TRANSLATION		0x01
-/* An extra flag to give if only the extension should be added as
- * translation.  This is obviously only of importance on Unix and
- * other operating systems where the translation also may prefix
- * the name with something, like 'lib', and ignored everywhere else.
- * This flag is also ignored if DSO_FLAG_NO_NAME_TRANSLATION is used
- * at the same time. */
-#define DSO_FLAG_NAME_TRANSLATION_EXT_ONLY	0x02
-
-/* The following flag controls the translation of symbol names to upper
- * case.  This is currently only being implemented for OpenVMS.
- */
-#define DSO_FLAG_UPCASE_SYMBOL			0x10
-
-/* This flag loads the library with public symbols.
- * Meaning: The exported symbols of this library are public
- * to all libraries loaded after this library.
- * At the moment only implemented in unix.
- */
-#define DSO_FLAG_GLOBAL_SYMBOLS			0x20
-
-
-typedef void (*DSO_FUNC_TYPE)(void);
-
-typedef struct dso_st DSO;
-
-/* The function prototype used for method functions (or caller-provided
- * callbacks) that transform filenames. They are passed a DSO structure pointer
- * (or NULL if they are to be used independantly of a DSO object) and a
- * filename to transform. They should either return NULL (if there is an error
- * condition) or a newly allocated string containing the transformed form that
- * the caller will need to free with OPENSSL_free() when done. */
-typedef char* (*DSO_NAME_CONVERTER_FUNC)(DSO *, const char *);
-/* The function prototype used for method functions (or caller-provided
- * callbacks) that merge two file specifications. They are passed a
- * DSO structure pointer (or NULL if they are to be used independantly of
- * a DSO object) and two file specifications to merge. They should
- * either return NULL (if there is an error condition) or a newly allocated
- * string containing the result of merging that the caller will need
- * to free with OPENSSL_free() when done.
- * Here, merging means that bits and pieces are taken from each of the
- * file specifications and added together in whatever fashion that is
- * sensible for the DSO method in question.  The only rule that really
- * applies is that if the two specification contain pieces of the same
- * type, the copy from the first string takes priority.  One could see
- * it as the first specification is the one given by the user and the
- * second being a bunch of defaults to add on if they're missing in the
- * first. */
-typedef char* (*DSO_MERGER_FUNC)(DSO *, const char *, const char *);
-
-typedef struct dso_meth_st
-	{
-	const char *name;
-	/* Loads a shared library, NB: new DSO_METHODs must ensure that a
-	 * successful load populates the loaded_filename field, and likewise a
-	 * successful unload OPENSSL_frees and NULLs it out. */
-	int (*dso_load)(DSO *dso);
-	/* Unloads a shared library */
-	int (*dso_unload)(DSO *dso);
-	/* Binds a variable */
-	void *(*dso_bind_var)(DSO *dso, const char *symname);
-	/* Binds a function - assumes a return type of DSO_FUNC_TYPE.
-	 * This should be cast to the real function prototype by the
-	 * caller. Platforms that don't have compatible representations
-	 * for different prototypes (this is possible within ANSI C)
-	 * are highly unlikely to have shared libraries at all, let
-	 * alone a DSO_METHOD implemented for them. */
-	DSO_FUNC_TYPE (*dso_bind_func)(DSO *dso, const char *symname);
-
-/* I don't think this would actually be used in any circumstances. */
-#if 0
-	/* Unbinds a variable */
-	int (*dso_unbind_var)(DSO *dso, char *symname, void *symptr);
-	/* Unbinds a function */
-	int (*dso_unbind_func)(DSO *dso, char *symname, DSO_FUNC_TYPE symptr);
-#endif
-	/* The generic (yuck) "ctrl()" function. NB: Negative return
-	 * values (rather than zero) indicate errors. */
-	long (*dso_ctrl)(DSO *dso, int cmd, long larg, void *parg);
-	/* The default DSO_METHOD-specific function for converting filenames to
-	 * a canonical native form. */
-	DSO_NAME_CONVERTER_FUNC dso_name_converter;
-	/* The default DSO_METHOD-specific function for converting filenames to
-	 * a canonical native form. */
-	DSO_MERGER_FUNC dso_merger;
-
-	/* [De]Initialisation handlers. */
-	int (*init)(DSO *dso);
-	int (*finish)(DSO *dso);
-	} DSO_METHOD;
-
-/**********************************************************************/
-/* The low-level handle type used to refer to a loaded shared library */
-
-struct dso_st
-	{
-	DSO_METHOD *meth;
-	/* Standard dlopen uses a (void *). Win32 uses a HANDLE. VMS
-	 * doesn't use anything but will need to cache the filename
-	 * for use in the dso_bind handler. All in all, let each
-	 * method control its own destiny. "Handles" and such go in
-	 * a STACK. */
-	STACK *meth_data;
-	int references;
-	int flags;
-	/* For use by applications etc ... use this for your bits'n'pieces,
-	 * don't touch meth_data! */
-	CRYPTO_EX_DATA ex_data;
-	/* If this callback function pointer is set to non-NULL, then it will
-	 * be used in DSO_load() in place of meth->dso_name_converter. NB: This
-	 * should normally set using DSO_set_name_converter(). */
-	DSO_NAME_CONVERTER_FUNC name_converter;
-	/* If this callback function pointer is set to non-NULL, then it will
-	 * be used in DSO_load() in place of meth->dso_merger. NB: This
-	 * should normally set using DSO_set_merger(). */
-	DSO_MERGER_FUNC merger;
-	/* This is populated with (a copy of) the platform-independant
-	 * filename used for this DSO. */
-	char *filename;
-	/* This is populated with (a copy of) the translated filename by which
-	 * the DSO was actually loaded. It is NULL iff the DSO is not currently
-	 * loaded. NB: This is here because the filename translation process
-	 * may involve a callback being invoked more than once not only to
-	 * convert to a platform-specific form, but also to try different
-	 * filenames in the process of trying to perform a load. As such, this
-	 * variable can be used to indicate (a) whether this DSO structure
-	 * corresponds to a loaded library or not, and (b) the filename with
-	 * which it was actually loaded. */
-	char *loaded_filename;
-	};
-
-
-DSO *	DSO_new(void);
-DSO *	DSO_new_method(DSO_METHOD *method);
-int	DSO_free(DSO *dso);
-int	DSO_flags(DSO *dso);
-int	DSO_up_ref(DSO *dso);
-long	DSO_ctrl(DSO *dso, int cmd, long larg, void *parg);
-
-/* This function sets the DSO's name_converter callback. If it is non-NULL,
- * then it will be used instead of the associated DSO_METHOD's function. If
- * oldcb is non-NULL then it is set to the function pointer value being
- * replaced. Return value is non-zero for success. */
-int	DSO_set_name_converter(DSO *dso, DSO_NAME_CONVERTER_FUNC cb,
-				DSO_NAME_CONVERTER_FUNC *oldcb);
-/* These functions can be used to get/set the platform-independant filename
- * used for a DSO. NB: set will fail if the DSO is already loaded. */
-const char *DSO_get_filename(DSO *dso);
-int	DSO_set_filename(DSO *dso, const char *filename);
-/* This function will invoke the DSO's name_converter callback to translate a
- * filename, or if the callback isn't set it will instead use the DSO_METHOD's
- * converter. If "filename" is NULL, the "filename" in the DSO itself will be
- * used. If the DSO_FLAG_NO_NAME_TRANSLATION flag is set, then the filename is
- * simply duplicated. NB: This function is usually called from within a
- * DSO_METHOD during the processing of a DSO_load() call, and is exposed so that
- * caller-created DSO_METHODs can do the same thing. A non-NULL return value
- * will need to be OPENSSL_free()'d. */
-char	*DSO_convert_filename(DSO *dso, const char *filename);
-/* This function will invoke the DSO's merger callback to merge two file
- * specifications, or if the callback isn't set it will instead use the
- * DSO_METHOD's merger.  A non-NULL return value will need to be
- * OPENSSL_free()'d. */
-char	*DSO_merge(DSO *dso, const char *filespec1, const char *filespec2);
-/* If the DSO is currently loaded, this returns the filename that it was loaded
- * under, otherwise it returns NULL. So it is also useful as a test as to
- * whether the DSO is currently loaded. NB: This will not necessarily return
- * the same value as DSO_convert_filename(dso, dso->filename), because the
- * DSO_METHOD's load function may have tried a variety of filenames (with
- * and/or without the aid of the converters) before settling on the one it
- * actually loaded. */
-const char *DSO_get_loaded_filename(DSO *dso);
-
-void	DSO_set_default_method(DSO_METHOD *meth);
-DSO_METHOD *DSO_get_default_method(void);
-DSO_METHOD *DSO_get_method(DSO *dso);
-DSO_METHOD *DSO_set_method(DSO *dso, DSO_METHOD *meth);
-
-/* The all-singing all-dancing load function, you normally pass NULL
- * for the first and third parameters. Use DSO_up and DSO_free for
- * subsequent reference count handling. Any flags passed in will be set
- * in the constructed DSO after its init() function but before the
- * load operation. If 'dso' is non-NULL, 'flags' is ignored. */
-DSO *DSO_load(DSO *dso, const char *filename, DSO_METHOD *meth, int flags);
-
-/* This function binds to a variable inside a shared library. */
-void *DSO_bind_var(DSO *dso, const char *symname);
-
-/* This function binds to a function inside a shared library. */
-DSO_FUNC_TYPE DSO_bind_func(DSO *dso, const char *symname);
-
-/* This method is the default, but will beg, borrow, or steal whatever
- * method should be the default on any particular platform (including
- * DSO_METH_null() if necessary). */
-DSO_METHOD *DSO_METHOD_openssl(void);
-
-/* This method is defined for all platforms - if a platform has no
- * DSO support then this will be the only method! */
-DSO_METHOD *DSO_METHOD_null(void);
-
-/* If DSO_DLFCN is defined, the standard dlfcn.h-style functions
- * (dlopen, dlclose, dlsym, etc) will be used and incorporated into
- * this method. If not, this method will return NULL. */
-DSO_METHOD *DSO_METHOD_dlfcn(void);
-
-/* If DSO_DL is defined, the standard dl.h-style functions (shl_load, 
- * shl_unload, shl_findsym, etc) will be used and incorporated into
- * this method. If not, this method will return NULL. */
-DSO_METHOD *DSO_METHOD_dl(void);
-
-/* If WIN32 is defined, use DLLs. If not, return NULL. */
-DSO_METHOD *DSO_METHOD_win32(void);
-
-/* If VMS is defined, use shared images. If not, return NULL. */
-DSO_METHOD *DSO_METHOD_vms(void);
-
-/* BEGIN ERROR CODES */
-/* The following lines are auto generated by the script mkerr.pl. Any changes
- * made after this point may be overwritten when the script is next run.
- */
-void ERR_load_DSO_strings(void);
-
-/* Error codes for the DSO functions. */
-
-/* Function codes. */
-#define DSO_F_DLFCN_BIND_FUNC				 100
-#define DSO_F_DLFCN_BIND_VAR				 101
-#define DSO_F_DLFCN_LOAD				 102
-#define DSO_F_DLFCN_MERGER				 130
-#define DSO_F_DLFCN_NAME_CONVERTER			 123
-#define DSO_F_DLFCN_UNLOAD				 103
-#define DSO_F_DL_BIND_FUNC				 104
-#define DSO_F_DL_BIND_VAR				 105
-#define DSO_F_DL_LOAD					 106
-#define DSO_F_DL_MERGER					 131
-#define DSO_F_DL_NAME_CONVERTER				 124
-#define DSO_F_DL_UNLOAD					 107
-#define DSO_F_DSO_BIND_FUNC				 108
-#define DSO_F_DSO_BIND_VAR				 109
-#define DSO_F_DSO_CONVERT_FILENAME			 126
-#define DSO_F_DSO_CTRL					 110
-#define DSO_F_DSO_FREE					 111
-#define DSO_F_DSO_GET_FILENAME				 127
-#define DSO_F_DSO_GET_LOADED_FILENAME			 128
-#define DSO_F_DSO_LOAD					 112
-#define DSO_F_DSO_MERGE					 132
-#define DSO_F_DSO_NEW_METHOD				 113
-#define DSO_F_DSO_SET_FILENAME				 129
-#define DSO_F_DSO_SET_NAME_CONVERTER			 122
-#define DSO_F_DSO_UP_REF				 114
-#define DSO_F_VMS_BIND_SYM				 115
-#define DSO_F_VMS_LOAD					 116
-#define DSO_F_VMS_MERGER				 133
-#define DSO_F_VMS_UNLOAD				 117
-#define DSO_F_WIN32_BIND_FUNC				 118
-#define DSO_F_WIN32_BIND_VAR				 119
-#define DSO_F_WIN32_JOINER				 135
-#define DSO_F_WIN32_LOAD				 120
-#define DSO_F_WIN32_MERGER				 134
-#define DSO_F_WIN32_NAME_CONVERTER			 125
-#define DSO_F_WIN32_SPLITTER				 136
-#define DSO_F_WIN32_UNLOAD				 121
-
-/* Reason codes. */
-#define DSO_R_CTRL_FAILED				 100
-#define DSO_R_DSO_ALREADY_LOADED			 110
-#define DSO_R_EMPTY_FILE_STRUCTURE			 113
-#define DSO_R_FAILURE					 114
-#define DSO_R_FILENAME_TOO_BIG				 101
-#define DSO_R_FINISH_FAILED				 102
-#define DSO_R_INCORRECT_FILE_SYNTAX			 115
-#define DSO_R_LOAD_FAILED				 103
-#define DSO_R_NAME_TRANSLATION_FAILED			 109
-#define DSO_R_NO_FILENAME				 111
-#define DSO_R_NO_FILE_SPECIFICATION			 116
-#define DSO_R_NULL_HANDLE				 104
-#define DSO_R_SET_FILENAME_FAILED			 112
-#define DSO_R_STACK_ERROR				 105
-#define DSO_R_SYM_FAILURE				 106
-#define DSO_R_UNLOAD_FAILED				 107
-#define DSO_R_UNSUPPORTED				 108
-
-#ifdef  __cplusplus
-}
-#endif
-#endif
diff --git a/crypto/openssl/crypto/dso/dso_dl.c b/crypto/openssl/crypto/dso/dso_dl.c
deleted file mode 100644
index 417abb6ea95f..000000000000
--- a/crypto/openssl/crypto/dso/dso_dl.c
+++ /dev/null
@@ -1,353 +0,0 @@
-/* dso_dl.c -*- mode:C; c-file-style: "eay" -*- */
-/* Written by Richard Levitte (richard@levitte.org) for the OpenSSL
- * project 2000.
- */
-/* ====================================================================
- * Copyright (c) 2000 The OpenSSL Project.  All rights reserved.
- *
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions
- * are met:
- *
- * 1. Redistributions of source code must retain the above copyright
- *    notice, this list of conditions and the following disclaimer. 
- *
- * 2. Redistributions in binary form must reproduce the above copyright
- *    notice, this list of conditions and the following disclaimer in
- *    the documentation and/or other materials provided with the
- *    distribution.
- *
- * 3. All advertising materials mentioning features or use of this
- *    software must display the following acknowledgment:
- *    "This product includes software developed by the OpenSSL Project
- *    for use in the OpenSSL Toolkit. (http://www.OpenSSL.org/)"
- *
- * 4. The names "OpenSSL Toolkit" and "OpenSSL Project" must not be used to
- *    endorse or promote products derived from this software without
- *    prior written permission. For written permission, please contact
- *    licensing@OpenSSL.org.
- *
- * 5. Products derived from this software may not be called "OpenSSL"
- *    nor may "OpenSSL" appear in their names without prior written
- *    permission of the OpenSSL Project.
- *
- * 6. Redistributions of any form whatsoever must retain the following
- *    acknowledgment:
- *    "This product includes software developed by the OpenSSL Project
- *    for use in the OpenSSL Toolkit (http://www.OpenSSL.org/)"
- *
- * THIS SOFTWARE IS PROVIDED BY THE OpenSSL PROJECT ``AS IS'' AND ANY
- * EXPRESSED OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
- * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR
- * PURPOSE ARE DISCLAIMED.  IN NO EVENT SHALL THE OpenSSL PROJECT OR
- * ITS CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
- * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
- * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
- * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
- * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
- * STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
- * ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED
- * OF THE POSSIBILITY OF SUCH DAMAGE.
- * ====================================================================
- *
- * This product includes cryptographic software written by Eric Young
- * (eay@cryptsoft.com).  This product includes software written by Tim
- * Hudson (tjh@cryptsoft.com).
- *
- */
-
-#include <stdio.h>
-#include "cryptlib.h"
-#include <openssl/dso.h>
-
-#ifndef DSO_DL
-DSO_METHOD *DSO_METHOD_dl(void)
-       {
-       return NULL;
-       }
-#else
-
-#include <dl.h>
-
-/* Part of the hack in "dl_load" ... */
-#define DSO_MAX_TRANSLATED_SIZE 256
-
-static int dl_load(DSO *dso);
-static int dl_unload(DSO *dso);
-static void *dl_bind_var(DSO *dso, const char *symname);
-static DSO_FUNC_TYPE dl_bind_func(DSO *dso, const char *symname);
-#if 0
-static int dl_unbind_var(DSO *dso, char *symname, void *symptr);
-static int dl_unbind_func(DSO *dso, char *symname, DSO_FUNC_TYPE symptr);
-static int dl_init(DSO *dso);
-static int dl_finish(DSO *dso);
-static int dl_ctrl(DSO *dso, int cmd, long larg, void *parg);
-#endif
-static char *dl_name_converter(DSO *dso, const char *filename);
-static char *dl_merger(DSO *dso, const char *filespec1, const char *filespec2);
-
-static DSO_METHOD dso_meth_dl = {
-	"OpenSSL 'dl' shared library method",
-	dl_load,
-	dl_unload,
-	dl_bind_var,
-	dl_bind_func,
-/* For now, "unbind" doesn't exist */
-#if 0
-	NULL, /* unbind_var */
-	NULL, /* unbind_func */
-#endif
-	NULL, /* ctrl */
-	dl_name_converter,
-	dl_merger,
-	NULL, /* init */
-	NULL  /* finish */
-	};
-
-DSO_METHOD *DSO_METHOD_dl(void)
-	{
-	return(&dso_meth_dl);
-	}
-
-/* For this DSO_METHOD, our meth_data STACK will contain;
- * (i) the handle (shl_t) returned from shl_load().
- * NB: I checked on HPUX11 and shl_t is itself a pointer
- * type so the cast is safe.
- */
-
-static int dl_load(DSO *dso)
-	{
-	shl_t ptr = NULL;
-	/* We don't do any fancy retries or anything, just take the method's
-	 * (or DSO's if it has the callback set) best translation of the
-	 * platform-independant filename and try once with that. */
-	char *filename= DSO_convert_filename(dso, NULL);
-
-	if(filename == NULL)
-		{
-		DSOerr(DSO_F_DL_LOAD,DSO_R_NO_FILENAME);
-		goto err;
-		}
-	ptr = shl_load(filename, BIND_IMMEDIATE |
-		(dso->flags&DSO_FLAG_NO_NAME_TRANSLATION?0:DYNAMIC_PATH), 0L);
-	if(ptr == NULL)
-		{
-		DSOerr(DSO_F_DL_LOAD,DSO_R_LOAD_FAILED);
-		ERR_add_error_data(4, "filename(", filename, "): ",
-			strerror(errno));
-		goto err;
-		}
-	if(!sk_push(dso->meth_data, (char *)ptr))
-		{
-		DSOerr(DSO_F_DL_LOAD,DSO_R_STACK_ERROR);
-		goto err;
-		}
-	/* Success, stick the converted filename we've loaded under into the DSO
-	 * (it also serves as the indicator that we are currently loaded). */
-	dso->loaded_filename = filename;
-	return(1);
-err:
-	/* Cleanup! */
-	if(filename != NULL)
-		OPENSSL_free(filename);
-	if(ptr != NULL)
-		shl_unload(ptr);
-	return(0);
-	}
-
-static int dl_unload(DSO *dso)
-	{
-	shl_t ptr;
-	if(dso == NULL)
-		{
-		DSOerr(DSO_F_DL_UNLOAD,ERR_R_PASSED_NULL_PARAMETER);
-		return(0);
-		}
-	if(sk_num(dso->meth_data) < 1)
-		return(1);
-	/* Is this statement legal? */
-	ptr = (shl_t)sk_pop(dso->meth_data);
-	if(ptr == NULL)
-		{
-		DSOerr(DSO_F_DL_UNLOAD,DSO_R_NULL_HANDLE);
-		/* Should push the value back onto the stack in
-		 * case of a retry. */
-		sk_push(dso->meth_data, (char *)ptr);
-		return(0);
-		}
-	shl_unload(ptr);
-	return(1);
-	}
-
-static void *dl_bind_var(DSO *dso, const char *symname)
-	{
-	shl_t ptr;
-	void *sym;
-
-	if((dso == NULL) || (symname == NULL))
-		{
-		DSOerr(DSO_F_DL_BIND_VAR,ERR_R_PASSED_NULL_PARAMETER);
-		return(NULL);
-		}
-	if(sk_num(dso->meth_data) < 1)
-		{
-		DSOerr(DSO_F_DL_BIND_VAR,DSO_R_STACK_ERROR);
-		return(NULL);
-		}
-	ptr = (shl_t)sk_value(dso->meth_data, sk_num(dso->meth_data) - 1);
-	if(ptr == NULL)
-		{
-		DSOerr(DSO_F_DL_BIND_VAR,DSO_R_NULL_HANDLE);
-		return(NULL);
-		}
-	if (shl_findsym(&ptr, symname, TYPE_UNDEFINED, &sym) < 0)
-		{
-		DSOerr(DSO_F_DL_BIND_VAR,DSO_R_SYM_FAILURE);
-		ERR_add_error_data(4, "symname(", symname, "): ",
-			strerror(errno));
-		return(NULL);
-		}
-	return(sym);
-	}
-
-static DSO_FUNC_TYPE dl_bind_func(DSO *dso, const char *symname)
-	{
-	shl_t ptr;
-	void *sym;
-
-	if((dso == NULL) || (symname == NULL))
-		{
-		DSOerr(DSO_F_DL_BIND_FUNC,ERR_R_PASSED_NULL_PARAMETER);
-		return(NULL);
-		}
-	if(sk_num(dso->meth_data) < 1)
-		{
-		DSOerr(DSO_F_DL_BIND_FUNC,DSO_R_STACK_ERROR);
-		return(NULL);
-		}
-	ptr = (shl_t)sk_value(dso->meth_data, sk_num(dso->meth_data) - 1);
-	if(ptr == NULL)
-		{
-		DSOerr(DSO_F_DL_BIND_FUNC,DSO_R_NULL_HANDLE);
-		return(NULL);
-		}
-	if (shl_findsym(&ptr, symname, TYPE_UNDEFINED, &sym) < 0)
-		{
-		DSOerr(DSO_F_DL_BIND_FUNC,DSO_R_SYM_FAILURE);
-		ERR_add_error_data(4, "symname(", symname, "): ",
-			strerror(errno));
-		return(NULL);
-		}
-	return((DSO_FUNC_TYPE)sym);
-	}
-
-static char *dl_merger(DSO *dso, const char *filespec1, const char *filespec2)
-	{
-	char *merged;
-
-	if(!filespec1 && !filespec2)
-		{
-		DSOerr(DSO_F_DL_MERGER,
-				ERR_R_PASSED_NULL_PARAMETER);
-		return(NULL);
-		}
-	/* If the first file specification is a rooted path, it rules.
-	   same goes if the second file specification is missing. */
-	if (!filespec2 || filespec1[0] == '/')
-		{
-		merged = OPENSSL_malloc(strlen(filespec1) + 1);
-		if(!merged)
-			{
-			DSOerr(DSO_F_DL_MERGER,
-				ERR_R_MALLOC_FAILURE);
-			return(NULL);
-			}
-		strcpy(merged, filespec1);
-		}
-	/* If the first file specification is missing, the second one rules. */
-	else if (!filespec1)
-		{
-		merged = OPENSSL_malloc(strlen(filespec2) + 1);
-		if(!merged)
-			{
-			DSOerr(DSO_F_DL_MERGER,
-				ERR_R_MALLOC_FAILURE);
-			return(NULL);
-			}
-		strcpy(merged, filespec2);
-		}
-	else
-		/* This part isn't as trivial as it looks.  It assumes that
-		   the second file specification really is a directory, and
-		   makes no checks whatsoever.  Therefore, the result becomes
-		   the concatenation of filespec2 followed by a slash followed
-		   by filespec1. */
-		{
-		int spec2len, len;
-
-		spec2len = (filespec2 ? strlen(filespec2) : 0);
-		len = spec2len + (filespec1 ? strlen(filespec1) : 0);
-
-		if(filespec2 && filespec2[spec2len - 1] == '/')
-			{
-			spec2len--;
-			len--;
-			}
-		merged = OPENSSL_malloc(len + 2);
-		if(!merged)
-			{
-			DSOerr(DSO_F_DL_MERGER,
-				ERR_R_MALLOC_FAILURE);
-			return(NULL);
-			}
-		strcpy(merged, filespec2);
-		merged[spec2len] = '/';
-		strcpy(&merged[spec2len + 1], filespec1);
-		}
-	return(merged);
-	}
-
-/* This function is identical to the one in dso_dlfcn.c, but as it is highly
- * unlikely that both the "dl" *and* "dlfcn" variants are being compiled at the
- * same time, there's no great duplicating the code. Figuring out an elegant 
- * way to share one copy of the code would be more difficult and would not
- * leave the implementations independant. */
-#if defined(__hpux)
-static const char extension[] = ".sl";
-#else
-static const char extension[] = ".so";
-#endif
-static char *dl_name_converter(DSO *dso, const char *filename)
-	{
-	char *translated;
-	int len, rsize, transform;
-
-	len = strlen(filename);
-	rsize = len + 1;
-	transform = (strstr(filename, "/") == NULL);
-		{
-		/* We will convert this to "%s.s?" or "lib%s.s?" */
-		rsize += strlen(extension);/* The length of ".s?" */
-		if ((DSO_flags(dso) & DSO_FLAG_NAME_TRANSLATION_EXT_ONLY) == 0)
-			rsize += 3; /* The length of "lib" */
-		}
-	translated = OPENSSL_malloc(rsize);
-	if(translated == NULL)
-		{
-		DSOerr(DSO_F_DL_NAME_CONVERTER,
-				DSO_R_NAME_TRANSLATION_FAILED); 
-		return(NULL);   
-		}
-	if(transform)
-		{
-		if ((DSO_flags(dso) & DSO_FLAG_NAME_TRANSLATION_EXT_ONLY) == 0)
-			sprintf(translated, "lib%s%s", filename, extension);
-		else
-			sprintf(translated, "%s%s", filename, extension);
-		}
-	else
-		sprintf(translated, "%s", filename);
-	return(translated);
-	}
-
-#endif /* DSO_DL */
diff --git a/crypto/openssl/crypto/dso/dso_dlfcn.c b/crypto/openssl/crypto/dso/dso_dlfcn.c
deleted file mode 100644
index 1fd10104c521..000000000000
--- a/crypto/openssl/crypto/dso/dso_dlfcn.c
+++ /dev/null
@@ -1,369 +0,0 @@
-/* dso_dlfcn.c -*- mode:C; c-file-style: "eay" -*- */
-/* Written by Geoff Thorpe (geoff@geoffthorpe.net) for the OpenSSL
- * project 2000.
- */
-/* ====================================================================
- * Copyright (c) 2000 The OpenSSL Project.  All rights reserved.
- *
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions
- * are met:
- *
- * 1. Redistributions of source code must retain the above copyright
- *    notice, this list of conditions and the following disclaimer. 
- *
- * 2. Redistributions in binary form must reproduce the above copyright
- *    notice, this list of conditions and the following disclaimer in
- *    the documentation and/or other materials provided with the
- *    distribution.
- *
- * 3. All advertising materials mentioning features or use of this
- *    software must display the following acknowledgment:
- *    "This product includes software developed by the OpenSSL Project
- *    for use in the OpenSSL Toolkit. (http://www.OpenSSL.org/)"
- *
- * 4. The names "OpenSSL Toolkit" and "OpenSSL Project" must not be used to
- *    endorse or promote products derived from this software without
- *    prior written permission. For written permission, please contact
- *    licensing@OpenSSL.org.
- *
- * 5. Products derived from this software may not be called "OpenSSL"
- *    nor may "OpenSSL" appear in their names without prior written
- *    permission of the OpenSSL Project.
- *
- * 6. Redistributions of any form whatsoever must retain the following
- *    acknowledgment:
- *    "This product includes software developed by the OpenSSL Project
- *    for use in the OpenSSL Toolkit (http://www.OpenSSL.org/)"
- *
- * THIS SOFTWARE IS PROVIDED BY THE OpenSSL PROJECT ``AS IS'' AND ANY
- * EXPRESSED OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
- * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR
- * PURPOSE ARE DISCLAIMED.  IN NO EVENT SHALL THE OpenSSL PROJECT OR
- * ITS CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
- * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
- * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
- * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
- * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
- * STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
- * ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED
- * OF THE POSSIBILITY OF SUCH DAMAGE.
- * ====================================================================
- *
- * This product includes cryptographic software written by Eric Young
- * (eay@cryptsoft.com).  This product includes software written by Tim
- * Hudson (tjh@cryptsoft.com).
- *
- */
-
-#include <stdio.h>
-#include "cryptlib.h"
-#include <openssl/dso.h>
-
-#ifndef DSO_DLFCN
-DSO_METHOD *DSO_METHOD_dlfcn(void)
-	{
-	return NULL;
-	}
-#else
-
-#ifdef HAVE_DLFCN_H
-#include <dlfcn.h>
-#endif
-
-/* Part of the hack in "dlfcn_load" ... */
-#define DSO_MAX_TRANSLATED_SIZE 256
-
-static int dlfcn_load(DSO *dso);
-static int dlfcn_unload(DSO *dso);
-static void *dlfcn_bind_var(DSO *dso, const char *symname);
-static DSO_FUNC_TYPE dlfcn_bind_func(DSO *dso, const char *symname);
-#if 0
-static int dlfcn_unbind(DSO *dso, char *symname, void *symptr);
-static int dlfcn_init(DSO *dso);
-static int dlfcn_finish(DSO *dso);
-static long dlfcn_ctrl(DSO *dso, int cmd, long larg, void *parg);
-#endif
-static char *dlfcn_name_converter(DSO *dso, const char *filename);
-static char *dlfcn_merger(DSO *dso, const char *filespec1,
-	const char *filespec2);
-
-static DSO_METHOD dso_meth_dlfcn = {
-	"OpenSSL 'dlfcn' shared library method",
-	dlfcn_load,
-	dlfcn_unload,
-	dlfcn_bind_var,
-	dlfcn_bind_func,
-/* For now, "unbind" doesn't exist */
-#if 0
-	NULL, /* unbind_var */
-	NULL, /* unbind_func */
-#endif
-	NULL, /* ctrl */
-	dlfcn_name_converter,
-	dlfcn_merger,
-	NULL, /* init */
-	NULL  /* finish */
-	};
-
-DSO_METHOD *DSO_METHOD_dlfcn(void)
-	{
-	return(&dso_meth_dlfcn);
-	}
-
-/* Prior to using the dlopen() function, we should decide on the flag
- * we send. There's a few different ways of doing this and it's a
- * messy venn-diagram to match up which platforms support what. So
- * as we don't have autoconf yet, I'm implementing a hack that could
- * be hacked further relatively easily to deal with cases as we find
- * them. Initially this is to cope with OpenBSD. */
-#if defined(__OpenBSD__) || defined(__NetBSD__)
-#	ifdef DL_LAZY
-#		define DLOPEN_FLAG DL_LAZY
-#	else
-#		ifdef RTLD_NOW
-#			define DLOPEN_FLAG RTLD_NOW
-#		else
-#			define DLOPEN_FLAG 0
-#		endif
-#	endif
-#else
-#	ifdef OPENSSL_SYS_SUNOS
-#		define DLOPEN_FLAG 1
-#	else
-#		define DLOPEN_FLAG RTLD_NOW /* Hope this works everywhere else */
-#	endif
-#endif
-
-/* For this DSO_METHOD, our meth_data STACK will contain;
- * (i) the handle (void*) returned from dlopen().
- */
-
-static int dlfcn_load(DSO *dso)
-	{
-	void *ptr = NULL;
-	/* See applicable comments in dso_dl.c */
-	char *filename = DSO_convert_filename(dso, NULL);
-	int flags = DLOPEN_FLAG;
-
-	if(filename == NULL)
-		{
-		DSOerr(DSO_F_DLFCN_LOAD,DSO_R_NO_FILENAME);
-		goto err;
-		}
-
-#ifdef RTLD_GLOBAL
-	if (dso->flags & DSO_FLAG_GLOBAL_SYMBOLS)
-		flags |= RTLD_GLOBAL;
-#endif
-	ptr = dlopen(filename, flags);
-	if(ptr == NULL)
-		{
-		DSOerr(DSO_F_DLFCN_LOAD,DSO_R_LOAD_FAILED);
-		ERR_add_error_data(4, "filename(", filename, "): ", dlerror());
-		goto err;
-		}
-	if(!sk_push(dso->meth_data, (char *)ptr))
-		{
-		DSOerr(DSO_F_DLFCN_LOAD,DSO_R_STACK_ERROR);
-		goto err;
-		}
-	/* Success */
-	dso->loaded_filename = filename;
-	return(1);
-err:
-	/* Cleanup! */
-	if(filename != NULL)
-		OPENSSL_free(filename);
-	if(ptr != NULL)
-		dlclose(ptr);
-	return(0);
-}
-
-static int dlfcn_unload(DSO *dso)
-	{
-	void *ptr;
-	if(dso == NULL)
-		{
-		DSOerr(DSO_F_DLFCN_UNLOAD,ERR_R_PASSED_NULL_PARAMETER);
-		return(0);
-		}
-	if(sk_num(dso->meth_data) < 1)
-		return(1);
-	ptr = (void *)sk_pop(dso->meth_data);
-	if(ptr == NULL)
-		{
-		DSOerr(DSO_F_DLFCN_UNLOAD,DSO_R_NULL_HANDLE);
-		/* Should push the value back onto the stack in
-		 * case of a retry. */
-		sk_push(dso->meth_data, (char *)ptr);
-		return(0);
-		}
-	/* For now I'm not aware of any errors associated with dlclose() */
-	dlclose(ptr);
-	return(1);
-	}
-
-static void *dlfcn_bind_var(DSO *dso, const char *symname)
-	{
-	void *ptr, *sym;
-
-	if((dso == NULL) || (symname == NULL))
-		{
-		DSOerr(DSO_F_DLFCN_BIND_VAR,ERR_R_PASSED_NULL_PARAMETER);
-		return(NULL);
-		}
-	if(sk_num(dso->meth_data) < 1)
-		{
-		DSOerr(DSO_F_DLFCN_BIND_VAR,DSO_R_STACK_ERROR);
-		return(NULL);
-		}
-	ptr = (void *)sk_value(dso->meth_data, sk_num(dso->meth_data) - 1);
-	if(ptr == NULL)
-		{
-		DSOerr(DSO_F_DLFCN_BIND_VAR,DSO_R_NULL_HANDLE);
-		return(NULL);
-		}
-	sym = dlsym(ptr, symname);
-	if(sym == NULL)
-		{
-		DSOerr(DSO_F_DLFCN_BIND_VAR,DSO_R_SYM_FAILURE);
-		ERR_add_error_data(4, "symname(", symname, "): ", dlerror());
-		return(NULL);
-		}
-	return(sym);
-	}
-
-static DSO_FUNC_TYPE dlfcn_bind_func(DSO *dso, const char *symname)
-	{
-	void *ptr;
-	DSO_FUNC_TYPE sym, *tsym = &sym;
-
-	if((dso == NULL) || (symname == NULL))
-		{
-		DSOerr(DSO_F_DLFCN_BIND_FUNC,ERR_R_PASSED_NULL_PARAMETER);
-		return(NULL);
-		}
-	if(sk_num(dso->meth_data) < 1)
-		{
-		DSOerr(DSO_F_DLFCN_BIND_FUNC,DSO_R_STACK_ERROR);
-		return(NULL);
-		}
-	ptr = (void *)sk_value(dso->meth_data, sk_num(dso->meth_data) - 1);
-	if(ptr == NULL)
-		{
-		DSOerr(DSO_F_DLFCN_BIND_FUNC,DSO_R_NULL_HANDLE);
-		return(NULL);
-		}
-	*(void **)(tsym) = dlsym(ptr, symname);
-	if(sym == NULL)
-		{
-		DSOerr(DSO_F_DLFCN_BIND_FUNC,DSO_R_SYM_FAILURE);
-		ERR_add_error_data(4, "symname(", symname, "): ", dlerror());
-		return(NULL);
-		}
-	return(sym);
-	}
-
-static char *dlfcn_merger(DSO *dso, const char *filespec1,
-	const char *filespec2)
-	{
-	char *merged;
-
-	if(!filespec1 && !filespec2)
-		{
-		DSOerr(DSO_F_DLFCN_MERGER,
-				ERR_R_PASSED_NULL_PARAMETER);
-		return(NULL);
-		}
-	/* If the first file specification is a rooted path, it rules.
-	   same goes if the second file specification is missing. */
-	if (!filespec2 || filespec1[0] == '/')
-		{
-		merged = OPENSSL_malloc(strlen(filespec1) + 1);
-		if(!merged)
-			{
-			DSOerr(DSO_F_DLFCN_MERGER,
-				ERR_R_MALLOC_FAILURE);
-			return(NULL);
-			}
-		strcpy(merged, filespec1);
-		}
-	/* If the first file specification is missing, the second one rules. */
-	else if (!filespec1)
-		{
-		merged = OPENSSL_malloc(strlen(filespec2) + 1);
-		if(!merged)
-			{
-			DSOerr(DSO_F_DLFCN_MERGER,
-				ERR_R_MALLOC_FAILURE);
-			return(NULL);
-			}
-		strcpy(merged, filespec2);
-		}
-	else
-		/* This part isn't as trivial as it looks.  It assumes that
-		   the second file specification really is a directory, and
-		   makes no checks whatsoever.  Therefore, the result becomes
-		   the concatenation of filespec2 followed by a slash followed
-		   by filespec1. */
-		{
-		int spec2len, len;
-
-		spec2len = (filespec2 ? strlen(filespec2) : 0);
-		len = spec2len + (filespec1 ? strlen(filespec1) : 0);
-
-		if(filespec2 && filespec2[spec2len - 1] == '/')
-			{
-			spec2len--;
-			len--;
-			}
-		merged = OPENSSL_malloc(len + 2);
-		if(!merged)
-			{
-			DSOerr(DSO_F_DLFCN_MERGER,
-				ERR_R_MALLOC_FAILURE);
-			return(NULL);
-			}
-		strcpy(merged, filespec2);
-		merged[spec2len] = '/';
-		strcpy(&merged[spec2len + 1], filespec1);
-		}
-	return(merged);
-	}
-
-static char *dlfcn_name_converter(DSO *dso, const char *filename)
-	{
-	char *translated;
-	int len, rsize, transform;
-
-	len = strlen(filename);
-	rsize = len + 1;
-	transform = (strstr(filename, "/") == NULL);
-	if(transform)
-		{
-		/* We will convert this to "%s.so" or "lib%s.so" */
-		rsize += 3;	/* The length of ".so" */
-		if ((DSO_flags(dso) & DSO_FLAG_NAME_TRANSLATION_EXT_ONLY) == 0)
-			rsize += 3; /* The length of "lib" */
-		}
-	translated = OPENSSL_malloc(rsize);
-	if(translated == NULL)
-		{
-		DSOerr(DSO_F_DLFCN_NAME_CONVERTER,
-				DSO_R_NAME_TRANSLATION_FAILED);
-		return(NULL);
-		}
-	if(transform)
-		{
-		if ((DSO_flags(dso) & DSO_FLAG_NAME_TRANSLATION_EXT_ONLY) == 0)
-			sprintf(translated, "lib%s.so", filename);
-		else
-			sprintf(translated, "%s.so", filename);
-		}
-	else
-		sprintf(translated, "%s", filename);
-	return(translated);
-	}
-
-#endif /* DSO_DLFCN */
diff --git a/crypto/openssl/crypto/dso/dso_err.c b/crypto/openssl/crypto/dso/dso_err.c
deleted file mode 100644
index a8b0a210de43..000000000000
--- a/crypto/openssl/crypto/dso/dso_err.c
+++ /dev/null
@@ -1,147 +0,0 @@
-/* crypto/dso/dso_err.c */
-/* ====================================================================
- * Copyright (c) 1999-2005 The OpenSSL Project.  All rights reserved.
- *
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions
- * are met:
- *
- * 1. Redistributions of source code must retain the above copyright
- *    notice, this list of conditions and the following disclaimer. 
- *
- * 2. Redistributions in binary form must reproduce the above copyright
- *    notice, this list of conditions and the following disclaimer in
- *    the documentation and/or other materials provided with the
- *    distribution.
- *
- * 3. All advertising materials mentioning features or use of this
- *    software must display the following acknowledgment:
- *    "This product includes software developed by the OpenSSL Project
- *    for use in the OpenSSL Toolkit. (http://www.OpenSSL.org/)"
- *
- * 4. The names "OpenSSL Toolkit" and "OpenSSL Project" must not be used to
- *    endorse or promote products derived from this software without
- *    prior written permission. For written permission, please contact
- *    openssl-core@OpenSSL.org.
- *
- * 5. Products derived from this software may not be called "OpenSSL"
- *    nor may "OpenSSL" appear in their names without prior written
- *    permission of the OpenSSL Project.
- *
- * 6. Redistributions of any form whatsoever must retain the following
- *    acknowledgment:
- *    "This product includes software developed by the OpenSSL Project
- *    for use in the OpenSSL Toolkit (http://www.OpenSSL.org/)"
- *
- * THIS SOFTWARE IS PROVIDED BY THE OpenSSL PROJECT ``AS IS'' AND ANY
- * EXPRESSED OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
- * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR
- * PURPOSE ARE DISCLAIMED.  IN NO EVENT SHALL THE OpenSSL PROJECT OR
- * ITS CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
- * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
- * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
- * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
- * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
- * STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
- * ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED
- * OF THE POSSIBILITY OF SUCH DAMAGE.
- * ====================================================================
- *
- * This product includes cryptographic software written by Eric Young
- * (eay@cryptsoft.com).  This product includes software written by Tim
- * Hudson (tjh@cryptsoft.com).
- *
- */
-
-/* NOTE: this file was auto generated by the mkerr.pl script: any changes
- * made to it will be overwritten when the script next updates this file,
- * only reason strings will be preserved.
- */
-
-#include <stdio.h>
-#include <openssl/err.h>
-#include <openssl/dso.h>
-
-/* BEGIN ERROR CODES */
-#ifndef OPENSSL_NO_ERR
-
-#define ERR_FUNC(func) ERR_PACK(ERR_LIB_DSO,func,0)
-#define ERR_REASON(reason) ERR_PACK(ERR_LIB_DSO,0,reason)
-
-static ERR_STRING_DATA DSO_str_functs[]=
-	{
-{ERR_FUNC(DSO_F_DLFCN_BIND_FUNC),	"DLFCN_BIND_FUNC"},
-{ERR_FUNC(DSO_F_DLFCN_BIND_VAR),	"DLFCN_BIND_VAR"},
-{ERR_FUNC(DSO_F_DLFCN_LOAD),	"DLFCN_LOAD"},
-{ERR_FUNC(DSO_F_DLFCN_MERGER),	"DLFCN_MERGER"},
-{ERR_FUNC(DSO_F_DLFCN_NAME_CONVERTER),	"DLFCN_NAME_CONVERTER"},
-{ERR_FUNC(DSO_F_DLFCN_UNLOAD),	"DLFCN_UNLOAD"},
-{ERR_FUNC(DSO_F_DL_BIND_FUNC),	"DL_BIND_FUNC"},
-{ERR_FUNC(DSO_F_DL_BIND_VAR),	"DL_BIND_VAR"},
-{ERR_FUNC(DSO_F_DL_LOAD),	"DL_LOAD"},
-{ERR_FUNC(DSO_F_DL_MERGER),	"DL_MERGER"},
-{ERR_FUNC(DSO_F_DL_NAME_CONVERTER),	"DL_NAME_CONVERTER"},
-{ERR_FUNC(DSO_F_DL_UNLOAD),	"DL_UNLOAD"},
-{ERR_FUNC(DSO_F_DSO_BIND_FUNC),	"DSO_bind_func"},
-{ERR_FUNC(DSO_F_DSO_BIND_VAR),	"DSO_bind_var"},
-{ERR_FUNC(DSO_F_DSO_CONVERT_FILENAME),	"DSO_convert_filename"},
-{ERR_FUNC(DSO_F_DSO_CTRL),	"DSO_ctrl"},
-{ERR_FUNC(DSO_F_DSO_FREE),	"DSO_free"},
-{ERR_FUNC(DSO_F_DSO_GET_FILENAME),	"DSO_get_filename"},
-{ERR_FUNC(DSO_F_DSO_GET_LOADED_FILENAME),	"DSO_get_loaded_filename"},
-{ERR_FUNC(DSO_F_DSO_LOAD),	"DSO_load"},
-{ERR_FUNC(DSO_F_DSO_MERGE),	"DSO_merge"},
-{ERR_FUNC(DSO_F_DSO_NEW_METHOD),	"DSO_new_method"},
-{ERR_FUNC(DSO_F_DSO_SET_FILENAME),	"DSO_set_filename"},
-{ERR_FUNC(DSO_F_DSO_SET_NAME_CONVERTER),	"DSO_set_name_converter"},
-{ERR_FUNC(DSO_F_DSO_UP_REF),	"DSO_up_ref"},
-{ERR_FUNC(DSO_F_VMS_BIND_SYM),	"VMS_BIND_SYM"},
-{ERR_FUNC(DSO_F_VMS_LOAD),	"VMS_LOAD"},
-{ERR_FUNC(DSO_F_VMS_MERGER),	"VMS_MERGER"},
-{ERR_FUNC(DSO_F_VMS_UNLOAD),	"VMS_UNLOAD"},
-{ERR_FUNC(DSO_F_WIN32_BIND_FUNC),	"WIN32_BIND_FUNC"},
-{ERR_FUNC(DSO_F_WIN32_BIND_VAR),	"WIN32_BIND_VAR"},
-{ERR_FUNC(DSO_F_WIN32_JOINER),	"WIN32_JOINER"},
-{ERR_FUNC(DSO_F_WIN32_LOAD),	"WIN32_LOAD"},
-{ERR_FUNC(DSO_F_WIN32_MERGER),	"WIN32_MERGER"},
-{ERR_FUNC(DSO_F_WIN32_NAME_CONVERTER),	"WIN32_NAME_CONVERTER"},
-{ERR_FUNC(DSO_F_WIN32_SPLITTER),	"WIN32_SPLITTER"},
-{ERR_FUNC(DSO_F_WIN32_UNLOAD),	"WIN32_UNLOAD"},
-{0,NULL}
-	};
-
-static ERR_STRING_DATA DSO_str_reasons[]=
-	{
-{ERR_REASON(DSO_R_CTRL_FAILED)           ,"control command failed"},
-{ERR_REASON(DSO_R_DSO_ALREADY_LOADED)    ,"dso already loaded"},
-{ERR_REASON(DSO_R_EMPTY_FILE_STRUCTURE)  ,"empty file structure"},
-{ERR_REASON(DSO_R_FAILURE)               ,"failure"},
-{ERR_REASON(DSO_R_FILENAME_TOO_BIG)      ,"filename too big"},
-{ERR_REASON(DSO_R_FINISH_FAILED)         ,"cleanup method function failed"},
-{ERR_REASON(DSO_R_INCORRECT_FILE_SYNTAX) ,"incorrect file syntax"},
-{ERR_REASON(DSO_R_LOAD_FAILED)           ,"could not load the shared library"},
-{ERR_REASON(DSO_R_NAME_TRANSLATION_FAILED),"name translation failed"},
-{ERR_REASON(DSO_R_NO_FILENAME)           ,"no filename"},
-{ERR_REASON(DSO_R_NO_FILE_SPECIFICATION) ,"no file specification"},
-{ERR_REASON(DSO_R_NULL_HANDLE)           ,"a null shared library handle was used"},
-{ERR_REASON(DSO_R_SET_FILENAME_FAILED)   ,"set filename failed"},
-{ERR_REASON(DSO_R_STACK_ERROR)           ,"the meth_data stack is corrupt"},
-{ERR_REASON(DSO_R_SYM_FAILURE)           ,"could not bind to the requested symbol name"},
-{ERR_REASON(DSO_R_UNLOAD_FAILED)         ,"could not unload the shared library"},
-{ERR_REASON(DSO_R_UNSUPPORTED)           ,"functionality not supported"},
-{0,NULL}
-	};
-
-#endif
-
-void ERR_load_DSO_strings(void)
-	{
-#ifndef OPENSSL_NO_ERR
-
-	if (ERR_func_error_string(DSO_str_functs[0].error) == NULL)
-		{
-		ERR_load_strings(0,DSO_str_functs);
-		ERR_load_strings(0,DSO_str_reasons);
-		}
-#endif
-	}
diff --git a/crypto/openssl/crypto/dso/dso_lib.c b/crypto/openssl/crypto/dso/dso_lib.c
deleted file mode 100644
index 49bdd7130976..000000000000
--- a/crypto/openssl/crypto/dso/dso_lib.c
+++ /dev/null
@@ -1,466 +0,0 @@
-/* dso_lib.c -*- mode:C; c-file-style: "eay" -*- */
-/* Written by Geoff Thorpe (geoff@geoffthorpe.net) for the OpenSSL
- * project 2000.
- */
-/* ====================================================================
- * Copyright (c) 2000 The OpenSSL Project.  All rights reserved.
- *
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions
- * are met:
- *
- * 1. Redistributions of source code must retain the above copyright
- *    notice, this list of conditions and the following disclaimer. 
- *
- * 2. Redistributions in binary form must reproduce the above copyright
- *    notice, this list of conditions and the following disclaimer in
- *    the documentation and/or other materials provided with the
- *    distribution.
- *
- * 3. All advertising materials mentioning features or use of this
- *    software must display the following acknowledgment:
- *    "This product includes software developed by the OpenSSL Project
- *    for use in the OpenSSL Toolkit. (http://www.OpenSSL.org/)"
- *
- * 4. The names "OpenSSL Toolkit" and "OpenSSL Project" must not be used to
- *    endorse or promote products derived from this software without
- *    prior written permission. For written permission, please contact
- *    licensing@OpenSSL.org.
- *
- * 5. Products derived from this software may not be called "OpenSSL"
- *    nor may "OpenSSL" appear in their names without prior written
- *    permission of the OpenSSL Project.
- *
- * 6. Redistributions of any form whatsoever must retain the following
- *    acknowledgment:
- *    "This product includes software developed by the OpenSSL Project
- *    for use in the OpenSSL Toolkit (http://www.OpenSSL.org/)"
- *
- * THIS SOFTWARE IS PROVIDED BY THE OpenSSL PROJECT ``AS IS'' AND ANY
- * EXPRESSED OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
- * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR
- * PURPOSE ARE DISCLAIMED.  IN NO EVENT SHALL THE OpenSSL PROJECT OR
- * ITS CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
- * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
- * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
- * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
- * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
- * STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
- * ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED
- * OF THE POSSIBILITY OF SUCH DAMAGE.
- * ====================================================================
- *
- * This product includes cryptographic software written by Eric Young
- * (eay@cryptsoft.com).  This product includes software written by Tim
- * Hudson (tjh@cryptsoft.com).
- *
- */
-
-#include <stdio.h>
-#include <openssl/crypto.h>
-#include "cryptlib.h"
-#include <openssl/dso.h>
-
-static DSO_METHOD *default_DSO_meth = NULL;
-
-DSO *DSO_new(void)
-	{
-	return(DSO_new_method(NULL));
-	}
-
-void DSO_set_default_method(DSO_METHOD *meth)
-	{
-	default_DSO_meth = meth;
-	}
-
-DSO_METHOD *DSO_get_default_method(void)
-	{
-	return(default_DSO_meth);
-	}
-
-DSO_METHOD *DSO_get_method(DSO *dso)
-	{
-	return(dso->meth);
-	}
-
-DSO_METHOD *DSO_set_method(DSO *dso, DSO_METHOD *meth)
-	{
-	DSO_METHOD *mtmp;
-	mtmp = dso->meth;
-	dso->meth = meth;
-	return(mtmp);
-	}
-
-DSO *DSO_new_method(DSO_METHOD *meth)
-	{
-	DSO *ret;
-
-	if(default_DSO_meth == NULL)
-		/* We default to DSO_METH_openssl() which in turn defaults
-		 * to stealing the "best available" method. Will fallback
-		 * to DSO_METH_null() in the worst case. */
-		default_DSO_meth = DSO_METHOD_openssl();
-	ret = (DSO *)OPENSSL_malloc(sizeof(DSO));
-	if(ret == NULL)
-		{
-		DSOerr(DSO_F_DSO_NEW_METHOD,ERR_R_MALLOC_FAILURE);
-		return(NULL);
-		}
-	memset(ret, 0, sizeof(DSO));
-	ret->meth_data = sk_new_null();
-	if(ret->meth_data == NULL)
-		{
-		/* sk_new doesn't generate any errors so we do */
-		DSOerr(DSO_F_DSO_NEW_METHOD,ERR_R_MALLOC_FAILURE);
-		OPENSSL_free(ret);
-		return(NULL);
-		}
-	if(meth == NULL)
-		ret->meth = default_DSO_meth;
-	else
-		ret->meth = meth;
-	ret->references = 1;
-	if((ret->meth->init != NULL) && !ret->meth->init(ret))
-		{
-		OPENSSL_free(ret);
-		ret=NULL;
-		}
-	return(ret);
-	}
-
-int DSO_free(DSO *dso)
-	{
-        int i;
- 
-	if(dso == NULL)
-		{
-		DSOerr(DSO_F_DSO_FREE,ERR_R_PASSED_NULL_PARAMETER);
-		return(0);
-		}
- 
-	i=CRYPTO_add(&dso->references,-1,CRYPTO_LOCK_DSO);
-#ifdef REF_PRINT
-	REF_PRINT("DSO",dso);
-#endif
-	if(i > 0) return(1);
-#ifdef REF_CHECK
-	if(i < 0)
-		{
-		fprintf(stderr,"DSO_free, bad reference count\n");
-		abort();
-		}
-#endif
-
-	if((dso->meth->dso_unload != NULL) && !dso->meth->dso_unload(dso))
-		{
-		DSOerr(DSO_F_DSO_FREE,DSO_R_UNLOAD_FAILED);
-		return(0);
-		}
- 
-	if((dso->meth->finish != NULL) && !dso->meth->finish(dso))
-		{
-		DSOerr(DSO_F_DSO_FREE,DSO_R_FINISH_FAILED);
-		return(0);
-		}
-	
-	sk_free(dso->meth_data);
-	if(dso->filename != NULL)
-		OPENSSL_free(dso->filename);
-	if(dso->loaded_filename != NULL)
-		OPENSSL_free(dso->loaded_filename);
- 
-	OPENSSL_free(dso);
-	return(1);
-	}
-
-int DSO_flags(DSO *dso)
-	{
-	return((dso == NULL) ? 0 : dso->flags);
-	}
-
-
-int DSO_up_ref(DSO *dso)
-	{
-	if (dso == NULL)
-		{
-		DSOerr(DSO_F_DSO_UP_REF,ERR_R_PASSED_NULL_PARAMETER);
-		return(0);
-		}
-
-	CRYPTO_add(&dso->references,1,CRYPTO_LOCK_DSO);
-	return(1);
-	}
-
-DSO *DSO_load(DSO *dso, const char *filename, DSO_METHOD *meth, int flags)
-	{
-	DSO *ret;
-	int allocated = 0;
-
-	if(dso == NULL)
-		{
-		ret = DSO_new_method(meth);
-		if(ret == NULL)
-			{
-			DSOerr(DSO_F_DSO_LOAD,ERR_R_MALLOC_FAILURE);
-			goto err;
-			}
-		allocated = 1;
-		/* Pass the provided flags to the new DSO object */
-		if(DSO_ctrl(ret, DSO_CTRL_SET_FLAGS, flags, NULL) < 0)
-			{
-			DSOerr(DSO_F_DSO_LOAD,DSO_R_CTRL_FAILED);
-			goto err;
-			}
-		}
-	else
-		ret = dso;
-	/* Don't load if we're currently already loaded */
-	if(ret->filename != NULL)
-		{
-		DSOerr(DSO_F_DSO_LOAD,DSO_R_DSO_ALREADY_LOADED);
-		goto err;
-		}
-	/* filename can only be NULL if we were passed a dso that already has
-	 * one set. */
-	if(filename != NULL)
-		if(!DSO_set_filename(ret, filename))
-			{
-			DSOerr(DSO_F_DSO_LOAD,DSO_R_SET_FILENAME_FAILED);
-			goto err;
-			}
-	filename = ret->filename;
-	if(filename == NULL)
-		{
-		DSOerr(DSO_F_DSO_LOAD,DSO_R_NO_FILENAME);
-		goto err;
-		}
-	if(ret->meth->dso_load == NULL)
-		{
-		DSOerr(DSO_F_DSO_LOAD,DSO_R_UNSUPPORTED);
-		goto err;
-		}
-	if(!ret->meth->dso_load(ret))
-		{
-		DSOerr(DSO_F_DSO_LOAD,DSO_R_LOAD_FAILED);
-		goto err;
-		}
-	/* Load succeeded */
-	return(ret);
-err:
-	if(allocated)
-		DSO_free(ret);
-	return(NULL);
-	}
-
-void *DSO_bind_var(DSO *dso, const char *symname)
-	{
-	void *ret = NULL;
-
-	if((dso == NULL) || (symname == NULL))
-		{
-		DSOerr(DSO_F_DSO_BIND_VAR,ERR_R_PASSED_NULL_PARAMETER);
-		return(NULL);
-		}
-	if(dso->meth->dso_bind_var == NULL)
-		{
-		DSOerr(DSO_F_DSO_BIND_VAR,DSO_R_UNSUPPORTED);
-		return(NULL);
-		}
-	if((ret = dso->meth->dso_bind_var(dso, symname)) == NULL)
-		{
-		DSOerr(DSO_F_DSO_BIND_VAR,DSO_R_SYM_FAILURE);
-		return(NULL);
-		}
-	/* Success */
-	return(ret);
-	}
-
-DSO_FUNC_TYPE DSO_bind_func(DSO *dso, const char *symname)
-	{
-	DSO_FUNC_TYPE ret = NULL;
-
-	if((dso == NULL) || (symname == NULL))
-		{
-		DSOerr(DSO_F_DSO_BIND_FUNC,ERR_R_PASSED_NULL_PARAMETER);
-		return(NULL);
-		}
-	if(dso->meth->dso_bind_func == NULL)
-		{
-		DSOerr(DSO_F_DSO_BIND_FUNC,DSO_R_UNSUPPORTED);
-		return(NULL);
-		}
-	if((ret = dso->meth->dso_bind_func(dso, symname)) == NULL)
-		{
-		DSOerr(DSO_F_DSO_BIND_FUNC,DSO_R_SYM_FAILURE);
-		return(NULL);
-		}
-	/* Success */
-	return(ret);
-	}
-
-/* I don't really like these *_ctrl functions very much to be perfectly
- * honest. For one thing, I think I have to return a negative value for
- * any error because possible DSO_ctrl() commands may return values
- * such as "size"s that can legitimately be zero (making the standard
- * "if(DSO_cmd(...))" form that works almost everywhere else fail at
- * odd times. I'd prefer "output" values to be passed by reference and
- * the return value as success/failure like usual ... but we conform
- * when we must... :-) */
-long DSO_ctrl(DSO *dso, int cmd, long larg, void *parg)
-	{
-	if(dso == NULL)
-		{
-		DSOerr(DSO_F_DSO_CTRL,ERR_R_PASSED_NULL_PARAMETER);
-		return(-1);
-		}
-	/* We should intercept certain generic commands and only pass control
-	 * to the method-specific ctrl() function if it's something we don't
-	 * handle. */
-	switch(cmd)
-		{
-	case DSO_CTRL_GET_FLAGS:
-		return dso->flags;
-	case DSO_CTRL_SET_FLAGS:
-		dso->flags = (int)larg;
-		return(0);
-	case DSO_CTRL_OR_FLAGS:
-		dso->flags |= (int)larg;
-		return(0);
-	default:
-		break;
-		}
-	if((dso->meth == NULL) || (dso->meth->dso_ctrl == NULL))
-		{
-		DSOerr(DSO_F_DSO_CTRL,DSO_R_UNSUPPORTED);
-		return(-1);
-		}
-	return(dso->meth->dso_ctrl(dso,cmd,larg,parg));
-	}
-
-int DSO_set_name_converter(DSO *dso, DSO_NAME_CONVERTER_FUNC cb,
-			DSO_NAME_CONVERTER_FUNC *oldcb)
-	{
-	if(dso == NULL)
-		{
-		DSOerr(DSO_F_DSO_SET_NAME_CONVERTER,
-				ERR_R_PASSED_NULL_PARAMETER);
-		return(0);
-		}
-	if(oldcb)
-		*oldcb = dso->name_converter;
-	dso->name_converter = cb;
-	return(1);
-	}
-
-const char *DSO_get_filename(DSO *dso)
-	{
-	if(dso == NULL)
-		{
-		DSOerr(DSO_F_DSO_GET_FILENAME,ERR_R_PASSED_NULL_PARAMETER);
-		return(NULL);
-		}
-	return(dso->filename);
-	}
-
-int DSO_set_filename(DSO *dso, const char *filename)
-	{
-	char *copied;
-
-	if((dso == NULL) || (filename == NULL))
-		{
-		DSOerr(DSO_F_DSO_SET_FILENAME,ERR_R_PASSED_NULL_PARAMETER);
-		return(0);
-		}
-	if(dso->loaded_filename)
-		{
-		DSOerr(DSO_F_DSO_SET_FILENAME,DSO_R_DSO_ALREADY_LOADED);
-		return(0);
-		}
-	/* We'll duplicate filename */
-	copied = OPENSSL_malloc(strlen(filename) + 1);
-	if(copied == NULL)
-		{
-		DSOerr(DSO_F_DSO_SET_FILENAME,ERR_R_MALLOC_FAILURE);
-		return(0);
-		}
-	BUF_strlcpy(copied, filename, strlen(filename) + 1);
-	if(dso->filename)
-		OPENSSL_free(dso->filename);
-	dso->filename = copied;
-	return(1);
-	}
-
-char *DSO_merge(DSO *dso, const char *filespec1, const char *filespec2)
-	{
-	char *result = NULL;
-
-	if(dso == NULL || filespec1 == NULL)
-		{
-		DSOerr(DSO_F_DSO_MERGE,ERR_R_PASSED_NULL_PARAMETER);
-		return(NULL);
-		}
-	if(filespec1 == NULL)
-		filespec1 = dso->filename;
-	if(filespec1 == NULL)
-		{
-		DSOerr(DSO_F_DSO_MERGE,DSO_R_NO_FILE_SPECIFICATION);
-		return(NULL);
-		}
-	if((dso->flags & DSO_FLAG_NO_NAME_TRANSLATION) == 0)
-		{
-		if(dso->merger != NULL)
-			result = dso->merger(dso, filespec1, filespec2);
-		else if(dso->meth->dso_merger != NULL)
-			result = dso->meth->dso_merger(dso,
-				filespec1, filespec2);
-		}
-	return(result);
-	}
-
-char *DSO_convert_filename(DSO *dso, const char *filename)
-	{
-	char *result = NULL;
-
-	if(dso == NULL)
-		{
-		DSOerr(DSO_F_DSO_CONVERT_FILENAME,ERR_R_PASSED_NULL_PARAMETER);
-		return(NULL);
-		}
-	if(filename == NULL)
-		filename = dso->filename;
-	if(filename == NULL)
-		{
-		DSOerr(DSO_F_DSO_CONVERT_FILENAME,DSO_R_NO_FILENAME);
-		return(NULL);
-		}
-	if((dso->flags & DSO_FLAG_NO_NAME_TRANSLATION) == 0)
-		{
-		if(dso->name_converter != NULL)
-			result = dso->name_converter(dso, filename);
-		else if(dso->meth->dso_name_converter != NULL)
-			result = dso->meth->dso_name_converter(dso, filename);
-		}
-	if(result == NULL)
-		{
-		result = OPENSSL_malloc(strlen(filename) + 1);
-		if(result == NULL)
-			{
-			DSOerr(DSO_F_DSO_CONVERT_FILENAME,
-					ERR_R_MALLOC_FAILURE);
-			return(NULL);
-			}
-		BUF_strlcpy(result, filename, strlen(filename) + 1);
-		}
-	return(result);
-	}
-
-const char *DSO_get_loaded_filename(DSO *dso)
-	{
-	if(dso == NULL)
-		{
-		DSOerr(DSO_F_DSO_GET_LOADED_FILENAME,
-				ERR_R_PASSED_NULL_PARAMETER);
-		return(NULL);
-		}
-	return(dso->loaded_filename);
-	}
diff --git a/crypto/openssl/crypto/dso/dso_null.c b/crypto/openssl/crypto/dso/dso_null.c
deleted file mode 100644
index 497298465127..000000000000
--- a/crypto/openssl/crypto/dso/dso_null.c
+++ /dev/null
@@ -1,88 +0,0 @@
-/* dso_null.c */
-/* Written by Geoff Thorpe (geoff@geoffthorpe.net) for the OpenSSL
- * project 2000.
- */
-/* ====================================================================
- * Copyright (c) 2000 The OpenSSL Project.  All rights reserved.
- *
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions
- * are met:
- *
- * 1. Redistributions of source code must retain the above copyright
- *    notice, this list of conditions and the following disclaimer. 
- *
- * 2. Redistributions in binary form must reproduce the above copyright
- *    notice, this list of conditions and the following disclaimer in
- *    the documentation and/or other materials provided with the
- *    distribution.
- *
- * 3. All advertising materials mentioning features or use of this
- *    software must display the following acknowledgment:
- *    "This product includes software developed by the OpenSSL Project
- *    for use in the OpenSSL Toolkit. (http://www.OpenSSL.org/)"
- *
- * 4. The names "OpenSSL Toolkit" and "OpenSSL Project" must not be used to
- *    endorse or promote products derived from this software without
- *    prior written permission. For written permission, please contact
- *    licensing@OpenSSL.org.
- *
- * 5. Products derived from this software may not be called "OpenSSL"
- *    nor may "OpenSSL" appear in their names without prior written
- *    permission of the OpenSSL Project.
- *
- * 6. Redistributions of any form whatsoever must retain the following
- *    acknowledgment:
- *    "This product includes software developed by the OpenSSL Project
- *    for use in the OpenSSL Toolkit (http://www.OpenSSL.org/)"
- *
- * THIS SOFTWARE IS PROVIDED BY THE OpenSSL PROJECT ``AS IS'' AND ANY
- * EXPRESSED OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
- * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR
- * PURPOSE ARE DISCLAIMED.  IN NO EVENT SHALL THE OpenSSL PROJECT OR
- * ITS CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
- * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
- * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
- * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
- * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
- * STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
- * ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED
- * OF THE POSSIBILITY OF SUCH DAMAGE.
- * ====================================================================
- *
- * This product includes cryptographic software written by Eric Young
- * (eay@cryptsoft.com).  This product includes software written by Tim
- * Hudson (tjh@cryptsoft.com).
- *
- */
-
-/* This "NULL" method is provided as the fallback for systems that have
- * no appropriate support for "shared-libraries". */
-
-#include <stdio.h>
-#include "cryptlib.h"
-#include <openssl/dso.h>
-
-static DSO_METHOD dso_meth_null = {
-	"NULL shared library method",
-	NULL, /* load */
-	NULL, /* unload */
-	NULL, /* bind_var */
-	NULL, /* bind_func */
-/* For now, "unbind" doesn't exist */
-#if 0
-	NULL, /* unbind_var */
-	NULL, /* unbind_func */
-#endif
-	NULL, /* ctrl */
-	NULL, /* dso_name_converter */
-	NULL, /* dso_merger */
-	NULL, /* init */
-	NULL  /* finish */
-	};
-
-DSO_METHOD *DSO_METHOD_null(void)
-	{
-	return(&dso_meth_null);
-	}
-
diff --git a/crypto/openssl/crypto/dso/dso_openssl.c b/crypto/openssl/crypto/dso/dso_openssl.c
deleted file mode 100644
index a4395ebffeca..000000000000
--- a/crypto/openssl/crypto/dso/dso_openssl.c
+++ /dev/null
@@ -1,81 +0,0 @@
-/* dso_openssl.c */
-/* Written by Geoff Thorpe (geoff@geoffthorpe.net) for the OpenSSL
- * project 2000.
- */
-/* ====================================================================
- * Copyright (c) 2000 The OpenSSL Project.  All rights reserved.
- *
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions
- * are met:
- *
- * 1. Redistributions of source code must retain the above copyright
- *    notice, this list of conditions and the following disclaimer. 
- *
- * 2. Redistributions in binary form must reproduce the above copyright
- *    notice, this list of conditions and the following disclaimer in
- *    the documentation and/or other materials provided with the
- *    distribution.
- *
- * 3. All advertising materials mentioning features or use of this
- *    software must display the following acknowledgment:
- *    "This product includes software developed by the OpenSSL Project
- *    for use in the OpenSSL Toolkit. (http://www.OpenSSL.org/)"
- *
- * 4. The names "OpenSSL Toolkit" and "OpenSSL Project" must not be used to
- *    endorse or promote products derived from this software without
- *    prior written permission. For written permission, please contact
- *    licensing@OpenSSL.org.
- *
- * 5. Products derived from this software may not be called "OpenSSL"
- *    nor may "OpenSSL" appear in their names without prior written
- *    permission of the OpenSSL Project.
- *
- * 6. Redistributions of any form whatsoever must retain the following
- *    acknowledgment:
- *    "This product includes software developed by the OpenSSL Project
- *    for use in the OpenSSL Toolkit (http://www.OpenSSL.org/)"
- *
- * THIS SOFTWARE IS PROVIDED BY THE OpenSSL PROJECT ``AS IS'' AND ANY
- * EXPRESSED OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
- * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR
- * PURPOSE ARE DISCLAIMED.  IN NO EVENT SHALL THE OpenSSL PROJECT OR
- * ITS CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
- * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
- * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
- * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
- * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
- * STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
- * ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED
- * OF THE POSSIBILITY OF SUCH DAMAGE.
- * ====================================================================
- *
- * This product includes cryptographic software written by Eric Young
- * (eay@cryptsoft.com).  This product includes software written by Tim
- * Hudson (tjh@cryptsoft.com).
- *
- */
-
-#include <stdio.h>
-#include "cryptlib.h"
-#include <openssl/dso.h>
-
-/* We just pinch the method from an appropriate "default" method. */
-
-DSO_METHOD *DSO_METHOD_openssl(void)
-	{
-#ifdef DEF_DSO_METHOD
-	return(DEF_DSO_METHOD());
-#elif defined(DSO_DLFCN)
-	return(DSO_METHOD_dlfcn());
-#elif defined(DSO_DL)
-	return(DSO_METHOD_dl());
-#elif defined(DSO_WIN32)
-	return(DSO_METHOD_win32());
-#elif defined(DSO_VMS)
-	return(DSO_METHOD_vms());
-#else
-	return(DSO_METHOD_null());
-#endif
-	}
-
diff --git a/crypto/openssl/crypto/ebcdic.c b/crypto/openssl/crypto/ebcdic.c
deleted file mode 100644
index 43e53bcaf7d9..000000000000
--- a/crypto/openssl/crypto/ebcdic.c
+++ /dev/null
@@ -1,221 +0,0 @@
-/* crypto/ebcdic.c */
-
-#ifndef CHARSET_EBCDIC
-
-#include <openssl/e_os2.h>
-#if defined(PEDANTIC) || defined(__DECC) || defined(OPENSSL_SYS_MACOSX)
-static void *dummy=&dummy;
-#endif
-
-#else /*CHARSET_EBCDIC*/
-
-#include "ebcdic.h"
-/*      Initial Port for  Apache-1.3     by <Martin.Kraemer@Mch.SNI.De>
- *      Adapted for       OpenSSL-0.9.4  by <Martin.Kraemer@Mch.SNI.De>
- */
-
-#ifdef _OSD_POSIX
-/*
-    "BS2000 OSD" is a POSIX subsystem on a main frame.
-    It is made by Siemens AG, Germany, for their BS2000 mainframe machines.
-    Within the POSIX subsystem, the same character set was chosen as in
-    "native BS2000", namely EBCDIC. (EDF04)
-
-    The name "ASCII" in these routines is misleading: actually, conversion
-    is not between EBCDIC and ASCII, but EBCDIC(EDF04) and ISO-8859.1;
-    that means that (western european) national characters are preserved.
-
-    This table is identical to the one used by rsh/rcp/ftp and other POSIX tools.
-*/
-
-/* Here's the bijective ebcdic-to-ascii table: */
-const unsigned char os_toascii[256] = {
-/*00*/ 0x00, 0x01, 0x02, 0x03, 0x85, 0x09, 0x86, 0x7f,
-       0x87, 0x8d, 0x8e, 0x0b, 0x0c, 0x0d, 0x0e, 0x0f, /*................*/
-/*10*/ 0x10, 0x11, 0x12, 0x13, 0x8f, 0x0a, 0x08, 0x97,
-       0x18, 0x19, 0x9c, 0x9d, 0x1c, 0x1d, 0x1e, 0x1f, /*................*/
-/*20*/ 0x80, 0x81, 0x82, 0x83, 0x84, 0x92, 0x17, 0x1b,
-       0x88, 0x89, 0x8a, 0x8b, 0x8c, 0x05, 0x06, 0x07, /*................*/
-/*30*/ 0x90, 0x91, 0x16, 0x93, 0x94, 0x95, 0x96, 0x04,
-       0x98, 0x99, 0x9a, 0x9b, 0x14, 0x15, 0x9e, 0x1a, /*................*/
-/*40*/ 0x20, 0xa0, 0xe2, 0xe4, 0xe0, 0xe1, 0xe3, 0xe5,
-       0xe7, 0xf1, 0x60, 0x2e, 0x3c, 0x28, 0x2b, 0x7c, /* .........`.<(+|*/
-/*50*/ 0x26, 0xe9, 0xea, 0xeb, 0xe8, 0xed, 0xee, 0xef,
-       0xec, 0xdf, 0x21, 0x24, 0x2a, 0x29, 0x3b, 0x9f, /*&.........!$*);.*/
-/*60*/ 0x2d, 0x2f, 0xc2, 0xc4, 0xc0, 0xc1, 0xc3, 0xc5,
-       0xc7, 0xd1, 0x5e, 0x2c, 0x25, 0x5f, 0x3e, 0x3f, /*-/........^,%_>?*/
-/*70*/ 0xf8, 0xc9, 0xca, 0xcb, 0xc8, 0xcd, 0xce, 0xcf,
-       0xcc, 0xa8, 0x3a, 0x23, 0x40, 0x27, 0x3d, 0x22, /*..........:#@'="*/
-/*80*/ 0xd8, 0x61, 0x62, 0x63, 0x64, 0x65, 0x66, 0x67,
-       0x68, 0x69, 0xab, 0xbb, 0xf0, 0xfd, 0xfe, 0xb1, /*.abcdefghi......*/
-/*90*/ 0xb0, 0x6a, 0x6b, 0x6c, 0x6d, 0x6e, 0x6f, 0x70,
-       0x71, 0x72, 0xaa, 0xba, 0xe6, 0xb8, 0xc6, 0xa4, /*.jklmnopqr......*/
-/*a0*/ 0xb5, 0xaf, 0x73, 0x74, 0x75, 0x76, 0x77, 0x78,
-       0x79, 0x7a, 0xa1, 0xbf, 0xd0, 0xdd, 0xde, 0xae, /*..stuvwxyz......*/
-/*b0*/ 0xa2, 0xa3, 0xa5, 0xb7, 0xa9, 0xa7, 0xb6, 0xbc,
-       0xbd, 0xbe, 0xac, 0x5b, 0x5c, 0x5d, 0xb4, 0xd7, /*...........[\]..*/
-/*c0*/ 0xf9, 0x41, 0x42, 0x43, 0x44, 0x45, 0x46, 0x47,
-       0x48, 0x49, 0xad, 0xf4, 0xf6, 0xf2, 0xf3, 0xf5, /*.ABCDEFGHI......*/
-/*d0*/ 0xa6, 0x4a, 0x4b, 0x4c, 0x4d, 0x4e, 0x4f, 0x50,
-       0x51, 0x52, 0xb9, 0xfb, 0xfc, 0xdb, 0xfa, 0xff, /*.JKLMNOPQR......*/
-/*e0*/ 0xd9, 0xf7, 0x53, 0x54, 0x55, 0x56, 0x57, 0x58,
-       0x59, 0x5a, 0xb2, 0xd4, 0xd6, 0xd2, 0xd3, 0xd5, /*..STUVWXYZ......*/
-/*f0*/ 0x30, 0x31, 0x32, 0x33, 0x34, 0x35, 0x36, 0x37,
-       0x38, 0x39, 0xb3, 0x7b, 0xdc, 0x7d, 0xda, 0x7e  /*0123456789.{.}.~*/
-};
-
-
-/* The ascii-to-ebcdic table: */
-const unsigned char os_toebcdic[256] = {
-/*00*/  0x00, 0x01, 0x02, 0x03, 0x37, 0x2d, 0x2e, 0x2f,
-	0x16, 0x05, 0x15, 0x0b, 0x0c, 0x0d, 0x0e, 0x0f,  /*................*/
-/*10*/  0x10, 0x11, 0x12, 0x13, 0x3c, 0x3d, 0x32, 0x26,
-	0x18, 0x19, 0x3f, 0x27, 0x1c, 0x1d, 0x1e, 0x1f,  /*................*/
-/*20*/  0x40, 0x5a, 0x7f, 0x7b, 0x5b, 0x6c, 0x50, 0x7d,
-	0x4d, 0x5d, 0x5c, 0x4e, 0x6b, 0x60, 0x4b, 0x61,  /* !"#$%&'()*+,-./ */
-/*30*/  0xf0, 0xf1, 0xf2, 0xf3, 0xf4, 0xf5, 0xf6, 0xf7,
-	0xf8, 0xf9, 0x7a, 0x5e, 0x4c, 0x7e, 0x6e, 0x6f,  /*0123456789:;<=>?*/
-/*40*/  0x7c, 0xc1, 0xc2, 0xc3, 0xc4, 0xc5, 0xc6, 0xc7,
-	0xc8, 0xc9, 0xd1, 0xd2, 0xd3, 0xd4, 0xd5, 0xd6,  /*@ABCDEFGHIJKLMNO*/
-/*50*/  0xd7, 0xd8, 0xd9, 0xe2, 0xe3, 0xe4, 0xe5, 0xe6,
-	0xe7, 0xe8, 0xe9, 0xbb, 0xbc, 0xbd, 0x6a, 0x6d,  /*PQRSTUVWXYZ[\]^_*/
-/*60*/  0x4a, 0x81, 0x82, 0x83, 0x84, 0x85, 0x86, 0x87,
-	0x88, 0x89, 0x91, 0x92, 0x93, 0x94, 0x95, 0x96,  /*`abcdefghijklmno*/
-/*70*/  0x97, 0x98, 0x99, 0xa2, 0xa3, 0xa4, 0xa5, 0xa6,
-	0xa7, 0xa8, 0xa9, 0xfb, 0x4f, 0xfd, 0xff, 0x07,  /*pqrstuvwxyz{|}~.*/
-/*80*/  0x20, 0x21, 0x22, 0x23, 0x24, 0x04, 0x06, 0x08,
-	0x28, 0x29, 0x2a, 0x2b, 0x2c, 0x09, 0x0a, 0x14,  /*................*/
-/*90*/  0x30, 0x31, 0x25, 0x33, 0x34, 0x35, 0x36, 0x17,
-	0x38, 0x39, 0x3a, 0x3b, 0x1a, 0x1b, 0x3e, 0x5f,  /*................*/
-/*a0*/  0x41, 0xaa, 0xb0, 0xb1, 0x9f, 0xb2, 0xd0, 0xb5,
-	0x79, 0xb4, 0x9a, 0x8a, 0xba, 0xca, 0xaf, 0xa1,  /*................*/
-/*b0*/  0x90, 0x8f, 0xea, 0xfa, 0xbe, 0xa0, 0xb6, 0xb3,
-	0x9d, 0xda, 0x9b, 0x8b, 0xb7, 0xb8, 0xb9, 0xab,  /*................*/
-/*c0*/  0x64, 0x65, 0x62, 0x66, 0x63, 0x67, 0x9e, 0x68,
-	0x74, 0x71, 0x72, 0x73, 0x78, 0x75, 0x76, 0x77,  /*................*/
-/*d0*/  0xac, 0x69, 0xed, 0xee, 0xeb, 0xef, 0xec, 0xbf,
-	0x80, 0xe0, 0xfe, 0xdd, 0xfc, 0xad, 0xae, 0x59,  /*................*/
-/*e0*/  0x44, 0x45, 0x42, 0x46, 0x43, 0x47, 0x9c, 0x48,
-	0x54, 0x51, 0x52, 0x53, 0x58, 0x55, 0x56, 0x57,  /*................*/
-/*f0*/  0x8c, 0x49, 0xcd, 0xce, 0xcb, 0xcf, 0xcc, 0xe1,
-	0x70, 0xc0, 0xde, 0xdb, 0xdc, 0x8d, 0x8e, 0xdf   /*................*/
-};
-
-#else  /*_OSD_POSIX*/
-
-/*
-This code does basic character mapping for IBM's TPF and OS/390 operating systems.
-It is a modified version of the BS2000 table.
-
-Bijective EBCDIC (character set IBM-1047) to US-ASCII table:
-This table is bijective - there are no ambigous or duplicate characters.
-*/
-const unsigned char os_toascii[256] = {
-    0x00, 0x01, 0x02, 0x03, 0x85, 0x09, 0x86, 0x7f, /* 00-0f:           */
-    0x87, 0x8d, 0x8e, 0x0b, 0x0c, 0x0d, 0x0e, 0x0f, /* ................ */
-    0x10, 0x11, 0x12, 0x13, 0x8f, 0x0a, 0x08, 0x97, /* 10-1f:           */
-    0x18, 0x19, 0x9c, 0x9d, 0x1c, 0x1d, 0x1e, 0x1f, /* ................ */
-    0x80, 0x81, 0x82, 0x83, 0x84, 0x92, 0x17, 0x1b, /* 20-2f:           */
-    0x88, 0x89, 0x8a, 0x8b, 0x8c, 0x05, 0x06, 0x07, /* ................ */
-    0x90, 0x91, 0x16, 0x93, 0x94, 0x95, 0x96, 0x04, /* 30-3f:           */
-    0x98, 0x99, 0x9a, 0x9b, 0x14, 0x15, 0x9e, 0x1a, /* ................ */
-    0x20, 0xa0, 0xe2, 0xe4, 0xe0, 0xe1, 0xe3, 0xe5, /* 40-4f:           */
-    0xe7, 0xf1, 0xa2, 0x2e, 0x3c, 0x28, 0x2b, 0x7c, /*  ...........<(+| */
-    0x26, 0xe9, 0xea, 0xeb, 0xe8, 0xed, 0xee, 0xef, /* 50-5f:           */
-    0xec, 0xdf, 0x21, 0x24, 0x2a, 0x29, 0x3b, 0x5e, /* &.........!$*);^ */
-    0x2d, 0x2f, 0xc2, 0xc4, 0xc0, 0xc1, 0xc3, 0xc5, /* 60-6f:           */
-    0xc7, 0xd1, 0xa6, 0x2c, 0x25, 0x5f, 0x3e, 0x3f, /* -/.........,%_>? */
-    0xf8, 0xc9, 0xca, 0xcb, 0xc8, 0xcd, 0xce, 0xcf, /* 70-7f:           */
-    0xcc, 0x60, 0x3a, 0x23, 0x40, 0x27, 0x3d, 0x22, /* .........`:#@'=" */
-    0xd8, 0x61, 0x62, 0x63, 0x64, 0x65, 0x66, 0x67, /* 80-8f:           */
-    0x68, 0x69, 0xab, 0xbb, 0xf0, 0xfd, 0xfe, 0xb1, /* .abcdefghi...... */
-    0xb0, 0x6a, 0x6b, 0x6c, 0x6d, 0x6e, 0x6f, 0x70, /* 90-9f:           */
-    0x71, 0x72, 0xaa, 0xba, 0xe6, 0xb8, 0xc6, 0xa4, /* .jklmnopqr...... */
-    0xb5, 0x7e, 0x73, 0x74, 0x75, 0x76, 0x77, 0x78, /* a0-af:           */
-    0x79, 0x7a, 0xa1, 0xbf, 0xd0, 0x5b, 0xde, 0xae, /* .~stuvwxyz...[.. */
-    0xac, 0xa3, 0xa5, 0xb7, 0xa9, 0xa7, 0xb6, 0xbc, /* b0-bf:           */
-    0xbd, 0xbe, 0xdd, 0xa8, 0xaf, 0x5d, 0xb4, 0xd7, /* .............].. */
-    0x7b, 0x41, 0x42, 0x43, 0x44, 0x45, 0x46, 0x47, /* c0-cf:           */
-    0x48, 0x49, 0xad, 0xf4, 0xf6, 0xf2, 0xf3, 0xf5, /* {ABCDEFGHI...... */
-    0x7d, 0x4a, 0x4b, 0x4c, 0x4d, 0x4e, 0x4f, 0x50, /* d0-df:           */
-    0x51, 0x52, 0xb9, 0xfb, 0xfc, 0xf9, 0xfa, 0xff, /* }JKLMNOPQR...... */
-    0x5c, 0xf7, 0x53, 0x54, 0x55, 0x56, 0x57, 0x58, /* e0-ef:           */
-    0x59, 0x5a, 0xb2, 0xd4, 0xd6, 0xd2, 0xd3, 0xd5, /* \.STUVWXYZ...... */
-    0x30, 0x31, 0x32, 0x33, 0x34, 0x35, 0x36, 0x37, /* f0-ff:           */
-    0x38, 0x39, 0xb3, 0xdb, 0xdc, 0xd9, 0xda, 0x9f  /* 0123456789...... */
-};
-
-
-/*
-The US-ASCII to EBCDIC (character set IBM-1047) table:
-This table is bijective (no ambiguous or duplicate characters)
-*/
-const unsigned char os_toebcdic[256] = {
-    0x00, 0x01, 0x02, 0x03, 0x37, 0x2d, 0x2e, 0x2f, /* 00-0f:           */
-    0x16, 0x05, 0x15, 0x0b, 0x0c, 0x0d, 0x0e, 0x0f, /* ................ */
-    0x10, 0x11, 0x12, 0x13, 0x3c, 0x3d, 0x32, 0x26, /* 10-1f:           */
-    0x18, 0x19, 0x3f, 0x27, 0x1c, 0x1d, 0x1e, 0x1f, /* ................ */
-    0x40, 0x5a, 0x7f, 0x7b, 0x5b, 0x6c, 0x50, 0x7d, /* 20-2f:           */
-    0x4d, 0x5d, 0x5c, 0x4e, 0x6b, 0x60, 0x4b, 0x61, /*  !"#$%&'()*+,-./ */
-    0xf0, 0xf1, 0xf2, 0xf3, 0xf4, 0xf5, 0xf6, 0xf7, /* 30-3f:           */
-    0xf8, 0xf9, 0x7a, 0x5e, 0x4c, 0x7e, 0x6e, 0x6f, /* 0123456789:;<=>? */
-    0x7c, 0xc1, 0xc2, 0xc3, 0xc4, 0xc5, 0xc6, 0xc7, /* 40-4f:           */
-    0xc8, 0xc9, 0xd1, 0xd2, 0xd3, 0xd4, 0xd5, 0xd6, /* @ABCDEFGHIJKLMNO */
-    0xd7, 0xd8, 0xd9, 0xe2, 0xe3, 0xe4, 0xe5, 0xe6, /* 50-5f:           */
-    0xe7, 0xe8, 0xe9, 0xad, 0xe0, 0xbd, 0x5f, 0x6d, /* PQRSTUVWXYZ[\]^_ */
-    0x79, 0x81, 0x82, 0x83, 0x84, 0x85, 0x86, 0x87, /* 60-6f:           */
-    0x88, 0x89, 0x91, 0x92, 0x93, 0x94, 0x95, 0x96, /* `abcdefghijklmno */
-    0x97, 0x98, 0x99, 0xa2, 0xa3, 0xa4, 0xa5, 0xa6, /* 70-7f:           */
-    0xa7, 0xa8, 0xa9, 0xc0, 0x4f, 0xd0, 0xa1, 0x07, /* pqrstuvwxyz{|}~. */
-    0x20, 0x21, 0x22, 0x23, 0x24, 0x04, 0x06, 0x08, /* 80-8f:           */
-    0x28, 0x29, 0x2a, 0x2b, 0x2c, 0x09, 0x0a, 0x14, /* ................ */
-    0x30, 0x31, 0x25, 0x33, 0x34, 0x35, 0x36, 0x17, /* 90-9f:           */
-    0x38, 0x39, 0x3a, 0x3b, 0x1a, 0x1b, 0x3e, 0xff, /* ................ */
-    0x41, 0xaa, 0x4a, 0xb1, 0x9f, 0xb2, 0x6a, 0xb5, /* a0-af:           */
-    0xbb, 0xb4, 0x9a, 0x8a, 0xb0, 0xca, 0xaf, 0xbc, /* ................ */
-    0x90, 0x8f, 0xea, 0xfa, 0xbe, 0xa0, 0xb6, 0xb3, /* b0-bf:           */
-    0x9d, 0xda, 0x9b, 0x8b, 0xb7, 0xb8, 0xb9, 0xab, /* ................ */
-    0x64, 0x65, 0x62, 0x66, 0x63, 0x67, 0x9e, 0x68, /* c0-cf:           */
-    0x74, 0x71, 0x72, 0x73, 0x78, 0x75, 0x76, 0x77, /* ................ */
-    0xac, 0x69, 0xed, 0xee, 0xeb, 0xef, 0xec, 0xbf, /* d0-df:           */
-    0x80, 0xfd, 0xfe, 0xfb, 0xfc, 0xba, 0xae, 0x59, /* ................ */
-    0x44, 0x45, 0x42, 0x46, 0x43, 0x47, 0x9c, 0x48, /* e0-ef:           */
-    0x54, 0x51, 0x52, 0x53, 0x58, 0x55, 0x56, 0x57, /* ................ */
-    0x8c, 0x49, 0xcd, 0xce, 0xcb, 0xcf, 0xcc, 0xe1, /* f0-ff:           */
-    0x70, 0xdd, 0xde, 0xdb, 0xdc, 0x8d, 0x8e, 0xdf  /* ................ */
-};
-#endif /*_OSD_POSIX*/
-
-/* Translate a memory block from EBCDIC (host charset) to ASCII (net charset)
- * dest and srce may be identical, or separate memory blocks, but
- * should not overlap. These functions intentionally have an interface
- * compatible to memcpy(3).
- */
-
-void *
-ebcdic2ascii(void *dest, const void *srce, size_t count)
-{
-    unsigned char *udest = dest;
-    const unsigned char *usrce = srce;
-
-    while (count-- != 0) {
-        *udest++ = os_toascii[*usrce++];
-    }
-
-    return dest;
-}
-
-void *
-ascii2ebcdic(void *dest, const void *srce, size_t count)
-{
-    unsigned char *udest = dest;
-    const unsigned char *usrce = srce;
-
-    while (count-- != 0) {
-        *udest++ = os_toebcdic[*usrce++];
-    }
-
-    return dest;
-}
-
-#endif
diff --git a/crypto/openssl/crypto/ebcdic.h b/crypto/openssl/crypto/ebcdic.h
deleted file mode 100644
index 6d65afcf9e75..000000000000
--- a/crypto/openssl/crypto/ebcdic.h
+++ /dev/null
@@ -1,19 +0,0 @@
-/* crypto/ebcdic.h */
-
-#ifndef HEADER_EBCDIC_H
-#define HEADER_EBCDIC_H
-
-#include <sys/types.h>
-
-/* Avoid name clashes with other applications */
-#define os_toascii   _openssl_os_toascii
-#define os_toebcdic  _openssl_os_toebcdic
-#define ebcdic2ascii _openssl_ebcdic2ascii
-#define ascii2ebcdic _openssl_ascii2ebcdic
-
-extern const unsigned char os_toascii[256];
-extern const unsigned char os_toebcdic[256];
-void *ebcdic2ascii(void *dest, const void *srce, size_t count);
-void *ascii2ebcdic(void *dest, const void *srce, size_t count);
-
-#endif
diff --git a/crypto/openssl/crypto/ec/Makefile b/crypto/openssl/crypto/ec/Makefile
deleted file mode 100644
index 42f7bb7fc8d4..000000000000
--- a/crypto/openssl/crypto/ec/Makefile
+++ /dev/null
@@ -1,193 +0,0 @@
-#
-# crypto/ec/Makefile
-#
-
-DIR=	ec
-TOP=	../..
-CC=	cc
-INCLUDES= -I.. -I$(TOP) -I../../include
-CFLAG=-g
-MAKEFILE=	Makefile
-AR=		ar r
-
-CFLAGS= $(INCLUDES) $(CFLAG)
-
-GENERAL=Makefile
-TEST=ectest.c
-APPS=
-
-LIB=$(TOP)/libcrypto.a
-LIBSRC=	ec_lib.c ecp_smpl.c ecp_mont.c ecp_nist.c ec_cvt.c ec_mult.c\
-	ec_err.c ec_curve.c ec_check.c ec_print.c ec_asn1.c ec_key.c\
-	ec2_smpl.c ec2_smpt.c ec2_mult.c
-
-LIBOBJ=	ec_lib.o ecp_smpl.o ecp_mont.o ecp_nist.o ec_cvt.o ec_mult.o\
-	ec_err.o ec_curve.o ec_check.o ec_print.o ec_asn1.o ec_key.o\
-	ec2_smpl.o ec2_mult.o
-
-SRC= $(LIBSRC)
-
-EXHEADER= ec.h
-HEADER=	ec_lcl.h $(EXHEADER)
-
-ALL=    $(GENERAL) $(SRC) $(HEADER)
-
-top:
-	(cd ../..; $(MAKE) DIRS=crypto SDIRS=$(DIR) sub_all)
-
-all:	lib
-
-lib:	$(LIBOBJ)
-	$(AR) $(LIB) $(LIBOBJ)
-	$(RANLIB) $(LIB) || echo Never mind.
-	@touch lib
-
-files:
-	$(PERL) $(TOP)/util/files.pl Makefile >> $(TOP)/MINFO
-
-links:
-	@$(PERL) $(TOP)/util/mklink.pl ../../include/openssl $(EXHEADER)
-	@$(PERL) $(TOP)/util/mklink.pl ../../test $(TEST)
-	@$(PERL) $(TOP)/util/mklink.pl ../../apps $(APPS)
-
-install:
-	@[ -n "$(INSTALLTOP)" ] # should be set by top Makefile...
-	@headerlist="$(EXHEADER)"; for i in $$headerlist ; \
-	do  \
-	(cp $$i $(INSTALL_PREFIX)$(INSTALLTOP)/include/openssl/$$i; \
-	chmod 644 $(INSTALL_PREFIX)$(INSTALLTOP)/include/openssl/$$i ); \
-	done;
-
-tags:
-	ctags $(SRC)
-
-tests:
-
-lint:
-	lint -DLINT $(INCLUDES) $(SRC)>fluff
-
-depend:
-	@[ -n "$(MAKEDEPEND)" ] # should be set by upper Makefile...
-	$(MAKEDEPEND) -- $(CFLAG) $(INCLUDES) $(DEPFLAG) -- $(PROGS) $(LIBSRC)
-
-dclean:
-	$(PERL) -pe 'if (/^# DO NOT DELETE THIS LINE/) {print; exit(0);}' $(MAKEFILE) >Makefile.new
-	mv -f Makefile.new $(MAKEFILE)
-
-clean:
-	rm -f *.o */*.o *.obj lib tags core .pure .nfs* *.old *.bak fluff
-
-# DO NOT DELETE THIS LINE -- make depend depends on it.
-
-ec2_mult.o: ../../include/openssl/asn1.h ../../include/openssl/bio.h
-ec2_mult.o: ../../include/openssl/bn.h ../../include/openssl/crypto.h
-ec2_mult.o: ../../include/openssl/e_os2.h ../../include/openssl/ec.h
-ec2_mult.o: ../../include/openssl/err.h ../../include/openssl/lhash.h
-ec2_mult.o: ../../include/openssl/obj_mac.h ../../include/openssl/opensslconf.h
-ec2_mult.o: ../../include/openssl/opensslv.h ../../include/openssl/ossl_typ.h
-ec2_mult.o: ../../include/openssl/safestack.h ../../include/openssl/stack.h
-ec2_mult.o: ../../include/openssl/symhacks.h ec2_mult.c ec_lcl.h
-ec2_smpl.o: ../../include/openssl/asn1.h ../../include/openssl/bio.h
-ec2_smpl.o: ../../include/openssl/bn.h ../../include/openssl/crypto.h
-ec2_smpl.o: ../../include/openssl/e_os2.h ../../include/openssl/ec.h
-ec2_smpl.o: ../../include/openssl/err.h ../../include/openssl/lhash.h
-ec2_smpl.o: ../../include/openssl/obj_mac.h ../../include/openssl/opensslconf.h
-ec2_smpl.o: ../../include/openssl/opensslv.h ../../include/openssl/ossl_typ.h
-ec2_smpl.o: ../../include/openssl/safestack.h ../../include/openssl/stack.h
-ec2_smpl.o: ../../include/openssl/symhacks.h ec2_smpl.c ec2_smpt.c ec_lcl.h
-ec2_smpt.o: ec2_smpt.c
-ec_asn1.o: ../../include/openssl/asn1.h ../../include/openssl/asn1t.h
-ec_asn1.o: ../../include/openssl/bio.h ../../include/openssl/bn.h
-ec_asn1.o: ../../include/openssl/crypto.h ../../include/openssl/e_os2.h
-ec_asn1.o: ../../include/openssl/ec.h ../../include/openssl/err.h
-ec_asn1.o: ../../include/openssl/lhash.h ../../include/openssl/obj_mac.h
-ec_asn1.o: ../../include/openssl/objects.h ../../include/openssl/opensslconf.h
-ec_asn1.o: ../../include/openssl/opensslv.h ../../include/openssl/ossl_typ.h
-ec_asn1.o: ../../include/openssl/safestack.h ../../include/openssl/stack.h
-ec_asn1.o: ../../include/openssl/symhacks.h ec_asn1.c ec_lcl.h
-ec_check.o: ../../include/openssl/asn1.h ../../include/openssl/bio.h
-ec_check.o: ../../include/openssl/bn.h ../../include/openssl/crypto.h
-ec_check.o: ../../include/openssl/e_os2.h ../../include/openssl/ec.h
-ec_check.o: ../../include/openssl/err.h ../../include/openssl/lhash.h
-ec_check.o: ../../include/openssl/obj_mac.h ../../include/openssl/opensslconf.h
-ec_check.o: ../../include/openssl/opensslv.h ../../include/openssl/ossl_typ.h
-ec_check.o: ../../include/openssl/safestack.h ../../include/openssl/stack.h
-ec_check.o: ../../include/openssl/symhacks.h ec_check.c ec_lcl.h
-ec_curve.o: ../../include/openssl/asn1.h ../../include/openssl/bio.h
-ec_curve.o: ../../include/openssl/bn.h ../../include/openssl/crypto.h
-ec_curve.o: ../../include/openssl/e_os2.h ../../include/openssl/ec.h
-ec_curve.o: ../../include/openssl/err.h ../../include/openssl/lhash.h
-ec_curve.o: ../../include/openssl/obj_mac.h ../../include/openssl/opensslconf.h
-ec_curve.o: ../../include/openssl/opensslv.h ../../include/openssl/ossl_typ.h
-ec_curve.o: ../../include/openssl/safestack.h ../../include/openssl/stack.h
-ec_curve.o: ../../include/openssl/symhacks.h ec_curve.c ec_lcl.h
-ec_cvt.o: ../../include/openssl/asn1.h ../../include/openssl/bio.h
-ec_cvt.o: ../../include/openssl/bn.h ../../include/openssl/crypto.h
-ec_cvt.o: ../../include/openssl/e_os2.h ../../include/openssl/ec.h
-ec_cvt.o: ../../include/openssl/err.h ../../include/openssl/lhash.h
-ec_cvt.o: ../../include/openssl/obj_mac.h ../../include/openssl/opensslconf.h
-ec_cvt.o: ../../include/openssl/opensslv.h ../../include/openssl/ossl_typ.h
-ec_cvt.o: ../../include/openssl/safestack.h ../../include/openssl/stack.h
-ec_cvt.o: ../../include/openssl/symhacks.h ec_cvt.c ec_lcl.h
-ec_err.o: ../../include/openssl/asn1.h ../../include/openssl/bio.h
-ec_err.o: ../../include/openssl/crypto.h ../../include/openssl/e_os2.h
-ec_err.o: ../../include/openssl/ec.h ../../include/openssl/err.h
-ec_err.o: ../../include/openssl/lhash.h ../../include/openssl/opensslconf.h
-ec_err.o: ../../include/openssl/opensslv.h ../../include/openssl/ossl_typ.h
-ec_err.o: ../../include/openssl/safestack.h ../../include/openssl/stack.h
-ec_err.o: ../../include/openssl/symhacks.h ec_err.c
-ec_key.o: ../../include/openssl/asn1.h ../../include/openssl/bio.h
-ec_key.o: ../../include/openssl/bn.h ../../include/openssl/crypto.h
-ec_key.o: ../../include/openssl/e_os2.h ../../include/openssl/ec.h
-ec_key.o: ../../include/openssl/err.h ../../include/openssl/lhash.h
-ec_key.o: ../../include/openssl/obj_mac.h ../../include/openssl/opensslconf.h
-ec_key.o: ../../include/openssl/opensslv.h ../../include/openssl/ossl_typ.h
-ec_key.o: ../../include/openssl/safestack.h ../../include/openssl/stack.h
-ec_key.o: ../../include/openssl/symhacks.h ec_key.c ec_lcl.h
-ec_lib.o: ../../include/openssl/asn1.h ../../include/openssl/bio.h
-ec_lib.o: ../../include/openssl/bn.h ../../include/openssl/crypto.h
-ec_lib.o: ../../include/openssl/e_os2.h ../../include/openssl/ec.h
-ec_lib.o: ../../include/openssl/err.h ../../include/openssl/lhash.h
-ec_lib.o: ../../include/openssl/obj_mac.h ../../include/openssl/opensslconf.h
-ec_lib.o: ../../include/openssl/opensslv.h ../../include/openssl/ossl_typ.h
-ec_lib.o: ../../include/openssl/safestack.h ../../include/openssl/stack.h
-ec_lib.o: ../../include/openssl/symhacks.h ec_lcl.h ec_lib.c
-ec_mult.o: ../../include/openssl/asn1.h ../../include/openssl/bio.h
-ec_mult.o: ../../include/openssl/bn.h ../../include/openssl/crypto.h
-ec_mult.o: ../../include/openssl/e_os2.h ../../include/openssl/ec.h
-ec_mult.o: ../../include/openssl/err.h ../../include/openssl/lhash.h
-ec_mult.o: ../../include/openssl/obj_mac.h ../../include/openssl/opensslconf.h
-ec_mult.o: ../../include/openssl/opensslv.h ../../include/openssl/ossl_typ.h
-ec_mult.o: ../../include/openssl/safestack.h ../../include/openssl/stack.h
-ec_mult.o: ../../include/openssl/symhacks.h ec_lcl.h ec_mult.c
-ec_print.o: ../../include/openssl/asn1.h ../../include/openssl/bio.h
-ec_print.o: ../../include/openssl/bn.h ../../include/openssl/crypto.h
-ec_print.o: ../../include/openssl/e_os2.h ../../include/openssl/ec.h
-ec_print.o: ../../include/openssl/obj_mac.h ../../include/openssl/opensslconf.h
-ec_print.o: ../../include/openssl/opensslv.h ../../include/openssl/ossl_typ.h
-ec_print.o: ../../include/openssl/safestack.h ../../include/openssl/stack.h
-ec_print.o: ../../include/openssl/symhacks.h ec_lcl.h ec_print.c
-ecp_mont.o: ../../include/openssl/asn1.h ../../include/openssl/bio.h
-ecp_mont.o: ../../include/openssl/bn.h ../../include/openssl/crypto.h
-ecp_mont.o: ../../include/openssl/e_os2.h ../../include/openssl/ec.h
-ecp_mont.o: ../../include/openssl/err.h ../../include/openssl/lhash.h
-ecp_mont.o: ../../include/openssl/obj_mac.h ../../include/openssl/opensslconf.h
-ecp_mont.o: ../../include/openssl/opensslv.h ../../include/openssl/ossl_typ.h
-ecp_mont.o: ../../include/openssl/safestack.h ../../include/openssl/stack.h
-ecp_mont.o: ../../include/openssl/symhacks.h ec_lcl.h ecp_mont.c
-ecp_nist.o: ../../include/openssl/asn1.h ../../include/openssl/bio.h
-ecp_nist.o: ../../include/openssl/bn.h ../../include/openssl/crypto.h
-ecp_nist.o: ../../include/openssl/e_os2.h ../../include/openssl/ec.h
-ecp_nist.o: ../../include/openssl/err.h ../../include/openssl/lhash.h
-ecp_nist.o: ../../include/openssl/obj_mac.h ../../include/openssl/opensslconf.h
-ecp_nist.o: ../../include/openssl/opensslv.h ../../include/openssl/ossl_typ.h
-ecp_nist.o: ../../include/openssl/safestack.h ../../include/openssl/stack.h
-ecp_nist.o: ../../include/openssl/symhacks.h ec_lcl.h ecp_nist.c
-ecp_smpl.o: ../../include/openssl/asn1.h ../../include/openssl/bio.h
-ecp_smpl.o: ../../include/openssl/bn.h ../../include/openssl/crypto.h
-ecp_smpl.o: ../../include/openssl/e_os2.h ../../include/openssl/ec.h
-ecp_smpl.o: ../../include/openssl/err.h ../../include/openssl/lhash.h
-ecp_smpl.o: ../../include/openssl/obj_mac.h ../../include/openssl/opensslconf.h
-ecp_smpl.o: ../../include/openssl/opensslv.h ../../include/openssl/ossl_typ.h
-ecp_smpl.o: ../../include/openssl/safestack.h ../../include/openssl/stack.h
-ecp_smpl.o: ../../include/openssl/symhacks.h ec_lcl.h ecp_smpl.c
diff --git a/crypto/openssl/crypto/ec/ec.h b/crypto/openssl/crypto/ec/ec.h
deleted file mode 100644
index 3c96fbd0d86d..000000000000
--- a/crypto/openssl/crypto/ec/ec.h
+++ /dev/null
@@ -1,525 +0,0 @@
-/* crypto/ec/ec.h */
-/*
- * Originally written by Bodo Moeller for the OpenSSL project.
- */
-/* ====================================================================
- * Copyright (c) 1998-2003 The OpenSSL Project.  All rights reserved.
- *
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions
- * are met:
- *
- * 1. Redistributions of source code must retain the above copyright
- *    notice, this list of conditions and the following disclaimer. 
- *
- * 2. Redistributions in binary form must reproduce the above copyright
- *    notice, this list of conditions and the following disclaimer in
- *    the documentation and/or other materials provided with the
- *    distribution.
- *
- * 3. All advertising materials mentioning features or use of this
- *    software must display the following acknowledgment:
- *    "This product includes software developed by the OpenSSL Project
- *    for use in the OpenSSL Toolkit. (http://www.openssl.org/)"
- *
- * 4. The names "OpenSSL Toolkit" and "OpenSSL Project" must not be used to
- *    endorse or promote products derived from this software without
- *    prior written permission. For written permission, please contact
- *    openssl-core@openssl.org.
- *
- * 5. Products derived from this software may not be called "OpenSSL"
- *    nor may "OpenSSL" appear in their names without prior written
- *    permission of the OpenSSL Project.
- *
- * 6. Redistributions of any form whatsoever must retain the following
- *    acknowledgment:
- *    "This product includes software developed by the OpenSSL Project
- *    for use in the OpenSSL Toolkit (http://www.openssl.org/)"
- *
- * THIS SOFTWARE IS PROVIDED BY THE OpenSSL PROJECT ``AS IS'' AND ANY
- * EXPRESSED OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
- * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR
- * PURPOSE ARE DISCLAIMED.  IN NO EVENT SHALL THE OpenSSL PROJECT OR
- * ITS CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
- * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
- * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
- * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
- * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
- * STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
- * ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED
- * OF THE POSSIBILITY OF SUCH DAMAGE.
- * ====================================================================
- *
- * This product includes cryptographic software written by Eric Young
- * (eay@cryptsoft.com).  This product includes software written by Tim
- * Hudson (tjh@cryptsoft.com).
- *
- */
-/* ====================================================================
- * Copyright 2002 Sun Microsystems, Inc. ALL RIGHTS RESERVED.
- *
- * Portions of the attached software ("Contribution") are developed by 
- * SUN MICROSYSTEMS, INC., and are contributed to the OpenSSL project.
- *
- * The Contribution is licensed pursuant to the OpenSSL open source
- * license provided above.
- *
- * The elliptic curve binary polynomial software is originally written by 
- * Sheueling Chang Shantz and Douglas Stebila of Sun Microsystems Laboratories.
- *
- */
-
-#ifndef HEADER_EC_H
-#define HEADER_EC_H
-
-#include <openssl/opensslconf.h>
-
-#ifdef OPENSSL_NO_EC
-#error EC is disabled.
-#endif
-
-#include <openssl/asn1.h>
-#include <openssl/symhacks.h>
-#ifndef OPENSSL_NO_DEPRECATED
-#include <openssl/bn.h>
-#endif
-
-#ifdef  __cplusplus
-extern "C" {
-#elif defined(__SUNPRO_C)
-# if __SUNPRO_C >= 0x520
-# pragma error_messages (off,E_ARRAY_OF_INCOMPLETE_NONAME,E_ARRAY_OF_INCOMPLETE)
-# endif
-#endif
-
-
-#ifndef OPENSSL_ECC_MAX_FIELD_BITS
-# define OPENSSL_ECC_MAX_FIELD_BITS 661
-#endif
-
-typedef enum {
-	/* values as defined in X9.62 (ECDSA) and elsewhere */
-	POINT_CONVERSION_COMPRESSED = 2,
-	POINT_CONVERSION_UNCOMPRESSED = 4,
-	POINT_CONVERSION_HYBRID = 6
-} point_conversion_form_t;
-
-
-typedef struct ec_method_st EC_METHOD;
-
-typedef struct ec_group_st
-	/*
-	 EC_METHOD *meth;
-	 -- field definition
-	 -- curve coefficients
-	 -- optional generator with associated information (order, cofactor)
-	 -- optional extra data (precomputed table for fast computation of multiples of generator)
-	 -- ASN1 stuff
-	*/
-	EC_GROUP;
-
-typedef struct ec_point_st EC_POINT;
-
-
-/* EC_METHODs for curves over GF(p).
- * EC_GFp_simple_method provides the basis for the optimized methods.
- */
-const EC_METHOD *EC_GFp_simple_method(void);
-const EC_METHOD *EC_GFp_mont_method(void);
-const EC_METHOD *EC_GFp_nist_method(void);
-
-/* EC_METHOD for curves over GF(2^m).
- */
-const EC_METHOD *EC_GF2m_simple_method(void);
-
-
-EC_GROUP *EC_GROUP_new(const EC_METHOD *);
-void EC_GROUP_free(EC_GROUP *);
-void EC_GROUP_clear_free(EC_GROUP *);
-int EC_GROUP_copy(EC_GROUP *, const EC_GROUP *);
-EC_GROUP *EC_GROUP_dup(const EC_GROUP *);
-
-const EC_METHOD *EC_GROUP_method_of(const EC_GROUP *);
-int EC_METHOD_get_field_type(const EC_METHOD *);
-
-int EC_GROUP_set_generator(EC_GROUP *, const EC_POINT *generator, const BIGNUM *order, const BIGNUM *cofactor);
-const EC_POINT *EC_GROUP_get0_generator(const EC_GROUP *);
-int EC_GROUP_get_order(const EC_GROUP *, BIGNUM *order, BN_CTX *);
-int EC_GROUP_get_cofactor(const EC_GROUP *, BIGNUM *cofactor, BN_CTX *);
-
-void EC_GROUP_set_curve_name(EC_GROUP *, int nid);
-int EC_GROUP_get_curve_name(const EC_GROUP *);
-
-void EC_GROUP_set_asn1_flag(EC_GROUP *, int flag);
-int EC_GROUP_get_asn1_flag(const EC_GROUP *);
-
-void EC_GROUP_set_point_conversion_form(EC_GROUP *, point_conversion_form_t);
-point_conversion_form_t EC_GROUP_get_point_conversion_form(const EC_GROUP *);
-
-unsigned char *EC_GROUP_get0_seed(const EC_GROUP *);
-size_t EC_GROUP_get_seed_len(const EC_GROUP *);
-size_t EC_GROUP_set_seed(EC_GROUP *, const unsigned char *, size_t len);
-
-int EC_GROUP_set_curve_GFp(EC_GROUP *, const BIGNUM *p, const BIGNUM *a, const BIGNUM *b, BN_CTX *);
-int EC_GROUP_get_curve_GFp(const EC_GROUP *, BIGNUM *p, BIGNUM *a, BIGNUM *b, BN_CTX *);
-int EC_GROUP_set_curve_GF2m(EC_GROUP *, const BIGNUM *p, const BIGNUM *a, const BIGNUM *b, BN_CTX *);
-int EC_GROUP_get_curve_GF2m(const EC_GROUP *, BIGNUM *p, BIGNUM *a, BIGNUM *b, BN_CTX *);
-
-/* returns the number of bits needed to represent a field element */
-int EC_GROUP_get_degree(const EC_GROUP *);
-
-/* EC_GROUP_check() returns 1 if 'group' defines a valid group, 0 otherwise */
-int EC_GROUP_check(const EC_GROUP *group, BN_CTX *ctx);
-/* EC_GROUP_check_discriminant() returns 1 if the discriminant of the
- * elliptic curve is not zero, 0 otherwise */
-int EC_GROUP_check_discriminant(const EC_GROUP *, BN_CTX *);
-
-/* EC_GROUP_cmp() returns 0 if both groups are equal and 1 otherwise */
-int EC_GROUP_cmp(const EC_GROUP *, const EC_GROUP *, BN_CTX *);
-
-/* EC_GROUP_new_GF*() calls EC_GROUP_new() and EC_GROUP_set_GF*()
- * after choosing an appropriate EC_METHOD */
-EC_GROUP *EC_GROUP_new_curve_GFp(const BIGNUM *p, const BIGNUM *a, const BIGNUM *b, BN_CTX *);
-EC_GROUP *EC_GROUP_new_curve_GF2m(const BIGNUM *p, const BIGNUM *a, const BIGNUM *b, BN_CTX *);
-
-/* EC_GROUP_new_by_curve_name() creates a EC_GROUP structure
- * specified by a curve name (in form of a NID) */
-EC_GROUP *EC_GROUP_new_by_curve_name(int nid);
-/* handling of internal curves */
-typedef struct { 
-	int nid;
-	const char *comment;
-	} EC_builtin_curve;
-/* EC_builtin_curves(EC_builtin_curve *r, size_t size) returns number 
- * of all available curves or zero if a error occurred. 
- * In case r ist not zero nitems EC_builtin_curve structures 
- * are filled with the data of the first nitems internal groups */
-size_t EC_get_builtin_curves(EC_builtin_curve *r, size_t nitems);
-
-
-/* EC_POINT functions */
-
-EC_POINT *EC_POINT_new(const EC_GROUP *);
-void EC_POINT_free(EC_POINT *);
-void EC_POINT_clear_free(EC_POINT *);
-int EC_POINT_copy(EC_POINT *, const EC_POINT *);
-EC_POINT *EC_POINT_dup(const EC_POINT *, const EC_GROUP *);
- 
-const EC_METHOD *EC_POINT_method_of(const EC_POINT *);
-
-int EC_POINT_set_to_infinity(const EC_GROUP *, EC_POINT *);
-int EC_POINT_set_Jprojective_coordinates_GFp(const EC_GROUP *, EC_POINT *,
-	const BIGNUM *x, const BIGNUM *y, const BIGNUM *z, BN_CTX *);
-int EC_POINT_get_Jprojective_coordinates_GFp(const EC_GROUP *, const EC_POINT *,
-	BIGNUM *x, BIGNUM *y, BIGNUM *z, BN_CTX *);
-int EC_POINT_set_affine_coordinates_GFp(const EC_GROUP *, EC_POINT *,
-	const BIGNUM *x, const BIGNUM *y, BN_CTX *);
-int EC_POINT_get_affine_coordinates_GFp(const EC_GROUP *, const EC_POINT *,
-	BIGNUM *x, BIGNUM *y, BN_CTX *);
-int EC_POINT_set_compressed_coordinates_GFp(const EC_GROUP *, EC_POINT *,
-	const BIGNUM *x, int y_bit, BN_CTX *);
-
-int EC_POINT_set_affine_coordinates_GF2m(const EC_GROUP *, EC_POINT *,
-	const BIGNUM *x, const BIGNUM *y, BN_CTX *);
-int EC_POINT_get_affine_coordinates_GF2m(const EC_GROUP *, const EC_POINT *,
-	BIGNUM *x, BIGNUM *y, BN_CTX *);
-int EC_POINT_set_compressed_coordinates_GF2m(const EC_GROUP *, EC_POINT *,
-	const BIGNUM *x, int y_bit, BN_CTX *);
-
-size_t EC_POINT_point2oct(const EC_GROUP *, const EC_POINT *, point_conversion_form_t form,
-        unsigned char *buf, size_t len, BN_CTX *);
-int EC_POINT_oct2point(const EC_GROUP *, EC_POINT *,
-        const unsigned char *buf, size_t len, BN_CTX *);
-
-/* other interfaces to point2oct/oct2point: */
-BIGNUM *EC_POINT_point2bn(const EC_GROUP *, const EC_POINT *,
-	point_conversion_form_t form, BIGNUM *, BN_CTX *);
-EC_POINT *EC_POINT_bn2point(const EC_GROUP *, const BIGNUM *,
-	EC_POINT *, BN_CTX *);
-char *EC_POINT_point2hex(const EC_GROUP *, const EC_POINT *,
-	point_conversion_form_t form, BN_CTX *);
-EC_POINT *EC_POINT_hex2point(const EC_GROUP *, const char *,
-	EC_POINT *, BN_CTX *);
-
-int EC_POINT_add(const EC_GROUP *, EC_POINT *r, const EC_POINT *a, const EC_POINT *b, BN_CTX *);
-int EC_POINT_dbl(const EC_GROUP *, EC_POINT *r, const EC_POINT *a, BN_CTX *);
-int EC_POINT_invert(const EC_GROUP *, EC_POINT *, BN_CTX *);
-
-int EC_POINT_is_at_infinity(const EC_GROUP *, const EC_POINT *);
-int EC_POINT_is_on_curve(const EC_GROUP *, const EC_POINT *, BN_CTX *);
-int EC_POINT_cmp(const EC_GROUP *, const EC_POINT *a, const EC_POINT *b, BN_CTX *);
-
-int EC_POINT_make_affine(const EC_GROUP *, EC_POINT *, BN_CTX *);
-int EC_POINTs_make_affine(const EC_GROUP *, size_t num, EC_POINT *[], BN_CTX *);
-
-
-int EC_POINTs_mul(const EC_GROUP *, EC_POINT *r, const BIGNUM *, size_t num, const EC_POINT *[], const BIGNUM *[], BN_CTX *);
-int EC_POINT_mul(const EC_GROUP *, EC_POINT *r, const BIGNUM *, const EC_POINT *, const BIGNUM *, BN_CTX *);
-
-/* EC_GROUP_precompute_mult() stores multiples of generator for faster point multiplication */
-int EC_GROUP_precompute_mult(EC_GROUP *, BN_CTX *);
-/* EC_GROUP_have_precompute_mult() reports whether such precomputation has been done */
-int EC_GROUP_have_precompute_mult(const EC_GROUP *);
-
-
-
-/* ASN1 stuff */
-
-/* EC_GROUP_get_basis_type() returns the NID of the basis type
- * used to represent the field elements */
-int EC_GROUP_get_basis_type(const EC_GROUP *);
-int EC_GROUP_get_trinomial_basis(const EC_GROUP *, unsigned int *k);
-int EC_GROUP_get_pentanomial_basis(const EC_GROUP *, unsigned int *k1, 
-	unsigned int *k2, unsigned int *k3);
-
-#define OPENSSL_EC_NAMED_CURVE	0x001
-
-typedef struct ecpk_parameters_st ECPKPARAMETERS;
-
-EC_GROUP *d2i_ECPKParameters(EC_GROUP **, const unsigned char **in, long len);
-int i2d_ECPKParameters(const EC_GROUP *, unsigned char **out);
-
-#define d2i_ECPKParameters_bio(bp,x) ASN1_d2i_bio_of(EC_GROUP,NULL,d2i_ECPKParameters,bp,x)
-#define i2d_ECPKParameters_bio(bp,x) ASN1_i2d_bio_of_const(EC_GROUP,i2d_ECPKParameters,bp,x)
-#define d2i_ECPKParameters_fp(fp,x) (EC_GROUP *)ASN1_d2i_fp(NULL, \
-                (char *(*)())d2i_ECPKParameters,(fp),(unsigned char **)(x))
-#define i2d_ECPKParameters_fp(fp,x) ASN1_i2d_fp(i2d_ECPKParameters,(fp), \
-		(unsigned char *)(x))
-
-#ifndef OPENSSL_NO_BIO
-int     ECPKParameters_print(BIO *bp, const EC_GROUP *x, int off);
-#endif
-#ifndef OPENSSL_NO_FP_API
-int     ECPKParameters_print_fp(FILE *fp, const EC_GROUP *x, int off);
-#endif
-
-/* the EC_KEY stuff */
-typedef struct ec_key_st EC_KEY;
-
-/* some values for the encoding_flag */
-#define EC_PKEY_NO_PARAMETERS	0x001
-#define EC_PKEY_NO_PUBKEY	0x002
-
-EC_KEY *EC_KEY_new(void);
-EC_KEY *EC_KEY_new_by_curve_name(int nid);
-void EC_KEY_free(EC_KEY *);
-EC_KEY *EC_KEY_copy(EC_KEY *, const EC_KEY *);
-EC_KEY *EC_KEY_dup(const EC_KEY *);
-
-int EC_KEY_up_ref(EC_KEY *);
-
-const EC_GROUP *EC_KEY_get0_group(const EC_KEY *);
-int EC_KEY_set_group(EC_KEY *, const EC_GROUP *);
-const BIGNUM *EC_KEY_get0_private_key(const EC_KEY *);
-int EC_KEY_set_private_key(EC_KEY *, const BIGNUM *);
-const EC_POINT *EC_KEY_get0_public_key(const EC_KEY *);
-int EC_KEY_set_public_key(EC_KEY *, const EC_POINT *);
-unsigned EC_KEY_get_enc_flags(const EC_KEY *);
-void EC_KEY_set_enc_flags(EC_KEY *, unsigned int);
-point_conversion_form_t EC_KEY_get_conv_form(const EC_KEY *);
-void EC_KEY_set_conv_form(EC_KEY *, point_conversion_form_t);
-/* functions to set/get method specific data  */
-void *EC_KEY_get_key_method_data(EC_KEY *, 
-	void *(*dup_func)(void *), void (*free_func)(void *), void (*clear_free_func)(void *));
-void EC_KEY_insert_key_method_data(EC_KEY *, void *data,
-	void *(*dup_func)(void *), void (*free_func)(void *), void (*clear_free_func)(void *));
-/* wrapper functions for the underlying EC_GROUP object */
-void EC_KEY_set_asn1_flag(EC_KEY *, int);
-int EC_KEY_precompute_mult(EC_KEY *, BN_CTX *ctx);
-
-/* EC_KEY_generate_key() creates a ec private (public) key */
-int EC_KEY_generate_key(EC_KEY *);
-/* EC_KEY_check_key() */
-int EC_KEY_check_key(const EC_KEY *);
-
-/* de- and encoding functions for SEC1 ECPrivateKey */
-EC_KEY *d2i_ECPrivateKey(EC_KEY **a, const unsigned char **in, long len);
-int i2d_ECPrivateKey(EC_KEY *a, unsigned char **out);
-/* de- and encoding functions for EC parameters */
-EC_KEY *d2i_ECParameters(EC_KEY **a, const unsigned char **in, long len);
-int i2d_ECParameters(EC_KEY *a, unsigned char **out);
-/* de- and encoding functions for EC public key
- * (octet string, not DER -- hence 'o2i' and 'i2o') */
-EC_KEY *o2i_ECPublicKey(EC_KEY **a, const unsigned char **in, long len);
-int i2o_ECPublicKey(EC_KEY *a, unsigned char **out);
-
-#ifndef OPENSSL_NO_BIO
-int	ECParameters_print(BIO *bp, const EC_KEY *x);
-int	EC_KEY_print(BIO *bp, const EC_KEY *x, int off);
-#endif
-#ifndef OPENSSL_NO_FP_API
-int	ECParameters_print_fp(FILE *fp, const EC_KEY *x);
-int	EC_KEY_print_fp(FILE *fp, const EC_KEY *x, int off);
-#endif
-
-#define ECParameters_dup(x) ASN1_dup_of(EC_KEY,i2d_ECParameters,d2i_ECParameters,x)
-
-#ifndef __cplusplus
-#if defined(__SUNPRO_C)
-#  if __SUNPRO_C >= 0x520
-# pragma error_messages (default,E_ARRAY_OF_INCOMPLETE_NONAME,E_ARRAY_OF_INCOMPLETE)
-#  endif
-# endif
-#endif
-
-/* BEGIN ERROR CODES */
-/* The following lines are auto generated by the script mkerr.pl. Any changes
- * made after this point may be overwritten when the script is next run.
- */
-void ERR_load_EC_strings(void);
-
-/* Error codes for the EC functions. */
-
-/* Function codes. */
-#define EC_F_COMPUTE_WNAF				 143
-#define EC_F_D2I_ECPARAMETERS				 144
-#define EC_F_D2I_ECPKPARAMETERS				 145
-#define EC_F_D2I_ECPRIVATEKEY				 146
-#define EC_F_ECPARAMETERS_PRINT				 147
-#define EC_F_ECPARAMETERS_PRINT_FP			 148
-#define EC_F_ECPKPARAMETERS_PRINT			 149
-#define EC_F_ECPKPARAMETERS_PRINT_FP			 150
-#define EC_F_ECP_NIST_MOD_192				 203
-#define EC_F_ECP_NIST_MOD_224				 204
-#define EC_F_ECP_NIST_MOD_256				 205
-#define EC_F_ECP_NIST_MOD_521				 206
-#define EC_F_EC_ASN1_GROUP2CURVE			 153
-#define EC_F_EC_ASN1_GROUP2FIELDID			 154
-#define EC_F_EC_ASN1_GROUP2PARAMETERS			 155
-#define EC_F_EC_ASN1_GROUP2PKPARAMETERS			 156
-#define EC_F_EC_ASN1_PARAMETERS2GROUP			 157
-#define EC_F_EC_ASN1_PKPARAMETERS2GROUP			 158
-#define EC_F_EC_EX_DATA_SET_DATA			 211
-#define EC_F_EC_GF2M_MONTGOMERY_POINT_MULTIPLY		 208
-#define EC_F_EC_GF2M_SIMPLE_GROUP_CHECK_DISCRIMINANT	 159
-#define EC_F_EC_GF2M_SIMPLE_GROUP_SET_CURVE		 195
-#define EC_F_EC_GF2M_SIMPLE_OCT2POINT			 160
-#define EC_F_EC_GF2M_SIMPLE_POINT2OCT			 161
-#define EC_F_EC_GF2M_SIMPLE_POINT_GET_AFFINE_COORDINATES 162
-#define EC_F_EC_GF2M_SIMPLE_POINT_SET_AFFINE_COORDINATES 163
-#define EC_F_EC_GF2M_SIMPLE_SET_COMPRESSED_COORDINATES	 164
-#define EC_F_EC_GFP_MONT_FIELD_DECODE			 133
-#define EC_F_EC_GFP_MONT_FIELD_ENCODE			 134
-#define EC_F_EC_GFP_MONT_FIELD_MUL			 131
-#define EC_F_EC_GFP_MONT_FIELD_SET_TO_ONE		 209
-#define EC_F_EC_GFP_MONT_FIELD_SQR			 132
-#define EC_F_EC_GFP_MONT_GROUP_SET_CURVE		 189
-#define EC_F_EC_GFP_MONT_GROUP_SET_CURVE_GFP		 135
-#define EC_F_EC_GFP_NIST_FIELD_MUL			 200
-#define EC_F_EC_GFP_NIST_FIELD_SQR			 201
-#define EC_F_EC_GFP_NIST_GROUP_SET_CURVE		 202
-#define EC_F_EC_GFP_SIMPLE_GROUP_CHECK_DISCRIMINANT	 165
-#define EC_F_EC_GFP_SIMPLE_GROUP_SET_CURVE		 166
-#define EC_F_EC_GFP_SIMPLE_GROUP_SET_CURVE_GFP		 100
-#define EC_F_EC_GFP_SIMPLE_GROUP_SET_GENERATOR		 101
-#define EC_F_EC_GFP_SIMPLE_MAKE_AFFINE			 102
-#define EC_F_EC_GFP_SIMPLE_OCT2POINT			 103
-#define EC_F_EC_GFP_SIMPLE_POINT2OCT			 104
-#define EC_F_EC_GFP_SIMPLE_POINTS_MAKE_AFFINE		 137
-#define EC_F_EC_GFP_SIMPLE_POINT_GET_AFFINE_COORDINATES	 167
-#define EC_F_EC_GFP_SIMPLE_POINT_GET_AFFINE_COORDINATES_GFP 105
-#define EC_F_EC_GFP_SIMPLE_POINT_SET_AFFINE_COORDINATES	 168
-#define EC_F_EC_GFP_SIMPLE_POINT_SET_AFFINE_COORDINATES_GFP 128
-#define EC_F_EC_GFP_SIMPLE_SET_COMPRESSED_COORDINATES	 169
-#define EC_F_EC_GFP_SIMPLE_SET_COMPRESSED_COORDINATES_GFP 129
-#define EC_F_EC_GROUP_CHECK				 170
-#define EC_F_EC_GROUP_CHECK_DISCRIMINANT		 171
-#define EC_F_EC_GROUP_COPY				 106
-#define EC_F_EC_GROUP_GET0_GENERATOR			 139
-#define EC_F_EC_GROUP_GET_COFACTOR			 140
-#define EC_F_EC_GROUP_GET_CURVE_GF2M			 172
-#define EC_F_EC_GROUP_GET_CURVE_GFP			 130
-#define EC_F_EC_GROUP_GET_DEGREE			 173
-#define EC_F_EC_GROUP_GET_ORDER				 141
-#define EC_F_EC_GROUP_GET_PENTANOMIAL_BASIS		 193
-#define EC_F_EC_GROUP_GET_TRINOMIAL_BASIS		 194
-#define EC_F_EC_GROUP_NEW				 108
-#define EC_F_EC_GROUP_NEW_BY_CURVE_NAME			 174
-#define EC_F_EC_GROUP_NEW_FROM_DATA			 175
-#define EC_F_EC_GROUP_PRECOMPUTE_MULT			 142
-#define EC_F_EC_GROUP_SET_CURVE_GF2M			 176
-#define EC_F_EC_GROUP_SET_CURVE_GFP			 109
-#define EC_F_EC_GROUP_SET_EXTRA_DATA			 110
-#define EC_F_EC_GROUP_SET_GENERATOR			 111
-#define EC_F_EC_KEY_CHECK_KEY				 177
-#define EC_F_EC_KEY_COPY				 178
-#define EC_F_EC_KEY_GENERATE_KEY			 179
-#define EC_F_EC_KEY_NEW					 182
-#define EC_F_EC_KEY_PRINT				 180
-#define EC_F_EC_KEY_PRINT_FP				 181
-#define EC_F_EC_POINTS_MAKE_AFFINE			 136
-#define EC_F_EC_POINTS_MUL				 138
-#define EC_F_EC_POINT_ADD				 112
-#define EC_F_EC_POINT_CMP				 113
-#define EC_F_EC_POINT_COPY				 114
-#define EC_F_EC_POINT_DBL				 115
-#define EC_F_EC_POINT_GET_AFFINE_COORDINATES_GF2M	 183
-#define EC_F_EC_POINT_GET_AFFINE_COORDINATES_GFP	 116
-#define EC_F_EC_POINT_GET_JPROJECTIVE_COORDINATES_GFP	 117
-#define EC_F_EC_POINT_INVERT				 210
-#define EC_F_EC_POINT_IS_AT_INFINITY			 118
-#define EC_F_EC_POINT_IS_ON_CURVE			 119
-#define EC_F_EC_POINT_MAKE_AFFINE			 120
-#define EC_F_EC_POINT_MUL				 184
-#define EC_F_EC_POINT_NEW				 121
-#define EC_F_EC_POINT_OCT2POINT				 122
-#define EC_F_EC_POINT_POINT2OCT				 123
-#define EC_F_EC_POINT_SET_AFFINE_COORDINATES_GF2M	 185
-#define EC_F_EC_POINT_SET_AFFINE_COORDINATES_GFP	 124
-#define EC_F_EC_POINT_SET_COMPRESSED_COORDINATES_GF2M	 186
-#define EC_F_EC_POINT_SET_COMPRESSED_COORDINATES_GFP	 125
-#define EC_F_EC_POINT_SET_JPROJECTIVE_COORDINATES_GFP	 126
-#define EC_F_EC_POINT_SET_TO_INFINITY			 127
-#define EC_F_EC_PRE_COMP_DUP				 207
-#define EC_F_EC_WNAF_MUL				 187
-#define EC_F_EC_WNAF_PRECOMPUTE_MULT			 188
-#define EC_F_I2D_ECPARAMETERS				 190
-#define EC_F_I2D_ECPKPARAMETERS				 191
-#define EC_F_I2D_ECPRIVATEKEY				 192
-#define EC_F_I2O_ECPUBLICKEY				 151
-#define EC_F_O2I_ECPUBLICKEY				 152
-
-/* Reason codes. */
-#define EC_R_ASN1_ERROR					 115
-#define EC_R_ASN1_UNKNOWN_FIELD				 116
-#define EC_R_BUFFER_TOO_SMALL				 100
-#define EC_R_D2I_ECPKPARAMETERS_FAILURE			 117
-#define EC_R_DISCRIMINANT_IS_ZERO			 118
-#define EC_R_EC_GROUP_NEW_BY_NAME_FAILURE		 119
-#define EC_R_FIELD_TOO_LARGE				 138
-#define EC_R_GROUP2PKPARAMETERS_FAILURE			 120
-#define EC_R_I2D_ECPKPARAMETERS_FAILURE			 121
-#define EC_R_INCOMPATIBLE_OBJECTS			 101
-#define EC_R_INVALID_ARGUMENT				 112
-#define EC_R_INVALID_COMPRESSED_POINT			 110
-#define EC_R_INVALID_COMPRESSION_BIT			 109
-#define EC_R_INVALID_ENCODING				 102
-#define EC_R_INVALID_FIELD				 103
-#define EC_R_INVALID_FORM				 104
-#define EC_R_INVALID_GROUP_ORDER			 122
-#define EC_R_INVALID_PENTANOMIAL_BASIS			 132
-#define EC_R_INVALID_PRIVATE_KEY			 123
-#define EC_R_INVALID_TRINOMIAL_BASIS			 137
-#define EC_R_MISSING_PARAMETERS				 124
-#define EC_R_MISSING_PRIVATE_KEY			 125
-#define EC_R_NOT_A_NIST_PRIME				 135
-#define EC_R_NOT_A_SUPPORTED_NIST_PRIME			 136
-#define EC_R_NOT_IMPLEMENTED				 126
-#define EC_R_NOT_INITIALIZED				 111
-#define EC_R_NO_FIELD_MOD				 133
-#define EC_R_PASSED_NULL_PARAMETER			 134
-#define EC_R_PKPARAMETERS2GROUP_FAILURE			 127
-#define EC_R_POINT_AT_INFINITY				 106
-#define EC_R_POINT_IS_NOT_ON_CURVE			 107
-#define EC_R_SLOT_FULL					 108
-#define EC_R_UNDEFINED_GENERATOR			 113
-#define EC_R_UNDEFINED_ORDER				 128
-#define EC_R_UNKNOWN_GROUP				 129
-#define EC_R_UNKNOWN_ORDER				 114
-#define EC_R_UNSUPPORTED_FIELD				 131
-#define EC_R_WRONG_ORDER				 130
-
-#ifdef  __cplusplus
-}
-#endif
-#endif
diff --git a/crypto/openssl/crypto/ec/ec2_mult.c b/crypto/openssl/crypto/ec/ec2_mult.c
deleted file mode 100644
index ff368fd7d7b3..000000000000
--- a/crypto/openssl/crypto/ec/ec2_mult.c
+++ /dev/null
@@ -1,380 +0,0 @@
-/* crypto/ec/ec2_mult.c */
-/* ====================================================================
- * Copyright 2002 Sun Microsystems, Inc. ALL RIGHTS RESERVED.
- *
- * The Elliptic Curve Public-Key Crypto Library (ECC Code) included
- * herein is developed by SUN MICROSYSTEMS, INC., and is contributed
- * to the OpenSSL project.
- *
- * The ECC Code is licensed pursuant to the OpenSSL open source
- * license provided below.
- *
- * The software is originally written by Sheueling Chang Shantz and
- * Douglas Stebila of Sun Microsystems Laboratories.
- *
- */
-/* ====================================================================
- * Copyright (c) 1998-2003 The OpenSSL Project.  All rights reserved.
- *
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions
- * are met:
- *
- * 1. Redistributions of source code must retain the above copyright
- *    notice, this list of conditions and the following disclaimer. 
- *
- * 2. Redistributions in binary form must reproduce the above copyright
- *    notice, this list of conditions and the following disclaimer in
- *    the documentation and/or other materials provided with the
- *    distribution.
- *
- * 3. All advertising materials mentioning features or use of this
- *    software must display the following acknowledgment:
- *    "This product includes software developed by the OpenSSL Project
- *    for use in the OpenSSL Toolkit. (http://www.openssl.org/)"
- *
- * 4. The names "OpenSSL Toolkit" and "OpenSSL Project" must not be used to
- *    endorse or promote products derived from this software without
- *    prior written permission. For written permission, please contact
- *    openssl-core@openssl.org.
- *
- * 5. Products derived from this software may not be called "OpenSSL"
- *    nor may "OpenSSL" appear in their names without prior written
- *    permission of the OpenSSL Project.
- *
- * 6. Redistributions of any form whatsoever must retain the following
- *    acknowledgment:
- *    "This product includes software developed by the OpenSSL Project
- *    for use in the OpenSSL Toolkit (http://www.openssl.org/)"
- *
- * THIS SOFTWARE IS PROVIDED BY THE OpenSSL PROJECT ``AS IS'' AND ANY
- * EXPRESSED OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
- * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR
- * PURPOSE ARE DISCLAIMED.  IN NO EVENT SHALL THE OpenSSL PROJECT OR
- * ITS CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
- * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
- * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
- * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
- * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
- * STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
- * ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED
- * OF THE POSSIBILITY OF SUCH DAMAGE.
- * ====================================================================
- *
- * This product includes cryptographic software written by Eric Young
- * (eay@cryptsoft.com).  This product includes software written by Tim
- * Hudson (tjh@cryptsoft.com).
- *
- */
-
-#include <openssl/err.h>
-
-#include "ec_lcl.h"
-
-
-/* Compute the x-coordinate x/z for the point 2*(x/z) in Montgomery projective 
- * coordinates.
- * Uses algorithm Mdouble in appendix of 
- *     Lopez, J. and Dahab, R.  "Fast multiplication on elliptic curves over 
- *     GF(2^m) without precomputation".
- * modified to not require precomputation of c=b^{2^{m-1}}.
- */
-static int gf2m_Mdouble(const EC_GROUP *group, BIGNUM *x, BIGNUM *z, BN_CTX *ctx)
-	{
-	BIGNUM *t1;
-	int ret = 0;
-	
-	/* Since Mdouble is static we can guarantee that ctx != NULL. */
-	BN_CTX_start(ctx);
-	t1 = BN_CTX_get(ctx);
-	if (t1 == NULL) goto err;
-
-	if (!group->meth->field_sqr(group, x, x, ctx)) goto err;
-	if (!group->meth->field_sqr(group, t1, z, ctx)) goto err;
-	if (!group->meth->field_mul(group, z, x, t1, ctx)) goto err;
-	if (!group->meth->field_sqr(group, x, x, ctx)) goto err;
-	if (!group->meth->field_sqr(group, t1, t1, ctx)) goto err;
-	if (!group->meth->field_mul(group, t1, &group->b, t1, ctx)) goto err;
-	if (!BN_GF2m_add(x, x, t1)) goto err;
-
-	ret = 1;
-
- err:
-	BN_CTX_end(ctx);
-	return ret;
-	}
-
-/* Compute the x-coordinate x1/z1 for the point (x1/z1)+(x2/x2) in Montgomery 
- * projective coordinates.
- * Uses algorithm Madd in appendix of 
- *     Lopex, J. and Dahab, R.  "Fast multiplication on elliptic curves over 
- *     GF(2^m) without precomputation".
- */
-static int gf2m_Madd(const EC_GROUP *group, const BIGNUM *x, BIGNUM *x1, BIGNUM *z1, 
-	const BIGNUM *x2, const BIGNUM *z2, BN_CTX *ctx)
-	{
-	BIGNUM *t1, *t2;
-	int ret = 0;
-	
-	/* Since Madd is static we can guarantee that ctx != NULL. */
-	BN_CTX_start(ctx);
-	t1 = BN_CTX_get(ctx);
-	t2 = BN_CTX_get(ctx);
-	if (t2 == NULL) goto err;
-
-	if (!BN_copy(t1, x)) goto err;
-	if (!group->meth->field_mul(group, x1, x1, z2, ctx)) goto err;
-	if (!group->meth->field_mul(group, z1, z1, x2, ctx)) goto err;
-	if (!group->meth->field_mul(group, t2, x1, z1, ctx)) goto err;
-	if (!BN_GF2m_add(z1, z1, x1)) goto err;
-	if (!group->meth->field_sqr(group, z1, z1, ctx)) goto err;
-	if (!group->meth->field_mul(group, x1, z1, t1, ctx)) goto err;
-	if (!BN_GF2m_add(x1, x1, t2)) goto err;
-
-	ret = 1;
-
- err:
-	BN_CTX_end(ctx);
-	return ret;
-	}
-
-/* Compute the x, y affine coordinates from the point (x1, z1) (x2, z2) 
- * using Montgomery point multiplication algorithm Mxy() in appendix of 
- *     Lopex, J. and Dahab, R.  "Fast multiplication on elliptic curves over 
- *     GF(2^m) without precomputation".
- * Returns:
- *     0 on error
- *     1 if return value should be the point at infinity
- *     2 otherwise
- */
-static int gf2m_Mxy(const EC_GROUP *group, const BIGNUM *x, const BIGNUM *y, BIGNUM *x1, 
-	BIGNUM *z1, BIGNUM *x2, BIGNUM *z2, BN_CTX *ctx)
-	{
-	BIGNUM *t3, *t4, *t5;
-	int ret = 0;
-	
-	if (BN_is_zero(z1))
-		{
-		BN_zero(x2);
-		BN_zero(z2);
-		return 1;
-		}
-	
-	if (BN_is_zero(z2))
-		{
-		if (!BN_copy(x2, x)) return 0;
-		if (!BN_GF2m_add(z2, x, y)) return 0;
-		return 2;
-		}
-		
-	/* Since Mxy is static we can guarantee that ctx != NULL. */
-	BN_CTX_start(ctx);
-	t3 = BN_CTX_get(ctx);
-	t4 = BN_CTX_get(ctx);
-	t5 = BN_CTX_get(ctx);
-	if (t5 == NULL) goto err;
-
-	if (!BN_one(t5)) goto err;
-
-	if (!group->meth->field_mul(group, t3, z1, z2, ctx)) goto err;
-
-	if (!group->meth->field_mul(group, z1, z1, x, ctx)) goto err;
-	if (!BN_GF2m_add(z1, z1, x1)) goto err;
-	if (!group->meth->field_mul(group, z2, z2, x, ctx)) goto err;
-	if (!group->meth->field_mul(group, x1, z2, x1, ctx)) goto err;
-	if (!BN_GF2m_add(z2, z2, x2)) goto err;
-
-	if (!group->meth->field_mul(group, z2, z2, z1, ctx)) goto err;
-	if (!group->meth->field_sqr(group, t4, x, ctx)) goto err;
-	if (!BN_GF2m_add(t4, t4, y)) goto err;
-	if (!group->meth->field_mul(group, t4, t4, t3, ctx)) goto err;
-	if (!BN_GF2m_add(t4, t4, z2)) goto err;
-
-	if (!group->meth->field_mul(group, t3, t3, x, ctx)) goto err;
-	if (!group->meth->field_div(group, t3, t5, t3, ctx)) goto err;
-	if (!group->meth->field_mul(group, t4, t3, t4, ctx)) goto err;
-	if (!group->meth->field_mul(group, x2, x1, t3, ctx)) goto err;
-	if (!BN_GF2m_add(z2, x2, x)) goto err;
-
-	if (!group->meth->field_mul(group, z2, z2, t4, ctx)) goto err;
-	if (!BN_GF2m_add(z2, z2, y)) goto err;
-
-	ret = 2;
-
- err:
-	BN_CTX_end(ctx);
-	return ret;
-	}
-
-/* Computes scalar*point and stores the result in r.
- * point can not equal r.
- * Uses algorithm 2P of
- *     Lopex, J. and Dahab, R.  "Fast multiplication on elliptic curves over 
- *     GF(2^m) without precomputation".
- */
-static int ec_GF2m_montgomery_point_multiply(const EC_GROUP *group, EC_POINT *r, const BIGNUM *scalar,
-	const EC_POINT *point, BN_CTX *ctx)
-	{
-	BIGNUM *x1, *x2, *z1, *z2;
-	int ret = 0, i, j;
-	BN_ULONG mask;
-
-	if (r == point)
-		{
-		ECerr(EC_F_EC_GF2M_MONTGOMERY_POINT_MULTIPLY, EC_R_INVALID_ARGUMENT);
-		return 0;
-		}
-	
-	/* if result should be point at infinity */
-	if ((scalar == NULL) || BN_is_zero(scalar) || (point == NULL) || 
-		EC_POINT_is_at_infinity(group, point))
-		{
-		return EC_POINT_set_to_infinity(group, r);
-		}
-
-	/* only support affine coordinates */
-	if (!point->Z_is_one) return 0;
-
-	/* Since point_multiply is static we can guarantee that ctx != NULL. */
-	BN_CTX_start(ctx);
-	x1 = BN_CTX_get(ctx);
-	z1 = BN_CTX_get(ctx);
-	if (z1 == NULL) goto err;
-
-	x2 = &r->X;
-	z2 = &r->Y;
-
-	if (!BN_GF2m_mod_arr(x1, &point->X, group->poly)) goto err; /* x1 = x */
-	if (!BN_one(z1)) goto err; /* z1 = 1 */
-	if (!group->meth->field_sqr(group, z2, x1, ctx)) goto err; /* z2 = x1^2 = x^2 */
-	if (!group->meth->field_sqr(group, x2, z2, ctx)) goto err;
-	if (!BN_GF2m_add(x2, x2, &group->b)) goto err; /* x2 = x^4 + b */
-
-	/* find top most bit and go one past it */
-	i = scalar->top - 1; j = BN_BITS2 - 1;
-	mask = BN_TBIT;
-	while (!(scalar->d[i] & mask)) { mask >>= 1; j--; }
-	mask >>= 1; j--;
-	/* if top most bit was at word break, go to next word */
-	if (!mask) 
-		{
-		i--; j = BN_BITS2 - 1;
-		mask = BN_TBIT;
-		}
-
-	for (; i >= 0; i--)
-		{
-		for (; j >= 0; j--)
-			{
-			if (scalar->d[i] & mask)
-				{
-				if (!gf2m_Madd(group, &point->X, x1, z1, x2, z2, ctx)) goto err;
-				if (!gf2m_Mdouble(group, x2, z2, ctx)) goto err;
-				}
-			else
-				{
-				if (!gf2m_Madd(group, &point->X, x2, z2, x1, z1, ctx)) goto err;
-				if (!gf2m_Mdouble(group, x1, z1, ctx)) goto err;
-				}
-			mask >>= 1;
-			}
-		j = BN_BITS2 - 1;
-		mask = BN_TBIT;
-		}
-
-	/* convert out of "projective" coordinates */
-	i = gf2m_Mxy(group, &point->X, &point->Y, x1, z1, x2, z2, ctx);
-	if (i == 0) goto err;
-	else if (i == 1) 
-		{
-		if (!EC_POINT_set_to_infinity(group, r)) goto err;
-		}
-	else
-		{
-		if (!BN_one(&r->Z)) goto err;
-		r->Z_is_one = 1;
-		}
-
-	/* GF(2^m) field elements should always have BIGNUM::neg = 0 */
-	BN_set_negative(&r->X, 0);
-	BN_set_negative(&r->Y, 0);
-
-	ret = 1;
-
- err:
-	BN_CTX_end(ctx);
-	return ret;
-	}
-
-
-/* Computes the sum
- *     scalar*group->generator + scalars[0]*points[0] + ... + scalars[num-1]*points[num-1]
- * gracefully ignoring NULL scalar values.
- */
-int ec_GF2m_simple_mul(const EC_GROUP *group, EC_POINT *r, const BIGNUM *scalar,
-	size_t num, const EC_POINT *points[], const BIGNUM *scalars[], BN_CTX *ctx)
-	{
-	BN_CTX *new_ctx = NULL;
-	int ret = 0;
-	size_t i;
-	EC_POINT *p=NULL;
-
-	if (ctx == NULL)
-		{
-		ctx = new_ctx = BN_CTX_new();
-		if (ctx == NULL)
-			return 0;
-		}
-
-	/* This implementation is more efficient than the wNAF implementation for 2
-	 * or fewer points.  Use the ec_wNAF_mul implementation for 3 or more points,
-	 * or if we can perform a fast multiplication based on precomputation.
-	 */
-	if ((scalar && (num > 1)) || (num > 2) || (num == 0 && EC_GROUP_have_precompute_mult(group)))
-		{
-		ret = ec_wNAF_mul(group, r, scalar, num, points, scalars, ctx);
-		goto err;
-		}
-
-	if ((p = EC_POINT_new(group)) == NULL) goto err;
-
-	if (!EC_POINT_set_to_infinity(group, r)) goto err;
-
-	if (scalar)
-		{
-		if (!ec_GF2m_montgomery_point_multiply(group, p, scalar, group->generator, ctx)) goto err;
-		if (BN_is_negative(scalar)) 
-			if (!group->meth->invert(group, p, ctx)) goto err;
-		if (!group->meth->add(group, r, r, p, ctx)) goto err;
-		}
-
-	for (i = 0; i < num; i++)
-		{
-		if (!ec_GF2m_montgomery_point_multiply(group, p, scalars[i], points[i], ctx)) goto err;
-		if (BN_is_negative(scalars[i]))
-			if (!group->meth->invert(group, p, ctx)) goto err;
-		if (!group->meth->add(group, r, r, p, ctx)) goto err;
-		}
-
-	ret = 1;
-
-  err:
-	if (p) EC_POINT_free(p);
-	if (new_ctx != NULL)
-		BN_CTX_free(new_ctx);
-	return ret;
-	}
-
-
-/* Precomputation for point multiplication: fall back to wNAF methods
- * because ec_GF2m_simple_mul() uses ec_wNAF_mul() if appropriate */
-
-int ec_GF2m_precompute_mult(EC_GROUP *group, BN_CTX *ctx)
-	{
-	return ec_wNAF_precompute_mult(group, ctx);
- 	}
-
-int ec_GF2m_have_precompute_mult(const EC_GROUP *group)
-	{
-	return ec_wNAF_have_precompute_mult(group);
- 	}
diff --git a/crypto/openssl/crypto/ec/ec2_smpl.c b/crypto/openssl/crypto/ec/ec2_smpl.c
deleted file mode 100644
index 5cd1eac41fc3..000000000000
--- a/crypto/openssl/crypto/ec/ec2_smpl.c
+++ /dev/null
@@ -1,971 +0,0 @@
-/* crypto/ec/ec2_smpl.c */
-/* ====================================================================
- * Copyright 2002 Sun Microsystems, Inc. ALL RIGHTS RESERVED.
- *
- * The Elliptic Curve Public-Key Crypto Library (ECC Code) included
- * herein is developed by SUN MICROSYSTEMS, INC., and is contributed
- * to the OpenSSL project.
- *
- * The ECC Code is licensed pursuant to the OpenSSL open source
- * license provided below.
- *
- * The software is originally written by Sheueling Chang Shantz and
- * Douglas Stebila of Sun Microsystems Laboratories.
- *
- */
-/* ====================================================================
- * Copyright (c) 1998-2003 The OpenSSL Project.  All rights reserved.
- *
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions
- * are met:
- *
- * 1. Redistributions of source code must retain the above copyright
- *    notice, this list of conditions and the following disclaimer. 
- *
- * 2. Redistributions in binary form must reproduce the above copyright
- *    notice, this list of conditions and the following disclaimer in
- *    the documentation and/or other materials provided with the
- *    distribution.
- *
- * 3. All advertising materials mentioning features or use of this
- *    software must display the following acknowledgment:
- *    "This product includes software developed by the OpenSSL Project
- *    for use in the OpenSSL Toolkit. (http://www.openssl.org/)"
- *
- * 4. The names "OpenSSL Toolkit" and "OpenSSL Project" must not be used to
- *    endorse or promote products derived from this software without
- *    prior written permission. For written permission, please contact
- *    openssl-core@openssl.org.
- *
- * 5. Products derived from this software may not be called "OpenSSL"
- *    nor may "OpenSSL" appear in their names without prior written
- *    permission of the OpenSSL Project.
- *
- * 6. Redistributions of any form whatsoever must retain the following
- *    acknowledgment:
- *    "This product includes software developed by the OpenSSL Project
- *    for use in the OpenSSL Toolkit (http://www.openssl.org/)"
- *
- * THIS SOFTWARE IS PROVIDED BY THE OpenSSL PROJECT ``AS IS'' AND ANY
- * EXPRESSED OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
- * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR
- * PURPOSE ARE DISCLAIMED.  IN NO EVENT SHALL THE OpenSSL PROJECT OR
- * ITS CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
- * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
- * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
- * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
- * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
- * STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
- * ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED
- * OF THE POSSIBILITY OF SUCH DAMAGE.
- * ====================================================================
- *
- * This product includes cryptographic software written by Eric Young
- * (eay@cryptsoft.com).  This product includes software written by Tim
- * Hudson (tjh@cryptsoft.com).
- *
- */
-
-#include <openssl/err.h>
-
-#include "ec_lcl.h"
-
-
-const EC_METHOD *EC_GF2m_simple_method(void)
-	{
-	static const EC_METHOD ret = {
-		NID_X9_62_characteristic_two_field,
-		ec_GF2m_simple_group_init,
-		ec_GF2m_simple_group_finish,
-		ec_GF2m_simple_group_clear_finish,
-		ec_GF2m_simple_group_copy,
-		ec_GF2m_simple_group_set_curve,
-		ec_GF2m_simple_group_get_curve,
-		ec_GF2m_simple_group_get_degree,
-		ec_GF2m_simple_group_check_discriminant,
-		ec_GF2m_simple_point_init,
-		ec_GF2m_simple_point_finish,
-		ec_GF2m_simple_point_clear_finish,
-		ec_GF2m_simple_point_copy,
-		ec_GF2m_simple_point_set_to_infinity,
-		0 /* set_Jprojective_coordinates_GFp */,
-		0 /* get_Jprojective_coordinates_GFp */,
-		ec_GF2m_simple_point_set_affine_coordinates,
-		ec_GF2m_simple_point_get_affine_coordinates,
-		ec_GF2m_simple_set_compressed_coordinates,
-		ec_GF2m_simple_point2oct,
-		ec_GF2m_simple_oct2point,
-		ec_GF2m_simple_add,
-		ec_GF2m_simple_dbl,
-		ec_GF2m_simple_invert,
-		ec_GF2m_simple_is_at_infinity,
-		ec_GF2m_simple_is_on_curve,
-		ec_GF2m_simple_cmp,
-		ec_GF2m_simple_make_affine,
-		ec_GF2m_simple_points_make_affine,
-
-		/* the following three method functions are defined in ec2_mult.c */
-		ec_GF2m_simple_mul,
-		ec_GF2m_precompute_mult,
-		ec_GF2m_have_precompute_mult,
-
-		ec_GF2m_simple_field_mul,
-		ec_GF2m_simple_field_sqr,
-		ec_GF2m_simple_field_div,
-		0 /* field_encode */,
-		0 /* field_decode */,
-		0 /* field_set_to_one */ };
-
-	return &ret;
-	}
-
-
-/* Initialize a GF(2^m)-based EC_GROUP structure.
- * Note that all other members are handled by EC_GROUP_new.
- */
-int ec_GF2m_simple_group_init(EC_GROUP *group)
-	{
-	BN_init(&group->field);
-	BN_init(&group->a);
-	BN_init(&group->b);
-	return 1;
-	}
-
-
-/* Free a GF(2^m)-based EC_GROUP structure.
- * Note that all other members are handled by EC_GROUP_free.
- */
-void ec_GF2m_simple_group_finish(EC_GROUP *group)
-	{
-	BN_free(&group->field);
-	BN_free(&group->a);
-	BN_free(&group->b);
-	}
-
-
-/* Clear and free a GF(2^m)-based EC_GROUP structure.
- * Note that all other members are handled by EC_GROUP_clear_free.
- */
-void ec_GF2m_simple_group_clear_finish(EC_GROUP *group)
-	{
-	BN_clear_free(&group->field);
-	BN_clear_free(&group->a);
-	BN_clear_free(&group->b);
-	group->poly[0] = 0;
-	group->poly[1] = 0;
-	group->poly[2] = 0;
-	group->poly[3] = 0;
-	group->poly[4] = 0;
-	}
-
-
-/* Copy a GF(2^m)-based EC_GROUP structure.
- * Note that all other members are handled by EC_GROUP_copy.
- */
-int ec_GF2m_simple_group_copy(EC_GROUP *dest, const EC_GROUP *src)
-	{
-	int i;
-	if (!BN_copy(&dest->field, &src->field)) return 0;
-	if (!BN_copy(&dest->a, &src->a)) return 0;
-	if (!BN_copy(&dest->b, &src->b)) return 0;
-	dest->poly[0] = src->poly[0];
-	dest->poly[1] = src->poly[1];
-	dest->poly[2] = src->poly[2];
-	dest->poly[3] = src->poly[3];
-	dest->poly[4] = src->poly[4];
-	bn_wexpand(&dest->a, (int)(dest->poly[0] + BN_BITS2 - 1) / BN_BITS2);
-	bn_wexpand(&dest->b, (int)(dest->poly[0] + BN_BITS2 - 1) / BN_BITS2);
-	for (i = dest->a.top; i < dest->a.dmax; i++) dest->a.d[i] = 0;
-	for (i = dest->b.top; i < dest->b.dmax; i++) dest->b.d[i] = 0;
-	return 1;
-	}
-
-
-/* Set the curve parameters of an EC_GROUP structure. */
-int ec_GF2m_simple_group_set_curve(EC_GROUP *group,
-	const BIGNUM *p, const BIGNUM *a, const BIGNUM *b, BN_CTX *ctx)
-	{
-	int ret = 0, i;
-
-	/* group->field */
-	if (!BN_copy(&group->field, p)) goto err;
-	i = BN_GF2m_poly2arr(&group->field, group->poly, 5);
-	if ((i != 5) && (i != 3))
-		{
-		ECerr(EC_F_EC_GF2M_SIMPLE_GROUP_SET_CURVE, EC_R_UNSUPPORTED_FIELD);
-		goto err;
-		}
-
-	/* group->a */
-	if (!BN_GF2m_mod_arr(&group->a, a, group->poly)) goto err;
-	bn_wexpand(&group->a, (int)(group->poly[0] + BN_BITS2 - 1) / BN_BITS2);
-	for (i = group->a.top; i < group->a.dmax; i++) group->a.d[i] = 0;
-	
-	/* group->b */
-	if (!BN_GF2m_mod_arr(&group->b, b, group->poly)) goto err;
-	bn_wexpand(&group->b, (int)(group->poly[0] + BN_BITS2 - 1) / BN_BITS2);
-	for (i = group->b.top; i < group->b.dmax; i++) group->b.d[i] = 0;
-		
-	ret = 1;
-  err:
-	return ret;
-	}
-
-
-/* Get the curve parameters of an EC_GROUP structure.
- * If p, a, or b are NULL then there values will not be set but the method will return with success.
- */
-int ec_GF2m_simple_group_get_curve(const EC_GROUP *group, BIGNUM *p, BIGNUM *a, BIGNUM *b, BN_CTX *ctx)
-	{
-	int ret = 0;
-	
-	if (p != NULL)
-		{
-		if (!BN_copy(p, &group->field)) return 0;
-		}
-
-	if (a != NULL)
-		{
-		if (!BN_copy(a, &group->a)) goto err;
-		}
-
-	if (b != NULL)
-		{
-		if (!BN_copy(b, &group->b)) goto err;
-		}
-	
-	ret = 1;
-	
-  err:
-	return ret;
-	}
-
-
-/* Gets the degree of the field.  For a curve over GF(2^m) this is the value m. */
-int ec_GF2m_simple_group_get_degree(const EC_GROUP *group)
-	{
-	return BN_num_bits(&group->field)-1;
-	}
-
-
-/* Checks the discriminant of the curve.
- * y^2 + x*y = x^3 + a*x^2 + b is an elliptic curve <=> b != 0 (mod p) 
- */
-int ec_GF2m_simple_group_check_discriminant(const EC_GROUP *group, BN_CTX *ctx)
-	{
-	int ret = 0;
-	BIGNUM *b;
-	BN_CTX *new_ctx = NULL;
-
-	if (ctx == NULL)
-		{
-		ctx = new_ctx = BN_CTX_new();
-		if (ctx == NULL)
-			{
-			ECerr(EC_F_EC_GF2M_SIMPLE_GROUP_CHECK_DISCRIMINANT, ERR_R_MALLOC_FAILURE);
-			goto err;
-			}
-		}
-	BN_CTX_start(ctx);
-	b = BN_CTX_get(ctx);
-	if (b == NULL) goto err;
-
-	if (!BN_GF2m_mod_arr(b, &group->b, group->poly)) goto err;
-	
-	/* check the discriminant:
-	 * y^2 + x*y = x^3 + a*x^2 + b is an elliptic curve <=> b != 0 (mod p) 
-	 */
-	if (BN_is_zero(b)) goto err;
-
-	ret = 1;
-
-err:
-	if (ctx != NULL)
-		BN_CTX_end(ctx);
-	if (new_ctx != NULL)
-		BN_CTX_free(new_ctx);
-	return ret;
-	}
-
-
-/* Initializes an EC_POINT. */
-int ec_GF2m_simple_point_init(EC_POINT *point)
-	{
-	BN_init(&point->X);
-	BN_init(&point->Y);
-	BN_init(&point->Z);
-	return 1;
-	}
-
-
-/* Frees an EC_POINT. */
-void ec_GF2m_simple_point_finish(EC_POINT *point)
-	{
-	BN_free(&point->X);
-	BN_free(&point->Y);
-	BN_free(&point->Z);
-	}
-
-
-/* Clears and frees an EC_POINT. */
-void ec_GF2m_simple_point_clear_finish(EC_POINT *point)
-	{
-	BN_clear_free(&point->X);
-	BN_clear_free(&point->Y);
-	BN_clear_free(&point->Z);
-	point->Z_is_one = 0;
-	}
-
-
-/* Copy the contents of one EC_POINT into another.  Assumes dest is initialized. */
-int ec_GF2m_simple_point_copy(EC_POINT *dest, const EC_POINT *src)
-	{
-	if (!BN_copy(&dest->X, &src->X)) return 0;
-	if (!BN_copy(&dest->Y, &src->Y)) return 0;
-	if (!BN_copy(&dest->Z, &src->Z)) return 0;
-	dest->Z_is_one = src->Z_is_one;
-
-	return 1;
-	}
-
-
-/* Set an EC_POINT to the point at infinity.  
- * A point at infinity is represented by having Z=0.
- */
-int ec_GF2m_simple_point_set_to_infinity(const EC_GROUP *group, EC_POINT *point)
-	{
-	point->Z_is_one = 0;
-	BN_zero(&point->Z);
-	return 1;
-	}
-
-
-/* Set the coordinates of an EC_POINT using affine coordinates. 
- * Note that the simple implementation only uses affine coordinates.
- */
-int ec_GF2m_simple_point_set_affine_coordinates(const EC_GROUP *group, EC_POINT *point,
-	const BIGNUM *x, const BIGNUM *y, BN_CTX *ctx)
-	{
-	int ret = 0;	
-	if (x == NULL || y == NULL)
-		{
-		ECerr(EC_F_EC_GF2M_SIMPLE_POINT_SET_AFFINE_COORDINATES, ERR_R_PASSED_NULL_PARAMETER);
-		return 0;
-		}
-
-	if (!BN_copy(&point->X, x)) goto err;
-	BN_set_negative(&point->X, 0);
-	if (!BN_copy(&point->Y, y)) goto err;
-	BN_set_negative(&point->Y, 0);
-	if (!BN_copy(&point->Z, BN_value_one())) goto err;
-	BN_set_negative(&point->Z, 0);
-	point->Z_is_one = 1;
-	ret = 1;
-
-  err:
-	return ret;
-	}
-
-
-/* Gets the affine coordinates of an EC_POINT. 
- * Note that the simple implementation only uses affine coordinates.
- */
-int ec_GF2m_simple_point_get_affine_coordinates(const EC_GROUP *group, const EC_POINT *point,
-	BIGNUM *x, BIGNUM *y, BN_CTX *ctx)
-	{
-	int ret = 0;
-
-	if (EC_POINT_is_at_infinity(group, point))
-		{
-		ECerr(EC_F_EC_GF2M_SIMPLE_POINT_GET_AFFINE_COORDINATES, EC_R_POINT_AT_INFINITY);
-		return 0;
-		}
-
-	if (BN_cmp(&point->Z, BN_value_one())) 
-		{
-		ECerr(EC_F_EC_GF2M_SIMPLE_POINT_GET_AFFINE_COORDINATES, ERR_R_SHOULD_NOT_HAVE_BEEN_CALLED);
-		return 0;
-		}
-	if (x != NULL)
-		{
-		if (!BN_copy(x, &point->X)) goto err;
-		BN_set_negative(x, 0);
-		}
-	if (y != NULL)
-		{
-		if (!BN_copy(y, &point->Y)) goto err;
-		BN_set_negative(y, 0);
-		}
-	ret = 1;
-		
- err:
-	return ret;
-	}
-
-
-/* Include patented algorithms. */
-#include "ec2_smpt.c"
-
-
-/* Converts an EC_POINT to an octet string.  
- * If buf is NULL, the encoded length will be returned.
- * If the length len of buf is smaller than required an error will be returned.
- *
- * The point compression section of this function is patented by Certicom Corp. 
- * under US Patent 6,141,420.  Point compression is disabled by default and can 
- * be enabled by defining the preprocessor macro OPENSSL_EC_BIN_PT_COMP at 
- * Configure-time.
- */
-size_t ec_GF2m_simple_point2oct(const EC_GROUP *group, const EC_POINT *point, point_conversion_form_t form,
-	unsigned char *buf, size_t len, BN_CTX *ctx)
-	{
-	size_t ret;
-	BN_CTX *new_ctx = NULL;
-	int used_ctx = 0;
-	BIGNUM *x, *y, *yxi;
-	size_t field_len, i, skip;
-
-#ifndef OPENSSL_EC_BIN_PT_COMP
-	if ((form == POINT_CONVERSION_COMPRESSED) || (form == POINT_CONVERSION_HYBRID)) 
-		{
-		ECerr(EC_F_EC_GF2M_SIMPLE_POINT2OCT, ERR_R_DISABLED);
-		goto err;
-		}
-#endif
-
-	if ((form != POINT_CONVERSION_COMPRESSED)
-		&& (form != POINT_CONVERSION_UNCOMPRESSED)
-		&& (form != POINT_CONVERSION_HYBRID))
-		{
-		ECerr(EC_F_EC_GF2M_SIMPLE_POINT2OCT, EC_R_INVALID_FORM);
-		goto err;
-		}
-
-	if (EC_POINT_is_at_infinity(group, point))
-		{
-		/* encodes to a single 0 octet */
-		if (buf != NULL)
-			{
-			if (len < 1)
-				{
-				ECerr(EC_F_EC_GF2M_SIMPLE_POINT2OCT, EC_R_BUFFER_TOO_SMALL);
-				return 0;
-				}
-			buf[0] = 0;
-			}
-		return 1;
-		}
-
-
-	/* ret := required output buffer length */
-	field_len = (EC_GROUP_get_degree(group) + 7) / 8;
-	ret = (form == POINT_CONVERSION_COMPRESSED) ? 1 + field_len : 1 + 2*field_len;
-
-	/* if 'buf' is NULL, just return required length */
-	if (buf != NULL)
-		{
-		if (len < ret)
-			{
-			ECerr(EC_F_EC_GF2M_SIMPLE_POINT2OCT, EC_R_BUFFER_TOO_SMALL);
-			goto err;
-			}
-
-		if (ctx == NULL)
-			{
-			ctx = new_ctx = BN_CTX_new();
-			if (ctx == NULL)
-				return 0;
-			}
-
-		BN_CTX_start(ctx);
-		used_ctx = 1;
-		x = BN_CTX_get(ctx);
-		y = BN_CTX_get(ctx);
-		yxi = BN_CTX_get(ctx);
-		if (yxi == NULL) goto err;
-
-		if (!EC_POINT_get_affine_coordinates_GF2m(group, point, x, y, ctx)) goto err;
-
-		buf[0] = form;
-#ifdef OPENSSL_EC_BIN_PT_COMP
-		if ((form != POINT_CONVERSION_UNCOMPRESSED) && !BN_is_zero(x))
-			{
-			if (!group->meth->field_div(group, yxi, y, x, ctx)) goto err;
-			if (BN_is_odd(yxi)) buf[0]++;
-			}
-#endif
-
-		i = 1;
-		
-		skip = field_len - BN_num_bytes(x);
-		if (skip > field_len)
-			{
-			ECerr(EC_F_EC_GF2M_SIMPLE_POINT2OCT, ERR_R_INTERNAL_ERROR);
-			goto err;
-			}
-		while (skip > 0)
-			{
-			buf[i++] = 0;
-			skip--;
-			}
-		skip = BN_bn2bin(x, buf + i);
-		i += skip;
-		if (i != 1 + field_len)
-			{
-			ECerr(EC_F_EC_GF2M_SIMPLE_POINT2OCT, ERR_R_INTERNAL_ERROR);
-			goto err;
-			}
-
-		if (form == POINT_CONVERSION_UNCOMPRESSED || form == POINT_CONVERSION_HYBRID)
-			{
-			skip = field_len - BN_num_bytes(y);
-			if (skip > field_len)
-				{
-				ECerr(EC_F_EC_GF2M_SIMPLE_POINT2OCT, ERR_R_INTERNAL_ERROR);
-				goto err;
-				}
-			while (skip > 0)
-				{
-				buf[i++] = 0;
-				skip--;
-				}
-			skip = BN_bn2bin(y, buf + i);
-			i += skip;
-			}
-
-		if (i != ret)
-			{
-			ECerr(EC_F_EC_GF2M_SIMPLE_POINT2OCT, ERR_R_INTERNAL_ERROR);
-			goto err;
-			}
-		}
-	
-	if (used_ctx)
-		BN_CTX_end(ctx);
-	if (new_ctx != NULL)
-		BN_CTX_free(new_ctx);
-	return ret;
-
- err:
-	if (used_ctx)
-		BN_CTX_end(ctx);
-	if (new_ctx != NULL)
-		BN_CTX_free(new_ctx);
-	return 0;
-	}
-
-
-/* Converts an octet string representation to an EC_POINT. 
- * Note that the simple implementation only uses affine coordinates.
- */
-int ec_GF2m_simple_oct2point(const EC_GROUP *group, EC_POINT *point,
-	const unsigned char *buf, size_t len, BN_CTX *ctx)
-	{
-	point_conversion_form_t form;
-	int y_bit;
-	BN_CTX *new_ctx = NULL;
-	BIGNUM *x, *y, *yxi;
-	size_t field_len, enc_len;
-	int ret = 0;
-
-	if (len == 0)
-		{
-		ECerr(EC_F_EC_GF2M_SIMPLE_OCT2POINT, EC_R_BUFFER_TOO_SMALL);
-		return 0;
-		}
-	form = buf[0];
-	y_bit = form & 1;
-	form = form & ~1U;
-	if ((form != 0)	&& (form != POINT_CONVERSION_COMPRESSED)
-		&& (form != POINT_CONVERSION_UNCOMPRESSED)
-		&& (form != POINT_CONVERSION_HYBRID))
-		{
-		ECerr(EC_F_EC_GF2M_SIMPLE_OCT2POINT, EC_R_INVALID_ENCODING);
-		return 0;
-		}
-	if ((form == 0 || form == POINT_CONVERSION_UNCOMPRESSED) && y_bit)
-		{
-		ECerr(EC_F_EC_GF2M_SIMPLE_OCT2POINT, EC_R_INVALID_ENCODING);
-		return 0;
-		}
-
-	if (form == 0)
-		{
-		if (len != 1)
-			{
-			ECerr(EC_F_EC_GF2M_SIMPLE_OCT2POINT, EC_R_INVALID_ENCODING);
-			return 0;
-			}
-
-		return EC_POINT_set_to_infinity(group, point);
-		}
-	
-	field_len = (EC_GROUP_get_degree(group) + 7) / 8;
-	enc_len = (form == POINT_CONVERSION_COMPRESSED) ? 1 + field_len : 1 + 2*field_len;
-
-	if (len != enc_len)
-		{
-		ECerr(EC_F_EC_GF2M_SIMPLE_OCT2POINT, EC_R_INVALID_ENCODING);
-		return 0;
-		}
-
-	if (ctx == NULL)
-		{
-		ctx = new_ctx = BN_CTX_new();
-		if (ctx == NULL)
-			return 0;
-		}
-
-	BN_CTX_start(ctx);
-	x = BN_CTX_get(ctx);
-	y = BN_CTX_get(ctx);
-	yxi = BN_CTX_get(ctx);
-	if (yxi == NULL) goto err;
-
-	if (!BN_bin2bn(buf + 1, field_len, x)) goto err;
-	if (BN_ucmp(x, &group->field) >= 0)
-		{
-		ECerr(EC_F_EC_GF2M_SIMPLE_OCT2POINT, EC_R_INVALID_ENCODING);
-		goto err;
-		}
-
-	if (form == POINT_CONVERSION_COMPRESSED)
-		{
-		if (!EC_POINT_set_compressed_coordinates_GF2m(group, point, x, y_bit, ctx)) goto err;
-		}
-	else
-		{
-		if (!BN_bin2bn(buf + 1 + field_len, field_len, y)) goto err;
-		if (BN_ucmp(y, &group->field) >= 0)
-			{
-			ECerr(EC_F_EC_GF2M_SIMPLE_OCT2POINT, EC_R_INVALID_ENCODING);
-			goto err;
-			}
-		if (form == POINT_CONVERSION_HYBRID)
-			{
-			if (!group->meth->field_div(group, yxi, y, x, ctx)) goto err;
-			if (y_bit != BN_is_odd(yxi))
-				{
-				ECerr(EC_F_EC_GF2M_SIMPLE_OCT2POINT, EC_R_INVALID_ENCODING);
-				goto err;
-				}
-			}
-
-		if (!EC_POINT_set_affine_coordinates_GF2m(group, point, x, y, ctx)) goto err;
-		}
-	
-	if (!EC_POINT_is_on_curve(group, point, ctx)) /* test required by X9.62 */
-		{
-		ECerr(EC_F_EC_GF2M_SIMPLE_OCT2POINT, EC_R_POINT_IS_NOT_ON_CURVE);
-		goto err;
-		}
-
-	ret = 1;
-	
- err:
-	BN_CTX_end(ctx);
-	if (new_ctx != NULL)
-		BN_CTX_free(new_ctx);
-	return ret;
-	}
-
-
-/* Computes a + b and stores the result in r.  r could be a or b, a could be b.
- * Uses algorithm A.10.2 of IEEE P1363.
- */
-int ec_GF2m_simple_add(const EC_GROUP *group, EC_POINT *r, const EC_POINT *a, const EC_POINT *b, BN_CTX *ctx)
-	{
-	BN_CTX *new_ctx = NULL;
-	BIGNUM *x0, *y0, *x1, *y1, *x2, *y2, *s, *t;
-	int ret = 0;
-	
-	if (EC_POINT_is_at_infinity(group, a))
-		{
-		if (!EC_POINT_copy(r, b)) return 0;
-		return 1;
-		}
-
-	if (EC_POINT_is_at_infinity(group, b))
-		{
-		if (!EC_POINT_copy(r, a)) return 0;
-		return 1;
-		}
-
-	if (ctx == NULL)
-		{
-		ctx = new_ctx = BN_CTX_new();
-		if (ctx == NULL)
-			return 0;
-		}
-
-	BN_CTX_start(ctx);
-	x0 = BN_CTX_get(ctx);
-	y0 = BN_CTX_get(ctx);
-	x1 = BN_CTX_get(ctx);
-	y1 = BN_CTX_get(ctx);
-	x2 = BN_CTX_get(ctx);
-	y2 = BN_CTX_get(ctx);
-	s = BN_CTX_get(ctx);
-	t = BN_CTX_get(ctx);
-	if (t == NULL) goto err;
-
-	if (a->Z_is_one) 
-		{
-		if (!BN_copy(x0, &a->X)) goto err;
-		if (!BN_copy(y0, &a->Y)) goto err;
-		}
-	else
-		{
-		if (!EC_POINT_get_affine_coordinates_GF2m(group, a, x0, y0, ctx)) goto err;
-		}
-	if (b->Z_is_one) 
-		{
-		if (!BN_copy(x1, &b->X)) goto err;
-		if (!BN_copy(y1, &b->Y)) goto err;
-		}
-	else
-		{
-		if (!EC_POINT_get_affine_coordinates_GF2m(group, b, x1, y1, ctx)) goto err;
-		}
-
-
-	if (BN_GF2m_cmp(x0, x1))
-		{
-		if (!BN_GF2m_add(t, x0, x1)) goto err;
-		if (!BN_GF2m_add(s, y0, y1)) goto err;
-		if (!group->meth->field_div(group, s, s, t, ctx)) goto err;
-		if (!group->meth->field_sqr(group, x2, s, ctx)) goto err;
-		if (!BN_GF2m_add(x2, x2, &group->a)) goto err;
-		if (!BN_GF2m_add(x2, x2, s)) goto err;
-		if (!BN_GF2m_add(x2, x2, t)) goto err;
-		}
-	else
-		{
-		if (BN_GF2m_cmp(y0, y1) || BN_is_zero(x1))
-			{
-			if (!EC_POINT_set_to_infinity(group, r)) goto err;
-			ret = 1;
-			goto err;
-			}
-		if (!group->meth->field_div(group, s, y1, x1, ctx)) goto err;
-		if (!BN_GF2m_add(s, s, x1)) goto err;
-		
-		if (!group->meth->field_sqr(group, x2, s, ctx)) goto err;
-		if (!BN_GF2m_add(x2, x2, s)) goto err;
-		if (!BN_GF2m_add(x2, x2, &group->a)) goto err;
-		}
-
-	if (!BN_GF2m_add(y2, x1, x2)) goto err;
-	if (!group->meth->field_mul(group, y2, y2, s, ctx)) goto err;
-	if (!BN_GF2m_add(y2, y2, x2)) goto err;
-	if (!BN_GF2m_add(y2, y2, y1)) goto err;
-
-	if (!EC_POINT_set_affine_coordinates_GF2m(group, r, x2, y2, ctx)) goto err;
-
-	ret = 1;
-
- err:
-	BN_CTX_end(ctx);
-	if (new_ctx != NULL)
-		BN_CTX_free(new_ctx);
-	return ret;
-	}
-
-
-/* Computes 2 * a and stores the result in r.  r could be a.
- * Uses algorithm A.10.2 of IEEE P1363.
- */
-int ec_GF2m_simple_dbl(const EC_GROUP *group, EC_POINT *r, const EC_POINT *a, BN_CTX *ctx)
-	{
-	return ec_GF2m_simple_add(group, r, a, a, ctx);
-	}
-
-
-int ec_GF2m_simple_invert(const EC_GROUP *group, EC_POINT *point, BN_CTX *ctx)
-	{
-	if (EC_POINT_is_at_infinity(group, point) || BN_is_zero(&point->Y))
-		/* point is its own inverse */
-		return 1;
-	
-	if (!EC_POINT_make_affine(group, point, ctx)) return 0;
-	return BN_GF2m_add(&point->Y, &point->X, &point->Y);
-	}
-
-
-/* Indicates whether the given point is the point at infinity. */
-int ec_GF2m_simple_is_at_infinity(const EC_GROUP *group, const EC_POINT *point)
-	{
-	return BN_is_zero(&point->Z);
-	}
-
-
-/* Determines whether the given EC_POINT is an actual point on the curve defined
- * in the EC_GROUP.  A point is valid if it satisfies the Weierstrass equation:
- *      y^2 + x*y = x^3 + a*x^2 + b.
- */
-int ec_GF2m_simple_is_on_curve(const EC_GROUP *group, const EC_POINT *point, BN_CTX *ctx)
-	{
-	int ret = -1;
-	BN_CTX *new_ctx = NULL;
-	BIGNUM *lh, *y2;
-	int (*field_mul)(const EC_GROUP *, BIGNUM *, const BIGNUM *, const BIGNUM *, BN_CTX *);
-	int (*field_sqr)(const EC_GROUP *, BIGNUM *, const BIGNUM *, BN_CTX *);
-
-	if (EC_POINT_is_at_infinity(group, point))
-		return 1;
-
-	field_mul = group->meth->field_mul;
-	field_sqr = group->meth->field_sqr;	
-
-	/* only support affine coordinates */
-	if (!point->Z_is_one) goto err;
-
-	if (ctx == NULL)
-		{
-		ctx = new_ctx = BN_CTX_new();
-		if (ctx == NULL)
-			return -1;
-		}
-
-	BN_CTX_start(ctx);
-	y2 = BN_CTX_get(ctx);
-	lh = BN_CTX_get(ctx);
-	if (lh == NULL) goto err;
-
-	/* We have a curve defined by a Weierstrass equation
-	 *      y^2 + x*y = x^3 + a*x^2 + b.
-	 *  <=> x^3 + a*x^2 + x*y + b + y^2 = 0
-	 *  <=> ((x + a) * x + y ) * x + b + y^2 = 0
-	 */
-	if (!BN_GF2m_add(lh, &point->X, &group->a)) goto err;
-	if (!field_mul(group, lh, lh, &point->X, ctx)) goto err;
-	if (!BN_GF2m_add(lh, lh, &point->Y)) goto err;
-	if (!field_mul(group, lh, lh, &point->X, ctx)) goto err;
-	if (!BN_GF2m_add(lh, lh, &group->b)) goto err;
-	if (!field_sqr(group, y2, &point->Y, ctx)) goto err;
-	if (!BN_GF2m_add(lh, lh, y2)) goto err;
-	ret = BN_is_zero(lh);
- err:
-	if (ctx) BN_CTX_end(ctx);
-	if (new_ctx) BN_CTX_free(new_ctx);
-	return ret;
-	}
-
-
-/* Indicates whether two points are equal.
- * Return values:
- *  -1   error
- *   0   equal (in affine coordinates)
- *   1   not equal
- */
-int ec_GF2m_simple_cmp(const EC_GROUP *group, const EC_POINT *a, const EC_POINT *b, BN_CTX *ctx)
-	{
-	BIGNUM *aX, *aY, *bX, *bY;
-	BN_CTX *new_ctx = NULL;
-	int ret = -1;
-
-	if (EC_POINT_is_at_infinity(group, a))
-		{
-		return EC_POINT_is_at_infinity(group, b) ? 0 : 1;
-		}
-	
-	if (a->Z_is_one && b->Z_is_one)
-		{
-		return ((BN_cmp(&a->X, &b->X) == 0) && BN_cmp(&a->Y, &b->Y) == 0) ? 0 : 1;
-		}
-
-	if (ctx == NULL)
-		{
-		ctx = new_ctx = BN_CTX_new();
-		if (ctx == NULL)
-			return -1;
-		}
-
-	BN_CTX_start(ctx);
-	aX = BN_CTX_get(ctx);
-	aY = BN_CTX_get(ctx);
-	bX = BN_CTX_get(ctx);
-	bY = BN_CTX_get(ctx);
-	if (bY == NULL) goto err;
-
-	if (!EC_POINT_get_affine_coordinates_GF2m(group, a, aX, aY, ctx)) goto err;
-	if (!EC_POINT_get_affine_coordinates_GF2m(group, b, bX, bY, ctx)) goto err;
-	ret = ((BN_cmp(aX, bX) == 0) && BN_cmp(aY, bY) == 0) ? 0 : 1;
-
-  err:	
-	if (ctx) BN_CTX_end(ctx);
-	if (new_ctx) BN_CTX_free(new_ctx);
-	return ret;
-	}
-
-
-/* Forces the given EC_POINT to internally use affine coordinates. */
-int ec_GF2m_simple_make_affine(const EC_GROUP *group, EC_POINT *point, BN_CTX *ctx)
-	{
-	BN_CTX *new_ctx = NULL;
-	BIGNUM *x, *y;
-	int ret = 0;
-
-	if (point->Z_is_one || EC_POINT_is_at_infinity(group, point))
-		return 1;
-	
-	if (ctx == NULL)
-		{
-		ctx = new_ctx = BN_CTX_new();
-		if (ctx == NULL)
-			return 0;
-		}
-
-	BN_CTX_start(ctx);
-	x = BN_CTX_get(ctx);
-	y = BN_CTX_get(ctx);
-	if (y == NULL) goto err;
-	
-	if (!EC_POINT_get_affine_coordinates_GF2m(group, point, x, y, ctx)) goto err;
-	if (!BN_copy(&point->X, x)) goto err;
-	if (!BN_copy(&point->Y, y)) goto err;
-	if (!BN_one(&point->Z)) goto err;
-	
-	ret = 1;		
-
-  err:
-	if (ctx) BN_CTX_end(ctx);
-	if (new_ctx) BN_CTX_free(new_ctx);
-	return ret;
-	}
-
-
-/* Forces each of the EC_POINTs in the given array to use affine coordinates. */
-int ec_GF2m_simple_points_make_affine(const EC_GROUP *group, size_t num, EC_POINT *points[], BN_CTX *ctx)
-	{
-	size_t i;
-
-	for (i = 0; i < num; i++)
-		{
-		if (!group->meth->make_affine(group, points[i], ctx)) return 0;
-		}
-
-	return 1;
-	}
-
-
-/* Wrapper to simple binary polynomial field multiplication implementation. */
-int ec_GF2m_simple_field_mul(const EC_GROUP *group, BIGNUM *r, const BIGNUM *a, const BIGNUM *b, BN_CTX *ctx)
-	{
-	return BN_GF2m_mod_mul_arr(r, a, b, group->poly, ctx);
-	}
-
-
-/* Wrapper to simple binary polynomial field squaring implementation. */
-int ec_GF2m_simple_field_sqr(const EC_GROUP *group, BIGNUM *r, const BIGNUM *a, BN_CTX *ctx)
-	{
-	return BN_GF2m_mod_sqr_arr(r, a, group->poly, ctx);
-	}
-
-
-/* Wrapper to simple binary polynomial field division implementation. */
-int ec_GF2m_simple_field_div(const EC_GROUP *group, BIGNUM *r, const BIGNUM *a, const BIGNUM *b, BN_CTX *ctx)
-	{
-	return BN_GF2m_mod_div(r, a, b, &group->field, ctx);
-	}
diff --git a/crypto/openssl/crypto/ec/ec2_smpt.c b/crypto/openssl/crypto/ec/ec2_smpt.c
deleted file mode 100644
index 72a8d570517f..000000000000
--- a/crypto/openssl/crypto/ec/ec2_smpt.c
+++ /dev/null
@@ -1,141 +0,0 @@
-/* crypto/ec/ec2_smpt.c */
-/* This code was originally written by Douglas Stebila 
- * <dstebila@student.math.uwaterloo.ca> for the OpenSSL project.
- */
-/* ====================================================================
- * Copyright (c) 1998-2002 The OpenSSL Project.  All rights reserved.
- *
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions
- * are met:
- *
- * 1. Redistributions of source code must retain the above copyright
- *    notice, this list of conditions and the following disclaimer. 
- *
- * 2. Redistributions in binary form must reproduce the above copyright
- *    notice, this list of conditions and the following disclaimer in
- *    the documentation and/or other materials provided with the
- *    distribution.
- *
- * 3. All advertising materials mentioning features or use of this
- *    software must display the following acknowledgment:
- *    "This product includes software developed by the OpenSSL Project
- *    for use in the OpenSSL Toolkit. (http://www.openssl.org/)"
- *
- * 4. The names "OpenSSL Toolkit" and "OpenSSL Project" must not be used to
- *    endorse or promote products derived from this software without
- *    prior written permission. For written permission, please contact
- *    openssl-core@openssl.org.
- *
- * 5. Products derived from this software may not be called "OpenSSL"
- *    nor may "OpenSSL" appear in their names without prior written
- *    permission of the OpenSSL Project.
- *
- * 6. Redistributions of any form whatsoever must retain the following
- *    acknowledgment:
- *    "This product includes software developed by the OpenSSL Project
- *    for use in the OpenSSL Toolkit (http://www.openssl.org/)"
- *
- * THIS SOFTWARE IS PROVIDED BY THE OpenSSL PROJECT ``AS IS'' AND ANY
- * EXPRESSED OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
- * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR
- * PURPOSE ARE DISCLAIMED.  IN NO EVENT SHALL THE OpenSSL PROJECT OR
- * ITS CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
- * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
- * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
- * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
- * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
- * STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
- * ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED
- * OF THE POSSIBILITY OF SUCH DAMAGE.
- * ====================================================================
- *
- * This product includes cryptographic software written by Eric Young
- * (eay@cryptsoft.com).  This product includes software written by Tim
- * Hudson (tjh@cryptsoft.com).
- *
- */
-
-
-/* Calaculates and sets the affine coordinates of an EC_POINT from the given
- * compressed coordinates.  Uses algorithm 2.3.4 of SEC 1. 
- * Note that the simple implementation only uses affine coordinates.
- *
- * This algorithm is patented by Certicom Corp. under US Patent 6,141,420
- * (for licensing information, contact licensing@certicom.com).
- * This function is disabled by default and can be enabled by defining the 
- * preprocessor macro OPENSSL_EC_BIN_PT_COMP at Configure-time.
- */
-int ec_GF2m_simple_set_compressed_coordinates(const EC_GROUP *group, EC_POINT *point,
-	const BIGNUM *x_, int y_bit, BN_CTX *ctx)
-	{
-#ifndef OPENSSL_EC_BIN_PT_COMP	
-	ECerr(EC_F_EC_GF2M_SIMPLE_SET_COMPRESSED_COORDINATES, ERR_R_DISABLED);
-	return 0;
-#else
-	BN_CTX *new_ctx = NULL;
-	BIGNUM *tmp, *x, *y, *z;
-	int ret = 0, z0;
-
-	/* clear error queue */
-	ERR_clear_error();
-
-	if (ctx == NULL)
-		{
-		ctx = new_ctx = BN_CTX_new();
-		if (ctx == NULL)
-			return 0;
-		}
-
-	y_bit = (y_bit != 0) ? 1 : 0;
-
-	BN_CTX_start(ctx);
-	tmp = BN_CTX_get(ctx);
-	x = BN_CTX_get(ctx);
-	y = BN_CTX_get(ctx);
-	z = BN_CTX_get(ctx);
-	if (z == NULL) goto err;
-
-	if (!BN_GF2m_mod_arr(x, x_, group->poly)) goto err;
-	if (BN_is_zero(x))
-		{
-		if (!BN_GF2m_mod_sqrt_arr(y, &group->b, group->poly, ctx)) goto err;
-		}
-	else
-		{
-		if (!group->meth->field_sqr(group, tmp, x, ctx)) goto err;
-		if (!group->meth->field_div(group, tmp, &group->b, tmp, ctx)) goto err;
-		if (!BN_GF2m_add(tmp, &group->a, tmp)) goto err;
-		if (!BN_GF2m_add(tmp, x, tmp)) goto err;
-		if (!BN_GF2m_mod_solve_quad_arr(z, tmp, group->poly, ctx))
-			{
-			unsigned long err = ERR_peek_last_error();
-			
-			if (ERR_GET_LIB(err) == ERR_LIB_BN && ERR_GET_REASON(err) == BN_R_NO_SOLUTION)
-				{
-				ERR_clear_error();
-				ECerr(EC_F_EC_GF2M_SIMPLE_SET_COMPRESSED_COORDINATES, EC_R_INVALID_COMPRESSED_POINT);
-				}
-			else
-				ECerr(EC_F_EC_GF2M_SIMPLE_SET_COMPRESSED_COORDINATES, ERR_R_BN_LIB);
-			goto err;
-			}
-		z0 = (BN_is_odd(z)) ? 1 : 0;
-		if (!group->meth->field_mul(group, y, x, z, ctx)) goto err;
-		if (z0 != y_bit)
-			{
-			if (!BN_GF2m_add(y, y, x)) goto err;
-			}
-		}
-
-	if (!EC_POINT_set_affine_coordinates_GF2m(group, point, x, y, ctx)) goto err;
-
-	ret = 1;
-
- err:
-	BN_CTX_end(ctx);
-	if (new_ctx != NULL)
-		BN_CTX_free(new_ctx);
-	return ret;
-#endif
-	}
diff --git a/crypto/openssl/crypto/ec/ec_asn1.c b/crypto/openssl/crypto/ec/ec_asn1.c
deleted file mode 100644
index ae555398594b..000000000000
--- a/crypto/openssl/crypto/ec/ec_asn1.c
+++ /dev/null
@@ -1,1429 +0,0 @@
-/* crypto/ec/ec_asn1.c */
-/*
- * Written by Nils Larsch for the OpenSSL project.
- */
-/* ====================================================================
- * Copyright (c) 2000-2003 The OpenSSL Project.  All rights reserved.
- *
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions
- * are met:
- *
- * 1. Redistributions of source code must retain the above copyright
- *    notice, this list of conditions and the following disclaimer. 
- *
- * 2. Redistributions in binary form must reproduce the above copyright
- *    notice, this list of conditions and the following disclaimer in
- *    the documentation and/or other materials provided with the
- *    distribution.
- *
- * 3. All advertising materials mentioning features or use of this
- *    software must display the following acknowledgment:
- *    "This product includes software developed by the OpenSSL Project
- *    for use in the OpenSSL Toolkit. (http://www.OpenSSL.org/)"
- *
- * 4. The names "OpenSSL Toolkit" and "OpenSSL Project" must not be used to
- *    endorse or promote products derived from this software without
- *    prior written permission. For written permission, please contact
- *    licensing@OpenSSL.org.
- *
- * 5. Products derived from this software may not be called "OpenSSL"
- *    nor may "OpenSSL" appear in their names without prior written
- *    permission of the OpenSSL Project.
- *
- * 6. Redistributions of any form whatsoever must retain the following
- *    acknowledgment:
- *    "This product includes software developed by the OpenSSL Project
- *    for use in the OpenSSL Toolkit (http://www.OpenSSL.org/)"
- *
- * THIS SOFTWARE IS PROVIDED BY THE OpenSSL PROJECT ``AS IS'' AND ANY
- * EXPRESSED OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
- * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR
- * PURPOSE ARE DISCLAIMED.  IN NO EVENT SHALL THE OpenSSL PROJECT OR
- * ITS CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
- * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
- * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
- * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
- * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
- * STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
- * ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED
- * OF THE POSSIBILITY OF SUCH DAMAGE.
- * ====================================================================
- *
- * This product includes cryptographic software written by Eric Young
- * (eay@cryptsoft.com).  This product includes software written by Tim
- * Hudson (tjh@cryptsoft.com).
- *
- */
-
-#include <string.h>
-#include "ec_lcl.h"
-#include <openssl/err.h>
-#include <openssl/asn1t.h>
-#include <openssl/objects.h>
-
-
-int EC_GROUP_get_basis_type(const EC_GROUP *group)
-	{
-	int i=0;
-
-	if (EC_METHOD_get_field_type(EC_GROUP_method_of(group)) !=
-		NID_X9_62_characteristic_two_field)
-		/* everything else is currently not supported */
-		return 0;
-
-	while (group->poly[i] != 0)
-		i++;
-
-	if (i == 4)
-		return NID_X9_62_ppBasis;
-	else if (i == 2)
-		return NID_X9_62_tpBasis;
-	else
-		/* everything else is currently not supported */
-		return 0;
-	}
-
-int EC_GROUP_get_trinomial_basis(const EC_GROUP *group, unsigned int *k)
-	{
-	if (group == NULL)
-		return 0;
-
-	if (EC_GROUP_method_of(group)->group_set_curve != ec_GF2m_simple_group_set_curve
-	    || !((group->poly[0] != 0) && (group->poly[1] != 0) && (group->poly[2] == 0)))
-		{
-		ECerr(EC_F_EC_GROUP_GET_TRINOMIAL_BASIS, ERR_R_SHOULD_NOT_HAVE_BEEN_CALLED);
-		return 0;
-		}
-
-	if (k)
-		*k = group->poly[1];
-
-	return 1;
-	}
-
-int EC_GROUP_get_pentanomial_basis(const EC_GROUP *group, unsigned int *k1,
-	unsigned int *k2, unsigned int *k3)
-	{
-	if (group == NULL)
-		return 0;
-
-	if (EC_GROUP_method_of(group)->group_set_curve != ec_GF2m_simple_group_set_curve
-	    || !((group->poly[0] != 0) && (group->poly[1] != 0) && (group->poly[2] != 0) && (group->poly[3] != 0) && (group->poly[4] == 0)))
-		{
-		ECerr(EC_F_EC_GROUP_GET_PENTANOMIAL_BASIS, ERR_R_SHOULD_NOT_HAVE_BEEN_CALLED);
-		return 0;
-		}
-
-	if (k1)
-		*k1 = group->poly[3];
-	if (k2)
-		*k2 = group->poly[2];
-	if (k3)
-		*k3 = group->poly[1];
-
-	return 1;
-	}
-
-
-
-/* some structures needed for the asn1 encoding */
-typedef struct x9_62_pentanomial_st {
-	long k1;
-	long k2;
-	long k3;
-	} X9_62_PENTANOMIAL;
-
-typedef struct x9_62_characteristic_two_st {
-	long m;
-	ASN1_OBJECT  *type;
-	union	{
-		char *ptr;
-		/* NID_X9_62_onBasis */
-		ASN1_NULL    *onBasis;
-		/* NID_X9_62_tpBasis */
-		ASN1_INTEGER *tpBasis;
-		/* NID_X9_62_ppBasis */
-		X9_62_PENTANOMIAL *ppBasis;
-		/* anything else */
-		ASN1_TYPE *other;
-		} p;
-	} X9_62_CHARACTERISTIC_TWO;
-
-typedef struct x9_62_fieldid_st {
-        ASN1_OBJECT *fieldType;
-	union	{
-		char *ptr;
-		/* NID_X9_62_prime_field */
-		ASN1_INTEGER *prime;
-		/* NID_X9_62_characteristic_two_field */
-		X9_62_CHARACTERISTIC_TWO *char_two;
-		/* anything else */
-		ASN1_TYPE *other;
-		} p;
-	} X9_62_FIELDID;
-
-typedef struct x9_62_curve_st {
-        ASN1_OCTET_STRING *a;
-        ASN1_OCTET_STRING *b;
-        ASN1_BIT_STRING   *seed;
-        } X9_62_CURVE;
-
-typedef struct ec_parameters_st {
-        long              version;
-        X9_62_FIELDID     *fieldID;
-        X9_62_CURVE       *curve;
-        ASN1_OCTET_STRING *base;
-        ASN1_INTEGER      *order;
-        ASN1_INTEGER      *cofactor;
-        } ECPARAMETERS;
-
-struct ecpk_parameters_st {
-	int	type;
-	union {
-		ASN1_OBJECT  *named_curve;
-		ECPARAMETERS *parameters;
-		ASN1_NULL    *implicitlyCA;
-	} value;
-	}/* ECPKPARAMETERS */;
-
-/* SEC1 ECPrivateKey */
-typedef struct ec_privatekey_st {
-	long              version;
-	ASN1_OCTET_STRING *privateKey;
-        ECPKPARAMETERS    *parameters;
-	ASN1_BIT_STRING   *publicKey;
-	} EC_PRIVATEKEY;
-
-/* the OpenSSL ASN.1 definitions */
-ASN1_SEQUENCE(X9_62_PENTANOMIAL) = {
-	ASN1_SIMPLE(X9_62_PENTANOMIAL, k1, LONG),
-	ASN1_SIMPLE(X9_62_PENTANOMIAL, k2, LONG),
-	ASN1_SIMPLE(X9_62_PENTANOMIAL, k3, LONG)
-} ASN1_SEQUENCE_END(X9_62_PENTANOMIAL)
-
-DECLARE_ASN1_ALLOC_FUNCTIONS(X9_62_PENTANOMIAL)
-IMPLEMENT_ASN1_ALLOC_FUNCTIONS(X9_62_PENTANOMIAL)
-
-ASN1_ADB_TEMPLATE(char_two_def) = ASN1_SIMPLE(X9_62_CHARACTERISTIC_TWO, p.other, ASN1_ANY);
-
-ASN1_ADB(X9_62_CHARACTERISTIC_TWO) = {
-	ADB_ENTRY(NID_X9_62_onBasis, ASN1_SIMPLE(X9_62_CHARACTERISTIC_TWO, p.onBasis, ASN1_NULL)),
-	ADB_ENTRY(NID_X9_62_tpBasis, ASN1_SIMPLE(X9_62_CHARACTERISTIC_TWO, p.tpBasis, ASN1_INTEGER)),
-	ADB_ENTRY(NID_X9_62_ppBasis, ASN1_SIMPLE(X9_62_CHARACTERISTIC_TWO, p.ppBasis, X9_62_PENTANOMIAL))
-} ASN1_ADB_END(X9_62_CHARACTERISTIC_TWO, 0, type, 0, &char_two_def_tt, NULL);
-
-ASN1_SEQUENCE(X9_62_CHARACTERISTIC_TWO) = {
-	ASN1_SIMPLE(X9_62_CHARACTERISTIC_TWO, m, LONG),
-	ASN1_SIMPLE(X9_62_CHARACTERISTIC_TWO, type, ASN1_OBJECT),
-	ASN1_ADB_OBJECT(X9_62_CHARACTERISTIC_TWO)
-} ASN1_SEQUENCE_END(X9_62_CHARACTERISTIC_TWO)
-
-DECLARE_ASN1_ALLOC_FUNCTIONS(X9_62_CHARACTERISTIC_TWO)
-IMPLEMENT_ASN1_ALLOC_FUNCTIONS(X9_62_CHARACTERISTIC_TWO)
-
-ASN1_ADB_TEMPLATE(fieldID_def) = ASN1_SIMPLE(X9_62_FIELDID, p.other, ASN1_ANY);
-
-ASN1_ADB(X9_62_FIELDID) = {
-	ADB_ENTRY(NID_X9_62_prime_field, ASN1_SIMPLE(X9_62_FIELDID, p.prime, ASN1_INTEGER)),
-	ADB_ENTRY(NID_X9_62_characteristic_two_field, ASN1_SIMPLE(X9_62_FIELDID, p.char_two, X9_62_CHARACTERISTIC_TWO))
-} ASN1_ADB_END(X9_62_FIELDID, 0, fieldType, 0, &fieldID_def_tt, NULL);
-
-ASN1_SEQUENCE(X9_62_FIELDID) = {
-	ASN1_SIMPLE(X9_62_FIELDID, fieldType, ASN1_OBJECT),
-	ASN1_ADB_OBJECT(X9_62_FIELDID)
-} ASN1_SEQUENCE_END(X9_62_FIELDID)
-
-ASN1_SEQUENCE(X9_62_CURVE) = {
-	ASN1_SIMPLE(X9_62_CURVE, a, ASN1_OCTET_STRING),
-	ASN1_SIMPLE(X9_62_CURVE, b, ASN1_OCTET_STRING),
-	ASN1_OPT(X9_62_CURVE, seed, ASN1_BIT_STRING)
-} ASN1_SEQUENCE_END(X9_62_CURVE)
-
-ASN1_SEQUENCE(ECPARAMETERS) = {
-	ASN1_SIMPLE(ECPARAMETERS, version, LONG),
-	ASN1_SIMPLE(ECPARAMETERS, fieldID, X9_62_FIELDID),
-	ASN1_SIMPLE(ECPARAMETERS, curve, X9_62_CURVE),
-	ASN1_SIMPLE(ECPARAMETERS, base, ASN1_OCTET_STRING),
-	ASN1_SIMPLE(ECPARAMETERS, order, ASN1_INTEGER),
-	ASN1_OPT(ECPARAMETERS, cofactor, ASN1_INTEGER)
-} ASN1_SEQUENCE_END(ECPARAMETERS)
-
-DECLARE_ASN1_ALLOC_FUNCTIONS(ECPARAMETERS)
-IMPLEMENT_ASN1_ALLOC_FUNCTIONS(ECPARAMETERS)
-
-ASN1_CHOICE(ECPKPARAMETERS) = {
-	ASN1_SIMPLE(ECPKPARAMETERS, value.named_curve, ASN1_OBJECT),
-	ASN1_SIMPLE(ECPKPARAMETERS, value.parameters, ECPARAMETERS),
-	ASN1_SIMPLE(ECPKPARAMETERS, value.implicitlyCA, ASN1_NULL)
-} ASN1_CHOICE_END(ECPKPARAMETERS)
-
-DECLARE_ASN1_FUNCTIONS_const(ECPKPARAMETERS)
-DECLARE_ASN1_ENCODE_FUNCTIONS_const(ECPKPARAMETERS, ECPKPARAMETERS)
-IMPLEMENT_ASN1_FUNCTIONS_const(ECPKPARAMETERS)
-
-ASN1_SEQUENCE(EC_PRIVATEKEY) = {
-	ASN1_SIMPLE(EC_PRIVATEKEY, version, LONG),
-	ASN1_SIMPLE(EC_PRIVATEKEY, privateKey, ASN1_OCTET_STRING),
-	ASN1_EXP_OPT(EC_PRIVATEKEY, parameters, ECPKPARAMETERS, 0),
-	ASN1_EXP_OPT(EC_PRIVATEKEY, publicKey, ASN1_BIT_STRING, 1)
-} ASN1_SEQUENCE_END(EC_PRIVATEKEY)
-
-DECLARE_ASN1_FUNCTIONS_const(EC_PRIVATEKEY)
-DECLARE_ASN1_ENCODE_FUNCTIONS_const(EC_PRIVATEKEY, EC_PRIVATEKEY)
-IMPLEMENT_ASN1_FUNCTIONS_const(EC_PRIVATEKEY)
-
-/* some declarations of internal function */
-
-/* ec_asn1_group2field() sets the values in a X9_62_FIELDID object */ 
-static int ec_asn1_group2fieldid(const EC_GROUP *, X9_62_FIELDID *);
-/* ec_asn1_group2curve() sets the values in a X9_62_CURVE object */ 
-static int ec_asn1_group2curve(const EC_GROUP *, X9_62_CURVE *);
-/* ec_asn1_parameters2group() creates a EC_GROUP object from a
- * ECPARAMETERS object */
-static EC_GROUP *ec_asn1_parameters2group(const ECPARAMETERS *); 
-/* ec_asn1_group2parameters() creates a ECPARAMETERS object from a 
- * EC_GROUP object */
-static ECPARAMETERS *ec_asn1_group2parameters(const EC_GROUP *,ECPARAMETERS *);
-/* ec_asn1_pkparameters2group() creates a EC_GROUP object from a
- * ECPKPARAMETERS object */
-static EC_GROUP *ec_asn1_pkparameters2group(const ECPKPARAMETERS *); 
-/* ec_asn1_group2pkparameters() creates a ECPKPARAMETERS object from a 
- * EC_GROUP object */
-static ECPKPARAMETERS *ec_asn1_group2pkparameters(const EC_GROUP *, 
-	ECPKPARAMETERS *);
-
-
-/* the function definitions */
-
-static int ec_asn1_group2fieldid(const EC_GROUP *group, X9_62_FIELDID *field)
-	{
-	int			ok=0, nid;
-	BIGNUM			*tmp = NULL;
-	
-	if (group == NULL || field == NULL)
-		return 0;
-
-	/* clear the old values (if necessary) */
-	if (field->fieldType != NULL)
-		ASN1_OBJECT_free(field->fieldType);
-	if (field->p.other != NULL)
-		ASN1_TYPE_free(field->p.other);
-
-	nid = EC_METHOD_get_field_type(EC_GROUP_method_of(group));
-	/* set OID for the field */
-	if ((field->fieldType = OBJ_nid2obj(nid)) == NULL)
-		{
-		ECerr(EC_F_EC_ASN1_GROUP2FIELDID, ERR_R_OBJ_LIB);
-		goto err;
-		}
-
-	if (nid == NID_X9_62_prime_field)
-		{
-		if ((tmp = BN_new()) == NULL) 
-			{
-			ECerr(EC_F_EC_ASN1_GROUP2FIELDID, ERR_R_MALLOC_FAILURE);
-			goto err;
-			}
-		/* the parameters are specified by the prime number p */
-		if (!EC_GROUP_get_curve_GFp(group, tmp, NULL, NULL, NULL))
-			{
-			ECerr(EC_F_EC_ASN1_GROUP2FIELDID, ERR_R_EC_LIB);
-			goto err;
-			}
-		/* set the prime number */
-		field->p.prime = BN_to_ASN1_INTEGER(tmp,NULL);
-		if (field->p.prime == NULL)
-			{
-			ECerr(EC_F_EC_ASN1_GROUP2FIELDID, ERR_R_ASN1_LIB);
-			goto err;
-			}
-		}
-	else	/* nid == NID_X9_62_characteristic_two_field */
-		{
-		int		field_type;
-		X9_62_CHARACTERISTIC_TWO *char_two;
-
-		field->p.char_two = X9_62_CHARACTERISTIC_TWO_new();
-		char_two = field->p.char_two;
-
-		if (char_two == NULL)
-			{
-			ECerr(EC_F_EC_ASN1_GROUP2FIELDID, ERR_R_MALLOC_FAILURE);
-			goto err;
-			}
-	
-		char_two->m = (long)EC_GROUP_get_degree(group);
-
-		field_type = EC_GROUP_get_basis_type(group);
-
-		if (field_type == 0)
-			{
-			ECerr(EC_F_EC_ASN1_GROUP2FIELDID, ERR_R_EC_LIB);
-			goto err;
-			}
-		/* set base type OID */
-		if ((char_two->type = OBJ_nid2obj(field_type)) == NULL)
-			{
-			ECerr(EC_F_EC_ASN1_GROUP2FIELDID, ERR_R_OBJ_LIB);
-			goto err;
-			}
-
-		if (field_type == NID_X9_62_tpBasis)
-			{
-			unsigned int k;
-
-			if (!EC_GROUP_get_trinomial_basis(group, &k))
-				goto err;
-
-			char_two->p.tpBasis = ASN1_INTEGER_new();
-			if (!char_two->p.tpBasis)
-				{
-				ECerr(EC_F_EC_ASN1_GROUP2FIELDID, ERR_R_MALLOC_FAILURE);
-				goto err;
-				}
-			if (!ASN1_INTEGER_set(char_two->p.tpBasis, (long)k))
-				{
-				ECerr(EC_F_EC_ASN1_GROUP2FIELDID,
-					ERR_R_ASN1_LIB);
-				goto err;
-				}
-			}
-		else if (field_type == NID_X9_62_ppBasis)
-			{
-			unsigned int k1, k2, k3;
-
-			if (!EC_GROUP_get_pentanomial_basis(group, &k1, &k2, &k3))
-				goto err;
-
-			char_two->p.ppBasis = X9_62_PENTANOMIAL_new();
-			if (!char_two->p.ppBasis)
-				{
-				ECerr(EC_F_EC_ASN1_GROUP2FIELDID, ERR_R_MALLOC_FAILURE);
-				goto err;
-				}
-
-			/* set k? values */
-			char_two->p.ppBasis->k1 = (long)k1;
-			char_two->p.ppBasis->k2 = (long)k2;
-			char_two->p.ppBasis->k3 = (long)k3;
-			}
-		else /* field_type == NID_X9_62_onBasis */
-			{
-			/* for ONB the parameters are (asn1) NULL */
-			char_two->p.onBasis = ASN1_NULL_new();
-			if (!char_two->p.onBasis)
-				{
-				ECerr(EC_F_EC_ASN1_GROUP2FIELDID, ERR_R_MALLOC_FAILURE);
-				goto err;
-				}
-			}
-		}
-
-	ok = 1;
-
-err :	if (tmp)
-		BN_free(tmp);
-	return(ok);
-}
-
-static int ec_asn1_group2curve(const EC_GROUP *group, X9_62_CURVE *curve)
-	{
-	int           ok=0, nid;
-	BIGNUM        *tmp_1=NULL, *tmp_2=NULL;
-	unsigned char *buffer_1=NULL, *buffer_2=NULL,
-	              *a_buf=NULL, *b_buf=NULL;
-	size_t        len_1, len_2;
-	unsigned char char_zero = 0;
-
-	if (!group || !curve || !curve->a || !curve->b)
-		return 0;
-
-	if ((tmp_1 = BN_new()) == NULL || (tmp_2 = BN_new()) == NULL)
-		{
-		ECerr(EC_F_EC_ASN1_GROUP2CURVE, ERR_R_MALLOC_FAILURE);
-		goto err;
-		}
-
-	nid = EC_METHOD_get_field_type(EC_GROUP_method_of(group));
-
-	/* get a and b */
-	if (nid == NID_X9_62_prime_field)
-		{
-		if (!EC_GROUP_get_curve_GFp(group, NULL, tmp_1, tmp_2, NULL))
-			{
-			ECerr(EC_F_EC_ASN1_GROUP2CURVE, ERR_R_EC_LIB);
-			goto err;
-			}
-		}
-	else	/* nid == NID_X9_62_characteristic_two_field */
-		{
-		if (!EC_GROUP_get_curve_GF2m(group, NULL, tmp_1, tmp_2, NULL))
-			{
-			ECerr(EC_F_EC_ASN1_GROUP2CURVE, ERR_R_EC_LIB);
-			goto err;
-			}
-		}
-
-	len_1 = (size_t)BN_num_bytes(tmp_1);
-	len_2 = (size_t)BN_num_bytes(tmp_2);
-
-	if (len_1 == 0)
-		{
-		/* len_1 == 0 => a == 0 */
-		a_buf = &char_zero;
-		len_1 = 1;
-		}
-	else
-		{
-		if ((buffer_1 = OPENSSL_malloc(len_1)) == NULL)
-			{
-			ECerr(EC_F_EC_ASN1_GROUP2CURVE,
-			      ERR_R_MALLOC_FAILURE);
-			goto err;
-			}
-		if ( (len_1 = BN_bn2bin(tmp_1, buffer_1)) == 0)
-			{
-			ECerr(EC_F_EC_ASN1_GROUP2CURVE, ERR_R_BN_LIB);
-			goto err;
-			}
-		a_buf = buffer_1;
-		}
-
-	if (len_2 == 0)
-		{
-		/* len_2 == 0 => b == 0 */
-		b_buf = &char_zero;
-		len_2 = 1;
-		}
-	else
-		{
-		if ((buffer_2 = OPENSSL_malloc(len_2)) == NULL)
-			{
-			ECerr(EC_F_EC_ASN1_GROUP2CURVE,
-			      ERR_R_MALLOC_FAILURE);
-			goto err;
-			}
-		if ( (len_2 = BN_bn2bin(tmp_2, buffer_2)) == 0)
-			{
-			ECerr(EC_F_EC_ASN1_GROUP2CURVE, ERR_R_BN_LIB);
-			goto err;
-			}
-		b_buf = buffer_2;
-		}
-	
-	/* set a and b */
-	if (!M_ASN1_OCTET_STRING_set(curve->a, a_buf, len_1) ||
-	    !M_ASN1_OCTET_STRING_set(curve->b, b_buf, len_2))
-		{
-		ECerr(EC_F_EC_ASN1_GROUP2CURVE, ERR_R_ASN1_LIB);
-		goto err;
-		}
-	
-	/* set the seed (optional) */
-	if (group->seed)
-		{	
-		if (!curve->seed)
-			if ((curve->seed = ASN1_BIT_STRING_new()) == NULL)
-				{
-				ECerr(EC_F_EC_ASN1_GROUP2CURVE, ERR_R_MALLOC_FAILURE);
-				goto err;
-				}
-		curve->seed->flags &= ~(ASN1_STRING_FLAG_BITS_LEFT|0x07);
-		curve->seed->flags |= ASN1_STRING_FLAG_BITS_LEFT;
-		if (!ASN1_BIT_STRING_set(curve->seed, group->seed, 
-		                         (int)group->seed_len))
-			{
-			ECerr(EC_F_EC_ASN1_GROUP2CURVE, ERR_R_ASN1_LIB);
-			goto err;
-			}
-		}
-	else
-		{
-		if (curve->seed)
-			{
-			ASN1_BIT_STRING_free(curve->seed);
-			curve->seed = NULL;
-			}
-		}
-
-	ok = 1;
-
-err:	if (buffer_1)
-		OPENSSL_free(buffer_1);
-	if (buffer_2)
-		OPENSSL_free(buffer_2);
-	if (tmp_1)
-		BN_free(tmp_1);
-	if (tmp_2)
-		BN_free(tmp_2);
-	return(ok);
-	}
-
-static ECPARAMETERS *ec_asn1_group2parameters(const EC_GROUP *group,
-                                              ECPARAMETERS *param)
-	{
-	int	ok=0;
-	size_t  len=0;
-	ECPARAMETERS   *ret=NULL;
-	BIGNUM	       *tmp=NULL;
-	unsigned char  *buffer=NULL;
-	const EC_POINT *point=NULL;
-	point_conversion_form_t form;
-
-	if ((tmp = BN_new()) == NULL)
-		{
-		ECerr(EC_F_EC_ASN1_GROUP2PARAMETERS, ERR_R_MALLOC_FAILURE);
-		goto err;
-		}
-
-	if (param == NULL)
-	{
-		if ((ret = ECPARAMETERS_new()) == NULL)
-			{
-			ECerr(EC_F_EC_ASN1_GROUP2PARAMETERS, 
-			      ERR_R_MALLOC_FAILURE);
-			goto err;
-			}
-	}
-	else
-		ret = param;
-
-	/* set the version (always one) */
-	ret->version = (long)0x1;
-
-	/* set the fieldID */
-	if (!ec_asn1_group2fieldid(group, ret->fieldID))
-		{
-		ECerr(EC_F_EC_ASN1_GROUP2PARAMETERS, ERR_R_EC_LIB);
-		goto err;
-		}
-
-	/* set the curve */
-	if (!ec_asn1_group2curve(group, ret->curve))
-		{
-		ECerr(EC_F_EC_ASN1_GROUP2PARAMETERS, ERR_R_EC_LIB);
-		goto err;
-		}
-
-	/* set the base point */
-	if ((point = EC_GROUP_get0_generator(group)) == NULL)
-		{
-		ECerr(EC_F_EC_ASN1_GROUP2PARAMETERS, EC_R_UNDEFINED_GENERATOR);
-		goto err;
-		}
-
-	form = EC_GROUP_get_point_conversion_form(group);
-
-	len = EC_POINT_point2oct(group, point, form, NULL, len, NULL);
-	if (len == 0)
-		{
-		ECerr(EC_F_EC_ASN1_GROUP2PARAMETERS, ERR_R_EC_LIB);
-		goto err;
-		}
-	if ((buffer = OPENSSL_malloc(len)) == NULL)
-		{
-		ECerr(EC_F_EC_ASN1_GROUP2PARAMETERS, ERR_R_MALLOC_FAILURE);
-		goto err;
-		}
-	if (!EC_POINT_point2oct(group, point, form, buffer, len, NULL))
-		{
-		ECerr(EC_F_EC_ASN1_GROUP2PARAMETERS, ERR_R_EC_LIB);
-		goto err;
-		}
-	if (ret->base == NULL && (ret->base = ASN1_OCTET_STRING_new()) == NULL)
-		{
-		ECerr(EC_F_EC_ASN1_GROUP2PARAMETERS, ERR_R_MALLOC_FAILURE);
-		goto err;
-		}
-	if (!ASN1_OCTET_STRING_set(ret->base, buffer, len))
-		{
-		ECerr(EC_F_EC_ASN1_GROUP2PARAMETERS, ERR_R_ASN1_LIB);
-		goto err;
-		}
-
-	/* set the order */
-	if (!EC_GROUP_get_order(group, tmp, NULL))
-		{
-		ECerr(EC_F_EC_ASN1_GROUP2PARAMETERS, ERR_R_EC_LIB);
-		goto err;
-		}
-	ret->order = BN_to_ASN1_INTEGER(tmp, ret->order);
-	if (ret->order == NULL)
-		{
-		ECerr(EC_F_EC_ASN1_GROUP2PARAMETERS, ERR_R_ASN1_LIB);
-		goto err;
-		}
-
-	/* set the cofactor (optional) */
-	if (EC_GROUP_get_cofactor(group, tmp, NULL))
-		{
-		ret->cofactor = BN_to_ASN1_INTEGER(tmp, ret->cofactor);
-		if (ret->cofactor == NULL)
-			{
-			ECerr(EC_F_EC_ASN1_GROUP2PARAMETERS, ERR_R_ASN1_LIB);
-			goto err;
-			}
-		}
-
-	ok = 1;
-
-err :	if(!ok)
-		{
-		if (ret && !param)
-			ECPARAMETERS_free(ret);
-		ret = NULL;
-		}
-	if (tmp)
-		BN_free(tmp);
-	if (buffer)
-		OPENSSL_free(buffer);
-	return(ret);
-	}
-
-ECPKPARAMETERS *ec_asn1_group2pkparameters(const EC_GROUP *group, 
-                                           ECPKPARAMETERS *params)
-	{
-	int            ok = 1, tmp;
-	ECPKPARAMETERS *ret = params;
-
-	if (ret == NULL)
-		{
-		if ((ret = ECPKPARAMETERS_new()) == NULL)
-			{
-			ECerr(EC_F_EC_ASN1_GROUP2PKPARAMETERS, 
-			      ERR_R_MALLOC_FAILURE);
-			return NULL;
-			}
-		}
-	else
-		{
-		if (ret->type == 0 && ret->value.named_curve)
-			ASN1_OBJECT_free(ret->value.named_curve);
-		else if (ret->type == 1 && ret->value.parameters)
-			ECPARAMETERS_free(ret->value.parameters);
-		}
-
-	if (EC_GROUP_get_asn1_flag(group))
-		{
-		/* use the asn1 OID to describe the
-		 * the elliptic curve parameters
-		 */
-		tmp = EC_GROUP_get_curve_name(group);
-		if (tmp)
-			{
-			ret->type = 0;
-			if ((ret->value.named_curve = OBJ_nid2obj(tmp)) == NULL)
-				ok = 0;
-			}
-		else
-			/* we don't kmow the nid => ERROR */
-			ok = 0;
-		}
-	else
-		{	
-		/* use the ECPARAMETERS structure */
-		ret->type = 1;
-		if ((ret->value.parameters = ec_asn1_group2parameters(
-		     group, NULL)) == NULL)
-			ok = 0;
-		}
-
-	if (!ok)
-		{
-		ECPKPARAMETERS_free(ret);
-		return NULL;
-		}
-	return ret;
-	}
-
-static EC_GROUP *ec_asn1_parameters2group(const ECPARAMETERS *params)
-	{
-	int			ok = 0, tmp;
-	EC_GROUP		*ret = NULL;
-	BIGNUM			*p = NULL, *a = NULL, *b = NULL;
-	EC_POINT		*point=NULL;
-	long    		field_bits;
-
-	if (!params->fieldID || !params->fieldID->fieldType || 
-	    !params->fieldID->p.ptr)
-		{
-		ECerr(EC_F_EC_ASN1_PARAMETERS2GROUP, EC_R_ASN1_ERROR);
-		goto err;
-		}
-
-	/* now extract the curve parameters a and b */
-	if (!params->curve || !params->curve->a || 
-	    !params->curve->a->data || !params->curve->b ||
-	    !params->curve->b->data)
-		{
-		ECerr(EC_F_EC_ASN1_PARAMETERS2GROUP, EC_R_ASN1_ERROR);
-		goto err;
-		}
-	a = BN_bin2bn(params->curve->a->data, params->curve->a->length, NULL);
-	if (a == NULL)
-		{
-		ECerr(EC_F_EC_ASN1_PARAMETERS2GROUP, ERR_R_BN_LIB);
-		goto err;
-		}
-	b = BN_bin2bn(params->curve->b->data, params->curve->b->length, NULL);
-	if (b == NULL)
-		{
-		ECerr(EC_F_EC_ASN1_PARAMETERS2GROUP, ERR_R_BN_LIB);
-		goto err;
-		}
-
-	/* get the field parameters */
-	tmp = OBJ_obj2nid(params->fieldID->fieldType);
-
-	if (tmp == NID_X9_62_characteristic_two_field)
-		{
-		X9_62_CHARACTERISTIC_TWO *char_two;
-
-		char_two = params->fieldID->p.char_two;
-
-		field_bits = char_two->m;
-		if (field_bits > OPENSSL_ECC_MAX_FIELD_BITS)
-			{
-			ECerr(EC_F_EC_ASN1_PARAMETERS2GROUP, EC_R_FIELD_TOO_LARGE);
-			goto err;
-			}
-
-		if ((p = BN_new()) == NULL)
-			{
-			ECerr(EC_F_EC_ASN1_PARAMETERS2GROUP, ERR_R_MALLOC_FAILURE);
-			goto err;
-			}
-
-		/* get the base type */
-		tmp = OBJ_obj2nid(char_two->type);
-
-		if (tmp ==  NID_X9_62_tpBasis)
-			{
-			long tmp_long;
-
-			if (!char_two->p.tpBasis)
-				{
-				ECerr(EC_F_EC_ASN1_PARAMETERS2GROUP, EC_R_ASN1_ERROR);
-				goto err;
-				}
-
-			tmp_long = ASN1_INTEGER_get(char_two->p.tpBasis);
-
-			if (!(char_two->m > tmp_long && tmp_long > 0))
-				{
-				ECerr(EC_F_EC_ASN1_PARAMETERS2GROUP, EC_R_INVALID_TRINOMIAL_BASIS);
-				goto err;
-				}
-			
-			/* create the polynomial */
-			if (!BN_set_bit(p, (int)char_two->m))
-				goto err;
-			if (!BN_set_bit(p, (int)tmp_long))
-				goto err;
-			if (!BN_set_bit(p, 0))
-				goto err;
-			}
-		else if (tmp == NID_X9_62_ppBasis)
-			{
-			X9_62_PENTANOMIAL *penta;
-
-			penta = char_two->p.ppBasis;
-			if (!penta)
-				{
-				ECerr(EC_F_EC_ASN1_PARAMETERS2GROUP, EC_R_ASN1_ERROR);
-				goto err;
-				}
-
-			if (!(char_two->m > penta->k3 && penta->k3 > penta->k2 && penta->k2 > penta->k1 && penta->k1 > 0))
-				{
-				ECerr(EC_F_EC_ASN1_PARAMETERS2GROUP, EC_R_INVALID_PENTANOMIAL_BASIS);
-				goto err;
-				}
-			
-			/* create the polynomial */
-			if (!BN_set_bit(p, (int)char_two->m)) goto err;
-			if (!BN_set_bit(p, (int)penta->k1)) goto err;
-			if (!BN_set_bit(p, (int)penta->k2)) goto err;
-			if (!BN_set_bit(p, (int)penta->k3)) goto err;
-			if (!BN_set_bit(p, 0)) goto err;
-			}
-		else if (tmp == NID_X9_62_onBasis)
-			{
-			ECerr(EC_F_EC_ASN1_PARAMETERS2GROUP, EC_R_NOT_IMPLEMENTED);
-			goto err;
-			}
-		else /* error */
-			{
-			ECerr(EC_F_EC_ASN1_PARAMETERS2GROUP, EC_R_ASN1_ERROR);
-			goto err;
-			}
-
-		/* create the EC_GROUP structure */
-		ret = EC_GROUP_new_curve_GF2m(p, a, b, NULL);
-		}
-	else if (tmp == NID_X9_62_prime_field)
-		{
-		/* we have a curve over a prime field */
-		/* extract the prime number */
-		if (!params->fieldID->p.prime)
-			{
-			ECerr(EC_F_EC_ASN1_PARAMETERS2GROUP, EC_R_ASN1_ERROR);
-			goto err;
-			}
-		p = ASN1_INTEGER_to_BN(params->fieldID->p.prime, NULL);
-		if (p == NULL)
-			{
-			ECerr(EC_F_EC_ASN1_PARAMETERS2GROUP, ERR_R_ASN1_LIB);
-			goto err;
-			}
-
-		if (BN_is_negative(p) || BN_is_zero(p))
-			{
-			ECerr(EC_F_EC_ASN1_PARAMETERS2GROUP, EC_R_INVALID_FIELD);
-			goto err;
-			}
-
-		field_bits = BN_num_bits(p);
-		if (field_bits > OPENSSL_ECC_MAX_FIELD_BITS)
-			{
-			ECerr(EC_F_EC_ASN1_PARAMETERS2GROUP, EC_R_FIELD_TOO_LARGE);
-			goto err;
-			}
-
-		/* create the EC_GROUP structure */
-		ret = EC_GROUP_new_curve_GFp(p, a, b, NULL);
-		}
-	else
-		{
-		ECerr(EC_F_EC_ASN1_PARAMETERS2GROUP, EC_R_INVALID_FIELD);
-		goto err;
-		}
-
-	if (ret == NULL)
-		{
-		ECerr(EC_F_EC_ASN1_PARAMETERS2GROUP, ERR_R_EC_LIB);
-		goto err;
-		}
-
-	/* extract seed (optional) */
-	if (params->curve->seed != NULL)
-		{
-		if (ret->seed != NULL)
-			OPENSSL_free(ret->seed);
-		if (!(ret->seed = OPENSSL_malloc(params->curve->seed->length)))
-			{
-			ECerr(EC_F_EC_ASN1_PARAMETERS2GROUP, 
-			      ERR_R_MALLOC_FAILURE);
-			goto err;
-			}
-		memcpy(ret->seed, params->curve->seed->data, 
-		       params->curve->seed->length);
-		ret->seed_len = params->curve->seed->length;
-		}
-
-	if (!params->order || !params->base || !params->base->data)
-		{
-		ECerr(EC_F_EC_ASN1_PARAMETERS2GROUP, EC_R_ASN1_ERROR);
-		goto err;
-		}
-
-	if ((point = EC_POINT_new(ret)) == NULL) goto err;
-
-	/* set the point conversion form */
-	EC_GROUP_set_point_conversion_form(ret, (point_conversion_form_t)
-				(params->base->data[0] & ~0x01));
-
-	/* extract the ec point */
-	if (!EC_POINT_oct2point(ret, point, params->base->data, 
-		                params->base->length, NULL))
-		{
-		ECerr(EC_F_EC_ASN1_PARAMETERS2GROUP, ERR_R_EC_LIB);
-		goto err;
-		}
-
-	/* extract the order */
-	if ((a = ASN1_INTEGER_to_BN(params->order, a)) == NULL)
-		{
-		ECerr(EC_F_EC_ASN1_PARAMETERS2GROUP, ERR_R_ASN1_LIB);
-		goto err;
-		}
-	if (BN_is_negative(a) || BN_is_zero(a))
-		{
-		ECerr(EC_F_EC_ASN1_PARAMETERS2GROUP, EC_R_INVALID_GROUP_ORDER);
-		goto err;
-		}
-	if (BN_num_bits(a) > (int)field_bits + 1) /* Hasse bound */
-		{
-		ECerr(EC_F_EC_ASN1_PARAMETERS2GROUP, EC_R_INVALID_GROUP_ORDER);
-		goto err;
-		}
-	
-	/* extract the cofactor (optional) */
-	if (params->cofactor == NULL)
-		{
-		if (b)
-			{
-			BN_free(b);
-			b = NULL;
-			}
-		}
-	else
-		if ((b = ASN1_INTEGER_to_BN(params->cofactor, b)) == NULL)
-			{
-			ECerr(EC_F_EC_ASN1_PARAMETERS2GROUP, ERR_R_ASN1_LIB);
-			goto err;
-			}
-	/* set the generator, order and cofactor (if present) */
-	if (!EC_GROUP_set_generator(ret, point, a, b))
-		{
-		ECerr(EC_F_EC_ASN1_PARAMETERS2GROUP, ERR_R_EC_LIB);
-		goto err;
-		}
-
-	ok = 1;
-
-err:	if (!ok)
-		{
-		if (ret) 
-			EC_GROUP_clear_free(ret);
-		ret = NULL;
-		}
-
-	if (p)	
-		BN_free(p);
-	if (a)	
-		BN_free(a);
-	if (b)	
-		BN_free(b);
-	if (point)	
-		EC_POINT_free(point);
-	return(ret);
-}
-
-EC_GROUP *ec_asn1_pkparameters2group(const ECPKPARAMETERS *params)
-	{
-	EC_GROUP *ret=NULL;
-	int      tmp=0;
-
-	if (params == NULL)
-		{
-		ECerr(EC_F_EC_ASN1_PKPARAMETERS2GROUP, 
-		      EC_R_MISSING_PARAMETERS);
-		return NULL;
-		}
-
-	if (params->type == 0)
-		{ /* the curve is given by an OID */
-		tmp = OBJ_obj2nid(params->value.named_curve);
-		if ((ret = EC_GROUP_new_by_curve_name(tmp)) == NULL)
-			{
-			ECerr(EC_F_EC_ASN1_PKPARAMETERS2GROUP, 
-			      EC_R_EC_GROUP_NEW_BY_NAME_FAILURE);
-			return NULL;
-			}
-		EC_GROUP_set_asn1_flag(ret, OPENSSL_EC_NAMED_CURVE);
-		}
-	else if (params->type == 1)
-		{ /* the parameters are given by a ECPARAMETERS
-		   * structure */
-		ret = ec_asn1_parameters2group(params->value.parameters);
-		if (!ret)
-			{
-			ECerr(EC_F_EC_ASN1_PKPARAMETERS2GROUP, ERR_R_EC_LIB);
-			return NULL;
-			}
-		EC_GROUP_set_asn1_flag(ret, 0x0);
-		}
-	else if (params->type == 2)
-		{ /* implicitlyCA */
-		return NULL;
-		}
-	else
-		{
-		ECerr(EC_F_EC_ASN1_PKPARAMETERS2GROUP, EC_R_ASN1_ERROR);
-		return NULL;
-		}
-
-	return ret;
-	}
-
-/* EC_GROUP <-> DER encoding of ECPKPARAMETERS */
-
-EC_GROUP *d2i_ECPKParameters(EC_GROUP **a, const unsigned char **in, long len)
-	{
-	EC_GROUP	*group  = NULL;
-	ECPKPARAMETERS	*params = NULL;
-
-	if ((params = d2i_ECPKPARAMETERS(NULL, in, len)) == NULL)
-		{
-		ECerr(EC_F_D2I_ECPKPARAMETERS, EC_R_D2I_ECPKPARAMETERS_FAILURE);
-		ECPKPARAMETERS_free(params);
-		return NULL;
-		}
-	
-	if ((group = ec_asn1_pkparameters2group(params)) == NULL)
-		{
-		ECerr(EC_F_D2I_ECPKPARAMETERS, EC_R_PKPARAMETERS2GROUP_FAILURE);
-		return NULL; 
-		}
-
-	
-	if (a && *a)
-		EC_GROUP_clear_free(*a);
-	if (a)
-		*a = group;
-
-	ECPKPARAMETERS_free(params);
-	return(group);
-	}
-
-int i2d_ECPKParameters(const EC_GROUP *a, unsigned char **out)
-	{
-	int		ret=0;
-	ECPKPARAMETERS	*tmp = ec_asn1_group2pkparameters(a, NULL);
-	if (tmp == NULL)
-		{
-		ECerr(EC_F_I2D_ECPKPARAMETERS, EC_R_GROUP2PKPARAMETERS_FAILURE);
-		return 0;
-		}
-	if ((ret = i2d_ECPKPARAMETERS(tmp, out)) == 0)
-		{
-		ECerr(EC_F_I2D_ECPKPARAMETERS, EC_R_I2D_ECPKPARAMETERS_FAILURE);
-		ECPKPARAMETERS_free(tmp);
-		return 0;
-		}	
-	ECPKPARAMETERS_free(tmp);
-	return(ret);
-	}
-
-/* some EC_KEY functions */
-
-EC_KEY *d2i_ECPrivateKey(EC_KEY **a, const unsigned char **in, long len)
-	{
-	int             ok=0;
-	EC_KEY          *ret=NULL;
-	EC_PRIVATEKEY   *priv_key=NULL;
-
-	if ((priv_key = EC_PRIVATEKEY_new()) == NULL)
-		{
-		ECerr(EC_F_D2I_ECPRIVATEKEY, ERR_R_MALLOC_FAILURE);
-		return NULL;
-		}
-
-	if ((priv_key = d2i_EC_PRIVATEKEY(&priv_key, in, len)) == NULL)
-		{
-		ECerr(EC_F_D2I_ECPRIVATEKEY, ERR_R_EC_LIB);
-		EC_PRIVATEKEY_free(priv_key);
-		return NULL;
-		}
-
-	if (a == NULL || *a == NULL)
-		{
-		if ((ret = EC_KEY_new()) == NULL)	
-			{
-			ECerr(EC_F_D2I_ECPRIVATEKEY,
-                                 ERR_R_MALLOC_FAILURE);
-			goto err;
-			}
-		if (a)
-			*a = ret;
-		}
-	else
-		ret = *a;
-
-	if (priv_key->parameters)
-		{
-		if (ret->group)
-			EC_GROUP_clear_free(ret->group);
-		ret->group = ec_asn1_pkparameters2group(priv_key->parameters);
-		}
-
-	if (ret->group == NULL)
-		{
-		ECerr(EC_F_D2I_ECPRIVATEKEY, ERR_R_EC_LIB);
-		goto err;
-		}
-
-	ret->version = priv_key->version;
-
-	if (priv_key->privateKey)
-		{
-		ret->priv_key = BN_bin2bn(
-			M_ASN1_STRING_data(priv_key->privateKey),
-			M_ASN1_STRING_length(priv_key->privateKey),
-			ret->priv_key);
-		if (ret->priv_key == NULL)
-			{
-			ECerr(EC_F_D2I_ECPRIVATEKEY,
-                              ERR_R_BN_LIB);
-			goto err;
-			}
-		}
-	else
-		{
-		ECerr(EC_F_D2I_ECPRIVATEKEY, 
-                      EC_R_MISSING_PRIVATE_KEY);
-		goto err;
-		}
-
-	if (priv_key->publicKey)
-		{
-		const unsigned char *pub_oct;
-		size_t pub_oct_len;
-
-		if (ret->pub_key)
-			EC_POINT_clear_free(ret->pub_key);
-		ret->pub_key = EC_POINT_new(ret->group);
-		if (ret->pub_key == NULL)
-			{
-			ECerr(EC_F_D2I_ECPRIVATEKEY, ERR_R_EC_LIB);
-			goto err;
-			}
-		pub_oct     = M_ASN1_STRING_data(priv_key->publicKey);
-		pub_oct_len = M_ASN1_STRING_length(priv_key->publicKey);
-		/* save the point conversion form */
-		ret->conv_form = (point_conversion_form_t)(pub_oct[0] & ~0x01);
-		if (!EC_POINT_oct2point(ret->group, ret->pub_key,
-			pub_oct, pub_oct_len, NULL))
-			{
-			ECerr(EC_F_D2I_ECPRIVATEKEY, ERR_R_EC_LIB);
-			goto err;
-			}
-		}
-
-	ok = 1;
-err:
-	if (!ok)
-		{
-		if (ret)
-			EC_KEY_free(ret);
-		ret = NULL;
-		}
-
-	if (priv_key)
-		EC_PRIVATEKEY_free(priv_key);
-
-	return(ret);
-	}
-
-int	i2d_ECPrivateKey(EC_KEY *a, unsigned char **out)
-	{
-	int             ret=0, ok=0;
-	unsigned char   *buffer=NULL;
-	size_t          buf_len=0, tmp_len;
-	EC_PRIVATEKEY   *priv_key=NULL;
-
-	if (a == NULL || a->group == NULL || a->priv_key == NULL)
-		{
-		ECerr(EC_F_I2D_ECPRIVATEKEY,
-                      ERR_R_PASSED_NULL_PARAMETER);
-		goto err;
-		}
-
-	if ((priv_key = EC_PRIVATEKEY_new()) == NULL)
-		{
-		ECerr(EC_F_I2D_ECPRIVATEKEY,
-                      ERR_R_MALLOC_FAILURE);
-		goto err;
-		}
-
-	priv_key->version = a->version;
-
-	buf_len = (size_t)BN_num_bytes(a->priv_key);
-	buffer = OPENSSL_malloc(buf_len);
-	if (buffer == NULL)
-		{
-		ECerr(EC_F_I2D_ECPRIVATEKEY,
-                      ERR_R_MALLOC_FAILURE);
-		goto err;
-		}
-	
-	if (!BN_bn2bin(a->priv_key, buffer))
-		{
-		ECerr(EC_F_I2D_ECPRIVATEKEY, ERR_R_BN_LIB);
-		goto err;
-		}
-
-	if (!M_ASN1_OCTET_STRING_set(priv_key->privateKey, buffer, buf_len))
-		{
-		ECerr(EC_F_I2D_ECPRIVATEKEY, ERR_R_ASN1_LIB);
-		goto err;
-		}	
-
-	if (!(a->enc_flag & EC_PKEY_NO_PARAMETERS))
-		{
-		if ((priv_key->parameters = ec_asn1_group2pkparameters(
-			a->group, priv_key->parameters)) == NULL)
-			{
-			ECerr(EC_F_I2D_ECPRIVATEKEY, ERR_R_EC_LIB);
-			goto err;
-			}
-		}
-
-	if (!(a->enc_flag & EC_PKEY_NO_PUBKEY))
-		{
-		priv_key->publicKey = M_ASN1_BIT_STRING_new();
-		if (priv_key->publicKey == NULL)
-			{
-			ECerr(EC_F_I2D_ECPRIVATEKEY,
-				ERR_R_MALLOC_FAILURE);
-			goto err;
-			}
-
-		tmp_len = EC_POINT_point2oct(a->group, a->pub_key, 
-				a->conv_form, NULL, 0, NULL);
-
-		if (tmp_len > buf_len)
-			{
-			unsigned char *tmp_buffer = OPENSSL_realloc(buffer, tmp_len);
-			if (!tmp_buffer)
-				{
-				ECerr(EC_F_I2D_ECPRIVATEKEY, ERR_R_MALLOC_FAILURE);
-				goto err;
-				}
-			buffer = tmp_buffer;
-			buf_len = tmp_len;
-			}
-
-		if (!EC_POINT_point2oct(a->group, a->pub_key, 
-			a->conv_form, buffer, buf_len, NULL))
-			{
-			ECerr(EC_F_I2D_ECPRIVATEKEY, ERR_R_EC_LIB);
-			goto err;
-			}
-
-		priv_key->publicKey->flags &= ~(ASN1_STRING_FLAG_BITS_LEFT|0x07);
-		priv_key->publicKey->flags |= ASN1_STRING_FLAG_BITS_LEFT;
-		if (!M_ASN1_BIT_STRING_set(priv_key->publicKey, buffer, 
-				buf_len))
-			{
-			ECerr(EC_F_I2D_ECPRIVATEKEY, ERR_R_ASN1_LIB);
-			goto err;
-			}
-		}
-
-	if ((ret = i2d_EC_PRIVATEKEY(priv_key, out)) == 0)
-		{
-		ECerr(EC_F_I2D_ECPRIVATEKEY, ERR_R_EC_LIB);
-		goto err;
-		}
-	ok=1;
-err:
-	if (buffer)
-		OPENSSL_free(buffer);
-	if (priv_key)
-		EC_PRIVATEKEY_free(priv_key);
-	return(ok?ret:0);
-	}
-
-int i2d_ECParameters(EC_KEY *a, unsigned char **out)
-	{
-	if (a == NULL)
-		{
-		ECerr(EC_F_I2D_ECPARAMETERS, ERR_R_PASSED_NULL_PARAMETER);
-		return 0;
-		}
-	return i2d_ECPKParameters(a->group, out);
-	}
-
-EC_KEY *d2i_ECParameters(EC_KEY **a, const unsigned char **in, long len)
-	{
-	EC_KEY   *ret;
-
-	if (in == NULL || *in == NULL)
-		{
-		ECerr(EC_F_D2I_ECPARAMETERS, ERR_R_PASSED_NULL_PARAMETER);
-		return NULL;
-		}
-
-	if (a == NULL || *a == NULL)
-		{
-		if ((ret = EC_KEY_new()) == NULL)
-			{
-			ECerr(EC_F_D2I_ECPARAMETERS, ERR_R_MALLOC_FAILURE);
-			return NULL;
-			}
-		if (a)
-			*a = ret;
-		}
-	else
-		ret = *a;
-
-	if (!d2i_ECPKParameters(&ret->group, in, len))
-		{
-		ECerr(EC_F_D2I_ECPARAMETERS, ERR_R_EC_LIB);
-		return NULL;
-		}
-
-	return ret;
-	}
-
-EC_KEY *o2i_ECPublicKey(EC_KEY **a, const unsigned char **in, long len)
-	{
-	EC_KEY *ret=NULL;
-
-	if (a == NULL || (*a) == NULL || (*a)->group == NULL)
-		{
-		/* sorry, but a EC_GROUP-structur is necessary
-                 * to set the public key */
-		ECerr(EC_F_O2I_ECPUBLICKEY, ERR_R_PASSED_NULL_PARAMETER);
-		return 0;
-		}
-	ret = *a;
-	if (ret->pub_key == NULL && 
-		(ret->pub_key = EC_POINT_new(ret->group)) == NULL)
-		{
-		ECerr(EC_F_O2I_ECPUBLICKEY, ERR_R_MALLOC_FAILURE);
-		return 0;
-		}
-	if (!EC_POINT_oct2point(ret->group, ret->pub_key, *in, len, NULL))
-		{
-		ECerr(EC_F_O2I_ECPUBLICKEY, ERR_R_EC_LIB);
-		return 0;
-		}
-	/* save the point conversion form */
-	ret->conv_form = (point_conversion_form_t)(*in[0] & ~0x01);
-	*in += len;
-	return ret;
-	}
-
-int i2o_ECPublicKey(EC_KEY *a, unsigned char **out)
-	{
-        size_t buf_len=0;
-	int new_buffer = 0;
-
-        if (a == NULL) 
-		{
-		ECerr(EC_F_I2O_ECPUBLICKEY, ERR_R_PASSED_NULL_PARAMETER);
-		return 0;
-		}
-
-        buf_len = EC_POINT_point2oct(a->group, a->pub_key, 
-                              a->conv_form, NULL, 0, NULL);
-
-	if (out == NULL || buf_len == 0)
-	/* out == NULL => just return the length of the octet string */
-		return buf_len;
-
-	if (*out == NULL)
-		{
-		if ((*out = OPENSSL_malloc(buf_len)) == NULL)
-			{
-			ECerr(EC_F_I2O_ECPUBLICKEY, ERR_R_MALLOC_FAILURE);
-			return 0;
-			}
-		new_buffer = 1;
-		}
-        if (!EC_POINT_point2oct(a->group, a->pub_key, a->conv_form,
-				*out, buf_len, NULL))
-		{
-		ECerr(EC_F_I2O_ECPUBLICKEY, ERR_R_EC_LIB);
-		OPENSSL_free(*out);
-		*out = NULL;
-		return 0;
-		}
-	if (!new_buffer)
-		*out += buf_len;
-	return buf_len;
-	}
diff --git a/crypto/openssl/crypto/ec/ec_check.c b/crypto/openssl/crypto/ec/ec_check.c
deleted file mode 100644
index 0e316b4b3ff0..000000000000
--- a/crypto/openssl/crypto/ec/ec_check.c
+++ /dev/null
@@ -1,123 +0,0 @@
-/* crypto/ec/ec_check.c */
-/* ====================================================================
- * Copyright (c) 1998-2002 The OpenSSL Project.  All rights reserved.
- *
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions
- * are met:
- *
- * 1. Redistributions of source code must retain the above copyright
- *    notice, this list of conditions and the following disclaimer. 
- *
- * 2. Redistributions in binary form must reproduce the above copyright
- *    notice, this list of conditions and the following disclaimer in
- *    the documentation and/or other materials provided with the
- *    distribution.
- *
- * 3. All advertising materials mentioning features or use of this
- *    software must display the following acknowledgment:
- *    "This product includes software developed by the OpenSSL Project
- *    for use in the OpenSSL Toolkit. (http://www.openssl.org/)"
- *
- * 4. The names "OpenSSL Toolkit" and "OpenSSL Project" must not be used to
- *    endorse or promote products derived from this software without
- *    prior written permission. For written permission, please contact
- *    openssl-core@openssl.org.
- *
- * 5. Products derived from this software may not be called "OpenSSL"
- *    nor may "OpenSSL" appear in their names without prior written
- *    permission of the OpenSSL Project.
- *
- * 6. Redistributions of any form whatsoever must retain the following
- *    acknowledgment:
- *    "This product includes software developed by the OpenSSL Project
- *    for use in the OpenSSL Toolkit (http://www.openssl.org/)"
- *
- * THIS SOFTWARE IS PROVIDED BY THE OpenSSL PROJECT ``AS IS'' AND ANY
- * EXPRESSED OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
- * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR
- * PURPOSE ARE DISCLAIMED.  IN NO EVENT SHALL THE OpenSSL PROJECT OR
- * ITS CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
- * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
- * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
- * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
- * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
- * STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
- * ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED
- * OF THE POSSIBILITY OF SUCH DAMAGE.
- * ====================================================================
- *
- * This product includes cryptographic software written by Eric Young
- * (eay@cryptsoft.com).  This product includes software written by Tim
- * Hudson (tjh@cryptsoft.com).
- *
- */
-
-#include "ec_lcl.h"
-#include <openssl/err.h>
-
-int EC_GROUP_check(const EC_GROUP *group, BN_CTX *ctx)
-	{
-	int ret = 0;
-	BIGNUM *order;
-	BN_CTX *new_ctx = NULL;
-	EC_POINT *point = NULL;
-
-	if (ctx == NULL)
-		{
-		ctx = new_ctx = BN_CTX_new();
-		if (ctx == NULL)
-			{
-			ECerr(EC_F_EC_GROUP_CHECK, ERR_R_MALLOC_FAILURE);
-			goto err;
-			}
-		}
-	BN_CTX_start(ctx);
-	if ((order = BN_CTX_get(ctx)) == NULL) goto err;
-
-	/* check the discriminant */
-	if (!EC_GROUP_check_discriminant(group, ctx))
-		{
-		ECerr(EC_F_EC_GROUP_CHECK, EC_R_DISCRIMINANT_IS_ZERO);
-		goto err;
-		}
-
-	/* check the generator */
-	if (group->generator == NULL)
-		{
-		ECerr(EC_F_EC_GROUP_CHECK, EC_R_UNDEFINED_GENERATOR);
-		goto err;
-		}
-	if (!EC_POINT_is_on_curve(group, group->generator, ctx))
-		{
-		ECerr(EC_F_EC_GROUP_CHECK, EC_R_POINT_IS_NOT_ON_CURVE);
-		goto err;
-		}
-
-	/* check the order of the generator */
-	if ((point = EC_POINT_new(group)) == NULL) goto err;
-	if (!EC_GROUP_get_order(group, order, ctx)) goto err; 
-	if (BN_is_zero(order))
-		{
-		ECerr(EC_F_EC_GROUP_CHECK, EC_R_UNDEFINED_ORDER);
-		goto err;
-		}
-	
-	if (!EC_POINT_mul(group, point, order, NULL, NULL, ctx)) goto err;
-	if (!EC_POINT_is_at_infinity(group, point))
-		{
-		ECerr(EC_F_EC_GROUP_CHECK, EC_R_INVALID_GROUP_ORDER);
-		goto err;
-		}
-
-	ret = 1;
-
-err:
-	if (ctx != NULL)
-		BN_CTX_end(ctx);
-	if (new_ctx != NULL)
-		BN_CTX_free(new_ctx);
-	if (point)
-		EC_POINT_free(point);
-	return ret;
-	}
diff --git a/crypto/openssl/crypto/ec/ec_curve.c b/crypto/openssl/crypto/ec/ec_curve.c
deleted file mode 100644
index beac20969b75..000000000000
--- a/crypto/openssl/crypto/ec/ec_curve.c
+++ /dev/null
@@ -1,1270 +0,0 @@
-/* crypto/ec/ec_curve.c */
-/*
- * Written by Nils Larsch for the OpenSSL project.
- */
-/* ====================================================================
- * Copyright (c) 1998-2004 The OpenSSL Project.  All rights reserved.
- *
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions
- * are met:
- *
- * 1. Redistributions of source code must retain the above copyright
- *    notice, this list of conditions and the following disclaimer. 
- *
- * 2. Redistributions in binary form must reproduce the above copyright
- *    notice, this list of conditions and the following disclaimer in
- *    the documentation and/or other materials provided with the
- *    distribution.
- *
- * 3. All advertising materials mentioning features or use of this
- *    software must display the following acknowledgment:
- *    "This product includes software developed by the OpenSSL Project
- *    for use in the OpenSSL Toolkit. (http://www.openssl.org/)"
- *
- * 4. The names "OpenSSL Toolkit" and "OpenSSL Project" must not be used to
- *    endorse or promote products derived from this software without
- *    prior written permission. For written permission, please contact
- *    openssl-core@openssl.org.
- *
- * 5. Products derived from this software may not be called "OpenSSL"
- *    nor may "OpenSSL" appear in their names without prior written
- *    permission of the OpenSSL Project.
- *
- * 6. Redistributions of any form whatsoever must retain the following
- *    acknowledgment:
- *    "This product includes software developed by the OpenSSL Project
- *    for use in the OpenSSL Toolkit (http://www.openssl.org/)"
- *
- * THIS SOFTWARE IS PROVIDED BY THE OpenSSL PROJECT ``AS IS'' AND ANY
- * EXPRESSED OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
- * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR
- * PURPOSE ARE DISCLAIMED.  IN NO EVENT SHALL THE OpenSSL PROJECT OR
- * ITS CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
- * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
- * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
- * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
- * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
- * STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
- * ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED
- * OF THE POSSIBILITY OF SUCH DAMAGE.
- * ====================================================================
- *
- * This product includes cryptographic software written by Eric Young
- * (eay@cryptsoft.com).  This product includes software written by Tim
- * Hudson (tjh@cryptsoft.com).
- *
- */
-/* ====================================================================
- * Copyright 2002 Sun Microsystems, Inc. ALL RIGHTS RESERVED.
- *
- * Portions of the attached software ("Contribution") are developed by 
- * SUN MICROSYSTEMS, INC., and are contributed to the OpenSSL project.
- *
- * The Contribution is licensed pursuant to the OpenSSL open source
- * license provided above.
- *
- * The elliptic curve binary polynomial software is originally written by 
- * Sheueling Chang Shantz and Douglas Stebila of Sun Microsystems Laboratories.
- *
- */
-
-#include "ec_lcl.h"
-#include <openssl/err.h>
-#include <openssl/obj_mac.h>
-
-typedef struct ec_curve_data_st {
-	int	field_type;	/* either NID_X9_62_prime_field or
-				 * NID_X9_62_characteristic_two_field */
-	const char *p;		/* either a prime number or a polynomial */
-	const char *a;
-	const char *b;
-	const char *x;		/* the x coordinate of the generator */
-	const char *y;		/* the y coordinate of the generator */
-	const char *order;	/* the order of the group generated by the
-				 * generator */
-	const BN_ULONG cofactor;/* the cofactor */
-	const unsigned char *seed;/* the seed (optional) */
-	size_t	seed_len;
-	const char *comment;	/* a short description of the curve */
-} EC_CURVE_DATA;
-
-/* the nist prime curves */
-static const unsigned char _EC_NIST_PRIME_192_SEED[] = {
-	0x30,0x45,0xAE,0x6F,0xC8,0x42,0x2F,0x64,0xED,0x57,
-	0x95,0x28,0xD3,0x81,0x20,0xEA,0xE1,0x21,0x96,0xD5};
-static const EC_CURVE_DATA _EC_NIST_PRIME_192 = {
-	NID_X9_62_prime_field,
-	"FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFEFFFFFFFFFFFFFFFF",
-	"FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFEFFFFFFFFFFFFFFFC",
-	"64210519E59C80E70FA7E9AB72243049FEB8DEECC146B9B1",
-	"188DA80EB03090F67CBF20EB43A18800F4FF0AFD82FF1012",
-	"07192b95ffc8da78631011ed6b24cdd573f977a11e794811",
-	"FFFFFFFFFFFFFFFFFFFFFFFF99DEF836146BC9B1B4D22831",1,
-	_EC_NIST_PRIME_192_SEED, 20,
-	"NIST/X9.62/SECG curve over a 192 bit prime field"
-	};
-
-static const unsigned char _EC_NIST_PRIME_224_SEED[] = {
-	0xBD,0x71,0x34,0x47,0x99,0xD5,0xC7,0xFC,0xDC,0x45,
-	0xB5,0x9F,0xA3,0xB9,0xAB,0x8F,0x6A,0x94,0x8B,0xC5};
-static const EC_CURVE_DATA _EC_NIST_PRIME_224 = {
-	NID_X9_62_prime_field,
-	"FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF000000000000000000000001",
-	"FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFEFFFFFFFFFFFFFFFFFFFFFFFE",
-	"B4050A850C04B3ABF54132565044B0B7D7BFD8BA270B39432355FFB4",
-	"B70E0CBD6BB4BF7F321390B94A03C1D356C21122343280D6115C1D21",
-	"bd376388b5f723fb4c22dfe6cd4375a05a07476444d5819985007e34",
-	"FFFFFFFFFFFFFFFFFFFFFFFFFFFF16A2E0B8F03E13DD29455C5C2A3D",1,
-	_EC_NIST_PRIME_224_SEED, 20,
-	"NIST/SECG curve over a 224 bit prime field"
-	};
-
-static const unsigned char _EC_NIST_PRIME_384_SEED[] = {
-	0xA3,0x35,0x92,0x6A,0xA3,0x19,0xA2,0x7A,0x1D,0x00,
-	0x89,0x6A,0x67,0x73,0xA4,0x82,0x7A,0xCD,0xAC,0x73};
-static const EC_CURVE_DATA _EC_NIST_PRIME_384 = {
-	NID_X9_62_prime_field,
-	"FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFEFFFFF"
-	"FFF0000000000000000FFFFFFFF",
-	"FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFEFFFFF"
-	"FFF0000000000000000FFFFFFFC",
-	"B3312FA7E23EE7E4988E056BE3F82D19181D9C6EFE8141120314088F5013875AC6563"
-	"98D8A2ED19D2A85C8EDD3EC2AEF",
-	"AA87CA22BE8B05378EB1C71EF320AD746E1D3B628BA79B9859F741E082542A385502F"
-	"25DBF55296C3A545E3872760AB7",
-	"3617de4a96262c6f5d9e98bf9292dc29f8f41dbd289a147ce9da3113b5f0b8c00a60b"
-	"1ce1d7e819d7a431d7c90ea0e5f",
-	"FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFC7634D81F4372DDF581A0"
-	"DB248B0A77AECEC196ACCC52973",1,
-	_EC_NIST_PRIME_384_SEED, 20,
-	"NIST/SECG curve over a 384 bit prime field"
-	};
-
-static const unsigned char _EC_NIST_PRIME_521_SEED[] = {
-	0xD0,0x9E,0x88,0x00,0x29,0x1C,0xB8,0x53,0x96,0xCC,
-	0x67,0x17,0x39,0x32,0x84,0xAA,0xA0,0xDA,0x64,0xBA};
-static const EC_CURVE_DATA _EC_NIST_PRIME_521 = {
-	NID_X9_62_prime_field,
-	"1FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF"
-	"FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF",
-	"1FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF"
-	"FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFC",
-	"051953EB9618E1C9A1F929A21A0B68540EEA2DA725B99B315F3B8B489918EF109E156"
-	"193951EC7E937B1652C0BD3BB1BF073573DF883D2C34F1EF451FD46B503F00",
-	"C6858E06B70404E9CD9E3ECB662395B4429C648139053FB521F828AF606B4D3DBAA14"
-	"B5E77EFE75928FE1DC127A2FFA8DE3348B3C1856A429BF97E7E31C2E5BD66",
-	"011839296a789a3bc0045c8a5fb42c7d1bd998f54449579b446817afbd17273e662c9"
-	"7ee72995ef42640c550b9013fad0761353c7086a272c24088be94769fd16650",
-	"1FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFA51"
-	"868783BF2F966B7FCC0148F709A5D03BB5C9B8899C47AEBB6FB71E91386409",1,
-	_EC_NIST_PRIME_521_SEED, 20,
-	"NIST/SECG curve over a 521 bit prime field"
-	};
-/* the x9.62 prime curves (minus the nist prime curves) */
-static const unsigned char _EC_X9_62_PRIME_192V2_SEED[] = {
-	0x31,0xA9,0x2E,0xE2,0x02,0x9F,0xD1,0x0D,0x90,0x1B,
-	0x11,0x3E,0x99,0x07,0x10,0xF0,0xD2,0x1A,0xC6,0xB6};
-static const EC_CURVE_DATA _EC_X9_62_PRIME_192V2 = {
-	NID_X9_62_prime_field,
-	"FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFEFFFFFFFFFFFFFFFF",
-	"FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFEFFFFFFFFFFFFFFFC",
-	"CC22D6DFB95C6B25E49C0D6364A4E5980C393AA21668D953",
-	"EEA2BAE7E1497842F2DE7769CFE9C989C072AD696F48034A",
-	"6574d11d69b6ec7a672bb82a083df2f2b0847de970b2de15",
-	"FFFFFFFFFFFFFFFFFFFFFFFE5FB1A724DC80418648D8DD31",1,
-	_EC_X9_62_PRIME_192V2_SEED, 20,
-	"X9.62 curve over a 192 bit prime field"
-	};
-
-static const unsigned char _EC_X9_62_PRIME_192V3_SEED[] = {
-	0xC4,0x69,0x68,0x44,0x35,0xDE,0xB3,0x78,0xC4,0xB6,
-	0x5C,0xA9,0x59,0x1E,0x2A,0x57,0x63,0x05,0x9A,0x2E};
-static const EC_CURVE_DATA _EC_X9_62_PRIME_192V3 = {
-	NID_X9_62_prime_field,
-	"FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFEFFFFFFFFFFFFFFFF",
-	"FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFEFFFFFFFFFFFFFFFC",
-	"22123DC2395A05CAA7423DAECCC94760A7D462256BD56916",
-	"7D29778100C65A1DA1783716588DCE2B8B4AEE8E228F1896",
-	"38a90f22637337334b49dcb66a6dc8f9978aca7648a943b0",
-	"FFFFFFFFFFFFFFFFFFFFFFFF7A62D031C83F4294F640EC13",1,
-	_EC_X9_62_PRIME_192V3_SEED, 20,
-	"X9.62 curve over a 192 bit prime field"
-	};
-
-static const unsigned char _EC_X9_62_PRIME_239V1_SEED[] = {
-	0xE4,0x3B,0xB4,0x60,0xF0,0xB8,0x0C,0xC0,0xC0,0xB0,
-	0x75,0x79,0x8E,0x94,0x80,0x60,0xF8,0x32,0x1B,0x7D};
-static const EC_CURVE_DATA _EC_X9_62_PRIME_239V1 = {
-	NID_X9_62_prime_field,
-	"7FFFFFFFFFFFFFFFFFFFFFFF7FFFFFFFFFFF8000000000007FFFFFFFFFFF",
-	"7FFFFFFFFFFFFFFFFFFFFFFF7FFFFFFFFFFF8000000000007FFFFFFFFFFC",
-	"6B016C3BDCF18941D0D654921475CA71A9DB2FB27D1D37796185C2942C0A",
-	"0FFA963CDCA8816CCC33B8642BEDF905C3D358573D3F27FBBD3B3CB9AAAF",
-	"7debe8e4e90a5dae6e4054ca530ba04654b36818ce226b39fccb7b02f1ae",
-	"7FFFFFFFFFFFFFFFFFFFFFFF7FFFFF9E5E9A9F5D9071FBD1522688909D0B",1,
-	_EC_X9_62_PRIME_239V1_SEED, 20,
-	"X9.62 curve over a 239 bit prime field"
-	};
-
-static const unsigned char _EC_X9_62_PRIME_239V2_SEED[] = {
-	0xE8,0xB4,0x01,0x16,0x04,0x09,0x53,0x03,0xCA,0x3B,
-	0x80,0x99,0x98,0x2B,0xE0,0x9F,0xCB,0x9A,0xE6,0x16};
-static const EC_CURVE_DATA _EC_X9_62_PRIME_239V2 = {
-	NID_X9_62_prime_field,
-	"7FFFFFFFFFFFFFFFFFFFFFFF7FFFFFFFFFFF8000000000007FFFFFFFFFFF",
-	"7FFFFFFFFFFFFFFFFFFFFFFF7FFFFFFFFFFF8000000000007FFFFFFFFFFC",
-	"617FAB6832576CBBFED50D99F0249C3FEE58B94BA0038C7AE84C8C832F2C",
-	"38AF09D98727705120C921BB5E9E26296A3CDCF2F35757A0EAFD87B830E7",
-	"5b0125e4dbea0ec7206da0fc01d9b081329fb555de6ef460237dff8be4ba",
-	"7FFFFFFFFFFFFFFFFFFFFFFF800000CFA7E8594377D414C03821BC582063",1,
-	_EC_X9_62_PRIME_239V2_SEED, 20,
-	"X9.62 curve over a 239 bit prime field"
-	};
-
-static const unsigned char _EC_X9_62_PRIME_239V3_SEED[] = {
-	0x7D,0x73,0x74,0x16,0x8F,0xFE,0x34,0x71,0xB6,0x0A,
-	0x85,0x76,0x86,0xA1,0x94,0x75,0xD3,0xBF,0xA2,0xFF};
-static const EC_CURVE_DATA _EC_X9_62_PRIME_239V3 = {
-	NID_X9_62_prime_field,
-	"7FFFFFFFFFFFFFFFFFFFFFFF7FFFFFFFFFFF8000000000007FFFFFFFFFFF",
-	"7FFFFFFFFFFFFFFFFFFFFFFF7FFFFFFFFFFF8000000000007FFFFFFFFFFC",
-	"255705FA2A306654B1F4CB03D6A750A30C250102D4988717D9BA15AB6D3E",
-	"6768AE8E18BB92CFCF005C949AA2C6D94853D0E660BBF854B1C9505FE95A",
-	"1607e6898f390c06bc1d552bad226f3b6fcfe48b6e818499af18e3ed6cf3",
-	"7FFFFFFFFFFFFFFFFFFFFFFF7FFFFF975DEB41B3A6057C3C432146526551",1,
-	_EC_X9_62_PRIME_239V3_SEED, 20,
-	"X9.62 curve over a 239 bit prime field"
-	};
-
-static const unsigned char _EC_X9_62_PRIME_256V1_SEED[] = {
-	0xC4,0x9D,0x36,0x08,0x86,0xE7,0x04,0x93,0x6A,0x66,
-	0x78,0xE1,0x13,0x9D,0x26,0xB7,0x81,0x9F,0x7E,0x90};
-static const EC_CURVE_DATA _EC_X9_62_PRIME_256V1 = {
-	NID_X9_62_prime_field,
-	"FFFFFFFF00000001000000000000000000000000FFFFFFFFFFFFFFFFFFFFFFFF",
-	"FFFFFFFF00000001000000000000000000000000FFFFFFFFFFFFFFFFFFFFFFFC",
-	"5AC635D8AA3A93E7B3EBBD55769886BC651D06B0CC53B0F63BCE3C3E27D2604B",
-	"6B17D1F2E12C4247F8BCE6E563A440F277037D812DEB33A0F4A13945D898C296",
-	"4fe342e2fe1a7f9b8ee7eb4a7c0f9e162bce33576b315ececbb6406837bf51f5",
-	"FFFFFFFF00000000FFFFFFFFFFFFFFFFBCE6FAADA7179E84F3B9CAC2FC632551",1,
-	_EC_X9_62_PRIME_256V1_SEED, 20,
-	"X9.62/SECG curve over a 256 bit prime field"
-	};
-/* the secg prime curves (minus the nist and x9.62 prime curves) */
-static const unsigned char _EC_SECG_PRIME_112R1_SEED[] = {
-	0x00,0xF5,0x0B,0x02,0x8E,0x4D,0x69,0x6E,0x67,0x68,
-	0x75,0x61,0x51,0x75,0x29,0x04,0x72,0x78,0x3F,0xB1};
-static const EC_CURVE_DATA _EC_SECG_PRIME_112R1 = {
-	NID_X9_62_prime_field,
-	"DB7C2ABF62E35E668076BEAD208B",
-	"DB7C2ABF62E35E668076BEAD2088",
-	"659EF8BA043916EEDE8911702B22",
-	"09487239995A5EE76B55F9C2F098",
-	"a89ce5af8724c0a23e0e0ff77500",
-	"DB7C2ABF62E35E7628DFAC6561C5",1,
-	_EC_SECG_PRIME_112R1_SEED, 20,
-	"SECG/WTLS curve over a 112 bit prime field"
-	};
-
-static const unsigned char _EC_SECG_PRIME_112R2_SEED[] = {
-	0x00,0x27,0x57,0xA1,0x11,0x4D,0x69,0x6E,0x67,0x68,
-	0x75,0x61,0x51,0x75,0x53,0x16,0xC0,0x5E,0x0B,0xD4};
-static const EC_CURVE_DATA _EC_SECG_PRIME_112R2 = {
-	NID_X9_62_prime_field,
-	"DB7C2ABF62E35E668076BEAD208B",
-	"6127C24C05F38A0AAAF65C0EF02C",
-	"51DEF1815DB5ED74FCC34C85D709",
-	"4BA30AB5E892B4E1649DD0928643",
-	"adcd46f5882e3747def36e956e97",
-	"36DF0AAFD8B8D7597CA10520D04B",4, 
-	_EC_SECG_PRIME_112R2_SEED, 20,
-	"SECG curve over a 112 bit prime field"
-	};
-
-static const unsigned char _EC_SECG_PRIME_128R1_SEED[] = {
-	0x00,0x0E,0x0D,0x4D,0x69,0x6E,0x67,0x68,0x75,0x61,
-	0x51,0x75,0x0C,0xC0,0x3A,0x44,0x73,0xD0,0x36,0x79};
-static const EC_CURVE_DATA _EC_SECG_PRIME_128R1 = {
-	NID_X9_62_prime_field,
-	"FFFFFFFDFFFFFFFFFFFFFFFFFFFFFFFF",
-	"FFFFFFFDFFFFFFFFFFFFFFFFFFFFFFFC",
-	"E87579C11079F43DD824993C2CEE5ED3",
-	"161FF7528B899B2D0C28607CA52C5B86",
-	"cf5ac8395bafeb13c02da292dded7a83",
-	"FFFFFFFE0000000075A30D1B9038A115",1,
-	_EC_SECG_PRIME_128R1_SEED, 20,
-	"SECG curve over a 128 bit prime field"
-	};
-
-static const unsigned char _EC_SECG_PRIME_128R2_SEED[] = {
-	0x00,0x4D,0x69,0x6E,0x67,0x68,0x75,0x61,0x51,0x75,
-	0x12,0xD8,0xF0,0x34,0x31,0xFC,0xE6,0x3B,0x88,0xF4};
-static const EC_CURVE_DATA _EC_SECG_PRIME_128R2 = {
-	NID_X9_62_prime_field,
-	"FFFFFFFDFFFFFFFFFFFFFFFFFFFFFFFF",
-	"D6031998D1B3BBFEBF59CC9BBFF9AEE1",
-	"5EEEFCA380D02919DC2C6558BB6D8A5D",
-	"7B6AA5D85E572983E6FB32A7CDEBC140",
-	"27b6916a894d3aee7106fe805fc34b44",
-	"3FFFFFFF7FFFFFFFBE0024720613B5A3",4,
-	_EC_SECG_PRIME_128R2_SEED, 20,
-	"SECG curve over a 128 bit prime field"
-	};
-
-static const EC_CURVE_DATA _EC_SECG_PRIME_160K1 = {
-	NID_X9_62_prime_field,
-	"FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFEFFFFAC73",
-	"0",
-	"7",
-	"3B4C382CE37AA192A4019E763036F4F5DD4D7EBB",
-	"938cf935318fdced6bc28286531733c3f03c4fee",
-	"0100000000000000000001B8FA16DFAB9ACA16B6B3",1,
-	NULL, 0,
-	"SECG curve over a 160 bit prime field"
-	};
-
-static const unsigned char _EC_SECG_PRIME_160R1_SEED[] = {
-	0x10,0x53,0xCD,0xE4,0x2C,0x14,0xD6,0x96,0xE6,0x76,
-	0x87,0x56,0x15,0x17,0x53,0x3B,0xF3,0xF8,0x33,0x45};
-static const EC_CURVE_DATA _EC_SECG_PRIME_160R1 = {
-	NID_X9_62_prime_field,
-	"FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF7FFFFFFF",
-	"FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF7FFFFFFC",
-	"1C97BEFC54BD7A8B65ACF89F81D4D4ADC565FA45",
-	"4A96B5688EF573284664698968C38BB913CBFC82",
-	"23a628553168947d59dcc912042351377ac5fb32",
-	"0100000000000000000001F4C8F927AED3CA752257",1,
-	_EC_SECG_PRIME_160R1_SEED, 20,
-	"SECG curve over a 160 bit prime field"
-	};
-
-static const unsigned char _EC_SECG_PRIME_160R2_SEED[] = {
-	0xB9,0x9B,0x99,0xB0,0x99,0xB3,0x23,0xE0,0x27,0x09,
-	0xA4,0xD6,0x96,0xE6,0x76,0x87,0x56,0x15,0x17,0x51};
-static const EC_CURVE_DATA _EC_SECG_PRIME_160R2 = {
-	NID_X9_62_prime_field,
-	"FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFEFFFFAC73",
-	"FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFEFFFFAC70",
-	"B4E134D3FB59EB8BAB57274904664D5AF50388BA",
-	"52DCB034293A117E1F4FF11B30F7199D3144CE6D",
-	"feaffef2e331f296e071fa0df9982cfea7d43f2e",
-	"0100000000000000000000351EE786A818F3A1A16B",1,
-	_EC_SECG_PRIME_160R2_SEED, 20,
-	"SECG/WTLS curve over a 160 bit prime field"
-	};
-
-static const EC_CURVE_DATA _EC_SECG_PRIME_192K1 = {
-	NID_X9_62_prime_field,
-	"FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFEFFFFEE37",
-	"0",
-	"3",
-	"DB4FF10EC057E9AE26B07D0280B7F4341DA5D1B1EAE06C7D",
-	"9b2f2f6d9c5628a7844163d015be86344082aa88d95e2f9d",
-	"FFFFFFFFFFFFFFFFFFFFFFFE26F2FC170F69466A74DEFD8D",1,
-	NULL, 20,
-	"SECG curve over a 192 bit prime field"
-	};
-
-static const EC_CURVE_DATA _EC_SECG_PRIME_224K1 = {
-	NID_X9_62_prime_field,
-	"FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFEFFFFE56D",
-	"0",
-	"5",
-	"A1455B334DF099DF30FC28A169A467E9E47075A90F7E650EB6B7A45C",
-	"7e089fed7fba344282cafbd6f7e319f7c0b0bd59e2ca4bdb556d61a5",
-	"010000000000000000000000000001DCE8D2EC6184CAF0A971769FB1F7",1,
-	NULL, 20,
-	"SECG curve over a 224 bit prime field"
-	};
-
-static const EC_CURVE_DATA _EC_SECG_PRIME_256K1 = {
-	NID_X9_62_prime_field,
-	"FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFEFFFFFC2F",
-	"0",
-	"7",
-	"79BE667EF9DCBBAC55A06295CE870B07029BFCDB2DCE28D959F2815B16F81798",
-	"483ada7726a3c4655da4fbfc0e1108a8fd17b448a68554199c47d08ffb10d4b8",
-	"FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFEBAAEDCE6AF48A03BBFD25E8CD0364141",1,
-	NULL, 20,
-	"SECG curve over a 256 bit prime field"
-	};
-
-/* some wap/wtls curves */
-static const EC_CURVE_DATA _EC_WTLS_8 = {
-	NID_X9_62_prime_field,
-	"FFFFFFFFFFFFFFFFFFFFFFFFFDE7",
-	"0",
-	"3",
-	"1",
-	"2",
-	"0100000000000001ECEA551AD837E9",1,
-	NULL, 20,
-	"WTLS curve over a 112 bit prime field"
-	};
-
-static const EC_CURVE_DATA _EC_WTLS_9 = {
-	NID_X9_62_prime_field,
-	"FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFC808F",
-	"0",
-	"3",
-	"1",
-	"2",
-	"0100000000000000000001CDC98AE0E2DE574ABF33",1,
-	NULL, 20,
-	"WTLS curve over a 160 bit prime field"
-	};
-
-static const EC_CURVE_DATA _EC_WTLS_12 = {
-	NID_X9_62_prime_field,
-	"FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF000000000000000000000001",
-	"FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFEFFFFFFFFFFFFFFFFFFFFFFFE",
-	"B4050A850C04B3ABF54132565044B0B7D7BFD8BA270B39432355FFB4",
-	"B70E0CBD6BB4BF7F321390B94A03C1D356C21122343280D6115C1D21",
-	"bd376388b5f723fb4c22dfe6cd4375a05a07476444d5819985007e34",
-	"FFFFFFFFFFFFFFFFFFFFFFFFFFFF16A2E0B8F03E13DD29455C5C2A3D", 1,
-	NULL, 0,
-	"WTLS curvs over a 224 bit prime field"
-	};
-
-/* characteristic two curves */
-static const unsigned char _EC_SECG_CHAR2_113R1_SEED[] = {
-	0x10,0xE7,0x23,0xAB,0x14,0xD6,0x96,0xE6,0x76,0x87,
-	0x56,0x15,0x17,0x56,0xFE,0xBF,0x8F,0xCB,0x49,0xA9};
-static const EC_CURVE_DATA _EC_SECG_CHAR2_113R1 = {
-	NID_X9_62_characteristic_two_field,
-	"020000000000000000000000000201",
-	"003088250CA6E7C7FE649CE85820F7",
-	"00E8BEE4D3E2260744188BE0E9C723",
-	"009D73616F35F4AB1407D73562C10F",
-	"00A52830277958EE84D1315ED31886",
-	"0100000000000000D9CCEC8A39E56F", 2,
-	_EC_SECG_CHAR2_113R1_SEED, 20,
-	"SECG curve over a 113 bit binary field"
-	};
-
-static const unsigned char _EC_SECG_CHAR2_113R2_SEED[] = {
-	0x10,0xC0,0xFB,0x15,0x76,0x08,0x60,0xDE,0xF1,0xEE,
-	0xF4,0xD6,0x96,0xE6,0x76,0x87,0x56,0x15,0x17,0x5D};
-static const EC_CURVE_DATA _EC_SECG_CHAR2_113R2 = {
-	NID_X9_62_characteristic_two_field,
-	"020000000000000000000000000201",
-	"00689918DBEC7E5A0DD6DFC0AA55C7",
-	"0095E9A9EC9B297BD4BF36E059184F",
-	"01A57A6A7B26CA5EF52FCDB8164797",
-	"00B3ADC94ED1FE674C06E695BABA1D",
-	"010000000000000108789B2496AF93", 2,
-	_EC_SECG_CHAR2_113R2_SEED, 20,
-	"SECG curve over a 113 bit binary field"
-	};
-
-static const unsigned char _EC_SECG_CHAR2_131R1_SEED[] = {
-	0x4D,0x69,0x6E,0x67,0x68,0x75,0x61,0x51,0x75,0x98,
-	0x5B,0xD3,0xAD,0xBA,0xDA,0x21,0xB4,0x3A,0x97,0xE2};
-static const EC_CURVE_DATA _EC_SECG_CHAR2_131R1 = {
-	NID_X9_62_characteristic_two_field,
-	"080000000000000000000000000000010D",
-	"07A11B09A76B562144418FF3FF8C2570B8",
-	"0217C05610884B63B9C6C7291678F9D341",
-	"0081BAF91FDF9833C40F9C181343638399",
-	"078C6E7EA38C001F73C8134B1B4EF9E150",
-	"0400000000000000023123953A9464B54D", 2,
-	_EC_SECG_CHAR2_131R1_SEED, 20,
-	"SECG/WTLS curve over a 131 bit binary field"
-	};
-
-static const unsigned char _EC_SECG_CHAR2_131R2_SEED[] = {
-	0x98,0x5B,0xD3,0xAD,0xBA,0xD4,0xD6,0x96,0xE6,0x76,
-	0x87,0x56,0x15,0x17,0x5A,0x21,0xB4,0x3A,0x97,0xE3};
-static const EC_CURVE_DATA _EC_SECG_CHAR2_131R2 = {
-	NID_X9_62_characteristic_two_field,
-	"080000000000000000000000000000010D",
-	"03E5A88919D7CAFCBF415F07C2176573B2",
-	"04B8266A46C55657AC734CE38F018F2192",
-	"0356DCD8F2F95031AD652D23951BB366A8",
-	"0648F06D867940A5366D9E265DE9EB240F",
-	"0400000000000000016954A233049BA98F", 2,
-	_EC_SECG_CHAR2_131R2_SEED, 20,
-	"SECG curve over a 131 bit binary field"
-	};
-
-static const EC_CURVE_DATA _EC_NIST_CHAR2_163K = {
-	NID_X9_62_characteristic_two_field,
-	"0800000000000000000000000000000000000000C9",
-	"1",
-	"1",
-	"02FE13C0537BBC11ACAA07D793DE4E6D5E5C94EEE8",
-	"0289070FB05D38FF58321F2E800536D538CCDAA3D9",
-	"04000000000000000000020108A2E0CC0D99F8A5EF", 2,
-	NULL, 0,
-	"NIST/SECG/WTLS curve over a 163 bit binary field"
-	};
-
-static const unsigned char _EC_SECG_CHAR2_163R1_SEED[] = {
-	0x24,0xB7,0xB1,0x37,0xC8,0xA1,0x4D,0x69,0x6E,0x67,
-	0x68,0x75,0x61,0x51,0x75,0x6F,0xD0,0xDA,0x2E,0x5C};
-static const EC_CURVE_DATA _EC_SECG_CHAR2_163R1 = {
-	NID_X9_62_characteristic_two_field,
-	"0800000000000000000000000000000000000000C9",
-	"07B6882CAAEFA84F9554FF8428BD88E246D2782AE2",
-	"0713612DCDDCB40AAB946BDA29CA91F73AF958AFD9",
-	"0369979697AB43897789566789567F787A7876A654",
-	"00435EDB42EFAFB2989D51FEFCE3C80988F41FF883",
-	"03FFFFFFFFFFFFFFFFFFFF48AAB689C29CA710279B", 2,
-/* The algorithm used to derive the curve parameters from
- * the seed used here is slightly different than the
- * algorithm described in X9.62 .
- */
-#if 0
-	_EC_SECG_CHAR2_163R1_SEED, 20,
-#else
-	NULL, 0,
-#endif
-	"SECG curve over a 163 bit binary field"
-	};
-
-static const unsigned char _EC_NIST_CHAR2_163B_SEED[] = {
-	0x85,0xE2,0x5B,0xFE,0x5C,0x86,0x22,0x6C,0xDB,0x12,
-	0x01,0x6F,0x75,0x53,0xF9,0xD0,0xE6,0x93,0xA2,0x68};
-static const EC_CURVE_DATA _EC_NIST_CHAR2_163B ={
-	NID_X9_62_characteristic_two_field,
-	"0800000000000000000000000000000000000000C9",
-	"1",
-	"020A601907B8C953CA1481EB10512F78744A3205FD",
-	"03F0EBA16286A2D57EA0991168D4994637E8343E36",
-	"00D51FBC6C71A0094FA2CDD545B11C5C0C797324F1",
-	"040000000000000000000292FE77E70C12A4234C33", 2,
-/* The seed here was used to created the curve parameters in normal
- * basis representation (and not the polynomial representation used here) 
- */
-#if 0
-	_EC_NIST_CHAR2_163B_SEED, 20,
-#else
-	NULL, 0,
-#endif
-	"NIST/SECG curve over a 163 bit binary field"
-	};
-
-static const unsigned char _EC_SECG_CHAR2_193R1_SEED[] = {
-	0x10,0x3F,0xAE,0xC7,0x4D,0x69,0x6E,0x67,0x68,0x75,
-	0x61,0x51,0x75,0x77,0x7F,0xC5,0xB1,0x91,0xEF,0x30};
-static const EC_CURVE_DATA _EC_SECG_CHAR2_193R1 = {
-	NID_X9_62_characteristic_two_field,
-	"02000000000000000000000000000000000000000000008001",
-	"0017858FEB7A98975169E171F77B4087DE098AC8A911DF7B01",
-	"00FDFB49BFE6C3A89FACADAA7A1E5BBC7CC1C2E5D831478814",
-	"01F481BC5F0FF84A74AD6CDF6FDEF4BF6179625372D8C0C5E1",
-	"0025E399F2903712CCF3EA9E3A1AD17FB0B3201B6AF7CE1B05",
-	"01000000000000000000000000C7F34A778F443ACC920EBA49", 2,
-	_EC_SECG_CHAR2_193R1_SEED, 20,
-	"SECG curve over a 193 bit binary field"
-	};
-
-static const unsigned char _EC_SECG_CHAR2_193R2_SEED[] = {
-	0x10,0xB7,0xB4,0xD6,0x96,0xE6,0x76,0x87,0x56,0x15,
-	0x17,0x51,0x37,0xC8,0xA1,0x6F,0xD0,0xDA,0x22,0x11};
-static const EC_CURVE_DATA _EC_SECG_CHAR2_193R2 = {
-	NID_X9_62_characteristic_two_field,
-	"02000000000000000000000000000000000000000000008001",
-	"0163F35A5137C2CE3EA6ED8667190B0BC43ECD69977702709B",
-	"00C9BB9E8927D4D64C377E2AB2856A5B16E3EFB7F61D4316AE",
-	"00D9B67D192E0367C803F39E1A7E82CA14A651350AAE617E8F",
-	"01CE94335607C304AC29E7DEFBD9CA01F596F927224CDECF6C",
-	"010000000000000000000000015AAB561B005413CCD4EE99D5", 2,
-	_EC_SECG_CHAR2_193R2_SEED, 20,
-	"SECG curve over a 193 bit binary field"
-	};
-
-static const EC_CURVE_DATA _EC_NIST_CHAR2_233K = {
-	NID_X9_62_characteristic_two_field,
-	"020000000000000000000000000000000000000004000000000000000001",
-	"0",
-	"1",
-	"017232BA853A7E731AF129F22FF4149563A419C26BF50A4C9D6EEFAD6126",
-	"01DB537DECE819B7F70F555A67C427A8CD9BF18AEB9B56E0C11056FAE6A3",
-	"008000000000000000000000000000069D5BB915BCD46EFB1AD5F173ABDF", 4,
-	NULL, 0,
-	"NIST/SECG/WTLS curve over a 233 bit binary field"
-	};
-
-static const unsigned char _EC_NIST_CHAR2_233B_SEED[] = {
-	0x74,0xD5,0x9F,0xF0,0x7F,0x6B,0x41,0x3D,0x0E,0xA1,
-	0x4B,0x34,0x4B,0x20,0xA2,0xDB,0x04,0x9B,0x50,0xC3};
-static const EC_CURVE_DATA _EC_NIST_CHAR2_233B = {
-	NID_X9_62_characteristic_two_field,
-	"020000000000000000000000000000000000000004000000000000000001",
-	"000000000000000000000000000000000000000000000000000000000001",
-	"0066647EDE6C332C7F8C0923BB58213B333B20E9CE4281FE115F7D8F90AD",
-	"00FAC9DFCBAC8313BB2139F1BB755FEF65BC391F8B36F8F8EB7371FD558B",
-	"01006A08A41903350678E58528BEBF8A0BEFF867A7CA36716F7E01F81052",
-	"01000000000000000000000000000013E974E72F8A6922031D2603CFE0D7", 2,
-	_EC_NIST_CHAR2_233B_SEED, 20,
-	"NIST/SECG/WTLS curve over a 233 bit binary field"
-	};
-
-static const EC_CURVE_DATA _EC_SECG_CHAR2_239K1 = {
-	NID_X9_62_characteristic_two_field,
-	"800000000000000000004000000000000000000000000000000000000001",
-	"0",
-	"1",
-	"29A0B6A887A983E9730988A68727A8B2D126C44CC2CC7B2A6555193035DC",
-	"76310804F12E549BDB011C103089E73510ACB275FC312A5DC6B76553F0CA",
-	"2000000000000000000000000000005A79FEC67CB6E91F1C1DA800E478A5", 4,
-	NULL, 0,
-	"SECG curve over a 239 bit binary field"
-	};
-
-static const EC_CURVE_DATA _EC_NIST_CHAR2_283K = {
-	NID_X9_62_characteristic_two_field,
-	"080000000000000000000000000000000000000000000000000000000000000000001"
-	"0A1",
-	"0",
-	"1",
-	"0503213F78CA44883F1A3B8162F188E553CD265F23C1567A16876913B0C2AC2458492"
-	"836",
-	"01CCDA380F1C9E318D90F95D07E5426FE87E45C0E8184698E45962364E34116177DD2"
-	"259",
-	"01FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFE9AE2ED07577265DFF7F94451E061E163"
-	"C61", 4,
-	NULL, 20,
-	"NIST/SECG curve over a 283 bit binary field"
-	};
-
-static const unsigned char _EC_NIST_CHAR2_283B_SEED[] = {
-	0x77,0xE2,0xB0,0x73,0x70,0xEB,0x0F,0x83,0x2A,0x6D,
-	0xD5,0xB6,0x2D,0xFC,0x88,0xCD,0x06,0xBB,0x84,0xBE};
-static const EC_CURVE_DATA _EC_NIST_CHAR2_283B = {
-	NID_X9_62_characteristic_two_field,
-	"080000000000000000000000000000000000000000000000000000000000000000001"
-	"0A1",
-	"000000000000000000000000000000000000000000000000000000000000000000000"
-	"001",
-	"027B680AC8B8596DA5A4AF8A19A0303FCA97FD7645309FA2A581485AF6263E313B79A"
-	"2F5",
-	"05F939258DB7DD90E1934F8C70B0DFEC2EED25B8557EAC9C80E2E198F8CDBECD86B12"
-	"053",
-	"03676854FE24141CB98FE6D4B20D02B4516FF702350EDDB0826779C813F0DF45BE811"
-	"2F4",
-	"03FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFEF90399660FC938A90165B042A7CEFADB"
-	"307", 2,
-	_EC_NIST_CHAR2_283B_SEED, 20,
-	"NIST/SECG curve over a 283 bit binary field"
-	};
-
-static const EC_CURVE_DATA _EC_NIST_CHAR2_409K = {
-	NID_X9_62_characteristic_two_field,
-	"020000000000000000000000000000000000000000000000000000000000000000000"
-	"00000000000008000000000000000000001",
-	"0",
-	"1",
-	"0060F05F658F49C1AD3AB1890F7184210EFD0987E307C84C27ACCFB8F9F67CC2C4601"
-	"89EB5AAAA62EE222EB1B35540CFE9023746",
-	"01E369050B7C4E42ACBA1DACBF04299C3460782F918EA427E6325165E9EA10E3DA5F6"
-	"C42E9C55215AA9CA27A5863EC48D8E0286B",
-	"007FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFE5F83B2D4EA20400"
-	"EC4557D5ED3E3E7CA5B4B5C83B8E01E5FCF", 4,
-	NULL, 0,
-	"NIST/SECG curve over a 409 bit binary field"
-	};
-
-static const unsigned char _EC_NIST_CHAR2_409B_SEED[] = {
-	0x40,0x99,0xB5,0xA4,0x57,0xF9,0xD6,0x9F,0x79,0x21,
-	0x3D,0x09,0x4C,0x4B,0xCD,0x4D,0x42,0x62,0x21,0x0B};
-static const EC_CURVE_DATA _EC_NIST_CHAR2_409B = {
-	NID_X9_62_characteristic_two_field,
-	"020000000000000000000000000000000000000000000000000000000000000000000"
-	"00000000000008000000000000000000001",
-	"000000000000000000000000000000000000000000000000000000000000000000000"
-	"00000000000000000000000000000000001",
-	"0021A5C2C8EE9FEB5C4B9A753B7B476B7FD6422EF1F3DD674761FA99D6AC27C8A9A19"
-	"7B272822F6CD57A55AA4F50AE317B13545F",
-	"015D4860D088DDB3496B0C6064756260441CDE4AF1771D4DB01FFE5B34E59703DC255"
-	"A868A1180515603AEAB60794E54BB7996A7",
-	"0061B1CFAB6BE5F32BBFA78324ED106A7636B9C5A7BD198D0158AA4F5488D08F38514"
-	"F1FDF4B4F40D2181B3681C364BA0273C706",
-	"010000000000000000000000000000000000000000000000000001E2AAD6A612F3330"
-	"7BE5FA47C3C9E052F838164CD37D9A21173", 2,
-	_EC_NIST_CHAR2_409B_SEED, 20,
-	"NIST/SECG curve over a 409 bit binary field"
-	};
-
-static const EC_CURVE_DATA _EC_NIST_CHAR2_571K = {
-	NID_X9_62_characteristic_two_field,
-	"800000000000000000000000000000000000000000000000000000000000000000000"
-	"000000000000000000000000000000000000000000000000000000000000000000000"
-	"00425",
-	"0",
-	"1",
-	"026EB7A859923FBC82189631F8103FE4AC9CA2970012D5D46024804801841CA443709"
-	"58493B205E647DA304DB4CEB08CBBD1BA39494776FB988B47174DCA88C7E2945283A0"
-	"1C8972",
-	"0349DC807F4FBF374F4AEADE3BCA95314DD58CEC9F307A54FFC61EFC006D8A2C9D497"
-	"9C0AC44AEA74FBEBBB9F772AEDCB620B01A7BA7AF1B320430C8591984F601CD4C143E"
-	"F1C7A3",
-	"020000000000000000000000000000000000000000000000000000000000000000000"
-	"000131850E1F19A63E4B391A8DB917F4138B630D84BE5D639381E91DEB45CFE778F63"
-	"7C1001", 4,
-	NULL, 0,
-	"NIST/SECG curve over a 571 bit binary field"
-	};
-
-static const unsigned char _EC_NIST_CHAR2_571B_SEED[] = {
-	0x2A,0xA0,0x58,0xF7,0x3A,0x0E,0x33,0xAB,0x48,0x6B,
-	0x0F,0x61,0x04,0x10,0xC5,0x3A,0x7F,0x13,0x23,0x10};
-static const EC_CURVE_DATA _EC_NIST_CHAR2_571B = {
-	NID_X9_62_characteristic_two_field,
-	"800000000000000000000000000000000000000000000000000000000000000000000"
-	"000000000000000000000000000000000000000000000000000000000000000000000"
-	"00425",
-	"000000000000000000000000000000000000000000000000000000000000000000000"
-	"000000000000000000000000000000000000000000000000000000000000000000000"
-	"000001",
-	"02F40E7E2221F295DE297117B7F3D62F5C6A97FFCB8CEFF1CD6BA8CE4A9A18AD84FFA"
-	"BBD8EFA59332BE7AD6756A66E294AFD185A78FF12AA520E4DE739BACA0C7FFEFF7F29"
-	"55727A",
-	"0303001D34B856296C16C0D40D3CD7750A93D1D2955FA80AA5F40FC8DB7B2ABDBDE53"
-	"950F4C0D293CDD711A35B67FB1499AE60038614F1394ABFA3B4C850D927E1E7769C8E"
-	"EC2D19",
-	"037BF27342DA639B6DCCFFFEB73D69D78C6C27A6009CBBCA1980F8533921E8A684423"
-	"E43BAB08A576291AF8F461BB2A8B3531D2F0485C19B16E2F1516E23DD3C1A4827AF1B"
-	"8AC15B",
-	"03FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF"
-	"FFFE661CE18FF55987308059B186823851EC7DD9CA1161DE93D5174D66E8382E9BB2F"
-	"E84E47", 2,
-	_EC_NIST_CHAR2_571B_SEED, 20,
-	"NIST/SECG curve over a 571 bit binary field"
-	};
-
-static const unsigned char _EC_X9_62_CHAR2_163V1_SEED[] = {
-	0xD2,0xC0,0xFB,0x15,0x76,0x08,0x60,0xDE,0xF1,0xEE,
-	0xF4,0xD6,0x96,0xE6,0x76,0x87,0x56,0x15,0x17,0x54};
-static const EC_CURVE_DATA _EC_X9_62_CHAR2_163V1 = {
-	NID_X9_62_characteristic_two_field,
-	"080000000000000000000000000000000000000107",
-	"072546B5435234A422E0789675F432C89435DE5242",
-	"00C9517D06D5240D3CFF38C74B20B6CD4D6F9DD4D9",
-	"07AF69989546103D79329FCC3D74880F33BBE803CB",
-	"01EC23211B5966ADEA1D3F87F7EA5848AEF0B7CA9F",
-	"0400000000000000000001E60FC8821CC74DAEAFC1", 2,
-	_EC_X9_62_CHAR2_163V1_SEED, 20,
-	"X9.62 curve over a 163 bit binary field"
-	};
-
-static const unsigned char _EC_X9_62_CHAR2_163V2_SEED[] = {
-	0x53,0x81,0x4C,0x05,0x0D,0x44,0xD6,0x96,0xE6,0x76,
-	0x87,0x56,0x15,0x17,0x58,0x0C,0xA4,0xE2,0x9F,0xFD};
-static const EC_CURVE_DATA _EC_X9_62_CHAR2_163V2 = {
-	NID_X9_62_characteristic_two_field,
- 	"080000000000000000000000000000000000000107",
-	"0108B39E77C4B108BED981ED0E890E117C511CF072",
-	"0667ACEB38AF4E488C407433FFAE4F1C811638DF20",
-	"0024266E4EB5106D0A964D92C4860E2671DB9B6CC5",
-	"079F684DDF6684C5CD258B3890021B2386DFD19FC5",
-	"03FFFFFFFFFFFFFFFFFFFDF64DE1151ADBB78F10A7", 2,
-	_EC_X9_62_CHAR2_163V2_SEED, 20,
-	"X9.62 curve over a 163 bit binary field"
-	};
-
-static const unsigned char _EC_X9_62_CHAR2_163V3_SEED[] = {
-	0x50,0xCB,0xF1,0xD9,0x5C,0xA9,0x4D,0x69,0x6E,0x67,
-	0x68,0x75,0x61,0x51,0x75,0xF1,0x6A,0x36,0xA3,0xB8};
-static const EC_CURVE_DATA _EC_X9_62_CHAR2_163V3 = {
-	NID_X9_62_characteristic_two_field,
-	"080000000000000000000000000000000000000107",
-	"07A526C63D3E25A256A007699F5447E32AE456B50E",
-	"03F7061798EB99E238FD6F1BF95B48FEEB4854252B",
-	"02F9F87B7C574D0BDECF8A22E6524775F98CDEBDCB",
-	"05B935590C155E17EA48EB3FF3718B893DF59A05D0",
-	"03FFFFFFFFFFFFFFFFFFFE1AEE140F110AFF961309", 2,
-	_EC_X9_62_CHAR2_163V3_SEED, 20,
-	"X9.62 curve over a 163 bit binary field"
-	};
-
-static const EC_CURVE_DATA _EC_X9_62_CHAR2_176V1 = {
-	NID_X9_62_characteristic_two_field,
-	"0100000000000000000000000000000000080000000007",
-	"E4E6DB2995065C407D9D39B8D0967B96704BA8E9C90B",
-	"5DDA470ABE6414DE8EC133AE28E9BBD7FCEC0AE0FFF2",
-	"8D16C2866798B600F9F08BB4A8E860F3298CE04A5798",
-	"6FA4539C2DADDDD6BAB5167D61B436E1D92BB16A562C",
-	"00010092537397ECA4F6145799D62B0A19CE06FE26AD", 0xFF6E,
-	NULL, 0,
-	"X9.62 curve over a 176 bit binary field"
-	};
-
-static const unsigned char _EC_X9_62_CHAR2_191V1_SEED[] = {
-	0x4E,0x13,0xCA,0x54,0x27,0x44,0xD6,0x96,0xE6,0x76,
-	0x87,0x56,0x15,0x17,0x55,0x2F,0x27,0x9A,0x8C,0x84};
-static const EC_CURVE_DATA _EC_X9_62_CHAR2_191V1 = {
-	NID_X9_62_characteristic_two_field,
-	"800000000000000000000000000000000000000000000201",
-	"2866537B676752636A68F56554E12640276B649EF7526267",
-	"2E45EF571F00786F67B0081B9495A3D95462F5DE0AA185EC",
-	"36B3DAF8A23206F9C4F299D7B21A9C369137F2C84AE1AA0D",
-	"765BE73433B3F95E332932E70EA245CA2418EA0EF98018FB",
-	"40000000000000000000000004A20E90C39067C893BBB9A5", 2,
-	_EC_X9_62_CHAR2_191V1_SEED, 20,
-	"X9.62 curve over a 191 bit binary field"
-	};
-
-static const unsigned char _EC_X9_62_CHAR2_191V2_SEED[] = {
-	0x08,0x71,0xEF,0x2F,0xEF,0x24,0xD6,0x96,0xE6,0x76,
-	0x87,0x56,0x15,0x17,0x58,0xBE,0xE0,0xD9,0x5C,0x15};
-static const EC_CURVE_DATA _EC_X9_62_CHAR2_191V2 = {
-	NID_X9_62_characteristic_two_field,
-	"800000000000000000000000000000000000000000000201",
-	"401028774D7777C7B7666D1366EA432071274F89FF01E718",
-	"0620048D28BCBD03B6249C99182B7C8CD19700C362C46A01",
-	"3809B2B7CC1B28CC5A87926AAD83FD28789E81E2C9E3BF10",
-	"17434386626D14F3DBF01760D9213A3E1CF37AEC437D668A",
-	"20000000000000000000000050508CB89F652824E06B8173", 4,
-	_EC_X9_62_CHAR2_191V2_SEED, 20,
-	"X9.62 curve over a 191 bit binary field"
-	};
-
-static const unsigned char _EC_X9_62_CHAR2_191V3_SEED[] = {
-	0xE0,0x53,0x51,0x2D,0xC6,0x84,0xD6,0x96,0xE6,0x76,
-	0x87,0x56,0x15,0x17,0x50,0x67,0xAE,0x78,0x6D,0x1F};
-static const EC_CURVE_DATA _EC_X9_62_CHAR2_191V3 = {
-	NID_X9_62_characteristic_two_field,
-	"800000000000000000000000000000000000000000000201",
-	"6C01074756099122221056911C77D77E77A777E7E7E77FCB",
-	"71FE1AF926CF847989EFEF8DB459F66394D90F32AD3F15E8",
-	"375D4CE24FDE434489DE8746E71786015009E66E38A926DD",
-	"545A39176196575D985999366E6AD34CE0A77CD7127B06BE",
-	"155555555555555555555555610C0B196812BFB6288A3EA3", 6,
-	_EC_X9_62_CHAR2_191V3_SEED, 20,
-	"X9.62 curve over a 191 bit binary field"
-	};
-
-static const EC_CURVE_DATA _EC_X9_62_CHAR2_208W1 = {
-	NID_X9_62_characteristic_two_field,
-	"010000000000000000000000000000000800000000000000000007",
-	"0000000000000000000000000000000000000000000000000000",
-	"C8619ED45A62E6212E1160349E2BFA844439FAFC2A3FD1638F9E",
-	"89FDFBE4ABE193DF9559ECF07AC0CE78554E2784EB8C1ED1A57A",
-	"0F55B51A06E78E9AC38A035FF520D8B01781BEB1A6BB08617DE3",
-	"000101BAF95C9723C57B6C21DA2EFF2D5ED588BDD5717E212F9D", 0xFE48,
-	NULL, 0,
-	"X9.62 curve over a 208 bit binary field"
-	};
-
-static const unsigned char _EC_X9_62_CHAR2_239V1_SEED[] = {
-	0xD3,0x4B,0x9A,0x4D,0x69,0x6E,0x67,0x68,0x75,0x61,
-	0x51,0x75,0xCA,0x71,0xB9,0x20,0xBF,0xEF,0xB0,0x5D};
-static const EC_CURVE_DATA _EC_X9_62_CHAR2_239V1 = {
-	NID_X9_62_characteristic_two_field,
-	"800000000000000000000000000000000000000000000000001000000001",
-	"32010857077C5431123A46B808906756F543423E8D27877578125778AC76",
-	"790408F2EEDAF392B012EDEFB3392F30F4327C0CA3F31FC383C422AA8C16",
-	"57927098FA932E7C0A96D3FD5B706EF7E5F5C156E16B7E7C86038552E91D",
-	"61D8EE5077C33FECF6F1A16B268DE469C3C7744EA9A971649FC7A9616305",
-	"2000000000000000000000000000000F4D42FFE1492A4993F1CAD666E447", 4,
-	_EC_X9_62_CHAR2_239V1_SEED, 20,
-	"X9.62 curve over a 239 bit binary field"
-	};
-
-static const unsigned char _EC_X9_62_CHAR2_239V2_SEED[] = {
-	0x2A,0xA6,0x98,0x2F,0xDF,0xA4,0xD6,0x96,0xE6,0x76,
-	0x87,0x56,0x15,0x17,0x5D,0x26,0x67,0x27,0x27,0x7D};
-static const EC_CURVE_DATA _EC_X9_62_CHAR2_239V2 = {
-	NID_X9_62_characteristic_two_field,
-	"800000000000000000000000000000000000000000000000001000000001",
-	"4230017757A767FAE42398569B746325D45313AF0766266479B75654E65F",
-	"5037EA654196CFF0CD82B2C14A2FCF2E3FF8775285B545722F03EACDB74B",
-	"28F9D04E900069C8DC47A08534FE76D2B900B7D7EF31F5709F200C4CA205",
-	"5667334C45AFF3B5A03BAD9DD75E2C71A99362567D5453F7FA6E227EC833",
-	"1555555555555555555555555555553C6F2885259C31E3FCDF154624522D", 6,
-	_EC_X9_62_CHAR2_239V2_SEED, 20,
-	"X9.62 curve over a 239 bit binary field"
-	};
-
-static const unsigned char _EC_X9_62_CHAR2_239V3_SEED[] = {
-	0x9E,0x07,0x6F,0x4D,0x69,0x6E,0x67,0x68,0x75,0x61,
-	0x51,0x75,0xE1,0x1E,0x9F,0xDD,0x77,0xF9,0x20,0x41};
-static const EC_CURVE_DATA _EC_X9_62_CHAR2_239V3 = {
-	NID_X9_62_characteristic_two_field,
-	"800000000000000000000000000000000000000000000000001000000001",
-	"01238774666A67766D6676F778E676B66999176666E687666D8766C66A9F",
-	"6A941977BA9F6A435199ACFC51067ED587F519C5ECB541B8E44111DE1D40",
-	"70F6E9D04D289C4E89913CE3530BFDE903977D42B146D539BF1BDE4E9C92",
-	"2E5A0EAF6E5E1305B9004DCE5C0ED7FE59A35608F33837C816D80B79F461",
-	"0CCCCCCCCCCCCCCCCCCCCCCCCCCCCCAC4912D2D9DF903EF9888B8A0E4CFF", 0xA,
-	_EC_X9_62_CHAR2_239V3_SEED, 20,
-	"X9.62 curve over a 239 bit binary field"
-	};
-
-static const EC_CURVE_DATA _EC_X9_62_CHAR2_272W1 = {
-	NID_X9_62_characteristic_two_field,
-	"010000000000000000000000000000000000000000000000000000010000000000000"
-	"B",
-	"91A091F03B5FBA4AB2CCF49C4EDD220FB028712D42BE752B2C40094DBACDB586FB20",
-	"7167EFC92BB2E3CE7C8AAAFF34E12A9C557003D7C73A6FAF003F99F6CC8482E540F7",
-	"6108BABB2CEEBCF787058A056CBE0CFE622D7723A289E08A07AE13EF0D10D171DD8D",
-	"10C7695716851EEF6BA7F6872E6142FBD241B830FF5EFCACECCAB05E02005DDE9D23",
-	"000100FAF51354E0E39E4892DF6E319C72C8161603FA45AA7B998A167B8F1E629521",
-	0xFF06,
-	NULL, 0,
-	"X9.62 curve over a 272 bit binary field"
-	};
-
-static const EC_CURVE_DATA _EC_X9_62_CHAR2_304W1 = {
-	NID_X9_62_characteristic_two_field,
-	"010000000000000000000000000000000000000000000000000000000000000000000"
-	"000000807",
-	"FD0D693149A118F651E6DCE6802085377E5F882D1B510B44160074C1288078365A039"
-	"6C8E681",
-	"BDDB97E555A50A908E43B01C798EA5DAA6788F1EA2794EFCF57166B8C14039601E558"
-	"27340BE",
-	"197B07845E9BE2D96ADB0F5F3C7F2CFFBD7A3EB8B6FEC35C7FD67F26DDF6285A644F7"
-	"40A2614",
-	"E19FBEB76E0DA171517ECF401B50289BF014103288527A9B416A105E80260B549FDC1"
-	"B92C03B",
-	"000101D556572AABAC800101D556572AABAC8001022D5C91DD173F8FB561DA6899164"
-	"443051D", 0xFE2E,
-	NULL, 0,
-	"X9.62 curve over a 304 bit binary field"
-	};
-
-static const unsigned char _EC_X9_62_CHAR2_359V1_SEED[] = {
-	0x2B,0x35,0x49,0x20,0xB7,0x24,0xD6,0x96,0xE6,0x76,
-	0x87,0x56,0x15,0x17,0x58,0x5B,0xA1,0x33,0x2D,0xC6};
-static const EC_CURVE_DATA _EC_X9_62_CHAR2_359V1 = {
-	NID_X9_62_characteristic_two_field,
-	"800000000000000000000000000000000000000000000000000000000000000000000"
-	"000100000000000000001",
-	"5667676A654B20754F356EA92017D946567C46675556F19556A04616B567D223A5E05"
-	"656FB549016A96656A557",
-	"2472E2D0197C49363F1FE7F5B6DB075D52B6947D135D8CA445805D39BC34562608968"
-	"7742B6329E70680231988",
-	"3C258EF3047767E7EDE0F1FDAA79DAEE3841366A132E163ACED4ED2401DF9C6BDCDE9"
-	"8E8E707C07A2239B1B097",
-	"53D7E08529547048121E9C95F3791DD804963948F34FAE7BF44EA82365DC7868FE57E"
-	"4AE2DE211305A407104BD",
-	"01AF286BCA1AF286BCA1AF286BCA1AF286BCA1AF286BC9FB8F6B85C556892C20A7EB9"
-	"64FE7719E74F490758D3B", 0x4C,
-	_EC_X9_62_CHAR2_359V1_SEED, 20,
-	"X9.62 curve over a 359 bit binary field"
-	};
-
-static const EC_CURVE_DATA _EC_X9_62_CHAR2_368W1 = {
-	NID_X9_62_characteristic_two_field,
-	"010000000000000000000000000000000000000000000000000000000000000000000"
-	"0002000000000000000000007",
-	"E0D2EE25095206F5E2A4F9ED229F1F256E79A0E2B455970D8D0D865BD94778C576D62"
-	"F0AB7519CCD2A1A906AE30D",
-	"FC1217D4320A90452C760A58EDCD30C8DD069B3C34453837A34ED50CB54917E1C2112"
-	"D84D164F444F8F74786046A",
-	"1085E2755381DCCCE3C1557AFA10C2F0C0C2825646C5B34A394CBCFA8BC16B22E7E78"
-	"9E927BE216F02E1FB136A5F",
-	"7B3EB1BDDCBA62D5D8B2059B525797FC73822C59059C623A45FF3843CEE8F87CD1855"
-	"ADAA81E2A0750B80FDA2310",
-	"00010090512DA9AF72B08349D98A5DD4C7B0532ECA51CE03E2D10F3B7AC579BD87E90"
-	"9AE40A6F131E9CFCE5BD967", 0xFF70,
-	NULL, 0,
-	"X9.62 curve over a 368 bit binary field"
-	};
-
-static const EC_CURVE_DATA _EC_X9_62_CHAR2_431R1 = {
-	NID_X9_62_characteristic_two_field,
-	"800000000000000000000000000000000000000000000000000000000000000000000"
-	"000000001000000000000000000000000000001",
-	"1A827EF00DD6FC0E234CAF046C6A5D8A85395B236CC4AD2CF32A0CADBDC9DDF620B0E"
-	"B9906D0957F6C6FEACD615468DF104DE296CD8F",
-	"10D9B4A3D9047D8B154359ABFB1B7F5485B04CEB868237DDC9DEDA982A679A5A919B6"
-	"26D4E50A8DD731B107A9962381FB5D807BF2618",
-	"120FC05D3C67A99DE161D2F4092622FECA701BE4F50F4758714E8A87BBF2A658EF8C2"
-	"1E7C5EFE965361F6C2999C0C247B0DBD70CE6B7",
-	"20D0AF8903A96F8D5FA2C255745D3C451B302C9346D9B7E485E7BCE41F6B591F3E8F6"
-	"ADDCBB0BC4C2F947A7DE1A89B625D6A598B3760",
-	"0340340340340340340340340340340340340340340340340340340323C313FAB5058"
-	"9703B5EC68D3587FEC60D161CC149C1AD4A91", 0x2760,
-	NULL, 0,
-	"X9.62 curve over a 431 bit binary field"
-	};
-
-static const EC_CURVE_DATA _EC_WTLS_1 = {
-	NID_X9_62_characteristic_two_field,
-	"020000000000000000000000000201",
-	"1",
-	"1",
-	"01667979A40BA497E5D5C270780617",
-	"00F44B4AF1ECC2630E08785CEBCC15",
-	"00FFFFFFFFFFFFFFFDBF91AF6DEA73", 2,
-	NULL, 0,
-	"WTLS curve over a 113 bit binary field"
-	};
-
-/* IPSec curves */
-/* NOTE: The of curves over a extension field of non prime degree
- * is not recommended (Weil-descent).
- * As the group order is not a prime this curve is not suitable
- * for ECDSA.
- */
-static const EC_CURVE_DATA _EC_IPSEC_155_ID3 = {
-	NID_X9_62_characteristic_two_field,
-	"0800000000000000000000004000000000000001",
-	"0",
-	"07338f",
-	"7b",
-	"1c8",
-	"2AAAAAAAAAAAAAAAAAAC7F3C7881BD0868FA86C",3,
-	NULL, 0,
-	"\n\tIPSec/IKE/Oakley curve #3 over a 155 bit binary field.\n"
-	"\tNot suitable for ECDSA.\n\tQuestionable extension field!"
-	};
-
-/* NOTE: The of curves over a extension field of non prime degree
- * is not recommended (Weil-descent).
- * As the group order is not a prime this curve is not suitable
- * for ECDSA.
- */
-static const EC_CURVE_DATA _EC_IPSEC_185_ID4 = {
-	NID_X9_62_characteristic_two_field,
-	"020000000000000000000000000000200000000000000001",
-	"0",
-	"1ee9",
-	"18",
-	"0d",
-	"FFFFFFFFFFFFFFFFFFFFFFEDF97C44DB9F2420BAFCA75E",2,
-	NULL, 0,
-	"\n\tIPSec/IKE/Oakley curve #4 over a 185 bit binary field.\n"
-	"\tNot suitable for ECDSA.\n\tQuestionable extension field!"
-	};
-
-typedef struct _ec_list_element_st {
-	int	nid;
-	const EC_CURVE_DATA *data;
-	} ec_list_element;
-
-static const ec_list_element curve_list[] = {
-	/* prime field curves */	
-	/* secg curves */
-	{ NID_secp112r1, &_EC_SECG_PRIME_112R1},
-	{ NID_secp112r2, &_EC_SECG_PRIME_112R2},
-	{ NID_secp128r1, &_EC_SECG_PRIME_128R1},
-	{ NID_secp128r2, &_EC_SECG_PRIME_128R2},
-	{ NID_secp160k1, &_EC_SECG_PRIME_160K1},
-	{ NID_secp160r1, &_EC_SECG_PRIME_160R1},
-	{ NID_secp160r2, &_EC_SECG_PRIME_160R2},
-	/* SECG secp192r1 is the same as X9.62 prime192v1 and hence omitted */
-	{ NID_secp192k1, &_EC_SECG_PRIME_192K1},
-	{ NID_secp224k1, &_EC_SECG_PRIME_224K1},
-	{ NID_secp224r1, &_EC_NIST_PRIME_224},
-	{ NID_secp256k1, &_EC_SECG_PRIME_256K1},
-	/* SECG secp256r1 is the same as X9.62 prime256v1 and hence omitted */
-	{ NID_secp384r1, &_EC_NIST_PRIME_384},
-	{ NID_secp521r1, &_EC_NIST_PRIME_521},
-	/* X9.62 curves */
-	{ NID_X9_62_prime192v1, &_EC_NIST_PRIME_192},
-	{ NID_X9_62_prime192v2, &_EC_X9_62_PRIME_192V2},
-	{ NID_X9_62_prime192v3, &_EC_X9_62_PRIME_192V3},
-	{ NID_X9_62_prime239v1, &_EC_X9_62_PRIME_239V1},
-	{ NID_X9_62_prime239v2, &_EC_X9_62_PRIME_239V2},
-	{ NID_X9_62_prime239v3, &_EC_X9_62_PRIME_239V3},
-	{ NID_X9_62_prime256v1, &_EC_X9_62_PRIME_256V1},
-	/* characteristic two field curves */
-	/* NIST/SECG curves */
-	{ NID_sect113r1, &_EC_SECG_CHAR2_113R1},
-	{ NID_sect113r2, &_EC_SECG_CHAR2_113R2},
-	{ NID_sect131r1, &_EC_SECG_CHAR2_131R1},
-	{ NID_sect131r2, &_EC_SECG_CHAR2_131R2},
-	{ NID_sect163k1, &_EC_NIST_CHAR2_163K },
-	{ NID_sect163r1, &_EC_SECG_CHAR2_163R1},
-	{ NID_sect163r2, &_EC_NIST_CHAR2_163B },
-	{ NID_sect193r1, &_EC_SECG_CHAR2_193R1},
-	{ NID_sect193r2, &_EC_SECG_CHAR2_193R2},
-	{ NID_sect233k1, &_EC_NIST_CHAR2_233K },
-	{ NID_sect233r1, &_EC_NIST_CHAR2_233B },
-	{ NID_sect239k1, &_EC_SECG_CHAR2_239K1},
-	{ NID_sect283k1, &_EC_NIST_CHAR2_283K },
-	{ NID_sect283r1, &_EC_NIST_CHAR2_283B },
-	{ NID_sect409k1, &_EC_NIST_CHAR2_409K },
-	{ NID_sect409r1, &_EC_NIST_CHAR2_409B },
-	{ NID_sect571k1, &_EC_NIST_CHAR2_571K },
-	{ NID_sect571r1, &_EC_NIST_CHAR2_571B },
-	/* X9.62 curves */
-	{ NID_X9_62_c2pnb163v1, &_EC_X9_62_CHAR2_163V1},
-	{ NID_X9_62_c2pnb163v2, &_EC_X9_62_CHAR2_163V2},
-	{ NID_X9_62_c2pnb163v3, &_EC_X9_62_CHAR2_163V3},
-	{ NID_X9_62_c2pnb176v1, &_EC_X9_62_CHAR2_176V1},
-	{ NID_X9_62_c2tnb191v1, &_EC_X9_62_CHAR2_191V1},
-	{ NID_X9_62_c2tnb191v2, &_EC_X9_62_CHAR2_191V2},
-	{ NID_X9_62_c2tnb191v3, &_EC_X9_62_CHAR2_191V3},
-	{ NID_X9_62_c2pnb208w1, &_EC_X9_62_CHAR2_208W1},
-	{ NID_X9_62_c2tnb239v1, &_EC_X9_62_CHAR2_239V1},
-	{ NID_X9_62_c2tnb239v2, &_EC_X9_62_CHAR2_239V2},
-	{ NID_X9_62_c2tnb239v3, &_EC_X9_62_CHAR2_239V3},
-	{ NID_X9_62_c2pnb272w1, &_EC_X9_62_CHAR2_272W1},
-	{ NID_X9_62_c2pnb304w1, &_EC_X9_62_CHAR2_304W1},
-	{ NID_X9_62_c2tnb359v1, &_EC_X9_62_CHAR2_359V1},
-	{ NID_X9_62_c2pnb368w1, &_EC_X9_62_CHAR2_368W1},
-	{ NID_X9_62_c2tnb431r1, &_EC_X9_62_CHAR2_431R1},
-	/* the WAP/WTLS curves
-	 * [unlike SECG, spec has its own OIDs for curves from X9.62] */
-	{ NID_wap_wsg_idm_ecid_wtls1, &_EC_WTLS_1},
-	{ NID_wap_wsg_idm_ecid_wtls3, &_EC_NIST_CHAR2_163K},
-	{ NID_wap_wsg_idm_ecid_wtls4, &_EC_SECG_CHAR2_113R1},
-	{ NID_wap_wsg_idm_ecid_wtls5, &_EC_X9_62_CHAR2_163V1},
-	{ NID_wap_wsg_idm_ecid_wtls6, &_EC_SECG_PRIME_112R1},
-	{ NID_wap_wsg_idm_ecid_wtls7, &_EC_SECG_PRIME_160R2},
-	{ NID_wap_wsg_idm_ecid_wtls8, &_EC_WTLS_8},
-	{ NID_wap_wsg_idm_ecid_wtls9, &_EC_WTLS_9 },
-	{ NID_wap_wsg_idm_ecid_wtls10, &_EC_NIST_CHAR2_233K},
-	{ NID_wap_wsg_idm_ecid_wtls11, &_EC_NIST_CHAR2_233B},
-	{ NID_wap_wsg_idm_ecid_wtls12, &_EC_WTLS_12},
-	/* IPSec curves */
-	{ NID_ipsec3, &_EC_IPSEC_155_ID3},
-	{ NID_ipsec4, &_EC_IPSEC_185_ID4},
-};
-
-static size_t curve_list_length = sizeof(curve_list)/sizeof(ec_list_element);
-
-static EC_GROUP *ec_group_new_from_data(const EC_CURVE_DATA *data)
-	{
-	EC_GROUP *group=NULL;
-	EC_POINT *P=NULL;
-	BN_CTX	 *ctx=NULL;
-	BIGNUM 	 *p=NULL, *a=NULL, *b=NULL, *x=NULL, *y=NULL, *order=NULL;
-	int	 ok=0;
-
-	if ((ctx = BN_CTX_new()) == NULL)
-		{
-		ECerr(EC_F_EC_GROUP_NEW_FROM_DATA, ERR_R_MALLOC_FAILURE);
-		goto err;
-		}
-	if ((p = BN_new()) == NULL || (a = BN_new()) == NULL || 
-		(b = BN_new()) == NULL || (x = BN_new()) == NULL ||
-		(y = BN_new()) == NULL || (order = BN_new()) == NULL)
-		{
-		ECerr(EC_F_EC_GROUP_NEW_FROM_DATA, ERR_R_MALLOC_FAILURE);
-		goto err;
-		}
-	
-	if (!BN_hex2bn(&p, data->p) || !BN_hex2bn(&a, data->a)
-		|| !BN_hex2bn(&b, data->b))
-		{
-		ECerr(EC_F_EC_GROUP_NEW_FROM_DATA, ERR_R_BN_LIB);
-		goto err;
-		}
-
-	if (data->field_type == NID_X9_62_prime_field)
-		{
-		if ((group = EC_GROUP_new_curve_GFp(p, a, b, ctx)) == NULL)
-			{
-			ECerr(EC_F_EC_GROUP_NEW_FROM_DATA, ERR_R_EC_LIB);
-			goto err;
-			}
-		}
-		else
-		{ /* field_type == NID_X9_62_characteristic_two_field */
-		if ((group = EC_GROUP_new_curve_GF2m(p, a, b, ctx)) == NULL)
-			{
-			ECerr(EC_F_EC_GROUP_NEW_FROM_DATA, ERR_R_EC_LIB);
-			goto err;
-			}
-		}
-
-	if ((P = EC_POINT_new(group)) == NULL)
-		{
-		ECerr(EC_F_EC_GROUP_NEW_FROM_DATA, ERR_R_EC_LIB);
-		goto err;
-		}
-	
-	if (!BN_hex2bn(&x, data->x) || !BN_hex2bn(&y, data->y))
-		{
-		ECerr(EC_F_EC_GROUP_NEW_FROM_DATA, ERR_R_BN_LIB);
-		goto err;
-		}
-	if (!EC_POINT_set_affine_coordinates_GF2m(group, P, x, y, ctx))
-		{
-		ECerr(EC_F_EC_GROUP_NEW_FROM_DATA, ERR_R_EC_LIB);
-		goto err;
-		}
-	if (!BN_hex2bn(&order, data->order) || !BN_set_word(x, data->cofactor))
-		{
-		ECerr(EC_F_EC_GROUP_NEW_FROM_DATA, ERR_R_BN_LIB);
-		goto err;
-		}
-	if (!EC_GROUP_set_generator(group, P, order, x))
-		{
-		ECerr(EC_F_EC_GROUP_NEW_FROM_DATA, ERR_R_EC_LIB);
-		goto err;
-		}
-	if (data->seed)
-		{
-		if (!EC_GROUP_set_seed(group, data->seed, data->seed_len))
-			{
-			ECerr(EC_F_EC_GROUP_NEW_FROM_DATA, ERR_R_EC_LIB);
-			goto err;
-			}
-		}
-	ok=1;
-err:
-	if (!ok)
-		{
-		EC_GROUP_free(group);
-		group = NULL;
-		}
-	if (P)
-		EC_POINT_free(P);
-	if (ctx)
-		BN_CTX_free(ctx);
-	if (p)
-		BN_free(p);
-	if (a)
-		BN_free(a);
-	if (b)
-		BN_free(b);
-	if (order)
-		BN_free(order);
-	if (x)
-		BN_free(x);
-	if (y)
-		BN_free(y);
-	return group;
-	}
-
-EC_GROUP *EC_GROUP_new_by_curve_name(int nid)
-	{
-	size_t i;
-	EC_GROUP *ret = NULL;
-
-	if (nid <= 0)
-		return NULL;
-
-	for (i=0; i<curve_list_length; i++)
-		if (curve_list[i].nid == nid)
-			{
-			ret = ec_group_new_from_data(curve_list[i].data);
-			break;
-			}
-
-	if (ret == NULL)
-		{
-		ECerr(EC_F_EC_GROUP_NEW_BY_CURVE_NAME, EC_R_UNKNOWN_GROUP);
-		return NULL;
-		}
-
-	EC_GROUP_set_curve_name(ret, nid);
-
-	return ret;
-	}
-
-size_t EC_get_builtin_curves(EC_builtin_curve *r, size_t nitems)
-	{
-	size_t	i, min;
-
-	if (r == NULL || nitems == 0)
-		return curve_list_length;
-
-	min = nitems < curve_list_length ? nitems : curve_list_length;
-
-	for (i = 0; i < min; i++)
-		{
-		r[i].nid = curve_list[i].nid;
-		r[i].comment = curve_list[i].data->comment;
-		}
-
-	return curve_list_length;
-	}
diff --git a/crypto/openssl/crypto/ec/ec_cvt.c b/crypto/openssl/crypto/ec/ec_cvt.c
deleted file mode 100644
index d45640bab902..000000000000
--- a/crypto/openssl/crypto/ec/ec_cvt.c
+++ /dev/null
@@ -1,144 +0,0 @@
-/* crypto/ec/ec_cvt.c */
-/*
- * Originally written by Bodo Moeller for the OpenSSL project.
- */
-/* ====================================================================
- * Copyright (c) 1998-2002 The OpenSSL Project.  All rights reserved.
- *
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions
- * are met:
- *
- * 1. Redistributions of source code must retain the above copyright
- *    notice, this list of conditions and the following disclaimer. 
- *
- * 2. Redistributions in binary form must reproduce the above copyright
- *    notice, this list of conditions and the following disclaimer in
- *    the documentation and/or other materials provided with the
- *    distribution.
- *
- * 3. All advertising materials mentioning features or use of this
- *    software must display the following acknowledgment:
- *    "This product includes software developed by the OpenSSL Project
- *    for use in the OpenSSL Toolkit. (http://www.openssl.org/)"
- *
- * 4. The names "OpenSSL Toolkit" and "OpenSSL Project" must not be used to
- *    endorse or promote products derived from this software without
- *    prior written permission. For written permission, please contact
- *    openssl-core@openssl.org.
- *
- * 5. Products derived from this software may not be called "OpenSSL"
- *    nor may "OpenSSL" appear in their names without prior written
- *    permission of the OpenSSL Project.
- *
- * 6. Redistributions of any form whatsoever must retain the following
- *    acknowledgment:
- *    "This product includes software developed by the OpenSSL Project
- *    for use in the OpenSSL Toolkit (http://www.openssl.org/)"
- *
- * THIS SOFTWARE IS PROVIDED BY THE OpenSSL PROJECT ``AS IS'' AND ANY
- * EXPRESSED OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
- * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR
- * PURPOSE ARE DISCLAIMED.  IN NO EVENT SHALL THE OpenSSL PROJECT OR
- * ITS CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
- * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
- * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
- * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
- * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
- * STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
- * ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED
- * OF THE POSSIBILITY OF SUCH DAMAGE.
- * ====================================================================
- *
- * This product includes cryptographic software written by Eric Young
- * (eay@cryptsoft.com).  This product includes software written by Tim
- * Hudson (tjh@cryptsoft.com).
- *
- */
-/* ====================================================================
- * Copyright 2002 Sun Microsystems, Inc. ALL RIGHTS RESERVED.
- *
- * Portions of the attached software ("Contribution") are developed by 
- * SUN MICROSYSTEMS, INC., and are contributed to the OpenSSL project.
- *
- * The Contribution is licensed pursuant to the OpenSSL open source
- * license provided above.
- *
- * The elliptic curve binary polynomial software is originally written by
- * Sheueling Chang Shantz and Douglas Stebila of Sun Microsystems Laboratories.
- *
- */
-
-#include <openssl/err.h>
-#include "ec_lcl.h"
-
-
-EC_GROUP *EC_GROUP_new_curve_GFp(const BIGNUM *p, const BIGNUM *a, const BIGNUM *b, BN_CTX *ctx)
-	{
-	const EC_METHOD *meth;
-	EC_GROUP *ret;
-
-	meth = EC_GFp_nist_method();
-	
-	ret = EC_GROUP_new(meth);
-	if (ret == NULL)
-		return NULL;
-
-	if (!EC_GROUP_set_curve_GFp(ret, p, a, b, ctx))
-		{
-		unsigned long err;
-		  
-		err = ERR_peek_last_error();
-
-		if (!(ERR_GET_LIB(err) == ERR_LIB_EC &&
-			((ERR_GET_REASON(err) == EC_R_NOT_A_NIST_PRIME) ||
-			 (ERR_GET_REASON(err) == EC_R_NOT_A_SUPPORTED_NIST_PRIME))))
-			{
-			/* real error */
-			
-			EC_GROUP_clear_free(ret);
-			return NULL;
-			}
-			
-		
-		/* not an actual error, we just cannot use EC_GFp_nist_method */
-
-		ERR_clear_error();
-
-		EC_GROUP_clear_free(ret);
-		meth = EC_GFp_mont_method();
-
-		ret = EC_GROUP_new(meth);
-		if (ret == NULL)
-			return NULL;
-
-		if (!EC_GROUP_set_curve_GFp(ret, p, a, b, ctx))
-			{
-			EC_GROUP_clear_free(ret);
-			return NULL;
-			}
-		}
-
-	return ret;
-	}
-
-
-EC_GROUP *EC_GROUP_new_curve_GF2m(const BIGNUM *p, const BIGNUM *a, const BIGNUM *b, BN_CTX *ctx)
-	{
-	const EC_METHOD *meth;
-	EC_GROUP *ret;
-	
-	meth = EC_GF2m_simple_method();
-	
-	ret = EC_GROUP_new(meth);
-	if (ret == NULL)
-		return NULL;
-
-	if (!EC_GROUP_set_curve_GF2m(ret, p, a, b, ctx))
-		{
-		EC_GROUP_clear_free(ret);
-		return NULL;
-		}
-
-	return ret;
-	}
diff --git a/crypto/openssl/crypto/ec/ec_err.c b/crypto/openssl/crypto/ec/ec_err.c
deleted file mode 100644
index 7be315bac926..000000000000
--- a/crypto/openssl/crypto/ec/ec_err.c
+++ /dev/null
@@ -1,238 +0,0 @@
-/* crypto/ec/ec_err.c */
-/* ====================================================================
- * Copyright (c) 1999-2005 The OpenSSL Project.  All rights reserved.
- *
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions
- * are met:
- *
- * 1. Redistributions of source code must retain the above copyright
- *    notice, this list of conditions and the following disclaimer. 
- *
- * 2. Redistributions in binary form must reproduce the above copyright
- *    notice, this list of conditions and the following disclaimer in
- *    the documentation and/or other materials provided with the
- *    distribution.
- *
- * 3. All advertising materials mentioning features or use of this
- *    software must display the following acknowledgment:
- *    "This product includes software developed by the OpenSSL Project
- *    for use in the OpenSSL Toolkit. (http://www.OpenSSL.org/)"
- *
- * 4. The names "OpenSSL Toolkit" and "OpenSSL Project" must not be used to
- *    endorse or promote products derived from this software without
- *    prior written permission. For written permission, please contact
- *    openssl-core@OpenSSL.org.
- *
- * 5. Products derived from this software may not be called "OpenSSL"
- *    nor may "OpenSSL" appear in their names without prior written
- *    permission of the OpenSSL Project.
- *
- * 6. Redistributions of any form whatsoever must retain the following
- *    acknowledgment:
- *    "This product includes software developed by the OpenSSL Project
- *    for use in the OpenSSL Toolkit (http://www.OpenSSL.org/)"
- *
- * THIS SOFTWARE IS PROVIDED BY THE OpenSSL PROJECT ``AS IS'' AND ANY
- * EXPRESSED OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
- * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR
- * PURPOSE ARE DISCLAIMED.  IN NO EVENT SHALL THE OpenSSL PROJECT OR
- * ITS CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
- * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
- * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
- * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
- * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
- * STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
- * ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED
- * OF THE POSSIBILITY OF SUCH DAMAGE.
- * ====================================================================
- *
- * This product includes cryptographic software written by Eric Young
- * (eay@cryptsoft.com).  This product includes software written by Tim
- * Hudson (tjh@cryptsoft.com).
- *
- */
-
-/* NOTE: this file was auto generated by the mkerr.pl script: any changes
- * made to it will be overwritten when the script next updates this file,
- * only reason strings will be preserved.
- */
-
-#include <stdio.h>
-#include <openssl/err.h>
-#include <openssl/ec.h>
-
-/* BEGIN ERROR CODES */
-#ifndef OPENSSL_NO_ERR
-
-#define ERR_FUNC(func) ERR_PACK(ERR_LIB_EC,func,0)
-#define ERR_REASON(reason) ERR_PACK(ERR_LIB_EC,0,reason)
-
-static ERR_STRING_DATA EC_str_functs[]=
-	{
-{ERR_FUNC(EC_F_COMPUTE_WNAF),	"COMPUTE_WNAF"},
-{ERR_FUNC(EC_F_D2I_ECPARAMETERS),	"d2i_ECParameters"},
-{ERR_FUNC(EC_F_D2I_ECPKPARAMETERS),	"d2i_ECPKParameters"},
-{ERR_FUNC(EC_F_D2I_ECPRIVATEKEY),	"d2i_ECPrivateKey"},
-{ERR_FUNC(EC_F_ECPARAMETERS_PRINT),	"ECParameters_print"},
-{ERR_FUNC(EC_F_ECPARAMETERS_PRINT_FP),	"ECParameters_print_fp"},
-{ERR_FUNC(EC_F_ECPKPARAMETERS_PRINT),	"ECPKParameters_print"},
-{ERR_FUNC(EC_F_ECPKPARAMETERS_PRINT_FP),	"ECPKParameters_print_fp"},
-{ERR_FUNC(EC_F_ECP_NIST_MOD_192),	"ECP_NIST_MOD_192"},
-{ERR_FUNC(EC_F_ECP_NIST_MOD_224),	"ECP_NIST_MOD_224"},
-{ERR_FUNC(EC_F_ECP_NIST_MOD_256),	"ECP_NIST_MOD_256"},
-{ERR_FUNC(EC_F_ECP_NIST_MOD_521),	"ECP_NIST_MOD_521"},
-{ERR_FUNC(EC_F_EC_ASN1_GROUP2CURVE),	"EC_ASN1_GROUP2CURVE"},
-{ERR_FUNC(EC_F_EC_ASN1_GROUP2FIELDID),	"EC_ASN1_GROUP2FIELDID"},
-{ERR_FUNC(EC_F_EC_ASN1_GROUP2PARAMETERS),	"EC_ASN1_GROUP2PARAMETERS"},
-{ERR_FUNC(EC_F_EC_ASN1_GROUP2PKPARAMETERS),	"EC_ASN1_GROUP2PKPARAMETERS"},
-{ERR_FUNC(EC_F_EC_ASN1_PARAMETERS2GROUP),	"EC_ASN1_PARAMETERS2GROUP"},
-{ERR_FUNC(EC_F_EC_ASN1_PKPARAMETERS2GROUP),	"EC_ASN1_PKPARAMETERS2GROUP"},
-{ERR_FUNC(EC_F_EC_EX_DATA_SET_DATA),	"EC_EX_DATA_set_data"},
-{ERR_FUNC(EC_F_EC_GF2M_MONTGOMERY_POINT_MULTIPLY),	"EC_GF2M_MONTGOMERY_POINT_MULTIPLY"},
-{ERR_FUNC(EC_F_EC_GF2M_SIMPLE_GROUP_CHECK_DISCRIMINANT),	"ec_GF2m_simple_group_check_discriminant"},
-{ERR_FUNC(EC_F_EC_GF2M_SIMPLE_GROUP_SET_CURVE),	"ec_GF2m_simple_group_set_curve"},
-{ERR_FUNC(EC_F_EC_GF2M_SIMPLE_OCT2POINT),	"ec_GF2m_simple_oct2point"},
-{ERR_FUNC(EC_F_EC_GF2M_SIMPLE_POINT2OCT),	"ec_GF2m_simple_point2oct"},
-{ERR_FUNC(EC_F_EC_GF2M_SIMPLE_POINT_GET_AFFINE_COORDINATES),	"ec_GF2m_simple_point_get_affine_coordinates"},
-{ERR_FUNC(EC_F_EC_GF2M_SIMPLE_POINT_SET_AFFINE_COORDINATES),	"ec_GF2m_simple_point_set_affine_coordinates"},
-{ERR_FUNC(EC_F_EC_GF2M_SIMPLE_SET_COMPRESSED_COORDINATES),	"ec_GF2m_simple_set_compressed_coordinates"},
-{ERR_FUNC(EC_F_EC_GFP_MONT_FIELD_DECODE),	"ec_GFp_mont_field_decode"},
-{ERR_FUNC(EC_F_EC_GFP_MONT_FIELD_ENCODE),	"ec_GFp_mont_field_encode"},
-{ERR_FUNC(EC_F_EC_GFP_MONT_FIELD_MUL),	"ec_GFp_mont_field_mul"},
-{ERR_FUNC(EC_F_EC_GFP_MONT_FIELD_SET_TO_ONE),	"ec_GFp_mont_field_set_to_one"},
-{ERR_FUNC(EC_F_EC_GFP_MONT_FIELD_SQR),	"ec_GFp_mont_field_sqr"},
-{ERR_FUNC(EC_F_EC_GFP_MONT_GROUP_SET_CURVE),	"ec_GFp_mont_group_set_curve"},
-{ERR_FUNC(EC_F_EC_GFP_MONT_GROUP_SET_CURVE_GFP),	"EC_GFP_MONT_GROUP_SET_CURVE_GFP"},
-{ERR_FUNC(EC_F_EC_GFP_NIST_FIELD_MUL),	"ec_GFp_nist_field_mul"},
-{ERR_FUNC(EC_F_EC_GFP_NIST_FIELD_SQR),	"ec_GFp_nist_field_sqr"},
-{ERR_FUNC(EC_F_EC_GFP_NIST_GROUP_SET_CURVE),	"ec_GFp_nist_group_set_curve"},
-{ERR_FUNC(EC_F_EC_GFP_SIMPLE_GROUP_CHECK_DISCRIMINANT),	"ec_GFp_simple_group_check_discriminant"},
-{ERR_FUNC(EC_F_EC_GFP_SIMPLE_GROUP_SET_CURVE),	"ec_GFp_simple_group_set_curve"},
-{ERR_FUNC(EC_F_EC_GFP_SIMPLE_GROUP_SET_CURVE_GFP),	"EC_GFP_SIMPLE_GROUP_SET_CURVE_GFP"},
-{ERR_FUNC(EC_F_EC_GFP_SIMPLE_GROUP_SET_GENERATOR),	"EC_GFP_SIMPLE_GROUP_SET_GENERATOR"},
-{ERR_FUNC(EC_F_EC_GFP_SIMPLE_MAKE_AFFINE),	"ec_GFp_simple_make_affine"},
-{ERR_FUNC(EC_F_EC_GFP_SIMPLE_OCT2POINT),	"ec_GFp_simple_oct2point"},
-{ERR_FUNC(EC_F_EC_GFP_SIMPLE_POINT2OCT),	"ec_GFp_simple_point2oct"},
-{ERR_FUNC(EC_F_EC_GFP_SIMPLE_POINTS_MAKE_AFFINE),	"ec_GFp_simple_points_make_affine"},
-{ERR_FUNC(EC_F_EC_GFP_SIMPLE_POINT_GET_AFFINE_COORDINATES),	"ec_GFp_simple_point_get_affine_coordinates"},
-{ERR_FUNC(EC_F_EC_GFP_SIMPLE_POINT_GET_AFFINE_COORDINATES_GFP),	"EC_GFP_SIMPLE_POINT_GET_AFFINE_COORDINATES_GFP"},
-{ERR_FUNC(EC_F_EC_GFP_SIMPLE_POINT_SET_AFFINE_COORDINATES),	"ec_GFp_simple_point_set_affine_coordinates"},
-{ERR_FUNC(EC_F_EC_GFP_SIMPLE_POINT_SET_AFFINE_COORDINATES_GFP),	"EC_GFP_SIMPLE_POINT_SET_AFFINE_COORDINATES_GFP"},
-{ERR_FUNC(EC_F_EC_GFP_SIMPLE_SET_COMPRESSED_COORDINATES),	"ec_GFp_simple_set_compressed_coordinates"},
-{ERR_FUNC(EC_F_EC_GFP_SIMPLE_SET_COMPRESSED_COORDINATES_GFP),	"EC_GFP_SIMPLE_SET_COMPRESSED_COORDINATES_GFP"},
-{ERR_FUNC(EC_F_EC_GROUP_CHECK),	"EC_GROUP_check"},
-{ERR_FUNC(EC_F_EC_GROUP_CHECK_DISCRIMINANT),	"EC_GROUP_check_discriminant"},
-{ERR_FUNC(EC_F_EC_GROUP_COPY),	"EC_GROUP_copy"},
-{ERR_FUNC(EC_F_EC_GROUP_GET0_GENERATOR),	"EC_GROUP_get0_generator"},
-{ERR_FUNC(EC_F_EC_GROUP_GET_COFACTOR),	"EC_GROUP_get_cofactor"},
-{ERR_FUNC(EC_F_EC_GROUP_GET_CURVE_GF2M),	"EC_GROUP_get_curve_GF2m"},
-{ERR_FUNC(EC_F_EC_GROUP_GET_CURVE_GFP),	"EC_GROUP_get_curve_GFp"},
-{ERR_FUNC(EC_F_EC_GROUP_GET_DEGREE),	"EC_GROUP_get_degree"},
-{ERR_FUNC(EC_F_EC_GROUP_GET_ORDER),	"EC_GROUP_get_order"},
-{ERR_FUNC(EC_F_EC_GROUP_GET_PENTANOMIAL_BASIS),	"EC_GROUP_get_pentanomial_basis"},
-{ERR_FUNC(EC_F_EC_GROUP_GET_TRINOMIAL_BASIS),	"EC_GROUP_get_trinomial_basis"},
-{ERR_FUNC(EC_F_EC_GROUP_NEW),	"EC_GROUP_new"},
-{ERR_FUNC(EC_F_EC_GROUP_NEW_BY_CURVE_NAME),	"EC_GROUP_new_by_curve_name"},
-{ERR_FUNC(EC_F_EC_GROUP_NEW_FROM_DATA),	"EC_GROUP_NEW_FROM_DATA"},
-{ERR_FUNC(EC_F_EC_GROUP_PRECOMPUTE_MULT),	"EC_GROUP_precompute_mult"},
-{ERR_FUNC(EC_F_EC_GROUP_SET_CURVE_GF2M),	"EC_GROUP_set_curve_GF2m"},
-{ERR_FUNC(EC_F_EC_GROUP_SET_CURVE_GFP),	"EC_GROUP_set_curve_GFp"},
-{ERR_FUNC(EC_F_EC_GROUP_SET_EXTRA_DATA),	"EC_GROUP_SET_EXTRA_DATA"},
-{ERR_FUNC(EC_F_EC_GROUP_SET_GENERATOR),	"EC_GROUP_set_generator"},
-{ERR_FUNC(EC_F_EC_KEY_CHECK_KEY),	"EC_KEY_check_key"},
-{ERR_FUNC(EC_F_EC_KEY_COPY),	"EC_KEY_copy"},
-{ERR_FUNC(EC_F_EC_KEY_GENERATE_KEY),	"EC_KEY_generate_key"},
-{ERR_FUNC(EC_F_EC_KEY_NEW),	"EC_KEY_new"},
-{ERR_FUNC(EC_F_EC_KEY_PRINT),	"EC_KEY_print"},
-{ERR_FUNC(EC_F_EC_KEY_PRINT_FP),	"EC_KEY_print_fp"},
-{ERR_FUNC(EC_F_EC_POINTS_MAKE_AFFINE),	"EC_POINTs_make_affine"},
-{ERR_FUNC(EC_F_EC_POINTS_MUL),	"EC_POINTs_mul"},
-{ERR_FUNC(EC_F_EC_POINT_ADD),	"EC_POINT_add"},
-{ERR_FUNC(EC_F_EC_POINT_CMP),	"EC_POINT_cmp"},
-{ERR_FUNC(EC_F_EC_POINT_COPY),	"EC_POINT_copy"},
-{ERR_FUNC(EC_F_EC_POINT_DBL),	"EC_POINT_dbl"},
-{ERR_FUNC(EC_F_EC_POINT_GET_AFFINE_COORDINATES_GF2M),	"EC_POINT_get_affine_coordinates_GF2m"},
-{ERR_FUNC(EC_F_EC_POINT_GET_AFFINE_COORDINATES_GFP),	"EC_POINT_get_affine_coordinates_GFp"},
-{ERR_FUNC(EC_F_EC_POINT_GET_JPROJECTIVE_COORDINATES_GFP),	"EC_POINT_get_Jprojective_coordinates_GFp"},
-{ERR_FUNC(EC_F_EC_POINT_INVERT),	"EC_POINT_invert"},
-{ERR_FUNC(EC_F_EC_POINT_IS_AT_INFINITY),	"EC_POINT_is_at_infinity"},
-{ERR_FUNC(EC_F_EC_POINT_IS_ON_CURVE),	"EC_POINT_is_on_curve"},
-{ERR_FUNC(EC_F_EC_POINT_MAKE_AFFINE),	"EC_POINT_make_affine"},
-{ERR_FUNC(EC_F_EC_POINT_MUL),	"EC_POINT_mul"},
-{ERR_FUNC(EC_F_EC_POINT_NEW),	"EC_POINT_new"},
-{ERR_FUNC(EC_F_EC_POINT_OCT2POINT),	"EC_POINT_oct2point"},
-{ERR_FUNC(EC_F_EC_POINT_POINT2OCT),	"EC_POINT_point2oct"},
-{ERR_FUNC(EC_F_EC_POINT_SET_AFFINE_COORDINATES_GF2M),	"EC_POINT_set_affine_coordinates_GF2m"},
-{ERR_FUNC(EC_F_EC_POINT_SET_AFFINE_COORDINATES_GFP),	"EC_POINT_set_affine_coordinates_GFp"},
-{ERR_FUNC(EC_F_EC_POINT_SET_COMPRESSED_COORDINATES_GF2M),	"EC_POINT_set_compressed_coordinates_GF2m"},
-{ERR_FUNC(EC_F_EC_POINT_SET_COMPRESSED_COORDINATES_GFP),	"EC_POINT_set_compressed_coordinates_GFp"},
-{ERR_FUNC(EC_F_EC_POINT_SET_JPROJECTIVE_COORDINATES_GFP),	"EC_POINT_set_Jprojective_coordinates_GFp"},
-{ERR_FUNC(EC_F_EC_POINT_SET_TO_INFINITY),	"EC_POINT_set_to_infinity"},
-{ERR_FUNC(EC_F_EC_PRE_COMP_DUP),	"EC_PRE_COMP_DUP"},
-{ERR_FUNC(EC_F_EC_WNAF_MUL),	"ec_wNAF_mul"},
-{ERR_FUNC(EC_F_EC_WNAF_PRECOMPUTE_MULT),	"ec_wNAF_precompute_mult"},
-{ERR_FUNC(EC_F_I2D_ECPARAMETERS),	"i2d_ECParameters"},
-{ERR_FUNC(EC_F_I2D_ECPKPARAMETERS),	"i2d_ECPKParameters"},
-{ERR_FUNC(EC_F_I2D_ECPRIVATEKEY),	"i2d_ECPrivateKey"},
-{ERR_FUNC(EC_F_I2O_ECPUBLICKEY),	"i2o_ECPublicKey"},
-{ERR_FUNC(EC_F_O2I_ECPUBLICKEY),	"o2i_ECPublicKey"},
-{0,NULL}
-	};
-
-static ERR_STRING_DATA EC_str_reasons[]=
-	{
-{ERR_REASON(EC_R_ASN1_ERROR)             ,"asn1 error"},
-{ERR_REASON(EC_R_ASN1_UNKNOWN_FIELD)     ,"asn1 unknown field"},
-{ERR_REASON(EC_R_BUFFER_TOO_SMALL)       ,"buffer too small"},
-{ERR_REASON(EC_R_D2I_ECPKPARAMETERS_FAILURE),"d2i ecpkparameters failure"},
-{ERR_REASON(EC_R_DISCRIMINANT_IS_ZERO)   ,"discriminant is zero"},
-{ERR_REASON(EC_R_EC_GROUP_NEW_BY_NAME_FAILURE),"ec group new by name failure"},
-{ERR_REASON(EC_R_FIELD_TOO_LARGE)        ,"field too large"},
-{ERR_REASON(EC_R_GROUP2PKPARAMETERS_FAILURE),"group2pkparameters failure"},
-{ERR_REASON(EC_R_I2D_ECPKPARAMETERS_FAILURE),"i2d ecpkparameters failure"},
-{ERR_REASON(EC_R_INCOMPATIBLE_OBJECTS)   ,"incompatible objects"},
-{ERR_REASON(EC_R_INVALID_ARGUMENT)       ,"invalid argument"},
-{ERR_REASON(EC_R_INVALID_COMPRESSED_POINT),"invalid compressed point"},
-{ERR_REASON(EC_R_INVALID_COMPRESSION_BIT),"invalid compression bit"},
-{ERR_REASON(EC_R_INVALID_ENCODING)       ,"invalid encoding"},
-{ERR_REASON(EC_R_INVALID_FIELD)          ,"invalid field"},
-{ERR_REASON(EC_R_INVALID_FORM)           ,"invalid form"},
-{ERR_REASON(EC_R_INVALID_GROUP_ORDER)    ,"invalid group order"},
-{ERR_REASON(EC_R_INVALID_PENTANOMIAL_BASIS),"invalid pentanomial basis"},
-{ERR_REASON(EC_R_INVALID_PRIVATE_KEY)    ,"invalid private key"},
-{ERR_REASON(EC_R_INVALID_TRINOMIAL_BASIS),"invalid trinomial basis"},
-{ERR_REASON(EC_R_MISSING_PARAMETERS)     ,"missing parameters"},
-{ERR_REASON(EC_R_MISSING_PRIVATE_KEY)    ,"missing private key"},
-{ERR_REASON(EC_R_NOT_A_NIST_PRIME)       ,"not a NIST prime"},
-{ERR_REASON(EC_R_NOT_A_SUPPORTED_NIST_PRIME),"not a supported NIST prime"},
-{ERR_REASON(EC_R_NOT_IMPLEMENTED)        ,"not implemented"},
-{ERR_REASON(EC_R_NOT_INITIALIZED)        ,"not initialized"},
-{ERR_REASON(EC_R_NO_FIELD_MOD)           ,"no field mod"},
-{ERR_REASON(EC_R_PASSED_NULL_PARAMETER)  ,"passed null parameter"},
-{ERR_REASON(EC_R_PKPARAMETERS2GROUP_FAILURE),"pkparameters2group failure"},
-{ERR_REASON(EC_R_POINT_AT_INFINITY)      ,"point at infinity"},
-{ERR_REASON(EC_R_POINT_IS_NOT_ON_CURVE)  ,"point is not on curve"},
-{ERR_REASON(EC_R_SLOT_FULL)              ,"slot full"},
-{ERR_REASON(EC_R_UNDEFINED_GENERATOR)    ,"undefined generator"},
-{ERR_REASON(EC_R_UNDEFINED_ORDER)        ,"undefined order"},
-{ERR_REASON(EC_R_UNKNOWN_GROUP)          ,"unknown group"},
-{ERR_REASON(EC_R_UNKNOWN_ORDER)          ,"unknown order"},
-{ERR_REASON(EC_R_UNSUPPORTED_FIELD)      ,"unsupported field"},
-{ERR_REASON(EC_R_WRONG_ORDER)            ,"wrong order"},
-{0,NULL}
-	};
-
-#endif
-
-void ERR_load_EC_strings(void)
-	{
-#ifndef OPENSSL_NO_ERR
-
-	if (ERR_func_error_string(EC_str_functs[0].error) == NULL)
-		{
-		ERR_load_strings(0,EC_str_functs);
-		ERR_load_strings(0,EC_str_reasons);
-		}
-#endif
-	}
diff --git a/crypto/openssl/crypto/ec/ec_key.c b/crypto/openssl/crypto/ec/ec_key.c
deleted file mode 100644
index 3d6c900b95a7..000000000000
--- a/crypto/openssl/crypto/ec/ec_key.c
+++ /dev/null
@@ -1,465 +0,0 @@
-/* crypto/ec/ec_key.c */
-/*
- * Written by Nils Larsch for the OpenSSL project.
- */
-/* ====================================================================
- * Copyright (c) 1998-2005 The OpenSSL Project.  All rights reserved.
- *
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions
- * are met:
- *
- * 1. Redistributions of source code must retain the above copyright
- *    notice, this list of conditions and the following disclaimer. 
- *
- * 2. Redistributions in binary form must reproduce the above copyright
- *    notice, this list of conditions and the following disclaimer in
- *    the documentation and/or other materials provided with the
- *    distribution.
- *
- * 3. All advertising materials mentioning features or use of this
- *    software must display the following acknowledgment:
- *    "This product includes software developed by the OpenSSL Project
- *    for use in the OpenSSL Toolkit. (http://www.openssl.org/)"
- *
- * 4. The names "OpenSSL Toolkit" and "OpenSSL Project" must not be used to
- *    endorse or promote products derived from this software without
- *    prior written permission. For written permission, please contact
- *    openssl-core@openssl.org.
- *
- * 5. Products derived from this software may not be called "OpenSSL"
- *    nor may "OpenSSL" appear in their names without prior written
- *    permission of the OpenSSL Project.
- *
- * 6. Redistributions of any form whatsoever must retain the following
- *    acknowledgment:
- *    "This product includes software developed by the OpenSSL Project
- *    for use in the OpenSSL Toolkit (http://www.openssl.org/)"
- *
- * THIS SOFTWARE IS PROVIDED BY THE OpenSSL PROJECT ``AS IS'' AND ANY
- * EXPRESSED OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
- * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR
- * PURPOSE ARE DISCLAIMED.  IN NO EVENT SHALL THE OpenSSL PROJECT OR
- * ITS CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
- * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
- * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
- * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
- * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
- * STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
- * ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED
- * OF THE POSSIBILITY OF SUCH DAMAGE.
- * ====================================================================
- *
- * This product includes cryptographic software written by Eric Young
- * (eay@cryptsoft.com).  This product includes software written by Tim
- * Hudson (tjh@cryptsoft.com).
- *
- */
-/* ====================================================================
- * Copyright 2002 Sun Microsystems, Inc. ALL RIGHTS RESERVED.
- * Portions originally developed by SUN MICROSYSTEMS, INC., and 
- * contributed to the OpenSSL project.
- */
-
-#include <string.h>
-#include "ec_lcl.h"
-#include <openssl/err.h>
-#include <string.h>
-
-EC_KEY *EC_KEY_new(void)
-	{
-	EC_KEY *ret;
-
-	ret=(EC_KEY *)OPENSSL_malloc(sizeof(EC_KEY));
-	if (ret == NULL)
-		{
-		ECerr(EC_F_EC_KEY_NEW, ERR_R_MALLOC_FAILURE);
-		return(NULL);
-		}
-
-	ret->version = 1;	
-	ret->group   = NULL;
-	ret->pub_key = NULL;
-	ret->priv_key= NULL;
-	ret->enc_flag= 0; 
-	ret->conv_form = POINT_CONVERSION_UNCOMPRESSED;
-	ret->references= 1;
-	ret->method_data = NULL;
-	return(ret);
-	}
-
-EC_KEY *EC_KEY_new_by_curve_name(int nid)
-	{
-	EC_KEY *ret = EC_KEY_new();
-	if (ret == NULL)
-		return NULL;
-	ret->group = EC_GROUP_new_by_curve_name(nid);
-	if (ret->group == NULL)
-		{
-		EC_KEY_free(ret);
-		return NULL;
-		}
-	return ret;
-	}
-
-void EC_KEY_free(EC_KEY *r)
-	{
-	int i;
-
-	if (r == NULL) return;
-
-	i=CRYPTO_add(&r->references,-1,CRYPTO_LOCK_EC);
-#ifdef REF_PRINT
-	REF_PRINT("EC_KEY",r);
-#endif
-	if (i > 0) return;
-#ifdef REF_CHECK
-	if (i < 0)
-		{
-		fprintf(stderr,"EC_KEY_free, bad reference count\n");
-		abort();
-		}
-#endif
-
-	if (r->group    != NULL) 
-		EC_GROUP_free(r->group);
-	if (r->pub_key  != NULL)
-		EC_POINT_free(r->pub_key);
-	if (r->priv_key != NULL)
-		BN_clear_free(r->priv_key);
-
-	EC_EX_DATA_free_all_data(&r->method_data);
-
-	OPENSSL_cleanse((void *)r, sizeof(EC_KEY));
-
-	OPENSSL_free(r);
-	}
-
-EC_KEY *EC_KEY_copy(EC_KEY *dest, const EC_KEY *src)
-	{
-	EC_EXTRA_DATA *d;
-
-	if (dest == NULL || src == NULL)
-		{
-		ECerr(EC_F_EC_KEY_COPY, ERR_R_PASSED_NULL_PARAMETER);
-		return NULL;
-		}
-	/* copy the parameters */
-	if (src->group)
-		{
-		const EC_METHOD *meth = EC_GROUP_method_of(src->group);
-		/* clear the old group */
-		if (dest->group)
-			EC_GROUP_free(dest->group);
-		dest->group = EC_GROUP_new(meth);
-		if (dest->group == NULL)
-			return NULL;
-		if (!EC_GROUP_copy(dest->group, src->group))
-			return NULL;
-		}
-	/*  copy the public key */
-	if (src->pub_key && src->group)
-		{
-		if (dest->pub_key)
-			EC_POINT_free(dest->pub_key);
-		dest->pub_key = EC_POINT_new(src->group);
-		if (dest->pub_key == NULL)
-			return NULL;
-		if (!EC_POINT_copy(dest->pub_key, src->pub_key))
-			return NULL;
-		}
-	/* copy the private key */
-	if (src->priv_key)
-		{
-		if (dest->priv_key == NULL)
-			{
-			dest->priv_key = BN_new();
-			if (dest->priv_key == NULL)
-				return NULL;
-			}
-		if (!BN_copy(dest->priv_key, src->priv_key))
-			return NULL;
-		}
-	/* copy method/extra data */
-	EC_EX_DATA_free_all_data(&dest->method_data);
-
-	for (d = src->method_data; d != NULL; d = d->next)
-		{
-		void *t = d->dup_func(d->data);
-		
-		if (t == NULL)
-			return 0;
-		if (!EC_EX_DATA_set_data(&dest->method_data, t, d->dup_func, d->free_func, d->clear_free_func))
-			return 0;
-		}
-
-	/* copy the rest */
-	dest->enc_flag  = src->enc_flag;
-	dest->conv_form = src->conv_form;
-	dest->version   = src->version;
-
-	return dest;
-	}
-
-EC_KEY *EC_KEY_dup(const EC_KEY *ec_key)
-	{
-	EC_KEY *ret = EC_KEY_new();
-	if (ret == NULL)
-		return NULL;
-	if (EC_KEY_copy(ret, ec_key) == NULL)
-		{
-		EC_KEY_free(ret);
-		return NULL;
-		}
-	return ret;
-	}
-
-int EC_KEY_up_ref(EC_KEY *r)
-	{
-	int i = CRYPTO_add(&r->references, 1, CRYPTO_LOCK_EC);
-#ifdef REF_PRINT
-	REF_PRINT("EC_KEY",r);
-#endif
-#ifdef REF_CHECK
-	if (i < 2)
-		{
-		fprintf(stderr, "EC_KEY_up, bad reference count\n");
-		abort();
-		}
-#endif
-	return ((i > 1) ? 1 : 0);
-	}
-
-int EC_KEY_generate_key(EC_KEY *eckey)
-	{	
-	int	ok = 0;
-	BN_CTX	*ctx = NULL;
-	BIGNUM	*priv_key = NULL, *order = NULL;
-	EC_POINT *pub_key = NULL;
-
-	if (!eckey || !eckey->group)
-		{
-		ECerr(EC_F_EC_KEY_GENERATE_KEY, ERR_R_PASSED_NULL_PARAMETER);
-		return 0;
-		}
-
-	if ((order = BN_new()) == NULL) goto err;
-	if ((ctx = BN_CTX_new()) == NULL) goto err;
-
-	if (eckey->priv_key == NULL)
-		{
-		priv_key = BN_new();
-		if (priv_key == NULL)
-			goto err;
-		}
-	else
-		priv_key = eckey->priv_key;
-
-	if (!EC_GROUP_get_order(eckey->group, order, ctx))
-		goto err;
-
-	do
-		if (!BN_rand_range(priv_key, order))
-			goto err;
-	while (BN_is_zero(priv_key));
-
-	if (eckey->pub_key == NULL)
-		{
-		pub_key = EC_POINT_new(eckey->group);
-		if (pub_key == NULL)
-			goto err;
-		}
-	else
-		pub_key = eckey->pub_key;
-
-	if (!EC_POINT_mul(eckey->group, pub_key, priv_key, NULL, NULL, ctx))
-		goto err;
-
-	eckey->priv_key = priv_key;
-	eckey->pub_key  = pub_key;
-
-	ok=1;
-
-err:	
-	if (order)
-		BN_free(order);
-	if (pub_key  != NULL && eckey->pub_key  == NULL)
-		EC_POINT_free(pub_key);
-	if (priv_key != NULL && eckey->priv_key == NULL)
-		BN_free(priv_key);
-	if (ctx != NULL)
-		BN_CTX_free(ctx);
-	return(ok);
-	}
-
-int EC_KEY_check_key(const EC_KEY *eckey)
-	{
-	int	ok   = 0;
-	BN_CTX	*ctx = NULL;
-	BIGNUM	*order  = NULL;
-	EC_POINT *point = NULL;
-
-	if (!eckey || !eckey->group || !eckey->pub_key)
-		{
-		ECerr(EC_F_EC_KEY_CHECK_KEY, ERR_R_PASSED_NULL_PARAMETER);
-		return 0;
-		}
-	
-	if ((ctx = BN_CTX_new()) == NULL)
-		goto err;
-	if ((order = BN_new()) == NULL)
-		goto err;
-	if ((point = EC_POINT_new(eckey->group)) == NULL)
-		goto err;
-
-	/* testing whether the pub_key is on the elliptic curve */
-	if (!EC_POINT_is_on_curve(eckey->group, eckey->pub_key, ctx))
-		{
-		ECerr(EC_F_EC_KEY_CHECK_KEY, EC_R_POINT_IS_NOT_ON_CURVE);
-		goto err;
-		}
-	/* testing whether pub_key * order is the point at infinity */
-	if (!EC_GROUP_get_order(eckey->group, order, ctx))
-		{
-		ECerr(EC_F_EC_KEY_CHECK_KEY, EC_R_INVALID_GROUP_ORDER);
-		goto err;
-		}
-	if (!EC_POINT_copy(point, eckey->pub_key))
-		{
-		ECerr(EC_F_EC_KEY_CHECK_KEY, ERR_R_EC_LIB);
-		goto err;
-		}
-	if (!EC_POINT_mul(eckey->group, point, order, NULL, NULL, ctx))
-		{
-		ECerr(EC_F_EC_KEY_CHECK_KEY, ERR_R_EC_LIB);
-		goto err;
-		}
-	if (!EC_POINT_is_at_infinity(eckey->group, point))
-		{
-		ECerr(EC_F_EC_KEY_CHECK_KEY, EC_R_WRONG_ORDER);
-		goto err;
-		}
-	/* in case the priv_key is present : 
-	 * check if generator * priv_key == pub_key 
-	 */
-	if (eckey->priv_key)
-		{
-		if (BN_cmp(eckey->priv_key, order) >= 0)
-			{
-			ECerr(EC_F_EC_KEY_CHECK_KEY, EC_R_WRONG_ORDER);
-			goto err;
-			}
-		if (!EC_POINT_mul(eckey->group, point, eckey->priv_key,
-			NULL, NULL, ctx))
-			{
-			ECerr(EC_F_EC_KEY_CHECK_KEY, ERR_R_EC_LIB);
-			goto err;
-			}
-		if (EC_POINT_cmp(eckey->group, point, eckey->pub_key, 
-			ctx) != 0)
-			{
-			ECerr(EC_F_EC_KEY_CHECK_KEY, EC_R_INVALID_PRIVATE_KEY);
-			goto err;
-			}
-		}
-	ok = 1;
-err:
-	if (ctx   != NULL)
-		BN_CTX_free(ctx);
-	if (order != NULL)
-		BN_free(order);
-	if (point != NULL)
-		EC_POINT_free(point);
-	return(ok);
-	}
-
-const EC_GROUP *EC_KEY_get0_group(const EC_KEY *key)
-	{
-	return key->group;
-	}
-
-int EC_KEY_set_group(EC_KEY *key, const EC_GROUP *group)
-	{
-	if (key->group != NULL)
-		EC_GROUP_free(key->group);
-	key->group = EC_GROUP_dup(group);
-	return (key->group == NULL) ? 0 : 1;
-	}
-
-const BIGNUM *EC_KEY_get0_private_key(const EC_KEY *key)
-	{
-	return key->priv_key;
-	}
-
-int EC_KEY_set_private_key(EC_KEY *key, const BIGNUM *priv_key)
-	{
-	if (key->priv_key)
-		BN_clear_free(key->priv_key);
-	key->priv_key = BN_dup(priv_key);
-	return (key->priv_key == NULL) ? 0 : 1;
-	}
-
-const EC_POINT *EC_KEY_get0_public_key(const EC_KEY *key)
-	{
-	return key->pub_key;
-	}
-
-int EC_KEY_set_public_key(EC_KEY *key, const EC_POINT *pub_key)
-	{
-	if (key->pub_key != NULL)
-		EC_POINT_free(key->pub_key);
-	key->pub_key = EC_POINT_dup(pub_key, key->group);
-	return (key->pub_key == NULL) ? 0 : 1;
-	}
-
-unsigned int EC_KEY_get_enc_flags(const EC_KEY *key)
-	{
-	return key->enc_flag;
-	}
-
-void EC_KEY_set_enc_flags(EC_KEY *key, unsigned int flags)
-	{
-	key->enc_flag = flags;
-	}
-
-point_conversion_form_t EC_KEY_get_conv_form(const EC_KEY *key)
-	{
-	return key->conv_form;
-	}
-
-void EC_KEY_set_conv_form(EC_KEY *key, point_conversion_form_t cform)
-	{
-	key->conv_form = cform;
-	if (key->group != NULL)
-		EC_GROUP_set_point_conversion_form(key->group, cform);
-	}
-
-void *EC_KEY_get_key_method_data(EC_KEY *key,
-	void *(*dup_func)(void *), void (*free_func)(void *), void (*clear_free_func)(void *))
-	{
-	return EC_EX_DATA_get_data(key->method_data, dup_func, free_func, clear_free_func);
-	}
-
-void EC_KEY_insert_key_method_data(EC_KEY *key, void *data,
-	void *(*dup_func)(void *), void (*free_func)(void *), void (*clear_free_func)(void *))
-	{
-	EC_EXTRA_DATA *ex_data;
-	CRYPTO_w_lock(CRYPTO_LOCK_EC);
-	ex_data = EC_EX_DATA_get_data(key->method_data, dup_func, free_func, clear_free_func);
-	if (ex_data == NULL)
-		EC_EX_DATA_set_data(&key->method_data, data, dup_func, free_func, clear_free_func);
-	CRYPTO_w_unlock(CRYPTO_LOCK_EC);
-	}
-
-void EC_KEY_set_asn1_flag(EC_KEY *key, int flag)
-	{
-	if (key->group != NULL)
-		EC_GROUP_set_asn1_flag(key->group, flag);
-	}
-
-int EC_KEY_precompute_mult(EC_KEY *key, BN_CTX *ctx)
-	{
-	if (key->group == NULL)
-		return 0;
-	return EC_GROUP_precompute_mult(key->group, ctx);
-	}
diff --git a/crypto/openssl/crypto/ec/ec_lcl.h b/crypto/openssl/crypto/ec/ec_lcl.h
deleted file mode 100644
index fdd7aa275563..000000000000
--- a/crypto/openssl/crypto/ec/ec_lcl.h
+++ /dev/null
@@ -1,390 +0,0 @@
-/* crypto/ec/ec_lcl.h */
-/*
- * Originally written by Bodo Moeller for the OpenSSL project.
- */
-/* ====================================================================
- * Copyright (c) 1998-2003 The OpenSSL Project.  All rights reserved.
- *
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions
- * are met:
- *
- * 1. Redistributions of source code must retain the above copyright
- *    notice, this list of conditions and the following disclaimer. 
- *
- * 2. Redistributions in binary form must reproduce the above copyright
- *    notice, this list of conditions and the following disclaimer in
- *    the documentation and/or other materials provided with the
- *    distribution.
- *
- * 3. All advertising materials mentioning features or use of this
- *    software must display the following acknowledgment:
- *    "This product includes software developed by the OpenSSL Project
- *    for use in the OpenSSL Toolkit. (http://www.openssl.org/)"
- *
- * 4. The names "OpenSSL Toolkit" and "OpenSSL Project" must not be used to
- *    endorse or promote products derived from this software without
- *    prior written permission. For written permission, please contact
- *    openssl-core@openssl.org.
- *
- * 5. Products derived from this software may not be called "OpenSSL"
- *    nor may "OpenSSL" appear in their names without prior written
- *    permission of the OpenSSL Project.
- *
- * 6. Redistributions of any form whatsoever must retain the following
- *    acknowledgment:
- *    "This product includes software developed by the OpenSSL Project
- *    for use in the OpenSSL Toolkit (http://www.openssl.org/)"
- *
- * THIS SOFTWARE IS PROVIDED BY THE OpenSSL PROJECT ``AS IS'' AND ANY
- * EXPRESSED OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
- * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR
- * PURPOSE ARE DISCLAIMED.  IN NO EVENT SHALL THE OpenSSL PROJECT OR
- * ITS CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
- * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
- * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
- * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
- * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
- * STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
- * ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED
- * OF THE POSSIBILITY OF SUCH DAMAGE.
- * ====================================================================
- *
- * This product includes cryptographic software written by Eric Young
- * (eay@cryptsoft.com).  This product includes software written by Tim
- * Hudson (tjh@cryptsoft.com).
- *
- */
-/* ====================================================================
- * Copyright 2002 Sun Microsystems, Inc. ALL RIGHTS RESERVED.
- *
- * Portions of the attached software ("Contribution") are developed by 
- * SUN MICROSYSTEMS, INC., and are contributed to the OpenSSL project.
- *
- * The Contribution is licensed pursuant to the OpenSSL open source
- * license provided above.
- *
- * The elliptic curve binary polynomial software is originally written by 
- * Sheueling Chang Shantz and Douglas Stebila of Sun Microsystems Laboratories.
- *
- */
-
-
-#include <stdlib.h>
-
-#include <openssl/obj_mac.h>
-#include <openssl/ec.h>
-#include <openssl/bn.h>
-
-#if defined(__SUNPRO_C)
-# if __SUNPRO_C >= 0x520
-# pragma error_messages (off,E_ARRAY_OF_INCOMPLETE_NONAME,E_ARRAY_OF_INCOMPLETE)
-# endif
-#endif
-
-/* Structure details are not part of the exported interface,
- * so all this may change in future versions. */
-
-struct ec_method_st {
-	/* used by EC_METHOD_get_field_type: */
-	int field_type; /* a NID */
-
-	/* used by EC_GROUP_new, EC_GROUP_free, EC_GROUP_clear_free, EC_GROUP_copy: */
-	int (*group_init)(EC_GROUP *);
-	void (*group_finish)(EC_GROUP *);
-	void (*group_clear_finish)(EC_GROUP *);
-	int (*group_copy)(EC_GROUP *, const EC_GROUP *);
-
-	/* used by EC_GROUP_set_curve_GFp, EC_GROUP_get_curve_GFp, */
-	/* EC_GROUP_set_curve_GF2m, and EC_GROUP_get_curve_GF2m: */
-	int (*group_set_curve)(EC_GROUP *, const BIGNUM *p, const BIGNUM *a, const BIGNUM *b, BN_CTX *);
-	int (*group_get_curve)(const EC_GROUP *, BIGNUM *p, BIGNUM *a, BIGNUM *b, BN_CTX *);
-
-	/* used by EC_GROUP_get_degree: */
-	int (*group_get_degree)(const EC_GROUP *);
-
-	/* used by EC_GROUP_check: */
-	int (*group_check_discriminant)(const EC_GROUP *, BN_CTX *);
-
-	/* used by EC_POINT_new, EC_POINT_free, EC_POINT_clear_free, EC_POINT_copy: */
-	int (*point_init)(EC_POINT *);
-	void (*point_finish)(EC_POINT *);
-	void (*point_clear_finish)(EC_POINT *);
-	int (*point_copy)(EC_POINT *, const EC_POINT *);
-
-	/* used by EC_POINT_set_to_infinity,
-	 * EC_POINT_set_Jprojective_coordinates_GFp,
-	 * EC_POINT_get_Jprojective_coordinates_GFp,
-	 * EC_POINT_set_affine_coordinates_GFp,     ..._GF2m,
-	 * EC_POINT_get_affine_coordinates_GFp,     ..._GF2m,
-	 * EC_POINT_set_compressed_coordinates_GFp, ..._GF2m:
-	 */
-	int (*point_set_to_infinity)(const EC_GROUP *, EC_POINT *);
-	int (*point_set_Jprojective_coordinates_GFp)(const EC_GROUP *, EC_POINT *,
-		const BIGNUM *x, const BIGNUM *y, const BIGNUM *z, BN_CTX *);
-	int (*point_get_Jprojective_coordinates_GFp)(const EC_GROUP *, const EC_POINT *,
-		BIGNUM *x, BIGNUM *y, BIGNUM *z, BN_CTX *);
-	int (*point_set_affine_coordinates)(const EC_GROUP *, EC_POINT *,
-		const BIGNUM *x, const BIGNUM *y, BN_CTX *);
-	int (*point_get_affine_coordinates)(const EC_GROUP *, const EC_POINT *,
-		BIGNUM *x, BIGNUM *y, BN_CTX *);
-	int (*point_set_compressed_coordinates)(const EC_GROUP *, EC_POINT *,
-		const BIGNUM *x, int y_bit, BN_CTX *);
-
-	/* used by EC_POINT_point2oct, EC_POINT_oct2point: */
-	size_t (*point2oct)(const EC_GROUP *, const EC_POINT *, point_conversion_form_t form,
-	        unsigned char *buf, size_t len, BN_CTX *);
-	int (*oct2point)(const EC_GROUP *, EC_POINT *,
-	        const unsigned char *buf, size_t len, BN_CTX *);
-
-	/* used by EC_POINT_add, EC_POINT_dbl, ECP_POINT_invert: */
-	int (*add)(const EC_GROUP *, EC_POINT *r, const EC_POINT *a, const EC_POINT *b, BN_CTX *);
-	int (*dbl)(const EC_GROUP *, EC_POINT *r, const EC_POINT *a, BN_CTX *);
-	int (*invert)(const EC_GROUP *, EC_POINT *, BN_CTX *);
-
-	/* used by EC_POINT_is_at_infinity, EC_POINT_is_on_curve, EC_POINT_cmp: */
-	int (*is_at_infinity)(const EC_GROUP *, const EC_POINT *);
-	int (*is_on_curve)(const EC_GROUP *, const EC_POINT *, BN_CTX *);
-	int (*point_cmp)(const EC_GROUP *, const EC_POINT *a, const EC_POINT *b, BN_CTX *);
-
-	/* used by EC_POINT_make_affine, EC_POINTs_make_affine: */
-	int (*make_affine)(const EC_GROUP *, EC_POINT *, BN_CTX *);
-	int (*points_make_affine)(const EC_GROUP *, size_t num, EC_POINT *[], BN_CTX *);
-
-	/* used by EC_POINTs_mul, EC_POINT_mul, EC_POINT_precompute_mult, EC_POINT_have_precompute_mult
-	 * (default implementations are used if the 'mul' pointer is 0): */
-	int (*mul)(const EC_GROUP *group, EC_POINT *r, const BIGNUM *scalar,
-		size_t num, const EC_POINT *points[], const BIGNUM *scalars[], BN_CTX *);
-	int (*precompute_mult)(EC_GROUP *group, BN_CTX *);
-	int (*have_precompute_mult)(const EC_GROUP *group);
-
-
-	/* internal functions */
-
-	/* 'field_mul', 'field_sqr', and 'field_div' can be used by 'add' and 'dbl' so that
-	 * the same implementations of point operations can be used with different
-	 * optimized implementations of expensive field operations: */
-	int (*field_mul)(const EC_GROUP *, BIGNUM *r, const BIGNUM *a, const BIGNUM *b, BN_CTX *);
-	int (*field_sqr)(const EC_GROUP *, BIGNUM *r, const BIGNUM *a, BN_CTX *);
-	int (*field_div)(const EC_GROUP *, BIGNUM *r, const BIGNUM *a, const BIGNUM *b, BN_CTX *);
-
-	int (*field_encode)(const EC_GROUP *, BIGNUM *r, const BIGNUM *a, BN_CTX *); /* e.g. to Montgomery */
-	int (*field_decode)(const EC_GROUP *, BIGNUM *r, const BIGNUM *a, BN_CTX *); /* e.g. from Montgomery */
-	int (*field_set_to_one)(const EC_GROUP *, BIGNUM *r, BN_CTX *);
-} /* EC_METHOD */;
-
-typedef struct ec_extra_data_st {
-	struct ec_extra_data_st *next;
-	void *data;
-	void *(*dup_func)(void *);
-	void (*free_func)(void *);
-	void (*clear_free_func)(void *);
-} EC_EXTRA_DATA; /* used in EC_GROUP */
-
-struct ec_group_st {
-	const EC_METHOD *meth;
-
-	EC_POINT *generator; /* optional */
-	BIGNUM order, cofactor;
-
-	int curve_name;/* optional NID for named curve */
-	int asn1_flag; /* flag to control the asn1 encoding */
-	point_conversion_form_t asn1_form;
-
-	unsigned char *seed; /* optional seed for parameters (appears in ASN1) */
-	size_t seed_len;
-
-	EC_EXTRA_DATA *extra_data; /* linked list */
-
-	/* The following members are handled by the method functions,
-	 * even if they appear generic */
-	
-	BIGNUM field; /* Field specification.
-	               * For curves over GF(p), this is the modulus;
-	               * for curves over GF(2^m), this is the 
-	               * irreducible polynomial defining the field.
-	               */
-
-	unsigned int poly[5]; /* Field specification for curves over GF(2^m).
-	                       * The irreducible f(t) is then of the form:
-	                       *     t^poly[0] + t^poly[1] + ... + t^poly[k]
-	                       * where m = poly[0] > poly[1] > ... > poly[k] = 0.
-	                       */
-
-	BIGNUM a, b; /* Curve coefficients.
-	              * (Here the assumption is that BIGNUMs can be used
-	              * or abused for all kinds of fields, not just GF(p).)
-	              * For characteristic  > 3,  the curve is defined
-	              * by a Weierstrass equation of the form
-	              *     y^2 = x^3 + a*x + b.
-	              * For characteristic  2,  the curve is defined by
-	              * an equation of the form
-	              *     y^2 + x*y = x^3 + a*x^2 + b.
-	              */
-
-	int a_is_minus3; /* enable optimized point arithmetics for special case */
-
-	void *field_data1; /* method-specific (e.g., Montgomery structure) */
-	void *field_data2; /* method-specific */
-	int (*field_mod_func)(BIGNUM *, const BIGNUM *, const BIGNUM *,	BN_CTX *); /* method-specific */
-} /* EC_GROUP */;
-
-struct ec_key_st {
-	int version;
-
-	EC_GROUP *group;
-
-	EC_POINT *pub_key;
-	BIGNUM	 *priv_key;
-
-	unsigned int enc_flag;
-	point_conversion_form_t conv_form;
-
-	int 	references;
-
-	EC_EXTRA_DATA *method_data;
-} /* EC_KEY */;
-
-/* Basically a 'mixin' for extra data, but available for EC_GROUPs/EC_KEYs only
- * (with visibility limited to 'package' level for now).
- * We use the function pointers as index for retrieval; this obviates
- * global ex_data-style index tables.
- */
-int EC_EX_DATA_set_data(EC_EXTRA_DATA **, void *data,
-	void *(*dup_func)(void *), void (*free_func)(void *), void (*clear_free_func)(void *));
-void *EC_EX_DATA_get_data(const EC_EXTRA_DATA *,
-	void *(*dup_func)(void *), void (*free_func)(void *), void (*clear_free_func)(void *));
-void EC_EX_DATA_free_data(EC_EXTRA_DATA **,
-	void *(*dup_func)(void *), void (*free_func)(void *), void (*clear_free_func)(void *));
-void EC_EX_DATA_clear_free_data(EC_EXTRA_DATA **,
-	void *(*dup_func)(void *), void (*free_func)(void *), void (*clear_free_func)(void *));
-void EC_EX_DATA_free_all_data(EC_EXTRA_DATA **);
-void EC_EX_DATA_clear_free_all_data(EC_EXTRA_DATA **);
-
-
-
-struct ec_point_st {
-	const EC_METHOD *meth;
-
-	/* All members except 'meth' are handled by the method functions,
-	 * even if they appear generic */
-
-	BIGNUM X;
-	BIGNUM Y;
-	BIGNUM Z; /* Jacobian projective coordinates:
-	           * (X, Y, Z)  represents  (X/Z^2, Y/Z^3)  if  Z != 0 */
-	int Z_is_one; /* enable optimized point arithmetics for special case */
-} /* EC_POINT */;
-
-
-
-/* method functions in ec_mult.c
- * (ec_lib.c uses these as defaults if group->method->mul is 0) */
-int ec_wNAF_mul(const EC_GROUP *group, EC_POINT *r, const BIGNUM *scalar,
-	size_t num, const EC_POINT *points[], const BIGNUM *scalars[], BN_CTX *);
-int ec_wNAF_precompute_mult(EC_GROUP *group, BN_CTX *);
-int ec_wNAF_have_precompute_mult(const EC_GROUP *group);
-
-
-/* method functions in ecp_smpl.c */
-int ec_GFp_simple_group_init(EC_GROUP *);
-void ec_GFp_simple_group_finish(EC_GROUP *);
-void ec_GFp_simple_group_clear_finish(EC_GROUP *);
-int ec_GFp_simple_group_copy(EC_GROUP *, const EC_GROUP *);
-int ec_GFp_simple_group_set_curve(EC_GROUP *, const BIGNUM *p, const BIGNUM *a, const BIGNUM *b, BN_CTX *);
-int ec_GFp_simple_group_get_curve(const EC_GROUP *, BIGNUM *p, BIGNUM *a, BIGNUM *b, BN_CTX *);
-int ec_GFp_simple_group_get_degree(const EC_GROUP *);
-int ec_GFp_simple_group_check_discriminant(const EC_GROUP *, BN_CTX *);
-int ec_GFp_simple_point_init(EC_POINT *);
-void ec_GFp_simple_point_finish(EC_POINT *);
-void ec_GFp_simple_point_clear_finish(EC_POINT *);
-int ec_GFp_simple_point_copy(EC_POINT *, const EC_POINT *);
-int ec_GFp_simple_point_set_to_infinity(const EC_GROUP *, EC_POINT *);
-int ec_GFp_simple_set_Jprojective_coordinates_GFp(const EC_GROUP *, EC_POINT *,
-	const BIGNUM *x, const BIGNUM *y, const BIGNUM *z, BN_CTX *);
-int ec_GFp_simple_get_Jprojective_coordinates_GFp(const EC_GROUP *, const EC_POINT *,
-	BIGNUM *x, BIGNUM *y, BIGNUM *z, BN_CTX *);
-int ec_GFp_simple_point_set_affine_coordinates(const EC_GROUP *, EC_POINT *,
-	const BIGNUM *x, const BIGNUM *y, BN_CTX *);
-int ec_GFp_simple_point_get_affine_coordinates(const EC_GROUP *, const EC_POINT *,
-	BIGNUM *x, BIGNUM *y, BN_CTX *);
-int ec_GFp_simple_set_compressed_coordinates(const EC_GROUP *, EC_POINT *,
-	const BIGNUM *x, int y_bit, BN_CTX *);
-size_t ec_GFp_simple_point2oct(const EC_GROUP *, const EC_POINT *, point_conversion_form_t form,
-	unsigned char *buf, size_t len, BN_CTX *);
-int ec_GFp_simple_oct2point(const EC_GROUP *, EC_POINT *,
-	const unsigned char *buf, size_t len, BN_CTX *);
-int ec_GFp_simple_add(const EC_GROUP *, EC_POINT *r, const EC_POINT *a, const EC_POINT *b, BN_CTX *);
-int ec_GFp_simple_dbl(const EC_GROUP *, EC_POINT *r, const EC_POINT *a, BN_CTX *);
-int ec_GFp_simple_invert(const EC_GROUP *, EC_POINT *, BN_CTX *);
-int ec_GFp_simple_is_at_infinity(const EC_GROUP *, const EC_POINT *);
-int ec_GFp_simple_is_on_curve(const EC_GROUP *, const EC_POINT *, BN_CTX *);
-int ec_GFp_simple_cmp(const EC_GROUP *, const EC_POINT *a, const EC_POINT *b, BN_CTX *);
-int ec_GFp_simple_make_affine(const EC_GROUP *, EC_POINT *, BN_CTX *);
-int ec_GFp_simple_points_make_affine(const EC_GROUP *, size_t num, EC_POINT *[], BN_CTX *);
-int ec_GFp_simple_field_mul(const EC_GROUP *, BIGNUM *r, const BIGNUM *a, const BIGNUM *b, BN_CTX *);
-int ec_GFp_simple_field_sqr(const EC_GROUP *, BIGNUM *r, const BIGNUM *a, BN_CTX *);
-
-
-/* method functions in ecp_mont.c */
-int ec_GFp_mont_group_init(EC_GROUP *);
-int ec_GFp_mont_group_set_curve(EC_GROUP *, const BIGNUM *p, const BIGNUM *a, const BIGNUM *b, BN_CTX *);
-void ec_GFp_mont_group_finish(EC_GROUP *);
-void ec_GFp_mont_group_clear_finish(EC_GROUP *);
-int ec_GFp_mont_group_copy(EC_GROUP *, const EC_GROUP *);
-int ec_GFp_mont_field_mul(const EC_GROUP *, BIGNUM *r, const BIGNUM *a, const BIGNUM *b, BN_CTX *);
-int ec_GFp_mont_field_sqr(const EC_GROUP *, BIGNUM *r, const BIGNUM *a, BN_CTX *);
-int ec_GFp_mont_field_encode(const EC_GROUP *, BIGNUM *r, const BIGNUM *a, BN_CTX *);
-int ec_GFp_mont_field_decode(const EC_GROUP *, BIGNUM *r, const BIGNUM *a, BN_CTX *);
-int ec_GFp_mont_field_set_to_one(const EC_GROUP *, BIGNUM *r, BN_CTX *);
-
-
-/* method functions in ecp_nist.c */
-int ec_GFp_nist_group_copy(EC_GROUP *dest, const EC_GROUP *src);
-int ec_GFp_nist_group_set_curve(EC_GROUP *, const BIGNUM *p, const BIGNUM *a, const BIGNUM *b, BN_CTX *);
-int ec_GFp_nist_field_mul(const EC_GROUP *, BIGNUM *r, const BIGNUM *a, const BIGNUM *b, BN_CTX *);
-int ec_GFp_nist_field_sqr(const EC_GROUP *, BIGNUM *r, const BIGNUM *a, BN_CTX *);
-
-
-/* method functions in ec2_smpl.c */
-int ec_GF2m_simple_group_init(EC_GROUP *);
-void ec_GF2m_simple_group_finish(EC_GROUP *);
-void ec_GF2m_simple_group_clear_finish(EC_GROUP *);
-int ec_GF2m_simple_group_copy(EC_GROUP *, const EC_GROUP *);
-int ec_GF2m_simple_group_set_curve(EC_GROUP *, const BIGNUM *p, const BIGNUM *a, const BIGNUM *b, BN_CTX *);
-int ec_GF2m_simple_group_get_curve(const EC_GROUP *, BIGNUM *p, BIGNUM *a, BIGNUM *b, BN_CTX *);
-int ec_GF2m_simple_group_get_degree(const EC_GROUP *);
-int ec_GF2m_simple_group_check_discriminant(const EC_GROUP *, BN_CTX *);
-int ec_GF2m_simple_point_init(EC_POINT *);
-void ec_GF2m_simple_point_finish(EC_POINT *);
-void ec_GF2m_simple_point_clear_finish(EC_POINT *);
-int ec_GF2m_simple_point_copy(EC_POINT *, const EC_POINT *);
-int ec_GF2m_simple_point_set_to_infinity(const EC_GROUP *, EC_POINT *);
-int ec_GF2m_simple_point_set_affine_coordinates(const EC_GROUP *, EC_POINT *,
-	const BIGNUM *x, const BIGNUM *y, BN_CTX *);
-int ec_GF2m_simple_point_get_affine_coordinates(const EC_GROUP *, const EC_POINT *,
-	BIGNUM *x, BIGNUM *y, BN_CTX *);
-int ec_GF2m_simple_set_compressed_coordinates(const EC_GROUP *, EC_POINT *,
-	const BIGNUM *x, int y_bit, BN_CTX *);
-size_t ec_GF2m_simple_point2oct(const EC_GROUP *, const EC_POINT *, point_conversion_form_t form,
-	unsigned char *buf, size_t len, BN_CTX *);
-int ec_GF2m_simple_oct2point(const EC_GROUP *, EC_POINT *,
-	const unsigned char *buf, size_t len, BN_CTX *);
-int ec_GF2m_simple_add(const EC_GROUP *, EC_POINT *r, const EC_POINT *a, const EC_POINT *b, BN_CTX *);
-int ec_GF2m_simple_dbl(const EC_GROUP *, EC_POINT *r, const EC_POINT *a, BN_CTX *);
-int ec_GF2m_simple_invert(const EC_GROUP *, EC_POINT *, BN_CTX *);
-int ec_GF2m_simple_is_at_infinity(const EC_GROUP *, const EC_POINT *);
-int ec_GF2m_simple_is_on_curve(const EC_GROUP *, const EC_POINT *, BN_CTX *);
-int ec_GF2m_simple_cmp(const EC_GROUP *, const EC_POINT *a, const EC_POINT *b, BN_CTX *);
-int ec_GF2m_simple_make_affine(const EC_GROUP *, EC_POINT *, BN_CTX *);
-int ec_GF2m_simple_points_make_affine(const EC_GROUP *, size_t num, EC_POINT *[], BN_CTX *);
-int ec_GF2m_simple_field_mul(const EC_GROUP *, BIGNUM *r, const BIGNUM *a, const BIGNUM *b, BN_CTX *);
-int ec_GF2m_simple_field_sqr(const EC_GROUP *, BIGNUM *r, const BIGNUM *a, BN_CTX *);
-int ec_GF2m_simple_field_div(const EC_GROUP *, BIGNUM *r, const BIGNUM *a, const BIGNUM *b, BN_CTX *);
-
-
-/* method functions in ec2_mult.c */
-int ec_GF2m_simple_mul(const EC_GROUP *group, EC_POINT *r, const BIGNUM *scalar,
-	size_t num, const EC_POINT *points[], const BIGNUM *scalars[], BN_CTX *);
-int ec_GF2m_precompute_mult(EC_GROUP *group, BN_CTX *ctx);
-int ec_GF2m_have_precompute_mult(const EC_GROUP *group);
diff --git a/crypto/openssl/crypto/ec/ec_lib.c b/crypto/openssl/crypto/ec/ec_lib.c
deleted file mode 100644
index 5af84376c602..000000000000
--- a/crypto/openssl/crypto/ec/ec_lib.c
+++ /dev/null
@@ -1,1164 +0,0 @@
-/* crypto/ec/ec_lib.c */
-/*
- * Originally written by Bodo Moeller for the OpenSSL project.
- */
-/* ====================================================================
- * Copyright (c) 1998-2003 The OpenSSL Project.  All rights reserved.
- *
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions
- * are met:
- *
- * 1. Redistributions of source code must retain the above copyright
- *    notice, this list of conditions and the following disclaimer. 
- *
- * 2. Redistributions in binary form must reproduce the above copyright
- *    notice, this list of conditions and the following disclaimer in
- *    the documentation and/or other materials provided with the
- *    distribution.
- *
- * 3. All advertising materials mentioning features or use of this
- *    software must display the following acknowledgment:
- *    "This product includes software developed by the OpenSSL Project
- *    for use in the OpenSSL Toolkit. (http://www.openssl.org/)"
- *
- * 4. The names "OpenSSL Toolkit" and "OpenSSL Project" must not be used to
- *    endorse or promote products derived from this software without
- *    prior written permission. For written permission, please contact
- *    openssl-core@openssl.org.
- *
- * 5. Products derived from this software may not be called "OpenSSL"
- *    nor may "OpenSSL" appear in their names without prior written
- *    permission of the OpenSSL Project.
- *
- * 6. Redistributions of any form whatsoever must retain the following
- *    acknowledgment:
- *    "This product includes software developed by the OpenSSL Project
- *    for use in the OpenSSL Toolkit (http://www.openssl.org/)"
- *
- * THIS SOFTWARE IS PROVIDED BY THE OpenSSL PROJECT ``AS IS'' AND ANY
- * EXPRESSED OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
- * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR
- * PURPOSE ARE DISCLAIMED.  IN NO EVENT SHALL THE OpenSSL PROJECT OR
- * ITS CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
- * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
- * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
- * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
- * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
- * STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
- * ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED
- * OF THE POSSIBILITY OF SUCH DAMAGE.
- * ====================================================================
- *
- * This product includes cryptographic software written by Eric Young
- * (eay@cryptsoft.com).  This product includes software written by Tim
- * Hudson (tjh@cryptsoft.com).
- *
- */
-/* ====================================================================
- * Copyright 2002 Sun Microsystems, Inc. ALL RIGHTS RESERVED.
- * Binary polynomial ECC support in OpenSSL originally developed by 
- * SUN MICROSYSTEMS, INC., and contributed to the OpenSSL project.
- */
-
-#include <string.h>
-
-#include <openssl/err.h>
-#include <openssl/opensslv.h>
-
-#include "ec_lcl.h"
-
-static const char EC_version[] = "EC" OPENSSL_VERSION_PTEXT;
-
-
-/* functions for EC_GROUP objects */
-
-EC_GROUP *EC_GROUP_new(const EC_METHOD *meth)
-	{
-	EC_GROUP *ret;
-
-	if (meth == NULL)
-		{
-		ECerr(EC_F_EC_GROUP_NEW, ERR_R_PASSED_NULL_PARAMETER);
-		return NULL;
-		}
-	if (meth->group_init == 0)
-		{
-		ECerr(EC_F_EC_GROUP_NEW, ERR_R_SHOULD_NOT_HAVE_BEEN_CALLED);
-		return NULL;
-		}
-
-	ret = OPENSSL_malloc(sizeof *ret);
-	if (ret == NULL)
-		{
-		ECerr(EC_F_EC_GROUP_NEW, ERR_R_MALLOC_FAILURE);
-		return NULL;
-		}
-
-	ret->meth = meth;
-
-	ret->extra_data = NULL;
-
-	ret->generator = NULL;
-	BN_init(&ret->order);
-	BN_init(&ret->cofactor);
-
-	ret->curve_name = 0;	
-	ret->asn1_flag  = 0;
-	ret->asn1_form  = POINT_CONVERSION_UNCOMPRESSED;
-
-	ret->seed = NULL;
-	ret->seed_len = 0;
-
-	if (!meth->group_init(ret))
-		{
-		OPENSSL_free(ret);
-		return NULL;
-		}
-	
-	return ret;
-	}
-
-
-void EC_GROUP_free(EC_GROUP *group)
-	{
-	if (!group) return;
-
-	if (group->meth->group_finish != 0)
-		group->meth->group_finish(group);
-
-	EC_EX_DATA_free_all_data(&group->extra_data);
-
-	if (group->generator != NULL)
-		EC_POINT_free(group->generator);
-	BN_free(&group->order);
-	BN_free(&group->cofactor);
-
-	if (group->seed)
-		OPENSSL_free(group->seed);
-
-	OPENSSL_free(group);
-	}
- 
-
-void EC_GROUP_clear_free(EC_GROUP *group)
-	{
-	if (!group) return;
-
-	if (group->meth->group_clear_finish != 0)
-		group->meth->group_clear_finish(group);
-	else if (group->meth->group_finish != 0)
-		group->meth->group_finish(group);
-
-	EC_EX_DATA_clear_free_all_data(&group->extra_data);
-
-	if (group->generator != NULL)
-		EC_POINT_clear_free(group->generator);
-	BN_clear_free(&group->order);
-	BN_clear_free(&group->cofactor);
-
-	if (group->seed)
-		{
-		OPENSSL_cleanse(group->seed, group->seed_len);
-		OPENSSL_free(group->seed);
-		}
-
-	OPENSSL_cleanse(group, sizeof *group);
-	OPENSSL_free(group);
-	}
-
-
-int EC_GROUP_copy(EC_GROUP *dest, const EC_GROUP *src)
-	{
-	EC_EXTRA_DATA *d;
-
-	if (dest->meth->group_copy == 0)
-		{
-		ECerr(EC_F_EC_GROUP_COPY, ERR_R_SHOULD_NOT_HAVE_BEEN_CALLED);
-		return 0;
-		}
-	if (dest->meth != src->meth)
-		{
-		ECerr(EC_F_EC_GROUP_COPY, EC_R_INCOMPATIBLE_OBJECTS);
-		return 0;
-		}
-	if (dest == src)
-		return 1;
-	
-	EC_EX_DATA_free_all_data(&dest->extra_data);
-
-	for (d = src->extra_data; d != NULL; d = d->next)
-		{
-		void *t = d->dup_func(d->data);
-		
-		if (t == NULL)
-			return 0;
-		if (!EC_EX_DATA_set_data(&dest->extra_data, t, d->dup_func, d->free_func, d->clear_free_func))
-			return 0;
-		}
-
-	if (src->generator != NULL)
-		{
-		if (dest->generator == NULL)
-			{
-			dest->generator = EC_POINT_new(dest);
-			if (dest->generator == NULL) return 0;
-			}
-		if (!EC_POINT_copy(dest->generator, src->generator)) return 0;
-		}
-	else
-		{
-		/* src->generator == NULL */
-		if (dest->generator != NULL)
-			{
-			EC_POINT_clear_free(dest->generator);
-			dest->generator = NULL;
-			}
-		}
-
-	if (!BN_copy(&dest->order, &src->order)) return 0;
-	if (!BN_copy(&dest->cofactor, &src->cofactor)) return 0;
-
-	dest->curve_name = src->curve_name;
-	dest->asn1_flag  = src->asn1_flag;
-	dest->asn1_form  = src->asn1_form;
-
-	if (src->seed)
-		{
-		if (dest->seed)
-			OPENSSL_free(dest->seed);
-		dest->seed = OPENSSL_malloc(src->seed_len);
-		if (dest->seed == NULL)
-			return 0;
-		if (!memcpy(dest->seed, src->seed, src->seed_len))
-			return 0;
-		dest->seed_len = src->seed_len;
-		}
-	else
-		{
-		if (dest->seed)
-			OPENSSL_free(dest->seed);
-		dest->seed = NULL;
-		dest->seed_len = 0;
-		}
-	
-
-	return dest->meth->group_copy(dest, src);
-	}
-
-
-EC_GROUP *EC_GROUP_dup(const EC_GROUP *a)
-	{
-	EC_GROUP *t = NULL;
-	int ok = 0;
-
-	if (a == NULL) return NULL;
-
-	if ((t = EC_GROUP_new(a->meth)) == NULL) return(NULL);
-	if (!EC_GROUP_copy(t, a)) goto err;
-
-	ok = 1;
-
-  err:	
-	if (!ok)
-		{
-		if (t) EC_GROUP_free(t);
-		return NULL;
-		}
-	else return t;
-	}
-
-
-const EC_METHOD *EC_GROUP_method_of(const EC_GROUP *group)
-	{
-	return group->meth;
-	}
-
-
-int EC_METHOD_get_field_type(const EC_METHOD *meth)
-        {
-        return meth->field_type;
-        }
-
-
-int EC_GROUP_set_generator(EC_GROUP *group, const EC_POINT *generator, const BIGNUM *order, const BIGNUM *cofactor)
-	{
-	if (generator == NULL)
-		{
-		ECerr(EC_F_EC_GROUP_SET_GENERATOR, ERR_R_PASSED_NULL_PARAMETER);
-		return 0   ;
-		}
-
-	if (group->generator == NULL)
-		{
-		group->generator = EC_POINT_new(group);
-		if (group->generator == NULL) return 0;
-		}
-	if (!EC_POINT_copy(group->generator, generator)) return 0;
-
-	if (order != NULL)
-		{ if (!BN_copy(&group->order, order)) return 0; }	
-	else
-		BN_zero(&group->order);
-
-	if (cofactor != NULL)
-		{ if (!BN_copy(&group->cofactor, cofactor)) return 0; }	
-	else
-		BN_zero(&group->cofactor);
-
-	return 1;
-	}
-
-
-const EC_POINT *EC_GROUP_get0_generator(const EC_GROUP *group)
-	{
-	return group->generator;
-	}
-
-
-int EC_GROUP_get_order(const EC_GROUP *group, BIGNUM *order, BN_CTX *ctx)
-	{
-	if (!BN_copy(order, &group->order))
-		return 0;
-
-	return !BN_is_zero(order);
-	}
-
-
-int EC_GROUP_get_cofactor(const EC_GROUP *group, BIGNUM *cofactor, BN_CTX *ctx)
-	{
-	if (!BN_copy(cofactor, &group->cofactor))
-		return 0;
-
-	return !BN_is_zero(&group->cofactor);
-	}
-
-
-void EC_GROUP_set_curve_name(EC_GROUP *group, int nid)
-	{
-	group->curve_name = nid;
-	}
-
-
-int EC_GROUP_get_curve_name(const EC_GROUP *group)
-	{
-	return group->curve_name;
-	}
-
-
-void EC_GROUP_set_asn1_flag(EC_GROUP *group, int flag)
-	{
-	group->asn1_flag = flag;
-	}
-
-
-int EC_GROUP_get_asn1_flag(const EC_GROUP *group)
-	{
-	return group->asn1_flag;
-	}
-
-
-void EC_GROUP_set_point_conversion_form(EC_GROUP *group, 
-                                        point_conversion_form_t form)
-	{
-	group->asn1_form = form;
-	}
-
-
-point_conversion_form_t EC_GROUP_get_point_conversion_form(const EC_GROUP *group)
-	{
-	return group->asn1_form;
-	}
-
-
-size_t EC_GROUP_set_seed(EC_GROUP *group, const unsigned char *p, size_t len)
-	{
-	if (group->seed)
-		{
-		OPENSSL_free(group->seed);
-		group->seed = NULL;
-		group->seed_len = 0;
-		}
-
-	if (!len || !p)
-		return 1;
-
-	if ((group->seed = OPENSSL_malloc(len)) == NULL)
-		return 0;
-	memcpy(group->seed, p, len);
-	group->seed_len = len;
-
-	return len;
-	}
-
-
-unsigned char *EC_GROUP_get0_seed(const EC_GROUP *group)
-	{
-	return group->seed;
-	}
-
-
-size_t EC_GROUP_get_seed_len(const EC_GROUP *group)
-	{
-	return group->seed_len;
-	}
-
-
-int EC_GROUP_set_curve_GFp(EC_GROUP *group, const BIGNUM *p, const BIGNUM *a, const BIGNUM *b, BN_CTX *ctx)
-	{
-	if (group->meth->group_set_curve == 0)
-		{
-		ECerr(EC_F_EC_GROUP_SET_CURVE_GFP, ERR_R_SHOULD_NOT_HAVE_BEEN_CALLED);
-		return 0;
-		}
-	return group->meth->group_set_curve(group, p, a, b, ctx);
-	}
-
-
-int EC_GROUP_get_curve_GFp(const EC_GROUP *group, BIGNUM *p, BIGNUM *a, BIGNUM *b, BN_CTX *ctx)
-	{
-	if (group->meth->group_get_curve == 0)
-		{
-		ECerr(EC_F_EC_GROUP_GET_CURVE_GFP, ERR_R_SHOULD_NOT_HAVE_BEEN_CALLED);
-		return 0;
-		}
-	return group->meth->group_get_curve(group, p, a, b, ctx);
-	}
-
-
-int EC_GROUP_set_curve_GF2m(EC_GROUP *group, const BIGNUM *p, const BIGNUM *a, const BIGNUM *b, BN_CTX *ctx)
-	{
-	if (group->meth->group_set_curve == 0)
-		{
-		ECerr(EC_F_EC_GROUP_SET_CURVE_GF2M, ERR_R_SHOULD_NOT_HAVE_BEEN_CALLED);
-		return 0;
-		}
-	return group->meth->group_set_curve(group, p, a, b, ctx);
-	}
-
-
-int EC_GROUP_get_curve_GF2m(const EC_GROUP *group, BIGNUM *p, BIGNUM *a, BIGNUM *b, BN_CTX *ctx)
-	{
-	if (group->meth->group_get_curve == 0)
-		{
-		ECerr(EC_F_EC_GROUP_GET_CURVE_GF2M, ERR_R_SHOULD_NOT_HAVE_BEEN_CALLED);
-		return 0;
-		}
-	return group->meth->group_get_curve(group, p, a, b, ctx);
-	}
-
-
-int EC_GROUP_get_degree(const EC_GROUP *group)
-	{
-	if (group->meth->group_get_degree == 0)
-		{
-		ECerr(EC_F_EC_GROUP_GET_DEGREE, ERR_R_SHOULD_NOT_HAVE_BEEN_CALLED);
-		return 0;
-		}
-	return group->meth->group_get_degree(group);
-	}
-
-
-int EC_GROUP_check_discriminant(const EC_GROUP *group, BN_CTX *ctx)
-	{
-	if (group->meth->group_check_discriminant == 0)
-		{
-		ECerr(EC_F_EC_GROUP_CHECK_DISCRIMINANT, ERR_R_SHOULD_NOT_HAVE_BEEN_CALLED);
-		return 0;
-		}
-	return group->meth->group_check_discriminant(group, ctx);
-	}
-
-
-int EC_GROUP_cmp(const EC_GROUP *a, const EC_GROUP *b, BN_CTX *ctx)
-	{
-	int    r = 0;
-	BIGNUM *a1, *a2, *a3, *b1, *b2, *b3;
-	BN_CTX *ctx_new = NULL;
-
-	/* compare the field types*/
-	if (EC_METHOD_get_field_type(EC_GROUP_method_of(a)) !=
-	    EC_METHOD_get_field_type(EC_GROUP_method_of(b)))
-		return 1;
-	/* compare the curve name (if present) */
-	if (EC_GROUP_get_curve_name(a) && EC_GROUP_get_curve_name(b) &&
-	    EC_GROUP_get_curve_name(a) == EC_GROUP_get_curve_name(b))
-		return 0;
-
-	if (!ctx)
-		ctx_new = ctx = BN_CTX_new();
-	if (!ctx)
-		return -1;
-	
-	BN_CTX_start(ctx);
-	a1 = BN_CTX_get(ctx);
-	a2 = BN_CTX_get(ctx);
-	a3 = BN_CTX_get(ctx);
-	b1 = BN_CTX_get(ctx);
-	b2 = BN_CTX_get(ctx);
-	b3 = BN_CTX_get(ctx);
-	if (!b3)
-		{
-		BN_CTX_end(ctx);
-		if (ctx_new)
-			BN_CTX_free(ctx);
-		return -1;
-		}
-
-	/* XXX This approach assumes that the external representation
-	 * of curves over the same field type is the same.
-	 */
-	if (!a->meth->group_get_curve(a, a1, a2, a3, ctx) ||
-	    !b->meth->group_get_curve(b, b1, b2, b3, ctx))
-		r = 1;
-
-	if (r || BN_cmp(a1, b1) || BN_cmp(a2, b2) || BN_cmp(a3, b3))
-		r = 1;
-
-	/* XXX EC_POINT_cmp() assumes that the methods are equal */
-	if (r || EC_POINT_cmp(a, EC_GROUP_get0_generator(a),
-	    EC_GROUP_get0_generator(b), ctx))
-		r = 1;
-
-	if (!r)
-		{
-		/* compare the order and cofactor */
-		if (!EC_GROUP_get_order(a, a1, ctx) ||
-		    !EC_GROUP_get_order(b, b1, ctx) ||
-		    !EC_GROUP_get_cofactor(a, a2, ctx) ||
-		    !EC_GROUP_get_cofactor(b, b2, ctx))
-			{
-			BN_CTX_end(ctx);
-			if (ctx_new)
-				BN_CTX_free(ctx);
-			return -1;
-			}
-		if (BN_cmp(a1, b1) || BN_cmp(a2, b2))
-			r = 1;
-		}
-
-	BN_CTX_end(ctx);
-	if (ctx_new)
-		BN_CTX_free(ctx);
-
-	return r;
-	}
-
-
-/* this has 'package' visibility */
-int EC_EX_DATA_set_data(EC_EXTRA_DATA **ex_data, void *data,
-	void *(*dup_func)(void *), void (*free_func)(void *), void (*clear_free_func)(void *))
-	{
-	EC_EXTRA_DATA *d;
-
-	if (ex_data == NULL)
-		return 0;
-
-	for (d = *ex_data; d != NULL; d = d->next)
-		{
-		if (d->dup_func == dup_func && d->free_func == free_func && d->clear_free_func == clear_free_func)
-			{
-			ECerr(EC_F_EC_EX_DATA_SET_DATA, EC_R_SLOT_FULL);
-			return 0;
-			}
-		}
-
-	if (data == NULL)
-		/* no explicit entry needed */
-		return 1;
-
-	d = OPENSSL_malloc(sizeof *d);
-	if (d == NULL)
-		return 0;
-
-	d->data = data;
-	d->dup_func = dup_func;
-	d->free_func = free_func;
-	d->clear_free_func = clear_free_func;
-
-	d->next = *ex_data;
-	*ex_data = d;
-
-	return 1;
-	}
-
-/* this has 'package' visibility */
-void *EC_EX_DATA_get_data(const EC_EXTRA_DATA *ex_data,
-	void *(*dup_func)(void *), void (*free_func)(void *), void (*clear_free_func)(void *))
-	{
-	const EC_EXTRA_DATA *d;
-
-	for (d = ex_data; d != NULL; d = d->next)
-		{
-		if (d->dup_func == dup_func && d->free_func == free_func && d->clear_free_func == clear_free_func)
-			return d->data;
-		}
-	
-	return NULL;
-	}
-
-/* this has 'package' visibility */
-void EC_EX_DATA_free_data(EC_EXTRA_DATA **ex_data,
-	void *(*dup_func)(void *), void (*free_func)(void *), void (*clear_free_func)(void *))
-	{
-	EC_EXTRA_DATA **p;
-
-	if (ex_data == NULL)
-		return;
-
-	for (p = ex_data; *p != NULL; p = &((*p)->next))
-		{
-		if ((*p)->dup_func == dup_func && (*p)->free_func == free_func && (*p)->clear_free_func == clear_free_func)
-			{
-			EC_EXTRA_DATA *next = (*p)->next;
-
-			(*p)->free_func((*p)->data);
-			OPENSSL_free(*p);
-			
-			*p = next;
-			return;
-			}
-		}
-	}
-
-/* this has 'package' visibility */
-void EC_EX_DATA_clear_free_data(EC_EXTRA_DATA **ex_data,
-	void *(*dup_func)(void *), void (*free_func)(void *), void (*clear_free_func)(void *))
-	{
-	EC_EXTRA_DATA **p;
-
-	if (ex_data == NULL)
-		return;
-
-	for (p = ex_data; *p != NULL; p = &((*p)->next))
-		{
-		if ((*p)->dup_func == dup_func && (*p)->free_func == free_func && (*p)->clear_free_func == clear_free_func)
-			{
-			EC_EXTRA_DATA *next = (*p)->next;
-
-			(*p)->clear_free_func((*p)->data);
-			OPENSSL_free(*p);
-			
-			*p = next;
-			return;
-			}
-		}
-	}
-
-/* this has 'package' visibility */
-void EC_EX_DATA_free_all_data(EC_EXTRA_DATA **ex_data)
-	{
-	EC_EXTRA_DATA *d;
-
-	if (ex_data == NULL)
-		return;
-
-	d = *ex_data;
-	while (d)
-		{
-		EC_EXTRA_DATA *next = d->next;
-		
-		d->free_func(d->data);
-		OPENSSL_free(d);
-		
-		d = next;
-		}
-	*ex_data = NULL;
-	}
-
-/* this has 'package' visibility */
-void EC_EX_DATA_clear_free_all_data(EC_EXTRA_DATA **ex_data)
-	{
-	EC_EXTRA_DATA *d;
-
-	if (ex_data == NULL)
-		return;
-
-	d = *ex_data;
-	while (d)
-		{
-		EC_EXTRA_DATA *next = d->next;
-		
-		d->clear_free_func(d->data);
-		OPENSSL_free(d);
-		
-		d = next;
-		}
-	*ex_data = NULL;
-	}
-
-
-/* functions for EC_POINT objects */
-
-EC_POINT *EC_POINT_new(const EC_GROUP *group)
-	{
-	EC_POINT *ret;
-
-	if (group == NULL)
-		{
-		ECerr(EC_F_EC_POINT_NEW, ERR_R_PASSED_NULL_PARAMETER);
-		return NULL;
-		}
-	if (group->meth->point_init == 0)
-		{
-		ECerr(EC_F_EC_POINT_NEW, ERR_R_SHOULD_NOT_HAVE_BEEN_CALLED);
-		return NULL;
-		}
-
-	ret = OPENSSL_malloc(sizeof *ret);
-	if (ret == NULL)
-		{
-		ECerr(EC_F_EC_POINT_NEW, ERR_R_MALLOC_FAILURE);
-		return NULL;
-		}
-
-	ret->meth = group->meth;
-	
-	if (!ret->meth->point_init(ret))
-		{
-		OPENSSL_free(ret);
-		return NULL;
-		}
-	
-	return ret;
-	}
-
-
-void EC_POINT_free(EC_POINT *point)
-	{
-	if (!point) return;
-
-	if (point->meth->point_finish != 0)
-		point->meth->point_finish(point);
-	OPENSSL_free(point);
-	}
- 
-
-void EC_POINT_clear_free(EC_POINT *point)
-	{
-	if (!point) return;
-
-	if (point->meth->point_clear_finish != 0)
-		point->meth->point_clear_finish(point);
-	else if (point->meth != NULL && point->meth->point_finish != 0)
-		point->meth->point_finish(point);
-	OPENSSL_cleanse(point, sizeof *point);
-	OPENSSL_free(point);
-	}
-
-
-int EC_POINT_copy(EC_POINT *dest, const EC_POINT *src)
-	{
-	if (dest->meth->point_copy == 0)
-		{
-		ECerr(EC_F_EC_POINT_COPY, ERR_R_SHOULD_NOT_HAVE_BEEN_CALLED);
-		return 0;
-		}
-	if (dest->meth != src->meth)
-		{
-		ECerr(EC_F_EC_POINT_COPY, EC_R_INCOMPATIBLE_OBJECTS);
-		return 0;
-		}
-	if (dest == src)
-		return 1;
-	return dest->meth->point_copy(dest, src);
-	}
-
-
-EC_POINT *EC_POINT_dup(const EC_POINT *a, const EC_GROUP *group)
-	{
-	EC_POINT *t;
-	int r;
-
-	if (a == NULL) return NULL;
-
-	t = EC_POINT_new(group);
-	if (t == NULL) return(NULL);
-	r = EC_POINT_copy(t, a);
-	if (!r)
-		{
-		EC_POINT_free(t);
-		return NULL;
-		}
-	else return t;
-	}
-
-
-const EC_METHOD *EC_POINT_method_of(const EC_POINT *point)
-	{
-	return point->meth;
-	}
-
-
-int EC_POINT_set_to_infinity(const EC_GROUP *group, EC_POINT *point)
-	{
-	if (group->meth->point_set_to_infinity == 0)
-		{
-		ECerr(EC_F_EC_POINT_SET_TO_INFINITY, ERR_R_SHOULD_NOT_HAVE_BEEN_CALLED);
-		return 0;
-		}
-	if (group->meth != point->meth)
-		{
-		ECerr(EC_F_EC_POINT_SET_TO_INFINITY, EC_R_INCOMPATIBLE_OBJECTS);
-		return 0;
-		}
-	return group->meth->point_set_to_infinity(group, point);
-	}
-
-
-int EC_POINT_set_Jprojective_coordinates_GFp(const EC_GROUP *group, EC_POINT *point,
-	const BIGNUM *x, const BIGNUM *y, const BIGNUM *z, BN_CTX *ctx)
-	{
-	if (group->meth->point_set_Jprojective_coordinates_GFp == 0)
-		{
-		ECerr(EC_F_EC_POINT_SET_JPROJECTIVE_COORDINATES_GFP, ERR_R_SHOULD_NOT_HAVE_BEEN_CALLED);
-		return 0;
-		}
-	if (group->meth != point->meth)
-		{
-		ECerr(EC_F_EC_POINT_SET_JPROJECTIVE_COORDINATES_GFP, EC_R_INCOMPATIBLE_OBJECTS);
-		return 0;
-		}
-	return group->meth->point_set_Jprojective_coordinates_GFp(group, point, x, y, z, ctx);
-	}
-
-
-int EC_POINT_get_Jprojective_coordinates_GFp(const EC_GROUP *group, const EC_POINT *point,
-	BIGNUM *x, BIGNUM *y, BIGNUM *z, BN_CTX *ctx)
-	{
-	if (group->meth->point_get_Jprojective_coordinates_GFp == 0)
-		{
-		ECerr(EC_F_EC_POINT_GET_JPROJECTIVE_COORDINATES_GFP, ERR_R_SHOULD_NOT_HAVE_BEEN_CALLED);
-		return 0;
-		}
-	if (group->meth != point->meth)
-		{
-		ECerr(EC_F_EC_POINT_GET_JPROJECTIVE_COORDINATES_GFP, EC_R_INCOMPATIBLE_OBJECTS);
-		return 0;
-		}
-	return group->meth->point_get_Jprojective_coordinates_GFp(group, point, x, y, z, ctx);
-	}
-
-
-int EC_POINT_set_affine_coordinates_GFp(const EC_GROUP *group, EC_POINT *point,
-	const BIGNUM *x, const BIGNUM *y, BN_CTX *ctx)
-	{
-	if (group->meth->point_set_affine_coordinates == 0)
-		{
-		ECerr(EC_F_EC_POINT_SET_AFFINE_COORDINATES_GFP, ERR_R_SHOULD_NOT_HAVE_BEEN_CALLED);
-		return 0;
-		}
-	if (group->meth != point->meth)
-		{
-		ECerr(EC_F_EC_POINT_SET_AFFINE_COORDINATES_GFP, EC_R_INCOMPATIBLE_OBJECTS);
-		return 0;
-		}
-	return group->meth->point_set_affine_coordinates(group, point, x, y, ctx);
-	}
-
-
-int EC_POINT_set_affine_coordinates_GF2m(const EC_GROUP *group, EC_POINT *point,
-	const BIGNUM *x, const BIGNUM *y, BN_CTX *ctx)
-	{
-	if (group->meth->point_set_affine_coordinates == 0)
-		{
-		ECerr(EC_F_EC_POINT_SET_AFFINE_COORDINATES_GF2M, ERR_R_SHOULD_NOT_HAVE_BEEN_CALLED);
-		return 0;
-		}
-	if (group->meth != point->meth)
-		{
-		ECerr(EC_F_EC_POINT_SET_AFFINE_COORDINATES_GF2M, EC_R_INCOMPATIBLE_OBJECTS);
-		return 0;
-		}
-	return group->meth->point_set_affine_coordinates(group, point, x, y, ctx);
-	}
-
-
-int EC_POINT_get_affine_coordinates_GFp(const EC_GROUP *group, const EC_POINT *point,
-	BIGNUM *x, BIGNUM *y, BN_CTX *ctx)
-	{
-	if (group->meth->point_get_affine_coordinates == 0)
-		{
-		ECerr(EC_F_EC_POINT_GET_AFFINE_COORDINATES_GFP, ERR_R_SHOULD_NOT_HAVE_BEEN_CALLED);
-		return 0;
-		}
-	if (group->meth != point->meth)
-		{
-		ECerr(EC_F_EC_POINT_GET_AFFINE_COORDINATES_GFP, EC_R_INCOMPATIBLE_OBJECTS);
-		return 0;
-		}
-	return group->meth->point_get_affine_coordinates(group, point, x, y, ctx);
-	}
-
-
-int EC_POINT_get_affine_coordinates_GF2m(const EC_GROUP *group, const EC_POINT *point,
-	BIGNUM *x, BIGNUM *y, BN_CTX *ctx)
-	{
-	if (group->meth->point_get_affine_coordinates == 0)
-		{
-		ECerr(EC_F_EC_POINT_GET_AFFINE_COORDINATES_GF2M, ERR_R_SHOULD_NOT_HAVE_BEEN_CALLED);
-		return 0;
-		}
-	if (group->meth != point->meth)
-		{
-		ECerr(EC_F_EC_POINT_GET_AFFINE_COORDINATES_GF2M, EC_R_INCOMPATIBLE_OBJECTS);
-		return 0;
-		}
-	return group->meth->point_get_affine_coordinates(group, point, x, y, ctx);
-	}
-
-
-int EC_POINT_set_compressed_coordinates_GFp(const EC_GROUP *group, EC_POINT *point,
-	const BIGNUM *x, int y_bit, BN_CTX *ctx)
-	{
-	if (group->meth->point_set_compressed_coordinates == 0)
-		{
-		ECerr(EC_F_EC_POINT_SET_COMPRESSED_COORDINATES_GFP, ERR_R_SHOULD_NOT_HAVE_BEEN_CALLED);
-		return 0;
-		}
-	if (group->meth != point->meth)
-		{
-		ECerr(EC_F_EC_POINT_SET_COMPRESSED_COORDINATES_GFP, EC_R_INCOMPATIBLE_OBJECTS);
-		return 0;
-		}
-	return group->meth->point_set_compressed_coordinates(group, point, x, y_bit, ctx);
-	}
-
-
-int EC_POINT_set_compressed_coordinates_GF2m(const EC_GROUP *group, EC_POINT *point,
-	const BIGNUM *x, int y_bit, BN_CTX *ctx)
-	{
-	if (group->meth->point_set_compressed_coordinates == 0)
-		{
-		ECerr(EC_F_EC_POINT_SET_COMPRESSED_COORDINATES_GF2M, ERR_R_SHOULD_NOT_HAVE_BEEN_CALLED);
-		return 0;
-		}
-	if (group->meth != point->meth)
-		{
-		ECerr(EC_F_EC_POINT_SET_COMPRESSED_COORDINATES_GF2M, EC_R_INCOMPATIBLE_OBJECTS);
-		return 0;
-		}
-	return group->meth->point_set_compressed_coordinates(group, point, x, y_bit, ctx);
-	}
-
-
-size_t EC_POINT_point2oct(const EC_GROUP *group, const EC_POINT *point, point_conversion_form_t form,
-        unsigned char *buf, size_t len, BN_CTX *ctx)
-	{
-	if (group->meth->point2oct == 0)
-		{
-		ECerr(EC_F_EC_POINT_POINT2OCT, ERR_R_SHOULD_NOT_HAVE_BEEN_CALLED);
-		return 0;
-		}
-	if (group->meth != point->meth)
-		{
-		ECerr(EC_F_EC_POINT_POINT2OCT, EC_R_INCOMPATIBLE_OBJECTS);
-		return 0;
-		}
-	return group->meth->point2oct(group, point, form, buf, len, ctx);
-	}
-
-
-int EC_POINT_oct2point(const EC_GROUP *group, EC_POINT *point,
-        const unsigned char *buf, size_t len, BN_CTX *ctx)
-	{
-	if (group->meth->oct2point == 0)
-		{
-		ECerr(EC_F_EC_POINT_OCT2POINT, ERR_R_SHOULD_NOT_HAVE_BEEN_CALLED);
-		return 0;
-		}
-	if (group->meth != point->meth)
-		{
-		ECerr(EC_F_EC_POINT_OCT2POINT, EC_R_INCOMPATIBLE_OBJECTS);
-		return 0;
-		}
-	return group->meth->oct2point(group, point, buf, len, ctx);
-	}
-
-
-int EC_POINT_add(const EC_GROUP *group, EC_POINT *r, const EC_POINT *a, const EC_POINT *b, BN_CTX *ctx)
-	{
-	if (group->meth->add == 0)
-		{
-		ECerr(EC_F_EC_POINT_ADD, ERR_R_SHOULD_NOT_HAVE_BEEN_CALLED);
-		return 0;
-		}
-	if ((group->meth != r->meth) || (r->meth != a->meth) || (a->meth != b->meth))
-		{
-		ECerr(EC_F_EC_POINT_ADD, EC_R_INCOMPATIBLE_OBJECTS);
-		return 0;
-		}
-	return group->meth->add(group, r, a, b, ctx);
-	}
-
-
-int EC_POINT_dbl(const EC_GROUP *group, EC_POINT *r, const EC_POINT *a, BN_CTX *ctx)
-	{
-	if (group->meth->dbl == 0)
-		{
-		ECerr(EC_F_EC_POINT_DBL, ERR_R_SHOULD_NOT_HAVE_BEEN_CALLED);
-		return 0;
-		}
-	if ((group->meth != r->meth) || (r->meth != a->meth))
-		{
-		ECerr(EC_F_EC_POINT_DBL, EC_R_INCOMPATIBLE_OBJECTS);
-		return 0;
-		}
-	return group->meth->dbl(group, r, a, ctx);
-	}
-
-
-int EC_POINT_invert(const EC_GROUP *group, EC_POINT *a, BN_CTX *ctx)
-	{
-	if (group->meth->dbl == 0)
-		{
-		ECerr(EC_F_EC_POINT_INVERT, ERR_R_SHOULD_NOT_HAVE_BEEN_CALLED);
-		return 0;
-		}
-	if (group->meth != a->meth)
-		{
-		ECerr(EC_F_EC_POINT_INVERT, EC_R_INCOMPATIBLE_OBJECTS);
-		return 0;
-		}
-	return group->meth->invert(group, a, ctx);
-	}
-
-
-int EC_POINT_is_at_infinity(const EC_GROUP *group, const EC_POINT *point)
-	{
-	if (group->meth->is_at_infinity == 0)
-		{
-		ECerr(EC_F_EC_POINT_IS_AT_INFINITY, ERR_R_SHOULD_NOT_HAVE_BEEN_CALLED);
-		return 0;
-		}
-	if (group->meth != point->meth)
-		{
-		ECerr(EC_F_EC_POINT_IS_AT_INFINITY, EC_R_INCOMPATIBLE_OBJECTS);
-		return 0;
-		}
-	return group->meth->is_at_infinity(group, point);
-	}
-
-
-int EC_POINT_is_on_curve(const EC_GROUP *group, const EC_POINT *point, BN_CTX *ctx)
-	{
-	if (group->meth->is_on_curve == 0)
-		{
-		ECerr(EC_F_EC_POINT_IS_ON_CURVE, ERR_R_SHOULD_NOT_HAVE_BEEN_CALLED);
-		return 0;
-		}
-	if (group->meth != point->meth)
-		{
-		ECerr(EC_F_EC_POINT_IS_ON_CURVE, EC_R_INCOMPATIBLE_OBJECTS);
-		return 0;
-		}
-	return group->meth->is_on_curve(group, point, ctx);
-	}
-
-
-int EC_POINT_cmp(const EC_GROUP *group, const EC_POINT *a, const EC_POINT *b, BN_CTX *ctx)
-	{
-	if (group->meth->point_cmp == 0)
-		{
-		ECerr(EC_F_EC_POINT_CMP, ERR_R_SHOULD_NOT_HAVE_BEEN_CALLED);
-		return 0;
-		}
-	if ((group->meth != a->meth) || (a->meth != b->meth))
-		{
-		ECerr(EC_F_EC_POINT_CMP, EC_R_INCOMPATIBLE_OBJECTS);
-		return 0;
-		}
-	return group->meth->point_cmp(group, a, b, ctx);
-	}
-
-
-int EC_POINT_make_affine(const EC_GROUP *group, EC_POINT *point, BN_CTX *ctx)
-	{
-	if (group->meth->make_affine == 0)
-		{
-		ECerr(EC_F_EC_POINT_MAKE_AFFINE, ERR_R_SHOULD_NOT_HAVE_BEEN_CALLED);
-		return 0;
-		}
-	if (group->meth != point->meth)
-		{
-		ECerr(EC_F_EC_POINT_MAKE_AFFINE, EC_R_INCOMPATIBLE_OBJECTS);
-		return 0;
-		}
-	return group->meth->make_affine(group, point, ctx);
-	}
-
-
-int EC_POINTs_make_affine(const EC_GROUP *group, size_t num, EC_POINT *points[], BN_CTX *ctx)
-	{
-	size_t i;
-
-	if (group->meth->points_make_affine == 0)
-		{
-		ECerr(EC_F_EC_POINTS_MAKE_AFFINE, ERR_R_SHOULD_NOT_HAVE_BEEN_CALLED);
-		return 0;
-		}
-	for (i = 0; i < num; i++)
-		{
-		if (group->meth != points[i]->meth)
-			{
-			ECerr(EC_F_EC_POINTS_MAKE_AFFINE, EC_R_INCOMPATIBLE_OBJECTS);
-			return 0;
-			}
-		}
-	return group->meth->points_make_affine(group, num, points, ctx);
-	}
-
-
-/* Functions for point multiplication.
- *
- * If group->meth->mul is 0, we use the wNAF-based implementations in ec_mult.c;
- * otherwise we dispatch through methods.
- */
-
-int EC_POINTs_mul(const EC_GROUP *group, EC_POINT *r, const BIGNUM *scalar,
-	size_t num, const EC_POINT *points[], const BIGNUM *scalars[], BN_CTX *ctx)
-	{
-	if (group->meth->mul == 0)
-		/* use default */
-		return ec_wNAF_mul(group, r, scalar, num, points, scalars, ctx);
-
-	return group->meth->mul(group, r, scalar, num, points, scalars, ctx);
-	}
-
-int EC_POINT_mul(const EC_GROUP *group, EC_POINT *r, const BIGNUM *g_scalar,
-	const EC_POINT *point, const BIGNUM *p_scalar, BN_CTX *ctx)
-	{
-	/* just a convenient interface to EC_POINTs_mul() */
-
-	const EC_POINT *points[1];
-	const BIGNUM *scalars[1];
-
-	points[0] = point;
-	scalars[0] = p_scalar;
-
-	return EC_POINTs_mul(group, r, g_scalar, (point != NULL && p_scalar != NULL), points, scalars, ctx);
-	}
-
-int EC_GROUP_precompute_mult(EC_GROUP *group, BN_CTX *ctx)
-	{
-	if (group->meth->mul == 0)
-		/* use default */
-		return ec_wNAF_precompute_mult(group, ctx);
-
-	if (group->meth->precompute_mult != 0)
-		return group->meth->precompute_mult(group, ctx);
-	else
-		return 1; /* nothing to do, so report success */
-	}
-
-int EC_GROUP_have_precompute_mult(const EC_GROUP *group)
-	{
-	if (group->meth->mul == 0)
-		/* use default */
-		return ec_wNAF_have_precompute_mult(group);
-
-	if (group->meth->have_precompute_mult != 0)
-		return group->meth->have_precompute_mult(group);
-	else
-		return 0; /* cannot tell whether precomputation has been performed */
-	}
diff --git a/crypto/openssl/crypto/ec/ec_mult.c b/crypto/openssl/crypto/ec/ec_mult.c
deleted file mode 100644
index a045139a0015..000000000000
--- a/crypto/openssl/crypto/ec/ec_mult.c
+++ /dev/null
@@ -1,910 +0,0 @@
-/* crypto/ec/ec_mult.c */
-/*
- * Originally written by Bodo Moeller and Nils Larsch for the OpenSSL project.
- */
-/* ====================================================================
- * Copyright (c) 1998-2003 The OpenSSL Project.  All rights reserved.
- *
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions
- * are met:
- *
- * 1. Redistributions of source code must retain the above copyright
- *    notice, this list of conditions and the following disclaimer. 
- *
- * 2. Redistributions in binary form must reproduce the above copyright
- *    notice, this list of conditions and the following disclaimer in
- *    the documentation and/or other materials provided with the
- *    distribution.
- *
- * 3. All advertising materials mentioning features or use of this
- *    software must display the following acknowledgment:
- *    "This product includes software developed by the OpenSSL Project
- *    for use in the OpenSSL Toolkit. (http://www.openssl.org/)"
- *
- * 4. The names "OpenSSL Toolkit" and "OpenSSL Project" must not be used to
- *    endorse or promote products derived from this software without
- *    prior written permission. For written permission, please contact
- *    openssl-core@openssl.org.
- *
- * 5. Products derived from this software may not be called "OpenSSL"
- *    nor may "OpenSSL" appear in their names without prior written
- *    permission of the OpenSSL Project.
- *
- * 6. Redistributions of any form whatsoever must retain the following
- *    acknowledgment:
- *    "This product includes software developed by the OpenSSL Project
- *    for use in the OpenSSL Toolkit (http://www.openssl.org/)"
- *
- * THIS SOFTWARE IS PROVIDED BY THE OpenSSL PROJECT ``AS IS'' AND ANY
- * EXPRESSED OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
- * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR
- * PURPOSE ARE DISCLAIMED.  IN NO EVENT SHALL THE OpenSSL PROJECT OR
- * ITS CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
- * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
- * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
- * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
- * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
- * STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
- * ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED
- * OF THE POSSIBILITY OF SUCH DAMAGE.
- * ====================================================================
- *
- * This product includes cryptographic software written by Eric Young
- * (eay@cryptsoft.com).  This product includes software written by Tim
- * Hudson (tjh@cryptsoft.com).
- *
- */
-/* ====================================================================
- * Copyright 2002 Sun Microsystems, Inc. ALL RIGHTS RESERVED.
- * Portions of this software developed by SUN MICROSYSTEMS, INC.,
- * and contributed to the OpenSSL project.
- */
-
-#include <string.h>
-
-#include <openssl/err.h>
-
-#include "ec_lcl.h"
-
-
-/*
- * This file implements the wNAF-based interleaving multi-exponentation method
- * (<URL:http://www.informatik.tu-darmstadt.de/TI/Mitarbeiter/moeller.html#multiexp>);
- * for multiplication with precomputation, we use wNAF splitting
- * (<URL:http://www.informatik.tu-darmstadt.de/TI/Mitarbeiter/moeller.html#fastexp>).
- */
-
-
-
-
-/* structure for precomputed multiples of the generator */
-typedef struct ec_pre_comp_st {
-	const EC_GROUP *group; /* parent EC_GROUP object */
-	size_t blocksize;      /* block size for wNAF splitting */
-	size_t numblocks;      /* max. number of blocks for which we have precomputation */
-	size_t w;              /* window size */
-	EC_POINT **points;     /* array with pre-calculated multiples of generator:
-	                        * 'num' pointers to EC_POINT objects followed by a NULL */
-	size_t num;            /* numblocks * 2^(w-1) */
-	int references;
-} EC_PRE_COMP;
- 
-/* functions to manage EC_PRE_COMP within the EC_GROUP extra_data framework */
-static void *ec_pre_comp_dup(void *);
-static void ec_pre_comp_free(void *);
-static void ec_pre_comp_clear_free(void *);
-
-static EC_PRE_COMP *ec_pre_comp_new(const EC_GROUP *group)
-	{
-	EC_PRE_COMP *ret = NULL;
-
-	if (!group)
-		return NULL;
-
-	ret = (EC_PRE_COMP *)OPENSSL_malloc(sizeof(EC_PRE_COMP));
-	if (!ret)
-		return ret;
-	ret->group = group;
-	ret->blocksize = 8; /* default */
-	ret->numblocks = 0;
-	ret->w = 4; /* default */
-	ret->points = NULL;
-	ret->num = 0;
-	ret->references = 1;
-	return ret;
-	}
-
-static void *ec_pre_comp_dup(void *src_)
-	{
-	EC_PRE_COMP *src = src_;
-
-	/* no need to actually copy, these objects never change! */
-
-	CRYPTO_add(&src->references, 1, CRYPTO_LOCK_EC_PRE_COMP);
-
-	return src_;
-	}
-
-static void ec_pre_comp_free(void *pre_)
-	{
-	int i;
-	EC_PRE_COMP *pre = pre_;
-
-	if (!pre)
-		return;
-
-	i = CRYPTO_add(&pre->references, -1, CRYPTO_LOCK_EC_PRE_COMP);
-	if (i > 0)
-		return;
-
-	if (pre->points)
-		{
-		EC_POINT **p;
-
-		for (p = pre->points; *p != NULL; p++)
-			EC_POINT_free(*p);
-		OPENSSL_free(pre->points);
-		}
-	OPENSSL_free(pre);
-	}
-
-static void ec_pre_comp_clear_free(void *pre_)
-	{
-	int i;
-	EC_PRE_COMP *pre = pre_;
-
-	if (!pre)
-		return;
-
-	i = CRYPTO_add(&pre->references, -1, CRYPTO_LOCK_EC_PRE_COMP);
-	if (i > 0)
-		return;
-
-	if (pre->points)
-		{
-		EC_POINT **p;
-
-		for (p = pre->points; *p != NULL; p++)
-			EC_POINT_clear_free(*p);
-		OPENSSL_cleanse(pre->points, sizeof pre->points);
-		OPENSSL_free(pre->points);
-		}
-	OPENSSL_cleanse(pre, sizeof pre);
-	OPENSSL_free(pre);
-	}
-
-
-
-
-/* Determine the modified width-(w+1) Non-Adjacent Form (wNAF) of 'scalar'.
- * This is an array  r[]  of values that are either zero or odd with an
- * absolute value less than  2^w  satisfying
- *     scalar = \sum_j r[j]*2^j
- * where at most one of any  w+1  consecutive digits is non-zero
- * with the exception that the most significant digit may be only
- * w-1 zeros away from that next non-zero digit.
- */
-static signed char *compute_wNAF(const BIGNUM *scalar, int w, size_t *ret_len)
-	{
-	int window_val;
-	int ok = 0;
-	signed char *r = NULL;
-	int sign = 1;
-	int bit, next_bit, mask;
-	size_t len = 0, j;
-	
-	if (w <= 0 || w > 7) /* 'signed char' can represent integers with absolute values less than 2^7 */
-		{
-		ECerr(EC_F_COMPUTE_WNAF, ERR_R_INTERNAL_ERROR);
-		goto err;
-		}
-	bit = 1 << w; /* at most 128 */
-	next_bit = bit << 1; /* at most 256 */
-	mask = next_bit - 1; /* at most 255 */
-
-	if (BN_is_negative(scalar))
-		{
-		sign = -1;
-		}
-
-	len = BN_num_bits(scalar);
-	r = OPENSSL_malloc(len + 1); /* modified wNAF may be one digit longer than binary representation
-	                              * (*ret_len will be set to the actual length, i.e. at most
-	                              * BN_num_bits(scalar) + 1) */
-	if (r == NULL) goto err;
-
-	if (scalar->d == NULL || scalar->top == 0)
-		{
-		ECerr(EC_F_COMPUTE_WNAF, ERR_R_INTERNAL_ERROR);
-		goto err;
-		}
-	window_val = scalar->d[0] & mask;
-	j = 0;
-	while ((window_val != 0) || (j + w + 1 < len)) /* if j+w+1 >= len, window_val will not increase */
-		{
-		int digit = 0;
-
-		/* 0 <= window_val <= 2^(w+1) */
-
-		if (window_val & 1)
-			{
-			/* 0 < window_val < 2^(w+1) */
-
-			if (window_val & bit)
-				{
-				digit = window_val - next_bit; /* -2^w < digit < 0 */
-
-#if 1 /* modified wNAF */
-				if (j + w + 1 >= len)
-					{
-					/* special case for generating modified wNAFs:
-					 * no new bits will be added into window_val,
-					 * so using a positive digit here will decrease
-					 * the total length of the representation */
-					
-					digit = window_val & (mask >> 1); /* 0 < digit < 2^w */
-					}
-#endif
-				}
-			else
-				{
-				digit = window_val; /* 0 < digit < 2^w */
-				}
-			
-			if (digit <= -bit || digit >= bit || !(digit & 1))
-				{
-				ECerr(EC_F_COMPUTE_WNAF, ERR_R_INTERNAL_ERROR);
-				goto err;
-				}
-
-			window_val -= digit;
-
-			/* now window_val is 0 or 2^(w+1) in standard wNAF generation;
-			 * for modified window NAFs, it may also be 2^w
-			 */
-			if (window_val != 0 && window_val != next_bit && window_val != bit)
-				{
-				ECerr(EC_F_COMPUTE_WNAF, ERR_R_INTERNAL_ERROR);
-				goto err;
-				}
-			}
-
-		r[j++] = sign * digit;
-
-		window_val >>= 1;
-		window_val += bit * BN_is_bit_set(scalar, j + w);
-
-		if (window_val > next_bit)
-			{
-			ECerr(EC_F_COMPUTE_WNAF, ERR_R_INTERNAL_ERROR);
-			goto err;
-			}
-		}
-
-	if (j > len + 1)
-		{
-		ECerr(EC_F_COMPUTE_WNAF, ERR_R_INTERNAL_ERROR);
-		goto err;
-		}
-	len = j;
-	ok = 1;
-
- err:
-	if (!ok)
-		{
-		OPENSSL_free(r);
-		r = NULL;
-		}
-	if (ok)
-		*ret_len = len;
-	return r;
-	}
-
-
-/* TODO: table should be optimised for the wNAF-based implementation,
- *       sometimes smaller windows will give better performance
- *       (thus the boundaries should be increased)
- */
-#define EC_window_bits_for_scalar_size(b) \
-		((size_t) \
-		 ((b) >= 2000 ? 6 : \
-		  (b) >=  800 ? 5 : \
-		  (b) >=  300 ? 4 : \
-		  (b) >=   70 ? 3 : \
-		  (b) >=   20 ? 2 : \
-		  1))
-
-/* Compute
- *      \sum scalars[i]*points[i],
- * also including
- *      scalar*generator
- * in the addition if scalar != NULL
- */
-int ec_wNAF_mul(const EC_GROUP *group, EC_POINT *r, const BIGNUM *scalar,
-	size_t num, const EC_POINT *points[], const BIGNUM *scalars[], BN_CTX *ctx)
-	{
-	BN_CTX *new_ctx = NULL;
-	const EC_POINT *generator = NULL;
-	EC_POINT *tmp = NULL;
-	size_t totalnum;
-	size_t blocksize = 0, numblocks = 0; /* for wNAF splitting */
-	size_t pre_points_per_block = 0;
-	size_t i, j;
-	int k;
-	int r_is_inverted = 0;
-	int r_is_at_infinity = 1;
-	size_t *wsize = NULL; /* individual window sizes */
-	signed char **wNAF = NULL; /* individual wNAFs */
-	size_t *wNAF_len = NULL;
-	size_t max_len = 0;
-	size_t num_val;
-	EC_POINT **val = NULL; /* precomputation */
-	EC_POINT **v;
-	EC_POINT ***val_sub = NULL; /* pointers to sub-arrays of 'val' or 'pre_comp->points' */
-	const EC_PRE_COMP *pre_comp = NULL;
-	int num_scalar = 0; /* flag: will be set to 1 if 'scalar' must be treated like other scalars,
-	                     * i.e. precomputation is not available */
-	int ret = 0;
-	
-	if (group->meth != r->meth)
-		{
-		ECerr(EC_F_EC_WNAF_MUL, EC_R_INCOMPATIBLE_OBJECTS);
-		return 0;
-		}
-
-	if ((scalar == NULL) && (num == 0))
-		{
-		return EC_POINT_set_to_infinity(group, r);
-		}
-
-	for (i = 0; i < num; i++)
-		{
-		if (group->meth != points[i]->meth)
-			{
-			ECerr(EC_F_EC_WNAF_MUL, EC_R_INCOMPATIBLE_OBJECTS);
-			return 0;
-			}
-		}
-
-	if (ctx == NULL)
-		{
-		ctx = new_ctx = BN_CTX_new();
-		if (ctx == NULL)
-			goto err;
-		}
-
-	if (scalar != NULL)
-		{
-		generator = EC_GROUP_get0_generator(group);
-		if (generator == NULL)
-			{
-			ECerr(EC_F_EC_WNAF_MUL, EC_R_UNDEFINED_GENERATOR);
-			goto err;
-			}
-		
-		/* look if we can use precomputed multiples of generator */
-
-		pre_comp = EC_EX_DATA_get_data(group->extra_data, ec_pre_comp_dup, ec_pre_comp_free, ec_pre_comp_clear_free);
-
-		if (pre_comp && pre_comp->numblocks && (EC_POINT_cmp(group, generator, pre_comp->points[0], ctx) == 0))
-			{
-			blocksize = pre_comp->blocksize;
-
-			/* determine maximum number of blocks that wNAF splitting may yield
-			 * (NB: maximum wNAF length is bit length plus one) */
-			numblocks = (BN_num_bits(scalar) / blocksize) + 1;
-
-			/* we cannot use more blocks than we have precomputation for */
-			if (numblocks > pre_comp->numblocks)
-				numblocks = pre_comp->numblocks;
-
-			pre_points_per_block = 1u << (pre_comp->w - 1);
-
-			/* check that pre_comp looks sane */
-			if (pre_comp->num != (pre_comp->numblocks * pre_points_per_block))
-				{
-				ECerr(EC_F_EC_WNAF_MUL, ERR_R_INTERNAL_ERROR);
-				goto err;
-				}
-			}
-		else
-			{
-			/* can't use precomputation */
-			pre_comp = NULL;
-			numblocks = 1;
-			num_scalar = 1; /* treat 'scalar' like 'num'-th element of 'scalars' */
-			}
-		}
-	
-	totalnum = num + numblocks;
-
-	wsize    = OPENSSL_malloc(totalnum * sizeof wsize[0]);
-	wNAF_len = OPENSSL_malloc(totalnum * sizeof wNAF_len[0]);
-	wNAF     = OPENSSL_malloc((totalnum + 1) * sizeof wNAF[0]); /* includes space for pivot */
-	val_sub  = OPENSSL_malloc(totalnum * sizeof val_sub[0]);
-		 
-	if (!wsize || !wNAF_len || !wNAF || !val_sub)
-		goto err;
-
-	wNAF[0] = NULL;	/* preliminary pivot */
-
-	/* num_val will be the total number of temporarily precomputed points */
-	num_val = 0;
-
-	for (i = 0; i < num + num_scalar; i++)
-		{
-		size_t bits;
-
-		bits = i < num ? BN_num_bits(scalars[i]) : BN_num_bits(scalar);
-		wsize[i] = EC_window_bits_for_scalar_size(bits);
-		num_val += 1u << (wsize[i] - 1);
-		wNAF[i + 1] = NULL; /* make sure we always have a pivot */
-		wNAF[i] = compute_wNAF((i < num ? scalars[i] : scalar), wsize[i], &wNAF_len[i]);
-		if (wNAF[i] == NULL)
-			goto err;
-		if (wNAF_len[i] > max_len)
-			max_len = wNAF_len[i];
-		}
-
-	if (numblocks)
-		{
-		/* we go here iff scalar != NULL */
-		
-		if (pre_comp == NULL)
-			{
-			if (num_scalar != 1)
-				{
-				ECerr(EC_F_EC_WNAF_MUL, ERR_R_INTERNAL_ERROR);
-				goto err;
-				}
-			/* we have already generated a wNAF for 'scalar' */
-			}
-		else
-			{
-			signed char *tmp_wNAF = NULL;
-			size_t tmp_len = 0;
-			
-			if (num_scalar != 0)
-				{
-				ECerr(EC_F_EC_WNAF_MUL, ERR_R_INTERNAL_ERROR);
-				goto err;
-				}
-
-			/* use the window size for which we have precomputation */
-			wsize[num] = pre_comp->w;
-			tmp_wNAF = compute_wNAF(scalar, wsize[num], &tmp_len);
-			if (!tmp_wNAF)
-				goto err;
-
-			if (tmp_len <= max_len)
-				{
-				/* One of the other wNAFs is at least as long
-				 * as the wNAF belonging to the generator,
-				 * so wNAF splitting will not buy us anything. */
-
-				numblocks = 1;
-				totalnum = num + 1; /* don't use wNAF splitting */
-				wNAF[num] = tmp_wNAF;
-				wNAF[num + 1] = NULL;
-				wNAF_len[num] = tmp_len;
-				if (tmp_len > max_len)
-					max_len = tmp_len;
-				/* pre_comp->points starts with the points that we need here: */
-				val_sub[num] = pre_comp->points;
-				}
-			else
-				{
-				/* don't include tmp_wNAF directly into wNAF array
-				 * - use wNAF splitting and include the blocks */
-
-				signed char *pp;
-				EC_POINT **tmp_points;
-				
-				if (tmp_len < numblocks * blocksize)
-					{
-					/* possibly we can do with fewer blocks than estimated */
-					numblocks = (tmp_len + blocksize - 1) / blocksize;
-					if (numblocks > pre_comp->numblocks)
-						{
-						ECerr(EC_F_EC_WNAF_MUL, ERR_R_INTERNAL_ERROR);
-						goto err;
-						}
-					totalnum = num + numblocks;
-					}
-				
-				/* split wNAF in 'numblocks' parts */
-				pp = tmp_wNAF;
-				tmp_points = pre_comp->points;
-
-				for (i = num; i < totalnum; i++)
-					{
-					if (i < totalnum - 1)
-						{
-						wNAF_len[i] = blocksize;
-						if (tmp_len < blocksize)
-							{
-							ECerr(EC_F_EC_WNAF_MUL, ERR_R_INTERNAL_ERROR);
-							goto err;
-							}
-						tmp_len -= blocksize;
-						}
-					else
-						/* last block gets whatever is left
-						 * (this could be more or less than 'blocksize'!) */
-						wNAF_len[i] = tmp_len;
-					
-					wNAF[i + 1] = NULL;
-					wNAF[i] = OPENSSL_malloc(wNAF_len[i]);
-					if (wNAF[i] == NULL)
-						{
-						OPENSSL_free(tmp_wNAF);
-						goto err;
-						}
-					memcpy(wNAF[i], pp, wNAF_len[i]);
-					if (wNAF_len[i] > max_len)
-						max_len = wNAF_len[i];
-
-					if (*tmp_points == NULL)
-						{
-						ECerr(EC_F_EC_WNAF_MUL, ERR_R_INTERNAL_ERROR);
-						OPENSSL_free(tmp_wNAF);
-						goto err;
-						}
-					val_sub[i] = tmp_points;
-					tmp_points += pre_points_per_block;
-					pp += blocksize;
-					}
-				OPENSSL_free(tmp_wNAF);
-				}
-			}
-		}
-
-	/* All points we precompute now go into a single array 'val'.
-	 * 'val_sub[i]' is a pointer to the subarray for the i-th point,
-	 * or to a subarray of 'pre_comp->points' if we already have precomputation. */
-	val = OPENSSL_malloc((num_val + 1) * sizeof val[0]);
-	if (val == NULL) goto err;
-	val[num_val] = NULL; /* pivot element */
-
-	/* allocate points for precomputation */
-	v = val;
-	for (i = 0; i < num + num_scalar; i++)
-		{
-		val_sub[i] = v;
-		for (j = 0; j < (1u << (wsize[i] - 1)); j++)
-			{
-			*v = EC_POINT_new(group);
-			if (*v == NULL) goto err;
-			v++;
-			}
-		}
-	if (!(v == val + num_val))
-		{
-		ECerr(EC_F_EC_WNAF_MUL, ERR_R_INTERNAL_ERROR);
-		goto err;
-		}
-
-	if (!(tmp = EC_POINT_new(group)))
-		goto err;
-
-	/* prepare precomputed values:
-	 *    val_sub[i][0] :=     points[i]
-	 *    val_sub[i][1] := 3 * points[i]
-	 *    val_sub[i][2] := 5 * points[i]
-	 *    ...
-	 */
-	for (i = 0; i < num + num_scalar; i++)
-		{
-		if (i < num)
-			{
-			if (!EC_POINT_copy(val_sub[i][0], points[i])) goto err;
-			}
-		else
-			{
-			if (!EC_POINT_copy(val_sub[i][0], generator)) goto err;
-			}
-
-		if (wsize[i] > 1)
-			{
-			if (!EC_POINT_dbl(group, tmp, val_sub[i][0], ctx)) goto err;
-			for (j = 1; j < (1u << (wsize[i] - 1)); j++)
-				{
-				if (!EC_POINT_add(group, val_sub[i][j], val_sub[i][j - 1], tmp, ctx)) goto err;
-				}
-			}
-		}
-
-#if 1 /* optional; EC_window_bits_for_scalar_size assumes we do this step */
-	if (!EC_POINTs_make_affine(group, num_val, val, ctx))
-		goto err;
-#endif
-
-	r_is_at_infinity = 1;
-
-	for (k = max_len - 1; k >= 0; k--)
-		{
-		if (!r_is_at_infinity)
-			{
-			if (!EC_POINT_dbl(group, r, r, ctx)) goto err;
-			}
-		
-		for (i = 0; i < totalnum; i++)
-			{
-			if (wNAF_len[i] > (size_t)k)
-				{
-				int digit = wNAF[i][k];
-				int is_neg;
-
-				if (digit) 
-					{
-					is_neg = digit < 0;
-
-					if (is_neg)
-						digit = -digit;
-
-					if (is_neg != r_is_inverted)
-						{
-						if (!r_is_at_infinity)
-							{
-							if (!EC_POINT_invert(group, r, ctx)) goto err;
-							}
-						r_is_inverted = !r_is_inverted;
-						}
-
-					/* digit > 0 */
-
-					if (r_is_at_infinity)
-						{
-						if (!EC_POINT_copy(r, val_sub[i][digit >> 1])) goto err;
-						r_is_at_infinity = 0;
-						}
-					else
-						{
-						if (!EC_POINT_add(group, r, r, val_sub[i][digit >> 1], ctx)) goto err;
-						}
-					}
-				}
-			}
-		}
-
-	if (r_is_at_infinity)
-		{
-		if (!EC_POINT_set_to_infinity(group, r)) goto err;
-		}
-	else
-		{
-		if (r_is_inverted)
-			if (!EC_POINT_invert(group, r, ctx)) goto err;
-		}
-	
-	ret = 1;
-
- err:
-	if (new_ctx != NULL)
-		BN_CTX_free(new_ctx);
-	if (tmp != NULL)
-		EC_POINT_free(tmp);
-	if (wsize != NULL)
-		OPENSSL_free(wsize);
-	if (wNAF_len != NULL)
-		OPENSSL_free(wNAF_len);
-	if (wNAF != NULL)
-		{
-		signed char **w;
-		
-		for (w = wNAF; *w != NULL; w++)
-			OPENSSL_free(*w);
-		
-		OPENSSL_free(wNAF);
-		}
-	if (val != NULL)
-		{
-		for (v = val; *v != NULL; v++)
-			EC_POINT_clear_free(*v);
-
-		OPENSSL_free(val);
-		}
-	if (val_sub != NULL)
-		{
-		OPENSSL_free(val_sub);
-		}
-	return ret;
-	}
-
-
-/* ec_wNAF_precompute_mult()
- * creates an EC_PRE_COMP object with preprecomputed multiples of the generator
- * for use with wNAF splitting as implemented in ec_wNAF_mul().
- * 
- * 'pre_comp->points' is an array of multiples of the generator
- * of the following form:
- * points[0] =     generator;
- * points[1] = 3 * generator;
- * ...
- * points[2^(w-1)-1] =     (2^(w-1)-1) * generator;
- * points[2^(w-1)]   =     2^blocksize * generator;
- * points[2^(w-1)+1] = 3 * 2^blocksize * generator;
- * ...
- * points[2^(w-1)*(numblocks-1)-1] = (2^(w-1)) *  2^(blocksize*(numblocks-2)) * generator
- * points[2^(w-1)*(numblocks-1)]   =              2^(blocksize*(numblocks-1)) * generator
- * ...
- * points[2^(w-1)*numblocks-1]     = (2^(w-1)) *  2^(blocksize*(numblocks-1)) * generator
- * points[2^(w-1)*numblocks]       = NULL
- */
-int ec_wNAF_precompute_mult(EC_GROUP *group, BN_CTX *ctx)
-	{
-	const EC_POINT *generator;
-	EC_POINT *tmp_point = NULL, *base = NULL, **var;
-	BN_CTX *new_ctx = NULL;
-	BIGNUM *order;
-	size_t i, bits, w, pre_points_per_block, blocksize, numblocks, num;
-	EC_POINT **points = NULL;
-	EC_PRE_COMP *pre_comp;
-	int ret = 0;
-
-	/* if there is an old EC_PRE_COMP object, throw it away */
-	EC_EX_DATA_free_data(&group->extra_data, ec_pre_comp_dup, ec_pre_comp_free, ec_pre_comp_clear_free);
-
-	if ((pre_comp = ec_pre_comp_new(group)) == NULL)
-		return 0;
-
-	generator = EC_GROUP_get0_generator(group);
-	if (generator == NULL)
-		{
-		ECerr(EC_F_EC_WNAF_PRECOMPUTE_MULT, EC_R_UNDEFINED_GENERATOR);
-		goto err;
-		}
-
-	if (ctx == NULL)
-		{
-		ctx = new_ctx = BN_CTX_new();
-		if (ctx == NULL)
-			goto err;
-		}
-	
-	BN_CTX_start(ctx);
-	order = BN_CTX_get(ctx);
-	if (order == NULL) goto err;
-	
-	if (!EC_GROUP_get_order(group, order, ctx)) goto err;		
-	if (BN_is_zero(order))
-		{
-		ECerr(EC_F_EC_WNAF_PRECOMPUTE_MULT, EC_R_UNKNOWN_ORDER);
-		goto err;
-		}
-
-	bits = BN_num_bits(order);
-	/* The following parameters mean we precompute (approximately)
-	 * one point per bit.
-	 *
-	 * TBD: The combination  8, 4  is perfect for 160 bits; for other
-	 * bit lengths, other parameter combinations might provide better
-	 * efficiency.
-	 */
-	blocksize = 8;
-	w = 4;
-	if (EC_window_bits_for_scalar_size(bits) > w)
-		{
-		/* let's not make the window too small ... */
-		w = EC_window_bits_for_scalar_size(bits);
-		}
-
-	numblocks = (bits + blocksize - 1) / blocksize; /* max. number of blocks to use for wNAF splitting */
-	
-	pre_points_per_block = 1u << (w - 1);
-	num = pre_points_per_block * numblocks; /* number of points to compute and store */
-
-	points = OPENSSL_malloc(sizeof (EC_POINT*)*(num + 1));
-	if (!points)
-		{
-		ECerr(EC_F_EC_WNAF_PRECOMPUTE_MULT, ERR_R_MALLOC_FAILURE);
-		goto err;
-		}
-
-	var = points;
-	var[num] = NULL; /* pivot */
-	for (i = 0; i < num; i++)
-		{
-		if ((var[i] = EC_POINT_new(group)) == NULL)
-			{
-			ECerr(EC_F_EC_WNAF_PRECOMPUTE_MULT, ERR_R_MALLOC_FAILURE);
-			goto err;
-			}
-		}
-
-	if (!(tmp_point = EC_POINT_new(group)) || !(base = EC_POINT_new(group)))
-		{
-		ECerr(EC_F_EC_WNAF_PRECOMPUTE_MULT, ERR_R_MALLOC_FAILURE);
-		goto err;
-		}	
-	
-	if (!EC_POINT_copy(base, generator))
-		goto err;
-	
-	/* do the precomputation */
-	for (i = 0; i < numblocks; i++)
-		{
-		size_t j;
-
-		if (!EC_POINT_dbl(group, tmp_point, base, ctx))
-			goto err;
-
-		if (!EC_POINT_copy(*var++, base))
-			goto err;
-
-		for (j = 1; j < pre_points_per_block; j++, var++)
-			{
-			/* calculate odd multiples of the current base point */
-			if (!EC_POINT_add(group, *var, tmp_point, *(var - 1), ctx))
-				goto err;
-			}
-
-		if (i < numblocks - 1)
-			{
-			/* get the next base (multiply current one by 2^blocksize) */
-			size_t k;
-
-			if (blocksize <= 2)
-				{
-				ECerr(EC_F_EC_WNAF_PRECOMPUTE_MULT, ERR_R_INTERNAL_ERROR);
-				goto err;
-				}				
-
-			if (!EC_POINT_dbl(group, base, tmp_point, ctx))
-				goto err;
-			for (k = 2; k < blocksize; k++)
-				{
-				if (!EC_POINT_dbl(group,base,base,ctx))
-					goto err;
-				}
-			}
- 		}
-
-	if (!EC_POINTs_make_affine(group, num, points, ctx))
-		goto err;
-	
-	pre_comp->group = group;
-	pre_comp->blocksize = blocksize;
-	pre_comp->numblocks = numblocks;
-	pre_comp->w = w;
-	pre_comp->points = points;
-	points = NULL;
-	pre_comp->num = num;
-
-	if (!EC_EX_DATA_set_data(&group->extra_data, pre_comp,
-		ec_pre_comp_dup, ec_pre_comp_free, ec_pre_comp_clear_free))
-		goto err;
-	pre_comp = NULL;
-
-	ret = 1;
- err:
-	if (ctx != NULL)
-		BN_CTX_end(ctx);
-	if (new_ctx != NULL)
-		BN_CTX_free(new_ctx);
-	if (pre_comp)
-		ec_pre_comp_free(pre_comp);
-	if (points)
-		{
-		EC_POINT **p;
-
-		for (p = points; *p != NULL; p++)
-			EC_POINT_free(*p);
-		OPENSSL_free(points);
-		}
-	if (tmp_point)
-		EC_POINT_free(tmp_point);
-	if (base)
-		EC_POINT_free(base);
-	return ret;
-	}
-
-
-int ec_wNAF_have_precompute_mult(const EC_GROUP *group)
-	{
-	if (EC_EX_DATA_get_data(group->extra_data, ec_pre_comp_dup, ec_pre_comp_free, ec_pre_comp_clear_free) != NULL)
-		return 1;
-	else
-		return 0;
-	}
diff --git a/crypto/openssl/crypto/ec/ec_print.c b/crypto/openssl/crypto/ec/ec_print.c
deleted file mode 100644
index f7c8a303acaf..000000000000
--- a/crypto/openssl/crypto/ec/ec_print.c
+++ /dev/null
@@ -1,195 +0,0 @@
-/* crypto/ec/ec_print.c */
-/* ====================================================================
- * Copyright (c) 1998-2002 The OpenSSL Project.  All rights reserved.
- *
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions
- * are met:
- *
- * 1. Redistributions of source code must retain the above copyright
- *    notice, this list of conditions and the following disclaimer. 
- *
- * 2. Redistributions in binary form must reproduce the above copyright
- *    notice, this list of conditions and the following disclaimer in
- *    the documentation and/or other materials provided with the
- *    distribution.
- *
- * 3. All advertising materials mentioning features or use of this
- *    software must display the following acknowledgment:
- *    "This product includes software developed by the OpenSSL Project
- *    for use in the OpenSSL Toolkit. (http://www.openssl.org/)"
- *
- * 4. The names "OpenSSL Toolkit" and "OpenSSL Project" must not be used to
- *    endorse or promote products derived from this software without
- *    prior written permission. For written permission, please contact
- *    openssl-core@openssl.org.
- *
- * 5. Products derived from this software may not be called "OpenSSL"
- *    nor may "OpenSSL" appear in their names without prior written
- *    permission of the OpenSSL Project.
- *
- * 6. Redistributions of any form whatsoever must retain the following
- *    acknowledgment:
- *    "This product includes software developed by the OpenSSL Project
- *    for use in the OpenSSL Toolkit (http://www.openssl.org/)"
- *
- * THIS SOFTWARE IS PROVIDED BY THE OpenSSL PROJECT ``AS IS'' AND ANY
- * EXPRESSED OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
- * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR
- * PURPOSE ARE DISCLAIMED.  IN NO EVENT SHALL THE OpenSSL PROJECT OR
- * ITS CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
- * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
- * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
- * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
- * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
- * STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
- * ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED
- * OF THE POSSIBILITY OF SUCH DAMAGE.
- * ====================================================================
- *
- * This product includes cryptographic software written by Eric Young
- * (eay@cryptsoft.com).  This product includes software written by Tim
- * Hudson (tjh@cryptsoft.com).
- *
- */
-
-#include <openssl/crypto.h>
-#include "ec_lcl.h"
-
-BIGNUM *EC_POINT_point2bn(const EC_GROUP *group, 
-                          const EC_POINT *point, 
-                          point_conversion_form_t form,
-                          BIGNUM *ret,
-                          BN_CTX *ctx)
-	{
-	size_t        buf_len=0;
-	unsigned char *buf;
-
-	buf_len = EC_POINT_point2oct(group, point, form,
-                                     NULL, 0, ctx);
-	if (buf_len == 0)
-		return NULL;
-
-	if ((buf = OPENSSL_malloc(buf_len)) == NULL)
-		return NULL;
-
-	if (!EC_POINT_point2oct(group, point, form, buf, buf_len, ctx))
-		{
-		OPENSSL_free(buf);
-		return NULL;
-		}
-
-	ret = BN_bin2bn(buf, buf_len, ret);
-
-	OPENSSL_free(buf);
-
-	return ret;
-}
-
-EC_POINT *EC_POINT_bn2point(const EC_GROUP *group,
-                            const BIGNUM *bn,
-                            EC_POINT *point, 
-                            BN_CTX *ctx)
-	{
-	size_t        buf_len=0;
-	unsigned char *buf;
-	EC_POINT      *ret;
-
-	if ((buf_len = BN_num_bytes(bn)) == 0) return NULL;
-	buf = OPENSSL_malloc(buf_len);
-	if (buf == NULL)
-		return NULL;
-
-	if (!BN_bn2bin(bn, buf)) 
-		{
-		OPENSSL_free(buf);
-		return NULL;
-		}
-
-	if (point == NULL)
-		{
-		if ((ret = EC_POINT_new(group)) == NULL)
-			{
-			OPENSSL_free(buf);
-			return NULL;
-			}
-		}
-	else
-		ret = point;
-
-	if (!EC_POINT_oct2point(group, ret, buf, buf_len, ctx))
-		{
-		if (point == NULL)
-			EC_POINT_clear_free(ret);
-		OPENSSL_free(buf);
-		return NULL;
-		}
-
-	OPENSSL_free(buf);
-	return ret;
-	}
-
-static const char *HEX_DIGITS = "0123456789ABCDEF";
-
-/* the return value must be freed (using OPENSSL_free()) */
-char *EC_POINT_point2hex(const EC_GROUP *group,
-                         const EC_POINT *point,
-                         point_conversion_form_t form,
-                         BN_CTX *ctx)
-	{
-	char          *ret, *p;
-	size_t        buf_len=0,i;
-	unsigned char *buf, *pbuf;
-
-	buf_len = EC_POINT_point2oct(group, point, form,
-                                     NULL, 0, ctx);
-	if (buf_len == 0)
-		return NULL;
-
-	if ((buf = OPENSSL_malloc(buf_len)) == NULL)
-		return NULL;
-
-	if (!EC_POINT_point2oct(group, point, form, buf, buf_len, ctx))
-		{
-		OPENSSL_free(buf);
-		return NULL;
-		}
-
-	ret = (char *)OPENSSL_malloc(buf_len*2+2);
-	if (ret == NULL)
-		{
-		OPENSSL_free(buf);
-		return NULL;
-		}
-	p = ret;
-	pbuf = buf;
-	for (i=buf_len; i > 0; i--)
-		{
-			int v = (int) *(pbuf++);
-			*(p++)=HEX_DIGITS[v>>4];
-			*(p++)=HEX_DIGITS[v&0x0F];
-		}
-	*p='\0';
-
-	OPENSSL_free(buf);
-
-	return ret;
-	}
-
-EC_POINT *EC_POINT_hex2point(const EC_GROUP *group,
-                             const char *buf,
-                             EC_POINT *point,
-                             BN_CTX *ctx)
-	{
-	EC_POINT *ret=NULL;
-	BIGNUM   *tmp_bn=NULL;
-
-	if (!BN_hex2bn(&tmp_bn, buf))
-		return NULL;
-
-	ret = EC_POINT_bn2point(group, tmp_bn, point, ctx);
-
-	BN_clear_free(tmp_bn);
-
-	return ret;
-	}
diff --git a/crypto/openssl/crypto/ec/ecp_mont.c b/crypto/openssl/crypto/ec/ecp_mont.c
deleted file mode 100644
index 9fc4a466a59f..000000000000
--- a/crypto/openssl/crypto/ec/ecp_mont.c
+++ /dev/null
@@ -1,315 +0,0 @@
-/* crypto/ec/ecp_mont.c */
-/*
- * Originally written by Bodo Moeller for the OpenSSL project.
- */
-/* ====================================================================
- * Copyright (c) 1998-2001 The OpenSSL Project.  All rights reserved.
- *
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions
- * are met:
- *
- * 1. Redistributions of source code must retain the above copyright
- *    notice, this list of conditions and the following disclaimer. 
- *
- * 2. Redistributions in binary form must reproduce the above copyright
- *    notice, this list of conditions and the following disclaimer in
- *    the documentation and/or other materials provided with the
- *    distribution.
- *
- * 3. All advertising materials mentioning features or use of this
- *    software must display the following acknowledgment:
- *    "This product includes software developed by the OpenSSL Project
- *    for use in the OpenSSL Toolkit. (http://www.openssl.org/)"
- *
- * 4. The names "OpenSSL Toolkit" and "OpenSSL Project" must not be used to
- *    endorse or promote products derived from this software without
- *    prior written permission. For written permission, please contact
- *    openssl-core@openssl.org.
- *
- * 5. Products derived from this software may not be called "OpenSSL"
- *    nor may "OpenSSL" appear in their names without prior written
- *    permission of the OpenSSL Project.
- *
- * 6. Redistributions of any form whatsoever must retain the following
- *    acknowledgment:
- *    "This product includes software developed by the OpenSSL Project
- *    for use in the OpenSSL Toolkit (http://www.openssl.org/)"
- *
- * THIS SOFTWARE IS PROVIDED BY THE OpenSSL PROJECT ``AS IS'' AND ANY
- * EXPRESSED OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
- * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR
- * PURPOSE ARE DISCLAIMED.  IN NO EVENT SHALL THE OpenSSL PROJECT OR
- * ITS CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
- * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
- * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
- * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
- * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
- * STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
- * ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED
- * OF THE POSSIBILITY OF SUCH DAMAGE.
- * ====================================================================
- *
- * This product includes cryptographic software written by Eric Young
- * (eay@cryptsoft.com).  This product includes software written by Tim
- * Hudson (tjh@cryptsoft.com).
- *
- */
-/* ====================================================================
- * Copyright 2002 Sun Microsystems, Inc. ALL RIGHTS RESERVED.
- * Portions of this software developed by SUN MICROSYSTEMS, INC.,
- * and contributed to the OpenSSL project.
- */
-
-#include <openssl/err.h>
-
-#include "ec_lcl.h"
-
-
-const EC_METHOD *EC_GFp_mont_method(void)
-	{
-	static const EC_METHOD ret = {
-		NID_X9_62_prime_field,
-		ec_GFp_mont_group_init,
-		ec_GFp_mont_group_finish,
-		ec_GFp_mont_group_clear_finish,
-		ec_GFp_mont_group_copy,
-		ec_GFp_mont_group_set_curve,
-		ec_GFp_simple_group_get_curve,
-		ec_GFp_simple_group_get_degree,
-		ec_GFp_simple_group_check_discriminant,
-		ec_GFp_simple_point_init,
-		ec_GFp_simple_point_finish,
-		ec_GFp_simple_point_clear_finish,
-		ec_GFp_simple_point_copy,
-		ec_GFp_simple_point_set_to_infinity,
-		ec_GFp_simple_set_Jprojective_coordinates_GFp,
-		ec_GFp_simple_get_Jprojective_coordinates_GFp,
-		ec_GFp_simple_point_set_affine_coordinates,
-		ec_GFp_simple_point_get_affine_coordinates,
-		ec_GFp_simple_set_compressed_coordinates,
-		ec_GFp_simple_point2oct,
-		ec_GFp_simple_oct2point,
-		ec_GFp_simple_add,
-		ec_GFp_simple_dbl,
-		ec_GFp_simple_invert,
-		ec_GFp_simple_is_at_infinity,
-		ec_GFp_simple_is_on_curve,
-		ec_GFp_simple_cmp,
-		ec_GFp_simple_make_affine,
-		ec_GFp_simple_points_make_affine,
-		0 /* mul */,
-		0 /* precompute_mult */,
-		0 /* have_precompute_mult */,	
-		ec_GFp_mont_field_mul,
-		ec_GFp_mont_field_sqr,
-		0 /* field_div */,
-		ec_GFp_mont_field_encode,
-		ec_GFp_mont_field_decode,
-		ec_GFp_mont_field_set_to_one };
-
-	return &ret;
-	}
-
-
-int ec_GFp_mont_group_init(EC_GROUP *group)
-	{
-	int ok;
-
-	ok = ec_GFp_simple_group_init(group);
-	group->field_data1 = NULL;
-	group->field_data2 = NULL;
-	return ok;
-	}
-
-
-void ec_GFp_mont_group_finish(EC_GROUP *group)
-	{
-	if (group->field_data1 != NULL)
-		{
-		BN_MONT_CTX_free(group->field_data1);
-		group->field_data1 = NULL;
-		}
-	if (group->field_data2 != NULL)
-		{
-		BN_free(group->field_data2);
-		group->field_data2 = NULL;
-		}
-	ec_GFp_simple_group_finish(group);
-	}
-
-
-void ec_GFp_mont_group_clear_finish(EC_GROUP *group)
-	{
-	if (group->field_data1 != NULL)
-		{
-		BN_MONT_CTX_free(group->field_data1);
-		group->field_data1 = NULL;
-		}
-	if (group->field_data2 != NULL)
-		{
-		BN_clear_free(group->field_data2);
-		group->field_data2 = NULL;
-		}
-	ec_GFp_simple_group_clear_finish(group);
-	}
-
-
-int ec_GFp_mont_group_copy(EC_GROUP *dest, const EC_GROUP *src)
-	{
-	if (dest->field_data1 != NULL)
-		{
-		BN_MONT_CTX_free(dest->field_data1);
-		dest->field_data1 = NULL;
-		}
-	if (dest->field_data2 != NULL)
-		{
-		BN_clear_free(dest->field_data2);
-		dest->field_data2 = NULL;
-		}
-
-	if (!ec_GFp_simple_group_copy(dest, src)) return 0;
-
-	if (src->field_data1 != NULL)
-		{
-		dest->field_data1 = BN_MONT_CTX_new();
-		if (dest->field_data1 == NULL) return 0;
-		if (!BN_MONT_CTX_copy(dest->field_data1, src->field_data1)) goto err;
-		}
-	if (src->field_data2 != NULL)
-		{
-		dest->field_data2 = BN_dup(src->field_data2);
-		if (dest->field_data2 == NULL) goto err;
-		}
-
-	return 1;
-
- err:
-	if (dest->field_data1 != NULL)
-		{
-		BN_MONT_CTX_free(dest->field_data1);
-		dest->field_data1 = NULL;
-		}
-	return 0;	
-	}
-
-
-int ec_GFp_mont_group_set_curve(EC_GROUP *group, const BIGNUM *p, const BIGNUM *a, const BIGNUM *b, BN_CTX *ctx)
-	{
-	BN_CTX *new_ctx = NULL;
-	BN_MONT_CTX *mont = NULL;
-	BIGNUM *one = NULL;
-	int ret = 0;
-
-	if (group->field_data1 != NULL)
-		{
-		BN_MONT_CTX_free(group->field_data1);
-		group->field_data1 = NULL;
-		}
-	if (group->field_data2 != NULL)
-		{
-		BN_free(group->field_data2);
-		group->field_data2 = NULL;
-		}
-	
-	if (ctx == NULL)
-		{
-		ctx = new_ctx = BN_CTX_new();
-		if (ctx == NULL)
-			return 0;
-		}
-
-	mont = BN_MONT_CTX_new();
-	if (mont == NULL) goto err;
-	if (!BN_MONT_CTX_set(mont, p, ctx))
-		{
-		ECerr(EC_F_EC_GFP_MONT_GROUP_SET_CURVE, ERR_R_BN_LIB);
-		goto err;
-		}
-	one = BN_new();
-	if (one == NULL) goto err;
-	if (!BN_to_montgomery(one, BN_value_one(), mont, ctx)) goto err;
-
-	group->field_data1 = mont;
-	mont = NULL;
-	group->field_data2 = one;
-	one = NULL;
-
-	ret = ec_GFp_simple_group_set_curve(group, p, a, b, ctx);
-
-	if (!ret)
-		{
-		BN_MONT_CTX_free(group->field_data1);
-		group->field_data1 = NULL;
-		BN_free(group->field_data2);
-		group->field_data2 = NULL;
-		}
-
- err:
-	if (new_ctx != NULL)
-		BN_CTX_free(new_ctx);
-	if (mont != NULL)
-		BN_MONT_CTX_free(mont);
-	return ret;
-	}
-
-
-int ec_GFp_mont_field_mul(const EC_GROUP *group, BIGNUM *r, const BIGNUM *a, const BIGNUM *b, BN_CTX *ctx)
-	{
-	if (group->field_data1 == NULL)
-		{
-		ECerr(EC_F_EC_GFP_MONT_FIELD_MUL, EC_R_NOT_INITIALIZED);
-		return 0;
-		}
-
-	return BN_mod_mul_montgomery(r, a, b, group->field_data1, ctx);
-	}
-
-
-int ec_GFp_mont_field_sqr(const EC_GROUP *group, BIGNUM *r, const BIGNUM *a, BN_CTX *ctx)
-	{
-	if (group->field_data1 == NULL)
-		{
-		ECerr(EC_F_EC_GFP_MONT_FIELD_SQR, EC_R_NOT_INITIALIZED);
-		return 0;
-		}
-
-	return BN_mod_mul_montgomery(r, a, a, group->field_data1, ctx);
-	}
-
-
-int ec_GFp_mont_field_encode(const EC_GROUP *group, BIGNUM *r, const BIGNUM *a, BN_CTX *ctx)
-	{
-	if (group->field_data1 == NULL)
-		{
-		ECerr(EC_F_EC_GFP_MONT_FIELD_ENCODE, EC_R_NOT_INITIALIZED);
-		return 0;
-		}
-
-	return BN_to_montgomery(r, a, (BN_MONT_CTX *)group->field_data1, ctx);
-	}
-
-
-int ec_GFp_mont_field_decode(const EC_GROUP *group, BIGNUM *r, const BIGNUM *a, BN_CTX *ctx)
-	{
-	if (group->field_data1 == NULL)
-		{
-		ECerr(EC_F_EC_GFP_MONT_FIELD_DECODE, EC_R_NOT_INITIALIZED);
-		return 0;
-		}
-
-	return BN_from_montgomery(r, a, group->field_data1, ctx);
-	}
-
-
-int ec_GFp_mont_field_set_to_one(const EC_GROUP *group, BIGNUM *r, BN_CTX *ctx)
-	{
-	if (group->field_data2 == NULL)
-		{
-		ECerr(EC_F_EC_GFP_MONT_FIELD_SET_TO_ONE, EC_R_NOT_INITIALIZED);
-		return 0;
-		}
-
-	if (!BN_copy(r, group->field_data2)) return 0;
-	return 1;
-	}
diff --git a/crypto/openssl/crypto/ec/ecp_nist.c b/crypto/openssl/crypto/ec/ecp_nist.c
deleted file mode 100644
index 71893d5eaba1..000000000000
--- a/crypto/openssl/crypto/ec/ecp_nist.c
+++ /dev/null
@@ -1,236 +0,0 @@
-/* crypto/ec/ecp_nist.c */
-/*
- * Written by Nils Larsch for the OpenSSL project.
- */
-/* ====================================================================
- * Copyright (c) 1998-2003 The OpenSSL Project.  All rights reserved.
- *
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions
- * are met:
- *
- * 1. Redistributions of source code must retain the above copyright
- *    notice, this list of conditions and the following disclaimer. 
- *
- * 2. Redistributions in binary form must reproduce the above copyright
- *    notice, this list of conditions and the following disclaimer in
- *    the documentation and/or other materials provided with the
- *    distribution.
- *
- * 3. All advertising materials mentioning features or use of this
- *    software must display the following acknowledgment:
- *    "This product includes software developed by the OpenSSL Project
- *    for use in the OpenSSL Toolkit. (http://www.openssl.org/)"
- *
- * 4. The names "OpenSSL Toolkit" and "OpenSSL Project" must not be used to
- *    endorse or promote products derived from this software without
- *    prior written permission. For written permission, please contact
- *    openssl-core@openssl.org.
- *
- * 5. Products derived from this software may not be called "OpenSSL"
- *    nor may "OpenSSL" appear in their names without prior written
- *    permission of the OpenSSL Project.
- *
- * 6. Redistributions of any form whatsoever must retain the following
- *    acknowledgment:
- *    "This product includes software developed by the OpenSSL Project
- *    for use in the OpenSSL Toolkit (http://www.openssl.org/)"
- *
- * THIS SOFTWARE IS PROVIDED BY THE OpenSSL PROJECT ``AS IS'' AND ANY
- * EXPRESSED OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
- * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR
- * PURPOSE ARE DISCLAIMED.  IN NO EVENT SHALL THE OpenSSL PROJECT OR
- * ITS CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
- * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
- * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
- * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
- * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
- * STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
- * ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED
- * OF THE POSSIBILITY OF SUCH DAMAGE.
- * ====================================================================
- *
- * This product includes cryptographic software written by Eric Young
- * (eay@cryptsoft.com).  This product includes software written by Tim
- * Hudson (tjh@cryptsoft.com).
- *
- */
-/* ====================================================================
- * Copyright 2002 Sun Microsystems, Inc. ALL RIGHTS RESERVED.
- * Portions of this software developed by SUN MICROSYSTEMS, INC.,
- * and contributed to the OpenSSL project.
- */
-
-#include <limits.h>
-
-#include <openssl/err.h>
-#include <openssl/obj_mac.h>
-#include "ec_lcl.h"
-
-const EC_METHOD *EC_GFp_nist_method(void)
-	{
-	static const EC_METHOD ret = {
-		NID_X9_62_prime_field,
-		ec_GFp_simple_group_init,
-		ec_GFp_simple_group_finish,
-		ec_GFp_simple_group_clear_finish,
-		ec_GFp_nist_group_copy,
-		ec_GFp_nist_group_set_curve,
-		ec_GFp_simple_group_get_curve,
-		ec_GFp_simple_group_get_degree,
-		ec_GFp_simple_group_check_discriminant,
-		ec_GFp_simple_point_init,
-		ec_GFp_simple_point_finish,
-		ec_GFp_simple_point_clear_finish,
-		ec_GFp_simple_point_copy,
-		ec_GFp_simple_point_set_to_infinity,
-		ec_GFp_simple_set_Jprojective_coordinates_GFp,
-		ec_GFp_simple_get_Jprojective_coordinates_GFp,
-		ec_GFp_simple_point_set_affine_coordinates,
-		ec_GFp_simple_point_get_affine_coordinates,
-		ec_GFp_simple_set_compressed_coordinates,
-		ec_GFp_simple_point2oct,
-		ec_GFp_simple_oct2point,
-		ec_GFp_simple_add,
-		ec_GFp_simple_dbl,
-		ec_GFp_simple_invert,
-		ec_GFp_simple_is_at_infinity,
-		ec_GFp_simple_is_on_curve,
-		ec_GFp_simple_cmp,
-		ec_GFp_simple_make_affine,
-		ec_GFp_simple_points_make_affine,
-		0 /* mul */,
-		0 /* precompute_mult */,
-		0 /* have_precompute_mult */,	
-		ec_GFp_nist_field_mul,
-		ec_GFp_nist_field_sqr,
-		0 /* field_div */,
-		0 /* field_encode */,
-		0 /* field_decode */,
-		0 /* field_set_to_one */ };
-
-	return &ret;
-	}
-
-#if BN_BITS2 == 64
-#define	NO_32_BIT_TYPE
-#endif
-
-int ec_GFp_nist_group_copy(EC_GROUP *dest, const EC_GROUP *src)
-	{
-	dest->field_mod_func = src->field_mod_func;
-
-	return ec_GFp_simple_group_copy(dest, src);
-	}
-
-int ec_GFp_nist_group_set_curve(EC_GROUP *group, const BIGNUM *p,
-	const BIGNUM *a, const BIGNUM *b, BN_CTX *ctx)
-	{
-	int ret = 0;
-	BN_CTX *new_ctx = NULL;
-	BIGNUM *tmp_bn;
-	
-	if (ctx == NULL)
-		if ((ctx = new_ctx = BN_CTX_new()) == NULL) return 0;
-
-	BN_CTX_start(ctx);
-	if ((tmp_bn = BN_CTX_get(ctx)) == NULL) goto err;
-
-	if (BN_ucmp(BN_get0_nist_prime_192(), p) == 0)
-		group->field_mod_func = BN_nist_mod_192;
-	else if (BN_ucmp(BN_get0_nist_prime_224(), p) == 0)
-		{
-#ifndef NO_32_BIT_TYPE
-		group->field_mod_func = BN_nist_mod_224;
-#else
-		ECerr(EC_F_EC_GFP_NIST_GROUP_SET_CURVE, EC_R_NOT_A_SUPPORTED_NIST_PRIME);
-		goto err;
-#endif
-		}
-	else if (BN_ucmp(BN_get0_nist_prime_256(), p) == 0)
-		{
-#ifndef NO_32_BIT_TYPE
-		group->field_mod_func = BN_nist_mod_256;
-#else
-		ECerr(EC_F_EC_GFP_NIST_GROUP_SET_CURVE, EC_R_NOT_A_SUPPORTED_NIST_PRIME);
-		goto err;
-#endif
-		}
-	else if (BN_ucmp(BN_get0_nist_prime_384(), p) == 0)
-		{
-#ifndef NO_32_BIT_TYPE
-		group->field_mod_func = BN_nist_mod_384;
-#else
-		ECerr(EC_F_EC_GFP_NIST_GROUP_SET_CURVE, EC_R_NOT_A_SUPPORTED_NIST_PRIME);
-		goto err;
-#endif
-		}
-	else if (BN_ucmp(BN_get0_nist_prime_521(), p) == 0)
-		/* this one works in the NO_32_BIT_TYPE case */
-		group->field_mod_func = BN_nist_mod_521;
-	else
-		{
-		ECerr(EC_F_EC_GFP_NIST_GROUP_SET_CURVE, EC_R_NOT_A_NIST_PRIME);
-		goto err;
-		}
-
-	ret = ec_GFp_simple_group_set_curve(group, p, a, b, ctx);
-
- err:
-	BN_CTX_end(ctx);
-	if (new_ctx != NULL)
-		BN_CTX_free(new_ctx);
-	return ret;
-	}
-
-
-int ec_GFp_nist_field_mul(const EC_GROUP *group, BIGNUM *r, const BIGNUM *a,
-	const BIGNUM *b, BN_CTX *ctx)
-	{
-	int	ret=0;
-	BN_CTX	*ctx_new=NULL;
-
-	if (!group || !r || !a || !b)
-		{
-		ECerr(EC_F_EC_GFP_NIST_FIELD_MUL, ERR_R_PASSED_NULL_PARAMETER);
-		goto err;
-		}
-	if (!ctx)
-		if ((ctx_new = ctx = BN_CTX_new()) == NULL) goto err;
-
-	if (!BN_mul(r, a, b, ctx)) goto err;
-	if (!group->field_mod_func(r, r, &group->field, ctx))
-		goto err;
-
-	ret=1;
-err:
-	if (ctx_new)
-		BN_CTX_free(ctx_new);
-	return ret;
-	}
-
-
-int ec_GFp_nist_field_sqr(const EC_GROUP *group, BIGNUM *r, const BIGNUM *a,
-	BN_CTX *ctx)
-	{
-	int	ret=0;
-	BN_CTX	*ctx_new=NULL;
-
-	if (!group || !r || !a)
-		{
-		ECerr(EC_F_EC_GFP_NIST_FIELD_SQR, EC_R_PASSED_NULL_PARAMETER);
-		goto err;
-		}
-	if (!ctx)
-		if ((ctx_new = ctx = BN_CTX_new()) == NULL) goto err;
-
-	if (!BN_sqr(r, a, ctx)) goto err;
-	if (!group->field_mod_func(r, r, &group->field, ctx))
-		goto err;
-
-	ret=1;
-err:
-	if (ctx_new)
-		BN_CTX_free(ctx_new);
-	return ret;
-	}
diff --git a/crypto/openssl/crypto/ec/ecp_recp.c b/crypto/openssl/crypto/ec/ecp_recp.c
deleted file mode 100644
index fec843b5c85b..000000000000
--- a/crypto/openssl/crypto/ec/ecp_recp.c
+++ /dev/null
@@ -1,133 +0,0 @@
-/* crypto/ec/ecp_recp.c */
-/* ====================================================================
- * Copyright (c) 1998-2001 The OpenSSL Project.  All rights reserved.
- *
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions
- * are met:
- *
- * 1. Redistributions of source code must retain the above copyright
- *    notice, this list of conditions and the following disclaimer. 
- *
- * 2. Redistributions in binary form must reproduce the above copyright
- *    notice, this list of conditions and the following disclaimer in
- *    the documentation and/or other materials provided with the
- *    distribution.
- *
- * 3. All advertising materials mentioning features or use of this
- *    software must display the following acknowledgment:
- *    "This product includes software developed by the OpenSSL Project
- *    for use in the OpenSSL Toolkit. (http://www.openssl.org/)"
- *
- * 4. The names "OpenSSL Toolkit" and "OpenSSL Project" must not be used to
- *    endorse or promote products derived from this software without
- *    prior written permission. For written permission, please contact
- *    openssl-core@openssl.org.
- *
- * 5. Products derived from this software may not be called "OpenSSL"
- *    nor may "OpenSSL" appear in their names without prior written
- *    permission of the OpenSSL Project.
- *
- * 6. Redistributions of any form whatsoever must retain the following
- *    acknowledgment:
- *    "This product includes software developed by the OpenSSL Project
- *    for use in the OpenSSL Toolkit (http://www.openssl.org/)"
- *
- * THIS SOFTWARE IS PROVIDED BY THE OpenSSL PROJECT ``AS IS'' AND ANY
- * EXPRESSED OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
- * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR
- * PURPOSE ARE DISCLAIMED.  IN NO EVENT SHALL THE OpenSSL PROJECT OR
- * ITS CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
- * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
- * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
- * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
- * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
- * STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
- * ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED
- * OF THE POSSIBILITY OF SUCH DAMAGE.
- * ====================================================================
- *
- * This product includes cryptographic software written by Eric Young
- * (eay@cryptsoft.com).  This product includes software written by Tim
- * Hudson (tjh@cryptsoft.com).
- *
- */
-
-#include "ec_lcl.h"
-
-#if 0
-const EC_METHOD *EC_GFp_recp_method(void)
-	{
-	static const EC_METHOD ret = {
-		ec_GFp_recp_group_init,
-		ec_GFp_recp_group_finish,
-		ec_GFp_recp_group_clear_finish,
-		ec_GFp_recp_group_copy,
-		ec_GFp_recp_group_set_curve_GFp,
-		ec_GFp_simple_group_get_curve_GFp,
-		ec_GFp_simple_group_set_generator,
-		ec_GFp_simple_group_get0_generator,
-		ec_GFp_simple_group_get_order,
-		ec_GFp_simple_group_get_cofactor,
-		ec_GFp_simple_point_init,
-		ec_GFp_simple_point_finish,
-		ec_GFp_simple_point_clear_finish,
-		ec_GFp_simple_point_copy,
-		ec_GFp_simple_point_set_to_infinity,
-		ec_GFp_simple_set_Jprojective_coordinates_GFp,
-		ec_GFp_simple_get_Jprojective_coordinates_GFp,
-		ec_GFp_simple_point_set_affine_coordinates_GFp,
-		ec_GFp_simple_point_get_affine_coordinates_GFp,
-		ec_GFp_simple_set_compressed_coordinates_GFp,
-		ec_GFp_simple_point2oct,
-		ec_GFp_simple_oct2point,
-		ec_GFp_simple_add,
-		ec_GFp_simple_dbl,
-		ec_GFp_simple_invert,
-		ec_GFp_simple_is_at_infinity,
-		ec_GFp_simple_is_on_curve,
-		ec_GFp_simple_cmp,
-		ec_GFp_simple_make_affine,
-		ec_GFp_simple_points_make_affine,
-		ec_GFp_recp_field_mul,
-		ec_GFp_recp_field_sqr,
-		0 /* field_encode */,
-		0 /* field_decode */,
-		0 /* field_set_to_one */ };
-
-	return &ret;
-	}
-#endif
-
-int ec_GFp_recp_group_init(EC_GROUP *group)
-	{
-	int ok;
-
-	ok = ec_GFp_simple_group_init(group);
-	group->field_data1 = NULL;
-	return ok;
-	}
-
-
-int ec_GFp_recp_group_set_curve_GFp(EC_GROUP *group, const BIGNUM *p, const BIGNUM *a, const BIGNUM *b, BN_CTX *ctx);
-/* TODO */
-
-
-void ec_GFp_recp_group_finish(EC_GROUP *group);
-/* TODO */
-
-
-void ec_GFp_recp_group_clear_finish(EC_GROUP *group);
-/* TODO */
-
-
-int ec_GFp_recp_group_copy(EC_GROUP *dest, const EC_GROUP *src);
-/* TODO */
-
-
-int ec_GFp_recp_field_mul(const EC_GROUP *group, BIGNUM *r, const BIGNUM *a, const BIGNUM *b, BN_CTX *ctx);
-/* TODO */
-
-
-int ec_GFp_recp_field_sqr(const EC_GROUP *group, BIGNUM *r, const BIGNUM *a, BN_CTX *ctx);
-/* TODO */
diff --git a/crypto/openssl/crypto/ec/ecp_smpl.c b/crypto/openssl/crypto/ec/ecp_smpl.c
deleted file mode 100644
index 4d26f8bdf692..000000000000
--- a/crypto/openssl/crypto/ec/ecp_smpl.c
+++ /dev/null
@@ -1,1716 +0,0 @@
-/* crypto/ec/ecp_smpl.c */
-/* Includes code written by Lenka Fibikova <fibikova@exp-math.uni-essen.de>
- * for the OpenSSL project. 
- * Includes code written by Bodo Moeller for the OpenSSL project.
-*/
-/* ====================================================================
- * Copyright (c) 1998-2002 The OpenSSL Project.  All rights reserved.
- *
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions
- * are met:
- *
- * 1. Redistributions of source code must retain the above copyright
- *    notice, this list of conditions and the following disclaimer. 
- *
- * 2. Redistributions in binary form must reproduce the above copyright
- *    notice, this list of conditions and the following disclaimer in
- *    the documentation and/or other materials provided with the
- *    distribution.
- *
- * 3. All advertising materials mentioning features or use of this
- *    software must display the following acknowledgment:
- *    "This product includes software developed by the OpenSSL Project
- *    for use in the OpenSSL Toolkit. (http://www.openssl.org/)"
- *
- * 4. The names "OpenSSL Toolkit" and "OpenSSL Project" must not be used to
- *    endorse or promote products derived from this software without
- *    prior written permission. For written permission, please contact
- *    openssl-core@openssl.org.
- *
- * 5. Products derived from this software may not be called "OpenSSL"
- *    nor may "OpenSSL" appear in their names without prior written
- *    permission of the OpenSSL Project.
- *
- * 6. Redistributions of any form whatsoever must retain the following
- *    acknowledgment:
- *    "This product includes software developed by the OpenSSL Project
- *    for use in the OpenSSL Toolkit (http://www.openssl.org/)"
- *
- * THIS SOFTWARE IS PROVIDED BY THE OpenSSL PROJECT ``AS IS'' AND ANY
- * EXPRESSED OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
- * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR
- * PURPOSE ARE DISCLAIMED.  IN NO EVENT SHALL THE OpenSSL PROJECT OR
- * ITS CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
- * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
- * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
- * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
- * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
- * STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
- * ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED
- * OF THE POSSIBILITY OF SUCH DAMAGE.
- * ====================================================================
- *
- * This product includes cryptographic software written by Eric Young
- * (eay@cryptsoft.com).  This product includes software written by Tim
- * Hudson (tjh@cryptsoft.com).
- *
- */
-/* ====================================================================
- * Copyright 2002 Sun Microsystems, Inc. ALL RIGHTS RESERVED.
- * Portions of this software developed by SUN MICROSYSTEMS, INC.,
- * and contributed to the OpenSSL project.
- */
-
-#include <openssl/err.h>
-#include <openssl/symhacks.h>
-
-#include "ec_lcl.h"
-
-const EC_METHOD *EC_GFp_simple_method(void)
-	{
-	static const EC_METHOD ret = {
-		NID_X9_62_prime_field,
-		ec_GFp_simple_group_init,
-		ec_GFp_simple_group_finish,
-		ec_GFp_simple_group_clear_finish,
-		ec_GFp_simple_group_copy,
-		ec_GFp_simple_group_set_curve,
-		ec_GFp_simple_group_get_curve,
-		ec_GFp_simple_group_get_degree,
-		ec_GFp_simple_group_check_discriminant,
-		ec_GFp_simple_point_init,
-		ec_GFp_simple_point_finish,
-		ec_GFp_simple_point_clear_finish,
-		ec_GFp_simple_point_copy,
-		ec_GFp_simple_point_set_to_infinity,
-		ec_GFp_simple_set_Jprojective_coordinates_GFp,
-		ec_GFp_simple_get_Jprojective_coordinates_GFp,
-		ec_GFp_simple_point_set_affine_coordinates,
-		ec_GFp_simple_point_get_affine_coordinates,
-		ec_GFp_simple_set_compressed_coordinates,
-		ec_GFp_simple_point2oct,
-		ec_GFp_simple_oct2point,
-		ec_GFp_simple_add,
-		ec_GFp_simple_dbl,
-		ec_GFp_simple_invert,
-		ec_GFp_simple_is_at_infinity,
-		ec_GFp_simple_is_on_curve,
-		ec_GFp_simple_cmp,
-		ec_GFp_simple_make_affine,
-		ec_GFp_simple_points_make_affine,
-		0 /* mul */,
-		0 /* precompute_mult */,
-		0 /* have_precompute_mult */,	
-		ec_GFp_simple_field_mul,
-		ec_GFp_simple_field_sqr,
-		0 /* field_div */,
-		0 /* field_encode */,
-		0 /* field_decode */,
-		0 /* field_set_to_one */ };
-
-	return &ret;
-	}
-
-
-/* Most method functions in this file are designed to work with
- * non-trivial representations of field elements if necessary
- * (see ecp_mont.c): while standard modular addition and subtraction
- * are used, the field_mul and field_sqr methods will be used for
- * multiplication, and field_encode and field_decode (if defined)
- * will be used for converting between representations.
-
- * Functions ec_GFp_simple_points_make_affine() and
- * ec_GFp_simple_point_get_affine_coordinates() specifically assume
- * that if a non-trivial representation is used, it is a Montgomery
- * representation (i.e. 'encoding' means multiplying by some factor R).
- */
-
-
-int ec_GFp_simple_group_init(EC_GROUP *group)
-	{
-	BN_init(&group->field);
-	BN_init(&group->a);
-	BN_init(&group->b);
-	group->a_is_minus3 = 0;
-	return 1;
-	}
-
-
-void ec_GFp_simple_group_finish(EC_GROUP *group)
-	{
-	BN_free(&group->field);
-	BN_free(&group->a);
-	BN_free(&group->b);
-	}
-
-
-void ec_GFp_simple_group_clear_finish(EC_GROUP *group)
-	{
-	BN_clear_free(&group->field);
-	BN_clear_free(&group->a);
-	BN_clear_free(&group->b);
-	}
-
-
-int ec_GFp_simple_group_copy(EC_GROUP *dest, const EC_GROUP *src)
-	{
-	if (!BN_copy(&dest->field, &src->field)) return 0;
-	if (!BN_copy(&dest->a, &src->a)) return 0;
-	if (!BN_copy(&dest->b, &src->b)) return 0;
-
-	dest->a_is_minus3 = src->a_is_minus3;
-
-	return 1;
-	}
-
-
-int ec_GFp_simple_group_set_curve(EC_GROUP *group,
-	const BIGNUM *p, const BIGNUM *a, const BIGNUM *b, BN_CTX *ctx)
-	{
-	int ret = 0;
-	BN_CTX *new_ctx = NULL;
-	BIGNUM *tmp_a;
-	
-	/* p must be a prime > 3 */
-	if (BN_num_bits(p) <= 2 || !BN_is_odd(p))
-		{
-		ECerr(EC_F_EC_GFP_SIMPLE_GROUP_SET_CURVE, EC_R_INVALID_FIELD);
-		return 0;
-		}
-
-	if (ctx == NULL)
-		{
-		ctx = new_ctx = BN_CTX_new();
-		if (ctx == NULL)
-			return 0;
-		}
-
-	BN_CTX_start(ctx);
-	tmp_a = BN_CTX_get(ctx);
-	if (tmp_a == NULL) goto err;
-
-	/* group->field */
-	if (!BN_copy(&group->field, p)) goto err;
-	BN_set_negative(&group->field, 0);
-
-	/* group->a */
-	if (!BN_nnmod(tmp_a, a, p, ctx)) goto err;
-	if (group->meth->field_encode)
-		{ if (!group->meth->field_encode(group, &group->a, tmp_a, ctx)) goto err; }	
-	else
-		if (!BN_copy(&group->a, tmp_a)) goto err;
-	
-	/* group->b */
-	if (!BN_nnmod(&group->b, b, p, ctx)) goto err;
-	if (group->meth->field_encode)
-		if (!group->meth->field_encode(group, &group->b, &group->b, ctx)) goto err;
-	
-	/* group->a_is_minus3 */
-	if (!BN_add_word(tmp_a, 3)) goto err;
-	group->a_is_minus3 = (0 == BN_cmp(tmp_a, &group->field));
-
-	ret = 1;
-
- err:
-	BN_CTX_end(ctx);
-	if (new_ctx != NULL)
-		BN_CTX_free(new_ctx);
-	return ret;
-	}
-
-
-int ec_GFp_simple_group_get_curve(const EC_GROUP *group, BIGNUM *p, BIGNUM *a, BIGNUM *b, BN_CTX *ctx)
-	{
-	int ret = 0;
-	BN_CTX *new_ctx = NULL;
-	
-	if (p != NULL)
-		{
-		if (!BN_copy(p, &group->field)) return 0;
-		}
-
-	if (a != NULL || b != NULL)
-		{
-		if (group->meth->field_decode)
-			{
-			if (ctx == NULL)
-				{
-				ctx = new_ctx = BN_CTX_new();
-				if (ctx == NULL)
-					return 0;
-				}
-			if (a != NULL)
-				{
-				if (!group->meth->field_decode(group, a, &group->a, ctx)) goto err;
-				}
-			if (b != NULL)
-				{
-				if (!group->meth->field_decode(group, b, &group->b, ctx)) goto err;
-				}
-			}
-		else
-			{
-			if (a != NULL)
-				{
-				if (!BN_copy(a, &group->a)) goto err;
-				}
-			if (b != NULL)
-				{
-				if (!BN_copy(b, &group->b)) goto err;
-				}
-			}
-		}
-	
-	ret = 1;
-	
- err:
-	if (new_ctx)
-		BN_CTX_free(new_ctx);
-	return ret;
-	}
-
-
-int ec_GFp_simple_group_get_degree(const EC_GROUP *group)
-	{
-	return BN_num_bits(&group->field);
-	}
-
-
-int ec_GFp_simple_group_check_discriminant(const EC_GROUP *group, BN_CTX *ctx)
-	{
-	int ret = 0;
-	BIGNUM *a,*b,*order,*tmp_1,*tmp_2;
-	const BIGNUM *p = &group->field;
-	BN_CTX *new_ctx = NULL;
-
-	if (ctx == NULL)
-		{
-		ctx = new_ctx = BN_CTX_new();
-		if (ctx == NULL)
-			{
-			ECerr(EC_F_EC_GFP_SIMPLE_GROUP_CHECK_DISCRIMINANT, ERR_R_MALLOC_FAILURE);
-			goto err;
-			}
-		}
-	BN_CTX_start(ctx);
-	a = BN_CTX_get(ctx);
-	b = BN_CTX_get(ctx);
-	tmp_1 = BN_CTX_get(ctx);
-	tmp_2 = BN_CTX_get(ctx);
-	order = BN_CTX_get(ctx);
-	if (order == NULL) goto err;
-
-	if (group->meth->field_decode)
-		{
-		if (!group->meth->field_decode(group, a, &group->a, ctx)) goto err;
-		if (!group->meth->field_decode(group, b, &group->b, ctx)) goto err;
-		}
-	else
-		{
-		if (!BN_copy(a, &group->a)) goto err;
-		if (!BN_copy(b, &group->b)) goto err;
-		}
-	
-	/* check the discriminant:
-	 * y^2 = x^3 + a*x + b is an elliptic curve <=> 4*a^3 + 27*b^2 != 0 (mod p) 
-         * 0 =< a, b < p */
-	if (BN_is_zero(a))
-		{
-		if (BN_is_zero(b)) goto err;
-		}
-	else if (!BN_is_zero(b))
-		{
-		if (!BN_mod_sqr(tmp_1, a, p, ctx)) goto err;
-		if (!BN_mod_mul(tmp_2, tmp_1, a, p, ctx)) goto err;
-		if (!BN_lshift(tmp_1, tmp_2, 2)) goto err;
-		/* tmp_1 = 4*a^3 */
-
-		if (!BN_mod_sqr(tmp_2, b, p, ctx)) goto err;
-		if (!BN_mul_word(tmp_2, 27)) goto err;
-		/* tmp_2 = 27*b^2 */
-
-		if (!BN_mod_add(a, tmp_1, tmp_2, p, ctx)) goto err;
-		if (BN_is_zero(a)) goto err;
-		}
-	ret = 1;
-
-err:
-	if (ctx != NULL)
-		BN_CTX_end(ctx);
-	if (new_ctx != NULL)
-		BN_CTX_free(new_ctx);
-	return ret;
-	}
-
-
-int ec_GFp_simple_point_init(EC_POINT *point)
-	{
-	BN_init(&point->X);
-	BN_init(&point->Y);
-	BN_init(&point->Z);
-	point->Z_is_one = 0;
-
-	return 1;
-	}
-
-
-void ec_GFp_simple_point_finish(EC_POINT *point)
-	{
-	BN_free(&point->X);
-	BN_free(&point->Y);
-	BN_free(&point->Z);
-	}
-
-
-void ec_GFp_simple_point_clear_finish(EC_POINT *point)
-	{
-	BN_clear_free(&point->X);
-	BN_clear_free(&point->Y);
-	BN_clear_free(&point->Z);
-	point->Z_is_one = 0;
-	}
-
-
-int ec_GFp_simple_point_copy(EC_POINT *dest, const EC_POINT *src)
-	{
-	if (!BN_copy(&dest->X, &src->X)) return 0;
-	if (!BN_copy(&dest->Y, &src->Y)) return 0;
-	if (!BN_copy(&dest->Z, &src->Z)) return 0;
-	dest->Z_is_one = src->Z_is_one;
-
-	return 1;
-	}
-
-
-int ec_GFp_simple_point_set_to_infinity(const EC_GROUP *group, EC_POINT *point)
-	{
-	point->Z_is_one = 0;
-	BN_zero(&point->Z);
-	return 1;
-	}
-
-
-int ec_GFp_simple_set_Jprojective_coordinates_GFp(const EC_GROUP *group, EC_POINT *point,
-	const BIGNUM *x, const BIGNUM *y, const BIGNUM *z, BN_CTX *ctx)
-	{
-	BN_CTX *new_ctx = NULL;
-	int ret = 0;
-	
-	if (ctx == NULL)
-		{
-		ctx = new_ctx = BN_CTX_new();
-		if (ctx == NULL)
-			return 0;
-		}
-
-	if (x != NULL)
-		{
-		if (!BN_nnmod(&point->X, x, &group->field, ctx)) goto err;
-		if (group->meth->field_encode)
-			{
-			if (!group->meth->field_encode(group, &point->X, &point->X, ctx)) goto err;
-			}
-		}
-	
-	if (y != NULL)
-		{
-		if (!BN_nnmod(&point->Y, y, &group->field, ctx)) goto err;
-		if (group->meth->field_encode)
-			{
-			if (!group->meth->field_encode(group, &point->Y, &point->Y, ctx)) goto err;
-			}
-		}
-	
-	if (z != NULL)
-		{
-		int Z_is_one;
-
-		if (!BN_nnmod(&point->Z, z, &group->field, ctx)) goto err;
-		Z_is_one = BN_is_one(&point->Z);
-		if (group->meth->field_encode)
-			{
-			if (Z_is_one && (group->meth->field_set_to_one != 0))
-				{
-				if (!group->meth->field_set_to_one(group, &point->Z, ctx)) goto err;
-				}
-			else
-				{
-				if (!group->meth->field_encode(group, &point->Z, &point->Z, ctx)) goto err;
-				}
-			}
-		point->Z_is_one = Z_is_one;
-		}
-	
-	ret = 1;
-	
- err:
-	if (new_ctx != NULL)
-		BN_CTX_free(new_ctx);
-	return ret;
-	}
-
-
-int ec_GFp_simple_get_Jprojective_coordinates_GFp(const EC_GROUP *group, const EC_POINT *point,
-	BIGNUM *x, BIGNUM *y, BIGNUM *z, BN_CTX *ctx)
-	{
-	BN_CTX *new_ctx = NULL;
-	int ret = 0;
-	
-	if (group->meth->field_decode != 0)
-		{
-		if (ctx == NULL)
-			{
-			ctx = new_ctx = BN_CTX_new();
-			if (ctx == NULL)
-				return 0;
-			}
-
-		if (x != NULL)
-			{
-			if (!group->meth->field_decode(group, x, &point->X, ctx)) goto err;
-			}
-		if (y != NULL)
-			{
-			if (!group->meth->field_decode(group, y, &point->Y, ctx)) goto err;
-			}
-		if (z != NULL)
-			{
-			if (!group->meth->field_decode(group, z, &point->Z, ctx)) goto err;
-			}
-		}
-	else	
-		{
-		if (x != NULL)
-			{
-			if (!BN_copy(x, &point->X)) goto err;
-			}
-		if (y != NULL)
-			{
-			if (!BN_copy(y, &point->Y)) goto err;
-			}
-		if (z != NULL)
-			{
-			if (!BN_copy(z, &point->Z)) goto err;
-			}
-		}
-	
-	ret = 1;
-
- err:
-	if (new_ctx != NULL)
-		BN_CTX_free(new_ctx);
-	return ret;
-	}
-
-
-int ec_GFp_simple_point_set_affine_coordinates(const EC_GROUP *group, EC_POINT *point,
-	const BIGNUM *x, const BIGNUM *y, BN_CTX *ctx)
-	{
-	if (x == NULL || y == NULL)
-		{
-		/* unlike for projective coordinates, we do not tolerate this */
-		ECerr(EC_F_EC_GFP_SIMPLE_POINT_SET_AFFINE_COORDINATES, ERR_R_PASSED_NULL_PARAMETER);
-		return 0;
-		}
-
-	return EC_POINT_set_Jprojective_coordinates_GFp(group, point, x, y, BN_value_one(), ctx);
-	}
-
-
-int ec_GFp_simple_point_get_affine_coordinates(const EC_GROUP *group, const EC_POINT *point,
-	BIGNUM *x, BIGNUM *y, BN_CTX *ctx)
-	{
-	BN_CTX *new_ctx = NULL;
-	BIGNUM *Z, *Z_1, *Z_2, *Z_3;
-	const BIGNUM *Z_;
-	int ret = 0;
-
-	if (EC_POINT_is_at_infinity(group, point))
-		{
-		ECerr(EC_F_EC_GFP_SIMPLE_POINT_GET_AFFINE_COORDINATES, EC_R_POINT_AT_INFINITY);
-		return 0;
-		}
-
-	if (ctx == NULL)
-		{
-		ctx = new_ctx = BN_CTX_new();
-		if (ctx == NULL)
-			return 0;
-		}
-
-	BN_CTX_start(ctx);
-	Z = BN_CTX_get(ctx);
-	Z_1 = BN_CTX_get(ctx);
-	Z_2 = BN_CTX_get(ctx);
-	Z_3 = BN_CTX_get(ctx);
-	if (Z_3 == NULL) goto err;
-
-	/* transform  (X, Y, Z)  into  (x, y) := (X/Z^2, Y/Z^3) */
-	
-	if (group->meth->field_decode)
-		{
-		if (!group->meth->field_decode(group, Z, &point->Z, ctx)) goto err;
-		Z_ = Z;
-		}
-	else
-		{
-		Z_ = &point->Z;
-		}
-	
-	if (BN_is_one(Z_))
-		{
-		if (group->meth->field_decode)
-			{
-			if (x != NULL)
-				{
-				if (!group->meth->field_decode(group, x, &point->X, ctx)) goto err;
-				}
-			if (y != NULL)
-				{
-				if (!group->meth->field_decode(group, y, &point->Y, ctx)) goto err;
-				}
-			}
-		else
-			{
-			if (x != NULL)
-				{
-				if (!BN_copy(x, &point->X)) goto err;
-				}
-			if (y != NULL)
-				{
-				if (!BN_copy(y, &point->Y)) goto err;
-				}
-			}
-		}
-	else
-		{
-		if (!BN_mod_inverse(Z_1, Z_, &group->field, ctx))
-			{
-			ECerr(EC_F_EC_GFP_SIMPLE_POINT_GET_AFFINE_COORDINATES, ERR_R_BN_LIB);
-			goto err;
-			}
-		
-		if (group->meth->field_encode == 0)
-			{
-			/* field_sqr works on standard representation */
-			if (!group->meth->field_sqr(group, Z_2, Z_1, ctx)) goto err;
-			}
-		else
-			{
-			if (!BN_mod_sqr(Z_2, Z_1, &group->field, ctx)) goto err;
-			}
-	
-		if (x != NULL)
-			{
-			/* in the Montgomery case, field_mul will cancel out Montgomery factor in X: */
-			if (!group->meth->field_mul(group, x, &point->X, Z_2, ctx)) goto err;
-			}
-
-		if (y != NULL)
-			{
-			if (group->meth->field_encode == 0)
-				{
-				/* field_mul works on standard representation */
-				if (!group->meth->field_mul(group, Z_3, Z_2, Z_1, ctx)) goto err;
-				}
-			else
-				{
-				if (!BN_mod_mul(Z_3, Z_2, Z_1, &group->field, ctx)) goto err;
-				}
-
-			/* in the Montgomery case, field_mul will cancel out Montgomery factor in Y: */
-			if (!group->meth->field_mul(group, y, &point->Y, Z_3, ctx)) goto err;
-			}
-		}
-
-	ret = 1;
-
- err:
-	BN_CTX_end(ctx);
-	if (new_ctx != NULL)
-		BN_CTX_free(new_ctx);
-	return ret;
-	}
-
-
-int ec_GFp_simple_set_compressed_coordinates(const EC_GROUP *group, EC_POINT *point,
-	const BIGNUM *x_, int y_bit, BN_CTX *ctx)
-	{
-	BN_CTX *new_ctx = NULL;
-	BIGNUM *tmp1, *tmp2, *x, *y;
-	int ret = 0;
-
-	/* clear error queue*/
-	ERR_clear_error();
-
-	if (ctx == NULL)
-		{
-		ctx = new_ctx = BN_CTX_new();
-		if (ctx == NULL)
-			return 0;
-		}
-
-	y_bit = (y_bit != 0);
-
-	BN_CTX_start(ctx);
-	tmp1 = BN_CTX_get(ctx);
-	tmp2 = BN_CTX_get(ctx);
-	x = BN_CTX_get(ctx);
-	y = BN_CTX_get(ctx);
-	if (y == NULL) goto err;
-
-	/* Recover y.  We have a Weierstrass equation
-	 *     y^2 = x^3 + a*x + b,
-	 * so  y  is one of the square roots of  x^3 + a*x + b.
-	 */
-
-	/* tmp1 := x^3 */
-	if (!BN_nnmod(x, x_, &group->field,ctx)) goto err;
-	if (group->meth->field_decode == 0)
-		{
-		/* field_{sqr,mul} work on standard representation */
-		if (!group->meth->field_sqr(group, tmp2, x_, ctx)) goto err;
-		if (!group->meth->field_mul(group, tmp1, tmp2, x_, ctx)) goto err;
-		}
-	else
-		{
-		if (!BN_mod_sqr(tmp2, x_, &group->field, ctx)) goto err;
-		if (!BN_mod_mul(tmp1, tmp2, x_, &group->field, ctx)) goto err;
-		}
-	
-	/* tmp1 := tmp1 + a*x */
-	if (group->a_is_minus3)
-		{
-		if (!BN_mod_lshift1_quick(tmp2, x, &group->field)) goto err;
-		if (!BN_mod_add_quick(tmp2, tmp2, x, &group->field)) goto err;
-		if (!BN_mod_sub_quick(tmp1, tmp1, tmp2, &group->field)) goto err;
-		}
-	else
-		{
-		if (group->meth->field_decode)
-			{
-			if (!group->meth->field_decode(group, tmp2, &group->a, ctx)) goto err;
-			if (!BN_mod_mul(tmp2, tmp2, x, &group->field, ctx)) goto err;
-			}
-		else
-			{
-			/* field_mul works on standard representation */
-			if (!group->meth->field_mul(group, tmp2, &group->a, x, ctx)) goto err;
-			}
-		
-		if (!BN_mod_add_quick(tmp1, tmp1, tmp2, &group->field)) goto err;
-		}
-	
-	/* tmp1 := tmp1 + b */
-	if (group->meth->field_decode)
-		{
-		if (!group->meth->field_decode(group, tmp2, &group->b, ctx)) goto err;
-		if (!BN_mod_add_quick(tmp1, tmp1, tmp2, &group->field)) goto err;
-		}
-	else
-		{
-		if (!BN_mod_add_quick(tmp1, tmp1, &group->b, &group->field)) goto err;
-		}
-	
-	if (!BN_mod_sqrt(y, tmp1, &group->field, ctx))
-		{
-		unsigned long err = ERR_peek_last_error();
-		
-		if (ERR_GET_LIB(err) == ERR_LIB_BN && ERR_GET_REASON(err) == BN_R_NOT_A_SQUARE)
-			{
-			ERR_clear_error();
-			ECerr(EC_F_EC_GFP_SIMPLE_SET_COMPRESSED_COORDINATES, EC_R_INVALID_COMPRESSED_POINT);
-			}
-		else
-			ECerr(EC_F_EC_GFP_SIMPLE_SET_COMPRESSED_COORDINATES, ERR_R_BN_LIB);
-		goto err;
-		}
-
-	if (y_bit != BN_is_odd(y))
-		{
-		if (BN_is_zero(y))
-			{
-			int kron;
-
-			kron = BN_kronecker(x, &group->field, ctx);
-			if (kron == -2) goto err;
-
-			if (kron == 1)
-				ECerr(EC_F_EC_GFP_SIMPLE_SET_COMPRESSED_COORDINATES, EC_R_INVALID_COMPRESSION_BIT);
-			else
-				/* BN_mod_sqrt() should have cought this error (not a square) */
-				ECerr(EC_F_EC_GFP_SIMPLE_SET_COMPRESSED_COORDINATES, EC_R_INVALID_COMPRESSED_POINT);
-			goto err;
-			}
-		if (!BN_usub(y, &group->field, y)) goto err;
-		}
-	if (y_bit != BN_is_odd(y))
-		{
-		ECerr(EC_F_EC_GFP_SIMPLE_SET_COMPRESSED_COORDINATES, ERR_R_INTERNAL_ERROR);
-		goto err;
-		}
-
-	if (!EC_POINT_set_affine_coordinates_GFp(group, point, x, y, ctx)) goto err;
-
-	ret = 1;
-
- err:
-	BN_CTX_end(ctx);
-	if (new_ctx != NULL)
-		BN_CTX_free(new_ctx);
-	return ret;
-	}
-
-
-size_t ec_GFp_simple_point2oct(const EC_GROUP *group, const EC_POINT *point, point_conversion_form_t form,
-	unsigned char *buf, size_t len, BN_CTX *ctx)
-	{
-	size_t ret;
-	BN_CTX *new_ctx = NULL;
-	int used_ctx = 0;
-	BIGNUM *x, *y;
-	size_t field_len, i, skip;
-
-	if ((form != POINT_CONVERSION_COMPRESSED)
-		&& (form != POINT_CONVERSION_UNCOMPRESSED)
-		&& (form != POINT_CONVERSION_HYBRID))
-		{
-		ECerr(EC_F_EC_GFP_SIMPLE_POINT2OCT, EC_R_INVALID_FORM);
-		goto err;
-		}
-
-	if (EC_POINT_is_at_infinity(group, point))
-		{
-		/* encodes to a single 0 octet */
-		if (buf != NULL)
-			{
-			if (len < 1)
-				{
-				ECerr(EC_F_EC_GFP_SIMPLE_POINT2OCT, EC_R_BUFFER_TOO_SMALL);
-				return 0;
-				}
-			buf[0] = 0;
-			}
-		return 1;
-		}
-
-
-	/* ret := required output buffer length */
-	field_len = BN_num_bytes(&group->field);
-	ret = (form == POINT_CONVERSION_COMPRESSED) ? 1 + field_len : 1 + 2*field_len;
-
-	/* if 'buf' is NULL, just return required length */
-	if (buf != NULL)
-		{
-		if (len < ret)
-			{
-			ECerr(EC_F_EC_GFP_SIMPLE_POINT2OCT, EC_R_BUFFER_TOO_SMALL);
-			goto err;
-			}
-
-		if (ctx == NULL)
-			{
-			ctx = new_ctx = BN_CTX_new();
-			if (ctx == NULL)
-				return 0;
-			}
-
-		BN_CTX_start(ctx);
-		used_ctx = 1;
-		x = BN_CTX_get(ctx);
-		y = BN_CTX_get(ctx);
-		if (y == NULL) goto err;
-
-		if (!EC_POINT_get_affine_coordinates_GFp(group, point, x, y, ctx)) goto err;
-
-		if ((form == POINT_CONVERSION_COMPRESSED || form == POINT_CONVERSION_HYBRID) && BN_is_odd(y))
-			buf[0] = form + 1;
-		else
-			buf[0] = form;
-	
-		i = 1;
-		
-		skip = field_len - BN_num_bytes(x);
-		if (skip > field_len)
-			{
-			ECerr(EC_F_EC_GFP_SIMPLE_POINT2OCT, ERR_R_INTERNAL_ERROR);
-			goto err;
-			}
-		while (skip > 0)
-			{
-			buf[i++] = 0;
-			skip--;
-			}
-		skip = BN_bn2bin(x, buf + i);
-		i += skip;
-		if (i != 1 + field_len)
-			{
-			ECerr(EC_F_EC_GFP_SIMPLE_POINT2OCT, ERR_R_INTERNAL_ERROR);
-			goto err;
-			}
-
-		if (form == POINT_CONVERSION_UNCOMPRESSED || form == POINT_CONVERSION_HYBRID)
-			{
-			skip = field_len - BN_num_bytes(y);
-			if (skip > field_len)
-				{
-				ECerr(EC_F_EC_GFP_SIMPLE_POINT2OCT, ERR_R_INTERNAL_ERROR);
-				goto err;
-				}
-			while (skip > 0)
-				{
-				buf[i++] = 0;
-				skip--;
-				}
-			skip = BN_bn2bin(y, buf + i);
-			i += skip;
-			}
-
-		if (i != ret)
-			{
-			ECerr(EC_F_EC_GFP_SIMPLE_POINT2OCT, ERR_R_INTERNAL_ERROR);
-			goto err;
-			}
-		}
-	
-	if (used_ctx)
-		BN_CTX_end(ctx);
-	if (new_ctx != NULL)
-		BN_CTX_free(new_ctx);
-	return ret;
-
- err:
-	if (used_ctx)
-		BN_CTX_end(ctx);
-	if (new_ctx != NULL)
-		BN_CTX_free(new_ctx);
-	return 0;
-	}
-
-
-int ec_GFp_simple_oct2point(const EC_GROUP *group, EC_POINT *point,
-	const unsigned char *buf, size_t len, BN_CTX *ctx)
-	{
-	point_conversion_form_t form;
-	int y_bit;
-	BN_CTX *new_ctx = NULL;
-	BIGNUM *x, *y;
-	size_t field_len, enc_len;
-	int ret = 0;
-
-	if (len == 0)
-		{
-		ECerr(EC_F_EC_GFP_SIMPLE_OCT2POINT, EC_R_BUFFER_TOO_SMALL);
-		return 0;
-		}
-	form = buf[0];
-	y_bit = form & 1;
-	form = form & ~1U;
-	if ((form != 0)	&& (form != POINT_CONVERSION_COMPRESSED)
-		&& (form != POINT_CONVERSION_UNCOMPRESSED)
-		&& (form != POINT_CONVERSION_HYBRID))
-		{
-		ECerr(EC_F_EC_GFP_SIMPLE_OCT2POINT, EC_R_INVALID_ENCODING);
-		return 0;
-		}
-	if ((form == 0 || form == POINT_CONVERSION_UNCOMPRESSED) && y_bit)
-		{
-		ECerr(EC_F_EC_GFP_SIMPLE_OCT2POINT, EC_R_INVALID_ENCODING);
-		return 0;
-		}
-
-	if (form == 0)
-		{
-		if (len != 1)
-			{
-			ECerr(EC_F_EC_GFP_SIMPLE_OCT2POINT, EC_R_INVALID_ENCODING);
-			return 0;
-			}
-
-		return EC_POINT_set_to_infinity(group, point);
-		}
-	
-	field_len = BN_num_bytes(&group->field);
-	enc_len = (form == POINT_CONVERSION_COMPRESSED) ? 1 + field_len : 1 + 2*field_len;
-
-	if (len != enc_len)
-		{
-		ECerr(EC_F_EC_GFP_SIMPLE_OCT2POINT, EC_R_INVALID_ENCODING);
-		return 0;
-		}
-
-	if (ctx == NULL)
-		{
-		ctx = new_ctx = BN_CTX_new();
-		if (ctx == NULL)
-			return 0;
-		}
-
-	BN_CTX_start(ctx);
-	x = BN_CTX_get(ctx);
-	y = BN_CTX_get(ctx);
-	if (y == NULL) goto err;
-
-	if (!BN_bin2bn(buf + 1, field_len, x)) goto err;
-	if (BN_ucmp(x, &group->field) >= 0)
-		{
-		ECerr(EC_F_EC_GFP_SIMPLE_OCT2POINT, EC_R_INVALID_ENCODING);
-		goto err;
-		}
-
-	if (form == POINT_CONVERSION_COMPRESSED)
-		{
-		if (!EC_POINT_set_compressed_coordinates_GFp(group, point, x, y_bit, ctx)) goto err;
-		}
-	else
-		{
-		if (!BN_bin2bn(buf + 1 + field_len, field_len, y)) goto err;
-		if (BN_ucmp(y, &group->field) >= 0)
-			{
-			ECerr(EC_F_EC_GFP_SIMPLE_OCT2POINT, EC_R_INVALID_ENCODING);
-			goto err;
-			}
-		if (form == POINT_CONVERSION_HYBRID)
-			{
-			if (y_bit != BN_is_odd(y))
-				{
-				ECerr(EC_F_EC_GFP_SIMPLE_OCT2POINT, EC_R_INVALID_ENCODING);
-				goto err;
-				}
-			}
-
-		if (!EC_POINT_set_affine_coordinates_GFp(group, point, x, y, ctx)) goto err;
-		}
-	
-	if (!EC_POINT_is_on_curve(group, point, ctx)) /* test required by X9.62 */
-		{
-		ECerr(EC_F_EC_GFP_SIMPLE_OCT2POINT, EC_R_POINT_IS_NOT_ON_CURVE);
-		goto err;
-		}
-
-	ret = 1;
-	
- err:
-	BN_CTX_end(ctx);
-	if (new_ctx != NULL)
-		BN_CTX_free(new_ctx);
-	return ret;
-	}
-
-
-int ec_GFp_simple_add(const EC_GROUP *group, EC_POINT *r, const EC_POINT *a, const EC_POINT *b, BN_CTX *ctx)
-	{
-	int (*field_mul)(const EC_GROUP *, BIGNUM *, const BIGNUM *, const BIGNUM *, BN_CTX *);
-	int (*field_sqr)(const EC_GROUP *, BIGNUM *, const BIGNUM *, BN_CTX *);
-	const BIGNUM *p;
-	BN_CTX *new_ctx = NULL;
-	BIGNUM *n0, *n1, *n2, *n3, *n4, *n5, *n6;
-	int ret = 0;
-	
-	if (a == b)
-		return EC_POINT_dbl(group, r, a, ctx);
-	if (EC_POINT_is_at_infinity(group, a))
-		return EC_POINT_copy(r, b);
-	if (EC_POINT_is_at_infinity(group, b))
-		return EC_POINT_copy(r, a);
-	
-	field_mul = group->meth->field_mul;
-	field_sqr = group->meth->field_sqr;
-	p = &group->field;
-
-	if (ctx == NULL)
-		{
-		ctx = new_ctx = BN_CTX_new();
-		if (ctx == NULL)
-			return 0;
-		}
-
-	BN_CTX_start(ctx);
-	n0 = BN_CTX_get(ctx);
-	n1 = BN_CTX_get(ctx);
-	n2 = BN_CTX_get(ctx);
-	n3 = BN_CTX_get(ctx);
-	n4 = BN_CTX_get(ctx);
-	n5 = BN_CTX_get(ctx);
-	n6 = BN_CTX_get(ctx);
-	if (n6 == NULL) goto end;
-
-	/* Note that in this function we must not read components of 'a' or 'b'
-	 * once we have written the corresponding components of 'r'.
-	 * ('r' might be one of 'a' or 'b'.)
-	 */
-
-	/* n1, n2 */
-	if (b->Z_is_one)
-		{
-		if (!BN_copy(n1, &a->X)) goto end;
-		if (!BN_copy(n2, &a->Y)) goto end;
-		/* n1 = X_a */
-		/* n2 = Y_a */
-		}
-	else
-		{
-		if (!field_sqr(group, n0, &b->Z, ctx)) goto end;
-		if (!field_mul(group, n1, &a->X, n0, ctx)) goto end;
-		/* n1 = X_a * Z_b^2 */
-
-		if (!field_mul(group, n0, n0, &b->Z, ctx)) goto end;
-		if (!field_mul(group, n2, &a->Y, n0, ctx)) goto end;
-		/* n2 = Y_a * Z_b^3 */
-		}
-
-	/* n3, n4 */
-	if (a->Z_is_one)
-		{
-		if (!BN_copy(n3, &b->X)) goto end;
-		if (!BN_copy(n4, &b->Y)) goto end;
-		/* n3 = X_b */
-		/* n4 = Y_b */
-		}
-	else
-		{
-		if (!field_sqr(group, n0, &a->Z, ctx)) goto end;
-		if (!field_mul(group, n3, &b->X, n0, ctx)) goto end;
-		/* n3 = X_b * Z_a^2 */
-
-		if (!field_mul(group, n0, n0, &a->Z, ctx)) goto end;
-		if (!field_mul(group, n4, &b->Y, n0, ctx)) goto end;
-		/* n4 = Y_b * Z_a^3 */
-		}
-
-	/* n5, n6 */
-	if (!BN_mod_sub_quick(n5, n1, n3, p)) goto end;
-	if (!BN_mod_sub_quick(n6, n2, n4, p)) goto end;
-	/* n5 = n1 - n3 */
-	/* n6 = n2 - n4 */
-
-	if (BN_is_zero(n5))
-		{
-		if (BN_is_zero(n6))
-			{
-			/* a is the same point as b */
-			BN_CTX_end(ctx);
-			ret = EC_POINT_dbl(group, r, a, ctx);
-			ctx = NULL;
-			goto end;
-			}
-		else
-			{
-			/* a is the inverse of b */
-			BN_zero(&r->Z);
-			r->Z_is_one = 0;
-			ret = 1;
-			goto end;
-			}
-		}
-
-	/* 'n7', 'n8' */
-	if (!BN_mod_add_quick(n1, n1, n3, p)) goto end;
-	if (!BN_mod_add_quick(n2, n2, n4, p)) goto end;
-	/* 'n7' = n1 + n3 */
-	/* 'n8' = n2 + n4 */
-
-	/* Z_r */
-	if (a->Z_is_one && b->Z_is_one)
-		{
-		if (!BN_copy(&r->Z, n5)) goto end;
-		}
-	else
-		{
-		if (a->Z_is_one)
-			{ if (!BN_copy(n0, &b->Z)) goto end; }
-		else if (b->Z_is_one)
-			{ if (!BN_copy(n0, &a->Z)) goto end; }
-		else
-			{ if (!field_mul(group, n0, &a->Z, &b->Z, ctx)) goto end; }
-		if (!field_mul(group, &r->Z, n0, n5, ctx)) goto end;
-		}
-	r->Z_is_one = 0;
-	/* Z_r = Z_a * Z_b * n5 */
-
-	/* X_r */
-	if (!field_sqr(group, n0, n6, ctx)) goto end;
-	if (!field_sqr(group, n4, n5, ctx)) goto end;
-	if (!field_mul(group, n3, n1, n4, ctx)) goto end;
-	if (!BN_mod_sub_quick(&r->X, n0, n3, p)) goto end;
-	/* X_r = n6^2 - n5^2 * 'n7' */
-	
-	/* 'n9' */
-	if (!BN_mod_lshift1_quick(n0, &r->X, p)) goto end;
-	if (!BN_mod_sub_quick(n0, n3, n0, p)) goto end;
-	/* n9 = n5^2 * 'n7' - 2 * X_r */
-
-	/* Y_r */
-	if (!field_mul(group, n0, n0, n6, ctx)) goto end;
-	if (!field_mul(group, n5, n4, n5, ctx)) goto end; /* now n5 is n5^3 */
-	if (!field_mul(group, n1, n2, n5, ctx)) goto end;
-	if (!BN_mod_sub_quick(n0, n0, n1, p)) goto end;
-	if (BN_is_odd(n0))
-		if (!BN_add(n0, n0, p)) goto end;
-	/* now  0 <= n0 < 2*p,  and n0 is even */
-	if (!BN_rshift1(&r->Y, n0)) goto end;
-	/* Y_r = (n6 * 'n9' - 'n8' * 'n5^3') / 2 */
-
-	ret = 1;
-
- end:
-	if (ctx) /* otherwise we already called BN_CTX_end */
-		BN_CTX_end(ctx);
-	if (new_ctx != NULL)
-		BN_CTX_free(new_ctx);
-	return ret;
-	}
-
-
-int ec_GFp_simple_dbl(const EC_GROUP *group, EC_POINT *r, const EC_POINT *a, BN_CTX *ctx)
-	{
-	int (*field_mul)(const EC_GROUP *, BIGNUM *, const BIGNUM *, const BIGNUM *, BN_CTX *);
-	int (*field_sqr)(const EC_GROUP *, BIGNUM *, const BIGNUM *, BN_CTX *);
-	const BIGNUM *p;
-	BN_CTX *new_ctx = NULL;
-	BIGNUM *n0, *n1, *n2, *n3;
-	int ret = 0;
-	
-	if (EC_POINT_is_at_infinity(group, a))
-		{
-		BN_zero(&r->Z);
-		r->Z_is_one = 0;
-		return 1;
-		}
-
-	field_mul = group->meth->field_mul;
-	field_sqr = group->meth->field_sqr;
-	p = &group->field;
-
-	if (ctx == NULL)
-		{
-		ctx = new_ctx = BN_CTX_new();
-		if (ctx == NULL)
-			return 0;
-		}
-
-	BN_CTX_start(ctx);
-	n0 = BN_CTX_get(ctx);
-	n1 = BN_CTX_get(ctx);
-	n2 = BN_CTX_get(ctx);
-	n3 = BN_CTX_get(ctx);
-	if (n3 == NULL) goto err;
-
-	/* Note that in this function we must not read components of 'a'
-	 * once we have written the corresponding components of 'r'.
-	 * ('r' might the same as 'a'.)
-	 */
-
-	/* n1 */
-	if (a->Z_is_one)
-		{
-		if (!field_sqr(group, n0, &a->X, ctx)) goto err;
-		if (!BN_mod_lshift1_quick(n1, n0, p)) goto err;
-		if (!BN_mod_add_quick(n0, n0, n1, p)) goto err;
-		if (!BN_mod_add_quick(n1, n0, &group->a, p)) goto err;
-		/* n1 = 3 * X_a^2 + a_curve */
-		}
-	else if (group->a_is_minus3)
-		{
-		if (!field_sqr(group, n1, &a->Z, ctx)) goto err;
-		if (!BN_mod_add_quick(n0, &a->X, n1, p)) goto err;
-		if (!BN_mod_sub_quick(n2, &a->X, n1, p)) goto err;
-		if (!field_mul(group, n1, n0, n2, ctx)) goto err;
-		if (!BN_mod_lshift1_quick(n0, n1, p)) goto err;
-		if (!BN_mod_add_quick(n1, n0, n1, p)) goto err;
-		/* n1 = 3 * (X_a + Z_a^2) * (X_a - Z_a^2)
-		 *    = 3 * X_a^2 - 3 * Z_a^4 */
-		}
-	else
-		{
-		if (!field_sqr(group, n0, &a->X, ctx)) goto err;
-		if (!BN_mod_lshift1_quick(n1, n0, p)) goto err;
-		if (!BN_mod_add_quick(n0, n0, n1, p)) goto err;
-		if (!field_sqr(group, n1, &a->Z, ctx)) goto err;
-		if (!field_sqr(group, n1, n1, ctx)) goto err;
-		if (!field_mul(group, n1, n1, &group->a, ctx)) goto err;
-		if (!BN_mod_add_quick(n1, n1, n0, p)) goto err;
-		/* n1 = 3 * X_a^2 + a_curve * Z_a^4 */
-		}
-
-	/* Z_r */
-	if (a->Z_is_one)
-		{
-		if (!BN_copy(n0, &a->Y)) goto err;
-		}
-	else
-		{
-		if (!field_mul(group, n0, &a->Y, &a->Z, ctx)) goto err;
-		}
-	if (!BN_mod_lshift1_quick(&r->Z, n0, p)) goto err;
-	r->Z_is_one = 0;
-	/* Z_r = 2 * Y_a * Z_a */
-
-	/* n2 */
-	if (!field_sqr(group, n3, &a->Y, ctx)) goto err;
-	if (!field_mul(group, n2, &a->X, n3, ctx)) goto err;
-	if (!BN_mod_lshift_quick(n2, n2, 2, p)) goto err;
-	/* n2 = 4 * X_a * Y_a^2 */
-
-	/* X_r */
-	if (!BN_mod_lshift1_quick(n0, n2, p)) goto err;
-	if (!field_sqr(group, &r->X, n1, ctx)) goto err;
-	if (!BN_mod_sub_quick(&r->X, &r->X, n0, p)) goto err;
-	/* X_r = n1^2 - 2 * n2 */
-	
-	/* n3 */
-	if (!field_sqr(group, n0, n3, ctx)) goto err;
-	if (!BN_mod_lshift_quick(n3, n0, 3, p)) goto err;
-	/* n3 = 8 * Y_a^4 */
-	
-	/* Y_r */
-	if (!BN_mod_sub_quick(n0, n2, &r->X, p)) goto err;
-	if (!field_mul(group, n0, n1, n0, ctx)) goto err;
-	if (!BN_mod_sub_quick(&r->Y, n0, n3, p)) goto err;
-	/* Y_r = n1 * (n2 - X_r) - n3 */
-
-	ret = 1;
-
- err:
-	BN_CTX_end(ctx);
-	if (new_ctx != NULL)
-		BN_CTX_free(new_ctx);
-	return ret;
-	}
-
-
-int ec_GFp_simple_invert(const EC_GROUP *group, EC_POINT *point, BN_CTX *ctx)
-	{
-	if (EC_POINT_is_at_infinity(group, point) || BN_is_zero(&point->Y))
-		/* point is its own inverse */
-		return 1;
-	
-	return BN_usub(&point->Y, &group->field, &point->Y);
-	}
-
-
-int ec_GFp_simple_is_at_infinity(const EC_GROUP *group, const EC_POINT *point)
-	{
-	return BN_is_zero(&point->Z);
-	}
-
-
-int ec_GFp_simple_is_on_curve(const EC_GROUP *group, const EC_POINT *point, BN_CTX *ctx)
-	{
-	int (*field_mul)(const EC_GROUP *, BIGNUM *, const BIGNUM *, const BIGNUM *, BN_CTX *);
-	int (*field_sqr)(const EC_GROUP *, BIGNUM *, const BIGNUM *, BN_CTX *);
-	const BIGNUM *p;
-	BN_CTX *new_ctx = NULL;
-	BIGNUM *rh, *tmp, *Z4, *Z6;
-	int ret = -1;
-
-	if (EC_POINT_is_at_infinity(group, point))
-		return 1;
-	
-	field_mul = group->meth->field_mul;
-	field_sqr = group->meth->field_sqr;
-	p = &group->field;
-
-	if (ctx == NULL)
-		{
-		ctx = new_ctx = BN_CTX_new();
-		if (ctx == NULL)
-			return -1;
-		}
-
-	BN_CTX_start(ctx);
-	rh = BN_CTX_get(ctx);
-	tmp = BN_CTX_get(ctx);
-	Z4 = BN_CTX_get(ctx);
-	Z6 = BN_CTX_get(ctx);
-	if (Z6 == NULL) goto err;
-
-	/* We have a curve defined by a Weierstrass equation
-	 *      y^2 = x^3 + a*x + b.
-	 * The point to consider is given in Jacobian projective coordinates
-	 * where  (X, Y, Z)  represents  (x, y) = (X/Z^2, Y/Z^3).
-	 * Substituting this and multiplying by  Z^6  transforms the above equation into
-	 *      Y^2 = X^3 + a*X*Z^4 + b*Z^6.
-	 * To test this, we add up the right-hand side in 'rh'.
-	 */
-
-	/* rh := X^2 */
-	if (!field_sqr(group, rh, &point->X, ctx)) goto err;
-
-	if (!point->Z_is_one)
-		{
-		if (!field_sqr(group, tmp, &point->Z, ctx)) goto err;
-		if (!field_sqr(group, Z4, tmp, ctx)) goto err;
-		if (!field_mul(group, Z6, Z4, tmp, ctx)) goto err;
-
-		/* rh := (rh + a*Z^4)*X */
-		if (group->a_is_minus3)
-			{
-			if (!BN_mod_lshift1_quick(tmp, Z4, p)) goto err;
-			if (!BN_mod_add_quick(tmp, tmp, Z4, p)) goto err;
-			if (!BN_mod_sub_quick(rh, rh, tmp, p)) goto err;
-			if (!field_mul(group, rh, rh, &point->X, ctx)) goto err;
-			}
-		else
-			{
-			if (!field_mul(group, tmp, Z4, &group->a, ctx)) goto err;
-			if (!BN_mod_add_quick(rh, rh, tmp, p)) goto err;
-			if (!field_mul(group, rh, rh, &point->X, ctx)) goto err;
-			}
-
-		/* rh := rh + b*Z^6 */
-		if (!field_mul(group, tmp, &group->b, Z6, ctx)) goto err;
-		if (!BN_mod_add_quick(rh, rh, tmp, p)) goto err;
-		}
-	else
-		{
-		/* point->Z_is_one */
-
-		/* rh := (rh + a)*X */
-		if (!BN_mod_add_quick(rh, rh, &group->a, p)) goto err;
-		if (!field_mul(group, rh, rh, &point->X, ctx)) goto err;
-		/* rh := rh + b */
-		if (!BN_mod_add_quick(rh, rh, &group->b, p)) goto err;
-		}
-
-	/* 'lh' := Y^2 */
-	if (!field_sqr(group, tmp, &point->Y, ctx)) goto err;
-
-	ret = (0 == BN_ucmp(tmp, rh));
-
- err:
-	BN_CTX_end(ctx);
-	if (new_ctx != NULL)
-		BN_CTX_free(new_ctx);
-	return ret;
-	}
-
-
-int ec_GFp_simple_cmp(const EC_GROUP *group, const EC_POINT *a, const EC_POINT *b, BN_CTX *ctx)
-	{
-	/* return values:
-	 *  -1   error
-	 *   0   equal (in affine coordinates)
-	 *   1   not equal
-	 */
-
-	int (*field_mul)(const EC_GROUP *, BIGNUM *, const BIGNUM *, const BIGNUM *, BN_CTX *);
-	int (*field_sqr)(const EC_GROUP *, BIGNUM *, const BIGNUM *, BN_CTX *);
-	BN_CTX *new_ctx = NULL;
-	BIGNUM *tmp1, *tmp2, *Za23, *Zb23;
-	const BIGNUM *tmp1_, *tmp2_;
-	int ret = -1;
-	
-	if (EC_POINT_is_at_infinity(group, a))
-		{
-		return EC_POINT_is_at_infinity(group, b) ? 0 : 1;
-		}
-	
-	if (a->Z_is_one && b->Z_is_one)
-		{
-		return ((BN_cmp(&a->X, &b->X) == 0) && BN_cmp(&a->Y, &b->Y) == 0) ? 0 : 1;
-		}
-
-	field_mul = group->meth->field_mul;
-	field_sqr = group->meth->field_sqr;
-
-	if (ctx == NULL)
-		{
-		ctx = new_ctx = BN_CTX_new();
-		if (ctx == NULL)
-			return -1;
-		}
-
-	BN_CTX_start(ctx);
-	tmp1 = BN_CTX_get(ctx);
-	tmp2 = BN_CTX_get(ctx);
-	Za23 = BN_CTX_get(ctx);
-	Zb23 = BN_CTX_get(ctx);
-	if (Zb23 == NULL) goto end;
-
-	/* We have to decide whether
-	 *     (X_a/Z_a^2, Y_a/Z_a^3) = (X_b/Z_b^2, Y_b/Z_b^3),
-	 * or equivalently, whether
-	 *     (X_a*Z_b^2, Y_a*Z_b^3) = (X_b*Z_a^2, Y_b*Z_a^3).
-	 */
-
-	if (!b->Z_is_one)
-		{
-		if (!field_sqr(group, Zb23, &b->Z, ctx)) goto end;
-		if (!field_mul(group, tmp1, &a->X, Zb23, ctx)) goto end;
-		tmp1_ = tmp1;
-		}
-	else
-		tmp1_ = &a->X;
-	if (!a->Z_is_one)
-		{
-		if (!field_sqr(group, Za23, &a->Z, ctx)) goto end;
-		if (!field_mul(group, tmp2, &b->X, Za23, ctx)) goto end;
-		tmp2_ = tmp2;
-		}
-	else
-		tmp2_ = &b->X;
-	
-	/* compare  X_a*Z_b^2  with  X_b*Z_a^2 */
-	if (BN_cmp(tmp1_, tmp2_) != 0)
-		{
-		ret = 1; /* points differ */
-		goto end;
-		}
-
-
-	if (!b->Z_is_one)
-		{
-		if (!field_mul(group, Zb23, Zb23, &b->Z, ctx)) goto end;
-		if (!field_mul(group, tmp1, &a->Y, Zb23, ctx)) goto end;
-		/* tmp1_ = tmp1 */
-		}
-	else
-		tmp1_ = &a->Y;
-	if (!a->Z_is_one)
-		{
-		if (!field_mul(group, Za23, Za23, &a->Z, ctx)) goto end;
-		if (!field_mul(group, tmp2, &b->Y, Za23, ctx)) goto end;
-		/* tmp2_ = tmp2 */
-		}
-	else
-		tmp2_ = &b->Y;
-
-	/* compare  Y_a*Z_b^3  with  Y_b*Z_a^3 */
-	if (BN_cmp(tmp1_, tmp2_) != 0)
-		{
-		ret = 1; /* points differ */
-		goto end;
-		}
-
-	/* points are equal */
-	ret = 0;
-
- end:
-	BN_CTX_end(ctx);
-	if (new_ctx != NULL)
-		BN_CTX_free(new_ctx);
-	return ret;
-	}
-
-
-int ec_GFp_simple_make_affine(const EC_GROUP *group, EC_POINT *point, BN_CTX *ctx)
-	{
-	BN_CTX *new_ctx = NULL;
-	BIGNUM *x, *y;
-	int ret = 0;
-
-	if (point->Z_is_one || EC_POINT_is_at_infinity(group, point))
-		return 1;
-
-	if (ctx == NULL)
-		{
-		ctx = new_ctx = BN_CTX_new();
-		if (ctx == NULL)
-			return 0;
-		}
-
-	BN_CTX_start(ctx);
-	x = BN_CTX_get(ctx);
-	y = BN_CTX_get(ctx);
-	if (y == NULL) goto err;
-
-	if (!EC_POINT_get_affine_coordinates_GFp(group, point, x, y, ctx)) goto err;
-	if (!EC_POINT_set_affine_coordinates_GFp(group, point, x, y, ctx)) goto err;
-	if (!point->Z_is_one)
-		{
-		ECerr(EC_F_EC_GFP_SIMPLE_MAKE_AFFINE, ERR_R_INTERNAL_ERROR);
-		goto err;
-		}
-	
-	ret = 1;
-
- err:
-	BN_CTX_end(ctx);
-	if (new_ctx != NULL)
-		BN_CTX_free(new_ctx);
-	return ret;
-	}
-
-
-int ec_GFp_simple_points_make_affine(const EC_GROUP *group, size_t num, EC_POINT *points[], BN_CTX *ctx)
-	{
-	BN_CTX *new_ctx = NULL;
-	BIGNUM *tmp0, *tmp1;
-	size_t pow2 = 0;
-	BIGNUM **heap = NULL;
-	size_t i;
-	int ret = 0;
-
-	if (num == 0)
-		return 1;
-
-	if (ctx == NULL)
-		{
-		ctx = new_ctx = BN_CTX_new();
-		if (ctx == NULL)
-			return 0;
-		}
-
-	BN_CTX_start(ctx);
-	tmp0 = BN_CTX_get(ctx);
-	tmp1 = BN_CTX_get(ctx);
-	if (tmp0  == NULL || tmp1 == NULL) goto err;
-
-	/* Before converting the individual points, compute inverses of all Z values.
-	 * Modular inversion is rather slow, but luckily we can do with a single
-	 * explicit inversion, plus about 3 multiplications per input value.
-	 */
-
-	pow2 = 1;
-	while (num > pow2)
-		pow2 <<= 1;
-	/* Now pow2 is the smallest power of 2 satifsying pow2 >= num.
-	 * We need twice that. */
-	pow2 <<= 1;
-
-	heap = OPENSSL_malloc(pow2 * sizeof heap[0]);
-	if (heap == NULL) goto err;
-	
-	/* The array is used as a binary tree, exactly as in heapsort:
-	 *
-	 *                               heap[1]
-	 *                 heap[2]                     heap[3]
-	 *          heap[4]       heap[5]       heap[6]       heap[7]
-	 *   heap[8]heap[9] heap[10]heap[11] heap[12]heap[13] heap[14] heap[15]
-	 *
-	 * We put the Z's in the last line;
-	 * then we set each other node to the product of its two child-nodes (where
-	 * empty or 0 entries are treated as ones);
-	 * then we invert heap[1];
-	 * then we invert each other node by replacing it by the product of its
-	 * parent (after inversion) and its sibling (before inversion).
-	 */
-	heap[0] = NULL;
-	for (i = pow2/2 - 1; i > 0; i--)
-		heap[i] = NULL;
-	for (i = 0; i < num; i++)
-		heap[pow2/2 + i] = &points[i]->Z;
-	for (i = pow2/2 + num; i < pow2; i++)
-		heap[i] = NULL;
-	
-	/* set each node to the product of its children */
-	for (i = pow2/2 - 1; i > 0; i--)
-		{
-		heap[i] = BN_new();
-		if (heap[i] == NULL) goto err;
-		
-		if (heap[2*i] != NULL)
-			{
-			if ((heap[2*i + 1] == NULL) || BN_is_zero(heap[2*i + 1]))
-				{
-				if (!BN_copy(heap[i], heap[2*i])) goto err;
-				}
-			else
-				{
-				if (BN_is_zero(heap[2*i]))
-					{
-					if (!BN_copy(heap[i], heap[2*i + 1])) goto err;
-					}
-				else
-					{
-					if (!group->meth->field_mul(group, heap[i],
-						heap[2*i], heap[2*i + 1], ctx)) goto err;
-					}
-				}
-			}
-		}
-
-	/* invert heap[1] */
-	if (!BN_is_zero(heap[1]))
-		{
-		if (!BN_mod_inverse(heap[1], heap[1], &group->field, ctx))
-			{
-			ECerr(EC_F_EC_GFP_SIMPLE_POINTS_MAKE_AFFINE, ERR_R_BN_LIB);
-			goto err;
-			}
-		}
-	if (group->meth->field_encode != 0)
-		{
-		/* in the Montgomery case, we just turned  R*H  (representing H)
-		 * into  1/(R*H),  but we need  R*(1/H)  (representing 1/H);
-		 * i.e. we have need to multiply by the Montgomery factor twice */
-		if (!group->meth->field_encode(group, heap[1], heap[1], ctx)) goto err;
-		if (!group->meth->field_encode(group, heap[1], heap[1], ctx)) goto err;
-		}
-
-	/* set other heap[i]'s to their inverses */
-	for (i = 2; i < pow2/2 + num; i += 2)
-		{
-		/* i is even */
-		if ((heap[i + 1] != NULL) && !BN_is_zero(heap[i + 1]))
-			{
-			if (!group->meth->field_mul(group, tmp0, heap[i/2], heap[i + 1], ctx)) goto err;
-			if (!group->meth->field_mul(group, tmp1, heap[i/2], heap[i], ctx)) goto err;
-			if (!BN_copy(heap[i], tmp0)) goto err;
-			if (!BN_copy(heap[i + 1], tmp1)) goto err;
-			}
-		else
-			{
-			if (!BN_copy(heap[i], heap[i/2])) goto err;
-			}
-		}
-
-	/* we have replaced all non-zero Z's by their inverses, now fix up all the points */
-	for (i = 0; i < num; i++)
-		{
-		EC_POINT *p = points[i];
-		
-		if (!BN_is_zero(&p->Z))
-			{
-			/* turn  (X, Y, 1/Z)  into  (X/Z^2, Y/Z^3, 1) */
-
-			if (!group->meth->field_sqr(group, tmp1, &p->Z, ctx)) goto err;
-			if (!group->meth->field_mul(group, &p->X, &p->X, tmp1, ctx)) goto err;
-
-			if (!group->meth->field_mul(group, tmp1, tmp1, &p->Z, ctx)) goto err;
-			if (!group->meth->field_mul(group, &p->Y, &p->Y, tmp1, ctx)) goto err;
-		
-			if (group->meth->field_set_to_one != 0)
-				{
-				if (!group->meth->field_set_to_one(group, &p->Z, ctx)) goto err;
-				}
-			else
-				{
-				if (!BN_one(&p->Z)) goto err;
-				}
-			p->Z_is_one = 1;
-			}
-		}
-
-	ret = 1;
-		
- err:
-	BN_CTX_end(ctx);
-	if (new_ctx != NULL)
-		BN_CTX_free(new_ctx);
-	if (heap != NULL)
-		{
-		/* heap[pow2/2] .. heap[pow2-1] have not been allocated locally! */
-		for (i = pow2/2 - 1; i > 0; i--)
-			{
-			if (heap[i] != NULL)
-				BN_clear_free(heap[i]);
-			}
-		OPENSSL_free(heap);
-		}
-	return ret;
-	}
-
-
-int ec_GFp_simple_field_mul(const EC_GROUP *group, BIGNUM *r, const BIGNUM *a, const BIGNUM *b, BN_CTX *ctx)
-	{
-	return BN_mod_mul(r, a, b, &group->field, ctx);
-	}
-
-
-int ec_GFp_simple_field_sqr(const EC_GROUP *group, BIGNUM *r, const BIGNUM *a, BN_CTX *ctx)
-	{
-	return BN_mod_sqr(r, a, &group->field, ctx);
-	}
diff --git a/crypto/openssl/crypto/ec/ectest.c b/crypto/openssl/crypto/ec/ectest.c
deleted file mode 100644
index 9d469f1cfab4..000000000000
--- a/crypto/openssl/crypto/ec/ectest.c
+++ /dev/null
@@ -1,1336 +0,0 @@
-/* crypto/ec/ectest.c */
-/*
- * Originally written by Bodo Moeller for the OpenSSL project.
- */
-/* ====================================================================
- * Copyright (c) 1998-2001 The OpenSSL Project.  All rights reserved.
- *
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions
- * are met:
- *
- * 1. Redistributions of source code must retain the above copyright
- *    notice, this list of conditions and the following disclaimer. 
- *
- * 2. Redistributions in binary form must reproduce the above copyright
- *    notice, this list of conditions and the following disclaimer in
- *    the documentation and/or other materials provided with the
- *    distribution.
- *
- * 3. All advertising materials mentioning features or use of this
- *    software must display the following acknowledgment:
- *    "This product includes software developed by the OpenSSL Project
- *    for use in the OpenSSL Toolkit. (http://www.openssl.org/)"
- *
- * 4. The names "OpenSSL Toolkit" and "OpenSSL Project" must not be used to
- *    endorse or promote products derived from this software without
- *    prior written permission. For written permission, please contact
- *    openssl-core@openssl.org.
- *
- * 5. Products derived from this software may not be called "OpenSSL"
- *    nor may "OpenSSL" appear in their names without prior written
- *    permission of the OpenSSL Project.
- *
- * 6. Redistributions of any form whatsoever must retain the following
- *    acknowledgment:
- *    "This product includes software developed by the OpenSSL Project
- *    for use in the OpenSSL Toolkit (http://www.openssl.org/)"
- *
- * THIS SOFTWARE IS PROVIDED BY THE OpenSSL PROJECT ``AS IS'' AND ANY
- * EXPRESSED OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
- * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR
- * PURPOSE ARE DISCLAIMED.  IN NO EVENT SHALL THE OpenSSL PROJECT OR
- * ITS CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
- * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
- * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
- * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
- * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
- * STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
- * ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED
- * OF THE POSSIBILITY OF SUCH DAMAGE.
- * ====================================================================
- *
- * This product includes cryptographic software written by Eric Young
- * (eay@cryptsoft.com).  This product includes software written by Tim
- * Hudson (tjh@cryptsoft.com).
- *
- */
-/* ====================================================================
- * Copyright 2002 Sun Microsystems, Inc. ALL RIGHTS RESERVED.
- *
- * Portions of the attached software ("Contribution") are developed by 
- * SUN MICROSYSTEMS, INC., and are contributed to the OpenSSL project.
- *
- * The Contribution is licensed pursuant to the OpenSSL open source
- * license provided above.
- *
- * The elliptic curve binary polynomial software is originally written by 
- * Sheueling Chang Shantz and Douglas Stebila of Sun Microsystems Laboratories.
- *
- */
-
-#include <stdio.h>
-#include <stdlib.h>
-#ifdef FLAT_INC
-#include "e_os.h"
-#else
-#include "../e_os.h"
-#endif
-#include <string.h>
-#include <time.h>
-
-
-#ifdef OPENSSL_NO_EC
-int main(int argc, char * argv[]) { puts("Elliptic curves are disabled."); return 0; }
-#else
-
-
-#include <openssl/ec.h>
-#ifndef OPENSSL_NO_ENGINE
-#include <openssl/engine.h>
-#endif
-#include <openssl/err.h>
-#include <openssl/obj_mac.h>
-#include <openssl/objects.h>
-#include <openssl/rand.h>
-#include <openssl/bn.h>
-
-#if defined(_MSC_VER) && defined(_MIPS_) && (_MSC_VER/100==12)
-/* suppress "too big too optimize" warning */
-#pragma warning(disable:4959)
-#endif
-
-#define ABORT do { \
-	fflush(stdout); \
-	fprintf(stderr, "%s:%d: ABORT\n", __FILE__, __LINE__); \
-	ERR_print_errors_fp(stderr); \
-	EXIT(1); \
-} while (0)
-
-void prime_field_tests(void);
-void char2_field_tests(void);
-void internal_curve_test(void);
-
-#define TIMING_BASE_PT 0
-#define TIMING_RAND_PT 1
-#define TIMING_SIMUL 2
-
-#if 0
-static void timings(EC_GROUP *group, int type, BN_CTX *ctx)
-	{
-	clock_t clck;
-	int i, j;
-	BIGNUM *s;
-	BIGNUM *r[10], *r0[10];
-	EC_POINT *P;
-		
-	s = BN_new();
-	if (s == NULL) ABORT;
-
-	fprintf(stdout, "Timings for %d-bit field, ", EC_GROUP_get_degree(group));
-	if (!EC_GROUP_get_order(group, s, ctx)) ABORT;
-	fprintf(stdout, "%d-bit scalars ", (int)BN_num_bits(s));
-	fflush(stdout);
-
-	P = EC_POINT_new(group);
-	if (P == NULL) ABORT;
-	EC_POINT_copy(P, EC_GROUP_get0_generator(group));
-
-	for (i = 0; i < 10; i++)
-		{
-		if ((r[i] = BN_new()) == NULL) ABORT;
-		if (!BN_pseudo_rand(r[i], BN_num_bits(s), 0, 0)) ABORT;
-		if (type != TIMING_BASE_PT)
-			{
-			if ((r0[i] = BN_new()) == NULL) ABORT;
-			if (!BN_pseudo_rand(r0[i], BN_num_bits(s), 0, 0)) ABORT;
-			}
-		}
-
-	clck = clock();
-	for (i = 0; i < 10; i++)
-		{
-		for (j = 0; j < 10; j++)
-			{
-			if (!EC_POINT_mul(group, P, (type != TIMING_RAND_PT) ? r[i] : NULL, 
-				(type != TIMING_BASE_PT) ? P : NULL, (type != TIMING_BASE_PT) ? r0[i] : NULL, ctx)) ABORT;
-			}
-		}
-	clck = clock() - clck;
-
-	fprintf(stdout, "\n");
-
-#ifdef CLOCKS_PER_SEC
-	/* "To determine the time in seconds, the value returned
-	 * by the clock function should be divided by the value
-	 * of the macro CLOCKS_PER_SEC."
-	 *                                       -- ISO/IEC 9899 */
-#	define UNIT "s"
-#else
-	/* "`CLOCKS_PER_SEC' undeclared (first use this function)"
-	 *                            -- cc on NeXTstep/OpenStep */
-#	define UNIT "units"
-#	define CLOCKS_PER_SEC 1
-#endif
-
-	if (type == TIMING_BASE_PT) {
-		fprintf(stdout, "%i %s in %.2f " UNIT "\n", i*j,
-			"base point multiplications", (double)clck/CLOCKS_PER_SEC);
-	} else if (type == TIMING_RAND_PT) {
-		fprintf(stdout, "%i %s in %.2f " UNIT "\n", i*j,
-			"random point multiplications", (double)clck/CLOCKS_PER_SEC);
-	} else if (type == TIMING_SIMUL) {
-		fprintf(stdout, "%i %s in %.2f " UNIT "\n", i*j,
-			"s*P+t*Q operations", (double)clck/CLOCKS_PER_SEC);
-	}
-	fprintf(stdout, "average: %.4f " UNIT "\n", (double)clck/(CLOCKS_PER_SEC*i*j));
-
-	EC_POINT_free(P);
-	BN_free(s);
-	for (i = 0; i < 10; i++)
-		{
-		BN_free(r[i]);
-		if (type != TIMING_BASE_PT) BN_free(r0[i]);
-		}
-	}
-#endif
-
-void prime_field_tests()
-	{	
-	BN_CTX *ctx = NULL;
-	BIGNUM *p, *a, *b;
-	EC_GROUP *group;
-	EC_GROUP *P_160 = NULL, *P_192 = NULL, *P_224 = NULL, *P_256 = NULL, *P_384 = NULL, *P_521 = NULL;
-	EC_POINT *P, *Q, *R;
-	BIGNUM *x, *y, *z;
-	unsigned char buf[100];
-	size_t i, len;
-	int k;
-	
-#if 1 /* optional */
-	ctx = BN_CTX_new();
-	if (!ctx) ABORT;
-#endif
-
-	p = BN_new();
-	a = BN_new();
-	b = BN_new();
-	if (!p || !a || !b) ABORT;
-
-	if (!BN_hex2bn(&p, "17")) ABORT;
-	if (!BN_hex2bn(&a, "1")) ABORT;
-	if (!BN_hex2bn(&b, "1")) ABORT;
-	
-	group = EC_GROUP_new(EC_GFp_mont_method()); /* applications should use EC_GROUP_new_curve_GFp
-	                                             * so that the library gets to choose the EC_METHOD */
-	if (!group) ABORT;
-
-	if (!EC_GROUP_set_curve_GFp(group, p, a, b, ctx)) ABORT;
-
-	{
-		EC_GROUP *tmp;
-		tmp = EC_GROUP_new(EC_GROUP_method_of(group));
-		if (!tmp) ABORT;
-		if (!EC_GROUP_copy(tmp, group)) ABORT;
-		EC_GROUP_free(group);
-		group = tmp;
-	}
-	
-	if (!EC_GROUP_get_curve_GFp(group, p, a, b, ctx)) ABORT;
-
-	fprintf(stdout, "Curve defined by Weierstrass equation\n     y^2 = x^3 + a*x + b  (mod 0x");
-	BN_print_fp(stdout, p);
-	fprintf(stdout, ")\n     a = 0x");
-	BN_print_fp(stdout, a);
-	fprintf(stdout, "\n     b = 0x");
-	BN_print_fp(stdout, b);
-	fprintf(stdout, "\n");
-
-	P = EC_POINT_new(group);
-	Q = EC_POINT_new(group);
-	R = EC_POINT_new(group);
-	if (!P || !Q || !R) ABORT;
-	
-	if (!EC_POINT_set_to_infinity(group, P)) ABORT;
-	if (!EC_POINT_is_at_infinity(group, P)) ABORT;
-
-	buf[0] = 0;
-	if (!EC_POINT_oct2point(group, Q, buf, 1, ctx)) ABORT;
-
-	if (!EC_POINT_add(group, P, P, Q, ctx)) ABORT;
-	if (!EC_POINT_is_at_infinity(group, P)) ABORT;
-
-	x = BN_new();
-	y = BN_new();
-	z = BN_new();
-	if (!x || !y || !z) ABORT;
-
-	if (!BN_hex2bn(&x, "D")) ABORT;
-	if (!EC_POINT_set_compressed_coordinates_GFp(group, Q, x, 1, ctx)) ABORT;
-	if (!EC_POINT_is_on_curve(group, Q, ctx))
-		{
-		if (!EC_POINT_get_affine_coordinates_GFp(group, Q, x, y, ctx)) ABORT;
-		fprintf(stderr, "Point is not on curve: x = 0x");
-		BN_print_fp(stderr, x);
-		fprintf(stderr, ", y = 0x");
-		BN_print_fp(stderr, y);
-		fprintf(stderr, "\n");
-		ABORT;
-		}
-
-	fprintf(stdout, "A cyclic subgroup:\n");
-	k = 100;
-	do
-		{
-		if (k-- == 0) ABORT;
-
-		if (EC_POINT_is_at_infinity(group, P))
-			fprintf(stdout, "     point at infinity\n");
-		else
-			{
-			if (!EC_POINT_get_affine_coordinates_GFp(group, P, x, y, ctx)) ABORT;
-
-			fprintf(stdout, "     x = 0x");
-			BN_print_fp(stdout, x);
-			fprintf(stdout, ", y = 0x");
-			BN_print_fp(stdout, y);
-			fprintf(stdout, "\n");
-			}
-		
-		if (!EC_POINT_copy(R, P)) ABORT;
-		if (!EC_POINT_add(group, P, P, Q, ctx)) ABORT;
-
-#if 0 /* optional */
-		{
-			EC_POINT *points[3];
-		
-			points[0] = R;
-			points[1] = Q;
-			points[2] = P;
-			if (!EC_POINTs_make_affine(group, 2, points, ctx)) ABORT;
-		}
-#endif
-
-		}
-	while (!EC_POINT_is_at_infinity(group, P));
-
-	if (!EC_POINT_add(group, P, Q, R, ctx)) ABORT;
-	if (!EC_POINT_is_at_infinity(group, P)) ABORT;
-
-	len = EC_POINT_point2oct(group, Q, POINT_CONVERSION_COMPRESSED, buf, sizeof buf, ctx);
-	if (len == 0) ABORT;
-	if (!EC_POINT_oct2point(group, P, buf, len, ctx)) ABORT;
-	if (0 != EC_POINT_cmp(group, P, Q, ctx)) ABORT;
-	fprintf(stdout, "Generator as octect string, compressed form:\n     ");
-	for (i = 0; i < len; i++) fprintf(stdout, "%02X", buf[i]);
-	
-	len = EC_POINT_point2oct(group, Q, POINT_CONVERSION_UNCOMPRESSED, buf, sizeof buf, ctx);
-	if (len == 0) ABORT;
-	if (!EC_POINT_oct2point(group, P, buf, len, ctx)) ABORT;
-	if (0 != EC_POINT_cmp(group, P, Q, ctx)) ABORT;
-	fprintf(stdout, "\nGenerator as octect string, uncompressed form:\n     ");
-	for (i = 0; i < len; i++) fprintf(stdout, "%02X", buf[i]);
-	
-	len = EC_POINT_point2oct(group, Q, POINT_CONVERSION_HYBRID, buf, sizeof buf, ctx);
-	if (len == 0) ABORT;
-	if (!EC_POINT_oct2point(group, P, buf, len, ctx)) ABORT;
-	if (0 != EC_POINT_cmp(group, P, Q, ctx)) ABORT;
-	fprintf(stdout, "\nGenerator as octect string, hybrid form:\n     ");
-	for (i = 0; i < len; i++) fprintf(stdout, "%02X", buf[i]);
-	
-	if (!EC_POINT_get_Jprojective_coordinates_GFp(group, R, x, y, z, ctx)) ABORT;
-	fprintf(stdout, "\nA representation of the inverse of that generator in\nJacobian projective coordinates:\n     X = 0x");
-	BN_print_fp(stdout, x);
-	fprintf(stdout, ", Y = 0x");
-	BN_print_fp(stdout, y);
-	fprintf(stdout, ", Z = 0x");
-	BN_print_fp(stdout, z);
-	fprintf(stdout, "\n");
-
-	if (!EC_POINT_invert(group, P, ctx)) ABORT;
-	if (0 != EC_POINT_cmp(group, P, R, ctx)) ABORT;
-
-
-	/* Curve secp160r1 (Certicom Research SEC 2 Version 1.0, section 2.4.2, 2000)
-	 * -- not a NIST curve, but commonly used */
-	
-	if (!BN_hex2bn(&p, "FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF7FFFFFFF")) ABORT;
-	if (1 != BN_is_prime_ex(p, BN_prime_checks, ctx, NULL)) ABORT;
-	if (!BN_hex2bn(&a, "FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF7FFFFFFC")) ABORT;
-	if (!BN_hex2bn(&b, "1C97BEFC54BD7A8B65ACF89F81D4D4ADC565FA45")) ABORT;
-	if (!EC_GROUP_set_curve_GFp(group, p, a, b, ctx)) ABORT;
-
-	if (!BN_hex2bn(&x, "4A96B5688EF573284664698968C38BB913CBFC82")) ABORT;
-	if (!BN_hex2bn(&y, "23a628553168947d59dcc912042351377ac5fb32")) ABORT;
-	if (!EC_POINT_set_affine_coordinates_GFp(group, P, x, y, ctx)) ABORT;
-	if (!EC_POINT_is_on_curve(group, P, ctx)) ABORT;
-	if (!BN_hex2bn(&z, "0100000000000000000001F4C8F927AED3CA752257")) ABORT;
-	if (!EC_GROUP_set_generator(group, P, z, BN_value_one())) ABORT;
-
-	if (!EC_POINT_get_affine_coordinates_GFp(group, P, x, y, ctx)) ABORT;
-	fprintf(stdout, "\nSEC2 curve secp160r1 -- Generator:\n     x = 0x");
-	BN_print_fp(stdout, x);
-	fprintf(stdout, "\n     y = 0x");
-	BN_print_fp(stdout, y);
-	fprintf(stdout, "\n");
-	/* G_y value taken from the standard: */
-	if (!BN_hex2bn(&z, "23a628553168947d59dcc912042351377ac5fb32")) ABORT;
-	if (0 != BN_cmp(y, z)) ABORT;
-
-	fprintf(stdout, "verify degree ...");
-	if (EC_GROUP_get_degree(group) != 160) ABORT;
-	fprintf(stdout, " ok\n");
-	
-	fprintf(stdout, "verify group order ...");
-	fflush(stdout);
-	if (!EC_GROUP_get_order(group, z, ctx)) ABORT;
-	if (!EC_POINT_mul(group, Q, z, NULL, NULL, ctx)) ABORT;
-	if (!EC_POINT_is_at_infinity(group, Q)) ABORT;
-	fprintf(stdout, ".");
-	fflush(stdout);
-	if (!EC_GROUP_precompute_mult(group, ctx)) ABORT;
-	if (!EC_POINT_mul(group, Q, z, NULL, NULL, ctx)) ABORT;
-	if (!EC_POINT_is_at_infinity(group, Q)) ABORT;
-	fprintf(stdout, " ok\n");
-
-	if (!(P_160 = EC_GROUP_new(EC_GROUP_method_of(group)))) ABORT;
-	if (!EC_GROUP_copy(P_160, group)) ABORT;
-
-
-	/* Curve P-192 (FIPS PUB 186-2, App. 6) */
-	
-	if (!BN_hex2bn(&p, "FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFEFFFFFFFFFFFFFFFF")) ABORT;
-	if (1 != BN_is_prime_ex(p, BN_prime_checks, ctx, NULL)) ABORT;
-	if (!BN_hex2bn(&a, "FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFEFFFFFFFFFFFFFFFC")) ABORT;
-	if (!BN_hex2bn(&b, "64210519E59C80E70FA7E9AB72243049FEB8DEECC146B9B1")) ABORT;
-	if (!EC_GROUP_set_curve_GFp(group, p, a, b, ctx)) ABORT;
-
-	if (!BN_hex2bn(&x, "188DA80EB03090F67CBF20EB43A18800F4FF0AFD82FF1012")) ABORT;
-	if (!EC_POINT_set_compressed_coordinates_GFp(group, P, x, 1, ctx)) ABORT;
-	if (!EC_POINT_is_on_curve(group, P, ctx)) ABORT;
-	if (!BN_hex2bn(&z, "FFFFFFFFFFFFFFFFFFFFFFFF99DEF836146BC9B1B4D22831")) ABORT;
-	if (!EC_GROUP_set_generator(group, P, z, BN_value_one())) ABORT;
-
-	if (!EC_POINT_get_affine_coordinates_GFp(group, P, x, y, ctx)) ABORT;
-	fprintf(stdout, "\nNIST curve P-192 -- Generator:\n     x = 0x");
-	BN_print_fp(stdout, x);
-	fprintf(stdout, "\n     y = 0x");
-	BN_print_fp(stdout, y);
-	fprintf(stdout, "\n");
-	/* G_y value taken from the standard: */
-	if (!BN_hex2bn(&z, "07192B95FFC8DA78631011ED6B24CDD573F977A11E794811")) ABORT;
-	if (0 != BN_cmp(y, z)) ABORT;
-
-	fprintf(stdout, "verify degree ...");
-	if (EC_GROUP_get_degree(group) != 192) ABORT;
-	fprintf(stdout, " ok\n");
-	
-	fprintf(stdout, "verify group order ...");
-	fflush(stdout);
-	if (!EC_GROUP_get_order(group, z, ctx)) ABORT;
-	if (!EC_POINT_mul(group, Q, z, NULL, NULL, ctx)) ABORT;
-	if (!EC_POINT_is_at_infinity(group, Q)) ABORT;
-	fprintf(stdout, ".");
-	fflush(stdout);
-#if 0
-	if (!EC_GROUP_precompute_mult(group, ctx)) ABORT;
-#endif
-	if (!EC_POINT_mul(group, Q, z, NULL, NULL, ctx)) ABORT;
-	if (!EC_POINT_is_at_infinity(group, Q)) ABORT;
-	fprintf(stdout, " ok\n");
-
-	if (!(P_192 = EC_GROUP_new(EC_GROUP_method_of(group)))) ABORT;
-	if (!EC_GROUP_copy(P_192, group)) ABORT;
-
-
-	/* Curve P-224 (FIPS PUB 186-2, App. 6) */
-	
-	if (!BN_hex2bn(&p, "FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF000000000000000000000001")) ABORT;
-	if (1 != BN_is_prime_ex(p, BN_prime_checks, ctx, NULL)) ABORT;
-	if (!BN_hex2bn(&a, "FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFEFFFFFFFFFFFFFFFFFFFFFFFE")) ABORT;
-	if (!BN_hex2bn(&b, "B4050A850C04B3ABF54132565044B0B7D7BFD8BA270B39432355FFB4")) ABORT;
-	if (!EC_GROUP_set_curve_GFp(group, p, a, b, ctx)) ABORT;
-
-	if (!BN_hex2bn(&x, "B70E0CBD6BB4BF7F321390B94A03C1D356C21122343280D6115C1D21")) ABORT;
-	if (!EC_POINT_set_compressed_coordinates_GFp(group, P, x, 0, ctx)) ABORT;
-	if (!EC_POINT_is_on_curve(group, P, ctx)) ABORT;
-	if (!BN_hex2bn(&z, "FFFFFFFFFFFFFFFFFFFFFFFFFFFF16A2E0B8F03E13DD29455C5C2A3D")) ABORT;
-	if (!EC_GROUP_set_generator(group, P, z, BN_value_one())) ABORT;
-
-	if (!EC_POINT_get_affine_coordinates_GFp(group, P, x, y, ctx)) ABORT;
-	fprintf(stdout, "\nNIST curve P-224 -- Generator:\n     x = 0x");
-	BN_print_fp(stdout, x);
-	fprintf(stdout, "\n     y = 0x");
-	BN_print_fp(stdout, y);
-	fprintf(stdout, "\n");
-	/* G_y value taken from the standard: */
-	if (!BN_hex2bn(&z, "BD376388B5F723FB4C22DFE6CD4375A05A07476444D5819985007E34")) ABORT;
-	if (0 != BN_cmp(y, z)) ABORT;
-	
-	fprintf(stdout, "verify degree ...");
-	if (EC_GROUP_get_degree(group) != 224) ABORT;
-	fprintf(stdout, " ok\n");
-	
-	fprintf(stdout, "verify group order ...");
-	fflush(stdout);
-	if (!EC_GROUP_get_order(group, z, ctx)) ABORT;
-	if (!EC_POINT_mul(group, Q, z, NULL, NULL, ctx)) ABORT;
-	if (!EC_POINT_is_at_infinity(group, Q)) ABORT;
-	fprintf(stdout, ".");
-	fflush(stdout);
-#if 0
-	if (!EC_GROUP_precompute_mult(group, ctx)) ABORT;
-#endif
-	if (!EC_POINT_mul(group, Q, z, NULL, NULL, ctx)) ABORT;
-	if (!EC_POINT_is_at_infinity(group, Q)) ABORT;
-	fprintf(stdout, " ok\n");
-
-	if (!(P_224 = EC_GROUP_new(EC_GROUP_method_of(group)))) ABORT;
-	if (!EC_GROUP_copy(P_224, group)) ABORT;
-
-
-	/* Curve P-256 (FIPS PUB 186-2, App. 6) */
-	
-	if (!BN_hex2bn(&p, "FFFFFFFF00000001000000000000000000000000FFFFFFFFFFFFFFFFFFFFFFFF")) ABORT;
-	if (1 != BN_is_prime_ex(p, BN_prime_checks, ctx, NULL)) ABORT;
-	if (!BN_hex2bn(&a, "FFFFFFFF00000001000000000000000000000000FFFFFFFFFFFFFFFFFFFFFFFC")) ABORT;
-	if (!BN_hex2bn(&b, "5AC635D8AA3A93E7B3EBBD55769886BC651D06B0CC53B0F63BCE3C3E27D2604B")) ABORT;
-	if (!EC_GROUP_set_curve_GFp(group, p, a, b, ctx)) ABORT;
-
-	if (!BN_hex2bn(&x, "6B17D1F2E12C4247F8BCE6E563A440F277037D812DEB33A0F4A13945D898C296")) ABORT;
-	if (!EC_POINT_set_compressed_coordinates_GFp(group, P, x, 1, ctx)) ABORT;
-	if (!EC_POINT_is_on_curve(group, P, ctx)) ABORT;
-	if (!BN_hex2bn(&z, "FFFFFFFF00000000FFFFFFFFFFFFFFFFBCE6FAADA7179E"
-		"84F3B9CAC2FC632551")) ABORT;
-	if (!EC_GROUP_set_generator(group, P, z, BN_value_one())) ABORT;
-
-	if (!EC_POINT_get_affine_coordinates_GFp(group, P, x, y, ctx)) ABORT;
-	fprintf(stdout, "\nNIST curve P-256 -- Generator:\n     x = 0x");
-	BN_print_fp(stdout, x);
-	fprintf(stdout, "\n     y = 0x");
-	BN_print_fp(stdout, y);
-	fprintf(stdout, "\n");
-	/* G_y value taken from the standard: */
-	if (!BN_hex2bn(&z, "4FE342E2FE1A7F9B8EE7EB4A7C0F9E162BCE33576B315ECECBB6406837BF51F5")) ABORT;
-	if (0 != BN_cmp(y, z)) ABORT;
-	
-	fprintf(stdout, "verify degree ...");
-	if (EC_GROUP_get_degree(group) != 256) ABORT;
-	fprintf(stdout, " ok\n");
-	
-	fprintf(stdout, "verify group order ...");
-	fflush(stdout);
-	if (!EC_GROUP_get_order(group, z, ctx)) ABORT;
-	if (!EC_POINT_mul(group, Q, z, NULL, NULL, ctx)) ABORT;
-	if (!EC_POINT_is_at_infinity(group, Q)) ABORT;
-	fprintf(stdout, ".");
-	fflush(stdout);
-#if 0
-	if (!EC_GROUP_precompute_mult(group, ctx)) ABORT;
-#endif
-	if (!EC_POINT_mul(group, Q, z, NULL, NULL, ctx)) ABORT;
-	if (!EC_POINT_is_at_infinity(group, Q)) ABORT;
-	fprintf(stdout, " ok\n");
-
-	if (!(P_256 = EC_GROUP_new(EC_GROUP_method_of(group)))) ABORT;
-	if (!EC_GROUP_copy(P_256, group)) ABORT;
-
-
-	/* Curve P-384 (FIPS PUB 186-2, App. 6) */
-	
-	if (!BN_hex2bn(&p, "FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF"
-		"FFFFFFFFFFFFFFFFFEFFFFFFFF0000000000000000FFFFFFFF")) ABORT;
-	if (1 != BN_is_prime_ex(p, BN_prime_checks, ctx, NULL)) ABORT;
-	if (!BN_hex2bn(&a, "FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF"
-		"FFFFFFFFFFFFFFFFFEFFFFFFFF0000000000000000FFFFFFFC")) ABORT;
-	if (!BN_hex2bn(&b, "B3312FA7E23EE7E4988E056BE3F82D19181D9C6EFE8141"
-		"120314088F5013875AC656398D8A2ED19D2A85C8EDD3EC2AEF")) ABORT;
-	if (!EC_GROUP_set_curve_GFp(group, p, a, b, ctx)) ABORT;
-
-	if (!BN_hex2bn(&x, "AA87CA22BE8B05378EB1C71EF320AD746E1D3B628BA79B"
-		"9859F741E082542A385502F25DBF55296C3A545E3872760AB7")) ABORT;
-	if (!EC_POINT_set_compressed_coordinates_GFp(group, P, x, 1, ctx)) ABORT;
-	if (!EC_POINT_is_on_curve(group, P, ctx)) ABORT;
-	if (!BN_hex2bn(&z, "FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF"
-		"FFC7634D81F4372DDF581A0DB248B0A77AECEC196ACCC52973")) ABORT;
-	if (!EC_GROUP_set_generator(group, P, z, BN_value_one())) ABORT;
-
-	if (!EC_POINT_get_affine_coordinates_GFp(group, P, x, y, ctx)) ABORT;
-	fprintf(stdout, "\nNIST curve P-384 -- Generator:\n     x = 0x");
-	BN_print_fp(stdout, x);
-	fprintf(stdout, "\n     y = 0x");
-	BN_print_fp(stdout, y);
-	fprintf(stdout, "\n");
-	/* G_y value taken from the standard: */
-	if (!BN_hex2bn(&z, "3617DE4A96262C6F5D9E98BF9292DC29F8F41DBD289A14"
-		"7CE9DA3113B5F0B8C00A60B1CE1D7E819D7A431D7C90EA0E5F")) ABORT;
-	if (0 != BN_cmp(y, z)) ABORT;
-	
-	fprintf(stdout, "verify degree ...");
-	if (EC_GROUP_get_degree(group) != 384) ABORT;
-	fprintf(stdout, " ok\n");
-	
-	fprintf(stdout, "verify group order ...");
-	fflush(stdout);
-	if (!EC_GROUP_get_order(group, z, ctx)) ABORT;
-	if (!EC_POINT_mul(group, Q, z, NULL, NULL, ctx)) ABORT;
-	if (!EC_POINT_is_at_infinity(group, Q)) ABORT;
-	fprintf(stdout, ".");
-	fflush(stdout);
-#if 0
-	if (!EC_GROUP_precompute_mult(group, ctx)) ABORT;
-#endif
-	if (!EC_POINT_mul(group, Q, z, NULL, NULL, ctx)) ABORT;
-	if (!EC_POINT_is_at_infinity(group, Q)) ABORT;
-	fprintf(stdout, " ok\n");
-
-	if (!(P_384 = EC_GROUP_new(EC_GROUP_method_of(group)))) ABORT;
-	if (!EC_GROUP_copy(P_384, group)) ABORT;
-
-
-	/* Curve P-521 (FIPS PUB 186-2, App. 6) */
-	
-	if (!BN_hex2bn(&p, "1FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF"
-		"FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF"
-		"FFFFFFFFFFFFFFFFFFFFFFFFFFFF")) ABORT;
-	if (1 != BN_is_prime_ex(p, BN_prime_checks, ctx, NULL)) ABORT;
-	if (!BN_hex2bn(&a, "1FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF"
-		"FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF"
-		"FFFFFFFFFFFFFFFFFFFFFFFFFFFC")) ABORT;
-	if (!BN_hex2bn(&b, "051953EB9618E1C9A1F929A21A0B68540EEA2DA725B99B"
-		"315F3B8B489918EF109E156193951EC7E937B1652C0BD3BB1BF073573"
-		"DF883D2C34F1EF451FD46B503F00")) ABORT;
-	if (!EC_GROUP_set_curve_GFp(group, p, a, b, ctx)) ABORT;
-
-	if (!BN_hex2bn(&x, "C6858E06B70404E9CD9E3ECB662395B4429C648139053F"
-		"B521F828AF606B4D3DBAA14B5E77EFE75928FE1DC127A2FFA8DE3348B"
-		"3C1856A429BF97E7E31C2E5BD66")) ABORT;
-	if (!EC_POINT_set_compressed_coordinates_GFp(group, P, x, 0, ctx)) ABORT;
-	if (!EC_POINT_is_on_curve(group, P, ctx)) ABORT;
-	if (!BN_hex2bn(&z, "1FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF"
-		"FFFFFFFFFFFFFFFFFFFFA51868783BF2F966B7FCC0148F709A5D03BB5"
-		"C9B8899C47AEBB6FB71E91386409")) ABORT;
-	if (!EC_GROUP_set_generator(group, P, z, BN_value_one())) ABORT;
-
-	if (!EC_POINT_get_affine_coordinates_GFp(group, P, x, y, ctx)) ABORT;
-	fprintf(stdout, "\nNIST curve P-521 -- Generator:\n     x = 0x");
-	BN_print_fp(stdout, x);
-	fprintf(stdout, "\n     y = 0x");
-	BN_print_fp(stdout, y);
-	fprintf(stdout, "\n");
-	/* G_y value taken from the standard: */
-	if (!BN_hex2bn(&z, "11839296A789A3BC0045C8A5FB42C7D1BD998F54449579"
-		"B446817AFBD17273E662C97EE72995EF42640C550B9013FAD0761353C"
-		"7086A272C24088BE94769FD16650")) ABORT;
-	if (0 != BN_cmp(y, z)) ABORT;
-	
-	fprintf(stdout, "verify degree ...");
-	if (EC_GROUP_get_degree(group) != 521) ABORT;
-	fprintf(stdout, " ok\n");
-	
-	fprintf(stdout, "verify group order ...");
-	fflush(stdout);
-	if (!EC_GROUP_get_order(group, z, ctx)) ABORT;
-	if (!EC_POINT_mul(group, Q, z, NULL, NULL, ctx)) ABORT;
-	if (!EC_POINT_is_at_infinity(group, Q)) ABORT;
-	fprintf(stdout, ".");
-	fflush(stdout);
-#if 0
-	if (!EC_GROUP_precompute_mult(group, ctx)) ABORT;
-#endif
-	if (!EC_POINT_mul(group, Q, z, NULL, NULL, ctx)) ABORT;
-	if (!EC_POINT_is_at_infinity(group, Q)) ABORT;
-	fprintf(stdout, " ok\n");
-
-	if (!(P_521 = EC_GROUP_new(EC_GROUP_method_of(group)))) ABORT;
-	if (!EC_GROUP_copy(P_521, group)) ABORT;
-
-
-	/* more tests using the last curve */
-
-	if (!EC_POINT_copy(Q, P)) ABORT;
-	if (EC_POINT_is_at_infinity(group, Q)) ABORT;
-	if (!EC_POINT_dbl(group, P, P, ctx)) ABORT;
-	if (!EC_POINT_is_on_curve(group, P, ctx)) ABORT;
-	if (!EC_POINT_invert(group, Q, ctx)) ABORT; /* P = -2Q */
-
-	if (!EC_POINT_add(group, R, P, Q, ctx)) ABORT;
-	if (!EC_POINT_add(group, R, R, Q, ctx)) ABORT;
-	if (!EC_POINT_is_at_infinity(group, R)) ABORT; /* R = P + 2Q */
-
-	{
-		const EC_POINT *points[3];
-		const BIGNUM *scalars[3];
-	
-		if (EC_POINT_is_at_infinity(group, Q)) ABORT;
-		points[0] = Q;
-		points[1] = Q;
-		points[2] = Q;
-
-		if (!BN_add(y, z, BN_value_one())) ABORT;
-		if (BN_is_odd(y)) ABORT;
-		if (!BN_rshift1(y, y)) ABORT;
-		scalars[0] = y; /* (group order + 1)/2,  so  y*Q + y*Q = Q */
-		scalars[1] = y;
-
-		fprintf(stdout, "combined multiplication ...");
-		fflush(stdout);
-
-		/* z is still the group order */
-		if (!EC_POINTs_mul(group, P, NULL, 2, points, scalars, ctx)) ABORT;
-		if (!EC_POINTs_mul(group, R, z, 2, points, scalars, ctx)) ABORT;
-		if (0 != EC_POINT_cmp(group, P, R, ctx)) ABORT;
-		if (0 != EC_POINT_cmp(group, R, Q, ctx)) ABORT;
-
-		fprintf(stdout, ".");
-		fflush(stdout);
-
-		if (!BN_pseudo_rand(y, BN_num_bits(y), 0, 0)) ABORT;
-		if (!BN_add(z, z, y)) ABORT;
-		BN_set_negative(z, 1);
-		scalars[0] = y;
-		scalars[1] = z; /* z = -(order + y) */
-
-		if (!EC_POINTs_mul(group, P, NULL, 2, points, scalars, ctx)) ABORT;
-		if (!EC_POINT_is_at_infinity(group, P)) ABORT;
-
-		fprintf(stdout, ".");
-		fflush(stdout);
-
-		if (!BN_pseudo_rand(x, BN_num_bits(y) - 1, 0, 0)) ABORT;
-		if (!BN_add(z, x, y)) ABORT;
-		BN_set_negative(z, 1);
-		scalars[0] = x;
-		scalars[1] = y;
-		scalars[2] = z; /* z = -(x+y) */
-
-		if (!EC_POINTs_mul(group, P, NULL, 3, points, scalars, ctx)) ABORT;
-		if (!EC_POINT_is_at_infinity(group, P)) ABORT;
-
-		fprintf(stdout, " ok\n\n");
-	}
-
-
-#if 0
-	timings(P_160, TIMING_BASE_PT, ctx);
-	timings(P_160, TIMING_RAND_PT, ctx);
-	timings(P_160, TIMING_SIMUL, ctx);
-	timings(P_192, TIMING_BASE_PT, ctx);
-	timings(P_192, TIMING_RAND_PT, ctx);
-	timings(P_192, TIMING_SIMUL, ctx);
-	timings(P_224, TIMING_BASE_PT, ctx);
-	timings(P_224, TIMING_RAND_PT, ctx);
-	timings(P_224, TIMING_SIMUL, ctx);
-	timings(P_256, TIMING_BASE_PT, ctx);
-	timings(P_256, TIMING_RAND_PT, ctx);
-	timings(P_256, TIMING_SIMUL, ctx);
-	timings(P_384, TIMING_BASE_PT, ctx);
-	timings(P_384, TIMING_RAND_PT, ctx);
-	timings(P_384, TIMING_SIMUL, ctx);
-	timings(P_521, TIMING_BASE_PT, ctx);
-	timings(P_521, TIMING_RAND_PT, ctx);
-	timings(P_521, TIMING_SIMUL, ctx);
-#endif
-
-
-	if (ctx)
-		BN_CTX_free(ctx);
-	BN_free(p); BN_free(a);	BN_free(b);
-	EC_GROUP_free(group);
-	EC_POINT_free(P);
-	EC_POINT_free(Q);
-	EC_POINT_free(R);
-	BN_free(x); BN_free(y); BN_free(z);
-
-	if (P_160) EC_GROUP_free(P_160);
-	if (P_192) EC_GROUP_free(P_192);
-	if (P_224) EC_GROUP_free(P_224);
-	if (P_256) EC_GROUP_free(P_256);
-	if (P_384) EC_GROUP_free(P_384);
-	if (P_521) EC_GROUP_free(P_521);
-
-	}
-
-/* Change test based on whether binary point compression is enabled or not. */
-#ifdef OPENSSL_EC_BIN_PT_COMP
-#define CHAR2_CURVE_TEST_INTERNAL(_name, _p, _a, _b, _x, _y, _y_bit, _order, _cof, _degree, _variable) \
-	if (!BN_hex2bn(&x, _x)) ABORT; \
-	if (!EC_POINT_set_compressed_coordinates_GF2m(group, P, x, _y_bit, ctx)) ABORT; \
-	if (!EC_POINT_is_on_curve(group, P, ctx)) ABORT; \
-	if (!BN_hex2bn(&z, _order)) ABORT; \
-	if (!BN_hex2bn(&cof, _cof)) ABORT; \
-	if (!EC_GROUP_set_generator(group, P, z, cof)) ABORT; \
-	if (!EC_POINT_get_affine_coordinates_GF2m(group, P, x, y, ctx)) ABORT; \
-	fprintf(stdout, "\n%s -- Generator:\n     x = 0x", _name); \
-	BN_print_fp(stdout, x); \
-	fprintf(stdout, "\n     y = 0x"); \
-	BN_print_fp(stdout, y); \
-	fprintf(stdout, "\n"); \
-	/* G_y value taken from the standard: */ \
-	if (!BN_hex2bn(&z, _y)) ABORT; \
-	if (0 != BN_cmp(y, z)) ABORT;
-#else 
-#define CHAR2_CURVE_TEST_INTERNAL(_name, _p, _a, _b, _x, _y, _y_bit, _order, _cof, _degree, _variable) \
-	if (!BN_hex2bn(&x, _x)) ABORT; \
-	if (!BN_hex2bn(&y, _y)) ABORT; \
-	if (!EC_POINT_set_affine_coordinates_GF2m(group, P, x, y, ctx)) ABORT; \
-	if (!EC_POINT_is_on_curve(group, P, ctx)) ABORT; \
-	if (!BN_hex2bn(&z, _order)) ABORT; \
-	if (!BN_hex2bn(&cof, _cof)) ABORT; \
-	if (!EC_GROUP_set_generator(group, P, z, cof)) ABORT; \
-	fprintf(stdout, "\n%s -- Generator:\n     x = 0x", _name); \
-	BN_print_fp(stdout, x); \
-	fprintf(stdout, "\n     y = 0x"); \
-	BN_print_fp(stdout, y); \
-	fprintf(stdout, "\n");
-#endif
-
-#define CHAR2_CURVE_TEST(_name, _p, _a, _b, _x, _y, _y_bit, _order, _cof, _degree, _variable) \
-	if (!BN_hex2bn(&p, _p)) ABORT; \
-	if (!BN_hex2bn(&a, _a)) ABORT; \
-	if (!BN_hex2bn(&b, _b)) ABORT; \
-	if (!EC_GROUP_set_curve_GF2m(group, p, a, b, ctx)) ABORT; \
-	CHAR2_CURVE_TEST_INTERNAL(_name, _p, _a, _b, _x, _y, _y_bit, _order, _cof, _degree, _variable) \
-	fprintf(stdout, "verify degree ..."); \
-	if (EC_GROUP_get_degree(group) != _degree) ABORT; \
-	fprintf(stdout, " ok\n"); \
-	fprintf(stdout, "verify group order ..."); \
-	fflush(stdout); \
-	if (!EC_GROUP_get_order(group, z, ctx)) ABORT; \
-	if (!EC_POINT_mul(group, Q, z, NULL, NULL, ctx)) ABORT; \
-	if (!EC_POINT_is_at_infinity(group, Q)) ABORT; \
-	fprintf(stdout, "."); \
-	fflush(stdout); \
-	/* if (!EC_GROUP_precompute_mult(group, ctx)) ABORT; */ \
-	if (!EC_POINT_mul(group, Q, z, NULL, NULL, ctx)) ABORT; \
-	if (!EC_POINT_is_at_infinity(group, Q)) ABORT; \
-	fprintf(stdout, " ok\n"); \
-	if (!(_variable = EC_GROUP_new(EC_GROUP_method_of(group)))) ABORT; \
-	if (!EC_GROUP_copy(_variable, group)) ABORT;
-
-void char2_field_tests()
-	{	
-	BN_CTX *ctx = NULL;
-	BIGNUM *p, *a, *b;
-	EC_GROUP *group;
-	EC_GROUP *C2_K163 = NULL, *C2_K233 = NULL, *C2_K283 = NULL, *C2_K409 = NULL, *C2_K571 = NULL;
-	EC_GROUP *C2_B163 = NULL, *C2_B233 = NULL, *C2_B283 = NULL, *C2_B409 = NULL, *C2_B571 = NULL;
-	EC_POINT *P, *Q, *R;
-	BIGNUM *x, *y, *z, *cof;
-	unsigned char buf[100];
-	size_t i, len;
-	int k;
-	
-#if 1 /* optional */
-	ctx = BN_CTX_new();
-	if (!ctx) ABORT;
-#endif
-
-	p = BN_new();
-	a = BN_new();
-	b = BN_new();
-	if (!p || !a || !b) ABORT;
-
-	if (!BN_hex2bn(&p, "13")) ABORT;
-	if (!BN_hex2bn(&a, "3")) ABORT;
-	if (!BN_hex2bn(&b, "1")) ABORT;
-	
-	group = EC_GROUP_new(EC_GF2m_simple_method()); /* applications should use EC_GROUP_new_curve_GF2m
-	                                                * so that the library gets to choose the EC_METHOD */
-	if (!group) ABORT;
-	if (!EC_GROUP_set_curve_GF2m(group, p, a, b, ctx)) ABORT;
-
-	{
-		EC_GROUP *tmp;
-		tmp = EC_GROUP_new(EC_GROUP_method_of(group));
-		if (!tmp) ABORT;
-		if (!EC_GROUP_copy(tmp, group)) ABORT;
-		EC_GROUP_free(group);
-		group = tmp;
-	}
-	
-	if (!EC_GROUP_get_curve_GF2m(group, p, a, b, ctx)) ABORT;
-
-	fprintf(stdout, "Curve defined by Weierstrass equation\n     y^2 + x*y = x^3 + a*x^2 + b  (mod 0x");
-	BN_print_fp(stdout, p);
-	fprintf(stdout, ")\n     a = 0x");
-	BN_print_fp(stdout, a);
-	fprintf(stdout, "\n     b = 0x");
-	BN_print_fp(stdout, b);
-	fprintf(stdout, "\n(0x... means binary polynomial)\n");
-
-	P = EC_POINT_new(group);
-	Q = EC_POINT_new(group);
-	R = EC_POINT_new(group);
-	if (!P || !Q || !R) ABORT;
-	
-	if (!EC_POINT_set_to_infinity(group, P)) ABORT;
-	if (!EC_POINT_is_at_infinity(group, P)) ABORT;
-
-	buf[0] = 0;
-	if (!EC_POINT_oct2point(group, Q, buf, 1, ctx)) ABORT;
-
-	if (!EC_POINT_add(group, P, P, Q, ctx)) ABORT;
-	if (!EC_POINT_is_at_infinity(group, P)) ABORT;
-
-	x = BN_new();
-	y = BN_new();
-	z = BN_new();
-	cof = BN_new();
-	if (!x || !y || !z || !cof) ABORT;
-
-	if (!BN_hex2bn(&x, "6")) ABORT;
-/* Change test based on whether binary point compression is enabled or not. */
-#ifdef OPENSSL_EC_BIN_PT_COMP
-	if (!EC_POINT_set_compressed_coordinates_GF2m(group, Q, x, 1, ctx)) ABORT;
-#else
-	if (!BN_hex2bn(&y, "8")) ABORT;
-	if (!EC_POINT_set_affine_coordinates_GF2m(group, Q, x, y, ctx)) ABORT;
-#endif
-	if (!EC_POINT_is_on_curve(group, Q, ctx))
-		{
-/* Change test based on whether binary point compression is enabled or not. */
-#ifdef OPENSSL_EC_BIN_PT_COMP
-		if (!EC_POINT_get_affine_coordinates_GF2m(group, Q, x, y, ctx)) ABORT;
-#endif
-		fprintf(stderr, "Point is not on curve: x = 0x");
-		BN_print_fp(stderr, x);
-		fprintf(stderr, ", y = 0x");
-		BN_print_fp(stderr, y);
-		fprintf(stderr, "\n");
-		ABORT;
-		}
-
-	fprintf(stdout, "A cyclic subgroup:\n");
-	k = 100;
-	do
-		{
-		if (k-- == 0) ABORT;
-
-		if (EC_POINT_is_at_infinity(group, P))
-			fprintf(stdout, "     point at infinity\n");
-		else
-			{
-			if (!EC_POINT_get_affine_coordinates_GF2m(group, P, x, y, ctx)) ABORT;
-
-			fprintf(stdout, "     x = 0x");
-			BN_print_fp(stdout, x);
-			fprintf(stdout, ", y = 0x");
-			BN_print_fp(stdout, y);
-			fprintf(stdout, "\n");
-			}
-		
-		if (!EC_POINT_copy(R, P)) ABORT;
-		if (!EC_POINT_add(group, P, P, Q, ctx)) ABORT;
-		}
-	while (!EC_POINT_is_at_infinity(group, P));
-
-	if (!EC_POINT_add(group, P, Q, R, ctx)) ABORT;
-	if (!EC_POINT_is_at_infinity(group, P)) ABORT;
-
-/* Change test based on whether binary point compression is enabled or not. */
-#ifdef OPENSSL_EC_BIN_PT_COMP
-	len = EC_POINT_point2oct(group, Q, POINT_CONVERSION_COMPRESSED, buf, sizeof buf, ctx);
-	if (len == 0) ABORT;
-	if (!EC_POINT_oct2point(group, P, buf, len, ctx)) ABORT;
-	if (0 != EC_POINT_cmp(group, P, Q, ctx)) ABORT;
-	fprintf(stdout, "Generator as octet string, compressed form:\n     ");
-	for (i = 0; i < len; i++) fprintf(stdout, "%02X", buf[i]);
-#endif
-	
-	len = EC_POINT_point2oct(group, Q, POINT_CONVERSION_UNCOMPRESSED, buf, sizeof buf, ctx);
-	if (len == 0) ABORT;
-	if (!EC_POINT_oct2point(group, P, buf, len, ctx)) ABORT;
-	if (0 != EC_POINT_cmp(group, P, Q, ctx)) ABORT;
-	fprintf(stdout, "\nGenerator as octet string, uncompressed form:\n     ");
-	for (i = 0; i < len; i++) fprintf(stdout, "%02X", buf[i]);
-	
-/* Change test based on whether binary point compression is enabled or not. */
-#ifdef OPENSSL_EC_BIN_PT_COMP
-	len = EC_POINT_point2oct(group, Q, POINT_CONVERSION_HYBRID, buf, sizeof buf, ctx);
-	if (len == 0) ABORT;
-	if (!EC_POINT_oct2point(group, P, buf, len, ctx)) ABORT;
-	if (0 != EC_POINT_cmp(group, P, Q, ctx)) ABORT;
-	fprintf(stdout, "\nGenerator as octet string, hybrid form:\n     ");
-	for (i = 0; i < len; i++) fprintf(stdout, "%02X", buf[i]);
-#endif
-
-	fprintf(stdout, "\n");
-	
-	if (!EC_POINT_invert(group, P, ctx)) ABORT;
-	if (0 != EC_POINT_cmp(group, P, R, ctx)) ABORT;
-
-
-	/* Curve K-163 (FIPS PUB 186-2, App. 6) */
-	CHAR2_CURVE_TEST
-		(
-		"NIST curve K-163",
-		"0800000000000000000000000000000000000000C9",
-		"1",
-		"1",
-		"02FE13C0537BBC11ACAA07D793DE4E6D5E5C94EEE8",
-		"0289070FB05D38FF58321F2E800536D538CCDAA3D9",
-		1,
-		"04000000000000000000020108A2E0CC0D99F8A5EF",
-		"2",
-		163,
-		C2_K163
-		);
-
-	/* Curve B-163 (FIPS PUB 186-2, App. 6) */
-	CHAR2_CURVE_TEST
-		(
-		"NIST curve B-163",
-		"0800000000000000000000000000000000000000C9",
-		"1",
-		"020A601907B8C953CA1481EB10512F78744A3205FD",
-		"03F0EBA16286A2D57EA0991168D4994637E8343E36",
-		"00D51FBC6C71A0094FA2CDD545B11C5C0C797324F1",
-		1,
-		"040000000000000000000292FE77E70C12A4234C33",
-		"2",
-		163,
-		C2_B163
-		);
-
-	/* Curve K-233 (FIPS PUB 186-2, App. 6) */
-	CHAR2_CURVE_TEST
-		(
-		"NIST curve K-233",
-		"020000000000000000000000000000000000000004000000000000000001",
-		"0",
-		"1",
-		"017232BA853A7E731AF129F22FF4149563A419C26BF50A4C9D6EEFAD6126",
-		"01DB537DECE819B7F70F555A67C427A8CD9BF18AEB9B56E0C11056FAE6A3",
-		0,
-		"008000000000000000000000000000069D5BB915BCD46EFB1AD5F173ABDF",
-		"4",
-		233,
-		C2_K233
-		);
-
-	/* Curve B-233 (FIPS PUB 186-2, App. 6) */
-	CHAR2_CURVE_TEST
-		(
-		"NIST curve B-233",
-		"020000000000000000000000000000000000000004000000000000000001",
-		"000000000000000000000000000000000000000000000000000000000001",
-		"0066647EDE6C332C7F8C0923BB58213B333B20E9CE4281FE115F7D8F90AD",
-		"00FAC9DFCBAC8313BB2139F1BB755FEF65BC391F8B36F8F8EB7371FD558B",
-		"01006A08A41903350678E58528BEBF8A0BEFF867A7CA36716F7E01F81052",
-		1,
-		"01000000000000000000000000000013E974E72F8A6922031D2603CFE0D7",
-		"2",
-		233,
-		C2_B233
-		);
-
-	/* Curve K-283 (FIPS PUB 186-2, App. 6) */
-	CHAR2_CURVE_TEST
-		(
-		"NIST curve K-283",
-		"0800000000000000000000000000000000000000000000000000000000000000000010A1",
-		"0",
-		"1",
-		"0503213F78CA44883F1A3B8162F188E553CD265F23C1567A16876913B0C2AC2458492836",
-		"01CCDA380F1C9E318D90F95D07E5426FE87E45C0E8184698E45962364E34116177DD2259",
-		0,
-		"01FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFE9AE2ED07577265DFF7F94451E061E163C61",
-		"4",
-		283,
-		C2_K283
-		);
-
-	/* Curve B-283 (FIPS PUB 186-2, App. 6) */
-	CHAR2_CURVE_TEST
-		(
-		"NIST curve B-283",
-		"0800000000000000000000000000000000000000000000000000000000000000000010A1",
-		"000000000000000000000000000000000000000000000000000000000000000000000001",
-		"027B680AC8B8596DA5A4AF8A19A0303FCA97FD7645309FA2A581485AF6263E313B79A2F5",
-		"05F939258DB7DD90E1934F8C70B0DFEC2EED25B8557EAC9C80E2E198F8CDBECD86B12053",
-		"03676854FE24141CB98FE6D4B20D02B4516FF702350EDDB0826779C813F0DF45BE8112F4",
-		1,
-		"03FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFEF90399660FC938A90165B042A7CEFADB307",
-		"2",
-		283,
-		C2_B283
-		);
-
-	/* Curve K-409 (FIPS PUB 186-2, App. 6) */
-	CHAR2_CURVE_TEST
-		(
-		"NIST curve K-409",
-		"02000000000000000000000000000000000000000000000000000000000000000000000000000000008000000000000000000001",
-		"0",
-		"1",
-		"0060F05F658F49C1AD3AB1890F7184210EFD0987E307C84C27ACCFB8F9F67CC2C460189EB5AAAA62EE222EB1B35540CFE9023746",
-		"01E369050B7C4E42ACBA1DACBF04299C3460782F918EA427E6325165E9EA10E3DA5F6C42E9C55215AA9CA27A5863EC48D8E0286B",
-		1,
-		"007FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFE5F83B2D4EA20400EC4557D5ED3E3E7CA5B4B5C83B8E01E5FCF",
-		"4",
-		409,
-		C2_K409
-		);
-
-	/* Curve B-409 (FIPS PUB 186-2, App. 6) */
-	CHAR2_CURVE_TEST
-		(
-		"NIST curve B-409",
-		"02000000000000000000000000000000000000000000000000000000000000000000000000000000008000000000000000000001",
-		"00000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000001",
-		"0021A5C2C8EE9FEB5C4B9A753B7B476B7FD6422EF1F3DD674761FA99D6AC27C8A9A197B272822F6CD57A55AA4F50AE317B13545F",
-		"015D4860D088DDB3496B0C6064756260441CDE4AF1771D4DB01FFE5B34E59703DC255A868A1180515603AEAB60794E54BB7996A7",
-		"0061B1CFAB6BE5F32BBFA78324ED106A7636B9C5A7BD198D0158AA4F5488D08F38514F1FDF4B4F40D2181B3681C364BA0273C706",
-		1,
-		"010000000000000000000000000000000000000000000000000001E2AAD6A612F33307BE5FA47C3C9E052F838164CD37D9A21173",
-		"2",
-		409,
-		C2_B409
-		);
-
-	/* Curve K-571 (FIPS PUB 186-2, App. 6) */
-	CHAR2_CURVE_TEST
-		(
-		"NIST curve K-571",
-		"80000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000425",
-		"0",
-		"1",
-		"026EB7A859923FBC82189631F8103FE4AC9CA2970012D5D46024804801841CA44370958493B205E647DA304DB4CEB08CBBD1BA39494776FB988B47174DCA88C7E2945283A01C8972",
-		"0349DC807F4FBF374F4AEADE3BCA95314DD58CEC9F307A54FFC61EFC006D8A2C9D4979C0AC44AEA74FBEBBB9F772AEDCB620B01A7BA7AF1B320430C8591984F601CD4C143EF1C7A3",
-		0,
-		"020000000000000000000000000000000000000000000000000000000000000000000000131850E1F19A63E4B391A8DB917F4138B630D84BE5D639381E91DEB45CFE778F637C1001",
-		"4",
-		571,
-		C2_K571
-		);
-
-	/* Curve B-571 (FIPS PUB 186-2, App. 6) */
-	CHAR2_CURVE_TEST
-		(
-		"NIST curve B-571",
-		"80000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000425",
-		"000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000001",
-		"02F40E7E2221F295DE297117B7F3D62F5C6A97FFCB8CEFF1CD6BA8CE4A9A18AD84FFABBD8EFA59332BE7AD6756A66E294AFD185A78FF12AA520E4DE739BACA0C7FFEFF7F2955727A",
-		"0303001D34B856296C16C0D40D3CD7750A93D1D2955FA80AA5F40FC8DB7B2ABDBDE53950F4C0D293CDD711A35B67FB1499AE60038614F1394ABFA3B4C850D927E1E7769C8EEC2D19",
-		"037BF27342DA639B6DCCFFFEB73D69D78C6C27A6009CBBCA1980F8533921E8A684423E43BAB08A576291AF8F461BB2A8B3531D2F0485C19B16E2F1516E23DD3C1A4827AF1B8AC15B",
-		1,
-		"03FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFE661CE18FF55987308059B186823851EC7DD9CA1161DE93D5174D66E8382E9BB2FE84E47",
-		"2",
-		571,
-		C2_B571
-		);
-
-	/* more tests using the last curve */
-
-	if (!EC_POINT_copy(Q, P)) ABORT;
-	if (EC_POINT_is_at_infinity(group, Q)) ABORT;
-	if (!EC_POINT_dbl(group, P, P, ctx)) ABORT;
-	if (!EC_POINT_is_on_curve(group, P, ctx)) ABORT;
-	if (!EC_POINT_invert(group, Q, ctx)) ABORT; /* P = -2Q */
-
-	if (!EC_POINT_add(group, R, P, Q, ctx)) ABORT;
-	if (!EC_POINT_add(group, R, R, Q, ctx)) ABORT;
-	if (!EC_POINT_is_at_infinity(group, R)) ABORT; /* R = P + 2Q */
-
-	{
-		const EC_POINT *points[3];
-		const BIGNUM *scalars[3];
-	
-		if (EC_POINT_is_at_infinity(group, Q)) ABORT;
-		points[0] = Q;
-		points[1] = Q;
-		points[2] = Q;
-
-		if (!BN_add(y, z, BN_value_one())) ABORT;
-		if (BN_is_odd(y)) ABORT;
-		if (!BN_rshift1(y, y)) ABORT;
-		scalars[0] = y; /* (group order + 1)/2,  so  y*Q + y*Q = Q */
-		scalars[1] = y;
-
-		fprintf(stdout, "combined multiplication ...");
-		fflush(stdout);
-
-		/* z is still the group order */
-		if (!EC_POINTs_mul(group, P, NULL, 2, points, scalars, ctx)) ABORT;
-		if (!EC_POINTs_mul(group, R, z, 2, points, scalars, ctx)) ABORT;
-		if (0 != EC_POINT_cmp(group, P, R, ctx)) ABORT;
-		if (0 != EC_POINT_cmp(group, R, Q, ctx)) ABORT;
-
-		fprintf(stdout, ".");
-		fflush(stdout);
-
-		if (!BN_pseudo_rand(y, BN_num_bits(y), 0, 0)) ABORT;
-		if (!BN_add(z, z, y)) ABORT;
-		BN_set_negative(z, 1);
-		scalars[0] = y;
-		scalars[1] = z; /* z = -(order + y) */
-
-		if (!EC_POINTs_mul(group, P, NULL, 2, points, scalars, ctx)) ABORT;
-		if (!EC_POINT_is_at_infinity(group, P)) ABORT;
-
-		fprintf(stdout, ".");
-		fflush(stdout);
-
-		if (!BN_pseudo_rand(x, BN_num_bits(y) - 1, 0, 0)) ABORT;
-		if (!BN_add(z, x, y)) ABORT;
-		BN_set_negative(z, 1);
-		scalars[0] = x;
-		scalars[1] = y;
-		scalars[2] = z; /* z = -(x+y) */
-
-		if (!EC_POINTs_mul(group, P, NULL, 3, points, scalars, ctx)) ABORT;
-		if (!EC_POINT_is_at_infinity(group, P)) ABORT;
-
-		fprintf(stdout, " ok\n\n");
-	}
-
-
-#if 0
-	timings(C2_K163, TIMING_BASE_PT, ctx);
-	timings(C2_K163, TIMING_RAND_PT, ctx);
-	timings(C2_K163, TIMING_SIMUL, ctx);
-	timings(C2_B163, TIMING_BASE_PT, ctx);
-	timings(C2_B163, TIMING_RAND_PT, ctx);
-	timings(C2_B163, TIMING_SIMUL, ctx);
-	timings(C2_K233, TIMING_BASE_PT, ctx);
-	timings(C2_K233, TIMING_RAND_PT, ctx);
-	timings(C2_K233, TIMING_SIMUL, ctx);
-	timings(C2_B233, TIMING_BASE_PT, ctx);
-	timings(C2_B233, TIMING_RAND_PT, ctx);
-	timings(C2_B233, TIMING_SIMUL, ctx);
-	timings(C2_K283, TIMING_BASE_PT, ctx);
-	timings(C2_K283, TIMING_RAND_PT, ctx);
-	timings(C2_K283, TIMING_SIMUL, ctx);
-	timings(C2_B283, TIMING_BASE_PT, ctx);
-	timings(C2_B283, TIMING_RAND_PT, ctx);
-	timings(C2_B283, TIMING_SIMUL, ctx);
-	timings(C2_K409, TIMING_BASE_PT, ctx);
-	timings(C2_K409, TIMING_RAND_PT, ctx);
-	timings(C2_K409, TIMING_SIMUL, ctx);
-	timings(C2_B409, TIMING_BASE_PT, ctx);
-	timings(C2_B409, TIMING_RAND_PT, ctx);
-	timings(C2_B409, TIMING_SIMUL, ctx);
-	timings(C2_K571, TIMING_BASE_PT, ctx);
-	timings(C2_K571, TIMING_RAND_PT, ctx);
-	timings(C2_K571, TIMING_SIMUL, ctx);
-	timings(C2_B571, TIMING_BASE_PT, ctx);
-	timings(C2_B571, TIMING_RAND_PT, ctx);
-	timings(C2_B571, TIMING_SIMUL, ctx);
-#endif
-
-
-	if (ctx)
-		BN_CTX_free(ctx);
-	BN_free(p); BN_free(a);	BN_free(b);
-	EC_GROUP_free(group);
-	EC_POINT_free(P);
-	EC_POINT_free(Q);
-	EC_POINT_free(R);
-	BN_free(x); BN_free(y); BN_free(z); BN_free(cof);
-
-	if (C2_K163) EC_GROUP_free(C2_K163);
-	if (C2_B163) EC_GROUP_free(C2_B163);
-	if (C2_K233) EC_GROUP_free(C2_K233);
-	if (C2_B233) EC_GROUP_free(C2_B233);
-	if (C2_K283) EC_GROUP_free(C2_K283);
-	if (C2_B283) EC_GROUP_free(C2_B283);
-	if (C2_K409) EC_GROUP_free(C2_K409);
-	if (C2_B409) EC_GROUP_free(C2_B409);
-	if (C2_K571) EC_GROUP_free(C2_K571);
-	if (C2_B571) EC_GROUP_free(C2_B571);
-
-	}
-
-void internal_curve_test(void)
-	{
-	EC_builtin_curve *curves = NULL;
-	size_t crv_len = 0, n = 0;
-	int    ok = 1;
-
-	crv_len = EC_get_builtin_curves(NULL, 0);
-
-	curves = OPENSSL_malloc(sizeof(EC_builtin_curve) * crv_len);
-
-	if (curves == NULL)
-		return;
-
-	if (!EC_get_builtin_curves(curves, crv_len))
-		{
-		OPENSSL_free(curves);
-		return;
-		}
-
-	fprintf(stdout, "testing internal curves: ");
-		
-	for (n = 0; n < crv_len; n++)
-		{
-		EC_GROUP *group = NULL;
-		int nid = curves[n].nid;
-		if ((group = EC_GROUP_new_by_curve_name(nid)) == NULL)
-			{
-			ok = 0;
-			fprintf(stdout, "\nEC_GROUP_new_curve_name() failed with"
-				" curve %s\n", OBJ_nid2sn(nid));
-			/* try next curve */
-			continue;
-			}
-		if (!EC_GROUP_check(group, NULL))
-			{
-			ok = 0;
-			fprintf(stdout, "\nEC_GROUP_check() failed with"
-				" curve %s\n", OBJ_nid2sn(nid));
-			EC_GROUP_free(group);
-			/* try the next curve */
-			continue;
-			}
-		fprintf(stdout, ".");
-		fflush(stdout);
-		EC_GROUP_free(group);
-		}
-	if (ok)
-		fprintf(stdout, " ok\n");
-	else
-		fprintf(stdout, " failed\n");
-	OPENSSL_free(curves);
-	return;
-	}
-
-static const char rnd_seed[] = "string to make the random number generator think it has entropy";
-
-int main(int argc, char *argv[])
-	{	
-	
-	/* enable memory leak checking unless explicitly disabled */
-	if (!((getenv("OPENSSL_DEBUG_MEMORY") != NULL) && (0 == strcmp(getenv("OPENSSL_DEBUG_MEMORY"), "off"))))
-		{
-		CRYPTO_malloc_debug_init();
-		CRYPTO_set_mem_debug_options(V_CRYPTO_MDEBUG_ALL);
-		}
-	else
-		{
-		/* OPENSSL_DEBUG_MEMORY=off */
-		CRYPTO_set_mem_debug_functions(0, 0, 0, 0, 0);
-		}
-	CRYPTO_mem_ctrl(CRYPTO_MEM_CHECK_ON);
-	ERR_load_crypto_strings();
-
-	RAND_seed(rnd_seed, sizeof rnd_seed); /* or BN_generate_prime may fail */
-
-	prime_field_tests();
-	puts("");
-	char2_field_tests();
-	/* test the internal curves */
-	internal_curve_test();
-
-#ifndef OPENSSL_NO_ENGINE
-	ENGINE_cleanup();
-#endif
-	CRYPTO_cleanup_all_ex_data();
-	ERR_free_strings();
-	ERR_remove_state(0);
-	CRYPTO_mem_leaks_fp(stderr);
-	
-	return 0;
-	}
-#endif
diff --git a/crypto/openssl/crypto/ecdh/Makefile b/crypto/openssl/crypto/ecdh/Makefile
deleted file mode 100644
index 95aa69fea58f..000000000000
--- a/crypto/openssl/crypto/ecdh/Makefile
+++ /dev/null
@@ -1,111 +0,0 @@
-#
-# crypto/ecdh/Makefile
-#
-
-DIR=	ecdh
-TOP=	../..
-CC=	cc
-INCLUDES= -I.. -I$(TOP) -I../../include
-CFLAG=-g -Wall
-MAKEFILE=	Makefile
-AR=		ar r
-
-CFLAGS= $(INCLUDES) $(CFLAG)
-
-GENERAL=Makefile
-TEST=ecdhtest.c
-APPS=
-
-LIB=$(TOP)/libcrypto.a
-LIBSRC=	ech_lib.c ech_ossl.c ech_key.c ech_err.c
-
-LIBOBJ=	ech_lib.o ech_ossl.o ech_key.o ech_err.o
-
-SRC= $(LIBSRC)
-
-EXHEADER= ecdh.h
-HEADER=	ech_locl.h $(EXHEADER)
-
-ALL=    $(GENERAL) $(SRC) $(HEADER)
-
-top:
-	(cd ../..; $(MAKE) DIRS=crypto SDIRS=$(DIR) sub_all)
-
-all:	lib
-
-lib:	$(LIBOBJ)
-	$(AR) $(LIB) $(LIBOBJ)
-	$(RANLIB) $(LIB) || echo Never mind.
-	@touch lib
-
-files:
-	$(PERL) $(TOP)/util/files.pl Makefile >> $(TOP)/MINFO
-
-links:
-	@$(PERL) $(TOP)/util/mklink.pl ../../include/openssl $(EXHEADER)
-	@$(PERL) $(TOP)/util/mklink.pl ../../test $(TEST)
-	@$(PERL) $(TOP)/util/mklink.pl ../../apps $(APPS)
-
-install:
-	@[ -n "$(INSTALLTOP)" ] # should be set by top Makefile...
-	@headerlist="$(EXHEADER)"; for i in $$headerlist; \
-	do  \
-	(cp $$i $(INSTALL_PREFIX)$(INSTALLTOP)/include/openssl/$$i; \
-	chmod 644 $(INSTALL_PREFIX)$(INSTALLTOP)/include/openssl/$$i ); \
-	done;
-
-tags:
-	ctags $(SRC)
-
-tests:
-
-lint:
-	lint -DLINT $(INCLUDES) $(SRC)>fluff
-
-depend:
-	@[ -n "$(MAKEDEPEND)" ] # should be set by upper Makefile...
-	$(MAKEDEPEND) -- $(CFLAG) $(INCLUDES) $(DEPFLAG) -- $(PROGS) $(LIBSRC)
-
-dclean:
-	$(PERL) -pe 'if (/^# DO NOT DELETE THIS LINE/) {print; exit(0);}' $(MAKEFILE) >Makefile.new
-	mv -f Makefile.new $(MAKEFILE)
-
-clean:
-	rm -f *.o */*.o *.obj lib tags core .pure .nfs* *.old *.bak fluff
-
-# DO NOT DELETE THIS LINE -- make depend depends on it.
-
-ech_err.o: ../../include/openssl/asn1.h ../../include/openssl/bio.h
-ech_err.o: ../../include/openssl/crypto.h ../../include/openssl/e_os2.h
-ech_err.o: ../../include/openssl/ec.h ../../include/openssl/ecdh.h
-ech_err.o: ../../include/openssl/err.h ../../include/openssl/lhash.h
-ech_err.o: ../../include/openssl/opensslconf.h ../../include/openssl/opensslv.h
-ech_err.o: ../../include/openssl/ossl_typ.h ../../include/openssl/safestack.h
-ech_err.o: ../../include/openssl/stack.h ../../include/openssl/symhacks.h
-ech_err.o: ech_err.c
-ech_key.o: ../../include/openssl/asn1.h ../../include/openssl/bio.h
-ech_key.o: ../../include/openssl/crypto.h ../../include/openssl/e_os2.h
-ech_key.o: ../../include/openssl/ec.h ../../include/openssl/ecdh.h
-ech_key.o: ../../include/openssl/engine.h ../../include/openssl/opensslconf.h
-ech_key.o: ../../include/openssl/opensslv.h ../../include/openssl/ossl_typ.h
-ech_key.o: ../../include/openssl/safestack.h ../../include/openssl/stack.h
-ech_key.o: ../../include/openssl/symhacks.h ech_key.c ech_locl.h
-ech_lib.o: ../../include/openssl/asn1.h ../../include/openssl/bio.h
-ech_lib.o: ../../include/openssl/crypto.h ../../include/openssl/e_os2.h
-ech_lib.o: ../../include/openssl/ec.h ../../include/openssl/ecdh.h
-ech_lib.o: ../../include/openssl/engine.h ../../include/openssl/err.h
-ech_lib.o: ../../include/openssl/lhash.h ../../include/openssl/opensslconf.h
-ech_lib.o: ../../include/openssl/opensslv.h ../../include/openssl/ossl_typ.h
-ech_lib.o: ../../include/openssl/safestack.h ../../include/openssl/stack.h
-ech_lib.o: ../../include/openssl/symhacks.h ech_lib.c ech_locl.h
-ech_ossl.o: ../../e_os.h ../../include/openssl/asn1.h
-ech_ossl.o: ../../include/openssl/bio.h ../../include/openssl/bn.h
-ech_ossl.o: ../../include/openssl/buffer.h ../../include/openssl/crypto.h
-ech_ossl.o: ../../include/openssl/e_os2.h ../../include/openssl/ec.h
-ech_ossl.o: ../../include/openssl/ecdh.h ../../include/openssl/err.h
-ech_ossl.o: ../../include/openssl/lhash.h ../../include/openssl/obj_mac.h
-ech_ossl.o: ../../include/openssl/opensslconf.h
-ech_ossl.o: ../../include/openssl/opensslv.h ../../include/openssl/ossl_typ.h
-ech_ossl.o: ../../include/openssl/safestack.h ../../include/openssl/sha.h
-ech_ossl.o: ../../include/openssl/stack.h ../../include/openssl/symhacks.h
-ech_ossl.o: ../cryptlib.h ech_locl.h ech_ossl.c
diff --git a/crypto/openssl/crypto/ecdh/ecdh.h b/crypto/openssl/crypto/ecdh/ecdh.h
deleted file mode 100644
index b4b58ee65ba2..000000000000
--- a/crypto/openssl/crypto/ecdh/ecdh.h
+++ /dev/null
@@ -1,123 +0,0 @@
-/* crypto/ecdh/ecdh.h */
-/* ====================================================================
- * Copyright 2002 Sun Microsystems, Inc. ALL RIGHTS RESERVED.
- *
- * The Elliptic Curve Public-Key Crypto Library (ECC Code) included
- * herein is developed by SUN MICROSYSTEMS, INC., and is contributed
- * to the OpenSSL project.
- *
- * The ECC Code is licensed pursuant to the OpenSSL open source
- * license provided below.
- *
- * The ECDH software is originally written by Douglas Stebila of
- * Sun Microsystems Laboratories.
- *
- */
-/* ====================================================================
- * Copyright (c) 2000-2002 The OpenSSL Project.  All rights reserved.
- *
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions
- * are met:
- *
- * 1. Redistributions of source code must retain the above copyright
- *    notice, this list of conditions and the following disclaimer. 
- *
- * 2. Redistributions in binary form must reproduce the above copyright
- *    notice, this list of conditions and the following disclaimer in
- *    the documentation and/or other materials provided with the
- *    distribution.
- *
- * 3. All advertising materials mentioning features or use of this
- *    software must display the following acknowledgment:
- *    "This product includes software developed by the OpenSSL Project
- *    for use in the OpenSSL Toolkit. (http://www.OpenSSL.org/)"
- *
- * 4. The names "OpenSSL Toolkit" and "OpenSSL Project" must not be used to
- *    endorse or promote products derived from this software without
- *    prior written permission. For written permission, please contact
- *    licensing@OpenSSL.org.
- *
- * 5. Products derived from this software may not be called "OpenSSL"
- *    nor may "OpenSSL" appear in their names without prior written
- *    permission of the OpenSSL Project.
- *
- * 6. Redistributions of any form whatsoever must retain the following
- *    acknowledgment:
- *    "This product includes software developed by the OpenSSL Project
- *    for use in the OpenSSL Toolkit (http://www.OpenSSL.org/)"
- *
- * THIS SOFTWARE IS PROVIDED BY THE OpenSSL PROJECT ``AS IS'' AND ANY
- * EXPRESSED OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
- * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR
- * PURPOSE ARE DISCLAIMED.  IN NO EVENT SHALL THE OpenSSL PROJECT OR
- * ITS CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
- * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
- * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
- * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
- * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
- * STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
- * ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED
- * OF THE POSSIBILITY OF SUCH DAMAGE.
- * ====================================================================
- *
- * This product includes cryptographic software written by Eric Young
- * (eay@cryptsoft.com).  This product includes software written by Tim
- * Hudson (tjh@cryptsoft.com).
- *
- */
-#ifndef HEADER_ECDH_H
-#define HEADER_ECDH_H
-
-#include <openssl/opensslconf.h>
-
-#ifdef OPENSSL_NO_ECDH
-#error ECDH is disabled.
-#endif
-
-#include <openssl/ec.h>
-#include <openssl/ossl_typ.h>
-#ifndef OPENSSL_NO_DEPRECATED
-#include <openssl/bn.h>
-#endif
-
-#ifdef __cplusplus
-extern "C" {
-#endif
-
-const ECDH_METHOD *ECDH_OpenSSL(void);
-
-void	  ECDH_set_default_method(const ECDH_METHOD *);
-const ECDH_METHOD *ECDH_get_default_method(void);
-int 	  ECDH_set_method(EC_KEY *, const ECDH_METHOD *);
-
-int ECDH_compute_key(void *out, size_t outlen, const EC_POINT *pub_key, EC_KEY *ecdh,
-                     void *(*KDF)(const void *in, size_t inlen, void *out, size_t *outlen));
-
-int 	  ECDH_get_ex_new_index(long argl, void *argp, CRYPTO_EX_new 
-		*new_func, CRYPTO_EX_dup *dup_func, CRYPTO_EX_free *free_func);
-int 	  ECDH_set_ex_data(EC_KEY *d, int idx, void *arg);
-void 	  *ECDH_get_ex_data(EC_KEY *d, int idx);
-
-
-/* BEGIN ERROR CODES */
-/* The following lines are auto generated by the script mkerr.pl. Any changes
- * made after this point may be overwritten when the script is next run.
- */
-void ERR_load_ECDH_strings(void);
-
-/* Error codes for the ECDH functions. */
-
-/* Function codes. */
-#define ECDH_F_ECDH_COMPUTE_KEY				 100
-#define ECDH_F_ECDH_DATA_NEW_METHOD			 101
-
-/* Reason codes. */
-#define ECDH_R_KDF_FAILED				 102
-#define ECDH_R_NO_PRIVATE_VALUE				 100
-#define ECDH_R_POINT_ARITHMETIC_FAILURE			 101
-
-#ifdef  __cplusplus
-}
-#endif
-#endif
diff --git a/crypto/openssl/crypto/ecdh/ecdhtest.c b/crypto/openssl/crypto/ecdh/ecdhtest.c
deleted file mode 100644
index 01baa5f4942f..000000000000
--- a/crypto/openssl/crypto/ecdh/ecdhtest.c
+++ /dev/null
@@ -1,368 +0,0 @@
-/* crypto/ecdh/ecdhtest.c */
-/* ====================================================================
- * Copyright 2002 Sun Microsystems, Inc. ALL RIGHTS RESERVED.
- *
- * The Elliptic Curve Public-Key Crypto Library (ECC Code) included
- * herein is developed by SUN MICROSYSTEMS, INC., and is contributed
- * to the OpenSSL project.
- *
- * The ECC Code is licensed pursuant to the OpenSSL open source
- * license provided below.
- *
- * The ECDH software is originally written by Douglas Stebila of
- * Sun Microsystems Laboratories.
- *
- */
-/* ====================================================================
- * Copyright (c) 1998-2003 The OpenSSL Project.  All rights reserved.
- *
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions
- * are met:
- *
- * 1. Redistributions of source code must retain the above copyright
- *    notice, this list of conditions and the following disclaimer. 
- *
- * 2. Redistributions in binary form must reproduce the above copyright
- *    notice, this list of conditions and the following disclaimer in
- *    the documentation and/or other materials provided with the
- *    distribution.
- *
- * 3. All advertising materials mentioning features or use of this
- *    software must display the following acknowledgment:
- *    "This product includes software developed by the OpenSSL Project
- *    for use in the OpenSSL Toolkit. (http://www.openssl.org/)"
- *
- * 4. The names "OpenSSL Toolkit" and "OpenSSL Project" must not be used to
- *    endorse or promote products derived from this software without
- *    prior written permission. For written permission, please contact
- *    openssl-core@openssl.org.
- *
- * 5. Products derived from this software may not be called "OpenSSL"
- *    nor may "OpenSSL" appear in their names without prior written
- *    permission of the OpenSSL Project.
- *
- * 6. Redistributions of any form whatsoever must retain the following
- *    acknowledgment:
- *    "This product includes software developed by the OpenSSL Project
- *    for use in the OpenSSL Toolkit (http://www.openssl.org/)"
- *
- * THIS SOFTWARE IS PROVIDED BY THE OpenSSL PROJECT ``AS IS'' AND ANY
- * EXPRESSED OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
- * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR
- * PURPOSE ARE DISCLAIMED.  IN NO EVENT SHALL THE OpenSSL PROJECT OR
- * ITS CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
- * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
- * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
- * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
- * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
- * STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
- * ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED
- * OF THE POSSIBILITY OF SUCH DAMAGE.
- * ====================================================================
- *
- * This product includes cryptographic software written by Eric Young
- * (eay@cryptsoft.com).  This product includes software written by Tim
- * Hudson (tjh@cryptsoft.com).
- *
- */
-
-#include <stdio.h>
-#include <stdlib.h>
-#include <string.h>
-
-#include "../e_os.h"
-
-#include <openssl/opensslconf.h>	/* for OPENSSL_NO_ECDH */
-#include <openssl/crypto.h>
-#include <openssl/bio.h>
-#include <openssl/bn.h>
-#include <openssl/objects.h>
-#include <openssl/rand.h>
-#include <openssl/sha.h>
-#include <openssl/err.h>
-
-#ifdef OPENSSL_NO_ECDH
-int main(int argc, char *argv[])
-{
-    printf("No ECDH support\n");
-    return(0);
-}
-#else
-#include <openssl/ec.h>
-#include <openssl/ecdh.h>
-
-#ifdef OPENSSL_SYS_WIN16
-#define MS_CALLBACK	_far _loadds
-#else
-#define MS_CALLBACK
-#endif
-
-#if 0
-static void MS_CALLBACK cb(int p, int n, void *arg);
-#endif
-
-static const char rnd_seed[] = "string to make the random number generator think it has entropy";
-
-
-static const int KDF1_SHA1_len = 20;
-static void *KDF1_SHA1(const void *in, size_t inlen, void *out, size_t *outlen)
-	{
-#ifndef OPENSSL_NO_SHA
-	if (*outlen < SHA_DIGEST_LENGTH)
-		return NULL;
-	else
-		*outlen = SHA_DIGEST_LENGTH;
-	return SHA1(in, inlen, out);
-#else
-	return NULL;
-#endif
-	}
-
-
-static int test_ecdh_curve(int nid, const char *text, BN_CTX *ctx, BIO *out)
-	{
-	EC_KEY *a=NULL;
-	EC_KEY *b=NULL;
-	BIGNUM *x_a=NULL, *y_a=NULL,
-	       *x_b=NULL, *y_b=NULL;
-	char buf[12];
-	unsigned char *abuf=NULL,*bbuf=NULL;
-	int i,alen,blen,aout,bout,ret=0;
-	const EC_GROUP *group;
-
-	a = EC_KEY_new_by_curve_name(nid);
-	b = EC_KEY_new_by_curve_name(nid);
-	if (a == NULL || b == NULL)
-		goto err;
-
-	group = EC_KEY_get0_group(a);
-
-	if ((x_a=BN_new()) == NULL) goto err;
-	if ((y_a=BN_new()) == NULL) goto err;
-	if ((x_b=BN_new()) == NULL) goto err;
-	if ((y_b=BN_new()) == NULL) goto err;
-
-	BIO_puts(out,"Testing key generation with ");
-	BIO_puts(out,text);
-#ifdef NOISY
-	BIO_puts(out,"\n");
-#else
-	BIO_flush(out);
-#endif
-
-	if (!EC_KEY_generate_key(a)) goto err;
-	
-	if (EC_METHOD_get_field_type(EC_GROUP_method_of(group)) == NID_X9_62_prime_field) 
-		{
-		if (!EC_POINT_get_affine_coordinates_GFp(group,
-			EC_KEY_get0_public_key(a), x_a, y_a, ctx)) goto err;
-		}
-	else
-		{
-		if (!EC_POINT_get_affine_coordinates_GF2m(group,
-			EC_KEY_get0_public_key(a), x_a, y_a, ctx)) goto err;
-		}
-#ifdef NOISY
-	BIO_puts(out,"  pri 1=");
-	BN_print(out,a->priv_key);
-	BIO_puts(out,"\n  pub 1=");
-	BN_print(out,x_a);
-	BIO_puts(out,",");
-	BN_print(out,y_a);
-	BIO_puts(out,"\n");
-#else
-	BIO_printf(out," .");
-	BIO_flush(out);
-#endif
-
-	if (!EC_KEY_generate_key(b)) goto err;
-
-	if (EC_METHOD_get_field_type(EC_GROUP_method_of(group)) == NID_X9_62_prime_field) 
-		{
-		if (!EC_POINT_get_affine_coordinates_GFp(group, 
-			EC_KEY_get0_public_key(b), x_b, y_b, ctx)) goto err;
-		}
-	else
-		{
-		if (!EC_POINT_get_affine_coordinates_GF2m(group, 
-			EC_KEY_get0_public_key(b), x_b, y_b, ctx)) goto err;
-		}
-
-#ifdef NOISY
-	BIO_puts(out,"  pri 2=");
-	BN_print(out,b->priv_key);
-	BIO_puts(out,"\n  pub 2=");
-	BN_print(out,x_b);
-	BIO_puts(out,",");
-	BN_print(out,y_b);
-	BIO_puts(out,"\n");
-#else
-	BIO_printf(out,".");
-	BIO_flush(out);
-#endif
-
-	alen=KDF1_SHA1_len;
-	abuf=(unsigned char *)OPENSSL_malloc(alen);
-	aout=ECDH_compute_key(abuf,alen,EC_KEY_get0_public_key(b),a,KDF1_SHA1);
-
-#ifdef NOISY
-	BIO_puts(out,"  key1 =");
-	for (i=0; i<aout; i++)
-		{
-		sprintf(buf,"%02X",abuf[i]);
-		BIO_puts(out,buf);
-		}
-	BIO_puts(out,"\n");
-#else
-	BIO_printf(out,".");
-	BIO_flush(out);
-#endif
-
-	blen=KDF1_SHA1_len;
-	bbuf=(unsigned char *)OPENSSL_malloc(blen);
-	bout=ECDH_compute_key(bbuf,blen,EC_KEY_get0_public_key(a),b,KDF1_SHA1);
-
-#ifdef NOISY
-	BIO_puts(out,"  key2 =");
-	for (i=0; i<bout; i++)
-		{
-		sprintf(buf,"%02X",bbuf[i]);
-		BIO_puts(out,buf);
-		}
-	BIO_puts(out,"\n");
-#else
-	BIO_printf(out,".");
-	BIO_flush(out);
-#endif
-
-	if ((aout < 4) || (bout != aout) || (memcmp(abuf,bbuf,aout) != 0))
-		{
-#ifndef NOISY
-		BIO_printf(out, " failed\n\n");
-		BIO_printf(out, "key a:\n");
-		BIO_printf(out, "private key: ");
-		BN_print(out, EC_KEY_get0_private_key(a));
-		BIO_printf(out, "\n");
-		BIO_printf(out, "public key (x,y): ");
-		BN_print(out, x_a);
-		BIO_printf(out, ",");
-		BN_print(out, y_a);
-		BIO_printf(out, "\nkey b:\n");
-		BIO_printf(out, "private key: ");
-		BN_print(out, EC_KEY_get0_private_key(b));
-		BIO_printf(out, "\n");
-		BIO_printf(out, "public key (x,y): ");
-		BN_print(out, x_b);
-		BIO_printf(out, ",");
-		BN_print(out, y_b);
-		BIO_printf(out, "\n");
-		BIO_printf(out, "generated key a: ");
-		for (i=0; i<bout; i++)
-			{
-			sprintf(buf, "%02X", bbuf[i]);
-			BIO_puts(out, buf);
-			}
-		BIO_printf(out, "\n");
-		BIO_printf(out, "generated key b: ");
-		for (i=0; i<aout; i++)
-			{
-			sprintf(buf, "%02X", abuf[i]);
-			BIO_puts(out,buf);
-			}
-		BIO_printf(out, "\n");
-#endif
-		fprintf(stderr,"Error in ECDH routines\n");
-		ret=0;
-		}
-	else
-		{
-#ifndef NOISY
-		BIO_printf(out, " ok\n");
-#endif
-		ret=1;
-		}
-err:
-	ERR_print_errors_fp(stderr);
-
-	if (abuf != NULL) OPENSSL_free(abuf);
-	if (bbuf != NULL) OPENSSL_free(bbuf);
-	if (x_a) BN_free(x_a);
-	if (y_a) BN_free(y_a);
-	if (x_b) BN_free(x_b);
-	if (y_b) BN_free(y_b);
-	if (b) EC_KEY_free(b);
-	if (a) EC_KEY_free(a);
-	return(ret);
-	}
-
-int main(int argc, char *argv[])
-	{
-	BN_CTX *ctx=NULL;
-	int ret=1;
-	BIO *out;
-
-	CRYPTO_malloc_debug_init();
-	CRYPTO_dbg_set_options(V_CRYPTO_MDEBUG_ALL);
-	CRYPTO_mem_ctrl(CRYPTO_MEM_CHECK_ON);
-
-#ifdef OPENSSL_SYS_WIN32
-	CRYPTO_malloc_init();
-#endif
-
-	RAND_seed(rnd_seed, sizeof rnd_seed);
-
-	out=BIO_new(BIO_s_file());
-	if (out == NULL) EXIT(1);
-	BIO_set_fp(out,stdout,BIO_NOCLOSE);
-
-	if ((ctx=BN_CTX_new()) == NULL) goto err;
-
-	/* NIST PRIME CURVES TESTS */
-	if (!test_ecdh_curve(NID_X9_62_prime192v1, "NIST Prime-Curve P-192", ctx, out)) goto err;
-	if (!test_ecdh_curve(NID_secp224r1, "NIST Prime-Curve P-224", ctx, out)) goto err;
-	if (!test_ecdh_curve(NID_X9_62_prime256v1, "NIST Prime-Curve P-256", ctx, out)) goto err;
-	if (!test_ecdh_curve(NID_secp384r1, "NIST Prime-Curve P-384", ctx, out)) goto err;
-	if (!test_ecdh_curve(NID_secp521r1, "NIST Prime-Curve P-521", ctx, out)) goto err;
-	/* NIST BINARY CURVES TESTS */
-	if (!test_ecdh_curve(NID_sect163k1, "NIST Binary-Curve K-163", ctx, out)) goto err;
-	if (!test_ecdh_curve(NID_sect163r2, "NIST Binary-Curve B-163", ctx, out)) goto err;
-	if (!test_ecdh_curve(NID_sect233k1, "NIST Binary-Curve K-233", ctx, out)) goto err;
-	if (!test_ecdh_curve(NID_sect233r1, "NIST Binary-Curve B-233", ctx, out)) goto err;
-	if (!test_ecdh_curve(NID_sect283k1, "NIST Binary-Curve K-283", ctx, out)) goto err;
-	if (!test_ecdh_curve(NID_sect283r1, "NIST Binary-Curve B-283", ctx, out)) goto err;
-	if (!test_ecdh_curve(NID_sect409k1, "NIST Binary-Curve K-409", ctx, out)) goto err;
-	if (!test_ecdh_curve(NID_sect409r1, "NIST Binary-Curve B-409", ctx, out)) goto err;
-	if (!test_ecdh_curve(NID_sect571k1, "NIST Binary-Curve K-571", ctx, out)) goto err;
-	if (!test_ecdh_curve(NID_sect571r1, "NIST Binary-Curve B-571", ctx, out)) goto err;
-
-	ret = 0;
-
-err:
-	ERR_print_errors_fp(stderr);
-	if (ctx) BN_CTX_free(ctx);
-	BIO_free(out);
-	CRYPTO_cleanup_all_ex_data();
-	ERR_remove_state(0);
-	CRYPTO_mem_leaks_fp(stderr);
-	EXIT(ret);
-	return(ret);
-	}
-
-#if 0
-static void MS_CALLBACK cb(int p, int n, void *arg)
-	{
-	char c='*';
-
-	if (p == 0) c='.';
-	if (p == 1) c='+';
-	if (p == 2) c='*';
-	if (p == 3) c='\n';
-	BIO_write((BIO *)arg,&c,1);
-	(void)BIO_flush((BIO *)arg);
-#ifdef LINT
-	p=n;
-#endif
-	}
-#endif
-#endif
diff --git a/crypto/openssl/crypto/ecdh/ech_err.c b/crypto/openssl/crypto/ecdh/ech_err.c
deleted file mode 100644
index 4d2ede75bd37..000000000000
--- a/crypto/openssl/crypto/ecdh/ech_err.c
+++ /dev/null
@@ -1,98 +0,0 @@
-/* crypto/ecdh/ech_err.c */
-/* ====================================================================
- * Copyright (c) 1999-2005 The OpenSSL Project.  All rights reserved.
- *
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions
- * are met:
- *
- * 1. Redistributions of source code must retain the above copyright
- *    notice, this list of conditions and the following disclaimer. 
- *
- * 2. Redistributions in binary form must reproduce the above copyright
- *    notice, this list of conditions and the following disclaimer in
- *    the documentation and/or other materials provided with the
- *    distribution.
- *
- * 3. All advertising materials mentioning features or use of this
- *    software must display the following acknowledgment:
- *    "This product includes software developed by the OpenSSL Project
- *    for use in the OpenSSL Toolkit. (http://www.OpenSSL.org/)"
- *
- * 4. The names "OpenSSL Toolkit" and "OpenSSL Project" must not be used to
- *    endorse or promote products derived from this software without
- *    prior written permission. For written permission, please contact
- *    openssl-core@OpenSSL.org.
- *
- * 5. Products derived from this software may not be called "OpenSSL"
- *    nor may "OpenSSL" appear in their names without prior written
- *    permission of the OpenSSL Project.
- *
- * 6. Redistributions of any form whatsoever must retain the following
- *    acknowledgment:
- *    "This product includes software developed by the OpenSSL Project
- *    for use in the OpenSSL Toolkit (http://www.OpenSSL.org/)"
- *
- * THIS SOFTWARE IS PROVIDED BY THE OpenSSL PROJECT ``AS IS'' AND ANY
- * EXPRESSED OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
- * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR
- * PURPOSE ARE DISCLAIMED.  IN NO EVENT SHALL THE OpenSSL PROJECT OR
- * ITS CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
- * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
- * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
- * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
- * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
- * STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
- * ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED
- * OF THE POSSIBILITY OF SUCH DAMAGE.
- * ====================================================================
- *
- * This product includes cryptographic software written by Eric Young
- * (eay@cryptsoft.com).  This product includes software written by Tim
- * Hudson (tjh@cryptsoft.com).
- *
- */
-
-/* NOTE: this file was auto generated by the mkerr.pl script: any changes
- * made to it will be overwritten when the script next updates this file,
- * only reason strings will be preserved.
- */
-
-#include <stdio.h>
-#include <openssl/err.h>
-#include <openssl/ecdh.h>
-
-/* BEGIN ERROR CODES */
-#ifndef OPENSSL_NO_ERR
-
-#define ERR_FUNC(func) ERR_PACK(ERR_LIB_ECDH,func,0)
-#define ERR_REASON(reason) ERR_PACK(ERR_LIB_ECDH,0,reason)
-
-static ERR_STRING_DATA ECDH_str_functs[]=
-	{
-{ERR_FUNC(ECDH_F_ECDH_COMPUTE_KEY),	"ECDH_compute_key"},
-{ERR_FUNC(ECDH_F_ECDH_DATA_NEW_METHOD),	"ECDH_DATA_NEW_METHOD"},
-{0,NULL}
-	};
-
-static ERR_STRING_DATA ECDH_str_reasons[]=
-	{
-{ERR_REASON(ECDH_R_KDF_FAILED)           ,"KDF failed"},
-{ERR_REASON(ECDH_R_NO_PRIVATE_VALUE)     ,"no private value"},
-{ERR_REASON(ECDH_R_POINT_ARITHMETIC_FAILURE),"point arithmetic failure"},
-{0,NULL}
-	};
-
-#endif
-
-void ERR_load_ECDH_strings(void)
-	{
-#ifndef OPENSSL_NO_ERR
-
-	if (ERR_func_error_string(ECDH_str_functs[0].error) == NULL)
-		{
-		ERR_load_strings(0,ECDH_str_functs);
-		ERR_load_strings(0,ECDH_str_reasons);
-		}
-#endif
-	}
diff --git a/crypto/openssl/crypto/ecdh/ech_key.c b/crypto/openssl/crypto/ecdh/ech_key.c
deleted file mode 100644
index f44da9298b5e..000000000000
--- a/crypto/openssl/crypto/ecdh/ech_key.c
+++ /dev/null
@@ -1,83 +0,0 @@
-/* crypto/ecdh/ecdh_key.c */
-/* ====================================================================
- * Copyright 2002 Sun Microsystems, Inc. ALL RIGHTS RESERVED.
- *
- * The Elliptic Curve Public-Key Crypto Library (ECC Code) included
- * herein is developed by SUN MICROSYSTEMS, INC., and is contributed
- * to the OpenSSL project.
- *
- * The ECC Code is licensed pursuant to the OpenSSL open source
- * license provided below.
- *
- * The ECDH software is originally written by Douglas Stebila of
- * Sun Microsystems Laboratories.
- *
- */
-/* ====================================================================
- * Copyright (c) 1998-2003 The OpenSSL Project.  All rights reserved.
- *
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions
- * are met:
- *
- * 1. Redistributions of source code must retain the above copyright
- *    notice, this list of conditions and the following disclaimer. 
- *
- * 2. Redistributions in binary form must reproduce the above copyright
- *    notice, this list of conditions and the following disclaimer in
- *    the documentation and/or other materials provided with the
- *    distribution.
- *
- * 3. All advertising materials mentioning features or use of this
- *    software must display the following acknowledgment:
- *    "This product includes software developed by the OpenSSL Project
- *    for use in the OpenSSL Toolkit. (http://www.OpenSSL.org/)"
- *
- * 4. The names "OpenSSL Toolkit" and "OpenSSL Project" must not be used to
- *    endorse or promote products derived from this software without
- *    prior written permission. For written permission, please contact
- *    openssl-core@OpenSSL.org.
- *
- * 5. Products derived from this software may not be called "OpenSSL"
- *    nor may "OpenSSL" appear in their names without prior written
- *    permission of the OpenSSL Project.
- *
- * 6. Redistributions of any form whatsoever must retain the following
- *    acknowledgment:
- *    "This product includes software developed by the OpenSSL Project
- *    for use in the OpenSSL Toolkit (http://www.OpenSSL.org/)"
- *
- * THIS SOFTWARE IS PROVIDED BY THE OpenSSL PROJECT ``AS IS'' AND ANY
- * EXPRESSED OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
- * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR
- * PURPOSE ARE DISCLAIMED.  IN NO EVENT SHALL THE OpenSSL PROJECT OR
- * ITS CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
- * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
- * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
- * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
- * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
- * STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
- * ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED
- * OF THE POSSIBILITY OF SUCH DAMAGE.
- * ====================================================================
- *
- * This product includes cryptographic software written by Eric Young
- * (eay@cryptsoft.com).  This product includes software written by Tim
- * Hudson (tjh@cryptsoft.com).
- *
- */
-
-#include "ech_locl.h"
-#ifndef OPENSSL_NO_ENGINE
-#include <openssl/engine.h>
-#endif
-
-int ECDH_compute_key(void *out, size_t outlen, const EC_POINT *pub_key,
-	EC_KEY *eckey,
-	void *(*KDF)(const void *in, size_t inlen, void *out, size_t *outlen))
-{
-	ECDH_DATA *ecdh = ecdh_check(eckey);
-	if (ecdh == NULL)
-		return 0;
-	return ecdh->meth->compute_key(out, outlen, pub_key, eckey, KDF);
-}
diff --git a/crypto/openssl/crypto/ecdh/ech_lib.c b/crypto/openssl/crypto/ecdh/ech_lib.c
deleted file mode 100644
index e89b1d477287..000000000000
--- a/crypto/openssl/crypto/ecdh/ech_lib.c
+++ /dev/null
@@ -1,247 +0,0 @@
-/* crypto/ecdh/ech_lib.c */
-/* ====================================================================
- * Copyright 2002 Sun Microsystems, Inc. ALL RIGHTS RESERVED.
- *
- * The Elliptic Curve Public-Key Crypto Library (ECC Code) included
- * herein is developed by SUN MICROSYSTEMS, INC., and is contributed
- * to the OpenSSL project.
- *
- * The ECC Code is licensed pursuant to the OpenSSL open source
- * license provided below.
- *
- * The ECDH software is originally written by Douglas Stebila of
- * Sun Microsystems Laboratories.
- *
- */
-/* ====================================================================
- * Copyright (c) 1998-2003 The OpenSSL Project.  All rights reserved.
- *
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions
- * are met:
- *
- * 1. Redistributions of source code must retain the above copyright
- *    notice, this list of conditions and the following disclaimer. 
- *
- * 2. Redistributions in binary form must reproduce the above copyright
- *    notice, this list of conditions and the following disclaimer in
- *    the documentation and/or other materials provided with the
- *    distribution.
- *
- * 3. All advertising materials mentioning features or use of this
- *    software must display the following acknowledgment:
- *    "This product includes software developed by the OpenSSL Project
- *    for use in the OpenSSL Toolkit. (http://www.OpenSSL.org/)"
- *
- * 4. The names "OpenSSL Toolkit" and "OpenSSL Project" must not be used to
- *    endorse or promote products derived from this software without
- *    prior written permission. For written permission, please contact
- *    openssl-core@OpenSSL.org.
- *
- * 5. Products derived from this software may not be called "OpenSSL"
- *    nor may "OpenSSL" appear in their names without prior written
- *    permission of the OpenSSL Project.
- *
- * 6. Redistributions of any form whatsoever must retain the following
- *    acknowledgment:
- *    "This product includes software developed by the OpenSSL Project
- *    for use in the OpenSSL Toolkit (http://www.OpenSSL.org/)"
- *
- * THIS SOFTWARE IS PROVIDED BY THE OpenSSL PROJECT ``AS IS'' AND ANY
- * EXPRESSED OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
- * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR
- * PURPOSE ARE DISCLAIMED.  IN NO EVENT SHALL THE OpenSSL PROJECT OR
- * ITS CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
- * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
- * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
- * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
- * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
- * STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
- * ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED
- * OF THE POSSIBILITY OF SUCH DAMAGE.
- * ====================================================================
- *
- * This product includes cryptographic software written by Eric Young
- * (eay@cryptsoft.com).  This product includes software written by Tim
- * Hudson (tjh@cryptsoft.com).
- *
- */
-
-#include "ech_locl.h"
-#include <string.h>
-#ifndef OPENSSL_NO_ENGINE
-#include <openssl/engine.h>
-#endif
-#include <openssl/err.h>
-
-const char ECDH_version[]="ECDH" OPENSSL_VERSION_PTEXT;
-
-static const ECDH_METHOD *default_ECDH_method = NULL;
-
-static void *ecdh_data_new(void);
-static void *ecdh_data_dup(void *);
-static void  ecdh_data_free(void *);
-
-void ECDH_set_default_method(const ECDH_METHOD *meth)
-	{
-	default_ECDH_method = meth;
-	}
-
-const ECDH_METHOD *ECDH_get_default_method(void)
-	{
-	if(!default_ECDH_method) 
-		default_ECDH_method = ECDH_OpenSSL();
-	return default_ECDH_method;
-	}
-
-int ECDH_set_method(EC_KEY *eckey, const ECDH_METHOD *meth)
-	{
-	const ECDH_METHOD *mtmp;
-	ECDH_DATA *ecdh;
-
-	ecdh = ecdh_check(eckey);
-
-	if (ecdh == NULL)
-		return 0;
-
-        mtmp = ecdh->meth;
-#if 0
-        if (mtmp->finish)
-		mtmp->finish(eckey);
-#endif
-#ifndef OPENSSL_NO_ENGINE
-	if (ecdh->engine)
-		{
-		ENGINE_finish(ecdh->engine);
-		ecdh->engine = NULL;
-		}
-#endif
-        ecdh->meth = meth;
-#if 0
-        if (meth->init) 
-		meth->init(eckey);
-#endif
-        return 1;
-	}
-
-static ECDH_DATA *ECDH_DATA_new_method(ENGINE *engine)
-	{
-	ECDH_DATA *ret;
-
-	ret=(ECDH_DATA *)OPENSSL_malloc(sizeof(ECDH_DATA));
-	if (ret == NULL)
-		{
-		ECDHerr(ECDH_F_ECDH_DATA_NEW_METHOD, ERR_R_MALLOC_FAILURE);
-		return(NULL);
-		}
-
-	ret->init = NULL;
-
-	ret->meth = ECDH_get_default_method();
-	ret->engine = engine;
-#ifndef OPENSSL_NO_ENGINE
-	if (!ret->engine)
-		ret->engine = ENGINE_get_default_ECDH();
-	if (ret->engine)
-		{
-		ret->meth = ENGINE_get_ECDH(ret->engine);
-		if (!ret->meth)
-			{
-			ECDHerr(ECDH_F_ECDH_DATA_NEW_METHOD, ERR_R_ENGINE_LIB);
-			ENGINE_finish(ret->engine);
-			OPENSSL_free(ret);
-			return NULL;
-			}
-		}
-#endif
-
-	ret->flags = ret->meth->flags;
-	CRYPTO_new_ex_data(CRYPTO_EX_INDEX_ECDH, ret, &ret->ex_data);
-#if 0
-	if ((ret->meth->init != NULL) && !ret->meth->init(ret))
-		{
-		CRYPTO_free_ex_data(CRYPTO_EX_INDEX_ECDH, ret, &ret->ex_data);
-		OPENSSL_free(ret);
-		ret=NULL;
-		}
-#endif	
-	return(ret);
-	}
-
-static void *ecdh_data_new(void)
-	{
-	return (void *)ECDH_DATA_new_method(NULL);
-	}
-
-static void *ecdh_data_dup(void *data)
-{
-	ECDH_DATA *r = (ECDH_DATA *)data;
-
-	/* XXX: dummy operation */
-	if (r == NULL)
-		return NULL;
-
-	return (void *)ecdh_data_new();
-}
-
-void ecdh_data_free(void *data)
-	{
-	ECDH_DATA *r = (ECDH_DATA *)data;
-
-#ifndef OPENSSL_NO_ENGINE
-	if (r->engine)
-		ENGINE_finish(r->engine);
-#endif
-
-	CRYPTO_free_ex_data(CRYPTO_EX_INDEX_ECDH, r, &r->ex_data);
-
-	OPENSSL_cleanse((void *)r, sizeof(ECDH_DATA));
-
-	OPENSSL_free(r);
-	}
-
-ECDH_DATA *ecdh_check(EC_KEY *key)
-	{
-	ECDH_DATA *ecdh_data;
- 
-	void *data = EC_KEY_get_key_method_data(key, ecdh_data_dup,
-					ecdh_data_free, ecdh_data_free);
-	if (data == NULL)
-	{
-		ecdh_data = (ECDH_DATA *)ecdh_data_new();
-		if (ecdh_data == NULL)
-			return NULL;
-		EC_KEY_insert_key_method_data(key, (void *)ecdh_data,
-			ecdh_data_dup, ecdh_data_free, ecdh_data_free);
-	}
-	else
-		ecdh_data = (ECDH_DATA *)data;
-	
-
-	return ecdh_data;
-	}
-
-int ECDH_get_ex_new_index(long argl, void *argp, CRYPTO_EX_new *new_func,
-	     CRYPTO_EX_dup *dup_func, CRYPTO_EX_free *free_func)
-	{
-	return CRYPTO_get_ex_new_index(CRYPTO_EX_INDEX_ECDH, argl, argp,
-				new_func, dup_func, free_func);
-	}
-
-int ECDH_set_ex_data(EC_KEY *d, int idx, void *arg)
-	{
-	ECDH_DATA *ecdh;
-	ecdh = ecdh_check(d);
-	if (ecdh == NULL)
-		return 0;
-	return(CRYPTO_set_ex_data(&ecdh->ex_data,idx,arg));
-	}
-
-void *ECDH_get_ex_data(EC_KEY *d, int idx)
-	{
-	ECDH_DATA *ecdh;
-	ecdh = ecdh_check(d);
-	if (ecdh == NULL)
-		return NULL;
-	return(CRYPTO_get_ex_data(&ecdh->ex_data,idx));
-	}
diff --git a/crypto/openssl/crypto/ecdh/ech_locl.h b/crypto/openssl/crypto/ecdh/ech_locl.h
deleted file mode 100644
index f658526a7e3a..000000000000
--- a/crypto/openssl/crypto/ecdh/ech_locl.h
+++ /dev/null
@@ -1,94 +0,0 @@
-/* crypto/ecdh/ech_locl.h */
-/* ====================================================================
- * Copyright (c) 2000-2005 The OpenSSL Project.  All rights reserved.
- *
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions
- * are met:
- *
- * 1. Redistributions of source code must retain the above copyright
- *    notice, this list of conditions and the following disclaimer. 
- *
- * 2. Redistributions in binary form must reproduce the above copyright
- *    notice, this list of conditions and the following disclaimer in
- *    the documentation and/or other materials provided with the
- *    distribution.
- *
- * 3. All advertising materials mentioning features or use of this
- *    software must display the following acknowledgment:
- *    "This product includes software developed by the OpenSSL Project
- *    for use in the OpenSSL Toolkit. (http://www.OpenSSL.org/)"
- *
- * 4. The names "OpenSSL Toolkit" and "OpenSSL Project" must not be used to
- *    endorse or promote products derived from this software without
- *    prior written permission. For written permission, please contact
- *    licensing@OpenSSL.org.
- *
- * 5. Products derived from this software may not be called "OpenSSL"
- *    nor may "OpenSSL" appear in their names without prior written
- *    permission of the OpenSSL Project.
- *
- * 6. Redistributions of any form whatsoever must retain the following
- *    acknowledgment:
- *    "This product includes software developed by the OpenSSL Project
- *    for use in the OpenSSL Toolkit (http://www.OpenSSL.org/)"
- *
- * THIS SOFTWARE IS PROVIDED BY THE OpenSSL PROJECT ``AS IS'' AND ANY
- * EXPRESSED OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
- * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR
- * PURPOSE ARE DISCLAIMED.  IN NO EVENT SHALL THE OpenSSL PROJECT OR
- * ITS CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
- * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
- * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
- * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
- * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
- * STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
- * ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED
- * OF THE POSSIBILITY OF SUCH DAMAGE.
- * ====================================================================
- *
- * This product includes cryptographic software written by Eric Young
- * (eay@cryptsoft.com).  This product includes software written by Tim
- * Hudson (tjh@cryptsoft.com).
- *
- */
-
-#ifndef HEADER_ECH_LOCL_H
-#define HEADER_ECH_LOCL_H
-
-#include <openssl/ecdh.h>
-
-#ifdef  __cplusplus
-extern "C" {
-#endif
-
-struct ecdh_method 
-	{
-	const char *name;
-	int (*compute_key)(void *key, size_t outlen, const EC_POINT *pub_key, EC_KEY *ecdh,
-	                   void *(*KDF)(const void *in, size_t inlen, void *out, size_t *outlen));
-#if 0
-	int (*init)(EC_KEY *eckey);
-	int (*finish)(EC_KEY *eckey);
-#endif
-	int flags;
-	char *app_data;
-	};
-
-typedef struct ecdh_data_st {
-	/* EC_KEY_METH_DATA part */
-	int (*init)(EC_KEY *);
-	/* method specific part */
-	ENGINE	*engine;
-	int	flags;
-	const ECDH_METHOD *meth;
-	CRYPTO_EX_DATA ex_data;
-} ECDH_DATA;
-
-ECDH_DATA *ecdh_check(EC_KEY *);
-
-#ifdef  __cplusplus
-}
-#endif
-
-#endif /* HEADER_ECH_LOCL_H */
diff --git a/crypto/openssl/crypto/ecdh/ech_ossl.c b/crypto/openssl/crypto/ecdh/ech_ossl.c
deleted file mode 100644
index 2a40ff12dfa8..000000000000
--- a/crypto/openssl/crypto/ecdh/ech_ossl.c
+++ /dev/null
@@ -1,213 +0,0 @@
-/* crypto/ecdh/ech_ossl.c */
-/* ====================================================================
- * Copyright 2002 Sun Microsystems, Inc. ALL RIGHTS RESERVED.
- *
- * The Elliptic Curve Public-Key Crypto Library (ECC Code) included
- * herein is developed by SUN MICROSYSTEMS, INC., and is contributed
- * to the OpenSSL project.
- *
- * The ECC Code is licensed pursuant to the OpenSSL open source
- * license provided below.
- *
- * The ECDH software is originally written by Douglas Stebila of
- * Sun Microsystems Laboratories.
- *
- */
-/* ====================================================================
- * Copyright (c) 1998-2003 The OpenSSL Project.  All rights reserved.
- *
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions
- * are met:
- *
- * 1. Redistributions of source code must retain the above copyright
- *    notice, this list of conditions and the following disclaimer. 
- *
- * 2. Redistributions in binary form must reproduce the above copyright
- *    notice, this list of conditions and the following disclaimer in
- *    the documentation and/or other materials provided with the
- *    distribution.
- *
- * 3. All advertising materials mentioning features or use of this
- *    software must display the following acknowledgment:
- *    "This product includes software developed by the OpenSSL Project
- *    for use in the OpenSSL Toolkit. (http://www.OpenSSL.org/)"
- *
- * 4. The names "OpenSSL Toolkit" and "OpenSSL Project" must not be used to
- *    endorse or promote products derived from this software without
- *    prior written permission. For written permission, please contact
- *    openssl-core@OpenSSL.org.
- *
- * 5. Products derived from this software may not be called "OpenSSL"
- *    nor may "OpenSSL" appear in their names without prior written
- *    permission of the OpenSSL Project.
- *
- * 6. Redistributions of any form whatsoever must retain the following
- *    acknowledgment:
- *    "This product includes software developed by the OpenSSL Project
- *    for use in the OpenSSL Toolkit (http://www.OpenSSL.org/)"
- *
- * THIS SOFTWARE IS PROVIDED BY THE OpenSSL PROJECT ``AS IS'' AND ANY
- * EXPRESSED OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
- * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR
- * PURPOSE ARE DISCLAIMED.  IN NO EVENT SHALL THE OpenSSL PROJECT OR
- * ITS CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
- * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
- * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
- * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
- * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
- * STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
- * ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED
- * OF THE POSSIBILITY OF SUCH DAMAGE.
- * ====================================================================
- *
- * This product includes cryptographic software written by Eric Young
- * (eay@cryptsoft.com).  This product includes software written by Tim
- * Hudson (tjh@cryptsoft.com).
- *
- */
-
-
-#include <string.h>
-#include <limits.h>
-
-#include "cryptlib.h"
-
-#include "ech_locl.h"
-#include <openssl/err.h>
-#include <openssl/sha.h>
-#include <openssl/obj_mac.h>
-#include <openssl/bn.h>
-
-static int ecdh_compute_key(void *out, size_t len, const EC_POINT *pub_key,
-	EC_KEY *ecdh, 
-	void *(*KDF)(const void *in, size_t inlen, void *out, size_t *outlen));
-
-static ECDH_METHOD openssl_ecdh_meth = {
-	"OpenSSL ECDH method",
-	ecdh_compute_key,
-#if 0
-	NULL, /* init     */
-	NULL, /* finish   */
-#endif
-	0,    /* flags    */
-	NULL  /* app_data */
-};
-
-const ECDH_METHOD *ECDH_OpenSSL(void)
-	{
-	return &openssl_ecdh_meth;
-	}
-
-
-/* This implementation is based on the following primitives in the IEEE 1363 standard:
- *  - ECKAS-DH1
- *  - ECSVDP-DH
- * Finally an optional KDF is applied.
- */
-static int ecdh_compute_key(void *out, size_t outlen, const EC_POINT *pub_key,
-	EC_KEY *ecdh,
-	void *(*KDF)(const void *in, size_t inlen, void *out, size_t *outlen))
-	{
-	BN_CTX *ctx;
-	EC_POINT *tmp=NULL;
-	BIGNUM *x=NULL, *y=NULL;
-	const BIGNUM *priv_key;
-	const EC_GROUP* group;
-	int ret= -1;
-	size_t buflen, len;
-	unsigned char *buf=NULL;
-
-	if (outlen > INT_MAX)
-		{
-		ECDHerr(ECDH_F_ECDH_COMPUTE_KEY,ERR_R_MALLOC_FAILURE); /* sort of, anyway */
-		return -1;
-		}
-
-	if ((ctx = BN_CTX_new()) == NULL) goto err;
-	BN_CTX_start(ctx);
-	x = BN_CTX_get(ctx);
-	y = BN_CTX_get(ctx);
-	
-	priv_key = EC_KEY_get0_private_key(ecdh);
-	if (priv_key == NULL)
-		{
-		ECDHerr(ECDH_F_ECDH_COMPUTE_KEY,ECDH_R_NO_PRIVATE_VALUE);
-		goto err;
-		}
-
-	group = EC_KEY_get0_group(ecdh);
-	if ((tmp=EC_POINT_new(group)) == NULL)
-		{
-		ECDHerr(ECDH_F_ECDH_COMPUTE_KEY,ERR_R_MALLOC_FAILURE);
-		goto err;
-		}
-
-	if (!EC_POINT_mul(group, tmp, NULL, pub_key, priv_key, ctx)) 
-		{
-		ECDHerr(ECDH_F_ECDH_COMPUTE_KEY,ECDH_R_POINT_ARITHMETIC_FAILURE);
-		goto err;
-		}
-		
-	if (EC_METHOD_get_field_type(EC_GROUP_method_of(group)) == NID_X9_62_prime_field) 
-		{
-		if (!EC_POINT_get_affine_coordinates_GFp(group, tmp, x, y, ctx)) 
-			{
-			ECDHerr(ECDH_F_ECDH_COMPUTE_KEY,ECDH_R_POINT_ARITHMETIC_FAILURE);
-			goto err;
-			}
-		}
-	else
-		{
-		if (!EC_POINT_get_affine_coordinates_GF2m(group, tmp, x, y, ctx)) 
-			{
-			ECDHerr(ECDH_F_ECDH_COMPUTE_KEY,ECDH_R_POINT_ARITHMETIC_FAILURE);
-			goto err;
-			}
-		}
-
-	buflen = (EC_GROUP_get_degree(group) + 7)/8;
-	len = BN_num_bytes(x);
-	if (len > buflen)
-		{
-		ECDHerr(ECDH_F_ECDH_COMPUTE_KEY,ERR_R_INTERNAL_ERROR);
-		goto err;
-		}
-	if ((buf = OPENSSL_malloc(buflen)) == NULL)
-		{
-		ECDHerr(ECDH_F_ECDH_COMPUTE_KEY,ERR_R_MALLOC_FAILURE);
-		goto err;
-		}
-	
-	memset(buf, 0, buflen - len);
-	if (len != (size_t)BN_bn2bin(x, buf + buflen - len))
-		{
-		ECDHerr(ECDH_F_ECDH_COMPUTE_KEY,ERR_R_BN_LIB);
-		goto err;
-		}
-
-	if (KDF != 0)
-		{
-		if (KDF(buf, buflen, out, &outlen) == NULL)
-			{
-			ECDHerr(ECDH_F_ECDH_COMPUTE_KEY,ECDH_R_KDF_FAILED);
-			goto err;
-			}
-		ret = outlen;
-		}
-	else
-		{
-		/* no KDF, just copy as much as we can */
-		if (outlen > buflen)
-			outlen = buflen;
-		memcpy(out, buf, outlen);
-		ret = outlen;
-		}
-	
-err:
-	if (tmp) EC_POINT_free(tmp);
-	if (ctx) BN_CTX_end(ctx);
-	if (ctx) BN_CTX_free(ctx);
-	if (buf) OPENSSL_free(buf);
-	return(ret);
-	}
diff --git a/crypto/openssl/crypto/ecdsa/Makefile b/crypto/openssl/crypto/ecdsa/Makefile
deleted file mode 100644
index 16a93cd3ae83..000000000000
--- a/crypto/openssl/crypto/ecdsa/Makefile
+++ /dev/null
@@ -1,125 +0,0 @@
-#
-# crypto/ecdsa/Makefile
-#
-
-DIR=	ecdsa
-TOP=	../..
-CC=	cc
-INCLUDES= -I.. -I$(TOP) -I../../include
-CFLAG=-g -Wall
-MAKEFILE=	Makefile
-AR=		ar r
-
-CFLAGS= $(INCLUDES) $(CFLAG)
-
-GENERAL=Makefile
-TEST=ecdsatest.c
-APPS=
-
-LIB=$(TOP)/libcrypto.a
-LIBSRC=	ecs_lib.c ecs_asn1.c ecs_ossl.c ecs_sign.c ecs_vrf.c ecs_err.c
-
-LIBOBJ=	ecs_lib.o ecs_asn1.o ecs_ossl.o ecs_sign.o ecs_vrf.o ecs_err.o
-
-SRC= $(LIBSRC)
-
-EXHEADER= ecdsa.h
-HEADER=	ecs_locl.h $(EXHEADER)
-
-ALL=    $(GENERAL) $(SRC) $(HEADER)
-
-top:
-	(cd ../..; $(MAKE) DIRS=crypto SDIRS=$(DIR) sub_all)
-
-all:	lib
-
-lib:	$(LIBOBJ)
-	$(AR) $(LIB) $(LIBOBJ)
-	$(RANLIB) $(LIB) || echo Never mind.
-	@touch lib
-
-files:
-	$(PERL) $(TOP)/util/files.pl Makefile >> $(TOP)/MINFO
-
-links:
-	@$(PERL) $(TOP)/util/mklink.pl ../../include/openssl $(EXHEADER)
-	@$(PERL) $(TOP)/util/mklink.pl ../../test $(TEST)
-	@$(PERL) $(TOP)/util/mklink.pl ../../apps $(APPS)
-
-install:
-	@[ -n "$(INSTALLTOP)" ] # should be set by top Makefile...
-	@headerlist="$(EXHEADER)"; for i in $$headerlist; \
-	do  \
-	(cp $$i $(INSTALL_PREFIX)$(INSTALLTOP)/include/openssl/$$i; \
-	chmod 644 $(INSTALL_PREFIX)$(INSTALLTOP)/include/openssl/$$i ); \
-	done;
-
-tags:
-	ctags $(SRC)
-
-tests:
-
-lint:
-	lint -DLINT $(INCLUDES) $(SRC)>fluff
-
-depend:
-	@[ -n "$(MAKEDEPEND)" ] # should be set by upper Makefile...
-	$(MAKEDEPEND) -- $(CFLAG) $(INCLUDES) $(DEPFLAG) -- $(PROGS) $(LIBSRC)
-
-dclean:
-	$(PERL) -pe 'if (/^# DO NOT DELETE THIS LINE/) {print; exit(0);}' $(MAKEFILE) >Makefile.new
-	mv -f Makefile.new $(MAKEFILE)
-
-clean:
-	rm -f *.o */*.o *.obj lib tags core .pure .nfs* *.old *.bak fluff
-
-# DO NOT DELETE THIS LINE -- make depend depends on it.
-
-ecs_asn1.o: ../../include/openssl/asn1.h ../../include/openssl/asn1t.h
-ecs_asn1.o: ../../include/openssl/bio.h ../../include/openssl/crypto.h
-ecs_asn1.o: ../../include/openssl/e_os2.h ../../include/openssl/ec.h
-ecs_asn1.o: ../../include/openssl/ecdsa.h ../../include/openssl/err.h
-ecs_asn1.o: ../../include/openssl/lhash.h ../../include/openssl/opensslconf.h
-ecs_asn1.o: ../../include/openssl/opensslv.h ../../include/openssl/ossl_typ.h
-ecs_asn1.o: ../../include/openssl/safestack.h ../../include/openssl/stack.h
-ecs_asn1.o: ../../include/openssl/symhacks.h ecs_asn1.c ecs_locl.h
-ecs_err.o: ../../include/openssl/asn1.h ../../include/openssl/bio.h
-ecs_err.o: ../../include/openssl/crypto.h ../../include/openssl/e_os2.h
-ecs_err.o: ../../include/openssl/ec.h ../../include/openssl/ecdsa.h
-ecs_err.o: ../../include/openssl/err.h ../../include/openssl/lhash.h
-ecs_err.o: ../../include/openssl/opensslconf.h ../../include/openssl/opensslv.h
-ecs_err.o: ../../include/openssl/ossl_typ.h ../../include/openssl/safestack.h
-ecs_err.o: ../../include/openssl/stack.h ../../include/openssl/symhacks.h
-ecs_err.o: ecs_err.c
-ecs_lib.o: ../../include/openssl/asn1.h ../../include/openssl/bio.h
-ecs_lib.o: ../../include/openssl/bn.h ../../include/openssl/crypto.h
-ecs_lib.o: ../../include/openssl/e_os2.h ../../include/openssl/ec.h
-ecs_lib.o: ../../include/openssl/ecdsa.h ../../include/openssl/engine.h
-ecs_lib.o: ../../include/openssl/err.h ../../include/openssl/lhash.h
-ecs_lib.o: ../../include/openssl/opensslconf.h ../../include/openssl/opensslv.h
-ecs_lib.o: ../../include/openssl/ossl_typ.h ../../include/openssl/safestack.h
-ecs_lib.o: ../../include/openssl/stack.h ../../include/openssl/symhacks.h
-ecs_lib.o: ecs_lib.c ecs_locl.h
-ecs_ossl.o: ../../include/openssl/asn1.h ../../include/openssl/bio.h
-ecs_ossl.o: ../../include/openssl/bn.h ../../include/openssl/crypto.h
-ecs_ossl.o: ../../include/openssl/e_os2.h ../../include/openssl/ec.h
-ecs_ossl.o: ../../include/openssl/ecdsa.h ../../include/openssl/err.h
-ecs_ossl.o: ../../include/openssl/lhash.h ../../include/openssl/obj_mac.h
-ecs_ossl.o: ../../include/openssl/opensslconf.h
-ecs_ossl.o: ../../include/openssl/opensslv.h ../../include/openssl/ossl_typ.h
-ecs_ossl.o: ../../include/openssl/safestack.h ../../include/openssl/stack.h
-ecs_ossl.o: ../../include/openssl/symhacks.h ecs_locl.h ecs_ossl.c
-ecs_sign.o: ../../include/openssl/asn1.h ../../include/openssl/bio.h
-ecs_sign.o: ../../include/openssl/crypto.h ../../include/openssl/e_os2.h
-ecs_sign.o: ../../include/openssl/ec.h ../../include/openssl/ecdsa.h
-ecs_sign.o: ../../include/openssl/engine.h ../../include/openssl/opensslconf.h
-ecs_sign.o: ../../include/openssl/opensslv.h ../../include/openssl/ossl_typ.h
-ecs_sign.o: ../../include/openssl/safestack.h ../../include/openssl/stack.h
-ecs_sign.o: ../../include/openssl/symhacks.h ecs_locl.h ecs_sign.c
-ecs_vrf.o: ../../include/openssl/asn1.h ../../include/openssl/bio.h
-ecs_vrf.o: ../../include/openssl/crypto.h ../../include/openssl/e_os2.h
-ecs_vrf.o: ../../include/openssl/ec.h ../../include/openssl/ecdsa.h
-ecs_vrf.o: ../../include/openssl/engine.h ../../include/openssl/opensslconf.h
-ecs_vrf.o: ../../include/openssl/opensslv.h ../../include/openssl/ossl_typ.h
-ecs_vrf.o: ../../include/openssl/safestack.h ../../include/openssl/stack.h
-ecs_vrf.o: ../../include/openssl/symhacks.h ecs_locl.h ecs_vrf.c
diff --git a/crypto/openssl/crypto/ecdsa/ecdsa.h b/crypto/openssl/crypto/ecdsa/ecdsa.h
deleted file mode 100644
index f20c8ee7381e..000000000000
--- a/crypto/openssl/crypto/ecdsa/ecdsa.h
+++ /dev/null
@@ -1,271 +0,0 @@
-/* crypto/ecdsa/ecdsa.h */
-/**
- * \file   crypto/ecdsa/ecdsa.h Include file for the OpenSSL ECDSA functions
- * \author Written by Nils Larsch for the OpenSSL project
- */
-/* ====================================================================
- * Copyright (c) 2000-2003 The OpenSSL Project.  All rights reserved.
- *
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions
- * are met:
- *
- * 1. Redistributions of source code must retain the above copyright
- *    notice, this list of conditions and the following disclaimer. 
- *
- * 2. Redistributions in binary form must reproduce the above copyright
- *    notice, this list of conditions and the following disclaimer in
- *    the documentation and/or other materials provided with the
- *    distribution.
- *
- * 3. All advertising materials mentioning features or use of this
- *    software must display the following acknowledgment:
- *    "This product includes software developed by the OpenSSL Project
- *    for use in the OpenSSL Toolkit. (http://www.OpenSSL.org/)"
- *
- * 4. The names "OpenSSL Toolkit" and "OpenSSL Project" must not be used to
- *    endorse or promote products derived from this software without
- *    prior written permission. For written permission, please contact
- *    licensing@OpenSSL.org.
- *
- * 5. Products derived from this software may not be called "OpenSSL"
- *    nor may "OpenSSL" appear in their names without prior written
- *    permission of the OpenSSL Project.
- *
- * 6. Redistributions of any form whatsoever must retain the following
- *    acknowledgment:
- *    "This product includes software developed by the OpenSSL Project
- *    for use in the OpenSSL Toolkit (http://www.OpenSSL.org/)"
- *
- * THIS SOFTWARE IS PROVIDED BY THE OpenSSL PROJECT ``AS IS'' AND ANY
- * EXPRESSED OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
- * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR
- * PURPOSE ARE DISCLAIMED.  IN NO EVENT SHALL THE OpenSSL PROJECT OR
- * ITS CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
- * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
- * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
- * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
- * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
- * STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
- * ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED
- * OF THE POSSIBILITY OF SUCH DAMAGE.
- * ====================================================================
- *
- * This product includes cryptographic software written by Eric Young
- * (eay@cryptsoft.com).  This product includes software written by Tim
- * Hudson (tjh@cryptsoft.com).
- *
- */
-#ifndef HEADER_ECDSA_H
-#define HEADER_ECDSA_H
-
-#include <openssl/opensslconf.h>
-
-#ifdef OPENSSL_NO_ECDSA
-#error ECDSA is disabled.
-#endif
-
-#include <openssl/ec.h>
-#include <openssl/ossl_typ.h>
-#ifndef OPENSSL_NO_DEPRECATED
-#include <openssl/bn.h>
-#endif
-
-#ifdef __cplusplus
-extern "C" {
-#endif
-
-typedef struct ECDSA_SIG_st
-	{
-	BIGNUM *r;
-	BIGNUM *s;
-	} ECDSA_SIG;
-
-/** ECDSA_SIG *ECDSA_SIG_new(void)
- * allocates and initialize a ECDSA_SIG structure
- * \return pointer to a ECDSA_SIG structure or NULL if an error occurred
- */
-ECDSA_SIG *ECDSA_SIG_new(void);
-
-/** ECDSA_SIG_free
- * frees a ECDSA_SIG structure
- * \param a pointer to the ECDSA_SIG structure
- */
-void	  ECDSA_SIG_free(ECDSA_SIG *a);
-
-/** i2d_ECDSA_SIG
- * DER encode content of ECDSA_SIG object (note: this function modifies *pp
- * (*pp += length of the DER encoded signature)).
- * \param a  pointer to the ECDSA_SIG object
- * \param pp pointer to a unsigned char pointer for the output or NULL
- * \return the length of the DER encoded ECDSA_SIG object or 0 
- */
-int	  i2d_ECDSA_SIG(const ECDSA_SIG *a, unsigned char **pp);
-
-/** d2i_ECDSA_SIG
- * decodes a DER encoded ECDSA signature (note: this function changes *pp
- * (*pp += len)). 
- * \param v pointer to ECDSA_SIG pointer (may be NULL)
- * \param pp buffer with the DER encoded signature
- * \param len bufferlength
- * \return pointer to the decoded ECDSA_SIG structure (or NULL)
- */
-ECDSA_SIG *d2i_ECDSA_SIG(ECDSA_SIG **v, const unsigned char **pp, long len);
-
-/** ECDSA_do_sign
- * computes the ECDSA signature of the given hash value using
- * the supplied private key and returns the created signature.
- * \param dgst pointer to the hash value
- * \param dgst_len length of the hash value
- * \param eckey pointer to the EC_KEY object containing a private EC key
- * \return pointer to a ECDSA_SIG structure or NULL
- */
-ECDSA_SIG *ECDSA_do_sign(const unsigned char *dgst,int dgst_len,EC_KEY *eckey);
-
-/** ECDSA_do_sign_ex
- * computes ECDSA signature of a given hash value using the supplied
- * private key (note: sig must point to ECDSA_size(eckey) bytes of memory).
- * \param dgst pointer to the hash value to sign
- * \param dgstlen length of the hash value
- * \param kinv optional pointer to a pre-computed inverse k
- * \param rp optional pointer to the pre-computed rp value (see 
- *        ECDSA_sign_setup
- * \param eckey pointer to the EC_KEY object containing a private EC key
- * \return pointer to a ECDSA_SIG structure or NULL
- */
-ECDSA_SIG *ECDSA_do_sign_ex(const unsigned char *dgst, int dgstlen, 
-		const BIGNUM *kinv, const BIGNUM *rp, EC_KEY *eckey);
-
-/** ECDSA_do_verify
- * verifies that the supplied signature is a valid ECDSA
- * signature of the supplied hash value using the supplied public key.
- * \param dgst pointer to the hash value
- * \param dgst_len length of the hash value
- * \param sig  pointer to the ECDSA_SIG structure
- * \param eckey pointer to the EC_KEY object containing a public EC key
- * \return 1 if the signature is valid, 0 if the signature is invalid and -1 on error
- */
-int	  ECDSA_do_verify(const unsigned char *dgst, int dgst_len,
-		const ECDSA_SIG *sig, EC_KEY* eckey);
-
-const ECDSA_METHOD *ECDSA_OpenSSL(void);
-
-/** ECDSA_set_default_method
- * sets the default ECDSA method
- * \param meth the new default ECDSA_METHOD
- */
-void	  ECDSA_set_default_method(const ECDSA_METHOD *meth);
-
-/** ECDSA_get_default_method
- * returns the default ECDSA method
- * \return pointer to ECDSA_METHOD structure containing the default method
- */
-const ECDSA_METHOD *ECDSA_get_default_method(void);
-
-/** ECDSA_set_method
- * sets method to be used for the ECDSA operations
- * \param eckey pointer to the EC_KEY object
- * \param meth  pointer to the new method
- * \return 1 on success and 0 otherwise 
- */
-int 	  ECDSA_set_method(EC_KEY *eckey, const ECDSA_METHOD *meth);
-
-/** ECDSA_size
- * returns the maximum length of the DER encoded signature
- * \param  eckey pointer to a EC_KEY object
- * \return numbers of bytes required for the DER encoded signature
- */
-int	  ECDSA_size(const EC_KEY *eckey);
-
-/** ECDSA_sign_setup
- * precompute parts of the signing operation. 
- * \param eckey pointer to the EC_KEY object containing a private EC key
- * \param ctx  pointer to a BN_CTX object (may be NULL)
- * \param kinv pointer to a BIGNUM pointer for the inverse of k
- * \param rp   pointer to a BIGNUM pointer for x coordinate of k * generator
- * \return 1 on success and 0 otherwise
- */
-int 	  ECDSA_sign_setup(EC_KEY *eckey, BN_CTX *ctx, BIGNUM **kinv, 
-		BIGNUM **rp);
-
-/** ECDSA_sign
- * computes ECDSA signature of a given hash value using the supplied
- * private key (note: sig must point to ECDSA_size(eckey) bytes of memory).
- * \param type this parameter is ignored
- * \param dgst pointer to the hash value to sign
- * \param dgstlen length of the hash value
- * \param sig buffer to hold the DER encoded signature
- * \param siglen pointer to the length of the returned signature
- * \param eckey pointer to the EC_KEY object containing a private EC key
- * \return 1 on success and 0 otherwise
- */
-int	  ECDSA_sign(int type, const unsigned char *dgst, int dgstlen, 
-		unsigned char *sig, unsigned int *siglen, EC_KEY *eckey);
-
-
-/** ECDSA_sign_ex
- * computes ECDSA signature of a given hash value using the supplied
- * private key (note: sig must point to ECDSA_size(eckey) bytes of memory).
- * \param type this parameter is ignored
- * \param dgst pointer to the hash value to sign
- * \param dgstlen length of the hash value
- * \param sig buffer to hold the DER encoded signature
- * \param siglen pointer to the length of the returned signature
- * \param kinv optional pointer to a pre-computed inverse k
- * \param rp optional pointer to the pre-computed rp value (see 
- *        ECDSA_sign_setup
- * \param eckey pointer to the EC_KEY object containing a private EC key
- * \return 1 on success and 0 otherwise
- */
-int	  ECDSA_sign_ex(int type, const unsigned char *dgst, int dgstlen, 
-		unsigned char *sig, unsigned int *siglen, const BIGNUM *kinv,
-		const BIGNUM *rp, EC_KEY *eckey);
-
-/** ECDSA_verify
- * verifies that the given signature is valid ECDSA signature
- * of the supplied hash value using the specified public key.
- * \param type this parameter is ignored
- * \param dgst pointer to the hash value 
- * \param dgstlen length of the hash value
- * \param sig  pointer to the DER encoded signature
- * \param siglen length of the DER encoded signature
- * \param eckey pointer to the EC_KEY object containing a public EC key
- * \return 1 if the signature is valid, 0 if the signature is invalid and -1 on error
- */
-int 	  ECDSA_verify(int type, const unsigned char *dgst, int dgstlen, 
-		const unsigned char *sig, int siglen, EC_KEY *eckey);
-
-/* the standard ex_data functions */
-int 	  ECDSA_get_ex_new_index(long argl, void *argp, CRYPTO_EX_new 
-		*new_func, CRYPTO_EX_dup *dup_func, CRYPTO_EX_free *free_func);
-int 	  ECDSA_set_ex_data(EC_KEY *d, int idx, void *arg);
-void 	  *ECDSA_get_ex_data(EC_KEY *d, int idx);
-
-
-/* BEGIN ERROR CODES */
-/* The following lines are auto generated by the script mkerr.pl. Any changes
- * made after this point may be overwritten when the script is next run.
- */
-void ERR_load_ECDSA_strings(void);
-
-/* Error codes for the ECDSA functions. */
-
-/* Function codes. */
-#define ECDSA_F_ECDSA_DATA_NEW_METHOD			 100
-#define ECDSA_F_ECDSA_DO_SIGN				 101
-#define ECDSA_F_ECDSA_DO_VERIFY				 102
-#define ECDSA_F_ECDSA_SIGN_SETUP			 103
-
-/* Reason codes. */
-#define ECDSA_R_BAD_SIGNATURE				 100
-#define ECDSA_R_DATA_TOO_LARGE_FOR_KEY_SIZE		 101
-#define ECDSA_R_ERR_EC_LIB				 102
-#define ECDSA_R_MISSING_PARAMETERS			 103
-#define ECDSA_R_NEED_NEW_SETUP_VALUES			 106
-#define ECDSA_R_RANDOM_NUMBER_GENERATION_FAILED		 104
-#define ECDSA_R_SIGNATURE_MALLOC_FAILED			 105
-
-#ifdef  __cplusplus
-}
-#endif
-#endif
diff --git a/crypto/openssl/crypto/ecdsa/ecdsatest.c b/crypto/openssl/crypto/ecdsa/ecdsatest.c
deleted file mode 100644
index 59be39bb41c0..000000000000
--- a/crypto/openssl/crypto/ecdsa/ecdsatest.c
+++ /dev/null
@@ -1,500 +0,0 @@
-/* crypto/ecdsa/ecdsatest.c */
-/*
- * Written by Nils Larsch for the OpenSSL project.
- */
-/* ====================================================================
- * Copyright (c) 2000-2005 The OpenSSL Project.  All rights reserved.
- *
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions
- * are met:
- *
- * 1. Redistributions of source code must retain the above copyright
- *    notice, this list of conditions and the following disclaimer. 
- *
- * 2. Redistributions in binary form must reproduce the above copyright
- *    notice, this list of conditions and the following disclaimer in
- *    the documentation and/or other materials provided with the
- *    distribution.
- *
- * 3. All advertising materials mentioning features or use of this
- *    software must display the following acknowledgment:
- *    "This product includes software developed by the OpenSSL Project
- *    for use in the OpenSSL Toolkit. (http://www.OpenSSL.org/)"
- *
- * 4. The names "OpenSSL Toolkit" and "OpenSSL Project" must not be used to
- *    endorse or promote products derived from this software without
- *    prior written permission. For written permission, please contact
- *    licensing@OpenSSL.org.
- *
- * 5. Products derived from this software may not be called "OpenSSL"
- *    nor may "OpenSSL" appear in their names without prior written
- *    permission of the OpenSSL Project.
- *
- * 6. Redistributions of any form whatsoever must retain the following
- *    acknowledgment:
- *    "This product includes software developed by the OpenSSL Project
- *    for use in the OpenSSL Toolkit (http://www.OpenSSL.org/)"
- *
- * THIS SOFTWARE IS PROVIDED BY THE OpenSSL PROJECT ``AS IS'' AND ANY
- * EXPRESSED OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
- * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR
- * PURPOSE ARE DISCLAIMED.  IN NO EVENT SHALL THE OpenSSL PROJECT OR
- * ITS CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
- * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
- * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
- * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
- * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
- * STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
- * ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED
- * OF THE POSSIBILITY OF SUCH DAMAGE.
- * ====================================================================
- *
- * This product includes cryptographic software written by Eric Young
- * (eay@cryptsoft.com).  This product includes software written by Tim
- * Hudson (tjh@cryptsoft.com).
- *
- */
-/* ====================================================================
- * Copyright 2002 Sun Microsystems, Inc. ALL RIGHTS RESERVED.
- *
- * Portions of the attached software ("Contribution") are developed by 
- * SUN MICROSYSTEMS, INC., and are contributed to the OpenSSL project.
- *
- * The Contribution is licensed pursuant to the OpenSSL open source
- * license provided above.
- *
- * The elliptic curve binary polynomial software is originally written by 
- * Sheueling Chang Shantz and Douglas Stebila of Sun Microsystems Laboratories.
- *
- */
-
-#include <stdio.h>
-#include <stdlib.h>
-#include <string.h>
-
-#include <openssl/opensslconf.h> /* To see if OPENSSL_NO_ECDSA is defined */
-
-#ifdef OPENSSL_NO_ECDSA
-int main(int argc, char * argv[])
-	{
-	puts("Elliptic curves are disabled.");
-	return 0;
-	}
-#else
-
-#include <openssl/crypto.h>
-#include <openssl/bio.h>
-#include <openssl/evp.h>
-#include <openssl/bn.h>
-#include <openssl/ecdsa.h>
-#ifndef OPENSSL_NO_ENGINE
-#include <openssl/engine.h>
-#endif
-#include <openssl/err.h>
-#include <openssl/rand.h>
-
-static const char rnd_seed[] = "string to make the random number generator "
-	"think it has entropy";
-
-/* declaration of the test functions */
-int x9_62_tests(BIO *);
-int x9_62_test_internal(BIO *out, int nid, const char *r, const char *s);
-int test_builtin(BIO *);
-
-/* functions to change the RAND_METHOD */
-int change_rand(void);
-int restore_rand(void);
-int fbytes(unsigned char *buf, int num);
-
-RAND_METHOD	fake_rand;
-const RAND_METHOD *old_rand;
-
-int change_rand(void)
-	{
-	/* save old rand method */
-	if ((old_rand = RAND_get_rand_method()) == NULL)
-		return 0;
-
-	fake_rand.seed    = old_rand->seed;
-	fake_rand.cleanup = old_rand->cleanup;
-	fake_rand.add     = old_rand->add;
-	fake_rand.status  = old_rand->status;
-	/* use own random function */
-	fake_rand.bytes      = fbytes;
-	fake_rand.pseudorand = old_rand->bytes;
-	/* set new RAND_METHOD */
-	if (!RAND_set_rand_method(&fake_rand))
-		return 0;
-	return 1;
-	}
-
-int restore_rand(void)
-	{
-	if (!RAND_set_rand_method(old_rand))
-		return 0;
-	else
-		return 1;
-	}
-
-static int fbytes_counter = 0;
-static const char *numbers[8] = {
-	"651056770906015076056810763456358567190100156695615665659",
-	"6140507067065001063065065565667405560006161556565665656654",
-	"8763001015071075675010661307616710783570106710677817767166"
-	"71676178726717",
-	"7000000175690566466555057817571571075705015757757057795755"
-	"55657156756655",
-	"1275552191113212300012030439187146164646146646466749494799",
-	"1542725565216523985789236956265265265235675811949404040041",
-	"1456427555219115346513212300075341203043918714616464614664"
-	"64667494947990",
-	"1712787255652165239672857892369562652652652356758119494040"
-	"40041670216363"};
-
-int fbytes(unsigned char *buf, int num)
-	{
-	int	ret;
-	BIGNUM	*tmp = NULL;
-
-	if (fbytes_counter >= 8)
-		return 0;
-	tmp = BN_new();
-	if (!tmp)
-		return 0;
-	if (!BN_dec2bn(&tmp, numbers[fbytes_counter]))
-		{
-		BN_free(tmp);
-		return 0;
-		}
-	fbytes_counter ++;
-	ret = BN_bn2bin(tmp, buf);	
-	if (ret == 0 || ret != num)
-		ret = 0;
-	else
-		ret = 1;
-	if (tmp)
-		BN_free(tmp);
-	return ret;
-	}
-
-/* some tests from the X9.62 draft */
-int x9_62_test_internal(BIO *out, int nid, const char *r_in, const char *s_in)
-	{
-	int	ret = 0;
-	const char message[] = "abc";
-	unsigned char digest[20];
-	unsigned int  dgst_len = 0;
-	EVP_MD_CTX md_ctx;
-	EC_KEY    *key = NULL;
-	ECDSA_SIG *signature = NULL;
-	BIGNUM    *r = NULL, *s = NULL;
-
-	EVP_MD_CTX_init(&md_ctx);
-	/* get the message digest */
-	EVP_DigestInit(&md_ctx, EVP_ecdsa());
-	EVP_DigestUpdate(&md_ctx, (const void*)message, 3);
-	EVP_DigestFinal(&md_ctx, digest, &dgst_len);
-
-	BIO_printf(out, "testing %s: ", OBJ_nid2sn(nid));
-	/* create the key */
-	if ((key = EC_KEY_new_by_curve_name(nid)) == NULL)
-		goto x962_int_err;
-	if (!EC_KEY_generate_key(key))
-		goto x962_int_err;
-	BIO_printf(out, ".");
-	BIO_flush(out);
-	/* create the signature */
-	signature = ECDSA_do_sign(digest, 20, key);
-	if (signature == NULL)
-		goto x962_int_err;
-	BIO_printf(out, ".");
-	BIO_flush(out);
-	/* compare the created signature with the expected signature */
-	if ((r = BN_new()) == NULL || (s = BN_new()) == NULL)
-		goto x962_int_err;
-	if (!BN_dec2bn(&r, r_in) ||
-	    !BN_dec2bn(&s, s_in))
-		goto x962_int_err;
-	if (BN_cmp(signature->r ,r) || BN_cmp(signature->s, s))
-		goto x962_int_err;
-	BIO_printf(out, ".");
-	BIO_flush(out);
-	/* verify the signature */
-	if (ECDSA_do_verify(digest, 20, signature, key) != 1)
-		goto x962_int_err;
-	BIO_printf(out, ".");
-	BIO_flush(out);
-
-	BIO_printf(out, " ok\n");
-	ret = 1;
-x962_int_err:
-	if (!ret)
-		BIO_printf(out, " failed\n");
-	if (key)
-		EC_KEY_free(key);
-	if (signature)
-		ECDSA_SIG_free(signature);
-	if (r)
-		BN_free(r);
-	if (s)
-		BN_free(s);
-	EVP_MD_CTX_cleanup(&md_ctx);
-	return ret;
-	}
-
-int x9_62_tests(BIO *out)
-	{
-	int ret = 0;
-
-	BIO_printf(out, "some tests from X9.62:\n");
-
-	/* set own rand method */
-	if (!change_rand())
-		goto x962_err;
-
-	if (!x9_62_test_internal(out, NID_X9_62_prime192v1,
-		"3342403536405981729393488334694600415596881826869351677613",
-		"5735822328888155254683894997897571951568553642892029982342"))
-		goto x962_err;
-	if (!x9_62_test_internal(out, NID_X9_62_prime239v1,
-		"3086361431751678114926225473006680188549593787585317781474"
-		"62058306432176",
-		"3238135532097973577080787768312505059318910517550078427819"
-		"78505179448783"))
-		goto x962_err;
-	if (!x9_62_test_internal(out, NID_X9_62_c2tnb191v1,
-		"87194383164871543355722284926904419997237591535066528048",
-		"308992691965804947361541664549085895292153777025772063598"))
-		goto x962_err;
-	if (!x9_62_test_internal(out, NID_X9_62_c2tnb239v1,
-		"2159633321041961198501834003903461262881815148684178964245"
-		"5876922391552",
-		"1970303740007316867383349976549972270528498040721988191026"
-		"49413465737174"))
-		goto x962_err;
-
-	ret = 1;
-x962_err:
-	if (!restore_rand())
-		ret = 0;
-	return ret;
-	}
-
-int test_builtin(BIO *out)
-	{
-	EC_builtin_curve *curves = NULL;
-	size_t		crv_len = 0, n = 0;
-	EC_KEY		*eckey = NULL, *wrong_eckey = NULL;
-	EC_GROUP	*group;
-	unsigned char	digest[20], wrong_digest[20];
-	unsigned char	*signature = NULL; 
-	unsigned int	sig_len;
-	int		nid, ret =  0;
-	
-	/* fill digest values with some random data */
-	if (!RAND_pseudo_bytes(digest, 20) ||
-	    !RAND_pseudo_bytes(wrong_digest, 20))
-		{
-		BIO_printf(out, "ERROR: unable to get random data\n");
-		goto builtin_err;
-		}
-
-	/* create and verify a ecdsa signature with every availble curve
-	 * (with ) */
-	BIO_printf(out, "\ntesting ECDSA_sign() and ECDSA_verify() "
-		"with some internal curves:\n");
-
-	/* get a list of all internal curves */
-	crv_len = EC_get_builtin_curves(NULL, 0);
-
-	curves = OPENSSL_malloc(sizeof(EC_builtin_curve) * crv_len);
-
-	if (curves == NULL)
-		{
-		BIO_printf(out, "malloc error\n");
-		goto builtin_err;
-		}
-	
-	if (!EC_get_builtin_curves(curves, crv_len))
-		{
-		BIO_printf(out, "unable to get internal curves\n");
-		goto builtin_err;
-		}
-
-	/* now create and verify a signature for every curve */
-	for (n = 0; n < crv_len; n++)
-		{
-		unsigned char dirt, offset;
-
-		nid = curves[n].nid;
-		if (nid == NID_ipsec4)
-			continue;
-		/* create new ecdsa key (== EC_KEY) */
-		if ((eckey = EC_KEY_new()) == NULL)
-			goto builtin_err;
-		group = EC_GROUP_new_by_curve_name(nid);
-		if (group == NULL)
-			goto builtin_err;
-		if (EC_KEY_set_group(eckey, group) == 0)
-			goto builtin_err;
-		EC_GROUP_free(group);
-		if (EC_GROUP_get_degree(EC_KEY_get0_group(eckey)) < 160)
-			/* drop the curve */ 
-			{
-			EC_KEY_free(eckey);
-			eckey = NULL;
-			continue;
-			}
-		BIO_printf(out, "%s: ", OBJ_nid2sn(nid));
-		/* create key */
-		if (!EC_KEY_generate_key(eckey))
-			{
-			BIO_printf(out, " failed\n");
-			goto builtin_err;
-			}
-		/* create second key */
-		if ((wrong_eckey = EC_KEY_new()) == NULL)
-			goto builtin_err;
-		group = EC_GROUP_new_by_curve_name(nid);
-		if (group == NULL)
-			goto builtin_err;
-		if (EC_KEY_set_group(wrong_eckey, group) == 0)
-			goto builtin_err;
-		EC_GROUP_free(group);
-		if (!EC_KEY_generate_key(wrong_eckey))
-			{
-			BIO_printf(out, " failed\n");
-			goto builtin_err;
-			}
-
-		BIO_printf(out, ".");
-		BIO_flush(out);
-		/* check key */
-		if (!EC_KEY_check_key(eckey))
-			{
-			BIO_printf(out, " failed\n");
-			goto builtin_err;
-			}
-		BIO_printf(out, ".");
-		BIO_flush(out);
-		/* create signature */
-		sig_len = ECDSA_size(eckey);
-		if ((signature = OPENSSL_malloc(sig_len)) == NULL)
-			goto builtin_err;
-                if (!ECDSA_sign(0, digest, 20, signature, &sig_len, eckey))
-			{
-			BIO_printf(out, " failed\n");
-			goto builtin_err;
-			}
-		BIO_printf(out, ".");
-		BIO_flush(out);
-		/* verify signature */
-		if (ECDSA_verify(0, digest, 20, signature, sig_len, eckey) != 1)
-			{
-			BIO_printf(out, " failed\n");
-			goto builtin_err;
-			}
-		BIO_printf(out, ".");
-		BIO_flush(out);
-		/* verify signature with the wrong key */
-		if (ECDSA_verify(0, digest, 20, signature, sig_len, 
-			wrong_eckey) == 1)
-			{
-			BIO_printf(out, " failed\n");
-			goto builtin_err;
-			}
-		BIO_printf(out, ".");
-		BIO_flush(out);
-		/* wrong digest */
-		if (ECDSA_verify(0, wrong_digest, 20, signature, sig_len,
-			eckey) == 1)
-			{
-			BIO_printf(out, " failed\n");
-			goto builtin_err;
-			}
-		BIO_printf(out, ".");
-		BIO_flush(out);
-		/* modify a single byte of the signature */
-		offset = signature[10] % sig_len;
-		dirt   = signature[11];
-		signature[offset] ^= dirt ? dirt : 1; 
-		if (ECDSA_verify(0, digest, 20, signature, sig_len, eckey) == 1)
-			{
-			BIO_printf(out, " failed\n");
-			goto builtin_err;
-			}
-		BIO_printf(out, ".");
-		BIO_flush(out);
-		
-		BIO_printf(out, " ok\n");
-		/* cleanup */
-		OPENSSL_free(signature);
-		signature = NULL;
-		EC_KEY_free(eckey);
-		eckey = NULL;
-		EC_KEY_free(wrong_eckey);
-		wrong_eckey = NULL;
-		}
-
-	ret = 1;	
-builtin_err:
-	if (eckey)
-		EC_KEY_free(eckey);
-	if (wrong_eckey)
-		EC_KEY_free(wrong_eckey);
-	if (signature)
-		OPENSSL_free(signature);
-	if (curves)
-		OPENSSL_free(curves);
-
-	return ret;
-	}
-
-int main(void)
-	{
-	int 	ret = 1;
-	BIO	*out;
-
-	out = BIO_new_fp(stdout, BIO_NOCLOSE);
-	
-	/* enable memory leak checking unless explicitly disabled */
-	if (!((getenv("OPENSSL_DEBUG_MEMORY") != NULL) && 
-		(0 == strcmp(getenv("OPENSSL_DEBUG_MEMORY"), "off"))))
-		{
-		CRYPTO_malloc_debug_init();
-		CRYPTO_set_mem_debug_options(V_CRYPTO_MDEBUG_ALL);
-		}
-	else
-		{
-		/* OPENSSL_DEBUG_MEMORY=off */
-		CRYPTO_set_mem_debug_functions(0, 0, 0, 0, 0);
-		}
-	CRYPTO_mem_ctrl(CRYPTO_MEM_CHECK_ON);
-
-	ERR_load_crypto_strings();
-
-	/* initialize the prng */
-	RAND_seed(rnd_seed, sizeof(rnd_seed));
-
-	/* the tests */
-	if (!x9_62_tests(out))  goto err;
-	if (!test_builtin(out)) goto err;
-	
-	ret = 0;
-err:	
-	if (ret) 	
-		BIO_printf(out, "\nECDSA test failed\n");
-	else 
-		BIO_printf(out, "\nECDSA test passed\n");
-	if (ret)
-		ERR_print_errors(out);
-	CRYPTO_cleanup_all_ex_data();
-	ERR_remove_state(0);
-	ERR_free_strings();
-	CRYPTO_mem_leaks(out);
-	if (out != NULL)
-		BIO_free(out);
-	return ret;
-	}	
-#endif
diff --git a/crypto/openssl/crypto/ecdsa/ecs_asn1.c b/crypto/openssl/crypto/ecdsa/ecs_asn1.c
deleted file mode 100644
index b295489400e7..000000000000
--- a/crypto/openssl/crypto/ecdsa/ecs_asn1.c
+++ /dev/null
@@ -1,67 +0,0 @@
-/* crypto/ecdsa/ecs_asn1.c */
-/* ====================================================================
- * Copyright (c) 2000-2002 The OpenSSL Project.  All rights reserved.
- *
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions
- * are met:
- *
- * 1. Redistributions of source code must retain the above copyright
- *    notice, this list of conditions and the following disclaimer. 
- *
- * 2. Redistributions in binary form must reproduce the above copyright
- *    notice, this list of conditions and the following disclaimer in
- *    the documentation and/or other materials provided with the
- *    distribution.
- *
- * 3. All advertising materials mentioning features or use of this
- *    software must display the following acknowledgment:
- *    "This product includes software developed by the OpenSSL Project
- *    for use in the OpenSSL Toolkit. (http://www.OpenSSL.org/)"
- *
- * 4. The names "OpenSSL Toolkit" and "OpenSSL Project" must not be used to
- *    endorse or promote products derived from this software without
- *    prior written permission. For written permission, please contact
- *    licensing@OpenSSL.org.
- *
- * 5. Products derived from this software may not be called "OpenSSL"
- *    nor may "OpenSSL" appear in their names without prior written
- *    permission of the OpenSSL Project.
- *
- * 6. Redistributions of any form whatsoever must retain the following
- *    acknowledgment:
- *    "This product includes software developed by the OpenSSL Project
- *    for use in the OpenSSL Toolkit (http://www.OpenSSL.org/)"
- *
- * THIS SOFTWARE IS PROVIDED BY THE OpenSSL PROJECT ``AS IS'' AND ANY
- * EXPRESSED OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
- * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR
- * PURPOSE ARE DISCLAIMED.  IN NO EVENT SHALL THE OpenSSL PROJECT OR
- * ITS CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
- * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
- * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
- * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
- * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
- * STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
- * ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED
- * OF THE POSSIBILITY OF SUCH DAMAGE.
- * ====================================================================
- *
- * This product includes cryptographic software written by Eric Young
- * (eay@cryptsoft.com).  This product includes software written by Tim
- * Hudson (tjh@cryptsoft.com).
- *
- */
-
-#include "ecs_locl.h"
-#include <openssl/err.h>
-#include <openssl/asn1t.h>
-
-ASN1_SEQUENCE(ECDSA_SIG) = {
-	ASN1_SIMPLE(ECDSA_SIG, r, CBIGNUM),
-	ASN1_SIMPLE(ECDSA_SIG, s, CBIGNUM)
-} ASN1_SEQUENCE_END(ECDSA_SIG)
-
-DECLARE_ASN1_FUNCTIONS_const(ECDSA_SIG)
-DECLARE_ASN1_ENCODE_FUNCTIONS_const(ECDSA_SIG, ECDSA_SIG)
-IMPLEMENT_ASN1_FUNCTIONS_const(ECDSA_SIG)
diff --git a/crypto/openssl/crypto/ecdsa/ecs_err.c b/crypto/openssl/crypto/ecdsa/ecs_err.c
deleted file mode 100644
index d2a53730ea5f..000000000000
--- a/crypto/openssl/crypto/ecdsa/ecs_err.c
+++ /dev/null
@@ -1,104 +0,0 @@
-/* crypto/ecdsa/ecs_err.c */
-/* ====================================================================
- * Copyright (c) 1999-2005 The OpenSSL Project.  All rights reserved.
- *
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions
- * are met:
- *
- * 1. Redistributions of source code must retain the above copyright
- *    notice, this list of conditions and the following disclaimer. 
- *
- * 2. Redistributions in binary form must reproduce the above copyright
- *    notice, this list of conditions and the following disclaimer in
- *    the documentation and/or other materials provided with the
- *    distribution.
- *
- * 3. All advertising materials mentioning features or use of this
- *    software must display the following acknowledgment:
- *    "This product includes software developed by the OpenSSL Project
- *    for use in the OpenSSL Toolkit. (http://www.OpenSSL.org/)"
- *
- * 4. The names "OpenSSL Toolkit" and "OpenSSL Project" must not be used to
- *    endorse or promote products derived from this software without
- *    prior written permission. For written permission, please contact
- *    openssl-core@OpenSSL.org.
- *
- * 5. Products derived from this software may not be called "OpenSSL"
- *    nor may "OpenSSL" appear in their names without prior written
- *    permission of the OpenSSL Project.
- *
- * 6. Redistributions of any form whatsoever must retain the following
- *    acknowledgment:
- *    "This product includes software developed by the OpenSSL Project
- *    for use in the OpenSSL Toolkit (http://www.OpenSSL.org/)"
- *
- * THIS SOFTWARE IS PROVIDED BY THE OpenSSL PROJECT ``AS IS'' AND ANY
- * EXPRESSED OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
- * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR
- * PURPOSE ARE DISCLAIMED.  IN NO EVENT SHALL THE OpenSSL PROJECT OR
- * ITS CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
- * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
- * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
- * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
- * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
- * STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
- * ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED
- * OF THE POSSIBILITY OF SUCH DAMAGE.
- * ====================================================================
- *
- * This product includes cryptographic software written by Eric Young
- * (eay@cryptsoft.com).  This product includes software written by Tim
- * Hudson (tjh@cryptsoft.com).
- *
- */
-
-/* NOTE: this file was auto generated by the mkerr.pl script: any changes
- * made to it will be overwritten when the script next updates this file,
- * only reason strings will be preserved.
- */
-
-#include <stdio.h>
-#include <openssl/err.h>
-#include <openssl/ecdsa.h>
-
-/* BEGIN ERROR CODES */
-#ifndef OPENSSL_NO_ERR
-
-#define ERR_FUNC(func) ERR_PACK(ERR_LIB_ECDSA,func,0)
-#define ERR_REASON(reason) ERR_PACK(ERR_LIB_ECDSA,0,reason)
-
-static ERR_STRING_DATA ECDSA_str_functs[]=
-	{
-{ERR_FUNC(ECDSA_F_ECDSA_DATA_NEW_METHOD),	"ECDSA_DATA_NEW_METHOD"},
-{ERR_FUNC(ECDSA_F_ECDSA_DO_SIGN),	"ECDSA_do_sign"},
-{ERR_FUNC(ECDSA_F_ECDSA_DO_VERIFY),	"ECDSA_do_verify"},
-{ERR_FUNC(ECDSA_F_ECDSA_SIGN_SETUP),	"ECDSA_sign_setup"},
-{0,NULL}
-	};
-
-static ERR_STRING_DATA ECDSA_str_reasons[]=
-	{
-{ERR_REASON(ECDSA_R_BAD_SIGNATURE)       ,"bad signature"},
-{ERR_REASON(ECDSA_R_DATA_TOO_LARGE_FOR_KEY_SIZE),"data too large for key size"},
-{ERR_REASON(ECDSA_R_ERR_EC_LIB)          ,"err ec lib"},
-{ERR_REASON(ECDSA_R_MISSING_PARAMETERS)  ,"missing parameters"},
-{ERR_REASON(ECDSA_R_NEED_NEW_SETUP_VALUES),"need new setup values"},
-{ERR_REASON(ECDSA_R_RANDOM_NUMBER_GENERATION_FAILED),"random number generation failed"},
-{ERR_REASON(ECDSA_R_SIGNATURE_MALLOC_FAILED),"signature malloc failed"},
-{0,NULL}
-	};
-
-#endif
-
-void ERR_load_ECDSA_strings(void)
-	{
-#ifndef OPENSSL_NO_ERR
-
-	if (ERR_func_error_string(ECDSA_str_functs[0].error) == NULL)
-		{
-		ERR_load_strings(0,ECDSA_str_functs);
-		ERR_load_strings(0,ECDSA_str_reasons);
-		}
-#endif
-	}
diff --git a/crypto/openssl/crypto/ecdsa/ecs_lib.c b/crypto/openssl/crypto/ecdsa/ecs_lib.c
deleted file mode 100644
index 85e8a3a7ed9b..000000000000
--- a/crypto/openssl/crypto/ecdsa/ecs_lib.c
+++ /dev/null
@@ -1,261 +0,0 @@
-/* crypto/ecdsa/ecs_lib.c */
-/* ====================================================================
- * Copyright (c) 1998-2005 The OpenSSL Project.  All rights reserved.
- *
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions
- * are met:
- *
- * 1. Redistributions of source code must retain the above copyright
- *    notice, this list of conditions and the following disclaimer. 
- *
- * 2. Redistributions in binary form must reproduce the above copyright
- *    notice, this list of conditions and the following disclaimer in
- *    the documentation and/or other materials provided with the
- *    distribution.
- *
- * 3. All advertising materials mentioning features or use of this
- *    software must display the following acknowledgment:
- *    "This product includes software developed by the OpenSSL Project
- *    for use in the OpenSSL Toolkit. (http://www.OpenSSL.org/)"
- *
- * 4. The names "OpenSSL Toolkit" and "OpenSSL Project" must not be used to
- *    endorse or promote products derived from this software without
- *    prior written permission. For written permission, please contact
- *    openssl-core@OpenSSL.org.
- *
- * 5. Products derived from this software may not be called "OpenSSL"
- *    nor may "OpenSSL" appear in their names without prior written
- *    permission of the OpenSSL Project.
- *
- * 6. Redistributions of any form whatsoever must retain the following
- *    acknowledgment:
- *    "This product includes software developed by the OpenSSL Project
- *    for use in the OpenSSL Toolkit (http://www.OpenSSL.org/)"
- *
- * THIS SOFTWARE IS PROVIDED BY THE OpenSSL PROJECT ``AS IS'' AND ANY
- * EXPRESSED OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
- * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR
- * PURPOSE ARE DISCLAIMED.  IN NO EVENT SHALL THE OpenSSL PROJECT OR
- * ITS CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
- * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
- * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
- * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
- * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
- * STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
- * ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED
- * OF THE POSSIBILITY OF SUCH DAMAGE.
- * ====================================================================
- *
- * This product includes cryptographic software written by Eric Young
- * (eay@cryptsoft.com).  This product includes software written by Tim
- * Hudson (tjh@cryptsoft.com).
- *
- */
-
-#include <string.h>
-#include "ecs_locl.h"
-#ifndef OPENSSL_NO_ENGINE
-#include <openssl/engine.h>
-#endif
-#include <openssl/err.h>
-#include <openssl/bn.h>
-
-const char ECDSA_version[]="ECDSA" OPENSSL_VERSION_PTEXT;
-
-static const ECDSA_METHOD *default_ECDSA_method = NULL;
-
-static void *ecdsa_data_new(void);
-static void *ecdsa_data_dup(void *);
-static void  ecdsa_data_free(void *);
-
-void ECDSA_set_default_method(const ECDSA_METHOD *meth)
-{
-	default_ECDSA_method = meth;
-}
-
-const ECDSA_METHOD *ECDSA_get_default_method(void)
-{
-	if(!default_ECDSA_method) 
-		default_ECDSA_method = ECDSA_OpenSSL();
-	return default_ECDSA_method;
-}
-
-int ECDSA_set_method(EC_KEY *eckey, const ECDSA_METHOD *meth)
-{
-        const ECDSA_METHOD *mtmp;
-	ECDSA_DATA *ecdsa;
-
-	ecdsa = ecdsa_check(eckey);
-
-	if (ecdsa == NULL)
-		return 0;
-
-        mtmp = ecdsa->meth;
-#ifndef OPENSSL_NO_ENGINE
-	if (ecdsa->engine)
-	{
-		ENGINE_finish(ecdsa->engine);
-		ecdsa->engine = NULL;
-	}
-#endif
-        ecdsa->meth = meth;
-
-        return 1;
-}
-
-static ECDSA_DATA *ECDSA_DATA_new_method(ENGINE *engine)
-{
-	ECDSA_DATA *ret;
-
-	ret=(ECDSA_DATA *)OPENSSL_malloc(sizeof(ECDSA_DATA));
-	if (ret == NULL)
-	{
-		ECDSAerr(ECDSA_F_ECDSA_DATA_NEW_METHOD, ERR_R_MALLOC_FAILURE);
-		return(NULL);
-	}
-
-	ret->init = NULL;
-
-	ret->meth = ECDSA_get_default_method();
-	ret->engine = engine;
-#ifndef OPENSSL_NO_ENGINE
-	if (!ret->engine)
-		ret->engine = ENGINE_get_default_ECDSA();
-	if (ret->engine)
-	{
-		ret->meth = ENGINE_get_ECDSA(ret->engine);
-		if (!ret->meth)
-		{
-			ECDSAerr(ECDSA_F_ECDSA_DATA_NEW_METHOD, ERR_R_ENGINE_LIB);
-			ENGINE_finish(ret->engine);
-			OPENSSL_free(ret);
-			return NULL;
-		}
-	}
-#endif
-
-	ret->flags = ret->meth->flags;
-	CRYPTO_new_ex_data(CRYPTO_EX_INDEX_ECDSA, ret, &ret->ex_data);
-#if 0
-	if ((ret->meth->init != NULL) && !ret->meth->init(ret))
-	{
-		CRYPTO_free_ex_data(CRYPTO_EX_INDEX_ECDSA, ret, &ret->ex_data);
-		OPENSSL_free(ret);
-		ret=NULL;
-	}
-#endif	
-	return(ret);
-}
-
-static void *ecdsa_data_new(void)
-{
-	return (void *)ECDSA_DATA_new_method(NULL);
-}
-
-static void *ecdsa_data_dup(void *data)
-{
-	ECDSA_DATA *r = (ECDSA_DATA *)data;
-
-	/* XXX: dummy operation */
-	if (r == NULL)
-		return NULL;
-
-	return ecdsa_data_new();
-}
-
-static void ecdsa_data_free(void *data)
-{
-	ECDSA_DATA *r = (ECDSA_DATA *)data;
-
-#ifndef OPENSSL_NO_ENGINE
-	if (r->engine)
-		ENGINE_finish(r->engine);
-#endif
-	CRYPTO_free_ex_data(CRYPTO_EX_INDEX_ECDSA, r, &r->ex_data);
-
-	OPENSSL_cleanse((void *)r, sizeof(ECDSA_DATA));
-
-	OPENSSL_free(r);
-}
-
-ECDSA_DATA *ecdsa_check(EC_KEY *key)
-{
-	ECDSA_DATA *ecdsa_data;
- 
-	void *data = EC_KEY_get_key_method_data(key, ecdsa_data_dup,
-					ecdsa_data_free, ecdsa_data_free);
-	if (data == NULL)
-	{
-		ecdsa_data = (ECDSA_DATA *)ecdsa_data_new();
-		if (ecdsa_data == NULL)
-			return NULL;
-		EC_KEY_insert_key_method_data(key, (void *)ecdsa_data,
-			ecdsa_data_dup, ecdsa_data_free, ecdsa_data_free);
-	}
-	else
-		ecdsa_data = (ECDSA_DATA *)data;
-	
-
-	return ecdsa_data;
-}
-
-int ECDSA_size(const EC_KEY *r)
-{
-	int ret,i;
-	ASN1_INTEGER bs;
-	BIGNUM	*order=NULL;
-	unsigned char buf[4];
-	const EC_GROUP *group;
-
-	if (r == NULL)
-		return 0;
-	group = EC_KEY_get0_group(r);
-	if (group == NULL)
-		return 0;
-
-	if ((order = BN_new()) == NULL) return 0;
-	if (!EC_GROUP_get_order(group,order,NULL))
-	{
-		BN_clear_free(order);
-		return 0;
-	} 
-	i=BN_num_bits(order);
-	bs.length=(i+7)/8;
-	bs.data=buf;
-	bs.type=V_ASN1_INTEGER;
-	/* If the top bit is set the asn1 encoding is 1 larger. */
-	buf[0]=0xff;	
-
-	i=i2d_ASN1_INTEGER(&bs,NULL);
-	i+=i; /* r and s */
-	ret=ASN1_object_size(1,i,V_ASN1_SEQUENCE);
-	BN_clear_free(order);
-	return(ret);
-}
-
-
-int ECDSA_get_ex_new_index(long argl, void *argp, CRYPTO_EX_new *new_func,
-	     CRYPTO_EX_dup *dup_func, CRYPTO_EX_free *free_func)
-{
-	return CRYPTO_get_ex_new_index(CRYPTO_EX_INDEX_ECDSA, argl, argp,
-				new_func, dup_func, free_func);
-}
-
-int ECDSA_set_ex_data(EC_KEY *d, int idx, void *arg)
-{
-	ECDSA_DATA *ecdsa;
-	ecdsa = ecdsa_check(d);
-	if (ecdsa == NULL)
-		return 0;
-	return(CRYPTO_set_ex_data(&ecdsa->ex_data,idx,arg));
-}
-
-void *ECDSA_get_ex_data(EC_KEY *d, int idx)
-{
-	ECDSA_DATA *ecdsa;
-	ecdsa = ecdsa_check(d);
-	if (ecdsa == NULL)
-		return NULL;
-	return(CRYPTO_get_ex_data(&ecdsa->ex_data,idx));
-}
diff --git a/crypto/openssl/crypto/ecdsa/ecs_locl.h b/crypto/openssl/crypto/ecdsa/ecs_locl.h
deleted file mode 100644
index 3a69a840e211..000000000000
--- a/crypto/openssl/crypto/ecdsa/ecs_locl.h
+++ /dev/null
@@ -1,107 +0,0 @@
-/* crypto/ecdsa/ecs_locl.h */
-/*
- * Written by Nils Larsch for the OpenSSL project
- */
-/* ====================================================================
- * Copyright (c) 2000-2005 The OpenSSL Project.  All rights reserved.
- *
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions
- * are met:
- *
- * 1. Redistributions of source code must retain the above copyright
- *    notice, this list of conditions and the following disclaimer. 
- *
- * 2. Redistributions in binary form must reproduce the above copyright
- *    notice, this list of conditions and the following disclaimer in
- *    the documentation and/or other materials provided with the
- *    distribution.
- *
- * 3. All advertising materials mentioning features or use of this
- *    software must display the following acknowledgment:
- *    "This product includes software developed by the OpenSSL Project
- *    for use in the OpenSSL Toolkit. (http://www.OpenSSL.org/)"
- *
- * 4. The names "OpenSSL Toolkit" and "OpenSSL Project" must not be used to
- *    endorse or promote products derived from this software without
- *    prior written permission. For written permission, please contact
- *    licensing@OpenSSL.org.
- *
- * 5. Products derived from this software may not be called "OpenSSL"
- *    nor may "OpenSSL" appear in their names without prior written
- *    permission of the OpenSSL Project.
- *
- * 6. Redistributions of any form whatsoever must retain the following
- *    acknowledgment:
- *    "This product includes software developed by the OpenSSL Project
- *    for use in the OpenSSL Toolkit (http://www.OpenSSL.org/)"
- *
- * THIS SOFTWARE IS PROVIDED BY THE OpenSSL PROJECT ``AS IS'' AND ANY
- * EXPRESSED OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
- * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR
- * PURPOSE ARE DISCLAIMED.  IN NO EVENT SHALL THE OpenSSL PROJECT OR
- * ITS CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
- * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
- * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
- * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
- * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
- * STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
- * ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED
- * OF THE POSSIBILITY OF SUCH DAMAGE.
- * ====================================================================
- *
- * This product includes cryptographic software written by Eric Young
- * (eay@cryptsoft.com).  This product includes software written by Tim
- * Hudson (tjh@cryptsoft.com).
- *
- */
-
-#ifndef HEADER_ECS_LOCL_H
-#define HEADER_ECS_LOCL_H
-
-#include <openssl/ecdsa.h>
-
-#ifdef  __cplusplus
-extern "C" {
-#endif
-
-struct ecdsa_method 
-	{
-	const char *name;
-	ECDSA_SIG *(*ecdsa_do_sign)(const unsigned char *dgst, int dgst_len, 
-			const BIGNUM *inv, const BIGNUM *rp, EC_KEY *eckey);
-	int (*ecdsa_sign_setup)(EC_KEY *eckey, BN_CTX *ctx, BIGNUM **kinv, 
-			BIGNUM **r);
-	int (*ecdsa_do_verify)(const unsigned char *dgst, int dgst_len, 
-			const ECDSA_SIG *sig, EC_KEY *eckey);
-#if 0
-	int (*init)(EC_KEY *eckey);
-	int (*finish)(EC_KEY *eckey);
-#endif
-	int flags;
-	char *app_data;
-	};
-
-typedef struct ecdsa_data_st {
-	/* EC_KEY_METH_DATA part */
-	int (*init)(EC_KEY *);
-	/* method (ECDSA) specific part */
-	ENGINE	*engine;
-	int	flags;
-	const ECDSA_METHOD *meth;
-	CRYPTO_EX_DATA ex_data;
-} ECDSA_DATA;
-
-/** ecdsa_check
- * checks whether ECKEY->meth_data is a pointer to a ECDSA_DATA structure
- * and if not it removes the old meth_data and creates a ECDSA_DATA structure.
- * \param  eckey pointer to a EC_KEY object
- * \return pointer to a ECDSA_DATA structure
- */
-ECDSA_DATA *ecdsa_check(EC_KEY *eckey);
-
-#ifdef  __cplusplus
-}
-#endif
-
-#endif /* HEADER_ECS_LOCL_H */
diff --git a/crypto/openssl/crypto/ecdsa/ecs_ossl.c b/crypto/openssl/crypto/ecdsa/ecs_ossl.c
deleted file mode 100644
index 32d66a97741d..000000000000
--- a/crypto/openssl/crypto/ecdsa/ecs_ossl.c
+++ /dev/null
@@ -1,455 +0,0 @@
-/* crypto/ecdsa/ecs_ossl.c */
-/*
- * Written by Nils Larsch for the OpenSSL project
- */
-/* ====================================================================
- * Copyright (c) 1998-2004 The OpenSSL Project.  All rights reserved.
- *
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions
- * are met:
- *
- * 1. Redistributions of source code must retain the above copyright
- *    notice, this list of conditions and the following disclaimer. 
- *
- * 2. Redistributions in binary form must reproduce the above copyright
- *    notice, this list of conditions and the following disclaimer in
- *    the documentation and/or other materials provided with the
- *    distribution.
- *
- * 3. All advertising materials mentioning features or use of this
- *    software must display the following acknowledgment:
- *    "This product includes software developed by the OpenSSL Project
- *    for use in the OpenSSL Toolkit. (http://www.OpenSSL.org/)"
- *
- * 4. The names "OpenSSL Toolkit" and "OpenSSL Project" must not be used to
- *    endorse or promote products derived from this software without
- *    prior written permission. For written permission, please contact
- *    openssl-core@OpenSSL.org.
- *
- * 5. Products derived from this software may not be called "OpenSSL"
- *    nor may "OpenSSL" appear in their names without prior written
- *    permission of the OpenSSL Project.
- *
- * 6. Redistributions of any form whatsoever must retain the following
- *    acknowledgment:
- *    "This product includes software developed by the OpenSSL Project
- *    for use in the OpenSSL Toolkit (http://www.OpenSSL.org/)"
- *
- * THIS SOFTWARE IS PROVIDED BY THE OpenSSL PROJECT ``AS IS'' AND ANY
- * EXPRESSED OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
- * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR
- * PURPOSE ARE DISCLAIMED.  IN NO EVENT SHALL THE OpenSSL PROJECT OR
- * ITS CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
- * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
- * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
- * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
- * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
- * STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
- * ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED
- * OF THE POSSIBILITY OF SUCH DAMAGE.
- * ====================================================================
- *
- * This product includes cryptographic software written by Eric Young
- * (eay@cryptsoft.com).  This product includes software written by Tim
- * Hudson (tjh@cryptsoft.com).
- *
- */
-
-#include "ecs_locl.h"
-#include <openssl/err.h>
-#include <openssl/obj_mac.h>
-#include <openssl/bn.h>
-
-static ECDSA_SIG *ecdsa_do_sign(const unsigned char *dgst, int dlen, 
-		const BIGNUM *, const BIGNUM *, EC_KEY *eckey);
-static int ecdsa_sign_setup(EC_KEY *eckey, BN_CTX *ctx_in, BIGNUM **kinvp, 
-		BIGNUM **rp);
-static int ecdsa_do_verify(const unsigned char *dgst, int dgst_len, 
-		const ECDSA_SIG *sig, EC_KEY *eckey);
-
-static ECDSA_METHOD openssl_ecdsa_meth = {
-	"OpenSSL ECDSA method",
-	ecdsa_do_sign,
-	ecdsa_sign_setup,
-	ecdsa_do_verify,
-#if 0
-	NULL, /* init     */
-	NULL, /* finish   */
-#endif
-	0,    /* flags    */
-	NULL  /* app_data */
-};
-
-const ECDSA_METHOD *ECDSA_OpenSSL(void)
-{
-	return &openssl_ecdsa_meth;
-}
-
-static int ecdsa_sign_setup(EC_KEY *eckey, BN_CTX *ctx_in, BIGNUM **kinvp,
-		BIGNUM **rp)
-{
-	BN_CTX   *ctx = NULL;
-	BIGNUM	 *k = NULL, *r = NULL, *order = NULL, *X = NULL;
-	EC_POINT *tmp_point=NULL;
-	const EC_GROUP *group;
-	int 	 ret = 0;
-
-	if (eckey == NULL || (group = EC_KEY_get0_group(eckey)) == NULL)
-	{
-		ECDSAerr(ECDSA_F_ECDSA_SIGN_SETUP, ERR_R_PASSED_NULL_PARAMETER);
-		return 0;
-	}
-
-	if (ctx_in == NULL) 
-	{
-		if ((ctx = BN_CTX_new()) == NULL)
-		{
-			ECDSAerr(ECDSA_F_ECDSA_SIGN_SETUP,ERR_R_MALLOC_FAILURE);
-			return 0;
-		}
-	}
-	else
-		ctx = ctx_in;
-
-	k     = BN_new();	/* this value is later returned in *kinvp */
-	r     = BN_new();	/* this value is later returned in *rp    */
-	order = BN_new();
-	X     = BN_new();
-	if (!k || !r || !order || !X)
-	{
-		ECDSAerr(ECDSA_F_ECDSA_SIGN_SETUP, ERR_R_MALLOC_FAILURE);
-		goto err;
-	}
-	if ((tmp_point = EC_POINT_new(group)) == NULL)
-	{
-		ECDSAerr(ECDSA_F_ECDSA_SIGN_SETUP, ERR_R_EC_LIB);
-		goto err;
-	}
-	if (!EC_GROUP_get_order(group, order, ctx))
-	{
-		ECDSAerr(ECDSA_F_ECDSA_SIGN_SETUP, ERR_R_EC_LIB);
-		goto err;
-	}
-	
-	do
-	{
-		/* get random k */	
-		do
-			if (!BN_rand_range(k, order))
-			{
-				ECDSAerr(ECDSA_F_ECDSA_SIGN_SETUP,
-				 ECDSA_R_RANDOM_NUMBER_GENERATION_FAILED);	
-				goto err;
-			}
-		while (BN_is_zero(k));
-
-		/* compute r the x-coordinate of generator * k */
-		if (!EC_POINT_mul(group, tmp_point, k, NULL, NULL, ctx))
-		{
-			ECDSAerr(ECDSA_F_ECDSA_SIGN_SETUP, ERR_R_EC_LIB);
-			goto err;
-		}
-		if (EC_METHOD_get_field_type(EC_GROUP_method_of(group)) == NID_X9_62_prime_field)
-		{
-			if (!EC_POINT_get_affine_coordinates_GFp(group,
-				tmp_point, X, NULL, ctx))
-			{
-				ECDSAerr(ECDSA_F_ECDSA_SIGN_SETUP,ERR_R_EC_LIB);
-				goto err;
-			}
-		}
-		else /* NID_X9_62_characteristic_two_field */
-		{
-			if (!EC_POINT_get_affine_coordinates_GF2m(group,
-				tmp_point, X, NULL, ctx))
-			{
-				ECDSAerr(ECDSA_F_ECDSA_SIGN_SETUP,ERR_R_EC_LIB);
-				goto err;
-			}
-		}
-		if (!BN_nnmod(r, X, order, ctx))
-		{
-			ECDSAerr(ECDSA_F_ECDSA_SIGN_SETUP, ERR_R_BN_LIB);
-			goto err;
-		}
-	}
-	while (BN_is_zero(r));
-
-	/* compute the inverse of k */
-	if (!BN_mod_inverse(k, k, order, ctx))
-	{
-		ECDSAerr(ECDSA_F_ECDSA_SIGN_SETUP, ERR_R_BN_LIB);
-		goto err;	
-	}
-	/* clear old values if necessary */
-	if (*rp != NULL)
-		BN_clear_free(*rp);
-	if (*kinvp != NULL) 
-		BN_clear_free(*kinvp);
-	/* save the pre-computed values  */
-	*rp    = r;
-	*kinvp = k;
-	ret = 1;
-err:
-	if (!ret)
-	{
-		if (k != NULL) BN_clear_free(k);
-		if (r != NULL) BN_clear_free(r);
-	}
-	if (ctx_in == NULL) 
-		BN_CTX_free(ctx);
-	if (order != NULL)
-		BN_free(order);
-	if (tmp_point != NULL) 
-		EC_POINT_free(tmp_point);
-	if (X)
-		BN_clear_free(X);
-	return(ret);
-}
-
-
-static ECDSA_SIG *ecdsa_do_sign(const unsigned char *dgst, int dgst_len, 
-		const BIGNUM *in_kinv, const BIGNUM *in_r, EC_KEY *eckey)
-{
-	int     ok = 0;
-	BIGNUM *kinv=NULL, *s, *m=NULL,*tmp=NULL,*order=NULL;
-	const BIGNUM *ckinv;
-	BN_CTX     *ctx = NULL;
-	const EC_GROUP   *group;
-	ECDSA_SIG  *ret;
-	ECDSA_DATA *ecdsa;
-	const BIGNUM *priv_key;
-
-	ecdsa    = ecdsa_check(eckey);
-	group    = EC_KEY_get0_group(eckey);
-	priv_key = EC_KEY_get0_private_key(eckey);
-	
-	if (group == NULL || priv_key == NULL || ecdsa == NULL)
-	{
-		ECDSAerr(ECDSA_F_ECDSA_DO_SIGN, ERR_R_PASSED_NULL_PARAMETER);
-		return NULL;
-	}
-
-	ret = ECDSA_SIG_new();
-	if (!ret)
-	{
-		ECDSAerr(ECDSA_F_ECDSA_DO_SIGN, ERR_R_MALLOC_FAILURE);
-		return NULL;
-	}
-	s = ret->s;
-
-	if ((ctx = BN_CTX_new()) == NULL || (order = BN_new()) == NULL ||
-		(tmp = BN_new()) == NULL || (m = BN_new()) == NULL)
-	{
-		ECDSAerr(ECDSA_F_ECDSA_DO_SIGN, ERR_R_MALLOC_FAILURE);
-		goto err;
-	}
-
-	if (!EC_GROUP_get_order(group, order, ctx))
-	{
-		ECDSAerr(ECDSA_F_ECDSA_DO_SIGN, ERR_R_EC_LIB);
-		goto err;
-	}
-	if (dgst_len > BN_num_bytes(order))
-	{
-		ECDSAerr(ECDSA_F_ECDSA_DO_SIGN,
-			ECDSA_R_DATA_TOO_LARGE_FOR_KEY_SIZE);
-		goto err;
-	}
-
-	if (!BN_bin2bn(dgst, dgst_len, m))
-	{
-		ECDSAerr(ECDSA_F_ECDSA_DO_SIGN, ERR_R_BN_LIB);
-		goto err;
-	}
-	do
-	{
-		if (in_kinv == NULL || in_r == NULL)
-		{
-			if (!ECDSA_sign_setup(eckey, ctx, &kinv, &ret->r))
-			{
-				ECDSAerr(ECDSA_F_ECDSA_DO_SIGN,ERR_R_ECDSA_LIB);
-				goto err;
-			}
-			ckinv = kinv;
-		}
-		else
-		{
-			ckinv  = in_kinv;
-			if (BN_copy(ret->r, in_r) == NULL)
-			{
-				ECDSAerr(ECDSA_F_ECDSA_DO_SIGN, ERR_R_MALLOC_FAILURE);
-				goto err;
-			}
-		}
-
-		if (!BN_mod_mul(tmp, priv_key, ret->r, order, ctx))
-		{
-			ECDSAerr(ECDSA_F_ECDSA_DO_SIGN, ERR_R_BN_LIB);
-			goto err;
-		}
-		if (!BN_mod_add_quick(s, tmp, m, order))
-		{
-			ECDSAerr(ECDSA_F_ECDSA_DO_SIGN, ERR_R_BN_LIB);
-			goto err;
-		}
-		if (!BN_mod_mul(s, s, ckinv, order, ctx))
-		{
-			ECDSAerr(ECDSA_F_ECDSA_DO_SIGN, ERR_R_BN_LIB);
-			goto err;
-		}
-		if (BN_is_zero(s))
-		{
-			/* if kinv and r have been supplied by the caller
-			 * don't to generate new kinv and r values */
-			if (in_kinv != NULL && in_r != NULL)
-			{
-				ECDSAerr(ECDSA_F_ECDSA_DO_SIGN, ECDSA_R_NEED_NEW_SETUP_VALUES);
-				goto err;
-			}
-		}
-		else
-			/* s != 0 => we have a valid signature */
-			break;
-	}
-	while (1);
-
-	ok = 1;
-err:
-	if (!ok)
-	{
-		ECDSA_SIG_free(ret);
-		ret = NULL;
-	}
-	if (ctx)
-		BN_CTX_free(ctx);
-	if (m)
-		BN_clear_free(m);
-	if (tmp)
-		BN_clear_free(tmp);
-	if (order)
-		BN_free(order);
-	if (kinv)
-		BN_clear_free(kinv);
-	return ret;
-}
-
-static int ecdsa_do_verify(const unsigned char *dgst, int dgst_len,
-		const ECDSA_SIG *sig, EC_KEY *eckey)
-{
-	int ret = -1;
-	BN_CTX   *ctx;
-	BIGNUM   *order, *u1, *u2, *m, *X;
-	EC_POINT *point = NULL;
-	const EC_GROUP *group;
-	const EC_POINT *pub_key;
-
-	/* check input values */
-	if (eckey == NULL || (group = EC_KEY_get0_group(eckey)) == NULL ||
-	    (pub_key = EC_KEY_get0_public_key(eckey)) == NULL || sig == NULL)
-	{
-		ECDSAerr(ECDSA_F_ECDSA_DO_VERIFY, ECDSA_R_MISSING_PARAMETERS);
-		return -1;
-	}
-
-	ctx = BN_CTX_new();
-	if (!ctx)
-	{
-		ECDSAerr(ECDSA_F_ECDSA_DO_VERIFY, ERR_R_MALLOC_FAILURE);
-		return -1;
-	}
-	BN_CTX_start(ctx);
-	order = BN_CTX_get(ctx);	
-	u1    = BN_CTX_get(ctx);
-	u2    = BN_CTX_get(ctx);
-	m     = BN_CTX_get(ctx);
-	X     = BN_CTX_get(ctx);
-	if (!X)
-	{
-		ECDSAerr(ECDSA_F_ECDSA_DO_VERIFY, ERR_R_BN_LIB);
-		goto err;
-	}
-	
-	if (!EC_GROUP_get_order(group, order, ctx))
-	{
-		ECDSAerr(ECDSA_F_ECDSA_DO_VERIFY, ERR_R_EC_LIB);
-		goto err;
-	}
-
-	if (BN_is_zero(sig->r)          || BN_is_negative(sig->r) || 
-	    BN_ucmp(sig->r, order) >= 0 || BN_is_zero(sig->s)  ||
-	    BN_is_negative(sig->s)      || BN_ucmp(sig->s, order) >= 0)
-	{
-		ECDSAerr(ECDSA_F_ECDSA_DO_VERIFY, ECDSA_R_BAD_SIGNATURE);
-		ret = 0;	/* signature is invalid */
-		goto err;
-	}
-	/* calculate tmp1 = inv(S) mod order */
-	if (!BN_mod_inverse(u2, sig->s, order, ctx))
-	{
-		ECDSAerr(ECDSA_F_ECDSA_DO_VERIFY, ERR_R_BN_LIB);
-		goto err;
-	}
-	/* digest -> m */
-	if (!BN_bin2bn(dgst, dgst_len, m))
-	{
-		ECDSAerr(ECDSA_F_ECDSA_DO_VERIFY, ERR_R_BN_LIB);
-		goto err;
-	}
-	/* u1 = m * tmp mod order */
-	if (!BN_mod_mul(u1, m, u2, order, ctx))
-	{
-		ECDSAerr(ECDSA_F_ECDSA_DO_VERIFY, ERR_R_BN_LIB);
-		goto err;
-	}
-	/* u2 = r * w mod q */
-	if (!BN_mod_mul(u2, sig->r, u2, order, ctx))
-	{
-		ECDSAerr(ECDSA_F_ECDSA_DO_VERIFY, ERR_R_BN_LIB);
-		goto err;
-	}
-
-	if ((point = EC_POINT_new(group)) == NULL)
-	{
-		ECDSAerr(ECDSA_F_ECDSA_DO_VERIFY, ERR_R_MALLOC_FAILURE);
-		goto err;
-	}
-	if (!EC_POINT_mul(group, point, u1, pub_key, u2, ctx))
-	{
-		ECDSAerr(ECDSA_F_ECDSA_DO_VERIFY, ERR_R_EC_LIB);
-		goto err;
-	}
-	if (EC_METHOD_get_field_type(EC_GROUP_method_of(group)) == NID_X9_62_prime_field)
-	{
-		if (!EC_POINT_get_affine_coordinates_GFp(group,
-			point, X, NULL, ctx))
-		{
-			ECDSAerr(ECDSA_F_ECDSA_DO_VERIFY, ERR_R_EC_LIB);
-			goto err;
-		}
-	}
-	else /* NID_X9_62_characteristic_two_field */
-	{
-		if (!EC_POINT_get_affine_coordinates_GF2m(group,
-			point, X, NULL, ctx))
-		{
-			ECDSAerr(ECDSA_F_ECDSA_DO_VERIFY, ERR_R_EC_LIB);
-			goto err;
-		}
-	}
-	
-	if (!BN_nnmod(u1, X, order, ctx))
-	{
-		ECDSAerr(ECDSA_F_ECDSA_DO_VERIFY, ERR_R_BN_LIB);
-		goto err;
-	}
-	/*  if the signature is correct u1 is equal to sig->r */
-	ret = (BN_ucmp(u1, sig->r) == 0);
-err:
-	BN_CTX_end(ctx);
-	BN_CTX_free(ctx);
-	if (point)
-		EC_POINT_free(point);
-	return ret;
-}
diff --git a/crypto/openssl/crypto/ecdsa/ecs_sign.c b/crypto/openssl/crypto/ecdsa/ecs_sign.c
deleted file mode 100644
index 74b1fe8caff4..000000000000
--- a/crypto/openssl/crypto/ecdsa/ecs_sign.c
+++ /dev/null
@@ -1,104 +0,0 @@
-/* crypto/ecdsa/ecdsa_sign.c */
-/* ====================================================================
- * Copyright (c) 1998-2002 The OpenSSL Project.  All rights reserved.
- *
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions
- * are met:
- *
- * 1. Redistributions of source code must retain the above copyright
- *    notice, this list of conditions and the following disclaimer. 
- *
- * 2. Redistributions in binary form must reproduce the above copyright
- *    notice, this list of conditions and the following disclaimer in
- *    the documentation and/or other materials provided with the
- *    distribution.
- *
- * 3. All advertising materials mentioning features or use of this
- *    software must display the following acknowledgment:
- *    "This product includes software developed by the OpenSSL Project
- *    for use in the OpenSSL Toolkit. (http://www.OpenSSL.org/)"
- *
- * 4. The names "OpenSSL Toolkit" and "OpenSSL Project" must not be used to
- *    endorse or promote products derived from this software without
- *    prior written permission. For written permission, please contact
- *    openssl-core@OpenSSL.org.
- *
- * 5. Products derived from this software may not be called "OpenSSL"
- *    nor may "OpenSSL" appear in their names without prior written
- *    permission of the OpenSSL Project.
- *
- * 6. Redistributions of any form whatsoever must retain the following
- *    acknowledgment:
- *    "This product includes software developed by the OpenSSL Project
- *    for use in the OpenSSL Toolkit (http://www.OpenSSL.org/)"
- *
- * THIS SOFTWARE IS PROVIDED BY THE OpenSSL PROJECT ``AS IS'' AND ANY
- * EXPRESSED OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
- * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR
- * PURPOSE ARE DISCLAIMED.  IN NO EVENT SHALL THE OpenSSL PROJECT OR
- * ITS CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
- * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
- * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
- * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
- * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
- * STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
- * ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED
- * OF THE POSSIBILITY OF SUCH DAMAGE.
- * ====================================================================
- *
- * This product includes cryptographic software written by Eric Young
- * (eay@cryptsoft.com).  This product includes software written by Tim
- * Hudson (tjh@cryptsoft.com).
- *
- */
-
-#include "ecs_locl.h"
-#ifndef OPENSSL_NO_ENGINE
-#include <openssl/engine.h>
-#endif
-
-ECDSA_SIG *ECDSA_do_sign(const unsigned char *dgst, int dlen, EC_KEY *eckey)
-{
-	return ECDSA_do_sign_ex(dgst, dlen, NULL, NULL, eckey);
-}
-
-ECDSA_SIG *ECDSA_do_sign_ex(const unsigned char *dgst, int dlen,
-	const BIGNUM *kinv, const BIGNUM *rp, EC_KEY *eckey)
-{
-	ECDSA_DATA *ecdsa = ecdsa_check(eckey);
-	if (ecdsa == NULL)
-		return NULL;
-	return ecdsa->meth->ecdsa_do_sign(dgst, dlen, kinv, rp, eckey);
-}
-
-int ECDSA_sign(int type, const unsigned char *dgst, int dlen, unsigned char 
-		*sig, unsigned int *siglen, EC_KEY *eckey)
-{
-	return ECDSA_sign_ex(type, dgst, dlen, sig, siglen, NULL, NULL, eckey);
-}
-
-int ECDSA_sign_ex(int type, const unsigned char *dgst, int dlen, unsigned char 
-	*sig, unsigned int *siglen, const BIGNUM *kinv, const BIGNUM *r, 
-	EC_KEY *eckey)
-{
-	ECDSA_SIG *s;
-	s = ECDSA_do_sign_ex(dgst, dlen, kinv, r, eckey);
-	if (s == NULL)
-	{
-		*siglen=0;
-		return 0;
-	}
-	*siglen = i2d_ECDSA_SIG(s, &sig);
-	ECDSA_SIG_free(s);
-	return 1;
-}
-
-int ECDSA_sign_setup(EC_KEY *eckey, BN_CTX *ctx_in, BIGNUM **kinvp, 
-		BIGNUM **rp)
-{
-	ECDSA_DATA *ecdsa = ecdsa_check(eckey);
-	if (ecdsa == NULL)
-		return 0;
-	return ecdsa->meth->ecdsa_sign_setup(eckey, ctx_in, kinvp, rp); 
-}
diff --git a/crypto/openssl/crypto/ecdsa/ecs_vrf.c b/crypto/openssl/crypto/ecdsa/ecs_vrf.c
deleted file mode 100644
index ef9acf7b6102..000000000000
--- a/crypto/openssl/crypto/ecdsa/ecs_vrf.c
+++ /dev/null
@@ -1,96 +0,0 @@
-/* crypto/ecdsa/ecdsa_vrf.c */
-/*
- * Written by Nils Larsch for the OpenSSL project
- */
-/* ====================================================================
- * Copyright (c) 1998-2002 The OpenSSL Project.  All rights reserved.
- *
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions
- * are met:
- *
- * 1. Redistributions of source code must retain the above copyright
- *    notice, this list of conditions and the following disclaimer. 
- *
- * 2. Redistributions in binary form must reproduce the above copyright
- *    notice, this list of conditions and the following disclaimer in
- *    the documentation and/or other materials provided with the
- *    distribution.
- *
- * 3. All advertising materials mentioning features or use of this
- *    software must display the following acknowledgment:
- *    "This product includes software developed by the OpenSSL Project
- *    for use in the OpenSSL Toolkit. (http://www.OpenSSL.org/)"
- *
- * 4. The names "OpenSSL Toolkit" and "OpenSSL Project" must not be used to
- *    endorse or promote products derived from this software without
- *    prior written permission. For written permission, please contact
- *    openssl-core@OpenSSL.org.
- *
- * 5. Products derived from this software may not be called "OpenSSL"
- *    nor may "OpenSSL" appear in their names without prior written
- *    permission of the OpenSSL Project.
- *
- * 6. Redistributions of any form whatsoever must retain the following
- *    acknowledgment:
- *    "This product includes software developed by the OpenSSL Project
- *    for use in the OpenSSL Toolkit (http://www.OpenSSL.org/)"
- *
- * THIS SOFTWARE IS PROVIDED BY THE OpenSSL PROJECT ``AS IS'' AND ANY
- * EXPRESSED OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
- * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR
- * PURPOSE ARE DISCLAIMED.  IN NO EVENT SHALL THE OpenSSL PROJECT OR
- * ITS CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
- * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
- * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
- * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
- * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
- * STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
- * ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED
- * OF THE POSSIBILITY OF SUCH DAMAGE.
- * ====================================================================
- *
- * This product includes cryptographic software written by Eric Young
- * (eay@cryptsoft.com).  This product includes software written by Tim
- * Hudson (tjh@cryptsoft.com).
- *
- */
-
-#include "ecs_locl.h"
-#ifndef OPENSSL_NO_ENGINE
-#include <openssl/engine.h>
-#endif
-
-/* returns
- *      1: correct signature
- *      0: incorrect signature
- *     -1: error
- */
-int ECDSA_do_verify(const unsigned char *dgst, int dgst_len, 
-		const ECDSA_SIG *sig, EC_KEY *eckey)
-	{
-	ECDSA_DATA *ecdsa = ecdsa_check(eckey);
-	if (ecdsa == NULL)
-		return 0;
-	return ecdsa->meth->ecdsa_do_verify(dgst, dgst_len, sig, eckey);
-	}
-
-/* returns
- *      1: correct signature
- *      0: incorrect signature
- *     -1: error
- */
-int ECDSA_verify(int type, const unsigned char *dgst, int dgst_len,
-		const unsigned char *sigbuf, int sig_len, EC_KEY *eckey)
- 	{
-	ECDSA_SIG *s;
-	int ret=-1;
-
-	s = ECDSA_SIG_new();
-	if (s == NULL) return(ret);
-	if (d2i_ECDSA_SIG(&s, &sigbuf, sig_len) == NULL) goto err;
-	ret=ECDSA_do_verify(dgst, dgst_len, s, eckey);
-err:
-	ECDSA_SIG_free(s);
-	return(ret);
-	}
diff --git a/crypto/openssl/crypto/engine/Makefile b/crypto/openssl/crypto/engine/Makefile
deleted file mode 100644
index 13f211a0aef8..000000000000
--- a/crypto/openssl/crypto/engine/Makefile
+++ /dev/null
@@ -1,288 +0,0 @@
-#
-# OpenSSL/crypto/engine/Makefile
-#
-
-DIR=	engine
-TOP=	../..
-CC=	cc
-INCLUDES= -I.. -I$(TOP) -I../../include
-CFLAG=-g
-MAKEFILE=	Makefile
-AR=		ar r
-
-CFLAGS= $(INCLUDES) $(CFLAG)
-
-GENERAL=Makefile
-TEST= enginetest.c
-APPS=
-
-LIB=$(TOP)/libcrypto.a
-LIBSRC= eng_err.c eng_lib.c eng_list.c eng_init.c eng_ctrl.c \
-	eng_table.c eng_pkey.c eng_fat.c eng_all.c \
-	tb_rsa.c tb_dsa.c tb_ecdsa.c tb_dh.c tb_ecdh.c tb_rand.c tb_store.c \
-	tb_cipher.c tb_digest.c \
-	eng_openssl.c eng_cnf.c eng_dyn.c eng_cryptodev.c eng_padlock.c
-LIBOBJ= eng_err.o eng_lib.o eng_list.o eng_init.o eng_ctrl.o \
-	eng_table.o eng_pkey.o eng_fat.o eng_all.o \
-	tb_rsa.o tb_dsa.o tb_ecdsa.o tb_dh.o tb_ecdh.o tb_rand.o tb_store.o \
-	tb_cipher.o tb_digest.o \
-	eng_openssl.o eng_cnf.o eng_dyn.o eng_cryptodev.o eng_padlock.o
-
-SRC= $(LIBSRC)
-
-EXHEADER= engine.h
-HEADER=	$(EXHEADER)
-
-ALL=    $(GENERAL) $(SRC) $(HEADER)
-
-top:
-	(cd ../..; $(MAKE) DIRS=crypto SDIRS=$(DIR) sub_all)
-
-all:	lib
-
-lib:	$(LIBOBJ)
-	$(AR) $(LIB) $(LIBOBJ)
-	$(RANLIB) $(LIB) || echo Never mind.
-	@touch lib
-
-files:
-	$(PERL) $(TOP)/util/files.pl Makefile >> $(TOP)/MINFO
-
-links:
-	@$(PERL) $(TOP)/util/mklink.pl ../../include/openssl $(EXHEADER)
-	@$(PERL) $(TOP)/util/mklink.pl ../../test $(TEST)
-	@$(PERL) $(TOP)/util/mklink.pl ../../apps $(APPS)
-
-install:
-	@[ -n "$(INSTALLTOP)" ] # should be set by top Makefile...
-	@headerlist="$(EXHEADER)"; for i in $$headerlist ; \
-	do  \
-	(cp $$i $(INSTALL_PREFIX)$(INSTALLTOP)/include/openssl/$$i; \
-	chmod 644 $(INSTALL_PREFIX)$(INSTALLTOP)/include/openssl/$$i ); \
-	done;
-
-tags:
-	ctags $(SRC)
-
-tests:
-
-lint:
-	lint -DLINT $(INCLUDES) $(SRC)>fluff
-
-depend:
-	@[ -n "$(MAKEDEPEND)" ] # should be set by upper Makefile...
-	$(MAKEDEPEND) -- $(CFLAG) $(INCLUDES) $(DEPFLAG) -- $(PROGS) $(LIBSRC)
-
-dclean:
-	$(PERL) -pe 'if (/^# DO NOT DELETE THIS LINE/) {print; exit(0);}' $(MAKEFILE) >Makefile.new
-	mv -f Makefile.new $(MAKEFILE)
-
-clean:
-	rm -f *.o */*.o *.obj lib tags core .pure .nfs* *.old *.bak fluff
-
-# DO NOT DELETE THIS LINE -- make depend depends on it.
-
-eng_all.o: ../../e_os.h ../../include/openssl/bio.h
-eng_all.o: ../../include/openssl/buffer.h ../../include/openssl/crypto.h
-eng_all.o: ../../include/openssl/e_os2.h ../../include/openssl/engine.h
-eng_all.o: ../../include/openssl/err.h ../../include/openssl/lhash.h
-eng_all.o: ../../include/openssl/opensslconf.h ../../include/openssl/opensslv.h
-eng_all.o: ../../include/openssl/ossl_typ.h ../../include/openssl/safestack.h
-eng_all.o: ../../include/openssl/stack.h ../../include/openssl/symhacks.h
-eng_all.o: ../cryptlib.h eng_all.c eng_int.h
-eng_cnf.o: ../../e_os.h ../../include/openssl/bio.h
-eng_cnf.o: ../../include/openssl/buffer.h ../../include/openssl/conf.h
-eng_cnf.o: ../../include/openssl/crypto.h ../../include/openssl/e_os2.h
-eng_cnf.o: ../../include/openssl/engine.h ../../include/openssl/err.h
-eng_cnf.o: ../../include/openssl/lhash.h ../../include/openssl/opensslconf.h
-eng_cnf.o: ../../include/openssl/opensslv.h ../../include/openssl/ossl_typ.h
-eng_cnf.o: ../../include/openssl/safestack.h ../../include/openssl/stack.h
-eng_cnf.o: ../../include/openssl/symhacks.h ../cryptlib.h eng_cnf.c eng_int.h
-eng_cryptodev.o: ../../include/openssl/asn1.h ../../include/openssl/bio.h
-eng_cryptodev.o: ../../include/openssl/bn.h ../../include/openssl/crypto.h
-eng_cryptodev.o: ../../include/openssl/e_os2.h ../../include/openssl/engine.h
-eng_cryptodev.o: ../../include/openssl/evp.h ../../include/openssl/obj_mac.h
-eng_cryptodev.o: ../../include/openssl/objects.h
-eng_cryptodev.o: ../../include/openssl/opensslconf.h
-eng_cryptodev.o: ../../include/openssl/opensslv.h
-eng_cryptodev.o: ../../include/openssl/ossl_typ.h
-eng_cryptodev.o: ../../include/openssl/safestack.h
-eng_cryptodev.o: ../../include/openssl/stack.h ../../include/openssl/symhacks.h
-eng_cryptodev.o: eng_cryptodev.c
-eng_ctrl.o: ../../e_os.h ../../include/openssl/bio.h
-eng_ctrl.o: ../../include/openssl/buffer.h ../../include/openssl/crypto.h
-eng_ctrl.o: ../../include/openssl/e_os2.h ../../include/openssl/engine.h
-eng_ctrl.o: ../../include/openssl/err.h ../../include/openssl/lhash.h
-eng_ctrl.o: ../../include/openssl/opensslconf.h
-eng_ctrl.o: ../../include/openssl/opensslv.h ../../include/openssl/ossl_typ.h
-eng_ctrl.o: ../../include/openssl/safestack.h ../../include/openssl/stack.h
-eng_ctrl.o: ../../include/openssl/symhacks.h ../cryptlib.h eng_ctrl.c eng_int.h
-eng_dyn.o: ../../e_os.h ../../include/openssl/bio.h
-eng_dyn.o: ../../include/openssl/buffer.h ../../include/openssl/crypto.h
-eng_dyn.o: ../../include/openssl/dso.h ../../include/openssl/e_os2.h
-eng_dyn.o: ../../include/openssl/engine.h ../../include/openssl/err.h
-eng_dyn.o: ../../include/openssl/lhash.h ../../include/openssl/opensslconf.h
-eng_dyn.o: ../../include/openssl/opensslv.h ../../include/openssl/ossl_typ.h
-eng_dyn.o: ../../include/openssl/safestack.h ../../include/openssl/stack.h
-eng_dyn.o: ../../include/openssl/symhacks.h ../cryptlib.h eng_dyn.c eng_int.h
-eng_err.o: ../../include/openssl/bio.h ../../include/openssl/crypto.h
-eng_err.o: ../../include/openssl/e_os2.h ../../include/openssl/engine.h
-eng_err.o: ../../include/openssl/err.h ../../include/openssl/lhash.h
-eng_err.o: ../../include/openssl/opensslconf.h ../../include/openssl/opensslv.h
-eng_err.o: ../../include/openssl/ossl_typ.h ../../include/openssl/safestack.h
-eng_err.o: ../../include/openssl/stack.h ../../include/openssl/symhacks.h
-eng_err.o: eng_err.c
-eng_fat.o: ../../e_os.h ../../include/openssl/bio.h
-eng_fat.o: ../../include/openssl/buffer.h ../../include/openssl/conf.h
-eng_fat.o: ../../include/openssl/crypto.h ../../include/openssl/e_os2.h
-eng_fat.o: ../../include/openssl/engine.h ../../include/openssl/err.h
-eng_fat.o: ../../include/openssl/lhash.h ../../include/openssl/opensslconf.h
-eng_fat.o: ../../include/openssl/opensslv.h ../../include/openssl/ossl_typ.h
-eng_fat.o: ../../include/openssl/safestack.h ../../include/openssl/stack.h
-eng_fat.o: ../../include/openssl/symhacks.h ../cryptlib.h eng_fat.c eng_int.h
-eng_init.o: ../../e_os.h ../../include/openssl/bio.h
-eng_init.o: ../../include/openssl/buffer.h ../../include/openssl/crypto.h
-eng_init.o: ../../include/openssl/e_os2.h ../../include/openssl/engine.h
-eng_init.o: ../../include/openssl/err.h ../../include/openssl/lhash.h
-eng_init.o: ../../include/openssl/opensslconf.h
-eng_init.o: ../../include/openssl/opensslv.h ../../include/openssl/ossl_typ.h
-eng_init.o: ../../include/openssl/safestack.h ../../include/openssl/stack.h
-eng_init.o: ../../include/openssl/symhacks.h ../cryptlib.h eng_init.c eng_int.h
-eng_lib.o: ../../e_os.h ../../include/openssl/bio.h
-eng_lib.o: ../../include/openssl/buffer.h ../../include/openssl/crypto.h
-eng_lib.o: ../../include/openssl/e_os2.h ../../include/openssl/engine.h
-eng_lib.o: ../../include/openssl/err.h ../../include/openssl/lhash.h
-eng_lib.o: ../../include/openssl/opensslconf.h ../../include/openssl/opensslv.h
-eng_lib.o: ../../include/openssl/ossl_typ.h ../../include/openssl/rand.h
-eng_lib.o: ../../include/openssl/safestack.h ../../include/openssl/stack.h
-eng_lib.o: ../../include/openssl/symhacks.h ../cryptlib.h eng_int.h eng_lib.c
-eng_list.o: ../../e_os.h ../../include/openssl/bio.h
-eng_list.o: ../../include/openssl/buffer.h ../../include/openssl/crypto.h
-eng_list.o: ../../include/openssl/e_os2.h ../../include/openssl/engine.h
-eng_list.o: ../../include/openssl/err.h ../../include/openssl/lhash.h
-eng_list.o: ../../include/openssl/opensslconf.h
-eng_list.o: ../../include/openssl/opensslv.h ../../include/openssl/ossl_typ.h
-eng_list.o: ../../include/openssl/safestack.h ../../include/openssl/stack.h
-eng_list.o: ../../include/openssl/symhacks.h ../cryptlib.h eng_int.h eng_list.c
-eng_openssl.o: ../../e_os.h ../../include/openssl/asn1.h
-eng_openssl.o: ../../include/openssl/bio.h ../../include/openssl/buffer.h
-eng_openssl.o: ../../include/openssl/crypto.h ../../include/openssl/dh.h
-eng_openssl.o: ../../include/openssl/dsa.h ../../include/openssl/dso.h
-eng_openssl.o: ../../include/openssl/e_os2.h ../../include/openssl/ec.h
-eng_openssl.o: ../../include/openssl/ecdh.h ../../include/openssl/ecdsa.h
-eng_openssl.o: ../../include/openssl/engine.h ../../include/openssl/err.h
-eng_openssl.o: ../../include/openssl/evp.h ../../include/openssl/lhash.h
-eng_openssl.o: ../../include/openssl/obj_mac.h ../../include/openssl/objects.h
-eng_openssl.o: ../../include/openssl/opensslconf.h
-eng_openssl.o: ../../include/openssl/opensslv.h
-eng_openssl.o: ../../include/openssl/ossl_typ.h ../../include/openssl/pem.h
-eng_openssl.o: ../../include/openssl/pem2.h ../../include/openssl/pkcs7.h
-eng_openssl.o: ../../include/openssl/rand.h ../../include/openssl/rc4.h
-eng_openssl.o: ../../include/openssl/rsa.h ../../include/openssl/safestack.h
-eng_openssl.o: ../../include/openssl/sha.h ../../include/openssl/stack.h
-eng_openssl.o: ../../include/openssl/symhacks.h ../../include/openssl/x509.h
-eng_openssl.o: ../../include/openssl/x509_vfy.h ../cryptlib.h eng_openssl.c
-eng_padlock.o: ../../include/openssl/aes.h ../../include/openssl/asn1.h
-eng_padlock.o: ../../include/openssl/bio.h ../../include/openssl/crypto.h
-eng_padlock.o: ../../include/openssl/dso.h ../../include/openssl/e_os2.h
-eng_padlock.o: ../../include/openssl/engine.h ../../include/openssl/err.h
-eng_padlock.o: ../../include/openssl/evp.h ../../include/openssl/lhash.h
-eng_padlock.o: ../../include/openssl/obj_mac.h ../../include/openssl/objects.h
-eng_padlock.o: ../../include/openssl/opensslconf.h
-eng_padlock.o: ../../include/openssl/opensslv.h
-eng_padlock.o: ../../include/openssl/ossl_typ.h ../../include/openssl/rand.h
-eng_padlock.o: ../../include/openssl/safestack.h ../../include/openssl/stack.h
-eng_padlock.o: ../../include/openssl/symhacks.h eng_padlock.c
-eng_pkey.o: ../../e_os.h ../../include/openssl/bio.h
-eng_pkey.o: ../../include/openssl/buffer.h ../../include/openssl/crypto.h
-eng_pkey.o: ../../include/openssl/e_os2.h ../../include/openssl/engine.h
-eng_pkey.o: ../../include/openssl/err.h ../../include/openssl/lhash.h
-eng_pkey.o: ../../include/openssl/opensslconf.h
-eng_pkey.o: ../../include/openssl/opensslv.h ../../include/openssl/ossl_typ.h
-eng_pkey.o: ../../include/openssl/safestack.h ../../include/openssl/stack.h
-eng_pkey.o: ../../include/openssl/symhacks.h ../cryptlib.h eng_int.h eng_pkey.c
-eng_table.o: ../../e_os.h ../../include/openssl/asn1.h
-eng_table.o: ../../include/openssl/bio.h ../../include/openssl/buffer.h
-eng_table.o: ../../include/openssl/crypto.h ../../include/openssl/e_os2.h
-eng_table.o: ../../include/openssl/engine.h ../../include/openssl/err.h
-eng_table.o: ../../include/openssl/evp.h ../../include/openssl/lhash.h
-eng_table.o: ../../include/openssl/obj_mac.h ../../include/openssl/objects.h
-eng_table.o: ../../include/openssl/opensslconf.h
-eng_table.o: ../../include/openssl/opensslv.h ../../include/openssl/ossl_typ.h
-eng_table.o: ../../include/openssl/safestack.h ../../include/openssl/stack.h
-eng_table.o: ../../include/openssl/symhacks.h ../cryptlib.h eng_int.h
-eng_table.o: eng_table.c
-tb_cipher.o: ../../e_os.h ../../include/openssl/bio.h
-tb_cipher.o: ../../include/openssl/buffer.h ../../include/openssl/crypto.h
-tb_cipher.o: ../../include/openssl/e_os2.h ../../include/openssl/engine.h
-tb_cipher.o: ../../include/openssl/err.h ../../include/openssl/lhash.h
-tb_cipher.o: ../../include/openssl/opensslconf.h
-tb_cipher.o: ../../include/openssl/opensslv.h ../../include/openssl/ossl_typ.h
-tb_cipher.o: ../../include/openssl/safestack.h ../../include/openssl/stack.h
-tb_cipher.o: ../../include/openssl/symhacks.h ../cryptlib.h eng_int.h
-tb_cipher.o: tb_cipher.c
-tb_dh.o: ../../e_os.h ../../include/openssl/bio.h
-tb_dh.o: ../../include/openssl/buffer.h ../../include/openssl/crypto.h
-tb_dh.o: ../../include/openssl/e_os2.h ../../include/openssl/engine.h
-tb_dh.o: ../../include/openssl/err.h ../../include/openssl/lhash.h
-tb_dh.o: ../../include/openssl/opensslconf.h ../../include/openssl/opensslv.h
-tb_dh.o: ../../include/openssl/ossl_typ.h ../../include/openssl/safestack.h
-tb_dh.o: ../../include/openssl/stack.h ../../include/openssl/symhacks.h
-tb_dh.o: ../cryptlib.h eng_int.h tb_dh.c
-tb_digest.o: ../../e_os.h ../../include/openssl/bio.h
-tb_digest.o: ../../include/openssl/buffer.h ../../include/openssl/crypto.h
-tb_digest.o: ../../include/openssl/e_os2.h ../../include/openssl/engine.h
-tb_digest.o: ../../include/openssl/err.h ../../include/openssl/lhash.h
-tb_digest.o: ../../include/openssl/opensslconf.h
-tb_digest.o: ../../include/openssl/opensslv.h ../../include/openssl/ossl_typ.h
-tb_digest.o: ../../include/openssl/safestack.h ../../include/openssl/stack.h
-tb_digest.o: ../../include/openssl/symhacks.h ../cryptlib.h eng_int.h
-tb_digest.o: tb_digest.c
-tb_dsa.o: ../../e_os.h ../../include/openssl/bio.h
-tb_dsa.o: ../../include/openssl/buffer.h ../../include/openssl/crypto.h
-tb_dsa.o: ../../include/openssl/e_os2.h ../../include/openssl/engine.h
-tb_dsa.o: ../../include/openssl/err.h ../../include/openssl/lhash.h
-tb_dsa.o: ../../include/openssl/opensslconf.h ../../include/openssl/opensslv.h
-tb_dsa.o: ../../include/openssl/ossl_typ.h ../../include/openssl/safestack.h
-tb_dsa.o: ../../include/openssl/stack.h ../../include/openssl/symhacks.h
-tb_dsa.o: ../cryptlib.h eng_int.h tb_dsa.c
-tb_ecdh.o: ../../e_os.h ../../include/openssl/bio.h
-tb_ecdh.o: ../../include/openssl/buffer.h ../../include/openssl/crypto.h
-tb_ecdh.o: ../../include/openssl/e_os2.h ../../include/openssl/engine.h
-tb_ecdh.o: ../../include/openssl/err.h ../../include/openssl/lhash.h
-tb_ecdh.o: ../../include/openssl/opensslconf.h ../../include/openssl/opensslv.h
-tb_ecdh.o: ../../include/openssl/ossl_typ.h ../../include/openssl/safestack.h
-tb_ecdh.o: ../../include/openssl/stack.h ../../include/openssl/symhacks.h
-tb_ecdh.o: ../cryptlib.h eng_int.h tb_ecdh.c
-tb_ecdsa.o: ../../e_os.h ../../include/openssl/bio.h
-tb_ecdsa.o: ../../include/openssl/buffer.h ../../include/openssl/crypto.h
-tb_ecdsa.o: ../../include/openssl/e_os2.h ../../include/openssl/engine.h
-tb_ecdsa.o: ../../include/openssl/err.h ../../include/openssl/lhash.h
-tb_ecdsa.o: ../../include/openssl/opensslconf.h
-tb_ecdsa.o: ../../include/openssl/opensslv.h ../../include/openssl/ossl_typ.h
-tb_ecdsa.o: ../../include/openssl/safestack.h ../../include/openssl/stack.h
-tb_ecdsa.o: ../../include/openssl/symhacks.h ../cryptlib.h eng_int.h tb_ecdsa.c
-tb_rand.o: ../../e_os.h ../../include/openssl/bio.h
-tb_rand.o: ../../include/openssl/buffer.h ../../include/openssl/crypto.h
-tb_rand.o: ../../include/openssl/e_os2.h ../../include/openssl/engine.h
-tb_rand.o: ../../include/openssl/err.h ../../include/openssl/lhash.h
-tb_rand.o: ../../include/openssl/opensslconf.h ../../include/openssl/opensslv.h
-tb_rand.o: ../../include/openssl/ossl_typ.h ../../include/openssl/safestack.h
-tb_rand.o: ../../include/openssl/stack.h ../../include/openssl/symhacks.h
-tb_rand.o: ../cryptlib.h eng_int.h tb_rand.c
-tb_rsa.o: ../../e_os.h ../../include/openssl/bio.h
-tb_rsa.o: ../../include/openssl/buffer.h ../../include/openssl/crypto.h
-tb_rsa.o: ../../include/openssl/e_os2.h ../../include/openssl/engine.h
-tb_rsa.o: ../../include/openssl/err.h ../../include/openssl/lhash.h
-tb_rsa.o: ../../include/openssl/opensslconf.h ../../include/openssl/opensslv.h
-tb_rsa.o: ../../include/openssl/ossl_typ.h ../../include/openssl/safestack.h
-tb_rsa.o: ../../include/openssl/stack.h ../../include/openssl/symhacks.h
-tb_rsa.o: ../cryptlib.h eng_int.h tb_rsa.c
-tb_store.o: ../../e_os.h ../../include/openssl/bio.h
-tb_store.o: ../../include/openssl/buffer.h ../../include/openssl/crypto.h
-tb_store.o: ../../include/openssl/e_os2.h ../../include/openssl/engine.h
-tb_store.o: ../../include/openssl/err.h ../../include/openssl/lhash.h
-tb_store.o: ../../include/openssl/opensslconf.h
-tb_store.o: ../../include/openssl/opensslv.h ../../include/openssl/ossl_typ.h
-tb_store.o: ../../include/openssl/safestack.h ../../include/openssl/stack.h
-tb_store.o: ../../include/openssl/symhacks.h ../cryptlib.h eng_int.h tb_store.c
diff --git a/crypto/openssl/crypto/engine/README b/crypto/openssl/crypto/engine/README
deleted file mode 100644
index 6b69b70f576a..000000000000
--- a/crypto/openssl/crypto/engine/README
+++ /dev/null
@@ -1,211 +0,0 @@
-Notes: 2001-09-24
------------------
-
-This "description" (if one chooses to call it that) needed some major updating
-so here goes. This update addresses a change being made at the same time to
-OpenSSL, and it pretty much completely restructures the underlying mechanics of
-the "ENGINE" code. So it serves a double purpose of being a "ENGINE internals
-for masochists" document *and* a rather extensive commit log message. (I'd get
-lynched for sticking all this in CHANGES or the commit mails :-).
-
-ENGINE_TABLE underlies this restructuring, as described in the internal header
-"eng_int.h", implemented in eng_table.c, and used in each of the "class" files;
-tb_rsa.c, tb_dsa.c, etc.
-
-However, "EVP_CIPHER" underlies the motivation and design of ENGINE_TABLE so
-I'll mention a bit about that first. EVP_CIPHER (and most of this applies
-equally to EVP_MD for digests) is both a "method" and a algorithm/mode
-identifier that, in the current API, "lingers". These cipher description +
-implementation structures can be defined or obtained directly by applications,
-or can be loaded "en masse" into EVP storage so that they can be catalogued and
-searched in various ways, ie. two ways of encrypting with the "des_cbc"
-algorithm/mode pair are;
-
-(i) directly;
-     const EVP_CIPHER *cipher = EVP_des_cbc();
-     EVP_EncryptInit(&ctx, cipher, key, iv);
-     [ ... use EVP_EncryptUpdate() and EVP_EncryptFinal() ...]
-
-(ii) indirectly; 
-     OpenSSL_add_all_ciphers();
-     cipher = EVP_get_cipherbyname("des_cbc");
-     EVP_EncryptInit(&ctx, cipher, key, iv);
-     [ ... etc ... ]
-
-The latter is more generally used because it also allows ciphers/digests to be
-looked up based on other identifiers which can be useful for automatic cipher
-selection, eg. in SSL/TLS, or by user-controllable configuration.
-
-The important point about this is that EVP_CIPHER definitions and structures are
-passed around with impunity and there is no safe way, without requiring massive
-rewrites of many applications, to assume that EVP_CIPHERs can be reference
-counted. One an EVP_CIPHER is exposed to the caller, neither it nor anything it
-comes from can "safely" be destroyed. Unless of course the way of getting to
-such ciphers is via entirely distinct API calls that didn't exist before.
-However existing API usage cannot be made to understand when an EVP_CIPHER
-pointer, that has been passed to the caller, is no longer being used.
-
-The other problem with the existing API w.r.t. to hooking EVP_CIPHER support
-into ENGINE is storage - the OBJ_NAME-based storage used by EVP to register
-ciphers simultaneously registers cipher *types* and cipher *implementations* -
-they are effectively the same thing, an "EVP_CIPHER" pointer. The problem with
-hooking in ENGINEs is that multiple ENGINEs may implement the same ciphers. The
-solution is necessarily that ENGINE-provided ciphers simply are not registered,
-stored, or exposed to the caller in the same manner as existing ciphers. This is
-especially necessary considering the fact ENGINE uses reference counts to allow
-for cleanup, modularity, and DSO support - yet EVP_CIPHERs, as exposed to
-callers in the current API, support no such controls.
-
-Another sticking point for integrating cipher support into ENGINE is linkage.
-Already there is a problem with the way ENGINE supports RSA, DSA, etc whereby
-they are available *because* they're part of a giant ENGINE called "openssl".
-Ie. all implementations *have* to come from an ENGINE, but we get round that by
-having a giant ENGINE with all the software support encapsulated. This creates
-linker hassles if nothing else - linking a 1-line application that calls 2 basic
-RSA functions (eg. "RSA_free(RSA_new());") will result in large quantities of
-ENGINE code being linked in *and* because of that DSA, DH, and RAND also. If we
-continue with this approach for EVP_CIPHER support (even if it *was* possible)
-we would lose our ability to link selectively by selectively loading certain
-implementations of certain functionality. Touching any part of any kind of
-crypto would result in massive static linkage of everything else. So the
-solution is to change the way ENGINE feeds existing "classes", ie. how the
-hooking to ENGINE works from RSA, DSA, DH, RAND, as well as adding new hooking
-for EVP_CIPHER, and EVP_MD.
-
-The way this is now being done is by mostly reverting back to how things used to
-work prior to ENGINE :-). Ie. RSA now has a "RSA_METHOD" pointer again - this
-was previously replaced by an "ENGINE" pointer and all RSA code that required
-the RSA_METHOD would call ENGINE_get_RSA() each time on its ENGINE handle to
-temporarily get and use the ENGINE's RSA implementation. Apart from being more
-efficient, switching back to each RSA having an RSA_METHOD pointer also allows
-us to conceivably operate with *no* ENGINE. As we'll see, this removes any need
-for a fallback ENGINE that encapsulates default implementations - we can simply
-have our RSA structure pointing its RSA_METHOD pointer to the software
-implementation and have its ENGINE pointer set to NULL.
-
-A look at the EVP_CIPHER hooking is most explanatory, the RSA, DSA (etc) cases
-turn out to be degenerate forms of the same thing. The EVP storage of ciphers,
-and the existing EVP API functions that return "software" implementations and
-descriptions remain untouched. However, the storage takes more meaning in terms
-of "cipher description" and less meaning in terms of "implementation". When an
-EVP_CIPHER_CTX is actually initialised with an EVP_CIPHER method and is about to
-begin en/decryption, the hooking to ENGINE comes into play. What happens is that
-cipher-specific ENGINE code is asked for an ENGINE pointer (a functional
-reference) for any ENGINE that is registered to perform the algo/mode that the
-provided EVP_CIPHER structure represents. Under normal circumstances, that
-ENGINE code will return NULL because no ENGINEs will have had any cipher
-implementations *registered*. As such, a NULL ENGINE pointer is stored in the
-EVP_CIPHER_CTX context, and the EVP_CIPHER structure is left hooked into the
-context and so is used as the implementation. Pretty much how things work now
-except we'd have a redundant ENGINE pointer set to NULL and doing nothing.
-
-Conversely, if an ENGINE *has* been registered to perform the algorithm/mode
-combination represented by the provided EVP_CIPHER, then a functional reference
-to that ENGINE will be returned to the EVP_CIPHER_CTX during initialisation.
-That functional reference will be stored in the context (and released on
-cleanup) - and having that reference provides a *safe* way to use an EVP_CIPHER
-definition that is private to the ENGINE. Ie. the EVP_CIPHER provided by the
-application will actually be replaced by an EVP_CIPHER from the registered
-ENGINE - it will support the same algorithm/mode as the original but will be a
-completely different implementation. Because this EVP_CIPHER isn't stored in the
-EVP storage, nor is it returned to applications from traditional API functions,
-there is no associated problem with it not having reference counts. And of
-course, when one of these "private" cipher implementations is hooked into
-EVP_CIPHER_CTX, it is done whilst the EVP_CIPHER_CTX holds a functional
-reference to the ENGINE that owns it, thus the use of the ENGINE's EVP_CIPHER is
-safe.
-
-The "cipher-specific ENGINE code" I mentioned is implemented in tb_cipher.c but
-in essence it is simply an instantiation of "ENGINE_TABLE" code for use by
-EVP_CIPHER code. tb_digest.c is virtually identical but, of course, it is for
-use by EVP_MD code. Ditto for tb_rsa.c, tb_dsa.c, etc. These instantiations of
-ENGINE_TABLE essentially provide linker-separation of the classes so that even
-if ENGINEs implement *all* possible algorithms, an application using only
-EVP_CIPHER code will link at most code relating to EVP_CIPHER, tb_cipher.c, core
-ENGINE code that is independant of class, and of course the ENGINE
-implementation that the application loaded. It will *not* however link any
-class-specific ENGINE code for digests, RSA, etc nor will it bleed over into
-other APIs, such as the RSA/DSA/etc library code.
-
-ENGINE_TABLE is a little more complicated than may seem necessary but this is
-mostly to avoid a lot of "init()"-thrashing on ENGINEs (that may have to load
-DSOs, and other expensive setup that shouldn't be thrashed unnecessarily) *and*
-to duplicate "default" behaviour. Basically an ENGINE_TABLE instantiation, for
-example tb_cipher.c, implements a hash-table keyed by integer "nid" values.
-These nids provide the uniquenness of an algorithm/mode - and each nid will hash
-to a potentially NULL "ENGINE_PILE". An ENGINE_PILE is essentially a list of
-pointers to ENGINEs that implement that particular 'nid'. Each "pile" uses some
-caching tricks such that requests on that 'nid' will be cached and all future
-requests will return immediately (well, at least with minimal operation) unless
-a change is made to the pile, eg. perhaps an ENGINE was unloaded. The reason is
-that an application could have support for 10 ENGINEs statically linked
-in, and the machine in question may not have any of the hardware those 10
-ENGINEs support. If each of those ENGINEs has a "des_cbc" implementation, we
-want to avoid every EVP_CIPHER_CTX setup from trying (and failing) to initialise
-each of those 10 ENGINEs. Instead, the first such request will try to do that
-and will either return (and cache) a NULL ENGINE pointer or will return a
-functional reference to the first that successfully initialised. In the latter
-case it will also cache an extra functional reference to the ENGINE as a
-"default" for that 'nid'. The caching is acknowledged by a 'uptodate' variable
-that is unset only if un/registration takes place on that pile. Ie. if
-implementations of "des_cbc" are added or removed. This behaviour can be
-tweaked; the ENGINE_TABLE_FLAG_NOINIT value can be passed to
-ENGINE_set_table_flags(), in which case the only ENGINEs that tb_cipher.c will
-try to initialise from the "pile" will be those that are already initialised
-(ie. it's simply an increment of the functional reference count, and no real
-"initialisation" will take place).
-
-RSA, DSA, DH, and RAND all have their own ENGINE_TABLE code as well, and the
-difference is that they all use an implicit 'nid' of 1. Whereas EVP_CIPHERs are
-actually qualitatively different depending on 'nid' (the "des_cbc" EVP_CIPHER is
-not an interoperable implementation of "aes_256_cbc"), RSA_METHODs are
-necessarily interoperable and don't have different flavours, only different
-implementations. In other words, the ENGINE_TABLE for RSA will either be empty,
-or will have a single ENGING_PILE hashed to by the 'nid' 1 and that pile
-represents ENGINEs that implement the single "type" of RSA there is.
-
-Cleanup - the registration and unregistration may pose questions about how
-cleanup works with the ENGINE_PILE doing all this caching nonsense (ie. when the
-application or EVP_CIPHER code releases its last reference to an ENGINE, the
-ENGINE_PILE code may still have references and thus those ENGINEs will stay
-hooked in forever). The way this is handled is via "unregistration". With these
-new ENGINE changes, an abstract ENGINE can be loaded and initialised, but that
-is an algorithm-agnostic process. Even if initialised, it will not have
-registered any of its implementations (to do so would link all class "table"
-code despite the fact the application may use only ciphers, for example). This
-is deliberately a distinct step. Moreover, registration and unregistration has
-nothing to do with whether an ENGINE is *functional* or not (ie. you can even
-register an ENGINE and its implementations without it being operational, you may
-not even have the drivers to make it operate). What actually happens with
-respect to cleanup is managed inside eng_lib.c with the "engine_cleanup_***"
-functions. These functions are internal-only and each part of ENGINE code that
-could require cleanup will, upon performing its first allocation, register a
-callback with the "engine_cleanup" code. The other part of this that makes it
-tick is that the ENGINE_TABLE instantiations (tb_***.c) use NULL as their
-initialised state. So if RSA code asks for an ENGINE and no ENGINE has
-registered an implementation, the code will simply return NULL and the tb_rsa.c
-state will be unchanged. Thus, no cleanup is required unless registration takes
-place. ENGINE_cleanup() will simply iterate across a list of registered cleanup
-callbacks calling each in turn, and will then internally delete its own storage
-(a STACK). When a cleanup callback is next registered (eg. if the cleanup() is
-part of a gracefull restart and the application wants to cleanup all state then
-start again), the internal STACK storage will be freshly allocated. This is much
-the same as the situation in the ENGINE_TABLE instantiations ... NULL is the
-initialised state, so only modification operations (not queries) will cause that
-code to have to register a cleanup.
-
-What else? The bignum callbacks and associated ENGINE functions have been
-removed for two obvious reasons; (i) there was no way to generalise them to the
-mechanism now used by RSA/DSA/..., because there's no such thing as a BIGNUM
-method, and (ii) because of (i), there was no meaningful way for library or
-application code to automatically hook and use ENGINE supplied bignum functions
-anyway. Also, ENGINE_cpy() has been removed (although an internal-only version
-exists) - the idea of providing an ENGINE_cpy() function probably wasn't a good
-one and now certainly doesn't make sense in any generalised way. Some of the
-RSA, DSA, DH, and RAND functions that were fiddled during the original ENGINE
-changes have now, as a consequence, been reverted back. This is because the
-hooking of ENGINE is now automatic (and passive, it can interally use a NULL
-ENGINE pointer to simply ignore ENGINE from then on).
-
-Hell, that should be enough for now ... comments welcome: geoff@openssl.org
-
diff --git a/crypto/openssl/crypto/engine/eng_all.c b/crypto/openssl/crypto/engine/eng_all.c
deleted file mode 100644
index 8599046717a5..000000000000
--- a/crypto/openssl/crypto/engine/eng_all.c
+++ /dev/null
@@ -1,122 +0,0 @@
-/* crypto/engine/eng_all.c -*- mode: C; c-file-style: "eay" -*- */
-/* Written by Richard Levitte <richard@levitte.org> for the OpenSSL
- * project 2000.
- */
-/* ====================================================================
- * Copyright (c) 2000-2001 The OpenSSL Project.  All rights reserved.
- *
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions
- * are met:
- *
- * 1. Redistributions of source code must retain the above copyright
- *    notice, this list of conditions and the following disclaimer. 
- *
- * 2. Redistributions in binary form must reproduce the above copyright
- *    notice, this list of conditions and the following disclaimer in
- *    the documentation and/or other materials provided with the
- *    distribution.
- *
- * 3. All advertising materials mentioning features or use of this
- *    software must display the following acknowledgment:
- *    "This product includes software developed by the OpenSSL Project
- *    for use in the OpenSSL Toolkit. (http://www.OpenSSL.org/)"
- *
- * 4. The names "OpenSSL Toolkit" and "OpenSSL Project" must not be used to
- *    endorse or promote products derived from this software without
- *    prior written permission. For written permission, please contact
- *    licensing@OpenSSL.org.
- *
- * 5. Products derived from this software may not be called "OpenSSL"
- *    nor may "OpenSSL" appear in their names without prior written
- *    permission of the OpenSSL Project.
- *
- * 6. Redistributions of any form whatsoever must retain the following
- *    acknowledgment:
- *    "This product includes software developed by the OpenSSL Project
- *    for use in the OpenSSL Toolkit (http://www.OpenSSL.org/)"
- *
- * THIS SOFTWARE IS PROVIDED BY THE OpenSSL PROJECT ``AS IS'' AND ANY
- * EXPRESSED OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
- * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR
- * PURPOSE ARE DISCLAIMED.  IN NO EVENT SHALL THE OpenSSL PROJECT OR
- * ITS CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
- * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
- * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
- * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
- * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
- * STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
- * ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED
- * OF THE POSSIBILITY OF SUCH DAMAGE.
- * ====================================================================
- *
- * This product includes cryptographic software written by Eric Young
- * (eay@cryptsoft.com).  This product includes software written by Tim
- * Hudson (tjh@cryptsoft.com).
- *
- */
-
-#include "cryptlib.h"
-#include "eng_int.h"
-
-void ENGINE_load_builtin_engines(void)
-	{
-	/* There's no longer any need for an "openssl" ENGINE unless, one day,
-	 * it is the *only* way for standard builtin implementations to be be
-	 * accessed (ie. it would be possible to statically link binaries with
-	 * *no* builtin implementations). */
-#if 0
-	ENGINE_load_openssl();
-#endif
-#if !defined(OPENSSL_NO_HW) && !defined(OPENSSL_NO_HW_PADLOCK)
-	ENGINE_load_padlock();
-#endif
-	ENGINE_load_dynamic();
-#ifndef OPENSSL_NO_STATIC_ENGINE
-#ifndef OPENSSL_NO_HW
-#ifndef OPENSSL_NO_HW_4758_CCA
-	ENGINE_load_4758cca();
-#endif
-#ifndef OPENSSL_NO_HW_AEP
-	ENGINE_load_aep();
-#endif
-#ifndef OPENSSL_NO_HW_ATALLA
-	ENGINE_load_atalla();
-#endif
-#ifndef OPENSSL_NO_HW_CSWIFT
-	ENGINE_load_cswift();
-#endif
-#ifndef OPENSSL_NO_HW_NCIPHER
-	ENGINE_load_chil();
-#endif
-#ifndef OPENSSL_NO_HW_NURON
-	ENGINE_load_nuron();
-#endif
-#ifndef OPENSSL_NO_HW_SUREWARE
-	ENGINE_load_sureware();
-#endif
-#ifndef OPENSSL_NO_HW_UBSEC
-	ENGINE_load_ubsec();
-#endif
-#endif
-#if !defined(OPENSSL_NO_GMP) && !defined(OPENSSL_NO_HW_GMP)
-	ENGINE_load_gmp();
-#endif
-#endif
-#ifndef OPENSSL_NO_HW
-#if defined(__OpenBSD__) || defined(__FreeBSD__)
-	ENGINE_load_cryptodev();
-#endif
-#endif
-	}
-
-#if defined(__OpenBSD__) || defined(__FreeBSD__)
-void ENGINE_setup_bsd_cryptodev(void) {
-	static int bsd_cryptodev_default_loaded = 0;
-	if (!bsd_cryptodev_default_loaded) {
-		ENGINE_load_cryptodev();
-		ENGINE_register_all_complete();
-	}
-	bsd_cryptodev_default_loaded=1;
-}
-#endif
diff --git a/crypto/openssl/crypto/engine/eng_cnf.c b/crypto/openssl/crypto/engine/eng_cnf.c
deleted file mode 100644
index a97e01e619ff..000000000000
--- a/crypto/openssl/crypto/engine/eng_cnf.c
+++ /dev/null
@@ -1,239 +0,0 @@
-/* eng_cnf.c */
-/* Written by Stephen Henson (shenson@bigfoot.com) for the OpenSSL
- * project 2001.
- */
-/* ====================================================================
- * Copyright (c) 2001 The OpenSSL Project.  All rights reserved.
- *
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions
- * are met:
- *
- * 1. Redistributions of source code must retain the above copyright
- *    notice, this list of conditions and the following disclaimer. 
- *
- * 2. Redistributions in binary form must reproduce the above copyright
- *    notice, this list of conditions and the following disclaimer in
- *    the documentation and/or other materials provided with the
- *    distribution.
- *
- * 3. All advertising materials mentioning features or use of this
- *    software must display the following acknowledgment:
- *    "This product includes software developed by the OpenSSL Project
- *    for use in the OpenSSL Toolkit. (http://www.OpenSSL.org/)"
- *
- * 4. The names "OpenSSL Toolkit" and "OpenSSL Project" must not be used to
- *    endorse or promote products derived from this software without
- *    prior written permission. For written permission, please contact
- *    licensing@OpenSSL.org.
- *
- * 5. Products derived from this software may not be called "OpenSSL"
- *    nor may "OpenSSL" appear in their names without prior written
- *    permission of the OpenSSL Project.
- *
- * 6. Redistributions of any form whatsoever must retain the following
- *    acknowledgment:
- *    "This product includes software developed by the OpenSSL Project
- *    for use in the OpenSSL Toolkit (http://www.OpenSSL.org/)"
- *
- * THIS SOFTWARE IS PROVIDED BY THE OpenSSL PROJECT ``AS IS'' AND ANY
- * EXPRESSED OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
- * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR
- * PURPOSE ARE DISCLAIMED.  IN NO EVENT SHALL THE OpenSSL PROJECT OR
- * ITS CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
- * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
- * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
- * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
- * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
- * STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
- * ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED
- * OF THE POSSIBILITY OF SUCH DAMAGE.
- * ====================================================================
- *
- * This product includes cryptographic software written by Eric Young
- * (eay@cryptsoft.com).  This product includes software written by Tim
- * Hudson (tjh@cryptsoft.com).
- *
- */
-
-#include "eng_int.h"
-#include <openssl/conf.h>
-
-/* #define ENGINE_CONF_DEBUG */
-
-/* ENGINE config module */
-
-static char *skip_dot(char *name)
-	{
-	char *p;
-	p = strchr(name, '.');
-	if (p)
-		return p + 1;
-	return name;
-	}
-
-static STACK_OF(ENGINE) *initialized_engines = NULL;
-
-static int int_engine_init(ENGINE *e)
-	{
-	if (!ENGINE_init(e))
-		return 0;
-	if (!initialized_engines)
-		initialized_engines = sk_ENGINE_new_null();
-	if (!initialized_engines || !sk_ENGINE_push(initialized_engines, e))
-		{
-		ENGINE_finish(e);
-		return 0;
-		}
-	return 1;
-	}
-	
-
-static int int_engine_configure(char *name, char *value, const CONF *cnf)
-	{
-	int i;
-	int ret = 0;
-	long do_init = -1;
-	STACK_OF(CONF_VALUE) *ecmds;
-	CONF_VALUE *ecmd;
-	char *ctrlname, *ctrlvalue;
-	ENGINE *e = NULL;
-	name = skip_dot(name);
-#ifdef ENGINE_CONF_DEBUG
-	fprintf(stderr, "Configuring engine %s\n", name);
-#endif
-	/* Value is a section containing ENGINE commands */
-	ecmds = NCONF_get_section(cnf, value);
-
-	if (!ecmds)
-		{
-		ENGINEerr(ENGINE_F_INT_ENGINE_CONFIGURE, ENGINE_R_ENGINE_SECTION_ERROR);
-		return 0;
-		}
-
-	for (i = 0; i < sk_CONF_VALUE_num(ecmds); i++)
-		{
-		ecmd = sk_CONF_VALUE_value(ecmds, i);
-		ctrlname = skip_dot(ecmd->name);
-		ctrlvalue = ecmd->value;
-#ifdef ENGINE_CONF_DEBUG
-	fprintf(stderr, "ENGINE conf: doing ctrl(%s,%s)\n", ctrlname, ctrlvalue);
-#endif
-
-		/* First handle some special pseudo ctrls */
-
-		/* Override engine name to use */
-		if (!strcmp(ctrlname, "engine_id"))
-			name = ctrlvalue;
-		/* Load a dynamic ENGINE */
-		else if (!strcmp(ctrlname, "dynamic_path"))
-			{
-			e = ENGINE_by_id("dynamic");
-			if (!e)
-				goto err;
-			if (!ENGINE_ctrl_cmd_string(e, "SO_PATH", ctrlvalue, 0))
-				goto err;
-			if (!ENGINE_ctrl_cmd_string(e, "LIST_ADD", "2", 0))
-				goto err;
-			if (!ENGINE_ctrl_cmd_string(e, "LOAD", NULL, 0))
-				goto err;
-			}
-		/* ... add other pseudos here ... */
-		else
-			{
-			/* At this point we need an ENGINE structural reference
-			 * if we don't already have one.
-			 */
-			if (!e)
-				{
-				e = ENGINE_by_id(name);
-				if (!e)
-					return 0;
-				}
-			/* Allow "EMPTY" to mean no value: this allows a valid
-			 * "value" to be passed to ctrls of type NO_INPUT
-		 	 */
-			if (!strcmp(ctrlvalue, "EMPTY"))
-				ctrlvalue = NULL;
-			if (!strcmp(ctrlname, "init"))
-				{
-				if (!NCONF_get_number_e(cnf, value, "init", &do_init))
-					goto err;
-				if (do_init == 1)
-					{
-					if (!int_engine_init(e))
-						goto err;
-					}
-				else if (do_init != 0)
-					{
-					ENGINEerr(ENGINE_F_INT_ENGINE_CONFIGURE, ENGINE_R_INVALID_INIT_VALUE);
-					goto err;
-					}
-				}
-			else if (!strcmp(ctrlname, "default_algorithms"))
-				{
-				if (!ENGINE_set_default_string(e, ctrlvalue))
-					goto err;
-				}
-			else if (!ENGINE_ctrl_cmd_string(e,
-					ctrlname, ctrlvalue, 0))
-				return 0;
-			}
-
-
-
-		}
-	if (e && (do_init == -1) && !int_engine_init(e))
-		goto err;
-	ret = 1;
-	err:
-	if (e)
-		ENGINE_free(e);
-	return ret;
-	}
-
-
-static int int_engine_module_init(CONF_IMODULE *md, const CONF *cnf)
-	{
-	STACK_OF(CONF_VALUE) *elist;
-	CONF_VALUE *cval;
-	int i;
-#ifdef ENGINE_CONF_DEBUG
-	fprintf(stderr, "Called engine module: name %s, value %s\n",
-			CONF_imodule_get_name(md), CONF_imodule_get_value(md));
-#endif
-	/* Value is a section containing ENGINEs to configure */
-	elist = NCONF_get_section(cnf, CONF_imodule_get_value(md));
-
-	if (!elist)
-		{
-		ENGINEerr(ENGINE_F_INT_ENGINE_MODULE_INIT, ENGINE_R_ENGINES_SECTION_ERROR);
-		return 0;
-		}
-
-	for (i = 0; i < sk_CONF_VALUE_num(elist); i++)
-		{
-		cval = sk_CONF_VALUE_value(elist, i);
-		if (!int_engine_configure(cval->name, cval->value, cnf))
-			return 0;
-		}
-
-	return 1;
-	}
-
-static void int_engine_module_finish(CONF_IMODULE *md)
-	{
-	ENGINE *e;
-	while ((e = sk_ENGINE_pop(initialized_engines)))
-		ENGINE_finish(e);
-	sk_ENGINE_free(initialized_engines);
-	initialized_engines = NULL;
-	}
-	
-
-void ENGINE_add_conf_module(void)
-	{
-	CONF_module_add("engines",
-			int_engine_module_init,
-			int_engine_module_finish);
-	}
diff --git a/crypto/openssl/crypto/engine/eng_cryptodev.c b/crypto/openssl/crypto/engine/eng_cryptodev.c
deleted file mode 100644
index ab38cd52f097..000000000000
--- a/crypto/openssl/crypto/engine/eng_cryptodev.c
+++ /dev/null
@@ -1,1133 +0,0 @@
-/*
- * Copyright (c) 2002 Bob Beck <beck@openbsd.org>
- * Copyright (c) 2002 Theo de Raadt
- * Copyright (c) 2002 Markus Friedl
- * All rights reserved.
- *
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions
- * are met:
- * 1. Redistributions of source code must retain the above copyright
- *    notice, this list of conditions and the following disclaimer.
- * 2. Redistributions in binary form must reproduce the above copyright
- *    notice, this list of conditions and the following disclaimer in the
- *    documentation and/or other materials provided with the distribution.
- *
- * THIS SOFTWARE IS PROVIDED BY THE AUTHOR AND CONTRIBUTORS ``AS IS'' AND ANY
- * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
- * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
- * DISCLAIMED.  IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE FOR ANY
- * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
- * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
- * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
- * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
- * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
- * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
- *
- */
-
-#include <openssl/objects.h>
-#include <openssl/engine.h>
-#include <openssl/evp.h>
-#include <openssl/bn.h>
-
-#if (defined(__unix__) || defined(unix)) && !defined(USG) && \
-	(defined(OpenBSD) || defined(__FreeBSD_version))
-#include <sys/param.h>
-# if (OpenBSD >= 200112) || ((__FreeBSD_version >= 470101 && __FreeBSD_version < 500000) || __FreeBSD_version >= 500041)
-#  define HAVE_CRYPTODEV
-# endif
-# if (OpenBSD >= 200110)
-#  define HAVE_SYSLOG_R
-# endif
-#endif
-
-#ifndef HAVE_CRYPTODEV
-
-void
-ENGINE_load_cryptodev(void)
-{
-	/* This is a NOP on platforms without /dev/crypto */
-	return;
-}
-
-#else 
- 
-#include <sys/types.h>
-#include <crypto/cryptodev.h>
-#include <sys/ioctl.h>
-#include <errno.h>
-#include <stdio.h>
-#include <unistd.h>
-#include <fcntl.h>
-#include <stdarg.h>
-#include <syslog.h>
-#include <errno.h>
-#include <string.h>
-
-struct dev_crypto_state {
-	struct session_op d_sess;
-	int d_fd;
-};
-
-static u_int32_t cryptodev_asymfeat = 0;
-
-static int get_asym_dev_crypto(void);
-static int open_dev_crypto(void);
-static int get_dev_crypto(void);
-static int cryptodev_max_iv(int cipher);
-static int cryptodev_key_length_valid(int cipher, int len);
-static int cipher_nid_to_cryptodev(int nid);
-static int get_cryptodev_ciphers(const int **cnids);
-static int get_cryptodev_digests(const int **cnids);
-static int cryptodev_usable_ciphers(const int **nids);
-static int cryptodev_usable_digests(const int **nids);
-static int cryptodev_cipher(EVP_CIPHER_CTX *ctx, unsigned char *out,
-    const unsigned char *in, unsigned int inl);
-static int cryptodev_init_key(EVP_CIPHER_CTX *ctx, const unsigned char *key,
-    const unsigned char *iv, int enc);
-static int cryptodev_cleanup(EVP_CIPHER_CTX *ctx);
-static int cryptodev_engine_ciphers(ENGINE *e, const EVP_CIPHER **cipher,
-    const int **nids, int nid);
-static int cryptodev_engine_digests(ENGINE *e, const EVP_MD **digest,
-    const int **nids, int nid);
-static int bn2crparam(const BIGNUM *a, struct crparam *crp);
-static int crparam2bn(struct crparam *crp, BIGNUM *a);
-static void zapparams(struct crypt_kop *kop);
-static int cryptodev_asym(struct crypt_kop *kop, int rlen, BIGNUM *r,
-    int slen, BIGNUM *s);
-
-static int cryptodev_bn_mod_exp(BIGNUM *r, const BIGNUM *a,
-    const BIGNUM *p, const BIGNUM *m, BN_CTX *ctx, BN_MONT_CTX *m_ctx);
-static int cryptodev_rsa_nocrt_mod_exp(BIGNUM *r0, const BIGNUM *I,
-    RSA *rsa);
-static int cryptodev_rsa_mod_exp(BIGNUM *r0, const BIGNUM *I, RSA *rsa, BN_CTX *ctx);
-static int cryptodev_dsa_bn_mod_exp(DSA *dsa, BIGNUM *r, BIGNUM *a,
-    const BIGNUM *p, const BIGNUM *m, BN_CTX *ctx, BN_MONT_CTX *m_ctx);
-static int cryptodev_dsa_dsa_mod_exp(DSA *dsa, BIGNUM *t1, BIGNUM *g,
-    BIGNUM *u1, BIGNUM *pub_key, BIGNUM *u2, BIGNUM *p,
-    BN_CTX *ctx, BN_MONT_CTX *mont);
-static DSA_SIG *cryptodev_dsa_do_sign(const unsigned char *dgst,
-    int dlen, DSA *dsa);
-static int cryptodev_dsa_verify(const unsigned char *dgst, int dgst_len,
-    DSA_SIG *sig, DSA *dsa);
-static int cryptodev_mod_exp_dh(const DH *dh, BIGNUM *r, const BIGNUM *a,
-    const BIGNUM *p, const BIGNUM *m, BN_CTX *ctx,
-    BN_MONT_CTX *m_ctx);
-static int cryptodev_dh_compute_key(unsigned char *key,
-    const BIGNUM *pub_key, DH *dh);
-static int cryptodev_ctrl(ENGINE *e, int cmd, long i, void *p,
-    void (*f)());
-void ENGINE_load_cryptodev(void);
-
-static const ENGINE_CMD_DEFN cryptodev_defns[] = {
-	{ 0, NULL, NULL, 0 }
-};
-
-static struct {
-	int	id;
-	int	nid;
-	int	ivmax;
-	int	keylen;
-} ciphers[] = {
-	{ CRYPTO_DES_CBC,		NID_des_cbc,		8,	 8, },
-	{ CRYPTO_3DES_CBC,		NID_des_ede3_cbc,	8,	24, },
-	{ CRYPTO_AES_CBC,		NID_aes_128_cbc,	16,	16, },
-	{ CRYPTO_BLF_CBC,		NID_bf_cbc,		8,	16, },
-	{ CRYPTO_CAST_CBC,		NID_cast5_cbc,		8,	16, },
-	{ CRYPTO_SKIPJACK_CBC,		NID_undef,		0,	 0, },
-	{ 0,				NID_undef,		0,	 0, },
-};
-
-static struct {
-	int	id;
-	int	nid;
-} digests[] = {
-	{ CRYPTO_SHA1_HMAC,		NID_hmacWithSHA1,	},
-	{ CRYPTO_RIPEMD160_HMAC,	NID_ripemd160,		},
-	{ CRYPTO_MD5_KPDK,		NID_undef,		},
-	{ CRYPTO_SHA1_KPDK,		NID_undef,		},
-	{ CRYPTO_MD5,			NID_md5,		},
-	{ CRYPTO_SHA1,			NID_undef,		},
-	{ 0,				NID_undef,		},
-};
-
-/*
- * Return a fd if /dev/crypto seems usable, 0 otherwise.
- */
-static int
-open_dev_crypto(void)
-{
-	static int fd = -1;
-
-	if (fd == -1) {
-		if ((fd = open("/dev/crypto", O_RDWR, 0)) == -1)
-			return (-1);
-		/* close on exec */
-		if (fcntl(fd, F_SETFD, 1) == -1) {
-			close(fd);
-			fd = -1;
-			return (-1);
-		}
-	}
-	return (fd);
-}
-
-static int
-get_dev_crypto(void)
-{
-	int fd, retfd;
-
-	if ((fd = open_dev_crypto()) == -1)
-		return (-1);
-	if (ioctl(fd, CRIOGET, &retfd) == -1)
-		return (-1);
-
-	/* close on exec */
-	if (fcntl(retfd, F_SETFD, 1) == -1) {
-		close(retfd);
-		return (-1);
-	}
-	return (retfd);
-}
-
-/* Caching version for asym operations */
-static int
-get_asym_dev_crypto(void)
-{
-	static int fd = -1;
-
-	if (fd == -1)
-		fd = get_dev_crypto();
-	return fd;
-}
-
-/*
- * XXXX this needs to be set for each alg - and determined from
- * a running card.
- */
-static int
-cryptodev_max_iv(int cipher)
-{
-	int i;
-
-	for (i = 0; ciphers[i].id; i++)
-		if (ciphers[i].id == cipher)
-			return (ciphers[i].ivmax);
-	return (0);
-}
-
-/*
- * XXXX this needs to be set for each alg - and determined from
- * a running card. For now, fake it out - but most of these
- * for real devices should return 1 for the supported key
- * sizes the device can handle.
- */
-static int
-cryptodev_key_length_valid(int cipher, int len)
-{
-	int i;
-
-	for (i = 0; ciphers[i].id; i++)
-		if (ciphers[i].id == cipher)
-			return (ciphers[i].keylen == len);
-	return (0);
-}
-
-/* convert libcrypto nids to cryptodev */
-static int
-cipher_nid_to_cryptodev(int nid)
-{
-	int i;
-
-	for (i = 0; ciphers[i].id; i++)
-		if (ciphers[i].nid == nid)
-			return (ciphers[i].id);
-	return (0);
-}
-
-/*
- * Find out what ciphers /dev/crypto will let us have a session for.
- * XXX note, that some of these openssl doesn't deal with yet!
- * returning them here is harmless, as long as we return NULL
- * when asked for a handler in the cryptodev_engine_ciphers routine
- */
-static int
-get_cryptodev_ciphers(const int **cnids)
-{
-	static int nids[CRYPTO_ALGORITHM_MAX];
-	struct session_op sess;
-	int fd, i, count = 0;
-
-	if ((fd = get_dev_crypto()) < 0) {
-		*cnids = NULL;
-		return (0);
-	}
-	memset(&sess, 0, sizeof(sess));
-	sess.key = (caddr_t)"123456781234567812345678";
-
-	for (i = 0; ciphers[i].id && count < CRYPTO_ALGORITHM_MAX; i++) {
-		if (ciphers[i].nid == NID_undef)
-			continue;
-		sess.cipher = ciphers[i].id;
-		sess.keylen = ciphers[i].keylen;
-		sess.mac = 0;
-		if (ioctl(fd, CIOCGSESSION, &sess) != -1 &&
-		    ioctl(fd, CIOCFSESSION, &sess.ses) != -1)
-			nids[count++] = ciphers[i].nid;
-	}
-	close(fd);
-
-	if (count > 0)
-		*cnids = nids;
-	else
-		*cnids = NULL;
-	return (count);
-}
-
-/*
- * Find out what digests /dev/crypto will let us have a session for.
- * XXX note, that some of these openssl doesn't deal with yet!
- * returning them here is harmless, as long as we return NULL
- * when asked for a handler in the cryptodev_engine_digests routine
- */
-static int
-get_cryptodev_digests(const int **cnids)
-{
-	static int nids[CRYPTO_ALGORITHM_MAX];
-	struct session_op sess;
-	int fd, i, count = 0;
-
-	if ((fd = get_dev_crypto()) < 0) {
-		*cnids = NULL;
-		return (0);
-	}
-	memset(&sess, 0, sizeof(sess));
-	for (i = 0; digests[i].id && count < CRYPTO_ALGORITHM_MAX; i++) {
-		if (digests[i].nid == NID_undef)
-			continue;
-		sess.mac = digests[i].id;
-		sess.cipher = 0;
-		if (ioctl(fd, CIOCGSESSION, &sess) != -1 &&
-		    ioctl(fd, CIOCFSESSION, &sess.ses) != -1)
-			nids[count++] = digests[i].nid;
-	}
-	close(fd);
-
-	if (count > 0)
-		*cnids = nids;
-	else
-		*cnids = NULL;
-	return (count);
-}
-
-/*
- * Find the useable ciphers|digests from dev/crypto - this is the first
- * thing called by the engine init crud which determines what it
- * can use for ciphers from this engine. We want to return
- * only what we can do, anythine else is handled by software.
- *
- * If we can't initialize the device to do anything useful for
- * any reason, we want to return a NULL array, and 0 length,
- * which forces everything to be done is software. By putting
- * the initalization of the device in here, we ensure we can
- * use this engine as the default, and if for whatever reason
- * /dev/crypto won't do what we want it will just be done in
- * software
- *
- * This can (should) be greatly expanded to perhaps take into
- * account speed of the device, and what we want to do.
- * (although the disabling of particular alg's could be controlled
- * by the device driver with sysctl's.) - this is where we
- * want most of the decisions made about what we actually want
- * to use from /dev/crypto.
- */
-static int
-cryptodev_usable_ciphers(const int **nids)
-{
-	return (get_cryptodev_ciphers(nids));
-}
-
-static int
-cryptodev_usable_digests(const int **nids)
-{
-	/*
-	 * XXXX just disable all digests for now, because it sucks.
-	 * we need a better way to decide this - i.e. I may not
-	 * want digests on slow cards like hifn on fast machines,
-	 * but might want them on slow or loaded machines, etc.
-	 * will also want them when using crypto cards that don't
-	 * suck moose gonads - would be nice to be able to decide something
-	 * as reasonable default without having hackery that's card dependent.
-	 * of course, the default should probably be just do everything,
-	 * with perhaps a sysctl to turn algoritms off (or have them off
-	 * by default) on cards that generally suck like the hifn.
-	 */
-	*nids = NULL;
-	return (0);
-}
-
-static int
-cryptodev_cipher(EVP_CIPHER_CTX *ctx, unsigned char *out,
-    const unsigned char *in, unsigned int inl)
-{
-	struct crypt_op cryp;
-	struct dev_crypto_state *state = ctx->cipher_data;
-	struct session_op *sess = &state->d_sess;
-	void *iiv;
-	unsigned char save_iv[EVP_MAX_IV_LENGTH];
-
-	if (state->d_fd < 0)
-		return (0);
-	if (!inl)
-		return (1);
-	if ((inl % ctx->cipher->block_size) != 0)
-		return (0);
-
-	memset(&cryp, 0, sizeof(cryp));
-
-	cryp.ses = sess->ses;
-	cryp.flags = 0;
-	cryp.len = inl;
-	cryp.src = (caddr_t) in;
-	cryp.dst = (caddr_t) out;
-	cryp.mac = 0;
-
-	cryp.op = ctx->encrypt ? COP_ENCRYPT : COP_DECRYPT;
-
-	if (ctx->cipher->iv_len) {
-		cryp.iv = (caddr_t) ctx->iv;
-		if (!ctx->encrypt) {
-			iiv = (void *) in + inl - ctx->cipher->iv_len;
-			memcpy(save_iv, iiv, ctx->cipher->iv_len);
-		}
-	} else
-		cryp.iv = NULL;
-
-	if (ioctl(state->d_fd, CIOCCRYPT, &cryp) == -1) {
-		/* XXX need better errror handling
-		 * this can fail for a number of different reasons.
-		 */
-		return (0);
-	}
-
-	if (ctx->cipher->iv_len) {
-		if (ctx->encrypt)
-			iiv = (void *) out + inl - ctx->cipher->iv_len;
-		else
-			iiv = save_iv;
-		memcpy(ctx->iv, iiv, ctx->cipher->iv_len);
-	}
-	return (1);
-}
-
-static int
-cryptodev_init_key(EVP_CIPHER_CTX *ctx, const unsigned char *key,
-    const unsigned char *iv, int enc)
-{
-	struct dev_crypto_state *state = ctx->cipher_data;
-	struct session_op *sess = &state->d_sess;
-	int cipher;
-
-	if ((cipher = cipher_nid_to_cryptodev(ctx->cipher->nid)) == NID_undef)
-		return (0);
-
-	if (ctx->cipher->iv_len > cryptodev_max_iv(cipher))
-		return (0);
-
-	if (!cryptodev_key_length_valid(cipher, ctx->key_len))
-		return (0);
-
-	memset(sess, 0, sizeof(struct session_op));
-
-	if ((state->d_fd = get_dev_crypto()) < 0)
-		return (0);
-
-	sess->key = (unsigned char *)key;
-	sess->keylen = ctx->key_len;
-	sess->cipher = cipher;
-
-	if (ioctl(state->d_fd, CIOCGSESSION, sess) == -1) {
-		close(state->d_fd);
-		state->d_fd = -1;
-		return (0);
-	}
-	return (1);
-}
-
-/*
- * free anything we allocated earlier when initting a
- * session, and close the session.
- */
-static int
-cryptodev_cleanup(EVP_CIPHER_CTX *ctx)
-{
-	int ret = 0;
-	struct dev_crypto_state *state = ctx->cipher_data;
-	struct session_op *sess = &state->d_sess;
-
-	if (state->d_fd < 0)
-		return (0);
-
-	/* XXX if this ioctl fails, someting's wrong. the invoker
-	 * may have called us with a bogus ctx, or we could
-	 * have a device that for whatever reason just doesn't
-	 * want to play ball - it's not clear what's right
-	 * here - should this be an error? should it just
-	 * increase a counter, hmm. For right now, we return
-	 * 0 - I don't believe that to be "right". we could
-	 * call the gorpy openssl lib error handlers that
-	 * print messages to users of the library. hmm..
-	 */
-
-	if (ioctl(state->d_fd, CIOCFSESSION, &sess->ses) == -1) {
-		ret = 0;
-	} else {
-		ret = 1;
-	}
-	close(state->d_fd);
-	state->d_fd = -1;
-
-	return (ret);
-}
-
-/*
- * libcrypto EVP stuff - this is how we get wired to EVP so the engine
- * gets called when libcrypto requests a cipher NID.
- */
-
-/* DES CBC EVP */
-const EVP_CIPHER cryptodev_des_cbc = {
-	NID_des_cbc,
-	8, 8, 8,
-	EVP_CIPH_CBC_MODE,
-	cryptodev_init_key,
-	cryptodev_cipher,
-	cryptodev_cleanup,
-	sizeof(struct dev_crypto_state),
-	EVP_CIPHER_set_asn1_iv,
-	EVP_CIPHER_get_asn1_iv,
-	NULL
-};
-
-/* 3DES CBC EVP */
-const EVP_CIPHER cryptodev_3des_cbc = {
-	NID_des_ede3_cbc,
-	8, 24, 8,
-	EVP_CIPH_CBC_MODE,
-	cryptodev_init_key,
-	cryptodev_cipher,
-	cryptodev_cleanup,
-	sizeof(struct dev_crypto_state),
-	EVP_CIPHER_set_asn1_iv,
-	EVP_CIPHER_get_asn1_iv,
-	NULL
-};
-
-const EVP_CIPHER cryptodev_bf_cbc = {
-	NID_bf_cbc,
-	8, 16, 8,
-	EVP_CIPH_CBC_MODE,
-	cryptodev_init_key,
-	cryptodev_cipher,
-	cryptodev_cleanup,
-	sizeof(struct dev_crypto_state),
-	EVP_CIPHER_set_asn1_iv,
-	EVP_CIPHER_get_asn1_iv,
-	NULL
-};
-
-const EVP_CIPHER cryptodev_cast_cbc = {
-	NID_cast5_cbc,
-	8, 16, 8,
-	EVP_CIPH_CBC_MODE,
-	cryptodev_init_key,
-	cryptodev_cipher,
-	cryptodev_cleanup,
-	sizeof(struct dev_crypto_state),
-	EVP_CIPHER_set_asn1_iv,
-	EVP_CIPHER_get_asn1_iv,
-	NULL
-};
-
-const EVP_CIPHER cryptodev_aes_cbc = {
-	NID_aes_128_cbc,
-	16, 16, 16,
-	EVP_CIPH_CBC_MODE,
-	cryptodev_init_key,
-	cryptodev_cipher,
-	cryptodev_cleanup,
-	sizeof(struct dev_crypto_state),
-	EVP_CIPHER_set_asn1_iv,
-	EVP_CIPHER_get_asn1_iv,
-	NULL
-};
-
-/*
- * Registered by the ENGINE when used to find out how to deal with
- * a particular NID in the ENGINE. this says what we'll do at the
- * top level - note, that list is restricted by what we answer with
- */
-static int
-cryptodev_engine_ciphers(ENGINE *e, const EVP_CIPHER **cipher,
-    const int **nids, int nid)
-{
-	if (!cipher)
-		return (cryptodev_usable_ciphers(nids));
-
-	switch (nid) {
-	case NID_des_ede3_cbc:
-		*cipher = &cryptodev_3des_cbc;
-		break;
-	case NID_des_cbc:
-		*cipher = &cryptodev_des_cbc;
-		break;
-	case NID_bf_cbc:
-		*cipher = &cryptodev_bf_cbc;
-		break;
-	case NID_cast5_cbc:
-		*cipher = &cryptodev_cast_cbc;
-		break;
-	case NID_aes_128_cbc:
-		*cipher = &cryptodev_aes_cbc;
-		break;
-	default:
-		*cipher = NULL;
-		break;
-	}
-	return (*cipher != NULL);
-}
-
-static int
-cryptodev_engine_digests(ENGINE *e, const EVP_MD **digest,
-    const int **nids, int nid)
-{
-	if (!digest)
-		return (cryptodev_usable_digests(nids));
-
-	switch (nid) {
-	case NID_md5:
-		*digest = NULL; /* need to make a clean md5 critter */
-		break;
-	default:
-		*digest = NULL;
-		break;
-	}
-	return (*digest != NULL);
-}
-
-/*
- * Convert a BIGNUM to the representation that /dev/crypto needs.
- * Upon completion of use, the caller is responsible for freeing
- * crp->crp_p.
- */
-static int
-bn2crparam(const BIGNUM *a, struct crparam *crp)
-{
-	int i, j, k;
-	ssize_t words, bytes, bits;
-	u_char *b;
-
-	crp->crp_p = NULL;
-	crp->crp_nbits = 0;
-
-	bits = BN_num_bits(a);
-	bytes = (bits + 7) / 8;
-
-	b = malloc(bytes);
-	if (b == NULL)
-		return (1);
-
-	crp->crp_p = b;
-	crp->crp_nbits = bits;
-
-	for (i = 0, j = 0; i < a->top; i++) {
-		for (k = 0; k < BN_BITS2 / 8; k++) {
-			if ((j + k) >= bytes)
-				return (0);
-			b[j + k] = a->d[i] >> (k * 8);
-		}
-		j += BN_BITS2 / 8;
-	}
-	return (0);
-}
-
-/* Convert a /dev/crypto parameter to a BIGNUM */
-static int
-crparam2bn(struct crparam *crp, BIGNUM *a)
-{
-	u_int8_t *pd;
-	int i, bytes;
-
-	bytes = (crp->crp_nbits + 7) / 8;
-
-	if (bytes == 0)
-		return (-1);
-
-	if ((pd = (u_int8_t *) malloc(bytes)) == NULL)
-		return (-1);
-
-	for (i = 0; i < bytes; i++)
-		pd[i] = crp->crp_p[bytes - i - 1];
-
-	BN_bin2bn(pd, bytes, a);
-	free(pd);
-
-	return (0);
-}
-
-static void
-zapparams(struct crypt_kop *kop)
-{
-	int i;
-
-	for (i = 0; i <= kop->crk_iparams + kop->crk_oparams; i++) {
-		if (kop->crk_param[i].crp_p)
-			free(kop->crk_param[i].crp_p);
-		kop->crk_param[i].crp_p = NULL;
-		kop->crk_param[i].crp_nbits = 0;
-	}
-}
-
-static int
-cryptodev_asym(struct crypt_kop *kop, int rlen, BIGNUM *r, int slen, BIGNUM *s)
-{
-	int fd, ret = -1;
-
-	if ((fd = get_asym_dev_crypto()) < 0)
-		return (ret);
-
-	if (r) {
-		kop->crk_param[kop->crk_iparams].crp_p = calloc(rlen, sizeof(char));
-		kop->crk_param[kop->crk_iparams].crp_nbits = rlen * 8;
-		kop->crk_oparams++;
-	}
-	if (s) {
-		kop->crk_param[kop->crk_iparams+1].crp_p = calloc(slen, sizeof(char));
-		kop->crk_param[kop->crk_iparams+1].crp_nbits = slen * 8;
-		kop->crk_oparams++;
-	}
-
-	if (ioctl(fd, CIOCKEY, kop) == 0) {
-		if (r)
-			crparam2bn(&kop->crk_param[kop->crk_iparams], r);
-		if (s)
-			crparam2bn(&kop->crk_param[kop->crk_iparams+1], s);
-		ret = 0;
-	}
-
-	return (ret);
-}
-
-static int
-cryptodev_bn_mod_exp(BIGNUM *r, const BIGNUM *a, const BIGNUM *p,
-    const BIGNUM *m, BN_CTX *ctx, BN_MONT_CTX *in_mont)
-{
-	struct crypt_kop kop;
-	int ret = 1;
-
-	/* Currently, we know we can do mod exp iff we can do any
-	 * asymmetric operations at all.
-	 */
-	if (cryptodev_asymfeat == 0) {
-		ret = BN_mod_exp(r, a, p, m, ctx);
-		return (ret);
-	}
-
-	memset(&kop, 0, sizeof kop);
-	kop.crk_op = CRK_MOD_EXP;
-
-	/* inputs: a^p % m */
-	if (bn2crparam(a, &kop.crk_param[0]))
-		goto err;
-	if (bn2crparam(p, &kop.crk_param[1]))
-		goto err;
-	if (bn2crparam(m, &kop.crk_param[2]))
-		goto err;
-	kop.crk_iparams = 3;
-
-	if (cryptodev_asym(&kop, BN_num_bytes(m), r, 0, NULL) == -1) {
-		const RSA_METHOD *meth = RSA_PKCS1_SSLeay();
-		ret = meth->bn_mod_exp(r, a, p, m, ctx, in_mont);
-	}
-err:
-	zapparams(&kop);
-	return (ret);
-}
-
-static int
-cryptodev_rsa_nocrt_mod_exp(BIGNUM *r0, const BIGNUM *I, RSA *rsa)
-{
-	int r;
-	BN_CTX *ctx;
-
-	ctx = BN_CTX_new();
-	r = cryptodev_bn_mod_exp(r0, I, rsa->d, rsa->n, ctx, NULL);
-	BN_CTX_free(ctx);
-	return (r);
-}
-
-static int
-cryptodev_rsa_mod_exp(BIGNUM *r0, const BIGNUM *I, RSA *rsa, BN_CTX *ctx)
-{
-	struct crypt_kop kop;
-	int ret = 1;
-
-	if (!rsa->p || !rsa->q || !rsa->dmp1 || !rsa->dmq1 || !rsa->iqmp) {
-		/* XXX 0 means failure?? */
-		return (0);
-	}
-
-	memset(&kop, 0, sizeof kop);
-	kop.crk_op = CRK_MOD_EXP_CRT;
-	/* inputs: rsa->p rsa->q I rsa->dmp1 rsa->dmq1 rsa->iqmp */
-	if (bn2crparam(rsa->p, &kop.crk_param[0]))
-		goto err;
-	if (bn2crparam(rsa->q, &kop.crk_param[1]))
-		goto err;
-	if (bn2crparam(I, &kop.crk_param[2]))
-		goto err;
-	if (bn2crparam(rsa->dmp1, &kop.crk_param[3]))
-		goto err;
-	if (bn2crparam(rsa->dmq1, &kop.crk_param[4]))
-		goto err;
-	if (bn2crparam(rsa->iqmp, &kop.crk_param[5]))
-		goto err;
-	kop.crk_iparams = 6;
-
-	if (cryptodev_asym(&kop, BN_num_bytes(rsa->n), r0, 0, NULL) == -1) {
-		const RSA_METHOD *meth = RSA_PKCS1_SSLeay();
-		ret = (*meth->rsa_mod_exp)(r0, I, rsa, ctx);
-	}
-err:
-	zapparams(&kop);
-	return (ret);
-}
-
-static RSA_METHOD cryptodev_rsa = {
-	"cryptodev RSA method",
-	NULL,				/* rsa_pub_enc */
-	NULL,				/* rsa_pub_dec */
-	NULL,				/* rsa_priv_enc */
-	NULL,				/* rsa_priv_dec */
-	NULL,
-	NULL,
-	NULL,				/* init */
-	NULL,				/* finish */
-	0,				/* flags */
-	NULL,				/* app_data */
-	NULL,				/* rsa_sign */
-	NULL				/* rsa_verify */
-};
-
-static int
-cryptodev_dsa_bn_mod_exp(DSA *dsa, BIGNUM *r, BIGNUM *a, const BIGNUM *p,
-    const BIGNUM *m, BN_CTX *ctx, BN_MONT_CTX *m_ctx)
-{
-	return (cryptodev_bn_mod_exp(r, a, p, m, ctx, m_ctx));
-}
-
-static int
-cryptodev_dsa_dsa_mod_exp(DSA *dsa, BIGNUM *t1, BIGNUM *g,
-    BIGNUM *u1, BIGNUM *pub_key, BIGNUM *u2, BIGNUM *p,
-    BN_CTX *ctx, BN_MONT_CTX *mont)
-{
-	BIGNUM t2;
-	int ret = 0;
-
-	BN_init(&t2);
-
-	/* v = ( g^u1 * y^u2 mod p ) mod q */
-	/* let t1 = g ^ u1 mod p */
-	ret = 0;
-
-	if (!dsa->meth->bn_mod_exp(dsa,t1,dsa->g,u1,dsa->p,ctx,mont))
-		goto err;
-
-	/* let t2 = y ^ u2 mod p */
-	if (!dsa->meth->bn_mod_exp(dsa,&t2,dsa->pub_key,u2,dsa->p,ctx,mont))
-		goto err;
-	/* let u1 = t1 * t2 mod p */
-	if (!BN_mod_mul(u1,t1,&t2,dsa->p,ctx))
-		goto err;
-
-	BN_copy(t1,u1);
-
-	ret = 1;
-err:
-	BN_free(&t2);
-	return(ret);
-}
-
-static DSA_SIG *
-cryptodev_dsa_do_sign(const unsigned char *dgst, int dlen, DSA *dsa)
-{
-	struct crypt_kop kop;
-	BIGNUM *r = NULL, *s = NULL;
-	DSA_SIG *dsaret = NULL;
-
-	if ((r = BN_new()) == NULL)
-		goto err;
-	if ((s = BN_new()) == NULL) {
-		BN_free(r);
-		goto err;
-	}
-
-	memset(&kop, 0, sizeof kop);
-	kop.crk_op = CRK_DSA_SIGN;
-
-	/* inputs: dgst dsa->p dsa->q dsa->g dsa->priv_key */
-	kop.crk_param[0].crp_p = (caddr_t)dgst;
-	kop.crk_param[0].crp_nbits = dlen * 8;
-	if (bn2crparam(dsa->p, &kop.crk_param[1]))
-		goto err;
-	if (bn2crparam(dsa->q, &kop.crk_param[2]))
-		goto err;
-	if (bn2crparam(dsa->g, &kop.crk_param[3]))
-		goto err;
-	if (bn2crparam(dsa->priv_key, &kop.crk_param[4]))
-		goto err;
-	kop.crk_iparams = 5;
-
-	if (cryptodev_asym(&kop, BN_num_bytes(dsa->q), r,
-	    BN_num_bytes(dsa->q), s) == 0) {
-		dsaret = DSA_SIG_new();
-		dsaret->r = r;
-		dsaret->s = s;
-	} else {
-		const DSA_METHOD *meth = DSA_OpenSSL();
-		BN_free(r);
-		BN_free(s);
-		dsaret = (meth->dsa_do_sign)(dgst, dlen, dsa);
-	}
-err:
-	kop.crk_param[0].crp_p = NULL;
-	zapparams(&kop);
-	return (dsaret);
-}
-
-static int
-cryptodev_dsa_verify(const unsigned char *dgst, int dlen,
-    DSA_SIG *sig, DSA *dsa)
-{
-	struct crypt_kop kop;
-	int dsaret = 1;
-
-	memset(&kop, 0, sizeof kop);
-	kop.crk_op = CRK_DSA_VERIFY;
-
-	/* inputs: dgst dsa->p dsa->q dsa->g dsa->pub_key sig->r sig->s */
-	kop.crk_param[0].crp_p = (caddr_t)dgst;
-	kop.crk_param[0].crp_nbits = dlen * 8;
-	if (bn2crparam(dsa->p, &kop.crk_param[1]))
-		goto err;
-	if (bn2crparam(dsa->q, &kop.crk_param[2]))
-		goto err;
-	if (bn2crparam(dsa->g, &kop.crk_param[3]))
-		goto err;
-	if (bn2crparam(dsa->pub_key, &kop.crk_param[4]))
-		goto err;
-	if (bn2crparam(sig->r, &kop.crk_param[5]))
-		goto err;
-	if (bn2crparam(sig->s, &kop.crk_param[6]))
-		goto err;
-	kop.crk_iparams = 7;
-
-	if (cryptodev_asym(&kop, 0, NULL, 0, NULL) == 0) {
-		dsaret = kop.crk_status;
-	} else {
-		const DSA_METHOD *meth = DSA_OpenSSL();
-
-		dsaret = (meth->dsa_do_verify)(dgst, dlen, sig, dsa);
-	}
-err:
-	kop.crk_param[0].crp_p = NULL;
-	zapparams(&kop);
-	return (dsaret);
-}
-
-static DSA_METHOD cryptodev_dsa = {
-	"cryptodev DSA method",
-	NULL,
-	NULL,				/* dsa_sign_setup */
-	NULL,
-	NULL,				/* dsa_mod_exp */
-	NULL,
-	NULL,				/* init */
-	NULL,				/* finish */
-	0,	/* flags */
-	NULL	/* app_data */
-};
-
-static int
-cryptodev_mod_exp_dh(const DH *dh, BIGNUM *r, const BIGNUM *a,
-    const BIGNUM *p, const BIGNUM *m, BN_CTX *ctx,
-    BN_MONT_CTX *m_ctx)
-{
-	return (cryptodev_bn_mod_exp(r, a, p, m, ctx, m_ctx));
-}
-
-static int
-cryptodev_dh_compute_key(unsigned char *key, const BIGNUM *pub_key, DH *dh)
-{
-	struct crypt_kop kop;
-	int dhret = 1;
-	int fd, keylen;
-
-	if ((fd = get_asym_dev_crypto()) < 0) {
-		const DH_METHOD *meth = DH_OpenSSL();
-
-		return ((meth->compute_key)(key, pub_key, dh));
-	}
-
-	keylen = BN_num_bits(dh->p);
-
-	memset(&kop, 0, sizeof kop);
-	kop.crk_op = CRK_DH_COMPUTE_KEY;
-
-	/* inputs: dh->priv_key pub_key dh->p key */
-	if (bn2crparam(dh->priv_key, &kop.crk_param[0]))
-		goto err;
-	if (bn2crparam(pub_key, &kop.crk_param[1]))
-		goto err;
-	if (bn2crparam(dh->p, &kop.crk_param[2]))
-		goto err;
-	kop.crk_iparams = 3;
-
-	kop.crk_param[3].crp_p = key;
-	kop.crk_param[3].crp_nbits = keylen * 8;
-	kop.crk_oparams = 1;
-
-	if (ioctl(fd, CIOCKEY, &kop) == -1) {
-		const DH_METHOD *meth = DH_OpenSSL();
-
-		dhret = (meth->compute_key)(key, pub_key, dh);
-	}
-err:
-	kop.crk_param[3].crp_p = NULL;
-	zapparams(&kop);
-	return (dhret);
-}
-
-static DH_METHOD cryptodev_dh = {
-	"cryptodev DH method",
-	NULL,				/* cryptodev_dh_generate_key */
-	NULL,
-	NULL,
-	NULL,
-	NULL,
-	0,	/* flags */
-	NULL	/* app_data */
-};
-
-/*
- * ctrl right now is just a wrapper that doesn't do much
- * but I expect we'll want some options soon.
- */
-static int
-cryptodev_ctrl(ENGINE *e, int cmd, long i, void *p, void (*f)())
-{
-#ifdef HAVE_SYSLOG_R
-	struct syslog_data sd = SYSLOG_DATA_INIT;
-#endif
-
-	switch (cmd) {
-	default:
-#ifdef HAVE_SYSLOG_R
-		syslog_r(LOG_ERR, &sd,
-		    "cryptodev_ctrl: unknown command %d", cmd);
-#else
-		syslog(LOG_ERR, "cryptodev_ctrl: unknown command %d", cmd);
-#endif
-		break;
-	}
-	return (1);
-}
-
-void
-ENGINE_load_cryptodev(void)
-{
-	ENGINE *engine = ENGINE_new();
-	int fd;
-
-	if (engine == NULL)
-		return;
-	if ((fd = get_dev_crypto()) < 0) {
-		ENGINE_free(engine);
-		return;
-	}
-
-	/*
-	 * find out what asymmetric crypto algorithms we support
-	 */
-	if (ioctl(fd, CIOCASYMFEAT, &cryptodev_asymfeat) == -1) {
-		close(fd);
-		ENGINE_free(engine);
-		return;
-	}
-	close(fd);
-
-	if (!ENGINE_set_id(engine, "cryptodev") ||
-	    !ENGINE_set_name(engine, "BSD cryptodev engine") ||
-	    !ENGINE_set_ciphers(engine, cryptodev_engine_ciphers) ||
-	    !ENGINE_set_digests(engine, cryptodev_engine_digests) ||
-	    !ENGINE_set_ctrl_function(engine, cryptodev_ctrl) ||
-	    !ENGINE_set_cmd_defns(engine, cryptodev_defns)) {
-		ENGINE_free(engine);
-		return;
-	}
-
-	if (ENGINE_set_RSA(engine, &cryptodev_rsa)) {
-		const RSA_METHOD *rsa_meth = RSA_PKCS1_SSLeay();
-
-		cryptodev_rsa.bn_mod_exp = rsa_meth->bn_mod_exp;
-		cryptodev_rsa.rsa_mod_exp = rsa_meth->rsa_mod_exp;
-		cryptodev_rsa.rsa_pub_enc = rsa_meth->rsa_pub_enc;
-		cryptodev_rsa.rsa_pub_dec = rsa_meth->rsa_pub_dec;
-		cryptodev_rsa.rsa_priv_enc = rsa_meth->rsa_priv_enc;
-		cryptodev_rsa.rsa_priv_dec = rsa_meth->rsa_priv_dec;
-		if (cryptodev_asymfeat & CRF_MOD_EXP) {
-			cryptodev_rsa.bn_mod_exp = cryptodev_bn_mod_exp;
-			if (cryptodev_asymfeat & CRF_MOD_EXP_CRT)
-				cryptodev_rsa.rsa_mod_exp =
-				    cryptodev_rsa_mod_exp;
-			else
-				cryptodev_rsa.rsa_mod_exp =
-				    cryptodev_rsa_nocrt_mod_exp;
-		}
-	}
-
-	if (ENGINE_set_DSA(engine, &cryptodev_dsa)) {
-		const DSA_METHOD *meth = DSA_OpenSSL();
-
-		memcpy(&cryptodev_dsa, meth, sizeof(DSA_METHOD));
-		if (cryptodev_asymfeat & CRF_DSA_SIGN)
-			cryptodev_dsa.dsa_do_sign = cryptodev_dsa_do_sign;
-		if (cryptodev_asymfeat & CRF_MOD_EXP) {
-			cryptodev_dsa.bn_mod_exp = cryptodev_dsa_bn_mod_exp;
-			cryptodev_dsa.dsa_mod_exp = cryptodev_dsa_dsa_mod_exp;
-		}
-		if (cryptodev_asymfeat & CRF_DSA_VERIFY)
-			cryptodev_dsa.dsa_do_verify = cryptodev_dsa_verify;
-	}
-
-	if (ENGINE_set_DH(engine, &cryptodev_dh)){
-		const DH_METHOD *dh_meth = DH_OpenSSL();
-
-		cryptodev_dh.generate_key = dh_meth->generate_key;
-		cryptodev_dh.compute_key = dh_meth->compute_key;
-		cryptodev_dh.bn_mod_exp = dh_meth->bn_mod_exp;
-		if (cryptodev_asymfeat & CRF_MOD_EXP) {
-			cryptodev_dh.bn_mod_exp = cryptodev_mod_exp_dh;
-			if (cryptodev_asymfeat & CRF_DH_COMPUTE_KEY)
-				cryptodev_dh.compute_key =
-				    cryptodev_dh_compute_key;
-		}
-	}
-
-	ENGINE_add(engine);
-	ENGINE_free(engine);
-	ERR_clear_error();
-}
-
-#endif /* HAVE_CRYPTODEV */
diff --git a/crypto/openssl/crypto/engine/eng_ctrl.c b/crypto/openssl/crypto/engine/eng_ctrl.c
deleted file mode 100644
index 95b6b455aaf4..000000000000
--- a/crypto/openssl/crypto/engine/eng_ctrl.c
+++ /dev/null
@@ -1,389 +0,0 @@
-/* crypto/engine/eng_ctrl.c */
-/* ====================================================================
- * Copyright (c) 1999-2001 The OpenSSL Project.  All rights reserved.
- *
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions
- * are met:
- *
- * 1. Redistributions of source code must retain the above copyright
- *    notice, this list of conditions and the following disclaimer. 
- *
- * 2. Redistributions in binary form must reproduce the above copyright
- *    notice, this list of conditions and the following disclaimer in
- *    the documentation and/or other materials provided with the
- *    distribution.
- *
- * 3. All advertising materials mentioning features or use of this
- *    software must display the following acknowledgment:
- *    "This product includes software developed by the OpenSSL Project
- *    for use in the OpenSSL Toolkit. (http://www.OpenSSL.org/)"
- *
- * 4. The names "OpenSSL Toolkit" and "OpenSSL Project" must not be used to
- *    endorse or promote products derived from this software without
- *    prior written permission. For written permission, please contact
- *    licensing@OpenSSL.org.
- *
- * 5. Products derived from this software may not be called "OpenSSL"
- *    nor may "OpenSSL" appear in their names without prior written
- *    permission of the OpenSSL Project.
- *
- * 6. Redistributions of any form whatsoever must retain the following
- *    acknowledgment:
- *    "This product includes software developed by the OpenSSL Project
- *    for use in the OpenSSL Toolkit (http://www.OpenSSL.org/)"
- *
- * THIS SOFTWARE IS PROVIDED BY THE OpenSSL PROJECT ``AS IS'' AND ANY
- * EXPRESSED OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
- * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR
- * PURPOSE ARE DISCLAIMED.  IN NO EVENT SHALL THE OpenSSL PROJECT OR
- * ITS CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
- * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
- * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
- * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
- * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
- * STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
- * ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED
- * OF THE POSSIBILITY OF SUCH DAMAGE.
- * ====================================================================
- *
- * This product includes cryptographic software written by Eric Young
- * (eay@cryptsoft.com).  This product includes software written by Tim
- * Hudson (tjh@cryptsoft.com).
- *
- */
-
-#include "eng_int.h"
-
-/* When querying a ENGINE-specific control command's 'description', this string
- * is used if the ENGINE_CMD_DEFN has cmd_desc set to NULL. */
-static const char *int_no_description = "";
-
-/* These internal functions handle 'CMD'-related control commands when the
- * ENGINE in question has asked us to take care of it (ie. the ENGINE did not
- * set the ENGINE_FLAGS_MANUAL_CMD_CTRL flag. */
-
-static int int_ctrl_cmd_is_null(const ENGINE_CMD_DEFN *defn)
-	{
-	if((defn->cmd_num == 0) || (defn->cmd_name == NULL))
-		return 1;
-	return 0;
-	}
-
-static int int_ctrl_cmd_by_name(const ENGINE_CMD_DEFN *defn, const char *s)
-	{
-	int idx = 0;
-	while(!int_ctrl_cmd_is_null(defn) && (strcmp(defn->cmd_name, s) != 0))
-		{
-		idx++;
-		defn++;
-		}
-	if(int_ctrl_cmd_is_null(defn))
-		/* The given name wasn't found */
-		return -1;
-	return idx;
-	}
-
-static int int_ctrl_cmd_by_num(const ENGINE_CMD_DEFN *defn, unsigned int num)
-	{
-	int idx = 0;
-	/* NB: It is stipulated that 'cmd_defn' lists are ordered by cmd_num. So
-	 * our searches don't need to take any longer than necessary. */
-	while(!int_ctrl_cmd_is_null(defn) && (defn->cmd_num < num))
-		{
-		idx++;
-		defn++;
-		}
-	if(defn->cmd_num == num)
-		return idx;
-	/* The given cmd_num wasn't found */
-	return -1;
-	}
-
-static int int_ctrl_helper(ENGINE *e, int cmd, long i, void *p,
-			   void (*f)(void))
-	{
-	int idx;
-	char *s = (char *)p;
-	/* Take care of the easy one first (eg. it requires no searches) */
-	if(cmd == ENGINE_CTRL_GET_FIRST_CMD_TYPE)
-		{
-		if((e->cmd_defns == NULL) || int_ctrl_cmd_is_null(e->cmd_defns))
-			return 0;
-		return e->cmd_defns->cmd_num;
-		}
-	/* One or two commands require that "p" be a valid string buffer */
-	if((cmd == ENGINE_CTRL_GET_CMD_FROM_NAME) ||
-			(cmd == ENGINE_CTRL_GET_NAME_FROM_CMD) ||
-			(cmd == ENGINE_CTRL_GET_DESC_FROM_CMD))
-		{
-		if(s == NULL)
-			{
-			ENGINEerr(ENGINE_F_INT_CTRL_HELPER,
-				ERR_R_PASSED_NULL_PARAMETER);
-			return -1;
-			}
-		}
-	/* Now handle cmd_name -> cmd_num conversion */
-	if(cmd == ENGINE_CTRL_GET_CMD_FROM_NAME)
-		{
-		if((e->cmd_defns == NULL) || ((idx = int_ctrl_cmd_by_name(
-						e->cmd_defns, s)) < 0))
-			{
-			ENGINEerr(ENGINE_F_INT_CTRL_HELPER,
-				ENGINE_R_INVALID_CMD_NAME);
-			return -1;
-			}
-		return e->cmd_defns[idx].cmd_num;
-		}
-	/* For the rest of the commands, the 'long' argument must specify a
-	 * valie command number - so we need to conduct a search. */
-	if((e->cmd_defns == NULL) || ((idx = int_ctrl_cmd_by_num(e->cmd_defns,
-					(unsigned int)i)) < 0))
-		{
-		ENGINEerr(ENGINE_F_INT_CTRL_HELPER,
-			ENGINE_R_INVALID_CMD_NUMBER);
-		return -1;
-		}
-	/* Now the logic splits depending on command type */
-	switch(cmd)
-		{
-	case ENGINE_CTRL_GET_NEXT_CMD_TYPE:
-		idx++;
-		if(int_ctrl_cmd_is_null(e->cmd_defns + idx))
-			/* end-of-list */
-			return 0;
-		else
-			return e->cmd_defns[idx].cmd_num;
-	case ENGINE_CTRL_GET_NAME_LEN_FROM_CMD:
-		return strlen(e->cmd_defns[idx].cmd_name);
-	case ENGINE_CTRL_GET_NAME_FROM_CMD:
-		return BIO_snprintf(s,strlen(e->cmd_defns[idx].cmd_name) + 1,
-				    "%s", e->cmd_defns[idx].cmd_name);
-	case ENGINE_CTRL_GET_DESC_LEN_FROM_CMD:
-		if(e->cmd_defns[idx].cmd_desc)
-			return strlen(e->cmd_defns[idx].cmd_desc);
-		return strlen(int_no_description);
-	case ENGINE_CTRL_GET_DESC_FROM_CMD:
-		if(e->cmd_defns[idx].cmd_desc)
-			return BIO_snprintf(s,
-					    strlen(e->cmd_defns[idx].cmd_desc) + 1,
-					    "%s", e->cmd_defns[idx].cmd_desc);
-		return BIO_snprintf(s, strlen(int_no_description) + 1,"%s",
-				    int_no_description);
-	case ENGINE_CTRL_GET_CMD_FLAGS:
-		return e->cmd_defns[idx].cmd_flags;
-		}
-	/* Shouldn't really be here ... */
-	ENGINEerr(ENGINE_F_INT_CTRL_HELPER,ENGINE_R_INTERNAL_LIST_ERROR);
-	return -1;
-	}
-
-int ENGINE_ctrl(ENGINE *e, int cmd, long i, void *p, void (*f)(void))
-	{
-	int ctrl_exists, ref_exists;
-	if(e == NULL)
-		{
-		ENGINEerr(ENGINE_F_ENGINE_CTRL,ERR_R_PASSED_NULL_PARAMETER);
-		return 0;
-		}
-	CRYPTO_w_lock(CRYPTO_LOCK_ENGINE);
-	ref_exists = ((e->struct_ref > 0) ? 1 : 0);
-	CRYPTO_w_unlock(CRYPTO_LOCK_ENGINE);
-	ctrl_exists = ((e->ctrl == NULL) ? 0 : 1);
-	if(!ref_exists)
-		{
-		ENGINEerr(ENGINE_F_ENGINE_CTRL,ENGINE_R_NO_REFERENCE);
-		return 0;
-		}
-	/* Intercept any "root-level" commands before trying to hand them on to
-	 * ctrl() handlers. */
-	switch(cmd)
-		{
-	case ENGINE_CTRL_HAS_CTRL_FUNCTION:
-		return ctrl_exists;
-	case ENGINE_CTRL_GET_FIRST_CMD_TYPE:
-	case ENGINE_CTRL_GET_NEXT_CMD_TYPE:
-	case ENGINE_CTRL_GET_CMD_FROM_NAME:
-	case ENGINE_CTRL_GET_NAME_LEN_FROM_CMD:
-	case ENGINE_CTRL_GET_NAME_FROM_CMD:
-	case ENGINE_CTRL_GET_DESC_LEN_FROM_CMD:
-	case ENGINE_CTRL_GET_DESC_FROM_CMD:
-	case ENGINE_CTRL_GET_CMD_FLAGS:
-		if(ctrl_exists && !(e->flags & ENGINE_FLAGS_MANUAL_CMD_CTRL))
-			return int_ctrl_helper(e,cmd,i,p,f);
-		if(!ctrl_exists)
-			{
-			ENGINEerr(ENGINE_F_ENGINE_CTRL,ENGINE_R_NO_CONTROL_FUNCTION);
-			/* For these cmd-related functions, failure is indicated
-			 * by a -1 return value (because 0 is used as a valid
-			 * return in some places). */
-			return -1;
-			}
-	default:
-		break;
-		}
-	/* Anything else requires a ctrl() handler to exist. */
-	if(!ctrl_exists)
-		{
-		ENGINEerr(ENGINE_F_ENGINE_CTRL,ENGINE_R_NO_CONTROL_FUNCTION);
-		return 0;
-		}
-	return e->ctrl(e, cmd, i, p, f);
-	}
-
-int ENGINE_cmd_is_executable(ENGINE *e, int cmd)
-	{
-	int flags;
-	if((flags = ENGINE_ctrl(e, ENGINE_CTRL_GET_CMD_FLAGS, cmd, NULL, NULL)) < 0)
-		{
-		ENGINEerr(ENGINE_F_ENGINE_CMD_IS_EXECUTABLE,
-			ENGINE_R_INVALID_CMD_NUMBER);
-		return 0;
-		}
-	if(!(flags & ENGINE_CMD_FLAG_NO_INPUT) &&
-			!(flags & ENGINE_CMD_FLAG_NUMERIC) &&
-			!(flags & ENGINE_CMD_FLAG_STRING))
-		return 0;
-	return 1;
-	}
-
-int ENGINE_ctrl_cmd(ENGINE *e, const char *cmd_name,
-        long i, void *p, void (*f)(void), int cmd_optional)
-        {
-	int num;
-
-	if((e == NULL) || (cmd_name == NULL))
-		{
-		ENGINEerr(ENGINE_F_ENGINE_CTRL_CMD,
-			ERR_R_PASSED_NULL_PARAMETER);
-		return 0;
-		}
-	if((e->ctrl == NULL) || ((num = ENGINE_ctrl(e,
-					ENGINE_CTRL_GET_CMD_FROM_NAME,
-					0, (void *)cmd_name, NULL)) <= 0))
-		{
-		/* If the command didn't *have* to be supported, we fake
-		 * success. This allows certain settings to be specified for
-		 * multiple ENGINEs and only require a change of ENGINE id
-		 * (without having to selectively apply settings). Eg. changing
-		 * from a hardware device back to the regular software ENGINE
-		 * without editing the config file, etc. */
-		if(cmd_optional)
-			{
-			ERR_clear_error();
-			return 1;
-			}
-		ENGINEerr(ENGINE_F_ENGINE_CTRL_CMD,
-			ENGINE_R_INVALID_CMD_NAME);
-		return 0;
-		}
-	/* Force the result of the control command to 0 or 1, for the reasons
-	 * mentioned before. */
-        if (ENGINE_ctrl(e, num, i, p, f))
-                return 1;
-        return 0;
-        }
-
-int ENGINE_ctrl_cmd_string(ENGINE *e, const char *cmd_name, const char *arg,
-				int cmd_optional)
-	{
-	int num, flags;
-	long l;
-	char *ptr;
-	if((e == NULL) || (cmd_name == NULL))
-		{
-		ENGINEerr(ENGINE_F_ENGINE_CTRL_CMD_STRING,
-			ERR_R_PASSED_NULL_PARAMETER);
-		return 0;
-		}
-	if((e->ctrl == NULL) || ((num = ENGINE_ctrl(e,
-					ENGINE_CTRL_GET_CMD_FROM_NAME,
-					0, (void *)cmd_name, NULL)) <= 0))
-		{
-		/* If the command didn't *have* to be supported, we fake
-		 * success. This allows certain settings to be specified for
-		 * multiple ENGINEs and only require a change of ENGINE id
-		 * (without having to selectively apply settings). Eg. changing
-		 * from a hardware device back to the regular software ENGINE
-		 * without editing the config file, etc. */
-		if(cmd_optional)
-			{
-			ERR_clear_error();
-			return 1;
-			}
-		ENGINEerr(ENGINE_F_ENGINE_CTRL_CMD_STRING,
-			ENGINE_R_INVALID_CMD_NAME);
-		return 0;
-		}
-	if(!ENGINE_cmd_is_executable(e, num))
-		{
-		ENGINEerr(ENGINE_F_ENGINE_CTRL_CMD_STRING,
-			ENGINE_R_CMD_NOT_EXECUTABLE);
-		return 0;
-		}
-	if((flags = ENGINE_ctrl(e, ENGINE_CTRL_GET_CMD_FLAGS, num, NULL, NULL)) < 0)
-		{
-		/* Shouldn't happen, given that ENGINE_cmd_is_executable()
-		 * returned success. */
-		ENGINEerr(ENGINE_F_ENGINE_CTRL_CMD_STRING,
-			ENGINE_R_INTERNAL_LIST_ERROR);
-		return 0;
-		}
-	/* If the command takes no input, there must be no input. And vice
-	 * versa. */
-	if(flags & ENGINE_CMD_FLAG_NO_INPUT)
-		{
-		if(arg != NULL)
-			{
-			ENGINEerr(ENGINE_F_ENGINE_CTRL_CMD_STRING,
-				ENGINE_R_COMMAND_TAKES_NO_INPUT);
-			return 0;
-			}
-		/* We deliberately force the result of ENGINE_ctrl() to 0 or 1
-		 * rather than returning it as "return data". This is to ensure
-		 * usage of these commands is consistent across applications and
-		 * that certain applications don't understand it one way, and
-		 * others another. */
-		if(ENGINE_ctrl(e, num, 0, (void *)arg, NULL))
-			return 1;
-		return 0;
-		}
-	/* So, we require input */
-	if(arg == NULL)
-		{
-		ENGINEerr(ENGINE_F_ENGINE_CTRL_CMD_STRING,
-			ENGINE_R_COMMAND_TAKES_INPUT);
-		return 0;
-		}
-	/* If it takes string input, that's easy */
-	if(flags & ENGINE_CMD_FLAG_STRING)
-		{
-		/* Same explanation as above */
-		if(ENGINE_ctrl(e, num, 0, (void *)arg, NULL))
-			return 1;
-		return 0;
-		}
-	/* If it doesn't take numeric either, then it is unsupported for use in
-	 * a config-setting situation, which is what this function is for. This
-	 * should never happen though, because ENGINE_cmd_is_executable() was
-	 * used. */
-	if(!(flags & ENGINE_CMD_FLAG_NUMERIC))
-		{
-		ENGINEerr(ENGINE_F_ENGINE_CTRL_CMD_STRING,
-			ENGINE_R_INTERNAL_LIST_ERROR);
-		return 0;
-		}
-	l = strtol(arg, &ptr, 10);
-	if((arg == ptr) || (*ptr != '\0'))
-		{
-		ENGINEerr(ENGINE_F_ENGINE_CTRL_CMD_STRING,
-			ENGINE_R_ARGUMENT_IS_NOT_A_NUMBER);
-		return 0;
-		}
-	/* Force the result of the control command to 0 or 1, for the reasons
-	 * mentioned before. */
-	if(ENGINE_ctrl(e, num, l, NULL, NULL))
-		return 1;
-	return 0;
-	}
diff --git a/crypto/openssl/crypto/engine/eng_dyn.c b/crypto/openssl/crypto/engine/eng_dyn.c
deleted file mode 100644
index acb30c34d899..000000000000
--- a/crypto/openssl/crypto/engine/eng_dyn.c
+++ /dev/null
@@ -1,548 +0,0 @@
-/* crypto/engine/eng_dyn.c */
-/* Written by Geoff Thorpe (geoff@geoffthorpe.net) for the OpenSSL
- * project 2001.
- */
-/* ====================================================================
- * Copyright (c) 1999-2001 The OpenSSL Project.  All rights reserved.
- *
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions
- * are met:
- *
- * 1. Redistributions of source code must retain the above copyright
- *    notice, this list of conditions and the following disclaimer. 
- *
- * 2. Redistributions in binary form must reproduce the above copyright
- *    notice, this list of conditions and the following disclaimer in
- *    the documentation and/or other materials provided with the
- *    distribution.
- *
- * 3. All advertising materials mentioning features or use of this
- *    software must display the following acknowledgment:
- *    "This product includes software developed by the OpenSSL Project
- *    for use in the OpenSSL Toolkit. (http://www.OpenSSL.org/)"
- *
- * 4. The names "OpenSSL Toolkit" and "OpenSSL Project" must not be used to
- *    endorse or promote products derived from this software without
- *    prior written permission. For written permission, please contact
- *    licensing@OpenSSL.org.
- *
- * 5. Products derived from this software may not be called "OpenSSL"
- *    nor may "OpenSSL" appear in their names without prior written
- *    permission of the OpenSSL Project.
- *
- * 6. Redistributions of any form whatsoever must retain the following
- *    acknowledgment:
- *    "This product includes software developed by the OpenSSL Project
- *    for use in the OpenSSL Toolkit (http://www.OpenSSL.org/)"
- *
- * THIS SOFTWARE IS PROVIDED BY THE OpenSSL PROJECT ``AS IS'' AND ANY
- * EXPRESSED OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
- * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR
- * PURPOSE ARE DISCLAIMED.  IN NO EVENT SHALL THE OpenSSL PROJECT OR
- * ITS CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
- * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
- * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
- * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
- * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
- * STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
- * ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED
- * OF THE POSSIBILITY OF SUCH DAMAGE.
- * ====================================================================
- *
- * This product includes cryptographic software written by Eric Young
- * (eay@cryptsoft.com).  This product includes software written by Tim
- * Hudson (tjh@cryptsoft.com).
- *
- */
-
-
-#include "eng_int.h"
-#include <openssl/dso.h>
-
-/* Shared libraries implementing ENGINEs for use by the "dynamic" ENGINE loader
- * should implement the hook-up functions with the following prototypes. */
-
-/* Our ENGINE handlers */
-static int dynamic_init(ENGINE *e);
-static int dynamic_finish(ENGINE *e);
-static int dynamic_ctrl(ENGINE *e, int cmd, long i, void *p, void (*f)(void));
-/* Predeclare our context type */
-typedef struct st_dynamic_data_ctx dynamic_data_ctx;
-/* The implementation for the important control command */
-static int dynamic_load(ENGINE *e, dynamic_data_ctx *ctx);
-
-#define DYNAMIC_CMD_SO_PATH		ENGINE_CMD_BASE
-#define DYNAMIC_CMD_NO_VCHECK		(ENGINE_CMD_BASE + 1)
-#define DYNAMIC_CMD_ID			(ENGINE_CMD_BASE + 2)
-#define DYNAMIC_CMD_LIST_ADD		(ENGINE_CMD_BASE + 3)
-#define DYNAMIC_CMD_DIR_LOAD		(ENGINE_CMD_BASE + 4)
-#define DYNAMIC_CMD_DIR_ADD		(ENGINE_CMD_BASE + 5)
-#define DYNAMIC_CMD_LOAD		(ENGINE_CMD_BASE + 6)
-
-/* The constants used when creating the ENGINE */
-static const char *engine_dynamic_id = "dynamic";
-static const char *engine_dynamic_name = "Dynamic engine loading support";
-static const ENGINE_CMD_DEFN dynamic_cmd_defns[] = {
-	{DYNAMIC_CMD_SO_PATH,
-		"SO_PATH",
-		"Specifies the path to the new ENGINE shared library",
-		ENGINE_CMD_FLAG_STRING},
-	{DYNAMIC_CMD_NO_VCHECK,
-		"NO_VCHECK",
-		"Specifies to continue even if version checking fails (boolean)",
-		ENGINE_CMD_FLAG_NUMERIC},
-	{DYNAMIC_CMD_ID,
-		"ID",
-		"Specifies an ENGINE id name for loading",
-		ENGINE_CMD_FLAG_STRING},
-	{DYNAMIC_CMD_LIST_ADD,
-		"LIST_ADD",
-		"Whether to add a loaded ENGINE to the internal list (0=no,1=yes,2=mandatory)",
-		ENGINE_CMD_FLAG_NUMERIC},
-	{DYNAMIC_CMD_DIR_LOAD,
-		"DIR_LOAD",
-		"Specifies whether to load from 'DIR_ADD' directories (0=no,1=yes,2=mandatory)",
-		ENGINE_CMD_FLAG_NUMERIC},
-	{DYNAMIC_CMD_DIR_ADD,
-		"DIR_ADD",
-		"Adds a directory from which ENGINEs can be loaded",
-		ENGINE_CMD_FLAG_STRING},
-	{DYNAMIC_CMD_LOAD,
-		"LOAD",
-		"Load up the ENGINE specified by other settings",
-		ENGINE_CMD_FLAG_NO_INPUT},
-	{0, NULL, NULL, 0}
-	};
-static const ENGINE_CMD_DEFN dynamic_cmd_defns_empty[] = {
-	{0, NULL, NULL, 0}
-	};
-
-/* Loading code stores state inside the ENGINE structure via the "ex_data"
- * element. We load all our state into a single structure and use that as a
- * single context in the "ex_data" stack. */
-struct st_dynamic_data_ctx
-	{
-	/* The DSO object we load that supplies the ENGINE code */
-	DSO *dynamic_dso;
-	/* The function pointer to the version checking shared library function */
-	dynamic_v_check_fn v_check;
-	/* The function pointer to the engine-binding shared library function */
-	dynamic_bind_engine bind_engine;
-	/* The default name/path for loading the shared library */
-	const char *DYNAMIC_LIBNAME;
-	/* Whether to continue loading on a version check failure */
-	int no_vcheck;
-	/* If non-NULL, stipulates the 'id' of the ENGINE to be loaded */
-	const char *engine_id;
-	/* If non-zero, a successfully loaded ENGINE should be added to the internal
-	 * ENGINE list. If 2, the add must succeed or the entire load should fail. */
-	int list_add_value;
-	/* The symbol name for the version checking function */
-	const char *DYNAMIC_F1;
-	/* The symbol name for the "initialise ENGINE structure" function */
-	const char *DYNAMIC_F2;
-	/* Whether to never use 'dirs', use 'dirs' as a fallback, or only use
-	 * 'dirs' for loading. Default is to use 'dirs' as a fallback. */
-	int dir_load;
-	/* A stack of directories from which ENGINEs could be loaded */
-	STACK *dirs;
-	};
-
-/* This is the "ex_data" index we obtain and reserve for use with our context
- * structure. */
-static int dynamic_ex_data_idx = -1;
-
-static void int_free_str(void *s) { OPENSSL_free(s); }
-/* Because our ex_data element may or may not get allocated depending on whether
- * a "first-use" occurs before the ENGINE is freed, we have a memory leak
- * problem to solve. We can't declare a "new" handler for the ex_data as we
- * don't want a dynamic_data_ctx in *all* ENGINE structures of all types (this
- * is a bug in the design of CRYPTO_EX_DATA). As such, we just declare a "free"
- * handler and that will get called if an ENGINE is being destroyed and there
- * was an ex_data element corresponding to our context type. */
-static void dynamic_data_ctx_free_func(void *parent, void *ptr,
-			CRYPTO_EX_DATA *ad, int idx, long argl, void *argp)
-	{
-	if(ptr)
-		{
-		dynamic_data_ctx *ctx = (dynamic_data_ctx *)ptr;
-		if(ctx->dynamic_dso)
-			DSO_free(ctx->dynamic_dso);
-		if(ctx->DYNAMIC_LIBNAME)
-			OPENSSL_free((void*)ctx->DYNAMIC_LIBNAME);
-		if(ctx->engine_id)
-			OPENSSL_free((void*)ctx->engine_id);
-		if(ctx->dirs)
-			sk_pop_free(ctx->dirs, int_free_str);
-		OPENSSL_free(ctx);
-		}
-	}
-
-/* Construct the per-ENGINE context. We create it blindly and then use a lock to
- * check for a race - if so, all but one of the threads "racing" will have
- * wasted their time. The alternative involves creating everything inside the
- * lock which is far worse. */
-static int dynamic_set_data_ctx(ENGINE *e, dynamic_data_ctx **ctx)
-	{
-	dynamic_data_ctx *c;
-	c = OPENSSL_malloc(sizeof(dynamic_data_ctx));
-	if(!c)
-		{
-		ENGINEerr(ENGINE_F_DYNAMIC_SET_DATA_CTX,ERR_R_MALLOC_FAILURE);
-		return 0;
-		}
-	memset(c, 0, sizeof(dynamic_data_ctx));
-	c->dynamic_dso = NULL;
-	c->v_check = NULL;
-	c->bind_engine = NULL;
-	c->DYNAMIC_LIBNAME = NULL;
-	c->no_vcheck = 0;
-	c->engine_id = NULL;
-	c->list_add_value = 0;
-	c->DYNAMIC_F1 = "v_check";
-	c->DYNAMIC_F2 = "bind_engine";
-	c->dir_load = 1;
-	c->dirs = sk_new_null();
-	if(!c->dirs)
-		{
-		ENGINEerr(ENGINE_F_DYNAMIC_SET_DATA_CTX,ERR_R_MALLOC_FAILURE);
-		OPENSSL_free(c);
-		return 0;
-		}
-	CRYPTO_w_lock(CRYPTO_LOCK_ENGINE);
-	if((*ctx = (dynamic_data_ctx *)ENGINE_get_ex_data(e,
-				dynamic_ex_data_idx)) == NULL)
-		{
-		/* Good, we're the first */
-		ENGINE_set_ex_data(e, dynamic_ex_data_idx, c);
-		*ctx = c;
-		c = NULL;
-		}
-	CRYPTO_w_unlock(CRYPTO_LOCK_ENGINE);
-	/* If we lost the race to set the context, c is non-NULL and *ctx is the
-	 * context of the thread that won. */
-	if(c)
-		OPENSSL_free(c);
-	return 1;
-	}
-
-/* This function retrieves the context structure from an ENGINE's "ex_data", or
- * if it doesn't exist yet, sets it up. */
-static dynamic_data_ctx *dynamic_get_data_ctx(ENGINE *e)
-	{
-	dynamic_data_ctx *ctx;
-	if(dynamic_ex_data_idx < 0)
-		{
-		/* Create and register the ENGINE ex_data, and associate our
-		 * "free" function with it to ensure any allocated contexts get
-		 * freed when an ENGINE goes underground. */
-		int new_idx = ENGINE_get_ex_new_index(0, NULL, NULL, NULL,
-					dynamic_data_ctx_free_func);
-		if(new_idx == -1)
-			{
-			ENGINEerr(ENGINE_F_DYNAMIC_GET_DATA_CTX,ENGINE_R_NO_INDEX);
-			return NULL;
-			}
-		CRYPTO_w_lock(CRYPTO_LOCK_ENGINE);
-		/* Avoid a race by checking again inside this lock */
-		if(dynamic_ex_data_idx < 0)
-			{
-			/* Good, someone didn't beat us to it */
-			dynamic_ex_data_idx = new_idx;
-			new_idx = -1;
-			}
-		CRYPTO_w_unlock(CRYPTO_LOCK_ENGINE);
-		/* In theory we could "give back" the index here if
-		 * (new_idx>-1), but it's not possible and wouldn't gain us much
-		 * if it were. */
-		}
-	ctx = (dynamic_data_ctx *)ENGINE_get_ex_data(e, dynamic_ex_data_idx);
-	/* Check if the context needs to be created */
-	if((ctx == NULL) && !dynamic_set_data_ctx(e, &ctx))
-		/* "set_data" will set errors if necessary */
-		return NULL;
-	return ctx;
-	}
-
-static ENGINE *engine_dynamic(void)
-	{
-	ENGINE *ret = ENGINE_new();
-	if(!ret)
-		return NULL;
-	if(!ENGINE_set_id(ret, engine_dynamic_id) ||
-			!ENGINE_set_name(ret, engine_dynamic_name) ||
-			!ENGINE_set_init_function(ret, dynamic_init) ||
-			!ENGINE_set_finish_function(ret, dynamic_finish) ||
-			!ENGINE_set_ctrl_function(ret, dynamic_ctrl) ||
-			!ENGINE_set_flags(ret, ENGINE_FLAGS_BY_ID_COPY) ||
-			!ENGINE_set_cmd_defns(ret, dynamic_cmd_defns))
-		{
-		ENGINE_free(ret);
-		return NULL;
-		}
-	return ret;
-	}
-
-void ENGINE_load_dynamic(void)
-	{
-	ENGINE *toadd = engine_dynamic();
-	if(!toadd) return;
-	ENGINE_add(toadd);
-	/* If the "add" worked, it gets a structural reference. So either way,
-	 * we release our just-created reference. */
-	ENGINE_free(toadd);
-	/* If the "add" didn't work, it was probably a conflict because it was
-	 * already added (eg. someone calling ENGINE_load_blah then calling
-	 * ENGINE_load_builtin_engines() perhaps). */
-	ERR_clear_error();
-	}
-
-static int dynamic_init(ENGINE *e)
-	{
-	/* We always return failure - the "dyanamic" engine itself can't be used
-	 * for anything. */
-	return 0;
-	}
-
-static int dynamic_finish(ENGINE *e)
-	{
-	/* This should never be called on account of "dynamic_init" always
-	 * failing. */
-	return 0;
-	}
-
-static int dynamic_ctrl(ENGINE *e, int cmd, long i, void *p, void (*f)(void))
-	{
-	dynamic_data_ctx *ctx = dynamic_get_data_ctx(e);
-	int initialised;
-	
-	if(!ctx)
-		{
-		ENGINEerr(ENGINE_F_DYNAMIC_CTRL,ENGINE_R_NOT_LOADED);
-		return 0;
-		}
-	initialised = ((ctx->dynamic_dso == NULL) ? 0 : 1);
-	/* All our control commands require the ENGINE to be uninitialised */
-	if(initialised)
-		{
-		ENGINEerr(ENGINE_F_DYNAMIC_CTRL,
-			ENGINE_R_ALREADY_LOADED);
-		return 0;
-		}
-	switch(cmd)
-		{
-	case DYNAMIC_CMD_SO_PATH:
-		/* a NULL 'p' or a string of zero-length is the same thing */
-		if(p && (strlen((const char *)p) < 1))
-			p = NULL;
-		if(ctx->DYNAMIC_LIBNAME)
-			OPENSSL_free((void*)ctx->DYNAMIC_LIBNAME);
-		if(p)
-			ctx->DYNAMIC_LIBNAME = BUF_strdup(p);
-		else
-			ctx->DYNAMIC_LIBNAME = NULL;
-		return (ctx->DYNAMIC_LIBNAME ? 1 : 0);
-	case DYNAMIC_CMD_NO_VCHECK:
-		ctx->no_vcheck = ((i == 0) ? 0 : 1);
-		return 1;
-	case DYNAMIC_CMD_ID:
-		/* a NULL 'p' or a string of zero-length is the same thing */
-		if(p && (strlen((const char *)p) < 1))
-			p = NULL;
-		if(ctx->engine_id)
-			OPENSSL_free((void*)ctx->engine_id);
-		if(p)
-			ctx->engine_id = BUF_strdup(p);
-		else
-			ctx->engine_id = NULL;
-		return (ctx->engine_id ? 1 : 0);
-	case DYNAMIC_CMD_LIST_ADD:
-		if((i < 0) || (i > 2))
-			{
-			ENGINEerr(ENGINE_F_DYNAMIC_CTRL,
-				ENGINE_R_INVALID_ARGUMENT);
-			return 0;
-			}
-		ctx->list_add_value = (int)i;
-		return 1;
-	case DYNAMIC_CMD_LOAD:
-		return dynamic_load(e, ctx);
-	case DYNAMIC_CMD_DIR_LOAD:
-		if((i < 0) || (i > 2))
-			{
-			ENGINEerr(ENGINE_F_DYNAMIC_CTRL,
-				ENGINE_R_INVALID_ARGUMENT);
-			return 0;
-			}
-		ctx->dir_load = (int)i;
-		return 1;
-	case DYNAMIC_CMD_DIR_ADD:
-		/* a NULL 'p' or a string of zero-length is the same thing */
-		if(!p || (strlen((const char *)p) < 1))
-			{
-			ENGINEerr(ENGINE_F_DYNAMIC_CTRL,
-				ENGINE_R_INVALID_ARGUMENT);
-			return 0;
-			}
-		{
-		char *tmp_str = BUF_strdup(p);
-		if(!tmp_str)
-			{
-			ENGINEerr(ENGINE_F_DYNAMIC_CTRL,
-				ERR_R_MALLOC_FAILURE);
-			return 0;
-			}
-		sk_insert(ctx->dirs, tmp_str, -1);
-		}
-		return 1;
-	default:
-		break;
-		}
-	ENGINEerr(ENGINE_F_DYNAMIC_CTRL,ENGINE_R_CTRL_COMMAND_NOT_IMPLEMENTED);
-	return 0;
-	}
-
-static int int_load(dynamic_data_ctx *ctx)
-	{
-	int num, loop;
-	/* Unless told not to, try a direct load */
-	if((ctx->dir_load != 2) && (DSO_load(ctx->dynamic_dso,
-				ctx->DYNAMIC_LIBNAME, NULL, 0)) != NULL)
-		return 1;
-	/* If we're not allowed to use 'dirs' or we have none, fail */
-	if(!ctx->dir_load || ((num = sk_num(ctx->dirs)) < 1))
-		return 0;
-	for(loop = 0; loop < num; loop++)
-		{
-		const char *s = sk_value(ctx->dirs, loop);
-		char *merge = DSO_merge(ctx->dynamic_dso, ctx->DYNAMIC_LIBNAME, s);
-		if(!merge)
-			return 0;
-		if(DSO_load(ctx->dynamic_dso, merge, NULL, 0))
-			{
-			/* Found what we're looking for */
-			OPENSSL_free(merge);
-			return 1;
-			}
-		OPENSSL_free(merge);
-		}
-	return 0;
-	}
-
-static int dynamic_load(ENGINE *e, dynamic_data_ctx *ctx)
-	{
-	ENGINE cpy;
-	dynamic_fns fns;
-
-	if(!ctx->dynamic_dso)
-		ctx->dynamic_dso = DSO_new();
-	if(!ctx->DYNAMIC_LIBNAME)
-		{
-		if(!ctx->engine_id)
-			return 0;
-		ctx->DYNAMIC_LIBNAME =
-			DSO_convert_filename(ctx->dynamic_dso, ctx->engine_id);
-		}
-	if(!int_load(ctx))
-		{
-		ENGINEerr(ENGINE_F_DYNAMIC_LOAD,
-			ENGINE_R_DSO_NOT_FOUND);
-		DSO_free(ctx->dynamic_dso);
-		ctx->dynamic_dso = NULL;
-		return 0;
-		}
-	/* We have to find a bind function otherwise it'll always end badly */
-	if(!(ctx->bind_engine = (dynamic_bind_engine)DSO_bind_func(
-					ctx->dynamic_dso, ctx->DYNAMIC_F2)))
-		{
-		ctx->bind_engine = NULL;
-		DSO_free(ctx->dynamic_dso);
-		ctx->dynamic_dso = NULL;
-		ENGINEerr(ENGINE_F_DYNAMIC_LOAD,
-			ENGINE_R_DSO_FAILURE);
-		return 0;
-		}
-	/* Do we perform version checking? */
-	if(!ctx->no_vcheck)
-		{
-		unsigned long vcheck_res = 0;
-		/* Now we try to find a version checking function and decide how
-		 * to cope with failure if/when it fails. */
-		ctx->v_check = (dynamic_v_check_fn)DSO_bind_func(
-				ctx->dynamic_dso, ctx->DYNAMIC_F1);
-		if(ctx->v_check)
-			vcheck_res = ctx->v_check(OSSL_DYNAMIC_VERSION);
-		/* We fail if the version checker veto'd the load *or* if it is
-		 * deferring to us (by returning its version) and we think it is
-		 * too old. */
-		if(vcheck_res < OSSL_DYNAMIC_OLDEST)
-			{
-			/* Fail */
-			ctx->bind_engine = NULL;
-			ctx->v_check = NULL;
-			DSO_free(ctx->dynamic_dso);
-			ctx->dynamic_dso = NULL;
-			ENGINEerr(ENGINE_F_DYNAMIC_LOAD,
-				ENGINE_R_VERSION_INCOMPATIBILITY);
-			return 0;
-			}
-		}
-	/* First binary copy the ENGINE structure so that we can roll back if
-	 * the hand-over fails */
-	memcpy(&cpy, e, sizeof(ENGINE));
-	/* Provide the ERR, "ex_data", memory, and locking callbacks so the
-	 * loaded library uses our state rather than its own. FIXME: As noted in
-	 * engine.h, much of this would be simplified if each area of code
-	 * provided its own "summary" structure of all related callbacks. It
-	 * would also increase opaqueness. */
-	fns.static_state = ENGINE_get_static_state();
-	fns.err_fns = ERR_get_implementation();
-	fns.ex_data_fns = CRYPTO_get_ex_data_implementation();
-	CRYPTO_get_mem_functions(&fns.mem_fns.malloc_cb,
-				&fns.mem_fns.realloc_cb,
-				&fns.mem_fns.free_cb);
-	fns.lock_fns.lock_locking_cb = CRYPTO_get_locking_callback();
-	fns.lock_fns.lock_add_lock_cb = CRYPTO_get_add_lock_callback();
-	fns.lock_fns.dynlock_create_cb = CRYPTO_get_dynlock_create_callback();
-	fns.lock_fns.dynlock_lock_cb = CRYPTO_get_dynlock_lock_callback();
-	fns.lock_fns.dynlock_destroy_cb = CRYPTO_get_dynlock_destroy_callback();
-	/* Now that we've loaded the dynamic engine, make sure no "dynamic"
-	 * ENGINE elements will show through. */
-	engine_set_all_null(e);
-
-	/* Try to bind the ENGINE onto our own ENGINE structure */
-	if(!ctx->bind_engine(e, ctx->engine_id, &fns))
-		{
-		ctx->bind_engine = NULL;
-		ctx->v_check = NULL;
-		DSO_free(ctx->dynamic_dso);
-		ctx->dynamic_dso = NULL;
-		ENGINEerr(ENGINE_F_DYNAMIC_LOAD,ENGINE_R_INIT_FAILED);
-		/* Copy the original ENGINE structure back */
-		memcpy(e, &cpy, sizeof(ENGINE));
-		return 0;
-		}
-	/* Do we try to add this ENGINE to the internal list too? */
-	if(ctx->list_add_value > 0)
-		{
-		if(!ENGINE_add(e))
-			{
-			/* Do we tolerate this or fail? */
-			if(ctx->list_add_value > 1)
-				{
-				/* Fail - NB: By this time, it's too late to
-				 * rollback, and trying to do so allows the
-				 * bind_engine() code to have created leaks. We
-				 * just have to fail where we are, after the
-				 * ENGINE has changed. */
-				ENGINEerr(ENGINE_F_DYNAMIC_LOAD,
-					ENGINE_R_CONFLICTING_ENGINE_ID);
-				return 0;
-				}
-			/* Tolerate */
-			ERR_clear_error();
-			}
-		}
-	return 1;
-	}
diff --git a/crypto/openssl/crypto/engine/eng_err.c b/crypto/openssl/crypto/engine/eng_err.c
deleted file mode 100644
index 369f2e22d3bc..000000000000
--- a/crypto/openssl/crypto/engine/eng_err.c
+++ /dev/null
@@ -1,168 +0,0 @@
-/* crypto/engine/eng_err.c */
-/* ====================================================================
- * Copyright (c) 1999-2005 The OpenSSL Project.  All rights reserved.
- *
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions
- * are met:
- *
- * 1. Redistributions of source code must retain the above copyright
- *    notice, this list of conditions and the following disclaimer. 
- *
- * 2. Redistributions in binary form must reproduce the above copyright
- *    notice, this list of conditions and the following disclaimer in
- *    the documentation and/or other materials provided with the
- *    distribution.
- *
- * 3. All advertising materials mentioning features or use of this
- *    software must display the following acknowledgment:
- *    "This product includes software developed by the OpenSSL Project
- *    for use in the OpenSSL Toolkit. (http://www.OpenSSL.org/)"
- *
- * 4. The names "OpenSSL Toolkit" and "OpenSSL Project" must not be used to
- *    endorse or promote products derived from this software without
- *    prior written permission. For written permission, please contact
- *    openssl-core@OpenSSL.org.
- *
- * 5. Products derived from this software may not be called "OpenSSL"
- *    nor may "OpenSSL" appear in their names without prior written
- *    permission of the OpenSSL Project.
- *
- * 6. Redistributions of any form whatsoever must retain the following
- *    acknowledgment:
- *    "This product includes software developed by the OpenSSL Project
- *    for use in the OpenSSL Toolkit (http://www.OpenSSL.org/)"
- *
- * THIS SOFTWARE IS PROVIDED BY THE OpenSSL PROJECT ``AS IS'' AND ANY
- * EXPRESSED OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
- * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR
- * PURPOSE ARE DISCLAIMED.  IN NO EVENT SHALL THE OpenSSL PROJECT OR
- * ITS CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
- * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
- * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
- * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
- * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
- * STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
- * ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED
- * OF THE POSSIBILITY OF SUCH DAMAGE.
- * ====================================================================
- *
- * This product includes cryptographic software written by Eric Young
- * (eay@cryptsoft.com).  This product includes software written by Tim
- * Hudson (tjh@cryptsoft.com).
- *
- */
-
-/* NOTE: this file was auto generated by the mkerr.pl script: any changes
- * made to it will be overwritten when the script next updates this file,
- * only reason strings will be preserved.
- */
-
-#include <stdio.h>
-#include <openssl/err.h>
-#include <openssl/engine.h>
-
-/* BEGIN ERROR CODES */
-#ifndef OPENSSL_NO_ERR
-
-#define ERR_FUNC(func) ERR_PACK(ERR_LIB_ENGINE,func,0)
-#define ERR_REASON(reason) ERR_PACK(ERR_LIB_ENGINE,0,reason)
-
-static ERR_STRING_DATA ENGINE_str_functs[]=
-	{
-{ERR_FUNC(ENGINE_F_DYNAMIC_CTRL),	"DYNAMIC_CTRL"},
-{ERR_FUNC(ENGINE_F_DYNAMIC_GET_DATA_CTX),	"DYNAMIC_GET_DATA_CTX"},
-{ERR_FUNC(ENGINE_F_DYNAMIC_LOAD),	"DYNAMIC_LOAD"},
-{ERR_FUNC(ENGINE_F_DYNAMIC_SET_DATA_CTX),	"DYNAMIC_SET_DATA_CTX"},
-{ERR_FUNC(ENGINE_F_ENGINE_ADD),	"ENGINE_add"},
-{ERR_FUNC(ENGINE_F_ENGINE_BY_ID),	"ENGINE_by_id"},
-{ERR_FUNC(ENGINE_F_ENGINE_CMD_IS_EXECUTABLE),	"ENGINE_cmd_is_executable"},
-{ERR_FUNC(ENGINE_F_ENGINE_CTRL),	"ENGINE_ctrl"},
-{ERR_FUNC(ENGINE_F_ENGINE_CTRL_CMD),	"ENGINE_ctrl_cmd"},
-{ERR_FUNC(ENGINE_F_ENGINE_CTRL_CMD_STRING),	"ENGINE_ctrl_cmd_string"},
-{ERR_FUNC(ENGINE_F_ENGINE_FINISH),	"ENGINE_finish"},
-{ERR_FUNC(ENGINE_F_ENGINE_FREE_UTIL),	"ENGINE_FREE_UTIL"},
-{ERR_FUNC(ENGINE_F_ENGINE_GET_CIPHER),	"ENGINE_get_cipher"},
-{ERR_FUNC(ENGINE_F_ENGINE_GET_DEFAULT_TYPE),	"ENGINE_GET_DEFAULT_TYPE"},
-{ERR_FUNC(ENGINE_F_ENGINE_GET_DIGEST),	"ENGINE_get_digest"},
-{ERR_FUNC(ENGINE_F_ENGINE_GET_NEXT),	"ENGINE_get_next"},
-{ERR_FUNC(ENGINE_F_ENGINE_GET_PREV),	"ENGINE_get_prev"},
-{ERR_FUNC(ENGINE_F_ENGINE_INIT),	"ENGINE_init"},
-{ERR_FUNC(ENGINE_F_ENGINE_LIST_ADD),	"ENGINE_LIST_ADD"},
-{ERR_FUNC(ENGINE_F_ENGINE_LIST_REMOVE),	"ENGINE_LIST_REMOVE"},
-{ERR_FUNC(ENGINE_F_ENGINE_LOAD_PRIVATE_KEY),	"ENGINE_load_private_key"},
-{ERR_FUNC(ENGINE_F_ENGINE_LOAD_PUBLIC_KEY),	"ENGINE_load_public_key"},
-{ERR_FUNC(ENGINE_F_ENGINE_NEW),	"ENGINE_new"},
-{ERR_FUNC(ENGINE_F_ENGINE_REMOVE),	"ENGINE_remove"},
-{ERR_FUNC(ENGINE_F_ENGINE_SET_DEFAULT_STRING),	"ENGINE_set_default_string"},
-{ERR_FUNC(ENGINE_F_ENGINE_SET_DEFAULT_TYPE),	"ENGINE_SET_DEFAULT_TYPE"},
-{ERR_FUNC(ENGINE_F_ENGINE_SET_ID),	"ENGINE_set_id"},
-{ERR_FUNC(ENGINE_F_ENGINE_SET_NAME),	"ENGINE_set_name"},
-{ERR_FUNC(ENGINE_F_ENGINE_TABLE_REGISTER),	"ENGINE_TABLE_REGISTER"},
-{ERR_FUNC(ENGINE_F_ENGINE_UNLOAD_KEY),	"ENGINE_UNLOAD_KEY"},
-{ERR_FUNC(ENGINE_F_ENGINE_UNLOCKED_FINISH),	"ENGINE_UNLOCKED_FINISH"},
-{ERR_FUNC(ENGINE_F_ENGINE_UP_REF),	"ENGINE_up_ref"},
-{ERR_FUNC(ENGINE_F_INT_CTRL_HELPER),	"INT_CTRL_HELPER"},
-{ERR_FUNC(ENGINE_F_INT_ENGINE_CONFIGURE),	"INT_ENGINE_CONFIGURE"},
-{ERR_FUNC(ENGINE_F_INT_ENGINE_MODULE_INIT),	"INT_ENGINE_MODULE_INIT"},
-{ERR_FUNC(ENGINE_F_LOG_MESSAGE),	"LOG_MESSAGE"},
-{0,NULL}
-	};
-
-static ERR_STRING_DATA ENGINE_str_reasons[]=
-	{
-{ERR_REASON(ENGINE_R_ALREADY_LOADED)     ,"already loaded"},
-{ERR_REASON(ENGINE_R_ARGUMENT_IS_NOT_A_NUMBER),"argument is not a number"},
-{ERR_REASON(ENGINE_R_CMD_NOT_EXECUTABLE) ,"cmd not executable"},
-{ERR_REASON(ENGINE_R_COMMAND_TAKES_INPUT),"command takes input"},
-{ERR_REASON(ENGINE_R_COMMAND_TAKES_NO_INPUT),"command takes no input"},
-{ERR_REASON(ENGINE_R_CONFLICTING_ENGINE_ID),"conflicting engine id"},
-{ERR_REASON(ENGINE_R_CTRL_COMMAND_NOT_IMPLEMENTED),"ctrl command not implemented"},
-{ERR_REASON(ENGINE_R_DH_NOT_IMPLEMENTED) ,"dh not implemented"},
-{ERR_REASON(ENGINE_R_DSA_NOT_IMPLEMENTED),"dsa not implemented"},
-{ERR_REASON(ENGINE_R_DSO_FAILURE)        ,"DSO failure"},
-{ERR_REASON(ENGINE_R_DSO_NOT_FOUND)      ,"dso not found"},
-{ERR_REASON(ENGINE_R_ENGINES_SECTION_ERROR),"engines section error"},
-{ERR_REASON(ENGINE_R_ENGINE_IS_NOT_IN_LIST),"engine is not in the list"},
-{ERR_REASON(ENGINE_R_ENGINE_SECTION_ERROR),"engine section error"},
-{ERR_REASON(ENGINE_R_FAILED_LOADING_PRIVATE_KEY),"failed loading private key"},
-{ERR_REASON(ENGINE_R_FAILED_LOADING_PUBLIC_KEY),"failed loading public key"},
-{ERR_REASON(ENGINE_R_FINISH_FAILED)      ,"finish failed"},
-{ERR_REASON(ENGINE_R_GET_HANDLE_FAILED)  ,"could not obtain hardware handle"},
-{ERR_REASON(ENGINE_R_ID_OR_NAME_MISSING) ,"'id' or 'name' missing"},
-{ERR_REASON(ENGINE_R_INIT_FAILED)        ,"init failed"},
-{ERR_REASON(ENGINE_R_INTERNAL_LIST_ERROR),"internal list error"},
-{ERR_REASON(ENGINE_R_INVALID_ARGUMENT)   ,"invalid argument"},
-{ERR_REASON(ENGINE_R_INVALID_CMD_NAME)   ,"invalid cmd name"},
-{ERR_REASON(ENGINE_R_INVALID_CMD_NUMBER) ,"invalid cmd number"},
-{ERR_REASON(ENGINE_R_INVALID_INIT_VALUE) ,"invalid init value"},
-{ERR_REASON(ENGINE_R_INVALID_STRING)     ,"invalid string"},
-{ERR_REASON(ENGINE_R_NOT_INITIALISED)    ,"not initialised"},
-{ERR_REASON(ENGINE_R_NOT_LOADED)         ,"not loaded"},
-{ERR_REASON(ENGINE_R_NO_CONTROL_FUNCTION),"no control function"},
-{ERR_REASON(ENGINE_R_NO_INDEX)           ,"no index"},
-{ERR_REASON(ENGINE_R_NO_LOAD_FUNCTION)   ,"no load function"},
-{ERR_REASON(ENGINE_R_NO_REFERENCE)       ,"no reference"},
-{ERR_REASON(ENGINE_R_NO_SUCH_ENGINE)     ,"no such engine"},
-{ERR_REASON(ENGINE_R_NO_UNLOAD_FUNCTION) ,"no unload function"},
-{ERR_REASON(ENGINE_R_PROVIDE_PARAMETERS) ,"provide parameters"},
-{ERR_REASON(ENGINE_R_RSA_NOT_IMPLEMENTED),"rsa not implemented"},
-{ERR_REASON(ENGINE_R_UNIMPLEMENTED_CIPHER),"unimplemented cipher"},
-{ERR_REASON(ENGINE_R_UNIMPLEMENTED_DIGEST),"unimplemented digest"},
-{ERR_REASON(ENGINE_R_VERSION_INCOMPATIBILITY),"version incompatibility"},
-{0,NULL}
-	};
-
-#endif
-
-void ERR_load_ENGINE_strings(void)
-	{
-#ifndef OPENSSL_NO_ERR
-
-	if (ERR_func_error_string(ENGINE_str_functs[0].error) == NULL)
-		{
-		ERR_load_strings(0,ENGINE_str_functs);
-		ERR_load_strings(0,ENGINE_str_reasons);
-		}
-#endif
-	}
diff --git a/crypto/openssl/crypto/engine/eng_fat.c b/crypto/openssl/crypto/engine/eng_fat.c
deleted file mode 100644
index 27c1662f6254..000000000000
--- a/crypto/openssl/crypto/engine/eng_fat.c
+++ /dev/null
@@ -1,167 +0,0 @@
-/* crypto/engine/eng_fat.c */
-/* ====================================================================
- * Copyright (c) 1999-2001 The OpenSSL Project.  All rights reserved.
- *
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions
- * are met:
- *
- * 1. Redistributions of source code must retain the above copyright
- *    notice, this list of conditions and the following disclaimer. 
- *
- * 2. Redistributions in binary form must reproduce the above copyright
- *    notice, this list of conditions and the following disclaimer in
- *    the documentation and/or other materials provided with the
- *    distribution.
- *
- * 3. All advertising materials mentioning features or use of this
- *    software must display the following acknowledgment:
- *    "This product includes software developed by the OpenSSL Project
- *    for use in the OpenSSL Toolkit. (http://www.OpenSSL.org/)"
- *
- * 4. The names "OpenSSL Toolkit" and "OpenSSL Project" must not be used to
- *    endorse or promote products derived from this software without
- *    prior written permission. For written permission, please contact
- *    licensing@OpenSSL.org.
- *
- * 5. Products derived from this software may not be called "OpenSSL"
- *    nor may "OpenSSL" appear in their names without prior written
- *    permission of the OpenSSL Project.
- *
- * 6. Redistributions of any form whatsoever must retain the following
- *    acknowledgment:
- *    "This product includes software developed by the OpenSSL Project
- *    for use in the OpenSSL Toolkit (http://www.OpenSSL.org/)"
- *
- * THIS SOFTWARE IS PROVIDED BY THE OpenSSL PROJECT ``AS IS'' AND ANY
- * EXPRESSED OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
- * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR
- * PURPOSE ARE DISCLAIMED.  IN NO EVENT SHALL THE OpenSSL PROJECT OR
- * ITS CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
- * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
- * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
- * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
- * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
- * STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
- * ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED
- * OF THE POSSIBILITY OF SUCH DAMAGE.
- * ====================================================================
- *
- * This product includes cryptographic software written by Eric Young
- * (eay@cryptsoft.com).  This product includes software written by Tim
- * Hudson (tjh@cryptsoft.com).
- *
- */
-/* ====================================================================
- * Copyright 2002 Sun Microsystems, Inc. ALL RIGHTS RESERVED.
- * ECDH support in OpenSSL originally developed by 
- * SUN MICROSYSTEMS, INC., and contributed to the OpenSSL project.
- */
-
-#include "eng_int.h"
-#include <openssl/conf.h>
-
-int ENGINE_set_default(ENGINE *e, unsigned int flags)
-	{
-	if((flags & ENGINE_METHOD_CIPHERS) && !ENGINE_set_default_ciphers(e))
-		return 0;
-	if((flags & ENGINE_METHOD_DIGESTS) && !ENGINE_set_default_digests(e))
-		return 0;
-#ifndef OPENSSL_NO_RSA
-	if((flags & ENGINE_METHOD_RSA) && !ENGINE_set_default_RSA(e))
-		return 0;
-#endif
-#ifndef OPENSSL_NO_DSA
-	if((flags & ENGINE_METHOD_DSA) && !ENGINE_set_default_DSA(e))
-		return 0;
-#endif
-#ifndef OPENSSL_NO_DH
-	if((flags & ENGINE_METHOD_DH) && !ENGINE_set_default_DH(e))
-		return 0;
-#endif
-#ifndef OPENSSL_NO_ECDH
-	if((flags & ENGINE_METHOD_ECDH) && !ENGINE_set_default_ECDH(e))
-		return 0;
-#endif
-#ifndef OPENSSL_NO_ECDSA
-	if((flags & ENGINE_METHOD_ECDSA) && !ENGINE_set_default_ECDSA(e))
-		return 0;
-#endif
-	if((flags & ENGINE_METHOD_RAND) && !ENGINE_set_default_RAND(e))
-		return 0;
-	return 1;
-	}
-
-/* Set default algorithms using a string */
-
-static int int_def_cb(const char *alg, int len, void *arg)
-	{
-	unsigned int *pflags = arg;
-	if (!strncmp(alg, "ALL", len))
-		*pflags |= ENGINE_METHOD_ALL;
-	else if (!strncmp(alg, "RSA", len))
-		*pflags |= ENGINE_METHOD_RSA;
-	else if (!strncmp(alg, "DSA", len))
-		*pflags |= ENGINE_METHOD_DSA;
-	else if (!strncmp(alg, "ECDH", len))
-		*pflags |= ENGINE_METHOD_ECDH;
-	else if (!strncmp(alg, "ECDSA", len))
-		*pflags |= ENGINE_METHOD_ECDSA;
-	else if (!strncmp(alg, "DH", len))
-		*pflags |= ENGINE_METHOD_DH;
-	else if (!strncmp(alg, "RAND", len))
-		*pflags |= ENGINE_METHOD_RAND;
-	else if (!strncmp(alg, "CIPHERS", len))
-		*pflags |= ENGINE_METHOD_CIPHERS;
-	else if (!strncmp(alg, "DIGESTS", len))
-		*pflags |= ENGINE_METHOD_DIGESTS;
-	else
-		return 0;
-	return 1;
-	}
-
-
-int ENGINE_set_default_string(ENGINE *e, const char *def_list)
-	{
-	unsigned int flags = 0;
-	if (!CONF_parse_list(def_list, ',', 1, int_def_cb, &flags))
-		{
-		ENGINEerr(ENGINE_F_ENGINE_SET_DEFAULT_STRING,
-					ENGINE_R_INVALID_STRING);
-		ERR_add_error_data(2, "str=",def_list);
-		return 0;
-		}
-	return ENGINE_set_default(e, flags);
-	}
-
-int ENGINE_register_complete(ENGINE *e)
-	{
-	ENGINE_register_ciphers(e);
-	ENGINE_register_digests(e);
-#ifndef OPENSSL_NO_RSA
-	ENGINE_register_RSA(e);
-#endif
-#ifndef OPENSSL_NO_DSA
-	ENGINE_register_DSA(e);
-#endif
-#ifndef OPENSSL_NO_DH
-	ENGINE_register_DH(e);
-#endif
-#ifndef OPENSSL_NO_ECDH
-	ENGINE_register_ECDH(e);
-#endif
-#ifndef OPENSSL_NO_ECDSA
-	ENGINE_register_ECDSA(e);
-#endif
-	ENGINE_register_RAND(e);
-	return 1;
-	}
-
-int ENGINE_register_all_complete(void)
-	{
-	ENGINE *e;
-
-	for(e=ENGINE_get_first() ; e ; e=ENGINE_get_next(e))
-		ENGINE_register_complete(e);
-	return 1;
-	}
diff --git a/crypto/openssl/crypto/engine/eng_init.c b/crypto/openssl/crypto/engine/eng_init.c
deleted file mode 100644
index 7633cf5f1d09..000000000000
--- a/crypto/openssl/crypto/engine/eng_init.c
+++ /dev/null
@@ -1,154 +0,0 @@
-/* crypto/engine/eng_init.c */
-/* ====================================================================
- * Copyright (c) 1999-2001 The OpenSSL Project.  All rights reserved.
- *
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions
- * are met:
- *
- * 1. Redistributions of source code must retain the above copyright
- *    notice, this list of conditions and the following disclaimer. 
- *
- * 2. Redistributions in binary form must reproduce the above copyright
- *    notice, this list of conditions and the following disclaimer in
- *    the documentation and/or other materials provided with the
- *    distribution.
- *
- * 3. All advertising materials mentioning features or use of this
- *    software must display the following acknowledgment:
- *    "This product includes software developed by the OpenSSL Project
- *    for use in the OpenSSL Toolkit. (http://www.OpenSSL.org/)"
- *
- * 4. The names "OpenSSL Toolkit" and "OpenSSL Project" must not be used to
- *    endorse or promote products derived from this software without
- *    prior written permission. For written permission, please contact
- *    licensing@OpenSSL.org.
- *
- * 5. Products derived from this software may not be called "OpenSSL"
- *    nor may "OpenSSL" appear in their names without prior written
- *    permission of the OpenSSL Project.
- *
- * 6. Redistributions of any form whatsoever must retain the following
- *    acknowledgment:
- *    "This product includes software developed by the OpenSSL Project
- *    for use in the OpenSSL Toolkit (http://www.OpenSSL.org/)"
- *
- * THIS SOFTWARE IS PROVIDED BY THE OpenSSL PROJECT ``AS IS'' AND ANY
- * EXPRESSED OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
- * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR
- * PURPOSE ARE DISCLAIMED.  IN NO EVENT SHALL THE OpenSSL PROJECT OR
- * ITS CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
- * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
- * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
- * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
- * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
- * STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
- * ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED
- * OF THE POSSIBILITY OF SUCH DAMAGE.
- * ====================================================================
- *
- * This product includes cryptographic software written by Eric Young
- * (eay@cryptsoft.com).  This product includes software written by Tim
- * Hudson (tjh@cryptsoft.com).
- *
- */
-
-#include "eng_int.h"
-
-/* Initialise a engine type for use (or up its functional reference count
- * if it's already in use). This version is only used internally. */
-int engine_unlocked_init(ENGINE *e)
-	{
-	int to_return = 1;
-
-	if((e->funct_ref == 0) && e->init)
-		/* This is the first functional reference and the engine
-		 * requires initialisation so we do it now. */
-		to_return = e->init(e);
-	if(to_return)
-		{
-		/* OK, we return a functional reference which is also a
-		 * structural reference. */
-		e->struct_ref++;
-		e->funct_ref++;
-		engine_ref_debug(e, 0, 1)
-		engine_ref_debug(e, 1, 1)
-		}
-	return to_return;
-	}
-
-/* Free a functional reference to a engine type. This version is only used
- * internally. */
-int engine_unlocked_finish(ENGINE *e, int unlock_for_handlers)
-	{
-	int to_return = 1;
-
-	/* Reduce the functional reference count here so if it's the terminating
-	 * case, we can release the lock safely and call the finish() handler
-	 * without risk of a race. We get a race if we leave the count until
-	 * after and something else is calling "finish" at the same time -
-	 * there's a chance that both threads will together take the count from
-	 * 2 to 0 without either calling finish(). */
-	e->funct_ref--;
-	engine_ref_debug(e, 1, -1);
-	if((e->funct_ref == 0) && e->finish)
-		{
-		if(unlock_for_handlers)
-			CRYPTO_w_unlock(CRYPTO_LOCK_ENGINE);
-		to_return = e->finish(e);
-		if(unlock_for_handlers)
-			CRYPTO_w_lock(CRYPTO_LOCK_ENGINE);
-		if(!to_return)
-			return 0;
-		}
-#ifdef REF_CHECK
-	if(e->funct_ref < 0)
-		{
-		fprintf(stderr,"ENGINE_finish, bad functional reference count\n");
-		abort();
-		}
-#endif
-	/* Release the structural reference too */
-	if(!engine_free_util(e, 0))
-		{
-		ENGINEerr(ENGINE_F_ENGINE_UNLOCKED_FINISH,ENGINE_R_FINISH_FAILED);
-		return 0;
-		}
-	return to_return;
-	}
-
-/* The API (locked) version of "init" */
-int ENGINE_init(ENGINE *e)
-	{
-	int ret;
-	if(e == NULL)
-		{
-		ENGINEerr(ENGINE_F_ENGINE_INIT,ERR_R_PASSED_NULL_PARAMETER);
-		return 0;
-		}
-	CRYPTO_w_lock(CRYPTO_LOCK_ENGINE);
-	ret = engine_unlocked_init(e);
-	CRYPTO_w_unlock(CRYPTO_LOCK_ENGINE);
-	return ret;
-	}
-
-/* The API (locked) version of "finish" */
-int ENGINE_finish(ENGINE *e)
-	{
-	int to_return = 1;
-
-	if(e == NULL)
-		{
-		ENGINEerr(ENGINE_F_ENGINE_FINISH,ERR_R_PASSED_NULL_PARAMETER);
-		return 0;
-		}
-	CRYPTO_w_lock(CRYPTO_LOCK_ENGINE);
-	to_return = engine_unlocked_finish(e, 1);
-	CRYPTO_w_unlock(CRYPTO_LOCK_ENGINE);
-	if(!to_return)
-		{
-		ENGINEerr(ENGINE_F_ENGINE_FINISH,ENGINE_R_FINISH_FAILED);
-		return 0;
-		}
-	return to_return;
-	}
diff --git a/crypto/openssl/crypto/engine/eng_int.h b/crypto/openssl/crypto/engine/eng_int.h
deleted file mode 100644
index a5b1edebf4b9..000000000000
--- a/crypto/openssl/crypto/engine/eng_int.h
+++ /dev/null
@@ -1,194 +0,0 @@
-/* crypto/engine/eng_int.h */
-/* Written by Geoff Thorpe (geoff@geoffthorpe.net) for the OpenSSL
- * project 2000.
- */
-/* ====================================================================
- * Copyright (c) 1999-2001 The OpenSSL Project.  All rights reserved.
- *
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions
- * are met:
- *
- * 1. Redistributions of source code must retain the above copyright
- *    notice, this list of conditions and the following disclaimer. 
- *
- * 2. Redistributions in binary form must reproduce the above copyright
- *    notice, this list of conditions and the following disclaimer in
- *    the documentation and/or other materials provided with the
- *    distribution.
- *
- * 3. All advertising materials mentioning features or use of this
- *    software must display the following acknowledgment:
- *    "This product includes software developed by the OpenSSL Project
- *    for use in the OpenSSL Toolkit. (http://www.OpenSSL.org/)"
- *
- * 4. The names "OpenSSL Toolkit" and "OpenSSL Project" must not be used to
- *    endorse or promote products derived from this software without
- *    prior written permission. For written permission, please contact
- *    licensing@OpenSSL.org.
- *
- * 5. Products derived from this software may not be called "OpenSSL"
- *    nor may "OpenSSL" appear in their names without prior written
- *    permission of the OpenSSL Project.
- *
- * 6. Redistributions of any form whatsoever must retain the following
- *    acknowledgment:
- *    "This product includes software developed by the OpenSSL Project
- *    for use in the OpenSSL Toolkit (http://www.OpenSSL.org/)"
- *
- * THIS SOFTWARE IS PROVIDED BY THE OpenSSL PROJECT ``AS IS'' AND ANY
- * EXPRESSED OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
- * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR
- * PURPOSE ARE DISCLAIMED.  IN NO EVENT SHALL THE OpenSSL PROJECT OR
- * ITS CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
- * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
- * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
- * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
- * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
- * STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
- * ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED
- * OF THE POSSIBILITY OF SUCH DAMAGE.
- * ====================================================================
- *
- * This product includes cryptographic software written by Eric Young
- * (eay@cryptsoft.com).  This product includes software written by Tim
- * Hudson (tjh@cryptsoft.com).
- *
- */
-/* ====================================================================
- * Copyright 2002 Sun Microsystems, Inc. ALL RIGHTS RESERVED.
- * ECDH support in OpenSSL originally developed by 
- * SUN MICROSYSTEMS, INC., and contributed to the OpenSSL project.
- */
-
-#ifndef HEADER_ENGINE_INT_H
-#define HEADER_ENGINE_INT_H
-
-#include "cryptlib.h"
-/* Take public definitions from engine.h */
-#include <openssl/engine.h>
-
-#ifdef  __cplusplus
-extern "C" {
-#endif
-
-/* If we compile with this symbol defined, then both reference counts in the
- * ENGINE structure will be monitored with a line of output on stderr for each
- * change. This prints the engine's pointer address (truncated to unsigned int),
- * "struct" or "funct" to indicate the reference type, the before and after
- * reference count, and the file:line-number pair. The "engine_ref_debug"
- * statements must come *after* the change. */
-#ifdef ENGINE_REF_COUNT_DEBUG
-
-#define engine_ref_debug(e, isfunct, diff) \
-	fprintf(stderr, "engine: %08x %s from %d to %d (%s:%d)\n", \
-		(unsigned int)(e), (isfunct ? "funct" : "struct"), \
-		((isfunct) ? ((e)->funct_ref - (diff)) : ((e)->struct_ref - (diff))), \
-		((isfunct) ? (e)->funct_ref : (e)->struct_ref), \
-		(__FILE__), (__LINE__));
-
-#else
-
-#define engine_ref_debug(e, isfunct, diff)
-
-#endif
-
-/* Any code that will need cleanup operations should use these functions to
- * register callbacks. ENGINE_cleanup() will call all registered callbacks in
- * order. NB: both the "add" functions assume CRYPTO_LOCK_ENGINE to already be
- * held (in "write" mode). */
-typedef void (ENGINE_CLEANUP_CB)(void);
-typedef struct st_engine_cleanup_item
-	{
-	ENGINE_CLEANUP_CB *cb;
-	} ENGINE_CLEANUP_ITEM;
-DECLARE_STACK_OF(ENGINE_CLEANUP_ITEM)
-void engine_cleanup_add_first(ENGINE_CLEANUP_CB *cb);
-void engine_cleanup_add_last(ENGINE_CLEANUP_CB *cb);
-
-/* We need stacks of ENGINEs for use in eng_table.c */
-DECLARE_STACK_OF(ENGINE)
-
-/* If this symbol is defined then engine_table_select(), the function that is
- * used by RSA, DSA (etc) code to select registered ENGINEs, cache defaults and
- * functional references (etc), will display debugging summaries to stderr. */
-/* #define ENGINE_TABLE_DEBUG */
-
-/* This represents an implementation table. Dependent code should instantiate it
- * as a (ENGINE_TABLE *) pointer value set initially to NULL. */
-typedef struct st_engine_table ENGINE_TABLE;
-int engine_table_register(ENGINE_TABLE **table, ENGINE_CLEANUP_CB *cleanup,
-		ENGINE *e, const int *nids, int num_nids, int setdefault);
-void engine_table_unregister(ENGINE_TABLE **table, ENGINE *e);
-void engine_table_cleanup(ENGINE_TABLE **table);
-#ifndef ENGINE_TABLE_DEBUG
-ENGINE *engine_table_select(ENGINE_TABLE **table, int nid);
-#else
-ENGINE *engine_table_select_tmp(ENGINE_TABLE **table, int nid, const char *f, int l);
-#define engine_table_select(t,n) engine_table_select_tmp(t,n,__FILE__,__LINE__)
-#endif
-
-/* Internal versions of API functions that have control over locking. These are
- * used between C files when functionality needs to be shared but the caller may
- * already be controlling of the CRYPTO_LOCK_ENGINE lock. */
-int engine_unlocked_init(ENGINE *e);
-int engine_unlocked_finish(ENGINE *e, int unlock_for_handlers);
-int engine_free_util(ENGINE *e, int locked);
-
-/* This function will reset all "set"able values in an ENGINE to NULL. This
- * won't touch reference counts or ex_data, but is equivalent to calling all the
- * ENGINE_set_***() functions with a NULL value. */
-void engine_set_all_null(ENGINE *e);
-
-/* NB: Bitwise OR-able values for the "flags" variable in ENGINE are now exposed
- * in engine.h. */
-
-/* This is a structure for storing implementations of various crypto
- * algorithms and functions. */
-struct engine_st
-	{
-	const char *id;
-	const char *name;
-	const RSA_METHOD *rsa_meth;
-	const DSA_METHOD *dsa_meth;
-	const DH_METHOD *dh_meth;
-	const ECDH_METHOD *ecdh_meth;
-	const ECDSA_METHOD *ecdsa_meth;
-	const RAND_METHOD *rand_meth;
-	const STORE_METHOD *store_meth;
-	/* Cipher handling is via this callback */
-	ENGINE_CIPHERS_PTR ciphers;
-	/* Digest handling is via this callback */
-	ENGINE_DIGESTS_PTR digests;
-
-
-	ENGINE_GEN_INT_FUNC_PTR	destroy;
-
-	ENGINE_GEN_INT_FUNC_PTR init;
-	ENGINE_GEN_INT_FUNC_PTR finish;
-	ENGINE_CTRL_FUNC_PTR ctrl;
-	ENGINE_LOAD_KEY_PTR load_privkey;
-	ENGINE_LOAD_KEY_PTR load_pubkey;
-
-	const ENGINE_CMD_DEFN *cmd_defns;
-	int flags;
-	/* reference count on the structure itself */
-	int struct_ref;
-	/* reference count on usability of the engine type. NB: This
-	 * controls the loading and initialisation of any functionlity
-	 * required by this engine, whereas the previous count is
-	 * simply to cope with (de)allocation of this structure. Hence,
-	 * running_ref <= struct_ref at all times. */
-	int funct_ref;
-	/* A place to store per-ENGINE data */
-	CRYPTO_EX_DATA ex_data;
-	/* Used to maintain the linked-list of engines. */
-	struct engine_st *prev;
-	struct engine_st *next;
-	};
-
-#ifdef  __cplusplus
-}
-#endif
-
-#endif /* HEADER_ENGINE_INT_H */
diff --git a/crypto/openssl/crypto/engine/eng_lib.c b/crypto/openssl/crypto/engine/eng_lib.c
deleted file mode 100644
index 5815b867f493..000000000000
--- a/crypto/openssl/crypto/engine/eng_lib.c
+++ /dev/null
@@ -1,329 +0,0 @@
-/* crypto/engine/eng_lib.c */
-/* Written by Geoff Thorpe (geoff@geoffthorpe.net) for the OpenSSL
- * project 2000.
- */
-/* ====================================================================
- * Copyright (c) 1999-2001 The OpenSSL Project.  All rights reserved.
- *
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions
- * are met:
- *
- * 1. Redistributions of source code must retain the above copyright
- *    notice, this list of conditions and the following disclaimer. 
- *
- * 2. Redistributions in binary form must reproduce the above copyright
- *    notice, this list of conditions and the following disclaimer in
- *    the documentation and/or other materials provided with the
- *    distribution.
- *
- * 3. All advertising materials mentioning features or use of this
- *    software must display the following acknowledgment:
- *    "This product includes software developed by the OpenSSL Project
- *    for use in the OpenSSL Toolkit. (http://www.OpenSSL.org/)"
- *
- * 4. The names "OpenSSL Toolkit" and "OpenSSL Project" must not be used to
- *    endorse or promote products derived from this software without
- *    prior written permission. For written permission, please contact
- *    licensing@OpenSSL.org.
- *
- * 5. Products derived from this software may not be called "OpenSSL"
- *    nor may "OpenSSL" appear in their names without prior written
- *    permission of the OpenSSL Project.
- *
- * 6. Redistributions of any form whatsoever must retain the following
- *    acknowledgment:
- *    "This product includes software developed by the OpenSSL Project
- *    for use in the OpenSSL Toolkit (http://www.OpenSSL.org/)"
- *
- * THIS SOFTWARE IS PROVIDED BY THE OpenSSL PROJECT ``AS IS'' AND ANY
- * EXPRESSED OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
- * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR
- * PURPOSE ARE DISCLAIMED.  IN NO EVENT SHALL THE OpenSSL PROJECT OR
- * ITS CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
- * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
- * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
- * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
- * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
- * STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
- * ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED
- * OF THE POSSIBILITY OF SUCH DAMAGE.
- * ====================================================================
- *
- * This product includes cryptographic software written by Eric Young
- * (eay@cryptsoft.com).  This product includes software written by Tim
- * Hudson (tjh@cryptsoft.com).
- *
- */
-
-#include "eng_int.h"
-#include <openssl/rand.h>
-
-/* The "new"/"free" stuff first */
-
-ENGINE *ENGINE_new(void)
-	{
-	ENGINE *ret;
-
-	ret = (ENGINE *)OPENSSL_malloc(sizeof(ENGINE));
-	if(ret == NULL)
-		{
-		ENGINEerr(ENGINE_F_ENGINE_NEW, ERR_R_MALLOC_FAILURE);
-		return NULL;
-		}
-	memset(ret, 0, sizeof(ENGINE));
-	ret->struct_ref = 1;
-	engine_ref_debug(ret, 0, 1)
-	CRYPTO_new_ex_data(CRYPTO_EX_INDEX_ENGINE, ret, &ret->ex_data);
-	return ret;
-	}
-
-/* Placed here (close proximity to ENGINE_new) so that modifications to the
- * elements of the ENGINE structure are more likely to be caught and changed
- * here. */
-void engine_set_all_null(ENGINE *e)
-	{
-	e->id = NULL;
-	e->name = NULL;
-	e->rsa_meth = NULL;
-	e->dsa_meth = NULL;
-	e->dh_meth = NULL;
-	e->rand_meth = NULL;
-	e->store_meth = NULL;
-	e->ciphers = NULL;
-	e->digests = NULL;
-	e->destroy = NULL;
-	e->init = NULL;
-	e->finish = NULL;
-	e->ctrl = NULL;
-	e->load_privkey = NULL;
-	e->load_pubkey = NULL;
-	e->cmd_defns = NULL;
-	e->flags = 0;
-	}
-
-int engine_free_util(ENGINE *e, int locked)
-	{
-	int i;
-
-	if(e == NULL)
-		{
-		ENGINEerr(ENGINE_F_ENGINE_FREE_UTIL,
-			ERR_R_PASSED_NULL_PARAMETER);
-		return 0;
-		}
-	if(locked)
-		i = CRYPTO_add(&e->struct_ref,-1,CRYPTO_LOCK_ENGINE);
-	else
-		i = --e->struct_ref;
-	engine_ref_debug(e, 0, -1)
-	if (i > 0) return 1;
-#ifdef REF_CHECK
-	if (i < 0)
-		{
-		fprintf(stderr,"ENGINE_free, bad structural reference count\n");
-		abort();
-		}
-#endif
-	/* Give the ENGINE a chance to do any structural cleanup corresponding
-	 * to allocation it did in its constructor (eg. unload error strings) */
-	if(e->destroy)
-		e->destroy(e);
-	CRYPTO_free_ex_data(CRYPTO_EX_INDEX_ENGINE, e, &e->ex_data);
-	OPENSSL_free(e);
-	return 1;
-	}
-
-int ENGINE_free(ENGINE *e)
-	{
-	return engine_free_util(e, 1);
-	}
-
-/* Cleanup stuff */
-
-/* ENGINE_cleanup() is coded such that anything that does work that will need
- * cleanup can register a "cleanup" callback here. That way we don't get linker
- * bloat by referring to all *possible* cleanups, but any linker bloat into code
- * "X" will cause X's cleanup function to end up here. */
-static STACK_OF(ENGINE_CLEANUP_ITEM) *cleanup_stack = NULL;
-static int int_cleanup_check(int create)
-	{
-	if(cleanup_stack) return 1;
-	if(!create) return 0;
-	cleanup_stack = sk_ENGINE_CLEANUP_ITEM_new_null();
-	return (cleanup_stack ? 1 : 0);
-	}
-static ENGINE_CLEANUP_ITEM *int_cleanup_item(ENGINE_CLEANUP_CB *cb)
-	{
-	ENGINE_CLEANUP_ITEM *item = OPENSSL_malloc(sizeof(
-					ENGINE_CLEANUP_ITEM));
-	if(!item) return NULL;
-	item->cb = cb;
-	return item;
-	}
-void engine_cleanup_add_first(ENGINE_CLEANUP_CB *cb)
-	{
-	ENGINE_CLEANUP_ITEM *item;
-	if(!int_cleanup_check(1)) return;
-	item = int_cleanup_item(cb);
-	if(item)
-		sk_ENGINE_CLEANUP_ITEM_insert(cleanup_stack, item, 0);
-	}
-void engine_cleanup_add_last(ENGINE_CLEANUP_CB *cb)
-	{
-	ENGINE_CLEANUP_ITEM *item;
-	if(!int_cleanup_check(1)) return;
-	item = int_cleanup_item(cb);
-	if(item)
-		sk_ENGINE_CLEANUP_ITEM_push(cleanup_stack, item);
-	}
-/* The API function that performs all cleanup */
-static void engine_cleanup_cb_free(ENGINE_CLEANUP_ITEM *item)
-	{
-	(*(item->cb))();
-	OPENSSL_free(item);
-	}
-void ENGINE_cleanup(void)
-	{
-	if(int_cleanup_check(0))
-		{
-		sk_ENGINE_CLEANUP_ITEM_pop_free(cleanup_stack,
-			engine_cleanup_cb_free);
-		cleanup_stack = NULL;
-		}
-	/* FIXME: This should be handled (somehow) through RAND, eg. by it
-	 * registering a cleanup callback. */
-	RAND_set_rand_method(NULL);
-	}
-
-/* Now the "ex_data" support */
-
-int ENGINE_get_ex_new_index(long argl, void *argp, CRYPTO_EX_new *new_func,
-		CRYPTO_EX_dup *dup_func, CRYPTO_EX_free *free_func)
-	{
-	return CRYPTO_get_ex_new_index(CRYPTO_EX_INDEX_ENGINE, argl, argp,
-			new_func, dup_func, free_func);
-	}
-
-int ENGINE_set_ex_data(ENGINE *e, int idx, void *arg)
-	{
-	return(CRYPTO_set_ex_data(&e->ex_data, idx, arg));
-	}
-
-void *ENGINE_get_ex_data(const ENGINE *e, int idx)
-	{
-	return(CRYPTO_get_ex_data(&e->ex_data, idx));
-	}
-
-/* Functions to get/set an ENGINE's elements - mainly to avoid exposing the
- * ENGINE structure itself. */
-
-int ENGINE_set_id(ENGINE *e, const char *id)
-	{
-	if(id == NULL)
-		{
-		ENGINEerr(ENGINE_F_ENGINE_SET_ID,
-			ERR_R_PASSED_NULL_PARAMETER);
-		return 0;
-		}
-	e->id = id;
-	return 1;
-	}
-
-int ENGINE_set_name(ENGINE *e, const char *name)
-	{
-	if(name == NULL)
-		{
-		ENGINEerr(ENGINE_F_ENGINE_SET_NAME,
-			ERR_R_PASSED_NULL_PARAMETER);
-		return 0;
-		}
-	e->name = name;
-	return 1;
-	}
-
-int ENGINE_set_destroy_function(ENGINE *e, ENGINE_GEN_INT_FUNC_PTR destroy_f)
-	{
-	e->destroy = destroy_f;
-	return 1;
-	}
-
-int ENGINE_set_init_function(ENGINE *e, ENGINE_GEN_INT_FUNC_PTR init_f)
-	{
-	e->init = init_f;
-	return 1;
-	}
-
-int ENGINE_set_finish_function(ENGINE *e, ENGINE_GEN_INT_FUNC_PTR finish_f)
-	{
-	e->finish = finish_f;
-	return 1;
-	}
-
-int ENGINE_set_ctrl_function(ENGINE *e, ENGINE_CTRL_FUNC_PTR ctrl_f)
-	{
-	e->ctrl = ctrl_f;
-	return 1;
-	}
-
-int ENGINE_set_flags(ENGINE *e, int flags)
-	{
-	e->flags = flags;
-	return 1;
-	}
-
-int ENGINE_set_cmd_defns(ENGINE *e, const ENGINE_CMD_DEFN *defns)
-	{
-	e->cmd_defns = defns;
-	return 1;
-	}
-
-const char *ENGINE_get_id(const ENGINE *e)
-	{
-	return e->id;
-	}
-
-const char *ENGINE_get_name(const ENGINE *e)
-	{
-	return e->name;
-	}
-
-ENGINE_GEN_INT_FUNC_PTR ENGINE_get_destroy_function(const ENGINE *e)
-	{
-	return e->destroy;
-	}
-
-ENGINE_GEN_INT_FUNC_PTR ENGINE_get_init_function(const ENGINE *e)
-	{
-	return e->init;
-	}
-
-ENGINE_GEN_INT_FUNC_PTR ENGINE_get_finish_function(const ENGINE *e)
-	{
-	return e->finish;
-	}
-
-ENGINE_CTRL_FUNC_PTR ENGINE_get_ctrl_function(const ENGINE *e)
-	{
-	return e->ctrl;
-	}
-
-int ENGINE_get_flags(const ENGINE *e)
-	{
-	return e->flags;
-	}
-
-const ENGINE_CMD_DEFN *ENGINE_get_cmd_defns(const ENGINE *e)
-	{
-	return e->cmd_defns;
-	}
-
-/* eng_lib.o is pretty much linked into anything that touches ENGINE already, so
- * put the "static_state" hack here. */
-
-static int internal_static_hack = 0;
-
-void *ENGINE_get_static_state(void)
-	{
-	return &internal_static_hack;
-	}
diff --git a/crypto/openssl/crypto/engine/eng_list.c b/crypto/openssl/crypto/engine/eng_list.c
deleted file mode 100644
index bd511944bafd..000000000000
--- a/crypto/openssl/crypto/engine/eng_list.c
+++ /dev/null
@@ -1,431 +0,0 @@
-/* crypto/engine/eng_list.c */
-/* Written by Geoff Thorpe (geoff@geoffthorpe.net) for the OpenSSL
- * project 2000.
- */
-/* ====================================================================
- * Copyright (c) 1999-2001 The OpenSSL Project.  All rights reserved.
- *
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions
- * are met:
- *
- * 1. Redistributions of source code must retain the above copyright
- *    notice, this list of conditions and the following disclaimer. 
- *
- * 2. Redistributions in binary form must reproduce the above copyright
- *    notice, this list of conditions and the following disclaimer in
- *    the documentation and/or other materials provided with the
- *    distribution.
- *
- * 3. All advertising materials mentioning features or use of this
- *    software must display the following acknowledgment:
- *    "This product includes software developed by the OpenSSL Project
- *    for use in the OpenSSL Toolkit. (http://www.OpenSSL.org/)"
- *
- * 4. The names "OpenSSL Toolkit" and "OpenSSL Project" must not be used to
- *    endorse or promote products derived from this software without
- *    prior written permission. For written permission, please contact
- *    licensing@OpenSSL.org.
- *
- * 5. Products derived from this software may not be called "OpenSSL"
- *    nor may "OpenSSL" appear in their names without prior written
- *    permission of the OpenSSL Project.
- *
- * 6. Redistributions of any form whatsoever must retain the following
- *    acknowledgment:
- *    "This product includes software developed by the OpenSSL Project
- *    for use in the OpenSSL Toolkit (http://www.OpenSSL.org/)"
- *
- * THIS SOFTWARE IS PROVIDED BY THE OpenSSL PROJECT ``AS IS'' AND ANY
- * EXPRESSED OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
- * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR
- * PURPOSE ARE DISCLAIMED.  IN NO EVENT SHALL THE OpenSSL PROJECT OR
- * ITS CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
- * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
- * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
- * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
- * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
- * STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
- * ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED
- * OF THE POSSIBILITY OF SUCH DAMAGE.
- * ====================================================================
- *
- * This product includes cryptographic software written by Eric Young
- * (eay@cryptsoft.com).  This product includes software written by Tim
- * Hudson (tjh@cryptsoft.com).
- *
- */
-/* ====================================================================
- * Copyright 2002 Sun Microsystems, Inc. ALL RIGHTS RESERVED.
- * ECDH support in OpenSSL originally developed by 
- * SUN MICROSYSTEMS, INC., and contributed to the OpenSSL project.
- */
-
-#include "eng_int.h"
-
-/* The linked-list of pointers to engine types. engine_list_head
- * incorporates an implicit structural reference but engine_list_tail
- * does not - the latter is a computational niceity and only points
- * to something that is already pointed to by its predecessor in the
- * list (or engine_list_head itself). In the same way, the use of the
- * "prev" pointer in each ENGINE is to save excessive list iteration,
- * it doesn't correspond to an extra structural reference. Hence,
- * engine_list_head, and each non-null "next" pointer account for
- * the list itself assuming exactly 1 structural reference on each
- * list member. */
-static ENGINE *engine_list_head = NULL;
-static ENGINE *engine_list_tail = NULL;
-
-/* This cleanup function is only needed internally. If it should be called, we
- * register it with the "ENGINE_cleanup()" stack to be called during cleanup. */
-
-static void engine_list_cleanup(void)
-	{
-	ENGINE *iterator = engine_list_head;
-
-	while(iterator != NULL)
-		{
-		ENGINE_remove(iterator);
-		iterator = engine_list_head;
-		}
-	return;
-	}
-
-/* These static functions starting with a lower case "engine_" always
- * take place when CRYPTO_LOCK_ENGINE has been locked up. */
-static int engine_list_add(ENGINE *e)
-	{
-	int conflict = 0;
-	ENGINE *iterator = NULL;
-
-	if(e == NULL)
-		{
-		ENGINEerr(ENGINE_F_ENGINE_LIST_ADD,
-			ERR_R_PASSED_NULL_PARAMETER);
-		return 0;
-		}
-	iterator = engine_list_head;
-	while(iterator && !conflict)
-		{
-		conflict = (strcmp(iterator->id, e->id) == 0);
-		iterator = iterator->next;
-		}
-	if(conflict)
-		{
-		ENGINEerr(ENGINE_F_ENGINE_LIST_ADD,
-			ENGINE_R_CONFLICTING_ENGINE_ID);
-		return 0;
-		}
-	if(engine_list_head == NULL)
-		{
-		/* We are adding to an empty list. */
-		if(engine_list_tail)
-			{
-			ENGINEerr(ENGINE_F_ENGINE_LIST_ADD,
-				ENGINE_R_INTERNAL_LIST_ERROR);
-			return 0;
-			}
-		engine_list_head = e;
-		e->prev = NULL;
-		/* The first time the list allocates, we should register the
-		 * cleanup. */
-		engine_cleanup_add_last(engine_list_cleanup);
-		}
-	else
-		{
-		/* We are adding to the tail of an existing list. */
-		if((engine_list_tail == NULL) ||
-				(engine_list_tail->next != NULL))
-			{
-			ENGINEerr(ENGINE_F_ENGINE_LIST_ADD,
-				ENGINE_R_INTERNAL_LIST_ERROR);
-			return 0;
-			}
-		engine_list_tail->next = e;
-		e->prev = engine_list_tail;
-		}
-	/* Having the engine in the list assumes a structural
-	 * reference. */
-	e->struct_ref++;
-	engine_ref_debug(e, 0, 1)
-	/* However it came to be, e is the last item in the list. */
-	engine_list_tail = e;
-	e->next = NULL;
-	return 1;
-	}
-
-static int engine_list_remove(ENGINE *e)
-	{
-	ENGINE *iterator;
-
-	if(e == NULL)
-		{
-		ENGINEerr(ENGINE_F_ENGINE_LIST_REMOVE,
-			ERR_R_PASSED_NULL_PARAMETER);
-		return 0;
-		}
-	/* We need to check that e is in our linked list! */
-	iterator = engine_list_head;
-	while(iterator && (iterator != e))
-		iterator = iterator->next;
-	if(iterator == NULL)
-		{
-		ENGINEerr(ENGINE_F_ENGINE_LIST_REMOVE,
-			ENGINE_R_ENGINE_IS_NOT_IN_LIST);
-		return 0;
-		}
-	/* un-link e from the chain. */
-	if(e->next)
-		e->next->prev = e->prev;
-	if(e->prev)
-		e->prev->next = e->next;
-	/* Correct our head/tail if necessary. */
-	if(engine_list_head == e)
-		engine_list_head = e->next;
-	if(engine_list_tail == e)
-		engine_list_tail = e->prev;
-	engine_free_util(e, 0);
-	return 1;
-	}
-
-/* Get the first/last "ENGINE" type available. */
-ENGINE *ENGINE_get_first(void)
-	{
-	ENGINE *ret;
-
-	CRYPTO_w_lock(CRYPTO_LOCK_ENGINE);
-	ret = engine_list_head;
-	if(ret)
-		{
-		ret->struct_ref++;
-		engine_ref_debug(ret, 0, 1)
-		}
-	CRYPTO_w_unlock(CRYPTO_LOCK_ENGINE);
-	return ret;
-	}
-
-ENGINE *ENGINE_get_last(void)
-	{
-	ENGINE *ret;
-
-	CRYPTO_w_lock(CRYPTO_LOCK_ENGINE);
-	ret = engine_list_tail;
-	if(ret)
-		{
-		ret->struct_ref++;
-		engine_ref_debug(ret, 0, 1)
-		}
-	CRYPTO_w_unlock(CRYPTO_LOCK_ENGINE);
-	return ret;
-	}
-
-/* Iterate to the next/previous "ENGINE" type (NULL = end of the list). */
-ENGINE *ENGINE_get_next(ENGINE *e)
-	{
-	ENGINE *ret = NULL;
-	if(e == NULL)
-		{
-		ENGINEerr(ENGINE_F_ENGINE_GET_NEXT,
-			ERR_R_PASSED_NULL_PARAMETER);
-		return 0;
-		}
-	CRYPTO_w_lock(CRYPTO_LOCK_ENGINE);
-	ret = e->next;
-	if(ret)
-		{
-		/* Return a valid structural refernce to the next ENGINE */
-		ret->struct_ref++;
-		engine_ref_debug(ret, 0, 1)
-		}
-	CRYPTO_w_unlock(CRYPTO_LOCK_ENGINE);
-	/* Release the structural reference to the previous ENGINE */
-	ENGINE_free(e);
-	return ret;
-	}
-
-ENGINE *ENGINE_get_prev(ENGINE *e)
-	{
-	ENGINE *ret = NULL;
-	if(e == NULL)
-		{
-		ENGINEerr(ENGINE_F_ENGINE_GET_PREV,
-			ERR_R_PASSED_NULL_PARAMETER);
-		return 0;
-		}
-	CRYPTO_w_lock(CRYPTO_LOCK_ENGINE);
-	ret = e->prev;
-	if(ret)
-		{
-		/* Return a valid structural reference to the next ENGINE */
-		ret->struct_ref++;
-		engine_ref_debug(ret, 0, 1)
-		}
-	CRYPTO_w_unlock(CRYPTO_LOCK_ENGINE);
-	/* Release the structural reference to the previous ENGINE */
-	ENGINE_free(e);
-	return ret;
-	}
-
-/* Add another "ENGINE" type into the list. */
-int ENGINE_add(ENGINE *e)
-	{
-	int to_return = 1;
-	if(e == NULL)
-		{
-		ENGINEerr(ENGINE_F_ENGINE_ADD,
-			ERR_R_PASSED_NULL_PARAMETER);
-		return 0;
-		}
-	if((e->id == NULL) || (e->name == NULL))
-		{
-		ENGINEerr(ENGINE_F_ENGINE_ADD,
-			ENGINE_R_ID_OR_NAME_MISSING);
-		}
-	CRYPTO_w_lock(CRYPTO_LOCK_ENGINE);
-	if(!engine_list_add(e))
-		{
-		ENGINEerr(ENGINE_F_ENGINE_ADD,
-			ENGINE_R_INTERNAL_LIST_ERROR);
-		to_return = 0;
-		}
-	CRYPTO_w_unlock(CRYPTO_LOCK_ENGINE);
-	return to_return;
-	}
-
-/* Remove an existing "ENGINE" type from the array. */
-int ENGINE_remove(ENGINE *e)
-	{
-	int to_return = 1;
-	if(e == NULL)
-		{
-		ENGINEerr(ENGINE_F_ENGINE_REMOVE,
-			ERR_R_PASSED_NULL_PARAMETER);
-		return 0;
-		}
-	CRYPTO_w_lock(CRYPTO_LOCK_ENGINE);
-	if(!engine_list_remove(e))
-		{
-		ENGINEerr(ENGINE_F_ENGINE_REMOVE,
-			ENGINE_R_INTERNAL_LIST_ERROR);
-		to_return = 0;
-		}
-	CRYPTO_w_unlock(CRYPTO_LOCK_ENGINE);
-	return to_return;
-	}
-
-static void engine_cpy(ENGINE *dest, const ENGINE *src)
-	{
-	dest->id = src->id;
-	dest->name = src->name;
-#ifndef OPENSSL_NO_RSA
-	dest->rsa_meth = src->rsa_meth;
-#endif
-#ifndef OPENSSL_NO_DSA
-	dest->dsa_meth = src->dsa_meth;
-#endif
-#ifndef OPENSSL_NO_DH
-	dest->dh_meth = src->dh_meth;
-#endif
-#ifndef OPENSSL_NO_ECDH
-	dest->ecdh_meth = src->ecdh_meth;
-#endif
-#ifndef OPENSSL_NO_ECDSA
-	dest->ecdsa_meth = src->ecdsa_meth;
-#endif
-	dest->rand_meth = src->rand_meth;
-	dest->store_meth = src->store_meth;
-	dest->ciphers = src->ciphers;
-	dest->digests = src->digests;
-	dest->destroy = src->destroy;
-	dest->init = src->init;
-	dest->finish = src->finish;
-	dest->ctrl = src->ctrl;
-	dest->load_privkey = src->load_privkey;
-	dest->load_pubkey = src->load_pubkey;
-	dest->cmd_defns = src->cmd_defns;
-	dest->flags = src->flags;
-	}
-
-ENGINE *ENGINE_by_id(const char *id)
-	{
-	ENGINE *iterator;
-	char *load_dir = NULL;
-	if(id == NULL)
-		{
-		ENGINEerr(ENGINE_F_ENGINE_BY_ID,
-			ERR_R_PASSED_NULL_PARAMETER);
-		return NULL;
-		}
-	CRYPTO_w_lock(CRYPTO_LOCK_ENGINE);
-	iterator = engine_list_head;
-	while(iterator && (strcmp(id, iterator->id) != 0))
-		iterator = iterator->next;
-	if(iterator)
-		{
-		/* We need to return a structural reference. If this is an
-		 * ENGINE type that returns copies, make a duplicate - otherwise
-		 * increment the existing ENGINE's reference count. */
-		if(iterator->flags & ENGINE_FLAGS_BY_ID_COPY)
-			{
-			ENGINE *cp = ENGINE_new();
-			if(!cp)
-				iterator = NULL;
-			else
-				{
-				engine_cpy(cp, iterator);
-				iterator = cp;
-				}
-			}
-		else
-			{
-			iterator->struct_ref++;
-			engine_ref_debug(iterator, 0, 1)
-			}
-		}
-	CRYPTO_w_unlock(CRYPTO_LOCK_ENGINE);
-#if 0
-	if(iterator == NULL)
-		{
-		ENGINEerr(ENGINE_F_ENGINE_BY_ID,
-			ENGINE_R_NO_SUCH_ENGINE);
-		ERR_add_error_data(2, "id=", id);
-		}
-	return iterator;
-#else
-	/* EEK! Experimental code starts */
-	if(iterator) return iterator;
-	/* Prevent infinite recusrion if we're looking for the dynamic engine. */
-	if (strcmp(id, "dynamic"))
-		{
-#ifdef OPENSSL_SYS_VMS
-		if((load_dir = getenv("OPENSSL_ENGINES")) == 0) load_dir = "SSLROOT:[ENGINES]";
-#else
-		if((load_dir = getenv("OPENSSL_ENGINES")) == 0) load_dir = ENGINESDIR;
-#endif
-		iterator = ENGINE_by_id("dynamic");
-		if(!iterator || !ENGINE_ctrl_cmd_string(iterator, "ID", id, 0) ||
-				!ENGINE_ctrl_cmd_string(iterator, "DIR_LOAD", "2", 0) ||
-				!ENGINE_ctrl_cmd_string(iterator, "DIR_ADD",
-					load_dir, 0) ||
-				!ENGINE_ctrl_cmd_string(iterator, "LOAD", NULL, 0))
-				goto notfound;
-		return iterator;
-		}
-notfound:
-	ENGINEerr(ENGINE_F_ENGINE_BY_ID,ENGINE_R_NO_SUCH_ENGINE);
-	ERR_add_error_data(2, "id=", id);
-	return NULL;
-	/* EEK! Experimental code ends */
-#endif
-	}
-
-int ENGINE_up_ref(ENGINE *e)
-	{
-	if (e == NULL)
-		{
-		ENGINEerr(ENGINE_F_ENGINE_UP_REF,ERR_R_PASSED_NULL_PARAMETER);
-		return 0;
-		}
-	CRYPTO_add(&e->struct_ref,1,CRYPTO_LOCK_ENGINE);
-	return 1;
-	}
diff --git a/crypto/openssl/crypto/engine/eng_openssl.c b/crypto/openssl/crypto/engine/eng_openssl.c
deleted file mode 100644
index 7c139ae2efcb..000000000000
--- a/crypto/openssl/crypto/engine/eng_openssl.c
+++ /dev/null
@@ -1,384 +0,0 @@
-/* crypto/engine/eng_openssl.c */
-/* Written by Geoff Thorpe (geoff@geoffthorpe.net) for the OpenSSL
- * project 2000.
- */
-/* ====================================================================
- * Copyright (c) 1999-2001 The OpenSSL Project.  All rights reserved.
- *
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions
- * are met:
- *
- * 1. Redistributions of source code must retain the above copyright
- *    notice, this list of conditions and the following disclaimer. 
- *
- * 2. Redistributions in binary form must reproduce the above copyright
- *    notice, this list of conditions and the following disclaimer in
- *    the documentation and/or other materials provided with the
- *    distribution.
- *
- * 3. All advertising materials mentioning features or use of this
- *    software must display the following acknowledgment:
- *    "This product includes software developed by the OpenSSL Project
- *    for use in the OpenSSL Toolkit. (http://www.OpenSSL.org/)"
- *
- * 4. The names "OpenSSL Toolkit" and "OpenSSL Project" must not be used to
- *    endorse or promote products derived from this software without
- *    prior written permission. For written permission, please contact
- *    licensing@OpenSSL.org.
- *
- * 5. Products derived from this software may not be called "OpenSSL"
- *    nor may "OpenSSL" appear in their names without prior written
- *    permission of the OpenSSL Project.
- *
- * 6. Redistributions of any form whatsoever must retain the following
- *    acknowledgment:
- *    "This product includes software developed by the OpenSSL Project
- *    for use in the OpenSSL Toolkit (http://www.OpenSSL.org/)"
- *
- * THIS SOFTWARE IS PROVIDED BY THE OpenSSL PROJECT ``AS IS'' AND ANY
- * EXPRESSED OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
- * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR
- * PURPOSE ARE DISCLAIMED.  IN NO EVENT SHALL THE OpenSSL PROJECT OR
- * ITS CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
- * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
- * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
- * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
- * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
- * STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
- * ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED
- * OF THE POSSIBILITY OF SUCH DAMAGE.
- * ====================================================================
- *
- * This product includes cryptographic software written by Eric Young
- * (eay@cryptsoft.com).  This product includes software written by Tim
- * Hudson (tjh@cryptsoft.com).
- *
- */
-/* ====================================================================
- * Copyright 2002 Sun Microsystems, Inc. ALL RIGHTS RESERVED.
- * ECDH support in OpenSSL originally developed by 
- * SUN MICROSYSTEMS, INC., and contributed to the OpenSSL project.
- */
-
-
-#include <stdio.h>
-#include <openssl/crypto.h>
-#include "cryptlib.h"
-#include <openssl/engine.h>
-#include <openssl/dso.h>
-#include <openssl/pem.h>
-#include <openssl/evp.h>
-#include <openssl/rand.h>
-#ifndef OPENSSL_NO_RSA
-#include <openssl/rsa.h>
-#endif
-#ifndef OPENSSL_NO_DSA
-#include <openssl/dsa.h>
-#endif
-#ifndef OPENSSL_NO_DH
-#include <openssl/dh.h>
-#endif
-
-/* This testing gunk is implemented (and explained) lower down. It also assumes
- * the application explicitly calls "ENGINE_load_openssl()" because this is no
- * longer automatic in ENGINE_load_builtin_engines(). */
-#define TEST_ENG_OPENSSL_RC4
-#define TEST_ENG_OPENSSL_PKEY
-/* #define TEST_ENG_OPENSSL_RC4_OTHERS */
-#define TEST_ENG_OPENSSL_RC4_P_INIT
-/* #define TEST_ENG_OPENSSL_RC4_P_CIPHER */
-#define TEST_ENG_OPENSSL_SHA
-/* #define TEST_ENG_OPENSSL_SHA_OTHERS */
-/* #define TEST_ENG_OPENSSL_SHA_P_INIT */
-/* #define TEST_ENG_OPENSSL_SHA_P_UPDATE */
-/* #define TEST_ENG_OPENSSL_SHA_P_FINAL */
-
-/* Now check what of those algorithms are actually enabled */
-#ifdef OPENSSL_NO_RC4
-#undef TEST_ENG_OPENSSL_RC4
-#undef TEST_ENG_OPENSSL_RC4_OTHERS
-#undef TEST_ENG_OPENSSL_RC4_P_INIT
-#undef TEST_ENG_OPENSSL_RC4_P_CIPHER
-#endif
-#if defined(OPENSSL_NO_SHA) || defined(OPENSSL_NO_SHA0) || defined(OPENSSL_NO_SHA1)
-#undef TEST_ENG_OPENSSL_SHA
-#undef TEST_ENG_OPENSSL_SHA_OTHERS
-#undef TEST_ENG_OPENSSL_SHA_P_INIT
-#undef TEST_ENG_OPENSSL_SHA_P_UPDATE
-#undef TEST_ENG_OPENSSL_SHA_P_FINAL 
-#endif
-
-#ifdef TEST_ENG_OPENSSL_RC4
-static int openssl_ciphers(ENGINE *e, const EVP_CIPHER **cipher,
-				const int **nids, int nid);
-#endif
-#ifdef TEST_ENG_OPENSSL_SHA
-static int openssl_digests(ENGINE *e, const EVP_MD **digest,
-				const int **nids, int nid);
-#endif
-
-#ifdef TEST_ENG_OPENSSL_PKEY
-static EVP_PKEY *openssl_load_privkey(ENGINE *eng, const char *key_id,
-	UI_METHOD *ui_method, void *callback_data);
-#endif
-
-/* The constants used when creating the ENGINE */
-static const char *engine_openssl_id = "openssl";
-static const char *engine_openssl_name = "Software engine support";
-
-/* This internal function is used by ENGINE_openssl() and possibly by the
- * "dynamic" ENGINE support too */
-static int bind_helper(ENGINE *e)
-	{
-	if(!ENGINE_set_id(e, engine_openssl_id)
-			|| !ENGINE_set_name(e, engine_openssl_name)
-#ifndef TEST_ENG_OPENSSL_NO_ALGORITHMS
-#ifndef OPENSSL_NO_RSA
-			|| !ENGINE_set_RSA(e, RSA_get_default_method())
-#endif
-#ifndef OPENSSL_NO_DSA
-			|| !ENGINE_set_DSA(e, DSA_get_default_method())
-#endif
-#ifndef OPENSSL_NO_ECDH
-			|| !ENGINE_set_ECDH(e, ECDH_OpenSSL())
-#endif
-#ifndef OPENSSL_NO_ECDSA
-			|| !ENGINE_set_ECDSA(e, ECDSA_OpenSSL())
-#endif
-#ifndef OPENSSL_NO_DH
-			|| !ENGINE_set_DH(e, DH_get_default_method())
-#endif
-			|| !ENGINE_set_RAND(e, RAND_SSLeay())
-#ifdef TEST_ENG_OPENSSL_RC4
-			|| !ENGINE_set_ciphers(e, openssl_ciphers)
-#endif
-#ifdef TEST_ENG_OPENSSL_SHA
-			|| !ENGINE_set_digests(e, openssl_digests)
-#endif
-#endif
-#ifdef TEST_ENG_OPENSSL_PKEY
-			|| !ENGINE_set_load_privkey_function(e, openssl_load_privkey)
-#endif
-			)
-		return 0;
-	/* If we add errors to this ENGINE, ensure the error handling is setup here */
-	/* openssl_load_error_strings(); */
-	return 1;
-	}
-
-static ENGINE *engine_openssl(void)
-	{
-	ENGINE *ret = ENGINE_new();
-	if(!ret)
-		return NULL;
-	if(!bind_helper(ret))
-		{
-		ENGINE_free(ret);
-		return NULL;
-		}
-	return ret;
-	}
-
-void ENGINE_load_openssl(void)
-	{
-	ENGINE *toadd = engine_openssl();
-	if(!toadd) return;
-	ENGINE_add(toadd);
-	/* If the "add" worked, it gets a structural reference. So either way,
-	 * we release our just-created reference. */
-	ENGINE_free(toadd);
-	ERR_clear_error();
-	}
-
-/* This stuff is needed if this ENGINE is being compiled into a self-contained
- * shared-library. */
-#ifdef ENGINE_DYNAMIC_SUPPORT
-static int bind_fn(ENGINE *e, const char *id)
-	{
-	if(id && (strcmp(id, engine_openssl_id) != 0))
-		return 0;
-	if(!bind_helper(e))
-		return 0;
-	return 1;
-	}
-IMPLEMENT_DYNAMIC_CHECK_FN()
-IMPLEMENT_DYNAMIC_BIND_FN(bind_fn)
-#endif /* ENGINE_DYNAMIC_SUPPORT */
-
-#ifdef TEST_ENG_OPENSSL_RC4
-/* This section of code compiles an "alternative implementation" of two modes of
- * RC4 into this ENGINE. The result is that EVP_CIPHER operation for "rc4"
- * should under normal circumstances go via this support rather than the default
- * EVP support. There are other symbols to tweak the testing;
- *    TEST_ENC_OPENSSL_RC4_OTHERS - print a one line message to stderr each time
- *        we're asked for a cipher we don't support (should not happen).
- *    TEST_ENG_OPENSSL_RC4_P_INIT - print a one line message to stderr each time
- *        the "init_key" handler is called.
- *    TEST_ENG_OPENSSL_RC4_P_CIPHER - ditto for the "cipher" handler.
- */
-#include <openssl/rc4.h>
-#define TEST_RC4_KEY_SIZE		16
-static int test_cipher_nids[] = {NID_rc4,NID_rc4_40};
-static int test_cipher_nids_number = 2;
-typedef struct {
-	unsigned char key[TEST_RC4_KEY_SIZE];
-	RC4_KEY ks;
-	} TEST_RC4_KEY;
-#define test(ctx) ((TEST_RC4_KEY *)(ctx)->cipher_data)
-static int test_rc4_init_key(EVP_CIPHER_CTX *ctx, const unsigned char *key,
-			const unsigned char *iv, int enc)
-	{
-#ifdef TEST_ENG_OPENSSL_RC4_P_INIT
-	fprintf(stderr, "(TEST_ENG_OPENSSL_RC4) test_init_key() called\n");
-#endif
-	memcpy(&test(ctx)->key[0],key,EVP_CIPHER_CTX_key_length(ctx));
-	RC4_set_key(&test(ctx)->ks,EVP_CIPHER_CTX_key_length(ctx),
-		test(ctx)->key);
-	return 1;
-	}
-static int test_rc4_cipher(EVP_CIPHER_CTX *ctx, unsigned char *out,
-		      const unsigned char *in, unsigned int inl)
-	{
-#ifdef TEST_ENG_OPENSSL_RC4_P_CIPHER
-	fprintf(stderr, "(TEST_ENG_OPENSSL_RC4) test_cipher() called\n");
-#endif
-	RC4(&test(ctx)->ks,inl,in,out);
-	return 1;
-	}
-static const EVP_CIPHER test_r4_cipher=
-	{
-	NID_rc4,
-	1,TEST_RC4_KEY_SIZE,0,
-	EVP_CIPH_VARIABLE_LENGTH,
-	test_rc4_init_key,
-	test_rc4_cipher,
-	NULL,
-	sizeof(TEST_RC4_KEY),
-	NULL,
-	NULL,
-	NULL,
-	NULL
-	};
-static const EVP_CIPHER test_r4_40_cipher=
-	{
-	NID_rc4_40,
-	1,5 /* 40 bit */,0,
-	EVP_CIPH_VARIABLE_LENGTH,
-	test_rc4_init_key,
-	test_rc4_cipher,
-	NULL,
-	sizeof(TEST_RC4_KEY),
-	NULL, 
-	NULL,
-	NULL,
-	NULL
-	};
-static int openssl_ciphers(ENGINE *e, const EVP_CIPHER **cipher,
-			const int **nids, int nid)
-	{
-	if(!cipher)
-		{
-		/* We are returning a list of supported nids */
-		*nids = test_cipher_nids;
-		return test_cipher_nids_number;
-		}
-	/* We are being asked for a specific cipher */
-	if(nid == NID_rc4)
-		*cipher = &test_r4_cipher;
-	else if(nid == NID_rc4_40)
-		*cipher = &test_r4_40_cipher;
-	else
-		{
-#ifdef TEST_ENG_OPENSSL_RC4_OTHERS
-		fprintf(stderr, "(TEST_ENG_OPENSSL_RC4) returning NULL for "
-				"nid %d\n", nid);
-#endif
-		*cipher = NULL;
-		return 0;
-		}
-	return 1;
-	}
-#endif
-
-#ifdef TEST_ENG_OPENSSL_SHA
-/* Much the same sort of comment as for TEST_ENG_OPENSSL_RC4 */
-#include <openssl/sha.h>
-static int test_digest_nids[] = {NID_sha1};
-static int test_digest_nids_number = 1;
-static int test_sha1_init(EVP_MD_CTX *ctx)
-	{
-#ifdef TEST_ENG_OPENSSL_SHA_P_INIT
-	fprintf(stderr, "(TEST_ENG_OPENSSL_SHA) test_sha1_init() called\n");
-#endif
-	return SHA1_Init(ctx->md_data);
-	}
-static int test_sha1_update(EVP_MD_CTX *ctx,const void *data,size_t count)
-	{
-#ifdef TEST_ENG_OPENSSL_SHA_P_UPDATE
-	fprintf(stderr, "(TEST_ENG_OPENSSL_SHA) test_sha1_update() called\n");
-#endif
-	return SHA1_Update(ctx->md_data,data,count);
-	}
-static int test_sha1_final(EVP_MD_CTX *ctx,unsigned char *md)
-	{
-#ifdef TEST_ENG_OPENSSL_SHA_P_FINAL
-	fprintf(stderr, "(TEST_ENG_OPENSSL_SHA) test_sha1_final() called\n");
-#endif
-	return SHA1_Final(md,ctx->md_data);
-	}
-static const EVP_MD test_sha_md=
-	{
-	NID_sha1,
-	NID_sha1WithRSAEncryption,
-	SHA_DIGEST_LENGTH,
-	0,
-	test_sha1_init,
-	test_sha1_update,
-	test_sha1_final,
-	NULL,
-	NULL,
-	EVP_PKEY_RSA_method,
-	SHA_CBLOCK,
-	sizeof(EVP_MD *)+sizeof(SHA_CTX),
-	};
-static int openssl_digests(ENGINE *e, const EVP_MD **digest,
-			const int **nids, int nid)
-	{
-	if(!digest)
-		{
-		/* We are returning a list of supported nids */
-		*nids = test_digest_nids;
-		return test_digest_nids_number;
-		}
-	/* We are being asked for a specific digest */
-	if(nid == NID_sha1)
-		*digest = &test_sha_md;
-	else
-		{
-#ifdef TEST_ENG_OPENSSL_SHA_OTHERS
-		fprintf(stderr, "(TEST_ENG_OPENSSL_SHA) returning NULL for "
-				"nid %d\n", nid);
-#endif
-		*digest = NULL;
-		return 0;
-		}
-	return 1;
-	}
-#endif
-
-#ifdef TEST_ENG_OPENSSL_PKEY
-static EVP_PKEY *openssl_load_privkey(ENGINE *eng, const char *key_id,
-	UI_METHOD *ui_method, void *callback_data)
-	{
-	BIO *in;
-	EVP_PKEY *key;
-	fprintf(stderr, "(TEST_ENG_OPENSSL_PKEY)Loading Private key %s\n", key_id);
-	in = BIO_new_file(key_id, "r");
-	if (!in)
-		return NULL;
-	key = PEM_read_bio_PrivateKey(in, NULL, 0, NULL);
-	BIO_free(in);
-	return key;
-	}
-#endif
diff --git a/crypto/openssl/crypto/engine/eng_padlock.c b/crypto/openssl/crypto/engine/eng_padlock.c
deleted file mode 100644
index e1d66eac58ad..000000000000
--- a/crypto/openssl/crypto/engine/eng_padlock.c
+++ /dev/null
@@ -1,1216 +0,0 @@
-/* 
- * Support for VIA PadLock Advanced Cryptography Engine (ACE)
- * Written by Michal Ludvig <michal@logix.cz>
- *            http://www.logix.cz/michal
- *
- * Big thanks to Andy Polyakov for a help with optimization, 
- * assembler fixes, port to MS Windows and a lot of other 
- * valuable work on this engine!
- */
-
-/* ====================================================================
- * Copyright (c) 1999-2001 The OpenSSL Project.  All rights reserved.
- *
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions
- * are met:
- *
- * 1. Redistributions of source code must retain the above copyright
- *    notice, this list of conditions and the following disclaimer.
- *
- * 2. Redistributions in binary form must reproduce the above copyright
- *    notice, this list of conditions and the following disclaimer in
- *    the documentation and/or other materials provided with the
- *    distribution.
- *
- * 3. All advertising materials mentioning features or use of this
- *    software must display the following acknowledgment:
- *    "This product includes software developed by the OpenSSL Project
- *    for use in the OpenSSL Toolkit. (http://www.OpenSSL.org/)"
- *
- * 4. The names "OpenSSL Toolkit" and "OpenSSL Project" must not be used to
- *    endorse or promote products derived from this software without
- *    prior written permission. For written permission, please contact
- *    licensing@OpenSSL.org.
- *
- * 5. Products derived from this software may not be called "OpenSSL"
- *    nor may "OpenSSL" appear in their names without prior written
- *    permission of the OpenSSL Project.
- *
- * 6. Redistributions of any form whatsoever must retain the following
- *    acknowledgment:
- *    "This product includes software developed by the OpenSSL Project
- *    for use in the OpenSSL Toolkit (http://www.OpenSSL.org/)"
- *
- * THIS SOFTWARE IS PROVIDED BY THE OpenSSL PROJECT ``AS IS'' AND ANY
- * EXPRESSED OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
- * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR
- * PURPOSE ARE DISCLAIMED.  IN NO EVENT SHALL THE OpenSSL PROJECT OR
- * ITS CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
- * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
- * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
- * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
- * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
- * STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
- * ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED
- * OF THE POSSIBILITY OF SUCH DAMAGE.
- * ====================================================================
- *
- * This product includes cryptographic software written by Eric Young
- * (eay@cryptsoft.com).  This product includes software written by Tim
- * Hudson (tjh@cryptsoft.com).
- *
- */
-
-
-#include <stdio.h>
-#include <string.h>
-
-#include <openssl/opensslconf.h>
-#include <openssl/crypto.h>
-#include <openssl/dso.h>
-#include <openssl/engine.h>
-#include <openssl/evp.h>
-#ifndef OPENSSL_NO_AES
-#include <openssl/aes.h>
-#endif
-#include <openssl/rand.h>
-#include <openssl/err.h>
-
-#ifndef OPENSSL_NO_HW
-#ifndef OPENSSL_NO_HW_PADLOCK
-
-/* Attempt to have a single source for both 0.9.7 and 0.9.8 :-) */
-#if (OPENSSL_VERSION_NUMBER >= 0x00908000L)
-#  ifndef OPENSSL_NO_DYNAMIC_ENGINE
-#    define DYNAMIC_ENGINE
-#  endif
-#elif (OPENSSL_VERSION_NUMBER >= 0x00907000L)
-#  ifdef ENGINE_DYNAMIC_SUPPORT
-#    define DYNAMIC_ENGINE
-#  endif
-#else
-#  error "Only OpenSSL >= 0.9.7 is supported"
-#endif
-
-/* VIA PadLock AES is available *ONLY* on some x86 CPUs.
-   Not only that it doesn't exist elsewhere, but it
-   even can't be compiled on other platforms!
- 
-   In addition, because of the heavy use of inline assembler,
-   compiler choice is limited to GCC and Microsoft C. */
-#undef COMPILE_HW_PADLOCK
-#if !defined(I386_ONLY) && !defined(OPENSSL_NO_INLINE_ASM)
-# if (defined(__GNUC__) && (defined(__i386__) || defined(__i386))) || \
-     (defined(_MSC_VER) && defined(_M_IX86))
-#  define COMPILE_HW_PADLOCK
-static ENGINE *ENGINE_padlock (void);
-# endif
-#endif
-
-void ENGINE_load_padlock (void)
-{
-/* On non-x86 CPUs it just returns. */
-#ifdef COMPILE_HW_PADLOCK
-	ENGINE *toadd = ENGINE_padlock ();
-	if (!toadd) return;
-	ENGINE_add (toadd);
-	ENGINE_free (toadd);
-	ERR_clear_error ();
-#endif
-}
-
-#ifdef COMPILE_HW_PADLOCK
-/* We do these includes here to avoid header problems on platforms that
-   do not have the VIA padlock anyway... */
-#ifdef _MSC_VER
-# include <malloc.h>
-# define alloca _alloca
-#else
-# include <stdlib.h>
-#endif
-
-/* Function for ENGINE detection and control */
-static int padlock_available(void);
-static int padlock_init(ENGINE *e);
-
-/* RNG Stuff */
-static RAND_METHOD padlock_rand;
-
-/* Cipher Stuff */
-#ifndef OPENSSL_NO_AES
-static int padlock_ciphers(ENGINE *e, const EVP_CIPHER **cipher, const int **nids, int nid);
-#endif
-
-/* Engine names */
-static const char *padlock_id = "padlock";
-static char padlock_name[100];
-
-/* Available features */
-static int padlock_use_ace = 0;	/* Advanced Cryptography Engine */
-static int padlock_use_rng = 0;	/* Random Number Generator */
-#ifndef OPENSSL_NO_AES
-static int padlock_aes_align_required = 1;
-#endif
-
-/* ===== Engine "management" functions ===== */
-
-/* Prepare the ENGINE structure for registration */
-static int
-padlock_bind_helper(ENGINE *e)
-{
-	/* Check available features */
-	padlock_available();
-
-#if 1	/* disable RNG for now, see commentary in vicinity of RNG code */
-	padlock_use_rng=0;
-#endif
-
-	/* Generate a nice engine name with available features */
-	BIO_snprintf(padlock_name, sizeof(padlock_name),
-		"VIA PadLock (%s, %s)", 
-		 padlock_use_rng ? "RNG" : "no-RNG",
-		 padlock_use_ace ? "ACE" : "no-ACE");
-
-	/* Register everything or return with an error */ 
-	if (!ENGINE_set_id(e, padlock_id) ||
-	    !ENGINE_set_name(e, padlock_name) ||
-
-	    !ENGINE_set_init_function(e, padlock_init) ||
-#ifndef OPENSSL_NO_AES
-	    (padlock_use_ace && !ENGINE_set_ciphers (e, padlock_ciphers)) ||
-#endif
-	    (padlock_use_rng && !ENGINE_set_RAND (e, &padlock_rand))) {
-		return 0;
-	}
-
-	/* Everything looks good */
-	return 1;
-}
-
-/* Constructor */
-static ENGINE *
-ENGINE_padlock(void)
-{
-	ENGINE *eng = ENGINE_new();
-
-	if (!eng) {
-		return NULL;
-	}
-
-	if (!padlock_bind_helper(eng)) {
-		ENGINE_free(eng);
-		return NULL;
-	}
-
-	return eng;
-}
-
-/* Check availability of the engine */
-static int
-padlock_init(ENGINE *e)
-{
-	return (padlock_use_rng || padlock_use_ace);
-}
-
-/* This stuff is needed if this ENGINE is being compiled into a self-contained
- * shared-library.
- */
-#ifdef DYNAMIC_ENGINE
-static int
-padlock_bind_fn(ENGINE *e, const char *id)
-{
-	if (id && (strcmp(id, padlock_id) != 0)) {
-		return 0;
-	}
-
-	if (!padlock_bind_helper(e))  {
-		return 0;
-	}
-
-	return 1;
-}
-
-IMPLEMENT_DYNAMIC_CHECK_FN ();
-IMPLEMENT_DYNAMIC_BIND_FN (padlock_bind_fn);
-#endif /* DYNAMIC_ENGINE */
-
-/* ===== Here comes the "real" engine ===== */
-
-#ifndef OPENSSL_NO_AES
-/* Some AES-related constants */
-#define AES_BLOCK_SIZE		16
-#define AES_KEY_SIZE_128	16
-#define AES_KEY_SIZE_192	24
-#define AES_KEY_SIZE_256	32
-
-/* Here we store the status information relevant to the 
-   current context. */
-/* BIG FAT WARNING:
- * 	Inline assembler in PADLOCK_XCRYPT_ASM()
- * 	depends on the order of items in this structure.
- * 	Don't blindly modify, reorder, etc!
- */
-struct padlock_cipher_data
-{
-	unsigned char iv[AES_BLOCK_SIZE];	/* Initialization vector */
-	union {	unsigned int pad[4];
-		struct {
-			int rounds:4;
-			int dgst:1;	/* n/a in C3 */
-			int align:1;	/* n/a in C3 */
-			int ciphr:1;	/* n/a in C3 */
-			unsigned int keygen:1;
-			int interm:1;
-			unsigned int encdec:1;
-			int ksize:2;
-		} b;
-	} cword;		/* Control word */
-	AES_KEY ks;		/* Encryption key */
-};
-
-/*
- * Essentially this variable belongs in thread local storage.
- * Having this variable global on the other hand can only cause
- * few bogus key reloads [if any at all on single-CPU system],
- * so we accept the penatly...
- */
-static volatile struct padlock_cipher_data *padlock_saved_context;
-#endif
-
-/*
- * =======================================================
- * Inline assembler section(s).
- * =======================================================
- * Order of arguments is chosen to facilitate Windows port
- * using __fastcall calling convention. If you wish to add
- * more routines, keep in mind that first __fastcall
- * argument is passed in %ecx and second - in %edx.
- * =======================================================
- */
-#if defined(__GNUC__) && __GNUC__>=2
-/*
- * As for excessive "push %ebx"/"pop %ebx" found all over.
- * When generating position-independent code GCC won't let
- * us use "b" in assembler templates nor even respect "ebx"
- * in "clobber description." Therefore the trouble...
- */
-
-/* Helper function - check if a CPUID instruction
-   is available on this CPU */
-static int
-padlock_insn_cpuid_available(void)
-{
-	int result = -1;
-
-	/* We're checking if the bit #21 of EFLAGS 
-	   can be toggled. If yes = CPUID is available. */
-	asm volatile (
-		"pushf\n"
-		"popl %%eax\n"
-		"xorl $0x200000, %%eax\n"
-		"movl %%eax, %%ecx\n"
-		"andl $0x200000, %%ecx\n"
-		"pushl %%eax\n"
-		"popf\n"
-		"pushf\n"
-		"popl %%eax\n"
-		"andl $0x200000, %%eax\n"
-		"xorl %%eax, %%ecx\n"
-		"movl %%ecx, %0\n"
-		: "=r" (result) : : "eax", "ecx");
-	
-	return (result == 0);
-}
-
-/* Load supported features of the CPU to see if
-   the PadLock is available. */
-static int
-padlock_available(void)
-{
-	char vendor_string[16];
-	unsigned int eax, edx;
-
-	/* First check if the CPUID instruction is available at all... */
-	if (! padlock_insn_cpuid_available())
-		return 0;
-
-	/* Are we running on the Centaur (VIA) CPU? */
-	eax = 0x00000000;
-	vendor_string[12] = 0;
-	asm volatile (
-		"pushl	%%ebx\n"
-		"cpuid\n"
-		"movl	%%ebx,(%%edi)\n"
-		"movl	%%edx,4(%%edi)\n"
-		"movl	%%ecx,8(%%edi)\n"
-		"popl	%%ebx"
-		: "+a"(eax) : "D"(vendor_string) : "ecx", "edx");
-	if (strcmp(vendor_string, "CentaurHauls") != 0)
-		return 0;
-
-	/* Check for Centaur Extended Feature Flags presence */
-	eax = 0xC0000000;
-	asm volatile ("pushl %%ebx; cpuid; popl	%%ebx"
-		: "+a"(eax) : : "ecx", "edx");
-	if (eax < 0xC0000001)
-		return 0;
-
-	/* Read the Centaur Extended Feature Flags */
-	eax = 0xC0000001;
-	asm volatile ("pushl %%ebx; cpuid; popl %%ebx"
-		: "+a"(eax), "=d"(edx) : : "ecx");
-
-	/* Fill up some flags */
-	padlock_use_ace = ((edx & (0x3<<6)) == (0x3<<6));
-	padlock_use_rng = ((edx & (0x3<<2)) == (0x3<<2));
-
-	return padlock_use_ace + padlock_use_rng;
-}
-
-#ifndef OPENSSL_NO_AES
-/* Our own htonl()/ntohl() */
-static inline void
-padlock_bswapl(AES_KEY *ks)
-{
-	size_t i = sizeof(ks->rd_key)/sizeof(ks->rd_key[0]);
-	unsigned int *key = ks->rd_key;
-
-	while (i--) {
-		asm volatile ("bswapl %0" : "+r"(*key));
-		key++;
-	}
-}
-#endif
-
-/* Force key reload from memory to the CPU microcode.
-   Loading EFLAGS from the stack clears EFLAGS[30] 
-   which does the trick. */
-static inline void
-padlock_reload_key(void)
-{
-	asm volatile ("pushfl; popfl");
-}
-
-#ifndef OPENSSL_NO_AES
-/*
- * This is heuristic key context tracing. At first one
- * believes that one should use atomic swap instructions,
- * but it's not actually necessary. Point is that if
- * padlock_saved_context was changed by another thread
- * after we've read it and before we compare it with cdata,
- * our key *shall* be reloaded upon thread context switch
- * and we are therefore set in either case...
- */
-static inline void
-padlock_verify_context(struct padlock_cipher_data *cdata)
-{
-	asm volatile (
-	"pushfl\n"
-"	btl	$30,(%%esp)\n"
-"	jnc	1f\n"
-"	cmpl	%2,%1\n"
-"	je	1f\n"
-"	popfl\n"
-"	subl	$4,%%esp\n"
-"1:	addl	$4,%%esp\n"
-"	movl	%2,%0"
-	:"+m"(padlock_saved_context)
-	: "r"(padlock_saved_context), "r"(cdata) : "cc");
-}
-
-/* Template for padlock_xcrypt_* modes */
-/* BIG FAT WARNING: 
- * 	The offsets used with 'leal' instructions
- * 	describe items of the 'padlock_cipher_data'
- * 	structure.
- */
-#define PADLOCK_XCRYPT_ASM(name,rep_xcrypt)	\
-static inline void *name(size_t cnt,		\
-	struct padlock_cipher_data *cdata,	\
-	void *out, const void *inp) 		\
-{	void *iv; 				\
-	asm volatile ( "pushl	%%ebx\n"	\
-		"	leal	16(%0),%%edx\n"	\
-		"	leal	32(%0),%%ebx\n"	\
-			rep_xcrypt "\n"		\
-		"	popl	%%ebx"		\
-		: "=a"(iv), "=c"(cnt), "=D"(out), "=S"(inp) \
-		: "0"(cdata), "1"(cnt), "2"(out), "3"(inp), "m"(*cdata)  \
-		: "edx", "cc", "memory");	\
-	return iv;				\
-}
-
-/* Generate all functions with appropriate opcodes */
-PADLOCK_XCRYPT_ASM(padlock_xcrypt_ecb, ".byte 0xf3,0x0f,0xa7,0xc8")	/* rep xcryptecb */
-PADLOCK_XCRYPT_ASM(padlock_xcrypt_cbc, ".byte 0xf3,0x0f,0xa7,0xd0")	/* rep xcryptcbc */
-PADLOCK_XCRYPT_ASM(padlock_xcrypt_cfb, ".byte 0xf3,0x0f,0xa7,0xe0")	/* rep xcryptcfb */
-PADLOCK_XCRYPT_ASM(padlock_xcrypt_ofb, ".byte 0xf3,0x0f,0xa7,0xe8")	/* rep xcryptofb */
-#endif
-
-/* The RNG call itself */
-static inline unsigned int
-padlock_xstore(void *addr, unsigned int edx_in)
-{
-	unsigned int eax_out;
-
-	asm volatile (".byte 0x0f,0xa7,0xc0"	/* xstore */
-	    : "=a"(eax_out),"=m"(*(unsigned *)addr)
-	    : "D"(addr), "d" (edx_in)
-	    );
-
-	return eax_out;
-}
-
-/* Why not inline 'rep movsd'? I failed to find information on what
- * value in Direction Flag one can expect and consequently have to
- * apply "better-safe-than-sorry" approach and assume "undefined."
- * I could explicitly clear it and restore the original value upon
- * return from padlock_aes_cipher, but it's presumably too much
- * trouble for too little gain...
- *
- * In case you wonder 'rep xcrypt*' instructions above are *not*
- * affected by the Direction Flag and pointers advance toward
- * larger addresses unconditionally.
- */ 
-static inline unsigned char *
-padlock_memcpy(void *dst,const void *src,size_t n)
-{
-	long       *d=dst;
-	const long *s=src;
-
-	n /= sizeof(*d);
-	do { *d++ = *s++; } while (--n);
-
-	return dst;
-}
-
-#elif defined(_MSC_VER)
-/*
- * Unlike GCC these are real functions. In order to minimize impact
- * on performance we adhere to __fastcall calling convention in
- * order to get two first arguments passed through %ecx and %edx.
- * Which kind of suits very well, as instructions in question use
- * both %ecx and %edx as input:-)
- */
-#define REP_XCRYPT(code)		\
-	_asm _emit 0xf3			\
-	_asm _emit 0x0f _asm _emit 0xa7	\
-	_asm _emit code
-
-/* BIG FAT WARNING: 
- * 	The offsets used with 'lea' instructions
- * 	describe items of the 'padlock_cipher_data'
- * 	structure.
- */
-#define PADLOCK_XCRYPT_ASM(name,code)	\
-static void * __fastcall 		\
-	name (size_t cnt, void *cdata,	\
-	void *outp, const void *inp)	\
-{	_asm	mov	eax,edx		\
-	_asm	lea	edx,[eax+16]	\
-	_asm	lea	ebx,[eax+32]	\
-	_asm	mov	edi,outp	\
-	_asm	mov	esi,inp		\
-	REP_XCRYPT(code)		\
-}
-
-PADLOCK_XCRYPT_ASM(padlock_xcrypt_ecb,0xc8)
-PADLOCK_XCRYPT_ASM(padlock_xcrypt_cbc,0xd0)
-PADLOCK_XCRYPT_ASM(padlock_xcrypt_cfb,0xe0)
-PADLOCK_XCRYPT_ASM(padlock_xcrypt_ofb,0xe8)
-
-static int __fastcall
-padlock_xstore(void *outp,unsigned int code)
-{	_asm	mov	edi,ecx
-	_asm _emit 0x0f _asm _emit 0xa7 _asm _emit 0xc0
-}
-
-static void __fastcall
-padlock_reload_key(void)
-{	_asm pushfd _asm popfd		}
-
-static void __fastcall
-padlock_verify_context(void *cdata)
-{	_asm	{
-		pushfd
-		bt	DWORD PTR[esp],30
-		jnc	skip
-		cmp	ecx,padlock_saved_context
-		je	skip
-		popfd
-		sub	esp,4
-	skip:	add	esp,4
-		mov	padlock_saved_context,ecx
-		}
-}
-
-static int
-padlock_available(void)
-{	_asm	{
-		pushfd
-		pop	eax
-		mov	ecx,eax
-		xor	eax,1<<21
-		push	eax
-		popfd
-		pushfd
-		pop	eax
-		xor	eax,ecx
-		bt	eax,21
-		jnc	noluck
-		mov	eax,0
-		cpuid
-		xor	eax,eax
-		cmp	ebx,'tneC'
-		jne	noluck
-		cmp	edx,'Hrua'
-		jne	noluck
-		cmp	ecx,'slua'
-		jne	noluck
-		mov	eax,0xC0000000
-		cpuid
-		mov	edx,eax
-		xor	eax,eax
-		cmp	edx,0xC0000001
-		jb	noluck
-		mov	eax,0xC0000001
-		cpuid
-		xor	eax,eax
-		bt	edx,6
-		jnc	skip_a
-		bt	edx,7
-		jnc	skip_a
-		mov	padlock_use_ace,1
-		inc	eax
-	skip_a:	bt	edx,2
-		jnc	skip_r
-		bt	edx,3
-		jnc	skip_r
-		mov	padlock_use_rng,1
-		inc	eax
-	skip_r:
-	noluck:
-		}
-}
-
-static void __fastcall
-padlock_bswapl(void *key)
-{	_asm	{
-		pushfd
-		cld
-		mov	esi,ecx
-		mov	edi,ecx
-		mov	ecx,60
-	up:	lodsd
-		bswap	eax
-		stosd
-		loop	up
-		popfd
-		}
-}
-
-/* MS actually specifies status of Direction Flag and compiler even
- * manages to compile following as 'rep movsd' all by itself...
- */
-#define padlock_memcpy(o,i,n) ((unsigned char *)memcpy((o),(i),(n)&~3U))
-#endif
-
-/* ===== AES encryption/decryption ===== */
-#ifndef OPENSSL_NO_AES
-
-#if defined(NID_aes_128_cfb128) && ! defined (NID_aes_128_cfb)
-#define NID_aes_128_cfb	NID_aes_128_cfb128
-#endif
-
-#if defined(NID_aes_128_ofb128) && ! defined (NID_aes_128_ofb)
-#define NID_aes_128_ofb	NID_aes_128_ofb128
-#endif
-
-#if defined(NID_aes_192_cfb128) && ! defined (NID_aes_192_cfb)
-#define NID_aes_192_cfb	NID_aes_192_cfb128
-#endif
-
-#if defined(NID_aes_192_ofb128) && ! defined (NID_aes_192_ofb)
-#define NID_aes_192_ofb	NID_aes_192_ofb128
-#endif
-
-#if defined(NID_aes_256_cfb128) && ! defined (NID_aes_256_cfb)
-#define NID_aes_256_cfb	NID_aes_256_cfb128
-#endif
-
-#if defined(NID_aes_256_ofb128) && ! defined (NID_aes_256_ofb)
-#define NID_aes_256_ofb	NID_aes_256_ofb128
-#endif
-
-/* List of supported ciphers. */
-static int padlock_cipher_nids[] = {
-	NID_aes_128_ecb,
-	NID_aes_128_cbc,
-	NID_aes_128_cfb,
-	NID_aes_128_ofb,
-
-	NID_aes_192_ecb,
-	NID_aes_192_cbc,
-	NID_aes_192_cfb,
-	NID_aes_192_ofb,
-
-	NID_aes_256_ecb,
-	NID_aes_256_cbc,
-	NID_aes_256_cfb,
-	NID_aes_256_ofb,
-};
-static int padlock_cipher_nids_num = (sizeof(padlock_cipher_nids)/
-				      sizeof(padlock_cipher_nids[0]));
-
-/* Function prototypes ... */
-static int padlock_aes_init_key(EVP_CIPHER_CTX *ctx, const unsigned char *key,
-				const unsigned char *iv, int enc);
-static int padlock_aes_cipher(EVP_CIPHER_CTX *ctx, unsigned char *out,
-			      const unsigned char *in, size_t nbytes);
-
-#define NEAREST_ALIGNED(ptr) ( (unsigned char *)(ptr) +		\
-	( (0x10 - ((size_t)(ptr) & 0x0F)) & 0x0F )	)
-#define ALIGNED_CIPHER_DATA(ctx) ((struct padlock_cipher_data *)\
-	NEAREST_ALIGNED(ctx->cipher_data))
-
-#define EVP_CIPHER_block_size_ECB	AES_BLOCK_SIZE
-#define EVP_CIPHER_block_size_CBC	AES_BLOCK_SIZE
-#define EVP_CIPHER_block_size_OFB	1
-#define EVP_CIPHER_block_size_CFB	1
-
-/* Declaring so many ciphers by hand would be a pain.
-   Instead introduce a bit of preprocessor magic :-) */
-#define	DECLARE_AES_EVP(ksize,lmode,umode)	\
-static const EVP_CIPHER padlock_aes_##ksize##_##lmode = {	\
-	NID_aes_##ksize##_##lmode,		\
-	EVP_CIPHER_block_size_##umode,	\
-	AES_KEY_SIZE_##ksize,		\
-	AES_BLOCK_SIZE,			\
-	0 | EVP_CIPH_##umode##_MODE,	\
-	padlock_aes_init_key,		\
-	padlock_aes_cipher,		\
-	NULL,				\
-	sizeof(struct padlock_cipher_data) + 16,	\
-	EVP_CIPHER_set_asn1_iv,		\
-	EVP_CIPHER_get_asn1_iv,		\
-	NULL,				\
-	NULL				\
-}
-
-DECLARE_AES_EVP(128,ecb,ECB);
-DECLARE_AES_EVP(128,cbc,CBC);
-DECLARE_AES_EVP(128,cfb,CFB);
-DECLARE_AES_EVP(128,ofb,OFB);
-
-DECLARE_AES_EVP(192,ecb,ECB);
-DECLARE_AES_EVP(192,cbc,CBC);
-DECLARE_AES_EVP(192,cfb,CFB);
-DECLARE_AES_EVP(192,ofb,OFB);
-
-DECLARE_AES_EVP(256,ecb,ECB);
-DECLARE_AES_EVP(256,cbc,CBC);
-DECLARE_AES_EVP(256,cfb,CFB);
-DECLARE_AES_EVP(256,ofb,OFB);
-
-static int
-padlock_ciphers (ENGINE *e, const EVP_CIPHER **cipher, const int **nids, int nid)
-{
-	/* No specific cipher => return a list of supported nids ... */
-	if (!cipher) {
-		*nids = padlock_cipher_nids;
-		return padlock_cipher_nids_num;
-	}
-
-	/* ... or the requested "cipher" otherwise */
-	switch (nid) {
-	  case NID_aes_128_ecb:
-	    *cipher = &padlock_aes_128_ecb;
-	    break;
-	  case NID_aes_128_cbc:
-	    *cipher = &padlock_aes_128_cbc;
-	    break;
-	  case NID_aes_128_cfb:
-	    *cipher = &padlock_aes_128_cfb;
-	    break;
-	  case NID_aes_128_ofb:
-	    *cipher = &padlock_aes_128_ofb;
-	    break;
-
-	  case NID_aes_192_ecb:
-	    *cipher = &padlock_aes_192_ecb;
-	    break;
-	  case NID_aes_192_cbc:
-	    *cipher = &padlock_aes_192_cbc;
-	    break;
-	  case NID_aes_192_cfb:
-	    *cipher = &padlock_aes_192_cfb;
-	    break;
-	  case NID_aes_192_ofb:
-	    *cipher = &padlock_aes_192_ofb;
-	    break;
-
-	  case NID_aes_256_ecb:
-	    *cipher = &padlock_aes_256_ecb;
-	    break;
-	  case NID_aes_256_cbc:
-	    *cipher = &padlock_aes_256_cbc;
-	    break;
-	  case NID_aes_256_cfb:
-	    *cipher = &padlock_aes_256_cfb;
-	    break;
-	  case NID_aes_256_ofb:
-	    *cipher = &padlock_aes_256_ofb;
-	    break;
-
-	  default:
-	    /* Sorry, we don't support this NID */
-	    *cipher = NULL;
-	    return 0;
-	}
-
-	return 1;
-}
-
-/* Prepare the encryption key for PadLock usage */
-static int
-padlock_aes_init_key (EVP_CIPHER_CTX *ctx, const unsigned char *key,
-		      const unsigned char *iv, int enc)
-{
-	struct padlock_cipher_data *cdata;
-	int key_len = EVP_CIPHER_CTX_key_length(ctx) * 8;
-
-	if (key==NULL) return 0;	/* ERROR */
-
-	cdata = ALIGNED_CIPHER_DATA(ctx);
-	memset(cdata, 0, sizeof(struct padlock_cipher_data));
-
-	/* Prepare Control word. */
-	if (EVP_CIPHER_CTX_mode(ctx) == EVP_CIPH_OFB_MODE)
-		cdata->cword.b.encdec = 0;
-	else
-		cdata->cword.b.encdec = (ctx->encrypt == 0);
-	cdata->cword.b.rounds = 10 + (key_len - 128) / 32;
-	cdata->cword.b.ksize = (key_len - 128) / 64;
-
-	switch(key_len) {
-		case 128:
-			/* PadLock can generate an extended key for
-			   AES128 in hardware */
-			memcpy(cdata->ks.rd_key, key, AES_KEY_SIZE_128);
-			cdata->cword.b.keygen = 0;
-			break;
-
-		case 192:
-		case 256:
-			/* Generate an extended AES key in software.
-			   Needed for AES192/AES256 */
-			/* Well, the above applies to Stepping 8 CPUs
-			   and is listed as hardware errata. They most
-			   likely will fix it at some point and then
-			   a check for stepping would be due here. */
-			if (EVP_CIPHER_CTX_mode(ctx) == EVP_CIPH_CFB_MODE ||
-			    EVP_CIPHER_CTX_mode(ctx) == EVP_CIPH_OFB_MODE ||
-			    enc)
-				AES_set_encrypt_key(key, key_len, &cdata->ks);
-			else
-				AES_set_decrypt_key(key, key_len, &cdata->ks);
-#ifndef AES_ASM
-			/* OpenSSL C functions use byte-swapped extended key. */
-			padlock_bswapl(&cdata->ks);
-#endif
-			cdata->cword.b.keygen = 1;
-			break;
-
-		default:
-			/* ERROR */
-			return 0;
-	}
-
-	/*
-	 * This is done to cover for cases when user reuses the
-	 * context for new key. The catch is that if we don't do
-	 * this, padlock_eas_cipher might proceed with old key...
-	 */
-	padlock_reload_key ();
-
-	return 1;
-}
-
-/* 
- * Simplified version of padlock_aes_cipher() used when
- * 1) both input and output buffers are at aligned addresses.
- * or when
- * 2) running on a newer CPU that doesn't require aligned buffers.
- */
-static int
-padlock_aes_cipher_omnivorous(EVP_CIPHER_CTX *ctx, unsigned char *out_arg,
-		const unsigned char *in_arg, size_t nbytes)
-{
-	struct padlock_cipher_data *cdata;
-	void  *iv;
-
-	cdata = ALIGNED_CIPHER_DATA(ctx);
-	padlock_verify_context(cdata);
-
-	switch (EVP_CIPHER_CTX_mode(ctx)) {
-	case EVP_CIPH_ECB_MODE:
-		padlock_xcrypt_ecb(nbytes/AES_BLOCK_SIZE, cdata, out_arg, in_arg);
-		break;
-
-	case EVP_CIPH_CBC_MODE:
-		memcpy(cdata->iv, ctx->iv, AES_BLOCK_SIZE);
-		iv = padlock_xcrypt_cbc(nbytes/AES_BLOCK_SIZE, cdata, out_arg, in_arg);
-		memcpy(ctx->iv, iv, AES_BLOCK_SIZE);
-		break;
-
-	case EVP_CIPH_CFB_MODE:
-		memcpy(cdata->iv, ctx->iv, AES_BLOCK_SIZE);
-		iv = padlock_xcrypt_cfb(nbytes/AES_BLOCK_SIZE, cdata, out_arg, in_arg);
-		memcpy(ctx->iv, iv, AES_BLOCK_SIZE);
-		break;
-
-	case EVP_CIPH_OFB_MODE:
-		memcpy(cdata->iv, ctx->iv, AES_BLOCK_SIZE);
-		padlock_xcrypt_ofb(nbytes/AES_BLOCK_SIZE, cdata, out_arg, in_arg);
-		memcpy(ctx->iv, cdata->iv, AES_BLOCK_SIZE);
-		break;
-
-	default:
-		return 0;
-	}
-
-	memset(cdata->iv, 0, AES_BLOCK_SIZE);
-
-	return 1;
-}
-
-#ifndef  PADLOCK_CHUNK
-# define PADLOCK_CHUNK	512	/* Must be a power of 2 larger than 16 */
-#endif
-#if PADLOCK_CHUNK<16 || PADLOCK_CHUNK&(PADLOCK_CHUNK-1)
-# error "insane PADLOCK_CHUNK..."
-#endif
-
-/* Re-align the arguments to 16-Bytes boundaries and run the 
-   encryption function itself. This function is not AES-specific. */
-static int
-padlock_aes_cipher(EVP_CIPHER_CTX *ctx, unsigned char *out_arg,
-		   const unsigned char *in_arg, size_t nbytes)
-{
-	struct padlock_cipher_data *cdata;
-	const  void *inp;
-	unsigned char  *out;
-	void  *iv;
-	int    inp_misaligned, out_misaligned, realign_in_loop;
-	size_t chunk, allocated=0;
-
-	/* ctx->num is maintained in byte-oriented modes,
-	   such as CFB and OFB... */
-	if ((chunk = ctx->num)) { /* borrow chunk variable */
-		unsigned char *ivp=ctx->iv;
-
-		switch (EVP_CIPHER_CTX_mode(ctx)) {
-		case EVP_CIPH_CFB_MODE:
-			if (chunk >= AES_BLOCK_SIZE)
-				return 0; /* bogus value */
-
-			if (ctx->encrypt)
-				while (chunk<AES_BLOCK_SIZE && nbytes!=0) {
-					ivp[chunk] = *(out_arg++) = *(in_arg++) ^ ivp[chunk];
-					chunk++, nbytes--;
-				}
-			else	while (chunk<AES_BLOCK_SIZE && nbytes!=0) {
-					unsigned char c = *(in_arg++);
-					*(out_arg++) = c ^ ivp[chunk];
-					ivp[chunk++] = c, nbytes--;
-				}
-
-			ctx->num = chunk%AES_BLOCK_SIZE;
-			break;
-		case EVP_CIPH_OFB_MODE:
-			if (chunk >= AES_BLOCK_SIZE)
-				return 0; /* bogus value */
-
-			while (chunk<AES_BLOCK_SIZE && nbytes!=0) {
-				*(out_arg++) = *(in_arg++) ^ ivp[chunk];
-				chunk++, nbytes--;
-			}
-
-			ctx->num = chunk%AES_BLOCK_SIZE;
-			break;
-		}
-	}
-
-	if (nbytes == 0)
-		return 1;
-#if 0
-	if (nbytes % AES_BLOCK_SIZE)
-		return 0; /* are we expected to do tail processing? */
-#else
-	/* nbytes is always multiple of AES_BLOCK_SIZE in ECB and CBC
-	   modes and arbitrary value in byte-oriented modes, such as
-	   CFB and OFB... */
-#endif
-
-	/* VIA promises CPUs that won't require alignment in the future.
-	   For now padlock_aes_align_required is initialized to 1 and
-	   the condition is never met... */
-	/* C7 core is capable to manage unaligned input in non-ECB[!]
-	   mode, but performance penalties appear to be approximately
-	   same as for software alignment below or ~3x. They promise to
-	   improve it in the future, but for now we can just as well
-	   pretend that it can only handle aligned input... */
-	if (!padlock_aes_align_required && (nbytes%AES_BLOCK_SIZE)==0)
-		return padlock_aes_cipher_omnivorous(ctx, out_arg, in_arg, nbytes);
-
-	inp_misaligned = (((size_t)in_arg) & 0x0F);
-	out_misaligned = (((size_t)out_arg) & 0x0F);
-
-	/* Note that even if output is aligned and input not,
-	 * I still prefer to loop instead of copy the whole
-	 * input and then encrypt in one stroke. This is done
-	 * in order to improve L1 cache utilization... */
-	realign_in_loop = out_misaligned|inp_misaligned;
-
-	if (!realign_in_loop && (nbytes%AES_BLOCK_SIZE)==0)
-		return padlock_aes_cipher_omnivorous(ctx, out_arg, in_arg, nbytes);
-
-	/* this takes one "if" out of the loops */
-	chunk  = nbytes;
-	chunk %= PADLOCK_CHUNK;
-	if (chunk==0) chunk = PADLOCK_CHUNK;
-
-	if (out_misaligned) {
-		/* optmize for small input */
-		allocated = (chunk<nbytes?PADLOCK_CHUNK:nbytes);
-		out = alloca(0x10 + allocated);
-		out = NEAREST_ALIGNED(out);
-	}
-	else
-		out = out_arg;
-
-	cdata = ALIGNED_CIPHER_DATA(ctx);
-	padlock_verify_context(cdata);
-
-	switch (EVP_CIPHER_CTX_mode(ctx)) {
-	case EVP_CIPH_ECB_MODE:
-		do	{
-			if (inp_misaligned)
-				inp = padlock_memcpy(out, in_arg, chunk);
-			else
-				inp = in_arg;
-			in_arg += chunk;
-
-			padlock_xcrypt_ecb(chunk/AES_BLOCK_SIZE, cdata, out, inp);
-
-			if (out_misaligned)
-				out_arg = padlock_memcpy(out_arg, out, chunk) + chunk;
-			else
-				out     = out_arg+=chunk;
-
-			nbytes -= chunk;
-			chunk   = PADLOCK_CHUNK;
-		} while (nbytes);
-		break;
-
-	case EVP_CIPH_CBC_MODE:
-		memcpy(cdata->iv, ctx->iv, AES_BLOCK_SIZE);
-		goto cbc_shortcut;
-		do	{
-			if (iv != cdata->iv)
-				memcpy(cdata->iv, iv, AES_BLOCK_SIZE);
-			chunk = PADLOCK_CHUNK;
-		cbc_shortcut: /* optimize for small input */
-			if (inp_misaligned)
-				inp = padlock_memcpy(out, in_arg, chunk);
-			else
-				inp = in_arg;
-			in_arg += chunk;
-
-			iv = padlock_xcrypt_cbc(chunk/AES_BLOCK_SIZE, cdata, out, inp);
-
-			if (out_misaligned)
-				out_arg = padlock_memcpy(out_arg, out, chunk) + chunk;
-			else
-				out     = out_arg+=chunk;
-
-		} while (nbytes -= chunk);
-		memcpy(ctx->iv, iv, AES_BLOCK_SIZE);
-		break;
-
-	case EVP_CIPH_CFB_MODE:
-		memcpy (iv = cdata->iv, ctx->iv, AES_BLOCK_SIZE);
-		chunk &= ~(AES_BLOCK_SIZE-1);
-		if (chunk)	goto cfb_shortcut;
-		else		goto cfb_skiploop;
-		do	{
-			if (iv != cdata->iv)
-				memcpy(cdata->iv, iv, AES_BLOCK_SIZE);
-			chunk = PADLOCK_CHUNK;
-		cfb_shortcut: /* optimize for small input */
-			if (inp_misaligned)
-				inp = padlock_memcpy(out, in_arg, chunk);
-			else
-				inp = in_arg;
-			in_arg += chunk;
-
-			iv = padlock_xcrypt_cfb(chunk/AES_BLOCK_SIZE, cdata, out, inp);
-
-			if (out_misaligned)
-				out_arg = padlock_memcpy(out_arg, out, chunk) + chunk;
-			else
-				out     = out_arg+=chunk;
-
-			nbytes -= chunk;
-		} while (nbytes >= AES_BLOCK_SIZE);
-
-		cfb_skiploop:
-		if (nbytes) {
-			unsigned char *ivp = cdata->iv;
-
-			if (iv != ivp) {
-				memcpy(ivp, iv, AES_BLOCK_SIZE);
-				iv = ivp;
-			}
-			ctx->num = nbytes;
-			if (cdata->cword.b.encdec) {
-				cdata->cword.b.encdec=0;
-				padlock_reload_key();
-				padlock_xcrypt_ecb(1,cdata,ivp,ivp);
-				cdata->cword.b.encdec=1;
-				padlock_reload_key();
-				while(nbytes) {
-					unsigned char c = *(in_arg++);
-					*(out_arg++) = c ^ *ivp;
-					*(ivp++) = c, nbytes--;
-				}
-			}
-			else {	padlock_reload_key();
-				padlock_xcrypt_ecb(1,cdata,ivp,ivp);
-				padlock_reload_key();
-				while (nbytes) {
-					*ivp = *(out_arg++) = *(in_arg++) ^ *ivp;
-					ivp++, nbytes--;
-				}
-			}
-		}
-
-		memcpy(ctx->iv, iv, AES_BLOCK_SIZE);
-		break;
-
-	case EVP_CIPH_OFB_MODE:
-		memcpy(cdata->iv, ctx->iv, AES_BLOCK_SIZE);
-		chunk &= ~(AES_BLOCK_SIZE-1);
-		if (chunk) do	{
-			if (inp_misaligned)
-				inp = padlock_memcpy(out, in_arg, chunk);
-			else
-				inp = in_arg;
-			in_arg += chunk;
-
-			padlock_xcrypt_ofb(chunk/AES_BLOCK_SIZE, cdata, out, inp);
-
-			if (out_misaligned)
-				out_arg = padlock_memcpy(out_arg, out, chunk) + chunk;
-			else
-				out     = out_arg+=chunk;
-
-			nbytes -= chunk;
-			chunk   = PADLOCK_CHUNK;
-		} while (nbytes >= AES_BLOCK_SIZE);
-
-		if (nbytes) {
-			unsigned char *ivp = cdata->iv;
-
-			ctx->num = nbytes;
-			padlock_reload_key();	/* empirically found */
-			padlock_xcrypt_ecb(1,cdata,ivp,ivp);
-			padlock_reload_key();	/* empirically found */
-			while (nbytes) {
-				*(out_arg++) = *(in_arg++) ^ *ivp;
-				ivp++, nbytes--;
-			}
-		}
-
-		memcpy(ctx->iv, cdata->iv, AES_BLOCK_SIZE);
-		break;
-
-	default:
-		return 0;
-	}
-
-	/* Clean the realign buffer if it was used */
-	if (out_misaligned) {
-		volatile unsigned long *p=(void *)out;
-		size_t   n = allocated/sizeof(*p);
-		while (n--) *p++=0;
-	}
-
-	memset(cdata->iv, 0, AES_BLOCK_SIZE);
-
-	return 1;
-}
-
-#endif /* OPENSSL_NO_AES */
-
-/* ===== Random Number Generator ===== */
-/*
- * This code is not engaged. The reason is that it does not comply
- * with recommendations for VIA RNG usage for secure applications
- * (posted at http://www.via.com.tw/en/viac3/c3.jsp) nor does it
- * provide meaningful error control...
- */
-/* Wrapper that provides an interface between the API and 
-   the raw PadLock RNG */
-static int
-padlock_rand_bytes(unsigned char *output, int count)
-{
-	unsigned int eax, buf;
-
-	while (count >= 8) {
-		eax = padlock_xstore(output, 0);
-		if (!(eax&(1<<6)))	return 0; /* RNG disabled */
-		/* this ---vv--- covers DC bias, Raw Bits and String Filter */
-		if (eax&(0x1F<<10))	return 0;
-		if ((eax&0x1F)==0)	continue; /* no data, retry... */
-		if ((eax&0x1F)!=8)	return 0; /* fatal failure...  */
-		output += 8;
-		count  -= 8;
-	}
-	while (count > 0) {
-		eax = padlock_xstore(&buf, 3);
-		if (!(eax&(1<<6)))	return 0; /* RNG disabled */
-		/* this ---vv--- covers DC bias, Raw Bits and String Filter */
-		if (eax&(0x1F<<10))	return 0;
-		if ((eax&0x1F)==0)	continue; /* no data, retry... */
-		if ((eax&0x1F)!=1)	return 0; /* fatal failure...  */
-		*output++ = (unsigned char)buf;
-		count--;
-	}
-	*(volatile unsigned int *)&buf=0;
-
-	return 1;
-}
-
-/* Dummy but necessary function */
-static int
-padlock_rand_status(void)
-{
-	return 1;
-}
-
-/* Prepare structure for registration */
-static RAND_METHOD padlock_rand = {
-	NULL,			/* seed */
-	padlock_rand_bytes,	/* bytes */
-	NULL,			/* cleanup */
-	NULL,			/* add */
-	padlock_rand_bytes,	/* pseudorand */
-	padlock_rand_status,	/* rand status */
-};
-
-#endif /* COMPILE_HW_PADLOCK */
-
-#endif /* !OPENSSL_NO_HW_PADLOCK */
-#endif /* !OPENSSL_NO_HW */
diff --git a/crypto/openssl/crypto/engine/eng_pkey.c b/crypto/openssl/crypto/engine/eng_pkey.c
deleted file mode 100644
index bc8b21abec5a..000000000000
--- a/crypto/openssl/crypto/engine/eng_pkey.c
+++ /dev/null
@@ -1,154 +0,0 @@
-/* crypto/engine/eng_pkey.c */
-/* ====================================================================
- * Copyright (c) 1999-2001 The OpenSSL Project.  All rights reserved.
- *
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions
- * are met:
- *
- * 1. Redistributions of source code must retain the above copyright
- *    notice, this list of conditions and the following disclaimer. 
- *
- * 2. Redistributions in binary form must reproduce the above copyright
- *    notice, this list of conditions and the following disclaimer in
- *    the documentation and/or other materials provided with the
- *    distribution.
- *
- * 3. All advertising materials mentioning features or use of this
- *    software must display the following acknowledgment:
- *    "This product includes software developed by the OpenSSL Project
- *    for use in the OpenSSL Toolkit. (http://www.OpenSSL.org/)"
- *
- * 4. The names "OpenSSL Toolkit" and "OpenSSL Project" must not be used to
- *    endorse or promote products derived from this software without
- *    prior written permission. For written permission, please contact
- *    licensing@OpenSSL.org.
- *
- * 5. Products derived from this software may not be called "OpenSSL"
- *    nor may "OpenSSL" appear in their names without prior written
- *    permission of the OpenSSL Project.
- *
- * 6. Redistributions of any form whatsoever must retain the following
- *    acknowledgment:
- *    "This product includes software developed by the OpenSSL Project
- *    for use in the OpenSSL Toolkit (http://www.OpenSSL.org/)"
- *
- * THIS SOFTWARE IS PROVIDED BY THE OpenSSL PROJECT ``AS IS'' AND ANY
- * EXPRESSED OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
- * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR
- * PURPOSE ARE DISCLAIMED.  IN NO EVENT SHALL THE OpenSSL PROJECT OR
- * ITS CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
- * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
- * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
- * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
- * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
- * STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
- * ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED
- * OF THE POSSIBILITY OF SUCH DAMAGE.
- * ====================================================================
- *
- * This product includes cryptographic software written by Eric Young
- * (eay@cryptsoft.com).  This product includes software written by Tim
- * Hudson (tjh@cryptsoft.com).
- *
- */
-
-#include "eng_int.h"
-
-/* Basic get/set stuff */
-
-int ENGINE_set_load_privkey_function(ENGINE *e, ENGINE_LOAD_KEY_PTR loadpriv_f)
-	{
-	e->load_privkey = loadpriv_f;
-	return 1;
-	}
-
-int ENGINE_set_load_pubkey_function(ENGINE *e, ENGINE_LOAD_KEY_PTR loadpub_f)
-	{
-	e->load_pubkey = loadpub_f;
-	return 1;
-	}
-
-ENGINE_LOAD_KEY_PTR ENGINE_get_load_privkey_function(const ENGINE *e)
-	{
-	return e->load_privkey;
-	}
-
-ENGINE_LOAD_KEY_PTR ENGINE_get_load_pubkey_function(const ENGINE *e)
-	{
-	return e->load_pubkey;
-	}
-
-/* API functions to load public/private keys */
-
-EVP_PKEY *ENGINE_load_private_key(ENGINE *e, const char *key_id,
-	UI_METHOD *ui_method, void *callback_data)
-	{
-	EVP_PKEY *pkey;
-
-	if(e == NULL)
-		{
-		ENGINEerr(ENGINE_F_ENGINE_LOAD_PRIVATE_KEY,
-			ERR_R_PASSED_NULL_PARAMETER);
-		return 0;
-		}
-	CRYPTO_w_lock(CRYPTO_LOCK_ENGINE);
-	if(e->funct_ref == 0)
-		{
-		CRYPTO_w_unlock(CRYPTO_LOCK_ENGINE);
-		ENGINEerr(ENGINE_F_ENGINE_LOAD_PRIVATE_KEY,
-			ENGINE_R_NOT_INITIALISED);
-		return 0;
-		}
-	CRYPTO_w_unlock(CRYPTO_LOCK_ENGINE);
-	if (!e->load_privkey)
-		{
-		ENGINEerr(ENGINE_F_ENGINE_LOAD_PRIVATE_KEY,
-			ENGINE_R_NO_LOAD_FUNCTION);
-		return 0;
-		}
-	pkey = e->load_privkey(e, key_id, ui_method, callback_data);
-	if (!pkey)
-		{
-		ENGINEerr(ENGINE_F_ENGINE_LOAD_PRIVATE_KEY,
-			ENGINE_R_FAILED_LOADING_PRIVATE_KEY);
-		return 0;
-		}
-	return pkey;
-	}
-
-EVP_PKEY *ENGINE_load_public_key(ENGINE *e, const char *key_id,
-	UI_METHOD *ui_method, void *callback_data)
-	{
-	EVP_PKEY *pkey;
-
-	if(e == NULL)
-		{
-		ENGINEerr(ENGINE_F_ENGINE_LOAD_PUBLIC_KEY,
-			ERR_R_PASSED_NULL_PARAMETER);
-		return 0;
-		}
-	CRYPTO_w_lock(CRYPTO_LOCK_ENGINE);
-	if(e->funct_ref == 0)
-		{
-		CRYPTO_w_unlock(CRYPTO_LOCK_ENGINE);
-		ENGINEerr(ENGINE_F_ENGINE_LOAD_PUBLIC_KEY,
-			ENGINE_R_NOT_INITIALISED);
-		return 0;
-		}
-	CRYPTO_w_unlock(CRYPTO_LOCK_ENGINE);
-	if (!e->load_pubkey)
-		{
-		ENGINEerr(ENGINE_F_ENGINE_LOAD_PUBLIC_KEY,
-			ENGINE_R_NO_LOAD_FUNCTION);
-		return 0;
-		}
-	pkey = e->load_pubkey(e, key_id, ui_method, callback_data);
-	if (!pkey)
-		{
-		ENGINEerr(ENGINE_F_ENGINE_LOAD_PUBLIC_KEY,
-			ENGINE_R_FAILED_LOADING_PUBLIC_KEY);
-		return 0;
-		}
-	return pkey;
-	}
diff --git a/crypto/openssl/crypto/engine/eng_table.c b/crypto/openssl/crypto/engine/eng_table.c
deleted file mode 100644
index a83c3899ee11..000000000000
--- a/crypto/openssl/crypto/engine/eng_table.c
+++ /dev/null
@@ -1,315 +0,0 @@
-/* ====================================================================
- * Copyright (c) 2001 The OpenSSL Project.  All rights reserved.
- *
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions
- * are met:
- *
- * 1. Redistributions of source code must retain the above copyright
- *    notice, this list of conditions and the following disclaimer. 
- *
- * 2. Redistributions in binary form must reproduce the above copyright
- *    notice, this list of conditions and the following disclaimer in
- *    the documentation and/or other materials provided with the
- *    distribution.
- *
- * 3. All advertising materials mentioning features or use of this
- *    software must display the following acknowledgment:
- *    "This product includes software developed by the OpenSSL Project
- *    for use in the OpenSSL Toolkit. (http://www.OpenSSL.org/)"
- *
- * 4. The names "OpenSSL Toolkit" and "OpenSSL Project" must not be used to
- *    endorse or promote products derived from this software without
- *    prior written permission. For written permission, please contact
- *    licensing@OpenSSL.org.
- *
- * 5. Products derived from this software may not be called "OpenSSL"
- *    nor may "OpenSSL" appear in their names without prior written
- *    permission of the OpenSSL Project.
- *
- * 6. Redistributions of any form whatsoever must retain the following
- *    acknowledgment:
- *    "This product includes software developed by the OpenSSL Project
- *    for use in the OpenSSL Toolkit (http://www.OpenSSL.org/)"
- *
- * THIS SOFTWARE IS PROVIDED BY THE OpenSSL PROJECT ``AS IS'' AND ANY
- * EXPRESSED OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
- * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR
- * PURPOSE ARE DISCLAIMED.  IN NO EVENT SHALL THE OpenSSL PROJECT OR
- * ITS CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
- * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
- * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
- * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
- * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
- * STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
- * ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED
- * OF THE POSSIBILITY OF SUCH DAMAGE.
- * ====================================================================
- *
- * This product includes cryptographic software written by Eric Young
- * (eay@cryptsoft.com).  This product includes software written by Tim
- * Hudson (tjh@cryptsoft.com).
- *
- */
-
-#include "cryptlib.h"
-#include <openssl/evp.h>
-#include <openssl/lhash.h>
-#include "eng_int.h"
-
-/* The type of the items in the table */
-typedef struct st_engine_pile
-	{
-	/* The 'nid' of this algorithm/mode */
-	int nid;
-	/* ENGINEs that implement this algorithm/mode. */
-	STACK_OF(ENGINE) *sk;
-	/* The default ENGINE to perform this algorithm/mode. */
-	ENGINE *funct;
-	/* Zero if 'sk' is newer than the cached 'funct', non-zero otherwise */
-	int uptodate;
-	} ENGINE_PILE;
-
-/* The type exposed in eng_int.h */
-struct st_engine_table
-	{
-	LHASH piles;
-	}; /* ENGINE_TABLE */
-
-/* Global flags (ENGINE_TABLE_FLAG_***). */
-static unsigned int table_flags = 0;
-
-/* API function manipulating 'table_flags' */
-unsigned int ENGINE_get_table_flags(void)
-	{
-	return table_flags;
-	}
-void ENGINE_set_table_flags(unsigned int flags)
-	{
-	table_flags = flags;
-	}
-
-/* Internal functions for the "piles" hash table */
-static unsigned long engine_pile_hash(const ENGINE_PILE *c)
-	{
-	return c->nid;
-	}
-static int engine_pile_cmp(const ENGINE_PILE *a, const ENGINE_PILE *b)
-	{
-	return a->nid - b->nid;
-	}
-static IMPLEMENT_LHASH_HASH_FN(engine_pile_hash, const ENGINE_PILE *)
-static IMPLEMENT_LHASH_COMP_FN(engine_pile_cmp, const ENGINE_PILE *)
-static int int_table_check(ENGINE_TABLE **t, int create)
-	{
-	LHASH *lh;
-	if(*t) return 1;
-	if(!create) return 0;
-	if((lh = lh_new(LHASH_HASH_FN(engine_pile_hash),
-			LHASH_COMP_FN(engine_pile_cmp))) == NULL)
-		return 0;
-	*t = (ENGINE_TABLE *)lh;
-	return 1;
-	}
-
-/* Privately exposed (via eng_int.h) functions for adding and/or removing
- * ENGINEs from the implementation table */
-int engine_table_register(ENGINE_TABLE **table, ENGINE_CLEANUP_CB *cleanup,
-		ENGINE *e, const int *nids, int num_nids, int setdefault)
-	{
-	int ret = 0, added = 0;
-	ENGINE_PILE tmplate, *fnd;
-	CRYPTO_w_lock(CRYPTO_LOCK_ENGINE);
-	if(!(*table))
-		added = 1;
-	if(!int_table_check(table, 1))
-		goto end;
-	if(added)
-		/* The cleanup callback needs to be added */
-		engine_cleanup_add_first(cleanup);
-	while(num_nids--)
-		{
-		tmplate.nid = *nids;
-		fnd = lh_retrieve(&(*table)->piles, &tmplate);
-		if(!fnd)
-			{
-			fnd = OPENSSL_malloc(sizeof(ENGINE_PILE));
-			if(!fnd) goto end;
-			fnd->uptodate = 0;
-			fnd->nid = *nids;
-			fnd->sk = sk_ENGINE_new_null();
-			if(!fnd->sk)
-				{
-				OPENSSL_free(fnd);
-				goto end;
-				}
-			fnd->funct = NULL;
-			lh_insert(&(*table)->piles, fnd);
-			}
-		/* A registration shouldn't add duplciate entries */
-		sk_ENGINE_delete_ptr(fnd->sk, e);
-		/* if 'setdefault', this ENGINE goes to the head of the list */
-		if(!sk_ENGINE_push(fnd->sk, e))
-			goto end;
-		/* "touch" this ENGINE_PILE */
-		fnd->uptodate = 1;
-		if(setdefault)
-			{
-			if(!engine_unlocked_init(e))
-				{
-				ENGINEerr(ENGINE_F_ENGINE_TABLE_REGISTER,
-						ENGINE_R_INIT_FAILED);
-				goto end;
-				}
-			if(fnd->funct)
-				engine_unlocked_finish(fnd->funct, 0);
-			fnd->funct = e;
-			}
-		nids++;
-		}
-	ret = 1;
-end:
-	CRYPTO_w_unlock(CRYPTO_LOCK_ENGINE);
-	return ret;
-	}
-static void int_unregister_cb(ENGINE_PILE *pile, ENGINE *e)
-	{
-	int n;
-	/* Iterate the 'c->sk' stack removing any occurance of 'e' */
-	while((n = sk_ENGINE_find(pile->sk, e)) >= 0)
-		{
-		sk_ENGINE_delete(pile->sk, n);
-		/* "touch" this ENGINE_CIPHER */
-		pile->uptodate = 1;
-		}
-	if(pile->funct == e)
-		{
-		engine_unlocked_finish(e, 0);
-		pile->funct = NULL;
-		}
-	}
-static IMPLEMENT_LHASH_DOALL_ARG_FN(int_unregister_cb,ENGINE_PILE *,ENGINE *)
-void engine_table_unregister(ENGINE_TABLE **table, ENGINE *e)
-	{
-	CRYPTO_w_lock(CRYPTO_LOCK_ENGINE);
-	if(int_table_check(table, 0))
-		lh_doall_arg(&(*table)->piles,
-			LHASH_DOALL_ARG_FN(int_unregister_cb), e);
-	CRYPTO_w_unlock(CRYPTO_LOCK_ENGINE);
-	}
-
-static void int_cleanup_cb(ENGINE_PILE *p)
-	{
-	sk_ENGINE_free(p->sk);
-	if(p->funct)
-		engine_unlocked_finish(p->funct, 0);
-	OPENSSL_free(p);
-	}
-static IMPLEMENT_LHASH_DOALL_FN(int_cleanup_cb,ENGINE_PILE *)
-void engine_table_cleanup(ENGINE_TABLE **table)
-	{
-	CRYPTO_w_lock(CRYPTO_LOCK_ENGINE);
-	if(*table)
-		{
-		lh_doall(&(*table)->piles, LHASH_DOALL_FN(int_cleanup_cb));
-		lh_free(&(*table)->piles);
-		*table = NULL;
-		}
-	CRYPTO_w_unlock(CRYPTO_LOCK_ENGINE);
-	}
-
-/* return a functional reference for a given 'nid' */
-#ifndef ENGINE_TABLE_DEBUG
-ENGINE *engine_table_select(ENGINE_TABLE **table, int nid)
-#else
-ENGINE *engine_table_select_tmp(ENGINE_TABLE **table, int nid, const char *f, int l)
-#endif
-	{
-	ENGINE *ret = NULL;
-	ENGINE_PILE tmplate, *fnd=NULL;
-	int initres, loop = 0;
-
-	if(!(*table))
-		{
-#ifdef ENGINE_TABLE_DEBUG
-		fprintf(stderr, "engine_table_dbg: %s:%d, nid=%d, nothing "
-			"registered!\n", f, l, nid);
-#endif
-		return NULL;
-		}
-	CRYPTO_w_lock(CRYPTO_LOCK_ENGINE);
-	/* Check again inside the lock otherwise we could race against cleanup
-	 * operations. But don't worry about a fprintf(stderr). */
-	if(!int_table_check(table, 0)) goto end;
-	tmplate.nid = nid;
-	fnd = lh_retrieve(&(*table)->piles, &tmplate);
-	if(!fnd) goto end;
-	if(fnd->funct && engine_unlocked_init(fnd->funct))
-		{
-#ifdef ENGINE_TABLE_DEBUG
-		fprintf(stderr, "engine_table_dbg: %s:%d, nid=%d, using "
-			"ENGINE '%s' cached\n", f, l, nid, fnd->funct->id);
-#endif
-		ret = fnd->funct;
-		goto end;
-		}
-	if(fnd->uptodate)
-		{
-		ret = fnd->funct;
-		goto end;
-		}
-trynext:
-	ret = sk_ENGINE_value(fnd->sk, loop++);
-	if(!ret)
-		{
-#ifdef ENGINE_TABLE_DEBUG
-		fprintf(stderr, "engine_table_dbg: %s:%d, nid=%d, no "
-				"registered implementations would initialise\n",
-				f, l, nid);
-#endif
-		goto end;
-		}
-	/* Try to initialise the ENGINE? */
-	if((ret->funct_ref > 0) || !(table_flags & ENGINE_TABLE_FLAG_NOINIT))
-		initres = engine_unlocked_init(ret);
-	else
-		initres = 0;
-	if(initres)
-		{
-		/* Update 'funct' */
-		if((fnd->funct != ret) && engine_unlocked_init(ret))
-			{
-			/* If there was a previous default we release it. */
-			if(fnd->funct)
-				engine_unlocked_finish(fnd->funct, 0);
-			fnd->funct = ret;
-#ifdef ENGINE_TABLE_DEBUG
-			fprintf(stderr, "engine_table_dbg: %s:%d, nid=%d, "
-				"setting default to '%s'\n", f, l, nid, ret->id);
-#endif
-			}
-#ifdef ENGINE_TABLE_DEBUG
-		fprintf(stderr, "engine_table_dbg: %s:%d, nid=%d, using "
-				"newly initialised '%s'\n", f, l, nid, ret->id);
-#endif
-		goto end;
-		}
-	goto trynext;
-end:
-	/* If it failed, it is unlikely to succeed again until some future
-	 * registrations have taken place. In all cases, we cache. */
-	if(fnd) fnd->uptodate = 1;
-#ifdef ENGINE_TABLE_DEBUG
-	if(ret)
-		fprintf(stderr, "engine_table_dbg: %s:%d, nid=%d, caching "
-				"ENGINE '%s'\n", f, l, nid, ret->id);
-	else
-		fprintf(stderr, "engine_table_dbg: %s:%d, nid=%d, caching "
-				"'no matching ENGINE'\n", f, l, nid);
-#endif
-	CRYPTO_w_unlock(CRYPTO_LOCK_ENGINE);
-	/* Whatever happened, any failed init()s are not failures in this
-	 * context, so clear our error state. */
-	ERR_clear_error();
-	return ret;
-	}
diff --git a/crypto/openssl/crypto/engine/engine.h b/crypto/openssl/crypto/engine/engine.h
deleted file mode 100644
index 3ec59338ffd1..000000000000
--- a/crypto/openssl/crypto/engine/engine.h
+++ /dev/null
@@ -1,785 +0,0 @@
-/* openssl/engine.h */
-/* Written by Geoff Thorpe (geoff@geoffthorpe.net) for the OpenSSL
- * project 2000.
- */
-/* ====================================================================
- * Copyright (c) 1999-2004 The OpenSSL Project.  All rights reserved.
- *
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions
- * are met:
- *
- * 1. Redistributions of source code must retain the above copyright
- *    notice, this list of conditions and the following disclaimer. 
- *
- * 2. Redistributions in binary form must reproduce the above copyright
- *    notice, this list of conditions and the following disclaimer in
- *    the documentation and/or other materials provided with the
- *    distribution.
- *
- * 3. All advertising materials mentioning features or use of this
- *    software must display the following acknowledgment:
- *    "This product includes software developed by the OpenSSL Project
- *    for use in the OpenSSL Toolkit. (http://www.OpenSSL.org/)"
- *
- * 4. The names "OpenSSL Toolkit" and "OpenSSL Project" must not be used to
- *    endorse or promote products derived from this software without
- *    prior written permission. For written permission, please contact
- *    licensing@OpenSSL.org.
- *
- * 5. Products derived from this software may not be called "OpenSSL"
- *    nor may "OpenSSL" appear in their names without prior written
- *    permission of the OpenSSL Project.
- *
- * 6. Redistributions of any form whatsoever must retain the following
- *    acknowledgment:
- *    "This product includes software developed by the OpenSSL Project
- *    for use in the OpenSSL Toolkit (http://www.OpenSSL.org/)"
- *
- * THIS SOFTWARE IS PROVIDED BY THE OpenSSL PROJECT ``AS IS'' AND ANY
- * EXPRESSED OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
- * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR
- * PURPOSE ARE DISCLAIMED.  IN NO EVENT SHALL THE OpenSSL PROJECT OR
- * ITS CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
- * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
- * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
- * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
- * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
- * STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
- * ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED
- * OF THE POSSIBILITY OF SUCH DAMAGE.
- * ====================================================================
- *
- * This product includes cryptographic software written by Eric Young
- * (eay@cryptsoft.com).  This product includes software written by Tim
- * Hudson (tjh@cryptsoft.com).
- *
- */
-/* ====================================================================
- * Copyright 2002 Sun Microsystems, Inc. ALL RIGHTS RESERVED.
- * ECDH support in OpenSSL originally developed by 
- * SUN MICROSYSTEMS, INC., and contributed to the OpenSSL project.
- */
-
-#ifndef HEADER_ENGINE_H
-#define HEADER_ENGINE_H
-
-#include <openssl/opensslconf.h>
-
-#ifdef OPENSSL_NO_ENGINE
-#error ENGINE is disabled.
-#endif
-
-#ifndef OPENSSL_NO_DEPRECATED
-#include <openssl/bn.h>
-#ifndef OPENSSL_NO_RSA
-#include <openssl/rsa.h>
-#endif
-#ifndef OPENSSL_NO_DSA
-#include <openssl/dsa.h>
-#endif
-#ifndef OPENSSL_NO_DH
-#include <openssl/dh.h>
-#endif
-#ifndef OPENSSL_NO_ECDH
-#include <openssl/ecdh.h>
-#endif
-#ifndef OPENSSL_NO_ECDSA
-#include <openssl/ecdsa.h>
-#endif
-#include <openssl/rand.h>
-#include <openssl/store.h>
-#include <openssl/ui.h>
-#include <openssl/err.h>
-#endif
-
-#include <openssl/ossl_typ.h>
-#include <openssl/symhacks.h>
-
-#ifdef  __cplusplus
-extern "C" {
-#endif
-
-/* These flags are used to control combinations of algorithm (methods)
- * by bitwise "OR"ing. */
-#define ENGINE_METHOD_RSA		(unsigned int)0x0001
-#define ENGINE_METHOD_DSA		(unsigned int)0x0002
-#define ENGINE_METHOD_DH		(unsigned int)0x0004
-#define ENGINE_METHOD_RAND		(unsigned int)0x0008
-#define ENGINE_METHOD_ECDH		(unsigned int)0x0010
-#define ENGINE_METHOD_ECDSA		(unsigned int)0x0020
-#define ENGINE_METHOD_CIPHERS		(unsigned int)0x0040
-#define ENGINE_METHOD_DIGESTS		(unsigned int)0x0080
-#define ENGINE_METHOD_STORE		(unsigned int)0x0100
-/* Obvious all-or-nothing cases. */
-#define ENGINE_METHOD_ALL		(unsigned int)0xFFFF
-#define ENGINE_METHOD_NONE		(unsigned int)0x0000
-
-/* This(ese) flag(s) controls behaviour of the ENGINE_TABLE mechanism used
- * internally to control registration of ENGINE implementations, and can be set
- * by ENGINE_set_table_flags(). The "NOINIT" flag prevents attempts to
- * initialise registered ENGINEs if they are not already initialised. */
-#define ENGINE_TABLE_FLAG_NOINIT	(unsigned int)0x0001
-
-/* ENGINE flags that can be set by ENGINE_set_flags(). */
-/* #define ENGINE_FLAGS_MALLOCED	0x0001 */ /* Not used */
-
-/* This flag is for ENGINEs that wish to handle the various 'CMD'-related
- * control commands on their own. Without this flag, ENGINE_ctrl() handles these
- * control commands on behalf of the ENGINE using their "cmd_defns" data. */
-#define ENGINE_FLAGS_MANUAL_CMD_CTRL	(int)0x0002
-
-/* This flag is for ENGINEs who return new duplicate structures when found via
- * "ENGINE_by_id()". When an ENGINE must store state (eg. if ENGINE_ctrl()
- * commands are called in sequence as part of some stateful process like
- * key-generation setup and execution), it can set this flag - then each attempt
- * to obtain the ENGINE will result in it being copied into a new structure.
- * Normally, ENGINEs don't declare this flag so ENGINE_by_id() just increments
- * the existing ENGINE's structural reference count. */
-#define ENGINE_FLAGS_BY_ID_COPY		(int)0x0004
-
-/* ENGINEs can support their own command types, and these flags are used in
- * ENGINE_CTRL_GET_CMD_FLAGS to indicate to the caller what kind of input each
- * command expects. Currently only numeric and string input is supported. If a
- * control command supports none of the _NUMERIC, _STRING, or _NO_INPUT options,
- * then it is regarded as an "internal" control command - and not for use in
- * config setting situations. As such, they're not available to the
- * ENGINE_ctrl_cmd_string() function, only raw ENGINE_ctrl() access. Changes to
- * this list of 'command types' should be reflected carefully in
- * ENGINE_cmd_is_executable() and ENGINE_ctrl_cmd_string(). */
-
-/* accepts a 'long' input value (3rd parameter to ENGINE_ctrl) */
-#define ENGINE_CMD_FLAG_NUMERIC		(unsigned int)0x0001
-/* accepts string input (cast from 'void*' to 'const char *', 4th parameter to
- * ENGINE_ctrl) */
-#define ENGINE_CMD_FLAG_STRING		(unsigned int)0x0002
-/* Indicates that the control command takes *no* input. Ie. the control command
- * is unparameterised. */
-#define ENGINE_CMD_FLAG_NO_INPUT	(unsigned int)0x0004
-/* Indicates that the control command is internal. This control command won't
- * be shown in any output, and is only usable through the ENGINE_ctrl_cmd()
- * function. */
-#define ENGINE_CMD_FLAG_INTERNAL	(unsigned int)0x0008
-
-/* NB: These 3 control commands are deprecated and should not be used. ENGINEs
- * relying on these commands should compile conditional support for
- * compatibility (eg. if these symbols are defined) but should also migrate the
- * same functionality to their own ENGINE-specific control functions that can be
- * "discovered" by calling applications. The fact these control commands
- * wouldn't be "executable" (ie. usable by text-based config) doesn't change the
- * fact that application code can find and use them without requiring per-ENGINE
- * hacking. */
-
-/* These flags are used to tell the ctrl function what should be done.
- * All command numbers are shared between all engines, even if some don't
- * make sense to some engines.  In such a case, they do nothing but return
- * the error ENGINE_R_CTRL_COMMAND_NOT_IMPLEMENTED. */
-#define ENGINE_CTRL_SET_LOGSTREAM		1
-#define ENGINE_CTRL_SET_PASSWORD_CALLBACK	2
-#define ENGINE_CTRL_HUP				3 /* Close and reinitialise any
-						     handles/connections etc. */
-#define ENGINE_CTRL_SET_USER_INTERFACE          4 /* Alternative to callback */
-#define ENGINE_CTRL_SET_CALLBACK_DATA           5 /* User-specific data, used
-						     when calling the password
-						     callback and the user
-						     interface */
-#define ENGINE_CTRL_LOAD_CONFIGURATION		6 /* Load a configuration, given
-						     a string that represents a
-						     file name or so */
-#define ENGINE_CTRL_LOAD_SECTION		7 /* Load data from a given
-						     section in the already loaded
-						     configuration */
-
-/* These control commands allow an application to deal with an arbitrary engine
- * in a dynamic way. Warn: Negative return values indicate errors FOR THESE
- * COMMANDS because zero is used to indicate 'end-of-list'. Other commands,
- * including ENGINE-specific command types, return zero for an error.
- *
- * An ENGINE can choose to implement these ctrl functions, and can internally
- * manage things however it chooses - it does so by setting the
- * ENGINE_FLAGS_MANUAL_CMD_CTRL flag (using ENGINE_set_flags()). Otherwise the
- * ENGINE_ctrl() code handles this on the ENGINE's behalf using the cmd_defns
- * data (set using ENGINE_set_cmd_defns()). This means an ENGINE's ctrl()
- * handler need only implement its own commands - the above "meta" commands will
- * be taken care of. */
-
-/* Returns non-zero if the supplied ENGINE has a ctrl() handler. If "not", then
- * all the remaining control commands will return failure, so it is worth
- * checking this first if the caller is trying to "discover" the engine's
- * capabilities and doesn't want errors generated unnecessarily. */
-#define ENGINE_CTRL_HAS_CTRL_FUNCTION		10
-/* Returns a positive command number for the first command supported by the
- * engine. Returns zero if no ctrl commands are supported. */
-#define ENGINE_CTRL_GET_FIRST_CMD_TYPE		11
-/* The 'long' argument specifies a command implemented by the engine, and the
- * return value is the next command supported, or zero if there are no more. */
-#define ENGINE_CTRL_GET_NEXT_CMD_TYPE		12
-/* The 'void*' argument is a command name (cast from 'const char *'), and the
- * return value is the command that corresponds to it. */
-#define ENGINE_CTRL_GET_CMD_FROM_NAME		13
-/* The next two allow a command to be converted into its corresponding string
- * form. In each case, the 'long' argument supplies the command. In the NAME_LEN
- * case, the return value is the length of the command name (not counting a
- * trailing EOL). In the NAME case, the 'void*' argument must be a string buffer
- * large enough, and it will be populated with the name of the command (WITH a
- * trailing EOL). */
-#define ENGINE_CTRL_GET_NAME_LEN_FROM_CMD	14
-#define ENGINE_CTRL_GET_NAME_FROM_CMD		15
-/* The next two are similar but give a "short description" of a command. */
-#define ENGINE_CTRL_GET_DESC_LEN_FROM_CMD	16
-#define ENGINE_CTRL_GET_DESC_FROM_CMD		17
-/* With this command, the return value is the OR'd combination of
- * ENGINE_CMD_FLAG_*** values that indicate what kind of input a given
- * engine-specific ctrl command expects. */
-#define ENGINE_CTRL_GET_CMD_FLAGS		18
-
-/* ENGINE implementations should start the numbering of their own control
- * commands from this value. (ie. ENGINE_CMD_BASE, ENGINE_CMD_BASE + 1, etc). */
-#define ENGINE_CMD_BASE				200
-
-/* NB: These 2 nCipher "chil" control commands are deprecated, and their
- * functionality is now available through ENGINE-specific control commands
- * (exposed through the above-mentioned 'CMD'-handling). Code using these 2
- * commands should be migrated to the more general command handling before these
- * are removed. */
-
-/* Flags specific to the nCipher "chil" engine */
-#define ENGINE_CTRL_CHIL_SET_FORKCHECK		100
-	/* Depending on the value of the (long)i argument, this sets or
-	 * unsets the SimpleForkCheck flag in the CHIL API to enable or
-	 * disable checking and workarounds for applications that fork().
-	 */
-#define ENGINE_CTRL_CHIL_NO_LOCKING		101
-	/* This prevents the initialisation function from providing mutex
-	 * callbacks to the nCipher library. */
-
-/* If an ENGINE supports its own specific control commands and wishes the
- * framework to handle the above 'ENGINE_CMD_***'-manipulation commands on its
- * behalf, it should supply a null-terminated array of ENGINE_CMD_DEFN entries
- * to ENGINE_set_cmd_defns(). It should also implement a ctrl() handler that
- * supports the stated commands (ie. the "cmd_num" entries as described by the
- * array). NB: The array must be ordered in increasing order of cmd_num.
- * "null-terminated" means that the last ENGINE_CMD_DEFN element has cmd_num set
- * to zero and/or cmd_name set to NULL. */
-typedef struct ENGINE_CMD_DEFN_st
-	{
-	unsigned int cmd_num; /* The command number */
-	const char *cmd_name; /* The command name itself */
-	const char *cmd_desc; /* A short description of the command */
-	unsigned int cmd_flags; /* The input the command expects */
-	} ENGINE_CMD_DEFN;
-
-/* Generic function pointer */
-typedef int (*ENGINE_GEN_FUNC_PTR)(void);
-/* Generic function pointer taking no arguments */
-typedef int (*ENGINE_GEN_INT_FUNC_PTR)(ENGINE *);
-/* Specific control function pointer */
-typedef int (*ENGINE_CTRL_FUNC_PTR)(ENGINE *, int, long, void *, void (*f)(void));
-/* Generic load_key function pointer */
-typedef EVP_PKEY * (*ENGINE_LOAD_KEY_PTR)(ENGINE *, const char *,
-	UI_METHOD *ui_method, void *callback_data);
-/* These callback types are for an ENGINE's handler for cipher and digest logic.
- * These handlers have these prototypes;
- *   int foo(ENGINE *e, const EVP_CIPHER **cipher, const int **nids, int nid);
- *   int foo(ENGINE *e, const EVP_MD **digest, const int **nids, int nid);
- * Looking at how to implement these handlers in the case of cipher support, if
- * the framework wants the EVP_CIPHER for 'nid', it will call;
- *   foo(e, &p_evp_cipher, NULL, nid);    (return zero for failure)
- * If the framework wants a list of supported 'nid's, it will call;
- *   foo(e, NULL, &p_nids, 0); (returns number of 'nids' or -1 for error)
- */
-/* Returns to a pointer to the array of supported cipher 'nid's. If the second
- * parameter is non-NULL it is set to the size of the returned array. */
-typedef int (*ENGINE_CIPHERS_PTR)(ENGINE *, const EVP_CIPHER **, const int **, int);
-typedef int (*ENGINE_DIGESTS_PTR)(ENGINE *, const EVP_MD **, const int **, int);
-
-/* STRUCTURE functions ... all of these functions deal with pointers to ENGINE
- * structures where the pointers have a "structural reference". This means that
- * their reference is to allowed access to the structure but it does not imply
- * that the structure is functional. To simply increment or decrement the
- * structural reference count, use ENGINE_by_id and ENGINE_free. NB: This is not
- * required when iterating using ENGINE_get_next as it will automatically
- * decrement the structural reference count of the "current" ENGINE and
- * increment the structural reference count of the ENGINE it returns (unless it
- * is NULL). */
-
-/* Get the first/last "ENGINE" type available. */
-ENGINE *ENGINE_get_first(void);
-ENGINE *ENGINE_get_last(void);
-/* Iterate to the next/previous "ENGINE" type (NULL = end of the list). */
-ENGINE *ENGINE_get_next(ENGINE *e);
-ENGINE *ENGINE_get_prev(ENGINE *e);
-/* Add another "ENGINE" type into the array. */
-int ENGINE_add(ENGINE *e);
-/* Remove an existing "ENGINE" type from the array. */
-int ENGINE_remove(ENGINE *e);
-/* Retrieve an engine from the list by its unique "id" value. */
-ENGINE *ENGINE_by_id(const char *id);
-/* Add all the built-in engines. */
-void ENGINE_load_openssl(void);
-void ENGINE_load_dynamic(void);
-#ifndef OPENSSL_NO_STATIC_ENGINE
-void ENGINE_load_4758cca(void);
-void ENGINE_load_aep(void);
-void ENGINE_load_atalla(void);
-void ENGINE_load_chil(void);
-void ENGINE_load_cswift(void);
-#ifndef OPENSSL_NO_GMP
-void ENGINE_load_gmp(void);
-#endif
-void ENGINE_load_nuron(void);
-void ENGINE_load_sureware(void);
-void ENGINE_load_ubsec(void);
-#endif
-void ENGINE_load_cryptodev(void);
-void ENGINE_load_padlock(void);
-void ENGINE_load_builtin_engines(void);
-
-/* Get and set global flags (ENGINE_TABLE_FLAG_***) for the implementation
- * "registry" handling. */
-unsigned int ENGINE_get_table_flags(void);
-void ENGINE_set_table_flags(unsigned int flags);
-
-/* Manage registration of ENGINEs per "table". For each type, there are 3
- * functions;
- *   ENGINE_register_***(e) - registers the implementation from 'e' (if it has one)
- *   ENGINE_unregister_***(e) - unregister the implementation from 'e'
- *   ENGINE_register_all_***() - call ENGINE_register_***() for each 'e' in the list
- * Cleanup is automatically registered from each table when required, so
- * ENGINE_cleanup() will reverse any "register" operations. */
-
-int ENGINE_register_RSA(ENGINE *e);
-void ENGINE_unregister_RSA(ENGINE *e);
-void ENGINE_register_all_RSA(void);
-
-int ENGINE_register_DSA(ENGINE *e);
-void ENGINE_unregister_DSA(ENGINE *e);
-void ENGINE_register_all_DSA(void);
-
-int ENGINE_register_ECDH(ENGINE *e);
-void ENGINE_unregister_ECDH(ENGINE *e);
-void ENGINE_register_all_ECDH(void);
-
-int ENGINE_register_ECDSA(ENGINE *e);
-void ENGINE_unregister_ECDSA(ENGINE *e);
-void ENGINE_register_all_ECDSA(void);
-
-int ENGINE_register_DH(ENGINE *e);
-void ENGINE_unregister_DH(ENGINE *e);
-void ENGINE_register_all_DH(void);
-
-int ENGINE_register_RAND(ENGINE *e);
-void ENGINE_unregister_RAND(ENGINE *e);
-void ENGINE_register_all_RAND(void);
-
-int ENGINE_register_STORE(ENGINE *e);
-void ENGINE_unregister_STORE(ENGINE *e);
-void ENGINE_register_all_STORE(void);
-
-int ENGINE_register_ciphers(ENGINE *e);
-void ENGINE_unregister_ciphers(ENGINE *e);
-void ENGINE_register_all_ciphers(void);
-
-int ENGINE_register_digests(ENGINE *e);
-void ENGINE_unregister_digests(ENGINE *e);
-void ENGINE_register_all_digests(void);
-
-/* These functions register all support from the above categories. Note, use of
- * these functions can result in static linkage of code your application may not
- * need. If you only need a subset of functionality, consider using more
- * selective initialisation. */
-int ENGINE_register_complete(ENGINE *e);
-int ENGINE_register_all_complete(void);
-
-/* Send parametrised control commands to the engine. The possibilities to send
- * down an integer, a pointer to data or a function pointer are provided. Any of
- * the parameters may or may not be NULL, depending on the command number. In
- * actuality, this function only requires a structural (rather than functional)
- * reference to an engine, but many control commands may require the engine be
- * functional. The caller should be aware of trying commands that require an
- * operational ENGINE, and only use functional references in such situations. */
-int ENGINE_ctrl(ENGINE *e, int cmd, long i, void *p, void (*f)(void));
-
-/* This function tests if an ENGINE-specific command is usable as a "setting".
- * Eg. in an application's config file that gets processed through
- * ENGINE_ctrl_cmd_string(). If this returns zero, it is not available to
- * ENGINE_ctrl_cmd_string(), only ENGINE_ctrl(). */
-int ENGINE_cmd_is_executable(ENGINE *e, int cmd);
-
-/* This function works like ENGINE_ctrl() with the exception of taking a
- * command name instead of a command number, and can handle optional commands.
- * See the comment on ENGINE_ctrl_cmd_string() for an explanation on how to
- * use the cmd_name and cmd_optional. */
-int ENGINE_ctrl_cmd(ENGINE *e, const char *cmd_name,
-        long i, void *p, void (*f)(void), int cmd_optional);
-
-/* This function passes a command-name and argument to an ENGINE. The cmd_name
- * is converted to a command number and the control command is called using
- * 'arg' as an argument (unless the ENGINE doesn't support such a command, in
- * which case no control command is called). The command is checked for input
- * flags, and if necessary the argument will be converted to a numeric value. If
- * cmd_optional is non-zero, then if the ENGINE doesn't support the given
- * cmd_name the return value will be success anyway. This function is intended
- * for applications to use so that users (or config files) can supply
- * engine-specific config data to the ENGINE at run-time to control behaviour of
- * specific engines. As such, it shouldn't be used for calling ENGINE_ctrl()
- * functions that return data, deal with binary data, or that are otherwise
- * supposed to be used directly through ENGINE_ctrl() in application code. Any
- * "return" data from an ENGINE_ctrl() operation in this function will be lost -
- * the return value is interpreted as failure if the return value is zero,
- * success otherwise, and this function returns a boolean value as a result. In
- * other words, vendors of 'ENGINE'-enabled devices should write ENGINE
- * implementations with parameterisations that work in this scheme, so that
- * compliant ENGINE-based applications can work consistently with the same
- * configuration for the same ENGINE-enabled devices, across applications. */
-int ENGINE_ctrl_cmd_string(ENGINE *e, const char *cmd_name, const char *arg,
-				int cmd_optional);
-
-/* These functions are useful for manufacturing new ENGINE structures. They
- * don't address reference counting at all - one uses them to populate an ENGINE
- * structure with personalised implementations of things prior to using it
- * directly or adding it to the builtin ENGINE list in OpenSSL. These are also
- * here so that the ENGINE structure doesn't have to be exposed and break binary
- * compatibility! */
-ENGINE *ENGINE_new(void);
-int ENGINE_free(ENGINE *e);
-int ENGINE_up_ref(ENGINE *e);
-int ENGINE_set_id(ENGINE *e, const char *id);
-int ENGINE_set_name(ENGINE *e, const char *name);
-int ENGINE_set_RSA(ENGINE *e, const RSA_METHOD *rsa_meth);
-int ENGINE_set_DSA(ENGINE *e, const DSA_METHOD *dsa_meth);
-int ENGINE_set_ECDH(ENGINE *e, const ECDH_METHOD *ecdh_meth);
-int ENGINE_set_ECDSA(ENGINE *e, const ECDSA_METHOD *ecdsa_meth);
-int ENGINE_set_DH(ENGINE *e, const DH_METHOD *dh_meth);
-int ENGINE_set_RAND(ENGINE *e, const RAND_METHOD *rand_meth);
-int ENGINE_set_STORE(ENGINE *e, const STORE_METHOD *store_meth);
-int ENGINE_set_destroy_function(ENGINE *e, ENGINE_GEN_INT_FUNC_PTR destroy_f);
-int ENGINE_set_init_function(ENGINE *e, ENGINE_GEN_INT_FUNC_PTR init_f);
-int ENGINE_set_finish_function(ENGINE *e, ENGINE_GEN_INT_FUNC_PTR finish_f);
-int ENGINE_set_ctrl_function(ENGINE *e, ENGINE_CTRL_FUNC_PTR ctrl_f);
-int ENGINE_set_load_privkey_function(ENGINE *e, ENGINE_LOAD_KEY_PTR loadpriv_f);
-int ENGINE_set_load_pubkey_function(ENGINE *e, ENGINE_LOAD_KEY_PTR loadpub_f);
-int ENGINE_set_ciphers(ENGINE *e, ENGINE_CIPHERS_PTR f);
-int ENGINE_set_digests(ENGINE *e, ENGINE_DIGESTS_PTR f);
-int ENGINE_set_flags(ENGINE *e, int flags);
-int ENGINE_set_cmd_defns(ENGINE *e, const ENGINE_CMD_DEFN *defns);
-/* These functions allow control over any per-structure ENGINE data. */
-int ENGINE_get_ex_new_index(long argl, void *argp, CRYPTO_EX_new *new_func,
-		CRYPTO_EX_dup *dup_func, CRYPTO_EX_free *free_func);
-int ENGINE_set_ex_data(ENGINE *e, int idx, void *arg);
-void *ENGINE_get_ex_data(const ENGINE *e, int idx);
-
-/* This function cleans up anything that needs it. Eg. the ENGINE_add() function
- * automatically ensures the list cleanup function is registered to be called
- * from ENGINE_cleanup(). Similarly, all ENGINE_register_*** functions ensure
- * ENGINE_cleanup() will clean up after them. */
-void ENGINE_cleanup(void);
-
-/* These return values from within the ENGINE structure. These can be useful
- * with functional references as well as structural references - it depends
- * which you obtained. Using the result for functional purposes if you only
- * obtained a structural reference may be problematic! */
-const char *ENGINE_get_id(const ENGINE *e);
-const char *ENGINE_get_name(const ENGINE *e);
-const RSA_METHOD *ENGINE_get_RSA(const ENGINE *e);
-const DSA_METHOD *ENGINE_get_DSA(const ENGINE *e);
-const ECDH_METHOD *ENGINE_get_ECDH(const ENGINE *e);
-const ECDSA_METHOD *ENGINE_get_ECDSA(const ENGINE *e);
-const DH_METHOD *ENGINE_get_DH(const ENGINE *e);
-const RAND_METHOD *ENGINE_get_RAND(const ENGINE *e);
-const STORE_METHOD *ENGINE_get_STORE(const ENGINE *e);
-ENGINE_GEN_INT_FUNC_PTR ENGINE_get_destroy_function(const ENGINE *e);
-ENGINE_GEN_INT_FUNC_PTR ENGINE_get_init_function(const ENGINE *e);
-ENGINE_GEN_INT_FUNC_PTR ENGINE_get_finish_function(const ENGINE *e);
-ENGINE_CTRL_FUNC_PTR ENGINE_get_ctrl_function(const ENGINE *e);
-ENGINE_LOAD_KEY_PTR ENGINE_get_load_privkey_function(const ENGINE *e);
-ENGINE_LOAD_KEY_PTR ENGINE_get_load_pubkey_function(const ENGINE *e);
-ENGINE_CIPHERS_PTR ENGINE_get_ciphers(const ENGINE *e);
-ENGINE_DIGESTS_PTR ENGINE_get_digests(const ENGINE *e);
-const EVP_CIPHER *ENGINE_get_cipher(ENGINE *e, int nid);
-const EVP_MD *ENGINE_get_digest(ENGINE *e, int nid);
-const ENGINE_CMD_DEFN *ENGINE_get_cmd_defns(const ENGINE *e);
-int ENGINE_get_flags(const ENGINE *e);
-
-/* FUNCTIONAL functions. These functions deal with ENGINE structures
- * that have (or will) be initialised for use. Broadly speaking, the
- * structural functions are useful for iterating the list of available
- * engine types, creating new engine types, and other "list" operations.
- * These functions actually deal with ENGINEs that are to be used. As
- * such these functions can fail (if applicable) when particular
- * engines are unavailable - eg. if a hardware accelerator is not
- * attached or not functioning correctly. Each ENGINE has 2 reference
- * counts; structural and functional. Every time a functional reference
- * is obtained or released, a corresponding structural reference is
- * automatically obtained or released too. */
-
-/* Initialise a engine type for use (or up its reference count if it's
- * already in use). This will fail if the engine is not currently
- * operational and cannot initialise. */
-int ENGINE_init(ENGINE *e);
-/* Free a functional reference to a engine type. This does not require
- * a corresponding call to ENGINE_free as it also releases a structural
- * reference. */
-int ENGINE_finish(ENGINE *e);
-
-/* The following functions handle keys that are stored in some secondary
- * location, handled by the engine.  The storage may be on a card or
- * whatever. */
-EVP_PKEY *ENGINE_load_private_key(ENGINE *e, const char *key_id,
-	UI_METHOD *ui_method, void *callback_data);
-EVP_PKEY *ENGINE_load_public_key(ENGINE *e, const char *key_id,
-	UI_METHOD *ui_method, void *callback_data);
-
-/* This returns a pointer for the current ENGINE structure that
- * is (by default) performing any RSA operations. The value returned
- * is an incremented reference, so it should be free'd (ENGINE_finish)
- * before it is discarded. */
-ENGINE *ENGINE_get_default_RSA(void);
-/* Same for the other "methods" */
-ENGINE *ENGINE_get_default_DSA(void);
-ENGINE *ENGINE_get_default_ECDH(void);
-ENGINE *ENGINE_get_default_ECDSA(void);
-ENGINE *ENGINE_get_default_DH(void);
-ENGINE *ENGINE_get_default_RAND(void);
-/* These functions can be used to get a functional reference to perform
- * ciphering or digesting corresponding to "nid". */
-ENGINE *ENGINE_get_cipher_engine(int nid);
-ENGINE *ENGINE_get_digest_engine(int nid);
-
-/* This sets a new default ENGINE structure for performing RSA
- * operations. If the result is non-zero (success) then the ENGINE
- * structure will have had its reference count up'd so the caller
- * should still free their own reference 'e'. */
-int ENGINE_set_default_RSA(ENGINE *e);
-int ENGINE_set_default_string(ENGINE *e, const char *def_list);
-/* Same for the other "methods" */
-int ENGINE_set_default_DSA(ENGINE *e);
-int ENGINE_set_default_ECDH(ENGINE *e);
-int ENGINE_set_default_ECDSA(ENGINE *e);
-int ENGINE_set_default_DH(ENGINE *e);
-int ENGINE_set_default_RAND(ENGINE *e);
-int ENGINE_set_default_ciphers(ENGINE *e);
-int ENGINE_set_default_digests(ENGINE *e);
-
-/* The combination "set" - the flags are bitwise "OR"d from the
- * ENGINE_METHOD_*** defines above. As with the "ENGINE_register_complete()"
- * function, this function can result in unnecessary static linkage. If your
- * application requires only specific functionality, consider using more
- * selective functions. */
-int ENGINE_set_default(ENGINE *e, unsigned int flags);
-
-void ENGINE_add_conf_module(void);
-
-/* Deprecated functions ... */
-/* int ENGINE_clear_defaults(void); */
-
-/**************************/
-/* DYNAMIC ENGINE SUPPORT */
-/**************************/
-
-/* Binary/behaviour compatibility levels */
-#define OSSL_DYNAMIC_VERSION		(unsigned long)0x00020000
-/* Binary versions older than this are too old for us (whether we're a loader or
- * a loadee) */
-#define OSSL_DYNAMIC_OLDEST		(unsigned long)0x00020000
-
-/* When compiling an ENGINE entirely as an external shared library, loadable by
- * the "dynamic" ENGINE, these types are needed. The 'dynamic_fns' structure
- * type provides the calling application's (or library's) error functionality
- * and memory management function pointers to the loaded library. These should
- * be used/set in the loaded library code so that the loading application's
- * 'state' will be used/changed in all operations. The 'static_state' pointer
- * allows the loaded library to know if it shares the same static data as the
- * calling application (or library), and thus whether these callbacks need to be
- * set or not. */
-typedef void *(*dyn_MEM_malloc_cb)(size_t);
-typedef void *(*dyn_MEM_realloc_cb)(void *, size_t);
-typedef void (*dyn_MEM_free_cb)(void *);
-typedef struct st_dynamic_MEM_fns {
-	dyn_MEM_malloc_cb			malloc_cb;
-	dyn_MEM_realloc_cb			realloc_cb;
-	dyn_MEM_free_cb				free_cb;
-	} dynamic_MEM_fns;
-/* FIXME: Perhaps the memory and locking code (crypto.h) should declare and use
- * these types so we (and any other dependant code) can simplify a bit?? */
-typedef void (*dyn_lock_locking_cb)(int,int,const char *,int);
-typedef int (*dyn_lock_add_lock_cb)(int*,int,int,const char *,int);
-typedef struct CRYPTO_dynlock_value *(*dyn_dynlock_create_cb)(
-						const char *,int);
-typedef void (*dyn_dynlock_lock_cb)(int,struct CRYPTO_dynlock_value *,
-						const char *,int);
-typedef void (*dyn_dynlock_destroy_cb)(struct CRYPTO_dynlock_value *,
-						const char *,int);
-typedef struct st_dynamic_LOCK_fns {
-	dyn_lock_locking_cb			lock_locking_cb;
-	dyn_lock_add_lock_cb			lock_add_lock_cb;
-	dyn_dynlock_create_cb			dynlock_create_cb;
-	dyn_dynlock_lock_cb			dynlock_lock_cb;
-	dyn_dynlock_destroy_cb			dynlock_destroy_cb;
-	} dynamic_LOCK_fns;
-/* The top-level structure */
-typedef struct st_dynamic_fns {
-	void 					*static_state;
-	const ERR_FNS				*err_fns;
-	const CRYPTO_EX_DATA_IMPL		*ex_data_fns;
-	dynamic_MEM_fns				mem_fns;
-	dynamic_LOCK_fns			lock_fns;
-	} dynamic_fns;
-
-/* The version checking function should be of this prototype. NB: The
- * ossl_version value passed in is the OSSL_DYNAMIC_VERSION of the loading code.
- * If this function returns zero, it indicates a (potential) version
- * incompatibility and the loaded library doesn't believe it can proceed.
- * Otherwise, the returned value is the (latest) version supported by the
- * loading library. The loader may still decide that the loaded code's version
- * is unsatisfactory and could veto the load. The function is expected to
- * be implemented with the symbol name "v_check", and a default implementation
- * can be fully instantiated with IMPLEMENT_DYNAMIC_CHECK_FN(). */
-typedef unsigned long (*dynamic_v_check_fn)(unsigned long ossl_version);
-#define IMPLEMENT_DYNAMIC_CHECK_FN() \
-	OPENSSL_EXPORT unsigned long v_check(unsigned long v) { \
-		if(v >= OSSL_DYNAMIC_OLDEST) return OSSL_DYNAMIC_VERSION; \
-		return 0; }
-
-/* This function is passed the ENGINE structure to initialise with its own
- * function and command settings. It should not adjust the structural or
- * functional reference counts. If this function returns zero, (a) the load will
- * be aborted, (b) the previous ENGINE state will be memcpy'd back onto the
- * structure, and (c) the shared library will be unloaded. So implementations
- * should do their own internal cleanup in failure circumstances otherwise they
- * could leak. The 'id' parameter, if non-NULL, represents the ENGINE id that
- * the loader is looking for. If this is NULL, the shared library can choose to
- * return failure or to initialise a 'default' ENGINE. If non-NULL, the shared
- * library must initialise only an ENGINE matching the passed 'id'. The function
- * is expected to be implemented with the symbol name "bind_engine". A standard
- * implementation can be instantiated with IMPLEMENT_DYNAMIC_BIND_FN(fn) where
- * the parameter 'fn' is a callback function that populates the ENGINE structure
- * and returns an int value (zero for failure). 'fn' should have prototype;
- *    [static] int fn(ENGINE *e, const char *id); */
-typedef int (*dynamic_bind_engine)(ENGINE *e, const char *id,
-				const dynamic_fns *fns);
-#define IMPLEMENT_DYNAMIC_BIND_FN(fn) \
-	OPENSSL_EXPORT \
-	int bind_engine(ENGINE *e, const char *id, const dynamic_fns *fns) { \
-		if(ENGINE_get_static_state() == fns->static_state) goto skip_cbs; \
-		if(!CRYPTO_set_mem_functions(fns->mem_fns.malloc_cb, \
-			fns->mem_fns.realloc_cb, fns->mem_fns.free_cb)) \
-			return 0; \
-		CRYPTO_set_locking_callback(fns->lock_fns.lock_locking_cb); \
-		CRYPTO_set_add_lock_callback(fns->lock_fns.lock_add_lock_cb); \
-		CRYPTO_set_dynlock_create_callback(fns->lock_fns.dynlock_create_cb); \
-		CRYPTO_set_dynlock_lock_callback(fns->lock_fns.dynlock_lock_cb); \
-		CRYPTO_set_dynlock_destroy_callback(fns->lock_fns.dynlock_destroy_cb); \
-		if(!CRYPTO_set_ex_data_implementation(fns->ex_data_fns)) \
-			return 0; \
-		if(!ERR_set_implementation(fns->err_fns)) return 0; \
-	skip_cbs: \
-		if(!fn(e,id)) return 0; \
-		return 1; }
-
-/* If the loading application (or library) and the loaded ENGINE library share
- * the same static data (eg. they're both dynamically linked to the same
- * libcrypto.so) we need a way to avoid trying to set system callbacks - this
- * would fail, and for the same reason that it's unnecessary to try. If the
- * loaded ENGINE has (or gets from through the loader) its own copy of the
- * libcrypto static data, we will need to set the callbacks. The easiest way to
- * detect this is to have a function that returns a pointer to some static data
- * and let the loading application and loaded ENGINE compare their respective
- * values. */
-void *ENGINE_get_static_state(void);
-
-#if defined(__OpenBSD__) || defined(__FreeBSD__)
-void ENGINE_setup_bsd_cryptodev(void);
-#endif
-
-/* BEGIN ERROR CODES */
-/* The following lines are auto generated by the script mkerr.pl. Any changes
- * made after this point may be overwritten when the script is next run.
- */
-void ERR_load_ENGINE_strings(void);
-
-/* Error codes for the ENGINE functions. */
-
-/* Function codes. */
-#define ENGINE_F_DYNAMIC_CTRL				 180
-#define ENGINE_F_DYNAMIC_GET_DATA_CTX			 181
-#define ENGINE_F_DYNAMIC_LOAD				 182
-#define ENGINE_F_DYNAMIC_SET_DATA_CTX			 183
-#define ENGINE_F_ENGINE_ADD				 105
-#define ENGINE_F_ENGINE_BY_ID				 106
-#define ENGINE_F_ENGINE_CMD_IS_EXECUTABLE		 170
-#define ENGINE_F_ENGINE_CTRL				 142
-#define ENGINE_F_ENGINE_CTRL_CMD			 178
-#define ENGINE_F_ENGINE_CTRL_CMD_STRING			 171
-#define ENGINE_F_ENGINE_FINISH				 107
-#define ENGINE_F_ENGINE_FREE_UTIL			 108
-#define ENGINE_F_ENGINE_GET_CIPHER			 185
-#define ENGINE_F_ENGINE_GET_DEFAULT_TYPE		 177
-#define ENGINE_F_ENGINE_GET_DIGEST			 186
-#define ENGINE_F_ENGINE_GET_NEXT			 115
-#define ENGINE_F_ENGINE_GET_PREV			 116
-#define ENGINE_F_ENGINE_INIT				 119
-#define ENGINE_F_ENGINE_LIST_ADD			 120
-#define ENGINE_F_ENGINE_LIST_REMOVE			 121
-#define ENGINE_F_ENGINE_LOAD_PRIVATE_KEY		 150
-#define ENGINE_F_ENGINE_LOAD_PUBLIC_KEY			 151
-#define ENGINE_F_ENGINE_NEW				 122
-#define ENGINE_F_ENGINE_REMOVE				 123
-#define ENGINE_F_ENGINE_SET_DEFAULT_STRING		 189
-#define ENGINE_F_ENGINE_SET_DEFAULT_TYPE		 126
-#define ENGINE_F_ENGINE_SET_ID				 129
-#define ENGINE_F_ENGINE_SET_NAME			 130
-#define ENGINE_F_ENGINE_TABLE_REGISTER			 184
-#define ENGINE_F_ENGINE_UNLOAD_KEY			 152
-#define ENGINE_F_ENGINE_UNLOCKED_FINISH			 191
-#define ENGINE_F_ENGINE_UP_REF				 190
-#define ENGINE_F_INT_CTRL_HELPER			 172
-#define ENGINE_F_INT_ENGINE_CONFIGURE			 188
-#define ENGINE_F_INT_ENGINE_MODULE_INIT			 187
-#define ENGINE_F_LOG_MESSAGE				 141
-
-/* Reason codes. */
-#define ENGINE_R_ALREADY_LOADED				 100
-#define ENGINE_R_ARGUMENT_IS_NOT_A_NUMBER		 133
-#define ENGINE_R_CMD_NOT_EXECUTABLE			 134
-#define ENGINE_R_COMMAND_TAKES_INPUT			 135
-#define ENGINE_R_COMMAND_TAKES_NO_INPUT			 136
-#define ENGINE_R_CONFLICTING_ENGINE_ID			 103
-#define ENGINE_R_CTRL_COMMAND_NOT_IMPLEMENTED		 119
-#define ENGINE_R_DH_NOT_IMPLEMENTED			 139
-#define ENGINE_R_DSA_NOT_IMPLEMENTED			 140
-#define ENGINE_R_DSO_FAILURE				 104
-#define ENGINE_R_DSO_NOT_FOUND				 132
-#define ENGINE_R_ENGINES_SECTION_ERROR			 148
-#define ENGINE_R_ENGINE_IS_NOT_IN_LIST			 105
-#define ENGINE_R_ENGINE_SECTION_ERROR			 149
-#define ENGINE_R_FAILED_LOADING_PRIVATE_KEY		 128
-#define ENGINE_R_FAILED_LOADING_PUBLIC_KEY		 129
-#define ENGINE_R_FINISH_FAILED				 106
-#define ENGINE_R_GET_HANDLE_FAILED			 107
-#define ENGINE_R_ID_OR_NAME_MISSING			 108
-#define ENGINE_R_INIT_FAILED				 109
-#define ENGINE_R_INTERNAL_LIST_ERROR			 110
-#define ENGINE_R_INVALID_ARGUMENT			 143
-#define ENGINE_R_INVALID_CMD_NAME			 137
-#define ENGINE_R_INVALID_CMD_NUMBER			 138
-#define ENGINE_R_INVALID_INIT_VALUE			 151
-#define ENGINE_R_INVALID_STRING				 150
-#define ENGINE_R_NOT_INITIALISED			 117
-#define ENGINE_R_NOT_LOADED				 112
-#define ENGINE_R_NO_CONTROL_FUNCTION			 120
-#define ENGINE_R_NO_INDEX				 144
-#define ENGINE_R_NO_LOAD_FUNCTION			 125
-#define ENGINE_R_NO_REFERENCE				 130
-#define ENGINE_R_NO_SUCH_ENGINE				 116
-#define ENGINE_R_NO_UNLOAD_FUNCTION			 126
-#define ENGINE_R_PROVIDE_PARAMETERS			 113
-#define ENGINE_R_RSA_NOT_IMPLEMENTED			 141
-#define ENGINE_R_UNIMPLEMENTED_CIPHER			 146
-#define ENGINE_R_UNIMPLEMENTED_DIGEST			 147
-#define ENGINE_R_VERSION_INCOMPATIBILITY		 145
-
-#ifdef  __cplusplus
-}
-#endif
-#endif
diff --git a/crypto/openssl/crypto/engine/enginetest.c b/crypto/openssl/crypto/engine/enginetest.c
deleted file mode 100644
index cf82f490dbb5..000000000000
--- a/crypto/openssl/crypto/engine/enginetest.c
+++ /dev/null
@@ -1,283 +0,0 @@
-/* crypto/engine/enginetest.c */
-/* Written by Geoff Thorpe (geoff@geoffthorpe.net) for the OpenSSL
- * project 2000.
- */
-/* ====================================================================
- * Copyright (c) 1999-2001 The OpenSSL Project.  All rights reserved.
- *
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions
- * are met:
- *
- * 1. Redistributions of source code must retain the above copyright
- *    notice, this list of conditions and the following disclaimer. 
- *
- * 2. Redistributions in binary form must reproduce the above copyright
- *    notice, this list of conditions and the following disclaimer in
- *    the documentation and/or other materials provided with the
- *    distribution.
- *
- * 3. All advertising materials mentioning features or use of this
- *    software must display the following acknowledgment:
- *    "This product includes software developed by the OpenSSL Project
- *    for use in the OpenSSL Toolkit. (http://www.OpenSSL.org/)"
- *
- * 4. The names "OpenSSL Toolkit" and "OpenSSL Project" must not be used to
- *    endorse or promote products derived from this software without
- *    prior written permission. For written permission, please contact
- *    licensing@OpenSSL.org.
- *
- * 5. Products derived from this software may not be called "OpenSSL"
- *    nor may "OpenSSL" appear in their names without prior written
- *    permission of the OpenSSL Project.
- *
- * 6. Redistributions of any form whatsoever must retain the following
- *    acknowledgment:
- *    "This product includes software developed by the OpenSSL Project
- *    for use in the OpenSSL Toolkit (http://www.OpenSSL.org/)"
- *
- * THIS SOFTWARE IS PROVIDED BY THE OpenSSL PROJECT ``AS IS'' AND ANY
- * EXPRESSED OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
- * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR
- * PURPOSE ARE DISCLAIMED.  IN NO EVENT SHALL THE OpenSSL PROJECT OR
- * ITS CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
- * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
- * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
- * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
- * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
- * STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
- * ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED
- * OF THE POSSIBILITY OF SUCH DAMAGE.
- * ====================================================================
- *
- * This product includes cryptographic software written by Eric Young
- * (eay@cryptsoft.com).  This product includes software written by Tim
- * Hudson (tjh@cryptsoft.com).
- *
- */
-
-#include <stdio.h>
-#include <string.h>
-
-#ifdef OPENSSL_NO_ENGINE
-int main(int argc, char *argv[])
-{
-    printf("No ENGINE support\n");
-    return(0);
-}
-#else
-#include <openssl/e_os2.h>
-#include <openssl/buffer.h>
-#include <openssl/crypto.h>
-#include <openssl/engine.h>
-#include <openssl/err.h>
-
-static void display_engine_list(void)
-	{
-	ENGINE *h;
-	int loop;
-
-	h = ENGINE_get_first();
-	loop = 0;
-	printf("listing available engine types\n");
-	while(h)
-		{
-		printf("engine %i, id = \"%s\", name = \"%s\"\n",
-			loop++, ENGINE_get_id(h), ENGINE_get_name(h));
-		h = ENGINE_get_next(h);
-		}
-	printf("end of list\n");
-	/* ENGINE_get_first() increases the struct_ref counter, so we 
-           must call ENGINE_free() to decrease it again */
-	ENGINE_free(h);
-	}
-
-int main(int argc, char *argv[])
-	{
-	ENGINE *block[512];
-	char buf[256];
-	const char *id, *name;
-	ENGINE *ptr;
-	int loop;
-	int to_return = 1;
-	ENGINE *new_h1 = NULL;
-	ENGINE *new_h2 = NULL;
-	ENGINE *new_h3 = NULL;
-	ENGINE *new_h4 = NULL;
-
-	/* enable memory leak checking unless explicitly disabled */
-	if (!((getenv("OPENSSL_DEBUG_MEMORY") != NULL) && (0 == strcmp(getenv("OPENSSL_DEBUG_MEMORY"), "off"))))
-		{
-		CRYPTO_malloc_debug_init();
-		CRYPTO_set_mem_debug_options(V_CRYPTO_MDEBUG_ALL);
-		}
-	else
-		{
-		/* OPENSSL_DEBUG_MEMORY=off */
-		CRYPTO_set_mem_debug_functions(0, 0, 0, 0, 0);
-		}
-	CRYPTO_mem_ctrl(CRYPTO_MEM_CHECK_ON);
-	ERR_load_crypto_strings();
-
-	memset(block, 0, 512 * sizeof(ENGINE *));
-	if(((new_h1 = ENGINE_new()) == NULL) ||
-			!ENGINE_set_id(new_h1, "test_id0") ||
-			!ENGINE_set_name(new_h1, "First test item") ||
-			((new_h2 = ENGINE_new()) == NULL) ||
-			!ENGINE_set_id(new_h2, "test_id1") ||
-			!ENGINE_set_name(new_h2, "Second test item") ||
-			((new_h3 = ENGINE_new()) == NULL) ||
-			!ENGINE_set_id(new_h3, "test_id2") ||
-			!ENGINE_set_name(new_h3, "Third test item") ||
-			((new_h4 = ENGINE_new()) == NULL) ||
-			!ENGINE_set_id(new_h4, "test_id3") ||
-			!ENGINE_set_name(new_h4, "Fourth test item"))
-		{
-		printf("Couldn't set up test ENGINE structures\n");
-		goto end;
-		}
-	printf("\nenginetest beginning\n\n");
-	display_engine_list();
-	if(!ENGINE_add(new_h1))
-		{
-		printf("Add failed!\n");
-		goto end;
-		}
-	display_engine_list();
-	ptr = ENGINE_get_first();
-	if(!ENGINE_remove(ptr))
-		{
-		printf("Remove failed!\n");
-		goto end;
-		}
-	if (ptr)
-		ENGINE_free(ptr);
-	display_engine_list();
-	if(!ENGINE_add(new_h3) || !ENGINE_add(new_h2))
-		{
-		printf("Add failed!\n");
-		goto end;
-		}
-	display_engine_list();
-	if(!ENGINE_remove(new_h2))
-		{
-		printf("Remove failed!\n");
-		goto end;
-		}
-	display_engine_list();
-	if(!ENGINE_add(new_h4))
-		{
-		printf("Add failed!\n");
-		goto end;
-		}
-	display_engine_list();
-	if(ENGINE_add(new_h3))
-		{
-		printf("Add *should* have failed but didn't!\n");
-		goto end;
-		}
-	else
-		printf("Add that should fail did.\n");
-	ERR_clear_error();
-	if(ENGINE_remove(new_h2))
-		{
-		printf("Remove *should* have failed but didn't!\n");
-		goto end;
-		}
-	else
-		printf("Remove that should fail did.\n");
-	ERR_clear_error();
-	if(!ENGINE_remove(new_h3))
-		{
-		printf("Remove failed!\n");
-		goto end;
-		}
-	display_engine_list();
-	if(!ENGINE_remove(new_h4))
-		{
-		printf("Remove failed!\n");
-		goto end;
-		}
-	display_engine_list();
-	/* Depending on whether there's any hardware support compiled
-	 * in, this remove may be destined to fail. */
-	ptr = ENGINE_get_first();
-	if(ptr)
-		if(!ENGINE_remove(ptr))
-			printf("Remove failed!i - probably no hardware "
-				"support present.\n");
-	if (ptr)
-		ENGINE_free(ptr);
-	display_engine_list();
-	if(!ENGINE_add(new_h1) || !ENGINE_remove(new_h1))
-		{
-		printf("Couldn't add and remove to an empty list!\n");
-		goto end;
-		}
-	else
-		printf("Successfully added and removed to an empty list!\n");
-	printf("About to beef up the engine-type list\n");
-	for(loop = 0; loop < 512; loop++)
-		{
-		sprintf(buf, "id%i", loop);
-		id = BUF_strdup(buf);
-		sprintf(buf, "Fake engine type %i", loop);
-		name = BUF_strdup(buf);
-		if(((block[loop] = ENGINE_new()) == NULL) ||
-				!ENGINE_set_id(block[loop], id) ||
-				!ENGINE_set_name(block[loop], name))
-			{
-			printf("Couldn't create block of ENGINE structures.\n"
-				"I'll probably also core-dump now, damn.\n");
-			goto end;
-			}
-		}
-	for(loop = 0; loop < 512; loop++)
-		{
-		if(!ENGINE_add(block[loop]))
-			{
-			printf("\nAdding stopped at %i, (%s,%s)\n",
-				loop, ENGINE_get_id(block[loop]),
-				ENGINE_get_name(block[loop]));
-			goto cleanup_loop;
-			}
-		else
-			printf("."); fflush(stdout);
-		}
-cleanup_loop:
-	printf("\nAbout to empty the engine-type list\n");
-	while((ptr = ENGINE_get_first()) != NULL)
-		{
-		if(!ENGINE_remove(ptr))
-			{
-			printf("\nRemove failed!\n");
-			goto end;
-			}
-		ENGINE_free(ptr);
-		printf("."); fflush(stdout);
-		}
-	for(loop = 0; loop < 512; loop++)
-		{
-		OPENSSL_free((void *)ENGINE_get_id(block[loop]));
-		OPENSSL_free((void *)ENGINE_get_name(block[loop]));
-		}
-	printf("\nTests completed happily\n");
-	to_return = 0;
-end:
-	if(to_return)
-		ERR_print_errors_fp(stderr);
-	if(new_h1) ENGINE_free(new_h1);
-	if(new_h2) ENGINE_free(new_h2);
-	if(new_h3) ENGINE_free(new_h3);
-	if(new_h4) ENGINE_free(new_h4);
-	for(loop = 0; loop < 512; loop++)
-		if(block[loop])
-			ENGINE_free(block[loop]);
-	ENGINE_cleanup();
-	CRYPTO_cleanup_all_ex_data();
-	ERR_free_strings();
-	ERR_remove_state(0);
-	CRYPTO_mem_leaks_fp(stderr);
-	return to_return;
-	}
-#endif
diff --git a/crypto/openssl/crypto/engine/hw.ec b/crypto/openssl/crypto/engine/hw.ec
deleted file mode 100644
index 5481a439183d..000000000000
--- a/crypto/openssl/crypto/engine/hw.ec
+++ /dev/null
@@ -1,8 +0,0 @@
-L AEPHK		hw_aep_err.h			hw_aep_err.c
-L ATALLA	hw_atalla_err.h			hw_atalla_err.c
-L CSWIFT	hw_cswift_err.h			hw_cswift_err.c
-L HWCRHK	hw_ncipher_err.h		hw_ncipher_err.c
-L NURON		hw_nuron_err.h			hw_nuron_err.c
-L SUREWARE	hw_sureware_err.h		hw_sureware_err.c
-L UBSEC		hw_ubsec_err.h			hw_ubsec_err.c
-L CCA4758	hw_4758_cca_err.h		hw_4758_cca_err.c
diff --git a/crypto/openssl/crypto/engine/hw_4758_cca.c b/crypto/openssl/crypto/engine/hw_4758_cca.c
deleted file mode 100644
index 4f5ae8a46dc4..000000000000
--- a/crypto/openssl/crypto/engine/hw_4758_cca.c
+++ /dev/null
@@ -1,969 +0,0 @@
-/* Author: Maurice Gittens <maurice@gittens.nl>                       */
-/* ====================================================================
- * Copyright (c) 1999 The OpenSSL Project.  All rights reserved.
- *
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions
- * are met:
- *
- * 1. Redistributions of source code must retain the above copyright
- *    notice, this list of conditions and the following disclaimer. 
- *
- * 2. Redistributions in binary form must reproduce the above copyright
- *    notice, this list of conditions and the following disclaimer in
- *    the documentation and/or other materials provided with the
- *    distribution.
- *
- * 3. All advertising materials mentioning features or use of this
- *    software must display the following acknowledgment:
- *    "This product includes software developed by the OpenSSL Project
- *    for use in the OpenSSL Toolkit. (http://www.OpenSSL.org/)"
- *
- * 4. The names "OpenSSL Toolkit" and "OpenSSL Project" must not be used to
- *    endorse or promote products derived from this software without
- *    prior written permission. For written permission, please contact
- *    licensing@OpenSSL.org.
- *
- * 5. Products derived from this software may not be called "OpenSSL"
- *    nor may "OpenSSL" appear in their names without prior written
- *    permission of the OpenSSL Project.
- *
- * 6. Redistributions of any form whatsoever must retain the following
- *    acknowledgment:
- *    "This product includes software developed by the OpenSSL Project
- *    for use in the OpenSSL Toolkit (http://www.OpenSSL.org/)"
- *
- * THIS SOFTWARE IS PROVIDED BY THE OpenSSL PROJECT ``AS IS'' AND ANY
- * EXPRESSED OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
- * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR
- * PURPOSE ARE DISCLAIMED.  IN NO EVENT SHALL THE OpenSSL PROJECT OR
- * ITS CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
- * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
- * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
- * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
- * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
- * STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
- * ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED
- * OF THE POSSIBILITY OF SUCH DAMAGE.
- * ====================================================================
- *
- * This product includes cryptographic software written by Eric Young
- * (eay@cryptsoft.com).  This product includes software written by Tim
- * Hudson (tjh@cryptsoft.com).
- *
- */
-
-#include <stdio.h>
-#include <openssl/crypto.h>
-/* #include <openssl/pem.h> */
-#include "cryptlib.h"
-#include <openssl/dso.h>
-#include <openssl/x509.h>
-#include <openssl/objects.h>
-#include <openssl/engine.h>
-
-#ifndef OPENSSL_NO_HW
-#ifndef OPENSSL_NO_HW_4758_CCA
-
-#ifdef FLAT_INC
-#include "hw_4758_cca.h"
-#else
-#include "vendor_defns/hw_4758_cca.h"
-#endif
-
-#include "hw_4758_cca_err.c"
-
-static int ibm_4758_cca_destroy(ENGINE *e);
-static int ibm_4758_cca_init(ENGINE *e);
-static int ibm_4758_cca_finish(ENGINE *e);
-static int ibm_4758_cca_ctrl(ENGINE *e, int cmd, long i, void *p, void (*f)());
-
-/* rsa functions */
-/*---------------*/
-#ifndef OPENSSL_NO_RSA
-static int cca_rsa_pub_enc(int flen, const unsigned char *from,
-		unsigned char *to, RSA *rsa,int padding);
-static int cca_rsa_priv_dec(int flen, const unsigned char *from,
-		unsigned char *to, RSA *rsa,int padding);
-static int cca_rsa_sign(int type, const unsigned char *m, unsigned int m_len,
-		unsigned char *sigret, unsigned int *siglen, const RSA *rsa);
-static int cca_rsa_verify(int dtype, const unsigned char *m, unsigned int m_len,
-		unsigned char *sigbuf, unsigned int siglen, const RSA *rsa);
-
-/* utility functions */
-/*-----------------------*/
-static EVP_PKEY *ibm_4758_load_privkey(ENGINE*, const char*,
-		UI_METHOD *ui_method, void *callback_data);
-static EVP_PKEY *ibm_4758_load_pubkey(ENGINE*, const char*,
-		UI_METHOD *ui_method, void *callback_data);
-
-static int getModulusAndExponent(const unsigned char *token, long *exponentLength,
-		unsigned char *exponent, long *modulusLength,
-		long *modulusFieldLength, unsigned char *modulus);
-#endif
-
-/* RAND number functions */
-/*-----------------------*/
-static int cca_get_random_bytes(unsigned char*, int );
-static int cca_random_status(void);
-
-static void cca_ex_free(void *obj, void *item, CRYPTO_EX_DATA *ad,
-		int idx,long argl, void *argp);
-
-/* Function pointers for CCA verbs */
-/*---------------------------------*/
-#ifndef OPENSSL_NO_RSA
-static F_KEYRECORDREAD keyRecordRead;
-static F_DIGITALSIGNATUREGENERATE digitalSignatureGenerate;
-static F_DIGITALSIGNATUREVERIFY digitalSignatureVerify;
-static F_PUBLICKEYEXTRACT publicKeyExtract;
-static F_PKAENCRYPT pkaEncrypt;
-static F_PKADECRYPT pkaDecrypt;
-#endif
-static F_RANDOMNUMBERGENERATE randomNumberGenerate;
-
-/* static variables */
-/*------------------*/
-static const char *CCA4758_LIB_NAME = NULL;
-static const char *get_CCA4758_LIB_NAME(void)
-	{
-	if(CCA4758_LIB_NAME)
-		return CCA4758_LIB_NAME;
-	return CCA_LIB_NAME;
-	}
-static void free_CCA4758_LIB_NAME(void)
-	{
-	if(CCA4758_LIB_NAME)
-		OPENSSL_free((void*)CCA4758_LIB_NAME);
-	CCA4758_LIB_NAME = NULL;
-	}
-static long set_CCA4758_LIB_NAME(const char *name)
-	{
-	free_CCA4758_LIB_NAME();
-	return (((CCA4758_LIB_NAME = BUF_strdup(name)) != NULL) ? 1 : 0);
-	}
-#ifndef OPENSSL_NO_RSA
-static const char* n_keyRecordRead = CSNDKRR;
-static const char* n_digitalSignatureGenerate = CSNDDSG;
-static const char* n_digitalSignatureVerify = CSNDDSV;
-static const char* n_publicKeyExtract = CSNDPKX;
-static const char* n_pkaEncrypt = CSNDPKE;
-static const char* n_pkaDecrypt = CSNDPKD;
-#endif
-static const char* n_randomNumberGenerate = CSNBRNG;
-
-static int hndidx = -1;
-static DSO *dso = NULL;
-
-/* openssl engine initialization structures */
-/*------------------------------------------*/
-
-#define CCA4758_CMD_SO_PATH		ENGINE_CMD_BASE
-static const ENGINE_CMD_DEFN	cca4758_cmd_defns[] = {
-	{CCA4758_CMD_SO_PATH,
-		"SO_PATH",
-		"Specifies the path to the '4758cca' shared library",
-		ENGINE_CMD_FLAG_STRING},
-	{0, NULL, NULL, 0}
-	};
-
-#ifndef OPENSSL_NO_RSA
-static RSA_METHOD ibm_4758_cca_rsa =
-	{
-	"IBM 4758 CCA RSA method",
-	cca_rsa_pub_enc,
-	NULL,
-	NULL,
-	cca_rsa_priv_dec,
-	NULL, /*rsa_mod_exp,*/
-	NULL, /*mod_exp_mont,*/
-	NULL, /* init */
-	NULL, /* finish */
-	RSA_FLAG_SIGN_VER,	  /* flags */
-	NULL, /* app_data */
-	cca_rsa_sign, /* rsa_sign */
-	cca_rsa_verify  /* rsa_verify */
-	};
-#endif
-
-static RAND_METHOD ibm_4758_cca_rand =
-	{
-	/* "IBM 4758 RAND method", */
-	NULL, /* seed */
-	cca_get_random_bytes, /* get random bytes from the card */
-	NULL, /* cleanup */
-	NULL, /* add */
-	cca_get_random_bytes, /* pseudo rand */
-	cca_random_status, /* status */
-	};
-
-static const char *engine_4758_cca_id = "4758cca";
-static const char *engine_4758_cca_name = "IBM 4758 CCA hardware engine support";
-
-/* engine implementation */
-/*-----------------------*/
-static int bind_helper(ENGINE *e)
-	{
-	if(!ENGINE_set_id(e, engine_4758_cca_id) ||
-			!ENGINE_set_name(e, engine_4758_cca_name) ||
-#ifndef OPENSSL_NO_RSA
-			!ENGINE_set_RSA(e, &ibm_4758_cca_rsa) ||
-#endif
-			!ENGINE_set_RAND(e, &ibm_4758_cca_rand) ||
-			!ENGINE_set_destroy_function(e, ibm_4758_cca_destroy) ||
-			!ENGINE_set_init_function(e, ibm_4758_cca_init) ||
-			!ENGINE_set_finish_function(e, ibm_4758_cca_finish) ||
-			!ENGINE_set_ctrl_function(e, ibm_4758_cca_ctrl) ||
-			!ENGINE_set_load_privkey_function(e, ibm_4758_load_privkey) ||
-			!ENGINE_set_load_pubkey_function(e, ibm_4758_load_pubkey) ||
-			!ENGINE_set_cmd_defns(e, cca4758_cmd_defns))
-		return 0;
-	/* Ensure the error handling is set up */
-	ERR_load_CCA4758_strings();
-	return 1;
-	}
-
-#ifndef ENGINE_DYNAMIC_SUPPORT
-static ENGINE *engine_4758_cca(void)
-	{
-	ENGINE *ret = ENGINE_new();
-	if(!ret)
-		return NULL;
-	if(!bind_helper(ret))
-		{
-		ENGINE_free(ret);
-		return NULL;
-		}
-	return ret;
-	}
-
-void ENGINE_load_4758cca(void)
-	{
-	ENGINE *e_4758 = engine_4758_cca();
-	if (!e_4758) return;
-	ENGINE_add(e_4758);
-	ENGINE_free(e_4758);
-	ERR_clear_error();   
-	}
-#endif
-
-static int ibm_4758_cca_destroy(ENGINE *e)
-	{
-	ERR_unload_CCA4758_strings();
-	free_CCA4758_LIB_NAME();
-	return 1;
-	}
-
-static int ibm_4758_cca_init(ENGINE *e)
-	{
-	if(dso)
-		{
-		CCA4758err(CCA4758_F_IBM_4758_CCA_INIT,CCA4758_R_ALREADY_LOADED);
-		goto err;
-		}
-
-	dso = DSO_load(NULL, get_CCA4758_LIB_NAME(), NULL, 0);
-	if(!dso)
-		{
-		CCA4758err(CCA4758_F_IBM_4758_CCA_INIT,CCA4758_R_DSO_FAILURE);
-		goto err;
-		}
-
-#ifndef OPENSSL_NO_RSA
-	if(!(keyRecordRead = (F_KEYRECORDREAD)
-				DSO_bind_func(dso, n_keyRecordRead)) ||
-			!(randomNumberGenerate = (F_RANDOMNUMBERGENERATE)
-				DSO_bind_func(dso, n_randomNumberGenerate)) ||
-			!(digitalSignatureGenerate = (F_DIGITALSIGNATUREGENERATE)
-				DSO_bind_func(dso, n_digitalSignatureGenerate)) ||
-			!(digitalSignatureVerify = (F_DIGITALSIGNATUREVERIFY)
-				DSO_bind_func(dso, n_digitalSignatureVerify)) ||
-			!(publicKeyExtract = (F_PUBLICKEYEXTRACT)
-				DSO_bind_func(dso, n_publicKeyExtract)) ||
-			!(pkaEncrypt = (F_PKAENCRYPT)
-				DSO_bind_func(dso, n_pkaEncrypt)) ||
-			!(pkaDecrypt = (F_PKADECRYPT)
-				DSO_bind_func(dso, n_pkaDecrypt)))
-		{
-		CCA4758err(CCA4758_F_IBM_4758_CCA_INIT,CCA4758_R_DSO_FAILURE);
-		goto err;
-		}
-#else
-	if(!(randomNumberGenerate = (F_RANDOMNUMBERGENERATE)
-				DSO_bind_func(dso, n_randomNumberGenerate)))
-		{
-		CCA4758err(CCA4758_F_IBM_4758_CCA_INIT,CCA4758_R_DSO_FAILURE);
-		goto err;
-		}
-#endif
-
-	hndidx = RSA_get_ex_new_index(0, "IBM 4758 CCA RSA key handle",
-		NULL, NULL, cca_ex_free);
-
-	return 1;
-err:
-	if(dso)
-		DSO_free(dso);
-	dso = NULL;
-
-	keyRecordRead = (F_KEYRECORDREAD)0;
-	randomNumberGenerate = (F_RANDOMNUMBERGENERATE)0;
-	digitalSignatureGenerate = (F_DIGITALSIGNATUREGENERATE)0;
-	digitalSignatureVerify = (F_DIGITALSIGNATUREVERIFY)0;
-	publicKeyExtract = (F_PUBLICKEYEXTRACT)0;
-	pkaEncrypt = (F_PKAENCRYPT)0;
-	pkaDecrypt = (F_PKADECRYPT)0;
-	return 0;
-	}
-
-static int ibm_4758_cca_finish(ENGINE *e)
-	{
-	free_CCA4758_LIB_NAME();
-	if(!dso)
-		{
-		CCA4758err(CCA4758_F_IBM_4758_CCA_FINISH,
-				CCA4758_R_NOT_LOADED);
-		return 0;
-		}
-	if(!DSO_free(dso))
-		{
-		CCA4758err(CCA4758_F_IBM_4758_CCA_FINISH,
-				CCA4758_R_UNIT_FAILURE);
-		return 0;
-		}
-	dso = NULL;
-	keyRecordRead = (F_KEYRECORDREAD)0;
-	randomNumberGenerate = (F_RANDOMNUMBERGENERATE)0;
-	digitalSignatureGenerate = (F_DIGITALSIGNATUREGENERATE)0;
-	digitalSignatureVerify = (F_DIGITALSIGNATUREVERIFY)0;
-	publicKeyExtract = (F_PUBLICKEYEXTRACT)0;
-	pkaEncrypt = (F_PKAENCRYPT)0;
-	pkaDecrypt = (F_PKADECRYPT)0;
-	return 1;
-	}
-
-static int ibm_4758_cca_ctrl(ENGINE *e, int cmd, long i, void *p, void (*f)())
-	{
-	int initialised = ((dso == NULL) ? 0 : 1);
-	switch(cmd)
-		{
-	case CCA4758_CMD_SO_PATH:
-		if(p == NULL)
-			{
-			CCA4758err(CCA4758_F_IBM_4758_CCA_CTRL,
-					ERR_R_PASSED_NULL_PARAMETER);
-			return 0;
-			}
-		if(initialised)
-			{
-			CCA4758err(CCA4758_F_IBM_4758_CCA_CTRL,
-					CCA4758_R_ALREADY_LOADED);
-			return 0;
-			}
-		return set_CCA4758_LIB_NAME((const char *)p);
-	default:
-		break;
-		}
-	CCA4758err(CCA4758_F_IBM_4758_CCA_CTRL,
-			CCA4758_R_COMMAND_NOT_IMPLEMENTED);
-	return 0;
-	}
-
-#ifndef OPENSSL_NO_RSA
-
-#define MAX_CCA_PKA_TOKEN_SIZE 2500
-
-static EVP_PKEY *ibm_4758_load_privkey(ENGINE* e, const char* key_id,
-			UI_METHOD *ui_method, void *callback_data)
-	{
-	RSA *rtmp = NULL;
-	EVP_PKEY *res = NULL;
-	unsigned char* keyToken = NULL;
-	unsigned char pubKeyToken[MAX_CCA_PKA_TOKEN_SIZE];
-	long pubKeyTokenLength = MAX_CCA_PKA_TOKEN_SIZE;
-	long keyTokenLength = MAX_CCA_PKA_TOKEN_SIZE;
-	long returnCode;
-	long reasonCode;
-	long exitDataLength = 0;
-	long ruleArrayLength = 0;
-	unsigned char exitData[8];
-	unsigned char ruleArray[8];
-	unsigned char keyLabel[64];
-	long keyLabelLength = strlen(key_id);
-	unsigned char modulus[256];
-	long modulusFieldLength = sizeof(modulus);
-	long modulusLength = 0;
-	unsigned char exponent[256];
-	long exponentLength = sizeof(exponent);
-
-	if (keyLabelLength > sizeof(keyLabel))
-		{
-		CCA4758err(CCA4758_F_IBM_4758_CCA_LOAD_PRIVKEY,
-		CCA4758_R_SIZE_TOO_LARGE_OR_TOO_SMALL);
-		return NULL;
-		}
-
-	memset(keyLabel,' ', sizeof(keyLabel));
-	memcpy(keyLabel, key_id, keyLabelLength);
-
-	keyToken = OPENSSL_malloc(MAX_CCA_PKA_TOKEN_SIZE + sizeof(long));
-	if (!keyToken)
-		{
-		CCA4758err(CCA4758_F_IBM_4758_CCA_LOAD_PRIVKEY,
-				ERR_R_MALLOC_FAILURE);
-		goto err;
-		}
-
-	keyRecordRead(&returnCode, &reasonCode, &exitDataLength,
-		exitData, &ruleArrayLength, ruleArray, keyLabel,
-		&keyTokenLength, keyToken+sizeof(long));
-
-	if (returnCode)
-		{
-		CCA4758err(CCA4758_F_IBM_4758_CCA_LOAD_PRIVKEY,
-			CCA4758_R_FAILED_LOADING_PRIVATE_KEY);
-		goto err;
-		}
-
-	publicKeyExtract(&returnCode, &reasonCode, &exitDataLength,
-		exitData, &ruleArrayLength, ruleArray, &keyTokenLength,
-		keyToken+sizeof(long), &pubKeyTokenLength, pubKeyToken);
-
-	if (returnCode)
-		{
-		CCA4758err(CCA4758_F_IBM_4758_CCA_LOAD_PRIVKEY,
-			CCA4758_R_FAILED_LOADING_PRIVATE_KEY);
-		goto err;
-		}
-
-	if (!getModulusAndExponent(pubKeyToken, &exponentLength,
-			exponent, &modulusLength, &modulusFieldLength,
-			modulus))
-		{
-		CCA4758err(CCA4758_F_IBM_4758_CCA_LOAD_PRIVKEY,
-			CCA4758_R_FAILED_LOADING_PRIVATE_KEY);
-		goto err;
-		}
-
-	(*(long*)keyToken) = keyTokenLength;
-	rtmp = RSA_new_method(e);
-	RSA_set_ex_data(rtmp, hndidx, (char *)keyToken);
-
-	rtmp->e = BN_bin2bn(exponent, exponentLength, NULL);
-	rtmp->n = BN_bin2bn(modulus, modulusFieldLength, NULL);
-	rtmp->flags |= RSA_FLAG_EXT_PKEY;
-
-	res = EVP_PKEY_new();
-	EVP_PKEY_assign_RSA(res, rtmp);
-
-	return res;
-err:
-	if (keyToken)
-		OPENSSL_free(keyToken);
-	if (res)
-		EVP_PKEY_free(res);
-	if (rtmp)
-		RSA_free(rtmp);
-	return NULL;
-	}
-
-static EVP_PKEY *ibm_4758_load_pubkey(ENGINE* e, const char* key_id,
-			UI_METHOD *ui_method, void *callback_data)
-	{
-	RSA *rtmp = NULL;
-	EVP_PKEY *res = NULL;
-	unsigned char* keyToken = NULL;
-	long keyTokenLength = MAX_CCA_PKA_TOKEN_SIZE;
-	long returnCode;
-	long reasonCode;
-	long exitDataLength = 0;
-	long ruleArrayLength = 0;
-	unsigned char exitData[8];
-	unsigned char ruleArray[8];
-	unsigned char keyLabel[64];
-	long keyLabelLength = strlen(key_id);
-	unsigned char modulus[512];
-	long modulusFieldLength = sizeof(modulus);
-	long modulusLength = 0;
-	unsigned char exponent[512];
-	long exponentLength = sizeof(exponent);
-
-	if (keyLabelLength > sizeof(keyLabel))
-		{
-		CCA4758err(CCA4758_F_IBM_4758_CCA_LOAD_PRIVKEY,
-			CCA4758_R_SIZE_TOO_LARGE_OR_TOO_SMALL);
-		return NULL;
-		}
-
-	memset(keyLabel,' ', sizeof(keyLabel));
-	memcpy(keyLabel, key_id, keyLabelLength);
-
-	keyToken = OPENSSL_malloc(MAX_CCA_PKA_TOKEN_SIZE + sizeof(long));
-	if (!keyToken)
-		{
-		CCA4758err(CCA4758_F_IBM_4758_CCA_LOAD_PUBKEY,
-				ERR_R_MALLOC_FAILURE);
-		goto err;
-		}
-
-	keyRecordRead(&returnCode, &reasonCode, &exitDataLength, exitData,
-		&ruleArrayLength, ruleArray, keyLabel, &keyTokenLength,
-		keyToken+sizeof(long));
-
-	if (returnCode)
-		{
-		CCA4758err(CCA4758_F_IBM_4758_CCA_LOAD_PRIVKEY,
-				ERR_R_MALLOC_FAILURE);
-		goto err;
-		}
-
-	if (!getModulusAndExponent(keyToken+sizeof(long), &exponentLength,
-			exponent, &modulusLength, &modulusFieldLength, modulus))
-		{
-		CCA4758err(CCA4758_F_IBM_4758_CCA_LOAD_PRIVKEY,
-			CCA4758_R_FAILED_LOADING_PUBLIC_KEY);
-		goto err;
-		}
-
-	(*(long*)keyToken) = keyTokenLength;
-	rtmp = RSA_new_method(e);
-	RSA_set_ex_data(rtmp, hndidx, (char *)keyToken);
-	rtmp->e = BN_bin2bn(exponent, exponentLength, NULL);
-	rtmp->n = BN_bin2bn(modulus, modulusFieldLength, NULL);
-	rtmp->flags |= RSA_FLAG_EXT_PKEY;
-	res = EVP_PKEY_new();
-	EVP_PKEY_assign_RSA(res, rtmp);
-
-	return res;
-err:
-	if (keyToken)
-		OPENSSL_free(keyToken);
-	if (res)
-		EVP_PKEY_free(res);
-	if (rtmp)
-		RSA_free(rtmp);
-	return NULL;
-	}
-
-static int cca_rsa_pub_enc(int flen, const unsigned char *from,
-			unsigned char *to, RSA *rsa,int padding)
-	{
-	long returnCode;
-	long reasonCode;
-	long lflen = flen;
-	long exitDataLength = 0;
-	unsigned char exitData[8];
-	long ruleArrayLength = 1;
-	unsigned char ruleArray[8] = "PKCS-1.2";
-	long dataStructureLength = 0;
-	unsigned char dataStructure[8];
-	long outputLength = RSA_size(rsa);
-	long keyTokenLength;
-	unsigned char* keyToken = (unsigned char*)RSA_get_ex_data(rsa, hndidx);
-
-	keyTokenLength = *(long*)keyToken;
-	keyToken+=sizeof(long);
-
-	pkaEncrypt(&returnCode, &reasonCode, &exitDataLength, exitData,
-		&ruleArrayLength, ruleArray, &lflen, (unsigned char*)from,
-		&dataStructureLength, dataStructure, &keyTokenLength,
-		keyToken, &outputLength, to);
-
-	if (returnCode || reasonCode)
-		return -(returnCode << 16 | reasonCode);
-	return outputLength;
-	}
-
-static int cca_rsa_priv_dec(int flen, const unsigned char *from,
-			unsigned char *to, RSA *rsa,int padding)
-	{
-	long returnCode;
-	long reasonCode;
-	long lflen = flen;
-	long exitDataLength = 0;
-	unsigned char exitData[8];
-	long ruleArrayLength = 1;
-	unsigned char ruleArray[8] = "PKCS-1.2";
-	long dataStructureLength = 0;
-	unsigned char dataStructure[8];
-	long outputLength = RSA_size(rsa);
-	long keyTokenLength;
-	unsigned char* keyToken = (unsigned char*)RSA_get_ex_data(rsa, hndidx);
-
-	keyTokenLength = *(long*)keyToken;
-	keyToken+=sizeof(long);
-
-	pkaDecrypt(&returnCode, &reasonCode, &exitDataLength, exitData,
-		&ruleArrayLength, ruleArray, &lflen, (unsigned char*)from,
-		&dataStructureLength, dataStructure, &keyTokenLength,
-		keyToken, &outputLength, to);
-
-	return (returnCode | reasonCode) ? 0 : 1;
-	}
-
-#define SSL_SIG_LEN 36
-
-static int cca_rsa_verify(int type, const unsigned char *m, unsigned int m_len,
-		unsigned char *sigbuf, unsigned int siglen, const RSA *rsa)
-	{
-	long returnCode;
-	long reasonCode;
-	long lsiglen = siglen;
-	long exitDataLength = 0;
-	unsigned char exitData[8];
-	long ruleArrayLength = 1;
-	unsigned char ruleArray[8] = "PKCS-1.1";
-	long keyTokenLength;
-	unsigned char* keyToken = (unsigned char*)RSA_get_ex_data(rsa, hndidx);
-	long length = SSL_SIG_LEN;
-	long keyLength ;
-	unsigned char *hashBuffer = NULL;
-	X509_SIG sig;
-	ASN1_TYPE parameter;
-	X509_ALGOR algorithm;
-	ASN1_OCTET_STRING digest;
-
-	keyTokenLength = *(long*)keyToken;
-	keyToken+=sizeof(long);
-
-	if (type == NID_md5 || type == NID_sha1)
-		{
-		sig.algor = &algorithm;
-		algorithm.algorithm = OBJ_nid2obj(type);
-
-		if (!algorithm.algorithm)
-			{
-			CCA4758err(CCA4758_F_IBM_4758_CCA_VERIFY,
-				CCA4758_R_UNKNOWN_ALGORITHM_TYPE);
-			return 0;
-			}
-
-		if (!algorithm.algorithm->length)
-			{
-			CCA4758err(CCA4758_F_IBM_4758_CCA_VERIFY,
-				CCA4758_R_ASN1_OID_UNKNOWN_FOR_MD);
-			return 0;
-			}
-
-		parameter.type = V_ASN1_NULL;
-		parameter.value.ptr = NULL;
-		algorithm.parameter = &parameter;
-
-		sig.digest = &digest;
-		sig.digest->data = (unsigned char*)m;
-		sig.digest->length = m_len;
-
-		length = i2d_X509_SIG(&sig, NULL);
-		}
-
-	keyLength = RSA_size(rsa);
-
-	if (length - RSA_PKCS1_PADDING > keyLength)
-		{
-		CCA4758err(CCA4758_F_IBM_4758_CCA_VERIFY,
-			CCA4758_R_SIZE_TOO_LARGE_OR_TOO_SMALL);
-		return 0;
-		}
-
-	switch (type)
-		{
-		case NID_md5_sha1 :
-			if (m_len != SSL_SIG_LEN)
-				{
-				CCA4758err(CCA4758_F_IBM_4758_CCA_VERIFY,
-				CCA4758_R_SIZE_TOO_LARGE_OR_TOO_SMALL);
-				return 0;
-				}
-
-			hashBuffer = (unsigned char *)m;
-			length = m_len;
-			break;
-		case NID_md5 :
-			{
-			unsigned char *ptr;
-			ptr = hashBuffer = OPENSSL_malloc(
-					(unsigned int)keyLength+1);
-			if (!hashBuffer)
-				{
-				CCA4758err(CCA4758_F_IBM_4758_CCA_VERIFY,
-						ERR_R_MALLOC_FAILURE);
-				return 0;
-				}
-
-			i2d_X509_SIG(&sig, &ptr);
-			}
-			break;
-		case NID_sha1 :
-			{
-			unsigned char *ptr;
-			ptr = hashBuffer = OPENSSL_malloc(
-					(unsigned int)keyLength+1);
-			if (!hashBuffer)
-				{
-				CCA4758err(CCA4758_F_IBM_4758_CCA_VERIFY,
-						ERR_R_MALLOC_FAILURE);
-				return 0;
-				}
-			i2d_X509_SIG(&sig, &ptr);
-			}
-			break;
-		default:
-			return 0;
-		}
-
-	digitalSignatureVerify(&returnCode, &reasonCode, &exitDataLength,
-		exitData, &ruleArrayLength, ruleArray, &keyTokenLength,
-		keyToken, &length, hashBuffer, &lsiglen, sigbuf);
-
-	if (type == NID_sha1 || type == NID_md5)
-		{
-		OPENSSL_cleanse(hashBuffer, keyLength+1);
-		OPENSSL_free(hashBuffer);
-		}
-
-	return ((returnCode || reasonCode) ? 0 : 1);
-	}
-
-#define SSL_SIG_LEN 36
-
-static int cca_rsa_sign(int type, const unsigned char *m, unsigned int m_len,
-		unsigned char *sigret, unsigned int *siglen, const RSA *rsa)
-	{
-	long returnCode;
-	long reasonCode;
-	long exitDataLength = 0;
-	unsigned char exitData[8];
-	long ruleArrayLength = 1;
-	unsigned char ruleArray[8] = "PKCS-1.1";
-	long outputLength=256;
-	long outputBitLength;
-	long keyTokenLength;
-	unsigned char *hashBuffer = NULL;
-	unsigned char* keyToken = (unsigned char*)RSA_get_ex_data(rsa, hndidx);
-	long length = SSL_SIG_LEN;
-	long keyLength ;
-	X509_SIG sig;
-	ASN1_TYPE parameter;
-	X509_ALGOR algorithm;
-	ASN1_OCTET_STRING digest;
-
-	keyTokenLength = *(long*)keyToken;
-	keyToken+=sizeof(long);
-
-	if (type == NID_md5 || type == NID_sha1)
-		{
-		sig.algor = &algorithm;
-		algorithm.algorithm = OBJ_nid2obj(type);
-
-		if (!algorithm.algorithm)
-			{
-			CCA4758err(CCA4758_F_IBM_4758_CCA_SIGN,
-				CCA4758_R_UNKNOWN_ALGORITHM_TYPE);
-			return 0;
-			}
-
-		if (!algorithm.algorithm->length)
-			{
-			CCA4758err(CCA4758_F_IBM_4758_CCA_SIGN,
-				CCA4758_R_ASN1_OID_UNKNOWN_FOR_MD);
-			return 0;
-			}
-
-		parameter.type = V_ASN1_NULL;
-		parameter.value.ptr = NULL;
-		algorithm.parameter = &parameter;
-
-		sig.digest = &digest;
-		sig.digest->data = (unsigned char*)m;
-		sig.digest->length = m_len;
-
-		length = i2d_X509_SIG(&sig, NULL);
-		}
-
-	keyLength = RSA_size(rsa);
-
-	if (length - RSA_PKCS1_PADDING > keyLength)
-		{
-		CCA4758err(CCA4758_F_IBM_4758_CCA_SIGN,
-			CCA4758_R_SIZE_TOO_LARGE_OR_TOO_SMALL);
-		return 0;
-		}
-
-	switch (type)
-		{
-		case NID_md5_sha1 :
-			if (m_len != SSL_SIG_LEN)
-				{
-				CCA4758err(CCA4758_F_IBM_4758_CCA_SIGN,
-				CCA4758_R_SIZE_TOO_LARGE_OR_TOO_SMALL);
-				return 0;
-				}
-			hashBuffer = (unsigned char*)m;
-			length = m_len;
-			break;
-		case NID_md5 :
-			{
-			unsigned char *ptr;
-			ptr = hashBuffer = OPENSSL_malloc(
-					(unsigned int)keyLength+1);
-			if (!hashBuffer)
-				{
-				CCA4758err(CCA4758_F_IBM_4758_CCA_VERIFY,
-						ERR_R_MALLOC_FAILURE);
-				return 0;
-				}
-			i2d_X509_SIG(&sig, &ptr);
-			}
-			break;
-		case NID_sha1 :
-			{
-			unsigned char *ptr;
-			ptr = hashBuffer = OPENSSL_malloc(
-					(unsigned int)keyLength+1);
-			if (!hashBuffer)
-				{
-				CCA4758err(CCA4758_F_IBM_4758_CCA_VERIFY,
-						ERR_R_MALLOC_FAILURE);
-				return 0;
-				}
-			i2d_X509_SIG(&sig, &ptr);
-			}
-			break;
-		default:
-			return 0;
-		}
-
-	digitalSignatureGenerate(&returnCode, &reasonCode, &exitDataLength,
-		exitData, &ruleArrayLength, ruleArray, &keyTokenLength,
-		keyToken, &length, hashBuffer, &outputLength, &outputBitLength,
-		sigret);
-
-	if (type == NID_sha1 || type == NID_md5)
-		{
-		OPENSSL_cleanse(hashBuffer, keyLength+1);
-		OPENSSL_free(hashBuffer);
-		}
-
-	*siglen = outputLength;
-
-	return ((returnCode || reasonCode) ? 0 : 1);
-	}
-
-static int getModulusAndExponent(const unsigned char*token, long *exponentLength,
-		unsigned char *exponent, long *modulusLength, long *modulusFieldLength,
-		unsigned char *modulus)
-	{
-	unsigned long len;
-
-	if (*token++ != (char)0x1E) /* internal PKA token? */
-		return 0;
-
-	if (*token++) /* token version must be zero */
-		return 0;
-
-	len = *token++;
-	len = len << 8;
-	len |= (unsigned char)*token++;
-
-	token += 4; /* skip reserved bytes */
-
-	if (*token++ == (char)0x04)
-		{
-		if (*token++) /* token version must be zero */
-			return 0;
-
-		len = *token++;
-		len = len << 8;
-		len |= (unsigned char)*token++;
-
-		token+=2; /* skip reserved section */
-
-		len = *token++;
-		len = len << 8;
-		len |= (unsigned char)*token++;
-
-		*exponentLength = len;
-
-		len = *token++;
-		len = len << 8;
-		len |= (unsigned char)*token++;
-
-		*modulusLength = len;
-
-		len = *token++;
-		len = len << 8;
-		len |= (unsigned char)*token++;
-
-		*modulusFieldLength = len;
-
-		memcpy(exponent, token, *exponentLength);
-		token+= *exponentLength;
-
-		memcpy(modulus, token, *modulusFieldLength);
-		return 1;
-		}
-	return 0;
-	}
-
-#endif /* OPENSSL_NO_RSA */
-
-static int cca_random_status(void)
-	{
-	return 1;
-	}
-
-static int cca_get_random_bytes(unsigned char* buf, int num)
-	{
-	long ret_code;
-	long reason_code;
-	long exit_data_length;
-	unsigned char exit_data[4];
-	unsigned char form[] = "RANDOM  ";
-	unsigned char rand_buf[8];
-
-	while(num >= sizeof(rand_buf))
-		{
-		randomNumberGenerate(&ret_code, &reason_code, &exit_data_length,
-			exit_data, form, rand_buf);
-		if (ret_code)
-			return 0;
-		num -= sizeof(rand_buf);
-		memcpy(buf, rand_buf, sizeof(rand_buf));
-		buf += sizeof(rand_buf);
-		}
-
-	if (num)
-		{
-		randomNumberGenerate(&ret_code, &reason_code, NULL, NULL,
-			form, rand_buf);
-		if (ret_code)
-			return 0;
-		memcpy(buf, rand_buf, num);
-		}
-
-	return 1;
-	}
-
-static void cca_ex_free(void *obj, void *item, CRYPTO_EX_DATA *ad, int idx,
-		long argl, void *argp)
-	{
-	if (item)
-		OPENSSL_free(item);
-	}
-
-/* Goo to handle building as a dynamic engine */
-#ifdef ENGINE_DYNAMIC_SUPPORT 
-static int bind_fn(ENGINE *e, const char *id)
-	{
-	if(id && (strcmp(id, engine_4758_cca_id) != 0))
-		return 0;
-	if(!bind_helper(e))
-		return 0;
-	return 1;
-	}       
-IMPLEMENT_DYNAMIC_CHECK_FN()
-IMPLEMENT_DYNAMIC_BIND_FN(bind_fn)
-#endif /* ENGINE_DYNAMIC_SUPPORT */
-
-#endif /* !OPENSSL_NO_HW_4758_CCA */
-#endif /* !OPENSSL_NO_HW */
diff --git a/crypto/openssl/crypto/engine/hw_4758_cca_err.c b/crypto/openssl/crypto/engine/hw_4758_cca_err.c
deleted file mode 100644
index 7ea5c63707bc..000000000000
--- a/crypto/openssl/crypto/engine/hw_4758_cca_err.c
+++ /dev/null
@@ -1,149 +0,0 @@
-/* hw_4758_cca_err.c */
-/* ====================================================================
- * Copyright (c) 1999-2002 The OpenSSL Project.  All rights reserved.
- *
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions
- * are met:
- *
- * 1. Redistributions of source code must retain the above copyright
- *    notice, this list of conditions and the following disclaimer. 
- *
- * 2. Redistributions in binary form must reproduce the above copyright
- *    notice, this list of conditions and the following disclaimer in
- *    the documentation and/or other materials provided with the
- *    distribution.
- *
- * 3. All advertising materials mentioning features or use of this
- *    software must display the following acknowledgment:
- *    "This product includes software developed by the OpenSSL Project
- *    for use in the OpenSSL Toolkit. (http://www.OpenSSL.org/)"
- *
- * 4. The names "OpenSSL Toolkit" and "OpenSSL Project" must not be used to
- *    endorse or promote products derived from this software without
- *    prior written permission. For written permission, please contact
- *    openssl-core@OpenSSL.org.
- *
- * 5. Products derived from this software may not be called "OpenSSL"
- *    nor may "OpenSSL" appear in their names without prior written
- *    permission of the OpenSSL Project.
- *
- * 6. Redistributions of any form whatsoever must retain the following
- *    acknowledgment:
- *    "This product includes software developed by the OpenSSL Project
- *    for use in the OpenSSL Toolkit (http://www.OpenSSL.org/)"
- *
- * THIS SOFTWARE IS PROVIDED BY THE OpenSSL PROJECT ``AS IS'' AND ANY
- * EXPRESSED OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
- * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR
- * PURPOSE ARE DISCLAIMED.  IN NO EVENT SHALL THE OpenSSL PROJECT OR
- * ITS CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
- * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
- * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
- * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
- * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
- * STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
- * ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED
- * OF THE POSSIBILITY OF SUCH DAMAGE.
- * ====================================================================
- *
- * This product includes cryptographic software written by Eric Young
- * (eay@cryptsoft.com).  This product includes software written by Tim
- * Hudson (tjh@cryptsoft.com).
- *
- */
-
-/* NOTE: this file was auto generated by the mkerr.pl script: any changes
- * made to it will be overwritten when the script next updates this file,
- * only reason strings will be preserved.
- */
-
-#include <stdio.h>
-#include <openssl/err.h>
-#include "hw_4758_cca_err.h"
-
-/* BEGIN ERROR CODES */
-#ifndef OPENSSL_NO_ERR
-static ERR_STRING_DATA CCA4758_str_functs[]=
-	{
-{ERR_PACK(0,CCA4758_F_IBM_4758_CCA_CTRL,0),	"IBM_4758_CCA_CTRL"},
-{ERR_PACK(0,CCA4758_F_IBM_4758_CCA_FINISH,0),	"IBM_4758_CCA_FINISH"},
-{ERR_PACK(0,CCA4758_F_IBM_4758_CCA_INIT,0),	"IBM_4758_CCA_INIT"},
-{ERR_PACK(0,CCA4758_F_IBM_4758_CCA_LOAD_PRIVKEY,0),	"IBM_4758_CCA_LOAD_PRIVKEY"},
-{ERR_PACK(0,CCA4758_F_IBM_4758_CCA_LOAD_PUBKEY,0),	"IBM_4758_CCA_LOAD_PUBKEY"},
-{ERR_PACK(0,CCA4758_F_IBM_4758_CCA_SIGN,0),	"IBM_4758_CCA_SIGN"},
-{ERR_PACK(0,CCA4758_F_IBM_4758_CCA_VERIFY,0),	"IBM_4758_CCA_VERIFY"},
-{0,NULL}
-	};
-
-static ERR_STRING_DATA CCA4758_str_reasons[]=
-	{
-{CCA4758_R_ALREADY_LOADED                ,"already loaded"},
-{CCA4758_R_ASN1_OID_UNKNOWN_FOR_MD       ,"asn1 oid unknown for md"},
-{CCA4758_R_COMMAND_NOT_IMPLEMENTED       ,"command not implemented"},
-{CCA4758_R_DSO_FAILURE                   ,"dso failure"},
-{CCA4758_R_FAILED_LOADING_PRIVATE_KEY    ,"failed loading private key"},
-{CCA4758_R_FAILED_LOADING_PUBLIC_KEY     ,"failed loading public key"},
-{CCA4758_R_NOT_LOADED                    ,"not loaded"},
-{CCA4758_R_SIZE_TOO_LARGE_OR_TOO_SMALL   ,"size too large or too small"},
-{CCA4758_R_UNIT_FAILURE                  ,"unit failure"},
-{CCA4758_R_UNKNOWN_ALGORITHM_TYPE        ,"unknown algorithm type"},
-{0,NULL}
-	};
-
-#endif
-
-#ifdef CCA4758_LIB_NAME
-static ERR_STRING_DATA CCA4758_lib_name[]=
-        {
-{0	,CCA4758_LIB_NAME},
-{0,NULL}
-	};
-#endif
-
-
-static int CCA4758_lib_error_code=0;
-static int CCA4758_error_init=1;
-
-static void ERR_load_CCA4758_strings(void)
-	{
-	if (CCA4758_lib_error_code == 0)
-		CCA4758_lib_error_code=ERR_get_next_error_library();
-
-	if (CCA4758_error_init)
-		{
-		CCA4758_error_init=0;
-#ifndef OPENSSL_NO_ERR
-		ERR_load_strings(CCA4758_lib_error_code,CCA4758_str_functs);
-		ERR_load_strings(CCA4758_lib_error_code,CCA4758_str_reasons);
-#endif
-
-#ifdef CCA4758_LIB_NAME
-		CCA4758_lib_name->error = ERR_PACK(CCA4758_lib_error_code,0,0);
-		ERR_load_strings(0,CCA4758_lib_name);
-#endif
-		}
-	}
-
-static void ERR_unload_CCA4758_strings(void)
-	{
-	if (CCA4758_error_init == 0)
-		{
-#ifndef OPENSSL_NO_ERR
-		ERR_unload_strings(CCA4758_lib_error_code,CCA4758_str_functs);
-		ERR_unload_strings(CCA4758_lib_error_code,CCA4758_str_reasons);
-#endif
-
-#ifdef CCA4758_LIB_NAME
-		ERR_unload_strings(0,CCA4758_lib_name);
-#endif
-		CCA4758_error_init=1;
-		}
-	}
-
-static void ERR_CCA4758_error(int function, int reason, char *file, int line)
-	{
-	if (CCA4758_lib_error_code == 0)
-		CCA4758_lib_error_code=ERR_get_next_error_library();
-	ERR_PUT_error(CCA4758_lib_error_code,function,reason,file,line);
-	}
diff --git a/crypto/openssl/crypto/engine/hw_4758_cca_err.h b/crypto/openssl/crypto/engine/hw_4758_cca_err.h
deleted file mode 100644
index 2fc563ab1170..000000000000
--- a/crypto/openssl/crypto/engine/hw_4758_cca_err.h
+++ /dev/null
@@ -1,93 +0,0 @@
-/* ====================================================================
- * Copyright (c) 2001 The OpenSSL Project.  All rights reserved.
- *
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions
- * are met:
- *
- * 1. Redistributions of source code must retain the above copyright
- *    notice, this list of conditions and the following disclaimer. 
- *
- * 2. Redistributions in binary form must reproduce the above copyright
- *    notice, this list of conditions and the following disclaimer in
- *    the documentation and/or other materials provided with the
- *    distribution.
- *
- * 3. All advertising materials mentioning features or use of this
- *    software must display the following acknowledgment:
- *    "This product includes software developed by the OpenSSL Project
- *    for use in the OpenSSL Toolkit. (http://www.openssl.org/)"
- *
- * 4. The names "OpenSSL Toolkit" and "OpenSSL Project" must not be used to
- *    endorse or promote products derived from this software without
- *    prior written permission. For written permission, please contact
- *    openssl-core@openssl.org.
- *
- * 5. Products derived from this software may not be called "OpenSSL"
- *    nor may "OpenSSL" appear in their names without prior written
- *    permission of the OpenSSL Project.
- *
- * 6. Redistributions of any form whatsoever must retain the following
- *    acknowledgment:
- *    "This product includes software developed by the OpenSSL Project
- *    for use in the OpenSSL Toolkit (http://www.openssl.org/)"
- *
- * THIS SOFTWARE IS PROVIDED BY THE OpenSSL PROJECT ``AS IS'' AND ANY
- * EXPRESSED OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
- * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR
- * PURPOSE ARE DISCLAIMED.  IN NO EVENT SHALL THE OpenSSL PROJECT OR
- * ITS CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
- * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
- * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
- * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
- * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
- * STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
- * ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED
- * OF THE POSSIBILITY OF SUCH DAMAGE.
- * ====================================================================
- *
- * This product includes cryptographic software written by Eric Young
- * (eay@cryptsoft.com).  This product includes software written by Tim
- * Hudson (tjh@cryptsoft.com).
- *
- */
-
-#ifndef HEADER_CCA4758_ERR_H
-#define HEADER_CCA4758_ERR_H
-
-/* BEGIN ERROR CODES */
-/* The following lines are auto generated by the script mkerr.pl. Any changes
- * made after this point may be overwritten when the script is next run.
- */
-static void ERR_load_CCA4758_strings(void);
-static void ERR_unload_CCA4758_strings(void);
-static void ERR_CCA4758_error(int function, int reason, char *file, int line);
-#define CCA4758err(f,r) ERR_CCA4758_error((f),(r),__FILE__,__LINE__)
-
-/* Error codes for the CCA4758 functions. */
-
-/* Function codes. */
-#define CCA4758_F_IBM_4758_CCA_CTRL			 100
-#define CCA4758_F_IBM_4758_CCA_FINISH			 101
-#define CCA4758_F_IBM_4758_CCA_INIT			 102
-#define CCA4758_F_IBM_4758_CCA_LOAD_PRIVKEY		 103
-#define CCA4758_F_IBM_4758_CCA_LOAD_PUBKEY		 104
-#define CCA4758_F_IBM_4758_CCA_SIGN			 105
-#define CCA4758_F_IBM_4758_CCA_VERIFY			 106
-
-/* Reason codes. */
-#define CCA4758_R_ALREADY_LOADED			 100
-#define CCA4758_R_ASN1_OID_UNKNOWN_FOR_MD		 101
-#define CCA4758_R_COMMAND_NOT_IMPLEMENTED		 102
-#define CCA4758_R_DSO_FAILURE				 103
-#define CCA4758_R_FAILED_LOADING_PRIVATE_KEY		 104
-#define CCA4758_R_FAILED_LOADING_PUBLIC_KEY		 105
-#define CCA4758_R_NOT_LOADED				 106
-#define CCA4758_R_SIZE_TOO_LARGE_OR_TOO_SMALL		 107
-#define CCA4758_R_UNIT_FAILURE				 108
-#define CCA4758_R_UNKNOWN_ALGORITHM_TYPE		 109
-
-#ifdef  __cplusplus
-}
-#endif
-#endif
diff --git a/crypto/openssl/crypto/engine/hw_aep.c b/crypto/openssl/crypto/engine/hw_aep.c
deleted file mode 100644
index 8b8380a582b4..000000000000
--- a/crypto/openssl/crypto/engine/hw_aep.c
+++ /dev/null
@@ -1,1119 +0,0 @@
-/* crypto/engine/hw_aep.c */
-/*
- */
-/* ====================================================================
- * Copyright (c) 1999 The OpenSSL Project.  All rights reserved.
- *
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions
- * are met:
- *
- * 1. Redistributions of source code must retain the above copyright
- *    notice, this list of conditions and the following disclaimer. 
- *
- * 2. Redistributions in binary form must reproduce the above copyright
- *    notice, this list of conditions and the following disclaimer in
- *    the documentation and/or other materials provided with the
- *    distribution.
- *
- * 3. All advertising materials mentioning features or use of this
- *    software must display the following acknowledgment:
- *    "This product includes software developed by the OpenSSL Project
- *    for use in the OpenSSL Toolkit. (http://www.OpenSSL.org/)"
- *
- * 4. The names "OpenSSL Toolkit" and "OpenSSL Project" must not be used to
- *    endorse or promote products derived from this software without
- *    prior written permission. For written permission, please contact
- *    licensing@OpenSSL.org.
- *
- * 5. Products derived from this software may not be called "OpenSSL"
- *    nor may "OpenSSL" appear in their names without prior written
- *    permission of the OpenSSL Project.
- *
- * 6. Redistributions of any form whatsoever must retain the following
- *    acknowledgment:
- *    "This product includes software developed by the OpenSSL Project
- *    for use in the OpenSSL Toolkit (http://www.OpenSSL.org/)"
- *
- * THIS SOFTWARE IS PROVIDED BY THE OpenSSL PROJECT ``AS IS'' AND ANY
- * EXPRESSED OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
- * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR
- * PURPOSE ARE DISCLAIMED.  IN NO EVENT SHALL THE OpenSSL PROJECT OR
- * ITS CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
- * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
- * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
- * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
- * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
- * STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
- * ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED
- * OF THE POSSIBILITY OF SUCH DAMAGE.
- * ====================================================================
- *
- * This product includes cryptographic software written by Eric Young
- * (eay@cryptsoft.com).  This product includes software written by Tim
- * Hudson (tjh@cryptsoft.com).
- *
- */
-
-#include <stdio.h>
-#include <openssl/bn.h>
-#include <string.h>
-
-#include <openssl/e_os2.h>
-#if !defined(OPENSSL_SYS_MSDOS) || defined(__DJGPP__)
-#include <sys/types.h>
-#include <unistd.h>
-#else
-#include <process.h>
-typedef int pid_t;
-#endif
-
-#include <openssl/crypto.h>
-#include <openssl/dso.h>
-#include <openssl/engine.h>
-#include <openssl/buffer.h>
-
-#ifndef OPENSSL_NO_HW
-#ifndef OPENSSL_NO_HW_AEP
-#ifdef FLAT_INC
-#include "aep.h"
-#else
-#include "vendor_defns/aep.h"
-#endif
-
-#define AEP_LIB_NAME "aep engine"
-#define FAIL_TO_SW 0x10101010
-
-#include "hw_aep_err.c"
-
-static int aep_init(ENGINE *e);
-static int aep_finish(ENGINE *e);
-static int aep_ctrl(ENGINE *e, int cmd, long i, void *p, void (*f)());
-static int aep_destroy(ENGINE *e);
-
-static AEP_RV aep_get_connection(AEP_CONNECTION_HNDL_PTR hConnection);
-static AEP_RV aep_return_connection(AEP_CONNECTION_HNDL hConnection);
-static AEP_RV aep_close_connection(AEP_CONNECTION_HNDL hConnection);
-static AEP_RV aep_close_all_connections(int use_engine_lock, int *in_use);
-
-/* BIGNUM stuff */
-static int aep_mod_exp(BIGNUM *r, const BIGNUM *a, const BIGNUM *p,
-	const BIGNUM *m, BN_CTX *ctx);
-
-static AEP_RV aep_mod_exp_crt(BIGNUM *r,const  BIGNUM *a, const BIGNUM *p,
-	const BIGNUM *q, const BIGNUM *dmp1,const BIGNUM *dmq1,
-	const BIGNUM *iqmp, BN_CTX *ctx);
-
-/* RSA stuff */
-#ifndef OPENSSL_NO_RSA
-static int aep_rsa_mod_exp(BIGNUM *r0, const BIGNUM *I, RSA *rsa);
-#endif
-
-/* This function is aliased to mod_exp (with the mont stuff dropped). */
-static int aep_mod_exp_mont(BIGNUM *r, const BIGNUM *a, const BIGNUM *p,
-	const BIGNUM *m, BN_CTX *ctx, BN_MONT_CTX *m_ctx);
-
-/* DSA stuff */
-#ifndef OPENSSL_NO_DSA
-static int aep_dsa_mod_exp(DSA *dsa, BIGNUM *rr, BIGNUM *a1,
-	BIGNUM *p1, BIGNUM *a2, BIGNUM *p2, BIGNUM *m,
-	BN_CTX *ctx, BN_MONT_CTX *in_mont);
-
-static int aep_mod_exp_dsa(DSA *dsa, BIGNUM *r, BIGNUM *a,
-	const BIGNUM *p, const BIGNUM *m, BN_CTX *ctx,
-	BN_MONT_CTX *m_ctx);
-#endif
-
-/* DH stuff */
-/* This function is aliased to mod_exp (with the DH and mont dropped). */
-#ifndef OPENSSL_NO_DH
-static int aep_mod_exp_dh(const DH *dh, BIGNUM *r, const BIGNUM *a,
-	const BIGNUM *p, const BIGNUM *m, BN_CTX *ctx, BN_MONT_CTX *m_ctx);
-#endif
-
-/* rand stuff   */
-#ifdef AEPRAND
-static int aep_rand(unsigned char *buf, int num);
-static int aep_rand_status(void);
-#endif
-
-/* Bignum conversion stuff */
-static AEP_RV GetBigNumSize(AEP_VOID_PTR ArbBigNum, AEP_U32* BigNumSize);
-static AEP_RV MakeAEPBigNum(AEP_VOID_PTR ArbBigNum, AEP_U32 BigNumSize,
-	unsigned char* AEP_BigNum);
-static AEP_RV ConvertAEPBigNum(void* ArbBigNum, AEP_U32 BigNumSize,
-	unsigned char* AEP_BigNum);
-
-/* The definitions for control commands specific to this engine */
-#define AEP_CMD_SO_PATH		ENGINE_CMD_BASE
-static const ENGINE_CMD_DEFN aep_cmd_defns[] =
-	{
-	{ AEP_CMD_SO_PATH,
-	  "SO_PATH",
-	  "Specifies the path to the 'aep' shared library",
-	  ENGINE_CMD_FLAG_STRING
-	},
-	{0, NULL, NULL, 0}
-	};
-
-#ifndef OPENSSL_NO_RSA
-/* Our internal RSA_METHOD that we provide pointers to */
-static RSA_METHOD aep_rsa =
-	{
-	"Aep RSA method",
-	NULL,                /*rsa_pub_encrypt*/
-	NULL,                /*rsa_pub_decrypt*/
-	NULL,                /*rsa_priv_encrypt*/
-	NULL,                /*rsa_priv_encrypt*/
-	aep_rsa_mod_exp,     /*rsa_mod_exp*/
-	aep_mod_exp_mont,    /*bn_mod_exp*/
-	NULL,                /*init*/
-	NULL,                /*finish*/
-	0,                   /*flags*/
-	NULL,                /*app_data*/
-	NULL,                /*rsa_sign*/
-	NULL                 /*rsa_verify*/
-	};
-#endif
-
-#ifndef OPENSSL_NO_DSA
-/* Our internal DSA_METHOD that we provide pointers to */
-static DSA_METHOD aep_dsa =
-	{
-	"Aep DSA method",
-	NULL,                /* dsa_do_sign */
-	NULL,                /* dsa_sign_setup */
-	NULL,                /* dsa_do_verify */
-	aep_dsa_mod_exp,     /* dsa_mod_exp */
-	aep_mod_exp_dsa,     /* bn_mod_exp */
-	NULL,                /* init */
-	NULL,                /* finish */
-	0,                   /* flags */
-	NULL                 /* app_data */
-	};
-#endif
-
-#ifndef OPENSSL_NO_DH
-/* Our internal DH_METHOD that we provide pointers to */
-static DH_METHOD aep_dh =
-	{
-	"Aep DH method",
-	NULL,
-	NULL,
-	aep_mod_exp_dh,
-	NULL,
-	NULL,
-	0,
-	NULL
-	};
-#endif
-
-#ifdef AEPRAND
-/* our internal RAND_method that we provide pointers to  */
-static RAND_METHOD aep_random =
-	{
-	/*"AEP RAND method", */
-	NULL,
-	aep_rand,
-	NULL,
-	NULL,
-	aep_rand,
-	aep_rand_status,
-	};
-#endif
-
-/*Define an array of structures to hold connections*/
-static AEP_CONNECTION_ENTRY aep_app_conn_table[MAX_PROCESS_CONNECTIONS];
-
-/*Used to determine if this is a new process*/
-static pid_t    recorded_pid = 0;
-
-#ifdef AEPRAND
-static AEP_U8   rand_block[RAND_BLK_SIZE];
-static AEP_U32  rand_block_bytes = 0;
-#endif
-
-/* Constants used when creating the ENGINE */
-static const char *engine_aep_id = "aep";
-static const char *engine_aep_name = "Aep hardware engine support";
-
-static int max_key_len = 2176;
-
-
-/* This internal function is used by ENGINE_aep() and possibly by the
- * "dynamic" ENGINE support too */
-static int bind_aep(ENGINE *e)
-	{
-#ifndef OPENSSL_NO_RSA
-	const RSA_METHOD  *meth1;
-#endif
-#ifndef OPENSSL_NO_DSA
-	const DSA_METHOD  *meth2;
-#endif
-#ifndef OPENSSL_NO_DH
-	const DH_METHOD	  *meth3;
-#endif
-
-	if(!ENGINE_set_id(e, engine_aep_id) ||
-		!ENGINE_set_name(e, engine_aep_name) ||
-#ifndef OPENSSL_NO_RSA
-		!ENGINE_set_RSA(e, &aep_rsa) ||
-#endif
-#ifndef OPENSSL_NO_DSA
-		!ENGINE_set_DSA(e, &aep_dsa) ||
-#endif
-#ifndef OPENSSL_NO_DH
-		!ENGINE_set_DH(e, &aep_dh) ||
-#endif
-#ifdef AEPRAND
-		!ENGINE_set_RAND(e, &aep_random) ||
-#endif
-		!ENGINE_set_init_function(e, aep_init) ||
-		!ENGINE_set_destroy_function(e, aep_destroy) ||
-		!ENGINE_set_finish_function(e, aep_finish) ||
-		!ENGINE_set_ctrl_function(e, aep_ctrl) ||
-		!ENGINE_set_cmd_defns(e, aep_cmd_defns))
-		return 0;
-
-#ifndef OPENSSL_NO_RSA
-	/* We know that the "PKCS1_SSLeay()" functions hook properly
-	 * to the aep-specific mod_exp and mod_exp_crt so we use
-	 * those functions. NB: We don't use ENGINE_openssl() or
-	 * anything "more generic" because something like the RSAref
-	 * code may not hook properly, and if you own one of these
-	 * cards then you have the right to do RSA operations on it
-	 * anyway! */
-	meth1 = RSA_PKCS1_SSLeay();
-	aep_rsa.rsa_pub_enc = meth1->rsa_pub_enc;
-	aep_rsa.rsa_pub_dec = meth1->rsa_pub_dec;
-	aep_rsa.rsa_priv_enc = meth1->rsa_priv_enc;
-	aep_rsa.rsa_priv_dec = meth1->rsa_priv_dec;
-#endif
-
-
-#ifndef OPENSSL_NO_DSA
-	/* Use the DSA_OpenSSL() method and just hook the mod_exp-ish
-	 * bits. */
-	meth2 = DSA_OpenSSL();
-	aep_dsa.dsa_do_sign    = meth2->dsa_do_sign;
-	aep_dsa.dsa_sign_setup = meth2->dsa_sign_setup;
-	aep_dsa.dsa_do_verify  = meth2->dsa_do_verify;
-
-	aep_dsa = *DSA_get_default_method(); 
-	aep_dsa.dsa_mod_exp = aep_dsa_mod_exp; 
-	aep_dsa.bn_mod_exp = aep_mod_exp_dsa;
-#endif
-
-#ifndef OPENSSL_NO_DH
-	/* Much the same for Diffie-Hellman */
-	meth3 = DH_OpenSSL();
-	aep_dh.generate_key = meth3->generate_key;
-	aep_dh.compute_key  = meth3->compute_key;
-	aep_dh.bn_mod_exp   = meth3->bn_mod_exp;
-#endif
-
-	/* Ensure the aep error handling is set up */
-	ERR_load_AEPHK_strings();
-
-	return 1;
-}
-
-#ifdef ENGINE_DYNAMIC_SUPPORT
-static int bind_helper(ENGINE *e, const char *id)
-	{
-	if(id && (strcmp(id, engine_aep_id) != 0))
-		return 0;
-	if(!bind_aep(e))
-		return 0;
-	return 1;
-	}       
-IMPLEMENT_DYNAMIC_CHECK_FN()
-IMPLEMENT_DYNAMIC_BIND_FN(bind_helper)
-#else
-static ENGINE *engine_aep(void)
-	{
-	ENGINE *ret = ENGINE_new();
-	if(!ret)
-		return NULL;
-	if(!bind_aep(ret))
-		{
-		ENGINE_free(ret);
-		return NULL;
-		}
-	return ret;
-	}
-
-void ENGINE_load_aep(void)
-	{
-	/* Copied from eng_[openssl|dyn].c */
-	ENGINE *toadd = engine_aep();
-	if(!toadd) return;
-	ENGINE_add(toadd);
-	ENGINE_free(toadd);
-	ERR_clear_error();
-	}
-#endif
-
-/* This is a process-global DSO handle used for loading and unloading
- * the Aep library. NB: This is only set (or unset) during an
- * init() or finish() call (reference counts permitting) and they're
- * operating with global locks, so this should be thread-safe
- * implicitly. */
-static DSO *aep_dso = NULL;
-
-/* These are the static string constants for the DSO file name and the function
- * symbol names to bind to. 
-*/
-static const char *AEP_LIBNAME = NULL;
-static const char *get_AEP_LIBNAME(void)
-	{
-	if(AEP_LIBNAME)
-		return AEP_LIBNAME;
-	return "aep";
-	}
-static void free_AEP_LIBNAME(void)
-	{
-	if(AEP_LIBNAME)
-		OPENSSL_free((void*)AEP_LIBNAME);
-	AEP_LIBNAME = NULL;
-	}
-static long set_AEP_LIBNAME(const char *name)
-	{
-	free_AEP_LIBNAME();
-	return ((AEP_LIBNAME = BUF_strdup(name)) != NULL ? 1 : 0);
-	}
-
-static const char *AEP_F1    = "AEP_ModExp";
-static const char *AEP_F2    = "AEP_ModExpCrt";
-#ifdef AEPRAND
-static const char *AEP_F3    = "AEP_GenRandom";
-#endif
-static const char *AEP_F4    = "AEP_Finalize";
-static const char *AEP_F5    = "AEP_Initialize";
-static const char *AEP_F6    = "AEP_OpenConnection";
-static const char *AEP_F7    = "AEP_SetBNCallBacks";
-static const char *AEP_F8    = "AEP_CloseConnection";
-
-/* These are the function pointers that are (un)set when the library has
- * successfully (un)loaded. */
-static t_AEP_OpenConnection    *p_AEP_OpenConnection  = NULL;
-static t_AEP_CloseConnection   *p_AEP_CloseConnection = NULL;
-static t_AEP_ModExp            *p_AEP_ModExp          = NULL;
-static t_AEP_ModExpCrt         *p_AEP_ModExpCrt       = NULL;
-#ifdef AEPRAND
-static t_AEP_GenRandom         *p_AEP_GenRandom       = NULL;
-#endif
-static t_AEP_Initialize        *p_AEP_Initialize      = NULL;
-static t_AEP_Finalize          *p_AEP_Finalize        = NULL;
-static t_AEP_SetBNCallBacks    *p_AEP_SetBNCallBacks  = NULL;
-
-/* (de)initialisation functions. */
-static int aep_init(ENGINE *e)
-	{
-	t_AEP_ModExp          *p1;
-	t_AEP_ModExpCrt       *p2;
-#ifdef AEPRAND
-	t_AEP_GenRandom       *p3;
-#endif
-	t_AEP_Finalize        *p4;
-	t_AEP_Initialize      *p5;
-	t_AEP_OpenConnection  *p6;
-	t_AEP_SetBNCallBacks  *p7;
-	t_AEP_CloseConnection *p8;
-
-	int to_return = 0;
- 
-	if(aep_dso != NULL)
-		{
-		AEPHKerr(AEPHK_F_AEP_INIT,AEPHK_R_ALREADY_LOADED);
-		goto err;
-		}
-	/* Attempt to load libaep.so. */
-
-	aep_dso = DSO_load(NULL, get_AEP_LIBNAME(), NULL, 0);
-  
-	if(aep_dso == NULL)
-		{
-		AEPHKerr(AEPHK_F_AEP_INIT,AEPHK_R_NOT_LOADED);
-		goto err;
-		}
-
-	if(	!(p1 = (t_AEP_ModExp *)     DSO_bind_func( aep_dso,AEP_F1))  ||
-		!(p2 = (t_AEP_ModExpCrt*)   DSO_bind_func( aep_dso,AEP_F2))  ||
-#ifdef AEPRAND
-		!(p3 = (t_AEP_GenRandom*)   DSO_bind_func( aep_dso,AEP_F3))  ||
-#endif
-		!(p4 = (t_AEP_Finalize*)    DSO_bind_func( aep_dso,AEP_F4))  ||
-		!(p5 = (t_AEP_Initialize*)  DSO_bind_func( aep_dso,AEP_F5))  ||
-		!(p6 = (t_AEP_OpenConnection*) DSO_bind_func( aep_dso,AEP_F6))  ||
-		!(p7 = (t_AEP_SetBNCallBacks*) DSO_bind_func( aep_dso,AEP_F7))  ||
-		!(p8 = (t_AEP_CloseConnection*) DSO_bind_func( aep_dso,AEP_F8)))
-		{
-		AEPHKerr(AEPHK_F_AEP_INIT,AEPHK_R_NOT_LOADED);
-		goto err;
-		}
-
-	/* Copy the pointers */
-  
-	p_AEP_ModExp           = p1;
-	p_AEP_ModExpCrt        = p2;
-#ifdef AEPRAND
-	p_AEP_GenRandom        = p3;
-#endif
-	p_AEP_Finalize         = p4;
-	p_AEP_Initialize       = p5;
-	p_AEP_OpenConnection   = p6;
-	p_AEP_SetBNCallBacks   = p7;
-	p_AEP_CloseConnection  = p8;
- 
-	to_return = 1;
- 
-	return to_return;
-
- err: 
-
-	if(aep_dso)
-		DSO_free(aep_dso);
-		
-	p_AEP_OpenConnection    = NULL;
-	p_AEP_ModExp            = NULL;
-	p_AEP_ModExpCrt         = NULL;
-#ifdef AEPRAND
-	p_AEP_GenRandom         = NULL;
-#endif
-	p_AEP_Initialize        = NULL;
-	p_AEP_Finalize          = NULL;
-	p_AEP_SetBNCallBacks    = NULL;
-	p_AEP_CloseConnection   = NULL;
-
-	return to_return;
-	}
-
-/* Destructor (complements the "ENGINE_aep()" constructor) */
-static int aep_destroy(ENGINE *e)
-	{
-	free_AEP_LIBNAME();
-	ERR_unload_AEPHK_strings();
-	return 1;
-	}
-
-static int aep_finish(ENGINE *e)
-	{
-	int to_return = 0, in_use;
-	AEP_RV rv;
-
-	if(aep_dso == NULL)
-		{
-		AEPHKerr(AEPHK_F_AEP_FINISH,AEPHK_R_NOT_LOADED);
-		goto err;
-		}
-
-	rv = aep_close_all_connections(0, &in_use);
-	if (rv != AEP_R_OK)
-		{
-		AEPHKerr(AEPHK_F_AEP_FINISH,AEPHK_R_CLOSE_HANDLES_FAILED);
-		goto err;
-		}
-	if (in_use)
-		{
-		AEPHKerr(AEPHK_F_AEP_FINISH,AEPHK_R_CONNECTIONS_IN_USE);
-		goto err;
-		}
-
-	rv = p_AEP_Finalize();
-	if (rv != AEP_R_OK)
-		{
-		AEPHKerr(AEPHK_F_AEP_FINISH,AEPHK_R_FINALIZE_FAILED);
-		goto err;
-		}
-
-	if(!DSO_free(aep_dso))
-		{
-		AEPHKerr(AEPHK_F_AEP_FINISH,AEPHK_R_UNIT_FAILURE);
-		goto err;
-		}
-
-	aep_dso = NULL;
-	p_AEP_CloseConnection   = NULL;
-	p_AEP_OpenConnection    = NULL;
-	p_AEP_ModExp            = NULL;
-	p_AEP_ModExpCrt         = NULL;
-#ifdef AEPRAND
-	p_AEP_GenRandom         = NULL;
-#endif
-	p_AEP_Initialize        = NULL;
-	p_AEP_Finalize          = NULL;
-	p_AEP_SetBNCallBacks    = NULL;
-
-	to_return = 1;
- err:
-	return to_return;
-	}
-
-static int aep_ctrl(ENGINE *e, int cmd, long i, void *p, void (*f)())
-	{
-	int initialised = ((aep_dso == NULL) ? 0 : 1);
-	switch(cmd)
-		{
-	case AEP_CMD_SO_PATH:
-		if(p == NULL)
-			{
-			AEPHKerr(AEPHK_F_AEP_CTRL,
-				ERR_R_PASSED_NULL_PARAMETER);
-			return 0;
-			}
-		if(initialised)
-			{
-			AEPHKerr(AEPHK_F_AEP_CTRL,
-				AEPHK_R_ALREADY_LOADED);
-			return 0;
-			}
-		return set_AEP_LIBNAME((const char*)p);
-	default:
-		break;
-		}
-	AEPHKerr(AEPHK_F_AEP_CTRL,AEPHK_R_CTRL_COMMAND_NOT_IMPLEMENTED);
-	return 0;
-	}
-
-static int aep_mod_exp(BIGNUM *r, const BIGNUM *a, const BIGNUM *p,
-	const BIGNUM *m, BN_CTX *ctx)
-	{
-	int to_return = 0;
-	int 	r_len = 0;
-	AEP_CONNECTION_HNDL hConnection;
-	AEP_RV rv;
-	
-	r_len = BN_num_bits(m);
-
-	/* Perform in software if modulus is too large for hardware. */
-
-	if (r_len > max_key_len){
-		AEPHKerr(AEPHK_F_AEP_MOD_EXP, AEPHK_R_SIZE_TOO_LARGE_OR_TOO_SMALL);
-		return BN_mod_exp(r, a, p, m, ctx);
-	} 
-
-	/*Grab a connection from the pool*/
-	rv = aep_get_connection(&hConnection);
-	if (rv != AEP_R_OK)
-		{     
-		AEPHKerr(AEPHK_F_AEP_MOD_EXP,AEPHK_R_GET_HANDLE_FAILED);
-		return BN_mod_exp(r, a, p, m, ctx);
-		}
-
-	/*To the card with the mod exp*/
-	rv = p_AEP_ModExp(hConnection,(void*)a, (void*)p,(void*)m, (void*)r,NULL);
-
-	if (rv !=  AEP_R_OK)
-		{
-		AEPHKerr(AEPHK_F_AEP_MOD_EXP,AEPHK_R_MOD_EXP_FAILED);
-		rv = aep_close_connection(hConnection);
-		return BN_mod_exp(r, a, p, m, ctx);
-		}
-
-	/*Return the connection to the pool*/
-	rv = aep_return_connection(hConnection);
-	if (rv != AEP_R_OK)
-		{
-		AEPHKerr(AEPHK_F_AEP_RAND,AEPHK_R_RETURN_CONNECTION_FAILED); 
-		goto err;
-		}
-
-	to_return = 1;
- err:
-	return to_return;
-	}
-	
-static AEP_RV aep_mod_exp_crt(BIGNUM *r, const BIGNUM *a, const BIGNUM *p,
-	const BIGNUM *q, const BIGNUM *dmp1,
-	const BIGNUM *dmq1,const BIGNUM *iqmp, BN_CTX *ctx)
-	{
-	AEP_RV rv = AEP_R_OK;
-	AEP_CONNECTION_HNDL hConnection;
-
-	/*Grab a connection from the pool*/
-	rv = aep_get_connection(&hConnection);
-	if (rv != AEP_R_OK)
-		{
-		AEPHKerr(AEPHK_F_AEP_MOD_EXP_CRT,AEPHK_R_GET_HANDLE_FAILED);
-		return FAIL_TO_SW;
-		}
-
-	/*To the card with the mod exp*/
-	rv = p_AEP_ModExpCrt(hConnection,(void*)a, (void*)p, (void*)q, (void*)dmp1,(void*)dmq1,
-		(void*)iqmp,(void*)r,NULL);
-	if (rv != AEP_R_OK)
-		{
-		AEPHKerr(AEPHK_F_AEP_MOD_EXP_CRT,AEPHK_R_MOD_EXP_CRT_FAILED);
-		rv = aep_close_connection(hConnection);
-		return FAIL_TO_SW;
-		}
-
-	/*Return the connection to the pool*/
-	rv = aep_return_connection(hConnection);
-	if (rv != AEP_R_OK)
-		{
-		AEPHKerr(AEPHK_F_AEP_RAND,AEPHK_R_RETURN_CONNECTION_FAILED); 
-		goto err;
-		}
- 
- err:
-	return rv;
-	}
-	
-
-#ifdef AEPRAND
-static int aep_rand(unsigned char *buf,int len )
-	{
-	AEP_RV rv = AEP_R_OK;
-	AEP_CONNECTION_HNDL hConnection;
-
-	CRYPTO_w_lock(CRYPTO_LOCK_RAND);
-
-	/*Can the request be serviced with what's already in the buffer?*/
-	if (len <= rand_block_bytes)
-		{
-		memcpy(buf, &rand_block[RAND_BLK_SIZE - rand_block_bytes], len);
-		rand_block_bytes -= len;
-		CRYPTO_w_unlock(CRYPTO_LOCK_RAND);
-		}
-	else
-		/*If not the get another block of random bytes*/
-		{
-		CRYPTO_w_unlock(CRYPTO_LOCK_RAND);
-
-		rv = aep_get_connection(&hConnection);
-		if (rv !=  AEP_R_OK)
-			{ 
-			AEPHKerr(AEPHK_F_AEP_RAND,AEPHK_R_GET_HANDLE_FAILED);             
-			goto err_nounlock;
-			}
-
-		if (len > RAND_BLK_SIZE)
-			{
-			rv = p_AEP_GenRandom(hConnection, len, 2, buf, NULL);
-			if (rv !=  AEP_R_OK)
-				{  
-				AEPHKerr(AEPHK_F_AEP_RAND,AEPHK_R_GET_RANDOM_FAILED); 
-				goto err_nounlock;
-				}
-			}
-		else
-			{
-			CRYPTO_w_lock(CRYPTO_LOCK_RAND);
-
-			rv = p_AEP_GenRandom(hConnection, RAND_BLK_SIZE, 2, &rand_block[0], NULL);
-			if (rv !=  AEP_R_OK)
-				{       
-				AEPHKerr(AEPHK_F_AEP_RAND,AEPHK_R_GET_RANDOM_FAILED); 
-	      
-				goto err;
-				}
-
-			rand_block_bytes = RAND_BLK_SIZE;
-
-			memcpy(buf, &rand_block[RAND_BLK_SIZE - rand_block_bytes], len);
-			rand_block_bytes -= len;
-
-			CRYPTO_w_unlock(CRYPTO_LOCK_RAND);
-			}
-
-		rv = aep_return_connection(hConnection);
-		if (rv != AEP_R_OK)
-			{
-			AEPHKerr(AEPHK_F_AEP_RAND,AEPHK_R_RETURN_CONNECTION_FAILED); 
-	  
-			goto err_nounlock;
-			}
-		}
-  
-	return 1;
- err:
-	CRYPTO_w_unlock(CRYPTO_LOCK_RAND);
- err_nounlock:
-	return 0;
-	}
-	
-static int aep_rand_status(void)
-{
-	return 1;
-}
-#endif
-
-#ifndef OPENSSL_NO_RSA
-static int aep_rsa_mod_exp(BIGNUM *r0, const BIGNUM *I, RSA *rsa)
-	{
-	BN_CTX *ctx = NULL;
-	int to_return = 0;
-	AEP_RV rv = AEP_R_OK;
-
-	if ((ctx = BN_CTX_new()) == NULL)
-		goto err;
-
-	if (!aep_dso)
-		{
-		AEPHKerr(AEPHK_F_AEP_RSA_MOD_EXP,AEPHK_R_NOT_LOADED);
-		goto err;
-		}
-
-	/*See if we have all the necessary bits for a crt*/
-	if (rsa->q && rsa->dmp1 && rsa->dmq1 && rsa->iqmp)
-		{
-		rv =  aep_mod_exp_crt(r0,I,rsa->p,rsa->q, rsa->dmp1,rsa->dmq1,rsa->iqmp,ctx);
-
-		if (rv == FAIL_TO_SW){
-			const RSA_METHOD *meth = RSA_PKCS1_SSLeay();
-			to_return = (*meth->rsa_mod_exp)(r0, I, rsa);
-			goto err;
-		}
-		else if (rv != AEP_R_OK)
-			goto err;
-		}
-	else
-		{
-		if (!rsa->d || !rsa->n)
-			{
-			AEPHKerr(AEPHK_F_AEP_RSA_MOD_EXP,AEPHK_R_MISSING_KEY_COMPONENTS);
-			goto err;
-			}
- 
-		rv = aep_mod_exp(r0,I,rsa->d,rsa->n,ctx);
-		if  (rv != AEP_R_OK)
-			goto err;
-	
-		}
-
-	to_return = 1;
-
- err:
-	if(ctx)
-		BN_CTX_free(ctx);
-	return to_return;
-}
-#endif
-
-#ifndef OPENSSL_NO_DSA
-static int aep_dsa_mod_exp(DSA *dsa, BIGNUM *rr, BIGNUM *a1,
-	BIGNUM *p1, BIGNUM *a2, BIGNUM *p2, BIGNUM *m,
-	BN_CTX *ctx, BN_MONT_CTX *in_mont)
-	{
-	BIGNUM t;
-	int to_return = 0;
-	BN_init(&t);
-
-	/* let rr = a1 ^ p1 mod m */
-	if (!aep_mod_exp(rr,a1,p1,m,ctx)) goto end;
-	/* let t = a2 ^ p2 mod m */
-	if (!aep_mod_exp(&t,a2,p2,m,ctx)) goto end;
-	/* let rr = rr * t mod m */
-	if (!BN_mod_mul(rr,rr,&t,m,ctx)) goto end;
-	to_return = 1;
- end: 
-	BN_free(&t);
-	return to_return;
-	}
-
-static int aep_mod_exp_dsa(DSA *dsa, BIGNUM *r, BIGNUM *a,
-	const BIGNUM *p, const BIGNUM *m, BN_CTX *ctx,
-	BN_MONT_CTX *m_ctx)
-	{  
-	return aep_mod_exp(r, a, p, m, ctx); 
-	}
-#endif
-
-/* This function is aliased to mod_exp (with the mont stuff dropped). */
-static int aep_mod_exp_mont(BIGNUM *r, const BIGNUM *a, const BIGNUM *p,
-	const BIGNUM *m, BN_CTX *ctx, BN_MONT_CTX *m_ctx)
-	{
-	return aep_mod_exp(r, a, p, m, ctx);
-	}
-
-#ifndef OPENSSL_NO_DH
-/* This function is aliased to mod_exp (with the dh and mont dropped). */
-static int aep_mod_exp_dh(const DH *dh, BIGNUM *r, const BIGNUM *a,
-	const BIGNUM *p, const BIGNUM *m, BN_CTX *ctx,
-	BN_MONT_CTX *m_ctx)
-	{
-	return aep_mod_exp(r, a, p, m, ctx);
-	}
-#endif
-
-static AEP_RV aep_get_connection(AEP_CONNECTION_HNDL_PTR phConnection)
-	{
-	int count;
-	AEP_RV rv = AEP_R_OK;
-
-	/*Get the current process id*/
-	pid_t curr_pid;
-
-	CRYPTO_w_lock(CRYPTO_LOCK_ENGINE);
-
-	curr_pid = getpid();
-
-	/*Check if this is the first time this is being called from the current
-	  process*/
-	if (recorded_pid != curr_pid)
-		{
-		/*Remember our pid so we can check if we're in a new process*/
-		recorded_pid = curr_pid;
-
-		/*Call Finalize to make sure we have not inherited some data
-		  from a parent process*/
-		p_AEP_Finalize();
-     
-		/*Initialise the AEP API*/
-		rv = p_AEP_Initialize(NULL);
-
-		if (rv != AEP_R_OK)
-			{
-			AEPHKerr(AEPHK_F_AEP_GET_CONNECTION,AEPHK_R_INIT_FAILURE);
-			recorded_pid = 0;
-			goto end;
-			}
-
-		/*Set the AEP big num call back functions*/
-		rv = p_AEP_SetBNCallBacks(&GetBigNumSize, &MakeAEPBigNum,
-			&ConvertAEPBigNum);
-
-		if (rv != AEP_R_OK)
-			{
-			AEPHKerr(AEPHK_F_AEP_GET_CONNECTION,AEPHK_R_SETBNCALLBACK_FAILURE);
-			recorded_pid = 0;
-			goto end;
-			}
-
-#ifdef AEPRAND
-		/*Reset the rand byte count*/
-		rand_block_bytes = 0;
-#endif
-
-		/*Init the structures*/
-		for (count = 0;count < MAX_PROCESS_CONNECTIONS;count ++)
-			{
-			aep_app_conn_table[count].conn_state = NotConnected;
-			aep_app_conn_table[count].conn_hndl  = 0;
-			}
-
-		/*Open a connection*/
-		rv = p_AEP_OpenConnection(phConnection);
-
-		if (rv != AEP_R_OK)
-			{
-			AEPHKerr(AEPHK_F_AEP_GET_CONNECTION,AEPHK_R_UNIT_FAILURE);
-			recorded_pid = 0;
-			goto end;
-			}
-
-		aep_app_conn_table[0].conn_state = InUse;
-		aep_app_conn_table[0].conn_hndl = *phConnection;
-		goto end;
-		}
-	/*Check the existing connections to see if we can find a free one*/
-	for (count = 0;count < MAX_PROCESS_CONNECTIONS;count ++)
-		{
-		if (aep_app_conn_table[count].conn_state == Connected)
-			{
-			aep_app_conn_table[count].conn_state = InUse;
-			*phConnection = aep_app_conn_table[count].conn_hndl;
-			goto end;
-			}
-		}
-	/*If no connections available, we're going to have to try
-	  to open a new one*/
-	for (count = 0;count < MAX_PROCESS_CONNECTIONS;count ++)
-		{
-		if (aep_app_conn_table[count].conn_state == NotConnected)
-			{
-			/*Open a connection*/
-			rv = p_AEP_OpenConnection(phConnection);
-
-			if (rv != AEP_R_OK)
-				{	      
-				AEPHKerr(AEPHK_F_AEP_GET_CONNECTION,AEPHK_R_UNIT_FAILURE);
-				goto end;
-				}
-
-			aep_app_conn_table[count].conn_state = InUse;
-			aep_app_conn_table[count].conn_hndl = *phConnection;
-			goto end;
-			}
-		}
-	rv = AEP_R_GENERAL_ERROR;
- end:
-	CRYPTO_w_unlock(CRYPTO_LOCK_ENGINE);
-	return rv;
-	}
-
-
-static AEP_RV aep_return_connection(AEP_CONNECTION_HNDL hConnection)
-	{
-	int count;
-
-	CRYPTO_w_lock(CRYPTO_LOCK_ENGINE);
-
-	/*Find the connection item that matches this connection handle*/
-	for(count = 0;count < MAX_PROCESS_CONNECTIONS;count ++)
-		{
-		if (aep_app_conn_table[count].conn_hndl == hConnection)
-			{
-			aep_app_conn_table[count].conn_state = Connected;
-			break;
-			}
-		}
-
-	CRYPTO_w_unlock(CRYPTO_LOCK_ENGINE);
-
-	return AEP_R_OK;
-	}
-
-static AEP_RV aep_close_connection(AEP_CONNECTION_HNDL hConnection)
-	{
-	int count;
-	AEP_RV rv = AEP_R_OK;
-
-	CRYPTO_w_lock(CRYPTO_LOCK_ENGINE);
-
-	/*Find the connection item that matches this connection handle*/
-	for(count = 0;count < MAX_PROCESS_CONNECTIONS;count ++)
-		{
-		if (aep_app_conn_table[count].conn_hndl == hConnection)
-			{
-			rv = p_AEP_CloseConnection(aep_app_conn_table[count].conn_hndl);
-			if (rv != AEP_R_OK)
-				goto end;
-			aep_app_conn_table[count].conn_state = NotConnected;
-			aep_app_conn_table[count].conn_hndl  = 0;
-			break;
-			}
-		}
-
- end:
-	CRYPTO_w_unlock(CRYPTO_LOCK_ENGINE);
-	return rv;
-	}
-
-static AEP_RV aep_close_all_connections(int use_engine_lock, int *in_use)
-	{
-	int count;
-	AEP_RV rv = AEP_R_OK;
-
-	*in_use = 0;
-	if (use_engine_lock) CRYPTO_w_lock(CRYPTO_LOCK_ENGINE);
-	for (count = 0;count < MAX_PROCESS_CONNECTIONS;count ++)
-		{
-		switch (aep_app_conn_table[count].conn_state)
-			{
-		case Connected:
-			rv = p_AEP_CloseConnection(aep_app_conn_table[count].conn_hndl);
-			if (rv != AEP_R_OK)
-				goto end;
-			aep_app_conn_table[count].conn_state = NotConnected;
-			aep_app_conn_table[count].conn_hndl  = 0;
-			break;
-		case InUse:
-			(*in_use)++;
-			break;
-		case NotConnected:
-			break;
-			}
-		}
- end:
-	if (use_engine_lock) CRYPTO_w_unlock(CRYPTO_LOCK_ENGINE);
-	return rv;
-	}
-
-/*BigNum call back functions, used to convert OpenSSL bignums into AEP bignums.
-  Note only 32bit Openssl build support*/
-
-static AEP_RV GetBigNumSize(AEP_VOID_PTR ArbBigNum, AEP_U32* BigNumSize)
-	{
-	BIGNUM* bn;
-
-	/*Cast the ArbBigNum pointer to our BIGNUM struct*/
-	bn = (BIGNUM*) ArbBigNum;
-
-#ifdef SIXTY_FOUR_BIT_LONG
-	*BigNumSize = bn->top << 3;
-#else
-	/*Size of the bignum in bytes is equal to the bn->top (no of 32 bit
-	  words) multiplies by 4*/
-	*BigNumSize = bn->top << 2;
-#endif
-
-	return AEP_R_OK;
-	}
-
-static AEP_RV MakeAEPBigNum(AEP_VOID_PTR ArbBigNum, AEP_U32 BigNumSize,
-	unsigned char* AEP_BigNum)
-	{
-	BIGNUM* bn;
-
-#ifndef SIXTY_FOUR_BIT_LONG
-	unsigned char* buf;
-	int i;
-#endif
-
-	/*Cast the ArbBigNum pointer to our BIGNUM struct*/
-	bn = (BIGNUM*) ArbBigNum;
-
-#ifdef SIXTY_FOUR_BIT_LONG
-  	memcpy(AEP_BigNum, bn->d, BigNumSize);
-#else
-	/*Must copy data into a (monotone) least significant byte first format
-	  performing endian conversion if necessary*/
-	for(i=0;i<bn->top;i++)
-		{
-		buf = (unsigned char*)&bn->d[i];
-
-		*((AEP_U32*)AEP_BigNum) = (AEP_U32)
-			((unsigned) buf[1] << 8 | buf[0]) |
-			((unsigned) buf[3] << 8 | buf[2])  << 16;
-
-		AEP_BigNum += 4;
-		}
-#endif
-
-	return AEP_R_OK;
-	}
-
-/*Turn an AEP Big Num back to a user big num*/
-static AEP_RV ConvertAEPBigNum(void* ArbBigNum, AEP_U32 BigNumSize,
-	unsigned char* AEP_BigNum)
-	{
-	BIGNUM* bn;
-#ifndef SIXTY_FOUR_BIT_LONG
-	int i;
-#endif
-
-	bn = (BIGNUM*)ArbBigNum;
-
-	/*Expand the result bn so that it can hold our big num.
-	  Size is in bits*/
-	bn_expand(bn, (int)(BigNumSize << 3));
-
-#ifdef SIXTY_FOUR_BIT_LONG
-	bn->top = BigNumSize >> 3;
-	
-	if((BigNumSize & 7) != 0)
-		bn->top++;
-
-	memset(bn->d, 0, bn->top << 3);	
-
-	memcpy(bn->d, AEP_BigNum, BigNumSize);
-#else
-	bn->top = BigNumSize >> 2;
- 
-	for(i=0;i<bn->top;i++)
-		{
-		bn->d[i] = (AEP_U32)
-			((unsigned) AEP_BigNum[3] << 8 | AEP_BigNum[2]) << 16 |
-			((unsigned) AEP_BigNum[1] << 8 | AEP_BigNum[0]);
-		AEP_BigNum += 4;
-		}
-#endif
-
-	return AEP_R_OK;
-}	
-	
-#endif /* !OPENSSL_NO_HW_AEP */
-#endif /* !OPENSSL_NO_HW */
diff --git a/crypto/openssl/crypto/engine/hw_aep_err.c b/crypto/openssl/crypto/engine/hw_aep_err.c
deleted file mode 100644
index 092f532946c3..000000000000
--- a/crypto/openssl/crypto/engine/hw_aep_err.c
+++ /dev/null
@@ -1,157 +0,0 @@
-/* hw_aep_err.c */
-/* ====================================================================
- * Copyright (c) 1999 The OpenSSL Project.  All rights reserved.
- *
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions
- * are met:
- *
- * 1. Redistributions of source code must retain the above copyright
- *    notice, this list of conditions and the following disclaimer. 
- *
- * 2. Redistributions in binary form must reproduce the above copyright
- *    notice, this list of conditions and the following disclaimer in
- *    the documentation and/or other materials provided with the
- *    distribution.
- *
- * 3. All advertising materials mentioning features or use of this
- *    software must display the following acknowledgment:
- *    "This product includes software developed by the OpenSSL Project
- *    for use in the OpenSSL Toolkit. (http://www.OpenSSL.org/)"
- *
- * 4. The names "OpenSSL Toolkit" and "OpenSSL Project" must not be used to
- *    endorse or promote products derived from this software without
- *    prior written permission. For written permission, please contact
- *    openssl-core@OpenSSL.org.
- *
- * 5. Products derived from this software may not be called "OpenSSL"
- *    nor may "OpenSSL" appear in their names without prior written
- *    permission of the OpenSSL Project.
- *
- * 6. Redistributions of any form whatsoever must retain the following
- *    acknowledgment:
- *    "This product includes software developed by the OpenSSL Project
- *    for use in the OpenSSL Toolkit (http://www.OpenSSL.org/)"
- *
- * THIS SOFTWARE IS PROVIDED BY THE OpenSSL PROJECT ``AS IS'' AND ANY
- * EXPRESSED OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
- * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR
- * PURPOSE ARE DISCLAIMED.  IN NO EVENT SHALL THE OpenSSL PROJECT OR
- * ITS CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
- * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
- * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
- * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
- * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
- * STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
- * ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED
- * OF THE POSSIBILITY OF SUCH DAMAGE.
- * ====================================================================
- *
- * This product includes cryptographic software written by Eric Young
- * (eay@cryptsoft.com).  This product includes software written by Tim
- * Hudson (tjh@cryptsoft.com).
- *
- */
-
-/* NOTE: this file was auto generated by the mkerr.pl script: any changes
- * made to it will be overwritten when the script next updates this file,
- * only reason strings will be preserved.
- */
-
-#include <stdio.h>
-#include <openssl/err.h>
-#include "hw_aep_err.h"
-
-/* BEGIN ERROR CODES */
-#ifndef OPENSSL_NO_ERR
-static ERR_STRING_DATA AEPHK_str_functs[]=
-	{
-{ERR_PACK(0,AEPHK_F_AEP_CTRL,0),	"AEP_CTRL"},
-{ERR_PACK(0,AEPHK_F_AEP_FINISH,0),	"AEP_FINISH"},
-{ERR_PACK(0,AEPHK_F_AEP_GET_CONNECTION,0),	"AEP_GET_CONNECTION"},
-{ERR_PACK(0,AEPHK_F_AEP_INIT,0),	"AEP_INIT"},
-{ERR_PACK(0,AEPHK_F_AEP_MOD_EXP,0),	"AEP_MOD_EXP"},
-{ERR_PACK(0,AEPHK_F_AEP_MOD_EXP_CRT,0),	"AEP_MOD_EXP_CRT"},
-{ERR_PACK(0,AEPHK_F_AEP_RAND,0),	"AEP_RAND"},
-{ERR_PACK(0,AEPHK_F_AEP_RSA_MOD_EXP,0),	"AEP_RSA_MOD_EXP"},
-{0,NULL}
-	};
-
-static ERR_STRING_DATA AEPHK_str_reasons[]=
-	{
-{AEPHK_R_ALREADY_LOADED                  ,"already loaded"},
-{AEPHK_R_CLOSE_HANDLES_FAILED            ,"close handles failed"},
-{AEPHK_R_CONNECTIONS_IN_USE              ,"connections in use"},
-{AEPHK_R_CTRL_COMMAND_NOT_IMPLEMENTED    ,"ctrl command not implemented"},
-{AEPHK_R_FINALIZE_FAILED                 ,"finalize failed"},
-{AEPHK_R_GET_HANDLE_FAILED               ,"get handle failed"},
-{AEPHK_R_GET_RANDOM_FAILED               ,"get random failed"},
-{AEPHK_R_INIT_FAILURE                    ,"init failure"},
-{AEPHK_R_MISSING_KEY_COMPONENTS          ,"missing key components"},
-{AEPHK_R_MOD_EXP_CRT_FAILED              ,"mod exp crt failed"},
-{AEPHK_R_MOD_EXP_FAILED                  ,"mod exp failed"},
-{AEPHK_R_NOT_LOADED                      ,"not loaded"},
-{AEPHK_R_OK                              ,"ok"},
-{AEPHK_R_RETURN_CONNECTION_FAILED        ,"return connection failed"},
-{AEPHK_R_SETBNCALLBACK_FAILURE           ,"setbncallback failure"},
-{AEPHK_R_SIZE_TOO_LARGE_OR_TOO_SMALL     ,"size too large or too small"},
-{AEPHK_R_UNIT_FAILURE                    ,"unit failure"},
-{0,NULL}
-	};
-
-#endif
-
-#ifdef AEPHK_LIB_NAME
-static ERR_STRING_DATA AEPHK_lib_name[]=
-        {
-{0	,AEPHK_LIB_NAME},
-{0,NULL}
-	};
-#endif
-
-
-static int AEPHK_lib_error_code=0;
-static int AEPHK_error_init=1;
-
-static void ERR_load_AEPHK_strings(void)
-	{
-	if (AEPHK_lib_error_code == 0)
-		AEPHK_lib_error_code=ERR_get_next_error_library();
-
-	if (AEPHK_error_init)
-		{
-		AEPHK_error_init=0;
-#ifndef OPENSSL_NO_ERR
-		ERR_load_strings(AEPHK_lib_error_code,AEPHK_str_functs);
-		ERR_load_strings(AEPHK_lib_error_code,AEPHK_str_reasons);
-#endif
-
-#ifdef AEPHK_LIB_NAME
-		AEPHK_lib_name->error = ERR_PACK(AEPHK_lib_error_code,0,0);
-		ERR_load_strings(0,AEPHK_lib_name);
-#endif
-		}
-	}
-
-static void ERR_unload_AEPHK_strings(void)
-	{
-	if (AEPHK_error_init == 0)
-		{
-#ifndef OPENSSL_NO_ERR
-		ERR_unload_strings(AEPHK_lib_error_code,AEPHK_str_functs);
-		ERR_unload_strings(AEPHK_lib_error_code,AEPHK_str_reasons);
-#endif
-
-#ifdef AEPHK_LIB_NAME
-		ERR_unload_strings(0,AEPHK_lib_name);
-#endif
-		AEPHK_error_init=1;
-		}
-	}
-
-static void ERR_AEPHK_error(int function, int reason, char *file, int line)
-	{
-	if (AEPHK_lib_error_code == 0)
-		AEPHK_lib_error_code=ERR_get_next_error_library();
-	ERR_PUT_error(AEPHK_lib_error_code,function,reason,file,line);
-	}
diff --git a/crypto/openssl/crypto/engine/hw_aep_err.h b/crypto/openssl/crypto/engine/hw_aep_err.h
deleted file mode 100644
index 8fe4cf921f06..000000000000
--- a/crypto/openssl/crypto/engine/hw_aep_err.h
+++ /dev/null
@@ -1,101 +0,0 @@
-/* ====================================================================
- * Copyright (c) 2001 The OpenSSL Project.  All rights reserved.
- *
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions
- * are met:
- *
- * 1. Redistributions of source code must retain the above copyright
- *    notice, this list of conditions and the following disclaimer. 
- *
- * 2. Redistributions in binary form must reproduce the above copyright
- *    notice, this list of conditions and the following disclaimer in
- *    the documentation and/or other materials provided with the
- *    distribution.
- *
- * 3. All advertising materials mentioning features or use of this
- *    software must display the following acknowledgment:
- *    "This product includes software developed by the OpenSSL Project
- *    for use in the OpenSSL Toolkit. (http://www.openssl.org/)"
- *
- * 4. The names "OpenSSL Toolkit" and "OpenSSL Project" must not be used to
- *    endorse or promote products derived from this software without
- *    prior written permission. For written permission, please contact
- *    openssl-core@openssl.org.
- *
- * 5. Products derived from this software may not be called "OpenSSL"
- *    nor may "OpenSSL" appear in their names without prior written
- *    permission of the OpenSSL Project.
- *
- * 6. Redistributions of any form whatsoever must retain the following
- *    acknowledgment:
- *    "This product includes software developed by the OpenSSL Project
- *    for use in the OpenSSL Toolkit (http://www.openssl.org/)"
- *
- * THIS SOFTWARE IS PROVIDED BY THE OpenSSL PROJECT ``AS IS'' AND ANY
- * EXPRESSED OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
- * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR
- * PURPOSE ARE DISCLAIMED.  IN NO EVENT SHALL THE OpenSSL PROJECT OR
- * ITS CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
- * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
- * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
- * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
- * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
- * STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
- * ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED
- * OF THE POSSIBILITY OF SUCH DAMAGE.
- * ====================================================================
- *
- * This product includes cryptographic software written by Eric Young
- * (eay@cryptsoft.com).  This product includes software written by Tim
- * Hudson (tjh@cryptsoft.com).
- *
- */
-
-#ifndef HEADER_AEPHK_ERR_H
-#define HEADER_AEPHK_ERR_H
-
-/* BEGIN ERROR CODES */
-/* The following lines are auto generated by the script mkerr.pl. Any changes
- * made after this point may be overwritten when the script is next run.
- */
-static void ERR_load_AEPHK_strings(void);
-static void ERR_unload_AEPHK_strings(void);
-static void ERR_AEPHK_error(int function, int reason, char *file, int line);
-#define AEPHKerr(f,r) ERR_AEPHK_error((f),(r),__FILE__,__LINE__)
-
-/* Error codes for the AEPHK functions. */
-
-/* Function codes. */
-#define AEPHK_F_AEP_CTRL				 100
-#define AEPHK_F_AEP_FINISH				 101
-#define AEPHK_F_AEP_GET_CONNECTION			 102
-#define AEPHK_F_AEP_INIT				 103
-#define AEPHK_F_AEP_MOD_EXP				 104
-#define AEPHK_F_AEP_MOD_EXP_CRT				 105
-#define AEPHK_F_AEP_RAND				 106
-#define AEPHK_F_AEP_RSA_MOD_EXP				 107
-
-/* Reason codes. */
-#define AEPHK_R_ALREADY_LOADED				 100
-#define AEPHK_R_CLOSE_HANDLES_FAILED			 101
-#define AEPHK_R_CONNECTIONS_IN_USE			 102
-#define AEPHK_R_CTRL_COMMAND_NOT_IMPLEMENTED		 103
-#define AEPHK_R_FINALIZE_FAILED				 104
-#define AEPHK_R_GET_HANDLE_FAILED			 105
-#define AEPHK_R_GET_RANDOM_FAILED			 106
-#define AEPHK_R_INIT_FAILURE				 107
-#define AEPHK_R_MISSING_KEY_COMPONENTS			 108
-#define AEPHK_R_MOD_EXP_CRT_FAILED			 109
-#define AEPHK_R_MOD_EXP_FAILED				 110
-#define AEPHK_R_NOT_LOADED				 111
-#define AEPHK_R_OK					 112
-#define AEPHK_R_RETURN_CONNECTION_FAILED		 113
-#define AEPHK_R_SETBNCALLBACK_FAILURE			 114
-#define AEPHK_R_SIZE_TOO_LARGE_OR_TOO_SMALL		 116
-#define AEPHK_R_UNIT_FAILURE				 115
-
-#ifdef  __cplusplus
-}
-#endif
-#endif
diff --git a/crypto/openssl/crypto/engine/hw_atalla.c b/crypto/openssl/crypto/engine/hw_atalla.c
deleted file mode 100644
index e9eff9fad11e..000000000000
--- a/crypto/openssl/crypto/engine/hw_atalla.c
+++ /dev/null
@@ -1,594 +0,0 @@
-/* crypto/engine/hw_atalla.c */
-/* Written by Geoff Thorpe (geoff@geoffthorpe.net) for the OpenSSL
- * project 2000.
- */
-/* ====================================================================
- * Copyright (c) 1999-2001 The OpenSSL Project.  All rights reserved.
- *
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions
- * are met:
- *
- * 1. Redistributions of source code must retain the above copyright
- *    notice, this list of conditions and the following disclaimer. 
- *
- * 2. Redistributions in binary form must reproduce the above copyright
- *    notice, this list of conditions and the following disclaimer in
- *    the documentation and/or other materials provided with the
- *    distribution.
- *
- * 3. All advertising materials mentioning features or use of this
- *    software must display the following acknowledgment:
- *    "This product includes software developed by the OpenSSL Project
- *    for use in the OpenSSL Toolkit. (http://www.OpenSSL.org/)"
- *
- * 4. The names "OpenSSL Toolkit" and "OpenSSL Project" must not be used to
- *    endorse or promote products derived from this software without
- *    prior written permission. For written permission, please contact
- *    licensing@OpenSSL.org.
- *
- * 5. Products derived from this software may not be called "OpenSSL"
- *    nor may "OpenSSL" appear in their names without prior written
- *    permission of the OpenSSL Project.
- *
- * 6. Redistributions of any form whatsoever must retain the following
- *    acknowledgment:
- *    "This product includes software developed by the OpenSSL Project
- *    for use in the OpenSSL Toolkit (http://www.OpenSSL.org/)"
- *
- * THIS SOFTWARE IS PROVIDED BY THE OpenSSL PROJECT ``AS IS'' AND ANY
- * EXPRESSED OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
- * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR
- * PURPOSE ARE DISCLAIMED.  IN NO EVENT SHALL THE OpenSSL PROJECT OR
- * ITS CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
- * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
- * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
- * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
- * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
- * STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
- * ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED
- * OF THE POSSIBILITY OF SUCH DAMAGE.
- * ====================================================================
- *
- * This product includes cryptographic software written by Eric Young
- * (eay@cryptsoft.com).  This product includes software written by Tim
- * Hudson (tjh@cryptsoft.com).
- *
- */
-
-#include <stdio.h>
-#include <openssl/crypto.h>
-#include "cryptlib.h"
-#include <openssl/dso.h>
-#include <openssl/engine.h>
-
-#ifndef OPENSSL_NO_HW
-#ifndef OPENSSL_NO_HW_ATALLA
-
-#ifdef FLAT_INC
-#include "atalla.h"
-#else
-#include "vendor_defns/atalla.h"
-#endif
-
-#define ATALLA_LIB_NAME "atalla engine"
-#include "hw_atalla_err.c"
-
-static int atalla_destroy(ENGINE *e);
-static int atalla_init(ENGINE *e);
-static int atalla_finish(ENGINE *e);
-static int atalla_ctrl(ENGINE *e, int cmd, long i, void *p, void (*f)());
-
-/* BIGNUM stuff */
-static int atalla_mod_exp(BIGNUM *r, const BIGNUM *a, const BIGNUM *p,
-		const BIGNUM *m, BN_CTX *ctx);
-
-#ifndef OPENSSL_NO_RSA
-/* RSA stuff */
-static int atalla_rsa_mod_exp(BIGNUM *r0, const BIGNUM *I, RSA *rsa);
-#endif
-/* This function is aliased to mod_exp (with the mont stuff dropped). */
-static int atalla_mod_exp_mont(BIGNUM *r, const BIGNUM *a, const BIGNUM *p,
-		const BIGNUM *m, BN_CTX *ctx, BN_MONT_CTX *m_ctx);
-
-#ifndef OPENSSL_NO_DSA
-/* DSA stuff */
-static int atalla_dsa_mod_exp(DSA *dsa, BIGNUM *rr, BIGNUM *a1,
-		BIGNUM *p1, BIGNUM *a2, BIGNUM *p2, BIGNUM *m,
-		BN_CTX *ctx, BN_MONT_CTX *in_mont);
-static int atalla_mod_exp_dsa(DSA *dsa, BIGNUM *r, BIGNUM *a,
-		const BIGNUM *p, const BIGNUM *m, BN_CTX *ctx,
-		BN_MONT_CTX *m_ctx);
-#endif
-
-#ifndef OPENSSL_NO_DH
-/* DH stuff */
-/* This function is alised to mod_exp (with the DH and mont dropped). */
-static int atalla_mod_exp_dh(const DH *dh, BIGNUM *r,
-		const BIGNUM *a, const BIGNUM *p,
-		const BIGNUM *m, BN_CTX *ctx, BN_MONT_CTX *m_ctx);
-#endif
-
-/* The definitions for control commands specific to this engine */
-#define ATALLA_CMD_SO_PATH		ENGINE_CMD_BASE
-static const ENGINE_CMD_DEFN atalla_cmd_defns[] = {
-	{ATALLA_CMD_SO_PATH,
-		"SO_PATH",
-		"Specifies the path to the 'atasi' shared library",
-		ENGINE_CMD_FLAG_STRING},
-	{0, NULL, NULL, 0}
-	};
-
-#ifndef OPENSSL_NO_RSA
-/* Our internal RSA_METHOD that we provide pointers to */
-static RSA_METHOD atalla_rsa =
-	{
-	"Atalla RSA method",
-	NULL,
-	NULL,
-	NULL,
-	NULL,
-	atalla_rsa_mod_exp,
-	atalla_mod_exp_mont,
-	NULL,
-	NULL,
-	0,
-	NULL,
-	NULL,
-	NULL
-	};
-#endif
-
-#ifndef OPENSSL_NO_DSA
-/* Our internal DSA_METHOD that we provide pointers to */
-static DSA_METHOD atalla_dsa =
-	{
-	"Atalla DSA method",
-	NULL, /* dsa_do_sign */
-	NULL, /* dsa_sign_setup */
-	NULL, /* dsa_do_verify */
-	atalla_dsa_mod_exp, /* dsa_mod_exp */
-	atalla_mod_exp_dsa, /* bn_mod_exp */
-	NULL, /* init */
-	NULL, /* finish */
-	0, /* flags */
-	NULL /* app_data */
-	};
-#endif
-
-#ifndef OPENSSL_NO_DH
-/* Our internal DH_METHOD that we provide pointers to */
-static DH_METHOD atalla_dh =
-	{
-	"Atalla DH method",
-	NULL,
-	NULL,
-	atalla_mod_exp_dh,
-	NULL,
-	NULL,
-	0,
-	NULL
-	};
-#endif
-
-/* Constants used when creating the ENGINE */
-static const char *engine_atalla_id = "atalla";
-static const char *engine_atalla_name = "Atalla hardware engine support";
-
-/* This internal function is used by ENGINE_atalla() and possibly by the
- * "dynamic" ENGINE support too */
-static int bind_helper(ENGINE *e)
-	{
-#ifndef OPENSSL_NO_RSA
-	const RSA_METHOD *meth1;
-#endif
-#ifndef OPENSSL_NO_DSA
-	const DSA_METHOD *meth2;
-#endif
-#ifndef OPENSSL_NO_DH
-	const DH_METHOD *meth3;
-#endif
-	if(!ENGINE_set_id(e, engine_atalla_id) ||
-			!ENGINE_set_name(e, engine_atalla_name) ||
-#ifndef OPENSSL_NO_RSA
-			!ENGINE_set_RSA(e, &atalla_rsa) ||
-#endif
-#ifndef OPENSSL_NO_DSA
-			!ENGINE_set_DSA(e, &atalla_dsa) ||
-#endif
-#ifndef OPENSSL_NO_DH
-			!ENGINE_set_DH(e, &atalla_dh) ||
-#endif
-			!ENGINE_set_destroy_function(e, atalla_destroy) ||
-			!ENGINE_set_init_function(e, atalla_init) ||
-			!ENGINE_set_finish_function(e, atalla_finish) ||
-			!ENGINE_set_ctrl_function(e, atalla_ctrl) ||
-			!ENGINE_set_cmd_defns(e, atalla_cmd_defns))
-		return 0;
-
-#ifndef OPENSSL_NO_RSA
-	/* We know that the "PKCS1_SSLeay()" functions hook properly
-	 * to the atalla-specific mod_exp and mod_exp_crt so we use
-	 * those functions. NB: We don't use ENGINE_openssl() or
-	 * anything "more generic" because something like the RSAref
-	 * code may not hook properly, and if you own one of these
-	 * cards then you have the right to do RSA operations on it
-	 * anyway! */ 
-	meth1 = RSA_PKCS1_SSLeay();
-	atalla_rsa.rsa_pub_enc = meth1->rsa_pub_enc;
-	atalla_rsa.rsa_pub_dec = meth1->rsa_pub_dec;
-	atalla_rsa.rsa_priv_enc = meth1->rsa_priv_enc;
-	atalla_rsa.rsa_priv_dec = meth1->rsa_priv_dec;
-#endif
-
-#ifndef OPENSSL_NO_DSA
-	/* Use the DSA_OpenSSL() method and just hook the mod_exp-ish
-	 * bits. */
-	meth2 = DSA_OpenSSL();
-	atalla_dsa.dsa_do_sign = meth2->dsa_do_sign;
-	atalla_dsa.dsa_sign_setup = meth2->dsa_sign_setup;
-	atalla_dsa.dsa_do_verify = meth2->dsa_do_verify;
-#endif
-
-#ifndef OPENSSL_NO_DH
-	/* Much the same for Diffie-Hellman */
-	meth3 = DH_OpenSSL();
-	atalla_dh.generate_key = meth3->generate_key;
-	atalla_dh.compute_key = meth3->compute_key;
-#endif
-
-	/* Ensure the atalla error handling is set up */
-	ERR_load_ATALLA_strings();
-	return 1;
-	}
-
-#ifndef ENGINE_DYNAMIC_SUPPORT
-static ENGINE *engine_atalla(void)
-	{
-	ENGINE *ret = ENGINE_new();
-	if(!ret)
-		return NULL;
-	if(!bind_helper(ret))
-		{
-		ENGINE_free(ret);
-		return NULL;
-		}
-	return ret;
-	}
-
-void ENGINE_load_atalla(void)
-	{
-	/* Copied from eng_[openssl|dyn].c */
-	ENGINE *toadd = engine_atalla();
-	if(!toadd) return;
-	ENGINE_add(toadd);
-	ENGINE_free(toadd);
-	ERR_clear_error();
-	}
-#endif
-
-/* This is a process-global DSO handle used for loading and unloading
- * the Atalla library. NB: This is only set (or unset) during an
- * init() or finish() call (reference counts permitting) and they're
- * operating with global locks, so this should be thread-safe
- * implicitly. */
-static DSO *atalla_dso = NULL;
-
-/* These are the function pointers that are (un)set when the library has
- * successfully (un)loaded. */
-static tfnASI_GetHardwareConfig *p_Atalla_GetHardwareConfig = NULL;
-static tfnASI_RSAPrivateKeyOpFn *p_Atalla_RSAPrivateKeyOpFn = NULL;
-static tfnASI_GetPerformanceStatistics *p_Atalla_GetPerformanceStatistics = NULL;
-
-/* These are the static string constants for the DSO file name and the function
- * symbol names to bind to. Regrettably, the DSO name on *nix appears to be
- * "atasi.so" rather than something more consistent like "libatasi.so". At the
- * time of writing, I'm not sure what the file name on win32 is but clearly
- * native name translation is not possible (eg libatasi.so on *nix, and
- * atasi.dll on win32). For the purposes of testing, I have created a symbollic
- * link called "libatasi.so" so that we can use native name-translation - a
- * better solution will be needed. */
-static const char *ATALLA_LIBNAME = NULL;
-static const char *get_ATALLA_LIBNAME(void)
-	{
-		if(ATALLA_LIBNAME)
-			return ATALLA_LIBNAME;
-		return "atasi";
-	}
-static void free_ATALLA_LIBNAME(void)
-	{
-		if(ATALLA_LIBNAME)
-			OPENSSL_free((void*)ATALLA_LIBNAME);
-		ATALLA_LIBNAME = NULL;
-	}
-static long set_ATALLA_LIBNAME(const char *name)
-	{
-	free_ATALLA_LIBNAME();
-	return (((ATALLA_LIBNAME = BUF_strdup(name)) != NULL) ? 1 : 0);
-	}
-static const char *ATALLA_F1 = "ASI_GetHardwareConfig";
-static const char *ATALLA_F2 = "ASI_RSAPrivateKeyOpFn";
-static const char *ATALLA_F3 = "ASI_GetPerformanceStatistics";
-
-/* Destructor (complements the "ENGINE_atalla()" constructor) */
-static int atalla_destroy(ENGINE *e)
-	{
-	free_ATALLA_LIBNAME();
-	/* Unload the atalla error strings so any error state including our
-	 * functs or reasons won't lead to a segfault (they simply get displayed
-	 * without corresponding string data because none will be found). */
-	ERR_unload_ATALLA_strings();
-	return 1;
-	}
-
-/* (de)initialisation functions. */
-static int atalla_init(ENGINE *e)
-	{
-	tfnASI_GetHardwareConfig *p1;
-	tfnASI_RSAPrivateKeyOpFn *p2;
-	tfnASI_GetPerformanceStatistics *p3;
-	/* Not sure of the origin of this magic value, but Ben's code had it
-	 * and it seemed to have been working for a few people. :-) */
-	unsigned int config_buf[1024];
-
-	if(atalla_dso != NULL)
-		{
-		ATALLAerr(ATALLA_F_ATALLA_INIT,ATALLA_R_ALREADY_LOADED);
-		goto err;
-		}
-	/* Attempt to load libatasi.so/atasi.dll/whatever. Needs to be
-	 * changed unfortunately because the Atalla drivers don't have
-	 * standard library names that can be platform-translated well. */
-	/* TODO: Work out how to actually map to the names the Atalla
-	 * drivers really use - for now a symbollic link needs to be
-	 * created on the host system from libatasi.so to atasi.so on
-	 * unix variants. */
-	atalla_dso = DSO_load(NULL, get_ATALLA_LIBNAME(), NULL, 0);
-	if(atalla_dso == NULL)
-		{
-		ATALLAerr(ATALLA_F_ATALLA_INIT,ATALLA_R_NOT_LOADED);
-		goto err;
-		}
-	if(!(p1 = (tfnASI_GetHardwareConfig *)DSO_bind_func(
-				atalla_dso, ATALLA_F1)) ||
-			!(p2 = (tfnASI_RSAPrivateKeyOpFn *)DSO_bind_func(
-				atalla_dso, ATALLA_F2)) ||
-			!(p3 = (tfnASI_GetPerformanceStatistics *)DSO_bind_func(
-				atalla_dso, ATALLA_F3)))
-		{
-		ATALLAerr(ATALLA_F_ATALLA_INIT,ATALLA_R_NOT_LOADED);
-		goto err;
-		}
-	/* Copy the pointers */
-	p_Atalla_GetHardwareConfig = p1;
-	p_Atalla_RSAPrivateKeyOpFn = p2;
-	p_Atalla_GetPerformanceStatistics = p3;
-	/* Perform a basic test to see if there's actually any unit
-	 * running. */
-	if(p1(0L, config_buf) != 0)
-		{
-		ATALLAerr(ATALLA_F_ATALLA_INIT,ATALLA_R_UNIT_FAILURE);
-		goto err;
-		}
-	/* Everything's fine. */
-	return 1;
-err:
-	if(atalla_dso)
-		DSO_free(atalla_dso);
-	p_Atalla_GetHardwareConfig = NULL;
-	p_Atalla_RSAPrivateKeyOpFn = NULL;
-	p_Atalla_GetPerformanceStatistics = NULL;
-	return 0;
-	}
-
-static int atalla_finish(ENGINE *e)
-	{
-	free_ATALLA_LIBNAME();
-	if(atalla_dso == NULL)
-		{
-		ATALLAerr(ATALLA_F_ATALLA_FINISH,ATALLA_R_NOT_LOADED);
-		return 0;
-		}
-	if(!DSO_free(atalla_dso))
-		{
-		ATALLAerr(ATALLA_F_ATALLA_FINISH,ATALLA_R_UNIT_FAILURE);
-		return 0;
-		}
-	atalla_dso = NULL;
-	p_Atalla_GetHardwareConfig = NULL;
-	p_Atalla_RSAPrivateKeyOpFn = NULL;
-	p_Atalla_GetPerformanceStatistics = NULL;
-	return 1;
-	}
-
-static int atalla_ctrl(ENGINE *e, int cmd, long i, void *p, void (*f)())
-	{
-	int initialised = ((atalla_dso == NULL) ? 0 : 1);
-	switch(cmd)
-		{
-	case ATALLA_CMD_SO_PATH:
-		if(p == NULL)
-			{
-			ATALLAerr(ATALLA_F_ATALLA_CTRL,ERR_R_PASSED_NULL_PARAMETER);
-			return 0;
-			}
-		if(initialised)
-			{
-			ATALLAerr(ATALLA_F_ATALLA_CTRL,ATALLA_R_ALREADY_LOADED);
-			return 0;
-			}
-		return set_ATALLA_LIBNAME((const char *)p);
-	default:
-		break;
-		}
-	ATALLAerr(ATALLA_F_ATALLA_CTRL,ATALLA_R_CTRL_COMMAND_NOT_IMPLEMENTED);
-	return 0;
-	}
-
-static int atalla_mod_exp(BIGNUM *r, const BIGNUM *a, const BIGNUM *p,
-			const BIGNUM *m, BN_CTX *ctx)
-	{
-	/* I need somewhere to store temporary serialised values for
-	 * use with the Atalla API calls. A neat cheat - I'll use
-	 * BIGNUMs from the BN_CTX but access their arrays directly as
-	 * byte arrays <grin>. This way I don't have to clean anything
-	 * up. */
-	BIGNUM *modulus;
-	BIGNUM *exponent;
-	BIGNUM *argument;
-	BIGNUM *result;
-	RSAPrivateKey keydata;
-	int to_return, numbytes;
-
-	modulus = exponent = argument = result = NULL;
-	to_return = 0; /* expect failure */
-
-	if(!atalla_dso)
-		{
-		ATALLAerr(ATALLA_F_ATALLA_MOD_EXP,ATALLA_R_NOT_LOADED);
-		goto err;
-		}
-	/* Prepare the params */
-	BN_CTX_start(ctx);
-	modulus = BN_CTX_get(ctx);
-	exponent = BN_CTX_get(ctx);
-	argument = BN_CTX_get(ctx);
-	result = BN_CTX_get(ctx);
-	if (!result)
-		{
-		ATALLAerr(ATALLA_F_ATALLA_MOD_EXP,ATALLA_R_BN_CTX_FULL);
-		goto err;
-		}
-	if(!bn_wexpand(modulus, m->top) || !bn_wexpand(exponent, m->top) ||
-	   !bn_wexpand(argument, m->top) || !bn_wexpand(result, m->top))
-		{
-		ATALLAerr(ATALLA_F_ATALLA_MOD_EXP,ATALLA_R_BN_EXPAND_FAIL);
-		goto err;
-		}
-	/* Prepare the key-data */
-	memset(&keydata, 0,sizeof keydata);
-	numbytes = BN_num_bytes(m);
-	memset(exponent->d, 0, numbytes);
-	memset(modulus->d, 0, numbytes);
-	BN_bn2bin(p, (unsigned char *)exponent->d + numbytes - BN_num_bytes(p));
-	BN_bn2bin(m, (unsigned char *)modulus->d + numbytes - BN_num_bytes(m));
-	keydata.privateExponent.data = (unsigned char *)exponent->d;
-	keydata.privateExponent.len = numbytes;
-	keydata.modulus.data = (unsigned char *)modulus->d;
-	keydata.modulus.len = numbytes;
-	/* Prepare the argument */
-	memset(argument->d, 0, numbytes);
-	memset(result->d, 0, numbytes);
-	BN_bn2bin(a, (unsigned char *)argument->d + numbytes - BN_num_bytes(a));
-	/* Perform the operation */
-	if(p_Atalla_RSAPrivateKeyOpFn(&keydata, (unsigned char *)result->d,
-			(unsigned char *)argument->d,
-			keydata.modulus.len) != 0)
-		{
-		ATALLAerr(ATALLA_F_ATALLA_MOD_EXP,ATALLA_R_REQUEST_FAILED);
-		goto err;
-		}
-	/* Convert the response */
-	BN_bin2bn((unsigned char *)result->d, numbytes, r);
-	to_return = 1;
-err:
-	BN_CTX_end(ctx);
-	return to_return;
-	}
-
-#ifndef OPENSSL_NO_RSA
-static int atalla_rsa_mod_exp(BIGNUM *r0, const BIGNUM *I, RSA *rsa)
-	{
-	BN_CTX *ctx = NULL;
-	int to_return = 0;
-
-	if(!atalla_dso)
-		{
-		ATALLAerr(ATALLA_F_ATALLA_RSA_MOD_EXP,ATALLA_R_NOT_LOADED);
-		goto err;
-		}
-	if((ctx = BN_CTX_new()) == NULL)
-		goto err;
-	if(!rsa->d || !rsa->n)
-		{
-		ATALLAerr(ATALLA_F_ATALLA_RSA_MOD_EXP,ATALLA_R_MISSING_KEY_COMPONENTS);
-		goto err;
-		}
-	to_return = atalla_mod_exp(r0, I, rsa->d, rsa->n, ctx);
-err:
-	if(ctx)
-		BN_CTX_free(ctx);
-	return to_return;
-	}
-#endif
-
-#ifndef OPENSSL_NO_DSA
-/* This code was liberated and adapted from the commented-out code in
- * dsa_ossl.c. Because of the unoptimised form of the Atalla acceleration
- * (it doesn't have a CRT form for RSA), this function means that an
- * Atalla system running with a DSA server certificate can handshake
- * around 5 or 6 times faster/more than an equivalent system running with
- * RSA. Just check out the "signs" statistics from the RSA and DSA parts
- * of "openssl speed -engine atalla dsa1024 rsa1024". */
-static int atalla_dsa_mod_exp(DSA *dsa, BIGNUM *rr, BIGNUM *a1,
-		BIGNUM *p1, BIGNUM *a2, BIGNUM *p2, BIGNUM *m,
-		BN_CTX *ctx, BN_MONT_CTX *in_mont)
-	{
-	BIGNUM t;
-	int to_return = 0;
- 
-	BN_init(&t);
-	/* let rr = a1 ^ p1 mod m */
-	if (!atalla_mod_exp(rr,a1,p1,m,ctx)) goto end;
-	/* let t = a2 ^ p2 mod m */
-	if (!atalla_mod_exp(&t,a2,p2,m,ctx)) goto end;
-	/* let rr = rr * t mod m */
-	if (!BN_mod_mul(rr,rr,&t,m,ctx)) goto end;
-	to_return = 1;
-end:
-	BN_free(&t);
-	return to_return;
-	}
-
-static int atalla_mod_exp_dsa(DSA *dsa, BIGNUM *r, BIGNUM *a,
-		const BIGNUM *p, const BIGNUM *m, BN_CTX *ctx,
-		BN_MONT_CTX *m_ctx)
-	{
-	return atalla_mod_exp(r, a, p, m, ctx);
-	}
-#endif
-
-/* This function is aliased to mod_exp (with the mont stuff dropped). */
-static int atalla_mod_exp_mont(BIGNUM *r, const BIGNUM *a, const BIGNUM *p,
-		const BIGNUM *m, BN_CTX *ctx, BN_MONT_CTX *m_ctx)
-	{
-	return atalla_mod_exp(r, a, p, m, ctx);
-	}
-
-#ifndef OPENSSL_NO_DH
-/* This function is aliased to mod_exp (with the dh and mont dropped). */
-static int atalla_mod_exp_dh(const DH *dh, BIGNUM *r,
-		const BIGNUM *a, const BIGNUM *p,
-		const BIGNUM *m, BN_CTX *ctx, BN_MONT_CTX *m_ctx)
-	{
-	return atalla_mod_exp(r, a, p, m, ctx);
-	}
-#endif
-
-/* This stuff is needed if this ENGINE is being compiled into a self-contained
- * shared-library. */
-#ifdef ENGINE_DYNAMIC_SUPPORT
-static int bind_fn(ENGINE *e, const char *id)
-	{
-	if(id && (strcmp(id, engine_atalla_id) != 0))
-		return 0;
-	if(!bind_helper(e))
-		return 0;
-	return 1;
-	}
-IMPLEMENT_DYNAMIC_CHECK_FN()
-IMPLEMENT_DYNAMIC_BIND_FN(bind_fn)
-#endif /* ENGINE_DYNAMIC_SUPPORT */
-
-#endif /* !OPENSSL_NO_HW_ATALLA */
-#endif /* !OPENSSL_NO_HW */
diff --git a/crypto/openssl/crypto/engine/hw_atalla_err.c b/crypto/openssl/crypto/engine/hw_atalla_err.c
deleted file mode 100644
index 1df9c4570c57..000000000000
--- a/crypto/openssl/crypto/engine/hw_atalla_err.c
+++ /dev/null
@@ -1,145 +0,0 @@
-/* hw_atalla_err.c */
-/* ====================================================================
- * Copyright (c) 1999 The OpenSSL Project.  All rights reserved.
- *
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions
- * are met:
- *
- * 1. Redistributions of source code must retain the above copyright
- *    notice, this list of conditions and the following disclaimer. 
- *
- * 2. Redistributions in binary form must reproduce the above copyright
- *    notice, this list of conditions and the following disclaimer in
- *    the documentation and/or other materials provided with the
- *    distribution.
- *
- * 3. All advertising materials mentioning features or use of this
- *    software must display the following acknowledgment:
- *    "This product includes software developed by the OpenSSL Project
- *    for use in the OpenSSL Toolkit. (http://www.OpenSSL.org/)"
- *
- * 4. The names "OpenSSL Toolkit" and "OpenSSL Project" must not be used to
- *    endorse or promote products derived from this software without
- *    prior written permission. For written permission, please contact
- *    openssl-core@OpenSSL.org.
- *
- * 5. Products derived from this software may not be called "OpenSSL"
- *    nor may "OpenSSL" appear in their names without prior written
- *    permission of the OpenSSL Project.
- *
- * 6. Redistributions of any form whatsoever must retain the following
- *    acknowledgment:
- *    "This product includes software developed by the OpenSSL Project
- *    for use in the OpenSSL Toolkit (http://www.OpenSSL.org/)"
- *
- * THIS SOFTWARE IS PROVIDED BY THE OpenSSL PROJECT ``AS IS'' AND ANY
- * EXPRESSED OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
- * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR
- * PURPOSE ARE DISCLAIMED.  IN NO EVENT SHALL THE OpenSSL PROJECT OR
- * ITS CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
- * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
- * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
- * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
- * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
- * STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
- * ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED
- * OF THE POSSIBILITY OF SUCH DAMAGE.
- * ====================================================================
- *
- * This product includes cryptographic software written by Eric Young
- * (eay@cryptsoft.com).  This product includes software written by Tim
- * Hudson (tjh@cryptsoft.com).
- *
- */
-
-/* NOTE: this file was auto generated by the mkerr.pl script: any changes
- * made to it will be overwritten when the script next updates this file,
- * only reason strings will be preserved.
- */
-
-#include <stdio.h>
-#include <openssl/err.h>
-#include "hw_atalla_err.h"
-
-/* BEGIN ERROR CODES */
-#ifndef OPENSSL_NO_ERR
-static ERR_STRING_DATA ATALLA_str_functs[]=
-	{
-{ERR_PACK(0,ATALLA_F_ATALLA_CTRL,0),	"ATALLA_CTRL"},
-{ERR_PACK(0,ATALLA_F_ATALLA_FINISH,0),	"ATALLA_FINISH"},
-{ERR_PACK(0,ATALLA_F_ATALLA_INIT,0),	"ATALLA_INIT"},
-{ERR_PACK(0,ATALLA_F_ATALLA_MOD_EXP,0),	"ATALLA_MOD_EXP"},
-{ERR_PACK(0,ATALLA_F_ATALLA_RSA_MOD_EXP,0),	"ATALLA_RSA_MOD_EXP"},
-{0,NULL}
-	};
-
-static ERR_STRING_DATA ATALLA_str_reasons[]=
-	{
-{ATALLA_R_ALREADY_LOADED                 ,"already loaded"},
-{ATALLA_R_BN_CTX_FULL                    ,"bn ctx full"},
-{ATALLA_R_BN_EXPAND_FAIL                 ,"bn expand fail"},
-{ATALLA_R_CTRL_COMMAND_NOT_IMPLEMENTED   ,"ctrl command not implemented"},
-{ATALLA_R_MISSING_KEY_COMPONENTS         ,"missing key components"},
-{ATALLA_R_NOT_LOADED                     ,"not loaded"},
-{ATALLA_R_REQUEST_FAILED                 ,"request failed"},
-{ATALLA_R_UNIT_FAILURE                   ,"unit failure"},
-{0,NULL}
-	};
-
-#endif
-
-#ifdef ATALLA_LIB_NAME
-static ERR_STRING_DATA ATALLA_lib_name[]=
-        {
-{0	,ATALLA_LIB_NAME},
-{0,NULL}
-	};
-#endif
-
-
-static int ATALLA_lib_error_code=0;
-static int ATALLA_error_init=1;
-
-static void ERR_load_ATALLA_strings(void)
-	{
-	if (ATALLA_lib_error_code == 0)
-		ATALLA_lib_error_code=ERR_get_next_error_library();
-
-	if (ATALLA_error_init)
-		{
-		ATALLA_error_init=0;
-#ifndef OPENSSL_NO_ERR
-		ERR_load_strings(ATALLA_lib_error_code,ATALLA_str_functs);
-		ERR_load_strings(ATALLA_lib_error_code,ATALLA_str_reasons);
-#endif
-
-#ifdef ATALLA_LIB_NAME
-		ATALLA_lib_name->error = ERR_PACK(ATALLA_lib_error_code,0,0);
-		ERR_load_strings(0,ATALLA_lib_name);
-#endif
-		}
-	}
-
-static void ERR_unload_ATALLA_strings(void)
-	{
-	if (ATALLA_error_init == 0)
-		{
-#ifndef OPENSSL_NO_ERR
-		ERR_unload_strings(ATALLA_lib_error_code,ATALLA_str_functs);
-		ERR_unload_strings(ATALLA_lib_error_code,ATALLA_str_reasons);
-#endif
-
-#ifdef ATALLA_LIB_NAME
-		ERR_unload_strings(0,ATALLA_lib_name);
-#endif
-		ATALLA_error_init=1;
-		}
-	}
-
-static void ERR_ATALLA_error(int function, int reason, char *file, int line)
-	{
-	if (ATALLA_lib_error_code == 0)
-		ATALLA_lib_error_code=ERR_get_next_error_library();
-	ERR_PUT_error(ATALLA_lib_error_code,function,reason,file,line);
-	}
diff --git a/crypto/openssl/crypto/engine/hw_atalla_err.h b/crypto/openssl/crypto/engine/hw_atalla_err.h
deleted file mode 100644
index cdac052d8c98..000000000000
--- a/crypto/openssl/crypto/engine/hw_atalla_err.h
+++ /dev/null
@@ -1,89 +0,0 @@
-/* ====================================================================
- * Copyright (c) 2001 The OpenSSL Project.  All rights reserved.
- *
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions
- * are met:
- *
- * 1. Redistributions of source code must retain the above copyright
- *    notice, this list of conditions and the following disclaimer. 
- *
- * 2. Redistributions in binary form must reproduce the above copyright
- *    notice, this list of conditions and the following disclaimer in
- *    the documentation and/or other materials provided with the
- *    distribution.
- *
- * 3. All advertising materials mentioning features or use of this
- *    software must display the following acknowledgment:
- *    "This product includes software developed by the OpenSSL Project
- *    for use in the OpenSSL Toolkit. (http://www.openssl.org/)"
- *
- * 4. The names "OpenSSL Toolkit" and "OpenSSL Project" must not be used to
- *    endorse or promote products derived from this software without
- *    prior written permission. For written permission, please contact
- *    openssl-core@openssl.org.
- *
- * 5. Products derived from this software may not be called "OpenSSL"
- *    nor may "OpenSSL" appear in their names without prior written
- *    permission of the OpenSSL Project.
- *
- * 6. Redistributions of any form whatsoever must retain the following
- *    acknowledgment:
- *    "This product includes software developed by the OpenSSL Project
- *    for use in the OpenSSL Toolkit (http://www.openssl.org/)"
- *
- * THIS SOFTWARE IS PROVIDED BY THE OpenSSL PROJECT ``AS IS'' AND ANY
- * EXPRESSED OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
- * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR
- * PURPOSE ARE DISCLAIMED.  IN NO EVENT SHALL THE OpenSSL PROJECT OR
- * ITS CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
- * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
- * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
- * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
- * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
- * STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
- * ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED
- * OF THE POSSIBILITY OF SUCH DAMAGE.
- * ====================================================================
- *
- * This product includes cryptographic software written by Eric Young
- * (eay@cryptsoft.com).  This product includes software written by Tim
- * Hudson (tjh@cryptsoft.com).
- *
- */
-
-#ifndef HEADER_ATALLA_ERR_H
-#define HEADER_ATALLA_ERR_H
-
-/* BEGIN ERROR CODES */
-/* The following lines are auto generated by the script mkerr.pl. Any changes
- * made after this point may be overwritten when the script is next run.
- */
-static void ERR_load_ATALLA_strings(void);
-static void ERR_unload_ATALLA_strings(void);
-static void ERR_ATALLA_error(int function, int reason, char *file, int line);
-#define ATALLAerr(f,r) ERR_ATALLA_error((f),(r),__FILE__,__LINE__)
-
-/* Error codes for the ATALLA functions. */
-
-/* Function codes. */
-#define ATALLA_F_ATALLA_CTRL				 100
-#define ATALLA_F_ATALLA_FINISH				 101
-#define ATALLA_F_ATALLA_INIT				 102
-#define ATALLA_F_ATALLA_MOD_EXP				 103
-#define ATALLA_F_ATALLA_RSA_MOD_EXP			 104
-
-/* Reason codes. */
-#define ATALLA_R_ALREADY_LOADED				 100
-#define ATALLA_R_BN_CTX_FULL				 101
-#define ATALLA_R_BN_EXPAND_FAIL				 102
-#define ATALLA_R_CTRL_COMMAND_NOT_IMPLEMENTED		 103
-#define ATALLA_R_MISSING_KEY_COMPONENTS			 104
-#define ATALLA_R_NOT_LOADED				 105
-#define ATALLA_R_REQUEST_FAILED				 106
-#define ATALLA_R_UNIT_FAILURE				 107
-
-#ifdef  __cplusplus
-}
-#endif
-#endif
diff --git a/crypto/openssl/crypto/engine/hw_cryptodev.c b/crypto/openssl/crypto/engine/hw_cryptodev.c
deleted file mode 100644
index 3e7fff1c1e1e..000000000000
--- a/crypto/openssl/crypto/engine/hw_cryptodev.c
+++ /dev/null
@@ -1,1135 +0,0 @@
-/*
- * Copyright (c) 2002 Bob Beck <beck@openbsd.org>
- * Copyright (c) 2002 Theo de Raadt
- * Copyright (c) 2002 Markus Friedl
- * All rights reserved.
- *
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions
- * are met:
- * 1. Redistributions of source code must retain the above copyright
- *    notice, this list of conditions and the following disclaimer.
- * 2. Redistributions in binary form must reproduce the above copyright
- *    notice, this list of conditions and the following disclaimer in the
- *    documentation and/or other materials provided with the distribution.
- *
- * THIS SOFTWARE IS PROVIDED BY THE AUTHOR AND CONTRIBUTORS ``AS IS'' AND ANY
- * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
- * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
- * DISCLAIMED.  IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE FOR ANY
- * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
- * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
- * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
- * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
- * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
- * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
- *
- */
-
-#include <openssl/objects.h>
-#include <openssl/engine.h>
-#include <openssl/evp.h>
-
-#if (defined(__unix__) || defined(unix)) && !defined(USG)
-#include <sys/param.h>
-# if (OpenBSD >= 200112) || ((__FreeBSD_version >= 470101 && __FreeBSD_version < 500000) || __FreeBSD_version >= 500041)
-# define HAVE_CRYPTODEV
-# endif
-# if (OpenBSD >= 200110)
-# define HAVE_SYSLOG_R
-# endif
-#endif
-
-#ifndef HAVE_CRYPTODEV
-
-void
-ENGINE_load_cryptodev(void)
-{
-	/* This is a NOP on platforms without /dev/crypto */
-	return;
-}
-
-#else 
-
-#include <sys/types.h>
-#include <crypto/cryptodev.h>
-#include <sys/ioctl.h>
-#include <errno.h>
-#include <stdio.h>
-#include <unistd.h>
-#include <fcntl.h>
-#include <stdarg.h>
-#include <syslog.h>
-#include <errno.h>
-#include <string.h>
-
-struct dev_crypto_state {
-	struct session_op d_sess;
-	int d_fd;
-};
-
-static u_int32_t cryptodev_asymfeat = 0;
-
-static int get_asym_dev_crypto(void);
-static int open_dev_crypto(void);
-static int get_dev_crypto(void);
-static int cryptodev_max_iv(int cipher);
-static int cryptodev_key_length_valid(int cipher, int len);
-static int cipher_nid_to_cryptodev(int nid);
-static int get_cryptodev_ciphers(const int **cnids);
-/*static int get_cryptodev_digests(const int **cnids);*/
-static int cryptodev_usable_ciphers(const int **nids);
-static int cryptodev_usable_digests(const int **nids);
-static int cryptodev_cipher(EVP_CIPHER_CTX *ctx, unsigned char *out,
-    const unsigned char *in, unsigned int inl);
-static int cryptodev_init_key(EVP_CIPHER_CTX *ctx, const unsigned char *key,
-    const unsigned char *iv, int enc);
-static int cryptodev_cleanup(EVP_CIPHER_CTX *ctx);
-static int cryptodev_engine_ciphers(ENGINE *e, const EVP_CIPHER **cipher,
-    const int **nids, int nid);
-static int cryptodev_engine_digests(ENGINE *e, const EVP_MD **digest,
-    const int **nids, int nid);
-static int bn2crparam(const BIGNUM *a, struct crparam *crp);
-static int crparam2bn(struct crparam *crp, BIGNUM *a);
-static void zapparams(struct crypt_kop *kop);
-static int cryptodev_asym(struct crypt_kop *kop, int rlen, BIGNUM *r,
-    int slen, BIGNUM *s);
-
-static int cryptodev_bn_mod_exp(BIGNUM *r, const BIGNUM *a,
-    const BIGNUM *p, const BIGNUM *m, BN_CTX *ctx, BN_MONT_CTX *m_ctx);
-static int cryptodev_rsa_nocrt_mod_exp(BIGNUM *r0, const BIGNUM *I,
-    RSA *rsa);
-static int cryptodev_rsa_mod_exp(BIGNUM *r0, const BIGNUM *I, RSA *rsa);
-static int cryptodev_dsa_bn_mod_exp(DSA *dsa, BIGNUM *r, BIGNUM *a,
-    const BIGNUM *p, const BIGNUM *m, BN_CTX *ctx, BN_MONT_CTX *m_ctx);
-static int cryptodev_dsa_dsa_mod_exp(DSA *dsa, BIGNUM *t1, BIGNUM *g,
-    BIGNUM *u1, BIGNUM *pub_key, BIGNUM *u2, BIGNUM *p,
-    BN_CTX *ctx, BN_MONT_CTX *mont);
-static DSA_SIG *cryptodev_dsa_do_sign(const unsigned char *dgst,
-    int dlen, DSA *dsa);
-static int cryptodev_dsa_verify(const unsigned char *dgst, int dgst_len,
-    DSA_SIG *sig, DSA *dsa);
-static int cryptodev_mod_exp_dh(const DH *dh, BIGNUM *r, const BIGNUM *a,
-    const BIGNUM *p, const BIGNUM *m, BN_CTX *ctx,
-    BN_MONT_CTX *m_ctx);
-static int cryptodev_dh_compute_key(unsigned char *key,
-    const BIGNUM *pub_key, DH *dh);
-static int cryptodev_ctrl(ENGINE *e, int cmd, long i, void *p,
-    void (*f)());
-void ENGINE_load_cryptodev(void);
-
-static const ENGINE_CMD_DEFN cryptodev_defns[] = {
-	{ 0, NULL, NULL, 0 }
-};
-
-static struct {
-	int	id;
-	int	nid;
-	int	ivmax;
-	int	keylen;
-} ciphers[] = {
-	{ CRYPTO_DES_CBC,		NID_des_cbc,		8,	 8, },
-	{ CRYPTO_3DES_CBC,		NID_des_ede3_cbc,	8,	24, },
-	{ CRYPTO_AES_CBC,		NID_aes_128_cbc,	16,	16, },
-	{ CRYPTO_BLF_CBC,		NID_bf_cbc,		8,	16, },
-	{ CRYPTO_CAST_CBC,		NID_cast5_cbc,		8,	16, },
-	{ CRYPTO_SKIPJACK_CBC,		NID_undef,		0,	 0, },
-	{ 0,				NID_undef,		0,	 0, },
-};
-
-#if 0 /* UNUSED */
-static struct {
-	int	id;
-	int	nid;
-} digests[] = {
-	{ CRYPTO_SHA1_HMAC,		NID_hmacWithSHA1,	},
-	{ CRYPTO_RIPEMD160_HMAC,	NID_ripemd160,		},
-	{ CRYPTO_MD5_KPDK,		NID_undef,		},
-	{ CRYPTO_SHA1_KPDK,		NID_undef,		},
-	{ CRYPTO_MD5,			NID_md5,		},
-	{ CRYPTO_SHA1,			NID_undef,		},
-	{ 0,				NID_undef,		},
-};
-#endif
-
-/*
- * Return a fd if /dev/crypto seems usable, 0 otherwise.
- */
-static int
-open_dev_crypto(void)
-{
-	static int fd = -1;
-
-	if (fd == -1) {
-		if ((fd = open("/dev/crypto", O_RDWR, 0)) == -1)
-			return (-1);
-		/* close on exec */
-		if (fcntl(fd, F_SETFD, 1) == -1) {
-			close(fd);
-			fd = -1;
-			return (-1);
-		}
-	}
-	return (fd);
-}
-
-static int
-get_dev_crypto(void)
-{
-	int fd, retfd;
-
-	if ((fd = open_dev_crypto()) == -1)
-		return (-1);
-	if (ioctl(fd, CRIOGET, &retfd) == -1)
-		return (-1);
-
-	/* close on exec */
-	if (fcntl(retfd, F_SETFD, 1) == -1) {
-		close(retfd);
-		return (-1);
-	}
-	return (retfd);
-}
-
-/* Caching version for asym operations */
-static int
-get_asym_dev_crypto(void)
-{
-	static int fd = -1;
-
-	if (fd == -1)
-		fd = get_dev_crypto();
-	return fd;
-}
-
-/*
- * XXXX this needs to be set for each alg - and determined from
- * a running card.
- */
-static int
-cryptodev_max_iv(int cipher)
-{
-	int i;
-
-	for (i = 0; ciphers[i].id; i++)
-		if (ciphers[i].id == cipher)
-			return (ciphers[i].ivmax);
-	return (0);
-}
-
-/*
- * XXXX this needs to be set for each alg - and determined from
- * a running card. For now, fake it out - but most of these
- * for real devices should return 1 for the supported key
- * sizes the device can handle.
- */
-static int
-cryptodev_key_length_valid(int cipher, int len)
-{
-	int i;
-
-	for (i = 0; ciphers[i].id; i++)
-		if (ciphers[i].id == cipher)
-			return (ciphers[i].keylen == len);
-	return (0);
-}
-
-/* convert libcrypto nids to cryptodev */
-static int
-cipher_nid_to_cryptodev(int nid)
-{
-	int i;
-
-	for (i = 0; ciphers[i].id; i++)
-		if (ciphers[i].nid == nid)
-			return (ciphers[i].id);
-	return (0);
-}
-
-/*
- * Find out what ciphers /dev/crypto will let us have a session for.
- * XXX note, that some of these openssl doesn't deal with yet!
- * returning them here is harmless, as long as we return NULL
- * when asked for a handler in the cryptodev_engine_ciphers routine
- */
-static int
-get_cryptodev_ciphers(const int **cnids)
-{
-	static int nids[CRYPTO_ALGORITHM_MAX];
-	struct session_op sess;
-	int fd, i, count = 0;
-
-	if ((fd = get_dev_crypto()) < 0) {
-		*cnids = NULL;
-		return (0);
-	}
-	memset(&sess, 0, sizeof(sess));
-	sess.key = (caddr_t)"123456781234567812345678";
-
-	for (i = 0; ciphers[i].id && count < CRYPTO_ALGORITHM_MAX; i++) {
-		if (ciphers[i].nid == NID_undef)
-			continue;
-		sess.cipher = ciphers[i].id;
-		sess.keylen = ciphers[i].keylen;
-		sess.mac = 0;
-		if (ioctl(fd, CIOCGSESSION, &sess) != -1 &&
-		    ioctl(fd, CIOCFSESSION, &sess.ses) != -1)
-			nids[count++] = ciphers[i].nid;
-	}
-	close(fd);
-
-	if (count > 0)
-		*cnids = nids;
-	else
-		*cnids = NULL;
-	return (count);
-}
-
-/*
- * Find out what digests /dev/crypto will let us have a session for.
- * XXX note, that some of these openssl doesn't deal with yet!
- * returning them here is harmless, as long as we return NULL
- * when asked for a handler in the cryptodev_engine_digests routine
- */
-#if 0 /* UNUSED */
-static int
-get_cryptodev_digests(const int **cnids)
-{
-	static int nids[CRYPTO_ALGORITHM_MAX];
-	struct session_op sess;
-	int fd, i, count = 0;
-
-	if ((fd = get_dev_crypto()) < 0) {
-		*cnids = NULL;
-		return (0);
-	}
-	memset(&sess, 0, sizeof(sess));
-	for (i = 0; digests[i].id && count < CRYPTO_ALGORITHM_MAX; i++) {
-		if (digests[i].nid == NID_undef)
-			continue;
-		sess.mac = digests[i].id;
-		sess.cipher = 0;
-		if (ioctl(fd, CIOCGSESSION, &sess) != -1 &&
-		    ioctl(fd, CIOCFSESSION, &sess.ses) != -1)
-			nids[count++] = digests[i].nid;
-	}
-	close(fd);
-
-	if (count > 0)
-		*cnids = nids;
-	else
-		*cnids = NULL;
-	return (count);
-}
-#endif
-
-/*
- * Find the useable ciphers|digests from dev/crypto - this is the first
- * thing called by the engine init crud which determines what it
- * can use for ciphers from this engine. We want to return
- * only what we can do, anythine else is handled by software.
- *
- * If we can't initialize the device to do anything useful for
- * any reason, we want to return a NULL array, and 0 length,
- * which forces everything to be done is software. By putting
- * the initalization of the device in here, we ensure we can
- * use this engine as the default, and if for whatever reason
- * /dev/crypto won't do what we want it will just be done in
- * software
- *
- * This can (should) be greatly expanded to perhaps take into
- * account speed of the device, and what we want to do.
- * (although the disabling of particular alg's could be controlled
- * by the device driver with sysctl's.) - this is where we
- * want most of the decisions made about what we actually want
- * to use from /dev/crypto.
- */
-static int
-cryptodev_usable_ciphers(const int **nids)
-{
-	return (get_cryptodev_ciphers(nids));
-}
-
-static int
-cryptodev_usable_digests(const int **nids)
-{
-	/*
-	 * XXXX just disable all digests for now, because it sucks.
-	 * we need a better way to decide this - i.e. I may not
-	 * want digests on slow cards like hifn on fast machines,
-	 * but might want them on slow or loaded machines, etc.
-	 * will also want them when using crypto cards that don't
-	 * suck moose gonads - would be nice to be able to decide something
-	 * as reasonable default without having hackery that's card dependent.
-	 * of course, the default should probably be just do everything,
-	 * with perhaps a sysctl to turn algoritms off (or have them off
-	 * by default) on cards that generally suck like the hifn.
-	 */
-	*nids = NULL;
-	return (0);
-}
-
-static int
-cryptodev_cipher(EVP_CIPHER_CTX *ctx, unsigned char *out,
-    const unsigned char *in, unsigned int inl)
-{
-	struct crypt_op cryp;
-	struct dev_crypto_state *state = ctx->cipher_data;
-	struct session_op *sess = &state->d_sess;
-	void *iiv;
-	unsigned char save_iv[EVP_MAX_IV_LENGTH];
-
-	if (state->d_fd < 0)
-		return (0);
-	if (!inl)
-		return (1);
-	if ((inl % ctx->cipher->block_size) != 0)
-		return (0);
-
-	memset(&cryp, 0, sizeof(cryp));
-
-	cryp.ses = sess->ses;
-	cryp.flags = 0;
-	cryp.len = inl;
-	cryp.src = (caddr_t) in;
-	cryp.dst = (caddr_t) out;
-	cryp.mac = 0;
-
-	cryp.op = ctx->encrypt ? COP_ENCRYPT : COP_DECRYPT;
-
-	if (ctx->cipher->iv_len) {
-		cryp.iv = (caddr_t) ctx->iv;
-		if (!ctx->encrypt) {
-			iiv = (void *) in + inl - ctx->cipher->iv_len;
-			memcpy(save_iv, iiv, ctx->cipher->iv_len);
-		}
-	} else
-		cryp.iv = NULL;
-
-	if (ioctl(state->d_fd, CIOCCRYPT, &cryp) == -1) {
-		/* XXX need better errror handling
-		 * this can fail for a number of different reasons.
-		 */
-		return (0);
-	}
-
-	if (ctx->cipher->iv_len) {
-		if (ctx->encrypt)
-			iiv = (void *) out + inl - ctx->cipher->iv_len;
-		else
-			iiv = save_iv;
-		memcpy(ctx->iv, iiv, ctx->cipher->iv_len);
-	}
-	return (1);
-}
-
-static int
-cryptodev_init_key(EVP_CIPHER_CTX *ctx, const unsigned char *key,
-    const unsigned char *iv, int enc)
-{
-	struct dev_crypto_state *state = ctx->cipher_data;
-	struct session_op *sess = &state->d_sess;
-	int cipher;
-
-	if ((cipher = cipher_nid_to_cryptodev(ctx->cipher->nid)) == NID_undef)
-		return (0);
-
-	if (ctx->cipher->iv_len > cryptodev_max_iv(cipher))
-		return (0);
-
-	if (!cryptodev_key_length_valid(cipher, ctx->key_len))
-		return (0);
-
-	memset(sess, 0, sizeof(struct session_op));
-
-	if ((state->d_fd = get_dev_crypto()) < 0)
-		return (0);
-
-	sess->key = (unsigned char *)key;
-	sess->keylen = ctx->key_len;
-	sess->cipher = cipher;
-
-	if (ioctl(state->d_fd, CIOCGSESSION, sess) == -1) {
-		close(state->d_fd);
-		state->d_fd = -1;
-		return (0);
-	}
-	return (1);
-}
-
-/*
- * free anything we allocated earlier when initting a
- * session, and close the session.
- */
-static int
-cryptodev_cleanup(EVP_CIPHER_CTX *ctx)
-{
-	int ret = 0;
-	struct dev_crypto_state *state = ctx->cipher_data;
-	struct session_op *sess = &state->d_sess;
-
-	if (state->d_fd < 0)
-		return (0);
-
-	/* XXX if this ioctl fails, someting's wrong. the invoker
-	 * may have called us with a bogus ctx, or we could
-	 * have a device that for whatever reason just doesn't
-	 * want to play ball - it's not clear what's right
-	 * here - should this be an error? should it just
-	 * increase a counter, hmm. For right now, we return
-	 * 0 - I don't believe that to be "right". we could
-	 * call the gorpy openssl lib error handlers that
-	 * print messages to users of the library. hmm..
-	 */
-
-	if (ioctl(state->d_fd, CIOCFSESSION, &sess->ses) == -1) {
-		ret = 0;
-	} else {
-		ret = 1;
-	}
-	close(state->d_fd);
-	state->d_fd = -1;
-
-	return (ret);
-}
-
-/*
- * libcrypto EVP stuff - this is how we get wired to EVP so the engine
- * gets called when libcrypto requests a cipher NID.
- */
-
-/* DES CBC EVP */
-const EVP_CIPHER cryptodev_des_cbc = {
-	NID_des_cbc,
-	8, 8, 8,
-	EVP_CIPH_CBC_MODE,
-	cryptodev_init_key,
-	cryptodev_cipher,
-	cryptodev_cleanup,
-	sizeof(struct dev_crypto_state),
-	EVP_CIPHER_set_asn1_iv,
-	EVP_CIPHER_get_asn1_iv,
-	NULL
-};
-
-/* 3DES CBC EVP */
-const EVP_CIPHER cryptodev_3des_cbc = {
-	NID_des_ede3_cbc,
-	8, 24, 8,
-	EVP_CIPH_CBC_MODE,
-	cryptodev_init_key,
-	cryptodev_cipher,
-	cryptodev_cleanup,
-	sizeof(struct dev_crypto_state),
-	EVP_CIPHER_set_asn1_iv,
-	EVP_CIPHER_get_asn1_iv,
-	NULL
-};
-
-const EVP_CIPHER cryptodev_bf_cbc = {
-	NID_bf_cbc,
-	8, 16, 8,
-	EVP_CIPH_CBC_MODE,
-	cryptodev_init_key,
-	cryptodev_cipher,
-	cryptodev_cleanup,
-	sizeof(struct dev_crypto_state),
-	EVP_CIPHER_set_asn1_iv,
-	EVP_CIPHER_get_asn1_iv,
-	NULL
-};
-
-const EVP_CIPHER cryptodev_cast_cbc = {
-	NID_cast5_cbc,
-	8, 16, 8,
-	EVP_CIPH_CBC_MODE,
-	cryptodev_init_key,
-	cryptodev_cipher,
-	cryptodev_cleanup,
-	sizeof(struct dev_crypto_state),
-	EVP_CIPHER_set_asn1_iv,
-	EVP_CIPHER_get_asn1_iv,
-	NULL
-};
-
-const EVP_CIPHER cryptodev_aes_cbc = {
-	NID_aes_128_cbc,
-	16, 16, 16,
-	EVP_CIPH_CBC_MODE,
-	cryptodev_init_key,
-	cryptodev_cipher,
-	cryptodev_cleanup,
-	sizeof(struct dev_crypto_state),
-	EVP_CIPHER_set_asn1_iv,
-	EVP_CIPHER_get_asn1_iv,
-	NULL
-};
-
-/*
- * Registered by the ENGINE when used to find out how to deal with
- * a particular NID in the ENGINE. this says what we'll do at the
- * top level - note, that list is restricted by what we answer with
- */
-static int
-cryptodev_engine_ciphers(ENGINE *e, const EVP_CIPHER **cipher,
-    const int **nids, int nid)
-{
-	if (!cipher)
-		return (cryptodev_usable_ciphers(nids));
-
-	switch (nid) {
-	case NID_des_ede3_cbc:
-		*cipher = &cryptodev_3des_cbc;
-		break;
-	case NID_des_cbc:
-		*cipher = &cryptodev_des_cbc;
-		break;
-	case NID_bf_cbc:
-		*cipher = &cryptodev_bf_cbc;
-		break;
-	case NID_cast5_cbc:
-		*cipher = &cryptodev_cast_cbc;
-		break;
-	case NID_aes_128_cbc:
-		*cipher = &cryptodev_aes_cbc;
-		break;
-	default:
-		*cipher = NULL;
-		break;
-	}
-	return (*cipher != NULL);
-}
-
-static int
-cryptodev_engine_digests(ENGINE *e, const EVP_MD **digest,
-    const int **nids, int nid)
-{
-	if (!digest)
-		return (cryptodev_usable_digests(nids));
-
-	switch (nid) {
-	case NID_md5:
-		*digest = NULL; /* need to make a clean md5 critter */
-		break;
-	default:
-		*digest = NULL;
-		break;
-	}
-	return (*digest != NULL);
-}
-
-/*
- * Convert a BIGNUM to the representation that /dev/crypto needs.
- * Upon completion of use, the caller is responsible for freeing
- * crp->crp_p.
- */
-static int
-bn2crparam(const BIGNUM *a, struct crparam *crp)
-{
-	int i, j, k;
-	ssize_t bytes, bits;
-	u_char *b;
-
-	crp->crp_p = NULL;
-	crp->crp_nbits = 0;
-
-	bits = BN_num_bits(a);
-	bytes = (bits + 7) / 8;
-
-	b = malloc(bytes);
-	if (b == NULL)
-		return (1);
-
-	crp->crp_p = b;
-	crp->crp_nbits = bits;
-
-	for (i = 0, j = 0; i < a->top; i++) {
-		for (k = 0; k < BN_BITS2 / 8; k++) {
-			if ((j + k) >= bytes)
-				return (0);
-			b[j + k] = a->d[i] >> (k * 8);
-		}
-		j += BN_BITS2 / 8;
-	}
-	return (0);
-}
-
-/* Convert a /dev/crypto parameter to a BIGNUM */
-static int
-crparam2bn(struct crparam *crp, BIGNUM *a)
-{
-	u_int8_t *pd;
-	int i, bytes;
-
-	bytes = (crp->crp_nbits + 7) / 8;
-
-	if (bytes == 0)
-		return (-1);
-
-	if ((pd = (u_int8_t *) malloc(bytes)) == NULL)
-		return (-1);
-
-	for (i = 0; i < bytes; i++)
-		pd[i] = crp->crp_p[bytes - i - 1];
-
-	BN_bin2bn(pd, bytes, a);
-	free(pd);
-
-	return (0);
-}
-
-static void
-zapparams(struct crypt_kop *kop)
-{
-	int i;
-
-	for (i = 0; i <= kop->crk_iparams + kop->crk_oparams; i++) {
-		if (kop->crk_param[i].crp_p)
-			free(kop->crk_param[i].crp_p);
-		kop->crk_param[i].crp_p = NULL;
-		kop->crk_param[i].crp_nbits = 0;
-	}
-}
-
-static int
-cryptodev_asym(struct crypt_kop *kop, int rlen, BIGNUM *r, int slen, BIGNUM *s)
-{
-	int fd, ret = -1;
-
-	if ((fd = get_asym_dev_crypto()) < 0)
-		return (ret);
-
-	if (r) {
-		kop->crk_param[kop->crk_iparams].crp_p = calloc(rlen, sizeof(char));
-		kop->crk_param[kop->crk_iparams].crp_nbits = rlen * 8;
-		kop->crk_oparams++;
-	}
-	if (s) {
-		kop->crk_param[kop->crk_iparams+1].crp_p = calloc(slen, sizeof(char));
-		kop->crk_param[kop->crk_iparams+1].crp_nbits = slen * 8;
-		kop->crk_oparams++;
-	}
-
-	if (ioctl(fd, CIOCKEY, kop) == 0) {
-		if (r)
-			crparam2bn(&kop->crk_param[kop->crk_iparams], r);
-		if (s)
-			crparam2bn(&kop->crk_param[kop->crk_iparams+1], s);
-		ret = 0;
-	}
-
-	return (ret);
-}
-
-static int
-cryptodev_bn_mod_exp(BIGNUM *r, const BIGNUM *a, const BIGNUM *p,
-    const BIGNUM *m, BN_CTX *ctx, BN_MONT_CTX *in_mont)
-{
-	struct crypt_kop kop;
-	int ret = 1;
-
-	/* Currently, we know we can do mod exp iff we can do any
-	 * asymmetric operations at all.
-	 */
-	if (cryptodev_asymfeat == 0) {
-		ret = BN_mod_exp(r, a, p, m, ctx);
-		return (ret);
-	}
-
-	memset(&kop, 0, sizeof kop);
-	kop.crk_op = CRK_MOD_EXP;
-
-	/* inputs: a^p % m */
-	if (bn2crparam(a, &kop.crk_param[0]))
-		goto err;
-	if (bn2crparam(p, &kop.crk_param[1]))
-		goto err;
-	if (bn2crparam(m, &kop.crk_param[2]))
-		goto err;
-	kop.crk_iparams = 3;
-
-	if (cryptodev_asym(&kop, BN_num_bytes(m), r, 0, NULL) == -1) {
-		const RSA_METHOD *meth = RSA_PKCS1_SSLeay();
-		ret = meth->bn_mod_exp(r, a, p, m, ctx, in_mont);
-	}
-err:
-	zapparams(&kop);
-	return (ret);
-}
-
-static int
-cryptodev_rsa_nocrt_mod_exp(BIGNUM *r0, const BIGNUM *I, RSA *rsa)
-{
-	int r;
-	BN_CTX *ctx;
-
-	ctx = BN_CTX_new();
-	r = cryptodev_bn_mod_exp(r0, I, rsa->d, rsa->n, ctx, NULL);
-	BN_CTX_free(ctx);
-	return (r);
-}
-
-static int
-cryptodev_rsa_mod_exp(BIGNUM *r0, const BIGNUM *I, RSA *rsa)
-{
-	struct crypt_kop kop;
-	int ret = 1;
-
-	if (!rsa->p || !rsa->q || !rsa->dmp1 || !rsa->dmq1 || !rsa->iqmp) {
-		/* XXX 0 means failure?? */
-		return (0);
-	}
-
-	memset(&kop, 0, sizeof kop);
-	kop.crk_op = CRK_MOD_EXP_CRT;
-	/* inputs: rsa->p rsa->q I rsa->dmp1 rsa->dmq1 rsa->iqmp */
-	if (bn2crparam(rsa->p, &kop.crk_param[0]))
-		goto err;
-	if (bn2crparam(rsa->q, &kop.crk_param[1]))
-		goto err;
-	if (bn2crparam(I, &kop.crk_param[2]))
-		goto err;
-	if (bn2crparam(rsa->dmp1, &kop.crk_param[3]))
-		goto err;
-	if (bn2crparam(rsa->dmq1, &kop.crk_param[4]))
-		goto err;
-	if (bn2crparam(rsa->iqmp, &kop.crk_param[5]))
-		goto err;
-	kop.crk_iparams = 6;
-
-	if (cryptodev_asym(&kop, BN_num_bytes(rsa->n), r0, 0, NULL) == -1) {
-		const RSA_METHOD *meth = RSA_PKCS1_SSLeay();
-		ret = (*meth->rsa_mod_exp)(r0, I, rsa);
-	}
-err:
-	zapparams(&kop);
-	return (ret);
-}
-
-static RSA_METHOD cryptodev_rsa = {
-	"cryptodev RSA method",
-	NULL,				/* rsa_pub_enc */
-	NULL,				/* rsa_pub_dec */
-	NULL,				/* rsa_priv_enc */
-	NULL,				/* rsa_priv_dec */
-	NULL,
-	NULL,
-	NULL,				/* init */
-	NULL,				/* finish */
-	0,				/* flags */
-	NULL,				/* app_data */
-	NULL,				/* rsa_sign */
-	NULL				/* rsa_verify */
-};
-
-static int
-cryptodev_dsa_bn_mod_exp(DSA *dsa, BIGNUM *r, BIGNUM *a, const BIGNUM *p,
-    const BIGNUM *m, BN_CTX *ctx, BN_MONT_CTX *m_ctx)
-{
-	return (cryptodev_bn_mod_exp(r, a, p, m, ctx, m_ctx));
-}
-
-static int
-cryptodev_dsa_dsa_mod_exp(DSA *dsa, BIGNUM *t1, BIGNUM *g,
-    BIGNUM *u1, BIGNUM *pub_key, BIGNUM *u2, BIGNUM *p,
-    BN_CTX *ctx, BN_MONT_CTX *mont)
-{
-	BIGNUM t2;
-	int ret = 0;
-
-	BN_init(&t2);
-
-	/* v = ( g^u1 * y^u2 mod p ) mod q */
-	/* let t1 = g ^ u1 mod p */
-	ret = 0;
-
-	if (!dsa->meth->bn_mod_exp(dsa,t1,dsa->g,u1,dsa->p,ctx,mont))
-		goto err;
-
-	/* let t2 = y ^ u2 mod p */
-	if (!dsa->meth->bn_mod_exp(dsa,&t2,dsa->pub_key,u2,dsa->p,ctx,mont))
-		goto err;
-	/* let u1 = t1 * t2 mod p */
-	if (!BN_mod_mul(u1,t1,&t2,dsa->p,ctx))
-		goto err;
-
-	BN_copy(t1,u1);
-
-	ret = 1;
-err:
-	BN_free(&t2);
-	return(ret);
-}
-
-static DSA_SIG *
-cryptodev_dsa_do_sign(const unsigned char *dgst, int dlen, DSA *dsa)
-{
-	struct crypt_kop kop;
-	BIGNUM *r = NULL, *s = NULL;
-	DSA_SIG *dsaret = NULL;
-
-	if ((r = BN_new()) == NULL)
-		goto err;
-	if ((s = BN_new()) == NULL) {
-		BN_free(r);
-		goto err;
-	}
-
-	memset(&kop, 0, sizeof kop);
-	kop.crk_op = CRK_DSA_SIGN;
-
-	/* inputs: dgst dsa->p dsa->q dsa->g dsa->priv_key */
-	kop.crk_param[0].crp_p = (caddr_t)dgst;
-	kop.crk_param[0].crp_nbits = dlen * 8;
-	if (bn2crparam(dsa->p, &kop.crk_param[1]))
-		goto err;
-	if (bn2crparam(dsa->q, &kop.crk_param[2]))
-		goto err;
-	if (bn2crparam(dsa->g, &kop.crk_param[3]))
-		goto err;
-	if (bn2crparam(dsa->priv_key, &kop.crk_param[4]))
-		goto err;
-	kop.crk_iparams = 5;
-
-	if (cryptodev_asym(&kop, BN_num_bytes(dsa->q), r,
-	    BN_num_bytes(dsa->q), s) == 0) {
-		dsaret = DSA_SIG_new();
-		dsaret->r = r;
-		dsaret->s = s;
-	} else {
-		const DSA_METHOD *meth = DSA_OpenSSL();
-		BN_free(r);
-		BN_free(s);
-		dsaret = (meth->dsa_do_sign)(dgst, dlen, dsa);
-	}
-err:
-	kop.crk_param[0].crp_p = NULL;
-	zapparams(&kop);
-	return (dsaret);
-}
-
-static int
-cryptodev_dsa_verify(const unsigned char *dgst, int dlen,
-    DSA_SIG *sig, DSA *dsa)
-{
-	struct crypt_kop kop;
-	int dsaret = 1;
-
-	memset(&kop, 0, sizeof kop);
-	kop.crk_op = CRK_DSA_VERIFY;
-
-	/* inputs: dgst dsa->p dsa->q dsa->g dsa->pub_key sig->r sig->s */
-	kop.crk_param[0].crp_p = (caddr_t)dgst;
-	kop.crk_param[0].crp_nbits = dlen * 8;
-	if (bn2crparam(dsa->p, &kop.crk_param[1]))
-		goto err;
-	if (bn2crparam(dsa->q, &kop.crk_param[2]))
-		goto err;
-	if (bn2crparam(dsa->g, &kop.crk_param[3]))
-		goto err;
-	if (bn2crparam(dsa->pub_key, &kop.crk_param[4]))
-		goto err;
-	if (bn2crparam(sig->r, &kop.crk_param[5]))
-		goto err;
-	if (bn2crparam(sig->s, &kop.crk_param[6]))
-		goto err;
-	kop.crk_iparams = 7;
-
-	if (cryptodev_asym(&kop, 0, NULL, 0, NULL) == 0) {
-		dsaret = kop.crk_status;
-	} else {
-		const DSA_METHOD *meth = DSA_OpenSSL();
-
-		dsaret = (meth->dsa_do_verify)(dgst, dlen, sig, dsa);
-	}
-err:
-	kop.crk_param[0].crp_p = NULL;
-	zapparams(&kop);
-	return (dsaret);
-}
-
-static DSA_METHOD cryptodev_dsa = {
-	"cryptodev DSA method",
-	NULL,
-	NULL,				/* dsa_sign_setup */
-	NULL,
-	NULL,				/* dsa_mod_exp */
-	NULL,
-	NULL,				/* init */
-	NULL,				/* finish */
-	0,	/* flags */
-	NULL	/* app_data */
-};
-
-static int
-cryptodev_mod_exp_dh(const DH *dh, BIGNUM *r, const BIGNUM *a,
-    const BIGNUM *p, const BIGNUM *m, BN_CTX *ctx,
-    BN_MONT_CTX *m_ctx)
-{
-	return (cryptodev_bn_mod_exp(r, a, p, m, ctx, m_ctx));
-}
-
-static int
-cryptodev_dh_compute_key(unsigned char *key, const BIGNUM *pub_key, DH *dh)
-{
-	struct crypt_kop kop;
-	int dhret = 1;
-	int fd, keylen;
-
-	if ((fd = get_asym_dev_crypto()) < 0) {
-		const DH_METHOD *meth = DH_OpenSSL();
-
-		return ((meth->compute_key)(key, pub_key, dh));
-	}
-
-	keylen = BN_num_bits(dh->p);
-
-	memset(&kop, 0, sizeof kop);
-	kop.crk_op = CRK_DH_COMPUTE_KEY;
-
-	/* inputs: dh->priv_key pub_key dh->p key */
-	if (bn2crparam(dh->priv_key, &kop.crk_param[0]))
-		goto err;
-	if (bn2crparam(pub_key, &kop.crk_param[1]))
-		goto err;
-	if (bn2crparam(dh->p, &kop.crk_param[2]))
-		goto err;
-	kop.crk_iparams = 3;
-
-	kop.crk_param[3].crp_p = key;
-	kop.crk_param[3].crp_nbits = keylen * 8;
-	kop.crk_oparams = 1;
-
-	if (ioctl(fd, CIOCKEY, &kop) == -1) {
-		const DH_METHOD *meth = DH_OpenSSL();
-
-		dhret = (meth->compute_key)(key, pub_key, dh);
-	}
-err:
-	kop.crk_param[3].crp_p = NULL;
-	zapparams(&kop);
-	return (dhret);
-}
-
-static DH_METHOD cryptodev_dh = {
-	"cryptodev DH method",
-	NULL,				/* cryptodev_dh_generate_key */
-	NULL,
-	NULL,
-	NULL,
-	NULL,
-	0,	/* flags */
-	NULL	/* app_data */
-};
-
-/*
- * ctrl right now is just a wrapper that doesn't do much
- * but I expect we'll want some options soon.
- */
-static int
-cryptodev_ctrl(ENGINE *e, int cmd, long i, void *p, void (*f)())
-{
-#ifdef HAVE_SYSLOG_R
-	struct syslog_data sd = SYSLOG_DATA_INIT;
-#endif
-
-	switch (cmd) {
-	default:
-#ifdef HAVE_SYSLOG_R
-		syslog_r(LOG_ERR, &sd,
-		    "cryptodev_ctrl: unknown command %d", cmd);
-#else
-		syslog(LOG_ERR, "cryptodev_ctrl: unknown command %d", cmd);
-#endif
-		break;
-	}
-	return (1);
-}
-
-void
-ENGINE_load_cryptodev(void)
-{
-	ENGINE *engine = ENGINE_new();
-	int fd;
-
-	if (engine == NULL)
-		return;
-	if ((fd = get_dev_crypto()) < 0) {
-		ENGINE_free(engine);
-		return;
-	}
-
-	/*
-	 * find out what asymmetric crypto algorithms we support
-	 */
-	if (ioctl(fd, CIOCASYMFEAT, &cryptodev_asymfeat) == -1) {
-		close(fd);
-		ENGINE_free(engine);
-		return;
-	}
-	close(fd);
-
-	if (!ENGINE_set_id(engine, "cryptodev") ||
-	    !ENGINE_set_name(engine, "BSD cryptodev engine") ||
-	    !ENGINE_set_ciphers(engine, cryptodev_engine_ciphers) ||
-	    !ENGINE_set_digests(engine, cryptodev_engine_digests) ||
-	    !ENGINE_set_ctrl_function(engine, cryptodev_ctrl) ||
-	    !ENGINE_set_cmd_defns(engine, cryptodev_defns)) {
-		ENGINE_free(engine);
-		return;
-	}
-
-	if (ENGINE_set_RSA(engine, &cryptodev_rsa)) {
-		const RSA_METHOD *rsa_meth = RSA_PKCS1_SSLeay();
-
-		cryptodev_rsa.bn_mod_exp = rsa_meth->bn_mod_exp;
-		cryptodev_rsa.rsa_mod_exp = rsa_meth->rsa_mod_exp;
-		cryptodev_rsa.rsa_pub_enc = rsa_meth->rsa_pub_enc;
-		cryptodev_rsa.rsa_pub_dec = rsa_meth->rsa_pub_dec;
-		cryptodev_rsa.rsa_priv_enc = rsa_meth->rsa_priv_enc;
-		cryptodev_rsa.rsa_priv_dec = rsa_meth->rsa_priv_dec;
-		if (cryptodev_asymfeat & CRF_MOD_EXP) {
-			cryptodev_rsa.bn_mod_exp = cryptodev_bn_mod_exp;
-			if (cryptodev_asymfeat & CRF_MOD_EXP_CRT)
-				cryptodev_rsa.rsa_mod_exp =
-				    cryptodev_rsa_mod_exp;
-			else
-				cryptodev_rsa.rsa_mod_exp =
-				    cryptodev_rsa_nocrt_mod_exp;
-		}
-	}
-
-	if (ENGINE_set_DSA(engine, &cryptodev_dsa)) {
-		const DSA_METHOD *meth = DSA_OpenSSL();
-
-		memcpy(&cryptodev_dsa, meth, sizeof(DSA_METHOD));
-		if (cryptodev_asymfeat & CRF_DSA_SIGN)
-			cryptodev_dsa.dsa_do_sign = cryptodev_dsa_do_sign;
-		if (cryptodev_asymfeat & CRF_MOD_EXP) {
-			cryptodev_dsa.bn_mod_exp = cryptodev_dsa_bn_mod_exp;
-			cryptodev_dsa.dsa_mod_exp = cryptodev_dsa_dsa_mod_exp;
-		}
-		if (cryptodev_asymfeat & CRF_DSA_VERIFY)
-			cryptodev_dsa.dsa_do_verify = cryptodev_dsa_verify;
-	}
-
-	if (ENGINE_set_DH(engine, &cryptodev_dh)){
-		const DH_METHOD *dh_meth = DH_OpenSSL();
-
-		cryptodev_dh.generate_key = dh_meth->generate_key;
-		cryptodev_dh.compute_key = dh_meth->compute_key;
-		cryptodev_dh.bn_mod_exp = dh_meth->bn_mod_exp;
-		if (cryptodev_asymfeat & CRF_MOD_EXP) {
-			cryptodev_dh.bn_mod_exp = cryptodev_mod_exp_dh;
-			if (cryptodev_asymfeat & CRF_DH_COMPUTE_KEY)
-				cryptodev_dh.compute_key =
-				    cryptodev_dh_compute_key;
-		}
-	}
-
-	ENGINE_add(engine);
-	ENGINE_free(engine);
-	ERR_clear_error();
-}
-
-#endif /* HAVE_CRYPTODEV */
diff --git a/crypto/openssl/crypto/engine/hw_cswift.c b/crypto/openssl/crypto/engine/hw_cswift.c
deleted file mode 100644
index f128ee5a68d9..000000000000
--- a/crypto/openssl/crypto/engine/hw_cswift.c
+++ /dev/null
@@ -1,997 +0,0 @@
-/* crypto/engine/hw_cswift.c */
-/* Written by Geoff Thorpe (geoff@geoffthorpe.net) for the OpenSSL
- * project 2000.
- */
-/* ====================================================================
- * Copyright (c) 1999-2001 The OpenSSL Project.  All rights reserved.
- *
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions
- * are met:
- *
- * 1. Redistributions of source code must retain the above copyright
- *    notice, this list of conditions and the following disclaimer. 
- *
- * 2. Redistributions in binary form must reproduce the above copyright
- *    notice, this list of conditions and the following disclaimer in
- *    the documentation and/or other materials provided with the
- *    distribution.
- *
- * 3. All advertising materials mentioning features or use of this
- *    software must display the following acknowledgment:
- *    "This product includes software developed by the OpenSSL Project
- *    for use in the OpenSSL Toolkit. (http://www.OpenSSL.org/)"
- *
- * 4. The names "OpenSSL Toolkit" and "OpenSSL Project" must not be used to
- *    endorse or promote products derived from this software without
- *    prior written permission. For written permission, please contact
- *    licensing@OpenSSL.org.
- *
- * 5. Products derived from this software may not be called "OpenSSL"
- *    nor may "OpenSSL" appear in their names without prior written
- *    permission of the OpenSSL Project.
- *
- * 6. Redistributions of any form whatsoever must retain the following
- *    acknowledgment:
- *    "This product includes software developed by the OpenSSL Project
- *    for use in the OpenSSL Toolkit (http://www.OpenSSL.org/)"
- *
- * THIS SOFTWARE IS PROVIDED BY THE OpenSSL PROJECT ``AS IS'' AND ANY
- * EXPRESSED OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
- * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR
- * PURPOSE ARE DISCLAIMED.  IN NO EVENT SHALL THE OpenSSL PROJECT OR
- * ITS CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
- * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
- * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
- * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
- * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
- * STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
- * ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED
- * OF THE POSSIBILITY OF SUCH DAMAGE.
- * ====================================================================
- *
- * This product includes cryptographic software written by Eric Young
- * (eay@cryptsoft.com).  This product includes software written by Tim
- * Hudson (tjh@cryptsoft.com).
- *
- */
-
-#include <stdio.h>
-#include <openssl/crypto.h>
-#include "cryptlib.h"
-#include <openssl/dso.h>
-#include <openssl/engine.h>
-
-#ifndef OPENSSL_NO_HW
-#ifndef OPENSSL_NO_HW_CSWIFT
-
-/* Attribution notice: Rainbow have generously allowed me to reproduce
- * the necessary definitions here from their API. This means the support
- * can build independently of whether application builders have the
- * API or hardware. This will allow developers to easily produce software
- * that has latent hardware support for any users that have accelerators
- * installed, without the developers themselves needing anything extra.
- *
- * I have only clipped the parts from the CryptoSwift header files that
- * are (or seem) relevant to the CryptoSwift support code. This is
- * simply to keep the file sizes reasonable.
- * [Geoff]
- */
-#ifdef FLAT_INC
-#include "cswift.h"
-#else
-#include "vendor_defns/cswift.h"
-#endif
-
-#define CSWIFT_LIB_NAME "cswift engine"
-#include "hw_cswift_err.c"
-
-static int cswift_destroy(ENGINE *e);
-static int cswift_init(ENGINE *e);
-static int cswift_finish(ENGINE *e);
-static int cswift_ctrl(ENGINE *e, int cmd, long i, void *p, void (*f)());
-
-/* BIGNUM stuff */
-static int cswift_mod_exp(BIGNUM *r, const BIGNUM *a, const BIGNUM *p,
-		const BIGNUM *m, BN_CTX *ctx);
-static int cswift_mod_exp_crt(BIGNUM *r, const BIGNUM *a, const BIGNUM *p,
-		const BIGNUM *q, const BIGNUM *dmp1, const BIGNUM *dmq1,
-		const BIGNUM *iqmp, BN_CTX *ctx);
-
-#ifndef OPENSSL_NO_RSA
-/* RSA stuff */
-static int cswift_rsa_mod_exp(BIGNUM *r0, const BIGNUM *I, RSA *rsa);
-#endif
-/* This function is aliased to mod_exp (with the mont stuff dropped). */
-static int cswift_mod_exp_mont(BIGNUM *r, const BIGNUM *a, const BIGNUM *p,
-		const BIGNUM *m, BN_CTX *ctx, BN_MONT_CTX *m_ctx);
-
-#ifndef OPENSSL_NO_DSA
-/* DSA stuff */
-static DSA_SIG *cswift_dsa_sign(const unsigned char *dgst, int dlen, DSA *dsa);
-static int cswift_dsa_verify(const unsigned char *dgst, int dgst_len,
-				DSA_SIG *sig, DSA *dsa);
-#endif
-
-#ifndef OPENSSL_NO_DH
-/* DH stuff */
-/* This function is alised to mod_exp (with the DH and mont dropped). */
-static int cswift_mod_exp_dh(const DH *dh, BIGNUM *r,
-		const BIGNUM *a, const BIGNUM *p,
-		const BIGNUM *m, BN_CTX *ctx, BN_MONT_CTX *m_ctx);
-#endif
-
-/* RAND stuff */
-static int cswift_rand_bytes(unsigned char *buf, int num);
-static int cswift_rand_status(void);
-
-/* The definitions for control commands specific to this engine */
-#define CSWIFT_CMD_SO_PATH		ENGINE_CMD_BASE
-static const ENGINE_CMD_DEFN cswift_cmd_defns[] = {
-	{CSWIFT_CMD_SO_PATH,
-		"SO_PATH",
-		"Specifies the path to the 'cswift' shared library",
-		ENGINE_CMD_FLAG_STRING},
-	{0, NULL, NULL, 0}
-	};
-
-#ifndef OPENSSL_NO_RSA
-/* Our internal RSA_METHOD that we provide pointers to */
-static RSA_METHOD cswift_rsa =
-	{
-	"CryptoSwift RSA method",
-	NULL,
-	NULL,
-	NULL,
-	NULL,
-	cswift_rsa_mod_exp,
-	cswift_mod_exp_mont,
-	NULL,
-	NULL,
-	0,
-	NULL,
-	NULL,
-	NULL
-	};
-#endif
-
-#ifndef OPENSSL_NO_DSA
-/* Our internal DSA_METHOD that we provide pointers to */
-static DSA_METHOD cswift_dsa =
-	{
-	"CryptoSwift DSA method",
-	cswift_dsa_sign,
-	NULL, /* dsa_sign_setup */
-	cswift_dsa_verify,
-	NULL, /* dsa_mod_exp */
-	NULL, /* bn_mod_exp */
-	NULL, /* init */
-	NULL, /* finish */
-	0, /* flags */
-	NULL /* app_data */
-	};
-#endif
-
-#ifndef OPENSSL_NO_DH
-/* Our internal DH_METHOD that we provide pointers to */
-static DH_METHOD cswift_dh =
-	{
-	"CryptoSwift DH method",
-	NULL,
-	NULL,
-	cswift_mod_exp_dh,
-	NULL,
-	NULL,
-	0,
-	NULL
-	};
-#endif
-
-static RAND_METHOD cswift_random =
-    {
-    /* "CryptoSwift RAND method", */
-    NULL,
-    cswift_rand_bytes,
-    NULL,
-    NULL,
-    cswift_rand_bytes,
-    cswift_rand_status,
-    };
-
-
-/* Constants used when creating the ENGINE */
-static const char *engine_cswift_id = "cswift";
-static const char *engine_cswift_name = "CryptoSwift hardware engine support";
-
-/* This internal function is used by ENGINE_cswift() and possibly by the
- * "dynamic" ENGINE support too */
-static int bind_helper(ENGINE *e)
-	{
-#ifndef OPENSSL_NO_RSA
-	const RSA_METHOD *meth1;
-#endif
-#ifndef OPENSSL_NO_DH
-	const DH_METHOD *meth2;
-#endif
-	if(!ENGINE_set_id(e, engine_cswift_id) ||
-			!ENGINE_set_name(e, engine_cswift_name) ||
-#ifndef OPENSSL_NO_RSA
-			!ENGINE_set_RSA(e, &cswift_rsa) ||
-#endif
-#ifndef OPENSSL_NO_DSA
-			!ENGINE_set_DSA(e, &cswift_dsa) ||
-#endif
-#ifndef OPENSSL_NO_DH
-			!ENGINE_set_DH(e, &cswift_dh) ||
-#endif
-			!ENGINE_set_RAND(e, &cswift_random) ||
-			!ENGINE_set_destroy_function(e, cswift_destroy) ||
-			!ENGINE_set_init_function(e, cswift_init) ||
-			!ENGINE_set_finish_function(e, cswift_finish) ||
-			!ENGINE_set_ctrl_function(e, cswift_ctrl) ||
-			!ENGINE_set_cmd_defns(e, cswift_cmd_defns))
-		return 0;
-
-#ifndef OPENSSL_NO_RSA
-	/* We know that the "PKCS1_SSLeay()" functions hook properly
-	 * to the cswift-specific mod_exp and mod_exp_crt so we use
-	 * those functions. NB: We don't use ENGINE_openssl() or
-	 * anything "more generic" because something like the RSAref
-	 * code may not hook properly, and if you own one of these
-	 * cards then you have the right to do RSA operations on it
-	 * anyway! */ 
-	meth1 = RSA_PKCS1_SSLeay();
-	cswift_rsa.rsa_pub_enc = meth1->rsa_pub_enc;
-	cswift_rsa.rsa_pub_dec = meth1->rsa_pub_dec;
-	cswift_rsa.rsa_priv_enc = meth1->rsa_priv_enc;
-	cswift_rsa.rsa_priv_dec = meth1->rsa_priv_dec;
-#endif
-
-#ifndef OPENSSL_NO_DH
-	/* Much the same for Diffie-Hellman */
-	meth2 = DH_OpenSSL();
-	cswift_dh.generate_key = meth2->generate_key;
-	cswift_dh.compute_key = meth2->compute_key;
-#endif
-
-	/* Ensure the cswift error handling is set up */
-	ERR_load_CSWIFT_strings();
-	return 1;
-	}
-
-#ifndef ENGINE_DYNAMIC_SUPPORT
-static ENGINE *engine_cswift(void)
-	{
-	ENGINE *ret = ENGINE_new();
-	if(!ret)
-		return NULL;
-	if(!bind_helper(ret))
-		{
-		ENGINE_free(ret);
-		return NULL;
-		}
-	return ret;
-	}
-
-void ENGINE_load_cswift(void)
-	{
-	/* Copied from eng_[openssl|dyn].c */
-	ENGINE *toadd = engine_cswift();
-	if(!toadd) return;
-	ENGINE_add(toadd);
-	ENGINE_free(toadd);
-	ERR_clear_error();
-	}
-#endif
-
-/* This is a process-global DSO handle used for loading and unloading
- * the CryptoSwift library. NB: This is only set (or unset) during an
- * init() or finish() call (reference counts permitting) and they're
- * operating with global locks, so this should be thread-safe
- * implicitly. */
-static DSO *cswift_dso = NULL;
-
-/* These are the function pointers that are (un)set when the library has
- * successfully (un)loaded. */
-t_swAcquireAccContext *p_CSwift_AcquireAccContext = NULL;
-t_swAttachKeyParam *p_CSwift_AttachKeyParam = NULL;
-t_swSimpleRequest *p_CSwift_SimpleRequest = NULL;
-t_swReleaseAccContext *p_CSwift_ReleaseAccContext = NULL;
-
-/* Used in the DSO operations. */
-static const char *CSWIFT_LIBNAME = NULL;
-static const char *get_CSWIFT_LIBNAME(void)
-	{
-	if(CSWIFT_LIBNAME)
-		return CSWIFT_LIBNAME;
-	return "swift";
-	}
-static void free_CSWIFT_LIBNAME(void)
-	{
-	if(CSWIFT_LIBNAME)
-		OPENSSL_free((void*)CSWIFT_LIBNAME);
-	CSWIFT_LIBNAME = NULL;
-	}
-static long set_CSWIFT_LIBNAME(const char *name)
-	{
-	free_CSWIFT_LIBNAME();
-	return (((CSWIFT_LIBNAME = BUF_strdup(name)) != NULL) ? 1 : 0);
-	}
-static const char *CSWIFT_F1 = "swAcquireAccContext";
-static const char *CSWIFT_F2 = "swAttachKeyParam";
-static const char *CSWIFT_F3 = "swSimpleRequest";
-static const char *CSWIFT_F4 = "swReleaseAccContext";
-
-
-/* CryptoSwift library functions and mechanics - these are used by the
- * higher-level functions further down. NB: As and where there's no
- * error checking, take a look lower down where these functions are
- * called, the checking and error handling is probably down there. */
-
-/* utility function to obtain a context */
-static int get_context(SW_CONTEXT_HANDLE *hac)
-	{
-        SW_STATUS status;
- 
-        status = p_CSwift_AcquireAccContext(hac);
-        if(status != SW_OK)
-                return 0;
-        return 1;
-	}
- 
-/* similarly to release one. */
-static void release_context(SW_CONTEXT_HANDLE hac)
-	{
-        p_CSwift_ReleaseAccContext(hac);
-	}
-
-/* Destructor (complements the "ENGINE_cswift()" constructor) */
-static int cswift_destroy(ENGINE *e)
-	{
-	free_CSWIFT_LIBNAME();
-	ERR_unload_CSWIFT_strings();
-	return 1;
-	}
-
-/* (de)initialisation functions. */
-static int cswift_init(ENGINE *e)
-	{
-        SW_CONTEXT_HANDLE hac;
-        t_swAcquireAccContext *p1;
-        t_swAttachKeyParam *p2;
-        t_swSimpleRequest *p3;
-        t_swReleaseAccContext *p4;
-
-	if(cswift_dso != NULL)
-		{
-		CSWIFTerr(CSWIFT_F_CSWIFT_INIT,CSWIFT_R_ALREADY_LOADED);
-		goto err;
-		}
-	/* Attempt to load libswift.so/swift.dll/whatever. */
-	cswift_dso = DSO_load(NULL, get_CSWIFT_LIBNAME(), NULL, 0);
-	if(cswift_dso == NULL)
-		{
-		CSWIFTerr(CSWIFT_F_CSWIFT_INIT,CSWIFT_R_NOT_LOADED);
-		goto err;
-		}
-	if(!(p1 = (t_swAcquireAccContext *)
-				DSO_bind_func(cswift_dso, CSWIFT_F1)) ||
-			!(p2 = (t_swAttachKeyParam *)
-				DSO_bind_func(cswift_dso, CSWIFT_F2)) ||
-			!(p3 = (t_swSimpleRequest *)
-				DSO_bind_func(cswift_dso, CSWIFT_F3)) ||
-			!(p4 = (t_swReleaseAccContext *)
-				DSO_bind_func(cswift_dso, CSWIFT_F4)))
-		{
-		CSWIFTerr(CSWIFT_F_CSWIFT_INIT,CSWIFT_R_NOT_LOADED);
-		goto err;
-		}
-	/* Copy the pointers */
-	p_CSwift_AcquireAccContext = p1;
-	p_CSwift_AttachKeyParam = p2;
-	p_CSwift_SimpleRequest = p3;
-	p_CSwift_ReleaseAccContext = p4;
-	/* Try and get a context - if not, we may have a DSO but no
-	 * accelerator! */
-	if(!get_context(&hac))
-		{
-		CSWIFTerr(CSWIFT_F_CSWIFT_INIT,CSWIFT_R_UNIT_FAILURE);
-		goto err;
-		}
-	release_context(hac);
-	/* Everything's fine. */
-	return 1;
-err:
-	if(cswift_dso)
-		DSO_free(cswift_dso);
-	p_CSwift_AcquireAccContext = NULL;
-	p_CSwift_AttachKeyParam = NULL;
-	p_CSwift_SimpleRequest = NULL;
-	p_CSwift_ReleaseAccContext = NULL;
-	return 0;
-	}
-
-static int cswift_finish(ENGINE *e)
-	{
-	free_CSWIFT_LIBNAME();
-	if(cswift_dso == NULL)
-		{
-		CSWIFTerr(CSWIFT_F_CSWIFT_FINISH,CSWIFT_R_NOT_LOADED);
-		return 0;
-		}
-	if(!DSO_free(cswift_dso))
-		{
-		CSWIFTerr(CSWIFT_F_CSWIFT_FINISH,CSWIFT_R_UNIT_FAILURE);
-		return 0;
-		}
-	cswift_dso = NULL;
-	p_CSwift_AcquireAccContext = NULL;
-	p_CSwift_AttachKeyParam = NULL;
-	p_CSwift_SimpleRequest = NULL;
-	p_CSwift_ReleaseAccContext = NULL;
-	return 1;
-	}
-
-static int cswift_ctrl(ENGINE *e, int cmd, long i, void *p, void (*f)())
-	{
-	int initialised = ((cswift_dso == NULL) ? 0 : 1);
-	switch(cmd)
-		{
-	case CSWIFT_CMD_SO_PATH:
-		if(p == NULL)
-			{
-			CSWIFTerr(CSWIFT_F_CSWIFT_CTRL,ERR_R_PASSED_NULL_PARAMETER);
-			return 0;
-			}
-		if(initialised)
-			{
-			CSWIFTerr(CSWIFT_F_CSWIFT_CTRL,CSWIFT_R_ALREADY_LOADED);
-			return 0;
-			}
-		return set_CSWIFT_LIBNAME((const char *)p);
-	default:
-		break;
-		}
-	CSWIFTerr(CSWIFT_F_CSWIFT_CTRL,CSWIFT_R_CTRL_COMMAND_NOT_IMPLEMENTED);
-	return 0;
-	}
-
-/* Un petit mod_exp */
-static int cswift_mod_exp(BIGNUM *r, const BIGNUM *a, const BIGNUM *p,
-			const BIGNUM *m, BN_CTX *ctx)
-	{
-	/* I need somewhere to store temporary serialised values for
-	 * use with the CryptoSwift API calls. A neat cheat - I'll use
-	 * BIGNUMs from the BN_CTX but access their arrays directly as
-	 * byte arrays <grin>. This way I don't have to clean anything
-	 * up. */
-	BIGNUM *modulus;
-	BIGNUM *exponent;
-	BIGNUM *argument;
-	BIGNUM *result;
-	SW_STATUS sw_status;
-	SW_LARGENUMBER arg, res;
-	SW_PARAM sw_param;
-	SW_CONTEXT_HANDLE hac;
-	int to_return, acquired;
- 
-	modulus = exponent = argument = result = NULL;
-	to_return = 0; /* expect failure */
-	acquired = 0;
- 
-	if(!get_context(&hac))
-		{
-		CSWIFTerr(CSWIFT_F_CSWIFT_MOD_EXP,CSWIFT_R_UNIT_FAILURE);
-		goto err;
-		}
-	acquired = 1;
-	/* Prepare the params */
-	BN_CTX_start(ctx);
-	modulus = BN_CTX_get(ctx);
-	exponent = BN_CTX_get(ctx);
-	argument = BN_CTX_get(ctx);
-	result = BN_CTX_get(ctx);
-	if(!result)
-		{
-		CSWIFTerr(CSWIFT_F_CSWIFT_MOD_EXP,CSWIFT_R_BN_CTX_FULL);
-		goto err;
-		}
-	if(!bn_wexpand(modulus, m->top) || !bn_wexpand(exponent, p->top) ||
-		!bn_wexpand(argument, a->top) || !bn_wexpand(result, m->top))
-		{
-		CSWIFTerr(CSWIFT_F_CSWIFT_MOD_EXP,CSWIFT_R_BN_EXPAND_FAIL);
-		goto err;
-		}
-	sw_param.type = SW_ALG_EXP;
-	sw_param.up.exp.modulus.nbytes = BN_bn2bin(m,
-		(unsigned char *)modulus->d);
-	sw_param.up.exp.modulus.value = (unsigned char *)modulus->d;
-	sw_param.up.exp.exponent.nbytes = BN_bn2bin(p,
-		(unsigned char *)exponent->d);
-	sw_param.up.exp.exponent.value = (unsigned char *)exponent->d;
-	/* Attach the key params */
-	sw_status = p_CSwift_AttachKeyParam(hac, &sw_param);
-	switch(sw_status)
-		{
-	case SW_OK:
-		break;
-	case SW_ERR_INPUT_SIZE:
-		CSWIFTerr(CSWIFT_F_CSWIFT_MOD_EXP,CSWIFT_R_BAD_KEY_SIZE);
-		goto err;
-	default:
-		{
-		char tmpbuf[DECIMAL_SIZE(sw_status)+1];
-		CSWIFTerr(CSWIFT_F_CSWIFT_MOD_EXP,CSWIFT_R_REQUEST_FAILED);
-		sprintf(tmpbuf, "%ld", sw_status);
-		ERR_add_error_data(2, "CryptoSwift error number is ",tmpbuf);
-		}
-		goto err;
-		}
-	/* Prepare the argument and response */
-	arg.nbytes = BN_bn2bin(a, (unsigned char *)argument->d);
-	arg.value = (unsigned char *)argument->d;
-	res.nbytes = BN_num_bytes(m);
-	memset(result->d, 0, res.nbytes);
-	res.value = (unsigned char *)result->d;
-	/* Perform the operation */
-	if((sw_status = p_CSwift_SimpleRequest(hac, SW_CMD_MODEXP, &arg, 1,
-		&res, 1)) != SW_OK)
-		{
-		char tmpbuf[DECIMAL_SIZE(sw_status)+1];
-		CSWIFTerr(CSWIFT_F_CSWIFT_MOD_EXP,CSWIFT_R_REQUEST_FAILED);
-		sprintf(tmpbuf, "%ld", sw_status);
-		ERR_add_error_data(2, "CryptoSwift error number is ",tmpbuf);
-		goto err;
-		}
-	/* Convert the response */
-	BN_bin2bn((unsigned char *)result->d, res.nbytes, r);
-	to_return = 1;
-err:
-	if(acquired)
-		release_context(hac);
-	BN_CTX_end(ctx);
-	return to_return;
-	}
-
-/* Un petit mod_exp chinois */
-static int cswift_mod_exp_crt(BIGNUM *r, const BIGNUM *a, const BIGNUM *p,
-			const BIGNUM *q, const BIGNUM *dmp1,
-			const BIGNUM *dmq1, const BIGNUM *iqmp, BN_CTX *ctx)
-	{
-	SW_STATUS sw_status;
-	SW_LARGENUMBER arg, res;
-	SW_PARAM sw_param;
-	SW_CONTEXT_HANDLE hac;
-	BIGNUM *rsa_p = NULL;
-	BIGNUM *rsa_q = NULL;
-	BIGNUM *rsa_dmp1 = NULL;
-	BIGNUM *rsa_dmq1 = NULL;
-	BIGNUM *rsa_iqmp = NULL;
-	BIGNUM *argument = NULL;
-	BIGNUM *result = NULL;
-	int to_return = 0; /* expect failure */
-	int acquired = 0;
- 
-	if(!get_context(&hac))
-		{
-		CSWIFTerr(CSWIFT_F_CSWIFT_MOD_EXP_CRT,CSWIFT_R_UNIT_FAILURE);
-		goto err;
-		}
-	acquired = 1;
-	/* Prepare the params */
-	BN_CTX_start(ctx);
-	rsa_p = BN_CTX_get(ctx);
-	rsa_q = BN_CTX_get(ctx);
-	rsa_dmp1 = BN_CTX_get(ctx);
-	rsa_dmq1 = BN_CTX_get(ctx);
-	rsa_iqmp = BN_CTX_get(ctx);
-	argument = BN_CTX_get(ctx);
-	result = BN_CTX_get(ctx);
-	if(!result)
-		{
-		CSWIFTerr(CSWIFT_F_CSWIFT_MOD_EXP_CRT,CSWIFT_R_BN_CTX_FULL);
-		goto err;
-		}
-	if(!bn_wexpand(rsa_p, p->top) || !bn_wexpand(rsa_q, q->top) ||
-			!bn_wexpand(rsa_dmp1, dmp1->top) ||
-			!bn_wexpand(rsa_dmq1, dmq1->top) ||
-			!bn_wexpand(rsa_iqmp, iqmp->top) ||
-			!bn_wexpand(argument, a->top) ||
-			!bn_wexpand(result, p->top + q->top))
-		{
-		CSWIFTerr(CSWIFT_F_CSWIFT_MOD_EXP_CRT,CSWIFT_R_BN_EXPAND_FAIL);
-		goto err;
-		}
-	sw_param.type = SW_ALG_CRT;
-	sw_param.up.crt.p.nbytes = BN_bn2bin(p, (unsigned char *)rsa_p->d);
-	sw_param.up.crt.p.value = (unsigned char *)rsa_p->d;
-	sw_param.up.crt.q.nbytes = BN_bn2bin(q, (unsigned char *)rsa_q->d);
-	sw_param.up.crt.q.value = (unsigned char *)rsa_q->d;
-	sw_param.up.crt.dmp1.nbytes = BN_bn2bin(dmp1,
-		(unsigned char *)rsa_dmp1->d);
-	sw_param.up.crt.dmp1.value = (unsigned char *)rsa_dmp1->d;
-	sw_param.up.crt.dmq1.nbytes = BN_bn2bin(dmq1,
-		(unsigned char *)rsa_dmq1->d);
-	sw_param.up.crt.dmq1.value = (unsigned char *)rsa_dmq1->d;
-	sw_param.up.crt.iqmp.nbytes = BN_bn2bin(iqmp,
-		(unsigned char *)rsa_iqmp->d);
-	sw_param.up.crt.iqmp.value = (unsigned char *)rsa_iqmp->d;
-	/* Attach the key params */
-	sw_status = p_CSwift_AttachKeyParam(hac, &sw_param);
-	switch(sw_status)
-		{
-	case SW_OK:
-		break;
-	case SW_ERR_INPUT_SIZE:
-		CSWIFTerr(CSWIFT_F_CSWIFT_MOD_EXP_CRT,CSWIFT_R_BAD_KEY_SIZE);
-		goto err;
-	default:
-		{
-		char tmpbuf[DECIMAL_SIZE(sw_status)+1];
-		CSWIFTerr(CSWIFT_F_CSWIFT_MOD_EXP_CRT,CSWIFT_R_REQUEST_FAILED);
-		sprintf(tmpbuf, "%ld", sw_status);
-		ERR_add_error_data(2, "CryptoSwift error number is ",tmpbuf);
-		}
-		goto err;
-		}
-	/* Prepare the argument and response */
-	arg.nbytes = BN_bn2bin(a, (unsigned char *)argument->d);
-	arg.value = (unsigned char *)argument->d;
-	res.nbytes = 2 * BN_num_bytes(p);
-	memset(result->d, 0, res.nbytes);
-	res.value = (unsigned char *)result->d;
-	/* Perform the operation */
-	if((sw_status = p_CSwift_SimpleRequest(hac, SW_CMD_MODEXP_CRT, &arg, 1,
-		&res, 1)) != SW_OK)
-		{
-		char tmpbuf[DECIMAL_SIZE(sw_status)+1];
-		CSWIFTerr(CSWIFT_F_CSWIFT_MOD_EXP_CRT,CSWIFT_R_REQUEST_FAILED);
-		sprintf(tmpbuf, "%ld", sw_status);
-		ERR_add_error_data(2, "CryptoSwift error number is ",tmpbuf);
-		goto err;
-		}
-	/* Convert the response */
-	BN_bin2bn((unsigned char *)result->d, res.nbytes, r);
-	to_return = 1;
-err:
-	if(acquired)
-		release_context(hac);
-	BN_CTX_end(ctx);
-	return to_return;
-	}
- 
-#ifndef OPENSSL_NO_RSA
-static int cswift_rsa_mod_exp(BIGNUM *r0, const BIGNUM *I, RSA *rsa)
-	{
-	BN_CTX *ctx;
-	int to_return = 0;
-
-	if((ctx = BN_CTX_new()) == NULL)
-		goto err;
-	if(!rsa->p || !rsa->q || !rsa->dmp1 || !rsa->dmq1 || !rsa->iqmp)
-		{
-		CSWIFTerr(CSWIFT_F_CSWIFT_RSA_MOD_EXP,CSWIFT_R_MISSING_KEY_COMPONENTS);
-		goto err;
-		}
-	to_return = cswift_mod_exp_crt(r0, I, rsa->p, rsa->q, rsa->dmp1,
-		rsa->dmq1, rsa->iqmp, ctx);
-err:
-	if(ctx)
-		BN_CTX_free(ctx);
-	return to_return;
-	}
-#endif
-
-/* This function is aliased to mod_exp (with the mont stuff dropped). */
-static int cswift_mod_exp_mont(BIGNUM *r, const BIGNUM *a, const BIGNUM *p,
-		const BIGNUM *m, BN_CTX *ctx, BN_MONT_CTX *m_ctx)
-	{
-	return cswift_mod_exp(r, a, p, m, ctx);
-	}
-
-#ifndef OPENSSL_NO_DSA
-static DSA_SIG *cswift_dsa_sign(const unsigned char *dgst, int dlen, DSA *dsa)
-	{
-	SW_CONTEXT_HANDLE hac;
-	SW_PARAM sw_param;
-	SW_STATUS sw_status;
-	SW_LARGENUMBER arg, res;
-	unsigned char *ptr;
-	BN_CTX *ctx;
-	BIGNUM *dsa_p = NULL;
-	BIGNUM *dsa_q = NULL;
-	BIGNUM *dsa_g = NULL;
-	BIGNUM *dsa_key = NULL;
-	BIGNUM *result = NULL;
-	DSA_SIG *to_return = NULL;
-	int acquired = 0;
-
-	if((ctx = BN_CTX_new()) == NULL)
-		goto err;
-	if(!get_context(&hac))
-		{
-		CSWIFTerr(CSWIFT_F_CSWIFT_DSA_SIGN,CSWIFT_R_UNIT_FAILURE);
-		goto err;
-		}
-	acquired = 1;
-	/* Prepare the params */
-	BN_CTX_start(ctx);
-	dsa_p = BN_CTX_get(ctx);
-	dsa_q = BN_CTX_get(ctx);
-	dsa_g = BN_CTX_get(ctx);
-	dsa_key = BN_CTX_get(ctx);
-	result = BN_CTX_get(ctx);
-	if(!result)
-		{
-		CSWIFTerr(CSWIFT_F_CSWIFT_DSA_SIGN,CSWIFT_R_BN_CTX_FULL);
-		goto err;
-		}
-	if(!bn_wexpand(dsa_p, dsa->p->top) ||
-			!bn_wexpand(dsa_q, dsa->q->top) ||
-			!bn_wexpand(dsa_g, dsa->g->top) ||
-			!bn_wexpand(dsa_key, dsa->priv_key->top) ||
-			!bn_wexpand(result, dsa->p->top))
-		{
-		CSWIFTerr(CSWIFT_F_CSWIFT_DSA_SIGN,CSWIFT_R_BN_EXPAND_FAIL);
-		goto err;
-		}
-	sw_param.type = SW_ALG_DSA;
-	sw_param.up.dsa.p.nbytes = BN_bn2bin(dsa->p,
-				(unsigned char *)dsa_p->d);
-	sw_param.up.dsa.p.value = (unsigned char *)dsa_p->d;
-	sw_param.up.dsa.q.nbytes = BN_bn2bin(dsa->q,
-				(unsigned char *)dsa_q->d);
-	sw_param.up.dsa.q.value = (unsigned char *)dsa_q->d;
-	sw_param.up.dsa.g.nbytes = BN_bn2bin(dsa->g,
-				(unsigned char *)dsa_g->d);
-	sw_param.up.dsa.g.value = (unsigned char *)dsa_g->d;
-	sw_param.up.dsa.key.nbytes = BN_bn2bin(dsa->priv_key,
-				(unsigned char *)dsa_key->d);
-	sw_param.up.dsa.key.value = (unsigned char *)dsa_key->d;
-	/* Attach the key params */
-	sw_status = p_CSwift_AttachKeyParam(hac, &sw_param);
-	switch(sw_status)
-		{
-	case SW_OK:
-		break;
-	case SW_ERR_INPUT_SIZE:
-		CSWIFTerr(CSWIFT_F_CSWIFT_DSA_SIGN,CSWIFT_R_BAD_KEY_SIZE);
-		goto err;
-	default:
-		{
-		char tmpbuf[DECIMAL_SIZE(sw_status)+1];
-		CSWIFTerr(CSWIFT_F_CSWIFT_DSA_SIGN,CSWIFT_R_REQUEST_FAILED);
-		sprintf(tmpbuf, "%ld", sw_status);
-		ERR_add_error_data(2, "CryptoSwift error number is ",tmpbuf);
-		}
-		goto err;
-		}
-	/* Prepare the argument and response */
-	arg.nbytes = dlen;
-	arg.value = (unsigned char *)dgst;
-	res.nbytes = BN_num_bytes(dsa->p);
-	memset(result->d, 0, res.nbytes);
-	res.value = (unsigned char *)result->d;
-	/* Perform the operation */
-	sw_status = p_CSwift_SimpleRequest(hac, SW_CMD_DSS_SIGN, &arg, 1,
-		&res, 1);
-	if(sw_status != SW_OK)
-		{
-		char tmpbuf[DECIMAL_SIZE(sw_status)+1];
-		CSWIFTerr(CSWIFT_F_CSWIFT_DSA_SIGN,CSWIFT_R_REQUEST_FAILED);
-		sprintf(tmpbuf, "%ld", sw_status);
-		ERR_add_error_data(2, "CryptoSwift error number is ",tmpbuf);
-		goto err;
-		}
-	/* Convert the response */
-	ptr = (unsigned char *)result->d;
-	if((to_return = DSA_SIG_new()) == NULL)
-		goto err;
-	to_return->r = BN_bin2bn((unsigned char *)result->d, 20, NULL);
-	to_return->s = BN_bin2bn((unsigned char *)result->d + 20, 20, NULL);
-
-err:
-	if(acquired)
-		release_context(hac);
-	if(ctx)
-		{
-		BN_CTX_end(ctx);
-		BN_CTX_free(ctx);
-		}
-	return to_return;
-	}
-
-static int cswift_dsa_verify(const unsigned char *dgst, int dgst_len,
-				DSA_SIG *sig, DSA *dsa)
-	{
-	SW_CONTEXT_HANDLE hac;
-	SW_PARAM sw_param;
-	SW_STATUS sw_status;
-	SW_LARGENUMBER arg[2], res;
-	unsigned long sig_result;
-	BN_CTX *ctx;
-	BIGNUM *dsa_p = NULL;
-	BIGNUM *dsa_q = NULL;
-	BIGNUM *dsa_g = NULL;
-	BIGNUM *dsa_key = NULL;
-	BIGNUM *argument = NULL;
-	int to_return = -1;
-	int acquired = 0;
-
-	if((ctx = BN_CTX_new()) == NULL)
-		goto err;
-	if(!get_context(&hac))
-		{
-		CSWIFTerr(CSWIFT_F_CSWIFT_DSA_VERIFY,CSWIFT_R_UNIT_FAILURE);
-		goto err;
-		}
-	acquired = 1;
-	/* Prepare the params */
-	BN_CTX_start(ctx);
-	dsa_p = BN_CTX_get(ctx);
-	dsa_q = BN_CTX_get(ctx);
-	dsa_g = BN_CTX_get(ctx);
-	dsa_key = BN_CTX_get(ctx);
-	argument = BN_CTX_get(ctx);
-	if(!argument)
-		{
-		CSWIFTerr(CSWIFT_F_CSWIFT_DSA_VERIFY,CSWIFT_R_BN_CTX_FULL);
-		goto err;
-		}
-	if(!bn_wexpand(dsa_p, dsa->p->top) ||
-			!bn_wexpand(dsa_q, dsa->q->top) ||
-			!bn_wexpand(dsa_g, dsa->g->top) ||
-			!bn_wexpand(dsa_key, dsa->pub_key->top) ||
-			!bn_wexpand(argument, 40))
-		{
-		CSWIFTerr(CSWIFT_F_CSWIFT_DSA_VERIFY,CSWIFT_R_BN_EXPAND_FAIL);
-		goto err;
-		}
-	sw_param.type = SW_ALG_DSA;
-	sw_param.up.dsa.p.nbytes = BN_bn2bin(dsa->p,
-				(unsigned char *)dsa_p->d);
-	sw_param.up.dsa.p.value = (unsigned char *)dsa_p->d;
-	sw_param.up.dsa.q.nbytes = BN_bn2bin(dsa->q,
-				(unsigned char *)dsa_q->d);
-	sw_param.up.dsa.q.value = (unsigned char *)dsa_q->d;
-	sw_param.up.dsa.g.nbytes = BN_bn2bin(dsa->g,
-				(unsigned char *)dsa_g->d);
-	sw_param.up.dsa.g.value = (unsigned char *)dsa_g->d;
-	sw_param.up.dsa.key.nbytes = BN_bn2bin(dsa->pub_key,
-				(unsigned char *)dsa_key->d);
-	sw_param.up.dsa.key.value = (unsigned char *)dsa_key->d;
-	/* Attach the key params */
-	sw_status = p_CSwift_AttachKeyParam(hac, &sw_param);
-	switch(sw_status)
-		{
-	case SW_OK:
-		break;
-	case SW_ERR_INPUT_SIZE:
-		CSWIFTerr(CSWIFT_F_CSWIFT_DSA_VERIFY,CSWIFT_R_BAD_KEY_SIZE);
-		goto err;
-	default:
-		{
-		char tmpbuf[DECIMAL_SIZE(sw_status)+1];
-		CSWIFTerr(CSWIFT_F_CSWIFT_DSA_VERIFY,CSWIFT_R_REQUEST_FAILED);
-		sprintf(tmpbuf, "%ld", sw_status);
-		ERR_add_error_data(2, "CryptoSwift error number is ",tmpbuf);
-		}
-		goto err;
-		}
-	/* Prepare the argument and response */
-	arg[0].nbytes = dgst_len;
-	arg[0].value = (unsigned char *)dgst;
-	arg[1].nbytes = 40;
-	arg[1].value = (unsigned char *)argument->d;
-	memset(arg[1].value, 0, 40);
-	BN_bn2bin(sig->r, arg[1].value + 20 - BN_num_bytes(sig->r));
-	BN_bn2bin(sig->s, arg[1].value + 40 - BN_num_bytes(sig->s));
-	res.nbytes = 4; /* unsigned long */
-	res.value = (unsigned char *)(&sig_result);
-	/* Perform the operation */
-	sw_status = p_CSwift_SimpleRequest(hac, SW_CMD_DSS_VERIFY, arg, 2,
-		&res, 1);
-	if(sw_status != SW_OK)
-		{
-		char tmpbuf[DECIMAL_SIZE(sw_status)+1];
-		CSWIFTerr(CSWIFT_F_CSWIFT_DSA_VERIFY,CSWIFT_R_REQUEST_FAILED);
-		sprintf(tmpbuf, "%ld", sw_status);
-		ERR_add_error_data(2, "CryptoSwift error number is ",tmpbuf);
-		goto err;
-		}
-	/* Convert the response */
-	to_return = ((sig_result == 0) ? 0 : 1);
-
-err:
-	if(acquired)
-		release_context(hac);
-	if(ctx)
-		{
-		BN_CTX_end(ctx);
-		BN_CTX_free(ctx);
-		}
-	return to_return;
-	}
-#endif
-
-#ifndef OPENSSL_NO_DH
-/* This function is aliased to mod_exp (with the dh and mont dropped). */
-static int cswift_mod_exp_dh(const DH *dh, BIGNUM *r,
-		const BIGNUM *a, const BIGNUM *p,
-		const BIGNUM *m, BN_CTX *ctx, BN_MONT_CTX *m_ctx)
-	{
-	return cswift_mod_exp(r, a, p, m, ctx);
-	}
-#endif
-
-/* Random bytes are good */
-static int cswift_rand_bytes(unsigned char *buf, int num)
-{
-	SW_CONTEXT_HANDLE hac;
-	SW_STATUS swrc;
-	SW_LARGENUMBER largenum;
-	size_t nbytes = 0;
-	int acquired = 0;
-	int to_return = 0; /* assume failure */
-
-	if (!get_context(&hac))
-	{
-		CSWIFTerr(CSWIFT_F_CSWIFT_CTRL, CSWIFT_R_UNIT_FAILURE);
-		goto err;
-	}
-	acquired = 1;
-
-	while (nbytes < (size_t)num)
-	{
-		/* tell CryptoSwift how many bytes we want and where we want it.
-		 * Note: - CryptoSwift cannot do more than 4096 bytes at a time.
-		 *       - CryptoSwift can only do multiple of 32-bits. */
-		largenum.value = (SW_BYTE *) buf + nbytes;
-		if (4096 > num - nbytes)
-			largenum.nbytes = num - nbytes;
-		else
-			largenum.nbytes = 4096;
-
-		swrc = p_CSwift_SimpleRequest(hac, SW_CMD_RAND, NULL, 0, &largenum, 1);
-		if (swrc != SW_OK)
-		{
-			char tmpbuf[20];
-			CSWIFTerr(CSWIFT_F_CSWIFT_CTRL, CSWIFT_R_REQUEST_FAILED);
-			sprintf(tmpbuf, "%ld", swrc);
-			ERR_add_error_data(2, "CryptoSwift error number is ", tmpbuf);
-			goto err;
-		}
-
-		nbytes += largenum.nbytes;
-	}
-	to_return = 1;  /* success */
-
-err:
-	if (acquired)
-		release_context(hac);
-	return to_return;
-}
-
-static int cswift_rand_status(void)
-{
-	return 1;
-}
-
-
-/* This stuff is needed if this ENGINE is being compiled into a self-contained
- * shared-library. */
-#ifdef ENGINE_DYNAMIC_SUPPORT
-static int bind_fn(ENGINE *e, const char *id)
-	{
-	if(id && (strcmp(id, engine_cswift_id) != 0))
-		return 0;
-	if(!bind_helper(e))
-		return 0;
-	return 1;
-	}       
-IMPLEMENT_DYNAMIC_CHECK_FN()
-IMPLEMENT_DYNAMIC_BIND_FN(bind_fn)
-#endif /* ENGINE_DYNAMIC_SUPPORT */
-
-#endif /* !OPENSSL_NO_HW_CSWIFT */
-#endif /* !OPENSSL_NO_HW */
diff --git a/crypto/openssl/crypto/engine/hw_cswift_err.c b/crypto/openssl/crypto/engine/hw_cswift_err.c
deleted file mode 100644
index 684f53bf27ec..000000000000
--- a/crypto/openssl/crypto/engine/hw_cswift_err.c
+++ /dev/null
@@ -1,149 +0,0 @@
-/* hw_cswift_err.c */
-/* ====================================================================
- * Copyright (c) 1999 The OpenSSL Project.  All rights reserved.
- *
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions
- * are met:
- *
- * 1. Redistributions of source code must retain the above copyright
- *    notice, this list of conditions and the following disclaimer. 
- *
- * 2. Redistributions in binary form must reproduce the above copyright
- *    notice, this list of conditions and the following disclaimer in
- *    the documentation and/or other materials provided with the
- *    distribution.
- *
- * 3. All advertising materials mentioning features or use of this
- *    software must display the following acknowledgment:
- *    "This product includes software developed by the OpenSSL Project
- *    for use in the OpenSSL Toolkit. (http://www.OpenSSL.org/)"
- *
- * 4. The names "OpenSSL Toolkit" and "OpenSSL Project" must not be used to
- *    endorse or promote products derived from this software without
- *    prior written permission. For written permission, please contact
- *    openssl-core@OpenSSL.org.
- *
- * 5. Products derived from this software may not be called "OpenSSL"
- *    nor may "OpenSSL" appear in their names without prior written
- *    permission of the OpenSSL Project.
- *
- * 6. Redistributions of any form whatsoever must retain the following
- *    acknowledgment:
- *    "This product includes software developed by the OpenSSL Project
- *    for use in the OpenSSL Toolkit (http://www.OpenSSL.org/)"
- *
- * THIS SOFTWARE IS PROVIDED BY THE OpenSSL PROJECT ``AS IS'' AND ANY
- * EXPRESSED OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
- * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR
- * PURPOSE ARE DISCLAIMED.  IN NO EVENT SHALL THE OpenSSL PROJECT OR
- * ITS CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
- * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
- * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
- * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
- * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
- * STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
- * ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED
- * OF THE POSSIBILITY OF SUCH DAMAGE.
- * ====================================================================
- *
- * This product includes cryptographic software written by Eric Young
- * (eay@cryptsoft.com).  This product includes software written by Tim
- * Hudson (tjh@cryptsoft.com).
- *
- */
-
-/* NOTE: this file was auto generated by the mkerr.pl script: any changes
- * made to it will be overwritten when the script next updates this file,
- * only reason strings will be preserved.
- */
-
-#include <stdio.h>
-#include <openssl/err.h>
-#include "hw_cswift_err.h"
-
-/* BEGIN ERROR CODES */
-#ifndef OPENSSL_NO_ERR
-static ERR_STRING_DATA CSWIFT_str_functs[]=
-	{
-{ERR_PACK(0,CSWIFT_F_CSWIFT_CTRL,0),	"CSWIFT_CTRL"},
-{ERR_PACK(0,CSWIFT_F_CSWIFT_DSA_SIGN,0),	"CSWIFT_DSA_SIGN"},
-{ERR_PACK(0,CSWIFT_F_CSWIFT_DSA_VERIFY,0),	"CSWIFT_DSA_VERIFY"},
-{ERR_PACK(0,CSWIFT_F_CSWIFT_FINISH,0),	"CSWIFT_FINISH"},
-{ERR_PACK(0,CSWIFT_F_CSWIFT_INIT,0),	"CSWIFT_INIT"},
-{ERR_PACK(0,CSWIFT_F_CSWIFT_MOD_EXP,0),	"CSWIFT_MOD_EXP"},
-{ERR_PACK(0,CSWIFT_F_CSWIFT_MOD_EXP_CRT,0),	"CSWIFT_MOD_EXP_CRT"},
-{ERR_PACK(0,CSWIFT_F_CSWIFT_RSA_MOD_EXP,0),	"CSWIFT_RSA_MOD_EXP"},
-{0,NULL}
-	};
-
-static ERR_STRING_DATA CSWIFT_str_reasons[]=
-	{
-{CSWIFT_R_ALREADY_LOADED                 ,"already loaded"},
-{CSWIFT_R_BAD_KEY_SIZE                   ,"bad key size"},
-{CSWIFT_R_BN_CTX_FULL                    ,"bn ctx full"},
-{CSWIFT_R_BN_EXPAND_FAIL                 ,"bn expand fail"},
-{CSWIFT_R_CTRL_COMMAND_NOT_IMPLEMENTED   ,"ctrl command not implemented"},
-{CSWIFT_R_MISSING_KEY_COMPONENTS         ,"missing key components"},
-{CSWIFT_R_NOT_LOADED                     ,"not loaded"},
-{CSWIFT_R_REQUEST_FAILED                 ,"request failed"},
-{CSWIFT_R_UNIT_FAILURE                   ,"unit failure"},
-{0,NULL}
-	};
-
-#endif
-
-#ifdef CSWIFT_LIB_NAME
-static ERR_STRING_DATA CSWIFT_lib_name[]=
-        {
-{0	,CSWIFT_LIB_NAME},
-{0,NULL}
-	};
-#endif
-
-
-static int CSWIFT_lib_error_code=0;
-static int CSWIFT_error_init=1;
-
-static void ERR_load_CSWIFT_strings(void)
-	{
-	if (CSWIFT_lib_error_code == 0)
-		CSWIFT_lib_error_code=ERR_get_next_error_library();
-
-	if (CSWIFT_error_init)
-		{
-		CSWIFT_error_init=0;
-#ifndef OPENSSL_NO_ERR
-		ERR_load_strings(CSWIFT_lib_error_code,CSWIFT_str_functs);
-		ERR_load_strings(CSWIFT_lib_error_code,CSWIFT_str_reasons);
-#endif
-
-#ifdef CSWIFT_LIB_NAME
-		CSWIFT_lib_name->error = ERR_PACK(CSWIFT_lib_error_code,0,0);
-		ERR_load_strings(0,CSWIFT_lib_name);
-#endif
-		}
-	}
-
-static void ERR_unload_CSWIFT_strings(void)
-	{
-	if (CSWIFT_error_init == 0)
-		{
-#ifndef OPENSSL_NO_ERR
-		ERR_unload_strings(CSWIFT_lib_error_code,CSWIFT_str_functs);
-		ERR_unload_strings(CSWIFT_lib_error_code,CSWIFT_str_reasons);
-#endif
-
-#ifdef CSWIFT_LIB_NAME
-		ERR_unload_strings(0,CSWIFT_lib_name);
-#endif
-		CSWIFT_error_init=1;
-		}
-	}
-
-static void ERR_CSWIFT_error(int function, int reason, char *file, int line)
-	{
-	if (CSWIFT_lib_error_code == 0)
-		CSWIFT_lib_error_code=ERR_get_next_error_library();
-	ERR_PUT_error(CSWIFT_lib_error_code,function,reason,file,line);
-	}
diff --git a/crypto/openssl/crypto/engine/hw_cswift_err.h b/crypto/openssl/crypto/engine/hw_cswift_err.h
deleted file mode 100644
index 7120c3216fb8..000000000000
--- a/crypto/openssl/crypto/engine/hw_cswift_err.h
+++ /dev/null
@@ -1,93 +0,0 @@
-/* ====================================================================
- * Copyright (c) 2001 The OpenSSL Project.  All rights reserved.
- *
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions
- * are met:
- *
- * 1. Redistributions of source code must retain the above copyright
- *    notice, this list of conditions and the following disclaimer. 
- *
- * 2. Redistributions in binary form must reproduce the above copyright
- *    notice, this list of conditions and the following disclaimer in
- *    the documentation and/or other materials provided with the
- *    distribution.
- *
- * 3. All advertising materials mentioning features or use of this
- *    software must display the following acknowledgment:
- *    "This product includes software developed by the OpenSSL Project
- *    for use in the OpenSSL Toolkit. (http://www.openssl.org/)"
- *
- * 4. The names "OpenSSL Toolkit" and "OpenSSL Project" must not be used to
- *    endorse or promote products derived from this software without
- *    prior written permission. For written permission, please contact
- *    openssl-core@openssl.org.
- *
- * 5. Products derived from this software may not be called "OpenSSL"
- *    nor may "OpenSSL" appear in their names without prior written
- *    permission of the OpenSSL Project.
- *
- * 6. Redistributions of any form whatsoever must retain the following
- *    acknowledgment:
- *    "This product includes software developed by the OpenSSL Project
- *    for use in the OpenSSL Toolkit (http://www.openssl.org/)"
- *
- * THIS SOFTWARE IS PROVIDED BY THE OpenSSL PROJECT ``AS IS'' AND ANY
- * EXPRESSED OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
- * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR
- * PURPOSE ARE DISCLAIMED.  IN NO EVENT SHALL THE OpenSSL PROJECT OR
- * ITS CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
- * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
- * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
- * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
- * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
- * STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
- * ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED
- * OF THE POSSIBILITY OF SUCH DAMAGE.
- * ====================================================================
- *
- * This product includes cryptographic software written by Eric Young
- * (eay@cryptsoft.com).  This product includes software written by Tim
- * Hudson (tjh@cryptsoft.com).
- *
- */
-
-#ifndef HEADER_CSWIFT_ERR_H
-#define HEADER_CSWIFT_ERR_H
-
-/* BEGIN ERROR CODES */
-/* The following lines are auto generated by the script mkerr.pl. Any changes
- * made after this point may be overwritten when the script is next run.
- */
-static void ERR_load_CSWIFT_strings(void);
-static void ERR_unload_CSWIFT_strings(void);
-static void ERR_CSWIFT_error(int function, int reason, char *file, int line);
-#define CSWIFTerr(f,r) ERR_CSWIFT_error((f),(r),__FILE__,__LINE__)
-
-/* Error codes for the CSWIFT functions. */
-
-/* Function codes. */
-#define CSWIFT_F_CSWIFT_CTRL				 100
-#define CSWIFT_F_CSWIFT_DSA_SIGN			 101
-#define CSWIFT_F_CSWIFT_DSA_VERIFY			 102
-#define CSWIFT_F_CSWIFT_FINISH				 103
-#define CSWIFT_F_CSWIFT_INIT				 104
-#define CSWIFT_F_CSWIFT_MOD_EXP				 105
-#define CSWIFT_F_CSWIFT_MOD_EXP_CRT			 106
-#define CSWIFT_F_CSWIFT_RSA_MOD_EXP			 107
-
-/* Reason codes. */
-#define CSWIFT_R_ALREADY_LOADED				 100
-#define CSWIFT_R_BAD_KEY_SIZE				 101
-#define CSWIFT_R_BN_CTX_FULL				 102
-#define CSWIFT_R_BN_EXPAND_FAIL				 103
-#define CSWIFT_R_CTRL_COMMAND_NOT_IMPLEMENTED		 104
-#define CSWIFT_R_MISSING_KEY_COMPONENTS			 105
-#define CSWIFT_R_NOT_LOADED				 106
-#define CSWIFT_R_REQUEST_FAILED				 107
-#define CSWIFT_R_UNIT_FAILURE				 108
-
-#ifdef  __cplusplus
-}
-#endif
-#endif
diff --git a/crypto/openssl/crypto/engine/hw_ncipher.c b/crypto/openssl/crypto/engine/hw_ncipher.c
deleted file mode 100644
index 0d1c6b8df0ef..000000000000
--- a/crypto/openssl/crypto/engine/hw_ncipher.c
+++ /dev/null
@@ -1,1388 +0,0 @@
-/* crypto/engine/hw_ncipher.c -*- mode: C; c-file-style: "eay" -*- */
-/* Written by Richard Levitte (richard@levitte.org), Geoff Thorpe
- * (geoff@geoffthorpe.net) and Dr Stephen N Henson (shenson@bigfoot.com)
- * for the OpenSSL project 2000.
- */
-/* ====================================================================
- * Copyright (c) 1999-2001 The OpenSSL Project.  All rights reserved.
- *
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions
- * are met:
- *
- * 1. Redistributions of source code must retain the above copyright
- *    notice, this list of conditions and the following disclaimer. 
- *
- * 2. Redistributions in binary form must reproduce the above copyright
- *    notice, this list of conditions and the following disclaimer in
- *    the documentation and/or other materials provided with the
- *    distribution.
- *
- * 3. All advertising materials mentioning features or use of this
- *    software must display the following acknowledgment:
- *    "This product includes software developed by the OpenSSL Project
- *    for use in the OpenSSL Toolkit. (http://www.OpenSSL.org/)"
- *
- * 4. The names "OpenSSL Toolkit" and "OpenSSL Project" must not be used to
- *    endorse or promote products derived from this software without
- *    prior written permission. For written permission, please contact
- *    licensing@OpenSSL.org.
- *
- * 5. Products derived from this software may not be called "OpenSSL"
- *    nor may "OpenSSL" appear in their names without prior written
- *    permission of the OpenSSL Project.
- *
- * 6. Redistributions of any form whatsoever must retain the following
- *    acknowledgment:
- *    "This product includes software developed by the OpenSSL Project
- *    for use in the OpenSSL Toolkit (http://www.OpenSSL.org/)"
- *
- * THIS SOFTWARE IS PROVIDED BY THE OpenSSL PROJECT ``AS IS'' AND ANY
- * EXPRESSED OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
- * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR
- * PURPOSE ARE DISCLAIMED.  IN NO EVENT SHALL THE OpenSSL PROJECT OR
- * ITS CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
- * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
- * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
- * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
- * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
- * STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
- * ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED
- * OF THE POSSIBILITY OF SUCH DAMAGE.
- * ====================================================================
- *
- * This product includes cryptographic software written by Eric Young
- * (eay@cryptsoft.com).  This product includes software written by Tim
- * Hudson (tjh@cryptsoft.com).
- *
- */
-
-#include <stdio.h>
-#include <string.h>
-#include "cryptlib.h"
-#include <openssl/crypto.h>
-#include <openssl/pem.h>
-#include <openssl/dso.h>
-#include <openssl/engine.h>
-#include <openssl/ui.h>
-
-#ifndef OPENSSL_NO_HW
-#ifndef OPENSSL_NO_HW_NCIPHER
-
-/* Attribution notice: nCipher have said several times that it's OK for
- * us to implement a general interface to their boxes, and recently declared
- * their HWCryptoHook to be public, and therefore available for us to use.
- * Thanks, nCipher.
- *
- * The hwcryptohook.h included here is from May 2000.
- * [Richard Levitte]
- */
-#ifdef FLAT_INC
-#include "hwcryptohook.h"
-#else
-#include "vendor_defns/hwcryptohook.h"
-#endif
-
-#define HWCRHK_LIB_NAME "hwcrhk engine"
-#include "hw_ncipher_err.c"
-
-static int hwcrhk_destroy(ENGINE *e);
-static int hwcrhk_init(ENGINE *e);
-static int hwcrhk_finish(ENGINE *e);
-static int hwcrhk_ctrl(ENGINE *e, int cmd, long i, void *p, void (*f)()); 
-
-/* Functions to handle mutexes if have dynamic locks */
-static int hwcrhk_mutex_init(HWCryptoHook_Mutex*, HWCryptoHook_CallerContext*);
-static int hwcrhk_mutex_lock(HWCryptoHook_Mutex*);
-static void hwcrhk_mutex_unlock(HWCryptoHook_Mutex*);
-static void hwcrhk_mutex_destroy(HWCryptoHook_Mutex*);
-#if 1 /* This is a HACK which will disappear in 0.9.8 */
-/* Functions to handle mutexes if only have static locks */
-static int hwcrhk_static_mutex_init(HWCryptoHook_Mutex *m,
-                                    HWCryptoHook_CallerContext *c);
-static int hwcrhk_static_mutex_lock(HWCryptoHook_Mutex *m);
-static void hwcrhk_static_mutex_unlock(HWCryptoHook_Mutex *m);
-static void hwcrhk_static_mutex_destroy(HWCryptoHook_Mutex *m);
-#endif
-
-/* BIGNUM stuff */
-static int hwcrhk_mod_exp(BIGNUM *r, const BIGNUM *a, const BIGNUM *p,
-		const BIGNUM *m, BN_CTX *ctx);
-
-#ifndef OPENSSL_NO_RSA
-/* RSA stuff */
-static int hwcrhk_rsa_mod_exp(BIGNUM *r, const BIGNUM *I, RSA *rsa);
-#endif
-/* This function is aliased to mod_exp (with the mont stuff dropped). */
-static int hwcrhk_mod_exp_mont(BIGNUM *r, const BIGNUM *a, const BIGNUM *p,
-		const BIGNUM *m, BN_CTX *ctx, BN_MONT_CTX *m_ctx);
-
-#ifndef OPENSSL_NO_DH
-/* DH stuff */
-/* This function is alised to mod_exp (with the DH and mont dropped). */
-static int hwcrhk_mod_exp_dh(const DH *dh, BIGNUM *r,
-	const BIGNUM *a, const BIGNUM *p,
-	const BIGNUM *m, BN_CTX *ctx, BN_MONT_CTX *m_ctx);
-#endif
-
-/* RAND stuff */
-static int hwcrhk_rand_bytes(unsigned char *buf, int num);
-static int hwcrhk_rand_status(void);
-
-/* KM stuff */
-static EVP_PKEY *hwcrhk_load_privkey(ENGINE *eng, const char *key_id,
-	UI_METHOD *ui_method, void *callback_data);
-static EVP_PKEY *hwcrhk_load_pubkey(ENGINE *eng, const char *key_id,
-	UI_METHOD *ui_method, void *callback_data);
-static void hwcrhk_ex_free(void *obj, void *item, CRYPTO_EX_DATA *ad,
-	int ind,long argl, void *argp);
-
-/* Interaction stuff */
-static int hwcrhk_insert_card(const char *prompt_info,
-	const char *wrong_info,
-	HWCryptoHook_PassphraseContext *ppctx,
-	HWCryptoHook_CallerContext *cactx);
-static int hwcrhk_get_pass(const char *prompt_info,
-	int *len_io, char *buf,
-	HWCryptoHook_PassphraseContext *ppctx,
-	HWCryptoHook_CallerContext *cactx);
-static void hwcrhk_log_message(void *logstr, const char *message);
-
-/* The definitions for control commands specific to this engine */
-#define HWCRHK_CMD_SO_PATH		ENGINE_CMD_BASE
-#define HWCRHK_CMD_FORK_CHECK		(ENGINE_CMD_BASE + 1)
-#define HWCRHK_CMD_THREAD_LOCKING	(ENGINE_CMD_BASE + 2)
-#define HWCRHK_CMD_SET_USER_INTERFACE   (ENGINE_CMD_BASE + 3)
-#define HWCRHK_CMD_SET_CALLBACK_DATA    (ENGINE_CMD_BASE + 4)
-static const ENGINE_CMD_DEFN hwcrhk_cmd_defns[] = {
-	{HWCRHK_CMD_SO_PATH,
-		"SO_PATH",
-		"Specifies the path to the 'hwcrhk' shared library",
-		ENGINE_CMD_FLAG_STRING},
-	{HWCRHK_CMD_FORK_CHECK,
-		"FORK_CHECK",
-		"Turns fork() checking on or off (boolean)",
-		ENGINE_CMD_FLAG_NUMERIC},
-	{HWCRHK_CMD_THREAD_LOCKING,
-		"THREAD_LOCKING",
-		"Turns thread-safe locking on or off (boolean)",
-		ENGINE_CMD_FLAG_NUMERIC},
-	{HWCRHK_CMD_SET_USER_INTERFACE,
-		"SET_USER_INTERFACE",
-		"Set the global user interface (internal)",
-		ENGINE_CMD_FLAG_INTERNAL},
-	{HWCRHK_CMD_SET_CALLBACK_DATA,
-		"SET_CALLBACK_DATA",
-		"Set the global user interface extra data (internal)",
-		ENGINE_CMD_FLAG_INTERNAL},
-	{0, NULL, NULL, 0}
-	};
-
-#ifndef OPENSSL_NO_RSA
-/* Our internal RSA_METHOD that we provide pointers to */
-static RSA_METHOD hwcrhk_rsa =
-	{
-	"nCipher RSA method",
-	NULL,
-	NULL,
-	NULL,
-	NULL,
-	hwcrhk_rsa_mod_exp,
-	hwcrhk_mod_exp_mont,
-	NULL,
-	NULL,
-	0,
-	NULL,
-	NULL,
-	NULL
-	};
-#endif
-
-#ifndef OPENSSL_NO_DH
-/* Our internal DH_METHOD that we provide pointers to */
-static DH_METHOD hwcrhk_dh =
-	{
-	"nCipher DH method",
-	NULL,
-	NULL,
-	hwcrhk_mod_exp_dh,
-	NULL,
-	NULL,
-	0,
-	NULL
-	};
-#endif
-
-static RAND_METHOD hwcrhk_rand =
-	{
-	/* "nCipher RAND method", */
-	NULL,
-	hwcrhk_rand_bytes,
-	NULL,
-	NULL,
-	hwcrhk_rand_bytes,
-	hwcrhk_rand_status,
-	};
-
-/* Constants used when creating the ENGINE */
-static const char *engine_hwcrhk_id = "chil";
-static const char *engine_hwcrhk_name = "nCipher hardware engine support";
-
-/* Internal stuff for HWCryptoHook */
-
-/* Some structures needed for proper use of thread locks */
-/* hwcryptohook.h has some typedefs that turn struct HWCryptoHook_MutexValue
-   into HWCryptoHook_Mutex */
-struct HWCryptoHook_MutexValue
-	{
-	int lockid;
-	};
-
-/* hwcryptohook.h has some typedefs that turn
-   struct HWCryptoHook_PassphraseContextValue
-   into HWCryptoHook_PassphraseContext */
-struct HWCryptoHook_PassphraseContextValue
-	{
-        UI_METHOD *ui_method;
-	void *callback_data;
-	};
-
-/* hwcryptohook.h has some typedefs that turn
-   struct HWCryptoHook_CallerContextValue
-   into HWCryptoHook_CallerContext */
-struct HWCryptoHook_CallerContextValue
-	{
-	pem_password_cb *password_callback; /* Deprecated!  Only present for
-                                               backward compatibility! */
-        UI_METHOD *ui_method;
-	void *callback_data;
-	};
-
-/* The MPI structure in HWCryptoHook is pretty compatible with OpenSSL
-   BIGNUM's, so lets define a couple of conversion macros */
-#define BN2MPI(mp, bn) \
-    {mp.size = bn->top * sizeof(BN_ULONG); mp.buf = (unsigned char *)bn->d;}
-#define MPI2BN(bn, mp) \
-    {mp.size = bn->dmax * sizeof(BN_ULONG); mp.buf = (unsigned char *)bn->d;}
-
-static BIO *logstream = NULL;
-static int disable_mutex_callbacks = 0;
-
-/* One might wonder why these are needed, since one can pass down at least
-   a UI_METHOD and a pointer to callback data to the key-loading functions.
-   The thing is that the ModExp and RSAImmed functions can load keys as well,
-   if the data they get is in a special, nCipher-defined format (hint: if you
-   look at the private exponent of the RSA data as a string, you'll see this
-   string: "nCipher KM tool key id", followed by some bytes, followed a key
-   identity string, followed by more bytes.  This happens when you use "embed"
-   keys instead of "hwcrhk" keys).  Unfortunately, those functions do not take
-   any passphrase or caller context, and our functions can't really take any
-   callback data either.  Still, the "insert_card" and "get_passphrase"
-   callbacks may be called down the line, and will need to know what user
-   interface callbacks to call, and having callback data from the application
-   may be a nice thing as well, so we need to keep track of that globally. */
-static HWCryptoHook_CallerContext password_context = { NULL, NULL, NULL };
-
-/* Stuff to pass to the HWCryptoHook library */
-static HWCryptoHook_InitInfo hwcrhk_globals = {
-	HWCryptoHook_InitFlags_SimpleForkCheck,	/* Flags */
-	&logstream,		/* logstream */
-	sizeof(BN_ULONG),	/* limbsize */
-	0,			/* mslimb first: false for BNs */
-	-1,			/* msbyte first: use native */
-	0,			/* Max mutexes, 0 = no small limit */
-	0,			/* Max simultaneous, 0 = default */
-
-	/* The next few are mutex stuff: we write wrapper functions
-	   around the OS mutex functions.  We initialise them to 0
-	   here, and change that to actual function pointers in hwcrhk_init()
-	   if dynamic locks are supported (that is, if the application
-	   programmer has made sure of setting up callbacks bafore starting
-	   this engine) *and* if disable_mutex_callbacks hasn't been set by
-	   a call to ENGINE_ctrl(ENGINE_CTRL_CHIL_NO_LOCKING). */
-	sizeof(HWCryptoHook_Mutex),
-	0,
-	0,
-	0,
-	0,
-
-	/* The next few are condvar stuff: we write wrapper functions
-	   round the OS functions.  Currently not implemented and not
-	   and absolute necessity even in threaded programs, therefore
-	   0'ed.  Will hopefully be implemented some day, since it
-	   enhances the efficiency of HWCryptoHook.  */
-	0, /* sizeof(HWCryptoHook_CondVar), */
-	0, /* hwcrhk_cv_init, */
-	0, /* hwcrhk_cv_wait, */
-	0, /* hwcrhk_cv_signal, */
-	0, /* hwcrhk_cv_broadcast, */
-	0, /* hwcrhk_cv_destroy, */
-
-	hwcrhk_get_pass,	/* pass phrase */
-	hwcrhk_insert_card,	/* insert a card */
-	hwcrhk_log_message	/* Log message */
-};
-
-
-/* Now, to our own code */
-
-/* This internal function is used by ENGINE_ncipher() and possibly by the
- * "dynamic" ENGINE support too */
-static int bind_helper(ENGINE *e)
-	{
-#ifndef OPENSSL_NO_RSA
-	const RSA_METHOD *meth1;
-#endif
-#ifndef OPENSSL_NO_DH
-	const DH_METHOD *meth2;
-#endif
-	if(!ENGINE_set_id(e, engine_hwcrhk_id) ||
-			!ENGINE_set_name(e, engine_hwcrhk_name) ||
-#ifndef OPENSSL_NO_RSA
-			!ENGINE_set_RSA(e, &hwcrhk_rsa) ||
-#endif
-#ifndef OPENSSL_NO_DH
-			!ENGINE_set_DH(e, &hwcrhk_dh) ||
-#endif
-			!ENGINE_set_RAND(e, &hwcrhk_rand) ||
-			!ENGINE_set_destroy_function(e, hwcrhk_destroy) ||
-			!ENGINE_set_init_function(e, hwcrhk_init) ||
-			!ENGINE_set_finish_function(e, hwcrhk_finish) ||
-			!ENGINE_set_ctrl_function(e, hwcrhk_ctrl) ||
-			!ENGINE_set_load_privkey_function(e, hwcrhk_load_privkey) ||
-			!ENGINE_set_load_pubkey_function(e, hwcrhk_load_pubkey) ||
-			!ENGINE_set_cmd_defns(e, hwcrhk_cmd_defns))
-		return 0;
-
-#ifndef OPENSSL_NO_RSA
-	/* We know that the "PKCS1_SSLeay()" functions hook properly
-	 * to the cswift-specific mod_exp and mod_exp_crt so we use
-	 * those functions. NB: We don't use ENGINE_openssl() or
-	 * anything "more generic" because something like the RSAref
-	 * code may not hook properly, and if you own one of these
-	 * cards then you have the right to do RSA operations on it
-	 * anyway! */ 
-	meth1 = RSA_PKCS1_SSLeay();
-	hwcrhk_rsa.rsa_pub_enc = meth1->rsa_pub_enc;
-	hwcrhk_rsa.rsa_pub_dec = meth1->rsa_pub_dec;
-	hwcrhk_rsa.rsa_priv_enc = meth1->rsa_priv_enc;
-	hwcrhk_rsa.rsa_priv_dec = meth1->rsa_priv_dec;
-#endif
-
-#ifndef OPENSSL_NO_DH
-	/* Much the same for Diffie-Hellman */
-	meth2 = DH_OpenSSL();
-	hwcrhk_dh.generate_key = meth2->generate_key;
-	hwcrhk_dh.compute_key = meth2->compute_key;
-#endif
-
-	/* Ensure the hwcrhk error handling is set up */
-	ERR_load_HWCRHK_strings();
-	return 1;
-	}
-
-#ifndef ENGINE_DYNAMIC_SUPPORT
-static ENGINE *engine_ncipher(void)
-	{
-	ENGINE *ret = ENGINE_new();
-	if(!ret)
-		return NULL;
-	if(!bind_helper(ret))
-		{
-		ENGINE_free(ret);
-		return NULL;
-		}
-	return ret;
-	}
-
-void ENGINE_load_chil(void)
-	{
-	/* Copied from eng_[openssl|dyn].c */
-	ENGINE *toadd = engine_ncipher();
-	if(!toadd) return;
-	ENGINE_add(toadd);
-	ENGINE_free(toadd);
-	ERR_clear_error();
-	}
-#endif
-
-/* This is a process-global DSO handle used for loading and unloading
- * the HWCryptoHook library. NB: This is only set (or unset) during an
- * init() or finish() call (reference counts permitting) and they're
- * operating with global locks, so this should be thread-safe
- * implicitly. */
-static DSO *hwcrhk_dso = NULL;
-static HWCryptoHook_ContextHandle hwcrhk_context = 0;
-#ifndef OPENSSL_NO_RSA
-static int hndidx_rsa = -1;    /* Index for KM handle.  Not really used yet. */
-#endif
-
-/* These are the function pointers that are (un)set when the library has
- * successfully (un)loaded. */
-static HWCryptoHook_Init_t *p_hwcrhk_Init = NULL;
-static HWCryptoHook_Finish_t *p_hwcrhk_Finish = NULL;
-static HWCryptoHook_ModExp_t *p_hwcrhk_ModExp = NULL;
-#ifndef OPENSSL_NO_RSA
-static HWCryptoHook_RSA_t *p_hwcrhk_RSA = NULL;
-#endif
-static HWCryptoHook_RandomBytes_t *p_hwcrhk_RandomBytes = NULL;
-#ifndef OPENSSL_NO_RSA
-static HWCryptoHook_RSALoadKey_t *p_hwcrhk_RSALoadKey = NULL;
-static HWCryptoHook_RSAGetPublicKey_t *p_hwcrhk_RSAGetPublicKey = NULL;
-static HWCryptoHook_RSAUnloadKey_t *p_hwcrhk_RSAUnloadKey = NULL;
-#endif
-static HWCryptoHook_ModExpCRT_t *p_hwcrhk_ModExpCRT = NULL;
-
-/* Used in the DSO operations. */
-static const char *HWCRHK_LIBNAME = NULL;
-static void free_HWCRHK_LIBNAME(void)
-	{
-	if(HWCRHK_LIBNAME)
-		OPENSSL_free((void*)HWCRHK_LIBNAME);
-	HWCRHK_LIBNAME = NULL;
-	}
-static const char *get_HWCRHK_LIBNAME(void)
-	{
-	if(HWCRHK_LIBNAME)
-		return HWCRHK_LIBNAME;
-	return "nfhwcrhk";
-	}
-static long set_HWCRHK_LIBNAME(const char *name)
-	{
-	free_HWCRHK_LIBNAME();
-	return (((HWCRHK_LIBNAME = BUF_strdup(name)) != NULL) ? 1 : 0);
-	}
-static const char *n_hwcrhk_Init = "HWCryptoHook_Init";
-static const char *n_hwcrhk_Finish = "HWCryptoHook_Finish";
-static const char *n_hwcrhk_ModExp = "HWCryptoHook_ModExp";
-#ifndef OPENSSL_NO_RSA
-static const char *n_hwcrhk_RSA = "HWCryptoHook_RSA";
-#endif
-static const char *n_hwcrhk_RandomBytes = "HWCryptoHook_RandomBytes";
-#ifndef OPENSSL_NO_RSA
-static const char *n_hwcrhk_RSALoadKey = "HWCryptoHook_RSALoadKey";
-static const char *n_hwcrhk_RSAGetPublicKey = "HWCryptoHook_RSAGetPublicKey";
-static const char *n_hwcrhk_RSAUnloadKey = "HWCryptoHook_RSAUnloadKey";
-#endif
-static const char *n_hwcrhk_ModExpCRT = "HWCryptoHook_ModExpCRT";
-
-/* HWCryptoHook library functions and mechanics - these are used by the
- * higher-level functions further down. NB: As and where there's no
- * error checking, take a look lower down where these functions are
- * called, the checking and error handling is probably down there. */
-
-/* utility function to obtain a context */
-static int get_context(HWCryptoHook_ContextHandle *hac,
-        HWCryptoHook_CallerContext *cac)
-	{
-	char tempbuf[1024];
-	HWCryptoHook_ErrMsgBuf rmsg;
-
-	rmsg.buf = tempbuf;
-	rmsg.size = sizeof(tempbuf);
-
-        *hac = p_hwcrhk_Init(&hwcrhk_globals, sizeof(hwcrhk_globals), &rmsg,
-		cac);
-	if (!*hac)
-                return 0;
-        return 1;
-	}
- 
-/* similarly to release one. */
-static void release_context(HWCryptoHook_ContextHandle hac)
-	{
-	p_hwcrhk_Finish(hac);
-	}
-
-/* Destructor (complements the "ENGINE_ncipher()" constructor) */
-static int hwcrhk_destroy(ENGINE *e)
-	{
-	free_HWCRHK_LIBNAME();
-	ERR_unload_HWCRHK_strings();
-	return 1;
-	}
-
-/* (de)initialisation functions. */
-static int hwcrhk_init(ENGINE *e)
-	{
-	HWCryptoHook_Init_t *p1;
-	HWCryptoHook_Finish_t *p2;
-	HWCryptoHook_ModExp_t *p3;
-#ifndef OPENSSL_NO_RSA
-	HWCryptoHook_RSA_t *p4;
-	HWCryptoHook_RSALoadKey_t *p5;
-	HWCryptoHook_RSAGetPublicKey_t *p6;
-	HWCryptoHook_RSAUnloadKey_t *p7;
-#endif
-	HWCryptoHook_RandomBytes_t *p8;
-	HWCryptoHook_ModExpCRT_t *p9;
-
-	if(hwcrhk_dso != NULL)
-		{
-		HWCRHKerr(HWCRHK_F_HWCRHK_INIT,HWCRHK_R_ALREADY_LOADED);
-		goto err;
-		}
-	/* Attempt to load libnfhwcrhk.so/nfhwcrhk.dll/whatever. */
-	hwcrhk_dso = DSO_load(NULL, get_HWCRHK_LIBNAME(), NULL, 0);
-	if(hwcrhk_dso == NULL)
-		{
-		HWCRHKerr(HWCRHK_F_HWCRHK_INIT,HWCRHK_R_DSO_FAILURE);
-		goto err;
-		}
-	if(!(p1 = (HWCryptoHook_Init_t *)
-			DSO_bind_func(hwcrhk_dso, n_hwcrhk_Init)) ||
-		!(p2 = (HWCryptoHook_Finish_t *)
-			DSO_bind_func(hwcrhk_dso, n_hwcrhk_Finish)) ||
-		!(p3 = (HWCryptoHook_ModExp_t *)
-			DSO_bind_func(hwcrhk_dso, n_hwcrhk_ModExp)) ||
-#ifndef OPENSSL_NO_RSA
-		!(p4 = (HWCryptoHook_RSA_t *)
-			DSO_bind_func(hwcrhk_dso, n_hwcrhk_RSA)) ||
-		!(p5 = (HWCryptoHook_RSALoadKey_t *)
-			DSO_bind_func(hwcrhk_dso, n_hwcrhk_RSALoadKey)) ||
-		!(p6 = (HWCryptoHook_RSAGetPublicKey_t *)
-			DSO_bind_func(hwcrhk_dso, n_hwcrhk_RSAGetPublicKey)) ||
-		!(p7 = (HWCryptoHook_RSAUnloadKey_t *)
-			DSO_bind_func(hwcrhk_dso, n_hwcrhk_RSAUnloadKey)) ||
-#endif
-		!(p8 = (HWCryptoHook_RandomBytes_t *)
-			DSO_bind_func(hwcrhk_dso, n_hwcrhk_RandomBytes)) ||
-		!(p9 = (HWCryptoHook_ModExpCRT_t *)
-			DSO_bind_func(hwcrhk_dso, n_hwcrhk_ModExpCRT)))
-		{
-		HWCRHKerr(HWCRHK_F_HWCRHK_INIT,HWCRHK_R_DSO_FAILURE);
-		goto err;
-		}
-	/* Copy the pointers */
-	p_hwcrhk_Init = p1;
-	p_hwcrhk_Finish = p2;
-	p_hwcrhk_ModExp = p3;
-#ifndef OPENSSL_NO_RSA
-	p_hwcrhk_RSA = p4;
-	p_hwcrhk_RSALoadKey = p5;
-	p_hwcrhk_RSAGetPublicKey = p6;
-	p_hwcrhk_RSAUnloadKey = p7;
-#endif
-	p_hwcrhk_RandomBytes = p8;
-	p_hwcrhk_ModExpCRT = p9;
-
-	/* Check if the application decided to support dynamic locks,
-	   and if it does, use them. */
-	if (disable_mutex_callbacks == 0)
-		{
-		if (CRYPTO_get_dynlock_create_callback() != NULL &&
-			CRYPTO_get_dynlock_lock_callback() != NULL &&
-			CRYPTO_get_dynlock_destroy_callback() != NULL)
-			{
-			hwcrhk_globals.mutex_init = hwcrhk_mutex_init;
-			hwcrhk_globals.mutex_acquire = hwcrhk_mutex_lock;
-			hwcrhk_globals.mutex_release = hwcrhk_mutex_unlock;
-			hwcrhk_globals.mutex_destroy = hwcrhk_mutex_destroy;
-			}
-		else if (CRYPTO_get_locking_callback() != NULL)
-			{
-			HWCRHKerr(HWCRHK_F_HWCRHK_INIT,HWCRHK_R_DYNAMIC_LOCKING_MISSING);
-			ERR_add_error_data(1,"You HAVE to add dynamic locking callbacks via CRYPTO_set_dynlock_{create,lock,destroy}_callback()");
-#if 1 /* This is a HACK which will disappear in 0.9.8 */
-			hwcrhk_globals.maxmutexes    = 1; /* Only have one lock */
-			hwcrhk_globals.mutex_init    = hwcrhk_static_mutex_init;
-			hwcrhk_globals.mutex_acquire = hwcrhk_static_mutex_lock;
-			hwcrhk_globals.mutex_release = hwcrhk_static_mutex_unlock;
-			hwcrhk_globals.mutex_destroy = hwcrhk_static_mutex_destroy;
-#else
-			goto err;
-#endif
-			}
-		}
-
-	/* Try and get a context - if not, we may have a DSO but no
-	 * accelerator! */
-	if(!get_context(&hwcrhk_context, &password_context))
-		{
-		HWCRHKerr(HWCRHK_F_HWCRHK_INIT,HWCRHK_R_UNIT_FAILURE);
-		goto err;
-		}
-	/* Everything's fine. */
-#ifndef OPENSSL_NO_RSA
-	if (hndidx_rsa == -1)
-		hndidx_rsa = RSA_get_ex_new_index(0,
-			"nFast HWCryptoHook RSA key handle",
-			NULL, NULL, hwcrhk_ex_free);
-#endif
-	return 1;
-err:
-	if(hwcrhk_dso)
-		DSO_free(hwcrhk_dso);
-	hwcrhk_dso = NULL;
-	p_hwcrhk_Init = NULL;
-	p_hwcrhk_Finish = NULL;
-	p_hwcrhk_ModExp = NULL;
-#ifndef OPENSSL_NO_RSA
-	p_hwcrhk_RSA = NULL;
-	p_hwcrhk_RSALoadKey = NULL;
-	p_hwcrhk_RSAGetPublicKey = NULL;
-	p_hwcrhk_RSAUnloadKey = NULL;
-#endif
-	p_hwcrhk_ModExpCRT = NULL;
-	p_hwcrhk_RandomBytes = NULL;
-	return 0;
-	}
-
-static int hwcrhk_finish(ENGINE *e)
-	{
-	int to_return = 1;
-	free_HWCRHK_LIBNAME();
-	if(hwcrhk_dso == NULL)
-		{
-		HWCRHKerr(HWCRHK_F_HWCRHK_FINISH,HWCRHK_R_NOT_LOADED);
-		to_return = 0;
-		goto err;
-		}
-	release_context(hwcrhk_context);
-	if(!DSO_free(hwcrhk_dso))
-		{
-		HWCRHKerr(HWCRHK_F_HWCRHK_FINISH,HWCRHK_R_DSO_FAILURE);
-		to_return = 0;
-		goto err;
-		}
- err:
-	if (logstream)
-		BIO_free(logstream);
-	hwcrhk_dso = NULL;
-	p_hwcrhk_Init = NULL;
-	p_hwcrhk_Finish = NULL;
-	p_hwcrhk_ModExp = NULL;
-#ifndef OPENSSL_NO_RSA
-	p_hwcrhk_RSA = NULL;
-	p_hwcrhk_RSALoadKey = NULL;
-	p_hwcrhk_RSAGetPublicKey = NULL;
-	p_hwcrhk_RSAUnloadKey = NULL;
-#endif
-	p_hwcrhk_ModExpCRT = NULL;
-	p_hwcrhk_RandomBytes = NULL;
-	return to_return;
-	}
-
-static int hwcrhk_ctrl(ENGINE *e, int cmd, long i, void *p, void (*f)())
-	{
-	int to_return = 1;
-
-	switch(cmd)
-		{
-	case HWCRHK_CMD_SO_PATH:
-		if(hwcrhk_dso)
-			{
-			HWCRHKerr(HWCRHK_F_HWCRHK_CTRL,HWCRHK_R_ALREADY_LOADED);
-			return 0;
-			}
-		if(p == NULL)
-			{
-			HWCRHKerr(HWCRHK_F_HWCRHK_CTRL,ERR_R_PASSED_NULL_PARAMETER);
-			return 0;
-			}
-		return set_HWCRHK_LIBNAME((const char *)p);
-	case ENGINE_CTRL_SET_LOGSTREAM:
-		{
-		BIO *bio = (BIO *)p;
-
-		CRYPTO_w_lock(CRYPTO_LOCK_ENGINE);
-		if (logstream)
-			{
-			BIO_free(logstream);
-			logstream = NULL;
-			}
-		if (CRYPTO_add(&bio->references,1,CRYPTO_LOCK_BIO) > 1)
-			logstream = bio;
-		else
-			HWCRHKerr(HWCRHK_F_HWCRHK_CTRL,HWCRHK_R_BIO_WAS_FREED);
-		}
-		CRYPTO_w_unlock(CRYPTO_LOCK_ENGINE);
-		break;
-	case ENGINE_CTRL_SET_PASSWORD_CALLBACK:
-		CRYPTO_w_lock(CRYPTO_LOCK_ENGINE);
-		password_context.password_callback = (pem_password_cb *)f;
-		CRYPTO_w_unlock(CRYPTO_LOCK_ENGINE);
-		break;
-	case ENGINE_CTRL_SET_USER_INTERFACE:
-	case HWCRHK_CMD_SET_USER_INTERFACE:
-		CRYPTO_w_lock(CRYPTO_LOCK_ENGINE);
-		password_context.ui_method = (UI_METHOD *)p;
-		CRYPTO_w_unlock(CRYPTO_LOCK_ENGINE);
-		break;
-	case ENGINE_CTRL_SET_CALLBACK_DATA:
-	case HWCRHK_CMD_SET_CALLBACK_DATA:
-		CRYPTO_w_lock(CRYPTO_LOCK_ENGINE);
-		password_context.callback_data = p;
-		CRYPTO_w_unlock(CRYPTO_LOCK_ENGINE);
-		break;
-	/* this enables or disables the "SimpleForkCheck" flag used in the
-	 * initialisation structure. */
-	case ENGINE_CTRL_CHIL_SET_FORKCHECK:
-	case HWCRHK_CMD_FORK_CHECK:
-		CRYPTO_w_lock(CRYPTO_LOCK_ENGINE);
-		if(i)
-			hwcrhk_globals.flags |=
-				HWCryptoHook_InitFlags_SimpleForkCheck;
-		else
-			hwcrhk_globals.flags &=
-				~HWCryptoHook_InitFlags_SimpleForkCheck;
-		CRYPTO_w_unlock(CRYPTO_LOCK_ENGINE);
-		break;
-	/* This will prevent the initialisation function from "installing"
-	 * the mutex-handling callbacks, even if they are available from
-	 * within the library (or were provided to the library from the
-	 * calling application). This is to remove any baggage for
-	 * applications not using multithreading. */
-	case ENGINE_CTRL_CHIL_NO_LOCKING:
-		CRYPTO_w_lock(CRYPTO_LOCK_ENGINE);
-		disable_mutex_callbacks = 1;
-		CRYPTO_w_unlock(CRYPTO_LOCK_ENGINE);
-		break;
-	case HWCRHK_CMD_THREAD_LOCKING:
-		CRYPTO_w_lock(CRYPTO_LOCK_ENGINE);
-		disable_mutex_callbacks = ((i == 0) ? 0 : 1);
-		CRYPTO_w_unlock(CRYPTO_LOCK_ENGINE);
-		break;
-
-	/* The command isn't understood by this engine */
-	default:
-		HWCRHKerr(HWCRHK_F_HWCRHK_CTRL,
-			HWCRHK_R_CTRL_COMMAND_NOT_IMPLEMENTED);
-		to_return = 0;
-		break;
-		}
-
-	return to_return;
-	}
-
-static EVP_PKEY *hwcrhk_load_privkey(ENGINE *eng, const char *key_id,
-	UI_METHOD *ui_method, void *callback_data)
-	{
-#ifndef OPENSSL_NO_RSA
-	RSA *rtmp = NULL;
-#endif
-	EVP_PKEY *res = NULL;
-#ifndef OPENSSL_NO_RSA
-	HWCryptoHook_MPI e, n;
-	HWCryptoHook_RSAKeyHandle *hptr;
-#endif
-#if !defined(OPENSSL_NO_RSA)
-	char tempbuf[1024];
-	HWCryptoHook_ErrMsgBuf rmsg;
-#endif
-	HWCryptoHook_PassphraseContext ppctx;
-
-#if !defined(OPENSSL_NO_RSA)
-	rmsg.buf = tempbuf;
-	rmsg.size = sizeof(tempbuf);
-#endif
-
-	if(!hwcrhk_context)
-		{
-		HWCRHKerr(HWCRHK_F_HWCRHK_LOAD_PRIVKEY,
-			HWCRHK_R_NOT_INITIALISED);
-		goto err;
-		}
-#ifndef OPENSSL_NO_RSA
-	hptr = OPENSSL_malloc(sizeof(HWCryptoHook_RSAKeyHandle));
-	if (!hptr)
-		{
-		HWCRHKerr(HWCRHK_F_HWCRHK_LOAD_PRIVKEY,
-			ERR_R_MALLOC_FAILURE);
-		goto err;
-		}
-        ppctx.ui_method = ui_method;
-	ppctx.callback_data = callback_data;
-	if (p_hwcrhk_RSALoadKey(hwcrhk_context, key_id, hptr,
-		&rmsg, &ppctx))
-		{
-		HWCRHKerr(HWCRHK_F_HWCRHK_LOAD_PRIVKEY,
-			HWCRHK_R_CHIL_ERROR);
-		ERR_add_error_data(1,rmsg.buf);
-		goto err;
-		}
-	if (!*hptr)
-		{
-		HWCRHKerr(HWCRHK_F_HWCRHK_LOAD_PRIVKEY,
-			HWCRHK_R_NO_KEY);
-		goto err;
-		}
-#endif
-#ifndef OPENSSL_NO_RSA
-	rtmp = RSA_new_method(eng);
-	RSA_set_ex_data(rtmp, hndidx_rsa, (char *)hptr);
-	rtmp->e = BN_new();
-	rtmp->n = BN_new();
-	rtmp->flags |= RSA_FLAG_EXT_PKEY;
-	MPI2BN(rtmp->e, e);
-	MPI2BN(rtmp->n, n);
-	if (p_hwcrhk_RSAGetPublicKey(*hptr, &n, &e, &rmsg)
-		!= HWCRYPTOHOOK_ERROR_MPISIZE)
-		{
-		HWCRHKerr(HWCRHK_F_HWCRHK_LOAD_PUBKEY,HWCRHK_R_CHIL_ERROR);
-		ERR_add_error_data(1,rmsg.buf);
-		goto err;
-		}
-
-	bn_expand2(rtmp->e, e.size/sizeof(BN_ULONG));
-	bn_expand2(rtmp->n, n.size/sizeof(BN_ULONG));
-	MPI2BN(rtmp->e, e);
-	MPI2BN(rtmp->n, n);
-
-	if (p_hwcrhk_RSAGetPublicKey(*hptr, &n, &e, &rmsg))
-		{
-		HWCRHKerr(HWCRHK_F_HWCRHK_LOAD_PUBKEY,
-			HWCRHK_R_CHIL_ERROR);
-		ERR_add_error_data(1,rmsg.buf);
-		goto err;
-		}
-	rtmp->e->top = e.size / sizeof(BN_ULONG);
-	bn_fix_top(rtmp->e);
-	rtmp->n->top = n.size / sizeof(BN_ULONG);
-	bn_fix_top(rtmp->n);
-
-	res = EVP_PKEY_new();
-	EVP_PKEY_assign_RSA(res, rtmp);
-#endif
-
-        if (!res)
-                HWCRHKerr(HWCRHK_F_HWCRHK_LOAD_PUBKEY,
-                        HWCRHK_R_PRIVATE_KEY_ALGORITHMS_DISABLED);
-
-	return res;
- err:
-	if (res)
-		EVP_PKEY_free(res);
-#ifndef OPENSSL_NO_RSA
-	if (rtmp)
-		RSA_free(rtmp);
-#endif
-	return NULL;
-	}
-
-static EVP_PKEY *hwcrhk_load_pubkey(ENGINE *eng, const char *key_id,
-	UI_METHOD *ui_method, void *callback_data)
-	{
-	EVP_PKEY *res = NULL;
-
-#ifndef OPENSSL_NO_RSA
-        res = hwcrhk_load_privkey(eng, key_id,
-                ui_method, callback_data);
-#endif
-
-	if (res)
-		switch(res->type)
-			{
-#ifndef OPENSSL_NO_RSA
-		case EVP_PKEY_RSA:
-			{
-			RSA *rsa = NULL;
-
-			CRYPTO_w_lock(CRYPTO_LOCK_EVP_PKEY);
-			rsa = res->pkey.rsa;
-			res->pkey.rsa = RSA_new();
-			res->pkey.rsa->n = rsa->n;
-			res->pkey.rsa->e = rsa->e;
-			rsa->n = NULL;
-			rsa->e = NULL;
-			CRYPTO_w_unlock(CRYPTO_LOCK_EVP_PKEY);
-			RSA_free(rsa);
-			}
-			break;
-#endif
-		default:
-			HWCRHKerr(HWCRHK_F_HWCRHK_LOAD_PUBKEY,
-				HWCRHK_R_CTRL_COMMAND_NOT_IMPLEMENTED);
-			goto err;
-			}
-
-	return res;
- err:
-	if (res)
-		EVP_PKEY_free(res);
-	return NULL;
-	}
-
-/* A little mod_exp */
-static int hwcrhk_mod_exp(BIGNUM *r, const BIGNUM *a, const BIGNUM *p,
-			const BIGNUM *m, BN_CTX *ctx)
-	{
-	char tempbuf[1024];
-	HWCryptoHook_ErrMsgBuf rmsg;
-	/* Since HWCryptoHook_MPI is pretty compatible with BIGNUM's,
-	   we use them directly, plus a little macro magic.  We only
-	   thing we need to make sure of is that enough space is allocated. */
-	HWCryptoHook_MPI m_a, m_p, m_n, m_r;
-	int to_return, ret;
- 
-	to_return = 0; /* expect failure */
-	rmsg.buf = tempbuf;
-	rmsg.size = sizeof(tempbuf);
-
-	if(!hwcrhk_context)
-		{
-		HWCRHKerr(HWCRHK_F_HWCRHK_MOD_EXP,HWCRHK_R_NOT_INITIALISED);
-		goto err;
-		}
-	/* Prepare the params */
-	bn_expand2(r, m->top);	/* Check for error !! */
-	BN2MPI(m_a, a);
-	BN2MPI(m_p, p);
-	BN2MPI(m_n, m);
-	MPI2BN(r, m_r);
-
-	/* Perform the operation */
-	ret = p_hwcrhk_ModExp(hwcrhk_context, m_a, m_p, m_n, &m_r, &rmsg);
-
-	/* Convert the response */
-	r->top = m_r.size / sizeof(BN_ULONG);
-	bn_fix_top(r);
-
-	if (ret < 0)
-		{
-		/* FIXME: When this error is returned, HWCryptoHook is
-		   telling us that falling back to software computation
-		   might be a good thing. */
-		if(ret == HWCRYPTOHOOK_ERROR_FALLBACK)
-			{
-			HWCRHKerr(HWCRHK_F_HWCRHK_MOD_EXP,HWCRHK_R_REQUEST_FALLBACK);
-			}
-		else
-			{
-			HWCRHKerr(HWCRHK_F_HWCRHK_MOD_EXP,HWCRHK_R_REQUEST_FAILED);
-			}
-		ERR_add_error_data(1,rmsg.buf);
-		goto err;
-		}
-
-	to_return = 1;
-err:
-	return to_return;
-	}
-
-#ifndef OPENSSL_NO_RSA 
-static int hwcrhk_rsa_mod_exp(BIGNUM *r, const BIGNUM *I, RSA *rsa)
-	{
-	char tempbuf[1024];
-	HWCryptoHook_ErrMsgBuf rmsg;
-	HWCryptoHook_RSAKeyHandle *hptr;
-	int to_return = 0, ret;
-
-	rmsg.buf = tempbuf;
-	rmsg.size = sizeof(tempbuf);
-
-	if(!hwcrhk_context)
-		{
-		HWCRHKerr(HWCRHK_F_HWCRHK_MOD_EXP,HWCRHK_R_NOT_INITIALISED);
-		goto err;
-		}
-
-	/* This provides support for nForce keys.  Since that's opaque data
-	   all we do is provide a handle to the proper key and let HWCryptoHook
-	   take care of the rest. */
-	if ((hptr = (HWCryptoHook_RSAKeyHandle *) RSA_get_ex_data(rsa, hndidx_rsa))
-		!= NULL)
-		{
-		HWCryptoHook_MPI m_a, m_r;
-
-		if(!rsa->n)
-			{
-			HWCRHKerr(HWCRHK_F_HWCRHK_RSA_MOD_EXP,
-				HWCRHK_R_MISSING_KEY_COMPONENTS);
-			goto err;
-			}
-
-		/* Prepare the params */
-		bn_expand2(r, rsa->n->top); /* Check for error !! */
-		BN2MPI(m_a, I);
-		MPI2BN(r, m_r);
-
-		/* Perform the operation */
-		ret = p_hwcrhk_RSA(m_a, *hptr, &m_r, &rmsg);
-
-		/* Convert the response */
-		r->top = m_r.size / sizeof(BN_ULONG);
-		bn_fix_top(r);
-
-		if (ret < 0)
-			{
-			/* FIXME: When this error is returned, HWCryptoHook is
-			   telling us that falling back to software computation
-			   might be a good thing. */
-			if(ret == HWCRYPTOHOOK_ERROR_FALLBACK)
-				{
-				HWCRHKerr(HWCRHK_F_HWCRHK_RSA_MOD_EXP,
-					HWCRHK_R_REQUEST_FALLBACK);
-				}
-			else
-				{
-				HWCRHKerr(HWCRHK_F_HWCRHK_RSA_MOD_EXP,
-					HWCRHK_R_REQUEST_FAILED);
-				}
-			ERR_add_error_data(1,rmsg.buf);
-			goto err;
-			}
-		}
-	else
-		{
-		HWCryptoHook_MPI m_a, m_p, m_q, m_dmp1, m_dmq1, m_iqmp, m_r;
-
-		if(!rsa->p || !rsa->q || !rsa->dmp1 || !rsa->dmq1 || !rsa->iqmp)
-			{
-			HWCRHKerr(HWCRHK_F_HWCRHK_RSA_MOD_EXP,
-				HWCRHK_R_MISSING_KEY_COMPONENTS);
-			goto err;
-			}
-
-		/* Prepare the params */
-		bn_expand2(r, rsa->n->top); /* Check for error !! */
-		BN2MPI(m_a, I);
-		BN2MPI(m_p, rsa->p);
-		BN2MPI(m_q, rsa->q);
-		BN2MPI(m_dmp1, rsa->dmp1);
-		BN2MPI(m_dmq1, rsa->dmq1);
-		BN2MPI(m_iqmp, rsa->iqmp);
-		MPI2BN(r, m_r);
-
-		/* Perform the operation */
-		ret = p_hwcrhk_ModExpCRT(hwcrhk_context, m_a, m_p, m_q,
-			m_dmp1, m_dmq1, m_iqmp, &m_r, &rmsg);
-
-		/* Convert the response */
-		r->top = m_r.size / sizeof(BN_ULONG);
-		bn_fix_top(r);
-
-		if (ret < 0)
-			{
-			/* FIXME: When this error is returned, HWCryptoHook is
-			   telling us that falling back to software computation
-			   might be a good thing. */
-			if(ret == HWCRYPTOHOOK_ERROR_FALLBACK)
-				{
-				HWCRHKerr(HWCRHK_F_HWCRHK_RSA_MOD_EXP,
-					HWCRHK_R_REQUEST_FALLBACK);
-				}
-			else
-				{
-				HWCRHKerr(HWCRHK_F_HWCRHK_RSA_MOD_EXP,
-					HWCRHK_R_REQUEST_FAILED);
-				}
-			ERR_add_error_data(1,rmsg.buf);
-			goto err;
-			}
-		}
-	/* If we're here, we must be here with some semblance of success :-) */
-	to_return = 1;
-err:
-	return to_return;
-	}
-#endif
-
-/* This function is aliased to mod_exp (with the mont stuff dropped). */
-static int hwcrhk_mod_exp_mont(BIGNUM *r, const BIGNUM *a, const BIGNUM *p,
-		const BIGNUM *m, BN_CTX *ctx, BN_MONT_CTX *m_ctx)
-	{
-	return hwcrhk_mod_exp(r, a, p, m, ctx);
-	}
-
-#ifndef OPENSSL_NO_DH
-/* This function is aliased to mod_exp (with the dh and mont dropped). */
-static int hwcrhk_mod_exp_dh(const DH *dh, BIGNUM *r,
-		const BIGNUM *a, const BIGNUM *p,
-		const BIGNUM *m, BN_CTX *ctx, BN_MONT_CTX *m_ctx)
-	{
-	return hwcrhk_mod_exp(r, a, p, m, ctx);
-	}
-#endif
-
-/* Random bytes are good */
-static int hwcrhk_rand_bytes(unsigned char *buf, int num)
-	{
-	char tempbuf[1024];
-	HWCryptoHook_ErrMsgBuf rmsg;
-	int to_return = 0; /* assume failure */
-	int ret;
-
-	rmsg.buf = tempbuf;
-	rmsg.size = sizeof(tempbuf);
-
-	if(!hwcrhk_context)
-		{
-		HWCRHKerr(HWCRHK_F_HWCRHK_RAND_BYTES,HWCRHK_R_NOT_INITIALISED);
-		goto err;
-		}
-
-	ret = p_hwcrhk_RandomBytes(hwcrhk_context, buf, num, &rmsg);
-	if (ret < 0)
-		{
-		/* FIXME: When this error is returned, HWCryptoHook is
-		   telling us that falling back to software computation
-		   might be a good thing. */
-		if(ret == HWCRYPTOHOOK_ERROR_FALLBACK)
-			{
-			HWCRHKerr(HWCRHK_F_HWCRHK_RAND_BYTES,
-				HWCRHK_R_REQUEST_FALLBACK);
-			}
-		else
-			{
-			HWCRHKerr(HWCRHK_F_HWCRHK_RAND_BYTES,
-				HWCRHK_R_REQUEST_FAILED);
-			}
-		ERR_add_error_data(1,rmsg.buf);
-		goto err;
-		}
-	to_return = 1;
- err:
-	return to_return;
-	}
-
-static int hwcrhk_rand_status(void)
-	{
-	return 1;
-	}
-
-/* This cleans up an RSA KM key, called when ex_data is freed */
-
-static void hwcrhk_ex_free(void *obj, void *item, CRYPTO_EX_DATA *ad,
-	int ind,long argl, void *argp)
-{
-	char tempbuf[1024];
-	HWCryptoHook_ErrMsgBuf rmsg;
-#ifndef OPENSSL_NO_RSA
-	HWCryptoHook_RSAKeyHandle *hptr;
-#endif
-#if !defined(OPENSSL_NO_RSA)
-	int ret;
-#endif
-
-	rmsg.buf = tempbuf;
-	rmsg.size = sizeof(tempbuf);
-
-#ifndef OPENSSL_NO_RSA
-	hptr = (HWCryptoHook_RSAKeyHandle *) item;
-	if(hptr)
-                {
-                ret = p_hwcrhk_RSAUnloadKey(*hptr, NULL);
-                OPENSSL_free(hptr);
-                }
-#endif
-}
-
-/* Mutex calls: since the HWCryptoHook model closely follows the POSIX model
- * these just wrap the POSIX functions and add some logging.
- */
-
-static int hwcrhk_mutex_init(HWCryptoHook_Mutex* mt,
-	HWCryptoHook_CallerContext *cactx)
-	{
-	mt->lockid = CRYPTO_get_new_dynlockid();
-	if (mt->lockid == 0)
-		return 1; /* failure */
-	return 0; /* success */
-	}
-
-static int hwcrhk_mutex_lock(HWCryptoHook_Mutex *mt)
-	{
-	CRYPTO_w_lock(mt->lockid);
-	return 0;
-	}
-
-static void hwcrhk_mutex_unlock(HWCryptoHook_Mutex * mt)
-	{
-	CRYPTO_w_unlock(mt->lockid);
-	}
-
-static void hwcrhk_mutex_destroy(HWCryptoHook_Mutex *mt)
-	{
-	CRYPTO_destroy_dynlockid(mt->lockid);
-	}
-
-/* Mutex upcalls to use if the application does not support dynamic locks */
-
-static int hwcrhk_static_mutex_init(HWCryptoHook_Mutex *m,
-	HWCryptoHook_CallerContext *c)
-	{
-	return 0;
-	}
-static int hwcrhk_static_mutex_lock(HWCryptoHook_Mutex *m)
-	{
-	CRYPTO_w_lock(CRYPTO_LOCK_HWCRHK);
-	return 0;
-	}
-static void hwcrhk_static_mutex_unlock(HWCryptoHook_Mutex *m)
-	{
-	CRYPTO_w_unlock(CRYPTO_LOCK_HWCRHK);
-	}
-static void hwcrhk_static_mutex_destroy(HWCryptoHook_Mutex *m)
-	{
-	}
-
-static int hwcrhk_get_pass(const char *prompt_info,
-	int *len_io, char *buf,
-	HWCryptoHook_PassphraseContext *ppctx,
-	HWCryptoHook_CallerContext *cactx)
-	{
-	pem_password_cb *callback = NULL;
-	void *callback_data = NULL;
-        UI_METHOD *ui_method = NULL;
-
-        if (cactx)
-                {
-                if (cactx->ui_method)
-                        ui_method = cactx->ui_method;
-		if (cactx->password_callback)
-			callback = cactx->password_callback;
-		if (cactx->callback_data)
-			callback_data = cactx->callback_data;
-                }
-	if (ppctx)
-		{
-                if (ppctx->ui_method)
-                        {
-                        ui_method = ppctx->ui_method;
-                        callback = NULL;
-                        }
-		if (ppctx->callback_data)
-			callback_data = ppctx->callback_data;
-		}
-	if (callback == NULL && ui_method == NULL)
-		{
-		HWCRHKerr(HWCRHK_F_HWCRHK_GET_PASS,HWCRHK_R_NO_CALLBACK);
-		return -1;
-		}
-
-        if (ui_method)
-                {
-                UI *ui = UI_new_method(ui_method);
-                if (ui)
-                        {
-                        int ok;
-                        char *prompt = UI_construct_prompt(ui,
-                                "pass phrase", prompt_info);
-
-                        ok = UI_add_input_string(ui,prompt,
-                                UI_INPUT_FLAG_DEFAULT_PWD,
-				buf,0,(*len_io) - 1);
-                        UI_add_user_data(ui, callback_data);
-			UI_ctrl(ui, UI_CTRL_PRINT_ERRORS, 1, 0, 0);
-
-			if (ok >= 0)
-				do
-					{
-					ok=UI_process(ui);
-					}
-				while (ok < 0 && UI_ctrl(ui, UI_CTRL_IS_REDOABLE, 0, 0, 0));
-
-                        if (ok >= 0)
-                                *len_io = strlen(buf);
-
-                        UI_free(ui);
-                        OPENSSL_free(prompt);
-                        }
-                }
-        else
-                {
-                *len_io = callback(buf, *len_io, 0, callback_data);
-                }
-	if(!*len_io)
-		return -1;
-	return 0;
-	}
-
-static int hwcrhk_insert_card(const char *prompt_info,
-		      const char *wrong_info,
-		      HWCryptoHook_PassphraseContext *ppctx,
-		      HWCryptoHook_CallerContext *cactx)
-        {
-        int ok = -1;
-        UI *ui;
-	void *callback_data = NULL;
-        UI_METHOD *ui_method = NULL;
-
-        if (cactx)
-                {
-                if (cactx->ui_method)
-                        ui_method = cactx->ui_method;
-		if (cactx->callback_data)
-			callback_data = cactx->callback_data;
-                }
-	if (ppctx)
-		{
-                if (ppctx->ui_method)
-                        ui_method = ppctx->ui_method;
-		if (ppctx->callback_data)
-			callback_data = ppctx->callback_data;
-		}
-	if (ui_method == NULL)
-		{
-		HWCRHKerr(HWCRHK_F_HWCRHK_INSERT_CARD,
-			HWCRHK_R_NO_CALLBACK);
-		return -1;
-		}
-
-	ui = UI_new_method(ui_method);
-
-	if (ui)
-		{
-		char answer;
-		char buf[BUFSIZ];
-
-		if (wrong_info)
-			BIO_snprintf(buf, sizeof(buf)-1,
-				"Current card: \"%s\"\n", wrong_info);
-		ok = UI_dup_info_string(ui, buf);
-		if (ok >= 0 && prompt_info)
-			{
-			BIO_snprintf(buf, sizeof(buf)-1,
-				"Insert card \"%s\"", prompt_info);
-			ok = UI_dup_input_boolean(ui, buf,
-				"\n then hit <enter> or C<enter> to cancel\n",
-				"\r\n", "Cc", UI_INPUT_FLAG_ECHO, &answer);
-			}
-		UI_add_user_data(ui, callback_data);
-
-		if (ok >= 0)
-			ok = UI_process(ui);
-		UI_free(ui);
-
-		if (ok == -2 || (ok >= 0 && answer == 'C'))
-			ok = 1;
-		else if (ok < 0)
-			ok = -1;
-		else
-			ok = 0;
-		}
-	return ok;
-	}
-
-static void hwcrhk_log_message(void *logstr, const char *message)
-	{
-	BIO *lstream = NULL;
-
-	CRYPTO_w_lock(CRYPTO_LOCK_BIO);
-	if (logstr)
-		lstream=*(BIO **)logstr;
-	if (lstream)
-		{
-		BIO_printf(lstream, "%s\n", message);
-		}
-	CRYPTO_w_unlock(CRYPTO_LOCK_BIO);
-	}
-
-/* This stuff is needed if this ENGINE is being compiled into a self-contained
- * shared-library. */	   
-#ifdef ENGINE_DYNAMIC_SUPPORT
-static int bind_fn(ENGINE *e, const char *id)
-	{
-	if(id && (strcmp(id, engine_hwcrhk_id) != 0))
-		return 0;
-	if(!bind_helper(e))
-		return 0;
-	return 1;
-	}       
-IMPLEMENT_DYNAMIC_CHECK_FN()
-IMPLEMENT_DYNAMIC_BIND_FN(bind_fn)
-#endif /* ENGINE_DYNAMIC_SUPPORT */
-
-#endif /* !OPENSSL_NO_HW_NCIPHER */
-#endif /* !OPENSSL_NO_HW */
diff --git a/crypto/openssl/crypto/engine/hw_ncipher_err.c b/crypto/openssl/crypto/engine/hw_ncipher_err.c
deleted file mode 100644
index 5bc94581b741..000000000000
--- a/crypto/openssl/crypto/engine/hw_ncipher_err.c
+++ /dev/null
@@ -1,157 +0,0 @@
-/* hw_ncipher_err.c */
-/* ====================================================================
- * Copyright (c) 1999-2002 The OpenSSL Project.  All rights reserved.
- *
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions
- * are met:
- *
- * 1. Redistributions of source code must retain the above copyright
- *    notice, this list of conditions and the following disclaimer. 
- *
- * 2. Redistributions in binary form must reproduce the above copyright
- *    notice, this list of conditions and the following disclaimer in
- *    the documentation and/or other materials provided with the
- *    distribution.
- *
- * 3. All advertising materials mentioning features or use of this
- *    software must display the following acknowledgment:
- *    "This product includes software developed by the OpenSSL Project
- *    for use in the OpenSSL Toolkit. (http://www.OpenSSL.org/)"
- *
- * 4. The names "OpenSSL Toolkit" and "OpenSSL Project" must not be used to
- *    endorse or promote products derived from this software without
- *    prior written permission. For written permission, please contact
- *    openssl-core@OpenSSL.org.
- *
- * 5. Products derived from this software may not be called "OpenSSL"
- *    nor may "OpenSSL" appear in their names without prior written
- *    permission of the OpenSSL Project.
- *
- * 6. Redistributions of any form whatsoever must retain the following
- *    acknowledgment:
- *    "This product includes software developed by the OpenSSL Project
- *    for use in the OpenSSL Toolkit (http://www.OpenSSL.org/)"
- *
- * THIS SOFTWARE IS PROVIDED BY THE OpenSSL PROJECT ``AS IS'' AND ANY
- * EXPRESSED OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
- * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR
- * PURPOSE ARE DISCLAIMED.  IN NO EVENT SHALL THE OpenSSL PROJECT OR
- * ITS CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
- * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
- * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
- * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
- * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
- * STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
- * ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED
- * OF THE POSSIBILITY OF SUCH DAMAGE.
- * ====================================================================
- *
- * This product includes cryptographic software written by Eric Young
- * (eay@cryptsoft.com).  This product includes software written by Tim
- * Hudson (tjh@cryptsoft.com).
- *
- */
-
-/* NOTE: this file was auto generated by the mkerr.pl script: any changes
- * made to it will be overwritten when the script next updates this file,
- * only reason strings will be preserved.
- */
-
-#include <stdio.h>
-#include <openssl/err.h>
-#include "hw_ncipher_err.h"
-
-/* BEGIN ERROR CODES */
-#ifndef OPENSSL_NO_ERR
-static ERR_STRING_DATA HWCRHK_str_functs[]=
-	{
-{ERR_PACK(0,HWCRHK_F_HWCRHK_CTRL,0),	"HWCRHK_CTRL"},
-{ERR_PACK(0,HWCRHK_F_HWCRHK_FINISH,0),	"HWCRHK_FINISH"},
-{ERR_PACK(0,HWCRHK_F_HWCRHK_GET_PASS,0),	"HWCRHK_GET_PASS"},
-{ERR_PACK(0,HWCRHK_F_HWCRHK_INIT,0),	"HWCRHK_INIT"},
-{ERR_PACK(0,HWCRHK_F_HWCRHK_INSERT_CARD,0),	"HWCRHK_INSERT_CARD"},
-{ERR_PACK(0,HWCRHK_F_HWCRHK_LOAD_PRIVKEY,0),	"HWCRHK_LOAD_PRIVKEY"},
-{ERR_PACK(0,HWCRHK_F_HWCRHK_LOAD_PUBKEY,0),	"HWCRHK_LOAD_PUBKEY"},
-{ERR_PACK(0,HWCRHK_F_HWCRHK_MOD_EXP,0),	"HWCRHK_MOD_EXP"},
-{ERR_PACK(0,HWCRHK_F_HWCRHK_RAND_BYTES,0),	"HWCRHK_RAND_BYTES"},
-{ERR_PACK(0,HWCRHK_F_HWCRHK_RSA_MOD_EXP,0),	"HWCRHK_RSA_MOD_EXP"},
-{0,NULL}
-	};
-
-static ERR_STRING_DATA HWCRHK_str_reasons[]=
-	{
-{HWCRHK_R_ALREADY_LOADED                 ,"already loaded"},
-{HWCRHK_R_BIO_WAS_FREED                  ,"bio was freed"},
-{HWCRHK_R_CHIL_ERROR                     ,"chil error"},
-{HWCRHK_R_CTRL_COMMAND_NOT_IMPLEMENTED   ,"ctrl command not implemented"},
-{HWCRHK_R_DSO_FAILURE                    ,"dso failure"},
-{HWCRHK_R_DYNAMIC_LOCKING_MISSING        ,"dynamic locking missing"},
-{HWCRHK_R_MISSING_KEY_COMPONENTS         ,"missing key components"},
-{HWCRHK_R_NOT_INITIALISED                ,"not initialised"},
-{HWCRHK_R_NOT_LOADED                     ,"not loaded"},
-{HWCRHK_R_NO_CALLBACK                    ,"no callback"},
-{HWCRHK_R_NO_KEY                         ,"no key"},
-{HWCRHK_R_PRIVATE_KEY_ALGORITHMS_DISABLED,"private key algorithms disabled"},
-{HWCRHK_R_REQUEST_FAILED                 ,"request failed"},
-{HWCRHK_R_REQUEST_FALLBACK               ,"request fallback"},
-{HWCRHK_R_UNIT_FAILURE                   ,"unit failure"},
-{0,NULL}
-	};
-
-#endif
-
-#ifdef HWCRHK_LIB_NAME
-static ERR_STRING_DATA HWCRHK_lib_name[]=
-        {
-{0	,HWCRHK_LIB_NAME},
-{0,NULL}
-	};
-#endif
-
-
-static int HWCRHK_lib_error_code=0;
-static int HWCRHK_error_init=1;
-
-static void ERR_load_HWCRHK_strings(void)
-	{
-	if (HWCRHK_lib_error_code == 0)
-		HWCRHK_lib_error_code=ERR_get_next_error_library();
-
-	if (HWCRHK_error_init)
-		{
-		HWCRHK_error_init=0;
-#ifndef OPENSSL_NO_ERR
-		ERR_load_strings(HWCRHK_lib_error_code,HWCRHK_str_functs);
-		ERR_load_strings(HWCRHK_lib_error_code,HWCRHK_str_reasons);
-#endif
-
-#ifdef HWCRHK_LIB_NAME
-		HWCRHK_lib_name->error = ERR_PACK(HWCRHK_lib_error_code,0,0);
-		ERR_load_strings(0,HWCRHK_lib_name);
-#endif
-		}
-	}
-
-static void ERR_unload_HWCRHK_strings(void)
-	{
-	if (HWCRHK_error_init == 0)
-		{
-#ifndef OPENSSL_NO_ERR
-		ERR_unload_strings(HWCRHK_lib_error_code,HWCRHK_str_functs);
-		ERR_unload_strings(HWCRHK_lib_error_code,HWCRHK_str_reasons);
-#endif
-
-#ifdef HWCRHK_LIB_NAME
-		ERR_unload_strings(0,HWCRHK_lib_name);
-#endif
-		HWCRHK_error_init=1;
-		}
-	}
-
-static void ERR_HWCRHK_error(int function, int reason, char *file, int line)
-	{
-	if (HWCRHK_lib_error_code == 0)
-		HWCRHK_lib_error_code=ERR_get_next_error_library();
-	ERR_PUT_error(HWCRHK_lib_error_code,function,reason,file,line);
-	}
diff --git a/crypto/openssl/crypto/engine/hw_ncipher_err.h b/crypto/openssl/crypto/engine/hw_ncipher_err.h
deleted file mode 100644
index d232d0231984..000000000000
--- a/crypto/openssl/crypto/engine/hw_ncipher_err.h
+++ /dev/null
@@ -1,101 +0,0 @@
-/* ====================================================================
- * Copyright (c) 2001 The OpenSSL Project.  All rights reserved.
- *
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions
- * are met:
- *
- * 1. Redistributions of source code must retain the above copyright
- *    notice, this list of conditions and the following disclaimer. 
- *
- * 2. Redistributions in binary form must reproduce the above copyright
- *    notice, this list of conditions and the following disclaimer in
- *    the documentation and/or other materials provided with the
- *    distribution.
- *
- * 3. All advertising materials mentioning features or use of this
- *    software must display the following acknowledgment:
- *    "This product includes software developed by the OpenSSL Project
- *    for use in the OpenSSL Toolkit. (http://www.openssl.org/)"
- *
- * 4. The names "OpenSSL Toolkit" and "OpenSSL Project" must not be used to
- *    endorse or promote products derived from this software without
- *    prior written permission. For written permission, please contact
- *    openssl-core@openssl.org.
- *
- * 5. Products derived from this software may not be called "OpenSSL"
- *    nor may "OpenSSL" appear in their names without prior written
- *    permission of the OpenSSL Project.
- *
- * 6. Redistributions of any form whatsoever must retain the following
- *    acknowledgment:
- *    "This product includes software developed by the OpenSSL Project
- *    for use in the OpenSSL Toolkit (http://www.openssl.org/)"
- *
- * THIS SOFTWARE IS PROVIDED BY THE OpenSSL PROJECT ``AS IS'' AND ANY
- * EXPRESSED OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
- * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR
- * PURPOSE ARE DISCLAIMED.  IN NO EVENT SHALL THE OpenSSL PROJECT OR
- * ITS CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
- * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
- * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
- * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
- * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
- * STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
- * ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED
- * OF THE POSSIBILITY OF SUCH DAMAGE.
- * ====================================================================
- *
- * This product includes cryptographic software written by Eric Young
- * (eay@cryptsoft.com).  This product includes software written by Tim
- * Hudson (tjh@cryptsoft.com).
- *
- */
-
-#ifndef HEADER_HWCRHK_ERR_H
-#define HEADER_HWCRHK_ERR_H
-
-/* BEGIN ERROR CODES */
-/* The following lines are auto generated by the script mkerr.pl. Any changes
- * made after this point may be overwritten when the script is next run.
- */
-static void ERR_load_HWCRHK_strings(void);
-static void ERR_unload_HWCRHK_strings(void);
-static void ERR_HWCRHK_error(int function, int reason, char *file, int line);
-#define HWCRHKerr(f,r) ERR_HWCRHK_error((f),(r),__FILE__,__LINE__)
-
-/* Error codes for the HWCRHK functions. */
-
-/* Function codes. */
-#define HWCRHK_F_HWCRHK_CTRL				 100
-#define HWCRHK_F_HWCRHK_FINISH				 101
-#define HWCRHK_F_HWCRHK_GET_PASS			 102
-#define HWCRHK_F_HWCRHK_INIT				 103
-#define HWCRHK_F_HWCRHK_INSERT_CARD			 104
-#define HWCRHK_F_HWCRHK_LOAD_PRIVKEY			 105
-#define HWCRHK_F_HWCRHK_LOAD_PUBKEY			 106
-#define HWCRHK_F_HWCRHK_MOD_EXP				 107
-#define HWCRHK_F_HWCRHK_RAND_BYTES			 108
-#define HWCRHK_F_HWCRHK_RSA_MOD_EXP			 109
-
-/* Reason codes. */
-#define HWCRHK_R_ALREADY_LOADED				 100
-#define HWCRHK_R_BIO_WAS_FREED				 101
-#define HWCRHK_R_CHIL_ERROR				 102
-#define HWCRHK_R_CTRL_COMMAND_NOT_IMPLEMENTED		 103
-#define HWCRHK_R_DSO_FAILURE				 104
-#define HWCRHK_R_DYNAMIC_LOCKING_MISSING		 114
-#define HWCRHK_R_MISSING_KEY_COMPONENTS			 105
-#define HWCRHK_R_NOT_INITIALISED			 106
-#define HWCRHK_R_NOT_LOADED				 107
-#define HWCRHK_R_NO_CALLBACK				 108
-#define HWCRHK_R_NO_KEY					 109
-#define HWCRHK_R_PRIVATE_KEY_ALGORITHMS_DISABLED	 110
-#define HWCRHK_R_REQUEST_FAILED				 111
-#define HWCRHK_R_REQUEST_FALLBACK			 112
-#define HWCRHK_R_UNIT_FAILURE				 113
-
-#ifdef  __cplusplus
-}
-#endif
-#endif
diff --git a/crypto/openssl/crypto/engine/hw_nuron.c b/crypto/openssl/crypto/engine/hw_nuron.c
deleted file mode 100644
index fb9188bfe5be..000000000000
--- a/crypto/openssl/crypto/engine/hw_nuron.c
+++ /dev/null
@@ -1,418 +0,0 @@
-/* crypto/engine/hw_nuron.c */
-/* Written by Ben Laurie for the OpenSSL Project, leaning heavily on Geoff
- * Thorpe's Atalla implementation.
- */
-/* ====================================================================
- * Copyright (c) 2000-2001 The OpenSSL Project.  All rights reserved.
- *
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions
- * are met:
- *
- * 1. Redistributions of source code must retain the above copyright
- *    notice, this list of conditions and the following disclaimer. 
- *
- * 2. Redistributions in binary form must reproduce the above copyright
- *    notice, this list of conditions and the following disclaimer in
- *    the documentation and/or other materials provided with the
- *    distribution.
- *
- * 3. All advertising materials mentioning features or use of this
- *    software must display the following acknowledgment:
- *    "This product includes software developed by the OpenSSL Project
- *    for use in the OpenSSL Toolkit. (http://www.OpenSSL.org/)"
- *
- * 4. The names "OpenSSL Toolkit" and "OpenSSL Project" must not be used to
- *    endorse or promote products derived from this software without
- *    prior written permission. For written permission, please contact
- *    licensing@OpenSSL.org.
- *
- * 5. Products derived from this software may not be called "OpenSSL"
- *    nor may "OpenSSL" appear in their names without prior written
- *    permission of the OpenSSL Project.
- *
- * 6. Redistributions of any form whatsoever must retain the following
- *    acknowledgment:
- *    "This product includes software developed by the OpenSSL Project
- *    for use in the OpenSSL Toolkit (http://www.OpenSSL.org/)"
- *
- * THIS SOFTWARE IS PROVIDED BY THE OpenSSL PROJECT ``AS IS'' AND ANY
- * EXPRESSED OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
- * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR
- * PURPOSE ARE DISCLAIMED.  IN NO EVENT SHALL THE OpenSSL PROJECT OR
- * ITS CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
- * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
- * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
- * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
- * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
- * STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
- * ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED
- * OF THE POSSIBILITY OF SUCH DAMAGE.
- * ====================================================================
- *
- * This product includes cryptographic software written by Eric Young
- * (eay@cryptsoft.com).  This product includes software written by Tim
- * Hudson (tjh@cryptsoft.com).
- *
- */
-
-#include <stdio.h>
-#include <openssl/crypto.h>
-#include "cryptlib.h"
-#include <openssl/dso.h>
-#include <openssl/engine.h>
-
-
-#ifndef OPENSSL_NO_HW
-#ifndef OPENSSL_NO_HW_NURON
-
-#define NURON_LIB_NAME "nuron engine"
-#include "hw_nuron_err.c"
-
-static const char *NURON_LIBNAME = NULL;
-static const char *get_NURON_LIBNAME(void)
-	{
-	if(NURON_LIBNAME)
-		return NURON_LIBNAME;
-	return "nuronssl";
-	}
-static void free_NURON_LIBNAME(void)
-	{
-	if(NURON_LIBNAME)
-		OPENSSL_free((void*)NURON_LIBNAME);
-	NURON_LIBNAME = NULL;
-	}
-static long set_NURON_LIBNAME(const char *name)
-	{
-	free_NURON_LIBNAME();
-	return (((NURON_LIBNAME = BUF_strdup(name)) != NULL) ? 1 : 0);
-	}
-static const char *NURON_F1 = "nuron_mod_exp";
-
-/* The definitions for control commands specific to this engine */
-#define NURON_CMD_SO_PATH		ENGINE_CMD_BASE
-static const ENGINE_CMD_DEFN nuron_cmd_defns[] = {
-	{NURON_CMD_SO_PATH,
-		"SO_PATH",
-		"Specifies the path to the 'nuronssl' shared library",
-		ENGINE_CMD_FLAG_STRING},
-	{0, NULL, NULL, 0}
-	};
-
-typedef int tfnModExp(BIGNUM *r,const BIGNUM *a,const BIGNUM *p,const BIGNUM *m);
-static tfnModExp *pfnModExp = NULL;
-
-static DSO *pvDSOHandle = NULL;
-
-static int nuron_destroy(ENGINE *e)
-	{
-	free_NURON_LIBNAME();
-	ERR_unload_NURON_strings();
-	return 1;
-	}
-
-static int nuron_init(ENGINE *e)
-	{
-	if(pvDSOHandle != NULL)
-		{
-		NURONerr(NURON_F_NURON_INIT,NURON_R_ALREADY_LOADED);
-		return 0;
-		}
-
-	pvDSOHandle = DSO_load(NULL, get_NURON_LIBNAME(), NULL,
-		DSO_FLAG_NAME_TRANSLATION_EXT_ONLY);
-	if(!pvDSOHandle)
-		{
-		NURONerr(NURON_F_NURON_INIT,NURON_R_DSO_NOT_FOUND);
-		return 0;
-		}
-
-	pfnModExp = (tfnModExp *)DSO_bind_func(pvDSOHandle, NURON_F1);
-	if(!pfnModExp)
-		{
-		NURONerr(NURON_F_NURON_INIT,NURON_R_DSO_FUNCTION_NOT_FOUND);
-		return 0;
-		}
-
-	return 1;
-	}
-
-static int nuron_finish(ENGINE *e)
-	{
-	free_NURON_LIBNAME();
-	if(pvDSOHandle == NULL)
-		{
-		NURONerr(NURON_F_NURON_FINISH,NURON_R_NOT_LOADED);
-		return 0;
-		}
-	if(!DSO_free(pvDSOHandle))
-		{
-		NURONerr(NURON_F_NURON_FINISH,NURON_R_DSO_FAILURE);
-		return 0;
-		}
-	pvDSOHandle=NULL;
-	pfnModExp=NULL;
-	return 1;
-	}
-
-static int nuron_ctrl(ENGINE *e, int cmd, long i, void *p, void (*f)())
-	{
-	int initialised = ((pvDSOHandle == NULL) ? 0 : 1);
-	switch(cmd)
-		{
-	case NURON_CMD_SO_PATH:
-		if(p == NULL)
-			{
-			NURONerr(NURON_F_NURON_CTRL,ERR_R_PASSED_NULL_PARAMETER);
-			return 0;
-			}
-		if(initialised)
-			{
-			NURONerr(NURON_F_NURON_CTRL,NURON_R_ALREADY_LOADED);
-			return 0;
-			}
-		return set_NURON_LIBNAME((const char *)p);
-	default:
-		break;
-		}
-	NURONerr(NURON_F_NURON_CTRL,NURON_R_CTRL_COMMAND_NOT_IMPLEMENTED);
-	return 0;
-}
-
-static int nuron_mod_exp(BIGNUM *r,const BIGNUM *a,const BIGNUM *p,
-			 const BIGNUM *m,BN_CTX *ctx)
-	{
-	if(!pvDSOHandle)
-		{
-		NURONerr(NURON_F_NURON_MOD_EXP,NURON_R_NOT_LOADED);
-		return 0;
-		}
-	return pfnModExp(r,a,p,m);
-	}
-
-#ifndef OPENSSL_NO_RSA
-static int nuron_rsa_mod_exp(BIGNUM *r0, const BIGNUM *I, RSA *rsa)
-	{
-	return nuron_mod_exp(r0,I,rsa->d,rsa->n,NULL);
-	}
-#endif
-
-#ifndef OPENSSL_NO_DSA
-/* This code was liberated and adapted from the commented-out code in
- * dsa_ossl.c. Because of the unoptimised form of the Atalla acceleration
- * (it doesn't have a CRT form for RSA), this function means that an
- * Atalla system running with a DSA server certificate can handshake
- * around 5 or 6 times faster/more than an equivalent system running with
- * RSA. Just check out the "signs" statistics from the RSA and DSA parts
- * of "openssl speed -engine atalla dsa1024 rsa1024". */
-static int nuron_dsa_mod_exp(DSA *dsa, BIGNUM *rr, BIGNUM *a1,
-			     BIGNUM *p1, BIGNUM *a2, BIGNUM *p2, BIGNUM *m,
-			     BN_CTX *ctx, BN_MONT_CTX *in_mont)
-	{
-	BIGNUM t;
-	int to_return = 0;
- 
-	BN_init(&t);
-	/* let rr = a1 ^ p1 mod m */
-	if (!nuron_mod_exp(rr,a1,p1,m,ctx))
-		goto end;
-	/* let t = a2 ^ p2 mod m */
-	if (!nuron_mod_exp(&t,a2,p2,m,ctx))
-		goto end;
-	/* let rr = rr * t mod m */
-	if (!BN_mod_mul(rr,rr,&t,m,ctx))
-		goto end;
-	to_return = 1;
-end:
-	BN_free(&t);
-	return to_return;
-	}
-
-
-static int nuron_mod_exp_dsa(DSA *dsa, BIGNUM *r, BIGNUM *a,
-			     const BIGNUM *p, const BIGNUM *m, BN_CTX *ctx,
-			     BN_MONT_CTX *m_ctx)
-	{
-	return nuron_mod_exp(r, a, p, m, ctx);
-	}
-#endif
-
-/* This function is aliased to mod_exp (with the mont stuff dropped). */
-static int nuron_mod_exp_mont(BIGNUM *r, const BIGNUM *a, const BIGNUM *p,
-			      const BIGNUM *m, BN_CTX *ctx, BN_MONT_CTX *m_ctx)
-	{
-	return nuron_mod_exp(r, a, p, m, ctx);
-	}
-
-#ifndef OPENSSL_NO_DH
-/* This function is aliased to mod_exp (with the dh and mont dropped). */
-static int nuron_mod_exp_dh(const DH *dh, BIGNUM *r,
-		const BIGNUM *a, const BIGNUM *p,
-		const BIGNUM *m, BN_CTX *ctx, BN_MONT_CTX *m_ctx)
-	{
-	return nuron_mod_exp(r, a, p, m, ctx);
-	}
-#endif
-
-#ifndef OPENSSL_NO_RSA
-static RSA_METHOD nuron_rsa =
-	{
-	"Nuron RSA method",
-	NULL,
-	NULL,
-	NULL,
-	NULL,
-	nuron_rsa_mod_exp,
-	nuron_mod_exp_mont,
-	NULL,
-	NULL,
-	0,
-	NULL,
-	NULL,
-	NULL
-	};
-#endif
-
-#ifndef OPENSSL_NO_DSA
-static DSA_METHOD nuron_dsa =
-	{
-	"Nuron DSA method",
-	NULL, /* dsa_do_sign */
-	NULL, /* dsa_sign_setup */
-	NULL, /* dsa_do_verify */
-	nuron_dsa_mod_exp, /* dsa_mod_exp */
-	nuron_mod_exp_dsa, /* bn_mod_exp */
-	NULL, /* init */
-	NULL, /* finish */
-	0, /* flags */
-	NULL /* app_data */
-	};
-#endif
-
-#ifndef OPENSSL_NO_DH
-static DH_METHOD nuron_dh =
-	{
-	"Nuron DH method",
-	NULL,
-	NULL,
-	nuron_mod_exp_dh,
-	NULL,
-	NULL,
-	0,
-	NULL
-	};
-#endif
-
-/* Constants used when creating the ENGINE */
-static const char *engine_nuron_id = "nuron";
-static const char *engine_nuron_name = "Nuron hardware engine support";
-
-/* This internal function is used by ENGINE_nuron() and possibly by the
- * "dynamic" ENGINE support too */
-static int bind_helper(ENGINE *e)
-	{
-#ifndef OPENSSL_NO_RSA
-	const RSA_METHOD *meth1;
-#endif
-#ifndef OPENSSL_NO_DSA
-	const DSA_METHOD *meth2;
-#endif
-#ifndef OPENSSL_NO_DH
-	const DH_METHOD *meth3;
-#endif
-	if(!ENGINE_set_id(e, engine_nuron_id) ||
-			!ENGINE_set_name(e, engine_nuron_name) ||
-#ifndef OPENSSL_NO_RSA
-			!ENGINE_set_RSA(e, &nuron_rsa) ||
-#endif
-#ifndef OPENSSL_NO_DSA
-			!ENGINE_set_DSA(e, &nuron_dsa) ||
-#endif
-#ifndef OPENSSL_NO_DH
-			!ENGINE_set_DH(e, &nuron_dh) ||
-#endif
-			!ENGINE_set_destroy_function(e, nuron_destroy) ||
-			!ENGINE_set_init_function(e, nuron_init) ||
-			!ENGINE_set_finish_function(e, nuron_finish) ||
-			!ENGINE_set_ctrl_function(e, nuron_ctrl) ||
-			!ENGINE_set_cmd_defns(e, nuron_cmd_defns))
-		return 0;
-
-#ifndef OPENSSL_NO_RSA
-	/* We know that the "PKCS1_SSLeay()" functions hook properly
-	 * to the nuron-specific mod_exp and mod_exp_crt so we use
-	 * those functions. NB: We don't use ENGINE_openssl() or
-	 * anything "more generic" because something like the RSAref
-	 * code may not hook properly, and if you own one of these
-	 * cards then you have the right to do RSA operations on it
-	 * anyway! */ 
-	meth1=RSA_PKCS1_SSLeay();
-	nuron_rsa.rsa_pub_enc=meth1->rsa_pub_enc;
-	nuron_rsa.rsa_pub_dec=meth1->rsa_pub_dec;
-	nuron_rsa.rsa_priv_enc=meth1->rsa_priv_enc;
-	nuron_rsa.rsa_priv_dec=meth1->rsa_priv_dec;
-#endif
-
-#ifndef OPENSSL_NO_DSA
-	/* Use the DSA_OpenSSL() method and just hook the mod_exp-ish
-	 * bits. */
-	meth2=DSA_OpenSSL();
-	nuron_dsa.dsa_do_sign=meth2->dsa_do_sign;
-	nuron_dsa.dsa_sign_setup=meth2->dsa_sign_setup;
-	nuron_dsa.dsa_do_verify=meth2->dsa_do_verify;
-#endif
-
-#ifndef OPENSSL_NO_DH
-	/* Much the same for Diffie-Hellman */
-	meth3=DH_OpenSSL();
-	nuron_dh.generate_key=meth3->generate_key;
-	nuron_dh.compute_key=meth3->compute_key;
-#endif
-
-	/* Ensure the nuron error handling is set up */
-	ERR_load_NURON_strings();
-	return 1;
-	}
-
-#ifndef ENGINE_DYNAMIC_SUPPORT
-static ENGINE *engine_nuron(void)
-	{
-	ENGINE *ret = ENGINE_new();
-	if(!ret)
-		return NULL;
-	if(!bind_helper(ret))
-		{
-		ENGINE_free(ret);
-		return NULL;
-		}
-	return ret;
-	}
-
-void ENGINE_load_nuron(void)
-	{
-	/* Copied from eng_[openssl|dyn].c */
-	ENGINE *toadd = engine_nuron();
-	if(!toadd) return;
-	ENGINE_add(toadd);
-	ENGINE_free(toadd);
-	ERR_clear_error();
-	}
-#endif
-
-/* This stuff is needed if this ENGINE is being compiled into a self-contained
- * shared-library. */	   
-#ifdef ENGINE_DYNAMIC_SUPPORT
-static int bind_fn(ENGINE *e, const char *id)
-	{
-	if(id && (strcmp(id, engine_nuron_id) != 0))
-		return 0;
-	if(!bind_helper(e))
-		return 0;
-	return 1;
-	}       
-IMPLEMENT_DYNAMIC_CHECK_FN()
-IMPLEMENT_DYNAMIC_BIND_FN(bind_fn)
-#endif /* ENGINE_DYNAMIC_SUPPORT */
-
-#endif /* !OPENSSL_NO_HW_NURON */
-#endif /* !OPENSSL_NO_HW */
diff --git a/crypto/openssl/crypto/engine/hw_nuron_err.c b/crypto/openssl/crypto/engine/hw_nuron_err.c
deleted file mode 100644
index df9d7bde7669..000000000000
--- a/crypto/openssl/crypto/engine/hw_nuron_err.c
+++ /dev/null
@@ -1,142 +0,0 @@
-/* hw_nuron_err.c */
-/* ====================================================================
- * Copyright (c) 1999 The OpenSSL Project.  All rights reserved.
- *
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions
- * are met:
- *
- * 1. Redistributions of source code must retain the above copyright
- *    notice, this list of conditions and the following disclaimer. 
- *
- * 2. Redistributions in binary form must reproduce the above copyright
- *    notice, this list of conditions and the following disclaimer in
- *    the documentation and/or other materials provided with the
- *    distribution.
- *
- * 3. All advertising materials mentioning features or use of this
- *    software must display the following acknowledgment:
- *    "This product includes software developed by the OpenSSL Project
- *    for use in the OpenSSL Toolkit. (http://www.OpenSSL.org/)"
- *
- * 4. The names "OpenSSL Toolkit" and "OpenSSL Project" must not be used to
- *    endorse or promote products derived from this software without
- *    prior written permission. For written permission, please contact
- *    openssl-core@OpenSSL.org.
- *
- * 5. Products derived from this software may not be called "OpenSSL"
- *    nor may "OpenSSL" appear in their names without prior written
- *    permission of the OpenSSL Project.
- *
- * 6. Redistributions of any form whatsoever must retain the following
- *    acknowledgment:
- *    "This product includes software developed by the OpenSSL Project
- *    for use in the OpenSSL Toolkit (http://www.OpenSSL.org/)"
- *
- * THIS SOFTWARE IS PROVIDED BY THE OpenSSL PROJECT ``AS IS'' AND ANY
- * EXPRESSED OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
- * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR
- * PURPOSE ARE DISCLAIMED.  IN NO EVENT SHALL THE OpenSSL PROJECT OR
- * ITS CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
- * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
- * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
- * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
- * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
- * STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
- * ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED
- * OF THE POSSIBILITY OF SUCH DAMAGE.
- * ====================================================================
- *
- * This product includes cryptographic software written by Eric Young
- * (eay@cryptsoft.com).  This product includes software written by Tim
- * Hudson (tjh@cryptsoft.com).
- *
- */
-
-/* NOTE: this file was auto generated by the mkerr.pl script: any changes
- * made to it will be overwritten when the script next updates this file,
- * only reason strings will be preserved.
- */
-
-#include <stdio.h>
-#include <openssl/err.h>
-#include "hw_nuron_err.h"
-
-/* BEGIN ERROR CODES */
-#ifndef OPENSSL_NO_ERR
-static ERR_STRING_DATA NURON_str_functs[]=
-	{
-{ERR_PACK(0,NURON_F_NURON_CTRL,0),	"NURON_CTRL"},
-{ERR_PACK(0,NURON_F_NURON_FINISH,0),	"NURON_FINISH"},
-{ERR_PACK(0,NURON_F_NURON_INIT,0),	"NURON_INIT"},
-{ERR_PACK(0,NURON_F_NURON_MOD_EXP,0),	"NURON_MOD_EXP"},
-{0,NULL}
-	};
-
-static ERR_STRING_DATA NURON_str_reasons[]=
-	{
-{NURON_R_ALREADY_LOADED                  ,"already loaded"},
-{NURON_R_CTRL_COMMAND_NOT_IMPLEMENTED    ,"ctrl command not implemented"},
-{NURON_R_DSO_FAILURE                     ,"dso failure"},
-{NURON_R_DSO_FUNCTION_NOT_FOUND          ,"dso function not found"},
-{NURON_R_DSO_NOT_FOUND                   ,"dso not found"},
-{NURON_R_NOT_LOADED                      ,"not loaded"},
-{0,NULL}
-	};
-
-#endif
-
-#ifdef NURON_LIB_NAME
-static ERR_STRING_DATA NURON_lib_name[]=
-        {
-{0	,NURON_LIB_NAME},
-{0,NULL}
-	};
-#endif
-
-
-static int NURON_lib_error_code=0;
-static int NURON_error_init=1;
-
-static void ERR_load_NURON_strings(void)
-	{
-	if (NURON_lib_error_code == 0)
-		NURON_lib_error_code=ERR_get_next_error_library();
-
-	if (NURON_error_init)
-		{
-		NURON_error_init=0;
-#ifndef OPENSSL_NO_ERR
-		ERR_load_strings(NURON_lib_error_code,NURON_str_functs);
-		ERR_load_strings(NURON_lib_error_code,NURON_str_reasons);
-#endif
-
-#ifdef NURON_LIB_NAME
-		NURON_lib_name->error = ERR_PACK(NURON_lib_error_code,0,0);
-		ERR_load_strings(0,NURON_lib_name);
-#endif
-		}
-	}
-
-static void ERR_unload_NURON_strings(void)
-	{
-	if (NURON_error_init == 0)
-		{
-#ifndef OPENSSL_NO_ERR
-		ERR_unload_strings(NURON_lib_error_code,NURON_str_functs);
-		ERR_unload_strings(NURON_lib_error_code,NURON_str_reasons);
-#endif
-
-#ifdef NURON_LIB_NAME
-		ERR_unload_strings(0,NURON_lib_name);
-#endif
-		NURON_error_init=1;
-		}
-	}
-
-static void ERR_NURON_error(int function, int reason, char *file, int line)
-	{
-	if (NURON_lib_error_code == 0)
-		NURON_lib_error_code=ERR_get_next_error_library();
-	ERR_PUT_error(NURON_lib_error_code,function,reason,file,line);
-	}
diff --git a/crypto/openssl/crypto/engine/hw_nuron_err.h b/crypto/openssl/crypto/engine/hw_nuron_err.h
deleted file mode 100644
index a56bfdf30398..000000000000
--- a/crypto/openssl/crypto/engine/hw_nuron_err.h
+++ /dev/null
@@ -1,86 +0,0 @@
-/* ====================================================================
- * Copyright (c) 2001 The OpenSSL Project.  All rights reserved.
- *
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions
- * are met:
- *
- * 1. Redistributions of source code must retain the above copyright
- *    notice, this list of conditions and the following disclaimer. 
- *
- * 2. Redistributions in binary form must reproduce the above copyright
- *    notice, this list of conditions and the following disclaimer in
- *    the documentation and/or other materials provided with the
- *    distribution.
- *
- * 3. All advertising materials mentioning features or use of this
- *    software must display the following acknowledgment:
- *    "This product includes software developed by the OpenSSL Project
- *    for use in the OpenSSL Toolkit. (http://www.openssl.org/)"
- *
- * 4. The names "OpenSSL Toolkit" and "OpenSSL Project" must not be used to
- *    endorse or promote products derived from this software without
- *    prior written permission. For written permission, please contact
- *    openssl-core@openssl.org.
- *
- * 5. Products derived from this software may not be called "OpenSSL"
- *    nor may "OpenSSL" appear in their names without prior written
- *    permission of the OpenSSL Project.
- *
- * 6. Redistributions of any form whatsoever must retain the following
- *    acknowledgment:
- *    "This product includes software developed by the OpenSSL Project
- *    for use in the OpenSSL Toolkit (http://www.openssl.org/)"
- *
- * THIS SOFTWARE IS PROVIDED BY THE OpenSSL PROJECT ``AS IS'' AND ANY
- * EXPRESSED OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
- * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR
- * PURPOSE ARE DISCLAIMED.  IN NO EVENT SHALL THE OpenSSL PROJECT OR
- * ITS CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
- * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
- * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
- * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
- * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
- * STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
- * ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED
- * OF THE POSSIBILITY OF SUCH DAMAGE.
- * ====================================================================
- *
- * This product includes cryptographic software written by Eric Young
- * (eay@cryptsoft.com).  This product includes software written by Tim
- * Hudson (tjh@cryptsoft.com).
- *
- */
-
-#ifndef HEADER_NURON_ERR_H
-#define HEADER_NURON_ERR_H
-
-/* BEGIN ERROR CODES */
-/* The following lines are auto generated by the script mkerr.pl. Any changes
- * made after this point may be overwritten when the script is next run.
- */
-static void ERR_load_NURON_strings(void);
-static void ERR_unload_NURON_strings(void);
-static void ERR_NURON_error(int function, int reason, char *file, int line);
-#define NURONerr(f,r) ERR_NURON_error((f),(r),__FILE__,__LINE__)
-
-/* Error codes for the NURON functions. */
-
-/* Function codes. */
-#define NURON_F_NURON_CTRL				 100
-#define NURON_F_NURON_FINISH				 101
-#define NURON_F_NURON_INIT				 102
-#define NURON_F_NURON_MOD_EXP				 103
-
-/* Reason codes. */
-#define NURON_R_ALREADY_LOADED				 100
-#define NURON_R_CTRL_COMMAND_NOT_IMPLEMENTED		 101
-#define NURON_R_DSO_FAILURE				 102
-#define NURON_R_DSO_FUNCTION_NOT_FOUND			 103
-#define NURON_R_DSO_NOT_FOUND				 104
-#define NURON_R_NOT_LOADED				 105
-
-#ifdef  __cplusplus
-}
-#endif
-#endif
diff --git a/crypto/openssl/crypto/engine/hw_sureware.c b/crypto/openssl/crypto/engine/hw_sureware.c
deleted file mode 100644
index fca467e69013..000000000000
--- a/crypto/openssl/crypto/engine/hw_sureware.c
+++ /dev/null
@@ -1,1039 +0,0 @@
-/* Written by Corinne Dive-Reclus(cdive@baltimore.com)
-* 
-*
-* Redistribution and use in source and binary forms, with or without
-* modification, are permitted provided that the following conditions
-* are met:
-*
-* 1. Redistributions of source code must retain the above copyright
-*    notice, this list of conditions and the following disclaimer. 
-*
-* 2. Redistributions in binary form must reproduce the above copyright
-*    notice, this list of conditions and the following disclaimer in
-*    the documentation and/or other materials provided with the
-*    distribution.
-*
-* 3. All advertising materials mentioning features or use of this
-*    software must display the following acknowledgment:
-*    "This product includes software developed by the OpenSSL Project
-*    for use in the OpenSSL Toolkit. (http://www.OpenSSL.org/)"
-*
-* 4. The names "OpenSSL Toolkit" and "OpenSSL Project" must not be used to
-*    endorse or promote products derived from this software without
-*    prior written permission. For written permission, please contact
-*    licensing@OpenSSL.org.
-*
-* 5. Products derived from this software may not be called "OpenSSL"
-*    nor may "OpenSSL" appear in their names without prior written
-*    permission of the OpenSSL Project.
-*
-* 6. Redistributions of any form whatsoever must retain the following
-*    acknowledgment:
-*    "This product includes software developed by the OpenSSL Project
-*    for use in the OpenSSL Toolkit (http://www.OpenSSL.org/)"
-*
-* Written by Corinne Dive-Reclus(cdive@baltimore.com)
-*
-* Copyright@2001 Baltimore Technologies Ltd.
-* All right Reserved.
-*																								*	
-*		THIS FILE IS PROVIDED BY BALTIMORE TECHNOLOGIES ``AS IS'' AND																			*
-*		ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE					* 
-*		IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE				*
-*		ARE DISCLAIMED.  IN NO EVENT SHALL BALTIMORE TECHNOLOGIES BE LIABLE						*
-*		FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL				*
-*		DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS					*
-*		OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)					*
-*		HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT				*
-*		LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY				*
-*		OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF					*
-*		SUCH DAMAGE.																			*
-====================================================================*/
-
-#include <stdio.h>
-#include "cryptlib.h"
-#include <openssl/crypto.h>
-#include <openssl/pem.h>
-#include <openssl/dso.h>
-#include "eng_int.h"
-#include "engine.h"
-#include <openssl/engine.h>
-
-#ifndef OPENSSL_NO_HW
-#ifndef OPENSSL_NO_HW_SUREWARE
-
-#ifdef FLAT_INC
-#include "sureware.h"
-#else
-#include "vendor_defns/sureware.h"
-#endif
-
-#define SUREWARE_LIB_NAME "sureware engine"
-#include "hw_sureware_err.c"
-
-static int surewarehk_ctrl(ENGINE *e, int cmd, long i, void *p, void (*f)());
-static int surewarehk_destroy(ENGINE *e);
-static int surewarehk_init(ENGINE *e);
-static int surewarehk_finish(ENGINE *e);
-static int surewarehk_modexp(BIGNUM *r, const BIGNUM *a, const BIGNUM *p,
-	const BIGNUM *m, BN_CTX *ctx);
-
-/* RSA stuff */
-static int surewarehk_rsa_priv_dec(int flen,const unsigned char *from,unsigned char *to,
-			RSA *rsa,int padding);
-static int surewarehk_rsa_sign(int flen,const unsigned char *from,unsigned char *to,
-			    RSA *rsa,int padding);
-
-/* RAND stuff */
-static int surewarehk_rand_bytes(unsigned char *buf, int num);
-static void surewarehk_rand_seed(const void *buf, int num);
-static void surewarehk_rand_add(const void *buf, int num, double entropy);
-
-/* KM stuff */
-static EVP_PKEY *surewarehk_load_privkey(ENGINE *e, const char *key_id,
-	UI_METHOD *ui_method, void *callback_data);
-static EVP_PKEY *surewarehk_load_pubkey(ENGINE *e, const char *key_id,
-	UI_METHOD *ui_method, void *callback_data);
-static void surewarehk_ex_free(void *obj, void *item, CRYPTO_EX_DATA *ad,
-	int idx,long argl, void *argp);
-#if 0
-static void surewarehk_dh_ex_free(void *obj, void *item, CRYPTO_EX_DATA *ad,
-	int idx,long argl, void *argp);
-#endif
-
-#ifndef OPENSSL_NO_RSA
-/* This function is aliased to mod_exp (with the mont stuff dropped). */
-static int surewarehk_mod_exp_mont(BIGNUM *r, const BIGNUM *a, const BIGNUM *p,
-		const BIGNUM *m, BN_CTX *ctx, BN_MONT_CTX *m_ctx)
-{
-	return surewarehk_modexp(r, a, p, m, ctx);
-}
-
-/* Our internal RSA_METHOD that we provide pointers to */
-static RSA_METHOD surewarehk_rsa =
-	{
-	"SureWare RSA method",
-	NULL, /* pub_enc*/
-	NULL, /* pub_dec*/
-	surewarehk_rsa_sign, /* our rsa_sign is OpenSSL priv_enc*/
-	surewarehk_rsa_priv_dec, /* priv_dec*/
-	NULL, /*mod_exp*/
-	surewarehk_mod_exp_mont, /*mod_exp_mongomery*/
-	NULL, /* init*/
-	NULL, /* finish*/
-	0,	/* RSA flag*/
-	NULL, 
-	NULL, /* OpenSSL sign*/
-	NULL  /* OpenSSL verify*/
-	};
-#endif
-
-#ifndef OPENSSL_NO_DH
-/* Our internal DH_METHOD that we provide pointers to */
-/* This function is aliased to mod_exp (with the dh and mont dropped). */
-static int surewarehk_modexp_dh(const DH *dh, BIGNUM *r, const BIGNUM *a,
-	const BIGNUM *p, const BIGNUM *m, BN_CTX *ctx, BN_MONT_CTX *m_ctx)
-{
-	return surewarehk_modexp(r, a, p, m, ctx);
-}
-
-static DH_METHOD surewarehk_dh =
-	{
-	"SureWare DH method",
-	NULL,/*gen_key*/
-	NULL,/*agree,*/
-	surewarehk_modexp_dh, /*dh mod exp*/
-	NULL, /* init*/
-	NULL, /* finish*/
-	0,    /* flags*/
-	NULL 
-	};
-#endif
-
-static RAND_METHOD surewarehk_rand =
-	{
-	/* "SureWare RAND method", */
-	surewarehk_rand_seed,
-	surewarehk_rand_bytes,
-	NULL,/*cleanup*/
-	surewarehk_rand_add,
-	surewarehk_rand_bytes,
-	NULL,/*rand_status*/
-	};
-
-#ifndef OPENSSL_NO_DSA
-/* DSA stuff */
-static	DSA_SIG * surewarehk_dsa_do_sign(const unsigned char *dgst, int dlen, DSA *dsa);
-static int surewarehk_dsa_mod_exp(DSA *dsa, BIGNUM *rr, BIGNUM *a1,
-		BIGNUM *p1, BIGNUM *a2, BIGNUM *p2, BIGNUM *m,
-		BN_CTX *ctx, BN_MONT_CTX *in_mont)
-{
-	BIGNUM t;
-	int to_return = 0;
-	BN_init(&t);
-	/* let rr = a1 ^ p1 mod m */
-	if (!surewarehk_modexp(rr,a1,p1,m,ctx)) goto end;
-	/* let t = a2 ^ p2 mod m */
-	if (!surewarehk_modexp(&t,a2,p2,m,ctx)) goto end;
-	/* let rr = rr * t mod m */
-	if (!BN_mod_mul(rr,rr,&t,m,ctx)) goto end;
-	to_return = 1;
-end:
-	BN_free(&t);
-	return to_return;
-}
-
-static DSA_METHOD surewarehk_dsa =
-	{
-	 "SureWare DSA method", 
-	surewarehk_dsa_do_sign,
-	NULL,/*sign setup*/
-	NULL,/*verify,*/
-	surewarehk_dsa_mod_exp,/*mod exp*/
-	NULL,/*bn mod exp*/
-	NULL, /*init*/
-	NULL,/*finish*/
-	0,
-	NULL,
-	};
-#endif
-
-static const char *engine_sureware_id = "sureware";
-static const char *engine_sureware_name = "SureWare hardware engine support";
-
-/* Now, to our own code */
-
-/* As this is only ever called once, there's no need for locking
- * (indeed - the lock will already be held by our caller!!!) */
-static int bind_sureware(ENGINE *e)
-{
-#ifndef OPENSSL_NO_RSA
-	const RSA_METHOD *meth1;
-#endif
-#ifndef OPENSSL_NO_DSA
-	const DSA_METHOD *meth2;
-#endif
-#ifndef OPENSSL_NO_DH
-	const DH_METHOD *meth3;
-#endif
-
-	if(!ENGINE_set_id(e, engine_sureware_id) ||
-	   !ENGINE_set_name(e, engine_sureware_name) ||
-#ifndef OPENSSL_NO_RSA
-	   !ENGINE_set_RSA(e, &surewarehk_rsa) ||
-#endif
-#ifndef OPENSSL_NO_DSA
-	   !ENGINE_set_DSA(e, &surewarehk_dsa) ||
-#endif
-#ifndef OPENSSL_NO_DH
-	   !ENGINE_set_DH(e, &surewarehk_dh) ||
-#endif
-	   !ENGINE_set_RAND(e, &surewarehk_rand) ||
-	   !ENGINE_set_destroy_function(e, surewarehk_destroy) ||
-	   !ENGINE_set_init_function(e, surewarehk_init) ||
-	   !ENGINE_set_finish_function(e, surewarehk_finish) ||
-	   !ENGINE_set_ctrl_function(e, surewarehk_ctrl) ||
-	   !ENGINE_set_load_privkey_function(e, surewarehk_load_privkey) ||
-	   !ENGINE_set_load_pubkey_function(e, surewarehk_load_pubkey))
-	  return 0;
-
-#ifndef OPENSSL_NO_RSA
-	/* We know that the "PKCS1_SSLeay()" functions hook properly
-	 * to the cswift-specific mod_exp and mod_exp_crt so we use
-	 * those functions. NB: We don't use ENGINE_openssl() or
-	 * anything "more generic" because something like the RSAref
-	 * code may not hook properly, and if you own one of these
-	 * cards then you have the right to do RSA operations on it
-	 * anyway! */ 
-	meth1 = RSA_PKCS1_SSLeay();
-	if (meth1)
-	{
-		surewarehk_rsa.rsa_pub_enc = meth1->rsa_pub_enc;
-		surewarehk_rsa.rsa_pub_dec = meth1->rsa_pub_dec;
-	}
-#endif
-
-#ifndef OPENSSL_NO_DSA
-	/* Use the DSA_OpenSSL() method and just hook the mod_exp-ish
-	 * bits. */
-	meth2 = DSA_OpenSSL();
-	if (meth2)
-	{
-		surewarehk_dsa.dsa_do_verify = meth2->dsa_do_verify;
-	}
-#endif
-
-#ifndef OPENSSL_NO_DH
-	/* Much the same for Diffie-Hellman */
-	meth3 = DH_OpenSSL();
-	if (meth3)
-	{
-		surewarehk_dh.generate_key = meth3->generate_key;
-		surewarehk_dh.compute_key = meth3->compute_key;
-	}
-#endif
-
-	/* Ensure the sureware error handling is set up */
-	ERR_load_SUREWARE_strings();
-	return 1;
-}
-
-#ifdef ENGINE_DYNAMIC_SUPPORT
-static int bind_helper(ENGINE *e, const char *id)
-	{
-	if(id && (strcmp(id, engine_sureware_id) != 0))
-		return 0;
-	if(!bind_sureware(e))
-		return 0;
-	return 1;
-	}       
-IMPLEMENT_DYNAMIC_CHECK_FN()
-IMPLEMENT_DYNAMIC_BIND_FN(bind_helper)
-#else
-static ENGINE *engine_sureware(void)
-	{
-	ENGINE *ret = ENGINE_new();
-	if(!ret)
-		return NULL;
-	if(!bind_sureware(ret))
-		{
-		ENGINE_free(ret);
-		return NULL;
-		}
-	return ret;
-	}
-
-void ENGINE_load_sureware(void)
-	{
-	/* Copied from eng_[openssl|dyn].c */
-	ENGINE *toadd = engine_sureware();
-	if(!toadd) return;
-	ENGINE_add(toadd);
-	ENGINE_free(toadd);
-	ERR_clear_error();
-	}
-#endif
-
-/* This is a process-global DSO handle used for loading and unloading
- * the SureWareHook library. NB: This is only set (or unset) during an
- * init() or finish() call (reference counts permitting) and they're
- * operating with global locks, so this should be thread-safe
- * implicitly. */
-static DSO *surewarehk_dso = NULL;
-#ifndef OPENSSL_NO_RSA
-static int rsaHndidx = -1;	/* Index for KM handle.  Not really used yet. */
-#endif
-#ifndef OPENSSL_NO_DSA
-static int dsaHndidx = -1;	/* Index for KM handle.  Not really used yet. */
-#endif
-
-/* These are the function pointers that are (un)set when the library has
- * successfully (un)loaded. */
-static SureWareHook_Init_t *p_surewarehk_Init = NULL;
-static SureWareHook_Finish_t *p_surewarehk_Finish = NULL;
-static SureWareHook_Rand_Bytes_t *p_surewarehk_Rand_Bytes = NULL;
-static SureWareHook_Rand_Seed_t *p_surewarehk_Rand_Seed = NULL;
-static SureWareHook_Load_Privkey_t *p_surewarehk_Load_Privkey = NULL;
-static SureWareHook_Info_Pubkey_t *p_surewarehk_Info_Pubkey = NULL;
-static SureWareHook_Load_Rsa_Pubkey_t *p_surewarehk_Load_Rsa_Pubkey = NULL;
-static SureWareHook_Load_Dsa_Pubkey_t *p_surewarehk_Load_Dsa_Pubkey = NULL;
-static SureWareHook_Free_t *p_surewarehk_Free=NULL;
-static SureWareHook_Rsa_Priv_Dec_t *p_surewarehk_Rsa_Priv_Dec=NULL;
-static SureWareHook_Rsa_Sign_t *p_surewarehk_Rsa_Sign=NULL;
-static SureWareHook_Dsa_Sign_t *p_surewarehk_Dsa_Sign=NULL;
-static SureWareHook_Mod_Exp_t *p_surewarehk_Mod_Exp=NULL;
-
-/* Used in the DSO operations. */
-static const char *surewarehk_LIBNAME = "SureWareHook";
-static const char *n_surewarehk_Init = "SureWareHook_Init";
-static const char *n_surewarehk_Finish = "SureWareHook_Finish";
-static const char *n_surewarehk_Rand_Bytes="SureWareHook_Rand_Bytes";
-static const char *n_surewarehk_Rand_Seed="SureWareHook_Rand_Seed";
-static const char *n_surewarehk_Load_Privkey="SureWareHook_Load_Privkey";
-static const char *n_surewarehk_Info_Pubkey="SureWareHook_Info_Pubkey";
-static const char *n_surewarehk_Load_Rsa_Pubkey="SureWareHook_Load_Rsa_Pubkey";
-static const char *n_surewarehk_Load_Dsa_Pubkey="SureWareHook_Load_Dsa_Pubkey";
-static const char *n_surewarehk_Free="SureWareHook_Free";
-static const char *n_surewarehk_Rsa_Priv_Dec="SureWareHook_Rsa_Priv_Dec";
-static const char *n_surewarehk_Rsa_Sign="SureWareHook_Rsa_Sign";
-static const char *n_surewarehk_Dsa_Sign="SureWareHook_Dsa_Sign";
-static const char *n_surewarehk_Mod_Exp="SureWareHook_Mod_Exp";
-static BIO *logstream = NULL;
-
-/* SureWareHook library functions and mechanics - these are used by the
- * higher-level functions further down. NB: As and where there's no
- * error checking, take a look lower down where these functions are
- * called, the checking and error handling is probably down there. 
-*/
-static int threadsafe=1;
-static int surewarehk_ctrl(ENGINE *e, int cmd, long i, void *p, void (*f)())
-{
-	int to_return = 1;
-
-	switch(cmd)
-	{
-		case ENGINE_CTRL_SET_LOGSTREAM:
-		{
-			BIO *bio = (BIO *)p;
-			CRYPTO_w_lock(CRYPTO_LOCK_ENGINE);
-			if (logstream)
-			{
-				BIO_free(logstream);
-				logstream = NULL;
-			}
-			if (CRYPTO_add(&bio->references,1,CRYPTO_LOCK_BIO) > 1)
-				logstream = bio;
-			else
-				SUREWAREerr(SUREWARE_F_SUREWAREHK_CTRL,SUREWARE_R_BIO_WAS_FREED);
-		}
-		CRYPTO_w_unlock(CRYPTO_LOCK_ENGINE);
-		break;
-	/* This will prevent the initialisation function from "installing"
-	 * the mutex-handling callbacks, even if they are available from
-	 * within the library (or were provided to the library from the
-	 * calling application). This is to remove any baggage for
-	 * applications not using multithreading. */
-	case ENGINE_CTRL_CHIL_NO_LOCKING:
-		CRYPTO_w_lock(CRYPTO_LOCK_ENGINE);
-		threadsafe = 0;
-		CRYPTO_w_unlock(CRYPTO_LOCK_ENGINE);
-		break;
-
-	/* The command isn't understood by this engine */
-	default:
-		SUREWAREerr(SUREWARE_F_SUREWAREHK_CTRL,
-			ENGINE_R_CTRL_COMMAND_NOT_IMPLEMENTED);
-		to_return = 0;
-		break;
-		}
-
-	return to_return;
-}
-
-/* Destructor (complements the "ENGINE_surewarehk()" constructor) */
-static int surewarehk_destroy(ENGINE *e)
-{
-	ERR_unload_SUREWARE_strings();
-	return 1;
-}
-
-/* (de)initialisation functions. */
-static int surewarehk_init(ENGINE *e)
-{
-	char msg[64]="ENGINE_init";
-	SureWareHook_Init_t *p1=NULL;
-	SureWareHook_Finish_t *p2=NULL;
-	SureWareHook_Rand_Bytes_t *p3=NULL;
-	SureWareHook_Rand_Seed_t *p4=NULL;
-	SureWareHook_Load_Privkey_t *p5=NULL;
-	SureWareHook_Load_Rsa_Pubkey_t *p6=NULL;
-	SureWareHook_Free_t *p7=NULL;
-	SureWareHook_Rsa_Priv_Dec_t *p8=NULL;
-	SureWareHook_Rsa_Sign_t *p9=NULL;
-	SureWareHook_Dsa_Sign_t *p12=NULL;
-	SureWareHook_Info_Pubkey_t *p13=NULL;
-	SureWareHook_Load_Dsa_Pubkey_t *p14=NULL;
-	SureWareHook_Mod_Exp_t *p15=NULL;
-
-	if(surewarehk_dso != NULL)
-	{
-		SUREWAREerr(SUREWARE_F_SUREWAREHK_INIT,ENGINE_R_ALREADY_LOADED);
-		goto err;
-	}
-	/* Attempt to load libsurewarehk.so/surewarehk.dll/whatever. */
-	surewarehk_dso = DSO_load(NULL, surewarehk_LIBNAME, NULL, 0);
-	if(surewarehk_dso == NULL)
-	{
-		SUREWAREerr(SUREWARE_F_SUREWAREHK_INIT,ENGINE_R_DSO_FAILURE);
-		goto err;
-	}
-	if(!(p1=(SureWareHook_Init_t*)DSO_bind_func(surewarehk_dso, n_surewarehk_Init)) ||
-	   !(p2=(SureWareHook_Finish_t*)DSO_bind_func(surewarehk_dso, n_surewarehk_Finish)) ||
-	   !(p3=(SureWareHook_Rand_Bytes_t*)DSO_bind_func(surewarehk_dso, n_surewarehk_Rand_Bytes)) ||
-	   !(p4=(SureWareHook_Rand_Seed_t*)DSO_bind_func(surewarehk_dso, n_surewarehk_Rand_Seed)) ||
-	   !(p5=(SureWareHook_Load_Privkey_t*)DSO_bind_func(surewarehk_dso, n_surewarehk_Load_Privkey)) ||
-	   !(p6=(SureWareHook_Load_Rsa_Pubkey_t*)DSO_bind_func(surewarehk_dso, n_surewarehk_Load_Rsa_Pubkey)) ||
-	   !(p7=(SureWareHook_Free_t*)DSO_bind_func(surewarehk_dso, n_surewarehk_Free)) ||
-	   !(p8=(SureWareHook_Rsa_Priv_Dec_t*)DSO_bind_func(surewarehk_dso, n_surewarehk_Rsa_Priv_Dec)) ||
-	   !(p9=(SureWareHook_Rsa_Sign_t*)DSO_bind_func(surewarehk_dso, n_surewarehk_Rsa_Sign)) ||
-	   !(p12=(SureWareHook_Dsa_Sign_t*)DSO_bind_func(surewarehk_dso, n_surewarehk_Dsa_Sign)) ||
-	   !(p13=(SureWareHook_Info_Pubkey_t*)DSO_bind_func(surewarehk_dso, n_surewarehk_Info_Pubkey)) ||
-	   !(p14=(SureWareHook_Load_Dsa_Pubkey_t*)DSO_bind_func(surewarehk_dso, n_surewarehk_Load_Dsa_Pubkey)) ||
-	   !(p15=(SureWareHook_Mod_Exp_t*)DSO_bind_func(surewarehk_dso, n_surewarehk_Mod_Exp)))
-	{
-		SUREWAREerr(SUREWARE_F_SUREWAREHK_INIT,ENGINE_R_DSO_FAILURE);
-		goto err;
-	}
-	/* Copy the pointers */
-	p_surewarehk_Init = p1;
-	p_surewarehk_Finish = p2;
-	p_surewarehk_Rand_Bytes = p3;
-	p_surewarehk_Rand_Seed = p4;
-	p_surewarehk_Load_Privkey = p5;
-	p_surewarehk_Load_Rsa_Pubkey = p6;
-	p_surewarehk_Free = p7;
-	p_surewarehk_Rsa_Priv_Dec = p8;
-	p_surewarehk_Rsa_Sign = p9;
-	p_surewarehk_Dsa_Sign = p12;
-	p_surewarehk_Info_Pubkey = p13;
-	p_surewarehk_Load_Dsa_Pubkey = p14;
-	p_surewarehk_Mod_Exp = p15;
-	/* Contact the hardware and initialises it. */
-	if(p_surewarehk_Init(msg,threadsafe)==SUREWAREHOOK_ERROR_UNIT_FAILURE)
-	{
-		SUREWAREerr(SUREWARE_F_SUREWAREHK_INIT,SUREWARE_R_UNIT_FAILURE);
-		goto err;
-	}
-	if(p_surewarehk_Init(msg,threadsafe)==SUREWAREHOOK_ERROR_UNIT_FAILURE)
-	{
-		SUREWAREerr(SUREWARE_F_SUREWAREHK_INIT,SUREWARE_R_UNIT_FAILURE);
-		goto err;
-	}
-	/* try to load the default private key, if failed does not return a failure but
-           wait for an explicit ENGINE_load_privakey */
-	surewarehk_load_privkey(e,NULL,NULL,NULL);
-
-	/* Everything's fine. */
-#ifndef OPENSSL_NO_RSA
-	if (rsaHndidx == -1)
-		rsaHndidx = RSA_get_ex_new_index(0,
-						"SureWareHook RSA key handle",
-						NULL, NULL, surewarehk_ex_free);
-#endif
-#ifndef OPENSSL_NO_DSA
-	if (dsaHndidx == -1)
-		dsaHndidx = DSA_get_ex_new_index(0,
-						"SureWareHook DSA key handle",
-						NULL, NULL, surewarehk_ex_free);
-#endif
-
-	return 1;
-err:
-	if(surewarehk_dso)
-		DSO_free(surewarehk_dso);
-	surewarehk_dso = NULL;
-	p_surewarehk_Init = NULL;
-	p_surewarehk_Finish = NULL;
-	p_surewarehk_Rand_Bytes = NULL;
-	p_surewarehk_Rand_Seed = NULL;
-	p_surewarehk_Load_Privkey = NULL;
-	p_surewarehk_Load_Rsa_Pubkey = NULL;
-	p_surewarehk_Free = NULL;
-	p_surewarehk_Rsa_Priv_Dec = NULL;
-	p_surewarehk_Rsa_Sign = NULL;
-	p_surewarehk_Dsa_Sign = NULL;
-	p_surewarehk_Info_Pubkey = NULL;
-	p_surewarehk_Load_Dsa_Pubkey = NULL;
-	p_surewarehk_Mod_Exp = NULL;
-	return 0;
-}
-
-static int surewarehk_finish(ENGINE *e)
-{
-	int to_return = 1;
-	if(surewarehk_dso == NULL)
-		{
-		SUREWAREerr(SUREWARE_F_SUREWAREHK_FINISH,ENGINE_R_NOT_LOADED);
-		to_return = 0;
-		goto err;
-		}
-	p_surewarehk_Finish();
-	if(!DSO_free(surewarehk_dso))
-		{
-		SUREWAREerr(SUREWARE_F_SUREWAREHK_FINISH,ENGINE_R_DSO_FAILURE);
-		to_return = 0;
-		goto err;
-		}
- err:
-	if (logstream)
-		BIO_free(logstream);
-	surewarehk_dso = NULL;
-	p_surewarehk_Init = NULL;
-	p_surewarehk_Finish = NULL;
-	p_surewarehk_Rand_Bytes = NULL;
-	p_surewarehk_Rand_Seed = NULL;
-	p_surewarehk_Load_Privkey = NULL;
-	p_surewarehk_Load_Rsa_Pubkey = NULL;
-	p_surewarehk_Free = NULL;
-	p_surewarehk_Rsa_Priv_Dec = NULL;
-	p_surewarehk_Rsa_Sign = NULL;
-	p_surewarehk_Dsa_Sign = NULL;
-	p_surewarehk_Info_Pubkey = NULL;
-	p_surewarehk_Load_Dsa_Pubkey = NULL;
-	p_surewarehk_Mod_Exp = NULL;
-	return to_return;
-}
-
-static void surewarehk_error_handling(char *const msg,int func,int ret)
-{
-	switch (ret)
-	{
-		case SUREWAREHOOK_ERROR_UNIT_FAILURE:
-			ENGINEerr(func,SUREWARE_R_UNIT_FAILURE);
-			break;
-		case SUREWAREHOOK_ERROR_FALLBACK:
-			ENGINEerr(func,SUREWARE_R_REQUEST_FALLBACK);
-			break;
-		case SUREWAREHOOK_ERROR_DATA_SIZE:
-			ENGINEerr(func,SUREWARE_R_SIZE_TOO_LARGE_OR_TOO_SMALL);
-			break;
-		case SUREWAREHOOK_ERROR_INVALID_PAD:
-			ENGINEerr(func,RSA_R_PADDING_CHECK_FAILED);
-			break;
-		default:
-			ENGINEerr(func,SUREWARE_R_REQUEST_FAILED);
-			break;
-		case 1:/*nothing*/
-			msg[0]='\0';
-	}
-	if (*msg)
-	{
-		ERR_add_error_data(1,msg);
-		if (logstream)
-		{
-			CRYPTO_w_lock(CRYPTO_LOCK_BIO);
-			BIO_write(logstream, msg, strlen(msg));
-			CRYPTO_w_unlock(CRYPTO_LOCK_BIO);
-		}
-	}
-}
-
-static int surewarehk_rand_bytes(unsigned char *buf, int num)
-{
-	int ret=0;
-	char msg[64]="ENGINE_rand_bytes";
-	if(!p_surewarehk_Rand_Bytes)
-	{
-		SUREWAREerr(SUREWARE_F_SUREWAREHK_RAND_BYTES,ENGINE_R_NOT_INITIALISED);
-	}
-	else
-	{
-		ret = p_surewarehk_Rand_Bytes(msg,buf, num);
-		surewarehk_error_handling(msg,SUREWARE_F_SUREWAREHK_RAND_BYTES,ret);
-	}
-	return ret==1 ? 1 : 0;
-}
-
-static void surewarehk_rand_seed(const void *buf, int num)
-{
-	int ret=0;
-	char msg[64]="ENGINE_rand_seed";
-	if(!p_surewarehk_Rand_Seed)
-	{
-		SUREWAREerr(SUREWARE_F_SUREWAREHK_RAND_SEED,ENGINE_R_NOT_INITIALISED);
-	}
-	else
-	{
-		ret = p_surewarehk_Rand_Seed(msg,buf, num);
-		surewarehk_error_handling(msg,SUREWARE_F_SUREWAREHK_RAND_SEED,ret);
-	}
-}
-
-static void surewarehk_rand_add(const void *buf, int num, double entropy)
-{
-	surewarehk_rand_seed(buf,num);
-}
-
-static EVP_PKEY* sureware_load_public(ENGINE *e,const char *key_id,char *hptr,unsigned long el,char keytype)
-{
-	EVP_PKEY *res = NULL;
-#ifndef OPENSSL_NO_RSA
-	RSA *rsatmp = NULL;
-#endif
-#ifndef OPENSSL_NO_DSA
-	DSA *dsatmp=NULL;
-#endif
-	char msg[64]="sureware_load_public";
-	int ret=0;
-	if(!p_surewarehk_Load_Rsa_Pubkey || !p_surewarehk_Load_Dsa_Pubkey)
-	{
-		SUREWAREerr(SUREWARE_F_SUREWAREHK_LOAD_PUBLIC_KEY,ENGINE_R_NOT_INITIALISED);
-		goto err;
-	}
-	switch (keytype)
-	{
-#ifndef OPENSSL_NO_RSA
-	case 1: /*RSA*/
-		/* set private external reference */
-		rsatmp = RSA_new_method(e);
-		RSA_set_ex_data(rsatmp,rsaHndidx,hptr);
-		rsatmp->flags |= RSA_FLAG_EXT_PKEY;
-
-		/* set public big nums*/
-		rsatmp->e = BN_new();
-		rsatmp->n = BN_new();
-		bn_expand2(rsatmp->e, el/sizeof(BN_ULONG));
-		bn_expand2(rsatmp->n, el/sizeof(BN_ULONG));
-		if (!rsatmp->e || rsatmp->e->dmax!=(int)(el/sizeof(BN_ULONG))|| 
-			!rsatmp->n || rsatmp->n->dmax!=(int)(el/sizeof(BN_ULONG)))
-			goto err;
-		ret=p_surewarehk_Load_Rsa_Pubkey(msg,key_id,el,
-						 (unsigned long *)rsatmp->n->d,
-						 (unsigned long *)rsatmp->e->d);
-		surewarehk_error_handling(msg,SUREWARE_F_SUREWAREHK_LOAD_PUBLIC_KEY,ret);
-		if (ret!=1)
-		{
-			SUREWAREerr(SUREWARE_F_SUREWAREHK_LOAD_PRIVATE_KEY,ENGINE_R_FAILED_LOADING_PUBLIC_KEY);
-			goto err;
-		}
-		/* normalise pub e and pub n */
-		rsatmp->e->top=el/sizeof(BN_ULONG);
-		bn_fix_top(rsatmp->e);
-		rsatmp->n->top=el/sizeof(BN_ULONG);
-		bn_fix_top(rsatmp->n);
-		/* create an EVP object: engine + rsa key */
-		res = EVP_PKEY_new();
-		EVP_PKEY_assign_RSA(res, rsatmp);
-		break;
-#endif
-
-#ifndef OPENSSL_NO_DSA
-	case 2:/*DSA*/
-		/* set private/public external reference */
-		dsatmp = DSA_new_method(e);
-		DSA_set_ex_data(dsatmp,dsaHndidx,hptr);
-		/*dsatmp->flags |= DSA_FLAG_EXT_PKEY;*/
-
-		/* set public key*/
-		dsatmp->pub_key = BN_new();
-		dsatmp->p = BN_new();
-		dsatmp->q = BN_new();
-		dsatmp->g = BN_new();
-		bn_expand2(dsatmp->pub_key, el/sizeof(BN_ULONG));
-		bn_expand2(dsatmp->p, el/sizeof(BN_ULONG));
-		bn_expand2(dsatmp->q, 20/sizeof(BN_ULONG));
-		bn_expand2(dsatmp->g, el/sizeof(BN_ULONG));
-		if (!dsatmp->pub_key || dsatmp->pub_key->dmax!=(int)(el/sizeof(BN_ULONG))|| 
-			!dsatmp->p || dsatmp->p->dmax!=(int)(el/sizeof(BN_ULONG)) ||
-			!dsatmp->q || dsatmp->q->dmax!=20/sizeof(BN_ULONG) ||
-			!dsatmp->g || dsatmp->g->dmax!=(int)(el/sizeof(BN_ULONG)))
-			goto err;
-
-		ret=p_surewarehk_Load_Dsa_Pubkey(msg,key_id,el,
-						 (unsigned long *)dsatmp->pub_key->d, 
-						 (unsigned long *)dsatmp->p->d,
-						 (unsigned long *)dsatmp->q->d,
-						 (unsigned long *)dsatmp->g->d);
-		surewarehk_error_handling(msg,SUREWARE_F_SUREWAREHK_LOAD_PUBLIC_KEY,ret);
-		if (ret!=1)
-		{
-			SUREWAREerr(SUREWARE_F_SUREWAREHK_LOAD_PRIVATE_KEY,ENGINE_R_FAILED_LOADING_PUBLIC_KEY);
-			goto err;
-		}
-		/* set parameters */
-		/* normalise pubkey and parameters in case of */
-		dsatmp->pub_key->top=el/sizeof(BN_ULONG);
-		bn_fix_top(dsatmp->pub_key);
-		dsatmp->p->top=el/sizeof(BN_ULONG);
-		bn_fix_top(dsatmp->p);
-		dsatmp->q->top=20/sizeof(BN_ULONG);
-		bn_fix_top(dsatmp->q);
-		dsatmp->g->top=el/sizeof(BN_ULONG);
-		bn_fix_top(dsatmp->g);
-
-		/* create an EVP object: engine + rsa key */
-		res = EVP_PKEY_new();
-		EVP_PKEY_assign_DSA(res, dsatmp);
-		break;
-#endif
-
-	default:
-		SUREWAREerr(SUREWARE_F_SUREWAREHK_LOAD_PRIVATE_KEY,ENGINE_R_FAILED_LOADING_PRIVATE_KEY);
-		goto err;
-	}
-	return res;
- err:
-	if (res)
-		EVP_PKEY_free(res);
-#ifndef OPENSSL_NO_RSA
-	if (rsatmp)
-		RSA_free(rsatmp);
-#endif
-#ifndef OPENSSL_NO_DSA
-	if (dsatmp)
-		DSA_free(dsatmp);
-#endif
-	return NULL;
-}
-
-static EVP_PKEY *surewarehk_load_privkey(ENGINE *e, const char *key_id,
-					 UI_METHOD *ui_method, void *callback_data)
-{
-	EVP_PKEY *res = NULL;
-	int ret=0;
-	unsigned long el=0;
-	char *hptr=NULL;
-	char keytype=0;
-	char msg[64]="ENGINE_load_privkey";
-
-	if(!p_surewarehk_Load_Privkey)
-	{
-		SUREWAREerr(SUREWARE_F_SUREWAREHK_LOAD_PRIVATE_KEY,ENGINE_R_NOT_INITIALISED);
-	}
-	else
-	{
-		ret=p_surewarehk_Load_Privkey(msg,key_id,&hptr,&el,&keytype);
-		if (ret!=1)
-		{
-			SUREWAREerr(SUREWARE_F_SUREWAREHK_LOAD_PRIVATE_KEY,ENGINE_R_FAILED_LOADING_PRIVATE_KEY);
-			ERR_add_error_data(1,msg);		
-		}
-		else
-			res=sureware_load_public(e,key_id,hptr,el,keytype);
-	}
-	return res;
-}
-
-static EVP_PKEY *surewarehk_load_pubkey(ENGINE *e, const char *key_id,
-					 UI_METHOD *ui_method, void *callback_data)
-{
-	EVP_PKEY *res = NULL;
-	int ret=0;
-	unsigned long el=0;
-	char *hptr=NULL;
-	char keytype=0;
-	char msg[64]="ENGINE_load_pubkey";
-
-	if(!p_surewarehk_Info_Pubkey)
-	{
-		SUREWAREerr(SUREWARE_F_SUREWAREHK_LOAD_PUBLIC_KEY,ENGINE_R_NOT_INITIALISED);
-	}
-	else
-	{
-		/* call once to identify if DSA or RSA */
-		ret=p_surewarehk_Info_Pubkey(msg,key_id,&el,&keytype);
-		if (ret!=1)
-		{
-			SUREWAREerr(SUREWARE_F_SUREWAREHK_LOAD_PUBLIC_KEY,ENGINE_R_FAILED_LOADING_PUBLIC_KEY);
-			ERR_add_error_data(1,msg);
-		}
-		else
-			res=sureware_load_public(e,key_id,hptr,el,keytype);
-	}
-	return res;
-}
-
-/* This cleans up an RSA/DSA KM key(do not destroy the key into the hardware)
-, called when ex_data is freed */
-static void surewarehk_ex_free(void *obj, void *item, CRYPTO_EX_DATA *ad,
-	int idx,long argl, void *argp)
-{
-	if(!p_surewarehk_Free)
-	{
-		SUREWAREerr(SUREWARE_F_SUREWAREHK_EX_FREE,ENGINE_R_NOT_INITIALISED);
-	}
-	else
-		p_surewarehk_Free((char *)item,0);
-}
-
-#if 0
-/* This cleans up an DH KM key (destroys the key into hardware), 
-called when ex_data is freed */
-static void surewarehk_dh_ex_free(void *obj, void *item, CRYPTO_EX_DATA *ad,
-	int idx,long argl, void *argp)
-{
-	if(!p_surewarehk_Free)
-	{
-		SUREWAREerr(SUREWARE_F_SUREWAREHK_EX_FREE,ENGINE_R_NOT_INITIALISED);
-	}
-	else
-		p_surewarehk_Free((char *)item,1);
-}
-#endif
-
-/*
-* return number of decrypted bytes
-*/
-#ifndef OPENSSL_NO_RSA
-static int surewarehk_rsa_priv_dec(int flen,const unsigned char *from,unsigned char *to,
-			RSA *rsa,int padding)
-{
-	int ret=0,tlen;
-	char *buf=NULL,*hptr=NULL;
-	char msg[64]="ENGINE_rsa_priv_dec";
-	if (!p_surewarehk_Rsa_Priv_Dec)
-	{
-		SUREWAREerr(SUREWARE_F_SUREWAREHK_RSA_PRIV_DEC,ENGINE_R_NOT_INITIALISED);
-	}
-	/* extract ref to private key */
-	else if (!(hptr=RSA_get_ex_data(rsa, rsaHndidx)))
-	{
-		SUREWAREerr(SUREWARE_F_SUREWAREHK_RSA_PRIV_DEC,SUREWARE_R_MISSING_KEY_COMPONENTS);
-		goto err;
-	}
-	/* analyse what padding we can do into the hardware */
-	if (padding==RSA_PKCS1_PADDING)
-	{
-		/* do it one shot */
-		ret=p_surewarehk_Rsa_Priv_Dec(msg,flen,(unsigned char *)from,&tlen,to,hptr,SUREWARE_PKCS1_PAD);
-		surewarehk_error_handling(msg,SUREWARE_F_SUREWAREHK_RSA_PRIV_DEC,ret);
-		if (ret!=1)
-			goto err;
-		ret=tlen;
-	}
-	else /* do with no padding into hardware */
-	{
-		ret=p_surewarehk_Rsa_Priv_Dec(msg,flen,(unsigned char *)from,&tlen,to,hptr,SUREWARE_NO_PAD);
-		surewarehk_error_handling(msg,SUREWARE_F_SUREWAREHK_RSA_PRIV_DEC,ret);
-		if (ret!=1)
-			goto err;
-		/* intermediate buffer for padding */
-		if ((buf=OPENSSL_malloc(tlen)) == NULL)
-		{
-			RSAerr(SUREWARE_F_SUREWAREHK_RSA_PRIV_DEC,ERR_R_MALLOC_FAILURE);
-			goto err;
-		}
-		memcpy(buf,to,tlen);/* transfert to into buf */
-		switch (padding) /* check padding in software */
-		{
-#ifndef OPENSSL_NO_SHA
-		case RSA_PKCS1_OAEP_PADDING:
-			ret=RSA_padding_check_PKCS1_OAEP(to,tlen,(unsigned char *)buf,tlen,tlen,NULL,0);
-			break;
-#endif
- 		case RSA_SSLV23_PADDING:
-			ret=RSA_padding_check_SSLv23(to,tlen,(unsigned char *)buf,flen,tlen);
-			break;
-		case RSA_NO_PADDING:
-			ret=RSA_padding_check_none(to,tlen,(unsigned char *)buf,flen,tlen);
-			break;
-		default:
-			RSAerr(SUREWARE_F_SUREWAREHK_RSA_PRIV_DEC,RSA_R_UNKNOWN_PADDING_TYPE);
-			goto err;
-		}
-		if (ret < 0)
-			RSAerr(SUREWARE_F_SUREWAREHK_RSA_PRIV_DEC,RSA_R_PADDING_CHECK_FAILED);
-	}
-err:
-	if (buf)
-	{
-		OPENSSL_cleanse(buf,tlen);
-		OPENSSL_free(buf);
-	}
-	return ret;
-}
-
-/*
-* Does what OpenSSL rsa_priv_enc does.
-*/
-static int surewarehk_rsa_sign(int flen,const unsigned char *from,unsigned char *to,
-			    RSA *rsa,int padding)
-{
-	int ret=0,tlen;
-	char *hptr=NULL;
-	char msg[64]="ENGINE_rsa_sign";
-	if (!p_surewarehk_Rsa_Sign)
-	{
-		SUREWAREerr(SUREWARE_F_SUREWAREHK_RSA_PRIV_ENC,ENGINE_R_NOT_INITIALISED);
-	}
-	/* extract ref to private key */
-	else if (!(hptr=RSA_get_ex_data(rsa, rsaHndidx)))
-	{
-		SUREWAREerr(SUREWARE_F_SUREWAREHK_RSA_PRIV_ENC,SUREWARE_R_MISSING_KEY_COMPONENTS);
-	}
-	else
-	{
-		switch (padding)
-		{
-		case RSA_PKCS1_PADDING: /* do it in one shot */
-			ret=p_surewarehk_Rsa_Sign(msg,flen,(unsigned char *)from,&tlen,to,hptr,SUREWARE_PKCS1_PAD);
-			surewarehk_error_handling(msg,SUREWARE_F_SUREWAREHK_RSA_PRIV_ENC,ret);
-			break;
-		case RSA_NO_PADDING:
-		default:
-			RSAerr(SUREWARE_F_SUREWAREHK_RSA_PRIV_ENC,RSA_R_UNKNOWN_PADDING_TYPE);
-		}
-	}
-	return ret==1 ? tlen : ret;
-}
-
-#endif
-
-#ifndef OPENSSL_NO_DSA
-/* DSA sign and verify */
-static	DSA_SIG * surewarehk_dsa_do_sign(const unsigned char *from, int flen, DSA *dsa)
-{
-	int ret=0;
-	char *hptr=NULL;
-	DSA_SIG *psign=NULL;
-	char msg[64]="ENGINE_dsa_do_sign";
-	if (!p_surewarehk_Dsa_Sign)
-	{
-		SUREWAREerr(SUREWARE_F_SUREWAREHK_DSA_DO_SIGN,ENGINE_R_NOT_INITIALISED);
-	}
-	/* extract ref to private key */
-	else if (!(hptr=DSA_get_ex_data(dsa, dsaHndidx)))
-	{
-		SUREWAREerr(SUREWARE_F_SUREWAREHK_DSA_DO_SIGN,SUREWARE_R_MISSING_KEY_COMPONENTS);
-	}
-	else
-	{
-		if((psign = DSA_SIG_new()) == NULL)
-		{
-			SUREWAREerr(SUREWARE_F_SUREWAREHK_DSA_DO_SIGN,ERR_R_MALLOC_FAILURE);
-			goto err;
-		}
-		psign->r=BN_new();
-		psign->s=BN_new();
-		bn_expand2(psign->r, 20/sizeof(BN_ULONG));
-		bn_expand2(psign->s, 20/sizeof(BN_ULONG));
-		if (!psign->r || psign->r->dmax!=20/sizeof(BN_ULONG) ||
-			!psign->s || psign->s->dmax!=20/sizeof(BN_ULONG))
-			goto err;
-		ret=p_surewarehk_Dsa_Sign(msg,flen,from,
-					  (unsigned long *)psign->r->d,
-					  (unsigned long *)psign->s->d,
-					  hptr);
-		surewarehk_error_handling(msg,SUREWARE_F_SUREWAREHK_DSA_DO_SIGN,ret);
-	}
-	psign->r->top=20/sizeof(BN_ULONG);
-	bn_fix_top(psign->r);
-	psign->s->top=20/sizeof(BN_ULONG);
-	bn_fix_top(psign->s);
-
-err:	
-	if (psign)
-	{
-		DSA_SIG_free(psign);
-		psign=NULL;
-	}
-	return psign;
-}
-#endif
-
-static int surewarehk_modexp(BIGNUM *r, const BIGNUM *a, const BIGNUM *p,
-			     const BIGNUM *m, BN_CTX *ctx)
-{
-	int ret=0;
-	char msg[64]="ENGINE_modexp";
-	if (!p_surewarehk_Mod_Exp)
-	{
-		SUREWAREerr(SUREWARE_F_SUREWAREHK_MOD_EXP,ENGINE_R_NOT_INITIALISED);
-	}
-	else
-	{
-		bn_expand2(r,m->top);
-		if (r && r->dmax==m->top)
-		{
-			/* do it*/
-			ret=p_surewarehk_Mod_Exp(msg,
-						 m->top*sizeof(BN_ULONG),
-						 (unsigned long *)m->d,
-						 p->top*sizeof(BN_ULONG),
-						 (unsigned long *)p->d,
-						 a->top*sizeof(BN_ULONG),
-						 (unsigned long *)a->d,
-						 (unsigned long *)r->d);
-			surewarehk_error_handling(msg,SUREWARE_F_SUREWAREHK_MOD_EXP,ret);
-			if (ret==1)
-			{
-				/* normalise result */
-				r->top=m->top;
-				bn_fix_top(r);
-			}
-		}
-	}
-	return ret;
-}
-#endif /* !OPENSSL_NO_HW_SureWare */
-#endif /* !OPENSSL_NO_HW */
diff --git a/crypto/openssl/crypto/engine/hw_sureware_err.c b/crypto/openssl/crypto/engine/hw_sureware_err.c
deleted file mode 100644
index 69955dadbb90..000000000000
--- a/crypto/openssl/crypto/engine/hw_sureware_err.c
+++ /dev/null
@@ -1,150 +0,0 @@
-/* hw_sureware_err.c */
-/* ====================================================================
- * Copyright (c) 1999 The OpenSSL Project.  All rights reserved.
- *
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions
- * are met:
- *
- * 1. Redistributions of source code must retain the above copyright
- *    notice, this list of conditions and the following disclaimer. 
- *
- * 2. Redistributions in binary form must reproduce the above copyright
- *    notice, this list of conditions and the following disclaimer in
- *    the documentation and/or other materials provided with the
- *    distribution.
- *
- * 3. All advertising materials mentioning features or use of this
- *    software must display the following acknowledgment:
- *    "This product includes software developed by the OpenSSL Project
- *    for use in the OpenSSL Toolkit. (http://www.OpenSSL.org/)"
- *
- * 4. The names "OpenSSL Toolkit" and "OpenSSL Project" must not be used to
- *    endorse or promote products derived from this software without
- *    prior written permission. For written permission, please contact
- *    openssl-core@OpenSSL.org.
- *
- * 5. Products derived from this software may not be called "OpenSSL"
- *    nor may "OpenSSL" appear in their names without prior written
- *    permission of the OpenSSL Project.
- *
- * 6. Redistributions of any form whatsoever must retain the following
- *    acknowledgment:
- *    "This product includes software developed by the OpenSSL Project
- *    for use in the OpenSSL Toolkit (http://www.OpenSSL.org/)"
- *
- * THIS SOFTWARE IS PROVIDED BY THE OpenSSL PROJECT ``AS IS'' AND ANY
- * EXPRESSED OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
- * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR
- * PURPOSE ARE DISCLAIMED.  IN NO EVENT SHALL THE OpenSSL PROJECT OR
- * ITS CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
- * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
- * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
- * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
- * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
- * STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
- * ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED
- * OF THE POSSIBILITY OF SUCH DAMAGE.
- * ====================================================================
- *
- * This product includes cryptographic software written by Eric Young
- * (eay@cryptsoft.com).  This product includes software written by Tim
- * Hudson (tjh@cryptsoft.com).
- *
- */
-
-/* NOTE: this file was auto generated by the mkerr.pl script: any changes
- * made to it will be overwritten when the script next updates this file,
- * only reason strings will be preserved.
- */
-
-#include <stdio.h>
-#include <openssl/err.h>
-#include "hw_sureware_err.h"
-
-/* BEGIN ERROR CODES */
-#ifndef OPENSSL_NO_ERR
-static ERR_STRING_DATA SUREWARE_str_functs[]=
-	{
-{ERR_PACK(0,SUREWARE_F_SUREWAREHK_CTRL,0),	"SUREWAREHK_CTRL"},
-{ERR_PACK(0,SUREWARE_F_SUREWAREHK_DSA_DO_SIGN,0),	"SUREWAREHK_DSA_DO_SIGN"},
-{ERR_PACK(0,SUREWARE_F_SUREWAREHK_EX_FREE,0),	"SUREWAREHK_EX_FREE"},
-{ERR_PACK(0,SUREWARE_F_SUREWAREHK_FINISH,0),	"SUREWAREHK_FINISH"},
-{ERR_PACK(0,SUREWARE_F_SUREWAREHK_INIT,0),	"SUREWAREHK_INIT"},
-{ERR_PACK(0,SUREWARE_F_SUREWAREHK_LOAD_PRIVATE_KEY,0),	"SUREWAREHK_LOAD_PRIVATE_KEY"},
-{ERR_PACK(0,SUREWARE_F_SUREWAREHK_LOAD_PUBLIC_KEY,0),	"SUREWAREHK_LOAD_PUBLIC_KEY"},
-{ERR_PACK(0,SUREWARE_F_SUREWAREHK_MOD_EXP,0),	"SUREWAREHK_MOD_EXP"},
-{ERR_PACK(0,SUREWARE_F_SUREWAREHK_RAND_BYTES,0),	"SUREWAREHK_RAND_BYTES"},
-{ERR_PACK(0,SUREWARE_F_SUREWAREHK_RAND_SEED,0),	"SUREWAREHK_RAND_SEED"},
-{ERR_PACK(0,SUREWARE_F_SUREWAREHK_RSA_PRIV_DEC,0),	"SUREWAREHK_RSA_PRIV_DEC"},
-{ERR_PACK(0,SUREWARE_F_SUREWAREHK_RSA_PRIV_ENC,0),	"SUREWAREHK_RSA_PRIV_ENC"},
-{0,NULL}
-	};
-
-static ERR_STRING_DATA SUREWARE_str_reasons[]=
-	{
-{SUREWARE_R_BIO_WAS_FREED                ,"bio was freed"},
-{SUREWARE_R_MISSING_KEY_COMPONENTS       ,"missing key components"},
-{SUREWARE_R_REQUEST_FAILED               ,"request failed"},
-{SUREWARE_R_REQUEST_FALLBACK             ,"request fallback"},
-{SUREWARE_R_SIZE_TOO_LARGE_OR_TOO_SMALL  ,"size too large or too small"},
-{SUREWARE_R_UNIT_FAILURE                 ,"unit failure"},
-{0,NULL}
-	};
-
-#endif
-
-#ifdef SUREWARE_LIB_NAME
-static ERR_STRING_DATA SUREWARE_lib_name[]=
-        {
-{0	,SUREWARE_LIB_NAME},
-{0,NULL}
-	};
-#endif
-
-
-static int SUREWARE_lib_error_code=0;
-static int SUREWARE_error_init=1;
-
-static void ERR_load_SUREWARE_strings(void)
-	{
-	if (SUREWARE_lib_error_code == 0)
-		SUREWARE_lib_error_code=ERR_get_next_error_library();
-
-	if (SUREWARE_error_init)
-		{
-		SUREWARE_error_init=0;
-#ifndef OPENSSL_NO_ERR
-		ERR_load_strings(SUREWARE_lib_error_code,SUREWARE_str_functs);
-		ERR_load_strings(SUREWARE_lib_error_code,SUREWARE_str_reasons);
-#endif
-
-#ifdef SUREWARE_LIB_NAME
-		SUREWARE_lib_name->error = ERR_PACK(SUREWARE_lib_error_code,0,0);
-		ERR_load_strings(0,SUREWARE_lib_name);
-#endif
-		}
-	}
-
-static void ERR_unload_SUREWARE_strings(void)
-	{
-	if (SUREWARE_error_init == 0)
-		{
-#ifndef OPENSSL_NO_ERR
-		ERR_unload_strings(SUREWARE_lib_error_code,SUREWARE_str_functs);
-		ERR_unload_strings(SUREWARE_lib_error_code,SUREWARE_str_reasons);
-#endif
-
-#ifdef SUREWARE_LIB_NAME
-		ERR_unload_strings(0,SUREWARE_lib_name);
-#endif
-		SUREWARE_error_init=1;
-		}
-	}
-
-static void ERR_SUREWARE_error(int function, int reason, char *file, int line)
-	{
-	if (SUREWARE_lib_error_code == 0)
-		SUREWARE_lib_error_code=ERR_get_next_error_library();
-	ERR_PUT_error(SUREWARE_lib_error_code,function,reason,file,line);
-	}
diff --git a/crypto/openssl/crypto/engine/hw_sureware_err.h b/crypto/openssl/crypto/engine/hw_sureware_err.h
deleted file mode 100644
index bc52af5e05d0..000000000000
--- a/crypto/openssl/crypto/engine/hw_sureware_err.h
+++ /dev/null
@@ -1,94 +0,0 @@
-/* ====================================================================
- * Copyright (c) 2001 The OpenSSL Project.  All rights reserved.
- *
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions
- * are met:
- *
- * 1. Redistributions of source code must retain the above copyright
- *    notice, this list of conditions and the following disclaimer. 
- *
- * 2. Redistributions in binary form must reproduce the above copyright
- *    notice, this list of conditions and the following disclaimer in
- *    the documentation and/or other materials provided with the
- *    distribution.
- *
- * 3. All advertising materials mentioning features or use of this
- *    software must display the following acknowledgment:
- *    "This product includes software developed by the OpenSSL Project
- *    for use in the OpenSSL Toolkit. (http://www.openssl.org/)"
- *
- * 4. The names "OpenSSL Toolkit" and "OpenSSL Project" must not be used to
- *    endorse or promote products derived from this software without
- *    prior written permission. For written permission, please contact
- *    openssl-core@openssl.org.
- *
- * 5. Products derived from this software may not be called "OpenSSL"
- *    nor may "OpenSSL" appear in their names without prior written
- *    permission of the OpenSSL Project.
- *
- * 6. Redistributions of any form whatsoever must retain the following
- *    acknowledgment:
- *    "This product includes software developed by the OpenSSL Project
- *    for use in the OpenSSL Toolkit (http://www.openssl.org/)"
- *
- * THIS SOFTWARE IS PROVIDED BY THE OpenSSL PROJECT ``AS IS'' AND ANY
- * EXPRESSED OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
- * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR
- * PURPOSE ARE DISCLAIMED.  IN NO EVENT SHALL THE OpenSSL PROJECT OR
- * ITS CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
- * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
- * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
- * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
- * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
- * STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
- * ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED
- * OF THE POSSIBILITY OF SUCH DAMAGE.
- * ====================================================================
- *
- * This product includes cryptographic software written by Eric Young
- * (eay@cryptsoft.com).  This product includes software written by Tim
- * Hudson (tjh@cryptsoft.com).
- *
- */
-
-#ifndef HEADER_SUREWARE_ERR_H
-#define HEADER_SUREWARE_ERR_H
-
-/* BEGIN ERROR CODES */
-/* The following lines are auto generated by the script mkerr.pl. Any changes
- * made after this point may be overwritten when the script is next run.
- */
-static void ERR_load_SUREWARE_strings(void);
-static void ERR_unload_SUREWARE_strings(void);
-static void ERR_SUREWARE_error(int function, int reason, char *file, int line);
-#define SUREWAREerr(f,r) ERR_SUREWARE_error((f),(r),__FILE__,__LINE__)
-
-/* Error codes for the SUREWARE functions. */
-
-/* Function codes. */
-#define SUREWARE_F_SUREWAREHK_CTRL			 100
-#define SUREWARE_F_SUREWAREHK_DSA_DO_SIGN		 101
-#define SUREWARE_F_SUREWAREHK_EX_FREE			 102
-#define SUREWARE_F_SUREWAREHK_FINISH			 103
-#define SUREWARE_F_SUREWAREHK_INIT			 104
-#define SUREWARE_F_SUREWAREHK_LOAD_PRIVATE_KEY		 105
-#define SUREWARE_F_SUREWAREHK_LOAD_PUBLIC_KEY		 106
-#define SUREWARE_F_SUREWAREHK_MOD_EXP			 107
-#define SUREWARE_F_SUREWAREHK_RAND_BYTES		 108
-#define SUREWARE_F_SUREWAREHK_RAND_SEED			 109
-#define SUREWARE_F_SUREWAREHK_RSA_PRIV_DEC		 110
-#define SUREWARE_F_SUREWAREHK_RSA_PRIV_ENC		 111
-
-/* Reason codes. */
-#define SUREWARE_R_BIO_WAS_FREED			 100
-#define SUREWARE_R_MISSING_KEY_COMPONENTS		 105
-#define SUREWARE_R_REQUEST_FAILED			 101
-#define SUREWARE_R_REQUEST_FALLBACK			 102
-#define SUREWARE_R_SIZE_TOO_LARGE_OR_TOO_SMALL		 103
-#define SUREWARE_R_UNIT_FAILURE				 104
-
-#ifdef  __cplusplus
-}
-#endif
-#endif
diff --git a/crypto/openssl/crypto/engine/hw_ubsec.c b/crypto/openssl/crypto/engine/hw_ubsec.c
deleted file mode 100644
index 5234a08a07bd..000000000000
--- a/crypto/openssl/crypto/engine/hw_ubsec.c
+++ /dev/null
@@ -1,1060 +0,0 @@
-/* crypto/engine/hw_ubsec.c */
-/* Written by Geoff Thorpe (geoff@geoffthorpe.net) for the OpenSSL
- * project 2000.
- *
- * Cloned shamelessly by Joe Tardo. 
- */
-/* ====================================================================
- * Copyright (c) 1999-2001 The OpenSSL Project.  All rights reserved.
- *
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions
- * are met:
- *
- * 1. Redistributions of source code must retain the above copyright
- *    notice, this list of conditions and the following disclaimer. 
- *
- * 2. Redistributions in binary form must reproduce the above copyright
- *    notice, this list of conditions and the following disclaimer in
- *    the documentation and/or other materials provided with the
- *    distribution.
- *
- * 3. All advertising materials mentioning features or use of this
- *    software must display the following acknowledgment:
- *    "This product includes software developed by the OpenSSL Project
- *    for use in the OpenSSL Toolkit. (http://www.OpenSSL.org/)"
- *
- * 4. The names "OpenSSL Toolkit" and "OpenSSL Project" must not be used to
- *    endorse or promote products derived from this software without
- *    prior written permission. For written permission, please contact
- *    licensing@OpenSSL.org.
- *
- * 5. Products derived from this software may not be called "OpenSSL"
- *    nor may "OpenSSL" appear in their names without prior written
- *    permission of the OpenSSL Project.
- *
- * 6. Redistributions of any form whatsoever must retain the following
- *    acknowledgment:
- *    "This product includes software developed by the OpenSSL Project
- *    for use in the OpenSSL Toolkit (http://www.OpenSSL.org/)"
- *
- * THIS SOFTWARE IS PROVIDED BY THE OpenSSL PROJECT ``AS IS'' AND ANY
- * EXPRESSED OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
- * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR
- * PURPOSE ARE DISCLAIMED.  IN NO EVENT SHALL THE OpenSSL PROJECT OR
- * ITS CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
- * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
- * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
- * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
- * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
- * STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
- * ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED
- * OF THE POSSIBILITY OF SUCH DAMAGE.
- * ====================================================================
- *
- * This product includes cryptographic software written by Eric Young
- * (eay@cryptsoft.com).  This product includes software written by Tim
- * Hudson (tjh@cryptsoft.com).
- *
- */
-
-#include <stdio.h>
-#include <openssl/crypto.h>
-#include "cryptlib.h"
-#include <openssl/dso.h>
-#include <openssl/engine.h>
-
-#ifndef OPENSSL_NO_HW
-#ifndef OPENSSL_NO_HW_UBSEC
-
-#ifdef FLAT_INC
-#include "hw_ubsec.h"
-#else
-#include "vendor_defns/hw_ubsec.h"
-#endif
-
-#define UBSEC_LIB_NAME "ubsec engine"
-#include "hw_ubsec_err.c"
-
-#define FAIL_TO_SOFTWARE -15
-
-static int ubsec_destroy(ENGINE *e);
-static int ubsec_init(ENGINE *e);
-static int ubsec_finish(ENGINE *e);
-static int ubsec_ctrl(ENGINE *e, int cmd, long i, void *p, void (*f)());
-static int ubsec_mod_exp(BIGNUM *r, const BIGNUM *a, const BIGNUM *p,
-		const BIGNUM *m, BN_CTX *ctx);
-static int ubsec_mod_exp_crt(BIGNUM *r, const BIGNUM *a, const BIGNUM *p,
-			const BIGNUM *q, const BIGNUM *dp,
-			const BIGNUM *dq, const BIGNUM *qinv, BN_CTX *ctx);
-#ifndef OPENSSL_NO_RSA
-static int ubsec_rsa_mod_exp(BIGNUM *r0, const BIGNUM *I, RSA *rsa);
-#endif
-static int ubsec_mod_exp_mont(BIGNUM *r, const BIGNUM *a, const BIGNUM *p,
-		const BIGNUM *m, BN_CTX *ctx, BN_MONT_CTX *m_ctx);
-#ifndef OPENSSL_NO_DSA
-#ifdef NOT_USED
-static int ubsec_dsa_mod_exp(DSA *dsa, BIGNUM *rr, BIGNUM *a1,
-		BIGNUM *p1, BIGNUM *a2, BIGNUM *p2, BIGNUM *m,
-		BN_CTX *ctx, BN_MONT_CTX *in_mont);
-static int ubsec_mod_exp_dsa(DSA *dsa, BIGNUM *r, BIGNUM *a,
-		const BIGNUM *p, const BIGNUM *m, BN_CTX *ctx,
-		BN_MONT_CTX *m_ctx);
-#endif
-static DSA_SIG *ubsec_dsa_do_sign(const unsigned char *dgst, int dlen, DSA *dsa);
-static int ubsec_dsa_verify(const unsigned char *dgst, int dgst_len,
-                                DSA_SIG *sig, DSA *dsa);
-#endif
-#ifndef OPENSSL_NO_DH
-static int ubsec_mod_exp_dh(const DH *dh, BIGNUM *r, const BIGNUM *a,
-		const BIGNUM *p, const BIGNUM *m, BN_CTX *ctx,
-		BN_MONT_CTX *m_ctx);
-static int ubsec_dh_compute_key(unsigned char *key,const BIGNUM *pub_key,DH *dh);
-static int ubsec_dh_generate_key(DH *dh);
-#endif
-
-#ifdef NOT_USED
-static int ubsec_rand_bytes(unsigned char *buf, int num);
-static int ubsec_rand_status(void);
-#endif
-
-#define UBSEC_CMD_SO_PATH		ENGINE_CMD_BASE
-static const ENGINE_CMD_DEFN ubsec_cmd_defns[] = {
-	{UBSEC_CMD_SO_PATH,
-		"SO_PATH",
-		"Specifies the path to the 'ubsec' shared library",
-		ENGINE_CMD_FLAG_STRING},
-	{0, NULL, NULL, 0}
-	};
-
-#ifndef OPENSSL_NO_RSA
-/* Our internal RSA_METHOD that we provide pointers to */
-static RSA_METHOD ubsec_rsa =
-	{
-	"UBSEC RSA method",
-	NULL,
-	NULL,
-	NULL,
-	NULL,
-	ubsec_rsa_mod_exp,
-	ubsec_mod_exp_mont,
-	NULL,
-	NULL,
-	0,
-	NULL,
-	NULL,
-	NULL
-	};
-#endif
-
-#ifndef OPENSSL_NO_DSA
-/* Our internal DSA_METHOD that we provide pointers to */
-static DSA_METHOD ubsec_dsa =
-	{
-	"UBSEC DSA method",
-	ubsec_dsa_do_sign, /* dsa_do_sign */
-	NULL, /* dsa_sign_setup */
-	ubsec_dsa_verify, /* dsa_do_verify */
-	NULL, /* ubsec_dsa_mod_exp */ /* dsa_mod_exp */
-	NULL, /* ubsec_mod_exp_dsa */ /* bn_mod_exp */
-	NULL, /* init */
-	NULL, /* finish */
-	0, /* flags */
-	NULL /* app_data */
-	};
-#endif
-
-#ifndef OPENSSL_NO_DH
-/* Our internal DH_METHOD that we provide pointers to */
-static DH_METHOD ubsec_dh =
-	{
-	"UBSEC DH method",
-	ubsec_dh_generate_key,
-	ubsec_dh_compute_key,
-	ubsec_mod_exp_dh,
-	NULL,
-	NULL,
-	0,
-	NULL
-	};
-#endif
-
-/* Constants used when creating the ENGINE */
-static const char *engine_ubsec_id = "ubsec";
-static const char *engine_ubsec_name = "UBSEC hardware engine support";
-
-/* This internal function is used by ENGINE_ubsec() and possibly by the
- * "dynamic" ENGINE support too */
-static int bind_helper(ENGINE *e)
-	{
-#ifndef OPENSSL_NO_RSA
-	const RSA_METHOD *meth1;
-#endif
-#ifndef OPENSSL_NO_DH
-#ifndef HAVE_UBSEC_DH
-	const DH_METHOD *meth3;
-#endif /* HAVE_UBSEC_DH */
-#endif
-	if(!ENGINE_set_id(e, engine_ubsec_id) ||
-			!ENGINE_set_name(e, engine_ubsec_name) ||
-#ifndef OPENSSL_NO_RSA
-			!ENGINE_set_RSA(e, &ubsec_rsa) ||
-#endif
-#ifndef OPENSSL_NO_DSA
-			!ENGINE_set_DSA(e, &ubsec_dsa) ||
-#endif
-#ifndef OPENSSL_NO_DH
-			!ENGINE_set_DH(e, &ubsec_dh) ||
-#endif
-			!ENGINE_set_destroy_function(e, ubsec_destroy) ||
-			!ENGINE_set_init_function(e, ubsec_init) ||
-			!ENGINE_set_finish_function(e, ubsec_finish) ||
-			!ENGINE_set_ctrl_function(e, ubsec_ctrl) ||
-			!ENGINE_set_cmd_defns(e, ubsec_cmd_defns))
-		return 0;
-
-#ifndef OPENSSL_NO_RSA
-	/* We know that the "PKCS1_SSLeay()" functions hook properly
-	 * to the Broadcom-specific mod_exp and mod_exp_crt so we use
-	 * those functions. NB: We don't use ENGINE_openssl() or
-	 * anything "more generic" because something like the RSAref
-	 * code may not hook properly, and if you own one of these
-	 * cards then you have the right to do RSA operations on it
-	 * anyway! */ 
-	meth1 = RSA_PKCS1_SSLeay();
-	ubsec_rsa.rsa_pub_enc = meth1->rsa_pub_enc;
-	ubsec_rsa.rsa_pub_dec = meth1->rsa_pub_dec;
-	ubsec_rsa.rsa_priv_enc = meth1->rsa_priv_enc;
-	ubsec_rsa.rsa_priv_dec = meth1->rsa_priv_dec;
-#endif
-
-#ifndef OPENSSL_NO_DH
-#ifndef HAVE_UBSEC_DH
-	/* Much the same for Diffie-Hellman */
-	meth3 = DH_OpenSSL();
-	ubsec_dh.generate_key = meth3->generate_key;
-	ubsec_dh.compute_key = meth3->compute_key;
-#endif /* HAVE_UBSEC_DH */
-#endif
-
-	/* Ensure the ubsec error handling is set up */
-	ERR_load_UBSEC_strings();
-	return 1;
-	}
-
-#ifndef ENGINE_DYNAMIC_SUPPORT
-static ENGINE *engine_ubsec(void)
-	{
-	ENGINE *ret = ENGINE_new();
-	if(!ret)
-		return NULL;
-	if(!bind_helper(ret))
-		{
-		ENGINE_free(ret);
-		return NULL;
-		}
-	return ret;
-	}
-
-void ENGINE_load_ubsec(void)
-	{
-	/* Copied from eng_[openssl|dyn].c */
-	ENGINE *toadd = engine_ubsec();
-	if(!toadd) return;
-	ENGINE_add(toadd);
-	ENGINE_free(toadd);
-	ERR_clear_error();
-	}
-#endif
-
-/* This is a process-global DSO handle used for loading and unloading
- * the UBSEC library. NB: This is only set (or unset) during an
- * init() or finish() call (reference counts permitting) and they're
- * operating with global locks, so this should be thread-safe
- * implicitly. */
-
-static DSO *ubsec_dso = NULL;
-
-/* These are the function pointers that are (un)set when the library has
- * successfully (un)loaded. */
-
-static t_UBSEC_ubsec_bytes_to_bits *p_UBSEC_ubsec_bytes_to_bits = NULL;
-static t_UBSEC_ubsec_bits_to_bytes *p_UBSEC_ubsec_bits_to_bytes = NULL;
-static t_UBSEC_ubsec_open *p_UBSEC_ubsec_open = NULL;
-static t_UBSEC_ubsec_close *p_UBSEC_ubsec_close = NULL;
-#ifndef OPENSSL_NO_DH
-static t_UBSEC_diffie_hellman_generate_ioctl 
-	*p_UBSEC_diffie_hellman_generate_ioctl = NULL;
-static t_UBSEC_diffie_hellman_agree_ioctl *p_UBSEC_diffie_hellman_agree_ioctl = NULL;
-#endif
-/* #ifndef OPENSSL_NO_RSA */
-static t_UBSEC_rsa_mod_exp_ioctl *p_UBSEC_rsa_mod_exp_ioctl = NULL;
-static t_UBSEC_rsa_mod_exp_crt_ioctl *p_UBSEC_rsa_mod_exp_crt_ioctl = NULL;
-/* #endif */
-#ifndef OPENSSL_NO_DSA
-static t_UBSEC_dsa_sign_ioctl *p_UBSEC_dsa_sign_ioctl = NULL;
-static t_UBSEC_dsa_verify_ioctl *p_UBSEC_dsa_verify_ioctl = NULL;
-#endif
-static t_UBSEC_math_accelerate_ioctl *p_UBSEC_math_accelerate_ioctl = NULL;
-static t_UBSEC_rng_ioctl *p_UBSEC_rng_ioctl = NULL;
-static t_UBSEC_max_key_len_ioctl *p_UBSEC_max_key_len_ioctl = NULL;
-
-static int max_key_len = 1024;  /* ??? */
-
-/* 
- * These are the static string constants for the DSO file name and the function
- * symbol names to bind to. 
- */
-
-static const char *UBSEC_LIBNAME = NULL;
-static const char *get_UBSEC_LIBNAME(void)
-	{
-	if(UBSEC_LIBNAME)
-		return UBSEC_LIBNAME;
-	return "ubsec";
-	}
-static void free_UBSEC_LIBNAME(void)
-	{
-	if(UBSEC_LIBNAME)
-		OPENSSL_free((void*)UBSEC_LIBNAME);
-	UBSEC_LIBNAME = NULL;
-	}
-static long set_UBSEC_LIBNAME(const char *name)
-	{
-	free_UBSEC_LIBNAME();
-	return (((UBSEC_LIBNAME = BUF_strdup(name)) != NULL) ? 1 : 0);
-	}
-static const char *UBSEC_F1 = "ubsec_bytes_to_bits";
-static const char *UBSEC_F2 = "ubsec_bits_to_bytes";
-static const char *UBSEC_F3 = "ubsec_open";
-static const char *UBSEC_F4 = "ubsec_close";
-#ifndef OPENSSL_NO_DH
-static const char *UBSEC_F5 = "diffie_hellman_generate_ioctl";
-static const char *UBSEC_F6 = "diffie_hellman_agree_ioctl";
-#endif
-/* #ifndef OPENSSL_NO_RSA */
-static const char *UBSEC_F7 = "rsa_mod_exp_ioctl";
-static const char *UBSEC_F8 = "rsa_mod_exp_crt_ioctl";
-/* #endif */
-#ifndef OPENSSL_NO_DSA
-static const char *UBSEC_F9 = "dsa_sign_ioctl";
-static const char *UBSEC_F10 = "dsa_verify_ioctl";
-#endif
-static const char *UBSEC_F11 = "math_accelerate_ioctl";
-static const char *UBSEC_F12 = "rng_ioctl";
-static const char *UBSEC_F13 = "ubsec_max_key_len_ioctl";
-
-/* Destructor (complements the "ENGINE_ubsec()" constructor) */
-static int ubsec_destroy(ENGINE *e)
-	{
-	free_UBSEC_LIBNAME();
-	ERR_unload_UBSEC_strings();
-	return 1;
-	}
-
-/* (de)initialisation functions. */
-static int ubsec_init(ENGINE *e)
-	{
-	t_UBSEC_ubsec_bytes_to_bits *p1;
-	t_UBSEC_ubsec_bits_to_bytes *p2;
-	t_UBSEC_ubsec_open *p3;
-	t_UBSEC_ubsec_close *p4;
-#ifndef OPENSSL_NO_DH
-	t_UBSEC_diffie_hellman_generate_ioctl *p5;
-	t_UBSEC_diffie_hellman_agree_ioctl *p6;
-#endif
-/* #ifndef OPENSSL_NO_RSA */
-	t_UBSEC_rsa_mod_exp_ioctl *p7;
-	t_UBSEC_rsa_mod_exp_crt_ioctl *p8;
-/* #endif */
-#ifndef OPENSSL_NO_DSA
-	t_UBSEC_dsa_sign_ioctl *p9;
-	t_UBSEC_dsa_verify_ioctl *p10;
-#endif
-	t_UBSEC_math_accelerate_ioctl *p11;
-	t_UBSEC_rng_ioctl *p12;
-        t_UBSEC_max_key_len_ioctl *p13;
-	int fd = 0;
-
-	if(ubsec_dso != NULL)
-		{
-		UBSECerr(UBSEC_F_UBSEC_INIT, UBSEC_R_ALREADY_LOADED);
-		goto err;
-		}
-	/* 
-	 * Attempt to load libubsec.so/ubsec.dll/whatever. 
-	 */
-	ubsec_dso = DSO_load(NULL, get_UBSEC_LIBNAME(), NULL, 0);
-	if(ubsec_dso == NULL)
-		{
-		UBSECerr(UBSEC_F_UBSEC_INIT, UBSEC_R_DSO_FAILURE);
-		goto err;
-		}
-
-	if (
-	!(p1 = (t_UBSEC_ubsec_bytes_to_bits *) DSO_bind_func(ubsec_dso, UBSEC_F1)) ||
-	!(p2 = (t_UBSEC_ubsec_bits_to_bytes *) DSO_bind_func(ubsec_dso, UBSEC_F2)) ||
-	!(p3 = (t_UBSEC_ubsec_open *) DSO_bind_func(ubsec_dso, UBSEC_F3)) ||
-	!(p4 = (t_UBSEC_ubsec_close *) DSO_bind_func(ubsec_dso, UBSEC_F4)) ||
-#ifndef OPENSSL_NO_DH
-	!(p5 = (t_UBSEC_diffie_hellman_generate_ioctl *) 
-				DSO_bind_func(ubsec_dso, UBSEC_F5)) ||
-	!(p6 = (t_UBSEC_diffie_hellman_agree_ioctl *) 
-				DSO_bind_func(ubsec_dso, UBSEC_F6)) ||
-#endif
-/* #ifndef OPENSSL_NO_RSA */
-	!(p7 = (t_UBSEC_rsa_mod_exp_ioctl *) DSO_bind_func(ubsec_dso, UBSEC_F7)) ||
-	!(p8 = (t_UBSEC_rsa_mod_exp_crt_ioctl *) DSO_bind_func(ubsec_dso, UBSEC_F8)) ||
-/* #endif */
-#ifndef OPENSSL_NO_DSA
-	!(p9 = (t_UBSEC_dsa_sign_ioctl *) DSO_bind_func(ubsec_dso, UBSEC_F9)) ||
-	!(p10 = (t_UBSEC_dsa_verify_ioctl *) DSO_bind_func(ubsec_dso, UBSEC_F10)) ||
-#endif
-	!(p11 = (t_UBSEC_math_accelerate_ioctl *) 
-				DSO_bind_func(ubsec_dso, UBSEC_F11)) ||
-	!(p12 = (t_UBSEC_rng_ioctl *) DSO_bind_func(ubsec_dso, UBSEC_F12)) ||
-        !(p13 = (t_UBSEC_max_key_len_ioctl *) DSO_bind_func(ubsec_dso, UBSEC_F13)))
-		{
-		UBSECerr(UBSEC_F_UBSEC_INIT, UBSEC_R_DSO_FAILURE);
-		goto err;
-		}
-
-	/* Copy the pointers */
-	p_UBSEC_ubsec_bytes_to_bits = p1;
-	p_UBSEC_ubsec_bits_to_bytes = p2;
-	p_UBSEC_ubsec_open = p3;
-	p_UBSEC_ubsec_close = p4;
-#ifndef OPENSSL_NO_DH
-	p_UBSEC_diffie_hellman_generate_ioctl = p5;
-	p_UBSEC_diffie_hellman_agree_ioctl = p6;
-#endif
-#ifndef OPENSSL_NO_RSA
-	p_UBSEC_rsa_mod_exp_ioctl = p7;
-	p_UBSEC_rsa_mod_exp_crt_ioctl = p8;
-#endif
-#ifndef OPENSSL_NO_DSA
-	p_UBSEC_dsa_sign_ioctl = p9;
-	p_UBSEC_dsa_verify_ioctl = p10;
-#endif
-	p_UBSEC_math_accelerate_ioctl = p11;
-	p_UBSEC_rng_ioctl = p12;
-        p_UBSEC_max_key_len_ioctl = p13;
-
-	/* Perform an open to see if there's actually any unit running. */
-	if (((fd = p_UBSEC_ubsec_open(UBSEC_KEY_DEVICE_NAME)) > 0) && (p_UBSEC_max_key_len_ioctl(fd, &max_key_len) == 0))
-	{
-	   p_UBSEC_ubsec_close(fd);
-	   return 1;
-	}
-	else
-	{
-	  UBSECerr(UBSEC_F_UBSEC_INIT, UBSEC_R_UNIT_FAILURE);
-	}
-
-err:
-	if(ubsec_dso)
-		DSO_free(ubsec_dso);
-	p_UBSEC_ubsec_bytes_to_bits = NULL;
-	p_UBSEC_ubsec_bits_to_bytes = NULL;
-	p_UBSEC_ubsec_open = NULL;
-	p_UBSEC_ubsec_close = NULL;
-#ifndef OPENSSL_NO_DH
-	p_UBSEC_diffie_hellman_generate_ioctl = NULL;
-	p_UBSEC_diffie_hellman_agree_ioctl = NULL;
-#endif
-#ifndef OPENSSL_NO_RSA
-	p_UBSEC_rsa_mod_exp_ioctl = NULL;
-	p_UBSEC_rsa_mod_exp_crt_ioctl = NULL;
-#endif
-#ifndef OPENSSL_NO_DSA
-	p_UBSEC_dsa_sign_ioctl = NULL;
-	p_UBSEC_dsa_verify_ioctl = NULL;
-#endif
-	p_UBSEC_math_accelerate_ioctl = NULL;
-	p_UBSEC_rng_ioctl = NULL;
-        p_UBSEC_max_key_len_ioctl = NULL;
-
-	return 0;
-	}
-
-static int ubsec_finish(ENGINE *e)
-	{
-	free_UBSEC_LIBNAME();
-	if(ubsec_dso == NULL)
-		{
-		UBSECerr(UBSEC_F_UBSEC_FINISH, UBSEC_R_NOT_LOADED);
-		return 0;
-		}
-	if(!DSO_free(ubsec_dso))
-		{
-		UBSECerr(UBSEC_F_UBSEC_FINISH, UBSEC_R_DSO_FAILURE);
-		return 0;
-		}
-	ubsec_dso = NULL;
-	p_UBSEC_ubsec_bytes_to_bits = NULL;
-	p_UBSEC_ubsec_bits_to_bytes = NULL;
-	p_UBSEC_ubsec_open = NULL;
-	p_UBSEC_ubsec_close = NULL;
-#ifndef OPENSSL_NO_DH
-	p_UBSEC_diffie_hellman_generate_ioctl = NULL;
-	p_UBSEC_diffie_hellman_agree_ioctl = NULL;
-#endif
-#ifndef OPENSSL_NO_RSA
-	p_UBSEC_rsa_mod_exp_ioctl = NULL;
-	p_UBSEC_rsa_mod_exp_crt_ioctl = NULL;
-#endif
-#ifndef OPENSSL_NO_DSA
-	p_UBSEC_dsa_sign_ioctl = NULL;
-	p_UBSEC_dsa_verify_ioctl = NULL;
-#endif
-	p_UBSEC_math_accelerate_ioctl = NULL;
-	p_UBSEC_rng_ioctl = NULL;
-        p_UBSEC_max_key_len_ioctl = NULL;
-	return 1;
-	}
-
-static int ubsec_ctrl(ENGINE *e, int cmd, long i, void *p, void (*f)())
-	{
-	int initialised = ((ubsec_dso == NULL) ? 0 : 1);
-	switch(cmd)
-		{
-	case UBSEC_CMD_SO_PATH:
-		if(p == NULL)
-			{
-			UBSECerr(UBSEC_F_UBSEC_CTRL,ERR_R_PASSED_NULL_PARAMETER);
-			return 0;
-			}
-		if(initialised)
-			{
-			UBSECerr(UBSEC_F_UBSEC_CTRL,UBSEC_R_ALREADY_LOADED);
-			return 0;
-			}
-		return set_UBSEC_LIBNAME((const char *)p);
-	default:
-		break;
-		}
-	UBSECerr(UBSEC_F_UBSEC_CTRL,UBSEC_R_CTRL_COMMAND_NOT_IMPLEMENTED);
-	return 0;
-	}
-
-static int ubsec_mod_exp(BIGNUM *r, const BIGNUM *a, const BIGNUM *p,
-		const BIGNUM *m, BN_CTX *ctx)
-	{
-	int 	y_len = 0;
-	int 	fd;
-
-	if(ubsec_dso == NULL)
-	{
-		UBSECerr(UBSEC_F_UBSEC_MOD_EXP, UBSEC_R_NOT_LOADED);
-		return 0;
-	}
-
-	/* Check if hardware can't handle this argument. */
-	y_len = BN_num_bits(m);
-	if (y_len > max_key_len) {
-		UBSECerr(UBSEC_F_UBSEC_MOD_EXP, UBSEC_R_SIZE_TOO_LARGE_OR_TOO_SMALL);
-                return BN_mod_exp(r, a, p, m, ctx);
-	} 
-
-	if(!bn_wexpand(r, m->top))
-	{
-		UBSECerr(UBSEC_F_UBSEC_MOD_EXP, UBSEC_R_BN_EXPAND_FAIL);
-		return 0;
-	}
-
-	if ((fd = p_UBSEC_ubsec_open(UBSEC_KEY_DEVICE_NAME)) <= 0) {
-		fd = 0;
-		UBSECerr(UBSEC_F_UBSEC_INIT, UBSEC_R_UNIT_FAILURE);
-                return BN_mod_exp(r, a, p, m, ctx);
-	}
-
-	if (p_UBSEC_rsa_mod_exp_ioctl(fd, (unsigned char *)a->d, BN_num_bits(a),
-		(unsigned char *)m->d, BN_num_bits(m), (unsigned char *)p->d, 
-		BN_num_bits(p), (unsigned char *)r->d, &y_len) != 0)
-	{
-		UBSECerr(UBSEC_F_UBSEC_MOD_EXP, UBSEC_R_REQUEST_FAILED);
-                p_UBSEC_ubsec_close(fd);
-
-                return BN_mod_exp(r, a, p, m, ctx);
-	}
-
-	p_UBSEC_ubsec_close(fd);
-
-	r->top = (BN_num_bits(m)+BN_BITS2-1)/BN_BITS2;
-	return 1;
-	}
-
-#ifndef OPENSSL_NO_RSA
-static int ubsec_rsa_mod_exp(BIGNUM *r0, const BIGNUM *I, RSA *rsa)
-	{
-	BN_CTX *ctx;
-	int to_return = 0;
-
-	if((ctx = BN_CTX_new()) == NULL)
-		goto err;
-
-	if(!rsa->p || !rsa->q || !rsa->dmp1 || !rsa->dmq1 || !rsa->iqmp)
-		{
-		UBSECerr(UBSEC_F_UBSEC_RSA_MOD_EXP, UBSEC_R_MISSING_KEY_COMPONENTS);
-		goto err;
-		}
-
-	to_return = ubsec_mod_exp_crt(r0, I, rsa->p, rsa->q, rsa->dmp1,
-		    rsa->dmq1, rsa->iqmp, ctx);
-	if (to_return == FAIL_TO_SOFTWARE)
-	{
-	  /*
-	   * Do in software as hardware failed.
-	   */
-	   const RSA_METHOD *meth = RSA_PKCS1_SSLeay();
-	   to_return = (*meth->rsa_mod_exp)(r0, I, rsa);
-	}
-err:
-	if(ctx)
-		BN_CTX_free(ctx);
-	return to_return;
-	}
-#endif
-
-static int ubsec_mod_exp_crt(BIGNUM *r, const BIGNUM *a, const BIGNUM *p,
-			const BIGNUM *q, const BIGNUM *dp,
-			const BIGNUM *dq, const BIGNUM *qinv, BN_CTX *ctx)
-	{
-	int	y_len,
-		m_len,
-		fd;
-
-	m_len = BN_num_bytes(p) + BN_num_bytes(q) + 1;
-	y_len = BN_num_bits(p) + BN_num_bits(q);
-
-	/* Check if hardware can't handle this argument. */
-	if (y_len > max_key_len) {
-		UBSECerr(UBSEC_F_UBSEC_MOD_EXP, UBSEC_R_SIZE_TOO_LARGE_OR_TOO_SMALL);
-		return FAIL_TO_SOFTWARE;
-	} 
-
-	if (!bn_wexpand(r, p->top + q->top + 1)) {
-		UBSECerr(UBSEC_F_UBSEC_RSA_MOD_EXP_CRT, UBSEC_R_BN_EXPAND_FAIL);
-		return 0;
-	}
-
-	if ((fd = p_UBSEC_ubsec_open(UBSEC_KEY_DEVICE_NAME)) <= 0) {
-		fd = 0;
-		UBSECerr(UBSEC_F_UBSEC_INIT, UBSEC_R_UNIT_FAILURE);
-		return FAIL_TO_SOFTWARE;
-	}
-
-	if (p_UBSEC_rsa_mod_exp_crt_ioctl(fd,
-		(unsigned char *)a->d, BN_num_bits(a), 
-		(unsigned char *)qinv->d, BN_num_bits(qinv),
-		(unsigned char *)dp->d, BN_num_bits(dp),
-		(unsigned char *)p->d, BN_num_bits(p),
-		(unsigned char *)dq->d, BN_num_bits(dq),
-		(unsigned char *)q->d, BN_num_bits(q),
-		(unsigned char *)r->d,  &y_len) != 0) {
-		UBSECerr(UBSEC_F_UBSEC_MOD_EXP, UBSEC_R_REQUEST_FAILED);
-                p_UBSEC_ubsec_close(fd);
-		return FAIL_TO_SOFTWARE;
-	}
-
-	p_UBSEC_ubsec_close(fd);
-
-	r->top = (BN_num_bits(p) + BN_num_bits(q) + BN_BITS2 - 1)/BN_BITS2;
-	return 1;
-}
-
-#ifndef OPENSSL_NO_DSA
-#ifdef NOT_USED
-static int ubsec_dsa_mod_exp(DSA *dsa, BIGNUM *rr, BIGNUM *a1,
-		BIGNUM *p1, BIGNUM *a2, BIGNUM *p2, BIGNUM *m,
-		BN_CTX *ctx, BN_MONT_CTX *in_mont)
-	{
-	BIGNUM t;
-	int to_return = 0;
- 
-	BN_init(&t);
-	/* let rr = a1 ^ p1 mod m */
-	if (!ubsec_mod_exp(rr,a1,p1,m,ctx)) goto end;
-	/* let t = a2 ^ p2 mod m */
-	if (!ubsec_mod_exp(&t,a2,p2,m,ctx)) goto end;
-	/* let rr = rr * t mod m */
-	if (!BN_mod_mul(rr,rr,&t,m,ctx)) goto end;
-	to_return = 1;
-end:
-	BN_free(&t);
-	return to_return;
-	}
-
-static int ubsec_mod_exp_dsa(DSA *dsa, BIGNUM *r, BIGNUM *a,
-		const BIGNUM *p, const BIGNUM *m, BN_CTX *ctx,
-		BN_MONT_CTX *m_ctx)
-	{
-	return ubsec_mod_exp(r, a, p, m, ctx);
-	}
-#endif
-#endif
-
-/*
- * This function is aliased to mod_exp (with the mont stuff dropped).
- */
-static int ubsec_mod_exp_mont(BIGNUM *r, const BIGNUM *a, const BIGNUM *p,
-		const BIGNUM *m, BN_CTX *ctx, BN_MONT_CTX *m_ctx)
-        {
-	int ret = 0;
-
-#ifndef OPENSSL_NO_RSA
- 	/* Do in software if the key is too large for the hardware. */
-	if (BN_num_bits(m) > max_key_len)
-                {
-		const RSA_METHOD *meth = RSA_PKCS1_SSLeay();
-		ret = (*meth->bn_mod_exp)(r, a, p, m, ctx, m_ctx);
-                }
-        else
-#endif
-                {
-		ret = ubsec_mod_exp(r, a, p, m, ctx);
-                }
-	
-	return ret;
-        }
-
-#ifndef OPENSSL_NO_DH
-/* This function is aliased to mod_exp (with the dh and mont dropped). */
-static int ubsec_mod_exp_dh(const DH *dh, BIGNUM *r, const BIGNUM *a,
-		const BIGNUM *p, const BIGNUM *m, BN_CTX *ctx,
-		BN_MONT_CTX *m_ctx)
-	{
-	return ubsec_mod_exp(r, a, p, m, ctx);
-	}
-#endif
-
-#ifndef OPENSSL_NO_DSA
-static DSA_SIG *ubsec_dsa_do_sign(const unsigned char *dgst, int dlen, DSA *dsa)
-	{
-	DSA_SIG *to_return = NULL;
-	int s_len = 160, r_len = 160, d_len, fd;
-	BIGNUM m, *r=NULL, *s=NULL;
-
-	BN_init(&m);
-
-	s = BN_new();
-	r = BN_new();
-	if ((s == NULL) || (r==NULL))
-		goto err;
-
-	d_len = p_UBSEC_ubsec_bytes_to_bits((unsigned char *)dgst, dlen);
-
-        if(!bn_wexpand(r, (160+BN_BITS2-1)/BN_BITS2) ||
-       	   (!bn_wexpand(s, (160+BN_BITS2-1)/BN_BITS2))) {
-		UBSECerr(UBSEC_F_UBSEC_DSA_SIGN, UBSEC_R_BN_EXPAND_FAIL);
-		goto err;
-	}
-
-	if (BN_bin2bn(dgst,dlen,&m) == NULL) {
-		UBSECerr(UBSEC_F_UBSEC_DSA_SIGN, UBSEC_R_BN_EXPAND_FAIL);
-		goto err;
-	} 
-
-	if ((fd = p_UBSEC_ubsec_open(UBSEC_KEY_DEVICE_NAME)) <= 0) {
-                const DSA_METHOD *meth;
-		fd = 0;
-		UBSECerr(UBSEC_F_UBSEC_INIT, UBSEC_R_UNIT_FAILURE);
-                meth = DSA_OpenSSL();
-                to_return =  meth->dsa_do_sign(dgst, dlen, dsa);
-		goto err;
-	}
-
-	if (p_UBSEC_dsa_sign_ioctl(fd, 0, /* compute hash before signing */
-		(unsigned char *)dgst, d_len,
-		NULL, 0,  /* compute random value */
-		(unsigned char *)dsa->p->d, BN_num_bits(dsa->p), 
-		(unsigned char *)dsa->q->d, BN_num_bits(dsa->q),
-		(unsigned char *)dsa->g->d, BN_num_bits(dsa->g),
-		(unsigned char *)dsa->priv_key->d, BN_num_bits(dsa->priv_key),
-		(unsigned char *)r->d, &r_len,
-		(unsigned char *)s->d, &s_len ) != 0) {
-                const DSA_METHOD *meth;
-
-		UBSECerr(UBSEC_F_UBSEC_DSA_SIGN, UBSEC_R_REQUEST_FAILED);
-                p_UBSEC_ubsec_close(fd);
-                meth = DSA_OpenSSL();
-                to_return = meth->dsa_do_sign(dgst, dlen, dsa);
-
-		goto err;
-	}
-
-	p_UBSEC_ubsec_close(fd);
-
-	r->top = (160+BN_BITS2-1)/BN_BITS2;
-	s->top = (160+BN_BITS2-1)/BN_BITS2;
-
-	to_return = DSA_SIG_new();
-	if(to_return == NULL) {
-		UBSECerr(UBSEC_F_UBSEC_DSA_SIGN, UBSEC_R_BN_EXPAND_FAIL);
-		goto err;
-	}
-
-	to_return->r = r;
-	to_return->s = s;
-
-err:
-	if (!to_return) {
-		if (r) BN_free(r);
-		if (s) BN_free(s);
-	}                                 
-	BN_clear_free(&m);
-	return to_return;
-}
-
-static int ubsec_dsa_verify(const unsigned char *dgst, int dgst_len,
-                                DSA_SIG *sig, DSA *dsa)
-	{
-	int v_len, d_len;
-	int to_return = 0;
-	int fd;
-	BIGNUM v;
-
-	BN_init(&v);
-
-	if(!bn_wexpand(&v, dsa->p->top)) {
-		UBSECerr(UBSEC_F_UBSEC_DSA_VERIFY ,UBSEC_R_BN_EXPAND_FAIL);
-		goto err;
-	}
-
-	v_len = BN_num_bits(dsa->p);
-
-	d_len = p_UBSEC_ubsec_bytes_to_bits((unsigned char *)dgst, dgst_len);
-
-	if ((fd = p_UBSEC_ubsec_open(UBSEC_KEY_DEVICE_NAME)) <= 0) {
-                const DSA_METHOD *meth;
-		fd = 0;
-		UBSECerr(UBSEC_F_UBSEC_INIT, UBSEC_R_UNIT_FAILURE);
-                meth = DSA_OpenSSL();
-                to_return = meth->dsa_do_verify(dgst, dgst_len, sig, dsa);
-		goto err;
-	}
-
-	if (p_UBSEC_dsa_verify_ioctl(fd, 0, /* compute hash before signing */
-		(unsigned char *)dgst, d_len,
-		(unsigned char *)dsa->p->d, BN_num_bits(dsa->p), 
-		(unsigned char *)dsa->q->d, BN_num_bits(dsa->q),
-		(unsigned char *)dsa->g->d, BN_num_bits(dsa->g),
-		(unsigned char *)dsa->pub_key->d, BN_num_bits(dsa->pub_key),
-		(unsigned char *)sig->r->d, BN_num_bits(sig->r),
-		(unsigned char *)sig->s->d, BN_num_bits(sig->s),
-		(unsigned char *)v.d, &v_len) != 0) {
-                const DSA_METHOD *meth;
-		UBSECerr(UBSEC_F_UBSEC_DSA_VERIFY , UBSEC_R_REQUEST_FAILED);
-                p_UBSEC_ubsec_close(fd);
-
-                meth = DSA_OpenSSL();
-                to_return = meth->dsa_do_verify(dgst, dgst_len, sig, dsa);
-
-		goto err;
-	}
-
-	p_UBSEC_ubsec_close(fd);
-
-	to_return = 1;
-err:
-	BN_clear_free(&v);
-	return to_return;
-	}
-#endif
-
-#ifndef OPENSSL_NO_DH
-static int ubsec_dh_compute_key (unsigned char *key,const BIGNUM *pub_key,DH *dh)
-        {
-        int      ret      = -1,
-                 k_len,
-                 fd;
-
-        k_len = BN_num_bits(dh->p);
-
-        if ((fd = p_UBSEC_ubsec_open(UBSEC_KEY_DEVICE_NAME)) <= 0)
-                {
-                const DH_METHOD *meth;
-                ENGINEerr(UBSEC_F_UBSEC_INIT, UBSEC_R_UNIT_FAILURE);
-                meth = DH_OpenSSL();
-                ret = meth->compute_key(key, pub_key, dh);
-                goto err;
-                }
-
-        if (p_UBSEC_diffie_hellman_agree_ioctl(fd,
-                                               (unsigned char *)dh->priv_key->d, BN_num_bits(dh->priv_key),
-                                               (unsigned char *)pub_key->d, BN_num_bits(pub_key),
-                                               (unsigned char *)dh->p->d, BN_num_bits(dh->p),
-                                               key, &k_len) != 0)
-                {
-                /* Hardware's a no go, failover to software */
-                const DH_METHOD *meth;
-                ENGINEerr(UBSEC_F_UBSEC_DH_COMPUTE_KEY, UBSEC_R_REQUEST_FAILED);
-                p_UBSEC_ubsec_close(fd);
-
-                meth = DH_OpenSSL();
-                ret = meth->compute_key(key, pub_key, dh);
-
-                goto err;
-                }
-
-        p_UBSEC_ubsec_close(fd);
-
-        ret = p_UBSEC_ubsec_bits_to_bytes(k_len);
-err:
-        return ret;
-        }
-
-static int ubsec_dh_generate_key (DH *dh)
-        {
-        int      ret               = 0,
-                 random_bits       = 0,
-                 pub_key_len       = 0,
-                 priv_key_len      = 0,
-                 fd;
-        BIGNUM   *pub_key          = NULL;
-        BIGNUM   *priv_key         = NULL;
-
-        /* 
-         *  How many bits should Random x be? dh_key.c
-         *  sets the range from 0 to num_bits(modulus) ???
-         */
-
-        if (dh->priv_key == NULL)
-                {
-                priv_key = BN_new();
-                if (priv_key == NULL) goto err;
-                priv_key_len = BN_num_bits(dh->p);
-                bn_wexpand(priv_key, dh->p->top);
-                do
-                        if (!BN_rand_range(priv_key, dh->p)) goto err;
-                while (BN_is_zero(priv_key));
-                random_bits = BN_num_bits(priv_key);
-                }
-        else
-                {
-                priv_key = dh->priv_key;
-                }
-
-        if (dh->pub_key == NULL)
-                {
-                pub_key = BN_new();
-                pub_key_len = BN_num_bits(dh->p);
-                bn_wexpand(pub_key, dh->p->top);
-                if(pub_key == NULL) goto err;
-                }
-        else
-                {
-                pub_key = dh->pub_key;
-                }
-
-        if ((fd = p_UBSEC_ubsec_open(UBSEC_KEY_DEVICE_NAME)) <= 0)
-                {
-                const DH_METHOD *meth;
-                ENGINEerr(UBSEC_F_UBSEC_INIT, UBSEC_R_UNIT_FAILURE);
-                meth = DH_OpenSSL();
-                ret = meth->generate_key(dh);
-                goto err;
-                }
-
-        if (p_UBSEC_diffie_hellman_generate_ioctl(fd,
-                                                  (unsigned char *)priv_key->d, &priv_key_len,
-                                                  (unsigned char *)pub_key->d,  &pub_key_len,
-                                                  (unsigned char *)dh->g->d, BN_num_bits(dh->g),
-                                                  (unsigned char *)dh->p->d, BN_num_bits(dh->p),
-                                                  0, 0, random_bits) != 0)
-                {
-                /* Hardware's a no go, failover to software */
-                const DH_METHOD *meth;
-
-                ENGINEerr(UBSEC_F_UBSEC_DH_COMPUTE_KEY, UBSEC_R_REQUEST_FAILED);
-                p_UBSEC_ubsec_close(fd);
-
-                meth = DH_OpenSSL();
-                ret = meth->generate_key(dh);
-
-                goto err;
-                }
-
-        p_UBSEC_ubsec_close(fd);
-
-        dh->pub_key = pub_key;
-        dh->pub_key->top = (pub_key_len + BN_BITS2-1) / BN_BITS2;
-        dh->priv_key = priv_key;
-        dh->priv_key->top = (priv_key_len + BN_BITS2-1) / BN_BITS2;
-
-        ret = 1;
-err:
-        return ret;
-        }
-#endif
-
-#ifdef NOT_USED
-static int ubsec_rand_bytes(unsigned char * buf,
-                            int num)
-        {
-        int      ret      = 0,
-                 fd;
-
-        if ((fd = p_UBSEC_ubsec_open(UBSEC_KEY_DEVICE_NAME)) <= 0)
-                {
-                const RAND_METHOD *meth;
-                ENGINEerr(UBSEC_F_UBSEC_INIT, UBSEC_R_UNIT_FAILURE);
-                num = p_UBSEC_ubsec_bits_to_bytes(num);
-                meth = RAND_SSLeay();
-                meth->seed(buf, num);
-                ret = meth->bytes(buf, num);
-                goto err;
-                }
-
-        num *= 8; /* bytes to bits */
-
-        if (p_UBSEC_rng_ioctl(fd,
-                              UBSEC_RNG_DIRECT,
-                              buf,
-                              &num) != 0)
-                {
-                /* Hardware's a no go, failover to software */
-                const RAND_METHOD *meth;
-
-                ENGINEerr(UBSEC_F_UBSEC_RNG_BYTES, UBSEC_R_REQUEST_FAILED);
-                p_UBSEC_ubsec_close(fd);
-
-                num = p_UBSEC_ubsec_bits_to_bytes(num);
-                meth = RAND_SSLeay();
-                meth->seed(buf, num);
-                ret = meth->bytes(buf, num);
-
-                goto err;
-                }
-
-        p_UBSEC_ubsec_close(fd);
-
-        ret = 1;
-err:
-        return(ret);
-        }
-
-
-static int ubsec_rand_status(void)
-	{
-	return 0;
-	}
-#endif
-
-/* This stuff is needed if this ENGINE is being compiled into a self-contained
- * shared-library. */
-#ifdef ENGINE_DYNAMIC_SUPPORT
-static int bind_fn(ENGINE *e, const char *id)
-	{
-	if(id && (strcmp(id, engine_ubsec_id) != 0))
-		return 0;
-	if(!bind_helper(e))
-		return 0;
-	return 1;
-	}
-IMPLEMENT_DYNAMIC_CHECK_FN()
-IMPLEMENT_DYNAMIC_BIND_FN(bind_fn)
-#endif /* ENGINE_DYNAMIC_SUPPORT */
-
-#endif /* !OPENSSL_NO_HW_UBSEC */
-#endif /* !OPENSSL_NO_HW */
diff --git a/crypto/openssl/crypto/engine/hw_ubsec_err.c b/crypto/openssl/crypto/engine/hw_ubsec_err.c
deleted file mode 100644
index d707331fc201..000000000000
--- a/crypto/openssl/crypto/engine/hw_ubsec_err.c
+++ /dev/null
@@ -1,151 +0,0 @@
-/* hw_ubsec_err.c */
-/* ====================================================================
- * Copyright (c) 1999 The OpenSSL Project.  All rights reserved.
- *
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions
- * are met:
- *
- * 1. Redistributions of source code must retain the above copyright
- *    notice, this list of conditions and the following disclaimer. 
- *
- * 2. Redistributions in binary form must reproduce the above copyright
- *    notice, this list of conditions and the following disclaimer in
- *    the documentation and/or other materials provided with the
- *    distribution.
- *
- * 3. All advertising materials mentioning features or use of this
- *    software must display the following acknowledgment:
- *    "This product includes software developed by the OpenSSL Project
- *    for use in the OpenSSL Toolkit. (http://www.OpenSSL.org/)"
- *
- * 4. The names "OpenSSL Toolkit" and "OpenSSL Project" must not be used to
- *    endorse or promote products derived from this software without
- *    prior written permission. For written permission, please contact
- *    openssl-core@OpenSSL.org.
- *
- * 5. Products derived from this software may not be called "OpenSSL"
- *    nor may "OpenSSL" appear in their names without prior written
- *    permission of the OpenSSL Project.
- *
- * 6. Redistributions of any form whatsoever must retain the following
- *    acknowledgment:
- *    "This product includes software developed by the OpenSSL Project
- *    for use in the OpenSSL Toolkit (http://www.OpenSSL.org/)"
- *
- * THIS SOFTWARE IS PROVIDED BY THE OpenSSL PROJECT ``AS IS'' AND ANY
- * EXPRESSED OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
- * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR
- * PURPOSE ARE DISCLAIMED.  IN NO EVENT SHALL THE OpenSSL PROJECT OR
- * ITS CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
- * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
- * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
- * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
- * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
- * STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
- * ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED
- * OF THE POSSIBILITY OF SUCH DAMAGE.
- * ====================================================================
- *
- * This product includes cryptographic software written by Eric Young
- * (eay@cryptsoft.com).  This product includes software written by Tim
- * Hudson (tjh@cryptsoft.com).
- *
- */
-
-/* NOTE: this file was auto generated by the mkerr.pl script: any changes
- * made to it will be overwritten when the script next updates this file,
- * only reason strings will be preserved.
- */
-
-#include <stdio.h>
-#include <openssl/err.h>
-#include "hw_ubsec_err.h"
-
-/* BEGIN ERROR CODES */
-#ifndef OPENSSL_NO_ERR
-static ERR_STRING_DATA UBSEC_str_functs[]=
-	{
-{ERR_PACK(0,UBSEC_F_UBSEC_CTRL,0),	"UBSEC_CTRL"},
-{ERR_PACK(0,UBSEC_F_UBSEC_DH_COMPUTE_KEY,0),	"UBSEC_DH_COMPUTE_KEY"},
-{ERR_PACK(0,UBSEC_F_UBSEC_DSA_SIGN,0),	"UBSEC_DSA_SIGN"},
-{ERR_PACK(0,UBSEC_F_UBSEC_DSA_VERIFY,0),	"UBSEC_DSA_VERIFY"},
-{ERR_PACK(0,UBSEC_F_UBSEC_FINISH,0),	"UBSEC_FINISH"},
-{ERR_PACK(0,UBSEC_F_UBSEC_INIT,0),	"UBSEC_INIT"},
-{ERR_PACK(0,UBSEC_F_UBSEC_MOD_EXP,0),	"UBSEC_MOD_EXP"},
-{ERR_PACK(0,UBSEC_F_UBSEC_RNG_BYTES,0),	"UBSEC_RNG_BYTES"},
-{ERR_PACK(0,UBSEC_F_UBSEC_RSA_MOD_EXP,0),	"UBSEC_RSA_MOD_EXP"},
-{ERR_PACK(0,UBSEC_F_UBSEC_RSA_MOD_EXP_CRT,0),	"UBSEC_RSA_MOD_EXP_CRT"},
-{0,NULL}
-	};
-
-static ERR_STRING_DATA UBSEC_str_reasons[]=
-	{
-{UBSEC_R_ALREADY_LOADED                  ,"already loaded"},
-{UBSEC_R_BN_EXPAND_FAIL                  ,"bn expand fail"},
-{UBSEC_R_CTRL_COMMAND_NOT_IMPLEMENTED    ,"ctrl command not implemented"},
-{UBSEC_R_DSO_FAILURE                     ,"dso failure"},
-{UBSEC_R_MISSING_KEY_COMPONENTS          ,"missing key components"},
-{UBSEC_R_NOT_LOADED                      ,"not loaded"},
-{UBSEC_R_REQUEST_FAILED                  ,"request failed"},
-{UBSEC_R_SIZE_TOO_LARGE_OR_TOO_SMALL     ,"size too large or too small"},
-{UBSEC_R_UNIT_FAILURE                    ,"unit failure"},
-{0,NULL}
-	};
-
-#endif
-
-#ifdef UBSEC_LIB_NAME
-static ERR_STRING_DATA UBSEC_lib_name[]=
-        {
-{0	,UBSEC_LIB_NAME},
-{0,NULL}
-	};
-#endif
-
-
-static int UBSEC_lib_error_code=0;
-static int UBSEC_error_init=1;
-
-static void ERR_load_UBSEC_strings(void)
-	{
-	if (UBSEC_lib_error_code == 0)
-		UBSEC_lib_error_code=ERR_get_next_error_library();
-
-	if (UBSEC_error_init)
-		{
-		UBSEC_error_init=0;
-#ifndef OPENSSL_NO_ERR
-		ERR_load_strings(UBSEC_lib_error_code,UBSEC_str_functs);
-		ERR_load_strings(UBSEC_lib_error_code,UBSEC_str_reasons);
-#endif
-
-#ifdef UBSEC_LIB_NAME
-		UBSEC_lib_name->error = ERR_PACK(UBSEC_lib_error_code,0,0);
-		ERR_load_strings(0,UBSEC_lib_name);
-#endif
-		}
-	}
-
-static void ERR_unload_UBSEC_strings(void)
-	{
-	if (UBSEC_error_init == 0)
-		{
-#ifndef OPENSSL_NO_ERR
-		ERR_unload_strings(UBSEC_lib_error_code,UBSEC_str_functs);
-		ERR_unload_strings(UBSEC_lib_error_code,UBSEC_str_reasons);
-#endif
-
-#ifdef UBSEC_LIB_NAME
-		ERR_unload_strings(0,UBSEC_lib_name);
-#endif
-		UBSEC_error_init=1;
-		}
-	}
-
-static void ERR_UBSEC_error(int function, int reason, char *file, int line)
-	{
-	if (UBSEC_lib_error_code == 0)
-		UBSEC_lib_error_code=ERR_get_next_error_library();
-	ERR_PUT_error(UBSEC_lib_error_code,function,reason,file,line);
-	}
diff --git a/crypto/openssl/crypto/engine/hw_ubsec_err.h b/crypto/openssl/crypto/engine/hw_ubsec_err.h
deleted file mode 100644
index 023d3be77116..000000000000
--- a/crypto/openssl/crypto/engine/hw_ubsec_err.h
+++ /dev/null
@@ -1,95 +0,0 @@
-/* ====================================================================
- * Copyright (c) 2001 The OpenSSL Project.  All rights reserved.
- *
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions
- * are met:
- *
- * 1. Redistributions of source code must retain the above copyright
- *    notice, this list of conditions and the following disclaimer. 
- *
- * 2. Redistributions in binary form must reproduce the above copyright
- *    notice, this list of conditions and the following disclaimer in
- *    the documentation and/or other materials provided with the
- *    distribution.
- *
- * 3. All advertising materials mentioning features or use of this
- *    software must display the following acknowledgment:
- *    "This product includes software developed by the OpenSSL Project
- *    for use in the OpenSSL Toolkit. (http://www.openssl.org/)"
- *
- * 4. The names "OpenSSL Toolkit" and "OpenSSL Project" must not be used to
- *    endorse or promote products derived from this software without
- *    prior written permission. For written permission, please contact
- *    openssl-core@openssl.org.
- *
- * 5. Products derived from this software may not be called "OpenSSL"
- *    nor may "OpenSSL" appear in their names without prior written
- *    permission of the OpenSSL Project.
- *
- * 6. Redistributions of any form whatsoever must retain the following
- *    acknowledgment:
- *    "This product includes software developed by the OpenSSL Project
- *    for use in the OpenSSL Toolkit (http://www.openssl.org/)"
- *
- * THIS SOFTWARE IS PROVIDED BY THE OpenSSL PROJECT ``AS IS'' AND ANY
- * EXPRESSED OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
- * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR
- * PURPOSE ARE DISCLAIMED.  IN NO EVENT SHALL THE OpenSSL PROJECT OR
- * ITS CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
- * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
- * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
- * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
- * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
- * STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
- * ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED
- * OF THE POSSIBILITY OF SUCH DAMAGE.
- * ====================================================================
- *
- * This product includes cryptographic software written by Eric Young
- * (eay@cryptsoft.com).  This product includes software written by Tim
- * Hudson (tjh@cryptsoft.com).
- *
- */
-
-#ifndef HEADER_UBSEC_ERR_H
-#define HEADER_UBSEC_ERR_H
-
-/* BEGIN ERROR CODES */
-/* The following lines are auto generated by the script mkerr.pl. Any changes
- * made after this point may be overwritten when the script is next run.
- */
-static void ERR_load_UBSEC_strings(void);
-static void ERR_unload_UBSEC_strings(void);
-static void ERR_UBSEC_error(int function, int reason, char *file, int line);
-#define UBSECerr(f,r) ERR_UBSEC_error((f),(r),__FILE__,__LINE__)
-
-/* Error codes for the UBSEC functions. */
-
-/* Function codes. */
-#define UBSEC_F_UBSEC_CTRL				 100
-#define UBSEC_F_UBSEC_DH_COMPUTE_KEY			 101
-#define UBSEC_F_UBSEC_DSA_SIGN				 102
-#define UBSEC_F_UBSEC_DSA_VERIFY			 103
-#define UBSEC_F_UBSEC_FINISH				 104
-#define UBSEC_F_UBSEC_INIT				 105
-#define UBSEC_F_UBSEC_MOD_EXP				 106
-#define UBSEC_F_UBSEC_RNG_BYTES				 107
-#define UBSEC_F_UBSEC_RSA_MOD_EXP			 108
-#define UBSEC_F_UBSEC_RSA_MOD_EXP_CRT			 109
-
-/* Reason codes. */
-#define UBSEC_R_ALREADY_LOADED				 100
-#define UBSEC_R_BN_EXPAND_FAIL				 101
-#define UBSEC_R_CTRL_COMMAND_NOT_IMPLEMENTED		 102
-#define UBSEC_R_DSO_FAILURE				 103
-#define UBSEC_R_MISSING_KEY_COMPONENTS			 104
-#define UBSEC_R_NOT_LOADED				 105
-#define UBSEC_R_REQUEST_FAILED				 106
-#define UBSEC_R_SIZE_TOO_LARGE_OR_TOO_SMALL		 107
-#define UBSEC_R_UNIT_FAILURE				 108
-
-#ifdef  __cplusplus
-}
-#endif
-#endif
diff --git a/crypto/openssl/crypto/engine/tb_cipher.c b/crypto/openssl/crypto/engine/tb_cipher.c
deleted file mode 100644
index 177fc1fb739a..000000000000
--- a/crypto/openssl/crypto/engine/tb_cipher.c
+++ /dev/null
@@ -1,143 +0,0 @@
-/* ====================================================================
- * Copyright (c) 2000 The OpenSSL Project.  All rights reserved.
- *
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions
- * are met:
- *
- * 1. Redistributions of source code must retain the above copyright
- *    notice, this list of conditions and the following disclaimer. 
- *
- * 2. Redistributions in binary form must reproduce the above copyright
- *    notice, this list of conditions and the following disclaimer in
- *    the documentation and/or other materials provided with the
- *    distribution.
- *
- * 3. All advertising materials mentioning features or use of this
- *    software must display the following acknowledgment:
- *    "This product includes software developed by the OpenSSL Project
- *    for use in the OpenSSL Toolkit. (http://www.OpenSSL.org/)"
- *
- * 4. The names "OpenSSL Toolkit" and "OpenSSL Project" must not be used to
- *    endorse or promote products derived from this software without
- *    prior written permission. For written permission, please contact
- *    licensing@OpenSSL.org.
- *
- * 5. Products derived from this software may not be called "OpenSSL"
- *    nor may "OpenSSL" appear in their names without prior written
- *    permission of the OpenSSL Project.
- *
- * 6. Redistributions of any form whatsoever must retain the following
- *    acknowledgment:
- *    "This product includes software developed by the OpenSSL Project
- *    for use in the OpenSSL Toolkit (http://www.OpenSSL.org/)"
- *
- * THIS SOFTWARE IS PROVIDED BY THE OpenSSL PROJECT ``AS IS'' AND ANY
- * EXPRESSED OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
- * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR
- * PURPOSE ARE DISCLAIMED.  IN NO EVENT SHALL THE OpenSSL PROJECT OR
- * ITS CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
- * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
- * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
- * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
- * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
- * STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
- * ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED
- * OF THE POSSIBILITY OF SUCH DAMAGE.
- * ====================================================================
- *
- * This product includes cryptographic software written by Eric Young
- * (eay@cryptsoft.com).  This product includes software written by Tim
- * Hudson (tjh@cryptsoft.com).
- *
- */
-
-#include "eng_int.h"
-
-/* If this symbol is defined then ENGINE_get_cipher_engine(), the function that
- * is used by EVP to hook in cipher code and cache defaults (etc), will display
- * brief debugging summaries to stderr with the 'nid'. */
-/* #define ENGINE_CIPHER_DEBUG */
-
-static ENGINE_TABLE *cipher_table = NULL;
-
-void ENGINE_unregister_ciphers(ENGINE *e)
-	{
-	engine_table_unregister(&cipher_table, e);
-	}
-
-static void engine_unregister_all_ciphers(void)
-	{
-	engine_table_cleanup(&cipher_table);
-	}
-
-int ENGINE_register_ciphers(ENGINE *e)
-	{
-	if(e->ciphers)
-		{
-		const int *nids;
-		int num_nids = e->ciphers(e, NULL, &nids, 0);
-		if(num_nids > 0)
-			return engine_table_register(&cipher_table,
-					engine_unregister_all_ciphers, e, nids,
-					num_nids, 0);
-		}
-	return 1;
-	}
-
-void ENGINE_register_all_ciphers()
-	{
-	ENGINE *e;
-
-	for(e=ENGINE_get_first() ; e ; e=ENGINE_get_next(e))
-		ENGINE_register_ciphers(e);
-	}
-
-int ENGINE_set_default_ciphers(ENGINE *e)
-	{
-	if(e->ciphers)
-		{
-		const int *nids;
-		int num_nids = e->ciphers(e, NULL, &nids, 0);
-		if(num_nids > 0)
-			return engine_table_register(&cipher_table,
-					engine_unregister_all_ciphers, e, nids,
-					num_nids, 1);
-		}
-	return 1;
-	}
-
-/* Exposed API function to get a functional reference from the implementation
- * table (ie. try to get a functional reference from the tabled structural
- * references) for a given cipher 'nid' */
-ENGINE *ENGINE_get_cipher_engine(int nid)
-	{
-	return engine_table_select(&cipher_table, nid);
-	}
-
-/* Obtains a cipher implementation from an ENGINE functional reference */
-const EVP_CIPHER *ENGINE_get_cipher(ENGINE *e, int nid)
-	{
-	const EVP_CIPHER *ret;
-	ENGINE_CIPHERS_PTR fn = ENGINE_get_ciphers(e);
-	if(!fn || !fn(e, &ret, NULL, nid))
-		{
-		ENGINEerr(ENGINE_F_ENGINE_GET_CIPHER,
-				ENGINE_R_UNIMPLEMENTED_CIPHER);
-		return NULL;
-		}
-	return ret;
-	}
-
-/* Gets the cipher callback from an ENGINE structure */
-ENGINE_CIPHERS_PTR ENGINE_get_ciphers(const ENGINE *e)
-	{
-	return e->ciphers;
-	}
-
-/* Sets the cipher callback in an ENGINE structure */
-int ENGINE_set_ciphers(ENGINE *e, ENGINE_CIPHERS_PTR f)
-	{
-	e->ciphers = f;
-	return 1;
-	}
diff --git a/crypto/openssl/crypto/engine/tb_dh.c b/crypto/openssl/crypto/engine/tb_dh.c
deleted file mode 100644
index 6e9d42876104..000000000000
--- a/crypto/openssl/crypto/engine/tb_dh.c
+++ /dev/null
@@ -1,118 +0,0 @@
-/* ====================================================================
- * Copyright (c) 2000 The OpenSSL Project.  All rights reserved.
- *
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions
- * are met:
- *
- * 1. Redistributions of source code must retain the above copyright
- *    notice, this list of conditions and the following disclaimer. 
- *
- * 2. Redistributions in binary form must reproduce the above copyright
- *    notice, this list of conditions and the following disclaimer in
- *    the documentation and/or other materials provided with the
- *    distribution.
- *
- * 3. All advertising materials mentioning features or use of this
- *    software must display the following acknowledgment:
- *    "This product includes software developed by the OpenSSL Project
- *    for use in the OpenSSL Toolkit. (http://www.OpenSSL.org/)"
- *
- * 4. The names "OpenSSL Toolkit" and "OpenSSL Project" must not be used to
- *    endorse or promote products derived from this software without
- *    prior written permission. For written permission, please contact
- *    licensing@OpenSSL.org.
- *
- * 5. Products derived from this software may not be called "OpenSSL"
- *    nor may "OpenSSL" appear in their names without prior written
- *    permission of the OpenSSL Project.
- *
- * 6. Redistributions of any form whatsoever must retain the following
- *    acknowledgment:
- *    "This product includes software developed by the OpenSSL Project
- *    for use in the OpenSSL Toolkit (http://www.OpenSSL.org/)"
- *
- * THIS SOFTWARE IS PROVIDED BY THE OpenSSL PROJECT ``AS IS'' AND ANY
- * EXPRESSED OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
- * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR
- * PURPOSE ARE DISCLAIMED.  IN NO EVENT SHALL THE OpenSSL PROJECT OR
- * ITS CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
- * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
- * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
- * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
- * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
- * STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
- * ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED
- * OF THE POSSIBILITY OF SUCH DAMAGE.
- * ====================================================================
- *
- * This product includes cryptographic software written by Eric Young
- * (eay@cryptsoft.com).  This product includes software written by Tim
- * Hudson (tjh@cryptsoft.com).
- *
- */
-
-#include "eng_int.h"
-
-/* If this symbol is defined then ENGINE_get_default_DH(), the function that is
- * used by DH to hook in implementation code and cache defaults (etc), will
- * display brief debugging summaries to stderr with the 'nid'. */
-/* #define ENGINE_DH_DEBUG */
-
-static ENGINE_TABLE *dh_table = NULL;
-static const int dummy_nid = 1;
-
-void ENGINE_unregister_DH(ENGINE *e)
-	{
-	engine_table_unregister(&dh_table, e);
-	}
-
-static void engine_unregister_all_DH(void)
-	{
-	engine_table_cleanup(&dh_table);
-	}
-
-int ENGINE_register_DH(ENGINE *e)
-	{
-	if(e->dh_meth)
-		return engine_table_register(&dh_table,
-				engine_unregister_all_DH, e, &dummy_nid, 1, 0);
-	return 1;
-	}
-
-void ENGINE_register_all_DH()
-	{
-	ENGINE *e;
-
-	for(e=ENGINE_get_first() ; e ; e=ENGINE_get_next(e))
-		ENGINE_register_DH(e);
-	}
-
-int ENGINE_set_default_DH(ENGINE *e)
-	{
-	if(e->dh_meth)
-		return engine_table_register(&dh_table,
-				engine_unregister_all_DH, e, &dummy_nid, 1, 1);
-	return 1;
-	}
-
-/* Exposed API function to get a functional reference from the implementation
- * table (ie. try to get a functional reference from the tabled structural
- * references). */
-ENGINE *ENGINE_get_default_DH(void)
-	{
-	return engine_table_select(&dh_table, dummy_nid);
-	}
-
-/* Obtains an DH implementation from an ENGINE functional reference */
-const DH_METHOD *ENGINE_get_DH(const ENGINE *e)
-	{
-	return e->dh_meth;
-	}
-
-/* Sets an DH implementation in an ENGINE structure */
-int ENGINE_set_DH(ENGINE *e, const DH_METHOD *dh_meth)
-	{
-	e->dh_meth = dh_meth;
-	return 1;
-	}
diff --git a/crypto/openssl/crypto/engine/tb_digest.c b/crypto/openssl/crypto/engine/tb_digest.c
deleted file mode 100644
index d3f4bb274753..000000000000
--- a/crypto/openssl/crypto/engine/tb_digest.c
+++ /dev/null
@@ -1,143 +0,0 @@
-/* ====================================================================
- * Copyright (c) 2000 The OpenSSL Project.  All rights reserved.
- *
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions
- * are met:
- *
- * 1. Redistributions of source code must retain the above copyright
- *    notice, this list of conditions and the following disclaimer. 
- *
- * 2. Redistributions in binary form must reproduce the above copyright
- *    notice, this list of conditions and the following disclaimer in
- *    the documentation and/or other materials provided with the
- *    distribution.
- *
- * 3. All advertising materials mentioning features or use of this
- *    software must display the following acknowledgment:
- *    "This product includes software developed by the OpenSSL Project
- *    for use in the OpenSSL Toolkit. (http://www.OpenSSL.org/)"
- *
- * 4. The names "OpenSSL Toolkit" and "OpenSSL Project" must not be used to
- *    endorse or promote products derived from this software without
- *    prior written permission. For written permission, please contact
- *    licensing@OpenSSL.org.
- *
- * 5. Products derived from this software may not be called "OpenSSL"
- *    nor may "OpenSSL" appear in their names without prior written
- *    permission of the OpenSSL Project.
- *
- * 6. Redistributions of any form whatsoever must retain the following
- *    acknowledgment:
- *    "This product includes software developed by the OpenSSL Project
- *    for use in the OpenSSL Toolkit (http://www.OpenSSL.org/)"
- *
- * THIS SOFTWARE IS PROVIDED BY THE OpenSSL PROJECT ``AS IS'' AND ANY
- * EXPRESSED OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
- * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR
- * PURPOSE ARE DISCLAIMED.  IN NO EVENT SHALL THE OpenSSL PROJECT OR
- * ITS CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
- * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
- * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
- * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
- * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
- * STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
- * ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED
- * OF THE POSSIBILITY OF SUCH DAMAGE.
- * ====================================================================
- *
- * This product includes cryptographic software written by Eric Young
- * (eay@cryptsoft.com).  This product includes software written by Tim
- * Hudson (tjh@cryptsoft.com).
- *
- */
-
-#include "eng_int.h"
-
-/* If this symbol is defined then ENGINE_get_digest_engine(), the function that
- * is used by EVP to hook in digest code and cache defaults (etc), will display
- * brief debugging summaries to stderr with the 'nid'. */
-/* #define ENGINE_DIGEST_DEBUG */
-
-static ENGINE_TABLE *digest_table = NULL;
-
-void ENGINE_unregister_digests(ENGINE *e)
-	{
-	engine_table_unregister(&digest_table, e);
-	}
-
-static void engine_unregister_all_digests(void)
-	{
-	engine_table_cleanup(&digest_table);
-	}
-
-int ENGINE_register_digests(ENGINE *e)
-	{
-	if(e->digests)
-		{
-		const int *nids;
-		int num_nids = e->digests(e, NULL, &nids, 0);
-		if(num_nids > 0)
-			return engine_table_register(&digest_table,
-					engine_unregister_all_digests, e, nids,
-					num_nids, 0);
-		}
-	return 1;
-	}
-
-void ENGINE_register_all_digests()
-	{
-	ENGINE *e;
-
-	for(e=ENGINE_get_first() ; e ; e=ENGINE_get_next(e))
-		ENGINE_register_digests(e);
-	}
-
-int ENGINE_set_default_digests(ENGINE *e)
-	{
-	if(e->digests)
-		{
-		const int *nids;
-		int num_nids = e->digests(e, NULL, &nids, 0);
-		if(num_nids > 0)
-			return engine_table_register(&digest_table,
-					engine_unregister_all_digests, e, nids,
-					num_nids, 1);
-		}
-	return 1;
-	}
-
-/* Exposed API function to get a functional reference from the implementation
- * table (ie. try to get a functional reference from the tabled structural
- * references) for a given digest 'nid' */
-ENGINE *ENGINE_get_digest_engine(int nid)
-	{
-	return engine_table_select(&digest_table, nid);
-	}
-
-/* Obtains a digest implementation from an ENGINE functional reference */
-const EVP_MD *ENGINE_get_digest(ENGINE *e, int nid)
-	{
-	const EVP_MD *ret;
-	ENGINE_DIGESTS_PTR fn = ENGINE_get_digests(e);
-	if(!fn || !fn(e, &ret, NULL, nid))
-		{
-		ENGINEerr(ENGINE_F_ENGINE_GET_DIGEST,
-				ENGINE_R_UNIMPLEMENTED_DIGEST);
-		return NULL;
-		}
-	return ret;
-	}
-
-/* Gets the digest callback from an ENGINE structure */
-ENGINE_DIGESTS_PTR ENGINE_get_digests(const ENGINE *e)
-	{
-	return e->digests;
-	}
-
-/* Sets the digest callback in an ENGINE structure */
-int ENGINE_set_digests(ENGINE *e, ENGINE_DIGESTS_PTR f)
-	{
-	e->digests = f;
-	return 1;
-	}
diff --git a/crypto/openssl/crypto/engine/tb_dsa.c b/crypto/openssl/crypto/engine/tb_dsa.c
deleted file mode 100644
index e4674f5f0714..000000000000
--- a/crypto/openssl/crypto/engine/tb_dsa.c
+++ /dev/null
@@ -1,118 +0,0 @@
-/* ====================================================================
- * Copyright (c) 2000 The OpenSSL Project.  All rights reserved.
- *
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions
- * are met:
- *
- * 1. Redistributions of source code must retain the above copyright
- *    notice, this list of conditions and the following disclaimer. 
- *
- * 2. Redistributions in binary form must reproduce the above copyright
- *    notice, this list of conditions and the following disclaimer in
- *    the documentation and/or other materials provided with the
- *    distribution.
- *
- * 3. All advertising materials mentioning features or use of this
- *    software must display the following acknowledgment:
- *    "This product includes software developed by the OpenSSL Project
- *    for use in the OpenSSL Toolkit. (http://www.OpenSSL.org/)"
- *
- * 4. The names "OpenSSL Toolkit" and "OpenSSL Project" must not be used to
- *    endorse or promote products derived from this software without
- *    prior written permission. For written permission, please contact
- *    licensing@OpenSSL.org.
- *
- * 5. Products derived from this software may not be called "OpenSSL"
- *    nor may "OpenSSL" appear in their names without prior written
- *    permission of the OpenSSL Project.
- *
- * 6. Redistributions of any form whatsoever must retain the following
- *    acknowledgment:
- *    "This product includes software developed by the OpenSSL Project
- *    for use in the OpenSSL Toolkit (http://www.OpenSSL.org/)"
- *
- * THIS SOFTWARE IS PROVIDED BY THE OpenSSL PROJECT ``AS IS'' AND ANY
- * EXPRESSED OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
- * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR
- * PURPOSE ARE DISCLAIMED.  IN NO EVENT SHALL THE OpenSSL PROJECT OR
- * ITS CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
- * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
- * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
- * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
- * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
- * STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
- * ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED
- * OF THE POSSIBILITY OF SUCH DAMAGE.
- * ====================================================================
- *
- * This product includes cryptographic software written by Eric Young
- * (eay@cryptsoft.com).  This product includes software written by Tim
- * Hudson (tjh@cryptsoft.com).
- *
- */
-
-#include "eng_int.h"
-
-/* If this symbol is defined then ENGINE_get_default_DSA(), the function that is
- * used by DSA to hook in implementation code and cache defaults (etc), will
- * display brief debugging summaries to stderr with the 'nid'. */
-/* #define ENGINE_DSA_DEBUG */
-
-static ENGINE_TABLE *dsa_table = NULL;
-static const int dummy_nid = 1;
-
-void ENGINE_unregister_DSA(ENGINE *e)
-	{
-	engine_table_unregister(&dsa_table, e);
-	}
-
-static void engine_unregister_all_DSA(void)
-	{
-	engine_table_cleanup(&dsa_table);
-	}
-
-int ENGINE_register_DSA(ENGINE *e)
-	{
-	if(e->dsa_meth)
-		return engine_table_register(&dsa_table,
-				engine_unregister_all_DSA, e, &dummy_nid, 1, 0);
-	return 1;
-	}
-
-void ENGINE_register_all_DSA()
-	{
-	ENGINE *e;
-
-	for(e=ENGINE_get_first() ; e ; e=ENGINE_get_next(e))
-		ENGINE_register_DSA(e);
-	}
-
-int ENGINE_set_default_DSA(ENGINE *e)
-	{
-	if(e->dsa_meth)
-		return engine_table_register(&dsa_table,
-				engine_unregister_all_DSA, e, &dummy_nid, 1, 1);
-	return 1;
-	}
-
-/* Exposed API function to get a functional reference from the implementation
- * table (ie. try to get a functional reference from the tabled structural
- * references). */
-ENGINE *ENGINE_get_default_DSA(void)
-	{
-	return engine_table_select(&dsa_table, dummy_nid);
-	}
-
-/* Obtains an DSA implementation from an ENGINE functional reference */
-const DSA_METHOD *ENGINE_get_DSA(const ENGINE *e)
-	{
-	return e->dsa_meth;
-	}
-
-/* Sets an DSA implementation in an ENGINE structure */
-int ENGINE_set_DSA(ENGINE *e, const DSA_METHOD *dsa_meth)
-	{
-	e->dsa_meth = dsa_meth;
-	return 1;
-	}
diff --git a/crypto/openssl/crypto/engine/tb_ecdh.c b/crypto/openssl/crypto/engine/tb_ecdh.c
deleted file mode 100644
index c8ec7812c55f..000000000000
--- a/crypto/openssl/crypto/engine/tb_ecdh.c
+++ /dev/null
@@ -1,133 +0,0 @@
-/* crypto/engine/tb_ecdh.c */
-/* ====================================================================
- * Copyright 2002 Sun Microsystems, Inc. ALL RIGHTS RESERVED.
- *
- * The Elliptic Curve Public-Key Crypto Library (ECC Code) included
- * herein is developed by SUN MICROSYSTEMS, INC., and is contributed
- * to the OpenSSL project.
- *
- * The ECC Code is licensed pursuant to the OpenSSL open source
- * license provided below.
- *
- * The ECDH engine software is originally written by Nils Gura and
- * Douglas Stebila of Sun Microsystems Laboratories.
- *
- */
-/* ====================================================================
- * Copyright (c) 2000-2002 The OpenSSL Project.  All rights reserved.
- *
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions
- * are met:
- *
- * 1. Redistributions of source code must retain the above copyright
- *    notice, this list of conditions and the following disclaimer. 
- *
- * 2. Redistributions in binary form must reproduce the above copyright
- *    notice, this list of conditions and the following disclaimer in
- *    the documentation and/or other materials provided with the
- *    distribution.
- *
- * 3. All advertising materials mentioning features or use of this
- *    software must display the following acknowledgment:
- *    "This product includes software developed by the OpenSSL Project
- *    for use in the OpenSSL Toolkit. (http://www.OpenSSL.org/)"
- *
- * 4. The names "OpenSSL Toolkit" and "OpenSSL Project" must not be used to
- *    endorse or promote products derived from this software without
- *    prior written permission. For written permission, please contact
- *    licensing@OpenSSL.org.
- *
- * 5. Products derived from this software may not be called "OpenSSL"
- *    nor may "OpenSSL" appear in their names without prior written
- *    permission of the OpenSSL Project.
- *
- * 6. Redistributions of any form whatsoever must retain the following
- *    acknowledgment:
- *    "This product includes software developed by the OpenSSL Project
- *    for use in the OpenSSL Toolkit (http://www.OpenSSL.org/)"
- *
- * THIS SOFTWARE IS PROVIDED BY THE OpenSSL PROJECT ``AS IS'' AND ANY
- * EXPRESSED OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
- * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR
- * PURPOSE ARE DISCLAIMED.  IN NO EVENT SHALL THE OpenSSL PROJECT OR
- * ITS CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
- * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
- * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
- * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
- * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
- * STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
- * ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED
- * OF THE POSSIBILITY OF SUCH DAMAGE.
- * ====================================================================
- *
- * This product includes cryptographic software written by Eric Young
- * (eay@cryptsoft.com).  This product includes software written by Tim
- * Hudson (tjh@cryptsoft.com).
- *
- */
-
-#include "eng_int.h"
-
-/* If this symbol is defined then ENGINE_get_default_ECDH(), the function that is
- * used by ECDH to hook in implementation code and cache defaults (etc), will
- * display brief debugging summaries to stderr with the 'nid'. */
-/* #define ENGINE_ECDH_DEBUG */
-
-static ENGINE_TABLE *ecdh_table = NULL;
-static const int dummy_nid = 1;
-
-void ENGINE_unregister_ECDH(ENGINE *e)
-	{
-	engine_table_unregister(&ecdh_table, e);
-	}
-
-static void engine_unregister_all_ECDH(void)
-	{
-	engine_table_cleanup(&ecdh_table);
-	}
-
-int ENGINE_register_ECDH(ENGINE *e)
-	{
-	if(e->ecdh_meth)
-		return engine_table_register(&ecdh_table,
-				engine_unregister_all_ECDH, e, &dummy_nid, 1, 0);
-	return 1;
-	}
-
-void ENGINE_register_all_ECDH()
-	{
-	ENGINE *e;
-
-	for(e=ENGINE_get_first() ; e ; e=ENGINE_get_next(e))
-		ENGINE_register_ECDH(e);
-	}
-
-int ENGINE_set_default_ECDH(ENGINE *e)
-	{
-	if(e->ecdh_meth)
-		return engine_table_register(&ecdh_table,
-				engine_unregister_all_ECDH, e, &dummy_nid, 1, 1);
-	return 1;
-	}
-
-/* Exposed API function to get a functional reference from the implementation
- * table (ie. try to get a functional reference from the tabled structural
- * references). */
-ENGINE *ENGINE_get_default_ECDH(void)
-	{
-	return engine_table_select(&ecdh_table, dummy_nid);
-	}
-
-/* Obtains an ECDH implementation from an ENGINE functional reference */
-const ECDH_METHOD *ENGINE_get_ECDH(const ENGINE *e)
-	{
-	return e->ecdh_meth;
-	}
-
-/* Sets an ECDH implementation in an ENGINE structure */
-int ENGINE_set_ECDH(ENGINE *e, const ECDH_METHOD *ecdh_meth)
-	{
-	e->ecdh_meth = ecdh_meth;
-	return 1;
-	}
diff --git a/crypto/openssl/crypto/engine/tb_ecdsa.c b/crypto/openssl/crypto/engine/tb_ecdsa.c
deleted file mode 100644
index 005ecb622c21..000000000000
--- a/crypto/openssl/crypto/engine/tb_ecdsa.c
+++ /dev/null
@@ -1,118 +0,0 @@
-/* ====================================================================
- * Copyright (c) 2000-2002 The OpenSSL Project.  All rights reserved.
- *
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions
- * are met:
- *
- * 1. Redistributions of source code must retain the above copyright
- *    notice, this list of conditions and the following disclaimer. 
- *
- * 2. Redistributions in binary form must reproduce the above copyright
- *    notice, this list of conditions and the following disclaimer in
- *    the documentation and/or other materials provided with the
- *    distribution.
- *
- * 3. All advertising materials mentioning features or use of this
- *    software must display the following acknowledgment:
- *    "This product includes software developed by the OpenSSL Project
- *    for use in the OpenSSL Toolkit. (http://www.OpenSSL.org/)"
- *
- * 4. The names "OpenSSL Toolkit" and "OpenSSL Project" must not be used to
- *    endorse or promote products derived from this software without
- *    prior written permission. For written permission, please contact
- *    licensing@OpenSSL.org.
- *
- * 5. Products derived from this software may not be called "OpenSSL"
- *    nor may "OpenSSL" appear in their names without prior written
- *    permission of the OpenSSL Project.
- *
- * 6. Redistributions of any form whatsoever must retain the following
- *    acknowledgment:
- *    "This product includes software developed by the OpenSSL Project
- *    for use in the OpenSSL Toolkit (http://www.OpenSSL.org/)"
- *
- * THIS SOFTWARE IS PROVIDED BY THE OpenSSL PROJECT ``AS IS'' AND ANY
- * EXPRESSED OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
- * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR
- * PURPOSE ARE DISCLAIMED.  IN NO EVENT SHALL THE OpenSSL PROJECT OR
- * ITS CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
- * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
- * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
- * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
- * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
- * STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
- * ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED
- * OF THE POSSIBILITY OF SUCH DAMAGE.
- * ====================================================================
- *
- * This product includes cryptographic software written by Eric Young
- * (eay@cryptsoft.com).  This product includes software written by Tim
- * Hudson (tjh@cryptsoft.com).
- *
- */
-
-#include "eng_int.h"
-
-/* If this symbol is defined then ENGINE_get_default_ECDSA(), the function that is
- * used by ECDSA to hook in implementation code and cache defaults (etc), will
- * display brief debugging summaries to stderr with the 'nid'. */
-/* #define ENGINE_ECDSA_DEBUG */
-
-static ENGINE_TABLE *ecdsa_table = NULL;
-static const int dummy_nid = 1;
-
-void ENGINE_unregister_ECDSA(ENGINE *e)
-	{
-	engine_table_unregister(&ecdsa_table, e);
-	}
-
-static void engine_unregister_all_ECDSA(void)
-	{
-	engine_table_cleanup(&ecdsa_table);
-	}
-
-int ENGINE_register_ECDSA(ENGINE *e)
-	{
-	if(e->ecdsa_meth)
-		return engine_table_register(&ecdsa_table,
-				engine_unregister_all_ECDSA, e, &dummy_nid, 1, 0);
-	return 1;
-	}
-
-void ENGINE_register_all_ECDSA()
-	{
-	ENGINE *e;
-
-	for(e=ENGINE_get_first() ; e ; e=ENGINE_get_next(e))
-		ENGINE_register_ECDSA(e);
-	}
-
-int ENGINE_set_default_ECDSA(ENGINE *e)
-	{
-	if(e->ecdsa_meth)
-		return engine_table_register(&ecdsa_table,
-				engine_unregister_all_ECDSA, e, &dummy_nid, 1, 1);
-	return 1;
-	}
-
-/* Exposed API function to get a functional reference from the implementation
- * table (ie. try to get a functional reference from the tabled structural
- * references). */
-ENGINE *ENGINE_get_default_ECDSA(void)
-	{
-	return engine_table_select(&ecdsa_table, dummy_nid);
-	}
-
-/* Obtains an ECDSA implementation from an ENGINE functional reference */
-const ECDSA_METHOD *ENGINE_get_ECDSA(const ENGINE *e)
-	{
-	return e->ecdsa_meth;
-	}
-
-/* Sets an ECDSA implementation in an ENGINE structure */
-int ENGINE_set_ECDSA(ENGINE *e, const ECDSA_METHOD *ecdsa_meth)
-	{
-	e->ecdsa_meth = ecdsa_meth;
-	return 1;
-	}
diff --git a/crypto/openssl/crypto/engine/tb_rand.c b/crypto/openssl/crypto/engine/tb_rand.c
deleted file mode 100644
index f36f67c0f6f4..000000000000
--- a/crypto/openssl/crypto/engine/tb_rand.c
+++ /dev/null
@@ -1,118 +0,0 @@
-/* ====================================================================
- * Copyright (c) 2000 The OpenSSL Project.  All rights reserved.
- *
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions
- * are met:
- *
- * 1. Redistributions of source code must retain the above copyright
- *    notice, this list of conditions and the following disclaimer. 
- *
- * 2. Redistributions in binary form must reproduce the above copyright
- *    notice, this list of conditions and the following disclaimer in
- *    the documentation and/or other materials provided with the
- *    distribution.
- *
- * 3. All advertising materials mentioning features or use of this
- *    software must display the following acknowledgment:
- *    "This product includes software developed by the OpenSSL Project
- *    for use in the OpenSSL Toolkit. (http://www.OpenSSL.org/)"
- *
- * 4. The names "OpenSSL Toolkit" and "OpenSSL Project" must not be used to
- *    endorse or promote products derived from this software without
- *    prior written permission. For written permission, please contact
- *    licensing@OpenSSL.org.
- *
- * 5. Products derived from this software may not be called "OpenSSL"
- *    nor may "OpenSSL" appear in their names without prior written
- *    permission of the OpenSSL Project.
- *
- * 6. Redistributions of any form whatsoever must retain the following
- *    acknowledgment:
- *    "This product includes software developed by the OpenSSL Project
- *    for use in the OpenSSL Toolkit (http://www.OpenSSL.org/)"
- *
- * THIS SOFTWARE IS PROVIDED BY THE OpenSSL PROJECT ``AS IS'' AND ANY
- * EXPRESSED OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
- * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR
- * PURPOSE ARE DISCLAIMED.  IN NO EVENT SHALL THE OpenSSL PROJECT OR
- * ITS CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
- * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
- * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
- * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
- * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
- * STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
- * ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED
- * OF THE POSSIBILITY OF SUCH DAMAGE.
- * ====================================================================
- *
- * This product includes cryptographic software written by Eric Young
- * (eay@cryptsoft.com).  This product includes software written by Tim
- * Hudson (tjh@cryptsoft.com).
- *
- */
-
-#include "eng_int.h"
-
-/* If this symbol is defined then ENGINE_get_default_RAND(), the function that is
- * used by RAND to hook in implementation code and cache defaults (etc), will
- * display brief debugging summaries to stderr with the 'nid'. */
-/* #define ENGINE_RAND_DEBUG */
-
-static ENGINE_TABLE *rand_table = NULL;
-static const int dummy_nid = 1;
-
-void ENGINE_unregister_RAND(ENGINE *e)
-	{
-	engine_table_unregister(&rand_table, e);
-	}
-
-static void engine_unregister_all_RAND(void)
-	{
-	engine_table_cleanup(&rand_table);
-	}
-
-int ENGINE_register_RAND(ENGINE *e)
-	{
-	if(e->rand_meth)
-		return engine_table_register(&rand_table,
-				engine_unregister_all_RAND, e, &dummy_nid, 1, 0);
-	return 1;
-	}
-
-void ENGINE_register_all_RAND()
-	{
-	ENGINE *e;
-
-	for(e=ENGINE_get_first() ; e ; e=ENGINE_get_next(e))
-		ENGINE_register_RAND(e);
-	}
-
-int ENGINE_set_default_RAND(ENGINE *e)
-	{
-	if(e->rand_meth)
-		return engine_table_register(&rand_table,
-				engine_unregister_all_RAND, e, &dummy_nid, 1, 1);
-	return 1;
-	}
-
-/* Exposed API function to get a functional reference from the implementation
- * table (ie. try to get a functional reference from the tabled structural
- * references). */
-ENGINE *ENGINE_get_default_RAND(void)
-	{
-	return engine_table_select(&rand_table, dummy_nid);
-	}
-
-/* Obtains an RAND implementation from an ENGINE functional reference */
-const RAND_METHOD *ENGINE_get_RAND(const ENGINE *e)
-	{
-	return e->rand_meth;
-	}
-
-/* Sets an RAND implementation in an ENGINE structure */
-int ENGINE_set_RAND(ENGINE *e, const RAND_METHOD *rand_meth)
-	{
-	e->rand_meth = rand_meth;
-	return 1;
-	}
diff --git a/crypto/openssl/crypto/engine/tb_rsa.c b/crypto/openssl/crypto/engine/tb_rsa.c
deleted file mode 100644
index fbc707fd26c9..000000000000
--- a/crypto/openssl/crypto/engine/tb_rsa.c
+++ /dev/null
@@ -1,118 +0,0 @@
-/* ====================================================================
- * Copyright (c) 2000 The OpenSSL Project.  All rights reserved.
- *
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions
- * are met:
- *
- * 1. Redistributions of source code must retain the above copyright
- *    notice, this list of conditions and the following disclaimer. 
- *
- * 2. Redistributions in binary form must reproduce the above copyright
- *    notice, this list of conditions and the following disclaimer in
- *    the documentation and/or other materials provided with the
- *    distribution.
- *
- * 3. All advertising materials mentioning features or use of this
- *    software must display the following acknowledgment:
- *    "This product includes software developed by the OpenSSL Project
- *    for use in the OpenSSL Toolkit. (http://www.OpenSSL.org/)"
- *
- * 4. The names "OpenSSL Toolkit" and "OpenSSL Project" must not be used to
- *    endorse or promote products derived from this software without
- *    prior written permission. For written permission, please contact
- *    licensing@OpenSSL.org.
- *
- * 5. Products derived from this software may not be called "OpenSSL"
- *    nor may "OpenSSL" appear in their names without prior written
- *    permission of the OpenSSL Project.
- *
- * 6. Redistributions of any form whatsoever must retain the following
- *    acknowledgment:
- *    "This product includes software developed by the OpenSSL Project
- *    for use in the OpenSSL Toolkit (http://www.OpenSSL.org/)"
- *
- * THIS SOFTWARE IS PROVIDED BY THE OpenSSL PROJECT ``AS IS'' AND ANY
- * EXPRESSED OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
- * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR
- * PURPOSE ARE DISCLAIMED.  IN NO EVENT SHALL THE OpenSSL PROJECT OR
- * ITS CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
- * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
- * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
- * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
- * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
- * STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
- * ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED
- * OF THE POSSIBILITY OF SUCH DAMAGE.
- * ====================================================================
- *
- * This product includes cryptographic software written by Eric Young
- * (eay@cryptsoft.com).  This product includes software written by Tim
- * Hudson (tjh@cryptsoft.com).
- *
- */
-
-#include "eng_int.h"
-
-/* If this symbol is defined then ENGINE_get_default_RSA(), the function that is
- * used by RSA to hook in implementation code and cache defaults (etc), will
- * display brief debugging summaries to stderr with the 'nid'. */
-/* #define ENGINE_RSA_DEBUG */
-
-static ENGINE_TABLE *rsa_table = NULL;
-static const int dummy_nid = 1;
-
-void ENGINE_unregister_RSA(ENGINE *e)
-	{
-	engine_table_unregister(&rsa_table, e);
-	}
-
-static void engine_unregister_all_RSA(void)
-	{
-	engine_table_cleanup(&rsa_table);
-	}
-
-int ENGINE_register_RSA(ENGINE *e)
-	{
-	if(e->rsa_meth)
-		return engine_table_register(&rsa_table,
-				engine_unregister_all_RSA, e, &dummy_nid, 1, 0);
-	return 1;
-	}
-
-void ENGINE_register_all_RSA()
-	{
-	ENGINE *e;
-
-	for(e=ENGINE_get_first() ; e ; e=ENGINE_get_next(e))
-		ENGINE_register_RSA(e);
-	}
-
-int ENGINE_set_default_RSA(ENGINE *e)
-	{
-	if(e->rsa_meth)
-		return engine_table_register(&rsa_table,
-				engine_unregister_all_RSA, e, &dummy_nid, 1, 1);
-	return 1;
-	}
-
-/* Exposed API function to get a functional reference from the implementation
- * table (ie. try to get a functional reference from the tabled structural
- * references). */
-ENGINE *ENGINE_get_default_RSA(void)
-	{
-	return engine_table_select(&rsa_table, dummy_nid);
-	}
-
-/* Obtains an RSA implementation from an ENGINE functional reference */
-const RSA_METHOD *ENGINE_get_RSA(const ENGINE *e)
-	{
-	return e->rsa_meth;
-	}
-
-/* Sets an RSA implementation in an ENGINE structure */
-int ENGINE_set_RSA(ENGINE *e, const RSA_METHOD *rsa_meth)
-	{
-	e->rsa_meth = rsa_meth;
-	return 1;
-	}
diff --git a/crypto/openssl/crypto/engine/tb_store.c b/crypto/openssl/crypto/engine/tb_store.c
deleted file mode 100644
index 8cc435c935f2..000000000000
--- a/crypto/openssl/crypto/engine/tb_store.c
+++ /dev/null
@@ -1,123 +0,0 @@
-/* ====================================================================
- * Copyright (c) 2003 The OpenSSL Project.  All rights reserved.
- *
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions
- * are met:
- *
- * 1. Redistributions of source code must retain the above copyright
- *    notice, this list of conditions and the following disclaimer. 
- *
- * 2. Redistributions in binary form must reproduce the above copyright
- *    notice, this list of conditions and the following disclaimer in
- *    the documentation and/or other materials provided with the
- *    distribution.
- *
- * 3. All advertising materials mentioning features or use of this
- *    software must display the following acknowledgment:
- *    "This product includes software developed by the OpenSSL Project
- *    for use in the OpenSSL Toolkit. (http://www.OpenSSL.org/)"
- *
- * 4. The names "OpenSSL Toolkit" and "OpenSSL Project" must not be used to
- *    endorse or promote products derived from this software without
- *    prior written permission. For written permission, please contact
- *    licensing@OpenSSL.org.
- *
- * 5. Products derived from this software may not be called "OpenSSL"
- *    nor may "OpenSSL" appear in their names without prior written
- *    permission of the OpenSSL Project.
- *
- * 6. Redistributions of any form whatsoever must retain the following
- *    acknowledgment:
- *    "This product includes software developed by the OpenSSL Project
- *    for use in the OpenSSL Toolkit (http://www.OpenSSL.org/)"
- *
- * THIS SOFTWARE IS PROVIDED BY THE OpenSSL PROJECT ``AS IS'' AND ANY
- * EXPRESSED OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
- * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR
- * PURPOSE ARE DISCLAIMED.  IN NO EVENT SHALL THE OpenSSL PROJECT OR
- * ITS CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
- * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
- * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
- * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
- * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
- * STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
- * ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED
- * OF THE POSSIBILITY OF SUCH DAMAGE.
- * ====================================================================
- *
- * This product includes cryptographic software written by Eric Young
- * (eay@cryptsoft.com).  This product includes software written by Tim
- * Hudson (tjh@cryptsoft.com).
- *
- */
-
-#include "eng_int.h"
-
-/* If this symbol is defined then ENGINE_get_default_STORE(), the function that is
- * used by STORE to hook in implementation code and cache defaults (etc), will
- * display brief debugging summaries to stderr with the 'nid'. */
-/* #define ENGINE_STORE_DEBUG */
-
-static ENGINE_TABLE *store_table = NULL;
-static const int dummy_nid = 1;
-
-void ENGINE_unregister_STORE(ENGINE *e)
-	{
-	engine_table_unregister(&store_table, e);
-	}
-
-static void engine_unregister_all_STORE(void)
-	{
-	engine_table_cleanup(&store_table);
-	}
-
-int ENGINE_register_STORE(ENGINE *e)
-	{
-	if(e->store_meth)
-		return engine_table_register(&store_table,
-				engine_unregister_all_STORE, e, &dummy_nid, 1, 0);
-	return 1;
-	}
-
-void ENGINE_register_all_STORE()
-	{
-	ENGINE *e;
-
-	for(e=ENGINE_get_first() ; e ; e=ENGINE_get_next(e))
-		ENGINE_register_STORE(e);
-	}
-
-/* The following two functions are removed because they're useless. */
-#if 0
-int ENGINE_set_default_STORE(ENGINE *e)
-	{
-	if(e->store_meth)
-		return engine_table_register(&store_table,
-				engine_unregister_all_STORE, e, &dummy_nid, 1, 1);
-	return 1;
-	}
-#endif
-
-#if 0
-/* Exposed API function to get a functional reference from the implementation
- * table (ie. try to get a functional reference from the tabled structural
- * references). */
-ENGINE *ENGINE_get_default_STORE(void)
-	{
-	return engine_table_select(&store_table, dummy_nid);
-	}
-#endif
-
-/* Obtains an STORE implementation from an ENGINE functional reference */
-const STORE_METHOD *ENGINE_get_STORE(const ENGINE *e)
-	{
-	return e->store_meth;
-	}
-
-/* Sets an STORE implementation in an ENGINE structure */
-int ENGINE_set_STORE(ENGINE *e, const STORE_METHOD *store_meth)
-	{
-	e->store_meth = store_meth;
-	return 1;
-	}
diff --git a/crypto/openssl/crypto/engine/vendor_defns/aep.h b/crypto/openssl/crypto/engine/vendor_defns/aep.h
deleted file mode 100644
index 2b2792d2d6ff..000000000000
--- a/crypto/openssl/crypto/engine/vendor_defns/aep.h
+++ /dev/null
@@ -1,178 +0,0 @@
-/* This header declares the necessary definitions for using the exponentiation
- * acceleration capabilities, and rnd number generation of the AEP card. 
- *
- */
-
-/*
- *
- * Some AEP defines
- *
- */
-
-/*Successful return value*/
-#define AEP_R_OK                                0x00000000
-
-/*Miscelleanous unsuccessful return value*/
-#define AEP_R_GENERAL_ERROR                     0x10000001
-
-/*Insufficient host memory*/
-#define AEP_R_HOST_MEMORY                       0x10000002
-
-#define AEP_R_FUNCTION_FAILED                   0x10000006
-
-/*Invalid arguments in function call*/
-#define AEP_R_ARGUMENTS_BAD                     0x10020000
-
-#define AEP_R_NO_TARGET_RESOURCES				0x10030000
-
-/*Error occuring on socket operation*/
-#define AEP_R_SOCKERROR							0x10000010
-
-/*Socket has been closed from the other end*/
-#define AEP_R_SOCKEOF							0x10000011
-
-/*Invalid handles*/
-#define AEP_R_CONNECTION_HANDLE_INVALID         0x100000B3
-
-#define AEP_R_TRANSACTION_HANDLE_INVALID		0x10040000
-
-/*Transaction has not yet returned from accelerator*/
-#define AEP_R_TRANSACTION_NOT_READY				0x00010000
-
-/*There is already a thread waiting on this transaction*/
-#define AEP_R_TRANSACTION_CLAIMED				0x10050000
-
-/*The transaction timed out*/
-#define AEP_R_TIMED_OUT							0x10060000
-
-#define AEP_R_FXN_NOT_IMPLEMENTED				0x10070000
-
-#define AEP_R_TARGET_ERROR						0x10080000
-
-/*Error in the AEP daemon process*/
-#define AEP_R_DAEMON_ERROR						0x10090000
-
-/*Invalid ctx id*/
-#define AEP_R_INVALID_CTX_ID					0x10009000
-
-#define AEP_R_NO_KEY_MANAGER					0x1000a000
-
-/*Error obtaining a mutex*/
-#define AEP_R_MUTEX_BAD                         0x000001A0
-
-/*Fxn call before AEP_Initialise ot after AEP_Finialise*/
-#define AEP_R_AEPAPI_NOT_INITIALIZED			0x10000190
-
-/*AEP_Initialise has already been called*/
-#define AEP_R_AEPAPI_ALREADY_INITIALIZED		0x10000191
-
-/*Maximum number of connections to daemon reached*/
-#define AEP_R_NO_MORE_CONNECTION_HNDLS			0x10000200
-
-/*
- *
- * Some AEP Type definitions
- *
- */
-
-/* an unsigned 8-bit value */
-typedef unsigned char				AEP_U8;
-
-/* an unsigned 8-bit character */
-typedef char					AEP_CHAR;
-
-/* a BYTE-sized Boolean flag */
-typedef AEP_U8					AEP_BBOOL;
-
-/*Unsigned value, at least 16 bits long*/
-typedef unsigned short				AEP_U16;
-
-/* an unsigned value, at least 32 bits long */
-#ifdef SIXTY_FOUR_BIT_LONG
-typedef unsigned int				AEP_U32;
-#else
-typedef unsigned long				AEP_U32;
-#endif
-
-#ifdef SIXTY_FOUR_BIT_LONG
-typedef unsigned long				AEP_U64;
-#else
-typedef struct { unsigned long l1, l2; }	AEP_U64;
-#endif
-
-/* at least 32 bits; each bit is a Boolean flag */
-typedef AEP_U32			AEP_FLAGS;
-
-typedef AEP_U8	    	*AEP_U8_PTR;
-typedef AEP_CHAR    	*AEP_CHAR_PTR;
-typedef AEP_U32			*AEP_U32_PTR;
-typedef AEP_U64			*AEP_U64_PTR;
-typedef void        	*AEP_VOID_PTR;
-
-/* Pointer to a AEP_VOID_PTR-- i.e., pointer to pointer to void */
-typedef AEP_VOID_PTR 	*AEP_VOID_PTR_PTR;
-
-/*Used to identify an AEP connection handle*/
-typedef AEP_U32					AEP_CONNECTION_HNDL;
-
-/*Pointer to an AEP connection handle*/
-typedef AEP_CONNECTION_HNDL 	*AEP_CONNECTION_HNDL_PTR;
-
-/*Used by an application (in conjunction with the apps process id) to 
-identify an individual transaction*/
-typedef AEP_U32					AEP_TRANSACTION_ID;
-
-/*Pointer to an applications transaction identifier*/
-typedef AEP_TRANSACTION_ID 		*AEP_TRANSACTION_ID_PTR;
-
-/*Return value type*/
-typedef AEP_U32					AEP_RV;
-
-#define MAX_PROCESS_CONNECTIONS 256
-
-#define RAND_BLK_SIZE 1024
-
-typedef enum{
-        NotConnected=   0,
-        Connected=              1,
-        InUse=                  2
-} AEP_CONNECTION_STATE;
-
-
-typedef struct AEP_CONNECTION_ENTRY{
-        AEP_CONNECTION_STATE    conn_state;
-        AEP_CONNECTION_HNDL     conn_hndl;
-} AEP_CONNECTION_ENTRY;
-
-
-typedef AEP_RV t_AEP_OpenConnection(AEP_CONNECTION_HNDL_PTR phConnection);
-typedef AEP_RV t_AEP_CloseConnection(AEP_CONNECTION_HNDL hConnection);
-
-typedef AEP_RV t_AEP_ModExp(AEP_CONNECTION_HNDL hConnection,
-			    AEP_VOID_PTR pA, AEP_VOID_PTR pP,
-			    AEP_VOID_PTR pN,
-			    AEP_VOID_PTR pResult,
-			    AEP_TRANSACTION_ID* pidTransID);
-
-typedef AEP_RV t_AEP_ModExpCrt(AEP_CONNECTION_HNDL hConnection,
-			       AEP_VOID_PTR pA, AEP_VOID_PTR pP,
-			       AEP_VOID_PTR pQ,
-			       AEP_VOID_PTR pDmp1, AEP_VOID_PTR pDmq1,
-			       AEP_VOID_PTR pIqmp,
-			       AEP_VOID_PTR pResult,
-			       AEP_TRANSACTION_ID* pidTransID);
-
-#ifdef AEPRAND
-typedef AEP_RV t_AEP_GenRandom(AEP_CONNECTION_HNDL hConnection,
-			       AEP_U32 Len,
-			       AEP_U32 Type,
-			       AEP_VOID_PTR pResult,
-			       AEP_TRANSACTION_ID* pidTransID);
-#endif
-
-typedef AEP_RV t_AEP_Initialize(AEP_VOID_PTR pInitArgs);
-typedef AEP_RV t_AEP_Finalize();
-typedef AEP_RV t_AEP_SetBNCallBacks(AEP_RV (*GetBigNumSizeFunc)(),
-				    AEP_RV (*MakeAEPBigNumFunc)(),
-				    AEP_RV (*ConverAEPBigNumFunc)());
-
diff --git a/crypto/openssl/crypto/engine/vendor_defns/atalla.h b/crypto/openssl/crypto/engine/vendor_defns/atalla.h
deleted file mode 100644
index 149970d44147..000000000000
--- a/crypto/openssl/crypto/engine/vendor_defns/atalla.h
+++ /dev/null
@@ -1,48 +0,0 @@
-/* This header declares the necessary definitions for using the exponentiation
- * acceleration capabilities of Atalla cards. The only cryptographic operation
- * is performed by "ASI_RSAPrivateKeyOpFn" and this takes a structure that
- * defines an "RSA private key". However, it is really only performing a
- * regular mod_exp using the supplied modulus and exponent - no CRT form is
- * being used. Hence, it is a generic mod_exp function in disguise, and we use
- * it as such.
- *
- * Thanks to the people at Atalla for letting me know these definitions are
- * fine and that they can be reproduced here.
- *
- * Geoff.
- */
-
-typedef struct ItemStr
-	{
-	unsigned char *data;
-	int len;
-	} Item;
-
-typedef struct RSAPrivateKeyStr
-	{
-	void *reserved;
-	Item version;
-	Item modulus;
-	Item publicExponent;
-	Item privateExponent;
-	Item prime[2];
-	Item exponent[2];
-	Item coefficient;
-	} RSAPrivateKey;
-
-/* Predeclare the function pointer types that we dynamically load from the DSO.
- * These use the same names and form that Ben's original support code had (in
- * crypto/bn/bn_exp.c) unless of course I've inadvertently changed the style
- * somewhere along the way!
- */
-
-typedef int tfnASI_GetPerformanceStatistics(int reset_flag,
-					unsigned int *ret_buf);
-
-typedef int tfnASI_GetHardwareConfig(long card_num, unsigned int *ret_buf);
-
-typedef int tfnASI_RSAPrivateKeyOpFn(RSAPrivateKey * rsaKey,
-					unsigned char *output,
-					unsigned char *input,
-					unsigned int modulus_len);
-
diff --git a/crypto/openssl/crypto/engine/vendor_defns/cswift.h b/crypto/openssl/crypto/engine/vendor_defns/cswift.h
deleted file mode 100644
index 60079326bbbf..000000000000
--- a/crypto/openssl/crypto/engine/vendor_defns/cswift.h
+++ /dev/null
@@ -1,234 +0,0 @@
-/* Attribution notice: Rainbow have generously allowed me to reproduce
- * the necessary definitions here from their API. This means the support
- * can build independently of whether application builders have the
- * API or hardware. This will allow developers to easily produce software
- * that has latent hardware support for any users that have accelertors
- * installed, without the developers themselves needing anything extra.
- *
- * I have only clipped the parts from the CryptoSwift header files that
- * are (or seem) relevant to the CryptoSwift support code. This is
- * simply to keep the file sizes reasonable.
- * [Geoff]
- */
-
-
-/* NB: These type widths do *not* seem right in general, in particular
- * they're not terribly friendly to 64-bit architectures (unsigned long)
- * will be 64-bit on IA-64 for a start. I'm leaving these alone as they
- * agree with Rainbow's API and this will only be called into question
- * on platforms with Rainbow support anyway! ;-) */
-
-#ifdef __cplusplus
-extern "C" {
-#endif /* __cplusplus */
-
-typedef long              SW_STATUS;              /* status           */
-typedef unsigned char     SW_BYTE;                /* 8 bit byte       */
-typedef unsigned short    SW_U16;                 /* 16 bit number    */
-#if defined(_IRIX)
-#include <sgidefs.h>
-typedef __uint32_t        SW_U32;
-#else
-typedef unsigned long     SW_U32;                 /* 32 bit integer   */
-#endif
- 
-#if defined(OPENSSL_SYS_WIN32)
-  typedef struct _SW_U64 {
-      SW_U32 low32;
-      SW_U32 high32;
-  } SW_U64;                                         /* 64 bit integer   */
-#elif defined(OPENSSL_SYS_MACINTOSH_CLASSIC)
-  typedef longlong SW_U64
-#else /* Unix variants */
-  typedef struct _SW_U64 {
-      SW_U32 low32;
-      SW_U32 high32;
-  } SW_U64;                                         /* 64 bit integer   */
-#endif
-
-/* status codes */
-#define SW_OK                 (0L)
-#define SW_ERR_BASE           (-10000L)
-#define SW_ERR_NO_CARD        (SW_ERR_BASE-1) /* The Card is not present   */
-#define SW_ERR_CARD_NOT_READY (SW_ERR_BASE-2) /* The card has not powered  */
-                                              /*    up yet                 */
-#define SW_ERR_TIME_OUT       (SW_ERR_BASE-3) /* Execution of a command    */
-                                              /*    time out               */
-#define SW_ERR_NO_EXECUTE     (SW_ERR_BASE-4) /* The Card failed to        */
-                                              /*    execute the command    */
-#define SW_ERR_INPUT_NULL_PTR (SW_ERR_BASE-5) /* a required pointer is     */
-                                              /*    NULL                   */
-#define SW_ERR_INPUT_SIZE     (SW_ERR_BASE-6) /* size is invalid, too      */
-                                              /*    small, too large.      */
-#define SW_ERR_INVALID_HANDLE (SW_ERR_BASE-7) /* Invalid SW_ACC_CONTEXT    */
-                                              /*    handle                 */
-#define SW_ERR_PENDING        (SW_ERR_BASE-8) /* A request is already out- */
-                                              /*    standing at this       */
-                                              /*    context handle         */
-#define SW_ERR_AVAILABLE      (SW_ERR_BASE-9) /* A result is available.    */
-#define SW_ERR_NO_PENDING     (SW_ERR_BASE-10)/* No request is pending.    */
-#define SW_ERR_NO_MEMORY      (SW_ERR_BASE-11)/* Not enough memory         */
-#define SW_ERR_BAD_ALGORITHM  (SW_ERR_BASE-12)/* Invalid algorithm type    */
-                                              /*    in SW_PARAM structure  */
-#define SW_ERR_MISSING_KEY    (SW_ERR_BASE-13)/* No key is associated with */
-                                              /*    context.               */
-                                              /*    swAttachKeyParam() is  */
-                                              /*    not called.            */
-#define SW_ERR_KEY_CMD_MISMATCH \
-                              (SW_ERR_BASE-14)/* Cannot perform requested  */
-                                              /*    SW_COMMAND_CODE since  */
-                                              /*    key attached via       */
-                                              /*    swAttachKeyParam()     */
-                                              /*    cannot be used for this*/
-                                              /*    SW_COMMAND_CODE.       */
-#define SW_ERR_NOT_IMPLEMENTED \
-                              (SW_ERR_BASE-15)/* Not implemented           */
-#define SW_ERR_BAD_COMMAND    (SW_ERR_BASE-16)/* Bad command code          */
-#define SW_ERR_BAD_ITEM_SIZE  (SW_ERR_BASE-17)/* too small or too large in */
-                                              /*    the "initems" or       */
-                                              /*    "outitems".            */
-#define SW_ERR_BAD_ACCNUM     (SW_ERR_BASE-18)/* Bad accelerator number    */
-#define SW_ERR_SELFTEST_FAIL  (SW_ERR_BASE-19)/* At least one of the self  */
-                                              /*    test fail, look at the */
-                                              /*    selfTestBitmap in      */
-                                              /*    SW_ACCELERATOR_INFO for*/
-                                              /*    details.               */
-#define SW_ERR_MISALIGN       (SW_ERR_BASE-20)/* Certain alogrithms require*/
-                                              /*    key materials aligned  */
-                                              /*    in certain order, e.g. */
-                                              /*    128 bit for CRT        */
-#define SW_ERR_OUTPUT_NULL_PTR \
-                              (SW_ERR_BASE-21)/* a required pointer is     */
-                                              /*    NULL                   */
-#define SW_ERR_OUTPUT_SIZE \
-                              (SW_ERR_BASE-22)/* size is invalid, too      */
-                                              /*    small, too large.      */
-#define SW_ERR_FIRMWARE_CHECKSUM \
-                              (SW_ERR_BASE-23)/* firmware checksum mismatch*/
-                                              /*    download failed.       */
-#define SW_ERR_UNKNOWN_FIRMWARE \
-                              (SW_ERR_BASE-24)/* unknown firmware error    */
-#define SW_ERR_INTERRUPT      (SW_ERR_BASE-25)/* request is abort when     */
-                                              /*    it's waiting to be     */
-                                              /*    completed.             */
-#define SW_ERR_NVWRITE_FAIL   (SW_ERR_BASE-26)/* error in writing to Non-  */
-                                              /*    volatile memory        */
-#define SW_ERR_NVWRITE_RANGE  (SW_ERR_BASE-27)/* out of range error in     */
-                                              /*    writing to NV memory   */
-#define SW_ERR_RNG_ERROR      (SW_ERR_BASE-28)/* Random Number Generation  */
-                                              /*    failure                */
-#define SW_ERR_DSS_FAILURE    (SW_ERR_BASE-29)/* DSS Sign or Verify failure*/
-#define SW_ERR_MODEXP_FAILURE (SW_ERR_BASE-30)/* Failure in various math   */
-                                              /*    calculations           */
-#define SW_ERR_ONBOARD_MEMORY (SW_ERR_BASE-31)/* Error in accessing on -   */
-                                              /*    board memory           */
-#define SW_ERR_FIRMWARE_VERSION \
-                              (SW_ERR_BASE-32)/* Wrong version in firmware */
-                                              /*    update                 */
-#define SW_ERR_ZERO_WORKING_ACCELERATOR \
-                              (SW_ERR_BASE-44)/* All accelerators are bad  */
-
-
-  /* algorithm type */
-#define SW_ALG_CRT          1
-#define SW_ALG_EXP          2
-#define SW_ALG_DSA          3
-#define SW_ALG_NVDATA       4
-
-  /* command code */
-#define SW_CMD_MODEXP_CRT   1 /* perform Modular Exponentiation using  */
-                              /*  Chinese Remainder Theorem (CRT)      */
-#define SW_CMD_MODEXP       2 /* perform Modular Exponentiation        */
-#define SW_CMD_DSS_SIGN     3 /* perform DSS sign                      */
-#define SW_CMD_DSS_VERIFY   4 /* perform DSS verify                    */
-#define SW_CMD_RAND         5 /* perform random number generation      */
-#define SW_CMD_NVREAD       6 /* perform read to nonvolatile RAM       */
-#define SW_CMD_NVWRITE      7 /* perform write to nonvolatile RAM      */
-
-typedef SW_U32            SW_ALGTYPE;             /* alogrithm type   */
-typedef SW_U32            SW_STATE;               /* state            */
-typedef SW_U32            SW_COMMAND_CODE;        /* command code     */
-typedef SW_U32            SW_COMMAND_BITMAP[4];   /* bitmap           */
-
-typedef struct _SW_LARGENUMBER {
-    SW_U32    nbytes;       /* number of bytes in the buffer "value"  */
-    SW_BYTE*  value;        /* the large integer as a string of       */
-                            /*   bytes in network (big endian) order  */
-} SW_LARGENUMBER;               
-
-#if defined(OPENSSL_SYS_WIN32)
-    #include <windows.h>
-    typedef HANDLE          SW_OSHANDLE;          /* handle to kernel object */
-    #define SW_OS_INVALID_HANDLE  INVALID_HANDLE_VALUE
-    #define SW_CALLCONV _stdcall
-#elif defined(OPENSSL_SYS_MACINTOSH_CLASSIC)
-    /* async callback mechanisms */
-    /* swiftCallbackLevel */
-    #define SW_MAC_CALLBACK_LEVEL_NO         0		
-    #define SW_MAC_CALLBACK_LEVEL_HARDWARE   1	/* from the hardware ISR */
-    #define SW_MAC_CALLBACK_LEVEL_SECONDARY  2	/* as secondary ISR */
-    typedef int             SW_MAC_CALLBACK_LEVEL;
-    typedef int             SW_OSHANDLE;
-    #define SW_OS_INVALID_HANDLE  (-1)
-    #define SW_CALLCONV
-#else /* Unix variants */
-    typedef int             SW_OSHANDLE;          /* handle to driver */
-    #define SW_OS_INVALID_HANDLE  (-1)
-    #define SW_CALLCONV
-#endif 
-
-typedef struct _SW_CRT {
-    SW_LARGENUMBER  p;      /* prime number p                         */
-    SW_LARGENUMBER  q;      /* prime number q                         */
-    SW_LARGENUMBER  dmp1;   /* exponent1                              */
-    SW_LARGENUMBER  dmq1;   /* exponent2                              */
-    SW_LARGENUMBER  iqmp;   /* CRT coefficient                        */
-} SW_CRT;
-
-typedef struct _SW_EXP {
-    SW_LARGENUMBER  modulus; /* modulus                                */
-    SW_LARGENUMBER  exponent;/* exponent                               */
-} SW_EXP;
-
-typedef struct _SW_DSA {
-    SW_LARGENUMBER  p;      /*                                        */
-    SW_LARGENUMBER  q;      /*                                        */
-    SW_LARGENUMBER  g;      /*                                        */
-    SW_LARGENUMBER  key;    /* private/public key                     */
-} SW_DSA;
-
-typedef struct _SW_NVDATA {
-    SW_U32 accnum;          /* accelerator board number               */
-    SW_U32 offset;          /* offset in byte                         */
-} SW_NVDATA;
-
-typedef struct _SW_PARAM {
-    SW_ALGTYPE    type;     /* type of the alogrithm                  */
-    union {
-        SW_CRT    crt;
-        SW_EXP    exp;
-        SW_DSA    dsa;
-        SW_NVDATA nvdata;
-    } up;
-} SW_PARAM;
-
-typedef SW_U32 SW_CONTEXT_HANDLE; /* opaque context handle */
-
-
-/* Now the OpenSSL bits, these function types are the for the function
- * pointers that will bound into the Rainbow shared libraries. */
-typedef SW_STATUS SW_CALLCONV t_swAcquireAccContext(SW_CONTEXT_HANDLE *hac);
-typedef SW_STATUS SW_CALLCONV t_swAttachKeyParam(SW_CONTEXT_HANDLE hac,
-                                                SW_PARAM *key_params);
-typedef SW_STATUS SW_CALLCONV t_swSimpleRequest(SW_CONTEXT_HANDLE hac,
-                                                SW_COMMAND_CODE cmd,
-                				SW_LARGENUMBER pin[],
-                                		SW_U32 pin_count,
-                                                SW_LARGENUMBER pout[],
-                				SW_U32 pout_count);
-typedef SW_STATUS SW_CALLCONV t_swReleaseAccContext(SW_CONTEXT_HANDLE hac);
-
-#ifdef __cplusplus
-}
-#endif /* __cplusplus */
-
diff --git a/crypto/openssl/crypto/engine/vendor_defns/hw_4758_cca.h b/crypto/openssl/crypto/engine/vendor_defns/hw_4758_cca.h
deleted file mode 100644
index 296636e81a8b..000000000000
--- a/crypto/openssl/crypto/engine/vendor_defns/hw_4758_cca.h
+++ /dev/null
@@ -1,149 +0,0 @@
-/**********************************************************************/
-/*                                                                    */
-/*  Prototypes of the CCA verbs used by the 4758 CCA openssl driver   */
-/*                                                                    */
-/*  Maurice Gittens <maurice@gittens.nl>                              */
-/*                                                                    */
-/**********************************************************************/
-
-#ifndef __HW_4758_CCA__
-#define __HW_4758_CCA__
-
-/*
- *  Only WIN32 support for now
- */
-#if defined(WIN32)
-
-  #define CCA_LIB_NAME "CSUNSAPI"
-
-  #define CSNDPKX   "CSNDPKX_32"
-  #define CSNDKRR   "CSNDKRR_32"
-  #define CSNDPKE   "CSNDPKE_32"
-  #define CSNDPKD   "CSNDPKD_32"
-  #define CSNDDSV   "CSNDDSV_32"
-  #define CSNDDSG   "CSNDDSG_32"
-  #define CSNBRNG   "CSNBRNG_32"
-
-  #define SECURITYAPI __stdcall
-#else
-    /* Fixme!!         
-      Find out the values of these constants for other platforms.
-    */
-  #define CCA_LIB_NAME "CSUNSAPI"
-
-  #define CSNDPKX   "CSNDPKX"
-  #define CSNDKRR   "CSNDKRR"
-  #define CSNDPKE   "CSNDPKE"
-  #define CSNDPKD   "CSNDPKD"
-  #define CSNDDSV   "CSNDDSV"
-  #define CSNDDSG   "CSNDDSG"
-  #define CSNBRNG   "CSNBRNG"
-
-  #define SECURITYAPI
-#endif
-
-/*
- * security API prototypes
- */
-
-/* PKA Key Record Read */
-typedef void (SECURITYAPI *F_KEYRECORDREAD)
-             (long          * return_code,
-              long          * reason_code,
-              long          * exit_data_length,
-              unsigned char * exit_data,
-              long          * rule_array_count,
-              unsigned char * rule_array,
-              unsigned char * key_label,
-              long          * key_token_length,
-              unsigned char * key_token);
-
-/* Random Number Generate */
-typedef void (SECURITYAPI *F_RANDOMNUMBERGENERATE)
-             (long          * return_code,
-              long          * reason_code,
-              long          * exit_data_length,
-              unsigned char * exit_data,
-              unsigned char * form,
-              unsigned char * random_number);
-
-/* Digital Signature Generate */
-typedef void (SECURITYAPI *F_DIGITALSIGNATUREGENERATE)
-             (long          * return_code,
-              long          * reason_code,
-              long          * exit_data_length,
-              unsigned char * exit_data,
-              long          * rule_array_count,
-              unsigned char * rule_array,
-              long          * PKA_private_key_id_length,
-              unsigned char * PKA_private_key_id,
-              long          * hash_length,
-              unsigned char * hash,
-              long          * signature_field_length,
-              long          * signature_bit_length,
-              unsigned char * signature_field);
-
-/* Digital Signature Verify */
-typedef void (SECURITYAPI *F_DIGITALSIGNATUREVERIFY)(
-              long          * return_code,
-              long          * reason_code,
-              long          * exit_data_length,
-              unsigned char * exit_data,
-              long          * rule_array_count,
-              unsigned char * rule_array,
-              long          * PKA_public_key_id_length,
-              unsigned char * PKA_public_key_id,
-              long          * hash_length,
-              unsigned char * hash,
-              long          * signature_field_length,
-              unsigned char * signature_field);
-
-/* PKA Public Key Extract */
-typedef void (SECURITYAPI *F_PUBLICKEYEXTRACT)(
-              long          * return_code,
-              long          * reason_code,
-              long          * exit_data_length,
-              unsigned char * exit_data,
-              long          * rule_array_count,
-              unsigned char * rule_array,
-              long          * source_key_identifier_length,
-              unsigned char * source_key_identifier,
-              long          * target_key_token_length,
-              unsigned char * target_key_token);
-
-/* PKA Encrypt */
-typedef void   (SECURITYAPI *F_PKAENCRYPT)
-               (long          *  return_code,
-                 long          *  reason_code,
-                 long          *  exit_data_length,
-                 unsigned char *  exit_data,
-                 long          *  rule_array_count,
-                 unsigned char *  rule_array,
-                 long          *  key_value_length,
-                 unsigned char *  key_value,
-                 long          *  data_struct_length,
-                 unsigned char *  data_struct,
-                 long          *  RSA_public_key_length,
-                 unsigned char *  RSA_public_key,
-                 long          *  RSA_encipher_length,
-                 unsigned char *  RSA_encipher );
-
-/* PKA Decrypt */
-typedef void    (SECURITYAPI *F_PKADECRYPT)
-                (long          *  return_code,
-                 long          *  reason_code,
-                 long          *  exit_data_length,
-                 unsigned char *  exit_data,
-                 long          *  rule_array_count,
-                 unsigned char *  rule_array,
-                 long          *  enciphered_key_length,
-                 unsigned char *  enciphered_key,
-                 long          *  data_struct_length,
-                 unsigned char *  data_struct,
-                 long          *  RSA_private_key_length,
-                 unsigned char *  RSA_private_key,
-                 long          *  key_value_length,
-                 unsigned char *  key_value    );
-
-
-#endif
diff --git a/crypto/openssl/crypto/engine/vendor_defns/hw_ubsec.h b/crypto/openssl/crypto/engine/vendor_defns/hw_ubsec.h
deleted file mode 100644
index b6619d40f2fa..000000000000
--- a/crypto/openssl/crypto/engine/vendor_defns/hw_ubsec.h
+++ /dev/null
@@ -1,100 +0,0 @@
-/******************************************************************************
- *
- *  Copyright 2000
- *  Broadcom Corporation
- *  16215 Alton Parkway
- *  PO Box 57013
- *  Irvine CA 92619-7013
- *
- *****************************************************************************/
-/* 
- * Broadcom Corporation uBSec SDK 
- */
-/*
- * Character device header file.
- */
-/*
- * Revision History:
- *
- * October 2000 JTT Created.
- */
-
-#define MAX_PUBLIC_KEY_BITS (1024)
-#define MAX_PUBLIC_KEY_BYTES (1024/8)
-#define SHA_BIT_SIZE  (160)
-#define MAX_CRYPTO_KEY_LENGTH 24
-#define MAX_MAC_KEY_LENGTH 64
-#define UBSEC_CRYPTO_DEVICE_NAME ((unsigned char *)"/dev/ubscrypt")
-#define UBSEC_KEY_DEVICE_NAME ((unsigned char *)"/dev/ubskey")
-
-/* Math command types. */
-#define UBSEC_MATH_MODADD 0x0001
-#define UBSEC_MATH_MODSUB 0x0002
-#define UBSEC_MATH_MODMUL 0x0004
-#define UBSEC_MATH_MODEXP 0x0008
-#define UBSEC_MATH_MODREM 0x0010
-#define UBSEC_MATH_MODINV 0x0020
-
-typedef long ubsec_MathCommand_t;
-typedef long ubsec_RNGCommand_t;
-
-typedef struct ubsec_crypto_context_s {
-	unsigned int	flags;
-	unsigned char	crypto[MAX_CRYPTO_KEY_LENGTH];
-	unsigned char 	auth[MAX_MAC_KEY_LENGTH];
-} ubsec_crypto_context_t, *ubsec_crypto_context_p;
-
-/* 
- * Predeclare the function pointer types that we dynamically load from the DSO.
- */
-
-typedef int t_UBSEC_ubsec_bytes_to_bits(unsigned char *n, int bytes);
-
-typedef int t_UBSEC_ubsec_bits_to_bytes(int bits);
-
-typedef int t_UBSEC_ubsec_open(unsigned char *device);
-
-typedef int t_UBSEC_ubsec_close(int fd);
-
-typedef int t_UBSEC_diffie_hellman_generate_ioctl (int fd,
-	unsigned char *x, int *x_len, unsigned char *y, int *y_len, 
-	unsigned char *g, int g_len, unsigned char *m, int m_len,
-	unsigned char *userX, int userX_len, int random_bits);
-
-typedef int t_UBSEC_diffie_hellman_agree_ioctl (int fd,
-	unsigned char *x, int x_len, unsigned char *y, int y_len, 
-	unsigned char *m, int m_len, unsigned char *k, int *k_len);
-
-typedef int t_UBSEC_rsa_mod_exp_ioctl (int fd,
-	unsigned char *x, int x_len, unsigned char *m, int m_len,
-	unsigned char *e, int e_len, unsigned char *y, int *y_len);
-
-typedef int t_UBSEC_rsa_mod_exp_crt_ioctl (int fd,
-	unsigned char *x, int x_len, unsigned char *qinv, int qinv_len,
-	unsigned char *edq, int edq_len, unsigned char *q, int q_len,
-	unsigned char *edp, int edp_len, unsigned char *p, int p_len,
-	unsigned char *y, int *y_len);
-
-typedef int t_UBSEC_dsa_sign_ioctl (int fd,
-	int hash, unsigned char *data, int data_len, 
-	unsigned char *rndom, int random_len, 
-	unsigned char *p, int p_len, unsigned char *q, int q_len,
-	unsigned char *g, int g_len, unsigned char *key, int key_len,
-	unsigned char *r, int *r_len, unsigned char *s, int *s_len);
-
-typedef int t_UBSEC_dsa_verify_ioctl (int fd,
-	int hash, unsigned char *data, int data_len,
-	unsigned char *p, int p_len, unsigned char *q, int q_len,
-	unsigned char *g, int g_len, unsigned char *key, int key_len,
-	unsigned char *r, int r_len, unsigned char *s, int s_len,
-	unsigned char *v, int *v_len);
-
-typedef int t_UBSEC_math_accelerate_ioctl(int fd, ubsec_MathCommand_t command,
-	unsigned char *ModN, int *ModN_len, unsigned char *ExpE, int *ExpE_len, 
-	unsigned char *ParamA, int *ParamA_len, unsigned char *ParamB, int *ParamB_len,
-	unsigned char *Result, int *Result_len);
-
-typedef int t_UBSEC_rng_ioctl(int fd, ubsec_RNGCommand_t command,
-	unsigned char *Result, int *Result_len);
-
-typedef int t_UBSEC_max_key_len_ioctl(int fd, int *max_key_len);
diff --git a/crypto/openssl/crypto/engine/vendor_defns/hwcryptohook.h b/crypto/openssl/crypto/engine/vendor_defns/hwcryptohook.h
deleted file mode 100644
index 39224bc30f06..000000000000
--- a/crypto/openssl/crypto/engine/vendor_defns/hwcryptohook.h
+++ /dev/null
@@ -1,486 +0,0 @@
-/*
- * ModExp / RSA (with/without KM) plugin API
- *
- * The application will load a dynamic library which
- * exports entrypoint(s) defined in this file.
- *
- * This set of entrypoints provides only a multithreaded,
- * synchronous-within-each-thread, facility.
- *
- *
- * This file is Copyright 1998-2000 nCipher Corporation Limited.
- *
- * Redistribution and use in source and binary forms, with opr without
- * modification, are permitted provided that the following conditions
- * are met:
- *
- * 1. Redistributions of source code must retain the copyright notice,
- *    this list of conditions, and the following disclaimer.
- *
- * 2. Redistributions in binary form must reproduce the above
- *    copyright notice, this list of conditions, and the following
- *    disclaimer, in the documentation and/or other materials provided
- *    with the distribution
- *
- * IN NO EVENT SHALL NCIPHER CORPORATION LIMITED (`NCIPHER') AND/OR
- * ANY OTHER AUTHORS OR DISTRIBUTORS OF THIS FILE BE LIABLE for any
- * damages arising directly or indirectly from this file, its use or
- * this licence.  Without prejudice to the generality of the
- * foregoing: all liability shall be excluded for direct, indirect,
- * special, incidental, consequential or other damages or any loss of
- * profits, business, revenue goodwill or anticipated savings;
- * liability shall be excluded even if nCipher or anyone else has been
- * advised of the possibility of damage.  In any event, if the
- * exclusion of liability is not effective, the liability of nCipher
- * or any author or distributor shall be limited to the lesser of the
- * price paid and 1,000 pounds sterling. This licence only fails to
- * exclude or limit liability for death or personal injury arising out
- * of negligence, and only to the extent that such an exclusion or
- * limitation is not effective.
- *
- * NCIPHER AND THE AUTHORS AND DISTRIBUTORS SPECIFICALLY DISCLAIM ALL
- * AND ANY WARRANTIES (WHETHER EXPRESS OR IMPLIED), including, but not
- * limited to, any implied warranties of merchantability, fitness for
- * a particular purpose, satisfactory quality, and/or non-infringement
- * of any third party rights.
- *
- * US Government use: This software and documentation is Commercial
- * Computer Software and Computer Software Documentation, as defined in
- * sub-paragraphs (a)(1) and (a)(5) of DFAR 252.227-7014, "Rights in
- * Noncommercial Computer Software and Noncommercial Computer Software
- * Documentation."  Use, duplication or disclosure by the Government is
- * subject to the terms and conditions specified here.
- *
- * By using or distributing this file you will be accepting these
- * terms and conditions, including the limitation of liability and
- * lack of warranty.  If you do not wish to accept these terms and
- * conditions, DO NOT USE THE FILE.
- *
- *
- * The actual dynamically loadable plugin, and the library files for
- * static linking, which are also provided in some distributions, are
- * not covered by the licence described above.  You should have
- * received a separate licence with terms and conditions for these
- * library files; if you received the library files without a licence,
- * please contact nCipher.
- *
- *
- * $Id: hwcryptohook.h,v 1.3 2001/07/04 12:26:39 ben Exp $
- */
-
-#ifndef HWCRYPTOHOOK_H
-#define HWCRYPTOHOOK_H
-
-#include <sys/types.h>
-#include <stdio.h>
-
-#ifndef HWCRYPTOHOOK_DECLARE_APPTYPES
-#define HWCRYPTOHOOK_DECLARE_APPTYPES 1
-#endif
-
-#define HWCRYPTOHOOK_ERROR_FAILED   -1
-#define HWCRYPTOHOOK_ERROR_FALLBACK -2
-#define HWCRYPTOHOOK_ERROR_MPISIZE  -3
-
-#if HWCRYPTOHOOK_DECLARE_APPTYPES
-
-/* These structs are defined by the application and opaque to the
- * crypto plugin.  The application may define these as it sees fit.
- * Default declarations are provided here, but the application may
- *  #define HWCRYPTOHOOK_DECLARE_APPTYPES 0
- * to prevent these declarations, and instead provide its own
- * declarations of these types.  (Pointers to them must still be
- * ordinary pointers to structs or unions, or the resulting combined
- * program will have a type inconsistency.)
- */
-typedef struct HWCryptoHook_MutexValue HWCryptoHook_Mutex;
-typedef struct HWCryptoHook_CondVarValue HWCryptoHook_CondVar;
-typedef struct HWCryptoHook_PassphraseContextValue HWCryptoHook_PassphraseContext;
-typedef struct HWCryptoHook_CallerContextValue HWCryptoHook_CallerContext;
-
-#endif /* HWCRYPTOHOOK_DECLARE_APPTYPES */
-
-/* These next two structs are opaque to the application.  The crypto
- * plugin will return pointers to them; the caller simply manipulates
- * the pointers.
- */
-typedef struct HWCryptoHook_Context *HWCryptoHook_ContextHandle;
-typedef struct HWCryptoHook_RSAKey *HWCryptoHook_RSAKeyHandle;
-
-typedef struct {
-  char *buf;
-  size_t size;
-} HWCryptoHook_ErrMsgBuf;
-/* Used for error reporting.  When a HWCryptoHook function fails it
- * will return a sentinel value (0 for pointer-valued functions, or a
- * negative number, usually HWCRYPTOHOOK_ERROR_FAILED, for
- * integer-valued ones).  It will, if an ErrMsgBuf is passed, also put
- * an error message there.
- * 
- * size is the size of the buffer, and will not be modified.  If you
- * pass 0 for size you must pass 0 for buf, and nothing will be
- * recorded (just as if you passed 0 for the struct pointer).
- * Messages written to the buffer will always be null-terminated, even
- * when truncated to fit within size bytes.
- *
- * The contents of the buffer are not defined if there is no error.
- */
-
-typedef struct HWCryptoHook_MPIStruct {
-  unsigned char *buf;
-  size_t size;
-} HWCryptoHook_MPI;
-/* When one of these is returned, a pointer is passed to the function.
- * At call, size is the space available.  Afterwards it is updated to
- * be set to the actual length (which may be more than the space available,
- * if there was not enough room and the result was truncated).
- * buf (the pointer) is not updated.
- *
- * size is in bytes and may be zero at call or return, but must be a
- * multiple of the limb size.  Zero limbs at the MS end are not
- * permitted.
- */
-
-#define HWCryptoHook_InitFlags_FallbackModExp    0x0002UL
-#define HWCryptoHook_InitFlags_FallbackRSAImmed  0x0004UL
-/* Enable requesting fallback to software in case of problems with the
- * hardware support.  This indicates to the crypto provider that the
- * application is prepared to fall back to software operation if the
- * ModExp* or RSAImmed* functions return HWCRYPTOHOOK_ERROR_FALLBACK.
- * Without this flag those calls will never return
- * HWCRYPTOHOOK_ERROR_FALLBACK.  The flag will also cause the crypto
- * provider to avoid repeatedly attempting to contact dead hardware
- * within a short interval, if appropriate.
- */
-
-#define HWCryptoHook_InitFlags_SimpleForkCheck   0x0010UL
-/* Without _SimpleForkCheck the library is allowed to assume that the
- * application will not fork and call the library in the child(ren).
- *
- * When it is specified, this is allowed.  However, after a fork
- * neither parent nor child may unload any loaded keys or call
- * _Finish.  Instead, they should call exit (or die with a signal)
- * without calling _Finish.  After all the children have died the
- * parent may unload keys or call _Finish.
- *
- * This flag only has any effect on UN*X platforms.
- */
-
-typedef struct {
-  unsigned long flags;
-  void *logstream; /* usually a FILE*.  See below. */
-
-  size_t limbsize; /* bignum format - size of radix type, must be power of 2 */
-  int mslimbfirst; /* 0 or 1 */
-  int msbytefirst; /* 0 or 1; -1 = native */
-
-  /* All the callback functions should return 0 on success, or a
-   * nonzero integer (whose value will be visible in the error message
-   * put in the buffer passed to the call).
-   *
-   * If a callback is not available pass a null function pointer.
-   *
-   * The callbacks may not call down again into the crypto plugin.
-   */
-  
-  /* For thread-safety.  Set everything to 0 if you promise only to be
-   * singlethreaded.  maxsimultaneous is the number of calls to
-   * ModExp[Crt]/RSAImmed{Priv,Pub}/RSA.  If you don't know what to
-   * put there then say 0 and the hook library will use a default.
-   *
-   * maxmutexes is a small limit on the number of simultaneous mutexes
-   * which will be requested by the library.  If there is no small
-   * limit, set it to 0.  If the crypto plugin cannot create the
-   * advertised number of mutexes the calls to its functions may fail.
-   * If a low number of mutexes is advertised the plugin will try to
-   * do the best it can.  Making larger numbers of mutexes available
-   * may improve performance and parallelism by reducing contention
-   * over critical sections.  Unavailability of any mutexes, implying
-   * single-threaded operation, should be indicated by the setting
-   * mutex_init et al to 0.
-   */
-  int maxmutexes;
-  int maxsimultaneous;
-  size_t mutexsize;
-  int (*mutex_init)(HWCryptoHook_Mutex*, HWCryptoHook_CallerContext *cactx);
-  int (*mutex_acquire)(HWCryptoHook_Mutex*);
-  void (*mutex_release)(HWCryptoHook_Mutex*);
-  void (*mutex_destroy)(HWCryptoHook_Mutex*);
-
-  /* For greater efficiency, can use condition vars internally for
-   * synchronisation.  In this case maxsimultaneous is ignored, but
-   * the other mutex stuff must be available.  In singlethreaded
-   * programs, set everything to 0.
-   */
-  size_t condvarsize;
-  int (*condvar_init)(HWCryptoHook_CondVar*, HWCryptoHook_CallerContext *cactx);
-  int (*condvar_wait)(HWCryptoHook_CondVar*, HWCryptoHook_Mutex*);
-  void (*condvar_signal)(HWCryptoHook_CondVar*);
-  void (*condvar_broadcast)(HWCryptoHook_CondVar*);
-  void (*condvar_destroy)(HWCryptoHook_CondVar*);
-  
-  /* The semantics of acquiring and releasing mutexes and broadcasting
-   * and waiting on condition variables are expected to be those from
-   * POSIX threads (pthreads).  The mutexes may be (in pthread-speak)
-   * fast mutexes, recursive mutexes, or nonrecursive ones.
-   * 
-   * The _release/_signal/_broadcast and _destroy functions must
-   * always succeed when given a valid argument; if they are given an
-   * invalid argument then the program (crypto plugin + application)
-   * has an internal error, and they should abort the program.
-   */
-
-  int (*getpassphrase)(const char *prompt_info,
-                       int *len_io, char *buf,
-                       HWCryptoHook_PassphraseContext *ppctx,
-                       HWCryptoHook_CallerContext *cactx);
-  /* Passphrases and the prompt_info, if they contain high-bit-set
-   * characters, are UTF-8.  The prompt_info may be a null pointer if
-   * no prompt information is available (it should not be an empty
-   * string).  It will not contain text like `enter passphrase';
-   * instead it might say something like `Operator Card for John
-   * Smith' or `SmartCard in nFast Module #1, Slot #1'.
-   *
-   * buf points to a buffer in which to return the passphrase; on
-   * entry *len_io is the length of the buffer.  It should be updated
-   * by the callback.  The returned passphrase should not be
-   * null-terminated by the callback.
-   */
-  
-  int (*getphystoken)(const char *prompt_info,
-                      const char *wrong_info,
-                      HWCryptoHook_PassphraseContext *ppctx,
-                      HWCryptoHook_CallerContext *cactx);
-  /* Requests that the human user physically insert a different
-   * smartcard, DataKey, etc.  The plugin should check whether the
-   * currently inserted token(s) are appropriate, and if they are it
-   * should not make this call.
-   *
-   * prompt_info is as before.  wrong_info is a description of the
-   * currently inserted token(s) so that the user is told what
-   * something is.  wrong_info, like prompt_info, may be null, but
-   * should not be an empty string.  Its contents should be
-   * syntactically similar to that of prompt_info. 
-   */
-  
-  /* Note that a single LoadKey operation might cause several calls to
-   * getpassphrase and/or requestphystoken.  If requestphystoken is
-   * not provided (ie, a null pointer is passed) then the plugin may
-   * not support loading keys for which authorisation by several cards
-   * is required.  If getpassphrase is not provided then cards with
-   * passphrases may not be supported.
-   *
-   * getpassphrase and getphystoken do not need to check that the
-   * passphrase has been entered correctly or the correct token
-   * inserted; the crypto plugin will do that.  If this is not the
-   * case then the crypto plugin is responsible for calling these
-   * routines again as appropriate until the correct token(s) and
-   * passphrase(s) are supplied as required, or until any retry limits
-   * implemented by the crypto plugin are reached.
-   *
-   * In either case, the application must allow the user to say `no'
-   * or `cancel' to indicate that they do not know the passphrase or
-   * have the appropriate token; this should cause the callback to
-   * return nonzero indicating error.
-   */
-
-  void (*logmessage)(void *logstream, const char *message);
-  /* A log message will be generated at least every time something goes
-   * wrong and an ErrMsgBuf is filled in (or would be if one was
-   * provided).  Other diagnostic information may be written there too,
-   * including more detailed reasons for errors which are reported in an
-   * ErrMsgBuf.
-   *
-   * When a log message is generated, this callback is called.  It
-   * should write a message to the relevant logging arrangements.
-   *
-   * The message string passed will be null-terminated and may be of arbitrary
-   * length.  It will not be prefixed by the time and date, nor by the
-   * name of the library that is generating it - if this is required,
-   * the logmessage callback must do it.  The message will not have a
-   * trailing newline (though it may contain internal newlines).
-   *
-   * If a null pointer is passed for logmessage a default function is
-   * used.  The default function treats logstream as a FILE* which has
-   * been converted to a void*.  If logstream is 0 it does nothing.
-   * Otherwise it prepends the date and time and library name and
-   * writes the message to logstream.  Each line will be prefixed by a
-   * descriptive string containing the date, time and identity of the
-   * crypto plugin.  Errors on the logstream are not reported
-   * anywhere, and the default function doesn't flush the stream, so
-   * the application must set the buffering how it wants it.
-   *
-   * The crypto plugin may also provide a facility to have copies of
-   * log messages sent elsewhere, and or for adjusting the verbosity
-   * of the log messages; any such facilities will be configured by
-   * external means.
-   */
-
-} HWCryptoHook_InitInfo;
-
-typedef
-HWCryptoHook_ContextHandle HWCryptoHook_Init_t(const HWCryptoHook_InitInfo *initinfo,
-                                               size_t initinfosize,
-                                               const HWCryptoHook_ErrMsgBuf *errors,
-                                               HWCryptoHook_CallerContext *cactx);
-extern HWCryptoHook_Init_t HWCryptoHook_Init;
-
-/* Caller should set initinfosize to the size of the HWCryptoHook struct,
- * so it can be extended later.
- *
- * On success, a message for display or logging by the server,
- * including the name and version number of the plugin, will be filled
- * in into *errors; on failure *errors is used for error handling, as
- * usual.
- */
-
-/* All these functions return 0 on success, HWCRYPTOHOOK_ERROR_FAILED
- * on most failures.  HWCRYPTOHOOK_ERROR_MPISIZE means at least one of
- * the output MPI buffer(s) was too small; the sizes of all have been
- * set to the desired size (and for those where the buffer was large
- * enough, the value may have been copied in), and no error message
- * has been recorded.
- *
- * You may pass 0 for the errors struct.  In any case, unless you set
- * _NoStderr at init time then messages may be reported to stderr.
- */
-
-/* The RSAImmed* functions (and key managed RSA) only work with
- * modules which have an RSA patent licence - currently that means KM
- * units; the ModExp* ones work with all modules, so you need a patent
- * licence in the software in the US.  They are otherwise identical.
- */
-
-typedef
-void HWCryptoHook_Finish_t(HWCryptoHook_ContextHandle hwctx);
-extern HWCryptoHook_Finish_t HWCryptoHook_Finish;
-/* You must not have any calls going or keys loaded when you call this. */
-
-typedef
-int HWCryptoHook_RandomBytes_t(HWCryptoHook_ContextHandle hwctx,
-                               unsigned char *buf, size_t len,
-                               const HWCryptoHook_ErrMsgBuf *errors);
-extern HWCryptoHook_RandomBytes_t HWCryptoHook_RandomBytes;
-
-typedef
-int HWCryptoHook_ModExp_t(HWCryptoHook_ContextHandle hwctx,
-                          HWCryptoHook_MPI a,
-                          HWCryptoHook_MPI p,
-                          HWCryptoHook_MPI n,
-                          HWCryptoHook_MPI *r,
-                          const HWCryptoHook_ErrMsgBuf *errors);
-extern HWCryptoHook_ModExp_t HWCryptoHook_ModExp;
-
-typedef
-int HWCryptoHook_RSAImmedPub_t(HWCryptoHook_ContextHandle hwctx,
-                               HWCryptoHook_MPI m,
-                               HWCryptoHook_MPI e,
-                               HWCryptoHook_MPI n,
-                               HWCryptoHook_MPI *r,
-                               const HWCryptoHook_ErrMsgBuf *errors);
-extern HWCryptoHook_RSAImmedPub_t HWCryptoHook_RSAImmedPub;
-
-typedef
-int HWCryptoHook_ModExpCRT_t(HWCryptoHook_ContextHandle hwctx,
-                             HWCryptoHook_MPI a,
-                             HWCryptoHook_MPI p,
-                             HWCryptoHook_MPI q,
-                             HWCryptoHook_MPI dmp1,
-                             HWCryptoHook_MPI dmq1,
-                             HWCryptoHook_MPI iqmp,
-                             HWCryptoHook_MPI *r,
-                             const HWCryptoHook_ErrMsgBuf *errors);
-extern HWCryptoHook_ModExpCRT_t HWCryptoHook_ModExpCRT;
-
-typedef
-int HWCryptoHook_RSAImmedPriv_t(HWCryptoHook_ContextHandle hwctx,
-                                HWCryptoHook_MPI m,
-                                HWCryptoHook_MPI p,
-                                HWCryptoHook_MPI q,
-                                HWCryptoHook_MPI dmp1,
-                                HWCryptoHook_MPI dmq1,
-                                HWCryptoHook_MPI iqmp,
-                                HWCryptoHook_MPI *r,
-                                const HWCryptoHook_ErrMsgBuf *errors);
-extern HWCryptoHook_RSAImmedPriv_t HWCryptoHook_RSAImmedPriv;
-
-/* The RSAImmed* and ModExp* functions may return E_FAILED or
- * E_FALLBACK for failure.
- *
- * E_FAILED means the failure is permanent and definite and there
- *    should be no attempt to fall back to software.  (Eg, for some
- *    applications, which support only the acceleration-only
- *    functions, the `key material' may actually be an encoded key
- *    identifier, and doing the operation in software would give wrong
- *    answers.)
- *
- * E_FALLBACK means that doing the computation in software would seem
- *    reasonable.  If an application pays attention to this and is
- *    able to fall back, it should also set the Fallback init flags.
- */
-
-typedef
-int HWCryptoHook_RSALoadKey_t(HWCryptoHook_ContextHandle hwctx,
-                              const char *key_ident,
-                              HWCryptoHook_RSAKeyHandle *keyhandle_r,
-                              const HWCryptoHook_ErrMsgBuf *errors,
-                              HWCryptoHook_PassphraseContext *ppctx);
-extern HWCryptoHook_RSALoadKey_t HWCryptoHook_RSALoadKey;
-/* The key_ident is a null-terminated string configured by the
- * user via the application's usual configuration mechanisms.
- * It is provided to the user by the crypto provider's key management
- * system.  The user must be able to enter at least any string of between
- * 1 and 1023 characters inclusive, consisting of printable 7-bit
- * ASCII characters.  The provider should avoid using
- * any characters except alphanumerics and the punctuation
- * characters  _ - + . / @ ~  (the user is expected to be able
- * to enter these without quoting).  The string may be case-sensitive.
- * The application may allow the user to enter other NULL-terminated strings,
- * and the provider must cope (returning an error if the string is not
- * valid).
- *
- * If the key does not exist, no error is recorded and 0 is returned;
- * keyhandle_r will be set to 0 instead of to a key handle.
- */
-
-typedef
-int HWCryptoHook_RSAGetPublicKey_t(HWCryptoHook_RSAKeyHandle k,
-                                   HWCryptoHook_MPI *n,
-                                   HWCryptoHook_MPI *e,
-                                   const HWCryptoHook_ErrMsgBuf *errors);
-extern HWCryptoHook_RSAGetPublicKey_t HWCryptoHook_RSAGetPublicKey;
-/* The crypto plugin will not store certificates.
- *
- * Although this function for acquiring the public key value is
- * provided, it is not the purpose of this API to deal fully with the
- * handling of the public key.
- *
- * It is expected that the crypto supplier's key generation program
- * will provide general facilities for producing X.509
- * self-certificates and certificate requests in PEM format.  These
- * will be given to the user so that they can configure them in the
- * application, send them to CAs, or whatever.
- *
- * In case this kind of certificate handling is not appropriate, the
- * crypto supplier's key generation program should be able to be
- * configured not to generate such a self-certificate or certificate
- * request.  Then the application will need to do all of this, and
- * will need to store and handle the public key and certificates
- * itself.
- */
-
-typedef
-int HWCryptoHook_RSAUnloadKey_t(HWCryptoHook_RSAKeyHandle k,
-                                const HWCryptoHook_ErrMsgBuf *errors);
-extern HWCryptoHook_RSAUnloadKey_t HWCryptoHook_RSAUnloadKey;
-/* Might fail due to locking problems, or other serious internal problems. */
-
-typedef
-int HWCryptoHook_RSA_t(HWCryptoHook_MPI m,
-                       HWCryptoHook_RSAKeyHandle k,
-                       HWCryptoHook_MPI *r,
-                       const HWCryptoHook_ErrMsgBuf *errors);
-extern HWCryptoHook_RSA_t HWCryptoHook_RSA;
-/* RSA private key operation (sign or decrypt) - raw, unpadded. */
-
-#endif /*HWCRYPTOHOOK_H*/
diff --git a/crypto/openssl/crypto/engine/vendor_defns/sureware.h b/crypto/openssl/crypto/engine/vendor_defns/sureware.h
deleted file mode 100644
index 1d3789219df9..000000000000
--- a/crypto/openssl/crypto/engine/vendor_defns/sureware.h
+++ /dev/null
@@ -1,239 +0,0 @@
-/*
-* Written by Corinne Dive-Reclus(cdive@baltimore.com)
-*
-* Copyright@2001 Baltimore Technologies Ltd.
-*																								*	
-*		THIS FILE IS PROVIDED BY BALTIMORE TECHNOLOGIES ``AS IS'' AND																			*
-*		ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE					* 
-*		IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE				*
-*		ARE DISCLAIMED.  IN NO EVENT SHALL BALTIMORE TECHNOLOGIES BE LIABLE						*
-*		FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL				*
-*		DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS					*
-*		OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)					*
-*		HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT				*
-*		LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY				*
-*		OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF					*
-*		SUCH DAMAGE.																			*
-*
-* 
-*/
-#ifdef WIN32
-#define SW_EXPORT	__declspec ( dllexport )
-#else
-#define SW_EXPORT
-#endif
-
-/*
-*	List of exposed SureWare errors
-*/
-#define SUREWAREHOOK_ERROR_FAILED		-1
-#define SUREWAREHOOK_ERROR_FALLBACK		-2
-#define SUREWAREHOOK_ERROR_UNIT_FAILURE -3
-#define SUREWAREHOOK_ERROR_DATA_SIZE -4
-#define SUREWAREHOOK_ERROR_INVALID_PAD -5
-/*
-* -----------------WARNING-----------------------------------
-* In all the following functions:
-* msg is a string with at least 24 bytes free.
-* A 24 bytes string will be concatenated to the existing content of msg. 
-*/
-/*
-*	SureWare Initialisation function
-*	in param threadsafe, if !=0, thread safe enabled
-*	return SureWareHOOK_ERROR_UNIT_FAILURE if failure, 1 if success
-*/
-typedef int SureWareHook_Init_t(char*const msg,int threadsafe);
-extern SW_EXPORT SureWareHook_Init_t SureWareHook_Init;
-/*
-*	SureWare Finish function
-*/
-typedef void SureWareHook_Finish_t();
-extern SW_EXPORT SureWareHook_Finish_t SureWareHook_Finish;
-/*
-*	 PRE_CONDITION:
-*		DO NOT CALL ANY OF THE FOLLOWING FUNCTIONS IN CASE OF INIT FAILURE
-*/
-/*
-*	SureWare RAND Bytes function
-*	In case of failure, the content of buf is unpredictable.
-*	return 1 if success
-*			SureWareHOOK_ERROR_FALLBACK if function not available in hardware
-*			SureWareHOOK_ERROR_FAILED if error while processing
-*			SureWareHOOK_ERROR_UNIT_FAILURE if hardware failure
-*			SUREWAREHOOK_ERROR_DATA_SIZE wrong size for buf
-*
-*	in/out param buf : a num bytes long buffer where random bytes will be put
-*	in param num : the number of bytes into buf
-*/
-typedef int SureWareHook_Rand_Bytes_t(char*const msg,unsigned char *buf, int num);
-extern SW_EXPORT SureWareHook_Rand_Bytes_t SureWareHook_Rand_Bytes;
-
-/*
-*	SureWare RAND Seed function
-*	Adds some seed to the Hardware Random Number Generator
-*	return 1 if success
-*			SureWareHOOK_ERROR_FALLBACK if function not available in hardware
-*			SureWareHOOK_ERROR_FAILED if error while processing
-*			SureWareHOOK_ERROR_UNIT_FAILURE if hardware failure
-*			SUREWAREHOOK_ERROR_DATA_SIZE wrong size for buf
-*
-*	in param buf : the seed to add into the HRNG
-*	in param num : the number of bytes into buf
-*/
-typedef int SureWareHook_Rand_Seed_t(char*const msg,const void *buf, int num);
-extern SW_EXPORT SureWareHook_Rand_Seed_t SureWareHook_Rand_Seed;
-
-/*
-*	SureWare Load Private Key function
-*	return 1 if success
-*			SureWareHOOK_ERROR_FAILED if error while processing
-*	No hardware is contact for this function.
-*
-*	in param key_id :the name of the private protected key file without the extension
-						".sws"
-*	out param hptr : a pointer to a buffer allocated by SureWare_Hook
-*	out param num: the effective key length in bytes
-*	out param keytype: 1 if RSA 2 if DSA
-*/
-typedef int SureWareHook_Load_Privkey_t(char*const msg,const char *key_id,char **hptr,unsigned long *num,char *keytype);
-extern SW_EXPORT SureWareHook_Load_Privkey_t SureWareHook_Load_Privkey;
-
-/*
-*	SureWare Info Public Key function
-*	return 1 if success
-*			SureWareHOOK_ERROR_FAILED if error while processing
-*	No hardware is contact for this function.
-*
-*	in param key_id :the name of the private protected key file without the extension
-						".swp"
-*	out param hptr : a pointer to a buffer allocated by SureWare_Hook
-*	out param num: the effective key length in bytes
-*	out param keytype: 1 if RSA 2 if DSA
-*/
-typedef int SureWareHook_Info_Pubkey_t(char*const msg,const char *key_id,unsigned long *num,
-										char *keytype);
-extern SW_EXPORT SureWareHook_Info_Pubkey_t SureWareHook_Info_Pubkey;
-
-/*
-*	SureWare Load Public Key function
-*	return 1 if success
-*			SureWareHOOK_ERROR_FAILED if error while processing
-*	No hardware is contact for this function.
-*
-*	in param key_id :the name of the public protected key file without the extension
-						".swp"
-*	in param num : the bytes size of n and e
-*	out param n: where to write modulus in bn format
-*	out param e: where to write exponent in bn format
-*/
-typedef int SureWareHook_Load_Rsa_Pubkey_t(char*const msg,const char *key_id,unsigned long num,
-										unsigned long *n, unsigned long *e);
-extern SW_EXPORT SureWareHook_Load_Rsa_Pubkey_t SureWareHook_Load_Rsa_Pubkey;
-
-/*
-*	SureWare Load DSA Public Key function
-*	return 1 if success
-*			SureWareHOOK_ERROR_FAILED if error while processing
-*	No hardware is contact for this function.
-*
-*	in param key_id :the name of the public protected key file without the extension
-						".swp"
-*	in param num : the bytes size of n and e
-*	out param pub: where to write pub key in bn format
-*	out param p: where to write prime in bn format
-*	out param q: where to write sunprime (length 20 bytes) in bn format
-*	out param g: where to write base in bn format
-*/
-typedef int SureWareHook_Load_Dsa_Pubkey_t(char*const msg,const char *key_id,unsigned long num,
-										unsigned long *pub, unsigned long *p,unsigned long*q,
-										unsigned long *g);
-extern SW_EXPORT SureWareHook_Load_Dsa_Pubkey_t SureWareHook_Load_Dsa_Pubkey;
-
-/*
-*	SureWare Free function
-*	Destroy the key into the hardware if destroy==1
-*/
-typedef void SureWareHook_Free_t(char *p,int destroy);
-extern SW_EXPORT SureWareHook_Free_t SureWareHook_Free;
-
-#define SUREWARE_PKCS1_PAD 1
-#define SUREWARE_ISO9796_PAD 2
-#define SUREWARE_NO_PAD 0
-/*
-* SureWare RSA Private Decryption
-* return 1 if success
-*			SureWareHOOK_ERROR_FAILED if error while processing
-*			SureWareHOOK_ERROR_UNIT_FAILURE if hardware failure
-*			SUREWAREHOOK_ERROR_DATA_SIZE wrong size for buf
-*
-*	in param flen : byte size of from and to
-*	in param from : encrypted data buffer, should be a not-null valid pointer
-*	out param tlen: byte size of decrypted data, if error, unexpected value
-*	out param to : decrypted data buffer, should be a not-null valid pointer
-*   in param prsa: a protected key pointer, should be a not-null valid pointer
-*   int padding: padding id as follow
-*					SUREWARE_PKCS1_PAD
-*					SUREWARE_NO_PAD
-*
-*/
-typedef int SureWareHook_Rsa_Priv_Dec_t(char*const msg,int flen,unsigned char *from,
-										int *tlen,unsigned char *to,
-										char *prsa,int padding);
-extern SW_EXPORT SureWareHook_Rsa_Priv_Dec_t SureWareHook_Rsa_Priv_Dec;
-/*
-* SureWare RSA Signature
-* return 1 if success
-*			SureWareHOOK_ERROR_FAILED if error while processing
-*			SureWareHOOK_ERROR_UNIT_FAILURE if hardware failure
-*			SUREWAREHOOK_ERROR_DATA_SIZE wrong size for buf
-*
-*	in param flen : byte size of from and to
-*	in param from : encrypted data buffer, should be a not-null valid pointer
-*	out param tlen: byte size of decrypted data, if error, unexpected value
-*	out param to : decrypted data buffer, should be a not-null valid pointer
-*   in param prsa: a protected key pointer, should be a not-null valid pointer
-*   int padding: padding id as follow
-*					SUREWARE_PKCS1_PAD
-*					SUREWARE_ISO9796_PAD
-*
-*/
-typedef int SureWareHook_Rsa_Sign_t(char*const msg,int flen,unsigned char *from,
-										int *tlen,unsigned char *to,
-										char *prsa,int padding);
-extern SW_EXPORT SureWareHook_Rsa_Sign_t SureWareHook_Rsa_Sign;
-/*
-* SureWare DSA Signature
-* return 1 if success
-*			SureWareHOOK_ERROR_FAILED if error while processing
-*			SureWareHOOK_ERROR_UNIT_FAILURE if hardware failure
-*			SUREWAREHOOK_ERROR_DATA_SIZE wrong size for buf
-*
-*	in param flen : byte size of from and to
-*	in param from : encrypted data buffer, should be a not-null valid pointer
-*	out param to : decrypted data buffer, should be a 40bytes valid pointer
-*   in param pdsa: a protected key pointer, should be a not-null valid pointer
-*
-*/
-typedef int SureWareHook_Dsa_Sign_t(char*const msg,int flen,const unsigned char *from,
-										unsigned long *r,unsigned long *s,char *pdsa);
-extern SW_EXPORT SureWareHook_Dsa_Sign_t SureWareHook_Dsa_Sign;
-
-
-/*
-* SureWare Mod Exp
-* return 1 if success
-*			SureWareHOOK_ERROR_FAILED if error while processing
-*			SureWareHOOK_ERROR_UNIT_FAILURE if hardware failure
-*			SUREWAREHOOK_ERROR_DATA_SIZE wrong size for buf
-*
-*	mod and res are mlen bytes long.
-*	exp is elen bytes long
-*	data is dlen bytes long
-*	mlen,elen and dlen are all multiple of sizeof(unsigned long)
-*/
-typedef int SureWareHook_Mod_Exp_t(char*const msg,int mlen,const unsigned long *mod,
-									int elen,const unsigned long *exp,
-									int dlen,unsigned long *data,
-									unsigned long *res);
-extern SW_EXPORT SureWareHook_Mod_Exp_t SureWareHook_Mod_Exp;
-
diff --git a/crypto/openssl/crypto/err/Makefile b/crypto/openssl/crypto/err/Makefile
deleted file mode 100644
index 23e38409c8af..000000000000
--- a/crypto/openssl/crypto/err/Makefile
+++ /dev/null
@@ -1,109 +0,0 @@
-#
-# OpenSSL/crypto/err/Makefile
-#
-
-DIR=	err
-TOP=	../..
-CC=	cc
-INCLUDES= -I.. -I$(TOP) -I../../include
-CFLAG=-g
-MAKEFILE=	Makefile
-AR=		ar r
-
-CFLAGS= $(INCLUDES) $(CFLAG)
-
-GENERAL=Makefile
-TEST=
-APPS=
-
-LIB=$(TOP)/libcrypto.a
-LIBSRC=err.c err_all.c err_prn.c
-LIBOBJ=err.o err_all.o err_prn.o
-
-SRC= $(LIBSRC)
-
-EXHEADER= err.h
-HEADER=	$(EXHEADER)
-
-ALL=    $(GENERAL) $(SRC) $(HEADER)
-
-top:
-	(cd ../..; $(MAKE) DIRS=crypto SDIRS=$(DIR) sub_all)
-
-all:	lib
-
-lib:	$(LIBOBJ)
-	$(AR) $(LIB) $(LIBOBJ)
-	$(RANLIB) $(LIB) || echo Never mind.
-	@touch lib
-
-files:
-	$(PERL) $(TOP)/util/files.pl Makefile >> $(TOP)/MINFO
-
-links:
-	@$(PERL) $(TOP)/util/mklink.pl ../../include/openssl $(EXHEADER)
-	@$(PERL) $(TOP)/util/mklink.pl ../../test $(TEST)
-	@$(PERL) $(TOP)/util/mklink.pl ../../apps $(APPS)
-
-install:
-	@[ -n "$(INSTALLTOP)" ] # should be set by top Makefile...
-	@headerlist="$(EXHEADER)"; for i in $$headerlist ; \
-	do  \
-	(cp $$i $(INSTALL_PREFIX)$(INSTALLTOP)/include/openssl/$$i; \
-	chmod 644 $(INSTALL_PREFIX)$(INSTALLTOP)/include/openssl/$$i ); \
-	done;
-
-tags:
-	ctags $(SRC)
-
-tests:
-
-lint:
-	lint -DLINT $(INCLUDES) $(SRC)>fluff
-
-depend:
-	@[ -n "$(MAKEDEPEND)" ] # should be set by upper Makefile...
-	$(MAKEDEPEND) -- $(CFLAG) $(INCLUDES) $(DEPFLAG) -- $(PROGS) $(LIBSRC)
-
-dclean:
-	$(PERL) -pe 'if (/^# DO NOT DELETE THIS LINE/) {print; exit(0);}' $(MAKEFILE) >Makefile.new
-	mv -f Makefile.new $(MAKEFILE)
-
-clean:
-	rm -f *.o *.obj lib tags core .pure .nfs* *.old *.bak fluff
-
-# DO NOT DELETE THIS LINE -- make depend depends on it.
-
-err.o: ../../e_os.h ../../include/openssl/bio.h ../../include/openssl/buffer.h
-err.o: ../../include/openssl/crypto.h ../../include/openssl/e_os2.h
-err.o: ../../include/openssl/err.h ../../include/openssl/lhash.h
-err.o: ../../include/openssl/opensslconf.h ../../include/openssl/opensslv.h
-err.o: ../../include/openssl/ossl_typ.h ../../include/openssl/safestack.h
-err.o: ../../include/openssl/stack.h ../../include/openssl/symhacks.h
-err.o: ../cryptlib.h err.c
-err_all.o: ../../include/openssl/asn1.h ../../include/openssl/bio.h
-err_all.o: ../../include/openssl/bn.h ../../include/openssl/buffer.h
-err_all.o: ../../include/openssl/conf.h ../../include/openssl/crypto.h
-err_all.o: ../../include/openssl/dh.h ../../include/openssl/dsa.h
-err_all.o: ../../include/openssl/dso.h ../../include/openssl/e_os2.h
-err_all.o: ../../include/openssl/ec.h ../../include/openssl/ecdh.h
-err_all.o: ../../include/openssl/ecdsa.h ../../include/openssl/engine.h
-err_all.o: ../../include/openssl/err.h ../../include/openssl/evp.h
-err_all.o: ../../include/openssl/lhash.h ../../include/openssl/obj_mac.h
-err_all.o: ../../include/openssl/objects.h ../../include/openssl/ocsp.h
-err_all.o: ../../include/openssl/opensslconf.h ../../include/openssl/opensslv.h
-err_all.o: ../../include/openssl/ossl_typ.h ../../include/openssl/pem2.h
-err_all.o: ../../include/openssl/pkcs12.h ../../include/openssl/pkcs7.h
-err_all.o: ../../include/openssl/rand.h ../../include/openssl/rsa.h
-err_all.o: ../../include/openssl/safestack.h ../../include/openssl/sha.h
-err_all.o: ../../include/openssl/stack.h ../../include/openssl/symhacks.h
-err_all.o: ../../include/openssl/ui.h ../../include/openssl/x509.h
-err_all.o: ../../include/openssl/x509_vfy.h ../../include/openssl/x509v3.h
-err_all.o: err_all.c
-err_prn.o: ../../e_os.h ../../include/openssl/bio.h
-err_prn.o: ../../include/openssl/buffer.h ../../include/openssl/crypto.h
-err_prn.o: ../../include/openssl/e_os2.h ../../include/openssl/err.h
-err_prn.o: ../../include/openssl/lhash.h ../../include/openssl/opensslconf.h
-err_prn.o: ../../include/openssl/opensslv.h ../../include/openssl/ossl_typ.h
-err_prn.o: ../../include/openssl/safestack.h ../../include/openssl/stack.h
-err_prn.o: ../../include/openssl/symhacks.h ../cryptlib.h err_prn.c
diff --git a/crypto/openssl/crypto/err/err.c b/crypto/openssl/crypto/err/err.c
deleted file mode 100644
index 96bd255e50e8..000000000000
--- a/crypto/openssl/crypto/err/err.c
+++ /dev/null
@@ -1,1128 +0,0 @@
-/* crypto/err/err.c */
-/* Copyright (C) 1995-1998 Eric Young (eay@cryptsoft.com)
- * All rights reserved.
- *
- * This package is an SSL implementation written
- * by Eric Young (eay@cryptsoft.com).
- * The implementation was written so as to conform with Netscapes SSL.
- * 
- * This library is free for commercial and non-commercial use as long as
- * the following conditions are aheared to.  The following conditions
- * apply to all code found in this distribution, be it the RC4, RSA,
- * lhash, DES, etc., code; not just the SSL code.  The SSL documentation
- * included with this distribution is covered by the same copyright terms
- * except that the holder is Tim Hudson (tjh@cryptsoft.com).
- * 
- * Copyright remains Eric Young's, and as such any Copyright notices in
- * the code are not to be removed.
- * If this package is used in a product, Eric Young should be given attribution
- * as the author of the parts of the library used.
- * This can be in the form of a textual message at program startup or
- * in documentation (online or textual) provided with the package.
- * 
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions
- * are met:
- * 1. Redistributions of source code must retain the copyright
- *    notice, this list of conditions and the following disclaimer.
- * 2. Redistributions in binary form must reproduce the above copyright
- *    notice, this list of conditions and the following disclaimer in the
- *    documentation and/or other materials provided with the distribution.
- * 3. All advertising materials mentioning features or use of this software
- *    must display the following acknowledgement:
- *    "This product includes cryptographic software written by
- *     Eric Young (eay@cryptsoft.com)"
- *    The word 'cryptographic' can be left out if the rouines from the library
- *    being used are not cryptographic related :-).
- * 4. If you include any Windows specific code (or a derivative thereof) from 
- *    the apps directory (application code) you must include an acknowledgement:
- *    "This product includes software written by Tim Hudson (tjh@cryptsoft.com)"
- * 
- * THIS SOFTWARE IS PROVIDED BY ERIC YOUNG ``AS IS'' AND
- * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
- * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
- * ARE DISCLAIMED.  IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE
- * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
- * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
- * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
- * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
- * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
- * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
- * SUCH DAMAGE.
- * 
- * The licence and distribution terms for any publically available version or
- * derivative of this code cannot be changed.  i.e. this code cannot simply be
- * copied and put under another distribution licence
- * [including the GNU Public Licence.]
- */
-/* ====================================================================
- * Copyright (c) 1998-2001 The OpenSSL Project.  All rights reserved.
- *
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions
- * are met:
- *
- * 1. Redistributions of source code must retain the above copyright
- *    notice, this list of conditions and the following disclaimer. 
- *
- * 2. Redistributions in binary form must reproduce the above copyright
- *    notice, this list of conditions and the following disclaimer in
- *    the documentation and/or other materials provided with the
- *    distribution.
- *
- * 3. All advertising materials mentioning features or use of this
- *    software must display the following acknowledgment:
- *    "This product includes software developed by the OpenSSL Project
- *    for use in the OpenSSL Toolkit. (http://www.openssl.org/)"
- *
- * 4. The names "OpenSSL Toolkit" and "OpenSSL Project" must not be used to
- *    endorse or promote products derived from this software without
- *    prior written permission. For written permission, please contact
- *    openssl-core@openssl.org.
- *
- * 5. Products derived from this software may not be called "OpenSSL"
- *    nor may "OpenSSL" appear in their names without prior written
- *    permission of the OpenSSL Project.
- *
- * 6. Redistributions of any form whatsoever must retain the following
- *    acknowledgment:
- *    "This product includes software developed by the OpenSSL Project
- *    for use in the OpenSSL Toolkit (http://www.openssl.org/)"
- *
- * THIS SOFTWARE IS PROVIDED BY THE OpenSSL PROJECT ``AS IS'' AND ANY
- * EXPRESSED OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
- * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR
- * PURPOSE ARE DISCLAIMED.  IN NO EVENT SHALL THE OpenSSL PROJECT OR
- * ITS CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
- * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
- * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
- * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
- * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
- * STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
- * ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED
- * OF THE POSSIBILITY OF SUCH DAMAGE.
- * ====================================================================
- *
- * This product includes cryptographic software written by Eric Young
- * (eay@cryptsoft.com).  This product includes software written by Tim
- * Hudson (tjh@cryptsoft.com).
- *
- */
-
-#include <stdio.h>
-#include <stdarg.h>
-#include <string.h>
-#include "cryptlib.h"
-#include <openssl/lhash.h>
-#include <openssl/crypto.h>
-#include <openssl/buffer.h>
-#include <openssl/bio.h>
-#include <openssl/err.h>
-
-static void err_load_strings(int lib, ERR_STRING_DATA *str);
-
-static void ERR_STATE_free(ERR_STATE *s);
-#ifndef OPENSSL_NO_ERR
-static ERR_STRING_DATA ERR_str_libraries[]=
-	{
-{ERR_PACK(ERR_LIB_NONE,0,0)		,"unknown library"},
-{ERR_PACK(ERR_LIB_SYS,0,0)		,"system library"},
-{ERR_PACK(ERR_LIB_BN,0,0)		,"bignum routines"},
-{ERR_PACK(ERR_LIB_RSA,0,0)		,"rsa routines"},
-{ERR_PACK(ERR_LIB_DH,0,0)		,"Diffie-Hellman routines"},
-{ERR_PACK(ERR_LIB_EVP,0,0)		,"digital envelope routines"},
-{ERR_PACK(ERR_LIB_BUF,0,0)		,"memory buffer routines"},
-{ERR_PACK(ERR_LIB_OBJ,0,0)		,"object identifier routines"},
-{ERR_PACK(ERR_LIB_PEM,0,0)		,"PEM routines"},
-{ERR_PACK(ERR_LIB_DSA,0,0)		,"dsa routines"},
-{ERR_PACK(ERR_LIB_X509,0,0)		,"x509 certificate routines"},
-{ERR_PACK(ERR_LIB_ASN1,0,0)		,"asn1 encoding routines"},
-{ERR_PACK(ERR_LIB_CONF,0,0)		,"configuration file routines"},
-{ERR_PACK(ERR_LIB_CRYPTO,0,0)		,"common libcrypto routines"},
-{ERR_PACK(ERR_LIB_EC,0,0)		,"elliptic curve routines"},
-{ERR_PACK(ERR_LIB_SSL,0,0)		,"SSL routines"},
-{ERR_PACK(ERR_LIB_BIO,0,0)		,"BIO routines"},
-{ERR_PACK(ERR_LIB_PKCS7,0,0)		,"PKCS7 routines"},
-{ERR_PACK(ERR_LIB_X509V3,0,0)		,"X509 V3 routines"},
-{ERR_PACK(ERR_LIB_PKCS12,0,0)		,"PKCS12 routines"},
-{ERR_PACK(ERR_LIB_RAND,0,0)		,"random number generator"},
-{ERR_PACK(ERR_LIB_DSO,0,0)		,"DSO support routines"},
-{ERR_PACK(ERR_LIB_ENGINE,0,0)		,"engine routines"},
-{ERR_PACK(ERR_LIB_OCSP,0,0)		,"OCSP routines"},
-{0,NULL},
-	};
-
-static ERR_STRING_DATA ERR_str_functs[]=
-	{
-	{ERR_PACK(0,SYS_F_FOPEN,0),     	"fopen"},
-	{ERR_PACK(0,SYS_F_CONNECT,0),		"connect"},
-	{ERR_PACK(0,SYS_F_GETSERVBYNAME,0),	"getservbyname"},
-	{ERR_PACK(0,SYS_F_SOCKET,0),		"socket"}, 
-	{ERR_PACK(0,SYS_F_IOCTLSOCKET,0),	"ioctlsocket"},
-	{ERR_PACK(0,SYS_F_BIND,0),		"bind"},
-	{ERR_PACK(0,SYS_F_LISTEN,0),		"listen"},
-	{ERR_PACK(0,SYS_F_ACCEPT,0),		"accept"},
-#ifdef OPENSSL_SYS_WINDOWS
-	{ERR_PACK(0,SYS_F_WSASTARTUP,0),	"WSAstartup"},
-#endif
-	{ERR_PACK(0,SYS_F_OPENDIR,0),		"opendir"},
-	{ERR_PACK(0,SYS_F_FREAD,0),		"fread"},
-	{0,NULL},
-	};
-
-static ERR_STRING_DATA ERR_str_reasons[]=
-	{
-{ERR_R_SYS_LIB				,"system lib"},
-{ERR_R_BN_LIB				,"BN lib"},
-{ERR_R_RSA_LIB				,"RSA lib"},
-{ERR_R_DH_LIB				,"DH lib"},
-{ERR_R_EVP_LIB				,"EVP lib"},
-{ERR_R_BUF_LIB				,"BUF lib"},
-{ERR_R_OBJ_LIB				,"OBJ lib"},
-{ERR_R_PEM_LIB				,"PEM lib"},
-{ERR_R_DSA_LIB				,"DSA lib"},
-{ERR_R_X509_LIB				,"X509 lib"},
-{ERR_R_ASN1_LIB				,"ASN1 lib"},
-{ERR_R_CONF_LIB				,"CONF lib"},
-{ERR_R_CRYPTO_LIB			,"CRYPTO lib"},
-{ERR_R_EC_LIB				,"EC lib"},
-{ERR_R_SSL_LIB				,"SSL lib"},
-{ERR_R_BIO_LIB				,"BIO lib"},
-{ERR_R_PKCS7_LIB			,"PKCS7 lib"},
-{ERR_R_X509V3_LIB			,"X509V3 lib"},
-{ERR_R_PKCS12_LIB			,"PKCS12 lib"},
-{ERR_R_RAND_LIB				,"RAND lib"},
-{ERR_R_DSO_LIB				,"DSO lib"},
-{ERR_R_ENGINE_LIB			,"ENGINE lib"},
-{ERR_R_OCSP_LIB				,"OCSP lib"},
-
-{ERR_R_NESTED_ASN1_ERROR		,"nested asn1 error"},
-{ERR_R_BAD_ASN1_OBJECT_HEADER		,"bad asn1 object header"},
-{ERR_R_BAD_GET_ASN1_OBJECT_CALL		,"bad get asn1 object call"},
-{ERR_R_EXPECTING_AN_ASN1_SEQUENCE	,"expecting an asn1 sequence"},
-{ERR_R_ASN1_LENGTH_MISMATCH		,"asn1 length mismatch"},
-{ERR_R_MISSING_ASN1_EOS			,"missing asn1 eos"},
-
-{ERR_R_FATAL                            ,"fatal"},
-{ERR_R_MALLOC_FAILURE			,"malloc failure"},
-{ERR_R_SHOULD_NOT_HAVE_BEEN_CALLED	,"called a function you should not call"},
-{ERR_R_PASSED_NULL_PARAMETER		,"passed a null parameter"},
-{ERR_R_INTERNAL_ERROR			,"internal error"},
-{ERR_R_DISABLED				,"called a function that was disabled at compile-time"},
-
-{0,NULL},
-	};
-#endif
-
-
-/* Define the predeclared (but externally opaque) "ERR_FNS" type */
-struct st_ERR_FNS
-	{
-	/* Works on the "error_hash" string table */
-	LHASH *(*cb_err_get)(int create);
-	void (*cb_err_del)(void);
-	ERR_STRING_DATA *(*cb_err_get_item)(const ERR_STRING_DATA *);
-	ERR_STRING_DATA *(*cb_err_set_item)(ERR_STRING_DATA *);
-	ERR_STRING_DATA *(*cb_err_del_item)(ERR_STRING_DATA *);
-	/* Works on the "thread_hash" error-state table */
-	LHASH *(*cb_thread_get)(int create);
-	void (*cb_thread_release)(LHASH **hash);
-	ERR_STATE *(*cb_thread_get_item)(const ERR_STATE *);
-	ERR_STATE *(*cb_thread_set_item)(ERR_STATE *);
-	void (*cb_thread_del_item)(const ERR_STATE *);
-	/* Returns the next available error "library" numbers */
-	int (*cb_get_next_lib)(void);
-	};
-
-/* Predeclarations of the "err_defaults" functions */
-static LHASH *int_err_get(int create);
-static void int_err_del(void);
-static ERR_STRING_DATA *int_err_get_item(const ERR_STRING_DATA *);
-static ERR_STRING_DATA *int_err_set_item(ERR_STRING_DATA *);
-static ERR_STRING_DATA *int_err_del_item(ERR_STRING_DATA *);
-static LHASH *int_thread_get(int create);
-static void int_thread_release(LHASH **hash);
-static ERR_STATE *int_thread_get_item(const ERR_STATE *);
-static ERR_STATE *int_thread_set_item(ERR_STATE *);
-static void int_thread_del_item(const ERR_STATE *);
-static int int_err_get_next_lib(void);
-/* The static ERR_FNS table using these defaults functions */
-static const ERR_FNS err_defaults =
-	{
-	int_err_get,
-	int_err_del,
-	int_err_get_item,
-	int_err_set_item,
-	int_err_del_item,
-	int_thread_get,
-	int_thread_release,
-	int_thread_get_item,
-	int_thread_set_item,
-	int_thread_del_item,
-	int_err_get_next_lib
-	};
-
-/* The replacable table of ERR_FNS functions we use at run-time */
-static const ERR_FNS *err_fns = NULL;
-
-/* Eg. rather than using "err_get()", use "ERRFN(err_get)()". */
-#define ERRFN(a) err_fns->cb_##a
-
-/* The internal state used by "err_defaults" - as such, the setting, reading,
- * creating, and deleting of this data should only be permitted via the
- * "err_defaults" functions. This way, a linked module can completely defer all
- * ERR state operation (together with requisite locking) to the implementations
- * and state in the loading application. */
-static LHASH *int_error_hash = NULL;
-static LHASH *int_thread_hash = NULL;
-static int int_thread_hash_references = 0;
-static int int_err_library_number= ERR_LIB_USER;
-
-/* Internal function that checks whether "err_fns" is set and if not, sets it to
- * the defaults. */
-static void err_fns_check(void)
-	{
-	if (err_fns) return;
-	
-	CRYPTO_w_lock(CRYPTO_LOCK_ERR);
-	if (!err_fns)
-		err_fns = &err_defaults;
-	CRYPTO_w_unlock(CRYPTO_LOCK_ERR);
-	}
-
-/* API functions to get or set the underlying ERR functions. */
-
-const ERR_FNS *ERR_get_implementation(void)
-	{
-	err_fns_check();
-	return err_fns;
-	}
-
-int ERR_set_implementation(const ERR_FNS *fns)
-	{
-	int ret = 0;
-
-	CRYPTO_w_lock(CRYPTO_LOCK_ERR);
-	/* It's too late if 'err_fns' is non-NULL. BTW: not much point setting
-	 * an error is there?! */
-	if (!err_fns)
-		{
-		err_fns = fns;
-		ret = 1;
-		}
-	CRYPTO_w_unlock(CRYPTO_LOCK_ERR);
-	return ret;
-	}
-
-/* These are the callbacks provided to "lh_new()" when creating the LHASH tables
- * internal to the "err_defaults" implementation. */
-
-/* static unsigned long err_hash(ERR_STRING_DATA *a); */
-static unsigned long err_hash(const void *a_void);
-/* static int err_cmp(ERR_STRING_DATA *a, ERR_STRING_DATA *b); */
-static int err_cmp(const void *a_void, const void *b_void);
-/* static unsigned long pid_hash(ERR_STATE *pid); */
-static unsigned long pid_hash(const void *pid_void);
-/* static int pid_cmp(ERR_STATE *a,ERR_STATE *pid); */
-static int pid_cmp(const void *a_void,const void *pid_void);
-static unsigned long get_error_values(int inc,int top,const char **file,int *line,
-				      const char **data,int *flags);
-
-/* The internal functions used in the "err_defaults" implementation */
-
-static LHASH *int_err_get(int create)
-	{
-	LHASH *ret = NULL;
-
-	CRYPTO_w_lock(CRYPTO_LOCK_ERR);
-	if (!int_error_hash && create)
-		{
-		CRYPTO_push_info("int_err_get (err.c)");
-		int_error_hash = lh_new(err_hash, err_cmp);
-		CRYPTO_pop_info();
-		}
-	if (int_error_hash)
-		ret = int_error_hash;
-	CRYPTO_w_unlock(CRYPTO_LOCK_ERR);
-
-	return ret;
-	}
-
-static void int_err_del(void)
-	{
-	CRYPTO_w_lock(CRYPTO_LOCK_ERR);
-	if (int_error_hash)
-		{
-		lh_free(int_error_hash);
-		int_error_hash = NULL;
-		}
-	CRYPTO_w_unlock(CRYPTO_LOCK_ERR);
-	}
-
-static ERR_STRING_DATA *int_err_get_item(const ERR_STRING_DATA *d)
-	{
-	ERR_STRING_DATA *p;
-	LHASH *hash;
-
-	err_fns_check();
-	hash = ERRFN(err_get)(0);
-	if (!hash)
-		return NULL;
-
-	CRYPTO_r_lock(CRYPTO_LOCK_ERR);
-	p = (ERR_STRING_DATA *)lh_retrieve(hash, d);
-	CRYPTO_r_unlock(CRYPTO_LOCK_ERR);
-
-	return p;
-	}
-
-static ERR_STRING_DATA *int_err_set_item(ERR_STRING_DATA *d)
-	{
-	ERR_STRING_DATA *p;
-	LHASH *hash;
-
-	err_fns_check();
-	hash = ERRFN(err_get)(1);
-	if (!hash)
-		return NULL;
-
-	CRYPTO_w_lock(CRYPTO_LOCK_ERR);
-	p = (ERR_STRING_DATA *)lh_insert(hash, d);
-	CRYPTO_w_unlock(CRYPTO_LOCK_ERR);
-
-	return p;
-	}
-
-static ERR_STRING_DATA *int_err_del_item(ERR_STRING_DATA *d)
-	{
-	ERR_STRING_DATA *p;
-	LHASH *hash;
-
-	err_fns_check();
-	hash = ERRFN(err_get)(0);
-	if (!hash)
-		return NULL;
-
-	CRYPTO_w_lock(CRYPTO_LOCK_ERR);
-	p = (ERR_STRING_DATA *)lh_delete(hash, d);
-	CRYPTO_w_unlock(CRYPTO_LOCK_ERR);
-
-	return p;
-	}
-
-static LHASH *int_thread_get(int create)
-	{
-	LHASH *ret = NULL;
-
-	CRYPTO_w_lock(CRYPTO_LOCK_ERR);
-	if (!int_thread_hash && create)
-		{
-		CRYPTO_push_info("int_thread_get (err.c)");
-		int_thread_hash = lh_new(pid_hash, pid_cmp);
-		CRYPTO_pop_info();
-		}
-	if (int_thread_hash)
-		{
-		int_thread_hash_references++;
-		ret = int_thread_hash;
-		}
-	CRYPTO_w_unlock(CRYPTO_LOCK_ERR);
-	return ret;
-	}
-
-static void int_thread_release(LHASH **hash)
-	{
-	int i;
-
-	if (hash == NULL || *hash == NULL)
-		return;
-
-	i = CRYPTO_add(&int_thread_hash_references, -1, CRYPTO_LOCK_ERR);
-
-#ifdef REF_PRINT
-	fprintf(stderr,"%4d:%s\n",int_thread_hash_references,"ERR");
-#endif
-	if (i > 0) return;
-#ifdef REF_CHECK
-	if (i < 0)
-		{
-		fprintf(stderr,"int_thread_release, bad reference count\n");
-		abort(); /* ok */
-		}
-#endif
-	*hash = NULL;
-	}
-
-static ERR_STATE *int_thread_get_item(const ERR_STATE *d)
-	{
-	ERR_STATE *p;
-	LHASH *hash;
-
-	err_fns_check();
-	hash = ERRFN(thread_get)(0);
-	if (!hash)
-		return NULL;
-
-	CRYPTO_r_lock(CRYPTO_LOCK_ERR);
-	p = (ERR_STATE *)lh_retrieve(hash, d);
-	CRYPTO_r_unlock(CRYPTO_LOCK_ERR);
-
-	ERRFN(thread_release)(&hash);
-	return p;
-	}
-
-static ERR_STATE *int_thread_set_item(ERR_STATE *d)
-	{
-	ERR_STATE *p;
-	LHASH *hash;
-
-	err_fns_check();
-	hash = ERRFN(thread_get)(1);
-	if (!hash)
-		return NULL;
-
-	CRYPTO_w_lock(CRYPTO_LOCK_ERR);
-	p = (ERR_STATE *)lh_insert(hash, d);
-	CRYPTO_w_unlock(CRYPTO_LOCK_ERR);
-
-	ERRFN(thread_release)(&hash);
-	return p;
-	}
-
-static void int_thread_del_item(const ERR_STATE *d)
-	{
-	ERR_STATE *p;
-	LHASH *hash;
-
-	err_fns_check();
-	hash = ERRFN(thread_get)(0);
-	if (!hash)
-		return;
-
-	CRYPTO_w_lock(CRYPTO_LOCK_ERR);
-	p = (ERR_STATE *)lh_delete(hash, d);
-	/* make sure we don't leak memory */
-	if (int_thread_hash_references == 1
-		&& int_thread_hash && (lh_num_items(int_thread_hash) == 0))
-		{
-		lh_free(int_thread_hash);
-		int_thread_hash = NULL;
-		}
-	CRYPTO_w_unlock(CRYPTO_LOCK_ERR);
-
-	ERRFN(thread_release)(&hash);
-	if (p)
-		ERR_STATE_free(p);
-	}
-
-static int int_err_get_next_lib(void)
-	{
-	int ret;
-
-	CRYPTO_w_lock(CRYPTO_LOCK_ERR);
-	ret = int_err_library_number++;
-	CRYPTO_w_unlock(CRYPTO_LOCK_ERR);
-
-	return ret;
-	}
-
-
-#ifndef OPENSSL_NO_ERR
-#define NUM_SYS_STR_REASONS 127
-#define LEN_SYS_STR_REASON 32
-
-static ERR_STRING_DATA SYS_str_reasons[NUM_SYS_STR_REASONS + 1];
-/* SYS_str_reasons is filled with copies of strerror() results at
- * initialization.
- * 'errno' values up to 127 should cover all usual errors,
- * others will be displayed numerically by ERR_error_string.
- * It is crucial that we have something for each reason code
- * that occurs in ERR_str_reasons, or bogus reason strings
- * will be returned for SYSerr(), which always gets an errno
- * value and never one of those 'standard' reason codes. */
-
-static void build_SYS_str_reasons(void)
-	{
-	/* OPENSSL_malloc cannot be used here, use static storage instead */
-	static char strerror_tab[NUM_SYS_STR_REASONS][LEN_SYS_STR_REASON];
-	int i;
-	static int init = 1;
-
-	CRYPTO_r_lock(CRYPTO_LOCK_ERR);
-	if (!init)
-		{
-		CRYPTO_r_unlock(CRYPTO_LOCK_ERR);
-		return;
-		}
-	
-	CRYPTO_r_unlock(CRYPTO_LOCK_ERR);
-	CRYPTO_w_lock(CRYPTO_LOCK_ERR);
-	if (!init)
-		{
-		CRYPTO_w_unlock(CRYPTO_LOCK_ERR);
-		return;
-		}
-
-	for (i = 1; i <= NUM_SYS_STR_REASONS; i++)
-		{
-		ERR_STRING_DATA *str = &SYS_str_reasons[i - 1];
-
-		str->error = (unsigned long)i;
-		if (str->string == NULL)
-			{
-			char (*dest)[LEN_SYS_STR_REASON] = &(strerror_tab[i - 1]);
-			char *src = strerror(i);
-			if (src != NULL)
-				{
-				strncpy(*dest, src, sizeof *dest);
-				(*dest)[sizeof *dest - 1] = '\0';
-				str->string = *dest;
-				}
-			}
-		if (str->string == NULL)
-			str->string = "unknown";
-		}
-
-	/* Now we still have SYS_str_reasons[NUM_SYS_STR_REASONS] = {0, NULL},
-	 * as required by ERR_load_strings. */
-
-	init = 0;
-	
-	CRYPTO_w_unlock(CRYPTO_LOCK_ERR);
-	}
-#endif
-
-#define err_clear_data(p,i) \
-	do { \
-	if (((p)->err_data[i] != NULL) && \
-		(p)->err_data_flags[i] & ERR_TXT_MALLOCED) \
-		{  \
-		OPENSSL_free((p)->err_data[i]); \
-		(p)->err_data[i]=NULL; \
-		} \
-	(p)->err_data_flags[i]=0; \
-	} while(0)
-
-#define err_clear(p,i) \
-	do { \
-	(p)->err_flags[i]=0; \
-	(p)->err_buffer[i]=0; \
-	err_clear_data(p,i); \
-	(p)->err_file[i]=NULL; \
-	(p)->err_line[i]= -1; \
-	} while(0)
-
-static void ERR_STATE_free(ERR_STATE *s)
-	{
-	int i;
-
-	if (s == NULL)
-	    return;
-
-	for (i=0; i<ERR_NUM_ERRORS; i++)
-		{
-		err_clear_data(s,i);
-		}
-	OPENSSL_free(s);
-	}
-
-void ERR_load_ERR_strings(void)
-	{
-	err_fns_check();
-#ifndef OPENSSL_NO_ERR
-	err_load_strings(0,ERR_str_libraries);
-	err_load_strings(0,ERR_str_reasons);
-	err_load_strings(ERR_LIB_SYS,ERR_str_functs);
-	build_SYS_str_reasons();
-	err_load_strings(ERR_LIB_SYS,SYS_str_reasons);
-#endif
-	}
-
-static void err_load_strings(int lib, ERR_STRING_DATA *str)
-	{
-	while (str->error)
-		{
-		if (lib)
-			str->error|=ERR_PACK(lib,0,0);
-		ERRFN(err_set_item)(str);
-		str++;
-		}
-	}
-
-void ERR_load_strings(int lib, ERR_STRING_DATA *str)
-	{
-	ERR_load_ERR_strings();
-	err_load_strings(lib, str);
-	}
-
-void ERR_unload_strings(int lib, ERR_STRING_DATA *str)
-	{
-	while (str->error)
-		{
-		if (lib)
-			str->error|=ERR_PACK(lib,0,0);
-		ERRFN(err_del_item)(str);
-		str++;
-		}
-	}
-
-void ERR_free_strings(void)
-	{
-	err_fns_check();
-	ERRFN(err_del)();
-	}
-
-/********************************************************/
-
-void ERR_put_error(int lib, int func, int reason, const char *file,
-	     int line)
-	{
-	ERR_STATE *es;
-
-#ifdef _OSD_POSIX
-	/* In the BS2000-OSD POSIX subsystem, the compiler generates
-	 * path names in the form "*POSIX(/etc/passwd)".
-	 * This dirty hack strips them to something sensible.
-	 * @@@ We shouldn't modify a const string, though.
-	 */
-	if (strncmp(file,"*POSIX(", sizeof("*POSIX(")-1) == 0) {
-		char *end;
-
-		/* Skip the "*POSIX(" prefix */
-		file += sizeof("*POSIX(")-1;
-		end = &file[strlen(file)-1];
-		if (*end == ')')
-			*end = '\0';
-		/* Optional: use the basename of the path only. */
-		if ((end = strrchr(file, '/')) != NULL)
-			file = &end[1];
-	}
-#endif
-	es=ERR_get_state();
-
-	es->top=(es->top+1)%ERR_NUM_ERRORS;
-	if (es->top == es->bottom)
-		es->bottom=(es->bottom+1)%ERR_NUM_ERRORS;
-	es->err_flags[es->top]=0;
-	es->err_buffer[es->top]=ERR_PACK(lib,func,reason);
-	es->err_file[es->top]=file;
-	es->err_line[es->top]=line;
-	err_clear_data(es,es->top);
-	}
-
-void ERR_clear_error(void)
-	{
-	int i;
-	ERR_STATE *es;
-
-	es=ERR_get_state();
-
-	for (i=0; i<ERR_NUM_ERRORS; i++)
-		{
-		err_clear(es,i);
-		}
-	es->top=es->bottom=0;
-	}
-
-
-unsigned long ERR_get_error(void)
-	{ return(get_error_values(1,0,NULL,NULL,NULL,NULL)); }
-
-unsigned long ERR_get_error_line(const char **file,
-	     int *line)
-	{ return(get_error_values(1,0,file,line,NULL,NULL)); }
-
-unsigned long ERR_get_error_line_data(const char **file, int *line,
-	     const char **data, int *flags)
-	{ return(get_error_values(1,0,file,line,data,flags)); }
-
-
-unsigned long ERR_peek_error(void)
-	{ return(get_error_values(0,0,NULL,NULL,NULL,NULL)); }
-
-unsigned long ERR_peek_error_line(const char **file, int *line)
-	{ return(get_error_values(0,0,file,line,NULL,NULL)); }
-
-unsigned long ERR_peek_error_line_data(const char **file, int *line,
-	     const char **data, int *flags)
-	{ return(get_error_values(0,0,file,line,data,flags)); }
-
-
-unsigned long ERR_peek_last_error(void)
-	{ return(get_error_values(0,1,NULL,NULL,NULL,NULL)); }
-
-unsigned long ERR_peek_last_error_line(const char **file, int *line)
-	{ return(get_error_values(0,1,file,line,NULL,NULL)); }
-
-unsigned long ERR_peek_last_error_line_data(const char **file, int *line,
-	     const char **data, int *flags)
-	{ return(get_error_values(0,1,file,line,data,flags)); }
-
-
-static unsigned long get_error_values(int inc, int top, const char **file, int *line,
-	     const char **data, int *flags)
-	{	
-	int i=0;
-	ERR_STATE *es;
-	unsigned long ret;
-
-	es=ERR_get_state();
-
-	if (inc && top)
-		{
-		if (file) *file = "";
-		if (line) *line = 0;
-		if (data) *data = "";
-		if (flags) *flags = 0;
-			
-		return ERR_R_INTERNAL_ERROR;
-		}
-
-	if (es->bottom == es->top) return 0;
-	if (top)
-		i=es->top;			 /* last error */
-	else
-		i=(es->bottom+1)%ERR_NUM_ERRORS; /* first error */
-
-	ret=es->err_buffer[i];
-	if (inc)
-		{
-		es->bottom=i;
-		es->err_buffer[i]=0;
-		}
-
-	if ((file != NULL) && (line != NULL))
-		{
-		if (es->err_file[i] == NULL)
-			{
-			*file="NA";
-			if (line != NULL) *line=0;
-			}
-		else
-			{
-			*file=es->err_file[i];
-			if (line != NULL) *line=es->err_line[i];
-			}
-		}
-
-	if (data == NULL)
-		{
-		if (inc)
-			{
-			err_clear_data(es, i);
-			}
-		}
-	else
-		{
-		if (es->err_data[i] == NULL)
-			{
-			*data="";
-			if (flags != NULL) *flags=0;
-			}
-		else
-			{
-			*data=es->err_data[i];
-			if (flags != NULL) *flags=es->err_data_flags[i];
-			}
-		}
-	return ret;
-	}
-
-void ERR_error_string_n(unsigned long e, char *buf, size_t len)
-	{
-	char lsbuf[64], fsbuf[64], rsbuf[64];
-	const char *ls,*fs,*rs;
-	unsigned long l,f,r;
-
-	l=ERR_GET_LIB(e);
-	f=ERR_GET_FUNC(e);
-	r=ERR_GET_REASON(e);
-
-	ls=ERR_lib_error_string(e);
-	fs=ERR_func_error_string(e);
-	rs=ERR_reason_error_string(e);
-
-	if (ls == NULL) 
-		BIO_snprintf(lsbuf, sizeof(lsbuf), "lib(%lu)", l);
-	if (fs == NULL)
-		BIO_snprintf(fsbuf, sizeof(fsbuf), "func(%lu)", f);
-	if (rs == NULL)
-		BIO_snprintf(rsbuf, sizeof(rsbuf), "reason(%lu)", r);
-
-	BIO_snprintf(buf, len,"error:%08lX:%s:%s:%s", e, ls?ls:lsbuf, 
-		fs?fs:fsbuf, rs?rs:rsbuf);
-	if (strlen(buf) == len-1)
-		{
-		/* output may be truncated; make sure we always have 5 
-		 * colon-separated fields, i.e. 4 colons ... */
-#define NUM_COLONS 4
-		if (len > NUM_COLONS) /* ... if possible */
-			{
-			int i;
-			char *s = buf;
-			
-			for (i = 0; i < NUM_COLONS; i++)
-				{
-				char *colon = strchr(s, ':');
-				if (colon == NULL || colon > &buf[len-1] - NUM_COLONS + i)
-					{
-					/* set colon no. i at last possible position
-					 * (buf[len-1] is the terminating 0)*/
-					colon = &buf[len-1] - NUM_COLONS + i;
-					*colon = ':';
-					}
-				s = colon + 1;
-				}
-			}
-		}
-	}
-
-/* BAD for multi-threading: uses a local buffer if ret == NULL */
-/* ERR_error_string_n should be used instead for ret != NULL
- * as ERR_error_string cannot know how large the buffer is */
-char *ERR_error_string(unsigned long e, char *ret)
-	{
-	static char buf[256];
-
-	if (ret == NULL) ret=buf;
-	ERR_error_string_n(e, ret, 256);
-
-	return ret;
-	}
-
-LHASH *ERR_get_string_table(void)
-	{
-	err_fns_check();
-	return ERRFN(err_get)(0);
-	}
-
-LHASH *ERR_get_err_state_table(void)
-	{
-	err_fns_check();
-	return ERRFN(thread_get)(0);
-	}
-
-void ERR_release_err_state_table(LHASH **hash)
-	{
-	err_fns_check();
-	ERRFN(thread_release)(hash);
-	}
-
-const char *ERR_lib_error_string(unsigned long e)
-	{
-	ERR_STRING_DATA d,*p;
-	unsigned long l;
-
-	err_fns_check();
-	l=ERR_GET_LIB(e);
-	d.error=ERR_PACK(l,0,0);
-	p=ERRFN(err_get_item)(&d);
-	return((p == NULL)?NULL:p->string);
-	}
-
-const char *ERR_func_error_string(unsigned long e)
-	{
-	ERR_STRING_DATA d,*p;
-	unsigned long l,f;
-
-	err_fns_check();
-	l=ERR_GET_LIB(e);
-	f=ERR_GET_FUNC(e);
-	d.error=ERR_PACK(l,f,0);
-	p=ERRFN(err_get_item)(&d);
-	return((p == NULL)?NULL:p->string);
-	}
-
-const char *ERR_reason_error_string(unsigned long e)
-	{
-	ERR_STRING_DATA d,*p=NULL;
-	unsigned long l,r;
-
-	err_fns_check();
-	l=ERR_GET_LIB(e);
-	r=ERR_GET_REASON(e);
-	d.error=ERR_PACK(l,0,r);
-	p=ERRFN(err_get_item)(&d);
-	if (!p)
-		{
-		d.error=ERR_PACK(0,0,r);
-		p=ERRFN(err_get_item)(&d);
-		}
-	return((p == NULL)?NULL:p->string);
-	}
-
-/* static unsigned long err_hash(ERR_STRING_DATA *a) */
-static unsigned long err_hash(const void *a_void)
-	{
-	unsigned long ret,l;
-
-	l=((const ERR_STRING_DATA *)a_void)->error;
-	ret=l^ERR_GET_LIB(l)^ERR_GET_FUNC(l);
-	return(ret^ret%19*13);
-	}
-
-/* static int err_cmp(ERR_STRING_DATA *a, ERR_STRING_DATA *b) */
-static int err_cmp(const void *a_void, const void *b_void)
-	{
-	return((int)(((const ERR_STRING_DATA *)a_void)->error -
-			((const ERR_STRING_DATA *)b_void)->error));
-	}
-
-/* static unsigned long pid_hash(ERR_STATE *a) */
-static unsigned long pid_hash(const void *a_void)
-	{
-	return(((const ERR_STATE *)a_void)->pid*13);
-	}
-
-/* static int pid_cmp(ERR_STATE *a, ERR_STATE *b) */
-static int pid_cmp(const void *a_void, const void *b_void)
-	{
-	return((int)((long)((const ERR_STATE *)a_void)->pid -
-			(long)((const ERR_STATE *)b_void)->pid));
-	}
-
-void ERR_remove_state(unsigned long pid)
-	{
-	ERR_STATE tmp;
-
-	err_fns_check();
-	if (pid == 0)
-		pid=(unsigned long)CRYPTO_thread_id();
-	tmp.pid=pid;
-	/* thread_del_item automatically destroys the LHASH if the number of
-	 * items reaches zero. */
-	ERRFN(thread_del_item)(&tmp);
-	}
-
-ERR_STATE *ERR_get_state(void)
-	{
-	static ERR_STATE fallback;
-	ERR_STATE *ret,tmp,*tmpp=NULL;
-	int i;
-	unsigned long pid;
-
-	err_fns_check();
-	pid=(unsigned long)CRYPTO_thread_id();
-	tmp.pid=pid;
-	ret=ERRFN(thread_get_item)(&tmp);
-
-	/* ret == the error state, if NULL, make a new one */
-	if (ret == NULL)
-		{
-		ret=(ERR_STATE *)OPENSSL_malloc(sizeof(ERR_STATE));
-		if (ret == NULL) return(&fallback);
-		ret->pid=pid;
-		ret->top=0;
-		ret->bottom=0;
-		for (i=0; i<ERR_NUM_ERRORS; i++)
-			{
-			ret->err_data[i]=NULL;
-			ret->err_data_flags[i]=0;
-			}
-		tmpp = ERRFN(thread_set_item)(ret);
-		/* To check if insertion failed, do a get. */
-		if (ERRFN(thread_get_item)(ret) != ret)
-			{
-			ERR_STATE_free(ret); /* could not insert it */
-			return(&fallback);
-			}
-		/* If a race occured in this function and we came second, tmpp
-		 * is the first one that we just replaced. */
-		if (tmpp)
-			ERR_STATE_free(tmpp);
-		}
-	return ret;
-	}
-
-int ERR_get_next_error_library(void)
-	{
-	err_fns_check();
-	return ERRFN(get_next_lib)();
-	}
-
-void ERR_set_error_data(char *data, int flags)
-	{
-	ERR_STATE *es;
-	int i;
-
-	es=ERR_get_state();
-
-	i=es->top;
-	if (i == 0)
-		i=ERR_NUM_ERRORS-1;
-
-	err_clear_data(es,i);
-	es->err_data[i]=data;
-	es->err_data_flags[i]=flags;
-	}
-
-void ERR_add_error_data(int num, ...)
-	{
-	va_list args;
-	int i,n,s;
-	char *str,*p,*a;
-
-	s=80;
-	str=OPENSSL_malloc(s+1);
-	if (str == NULL) return;
-	str[0]='\0';
-
-	va_start(args, num);
-	n=0;
-	for (i=0; i<num; i++)
-		{
-		a=va_arg(args, char*);
-		/* ignore NULLs, thanks to Bob Beck <beck@obtuse.com> */
-		if (a != NULL)
-			{
-			n+=strlen(a);
-			if (n > s)
-				{
-				s=n+20;
-				p=OPENSSL_realloc(str,s+1);
-				if (p == NULL)
-					{
-					OPENSSL_free(str);
-					goto err;
-					}
-				else
-					str=p;
-				}
-			BUF_strlcat(str,a,(size_t)s+1);
-			}
-		}
-	ERR_set_error_data(str,ERR_TXT_MALLOCED|ERR_TXT_STRING);
-
-err:
-	va_end(args);
-	}
-
-int ERR_set_mark(void)
-	{
-	ERR_STATE *es;
-
-	es=ERR_get_state();
-
-	if (es->bottom == es->top) return 0;
-	es->err_flags[es->top]|=ERR_FLAG_MARK;
-	return 1;
-	}
-
-int ERR_pop_to_mark(void)
-	{
-	ERR_STATE *es;
-
-	es=ERR_get_state();
-
-	while(es->bottom != es->top
-		&& (es->err_flags[es->top] & ERR_FLAG_MARK) == 0)
-		{
-		err_clear(es,es->top);
-		es->top-=1;
-		if (es->top == -1) es->top=ERR_NUM_ERRORS-1;
-		}
-		
-	if (es->bottom == es->top) return 0;
-	es->err_flags[es->top]&=~ERR_FLAG_MARK;
-	return 1;
-	}
diff --git a/crypto/openssl/crypto/err/err.h b/crypto/openssl/crypto/err/err.h
deleted file mode 100644
index b723cd977a44..000000000000
--- a/crypto/openssl/crypto/err/err.h
+++ /dev/null
@@ -1,318 +0,0 @@
-/* crypto/err/err.h */
-/* Copyright (C) 1995-1998 Eric Young (eay@cryptsoft.com)
- * All rights reserved.
- *
- * This package is an SSL implementation written
- * by Eric Young (eay@cryptsoft.com).
- * The implementation was written so as to conform with Netscapes SSL.
- * 
- * This library is free for commercial and non-commercial use as long as
- * the following conditions are aheared to.  The following conditions
- * apply to all code found in this distribution, be it the RC4, RSA,
- * lhash, DES, etc., code; not just the SSL code.  The SSL documentation
- * included with this distribution is covered by the same copyright terms
- * except that the holder is Tim Hudson (tjh@cryptsoft.com).
- * 
- * Copyright remains Eric Young's, and as such any Copyright notices in
- * the code are not to be removed.
- * If this package is used in a product, Eric Young should be given attribution
- * as the author of the parts of the library used.
- * This can be in the form of a textual message at program startup or
- * in documentation (online or textual) provided with the package.
- * 
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions
- * are met:
- * 1. Redistributions of source code must retain the copyright
- *    notice, this list of conditions and the following disclaimer.
- * 2. Redistributions in binary form must reproduce the above copyright
- *    notice, this list of conditions and the following disclaimer in the
- *    documentation and/or other materials provided with the distribution.
- * 3. All advertising materials mentioning features or use of this software
- *    must display the following acknowledgement:
- *    "This product includes cryptographic software written by
- *     Eric Young (eay@cryptsoft.com)"
- *    The word 'cryptographic' can be left out if the rouines from the library
- *    being used are not cryptographic related :-).
- * 4. If you include any Windows specific code (or a derivative thereof) from 
- *    the apps directory (application code) you must include an acknowledgement:
- *    "This product includes software written by Tim Hudson (tjh@cryptsoft.com)"
- * 
- * THIS SOFTWARE IS PROVIDED BY ERIC YOUNG ``AS IS'' AND
- * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
- * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
- * ARE DISCLAIMED.  IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE
- * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
- * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
- * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
- * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
- * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
- * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
- * SUCH DAMAGE.
- * 
- * The licence and distribution terms for any publically available version or
- * derivative of this code cannot be changed.  i.e. this code cannot simply be
- * copied and put under another distribution licence
- * [including the GNU Public Licence.]
- */
-
-#ifndef HEADER_ERR_H
-#define HEADER_ERR_H
-
-#include <openssl/e_os2.h>
-
-#ifndef OPENSSL_NO_FP_API
-#include <stdio.h>
-#include <stdlib.h>
-#endif
-
-#include <openssl/ossl_typ.h>
-#ifndef OPENSSL_NO_BIO
-#include <openssl/bio.h>
-#endif
-#ifndef OPENSSL_NO_LHASH
-#include <openssl/lhash.h>
-#endif
-
-#ifdef	__cplusplus
-extern "C" {
-#endif
-
-#ifndef OPENSSL_NO_ERR
-#define ERR_PUT_error(a,b,c,d,e)	ERR_put_error(a,b,c,d,e)
-#else
-#define ERR_PUT_error(a,b,c,d,e)	ERR_put_error(a,b,c,NULL,0)
-#endif
-
-#include <errno.h>
-
-#define ERR_TXT_MALLOCED	0x01
-#define ERR_TXT_STRING		0x02
-
-#define ERR_FLAG_MARK		0x01
-
-#define ERR_NUM_ERRORS	16
-typedef struct err_state_st
-	{
-	unsigned long pid;
-	int err_flags[ERR_NUM_ERRORS];
-	unsigned long err_buffer[ERR_NUM_ERRORS];
-	char *err_data[ERR_NUM_ERRORS];
-	int err_data_flags[ERR_NUM_ERRORS];
-	const char *err_file[ERR_NUM_ERRORS];
-	int err_line[ERR_NUM_ERRORS];
-	int top,bottom;
-	} ERR_STATE;
-
-/* library */
-#define ERR_LIB_NONE		1
-#define ERR_LIB_SYS		2
-#define ERR_LIB_BN		3
-#define ERR_LIB_RSA		4
-#define ERR_LIB_DH		5
-#define ERR_LIB_EVP		6
-#define ERR_LIB_BUF		7
-#define ERR_LIB_OBJ		8
-#define ERR_LIB_PEM		9
-#define ERR_LIB_DSA		10
-#define ERR_LIB_X509		11
-/* #define ERR_LIB_METH         12 */
-#define ERR_LIB_ASN1		13
-#define ERR_LIB_CONF		14
-#define ERR_LIB_CRYPTO		15
-#define ERR_LIB_EC		16
-#define ERR_LIB_SSL		20
-/* #define ERR_LIB_SSL23        21 */
-/* #define ERR_LIB_SSL2         22 */
-/* #define ERR_LIB_SSL3         23 */
-/* #define ERR_LIB_RSAREF       30 */
-/* #define ERR_LIB_PROXY        31 */
-#define ERR_LIB_BIO		32
-#define ERR_LIB_PKCS7		33
-#define ERR_LIB_X509V3		34
-#define ERR_LIB_PKCS12		35
-#define ERR_LIB_RAND		36
-#define ERR_LIB_DSO		37
-#define ERR_LIB_ENGINE		38
-#define ERR_LIB_OCSP            39
-#define ERR_LIB_UI              40
-#define ERR_LIB_COMP            41
-#define ERR_LIB_ECDSA		42
-#define ERR_LIB_ECDH		43
-#define ERR_LIB_STORE           44
-
-#define ERR_LIB_USER		128
-
-#define SYSerr(f,r)  ERR_PUT_error(ERR_LIB_SYS,(f),(r),__FILE__,__LINE__)
-#define BNerr(f,r)   ERR_PUT_error(ERR_LIB_BN,(f),(r),__FILE__,__LINE__)
-#define RSAerr(f,r)  ERR_PUT_error(ERR_LIB_RSA,(f),(r),__FILE__,__LINE__)
-#define DHerr(f,r)   ERR_PUT_error(ERR_LIB_DH,(f),(r),__FILE__,__LINE__)
-#define EVPerr(f,r)  ERR_PUT_error(ERR_LIB_EVP,(f),(r),__FILE__,__LINE__)
-#define BUFerr(f,r)  ERR_PUT_error(ERR_LIB_BUF,(f),(r),__FILE__,__LINE__)
-#define OBJerr(f,r)  ERR_PUT_error(ERR_LIB_OBJ,(f),(r),__FILE__,__LINE__)
-#define PEMerr(f,r)  ERR_PUT_error(ERR_LIB_PEM,(f),(r),__FILE__,__LINE__)
-#define DSAerr(f,r)  ERR_PUT_error(ERR_LIB_DSA,(f),(r),__FILE__,__LINE__)
-#define X509err(f,r) ERR_PUT_error(ERR_LIB_X509,(f),(r),__FILE__,__LINE__)
-#define ASN1err(f,r) ERR_PUT_error(ERR_LIB_ASN1,(f),(r),__FILE__,__LINE__)
-#define CONFerr(f,r) ERR_PUT_error(ERR_LIB_CONF,(f),(r),__FILE__,__LINE__)
-#define CRYPTOerr(f,r) ERR_PUT_error(ERR_LIB_CRYPTO,(f),(r),__FILE__,__LINE__)
-#define ECerr(f,r)   ERR_PUT_error(ERR_LIB_EC,(f),(r),__FILE__,__LINE__)
-#define SSLerr(f,r)  ERR_PUT_error(ERR_LIB_SSL,(f),(r),__FILE__,__LINE__)
-#define BIOerr(f,r)  ERR_PUT_error(ERR_LIB_BIO,(f),(r),__FILE__,__LINE__)
-#define PKCS7err(f,r) ERR_PUT_error(ERR_LIB_PKCS7,(f),(r),__FILE__,__LINE__)
-#define X509V3err(f,r) ERR_PUT_error(ERR_LIB_X509V3,(f),(r),__FILE__,__LINE__)
-#define PKCS12err(f,r) ERR_PUT_error(ERR_LIB_PKCS12,(f),(r),__FILE__,__LINE__)
-#define RANDerr(f,r) ERR_PUT_error(ERR_LIB_RAND,(f),(r),__FILE__,__LINE__)
-#define DSOerr(f,r) ERR_PUT_error(ERR_LIB_DSO,(f),(r),__FILE__,__LINE__)
-#define ENGINEerr(f,r) ERR_PUT_error(ERR_LIB_ENGINE,(f),(r),__FILE__,__LINE__)
-#define OCSPerr(f,r) ERR_PUT_error(ERR_LIB_OCSP,(f),(r),__FILE__,__LINE__)
-#define UIerr(f,r) ERR_PUT_error(ERR_LIB_UI,(f),(r),__FILE__,__LINE__)
-#define COMPerr(f,r) ERR_PUT_error(ERR_LIB_COMP,(f),(r),__FILE__,__LINE__)
-#define ECDSAerr(f,r)  ERR_PUT_error(ERR_LIB_ECDSA,(f),(r),__FILE__,__LINE__)
-#define ECDHerr(f,r)  ERR_PUT_error(ERR_LIB_ECDH,(f),(r),__FILE__,__LINE__)
-#define STOREerr(f,r) ERR_PUT_error(ERR_LIB_STORE,(f),(r),__FILE__,__LINE__)
-
-/* Borland C seems too stupid to be able to shift and do longs in
- * the pre-processor :-( */
-#define ERR_PACK(l,f,r)		(((((unsigned long)l)&0xffL)*0x1000000)| \
-				((((unsigned long)f)&0xfffL)*0x1000)| \
-				((((unsigned long)r)&0xfffL)))
-#define ERR_GET_LIB(l)		(int)((((unsigned long)l)>>24L)&0xffL)
-#define ERR_GET_FUNC(l)		(int)((((unsigned long)l)>>12L)&0xfffL)
-#define ERR_GET_REASON(l)	(int)((l)&0xfffL)
-#define ERR_FATAL_ERROR(l)	(int)((l)&ERR_R_FATAL)
-
-
-/* OS functions */
-#define SYS_F_FOPEN		1
-#define SYS_F_CONNECT		2
-#define SYS_F_GETSERVBYNAME	3
-#define SYS_F_SOCKET		4
-#define SYS_F_IOCTLSOCKET	5
-#define SYS_F_BIND		6
-#define SYS_F_LISTEN		7
-#define SYS_F_ACCEPT		8
-#define SYS_F_WSASTARTUP	9 /* Winsock stuff */
-#define SYS_F_OPENDIR		10
-#define SYS_F_FREAD		11
-
-
-/* reasons */
-#define ERR_R_SYS_LIB	ERR_LIB_SYS       /* 2 */
-#define ERR_R_BN_LIB	ERR_LIB_BN        /* 3 */
-#define ERR_R_RSA_LIB	ERR_LIB_RSA       /* 4 */
-#define ERR_R_DH_LIB	ERR_LIB_DH        /* 5 */
-#define ERR_R_EVP_LIB	ERR_LIB_EVP       /* 6 */
-#define ERR_R_BUF_LIB	ERR_LIB_BUF       /* 7 */
-#define ERR_R_OBJ_LIB	ERR_LIB_OBJ       /* 8 */
-#define ERR_R_PEM_LIB	ERR_LIB_PEM       /* 9 */
-#define ERR_R_DSA_LIB	ERR_LIB_DSA      /* 10 */
-#define ERR_R_X509_LIB	ERR_LIB_X509     /* 11 */
-#define ERR_R_ASN1_LIB	ERR_LIB_ASN1     /* 13 */
-#define ERR_R_CONF_LIB	ERR_LIB_CONF     /* 14 */
-#define ERR_R_CRYPTO_LIB ERR_LIB_CRYPTO  /* 15 */
-#define ERR_R_EC_LIB	ERR_LIB_EC       /* 16 */
-#define ERR_R_SSL_LIB	ERR_LIB_SSL      /* 20 */
-#define ERR_R_BIO_LIB	ERR_LIB_BIO      /* 32 */
-#define ERR_R_PKCS7_LIB	ERR_LIB_PKCS7    /* 33 */
-#define ERR_R_X509V3_LIB ERR_LIB_X509V3  /* 34 */
-#define ERR_R_PKCS12_LIB ERR_LIB_PKCS12  /* 35 */
-#define ERR_R_RAND_LIB	ERR_LIB_RAND     /* 36 */
-#define ERR_R_DSO_LIB	ERR_LIB_DSO      /* 37 */
-#define ERR_R_ENGINE_LIB ERR_LIB_ENGINE  /* 38 */
-#define ERR_R_OCSP_LIB  ERR_LIB_OCSP     /* 39 */
-#define ERR_R_UI_LIB    ERR_LIB_UI       /* 40 */
-#define ERR_R_COMP_LIB	ERR_LIB_COMP     /* 41 */
-#define ERR_R_ECDSA_LIB ERR_LIB_ECDSA	 /* 42 */
-#define ERR_R_ECDH_LIB  ERR_LIB_ECDH	 /* 43 */
-#define ERR_R_STORE_LIB ERR_LIB_STORE    /* 44 */
-
-#define ERR_R_NESTED_ASN1_ERROR			58
-#define ERR_R_BAD_ASN1_OBJECT_HEADER		59
-#define ERR_R_BAD_GET_ASN1_OBJECT_CALL		60
-#define ERR_R_EXPECTING_AN_ASN1_SEQUENCE	61
-#define ERR_R_ASN1_LENGTH_MISMATCH		62
-#define ERR_R_MISSING_ASN1_EOS			63
-
-/* fatal error */
-#define ERR_R_FATAL				64
-#define	ERR_R_MALLOC_FAILURE			(1|ERR_R_FATAL)
-#define	ERR_R_SHOULD_NOT_HAVE_BEEN_CALLED	(2|ERR_R_FATAL)
-#define	ERR_R_PASSED_NULL_PARAMETER		(3|ERR_R_FATAL)
-#define	ERR_R_INTERNAL_ERROR			(4|ERR_R_FATAL)
-#define	ERR_R_DISABLED				(5|ERR_R_FATAL)
-
-/* 99 is the maximum possible ERR_R_... code, higher values
- * are reserved for the individual libraries */
-
-
-typedef struct ERR_string_data_st
-	{
-	unsigned long error;
-	const char *string;
-	} ERR_STRING_DATA;
-
-void ERR_put_error(int lib, int func,int reason,const char *file,int line);
-void ERR_set_error_data(char *data,int flags);
-
-unsigned long ERR_get_error(void);
-unsigned long ERR_get_error_line(const char **file,int *line);
-unsigned long ERR_get_error_line_data(const char **file,int *line,
-				      const char **data, int *flags);
-unsigned long ERR_peek_error(void);
-unsigned long ERR_peek_error_line(const char **file,int *line);
-unsigned long ERR_peek_error_line_data(const char **file,int *line,
-				       const char **data,int *flags);
-unsigned long ERR_peek_last_error(void);
-unsigned long ERR_peek_last_error_line(const char **file,int *line);
-unsigned long ERR_peek_last_error_line_data(const char **file,int *line,
-				       const char **data,int *flags);
-void ERR_clear_error(void );
-char *ERR_error_string(unsigned long e,char *buf);
-void ERR_error_string_n(unsigned long e, char *buf, size_t len);
-const char *ERR_lib_error_string(unsigned long e);
-const char *ERR_func_error_string(unsigned long e);
-const char *ERR_reason_error_string(unsigned long e);
-void ERR_print_errors_cb(int (*cb)(const char *str, size_t len, void *u),
-			 void *u);
-#ifndef OPENSSL_NO_FP_API
-void ERR_print_errors_fp(FILE *fp);
-#endif
-#ifndef OPENSSL_NO_BIO
-void ERR_print_errors(BIO *bp);
-void ERR_add_error_data(int num, ...);
-#endif
-void ERR_load_strings(int lib,ERR_STRING_DATA str[]);
-void ERR_unload_strings(int lib,ERR_STRING_DATA str[]);
-void ERR_load_ERR_strings(void);
-void ERR_load_crypto_strings(void);
-void ERR_free_strings(void);
-
-void ERR_remove_state(unsigned long pid); /* if zero we look it up */
-ERR_STATE *ERR_get_state(void);
-
-#ifndef OPENSSL_NO_LHASH
-LHASH *ERR_get_string_table(void);
-LHASH *ERR_get_err_state_table(void);
-void ERR_release_err_state_table(LHASH **hash);
-#endif
-
-int ERR_get_next_error_library(void);
-
-int ERR_set_mark(void);
-int ERR_pop_to_mark(void);
-
-/* Already defined in ossl_typ.h */
-/* typedef struct st_ERR_FNS ERR_FNS; */
-/* An application can use this function and provide the return value to loaded
- * modules that should use the application's ERR state/functionality */
-const ERR_FNS *ERR_get_implementation(void);
-/* A loaded module should call this function prior to any ERR operations using
- * the application's "ERR_FNS". */
-int ERR_set_implementation(const ERR_FNS *fns);
-
-#ifdef	__cplusplus
-}
-#endif
-
-#endif
diff --git a/crypto/openssl/crypto/err/err_all.c b/crypto/openssl/crypto/err/err_all.c
deleted file mode 100644
index c33d24bb68c6..000000000000
--- a/crypto/openssl/crypto/err/err_all.c
+++ /dev/null
@@ -1,142 +0,0 @@
-/* crypto/err/err_all.c */
-/* Copyright (C) 1995-1998 Eric Young (eay@cryptsoft.com)
- * All rights reserved.
- *
- * This package is an SSL implementation written
- * by Eric Young (eay@cryptsoft.com).
- * The implementation was written so as to conform with Netscapes SSL.
- * 
- * This library is free for commercial and non-commercial use as long as
- * the following conditions are aheared to.  The following conditions
- * apply to all code found in this distribution, be it the RC4, RSA,
- * lhash, DES, etc., code; not just the SSL code.  The SSL documentation
- * included with this distribution is covered by the same copyright terms
- * except that the holder is Tim Hudson (tjh@cryptsoft.com).
- * 
- * Copyright remains Eric Young's, and as such any Copyright notices in
- * the code are not to be removed.
- * If this package is used in a product, Eric Young should be given attribution
- * as the author of the parts of the library used.
- * This can be in the form of a textual message at program startup or
- * in documentation (online or textual) provided with the package.
- * 
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions
- * are met:
- * 1. Redistributions of source code must retain the copyright
- *    notice, this list of conditions and the following disclaimer.
- * 2. Redistributions in binary form must reproduce the above copyright
- *    notice, this list of conditions and the following disclaimer in the
- *    documentation and/or other materials provided with the distribution.
- * 3. All advertising materials mentioning features or use of this software
- *    must display the following acknowledgement:
- *    "This product includes cryptographic software written by
- *     Eric Young (eay@cryptsoft.com)"
- *    The word 'cryptographic' can be left out if the rouines from the library
- *    being used are not cryptographic related :-).
- * 4. If you include any Windows specific code (or a derivative thereof) from 
- *    the apps directory (application code) you must include an acknowledgement:
- *    "This product includes software written by Tim Hudson (tjh@cryptsoft.com)"
- * 
- * THIS SOFTWARE IS PROVIDED BY ERIC YOUNG ``AS IS'' AND
- * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
- * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
- * ARE DISCLAIMED.  IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE
- * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
- * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
- * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
- * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
- * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
- * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
- * SUCH DAMAGE.
- * 
- * The licence and distribution terms for any publically available version or
- * derivative of this code cannot be changed.  i.e. this code cannot simply be
- * copied and put under another distribution licence
- * [including the GNU Public Licence.]
- */
-
-#include <stdio.h>
-#include <openssl/asn1.h>
-#include <openssl/bn.h>
-#ifndef OPENSSL_NO_EC
-#include <openssl/ec.h>
-#endif
-#include <openssl/buffer.h>
-#include <openssl/bio.h>
-#ifndef OPENSSL_NO_RSA
-#include <openssl/rsa.h>
-#endif
-#ifndef OPENSSL_NO_DH
-#include <openssl/dh.h>
-#endif
-#ifndef OPENSSL_NO_DSA
-#include <openssl/dsa.h>
-#endif
-#ifndef OPENSSL_NO_ECDSA
-#include <openssl/ecdsa.h>
-#endif
-#ifndef OPENSSL_NO_ECDH
-#include <openssl/ecdh.h>
-#endif
-#include <openssl/evp.h>
-#include <openssl/objects.h>
-#include <openssl/pem2.h>
-#include <openssl/x509.h>
-#include <openssl/x509v3.h>
-#include <openssl/conf.h>
-#include <openssl/pkcs12.h>
-#include <openssl/rand.h>
-#include <openssl/dso.h>
-#ifndef OPENSSL_NO_ENGINE
-#include <openssl/engine.h>
-#endif
-#include <openssl/ui.h>
-#include <openssl/ocsp.h>
-#include <openssl/err.h>
-
-void ERR_load_crypto_strings(void)
-	{
-#ifndef OPENSSL_NO_ERR
-	ERR_load_ERR_strings(); /* include error strings for SYSerr */
-	ERR_load_BN_strings();
-#ifndef OPENSSL_NO_RSA
-	ERR_load_RSA_strings();
-#endif
-#ifndef OPENSSL_NO_DH
-	ERR_load_DH_strings();
-#endif
-	ERR_load_EVP_strings();
-	ERR_load_BUF_strings();
-	ERR_load_OBJ_strings();
-	ERR_load_PEM_strings();
-#ifndef OPENSSL_NO_DSA
-	ERR_load_DSA_strings();
-#endif
-	ERR_load_X509_strings();
-	ERR_load_ASN1_strings();
-	ERR_load_CONF_strings();
-	ERR_load_CRYPTO_strings();
-#ifndef OPENSSL_NO_EC
-	ERR_load_EC_strings();
-#endif
-#ifndef OPENSSL_NO_ECDSA
-	ERR_load_ECDSA_strings();
-#endif
-#ifndef OPENSSL_NO_ECDH
-	ERR_load_ECDH_strings();
-#endif
-	/* skip ERR_load_SSL_strings() because it is not in this library */
-	ERR_load_BIO_strings();
-	ERR_load_PKCS7_strings();	
-	ERR_load_X509V3_strings();
-	ERR_load_PKCS12_strings();
-	ERR_load_RAND_strings();
-	ERR_load_DSO_strings();
-#ifndef OPENSSL_NO_ENGINE
-	ERR_load_ENGINE_strings();
-#endif
-	ERR_load_OCSP_strings();
-	ERR_load_UI_strings();
-#endif
-	}
diff --git a/crypto/openssl/crypto/err/err_prn.c b/crypto/openssl/crypto/err/err_prn.c
deleted file mode 100644
index 2224a901e5ea..000000000000
--- a/crypto/openssl/crypto/err/err_prn.c
+++ /dev/null
@@ -1,111 +0,0 @@
-/* crypto/err/err_prn.c */
-/* Copyright (C) 1995-1998 Eric Young (eay@cryptsoft.com)
- * All rights reserved.
- *
- * This package is an SSL implementation written
- * by Eric Young (eay@cryptsoft.com).
- * The implementation was written so as to conform with Netscapes SSL.
- * 
- * This library is free for commercial and non-commercial use as long as
- * the following conditions are aheared to.  The following conditions
- * apply to all code found in this distribution, be it the RC4, RSA,
- * lhash, DES, etc., code; not just the SSL code.  The SSL documentation
- * included with this distribution is covered by the same copyright terms
- * except that the holder is Tim Hudson (tjh@cryptsoft.com).
- * 
- * Copyright remains Eric Young's, and as such any Copyright notices in
- * the code are not to be removed.
- * If this package is used in a product, Eric Young should be given attribution
- * as the author of the parts of the library used.
- * This can be in the form of a textual message at program startup or
- * in documentation (online or textual) provided with the package.
- * 
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions
- * are met:
- * 1. Redistributions of source code must retain the copyright
- *    notice, this list of conditions and the following disclaimer.
- * 2. Redistributions in binary form must reproduce the above copyright
- *    notice, this list of conditions and the following disclaimer in the
- *    documentation and/or other materials provided with the distribution.
- * 3. All advertising materials mentioning features or use of this software
- *    must display the following acknowledgement:
- *    "This product includes cryptographic software written by
- *     Eric Young (eay@cryptsoft.com)"
- *    The word 'cryptographic' can be left out if the rouines from the library
- *    being used are not cryptographic related :-).
- * 4. If you include any Windows specific code (or a derivative thereof) from 
- *    the apps directory (application code) you must include an acknowledgement:
- *    "This product includes software written by Tim Hudson (tjh@cryptsoft.com)"
- * 
- * THIS SOFTWARE IS PROVIDED BY ERIC YOUNG ``AS IS'' AND
- * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
- * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
- * ARE DISCLAIMED.  IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE
- * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
- * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
- * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
- * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
- * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
- * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
- * SUCH DAMAGE.
- * 
- * The licence and distribution terms for any publically available version or
- * derivative of this code cannot be changed.  i.e. this code cannot simply be
- * copied and put under another distribution licence
- * [including the GNU Public Licence.]
- */
-
-#include <stdio.h>
-#include "cryptlib.h"
-#include <openssl/lhash.h>
-#include <openssl/crypto.h>
-#include <openssl/buffer.h>
-#include <openssl/err.h>
-
-void ERR_print_errors_cb(int (*cb)(const char *str, size_t len, void *u),
-			 void *u)
-	{
-	unsigned long l;
-	char buf[256];
-	char buf2[4096];
-	const char *file,*data;
-	int line,flags;
-	unsigned long es;
-
-	es=CRYPTO_thread_id();
-	while ((l=ERR_get_error_line_data(&file,&line,&data,&flags)) != 0)
-		{
-		ERR_error_string_n(l, buf, sizeof buf);
-		BIO_snprintf(buf2, sizeof(buf2), "%lu:%s:%s:%d:%s\n", es, buf,
-			file, line, (flags & ERR_TXT_STRING) ? data : "");
-		cb(buf2, strlen(buf2), u);
-		}
-	}
-
-#ifndef OPENSSL_NO_FP_API
-static int print_fp(const char *str, size_t len, void *fp)
-	{
-	BIO bio;
-
-	BIO_set(&bio,BIO_s_file());
-	BIO_set_fp(&bio,fp,BIO_NOCLOSE);
-
-	return BIO_printf(&bio, "%s", str);
-	}
-void ERR_print_errors_fp(FILE *fp)
-	{
-	ERR_print_errors_cb(print_fp, fp);
-	}
-#endif
-
-static int print_bio(const char *str, size_t len, void *bp)
-	{
-	return BIO_write((BIO *)bp, str, len);
-	}
-void ERR_print_errors(BIO *bp)
-	{
-	ERR_print_errors_cb(print_bio, bp);
-	}
-
-	
diff --git a/crypto/openssl/crypto/err/openssl.ec b/crypto/openssl/crypto/err/openssl.ec
deleted file mode 100644
index 64200fcebaa3..000000000000
--- a/crypto/openssl/crypto/err/openssl.ec
+++ /dev/null
@@ -1,85 +0,0 @@
-# crypto/err/openssl.ec
-
-# configuration file for util/mkerr.pl
-
-# files that may have to be rewritten by util/mkerr.pl
-L ERR		NONE				NONE
-L BN		crypto/bn/bn.h			crypto/bn/bn_err.c
-L RSA		crypto/rsa/rsa.h		crypto/rsa/rsa_err.c
-L DH		crypto/dh/dh.h			crypto/dh/dh_err.c
-L EVP		crypto/evp/evp.h		crypto/evp/evp_err.c
-L BUF		crypto/buffer/buffer.h		crypto/buffer/buf_err.c
-L OBJ		crypto/objects/objects.h	crypto/objects/obj_err.c
-L PEM		crypto/pem/pem.h		crypto/pem/pem_err.c
-L DSA		crypto/dsa/dsa.h		crypto/dsa/dsa_err.c
-L X509		crypto/x509/x509.h		crypto/x509/x509_err.c
-L ASN1		crypto/asn1/asn1.h		crypto/asn1/asn1_err.c
-L CONF		crypto/conf/conf.h		crypto/conf/conf_err.c
-L CRYPTO	crypto/crypto.h			crypto/cpt_err.c
-L EC		crypto/ec/ec.h			crypto/ec/ec_err.c
-L SSL		ssl/ssl.h			ssl/ssl_err.c
-L BIO		crypto/bio/bio.h		crypto/bio/bio_err.c
-L PKCS7		crypto/pkcs7/pkcs7.h		crypto/pkcs7/pkcs7err.c
-L X509V3	crypto/x509v3/x509v3.h		crypto/x509v3/v3err.c
-L PKCS12	crypto/pkcs12/pkcs12.h		crypto/pkcs12/pk12err.c
-L RAND		crypto/rand/rand.h		crypto/rand/rand_err.c
-L DSO		crypto/dso/dso.h		crypto/dso/dso_err.c
-L ENGINE	crypto/engine/engine.h		crypto/engine/eng_err.c
-L OCSP		crypto/ocsp/ocsp.h		crypto/ocsp/ocsp_err.c
-L UI		crypto/ui/ui.h			crypto/ui/ui_err.c
-L COMP		crypto/comp/comp.h		crypto/comp/comp_err.c
-L ECDSA		crypto/ecdsa/ecdsa.h		crypto/ecdsa/ecs_err.c
-L ECDH		crypto/ecdh/ecdh.h		crypto/ecdh/ech_err.c
-L STORE		crypto/store/store.h		crypto/store/str_err.c
-
-# additional header files to be scanned for function names
-L NONE		crypto/x509/x509_vfy.h		NONE
-L NONE		crypto/ec/ec_lcl.h		NONE
-
-
-F RSAREF_F_RSA_BN2BIN
-F RSAREF_F_RSA_PRIVATE_DECRYPT
-F RSAREF_F_RSA_PRIVATE_ENCRYPT
-F RSAREF_F_RSA_PUBLIC_DECRYPT
-F RSAREF_F_RSA_PUBLIC_ENCRYPT
-#F SSL_F_CLIENT_CERTIFICATE
-
-R SSL_R_SSLV3_ALERT_UNEXPECTED_MESSAGE		1010
-R SSL_R_SSLV3_ALERT_BAD_RECORD_MAC		1020
-R SSL_R_TLSV1_ALERT_DECRYPTION_FAILED		1021
-R SSL_R_TLSV1_ALERT_RECORD_OVERFLOW		1022
-R SSL_R_SSLV3_ALERT_DECOMPRESSION_FAILURE	1030
-R SSL_R_SSLV3_ALERT_HANDSHAKE_FAILURE		1040
-R SSL_R_SSLV3_ALERT_NO_CERTIFICATE		1041
-R SSL_R_SSLV3_ALERT_BAD_CERTIFICATE		1042
-R SSL_R_SSLV3_ALERT_UNSUPPORTED_CERTIFICATE	1043
-R SSL_R_SSLV3_ALERT_CERTIFICATE_REVOKED		1044
-R SSL_R_SSLV3_ALERT_CERTIFICATE_EXPIRED		1045
-R SSL_R_SSLV3_ALERT_CERTIFICATE_UNKNOWN		1046
-R SSL_R_SSLV3_ALERT_ILLEGAL_PARAMETER		1047
-R SSL_R_TLSV1_ALERT_UNKNOWN_CA			1048
-R SSL_R_TLSV1_ALERT_ACCESS_DENIED		1049
-R SSL_R_TLSV1_ALERT_DECODE_ERROR		1050
-R SSL_R_TLSV1_ALERT_DECRYPT_ERROR		1051
-R SSL_R_TLSV1_ALERT_EXPORT_RESTRICTION		1060
-R SSL_R_TLSV1_ALERT_PROTOCOL_VERSION		1070
-R SSL_R_TLSV1_ALERT_INSUFFICIENT_SECURITY	1071
-R SSL_R_TLSV1_ALERT_INTERNAL_ERROR		1080
-R SSL_R_TLSV1_ALERT_USER_CANCELLED		1090
-R SSL_R_TLSV1_ALERT_NO_RENEGOTIATION		1100
-
-R RSAREF_R_CONTENT_ENCODING			0x0400
-R RSAREF_R_DATA					0x0401
-R RSAREF_R_DIGEST_ALGORITHM			0x0402
-R RSAREF_R_ENCODING				0x0403
-R RSAREF_R_KEY					0x0404
-R RSAREF_R_KEY_ENCODING				0x0405
-R RSAREF_R_LEN					0x0406
-R RSAREF_R_MODULUS_LEN				0x0407
-R RSAREF_R_NEED_RANDOM				0x0408
-R RSAREF_R_PRIVATE_KEY				0x0409
-R RSAREF_R_PUBLIC_KEY				0x040a
-R RSAREF_R_SIGNATURE				0x040b
-R RSAREF_R_SIGNATURE_ENCODING			0x040c
-R RSAREF_R_ENCRYPTION_ALGORITHM			0x040d
-
diff --git a/crypto/openssl/crypto/evp/Makefile b/crypto/openssl/crypto/evp/Makefile
deleted file mode 100644
index a4f9ae216740..000000000000
--- a/crypto/openssl/crypto/evp/Makefile
+++ /dev/null
@@ -1,638 +0,0 @@
-#
-# OpenSSL/crypto/evp/Makefile
-#
-
-DIR=	evp
-TOP=	../..
-CC=	cc
-INCLUDES= -I.. -I$(TOP) -I../../include
-CFLAG=-g
-MAKEFILE=	Makefile
-AR=		ar r
-
-CFLAGS= $(INCLUDES) $(CFLAG)
-
-GENERAL=Makefile
-TEST=evp_test.c
-TESTDATA=evptests.txt
-APPS=
-
-LIB=$(TOP)/libcrypto.a
-LIBSRC= encode.c digest.c evp_enc.c evp_key.c evp_acnf.c \
-	e_des.c e_bf.c e_idea.c e_des3.c e_camellia.c\
-	e_rc4.c e_aes.c names.c \
-	e_xcbc_d.c e_rc2.c e_cast.c e_rc5.c \
-	m_null.c m_md2.c m_md4.c m_md5.c m_sha.c m_sha1.c \
-	m_dss.c m_dss1.c m_mdc2.c m_ripemd.c m_ecdsa.c\
-	p_open.c p_seal.c p_sign.c p_verify.c p_lib.c p_enc.c p_dec.c \
-	bio_md.c bio_b64.c bio_enc.c evp_err.c e_null.c \
-	c_all.c c_allc.c c_alld.c evp_lib.c bio_ok.c \
-	evp_pkey.c evp_pbe.c p5_crpt.c p5_crpt2.c \
-	e_old.c
-
-LIBOBJ=	encode.o digest.o evp_enc.o evp_key.o evp_acnf.o \
-	e_des.o e_bf.o e_idea.o e_des3.o e_camellia.o\
-	e_rc4.o e_aes.o names.o \
-	e_xcbc_d.o e_rc2.o e_cast.o e_rc5.o \
-	m_null.o m_md2.o m_md4.o m_md5.o m_sha.o m_sha1.o \
-	m_dss.o m_dss1.o m_mdc2.o m_ripemd.o m_ecdsa.o\
-	p_open.o p_seal.o p_sign.o p_verify.o p_lib.o p_enc.o p_dec.o \
-	bio_md.o bio_b64.o bio_enc.o evp_err.o e_null.o \
-	c_all.o c_allc.o c_alld.o evp_lib.o bio_ok.o \
-	evp_pkey.o evp_pbe.o p5_crpt.o p5_crpt2.o \
-	e_old.o
-
-SRC= $(LIBSRC)
-
-EXHEADER= evp.h
-HEADER=	$(EXHEADER)
-
-ALL=    $(GENERAL) $(SRC) $(HEADER)
-
-top:
-	(cd ../..; $(MAKE) DIRS=crypto SDIRS=$(DIR) sub_all)
-
-all:	lib
-
-lib:	$(LIBOBJ)
-	$(AR) $(LIB) $(LIBOBJ)
-	$(RANLIB) $(LIB) || echo Never mind.
-	@touch lib
-
-files:
-	$(PERL) $(TOP)/util/files.pl Makefile >> $(TOP)/MINFO
-
-links:
-	@$(PERL) $(TOP)/util/mklink.pl ../../include/openssl $(EXHEADER)
-	@$(PERL) $(TOP)/util/mklink.pl ../../test $(TEST)
-	cp $(TESTDATA) ../../test
-	@$(PERL) $(TOP)/util/mklink.pl ../../apps $(APPS)
-
-install:
-	@[ -n "$(INSTALLTOP)" ] # should be set by top Makefile...
-	@headerlist="$(EXHEADER)"; for i in $$headerlist ; \
-	do  \
-	(cp $$i $(INSTALL_PREFIX)$(INSTALLTOP)/include/openssl/$$i; \
-	chmod 644 $(INSTALL_PREFIX)$(INSTALLTOP)/include/openssl/$$i ); \
-	done;
-
-tags:
-	ctags $(SRC)
-
-tests:
-
-lint:
-	lint -DLINT $(INCLUDES) $(SRC)>fluff
-
-depend:
-	@[ -n "$(MAKEDEPEND)" ] # should be set by upper Makefile...
-	$(MAKEDEPEND) -- $(CFLAG) $(INCLUDES) $(DEPFLAG) -- $(LIBSRC)
-
-dclean:
-	$(PERL) -pe 'if (/^# DO NOT DELETE THIS LINE/) {print; exit(0);}' $(MAKEFILE) >Makefile.new
-	mv -f Makefile.new $(MAKEFILE)
-
-clean:
-	rm -f *.o *.obj lib tags core .pure .nfs* *.old *.bak fluff
-
-# DO NOT DELETE THIS LINE -- make depend depends on it.
-
-bio_b64.o: ../../e_os.h ../../include/openssl/asn1.h
-bio_b64.o: ../../include/openssl/bio.h ../../include/openssl/buffer.h
-bio_b64.o: ../../include/openssl/crypto.h ../../include/openssl/e_os2.h
-bio_b64.o: ../../include/openssl/err.h ../../include/openssl/evp.h
-bio_b64.o: ../../include/openssl/lhash.h ../../include/openssl/obj_mac.h
-bio_b64.o: ../../include/openssl/objects.h ../../include/openssl/opensslconf.h
-bio_b64.o: ../../include/openssl/opensslv.h ../../include/openssl/ossl_typ.h
-bio_b64.o: ../../include/openssl/safestack.h ../../include/openssl/stack.h
-bio_b64.o: ../../include/openssl/symhacks.h ../cryptlib.h bio_b64.c
-bio_enc.o: ../../e_os.h ../../include/openssl/asn1.h
-bio_enc.o: ../../include/openssl/bio.h ../../include/openssl/buffer.h
-bio_enc.o: ../../include/openssl/crypto.h ../../include/openssl/e_os2.h
-bio_enc.o: ../../include/openssl/err.h ../../include/openssl/evp.h
-bio_enc.o: ../../include/openssl/lhash.h ../../include/openssl/obj_mac.h
-bio_enc.o: ../../include/openssl/objects.h ../../include/openssl/opensslconf.h
-bio_enc.o: ../../include/openssl/opensslv.h ../../include/openssl/ossl_typ.h
-bio_enc.o: ../../include/openssl/safestack.h ../../include/openssl/stack.h
-bio_enc.o: ../../include/openssl/symhacks.h ../cryptlib.h bio_enc.c
-bio_md.o: ../../e_os.h ../../include/openssl/asn1.h ../../include/openssl/bio.h
-bio_md.o: ../../include/openssl/buffer.h ../../include/openssl/crypto.h
-bio_md.o: ../../include/openssl/e_os2.h ../../include/openssl/err.h
-bio_md.o: ../../include/openssl/evp.h ../../include/openssl/lhash.h
-bio_md.o: ../../include/openssl/obj_mac.h ../../include/openssl/objects.h
-bio_md.o: ../../include/openssl/opensslconf.h ../../include/openssl/opensslv.h
-bio_md.o: ../../include/openssl/ossl_typ.h ../../include/openssl/safestack.h
-bio_md.o: ../../include/openssl/stack.h ../../include/openssl/symhacks.h
-bio_md.o: ../cryptlib.h bio_md.c
-bio_ok.o: ../../e_os.h ../../include/openssl/asn1.h ../../include/openssl/bio.h
-bio_ok.o: ../../include/openssl/buffer.h ../../include/openssl/crypto.h
-bio_ok.o: ../../include/openssl/e_os2.h ../../include/openssl/err.h
-bio_ok.o: ../../include/openssl/evp.h ../../include/openssl/lhash.h
-bio_ok.o: ../../include/openssl/obj_mac.h ../../include/openssl/objects.h
-bio_ok.o: ../../include/openssl/opensslconf.h ../../include/openssl/opensslv.h
-bio_ok.o: ../../include/openssl/ossl_typ.h ../../include/openssl/rand.h
-bio_ok.o: ../../include/openssl/safestack.h ../../include/openssl/stack.h
-bio_ok.o: ../../include/openssl/symhacks.h ../cryptlib.h bio_ok.c
-c_all.o: ../../e_os.h ../../include/openssl/asn1.h ../../include/openssl/bio.h
-c_all.o: ../../include/openssl/buffer.h ../../include/openssl/crypto.h
-c_all.o: ../../include/openssl/e_os2.h ../../include/openssl/engine.h
-c_all.o: ../../include/openssl/err.h ../../include/openssl/evp.h
-c_all.o: ../../include/openssl/lhash.h ../../include/openssl/obj_mac.h
-c_all.o: ../../include/openssl/objects.h ../../include/openssl/opensslconf.h
-c_all.o: ../../include/openssl/opensslv.h ../../include/openssl/ossl_typ.h
-c_all.o: ../../include/openssl/safestack.h ../../include/openssl/stack.h
-c_all.o: ../../include/openssl/symhacks.h ../cryptlib.h c_all.c
-c_allc.o: ../../e_os.h ../../include/openssl/asn1.h ../../include/openssl/bio.h
-c_allc.o: ../../include/openssl/buffer.h ../../include/openssl/crypto.h
-c_allc.o: ../../include/openssl/e_os2.h ../../include/openssl/ec.h
-c_allc.o: ../../include/openssl/ecdh.h ../../include/openssl/ecdsa.h
-c_allc.o: ../../include/openssl/err.h ../../include/openssl/evp.h
-c_allc.o: ../../include/openssl/lhash.h ../../include/openssl/obj_mac.h
-c_allc.o: ../../include/openssl/objects.h ../../include/openssl/opensslconf.h
-c_allc.o: ../../include/openssl/opensslv.h ../../include/openssl/ossl_typ.h
-c_allc.o: ../../include/openssl/pkcs12.h ../../include/openssl/pkcs7.h
-c_allc.o: ../../include/openssl/safestack.h ../../include/openssl/sha.h
-c_allc.o: ../../include/openssl/stack.h ../../include/openssl/symhacks.h
-c_allc.o: ../../include/openssl/x509.h ../../include/openssl/x509_vfy.h
-c_allc.o: ../cryptlib.h c_allc.c
-c_alld.o: ../../e_os.h ../../include/openssl/asn1.h ../../include/openssl/bio.h
-c_alld.o: ../../include/openssl/buffer.h ../../include/openssl/crypto.h
-c_alld.o: ../../include/openssl/e_os2.h ../../include/openssl/ec.h
-c_alld.o: ../../include/openssl/ecdh.h ../../include/openssl/ecdsa.h
-c_alld.o: ../../include/openssl/err.h ../../include/openssl/evp.h
-c_alld.o: ../../include/openssl/lhash.h ../../include/openssl/obj_mac.h
-c_alld.o: ../../include/openssl/objects.h ../../include/openssl/opensslconf.h
-c_alld.o: ../../include/openssl/opensslv.h ../../include/openssl/ossl_typ.h
-c_alld.o: ../../include/openssl/pkcs12.h ../../include/openssl/pkcs7.h
-c_alld.o: ../../include/openssl/safestack.h ../../include/openssl/sha.h
-c_alld.o: ../../include/openssl/stack.h ../../include/openssl/symhacks.h
-c_alld.o: ../../include/openssl/x509.h ../../include/openssl/x509_vfy.h
-c_alld.o: ../cryptlib.h c_alld.c
-digest.o: ../../e_os.h ../../include/openssl/asn1.h ../../include/openssl/bio.h
-digest.o: ../../include/openssl/buffer.h ../../include/openssl/crypto.h
-digest.o: ../../include/openssl/e_os2.h ../../include/openssl/engine.h
-digest.o: ../../include/openssl/err.h ../../include/openssl/evp.h
-digest.o: ../../include/openssl/lhash.h ../../include/openssl/obj_mac.h
-digest.o: ../../include/openssl/objects.h ../../include/openssl/opensslconf.h
-digest.o: ../../include/openssl/opensslv.h ../../include/openssl/ossl_typ.h
-digest.o: ../../include/openssl/safestack.h ../../include/openssl/stack.h
-digest.o: ../../include/openssl/symhacks.h ../cryptlib.h digest.c
-e_aes.o: ../../include/openssl/aes.h ../../include/openssl/asn1.h
-e_aes.o: ../../include/openssl/bio.h ../../include/openssl/crypto.h
-e_aes.o: ../../include/openssl/e_os2.h ../../include/openssl/err.h
-e_aes.o: ../../include/openssl/evp.h ../../include/openssl/lhash.h
-e_aes.o: ../../include/openssl/obj_mac.h ../../include/openssl/objects.h
-e_aes.o: ../../include/openssl/opensslconf.h ../../include/openssl/opensslv.h
-e_aes.o: ../../include/openssl/ossl_typ.h ../../include/openssl/safestack.h
-e_aes.o: ../../include/openssl/stack.h ../../include/openssl/symhacks.h e_aes.c
-e_aes.o: evp_locl.h
-e_bf.o: ../../e_os.h ../../include/openssl/asn1.h ../../include/openssl/bio.h
-e_bf.o: ../../include/openssl/blowfish.h ../../include/openssl/buffer.h
-e_bf.o: ../../include/openssl/crypto.h ../../include/openssl/e_os2.h
-e_bf.o: ../../include/openssl/err.h ../../include/openssl/evp.h
-e_bf.o: ../../include/openssl/lhash.h ../../include/openssl/obj_mac.h
-e_bf.o: ../../include/openssl/objects.h ../../include/openssl/opensslconf.h
-e_bf.o: ../../include/openssl/opensslv.h ../../include/openssl/ossl_typ.h
-e_bf.o: ../../include/openssl/safestack.h ../../include/openssl/stack.h
-e_bf.o: ../../include/openssl/symhacks.h ../cryptlib.h e_bf.c evp_locl.h
-e_camellia.o: ../../include/openssl/opensslconf.h e_camellia.c
-e_cast.o: ../../e_os.h ../../include/openssl/asn1.h ../../include/openssl/bio.h
-e_cast.o: ../../include/openssl/buffer.h ../../include/openssl/cast.h
-e_cast.o: ../../include/openssl/crypto.h ../../include/openssl/e_os2.h
-e_cast.o: ../../include/openssl/err.h ../../include/openssl/evp.h
-e_cast.o: ../../include/openssl/lhash.h ../../include/openssl/obj_mac.h
-e_cast.o: ../../include/openssl/objects.h ../../include/openssl/opensslconf.h
-e_cast.o: ../../include/openssl/opensslv.h ../../include/openssl/ossl_typ.h
-e_cast.o: ../../include/openssl/safestack.h ../../include/openssl/stack.h
-e_cast.o: ../../include/openssl/symhacks.h ../cryptlib.h e_cast.c evp_locl.h
-e_des.o: ../../e_os.h ../../include/openssl/asn1.h ../../include/openssl/bio.h
-e_des.o: ../../include/openssl/buffer.h ../../include/openssl/crypto.h
-e_des.o: ../../include/openssl/des.h ../../include/openssl/des_old.h
-e_des.o: ../../include/openssl/e_os2.h ../../include/openssl/err.h
-e_des.o: ../../include/openssl/evp.h ../../include/openssl/lhash.h
-e_des.o: ../../include/openssl/obj_mac.h ../../include/openssl/objects.h
-e_des.o: ../../include/openssl/opensslconf.h ../../include/openssl/opensslv.h
-e_des.o: ../../include/openssl/ossl_typ.h ../../include/openssl/rand.h
-e_des.o: ../../include/openssl/safestack.h ../../include/openssl/stack.h
-e_des.o: ../../include/openssl/symhacks.h ../../include/openssl/ui.h
-e_des.o: ../../include/openssl/ui_compat.h ../cryptlib.h e_des.c evp_locl.h
-e_des3.o: ../../e_os.h ../../include/openssl/asn1.h ../../include/openssl/bio.h
-e_des3.o: ../../include/openssl/buffer.h ../../include/openssl/crypto.h
-e_des3.o: ../../include/openssl/des.h ../../include/openssl/des_old.h
-e_des3.o: ../../include/openssl/e_os2.h ../../include/openssl/err.h
-e_des3.o: ../../include/openssl/evp.h ../../include/openssl/lhash.h
-e_des3.o: ../../include/openssl/obj_mac.h ../../include/openssl/objects.h
-e_des3.o: ../../include/openssl/opensslconf.h ../../include/openssl/opensslv.h
-e_des3.o: ../../include/openssl/ossl_typ.h ../../include/openssl/rand.h
-e_des3.o: ../../include/openssl/safestack.h ../../include/openssl/stack.h
-e_des3.o: ../../include/openssl/symhacks.h ../../include/openssl/ui.h
-e_des3.o: ../../include/openssl/ui_compat.h ../cryptlib.h e_des3.c evp_locl.h
-e_idea.o: ../../e_os.h ../../include/openssl/asn1.h ../../include/openssl/bio.h
-e_idea.o: ../../include/openssl/buffer.h ../../include/openssl/crypto.h
-e_idea.o: ../../include/openssl/e_os2.h ../../include/openssl/err.h
-e_idea.o: ../../include/openssl/evp.h ../../include/openssl/idea.h
-e_idea.o: ../../include/openssl/lhash.h ../../include/openssl/obj_mac.h
-e_idea.o: ../../include/openssl/objects.h ../../include/openssl/opensslconf.h
-e_idea.o: ../../include/openssl/opensslv.h ../../include/openssl/ossl_typ.h
-e_idea.o: ../../include/openssl/safestack.h ../../include/openssl/stack.h
-e_idea.o: ../../include/openssl/symhacks.h ../cryptlib.h e_idea.c evp_locl.h
-e_null.o: ../../e_os.h ../../include/openssl/asn1.h ../../include/openssl/bio.h
-e_null.o: ../../include/openssl/buffer.h ../../include/openssl/crypto.h
-e_null.o: ../../include/openssl/e_os2.h ../../include/openssl/err.h
-e_null.o: ../../include/openssl/evp.h ../../include/openssl/lhash.h
-e_null.o: ../../include/openssl/obj_mac.h ../../include/openssl/objects.h
-e_null.o: ../../include/openssl/opensslconf.h ../../include/openssl/opensslv.h
-e_null.o: ../../include/openssl/ossl_typ.h ../../include/openssl/safestack.h
-e_null.o: ../../include/openssl/stack.h ../../include/openssl/symhacks.h
-e_null.o: ../cryptlib.h e_null.c
-e_old.o: e_old.c
-e_rc2.o: ../../e_os.h ../../include/openssl/asn1.h ../../include/openssl/bio.h
-e_rc2.o: ../../include/openssl/buffer.h ../../include/openssl/crypto.h
-e_rc2.o: ../../include/openssl/e_os2.h ../../include/openssl/err.h
-e_rc2.o: ../../include/openssl/evp.h ../../include/openssl/lhash.h
-e_rc2.o: ../../include/openssl/obj_mac.h ../../include/openssl/objects.h
-e_rc2.o: ../../include/openssl/opensslconf.h ../../include/openssl/opensslv.h
-e_rc2.o: ../../include/openssl/ossl_typ.h ../../include/openssl/rc2.h
-e_rc2.o: ../../include/openssl/safestack.h ../../include/openssl/stack.h
-e_rc2.o: ../../include/openssl/symhacks.h ../cryptlib.h e_rc2.c evp_locl.h
-e_rc4.o: ../../e_os.h ../../include/openssl/asn1.h ../../include/openssl/bio.h
-e_rc4.o: ../../include/openssl/buffer.h ../../include/openssl/crypto.h
-e_rc4.o: ../../include/openssl/e_os2.h ../../include/openssl/err.h
-e_rc4.o: ../../include/openssl/evp.h ../../include/openssl/lhash.h
-e_rc4.o: ../../include/openssl/obj_mac.h ../../include/openssl/objects.h
-e_rc4.o: ../../include/openssl/opensslconf.h ../../include/openssl/opensslv.h
-e_rc4.o: ../../include/openssl/ossl_typ.h ../../include/openssl/rc4.h
-e_rc4.o: ../../include/openssl/safestack.h ../../include/openssl/stack.h
-e_rc4.o: ../../include/openssl/symhacks.h ../cryptlib.h e_rc4.c
-e_rc5.o: ../../e_os.h ../../include/openssl/bio.h
-e_rc5.o: ../../include/openssl/buffer.h ../../include/openssl/crypto.h
-e_rc5.o: ../../include/openssl/e_os2.h ../../include/openssl/err.h
-e_rc5.o: ../../include/openssl/lhash.h ../../include/openssl/opensslconf.h
-e_rc5.o: ../../include/openssl/opensslv.h ../../include/openssl/ossl_typ.h
-e_rc5.o: ../../include/openssl/safestack.h ../../include/openssl/stack.h
-e_rc5.o: ../../include/openssl/symhacks.h ../cryptlib.h e_rc5.c
-e_xcbc_d.o: ../../e_os.h ../../include/openssl/asn1.h
-e_xcbc_d.o: ../../include/openssl/bio.h ../../include/openssl/buffer.h
-e_xcbc_d.o: ../../include/openssl/crypto.h ../../include/openssl/des.h
-e_xcbc_d.o: ../../include/openssl/des_old.h ../../include/openssl/e_os2.h
-e_xcbc_d.o: ../../include/openssl/err.h ../../include/openssl/evp.h
-e_xcbc_d.o: ../../include/openssl/lhash.h ../../include/openssl/obj_mac.h
-e_xcbc_d.o: ../../include/openssl/objects.h ../../include/openssl/opensslconf.h
-e_xcbc_d.o: ../../include/openssl/opensslv.h ../../include/openssl/ossl_typ.h
-e_xcbc_d.o: ../../include/openssl/safestack.h ../../include/openssl/stack.h
-e_xcbc_d.o: ../../include/openssl/symhacks.h ../../include/openssl/ui.h
-e_xcbc_d.o: ../../include/openssl/ui_compat.h ../cryptlib.h e_xcbc_d.c
-encode.o: ../../e_os.h ../../include/openssl/asn1.h ../../include/openssl/bio.h
-encode.o: ../../include/openssl/buffer.h ../../include/openssl/crypto.h
-encode.o: ../../include/openssl/e_os2.h ../../include/openssl/err.h
-encode.o: ../../include/openssl/evp.h ../../include/openssl/lhash.h
-encode.o: ../../include/openssl/obj_mac.h ../../include/openssl/objects.h
-encode.o: ../../include/openssl/opensslconf.h ../../include/openssl/opensslv.h
-encode.o: ../../include/openssl/ossl_typ.h ../../include/openssl/safestack.h
-encode.o: ../../include/openssl/stack.h ../../include/openssl/symhacks.h
-encode.o: ../cryptlib.h encode.c
-evp_acnf.o: ../../e_os.h ../../include/openssl/asn1.h
-evp_acnf.o: ../../include/openssl/bio.h ../../include/openssl/buffer.h
-evp_acnf.o: ../../include/openssl/conf.h ../../include/openssl/crypto.h
-evp_acnf.o: ../../include/openssl/e_os2.h ../../include/openssl/err.h
-evp_acnf.o: ../../include/openssl/evp.h ../../include/openssl/lhash.h
-evp_acnf.o: ../../include/openssl/obj_mac.h ../../include/openssl/objects.h
-evp_acnf.o: ../../include/openssl/opensslconf.h
-evp_acnf.o: ../../include/openssl/opensslv.h ../../include/openssl/ossl_typ.h
-evp_acnf.o: ../../include/openssl/safestack.h ../../include/openssl/stack.h
-evp_acnf.o: ../../include/openssl/symhacks.h ../cryptlib.h evp_acnf.c
-evp_enc.o: ../../e_os.h ../../include/openssl/asn1.h
-evp_enc.o: ../../include/openssl/bio.h ../../include/openssl/buffer.h
-evp_enc.o: ../../include/openssl/crypto.h ../../include/openssl/e_os2.h
-evp_enc.o: ../../include/openssl/engine.h ../../include/openssl/err.h
-evp_enc.o: ../../include/openssl/evp.h ../../include/openssl/lhash.h
-evp_enc.o: ../../include/openssl/obj_mac.h ../../include/openssl/objects.h
-evp_enc.o: ../../include/openssl/opensslconf.h ../../include/openssl/opensslv.h
-evp_enc.o: ../../include/openssl/ossl_typ.h ../../include/openssl/rand.h
-evp_enc.o: ../../include/openssl/safestack.h ../../include/openssl/stack.h
-evp_enc.o: ../../include/openssl/symhacks.h ../cryptlib.h evp_enc.c evp_locl.h
-evp_err.o: ../../include/openssl/asn1.h ../../include/openssl/bio.h
-evp_err.o: ../../include/openssl/crypto.h ../../include/openssl/e_os2.h
-evp_err.o: ../../include/openssl/err.h ../../include/openssl/evp.h
-evp_err.o: ../../include/openssl/lhash.h ../../include/openssl/obj_mac.h
-evp_err.o: ../../include/openssl/objects.h ../../include/openssl/opensslconf.h
-evp_err.o: ../../include/openssl/opensslv.h ../../include/openssl/ossl_typ.h
-evp_err.o: ../../include/openssl/safestack.h ../../include/openssl/stack.h
-evp_err.o: ../../include/openssl/symhacks.h evp_err.c
-evp_key.o: ../../e_os.h ../../include/openssl/asn1.h
-evp_key.o: ../../include/openssl/bio.h ../../include/openssl/buffer.h
-evp_key.o: ../../include/openssl/crypto.h ../../include/openssl/e_os2.h
-evp_key.o: ../../include/openssl/ec.h ../../include/openssl/ecdh.h
-evp_key.o: ../../include/openssl/ecdsa.h ../../include/openssl/err.h
-evp_key.o: ../../include/openssl/evp.h ../../include/openssl/lhash.h
-evp_key.o: ../../include/openssl/obj_mac.h ../../include/openssl/objects.h
-evp_key.o: ../../include/openssl/opensslconf.h ../../include/openssl/opensslv.h
-evp_key.o: ../../include/openssl/ossl_typ.h ../../include/openssl/pkcs7.h
-evp_key.o: ../../include/openssl/safestack.h ../../include/openssl/sha.h
-evp_key.o: ../../include/openssl/stack.h ../../include/openssl/symhacks.h
-evp_key.o: ../../include/openssl/ui.h ../../include/openssl/x509.h
-evp_key.o: ../../include/openssl/x509_vfy.h ../cryptlib.h evp_key.c
-evp_lib.o: ../../e_os.h ../../include/openssl/asn1.h
-evp_lib.o: ../../include/openssl/bio.h ../../include/openssl/buffer.h
-evp_lib.o: ../../include/openssl/crypto.h ../../include/openssl/e_os2.h
-evp_lib.o: ../../include/openssl/err.h ../../include/openssl/evp.h
-evp_lib.o: ../../include/openssl/lhash.h ../../include/openssl/obj_mac.h
-evp_lib.o: ../../include/openssl/objects.h ../../include/openssl/opensslconf.h
-evp_lib.o: ../../include/openssl/opensslv.h ../../include/openssl/ossl_typ.h
-evp_lib.o: ../../include/openssl/safestack.h ../../include/openssl/stack.h
-evp_lib.o: ../../include/openssl/symhacks.h ../cryptlib.h evp_lib.c
-evp_pbe.o: ../../e_os.h ../../include/openssl/asn1.h
-evp_pbe.o: ../../include/openssl/bio.h ../../include/openssl/buffer.h
-evp_pbe.o: ../../include/openssl/crypto.h ../../include/openssl/e_os2.h
-evp_pbe.o: ../../include/openssl/ec.h ../../include/openssl/ecdh.h
-evp_pbe.o: ../../include/openssl/ecdsa.h ../../include/openssl/err.h
-evp_pbe.o: ../../include/openssl/evp.h ../../include/openssl/lhash.h
-evp_pbe.o: ../../include/openssl/obj_mac.h ../../include/openssl/objects.h
-evp_pbe.o: ../../include/openssl/opensslconf.h ../../include/openssl/opensslv.h
-evp_pbe.o: ../../include/openssl/ossl_typ.h ../../include/openssl/pkcs7.h
-evp_pbe.o: ../../include/openssl/safestack.h ../../include/openssl/sha.h
-evp_pbe.o: ../../include/openssl/stack.h ../../include/openssl/symhacks.h
-evp_pbe.o: ../../include/openssl/x509.h ../../include/openssl/x509_vfy.h
-evp_pbe.o: ../cryptlib.h evp_pbe.c
-evp_pkey.o: ../../e_os.h ../../include/openssl/asn1.h
-evp_pkey.o: ../../include/openssl/bio.h ../../include/openssl/bn.h
-evp_pkey.o: ../../include/openssl/buffer.h ../../include/openssl/crypto.h
-evp_pkey.o: ../../include/openssl/dsa.h ../../include/openssl/e_os2.h
-evp_pkey.o: ../../include/openssl/ec.h ../../include/openssl/ecdh.h
-evp_pkey.o: ../../include/openssl/ecdsa.h ../../include/openssl/err.h
-evp_pkey.o: ../../include/openssl/evp.h ../../include/openssl/lhash.h
-evp_pkey.o: ../../include/openssl/obj_mac.h ../../include/openssl/objects.h
-evp_pkey.o: ../../include/openssl/opensslconf.h
-evp_pkey.o: ../../include/openssl/opensslv.h ../../include/openssl/ossl_typ.h
-evp_pkey.o: ../../include/openssl/pkcs7.h ../../include/openssl/rand.h
-evp_pkey.o: ../../include/openssl/rsa.h ../../include/openssl/safestack.h
-evp_pkey.o: ../../include/openssl/sha.h ../../include/openssl/stack.h
-evp_pkey.o: ../../include/openssl/symhacks.h ../../include/openssl/x509.h
-evp_pkey.o: ../../include/openssl/x509_vfy.h ../cryptlib.h evp_pkey.c
-m_dss.o: ../../e_os.h ../../include/openssl/asn1.h ../../include/openssl/bio.h
-m_dss.o: ../../include/openssl/buffer.h ../../include/openssl/crypto.h
-m_dss.o: ../../include/openssl/dsa.h ../../include/openssl/e_os2.h
-m_dss.o: ../../include/openssl/ec.h ../../include/openssl/ecdh.h
-m_dss.o: ../../include/openssl/ecdsa.h ../../include/openssl/err.h
-m_dss.o: ../../include/openssl/evp.h ../../include/openssl/lhash.h
-m_dss.o: ../../include/openssl/obj_mac.h ../../include/openssl/objects.h
-m_dss.o: ../../include/openssl/opensslconf.h ../../include/openssl/opensslv.h
-m_dss.o: ../../include/openssl/ossl_typ.h ../../include/openssl/pkcs7.h
-m_dss.o: ../../include/openssl/safestack.h ../../include/openssl/sha.h
-m_dss.o: ../../include/openssl/stack.h ../../include/openssl/symhacks.h
-m_dss.o: ../../include/openssl/x509.h ../../include/openssl/x509_vfy.h
-m_dss.o: ../cryptlib.h m_dss.c
-m_dss1.o: ../../e_os.h ../../include/openssl/asn1.h ../../include/openssl/bio.h
-m_dss1.o: ../../include/openssl/buffer.h ../../include/openssl/crypto.h
-m_dss1.o: ../../include/openssl/dsa.h ../../include/openssl/e_os2.h
-m_dss1.o: ../../include/openssl/ec.h ../../include/openssl/ecdh.h
-m_dss1.o: ../../include/openssl/ecdsa.h ../../include/openssl/err.h
-m_dss1.o: ../../include/openssl/evp.h ../../include/openssl/lhash.h
-m_dss1.o: ../../include/openssl/obj_mac.h ../../include/openssl/objects.h
-m_dss1.o: ../../include/openssl/opensslconf.h ../../include/openssl/opensslv.h
-m_dss1.o: ../../include/openssl/ossl_typ.h ../../include/openssl/pkcs7.h
-m_dss1.o: ../../include/openssl/safestack.h ../../include/openssl/sha.h
-m_dss1.o: ../../include/openssl/stack.h ../../include/openssl/symhacks.h
-m_dss1.o: ../../include/openssl/x509.h ../../include/openssl/x509_vfy.h
-m_dss1.o: ../cryptlib.h m_dss1.c
-m_ecdsa.o: ../../e_os.h ../../include/openssl/asn1.h
-m_ecdsa.o: ../../include/openssl/bio.h ../../include/openssl/buffer.h
-m_ecdsa.o: ../../include/openssl/crypto.h ../../include/openssl/e_os2.h
-m_ecdsa.o: ../../include/openssl/ec.h ../../include/openssl/ecdh.h
-m_ecdsa.o: ../../include/openssl/ecdsa.h ../../include/openssl/err.h
-m_ecdsa.o: ../../include/openssl/evp.h ../../include/openssl/lhash.h
-m_ecdsa.o: ../../include/openssl/obj_mac.h ../../include/openssl/objects.h
-m_ecdsa.o: ../../include/openssl/opensslconf.h ../../include/openssl/opensslv.h
-m_ecdsa.o: ../../include/openssl/ossl_typ.h ../../include/openssl/pkcs7.h
-m_ecdsa.o: ../../include/openssl/safestack.h ../../include/openssl/sha.h
-m_ecdsa.o: ../../include/openssl/stack.h ../../include/openssl/symhacks.h
-m_ecdsa.o: ../../include/openssl/x509.h ../../include/openssl/x509_vfy.h
-m_ecdsa.o: ../cryptlib.h m_ecdsa.c
-m_md2.o: ../../e_os.h ../../include/openssl/asn1.h ../../include/openssl/bio.h
-m_md2.o: ../../include/openssl/buffer.h ../../include/openssl/crypto.h
-m_md2.o: ../../include/openssl/e_os2.h ../../include/openssl/ec.h
-m_md2.o: ../../include/openssl/ecdh.h ../../include/openssl/ecdsa.h
-m_md2.o: ../../include/openssl/err.h ../../include/openssl/evp.h
-m_md2.o: ../../include/openssl/lhash.h ../../include/openssl/md2.h
-m_md2.o: ../../include/openssl/obj_mac.h ../../include/openssl/objects.h
-m_md2.o: ../../include/openssl/opensslconf.h ../../include/openssl/opensslv.h
-m_md2.o: ../../include/openssl/ossl_typ.h ../../include/openssl/pkcs7.h
-m_md2.o: ../../include/openssl/rsa.h ../../include/openssl/safestack.h
-m_md2.o: ../../include/openssl/sha.h ../../include/openssl/stack.h
-m_md2.o: ../../include/openssl/symhacks.h ../../include/openssl/x509.h
-m_md2.o: ../../include/openssl/x509_vfy.h ../cryptlib.h m_md2.c
-m_md4.o: ../../e_os.h ../../include/openssl/asn1.h ../../include/openssl/bio.h
-m_md4.o: ../../include/openssl/buffer.h ../../include/openssl/crypto.h
-m_md4.o: ../../include/openssl/e_os2.h ../../include/openssl/ec.h
-m_md4.o: ../../include/openssl/ecdh.h ../../include/openssl/ecdsa.h
-m_md4.o: ../../include/openssl/err.h ../../include/openssl/evp.h
-m_md4.o: ../../include/openssl/lhash.h ../../include/openssl/md4.h
-m_md4.o: ../../include/openssl/obj_mac.h ../../include/openssl/objects.h
-m_md4.o: ../../include/openssl/opensslconf.h ../../include/openssl/opensslv.h
-m_md4.o: ../../include/openssl/ossl_typ.h ../../include/openssl/pkcs7.h
-m_md4.o: ../../include/openssl/rsa.h ../../include/openssl/safestack.h
-m_md4.o: ../../include/openssl/sha.h ../../include/openssl/stack.h
-m_md4.o: ../../include/openssl/symhacks.h ../../include/openssl/x509.h
-m_md4.o: ../../include/openssl/x509_vfy.h ../cryptlib.h m_md4.c
-m_md5.o: ../../e_os.h ../../include/openssl/asn1.h ../../include/openssl/bio.h
-m_md5.o: ../../include/openssl/buffer.h ../../include/openssl/crypto.h
-m_md5.o: ../../include/openssl/e_os2.h ../../include/openssl/ec.h
-m_md5.o: ../../include/openssl/ecdh.h ../../include/openssl/ecdsa.h
-m_md5.o: ../../include/openssl/err.h ../../include/openssl/evp.h
-m_md5.o: ../../include/openssl/lhash.h ../../include/openssl/md5.h
-m_md5.o: ../../include/openssl/obj_mac.h ../../include/openssl/objects.h
-m_md5.o: ../../include/openssl/opensslconf.h ../../include/openssl/opensslv.h
-m_md5.o: ../../include/openssl/ossl_typ.h ../../include/openssl/pkcs7.h
-m_md5.o: ../../include/openssl/rsa.h ../../include/openssl/safestack.h
-m_md5.o: ../../include/openssl/sha.h ../../include/openssl/stack.h
-m_md5.o: ../../include/openssl/symhacks.h ../../include/openssl/x509.h
-m_md5.o: ../../include/openssl/x509_vfy.h ../cryptlib.h m_md5.c
-m_mdc2.o: ../../e_os.h ../../include/openssl/bio.h
-m_mdc2.o: ../../include/openssl/buffer.h ../../include/openssl/crypto.h
-m_mdc2.o: ../../include/openssl/e_os2.h ../../include/openssl/err.h
-m_mdc2.o: ../../include/openssl/lhash.h ../../include/openssl/opensslconf.h
-m_mdc2.o: ../../include/openssl/opensslv.h ../../include/openssl/ossl_typ.h
-m_mdc2.o: ../../include/openssl/safestack.h ../../include/openssl/stack.h
-m_mdc2.o: ../../include/openssl/symhacks.h ../cryptlib.h m_mdc2.c
-m_null.o: ../../e_os.h ../../include/openssl/asn1.h ../../include/openssl/bio.h
-m_null.o: ../../include/openssl/buffer.h ../../include/openssl/crypto.h
-m_null.o: ../../include/openssl/e_os2.h ../../include/openssl/ec.h
-m_null.o: ../../include/openssl/ecdh.h ../../include/openssl/ecdsa.h
-m_null.o: ../../include/openssl/err.h ../../include/openssl/evp.h
-m_null.o: ../../include/openssl/lhash.h ../../include/openssl/obj_mac.h
-m_null.o: ../../include/openssl/objects.h ../../include/openssl/opensslconf.h
-m_null.o: ../../include/openssl/opensslv.h ../../include/openssl/ossl_typ.h
-m_null.o: ../../include/openssl/pkcs7.h ../../include/openssl/safestack.h
-m_null.o: ../../include/openssl/sha.h ../../include/openssl/stack.h
-m_null.o: ../../include/openssl/symhacks.h ../../include/openssl/x509.h
-m_null.o: ../../include/openssl/x509_vfy.h ../cryptlib.h m_null.c
-m_ripemd.o: ../../e_os.h ../../include/openssl/asn1.h
-m_ripemd.o: ../../include/openssl/bio.h ../../include/openssl/buffer.h
-m_ripemd.o: ../../include/openssl/crypto.h ../../include/openssl/e_os2.h
-m_ripemd.o: ../../include/openssl/ec.h ../../include/openssl/ecdh.h
-m_ripemd.o: ../../include/openssl/ecdsa.h ../../include/openssl/err.h
-m_ripemd.o: ../../include/openssl/evp.h ../../include/openssl/lhash.h
-m_ripemd.o: ../../include/openssl/obj_mac.h ../../include/openssl/objects.h
-m_ripemd.o: ../../include/openssl/opensslconf.h
-m_ripemd.o: ../../include/openssl/opensslv.h ../../include/openssl/ossl_typ.h
-m_ripemd.o: ../../include/openssl/pkcs7.h ../../include/openssl/ripemd.h
-m_ripemd.o: ../../include/openssl/rsa.h ../../include/openssl/safestack.h
-m_ripemd.o: ../../include/openssl/sha.h ../../include/openssl/stack.h
-m_ripemd.o: ../../include/openssl/symhacks.h ../../include/openssl/x509.h
-m_ripemd.o: ../../include/openssl/x509_vfy.h ../cryptlib.h m_ripemd.c
-m_sha.o: ../../e_os.h ../../include/openssl/asn1.h ../../include/openssl/bio.h
-m_sha.o: ../../include/openssl/buffer.h ../../include/openssl/crypto.h
-m_sha.o: ../../include/openssl/e_os2.h ../../include/openssl/ec.h
-m_sha.o: ../../include/openssl/ecdh.h ../../include/openssl/ecdsa.h
-m_sha.o: ../../include/openssl/err.h ../../include/openssl/evp.h
-m_sha.o: ../../include/openssl/lhash.h ../../include/openssl/obj_mac.h
-m_sha.o: ../../include/openssl/objects.h ../../include/openssl/opensslconf.h
-m_sha.o: ../../include/openssl/opensslv.h ../../include/openssl/ossl_typ.h
-m_sha.o: ../../include/openssl/pkcs7.h ../../include/openssl/rsa.h
-m_sha.o: ../../include/openssl/safestack.h ../../include/openssl/sha.h
-m_sha.o: ../../include/openssl/stack.h ../../include/openssl/symhacks.h
-m_sha.o: ../../include/openssl/x509.h ../../include/openssl/x509_vfy.h
-m_sha.o: ../cryptlib.h m_sha.c
-m_sha1.o: ../../e_os.h ../../include/openssl/asn1.h ../../include/openssl/bio.h
-m_sha1.o: ../../include/openssl/buffer.h ../../include/openssl/crypto.h
-m_sha1.o: ../../include/openssl/e_os2.h ../../include/openssl/ec.h
-m_sha1.o: ../../include/openssl/ecdh.h ../../include/openssl/ecdsa.h
-m_sha1.o: ../../include/openssl/err.h ../../include/openssl/evp.h
-m_sha1.o: ../../include/openssl/lhash.h ../../include/openssl/obj_mac.h
-m_sha1.o: ../../include/openssl/objects.h ../../include/openssl/opensslconf.h
-m_sha1.o: ../../include/openssl/opensslv.h ../../include/openssl/ossl_typ.h
-m_sha1.o: ../../include/openssl/pkcs7.h ../../include/openssl/rsa.h
-m_sha1.o: ../../include/openssl/safestack.h ../../include/openssl/sha.h
-m_sha1.o: ../../include/openssl/stack.h ../../include/openssl/symhacks.h
-m_sha1.o: ../../include/openssl/x509.h ../../include/openssl/x509_vfy.h
-m_sha1.o: ../cryptlib.h m_sha1.c
-names.o: ../../e_os.h ../../include/openssl/asn1.h ../../include/openssl/bio.h
-names.o: ../../include/openssl/buffer.h ../../include/openssl/crypto.h
-names.o: ../../include/openssl/e_os2.h ../../include/openssl/ec.h
-names.o: ../../include/openssl/ecdh.h ../../include/openssl/ecdsa.h
-names.o: ../../include/openssl/err.h ../../include/openssl/evp.h
-names.o: ../../include/openssl/lhash.h ../../include/openssl/obj_mac.h
-names.o: ../../include/openssl/objects.h ../../include/openssl/opensslconf.h
-names.o: ../../include/openssl/opensslv.h ../../include/openssl/ossl_typ.h
-names.o: ../../include/openssl/pkcs7.h ../../include/openssl/safestack.h
-names.o: ../../include/openssl/sha.h ../../include/openssl/stack.h
-names.o: ../../include/openssl/symhacks.h ../../include/openssl/x509.h
-names.o: ../../include/openssl/x509_vfy.h ../cryptlib.h names.c
-p5_crpt.o: ../../e_os.h ../../include/openssl/asn1.h
-p5_crpt.o: ../../include/openssl/bio.h ../../include/openssl/buffer.h
-p5_crpt.o: ../../include/openssl/crypto.h ../../include/openssl/e_os2.h
-p5_crpt.o: ../../include/openssl/ec.h ../../include/openssl/ecdh.h
-p5_crpt.o: ../../include/openssl/ecdsa.h ../../include/openssl/err.h
-p5_crpt.o: ../../include/openssl/evp.h ../../include/openssl/lhash.h
-p5_crpt.o: ../../include/openssl/obj_mac.h ../../include/openssl/objects.h
-p5_crpt.o: ../../include/openssl/opensslconf.h ../../include/openssl/opensslv.h
-p5_crpt.o: ../../include/openssl/ossl_typ.h ../../include/openssl/pkcs7.h
-p5_crpt.o: ../../include/openssl/safestack.h ../../include/openssl/sha.h
-p5_crpt.o: ../../include/openssl/stack.h ../../include/openssl/symhacks.h
-p5_crpt.o: ../../include/openssl/x509.h ../../include/openssl/x509_vfy.h
-p5_crpt.o: ../cryptlib.h p5_crpt.c
-p5_crpt2.o: ../../e_os.h ../../include/openssl/asn1.h
-p5_crpt2.o: ../../include/openssl/bio.h ../../include/openssl/buffer.h
-p5_crpt2.o: ../../include/openssl/crypto.h ../../include/openssl/e_os2.h
-p5_crpt2.o: ../../include/openssl/ec.h ../../include/openssl/ecdh.h
-p5_crpt2.o: ../../include/openssl/ecdsa.h ../../include/openssl/err.h
-p5_crpt2.o: ../../include/openssl/evp.h ../../include/openssl/hmac.h
-p5_crpt2.o: ../../include/openssl/lhash.h ../../include/openssl/obj_mac.h
-p5_crpt2.o: ../../include/openssl/objects.h ../../include/openssl/opensslconf.h
-p5_crpt2.o: ../../include/openssl/opensslv.h ../../include/openssl/ossl_typ.h
-p5_crpt2.o: ../../include/openssl/pkcs7.h ../../include/openssl/safestack.h
-p5_crpt2.o: ../../include/openssl/sha.h ../../include/openssl/stack.h
-p5_crpt2.o: ../../include/openssl/symhacks.h ../../include/openssl/x509.h
-p5_crpt2.o: ../../include/openssl/x509_vfy.h ../cryptlib.h p5_crpt2.c
-p_dec.o: ../../e_os.h ../../include/openssl/asn1.h ../../include/openssl/bio.h
-p_dec.o: ../../include/openssl/buffer.h ../../include/openssl/crypto.h
-p_dec.o: ../../include/openssl/e_os2.h ../../include/openssl/ec.h
-p_dec.o: ../../include/openssl/ecdh.h ../../include/openssl/ecdsa.h
-p_dec.o: ../../include/openssl/err.h ../../include/openssl/evp.h
-p_dec.o: ../../include/openssl/lhash.h ../../include/openssl/obj_mac.h
-p_dec.o: ../../include/openssl/objects.h ../../include/openssl/opensslconf.h
-p_dec.o: ../../include/openssl/opensslv.h ../../include/openssl/ossl_typ.h
-p_dec.o: ../../include/openssl/pkcs7.h ../../include/openssl/rand.h
-p_dec.o: ../../include/openssl/rsa.h ../../include/openssl/safestack.h
-p_dec.o: ../../include/openssl/sha.h ../../include/openssl/stack.h
-p_dec.o: ../../include/openssl/symhacks.h ../../include/openssl/x509.h
-p_dec.o: ../../include/openssl/x509_vfy.h ../cryptlib.h p_dec.c
-p_enc.o: ../../e_os.h ../../include/openssl/asn1.h ../../include/openssl/bio.h
-p_enc.o: ../../include/openssl/buffer.h ../../include/openssl/crypto.h
-p_enc.o: ../../include/openssl/e_os2.h ../../include/openssl/ec.h
-p_enc.o: ../../include/openssl/ecdh.h ../../include/openssl/ecdsa.h
-p_enc.o: ../../include/openssl/err.h ../../include/openssl/evp.h
-p_enc.o: ../../include/openssl/lhash.h ../../include/openssl/obj_mac.h
-p_enc.o: ../../include/openssl/objects.h ../../include/openssl/opensslconf.h
-p_enc.o: ../../include/openssl/opensslv.h ../../include/openssl/ossl_typ.h
-p_enc.o: ../../include/openssl/pkcs7.h ../../include/openssl/rand.h
-p_enc.o: ../../include/openssl/rsa.h ../../include/openssl/safestack.h
-p_enc.o: ../../include/openssl/sha.h ../../include/openssl/stack.h
-p_enc.o: ../../include/openssl/symhacks.h ../../include/openssl/x509.h
-p_enc.o: ../../include/openssl/x509_vfy.h ../cryptlib.h p_enc.c
-p_lib.o: ../../e_os.h ../../include/openssl/asn1.h
-p_lib.o: ../../include/openssl/asn1_mac.h ../../include/openssl/bio.h
-p_lib.o: ../../include/openssl/bn.h ../../include/openssl/buffer.h
-p_lib.o: ../../include/openssl/crypto.h ../../include/openssl/dh.h
-p_lib.o: ../../include/openssl/dsa.h ../../include/openssl/e_os2.h
-p_lib.o: ../../include/openssl/ec.h ../../include/openssl/ecdh.h
-p_lib.o: ../../include/openssl/ecdsa.h ../../include/openssl/err.h
-p_lib.o: ../../include/openssl/evp.h ../../include/openssl/lhash.h
-p_lib.o: ../../include/openssl/obj_mac.h ../../include/openssl/objects.h
-p_lib.o: ../../include/openssl/opensslconf.h ../../include/openssl/opensslv.h
-p_lib.o: ../../include/openssl/ossl_typ.h ../../include/openssl/pkcs7.h
-p_lib.o: ../../include/openssl/rsa.h ../../include/openssl/safestack.h
-p_lib.o: ../../include/openssl/sha.h ../../include/openssl/stack.h
-p_lib.o: ../../include/openssl/symhacks.h ../../include/openssl/x509.h
-p_lib.o: ../../include/openssl/x509_vfy.h ../cryptlib.h p_lib.c
-p_open.o: ../../e_os.h ../../include/openssl/asn1.h ../../include/openssl/bio.h
-p_open.o: ../../include/openssl/buffer.h ../../include/openssl/crypto.h
-p_open.o: ../../include/openssl/e_os2.h ../../include/openssl/ec.h
-p_open.o: ../../include/openssl/ecdh.h ../../include/openssl/ecdsa.h
-p_open.o: ../../include/openssl/err.h ../../include/openssl/evp.h
-p_open.o: ../../include/openssl/lhash.h ../../include/openssl/obj_mac.h
-p_open.o: ../../include/openssl/objects.h ../../include/openssl/opensslconf.h
-p_open.o: ../../include/openssl/opensslv.h ../../include/openssl/ossl_typ.h
-p_open.o: ../../include/openssl/pkcs7.h ../../include/openssl/rsa.h
-p_open.o: ../../include/openssl/safestack.h ../../include/openssl/sha.h
-p_open.o: ../../include/openssl/stack.h ../../include/openssl/symhacks.h
-p_open.o: ../../include/openssl/x509.h ../../include/openssl/x509_vfy.h
-p_open.o: ../cryptlib.h p_open.c
-p_seal.o: ../../e_os.h ../../include/openssl/asn1.h ../../include/openssl/bio.h
-p_seal.o: ../../include/openssl/buffer.h ../../include/openssl/crypto.h
-p_seal.o: ../../include/openssl/e_os2.h ../../include/openssl/ec.h
-p_seal.o: ../../include/openssl/ecdh.h ../../include/openssl/ecdsa.h
-p_seal.o: ../../include/openssl/err.h ../../include/openssl/evp.h
-p_seal.o: ../../include/openssl/lhash.h ../../include/openssl/obj_mac.h
-p_seal.o: ../../include/openssl/objects.h ../../include/openssl/opensslconf.h
-p_seal.o: ../../include/openssl/opensslv.h ../../include/openssl/ossl_typ.h
-p_seal.o: ../../include/openssl/pkcs7.h ../../include/openssl/rand.h
-p_seal.o: ../../include/openssl/rsa.h ../../include/openssl/safestack.h
-p_seal.o: ../../include/openssl/sha.h ../../include/openssl/stack.h
-p_seal.o: ../../include/openssl/symhacks.h ../../include/openssl/x509.h
-p_seal.o: ../../include/openssl/x509_vfy.h ../cryptlib.h p_seal.c
-p_sign.o: ../../e_os.h ../../include/openssl/asn1.h ../../include/openssl/bio.h
-p_sign.o: ../../include/openssl/buffer.h ../../include/openssl/crypto.h
-p_sign.o: ../../include/openssl/e_os2.h ../../include/openssl/ec.h
-p_sign.o: ../../include/openssl/ecdh.h ../../include/openssl/ecdsa.h
-p_sign.o: ../../include/openssl/err.h ../../include/openssl/evp.h
-p_sign.o: ../../include/openssl/lhash.h ../../include/openssl/obj_mac.h
-p_sign.o: ../../include/openssl/objects.h ../../include/openssl/opensslconf.h
-p_sign.o: ../../include/openssl/opensslv.h ../../include/openssl/ossl_typ.h
-p_sign.o: ../../include/openssl/pkcs7.h ../../include/openssl/safestack.h
-p_sign.o: ../../include/openssl/sha.h ../../include/openssl/stack.h
-p_sign.o: ../../include/openssl/symhacks.h ../../include/openssl/x509.h
-p_sign.o: ../../include/openssl/x509_vfy.h ../cryptlib.h p_sign.c
-p_verify.o: ../../e_os.h ../../include/openssl/asn1.h
-p_verify.o: ../../include/openssl/bio.h ../../include/openssl/buffer.h
-p_verify.o: ../../include/openssl/crypto.h ../../include/openssl/e_os2.h
-p_verify.o: ../../include/openssl/ec.h ../../include/openssl/ecdh.h
-p_verify.o: ../../include/openssl/ecdsa.h ../../include/openssl/err.h
-p_verify.o: ../../include/openssl/evp.h ../../include/openssl/lhash.h
-p_verify.o: ../../include/openssl/obj_mac.h ../../include/openssl/objects.h
-p_verify.o: ../../include/openssl/opensslconf.h
-p_verify.o: ../../include/openssl/opensslv.h ../../include/openssl/ossl_typ.h
-p_verify.o: ../../include/openssl/pkcs7.h ../../include/openssl/safestack.h
-p_verify.o: ../../include/openssl/sha.h ../../include/openssl/stack.h
-p_verify.o: ../../include/openssl/symhacks.h ../../include/openssl/x509.h
-p_verify.o: ../../include/openssl/x509_vfy.h ../cryptlib.h p_verify.c
diff --git a/crypto/openssl/crypto/evp/bio_b64.c b/crypto/openssl/crypto/evp/bio_b64.c
deleted file mode 100644
index fa5cbc7eb1ff..000000000000
--- a/crypto/openssl/crypto/evp/bio_b64.c
+++ /dev/null
@@ -1,567 +0,0 @@
-/* crypto/evp/bio_b64.c */
-/* Copyright (C) 1995-1998 Eric Young (eay@cryptsoft.com)
- * All rights reserved.
- *
- * This package is an SSL implementation written
- * by Eric Young (eay@cryptsoft.com).
- * The implementation was written so as to conform with Netscapes SSL.
- * 
- * This library is free for commercial and non-commercial use as long as
- * the following conditions are aheared to.  The following conditions
- * apply to all code found in this distribution, be it the RC4, RSA,
- * lhash, DES, etc., code; not just the SSL code.  The SSL documentation
- * included with this distribution is covered by the same copyright terms
- * except that the holder is Tim Hudson (tjh@cryptsoft.com).
- * 
- * Copyright remains Eric Young's, and as such any Copyright notices in
- * the code are not to be removed.
- * If this package is used in a product, Eric Young should be given attribution
- * as the author of the parts of the library used.
- * This can be in the form of a textual message at program startup or
- * in documentation (online or textual) provided with the package.
- * 
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions
- * are met:
- * 1. Redistributions of source code must retain the copyright
- *    notice, this list of conditions and the following disclaimer.
- * 2. Redistributions in binary form must reproduce the above copyright
- *    notice, this list of conditions and the following disclaimer in the
- *    documentation and/or other materials provided with the distribution.
- * 3. All advertising materials mentioning features or use of this software
- *    must display the following acknowledgement:
- *    "This product includes cryptographic software written by
- *     Eric Young (eay@cryptsoft.com)"
- *    The word 'cryptographic' can be left out if the rouines from the library
- *    being used are not cryptographic related :-).
- * 4. If you include any Windows specific code (or a derivative thereof) from 
- *    the apps directory (application code) you must include an acknowledgement:
- *    "This product includes software written by Tim Hudson (tjh@cryptsoft.com)"
- * 
- * THIS SOFTWARE IS PROVIDED BY ERIC YOUNG ``AS IS'' AND
- * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
- * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
- * ARE DISCLAIMED.  IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE
- * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
- * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
- * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
- * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
- * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
- * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
- * SUCH DAMAGE.
- * 
- * The licence and distribution terms for any publically available version or
- * derivative of this code cannot be changed.  i.e. this code cannot simply be
- * copied and put under another distribution licence
- * [including the GNU Public Licence.]
- */
-
-#include <stdio.h>
-#include <errno.h>
-#include "cryptlib.h"
-#include <openssl/buffer.h>
-#include <openssl/evp.h>
-
-static int b64_write(BIO *h, const char *buf, int num);
-static int b64_read(BIO *h, char *buf, int size);
-/*static int b64_puts(BIO *h, const char *str); */
-/*static int b64_gets(BIO *h, char *str, int size); */
-static long b64_ctrl(BIO *h, int cmd, long arg1, void *arg2);
-static int b64_new(BIO *h);
-static int b64_free(BIO *data);
-static long b64_callback_ctrl(BIO *h,int cmd,bio_info_cb *fp);
-#define B64_BLOCK_SIZE	1024
-#define B64_BLOCK_SIZE2	768
-#define B64_NONE	0
-#define B64_ENCODE	1
-#define B64_DECODE	2
-
-typedef struct b64_struct
-	{
-	/*BIO *bio; moved to the BIO structure */
-	int buf_len;
-	int buf_off;
-	int tmp_len;		/* used to find the start when decoding */
-	int tmp_nl;		/* If true, scan until '\n' */
-	int encode;
-	int start;		/* have we started decoding yet? */
-	int cont;		/* <= 0 when finished */
-	EVP_ENCODE_CTX base64;
-	char buf[EVP_ENCODE_LENGTH(B64_BLOCK_SIZE)+10];
-	char tmp[B64_BLOCK_SIZE];
-	} BIO_B64_CTX;
-
-static BIO_METHOD methods_b64=
-	{
-	BIO_TYPE_BASE64,"base64 encoding",
-	b64_write,
-	b64_read,
-	NULL, /* b64_puts, */
-	NULL, /* b64_gets, */
-	b64_ctrl,
-	b64_new,
-	b64_free,
-	b64_callback_ctrl,
-	};
-
-BIO_METHOD *BIO_f_base64(void)
-	{
-	return(&methods_b64);
-	}
-
-static int b64_new(BIO *bi)
-	{
-	BIO_B64_CTX *ctx;
-
-	ctx=(BIO_B64_CTX *)OPENSSL_malloc(sizeof(BIO_B64_CTX));
-	if (ctx == NULL) return(0);
-
-	ctx->buf_len=0;
-	ctx->tmp_len=0;
-	ctx->tmp_nl=0;
-	ctx->buf_off=0;
-	ctx->cont=1;
-	ctx->start=1;
-	ctx->encode=0;
-
-	bi->init=1;
-	bi->ptr=(char *)ctx;
-	bi->flags=0;
-	return(1);
-	}
-
-static int b64_free(BIO *a)
-	{
-	if (a == NULL) return(0);
-	OPENSSL_free(a->ptr);
-	a->ptr=NULL;
-	a->init=0;
-	a->flags=0;
-	return(1);
-	}
-	
-static int b64_read(BIO *b, char *out, int outl)
-	{
-	int ret=0,i,ii,j,k,x,n,num,ret_code=0;
-	BIO_B64_CTX *ctx;
-	unsigned char *p,*q;
-
-	if (out == NULL) return(0);
-	ctx=(BIO_B64_CTX *)b->ptr;
-
-	if ((ctx == NULL) || (b->next_bio == NULL)) return(0);
-
-	if (ctx->encode != B64_DECODE)
-		{
-		ctx->encode=B64_DECODE;
-		ctx->buf_len=0;
-		ctx->buf_off=0;
-		ctx->tmp_len=0;
-		EVP_DecodeInit(&(ctx->base64));
-		}
-
-	/* First check if there are bytes decoded/encoded */
-	if (ctx->buf_len > 0)
-		{
-		i=ctx->buf_len-ctx->buf_off;
-		if (i > outl) i=outl;
-		OPENSSL_assert(ctx->buf_off+i < (int)sizeof(ctx->buf));
-		memcpy(out,&(ctx->buf[ctx->buf_off]),i);
-		ret=i;
-		out+=i;
-		outl-=i;
-		ctx->buf_off+=i;
-		if (ctx->buf_len == ctx->buf_off)
-			{
-			ctx->buf_len=0;
-			ctx->buf_off=0;
-			}
-		}
-
-	/* At this point, we have room of outl bytes and an empty
-	 * buffer, so we should read in some more. */
-
-	ret_code=0;
-	while (outl > 0)
-		{
-
-		if (ctx->cont <= 0)
-			break;
-
-		i=BIO_read(b->next_bio,&(ctx->tmp[ctx->tmp_len]),
-			B64_BLOCK_SIZE-ctx->tmp_len);
-
-		if (i <= 0)
-			{
-			ret_code=i;
-
-			/* Should be continue next time we are called? */
-			if (!BIO_should_retry(b->next_bio))
-				{
-				ctx->cont=i;
-				/* If buffer empty break */
-				if(ctx->tmp_len == 0)
-					break;
-				/* Fall through and process what we have */
-				else
-					i = 0;
-				}
-			/* else we retry and add more data to buffer */
-			else
-				break;
-			}
-		i+=ctx->tmp_len;
-		ctx->tmp_len = i;
-
-		/* We need to scan, a line at a time until we
-		 * have a valid line if we are starting. */
-		if (ctx->start && (BIO_get_flags(b) & BIO_FLAGS_BASE64_NO_NL))
-			{
-			/* ctx->start=1; */
-			ctx->tmp_len=0;
-			}
-		else if (ctx->start)
-			{
-			q=p=(unsigned char *)ctx->tmp;
-			for (j=0; j<i; j++)
-				{
-				if (*(q++) != '\n') continue;
-
-				/* due to a previous very long line,
-				 * we need to keep on scanning for a '\n'
-				 * before we even start looking for
-				 * base64 encoded stuff. */
-				if (ctx->tmp_nl)
-					{
-					p=q;
-					ctx->tmp_nl=0;
-					continue;
-					}
-
-				k=EVP_DecodeUpdate(&(ctx->base64),
-					(unsigned char *)ctx->buf,
-					&num,p,q-p);
-				if ((k <= 0) && (num == 0) && (ctx->start))
-					EVP_DecodeInit(&ctx->base64);
-				else 
-					{
-					if (p != (unsigned char *)
-						&(ctx->tmp[0]))
-						{
-						i-=(p- (unsigned char *)
-							&(ctx->tmp[0]));
-						for (x=0; x < i; x++)
-							ctx->tmp[x]=p[x];
-						}
-					EVP_DecodeInit(&ctx->base64);
-					ctx->start=0;
-					break;
-					}
-				p=q;
-				}
-
-			/* we fell off the end without starting */
-			if (j == i)
-				{
-				/* Is this is one long chunk?, if so, keep on
-				 * reading until a new line. */
-				if (p == (unsigned char *)&(ctx->tmp[0]))
-					{
-					/* Check buffer full */
-					if (i == B64_BLOCK_SIZE)
-						{
-						ctx->tmp_nl=1;
-						ctx->tmp_len=0;
-						}
-					}
-				else if (p != q) /* finished on a '\n' */
-					{
-					n=q-p;
-					for (ii=0; ii<n; ii++)
-						ctx->tmp[ii]=p[ii];
-					ctx->tmp_len=n;
-					}
-				/* else finished on a '\n' */
-				continue;
-				}
-			else
-				ctx->tmp_len=0;
-			}
-		/* If buffer isn't full and we can retry then
-		 * restart to read in more data.
-		 */
-		else if ((i < B64_BLOCK_SIZE) && (ctx->cont > 0))
-			continue;
-
-		if (BIO_get_flags(b) & BIO_FLAGS_BASE64_NO_NL)
-			{
-			int z,jj;
-
-			jj=(i>>2)<<2;
-			z=EVP_DecodeBlock((unsigned char *)ctx->buf,
-				(unsigned char *)ctx->tmp,jj);
-			if (jj > 2)
-				{
-				if (ctx->tmp[jj-1] == '=')
-					{
-					z--;
-					if (ctx->tmp[jj-2] == '=')
-						z--;
-					}
-				}
-			/* z is now number of output bytes and jj is the
-			 * number consumed */
-			if (jj != i)
-				{
-				memcpy((unsigned char *)ctx->tmp,
-					(unsigned char *)&(ctx->tmp[jj]),i-jj);
-				ctx->tmp_len=i-jj;
-				}
-			ctx->buf_len=0;
-			if (z > 0)
-				{
-				ctx->buf_len=z;
-				i=1;
-				}
-			else
-				i=z;
-			}
-		else
-			{
-			i=EVP_DecodeUpdate(&(ctx->base64),
-				(unsigned char *)ctx->buf,&ctx->buf_len,
-				(unsigned char *)ctx->tmp,i);
-			ctx->tmp_len = 0;
-			}
-		ctx->buf_off=0;
-		if (i < 0)
-			{
-			ret_code=0;
-			ctx->buf_len=0;
-			break;
-			}
-
-		if (ctx->buf_len <= outl)
-			i=ctx->buf_len;
-		else
-			i=outl;
-
-		memcpy(out,ctx->buf,i);
-		ret+=i;
-		ctx->buf_off=i;
-		if (ctx->buf_off == ctx->buf_len)
-			{
-			ctx->buf_len=0;
-			ctx->buf_off=0;
-			}
-		outl-=i;
-		out+=i;
-		}
-	BIO_clear_retry_flags(b);
-	BIO_copy_next_retry(b);
-	return((ret == 0)?ret_code:ret);
-	}
-
-static int b64_write(BIO *b, const char *in, int inl)
-	{
-	int ret=inl,n,i;
-	BIO_B64_CTX *ctx;
-
-	ctx=(BIO_B64_CTX *)b->ptr;
-	BIO_clear_retry_flags(b);
-
-	if (ctx->encode != B64_ENCODE)
-		{
-		ctx->encode=B64_ENCODE;
-		ctx->buf_len=0;
-		ctx->buf_off=0;
-		ctx->tmp_len=0;
-		EVP_EncodeInit(&(ctx->base64));
-		}
-
-	n=ctx->buf_len-ctx->buf_off;
-	while (n > 0)
-		{
-		i=BIO_write(b->next_bio,&(ctx->buf[ctx->buf_off]),n);
-		if (i <= 0)
-			{
-			BIO_copy_next_retry(b);
-			return(i);
-			}
-		ctx->buf_off+=i;
-		n-=i;
-		}
-	/* at this point all pending data has been written */
-	ctx->buf_off=0;
-	ctx->buf_len=0;
-
-	if ((in == NULL) || (inl <= 0)) return(0);
-
-	while (inl > 0)
-		{
-		n=(inl > B64_BLOCK_SIZE)?B64_BLOCK_SIZE:inl;
-
-		if (BIO_get_flags(b) & BIO_FLAGS_BASE64_NO_NL)
-			{
-			if (ctx->tmp_len > 0)
-				{
-				n=3-ctx->tmp_len;
-				/* There's a teoretical possibility for this */
-				if (n > inl) 
-					n=inl;
-				memcpy(&(ctx->tmp[ctx->tmp_len]),in,n);
-				ctx->tmp_len+=n;
-				if (ctx->tmp_len < 3)
-					break;
-				ctx->buf_len=EVP_EncodeBlock(
-					(unsigned char *)ctx->buf,
-					(unsigned char *)ctx->tmp,
-					ctx->tmp_len);
-				/* Since we're now done using the temporary
-				   buffer, the length should be 0'd */
-				ctx->tmp_len=0;
-				}
-			else
-				{
-				if (n < 3)
-					{
-					memcpy(&(ctx->tmp[0]),in,n);
-					ctx->tmp_len=n;
-					break;
-					}
-				n-=n%3;
-				ctx->buf_len=EVP_EncodeBlock(
-					(unsigned char *)ctx->buf,
-					(unsigned char *)in,n);
-				}
-			}
-		else
-			{
-			EVP_EncodeUpdate(&(ctx->base64),
-				(unsigned char *)ctx->buf,&ctx->buf_len,
-				(unsigned char *)in,n);
-			}
-		inl-=n;
-		in+=n;
-
-		ctx->buf_off=0;
-		n=ctx->buf_len;
-		while (n > 0)
-			{
-			i=BIO_write(b->next_bio,&(ctx->buf[ctx->buf_off]),n);
-			if (i <= 0)
-				{
-				BIO_copy_next_retry(b);
-				return((ret == 0)?i:ret);
-				}
-			n-=i;
-			ctx->buf_off+=i;
-			}
-		ctx->buf_len=0;
-		ctx->buf_off=0;
-		}
-	return(ret);
-	}
-
-static long b64_ctrl(BIO *b, int cmd, long num, void *ptr)
-	{
-	BIO_B64_CTX *ctx;
-	long ret=1;
-	int i;
-
-	ctx=(BIO_B64_CTX *)b->ptr;
-
-	switch (cmd)
-		{
-	case BIO_CTRL_RESET:
-		ctx->cont=1;
-		ctx->start=1;
-		ctx->encode=B64_NONE;
-		ret=BIO_ctrl(b->next_bio,cmd,num,ptr);
-		break;
-	case BIO_CTRL_EOF:	/* More to read */
-		if (ctx->cont <= 0)
-			ret=1;
-		else
-			ret=BIO_ctrl(b->next_bio,cmd,num,ptr);
-		break;
-	case BIO_CTRL_WPENDING: /* More to write in buffer */
-		ret=ctx->buf_len-ctx->buf_off;
-		if ((ret == 0) && (ctx->encode != B64_NONE)
-			&& (ctx->base64.num != 0))
-			ret=1;
-		else if (ret <= 0)
-			ret=BIO_ctrl(b->next_bio,cmd,num,ptr);
-		break;
-	case BIO_CTRL_PENDING: /* More to read in buffer */
-		ret=ctx->buf_len-ctx->buf_off;
-		if (ret <= 0)
-			ret=BIO_ctrl(b->next_bio,cmd,num,ptr);
-		break;
-	case BIO_CTRL_FLUSH:
-		/* do a final write */
-again:
-		while (ctx->buf_len != ctx->buf_off)
-			{
-			i=b64_write(b,NULL,0);
-			if (i < 0)
-				return i;
-			}
-		if (BIO_get_flags(b) & BIO_FLAGS_BASE64_NO_NL)
-			{
-			if (ctx->tmp_len != 0)
-				{
-				ctx->buf_len=EVP_EncodeBlock(
-					(unsigned char *)ctx->buf,
-					(unsigned char *)ctx->tmp,
-					ctx->tmp_len);
-				ctx->buf_off=0;
-				ctx->tmp_len=0;
-				goto again;
-				}
-			}
-		else if (ctx->encode != B64_NONE && ctx->base64.num != 0)
-			{
-			ctx->buf_off=0;
-			EVP_EncodeFinal(&(ctx->base64),
-				(unsigned char *)ctx->buf,
-				&(ctx->buf_len));
-			/* push out the bytes */
-			goto again;
-			}
-		/* Finally flush the underlying BIO */
-		ret=BIO_ctrl(b->next_bio,cmd,num,ptr);
-		break;
-
-	case BIO_C_DO_STATE_MACHINE:
-		BIO_clear_retry_flags(b);
-		ret=BIO_ctrl(b->next_bio,cmd,num,ptr);
-		BIO_copy_next_retry(b);
-		break;
-
-	case BIO_CTRL_DUP:
-		break;
-	case BIO_CTRL_INFO:
-	case BIO_CTRL_GET:
-	case BIO_CTRL_SET:
-	default:
-		ret=BIO_ctrl(b->next_bio,cmd,num,ptr);
-		break;
-		}
-	return(ret);
-	}
-
-static long b64_callback_ctrl(BIO *b, int cmd, bio_info_cb *fp)
-	{
-	long ret=1;
-
-	if (b->next_bio == NULL) return(0);
-	switch (cmd)
-		{
-	default:
-		ret=BIO_callback_ctrl(b->next_bio,cmd,fp);
-		break;
-		}
-	return(ret);
-	}
-
diff --git a/crypto/openssl/crypto/evp/bio_enc.c b/crypto/openssl/crypto/evp/bio_enc.c
deleted file mode 100644
index f6ac94c6e1bb..000000000000
--- a/crypto/openssl/crypto/evp/bio_enc.c
+++ /dev/null
@@ -1,426 +0,0 @@
-/* crypto/evp/bio_enc.c */
-/* Copyright (C) 1995-1998 Eric Young (eay@cryptsoft.com)
- * All rights reserved.
- *
- * This package is an SSL implementation written
- * by Eric Young (eay@cryptsoft.com).
- * The implementation was written so as to conform with Netscapes SSL.
- * 
- * This library is free for commercial and non-commercial use as long as
- * the following conditions are aheared to.  The following conditions
- * apply to all code found in this distribution, be it the RC4, RSA,
- * lhash, DES, etc., code; not just the SSL code.  The SSL documentation
- * included with this distribution is covered by the same copyright terms
- * except that the holder is Tim Hudson (tjh@cryptsoft.com).
- * 
- * Copyright remains Eric Young's, and as such any Copyright notices in
- * the code are not to be removed.
- * If this package is used in a product, Eric Young should be given attribution
- * as the author of the parts of the library used.
- * This can be in the form of a textual message at program startup or
- * in documentation (online or textual) provided with the package.
- * 
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions
- * are met:
- * 1. Redistributions of source code must retain the copyright
- *    notice, this list of conditions and the following disclaimer.
- * 2. Redistributions in binary form must reproduce the above copyright
- *    notice, this list of conditions and the following disclaimer in the
- *    documentation and/or other materials provided with the distribution.
- * 3. All advertising materials mentioning features or use of this software
- *    must display the following acknowledgement:
- *    "This product includes cryptographic software written by
- *     Eric Young (eay@cryptsoft.com)"
- *    The word 'cryptographic' can be left out if the rouines from the library
- *    being used are not cryptographic related :-).
- * 4. If you include any Windows specific code (or a derivative thereof) from 
- *    the apps directory (application code) you must include an acknowledgement:
- *    "This product includes software written by Tim Hudson (tjh@cryptsoft.com)"
- * 
- * THIS SOFTWARE IS PROVIDED BY ERIC YOUNG ``AS IS'' AND
- * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
- * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
- * ARE DISCLAIMED.  IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE
- * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
- * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
- * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
- * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
- * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
- * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
- * SUCH DAMAGE.
- * 
- * The licence and distribution terms for any publically available version or
- * derivative of this code cannot be changed.  i.e. this code cannot simply be
- * copied and put under another distribution licence
- * [including the GNU Public Licence.]
- */
-
-#include <stdio.h>
-#include <errno.h>
-#include "cryptlib.h"
-#include <openssl/buffer.h>
-#include <openssl/evp.h>
-
-static int enc_write(BIO *h, const char *buf, int num);
-static int enc_read(BIO *h, char *buf, int size);
-/*static int enc_puts(BIO *h, const char *str); */
-/*static int enc_gets(BIO *h, char *str, int size); */
-static long enc_ctrl(BIO *h, int cmd, long arg1, void *arg2);
-static int enc_new(BIO *h);
-static int enc_free(BIO *data);
-static long enc_callback_ctrl(BIO *h, int cmd, bio_info_cb *fps);
-#define ENC_BLOCK_SIZE	(1024*4)
-#define BUF_OFFSET	(EVP_MAX_BLOCK_LENGTH*2)
-
-typedef struct enc_struct
-	{
-	int buf_len;
-	int buf_off;
-	int cont;		/* <= 0 when finished */
-	int finished;
-	int ok;			/* bad decrypt */
-	EVP_CIPHER_CTX cipher;
-	/* buf is larger than ENC_BLOCK_SIZE because EVP_DecryptUpdate
-	 * can return up to a block more data than is presented to it
-	 */
-	char buf[ENC_BLOCK_SIZE+BUF_OFFSET+2];
-	} BIO_ENC_CTX;
-
-static BIO_METHOD methods_enc=
-	{
-	BIO_TYPE_CIPHER,"cipher",
-	enc_write,
-	enc_read,
-	NULL, /* enc_puts, */
-	NULL, /* enc_gets, */
-	enc_ctrl,
-	enc_new,
-	enc_free,
-	enc_callback_ctrl,
-	};
-
-BIO_METHOD *BIO_f_cipher(void)
-	{
-	return(&methods_enc);
-	}
-
-static int enc_new(BIO *bi)
-	{
-	BIO_ENC_CTX *ctx;
-
-	ctx=(BIO_ENC_CTX *)OPENSSL_malloc(sizeof(BIO_ENC_CTX));
-	if (ctx == NULL) return(0);
-	EVP_CIPHER_CTX_init(&ctx->cipher);
-
-	ctx->buf_len=0;
-	ctx->buf_off=0;
-	ctx->cont=1;
-	ctx->finished=0;
-	ctx->ok=1;
-
-	bi->init=0;
-	bi->ptr=(char *)ctx;
-	bi->flags=0;
-	return(1);
-	}
-
-static int enc_free(BIO *a)
-	{
-	BIO_ENC_CTX *b;
-
-	if (a == NULL) return(0);
-	b=(BIO_ENC_CTX *)a->ptr;
-	EVP_CIPHER_CTX_cleanup(&(b->cipher));
-	OPENSSL_cleanse(a->ptr,sizeof(BIO_ENC_CTX));
-	OPENSSL_free(a->ptr);
-	a->ptr=NULL;
-	a->init=0;
-	a->flags=0;
-	return(1);
-	}
-	
-static int enc_read(BIO *b, char *out, int outl)
-	{
-	int ret=0,i;
-	BIO_ENC_CTX *ctx;
-
-	if (out == NULL) return(0);
-	ctx=(BIO_ENC_CTX *)b->ptr;
-
-	if ((ctx == NULL) || (b->next_bio == NULL)) return(0);
-
-	/* First check if there are bytes decoded/encoded */
-	if (ctx->buf_len > 0)
-		{
-		i=ctx->buf_len-ctx->buf_off;
-		if (i > outl) i=outl;
-		memcpy(out,&(ctx->buf[ctx->buf_off]),i);
-		ret=i;
-		out+=i;
-		outl-=i;
-		ctx->buf_off+=i;
-		if (ctx->buf_len == ctx->buf_off)
-			{
-			ctx->buf_len=0;
-			ctx->buf_off=0;
-			}
-		}
-
-	/* At this point, we have room of outl bytes and an empty
-	 * buffer, so we should read in some more. */
-
-	while (outl > 0)
-		{
-		if (ctx->cont <= 0) break;
-
-		/* read in at IV offset, read the EVP_Cipher
-		 * documentation about why */
-		i=BIO_read(b->next_bio,&(ctx->buf[BUF_OFFSET]),ENC_BLOCK_SIZE);
-
-		if (i <= 0)
-			{
-			/* Should be continue next time we are called? */
-			if (!BIO_should_retry(b->next_bio))
-				{
-				ctx->cont=i;
-				i=EVP_CipherFinal_ex(&(ctx->cipher),
-					(unsigned char *)ctx->buf,
-					&(ctx->buf_len));
-				ctx->ok=i;
-				ctx->buf_off=0;
-				}
-			else 
-				{
-				ret=(ret == 0)?i:ret;
-				break;
-				}
-			}
-		else
-			{
-			EVP_CipherUpdate(&(ctx->cipher),
-				(unsigned char *)ctx->buf,&ctx->buf_len,
-				(unsigned char *)&(ctx->buf[BUF_OFFSET]),i);
-			ctx->cont=1;
-			/* Note: it is possible for EVP_CipherUpdate to
-			 * decrypt zero bytes because this is or looks like
-			 * the final block: if this happens we should retry
-			 * and either read more data or decrypt the final
-			 * block
-			 */
-			if(ctx->buf_len == 0) continue;
-			}
-
-		if (ctx->buf_len <= outl)
-			i=ctx->buf_len;
-		else
-			i=outl;
-		if (i <= 0) break;
-		memcpy(out,ctx->buf,i);
-		ret+=i;
-		ctx->buf_off=i;
-		outl-=i;
-		out+=i;
-		}
-
-	BIO_clear_retry_flags(b);
-	BIO_copy_next_retry(b);
-	return((ret == 0)?ctx->cont:ret);
-	}
-
-static int enc_write(BIO *b, const char *in, int inl)
-	{
-	int ret=0,n,i;
-	BIO_ENC_CTX *ctx;
-
-	ctx=(BIO_ENC_CTX *)b->ptr;
-	ret=inl;
-
-	BIO_clear_retry_flags(b);
-	n=ctx->buf_len-ctx->buf_off;
-	while (n > 0)
-		{
-		i=BIO_write(b->next_bio,&(ctx->buf[ctx->buf_off]),n);
-		if (i <= 0)
-			{
-			BIO_copy_next_retry(b);
-			return(i);
-			}
-		ctx->buf_off+=i;
-		n-=i;
-		}
-	/* at this point all pending data has been written */
-
-	if ((in == NULL) || (inl <= 0)) return(0);
-
-	ctx->buf_off=0;
-	while (inl > 0)
-		{
-		n=(inl > ENC_BLOCK_SIZE)?ENC_BLOCK_SIZE:inl;
-		EVP_CipherUpdate(&(ctx->cipher),
-			(unsigned char *)ctx->buf,&ctx->buf_len,
-			(unsigned char *)in,n);
-		inl-=n;
-		in+=n;
-
-		ctx->buf_off=0;
-		n=ctx->buf_len;
-		while (n > 0)
-			{
-			i=BIO_write(b->next_bio,&(ctx->buf[ctx->buf_off]),n);
-			if (i <= 0)
-				{
-				BIO_copy_next_retry(b);
-				return (ret == inl) ? i : ret - inl;
-				}
-			n-=i;
-			ctx->buf_off+=i;
-			}
-		ctx->buf_len=0;
-		ctx->buf_off=0;
-		}
-	BIO_copy_next_retry(b);
-	return(ret);
-	}
-
-static long enc_ctrl(BIO *b, int cmd, long num, void *ptr)
-	{
-	BIO *dbio;
-	BIO_ENC_CTX *ctx,*dctx;
-	long ret=1;
-	int i;
-	EVP_CIPHER_CTX **c_ctx;
-
-	ctx=(BIO_ENC_CTX *)b->ptr;
-
-	switch (cmd)
-		{
-	case BIO_CTRL_RESET:
-		ctx->ok=1;
-		ctx->finished=0;
-		EVP_CipherInit_ex(&(ctx->cipher),NULL,NULL,NULL,NULL,
-			ctx->cipher.encrypt);
-		ret=BIO_ctrl(b->next_bio,cmd,num,ptr);
-		break;
-	case BIO_CTRL_EOF:	/* More to read */
-		if (ctx->cont <= 0)
-			ret=1;
-		else
-			ret=BIO_ctrl(b->next_bio,cmd,num,ptr);
-		break;
-	case BIO_CTRL_WPENDING:
-		ret=ctx->buf_len-ctx->buf_off;
-		if (ret <= 0)
-			ret=BIO_ctrl(b->next_bio,cmd,num,ptr);
-		break;
-	case BIO_CTRL_PENDING: /* More to read in buffer */
-		ret=ctx->buf_len-ctx->buf_off;
-		if (ret <= 0)
-			ret=BIO_ctrl(b->next_bio,cmd,num,ptr);
-		break;
-	case BIO_CTRL_FLUSH:
-		/* do a final write */
-again:
-		while (ctx->buf_len != ctx->buf_off)
-			{
-			i=enc_write(b,NULL,0);
-			if (i < 0)
-				return i;
-			}
-
-		if (!ctx->finished)
-			{
-			ctx->finished=1;
-			ctx->buf_off=0;
-			ret=EVP_CipherFinal_ex(&(ctx->cipher),
-				(unsigned char *)ctx->buf,
-				&(ctx->buf_len));
-			ctx->ok=(int)ret;
-			if (ret <= 0) break;
-
-			/* push out the bytes */
-			goto again;
-			}
-		
-		/* Finally flush the underlying BIO */
-		ret=BIO_ctrl(b->next_bio,cmd,num,ptr);
-		break;
-	case BIO_C_GET_CIPHER_STATUS:
-		ret=(long)ctx->ok;
-		break;
-	case BIO_C_DO_STATE_MACHINE:
-		BIO_clear_retry_flags(b);
-		ret=BIO_ctrl(b->next_bio,cmd,num,ptr);
-		BIO_copy_next_retry(b);
-		break;
-	case BIO_C_GET_CIPHER_CTX:
-		c_ctx=(EVP_CIPHER_CTX **)ptr;
-		(*c_ctx)= &(ctx->cipher);
-		b->init=1;
-		break;
-	case BIO_CTRL_DUP:
-		dbio=(BIO *)ptr;
-		dctx=(BIO_ENC_CTX *)dbio->ptr;
-		memcpy(&(dctx->cipher),&(ctx->cipher),sizeof(ctx->cipher));
-		dbio->init=1;
-		break;
-	default:
-		ret=BIO_ctrl(b->next_bio,cmd,num,ptr);
-		break;
-		}
-	return(ret);
-	}
-
-static long enc_callback_ctrl(BIO *b, int cmd, bio_info_cb *fp)
-	{
-	long ret=1;
-
-	if (b->next_bio == NULL) return(0);
-	switch (cmd)
-		{
-	default:
-		ret=BIO_callback_ctrl(b->next_bio,cmd,fp);
-		break;
-		}
-	return(ret);
-	}
-
-/*
-void BIO_set_cipher_ctx(b,c)
-BIO *b;
-EVP_CIPHER_ctx *c;
-	{
-	if (b == NULL) return;
-
-	if ((b->callback != NULL) &&
-		(b->callback(b,BIO_CB_CTRL,(char *)c,BIO_CTRL_SET,e,0L) <= 0))
-		return;
-
-	b->init=1;
-	ctx=(BIO_ENC_CTX *)b->ptr;
-	memcpy(ctx->cipher,c,sizeof(EVP_CIPHER_CTX));
-	
-	if (b->callback != NULL)
-		b->callback(b,BIO_CB_CTRL,(char *)c,BIO_CTRL_SET,e,1L);
-	}
-*/
-
-void BIO_set_cipher(BIO *b, const EVP_CIPHER *c, const unsigned char *k,
-	     const unsigned char *i, int e)
-	{
-	BIO_ENC_CTX *ctx;
-
-	if (b == NULL) return;
-
-	if ((b->callback != NULL) &&
-		(b->callback(b,BIO_CB_CTRL,(const char *)c,BIO_CTRL_SET,e,0L) <= 0))
-		return;
-
-	b->init=1;
-	ctx=(BIO_ENC_CTX *)b->ptr;
-	EVP_CipherInit_ex(&(ctx->cipher),c,NULL, k,i,e);
-	
-	if (b->callback != NULL)
-		b->callback(b,BIO_CB_CTRL,(const char *)c,BIO_CTRL_SET,e,1L);
-	}
-
diff --git a/crypto/openssl/crypto/evp/bio_md.c b/crypto/openssl/crypto/evp/bio_md.c
deleted file mode 100644
index d648ac6da6ba..000000000000
--- a/crypto/openssl/crypto/evp/bio_md.c
+++ /dev/null
@@ -1,269 +0,0 @@
-/* crypto/evp/bio_md.c */
-/* Copyright (C) 1995-1998 Eric Young (eay@cryptsoft.com)
- * All rights reserved.
- *
- * This package is an SSL implementation written
- * by Eric Young (eay@cryptsoft.com).
- * The implementation was written so as to conform with Netscapes SSL.
- * 
- * This library is free for commercial and non-commercial use as long as
- * the following conditions are aheared to.  The following conditions
- * apply to all code found in this distribution, be it the RC4, RSA,
- * lhash, DES, etc., code; not just the SSL code.  The SSL documentation
- * included with this distribution is covered by the same copyright terms
- * except that the holder is Tim Hudson (tjh@cryptsoft.com).
- * 
- * Copyright remains Eric Young's, and as such any Copyright notices in
- * the code are not to be removed.
- * If this package is used in a product, Eric Young should be given attribution
- * as the author of the parts of the library used.
- * This can be in the form of a textual message at program startup or
- * in documentation (online or textual) provided with the package.
- * 
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions
- * are met:
- * 1. Redistributions of source code must retain the copyright
- *    notice, this list of conditions and the following disclaimer.
- * 2. Redistributions in binary form must reproduce the above copyright
- *    notice, this list of conditions and the following disclaimer in the
- *    documentation and/or other materials provided with the distribution.
- * 3. All advertising materials mentioning features or use of this software
- *    must display the following acknowledgement:
- *    "This product includes cryptographic software written by
- *     Eric Young (eay@cryptsoft.com)"
- *    The word 'cryptographic' can be left out if the rouines from the library
- *    being used are not cryptographic related :-).
- * 4. If you include any Windows specific code (or a derivative thereof) from 
- *    the apps directory (application code) you must include an acknowledgement:
- *    "This product includes software written by Tim Hudson (tjh@cryptsoft.com)"
- * 
- * THIS SOFTWARE IS PROVIDED BY ERIC YOUNG ``AS IS'' AND
- * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
- * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
- * ARE DISCLAIMED.  IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE
- * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
- * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
- * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
- * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
- * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
- * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
- * SUCH DAMAGE.
- * 
- * The licence and distribution terms for any publically available version or
- * derivative of this code cannot be changed.  i.e. this code cannot simply be
- * copied and put under another distribution licence
- * [including the GNU Public Licence.]
- */
-
-#include <stdio.h>
-#include <errno.h>
-#include "cryptlib.h"
-#include <openssl/buffer.h>
-#include <openssl/evp.h>
-
-/* BIO_put and BIO_get both add to the digest,
- * BIO_gets returns the digest */
-
-static int md_write(BIO *h, char const *buf, int num);
-static int md_read(BIO *h, char *buf, int size);
-/*static int md_puts(BIO *h, const char *str); */
-static int md_gets(BIO *h, char *str, int size);
-static long md_ctrl(BIO *h, int cmd, long arg1, void *arg2);
-static int md_new(BIO *h);
-static int md_free(BIO *data);
-static long md_callback_ctrl(BIO *h,int cmd,bio_info_cb *fp);
-
-static BIO_METHOD methods_md=
-	{
-	BIO_TYPE_MD,"message digest",
-	md_write,
-	md_read,
-	NULL, /* md_puts, */
-	md_gets,
-	md_ctrl,
-	md_new,
-	md_free,
-	md_callback_ctrl,
-	};
-
-BIO_METHOD *BIO_f_md(void)
-	{
-	return(&methods_md);
-	}
-
-static int md_new(BIO *bi)
-	{
-	EVP_MD_CTX *ctx;
-
-	ctx=EVP_MD_CTX_create();
-	if (ctx == NULL) return(0);
-
-	bi->init=0;
-	bi->ptr=(char *)ctx;
-	bi->flags=0;
-	return(1);
-	}
-
-static int md_free(BIO *a)
-	{
-	if (a == NULL) return(0);
-	EVP_MD_CTX_destroy(a->ptr);
-	a->ptr=NULL;
-	a->init=0;
-	a->flags=0;
-	return(1);
-	}
-	
-static int md_read(BIO *b, char *out, int outl)
-	{
-	int ret=0;
-	EVP_MD_CTX *ctx;
-
-	if (out == NULL) return(0);
-	ctx=b->ptr;
-
-	if ((ctx == NULL) || (b->next_bio == NULL)) return(0);
-
-	ret=BIO_read(b->next_bio,out,outl);
-	if (b->init)
-		{
-		if (ret > 0)
-			{
-			EVP_DigestUpdate(ctx,(unsigned char *)out,
-				(unsigned int)ret);
-			}
-		}
-	BIO_clear_retry_flags(b);
-	BIO_copy_next_retry(b);
-	return(ret);
-	}
-
-static int md_write(BIO *b, const char *in, int inl)
-	{
-	int ret=0;
-	EVP_MD_CTX *ctx;
-
-	if ((in == NULL) || (inl <= 0)) return(0);
-	ctx=b->ptr;
-
-	if ((ctx != NULL) && (b->next_bio != NULL))
-		ret=BIO_write(b->next_bio,in,inl);
-	if (b->init)
-		{
-		if (ret > 0)
-			{
-			EVP_DigestUpdate(ctx,(const unsigned char *)in,
-				(unsigned int)ret);
-			}
-		}
-	BIO_clear_retry_flags(b);
-	BIO_copy_next_retry(b);
-	return(ret);
-	}
-
-static long md_ctrl(BIO *b, int cmd, long num, void *ptr)
-	{
-	EVP_MD_CTX *ctx,*dctx,**pctx;
-	const EVP_MD **ppmd;
-	EVP_MD *md;
-	long ret=1;
-	BIO *dbio;
-
-	ctx=b->ptr;
-
-	switch (cmd)
-		{
-	case BIO_CTRL_RESET:
-		if (b->init)
-			ret = EVP_DigestInit_ex(ctx,ctx->digest, NULL);
-		else
-			ret=0;
-		if (ret > 0)
-			ret=BIO_ctrl(b->next_bio,cmd,num,ptr);
-		break;
-	case BIO_C_GET_MD:
-		if (b->init)
-			{
-			ppmd=ptr;
-			*ppmd=ctx->digest;
-			}
-		else
-			ret=0;
-		break;
-	case BIO_C_GET_MD_CTX:
-		if (b->init)
-			{
-			pctx=ptr;
-			*pctx=ctx;
-			}
-		else
-			ret=0;
-		break;
-	case BIO_C_SET_MD_CTX:
-		if (b->init)
-			b->ptr=ptr;
-		else
-			ret=0;
-		break;
-	case BIO_C_DO_STATE_MACHINE:
-		BIO_clear_retry_flags(b);
-		ret=BIO_ctrl(b->next_bio,cmd,num,ptr);
-		BIO_copy_next_retry(b);
-		break;
-
-	case BIO_C_SET_MD:
-		md=ptr;
-		ret = EVP_DigestInit_ex(ctx,md, NULL);
-		if (ret > 0)
-			b->init=1;
-		break;
-	case BIO_CTRL_DUP:
-		dbio=ptr;
-		dctx=dbio->ptr;
-		EVP_MD_CTX_copy_ex(dctx,ctx);
-		b->init=1;
-		break;
-	default:
-		ret=BIO_ctrl(b->next_bio,cmd,num,ptr);
-		break;
-		}
-	return(ret);
-	}
-
-static long md_callback_ctrl(BIO *b, int cmd, bio_info_cb *fp)
-	{
-	long ret=1;
-
-	if (b->next_bio == NULL) return(0);
-	switch (cmd)
-		{
-	default:
-		ret=BIO_callback_ctrl(b->next_bio,cmd,fp);
-		break;
-		}
-	return(ret);
-	}
-
-static int md_gets(BIO *bp, char *buf, int size)
-	{
-	EVP_MD_CTX *ctx;
-	unsigned int ret;
-
-
-	ctx=bp->ptr;
-	if (size < ctx->digest->md_size)
-		return(0);
-	EVP_DigestFinal_ex(ctx,(unsigned char *)buf,&ret);
-	return((int)ret);
-	}
-
-/*
-static int md_puts(bp,str)
-BIO *bp;
-char *str;
-	{
-	return(-1);
-	}
-*/
-
diff --git a/crypto/openssl/crypto/evp/bio_ok.c b/crypto/openssl/crypto/evp/bio_ok.c
deleted file mode 100644
index 98bc1ab40963..000000000000
--- a/crypto/openssl/crypto/evp/bio_ok.c
+++ /dev/null
@@ -1,575 +0,0 @@
-/* crypto/evp/bio_ok.c */
-/* Copyright (C) 1995-1998 Eric Young (eay@cryptsoft.com)
- * All rights reserved.
- *
- * This package is an SSL implementation written
- * by Eric Young (eay@cryptsoft.com).
- * The implementation was written so as to conform with Netscapes SSL.
- * 
- * This library is free for commercial and non-commercial use as long as
- * the following conditions are aheared to.  The following conditions
- * apply to all code found in this distribution, be it the RC4, RSA,
- * lhash, DES, etc., code; not just the SSL code.  The SSL documentation
- * included with this distribution is covered by the same copyright terms
- * except that the holder is Tim Hudson (tjh@cryptsoft.com).
- * 
- * Copyright remains Eric Young's, and as such any Copyright notices in
- * the code are not to be removed.
- * If this package is used in a product, Eric Young should be given attribution
- * as the author of the parts of the library used.
- * This can be in the form of a textual message at program startup or
- * in documentation (online or textual) provided with the package.
- * 
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions
- * are met:
- * 1. Redistributions of source code must retain the copyright
- *    notice, this list of conditions and the following disclaimer.
- * 2. Redistributions in binary form must reproduce the above copyright
- *    notice, this list of conditions and the following disclaimer in the
- *    documentation and/or other materials provided with the distribution.
- * 3. All advertising materials mentioning features or use of this software
- *    must display the following acknowledgement:
- *    "This product includes cryptographic software written by
- *     Eric Young (eay@cryptsoft.com)"
- *    The word 'cryptographic' can be left out if the rouines from the library
- *    being used are not cryptographic related :-).
- * 4. If you include any Windows specific code (or a derivative thereof) from 
- *    the apps directory (application code) you must include an acknowledgement:
- *    "This product includes software written by Tim Hudson (tjh@cryptsoft.com)"
- * 
- * THIS SOFTWARE IS PROVIDED BY ERIC YOUNG ``AS IS'' AND
- * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
- * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
- * ARE DISCLAIMED.  IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE
- * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
- * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
- * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
- * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
- * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
- * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
- * SUCH DAMAGE.
- * 
- * The licence and distribution terms for any publically available version or
- * derivative of this code cannot be changed.  i.e. this code cannot simply be
- * copied and put under another distribution licence
- * [including the GNU Public Licence.]
- */
-
-/*
-	From: Arne Ansper <arne@cyber.ee>
-
-	Why BIO_f_reliable?
-
-	I wrote function which took BIO* as argument, read data from it
-	and processed it. Then I wanted to store the input file in 
-	encrypted form. OK I pushed BIO_f_cipher to the BIO stack
-	and everything was OK. BUT if user types wrong password 
-	BIO_f_cipher outputs only garbage and my function crashes. Yes
-	I can and I should fix my function, but BIO_f_cipher is 
-	easy way to add encryption support to many existing applications
-	and it's hard to debug and fix them all. 
-
-	So I wanted another BIO which would catch the incorrect passwords and
-	file damages which cause garbage on BIO_f_cipher's output. 
-
-	The easy way is to push the BIO_f_md and save the checksum at 
-	the end of the file. However there are several problems with this
-	approach:
-
-	1) you must somehow separate checksum from actual data. 
-	2) you need lot's of memory when reading the file, because you 
-	must read to the end of the file and verify the checksum before
-	letting the application to read the data. 
-	
-	BIO_f_reliable tries to solve both problems, so that you can 
-	read and write arbitrary long streams using only fixed amount
-	of memory.
-
-	BIO_f_reliable splits data stream into blocks. Each block is prefixed
-	with it's length and suffixed with it's digest. So you need only 
-	several Kbytes of memory to buffer single block before verifying 
-	it's digest. 
-
-	BIO_f_reliable goes further and adds several important capabilities:
-
-	1) the digest of the block is computed over the whole stream 
-	-- so nobody can rearrange the blocks or remove or replace them.
-
-	2) to detect invalid passwords right at the start BIO_f_reliable 
-	adds special prefix to the stream. In order to avoid known plain-text
-	attacks this prefix is generated as follows:
-
-		*) digest is initialized with random seed instead of 
-		standardized one.
-		*) same seed is written to output
-		*) well-known text is then hashed and the output 
-		of the digest is also written to output.
-
-	reader can now read the seed from stream, hash the same string
-	and then compare the digest output.
-
-	Bad things: BIO_f_reliable knows what's going on in EVP_Digest. I 
-	initially wrote and tested this code on x86 machine and wrote the
-	digests out in machine-dependent order :( There are people using
-	this code and I cannot change this easily without making existing
-	data files unreadable.
-
-*/
-
-#include <stdio.h>
-#include <errno.h>
-#include <assert.h>
-#include "cryptlib.h"
-#include <openssl/buffer.h>
-#include <openssl/bio.h>
-#include <openssl/evp.h>
-#include <openssl/rand.h>
-
-static int ok_write(BIO *h, const char *buf, int num);
-static int ok_read(BIO *h, char *buf, int size);
-static long ok_ctrl(BIO *h, int cmd, long arg1, void *arg2);
-static int ok_new(BIO *h);
-static int ok_free(BIO *data);
-static long ok_callback_ctrl(BIO *h, int cmd, bio_info_cb *fp);
-
-static void sig_out(BIO* b);
-static void sig_in(BIO* b);
-static void block_out(BIO* b);
-static void block_in(BIO* b);
-#define OK_BLOCK_SIZE	(1024*4)
-#define OK_BLOCK_BLOCK	4
-#define IOBS		(OK_BLOCK_SIZE+ OK_BLOCK_BLOCK+ 3*EVP_MAX_MD_SIZE)
-#define WELLKNOWN "The quick brown fox jumped over the lazy dog's back."
-
-typedef struct ok_struct
-	{
-	size_t buf_len;
-	size_t buf_off;
-	size_t buf_len_save;
-	size_t buf_off_save;
-	int cont;		/* <= 0 when finished */
-	int finished;
-	EVP_MD_CTX md;
-	int blockout;		/* output block is ready */ 
-	int sigio;		/* must process signature */
-	unsigned char buf[IOBS];
-	} BIO_OK_CTX;
-
-static BIO_METHOD methods_ok=
-	{
-	BIO_TYPE_CIPHER,"reliable",
-	ok_write,
-	ok_read,
-	NULL, /* ok_puts, */
-	NULL, /* ok_gets, */
-	ok_ctrl,
-	ok_new,
-	ok_free,
-	ok_callback_ctrl,
-	};
-
-BIO_METHOD *BIO_f_reliable(void)
-	{
-	return(&methods_ok);
-	}
-
-static int ok_new(BIO *bi)
-	{
-	BIO_OK_CTX *ctx;
-
-	ctx=(BIO_OK_CTX *)OPENSSL_malloc(sizeof(BIO_OK_CTX));
-	if (ctx == NULL) return(0);
-
-	ctx->buf_len=0;
-	ctx->buf_off=0;
-	ctx->buf_len_save=0;
-	ctx->buf_off_save=0;
-	ctx->cont=1;
-	ctx->finished=0;
-	ctx->blockout= 0;
-	ctx->sigio=1;
-
-	EVP_MD_CTX_init(&ctx->md);
-
-	bi->init=0;
-	bi->ptr=(char *)ctx;
-	bi->flags=0;
-	return(1);
-	}
-
-static int ok_free(BIO *a)
-	{
-	if (a == NULL) return(0);
-	EVP_MD_CTX_cleanup(&((BIO_OK_CTX *)a->ptr)->md);
-	OPENSSL_cleanse(a->ptr,sizeof(BIO_OK_CTX));
-	OPENSSL_free(a->ptr);
-	a->ptr=NULL;
-	a->init=0;
-	a->flags=0;
-	return(1);
-	}
-	
-static int ok_read(BIO *b, char *out, int outl)
-	{
-	int ret=0,i,n;
-	BIO_OK_CTX *ctx;
-
-	if (out == NULL) return(0);
-	ctx=(BIO_OK_CTX *)b->ptr;
-
-	if ((ctx == NULL) || (b->next_bio == NULL) || (b->init == 0)) return(0);
-
-	while(outl > 0)
-		{
-
-		/* copy clean bytes to output buffer */
-		if (ctx->blockout)
-			{
-			i=ctx->buf_len-ctx->buf_off;
-			if (i > outl) i=outl;
-			memcpy(out,&(ctx->buf[ctx->buf_off]),i);
-			ret+=i;
-			out+=i;
-			outl-=i;
-			ctx->buf_off+=i;
-
-			/* all clean bytes are out */
-			if (ctx->buf_len == ctx->buf_off)
-				{
-				ctx->buf_off=0;
-
-				/* copy start of the next block into proper place */
-				if(ctx->buf_len_save- ctx->buf_off_save > 0)
-					{
-					ctx->buf_len= ctx->buf_len_save- ctx->buf_off_save;
-					memmove(ctx->buf, &(ctx->buf[ctx->buf_off_save]),
-							ctx->buf_len);
-					}
-				else
-					{
-					ctx->buf_len=0;
-					}
-				ctx->blockout= 0;
-				}
-			}
-	
-		/* output buffer full -- cancel */
-		if (outl == 0) break;
-
-		/* no clean bytes in buffer -- fill it */
-		n=IOBS- ctx->buf_len;
-		i=BIO_read(b->next_bio,&(ctx->buf[ctx->buf_len]),n);
-
-		if (i <= 0) break;	/* nothing new */
-
-		ctx->buf_len+= i;
-
-		/* no signature yet -- check if we got one */
-		if (ctx->sigio == 1) sig_in(b);
-
-		/* signature ok -- check if we got block */
-		if (ctx->sigio == 0) block_in(b);
-
-		/* invalid block -- cancel */
-		if (ctx->cont <= 0) break;
-
-		}
-
-	BIO_clear_retry_flags(b);
-	BIO_copy_next_retry(b);
-	return(ret);
-	}
-
-static int ok_write(BIO *b, const char *in, int inl)
-	{
-	int ret=0,n,i;
-	BIO_OK_CTX *ctx;
-
-	if (inl <= 0) return inl;
-
-	ctx=(BIO_OK_CTX *)b->ptr;
-	ret=inl;
-
-	if ((ctx == NULL) || (b->next_bio == NULL) || (b->init == 0)) return(0);
-
-	if(ctx->sigio) sig_out(b);
-
-	do{
-		BIO_clear_retry_flags(b);
-		n=ctx->buf_len-ctx->buf_off;
-		while (ctx->blockout && n > 0)
-			{
-			i=BIO_write(b->next_bio,&(ctx->buf[ctx->buf_off]),n);
-			if (i <= 0)
-				{
-				BIO_copy_next_retry(b);
-				if(!BIO_should_retry(b))
-					ctx->cont= 0;
-				return(i);
-				}
-			ctx->buf_off+=i;
-			n-=i;
-			}
-
-		/* at this point all pending data has been written */
-		ctx->blockout= 0;
-		if (ctx->buf_len == ctx->buf_off)
-			{
-			ctx->buf_len=OK_BLOCK_BLOCK;
-			ctx->buf_off=0;
-			}
-	
-		if ((in == NULL) || (inl <= 0)) return(0);
-
-		n= (inl+ ctx->buf_len > OK_BLOCK_SIZE+ OK_BLOCK_BLOCK) ? 
-			(int)(OK_BLOCK_SIZE+OK_BLOCK_BLOCK-ctx->buf_len) : inl;
-
-		memcpy((unsigned char *)(&(ctx->buf[ctx->buf_len])),(unsigned char *)in,n);
-		ctx->buf_len+= n;
-		inl-=n;
-		in+=n;
-
-		if(ctx->buf_len >= OK_BLOCK_SIZE+ OK_BLOCK_BLOCK)
-			{
-			block_out(b);
-			}
-	}while(inl > 0);
-
-	BIO_clear_retry_flags(b);
-	BIO_copy_next_retry(b);
-	return(ret);
-	}
-
-static long ok_ctrl(BIO *b, int cmd, long num, void *ptr)
-	{
-	BIO_OK_CTX *ctx;
-	EVP_MD *md;
-	const EVP_MD **ppmd;
-	long ret=1;
-	int i;
-
-	ctx=b->ptr;
-
-	switch (cmd)
-		{
-	case BIO_CTRL_RESET:
-		ctx->buf_len=0;
-		ctx->buf_off=0;
-		ctx->buf_len_save=0;
-		ctx->buf_off_save=0;
-		ctx->cont=1;
-		ctx->finished=0;
-		ctx->blockout= 0;
-		ctx->sigio=1;
-		ret=BIO_ctrl(b->next_bio,cmd,num,ptr);
-		break;
-	case BIO_CTRL_EOF:	/* More to read */
-		if (ctx->cont <= 0)
-			ret=1;
-		else
-			ret=BIO_ctrl(b->next_bio,cmd,num,ptr);
-		break;
-	case BIO_CTRL_PENDING: /* More to read in buffer */
-	case BIO_CTRL_WPENDING: /* More to read in buffer */
-		ret=ctx->blockout ? ctx->buf_len-ctx->buf_off : 0;
-		if (ret <= 0)
-			ret=BIO_ctrl(b->next_bio,cmd,num,ptr);
-		break;
-	case BIO_CTRL_FLUSH:
-		/* do a final write */
-		if(ctx->blockout == 0)
-			block_out(b);
-
-		while (ctx->blockout)
-			{
-			i=ok_write(b,NULL,0);
-			if (i < 0)
-				{
-				ret=i;
-				break;
-				}
-			}
-
-		ctx->finished=1;
-		ctx->buf_off=ctx->buf_len=0;
-		ctx->cont=(int)ret;
-		
-		/* Finally flush the underlying BIO */
-		ret=BIO_ctrl(b->next_bio,cmd,num,ptr);
-		break;
-	case BIO_C_DO_STATE_MACHINE:
-		BIO_clear_retry_flags(b);
-		ret=BIO_ctrl(b->next_bio,cmd,num,ptr);
-		BIO_copy_next_retry(b);
-		break;
-	case BIO_CTRL_INFO:
-		ret=(long)ctx->cont;
-		break;
-	case BIO_C_SET_MD:
-		md=ptr;
-		EVP_DigestInit_ex(&ctx->md, md, NULL);
-		b->init=1;
-		break;
-	case BIO_C_GET_MD:
-		if (b->init)
-			{
-			ppmd=ptr;
-			*ppmd=ctx->md.digest;
-			}
-		else
-			ret=0;
-		break;
-	default:
-		ret=BIO_ctrl(b->next_bio,cmd,num,ptr);
-		break;
-		}
-	return(ret);
-	}
-
-static long ok_callback_ctrl(BIO *b, int cmd, bio_info_cb *fp)
-	{
-	long ret=1;
-
-	if (b->next_bio == NULL) return(0);
-	switch (cmd)
-		{
-	default:
-		ret=BIO_callback_ctrl(b->next_bio,cmd,fp);
-		break;
-		}
-	return(ret);
-	}
-
-static void longswap(void *_ptr, size_t len)
-{	const union { long one; char little; } is_endian = {1};
-
-	if (is_endian.little) {
-		size_t i;
-		unsigned char *p=_ptr,c;
-
-		for(i= 0;i < len;i+= 4) {
-			c=p[0],p[0]=p[3],p[3]=c;
-			c=p[1],p[1]=p[2],p[2]=c;
-		}
-	}
-}
-
-static void sig_out(BIO* b)
-	{
-	BIO_OK_CTX *ctx;
-	EVP_MD_CTX *md;
-
-	ctx=b->ptr;
-	md=&ctx->md;
-
-	if(ctx->buf_len+ 2* md->digest->md_size > OK_BLOCK_SIZE) return;
-
-	EVP_DigestInit_ex(md, md->digest, NULL);
-	/* FIXME: there's absolutely no guarantee this makes any sense at all,
-	 * particularly now EVP_MD_CTX has been restructured.
-	 */
-	RAND_pseudo_bytes(md->md_data, md->digest->md_size);
-	memcpy(&(ctx->buf[ctx->buf_len]), md->md_data, md->digest->md_size);
-	longswap(&(ctx->buf[ctx->buf_len]), md->digest->md_size);
-	ctx->buf_len+= md->digest->md_size;
-
-	EVP_DigestUpdate(md, WELLKNOWN, strlen(WELLKNOWN));
-	EVP_DigestFinal_ex(md, &(ctx->buf[ctx->buf_len]), NULL);
-	ctx->buf_len+= md->digest->md_size;
-	ctx->blockout= 1;
-	ctx->sigio= 0;
-	}
-
-static void sig_in(BIO* b)
-	{
-	BIO_OK_CTX *ctx;
-	EVP_MD_CTX *md;
-	unsigned char tmp[EVP_MAX_MD_SIZE];
-	int ret= 0;
-
-	ctx=b->ptr;
-	md=&ctx->md;
-
-	if((int)(ctx->buf_len-ctx->buf_off) < 2*md->digest->md_size) return;
-
-	EVP_DigestInit_ex(md, md->digest, NULL);
-	memcpy(md->md_data, &(ctx->buf[ctx->buf_off]), md->digest->md_size);
-	longswap(md->md_data, md->digest->md_size);
-	ctx->buf_off+= md->digest->md_size;
-
-	EVP_DigestUpdate(md, WELLKNOWN, strlen(WELLKNOWN));
-	EVP_DigestFinal_ex(md, tmp, NULL);
-	ret= memcmp(&(ctx->buf[ctx->buf_off]), tmp, md->digest->md_size) == 0;
-	ctx->buf_off+= md->digest->md_size;
-	if(ret == 1)
-		{
-		ctx->sigio= 0;
-		if(ctx->buf_len != ctx->buf_off)
-			{
-			memmove(ctx->buf, &(ctx->buf[ctx->buf_off]), ctx->buf_len- ctx->buf_off);
-			}
-		ctx->buf_len-= ctx->buf_off;
-		ctx->buf_off= 0;
-		}
-	else
-		{
-		ctx->cont= 0;
-		}
-	}
-
-static void block_out(BIO* b)
-	{
-	BIO_OK_CTX *ctx;
-	EVP_MD_CTX *md;
-	unsigned long tl;
-
-	ctx=b->ptr;
-	md=&ctx->md;
-
-	tl= ctx->buf_len- OK_BLOCK_BLOCK;
-	ctx->buf[0]=(unsigned char)(tl>>24);
-	ctx->buf[1]=(unsigned char)(tl>>16);
-	ctx->buf[2]=(unsigned char)(tl>>8);
-	ctx->buf[3]=(unsigned char)(tl);
-	EVP_DigestUpdate(md, (unsigned char*) &(ctx->buf[OK_BLOCK_BLOCK]), tl);
-	EVP_DigestFinal_ex(md, &(ctx->buf[ctx->buf_len]), NULL);
-	ctx->buf_len+= md->digest->md_size;
-	ctx->blockout= 1;
-	}
-
-static void block_in(BIO* b)
-	{
-	BIO_OK_CTX *ctx;
-	EVP_MD_CTX *md;
-	unsigned long tl= 0;
-	unsigned char tmp[EVP_MAX_MD_SIZE];
-
-	ctx=b->ptr;
-	md=&ctx->md;
-
-	assert(sizeof(tl)>=OK_BLOCK_BLOCK);	/* always true */
-	tl =ctx->buf[0]; tl<<=8;
-	tl|=ctx->buf[1]; tl<<=8;
-	tl|=ctx->buf[2]; tl<<=8;
-	tl|=ctx->buf[3];
-
-	if (ctx->buf_len < tl+ OK_BLOCK_BLOCK+ md->digest->md_size) return;
- 
-	EVP_DigestUpdate(md, (unsigned char*) &(ctx->buf[OK_BLOCK_BLOCK]), tl);
-	EVP_DigestFinal_ex(md, tmp, NULL);
-	if(memcmp(&(ctx->buf[tl+ OK_BLOCK_BLOCK]), tmp, md->digest->md_size) == 0)
-		{
-		/* there might be parts from next block lurking around ! */
-		ctx->buf_off_save= tl+ OK_BLOCK_BLOCK+ md->digest->md_size;
-		ctx->buf_len_save= ctx->buf_len;
-		ctx->buf_off= OK_BLOCK_BLOCK;
-		ctx->buf_len= tl+ OK_BLOCK_BLOCK;
-		ctx->blockout= 1;
-		}
-	else
-		{
-		ctx->cont= 0;
-		}
-	}
-
diff --git a/crypto/openssl/crypto/evp/c_all.c b/crypto/openssl/crypto/evp/c_all.c
deleted file mode 100644
index a5da52e62d8b..000000000000
--- a/crypto/openssl/crypto/evp/c_all.c
+++ /dev/null
@@ -1,90 +0,0 @@
-/* crypto/evp/c_all.c */
-/* Copyright (C) 1995-1998 Eric Young (eay@cryptsoft.com)
- * All rights reserved.
- *
- * This package is an SSL implementation written
- * by Eric Young (eay@cryptsoft.com).
- * The implementation was written so as to conform with Netscapes SSL.
- * 
- * This library is free for commercial and non-commercial use as long as
- * the following conditions are aheared to.  The following conditions
- * apply to all code found in this distribution, be it the RC4, RSA,
- * lhash, DES, etc., code; not just the SSL code.  The SSL documentation
- * included with this distribution is covered by the same copyright terms
- * except that the holder is Tim Hudson (tjh@cryptsoft.com).
- * 
- * Copyright remains Eric Young's, and as such any Copyright notices in
- * the code are not to be removed.
- * If this package is used in a product, Eric Young should be given attribution
- * as the author of the parts of the library used.
- * This can be in the form of a textual message at program startup or
- * in documentation (online or textual) provided with the package.
- * 
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions
- * are met:
- * 1. Redistributions of source code must retain the copyright
- *    notice, this list of conditions and the following disclaimer.
- * 2. Redistributions in binary form must reproduce the above copyright
- *    notice, this list of conditions and the following disclaimer in the
- *    documentation and/or other materials provided with the distribution.
- * 3. All advertising materials mentioning features or use of this software
- *    must display the following acknowledgement:
- *    "This product includes cryptographic software written by
- *     Eric Young (eay@cryptsoft.com)"
- *    The word 'cryptographic' can be left out if the rouines from the library
- *    being used are not cryptographic related :-).
- * 4. If you include any Windows specific code (or a derivative thereof) from 
- *    the apps directory (application code) you must include an acknowledgement:
- *    "This product includes software written by Tim Hudson (tjh@cryptsoft.com)"
- * 
- * THIS SOFTWARE IS PROVIDED BY ERIC YOUNG ``AS IS'' AND
- * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
- * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
- * ARE DISCLAIMED.  IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE
- * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
- * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
- * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
- * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
- * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
- * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
- * SUCH DAMAGE.
- * 
- * The licence and distribution terms for any publically available version or
- * derivative of this code cannot be changed.  i.e. this code cannot simply be
- * copied and put under another distribution licence
- * [including the GNU Public Licence.]
- */
-
-#include <stdio.h>
-#include "cryptlib.h"
-#include <openssl/evp.h>
-#ifndef OPENSSL_NO_ENGINE
-#include <openssl/engine.h>
-#endif
-
-#if 0
-#undef OpenSSL_add_all_algorithms
-
-void OpenSSL_add_all_algorithms(void)
-	{
-	OPENSSL_add_all_algorithms_noconf();
-	}
-#endif
-
-void OPENSSL_add_all_algorithms_noconf(void)
-	{
-	/*
-	 * For the moment OPENSSL_cpuid_setup does something
-	 * only on IA-32, but we reserve the option for all
-	 * platforms...
-	 */
-	OPENSSL_cpuid_setup();
-	OpenSSL_add_all_ciphers();
-	OpenSSL_add_all_digests();
-#ifndef OPENSSL_NO_ENGINE
-# if defined(__OpenBSD__) || defined(__FreeBSD__)
-	ENGINE_setup_bsd_cryptodev();
-# endif
-#endif
-	}
diff --git a/crypto/openssl/crypto/evp/c_allc.c b/crypto/openssl/crypto/evp/c_allc.c
deleted file mode 100644
index 9ba4d0c6e0a4..000000000000
--- a/crypto/openssl/crypto/evp/c_allc.c
+++ /dev/null
@@ -1,216 +0,0 @@
-/* crypto/evp/c_allc.c */
-/* Copyright (C) 1995-1998 Eric Young (eay@cryptsoft.com)
- * All rights reserved.
- *
- * This package is an SSL implementation written
- * by Eric Young (eay@cryptsoft.com).
- * The implementation was written so as to conform with Netscapes SSL.
- * 
- * This library is free for commercial and non-commercial use as long as
- * the following conditions are aheared to.  The following conditions
- * apply to all code found in this distribution, be it the RC4, RSA,
- * lhash, DES, etc., code; not just the SSL code.  The SSL documentation
- * included with this distribution is covered by the same copyright terms
- * except that the holder is Tim Hudson (tjh@cryptsoft.com).
- * 
- * Copyright remains Eric Young's, and as such any Copyright notices in
- * the code are not to be removed.
- * If this package is used in a product, Eric Young should be given attribution
- * as the author of the parts of the library used.
- * This can be in the form of a textual message at program startup or
- * in documentation (online or textual) provided with the package.
- * 
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions
- * are met:
- * 1. Redistributions of source code must retain the copyright
- *    notice, this list of conditions and the following disclaimer.
- * 2. Redistributions in binary form must reproduce the above copyright
- *    notice, this list of conditions and the following disclaimer in the
- *    documentation and/or other materials provided with the distribution.
- * 3. All advertising materials mentioning features or use of this software
- *    must display the following acknowledgement:
- *    "This product includes cryptographic software written by
- *     Eric Young (eay@cryptsoft.com)"
- *    The word 'cryptographic' can be left out if the rouines from the library
- *    being used are not cryptographic related :-).
- * 4. If you include any Windows specific code (or a derivative thereof) from 
- *    the apps directory (application code) you must include an acknowledgement:
- *    "This product includes software written by Tim Hudson (tjh@cryptsoft.com)"
- * 
- * THIS SOFTWARE IS PROVIDED BY ERIC YOUNG ``AS IS'' AND
- * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
- * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
- * ARE DISCLAIMED.  IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE
- * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
- * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
- * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
- * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
- * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
- * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
- * SUCH DAMAGE.
- * 
- * The licence and distribution terms for any publically available version or
- * derivative of this code cannot be changed.  i.e. this code cannot simply be
- * copied and put under another distribution licence
- * [including the GNU Public Licence.]
- */
-
-#include <stdio.h>
-#include "cryptlib.h"
-#include <openssl/evp.h>
-#include <openssl/pkcs12.h>
-#include <openssl/objects.h>
-
-void OpenSSL_add_all_ciphers(void)
-	{
-
-#ifndef OPENSSL_NO_DES
-	EVP_add_cipher(EVP_des_cfb());
-	EVP_add_cipher(EVP_des_cfb1());
-	EVP_add_cipher(EVP_des_cfb8());
-	EVP_add_cipher(EVP_des_ede_cfb());
-	EVP_add_cipher(EVP_des_ede3_cfb());
-
-	EVP_add_cipher(EVP_des_ofb());
-	EVP_add_cipher(EVP_des_ede_ofb());
-	EVP_add_cipher(EVP_des_ede3_ofb());
-
-	EVP_add_cipher(EVP_desx_cbc());
-	EVP_add_cipher_alias(SN_desx_cbc,"DESX");
-	EVP_add_cipher_alias(SN_desx_cbc,"desx");
-
-	EVP_add_cipher(EVP_des_cbc());
-	EVP_add_cipher_alias(SN_des_cbc,"DES");
-	EVP_add_cipher_alias(SN_des_cbc,"des");
-	EVP_add_cipher(EVP_des_ede_cbc());
-	EVP_add_cipher(EVP_des_ede3_cbc());
-	EVP_add_cipher_alias(SN_des_ede3_cbc,"DES3");
-	EVP_add_cipher_alias(SN_des_ede3_cbc,"des3");
-
-	EVP_add_cipher(EVP_des_ecb());
-	EVP_add_cipher(EVP_des_ede());
-	EVP_add_cipher(EVP_des_ede3());
-#endif
-
-#ifndef OPENSSL_NO_RC4
-	EVP_add_cipher(EVP_rc4());
-	EVP_add_cipher(EVP_rc4_40());
-#endif
-
-#ifndef OPENSSL_NO_IDEA
-	EVP_add_cipher(EVP_idea_ecb());
-	EVP_add_cipher(EVP_idea_cfb());
-	EVP_add_cipher(EVP_idea_ofb());
-	EVP_add_cipher(EVP_idea_cbc());
-	EVP_add_cipher_alias(SN_idea_cbc,"IDEA");
-	EVP_add_cipher_alias(SN_idea_cbc,"idea");
-#endif
-
-#ifndef OPENSSL_NO_RC2
-	EVP_add_cipher(EVP_rc2_ecb());
-	EVP_add_cipher(EVP_rc2_cfb());
-	EVP_add_cipher(EVP_rc2_ofb());
-	EVP_add_cipher(EVP_rc2_cbc());
-	EVP_add_cipher(EVP_rc2_40_cbc());
-	EVP_add_cipher(EVP_rc2_64_cbc());
-	EVP_add_cipher_alias(SN_rc2_cbc,"RC2");
-	EVP_add_cipher_alias(SN_rc2_cbc,"rc2");
-#endif
-
-#ifndef OPENSSL_NO_BF
-	EVP_add_cipher(EVP_bf_ecb());
-	EVP_add_cipher(EVP_bf_cfb());
-	EVP_add_cipher(EVP_bf_ofb());
-	EVP_add_cipher(EVP_bf_cbc());
-	EVP_add_cipher_alias(SN_bf_cbc,"BF");
-	EVP_add_cipher_alias(SN_bf_cbc,"bf");
-	EVP_add_cipher_alias(SN_bf_cbc,"blowfish");
-#endif
-
-#ifndef OPENSSL_NO_CAST
-	EVP_add_cipher(EVP_cast5_ecb());
-	EVP_add_cipher(EVP_cast5_cfb());
-	EVP_add_cipher(EVP_cast5_ofb());
-	EVP_add_cipher(EVP_cast5_cbc());
-	EVP_add_cipher_alias(SN_cast5_cbc,"CAST");
-	EVP_add_cipher_alias(SN_cast5_cbc,"cast");
-	EVP_add_cipher_alias(SN_cast5_cbc,"CAST-cbc");
-	EVP_add_cipher_alias(SN_cast5_cbc,"cast-cbc");
-#endif
-
-#ifndef OPENSSL_NO_RC5
-	EVP_add_cipher(EVP_rc5_32_12_16_ecb());
-	EVP_add_cipher(EVP_rc5_32_12_16_cfb());
-	EVP_add_cipher(EVP_rc5_32_12_16_ofb());
-	EVP_add_cipher(EVP_rc5_32_12_16_cbc());
-	EVP_add_cipher_alias(SN_rc5_cbc,"rc5");
-	EVP_add_cipher_alias(SN_rc5_cbc,"RC5");
-#endif
-
-#ifndef OPENSSL_NO_AES
-	EVP_add_cipher(EVP_aes_128_ecb());
-	EVP_add_cipher(EVP_aes_128_cbc());
-	EVP_add_cipher(EVP_aes_128_cfb());
-	EVP_add_cipher(EVP_aes_128_cfb1());
-	EVP_add_cipher(EVP_aes_128_cfb8());
-	EVP_add_cipher(EVP_aes_128_ofb());
-#if 0
-	EVP_add_cipher(EVP_aes_128_ctr());
-#endif
-	EVP_add_cipher_alias(SN_aes_128_cbc,"AES128");
-	EVP_add_cipher_alias(SN_aes_128_cbc,"aes128");
-	EVP_add_cipher(EVP_aes_192_ecb());
-	EVP_add_cipher(EVP_aes_192_cbc());
-	EVP_add_cipher(EVP_aes_192_cfb());
-	EVP_add_cipher(EVP_aes_192_cfb1());
-	EVP_add_cipher(EVP_aes_192_cfb8());
-	EVP_add_cipher(EVP_aes_192_ofb());
-#if 0
-	EVP_add_cipher(EVP_aes_192_ctr());
-#endif
-	EVP_add_cipher_alias(SN_aes_192_cbc,"AES192");
-	EVP_add_cipher_alias(SN_aes_192_cbc,"aes192");
-	EVP_add_cipher(EVP_aes_256_ecb());
-	EVP_add_cipher(EVP_aes_256_cbc());
-	EVP_add_cipher(EVP_aes_256_cfb());
-	EVP_add_cipher(EVP_aes_256_cfb1());
-	EVP_add_cipher(EVP_aes_256_cfb8());
-	EVP_add_cipher(EVP_aes_256_ofb());
-#if 0
-	EVP_add_cipher(EVP_aes_256_ctr());
-#endif
-	EVP_add_cipher_alias(SN_aes_256_cbc,"AES256");
-	EVP_add_cipher_alias(SN_aes_256_cbc,"aes256");
-#endif
-
-#ifndef OPENSSL_NO_CAMELLIA
-	EVP_add_cipher(EVP_camellia_128_ecb());
-	EVP_add_cipher(EVP_camellia_128_cbc());
-	EVP_add_cipher(EVP_camellia_128_cfb());
-	EVP_add_cipher(EVP_camellia_128_cfb1());
-	EVP_add_cipher(EVP_camellia_128_cfb8());
-	EVP_add_cipher(EVP_camellia_128_ofb());
-	EVP_add_cipher_alias(SN_camellia_128_cbc,"CAMELLIA128");
-	EVP_add_cipher_alias(SN_camellia_128_cbc,"camellia128");
-	EVP_add_cipher(EVP_camellia_192_ecb());
-	EVP_add_cipher(EVP_camellia_192_cbc());
-	EVP_add_cipher(EVP_camellia_192_cfb());
-	EVP_add_cipher(EVP_camellia_192_cfb1());
-	EVP_add_cipher(EVP_camellia_192_cfb8());
-	EVP_add_cipher(EVP_camellia_192_ofb());
-	EVP_add_cipher_alias(SN_camellia_192_cbc,"CAMELLIA192");
-	EVP_add_cipher_alias(SN_camellia_192_cbc,"camellia192");
-	EVP_add_cipher(EVP_camellia_256_ecb());
-	EVP_add_cipher(EVP_camellia_256_cbc());
-	EVP_add_cipher(EVP_camellia_256_cfb());
-	EVP_add_cipher(EVP_camellia_256_cfb1());
-	EVP_add_cipher(EVP_camellia_256_cfb8());
-	EVP_add_cipher(EVP_camellia_256_ofb());
-	EVP_add_cipher_alias(SN_camellia_256_cbc,"CAMELLIA256");
-	EVP_add_cipher_alias(SN_camellia_256_cbc,"camellia256");
-#endif
-
-	PKCS12_PBE_add();
-	PKCS5_PBE_add();
-	}
diff --git a/crypto/openssl/crypto/evp/c_alld.c b/crypto/openssl/crypto/evp/c_alld.c
deleted file mode 100644
index d270b0ee0331..000000000000
--- a/crypto/openssl/crypto/evp/c_alld.c
+++ /dev/null
@@ -1,114 +0,0 @@
-/* crypto/evp/c_alld.c */
-/* Copyright (C) 1995-1998 Eric Young (eay@cryptsoft.com)
- * All rights reserved.
- *
- * This package is an SSL implementation written
- * by Eric Young (eay@cryptsoft.com).
- * The implementation was written so as to conform with Netscapes SSL.
- * 
- * This library is free for commercial and non-commercial use as long as
- * the following conditions are aheared to.  The following conditions
- * apply to all code found in this distribution, be it the RC4, RSA,
- * lhash, DES, etc., code; not just the SSL code.  The SSL documentation
- * included with this distribution is covered by the same copyright terms
- * except that the holder is Tim Hudson (tjh@cryptsoft.com).
- * 
- * Copyright remains Eric Young's, and as such any Copyright notices in
- * the code are not to be removed.
- * If this package is used in a product, Eric Young should be given attribution
- * as the author of the parts of the library used.
- * This can be in the form of a textual message at program startup or
- * in documentation (online or textual) provided with the package.
- * 
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions
- * are met:
- * 1. Redistributions of source code must retain the copyright
- *    notice, this list of conditions and the following disclaimer.
- * 2. Redistributions in binary form must reproduce the above copyright
- *    notice, this list of conditions and the following disclaimer in the
- *    documentation and/or other materials provided with the distribution.
- * 3. All advertising materials mentioning features or use of this software
- *    must display the following acknowledgement:
- *    "This product includes cryptographic software written by
- *     Eric Young (eay@cryptsoft.com)"
- *    The word 'cryptographic' can be left out if the rouines from the library
- *    being used are not cryptographic related :-).
- * 4. If you include any Windows specific code (or a derivative thereof) from 
- *    the apps directory (application code) you must include an acknowledgement:
- *    "This product includes software written by Tim Hudson (tjh@cryptsoft.com)"
- * 
- * THIS SOFTWARE IS PROVIDED BY ERIC YOUNG ``AS IS'' AND
- * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
- * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
- * ARE DISCLAIMED.  IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE
- * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
- * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
- * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
- * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
- * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
- * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
- * SUCH DAMAGE.
- * 
- * The licence and distribution terms for any publically available version or
- * derivative of this code cannot be changed.  i.e. this code cannot simply be
- * copied and put under another distribution licence
- * [including the GNU Public Licence.]
- */
-
-#include <stdio.h>
-#include "cryptlib.h"
-#include <openssl/evp.h>
-#include <openssl/pkcs12.h>
-#include <openssl/objects.h>
-
-void OpenSSL_add_all_digests(void)
-	{
-#ifndef OPENSSL_NO_MD2
-	EVP_add_digest(EVP_md2());
-#endif
-#ifndef OPENSSL_NO_MD4
-	EVP_add_digest(EVP_md4());
-#endif
-#ifndef OPENSSL_NO_MD5
-	EVP_add_digest(EVP_md5());
-	EVP_add_digest_alias(SN_md5,"ssl2-md5");
-	EVP_add_digest_alias(SN_md5,"ssl3-md5");
-#endif
-#if !defined(OPENSSL_NO_SHA) && !defined(OPENSSL_NO_SHA0)
-	EVP_add_digest(EVP_sha());
-#ifndef OPENSSL_NO_DSA
-	EVP_add_digest(EVP_dss());
-#endif
-#endif
-#ifndef OPENSSL_NO_SHA
-	EVP_add_digest(EVP_sha1());
-	EVP_add_digest_alias(SN_sha1,"ssl3-sha1");
-	EVP_add_digest_alias(SN_sha1WithRSAEncryption,SN_sha1WithRSA);
-#ifndef OPENSSL_NO_DSA
-	EVP_add_digest(EVP_dss1());
-	EVP_add_digest_alias(SN_dsaWithSHA1,SN_dsaWithSHA1_2);
-	EVP_add_digest_alias(SN_dsaWithSHA1,"DSS1");
-	EVP_add_digest_alias(SN_dsaWithSHA1,"dss1");
-#endif
-#ifndef OPENSSL_NO_ECDSA
-	EVP_add_digest(EVP_ecdsa());
-#endif
-#endif
-#if !defined(OPENSSL_NO_MDC2) && !defined(OPENSSL_NO_DES)
-	EVP_add_digest(EVP_mdc2());
-#endif
-#ifndef OPENSSL_NO_RIPEMD
-	EVP_add_digest(EVP_ripemd160());
-	EVP_add_digest_alias(SN_ripemd160,"ripemd");
-	EVP_add_digest_alias(SN_ripemd160,"rmd160");
-#endif
-#ifndef OPENSSL_NO_SHA256
-	EVP_add_digest(EVP_sha224());
-	EVP_add_digest(EVP_sha256());
-#endif
-#ifndef OPENSSL_NO_SHA512
-	EVP_add_digest(EVP_sha384());
-	EVP_add_digest(EVP_sha512());
-#endif
-	}
diff --git a/crypto/openssl/crypto/evp/digest.c b/crypto/openssl/crypto/evp/digest.c
deleted file mode 100644
index 762e6d3450d3..000000000000
--- a/crypto/openssl/crypto/evp/digest.c
+++ /dev/null
@@ -1,334 +0,0 @@
-/* crypto/evp/digest.c */
-/* Copyright (C) 1995-1998 Eric Young (eay@cryptsoft.com)
- * All rights reserved.
- *
- * This package is an SSL implementation written
- * by Eric Young (eay@cryptsoft.com).
- * The implementation was written so as to conform with Netscapes SSL.
- * 
- * This library is free for commercial and non-commercial use as long as
- * the following conditions are aheared to.  The following conditions
- * apply to all code found in this distribution, be it the RC4, RSA,
- * lhash, DES, etc., code; not just the SSL code.  The SSL documentation
- * included with this distribution is covered by the same copyright terms
- * except that the holder is Tim Hudson (tjh@cryptsoft.com).
- * 
- * Copyright remains Eric Young's, and as such any Copyright notices in
- * the code are not to be removed.
- * If this package is used in a product, Eric Young should be given attribution
- * as the author of the parts of the library used.
- * This can be in the form of a textual message at program startup or
- * in documentation (online or textual) provided with the package.
- * 
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions
- * are met:
- * 1. Redistributions of source code must retain the copyright
- *    notice, this list of conditions and the following disclaimer.
- * 2. Redistributions in binary form must reproduce the above copyright
- *    notice, this list of conditions and the following disclaimer in the
- *    documentation and/or other materials provided with the distribution.
- * 3. All advertising materials mentioning features or use of this software
- *    must display the following acknowledgement:
- *    "This product includes cryptographic software written by
- *     Eric Young (eay@cryptsoft.com)"
- *    The word 'cryptographic' can be left out if the rouines from the library
- *    being used are not cryptographic related :-).
- * 4. If you include any Windows specific code (or a derivative thereof) from 
- *    the apps directory (application code) you must include an acknowledgement:
- *    "This product includes software written by Tim Hudson (tjh@cryptsoft.com)"
- * 
- * THIS SOFTWARE IS PROVIDED BY ERIC YOUNG ``AS IS'' AND
- * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
- * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
- * ARE DISCLAIMED.  IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE
- * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
- * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
- * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
- * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
- * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
- * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
- * SUCH DAMAGE.
- * 
- * The licence and distribution terms for any publically available version or
- * derivative of this code cannot be changed.  i.e. this code cannot simply be
- * copied and put under another distribution licence
- * [including the GNU Public Licence.]
- */
-/* ====================================================================
- * Copyright (c) 1998-2001 The OpenSSL Project.  All rights reserved.
- *
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions
- * are met:
- *
- * 1. Redistributions of source code must retain the above copyright
- *    notice, this list of conditions and the following disclaimer. 
- *
- * 2. Redistributions in binary form must reproduce the above copyright
- *    notice, this list of conditions and the following disclaimer in
- *    the documentation and/or other materials provided with the
- *    distribution.
- *
- * 3. All advertising materials mentioning features or use of this
- *    software must display the following acknowledgment:
- *    "This product includes software developed by the OpenSSL Project
- *    for use in the OpenSSL Toolkit. (http://www.openssl.org/)"
- *
- * 4. The names "OpenSSL Toolkit" and "OpenSSL Project" must not be used to
- *    endorse or promote products derived from this software without
- *    prior written permission. For written permission, please contact
- *    openssl-core@openssl.org.
- *
- * 5. Products derived from this software may not be called "OpenSSL"
- *    nor may "OpenSSL" appear in their names without prior written
- *    permission of the OpenSSL Project.
- *
- * 6. Redistributions of any form whatsoever must retain the following
- *    acknowledgment:
- *    "This product includes software developed by the OpenSSL Project
- *    for use in the OpenSSL Toolkit (http://www.openssl.org/)"
- *
- * THIS SOFTWARE IS PROVIDED BY THE OpenSSL PROJECT ``AS IS'' AND ANY
- * EXPRESSED OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
- * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR
- * PURPOSE ARE DISCLAIMED.  IN NO EVENT SHALL THE OpenSSL PROJECT OR
- * ITS CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
- * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
- * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
- * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
- * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
- * STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
- * ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED
- * OF THE POSSIBILITY OF SUCH DAMAGE.
- * ====================================================================
- *
- * This product includes cryptographic software written by Eric Young
- * (eay@cryptsoft.com).  This product includes software written by Tim
- * Hudson (tjh@cryptsoft.com).
- *
- */
-
-#include <stdio.h>
-#include "cryptlib.h"
-#include <openssl/objects.h>
-#include <openssl/evp.h>
-#ifndef OPENSSL_NO_ENGINE
-#include <openssl/engine.h>
-#endif
-
-void EVP_MD_CTX_init(EVP_MD_CTX *ctx)
-	{
-	memset(ctx,'\0',sizeof *ctx);
-	}
-
-EVP_MD_CTX *EVP_MD_CTX_create(void)
-	{
-	EVP_MD_CTX *ctx=OPENSSL_malloc(sizeof *ctx);
-
-	EVP_MD_CTX_init(ctx);
-
-	return ctx;
-	}
-
-int EVP_DigestInit(EVP_MD_CTX *ctx, const EVP_MD *type)
-	{
-	EVP_MD_CTX_init(ctx);
-	return EVP_DigestInit_ex(ctx, type, NULL);
-	}
-
-int EVP_DigestInit_ex(EVP_MD_CTX *ctx, const EVP_MD *type, ENGINE *impl)
-	{
-	EVP_MD_CTX_clear_flags(ctx,EVP_MD_CTX_FLAG_CLEANED);
-#ifndef OPENSSL_NO_ENGINE
-	/* Whether it's nice or not, "Inits" can be used on "Final"'d contexts
-	 * so this context may already have an ENGINE! Try to avoid releasing
-	 * the previous handle, re-querying for an ENGINE, and having a
-	 * reinitialisation, when it may all be unecessary. */
-	if (ctx->engine && ctx->digest && (!type ||
-			(type && (type->type == ctx->digest->type))))
-		goto skip_to_init;
-	if (type)
-		{
-		/* Ensure an ENGINE left lying around from last time is cleared
-		 * (the previous check attempted to avoid this if the same
-		 * ENGINE and EVP_MD could be used). */
-		if(ctx->engine)
-			ENGINE_finish(ctx->engine);
-		if(impl)
-			{
-			if (!ENGINE_init(impl))
-				{
-				EVPerr(EVP_F_EVP_DIGESTINIT_EX,EVP_R_INITIALIZATION_ERROR);
-				return 0;
-				}
-			}
-		else
-			/* Ask if an ENGINE is reserved for this job */
-			impl = ENGINE_get_digest_engine(type->type);
-		if(impl)
-			{
-			/* There's an ENGINE for this job ... (apparently) */
-			const EVP_MD *d = ENGINE_get_digest(impl, type->type);
-			if(!d)
-				{
-				/* Same comment from evp_enc.c */
-				EVPerr(EVP_F_EVP_DIGESTINIT_EX,EVP_R_INITIALIZATION_ERROR);
-				return 0;
-				}
-			/* We'll use the ENGINE's private digest definition */
-			type = d;
-			/* Store the ENGINE functional reference so we know
-			 * 'type' came from an ENGINE and we need to release
-			 * it when done. */
-			ctx->engine = impl;
-			}
-		else
-			ctx->engine = NULL;
-		}
-	else
-	if(!ctx->digest)
-		{
-		EVPerr(EVP_F_EVP_DIGESTINIT_EX,EVP_R_NO_DIGEST_SET);
-		return 0;
-		}
-#endif
-	if (ctx->digest != type)
-		{
-		if (ctx->digest && ctx->digest->ctx_size)
-			OPENSSL_free(ctx->md_data);
-		ctx->digest=type;
-		if (type->ctx_size)
-			ctx->md_data=OPENSSL_malloc(type->ctx_size);
-		}
-#ifndef OPENSSL_NO_ENGINE
-skip_to_init:
-#endif
-	return ctx->digest->init(ctx);
-	}
-
-int EVP_DigestUpdate(EVP_MD_CTX *ctx, const void *data,
-	     size_t count)
-	{
-	return ctx->digest->update(ctx,data,count);
-	}
-
-/* The caller can assume that this removes any secret data from the context */
-int EVP_DigestFinal(EVP_MD_CTX *ctx, unsigned char *md, unsigned int *size)
-	{
-	int ret;
-	ret = EVP_DigestFinal_ex(ctx, md, size);
-	EVP_MD_CTX_cleanup(ctx);
-	return ret;
-	}
-
-/* The caller can assume that this removes any secret data from the context */
-int EVP_DigestFinal_ex(EVP_MD_CTX *ctx, unsigned char *md, unsigned int *size)
-	{
-	int ret;
-
-	OPENSSL_assert(ctx->digest->md_size <= EVP_MAX_MD_SIZE);
-	ret=ctx->digest->final(ctx,md);
-	if (size != NULL)
-		*size=ctx->digest->md_size;
-	if (ctx->digest->cleanup)
-		{
-		ctx->digest->cleanup(ctx);
-		EVP_MD_CTX_set_flags(ctx,EVP_MD_CTX_FLAG_CLEANED);
-		}
-	memset(ctx->md_data,0,ctx->digest->ctx_size);
-	return ret;
-	}
-
-int EVP_MD_CTX_copy(EVP_MD_CTX *out, const EVP_MD_CTX *in)
-	{
-	EVP_MD_CTX_init(out);
-	return EVP_MD_CTX_copy_ex(out, in);
-	}
-
-int EVP_MD_CTX_copy_ex(EVP_MD_CTX *out, const EVP_MD_CTX *in)
-	{
-	unsigned char *tmp_buf;
-	if ((in == NULL) || (in->digest == NULL))
-		{
-		EVPerr(EVP_F_EVP_MD_CTX_COPY_EX,EVP_R_INPUT_NOT_INITIALIZED);
-		return 0;
-		}
-#ifndef OPENSSL_NO_ENGINE
-	/* Make sure it's safe to copy a digest context using an ENGINE */
-	if (in->engine && !ENGINE_init(in->engine))
-		{
-		EVPerr(EVP_F_EVP_MD_CTX_COPY_EX,ERR_R_ENGINE_LIB);
-		return 0;
-		}
-#endif
-
-	if (out->digest == in->digest)
-		{
-		tmp_buf = out->md_data;
-	    	EVP_MD_CTX_set_flags(out,EVP_MD_CTX_FLAG_REUSE);
-		}
-	else tmp_buf = NULL;
-	EVP_MD_CTX_cleanup(out);
-	memcpy(out,in,sizeof *out);
-
-	if (out->digest->ctx_size)
-		{
-		if (tmp_buf) out->md_data = tmp_buf;
-		else out->md_data=OPENSSL_malloc(out->digest->ctx_size);
-		memcpy(out->md_data,in->md_data,out->digest->ctx_size);
-		}
-
-	if (out->digest->copy)
-		return out->digest->copy(out,in);
-	
-	return 1;
-	}
-
-int EVP_Digest(const void *data, size_t count,
-		unsigned char *md, unsigned int *size, const EVP_MD *type, ENGINE *impl)
-	{
-	EVP_MD_CTX ctx;
-	int ret;
-
-	EVP_MD_CTX_init(&ctx);
-	EVP_MD_CTX_set_flags(&ctx,EVP_MD_CTX_FLAG_ONESHOT);
-	ret=EVP_DigestInit_ex(&ctx, type, impl)
-	  && EVP_DigestUpdate(&ctx, data, count)
-	  && EVP_DigestFinal_ex(&ctx, md, size);
-	EVP_MD_CTX_cleanup(&ctx);
-
-	return ret;
-	}
-
-void EVP_MD_CTX_destroy(EVP_MD_CTX *ctx)
-	{
-	EVP_MD_CTX_cleanup(ctx);
-	OPENSSL_free(ctx);
-	}
-
-/* This call frees resources associated with the context */
-int EVP_MD_CTX_cleanup(EVP_MD_CTX *ctx)
-	{
-	/* Don't assume ctx->md_data was cleaned in EVP_Digest_Final,
-	 * because sometimes only copies of the context are ever finalised.
-	 */
-	if (ctx->digest && ctx->digest->cleanup
-	    && !EVP_MD_CTX_test_flags(ctx,EVP_MD_CTX_FLAG_CLEANED))
-		ctx->digest->cleanup(ctx);
-	if (ctx->digest && ctx->digest->ctx_size && ctx->md_data
-	    && !EVP_MD_CTX_test_flags(ctx, EVP_MD_CTX_FLAG_REUSE))
-		{
-		OPENSSL_cleanse(ctx->md_data,ctx->digest->ctx_size);
-		OPENSSL_free(ctx->md_data);
-		}
-#ifndef OPENSSL_NO_ENGINE
-	if(ctx->engine)
-		/* The EVP_MD we used belongs to an ENGINE, release the
-		 * functional reference we held for this reason. */
-		ENGINE_finish(ctx->engine);
-#endif
-	memset(ctx,'\0',sizeof *ctx);
-
-	return 1;
-	}
diff --git a/crypto/openssl/crypto/evp/e_aes.c b/crypto/openssl/crypto/evp/e_aes.c
deleted file mode 100644
index bd6c0a3a62a3..000000000000
--- a/crypto/openssl/crypto/evp/e_aes.c
+++ /dev/null
@@ -1,120 +0,0 @@
-/* ====================================================================
- * Copyright (c) 2001 The OpenSSL Project.  All rights reserved.
- *
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions
- * are met:
- *
- * 1. Redistributions of source code must retain the above copyright
- *    notice, this list of conditions and the following disclaimer. 
- *
- * 2. Redistributions in binary form must reproduce the above copyright
- *    notice, this list of conditions and the following disclaimer in
- *    the documentation and/or other materials provided with the
- *    distribution.
- *
- * 3. All advertising materials mentioning features or use of this
- *    software must display the following acknowledgment:
- *    "This product includes software developed by the OpenSSL Project
- *    for use in the OpenSSL Toolkit. (http://www.openssl.org/)"
- *
- * 4. The names "OpenSSL Toolkit" and "OpenSSL Project" must not be used to
- *    endorse or promote products derived from this software without
- *    prior written permission. For written permission, please contact
- *    openssl-core@openssl.org.
- *
- * 5. Products derived from this software may not be called "OpenSSL"
- *    nor may "OpenSSL" appear in their names without prior written
- *    permission of the OpenSSL Project.
- *
- * 6. Redistributions of any form whatsoever must retain the following
- *    acknowledgment:
- *    "This product includes software developed by the OpenSSL Project
- *    for use in the OpenSSL Toolkit (http://www.openssl.org/)"
- *
- * THIS SOFTWARE IS PROVIDED BY THE OpenSSL PROJECT ``AS IS'' AND ANY
- * EXPRESSED OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
- * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR
- * PURPOSE ARE DISCLAIMED.  IN NO EVENT SHALL THE OpenSSL PROJECT OR
- * ITS CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
- * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
- * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
- * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
- * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
- * STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
- * ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED
- * OF THE POSSIBILITY OF SUCH DAMAGE.
- * ====================================================================
- *
- */
-
-#include <openssl/opensslconf.h>
-#ifndef OPENSSL_NO_AES
-#include <openssl/evp.h>
-#include <openssl/err.h>
-#include <string.h>
-#include <assert.h>
-#include <openssl/aes.h>
-#include "evp_locl.h"
-
-static int aes_init_key(EVP_CIPHER_CTX *ctx, const unsigned char *key,
-					const unsigned char *iv, int enc);
-
-typedef struct
-	{
-	AES_KEY ks;
-	} EVP_AES_KEY;
-
-#define data(ctx)	EVP_C_DATA(EVP_AES_KEY,ctx)
-
-IMPLEMENT_BLOCK_CIPHER(aes_128, ks, AES, EVP_AES_KEY,
-		       NID_aes_128, 16, 16, 16, 128,
-		       0, aes_init_key, NULL, 
-		       EVP_CIPHER_set_asn1_iv,
-		       EVP_CIPHER_get_asn1_iv,
-		       NULL)
-IMPLEMENT_BLOCK_CIPHER(aes_192, ks, AES, EVP_AES_KEY,
-		       NID_aes_192, 16, 24, 16, 128,
-		       0, aes_init_key, NULL, 
-		       EVP_CIPHER_set_asn1_iv,
-		       EVP_CIPHER_get_asn1_iv,
-		       NULL)
-IMPLEMENT_BLOCK_CIPHER(aes_256, ks, AES, EVP_AES_KEY,
-		       NID_aes_256, 16, 32, 16, 128,
-		       0, aes_init_key, NULL, 
-		       EVP_CIPHER_set_asn1_iv,
-		       EVP_CIPHER_get_asn1_iv,
-		       NULL)
-
-#define IMPLEMENT_AES_CFBR(ksize,cbits)	IMPLEMENT_CFBR(aes,AES,EVP_AES_KEY,ks,ksize,cbits,16)
-
-IMPLEMENT_AES_CFBR(128,1)
-IMPLEMENT_AES_CFBR(192,1)
-IMPLEMENT_AES_CFBR(256,1)
-
-IMPLEMENT_AES_CFBR(128,8)
-IMPLEMENT_AES_CFBR(192,8)
-IMPLEMENT_AES_CFBR(256,8)
-
-static int aes_init_key(EVP_CIPHER_CTX *ctx, const unsigned char *key,
-		   const unsigned char *iv, int enc)
-	{
-	int ret;
-
-	if ((ctx->cipher->flags & EVP_CIPH_MODE) == EVP_CIPH_CFB_MODE
-	    || (ctx->cipher->flags & EVP_CIPH_MODE) == EVP_CIPH_OFB_MODE
-	    || enc) 
-		ret=AES_set_encrypt_key(key, ctx->key_len * 8, ctx->cipher_data);
-	else
-		ret=AES_set_decrypt_key(key, ctx->key_len * 8, ctx->cipher_data);
-
-	if(ret < 0)
-		{
-		EVPerr(EVP_F_AES_INIT_KEY,EVP_R_AES_KEY_SETUP_FAILED);
-		return 0;
-		}
-
-	return 1;
-	}
-
-#endif
diff --git a/crypto/openssl/crypto/evp/e_bf.c b/crypto/openssl/crypto/evp/e_bf.c
deleted file mode 100644
index cc224e536394..000000000000
--- a/crypto/openssl/crypto/evp/e_bf.c
+++ /dev/null
@@ -1,88 +0,0 @@
-/* crypto/evp/e_bf.c */
-/* Copyright (C) 1995-1998 Eric Young (eay@cryptsoft.com)
- * All rights reserved.
- *
- * This package is an SSL implementation written
- * by Eric Young (eay@cryptsoft.com).
- * The implementation was written so as to conform with Netscapes SSL.
- * 
- * This library is free for commercial and non-commercial use as long as
- * the following conditions are aheared to.  The following conditions
- * apply to all code found in this distribution, be it the RC4, RSA,
- * lhash, DES, etc., code; not just the SSL code.  The SSL documentation
- * included with this distribution is covered by the same copyright terms
- * except that the holder is Tim Hudson (tjh@cryptsoft.com).
- * 
- * Copyright remains Eric Young's, and as such any Copyright notices in
- * the code are not to be removed.
- * If this package is used in a product, Eric Young should be given attribution
- * as the author of the parts of the library used.
- * This can be in the form of a textual message at program startup or
- * in documentation (online or textual) provided with the package.
- * 
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions
- * are met:
- * 1. Redistributions of source code must retain the copyright
- *    notice, this list of conditions and the following disclaimer.
- * 2. Redistributions in binary form must reproduce the above copyright
- *    notice, this list of conditions and the following disclaimer in the
- *    documentation and/or other materials provided with the distribution.
- * 3. All advertising materials mentioning features or use of this software
- *    must display the following acknowledgement:
- *    "This product includes cryptographic software written by
- *     Eric Young (eay@cryptsoft.com)"
- *    The word 'cryptographic' can be left out if the rouines from the library
- *    being used are not cryptographic related :-).
- * 4. If you include any Windows specific code (or a derivative thereof) from 
- *    the apps directory (application code) you must include an acknowledgement:
- *    "This product includes software written by Tim Hudson (tjh@cryptsoft.com)"
- * 
- * THIS SOFTWARE IS PROVIDED BY ERIC YOUNG ``AS IS'' AND
- * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
- * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
- * ARE DISCLAIMED.  IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE
- * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
- * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
- * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
- * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
- * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
- * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
- * SUCH DAMAGE.
- * 
- * The licence and distribution terms for any publically available version or
- * derivative of this code cannot be changed.  i.e. this code cannot simply be
- * copied and put under another distribution licence
- * [including the GNU Public Licence.]
- */
-
-#include <stdio.h>
-#include "cryptlib.h"
-#ifndef OPENSSL_NO_BF
-#include <openssl/evp.h>
-#include "evp_locl.h"
-#include <openssl/objects.h>
-#include <openssl/blowfish.h>
-
-static int bf_init_key(EVP_CIPHER_CTX *ctx, const unsigned char *key,
-		       const unsigned char *iv, int enc);
-
-typedef struct
-	{
-	BF_KEY ks;
-	} EVP_BF_KEY;
-
-#define data(ctx)	EVP_C_DATA(EVP_BF_KEY,ctx)
-
-IMPLEMENT_BLOCK_CIPHER(bf, ks, BF, EVP_BF_KEY, NID_bf, 8, 16, 8, 64,
-			EVP_CIPH_VARIABLE_LENGTH, bf_init_key, NULL, 
-			EVP_CIPHER_set_asn1_iv, EVP_CIPHER_get_asn1_iv, NULL)
-	
-static int bf_init_key(EVP_CIPHER_CTX *ctx, const unsigned char *key,
-		       const unsigned char *iv, int enc)
-	{
-	BF_set_key(&data(ctx)->ks,EVP_CIPHER_CTX_key_length(ctx),key);
-	return 1;
-	}
-
-#endif
diff --git a/crypto/openssl/crypto/evp/e_camellia.c b/crypto/openssl/crypto/evp/e_camellia.c
deleted file mode 100644
index a7b40d1c6001..000000000000
--- a/crypto/openssl/crypto/evp/e_camellia.c
+++ /dev/null
@@ -1,131 +0,0 @@
-/* crypto/evp/e_camellia.c -*- mode:C; c-file-style: "eay" -*- */
-/* ====================================================================
- * Copyright (c) 2006 The OpenSSL Project.  All rights reserved.
- *
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions
- * are met:
- *
- * 1. Redistributions of source code must retain the above copyright
- *    notice, this list of conditions and the following disclaimer. 
- *
- * 2. Redistributions in binary form must reproduce the above copyright
- *    notice, this list of conditions and the following disclaimer in
- *    the documentation and/or other materials provided with the
- *    distribution.
- *
- * 3. All advertising materials mentioning features or use of this
- *    software must display the following acknowledgment:
- *    "This product includes software developed by the OpenSSL Project
- *    for use in the OpenSSL Toolkit. (http://www.openssl.org/)"
- *
- * 4. The names "OpenSSL Toolkit" and "OpenSSL Project" must not be used to
- *    endorse or promote products derived from this software without
- *    prior written permission. For written permission, please contact
- *    openssl-core@openssl.org.
- *
- * 5. Products derived from this software may not be called "OpenSSL"
- *    nor may "OpenSSL" appear in their names without prior written
- *    permission of the OpenSSL Project.
- *
- * 6. Redistributions of any form whatsoever must retain the following
- *    acknowledgment:
- *    "This product includes software developed by the OpenSSL Project
- *    for use in the OpenSSL Toolkit (http://www.openssl.org/)"
- *
- * THIS SOFTWARE IS PROVIDED BY THE OpenSSL PROJECT ``AS IS'' AND ANY
- * EXPRESSED OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
- * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR
- * PURPOSE ARE DISCLAIMED.  IN NO EVENT SHALL THE OpenSSL PROJECT OR
- * ITS CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
- * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
- * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
- * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
- * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
- * STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
- * ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED
- * OF THE POSSIBILITY OF SUCH DAMAGE.
- * ====================================================================
- *
- * This product includes cryptographic software written by Eric Young
- * (eay@cryptsoft.com).  This product includes software written by Tim
- * Hudson (tjh@cryptsoft.com).
- *
- */
-
-#include <openssl/opensslconf.h>
-#ifndef OPENSSL_NO_CAMELLIA
-#include <openssl/evp.h>
-#include <openssl/err.h>
-#include <string.h>
-#include <assert.h>
-#include <openssl/camellia.h>
-#include "evp_locl.h"
-
-static int camellia_init_key(EVP_CIPHER_CTX *ctx, const unsigned char *key,
-	const unsigned char *iv, int enc);
-
-/* Camellia subkey Structure */
-typedef struct
-	{
-	CAMELLIA_KEY ks;
-	} EVP_CAMELLIA_KEY;
-
-/* Attribute operation for Camellia */
-#define data(ctx)	EVP_C_DATA(EVP_CAMELLIA_KEY,ctx)
-
-IMPLEMENT_BLOCK_CIPHER(camellia_128, ks, Camellia, EVP_CAMELLIA_KEY,
-	NID_camellia_128, 16, 16, 16, 128,
-	0, camellia_init_key, NULL, 
-	EVP_CIPHER_set_asn1_iv,
-	EVP_CIPHER_get_asn1_iv,
-	NULL)
-IMPLEMENT_BLOCK_CIPHER(camellia_192, ks, Camellia, EVP_CAMELLIA_KEY,
-	NID_camellia_192, 16, 24, 16, 128,
-	0, camellia_init_key, NULL, 
-	EVP_CIPHER_set_asn1_iv,
-	EVP_CIPHER_get_asn1_iv,
-	NULL)
-IMPLEMENT_BLOCK_CIPHER(camellia_256, ks, Camellia, EVP_CAMELLIA_KEY,
-	NID_camellia_256, 16, 32, 16, 128,
-	0, camellia_init_key, NULL, 
-	EVP_CIPHER_set_asn1_iv,
-	EVP_CIPHER_get_asn1_iv,
-	NULL)
-
-#define IMPLEMENT_CAMELLIA_CFBR(ksize,cbits)	IMPLEMENT_CFBR(camellia,Camellia,EVP_CAMELLIA_KEY,ks,ksize,cbits,16)
-
-IMPLEMENT_CAMELLIA_CFBR(128,1)
-IMPLEMENT_CAMELLIA_CFBR(192,1)
-IMPLEMENT_CAMELLIA_CFBR(256,1)
-
-IMPLEMENT_CAMELLIA_CFBR(128,8)
-IMPLEMENT_CAMELLIA_CFBR(192,8)
-IMPLEMENT_CAMELLIA_CFBR(256,8)
-
-
-
-/* The subkey for Camellia is generated. */ 
-static int camellia_init_key(EVP_CIPHER_CTX *ctx, const unsigned char *key,
-	const unsigned char *iv, int enc)
-	{
-	int ret;
-
-	ret=Camellia_set_key(key, ctx->key_len * 8, ctx->cipher_data);
-
-	if(ret < 0)
-		{
-		EVPerr(EVP_F_CAMELLIA_INIT_KEY,EVP_R_CAMELLIA_KEY_SETUP_FAILED);
-		return 0;
-		}
-
-	return 1;
-	}
-
-#else
-
-# ifdef PEDANTIC
-static void *dummy=&dummy;
-# endif
-
-#endif
diff --git a/crypto/openssl/crypto/evp/e_cast.c b/crypto/openssl/crypto/evp/e_cast.c
deleted file mode 100644
index d77bcd9298f5..000000000000
--- a/crypto/openssl/crypto/evp/e_cast.c
+++ /dev/null
@@ -1,90 +0,0 @@
-/* crypto/evp/e_cast.c */
-/* Copyright (C) 1995-1998 Eric Young (eay@cryptsoft.com)
- * All rights reserved.
- *
- * This package is an SSL implementation written
- * by Eric Young (eay@cryptsoft.com).
- * The implementation was written so as to conform with Netscapes SSL.
- * 
- * This library is free for commercial and non-commercial use as long as
- * the following conditions are aheared to.  The following conditions
- * apply to all code found in this distribution, be it the RC4, RSA,
- * lhash, DES, etc., code; not just the SSL code.  The SSL documentation
- * included with this distribution is covered by the same copyright terms
- * except that the holder is Tim Hudson (tjh@cryptsoft.com).
- * 
- * Copyright remains Eric Young's, and as such any Copyright notices in
- * the code are not to be removed.
- * If this package is used in a product, Eric Young should be given attribution
- * as the author of the parts of the library used.
- * This can be in the form of a textual message at program startup or
- * in documentation (online or textual) provided with the package.
- * 
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions
- * are met:
- * 1. Redistributions of source code must retain the copyright
- *    notice, this list of conditions and the following disclaimer.
- * 2. Redistributions in binary form must reproduce the above copyright
- *    notice, this list of conditions and the following disclaimer in the
- *    documentation and/or other materials provided with the distribution.
- * 3. All advertising materials mentioning features or use of this software
- *    must display the following acknowledgement:
- *    "This product includes cryptographic software written by
- *     Eric Young (eay@cryptsoft.com)"
- *    The word 'cryptographic' can be left out if the rouines from the library
- *    being used are not cryptographic related :-).
- * 4. If you include any Windows specific code (or a derivative thereof) from 
- *    the apps directory (application code) you must include an acknowledgement:
- *    "This product includes software written by Tim Hudson (tjh@cryptsoft.com)"
- * 
- * THIS SOFTWARE IS PROVIDED BY ERIC YOUNG ``AS IS'' AND
- * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
- * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
- * ARE DISCLAIMED.  IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE
- * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
- * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
- * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
- * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
- * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
- * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
- * SUCH DAMAGE.
- * 
- * The licence and distribution terms for any publically available version or
- * derivative of this code cannot be changed.  i.e. this code cannot simply be
- * copied and put under another distribution licence
- * [including the GNU Public Licence.]
- */
-
-#include <stdio.h>
-#include "cryptlib.h"
-
-#ifndef OPENSSL_NO_CAST
-#include <openssl/evp.h>
-#include <openssl/objects.h>
-#include "evp_locl.h"
-#include <openssl/cast.h>
-
-static int cast_init_key(EVP_CIPHER_CTX *ctx, const unsigned char *key,
-			 const unsigned char *iv,int enc);
-
-typedef struct
-	{
-	CAST_KEY ks;
-	} EVP_CAST_KEY;
-
-#define data(ctx)	EVP_C_DATA(EVP_CAST_KEY,ctx)
-
-IMPLEMENT_BLOCK_CIPHER(cast5, ks, CAST, EVP_CAST_KEY, 
-			NID_cast5, 8, CAST_KEY_LENGTH, 8, 64,
-			EVP_CIPH_VARIABLE_LENGTH, cast_init_key, NULL,
-			EVP_CIPHER_set_asn1_iv, EVP_CIPHER_get_asn1_iv, NULL)
-			
-static int cast_init_key(EVP_CIPHER_CTX *ctx, const unsigned char *key,
-			 const unsigned char *iv, int enc)
-	{
-	CAST_set_key(&data(ctx)->ks,EVP_CIPHER_CTX_key_length(ctx),key);
-	return 1;
-	}
-
-#endif
diff --git a/crypto/openssl/crypto/evp/e_des.c b/crypto/openssl/crypto/evp/e_des.c
deleted file mode 100644
index 856323648cd4..000000000000
--- a/crypto/openssl/crypto/evp/e_des.c
+++ /dev/null
@@ -1,176 +0,0 @@
-/* crypto/evp/e_des.c */
-/* Copyright (C) 1995-1998 Eric Young (eay@cryptsoft.com)
- * All rights reserved.
- *
- * This package is an SSL implementation written
- * by Eric Young (eay@cryptsoft.com).
- * The implementation was written so as to conform with Netscapes SSL.
- * 
- * This library is free for commercial and non-commercial use as long as
- * the following conditions are aheared to.  The following conditions
- * apply to all code found in this distribution, be it the RC4, RSA,
- * lhash, DES, etc., code; not just the SSL code.  The SSL documentation
- * included with this distribution is covered by the same copyright terms
- * except that the holder is Tim Hudson (tjh@cryptsoft.com).
- * 
- * Copyright remains Eric Young's, and as such any Copyright notices in
- * the code are not to be removed.
- * If this package is used in a product, Eric Young should be given attribution
- * as the author of the parts of the library used.
- * This can be in the form of a textual message at program startup or
- * in documentation (online or textual) provided with the package.
- * 
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions
- * are met:
- * 1. Redistributions of source code must retain the copyright
- *    notice, this list of conditions and the following disclaimer.
- * 2. Redistributions in binary form must reproduce the above copyright
- *    notice, this list of conditions and the following disclaimer in the
- *    documentation and/or other materials provided with the distribution.
- * 3. All advertising materials mentioning features or use of this software
- *    must display the following acknowledgement:
- *    "This product includes cryptographic software written by
- *     Eric Young (eay@cryptsoft.com)"
- *    The word 'cryptographic' can be left out if the rouines from the library
- *    being used are not cryptographic related :-).
- * 4. If you include any Windows specific code (or a derivative thereof) from 
- *    the apps directory (application code) you must include an acknowledgement:
- *    "This product includes software written by Tim Hudson (tjh@cryptsoft.com)"
- * 
- * THIS SOFTWARE IS PROVIDED BY ERIC YOUNG ``AS IS'' AND
- * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
- * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
- * ARE DISCLAIMED.  IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE
- * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
- * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
- * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
- * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
- * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
- * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
- * SUCH DAMAGE.
- * 
- * The licence and distribution terms for any publically available version or
- * derivative of this code cannot be changed.  i.e. this code cannot simply be
- * copied and put under another distribution licence
- * [including the GNU Public Licence.]
- */
-
-#include <stdio.h>
-#include "cryptlib.h"
-#ifndef OPENSSL_NO_DES
-#include <openssl/evp.h>
-#include <openssl/objects.h>
-#include "evp_locl.h"
-#include <openssl/des.h>
-#include <openssl/rand.h>
-
-static int des_init_key(EVP_CIPHER_CTX *ctx, const unsigned char *key,
-			const unsigned char *iv, int enc);
-static int des_ctrl(EVP_CIPHER_CTX *c, int type, int arg, void *ptr);
-
-/* Because of various casts and different names can't use IMPLEMENT_BLOCK_CIPHER */
-
-static int des_ecb_cipher(EVP_CIPHER_CTX *ctx, unsigned char *out,
-			  const unsigned char *in, unsigned int inl)
-{
-	BLOCK_CIPHER_ecb_loop()
-		DES_ecb_encrypt((DES_cblock *)(in + i), (DES_cblock *)(out + i), ctx->cipher_data, ctx->encrypt);
-	return 1;
-}
-
-static int des_ofb_cipher(EVP_CIPHER_CTX *ctx, unsigned char *out,
-			  const unsigned char *in, unsigned int inl)
-{
-	DES_ofb64_encrypt(in, out, (long)inl, ctx->cipher_data, (DES_cblock *)ctx->iv, &ctx->num);
-	return 1;
-}
-
-static int des_cbc_cipher(EVP_CIPHER_CTX *ctx, unsigned char *out,
-			  const unsigned char *in, unsigned int inl)
-{
-	DES_ncbc_encrypt(in, out, (long)inl, ctx->cipher_data,
-			 (DES_cblock *)ctx->iv, ctx->encrypt);
-	return 1;
-}
-
-static int des_cfb64_cipher(EVP_CIPHER_CTX *ctx, unsigned char *out,
-			    const unsigned char *in, unsigned int inl)
-{
-	DES_cfb64_encrypt(in, out, (long)inl, ctx->cipher_data,
-			  (DES_cblock *)ctx->iv, &ctx->num, ctx->encrypt);
-	return 1;
-}
-
-/* Although we have a CFB-r implementation for DES, it doesn't pack the right
-   way, so wrap it here */
-static int des_cfb1_cipher(EVP_CIPHER_CTX *ctx, unsigned char *out,
-			   const unsigned char *in, unsigned int inl)
-    {
-    unsigned int n;
-    unsigned char c[1],d[1];
-
-    for(n=0 ; n < inl ; ++n)
-	{
-	c[0]=(in[n/8]&(1 << (7-n%8))) ? 0x80 : 0;
-	DES_cfb_encrypt(c,d,1,1,ctx->cipher_data,(DES_cblock *)ctx->iv,
-			ctx->encrypt);
-	out[n/8]=(out[n/8]&~(0x80 >> (n%8)))|((d[0]&0x80) >> (n%8));
-	}
-    return 1;
-    }
-
-static int des_cfb8_cipher(EVP_CIPHER_CTX *ctx, unsigned char *out,
-			   const unsigned char *in, unsigned int inl)
-    {
-    DES_cfb_encrypt(in,out,8,inl,ctx->cipher_data,(DES_cblock *)ctx->iv,
-		    ctx->encrypt);
-    return 1;
-    }
-
-BLOCK_CIPHER_defs(des, DES_key_schedule, NID_des, 8, 8, 8, 64,
-			EVP_CIPH_RAND_KEY, des_init_key, NULL,
-			EVP_CIPHER_set_asn1_iv,
-			EVP_CIPHER_get_asn1_iv,
-			des_ctrl)
-
-BLOCK_CIPHER_def_cfb(des,DES_key_schedule,NID_des,8,8,1,
-		     EVP_CIPH_RAND_KEY, des_init_key,NULL,
-		     EVP_CIPHER_set_asn1_iv,
-		     EVP_CIPHER_get_asn1_iv,des_ctrl)
-
-BLOCK_CIPHER_def_cfb(des,DES_key_schedule,NID_des,8,8,8,
-		     EVP_CIPH_RAND_KEY,des_init_key,NULL,
-		     EVP_CIPHER_set_asn1_iv,
-		     EVP_CIPHER_get_asn1_iv,des_ctrl)
-
-static int des_init_key(EVP_CIPHER_CTX *ctx, const unsigned char *key,
-			const unsigned char *iv, int enc)
-	{
-	DES_cblock *deskey = (DES_cblock *)key;
-#ifdef EVP_CHECK_DES_KEY
-	if(DES_set_key_checked(deskey,ctx->cipher_data) != 0)
-		return 0;
-#else
-	DES_set_key_unchecked(deskey,ctx->cipher_data);
-#endif
-	return 1;
-	}
-
-static int des_ctrl(EVP_CIPHER_CTX *c, int type, int arg, void *ptr)
-	{
-	
-	switch(type)
-		{
-	case EVP_CTRL_RAND_KEY:
-		if (RAND_bytes(ptr, 8) <= 0)
-			return 0;
-		DES_set_odd_parity((DES_cblock *)ptr);
-		return 1;
-
-	default:
-		return -1;
-		}
-	}
-
-#endif
diff --git a/crypto/openssl/crypto/evp/e_des3.c b/crypto/openssl/crypto/evp/e_des3.c
deleted file mode 100644
index ac148efab237..000000000000
--- a/crypto/openssl/crypto/evp/e_des3.c
+++ /dev/null
@@ -1,271 +0,0 @@
-/* crypto/evp/e_des3.c */
-/* Copyright (C) 1995-1998 Eric Young (eay@cryptsoft.com)
- * All rights reserved.
- *
- * This package is an SSL implementation written
- * by Eric Young (eay@cryptsoft.com).
- * The implementation was written so as to conform with Netscapes SSL.
- * 
- * This library is free for commercial and non-commercial use as long as
- * the following conditions are aheared to.  The following conditions
- * apply to all code found in this distribution, be it the RC4, RSA,
- * lhash, DES, etc., code; not just the SSL code.  The SSL documentation
- * included with this distribution is covered by the same copyright terms
- * except that the holder is Tim Hudson (tjh@cryptsoft.com).
- * 
- * Copyright remains Eric Young's, and as such any Copyright notices in
- * the code are not to be removed.
- * If this package is used in a product, Eric Young should be given attribution
- * as the author of the parts of the library used.
- * This can be in the form of a textual message at program startup or
- * in documentation (online or textual) provided with the package.
- * 
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions
- * are met:
- * 1. Redistributions of source code must retain the copyright
- *    notice, this list of conditions and the following disclaimer.
- * 2. Redistributions in binary form must reproduce the above copyright
- *    notice, this list of conditions and the following disclaimer in the
- *    documentation and/or other materials provided with the distribution.
- * 3. All advertising materials mentioning features or use of this software
- *    must display the following acknowledgement:
- *    "This product includes cryptographic software written by
- *     Eric Young (eay@cryptsoft.com)"
- *    The word 'cryptographic' can be left out if the rouines from the library
- *    being used are not cryptographic related :-).
- * 4. If you include any Windows specific code (or a derivative thereof) from 
- *    the apps directory (application code) you must include an acknowledgement:
- *    "This product includes software written by Tim Hudson (tjh@cryptsoft.com)"
- * 
- * THIS SOFTWARE IS PROVIDED BY ERIC YOUNG ``AS IS'' AND
- * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
- * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
- * ARE DISCLAIMED.  IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE
- * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
- * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
- * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
- * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
- * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
- * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
- * SUCH DAMAGE.
- * 
- * The licence and distribution terms for any publically available version or
- * derivative of this code cannot be changed.  i.e. this code cannot simply be
- * copied and put under another distribution licence
- * [including the GNU Public Licence.]
- */
-
-#include <stdio.h>
-#include "cryptlib.h"
-#ifndef OPENSSL_NO_DES
-#include <openssl/evp.h>
-#include <openssl/objects.h>
-#include "evp_locl.h"
-#include <openssl/des.h>
-#include <openssl/rand.h>
-
-static int des_ede_init_key(EVP_CIPHER_CTX *ctx, const unsigned char *key,
-			    const unsigned char *iv,int enc);
-
-static int des_ede3_init_key(EVP_CIPHER_CTX *ctx, const unsigned char *key,
-			     const unsigned char *iv,int enc);
-
-static int des3_ctrl(EVP_CIPHER_CTX *c, int type, int arg, void *ptr);
-
-typedef struct
-    {
-    DES_key_schedule ks1;/* key schedule */
-    DES_key_schedule ks2;/* key schedule (for ede) */
-    DES_key_schedule ks3;/* key schedule (for ede3) */
-    } DES_EDE_KEY;
-
-#define data(ctx) ((DES_EDE_KEY *)(ctx)->cipher_data)
-
-/* Because of various casts and different args can't use IMPLEMENT_BLOCK_CIPHER */
-
-static int des_ede_ecb_cipher(EVP_CIPHER_CTX *ctx, unsigned char *out,
-			      const unsigned char *in, unsigned int inl)
-{
-	BLOCK_CIPHER_ecb_loop()
-		DES_ecb3_encrypt((const_DES_cblock *)(in + i),
-				 (DES_cblock *)(out + i),
-				 &data(ctx)->ks1, &data(ctx)->ks2,
-				 &data(ctx)->ks3,
-				 ctx->encrypt);
-	return 1;
-}
-
-static int des_ede_ofb_cipher(EVP_CIPHER_CTX *ctx, unsigned char *out,
-			      const unsigned char *in, unsigned int inl)
-{
-	DES_ede3_ofb64_encrypt(in, out, (long)inl,
-			       &data(ctx)->ks1, &data(ctx)->ks2, &data(ctx)->ks3,
-			       (DES_cblock *)ctx->iv, &ctx->num);
-	return 1;
-}
-
-static int des_ede_cbc_cipher(EVP_CIPHER_CTX *ctx, unsigned char *out,
-			      const unsigned char *in, unsigned int inl)
-{
-#ifdef KSSL_DEBUG
-	{
-        int i;
-        char *cp;
-	printf("des_ede_cbc_cipher(ctx=%lx, buflen=%d)\n", ctx, ctx->buf_len);
-	printf("\t iv= ");
-        for(i=0;i<8;i++)
-                printf("%02X",ctx->iv[i]);
-	printf("\n");
-	}
-#endif    /* KSSL_DEBUG */
-	DES_ede3_cbc_encrypt(in, out, (long)inl,
-			     &data(ctx)->ks1, &data(ctx)->ks2, &data(ctx)->ks3,
-			     (DES_cblock *)ctx->iv, ctx->encrypt);
-	return 1;
-}
-
-static int des_ede_cfb64_cipher(EVP_CIPHER_CTX *ctx, unsigned char *out,
-			      const unsigned char *in, unsigned int inl)
-{
-	DES_ede3_cfb64_encrypt(in, out, (long)inl, 
-			       &data(ctx)->ks1, &data(ctx)->ks2, &data(ctx)->ks3,
-			       (DES_cblock *)ctx->iv, &ctx->num, ctx->encrypt);
-	return 1;
-}
-
-/* Although we have a CFB-r implementation for 3-DES, it doesn't pack the right
-   way, so wrap it here */
-static int des_ede3_cfb1_cipher(EVP_CIPHER_CTX *ctx, unsigned char *out,
-				const unsigned char *in, unsigned int inl)
-    {
-    unsigned int n;
-    unsigned char c[1],d[1];
-
-    for(n=0 ; n < inl ; ++n)
-	{
-	c[0]=(in[n/8]&(1 << (7-n%8))) ? 0x80 : 0;
-	DES_ede3_cfb_encrypt(c,d,1,1,
-			     &data(ctx)->ks1,&data(ctx)->ks2,&data(ctx)->ks3,
-			     (DES_cblock *)ctx->iv,ctx->encrypt);
-	out[n/8]=(out[n/8]&~(0x80 >> (n%8)))|((d[0]&0x80) >> (n%8));
-	}
-
-    return 1;
-    }
-
-static int des_ede3_cfb8_cipher(EVP_CIPHER_CTX *ctx, unsigned char *out,
-				const unsigned char *in, unsigned int inl)
-    {
-    DES_ede3_cfb_encrypt(in,out,8,inl,
-			 &data(ctx)->ks1,&data(ctx)->ks2,&data(ctx)->ks3,
-			 (DES_cblock *)ctx->iv,ctx->encrypt);
-    return 1;
-    }
-
-BLOCK_CIPHER_defs(des_ede, DES_EDE_KEY, NID_des_ede, 8, 16, 8, 64,
-			EVP_CIPH_RAND_KEY, des_ede_init_key, NULL, 
-			EVP_CIPHER_set_asn1_iv,
-			EVP_CIPHER_get_asn1_iv,
-			des3_ctrl)
-
-#define des_ede3_cfb64_cipher des_ede_cfb64_cipher
-#define des_ede3_ofb_cipher des_ede_ofb_cipher
-#define des_ede3_cbc_cipher des_ede_cbc_cipher
-#define des_ede3_ecb_cipher des_ede_ecb_cipher
-
-BLOCK_CIPHER_defs(des_ede3, DES_EDE_KEY, NID_des_ede3, 8, 24, 8, 64,
-			EVP_CIPH_RAND_KEY, des_ede3_init_key, NULL, 
-			EVP_CIPHER_set_asn1_iv,
-			EVP_CIPHER_get_asn1_iv,
-			des3_ctrl)
-
-BLOCK_CIPHER_def_cfb(des_ede3,DES_EDE_KEY,NID_des_ede3,24,8,1,
-		     EVP_CIPH_RAND_KEY, des_ede3_init_key,NULL,
-		     EVP_CIPHER_set_asn1_iv,
-		     EVP_CIPHER_get_asn1_iv,
-		     des3_ctrl)
-
-BLOCK_CIPHER_def_cfb(des_ede3,DES_EDE_KEY,NID_des_ede3,24,8,8,
-		     EVP_CIPH_RAND_KEY, des_ede3_init_key,NULL,
-		     EVP_CIPHER_set_asn1_iv,
-		     EVP_CIPHER_get_asn1_iv,
-		     des3_ctrl)
-
-static int des_ede_init_key(EVP_CIPHER_CTX *ctx, const unsigned char *key,
-			    const unsigned char *iv, int enc)
-	{
-	DES_cblock *deskey = (DES_cblock *)key;
-#ifdef EVP_CHECK_DES_KEY
-	if (DES_set_key_checked(&deskey[0],&data(ctx)->ks1)
-		!! DES_set_key_checked(&deskey[1],&data(ctx)->ks2))
-		return 0;
-#else
-	DES_set_key_unchecked(&deskey[0],&data(ctx)->ks1);
-	DES_set_key_unchecked(&deskey[1],&data(ctx)->ks2);
-#endif
-	memcpy(&data(ctx)->ks3,&data(ctx)->ks1,
-	       sizeof(data(ctx)->ks1));
-	return 1;
-	}
-
-static int des_ede3_init_key(EVP_CIPHER_CTX *ctx, const unsigned char *key,
-			     const unsigned char *iv, int enc)
-	{
-	DES_cblock *deskey = (DES_cblock *)key;
-#ifdef KSSL_DEBUG
-	{
-        int i;
-        printf("des_ede3_init_key(ctx=%lx)\n", ctx);
-	printf("\tKEY= ");
-        for(i=0;i<24;i++) printf("%02X",key[i]); printf("\n");
-	printf("\t IV= ");
-        for(i=0;i<8;i++) printf("%02X",iv[i]); printf("\n");
-	}
-#endif	/* KSSL_DEBUG */
-
-#ifdef EVP_CHECK_DES_KEY
-	if (DES_set_key_checked(&deskey[0],&data(ctx)->ks1)
-		|| DES_set_key_checked(&deskey[1],&data(ctx)->ks2)
-		|| DES_set_key_checked(&deskey[2],&data(ctx)->ks3))
-		return 0;
-#else
-	DES_set_key_unchecked(&deskey[0],&data(ctx)->ks1);
-	DES_set_key_unchecked(&deskey[1],&data(ctx)->ks2);
-	DES_set_key_unchecked(&deskey[2],&data(ctx)->ks3);
-#endif
-	return 1;
-	}
-
-static int des3_ctrl(EVP_CIPHER_CTX *c, int type, int arg, void *ptr)
-	{
-
-	DES_cblock *deskey = ptr;
-
-	switch(type)
-		{
-	case EVP_CTRL_RAND_KEY:
-		if (RAND_bytes(ptr, c->key_len) <= 0)
-			return 0;
-		DES_set_odd_parity(deskey);
-		if (c->key_len >= 16)
-			DES_set_odd_parity(deskey + 1);
-		if (c->key_len >= 24)
-			DES_set_odd_parity(deskey + 2);
-		return 1;
-
-	default:
-		return -1;
-		}
-	}
-
-const EVP_CIPHER *EVP_des_ede(void)
-{
-	return &des_ede_ecb;
-}
-
-const EVP_CIPHER *EVP_des_ede3(void)
-{
-	return &des_ede3_ecb;
-}
-#endif
diff --git a/crypto/openssl/crypto/evp/e_dsa.c b/crypto/openssl/crypto/evp/e_dsa.c
deleted file mode 100644
index b96f2738b3ee..000000000000
--- a/crypto/openssl/crypto/evp/e_dsa.c
+++ /dev/null
@@ -1,71 +0,0 @@
-/* crypto/evp/e_dsa.c */
-/* Copyright (C) 1995-1998 Eric Young (eay@cryptsoft.com)
- * All rights reserved.
- *
- * This package is an SSL implementation written
- * by Eric Young (eay@cryptsoft.com).
- * The implementation was written so as to conform with Netscapes SSL.
- * 
- * This library is free for commercial and non-commercial use as long as
- * the following conditions are aheared to.  The following conditions
- * apply to all code found in this distribution, be it the RC4, RSA,
- * lhash, DES, etc., code; not just the SSL code.  The SSL documentation
- * included with this distribution is covered by the same copyright terms
- * except that the holder is Tim Hudson (tjh@cryptsoft.com).
- * 
- * Copyright remains Eric Young's, and as such any Copyright notices in
- * the code are not to be removed.
- * If this package is used in a product, Eric Young should be given attribution
- * as the author of the parts of the library used.
- * This can be in the form of a textual message at program startup or
- * in documentation (online or textual) provided with the package.
- * 
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions
- * are met:
- * 1. Redistributions of source code must retain the copyright
- *    notice, this list of conditions and the following disclaimer.
- * 2. Redistributions in binary form must reproduce the above copyright
- *    notice, this list of conditions and the following disclaimer in the
- *    documentation and/or other materials provided with the distribution.
- * 3. All advertising materials mentioning features or use of this software
- *    must display the following acknowledgement:
- *    "This product includes cryptographic software written by
- *     Eric Young (eay@cryptsoft.com)"
- *    The word 'cryptographic' can be left out if the rouines from the library
- *    being used are not cryptographic related :-).
- * 4. If you include any Windows specific code (or a derivative thereof) from 
- *    the apps directory (application code) you must include an acknowledgement:
- *    "This product includes software written by Tim Hudson (tjh@cryptsoft.com)"
- * 
- * THIS SOFTWARE IS PROVIDED BY ERIC YOUNG ``AS IS'' AND
- * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
- * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
- * ARE DISCLAIMED.  IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE
- * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
- * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
- * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
- * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
- * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
- * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
- * SUCH DAMAGE.
- * 
- * The licence and distribution terms for any publically available version or
- * derivative of this code cannot be changed.  i.e. this code cannot simply be
- * copied and put under another distribution licence
- * [including the GNU Public Licence.]
- */
-
-#include <stdio.h>
-#include "cryptlib.h"
-#include <openssl/evp.h>
-#include <openssl/objects.h>
-#include <openssl/x509.h>
-
-static EVP_PKEY_METHOD dss_method=
-	{
-	DSA_sign,
-	DSA_verify,
-	{EVP_PKEY_DSA,EVP_PKEY_DSA2,EVP_PKEY_DSA3,NULL},
-	};
-
diff --git a/crypto/openssl/crypto/evp/e_idea.c b/crypto/openssl/crypto/evp/e_idea.c
deleted file mode 100644
index 48c33a774a5b..000000000000
--- a/crypto/openssl/crypto/evp/e_idea.c
+++ /dev/null
@@ -1,118 +0,0 @@
-/* crypto/evp/e_idea.c */
-/* Copyright (C) 1995-1998 Eric Young (eay@cryptsoft.com)
- * All rights reserved.
- *
- * This package is an SSL implementation written
- * by Eric Young (eay@cryptsoft.com).
- * The implementation was written so as to conform with Netscapes SSL.
- * 
- * This library is free for commercial and non-commercial use as long as
- * the following conditions are aheared to.  The following conditions
- * apply to all code found in this distribution, be it the RC4, RSA,
- * lhash, DES, etc., code; not just the SSL code.  The SSL documentation
- * included with this distribution is covered by the same copyright terms
- * except that the holder is Tim Hudson (tjh@cryptsoft.com).
- * 
- * Copyright remains Eric Young's, and as such any Copyright notices in
- * the code are not to be removed.
- * If this package is used in a product, Eric Young should be given attribution
- * as the author of the parts of the library used.
- * This can be in the form of a textual message at program startup or
- * in documentation (online or textual) provided with the package.
- * 
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions
- * are met:
- * 1. Redistributions of source code must retain the copyright
- *    notice, this list of conditions and the following disclaimer.
- * 2. Redistributions in binary form must reproduce the above copyright
- *    notice, this list of conditions and the following disclaimer in the
- *    documentation and/or other materials provided with the distribution.
- * 3. All advertising materials mentioning features or use of this software
- *    must display the following acknowledgement:
- *    "This product includes cryptographic software written by
- *     Eric Young (eay@cryptsoft.com)"
- *    The word 'cryptographic' can be left out if the rouines from the library
- *    being used are not cryptographic related :-).
- * 4. If you include any Windows specific code (or a derivative thereof) from 
- *    the apps directory (application code) you must include an acknowledgement:
- *    "This product includes software written by Tim Hudson (tjh@cryptsoft.com)"
- * 
- * THIS SOFTWARE IS PROVIDED BY ERIC YOUNG ``AS IS'' AND
- * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
- * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
- * ARE DISCLAIMED.  IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE
- * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
- * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
- * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
- * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
- * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
- * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
- * SUCH DAMAGE.
- * 
- * The licence and distribution terms for any publically available version or
- * derivative of this code cannot be changed.  i.e. this code cannot simply be
- * copied and put under another distribution licence
- * [including the GNU Public Licence.]
- */
-
-#include <stdio.h>
-#include "cryptlib.h"
-
-#ifndef OPENSSL_NO_IDEA
-#include <openssl/evp.h>
-#include <openssl/objects.h>
-#include "evp_locl.h"
-#include <openssl/idea.h>
-
-static int idea_init_key(EVP_CIPHER_CTX *ctx, const unsigned char *key,
-			 const unsigned char *iv,int enc);
-
-/* NB idea_ecb_encrypt doesn't take an 'encrypt' argument so we treat it as a special
- * case 
- */
-
-static int idea_ecb_cipher(EVP_CIPHER_CTX *ctx, unsigned char *out,
-			   const unsigned char *in, unsigned int inl)
-{
-	BLOCK_CIPHER_ecb_loop()
-		idea_ecb_encrypt(in + i, out + i, ctx->cipher_data);
-	return 1;
-}
-
-/* Can't use IMPLEMENT_BLOCK_CIPHER because idea_ecb_encrypt is different */
-
-typedef struct
-	{
-	IDEA_KEY_SCHEDULE ks;
-	} EVP_IDEA_KEY;
-
-BLOCK_CIPHER_func_cbc(idea, idea, EVP_IDEA_KEY, ks)
-BLOCK_CIPHER_func_ofb(idea, idea, 64, EVP_IDEA_KEY, ks)
-BLOCK_CIPHER_func_cfb(idea, idea, 64, EVP_IDEA_KEY, ks)
-
-BLOCK_CIPHER_defs(idea, IDEA_KEY_SCHEDULE, NID_idea, 8, 16, 8, 64,
-			0, idea_init_key, NULL, 
-			EVP_CIPHER_set_asn1_iv, EVP_CIPHER_get_asn1_iv, NULL)
-
-static int idea_init_key(EVP_CIPHER_CTX *ctx, const unsigned char *key,
-			 const unsigned char *iv, int enc)
-	{
-	if(!enc) {
-		if (EVP_CIPHER_CTX_mode(ctx) == EVP_CIPH_OFB_MODE) enc = 1;
-		else if (EVP_CIPHER_CTX_mode(ctx) == EVP_CIPH_CFB_MODE) enc = 1;
-	}
-	if (enc) idea_set_encrypt_key(key,ctx->cipher_data);
-	else
-		{
-		IDEA_KEY_SCHEDULE tmp;
-
-		idea_set_encrypt_key(key,&tmp);
-		idea_set_decrypt_key(&tmp,ctx->cipher_data);
-		OPENSSL_cleanse((unsigned char *)&tmp,
-				sizeof(IDEA_KEY_SCHEDULE));
-		}
-	return 1;
-	}
-
-#endif
diff --git a/crypto/openssl/crypto/evp/e_null.c b/crypto/openssl/crypto/evp/e_null.c
deleted file mode 100644
index 5205259f18ca..000000000000
--- a/crypto/openssl/crypto/evp/e_null.c
+++ /dev/null
@@ -1,102 +0,0 @@
-/* crypto/evp/e_null.c */
-/* Copyright (C) 1995-1998 Eric Young (eay@cryptsoft.com)
- * All rights reserved.
- *
- * This package is an SSL implementation written
- * by Eric Young (eay@cryptsoft.com).
- * The implementation was written so as to conform with Netscapes SSL.
- * 
- * This library is free for commercial and non-commercial use as long as
- * the following conditions are aheared to.  The following conditions
- * apply to all code found in this distribution, be it the RC4, RSA,
- * lhash, DES, etc., code; not just the SSL code.  The SSL documentation
- * included with this distribution is covered by the same copyright terms
- * except that the holder is Tim Hudson (tjh@cryptsoft.com).
- * 
- * Copyright remains Eric Young's, and as such any Copyright notices in
- * the code are not to be removed.
- * If this package is used in a product, Eric Young should be given attribution
- * as the author of the parts of the library used.
- * This can be in the form of a textual message at program startup or
- * in documentation (online or textual) provided with the package.
- * 
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions
- * are met:
- * 1. Redistributions of source code must retain the copyright
- *    notice, this list of conditions and the following disclaimer.
- * 2. Redistributions in binary form must reproduce the above copyright
- *    notice, this list of conditions and the following disclaimer in the
- *    documentation and/or other materials provided with the distribution.
- * 3. All advertising materials mentioning features or use of this software
- *    must display the following acknowledgement:
- *    "This product includes cryptographic software written by
- *     Eric Young (eay@cryptsoft.com)"
- *    The word 'cryptographic' can be left out if the rouines from the library
- *    being used are not cryptographic related :-).
- * 4. If you include any Windows specific code (or a derivative thereof) from 
- *    the apps directory (application code) you must include an acknowledgement:
- *    "This product includes software written by Tim Hudson (tjh@cryptsoft.com)"
- * 
- * THIS SOFTWARE IS PROVIDED BY ERIC YOUNG ``AS IS'' AND
- * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
- * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
- * ARE DISCLAIMED.  IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE
- * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
- * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
- * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
- * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
- * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
- * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
- * SUCH DAMAGE.
- * 
- * The licence and distribution terms for any publically available version or
- * derivative of this code cannot be changed.  i.e. this code cannot simply be
- * copied and put under another distribution licence
- * [including the GNU Public Licence.]
- */
-
-#include <stdio.h>
-#include "cryptlib.h"
-#include <openssl/evp.h>
-#include <openssl/objects.h>
-
-static int null_init_key(EVP_CIPHER_CTX *ctx, const unsigned char *key,
-	const unsigned char *iv,int enc);
-static int null_cipher(EVP_CIPHER_CTX *ctx, unsigned char *out,
-	const unsigned char *in, unsigned int inl);
-static const EVP_CIPHER n_cipher=
-	{
-	NID_undef,
-	1,0,0,
-	0,
-	null_init_key,
-	null_cipher,
-	NULL,
-	0,
-	NULL,
-	NULL,
-	NULL,
-	NULL
-	};
-
-const EVP_CIPHER *EVP_enc_null(void)
-	{
-	return(&n_cipher);
-	}
-
-static int null_init_key(EVP_CIPHER_CTX *ctx, const unsigned char *key,
-	     const unsigned char *iv, int enc)
-	{
-	/*	memset(&(ctx->c),0,sizeof(ctx->c));*/
-	return 1;
-	}
-
-static int null_cipher(EVP_CIPHER_CTX *ctx, unsigned char *out,
-	     const unsigned char *in, unsigned int inl)
-	{
-	if (in != out)
-		memcpy((char *)out,(const char *)in,(size_t)inl);
-	return 1;
-	}
-
diff --git a/crypto/openssl/crypto/evp/e_old.c b/crypto/openssl/crypto/evp/e_old.c
deleted file mode 100644
index 1642af4869d0..000000000000
--- a/crypto/openssl/crypto/evp/e_old.c
+++ /dev/null
@@ -1,125 +0,0 @@
-/* crypto/evp/e_old.c -*- mode:C; c-file-style: "eay" -*- */
-/* Written by Richard Levitte (richard@levitte.org) for the OpenSSL
- * project 2004.
- */
-/* ====================================================================
- * Copyright (c) 2004 The OpenSSL Project.  All rights reserved.
- *
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions
- * are met:
- *
- * 1. Redistributions of source code must retain the above copyright
- *    notice, this list of conditions and the following disclaimer. 
- *
- * 2. Redistributions in binary form must reproduce the above copyright
- *    notice, this list of conditions and the following disclaimer in
- *    the documentation and/or other materials provided with the
- *    distribution.
- *
- * 3. All advertising materials mentioning features or use of this
- *    software must display the following acknowledgment:
- *    "This product includes software developed by the OpenSSL Project
- *    for use in the OpenSSL Toolkit. (http://www.openssl.org/)"
- *
- * 4. The names "OpenSSL Toolkit" and "OpenSSL Project" must not be used to
- *    endorse or promote products derived from this software without
- *    prior written permission. For written permission, please contact
- *    openssl-core@openssl.org.
- *
- * 5. Products derived from this software may not be called "OpenSSL"
- *    nor may "OpenSSL" appear in their names without prior written
- *    permission of the OpenSSL Project.
- *
- * 6. Redistributions of any form whatsoever must retain the following
- *    acknowledgment:
- *    "This product includes software developed by the OpenSSL Project
- *    for use in the OpenSSL Toolkit (http://www.openssl.org/)"
- *
- * THIS SOFTWARE IS PROVIDED BY THE OpenSSL PROJECT ``AS IS'' AND ANY
- * EXPRESSED OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
- * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR
- * PURPOSE ARE DISCLAIMED.  IN NO EVENT SHALL THE OpenSSL PROJECT OR
- * ITS CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
- * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
- * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
- * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
- * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
- * STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
- * ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED
- * OF THE POSSIBILITY OF SUCH DAMAGE.
- * ====================================================================
- *
- * This product includes cryptographic software written by Eric Young
- * (eay@cryptsoft.com).  This product includes software written by Tim
- * Hudson (tjh@cryptsoft.com).
- *
- */
-
-#ifdef OPENSSL_NO_DEPRECATED
-static void *dummy = &dummy;
-#else
-
-#include <openssl/evp.h>
-
-/* Define some deprecated functions, so older programs
-   don't crash and burn too quickly.  On Windows and VMS,
-   these will never be used, since functions and variables
-   in shared libraries are selected by entry point location,
-   not by name.  */
-
-#ifndef OPENSSL_NO_BF
-#undef EVP_bf_cfb
-const EVP_CIPHER *EVP_bf_cfb(void);
-const EVP_CIPHER *EVP_bf_cfb(void) { return EVP_bf_cfb64(); }
-#endif
-
-#ifndef OPENSSL_NO_DES
-#undef EVP_des_cfb
-const EVP_CIPHER *EVP_des_cfb(void);
-const EVP_CIPHER *EVP_des_cfb(void) { return EVP_des_cfb64(); }
-#undef EVP_des_ede3_cfb
-const EVP_CIPHER *EVP_des_ede3_cfb(void);
-const EVP_CIPHER *EVP_des_ede3_cfb(void) { return EVP_des_ede3_cfb64(); }
-#undef EVP_des_ede_cfb
-const EVP_CIPHER *EVP_des_ede_cfb(void);
-const EVP_CIPHER *EVP_des_ede_cfb(void) { return EVP_des_ede_cfb64(); }
-#endif
-
-#ifndef OPENSSL_NO_IDEA
-#undef EVP_idea_cfb
-const EVP_CIPHER *EVP_idea_cfb(void);
-const EVP_CIPHER *EVP_idea_cfb(void) { return EVP_idea_cfb64(); }
-#endif
-
-#ifndef OPENSSL_NO_RC2
-#undef EVP_rc2_cfb
-const EVP_CIPHER *EVP_rc2_cfb(void);
-const EVP_CIPHER *EVP_rc2_cfb(void) { return EVP_rc2_cfb64(); }
-#endif
-
-#ifndef OPENSSL_NO_CAST
-#undef EVP_cast5_cfb
-const EVP_CIPHER *EVP_cast5_cfb(void);
-const EVP_CIPHER *EVP_cast5_cfb(void) { return EVP_cast5_cfb64(); }
-#endif
-
-#ifndef OPENSSL_NO_RC5
-#undef EVP_rc5_32_12_16_cfb
-const EVP_CIPHER *EVP_rc5_32_12_16_cfb(void);
-const EVP_CIPHER *EVP_rc5_32_12_16_cfb(void) { return EVP_rc5_32_12_16_cfb64(); }
-#endif
-
-#ifndef OPENSSL_NO_AES
-#undef EVP_aes_128_cfb
-const EVP_CIPHER *EVP_aes_128_cfb(void);
-const EVP_CIPHER *EVP_aes_128_cfb(void) { return EVP_aes_128_cfb128(); }
-#undef EVP_aes_192_cfb
-const EVP_CIPHER *EVP_aes_192_cfb(void);
-const EVP_CIPHER *EVP_aes_192_cfb(void) { return EVP_aes_192_cfb128(); }
-#undef EVP_aes_256_cfb
-const EVP_CIPHER *EVP_aes_256_cfb(void);
-const EVP_CIPHER *EVP_aes_256_cfb(void) { return EVP_aes_256_cfb128(); }
-#endif
-
-#endif
diff --git a/crypto/openssl/crypto/evp/e_rc2.c b/crypto/openssl/crypto/evp/e_rc2.c
deleted file mode 100644
index d37726ffae4b..000000000000
--- a/crypto/openssl/crypto/evp/e_rc2.c
+++ /dev/null
@@ -1,232 +0,0 @@
-/* crypto/evp/e_rc2.c */
-/* Copyright (C) 1995-1998 Eric Young (eay@cryptsoft.com)
- * All rights reserved.
- *
- * This package is an SSL implementation written
- * by Eric Young (eay@cryptsoft.com).
- * The implementation was written so as to conform with Netscapes SSL.
- * 
- * This library is free for commercial and non-commercial use as long as
- * the following conditions are aheared to.  The following conditions
- * apply to all code found in this distribution, be it the RC4, RSA,
- * lhash, DES, etc., code; not just the SSL code.  The SSL documentation
- * included with this distribution is covered by the same copyright terms
- * except that the holder is Tim Hudson (tjh@cryptsoft.com).
- * 
- * Copyright remains Eric Young's, and as such any Copyright notices in
- * the code are not to be removed.
- * If this package is used in a product, Eric Young should be given attribution
- * as the author of the parts of the library used.
- * This can be in the form of a textual message at program startup or
- * in documentation (online or textual) provided with the package.
- * 
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions
- * are met:
- * 1. Redistributions of source code must retain the copyright
- *    notice, this list of conditions and the following disclaimer.
- * 2. Redistributions in binary form must reproduce the above copyright
- *    notice, this list of conditions and the following disclaimer in the
- *    documentation and/or other materials provided with the distribution.
- * 3. All advertising materials mentioning features or use of this software
- *    must display the following acknowledgement:
- *    "This product includes cryptographic software written by
- *     Eric Young (eay@cryptsoft.com)"
- *    The word 'cryptographic' can be left out if the rouines from the library
- *    being used are not cryptographic related :-).
- * 4. If you include any Windows specific code (or a derivative thereof) from 
- *    the apps directory (application code) you must include an acknowledgement:
- *    "This product includes software written by Tim Hudson (tjh@cryptsoft.com)"
- * 
- * THIS SOFTWARE IS PROVIDED BY ERIC YOUNG ``AS IS'' AND
- * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
- * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
- * ARE DISCLAIMED.  IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE
- * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
- * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
- * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
- * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
- * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
- * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
- * SUCH DAMAGE.
- * 
- * The licence and distribution terms for any publically available version or
- * derivative of this code cannot be changed.  i.e. this code cannot simply be
- * copied and put under another distribution licence
- * [including the GNU Public Licence.]
- */
-
-#include <stdio.h>
-#include "cryptlib.h"
-
-#ifndef OPENSSL_NO_RC2
-
-#include <openssl/evp.h>
-#include <openssl/objects.h>
-#include "evp_locl.h"
-#include <openssl/rc2.h>
-
-static int rc2_init_key(EVP_CIPHER_CTX *ctx, const unsigned char *key,
-			const unsigned char *iv,int enc);
-static int rc2_meth_to_magic(EVP_CIPHER_CTX *ctx);
-static int rc2_magic_to_meth(int i);
-static int rc2_set_asn1_type_and_iv(EVP_CIPHER_CTX *c, ASN1_TYPE *type);
-static int rc2_get_asn1_type_and_iv(EVP_CIPHER_CTX *c, ASN1_TYPE *type);
-static int rc2_ctrl(EVP_CIPHER_CTX *c, int type, int arg, void *ptr);
-
-typedef struct
-	{
-	int key_bits;	/* effective key bits */
-	RC2_KEY ks;	/* key schedule */
-	} EVP_RC2_KEY;
-
-#define data(ctx)	((EVP_RC2_KEY *)(ctx)->cipher_data)
-
-IMPLEMENT_BLOCK_CIPHER(rc2, ks, RC2, EVP_RC2_KEY, NID_rc2,
-			8,
-			RC2_KEY_LENGTH, 8, 64,
-			EVP_CIPH_VARIABLE_LENGTH | EVP_CIPH_CTRL_INIT,
-			rc2_init_key, NULL,
-			rc2_set_asn1_type_and_iv, rc2_get_asn1_type_and_iv, 
-			rc2_ctrl)
-
-#define RC2_40_MAGIC	0xa0
-#define RC2_64_MAGIC	0x78
-#define RC2_128_MAGIC	0x3a
-
-static const EVP_CIPHER r2_64_cbc_cipher=
-	{
-	NID_rc2_64_cbc,
-	8,8 /* 64 bit */,8,
-	EVP_CIPH_CBC_MODE | EVP_CIPH_VARIABLE_LENGTH | EVP_CIPH_CTRL_INIT,
-	rc2_init_key,
-	rc2_cbc_cipher,
-	NULL,
-	sizeof(EVP_RC2_KEY),
-	rc2_set_asn1_type_and_iv,
-	rc2_get_asn1_type_and_iv,
-	rc2_ctrl,
-	NULL
-	};
-
-static const EVP_CIPHER r2_40_cbc_cipher=
-	{
-	NID_rc2_40_cbc,
-	8,5 /* 40 bit */,8,
-	EVP_CIPH_CBC_MODE | EVP_CIPH_VARIABLE_LENGTH | EVP_CIPH_CTRL_INIT,
-	rc2_init_key,
-	rc2_cbc_cipher,
-	NULL,
-	sizeof(EVP_RC2_KEY),
-	rc2_set_asn1_type_and_iv,
-	rc2_get_asn1_type_and_iv,
-	rc2_ctrl,
-	NULL
-	};
-
-const EVP_CIPHER *EVP_rc2_64_cbc(void)
-	{
-	return(&r2_64_cbc_cipher);
-	}
-
-const EVP_CIPHER *EVP_rc2_40_cbc(void)
-	{
-	return(&r2_40_cbc_cipher);
-	}
-	
-static int rc2_init_key(EVP_CIPHER_CTX *ctx, const unsigned char *key,
-			const unsigned char *iv, int enc)
-	{
-	RC2_set_key(&data(ctx)->ks,EVP_CIPHER_CTX_key_length(ctx),
-		    key,data(ctx)->key_bits);
-	return 1;
-	}
-
-static int rc2_meth_to_magic(EVP_CIPHER_CTX *e)
-	{
-	int i;
-
-	EVP_CIPHER_CTX_ctrl(e, EVP_CTRL_GET_RC2_KEY_BITS, 0, &i);
-	if 	(i == 128) return(RC2_128_MAGIC);
-	else if (i == 64)  return(RC2_64_MAGIC);
-	else if (i == 40)  return(RC2_40_MAGIC);
-	else return(0);
-	}
-
-static int rc2_magic_to_meth(int i)
-	{
-	if      (i == RC2_128_MAGIC) return 128;
-	else if (i == RC2_64_MAGIC)  return 64;
-	else if (i == RC2_40_MAGIC)  return 40;
-	else
-		{
-		EVPerr(EVP_F_RC2_MAGIC_TO_METH,EVP_R_UNSUPPORTED_KEY_SIZE);
-		return(0);
-		}
-	}
-
-static int rc2_get_asn1_type_and_iv(EVP_CIPHER_CTX *c, ASN1_TYPE *type)
-	{
-	long num=0;
-	int i=0;
-	int key_bits;
-	unsigned int l;
-	unsigned char iv[EVP_MAX_IV_LENGTH];
-
-	if (type != NULL)
-		{
-		l=EVP_CIPHER_CTX_iv_length(c);
-		OPENSSL_assert(l <= sizeof(iv));
-		i=ASN1_TYPE_get_int_octetstring(type,&num,iv,l);
-		if (i != (int)l)
-			return(-1);
-		key_bits =rc2_magic_to_meth((int)num);
-		if (!key_bits)
-			return(-1);
-		if(i > 0) EVP_CipherInit_ex(c, NULL, NULL, NULL, iv, -1);
-		EVP_CIPHER_CTX_ctrl(c, EVP_CTRL_SET_RC2_KEY_BITS, key_bits, NULL);
-		EVP_CIPHER_CTX_set_key_length(c, key_bits / 8);
-		}
-	return(i);
-	}
-
-static int rc2_set_asn1_type_and_iv(EVP_CIPHER_CTX *c, ASN1_TYPE *type)
-	{
-	long num;
-	int i=0,j;
-
-	if (type != NULL)
-		{
-		num=rc2_meth_to_magic(c);
-		j=EVP_CIPHER_CTX_iv_length(c);
-		i=ASN1_TYPE_set_int_octetstring(type,num,c->oiv,j);
-		}
-	return(i);
-	}
-
-static int rc2_ctrl(EVP_CIPHER_CTX *c, int type, int arg, void *ptr)
-	{
-	switch(type)
-		{
-	case EVP_CTRL_INIT:
-		data(c)->key_bits = EVP_CIPHER_CTX_key_length(c) * 8;
-		return 1;
-
-	case EVP_CTRL_GET_RC2_KEY_BITS:
-		*(int *)ptr = data(c)->key_bits;
-		return 1;
-			
-	case EVP_CTRL_SET_RC2_KEY_BITS:
-		if(arg > 0)
-			{
-			data(c)->key_bits = arg;
-			return 1;
-			}
-		return 0;
-
-	default:
-		return -1;
-		}
-	}
-
-#endif
diff --git a/crypto/openssl/crypto/evp/e_rc4.c b/crypto/openssl/crypto/evp/e_rc4.c
deleted file mode 100644
index 67af850bea1a..000000000000
--- a/crypto/openssl/crypto/evp/e_rc4.c
+++ /dev/null
@@ -1,136 +0,0 @@
-/* crypto/evp/e_rc4.c */
-/* Copyright (C) 1995-1998 Eric Young (eay@cryptsoft.com)
- * All rights reserved.
- *
- * This package is an SSL implementation written
- * by Eric Young (eay@cryptsoft.com).
- * The implementation was written so as to conform with Netscapes SSL.
- * 
- * This library is free for commercial and non-commercial use as long as
- * the following conditions are aheared to.  The following conditions
- * apply to all code found in this distribution, be it the RC4, RSA,
- * lhash, DES, etc., code; not just the SSL code.  The SSL documentation
- * included with this distribution is covered by the same copyright terms
- * except that the holder is Tim Hudson (tjh@cryptsoft.com).
- * 
- * Copyright remains Eric Young's, and as such any Copyright notices in
- * the code are not to be removed.
- * If this package is used in a product, Eric Young should be given attribution
- * as the author of the parts of the library used.
- * This can be in the form of a textual message at program startup or
- * in documentation (online or textual) provided with the package.
- * 
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions
- * are met:
- * 1. Redistributions of source code must retain the copyright
- *    notice, this list of conditions and the following disclaimer.
- * 2. Redistributions in binary form must reproduce the above copyright
- *    notice, this list of conditions and the following disclaimer in the
- *    documentation and/or other materials provided with the distribution.
- * 3. All advertising materials mentioning features or use of this software
- *    must display the following acknowledgement:
- *    "This product includes cryptographic software written by
- *     Eric Young (eay@cryptsoft.com)"
- *    The word 'cryptographic' can be left out if the rouines from the library
- *    being used are not cryptographic related :-).
- * 4. If you include any Windows specific code (or a derivative thereof) from 
- *    the apps directory (application code) you must include an acknowledgement:
- *    "This product includes software written by Tim Hudson (tjh@cryptsoft.com)"
- * 
- * THIS SOFTWARE IS PROVIDED BY ERIC YOUNG ``AS IS'' AND
- * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
- * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
- * ARE DISCLAIMED.  IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE
- * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
- * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
- * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
- * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
- * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
- * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
- * SUCH DAMAGE.
- * 
- * The licence and distribution terms for any publically available version or
- * derivative of this code cannot be changed.  i.e. this code cannot simply be
- * copied and put under another distribution licence
- * [including the GNU Public Licence.]
- */
-
-#include <stdio.h>
-#include "cryptlib.h"
-
-#ifndef OPENSSL_NO_RC4
-
-#include <openssl/evp.h>
-#include <openssl/objects.h>
-#include <openssl/rc4.h>
-
-/* FIXME: surely this is available elsewhere? */
-#define EVP_RC4_KEY_SIZE		16
-
-typedef struct
-    {
-    RC4_KEY ks;	/* working key */
-    } EVP_RC4_KEY;
-
-#define data(ctx) ((EVP_RC4_KEY *)(ctx)->cipher_data)
-
-static int rc4_init_key(EVP_CIPHER_CTX *ctx, const unsigned char *key,
-			const unsigned char *iv,int enc);
-static int rc4_cipher(EVP_CIPHER_CTX *ctx, unsigned char *out,
-		      const unsigned char *in, unsigned int inl);
-static const EVP_CIPHER r4_cipher=
-	{
-	NID_rc4,
-	1,EVP_RC4_KEY_SIZE,0,
-	EVP_CIPH_VARIABLE_LENGTH,
-	rc4_init_key,
-	rc4_cipher,
-	NULL,
-	sizeof(EVP_RC4_KEY),
-	NULL,
-	NULL,
-	NULL,
-	NULL
-	};
-
-static const EVP_CIPHER r4_40_cipher=
-	{
-	NID_rc4_40,
-	1,5 /* 40 bit */,0,
-	EVP_CIPH_VARIABLE_LENGTH,
-	rc4_init_key,
-	rc4_cipher,
-	NULL,
-	sizeof(EVP_RC4_KEY),
-	NULL, 
-	NULL,
-	NULL,
-	NULL
-	};
-
-const EVP_CIPHER *EVP_rc4(void)
-	{
-	return(&r4_cipher);
-	}
-
-const EVP_CIPHER *EVP_rc4_40(void)
-	{
-	return(&r4_40_cipher);
-	}
-
-static int rc4_init_key(EVP_CIPHER_CTX *ctx, const unsigned char *key,
-			const unsigned char *iv, int enc)
-	{
-	RC4_set_key(&data(ctx)->ks,EVP_CIPHER_CTX_key_length(ctx),
-		    key);
-	return 1;
-	}
-
-static int rc4_cipher(EVP_CIPHER_CTX *ctx, unsigned char *out,
-		      const unsigned char *in, unsigned int inl)
-	{
-	RC4(&data(ctx)->ks,inl,in,out);
-	return 1;
-	}
-#endif
diff --git a/crypto/openssl/crypto/evp/e_rc5.c b/crypto/openssl/crypto/evp/e_rc5.c
deleted file mode 100644
index 19a10c640245..000000000000
--- a/crypto/openssl/crypto/evp/e_rc5.c
+++ /dev/null
@@ -1,126 +0,0 @@
-/* crypto/evp/e_rc5.c */
-/* Copyright (C) 1995-1998 Eric Young (eay@cryptsoft.com)
- * All rights reserved.
- *
- * This package is an SSL implementation written
- * by Eric Young (eay@cryptsoft.com).
- * The implementation was written so as to conform with Netscapes SSL.
- * 
- * This library is free for commercial and non-commercial use as long as
- * the following conditions are aheared to.  The following conditions
- * apply to all code found in this distribution, be it the RC4, RSA,
- * lhash, DES, etc., code; not just the SSL code.  The SSL documentation
- * included with this distribution is covered by the same copyright terms
- * except that the holder is Tim Hudson (tjh@cryptsoft.com).
- * 
- * Copyright remains Eric Young's, and as such any Copyright notices in
- * the code are not to be removed.
- * If this package is used in a product, Eric Young should be given attribution
- * as the author of the parts of the library used.
- * This can be in the form of a textual message at program startup or
- * in documentation (online or textual) provided with the package.
- * 
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions
- * are met:
- * 1. Redistributions of source code must retain the copyright
- *    notice, this list of conditions and the following disclaimer.
- * 2. Redistributions in binary form must reproduce the above copyright
- *    notice, this list of conditions and the following disclaimer in the
- *    documentation and/or other materials provided with the distribution.
- * 3. All advertising materials mentioning features or use of this software
- *    must display the following acknowledgement:
- *    "This product includes cryptographic software written by
- *     Eric Young (eay@cryptsoft.com)"
- *    The word 'cryptographic' can be left out if the rouines from the library
- *    being used are not cryptographic related :-).
- * 4. If you include any Windows specific code (or a derivative thereof) from 
- *    the apps directory (application code) you must include an acknowledgement:
- *    "This product includes software written by Tim Hudson (tjh@cryptsoft.com)"
- * 
- * THIS SOFTWARE IS PROVIDED BY ERIC YOUNG ``AS IS'' AND
- * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
- * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
- * ARE DISCLAIMED.  IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE
- * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
- * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
- * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
- * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
- * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
- * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
- * SUCH DAMAGE.
- * 
- * The licence and distribution terms for any publically available version or
- * derivative of this code cannot be changed.  i.e. this code cannot simply be
- * copied and put under another distribution licence
- * [including the GNU Public Licence.]
- */
-
-#include <stdio.h>
-#include "cryptlib.h"
-
-#ifndef OPENSSL_NO_RC5
-
-#include <openssl/evp.h>
-#include <openssl/objects.h>
-#include "evp_locl.h"
-#include <openssl/rc5.h>
-
-static int r_32_12_16_init_key(EVP_CIPHER_CTX *ctx, const unsigned char *key,
-			       const unsigned char *iv,int enc);
-static int rc5_ctrl(EVP_CIPHER_CTX *c, int type, int arg, void *ptr);
-
-typedef struct
-	{
-	int rounds;	/* number of rounds */
-	RC5_32_KEY ks;	/* key schedule */
-	} EVP_RC5_KEY;
-
-#define data(ctx)	EVP_C_DATA(EVP_RC5_KEY,ctx)
-
-IMPLEMENT_BLOCK_CIPHER(rc5_32_12_16, ks, RC5_32, EVP_RC5_KEY, NID_rc5,
-		       8, RC5_32_KEY_LENGTH, 8, 64,
-		       EVP_CIPH_VARIABLE_LENGTH | EVP_CIPH_CTRL_INIT,
-		       r_32_12_16_init_key, NULL,
-		       NULL, NULL, rc5_ctrl)
-
-static int rc5_ctrl(EVP_CIPHER_CTX *c, int type, int arg, void *ptr)
-	{
-	switch(type)
-		{
-	case EVP_CTRL_INIT:
-		data(c)->rounds = RC5_12_ROUNDS;
-		return 1;
-
-	case EVP_CTRL_GET_RC5_ROUNDS:
-		*(int *)ptr = data(c)->rounds;
-		return 1;
-			
-	case EVP_CTRL_SET_RC5_ROUNDS:
-		switch(arg)
-			{
-		case RC5_8_ROUNDS:
-		case RC5_12_ROUNDS:
-		case RC5_16_ROUNDS:
-			data(c)->rounds = arg;
-			return 1;
-
-		default:
-			EVPerr(EVP_F_RC5_CTRL, EVP_R_UNSUPORTED_NUMBER_OF_ROUNDS);
-			return 0;
-			}
-
-	default:
-		return -1;
-		}
-	}
-
-static int r_32_12_16_init_key(EVP_CIPHER_CTX *ctx, const unsigned char *key,
-			       const unsigned char *iv, int enc)
-	{
-	RC5_32_set_key(&data(ctx)->ks,EVP_CIPHER_CTX_key_length(ctx),
-		       key,data(ctx)->rounds);
-	return 1;
-	}
-
-#endif
diff --git a/crypto/openssl/crypto/evp/e_xcbc_d.c b/crypto/openssl/crypto/evp/e_xcbc_d.c
deleted file mode 100644
index 8832da24333c..000000000000
--- a/crypto/openssl/crypto/evp/e_xcbc_d.c
+++ /dev/null
@@ -1,125 +0,0 @@
-/* crypto/evp/e_xcbc_d.c */
-/* Copyright (C) 1995-1998 Eric Young (eay@cryptsoft.com)
- * All rights reserved.
- *
- * This package is an SSL implementation written
- * by Eric Young (eay@cryptsoft.com).
- * The implementation was written so as to conform with Netscapes SSL.
- * 
- * This library is free for commercial and non-commercial use as long as
- * the following conditions are aheared to.  The following conditions
- * apply to all code found in this distribution, be it the RC4, RSA,
- * lhash, DES, etc., code; not just the SSL code.  The SSL documentation
- * included with this distribution is covered by the same copyright terms
- * except that the holder is Tim Hudson (tjh@cryptsoft.com).
- * 
- * Copyright remains Eric Young's, and as such any Copyright notices in
- * the code are not to be removed.
- * If this package is used in a product, Eric Young should be given attribution
- * as the author of the parts of the library used.
- * This can be in the form of a textual message at program startup or
- * in documentation (online or textual) provided with the package.
- * 
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions
- * are met:
- * 1. Redistributions of source code must retain the copyright
- *    notice, this list of conditions and the following disclaimer.
- * 2. Redistributions in binary form must reproduce the above copyright
- *    notice, this list of conditions and the following disclaimer in the
- *    documentation and/or other materials provided with the distribution.
- * 3. All advertising materials mentioning features or use of this software
- *    must display the following acknowledgement:
- *    "This product includes cryptographic software written by
- *     Eric Young (eay@cryptsoft.com)"
- *    The word 'cryptographic' can be left out if the rouines from the library
- *    being used are not cryptographic related :-).
- * 4. If you include any Windows specific code (or a derivative thereof) from 
- *    the apps directory (application code) you must include an acknowledgement:
- *    "This product includes software written by Tim Hudson (tjh@cryptsoft.com)"
- * 
- * THIS SOFTWARE IS PROVIDED BY ERIC YOUNG ``AS IS'' AND
- * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
- * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
- * ARE DISCLAIMED.  IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE
- * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
- * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
- * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
- * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
- * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
- * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
- * SUCH DAMAGE.
- * 
- * The licence and distribution terms for any publically available version or
- * derivative of this code cannot be changed.  i.e. this code cannot simply be
- * copied and put under another distribution licence
- * [including the GNU Public Licence.]
- */
-
-#include <stdio.h>
-#include "cryptlib.h"
-
-#ifndef OPENSSL_NO_DES
-
-#include <openssl/evp.h>
-#include <openssl/objects.h>
-#include <openssl/des.h>
-
-static int desx_cbc_init_key(EVP_CIPHER_CTX *ctx, const unsigned char *key,
-			     const unsigned char *iv,int enc);
-static int desx_cbc_cipher(EVP_CIPHER_CTX *ctx, unsigned char *out,
-			   const unsigned char *in, unsigned int inl);
-
-
-typedef struct
-    {
-    DES_key_schedule ks;/* key schedule */
-    DES_cblock inw;
-    DES_cblock outw;
-    } DESX_CBC_KEY;
-
-#define data(ctx) ((DESX_CBC_KEY *)(ctx)->cipher_data)
-
-static const EVP_CIPHER d_xcbc_cipher=
-	{
-	NID_desx_cbc,
-	8,24,8,
-	EVP_CIPH_CBC_MODE,
-	desx_cbc_init_key,
-	desx_cbc_cipher,
-	NULL,
-	sizeof(DESX_CBC_KEY),
-	EVP_CIPHER_set_asn1_iv,
-	EVP_CIPHER_get_asn1_iv,
-	NULL,
-	NULL
-	};
-
-const EVP_CIPHER *EVP_desx_cbc(void)
-	{
-	return(&d_xcbc_cipher);
-	}
-	
-static int desx_cbc_init_key(EVP_CIPHER_CTX *ctx, const unsigned char *key,
-			     const unsigned char *iv, int enc)
-	{
-	DES_cblock *deskey = (DES_cblock *)key;
-
-	DES_set_key_unchecked(deskey,&data(ctx)->ks);
-	memcpy(&data(ctx)->inw[0],&key[8],8);
-	memcpy(&data(ctx)->outw[0],&key[16],8);
-
-	return 1;
-	}
-
-static int desx_cbc_cipher(EVP_CIPHER_CTX *ctx, unsigned char *out,
-			   const unsigned char *in, unsigned int inl)
-	{
-	DES_xcbc_encrypt(in,out,inl,&data(ctx)->ks,
-			 (DES_cblock *)&(ctx->iv[0]),
-			 &data(ctx)->inw,
-			 &data(ctx)->outw,
-			 ctx->encrypt);
-	return 1;
-	}
-#endif
diff --git a/crypto/openssl/crypto/evp/encode.c b/crypto/openssl/crypto/evp/encode.c
deleted file mode 100644
index 5921f0d710d8..000000000000
--- a/crypto/openssl/crypto/evp/encode.c
+++ /dev/null
@@ -1,446 +0,0 @@
-/* crypto/evp/encode.c */
-/* Copyright (C) 1995-1998 Eric Young (eay@cryptsoft.com)
- * All rights reserved.
- *
- * This package is an SSL implementation written
- * by Eric Young (eay@cryptsoft.com).
- * The implementation was written so as to conform with Netscapes SSL.
- * 
- * This library is free for commercial and non-commercial use as long as
- * the following conditions are aheared to.  The following conditions
- * apply to all code found in this distribution, be it the RC4, RSA,
- * lhash, DES, etc., code; not just the SSL code.  The SSL documentation
- * included with this distribution is covered by the same copyright terms
- * except that the holder is Tim Hudson (tjh@cryptsoft.com).
- * 
- * Copyright remains Eric Young's, and as such any Copyright notices in
- * the code are not to be removed.
- * If this package is used in a product, Eric Young should be given attribution
- * as the author of the parts of the library used.
- * This can be in the form of a textual message at program startup or
- * in documentation (online or textual) provided with the package.
- * 
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions
- * are met:
- * 1. Redistributions of source code must retain the copyright
- *    notice, this list of conditions and the following disclaimer.
- * 2. Redistributions in binary form must reproduce the above copyright
- *    notice, this list of conditions and the following disclaimer in the
- *    documentation and/or other materials provided with the distribution.
- * 3. All advertising materials mentioning features or use of this software
- *    must display the following acknowledgement:
- *    "This product includes cryptographic software written by
- *     Eric Young (eay@cryptsoft.com)"
- *    The word 'cryptographic' can be left out if the rouines from the library
- *    being used are not cryptographic related :-).
- * 4. If you include any Windows specific code (or a derivative thereof) from 
- *    the apps directory (application code) you must include an acknowledgement:
- *    "This product includes software written by Tim Hudson (tjh@cryptsoft.com)"
- * 
- * THIS SOFTWARE IS PROVIDED BY ERIC YOUNG ``AS IS'' AND
- * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
- * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
- * ARE DISCLAIMED.  IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE
- * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
- * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
- * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
- * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
- * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
- * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
- * SUCH DAMAGE.
- * 
- * The licence and distribution terms for any publically available version or
- * derivative of this code cannot be changed.  i.e. this code cannot simply be
- * copied and put under another distribution licence
- * [including the GNU Public Licence.]
- */
-
-#include <stdio.h>
-#include "cryptlib.h"
-#include <openssl/evp.h>
-
-#ifndef CHARSET_EBCDIC
-#define conv_bin2ascii(a)	(data_bin2ascii[(a)&0x3f])
-#define conv_ascii2bin(a)	(data_ascii2bin[(a)&0x7f])
-#else
-/* We assume that PEM encoded files are EBCDIC files
- * (i.e., printable text files). Convert them here while decoding.
- * When encoding, output is EBCDIC (text) format again.
- * (No need for conversion in the conv_bin2ascii macro, as the
- * underlying textstring data_bin2ascii[] is already EBCDIC)
- */
-#define conv_bin2ascii(a)	(data_bin2ascii[(a)&0x3f])
-#define conv_ascii2bin(a)	(data_ascii2bin[os_toascii[a]&0x7f])
-#endif
-
-/* 64 char lines
- * pad input with 0
- * left over chars are set to =
- * 1 byte  => xx==
- * 2 bytes => xxx=
- * 3 bytes => xxxx
- */
-#define BIN_PER_LINE    (64/4*3)
-#define CHUNKS_PER_LINE (64/4)
-#define CHAR_PER_LINE   (64+1)
-
-static unsigned char data_bin2ascii[65]="ABCDEFGHIJKLMNOPQRSTUVWXYZ\
-abcdefghijklmnopqrstuvwxyz0123456789+/";
-
-/* 0xF0 is a EOLN
- * 0xF1 is ignore but next needs to be 0xF0 (for \r\n processing).
- * 0xF2 is EOF
- * 0xE0 is ignore at start of line.
- * 0xFF is error
- */
-
-#define B64_EOLN		0xF0
-#define B64_CR			0xF1
-#define B64_EOF			0xF2
-#define B64_WS			0xE0
-#define B64_ERROR       	0xFF
-#define B64_NOT_BASE64(a)	(((a)|0x13) == 0xF3)
-
-static unsigned char data_ascii2bin[128]={
-	0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,
-	0xFF,0xE0,0xF0,0xFF,0xFF,0xF1,0xFF,0xFF,
-	0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,
-	0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,
-	0xE0,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,
-	0xFF,0xFF,0xFF,0x3E,0xFF,0xF2,0xFF,0x3F,
-	0x34,0x35,0x36,0x37,0x38,0x39,0x3A,0x3B,
-	0x3C,0x3D,0xFF,0xFF,0xFF,0x00,0xFF,0xFF,
-	0xFF,0x00,0x01,0x02,0x03,0x04,0x05,0x06,
-	0x07,0x08,0x09,0x0A,0x0B,0x0C,0x0D,0x0E,
-	0x0F,0x10,0x11,0x12,0x13,0x14,0x15,0x16,
-	0x17,0x18,0x19,0xFF,0xFF,0xFF,0xFF,0xFF,
-	0xFF,0x1A,0x1B,0x1C,0x1D,0x1E,0x1F,0x20,
-	0x21,0x22,0x23,0x24,0x25,0x26,0x27,0x28,
-	0x29,0x2A,0x2B,0x2C,0x2D,0x2E,0x2F,0x30,
-	0x31,0x32,0x33,0xFF,0xFF,0xFF,0xFF,0xFF,
-	};
-
-void EVP_EncodeInit(EVP_ENCODE_CTX *ctx)
-	{
-	ctx->length=48;
-	ctx->num=0;
-	ctx->line_num=0;
-	}
-
-void EVP_EncodeUpdate(EVP_ENCODE_CTX *ctx, unsigned char *out, int *outl,
-	     const unsigned char *in, int inl)
-	{
-	int i,j;
-	unsigned int total=0;
-
-	*outl=0;
-	if (inl == 0) return;
-	OPENSSL_assert(ctx->length <= (int)sizeof(ctx->enc_data));
-	if ((ctx->num+inl) < ctx->length)
-		{
-		memcpy(&(ctx->enc_data[ctx->num]),in,inl);
-		ctx->num+=inl;
-		return;
-		}
-	if (ctx->num != 0)
-		{
-		i=ctx->length-ctx->num;
-		memcpy(&(ctx->enc_data[ctx->num]),in,i);
-		in+=i;
-		inl-=i;
-		j=EVP_EncodeBlock(out,ctx->enc_data,ctx->length);
-		ctx->num=0;
-		out+=j;
-		*(out++)='\n';
-		*out='\0';
-		total=j+1;
-		}
-	while (inl >= ctx->length)
-		{
-		j=EVP_EncodeBlock(out,in,ctx->length);
-		in+=ctx->length;
-		inl-=ctx->length;
-		out+=j;
-		*(out++)='\n';
-		*out='\0';
-		total+=j+1;
-		}
-	if (inl != 0)
-		memcpy(&(ctx->enc_data[0]),in,inl);
-	ctx->num=inl;
-	*outl=total;
-	}
-
-void EVP_EncodeFinal(EVP_ENCODE_CTX *ctx, unsigned char *out, int *outl)
-	{
-	unsigned int ret=0;
-
-	if (ctx->num != 0)
-		{
-		ret=EVP_EncodeBlock(out,ctx->enc_data,ctx->num);
-		out[ret++]='\n';
-		out[ret]='\0';
-		ctx->num=0;
-		}
-	*outl=ret;
-	}
-
-int EVP_EncodeBlock(unsigned char *t, const unsigned char *f, int dlen)
-	{
-	int i,ret=0;
-	unsigned long l;
-
-	for (i=dlen; i > 0; i-=3)
-		{
-		if (i >= 3)
-			{
-			l=	(((unsigned long)f[0])<<16L)|
-				(((unsigned long)f[1])<< 8L)|f[2];
-			*(t++)=conv_bin2ascii(l>>18L);
-			*(t++)=conv_bin2ascii(l>>12L);
-			*(t++)=conv_bin2ascii(l>> 6L);
-			*(t++)=conv_bin2ascii(l     );
-			}
-		else
-			{
-			l=((unsigned long)f[0])<<16L;
-			if (i == 2) l|=((unsigned long)f[1]<<8L);
-
-			*(t++)=conv_bin2ascii(l>>18L);
-			*(t++)=conv_bin2ascii(l>>12L);
-			*(t++)=(i == 1)?'=':conv_bin2ascii(l>> 6L);
-			*(t++)='=';
-			}
-		ret+=4;
-		f+=3;
-		}
-
-	*t='\0';
-	return(ret);
-	}
-
-void EVP_DecodeInit(EVP_ENCODE_CTX *ctx)
-	{
-	ctx->length=30;
-	ctx->num=0;
-	ctx->line_num=0;
-	ctx->expect_nl=0;
-	}
-
-/* -1 for error
- *  0 for last line
- *  1 for full line
- */
-int EVP_DecodeUpdate(EVP_ENCODE_CTX *ctx, unsigned char *out, int *outl,
-	     const unsigned char *in, int inl)
-	{
-	int seof= -1,eof=0,rv= -1,ret=0,i,v,tmp,n,ln,tmp2,exp_nl;
-	unsigned char *d;
-
-	n=ctx->num;
-	d=ctx->enc_data;
-	ln=ctx->line_num;
-	exp_nl=ctx->expect_nl;
-
-	/* last line of input. */
-	if ((inl == 0) || ((n == 0) && (conv_ascii2bin(in[0]) == B64_EOF)))
-		{ rv=0; goto end; }
-		
-	/* We parse the input data */
-	for (i=0; i<inl; i++)
-		{
-		/* If the current line is > 80 characters, scream alot */
-		if (ln >= 80) { rv= -1; goto end; }
-
-		/* Get char and put it into the buffer */
-		tmp= *(in++);
-		v=conv_ascii2bin(tmp);
-		/* only save the good data :-) */
-		if (!B64_NOT_BASE64(v))
-			{
-			OPENSSL_assert(n < (int)sizeof(ctx->enc_data));
-			d[n++]=tmp;
-			ln++;
-			}
-		else if (v == B64_ERROR)
-			{
-			rv= -1;
-			goto end;
-			}
-
-		/* have we seen a '=' which is 'definitly' the last
-		 * input line.  seof will point to the character that
-		 * holds it. and eof will hold how many characters to
-		 * chop off. */
-		if (tmp == '=')
-			{
-			if (seof == -1) seof=n;
-			eof++;
-			}
-
-		if (v == B64_CR)
-			{
-			ln = 0;
-			if (exp_nl)
-				continue;
-			}
-
-		/* eoln */
-		if (v == B64_EOLN)
-			{
-			ln=0;
-			if (exp_nl)
-				{
-				exp_nl=0;
-				continue;
-				}
-			}
-		exp_nl=0;
-
-		/* If we are at the end of input and it looks like a
-		 * line, process it. */
-		if (((i+1) == inl) && (((n&3) == 0) || eof))
-			{
-			v=B64_EOF;
-			/* In case things were given us in really small
-			   records (so two '=' were given in separate
-			   updates), eof may contain the incorrect number
-			   of ending bytes to skip, so let's redo the count */
-			eof = 0;
-			if (d[n-1] == '=') eof++;
-			if (d[n-2] == '=') eof++;
-			/* There will never be more than two '=' */
-			}
-
-		if ((v == B64_EOF && (n&3) == 0) || (n >= 64))
-			{
-			/* This is needed to work correctly on 64 byte input
-			 * lines.  We process the line and then need to
-			 * accept the '\n' */
-			if ((v != B64_EOF) && (n >= 64)) exp_nl=1;
-			tmp2=v;
-			if (n > 0)
-				{
-				v=EVP_DecodeBlock(out,d,n);
-				n=0;
-				if (v < 0) { rv=0; goto end; }
-				ret+=(v-eof);
-				}
-			else
-				{
-				eof=1;
-				v=0;
-				}
-
-			/* This is the case where we have had a short
-			 * but valid input line */
-			if ((v < ctx->length) && eof)
-				{
-				rv=0;
-				goto end;
-				}
-			else
-				ctx->length=v;
-
-			if (seof >= 0) { rv=0; goto end; }
-			out+=v;
-			}
-		}
-	rv=1;
-end:
-	*outl=ret;
-	ctx->num=n;
-	ctx->line_num=ln;
-	ctx->expect_nl=exp_nl;
-	return(rv);
-	}
-
-int EVP_DecodeBlock(unsigned char *t, const unsigned char *f, int n)
-	{
-	int i,ret=0,a,b,c,d;
-	unsigned long l;
-
-	/* trim white space from the start of the line. */
-	while ((conv_ascii2bin(*f) == B64_WS) && (n > 0))
-		{
-		f++;
-		n--;
-		}
-
-	/* strip off stuff at the end of the line
-	 * ascii2bin values B64_WS, B64_EOLN, B64_EOLN and B64_EOF */
-	while ((n > 3) && (B64_NOT_BASE64(conv_ascii2bin(f[n-1]))))
-		n--;
-
-	if (n%4 != 0) return(-1);
-
-	for (i=0; i<n; i+=4)
-		{
-		a=conv_ascii2bin(*(f++));
-		b=conv_ascii2bin(*(f++));
-		c=conv_ascii2bin(*(f++));
-		d=conv_ascii2bin(*(f++));
-		if (	(a & 0x80) || (b & 0x80) ||
-			(c & 0x80) || (d & 0x80))
-			return(-1);
-		l=(	(((unsigned long)a)<<18L)|
-			(((unsigned long)b)<<12L)|
-			(((unsigned long)c)<< 6L)|
-			(((unsigned long)d)     ));
-		*(t++)=(unsigned char)(l>>16L)&0xff;
-		*(t++)=(unsigned char)(l>> 8L)&0xff;
-		*(t++)=(unsigned char)(l     )&0xff;
-		ret+=3;
-		}
-	return(ret);
-	}
-
-int EVP_DecodeFinal(EVP_ENCODE_CTX *ctx, unsigned char *out, int *outl)
-	{
-	int i;
-
-	*outl=0;
-	if (ctx->num != 0)
-		{
-		i=EVP_DecodeBlock(out,ctx->enc_data,ctx->num);
-		if (i < 0) return(-1);
-		ctx->num=0;
-		*outl=i;
-		return(1);
-		}
-	else
-		return(1);
-	}
-
-#ifdef undef
-int EVP_DecodeValid(unsigned char *buf, int len)
-	{
-	int i,num=0,bad=0;
-
-	if (len == 0) return(-1);
-	while (conv_ascii2bin(*buf) == B64_WS)
-		{
-		buf++;
-		len--;
-		if (len == 0) return(-1);
-		}
-
-	for (i=len; i >= 4; i-=4)
-		{
-		if (	(conv_ascii2bin(buf[0]) >= 0x40) ||
-			(conv_ascii2bin(buf[1]) >= 0x40) ||
-			(conv_ascii2bin(buf[2]) >= 0x40) ||
-			(conv_ascii2bin(buf[3]) >= 0x40))
-			return(-1);
-		buf+=4;
-		num+=1+(buf[2] != '=')+(buf[3] != '=');
-		}
-	if ((i == 1) && (conv_ascii2bin(buf[0]) == B64_EOLN))
-		return(num);
-	if ((i == 2) && (conv_ascii2bin(buf[0]) == B64_EOLN) &&
-		(conv_ascii2bin(buf[0]) == B64_EOLN))
-		return(num);
-	return(1);
-	}
-#endif
diff --git a/crypto/openssl/crypto/evp/evp.h b/crypto/openssl/crypto/evp/evp.h
deleted file mode 100644
index 636f426c6996..000000000000
--- a/crypto/openssl/crypto/evp/evp.h
+++ /dev/null
@@ -1,970 +0,0 @@
-/* crypto/evp/evp.h */
-/* Copyright (C) 1995-1998 Eric Young (eay@cryptsoft.com)
- * All rights reserved.
- *
- * This package is an SSL implementation written
- * by Eric Young (eay@cryptsoft.com).
- * The implementation was written so as to conform with Netscapes SSL.
- * 
- * This library is free for commercial and non-commercial use as long as
- * the following conditions are aheared to.  The following conditions
- * apply to all code found in this distribution, be it the RC4, RSA,
- * lhash, DES, etc., code; not just the SSL code.  The SSL documentation
- * included with this distribution is covered by the same copyright terms
- * except that the holder is Tim Hudson (tjh@cryptsoft.com).
- * 
- * Copyright remains Eric Young's, and as such any Copyright notices in
- * the code are not to be removed.
- * If this package is used in a product, Eric Young should be given attribution
- * as the author of the parts of the library used.
- * This can be in the form of a textual message at program startup or
- * in documentation (online or textual) provided with the package.
- * 
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions
- * are met:
- * 1. Redistributions of source code must retain the copyright
- *    notice, this list of conditions and the following disclaimer.
- * 2. Redistributions in binary form must reproduce the above copyright
- *    notice, this list of conditions and the following disclaimer in the
- *    documentation and/or other materials provided with the distribution.
- * 3. All advertising materials mentioning features or use of this software
- *    must display the following acknowledgement:
- *    "This product includes cryptographic software written by
- *     Eric Young (eay@cryptsoft.com)"
- *    The word 'cryptographic' can be left out if the rouines from the library
- *    being used are not cryptographic related :-).
- * 4. If you include any Windows specific code (or a derivative thereof) from 
- *    the apps directory (application code) you must include an acknowledgement:
- *    "This product includes software written by Tim Hudson (tjh@cryptsoft.com)"
- * 
- * THIS SOFTWARE IS PROVIDED BY ERIC YOUNG ``AS IS'' AND
- * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
- * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
- * ARE DISCLAIMED.  IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE
- * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
- * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
- * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
- * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
- * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
- * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
- * SUCH DAMAGE.
- * 
- * The licence and distribution terms for any publically available version or
- * derivative of this code cannot be changed.  i.e. this code cannot simply be
- * copied and put under another distribution licence
- * [including the GNU Public Licence.]
- */
-
-#ifndef HEADER_ENVELOPE_H
-#define HEADER_ENVELOPE_H
-
-#ifdef OPENSSL_ALGORITHM_DEFINES
-# include <openssl/opensslconf.h>
-#else
-# define OPENSSL_ALGORITHM_DEFINES
-# include <openssl/opensslconf.h>
-# undef OPENSSL_ALGORITHM_DEFINES
-#endif
-
-#include <openssl/ossl_typ.h>
-
-#include <openssl/symhacks.h>
-
-#ifndef OPENSSL_NO_BIO
-#include <openssl/bio.h>
-#endif
-
-/*
-#define EVP_RC2_KEY_SIZE		16
-#define EVP_RC4_KEY_SIZE		16
-#define EVP_BLOWFISH_KEY_SIZE		16
-#define EVP_CAST5_KEY_SIZE		16
-#define EVP_RC5_32_12_16_KEY_SIZE	16
-*/
-#define EVP_MAX_MD_SIZE			64	/* longest known is SHA512 */
-#define EVP_MAX_KEY_LENGTH		32
-#define EVP_MAX_IV_LENGTH		16
-#define EVP_MAX_BLOCK_LENGTH		32
-
-#define PKCS5_SALT_LEN			8
-/* Default PKCS#5 iteration count */
-#define PKCS5_DEFAULT_ITER		2048
-
-#include <openssl/objects.h>
-
-#define EVP_PK_RSA	0x0001
-#define EVP_PK_DSA	0x0002
-#define EVP_PK_DH	0x0004
-#define EVP_PK_EC	0x0008
-#define EVP_PKT_SIGN	0x0010
-#define EVP_PKT_ENC	0x0020
-#define EVP_PKT_EXCH	0x0040
-#define EVP_PKS_RSA	0x0100
-#define EVP_PKS_DSA	0x0200
-#define EVP_PKS_EC	0x0400
-#define EVP_PKT_EXP	0x1000 /* <= 512 bit key */
-
-#define EVP_PKEY_NONE	NID_undef
-#define EVP_PKEY_RSA	NID_rsaEncryption
-#define EVP_PKEY_RSA2	NID_rsa
-#define EVP_PKEY_DSA	NID_dsa
-#define EVP_PKEY_DSA1	NID_dsa_2
-#define EVP_PKEY_DSA2	NID_dsaWithSHA
-#define EVP_PKEY_DSA3	NID_dsaWithSHA1
-#define EVP_PKEY_DSA4	NID_dsaWithSHA1_2
-#define EVP_PKEY_DH	NID_dhKeyAgreement
-#define EVP_PKEY_EC	NID_X9_62_id_ecPublicKey
-
-#ifdef	__cplusplus
-extern "C" {
-#endif
-
-/* Type needs to be a bit field
- * Sub-type needs to be for variations on the method, as in, can it do
- * arbitrary encryption.... */
-struct evp_pkey_st
-	{
-	int type;
-	int save_type;
-	int references;
-	union	{
-		char *ptr;
-#ifndef OPENSSL_NO_RSA
-		struct rsa_st *rsa;	/* RSA */
-#endif
-#ifndef OPENSSL_NO_DSA
-		struct dsa_st *dsa;	/* DSA */
-#endif
-#ifndef OPENSSL_NO_DH
-		struct dh_st *dh;	/* DH */
-#endif
-#ifndef OPENSSL_NO_EC
-		struct ec_key_st *ec;	/* ECC */
-#endif
-		} pkey;
-	int save_parameters;
-	STACK_OF(X509_ATTRIBUTE) *attributes; /* [ 0 ] */
-	} /* EVP_PKEY */;
-
-#define EVP_PKEY_MO_SIGN	0x0001
-#define EVP_PKEY_MO_VERIFY	0x0002
-#define EVP_PKEY_MO_ENCRYPT	0x0004
-#define EVP_PKEY_MO_DECRYPT	0x0008
-
-#if 0
-/* This structure is required to tie the message digest and signing together.
- * The lookup can be done by md/pkey_method, oid, oid/pkey_method, or
- * oid, md and pkey.
- * This is required because for various smart-card perform the digest and
- * signing/verification on-board.  To handle this case, the specific
- * EVP_MD and EVP_PKEY_METHODs need to be closely associated.
- * When a PKEY is created, it will have a EVP_PKEY_METHOD associated with it.
- * This can either be software or a token to provide the required low level
- * routines.
- */
-typedef struct evp_pkey_md_st
-	{
-	int oid;
-	EVP_MD *md;
-	EVP_PKEY_METHOD *pkey;
-	} EVP_PKEY_MD;
-
-#define EVP_rsa_md2() \
-		EVP_PKEY_MD_add(NID_md2WithRSAEncryption,\
-			EVP_rsa_pkcs1(),EVP_md2())
-#define EVP_rsa_md5() \
-		EVP_PKEY_MD_add(NID_md5WithRSAEncryption,\
-			EVP_rsa_pkcs1(),EVP_md5())
-#define EVP_rsa_sha0() \
-		EVP_PKEY_MD_add(NID_shaWithRSAEncryption,\
-			EVP_rsa_pkcs1(),EVP_sha())
-#define EVP_rsa_sha1() \
-		EVP_PKEY_MD_add(NID_sha1WithRSAEncryption,\
-			EVP_rsa_pkcs1(),EVP_sha1())
-#define EVP_rsa_ripemd160() \
-		EVP_PKEY_MD_add(NID_ripemd160WithRSA,\
-			EVP_rsa_pkcs1(),EVP_ripemd160())
-#define EVP_rsa_mdc2() \
-		EVP_PKEY_MD_add(NID_mdc2WithRSA,\
-			EVP_rsa_octet_string(),EVP_mdc2())
-#define EVP_dsa_sha() \
-		EVP_PKEY_MD_add(NID_dsaWithSHA,\
-			EVP_dsa(),EVP_sha())
-#define EVP_dsa_sha1() \
-		EVP_PKEY_MD_add(NID_dsaWithSHA1,\
-			EVP_dsa(),EVP_sha1())
-
-typedef struct evp_pkey_method_st
-	{
-	char *name;
-	int flags;
-	int type;		/* RSA, DSA, an SSLeay specific constant */
-	int oid;		/* For the pub-key type */
-	int encrypt_oid;	/* pub/priv key encryption */
-
-	int (*sign)();
-	int (*verify)();
-	struct	{
-		int (*set)();	/* get and/or set the underlying type */
-		int (*get)();
-		int (*encrypt)();
-		int (*decrypt)();
-		int (*i2d)();
-		int (*d2i)();
-		int (*dup)();
-		} pub,priv;
-	int (*set_asn1_parameters)();
-	int (*get_asn1_parameters)();
-	} EVP_PKEY_METHOD;
-#endif
-
-#ifndef EVP_MD
-struct env_md_st
-	{
-	int type;
-	int pkey_type;
-	int md_size;
-	unsigned long flags;
-	int (*init)(EVP_MD_CTX *ctx);
-	int (*update)(EVP_MD_CTX *ctx,const void *data,size_t count);
-	int (*final)(EVP_MD_CTX *ctx,unsigned char *md);
-	int (*copy)(EVP_MD_CTX *to,const EVP_MD_CTX *from);
-	int (*cleanup)(EVP_MD_CTX *ctx);
-
-	/* FIXME: prototype these some day */
-	int (*sign)(int type, const unsigned char *m, unsigned int m_length,
-		    unsigned char *sigret, unsigned int *siglen, void *key);
-	int (*verify)(int type, const unsigned char *m, unsigned int m_length,
-		      const unsigned char *sigbuf, unsigned int siglen,
-		      void *key);
-	int required_pkey_type[5]; /*EVP_PKEY_xxx */
-	int block_size;
-	int ctx_size; /* how big does the ctx->md_data need to be */
-	} /* EVP_MD */;
-
-typedef int evp_sign_method(int type,const unsigned char *m,
-			    unsigned int m_length,unsigned char *sigret,
-			    unsigned int *siglen, void *key);
-typedef int evp_verify_method(int type,const unsigned char *m,
-			    unsigned int m_length,const unsigned char *sigbuf,
-			    unsigned int siglen, void *key);
-
-#define EVP_MD_FLAG_ONESHOT	0x0001 /* digest can only handle a single
-					* block */
-
-#define EVP_PKEY_NULL_method	NULL,NULL,{0,0,0,0}
-
-#ifndef OPENSSL_NO_DSA
-#define EVP_PKEY_DSA_method	(evp_sign_method *)DSA_sign, \
-				(evp_verify_method *)DSA_verify, \
-				{EVP_PKEY_DSA,EVP_PKEY_DSA2,EVP_PKEY_DSA3, \
-					EVP_PKEY_DSA4,0}
-#else
-#define EVP_PKEY_DSA_method	EVP_PKEY_NULL_method
-#endif
-
-#ifndef OPENSSL_NO_ECDSA
-#define EVP_PKEY_ECDSA_method   (evp_sign_method *)ECDSA_sign, \
-				(evp_verify_method *)ECDSA_verify, \
-                                 {EVP_PKEY_EC,0,0,0}
-#else   
-#define EVP_PKEY_ECDSA_method   EVP_PKEY_NULL_method
-#endif
-
-#ifndef OPENSSL_NO_RSA
-#define EVP_PKEY_RSA_method	(evp_sign_method *)RSA_sign, \
-				(evp_verify_method *)RSA_verify, \
-				{EVP_PKEY_RSA,EVP_PKEY_RSA2,0,0}
-#define EVP_PKEY_RSA_ASN1_OCTET_STRING_method \
-				(evp_sign_method *)RSA_sign_ASN1_OCTET_STRING, \
-				(evp_verify_method *)RSA_verify_ASN1_OCTET_STRING, \
-				{EVP_PKEY_RSA,EVP_PKEY_RSA2,0,0}
-#else
-#define EVP_PKEY_RSA_method	EVP_PKEY_NULL_method
-#define EVP_PKEY_RSA_ASN1_OCTET_STRING_method EVP_PKEY_NULL_method
-#endif
-
-#endif /* !EVP_MD */
-
-struct env_md_ctx_st
-	{
-	const EVP_MD *digest;
-	ENGINE *engine; /* functional reference if 'digest' is ENGINE-provided */
-	unsigned long flags;
-	void *md_data;
-	} /* EVP_MD_CTX */;
-
-/* values for EVP_MD_CTX flags */
-
-#define EVP_MD_CTX_FLAG_ONESHOT		0x0001 /* digest update will be called
-						* once only */
-#define EVP_MD_CTX_FLAG_CLEANED		0x0002 /* context has already been
-						* cleaned */
-#define EVP_MD_CTX_FLAG_REUSE		0x0004 /* Don't free up ctx->md_data
-						* in EVP_MD_CTX_cleanup */
-
-struct evp_cipher_st
-	{
-	int nid;
-	int block_size;
-	int key_len;		/* Default value for variable length ciphers */
-	int iv_len;
-	unsigned long flags;	/* Various flags */
-	int (*init)(EVP_CIPHER_CTX *ctx, const unsigned char *key,
-		    const unsigned char *iv, int enc);	/* init key */
-	int (*do_cipher)(EVP_CIPHER_CTX *ctx, unsigned char *out,
-			 const unsigned char *in, unsigned int inl);/* encrypt/decrypt data */
-	int (*cleanup)(EVP_CIPHER_CTX *); /* cleanup ctx */
-	int ctx_size;		/* how big ctx->cipher_data needs to be */
-	int (*set_asn1_parameters)(EVP_CIPHER_CTX *, ASN1_TYPE *); /* Populate a ASN1_TYPE with parameters */
-	int (*get_asn1_parameters)(EVP_CIPHER_CTX *, ASN1_TYPE *); /* Get parameters from a ASN1_TYPE */
-	int (*ctrl)(EVP_CIPHER_CTX *, int type, int arg, void *ptr); /* Miscellaneous operations */
-	void *app_data;		/* Application data */
-	} /* EVP_CIPHER */;
-
-/* Values for cipher flags */
-
-/* Modes for ciphers */
-
-#define		EVP_CIPH_STREAM_CIPHER		0x0
-#define		EVP_CIPH_ECB_MODE		0x1
-#define		EVP_CIPH_CBC_MODE		0x2
-#define		EVP_CIPH_CFB_MODE		0x3
-#define		EVP_CIPH_OFB_MODE		0x4
-#define 	EVP_CIPH_MODE			0x7
-/* Set if variable length cipher */
-#define 	EVP_CIPH_VARIABLE_LENGTH	0x8
-/* Set if the iv handling should be done by the cipher itself */
-#define 	EVP_CIPH_CUSTOM_IV		0x10
-/* Set if the cipher's init() function should be called if key is NULL */
-#define 	EVP_CIPH_ALWAYS_CALL_INIT	0x20
-/* Call ctrl() to init cipher parameters */
-#define 	EVP_CIPH_CTRL_INIT		0x40
-/* Don't use standard key length function */
-#define 	EVP_CIPH_CUSTOM_KEY_LENGTH	0x80
-/* Don't use standard block padding */
-#define 	EVP_CIPH_NO_PADDING		0x100
-/* cipher handles random key generation */
-#define 	EVP_CIPH_RAND_KEY		0x200
-
-/* ctrl() values */
-
-#define		EVP_CTRL_INIT			0x0
-#define 	EVP_CTRL_SET_KEY_LENGTH		0x1
-#define 	EVP_CTRL_GET_RC2_KEY_BITS	0x2
-#define 	EVP_CTRL_SET_RC2_KEY_BITS	0x3
-#define 	EVP_CTRL_GET_RC5_ROUNDS		0x4
-#define 	EVP_CTRL_SET_RC5_ROUNDS		0x5
-#define 	EVP_CTRL_RAND_KEY		0x6
-
-typedef struct evp_cipher_info_st
-	{
-	const EVP_CIPHER *cipher;
-	unsigned char iv[EVP_MAX_IV_LENGTH];
-	} EVP_CIPHER_INFO;
-
-struct evp_cipher_ctx_st
-	{
-	const EVP_CIPHER *cipher;
-	ENGINE *engine;	/* functional reference if 'cipher' is ENGINE-provided */
-	int encrypt;		/* encrypt or decrypt */
-	int buf_len;		/* number we have left */
-
-	unsigned char  oiv[EVP_MAX_IV_LENGTH];	/* original iv */
-	unsigned char  iv[EVP_MAX_IV_LENGTH];	/* working iv */
-	unsigned char buf[EVP_MAX_BLOCK_LENGTH];/* saved partial block */
-	int num;				/* used by cfb/ofb mode */
-
-	void *app_data;		/* application stuff */
-	int key_len;		/* May change for variable length cipher */
-	unsigned long flags;	/* Various flags */
-	void *cipher_data; /* per EVP data */
-	int final_used;
-	int block_mask;
-	unsigned char final[EVP_MAX_BLOCK_LENGTH];/* possible final block */
-	} /* EVP_CIPHER_CTX */;
-
-typedef struct evp_Encode_Ctx_st
-	{
-	int num;	/* number saved in a partial encode/decode */
-	int length;	/* The length is either the output line length
-			 * (in input bytes) or the shortest input line
-			 * length that is ok.  Once decoding begins,
-			 * the length is adjusted up each time a longer
-			 * line is decoded */
-	unsigned char enc_data[80];	/* data to encode */
-	int line_num;	/* number read on current line */
-	int expect_nl;
-	} EVP_ENCODE_CTX;
-
-/* Password based encryption function */
-typedef int (EVP_PBE_KEYGEN)(EVP_CIPHER_CTX *ctx, const char *pass, int passlen,
-		ASN1_TYPE *param, const EVP_CIPHER *cipher,
-                const EVP_MD *md, int en_de);
-
-#ifndef OPENSSL_NO_RSA
-#define EVP_PKEY_assign_RSA(pkey,rsa) EVP_PKEY_assign((pkey),EVP_PKEY_RSA,\
-					(char *)(rsa))
-#endif
-
-#ifndef OPENSSL_NO_DSA
-#define EVP_PKEY_assign_DSA(pkey,dsa) EVP_PKEY_assign((pkey),EVP_PKEY_DSA,\
-					(char *)(dsa))
-#endif
-
-#ifndef OPENSSL_NO_DH
-#define EVP_PKEY_assign_DH(pkey,dh) EVP_PKEY_assign((pkey),EVP_PKEY_DH,\
-					(char *)(dh))
-#endif
-
-#ifndef OPENSSL_NO_EC
-#define EVP_PKEY_assign_EC_KEY(pkey,eckey) EVP_PKEY_assign((pkey),EVP_PKEY_EC,\
-                                        (char *)(eckey))
-#endif
-
-/* Add some extra combinations */
-#define EVP_get_digestbynid(a) EVP_get_digestbyname(OBJ_nid2sn(a))
-#define EVP_get_digestbyobj(a) EVP_get_digestbynid(OBJ_obj2nid(a))
-#define EVP_get_cipherbynid(a) EVP_get_cipherbyname(OBJ_nid2sn(a))
-#define EVP_get_cipherbyobj(a) EVP_get_cipherbynid(OBJ_obj2nid(a))
-
-int EVP_MD_type(const EVP_MD *md);
-#define EVP_MD_nid(e)			EVP_MD_type(e)
-#define EVP_MD_name(e)			OBJ_nid2sn(EVP_MD_nid(e))
-int EVP_MD_pkey_type(const EVP_MD *md);	
-int EVP_MD_size(const EVP_MD *md);
-int EVP_MD_block_size(const EVP_MD *md);
-
-const EVP_MD * EVP_MD_CTX_md(const EVP_MD_CTX *ctx);
-#define EVP_MD_CTX_size(e)		EVP_MD_size(EVP_MD_CTX_md(e))
-#define EVP_MD_CTX_block_size(e)	EVP_MD_block_size(EVP_MD_CTX_md(e))
-#define EVP_MD_CTX_type(e)		EVP_MD_type(EVP_MD_CTX_md(e))
-
-int EVP_CIPHER_nid(const EVP_CIPHER *cipher);
-#define EVP_CIPHER_name(e)		OBJ_nid2sn(EVP_CIPHER_nid(e))
-int EVP_CIPHER_block_size(const EVP_CIPHER *cipher);
-int EVP_CIPHER_key_length(const EVP_CIPHER *cipher);
-int EVP_CIPHER_iv_length(const EVP_CIPHER *cipher);
-unsigned long EVP_CIPHER_flags(const EVP_CIPHER *cipher);
-#define EVP_CIPHER_mode(e)		(EVP_CIPHER_flags(e) & EVP_CIPH_MODE)
-
-const EVP_CIPHER * EVP_CIPHER_CTX_cipher(const EVP_CIPHER_CTX *ctx);
-int EVP_CIPHER_CTX_nid(const EVP_CIPHER_CTX *ctx);
-int EVP_CIPHER_CTX_block_size(const EVP_CIPHER_CTX *ctx);
-int EVP_CIPHER_CTX_key_length(const EVP_CIPHER_CTX *ctx);
-int EVP_CIPHER_CTX_iv_length(const EVP_CIPHER_CTX *ctx);
-void * EVP_CIPHER_CTX_get_app_data(const EVP_CIPHER_CTX *ctx);
-void EVP_CIPHER_CTX_set_app_data(EVP_CIPHER_CTX *ctx, void *data);
-#define EVP_CIPHER_CTX_type(c)         EVP_CIPHER_type(EVP_CIPHER_CTX_cipher(c))
-unsigned long EVP_CIPHER_CTX_flags(const EVP_CIPHER_CTX *ctx);
-#define EVP_CIPHER_CTX_mode(e)		(EVP_CIPHER_CTX_flags(e) & EVP_CIPH_MODE)
-
-#define EVP_ENCODE_LENGTH(l)	(((l+2)/3*4)+(l/48+1)*2+80)
-#define EVP_DECODE_LENGTH(l)	((l+3)/4*3+80)
-
-#define EVP_SignInit_ex(a,b,c)		EVP_DigestInit_ex(a,b,c)
-#define EVP_SignInit(a,b)		EVP_DigestInit(a,b)
-#define EVP_SignUpdate(a,b,c)		EVP_DigestUpdate(a,b,c)
-#define	EVP_VerifyInit_ex(a,b,c)	EVP_DigestInit_ex(a,b,c)
-#define	EVP_VerifyInit(a,b)		EVP_DigestInit(a,b)
-#define	EVP_VerifyUpdate(a,b,c)		EVP_DigestUpdate(a,b,c)
-#define EVP_OpenUpdate(a,b,c,d,e)	EVP_DecryptUpdate(a,b,c,d,e)
-#define EVP_SealUpdate(a,b,c,d,e)	EVP_EncryptUpdate(a,b,c,d,e)	
-
-#ifdef CONST_STRICT
-void BIO_set_md(BIO *,const EVP_MD *md);
-#else
-# define BIO_set_md(b,md)		BIO_ctrl(b,BIO_C_SET_MD,0,(char *)md)
-#endif
-#define BIO_get_md(b,mdp)		BIO_ctrl(b,BIO_C_GET_MD,0,(char *)mdp)
-#define BIO_get_md_ctx(b,mdcp)     BIO_ctrl(b,BIO_C_GET_MD_CTX,0,(char *)mdcp)
-#define BIO_set_md_ctx(b,mdcp)     BIO_ctrl(b,BIO_C_SET_MD_CTX,0,(char *)mdcp)
-#define BIO_get_cipher_status(b)	BIO_ctrl(b,BIO_C_GET_CIPHER_STATUS,0,NULL)
-#define BIO_get_cipher_ctx(b,c_pp)	BIO_ctrl(b,BIO_C_GET_CIPHER_CTX,0,(char *)c_pp)
-
-int EVP_Cipher(EVP_CIPHER_CTX *c,
-		unsigned char *out,
-		const unsigned char *in,
-		unsigned int inl);
-
-#define EVP_add_cipher_alias(n,alias) \
-	OBJ_NAME_add((alias),OBJ_NAME_TYPE_CIPHER_METH|OBJ_NAME_ALIAS,(n))
-#define EVP_add_digest_alias(n,alias) \
-	OBJ_NAME_add((alias),OBJ_NAME_TYPE_MD_METH|OBJ_NAME_ALIAS,(n))
-#define EVP_delete_cipher_alias(alias) \
-	OBJ_NAME_remove(alias,OBJ_NAME_TYPE_CIPHER_METH|OBJ_NAME_ALIAS);
-#define EVP_delete_digest_alias(alias) \
-	OBJ_NAME_remove(alias,OBJ_NAME_TYPE_MD_METH|OBJ_NAME_ALIAS);
-
-void	EVP_MD_CTX_init(EVP_MD_CTX *ctx);
-int	EVP_MD_CTX_cleanup(EVP_MD_CTX *ctx);
-EVP_MD_CTX *EVP_MD_CTX_create(void);
-void	EVP_MD_CTX_destroy(EVP_MD_CTX *ctx);
-int     EVP_MD_CTX_copy_ex(EVP_MD_CTX *out,const EVP_MD_CTX *in);  
-void	EVP_MD_CTX_set_flags(EVP_MD_CTX *ctx, int flags);
-void	EVP_MD_CTX_clear_flags(EVP_MD_CTX *ctx, int flags);
-int 	EVP_MD_CTX_test_flags(const EVP_MD_CTX *ctx,int flags);
-int	EVP_DigestInit_ex(EVP_MD_CTX *ctx, const EVP_MD *type, ENGINE *impl);
-int	EVP_DigestUpdate(EVP_MD_CTX *ctx,const void *d,
-			 size_t cnt);
-int	EVP_DigestFinal_ex(EVP_MD_CTX *ctx,unsigned char *md,unsigned int *s);
-int	EVP_Digest(const void *data, size_t count,
-		unsigned char *md, unsigned int *size, const EVP_MD *type, ENGINE *impl);
-
-int     EVP_MD_CTX_copy(EVP_MD_CTX *out,const EVP_MD_CTX *in);  
-int	EVP_DigestInit(EVP_MD_CTX *ctx, const EVP_MD *type);
-int	EVP_DigestFinal(EVP_MD_CTX *ctx,unsigned char *md,unsigned int *s);
-
-int	EVP_read_pw_string(char *buf,int length,const char *prompt,int verify);
-void	EVP_set_pw_prompt(const char *prompt);
-char *	EVP_get_pw_prompt(void);
-
-int	EVP_BytesToKey(const EVP_CIPHER *type,const EVP_MD *md,
-		const unsigned char *salt, const unsigned char *data,
-		int datal, int count, unsigned char *key,unsigned char *iv);
-
-int	EVP_EncryptInit(EVP_CIPHER_CTX *ctx,const EVP_CIPHER *cipher,
-		const unsigned char *key, const unsigned char *iv);
-int	EVP_EncryptInit_ex(EVP_CIPHER_CTX *ctx,const EVP_CIPHER *cipher, ENGINE *impl,
-		const unsigned char *key, const unsigned char *iv);
-int	EVP_EncryptUpdate(EVP_CIPHER_CTX *ctx, unsigned char *out,
-		int *outl, const unsigned char *in, int inl);
-int	EVP_EncryptFinal_ex(EVP_CIPHER_CTX *ctx, unsigned char *out, int *outl);
-int	EVP_EncryptFinal(EVP_CIPHER_CTX *ctx, unsigned char *out, int *outl);
-
-int	EVP_DecryptInit(EVP_CIPHER_CTX *ctx,const EVP_CIPHER *cipher,
-		const unsigned char *key, const unsigned char *iv);
-int	EVP_DecryptInit_ex(EVP_CIPHER_CTX *ctx,const EVP_CIPHER *cipher, ENGINE *impl,
-		const unsigned char *key, const unsigned char *iv);
-int	EVP_DecryptUpdate(EVP_CIPHER_CTX *ctx, unsigned char *out,
-		int *outl, const unsigned char *in, int inl);
-int	EVP_DecryptFinal(EVP_CIPHER_CTX *ctx, unsigned char *outm, int *outl);
-int	EVP_DecryptFinal_ex(EVP_CIPHER_CTX *ctx, unsigned char *outm, int *outl);
-
-int	EVP_CipherInit(EVP_CIPHER_CTX *ctx,const EVP_CIPHER *cipher,
-		       const unsigned char *key,const unsigned char *iv,
-		       int enc);
-int	EVP_CipherInit_ex(EVP_CIPHER_CTX *ctx,const EVP_CIPHER *cipher, ENGINE *impl,
-		       const unsigned char *key,const unsigned char *iv,
-		       int enc);
-int	EVP_CipherUpdate(EVP_CIPHER_CTX *ctx, unsigned char *out,
-		int *outl, const unsigned char *in, int inl);
-int	EVP_CipherFinal(EVP_CIPHER_CTX *ctx, unsigned char *outm, int *outl);
-int	EVP_CipherFinal_ex(EVP_CIPHER_CTX *ctx, unsigned char *outm, int *outl);
-
-int	EVP_SignFinal(EVP_MD_CTX *ctx,unsigned char *md,unsigned int *s,
-		EVP_PKEY *pkey);
-
-int	EVP_VerifyFinal(EVP_MD_CTX *ctx,const unsigned char *sigbuf,
-		unsigned int siglen,EVP_PKEY *pkey);
-
-int	EVP_OpenInit(EVP_CIPHER_CTX *ctx,const EVP_CIPHER *type,
-		const unsigned char *ek, int ekl, const unsigned char *iv,
-		EVP_PKEY *priv);
-int	EVP_OpenFinal(EVP_CIPHER_CTX *ctx, unsigned char *out, int *outl);
-
-int	EVP_SealInit(EVP_CIPHER_CTX *ctx, const EVP_CIPHER *type,
-		 unsigned char **ek, int *ekl, unsigned char *iv,
-		EVP_PKEY **pubk, int npubk);
-int	EVP_SealFinal(EVP_CIPHER_CTX *ctx,unsigned char *out,int *outl);
-
-void	EVP_EncodeInit(EVP_ENCODE_CTX *ctx);
-void	EVP_EncodeUpdate(EVP_ENCODE_CTX *ctx,unsigned char *out,int *outl,
-		const unsigned char *in,int inl);
-void	EVP_EncodeFinal(EVP_ENCODE_CTX *ctx,unsigned char *out,int *outl);
-int	EVP_EncodeBlock(unsigned char *t, const unsigned char *f, int n);
-
-void	EVP_DecodeInit(EVP_ENCODE_CTX *ctx);
-int	EVP_DecodeUpdate(EVP_ENCODE_CTX *ctx,unsigned char *out,int *outl,
-		const unsigned char *in, int inl);
-int	EVP_DecodeFinal(EVP_ENCODE_CTX *ctx, unsigned
-		char *out, int *outl);
-int	EVP_DecodeBlock(unsigned char *t, const unsigned char *f, int n);
-
-void EVP_CIPHER_CTX_init(EVP_CIPHER_CTX *a);
-int EVP_CIPHER_CTX_cleanup(EVP_CIPHER_CTX *a);
-EVP_CIPHER_CTX *EVP_CIPHER_CTX_new(void);
-void EVP_CIPHER_CTX_free(EVP_CIPHER_CTX *a);
-int EVP_CIPHER_CTX_set_key_length(EVP_CIPHER_CTX *x, int keylen);
-int EVP_CIPHER_CTX_set_padding(EVP_CIPHER_CTX *c, int pad);
-int EVP_CIPHER_CTX_ctrl(EVP_CIPHER_CTX *ctx, int type, int arg, void *ptr);
-int EVP_CIPHER_CTX_rand_key(EVP_CIPHER_CTX *ctx, unsigned char *key);
-
-#ifndef OPENSSL_NO_BIO
-BIO_METHOD *BIO_f_md(void);
-BIO_METHOD *BIO_f_base64(void);
-BIO_METHOD *BIO_f_cipher(void);
-BIO_METHOD *BIO_f_reliable(void);
-void BIO_set_cipher(BIO *b,const EVP_CIPHER *c,const unsigned char *k,
-		const unsigned char *i, int enc);
-#endif
-
-const EVP_MD *EVP_md_null(void);
-#ifndef OPENSSL_NO_MD2
-const EVP_MD *EVP_md2(void);
-#endif
-#ifndef OPENSSL_NO_MD4
-const EVP_MD *EVP_md4(void);
-#endif
-#ifndef OPENSSL_NO_MD5
-const EVP_MD *EVP_md5(void);
-#endif
-#ifndef OPENSSL_NO_SHA
-const EVP_MD *EVP_sha(void);
-const EVP_MD *EVP_sha1(void);
-const EVP_MD *EVP_dss(void);
-const EVP_MD *EVP_dss1(void);
-const EVP_MD *EVP_ecdsa(void);
-#endif
-#ifndef OPENSSL_NO_SHA256
-const EVP_MD *EVP_sha224(void);
-const EVP_MD *EVP_sha256(void);
-#endif
-#ifndef OPENSSL_NO_SHA512
-const EVP_MD *EVP_sha384(void);
-const EVP_MD *EVP_sha512(void);
-#endif
-#ifndef OPENSSL_NO_MDC2
-const EVP_MD *EVP_mdc2(void);
-#endif
-#ifndef OPENSSL_NO_RIPEMD
-const EVP_MD *EVP_ripemd160(void);
-#endif
-const EVP_CIPHER *EVP_enc_null(void);		/* does nothing :-) */
-#ifndef OPENSSL_NO_DES
-const EVP_CIPHER *EVP_des_ecb(void);
-const EVP_CIPHER *EVP_des_ede(void);
-const EVP_CIPHER *EVP_des_ede3(void);
-const EVP_CIPHER *EVP_des_ede_ecb(void);
-const EVP_CIPHER *EVP_des_ede3_ecb(void);
-const EVP_CIPHER *EVP_des_cfb64(void);
-# define EVP_des_cfb EVP_des_cfb64
-const EVP_CIPHER *EVP_des_cfb1(void);
-const EVP_CIPHER *EVP_des_cfb8(void);
-const EVP_CIPHER *EVP_des_ede_cfb64(void);
-# define EVP_des_ede_cfb EVP_des_ede_cfb64
-#if 0
-const EVP_CIPHER *EVP_des_ede_cfb1(void);
-const EVP_CIPHER *EVP_des_ede_cfb8(void);
-#endif
-const EVP_CIPHER *EVP_des_ede3_cfb64(void);
-# define EVP_des_ede3_cfb EVP_des_ede3_cfb64
-const EVP_CIPHER *EVP_des_ede3_cfb1(void);
-const EVP_CIPHER *EVP_des_ede3_cfb8(void);
-const EVP_CIPHER *EVP_des_ofb(void);
-const EVP_CIPHER *EVP_des_ede_ofb(void);
-const EVP_CIPHER *EVP_des_ede3_ofb(void);
-const EVP_CIPHER *EVP_des_cbc(void);
-const EVP_CIPHER *EVP_des_ede_cbc(void);
-const EVP_CIPHER *EVP_des_ede3_cbc(void);
-const EVP_CIPHER *EVP_desx_cbc(void);
-/* This should now be supported through the dev_crypto ENGINE. But also, why are
- * rc4 and md5 declarations made here inside a "NO_DES" precompiler branch? */
-#if 0
-# ifdef OPENSSL_OPENBSD_DEV_CRYPTO
-const EVP_CIPHER *EVP_dev_crypto_des_ede3_cbc(void);
-const EVP_CIPHER *EVP_dev_crypto_rc4(void);
-const EVP_MD *EVP_dev_crypto_md5(void);
-# endif
-#endif
-#endif
-#ifndef OPENSSL_NO_RC4
-const EVP_CIPHER *EVP_rc4(void);
-const EVP_CIPHER *EVP_rc4_40(void);
-#endif
-#ifndef OPENSSL_NO_IDEA
-const EVP_CIPHER *EVP_idea_ecb(void);
-const EVP_CIPHER *EVP_idea_cfb64(void);
-# define EVP_idea_cfb EVP_idea_cfb64
-const EVP_CIPHER *EVP_idea_ofb(void);
-const EVP_CIPHER *EVP_idea_cbc(void);
-#endif
-#ifndef OPENSSL_NO_RC2
-const EVP_CIPHER *EVP_rc2_ecb(void);
-const EVP_CIPHER *EVP_rc2_cbc(void);
-const EVP_CIPHER *EVP_rc2_40_cbc(void);
-const EVP_CIPHER *EVP_rc2_64_cbc(void);
-const EVP_CIPHER *EVP_rc2_cfb64(void);
-# define EVP_rc2_cfb EVP_rc2_cfb64
-const EVP_CIPHER *EVP_rc2_ofb(void);
-#endif
-#ifndef OPENSSL_NO_BF
-const EVP_CIPHER *EVP_bf_ecb(void);
-const EVP_CIPHER *EVP_bf_cbc(void);
-const EVP_CIPHER *EVP_bf_cfb64(void);
-# define EVP_bf_cfb EVP_bf_cfb64
-const EVP_CIPHER *EVP_bf_ofb(void);
-#endif
-#ifndef OPENSSL_NO_CAST
-const EVP_CIPHER *EVP_cast5_ecb(void);
-const EVP_CIPHER *EVP_cast5_cbc(void);
-const EVP_CIPHER *EVP_cast5_cfb64(void);
-# define EVP_cast5_cfb EVP_cast5_cfb64
-const EVP_CIPHER *EVP_cast5_ofb(void);
-#endif
-#ifndef OPENSSL_NO_RC5
-const EVP_CIPHER *EVP_rc5_32_12_16_cbc(void);
-const EVP_CIPHER *EVP_rc5_32_12_16_ecb(void);
-const EVP_CIPHER *EVP_rc5_32_12_16_cfb64(void);
-# define EVP_rc5_32_12_16_cfb EVP_rc5_32_12_16_cfb64
-const EVP_CIPHER *EVP_rc5_32_12_16_ofb(void);
-#endif
-#ifndef OPENSSL_NO_AES
-const EVP_CIPHER *EVP_aes_128_ecb(void);
-const EVP_CIPHER *EVP_aes_128_cbc(void);
-const EVP_CIPHER *EVP_aes_128_cfb1(void);
-const EVP_CIPHER *EVP_aes_128_cfb8(void);
-const EVP_CIPHER *EVP_aes_128_cfb128(void);
-# define EVP_aes_128_cfb EVP_aes_128_cfb128
-const EVP_CIPHER *EVP_aes_128_ofb(void);
-#if 0
-const EVP_CIPHER *EVP_aes_128_ctr(void);
-#endif
-const EVP_CIPHER *EVP_aes_192_ecb(void);
-const EVP_CIPHER *EVP_aes_192_cbc(void);
-const EVP_CIPHER *EVP_aes_192_cfb1(void);
-const EVP_CIPHER *EVP_aes_192_cfb8(void);
-const EVP_CIPHER *EVP_aes_192_cfb128(void);
-# define EVP_aes_192_cfb EVP_aes_192_cfb128
-const EVP_CIPHER *EVP_aes_192_ofb(void);
-#if 0
-const EVP_CIPHER *EVP_aes_192_ctr(void);
-#endif
-const EVP_CIPHER *EVP_aes_256_ecb(void);
-const EVP_CIPHER *EVP_aes_256_cbc(void);
-const EVP_CIPHER *EVP_aes_256_cfb1(void);
-const EVP_CIPHER *EVP_aes_256_cfb8(void);
-const EVP_CIPHER *EVP_aes_256_cfb128(void);
-# define EVP_aes_256_cfb EVP_aes_256_cfb128
-const EVP_CIPHER *EVP_aes_256_ofb(void);
-#if 0
-const EVP_CIPHER *EVP_aes_256_ctr(void);
-#endif
-#endif
-#ifndef OPENSSL_NO_CAMELLIA
-const EVP_CIPHER *EVP_camellia_128_ecb(void);
-const EVP_CIPHER *EVP_camellia_128_cbc(void);
-const EVP_CIPHER *EVP_camellia_128_cfb1(void);
-const EVP_CIPHER *EVP_camellia_128_cfb8(void);
-const EVP_CIPHER *EVP_camellia_128_cfb128(void);
-# define EVP_camellia_128_cfb EVP_camellia_128_cfb128
-const EVP_CIPHER *EVP_camellia_128_ofb(void);
-const EVP_CIPHER *EVP_camellia_192_ecb(void);
-const EVP_CIPHER *EVP_camellia_192_cbc(void);
-const EVP_CIPHER *EVP_camellia_192_cfb1(void);
-const EVP_CIPHER *EVP_camellia_192_cfb8(void);
-const EVP_CIPHER *EVP_camellia_192_cfb128(void);
-# define EVP_camellia_192_cfb EVP_camellia_192_cfb128
-const EVP_CIPHER *EVP_camellia_192_ofb(void);
-const EVP_CIPHER *EVP_camellia_256_ecb(void);
-const EVP_CIPHER *EVP_camellia_256_cbc(void);
-const EVP_CIPHER *EVP_camellia_256_cfb1(void);
-const EVP_CIPHER *EVP_camellia_256_cfb8(void);
-const EVP_CIPHER *EVP_camellia_256_cfb128(void);
-# define EVP_camellia_256_cfb EVP_camellia_256_cfb128
-const EVP_CIPHER *EVP_camellia_256_ofb(void);
-#endif
-
-void OPENSSL_add_all_algorithms_noconf(void);
-void OPENSSL_add_all_algorithms_conf(void);
-
-#ifdef OPENSSL_LOAD_CONF
-#define OpenSSL_add_all_algorithms() \
-		OPENSSL_add_all_algorithms_conf()
-#else
-#define OpenSSL_add_all_algorithms() \
-		OPENSSL_add_all_algorithms_noconf()
-#endif
-
-void OpenSSL_add_all_ciphers(void);
-void OpenSSL_add_all_digests(void);
-#define SSLeay_add_all_algorithms() OpenSSL_add_all_algorithms()
-#define SSLeay_add_all_ciphers() OpenSSL_add_all_ciphers()
-#define SSLeay_add_all_digests() OpenSSL_add_all_digests()
-
-int EVP_add_cipher(const EVP_CIPHER *cipher);
-int EVP_add_digest(const EVP_MD *digest);
-
-const EVP_CIPHER *EVP_get_cipherbyname(const char *name);
-const EVP_MD *EVP_get_digestbyname(const char *name);
-void EVP_cleanup(void);
-
-int		EVP_PKEY_decrypt(unsigned char *dec_key,
-			const unsigned char *enc_key,int enc_key_len,
-			EVP_PKEY *private_key);
-int		EVP_PKEY_encrypt(unsigned char *enc_key,
-			const unsigned char *key,int key_len,
-			EVP_PKEY *pub_key);
-int		EVP_PKEY_type(int type);
-int		EVP_PKEY_bits(EVP_PKEY *pkey);
-int		EVP_PKEY_size(EVP_PKEY *pkey);
-int 		EVP_PKEY_assign(EVP_PKEY *pkey,int type,char *key);
-
-#ifndef OPENSSL_NO_RSA
-struct rsa_st;
-int EVP_PKEY_set1_RSA(EVP_PKEY *pkey,struct rsa_st *key);
-struct rsa_st *EVP_PKEY_get1_RSA(EVP_PKEY *pkey);
-#endif
-#ifndef OPENSSL_NO_DSA
-struct dsa_st;
-int EVP_PKEY_set1_DSA(EVP_PKEY *pkey,struct dsa_st *key);
-struct dsa_st *EVP_PKEY_get1_DSA(EVP_PKEY *pkey);
-#endif
-#ifndef OPENSSL_NO_DH
-struct dh_st;
-int EVP_PKEY_set1_DH(EVP_PKEY *pkey,struct dh_st *key);
-struct dh_st *EVP_PKEY_get1_DH(EVP_PKEY *pkey);
-#endif
-#ifndef OPENSSL_NO_EC
-struct ec_key_st;
-int EVP_PKEY_set1_EC_KEY(EVP_PKEY *pkey,struct ec_key_st *key);
-struct ec_key_st *EVP_PKEY_get1_EC_KEY(EVP_PKEY *pkey);
-#endif
-
-EVP_PKEY *	EVP_PKEY_new(void);
-void		EVP_PKEY_free(EVP_PKEY *pkey);
-
-EVP_PKEY *	d2i_PublicKey(int type,EVP_PKEY **a, const unsigned char **pp,
-			long length);
-int		i2d_PublicKey(EVP_PKEY *a, unsigned char **pp);
-
-EVP_PKEY *	d2i_PrivateKey(int type,EVP_PKEY **a, const unsigned char **pp,
-			long length);
-EVP_PKEY *	d2i_AutoPrivateKey(EVP_PKEY **a, const unsigned char **pp,
-			long length);
-int		i2d_PrivateKey(EVP_PKEY *a, unsigned char **pp);
-
-int EVP_PKEY_copy_parameters(EVP_PKEY *to, const EVP_PKEY *from);
-int EVP_PKEY_missing_parameters(const EVP_PKEY *pkey);
-int EVP_PKEY_save_parameters(EVP_PKEY *pkey,int mode);
-int EVP_PKEY_cmp_parameters(const EVP_PKEY *a, const EVP_PKEY *b);
-
-int EVP_PKEY_cmp(const EVP_PKEY *a, const EVP_PKEY *b);
-
-int EVP_CIPHER_type(const EVP_CIPHER *ctx);
-
-/* calls methods */
-int EVP_CIPHER_param_to_asn1(EVP_CIPHER_CTX *c, ASN1_TYPE *type);
-int EVP_CIPHER_asn1_to_param(EVP_CIPHER_CTX *c, ASN1_TYPE *type);
-
-/* These are used by EVP_CIPHER methods */
-int EVP_CIPHER_set_asn1_iv(EVP_CIPHER_CTX *c,ASN1_TYPE *type);
-int EVP_CIPHER_get_asn1_iv(EVP_CIPHER_CTX *c,ASN1_TYPE *type);
-
-/* PKCS5 password based encryption */
-int PKCS5_PBE_keyivgen(EVP_CIPHER_CTX *ctx, const char *pass, int passlen,
-			 ASN1_TYPE *param, const EVP_CIPHER *cipher, const EVP_MD *md,
-			 int en_de);
-int PKCS5_PBKDF2_HMAC_SHA1(const char *pass, int passlen,
-			   const unsigned char *salt, int saltlen, int iter,
-			   int keylen, unsigned char *out);
-int PKCS5_v2_PBE_keyivgen(EVP_CIPHER_CTX *ctx, const char *pass, int passlen,
-			 ASN1_TYPE *param, const EVP_CIPHER *cipher, const EVP_MD *md,
-			 int en_de);
-
-void PKCS5_PBE_add(void);
-
-int EVP_PBE_CipherInit (ASN1_OBJECT *pbe_obj, const char *pass, int passlen,
-	     ASN1_TYPE *param, EVP_CIPHER_CTX *ctx, int en_de);
-int EVP_PBE_alg_add(int nid, const EVP_CIPHER *cipher, const EVP_MD *md,
-		    EVP_PBE_KEYGEN *keygen);
-void EVP_PBE_cleanup(void);
-
-/* BEGIN ERROR CODES */
-/* The following lines are auto generated by the script mkerr.pl. Any changes
- * made after this point may be overwritten when the script is next run.
- */
-void ERR_load_EVP_strings(void);
-
-/* Error codes for the EVP functions. */
-
-/* Function codes. */
-#define EVP_F_AES_INIT_KEY				 133
-#define EVP_F_CAMELLIA_INIT_KEY				 159
-#define EVP_F_D2I_PKEY					 100
-#define EVP_F_DSAPKEY2PKCS8				 134
-#define EVP_F_DSA_PKEY2PKCS8				 135
-#define EVP_F_ECDSA_PKEY2PKCS8				 129
-#define EVP_F_ECKEY_PKEY2PKCS8				 132
-#define EVP_F_EVP_CIPHERINIT_EX				 123
-#define EVP_F_EVP_CIPHER_CTX_CTRL			 124
-#define EVP_F_EVP_CIPHER_CTX_SET_KEY_LENGTH		 122
-#define EVP_F_EVP_DECRYPTFINAL_EX			 101
-#define EVP_F_EVP_DIGESTINIT_EX				 128
-#define EVP_F_EVP_ENCRYPTFINAL_EX			 127
-#define EVP_F_EVP_MD_CTX_COPY_EX			 110
-#define EVP_F_EVP_OPENINIT				 102
-#define EVP_F_EVP_PBE_ALG_ADD				 115
-#define EVP_F_EVP_PBE_CIPHERINIT			 116
-#define EVP_F_EVP_PKCS82PKEY				 111
-#define EVP_F_EVP_PKEY2PKCS8_BROKEN			 113
-#define EVP_F_EVP_PKEY_COPY_PARAMETERS			 103
-#define EVP_F_EVP_PKEY_DECRYPT				 104
-#define EVP_F_EVP_PKEY_ENCRYPT				 105
-#define EVP_F_EVP_PKEY_GET1_DH				 119
-#define EVP_F_EVP_PKEY_GET1_DSA				 120
-#define EVP_F_EVP_PKEY_GET1_ECDSA			 130
-#define EVP_F_EVP_PKEY_GET1_EC_KEY			 131
-#define EVP_F_EVP_PKEY_GET1_RSA				 121
-#define EVP_F_EVP_PKEY_NEW				 106
-#define EVP_F_EVP_RIJNDAEL				 126
-#define EVP_F_EVP_SIGNFINAL				 107
-#define EVP_F_EVP_VERIFYFINAL				 108
-#define EVP_F_PKCS5_PBE_KEYIVGEN			 117
-#define EVP_F_PKCS5_V2_PBE_KEYIVGEN			 118
-#define EVP_F_PKCS8_SET_BROKEN				 112
-#define EVP_F_RC2_MAGIC_TO_METH				 109
-#define EVP_F_RC5_CTRL					 125
-
-/* Reason codes. */
-#define EVP_R_AES_KEY_SETUP_FAILED			 143
-#define EVP_R_ASN1_LIB					 140
-#define EVP_R_BAD_BLOCK_LENGTH				 136
-#define EVP_R_BAD_DECRYPT				 100
-#define EVP_R_BAD_KEY_LENGTH				 137
-#define EVP_R_BN_DECODE_ERROR				 112
-#define EVP_R_BN_PUBKEY_ERROR				 113
-#define EVP_R_CAMELLIA_KEY_SETUP_FAILED			 157
-#define EVP_R_CIPHER_PARAMETER_ERROR			 122
-#define EVP_R_CTRL_NOT_IMPLEMENTED			 132
-#define EVP_R_CTRL_OPERATION_NOT_IMPLEMENTED		 133
-#define EVP_R_DATA_NOT_MULTIPLE_OF_BLOCK_LENGTH		 138
-#define EVP_R_DECODE_ERROR				 114
-#define EVP_R_DIFFERENT_KEY_TYPES			 101
-#define EVP_R_ENCODE_ERROR				 115
-#define EVP_R_EVP_PBE_CIPHERINIT_ERROR			 119
-#define EVP_R_EXPECTING_AN_RSA_KEY			 127
-#define EVP_R_EXPECTING_A_DH_KEY			 128
-#define EVP_R_EXPECTING_A_DSA_KEY			 129
-#define EVP_R_EXPECTING_A_ECDSA_KEY			 141
-#define EVP_R_EXPECTING_A_EC_KEY			 142
-#define EVP_R_INITIALIZATION_ERROR			 134
-#define EVP_R_INPUT_NOT_INITIALIZED			 111
-#define EVP_R_INVALID_KEY_LENGTH			 130
-#define EVP_R_IV_TOO_LARGE				 102
-#define EVP_R_KEYGEN_FAILURE				 120
-#define EVP_R_MISSING_PARAMETERS			 103
-#define EVP_R_NO_CIPHER_SET				 131
-#define EVP_R_NO_DIGEST_SET				 139
-#define EVP_R_NO_DSA_PARAMETERS				 116
-#define EVP_R_NO_SIGN_FUNCTION_CONFIGURED		 104
-#define EVP_R_NO_VERIFY_FUNCTION_CONFIGURED		 105
-#define EVP_R_PKCS8_UNKNOWN_BROKEN_TYPE			 117
-#define EVP_R_PUBLIC_KEY_NOT_RSA			 106
-#define EVP_R_UNKNOWN_PBE_ALGORITHM			 121
-#define EVP_R_UNSUPORTED_NUMBER_OF_ROUNDS		 135
-#define EVP_R_UNSUPPORTED_CIPHER			 107
-#define EVP_R_UNSUPPORTED_KEYLENGTH			 123
-#define EVP_R_UNSUPPORTED_KEY_DERIVATION_FUNCTION	 124
-#define EVP_R_UNSUPPORTED_KEY_SIZE			 108
-#define EVP_R_UNSUPPORTED_PRF				 125
-#define EVP_R_UNSUPPORTED_PRIVATE_KEY_ALGORITHM		 118
-#define EVP_R_UNSUPPORTED_SALT_TYPE			 126
-#define EVP_R_WRONG_FINAL_BLOCK_LENGTH			 109
-#define EVP_R_WRONG_PUBLIC_KEY_TYPE			 110
-
-#ifdef  __cplusplus
-}
-#endif
-#endif
diff --git a/crypto/openssl/crypto/evp/evp_acnf.c b/crypto/openssl/crypto/evp/evp_acnf.c
deleted file mode 100644
index ff3e311cc527..000000000000
--- a/crypto/openssl/crypto/evp/evp_acnf.c
+++ /dev/null
@@ -1,73 +0,0 @@
-/* evp_acnf.c */
-/* Written by Stephen Henson (shenson@bigfoot.com) for the OpenSSL
- * project 2001.
- */
-/* ====================================================================
- * Copyright (c) 2001 The OpenSSL Project.  All rights reserved.
- *
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions
- * are met:
- *
- * 1. Redistributions of source code must retain the above copyright
- *    notice, this list of conditions and the following disclaimer. 
- *
- * 2. Redistributions in binary form must reproduce the above copyright
- *    notice, this list of conditions and the following disclaimer in
- *    the documentation and/or other materials provided with the
- *    distribution.
- *
- * 3. All advertising materials mentioning features or use of this
- *    software must display the following acknowledgment:
- *    "This product includes software developed by the OpenSSL Project
- *    for use in the OpenSSL Toolkit. (http://www.OpenSSL.org/)"
- *
- * 4. The names "OpenSSL Toolkit" and "OpenSSL Project" must not be used to
- *    endorse or promote products derived from this software without
- *    prior written permission. For written permission, please contact
- *    licensing@OpenSSL.org.
- *
- * 5. Products derived from this software may not be called "OpenSSL"
- *    nor may "OpenSSL" appear in their names without prior written
- *    permission of the OpenSSL Project.
- *
- * 6. Redistributions of any form whatsoever must retain the following
- *    acknowledgment:
- *    "This product includes software developed by the OpenSSL Project
- *    for use in the OpenSSL Toolkit (http://www.OpenSSL.org/)"
- *
- * THIS SOFTWARE IS PROVIDED BY THE OpenSSL PROJECT ``AS IS'' AND ANY
- * EXPRESSED OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
- * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR
- * PURPOSE ARE DISCLAIMED.  IN NO EVENT SHALL THE OpenSSL PROJECT OR
- * ITS CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
- * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
- * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
- * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
- * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
- * STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
- * ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED
- * OF THE POSSIBILITY OF SUCH DAMAGE.
- * ====================================================================
- *
- * This product includes cryptographic software written by Eric Young
- * (eay@cryptsoft.com).  This product includes software written by Tim
- * Hudson (tjh@cryptsoft.com).
- *
- */
-
-#include "cryptlib.h"
-#include <openssl/evp.h>
-#include <openssl/conf.h>
-
-
-/* Load all algorithms and configure OpenSSL.
- * This function is called automatically when
- * OPENSSL_LOAD_CONF is set.
- */
-
-void OPENSSL_add_all_algorithms_conf(void)
-	{
-	OPENSSL_add_all_algorithms_noconf();
-	OPENSSL_config(NULL);
-	}
diff --git a/crypto/openssl/crypto/evp/evp_enc.c b/crypto/openssl/crypto/evp/evp_enc.c
deleted file mode 100644
index a1904993bf76..000000000000
--- a/crypto/openssl/crypto/evp/evp_enc.c
+++ /dev/null
@@ -1,563 +0,0 @@
-/* crypto/evp/evp_enc.c */
-/* Copyright (C) 1995-1998 Eric Young (eay@cryptsoft.com)
- * All rights reserved.
- *
- * This package is an SSL implementation written
- * by Eric Young (eay@cryptsoft.com).
- * The implementation was written so as to conform with Netscapes SSL.
- * 
- * This library is free for commercial and non-commercial use as long as
- * the following conditions are aheared to.  The following conditions
- * apply to all code found in this distribution, be it the RC4, RSA,
- * lhash, DES, etc., code; not just the SSL code.  The SSL documentation
- * included with this distribution is covered by the same copyright terms
- * except that the holder is Tim Hudson (tjh@cryptsoft.com).
- * 
- * Copyright remains Eric Young's, and as such any Copyright notices in
- * the code are not to be removed.
- * If this package is used in a product, Eric Young should be given attribution
- * as the author of the parts of the library used.
- * This can be in the form of a textual message at program startup or
- * in documentation (online or textual) provided with the package.
- * 
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions
- * are met:
- * 1. Redistributions of source code must retain the copyright
- *    notice, this list of conditions and the following disclaimer.
- * 2. Redistributions in binary form must reproduce the above copyright
- *    notice, this list of conditions and the following disclaimer in the
- *    documentation and/or other materials provided with the distribution.
- * 3. All advertising materials mentioning features or use of this software
- *    must display the following acknowledgement:
- *    "This product includes cryptographic software written by
- *     Eric Young (eay@cryptsoft.com)"
- *    The word 'cryptographic' can be left out if the rouines from the library
- *    being used are not cryptographic related :-).
- * 4. If you include any Windows specific code (or a derivative thereof) from 
- *    the apps directory (application code) you must include an acknowledgement:
- *    "This product includes software written by Tim Hudson (tjh@cryptsoft.com)"
- * 
- * THIS SOFTWARE IS PROVIDED BY ERIC YOUNG ``AS IS'' AND
- * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
- * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
- * ARE DISCLAIMED.  IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE
- * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
- * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
- * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
- * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
- * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
- * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
- * SUCH DAMAGE.
- * 
- * The licence and distribution terms for any publically available version or
- * derivative of this code cannot be changed.  i.e. this code cannot simply be
- * copied and put under another distribution licence
- * [including the GNU Public Licence.]
- */
-
-#include <stdio.h>
-#include "cryptlib.h"
-#include <openssl/evp.h>
-#include <openssl/err.h>
-#include <openssl/rand.h>
-#ifndef OPENSSL_NO_ENGINE
-#include <openssl/engine.h>
-#endif
-#include "evp_locl.h"
-
-const char EVP_version[]="EVP" OPENSSL_VERSION_PTEXT;
-
-void EVP_CIPHER_CTX_init(EVP_CIPHER_CTX *ctx)
-	{
-	memset(ctx,0,sizeof(EVP_CIPHER_CTX));
-	/* ctx->cipher=NULL; */
-	}
-
-EVP_CIPHER_CTX *EVP_CIPHER_CTX_new(void)
-	{
-	EVP_CIPHER_CTX *ctx=OPENSSL_malloc(sizeof *ctx);
-	if (ctx)
-		EVP_CIPHER_CTX_init(ctx);
-	return ctx;
-	}
-
-int EVP_CipherInit(EVP_CIPHER_CTX *ctx, const EVP_CIPHER *cipher,
-	     const unsigned char *key, const unsigned char *iv, int enc)
-	{
-	if (cipher)
-		EVP_CIPHER_CTX_init(ctx);
-	return EVP_CipherInit_ex(ctx,cipher,NULL,key,iv,enc);
-	}
-
-int EVP_CipherInit_ex(EVP_CIPHER_CTX *ctx, const EVP_CIPHER *cipher, ENGINE *impl,
-	     const unsigned char *key, const unsigned char *iv, int enc)
-	{
-	if (enc == -1)
-		enc = ctx->encrypt;
-	else
-		{
-		if (enc)
-			enc = 1;
-		ctx->encrypt = enc;
-		}
-#ifndef OPENSSL_NO_ENGINE
-	/* Whether it's nice or not, "Inits" can be used on "Final"'d contexts
-	 * so this context may already have an ENGINE! Try to avoid releasing
-	 * the previous handle, re-querying for an ENGINE, and having a
-	 * reinitialisation, when it may all be unecessary. */
-	if (ctx->engine && ctx->cipher && (!cipher ||
-			(cipher && (cipher->nid == ctx->cipher->nid))))
-		goto skip_to_init;
-#endif
-	if (cipher)
-		{
-		/* Ensure a context left lying around from last time is cleared
-		 * (the previous check attempted to avoid this if the same
-		 * ENGINE and EVP_CIPHER could be used). */
-		EVP_CIPHER_CTX_cleanup(ctx);
-
-		/* Restore encrypt field: it is zeroed by cleanup */
-		ctx->encrypt = enc;
-#ifndef OPENSSL_NO_ENGINE
-		if(impl)
-			{
-			if (!ENGINE_init(impl))
-				{
-				EVPerr(EVP_F_EVP_CIPHERINIT_EX, EVP_R_INITIALIZATION_ERROR);
-				return 0;
-				}
-			}
-		else
-			/* Ask if an ENGINE is reserved for this job */
-			impl = ENGINE_get_cipher_engine(cipher->nid);
-		if(impl)
-			{
-			/* There's an ENGINE for this job ... (apparently) */
-			const EVP_CIPHER *c = ENGINE_get_cipher(impl, cipher->nid);
-			if(!c)
-				{
-				/* One positive side-effect of US's export
-				 * control history, is that we should at least
-				 * be able to avoid using US mispellings of
-				 * "initialisation"? */
-				EVPerr(EVP_F_EVP_CIPHERINIT_EX, EVP_R_INITIALIZATION_ERROR);
-				return 0;
-				}
-			/* We'll use the ENGINE's private cipher definition */
-			cipher = c;
-			/* Store the ENGINE functional reference so we know
-			 * 'cipher' came from an ENGINE and we need to release
-			 * it when done. */
-			ctx->engine = impl;
-			}
-		else
-			ctx->engine = NULL;
-#endif
-
-		ctx->cipher=cipher;
-		if (ctx->cipher->ctx_size)
-			{
-			ctx->cipher_data=OPENSSL_malloc(ctx->cipher->ctx_size);
-			if (!ctx->cipher_data)
-				{
-				EVPerr(EVP_F_EVP_CIPHERINIT_EX, ERR_R_MALLOC_FAILURE);
-				return 0;
-				}
-			}
-		else
-			{
-			ctx->cipher_data = NULL;
-			}
-		ctx->key_len = cipher->key_len;
-		ctx->flags = 0;
-		if(ctx->cipher->flags & EVP_CIPH_CTRL_INIT)
-			{
-			if(!EVP_CIPHER_CTX_ctrl(ctx, EVP_CTRL_INIT, 0, NULL))
-				{
-				EVPerr(EVP_F_EVP_CIPHERINIT_EX, EVP_R_INITIALIZATION_ERROR);
-				return 0;
-				}
-			}
-		}
-	else if(!ctx->cipher)
-		{
-		EVPerr(EVP_F_EVP_CIPHERINIT_EX, EVP_R_NO_CIPHER_SET);
-		return 0;
-		}
-#ifndef OPENSSL_NO_ENGINE
-skip_to_init:
-#endif
-	/* we assume block size is a power of 2 in *cryptUpdate */
-	OPENSSL_assert(ctx->cipher->block_size == 1
-	    || ctx->cipher->block_size == 8
-	    || ctx->cipher->block_size == 16);
-
-	if(!(EVP_CIPHER_CTX_flags(ctx) & EVP_CIPH_CUSTOM_IV)) {
-		switch(EVP_CIPHER_CTX_mode(ctx)) {
-
-			case EVP_CIPH_STREAM_CIPHER:
-			case EVP_CIPH_ECB_MODE:
-			break;
-
-			case EVP_CIPH_CFB_MODE:
-			case EVP_CIPH_OFB_MODE:
-
-			ctx->num = 0;
-
-			case EVP_CIPH_CBC_MODE:
-
-			OPENSSL_assert(EVP_CIPHER_CTX_iv_length(ctx) <=
-					(int)sizeof(ctx->iv));
-			if(iv) memcpy(ctx->oiv, iv, EVP_CIPHER_CTX_iv_length(ctx));
-			memcpy(ctx->iv, ctx->oiv, EVP_CIPHER_CTX_iv_length(ctx));
-			break;
-
-			default:
-			return 0;
-			break;
-		}
-	}
-
-	if(key || (ctx->cipher->flags & EVP_CIPH_ALWAYS_CALL_INIT)) {
-		if(!ctx->cipher->init(ctx,key,iv,enc)) return 0;
-	}
-	ctx->buf_len=0;
-	ctx->final_used=0;
-	ctx->block_mask=ctx->cipher->block_size-1;
-	return 1;
-	}
-
-int EVP_CipherUpdate(EVP_CIPHER_CTX *ctx, unsigned char *out, int *outl,
-	     const unsigned char *in, int inl)
-	{
-	if (ctx->encrypt)
-		return EVP_EncryptUpdate(ctx,out,outl,in,inl);
-	else	return EVP_DecryptUpdate(ctx,out,outl,in,inl);
-	}
-
-int EVP_CipherFinal_ex(EVP_CIPHER_CTX *ctx, unsigned char *out, int *outl)
-	{
-	if (ctx->encrypt)
-		return EVP_EncryptFinal_ex(ctx,out,outl);
-	else	return EVP_DecryptFinal_ex(ctx,out,outl);
-	}
-
-int EVP_CipherFinal(EVP_CIPHER_CTX *ctx, unsigned char *out, int *outl)
-	{
-	if (ctx->encrypt)
-		return EVP_EncryptFinal(ctx,out,outl);
-	else	return EVP_DecryptFinal(ctx,out,outl);
-	}
-
-int EVP_EncryptInit(EVP_CIPHER_CTX *ctx, const EVP_CIPHER *cipher,
-	     const unsigned char *key, const unsigned char *iv)
-	{
-	return EVP_CipherInit(ctx, cipher, key, iv, 1);
-	}
-
-int EVP_EncryptInit_ex(EVP_CIPHER_CTX *ctx,const EVP_CIPHER *cipher, ENGINE *impl,
-		const unsigned char *key, const unsigned char *iv)
-	{
-	return EVP_CipherInit_ex(ctx, cipher, impl, key, iv, 1);
-	}
-
-int EVP_DecryptInit(EVP_CIPHER_CTX *ctx, const EVP_CIPHER *cipher,
-	     const unsigned char *key, const unsigned char *iv)
-	{
-	return EVP_CipherInit(ctx, cipher, key, iv, 0);
-	}
-
-int EVP_DecryptInit_ex(EVP_CIPHER_CTX *ctx, const EVP_CIPHER *cipher, ENGINE *impl,
-	     const unsigned char *key, const unsigned char *iv)
-	{
-	return EVP_CipherInit_ex(ctx, cipher, impl, key, iv, 0);
-	}
-
-int EVP_EncryptUpdate(EVP_CIPHER_CTX *ctx, unsigned char *out, int *outl,
-	     const unsigned char *in, int inl)
-	{
-	int i,j,bl;
-
-	OPENSSL_assert(inl > 0);
-	if(ctx->buf_len == 0 && (inl&(ctx->block_mask)) == 0)
-		{
-		if(ctx->cipher->do_cipher(ctx,out,in,inl))
-			{
-			*outl=inl;
-			return 1;
-			}
-		else
-			{
-			*outl=0;
-			return 0;
-			}
-		}
-	i=ctx->buf_len;
-	bl=ctx->cipher->block_size;
-	OPENSSL_assert(bl <= (int)sizeof(ctx->buf));
-	if (i != 0)
-		{
-		if (i+inl < bl)
-			{
-			memcpy(&(ctx->buf[i]),in,inl);
-			ctx->buf_len+=inl;
-			*outl=0;
-			return 1;
-			}
-		else
-			{
-			j=bl-i;
-			memcpy(&(ctx->buf[i]),in,j);
-			if(!ctx->cipher->do_cipher(ctx,out,ctx->buf,bl)) return 0;
-			inl-=j;
-			in+=j;
-			out+=bl;
-			*outl=bl;
-			}
-		}
-	else
-		*outl = 0;
-	i=inl&(bl-1);
-	inl-=i;
-	if (inl > 0)
-		{
-		if(!ctx->cipher->do_cipher(ctx,out,in,inl)) return 0;
-		*outl+=inl;
-		}
-
-	if (i != 0)
-		memcpy(ctx->buf,&(in[inl]),i);
-	ctx->buf_len=i;
-	return 1;
-	}
-
-int EVP_EncryptFinal(EVP_CIPHER_CTX *ctx, unsigned char *out, int *outl)
-	{
-	int ret;
-	ret = EVP_EncryptFinal_ex(ctx, out, outl);
-	return ret;
-	}
-
-int EVP_EncryptFinal_ex(EVP_CIPHER_CTX *ctx, unsigned char *out, int *outl)
-	{
-	int n,ret;
-	unsigned int i, b, bl;
-
-	b=ctx->cipher->block_size;
-	OPENSSL_assert(b <= sizeof ctx->buf);
-	if (b == 1)
-		{
-		*outl=0;
-		return 1;
-		}
-	bl=ctx->buf_len;
-	if (ctx->flags & EVP_CIPH_NO_PADDING)
-		{
-		if(bl)
-			{
-			EVPerr(EVP_F_EVP_ENCRYPTFINAL_EX,EVP_R_DATA_NOT_MULTIPLE_OF_BLOCK_LENGTH);
-			return 0;
-			}
-		*outl = 0;
-		return 1;
-		}
-
-	n=b-bl;
-	for (i=bl; i<b; i++)
-		ctx->buf[i]=n;
-	ret=ctx->cipher->do_cipher(ctx,out,ctx->buf,b);
-
-
-	if(ret)
-		*outl=b;
-
-	return ret;
-	}
-
-int EVP_DecryptUpdate(EVP_CIPHER_CTX *ctx, unsigned char *out, int *outl,
-	     const unsigned char *in, int inl)
-	{
-	int fix_len;
-	unsigned int b;
-
-	if (inl == 0)
-		{
-		*outl=0;
-		return 1;
-		}
-
-	if (ctx->flags & EVP_CIPH_NO_PADDING)
-		return EVP_EncryptUpdate(ctx, out, outl, in, inl);
-
-	b=ctx->cipher->block_size;
-	OPENSSL_assert(b <= sizeof ctx->final);
-
-	if(ctx->final_used)
-		{
-		memcpy(out,ctx->final,b);
-		out+=b;
-		fix_len = 1;
-		}
-	else
-		fix_len = 0;
-
-
-	if(!EVP_EncryptUpdate(ctx,out,outl,in,inl))
-		return 0;
-
-	/* if we have 'decrypted' a multiple of block size, make sure
-	 * we have a copy of this last block */
-	if (b > 1 && !ctx->buf_len)
-		{
-		*outl-=b;
-		ctx->final_used=1;
-		memcpy(ctx->final,&out[*outl],b);
-		}
-	else
-		ctx->final_used = 0;
-
-	if (fix_len)
-		*outl += b;
-		
-	return 1;
-	}
-
-int EVP_DecryptFinal(EVP_CIPHER_CTX *ctx, unsigned char *out, int *outl)
-	{
-	int ret;
-	ret = EVP_DecryptFinal_ex(ctx, out, outl);
-	return ret;
-	}
-
-int EVP_DecryptFinal_ex(EVP_CIPHER_CTX *ctx, unsigned char *out, int *outl)
-	{
-	int i,n;
-	unsigned int b;
-
-	*outl=0;
-	b=ctx->cipher->block_size;
-	if (ctx->flags & EVP_CIPH_NO_PADDING)
-		{
-		if(ctx->buf_len)
-			{
-			EVPerr(EVP_F_EVP_DECRYPTFINAL_EX,EVP_R_DATA_NOT_MULTIPLE_OF_BLOCK_LENGTH);
-			return 0;
-			}
-		*outl = 0;
-		return 1;
-		}
-	if (b > 1)
-		{
-		if (ctx->buf_len || !ctx->final_used)
-			{
-			EVPerr(EVP_F_EVP_DECRYPTFINAL_EX,EVP_R_WRONG_FINAL_BLOCK_LENGTH);
-			return(0);
-			}
-		OPENSSL_assert(b <= sizeof ctx->final);
-		n=ctx->final[b-1];
-		if (n == 0 || n > (int)b)
-			{
-			EVPerr(EVP_F_EVP_DECRYPTFINAL_EX,EVP_R_BAD_DECRYPT);
-			return(0);
-			}
-		for (i=0; i<n; i++)
-			{
-			if (ctx->final[--b] != n)
-				{
-				EVPerr(EVP_F_EVP_DECRYPTFINAL_EX,EVP_R_BAD_DECRYPT);
-				return(0);
-				}
-			}
-		n=ctx->cipher->block_size-n;
-		for (i=0; i<n; i++)
-			out[i]=ctx->final[i];
-		*outl=n;
-		}
-	else
-		*outl=0;
-	return(1);
-	}
-
-void EVP_CIPHER_CTX_free(EVP_CIPHER_CTX *ctx)
-	{
-	if (ctx)
-		{
-		EVP_CIPHER_CTX_cleanup(ctx);
-		OPENSSL_free(ctx);
-		}
-	}
-
-int EVP_CIPHER_CTX_cleanup(EVP_CIPHER_CTX *c)
-	{
-	if (c->cipher != NULL)
-		{
-		if(c->cipher->cleanup && !c->cipher->cleanup(c))
-			return 0;
-		/* Cleanse cipher context data */
-		if (c->cipher_data)
-			OPENSSL_cleanse(c->cipher_data, c->cipher->ctx_size);
-		}
-	if (c->cipher_data)
-		OPENSSL_free(c->cipher_data);
-#ifndef OPENSSL_NO_ENGINE
-	if (c->engine)
-		/* The EVP_CIPHER we used belongs to an ENGINE, release the
-		 * functional reference we held for this reason. */
-		ENGINE_finish(c->engine);
-#endif
-	memset(c,0,sizeof(EVP_CIPHER_CTX));
-	return 1;
-	}
-
-int EVP_CIPHER_CTX_set_key_length(EVP_CIPHER_CTX *c, int keylen)
-	{
-	if(c->cipher->flags & EVP_CIPH_CUSTOM_KEY_LENGTH) 
-		return EVP_CIPHER_CTX_ctrl(c, EVP_CTRL_SET_KEY_LENGTH, keylen, NULL);
-	if(c->key_len == keylen) return 1;
-	if((keylen > 0) && (c->cipher->flags & EVP_CIPH_VARIABLE_LENGTH))
-		{
-		c->key_len = keylen;
-		return 1;
-		}
-	EVPerr(EVP_F_EVP_CIPHER_CTX_SET_KEY_LENGTH,EVP_R_INVALID_KEY_LENGTH);
-	return 0;
-	}
-
-int EVP_CIPHER_CTX_set_padding(EVP_CIPHER_CTX *ctx, int pad)
-	{
-	if (pad) ctx->flags &= ~EVP_CIPH_NO_PADDING;
-	else ctx->flags |= EVP_CIPH_NO_PADDING;
-	return 1;
-	}
-
-int EVP_CIPHER_CTX_ctrl(EVP_CIPHER_CTX *ctx, int type, int arg, void *ptr)
-{
-	int ret;
-	if(!ctx->cipher) {
-		EVPerr(EVP_F_EVP_CIPHER_CTX_CTRL, EVP_R_NO_CIPHER_SET);
-		return 0;
-	}
-
-	if(!ctx->cipher->ctrl) {
-		EVPerr(EVP_F_EVP_CIPHER_CTX_CTRL, EVP_R_CTRL_NOT_IMPLEMENTED);
-		return 0;
-	}
-
-	ret = ctx->cipher->ctrl(ctx, type, arg, ptr);
-	if(ret == -1) {
-		EVPerr(EVP_F_EVP_CIPHER_CTX_CTRL, EVP_R_CTRL_OPERATION_NOT_IMPLEMENTED);
-		return 0;
-	}
-	return ret;
-}
-
-int EVP_CIPHER_CTX_rand_key(EVP_CIPHER_CTX *ctx, unsigned char *key)
-	{
-	if (ctx->cipher->flags & EVP_CIPH_RAND_KEY)
-		return EVP_CIPHER_CTX_ctrl(ctx, EVP_CTRL_RAND_KEY, 0, key);
-	if (RAND_bytes(key, ctx->key_len) <= 0)
-		return 0;
-	return 1;
-	}
-
diff --git a/crypto/openssl/crypto/evp/evp_err.c b/crypto/openssl/crypto/evp/evp_err.c
deleted file mode 100644
index e8c9e8de9ca7..000000000000
--- a/crypto/openssl/crypto/evp/evp_err.c
+++ /dev/null
@@ -1,174 +0,0 @@
-/* crypto/evp/evp_err.c */
-/* ====================================================================
- * Copyright (c) 1999-2005 The OpenSSL Project.  All rights reserved.
- *
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions
- * are met:
- *
- * 1. Redistributions of source code must retain the above copyright
- *    notice, this list of conditions and the following disclaimer. 
- *
- * 2. Redistributions in binary form must reproduce the above copyright
- *    notice, this list of conditions and the following disclaimer in
- *    the documentation and/or other materials provided with the
- *    distribution.
- *
- * 3. All advertising materials mentioning features or use of this
- *    software must display the following acknowledgment:
- *    "This product includes software developed by the OpenSSL Project
- *    for use in the OpenSSL Toolkit. (http://www.OpenSSL.org/)"
- *
- * 4. The names "OpenSSL Toolkit" and "OpenSSL Project" must not be used to
- *    endorse or promote products derived from this software without
- *    prior written permission. For written permission, please contact
- *    openssl-core@OpenSSL.org.
- *
- * 5. Products derived from this software may not be called "OpenSSL"
- *    nor may "OpenSSL" appear in their names without prior written
- *    permission of the OpenSSL Project.
- *
- * 6. Redistributions of any form whatsoever must retain the following
- *    acknowledgment:
- *    "This product includes software developed by the OpenSSL Project
- *    for use in the OpenSSL Toolkit (http://www.OpenSSL.org/)"
- *
- * THIS SOFTWARE IS PROVIDED BY THE OpenSSL PROJECT ``AS IS'' AND ANY
- * EXPRESSED OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
- * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR
- * PURPOSE ARE DISCLAIMED.  IN NO EVENT SHALL THE OpenSSL PROJECT OR
- * ITS CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
- * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
- * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
- * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
- * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
- * STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
- * ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED
- * OF THE POSSIBILITY OF SUCH DAMAGE.
- * ====================================================================
- *
- * This product includes cryptographic software written by Eric Young
- * (eay@cryptsoft.com).  This product includes software written by Tim
- * Hudson (tjh@cryptsoft.com).
- *
- */
-
-/* NOTE: this file was auto generated by the mkerr.pl script: any changes
- * made to it will be overwritten when the script next updates this file,
- * only reason strings will be preserved.
- */
-
-#include <stdio.h>
-#include <openssl/err.h>
-#include <openssl/evp.h>
-
-/* BEGIN ERROR CODES */
-#ifndef OPENSSL_NO_ERR
-
-#define ERR_FUNC(func) ERR_PACK(ERR_LIB_EVP,func,0)
-#define ERR_REASON(reason) ERR_PACK(ERR_LIB_EVP,0,reason)
-
-static ERR_STRING_DATA EVP_str_functs[]=
-	{
-{ERR_FUNC(EVP_F_AES_INIT_KEY),	"AES_INIT_KEY"},
-{ERR_FUNC(EVP_F_CAMELLIA_INIT_KEY),	"CAMELLIA_INIT_KEY"},
-{ERR_FUNC(EVP_F_D2I_PKEY),	"D2I_PKEY"},
-{ERR_FUNC(EVP_F_DSAPKEY2PKCS8),	"DSAPKEY2PKCS8"},
-{ERR_FUNC(EVP_F_DSA_PKEY2PKCS8),	"DSA_PKEY2PKCS8"},
-{ERR_FUNC(EVP_F_ECDSA_PKEY2PKCS8),	"ECDSA_PKEY2PKCS8"},
-{ERR_FUNC(EVP_F_ECKEY_PKEY2PKCS8),	"ECKEY_PKEY2PKCS8"},
-{ERR_FUNC(EVP_F_EVP_CIPHERINIT_EX),	"EVP_CipherInit_ex"},
-{ERR_FUNC(EVP_F_EVP_CIPHER_CTX_CTRL),	"EVP_CIPHER_CTX_ctrl"},
-{ERR_FUNC(EVP_F_EVP_CIPHER_CTX_SET_KEY_LENGTH),	"EVP_CIPHER_CTX_set_key_length"},
-{ERR_FUNC(EVP_F_EVP_DECRYPTFINAL_EX),	"EVP_DecryptFinal_ex"},
-{ERR_FUNC(EVP_F_EVP_DIGESTINIT_EX),	"EVP_DigestInit_ex"},
-{ERR_FUNC(EVP_F_EVP_ENCRYPTFINAL_EX),	"EVP_EncryptFinal_ex"},
-{ERR_FUNC(EVP_F_EVP_MD_CTX_COPY_EX),	"EVP_MD_CTX_copy_ex"},
-{ERR_FUNC(EVP_F_EVP_OPENINIT),	"EVP_OpenInit"},
-{ERR_FUNC(EVP_F_EVP_PBE_ALG_ADD),	"EVP_PBE_alg_add"},
-{ERR_FUNC(EVP_F_EVP_PBE_CIPHERINIT),	"EVP_PBE_CipherInit"},
-{ERR_FUNC(EVP_F_EVP_PKCS82PKEY),	"EVP_PKCS82PKEY"},
-{ERR_FUNC(EVP_F_EVP_PKEY2PKCS8_BROKEN),	"EVP_PKEY2PKCS8_broken"},
-{ERR_FUNC(EVP_F_EVP_PKEY_COPY_PARAMETERS),	"EVP_PKEY_copy_parameters"},
-{ERR_FUNC(EVP_F_EVP_PKEY_DECRYPT),	"EVP_PKEY_decrypt"},
-{ERR_FUNC(EVP_F_EVP_PKEY_ENCRYPT),	"EVP_PKEY_encrypt"},
-{ERR_FUNC(EVP_F_EVP_PKEY_GET1_DH),	"EVP_PKEY_get1_DH"},
-{ERR_FUNC(EVP_F_EVP_PKEY_GET1_DSA),	"EVP_PKEY_get1_DSA"},
-{ERR_FUNC(EVP_F_EVP_PKEY_GET1_ECDSA),	"EVP_PKEY_GET1_ECDSA"},
-{ERR_FUNC(EVP_F_EVP_PKEY_GET1_EC_KEY),	"EVP_PKEY_get1_EC_KEY"},
-{ERR_FUNC(EVP_F_EVP_PKEY_GET1_RSA),	"EVP_PKEY_get1_RSA"},
-{ERR_FUNC(EVP_F_EVP_PKEY_NEW),	"EVP_PKEY_new"},
-{ERR_FUNC(EVP_F_EVP_RIJNDAEL),	"EVP_RIJNDAEL"},
-{ERR_FUNC(EVP_F_EVP_SIGNFINAL),	"EVP_SignFinal"},
-{ERR_FUNC(EVP_F_EVP_VERIFYFINAL),	"EVP_VerifyFinal"},
-{ERR_FUNC(EVP_F_PKCS5_PBE_KEYIVGEN),	"PKCS5_PBE_keyivgen"},
-{ERR_FUNC(EVP_F_PKCS5_V2_PBE_KEYIVGEN),	"PKCS5_v2_PBE_keyivgen"},
-{ERR_FUNC(EVP_F_PKCS8_SET_BROKEN),	"PKCS8_set_broken"},
-{ERR_FUNC(EVP_F_RC2_MAGIC_TO_METH),	"RC2_MAGIC_TO_METH"},
-{ERR_FUNC(EVP_F_RC5_CTRL),	"RC5_CTRL"},
-{0,NULL}
-	};
-
-static ERR_STRING_DATA EVP_str_reasons[]=
-	{
-{ERR_REASON(EVP_R_AES_KEY_SETUP_FAILED)  ,"aes key setup failed"},
-{ERR_REASON(EVP_R_ASN1_LIB)              ,"asn1 lib"},
-{ERR_REASON(EVP_R_BAD_BLOCK_LENGTH)      ,"bad block length"},
-{ERR_REASON(EVP_R_BAD_DECRYPT)           ,"bad decrypt"},
-{ERR_REASON(EVP_R_BAD_KEY_LENGTH)        ,"bad key length"},
-{ERR_REASON(EVP_R_BN_DECODE_ERROR)       ,"bn decode error"},
-{ERR_REASON(EVP_R_BN_PUBKEY_ERROR)       ,"bn pubkey error"},
-{ERR_REASON(EVP_R_CAMELLIA_KEY_SETUP_FAILED),"camellia key setup failed"},
-{ERR_REASON(EVP_R_CIPHER_PARAMETER_ERROR),"cipher parameter error"},
-{ERR_REASON(EVP_R_CTRL_NOT_IMPLEMENTED)  ,"ctrl not implemented"},
-{ERR_REASON(EVP_R_CTRL_OPERATION_NOT_IMPLEMENTED),"ctrl operation not implemented"},
-{ERR_REASON(EVP_R_DATA_NOT_MULTIPLE_OF_BLOCK_LENGTH),"data not multiple of block length"},
-{ERR_REASON(EVP_R_DECODE_ERROR)          ,"decode error"},
-{ERR_REASON(EVP_R_DIFFERENT_KEY_TYPES)   ,"different key types"},
-{ERR_REASON(EVP_R_ENCODE_ERROR)          ,"encode error"},
-{ERR_REASON(EVP_R_EVP_PBE_CIPHERINIT_ERROR),"evp pbe cipherinit error"},
-{ERR_REASON(EVP_R_EXPECTING_AN_RSA_KEY)  ,"expecting an rsa key"},
-{ERR_REASON(EVP_R_EXPECTING_A_DH_KEY)    ,"expecting a dh key"},
-{ERR_REASON(EVP_R_EXPECTING_A_DSA_KEY)   ,"expecting a dsa key"},
-{ERR_REASON(EVP_R_EXPECTING_A_ECDSA_KEY) ,"expecting a ecdsa key"},
-{ERR_REASON(EVP_R_EXPECTING_A_EC_KEY)    ,"expecting a ec key"},
-{ERR_REASON(EVP_R_INITIALIZATION_ERROR)  ,"initialization error"},
-{ERR_REASON(EVP_R_INPUT_NOT_INITIALIZED) ,"input not initialized"},
-{ERR_REASON(EVP_R_INVALID_KEY_LENGTH)    ,"invalid key length"},
-{ERR_REASON(EVP_R_IV_TOO_LARGE)          ,"iv too large"},
-{ERR_REASON(EVP_R_KEYGEN_FAILURE)        ,"keygen failure"},
-{ERR_REASON(EVP_R_MISSING_PARAMETERS)    ,"missing parameters"},
-{ERR_REASON(EVP_R_NO_CIPHER_SET)         ,"no cipher set"},
-{ERR_REASON(EVP_R_NO_DIGEST_SET)         ,"no digest set"},
-{ERR_REASON(EVP_R_NO_DSA_PARAMETERS)     ,"no dsa parameters"},
-{ERR_REASON(EVP_R_NO_SIGN_FUNCTION_CONFIGURED),"no sign function configured"},
-{ERR_REASON(EVP_R_NO_VERIFY_FUNCTION_CONFIGURED),"no verify function configured"},
-{ERR_REASON(EVP_R_PKCS8_UNKNOWN_BROKEN_TYPE),"pkcs8 unknown broken type"},
-{ERR_REASON(EVP_R_PUBLIC_KEY_NOT_RSA)    ,"public key not rsa"},
-{ERR_REASON(EVP_R_UNKNOWN_PBE_ALGORITHM) ,"unknown pbe algorithm"},
-{ERR_REASON(EVP_R_UNSUPORTED_NUMBER_OF_ROUNDS),"unsuported number of rounds"},
-{ERR_REASON(EVP_R_UNSUPPORTED_CIPHER)    ,"unsupported cipher"},
-{ERR_REASON(EVP_R_UNSUPPORTED_KEYLENGTH) ,"unsupported keylength"},
-{ERR_REASON(EVP_R_UNSUPPORTED_KEY_DERIVATION_FUNCTION),"unsupported key derivation function"},
-{ERR_REASON(EVP_R_UNSUPPORTED_KEY_SIZE)  ,"unsupported key size"},
-{ERR_REASON(EVP_R_UNSUPPORTED_PRF)       ,"unsupported prf"},
-{ERR_REASON(EVP_R_UNSUPPORTED_PRIVATE_KEY_ALGORITHM),"unsupported private key algorithm"},
-{ERR_REASON(EVP_R_UNSUPPORTED_SALT_TYPE) ,"unsupported salt type"},
-{ERR_REASON(EVP_R_WRONG_FINAL_BLOCK_LENGTH),"wrong final block length"},
-{ERR_REASON(EVP_R_WRONG_PUBLIC_KEY_TYPE) ,"wrong public key type"},
-{0,NULL}
-	};
-
-#endif
-
-void ERR_load_EVP_strings(void)
-	{
-#ifndef OPENSSL_NO_ERR
-
-	if (ERR_func_error_string(EVP_str_functs[0].error) == NULL)
-		{
-		ERR_load_strings(0,EVP_str_functs);
-		ERR_load_strings(0,EVP_str_reasons);
-		}
-#endif
-	}
diff --git a/crypto/openssl/crypto/evp/evp_key.c b/crypto/openssl/crypto/evp/evp_key.c
deleted file mode 100644
index 361ea69ab6d5..000000000000
--- a/crypto/openssl/crypto/evp/evp_key.c
+++ /dev/null
@@ -1,175 +0,0 @@
-/* crypto/evp/evp_key.c */
-/* Copyright (C) 1995-1998 Eric Young (eay@cryptsoft.com)
- * All rights reserved.
- *
- * This package is an SSL implementation written
- * by Eric Young (eay@cryptsoft.com).
- * The implementation was written so as to conform with Netscapes SSL.
- * 
- * This library is free for commercial and non-commercial use as long as
- * the following conditions are aheared to.  The following conditions
- * apply to all code found in this distribution, be it the RC4, RSA,
- * lhash, DES, etc., code; not just the SSL code.  The SSL documentation
- * included with this distribution is covered by the same copyright terms
- * except that the holder is Tim Hudson (tjh@cryptsoft.com).
- * 
- * Copyright remains Eric Young's, and as such any Copyright notices in
- * the code are not to be removed.
- * If this package is used in a product, Eric Young should be given attribution
- * as the author of the parts of the library used.
- * This can be in the form of a textual message at program startup or
- * in documentation (online or textual) provided with the package.
- * 
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions
- * are met:
- * 1. Redistributions of source code must retain the copyright
- *    notice, this list of conditions and the following disclaimer.
- * 2. Redistributions in binary form must reproduce the above copyright
- *    notice, this list of conditions and the following disclaimer in the
- *    documentation and/or other materials provided with the distribution.
- * 3. All advertising materials mentioning features or use of this software
- *    must display the following acknowledgement:
- *    "This product includes cryptographic software written by
- *     Eric Young (eay@cryptsoft.com)"
- *    The word 'cryptographic' can be left out if the rouines from the library
- *    being used are not cryptographic related :-).
- * 4. If you include any Windows specific code (or a derivative thereof) from 
- *    the apps directory (application code) you must include an acknowledgement:
- *    "This product includes software written by Tim Hudson (tjh@cryptsoft.com)"
- * 
- * THIS SOFTWARE IS PROVIDED BY ERIC YOUNG ``AS IS'' AND
- * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
- * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
- * ARE DISCLAIMED.  IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE
- * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
- * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
- * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
- * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
- * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
- * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
- * SUCH DAMAGE.
- * 
- * The licence and distribution terms for any publically available version or
- * derivative of this code cannot be changed.  i.e. this code cannot simply be
- * copied and put under another distribution licence
- * [including the GNU Public Licence.]
- */
-
-#include <stdio.h>
-#include "cryptlib.h"
-#include <openssl/x509.h>
-#include <openssl/objects.h>
-#include <openssl/evp.h>
-#include <openssl/ui.h>
-
-/* should be init to zeros. */
-static char prompt_string[80];
-
-void EVP_set_pw_prompt(const char *prompt)
-	{
-	if (prompt == NULL)
-		prompt_string[0]='\0';
-	else
-		{
-		strncpy(prompt_string,prompt,79);
-		prompt_string[79]='\0';
-		}
-	}
-
-char *EVP_get_pw_prompt(void)
-	{
-	if (prompt_string[0] == '\0')
-		return(NULL);
-	else
-		return(prompt_string);
-	}
-
-/* For historical reasons, the standard function for reading passwords is
- * in the DES library -- if someone ever wants to disable DES,
- * this function will fail */
-int EVP_read_pw_string(char *buf, int len, const char *prompt, int verify)
-	{
-	int ret;
-	char buff[BUFSIZ];
-	UI *ui;
-
-	if ((prompt == NULL) && (prompt_string[0] != '\0'))
-		prompt=prompt_string;
-	ui = UI_new();
-	UI_add_input_string(ui,prompt,0,buf,0,(len>=BUFSIZ)?BUFSIZ-1:len);
-	if (verify)
-		UI_add_verify_string(ui,prompt,0,
-			buff,0,(len>=BUFSIZ)?BUFSIZ-1:len,buf);
-	ret = UI_process(ui);
-	UI_free(ui);
-	OPENSSL_cleanse(buff,BUFSIZ);
-	return ret;
-	}
-
-int EVP_BytesToKey(const EVP_CIPHER *type, const EVP_MD *md, 
-	     const unsigned char *salt, const unsigned char *data, int datal,
-	     int count, unsigned char *key, unsigned char *iv)
-	{
-	EVP_MD_CTX c;
-	unsigned char md_buf[EVP_MAX_MD_SIZE];
-	int niv,nkey,addmd=0;
-	unsigned int mds=0,i;
-
-	nkey=type->key_len;
-	niv=type->iv_len;
-	OPENSSL_assert(nkey <= EVP_MAX_KEY_LENGTH);
-	OPENSSL_assert(niv <= EVP_MAX_IV_LENGTH);
-
-	if (data == NULL) return(nkey);
-
-	EVP_MD_CTX_init(&c);
-	for (;;)
-		{
-		if (!EVP_DigestInit_ex(&c,md, NULL))
-			return 0;
-		if (addmd++)
-			EVP_DigestUpdate(&c,&(md_buf[0]),mds);
-		EVP_DigestUpdate(&c,data,datal);
-		if (salt != NULL)
-			EVP_DigestUpdate(&c,salt,PKCS5_SALT_LEN);
-		EVP_DigestFinal_ex(&c,&(md_buf[0]),&mds);
-
-		for (i=1; i<(unsigned int)count; i++)
-			{
-			EVP_DigestInit_ex(&c,md, NULL);
-			EVP_DigestUpdate(&c,&(md_buf[0]),mds);
-			EVP_DigestFinal_ex(&c,&(md_buf[0]),&mds);
-			}
-		i=0;
-		if (nkey)
-			{
-			for (;;)
-				{
-				if (nkey == 0) break;
-				if (i == mds) break;
-				if (key != NULL)
-					*(key++)=md_buf[i];
-				nkey--;
-				i++;
-				}
-			}
-		if (niv && (i != mds))
-			{
-			for (;;)
-				{
-				if (niv == 0) break;
-				if (i == mds) break;
-				if (iv != NULL)
-					*(iv++)=md_buf[i];
-				niv--;
-				i++;
-				}
-			}
-		if ((nkey == 0) && (niv == 0)) break;
-		}
-	EVP_MD_CTX_cleanup(&c);
-	OPENSSL_cleanse(&(md_buf[0]),EVP_MAX_MD_SIZE);
-	return(type->key_len);
-	}
-
diff --git a/crypto/openssl/crypto/evp/evp_lib.c b/crypto/openssl/crypto/evp/evp_lib.c
deleted file mode 100644
index edb28ef38ed7..000000000000
--- a/crypto/openssl/crypto/evp/evp_lib.c
+++ /dev/null
@@ -1,279 +0,0 @@
-/* crypto/evp/evp_lib.c */
-/* Copyright (C) 1995-1998 Eric Young (eay@cryptsoft.com)
- * All rights reserved.
- *
- * This package is an SSL implementation written
- * by Eric Young (eay@cryptsoft.com).
- * The implementation was written so as to conform with Netscapes SSL.
- * 
- * This library is free for commercial and non-commercial use as long as
- * the following conditions are aheared to.  The following conditions
- * apply to all code found in this distribution, be it the RC4, RSA,
- * lhash, DES, etc., code; not just the SSL code.  The SSL documentation
- * included with this distribution is covered by the same copyright terms
- * except that the holder is Tim Hudson (tjh@cryptsoft.com).
- * 
- * Copyright remains Eric Young's, and as such any Copyright notices in
- * the code are not to be removed.
- * If this package is used in a product, Eric Young should be given attribution
- * as the author of the parts of the library used.
- * This can be in the form of a textual message at program startup or
- * in documentation (online or textual) provided with the package.
- * 
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions
- * are met:
- * 1. Redistributions of source code must retain the copyright
- *    notice, this list of conditions and the following disclaimer.
- * 2. Redistributions in binary form must reproduce the above copyright
- *    notice, this list of conditions and the following disclaimer in the
- *    documentation and/or other materials provided with the distribution.
- * 3. All advertising materials mentioning features or use of this software
- *    must display the following acknowledgement:
- *    "This product includes cryptographic software written by
- *     Eric Young (eay@cryptsoft.com)"
- *    The word 'cryptographic' can be left out if the rouines from the library
- *    being used are not cryptographic related :-).
- * 4. If you include any Windows specific code (or a derivative thereof) from 
- *    the apps directory (application code) you must include an acknowledgement:
- *    "This product includes software written by Tim Hudson (tjh@cryptsoft.com)"
- * 
- * THIS SOFTWARE IS PROVIDED BY ERIC YOUNG ``AS IS'' AND
- * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
- * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
- * ARE DISCLAIMED.  IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE
- * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
- * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
- * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
- * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
- * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
- * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
- * SUCH DAMAGE.
- * 
- * The licence and distribution terms for any publically available version or
- * derivative of this code cannot be changed.  i.e. this code cannot simply be
- * copied and put under another distribution licence
- * [including the GNU Public Licence.]
- */
-
-#include <stdio.h>
-#include "cryptlib.h"
-#include <openssl/evp.h>
-#include <openssl/objects.h>
-
-int EVP_CIPHER_param_to_asn1(EVP_CIPHER_CTX *c, ASN1_TYPE *type)
-	{
-	int ret;
-
-	if (c->cipher->set_asn1_parameters != NULL)
-		ret=c->cipher->set_asn1_parameters(c,type);
-	else
-		ret=-1;
-	return(ret);
-	}
-
-int EVP_CIPHER_asn1_to_param(EVP_CIPHER_CTX *c, ASN1_TYPE *type)
-	{
-	int ret;
-
-	if (c->cipher->get_asn1_parameters != NULL)
-		ret=c->cipher->get_asn1_parameters(c,type);
-	else
-		ret=-1;
-	return(ret);
-	}
-
-int EVP_CIPHER_get_asn1_iv(EVP_CIPHER_CTX *c, ASN1_TYPE *type)
-	{
-	int i=0;
-	unsigned int l;
-
-	if (type != NULL) 
-		{
-		l=EVP_CIPHER_CTX_iv_length(c);
-		OPENSSL_assert(l <= sizeof(c->iv));
-		i=ASN1_TYPE_get_octetstring(type,c->oiv,l);
-		if (i != (int)l)
-			return(-1);
-		else if (i > 0)
-			memcpy(c->iv,c->oiv,l);
-		}
-	return(i);
-	}
-
-int EVP_CIPHER_set_asn1_iv(EVP_CIPHER_CTX *c, ASN1_TYPE *type)
-	{
-	int i=0;
-	unsigned int j;
-
-	if (type != NULL)
-		{
-		j=EVP_CIPHER_CTX_iv_length(c);
-		OPENSSL_assert(j <= sizeof(c->iv));
-		i=ASN1_TYPE_set_octetstring(type,c->oiv,j);
-		}
-	return(i);
-	}
-
-/* Convert the various cipher NIDs and dummies to a proper OID NID */
-int EVP_CIPHER_type(const EVP_CIPHER *ctx)
-{
-	int nid;
-	ASN1_OBJECT *otmp;
-	nid = EVP_CIPHER_nid(ctx);
-
-	switch(nid) {
-
-		case NID_rc2_cbc:
-		case NID_rc2_64_cbc:
-		case NID_rc2_40_cbc:
-
-		return NID_rc2_cbc;
-
-		case NID_rc4:
-		case NID_rc4_40:
-
-		return NID_rc4;
-
-		case NID_aes_128_cfb128:
-		case NID_aes_128_cfb8:
-		case NID_aes_128_cfb1:
-
-		return NID_aes_128_cfb128;
-
-		case NID_aes_192_cfb128:
-		case NID_aes_192_cfb8:
-		case NID_aes_192_cfb1:
-
-		return NID_aes_192_cfb128;
-
-		case NID_aes_256_cfb128:
-		case NID_aes_256_cfb8:
-		case NID_aes_256_cfb1:
-
-		return NID_aes_256_cfb128;
-
-		case NID_des_cfb64:
-		case NID_des_cfb8:
-		case NID_des_cfb1:
-
-		return NID_des_cfb64;
-
-		default:
-		/* Check it has an OID and it is valid */
-		otmp = OBJ_nid2obj(nid);
-		if(!otmp || !otmp->data) nid = NID_undef;
-		ASN1_OBJECT_free(otmp);
-		return nid;
-	}
-}
-
-int EVP_CIPHER_block_size(const EVP_CIPHER *e)
-	{
-	return e->block_size;
-	}
-
-int EVP_CIPHER_CTX_block_size(const EVP_CIPHER_CTX *ctx)
-	{
-	return ctx->cipher->block_size;
-	}
-
-int EVP_Cipher(EVP_CIPHER_CTX *ctx, unsigned char *out, const unsigned char *in, unsigned int inl)
-	{
-	return ctx->cipher->do_cipher(ctx,out,in,inl);
-	}
-
-const EVP_CIPHER *EVP_CIPHER_CTX_cipher(const EVP_CIPHER_CTX *ctx)
-	{
-	return ctx->cipher;
-	}
-
-unsigned long EVP_CIPHER_flags(const EVP_CIPHER *cipher)
-	{
-	return cipher->flags;
-	}
-
-unsigned long EVP_CIPHER_CTX_flags(const EVP_CIPHER_CTX *ctx)
-	{
-	return ctx->cipher->flags;
-	}
-
-void *EVP_CIPHER_CTX_get_app_data(const EVP_CIPHER_CTX *ctx)
-	{
-	return ctx->app_data;
-	}
-
-void EVP_CIPHER_CTX_set_app_data(EVP_CIPHER_CTX *ctx, void *data)
-	{
-	ctx->app_data = data;
-	}
-
-int EVP_CIPHER_iv_length(const EVP_CIPHER *cipher)
-	{
-	return cipher->iv_len;
-	}
-
-int EVP_CIPHER_CTX_iv_length(const EVP_CIPHER_CTX *ctx)
-	{
-	return ctx->cipher->iv_len;
-	}
-
-int EVP_CIPHER_key_length(const EVP_CIPHER *cipher)
-	{
-	return cipher->key_len;
-	}
-
-int EVP_CIPHER_CTX_key_length(const EVP_CIPHER_CTX *ctx)
-	{
-	return ctx->key_len;
-	}
-
-int EVP_CIPHER_nid(const EVP_CIPHER *cipher)
-	{
-	return cipher->nid;
-	}
-
-int EVP_CIPHER_CTX_nid(const EVP_CIPHER_CTX *ctx)
-	{
-	return ctx->cipher->nid;
-	}
-
-int EVP_MD_block_size(const EVP_MD *md) 
-	{
-	return md->block_size;
-	}
-
-int EVP_MD_type(const EVP_MD *md)
-	{
-	return md->type;
-	}
-
-int EVP_MD_pkey_type(const EVP_MD *md)
-	{
-	return md->pkey_type;
-	}
-
-int EVP_MD_size(const EVP_MD *md)
-	{
-	return md->md_size;
-	}
-
-const EVP_MD * EVP_MD_CTX_md(const EVP_MD_CTX *ctx)
-	{
-	return ctx->digest;
-	}
-
-void EVP_MD_CTX_set_flags(EVP_MD_CTX *ctx, int flags)
-	{
-	ctx->flags |= flags;
-	}
-
-void EVP_MD_CTX_clear_flags(EVP_MD_CTX *ctx, int flags)
-	{
-	ctx->flags &= ~flags;
-	}
-
-int EVP_MD_CTX_test_flags(const EVP_MD_CTX *ctx, int flags)
-	{
-	return (ctx->flags & flags);
-	}
diff --git a/crypto/openssl/crypto/evp/evp_locl.h b/crypto/openssl/crypto/evp/evp_locl.h
deleted file mode 100644
index 20139d20e41a..000000000000
--- a/crypto/openssl/crypto/evp/evp_locl.h
+++ /dev/null
@@ -1,236 +0,0 @@
-/* evp_locl.h */
-/* Written by Dr Stephen N Henson (shenson@bigfoot.com) for the OpenSSL
- * project 2000.
- */
-/* ====================================================================
- * Copyright (c) 1999 The OpenSSL Project.  All rights reserved.
- *
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions
- * are met:
- *
- * 1. Redistributions of source code must retain the above copyright
- *    notice, this list of conditions and the following disclaimer. 
- *
- * 2. Redistributions in binary form must reproduce the above copyright
- *    notice, this list of conditions and the following disclaimer in
- *    the documentation and/or other materials provided with the
- *    distribution.
- *
- * 3. All advertising materials mentioning features or use of this
- *    software must display the following acknowledgment:
- *    "This product includes software developed by the OpenSSL Project
- *    for use in the OpenSSL Toolkit. (http://www.OpenSSL.org/)"
- *
- * 4. The names "OpenSSL Toolkit" and "OpenSSL Project" must not be used to
- *    endorse or promote products derived from this software without
- *    prior written permission. For written permission, please contact
- *    licensing@OpenSSL.org.
- *
- * 5. Products derived from this software may not be called "OpenSSL"
- *    nor may "OpenSSL" appear in their names without prior written
- *    permission of the OpenSSL Project.
- *
- * 6. Redistributions of any form whatsoever must retain the following
- *    acknowledgment:
- *    "This product includes software developed by the OpenSSL Project
- *    for use in the OpenSSL Toolkit (http://www.OpenSSL.org/)"
- *
- * THIS SOFTWARE IS PROVIDED BY THE OpenSSL PROJECT ``AS IS'' AND ANY
- * EXPRESSED OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
- * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR
- * PURPOSE ARE DISCLAIMED.  IN NO EVENT SHALL THE OpenSSL PROJECT OR
- * ITS CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
- * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
- * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
- * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
- * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
- * STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
- * ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED
- * OF THE POSSIBILITY OF SUCH DAMAGE.
- * ====================================================================
- *
- * This product includes cryptographic software written by Eric Young
- * (eay@cryptsoft.com).  This product includes software written by Tim
- * Hudson (tjh@cryptsoft.com).
- *
- */
-
-/* Macros to code block cipher wrappers */
-
-/* Wrapper functions for each cipher mode */
-
-#define BLOCK_CIPHER_ecb_loop() \
-	unsigned int i, bl; \
-	bl = ctx->cipher->block_size;\
-	if(inl < bl) return 1;\
-	inl -= bl; \
-	for(i=0; i <= inl; i+=bl) 
-
-#define BLOCK_CIPHER_func_ecb(cname, cprefix, kstruct, ksched) \
-static int cname##_ecb_cipher(EVP_CIPHER_CTX *ctx, unsigned char *out, const unsigned char *in, unsigned int inl) \
-{\
-	BLOCK_CIPHER_ecb_loop() \
-		cprefix##_ecb_encrypt(in + i, out + i, &((kstruct *)ctx->cipher_data)->ksched, ctx->encrypt);\
-	return 1;\
-}
-
-#define BLOCK_CIPHER_func_ofb(cname, cprefix, cbits, kstruct, ksched) \
-static int cname##_ofb_cipher(EVP_CIPHER_CTX *ctx, unsigned char *out, const unsigned char *in, unsigned int inl) \
-{\
-	cprefix##_ofb##cbits##_encrypt(in, out, (long)inl, &((kstruct *)ctx->cipher_data)->ksched, ctx->iv, &ctx->num);\
-	return 1;\
-}
-
-#define BLOCK_CIPHER_func_cbc(cname, cprefix, kstruct, ksched) \
-static int cname##_cbc_cipher(EVP_CIPHER_CTX *ctx, unsigned char *out, const unsigned char *in, unsigned int inl) \
-{\
-	cprefix##_cbc_encrypt(in, out, (long)inl, &((kstruct *)ctx->cipher_data)->ksched, ctx->iv, ctx->encrypt);\
-	return 1;\
-}
-
-#define BLOCK_CIPHER_func_cfb(cname, cprefix, cbits, kstruct, ksched) \
-static int cname##_cfb##cbits##_cipher(EVP_CIPHER_CTX *ctx, unsigned char *out, const unsigned char *in, unsigned int inl) \
-{\
-	cprefix##_cfb##cbits##_encrypt(in, out, (long)inl, &((kstruct *)ctx->cipher_data)->ksched, ctx->iv, &ctx->num, ctx->encrypt);\
-	return 1;\
-}
-
-#define BLOCK_CIPHER_all_funcs(cname, cprefix, cbits, kstruct, ksched) \
-	BLOCK_CIPHER_func_cbc(cname, cprefix, kstruct, ksched) \
-	BLOCK_CIPHER_func_cfb(cname, cprefix, cbits, kstruct, ksched) \
-	BLOCK_CIPHER_func_ecb(cname, cprefix, kstruct, ksched) \
-	BLOCK_CIPHER_func_ofb(cname, cprefix, cbits, kstruct, ksched)
-
-#define BLOCK_CIPHER_def1(cname, nmode, mode, MODE, kstruct, nid, block_size, \
-			  key_len, iv_len, flags, init_key, cleanup, \
-			  set_asn1, get_asn1, ctrl) \
-static const EVP_CIPHER cname##_##mode = { \
-	nid##_##nmode, block_size, key_len, iv_len, \
-	flags | EVP_CIPH_##MODE##_MODE, \
-	init_key, \
-	cname##_##mode##_cipher, \
-	cleanup, \
-	sizeof(kstruct), \
-	set_asn1, get_asn1,\
-	ctrl, \
-	NULL \
-}; \
-const EVP_CIPHER *EVP_##cname##_##mode(void) { return &cname##_##mode; }
-
-#define BLOCK_CIPHER_def_cbc(cname, kstruct, nid, block_size, key_len, \
-			     iv_len, flags, init_key, cleanup, set_asn1, \
-			     get_asn1, ctrl) \
-BLOCK_CIPHER_def1(cname, cbc, cbc, CBC, kstruct, nid, block_size, key_len, \
-		  iv_len, flags, init_key, cleanup, set_asn1, get_asn1, ctrl)
-
-#define BLOCK_CIPHER_def_cfb(cname, kstruct, nid, key_len, \
-			     iv_len, cbits, flags, init_key, cleanup, \
-			     set_asn1, get_asn1, ctrl) \
-BLOCK_CIPHER_def1(cname, cfb##cbits, cfb##cbits, CFB, kstruct, nid, 1, \
-		  key_len, iv_len, flags, init_key, cleanup, set_asn1, \
-		  get_asn1, ctrl)
-
-#define BLOCK_CIPHER_def_ofb(cname, kstruct, nid, key_len, \
-			     iv_len, cbits, flags, init_key, cleanup, \
-			     set_asn1, get_asn1, ctrl) \
-BLOCK_CIPHER_def1(cname, ofb##cbits, ofb, OFB, kstruct, nid, 1, \
-		  key_len, iv_len, flags, init_key, cleanup, set_asn1, \
-		  get_asn1, ctrl)
-
-#define BLOCK_CIPHER_def_ecb(cname, kstruct, nid, block_size, key_len, \
-			     iv_len, flags, init_key, cleanup, set_asn1, \
-			     get_asn1, ctrl) \
-BLOCK_CIPHER_def1(cname, ecb, ecb, ECB, kstruct, nid, block_size, key_len, \
-		  iv_len, flags, init_key, cleanup, set_asn1, get_asn1, ctrl)
-
-#define BLOCK_CIPHER_defs(cname, kstruct, \
-			  nid, block_size, key_len, iv_len, cbits, flags, \
-			  init_key, cleanup, set_asn1, get_asn1, ctrl) \
-BLOCK_CIPHER_def_cbc(cname, kstruct, nid, block_size, key_len, iv_len, flags, \
-		     init_key, cleanup, set_asn1, get_asn1, ctrl) \
-BLOCK_CIPHER_def_cfb(cname, kstruct, nid, key_len, iv_len, cbits, \
-		     flags, init_key, cleanup, set_asn1, get_asn1, ctrl) \
-BLOCK_CIPHER_def_ofb(cname, kstruct, nid, key_len, iv_len, cbits, \
-		     flags, init_key, cleanup, set_asn1, get_asn1, ctrl) \
-BLOCK_CIPHER_def_ecb(cname, kstruct, nid, block_size, key_len, iv_len, flags, \
-		     init_key, cleanup, set_asn1, get_asn1, ctrl)
-
-
-/*
-#define BLOCK_CIPHER_defs(cname, kstruct, \
-				nid, block_size, key_len, iv_len, flags,\
-				 init_key, cleanup, set_asn1, get_asn1, ctrl)\
-static const EVP_CIPHER cname##_cbc = {\
-	nid##_cbc, block_size, key_len, iv_len, \
-	flags | EVP_CIPH_CBC_MODE,\
-	init_key,\
-	cname##_cbc_cipher,\
-	cleanup,\
-	sizeof(EVP_CIPHER_CTX)-sizeof((((EVP_CIPHER_CTX *)NULL)->c))+\
-		sizeof((((EVP_CIPHER_CTX *)NULL)->c.kstruct)),\
-	set_asn1, get_asn1,\
-	ctrl, \
-	NULL \
-};\
-const EVP_CIPHER *EVP_##cname##_cbc(void) { return &cname##_cbc; }\
-static const EVP_CIPHER cname##_cfb = {\
-	nid##_cfb64, 1, key_len, iv_len, \
-	flags | EVP_CIPH_CFB_MODE,\
-	init_key,\
-	cname##_cfb_cipher,\
-	cleanup,\
-	sizeof(EVP_CIPHER_CTX)-sizeof((((EVP_CIPHER_CTX *)NULL)->c))+\
-		sizeof((((EVP_CIPHER_CTX *)NULL)->c.kstruct)),\
-	set_asn1, get_asn1,\
-	ctrl,\
-	NULL \
-};\
-const EVP_CIPHER *EVP_##cname##_cfb(void) { return &cname##_cfb; }\
-static const EVP_CIPHER cname##_ofb = {\
-	nid##_ofb64, 1, key_len, iv_len, \
-	flags | EVP_CIPH_OFB_MODE,\
-	init_key,\
-	cname##_ofb_cipher,\
-	cleanup,\
-	sizeof(EVP_CIPHER_CTX)-sizeof((((EVP_CIPHER_CTX *)NULL)->c))+\
-		sizeof((((EVP_CIPHER_CTX *)NULL)->c.kstruct)),\
-	set_asn1, get_asn1,\
-	ctrl,\
-	NULL \
-};\
-const EVP_CIPHER *EVP_##cname##_ofb(void) { return &cname##_ofb; }\
-static const EVP_CIPHER cname##_ecb = {\
-	nid##_ecb, block_size, key_len, iv_len, \
-	flags | EVP_CIPH_ECB_MODE,\
-	init_key,\
-	cname##_ecb_cipher,\
-	cleanup,\
-	sizeof(EVP_CIPHER_CTX)-sizeof((((EVP_CIPHER_CTX *)NULL)->c))+\
-		sizeof((((EVP_CIPHER_CTX *)NULL)->c.kstruct)),\
-	set_asn1, get_asn1,\
-	ctrl,\
-	NULL \
-};\
-const EVP_CIPHER *EVP_##cname##_ecb(void) { return &cname##_ecb; }
-*/
-
-#define IMPLEMENT_BLOCK_CIPHER(cname, ksched, cprefix, kstruct, nid, \
-			       block_size, key_len, iv_len, cbits, \
-			       flags, init_key, \
-			       cleanup, set_asn1, get_asn1, ctrl) \
-	BLOCK_CIPHER_all_funcs(cname, cprefix, cbits, kstruct, ksched) \
-	BLOCK_CIPHER_defs(cname, kstruct, nid, block_size, key_len, iv_len, \
-			  cbits, flags, init_key, cleanup, set_asn1, \
-			  get_asn1, ctrl)
-
-#define EVP_C_DATA(kstruct, ctx)	((kstruct *)(ctx)->cipher_data)
-
-#define IMPLEMENT_CFBR(cipher,cprefix,kstruct,ksched,keysize,cbits,iv_len) \
-	BLOCK_CIPHER_func_cfb(cipher##_##keysize,cprefix,cbits,kstruct,ksched) \
-	BLOCK_CIPHER_def_cfb(cipher##_##keysize,kstruct, \
-			     NID_##cipher##_##keysize, keysize/8, iv_len, cbits, \
-			     0, cipher##_init_key, NULL, \
-			     EVP_CIPHER_set_asn1_iv, \
-			     EVP_CIPHER_get_asn1_iv, \
-			     NULL)
diff --git a/crypto/openssl/crypto/evp/evp_pbe.c b/crypto/openssl/crypto/evp/evp_pbe.c
deleted file mode 100644
index c26d2de0f388..000000000000
--- a/crypto/openssl/crypto/evp/evp_pbe.c
+++ /dev/null
@@ -1,137 +0,0 @@
-/* evp_pbe.c */
-/* Written by Dr Stephen N Henson (shenson@bigfoot.com) for the OpenSSL
- * project 1999.
- */
-/* ====================================================================
- * Copyright (c) 1999 The OpenSSL Project.  All rights reserved.
- *
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions
- * are met:
- *
- * 1. Redistributions of source code must retain the above copyright
- *    notice, this list of conditions and the following disclaimer. 
- *
- * 2. Redistributions in binary form must reproduce the above copyright
- *    notice, this list of conditions and the following disclaimer in
- *    the documentation and/or other materials provided with the
- *    distribution.
- *
- * 3. All advertising materials mentioning features or use of this
- *    software must display the following acknowledgment:
- *    "This product includes software developed by the OpenSSL Project
- *    for use in the OpenSSL Toolkit. (http://www.OpenSSL.org/)"
- *
- * 4. The names "OpenSSL Toolkit" and "OpenSSL Project" must not be used to
- *    endorse or promote products derived from this software without
- *    prior written permission. For written permission, please contact
- *    licensing@OpenSSL.org.
- *
- * 5. Products derived from this software may not be called "OpenSSL"
- *    nor may "OpenSSL" appear in their names without prior written
- *    permission of the OpenSSL Project.
- *
- * 6. Redistributions of any form whatsoever must retain the following
- *    acknowledgment:
- *    "This product includes software developed by the OpenSSL Project
- *    for use in the OpenSSL Toolkit (http://www.OpenSSL.org/)"
- *
- * THIS SOFTWARE IS PROVIDED BY THE OpenSSL PROJECT ``AS IS'' AND ANY
- * EXPRESSED OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
- * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR
- * PURPOSE ARE DISCLAIMED.  IN NO EVENT SHALL THE OpenSSL PROJECT OR
- * ITS CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
- * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
- * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
- * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
- * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
- * STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
- * ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED
- * OF THE POSSIBILITY OF SUCH DAMAGE.
- * ====================================================================
- *
- * This product includes cryptographic software written by Eric Young
- * (eay@cryptsoft.com).  This product includes software written by Tim
- * Hudson (tjh@cryptsoft.com).
- *
- */
-
-#include <stdio.h>
-#include "cryptlib.h"
-#include <openssl/evp.h>
-#include <openssl/x509.h>
-
-/* Password based encryption (PBE) functions */
-
-static STACK *pbe_algs;
-
-/* Setup a cipher context from a PBE algorithm */
-
-typedef struct {
-int pbe_nid;
-const EVP_CIPHER *cipher;
-const EVP_MD *md;
-EVP_PBE_KEYGEN *keygen;
-} EVP_PBE_CTL;
-
-int EVP_PBE_CipherInit(ASN1_OBJECT *pbe_obj, const char *pass, int passlen,
-	     ASN1_TYPE *param, EVP_CIPHER_CTX *ctx, int en_de)
-{
-
-	EVP_PBE_CTL *pbetmp, pbelu;
-	int i;
-	pbelu.pbe_nid = OBJ_obj2nid(pbe_obj);
-	if (pbelu.pbe_nid != NID_undef) i = sk_find(pbe_algs, (char *)&pbelu);
-	else i = -1;
-
-	if (i == -1) {
-		char obj_tmp[80];
-		EVPerr(EVP_F_EVP_PBE_CIPHERINIT,EVP_R_UNKNOWN_PBE_ALGORITHM);
-		if (!pbe_obj) BUF_strlcpy (obj_tmp, "NULL", sizeof obj_tmp);
-		else i2t_ASN1_OBJECT(obj_tmp, sizeof obj_tmp, pbe_obj);
-		ERR_add_error_data(2, "TYPE=", obj_tmp);
-		return 0;
-	}
-	if(!pass) passlen = 0;
-	else if (passlen == -1) passlen = strlen(pass);
-	pbetmp = (EVP_PBE_CTL *)sk_value (pbe_algs, i);
-	i = (*pbetmp->keygen)(ctx, pass, passlen, param, pbetmp->cipher,
-						 pbetmp->md, en_de);
-	if (!i) {
-		EVPerr(EVP_F_EVP_PBE_CIPHERINIT,EVP_R_KEYGEN_FAILURE);
-		return 0;
-	}
-	return 1;	
-}
-
-static int pbe_cmp(const char * const *a, const char * const *b)
-{
-	const EVP_PBE_CTL * const *pbe1 = (const EVP_PBE_CTL * const *) a,
-			* const *pbe2 = (const EVP_PBE_CTL * const *)b;
-	return ((*pbe1)->pbe_nid - (*pbe2)->pbe_nid);
-}
-
-/* Add a PBE algorithm */
-
-int EVP_PBE_alg_add(int nid, const EVP_CIPHER *cipher, const EVP_MD *md,
-	     EVP_PBE_KEYGEN *keygen)
-{
-	EVP_PBE_CTL *pbe_tmp;
-	if (!pbe_algs) pbe_algs = sk_new(pbe_cmp);
-	if (!(pbe_tmp = (EVP_PBE_CTL*) OPENSSL_malloc (sizeof(EVP_PBE_CTL)))) {
-		EVPerr(EVP_F_EVP_PBE_ALG_ADD,ERR_R_MALLOC_FAILURE);
-		return 0;
-	}
-	pbe_tmp->pbe_nid = nid;
-	pbe_tmp->cipher = cipher;
-	pbe_tmp->md = md;
-	pbe_tmp->keygen = keygen;
-	sk_push (pbe_algs, (char *)pbe_tmp);
-	return 1;
-}
-
-void EVP_PBE_cleanup(void)
-{
-	sk_pop_free(pbe_algs, OPENSSL_freeFunc);
-	pbe_algs = NULL;
-}
diff --git a/crypto/openssl/crypto/evp/evp_pkey.c b/crypto/openssl/crypto/evp/evp_pkey.c
deleted file mode 100644
index 0147f3e02a68..000000000000
--- a/crypto/openssl/crypto/evp/evp_pkey.c
+++ /dev/null
@@ -1,794 +0,0 @@
-/* evp_pkey.c */
-/* Written by Dr Stephen N Henson (shenson@bigfoot.com) for the OpenSSL
- * project 1999.
- */
-/* ====================================================================
- * Copyright (c) 1999-2002 The OpenSSL Project.  All rights reserved.
- *
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions
- * are met:
- *
- * 1. Redistributions of source code must retain the above copyright
- *    notice, this list of conditions and the following disclaimer. 
- *
- * 2. Redistributions in binary form must reproduce the above copyright
- *    notice, this list of conditions and the following disclaimer in
- *    the documentation and/or other materials provided with the
- *    distribution.
- *
- * 3. All advertising materials mentioning features or use of this
- *    software must display the following acknowledgment:
- *    "This product includes software developed by the OpenSSL Project
- *    for use in the OpenSSL Toolkit. (http://www.OpenSSL.org/)"
- *
- * 4. The names "OpenSSL Toolkit" and "OpenSSL Project" must not be used to
- *    endorse or promote products derived from this software without
- *    prior written permission. For written permission, please contact
- *    licensing@OpenSSL.org.
- *
- * 5. Products derived from this software may not be called "OpenSSL"
- *    nor may "OpenSSL" appear in their names without prior written
- *    permission of the OpenSSL Project.
- *
- * 6. Redistributions of any form whatsoever must retain the following
- *    acknowledgment:
- *    "This product includes software developed by the OpenSSL Project
- *    for use in the OpenSSL Toolkit (http://www.OpenSSL.org/)"
- *
- * THIS SOFTWARE IS PROVIDED BY THE OpenSSL PROJECT ``AS IS'' AND ANY
- * EXPRESSED OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
- * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR
- * PURPOSE ARE DISCLAIMED.  IN NO EVENT SHALL THE OpenSSL PROJECT OR
- * ITS CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
- * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
- * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
- * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
- * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
- * STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
- * ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED
- * OF THE POSSIBILITY OF SUCH DAMAGE.
- * ====================================================================
- *
- * This product includes cryptographic software written by Eric Young
- * (eay@cryptsoft.com).  This product includes software written by Tim
- * Hudson (tjh@cryptsoft.com).
- *
- */
-
-#include <stdio.h>
-#include <stdlib.h>
-#include "cryptlib.h"
-#include <openssl/x509.h>
-#include <openssl/rand.h>
-#ifndef OPENSSL_NO_RSA
-#include <openssl/rsa.h>
-#endif
-#ifndef OPENSSL_NO_DSA
-#include <openssl/dsa.h>
-#endif
-#include <openssl/bn.h>
-
-#ifndef OPENSSL_NO_DSA
-static int dsa_pkey2pkcs8(PKCS8_PRIV_KEY_INFO *p8inf, EVP_PKEY *pkey);
-#endif
-#ifndef OPENSSL_NO_EC
-static int eckey_pkey2pkcs8(PKCS8_PRIV_KEY_INFO *p8inf, EVP_PKEY *pkey);
-#endif
-
-/* Extract a private key from a PKCS8 structure */
-
-EVP_PKEY *EVP_PKCS82PKEY(PKCS8_PRIV_KEY_INFO *p8)
-{
-	EVP_PKEY *pkey = NULL;
-#ifndef OPENSSL_NO_RSA
-	RSA *rsa = NULL;
-#endif
-#ifndef OPENSSL_NO_DSA
-	DSA *dsa = NULL;
-	ASN1_TYPE *t1, *t2;
-	ASN1_INTEGER *privkey;
-	STACK_OF(ASN1_TYPE) *ndsa = NULL;
-#endif
-#ifndef OPENSSL_NO_EC
-	EC_KEY *eckey = NULL;
-	const unsigned char *p_tmp;
-#endif
-#if !defined(OPENSSL_NO_DSA) || !defined(OPENSSL_NO_EC)
-	ASN1_TYPE    *param = NULL;	
-	BN_CTX *ctx = NULL;
-	int plen;
-#endif
-	X509_ALGOR *a;
-	const unsigned char *p;
-	const unsigned char *cp;
-	int pkeylen;
-	int  nid;
-	char obj_tmp[80];
-
-	if(p8->pkey->type == V_ASN1_OCTET_STRING) {
-		p8->broken = PKCS8_OK;
-		p = p8->pkey->value.octet_string->data;
-		pkeylen = p8->pkey->value.octet_string->length;
-	} else {
-		p8->broken = PKCS8_NO_OCTET;
-		p = p8->pkey->value.sequence->data;
-		pkeylen = p8->pkey->value.sequence->length;
-	}
-	if (!(pkey = EVP_PKEY_new())) {
-		EVPerr(EVP_F_EVP_PKCS82PKEY,ERR_R_MALLOC_FAILURE);
-		return NULL;
-	}
-	a = p8->pkeyalg;
-	nid = OBJ_obj2nid(a->algorithm);
-	switch(nid)
-	{
-#ifndef OPENSSL_NO_RSA
-		case NID_rsaEncryption:
-		cp = p;
-		if (!(rsa = d2i_RSAPrivateKey (NULL,&cp, pkeylen))) {
-			EVPerr(EVP_F_EVP_PKCS82PKEY, EVP_R_DECODE_ERROR);
-			return NULL;
-		}
-		EVP_PKEY_assign_RSA (pkey, rsa);
-		break;
-#endif
-#ifndef OPENSSL_NO_DSA
-		case NID_dsa:
-		/* PKCS#8 DSA is weird: you just get a private key integer
-	         * and parameters in the AlgorithmIdentifier the pubkey must
-		 * be recalculated.
-		 */
-	
-		/* Check for broken DSA PKCS#8, UGH! */
-		if(*p == (V_ASN1_SEQUENCE|V_ASN1_CONSTRUCTED)) {
-		    if(!(ndsa = ASN1_seq_unpack_ASN1_TYPE(p, pkeylen, 
-							  d2i_ASN1_TYPE,
-							  ASN1_TYPE_free))) {
-			EVPerr(EVP_F_EVP_PKCS82PKEY, EVP_R_DECODE_ERROR);
-			goto dsaerr;
-		    }
-		    if(sk_ASN1_TYPE_num(ndsa) != 2 ) {
-			EVPerr(EVP_F_EVP_PKCS82PKEY, EVP_R_DECODE_ERROR);
-			goto dsaerr;
-		    }
-		    /* Handle Two broken types:
-		     * SEQUENCE {parameters, priv_key}
-		     * SEQUENCE {pub_key, priv_key}
-		     */
-
-		    t1 = sk_ASN1_TYPE_value(ndsa, 0);
-		    t2 = sk_ASN1_TYPE_value(ndsa, 1);
-		    if(t1->type == V_ASN1_SEQUENCE) {
-			p8->broken = PKCS8_EMBEDDED_PARAM;
-			param = t1;
-		    } else if(a->parameter->type == V_ASN1_SEQUENCE) {
-			p8->broken = PKCS8_NS_DB;
-			param = a->parameter;
-		    } else {
-			EVPerr(EVP_F_EVP_PKCS82PKEY, EVP_R_DECODE_ERROR);
-			goto dsaerr;
-		    }
-
-		    if(t2->type != V_ASN1_INTEGER) {
-			EVPerr(EVP_F_EVP_PKCS82PKEY, EVP_R_DECODE_ERROR);
-			goto dsaerr;
-		    }
-		    privkey = t2->value.integer;
-		} else {
-			if (!(privkey=d2i_ASN1_INTEGER (NULL, &p, pkeylen))) {
-				EVPerr(EVP_F_EVP_PKCS82PKEY, EVP_R_DECODE_ERROR);
-				goto dsaerr;
-			}
-			param = p8->pkeyalg->parameter;
-		}
-		if (!param || (param->type != V_ASN1_SEQUENCE)) {
-			EVPerr(EVP_F_EVP_PKCS82PKEY, EVP_R_DECODE_ERROR);
-			goto dsaerr;
-		}
-		cp = p = param->value.sequence->data;
-		plen = param->value.sequence->length;
-		if (!(dsa = d2i_DSAparams (NULL, &cp, plen))) {
-			EVPerr(EVP_F_EVP_PKCS82PKEY, EVP_R_DECODE_ERROR);
-			goto dsaerr;
-		}
-		/* We have parameters now set private key */
-		if (!(dsa->priv_key = ASN1_INTEGER_to_BN(privkey, NULL))) {
-			EVPerr(EVP_F_EVP_PKCS82PKEY,EVP_R_BN_DECODE_ERROR);
-			goto dsaerr;
-		}
-		/* Calculate public key (ouch!) */
-		if (!(dsa->pub_key = BN_new())) {
-			EVPerr(EVP_F_EVP_PKCS82PKEY,ERR_R_MALLOC_FAILURE);
-			goto dsaerr;
-		}
-		if (!(ctx = BN_CTX_new())) {
-			EVPerr(EVP_F_EVP_PKCS82PKEY,ERR_R_MALLOC_FAILURE);
-			goto dsaerr;
-		}
-			
-		if (!BN_mod_exp(dsa->pub_key, dsa->g,
-						 dsa->priv_key, dsa->p, ctx)) {
-			
-			EVPerr(EVP_F_EVP_PKCS82PKEY,EVP_R_BN_PUBKEY_ERROR);
-			goto dsaerr;
-		}
-
-		EVP_PKEY_assign_DSA(pkey, dsa);
-		BN_CTX_free (ctx);
-		if(ndsa) sk_ASN1_TYPE_pop_free(ndsa, ASN1_TYPE_free);
-		else ASN1_INTEGER_free(privkey);
-		break;
-		dsaerr:
-		BN_CTX_free (ctx);
-		sk_ASN1_TYPE_pop_free(ndsa, ASN1_TYPE_free);
-		DSA_free(dsa);
-		EVP_PKEY_free(pkey);
-		return NULL;
-		break;
-#endif
-#ifndef OPENSSL_NO_EC
-		case NID_X9_62_id_ecPublicKey:
-		p_tmp = p;
-		/* extract the ec parameters */
-		param = p8->pkeyalg->parameter;
-
-		if (!param || ((param->type != V_ASN1_SEQUENCE) &&
-		    (param->type != V_ASN1_OBJECT)))
-		{
-			EVPerr(EVP_F_EVP_PKCS82PKEY, EVP_R_DECODE_ERROR);
-			goto ecerr;
-		}
-
-		if (param->type == V_ASN1_SEQUENCE)
-		{
-			cp = p = param->value.sequence->data;
-			plen = param->value.sequence->length;
-
-			if (!(eckey = d2i_ECParameters(NULL, &cp, plen)))
-			{
-				EVPerr(EVP_F_EVP_PKCS82PKEY,
-					EVP_R_DECODE_ERROR);
-				goto ecerr;
-			}
-		}
-		else
-		{
-			EC_GROUP *group;
-			cp = p = param->value.object->data;
-			plen = param->value.object->length;
-
-			/* type == V_ASN1_OBJECT => the parameters are given
-			 * by an asn1 OID
-			 */
-			if ((eckey = EC_KEY_new()) == NULL)
-			{
-				EVPerr(EVP_F_EVP_PKCS82PKEY,
-					ERR_R_MALLOC_FAILURE);
-				goto ecerr;
-			}
-			group = EC_GROUP_new_by_curve_name(OBJ_obj2nid(a->parameter->value.object));
-			if (group == NULL)
-				goto ecerr;
-			EC_GROUP_set_asn1_flag(group, OPENSSL_EC_NAMED_CURVE);
-			if (EC_KEY_set_group(eckey, group) == 0)
-				goto ecerr;
-			EC_GROUP_free(group);
-		}
-
-		/* We have parameters now set private key */
-		if (!d2i_ECPrivateKey(&eckey, &p_tmp, pkeylen))
-		{
-			EVPerr(EVP_F_EVP_PKCS82PKEY, EVP_R_DECODE_ERROR);
-			goto ecerr;
-		}
-
-		/* calculate public key (if necessary) */
-		if (EC_KEY_get0_public_key(eckey) == NULL)
-		{
-			const BIGNUM *priv_key;
-			const EC_GROUP *group;
-			EC_POINT *pub_key;
-			/* the public key was not included in the SEC1 private
-			 * key => calculate the public key */
-			group   = EC_KEY_get0_group(eckey);
-			pub_key = EC_POINT_new(group);
-			if (pub_key == NULL)
-			{
-				EVPerr(EVP_F_EVP_PKCS82PKEY, ERR_R_EC_LIB);
-				goto ecerr;
-			}
-			if (!EC_POINT_copy(pub_key, EC_GROUP_get0_generator(group)))
-			{
-				EC_POINT_free(pub_key);
-				EVPerr(EVP_F_EVP_PKCS82PKEY, ERR_R_EC_LIB);
-				goto ecerr;
-			}
-			priv_key = EC_KEY_get0_private_key(eckey);
-			if (!EC_POINT_mul(group, pub_key, priv_key, NULL, NULL, ctx))
-			{
-				EC_POINT_free(pub_key);
-				EVPerr(EVP_F_EVP_PKCS82PKEY, ERR_R_EC_LIB);
-				goto ecerr;
-			}
-			if (EC_KEY_set_public_key(eckey, pub_key) == 0)
-			{
-				EC_POINT_free(pub_key);
-				EVPerr(EVP_F_EVP_PKCS82PKEY, ERR_R_EC_LIB);
-				goto ecerr;
-			}
-			EC_POINT_free(pub_key);
-		}
-
-		EVP_PKEY_assign_EC_KEY(pkey, eckey);
-		if (ctx)
-			BN_CTX_free(ctx);
-		break;
-ecerr:
-		if (ctx)
-			BN_CTX_free(ctx);
-		if (eckey)
-			EC_KEY_free(eckey);
-		if (pkey)
-			EVP_PKEY_free(pkey);
-		return NULL;
-#endif
-		default:
-		EVPerr(EVP_F_EVP_PKCS82PKEY, EVP_R_UNSUPPORTED_PRIVATE_KEY_ALGORITHM);
-		if (!a->algorithm) BUF_strlcpy (obj_tmp, "NULL", sizeof obj_tmp);
-		else i2t_ASN1_OBJECT(obj_tmp, 80, a->algorithm);
-		ERR_add_error_data(2, "TYPE=", obj_tmp);
-		EVP_PKEY_free (pkey);
-		return NULL;
-	}
-	return pkey;
-}
-
-PKCS8_PRIV_KEY_INFO *EVP_PKEY2PKCS8(EVP_PKEY *pkey)
-{
-	return EVP_PKEY2PKCS8_broken(pkey, PKCS8_OK);
-}
-
-/* Turn a private key into a PKCS8 structure */
-
-PKCS8_PRIV_KEY_INFO *EVP_PKEY2PKCS8_broken(EVP_PKEY *pkey, int broken)
-{
-	PKCS8_PRIV_KEY_INFO *p8;
-
-	if (!(p8 = PKCS8_PRIV_KEY_INFO_new())) {	
-		EVPerr(EVP_F_EVP_PKEY2PKCS8_BROKEN,ERR_R_MALLOC_FAILURE);
-		return NULL;
-	}
-	p8->broken = broken;
-	if (!ASN1_INTEGER_set(p8->version, 0)) {
-		EVPerr(EVP_F_EVP_PKEY2PKCS8_BROKEN,ERR_R_MALLOC_FAILURE);
-		PKCS8_PRIV_KEY_INFO_free (p8);
-		return NULL;
-	}
-	if (!(p8->pkeyalg->parameter = ASN1_TYPE_new ())) {
-		EVPerr(EVP_F_EVP_PKEY2PKCS8_BROKEN,ERR_R_MALLOC_FAILURE);
-		PKCS8_PRIV_KEY_INFO_free (p8);
-		return NULL;
-	}
-	p8->pkey->type = V_ASN1_OCTET_STRING;
-	switch (EVP_PKEY_type(pkey->type)) {
-#ifndef OPENSSL_NO_RSA
-		case EVP_PKEY_RSA:
-
-		if(p8->broken == PKCS8_NO_OCTET) p8->pkey->type = V_ASN1_SEQUENCE;
-
-		p8->pkeyalg->algorithm = OBJ_nid2obj(NID_rsaEncryption);
-		p8->pkeyalg->parameter->type = V_ASN1_NULL;
-		if (!ASN1_pack_string_of (EVP_PKEY,pkey, i2d_PrivateKey,
-					 &p8->pkey->value.octet_string)) {
-			EVPerr(EVP_F_EVP_PKEY2PKCS8_BROKEN,ERR_R_MALLOC_FAILURE);
-			PKCS8_PRIV_KEY_INFO_free (p8);
-			return NULL;
-		}
-		break;
-#endif
-#ifndef OPENSSL_NO_DSA
-		case EVP_PKEY_DSA:
-		if(!dsa_pkey2pkcs8(p8, pkey)) {
-			PKCS8_PRIV_KEY_INFO_free (p8);
-			return NULL;
-		}
-
-		break;
-#endif
-#ifndef OPENSSL_NO_EC
-		case EVP_PKEY_EC:
-		if (!eckey_pkey2pkcs8(p8, pkey))
-		{
-			PKCS8_PRIV_KEY_INFO_free(p8);
-			return(NULL);
-		}
-		break;
-#endif
-		default:
-		EVPerr(EVP_F_EVP_PKEY2PKCS8_BROKEN, EVP_R_UNSUPPORTED_PRIVATE_KEY_ALGORITHM);
-		PKCS8_PRIV_KEY_INFO_free (p8);
-		return NULL;
-	}
-	RAND_add(p8->pkey->value.octet_string->data,
-		 p8->pkey->value.octet_string->length, 0.0);
-	return p8;
-}
-
-PKCS8_PRIV_KEY_INFO *PKCS8_set_broken(PKCS8_PRIV_KEY_INFO *p8, int broken)
-{
-	switch (broken) {
-
-		case PKCS8_OK:
-		p8->broken = PKCS8_OK;
-		return p8;
-		break;
-
-		case PKCS8_NO_OCTET:
-		p8->broken = PKCS8_NO_OCTET;
-		p8->pkey->type = V_ASN1_SEQUENCE;
-		return p8;
-		break;
-
-		default:
-		EVPerr(EVP_F_PKCS8_SET_BROKEN,EVP_R_PKCS8_UNKNOWN_BROKEN_TYPE);
-		return NULL;
-	}
-}
-
-#ifndef OPENSSL_NO_DSA
-static int dsa_pkey2pkcs8(PKCS8_PRIV_KEY_INFO *p8, EVP_PKEY *pkey)
-{
-	ASN1_STRING *params = NULL;
-	ASN1_INTEGER *prkey = NULL;
-	ASN1_TYPE *ttmp = NULL;
-	STACK_OF(ASN1_TYPE) *ndsa = NULL;
-	unsigned char *p = NULL, *q;
-	int len;
-
-	p8->pkeyalg->algorithm = OBJ_nid2obj(NID_dsa);
-	len = i2d_DSAparams (pkey->pkey.dsa, NULL);
-	if (!(p = OPENSSL_malloc(len))) {
-		EVPerr(EVP_F_DSA_PKEY2PKCS8,ERR_R_MALLOC_FAILURE);
-		goto err;
-	}
-	q = p;
-	i2d_DSAparams (pkey->pkey.dsa, &q);
-	if (!(params = ASN1_STRING_new())) {
-		EVPerr(EVP_F_DSA_PKEY2PKCS8,ERR_R_MALLOC_FAILURE);
-		goto err;
-	}
-	if (!ASN1_STRING_set(params, p, len)) {
-		EVPerr(EVP_F_DSA_PKEY2PKCS8,ERR_R_MALLOC_FAILURE);
-		goto err;
-	}
-	OPENSSL_free(p);
-	p = NULL;
-	/* Get private key into integer */
-	if (!(prkey = BN_to_ASN1_INTEGER (pkey->pkey.dsa->priv_key, NULL))) {
-		EVPerr(EVP_F_DSA_PKEY2PKCS8,EVP_R_ENCODE_ERROR);
-		goto err;
-	}
-
-	switch(p8->broken) {
-
-		case PKCS8_OK:
-		case PKCS8_NO_OCTET:
-
-		if (!ASN1_pack_string_of(ASN1_INTEGER,prkey, i2d_ASN1_INTEGER,
-					 &p8->pkey->value.octet_string)) {
-			EVPerr(EVP_F_DSA_PKEY2PKCS8,ERR_R_MALLOC_FAILURE);
-			goto err;
-		}
-
-		M_ASN1_INTEGER_free (prkey);
-		prkey = NULL;
-		p8->pkeyalg->parameter->value.sequence = params;
-		params = NULL;
-		p8->pkeyalg->parameter->type = V_ASN1_SEQUENCE;
-
-		break;
-
-		case PKCS8_NS_DB:
-
-		p8->pkeyalg->parameter->value.sequence = params;
-		params = NULL;
-		p8->pkeyalg->parameter->type = V_ASN1_SEQUENCE;
-		if (!(ndsa = sk_ASN1_TYPE_new_null())) {
-			EVPerr(EVP_F_DSA_PKEY2PKCS8,ERR_R_MALLOC_FAILURE);
-			goto err;
-		}
-		if (!(ttmp = ASN1_TYPE_new())) {
-			EVPerr(EVP_F_DSA_PKEY2PKCS8,ERR_R_MALLOC_FAILURE);
-			goto err;
-		}
-		if (!(ttmp->value.integer =
-			BN_to_ASN1_INTEGER(pkey->pkey.dsa->pub_key, NULL))) {
-			EVPerr(EVP_F_DSA_PKEY2PKCS8,EVP_R_ENCODE_ERROR);
-			goto err;
-		}
-		ttmp->type = V_ASN1_INTEGER;
-		if (!sk_ASN1_TYPE_push(ndsa, ttmp)) {
-			EVPerr(EVP_F_DSA_PKEY2PKCS8,ERR_R_MALLOC_FAILURE);
-			goto err;
-		}
-
-		if (!(ttmp = ASN1_TYPE_new())) {
-			EVPerr(EVP_F_DSA_PKEY2PKCS8,ERR_R_MALLOC_FAILURE);
-			goto err;
-		}
-		ttmp->value.integer = prkey;
-		prkey = NULL;
-		ttmp->type = V_ASN1_INTEGER;
-		if (!sk_ASN1_TYPE_push(ndsa, ttmp)) {
-			EVPerr(EVP_F_DSA_PKEY2PKCS8,ERR_R_MALLOC_FAILURE);
-			goto err;
-		}
-		ttmp = NULL;
-
-		if (!(p8->pkey->value.octet_string = ASN1_OCTET_STRING_new())) {
-			EVPerr(EVP_F_DSA_PKEY2PKCS8,ERR_R_MALLOC_FAILURE);
-			goto err;
-		}
-
-		if (!ASN1_seq_pack_ASN1_TYPE(ndsa, i2d_ASN1_TYPE,
-					 &p8->pkey->value.octet_string->data,
-					 &p8->pkey->value.octet_string->length)) {
-
-			EVPerr(EVP_F_DSA_PKEY2PKCS8,ERR_R_MALLOC_FAILURE);
-			goto err;
-		}
-		sk_ASN1_TYPE_pop_free(ndsa, ASN1_TYPE_free);
-		break;
-
-		case PKCS8_EMBEDDED_PARAM:
-
-		p8->pkeyalg->parameter->type = V_ASN1_NULL;
-		if (!(ndsa = sk_ASN1_TYPE_new_null())) {
-			EVPerr(EVP_F_DSA_PKEY2PKCS8,ERR_R_MALLOC_FAILURE);
-			goto err;
-		}
-		if (!(ttmp = ASN1_TYPE_new())) {
-			EVPerr(EVP_F_DSA_PKEY2PKCS8,ERR_R_MALLOC_FAILURE);
-			goto err;
-		}
-		ttmp->value.sequence = params;
-		params = NULL;
-		ttmp->type = V_ASN1_SEQUENCE;
-		if (!sk_ASN1_TYPE_push(ndsa, ttmp)) {
-			EVPerr(EVP_F_DSA_PKEY2PKCS8,ERR_R_MALLOC_FAILURE);
-			goto err;
-		}
-
-		if (!(ttmp = ASN1_TYPE_new())) {
-			EVPerr(EVP_F_DSA_PKEY2PKCS8,ERR_R_MALLOC_FAILURE);
-			goto err;
-		}
-		ttmp->value.integer = prkey;
-		prkey = NULL;
-		ttmp->type = V_ASN1_INTEGER;
-		if (!sk_ASN1_TYPE_push(ndsa, ttmp)) {
-			EVPerr(EVP_F_DSA_PKEY2PKCS8,ERR_R_MALLOC_FAILURE);
-			goto err;
-		}
-		ttmp = NULL;
-
-		if (!(p8->pkey->value.octet_string = ASN1_OCTET_STRING_new())) {
-			EVPerr(EVP_F_DSA_PKEY2PKCS8,ERR_R_MALLOC_FAILURE);
-			goto err;
-		}
-
-		if (!ASN1_seq_pack_ASN1_TYPE(ndsa, i2d_ASN1_TYPE,
-					 &p8->pkey->value.octet_string->data,
-					 &p8->pkey->value.octet_string->length)) {
-
-			EVPerr(EVP_F_DSA_PKEY2PKCS8,ERR_R_MALLOC_FAILURE);
-			goto err;
-		}
-		sk_ASN1_TYPE_pop_free(ndsa, ASN1_TYPE_free);
-		break;
-	}
-	return 1;
-err:
-	if (p != NULL) OPENSSL_free(p);
-	if (params != NULL) ASN1_STRING_free(params);
-	if (prkey != NULL) M_ASN1_INTEGER_free(prkey);
-	if (ttmp != NULL) ASN1_TYPE_free(ttmp);
-	if (ndsa != NULL) sk_ASN1_TYPE_pop_free(ndsa, ASN1_TYPE_free);
-	return 0;
-}
-#endif
-
-#ifndef OPENSSL_NO_EC
-static int eckey_pkey2pkcs8(PKCS8_PRIV_KEY_INFO *p8, EVP_PKEY *pkey)
-{
-	EC_KEY		*ec_key;
-	const EC_GROUP  *group;
-	unsigned char	*p, *pp;
-	int 		nid, i, ret = 0;
-	unsigned int    tmp_flags, old_flags;
-
-	ec_key = pkey->pkey.ec;
-	if (ec_key == NULL || (group = EC_KEY_get0_group(ec_key)) == NULL) 
-	{
-		EVPerr(EVP_F_ECKEY_PKEY2PKCS8, EVP_R_MISSING_PARAMETERS);
-		return 0;
-	}
-
-	/* set the ec parameters OID */
-	if (p8->pkeyalg->algorithm)
-		ASN1_OBJECT_free(p8->pkeyalg->algorithm);
-
-	p8->pkeyalg->algorithm = OBJ_nid2obj(NID_X9_62_id_ecPublicKey);
-
-	/* set the ec parameters */
-
-	if (p8->pkeyalg->parameter)
-	{
-		ASN1_TYPE_free(p8->pkeyalg->parameter);
-		p8->pkeyalg->parameter = NULL;
-	}
-
-	if ((p8->pkeyalg->parameter = ASN1_TYPE_new()) == NULL)
-	{
-		EVPerr(EVP_F_ECKEY_PKEY2PKCS8, ERR_R_MALLOC_FAILURE);
-		return 0;
-	}
-	
-	if (EC_GROUP_get_asn1_flag(group)
-                     && (nid = EC_GROUP_get_curve_name(group)))
-	{
-		/* we have a 'named curve' => just set the OID */
-		p8->pkeyalg->parameter->type = V_ASN1_OBJECT;
-		p8->pkeyalg->parameter->value.object = OBJ_nid2obj(nid);
-	}
-	else	/* explicit parameters */
-	{
-		if ((i = i2d_ECParameters(ec_key, NULL)) == 0)
-		{
-			EVPerr(EVP_F_ECKEY_PKEY2PKCS8, ERR_R_EC_LIB);
-			return 0;
-		}
-		if ((p = (unsigned char *) OPENSSL_malloc(i)) == NULL)
-		{
-			EVPerr(EVP_F_ECKEY_PKEY2PKCS8, ERR_R_MALLOC_FAILURE);
-			return 0;
-		}	
-		pp = p;
-		if (!i2d_ECParameters(ec_key, &pp))
-		{
-			EVPerr(EVP_F_ECKEY_PKEY2PKCS8, ERR_R_EC_LIB);
-			OPENSSL_free(p);
-			return 0;
-		}
-		p8->pkeyalg->parameter->type = V_ASN1_SEQUENCE;
-		if ((p8->pkeyalg->parameter->value.sequence 
-			= ASN1_STRING_new()) == NULL)
-		{
-			EVPerr(EVP_F_ECKEY_PKEY2PKCS8, ERR_R_ASN1_LIB);
-			OPENSSL_free(p);
-			return 0;
-		}
-		ASN1_STRING_set(p8->pkeyalg->parameter->value.sequence, p, i);
-		OPENSSL_free(p);
-	}
-
-	/* set the private key */
-
-	/* do not include the parameters in the SEC1 private key
-	 * see PKCS#11 12.11 */
-	old_flags = EC_KEY_get_enc_flags(pkey->pkey.ec);
-	tmp_flags = old_flags | EC_PKEY_NO_PARAMETERS;
-	EC_KEY_set_enc_flags(pkey->pkey.ec, tmp_flags);
-	i = i2d_ECPrivateKey(pkey->pkey.ec, NULL);
-	if (!i)
-	{
-		EC_KEY_set_enc_flags(pkey->pkey.ec, old_flags);
-		EVPerr(EVP_F_ECKEY_PKEY2PKCS8, ERR_R_EC_LIB);
-		return 0;
-	}
-	p = (unsigned char *) OPENSSL_malloc(i);
-	if (!p)
-	{
-		EC_KEY_set_enc_flags(pkey->pkey.ec, old_flags);
-		EVPerr(EVP_F_ECKEY_PKEY2PKCS8, ERR_R_MALLOC_FAILURE);
-		return 0;
-	}
-	pp = p;
-	if (!i2d_ECPrivateKey(pkey->pkey.ec, &pp))
-	{
-		EC_KEY_set_enc_flags(pkey->pkey.ec, old_flags);
-		EVPerr(EVP_F_ECKEY_PKEY2PKCS8, ERR_R_EC_LIB);
-		OPENSSL_free(p);
-		return 0;
-	}
-	/* restore old encoding flags */
-	EC_KEY_set_enc_flags(pkey->pkey.ec, old_flags);
-
-	switch(p8->broken) {
-
-		case PKCS8_OK:
-		p8->pkey->value.octet_string = ASN1_OCTET_STRING_new();
-		if (!p8->pkey->value.octet_string ||
-		    !M_ASN1_OCTET_STRING_set(p8->pkey->value.octet_string,
-		    (const void *)p, i))
-
-		{
-			EVPerr(EVP_F_ECKEY_PKEY2PKCS8, ERR_R_MALLOC_FAILURE);
-		}
-		else
-			ret = 1;
-		break;
-		case PKCS8_NO_OCTET:		/* RSA specific */
-		case PKCS8_NS_DB:		/* DSA specific */
-		case PKCS8_EMBEDDED_PARAM:	/* DSA specific */
-		default:
-			EVPerr(EVP_F_ECKEY_PKEY2PKCS8,EVP_R_ENCODE_ERROR);
-	}
-	OPENSSL_cleanse(p, (size_t)i);
-	OPENSSL_free(p);
-	return ret;
-}
-#endif
-
-/* EVP_PKEY attribute functions */
-
-int EVP_PKEY_get_attr_count(const EVP_PKEY *key)
-{
-	return X509at_get_attr_count(key->attributes);
-}
-
-int EVP_PKEY_get_attr_by_NID(const EVP_PKEY *key, int nid,
-			  int lastpos)
-{
-	return X509at_get_attr_by_NID(key->attributes, nid, lastpos);
-}
-
-int EVP_PKEY_get_attr_by_OBJ(const EVP_PKEY *key, ASN1_OBJECT *obj,
-			  int lastpos)
-{
-	return X509at_get_attr_by_OBJ(key->attributes, obj, lastpos);
-}
-
-X509_ATTRIBUTE *EVP_PKEY_get_attr(const EVP_PKEY *key, int loc)
-{
-	return X509at_get_attr(key->attributes, loc);
-}
-
-X509_ATTRIBUTE *EVP_PKEY_delete_attr(EVP_PKEY *key, int loc)
-{
-	return X509at_delete_attr(key->attributes, loc);
-}
-
-int EVP_PKEY_add1_attr(EVP_PKEY *key, X509_ATTRIBUTE *attr)
-{
-	if(X509at_add1_attr(&key->attributes, attr)) return 1;
-	return 0;
-}
-
-int EVP_PKEY_add1_attr_by_OBJ(EVP_PKEY *key,
-			const ASN1_OBJECT *obj, int type,
-			const unsigned char *bytes, int len)
-{
-	if(X509at_add1_attr_by_OBJ(&key->attributes, obj,
-				type, bytes, len)) return 1;
-	return 0;
-}
-
-int EVP_PKEY_add1_attr_by_NID(EVP_PKEY *key,
-			int nid, int type,
-			const unsigned char *bytes, int len)
-{
-	if(X509at_add1_attr_by_NID(&key->attributes, nid,
-				type, bytes, len)) return 1;
-	return 0;
-}
-
-int EVP_PKEY_add1_attr_by_txt(EVP_PKEY *key,
-			const char *attrname, int type,
-			const unsigned char *bytes, int len)
-{
-	if(X509at_add1_attr_by_txt(&key->attributes, attrname,
-				type, bytes, len)) return 1;
-	return 0;
-}
diff --git a/crypto/openssl/crypto/evp/evp_test.c b/crypto/openssl/crypto/evp/evp_test.c
deleted file mode 100644
index 6ecbecce7594..000000000000
--- a/crypto/openssl/crypto/evp/evp_test.c
+++ /dev/null
@@ -1,442 +0,0 @@
-/* Written by Ben Laurie, 2001 */
-/*
- * Copyright (c) 2001 The OpenSSL Project.  All rights reserved.
- *
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions
- * are met:
- *
- * 1. Redistributions of source code must retain the above copyright
- *    notice, this list of conditions and the following disclaimer. 
- *
- * 2. Redistributions in binary form must reproduce the above copyright
- *    notice, this list of conditions and the following disclaimer in
- *    the documentation and/or other materials provided with the
- *    distribution.
- *
- * 3. All advertising materials mentioning features or use of this
- *    software must display the following acknowledgment:
- *    "This product includes software developed by the OpenSSL Project
- *    for use in the OpenSSL Toolkit. (http://www.openssl.org/)"
- *
- * 4. The names "OpenSSL Toolkit" and "OpenSSL Project" must not be used to
- *    endorse or promote products derived from this software without
- *    prior written permission. For written permission, please contact
- *    openssl-core@openssl.org.
- *
- * 5. Products derived from this software may not be called "OpenSSL"
- *    nor may "OpenSSL" appear in their names without prior written
- *    permission of the OpenSSL Project.
- *
- * 6. Redistributions of any form whatsoever must retain the following
- *    acknowledgment:
- *    "This product includes software developed by the OpenSSL Project
- *    for use in the OpenSSL Toolkit (http://www.openssl.org/)"
- *
- * THIS SOFTWARE IS PROVIDED BY THE OpenSSL PROJECT ``AS IS'' AND ANY
- * EXPRESSED OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
- * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR
- * PURPOSE ARE DISCLAIMED.  IN NO EVENT SHALL THE OpenSSL PROJECT OR
- * ITS CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
- * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
- * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
- * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
- * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
- * STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
- * ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED
- * OF THE POSSIBILITY OF SUCH DAMAGE.
- */
-
-#include <stdio.h>
-#include <string.h>
-
-#include "../e_os.h"
-
-#include <openssl/opensslconf.h>
-#include <openssl/evp.h>
-#ifndef OPENSSL_NO_ENGINE
-#include <openssl/engine.h>
-#endif
-#include <openssl/err.h>
-#include <openssl/conf.h>
-
-static void hexdump(FILE *f,const char *title,const unsigned char *s,int l)
-    {
-    int n=0;
-
-    fprintf(f,"%s",title);
-    for( ; n < l ; ++n)
-	{
-	if((n%16) == 0)
-	    fprintf(f,"\n%04x",n);
-	fprintf(f," %02x",s[n]);
-	}
-    fprintf(f,"\n");
-    }
-
-static int convert(unsigned char *s)
-    {
-    unsigned char *d;
-
-    for(d=s ; *s ; s+=2,++d)
-	{
-	unsigned int n;
-
-	if(!s[1])
-	    {
-	    fprintf(stderr,"Odd number of hex digits!");
-	    EXIT(4);
-	    }
-	sscanf((char *)s,"%2x",&n);
-	*d=(unsigned char)n;
-	}
-    return s-d;
-    }
-
-static char *sstrsep(char **string, const char *delim)
-    {
-    char isdelim[256];
-    char *token = *string;
-
-    if (**string == 0)
-        return NULL;
-
-    memset(isdelim, 0, 256);
-    isdelim[0] = 1;
-
-    while (*delim)
-        {
-        isdelim[(unsigned char)(*delim)] = 1;
-        delim++;
-        }
-
-    while (!isdelim[(unsigned char)(**string)])
-        {
-        (*string)++;
-        }
-
-    if (**string)
-        {
-        **string = 0;
-        (*string)++;
-        }
-
-    return token;
-    }
-
-static unsigned char *ustrsep(char **p,const char *sep)
-    { return (unsigned char *)sstrsep(p,sep); }
-
-static int test1_exit(int ec)
-	{
-	EXIT(ec);
-	return(0);		/* To keep some compilers quiet */
-	}
-
-static void test1(const EVP_CIPHER *c,const unsigned char *key,int kn,
-		  const unsigned char *iv,int in,
-		  const unsigned char *plaintext,int pn,
-		  const unsigned char *ciphertext,int cn,
-		  int encdec)
-    {
-    EVP_CIPHER_CTX ctx;
-    unsigned char out[4096];
-    int outl,outl2;
-
-    printf("Testing cipher %s%s\n",EVP_CIPHER_name(c),
-	   (encdec == 1 ? "(encrypt)" : (encdec == 0 ? "(decrypt)" : "(encrypt/decrypt)")));
-    hexdump(stdout,"Key",key,kn);
-    if(in)
-	hexdump(stdout,"IV",iv,in);
-    hexdump(stdout,"Plaintext",plaintext,pn);
-    hexdump(stdout,"Ciphertext",ciphertext,cn);
-    
-    if(kn != c->key_len)
-	{
-	fprintf(stderr,"Key length doesn't match, got %d expected %d\n",kn,
-		c->key_len);
-	test1_exit(5);
-	}
-    EVP_CIPHER_CTX_init(&ctx);
-    if (encdec != 0)
-        {
-	if(!EVP_EncryptInit_ex(&ctx,c,NULL,key,iv))
-	    {
-	    fprintf(stderr,"EncryptInit failed\n");
-	    ERR_print_errors_fp(stderr);
-	    test1_exit(10);
-	    }
-	EVP_CIPHER_CTX_set_padding(&ctx,0);
-
-	if(!EVP_EncryptUpdate(&ctx,out,&outl,plaintext,pn))
-	    {
-	    fprintf(stderr,"Encrypt failed\n");
-	    ERR_print_errors_fp(stderr);
-	    test1_exit(6);
-	    }
-	if(!EVP_EncryptFinal_ex(&ctx,out+outl,&outl2))
-	    {
-	    fprintf(stderr,"EncryptFinal failed\n");
-	    ERR_print_errors_fp(stderr);
-	    test1_exit(7);
-	    }
-
-	if(outl+outl2 != cn)
-	    {
-	    fprintf(stderr,"Ciphertext length mismatch got %d expected %d\n",
-		    outl+outl2,cn);
-	    test1_exit(8);
-	    }
-
-	if(memcmp(out,ciphertext,cn))
-	    {
-	    fprintf(stderr,"Ciphertext mismatch\n");
-	    hexdump(stderr,"Got",out,cn);
-	    hexdump(stderr,"Expected",ciphertext,cn);
-	    test1_exit(9);
-	    }
-	}
-
-    if (encdec <= 0)
-        {
-	if(!EVP_DecryptInit_ex(&ctx,c,NULL,key,iv))
-	    {
-	    fprintf(stderr,"DecryptInit failed\n");
-	    ERR_print_errors_fp(stderr);
-	    test1_exit(11);
-	    }
-	EVP_CIPHER_CTX_set_padding(&ctx,0);
-
-	if(!EVP_DecryptUpdate(&ctx,out,&outl,ciphertext,cn))
-	    {
-	    fprintf(stderr,"Decrypt failed\n");
-	    ERR_print_errors_fp(stderr);
-	    test1_exit(6);
-	    }
-	if(!EVP_DecryptFinal_ex(&ctx,out+outl,&outl2))
-	    {
-	    fprintf(stderr,"DecryptFinal failed\n");
-	    ERR_print_errors_fp(stderr);
-	    test1_exit(7);
-	    }
-
-	if(outl+outl2 != cn)
-	    {
-	    fprintf(stderr,"Plaintext length mismatch got %d expected %d\n",
-		    outl+outl2,cn);
-	    test1_exit(8);
-	    }
-
-	if(memcmp(out,plaintext,cn))
-	    {
-	    fprintf(stderr,"Plaintext mismatch\n");
-	    hexdump(stderr,"Got",out,cn);
-	    hexdump(stderr,"Expected",plaintext,cn);
-	    test1_exit(9);
-	    }
-	}
-
-    EVP_CIPHER_CTX_cleanup(&ctx);
-
-    printf("\n");
-    }
-
-static int test_cipher(const char *cipher,const unsigned char *key,int kn,
-		       const unsigned char *iv,int in,
-		       const unsigned char *plaintext,int pn,
-		       const unsigned char *ciphertext,int cn,
-		       int encdec)
-    {
-    const EVP_CIPHER *c;
-
-    c=EVP_get_cipherbyname(cipher);
-    if(!c)
-	return 0;
-
-    test1(c,key,kn,iv,in,plaintext,pn,ciphertext,cn,encdec);
-
-    return 1;
-    }
-
-static int test_digest(const char *digest,
-		       const unsigned char *plaintext,int pn,
-		       const unsigned char *ciphertext, unsigned int cn)
-    {
-    const EVP_MD *d;
-    EVP_MD_CTX ctx;
-    unsigned char md[EVP_MAX_MD_SIZE];
-    unsigned int mdn;
-
-    d=EVP_get_digestbyname(digest);
-    if(!d)
-	return 0;
-
-    printf("Testing digest %s\n",EVP_MD_name(d));
-    hexdump(stdout,"Plaintext",plaintext,pn);
-    hexdump(stdout,"Digest",ciphertext,cn);
-
-    EVP_MD_CTX_init(&ctx);
-    if(!EVP_DigestInit_ex(&ctx,d, NULL))
-	{
-	fprintf(stderr,"DigestInit failed\n");
-	ERR_print_errors_fp(stderr);
-	EXIT(100);
-	}
-    if(!EVP_DigestUpdate(&ctx,plaintext,pn))
-	{
-	fprintf(stderr,"DigestUpdate failed\n");
-	ERR_print_errors_fp(stderr);
-	EXIT(101);
-	}
-    if(!EVP_DigestFinal_ex(&ctx,md,&mdn))
-	{
-	fprintf(stderr,"DigestFinal failed\n");
-	ERR_print_errors_fp(stderr);
-	EXIT(101);
-	}
-    EVP_MD_CTX_cleanup(&ctx);
-
-    if(mdn != cn)
-	{
-	fprintf(stderr,"Digest length mismatch, got %d expected %d\n",mdn,cn);
-	EXIT(102);
-	}
-
-    if(memcmp(md,ciphertext,cn))
-	{
-	fprintf(stderr,"Digest mismatch\n");
-	hexdump(stderr,"Got",md,cn);
-	hexdump(stderr,"Expected",ciphertext,cn);
-	EXIT(103);
-	}
-
-    printf("\n");
-
-    EVP_MD_CTX_cleanup(&ctx);
-
-    return 1;
-    }
-
-int main(int argc,char **argv)
-    {
-    const char *szTestFile;
-    FILE *f;
-
-    if(argc != 2)
-	{
-	fprintf(stderr,"%s <test file>\n",argv[0]);
-	EXIT(1);
-	}
-    CRYPTO_malloc_debug_init();
-    CRYPTO_set_mem_debug_options(V_CRYPTO_MDEBUG_ALL);
-    CRYPTO_mem_ctrl(CRYPTO_MEM_CHECK_ON);
-
-    szTestFile=argv[1];
-
-    f=fopen(szTestFile,"r");
-    if(!f)
-	{
-	perror(szTestFile);
-	EXIT(2);
-	}
-
-    /* Load up the software EVP_CIPHER and EVP_MD definitions */
-    OpenSSL_add_all_ciphers();
-    OpenSSL_add_all_digests();
-#ifndef OPENSSL_NO_ENGINE
-    /* Load all compiled-in ENGINEs */
-    ENGINE_load_builtin_engines();
-#endif
-#if 0
-    OPENSSL_config();
-#endif
-#ifndef OPENSSL_NO_ENGINE
-    /* Register all available ENGINE implementations of ciphers and digests.
-     * This could perhaps be changed to "ENGINE_register_all_complete()"? */
-    ENGINE_register_all_ciphers();
-    ENGINE_register_all_digests();
-    /* If we add command-line options, this statement should be switchable.
-     * It'll prevent ENGINEs being ENGINE_init()ialised for cipher/digest use if
-     * they weren't already initialised. */
-    /* ENGINE_set_cipher_flags(ENGINE_CIPHER_FLAG_NOINIT); */
-#endif
-
-    for( ; ; )
-	{
-	char line[4096];
-	char *p;
-	char *cipher;
-	unsigned char *iv,*key,*plaintext,*ciphertext;
-	int encdec;
-	int kn,in,pn,cn;
-
-	if(!fgets((char *)line,sizeof line,f))
-	    break;
-	if(line[0] == '#' || line[0] == '\n')
-	    continue;
-	p=line;
-	cipher=sstrsep(&p,":");	
-	key=ustrsep(&p,":");
-	iv=ustrsep(&p,":");
-	plaintext=ustrsep(&p,":");
-	ciphertext=ustrsep(&p,":");
-	if (p[-1] == '\n') {
-	    p[-1] = '\0';
-	    encdec = -1;
-	} else {
-	    encdec = atoi(sstrsep(&p,"\n"));
-	}
-	      
-
-	kn=convert(key);
-	in=convert(iv);
-	pn=convert(plaintext);
-	cn=convert(ciphertext);
-
-	if(!test_cipher(cipher,key,kn,iv,in,plaintext,pn,ciphertext,cn,encdec)
-	   && !test_digest(cipher,plaintext,pn,ciphertext,cn))
-	    {
-#ifdef OPENSSL_NO_AES
-	    if (strstr(cipher, "AES") == cipher)
-		{
-		fprintf(stdout, "Cipher disabled, skipping %s\n", cipher); 
-		continue;
-		}
-#endif
-#ifdef OPENSSL_NO_DES
-	    if (strstr(cipher, "DES") == cipher)
-		{
-		fprintf(stdout, "Cipher disabled, skipping %s\n", cipher); 
-		continue;
-		}
-#endif
-#ifdef OPENSSL_NO_RC4
-	    if (strstr(cipher, "RC4") == cipher)
-		{
-		fprintf(stdout, "Cipher disabled, skipping %s\n", cipher); 
-		continue;
-		}
-#endif
-#ifdef OPENSSL_NO_CAMELLIA
-	    if (strstr(cipher, "CAMELLIA") == cipher)
-		{
-		fprintf(stdout, "Cipher disabled, skipping %s\n", cipher); 
-		continue;
-		}
-#endif
-	    fprintf(stderr,"Can't find %s\n",cipher);
-	    EXIT(3);
-	    }
-	}
-
-#ifndef OPENSSL_NO_ENGINE
-    ENGINE_cleanup();
-#endif
-    EVP_cleanup();
-    CRYPTO_cleanup_all_ex_data();
-    ERR_remove_state(0);
-    ERR_free_strings();
-    CRYPTO_mem_leaks_fp(stderr);
-
-    return 0;
-    }
diff --git a/crypto/openssl/crypto/evp/evptests.txt b/crypto/openssl/crypto/evp/evptests.txt
deleted file mode 100644
index 193009f781d8..000000000000
--- a/crypto/openssl/crypto/evp/evptests.txt
+++ /dev/null
@@ -1,312 +0,0 @@
-#cipher:key:iv:plaintext:ciphertext:0/1(decrypt/encrypt)
-#digest:::input:output
-
-# SHA(1) tests (from shatest.c)
-SHA1:::616263:a9993e364706816aba3e25717850c26c9cd0d89d
-
-# MD5 tests (from md5test.c)
-MD5::::d41d8cd98f00b204e9800998ecf8427e
-MD5:::61:0cc175b9c0f1b6a831c399e269772661
-MD5:::616263:900150983cd24fb0d6963f7d28e17f72
-MD5:::6d65737361676520646967657374:f96b697d7cb7938d525a2f31aaf161d0
-MD5:::6162636465666768696a6b6c6d6e6f707172737475767778797a:c3fcd3d76192e4007dfb496cca67e13b
-MD5:::4142434445464748494a4b4c4d4e4f505152535455565758595a6162636465666768696a6b6c6d6e6f707172737475767778797a30313233343536373839:d174ab98d277d9f5a5611c2c9f419d9f
-MD5:::3132333435363738393031323334353637383930313233343536373839303132333435363738393031323334353637383930313233343536373839303132333435363738393031323334353637383930:57edf4a22be3c955ac49da2e2107b67a
-
-# AES 128 ECB tests (from FIPS-197 test vectors, encrypt)
-
-AES-128-ECB:000102030405060708090A0B0C0D0E0F::00112233445566778899AABBCCDDEEFF:69C4E0D86A7B0430D8CDB78070B4C55A:1
-
-# AES 192 ECB tests (from FIPS-197 test vectors, encrypt)
-
-AES-192-ECB:000102030405060708090A0B0C0D0E0F1011121314151617::00112233445566778899AABBCCDDEEFF:DDA97CA4864CDFE06EAF70A0EC0D7191:1
-
-# AES 256 ECB tests (from FIPS-197 test vectors, encrypt)
-
-AES-256-ECB:000102030405060708090A0B0C0D0E0F101112131415161718191A1B1C1D1E1F::00112233445566778899AABBCCDDEEFF:8EA2B7CA516745BFEAFC49904B496089:1
-
-# AES 128 ECB tests (from NIST test vectors, encrypt)
-
-#AES-128-ECB:00000000000000000000000000000000::00000000000000000000000000000000:C34C052CC0DA8D73451AFE5F03BE297F:1
-
-# AES 128 ECB tests (from NIST test vectors, decrypt)
-
-#AES-128-ECB:00000000000000000000000000000000::44416AC2D1F53C583303917E6BE9EBE0:00000000000000000000000000000000:0
-
-# AES 192 ECB tests (from NIST test vectors, decrypt)
-
-#AES-192-ECB:000000000000000000000000000000000000000000000000::48E31E9E256718F29229319C19F15BA4:00000000000000000000000000000000:0
-
-# AES 256 ECB tests (from NIST test vectors, decrypt)
-
-#AES-256-ECB:0000000000000000000000000000000000000000000000000000000000000000::058CCFFDBBCB382D1F6F56585D8A4ADE:00000000000000000000000000000000:0
-
-# AES 128 CBC tests (from NIST test vectors, encrypt)
-
-#AES-128-CBC:00000000000000000000000000000000:00000000000000000000000000000000:00000000000000000000000000000000:8A05FC5E095AF4848A08D328D3688E3D:1
-
-# AES 192 CBC tests (from NIST test vectors, encrypt)
-
-#AES-192-CBC:000000000000000000000000000000000000000000000000:00000000000000000000000000000000:00000000000000000000000000000000:7BD966D53AD8C1BB85D2ADFAE87BB104:1
-
-# AES 256 CBC tests (from NIST test vectors, encrypt)
-
-#AES-256-CBC:0000000000000000000000000000000000000000000000000000000000000000:00000000000000000000000000000000:00000000000000000000000000000000:FE3C53653E2F45B56FCD88B2CC898FF0:1
-
-# AES 128 CBC tests (from NIST test vectors, decrypt)
-
-#AES-128-CBC:00000000000000000000000000000000:00000000000000000000000000000000:FACA37E0B0C85373DF706E73F7C9AF86:00000000000000000000000000000000:0
-
-# AES tests from NIST document SP800-38A
-# For all ECB encrypts and decrypts, the transformed sequence is
-#   AES-bits-ECB:key::plaintext:ciphertext:encdec
-# ECB-AES128.Encrypt and ECB-AES128.Decrypt
-AES-128-ECB:2B7E151628AED2A6ABF7158809CF4F3C::6BC1BEE22E409F96E93D7E117393172A:3AD77BB40D7A3660A89ECAF32466EF97
-AES-128-ECB:2B7E151628AED2A6ABF7158809CF4F3C::AE2D8A571E03AC9C9EB76FAC45AF8E51:F5D3D58503B9699DE785895A96FDBAAF
-AES-128-ECB:2B7E151628AED2A6ABF7158809CF4F3C::30C81C46A35CE411E5FBC1191A0A52EF:43B1CD7F598ECE23881B00E3ED030688
-AES-128-ECB:2B7E151628AED2A6ABF7158809CF4F3C::F69F2445DF4F9B17AD2B417BE66C3710:7B0C785E27E8AD3F8223207104725DD4
-# ECB-AES192.Encrypt and ECB-AES192.Decrypt 
-AES-192-ECB:8E73B0F7DA0E6452C810F32B809079E562F8EAD2522C6B7B::6BC1BEE22E409F96E93D7E117393172A:BD334F1D6E45F25FF712A214571FA5CC
-AES-192-ECB:8E73B0F7DA0E6452C810F32B809079E562F8EAD2522C6B7B::AE2D8A571E03AC9C9EB76FAC45AF8E51:974104846D0AD3AD7734ECB3ECEE4EEF
-AES-192-ECB:8E73B0F7DA0E6452C810F32B809079E562F8EAD2522C6B7B::30C81C46A35CE411E5FBC1191A0A52EF:EF7AFD2270E2E60ADCE0BA2FACE6444E
-AES-192-ECB:8E73B0F7DA0E6452C810F32B809079E562F8EAD2522C6B7B::F69F2445DF4F9B17AD2B417BE66C3710:9A4B41BA738D6C72FB16691603C18E0E
-# ECB-AES256.Encrypt and ECB-AES256.Decrypt 
-AES-256-ECB:603DEB1015CA71BE2B73AEF0857D77811F352C073B6108D72D9810A30914DFF4::6BC1BEE22E409F96E93D7E117393172A:F3EED1BDB5D2A03C064B5A7E3DB181F8
-AES-256-ECB:603DEB1015CA71BE2B73AEF0857D77811F352C073B6108D72D9810A30914DFF4::AE2D8A571E03AC9C9EB76FAC45AF8E51:591CCB10D410ED26DC5BA74A31362870
-AES-256-ECB:603DEB1015CA71BE2B73AEF0857D77811F352C073B6108D72D9810A30914DFF4::30C81C46A35CE411E5FBC1191A0A52EF:B6ED21B99CA6F4F9F153E7B1BEAFED1D
-AES-256-ECB:603DEB1015CA71BE2B73AEF0857D77811F352C073B6108D72D9810A30914DFF4::F69F2445DF4F9B17AD2B417BE66C3710:23304B7A39F9F3FF067D8D8F9E24ECC7
-# For all CBC encrypts and decrypts, the transformed sequence is
-#   AES-bits-CBC:key:IV/ciphertext':plaintext:ciphertext:encdec
-# CBC-AES128.Encrypt and CBC-AES128.Decrypt 
-AES-128-CBC:2B7E151628AED2A6ABF7158809CF4F3C:000102030405060708090A0B0C0D0E0F:6BC1BEE22E409F96E93D7E117393172A:7649ABAC8119B246CEE98E9B12E9197D
-AES-128-CBC:2B7E151628AED2A6ABF7158809CF4F3C:7649ABAC8119B246CEE98E9B12E9197D:AE2D8A571E03AC9C9EB76FAC45AF8E51:5086CB9B507219EE95DB113A917678B2
-AES-128-CBC:2B7E151628AED2A6ABF7158809CF4F3C:5086CB9B507219EE95DB113A917678B2:30C81C46A35CE411E5FBC1191A0A52EF:73BED6B8E3C1743B7116E69E22229516
-AES-128-CBC:2B7E151628AED2A6ABF7158809CF4F3C:73BED6B8E3C1743B7116E69E22229516:F69F2445DF4F9B17AD2B417BE66C3710:3FF1CAA1681FAC09120ECA307586E1A7
-# CBC-AES192.Encrypt and CBC-AES192.Decrypt 
-AES-192-CBC:8E73B0F7DA0E6452C810F32B809079E562F8EAD2522C6B7B:000102030405060708090A0B0C0D0E0F:6BC1BEE22E409F96E93D7E117393172A:4F021DB243BC633D7178183A9FA071E8
-AES-192-CBC:8E73B0F7DA0E6452C810F32B809079E562F8EAD2522C6B7B:4F021DB243BC633D7178183A9FA071E8:AE2D8A571E03AC9C9EB76FAC45AF8E51:B4D9ADA9AD7DEDF4E5E738763F69145A
-AES-192-CBC:8E73B0F7DA0E6452C810F32B809079E562F8EAD2522C6B7B:B4D9ADA9AD7DEDF4E5E738763F69145A:30C81C46A35CE411E5FBC1191A0A52EF:571B242012FB7AE07FA9BAAC3DF102E0
-AES-192-CBC:8E73B0F7DA0E6452C810F32B809079E562F8EAD2522C6B7B:571B242012FB7AE07FA9BAAC3DF102E0:F69F2445DF4F9B17AD2B417BE66C3710:08B0E27988598881D920A9E64F5615CD
-# CBC-AES256.Encrypt and CBC-AES256.Decrypt 
-AES-256-CBC:603DEB1015CA71BE2B73AEF0857D77811F352C073B6108D72D9810A30914DFF4:000102030405060708090A0B0C0D0E0F:6BC1BEE22E409F96E93D7E117393172A:F58C4C04D6E5F1BA779EABFB5F7BFBD6
-AES-256-CBC:603DEB1015CA71BE2B73AEF0857D77811F352C073B6108D72D9810A30914DFF4:F58C4C04D6E5F1BA779EABFB5F7BFBD6:AE2D8A571E03AC9C9EB76FAC45AF8E51:9CFC4E967EDB808D679F777BC6702C7D
-AES-256-CBC:603DEB1015CA71BE2B73AEF0857D77811F352C073B6108D72D9810A30914DFF4:9CFC4E967EDB808D679F777BC6702C7D:30C81C46A35CE411E5FBC1191A0A52EF:39F23369A9D9BACFA530E26304231461
-AES-256-CBC:603DEB1015CA71BE2B73AEF0857D77811F352C073B6108D72D9810A30914DFF4:39F23369A9D9BACFA530E26304231461:F69F2445DF4F9B17AD2B417BE66C3710:B2EB05E2C39BE9FCDA6C19078C6A9D1B
-# We don't support CFB{1,8}-AESxxx.{En,De}crypt
-# For all CFB128 encrypts and decrypts, the transformed sequence is
-#   AES-bits-CFB:key:IV/ciphertext':plaintext:ciphertext:encdec
-# CFB128-AES128.Encrypt 
-AES-128-CFB:2B7E151628AED2A6ABF7158809CF4F3C:000102030405060708090A0B0C0D0E0F:6BC1BEE22E409F96E93D7E117393172A:3B3FD92EB72DAD20333449F8E83CFB4A:1
-AES-128-CFB:2B7E151628AED2A6ABF7158809CF4F3C:3B3FD92EB72DAD20333449F8E83CFB4A:AE2D8A571E03AC9C9EB76FAC45AF8E51:C8A64537A0B3A93FCDE3CDAD9F1CE58B:1
-AES-128-CFB:2B7E151628AED2A6ABF7158809CF4F3C:C8A64537A0B3A93FCDE3CDAD9F1CE58B:30C81C46A35CE411E5FBC1191A0A52EF:26751F67A3CBB140B1808CF187A4F4DF:1
-AES-128-CFB:2B7E151628AED2A6ABF7158809CF4F3C:26751F67A3CBB140B1808CF187A4F4DF:F69F2445DF4F9B17AD2B417BE66C3710:C04B05357C5D1C0EEAC4C66F9FF7F2E6:1
-# CFB128-AES128.Decrypt 
-AES-128-CFB:2B7E151628AED2A6ABF7158809CF4F3C:000102030405060708090A0B0C0D0E0F:6BC1BEE22E409F96E93D7E117393172A:3B3FD92EB72DAD20333449F8E83CFB4A:0
-AES-128-CFB:2B7E151628AED2A6ABF7158809CF4F3C:3B3FD92EB72DAD20333449F8E83CFB4A:AE2D8A571E03AC9C9EB76FAC45AF8E51:C8A64537A0B3A93FCDE3CDAD9F1CE58B:0
-AES-128-CFB:2B7E151628AED2A6ABF7158809CF4F3C:C8A64537A0B3A93FCDE3CDAD9F1CE58B:30C81C46A35CE411E5FBC1191A0A52EF:26751F67A3CBB140B1808CF187A4F4DF:0
-AES-128-CFB:2B7E151628AED2A6ABF7158809CF4F3C:26751F67A3CBB140B1808CF187A4F4DF:F69F2445DF4F9B17AD2B417BE66C3710:C04B05357C5D1C0EEAC4C66F9FF7F2E6:0
-# CFB128-AES192.Encrypt
-AES-192-CFB:8E73B0F7DA0E6452C810F32B809079E562F8EAD2522C6B7B:000102030405060708090A0B0C0D0E0F:6BC1BEE22E409F96E93D7E117393172A:CDC80D6FDDF18CAB34C25909C99A4174:1
-AES-192-CFB:8E73B0F7DA0E6452C810F32B809079E562F8EAD2522C6B7B:CDC80D6FDDF18CAB34C25909C99A4174:AE2D8A571E03AC9C9EB76FAC45AF8E51:67CE7F7F81173621961A2B70171D3D7A:1
-AES-192-CFB:8E73B0F7DA0E6452C810F32B809079E562F8EAD2522C6B7B:67CE7F7F81173621961A2B70171D3D7A:30C81C46A35CE411E5FBC1191A0A52EF:2E1E8A1DD59B88B1C8E60FED1EFAC4C9:1
-AES-192-CFB:8E73B0F7DA0E6452C810F32B809079E562F8EAD2522C6B7B:2E1E8A1DD59B88B1C8E60FED1EFAC4C9:F69F2445DF4F9B17AD2B417BE66C3710:C05F9F9CA9834FA042AE8FBA584B09FF:1
-# CFB128-AES192.Decrypt
-AES-192-CFB:8E73B0F7DA0E6452C810F32B809079E562F8EAD2522C6B7B:000102030405060708090A0B0C0D0E0F:6BC1BEE22E409F96E93D7E117393172A:CDC80D6FDDF18CAB34C25909C99A4174:0
-AES-192-CFB:8E73B0F7DA0E6452C810F32B809079E562F8EAD2522C6B7B:CDC80D6FDDF18CAB34C25909C99A4174:AE2D8A571E03AC9C9EB76FAC45AF8E51:67CE7F7F81173621961A2B70171D3D7A:0
-AES-192-CFB:8E73B0F7DA0E6452C810F32B809079E562F8EAD2522C6B7B:67CE7F7F81173621961A2B70171D3D7A:30C81C46A35CE411E5FBC1191A0A52EF:2E1E8A1DD59B88B1C8E60FED1EFAC4C9:0
-AES-192-CFB:8E73B0F7DA0E6452C810F32B809079E562F8EAD2522C6B7B:2E1E8A1DD59B88B1C8E60FED1EFAC4C9:F69F2445DF4F9B17AD2B417BE66C3710:C05F9F9CA9834FA042AE8FBA584B09FF:0
-# CFB128-AES256.Encrypt 
-AES-256-CFB:603DEB1015CA71BE2B73AEF0857D77811F352C073B6108D72D9810A30914DFF4:000102030405060708090A0B0C0D0E0F:6BC1BEE22E409F96E93D7E117393172A:DC7E84BFDA79164B7ECD8486985D3860:1
-AES-256-CFB:603DEB1015CA71BE2B73AEF0857D77811F352C073B6108D72D9810A30914DFF4:DC7E84BFDA79164B7ECD8486985D3860:AE2D8A571E03AC9C9EB76FAC45AF8E51:39FFED143B28B1C832113C6331E5407B:1
-AES-256-CFB:603DEB1015CA71BE2B73AEF0857D77811F352C073B6108D72D9810A30914DFF4:39FFED143B28B1C832113C6331E5407B:30C81C46A35CE411E5FBC1191A0A52EF:DF10132415E54B92A13ED0A8267AE2F9:1
-AES-256-CFB:603DEB1015CA71BE2B73AEF0857D77811F352C073B6108D72D9810A30914DFF4:DF10132415E54B92A13ED0A8267AE2F9:F69F2445DF4F9B17AD2B417BE66C3710:75A385741AB9CEF82031623D55B1E471:1
-# CFB128-AES256.Decrypt 
-AES-256-CFB:603DEB1015CA71BE2B73AEF0857D77811F352C073B6108D72D9810A30914DFF4:000102030405060708090A0B0C0D0E0F:6BC1BEE22E409F96E93D7E117393172A:DC7E84BFDA79164B7ECD8486985D3860:0
-AES-256-CFB:603DEB1015CA71BE2B73AEF0857D77811F352C073B6108D72D9810A30914DFF4:DC7E84BFDA79164B7ECD8486985D3860:AE2D8A571E03AC9C9EB76FAC45AF8E51:39FFED143B28B1C832113C6331E5407B:0
-AES-256-CFB:603DEB1015CA71BE2B73AEF0857D77811F352C073B6108D72D9810A30914DFF4:39FFED143B28B1C832113C6331E5407B:30C81C46A35CE411E5FBC1191A0A52EF:DF10132415E54B92A13ED0A8267AE2F9:0
-AES-256-CFB:603DEB1015CA71BE2B73AEF0857D77811F352C073B6108D72D9810A30914DFF4:DF10132415E54B92A13ED0A8267AE2F9:F69F2445DF4F9B17AD2B417BE66C3710:75A385741AB9CEF82031623D55B1E471:0
-# For all OFB encrypts and decrypts, the transformed sequence is
-#   AES-bits-CFB:key:IV/output':plaintext:ciphertext:encdec
-# OFB-AES128.Encrypt 
-AES-128-OFB:2B7E151628AED2A6ABF7158809CF4F3C:000102030405060708090A0B0C0D0E0F:6BC1BEE22E409F96E93D7E117393172A:3B3FD92EB72DAD20333449F8E83CFB4A:1 
-AES-128-OFB:2B7E151628AED2A6ABF7158809CF4F3C:50FE67CC996D32B6DA0937E99BAFEC60:AE2D8A571E03AC9C9EB76FAC45AF8E51:7789508D16918F03F53C52DAC54ED825:1 
-AES-128-OFB:2B7E151628AED2A6ABF7158809CF4F3C:D9A4DADA0892239F6B8B3D7680E15674:30C81C46A35CE411E5FBC1191A0A52EF:9740051E9C5FECF64344F7A82260EDCC:1 
-AES-128-OFB:2B7E151628AED2A6ABF7158809CF4F3C:A78819583F0308E7A6BF36B1386ABF23:F69F2445DF4F9B17AD2B417BE66C3710:304C6528F659C77866A510D9C1D6AE5E:1 
-# OFB-AES128.Decrypt 
-AES-128-OFB:2B7E151628AED2A6ABF7158809CF4F3C:000102030405060708090A0B0C0D0E0F:6BC1BEE22E409F96E93D7E117393172A:3B3FD92EB72DAD20333449F8E83CFB4A:0
-AES-128-OFB:2B7E151628AED2A6ABF7158809CF4F3C:50FE67CC996D32B6DA0937E99BAFEC60:AE2D8A571E03AC9C9EB76FAC45AF8E51:7789508D16918F03F53C52DAC54ED825:0
-AES-128-OFB:2B7E151628AED2A6ABF7158809CF4F3C:D9A4DADA0892239F6B8B3D7680E15674:30C81C46A35CE411E5FBC1191A0A52EF:9740051E9C5FECF64344F7A82260EDCC:0
-AES-128-OFB:2B7E151628AED2A6ABF7158809CF4F3C:A78819583F0308E7A6BF36B1386ABF23:F69F2445DF4F9B17AD2B417BE66C3710:304C6528F659C77866A510D9C1D6AE5E:0
-# OFB-AES192.Encrypt 
-AES-192-OFB:8E73B0F7DA0E6452C810F32B809079E562F8EAD2522C6B7B:000102030405060708090A0B0C0D0E0F:6BC1BEE22E409F96E93D7E117393172A:CDC80D6FDDF18CAB34C25909C99A4174:1 
-AES-192-OFB:8E73B0F7DA0E6452C810F32B809079E562F8EAD2522C6B7B:A609B38DF3B1133DDDFF2718BA09565E:AE2D8A571E03AC9C9EB76FAC45AF8E51:FCC28B8D4C63837C09E81700C1100401:1 
-AES-192-OFB:8E73B0F7DA0E6452C810F32B809079E562F8EAD2522C6B7B:52EF01DA52602FE0975F78AC84BF8A50:30C81C46A35CE411E5FBC1191A0A52EF:8D9A9AEAC0F6596F559C6D4DAF59A5F2:1 
-AES-192-OFB:8E73B0F7DA0E6452C810F32B809079E562F8EAD2522C6B7B:BD5286AC63AABD7EB067AC54B553F71D:F69F2445DF4F9B17AD2B417BE66C3710:6D9F200857CA6C3E9CAC524BD9ACC92A:1 
-# OFB-AES192.Decrypt 
-AES-192-OFB:8E73B0F7DA0E6452C810F32B809079E562F8EAD2522C6B7B:000102030405060708090A0B0C0D0E0F:6BC1BEE22E409F96E93D7E117393172A:CDC80D6FDDF18CAB34C25909C99A4174:0 
-AES-192-OFB:8E73B0F7DA0E6452C810F32B809079E562F8EAD2522C6B7B:A609B38DF3B1133DDDFF2718BA09565E:AE2D8A571E03AC9C9EB76FAC45AF8E51:FCC28B8D4C63837C09E81700C1100401:0 
-AES-192-OFB:8E73B0F7DA0E6452C810F32B809079E562F8EAD2522C6B7B:52EF01DA52602FE0975F78AC84BF8A50:30C81C46A35CE411E5FBC1191A0A52EF:8D9A9AEAC0F6596F559C6D4DAF59A5F2:0 
-AES-192-OFB:8E73B0F7DA0E6452C810F32B809079E562F8EAD2522C6B7B:BD5286AC63AABD7EB067AC54B553F71D:F69F2445DF4F9B17AD2B417BE66C3710:6D9F200857CA6C3E9CAC524BD9ACC92A:0 
-# OFB-AES256.Encrypt 
-AES-256-OFB:603DEB1015CA71BE2B73AEF0857D77811F352C073B6108D72D9810A30914DFF4:000102030405060708090A0B0C0D0E0F:6BC1BEE22E409F96E93D7E117393172A:DC7E84BFDA79164B7ECD8486985D3860:1
-AES-256-OFB:603DEB1015CA71BE2B73AEF0857D77811F352C073B6108D72D9810A30914DFF4:B7BF3A5DF43989DD97F0FA97EBCE2F4A:AE2D8A571E03AC9C9EB76FAC45AF8E51:4FEBDC6740D20B3AC88F6AD82A4FB08D:1
-AES-256-OFB:603DEB1015CA71BE2B73AEF0857D77811F352C073B6108D72D9810A30914DFF4:E1C656305ED1A7A6563805746FE03EDC:30C81C46A35CE411E5FBC1191A0A52EF:71AB47A086E86EEDF39D1C5BBA97C408:1
-AES-256-OFB:603DEB1015CA71BE2B73AEF0857D77811F352C073B6108D72D9810A30914DFF4:41635BE625B48AFC1666DD42A09D96E7:F69F2445DF4F9B17AD2B417BE66C3710:0126141D67F37BE8538F5A8BE740E484:1
-# OFB-AES256.Decrypt 
-AES-256-OFB:603DEB1015CA71BE2B73AEF0857D77811F352C073B6108D72D9810A30914DFF4:000102030405060708090A0B0C0D0E0F:6BC1BEE22E409F96E93D7E117393172A:DC7E84BFDA79164B7ECD8486985D3860:0
-AES-256-OFB:603DEB1015CA71BE2B73AEF0857D77811F352C073B6108D72D9810A30914DFF4:B7BF3A5DF43989DD97F0FA97EBCE2F4A:AE2D8A571E03AC9C9EB76FAC45AF8E51:4FEBDC6740D20B3AC88F6AD82A4FB08D:0
-AES-256-OFB:603DEB1015CA71BE2B73AEF0857D77811F352C073B6108D72D9810A30914DFF4:E1C656305ED1A7A6563805746FE03EDC:30C81C46A35CE411E5FBC1191A0A52EF:71AB47A086E86EEDF39D1C5BBA97C408:0
-AES-256-OFB:603DEB1015CA71BE2B73AEF0857D77811F352C073B6108D72D9810A30914DFF4:41635BE625B48AFC1666DD42A09D96E7:F69F2445DF4F9B17AD2B417BE66C3710:0126141D67F37BE8538F5A8BE740E484:0
-
-# DES ECB tests (from destest)
-
-DES-ECB:0000000000000000::0000000000000000:8CA64DE9C1B123A7
-DES-ECB:FFFFFFFFFFFFFFFF::FFFFFFFFFFFFFFFF:7359B2163E4EDC58
-DES-ECB:3000000000000000::1000000000000001:958E6E627A05557B
-DES-ECB:1111111111111111::1111111111111111:F40379AB9E0EC533
-DES-ECB:0123456789ABCDEF::1111111111111111:17668DFC7292532D
-DES-ECB:1111111111111111::0123456789ABCDEF:8A5AE1F81AB8F2DD
-DES-ECB:FEDCBA9876543210::0123456789ABCDEF:ED39D950FA74BCC4
-
-# DESX-CBC tests (from destest)
-DESX-CBC:0123456789abcdeff1e0d3c2b5a49786fedcba9876543210:fedcba9876543210:37363534333231204E6F77206973207468652074696D6520666F722000000000:846B2914851E9A2954732F8AA0A611C115CDC2D7951B1053A63C5E03B21AA3C4
-
-# DES EDE3 CBC tests (from destest)
-DES-EDE3-CBC:0123456789abcdeff1e0d3c2b5a49786fedcba9876543210:fedcba9876543210:37363534333231204E6F77206973207468652074696D6520666F722000000000:3FE301C962AC01D02213763C1CBD4CDC799657C064ECF5D41C673812CFDE9675
-
-# RC4 tests (from rc4test)
-RC4:0123456789abcdef0123456789abcdef::0123456789abcdef:75b7878099e0c596
-RC4:0123456789abcdef0123456789abcdef::0000000000000000:7494c2e7104b0879
-RC4:00000000000000000000000000000000::0000000000000000:de188941a3375d3a
-RC4:ef012345ef012345ef012345ef012345::0000000000000000000000000000000000000000:d6a141a7ec3c38dfbd615a1162e1c7ba36b67858
-RC4:0123456789abcdef0123456789abcdef::123456789ABCDEF0123456789ABCDEF0123456789ABCDEF012345678:66a0949f8af7d6891f7f832ba833c00c892ebe30143ce28740011ecf
-RC4:ef012345ef012345ef012345ef012345::00000000000000000000:d6a141a7ec3c38dfbd61
-
-
-# Camellia tests from RFC3713
-# For all ECB encrypts and decrypts, the transformed sequence is
-#   CAMELLIA-bits-ECB:key::plaintext:ciphertext:encdec
-CAMELLIA-128-ECB:0123456789abcdeffedcba9876543210::0123456789abcdeffedcba9876543210:67673138549669730857065648eabe43
-CAMELLIA-192-ECB:0123456789abcdeffedcba98765432100011223344556677::0123456789abcdeffedcba9876543210:b4993401b3e996f84ee5cee7d79b09b9
-CAMELLIA-256-ECB:0123456789abcdeffedcba987654321000112233445566778899aabbccddeeff::0123456789abcdeffedcba9876543210:9acc237dff16d76c20ef7c919e3a7509
-
-# ECB-CAMELLIA128.Encrypt
-CAMELLIA-128-ECB:000102030405060708090A0B0C0D0E0F::00112233445566778899AABBCCDDEEFF:77CF412067AF8270613529149919546F:1
-CAMELLIA-192-ECB:000102030405060708090A0B0C0D0E0F1011121314151617::00112233445566778899AABBCCDDEEFF:B22F3C36B72D31329EEE8ADDC2906C68:1
-CAMELLIA-256-ECB:000102030405060708090A0B0C0D0E0F101112131415161718191A1B1C1D1E1F::00112233445566778899AABBCCDDEEFF:2EDF1F3418D53B88841FC8985FB1ECF2:1
-
-# ECB-CAMELLIA128.Encrypt and ECB-CAMELLIA128.Decrypt 
-CAMELLIA-128-ECB:2B7E151628AED2A6ABF7158809CF4F3C::6BC1BEE22E409F96E93D7E117393172A:432FC5DCD628115B7C388D770B270C96
-CAMELLIA-128-ECB:2B7E151628AED2A6ABF7158809CF4F3C::AE2D8A571E03AC9C9EB76FAC45AF8E51:0BE1F14023782A22E8384C5ABB7FAB2B
-CAMELLIA-128-ECB:2B7E151628AED2A6ABF7158809CF4F3C::30C81C46A35CE411E5FBC1191A0A52EF:A0A1ABCD1893AB6FE0FE5B65DF5F8636
-CAMELLIA-128-ECB:2B7E151628AED2A6ABF7158809CF4F3C::F69F2445DF4F9B17AD2B417BE66C3710:E61925E0D5DFAA9BB29F815B3076E51A
-
-# ECB-CAMELLIA192.Encrypt and ECB-CAMELLIA192.Decrypt 
-CAMELLIA-192-ECB:8E73B0F7DA0E6452C810F32B809079E562F8EAD2522C6B7B::6BC1BEE22E409F96E93D7E117393172A:CCCC6C4E138B45848514D48D0D3439D3
-CAMELLIA-192-ECB:8E73B0F7DA0E6452C810F32B809079E562F8EAD2522C6B7B::AE2D8A571E03AC9C9EB76FAC45AF8E51:5713C62C14B2EC0F8393B6AFD6F5785A
-CAMELLIA-192-ECB:8E73B0F7DA0E6452C810F32B809079E562F8EAD2522C6B7B::30C81C46A35CE411E5FBC1191A0A52EF:B40ED2B60EB54D09D030CF511FEEF366
-CAMELLIA-192-ECB:8E73B0F7DA0E6452C810F32B809079E562F8EAD2522C6B7B::F69F2445DF4F9B17AD2B417BE66C3710:909DBD95799096748CB27357E73E1D26
-
-# ECB-CAMELLIA256.Encrypt and ECB-CAMELLIA256.Decrypt 
-CAMELLIA-256-ECB:603DEB1015CA71BE2B73AEF0857D77811F352C073B6108D72D9810A30914DFF4::6BC1BEE22E409F96E93D7E117393172A:BEFD219B112FA00098919CD101C9CCFA
-CAMELLIA-256-ECB:603DEB1015CA71BE2B73AEF0857D77811F352C073B6108D72D9810A30914DFF4::AE2D8A571E03AC9C9EB76FAC45AF8E51:C91D3A8F1AEA08A9386CF4B66C0169EA
-CAMELLIA-256-ECB:603DEB1015CA71BE2B73AEF0857D77811F352C073B6108D72D9810A30914DFF4::30C81C46A35CE411E5FBC1191A0A52EF:A623D711DC5F25A51BB8A80D56397D28
-CAMELLIA-256-ECB:603DEB1015CA71BE2B73AEF0857D77811F352C073B6108D72D9810A30914DFF4::F69F2445DF4F9B17AD2B417BE66C3710:7960109FB6DC42947FCFE59EA3C5EB6B
-
-# For all CBC encrypts and decrypts, the transformed sequence is
-#   CAMELLIA-bits-CBC:key:IV/ciphertext':plaintext:ciphertext:encdec
-# CBC-CAMELLIA128.Encrypt and CBC-CAMELLIA128.Decrypt 
-CAMELLIA-128-CBC:2B7E151628AED2A6ABF7158809CF4F3C:000102030405060708090A0B0C0D0E0F:6BC1BEE22E409F96E93D7E117393172A:1607CF494B36BBF00DAEB0B503C831AB
-CAMELLIA-128-CBC:2B7E151628AED2A6ABF7158809CF4F3C:1607CF494B36BBF00DAEB0B503C831AB:AE2D8A571E03AC9C9EB76FAC45AF8E51:A2F2CF671629EF7840C5A5DFB5074887
-CAMELLIA-128-CBC:2B7E151628AED2A6ABF7158809CF4F3C:A2F2CF671629EF7840C5A5DFB5074887:30C81C46A35CE411E5FBC1191A0A52EF:0F06165008CF8B8B5A63586362543E54
-CAMELLIA-128-CBC:2B7E151628AED2A6ABF7158809CF4F3C:36A84CDAFD5F9A85ADA0F0A993D6D577:F69F2445DF4F9B17AD2B417BE66C3710:74C64268CDB8B8FAF5B34E8AF3732980
-
-# CBC-CAMELLIA192.Encrypt and CBC-CAMELLIA192.Decrypt 
-CAMELLIA-192-CBC:8E73B0F7DA0E6452C810F32B809079E562F8EAD2522C6B7B:000102030405060708090A0B0C0D0E0F:6BC1BEE22E409F96E93D7E117393172A:2A4830AB5AC4A1A2405955FD2195CF93
-CAMELLIA-192-CBC:8E73B0F7DA0E6452C810F32B809079E562F8EAD2522C6B7B:2A4830AB5AC4A1A2405955FD2195CF93:AE2D8A571E03AC9C9EB76FAC45AF8E51:5D5A869BD14CE54264F892A6DD2EC3D5
-CAMELLIA-192-CBC:8E73B0F7DA0E6452C810F32B809079E562F8EAD2522C6B7B:5D5A869BD14CE54264F892A6DD2EC3D5:30C81C46A35CE411E5FBC1191A0A52EF:37D359C3349836D884E310ADDF68C449
-CAMELLIA-192-CBC:8E73B0F7DA0E6452C810F32B809079E562F8EAD2522C6B7B:37D359C3349836D884E310ADDF68C449:F69F2445DF4F9B17AD2B417BE66C3710:01FAAA930B4AB9916E9668E1428C6B08
-
-# CBC-CAMELLIA256.Encrypt and CBC-CAMELLIA256.Decrypt 
-CAMELLIA-256-CBC:603DEB1015CA71BE2B73AEF0857D77811F352C073B6108D72D9810A30914DFF4:000102030405060708090A0B0C0D0E0F:6BC1BEE22E409F96E93D7E117393172A:E6CFA35FC02B134A4D2C0B6737AC3EDA
-CAMELLIA-256-CBC:603DEB1015CA71BE2B73AEF0857D77811F352C073B6108D72D9810A30914DFF4:E6CFA35FC02B134A4D2C0B6737AC3EDA:AE2D8A571E03AC9C9EB76FAC45AF8E51:36CBEB73BD504B4070B1B7DE2B21EB50
-CAMELLIA-256-CBC:603DEB1015CA71BE2B73AEF0857D77811F352C073B6108D72D9810A30914DFF4:36CBEB73BD504B4070B1B7DE2B21EB50:30C81C46A35CE411E5FBC1191A0A52EF:E31A6055297D96CA3330CDF1B1860A83
-CAMELLIA-256-CBC:603DEB1015CA71BE2B73AEF0857D77811F352C073B6108D72D9810A30914DFF4:E31A6055297D96CA3330CDF1B1860A83:F69F2445DF4F9B17AD2B417BE66C3710:5D563F6D1CCCF236051C0C5C1C58F28F
-
-# We don't support CFB{1,8}-CAMELLIAxxx.{En,De}crypt
-# For all CFB128 encrypts and decrypts, the transformed sequence is
-#   CAMELLIA-bits-CFB:key:IV/ciphertext':plaintext:ciphertext:encdec
-# CFB128-CAMELLIA128.Encrypt 
-CAMELLIA-128-CFB:2B7E151628AED2A6ABF7158809CF4F3C:000102030405060708090A0B0C0D0E0F:6BC1BEE22E409F96E93D7E117393172A:14F7646187817EB586599146B82BD719:1
-CAMELLIA-128-CFB:2B7E151628AED2A6ABF7158809CF4F3C:14F7646187817EB586599146B82BD719:AE2D8A571E03AC9C9EB76FAC45AF8E51:A53D28BB82DF741103EA4F921A44880B:1
-CAMELLIA-128-CFB:2B7E151628AED2A6ABF7158809CF4F3C:A53D28BB82DF741103EA4F921A44880B:30C81C46A35CE411E5FBC1191A0A52EF:9C2157A664626D1DEF9EA420FDE69B96:1
-CAMELLIA-128-CFB:2B7E151628AED2A6ABF7158809CF4F3C:9C2157A664626D1DEF9EA420FDE69B96:F69F2445DF4F9B17AD2B417BE66C3710:742A25F0542340C7BAEF24CA8482BB09:1
-
-# CFB128-CAMELLIA128.Decrypt 
-CAMELLIA-128-CFB:2B7E151628AED2A6ABF7158809CF4F3C:000102030405060708090A0B0C0D0E0F:6BC1BEE22E409F96E93D7E117393172A:14F7646187817EB586599146B82BD719:0
-CAMELLIA-128-CFB:2B7E151628AED2A6ABF7158809CF4F3C:14F7646187817EB586599146B82BD719:AE2D8A571E03AC9C9EB76FAC45AF8E51:A53D28BB82DF741103EA4F921A44880B:0
-CAMELLIA-128-CFB:2B7E151628AED2A6ABF7158809CF4F3C:A53D28BB82DF741103EA4F921A44880B:30C81C46A35CE411E5FBC1191A0A52EF:9C2157A664626D1DEF9EA420FDE69B96:0
-CAMELLIA-128-CFB:2B7E151628AED2A6ABF7158809CF4F3C:9C2157A664626D1DEF9EA420FDE69B96:F69F2445DF4F9B17AD2B417BE66C3710:742A25F0542340C7BAEF24CA8482BB09:0
-
-# CFB128-CAMELLIA192.Encrypt
-CAMELLIA-192-CFB:8E73B0F7DA0E6452C810F32B809079E562F8EAD2522C6B7B:000102030405060708090A0B0C0D0E0F:6BC1BEE22E409F96E93D7E117393172A:C832BB9780677DAA82D9B6860DCD565E:1
-CAMELLIA-192-CFB:8E73B0F7DA0E6452C810F32B809079E562F8EAD2522C6B7B:C832BB9780677DAA82D9B6860DCD565E:AE2D8A571E03AC9C9EB76FAC45AF8E51:86F8491627906D780C7A6D46EA331F98:1
-CAMELLIA-192-CFB:8E73B0F7DA0E6452C810F32B809079E562F8EAD2522C6B7B:86F8491627906D780C7A6D46EA331F98:30C81C46A35CE411E5FBC1191A0A52EF:69511CCE594CF710CB98BB63D7221F01:1
-CAMELLIA-192-CFB:8E73B0F7DA0E6452C810F32B809079E562F8EAD2522C6B7B:69511CCE594CF710CB98BB63D7221F01:F69F2445DF4F9B17AD2B417BE66C3710:D5B5378A3ABED55803F25565D8907B84:1
-
-# CFB128-CAMELLIA192.Decrypt
-CAMELLIA-192-CFB:8E73B0F7DA0E6452C810F32B809079E562F8EAD2522C6B7B:000102030405060708090A0B0C0D0E0F:6BC1BEE22E409F96E93D7E117393172A:C832BB9780677DAA82D9B6860DCD565E:0
-CAMELLIA-192-CFB:8E73B0F7DA0E6452C810F32B809079E562F8EAD2522C6B7B:C832BB9780677DAA82D9B6860DCD565E:AE2D8A571E03AC9C9EB76FAC45AF8E51:86F8491627906D780C7A6D46EA331F98:0
-CAMELLIA-192-CFB:8E73B0F7DA0E6452C810F32B809079E562F8EAD2522C6B7B:86F8491627906D780C7A6D46EA331F98:30C81C46A35CE411E5FBC1191A0A52EF:69511CCE594CF710CB98BB63D7221F01:0
-CAMELLIA-192-CFB:8E73B0F7DA0E6452C810F32B809079E562F8EAD2522C6B7B:69511CCE594CF710CB98BB63D7221F01:F69F2445DF4F9B17AD2B417BE66C3710:D5B5378A3ABED55803F25565D8907B84:0
-
-# CFB128-CAMELLIA256.Encrypt 
-CAMELLIA-256-CFB:603DEB1015CA71BE2B73AEF0857D77811F352C073B6108D72D9810A30914DFF4:000102030405060708090A0B0C0D0E0F:6BC1BEE22E409F96E93D7E117393172A:CF6107BB0CEA7D7FB1BD31F5E7B06C93:1
-CAMELLIA-256-CFB:603DEB1015CA71BE2B73AEF0857D77811F352C073B6108D72D9810A30914DFF4:CF6107BB0CEA7D7FB1BD31F5E7B06C93:AE2D8A571E03AC9C9EB76FAC45AF8E51:89BEDB4CCDD864EA11BA4CBE849B5E2B:1
-CAMELLIA-256-CFB:603DEB1015CA71BE2B73AEF0857D77811F352C073B6108D72D9810A30914DFF4:89BEDB4CCDD864EA11BA4CBE849B5E2B:30C81C46A35CE411E5FBC1191A0A52EF:555FC3F34BDD2D54C62D9E3BF338C1C4:1
-CAMELLIA-256-CFB:603DEB1015CA71BE2B73AEF0857D77811F352C073B6108D72D9810A30914DFF4:555FC3F34BDD2D54C62D9E3BF338C1C4:F69F2445DF4F9B17AD2B417BE66C3710:5953ADCE14DB8C7F39F1BD39F359BFFA:1
-
-# CFB128-CAMELLIA256.Decrypt 
-CAMELLIA-256-CFB:603DEB1015CA71BE2B73AEF0857D77811F352C073B6108D72D9810A30914DFF4:000102030405060708090A0B0C0D0E0F:6BC1BEE22E409F96E93D7E117393172A:CF6107BB0CEA7D7FB1BD31F5E7B06C93:0
-CAMELLIA-256-CFB:603DEB1015CA71BE2B73AEF0857D77811F352C073B6108D72D9810A30914DFF4:CF6107BB0CEA7D7FB1BD31F5E7B06C93:AE2D8A571E03AC9C9EB76FAC45AF8E51:89BEDB4CCDD864EA11BA4CBE849B5E2B:0
-CAMELLIA-256-CFB:603DEB1015CA71BE2B73AEF0857D77811F352C073B6108D72D9810A30914DFF4:89BEDB4CCDD864EA11BA4CBE849B5E2B:30C81C46A35CE411E5FBC1191A0A52EF:555FC3F34BDD2D54C62D9E3BF338C1C4:0
-CAMELLIA-256-CFB:603DEB1015CA71BE2B73AEF0857D77811F352C073B6108D72D9810A30914DFF4:555FC3F34BDD2D54C62D9E3BF338C1C4:F69F2445DF4F9B17AD2B417BE66C3710:5953ADCE14DB8C7F39F1BD39F359BFFA:0
-
-# For all OFB encrypts and decrypts, the transformed sequence is
-#   CAMELLIA-bits-OFB:key:IV/output':plaintext:ciphertext:encdec
-# OFB-CAMELLIA128.Encrypt 
-CAMELLIA-128-OFB:2B7E151628AED2A6ABF7158809CF4F3C:000102030405060708090A0B0C0D0E0F:6BC1BEE22E409F96E93D7E117393172A:14F7646187817EB586599146B82BD719:1
-CAMELLIA-128-OFB:2B7E151628AED2A6ABF7158809CF4F3C:50FE67CC996D32B6DA0937E99BAFEC60:AE2D8A571E03AC9C9EB76FAC45AF8E51:25623DB569CA51E01482649977E28D84:1
-CAMELLIA-128-OFB:2B7E151628AED2A6ABF7158809CF4F3C:D9A4DADA0892239F6B8B3D7680E15674:30C81C46A35CE411E5FBC1191A0A52EF:C776634A60729DC657D12B9FCA801E98:1
-CAMELLIA-128-OFB:2B7E151628AED2A6ABF7158809CF4F3C:A78819583F0308E7A6BF36B1386ABF23:F69F2445DF4F9B17AD2B417BE66C3710:D776379BE0E50825E681DA1A4C980E8E:1
-
-# OFB-CAMELLIA128.Decrypt 
-CAMELLIA-128-OFB:2B7E151628AED2A6ABF7158809CF4F3C:000102030405060708090A0B0C0D0E0F:6BC1BEE22E409F96E93D7E117393172A:14F7646187817EB586599146B82BD719:0
-CAMELLIA-128-OFB:2B7E151628AED2A6ABF7158809CF4F3C:50FE67CC996D32B6DA0937E99BAFEC60:AE2D8A571E03AC9C9EB76FAC45AF8E51:25623DB569CA51E01482649977E28D84:0
-CAMELLIA-128-OFB:2B7E151628AED2A6ABF7158809CF4F3C:D9A4DADA0892239F6B8B3D7680E15674:30C81C46A35CE411E5FBC1191A0A52EF:C776634A60729DC657D12B9FCA801E98:0
-CAMELLIA-128-OFB:2B7E151628AED2A6ABF7158809CF4F3C:A78819583F0308E7A6BF36B1386ABF23:F69F2445DF4F9B17AD2B417BE66C3710:D776379BE0E50825E681DA1A4C980E8E:0
-
-# OFB-CAMELLIA192.Encrypt 
-CAMELLIA-192-OFB:8E73B0F7DA0E6452C810F32B809079E562F8EAD2522C6B7B:000102030405060708090A0B0C0D0E0F:6BC1BEE22E409F96E93D7E117393172A:C832BB9780677DAA82D9B6860DCD565E:1
-CAMELLIA-192-OFB:8E73B0F7DA0E6452C810F32B809079E562F8EAD2522C6B7B:A609B38DF3B1133DDDFF2718BA09565E:AE2D8A571E03AC9C9EB76FAC45AF8E51:8ECEB7D0350D72C7F78562AEBDF99339:1
-CAMELLIA-192-OFB:8E73B0F7DA0E6452C810F32B809079E562F8EAD2522C6B7B:52EF01DA52602FE0975F78AC84BF8A50:30C81C46A35CE411E5FBC1191A0A52EF:BDD62DBBB9700846C53B507F544696F0:1
-CAMELLIA-192-OFB:8E73B0F7DA0E6452C810F32B809079E562F8EAD2522C6B7B:BD5286AC63AABD7EB067AC54B553F71D:F69F2445DF4F9B17AD2B417BE66C3710:E28014E046B802F385C4C2E13EAD4A72:1
-
-# OFB-CAMELLIA192.Decrypt 
-CAMELLIA-192-OFB:8E73B0F7DA0E6452C810F32B809079E562F8EAD2522C6B7B:000102030405060708090A0B0C0D0E0F:6BC1BEE22E409F96E93D7E117393172A:C832BB9780677DAA82D9B6860DCD565E:0
-CAMELLIA-192-OFB:8E73B0F7DA0E6452C810F32B809079E562F8EAD2522C6B7B:A609B38DF3B1133DDDFF2718BA09565E:AE2D8A571E03AC9C9EB76FAC45AF8E51:8ECEB7D0350D72C7F78562AEBDF99339:0
-CAMELLIA-192-OFB:8E73B0F7DA0E6452C810F32B809079E562F8EAD2522C6B7B:52EF01DA52602FE0975F78AC84BF8A50:30C81C46A35CE411E5FBC1191A0A52EF:BDD62DBBB9700846C53B507F544696F0:0
-CAMELLIA-192-OFB:8E73B0F7DA0E6452C810F32B809079E562F8EAD2522C6B7B:BD5286AC63AABD7EB067AC54B553F71D:F69F2445DF4F9B17AD2B417BE66C3710:E28014E046B802F385C4C2E13EAD4A72:0
-
-# OFB-CAMELLIA256.Encrypt 
-CAMELLIA-256-OFB:603DEB1015CA71BE2B73AEF0857D77811F352C073B6108D72D9810A30914DFF4:000102030405060708090A0B0C0D0E0F:6BC1BEE22E409F96E93D7E117393172A:CF6107BB0CEA7D7FB1BD31F5E7B06C93:1
-CAMELLIA-256-OFB:603DEB1015CA71BE2B73AEF0857D77811F352C073B6108D72D9810A30914DFF4:B7BF3A5DF43989DD97F0FA97EBCE2F4A:AE2D8A571E03AC9C9EB76FAC45AF8E51:127AD97E8E3994E4820027D7BA109368:1
-CAMELLIA-256-OFB:603DEB1015CA71BE2B73AEF0857D77811F352C073B6108D72D9810A30914DFF4:E1C656305ED1A7A6563805746FE03EDC:30C81C46A35CE411E5FBC1191A0A52EF:6BFF6265A6A6B7A535BC65A80B17214E:1
-CAMELLIA-256-OFB:603DEB1015CA71BE2B73AEF0857D77811F352C073B6108D72D9810A30914DFF4:41635BE625B48AFC1666DD42A09D96E7:F69F2445DF4F9B17AD2B417BE66C3710:0A4A0404E26AA78A27CB271E8BF3CF20:1
-
-# OFB-CAMELLIA256.Decrypt 
-CAMELLIA-256-OFB:603DEB1015CA71BE2B73AEF0857D77811F352C073B6108D72D9810A30914DFF4:000102030405060708090A0B0C0D0E0F:6BC1BEE22E409F96E93D7E117393172A:CF6107BB0CEA7D7FB1BD31F5E7B06C93:0
-CAMELLIA-256-OFB:603DEB1015CA71BE2B73AEF0857D77811F352C073B6108D72D9810A30914DFF4:B7BF3A5DF43989DD97F0FA97EBCE2F4A:AE2D8A571E03AC9C9EB76FAC45AF8E51:127AD97E8E3994E4820027D7BA109368:0
-CAMELLIA-256-OFB:603DEB1015CA71BE2B73AEF0857D77811F352C073B6108D72D9810A30914DFF4:E1C656305ED1A7A6563805746FE03EDC:30C81C46A35CE411E5FBC1191A0A52EF:6BFF6265A6A6B7A535BC65A80B17214E:0
-CAMELLIA-256-OFB:603DEB1015CA71BE2B73AEF0857D77811F352C073B6108D72D9810A30914DFF4:41635BE625B48AFC1666DD42A09D96E7:F69F2445DF4F9B17AD2B417BE66C3710:0A4A0404E26AA78A27CB271E8BF3CF20:0
-
diff --git a/crypto/openssl/crypto/evp/m_dss.c b/crypto/openssl/crypto/evp/m_dss.c
deleted file mode 100644
index a948c77fa497..000000000000
--- a/crypto/openssl/crypto/evp/m_dss.c
+++ /dev/null
@@ -1,99 +0,0 @@
-/* crypto/evp/m_dss.c */
-/* Copyright (C) 1995-1998 Eric Young (eay@cryptsoft.com)
- * All rights reserved.
- *
- * This package is an SSL implementation written
- * by Eric Young (eay@cryptsoft.com).
- * The implementation was written so as to conform with Netscapes SSL.
- * 
- * This library is free for commercial and non-commercial use as long as
- * the following conditions are aheared to.  The following conditions
- * apply to all code found in this distribution, be it the RC4, RSA,
- * lhash, DES, etc., code; not just the SSL code.  The SSL documentation
- * included with this distribution is covered by the same copyright terms
- * except that the holder is Tim Hudson (tjh@cryptsoft.com).
- * 
- * Copyright remains Eric Young's, and as such any Copyright notices in
- * the code are not to be removed.
- * If this package is used in a product, Eric Young should be given attribution
- * as the author of the parts of the library used.
- * This can be in the form of a textual message at program startup or
- * in documentation (online or textual) provided with the package.
- * 
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions
- * are met:
- * 1. Redistributions of source code must retain the copyright
- *    notice, this list of conditions and the following disclaimer.
- * 2. Redistributions in binary form must reproduce the above copyright
- *    notice, this list of conditions and the following disclaimer in the
- *    documentation and/or other materials provided with the distribution.
- * 3. All advertising materials mentioning features or use of this software
- *    must display the following acknowledgement:
- *    "This product includes cryptographic software written by
- *     Eric Young (eay@cryptsoft.com)"
- *    The word 'cryptographic' can be left out if the rouines from the library
- *    being used are not cryptographic related :-).
- * 4. If you include any Windows specific code (or a derivative thereof) from 
- *    the apps directory (application code) you must include an acknowledgement:
- *    "This product includes software written by Tim Hudson (tjh@cryptsoft.com)"
- * 
- * THIS SOFTWARE IS PROVIDED BY ERIC YOUNG ``AS IS'' AND
- * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
- * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
- * ARE DISCLAIMED.  IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE
- * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
- * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
- * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
- * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
- * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
- * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
- * SUCH DAMAGE.
- * 
- * The licence and distribution terms for any publically available version or
- * derivative of this code cannot be changed.  i.e. this code cannot simply be
- * copied and put under another distribution licence
- * [including the GNU Public Licence.]
- */
-
-#include <stdio.h>
-#include "cryptlib.h"
-#include <openssl/evp.h>
-#include <openssl/objects.h>
-#include <openssl/x509.h>
-#ifndef OPENSSL_NO_DSA
-#include <openssl/dsa.h>
-#endif
-
-#ifndef OPENSSL_NO_SHA
-
-static int init(EVP_MD_CTX *ctx)
-	{ return SHA1_Init(ctx->md_data); }
-
-static int update(EVP_MD_CTX *ctx,const void *data,size_t count)
-	{ return SHA1_Update(ctx->md_data,data,count); }
-
-static int final(EVP_MD_CTX *ctx,unsigned char *md)
-	{ return SHA1_Final(md,ctx->md_data); }
-
-static const EVP_MD dsa_md=
-	{
-	NID_dsaWithSHA,
-	NID_dsaWithSHA,
-	SHA_DIGEST_LENGTH,
-	0,
-	init,
-	update,
-	final,
-	NULL,
-	NULL,
-	EVP_PKEY_DSA_method,
-	SHA_CBLOCK,
-	sizeof(EVP_MD *)+sizeof(SHA_CTX),
-	};
-
-const EVP_MD *EVP_dss(void)
-	{
-	return(&dsa_md);
-	}
-#endif
diff --git a/crypto/openssl/crypto/evp/m_dss1.c b/crypto/openssl/crypto/evp/m_dss1.c
deleted file mode 100644
index c12e13972b50..000000000000
--- a/crypto/openssl/crypto/evp/m_dss1.c
+++ /dev/null
@@ -1,100 +0,0 @@
-/* crypto/evp/m_dss1.c */
-/* Copyright (C) 1995-1998 Eric Young (eay@cryptsoft.com)
- * All rights reserved.
- *
- * This package is an SSL implementation written
- * by Eric Young (eay@cryptsoft.com).
- * The implementation was written so as to conform with Netscapes SSL.
- * 
- * This library is free for commercial and non-commercial use as long as
- * the following conditions are aheared to.  The following conditions
- * apply to all code found in this distribution, be it the RC4, RSA,
- * lhash, DES, etc., code; not just the SSL code.  The SSL documentation
- * included with this distribution is covered by the same copyright terms
- * except that the holder is Tim Hudson (tjh@cryptsoft.com).
- * 
- * Copyright remains Eric Young's, and as such any Copyright notices in
- * the code are not to be removed.
- * If this package is used in a product, Eric Young should be given attribution
- * as the author of the parts of the library used.
- * This can be in the form of a textual message at program startup or
- * in documentation (online or textual) provided with the package.
- * 
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions
- * are met:
- * 1. Redistributions of source code must retain the copyright
- *    notice, this list of conditions and the following disclaimer.
- * 2. Redistributions in binary form must reproduce the above copyright
- *    notice, this list of conditions and the following disclaimer in the
- *    documentation and/or other materials provided with the distribution.
- * 3. All advertising materials mentioning features or use of this software
- *    must display the following acknowledgement:
- *    "This product includes cryptographic software written by
- *     Eric Young (eay@cryptsoft.com)"
- *    The word 'cryptographic' can be left out if the rouines from the library
- *    being used are not cryptographic related :-).
- * 4. If you include any Windows specific code (or a derivative thereof) from 
- *    the apps directory (application code) you must include an acknowledgement:
- *    "This product includes software written by Tim Hudson (tjh@cryptsoft.com)"
- * 
- * THIS SOFTWARE IS PROVIDED BY ERIC YOUNG ``AS IS'' AND
- * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
- * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
- * ARE DISCLAIMED.  IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE
- * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
- * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
- * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
- * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
- * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
- * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
- * SUCH DAMAGE.
- * 
- * The licence and distribution terms for any publically available version or
- * derivative of this code cannot be changed.  i.e. this code cannot simply be
- * copied and put under another distribution licence
- * [including the GNU Public Licence.]
- */
-
-#include <stdio.h>
-#include "cryptlib.h"
-
-#ifndef OPENSSL_NO_SHA
-
-#include <openssl/evp.h>
-#include <openssl/objects.h>
-#include <openssl/x509.h>
-#ifndef OPENSSL_NO_DSA
-#include <openssl/dsa.h>
-#endif
-
-static int init(EVP_MD_CTX *ctx)
-	{ return SHA1_Init(ctx->md_data); }
-
-static int update(EVP_MD_CTX *ctx,const void *data,size_t count)
-	{ return SHA1_Update(ctx->md_data,data,count); }
-
-static int final(EVP_MD_CTX *ctx,unsigned char *md)
-	{ return SHA1_Final(md,ctx->md_data); }
-
-static const EVP_MD dss1_md=
-	{
-	NID_dsa,
-	NID_dsaWithSHA1,
-	SHA_DIGEST_LENGTH,
-	0,
-	init,
-	update,
-	final,
-	NULL,
-	NULL,
-	EVP_PKEY_DSA_method,
-	SHA_CBLOCK,
-	sizeof(EVP_MD *)+sizeof(SHA_CTX),
-	};
-
-const EVP_MD *EVP_dss1(void)
-	{
-	return(&dss1_md);
-	}
-#endif
diff --git a/crypto/openssl/crypto/evp/m_ecdsa.c b/crypto/openssl/crypto/evp/m_ecdsa.c
deleted file mode 100644
index fad270faca2b..000000000000
--- a/crypto/openssl/crypto/evp/m_ecdsa.c
+++ /dev/null
@@ -1,148 +0,0 @@
-/* crypto/evp/m_ecdsa.c */
-/* ====================================================================
- * Copyright (c) 1998-2002 The OpenSSL Project.  All rights reserved.
- *
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions
- * are met:
- *
- * 1. Redistributions of source code must retain the above copyright
- *    notice, this list of conditions and the following disclaimer. 
- *
- * 2. Redistributions in binary form must reproduce the above copyright
- *    notice, this list of conditions and the following disclaimer in
- *    the documentation and/or other materials provided with the
- *    distribution.
- *
- * 3. All advertising materials mentioning features or use of this
- *    software must display the following acknowledgment:
- *    "This product includes software developed by the OpenSSL Project
- *    for use in the OpenSSL Toolkit. (http://www.openssl.org/)"
- *
- * 4. The names "OpenSSL Toolkit" and "OpenSSL Project" must not be used to
- *    endorse or promote products derived from this software without
- *    prior written permission. For written permission, please contact
- *    openssl-core@openssl.org.
- *
- * 5. Products derived from this software may not be called "OpenSSL"
- *    nor may "OpenSSL" appear in their names without prior written
- *    permission of the OpenSSL Project.
- *
- * 6. Redistributions of any form whatsoever must retain the following
- *    acknowledgment:
- *    "This product includes software developed by the OpenSSL Project
- *    for use in the OpenSSL Toolkit (http://www.openssl.org/)"
- *
- * THIS SOFTWARE IS PROVIDED BY THE OpenSSL PROJECT ``AS IS'' AND ANY
- * EXPRESSED OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
- * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR
- * PURPOSE ARE DISCLAIMED.  IN NO EVENT SHALL THE OpenSSL PROJECT OR
- * ITS CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
- * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
- * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
- * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
- * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
- * STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
- * ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED
- * OF THE POSSIBILITY OF SUCH DAMAGE.
- * ====================================================================
- *
- * This product includes cryptographic software written by Eric Young
- * (eay@cryptsoft.com).  This product includes software written by Tim
- * Hudson (tjh@cryptsoft.com).
- *
- */
-/* Copyright (C) 1995-1998 Eric Young (eay@cryptsoft.com)
- * All rights reserved.
- *
- * This package is an SSL implementation written
- * by Eric Young (eay@cryptsoft.com).
- * The implementation was written so as to conform with Netscapes SSL.
- * 
- * This library is free for commercial and non-commercial use as long as
- * the following conditions are aheared to.  The following conditions
- * apply to all code found in this distribution, be it the RC4, RSA,
- * lhash, DES, etc., code; not just the SSL code.  The SSL documentation
- * included with this distribution is covered by the same copyright terms
- * except that the holder is Tim Hudson (tjh@cryptsoft.com).
- * 
- * Copyright remains Eric Young's, and as such any Copyright notices in
- * the code are not to be removed.
- * If this package is used in a product, Eric Young should be given attribution
- * as the author of the parts of the library used.
- * This can be in the form of a textual message at program startup or
- * in documentation (online or textual) provided with the package.
- * 
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions
- * are met:
- * 1. Redistributions of source code must retain the copyright
- *    notice, this list of conditions and the following disclaimer.
- * 2. Redistributions in binary form must reproduce the above copyright
- *    notice, this list of conditions and the following disclaimer in the
- *    documentation and/or other materials provided with the distribution.
- * 3. All advertising materials mentioning features or use of this software
- *    must display the following acknowledgement:
- *    "This product includes cryptographic software written by
- *     Eric Young (eay@cryptsoft.com)"
- *    The word 'cryptographic' can be left out if the rouines from the library
- *    being used are not cryptographic related :-).
- * 4. If you include any Windows specific code (or a derivative thereof) from 
- *    the apps directory (application code) you must include an acknowledgement:
- *    "This product includes software written by Tim Hudson (tjh@cryptsoft.com)"
- * 
- * THIS SOFTWARE IS PROVIDED BY ERIC YOUNG ``AS IS'' AND
- * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
- * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
- * ARE DISCLAIMED.  IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE
- * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
- * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
- * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
- * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
- * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
- * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
- * SUCH DAMAGE.
- * 
- * The licence and distribution terms for any publically available version or
- * derivative of this code cannot be changed.  i.e. this code cannot simply be
- * copied and put under another distribution licence
- * [including the GNU Public Licence.]
- */
-
-#include <stdio.h>
-#include "cryptlib.h"
-#include <openssl/evp.h>
-#include <openssl/objects.h>
-#include <openssl/x509.h>
-
-#ifndef OPENSSL_NO_SHA
-static int init(EVP_MD_CTX *ctx)
-	{ return SHA1_Init(ctx->md_data); }
-
-static int update(EVP_MD_CTX *ctx,const void *data,size_t count)
-	{ return SHA1_Update(ctx->md_data,data,count); }
-
-static int final(EVP_MD_CTX *ctx,unsigned char *md)
-	{ return SHA1_Final(md,ctx->md_data); }
-
-static const EVP_MD ecdsa_md=
-	{
-	NID_ecdsa_with_SHA1,
-	NID_ecdsa_with_SHA1,
-	SHA_DIGEST_LENGTH,
-	0,
-	init,
-	update,
-	final,
-	NULL,
-	NULL,
-	EVP_PKEY_ECDSA_method,
-	SHA_CBLOCK,
-	sizeof(EVP_MD *)+sizeof(SHA_CTX),
-	};
-
-const EVP_MD *EVP_ecdsa(void)
-	{
-	return(&ecdsa_md);
-	}
-#endif
diff --git a/crypto/openssl/crypto/evp/m_md2.c b/crypto/openssl/crypto/evp/m_md2.c
deleted file mode 100644
index 5ce849f161dd..000000000000
--- a/crypto/openssl/crypto/evp/m_md2.c
+++ /dev/null
@@ -1,101 +0,0 @@
-/* crypto/evp/m_md2.c */
-/* Copyright (C) 1995-1998 Eric Young (eay@cryptsoft.com)
- * All rights reserved.
- *
- * This package is an SSL implementation written
- * by Eric Young (eay@cryptsoft.com).
- * The implementation was written so as to conform with Netscapes SSL.
- * 
- * This library is free for commercial and non-commercial use as long as
- * the following conditions are aheared to.  The following conditions
- * apply to all code found in this distribution, be it the RC4, RSA,
- * lhash, DES, etc., code; not just the SSL code.  The SSL documentation
- * included with this distribution is covered by the same copyright terms
- * except that the holder is Tim Hudson (tjh@cryptsoft.com).
- * 
- * Copyright remains Eric Young's, and as such any Copyright notices in
- * the code are not to be removed.
- * If this package is used in a product, Eric Young should be given attribution
- * as the author of the parts of the library used.
- * This can be in the form of a textual message at program startup or
- * in documentation (online or textual) provided with the package.
- * 
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions
- * are met:
- * 1. Redistributions of source code must retain the copyright
- *    notice, this list of conditions and the following disclaimer.
- * 2. Redistributions in binary form must reproduce the above copyright
- *    notice, this list of conditions and the following disclaimer in the
- *    documentation and/or other materials provided with the distribution.
- * 3. All advertising materials mentioning features or use of this software
- *    must display the following acknowledgement:
- *    "This product includes cryptographic software written by
- *     Eric Young (eay@cryptsoft.com)"
- *    The word 'cryptographic' can be left out if the rouines from the library
- *    being used are not cryptographic related :-).
- * 4. If you include any Windows specific code (or a derivative thereof) from 
- *    the apps directory (application code) you must include an acknowledgement:
- *    "This product includes software written by Tim Hudson (tjh@cryptsoft.com)"
- * 
- * THIS SOFTWARE IS PROVIDED BY ERIC YOUNG ``AS IS'' AND
- * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
- * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
- * ARE DISCLAIMED.  IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE
- * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
- * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
- * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
- * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
- * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
- * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
- * SUCH DAMAGE.
- * 
- * The licence and distribution terms for any publically available version or
- * derivative of this code cannot be changed.  i.e. this code cannot simply be
- * copied and put under another distribution licence
- * [including the GNU Public Licence.]
- */
-
-#include <stdio.h>
-#include "cryptlib.h"
-
-#ifndef OPENSSL_NO_MD2
-
-#include <openssl/evp.h>
-#include <openssl/objects.h>
-#include <openssl/x509.h>
-#include <openssl/md2.h>
-#ifndef OPENSSL_NO_RSA
-#include <openssl/rsa.h>
-#endif
-
-static int init(EVP_MD_CTX *ctx)
-	{ return MD2_Init(ctx->md_data); }
-
-static int update(EVP_MD_CTX *ctx,const void *data,size_t count)
-	{ return MD2_Update(ctx->md_data,data,count); }
-
-static int final(EVP_MD_CTX *ctx,unsigned char *md)
-	{ return MD2_Final(md,ctx->md_data); }
-
-static const EVP_MD md2_md=
-	{
-	NID_md2,
-	NID_md2WithRSAEncryption,
-	MD2_DIGEST_LENGTH,
-	0,
-	init,
-	update,
-	final,
-	NULL,
-	NULL,
-	EVP_PKEY_RSA_method,
-	MD2_BLOCK,
-	sizeof(EVP_MD *)+sizeof(MD2_CTX),
-	};
-
-const EVP_MD *EVP_md2(void)
-	{
-	return(&md2_md);
-	}
-#endif
diff --git a/crypto/openssl/crypto/evp/m_md4.c b/crypto/openssl/crypto/evp/m_md4.c
deleted file mode 100644
index 1e0b7c5b424e..000000000000
--- a/crypto/openssl/crypto/evp/m_md4.c
+++ /dev/null
@@ -1,101 +0,0 @@
-/* crypto/evp/m_md4.c */
-/* Copyright (C) 1995-1998 Eric Young (eay@cryptsoft.com)
- * All rights reserved.
- *
- * This package is an SSL implementation written
- * by Eric Young (eay@cryptsoft.com).
- * The implementation was written so as to conform with Netscapes SSL.
- * 
- * This library is free for commercial and non-commercial use as long as
- * the following conditions are aheared to.  The following conditions
- * apply to all code found in this distribution, be it the RC4, RSA,
- * lhash, DES, etc., code; not just the SSL code.  The SSL documentation
- * included with this distribution is covered by the same copyright terms
- * except that the holder is Tim Hudson (tjh@cryptsoft.com).
- * 
- * Copyright remains Eric Young's, and as such any Copyright notices in
- * the code are not to be removed.
- * If this package is used in a product, Eric Young should be given attribution
- * as the author of the parts of the library used.
- * This can be in the form of a textual message at program startup or
- * in documentation (online or textual) provided with the package.
- * 
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions
- * are met:
- * 1. Redistributions of source code must retain the copyright
- *    notice, this list of conditions and the following disclaimer.
- * 2. Redistributions in binary form must reproduce the above copyright
- *    notice, this list of conditions and the following disclaimer in the
- *    documentation and/or other materials provided with the distribution.
- * 3. All advertising materials mentioning features or use of this software
- *    must display the following acknowledgement:
- *    "This product includes cryptographic software written by
- *     Eric Young (eay@cryptsoft.com)"
- *    The word 'cryptographic' can be left out if the rouines from the library
- *    being used are not cryptographic related :-).
- * 4. If you include any Windows specific code (or a derivative thereof) from 
- *    the apps directory (application code) you must include an acknowledgement:
- *    "This product includes software written by Tim Hudson (tjh@cryptsoft.com)"
- * 
- * THIS SOFTWARE IS PROVIDED BY ERIC YOUNG ``AS IS'' AND
- * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
- * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
- * ARE DISCLAIMED.  IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE
- * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
- * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
- * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
- * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
- * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
- * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
- * SUCH DAMAGE.
- * 
- * The licence and distribution terms for any publically available version or
- * derivative of this code cannot be changed.  i.e. this code cannot simply be
- * copied and put under another distribution licence
- * [including the GNU Public Licence.]
- */
-
-#include <stdio.h>
-#include "cryptlib.h"
-
-#ifndef OPENSSL_NO_MD4
-
-#include <openssl/evp.h>
-#include <openssl/objects.h>
-#include <openssl/x509.h>
-#include <openssl/md4.h>
-#ifndef OPENSSL_NO_RSA
-#include <openssl/rsa.h>
-#endif
-
-static int init(EVP_MD_CTX *ctx)
-	{ return MD4_Init(ctx->md_data); }
-
-static int update(EVP_MD_CTX *ctx,const void *data,size_t count)
-	{ return MD4_Update(ctx->md_data,data,count); }
-
-static int final(EVP_MD_CTX *ctx,unsigned char *md)
-	{ return MD4_Final(md,ctx->md_data); }
-
-static const EVP_MD md4_md=
-	{
-	NID_md4,
-	NID_md4WithRSAEncryption,
-	MD4_DIGEST_LENGTH,
-	0,
-	init,
-	update,
-	final,
-	NULL,
-	NULL,
-	EVP_PKEY_RSA_method,
-	MD4_CBLOCK,
-	sizeof(EVP_MD *)+sizeof(MD4_CTX),
-	};
-
-const EVP_MD *EVP_md4(void)
-	{
-	return(&md4_md);
-	}
-#endif
diff --git a/crypto/openssl/crypto/evp/m_md5.c b/crypto/openssl/crypto/evp/m_md5.c
deleted file mode 100644
index 63c142119ebd..000000000000
--- a/crypto/openssl/crypto/evp/m_md5.c
+++ /dev/null
@@ -1,101 +0,0 @@
-/* crypto/evp/m_md5.c */
-/* Copyright (C) 1995-1998 Eric Young (eay@cryptsoft.com)
- * All rights reserved.
- *
- * This package is an SSL implementation written
- * by Eric Young (eay@cryptsoft.com).
- * The implementation was written so as to conform with Netscapes SSL.
- * 
- * This library is free for commercial and non-commercial use as long as
- * the following conditions are aheared to.  The following conditions
- * apply to all code found in this distribution, be it the RC4, RSA,
- * lhash, DES, etc., code; not just the SSL code.  The SSL documentation
- * included with this distribution is covered by the same copyright terms
- * except that the holder is Tim Hudson (tjh@cryptsoft.com).
- * 
- * Copyright remains Eric Young's, and as such any Copyright notices in
- * the code are not to be removed.
- * If this package is used in a product, Eric Young should be given attribution
- * as the author of the parts of the library used.
- * This can be in the form of a textual message at program startup or
- * in documentation (online or textual) provided with the package.
- * 
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions
- * are met:
- * 1. Redistributions of source code must retain the copyright
- *    notice, this list of conditions and the following disclaimer.
- * 2. Redistributions in binary form must reproduce the above copyright
- *    notice, this list of conditions and the following disclaimer in the
- *    documentation and/or other materials provided with the distribution.
- * 3. All advertising materials mentioning features or use of this software
- *    must display the following acknowledgement:
- *    "This product includes cryptographic software written by
- *     Eric Young (eay@cryptsoft.com)"
- *    The word 'cryptographic' can be left out if the rouines from the library
- *    being used are not cryptographic related :-).
- * 4. If you include any Windows specific code (or a derivative thereof) from 
- *    the apps directory (application code) you must include an acknowledgement:
- *    "This product includes software written by Tim Hudson (tjh@cryptsoft.com)"
- * 
- * THIS SOFTWARE IS PROVIDED BY ERIC YOUNG ``AS IS'' AND
- * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
- * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
- * ARE DISCLAIMED.  IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE
- * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
- * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
- * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
- * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
- * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
- * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
- * SUCH DAMAGE.
- * 
- * The licence and distribution terms for any publically available version or
- * derivative of this code cannot be changed.  i.e. this code cannot simply be
- * copied and put under another distribution licence
- * [including the GNU Public Licence.]
- */
-
-#include <stdio.h>
-#include "cryptlib.h"
-
-#ifndef OPENSSL_NO_MD5
-
-#include <openssl/evp.h>
-#include <openssl/objects.h>
-#include <openssl/x509.h>
-#include <openssl/md5.h>
-#ifndef OPENSSL_NO_RSA
-#include <openssl/rsa.h>
-#endif
-
-static int init(EVP_MD_CTX *ctx)
-	{ return MD5_Init(ctx->md_data); }
-
-static int update(EVP_MD_CTX *ctx,const void *data,size_t count)
-	{ return MD5_Update(ctx->md_data,data,count); }
-
-static int final(EVP_MD_CTX *ctx,unsigned char *md)
-	{ return MD5_Final(md,ctx->md_data); }
-
-static const EVP_MD md5_md=
-	{
-	NID_md5,
-	NID_md5WithRSAEncryption,
-	MD5_DIGEST_LENGTH,
-	0,
-	init,
-	update,
-	final,
-	NULL,
-	NULL,
-	EVP_PKEY_RSA_method,
-	MD5_CBLOCK,
-	sizeof(EVP_MD *)+sizeof(MD5_CTX),
-	};
-
-const EVP_MD *EVP_md5(void)
-	{
-	return(&md5_md);
-	}
-#endif
diff --git a/crypto/openssl/crypto/evp/m_mdc2.c b/crypto/openssl/crypto/evp/m_mdc2.c
deleted file mode 100644
index 36c4e9b13436..000000000000
--- a/crypto/openssl/crypto/evp/m_mdc2.c
+++ /dev/null
@@ -1,99 +0,0 @@
-/* crypto/evp/m_mdc2.c */
-/* Copyright (C) 1995-1998 Eric Young (eay@cryptsoft.com)
- * All rights reserved.
- *
- * This package is an SSL implementation written
- * by Eric Young (eay@cryptsoft.com).
- * The implementation was written so as to conform with Netscapes SSL.
- * 
- * This library is free for commercial and non-commercial use as long as
- * the following conditions are aheared to.  The following conditions
- * apply to all code found in this distribution, be it the RC4, RSA,
- * lhash, DES, etc., code; not just the SSL code.  The SSL documentation
- * included with this distribution is covered by the same copyright terms
- * except that the holder is Tim Hudson (tjh@cryptsoft.com).
- * 
- * Copyright remains Eric Young's, and as such any Copyright notices in
- * the code are not to be removed.
- * If this package is used in a product, Eric Young should be given attribution
- * as the author of the parts of the library used.
- * This can be in the form of a textual message at program startup or
- * in documentation (online or textual) provided with the package.
- * 
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions
- * are met:
- * 1. Redistributions of source code must retain the copyright
- *    notice, this list of conditions and the following disclaimer.
- * 2. Redistributions in binary form must reproduce the above copyright
- *    notice, this list of conditions and the following disclaimer in the
- *    documentation and/or other materials provided with the distribution.
- * 3. All advertising materials mentioning features or use of this software
- *    must display the following acknowledgement:
- *    "This product includes cryptographic software written by
- *     Eric Young (eay@cryptsoft.com)"
- *    The word 'cryptographic' can be left out if the rouines from the library
- *    being used are not cryptographic related :-).
- * 4. If you include any Windows specific code (or a derivative thereof) from 
- *    the apps directory (application code) you must include an acknowledgement:
- *    "This product includes software written by Tim Hudson (tjh@cryptsoft.com)"
- * 
- * THIS SOFTWARE IS PROVIDED BY ERIC YOUNG ``AS IS'' AND
- * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
- * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
- * ARE DISCLAIMED.  IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE
- * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
- * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
- * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
- * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
- * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
- * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
- * SUCH DAMAGE.
- * 
- * The licence and distribution terms for any publically available version or
- * derivative of this code cannot be changed.  i.e. this code cannot simply be
- * copied and put under another distribution licence
- * [including the GNU Public Licence.]
- */
-
-#include <stdio.h>
-#include "cryptlib.h"
-
-#ifndef OPENSSL_NO_MDC2
-
-#include <openssl/evp.h>
-#include <openssl/objects.h>
-#include <openssl/x509.h>
-#include <openssl/mdc2.h>
-#include <openssl/rsa.h>
-
-static int init(EVP_MD_CTX *ctx)
-	{ return MDC2_Init(ctx->md_data); }
-
-static int update(EVP_MD_CTX *ctx,const void *data,size_t count)
-	{ return MDC2_Update(ctx->md_data,data,count); }
-
-static int final(EVP_MD_CTX *ctx,unsigned char *md)
-	{ return MDC2_Final(md,ctx->md_data); }
-
-static const EVP_MD mdc2_md=
-	{
-	NID_mdc2,
-	NID_mdc2WithRSA,
-	MDC2_DIGEST_LENGTH,
-	0,
-	init,
-	update,
-	final,
-	NULL,
-	NULL,
-	EVP_PKEY_RSA_ASN1_OCTET_STRING_method,
-	MDC2_BLOCK,
-	sizeof(EVP_MD *)+sizeof(MDC2_CTX),
-	};
-
-const EVP_MD *EVP_mdc2(void)
-	{
-	return(&mdc2_md);
-	}
-#endif
diff --git a/crypto/openssl/crypto/evp/m_null.c b/crypto/openssl/crypto/evp/m_null.c
deleted file mode 100644
index cb0721699dba..000000000000
--- a/crypto/openssl/crypto/evp/m_null.c
+++ /dev/null
@@ -1,95 +0,0 @@
-/* crypto/evp/m_null.c */
-/* Copyright (C) 1995-1998 Eric Young (eay@cryptsoft.com)
- * All rights reserved.
- *
- * This package is an SSL implementation written
- * by Eric Young (eay@cryptsoft.com).
- * The implementation was written so as to conform with Netscapes SSL.
- * 
- * This library is free for commercial and non-commercial use as long as
- * the following conditions are aheared to.  The following conditions
- * apply to all code found in this distribution, be it the RC4, RSA,
- * lhash, DES, etc., code; not just the SSL code.  The SSL documentation
- * included with this distribution is covered by the same copyright terms
- * except that the holder is Tim Hudson (tjh@cryptsoft.com).
- * 
- * Copyright remains Eric Young's, and as such any Copyright notices in
- * the code are not to be removed.
- * If this package is used in a product, Eric Young should be given attribution
- * as the author of the parts of the library used.
- * This can be in the form of a textual message at program startup or
- * in documentation (online or textual) provided with the package.
- * 
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions
- * are met:
- * 1. Redistributions of source code must retain the copyright
- *    notice, this list of conditions and the following disclaimer.
- * 2. Redistributions in binary form must reproduce the above copyright
- *    notice, this list of conditions and the following disclaimer in the
- *    documentation and/or other materials provided with the distribution.
- * 3. All advertising materials mentioning features or use of this software
- *    must display the following acknowledgement:
- *    "This product includes cryptographic software written by
- *     Eric Young (eay@cryptsoft.com)"
- *    The word 'cryptographic' can be left out if the rouines from the library
- *    being used are not cryptographic related :-).
- * 4. If you include any Windows specific code (or a derivative thereof) from 
- *    the apps directory (application code) you must include an acknowledgement:
- *    "This product includes software written by Tim Hudson (tjh@cryptsoft.com)"
- * 
- * THIS SOFTWARE IS PROVIDED BY ERIC YOUNG ``AS IS'' AND
- * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
- * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
- * ARE DISCLAIMED.  IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE
- * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
- * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
- * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
- * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
- * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
- * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
- * SUCH DAMAGE.
- * 
- * The licence and distribution terms for any publically available version or
- * derivative of this code cannot be changed.  i.e. this code cannot simply be
- * copied and put under another distribution licence
- * [including the GNU Public Licence.]
- */
-
-#include <stdio.h>
-#include "cryptlib.h"
-#include <openssl/evp.h>
-#include <openssl/objects.h>
-#include <openssl/x509.h>
-
-static int init(EVP_MD_CTX *ctx)
-	{ return 1; }
-
-static int update(EVP_MD_CTX *ctx,const void *data,size_t count)
-	{ return 1; }
-
-static int final(EVP_MD_CTX *ctx,unsigned char *md)
-	{ return 1; }
-
-static const EVP_MD null_md=
-	{
-	NID_undef,
-	NID_undef,
-	0,
-	0,
-	init,
-	update,
-	final,
-	NULL,
-	NULL,
-	EVP_PKEY_NULL_method,
-	0,
-	sizeof(EVP_MD *),
-	};
-
-const EVP_MD *EVP_md_null(void)
-	{
-	return(&null_md);
-	}
-
-
diff --git a/crypto/openssl/crypto/evp/m_ripemd.c b/crypto/openssl/crypto/evp/m_ripemd.c
deleted file mode 100644
index a1d60ee78d28..000000000000
--- a/crypto/openssl/crypto/evp/m_ripemd.c
+++ /dev/null
@@ -1,101 +0,0 @@
-/* crypto/evp/m_ripemd.c */
-/* Copyright (C) 1995-1998 Eric Young (eay@cryptsoft.com)
- * All rights reserved.
- *
- * This package is an SSL implementation written
- * by Eric Young (eay@cryptsoft.com).
- * The implementation was written so as to conform with Netscapes SSL.
- * 
- * This library is free for commercial and non-commercial use as long as
- * the following conditions are aheared to.  The following conditions
- * apply to all code found in this distribution, be it the RC4, RSA,
- * lhash, DES, etc., code; not just the SSL code.  The SSL documentation
- * included with this distribution is covered by the same copyright terms
- * except that the holder is Tim Hudson (tjh@cryptsoft.com).
- * 
- * Copyright remains Eric Young's, and as such any Copyright notices in
- * the code are not to be removed.
- * If this package is used in a product, Eric Young should be given attribution
- * as the author of the parts of the library used.
- * This can be in the form of a textual message at program startup or
- * in documentation (online or textual) provided with the package.
- * 
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions
- * are met:
- * 1. Redistributions of source code must retain the copyright
- *    notice, this list of conditions and the following disclaimer.
- * 2. Redistributions in binary form must reproduce the above copyright
- *    notice, this list of conditions and the following disclaimer in the
- *    documentation and/or other materials provided with the distribution.
- * 3. All advertising materials mentioning features or use of this software
- *    must display the following acknowledgement:
- *    "This product includes cryptographic software written by
- *     Eric Young (eay@cryptsoft.com)"
- *    The word 'cryptographic' can be left out if the rouines from the library
- *    being used are not cryptographic related :-).
- * 4. If you include any Windows specific code (or a derivative thereof) from 
- *    the apps directory (application code) you must include an acknowledgement:
- *    "This product includes software written by Tim Hudson (tjh@cryptsoft.com)"
- * 
- * THIS SOFTWARE IS PROVIDED BY ERIC YOUNG ``AS IS'' AND
- * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
- * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
- * ARE DISCLAIMED.  IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE
- * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
- * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
- * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
- * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
- * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
- * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
- * SUCH DAMAGE.
- * 
- * The licence and distribution terms for any publically available version or
- * derivative of this code cannot be changed.  i.e. this code cannot simply be
- * copied and put under another distribution licence
- * [including the GNU Public Licence.]
- */
-
-#include <stdio.h>
-#include "cryptlib.h"
-
-#ifndef OPENSSL_NO_RIPEMD
-
-#include <openssl/ripemd.h>
-#include <openssl/evp.h>
-#include <openssl/objects.h>
-#include <openssl/x509.h>
-#ifndef OPENSSL_NO_RSA
-#include <openssl/rsa.h>
-#endif
-
-static int init(EVP_MD_CTX *ctx)
-	{ return RIPEMD160_Init(ctx->md_data); }
-
-static int update(EVP_MD_CTX *ctx,const void *data,size_t count)
-	{ return RIPEMD160_Update(ctx->md_data,data,count); }
-
-static int final(EVP_MD_CTX *ctx,unsigned char *md)
-	{ return RIPEMD160_Final(md,ctx->md_data); }
-
-static const EVP_MD ripemd160_md=
-	{
-	NID_ripemd160,
-	NID_ripemd160WithRSA,
-	RIPEMD160_DIGEST_LENGTH,
-	0,
-	init,
-	update,
-	final,
-	NULL,
-	NULL,
-	EVP_PKEY_RSA_method,
-	RIPEMD160_CBLOCK,
-	sizeof(EVP_MD *)+sizeof(RIPEMD160_CTX),
-	};
-
-const EVP_MD *EVP_ripemd160(void)
-	{
-	return(&ripemd160_md);
-	}
-#endif
diff --git a/crypto/openssl/crypto/evp/m_sha.c b/crypto/openssl/crypto/evp/m_sha.c
deleted file mode 100644
index acccc8f92d8e..000000000000
--- a/crypto/openssl/crypto/evp/m_sha.c
+++ /dev/null
@@ -1,100 +0,0 @@
-/* crypto/evp/m_sha.c */
-/* Copyright (C) 1995-1998 Eric Young (eay@cryptsoft.com)
- * All rights reserved.
- *
- * This package is an SSL implementation written
- * by Eric Young (eay@cryptsoft.com).
- * The implementation was written so as to conform with Netscapes SSL.
- * 
- * This library is free for commercial and non-commercial use as long as
- * the following conditions are aheared to.  The following conditions
- * apply to all code found in this distribution, be it the RC4, RSA,
- * lhash, DES, etc., code; not just the SSL code.  The SSL documentation
- * included with this distribution is covered by the same copyright terms
- * except that the holder is Tim Hudson (tjh@cryptsoft.com).
- * 
- * Copyright remains Eric Young's, and as such any Copyright notices in
- * the code are not to be removed.
- * If this package is used in a product, Eric Young should be given attribution
- * as the author of the parts of the library used.
- * This can be in the form of a textual message at program startup or
- * in documentation (online or textual) provided with the package.
- * 
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions
- * are met:
- * 1. Redistributions of source code must retain the copyright
- *    notice, this list of conditions and the following disclaimer.
- * 2. Redistributions in binary form must reproduce the above copyright
- *    notice, this list of conditions and the following disclaimer in the
- *    documentation and/or other materials provided with the distribution.
- * 3. All advertising materials mentioning features or use of this software
- *    must display the following acknowledgement:
- *    "This product includes cryptographic software written by
- *     Eric Young (eay@cryptsoft.com)"
- *    The word 'cryptographic' can be left out if the rouines from the library
- *    being used are not cryptographic related :-).
- * 4. If you include any Windows specific code (or a derivative thereof) from 
- *    the apps directory (application code) you must include an acknowledgement:
- *    "This product includes software written by Tim Hudson (tjh@cryptsoft.com)"
- * 
- * THIS SOFTWARE IS PROVIDED BY ERIC YOUNG ``AS IS'' AND
- * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
- * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
- * ARE DISCLAIMED.  IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE
- * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
- * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
- * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
- * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
- * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
- * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
- * SUCH DAMAGE.
- * 
- * The licence and distribution terms for any publically available version or
- * derivative of this code cannot be changed.  i.e. this code cannot simply be
- * copied and put under another distribution licence
- * [including the GNU Public Licence.]
- */
-
-#include <stdio.h>
-#include "cryptlib.h"
-
-#if !defined(OPENSSL_NO_SHA) && !defined(OPENSSL_NO_SHA0)
-
-#include <openssl/evp.h>
-#include <openssl/objects.h>
-#include <openssl/x509.h>
-#ifndef OPENSSL_NO_RSA
-#include <openssl/rsa.h>
-#endif
-
-static int init(EVP_MD_CTX *ctx)
-	{ return SHA_Init(ctx->md_data); }
-
-static int update(EVP_MD_CTX *ctx,const void *data,size_t count)
-	{ return SHA_Update(ctx->md_data,data,count); }
-
-static int final(EVP_MD_CTX *ctx,unsigned char *md)
-	{ return SHA_Final(md,ctx->md_data); }
-
-static const EVP_MD sha_md=
-	{
-	NID_sha,
-	NID_shaWithRSAEncryption,
-	SHA_DIGEST_LENGTH,
-	0,
-	init,
-	update,
-	final,
-	NULL,
-	NULL,
-	EVP_PKEY_RSA_method,
-	SHA_CBLOCK,
-	sizeof(EVP_MD *)+sizeof(SHA_CTX),
-	};
-
-const EVP_MD *EVP_sha(void)
-	{
-	return(&sha_md);
-	}
-#endif
diff --git a/crypto/openssl/crypto/evp/m_sha1.c b/crypto/openssl/crypto/evp/m_sha1.c
deleted file mode 100644
index 4679b1c4638c..000000000000
--- a/crypto/openssl/crypto/evp/m_sha1.c
+++ /dev/null
@@ -1,204 +0,0 @@
-/* crypto/evp/m_sha1.c */
-/* Copyright (C) 1995-1998 Eric Young (eay@cryptsoft.com)
- * All rights reserved.
- *
- * This package is an SSL implementation written
- * by Eric Young (eay@cryptsoft.com).
- * The implementation was written so as to conform with Netscapes SSL.
- * 
- * This library is free for commercial and non-commercial use as long as
- * the following conditions are aheared to.  The following conditions
- * apply to all code found in this distribution, be it the RC4, RSA,
- * lhash, DES, etc., code; not just the SSL code.  The SSL documentation
- * included with this distribution is covered by the same copyright terms
- * except that the holder is Tim Hudson (tjh@cryptsoft.com).
- * 
- * Copyright remains Eric Young's, and as such any Copyright notices in
- * the code are not to be removed.
- * If this package is used in a product, Eric Young should be given attribution
- * as the author of the parts of the library used.
- * This can be in the form of a textual message at program startup or
- * in documentation (online or textual) provided with the package.
- * 
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions
- * are met:
- * 1. Redistributions of source code must retain the copyright
- *    notice, this list of conditions and the following disclaimer.
- * 2. Redistributions in binary form must reproduce the above copyright
- *    notice, this list of conditions and the following disclaimer in the
- *    documentation and/or other materials provided with the distribution.
- * 3. All advertising materials mentioning features or use of this software
- *    must display the following acknowledgement:
- *    "This product includes cryptographic software written by
- *     Eric Young (eay@cryptsoft.com)"
- *    The word 'cryptographic' can be left out if the rouines from the library
- *    being used are not cryptographic related :-).
- * 4. If you include any Windows specific code (or a derivative thereof) from 
- *    the apps directory (application code) you must include an acknowledgement:
- *    "This product includes software written by Tim Hudson (tjh@cryptsoft.com)"
- * 
- * THIS SOFTWARE IS PROVIDED BY ERIC YOUNG ``AS IS'' AND
- * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
- * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
- * ARE DISCLAIMED.  IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE
- * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
- * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
- * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
- * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
- * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
- * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
- * SUCH DAMAGE.
- * 
- * The licence and distribution terms for any publically available version or
- * derivative of this code cannot be changed.  i.e. this code cannot simply be
- * copied and put under another distribution licence
- * [including the GNU Public Licence.]
- */
-
-#include <stdio.h>
-#include "cryptlib.h"
-
-#ifndef OPENSSL_NO_SHA
-
-#include <openssl/evp.h>
-#include <openssl/objects.h>
-#include <openssl/x509.h>
-#ifndef OPENSSL_NO_RSA
-#include <openssl/rsa.h>
-#endif
-
-static int init(EVP_MD_CTX *ctx)
-	{ return SHA1_Init(ctx->md_data); }
-
-static int update(EVP_MD_CTX *ctx,const void *data,size_t count)
-	{ return SHA1_Update(ctx->md_data,data,count); }
-
-static int final(EVP_MD_CTX *ctx,unsigned char *md)
-	{ return SHA1_Final(md,ctx->md_data); }
-
-static const EVP_MD sha1_md=
-	{
-	NID_sha1,
-	NID_sha1WithRSAEncryption,
-	SHA_DIGEST_LENGTH,
-	0,
-	init,
-	update,
-	final,
-	NULL,
-	NULL,
-	EVP_PKEY_RSA_method,
-	SHA_CBLOCK,
-	sizeof(EVP_MD *)+sizeof(SHA_CTX),
-	};
-
-const EVP_MD *EVP_sha1(void)
-	{
-	return(&sha1_md);
-	}
-#endif
-
-#ifndef OPENSSL_NO_SHA256
-static int init224(EVP_MD_CTX *ctx)
-	{ return SHA224_Init(ctx->md_data); }
-static int init256(EVP_MD_CTX *ctx)
-	{ return SHA256_Init(ctx->md_data); }
-/*
- * Even though there're separate SHA224_[Update|Final], we call
- * SHA256 functions even in SHA224 context. This is what happens
- * there anyway, so we can spare few CPU cycles:-)
- */
-static int update256(EVP_MD_CTX *ctx,const void *data,size_t count)
-	{ return SHA256_Update(ctx->md_data,data,count); }
-static int final256(EVP_MD_CTX *ctx,unsigned char *md)
-	{ return SHA256_Final(md,ctx->md_data); }
-
-static const EVP_MD sha224_md=
-	{
-	NID_sha224,
-	NID_sha224WithRSAEncryption,
-	SHA224_DIGEST_LENGTH,
-	0,
-	init224,
-	update256,
-	final256,
-	NULL,
-	NULL,
-	EVP_PKEY_RSA_method,
-	SHA256_CBLOCK,
-	sizeof(EVP_MD *)+sizeof(SHA256_CTX),
-	};
-
-const EVP_MD *EVP_sha224(void)
-	{ return(&sha224_md); }
-
-static const EVP_MD sha256_md=
-	{
-	NID_sha256,
-	NID_sha256WithRSAEncryption,
-	SHA256_DIGEST_LENGTH,
-	0,
-	init256,
-	update256,
-	final256,
-	NULL,
-	NULL,
-	EVP_PKEY_RSA_method,
-	SHA256_CBLOCK,
-	sizeof(EVP_MD *)+sizeof(SHA256_CTX),
-	};
-
-const EVP_MD *EVP_sha256(void)
-	{ return(&sha256_md); }
-#endif	/* ifndef OPENSSL_NO_SHA256 */
-
-#ifndef OPENSSL_NO_SHA512
-static int init384(EVP_MD_CTX *ctx)
-	{ return SHA384_Init(ctx->md_data); }
-static int init512(EVP_MD_CTX *ctx)
-	{ return SHA512_Init(ctx->md_data); }
-/* See comment in SHA224/256 section */
-static int update512(EVP_MD_CTX *ctx,const void *data,size_t count)
-	{ return SHA512_Update(ctx->md_data,data,count); }
-static int final512(EVP_MD_CTX *ctx,unsigned char *md)
-	{ return SHA512_Final(md,ctx->md_data); }
-
-static const EVP_MD sha384_md=
-	{
-	NID_sha384,
-	NID_sha384WithRSAEncryption,
-	SHA384_DIGEST_LENGTH,
-	0,
-	init384,
-	update512,
-	final512,
-	NULL,
-	NULL,
-	EVP_PKEY_RSA_method,
-	SHA512_CBLOCK,
-	sizeof(EVP_MD *)+sizeof(SHA512_CTX),
-	};
-
-const EVP_MD *EVP_sha384(void)
-	{ return(&sha384_md); }
-
-static const EVP_MD sha512_md=
-	{
-	NID_sha512,
-	NID_sha512WithRSAEncryption,
-	SHA512_DIGEST_LENGTH,
-	0,
-	init512,
-	update512,
-	final512,
-	NULL,
-	NULL,
-	EVP_PKEY_RSA_method,
-	SHA512_CBLOCK,
-	sizeof(EVP_MD *)+sizeof(SHA512_CTX),
-	};
-
-const EVP_MD *EVP_sha512(void)
-	{ return(&sha512_md); }
-#endif	/* ifndef OPENSSL_NO_SHA512 */
diff --git a/crypto/openssl/crypto/evp/names.c b/crypto/openssl/crypto/evp/names.c
deleted file mode 100644
index 88c1e780dd76..000000000000
--- a/crypto/openssl/crypto/evp/names.c
+++ /dev/null
@@ -1,123 +0,0 @@
-/* crypto/evp/names.c */
-/* Copyright (C) 1995-1998 Eric Young (eay@cryptsoft.com)
- * All rights reserved.
- *
- * This package is an SSL implementation written
- * by Eric Young (eay@cryptsoft.com).
- * The implementation was written so as to conform with Netscapes SSL.
- * 
- * This library is free for commercial and non-commercial use as long as
- * the following conditions are aheared to.  The following conditions
- * apply to all code found in this distribution, be it the RC4, RSA,
- * lhash, DES, etc., code; not just the SSL code.  The SSL documentation
- * included with this distribution is covered by the same copyright terms
- * except that the holder is Tim Hudson (tjh@cryptsoft.com).
- * 
- * Copyright remains Eric Young's, and as such any Copyright notices in
- * the code are not to be removed.
- * If this package is used in a product, Eric Young should be given attribution
- * as the author of the parts of the library used.
- * This can be in the form of a textual message at program startup or
- * in documentation (online or textual) provided with the package.
- * 
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions
- * are met:
- * 1. Redistributions of source code must retain the copyright
- *    notice, this list of conditions and the following disclaimer.
- * 2. Redistributions in binary form must reproduce the above copyright
- *    notice, this list of conditions and the following disclaimer in the
- *    documentation and/or other materials provided with the distribution.
- * 3. All advertising materials mentioning features or use of this software
- *    must display the following acknowledgement:
- *    "This product includes cryptographic software written by
- *     Eric Young (eay@cryptsoft.com)"
- *    The word 'cryptographic' can be left out if the rouines from the library
- *    being used are not cryptographic related :-).
- * 4. If you include any Windows specific code (or a derivative thereof) from 
- *    the apps directory (application code) you must include an acknowledgement:
- *    "This product includes software written by Tim Hudson (tjh@cryptsoft.com)"
- * 
- * THIS SOFTWARE IS PROVIDED BY ERIC YOUNG ``AS IS'' AND
- * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
- * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
- * ARE DISCLAIMED.  IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE
- * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
- * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
- * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
- * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
- * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
- * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
- * SUCH DAMAGE.
- * 
- * The licence and distribution terms for any publically available version or
- * derivative of this code cannot be changed.  i.e. this code cannot simply be
- * copied and put under another distribution licence
- * [including the GNU Public Licence.]
- */
-
-#include <stdio.h>
-#include "cryptlib.h"
-#include <openssl/evp.h>
-#include <openssl/objects.h>
-#include <openssl/x509.h>
-
-int EVP_add_cipher(const EVP_CIPHER *c)
-	{
-	int r;
-
-	r=OBJ_NAME_add(OBJ_nid2sn(c->nid),OBJ_NAME_TYPE_CIPHER_METH,(const char *)c);
-	if (r == 0) return(0);
-	r=OBJ_NAME_add(OBJ_nid2ln(c->nid),OBJ_NAME_TYPE_CIPHER_METH,(const char *)c);
-	return(r);
-	}
-
-int EVP_add_digest(const EVP_MD *md)
-	{
-	int r;
-	const char *name;
-
-	name=OBJ_nid2sn(md->type);
-	r=OBJ_NAME_add(name,OBJ_NAME_TYPE_MD_METH,(const char *)md);
-	if (r == 0) return(0);
-	r=OBJ_NAME_add(OBJ_nid2ln(md->type),OBJ_NAME_TYPE_MD_METH,(const char *)md);
-	if (r == 0) return(0);
-
-	if (md->type != md->pkey_type)
-		{
-		r=OBJ_NAME_add(OBJ_nid2sn(md->pkey_type),
-			OBJ_NAME_TYPE_MD_METH|OBJ_NAME_ALIAS,name);
-		if (r == 0) return(0);
-		r=OBJ_NAME_add(OBJ_nid2ln(md->pkey_type),
-			OBJ_NAME_TYPE_MD_METH|OBJ_NAME_ALIAS,name);
-		}
-	return(r);
-	}
-
-const EVP_CIPHER *EVP_get_cipherbyname(const char *name)
-	{
-	const EVP_CIPHER *cp;
-
-	cp=(const EVP_CIPHER *)OBJ_NAME_get(name,OBJ_NAME_TYPE_CIPHER_METH);
-	return(cp);
-	}
-
-const EVP_MD *EVP_get_digestbyname(const char *name)
-	{
-	const EVP_MD *cp;
-
-	cp=(const EVP_MD *)OBJ_NAME_get(name,OBJ_NAME_TYPE_MD_METH);
-	return(cp);
-	}
-
-void EVP_cleanup(void)
-	{
-	OBJ_NAME_cleanup(OBJ_NAME_TYPE_CIPHER_METH);
-	OBJ_NAME_cleanup(OBJ_NAME_TYPE_MD_METH);
-	/* The above calls will only clean out the contents of the name
-	   hash table, but not the hash table itself.  The following line
-	   does that part.  -- Richard Levitte */
-	OBJ_NAME_cleanup(-1);
-
-	EVP_PBE_cleanup();
-	}
diff --git a/crypto/openssl/crypto/evp/openbsd_hw.c b/crypto/openssl/crypto/evp/openbsd_hw.c
deleted file mode 100644
index 3831a5731e9c..000000000000
--- a/crypto/openssl/crypto/evp/openbsd_hw.c
+++ /dev/null
@@ -1,446 +0,0 @@
-/* Written by Ben Laurie, 2001 */
-/*
- * Copyright (c) 2001 The OpenSSL Project.  All rights reserved.
- *
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions
- * are met:
- *
- * 1. Redistributions of source code must retain the above copyright
- *    notice, this list of conditions and the following disclaimer. 
- *
- * 2. Redistributions in binary form must reproduce the above copyright
- *    notice, this list of conditions and the following disclaimer in
- *    the documentation and/or other materials provided with the
- *    distribution.
- *
- * 3. All advertising materials mentioning features or use of this
- *    software must display the following acknowledgment:
- *    "This product includes software developed by the OpenSSL Project
- *    for use in the OpenSSL Toolkit. (http://www.openssl.org/)"
- *
- * 4. The names "OpenSSL Toolkit" and "OpenSSL Project" must not be used to
- *    endorse or promote products derived from this software without
- *    prior written permission. For written permission, please contact
- *    openssl-core@openssl.org.
- *
- * 5. Products derived from this software may not be called "OpenSSL"
- *    nor may "OpenSSL" appear in their names without prior written
- *    permission of the OpenSSL Project.
- *
- * 6. Redistributions of any form whatsoever must retain the following
- *    acknowledgment:
- *    "This product includes software developed by the OpenSSL Project
- *    for use in the OpenSSL Toolkit (http://www.openssl.org/)"
- *
- * THIS SOFTWARE IS PROVIDED BY THE OpenSSL PROJECT ``AS IS'' AND ANY
- * EXPRESSED OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
- * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR
- * PURPOSE ARE DISCLAIMED.  IN NO EVENT SHALL THE OpenSSL PROJECT OR
- * ITS CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
- * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
- * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
- * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
- * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
- * STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
- * ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED
- * OF THE POSSIBILITY OF SUCH DAMAGE.
- */
-
-#include <openssl/evp.h>
-#include <openssl/objects.h>
-#include <openssl/rsa.h>
-#include "evp_locl.h"
-
-/* This stuff should now all be supported through
- * crypto/engine/hw_openbsd_dev_crypto.c unless I botched it up */
-static void *dummy=&dummy;
-
-#if 0
-
-/* check flag after OpenSSL headers to ensure make depend works */
-#ifdef OPENSSL_OPENBSD_DEV_CRYPTO
-
-#include <fcntl.h>
-#include <stdio.h>
-#include <errno.h>
-#include <sys/ioctl.h>
-#include <crypto/cryptodev.h>
-#include <unistd.h>
-#include <assert.h>
-
-/* longest key supported in hardware */
-#define MAX_HW_KEY	24
-#define MAX_HW_IV	8
-
-#define MD5_DIGEST_LENGTH	16
-#define MD5_CBLOCK		64
-
-static int fd;
-static int dev_failed;
-
-typedef struct session_op session_op;
-
-#define CDATA(ctx) EVP_C_DATA(session_op,ctx)
-
-static void err(const char *str)
-    {
-    fprintf(stderr,"%s: errno %d\n",str,errno);
-    }
-
-static int dev_crypto_init(session_op *ses)
-    {
-    if(dev_failed)
-	return 0;
-    if(!fd)
-	{
-	int cryptodev_fd;
-
-        if ((cryptodev_fd=open("/dev/crypto",O_RDWR,0)) < 0)
-	    {
-	    err("/dev/crypto");
-	    dev_failed=1;
-	    return 0;
-	    }
-        if (ioctl(cryptodev_fd,CRIOGET,&fd) == -1)
-	    {
-	    err("CRIOGET failed");
-	    close(cryptodev_fd);
-	    dev_failed=1;
-	    return 0;
-	    }
-	close(cryptodev_fd);
-	}
-    assert(ses);
-    memset(ses,'\0',sizeof *ses);
-
-    return 1;
-    }
-
-static int dev_crypto_cleanup(EVP_CIPHER_CTX *ctx)
-    {
-    if(ioctl(fd,CIOCFSESSION,&CDATA(ctx)->ses) == -1)
-	err("CIOCFSESSION failed");
-
-    OPENSSL_free(CDATA(ctx)->key);
-
-    return 1;
-    }
-
-static int dev_crypto_init_key(EVP_CIPHER_CTX *ctx,int cipher,
-			       const unsigned char *key,int klen)
-    {
-    if(!dev_crypto_init(CDATA(ctx)))
-	return 0;
-
-    CDATA(ctx)->key=OPENSSL_malloc(MAX_HW_KEY);
-
-    assert(ctx->cipher->iv_len <= MAX_HW_IV);
-
-    memcpy(CDATA(ctx)->key,key,klen);
-    
-    CDATA(ctx)->cipher=cipher;
-    CDATA(ctx)->keylen=klen;
-
-    if (ioctl(fd,CIOCGSESSION,CDATA(ctx)) == -1)
-	{
-	err("CIOCGSESSION failed");
-	return 0;
-	}
-    return 1;
-    }
-
-static int dev_crypto_cipher(EVP_CIPHER_CTX *ctx,unsigned char *out,
-			     const unsigned char *in,unsigned int inl)
-    {
-    struct crypt_op cryp;
-    unsigned char lb[MAX_HW_IV];
-
-    if(!inl)
-	return 1;
-
-    assert(CDATA(ctx));
-    assert(!dev_failed);
-
-    memset(&cryp,'\0',sizeof cryp);
-    cryp.ses=CDATA(ctx)->ses;
-    cryp.op=ctx->encrypt ? COP_ENCRYPT : COP_DECRYPT;
-    cryp.flags=0;
-    cryp.len=inl;
-    assert((inl&(ctx->cipher->block_size-1)) == 0);
-    cryp.src=(caddr_t)in;
-    cryp.dst=(caddr_t)out;
-    cryp.mac=0;
-    if(ctx->cipher->iv_len)
-	cryp.iv=(caddr_t)ctx->iv;
-
-    if(!ctx->encrypt)
-	memcpy(lb,&in[cryp.len-ctx->cipher->iv_len],ctx->cipher->iv_len);
-
-    if(ioctl(fd, CIOCCRYPT, &cryp) == -1)
-	{
-	if(errno == EINVAL) /* buffers are misaligned */
-	    {
-	    unsigned int cinl=0;
-	    char *cin=NULL;
-	    char *cout=NULL;
-
-	    /* NB: this can only make cinl != inl with stream ciphers */
-	    cinl=(inl+3)/4*4;
-
-	    if(((unsigned long)in&3) || cinl != inl)
-		{
-		cin=OPENSSL_malloc(cinl);
-		memcpy(cin,in,inl);
-		cryp.src=cin;
-		}
-
-	    if(((unsigned long)out&3) || cinl != inl)
-		{
-		cout=OPENSSL_malloc(cinl);
-		cryp.dst=cout;
-		}
-
-	    cryp.len=cinl;
-
-	    if(ioctl(fd, CIOCCRYPT, &cryp) == -1)
-		{
-		err("CIOCCRYPT(2) failed");
-		printf("src=%p dst=%p\n",cryp.src,cryp.dst);
-		abort();
-		return 0;
-		}
-		
-	    if(cout)
-		{
-		memcpy(out,cout,inl);
-		OPENSSL_free(cout);
-		}
-	    if(cin)
-		OPENSSL_free(cin);
-	    }
-	else 
-	    {	    
-	    err("CIOCCRYPT failed");
-	    abort();
-	    return 0;
-	    }
-	}
-
-    if(ctx->encrypt)
-	memcpy(ctx->iv,&out[cryp.len-ctx->cipher->iv_len],ctx->cipher->iv_len);
-    else
-	memcpy(ctx->iv,lb,ctx->cipher->iv_len);
-
-    return 1;
-    }
-
-static int dev_crypto_des_ede3_init_key(EVP_CIPHER_CTX *ctx,
-					const unsigned char *key,
-					const unsigned char *iv, int enc)
-    { return dev_crypto_init_key(ctx,CRYPTO_3DES_CBC,key,24); }
-
-#define dev_crypto_des_ede3_cbc_cipher dev_crypto_cipher
-
-BLOCK_CIPHER_def_cbc(dev_crypto_des_ede3, session_op, NID_des_ede3, 8, 24, 8,
-		     0, dev_crypto_des_ede3_init_key,
-		     dev_crypto_cleanup, 
-		     EVP_CIPHER_set_asn1_iv,
-		     EVP_CIPHER_get_asn1_iv,
-		     NULL)
-
-static int dev_crypto_rc4_init_key(EVP_CIPHER_CTX *ctx,
-					const unsigned char *key,
-					const unsigned char *iv, int enc)
-    { return dev_crypto_init_key(ctx,CRYPTO_ARC4,key,16); }
-
-static const EVP_CIPHER r4_cipher=
-    {
-    NID_rc4,
-    1,16,0,	/* FIXME: key should be up to 256 bytes */
-    EVP_CIPH_VARIABLE_LENGTH,
-    dev_crypto_rc4_init_key,
-    dev_crypto_cipher,
-    dev_crypto_cleanup,
-    sizeof(session_op),
-    NULL,
-    NULL,
-    NULL
-    };
-
-const EVP_CIPHER *EVP_dev_crypto_rc4(void)
-    { return &r4_cipher; }
-
-typedef struct
-    {
-    session_op sess;
-    char *data;
-    int len;
-    unsigned char md[EVP_MAX_MD_SIZE];
-    } MD_DATA;
-
-static int dev_crypto_init_digest(MD_DATA *md_data,int mac)
-    {
-    if(!dev_crypto_init(&md_data->sess))
-	return 0;
-
-    md_data->len=0;
-    md_data->data=NULL;
-
-    md_data->sess.mac=mac;
-
-    if (ioctl(fd,CIOCGSESSION,&md_data->sess) == -1)
-	{
-	err("CIOCGSESSION failed");
-	return 0;
-	}
-    return 1;
-    }
-
-static int dev_crypto_cleanup_digest(MD_DATA *md_data)
-    {
-    if (ioctl(fd,CIOCFSESSION,&md_data->sess.ses) == -1)
-	{
-	err("CIOCFSESSION failed");
-	return 0;
-	}
-
-    return 1;
-    }
-
-/* FIXME: if device can do chained MACs, then don't accumulate */
-/* FIXME: move accumulation to the framework */
-static int dev_crypto_md5_init(EVP_MD_CTX *ctx)
-    { return dev_crypto_init_digest(ctx->md_data,CRYPTO_MD5); }
-
-static int do_digest(int ses,unsigned char *md,const void *data,int len)
-    {
-    struct crypt_op cryp;
-    static unsigned char md5zero[16]=
-	{
-	0xd4,0x1d,0x8c,0xd9,0x8f,0x00,0xb2,0x04,
-	0xe9,0x80,0x09,0x98,0xec,0xf8,0x42,0x7e
-	};
-
-    /* some cards can't do zero length */
-    if(!len)
-	{
-	memcpy(md,md5zero,16);
-	return 1;
-	}
-
-    memset(&cryp,'\0',sizeof cryp);
-    cryp.ses=ses;
-    cryp.op=COP_ENCRYPT;/* required to do the MAC rather than check it */
-    cryp.len=len;
-    cryp.src=(caddr_t)data;
-    cryp.dst=(caddr_t)data; // FIXME!!!
-    cryp.mac=(caddr_t)md;
-
-    if(ioctl(fd, CIOCCRYPT, &cryp) == -1)
-	{
-	if(errno == EINVAL) /* buffer is misaligned */
-	    {
-	    char *dcopy;
-
-	    dcopy=OPENSSL_malloc(len);
-	    memcpy(dcopy,data,len);
-	    cryp.src=dcopy;
-	    cryp.dst=cryp.src; // FIXME!!!
-
-	    if(ioctl(fd, CIOCCRYPT, &cryp) == -1)
-		{
-		err("CIOCCRYPT(MAC2) failed");
-		abort();
-		return 0;
-		}
-	    OPENSSL_free(dcopy);
-	    }
-	else
-	    {
-	    err("CIOCCRYPT(MAC) failed");
-	    abort();
-	    return 0;
-	    }
-	}
-    //    printf("done\n");
-
-    return 1;
-    }
-
-static int dev_crypto_md5_update(EVP_MD_CTX *ctx,const void *data,
-				 unsigned long len)
-    {
-    MD_DATA *md_data=ctx->md_data;
-
-    if(ctx->flags&EVP_MD_CTX_FLAG_ONESHOT)
-	return do_digest(md_data->sess.ses,md_data->md,data,len);
-
-    md_data->data=OPENSSL_realloc(md_data->data,md_data->len+len);
-    memcpy(md_data->data+md_data->len,data,len);
-    md_data->len+=len;
-
-    return 1;
-    }	
-
-static int dev_crypto_md5_final(EVP_MD_CTX *ctx,unsigned char *md)
-    {
-    int ret;
-    MD_DATA *md_data=ctx->md_data;
-
-    if(ctx->flags&EVP_MD_CTX_FLAG_ONESHOT)
-	{
-	memcpy(md,md_data->md,MD5_DIGEST_LENGTH);
-	ret=1;
-	}
-    else
-	{
-	ret=do_digest(md_data->sess.ses,md,md_data->data,md_data->len);
-	OPENSSL_free(md_data->data);
-	md_data->data=NULL;
-	md_data->len=0;
-	}
-
-    return ret;
-    }
-
-static int dev_crypto_md5_copy(EVP_MD_CTX *to,const EVP_MD_CTX *from)
-    {
-    const MD_DATA *from_md=from->md_data;
-    MD_DATA *to_md=to->md_data;
-
-    // How do we copy sessions?
-    assert(from->digest->flags&EVP_MD_FLAG_ONESHOT);
-
-    to_md->data=OPENSSL_malloc(from_md->len);
-    memcpy(to_md->data,from_md->data,from_md->len);
-
-    return 1;
-    }
-
-static int dev_crypto_md5_cleanup(EVP_MD_CTX *ctx)
-    {
-    return dev_crypto_cleanup_digest(ctx->md_data);
-    }
-
-static const EVP_MD md5_md=
-    {
-    NID_md5,
-    NID_md5WithRSAEncryption,
-    MD5_DIGEST_LENGTH,
-    EVP_MD_FLAG_ONESHOT,	// XXX: set according to device info...
-    dev_crypto_md5_init,
-    dev_crypto_md5_update,
-    dev_crypto_md5_final,
-    dev_crypto_md5_copy,
-    dev_crypto_md5_cleanup,
-    EVP_PKEY_RSA_method,
-    MD5_CBLOCK,
-    sizeof(MD_DATA),
-    };
-
-const EVP_MD *EVP_dev_crypto_md5(void)
-    { return &md5_md; }
-
-#endif
-#endif
diff --git a/crypto/openssl/crypto/evp/p5_crpt.c b/crypto/openssl/crypto/evp/p5_crpt.c
deleted file mode 100644
index 48d50014a041..000000000000
--- a/crypto/openssl/crypto/evp/p5_crpt.c
+++ /dev/null
@@ -1,159 +0,0 @@
-/* p5_crpt.c */
-/* Written by Dr Stephen N Henson (shenson@bigfoot.com) for the OpenSSL
- * project 1999.
- */
-/* ====================================================================
- * Copyright (c) 1999 The OpenSSL Project.  All rights reserved.
- *
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions
- * are met:
- *
- * 1. Redistributions of source code must retain the above copyright
- *    notice, this list of conditions and the following disclaimer. 
- *
- * 2. Redistributions in binary form must reproduce the above copyright
- *    notice, this list of conditions and the following disclaimer in
- *    the documentation and/or other materials provided with the
- *    distribution.
- *
- * 3. All advertising materials mentioning features or use of this
- *    software must display the following acknowledgment:
- *    "This product includes software developed by the OpenSSL Project
- *    for use in the OpenSSL Toolkit. (http://www.OpenSSL.org/)"
- *
- * 4. The names "OpenSSL Toolkit" and "OpenSSL Project" must not be used to
- *    endorse or promote products derived from this software without
- *    prior written permission. For written permission, please contact
- *    licensing@OpenSSL.org.
- *
- * 5. Products derived from this software may not be called "OpenSSL"
- *    nor may "OpenSSL" appear in their names without prior written
- *    permission of the OpenSSL Project.
- *
- * 6. Redistributions of any form whatsoever must retain the following
- *    acknowledgment:
- *    "This product includes software developed by the OpenSSL Project
- *    for use in the OpenSSL Toolkit (http://www.OpenSSL.org/)"
- *
- * THIS SOFTWARE IS PROVIDED BY THE OpenSSL PROJECT ``AS IS'' AND ANY
- * EXPRESSED OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
- * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR
- * PURPOSE ARE DISCLAIMED.  IN NO EVENT SHALL THE OpenSSL PROJECT OR
- * ITS CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
- * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
- * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
- * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
- * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
- * STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
- * ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED
- * OF THE POSSIBILITY OF SUCH DAMAGE.
- * ====================================================================
- *
- * This product includes cryptographic software written by Eric Young
- * (eay@cryptsoft.com).  This product includes software written by Tim
- * Hudson (tjh@cryptsoft.com).
- *
- */
-
-#include <stdio.h>
-#include <stdlib.h>
-#include "cryptlib.h"
-#include <openssl/x509.h>
-#include <openssl/evp.h>
-
-/* PKCS#5 v1.5 compatible PBE functions: see PKCS#5 v2.0 for more info.
- */
-
-void PKCS5_PBE_add(void)
-{
-#ifndef OPENSSL_NO_DES
-#  ifndef OPENSSL_NO_MD5
-EVP_PBE_alg_add(NID_pbeWithMD5AndDES_CBC, EVP_des_cbc(), EVP_md5(),
-							 PKCS5_PBE_keyivgen);
-#  endif
-#  ifndef OPENSSL_NO_MD2
-EVP_PBE_alg_add(NID_pbeWithMD2AndDES_CBC, EVP_des_cbc(), EVP_md2(),
-							 PKCS5_PBE_keyivgen);
-#  endif
-#  ifndef OPENSSL_NO_SHA
-EVP_PBE_alg_add(NID_pbeWithSHA1AndDES_CBC, EVP_des_cbc(), EVP_sha1(),
-							 PKCS5_PBE_keyivgen);
-#  endif
-#endif
-#ifndef OPENSSL_NO_RC2
-#  ifndef OPENSSL_NO_MD5
-EVP_PBE_alg_add(NID_pbeWithMD5AndRC2_CBC, EVP_rc2_64_cbc(), EVP_md5(),
-							 PKCS5_PBE_keyivgen);
-#  endif
-#  ifndef OPENSSL_NO_MD2
-EVP_PBE_alg_add(NID_pbeWithMD2AndRC2_CBC, EVP_rc2_64_cbc(), EVP_md2(),
-							 PKCS5_PBE_keyivgen);
-#  endif
-#  ifndef OPENSSL_NO_SHA
-EVP_PBE_alg_add(NID_pbeWithSHA1AndRC2_CBC, EVP_rc2_64_cbc(), EVP_sha1(),
-							 PKCS5_PBE_keyivgen);
-#  endif
-#endif
-#ifndef OPENSSL_NO_HMAC
-EVP_PBE_alg_add(NID_pbes2, NULL, NULL, PKCS5_v2_PBE_keyivgen);
-#endif
-}
-
-int PKCS5_PBE_keyivgen(EVP_CIPHER_CTX *cctx, const char *pass, int passlen,
-			 ASN1_TYPE *param, const EVP_CIPHER *cipher, const EVP_MD *md,
-			 int en_de)
-{
-	EVP_MD_CTX ctx;
-	unsigned char md_tmp[EVP_MAX_MD_SIZE];
-	unsigned char key[EVP_MAX_KEY_LENGTH], iv[EVP_MAX_IV_LENGTH];
-	int i;
-	PBEPARAM *pbe;
-	int saltlen, iter;
-	unsigned char *salt;
-	const unsigned char *pbuf;
-
-	/* Extract useful info from parameter */
-	if (param == NULL || param->type != V_ASN1_SEQUENCE ||
-	    param->value.sequence == NULL) {
-		EVPerr(EVP_F_PKCS5_PBE_KEYIVGEN,EVP_R_DECODE_ERROR);
-		return 0;
-	}
-
-	pbuf = param->value.sequence->data;
-	if (!(pbe = d2i_PBEPARAM(NULL, &pbuf, param->value.sequence->length))) {
-		EVPerr(EVP_F_PKCS5_PBE_KEYIVGEN,EVP_R_DECODE_ERROR);
-		return 0;
-	}
-
-	if (!pbe->iter) iter = 1;
-	else iter = ASN1_INTEGER_get (pbe->iter);
-	salt = pbe->salt->data;
-	saltlen = pbe->salt->length;
-
-	if(!pass) passlen = 0;
-	else if(passlen == -1) passlen = strlen(pass);
-
-	EVP_MD_CTX_init(&ctx);
-	EVP_DigestInit_ex(&ctx, md, NULL);
-	EVP_DigestUpdate(&ctx, pass, passlen);
-	EVP_DigestUpdate(&ctx, salt, saltlen);
-	PBEPARAM_free(pbe);
-	EVP_DigestFinal_ex(&ctx, md_tmp, NULL);
-	for (i = 1; i < iter; i++) {
-		EVP_DigestInit_ex(&ctx, md, NULL);
-		EVP_DigestUpdate(&ctx, md_tmp, EVP_MD_size(md));
-		EVP_DigestFinal_ex (&ctx, md_tmp, NULL);
-	}
-	EVP_MD_CTX_cleanup(&ctx);
-	OPENSSL_assert(EVP_CIPHER_key_length(cipher) <= (int)sizeof(md_tmp));
-	memcpy(key, md_tmp, EVP_CIPHER_key_length(cipher));
-	OPENSSL_assert(EVP_CIPHER_iv_length(cipher) <= 16);
-	memcpy(iv, md_tmp + (16 - EVP_CIPHER_iv_length(cipher)),
-						 EVP_CIPHER_iv_length(cipher));
-	EVP_CipherInit_ex(cctx, cipher, NULL, key, iv, en_de);
-	OPENSSL_cleanse(md_tmp, EVP_MAX_MD_SIZE);
-	OPENSSL_cleanse(key, EVP_MAX_KEY_LENGTH);
-	OPENSSL_cleanse(iv, EVP_MAX_IV_LENGTH);
-	return 1;
-}
diff --git a/crypto/openssl/crypto/evp/p5_crpt2.c b/crypto/openssl/crypto/evp/p5_crpt2.c
deleted file mode 100644
index c969d5a2062a..000000000000
--- a/crypto/openssl/crypto/evp/p5_crpt2.c
+++ /dev/null
@@ -1,263 +0,0 @@
-/* p5_crpt2.c */
-/* Written by Dr Stephen N Henson (shenson@bigfoot.com) for the OpenSSL
- * project 1999.
- */
-/* ====================================================================
- * Copyright (c) 1999 The OpenSSL Project.  All rights reserved.
- *
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions
- * are met:
- *
- * 1. Redistributions of source code must retain the above copyright
- *    notice, this list of conditions and the following disclaimer. 
- *
- * 2. Redistributions in binary form must reproduce the above copyright
- *    notice, this list of conditions and the following disclaimer in
- *    the documentation and/or other materials provided with the
- *    distribution.
- *
- * 3. All advertising materials mentioning features or use of this
- *    software must display the following acknowledgment:
- *    "This product includes software developed by the OpenSSL Project
- *    for use in the OpenSSL Toolkit. (http://www.OpenSSL.org/)"
- *
- * 4. The names "OpenSSL Toolkit" and "OpenSSL Project" must not be used to
- *    endorse or promote products derived from this software without
- *    prior written permission. For written permission, please contact
- *    licensing@OpenSSL.org.
- *
- * 5. Products derived from this software may not be called "OpenSSL"
- *    nor may "OpenSSL" appear in their names without prior written
- *    permission of the OpenSSL Project.
- *
- * 6. Redistributions of any form whatsoever must retain the following
- *    acknowledgment:
- *    "This product includes software developed by the OpenSSL Project
- *    for use in the OpenSSL Toolkit (http://www.OpenSSL.org/)"
- *
- * THIS SOFTWARE IS PROVIDED BY THE OpenSSL PROJECT ``AS IS'' AND ANY
- * EXPRESSED OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
- * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR
- * PURPOSE ARE DISCLAIMED.  IN NO EVENT SHALL THE OpenSSL PROJECT OR
- * ITS CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
- * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
- * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
- * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
- * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
- * STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
- * ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED
- * OF THE POSSIBILITY OF SUCH DAMAGE.
- * ====================================================================
- *
- * This product includes cryptographic software written by Eric Young
- * (eay@cryptsoft.com).  This product includes software written by Tim
- * Hudson (tjh@cryptsoft.com).
- *
- */
-#include <stdio.h>
-#include <stdlib.h>
-#include "cryptlib.h"
-#if !defined(OPENSSL_NO_HMAC) && !defined(OPENSSL_NO_SHA)
-#include <openssl/x509.h>
-#include <openssl/evp.h>
-#include <openssl/hmac.h>
-
-/* set this to print out info about the keygen algorithm */
-/* #define DEBUG_PKCS5V2 */
-
-#ifdef DEBUG_PKCS5V2
-	static void h__dump (const unsigned char *p, int len);
-#endif
-
-/* This is an implementation of PKCS#5 v2.0 password based encryption key
- * derivation function PBKDF2 using the only currently defined function HMAC
- * with SHA1. Verified against test vectors posted by Peter Gutmann
- * <pgut001@cs.auckland.ac.nz> to the PKCS-TNG <pkcs-tng@rsa.com> mailing list.
- */
-
-int PKCS5_PBKDF2_HMAC_SHA1(const char *pass, int passlen,
-			   const unsigned char *salt, int saltlen, int iter,
-			   int keylen, unsigned char *out)
-{
-	unsigned char digtmp[SHA_DIGEST_LENGTH], *p, itmp[4];
-	int cplen, j, k, tkeylen;
-	unsigned long i = 1;
-	HMAC_CTX hctx;
-
-	HMAC_CTX_init(&hctx);
-	p = out;
-	tkeylen = keylen;
-	if(!pass) passlen = 0;
-	else if(passlen == -1) passlen = strlen(pass);
-	while(tkeylen) {
-		if(tkeylen > SHA_DIGEST_LENGTH) cplen = SHA_DIGEST_LENGTH;
-		else cplen = tkeylen;
-		/* We are unlikely to ever use more than 256 blocks (5120 bits!)
-		 * but just in case...
-		 */
-		itmp[0] = (unsigned char)((i >> 24) & 0xff);
-		itmp[1] = (unsigned char)((i >> 16) & 0xff);
-		itmp[2] = (unsigned char)((i >> 8) & 0xff);
-		itmp[3] = (unsigned char)(i & 0xff);
-		HMAC_Init_ex(&hctx, pass, passlen, EVP_sha1(), NULL);
-		HMAC_Update(&hctx, salt, saltlen);
-		HMAC_Update(&hctx, itmp, 4);
-		HMAC_Final(&hctx, digtmp, NULL);
-		memcpy(p, digtmp, cplen);
-		for(j = 1; j < iter; j++) {
-			HMAC(EVP_sha1(), pass, passlen,
-				 digtmp, SHA_DIGEST_LENGTH, digtmp, NULL);
-			for(k = 0; k < cplen; k++) p[k] ^= digtmp[k];
-		}
-		tkeylen-= cplen;
-		i++;
-		p+= cplen;
-	}
-	HMAC_CTX_cleanup(&hctx);
-#ifdef DEBUG_PKCS5V2
-	fprintf(stderr, "Password:\n");
-	h__dump (pass, passlen);
-	fprintf(stderr, "Salt:\n");
-	h__dump (salt, saltlen);
-	fprintf(stderr, "Iteration count %d\n", iter);
-	fprintf(stderr, "Key:\n");
-	h__dump (out, keylen);
-#endif
-	return 1;
-}
-
-#ifdef DO_TEST
-main()
-{
-	unsigned char out[4];
-	unsigned char salt[] = {0x12, 0x34, 0x56, 0x78};
-	PKCS5_PBKDF2_HMAC_SHA1("password", -1, salt, 4, 5, 4, out);
-	fprintf(stderr, "Out %02X %02X %02X %02X\n",
-					 out[0], out[1], out[2], out[3]);
-}
-
-#endif
-
-/* Now the key derivation function itself. This is a bit evil because
- * it has to check the ASN1 parameters are valid: and there are quite a
- * few of them...
- */
-
-int PKCS5_v2_PBE_keyivgen(EVP_CIPHER_CTX *ctx, const char *pass, int passlen,
-                         ASN1_TYPE *param, const EVP_CIPHER *c, const EVP_MD *md,
-                         int en_de)
-{
-	unsigned char *salt, key[EVP_MAX_KEY_LENGTH];
-	const unsigned char *pbuf;
-	int saltlen, iter, plen;
-	unsigned int keylen;
-	PBE2PARAM *pbe2 = NULL;
-	const EVP_CIPHER *cipher;
-	PBKDF2PARAM *kdf = NULL;
-
-	if (param == NULL || param->type != V_ASN1_SEQUENCE ||
-	    param->value.sequence == NULL) {
-		EVPerr(EVP_F_PKCS5_V2_PBE_KEYIVGEN,EVP_R_DECODE_ERROR);
-		return 0;
-	}
-
-	pbuf = param->value.sequence->data;
-	plen = param->value.sequence->length;
-	if(!(pbe2 = d2i_PBE2PARAM(NULL, &pbuf, plen))) {
-		EVPerr(EVP_F_PKCS5_V2_PBE_KEYIVGEN,EVP_R_DECODE_ERROR);
-		return 0;
-	}
-
-	/* See if we recognise the key derivation function */
-
-	if(OBJ_obj2nid(pbe2->keyfunc->algorithm) != NID_id_pbkdf2) {
-		EVPerr(EVP_F_PKCS5_V2_PBE_KEYIVGEN,
-				EVP_R_UNSUPPORTED_KEY_DERIVATION_FUNCTION);
-		goto err;
-	}
-
-	/* lets see if we recognise the encryption algorithm.
-	 */
-
-	cipher = EVP_get_cipherbyname(
-			OBJ_nid2sn(OBJ_obj2nid(pbe2->encryption->algorithm)));
-
-	if(!cipher) {
-		EVPerr(EVP_F_PKCS5_V2_PBE_KEYIVGEN,
-						EVP_R_UNSUPPORTED_CIPHER);
-		goto err;
-	}
-
-	/* Fixup cipher based on AlgorithmIdentifier */
-	EVP_CipherInit_ex(ctx, cipher, NULL, NULL, NULL, en_de);
-	if(EVP_CIPHER_asn1_to_param(ctx, pbe2->encryption->parameter) < 0) {
-		EVPerr(EVP_F_PKCS5_V2_PBE_KEYIVGEN,
-					EVP_R_CIPHER_PARAMETER_ERROR);
-		goto err;
-	}
-	keylen = EVP_CIPHER_CTX_key_length(ctx);
-	OPENSSL_assert(keylen <= sizeof key);
-
-	/* Now decode key derivation function */
-
-	if(!pbe2->keyfunc->parameter ||
-		 (pbe2->keyfunc->parameter->type != V_ASN1_SEQUENCE))
-		{
-		EVPerr(EVP_F_PKCS5_V2_PBE_KEYIVGEN,EVP_R_DECODE_ERROR);
-		goto err;
-		}
-
-	pbuf = pbe2->keyfunc->parameter->value.sequence->data;
-	plen = pbe2->keyfunc->parameter->value.sequence->length;
-	if(!(kdf = d2i_PBKDF2PARAM(NULL, &pbuf, plen)) ) {
-		EVPerr(EVP_F_PKCS5_V2_PBE_KEYIVGEN,EVP_R_DECODE_ERROR);
-		goto err;
-	}
-
-	PBE2PARAM_free(pbe2);
-	pbe2 = NULL;
-
-	/* Now check the parameters of the kdf */
-
-	if(kdf->keylength && (ASN1_INTEGER_get(kdf->keylength) != (int)keylen)){
-		EVPerr(EVP_F_PKCS5_V2_PBE_KEYIVGEN,
-						EVP_R_UNSUPPORTED_KEYLENGTH);
-		goto err;
-	}
-
-	if(kdf->prf && (OBJ_obj2nid(kdf->prf->algorithm) != NID_hmacWithSHA1)) {
-		EVPerr(EVP_F_PKCS5_V2_PBE_KEYIVGEN, EVP_R_UNSUPPORTED_PRF);
-		goto err;
-	}
-
-	if(kdf->salt->type != V_ASN1_OCTET_STRING) {
-		EVPerr(EVP_F_PKCS5_V2_PBE_KEYIVGEN,
-						EVP_R_UNSUPPORTED_SALT_TYPE);
-		goto err;
-	}
-
-	/* it seems that its all OK */
-	salt = kdf->salt->value.octet_string->data;
-	saltlen = kdf->salt->value.octet_string->length;
-	iter = ASN1_INTEGER_get(kdf->iter);
-	PKCS5_PBKDF2_HMAC_SHA1(pass, passlen, salt, saltlen, iter, keylen, key);
-	EVP_CipherInit_ex(ctx, NULL, NULL, key, NULL, en_de);
-	OPENSSL_cleanse(key, keylen);
-	PBKDF2PARAM_free(kdf);
-	return 1;
-
-	err:
-	PBE2PARAM_free(pbe2);
-	PBKDF2PARAM_free(kdf);
-	return 0;
-}
-
-#ifdef DEBUG_PKCS5V2
-static void h__dump (const unsigned char *p, int len)
-{
-        for (; len --; p++) fprintf(stderr, "%02X ", *p);
-        fprintf(stderr, "\n");
-}
-#endif
-#endif
diff --git a/crypto/openssl/crypto/evp/p_dec.c b/crypto/openssl/crypto/evp/p_dec.c
deleted file mode 100644
index f64901f65349..000000000000
--- a/crypto/openssl/crypto/evp/p_dec.c
+++ /dev/null
@@ -1,87 +0,0 @@
-/* crypto/evp/p_dec.c */
-/* Copyright (C) 1995-1998 Eric Young (eay@cryptsoft.com)
- * All rights reserved.
- *
- * This package is an SSL implementation written
- * by Eric Young (eay@cryptsoft.com).
- * The implementation was written so as to conform with Netscapes SSL.
- * 
- * This library is free for commercial and non-commercial use as long as
- * the following conditions are aheared to.  The following conditions
- * apply to all code found in this distribution, be it the RC4, RSA,
- * lhash, DES, etc., code; not just the SSL code.  The SSL documentation
- * included with this distribution is covered by the same copyright terms
- * except that the holder is Tim Hudson (tjh@cryptsoft.com).
- * 
- * Copyright remains Eric Young's, and as such any Copyright notices in
- * the code are not to be removed.
- * If this package is used in a product, Eric Young should be given attribution
- * as the author of the parts of the library used.
- * This can be in the form of a textual message at program startup or
- * in documentation (online or textual) provided with the package.
- * 
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions
- * are met:
- * 1. Redistributions of source code must retain the copyright
- *    notice, this list of conditions and the following disclaimer.
- * 2. Redistributions in binary form must reproduce the above copyright
- *    notice, this list of conditions and the following disclaimer in the
- *    documentation and/or other materials provided with the distribution.
- * 3. All advertising materials mentioning features or use of this software
- *    must display the following acknowledgement:
- *    "This product includes cryptographic software written by
- *     Eric Young (eay@cryptsoft.com)"
- *    The word 'cryptographic' can be left out if the rouines from the library
- *    being used are not cryptographic related :-).
- * 4. If you include any Windows specific code (or a derivative thereof) from 
- *    the apps directory (application code) you must include an acknowledgement:
- *    "This product includes software written by Tim Hudson (tjh@cryptsoft.com)"
- * 
- * THIS SOFTWARE IS PROVIDED BY ERIC YOUNG ``AS IS'' AND
- * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
- * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
- * ARE DISCLAIMED.  IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE
- * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
- * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
- * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
- * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
- * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
- * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
- * SUCH DAMAGE.
- * 
- * The licence and distribution terms for any publically available version or
- * derivative of this code cannot be changed.  i.e. this code cannot simply be
- * copied and put under another distribution licence
- * [including the GNU Public Licence.]
- */
-
-#include <stdio.h>
-#include "cryptlib.h"
-#include <openssl/rand.h>
-#ifndef OPENSSL_NO_RSA
-#include <openssl/rsa.h>
-#endif
-#include <openssl/evp.h>
-#include <openssl/objects.h>
-#include <openssl/x509.h>
-
-int EVP_PKEY_decrypt(unsigned char *key, const unsigned char *ek, int ekl,
-	     EVP_PKEY *priv)
-	{
-	int ret= -1;
-	
-#ifndef OPENSSL_NO_RSA
-	if (priv->type != EVP_PKEY_RSA)
-		{
-#endif
-		EVPerr(EVP_F_EVP_PKEY_DECRYPT,EVP_R_PUBLIC_KEY_NOT_RSA);
-#ifndef OPENSSL_NO_RSA
-		goto err;
-                }
-
-	ret=RSA_private_decrypt(ekl,ek,key,priv->pkey.rsa,RSA_PKCS1_PADDING);
-err:
-#endif
-	return(ret);
-	}
diff --git a/crypto/openssl/crypto/evp/p_enc.c b/crypto/openssl/crypto/evp/p_enc.c
deleted file mode 100644
index c2dfdc52adc9..000000000000
--- a/crypto/openssl/crypto/evp/p_enc.c
+++ /dev/null
@@ -1,86 +0,0 @@
-/* crypto/evp/p_enc.c */
-/* Copyright (C) 1995-1998 Eric Young (eay@cryptsoft.com)
- * All rights reserved.
- *
- * This package is an SSL implementation written
- * by Eric Young (eay@cryptsoft.com).
- * The implementation was written so as to conform with Netscapes SSL.
- * 
- * This library is free for commercial and non-commercial use as long as
- * the following conditions are aheared to.  The following conditions
- * apply to all code found in this distribution, be it the RC4, RSA,
- * lhash, DES, etc., code; not just the SSL code.  The SSL documentation
- * included with this distribution is covered by the same copyright terms
- * except that the holder is Tim Hudson (tjh@cryptsoft.com).
- * 
- * Copyright remains Eric Young's, and as such any Copyright notices in
- * the code are not to be removed.
- * If this package is used in a product, Eric Young should be given attribution
- * as the author of the parts of the library used.
- * This can be in the form of a textual message at program startup or
- * in documentation (online or textual) provided with the package.
- * 
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions
- * are met:
- * 1. Redistributions of source code must retain the copyright
- *    notice, this list of conditions and the following disclaimer.
- * 2. Redistributions in binary form must reproduce the above copyright
- *    notice, this list of conditions and the following disclaimer in the
- *    documentation and/or other materials provided with the distribution.
- * 3. All advertising materials mentioning features or use of this software
- *    must display the following acknowledgement:
- *    "This product includes cryptographic software written by
- *     Eric Young (eay@cryptsoft.com)"
- *    The word 'cryptographic' can be left out if the rouines from the library
- *    being used are not cryptographic related :-).
- * 4. If you include any Windows specific code (or a derivative thereof) from 
- *    the apps directory (application code) you must include an acknowledgement:
- *    "This product includes software written by Tim Hudson (tjh@cryptsoft.com)"
- * 
- * THIS SOFTWARE IS PROVIDED BY ERIC YOUNG ``AS IS'' AND
- * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
- * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
- * ARE DISCLAIMED.  IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE
- * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
- * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
- * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
- * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
- * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
- * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
- * SUCH DAMAGE.
- * 
- * The licence and distribution terms for any publically available version or
- * derivative of this code cannot be changed.  i.e. this code cannot simply be
- * copied and put under another distribution licence
- * [including the GNU Public Licence.]
- */
-
-#include <stdio.h>
-#include "cryptlib.h"
-#include <openssl/rand.h>
-#ifndef OPENSSL_NO_RSA
-#include <openssl/rsa.h>
-#endif
-#include <openssl/evp.h>
-#include <openssl/objects.h>
-#include <openssl/x509.h>
-
-int EVP_PKEY_encrypt(unsigned char *ek, const unsigned char *key, int key_len,
-	     EVP_PKEY *pubk)
-	{
-	int ret=0;
-	
-#ifndef OPENSSL_NO_RSA
-	if (pubk->type != EVP_PKEY_RSA)
-		{
-#endif
-		EVPerr(EVP_F_EVP_PKEY_ENCRYPT,EVP_R_PUBLIC_KEY_NOT_RSA);
-#ifndef OPENSSL_NO_RSA
-		goto err;
-		}
-	ret=RSA_public_encrypt(key_len,key,ek,pubk->pkey.rsa,RSA_PKCS1_PADDING);
-err:
-#endif
-	return(ret);
-	}
diff --git a/crypto/openssl/crypto/evp/p_lib.c b/crypto/openssl/crypto/evp/p_lib.c
deleted file mode 100644
index 22155ecf62c4..000000000000
--- a/crypto/openssl/crypto/evp/p_lib.c
+++ /dev/null
@@ -1,502 +0,0 @@
-/* crypto/evp/p_lib.c */
-/* Copyright (C) 1995-1998 Eric Young (eay@cryptsoft.com)
- * All rights reserved.
- *
- * This package is an SSL implementation written
- * by Eric Young (eay@cryptsoft.com).
- * The implementation was written so as to conform with Netscapes SSL.
- * 
- * This library is free for commercial and non-commercial use as long as
- * the following conditions are aheared to.  The following conditions
- * apply to all code found in this distribution, be it the RC4, RSA,
- * lhash, DES, etc., code; not just the SSL code.  The SSL documentation
- * included with this distribution is covered by the same copyright terms
- * except that the holder is Tim Hudson (tjh@cryptsoft.com).
- * 
- * Copyright remains Eric Young's, and as such any Copyright notices in
- * the code are not to be removed.
- * If this package is used in a product, Eric Young should be given attribution
- * as the author of the parts of the library used.
- * This can be in the form of a textual message at program startup or
- * in documentation (online or textual) provided with the package.
- * 
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions
- * are met:
- * 1. Redistributions of source code must retain the copyright
- *    notice, this list of conditions and the following disclaimer.
- * 2. Redistributions in binary form must reproduce the above copyright
- *    notice, this list of conditions and the following disclaimer in the
- *    documentation and/or other materials provided with the distribution.
- * 3. All advertising materials mentioning features or use of this software
- *    must display the following acknowledgement:
- *    "This product includes cryptographic software written by
- *     Eric Young (eay@cryptsoft.com)"
- *    The word 'cryptographic' can be left out if the rouines from the library
- *    being used are not cryptographic related :-).
- * 4. If you include any Windows specific code (or a derivative thereof) from 
- *    the apps directory (application code) you must include an acknowledgement:
- *    "This product includes software written by Tim Hudson (tjh@cryptsoft.com)"
- * 
- * THIS SOFTWARE IS PROVIDED BY ERIC YOUNG ``AS IS'' AND
- * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
- * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
- * ARE DISCLAIMED.  IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE
- * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
- * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
- * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
- * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
- * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
- * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
- * SUCH DAMAGE.
- * 
- * The licence and distribution terms for any publically available version or
- * derivative of this code cannot be changed.  i.e. this code cannot simply be
- * copied and put under another distribution licence
- * [including the GNU Public Licence.]
- */
-
-#include <stdio.h>
-#include "cryptlib.h"
-#include <openssl/bn.h>
-#include <openssl/err.h>
-#include <openssl/objects.h>
-#include <openssl/evp.h>
-#include <openssl/asn1_mac.h>
-#include <openssl/x509.h>
-#ifndef OPENSSL_NO_RSA
-#include <openssl/rsa.h>
-#endif
-#ifndef OPENSSL_NO_DSA
-#include <openssl/dsa.h>
-#endif
-#ifndef OPENSSL_NO_DH
-#include <openssl/dh.h>
-#endif
-
-static void EVP_PKEY_free_it(EVP_PKEY *x);
-
-int EVP_PKEY_bits(EVP_PKEY *pkey)
-	{
-	if (0)
-		return 0;
-#ifndef OPENSSL_NO_RSA
-	else if (pkey->type == EVP_PKEY_RSA)
-		return(BN_num_bits(pkey->pkey.rsa->n));
-#endif
-#ifndef OPENSSL_NO_DSA
-	else if (pkey->type == EVP_PKEY_DSA)
-		return(BN_num_bits(pkey->pkey.dsa->p));
-#endif
-#ifndef OPENSSL_NO_EC
-	else if (pkey->type == EVP_PKEY_EC)
-		{
-		BIGNUM *order = BN_new();
-		const EC_GROUP *group;
-		int ret;
-
-		if (!order)
-			{
-			ERR_clear_error();
-			return 0;
-			}
-		group = EC_KEY_get0_group(pkey->pkey.ec);
-		if (!EC_GROUP_get_order(group, order, NULL))
-			{
-			ERR_clear_error();
-			return 0;
-			}
-
-		ret = BN_num_bits(order);
-		BN_free(order);
-		return ret;
-		}
-#endif
-	return(0);
-	}
-
-int EVP_PKEY_size(EVP_PKEY *pkey)
-	{
-	if (pkey == NULL)
-		return(0);
-#ifndef OPENSSL_NO_RSA
-	if (pkey->type == EVP_PKEY_RSA)
-		return(RSA_size(pkey->pkey.rsa));
-	else
-#endif
-#ifndef OPENSSL_NO_DSA
-		if (pkey->type == EVP_PKEY_DSA)
-		return(DSA_size(pkey->pkey.dsa));
-#endif
-#ifndef OPENSSL_NO_ECDSA
-		if (pkey->type == EVP_PKEY_EC)
-		return(ECDSA_size(pkey->pkey.ec));
-#endif
-
-	return(0);
-	}
-
-int EVP_PKEY_save_parameters(EVP_PKEY *pkey, int mode)
-	{
-#ifndef OPENSSL_NO_DSA
-	if (pkey->type == EVP_PKEY_DSA)
-		{
-		int ret=pkey->save_parameters;
-
-		if (mode >= 0)
-			pkey->save_parameters=mode;
-		return(ret);
-		}
-#endif
-#ifndef OPENSSL_NO_EC
-	if (pkey->type == EVP_PKEY_EC)
-		{
-		int ret = pkey->save_parameters;
-
-		if (mode >= 0)
-			pkey->save_parameters = mode;
-		return(ret);
-		}
-#endif
-	return(0);
-	}
-
-int EVP_PKEY_copy_parameters(EVP_PKEY *to, const EVP_PKEY *from)
-	{
-	if (to->type != from->type)
-		{
-		EVPerr(EVP_F_EVP_PKEY_COPY_PARAMETERS,EVP_R_DIFFERENT_KEY_TYPES);
-		goto err;
-		}
-
-	if (EVP_PKEY_missing_parameters(from))
-		{
-		EVPerr(EVP_F_EVP_PKEY_COPY_PARAMETERS,EVP_R_MISSING_PARAMETERS);
-		goto err;
-		}
-#ifndef OPENSSL_NO_DSA
-	if (to->type == EVP_PKEY_DSA)
-		{
-		BIGNUM *a;
-
-		if ((a=BN_dup(from->pkey.dsa->p)) == NULL) goto err;
-		if (to->pkey.dsa->p != NULL) BN_free(to->pkey.dsa->p);
-		to->pkey.dsa->p=a;
-
-		if ((a=BN_dup(from->pkey.dsa->q)) == NULL) goto err;
-		if (to->pkey.dsa->q != NULL) BN_free(to->pkey.dsa->q);
-		to->pkey.dsa->q=a;
-
-		if ((a=BN_dup(from->pkey.dsa->g)) == NULL) goto err;
-		if (to->pkey.dsa->g != NULL) BN_free(to->pkey.dsa->g);
-		to->pkey.dsa->g=a;
-		}
-#endif
-#ifndef OPENSSL_NO_EC
-	if (to->type == EVP_PKEY_EC)
-		{
-		EC_GROUP *group = EC_GROUP_dup(EC_KEY_get0_group(from->pkey.ec));
-		if (group == NULL)
-			goto err;
-		if (EC_KEY_set_group(to->pkey.ec, group) == 0)
-			goto err;
-		EC_GROUP_free(group);
-		}
-#endif
-	return(1);
-err:
-	return(0);
-	}
-
-int EVP_PKEY_missing_parameters(const EVP_PKEY *pkey)
-	{
-#ifndef OPENSSL_NO_DSA
-	if (pkey->type == EVP_PKEY_DSA)
-		{
-		DSA *dsa;
-
-		dsa=pkey->pkey.dsa;
-		if ((dsa->p == NULL) || (dsa->q == NULL) || (dsa->g == NULL))
-			return(1);
-		}
-#endif
-#ifndef OPENSSL_NO_EC
-	if (pkey->type == EVP_PKEY_EC)
-		{
-		if (EC_KEY_get0_group(pkey->pkey.ec) == NULL)
-			return(1);
-		}
-#endif
-
-	return(0);
-	}
-
-int EVP_PKEY_cmp_parameters(const EVP_PKEY *a, const EVP_PKEY *b)
-	{
-#ifndef OPENSSL_NO_DSA
-	if ((a->type == EVP_PKEY_DSA) && (b->type == EVP_PKEY_DSA))
-		{
-		if (	BN_cmp(a->pkey.dsa->p,b->pkey.dsa->p) ||
-			BN_cmp(a->pkey.dsa->q,b->pkey.dsa->q) ||
-			BN_cmp(a->pkey.dsa->g,b->pkey.dsa->g))
-			return(0);
-		else
-			return(1);
-		}
-#endif
-#ifndef OPENSSL_NO_EC
-	if (a->type == EVP_PKEY_EC && b->type == EVP_PKEY_EC)
-		{
-		const EC_GROUP *group_a = EC_KEY_get0_group(a->pkey.ec),
-		               *group_b = EC_KEY_get0_group(b->pkey.ec);
-		if (EC_GROUP_cmp(group_a, group_b, NULL))
-			return 0;
-		else
-			return 1;
-		}
-#endif
-	return(-1);
-	}
-
-int EVP_PKEY_cmp(const EVP_PKEY *a, const EVP_PKEY *b)
-	{
-	if (a->type != b->type)
-		return -1;
-
-	if (EVP_PKEY_cmp_parameters(a, b) == 0)
-		return 0;
-
-	switch (a->type)
-		{
-#ifndef OPENSSL_NO_RSA
-	case EVP_PKEY_RSA:
-		if (BN_cmp(b->pkey.rsa->n,a->pkey.rsa->n) != 0
-			|| BN_cmp(b->pkey.rsa->e,a->pkey.rsa->e) != 0)
-			return 0;
-		break;
-#endif
-#ifndef OPENSSL_NO_DSA
-	case EVP_PKEY_DSA:
-		if (BN_cmp(b->pkey.dsa->pub_key,a->pkey.dsa->pub_key) != 0)
-			return 0;
-		break;
-#endif
-#ifndef OPENSSL_NO_EC
-	case EVP_PKEY_EC:
-		{
-		int  r;
-		const EC_GROUP *group = EC_KEY_get0_group(b->pkey.ec);
-		const EC_POINT *pa = EC_KEY_get0_public_key(a->pkey.ec),
-		               *pb = EC_KEY_get0_public_key(b->pkey.ec);
-		r = EC_POINT_cmp(group, pa, pb, NULL);
-		if (r != 0)
-			{
-			if (r == 1)
-				return 0;
-			else
-				return -2;
-			}
-		}
- 		break;
-#endif
-#ifndef OPENSSL_NO_DH
-	case EVP_PKEY_DH:
-		return -2;
-#endif
-	default:
-		return -2;
-		}
-
-	return 1;
-	}
-
-EVP_PKEY *EVP_PKEY_new(void)
-	{
-	EVP_PKEY *ret;
-
-	ret=(EVP_PKEY *)OPENSSL_malloc(sizeof(EVP_PKEY));
-	if (ret == NULL)
-		{
-		EVPerr(EVP_F_EVP_PKEY_NEW,ERR_R_MALLOC_FAILURE);
-		return(NULL);
-		}
-	ret->type=EVP_PKEY_NONE;
-	ret->references=1;
-	ret->pkey.ptr=NULL;
-	ret->attributes=NULL;
-	ret->save_parameters=1;
-	return(ret);
-	}
-
-int EVP_PKEY_assign(EVP_PKEY *pkey, int type, char *key)
-	{
-	if (pkey == NULL) return(0);
-	if (pkey->pkey.ptr != NULL)
-		EVP_PKEY_free_it(pkey);
-	pkey->type=EVP_PKEY_type(type);
-	pkey->save_type=type;
-	pkey->pkey.ptr=key;
-	return(key != NULL);
-	}
-
-#ifndef OPENSSL_NO_RSA
-int EVP_PKEY_set1_RSA(EVP_PKEY *pkey, RSA *key)
-{
-	int ret = EVP_PKEY_assign_RSA(pkey, key);
-	if(ret)
-		RSA_up_ref(key);
-	return ret;
-}
-
-RSA *EVP_PKEY_get1_RSA(EVP_PKEY *pkey)
-	{
-	if(pkey->type != EVP_PKEY_RSA) {
-		EVPerr(EVP_F_EVP_PKEY_GET1_RSA, EVP_R_EXPECTING_AN_RSA_KEY);
-		return NULL;
-	}
-	RSA_up_ref(pkey->pkey.rsa);
-	return pkey->pkey.rsa;
-}
-#endif
-
-#ifndef OPENSSL_NO_DSA
-int EVP_PKEY_set1_DSA(EVP_PKEY *pkey, DSA *key)
-{
-	int ret = EVP_PKEY_assign_DSA(pkey, key);
-	if(ret)
-		DSA_up_ref(key);
-	return ret;
-}
-
-DSA *EVP_PKEY_get1_DSA(EVP_PKEY *pkey)
-	{
-	if(pkey->type != EVP_PKEY_DSA) {
-		EVPerr(EVP_F_EVP_PKEY_GET1_DSA, EVP_R_EXPECTING_A_DSA_KEY);
-		return NULL;
-	}
-	DSA_up_ref(pkey->pkey.dsa);
-	return pkey->pkey.dsa;
-}
-#endif
-
-#ifndef OPENSSL_NO_EC
-
-int EVP_PKEY_set1_EC_KEY(EVP_PKEY *pkey, EC_KEY *key)
-{
-	int ret = EVP_PKEY_assign_EC_KEY(pkey,key);
-	if (ret)
-		EC_KEY_up_ref(key);
-	return ret;
-}
-
-EC_KEY *EVP_PKEY_get1_EC_KEY(EVP_PKEY *pkey)
-{
-	if (pkey->type != EVP_PKEY_EC)
-	{
-		EVPerr(EVP_F_EVP_PKEY_GET1_EC_KEY, EVP_R_EXPECTING_A_EC_KEY);
-		return NULL;
-	}
-	EC_KEY_up_ref(pkey->pkey.ec);
-	return pkey->pkey.ec;
-}
-#endif
-
-
-#ifndef OPENSSL_NO_DH
-
-int EVP_PKEY_set1_DH(EVP_PKEY *pkey, DH *key)
-{
-	int ret = EVP_PKEY_assign_DH(pkey, key);
-	if(ret)
-		DH_up_ref(key);
-	return ret;
-}
-
-DH *EVP_PKEY_get1_DH(EVP_PKEY *pkey)
-	{
-	if(pkey->type != EVP_PKEY_DH) {
-		EVPerr(EVP_F_EVP_PKEY_GET1_DH, EVP_R_EXPECTING_A_DH_KEY);
-		return NULL;
-	}
-	DH_up_ref(pkey->pkey.dh);
-	return pkey->pkey.dh;
-}
-#endif
-
-int EVP_PKEY_type(int type)
-	{
-	switch (type)
-		{
-	case EVP_PKEY_RSA:
-	case EVP_PKEY_RSA2:
-		return(EVP_PKEY_RSA);
-	case EVP_PKEY_DSA:
-	case EVP_PKEY_DSA1:
-	case EVP_PKEY_DSA2:
-	case EVP_PKEY_DSA3:
-	case EVP_PKEY_DSA4:
-		return(EVP_PKEY_DSA);
-	case EVP_PKEY_DH:
-		return(EVP_PKEY_DH);
-	case EVP_PKEY_EC:
-		return(EVP_PKEY_EC);
-	default:
-		return(NID_undef);
-		}
-	}
-
-void EVP_PKEY_free(EVP_PKEY *x)
-	{
-	int i;
-
-	if (x == NULL) return;
-
-	i=CRYPTO_add(&x->references,-1,CRYPTO_LOCK_EVP_PKEY);
-#ifdef REF_PRINT
-	REF_PRINT("EVP_PKEY",x);
-#endif
-	if (i > 0) return;
-#ifdef REF_CHECK
-	if (i < 0)
-		{
-		fprintf(stderr,"EVP_PKEY_free, bad reference count\n");
-		abort();
-		}
-#endif
-	EVP_PKEY_free_it(x);
-	if (x->attributes)
-		sk_X509_ATTRIBUTE_pop_free(x->attributes, X509_ATTRIBUTE_free);
-	OPENSSL_free(x);
-	}
-
-static void EVP_PKEY_free_it(EVP_PKEY *x)
-	{
-	switch (x->type)
-		{
-#ifndef OPENSSL_NO_RSA
-	case EVP_PKEY_RSA:
-	case EVP_PKEY_RSA2:
-		RSA_free(x->pkey.rsa);
-		break;
-#endif
-#ifndef OPENSSL_NO_DSA
-	case EVP_PKEY_DSA:
-	case EVP_PKEY_DSA2:
-	case EVP_PKEY_DSA3:
-	case EVP_PKEY_DSA4:
-		DSA_free(x->pkey.dsa);
-		break;
-#endif
-#ifndef OPENSSL_NO_EC
-	case EVP_PKEY_EC:
-		EC_KEY_free(x->pkey.ec);
-		break;
-#endif
-#ifndef OPENSSL_NO_DH
-	case EVP_PKEY_DH:
-		DH_free(x->pkey.dh);
-		break;
-#endif
-		}
-	}
-
diff --git a/crypto/openssl/crypto/evp/p_open.c b/crypto/openssl/crypto/evp/p_open.c
deleted file mode 100644
index 9935206d0f3d..000000000000
--- a/crypto/openssl/crypto/evp/p_open.c
+++ /dev/null
@@ -1,127 +0,0 @@
-/* crypto/evp/p_open.c */
-/* Copyright (C) 1995-1998 Eric Young (eay@cryptsoft.com)
- * All rights reserved.
- *
- * This package is an SSL implementation written
- * by Eric Young (eay@cryptsoft.com).
- * The implementation was written so as to conform with Netscapes SSL.
- * 
- * This library is free for commercial and non-commercial use as long as
- * the following conditions are aheared to.  The following conditions
- * apply to all code found in this distribution, be it the RC4, RSA,
- * lhash, DES, etc., code; not just the SSL code.  The SSL documentation
- * included with this distribution is covered by the same copyright terms
- * except that the holder is Tim Hudson (tjh@cryptsoft.com).
- * 
- * Copyright remains Eric Young's, and as such any Copyright notices in
- * the code are not to be removed.
- * If this package is used in a product, Eric Young should be given attribution
- * as the author of the parts of the library used.
- * This can be in the form of a textual message at program startup or
- * in documentation (online or textual) provided with the package.
- * 
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions
- * are met:
- * 1. Redistributions of source code must retain the copyright
- *    notice, this list of conditions and the following disclaimer.
- * 2. Redistributions in binary form must reproduce the above copyright
- *    notice, this list of conditions and the following disclaimer in the
- *    documentation and/or other materials provided with the distribution.
- * 3. All advertising materials mentioning features or use of this software
- *    must display the following acknowledgement:
- *    "This product includes cryptographic software written by
- *     Eric Young (eay@cryptsoft.com)"
- *    The word 'cryptographic' can be left out if the rouines from the library
- *    being used are not cryptographic related :-).
- * 4. If you include any Windows specific code (or a derivative thereof) from 
- *    the apps directory (application code) you must include an acknowledgement:
- *    "This product includes software written by Tim Hudson (tjh@cryptsoft.com)"
- * 
- * THIS SOFTWARE IS PROVIDED BY ERIC YOUNG ``AS IS'' AND
- * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
- * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
- * ARE DISCLAIMED.  IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE
- * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
- * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
- * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
- * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
- * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
- * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
- * SUCH DAMAGE.
- * 
- * The licence and distribution terms for any publically available version or
- * derivative of this code cannot be changed.  i.e. this code cannot simply be
- * copied and put under another distribution licence
- * [including the GNU Public Licence.]
- */
-
-#include <stdio.h>
-#include "cryptlib.h"
-
-#ifndef OPENSSL_NO_RSA
-
-#include <openssl/evp.h>
-#include <openssl/objects.h>
-#include <openssl/x509.h>
-#include <openssl/rsa.h>
-
-int EVP_OpenInit(EVP_CIPHER_CTX *ctx, const EVP_CIPHER *type,
-	const unsigned char *ek, int ekl, const unsigned char *iv,
-	EVP_PKEY *priv)
-	{
-	unsigned char *key=NULL;
-	int i,size=0,ret=0;
-
-	if(type) {	
-		EVP_CIPHER_CTX_init(ctx);
-		if(!EVP_DecryptInit_ex(ctx,type,NULL, NULL,NULL)) return 0;
-	}
-
-	if(!priv) return 1;
-
-	if (priv->type != EVP_PKEY_RSA)
-		{
-		EVPerr(EVP_F_EVP_OPENINIT,EVP_R_PUBLIC_KEY_NOT_RSA);
-		goto err;
-                }
-
-	size=RSA_size(priv->pkey.rsa);
-	key=(unsigned char *)OPENSSL_malloc(size+2);
-	if (key == NULL)
-		{
-		/* ERROR */
-		EVPerr(EVP_F_EVP_OPENINIT,ERR_R_MALLOC_FAILURE);
-		goto err;
-		}
-
-	i=EVP_PKEY_decrypt(key,ek,ekl,priv);
-	if ((i <= 0) || !EVP_CIPHER_CTX_set_key_length(ctx, i))
-		{
-		/* ERROR */
-		goto err;
-		}
-	if(!EVP_DecryptInit_ex(ctx,NULL,NULL,key,iv)) goto err;
-
-	ret=1;
-err:
-	if (key != NULL) OPENSSL_cleanse(key,size);
-	OPENSSL_free(key);
-	return(ret);
-	}
-
-int EVP_OpenFinal(EVP_CIPHER_CTX *ctx, unsigned char *out, int *outl)
-	{
-	int i;
-
-	i=EVP_DecryptFinal_ex(ctx,out,outl);
-	EVP_DecryptInit_ex(ctx,NULL,NULL,NULL,NULL);
-	return(i);
-	}
-#else /* !OPENSSL_NO_RSA */
-
-# ifdef PEDANTIC
-static void *dummy=&dummy;
-# endif
-
-#endif
diff --git a/crypto/openssl/crypto/evp/p_seal.c b/crypto/openssl/crypto/evp/p_seal.c
deleted file mode 100644
index 8cc8fcb0bd05..000000000000
--- a/crypto/openssl/crypto/evp/p_seal.c
+++ /dev/null
@@ -1,115 +0,0 @@
-/* crypto/evp/p_seal.c */
-/* Copyright (C) 1995-1998 Eric Young (eay@cryptsoft.com)
- * All rights reserved.
- *
- * This package is an SSL implementation written
- * by Eric Young (eay@cryptsoft.com).
- * The implementation was written so as to conform with Netscapes SSL.
- * 
- * This library is free for commercial and non-commercial use as long as
- * the following conditions are aheared to.  The following conditions
- * apply to all code found in this distribution, be it the RC4, RSA,
- * lhash, DES, etc., code; not just the SSL code.  The SSL documentation
- * included with this distribution is covered by the same copyright terms
- * except that the holder is Tim Hudson (tjh@cryptsoft.com).
- * 
- * Copyright remains Eric Young's, and as such any Copyright notices in
- * the code are not to be removed.
- * If this package is used in a product, Eric Young should be given attribution
- * as the author of the parts of the library used.
- * This can be in the form of a textual message at program startup or
- * in documentation (online or textual) provided with the package.
- * 
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions
- * are met:
- * 1. Redistributions of source code must retain the copyright
- *    notice, this list of conditions and the following disclaimer.
- * 2. Redistributions in binary form must reproduce the above copyright
- *    notice, this list of conditions and the following disclaimer in the
- *    documentation and/or other materials provided with the distribution.
- * 3. All advertising materials mentioning features or use of this software
- *    must display the following acknowledgement:
- *    "This product includes cryptographic software written by
- *     Eric Young (eay@cryptsoft.com)"
- *    The word 'cryptographic' can be left out if the rouines from the library
- *    being used are not cryptographic related :-).
- * 4. If you include any Windows specific code (or a derivative thereof) from 
- *    the apps directory (application code) you must include an acknowledgement:
- *    "This product includes software written by Tim Hudson (tjh@cryptsoft.com)"
- * 
- * THIS SOFTWARE IS PROVIDED BY ERIC YOUNG ``AS IS'' AND
- * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
- * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
- * ARE DISCLAIMED.  IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE
- * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
- * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
- * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
- * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
- * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
- * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
- * SUCH DAMAGE.
- * 
- * The licence and distribution terms for any publically available version or
- * derivative of this code cannot be changed.  i.e. this code cannot simply be
- * copied and put under another distribution licence
- * [including the GNU Public Licence.]
- */
-
-#include <stdio.h>
-#include "cryptlib.h"
-#include <openssl/rand.h>
-#ifndef OPENSSL_NO_RSA
-#include <openssl/rsa.h>
-#endif
-#include <openssl/evp.h>
-#include <openssl/objects.h>
-#include <openssl/x509.h>
-
-int EVP_SealInit(EVP_CIPHER_CTX *ctx, const EVP_CIPHER *type, unsigned char **ek,
-	     int *ekl, unsigned char *iv, EVP_PKEY **pubk, int npubk)
-	{
-	unsigned char key[EVP_MAX_KEY_LENGTH];
-	int i;
-	
-	if(type) {
-		EVP_CIPHER_CTX_init(ctx);
-		if(!EVP_EncryptInit_ex(ctx,type,NULL,NULL,NULL)) return 0;
-	}
-	if ((npubk <= 0) || !pubk)
-		return 1;
-	if (EVP_CIPHER_CTX_rand_key(ctx, key) <= 0)
-		return 0;
-	if (EVP_CIPHER_CTX_iv_length(ctx))
-		RAND_pseudo_bytes(iv,EVP_CIPHER_CTX_iv_length(ctx));
-
-	if(!EVP_EncryptInit_ex(ctx,NULL,NULL,key,iv)) return 0;
-
-	for (i=0; i<npubk; i++)
-		{
-		ekl[i]=EVP_PKEY_encrypt(ek[i],key,EVP_CIPHER_CTX_key_length(ctx),
-			pubk[i]);
-		if (ekl[i] <= 0) return(-1);
-		}
-	return(npubk);
-	}
-
-/* MACRO
-void EVP_SealUpdate(ctx,out,outl,in,inl)
-EVP_CIPHER_CTX *ctx;
-unsigned char *out;
-int *outl;
-unsigned char *in;
-int inl;
-	{
-	EVP_EncryptUpdate(ctx,out,outl,in,inl);
-	}
-*/
-
-int EVP_SealFinal(EVP_CIPHER_CTX *ctx, unsigned char *out, int *outl)
-	{
-	int i;
-	i = EVP_EncryptFinal_ex(ctx,out,outl);
-	EVP_EncryptInit_ex(ctx,NULL,NULL,NULL,NULL);
-	return i;
-	}
diff --git a/crypto/openssl/crypto/evp/p_sign.c b/crypto/openssl/crypto/evp/p_sign.c
deleted file mode 100644
index e4ae5906f557..000000000000
--- a/crypto/openssl/crypto/evp/p_sign.c
+++ /dev/null
@@ -1,114 +0,0 @@
-/* crypto/evp/p_sign.c */
-/* Copyright (C) 1995-1998 Eric Young (eay@cryptsoft.com)
- * All rights reserved.
- *
- * This package is an SSL implementation written
- * by Eric Young (eay@cryptsoft.com).
- * The implementation was written so as to conform with Netscapes SSL.
- * 
- * This library is free for commercial and non-commercial use as long as
- * the following conditions are aheared to.  The following conditions
- * apply to all code found in this distribution, be it the RC4, RSA,
- * lhash, DES, etc., code; not just the SSL code.  The SSL documentation
- * included with this distribution is covered by the same copyright terms
- * except that the holder is Tim Hudson (tjh@cryptsoft.com).
- * 
- * Copyright remains Eric Young's, and as such any Copyright notices in
- * the code are not to be removed.
- * If this package is used in a product, Eric Young should be given attribution
- * as the author of the parts of the library used.
- * This can be in the form of a textual message at program startup or
- * in documentation (online or textual) provided with the package.
- * 
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions
- * are met:
- * 1. Redistributions of source code must retain the copyright
- *    notice, this list of conditions and the following disclaimer.
- * 2. Redistributions in binary form must reproduce the above copyright
- *    notice, this list of conditions and the following disclaimer in the
- *    documentation and/or other materials provided with the distribution.
- * 3. All advertising materials mentioning features or use of this software
- *    must display the following acknowledgement:
- *    "This product includes cryptographic software written by
- *     Eric Young (eay@cryptsoft.com)"
- *    The word 'cryptographic' can be left out if the rouines from the library
- *    being used are not cryptographic related :-).
- * 4. If you include any Windows specific code (or a derivative thereof) from 
- *    the apps directory (application code) you must include an acknowledgement:
- *    "This product includes software written by Tim Hudson (tjh@cryptsoft.com)"
- * 
- * THIS SOFTWARE IS PROVIDED BY ERIC YOUNG ``AS IS'' AND
- * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
- * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
- * ARE DISCLAIMED.  IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE
- * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
- * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
- * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
- * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
- * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
- * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
- * SUCH DAMAGE.
- * 
- * The licence and distribution terms for any publically available version or
- * derivative of this code cannot be changed.  i.e. this code cannot simply be
- * copied and put under another distribution licence
- * [including the GNU Public Licence.]
- */
-
-#include <stdio.h>
-#include "cryptlib.h"
-#include <openssl/evp.h>
-#include <openssl/objects.h>
-#include <openssl/x509.h>
-
-#ifdef undef
-void EVP_SignInit(EVP_MD_CTX *ctx, EVP_MD *type)
-	{
-	EVP_DigestInit_ex(ctx,type);
-	}
-
-void EVP_SignUpdate(EVP_MD_CTX *ctx, unsigned char *data,
-	     unsigned int count)
-	{
-	EVP_DigestUpdate(ctx,data,count);
-	}
-#endif
-
-int EVP_SignFinal(EVP_MD_CTX *ctx, unsigned char *sigret, unsigned int *siglen,
-	     EVP_PKEY *pkey)
-	{
-	unsigned char m[EVP_MAX_MD_SIZE];
-	unsigned int m_len;
-	int i,ok=0,v;
-	MS_STATIC EVP_MD_CTX tmp_ctx;
-
-	*siglen=0;
-	EVP_MD_CTX_init(&tmp_ctx);
-	EVP_MD_CTX_copy_ex(&tmp_ctx,ctx);   
-	EVP_DigestFinal_ex(&tmp_ctx,&(m[0]),&m_len);
-	EVP_MD_CTX_cleanup(&tmp_ctx);
-	for (i=0; i<4; i++)
-		{
-		v=ctx->digest->required_pkey_type[i];
-		if (v == 0) break;
-		if (pkey->type == v)
-			{
-			ok=1;
-			break;
-			}
-		}
-	if (!ok)
-		{
-		EVPerr(EVP_F_EVP_SIGNFINAL,EVP_R_WRONG_PUBLIC_KEY_TYPE);
-		return(0);
-		}
-	if (ctx->digest->sign == NULL)
-		{
-		EVPerr(EVP_F_EVP_SIGNFINAL,EVP_R_NO_SIGN_FUNCTION_CONFIGURED);
-		return(0);
-		}
-	return(ctx->digest->sign(ctx->digest->type,m,m_len,sigret,siglen,
-		pkey->pkey.ptr));
-	}
-
diff --git a/crypto/openssl/crypto/evp/p_verify.c b/crypto/openssl/crypto/evp/p_verify.c
deleted file mode 100644
index 21a40a375e1b..000000000000
--- a/crypto/openssl/crypto/evp/p_verify.c
+++ /dev/null
@@ -1,101 +0,0 @@
-/* crypto/evp/p_verify.c */
-/* Copyright (C) 1995-1998 Eric Young (eay@cryptsoft.com)
- * All rights reserved.
- *
- * This package is an SSL implementation written
- * by Eric Young (eay@cryptsoft.com).
- * The implementation was written so as to conform with Netscapes SSL.
- * 
- * This library is free for commercial and non-commercial use as long as
- * the following conditions are aheared to.  The following conditions
- * apply to all code found in this distribution, be it the RC4, RSA,
- * lhash, DES, etc., code; not just the SSL code.  The SSL documentation
- * included with this distribution is covered by the same copyright terms
- * except that the holder is Tim Hudson (tjh@cryptsoft.com).
- * 
- * Copyright remains Eric Young's, and as such any Copyright notices in
- * the code are not to be removed.
- * If this package is used in a product, Eric Young should be given attribution
- * as the author of the parts of the library used.
- * This can be in the form of a textual message at program startup or
- * in documentation (online or textual) provided with the package.
- * 
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions
- * are met:
- * 1. Redistributions of source code must retain the copyright
- *    notice, this list of conditions and the following disclaimer.
- * 2. Redistributions in binary form must reproduce the above copyright
- *    notice, this list of conditions and the following disclaimer in the
- *    documentation and/or other materials provided with the distribution.
- * 3. All advertising materials mentioning features or use of this software
- *    must display the following acknowledgement:
- *    "This product includes cryptographic software written by
- *     Eric Young (eay@cryptsoft.com)"
- *    The word 'cryptographic' can be left out if the rouines from the library
- *    being used are not cryptographic related :-).
- * 4. If you include any Windows specific code (or a derivative thereof) from 
- *    the apps directory (application code) you must include an acknowledgement:
- *    "This product includes software written by Tim Hudson (tjh@cryptsoft.com)"
- * 
- * THIS SOFTWARE IS PROVIDED BY ERIC YOUNG ``AS IS'' AND
- * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
- * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
- * ARE DISCLAIMED.  IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE
- * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
- * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
- * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
- * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
- * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
- * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
- * SUCH DAMAGE.
- * 
- * The licence and distribution terms for any publically available version or
- * derivative of this code cannot be changed.  i.e. this code cannot simply be
- * copied and put under another distribution licence
- * [including the GNU Public Licence.]
- */
-
-#include <stdio.h>
-#include "cryptlib.h"
-#include <openssl/evp.h>
-#include <openssl/objects.h>
-#include <openssl/x509.h>
-
-int EVP_VerifyFinal(EVP_MD_CTX *ctx, const unsigned char *sigbuf,
-	     unsigned int siglen, EVP_PKEY *pkey)
-	{
-	unsigned char m[EVP_MAX_MD_SIZE];
-	unsigned int m_len;
-	int i,ok=0,v;
-	MS_STATIC EVP_MD_CTX tmp_ctx;
-
-	for (i=0; i<4; i++)
-		{
-		v=ctx->digest->required_pkey_type[i];
-		if (v == 0) break;
-		if (pkey->type == v)
-			{
-			ok=1;
-			break;
-			}
-		}
-	if (!ok)
-		{
-		EVPerr(EVP_F_EVP_VERIFYFINAL,EVP_R_WRONG_PUBLIC_KEY_TYPE);
-		return(-1);
-		}
-	EVP_MD_CTX_init(&tmp_ctx);
-	EVP_MD_CTX_copy_ex(&tmp_ctx,ctx);     
-	EVP_DigestFinal_ex(&tmp_ctx,&(m[0]),&m_len);
-	EVP_MD_CTX_cleanup(&tmp_ctx);
-        if (ctx->digest->verify == NULL)
-                {
-		EVPerr(EVP_F_EVP_VERIFYFINAL,EVP_R_NO_VERIFY_FUNCTION_CONFIGURED);
-		return(0);
-		}
-
-	return(ctx->digest->verify(ctx->digest->type,m,m_len,
-		sigbuf,siglen,pkey->pkey.ptr));
-	}
-
diff --git a/crypto/openssl/crypto/ex_data.c b/crypto/openssl/crypto/ex_data.c
deleted file mode 100644
index 8914218fe8f9..000000000000
--- a/crypto/openssl/crypto/ex_data.c
+++ /dev/null
@@ -1,632 +0,0 @@
-/* crypto/ex_data.c */
-
-/*
- * Overhaul notes;
- *
- * This code is now *mostly* thread-safe. It is now easier to understand in what
- * ways it is safe and in what ways it is not, which is an improvement. Firstly,
- * all per-class stacks and index-counters for ex_data are stored in the same
- * global LHASH table (keyed by class). This hash table uses locking for all
- * access with the exception of CRYPTO_cleanup_all_ex_data(), which must only be
- * called when no other threads can possibly race against it (even if it was
- * locked, the race would mean it's possible the hash table might have been
- * recreated after the cleanup). As classes can only be added to the hash table,
- * and within each class, the stack of methods can only be incremented, the
- * locking mechanics are simpler than they would otherwise be. For example, the
- * new/dup/free ex_data functions will lock the hash table, copy the method
- * pointers it needs from the relevant class, then unlock the hash table before
- * actually applying those method pointers to the task of the new/dup/free
- * operations. As they can't be removed from the method-stack, only
- * supplemented, there's no race conditions associated with using them outside
- * the lock. The get/set_ex_data functions are not locked because they do not
- * involve this global state at all - they operate directly with a previously
- * obtained per-class method index and a particular "ex_data" variable. These
- * variables are usually instantiated per-context (eg. each RSA structure has
- * one) so locking on read/write access to that variable can be locked locally
- * if required (eg. using the "RSA" lock to synchronise access to a
- * per-RSA-structure ex_data variable if required).
- * [Geoff]
- */
-
-/* Copyright (C) 1995-1998 Eric Young (eay@cryptsoft.com)
- * All rights reserved.
- *
- * This package is an SSL implementation written
- * by Eric Young (eay@cryptsoft.com).
- * The implementation was written so as to conform with Netscapes SSL.
- * 
- * This library is free for commercial and non-commercial use as long as
- * the following conditions are aheared to.  The following conditions
- * apply to all code found in this distribution, be it the RC4, RSA,
- * lhash, DES, etc., code; not just the SSL code.  The SSL documentation
- * included with this distribution is covered by the same copyright terms
- * except that the holder is Tim Hudson (tjh@cryptsoft.com).
- * 
- * Copyright remains Eric Young's, and as such any Copyright notices in
- * the code are not to be removed.
- * If this package is used in a product, Eric Young should be given attribution
- * as the author of the parts of the library used.
- * This can be in the form of a textual message at program startup or
- * in documentation (online or textual) provided with the package.
- * 
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions
- * are met:
- * 1. Redistributions of source code must retain the copyright
- *    notice, this list of conditions and the following disclaimer.
- * 2. Redistributions in binary form must reproduce the above copyright
- *    notice, this list of conditions and the following disclaimer in the
- *    documentation and/or other materials provided with the distribution.
- * 3. All advertising materials mentioning features or use of this software
- *    must display the following acknowledgement:
- *    "This product includes cryptographic software written by
- *     Eric Young (eay@cryptsoft.com)"
- *    The word 'cryptographic' can be left out if the rouines from the library
- *    being used are not cryptographic related :-).
- * 4. If you include any Windows specific code (or a derivative thereof) from 
- *    the apps directory (application code) you must include an acknowledgement:
- *    "This product includes software written by Tim Hudson (tjh@cryptsoft.com)"
- * 
- * THIS SOFTWARE IS PROVIDED BY ERIC YOUNG ``AS IS'' AND
- * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
- * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
- * ARE DISCLAIMED.  IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE
- * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
- * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
- * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
- * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
- * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
- * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
- * SUCH DAMAGE.
- * 
- * The licence and distribution terms for any publically available version or
- * derivative of this code cannot be changed.  i.e. this code cannot simply be
- * copied and put under another distribution licence
- * [including the GNU Public Licence.]
- */
-/* ====================================================================
- * Copyright (c) 1998-2001 The OpenSSL Project.  All rights reserved.
- *
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions
- * are met:
- *
- * 1. Redistributions of source code must retain the above copyright
- *    notice, this list of conditions and the following disclaimer. 
- *
- * 2. Redistributions in binary form must reproduce the above copyright
- *    notice, this list of conditions and the following disclaimer in
- *    the documentation and/or other materials provided with the
- *    distribution.
- *
- * 3. All advertising materials mentioning features or use of this
- *    software must display the following acknowledgment:
- *    "This product includes software developed by the OpenSSL Project
- *    for use in the OpenSSL Toolkit. (http://www.openssl.org/)"
- *
- * 4. The names "OpenSSL Toolkit" and "OpenSSL Project" must not be used to
- *    endorse or promote products derived from this software without
- *    prior written permission. For written permission, please contact
- *    openssl-core@openssl.org.
- *
- * 5. Products derived from this software may not be called "OpenSSL"
- *    nor may "OpenSSL" appear in their names without prior written
- *    permission of the OpenSSL Project.
- *
- * 6. Redistributions of any form whatsoever must retain the following
- *    acknowledgment:
- *    "This product includes software developed by the OpenSSL Project
- *    for use in the OpenSSL Toolkit (http://www.openssl.org/)"
- *
- * THIS SOFTWARE IS PROVIDED BY THE OpenSSL PROJECT ``AS IS'' AND ANY
- * EXPRESSED OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
- * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR
- * PURPOSE ARE DISCLAIMED.  IN NO EVENT SHALL THE OpenSSL PROJECT OR
- * ITS CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
- * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
- * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
- * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
- * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
- * STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
- * ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED
- * OF THE POSSIBILITY OF SUCH DAMAGE.
- * ====================================================================
- *
- * This product includes cryptographic software written by Eric Young
- * (eay@cryptsoft.com).  This product includes software written by Tim
- * Hudson (tjh@cryptsoft.com).
- *
- */
-
-#include "cryptlib.h"
-#include <openssl/lhash.h>
-
-/* What an "implementation of ex_data functionality" looks like */
-struct st_CRYPTO_EX_DATA_IMPL
-	{
-	/*********************/
-	/* GLOBAL OPERATIONS */
-	/* Return a new class index */
-	int (*cb_new_class)(void);
-	/* Cleanup all state used by the implementation */
-	void (*cb_cleanup)(void);
-	/************************/
-	/* PER-CLASS OPERATIONS */
-	/* Get a new method index within a class */
-	int (*cb_get_new_index)(int class_index, long argl, void *argp,
-			CRYPTO_EX_new *new_func, CRYPTO_EX_dup *dup_func,
-			CRYPTO_EX_free *free_func);
-	/* Initialise a new CRYPTO_EX_DATA of a given class */
-	int (*cb_new_ex_data)(int class_index, void *obj,
-			CRYPTO_EX_DATA *ad);
-	/* Duplicate a CRYPTO_EX_DATA of a given class onto a copy */
-	int (*cb_dup_ex_data)(int class_index, CRYPTO_EX_DATA *to,
-			CRYPTO_EX_DATA *from);
-	/* Cleanup a CRYPTO_EX_DATA of a given class */
-	void (*cb_free_ex_data)(int class_index, void *obj,
-			CRYPTO_EX_DATA *ad);
-	};
-
-/* The implementation we use at run-time */
-static const CRYPTO_EX_DATA_IMPL *impl = NULL;
-
-/* To call "impl" functions, use this macro rather than referring to 'impl' directly, eg.
- * EX_IMPL(get_new_index)(...); */
-#define EX_IMPL(a) impl->cb_##a
-
-/* Predeclare the "default" ex_data implementation */
-static int int_new_class(void);
-static void int_cleanup(void);
-static int int_get_new_index(int class_index, long argl, void *argp,
-		CRYPTO_EX_new *new_func, CRYPTO_EX_dup *dup_func,
-		CRYPTO_EX_free *free_func);
-static int int_new_ex_data(int class_index, void *obj,
-		CRYPTO_EX_DATA *ad);
-static int int_dup_ex_data(int class_index, CRYPTO_EX_DATA *to,
-		CRYPTO_EX_DATA *from);
-static void int_free_ex_data(int class_index, void *obj,
-		CRYPTO_EX_DATA *ad);
-static CRYPTO_EX_DATA_IMPL impl_default =
-	{
-	int_new_class,
-	int_cleanup,
-	int_get_new_index,
-	int_new_ex_data,
-	int_dup_ex_data,
-	int_free_ex_data
-	};
-
-/* Internal function that checks whether "impl" is set and if not, sets it to
- * the default. */
-static void impl_check(void)
-	{
-	CRYPTO_w_lock(CRYPTO_LOCK_EX_DATA);
-	if(!impl)
-		impl = &impl_default;
-	CRYPTO_w_unlock(CRYPTO_LOCK_EX_DATA);
-	}
-/* A macro wrapper for impl_check that first uses a non-locked test before
- * invoking the function (which checks again inside a lock). */
-#define IMPL_CHECK if(!impl) impl_check();
-
-/* API functions to get/set the "ex_data" implementation */
-const CRYPTO_EX_DATA_IMPL *CRYPTO_get_ex_data_implementation(void)
-	{
-	IMPL_CHECK
-	return impl;
-	}
-int CRYPTO_set_ex_data_implementation(const CRYPTO_EX_DATA_IMPL *i)
-	{
-	int toret = 0;
-	CRYPTO_w_lock(CRYPTO_LOCK_EX_DATA);
-	if(!impl)
-		{
-		impl = i;
-		toret = 1;
-		}
-	CRYPTO_w_unlock(CRYPTO_LOCK_EX_DATA);
-	return toret;
-	}
-
-/****************************************************************************/
-/* Interal (default) implementation of "ex_data" support. API functions are
- * further down. */
-
-/* The type that represents what each "class" used to implement locally. A STACK
- * of CRYPTO_EX_DATA_FUNCS plus a index-counter. The 'class_index' is the global
- * value representing the class that is used to distinguish these items. */
-typedef struct st_ex_class_item {
-	int class_index;
-	STACK_OF(CRYPTO_EX_DATA_FUNCS) *meth;
-	int meth_num;
-} EX_CLASS_ITEM;
-
-/* When assigning new class indexes, this is our counter */
-static int ex_class = CRYPTO_EX_INDEX_USER;
-
-/* The global hash table of EX_CLASS_ITEM items */
-static LHASH *ex_data = NULL;
-
-/* The callbacks required in the "ex_data" hash table */
-static unsigned long ex_hash_cb(const void *a_void)
-	{
-	return ((const EX_CLASS_ITEM *)a_void)->class_index;
-	}
-static int ex_cmp_cb(const void *a_void, const void *b_void)
-	{
-	return (((const EX_CLASS_ITEM *)a_void)->class_index -
-		((const EX_CLASS_ITEM *)b_void)->class_index);
-	}
-
-/* Internal functions used by the "impl_default" implementation to access the
- * state */
-
-static int ex_data_check(void)
-	{
-	int toret = 1;
-	CRYPTO_w_lock(CRYPTO_LOCK_EX_DATA);
-	if(!ex_data && ((ex_data = lh_new(ex_hash_cb, ex_cmp_cb)) == NULL))
-		toret = 0;
-	CRYPTO_w_unlock(CRYPTO_LOCK_EX_DATA);
-	return toret;
-	}
-/* This macros helps reduce the locking from repeated checks because the
- * ex_data_check() function checks ex_data again inside a lock. */
-#define EX_DATA_CHECK(iffail) if(!ex_data && !ex_data_check()) {iffail}
-
-/* This "inner" callback is used by the callback function that follows it */
-static void def_cleanup_util_cb(CRYPTO_EX_DATA_FUNCS *funcs)
-	{
-	OPENSSL_free(funcs);
-	}
-
-/* This callback is used in lh_doall to destroy all EX_CLASS_ITEM values from
- * "ex_data" prior to the ex_data hash table being itself destroyed. Doesn't do
- * any locking. */
-static void def_cleanup_cb(void *a_void)
-	{
-	EX_CLASS_ITEM *item = (EX_CLASS_ITEM *)a_void;
-	sk_CRYPTO_EX_DATA_FUNCS_pop_free(item->meth, def_cleanup_util_cb);
-	OPENSSL_free(item);
-	}
-
-/* Return the EX_CLASS_ITEM from the "ex_data" hash table that corresponds to a
- * given class. Handles locking. */
-static EX_CLASS_ITEM *def_get_class(int class_index)
-	{
-	EX_CLASS_ITEM d, *p, *gen;
-	EX_DATA_CHECK(return NULL;)
-	d.class_index = class_index;
-	CRYPTO_w_lock(CRYPTO_LOCK_EX_DATA);
-	p = lh_retrieve(ex_data, &d);
-	if(!p)
-		{
-		gen = OPENSSL_malloc(sizeof(EX_CLASS_ITEM));
-		if(gen)
-			{
-			gen->class_index = class_index;
-			gen->meth_num = 0;
-			gen->meth = sk_CRYPTO_EX_DATA_FUNCS_new_null();
-			if(!gen->meth)
-				OPENSSL_free(gen);
-			else
-				{
-				/* Because we're inside the ex_data lock, the
-				 * return value from the insert will be NULL */
-				lh_insert(ex_data, gen);
-				p = gen;
-				}
-			}
-		}
-	CRYPTO_w_unlock(CRYPTO_LOCK_EX_DATA);
-	if(!p)
-		CRYPTOerr(CRYPTO_F_DEF_GET_CLASS,ERR_R_MALLOC_FAILURE);
-	return p;
-	}
-
-/* Add a new method to the given EX_CLASS_ITEM and return the corresponding
- * index (or -1 for error). Handles locking. */
-static int def_add_index(EX_CLASS_ITEM *item, long argl, void *argp,
-		CRYPTO_EX_new *new_func, CRYPTO_EX_dup *dup_func,
-		CRYPTO_EX_free *free_func)
-	{
-	int toret = -1;
-	CRYPTO_EX_DATA_FUNCS *a = (CRYPTO_EX_DATA_FUNCS *)OPENSSL_malloc(
-					sizeof(CRYPTO_EX_DATA_FUNCS));
-	if(!a)
-		{
-		CRYPTOerr(CRYPTO_F_DEF_ADD_INDEX,ERR_R_MALLOC_FAILURE);
-		return -1;
-		}
-	a->argl=argl;
-	a->argp=argp;
-	a->new_func=new_func;
-	a->dup_func=dup_func;
-	a->free_func=free_func;
-	CRYPTO_w_lock(CRYPTO_LOCK_EX_DATA);
-	while (sk_CRYPTO_EX_DATA_FUNCS_num(item->meth) <= item->meth_num)
-		{
-		if (!sk_CRYPTO_EX_DATA_FUNCS_push(item->meth, NULL))
-			{
-			CRYPTOerr(CRYPTO_F_DEF_ADD_INDEX,ERR_R_MALLOC_FAILURE);
-			OPENSSL_free(a);
-			goto err;
-			}
-		}
-	toret = item->meth_num++;
-	sk_CRYPTO_EX_DATA_FUNCS_set(item->meth, toret, a);
-err:
-	CRYPTO_w_unlock(CRYPTO_LOCK_EX_DATA);
-	return toret;
-	}
-
-/**************************************************************/
-/* The functions in the default CRYPTO_EX_DATA_IMPL structure */
-
-static int int_new_class(void)
-	{
-	int toret;
-	CRYPTO_w_lock(CRYPTO_LOCK_EX_DATA);
-	toret = ex_class++;
-	CRYPTO_w_unlock(CRYPTO_LOCK_EX_DATA);
-	return toret;
-	}
-
-static void int_cleanup(void)
-	{
-	EX_DATA_CHECK(return;)
-	lh_doall(ex_data, def_cleanup_cb);
-	lh_free(ex_data);
-	ex_data = NULL;
-	impl = NULL;
-	}
-
-static int int_get_new_index(int class_index, long argl, void *argp,
-		CRYPTO_EX_new *new_func, CRYPTO_EX_dup *dup_func,
-		CRYPTO_EX_free *free_func)
-	{
-	EX_CLASS_ITEM *item = def_get_class(class_index);
-	if(!item)
-		return -1;
-	return def_add_index(item, argl, argp, new_func, dup_func, free_func);
-	}
-
-/* Thread-safe by copying a class's array of "CRYPTO_EX_DATA_FUNCS" entries in
- * the lock, then using them outside the lock. NB: Thread-safety only applies to
- * the global "ex_data" state (ie. class definitions), not thread-safe on 'ad'
- * itself. */
-static int int_new_ex_data(int class_index, void *obj,
-		CRYPTO_EX_DATA *ad)
-	{
-	int mx,i;
-	void *ptr;
-	CRYPTO_EX_DATA_FUNCS **storage = NULL;
-	EX_CLASS_ITEM *item = def_get_class(class_index);
-	if(!item)
-		/* error is already set */
-		return 0;
-	ad->sk = NULL;
-	CRYPTO_r_lock(CRYPTO_LOCK_EX_DATA);
-	mx = sk_CRYPTO_EX_DATA_FUNCS_num(item->meth);
-	if(mx > 0)
-		{
-		storage = OPENSSL_malloc(mx * sizeof(CRYPTO_EX_DATA_FUNCS*));
-		if(!storage)
-			goto skip;
-		for(i = 0; i < mx; i++)
-			storage[i] = sk_CRYPTO_EX_DATA_FUNCS_value(item->meth,i);
-		}
-skip:
-	CRYPTO_r_unlock(CRYPTO_LOCK_EX_DATA);
-	if((mx > 0) && !storage)
-		{
-		CRYPTOerr(CRYPTO_F_INT_NEW_EX_DATA,ERR_R_MALLOC_FAILURE);
-		return 0;
-		}
-	for(i = 0; i < mx; i++)
-		{
-		if(storage[i] && storage[i]->new_func)
-			{
-			ptr = CRYPTO_get_ex_data(ad, i);
-			storage[i]->new_func(obj,ptr,ad,i,
-				storage[i]->argl,storage[i]->argp);
-			}
-		}
-	if(storage)
-		OPENSSL_free(storage);
-	return 1;
-	}
-
-/* Same thread-safety notes as for "int_new_ex_data" */
-static int int_dup_ex_data(int class_index, CRYPTO_EX_DATA *to,
-		CRYPTO_EX_DATA *from)
-	{
-	int mx, j, i;
-	char *ptr;
-	CRYPTO_EX_DATA_FUNCS **storage = NULL;
-	EX_CLASS_ITEM *item;
-	if(!from->sk)
-		/* 'to' should be "blank" which *is* just like 'from' */
-		return 1;
-	if((item = def_get_class(class_index)) == NULL)
-		return 0;
-	CRYPTO_r_lock(CRYPTO_LOCK_EX_DATA);
-	mx = sk_CRYPTO_EX_DATA_FUNCS_num(item->meth);
-	j = sk_num(from->sk);
-	if(j < mx)
-		mx = j;
-	if(mx > 0)
-		{
-		storage = OPENSSL_malloc(mx * sizeof(CRYPTO_EX_DATA_FUNCS*));
-		if(!storage)
-			goto skip;
-		for(i = 0; i < mx; i++)
-			storage[i] = sk_CRYPTO_EX_DATA_FUNCS_value(item->meth,i);
-		}
-skip:
-	CRYPTO_r_unlock(CRYPTO_LOCK_EX_DATA);
-	if((mx > 0) && !storage)
-		{
-		CRYPTOerr(CRYPTO_F_INT_DUP_EX_DATA,ERR_R_MALLOC_FAILURE);
-		return 0;
-		}
-	for(i = 0; i < mx; i++)
-		{
-		ptr = CRYPTO_get_ex_data(from, i);
-		if(storage[i] && storage[i]->dup_func)
-			storage[i]->dup_func(to,from,&ptr,i,
-				storage[i]->argl,storage[i]->argp);
-		CRYPTO_set_ex_data(to,i,ptr);
-		}
-	if(storage)
-		OPENSSL_free(storage);
-	return 1;
-	}
-
-/* Same thread-safety notes as for "int_new_ex_data" */
-static void int_free_ex_data(int class_index, void *obj,
-		CRYPTO_EX_DATA *ad)
-	{
-	int mx,i;
-	EX_CLASS_ITEM *item;
-	void *ptr;
-	CRYPTO_EX_DATA_FUNCS **storage = NULL;
-	if((item = def_get_class(class_index)) == NULL)
-		return;
-	CRYPTO_r_lock(CRYPTO_LOCK_EX_DATA);
-	mx = sk_CRYPTO_EX_DATA_FUNCS_num(item->meth);
-	if(mx > 0)
-		{
-		storage = OPENSSL_malloc(mx * sizeof(CRYPTO_EX_DATA_FUNCS*));
-		if(!storage)
-			goto skip;
-		for(i = 0; i < mx; i++)
-			storage[i] = sk_CRYPTO_EX_DATA_FUNCS_value(item->meth,i);
-		}
-skip:
-	CRYPTO_r_unlock(CRYPTO_LOCK_EX_DATA);
-	if((mx > 0) && !storage)
-		{
-		CRYPTOerr(CRYPTO_F_INT_FREE_EX_DATA,ERR_R_MALLOC_FAILURE);
-		return;
-		}
-	for(i = 0; i < mx; i++)
-		{
-		if(storage[i] && storage[i]->free_func)
-			{
-			ptr = CRYPTO_get_ex_data(ad,i);
-			storage[i]->free_func(obj,ptr,ad,i,
-				storage[i]->argl,storage[i]->argp);
-			}
-		}
-	if(storage)
-		OPENSSL_free(storage);
-	if(ad->sk)
-		{
-		sk_free(ad->sk);
-		ad->sk=NULL;
-		}
-	}
-
-/********************************************************************/
-/* API functions that defer all "state" operations to the "ex_data"
- * implementation we have set. */
-
-/* Obtain an index for a new class (not the same as getting a new index within
- * an existing class - this is actually getting a new *class*) */
-int CRYPTO_ex_data_new_class(void)
-	{
-	IMPL_CHECK
-	return EX_IMPL(new_class)();
-	}
-
-/* Release all "ex_data" state to prevent memory leaks. This can't be made
- * thread-safe without overhauling a lot of stuff, and shouldn't really be
- * called under potential race-conditions anyway (it's for program shutdown
- * after all). */
-void CRYPTO_cleanup_all_ex_data(void)
-	{
-	IMPL_CHECK
-	EX_IMPL(cleanup)();
-	}
-
-/* Inside an existing class, get/register a new index. */
-int CRYPTO_get_ex_new_index(int class_index, long argl, void *argp,
-		CRYPTO_EX_new *new_func, CRYPTO_EX_dup *dup_func,
-		CRYPTO_EX_free *free_func)
-	{
-	int ret = -1;
-
-	IMPL_CHECK
-	ret = EX_IMPL(get_new_index)(class_index,
-			argl, argp, new_func, dup_func, free_func);
-	return ret;
-	}
-
-/* Initialise a new CRYPTO_EX_DATA for use in a particular class - including
- * calling new() callbacks for each index in the class used by this variable */
-int CRYPTO_new_ex_data(int class_index, void *obj, CRYPTO_EX_DATA *ad)
-	{
-	IMPL_CHECK
-	return EX_IMPL(new_ex_data)(class_index, obj, ad);
-	}
-
-/* Duplicate a CRYPTO_EX_DATA variable - including calling dup() callbacks for
- * each index in the class used by this variable */
-int CRYPTO_dup_ex_data(int class_index, CRYPTO_EX_DATA *to,
-	     CRYPTO_EX_DATA *from)
-	{
-	IMPL_CHECK
-	return EX_IMPL(dup_ex_data)(class_index, to, from);
-	}
-
-/* Cleanup a CRYPTO_EX_DATA variable - including calling free() callbacks for
- * each index in the class used by this variable */
-void CRYPTO_free_ex_data(int class_index, void *obj, CRYPTO_EX_DATA *ad)
-	{
-	IMPL_CHECK
-	EX_IMPL(free_ex_data)(class_index, obj, ad);
-	}
-
-/* For a given CRYPTO_EX_DATA variable, set the value corresponding to a
- * particular index in the class used by this variable */
-int CRYPTO_set_ex_data(CRYPTO_EX_DATA *ad, int idx, void *val)
-	{
-	int i;
-
-	if (ad->sk == NULL)
-		{
-		if ((ad->sk=sk_new_null()) == NULL)
-			{
-			CRYPTOerr(CRYPTO_F_CRYPTO_SET_EX_DATA,ERR_R_MALLOC_FAILURE);
-			return(0);
-			}
-		}
-	i=sk_num(ad->sk);
-
-	while (i <= idx)
-		{
-		if (!sk_push(ad->sk,NULL))
-			{
-			CRYPTOerr(CRYPTO_F_CRYPTO_SET_EX_DATA,ERR_R_MALLOC_FAILURE);
-			return(0);
-			}
-		i++;
-		}
-	sk_set(ad->sk,idx,val);
-	return(1);
-	}
-
-/* For a given CRYPTO_EX_DATA_ variable, get the value corresponding to a
- * particular index in the class used by this variable */
-void *CRYPTO_get_ex_data(const CRYPTO_EX_DATA *ad, int idx)
-	{
-	if (ad->sk == NULL)
-		return(0);
-	else if (idx >= sk_num(ad->sk))
-		return(0);
-	else
-		return(sk_value(ad->sk,idx));
-	}
-
-IMPLEMENT_STACK_OF(CRYPTO_EX_DATA_FUNCS)
diff --git a/crypto/openssl/crypto/hmac/Makefile b/crypto/openssl/crypto/hmac/Makefile
deleted file mode 100644
index 01f10c396ff5..000000000000
--- a/crypto/openssl/crypto/hmac/Makefile
+++ /dev/null
@@ -1,85 +0,0 @@
-#
-# OpenSSL/crypto/md/Makefile
-#
-
-DIR=	hmac
-TOP=	../..
-CC=	cc
-INCLUDES=
-CFLAG=-g
-MAKEFILE=	Makefile
-AR=		ar r
-
-CFLAGS= $(INCLUDES) $(CFLAG)
-
-GENERAL=Makefile
-TEST=hmactest.c
-APPS=
-
-LIB=$(TOP)/libcrypto.a
-LIBSRC=hmac.c
-LIBOBJ=hmac.o
-
-SRC= $(LIBSRC)
-
-EXHEADER= hmac.h
-HEADER=	$(EXHEADER)
-
-ALL=    $(GENERAL) $(SRC) $(HEADER)
-
-top:
-	(cd ../..; $(MAKE) DIRS=crypto SDIRS=$(DIR) sub_all)
-
-all:	lib
-
-lib:	$(LIBOBJ)
-	$(AR) $(LIB) $(LIBOBJ)
-	$(RANLIB) $(LIB) || echo Never mind.
-	@touch lib
-
-files:
-	$(PERL) $(TOP)/util/files.pl Makefile >> $(TOP)/MINFO
-
-links:
-	@$(PERL) $(TOP)/util/mklink.pl ../../include/openssl $(EXHEADER)
-	@$(PERL) $(TOP)/util/mklink.pl ../../test $(TEST)
-	@$(PERL) $(TOP)/util/mklink.pl ../../apps $(APPS)
-
-install:
-	@[ -n "$(INSTALLTOP)" ] # should be set by top Makefile...
-	@headerlist="$(EXHEADER)"; for i in $$headerlist ; \
-	do  \
-	(cp $$i $(INSTALL_PREFIX)$(INSTALLTOP)/include/openssl/$$i; \
-	chmod 644 $(INSTALL_PREFIX)$(INSTALLTOP)/include/openssl/$$i ); \
-	done;
-
-tags:
-	ctags $(SRC)
-
-tests:
-
-lint:
-	lint -DLINT $(INCLUDES) $(SRC)>fluff
-
-depend:
-	@[ -n "$(MAKEDEPEND)" ] # should be set by upper Makefile...
-	$(MAKEDEPEND) -- $(CFLAG) $(INCLUDES) $(DEPFLAG) -- $(PROGS) $(LIBSRC)
-
-dclean:
-	$(PERL) -pe 'if (/^# DO NOT DELETE THIS LINE/) {print; exit(0);}' $(MAKEFILE) >Makefile.new
-	mv -f Makefile.new $(MAKEFILE)
-
-clean:
-	rm -f *.o *.obj lib tags core .pure .nfs* *.old *.bak fluff
-
-# DO NOT DELETE THIS LINE -- make depend depends on it.
-
-hmac.o: ../../e_os.h ../../include/openssl/asn1.h ../../include/openssl/bio.h
-hmac.o: ../../include/openssl/buffer.h ../../include/openssl/crypto.h
-hmac.o: ../../include/openssl/e_os2.h ../../include/openssl/err.h
-hmac.o: ../../include/openssl/evp.h ../../include/openssl/hmac.h
-hmac.o: ../../include/openssl/lhash.h ../../include/openssl/obj_mac.h
-hmac.o: ../../include/openssl/objects.h ../../include/openssl/opensslconf.h
-hmac.o: ../../include/openssl/opensslv.h ../../include/openssl/ossl_typ.h
-hmac.o: ../../include/openssl/safestack.h ../../include/openssl/stack.h
-hmac.o: ../../include/openssl/symhacks.h ../cryptlib.h hmac.c
diff --git a/crypto/openssl/crypto/hmac/hmac.c b/crypto/openssl/crypto/hmac/hmac.c
deleted file mode 100644
index c45e00149275..000000000000
--- a/crypto/openssl/crypto/hmac/hmac.c
+++ /dev/null
@@ -1,173 +0,0 @@
-/* crypto/hmac/hmac.c */
-/* Copyright (C) 1995-1998 Eric Young (eay@cryptsoft.com)
- * All rights reserved.
- *
- * This package is an SSL implementation written
- * by Eric Young (eay@cryptsoft.com).
- * The implementation was written so as to conform with Netscapes SSL.
- * 
- * This library is free for commercial and non-commercial use as long as
- * the following conditions are aheared to.  The following conditions
- * apply to all code found in this distribution, be it the RC4, RSA,
- * lhash, DES, etc., code; not just the SSL code.  The SSL documentation
- * included with this distribution is covered by the same copyright terms
- * except that the holder is Tim Hudson (tjh@cryptsoft.com).
- * 
- * Copyright remains Eric Young's, and as such any Copyright notices in
- * the code are not to be removed.
- * If this package is used in a product, Eric Young should be given attribution
- * as the author of the parts of the library used.
- * This can be in the form of a textual message at program startup or
- * in documentation (online or textual) provided with the package.
- * 
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions
- * are met:
- * 1. Redistributions of source code must retain the copyright
- *    notice, this list of conditions and the following disclaimer.
- * 2. Redistributions in binary form must reproduce the above copyright
- *    notice, this list of conditions and the following disclaimer in the
- *    documentation and/or other materials provided with the distribution.
- * 3. All advertising materials mentioning features or use of this software
- *    must display the following acknowledgement:
- *    "This product includes cryptographic software written by
- *     Eric Young (eay@cryptsoft.com)"
- *    The word 'cryptographic' can be left out if the rouines from the library
- *    being used are not cryptographic related :-).
- * 4. If you include any Windows specific code (or a derivative thereof) from 
- *    the apps directory (application code) you must include an acknowledgement:
- *    "This product includes software written by Tim Hudson (tjh@cryptsoft.com)"
- * 
- * THIS SOFTWARE IS PROVIDED BY ERIC YOUNG ``AS IS'' AND
- * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
- * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
- * ARE DISCLAIMED.  IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE
- * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
- * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
- * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
- * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
- * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
- * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
- * SUCH DAMAGE.
- * 
- * The licence and distribution terms for any publically available version or
- * derivative of this code cannot be changed.  i.e. this code cannot simply be
- * copied and put under another distribution licence
- * [including the GNU Public Licence.]
- */
-#include <stdio.h>
-#include <stdlib.h>
-#include <string.h>
-#include "cryptlib.h"
-#include <openssl/hmac.h>
-
-void HMAC_Init_ex(HMAC_CTX *ctx, const void *key, int len,
-		  const EVP_MD *md, ENGINE *impl)
-	{
-	int i,j,reset=0;
-	unsigned char pad[HMAC_MAX_MD_CBLOCK];
-
-	if (md != NULL)
-		{
-		reset=1;
-		ctx->md=md;
-		}
-	else
-		md=ctx->md;
-
-	if (key != NULL)
-		{
-		reset=1;
-		j=EVP_MD_block_size(md);
-		OPENSSL_assert(j <= (int)sizeof(ctx->key));
-		if (j < len)
-			{
-			EVP_DigestInit_ex(&ctx->md_ctx,md, impl);
-			EVP_DigestUpdate(&ctx->md_ctx,key,len);
-			EVP_DigestFinal_ex(&(ctx->md_ctx),ctx->key,
-				&ctx->key_length);
-			}
-		else
-			{
-			OPENSSL_assert(len>=0 && len<=(int)sizeof(ctx->key));
-			memcpy(ctx->key,key,len);
-			ctx->key_length=len;
-			}
-		if(ctx->key_length != HMAC_MAX_MD_CBLOCK)
-			memset(&ctx->key[ctx->key_length], 0,
-				HMAC_MAX_MD_CBLOCK - ctx->key_length);
-		}
-
-	if (reset)	
-		{
-		for (i=0; i<HMAC_MAX_MD_CBLOCK; i++)
-			pad[i]=0x36^ctx->key[i];
-		EVP_DigestInit_ex(&ctx->i_ctx,md, impl);
-		EVP_DigestUpdate(&ctx->i_ctx,pad,EVP_MD_block_size(md));
-
-		for (i=0; i<HMAC_MAX_MD_CBLOCK; i++)
-			pad[i]=0x5c^ctx->key[i];
-		EVP_DigestInit_ex(&ctx->o_ctx,md, impl);
-		EVP_DigestUpdate(&ctx->o_ctx,pad,EVP_MD_block_size(md));
-		}
-	EVP_MD_CTX_copy_ex(&ctx->md_ctx,&ctx->i_ctx);
-	}
-
-void HMAC_Init(HMAC_CTX *ctx, const void *key, int len,
-	       const EVP_MD *md)
-	{
-	if(key && md)
-	    HMAC_CTX_init(ctx);
-	HMAC_Init_ex(ctx,key,len,md, NULL);
-	}
-
-void HMAC_Update(HMAC_CTX *ctx, const unsigned char *data, size_t len)
-	{
-	EVP_DigestUpdate(&ctx->md_ctx,data,len);
-	}
-
-void HMAC_Final(HMAC_CTX *ctx, unsigned char *md, unsigned int *len)
-	{
-	int j;
-	unsigned int i;
-	unsigned char buf[EVP_MAX_MD_SIZE];
-
-	j=EVP_MD_block_size(ctx->md);
-
-	EVP_DigestFinal_ex(&ctx->md_ctx,buf,&i);
-	EVP_MD_CTX_copy_ex(&ctx->md_ctx,&ctx->o_ctx);
-	EVP_DigestUpdate(&ctx->md_ctx,buf,i);
-	EVP_DigestFinal_ex(&ctx->md_ctx,md,len);
-	}
-
-void HMAC_CTX_init(HMAC_CTX *ctx)
-	{
-	EVP_MD_CTX_init(&ctx->i_ctx);
-	EVP_MD_CTX_init(&ctx->o_ctx);
-	EVP_MD_CTX_init(&ctx->md_ctx);
-	}
-
-void HMAC_CTX_cleanup(HMAC_CTX *ctx)
-	{
-	EVP_MD_CTX_cleanup(&ctx->i_ctx);
-	EVP_MD_CTX_cleanup(&ctx->o_ctx);
-	EVP_MD_CTX_cleanup(&ctx->md_ctx);
-	memset(ctx,0,sizeof *ctx);
-	}
-
-unsigned char *HMAC(const EVP_MD *evp_md, const void *key, int key_len,
-		    const unsigned char *d, size_t n, unsigned char *md,
-		    unsigned int *md_len)
-	{
-	HMAC_CTX c;
-	static unsigned char m[EVP_MAX_MD_SIZE];
-
-	if (md == NULL) md=m;
-	HMAC_CTX_init(&c);
-	HMAC_Init(&c,key,key_len,evp_md);
-	HMAC_Update(&c,d,n);
-	HMAC_Final(&c,md,md_len);
-	HMAC_CTX_cleanup(&c);
-	return(md);
-	}
-
diff --git a/crypto/openssl/crypto/hmac/hmac.h b/crypto/openssl/crypto/hmac/hmac.h
deleted file mode 100644
index 719fc408ace4..000000000000
--- a/crypto/openssl/crypto/hmac/hmac.h
+++ /dev/null
@@ -1,108 +0,0 @@
-/* crypto/hmac/hmac.h */
-/* Copyright (C) 1995-1998 Eric Young (eay@cryptsoft.com)
- * All rights reserved.
- *
- * This package is an SSL implementation written
- * by Eric Young (eay@cryptsoft.com).
- * The implementation was written so as to conform with Netscapes SSL.
- * 
- * This library is free for commercial and non-commercial use as long as
- * the following conditions are aheared to.  The following conditions
- * apply to all code found in this distribution, be it the RC4, RSA,
- * lhash, DES, etc., code; not just the SSL code.  The SSL documentation
- * included with this distribution is covered by the same copyright terms
- * except that the holder is Tim Hudson (tjh@cryptsoft.com).
- * 
- * Copyright remains Eric Young's, and as such any Copyright notices in
- * the code are not to be removed.
- * If this package is used in a product, Eric Young should be given attribution
- * as the author of the parts of the library used.
- * This can be in the form of a textual message at program startup or
- * in documentation (online or textual) provided with the package.
- * 
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions
- * are met:
- * 1. Redistributions of source code must retain the copyright
- *    notice, this list of conditions and the following disclaimer.
- * 2. Redistributions in binary form must reproduce the above copyright
- *    notice, this list of conditions and the following disclaimer in the
- *    documentation and/or other materials provided with the distribution.
- * 3. All advertising materials mentioning features or use of this software
- *    must display the following acknowledgement:
- *    "This product includes cryptographic software written by
- *     Eric Young (eay@cryptsoft.com)"
- *    The word 'cryptographic' can be left out if the rouines from the library
- *    being used are not cryptographic related :-).
- * 4. If you include any Windows specific code (or a derivative thereof) from 
- *    the apps directory (application code) you must include an acknowledgement:
- *    "This product includes software written by Tim Hudson (tjh@cryptsoft.com)"
- * 
- * THIS SOFTWARE IS PROVIDED BY ERIC YOUNG ``AS IS'' AND
- * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
- * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
- * ARE DISCLAIMED.  IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE
- * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
- * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
- * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
- * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
- * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
- * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
- * SUCH DAMAGE.
- * 
- * The licence and distribution terms for any publically available version or
- * derivative of this code cannot be changed.  i.e. this code cannot simply be
- * copied and put under another distribution licence
- * [including the GNU Public Licence.]
- */
-#ifndef HEADER_HMAC_H
-#define HEADER_HMAC_H
-
-#include <openssl/opensslconf.h>
-
-#ifdef OPENSSL_NO_HMAC
-#error HMAC is disabled.
-#endif
-
-#include <openssl/evp.h>
-
-#define HMAC_MAX_MD_CBLOCK	128	/* largest known is SHA512 */
-
-#ifdef  __cplusplus
-extern "C" {
-#endif
-
-typedef struct hmac_ctx_st
-	{
-	const EVP_MD *md;
-	EVP_MD_CTX md_ctx;
-	EVP_MD_CTX i_ctx;
-	EVP_MD_CTX o_ctx;
-	unsigned int key_length;
-	unsigned char key[HMAC_MAX_MD_CBLOCK];
-	} HMAC_CTX;
-
-#define HMAC_size(e)	(EVP_MD_size((e)->md))
-
-
-void HMAC_CTX_init(HMAC_CTX *ctx);
-void HMAC_CTX_cleanup(HMAC_CTX *ctx);
-
-#define HMAC_cleanup(ctx) HMAC_CTX_cleanup(ctx) /* deprecated */
-
-void HMAC_Init(HMAC_CTX *ctx, const void *key, int len,
-	       const EVP_MD *md); /* deprecated */
-void HMAC_Init_ex(HMAC_CTX *ctx, const void *key, int len,
-		  const EVP_MD *md, ENGINE *impl);
-void HMAC_Update(HMAC_CTX *ctx, const unsigned char *data, size_t len);
-void HMAC_Final(HMAC_CTX *ctx, unsigned char *md, unsigned int *len);
-unsigned char *HMAC(const EVP_MD *evp_md, const void *key, int key_len,
-		    const unsigned char *d, size_t n, unsigned char *md,
-		    unsigned int *md_len);
-
-
-#ifdef  __cplusplus
-}
-#endif
-
-#endif
diff --git a/crypto/openssl/crypto/hmac/hmactest.c b/crypto/openssl/crypto/hmac/hmactest.c
deleted file mode 100644
index 1b906b81afb7..000000000000
--- a/crypto/openssl/crypto/hmac/hmactest.c
+++ /dev/null
@@ -1,175 +0,0 @@
-/* crypto/hmac/hmactest.c */
-/* Copyright (C) 1995-1998 Eric Young (eay@cryptsoft.com)
- * All rights reserved.
- *
- * This package is an SSL implementation written
- * by Eric Young (eay@cryptsoft.com).
- * The implementation was written so as to conform with Netscapes SSL.
- * 
- * This library is free for commercial and non-commercial use as long as
- * the following conditions are aheared to.  The following conditions
- * apply to all code found in this distribution, be it the RC4, RSA,
- * lhash, DES, etc., code; not just the SSL code.  The SSL documentation
- * included with this distribution is covered by the same copyright terms
- * except that the holder is Tim Hudson (tjh@cryptsoft.com).
- * 
- * Copyright remains Eric Young's, and as such any Copyright notices in
- * the code are not to be removed.
- * If this package is used in a product, Eric Young should be given attribution
- * as the author of the parts of the library used.
- * This can be in the form of a textual message at program startup or
- * in documentation (online or textual) provided with the package.
- * 
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions
- * are met:
- * 1. Redistributions of source code must retain the copyright
- *    notice, this list of conditions and the following disclaimer.
- * 2. Redistributions in binary form must reproduce the above copyright
- *    notice, this list of conditions and the following disclaimer in the
- *    documentation and/or other materials provided with the distribution.
- * 3. All advertising materials mentioning features or use of this software
- *    must display the following acknowledgement:
- *    "This product includes cryptographic software written by
- *     Eric Young (eay@cryptsoft.com)"
- *    The word 'cryptographic' can be left out if the rouines from the library
- *    being used are not cryptographic related :-).
- * 4. If you include any Windows specific code (or a derivative thereof) from 
- *    the apps directory (application code) you must include an acknowledgement:
- *    "This product includes software written by Tim Hudson (tjh@cryptsoft.com)"
- * 
- * THIS SOFTWARE IS PROVIDED BY ERIC YOUNG ``AS IS'' AND
- * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
- * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
- * ARE DISCLAIMED.  IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE
- * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
- * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
- * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
- * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
- * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
- * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
- * SUCH DAMAGE.
- * 
- * The licence and distribution terms for any publically available version or
- * derivative of this code cannot be changed.  i.e. this code cannot simply be
- * copied and put under another distribution licence
- * [including the GNU Public Licence.]
- */
-
-#include <stdio.h>
-#include <string.h>
-#include <stdlib.h>
-
-#include "../e_os.h"
-
-#ifdef OPENSSL_NO_HMAC
-int main(int argc, char *argv[])
-{
-    printf("No HMAC support\n");
-    return(0);
-}
-#else
-#include <openssl/hmac.h>
-#ifndef OPENSSL_NO_MD5
-#include <openssl/md5.h>
-#endif
-
-#ifdef CHARSET_EBCDIC
-#include <openssl/ebcdic.h>
-#endif
-
-#ifndef OPENSSL_NO_MD5
-static struct test_st
-	{
-	unsigned char key[16];
-	int key_len;
-	unsigned char data[64];
-	int data_len;
-	unsigned char *digest;
-	} test[4]={
-	{	"",
-		0,
-		"More text test vectors to stuff up EBCDIC machines :-)",
-		54,
-		(unsigned char *)"e9139d1e6ee064ef8cf514fc7dc83e86",
-	},{	{0x0b,0x0b,0x0b,0x0b,0x0b,0x0b,0x0b,0x0b,
-		 0x0b,0x0b,0x0b,0x0b,0x0b,0x0b,0x0b,0x0b,},
-		16,
-		"Hi There",
-		8,
-		(unsigned char *)"9294727a3638bb1c13f48ef8158bfc9d",
-	},{	"Jefe",
-		4,
-		"what do ya want for nothing?",
-		28,
-		(unsigned char *)"750c783e6ab0b503eaa86e310a5db738",
-	},{
-		{0xaa,0xaa,0xaa,0xaa,0xaa,0xaa,0xaa,0xaa,
-		 0xaa,0xaa,0xaa,0xaa,0xaa,0xaa,0xaa,0xaa,},
-		16,
-		{0xdd,0xdd,0xdd,0xdd,0xdd,0xdd,0xdd,0xdd,
-		 0xdd,0xdd,0xdd,0xdd,0xdd,0xdd,0xdd,0xdd,
-		 0xdd,0xdd,0xdd,0xdd,0xdd,0xdd,0xdd,0xdd,
-		 0xdd,0xdd,0xdd,0xdd,0xdd,0xdd,0xdd,0xdd,
-		 0xdd,0xdd,0xdd,0xdd,0xdd,0xdd,0xdd,0xdd,
-		 0xdd,0xdd,0xdd,0xdd,0xdd,0xdd,0xdd,0xdd,
-		 0xdd,0xdd},
-		50,
-		(unsigned char *)"56be34521d144c88dbb8c733f0e8b3f6",
-	},
-	};
-#endif
-
-static char *pt(unsigned char *md);
-int main(int argc, char *argv[])
-	{
-#ifndef OPENSSL_NO_MD5
-	int i;
-	char *p;
-#endif
-	int err=0;
-
-#ifdef OPENSSL_NO_MD5
-	printf("test skipped: MD5 disabled\n");
-#else
-
-#ifdef CHARSET_EBCDIC
-	ebcdic2ascii(test[0].data, test[0].data, test[0].data_len);
-	ebcdic2ascii(test[1].data, test[1].data, test[1].data_len);
-	ebcdic2ascii(test[2].key,  test[2].key,  test[2].key_len);
-	ebcdic2ascii(test[2].data, test[2].data, test[2].data_len);
-#endif
-
-	for (i=0; i<4; i++)
-		{
-		p=pt(HMAC(EVP_md5(),
-			test[i].key, test[i].key_len,
-			test[i].data, test[i].data_len,
-			NULL,NULL));
-
-		if (strcmp(p,(char *)test[i].digest) != 0)
-			{
-			printf("error calculating HMAC on %d entry'\n",i);
-			printf("got %s instead of %s\n",p,test[i].digest);
-			err++;
-			}
-		else
-			printf("test %d ok\n",i);
-		}
-#endif /* OPENSSL_NO_MD5 */
-	EXIT(err);
-	return(0);
-	}
-
-#ifndef OPENSSL_NO_MD5
-static char *pt(unsigned char *md)
-	{
-	int i;
-	static char buf[80];
-
-	for (i=0; i<MD5_DIGEST_LENGTH; i++)
-		sprintf(&(buf[i*2]),"%02x",md[i]);
-	return(buf);
-	}
-#endif
-#endif
diff --git a/crypto/openssl/crypto/ia64cpuid.S b/crypto/openssl/crypto/ia64cpuid.S
deleted file mode 100644
index 04fbb3439eb7..000000000000
--- a/crypto/openssl/crypto/ia64cpuid.S
+++ /dev/null
@@ -1,121 +0,0 @@
-// Works on all IA-64 platforms: Linux, HP-UX, Win64i...
-// On Win64i compile with ias.exe.
-.text
-.global	OPENSSL_rdtsc#
-.proc	OPENSSL_rdtsc#
-OPENSSL_rdtsc:
-{ .mib;	mov			r8=ar.itc
-	br.ret.sptk.many	b0		};;
-.endp   OPENSSL_rdtsc#
-
-.global	OPENSSL_atomic_add#
-.proc	OPENSSL_atomic_add#
-.align	32
-OPENSSL_atomic_add:
-{ .mii;	ld4		r2=[r32]
-	nop.i		0
-	nop.i		0		};;
-.Lspin:
-{ .mii;	mov		ar.ccv=r2
-	add		r8=r2,r33
-	mov		r3=r2		};;
-{ .mmi;	mf
-	cmpxchg4.acq	r2=[r32],r8,ar.ccv
-	nop.i		0		};;
-{ .mib;	cmp.ne		p6,p0=r2,r3
-	nop.i		0
-(p6)	br.dpnt		.Lspin		};;
-{ .mib;	nop.m		0
-	sxt4		r8=r8
-	br.ret.sptk.many	b0	};;
-.endp	OPENSSL_atomic_add#
-
-// Returns a structure comprising pointer to the top of stack of
-// the caller and pointer beyond backing storage for the current
-// register frame. The latter is required, because it might be
-// insufficient to wipe backing storage for the current frame
-// (as this procedure does), one might have to go further, toward
-// higher addresses to reach for whole "retroactively" saved
-// context...
-.global	OPENSSL_wipe_cpu#
-.proc	OPENSSL_wipe_cpu#
-.align	32
-OPENSSL_wipe_cpu:
-	.prologue
-	.fframe	0
-	.save	ar.pfs,r2
-	.save	ar.lc,r3
-{ .mib;	alloc		r2=ar.pfs,0,96,0,96
-	mov		r3=ar.lc
-	brp.loop.imp	.L_wipe_top,.L_wipe_end-16
-					};;
-{ .mii;	mov		r9=ar.bsp
-	mov		r8=pr
-	mov		ar.lc=96	};;
-	.body
-{ .mii;	add		r9=96*8-8,r9
-	mov		ar.ec=1		};;
-
-// One can sweep double as fast, but then we can't quarantee
-// that backing storage is wiped...
-.L_wipe_top:
-{ .mfi;	st8		[r9]=r0,-8
-	mov		f127=f0
-	mov		r127=r0		}
-{ .mfb;	nop.m		0
-	nop.f		0
-	br.ctop.sptk	.L_wipe_top	};;
-.L_wipe_end:
-
-{ .mfi;	mov		r11=r0
-	mov		f6=f0
-	mov		r14=r0		}
-{ .mfi;	mov		r15=r0
-	mov		f7=f0
-	mov		r16=r0		}
-{ .mfi;	mov		r17=r0
-	mov		f8=f0
-	mov		r18=r0		}
-{ .mfi;	mov		r19=r0
-	mov		f9=f0
-	mov		r20=r0		}
-{ .mfi;	mov		r21=r0
-	mov		f10=f0
-	mov		r22=r0		}
-{ .mfi;	mov		r23=r0
-	mov		f11=f0
-	mov		r24=r0		}
-{ .mfi;	mov		r25=r0
-	mov		f12=f0
-	mov		r26=r0		}
-{ .mfi;	mov		r27=r0
-	mov		f13=f0
-	mov		r28=r0		}
-{ .mfi;	mov		r29=r0
-	mov		f14=f0
-	mov		r30=r0		}
-{ .mfi;	mov		r31=r0
-	mov		f15=f0
-	nop.i		0		}
-{ .mfi;	mov		f16=f0		}
-{ .mfi;	mov		f17=f0		}
-{ .mfi;	mov		f18=f0		}
-{ .mfi;	mov		f19=f0		}
-{ .mfi;	mov		f20=f0		}
-{ .mfi;	mov		f21=f0		}
-{ .mfi;	mov		f22=f0		}
-{ .mfi;	mov		f23=f0		}
-{ .mfi;	mov		f24=f0		}
-{ .mfi;	mov		f25=f0		}
-{ .mfi;	mov		f26=f0		}
-{ .mfi;	mov		f27=f0		}
-{ .mfi;	mov		f28=f0		}
-{ .mfi;	mov		f29=f0		}
-{ .mfi;	mov		f30=f0		}
-{ .mfi;	add		r9=96*8+8,r9
-	mov		f31=f0
-	mov		pr=r8,0x1ffff	}
-{ .mib;	mov		r8=sp
-	mov		ar.lc=r3
-	br.ret.sptk	b0		};;
-.endp	OPENSSL_wipe_cpu#
diff --git a/crypto/openssl/crypto/idea/Makefile b/crypto/openssl/crypto/idea/Makefile
deleted file mode 100644
index b2e7add666af..000000000000
--- a/crypto/openssl/crypto/idea/Makefile
+++ /dev/null
@@ -1,86 +0,0 @@
-#
-# OpenSSL/crypto/idea/Makefile
-#
-
-DIR=	idea
-TOP=	../..
-CC=	cc
-INCLUDES=
-CFLAG=-g
-MAKEFILE=	Makefile
-AR=		ar r
-
-CFLAGS= $(INCLUDES) $(CFLAG)
-
-GENERAL=Makefile
-TEST=ideatest.c
-APPS=
-
-LIB=$(TOP)/libcrypto.a
-LIBSRC=i_cbc.c i_cfb64.c i_ofb64.c i_ecb.c i_skey.c
-LIBOBJ=i_cbc.o i_cfb64.o i_ofb64.o i_ecb.o i_skey.o
-
-SRC= $(LIBSRC)
-
-EXHEADER= idea.h
-HEADER=	idea_lcl.h $(EXHEADER)
-
-ALL=    $(GENERAL) $(SRC) $(HEADER)
-
-top:
-	(cd ../..; $(MAKE) DIRS=crypto SDIRS=$(DIR) sub_all)
-
-all:	lib
-
-lib:	$(LIBOBJ)
-	$(AR) $(LIB) $(LIBOBJ)
-	$(RANLIB) $(LIB) || echo Never mind.
-	@touch lib
-
-files:
-	$(PERL) $(TOP)/util/files.pl Makefile >> $(TOP)/MINFO
-
-links:
-	@$(PERL) $(TOP)/util/mklink.pl ../../include/openssl $(EXHEADER)
-	@$(PERL) $(TOP)/util/mklink.pl ../../test $(TEST)
-	@$(PERL) $(TOP)/util/mklink.pl ../../apps $(APPS)
-
-install:
-	@[ -n "$(INSTALLTOP)" ] # should be set by top Makefile...
-	@headerlist="$(EXHEADER)"; for i in $$headerlist ; \
-	do  \
-	(cp $$i $(INSTALL_PREFIX)$(INSTALLTOP)/include/openssl/$$i; \
-	chmod 644 $(INSTALL_PREFIX)$(INSTALLTOP)/include/openssl/$$i ); \
-	done;
-
-tags:
-	ctags $(SRC)
-
-tests:
-
-lint:
-	lint -DLINT $(INCLUDES) $(SRC)>fluff
-
-depend:
-	@[ -n "$(MAKEDEPEND)" ] # should be set by upper Makefile...
-	$(MAKEDEPEND) -- $(CFLAG) $(INCLUDES) $(DEPFLAG) -- $(PROGS) $(LIBSRC)
-
-dclean:
-	$(PERL) -pe 'if (/^# DO NOT DELETE THIS LINE/) {print; exit(0);}' $(MAKEFILE) >Makefile.new
-	mv -f Makefile.new $(MAKEFILE)
-
-clean:
-	rm -f *.o *.obj lib tags core .pure .nfs* *.old *.bak fluff
-
-# DO NOT DELETE THIS LINE -- make depend depends on it.
-
-i_cbc.o: ../../include/openssl/idea.h ../../include/openssl/opensslconf.h
-i_cbc.o: i_cbc.c idea_lcl.h
-i_cfb64.o: ../../include/openssl/idea.h ../../include/openssl/opensslconf.h
-i_cfb64.o: i_cfb64.c idea_lcl.h
-i_ecb.o: ../../include/openssl/idea.h ../../include/openssl/opensslconf.h
-i_ecb.o: ../../include/openssl/opensslv.h i_ecb.c idea_lcl.h
-i_ofb64.o: ../../include/openssl/idea.h ../../include/openssl/opensslconf.h
-i_ofb64.o: i_ofb64.c idea_lcl.h
-i_skey.o: ../../include/openssl/idea.h ../../include/openssl/opensslconf.h
-i_skey.o: i_skey.c idea_lcl.h
diff --git a/crypto/openssl/crypto/idea/i_cbc.c b/crypto/openssl/crypto/idea/i_cbc.c
deleted file mode 100644
index ecb9cb8b8367..000000000000
--- a/crypto/openssl/crypto/idea/i_cbc.c
+++ /dev/null
@@ -1,168 +0,0 @@
-/* crypto/idea/i_cbc.c */
-/* Copyright (C) 1995-1998 Eric Young (eay@cryptsoft.com)
- * All rights reserved.
- *
- * This package is an SSL implementation written
- * by Eric Young (eay@cryptsoft.com).
- * The implementation was written so as to conform with Netscapes SSL.
- * 
- * This library is free for commercial and non-commercial use as long as
- * the following conditions are aheared to.  The following conditions
- * apply to all code found in this distribution, be it the RC4, RSA,
- * lhash, DES, etc., code; not just the SSL code.  The SSL documentation
- * included with this distribution is covered by the same copyright terms
- * except that the holder is Tim Hudson (tjh@cryptsoft.com).
- * 
- * Copyright remains Eric Young's, and as such any Copyright notices in
- * the code are not to be removed.
- * If this package is used in a product, Eric Young should be given attribution
- * as the author of the parts of the library used.
- * This can be in the form of a textual message at program startup or
- * in documentation (online or textual) provided with the package.
- * 
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions
- * are met:
- * 1. Redistributions of source code must retain the copyright
- *    notice, this list of conditions and the following disclaimer.
- * 2. Redistributions in binary form must reproduce the above copyright
- *    notice, this list of conditions and the following disclaimer in the
- *    documentation and/or other materials provided with the distribution.
- * 3. All advertising materials mentioning features or use of this software
- *    must display the following acknowledgement:
- *    "This product includes cryptographic software written by
- *     Eric Young (eay@cryptsoft.com)"
- *    The word 'cryptographic' can be left out if the rouines from the library
- *    being used are not cryptographic related :-).
- * 4. If you include any Windows specific code (or a derivative thereof) from 
- *    the apps directory (application code) you must include an acknowledgement:
- *    "This product includes software written by Tim Hudson (tjh@cryptsoft.com)"
- * 
- * THIS SOFTWARE IS PROVIDED BY ERIC YOUNG ``AS IS'' AND
- * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
- * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
- * ARE DISCLAIMED.  IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE
- * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
- * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
- * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
- * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
- * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
- * OUT OF THE USE OF THIS  SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
- * SUCH DAMAGE.
- * 
- * The licence and distribution terms for any publically available version or
- * derivative of this code cannot be changed.  i.e. this code cannot simply be
- * copied and put under another distribution licence
- * [including the GNU Public Licence.]
- */
-
-#include <openssl/idea.h>
-#include "idea_lcl.h"
-
-void idea_cbc_encrypt(const unsigned char *in, unsigned char *out, long length,
-	     IDEA_KEY_SCHEDULE *ks, unsigned char *iv, int encrypt)
-	{
-	register unsigned long tin0,tin1;
-	register unsigned long tout0,tout1,xor0,xor1;
-	register long l=length;
-	unsigned long tin[2];
-
-	if (encrypt)
-		{
-		n2l(iv,tout0);
-		n2l(iv,tout1);
-		iv-=8;
-		for (l-=8; l>=0; l-=8)
-			{
-			n2l(in,tin0);
-			n2l(in,tin1);
-			tin0^=tout0;
-			tin1^=tout1;
-			tin[0]=tin0;
-			tin[1]=tin1;
-			idea_encrypt(tin,ks);
-			tout0=tin[0]; l2n(tout0,out);
-			tout1=tin[1]; l2n(tout1,out);
-			}
-		if (l != -8)
-			{
-			n2ln(in,tin0,tin1,l+8);
-			tin0^=tout0;
-			tin1^=tout1;
-			tin[0]=tin0;
-			tin[1]=tin1;
-			idea_encrypt(tin,ks);
-			tout0=tin[0]; l2n(tout0,out);
-			tout1=tin[1]; l2n(tout1,out);
-			}
-		l2n(tout0,iv);
-		l2n(tout1,iv);
-		}
-	else
-		{
-		n2l(iv,xor0);
-		n2l(iv,xor1);
-		iv-=8;
-		for (l-=8; l>=0; l-=8)
-			{
-			n2l(in,tin0); tin[0]=tin0;
-			n2l(in,tin1); tin[1]=tin1;
-			idea_encrypt(tin,ks);
-			tout0=tin[0]^xor0;
-			tout1=tin[1]^xor1;
-			l2n(tout0,out);
-			l2n(tout1,out);
-			xor0=tin0;
-			xor1=tin1;
-			}
-		if (l != -8)
-			{
-			n2l(in,tin0); tin[0]=tin0;
-			n2l(in,tin1); tin[1]=tin1;
-			idea_encrypt(tin,ks);
-			tout0=tin[0]^xor0;
-			tout1=tin[1]^xor1;
-			l2nn(tout0,tout1,out,l+8);
-			xor0=tin0;
-			xor1=tin1;
-			}
-		l2n(xor0,iv);
-		l2n(xor1,iv);
-		}
-	tin0=tin1=tout0=tout1=xor0=xor1=0;
-	tin[0]=tin[1]=0;
-	}
-
-void idea_encrypt(unsigned long *d, IDEA_KEY_SCHEDULE *key)
-	{
-	register IDEA_INT *p;
-	register unsigned long x1,x2,x3,x4,t0,t1,ul;
-
-	x2=d[0];
-	x1=(x2>>16);
-	x4=d[1];
-	x3=(x4>>16);
-
-	p= &(key->data[0][0]);
-
-	E_IDEA(0);
-	E_IDEA(1);
-	E_IDEA(2);
-	E_IDEA(3);
-	E_IDEA(4);
-	E_IDEA(5);
-	E_IDEA(6);
-	E_IDEA(7);
-
-	x1&=0xffff;
-	idea_mul(x1,x1,*p,ul); p++;
-
-	t0= x3+ *(p++);
-	t1= x2+ *(p++);
-
-	x4&=0xffff;
-	idea_mul(x4,x4,*p,ul);
-
-	d[0]=(t0&0xffff)|((x1&0xffff)<<16);
-	d[1]=(x4&0xffff)|((t1&0xffff)<<16);
-	}
diff --git a/crypto/openssl/crypto/idea/i_cfb64.c b/crypto/openssl/crypto/idea/i_cfb64.c
deleted file mode 100644
index 66d49d520eb3..000000000000
--- a/crypto/openssl/crypto/idea/i_cfb64.c
+++ /dev/null
@@ -1,122 +0,0 @@
-/* crypto/idea/i_cfb64.c */
-/* Copyright (C) 1995-1998 Eric Young (eay@cryptsoft.com)
- * All rights reserved.
- *
- * This package is an SSL implementation written
- * by Eric Young (eay@cryptsoft.com).
- * The implementation was written so as to conform with Netscapes SSL.
- * 
- * This library is free for commercial and non-commercial use as long as
- * the following conditions are aheared to.  The following conditions
- * apply to all code found in this distribution, be it the RC4, RSA,
- * lhash, DES, etc., code; not just the SSL code.  The SSL documentation
- * included with this distribution is covered by the same copyright terms
- * except that the holder is Tim Hudson (tjh@cryptsoft.com).
- * 
- * Copyright remains Eric Young's, and as such any Copyright notices in
- * the code are not to be removed.
- * If this package is used in a product, Eric Young should be given attribution
- * as the author of the parts of the library used.
- * This can be in the form of a textual message at program startup or
- * in documentation (online or textual) provided with the package.
- * 
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions
- * are met:
- * 1. Redistributions of source code must retain the copyright
- *    notice, this list of conditions and the following disclaimer.
- * 2. Redistributions in binary form must reproduce the above copyright
- *    notice, this list of conditions and the following disclaimer in the
- *    documentation and/or other materials provided with the distribution.
- * 3. All advertising materials mentioning features or use of this software
- *    must display the following acknowledgement:
- *    "This product includes cryptographic software written by
- *     Eric Young (eay@cryptsoft.com)"
- *    The word 'cryptographic' can be left out if the rouines from the library
- *    being used are not cryptographic related :-).
- * 4. If you include any Windows specific code (or a derivative thereof) from 
- *    the apps directory (application code) you must include an acknowledgement:
- *    "This product includes software written by Tim Hudson (tjh@cryptsoft.com)"
- * 
- * THIS SOFTWARE IS PROVIDED BY ERIC YOUNG ``AS IS'' AND
- * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
- * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
- * ARE DISCLAIMED.  IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE
- * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
- * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
- * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
- * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
- * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
- * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
- * SUCH DAMAGE.
- * 
- * The licence and distribution terms for any publically available version or
- * derivative of this code cannot be changed.  i.e. this code cannot simply be
- * copied and put under another distribution licence
- * [including the GNU Public Licence.]
- */
-
-#include <openssl/idea.h>
-#include "idea_lcl.h"
-
-/* The input and output encrypted as though 64bit cfb mode is being
- * used.  The extra state information to record how much of the
- * 64bit block we have used is contained in *num;
- */
-
-void idea_cfb64_encrypt(const unsigned char *in, unsigned char *out,
-			long length, IDEA_KEY_SCHEDULE *schedule,
-			unsigned char *ivec, int *num, int encrypt)
-	{
-	register unsigned long v0,v1,t;
-	register int n= *num;
-	register long l=length;
-	unsigned long ti[2];
-	unsigned char *iv,c,cc;
-
-	iv=(unsigned char *)ivec;
-	if (encrypt)
-		{
-		while (l--)
-			{
-			if (n == 0)
-				{
-				n2l(iv,v0); ti[0]=v0;
-				n2l(iv,v1); ti[1]=v1;
-				idea_encrypt((unsigned long *)ti,schedule);
-				iv=(unsigned char *)ivec;
-				t=ti[0]; l2n(t,iv);
-				t=ti[1]; l2n(t,iv);
-				iv=(unsigned char *)ivec;
-				}
-			c= *(in++)^iv[n];
-			*(out++)=c;
-			iv[n]=c;
-			n=(n+1)&0x07;
-			}
-		}
-	else
-		{
-		while (l--)
-			{
-			if (n == 0)
-				{
-				n2l(iv,v0); ti[0]=v0;
-				n2l(iv,v1); ti[1]=v1;
-				idea_encrypt((unsigned long *)ti,schedule);
-				iv=(unsigned char *)ivec;
-				t=ti[0]; l2n(t,iv);
-				t=ti[1]; l2n(t,iv);
-				iv=(unsigned char *)ivec;
-				}
-			cc= *(in++);
-			c=iv[n];
-			iv[n]=cc;
-			*(out++)=c^cc;
-			n=(n+1)&0x07;
-			}
-		}
-	v0=v1=ti[0]=ti[1]=t=c=cc=0;
-	*num=n;
-	}
-
diff --git a/crypto/openssl/crypto/idea/i_ecb.c b/crypto/openssl/crypto/idea/i_ecb.c
deleted file mode 100644
index fef38230a7d1..000000000000
--- a/crypto/openssl/crypto/idea/i_ecb.c
+++ /dev/null
@@ -1,85 +0,0 @@
-/* crypto/idea/i_ecb.c */
-/* Copyright (C) 1995-1998 Eric Young (eay@cryptsoft.com)
- * All rights reserved.
- *
- * This package is an SSL implementation written
- * by Eric Young (eay@cryptsoft.com).
- * The implementation was written so as to conform with Netscapes SSL.
- * 
- * This library is free for commercial and non-commercial use as long as
- * the following conditions are aheared to.  The following conditions
- * apply to all code found in this distribution, be it the RC4, RSA,
- * lhash, DES, etc., code; not just the SSL code.  The SSL documentation
- * included with this distribution is covered by the same copyright terms
- * except that the holder is Tim Hudson (tjh@cryptsoft.com).
- * 
- * Copyright remains Eric Young's, and as such any Copyright notices in
- * the code are not to be removed.
- * If this package is used in a product, Eric Young should be given attribution
- * as the author of the parts of the library used.
- * This can be in the form of a textual message at program startup or
- * in documentation (online or textual) provided with the package.
- * 
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions
- * are met:
- * 1. Redistributions of source code must retain the copyright
- *    notice, this list of conditions and the following disclaimer.
- * 2. Redistributions in binary form must reproduce the above copyright
- *    notice, this list of conditions and the following disclaimer in the
- *    documentation and/or other materials provided with the distribution.
- * 3. All advertising materials mentioning features or use of this software
- *    must display the following acknowledgement:
- *    "This product includes cryptographic software written by
- *     Eric Young (eay@cryptsoft.com)"
- *    The word 'cryptographic' can be left out if the rouines from the library
- *    being used are not cryptographic related :-).
- * 4. If you include any Windows specific code (or a derivative thereof) from 
- *    the apps directory (application code) you must include an acknowledgement:
- *    "This product includes software written by Tim Hudson (tjh@cryptsoft.com)"
- * 
- * THIS SOFTWARE IS PROVIDED BY ERIC YOUNG ``AS IS'' AND
- * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
- * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
- * ARE DISCLAIMED.  IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE
- * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
- * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
- * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
- * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
- * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
- * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
- * SUCH DAMAGE.
- * 
- * The licence and distribution terms for any publically available version or
- * derivative of this code cannot be changed.  i.e. this code cannot simply be
- * copied and put under another distribution licence
- * [including the GNU Public Licence.]
- */
-
-#include <openssl/idea.h>
-#include "idea_lcl.h"
-#include <openssl/opensslv.h>
-
-const char IDEA_version[]="IDEA" OPENSSL_VERSION_PTEXT;
-
-const char *idea_options(void)
-	{
-	if (sizeof(short) != sizeof(IDEA_INT))
-		return("idea(int)");
-	else
-		return("idea(short)");
-	}
-
-void idea_ecb_encrypt(const unsigned char *in, unsigned char *out,
-	     IDEA_KEY_SCHEDULE *ks)
-	{
-	unsigned long l0,l1,d[2];
-
-	n2l(in,l0); d[0]=l0;
-	n2l(in,l1); d[1]=l1;
-	idea_encrypt(d,ks);
-	l0=d[0]; l2n(l0,out);
-	l1=d[1]; l2n(l1,out);
-	l0=l1=d[0]=d[1]=0;
-	}
-
diff --git a/crypto/openssl/crypto/idea/i_ofb64.c b/crypto/openssl/crypto/idea/i_ofb64.c
deleted file mode 100644
index e749e88e34ae..000000000000
--- a/crypto/openssl/crypto/idea/i_ofb64.c
+++ /dev/null
@@ -1,111 +0,0 @@
-/* crypto/idea/i_ofb64.c */
-/* Copyright (C) 1995-1998 Eric Young (eay@cryptsoft.com)
- * All rights reserved.
- *
- * This package is an SSL implementation written
- * by Eric Young (eay@cryptsoft.com).
- * The implementation was written so as to conform with Netscapes SSL.
- * 
- * This library is free for commercial and non-commercial use as long as
- * the following conditions are aheared to.  The following conditions
- * apply to all code found in this distribution, be it the RC4, RSA,
- * lhash, DES, etc., code; not just the SSL code.  The SSL documentation
- * included with this distribution is covered by the same copyright terms
- * except that the holder is Tim Hudson (tjh@cryptsoft.com).
- * 
- * Copyright remains Eric Young's, and as such any Copyright notices in
- * the code are not to be removed.
- * If this package is used in a product, Eric Young should be given attribution
- * as the author of the parts of the library used.
- * This can be in the form of a textual message at program startup or
- * in documentation (online or textual) provided with the package.
- * 
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions
- * are met:
- * 1. Redistributions of source code must retain the copyright
- *    notice, this list of conditions and the following disclaimer.
- * 2. Redistributions in binary form must reproduce the above copyright
- *    notice, this list of conditions and the following disclaimer in the
- *    documentation and/or other materials provided with the distribution.
- * 3. All advertising materials mentioning features or use of this software
- *    must display the following acknowledgement:
- *    "This product includes cryptographic software written by
- *     Eric Young (eay@cryptsoft.com)"
- *    The word 'cryptographic' can be left out if the rouines from the library
- *    being used are not cryptographic related :-).
- * 4. If you include any Windows specific code (or a derivative thereof) from 
- *    the apps directory (application code) you must include an acknowledgement:
- *    "This product includes software written by Tim Hudson (tjh@cryptsoft.com)"
- * 
- * THIS SOFTWARE IS PROVIDED BY ERIC YOUNG ``AS IS'' AND
- * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
- * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
- * ARE DISCLAIMED.  IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE
- * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
- * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
- * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
- * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
- * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
- * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
- * SUCH DAMAGE.
- * 
- * The licence and distribution terms for any publically available version or
- * derivative of this code cannot be changed.  i.e. this code cannot simply be
- * copied and put under another distribution licence
- * [including the GNU Public Licence.]
- */
-
-#include <openssl/idea.h>
-#include "idea_lcl.h"
-
-/* The input and output encrypted as though 64bit ofb mode is being
- * used.  The extra state information to record how much of the
- * 64bit block we have used is contained in *num;
- */
-void idea_ofb64_encrypt(const unsigned char *in, unsigned char *out,
-			long length, IDEA_KEY_SCHEDULE *schedule,
-			unsigned char *ivec, int *num)
-	{
-	register unsigned long v0,v1,t;
-	register int n= *num;
-	register long l=length;
-	unsigned char d[8];
-	register char *dp;
-	unsigned long ti[2];
-	unsigned char *iv;
-	int save=0;
-
-	iv=(unsigned char *)ivec;
-	n2l(iv,v0);
-	n2l(iv,v1);
-	ti[0]=v0;
-	ti[1]=v1;
-	dp=(char *)d;
-	l2n(v0,dp);
-	l2n(v1,dp);
-	while (l--)
-		{
-		if (n == 0)
-			{
-			idea_encrypt((unsigned long *)ti,schedule);
-			dp=(char *)d;
-			t=ti[0]; l2n(t,dp);
-			t=ti[1]; l2n(t,dp);
-			save++;
-			}
-		*(out++)= *(in++)^d[n];
-		n=(n+1)&0x07;
-		}
-	if (save)
-		{
-		v0=ti[0];
-		v1=ti[1];
-		iv=(unsigned char *)ivec;
-		l2n(v0,iv);
-		l2n(v1,iv);
-		}
-	t=v0=v1=ti[0]=ti[1]=0;
-	*num=n;
-	}
-
diff --git a/crypto/openssl/crypto/idea/i_skey.c b/crypto/openssl/crypto/idea/i_skey.c
deleted file mode 100644
index 3b1bbd8a45d8..000000000000
--- a/crypto/openssl/crypto/idea/i_skey.c
+++ /dev/null
@@ -1,157 +0,0 @@
-/* crypto/idea/i_skey.c */
-/* Copyright (C) 1995-1998 Eric Young (eay@cryptsoft.com)
- * All rights reserved.
- *
- * This package is an SSL implementation written
- * by Eric Young (eay@cryptsoft.com).
- * The implementation was written so as to conform with Netscapes SSL.
- * 
- * This library is free for commercial and non-commercial use as long as
- * the following conditions are aheared to.  The following conditions
- * apply to all code found in this distribution, be it the RC4, RSA,
- * lhash, DES, etc., code; not just the SSL code.  The SSL documentation
- * included with this distribution is covered by the same copyright terms
- * except that the holder is Tim Hudson (tjh@cryptsoft.com).
- * 
- * Copyright remains Eric Young's, and as such any Copyright notices in
- * the code are not to be removed.
- * If this package is used in a product, Eric Young should be given attribution
- * as the author of the parts of the library used.
- * This can be in the form of a textual message at program startup or
- * in documentation (online or textual) provided with the package.
- * 
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions
- * are met:
- * 1. Redistributions of source code must retain the copyright
- *    notice, this list of conditions and the following disclaimer.
- * 2. Redistributions in binary form must reproduce the above copyright
- *    notice, this list of conditions and the following disclaimer in the
- *    documentation and/or other materials provided with the distribution.
- * 3. All advertising materials mentioning features or use of this software
- *    must display the following acknowledgement:
- *    "This product includes cryptographic software written by
- *     Eric Young (eay@cryptsoft.com)"
- *    The word 'cryptographic' can be left out if the rouines from the library
- *    being used are not cryptographic related :-).
- * 4. If you include any Windows specific code (or a derivative thereof) from 
- *    the apps directory (application code) you must include an acknowledgement:
- *    "This product includes software written by Tim Hudson (tjh@cryptsoft.com)"
- * 
- * THIS SOFTWARE IS PROVIDED BY ERIC YOUNG ``AS IS'' AND
- * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
- * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
- * ARE DISCLAIMED.  IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE
- * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
- * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
- * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
- * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
- * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
- * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
- * SUCH DAMAGE.
- * 
- * The licence and distribution terms for any publically available version or
- * derivative of this code cannot be changed.  i.e. this code cannot simply be
- * copied and put under another distribution licence
- * [including the GNU Public Licence.]
- */
-
-#include <openssl/idea.h>
-#include "idea_lcl.h"
-
-static IDEA_INT inverse(unsigned int xin);
-void idea_set_encrypt_key(const unsigned char *key, IDEA_KEY_SCHEDULE *ks)
-	{
-	int i;
-	register IDEA_INT *kt,*kf,r0,r1,r2;
-
-	kt= &(ks->data[0][0]);
-	n2s(key,kt[0]); n2s(key,kt[1]); n2s(key,kt[2]); n2s(key,kt[3]);
-	n2s(key,kt[4]); n2s(key,kt[5]); n2s(key,kt[6]); n2s(key,kt[7]);
-
-	kf=kt;
-	kt+=8;
-	for (i=0; i<6; i++)
-		{
-		r2= kf[1];
-		r1= kf[2];
-		*(kt++)= ((r2<<9) | (r1>>7))&0xffff;
-		r0= kf[3];
-		*(kt++)= ((r1<<9) | (r0>>7))&0xffff;
-		r1= kf[4];
-		*(kt++)= ((r0<<9) | (r1>>7))&0xffff;
-		r0= kf[5];
-		*(kt++)= ((r1<<9) | (r0>>7))&0xffff;
-		r1= kf[6];
-		*(kt++)= ((r0<<9) | (r1>>7))&0xffff;
-		r0= kf[7];
-		*(kt++)= ((r1<<9) | (r0>>7))&0xffff;
-		r1= kf[0];
-		if (i >= 5) break;
-		*(kt++)= ((r0<<9) | (r1>>7))&0xffff;
-		*(kt++)= ((r1<<9) | (r2>>7))&0xffff;
-		kf+=8;
-		}
-	}
-
-void idea_set_decrypt_key(const IDEA_KEY_SCHEDULE *ek, IDEA_KEY_SCHEDULE *dk)
-	{
-	int r;
-	register IDEA_INT *tp,t;
-	const IDEA_INT *fp;
-
-	tp= &(dk->data[0][0]);
-	fp= &(ek->data[8][0]);
-	for (r=0; r<9; r++)
-		{
-		*(tp++)=inverse(fp[0]);
-		*(tp++)=((int)(0x10000L-fp[2])&0xffff);
-		*(tp++)=((int)(0x10000L-fp[1])&0xffff);
-		*(tp++)=inverse(fp[3]);
-		if (r == 8) break;
-		fp-=6;
-		*(tp++)=fp[4];
-		*(tp++)=fp[5];
-		}
-
-	tp= &(dk->data[0][0]);
-	t=tp[1];
-	tp[1]=tp[2];
-	tp[2]=t;
-
-	t=tp[49];
-	tp[49]=tp[50];
-	tp[50]=t;
-	}
-
-/* taken directly from the 'paper' I'll have a look at it later */
-static IDEA_INT inverse(unsigned int xin)
-	{
-	long n1,n2,q,r,b1,b2,t;
-
-	if (xin == 0)
-		b2=0;
-	else
-		{
-		n1=0x10001;
-		n2=xin;
-		b2=1;
-		b1=0;
-
-		do	{
-			r=(n1%n2);
-			q=(n1-r)/n2;
-			if (r == 0)
-				{ if (b2 < 0) b2=0x10001+b2; }
-			else
-				{
-				n1=n2;
-				n2=r;
-				t=b2;
-				b2=b1-q*b2;
-				b1=t;
-				}
-			} while (r != 0);
-		}
-	return((IDEA_INT)b2);
-	}
diff --git a/crypto/openssl/crypto/idea/idea.h b/crypto/openssl/crypto/idea/idea.h
deleted file mode 100644
index bf97a37e39ba..000000000000
--- a/crypto/openssl/crypto/idea/idea.h
+++ /dev/null
@@ -1,100 +0,0 @@
-/* crypto/idea/idea.h */
-/* Copyright (C) 1995-1997 Eric Young (eay@cryptsoft.com)
- * All rights reserved.
- *
- * This package is an SSL implementation written
- * by Eric Young (eay@cryptsoft.com).
- * The implementation was written so as to conform with Netscapes SSL.
- * 
- * This library is free for commercial and non-commercial use as long as
- * the following conditions are aheared to.  The following conditions
- * apply to all code found in this distribution, be it the RC4, RSA,
- * lhash, DES, etc., code; not just the SSL code.  The SSL documentation
- * included with this distribution is covered by the same copyright terms
- * except that the holder is Tim Hudson (tjh@cryptsoft.com).
- * 
- * Copyright remains Eric Young's, and as such any Copyright notices in
- * the code are not to be removed.
- * If this package is used in a product, Eric Young should be given attribution
- * as the author of the parts of the library used.
- * This can be in the form of a textual message at program startup or
- * in documentation (online or textual) provided with the package.
- * 
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions
- * are met:
- * 1. Redistributions of source code must retain the copyright
- *    notice, this list of conditions and the following disclaimer.
- * 2. Redistributions in binary form must reproduce the above copyright
- *    notice, this list of conditions and the following disclaimer in the
- *    documentation and/or other materials provided with the distribution.
- * 3. All advertising materials mentioning features or use of this software
- *    must display the following acknowledgement:
- *    "This product includes cryptographic software written by
- *     Eric Young (eay@cryptsoft.com)"
- *    The word 'cryptographic' can be left out if the rouines from the library
- *    being used are not cryptographic related :-).
- * 4. If you include any Windows specific code (or a derivative thereof) from 
- *    the apps directory (application code) you must include an acknowledgement:
- *    "This product includes software written by Tim Hudson (tjh@cryptsoft.com)"
- * 
- * THIS SOFTWARE IS PROVIDED BY ERIC YOUNG ``AS IS'' AND
- * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
- * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
- * ARE DISCLAIMED.  IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE
- * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
- * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
- * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
- * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
- * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
- * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
- * SUCH DAMAGE.
- * 
- * The licence and distribution terms for any publically available version or
- * derivative of this code cannot be changed.  i.e. this code cannot simply be
- * copied and put under another distribution licence
- * [including the GNU Public Licence.]
- */
-
-#ifndef HEADER_IDEA_H
-#define HEADER_IDEA_H
-
-#include <openssl/opensslconf.h> /* IDEA_INT, OPENSSL_NO_IDEA */
-
-#ifdef OPENSSL_NO_IDEA
-#error IDEA is disabled.
-#endif
-
-#define IDEA_ENCRYPT	1
-#define IDEA_DECRYPT	0
-
-#define IDEA_BLOCK	8
-#define IDEA_KEY_LENGTH	16
-
-#ifdef  __cplusplus
-extern "C" {
-#endif
-
-typedef struct idea_key_st
-	{
-	IDEA_INT data[9][6];
-	} IDEA_KEY_SCHEDULE;
-
-const char *idea_options(void);
-void idea_ecb_encrypt(const unsigned char *in, unsigned char *out,
-	IDEA_KEY_SCHEDULE *ks);
-void idea_set_encrypt_key(const unsigned char *key, IDEA_KEY_SCHEDULE *ks);
-void idea_set_decrypt_key(const IDEA_KEY_SCHEDULE *ek, IDEA_KEY_SCHEDULE *dk);
-void idea_cbc_encrypt(const unsigned char *in, unsigned char *out,
-	long length, IDEA_KEY_SCHEDULE *ks, unsigned char *iv,int enc);
-void idea_cfb64_encrypt(const unsigned char *in, unsigned char *out,
-	long length, IDEA_KEY_SCHEDULE *ks, unsigned char *iv,
-	int *num,int enc);
-void idea_ofb64_encrypt(const unsigned char *in, unsigned char *out,
-	long length, IDEA_KEY_SCHEDULE *ks, unsigned char *iv, int *num);
-void idea_encrypt(unsigned long *in, IDEA_KEY_SCHEDULE *ks);
-#ifdef  __cplusplus
-}
-#endif
-
-#endif
diff --git a/crypto/openssl/crypto/idea/idea_lcl.h b/crypto/openssl/crypto/idea/idea_lcl.h
deleted file mode 100644
index f3dbfa67e9ed..000000000000
--- a/crypto/openssl/crypto/idea/idea_lcl.h
+++ /dev/null
@@ -1,215 +0,0 @@
-/* crypto/idea/idea_lcl.h */
-/* Copyright (C) 1995-1998 Eric Young (eay@cryptsoft.com)
- * All rights reserved.
- *
- * This package is an SSL implementation written
- * by Eric Young (eay@cryptsoft.com).
- * The implementation was written so as to conform with Netscapes SSL.
- * 
- * This library is free for commercial and non-commercial use as long as
- * the following conditions are aheared to.  The following conditions
- * apply to all code found in this distribution, be it the RC4, RSA,
- * lhash, DES, etc., code; not just the SSL code.  The SSL documentation
- * included with this distribution is covered by the same copyright terms
- * except that the holder is Tim Hudson (tjh@cryptsoft.com).
- * 
- * Copyright remains Eric Young's, and as such any Copyright notices in
- * the code are not to be removed.
- * If this package is used in a product, Eric Young should be given attribution
- * as the author of the parts of the library used.
- * This can be in the form of a textual message at program startup or
- * in documentation (online or textual) provided with the package.
- * 
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions
- * are met:
- * 1. Redistributions of source code must retain the copyright
- *    notice, this list of conditions and the following disclaimer.
- * 2. Redistributions in binary form must reproduce the above copyright
- *    notice, this list of conditions and the following disclaimer in the
- *    documentation and/or other materials provided with the distribution.
- * 3. All advertising materials mentioning features or use of this software
- *    must display the following acknowledgement:
- *    "This product includes cryptographic software written by
- *     Eric Young (eay@cryptsoft.com)"
- *    The word 'cryptographic' can be left out if the rouines from the library
- *    being used are not cryptographic related :-).
- * 4. If you include any Windows specific code (or a derivative thereof) from 
- *    the apps directory (application code) you must include an acknowledgement:
- *    "This product includes software written by Tim Hudson (tjh@cryptsoft.com)"
- * 
- * THIS SOFTWARE IS PROVIDED BY ERIC YOUNG ``AS IS'' AND
- * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
- * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
- * ARE DISCLAIMED.  IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE
- * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
- * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
- * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
- * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
- * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
- * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
- * SUCH DAMAGE.
- * 
- * The licence and distribution terms for any publically available version or
- * derivative of this code cannot be changed.  i.e. this code cannot simply be
- * copied and put under another distribution licence
- * [including the GNU Public Licence.]
- */
-
-/* The new form of this macro (check if the a*b == 0) was suggested by 
- * Colin Plumb <colin@nyx10.cs.du.edu> */
-/* Removal of the inner if from from Wei Dai 24/4/96 */
-#define idea_mul(r,a,b,ul) \
-ul=(unsigned long)a*b; \
-if (ul != 0) \
-	{ \
-	r=(ul&0xffff)-(ul>>16); \
-	r-=((r)>>16); \
-	} \
-else \
-	r=(-(int)a-b+1); /* assuming a or b is 0 and in range */ 
-
-#ifdef undef
-#define idea_mul(r,a,b,ul,sl) \
-if (a == 0) r=(0x10001-b)&0xffff; \
-else if (b == 0) r=(0x10001-a)&0xffff; \
-else	{ \
-	ul=(unsigned long)a*b; \
-	sl=(ul&0xffff)-(ul>>16); \
-	if (sl <= 0) sl+=0x10001; \
-	r=sl; \
-	} 
-#endif
-
-/*  7/12/95 - Many thanks to Rhys Weatherley <rweather@us.oracle.com>
- * for pointing out that I was assuming little endian
- * byte order for all quantities what idea
- * actually used bigendian.  No where in the spec does it mention
- * this, it is all in terms of 16 bit numbers and even the example
- * does not use byte streams for the input example :-(.
- * If you byte swap each pair of input, keys and iv, the functions
- * would produce the output as the old version :-(.
- */
-
-/* NOTE - c is not incremented as per n2l */
-#define n2ln(c,l1,l2,n)	{ \
-			c+=n; \
-			l1=l2=0; \
-			switch (n) { \
-			case 8: l2 =((unsigned long)(*(--(c))))    ; \
-			case 7: l2|=((unsigned long)(*(--(c))))<< 8; \
-			case 6: l2|=((unsigned long)(*(--(c))))<<16; \
-			case 5: l2|=((unsigned long)(*(--(c))))<<24; \
-			case 4: l1 =((unsigned long)(*(--(c))))    ; \
-			case 3: l1|=((unsigned long)(*(--(c))))<< 8; \
-			case 2: l1|=((unsigned long)(*(--(c))))<<16; \
-			case 1: l1|=((unsigned long)(*(--(c))))<<24; \
-				} \
-			}
-
-/* NOTE - c is not incremented as per l2n */
-#define l2nn(l1,l2,c,n)	{ \
-			c+=n; \
-			switch (n) { \
-			case 8: *(--(c))=(unsigned char)(((l2)    )&0xff); \
-			case 7: *(--(c))=(unsigned char)(((l2)>> 8)&0xff); \
-			case 6: *(--(c))=(unsigned char)(((l2)>>16)&0xff); \
-			case 5: *(--(c))=(unsigned char)(((l2)>>24)&0xff); \
-			case 4: *(--(c))=(unsigned char)(((l1)    )&0xff); \
-			case 3: *(--(c))=(unsigned char)(((l1)>> 8)&0xff); \
-			case 2: *(--(c))=(unsigned char)(((l1)>>16)&0xff); \
-			case 1: *(--(c))=(unsigned char)(((l1)>>24)&0xff); \
-				} \
-			}
-
-#undef n2l
-#define n2l(c,l)        (l =((unsigned long)(*((c)++)))<<24L, \
-                         l|=((unsigned long)(*((c)++)))<<16L, \
-                         l|=((unsigned long)(*((c)++)))<< 8L, \
-                         l|=((unsigned long)(*((c)++))))
-
-#undef l2n
-#define l2n(l,c)        (*((c)++)=(unsigned char)(((l)>>24L)&0xff), \
-                         *((c)++)=(unsigned char)(((l)>>16L)&0xff), \
-                         *((c)++)=(unsigned char)(((l)>> 8L)&0xff), \
-                         *((c)++)=(unsigned char)(((l)     )&0xff))
-
-#undef s2n
-#define s2n(l,c)	(*((c)++)=(unsigned char)(((l)     )&0xff), \
-			 *((c)++)=(unsigned char)(((l)>> 8L)&0xff))
-
-#undef n2s
-#define n2s(c,l)	(l =((IDEA_INT)(*((c)++)))<< 8L, \
-			 l|=((IDEA_INT)(*((c)++)))      )
-
-#ifdef undef
-/* NOTE - c is not incremented as per c2l */
-#define c2ln(c,l1,l2,n)	{ \
-			c+=n; \
-			l1=l2=0; \
-			switch (n) { \
-			case 8: l2 =((unsigned long)(*(--(c))))<<24; \
-			case 7: l2|=((unsigned long)(*(--(c))))<<16; \
-			case 6: l2|=((unsigned long)(*(--(c))))<< 8; \
-			case 5: l2|=((unsigned long)(*(--(c))));     \
-			case 4: l1 =((unsigned long)(*(--(c))))<<24; \
-			case 3: l1|=((unsigned long)(*(--(c))))<<16; \
-			case 2: l1|=((unsigned long)(*(--(c))))<< 8; \
-			case 1: l1|=((unsigned long)(*(--(c))));     \
-				} \
-			}
-
-/* NOTE - c is not incremented as per l2c */
-#define l2cn(l1,l2,c,n)	{ \
-			c+=n; \
-			switch (n) { \
-			case 8: *(--(c))=(unsigned char)(((l2)>>24)&0xff); \
-			case 7: *(--(c))=(unsigned char)(((l2)>>16)&0xff); \
-			case 6: *(--(c))=(unsigned char)(((l2)>> 8)&0xff); \
-			case 5: *(--(c))=(unsigned char)(((l2)    )&0xff); \
-			case 4: *(--(c))=(unsigned char)(((l1)>>24)&0xff); \
-			case 3: *(--(c))=(unsigned char)(((l1)>>16)&0xff); \
-			case 2: *(--(c))=(unsigned char)(((l1)>> 8)&0xff); \
-			case 1: *(--(c))=(unsigned char)(((l1)    )&0xff); \
-				} \
-			}
-
-#undef c2s
-#define c2s(c,l)	(l =((unsigned long)(*((c)++)))    , \
-			 l|=((unsigned long)(*((c)++)))<< 8L)
-
-#undef s2c
-#define s2c(l,c)	(*((c)++)=(unsigned char)(((l)     )&0xff), \
-			 *((c)++)=(unsigned char)(((l)>> 8L)&0xff))
-
-#undef c2l
-#define c2l(c,l)	(l =((unsigned long)(*((c)++)))     , \
-			 l|=((unsigned long)(*((c)++)))<< 8L, \
-			 l|=((unsigned long)(*((c)++)))<<16L, \
-			 l|=((unsigned long)(*((c)++)))<<24L)
-
-#undef l2c
-#define l2c(l,c)	(*((c)++)=(unsigned char)(((l)     )&0xff), \
-			 *((c)++)=(unsigned char)(((l)>> 8L)&0xff), \
-			 *((c)++)=(unsigned char)(((l)>>16L)&0xff), \
-			 *((c)++)=(unsigned char)(((l)>>24L)&0xff))
-#endif
-
-#define E_IDEA(num) \
-	x1&=0xffff; \
-	idea_mul(x1,x1,*p,ul); p++; \
-	x2+= *(p++); \
-	x3+= *(p++); \
-	x4&=0xffff; \
-	idea_mul(x4,x4,*p,ul); p++; \
-	t0=(x1^x3)&0xffff; \
-	idea_mul(t0,t0,*p,ul); p++; \
-	t1=(t0+(x2^x4))&0xffff; \
-	idea_mul(t1,t1,*p,ul); p++; \
-	t0+=t1; \
-	x1^=t1; \
-	x4^=t0; \
-	ul=x2^t0; /* do the swap to x3 */ \
-	x2=x3^t1; \
-	x3=ul;
-
diff --git a/crypto/openssl/crypto/idea/idea_spd.c b/crypto/openssl/crypto/idea/idea_spd.c
deleted file mode 100644
index 699353e8719e..000000000000
--- a/crypto/openssl/crypto/idea/idea_spd.c
+++ /dev/null
@@ -1,299 +0,0 @@
-/* crypto/idea/idea_spd.c */
-/* Copyright (C) 1995-1998 Eric Young (eay@cryptsoft.com)
- * All rights reserved.
- *
- * This package is an SSL implementation written
- * by Eric Young (eay@cryptsoft.com).
- * The implementation was written so as to conform with Netscapes SSL.
- * 
- * This library is free for commercial and non-commercial use as long as
- * the following conditions are aheared to.  The following conditions
- * apply to all code found in this distribution, be it the RC4, RSA,
- * lhash, DES, etc., code; not just the SSL code.  The SSL documentation
- * included with this distribution is covered by the same copyright terms
- * except that the holder is Tim Hudson (tjh@cryptsoft.com).
- * 
- * Copyright remains Eric Young's, and as such any Copyright notices in
- * the code are not to be removed.
- * If this package is used in a product, Eric Young should be given attribution
- * as the author of the parts of the library used.
- * This can be in the form of a textual message at program startup or
- * in documentation (online or textual) provided with the package.
- * 
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions
- * are met:
- * 1. Redistributions of source code must retain the copyright
- *    notice, this list of conditions and the following disclaimer.
- * 2. Redistributions in binary form must reproduce the above copyright
- *    notice, this list of conditions and the following disclaimer in the
- *    documentation and/or other materials provided with the distribution.
- * 3. All advertising materials mentioning features or use of this software
- *    must display the following acknowledgement:
- *    "This product includes cryptographic software written by
- *     Eric Young (eay@cryptsoft.com)"
- *    The word 'cryptographic' can be left out if the rouines from the library
- *    being used are not cryptographic related :-).
- * 4. If you include any Windows specific code (or a derivative thereof) from 
- *    the apps directory (application code) you must include an acknowledgement:
- *    "This product includes software written by Tim Hudson (tjh@cryptsoft.com)"
- * 
- * THIS SOFTWARE IS PROVIDED BY ERIC YOUNG ``AS IS'' AND
- * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
- * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
- * ARE DISCLAIMED.  IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE
- * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
- * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
- * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
- * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
- * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
- * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
- * SUCH DAMAGE.
- * 
- * The licence and distribution terms for any publically available version or
- * derivative of this code cannot be changed.  i.e. this code cannot simply be
- * copied and put under another distribution licence
- * [including the GNU Public Licence.]
- */
-
-/* 11-Sep-92 Andrew Daviel   Support for Silicon Graphics IRIX added */
-/* 06-Apr-92 Luke Brennan    Support for VMS and add extra signal calls */
-
-#if !defined(OPENSSL_SYS_MSDOS) && (!defined(OPENSSL_SYS_VMS) || defined(__DECC)) && !defined(OPENSSL_SYS_MACOSX)
-#define TIMES
-#endif
-
-#include <stdio.h>
-
-#include <openssl/e_os2.h>
-#include OPENSSL_UNISTD_IO
-OPENSSL_DECLARE_EXIT
-
-#ifndef OPENSSL_SYS_NETWARE
-#include <signal.h>
-#endif
-
-#ifndef _IRIX
-#include <time.h>
-#endif
-#ifdef TIMES
-#include <sys/types.h>
-#include <sys/times.h>
-#endif
-
-/* Depending on the VMS version, the tms structure is perhaps defined.
-   The __TMS macro will show if it was.  If it wasn't defined, we should
-   undefine TIMES, since that tells the rest of the program how things
-   should be handled.				-- Richard Levitte */
-#if defined(OPENSSL_SYS_VMS_DECC) && !defined(__TMS)
-#undef TIMES
-#endif
-
-#ifndef TIMES
-#include <sys/timeb.h>
-#endif
-
-#if defined(sun) || defined(__ultrix)
-#define _POSIX_SOURCE
-#include <limits.h>
-#include <sys/param.h>
-#endif
-
-#include <openssl/idea.h>
-
-/* The following if from times(3) man page.  It may need to be changed */
-#ifndef HZ
-#ifndef CLK_TCK
-#define HZ	100.0
-#else /* CLK_TCK */
-#define HZ ((double)CLK_TCK)
-#endif
-#endif
-
-#define BUFSIZE	((long)1024)
-long run=0;
-
-double Time_F(int s);
-#ifdef SIGALRM
-#if defined(__STDC__) || defined(sgi) || defined(_AIX)
-#define SIGRETTYPE void
-#else
-#define SIGRETTYPE int
-#endif
-
-SIGRETTYPE sig_done(int sig);
-SIGRETTYPE sig_done(int sig)
-	{
-	signal(SIGALRM,sig_done);
-	run=0;
-#ifdef LINT
-	sig=sig;
-#endif
-	}
-#endif
-
-#define START	0
-#define STOP	1
-
-double Time_F(int s)
-	{
-	double ret;
-#ifdef TIMES
-	static struct tms tstart,tend;
-
-	if (s == START)
-		{
-		times(&tstart);
-		return(0);
-		}
-	else
-		{
-		times(&tend);
-		ret=((double)(tend.tms_utime-tstart.tms_utime))/HZ;
-		return((ret == 0.0)?1e-6:ret);
-		}
-#else /* !times() */
-	static struct timeb tstart,tend;
-	long i;
-
-	if (s == START)
-		{
-		ftime(&tstart);
-		return(0);
-		}
-	else
-		{
-		ftime(&tend);
-		i=(long)tend.millitm-(long)tstart.millitm;
-		ret=((double)(tend.time-tstart.time))+((double)i)/1e3;
-		return((ret == 0.0)?1e-6:ret);
-		}
-#endif
-	}
-
-int main(int argc, char **argv)
-	{
-	long count;
-	static unsigned char buf[BUFSIZE];
-	static unsigned char key[] ={
-			0x12,0x34,0x56,0x78,0x9a,0xbc,0xde,0xf0,
-			0xfe,0xdc,0xba,0x98,0x76,0x54,0x32,0x10,
-			};
-	IDEA_KEY_SCHEDULE sch;
-	double a,aa,b,c,d;
-#ifndef SIGALRM
-	long ca,cca,cb,cc;
-#endif
-
-#ifndef TIMES
-	printf("To get the most accurate results, try to run this\n");
-	printf("program when this computer is idle.\n");
-#endif
-
-#ifndef SIGALRM
-	printf("First we calculate the approximate speed ...\n");
-	idea_set_encrypt_key(key,&sch);
-	count=10;
-	do	{
-		long i;
-		IDEA_INT data[2];
-
-		count*=2;
-		Time_F(START);
-		for (i=count; i; i--)
-			idea_encrypt(data,&sch);
-		d=Time_F(STOP);
-		} while (d < 3.0);
-	ca=count/4;
-	cca=count/200;
-	cb=count;
-	cc=count*8/BUFSIZE+1;
-	printf("idea_set_encrypt_key %ld times\n",ca);
-#define COND(d)	(count <= (d))
-#define COUNT(d) (d)
-#else
-#define COND(c)	(run)
-#define COUNT(d) (count)
-	signal(SIGALRM,sig_done);
-	printf("Doing idea_set_encrypt_key for 10 seconds\n");
-	alarm(10);
-#endif
-
-	Time_F(START);
-	for (count=0,run=1; COND(ca); count+=4)
-		{
-		idea_set_encrypt_key(key,&sch);
-		idea_set_encrypt_key(key,&sch);
-		idea_set_encrypt_key(key,&sch);
-		idea_set_encrypt_key(key,&sch);
-		}
-	d=Time_F(STOP);
-	printf("%ld idea idea_set_encrypt_key's in %.2f seconds\n",count,d);
-	a=((double)COUNT(ca))/d;
-
-#ifdef SIGALRM
-	printf("Doing idea_set_decrypt_key for 10 seconds\n");
-	alarm(10);
-#else
-	printf("Doing idea_set_decrypt_key %ld times\n",cca);
-#endif
-
-	Time_F(START);
-	for (count=0,run=1; COND(cca); count+=4)
-		{
-		idea_set_decrypt_key(&sch,&sch);
-		idea_set_decrypt_key(&sch,&sch);
-		idea_set_decrypt_key(&sch,&sch);
-		idea_set_decrypt_key(&sch,&sch);
-		}
-	d=Time_F(STOP);
-	printf("%ld idea idea_set_decrypt_key's in %.2f seconds\n",count,d);
-	aa=((double)COUNT(cca))/d;
-
-#ifdef SIGALRM
-	printf("Doing idea_encrypt's for 10 seconds\n");
-	alarm(10);
-#else
-	printf("Doing idea_encrypt %ld times\n",cb);
-#endif
-	Time_F(START);
-	for (count=0,run=1; COND(cb); count+=4)
-		{
-		unsigned long data[2];
-
-		idea_encrypt(data,&sch);
-		idea_encrypt(data,&sch);
-		idea_encrypt(data,&sch);
-		idea_encrypt(data,&sch);
-		}
-	d=Time_F(STOP);
-	printf("%ld idea_encrypt's in %.2f second\n",count,d);
-	b=((double)COUNT(cb)*8)/d;
-
-#ifdef SIGALRM
-	printf("Doing idea_cbc_encrypt on %ld byte blocks for 10 seconds\n",
-		BUFSIZE);
-	alarm(10);
-#else
-	printf("Doing idea_cbc_encrypt %ld times on %ld byte blocks\n",cc,
-		BUFSIZE);
-#endif
-	Time_F(START);
-	for (count=0,run=1; COND(cc); count++)
-		idea_cbc_encrypt(buf,buf,BUFSIZE,&sch,
-			&(key[0]),IDEA_ENCRYPT);
-	d=Time_F(STOP);
-	printf("%ld idea_cbc_encrypt's of %ld byte blocks in %.2f second\n",
-		count,BUFSIZE,d);
-	c=((double)COUNT(cc)*BUFSIZE)/d;
-
-	printf("IDEA set_encrypt_key per sec = %12.2f (%9.3fuS)\n",a,1.0e6/a);
-	printf("IDEA set_decrypt_key per sec = %12.2f (%9.3fuS)\n",aa,1.0e6/aa);
-	printf("IDEA raw ecb bytes   per sec = %12.2f (%9.3fuS)\n",b,8.0e6/b);
-	printf("IDEA cbc     bytes   per sec = %12.2f (%9.3fuS)\n",c,8.0e6/c);
-	exit(0);
-#if defined(LINT) || defined(OPENSSL_SYS_MSDOS)
-	return(0);
-#endif
-	}
-
diff --git a/crypto/openssl/crypto/idea/ideatest.c b/crypto/openssl/crypto/idea/ideatest.c
deleted file mode 100644
index e6ffc7025e75..000000000000
--- a/crypto/openssl/crypto/idea/ideatest.c
+++ /dev/null
@@ -1,235 +0,0 @@
-/* crypto/idea/ideatest.c */
-/* Copyright (C) 1995-1998 Eric Young (eay@cryptsoft.com)
- * All rights reserved.
- *
- * This package is an SSL implementation written
- * by Eric Young (eay@cryptsoft.com).
- * The implementation was written so as to conform with Netscapes SSL.
- * 
- * This library is free for commercial and non-commercial use as long as
- * the following conditions are aheared to.  The following conditions
- * apply to all code found in this distribution, be it the RC4, RSA,
- * lhash, DES, etc., code; not just the SSL code.  The SSL documentation
- * included with this distribution is covered by the same copyright terms
- * except that the holder is Tim Hudson (tjh@cryptsoft.com).
- * 
- * Copyright remains Eric Young's, and as such any Copyright notices in
- * the code are not to be removed.
- * If this package is used in a product, Eric Young should be given attribution
- * as the author of the parts of the library used.
- * This can be in the form of a textual message at program startup or
- * in documentation (online or textual) provided with the package.
- * 
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions
- * are met:
- * 1. Redistributions of source code must retain the copyright
- *    notice, this list of conditions and the following disclaimer.
- * 2. Redistributions in binary form must reproduce the above copyright
- *    notice, this list of conditions and the following disclaimer in the
- *    documentation and/or other materials provided with the distribution.
- * 3. All advertising materials mentioning features or use of this software
- *    must display the following acknowledgement:
- *    "This product includes cryptographic software written by
- *     Eric Young (eay@cryptsoft.com)"
- *    The word 'cryptographic' can be left out if the rouines from the library
- *    being used are not cryptographic related :-).
- * 4. If you include any Windows specific code (or a derivative thereof) from 
- *    the apps directory (application code) you must include an acknowledgement:
- *    "This product includes software written by Tim Hudson (tjh@cryptsoft.com)"
- * 
- * THIS SOFTWARE IS PROVIDED BY ERIC YOUNG ``AS IS'' AND
- * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
- * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
- * ARE DISCLAIMED.  IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE
- * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
- * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
- * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
- * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
- * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
- * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
- * SUCH DAMAGE.
- * 
- * The licence and distribution terms for any publically available version or
- * derivative of this code cannot be changed.  i.e. this code cannot simply be
- * copied and put under another distribution licence
- * [including the GNU Public Licence.]
- */
-
-#include <stdio.h>
-#include <string.h>
-#include <stdlib.h>
-
-#include "../e_os.h"
-
-#ifdef OPENSSL_NO_IDEA
-int main(int argc, char *argv[])
-{
-    printf("No IDEA support\n");
-    return(0);
-}
-#else
-#include <openssl/idea.h>
-
-unsigned char k[16]={
-	0x00,0x01,0x00,0x02,0x00,0x03,0x00,0x04,
-	0x00,0x05,0x00,0x06,0x00,0x07,0x00,0x08};
-
-unsigned char in[8]={0x00,0x00,0x00,0x01,0x00,0x02,0x00,0x03};
-unsigned char  c[8]={0x11,0xFB,0xED,0x2B,0x01,0x98,0x6D,0xE5};
-unsigned char out[80];
-
-char *text="Hello to all people out there";
-
-static unsigned char cfb_key[16]={
-	0xe1,0xf0,0xc3,0xd2,0xa5,0xb4,0x87,0x96,
-	0x69,0x78,0x4b,0x5a,0x2d,0x3c,0x0f,0x1e,
-	};
-static unsigned char cfb_iv[80]={0x34,0x12,0x78,0x56,0xab,0x90,0xef,0xcd};
-static unsigned char cfb_buf1[40],cfb_buf2[40],cfb_tmp[8];
-#define CFB_TEST_SIZE 24
-static unsigned char plain[CFB_TEST_SIZE]=
-        {
-        0x4e,0x6f,0x77,0x20,0x69,0x73,
-        0x20,0x74,0x68,0x65,0x20,0x74,
-        0x69,0x6d,0x65,0x20,0x66,0x6f,
-        0x72,0x20,0x61,0x6c,0x6c,0x20
-        };
-static unsigned char cfb_cipher64[CFB_TEST_SIZE]={
-	0x59,0xD8,0xE2,0x65,0x00,0x58,0x6C,0x3F,
-	0x2C,0x17,0x25,0xD0,0x1A,0x38,0xB7,0x2A,
-	0x39,0x61,0x37,0xDC,0x79,0xFB,0x9F,0x45
-
-/*	0xF9,0x78,0x32,0xB5,0x42,0x1A,0x6B,0x38,
-	0x9A,0x44,0xD6,0x04,0x19,0x43,0xC4,0xD9,
-	0x3D,0x1E,0xAE,0x47,0xFC,0xCF,0x29,0x0B,*/
-	}; 
-
-static int cfb64_test(unsigned char *cfb_cipher);
-static char *pt(unsigned char *p);
-int main(int argc, char *argv[])
-	{
-	int i,err=0;
-	IDEA_KEY_SCHEDULE key,dkey; 
-	unsigned char iv[8];
-
-	idea_set_encrypt_key(k,&key);
-	idea_ecb_encrypt(in,out,&key);
-	if (memcmp(out,c,8) != 0)
-		{
-		printf("ecb idea error encrypting\n");
-		printf("got     :");
-		for (i=0; i<8; i++)
-			printf("%02X ",out[i]);
-		printf("\n");
-		printf("expected:");
-		for (i=0; i<8; i++)
-			printf("%02X ",c[i]);
-		err=20;
-		printf("\n");
-		}
-
-	idea_set_decrypt_key(&key,&dkey);
-	idea_ecb_encrypt(c,out,&dkey);
-	if (memcmp(out,in,8) != 0)
-		{
-		printf("ecb idea error decrypting\n");
-		printf("got     :");
-		for (i=0; i<8; i++)
-			printf("%02X ",out[i]);
-		printf("\n");
-		printf("expected:");
-		for (i=0; i<8; i++)
-			printf("%02X ",in[i]);
-		printf("\n");
-		err=3;
-		}
-
-	if (err == 0) printf("ecb idea ok\n");
-
-	memcpy(iv,k,8);
-	idea_cbc_encrypt((unsigned char *)text,out,strlen(text)+1,&key,iv,1);
-	memcpy(iv,k,8);
-	idea_cbc_encrypt(out,out,8,&dkey,iv,0);
-	idea_cbc_encrypt(&(out[8]),&(out[8]),strlen(text)+1-8,&dkey,iv,0);
-	if (memcmp(text,out,strlen(text)+1) != 0)
-		{
-		printf("cbc idea bad\n");
-		err=4;
-		}
-	else
-		printf("cbc idea ok\n");
-
-	printf("cfb64 idea ");
-	if (cfb64_test(cfb_cipher64))
-		{
-		printf("bad\n");
-		err=5;
-		}
-	else
-		printf("ok\n");
-
-#ifdef OPENSSL_SYS_NETWARE
-    if (err) printf("ERROR: %d\n", err);
-#endif
-	EXIT(err);
-	return(err);
-	}
-
-static int cfb64_test(unsigned char *cfb_cipher)
-        {
-        IDEA_KEY_SCHEDULE eks,dks;
-        int err=0,i,n;
-
-        idea_set_encrypt_key(cfb_key,&eks);
-        idea_set_decrypt_key(&eks,&dks);
-        memcpy(cfb_tmp,cfb_iv,8);
-        n=0;
-        idea_cfb64_encrypt(plain,cfb_buf1,(long)12,&eks,
-                cfb_tmp,&n,IDEA_ENCRYPT);
-        idea_cfb64_encrypt(&(plain[12]),&(cfb_buf1[12]),
-                (long)CFB_TEST_SIZE-12,&eks,
-                cfb_tmp,&n,IDEA_ENCRYPT);
-        if (memcmp(cfb_cipher,cfb_buf1,CFB_TEST_SIZE) != 0)
-                {
-                err=1;
-                printf("idea_cfb64_encrypt encrypt error\n");
-                for (i=0; i<CFB_TEST_SIZE; i+=8)
-                        printf("%s\n",pt(&(cfb_buf1[i])));
-                }
-        memcpy(cfb_tmp,cfb_iv,8);
-        n=0;
-        idea_cfb64_encrypt(cfb_buf1,cfb_buf2,(long)17,&eks,
-                cfb_tmp,&n,IDEA_DECRYPT);
-        idea_cfb64_encrypt(&(cfb_buf1[17]),&(cfb_buf2[17]),
-                (long)CFB_TEST_SIZE-17,&dks,
-                cfb_tmp,&n,IDEA_DECRYPT);
-        if (memcmp(plain,cfb_buf2,CFB_TEST_SIZE) != 0)
-                {
-                err=1;
-                printf("idea_cfb_encrypt decrypt error\n");
-                for (i=0; i<24; i+=8)
-                        printf("%s\n",pt(&(cfb_buf2[i])));
-                }
-        return(err);
-        }
-
-static char *pt(unsigned char *p)
-	{
-	static char bufs[10][20];
-	static int bnum=0;
-	char *ret;
-	int i;
-	static char *f="0123456789ABCDEF";
-
-	ret= &(bufs[bnum++][0]);
-	bnum%=10;
-	for (i=0; i<8; i++)
-		{
-		ret[i*2]=f[(p[i]>>4)&0xf];
-		ret[i*2+1]=f[p[i]&0xf];
-		}
-	ret[16]='\0';
-	return(ret);
-	}
-#endif
diff --git a/crypto/openssl/crypto/idea/version b/crypto/openssl/crypto/idea/version
deleted file mode 100644
index 3f2229379549..000000000000
--- a/crypto/openssl/crypto/idea/version
+++ /dev/null
@@ -1,12 +0,0 @@
-1.1 07/12/95 - eay
-	Many thanks to Rhys Weatherley <rweather@us.oracle.com>
-	for pointing out that I was assuming little endian byte
-	order for all quantities what idea actually used
-	bigendian.  No where in the spec does it mention
-	this, it is all in terms of 16 bit numbers and even the example
-	does not use byte streams for the input example :-(.
-	If you byte swap each pair of input, keys and iv, the functions
-	would produce the output as the old version :-(.
-
-1.0 ??/??/95 - eay
-	First version.
diff --git a/crypto/openssl/crypto/krb5/Makefile b/crypto/openssl/crypto/krb5/Makefile
deleted file mode 100644
index 14077390d692..000000000000
--- a/crypto/openssl/crypto/krb5/Makefile
+++ /dev/null
@@ -1,84 +0,0 @@
-#
-# OpenSSL/krb5/Makefile
-#
-
-DIR=	krb5
-TOP=	../..
-CC=	cc
-INCLUDES= -I.. -I$(TOP) -I../../include
-CFLAG=-g
-MAKEFILE=	Makefile
-AR=		ar r
-
-CFLAGS= $(INCLUDES) $(CFLAG)
-
-GENERAL=Makefile README
-TEST=
-APPS=
-
-LIB=$(TOP)/libcrypto.a
-LIBSRC= krb5_asn.c
-
-LIBOBJ= krb5_asn.o
-
-SRC= $(LIBSRC)
-
-EXHEADER= krb5_asn.h
-HEADER=	$(EXHEADER)
-
-ALL=    $(GENERAL) $(SRC) $(HEADER)
-
-top:
-	(cd ../..; $(MAKE) DIRS=crypto SDIRS=$(DIR) sub_all)
-
-all:	lib
-
-lib:	$(LIBOBJ)
-	$(AR) $(LIB) $(LIBOBJ)
-	$(RANLIB) $(LIB) || echo Never mind.
-	@touch lib
-
-files:
-	$(PERL) $(TOP)/util/files.pl Makefile >> $(TOP)/MINFO
-
-links:
-	@$(PERL) $(TOP)/util/mklink.pl ../../include/openssl $(EXHEADER)
-	@$(PERL) $(TOP)/util/mklink.pl ../../test $(TEST)
-	@$(PERL) $(TOP)/util/mklink.pl ../../apps $(APPS)
-
-install:
-	@[ -n "$(INSTALLTOP)" ] # should be set by top Makefile...
-	@headerlist="$(EXHEADER)"; for i in $$headerlist ; \
-	do  \
-	(cp $$i $(INSTALL_PREFIX)$(INSTALLTOP)/include/openssl/$$i; \
-	chmod 644 $(INSTALL_PREFIX)$(INSTALLTOP)/include/openssl/$$i ); \
-	done;
-
-tags:
-	ctags $(SRC)
-
-tests:
-
-lint:
-	lint -DLINT $(INCLUDES) $(SRC)>fluff
-
-depend:
-	@[ -n "$(MAKEDEPEND)" ] # should be set by upper Makefile...
-	$(MAKEDEPEND) -- $(CFLAG) $(INCLUDES) $(DEPFLAG) -- $(LIBSRC)
-
-dclean:
-	$(PERL) -pe 'if (/^# DO NOT DELETE THIS LINE/) {print; exit(0);}' $(MAKEFILE) >Makefile.new
-	mv -f Makefile.new $(MAKEFILE)
-
-clean:
-	rm -f *.o *.obj lib tags core .pure .nfs* *.old *.bak fluff
-
-# DO NOT DELETE THIS LINE -- make depend depends on it.
-
-krb5_asn.o: ../../include/openssl/asn1.h ../../include/openssl/asn1t.h
-krb5_asn.o: ../../include/openssl/bio.h ../../include/openssl/crypto.h
-krb5_asn.o: ../../include/openssl/e_os2.h ../../include/openssl/krb5_asn.h
-krb5_asn.o: ../../include/openssl/opensslconf.h
-krb5_asn.o: ../../include/openssl/opensslv.h ../../include/openssl/ossl_typ.h
-krb5_asn.o: ../../include/openssl/safestack.h ../../include/openssl/stack.h
-krb5_asn.o: ../../include/openssl/symhacks.h krb5_asn.c
diff --git a/crypto/openssl/crypto/krb5/krb5_asn.c b/crypto/openssl/crypto/krb5/krb5_asn.c
deleted file mode 100644
index 1fb741d2a0d7..000000000000
--- a/crypto/openssl/crypto/krb5/krb5_asn.c
+++ /dev/null
@@ -1,167 +0,0 @@
-/* krb5_asn.c */
-/* Written by Vern Staats <staatsvr@asc.hpc.mil> for the OpenSSL project,
-** using ocsp/{*.h,*asn*.c} as a starting point
-*/
-/* ====================================================================
- * Copyright (c) 2000 The OpenSSL Project.  All rights reserved.
- *
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions
- * are met:
- *
- * 1. Redistributions of source code must retain the above copyright
- *    notice, this list of conditions and the following disclaimer. 
- *
- * 2. Redistributions in binary form must reproduce the above copyright
- *    notice, this list of conditions and the following disclaimer in
- *    the documentation and/or other materials provided with the
- *    distribution.
- *
- * 3. All advertising materials mentioning features or use of this
- *    software must display the following acknowledgment:
- *    "This product includes software developed by the OpenSSL Project
- *    for use in the OpenSSL Toolkit. (http://www.OpenSSL.org/)"
- *
- * 4. The names "OpenSSL Toolkit" and "OpenSSL Project" must not be used to
- *    endorse or promote products derived from this software without
- *    prior written permission. For written permission, please contact
- *    licensing@OpenSSL.org.
- *
- * 5. Products derived from this software may not be called "OpenSSL"
- *    nor may "OpenSSL" appear in their names without prior written
- *    permission of the OpenSSL Project.
- *
- * 6. Redistributions of any form whatsoever must retain the following
- *    acknowledgment:
- *    "This product includes software developed by the OpenSSL Project
- *    for use in the OpenSSL Toolkit (http://www.OpenSSL.org/)"
- *
- * THIS SOFTWARE IS PROVIDED BY THE OpenSSL PROJECT ``AS IS'' AND ANY
- * EXPRESSED OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
- * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR
- * PURPOSE ARE DISCLAIMED.  IN NO EVENT SHALL THE OpenSSL PROJECT OR
- * ITS CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
- * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
- * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
- * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
- * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
- * STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
- * ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED
- * OF THE POSSIBILITY OF SUCH DAMAGE.
- * ====================================================================
- *
- * This product includes cryptographic software written by Eric Young
- * (eay@cryptsoft.com).  This product includes software written by Tim
- * Hudson (tjh@cryptsoft.com).
- *
- */
-#include <openssl/asn1.h>
-#include <openssl/asn1t.h>
-#include <openssl/krb5_asn.h>
-
-
-ASN1_SEQUENCE(KRB5_ENCDATA) = {
-	ASN1_EXP(KRB5_ENCDATA, etype,		ASN1_INTEGER,	  0),
-	ASN1_EXP_OPT(KRB5_ENCDATA, kvno,	ASN1_INTEGER,	  1),
-	ASN1_EXP(KRB5_ENCDATA, cipher,		ASN1_OCTET_STRING,2)
-} ASN1_SEQUENCE_END(KRB5_ENCDATA)
-
-IMPLEMENT_ASN1_FUNCTIONS(KRB5_ENCDATA)
-
-
-ASN1_SEQUENCE(KRB5_PRINCNAME) = {
-	ASN1_EXP(KRB5_PRINCNAME, nametype,	ASN1_INTEGER,	  0),
-	ASN1_EXP_SEQUENCE_OF(KRB5_PRINCNAME, namestring, ASN1_GENERALSTRING, 1)
-} ASN1_SEQUENCE_END(KRB5_PRINCNAME)
-
-IMPLEMENT_ASN1_FUNCTIONS(KRB5_PRINCNAME)
-
-
-/* [APPLICATION 1] = 0x61 */
-ASN1_SEQUENCE(KRB5_TKTBODY) = {
-	ASN1_EXP(KRB5_TKTBODY, tktvno,		ASN1_INTEGER,	  0),
-	ASN1_EXP(KRB5_TKTBODY, realm, 		ASN1_GENERALSTRING, 1),
-	ASN1_EXP(KRB5_TKTBODY, sname,		KRB5_PRINCNAME,	  2),
-	ASN1_EXP(KRB5_TKTBODY, encdata,		KRB5_ENCDATA,	  3)
-} ASN1_SEQUENCE_END(KRB5_TKTBODY)
-
-IMPLEMENT_ASN1_FUNCTIONS(KRB5_TKTBODY)
-
-
-ASN1_ITEM_TEMPLATE(KRB5_TICKET) = 
-	ASN1_EX_TEMPLATE_TYPE(ASN1_TFLG_EXPTAG|ASN1_TFLG_APPLICATION, 1,
-			KRB5_TICKET, KRB5_TKTBODY)
-ASN1_ITEM_TEMPLATE_END(KRB5_TICKET)
-
-IMPLEMENT_ASN1_FUNCTIONS(KRB5_TICKET)
-
-
-/* [APPLICATION 14] = 0x6e */
-ASN1_SEQUENCE(KRB5_APREQBODY) = {
-	ASN1_EXP(KRB5_APREQBODY, pvno,		ASN1_INTEGER,	  0),
-	ASN1_EXP(KRB5_APREQBODY, msgtype,	ASN1_INTEGER,	  1),
-	ASN1_EXP(KRB5_APREQBODY, apoptions,	ASN1_BIT_STRING,  2),
-	ASN1_EXP(KRB5_APREQBODY, ticket, 	KRB5_TICKET,	  3),
-	ASN1_EXP(KRB5_APREQBODY, authenticator,	KRB5_ENCDATA,	  4),
-} ASN1_SEQUENCE_END(KRB5_APREQBODY)
-
-IMPLEMENT_ASN1_FUNCTIONS(KRB5_APREQBODY)
-
-ASN1_ITEM_TEMPLATE(KRB5_APREQ) = 
-	ASN1_EX_TEMPLATE_TYPE(ASN1_TFLG_EXPTAG|ASN1_TFLG_APPLICATION, 14,
-			KRB5_APREQ, KRB5_APREQBODY)
-ASN1_ITEM_TEMPLATE_END(KRB5_APREQ)
-
-IMPLEMENT_ASN1_FUNCTIONS(KRB5_APREQ)
-
-
-/*  Authenticator stuff 	*/
-
-ASN1_SEQUENCE(KRB5_CHECKSUM) = {
-	ASN1_EXP(KRB5_CHECKSUM, ctype,		ASN1_INTEGER,	  0),
-	ASN1_EXP(KRB5_CHECKSUM, checksum,	ASN1_OCTET_STRING,1)
-} ASN1_SEQUENCE_END(KRB5_CHECKSUM)
-
-IMPLEMENT_ASN1_FUNCTIONS(KRB5_CHECKSUM)
-
-
-ASN1_SEQUENCE(KRB5_ENCKEY) = {
-	ASN1_EXP(KRB5_ENCKEY,	ktype,		ASN1_INTEGER,	  0),
-	ASN1_EXP(KRB5_ENCKEY,	keyvalue,	ASN1_OCTET_STRING,1)
-} ASN1_SEQUENCE_END(KRB5_ENCKEY)
-
-IMPLEMENT_ASN1_FUNCTIONS(KRB5_ENCKEY)
-
-
-/* SEQ OF SEQ; see ASN1_EXP_SEQUENCE_OF_OPT() below */
-ASN1_SEQUENCE(KRB5_AUTHDATA) = {
-	ASN1_EXP(KRB5_AUTHDATA,	adtype,		ASN1_INTEGER,	  0),
-	ASN1_EXP(KRB5_AUTHDATA,	addata, 	ASN1_OCTET_STRING,1)
-} ASN1_SEQUENCE_END(KRB5_AUTHDATA)
-
-IMPLEMENT_ASN1_FUNCTIONS(KRB5_AUTHDATA)
-
-
-/* [APPLICATION 2] = 0x62 */
-ASN1_SEQUENCE(KRB5_AUTHENTBODY) = {
-	ASN1_EXP(KRB5_AUTHENTBODY,	avno,	ASN1_INTEGER,	  0),
-	ASN1_EXP(KRB5_AUTHENTBODY,	crealm,	ASN1_GENERALSTRING, 1),
-	ASN1_EXP(KRB5_AUTHENTBODY,	cname,	KRB5_PRINCNAME,	  2),
-	ASN1_EXP_OPT(KRB5_AUTHENTBODY,	cksum,	KRB5_CHECKSUM,	  3),
-	ASN1_EXP(KRB5_AUTHENTBODY,	cusec,	ASN1_INTEGER,	  4),
-	ASN1_EXP(KRB5_AUTHENTBODY,	ctime,	ASN1_GENERALIZEDTIME, 5),
-	ASN1_EXP_OPT(KRB5_AUTHENTBODY,	subkey,	KRB5_ENCKEY,	  6),
-	ASN1_EXP_OPT(KRB5_AUTHENTBODY,	seqnum,	ASN1_INTEGER,	  7),
-	ASN1_EXP_SEQUENCE_OF_OPT
-		    (KRB5_AUTHENTBODY,	authorization,	KRB5_AUTHDATA, 8),
-} ASN1_SEQUENCE_END(KRB5_AUTHENTBODY)
-
-IMPLEMENT_ASN1_FUNCTIONS(KRB5_AUTHENTBODY)
-
-ASN1_ITEM_TEMPLATE(KRB5_AUTHENT) = 
-	ASN1_EX_TEMPLATE_TYPE(ASN1_TFLG_EXPTAG|ASN1_TFLG_APPLICATION, 2,
-			KRB5_AUTHENT, KRB5_AUTHENTBODY)
-ASN1_ITEM_TEMPLATE_END(KRB5_AUTHENT)
-
-IMPLEMENT_ASN1_FUNCTIONS(KRB5_AUTHENT)
-
diff --git a/crypto/openssl/crypto/krb5/krb5_asn.h b/crypto/openssl/crypto/krb5/krb5_asn.h
deleted file mode 100644
index 41725d0dc44e..000000000000
--- a/crypto/openssl/crypto/krb5/krb5_asn.h
+++ /dev/null
@@ -1,256 +0,0 @@
-/* krb5_asn.h */
-/* Written by Vern Staats <staatsvr@asc.hpc.mil> for the OpenSSL project,
-** using ocsp/{*.h,*asn*.c} as a starting point
-*/
-
-/* ====================================================================
- * Copyright (c) 1998-2000 The OpenSSL Project.  All rights reserved.
- *
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions
- * are met:
- *
- * 1. Redistributions of source code must retain the above copyright
- *    notice, this list of conditions and the following disclaimer. 
- *
- * 2. Redistributions in binary form must reproduce the above copyright
- *    notice, this list of conditions and the following disclaimer in
- *    the documentation and/or other materials provided with the
- *    distribution.
- *
- * 3. All advertising materials mentioning features or use of this
- *    software must display the following acknowledgment:
- *    "This product includes software developed by the OpenSSL Project
- *    for use in the OpenSSL Toolkit. (http://www.openssl.org/)"
- *
- * 4. The names "OpenSSL Toolkit" and "OpenSSL Project" must not be used to
- *    endorse or promote products derived from this software without
- *    prior written permission. For written permission, please contact
- *    openssl-core@openssl.org.
- *
- * 5. Products derived from this software may not be called "OpenSSL"
- *    nor may "OpenSSL" appear in their names without prior written
- *    permission of the OpenSSL Project.
- *
- * 6. Redistributions of any form whatsoever must retain the following
- *    acknowledgment:
- *    "This product includes software developed by the OpenSSL Project
- *    for use in the OpenSSL Toolkit (http://www.openssl.org/)"
- *
- * THIS SOFTWARE IS PROVIDED BY THE OpenSSL PROJECT ``AS IS'' AND ANY
- * EXPRESSED OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
- * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR
- * PURPOSE ARE DISCLAIMED.  IN NO EVENT SHALL THE OpenSSL PROJECT OR
- * ITS CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
- * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
- * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
- * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
- * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
- * STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
- * ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED
- * OF THE POSSIBILITY OF SUCH DAMAGE.
- * ====================================================================
- *
- * This product includes cryptographic software written by Eric Young
- * (eay@cryptsoft.com).  This product includes software written by Tim
- * Hudson (tjh@cryptsoft.com).
- *
- */
-
-#ifndef HEADER_KRB5_ASN_H
-#define HEADER_KRB5_ASN_H
-
-/*
-#include <krb5.h>
-*/
-#include <openssl/safestack.h>
-
-#ifdef  __cplusplus
-extern "C" {
-#endif
-
-
-/*	ASN.1 from Kerberos RFC 1510
-*/
-
-/*	EncryptedData ::=   SEQUENCE {
-**		etype[0]                      INTEGER, -- EncryptionType
-**		kvno[1]                       INTEGER OPTIONAL,
-**		cipher[2]                     OCTET STRING -- ciphertext
-**	}
-*/
-typedef	struct	krb5_encdata_st
-	{
-	ASN1_INTEGER			*etype;
-	ASN1_INTEGER			*kvno;
-	ASN1_OCTET_STRING		*cipher;
-	}	KRB5_ENCDATA;
-
-DECLARE_STACK_OF(KRB5_ENCDATA)
-
-/*	PrincipalName ::=   SEQUENCE {
-**		name-type[0]                  INTEGER,
-**		name-string[1]                SEQUENCE OF GeneralString
-**	}
-*/
-typedef	struct	krb5_princname_st
-	{
-	ASN1_INTEGER			*nametype;
-	STACK_OF(ASN1_GENERALSTRING)	*namestring;
-	}	KRB5_PRINCNAME;
-
-DECLARE_STACK_OF(KRB5_PRINCNAME)
-
-
-/*	Ticket ::=	[APPLICATION 1] SEQUENCE {
-**		tkt-vno[0]                    INTEGER,
-**		realm[1]                      Realm,
-**		sname[2]                      PrincipalName,
-**		enc-part[3]                   EncryptedData
-**	}
-*/
-typedef	struct	krb5_tktbody_st
-	{
-	ASN1_INTEGER			*tktvno;
-	ASN1_GENERALSTRING		*realm;
-	KRB5_PRINCNAME			*sname;
-	KRB5_ENCDATA			*encdata;
-	}	KRB5_TKTBODY;
-
-typedef STACK_OF(KRB5_TKTBODY) KRB5_TICKET;
-DECLARE_STACK_OF(KRB5_TKTBODY)
-
-
-/*	AP-REQ ::=      [APPLICATION 14] SEQUENCE {
-**		pvno[0]                       INTEGER,
-**		msg-type[1]                   INTEGER,
-**		ap-options[2]                 APOptions,
-**		ticket[3]                     Ticket,
-**		authenticator[4]              EncryptedData
-**	}
-**
-**	APOptions ::=   BIT STRING {
-**		reserved(0), use-session-key(1), mutual-required(2) }
-*/
-typedef	struct	krb5_ap_req_st
-	{
-	ASN1_INTEGER			*pvno;
-	ASN1_INTEGER			*msgtype;
-	ASN1_BIT_STRING			*apoptions;
-	KRB5_TICKET			*ticket;
-	KRB5_ENCDATA			*authenticator;
-	}	KRB5_APREQBODY;
-
-typedef STACK_OF(KRB5_APREQBODY) KRB5_APREQ;
-DECLARE_STACK_OF(KRB5_APREQBODY)
-
-
-/*	Authenticator Stuff	*/
-
-
-/*	Checksum ::=   SEQUENCE {
-**		cksumtype[0]                  INTEGER,
-**		checksum[1]                   OCTET STRING
-**	}
-*/
-typedef	struct	krb5_checksum_st
-	{
-	ASN1_INTEGER			*ctype;
-	ASN1_OCTET_STRING		*checksum;
-	}	KRB5_CHECKSUM;
-
-DECLARE_STACK_OF(KRB5_CHECKSUM)
-
-
-/*	EncryptionKey ::=   SEQUENCE {
-**		keytype[0]                    INTEGER,
-**		keyvalue[1]                   OCTET STRING
-**	}
-*/
-typedef struct  krb5_encryptionkey_st
-	{
-	ASN1_INTEGER			*ktype;
-	ASN1_OCTET_STRING		*keyvalue;
-	}	KRB5_ENCKEY;
-
-DECLARE_STACK_OF(KRB5_ENCKEY)
-
-
-/*	AuthorizationData ::=   SEQUENCE OF SEQUENCE {
-**		ad-type[0]                    INTEGER,
-**              ad-data[1]                    OCTET STRING
-**	}
-*/
-typedef struct	krb5_authorization_st
-	{
-	ASN1_INTEGER			*adtype;
-	ASN1_OCTET_STRING		*addata;
-	}	KRB5_AUTHDATA;
-
-DECLARE_STACK_OF(KRB5_AUTHDATA)
-
-			
-/*	-- Unencrypted authenticator
-**	Authenticator ::=    [APPLICATION 2] SEQUENCE    {
-**		authenticator-vno[0]          INTEGER,
-**		crealm[1]                     Realm,
-**		cname[2]                      PrincipalName,
-**		cksum[3]                      Checksum OPTIONAL,
-**		cusec[4]                      INTEGER,
-**		ctime[5]                      KerberosTime,
-**		subkey[6]                     EncryptionKey OPTIONAL,
-**		seq-number[7]                 INTEGER OPTIONAL,
-**		authorization-data[8]         AuthorizationData OPTIONAL
-**	}
-*/
-typedef struct	krb5_authenticator_st
-	{
-	ASN1_INTEGER			*avno;
-	ASN1_GENERALSTRING		*crealm;
-	KRB5_PRINCNAME			*cname;
-	KRB5_CHECKSUM			*cksum;
-	ASN1_INTEGER			*cusec;
-	ASN1_GENERALIZEDTIME		*ctime;
-	KRB5_ENCKEY			*subkey;
-	ASN1_INTEGER			*seqnum;
-	KRB5_AUTHDATA			*authorization;
-	}	KRB5_AUTHENTBODY;
-
-typedef STACK_OF(KRB5_AUTHENTBODY) KRB5_AUTHENT;
-DECLARE_STACK_OF(KRB5_AUTHENTBODY)
-
-
-/*  DECLARE_ASN1_FUNCTIONS(type) = DECLARE_ASN1_FUNCTIONS_name(type, type) =
-**	type *name##_new(void);
-**	void name##_free(type *a);
-**	DECLARE_ASN1_ENCODE_FUNCTIONS(type, name, name) =
-**	 DECLARE_ASN1_ENCODE_FUNCTIONS(type, itname, name) =
-**	  type *d2i_##name(type **a, const unsigned char **in, long len);
-**	  int i2d_##name(type *a, unsigned char **out);
-**	  DECLARE_ASN1_ITEM(itname) = OPENSSL_EXTERN const ASN1_ITEM itname##_it
-*/
-
-DECLARE_ASN1_FUNCTIONS(KRB5_ENCDATA)
-DECLARE_ASN1_FUNCTIONS(KRB5_PRINCNAME)
-DECLARE_ASN1_FUNCTIONS(KRB5_TKTBODY)
-DECLARE_ASN1_FUNCTIONS(KRB5_APREQBODY)
-DECLARE_ASN1_FUNCTIONS(KRB5_TICKET)
-DECLARE_ASN1_FUNCTIONS(KRB5_APREQ)
-
-DECLARE_ASN1_FUNCTIONS(KRB5_CHECKSUM)
-DECLARE_ASN1_FUNCTIONS(KRB5_ENCKEY)
-DECLARE_ASN1_FUNCTIONS(KRB5_AUTHDATA)
-DECLARE_ASN1_FUNCTIONS(KRB5_AUTHENTBODY)
-DECLARE_ASN1_FUNCTIONS(KRB5_AUTHENT)
-
-
-/* BEGIN ERROR CODES */
-/* The following lines are auto generated by the script mkerr.pl. Any changes
- * made after this point may be overwritten when the script is next run.
- */
-
-#ifdef  __cplusplus
-}
-#endif
-#endif
-
diff --git a/crypto/openssl/crypto/lhash/Makefile b/crypto/openssl/crypto/lhash/Makefile
deleted file mode 100644
index 82bddac47450..000000000000
--- a/crypto/openssl/crypto/lhash/Makefile
+++ /dev/null
@@ -1,88 +0,0 @@
-#
-# OpenSSL/crypto/lhash/Makefile
-#
-
-DIR=	lhash
-TOP=	../..
-CC=	cc
-INCLUDES=
-CFLAG=-g
-MAKEFILE=	Makefile
-AR=		ar r
-
-CFLAGS= $(INCLUDES) $(CFLAG)
-
-GENERAL=Makefile
-TEST=
-APPS=
-
-LIB=$(TOP)/libcrypto.a
-LIBSRC=lhash.c lh_stats.c
-LIBOBJ=lhash.o lh_stats.o
-
-SRC= $(LIBSRC)
-
-EXHEADER= lhash.h
-HEADER=	$(EXHEADER)
-
-ALL=    $(GENERAL) $(SRC) $(HEADER)
-
-top:
-	(cd ../..; $(MAKE) DIRS=crypto SDIRS=$(DIR) sub_all)
-
-all:	lib
-
-lib:	$(LIBOBJ)
-	$(AR) $(LIB) $(LIBOBJ)
-	$(RANLIB) $(LIB) || echo Never mind.
-	@touch lib
-
-files:
-	$(PERL) $(TOP)/util/files.pl Makefile >> $(TOP)/MINFO
-
-links:
-	@$(PERL) $(TOP)/util/mklink.pl ../../include/openssl $(EXHEADER)
-	@$(PERL) $(TOP)/util/mklink.pl ../../test $(TEST)
-	@$(PERL) $(TOP)/util/mklink.pl ../../apps $(APPS)
-
-install:
-	@[ -n "$(INSTALLTOP)" ] # should be set by top Makefile...
-	@headerlist="$(EXHEADER)"; for i in $$headerlist ; \
-	do  \
-	(cp $$i $(INSTALL_PREFIX)$(INSTALLTOP)/include/openssl/$$i; \
-	chmod 644 $(INSTALL_PREFIX)$(INSTALLTOP)/include/openssl/$$i ); \
-	done;
-
-tags:
-	ctags $(SRC)
-
-tests:
-
-lint:
-	lint -DLINT $(INCLUDES) $(SRC)>fluff
-
-depend:
-	@[ -n "$(MAKEDEPEND)" ] # should be set by upper Makefile...
-	$(MAKEDEPEND) -- $(CFLAG) $(INCLUDES) $(DEPFLAG) -- $(PROGS) $(LIBSRC)
-
-dclean:
-	$(PERL) -pe 'if (/^# DO NOT DELETE THIS LINE/) {print; exit(0);}' $(MAKEFILE) >Makefile.new
-	mv -f Makefile.new $(MAKEFILE)
-
-clean:
-	rm -f *.o *.obj lib tags core .pure .nfs* *.old *.bak fluff
-
-# DO NOT DELETE THIS LINE -- make depend depends on it.
-
-lh_stats.o: ../../e_os.h ../../include/openssl/bio.h
-lh_stats.o: ../../include/openssl/buffer.h ../../include/openssl/crypto.h
-lh_stats.o: ../../include/openssl/e_os2.h ../../include/openssl/err.h
-lh_stats.o: ../../include/openssl/lhash.h ../../include/openssl/opensslconf.h
-lh_stats.o: ../../include/openssl/opensslv.h ../../include/openssl/ossl_typ.h
-lh_stats.o: ../../include/openssl/safestack.h ../../include/openssl/stack.h
-lh_stats.o: ../../include/openssl/symhacks.h ../cryptlib.h lh_stats.c
-lhash.o: ../../include/openssl/bio.h ../../include/openssl/crypto.h
-lhash.o: ../../include/openssl/e_os2.h ../../include/openssl/lhash.h
-lhash.o: ../../include/openssl/opensslconf.h ../../include/openssl/opensslv.h
-lhash.o: ../../include/openssl/ossl_typ.h ../../include/openssl/safestack.h
-lhash.o: ../../include/openssl/stack.h ../../include/openssl/symhacks.h lhash.c
diff --git a/crypto/openssl/crypto/lhash/lh_stats.c b/crypto/openssl/crypto/lhash/lh_stats.c
deleted file mode 100644
index 5aa7766aa61b..000000000000
--- a/crypto/openssl/crypto/lhash/lh_stats.c
+++ /dev/null
@@ -1,248 +0,0 @@
-/* crypto/lhash/lh_stats.c */
-/* Copyright (C) 1995-1998 Eric Young (eay@cryptsoft.com)
- * All rights reserved.
- *
- * This package is an SSL implementation written
- * by Eric Young (eay@cryptsoft.com).
- * The implementation was written so as to conform with Netscapes SSL.
- * 
- * This library is free for commercial and non-commercial use as long as
- * the following conditions are aheared to.  The following conditions
- * apply to all code found in this distribution, be it the RC4, RSA,
- * lhash, DES, etc., code; not just the SSL code.  The SSL documentation
- * included with this distribution is covered by the same copyright terms
- * except that the holder is Tim Hudson (tjh@cryptsoft.com).
- * 
- * Copyright remains Eric Young's, and as such any Copyright notices in
- * the code are not to be removed.
- * If this package is used in a product, Eric Young should be given attribution
- * as the author of the parts of the library used.
- * This can be in the form of a textual message at program startup or
- * in documentation (online or textual) provided with the package.
- * 
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions
- * are met:
- * 1. Redistributions of source code must retain the copyright
- *    notice, this list of conditions and the following disclaimer.
- * 2. Redistributions in binary form must reproduce the above copyright
- *    notice, this list of conditions and the following disclaimer in the
- *    documentation and/or other materials provided with the distribution.
- * 3. All advertising materials mentioning features or use of this software
- *    must display the following acknowledgement:
- *    "This product includes cryptographic software written by
- *     Eric Young (eay@cryptsoft.com)"
- *    The word 'cryptographic' can be left out if the rouines from the library
- *    being used are not cryptographic related :-).
- * 4. If you include any Windows specific code (or a derivative thereof) from 
- *    the apps directory (application code) you must include an acknowledgement:
- *    "This product includes software written by Tim Hudson (tjh@cryptsoft.com)"
- * 
- * THIS SOFTWARE IS PROVIDED BY ERIC YOUNG ``AS IS'' AND
- * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
- * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
- * ARE DISCLAIMED.  IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE
- * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
- * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
- * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
- * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
- * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
- * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
- * SUCH DAMAGE.
- * 
- * The licence and distribution terms for any publically available version or
- * derivative of this code cannot be changed.  i.e. this code cannot simply be
- * copied and put under another distribution licence
- * [including the GNU Public Licence.]
- */
-
-#include <stdio.h>
-#include <string.h>
-#include <stdlib.h>
-/* If you wish to build this outside of SSLeay, remove the following lines
- * and things should work as expected */
-#include "cryptlib.h"
-
-#ifndef OPENSSL_NO_BIO
-#include <openssl/bio.h>
-#endif
-#include <openssl/lhash.h>
-
-#ifdef OPENSSL_NO_BIO
-
-void lh_stats(LHASH *lh, FILE *out)
-	{
-	fprintf(out,"num_items             = %lu\n",lh->num_items);
-	fprintf(out,"num_nodes             = %u\n",lh->num_nodes);
-	fprintf(out,"num_alloc_nodes       = %u\n",lh->num_alloc_nodes);
-	fprintf(out,"num_expands           = %lu\n",lh->num_expands);
-	fprintf(out,"num_expand_reallocs   = %lu\n",lh->num_expand_reallocs);
-	fprintf(out,"num_contracts         = %lu\n",lh->num_contracts);
-	fprintf(out,"num_contract_reallocs = %lu\n",lh->num_contract_reallocs);
-	fprintf(out,"num_hash_calls        = %lu\n",lh->num_hash_calls);
-	fprintf(out,"num_comp_calls        = %lu\n",lh->num_comp_calls);
-	fprintf(out,"num_insert            = %lu\n",lh->num_insert);
-	fprintf(out,"num_replace           = %lu\n",lh->num_replace);
-	fprintf(out,"num_delete            = %lu\n",lh->num_delete);
-	fprintf(out,"num_no_delete         = %lu\n",lh->num_no_delete);
-	fprintf(out,"num_retrieve          = %lu\n",lh->num_retrieve);
-	fprintf(out,"num_retrieve_miss     = %lu\n",lh->num_retrieve_miss);
-	fprintf(out,"num_hash_comps        = %lu\n",lh->num_hash_comps);
-#if 0
-	fprintf(out,"p                     = %u\n",lh->p);
-	fprintf(out,"pmax                  = %u\n",lh->pmax);
-	fprintf(out,"up_load               = %lu\n",lh->up_load);
-	fprintf(out,"down_load             = %lu\n",lh->down_load);
-#endif
-	}
-
-void lh_node_stats(LHASH *lh, FILE *out)
-	{
-	LHASH_NODE *n;
-	unsigned int i,num;
-
-	for (i=0; i<lh->num_nodes; i++)
-		{
-		for (n=lh->b[i],num=0; n != NULL; n=n->next)
-			num++;
-		fprintf(out,"node %6u -> %3u\n",i,num);
-		}
-	}
-
-void lh_node_usage_stats(LHASH *lh, FILE *out)
-	{
-	LHASH_NODE *n;
-	unsigned long num;
-	unsigned int i;
-	unsigned long total=0,n_used=0;
-
-	for (i=0; i<lh->num_nodes; i++)
-		{
-		for (n=lh->b[i],num=0; n != NULL; n=n->next)
-			num++;
-		if (num != 0)
-			{
-			n_used++;
-			total+=num;
-			}
-		}
-	fprintf(out,"%lu nodes used out of %u\n",n_used,lh->num_nodes);
-	fprintf(out,"%lu items\n",total);
-	if (n_used == 0) return;
-	fprintf(out,"load %d.%02d  actual load %d.%02d\n",
-		(int)(total/lh->num_nodes),
-		(int)((total%lh->num_nodes)*100/lh->num_nodes),
-		(int)(total/n_used),
-		(int)((total%n_used)*100/n_used));
-	}
-
-#else
-
-#ifndef OPENSSL_NO_FP_API
-void lh_stats(const LHASH *lh, FILE *fp)
-	{
-	BIO *bp;
-
-	bp=BIO_new(BIO_s_file());
-	if (bp == NULL) goto end;
-	BIO_set_fp(bp,fp,BIO_NOCLOSE);
-	lh_stats_bio(lh,bp);
-	BIO_free(bp);
-end:;
-	}
-
-void lh_node_stats(const LHASH *lh, FILE *fp)
-	{
-	BIO *bp;
-
-	bp=BIO_new(BIO_s_file());
-	if (bp == NULL) goto end;
-	BIO_set_fp(bp,fp,BIO_NOCLOSE);
-	lh_node_stats_bio(lh,bp);
-	BIO_free(bp);
-end:;
-	}
-
-void lh_node_usage_stats(const LHASH *lh, FILE *fp)
-	{
-	BIO *bp;
-
-	bp=BIO_new(BIO_s_file());
-	if (bp == NULL) goto end;
-	BIO_set_fp(bp,fp,BIO_NOCLOSE);
-	lh_node_usage_stats_bio(lh,bp);
-	BIO_free(bp);
-end:;
-	}
-
-#endif
-
-void lh_stats_bio(const LHASH *lh, BIO *out)
-	{
-	BIO_printf(out,"num_items             = %lu\n",lh->num_items);
-	BIO_printf(out,"num_nodes             = %u\n",lh->num_nodes);
-	BIO_printf(out,"num_alloc_nodes       = %u\n",lh->num_alloc_nodes);
-	BIO_printf(out,"num_expands           = %lu\n",lh->num_expands);
-	BIO_printf(out,"num_expand_reallocs   = %lu\n",
-		   lh->num_expand_reallocs);
-	BIO_printf(out,"num_contracts         = %lu\n",lh->num_contracts);
-	BIO_printf(out,"num_contract_reallocs = %lu\n",
-		   lh->num_contract_reallocs);
-	BIO_printf(out,"num_hash_calls        = %lu\n",lh->num_hash_calls);
-	BIO_printf(out,"num_comp_calls        = %lu\n",lh->num_comp_calls);
-	BIO_printf(out,"num_insert            = %lu\n",lh->num_insert);
-	BIO_printf(out,"num_replace           = %lu\n",lh->num_replace);
-	BIO_printf(out,"num_delete            = %lu\n",lh->num_delete);
-	BIO_printf(out,"num_no_delete         = %lu\n",lh->num_no_delete);
-	BIO_printf(out,"num_retrieve          = %lu\n",lh->num_retrieve);
-	BIO_printf(out,"num_retrieve_miss     = %lu\n",lh->num_retrieve_miss);
-	BIO_printf(out,"num_hash_comps        = %lu\n",lh->num_hash_comps);
-#if 0
-	BIO_printf(out,"p                     = %u\n",lh->p);
-	BIO_printf(out,"pmax                  = %u\n",lh->pmax);
-	BIO_printf(out,"up_load               = %lu\n",lh->up_load);
-	BIO_printf(out,"down_load             = %lu\n",lh->down_load);
-#endif
-	}
-
-void lh_node_stats_bio(const LHASH *lh, BIO *out)
-	{
-	LHASH_NODE *n;
-	unsigned int i,num;
-
-	for (i=0; i<lh->num_nodes; i++)
-		{
-		for (n=lh->b[i],num=0; n != NULL; n=n->next)
-			num++;
-		BIO_printf(out,"node %6u -> %3u\n",i,num);
-		}
-	}
-
-void lh_node_usage_stats_bio(const LHASH *lh, BIO *out)
-	{
-	LHASH_NODE *n;
-	unsigned long num;
-	unsigned int i;
-	unsigned long total=0,n_used=0;
-
-	for (i=0; i<lh->num_nodes; i++)
-		{
-		for (n=lh->b[i],num=0; n != NULL; n=n->next)
-			num++;
-		if (num != 0)
-			{
-			n_used++;
-			total+=num;
-			}
-		}
-	BIO_printf(out,"%lu nodes used out of %u\n",n_used,lh->num_nodes);
-	BIO_printf(out,"%lu items\n",total);
-	if (n_used == 0) return;
-	BIO_printf(out,"load %d.%02d  actual load %d.%02d\n",
-		   (int)(total/lh->num_nodes),
-		   (int)((total%lh->num_nodes)*100/lh->num_nodes),
-		   (int)(total/n_used),
-		   (int)((total%n_used)*100/n_used));
-	}
-
-#endif
diff --git a/crypto/openssl/crypto/lhash/lh_test.c b/crypto/openssl/crypto/lhash/lh_test.c
deleted file mode 100644
index 85700c859bf3..000000000000
--- a/crypto/openssl/crypto/lhash/lh_test.c
+++ /dev/null
@@ -1,88 +0,0 @@
-/* crypto/lhash/lh_test.c */
-/* Copyright (C) 1995-1998 Eric Young (eay@cryptsoft.com)
- * All rights reserved.
- *
- * This package is an SSL implementation written
- * by Eric Young (eay@cryptsoft.com).
- * The implementation was written so as to conform with Netscapes SSL.
- * 
- * This library is free for commercial and non-commercial use as long as
- * the following conditions are aheared to.  The following conditions
- * apply to all code found in this distribution, be it the RC4, RSA,
- * lhash, DES, etc., code; not just the SSL code.  The SSL documentation
- * included with this distribution is covered by the same copyright terms
- * except that the holder is Tim Hudson (tjh@cryptsoft.com).
- * 
- * Copyright remains Eric Young's, and as such any Copyright notices in
- * the code are not to be removed.
- * If this package is used in a product, Eric Young should be given attribution
- * as the author of the parts of the library used.
- * This can be in the form of a textual message at program startup or
- * in documentation (online or textual) provided with the package.
- * 
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions
- * are met:
- * 1. Redistributions of source code must retain the copyright
- *    notice, this list of conditions and the following disclaimer.
- * 2. Redistributions in binary form must reproduce the above copyright
- *    notice, this list of conditions and the following disclaimer in the
- *    documentation and/or other materials provided with the distribution.
- * 3. All advertising materials mentioning features or use of this software
- *    must display the following acknowledgement:
- *    "This product includes cryptographic software written by
- *     Eric Young (eay@cryptsoft.com)"
- *    The word 'cryptographic' can be left out if the rouines from the library
- *    being used are not cryptographic related :-).
- * 4. If you include any Windows specific code (or a derivative thereof) from 
- *    the apps directory (application code) you must include an acknowledgement:
- *    "This product includes software written by Tim Hudson (tjh@cryptsoft.com)"
- * 
- * THIS SOFTWARE IS PROVIDED BY ERIC YOUNG ``AS IS'' AND
- * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
- * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
- * ARE DISCLAIMED.  IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE
- * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
- * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
- * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
- * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
- * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
- * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
- * SUCH DAMAGE.
- * 
- * The licence and distribution terms for any publically available version or
- * derivative of this code cannot be changed.  i.e. this code cannot simply be
- * copied and put under another distribution licence
- * [including the GNU Public Licence.]
- */
-
-#include <stdio.h>
-#include <stdlib.h>
-#include <string.h>
-#include <openssl/lhash.h>
-
-main()
-	{
-	LHASH *conf;
-	char buf[256];
-	int i;
-
-	conf=lh_new(lh_strhash,strcmp);
-	for (;;)
-		{
-		char *p;
-
-		buf[0]='\0';
-		fgets(buf,256,stdin);
-		if (buf[0] == '\0') break;
-		i=strlen(buf);
-		p=OPENSSL_malloc(i+1);
-		memcpy(p,buf,i+1);
-		lh_insert(conf,p);
-		}
-
-	lh_node_stats(conf,stdout);
-	lh_stats(conf,stdout);
-	lh_node_usage_stats(conf,stdout);
-	exit(0);
-	}
diff --git a/crypto/openssl/crypto/lhash/lhash.c b/crypto/openssl/crypto/lhash/lhash.c
deleted file mode 100644
index 04ea80203cc8..000000000000
--- a/crypto/openssl/crypto/lhash/lhash.c
+++ /dev/null
@@ -1,470 +0,0 @@
-/* crypto/lhash/lhash.c */
-/* Copyright (C) 1995-1998 Eric Young (eay@cryptsoft.com)
- * All rights reserved.
- *
- * This package is an SSL implementation written
- * by Eric Young (eay@cryptsoft.com).
- * The implementation was written so as to conform with Netscapes SSL.
- * 
- * This library is free for commercial and non-commercial use as long as
- * the following conditions are aheared to.  The following conditions
- * apply to all code found in this distribution, be it the RC4, RSA,
- * lhash, DES, etc., code; not just the SSL code.  The SSL documentation
- * included with this distribution is covered by the same copyright terms
- * except that the holder is Tim Hudson (tjh@cryptsoft.com).
- * 
- * Copyright remains Eric Young's, and as such any Copyright notices in
- * the code are not to be removed.
- * If this package is used in a product, Eric Young should be given attribution
- * as the author of the parts of the library used.
- * This can be in the form of a textual message at program startup or
- * in documentation (online or textual) provided with the package.
- * 
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions
- * are met:
- * 1. Redistributions of source code must retain the copyright
- *    notice, this list of conditions and the following disclaimer.
- * 2. Redistributions in binary form must reproduce the above copyright
- *    notice, this list of conditions and the following disclaimer in the
- *    documentation and/or other materials provided with the distribution.
- * 3. All advertising materials mentioning features or use of this software
- *    must display the following acknowledgement:
- *    "This product includes cryptographic software written by
- *     Eric Young (eay@cryptsoft.com)"
- *    The word 'cryptographic' can be left out if the rouines from the library
- *    being used are not cryptographic related :-).
- * 4. If you include any Windows specific code (or a derivative thereof) from 
- *    the apps directory (application code) you must include an acknowledgement:
- *    "This product includes software written by Tim Hudson (tjh@cryptsoft.com)"
- * 
- * THIS SOFTWARE IS PROVIDED BY ERIC YOUNG ``AS IS'' AND
- * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
- * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
- * ARE DISCLAIMED.  IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE
- * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
- * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
- * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
- * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
- * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
- * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
- * SUCH DAMAGE.
- * 
- * The licence and distribution terms for any publically available version or
- * derivative of this code cannot be changed.  i.e. this code cannot simply be
- * copied and put under another distribution licence
- * [including the GNU Public Licence.]
- */
-
-/* Code for dynamic hash table routines
- * Author - Eric Young v 2.0
- *
- * 2.2 eay - added #include "crypto.h" so the memory leak checking code is
- *	     present. eay 18-Jun-98
- *
- * 2.1 eay - Added an 'error in last operation' flag. eay 6-May-98
- *
- * 2.0 eay - Fixed a bug that occurred when using lh_delete
- *	     from inside lh_doall().  As entries were deleted,
- *	     the 'table' was 'contract()ed', making some entries
- *	     jump from the end of the table to the start, there by
- *	     skipping the lh_doall() processing. eay - 4/12/95
- *
- * 1.9 eay - Fixed a memory leak in lh_free, the LHASH_NODEs
- *	     were not being free()ed. 21/11/95
- *
- * 1.8 eay - Put the stats routines into a separate file, lh_stats.c
- *	     19/09/95
- *
- * 1.7 eay - Removed the fputs() for realloc failures - the code
- *           should silently tolerate them.  I have also fixed things
- *           lint complained about 04/05/95
- *
- * 1.6 eay - Fixed an invalid pointers in contract/expand 27/07/92
- *
- * 1.5 eay - Fixed a misuse of realloc in expand 02/03/1992
- *
- * 1.4 eay - Fixed lh_doall so the function can call lh_delete 28/05/91
- *
- * 1.3 eay - Fixed a few lint problems 19/3/1991
- *
- * 1.2 eay - Fixed lh_doall problem 13/3/1991
- *
- * 1.1 eay - Added lh_doall
- *
- * 1.0 eay - First version
- */
-#include <stdio.h>
-#include <string.h>
-#include <stdlib.h>
-#include <openssl/crypto.h>
-#include <openssl/lhash.h>
-
-const char lh_version[]="lhash" OPENSSL_VERSION_PTEXT;
-
-#undef MIN_NODES 
-#define MIN_NODES	16
-#define UP_LOAD		(2*LH_LOAD_MULT) /* load times 256  (default 2) */
-#define DOWN_LOAD	(LH_LOAD_MULT)   /* load times 256  (default 1) */
-
-static void expand(LHASH *lh);
-static void contract(LHASH *lh);
-static LHASH_NODE **getrn(LHASH *lh, const void *data, unsigned long *rhash);
-
-LHASH *lh_new(LHASH_HASH_FN_TYPE h, LHASH_COMP_FN_TYPE c)
-	{
-	LHASH *ret;
-	int i;
-
-	if ((ret=(LHASH *)OPENSSL_malloc(sizeof(LHASH))) == NULL)
-		goto err0;
-	if ((ret->b=(LHASH_NODE **)OPENSSL_malloc(sizeof(LHASH_NODE *)*MIN_NODES)) == NULL)
-		goto err1;
-	for (i=0; i<MIN_NODES; i++)
-		ret->b[i]=NULL;
-	ret->comp=((c == NULL)?(LHASH_COMP_FN_TYPE)strcmp:c);
-	ret->hash=((h == NULL)?(LHASH_HASH_FN_TYPE)lh_strhash:h);
-	ret->num_nodes=MIN_NODES/2;
-	ret->num_alloc_nodes=MIN_NODES;
-	ret->p=0;
-	ret->pmax=MIN_NODES/2;
-	ret->up_load=UP_LOAD;
-	ret->down_load=DOWN_LOAD;
-	ret->num_items=0;
-
-	ret->num_expands=0;
-	ret->num_expand_reallocs=0;
-	ret->num_contracts=0;
-	ret->num_contract_reallocs=0;
-	ret->num_hash_calls=0;
-	ret->num_comp_calls=0;
-	ret->num_insert=0;
-	ret->num_replace=0;
-	ret->num_delete=0;
-	ret->num_no_delete=0;
-	ret->num_retrieve=0;
-	ret->num_retrieve_miss=0;
-	ret->num_hash_comps=0;
-
-	ret->error=0;
-	return(ret);
-err1:
-	OPENSSL_free(ret);
-err0:
-	return(NULL);
-	}
-
-void lh_free(LHASH *lh)
-	{
-	unsigned int i;
-	LHASH_NODE *n,*nn;
-
-	if (lh == NULL)
-	    return;
-
-	for (i=0; i<lh->num_nodes; i++)
-		{
-		n=lh->b[i];
-		while (n != NULL)
-			{
-			nn=n->next;
-			OPENSSL_free(n);
-			n=nn;
-			}
-		}
-	OPENSSL_free(lh->b);
-	OPENSSL_free(lh);
-	}
-
-void *lh_insert(LHASH *lh, void *data)
-	{
-	unsigned long hash;
-	LHASH_NODE *nn,**rn;
-	void *ret;
-
-	lh->error=0;
-	if (lh->up_load <= (lh->num_items*LH_LOAD_MULT/lh->num_nodes))
-		expand(lh);
-
-	rn=getrn(lh,data,&hash);
-
-	if (*rn == NULL)
-		{
-		if ((nn=(LHASH_NODE *)OPENSSL_malloc(sizeof(LHASH_NODE))) == NULL)
-			{
-			lh->error++;
-			return(NULL);
-			}
-		nn->data=data;
-		nn->next=NULL;
-#ifndef OPENSSL_NO_HASH_COMP
-		nn->hash=hash;
-#endif
-		*rn=nn;
-		ret=NULL;
-		lh->num_insert++;
-		lh->num_items++;
-		}
-	else /* replace same key */
-		{
-		ret= (*rn)->data;
-		(*rn)->data=data;
-		lh->num_replace++;
-		}
-	return(ret);
-	}
-
-void *lh_delete(LHASH *lh, const void *data)
-	{
-	unsigned long hash;
-	LHASH_NODE *nn,**rn;
-	void *ret;
-
-	lh->error=0;
-	rn=getrn(lh,data,&hash);
-
-	if (*rn == NULL)
-		{
-		lh->num_no_delete++;
-		return(NULL);
-		}
-	else
-		{
-		nn= *rn;
-		*rn=nn->next;
-		ret=nn->data;
-		OPENSSL_free(nn);
-		lh->num_delete++;
-		}
-
-	lh->num_items--;
-	if ((lh->num_nodes > MIN_NODES) &&
-		(lh->down_load >= (lh->num_items*LH_LOAD_MULT/lh->num_nodes)))
-		contract(lh);
-
-	return(ret);
-	}
-
-void *lh_retrieve(LHASH *lh, const void *data)
-	{
-	unsigned long hash;
-	LHASH_NODE **rn;
-	void *ret;
-
-	lh->error=0;
-	rn=getrn(lh,data,&hash);
-
-	if (*rn == NULL)
-		{
-		lh->num_retrieve_miss++;
-		return(NULL);
-		}
-	else
-		{
-		ret= (*rn)->data;
-		lh->num_retrieve++;
-		}
-	return(ret);
-	}
-
-static void doall_util_fn(LHASH *lh, int use_arg, LHASH_DOALL_FN_TYPE func,
-			  LHASH_DOALL_ARG_FN_TYPE func_arg, void *arg)
-	{
-	int i;
-	LHASH_NODE *a,*n;
-
-	/* reverse the order so we search from 'top to bottom'
-	 * We were having memory leaks otherwise */
-	for (i=lh->num_nodes-1; i>=0; i--)
-		{
-		a=lh->b[i];
-		while (a != NULL)
-			{
-			/* 28/05/91 - eay - n added so items can be deleted
-			 * via lh_doall */
-			n=a->next;
-			if(use_arg)
-				func_arg(a->data,arg);
-			else
-				func(a->data);
-			a=n;
-			}
-		}
-	}
-
-void lh_doall(LHASH *lh, LHASH_DOALL_FN_TYPE func)
-	{
-	doall_util_fn(lh, 0, func, (LHASH_DOALL_ARG_FN_TYPE)0, NULL);
-	}
-
-void lh_doall_arg(LHASH *lh, LHASH_DOALL_ARG_FN_TYPE func, void *arg)
-	{
-	doall_util_fn(lh, 1, (LHASH_DOALL_FN_TYPE)0, func, arg);
-	}
-
-static void expand(LHASH *lh)
-	{
-	LHASH_NODE **n,**n1,**n2,*np;
-	unsigned int p,i,j;
-	unsigned long hash,nni;
-
-	lh->num_nodes++;
-	lh->num_expands++;
-	p=(int)lh->p++;
-	n1= &(lh->b[p]);
-	n2= &(lh->b[p+(int)lh->pmax]);
-	*n2=NULL;        /* 27/07/92 - eay - undefined pointer bug */
-	nni=lh->num_alloc_nodes;
-	
-	for (np= *n1; np != NULL; )
-		{
-#ifndef OPENSSL_NO_HASH_COMP
-		hash=np->hash;
-#else
-		hash=lh->hash(np->data);
-		lh->num_hash_calls++;
-#endif
-		if ((hash%nni) != p)
-			{ /* move it */
-			*n1= (*n1)->next;
-			np->next= *n2;
-			*n2=np;
-			}
-		else
-			n1= &((*n1)->next);
-		np= *n1;
-		}
-
-	if ((lh->p) >= lh->pmax)
-		{
-		j=(int)lh->num_alloc_nodes*2;
-		n=(LHASH_NODE **)OPENSSL_realloc(lh->b,
-			(int)(sizeof(LHASH_NODE *)*j));
-		if (n == NULL)
-			{
-/*			fputs("realloc error in lhash",stderr); */
-			lh->error++;
-			lh->p=0;
-			return;
-			}
-		/* else */
-		for (i=(int)lh->num_alloc_nodes; i<j; i++)/* 26/02/92 eay */
-			n[i]=NULL;			  /* 02/03/92 eay */
-		lh->pmax=lh->num_alloc_nodes;
-		lh->num_alloc_nodes=j;
-		lh->num_expand_reallocs++;
-		lh->p=0;
-		lh->b=n;
-		}
-	}
-
-static void contract(LHASH *lh)
-	{
-	LHASH_NODE **n,*n1,*np;
-
-	np=lh->b[lh->p+lh->pmax-1];
-	lh->b[lh->p+lh->pmax-1]=NULL; /* 24/07-92 - eay - weird but :-( */
-	if (lh->p == 0)
-		{
-		n=(LHASH_NODE **)OPENSSL_realloc(lh->b,
-			(unsigned int)(sizeof(LHASH_NODE *)*lh->pmax));
-		if (n == NULL)
-			{
-/*			fputs("realloc error in lhash",stderr); */
-			lh->error++;
-			return;
-			}
-		lh->num_contract_reallocs++;
-		lh->num_alloc_nodes/=2;
-		lh->pmax/=2;
-		lh->p=lh->pmax-1;
-		lh->b=n;
-		}
-	else
-		lh->p--;
-
-	lh->num_nodes--;
-	lh->num_contracts++;
-
-	n1=lh->b[(int)lh->p];
-	if (n1 == NULL)
-		lh->b[(int)lh->p]=np;
-	else
-		{
-		while (n1->next != NULL)
-			n1=n1->next;
-		n1->next=np;
-		}
-	}
-
-static LHASH_NODE **getrn(LHASH *lh, const void *data, unsigned long *rhash)
-	{
-	LHASH_NODE **ret,*n1;
-	unsigned long hash,nn;
-	LHASH_COMP_FN_TYPE cf;
-
-	hash=(*(lh->hash))(data);
-	lh->num_hash_calls++;
-	*rhash=hash;
-
-	nn=hash%lh->pmax;
-	if (nn < lh->p)
-		nn=hash%lh->num_alloc_nodes;
-
-	cf=lh->comp;
-	ret= &(lh->b[(int)nn]);
-	for (n1= *ret; n1 != NULL; n1=n1->next)
-		{
-#ifndef OPENSSL_NO_HASH_COMP
-		lh->num_hash_comps++;
-		if (n1->hash != hash)
-			{
-			ret= &(n1->next);
-			continue;
-			}
-#endif
-		lh->num_comp_calls++;
-		if(cf(n1->data,data) == 0)
-			break;
-		ret= &(n1->next);
-		}
-	return(ret);
-	}
-
-/* The following hash seems to work very well on normal text strings
- * no collisions on /usr/dict/words and it distributes on %2^n quite
- * well, not as good as MD5, but still good.
- */
-unsigned long lh_strhash(const char *c)
-	{
-	unsigned long ret=0;
-	long n;
-	unsigned long v;
-	int r;
-
-	if ((c == NULL) || (*c == '\0'))
-		return(ret);
-/*
-	unsigned char b[16];
-	MD5(c,strlen(c),b);
-	return(b[0]|(b[1]<<8)|(b[2]<<16)|(b[3]<<24)); 
-*/
-
-	n=0x100;
-	while (*c)
-		{
-		v=n|(*c);
-		n+=0x100;
-		r= (int)((v>>2)^v)&0x0f;
-		ret=(ret<<r)|(ret>>(32-r));
-		ret&=0xFFFFFFFFL;
-		ret^=v*v;
-		c++;
-		}
-	return((ret>>16)^ret);
-	}
-
-unsigned long lh_num_items(const LHASH *lh)
-	{
-	return lh ? lh->num_items : 0;
-	}
diff --git a/crypto/openssl/crypto/lhash/lhash.h b/crypto/openssl/crypto/lhash/lhash.h
deleted file mode 100644
index d392d0cd80d7..000000000000
--- a/crypto/openssl/crypto/lhash/lhash.h
+++ /dev/null
@@ -1,200 +0,0 @@
-/* crypto/lhash/lhash.h */
-/* Copyright (C) 1995-1998 Eric Young (eay@cryptsoft.com)
- * All rights reserved.
- *
- * This package is an SSL implementation written
- * by Eric Young (eay@cryptsoft.com).
- * The implementation was written so as to conform with Netscapes SSL.
- * 
- * This library is free for commercial and non-commercial use as long as
- * the following conditions are aheared to.  The following conditions
- * apply to all code found in this distribution, be it the RC4, RSA,
- * lhash, DES, etc., code; not just the SSL code.  The SSL documentation
- * included with this distribution is covered by the same copyright terms
- * except that the holder is Tim Hudson (tjh@cryptsoft.com).
- * 
- * Copyright remains Eric Young's, and as such any Copyright notices in
- * the code are not to be removed.
- * If this package is used in a product, Eric Young should be given attribution
- * as the author of the parts of the library used.
- * This can be in the form of a textual message at program startup or
- * in documentation (online or textual) provided with the package.
- * 
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions
- * are met:
- * 1. Redistributions of source code must retain the copyright
- *    notice, this list of conditions and the following disclaimer.
- * 2. Redistributions in binary form must reproduce the above copyright
- *    notice, this list of conditions and the following disclaimer in the
- *    documentation and/or other materials provided with the distribution.
- * 3. All advertising materials mentioning features or use of this software
- *    must display the following acknowledgement:
- *    "This product includes cryptographic software written by
- *     Eric Young (eay@cryptsoft.com)"
- *    The word 'cryptographic' can be left out if the rouines from the library
- *    being used are not cryptographic related :-).
- * 4. If you include any Windows specific code (or a derivative thereof) from 
- *    the apps directory (application code) you must include an acknowledgement:
- *    "This product includes software written by Tim Hudson (tjh@cryptsoft.com)"
- * 
- * THIS SOFTWARE IS PROVIDED BY ERIC YOUNG ``AS IS'' AND
- * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
- * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
- * ARE DISCLAIMED.  IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE
- * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
- * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
- * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
- * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
- * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
- * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
- * SUCH DAMAGE.
- * 
- * The licence and distribution terms for any publically available version or
- * derivative of this code cannot be changed.  i.e. this code cannot simply be
- * copied and put under another distribution licence
- * [including the GNU Public Licence.]
- */
-
-/* Header for dynamic hash table routines
- * Author - Eric Young
- */
-
-#ifndef HEADER_LHASH_H
-#define HEADER_LHASH_H
-
-#include <openssl/e_os2.h>
-#ifndef OPENSSL_NO_FP_API
-#include <stdio.h>
-#endif
-
-#ifndef OPENSSL_NO_BIO
-#include <openssl/bio.h>
-#endif
-
-#ifdef  __cplusplus
-extern "C" {
-#endif
-
-typedef struct lhash_node_st
-	{
-	void *data;
-	struct lhash_node_st *next;
-#ifndef OPENSSL_NO_HASH_COMP
-	unsigned long hash;
-#endif
-	} LHASH_NODE;
-
-typedef int (*LHASH_COMP_FN_TYPE)(const void *, const void *);
-typedef unsigned long (*LHASH_HASH_FN_TYPE)(const void *);
-typedef void (*LHASH_DOALL_FN_TYPE)(void *);
-typedef void (*LHASH_DOALL_ARG_FN_TYPE)(void *, void *);
-
-/* Macros for declaring and implementing type-safe wrappers for LHASH callbacks.
- * This way, callbacks can be provided to LHASH structures without function
- * pointer casting and the macro-defined callbacks provide per-variable casting
- * before deferring to the underlying type-specific callbacks. NB: It is
- * possible to place a "static" in front of both the DECLARE and IMPLEMENT
- * macros if the functions are strictly internal. */
-
-/* First: "hash" functions */
-#define DECLARE_LHASH_HASH_FN(f_name,o_type) \
-	unsigned long f_name##_LHASH_HASH(const void *);
-#define IMPLEMENT_LHASH_HASH_FN(f_name,o_type) \
-	unsigned long f_name##_LHASH_HASH(const void *arg) { \
-		o_type a = (o_type)arg; \
-		return f_name(a); }
-#define LHASH_HASH_FN(f_name) f_name##_LHASH_HASH
-
-/* Second: "compare" functions */
-#define DECLARE_LHASH_COMP_FN(f_name,o_type) \
-	int f_name##_LHASH_COMP(const void *, const void *);
-#define IMPLEMENT_LHASH_COMP_FN(f_name,o_type) \
-	int f_name##_LHASH_COMP(const void *arg1, const void *arg2) { \
-		o_type a = (o_type)arg1; \
-		o_type b = (o_type)arg2; \
-		return f_name(a,b); }
-#define LHASH_COMP_FN(f_name) f_name##_LHASH_COMP
-
-/* Third: "doall" functions */
-#define DECLARE_LHASH_DOALL_FN(f_name,o_type) \
-	void f_name##_LHASH_DOALL(void *);
-#define IMPLEMENT_LHASH_DOALL_FN(f_name,o_type) \
-	void f_name##_LHASH_DOALL(void *arg) { \
-		o_type a = (o_type)arg; \
-		f_name(a); }
-#define LHASH_DOALL_FN(f_name) f_name##_LHASH_DOALL
-
-/* Fourth: "doall_arg" functions */
-#define DECLARE_LHASH_DOALL_ARG_FN(f_name,o_type,a_type) \
-	void f_name##_LHASH_DOALL_ARG(void *, void *);
-#define IMPLEMENT_LHASH_DOALL_ARG_FN(f_name,o_type,a_type) \
-	void f_name##_LHASH_DOALL_ARG(void *arg1, void *arg2) { \
-		o_type a = (o_type)arg1; \
-		a_type b = (a_type)arg2; \
-		f_name(a,b); }
-#define LHASH_DOALL_ARG_FN(f_name) f_name##_LHASH_DOALL_ARG
-
-typedef struct lhash_st
-	{
-	LHASH_NODE **b;
-	LHASH_COMP_FN_TYPE comp;
-	LHASH_HASH_FN_TYPE hash;
-	unsigned int num_nodes;
-	unsigned int num_alloc_nodes;
-	unsigned int p;
-	unsigned int pmax;
-	unsigned long up_load; /* load times 256 */
-	unsigned long down_load; /* load times 256 */
-	unsigned long num_items;
-
-	unsigned long num_expands;
-	unsigned long num_expand_reallocs;
-	unsigned long num_contracts;
-	unsigned long num_contract_reallocs;
-	unsigned long num_hash_calls;
-	unsigned long num_comp_calls;
-	unsigned long num_insert;
-	unsigned long num_replace;
-	unsigned long num_delete;
-	unsigned long num_no_delete;
-	unsigned long num_retrieve;
-	unsigned long num_retrieve_miss;
-	unsigned long num_hash_comps;
-
-	int error;
-	} LHASH;
-
-#define LH_LOAD_MULT	256
-
-/* Indicates a malloc() error in the last call, this is only bad
- * in lh_insert(). */
-#define lh_error(lh)	((lh)->error)
-
-LHASH *lh_new(LHASH_HASH_FN_TYPE h, LHASH_COMP_FN_TYPE c);
-void lh_free(LHASH *lh);
-void *lh_insert(LHASH *lh, void *data);
-void *lh_delete(LHASH *lh, const void *data);
-void *lh_retrieve(LHASH *lh, const void *data);
-void lh_doall(LHASH *lh, LHASH_DOALL_FN_TYPE func);
-void lh_doall_arg(LHASH *lh, LHASH_DOALL_ARG_FN_TYPE func, void *arg);
-unsigned long lh_strhash(const char *c);
-unsigned long lh_num_items(const LHASH *lh);
-
-#ifndef OPENSSL_NO_FP_API
-void lh_stats(const LHASH *lh, FILE *out);
-void lh_node_stats(const LHASH *lh, FILE *out);
-void lh_node_usage_stats(const LHASH *lh, FILE *out);
-#endif
-
-#ifndef OPENSSL_NO_BIO
-void lh_stats_bio(const LHASH *lh, BIO *out);
-void lh_node_stats_bio(const LHASH *lh, BIO *out);
-void lh_node_usage_stats_bio(const LHASH *lh, BIO *out);
-#endif
-#ifdef  __cplusplus
-}
-#endif
-
-#endif
-
diff --git a/crypto/openssl/crypto/lhash/num.pl b/crypto/openssl/crypto/lhash/num.pl
deleted file mode 100644
index 30fedf9cd5ad..000000000000
--- a/crypto/openssl/crypto/lhash/num.pl
+++ /dev/null
@@ -1,17 +0,0 @@
-#!/usr/local/bin/perl
-
-#node     10 ->   4
-
-while (<>)
-	{
-	next unless /^node/;
-	chop;
-	@a=split;
-	$num{$a[3]}++;
-	}
-
-@a=sort {$a <=> $b } keys %num;
-foreach (0 .. $a[$#a])
-	{
-	printf "%4d:%4d\n",$_,$num{$_};
-	}
diff --git a/crypto/openssl/crypto/md2/Makefile b/crypto/openssl/crypto/md2/Makefile
deleted file mode 100644
index 17f878aeb7d4..000000000000
--- a/crypto/openssl/crypto/md2/Makefile
+++ /dev/null
@@ -1,89 +0,0 @@
-#
-# OpenSSL/crypto/md/Makefile
-#
-
-DIR=	md2
-TOP=	../..
-CC=	cc
-INCLUDES=
-CFLAG=-g
-MAKEFILE=	Makefile
-AR=		ar r
-
-CFLAGS= $(INCLUDES) $(CFLAG)
-
-GENERAL=Makefile
-TEST=md2test.c
-APPS=
-
-LIB=$(TOP)/libcrypto.a
-LIBSRC=md2_dgst.c md2_one.c
-LIBOBJ=md2_dgst.o md2_one.o
-
-SRC= $(LIBSRC)
-
-EXHEADER= md2.h
-HEADER=	$(EXHEADER)
-
-ALL=    $(GENERAL) $(SRC) $(HEADER)
-
-top:
-	(cd ../..; $(MAKE) DIRS=crypto SDIRS=$(DIR) sub_all)
-
-all:	lib
-
-lib:	$(LIBOBJ)
-	$(AR) $(LIB) $(LIBOBJ)
-	$(RANLIB) $(LIB) || echo Never mind.
-	@touch lib
-
-files:
-	$(PERL) $(TOP)/util/files.pl Makefile >> $(TOP)/MINFO
-
-links:
-	@$(PERL) $(TOP)/util/mklink.pl ../../include/openssl $(EXHEADER)
-	@$(PERL) $(TOP)/util/mklink.pl ../../test $(TEST)
-	@$(PERL) $(TOP)/util/mklink.pl ../../apps $(APPS)
-
-install:
-	@[ -n "$(INSTALLTOP)" ] # should be set by top Makefile...
-	@headerlist="$(EXHEADER)"; for i in $$headerlist ; \
-	do  \
-	(cp $$i $(INSTALL_PREFIX)$(INSTALLTOP)/include/openssl/$$i; \
-	chmod 644 $(INSTALL_PREFIX)$(INSTALLTOP)/include/openssl/$$i ); \
-	done;
-
-tags:
-	ctags $(SRC)
-
-tests:
-
-lint:
-	lint -DLINT $(INCLUDES) $(SRC)>fluff
-
-depend:
-	@[ -n "$(MAKEDEPEND)" ] # should be set by upper Makefile...
-	$(MAKEDEPEND) -- $(CFLAG) $(INCLUDES) $(DEPFLAG) -- $(PROGS) $(LIBSRC)
-
-dclean:
-	$(PERL) -pe 'if (/^# DO NOT DELETE THIS LINE/) {print; exit(0);}' $(MAKEFILE) >Makefile.new
-	mv -f Makefile.new $(MAKEFILE)
-
-clean:
-	rm -f *.o *.obj lib tags core .pure .nfs* *.old *.bak fluff
-
-# DO NOT DELETE THIS LINE -- make depend depends on it.
-
-md2_dgst.o: ../../include/openssl/crypto.h ../../include/openssl/e_os2.h
-md2_dgst.o: ../../include/openssl/md2.h ../../include/openssl/opensslconf.h
-md2_dgst.o: ../../include/openssl/opensslv.h ../../include/openssl/ossl_typ.h
-md2_dgst.o: ../../include/openssl/safestack.h ../../include/openssl/stack.h
-md2_dgst.o: ../../include/openssl/symhacks.h md2_dgst.c
-md2_one.o: ../../e_os.h ../../include/openssl/bio.h
-md2_one.o: ../../include/openssl/buffer.h ../../include/openssl/crypto.h
-md2_one.o: ../../include/openssl/e_os2.h ../../include/openssl/err.h
-md2_one.o: ../../include/openssl/lhash.h ../../include/openssl/md2.h
-md2_one.o: ../../include/openssl/opensslconf.h ../../include/openssl/opensslv.h
-md2_one.o: ../../include/openssl/ossl_typ.h ../../include/openssl/safestack.h
-md2_one.o: ../../include/openssl/stack.h ../../include/openssl/symhacks.h
-md2_one.o: ../cryptlib.h md2_one.c
diff --git a/crypto/openssl/crypto/md2/md2.c b/crypto/openssl/crypto/md2/md2.c
deleted file mode 100644
index f4d6f62264b3..000000000000
--- a/crypto/openssl/crypto/md2/md2.c
+++ /dev/null
@@ -1,124 +0,0 @@
-/* crypto/md2/md2.c */
-/* Copyright (C) 1995-1998 Eric Young (eay@cryptsoft.com)
- * All rights reserved.
- *
- * This package is an SSL implementation written
- * by Eric Young (eay@cryptsoft.com).
- * The implementation was written so as to conform with Netscapes SSL.
- * 
- * This library is free for commercial and non-commercial use as long as
- * the following conditions are aheared to.  The following conditions
- * apply to all code found in this distribution, be it the RC4, RSA,
- * lhash, DES, etc., code; not just the SSL code.  The SSL documentation
- * included with this distribution is covered by the same copyright terms
- * except that the holder is Tim Hudson (tjh@cryptsoft.com).
- * 
- * Copyright remains Eric Young's, and as such any Copyright notices in
- * the code are not to be removed.
- * If this package is used in a product, Eric Young should be given attribution
- * as the author of the parts of the library used.
- * This can be in the form of a textual message at program startup or
- * in documentation (online or textual) provided with the package.
- * 
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions
- * are met:
- * 1. Redistributions of source code must retain the copyright
- *    notice, this list of conditions and the following disclaimer.
- * 2. Redistributions in binary form must reproduce the above copyright
- *    notice, this list of conditions and the following disclaimer in the
- *    documentation and/or other materials provided with the distribution.
- * 3. All advertising materials mentioning features or use of this software
- *    must display the following acknowledgement:
- *    "This product includes cryptographic software written by
- *     Eric Young (eay@cryptsoft.com)"
- *    The word 'cryptographic' can be left out if the rouines from the library
- *    being used are not cryptographic related :-).
- * 4. If you include any Windows specific code (or a derivative thereof) from 
- *    the apps directory (application code) you must include an acknowledgement:
- *    "This product includes software written by Tim Hudson (tjh@cryptsoft.com)"
- * 
- * THIS SOFTWARE IS PROVIDED BY ERIC YOUNG ``AS IS'' AND
- * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
- * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
- * ARE DISCLAIMED.  IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE
- * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
- * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
- * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
- * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
- * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
- * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
- * SUCH DAMAGE.
- * 
- * The licence and distribution terms for any publically available version or
- * derivative of this code cannot be changed.  i.e. this code cannot simply be
- * copied and put under another distribution licence
- * [including the GNU Public Licence.]
- */
-
-#include <stdio.h>
-#include <stdlib.h>
-#include <openssl/md2.h>
-
-#define BUFSIZE	1024*16
-
-void do_fp(FILE *f);
-void pt(unsigned char *md);
-int read(int, void *, unsigned int);
-void exit(int);
-int main(int argc, char *argv[])
-	{
-	int i,err=0;
-	FILE *IN;
-
-	if (argc == 1)
-		{
-		do_fp(stdin);
-		}
-	else
-		{
-		for (i=1; i<argc; i++)
-			{
-			IN=fopen(argv[i],"r");
-			if (IN == NULL)
-				{
-				perror(argv[i]);
-				err++;
-				continue;
-				}
-			printf("MD2(%s)= ",argv[i]);
-			do_fp(IN);
-			fclose(IN);
-			}
-		}
-	exit(err);
-	return(err);
-	}
-
-void do_fp(FILE *f)
-	{
-	MD2_CTX c;
-	unsigned char md[MD2_DIGEST_LENGTH];
-	int fd,i;
-	static unsigned char buf[BUFSIZE];
-
-	fd=fileno(f);
-	MD2_Init(&c);
-	for (;;)
-		{
-		i=read(fd,buf,BUFSIZE);
-		if (i <= 0) break;
-		MD2_Update(&c,buf,(unsigned long)i);
-		}
-	MD2_Final(&(md[0]),&c);
-	pt(md);
-	}
-
-void pt(unsigned char *md)
-	{
-	int i;
-
-	for (i=0; i<MD2_DIGEST_LENGTH; i++)
-		printf("%02x",md[i]);
-	printf("\n");
-	}
diff --git a/crypto/openssl/crypto/md2/md2.h b/crypto/openssl/crypto/md2/md2.h
deleted file mode 100644
index a46120e7d418..000000000000
--- a/crypto/openssl/crypto/md2/md2.h
+++ /dev/null
@@ -1,92 +0,0 @@
-/* crypto/md/md2.h */
-/* Copyright (C) 1995-1997 Eric Young (eay@cryptsoft.com)
- * All rights reserved.
- *
- * This package is an SSL implementation written
- * by Eric Young (eay@cryptsoft.com).
- * The implementation was written so as to conform with Netscapes SSL.
- * 
- * This library is free for commercial and non-commercial use as long as
- * the following conditions are aheared to.  The following conditions
- * apply to all code found in this distribution, be it the RC4, RSA,
- * lhash, DES, etc., code; not just the SSL code.  The SSL documentation
- * included with this distribution is covered by the same copyright terms
- * except that the holder is Tim Hudson (tjh@cryptsoft.com).
- * 
- * Copyright remains Eric Young's, and as such any Copyright notices in
- * the code are not to be removed.
- * If this package is used in a product, Eric Young should be given attribution
- * as the author of the parts of the library used.
- * This can be in the form of a textual message at program startup or
- * in documentation (online or textual) provided with the package.
- * 
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions
- * are met:
- * 1. Redistributions of source code must retain the copyright
- *    notice, this list of conditions and the following disclaimer.
- * 2. Redistributions in binary form must reproduce the above copyright
- *    notice, this list of conditions and the following disclaimer in the
- *    documentation and/or other materials provided with the distribution.
- * 3. All advertising materials mentioning features or use of this software
- *    must display the following acknowledgement:
- *    "This product includes cryptographic software written by
- *     Eric Young (eay@cryptsoft.com)"
- *    The word 'cryptographic' can be left out if the rouines from the library
- *    being used are not cryptographic related :-).
- * 4. If you include any Windows specific code (or a derivative thereof) from 
- *    the apps directory (application code) you must include an acknowledgement:
- *    "This product includes software written by Tim Hudson (tjh@cryptsoft.com)"
- * 
- * THIS SOFTWARE IS PROVIDED BY ERIC YOUNG ``AS IS'' AND
- * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
- * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
- * ARE DISCLAIMED.  IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE
- * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
- * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
- * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
- * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
- * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
- * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
- * SUCH DAMAGE.
- * 
- * The licence and distribution terms for any publically available version or
- * derivative of this code cannot be changed.  i.e. this code cannot simply be
- * copied and put under another distribution licence
- * [including the GNU Public Licence.]
- */
-
-#ifndef HEADER_MD2_H
-#define HEADER_MD2_H
-
-#include <openssl/opensslconf.h> /* OPENSSL_NO_MD2, MD2_INT */
-#ifdef OPENSSL_NO_MD2
-#error MD2 is disabled.
-#endif
-#include <stddef.h>
-
-#define MD2_DIGEST_LENGTH	16
-#define MD2_BLOCK       	16
-
-#ifdef  __cplusplus
-extern "C" {
-#endif
-
-typedef struct MD2state_st
-	{
-	unsigned int num;
-	unsigned char data[MD2_BLOCK];
-	MD2_INT cksm[MD2_BLOCK];
-	MD2_INT state[MD2_BLOCK];
-	} MD2_CTX;
-
-const char *MD2_options(void);
-int MD2_Init(MD2_CTX *c);
-int MD2_Update(MD2_CTX *c, const unsigned char *data, size_t len);
-int MD2_Final(unsigned char *md, MD2_CTX *c);
-unsigned char *MD2(const unsigned char *d, size_t n,unsigned char *md);
-#ifdef  __cplusplus
-}
-#endif
-
-#endif
diff --git a/crypto/openssl/crypto/md2/md2_dgst.c b/crypto/openssl/crypto/md2/md2_dgst.c
deleted file mode 100644
index 6f68b25c6a8f..000000000000
--- a/crypto/openssl/crypto/md2/md2_dgst.c
+++ /dev/null
@@ -1,227 +0,0 @@
-/* crypto/md2/md2_dgst.c */
-/* Copyright (C) 1995-1998 Eric Young (eay@cryptsoft.com)
- * All rights reserved.
- *
- * This package is an SSL implementation written
- * by Eric Young (eay@cryptsoft.com).
- * The implementation was written so as to conform with Netscapes SSL.
- * 
- * This library is free for commercial and non-commercial use as long as
- * the following conditions are aheared to.  The following conditions
- * apply to all code found in this distribution, be it the RC4, RSA,
- * lhash, DES, etc., code; not just the SSL code.  The SSL documentation
- * included with this distribution is covered by the same copyright terms
- * except that the holder is Tim Hudson (tjh@cryptsoft.com).
- * 
- * Copyright remains Eric Young's, and as such any Copyright notices in
- * the code are not to be removed.
- * If this package is used in a product, Eric Young should be given attribution
- * as the author of the parts of the library used.
- * This can be in the form of a textual message at program startup or
- * in documentation (online or textual) provided with the package.
- * 
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions
- * are met:
- * 1. Redistributions of source code must retain the copyright
- *    notice, this list of conditions and the following disclaimer.
- * 2. Redistributions in binary form must reproduce the above copyright
- *    notice, this list of conditions and the following disclaimer in the
- *    documentation and/or other materials provided with the distribution.
- * 3. All advertising materials mentioning features or use of this software
- *    must display the following acknowledgement:
- *    "This product includes cryptographic software written by
- *     Eric Young (eay@cryptsoft.com)"
- *    The word 'cryptographic' can be left out if the rouines from the library
- *    being used are not cryptographic related :-).
- * 4. If you include any Windows specific code (or a derivative thereof) from 
- *    the apps directory (application code) you must include an acknowledgement:
- *    "This product includes software written by Tim Hudson (tjh@cryptsoft.com)"
- * 
- * THIS SOFTWARE IS PROVIDED BY ERIC YOUNG ``AS IS'' AND
- * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
- * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
- * ARE DISCLAIMED.  IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE
- * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
- * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
- * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
- * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
- * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
- * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
- * SUCH DAMAGE.
- * 
- * The licence and distribution terms for any publically available version or
- * derivative of this code cannot be changed.  i.e. this code cannot simply be
- * copied and put under another distribution licence
- * [including the GNU Public Licence.]
- */
-
-#include <stdio.h>
-#include <stdlib.h>
-#include <string.h>
-#include <openssl/md2.h>
-#include <openssl/opensslv.h>
-#include <openssl/crypto.h>
-
-const char MD2_version[]="MD2" OPENSSL_VERSION_PTEXT;
-
-/* Implemented from RFC1319 The MD2 Message-Digest Algorithm
- */
-
-#define UCHAR	unsigned char
-
-static void md2_block(MD2_CTX *c, const unsigned char *d);
-/* The magic S table - I have converted it to hex since it is
- * basically just a random byte string. */
-static MD2_INT S[256]={
-	0x29, 0x2E, 0x43, 0xC9, 0xA2, 0xD8, 0x7C, 0x01,
-	0x3D, 0x36, 0x54, 0xA1, 0xEC, 0xF0, 0x06, 0x13,
-	0x62, 0xA7, 0x05, 0xF3, 0xC0, 0xC7, 0x73, 0x8C,
-	0x98, 0x93, 0x2B, 0xD9, 0xBC, 0x4C, 0x82, 0xCA,
-	0x1E, 0x9B, 0x57, 0x3C, 0xFD, 0xD4, 0xE0, 0x16,
-	0x67, 0x42, 0x6F, 0x18, 0x8A, 0x17, 0xE5, 0x12,
-	0xBE, 0x4E, 0xC4, 0xD6, 0xDA, 0x9E, 0xDE, 0x49,
-	0xA0, 0xFB, 0xF5, 0x8E, 0xBB, 0x2F, 0xEE, 0x7A,
-	0xA9, 0x68, 0x79, 0x91, 0x15, 0xB2, 0x07, 0x3F,
-	0x94, 0xC2, 0x10, 0x89, 0x0B, 0x22, 0x5F, 0x21,
-	0x80, 0x7F, 0x5D, 0x9A, 0x5A, 0x90, 0x32, 0x27,
-	0x35, 0x3E, 0xCC, 0xE7, 0xBF, 0xF7, 0x97, 0x03,
-	0xFF, 0x19, 0x30, 0xB3, 0x48, 0xA5, 0xB5, 0xD1,
-	0xD7, 0x5E, 0x92, 0x2A, 0xAC, 0x56, 0xAA, 0xC6,
-	0x4F, 0xB8, 0x38, 0xD2, 0x96, 0xA4, 0x7D, 0xB6,
-	0x76, 0xFC, 0x6B, 0xE2, 0x9C, 0x74, 0x04, 0xF1,
-	0x45, 0x9D, 0x70, 0x59, 0x64, 0x71, 0x87, 0x20,
-	0x86, 0x5B, 0xCF, 0x65, 0xE6, 0x2D, 0xA8, 0x02,
-	0x1B, 0x60, 0x25, 0xAD, 0xAE, 0xB0, 0xB9, 0xF6,
-	0x1C, 0x46, 0x61, 0x69, 0x34, 0x40, 0x7E, 0x0F,
-	0x55, 0x47, 0xA3, 0x23, 0xDD, 0x51, 0xAF, 0x3A,
-	0xC3, 0x5C, 0xF9, 0xCE, 0xBA, 0xC5, 0xEA, 0x26,
-	0x2C, 0x53, 0x0D, 0x6E, 0x85, 0x28, 0x84, 0x09,
-	0xD3, 0xDF, 0xCD, 0xF4, 0x41, 0x81, 0x4D, 0x52,
-	0x6A, 0xDC, 0x37, 0xC8, 0x6C, 0xC1, 0xAB, 0xFA,
-	0x24, 0xE1, 0x7B, 0x08, 0x0C, 0xBD, 0xB1, 0x4A,
-	0x78, 0x88, 0x95, 0x8B, 0xE3, 0x63, 0xE8, 0x6D,
-	0xE9, 0xCB, 0xD5, 0xFE, 0x3B, 0x00, 0x1D, 0x39,
-	0xF2, 0xEF, 0xB7, 0x0E, 0x66, 0x58, 0xD0, 0xE4,
-	0xA6, 0x77, 0x72, 0xF8, 0xEB, 0x75, 0x4B, 0x0A,
-	0x31, 0x44, 0x50, 0xB4, 0x8F, 0xED, 0x1F, 0x1A,
-	0xDB, 0x99, 0x8D, 0x33, 0x9F, 0x11, 0x83, 0x14,
-	};
-
-const char *MD2_options(void)
-	{
-	if (sizeof(MD2_INT) == 1)
-		return("md2(char)");
-	else
-		return("md2(int)");
-	}
-
-int MD2_Init(MD2_CTX *c)
-	{
-	c->num=0;
-	memset(c->state,0,sizeof c->state);
-	memset(c->cksm,0,sizeof c->cksm);
-	memset(c->data,0,sizeof c->data);
-	return 1;
-	}
-
-int MD2_Update(MD2_CTX *c, const unsigned char *data, size_t len)
-	{
-	register UCHAR *p;
-
-	if (len == 0) return 1;
-
-	p=c->data;
-	if (c->num != 0)
-		{
-		if ((c->num+len) >= MD2_BLOCK)
-			{
-			memcpy(&(p[c->num]),data,MD2_BLOCK-c->num);
-			md2_block(c,c->data);
-			data+=(MD2_BLOCK - c->num);
-			len-=(MD2_BLOCK - c->num);
-			c->num=0;
-			/* drop through and do the rest */
-			}
-		else
-			{
-			memcpy(&(p[c->num]),data,len);
-			/* data+=len; */
-			c->num+=(int)len;
-			return 1;
-			}
-		}
-	/* we now can process the input data in blocks of MD2_BLOCK
-	 * chars and save the leftovers to c->data. */
-	while (len >= MD2_BLOCK)
-		{
-		md2_block(c,data);
-		data+=MD2_BLOCK;
-		len-=MD2_BLOCK;
-		}
-	memcpy(p,data,len);
-	c->num=(int)len;
-	return 1;
-	}
-
-static void md2_block(MD2_CTX *c, const unsigned char *d)
-	{
-	register MD2_INT t,*sp1,*sp2;
-	register int i,j;
-	MD2_INT state[48];
-
-	sp1=c->state;
-	sp2=c->cksm;
-	j=sp2[MD2_BLOCK-1];
-	for (i=0; i<16; i++)
-		{
-		state[i]=sp1[i];
-		state[i+16]=t=d[i];
-		state[i+32]=(t^sp1[i]);
-		j=sp2[i]^=S[t^j];
-		}
-	t=0;
-	for (i=0; i<18; i++)
-		{
-		for (j=0; j<48; j+=8)
-			{
-			t= state[j+ 0]^=S[t];
-			t= state[j+ 1]^=S[t];
-			t= state[j+ 2]^=S[t];
-			t= state[j+ 3]^=S[t];
-			t= state[j+ 4]^=S[t];
-			t= state[j+ 5]^=S[t];
-			t= state[j+ 6]^=S[t];
-			t= state[j+ 7]^=S[t];
-			}
-		t=(t+i)&0xff;
-		}
-	memcpy(sp1,state,16*sizeof(MD2_INT));
-	OPENSSL_cleanse(state,48*sizeof(MD2_INT));
-	}
-
-int MD2_Final(unsigned char *md, MD2_CTX *c)
-	{
-	int i,v;
-	register UCHAR *cp;
-	register MD2_INT *p1,*p2;
-
-	cp=c->data;
-	p1=c->state;
-	p2=c->cksm;
-	v=MD2_BLOCK-c->num;
-	for (i=c->num; i<MD2_BLOCK; i++)
-		cp[i]=(UCHAR)v;
-
-	md2_block(c,cp);
-
-	for (i=0; i<MD2_BLOCK; i++)
-		cp[i]=(UCHAR)p2[i];
-	md2_block(c,cp);
-
-	for (i=0; i<16; i++)
-		md[i]=(UCHAR)(p1[i]&0xff);
-	memset((char *)&c,0,sizeof(c));
-	return 1;
-	}
-
diff --git a/crypto/openssl/crypto/md2/md2_one.c b/crypto/openssl/crypto/md2/md2_one.c
deleted file mode 100644
index f7fef5cc0a73..000000000000
--- a/crypto/openssl/crypto/md2/md2_one.c
+++ /dev/null
@@ -1,94 +0,0 @@
-/* crypto/md2/md2_one.c */
-/* Copyright (C) 1995-1998 Eric Young (eay@cryptsoft.com)
- * All rights reserved.
- *
- * This package is an SSL implementation written
- * by Eric Young (eay@cryptsoft.com).
- * The implementation was written so as to conform with Netscapes SSL.
- * 
- * This library is free for commercial and non-commercial use as long as
- * the following conditions are aheared to.  The following conditions
- * apply to all code found in this distribution, be it the RC4, RSA,
- * lhash, DES, etc., code; not just the SSL code.  The SSL documentation
- * included with this distribution is covered by the same copyright terms
- * except that the holder is Tim Hudson (tjh@cryptsoft.com).
- * 
- * Copyright remains Eric Young's, and as such any Copyright notices in
- * the code are not to be removed.
- * If this package is used in a product, Eric Young should be given attribution
- * as the author of the parts of the library used.
- * This can be in the form of a textual message at program startup or
- * in documentation (online or textual) provided with the package.
- * 
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions
- * are met:
- * 1. Redistributions of source code must retain the copyright
- *    notice, this list of conditions and the following disclaimer.
- * 2. Redistributions in binary form must reproduce the above copyright
- *    notice, this list of conditions and the following disclaimer in the
- *    documentation and/or other materials provided with the distribution.
- * 3. All advertising materials mentioning features or use of this software
- *    must display the following acknowledgement:
- *    "This product includes cryptographic software written by
- *     Eric Young (eay@cryptsoft.com)"
- *    The word 'cryptographic' can be left out if the rouines from the library
- *    being used are not cryptographic related :-).
- * 4. If you include any Windows specific code (or a derivative thereof) from 
- *    the apps directory (application code) you must include an acknowledgement:
- *    "This product includes software written by Tim Hudson (tjh@cryptsoft.com)"
- * 
- * THIS SOFTWARE IS PROVIDED BY ERIC YOUNG ``AS IS'' AND
- * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
- * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
- * ARE DISCLAIMED.  IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE
- * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
- * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
- * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
- * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
- * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
- * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
- * SUCH DAMAGE.
- * 
- * The licence and distribution terms for any publically available version or
- * derivative of this code cannot be changed.  i.e. this code cannot simply be
- * copied and put under another distribution licence
- * [including the GNU Public Licence.]
- */
-
-#include <stdio.h>
-#include "cryptlib.h"
-#include <openssl/md2.h>
-
-/* This is a separate file so that #defines in cryptlib.h can
- * map my MD functions to different names */
-
-unsigned char *MD2(const unsigned char *d, size_t n, unsigned char *md)
-	{
-	MD2_CTX c;
-	static unsigned char m[MD2_DIGEST_LENGTH];
-
-	if (md == NULL) md=m;
-	if (!MD2_Init(&c))
-		return NULL;
-#ifndef CHARSET_EBCDIC
-	MD2_Update(&c,d,n);
-#else
-	{
-		char temp[1024];
-		unsigned long chunk;
-
-		while (n > 0)
-		{
-			chunk = (n > sizeof(temp)) ? sizeof(temp) : n;
-			ebcdic2ascii(temp, d, chunk);
-			MD2_Update(&c,temp,chunk);
-			n -= chunk;
-			d += chunk;
-		}
-	}
-#endif
-	MD2_Final(md,&c);
-	OPENSSL_cleanse(&c,sizeof(c));	/* Security consideration */
-	return(md);
-	}
diff --git a/crypto/openssl/crypto/md2/md2test.c b/crypto/openssl/crypto/md2/md2test.c
deleted file mode 100644
index db5f5bc6d20e..000000000000
--- a/crypto/openssl/crypto/md2/md2test.c
+++ /dev/null
@@ -1,143 +0,0 @@
-/* crypto/md2/md2test.c */
-/* Copyright (C) 1995-1998 Eric Young (eay@cryptsoft.com)
- * All rights reserved.
- *
- * This package is an SSL implementation written
- * by Eric Young (eay@cryptsoft.com).
- * The implementation was written so as to conform with Netscapes SSL.
- * 
- * This library is free for commercial and non-commercial use as long as
- * the following conditions are aheared to.  The following conditions
- * apply to all code found in this distribution, be it the RC4, RSA,
- * lhash, DES, etc., code; not just the SSL code.  The SSL documentation
- * included with this distribution is covered by the same copyright terms
- * except that the holder is Tim Hudson (tjh@cryptsoft.com).
- * 
- * Copyright remains Eric Young's, and as such any Copyright notices in
- * the code are not to be removed.
- * If this package is used in a product, Eric Young should be given attribution
- * as the author of the parts of the library used.
- * This can be in the form of a textual message at program startup or
- * in documentation (online or textual) provided with the package.
- * 
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions
- * are met:
- * 1. Redistributions of source code must retain the copyright
- *    notice, this list of conditions and the following disclaimer.
- * 2. Redistributions in binary form must reproduce the above copyright
- *    notice, this list of conditions and the following disclaimer in the
- *    documentation and/or other materials provided with the distribution.
- * 3. All advertising materials mentioning features or use of this software
- *    must display the following acknowledgement:
- *    "This product includes cryptographic software written by
- *     Eric Young (eay@cryptsoft.com)"
- *    The word 'cryptographic' can be left out if the rouines from the library
- *    being used are not cryptographic related :-).
- * 4. If you include any Windows specific code (or a derivative thereof) from 
- *    the apps directory (application code) you must include an acknowledgement:
- *    "This product includes software written by Tim Hudson (tjh@cryptsoft.com)"
- * 
- * THIS SOFTWARE IS PROVIDED BY ERIC YOUNG ``AS IS'' AND
- * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
- * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
- * ARE DISCLAIMED.  IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE
- * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
- * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
- * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
- * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
- * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
- * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
- * SUCH DAMAGE.
- * 
- * The licence and distribution terms for any publically available version or
- * derivative of this code cannot be changed.  i.e. this code cannot simply be
- * copied and put under another distribution licence
- * [including the GNU Public Licence.]
- */
-
-#include <stdio.h>
-#include <stdlib.h>
-#include <string.h>
-
-#include "../e_os.h"
-
-#ifdef OPENSSL_NO_MD2
-int main(int argc, char *argv[])
-{
-    printf("No MD2 support\n");
-    return(0);
-}
-#else
-#include <openssl/evp.h>
-#include <openssl/md2.h>
-
-#ifdef CHARSET_EBCDIC
-#include <openssl/ebcdic.h>
-#endif
-
-static char *test[]={
-	"",
-	"a",
-	"abc",
-	"message digest",
-	"abcdefghijklmnopqrstuvwxyz",
-	"ABCDEFGHIJKLMNOPQRSTUVWXYZabcdefghijklmnopqrstuvwxyz0123456789",
-	"12345678901234567890123456789012345678901234567890123456789012345678901234567890",
-	NULL,
-	};
-
-static char *ret[]={
-	"8350e5a3e24c153df2275c9f80692773",
-	"32ec01ec4a6dac72c0ab96fb34c0b5d1",
-	"da853b0d3f88d99b30283a69e6ded6bb",
-	"ab4f496bfb2a530b219ff33031fe06b0",
-	"4e8ddff3650292ab5a4108c3aa47940b",
-	"da33def2a42df13975352846c30338cd",
-	"d5976f79d83d3a0dc9806c3c66f3efd8",
-	};
-
-static char *pt(unsigned char *md);
-int main(int argc, char *argv[])
-	{
-	int i,err=0;
-	char **P,**R;
-	char *p;
-	unsigned char md[MD2_DIGEST_LENGTH];
-
-	P=test;
-	R=ret;
-	i=1;
-	while (*P != NULL)
-		{
-		EVP_Digest((unsigned char *)*P,strlen(*P),md,NULL,EVP_md2(), NULL);
-		p=pt(md);
-		if (strcmp(p,*R) != 0)
-			{
-			printf("error calculating MD2 on '%s'\n",*P);
-			printf("got %s instead of %s\n",p,*R);
-			err++;
-			}
-		else
-			printf("test %d ok\n",i);
-		i++;
-		R++;
-		P++;
-		}
-#ifdef OPENSSL_SYS_NETWARE
-    if (err) printf("ERROR: %d\n", err);
-#endif
-	EXIT(err);
-	return err;
-	}
-
-static char *pt(unsigned char *md)
-	{
-	int i;
-	static char buf[80];
-
-	for (i=0; i<MD2_DIGEST_LENGTH; i++)
-		sprintf(&(buf[i*2]),"%02x",md[i]);
-	return(buf);
-	}
-#endif
diff --git a/crypto/openssl/crypto/md32_common.h b/crypto/openssl/crypto/md32_common.h
deleted file mode 100644
index 0e625a8e55c0..000000000000
--- a/crypto/openssl/crypto/md32_common.h
+++ /dev/null
@@ -1,623 +0,0 @@
-/* crypto/md32_common.h */
-/* ====================================================================
- * Copyright (c) 1999-2002 The OpenSSL Project.  All rights reserved.
- *
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions
- * are met:
- *
- * 1. Redistributions of source code must retain the above copyright
- *    notice, this list of conditions and the following disclaimer. 
- *
- * 2. Redistributions in binary form must reproduce the above copyright
- *    notice, this list of conditions and the following disclaimer in
- *    the documentation and/or other materials provided with the
- *    distribution.
- *
- * 3. All advertising materials mentioning features or use of this
- *    software must display the following acknowledgment:
- *    "This product includes software developed by the OpenSSL Project
- *    for use in the OpenSSL Toolkit. (http://www.OpenSSL.org/)"
- *
- * 4. The names "OpenSSL Toolkit" and "OpenSSL Project" must not be used to
- *    endorse or promote products derived from this software without
- *    prior written permission. For written permission, please contact
- *    licensing@OpenSSL.org.
- *
- * 5. Products derived from this software may not be called "OpenSSL"
- *    nor may "OpenSSL" appear in their names without prior written
- *    permission of the OpenSSL Project.
- *
- * 6. Redistributions of any form whatsoever must retain the following
- *    acknowledgment:
- *    "This product includes software developed by the OpenSSL Project
- *    for use in the OpenSSL Toolkit (http://www.OpenSSL.org/)"
- *
- * THIS SOFTWARE IS PROVIDED BY THE OpenSSL PROJECT ``AS IS'' AND ANY
- * EXPRESSED OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
- * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR
- * PURPOSE ARE DISCLAIMED.  IN NO EVENT SHALL THE OpenSSL PROJECT OR
- * ITS CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
- * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
- * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
- * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
- * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
- * STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
- * ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED
- * OF THE POSSIBILITY OF SUCH DAMAGE.
- * ====================================================================
- *
- * This product includes cryptographic software written by Eric Young
- * (eay@cryptsoft.com).  This product includes software written by Tim
- * Hudson (tjh@cryptsoft.com).
- *
- */
-
-/*
- * This is a generic 32 bit "collector" for message digest algorithms.
- * Whenever needed it collects input character stream into chunks of
- * 32 bit values and invokes a block function that performs actual hash
- * calculations.
- *
- * Porting guide.
- *
- * Obligatory macros:
- *
- * DATA_ORDER_IS_BIG_ENDIAN or DATA_ORDER_IS_LITTLE_ENDIAN
- *	this macro defines byte order of input stream.
- * HASH_CBLOCK
- *	size of a unit chunk HASH_BLOCK operates on.
- * HASH_LONG
- *	has to be at lest 32 bit wide, if it's wider, then
- *	HASH_LONG_LOG2 *has to* be defined along
- * HASH_CTX
- *	context structure that at least contains following
- *	members:
- *		typedef struct {
- *			...
- *			HASH_LONG	Nl,Nh;
- *			HASH_LONG	data[HASH_LBLOCK];
- *			unsigned int	num;
- *			...
- *			} HASH_CTX;
- * HASH_UPDATE
- *	name of "Update" function, implemented here.
- * HASH_TRANSFORM
- *	name of "Transform" function, implemented here.
- * HASH_FINAL
- *	name of "Final" function, implemented here.
- * HASH_BLOCK_HOST_ORDER
- *	name of "block" function treating *aligned* input message
- *	in host byte order, implemented externally.
- * HASH_BLOCK_DATA_ORDER
- *	name of "block" function treating *unaligned* input message
- *	in original (data) byte order, implemented externally (it
- *	actually is optional if data and host are of the same
- *	"endianess").
- * HASH_MAKE_STRING
- *	macro convering context variables to an ASCII hash string.
- *
- * Optional macros:
- *
- * B_ENDIAN or L_ENDIAN
- *	defines host byte-order.
- * HASH_LONG_LOG2
- *	defaults to 2 if not states otherwise.
- * HASH_LBLOCK
- *	assumed to be HASH_CBLOCK/4 if not stated otherwise.
- * HASH_BLOCK_DATA_ORDER_ALIGNED
- *	alternative "block" function capable of treating
- *	aligned input message in original (data) order,
- *	implemented externally.
- *
- * MD5 example:
- *
- *	#define DATA_ORDER_IS_LITTLE_ENDIAN
- *
- *	#define HASH_LONG		MD5_LONG
- *	#define HASH_LONG_LOG2		MD5_LONG_LOG2
- *	#define HASH_CTX		MD5_CTX
- *	#define HASH_CBLOCK		MD5_CBLOCK
- *	#define HASH_LBLOCK		MD5_LBLOCK
- *	#define HASH_UPDATE		MD5_Update
- *	#define HASH_TRANSFORM		MD5_Transform
- *	#define HASH_FINAL		MD5_Final
- *	#define HASH_BLOCK_HOST_ORDER	md5_block_host_order
- *	#define HASH_BLOCK_DATA_ORDER	md5_block_data_order
- *
- *					<appro@fy.chalmers.se>
- */
-
-#if !defined(DATA_ORDER_IS_BIG_ENDIAN) && !defined(DATA_ORDER_IS_LITTLE_ENDIAN)
-#error "DATA_ORDER must be defined!"
-#endif
-
-#ifndef HASH_CBLOCK
-#error "HASH_CBLOCK must be defined!"
-#endif
-#ifndef HASH_LONG
-#error "HASH_LONG must be defined!"
-#endif
-#ifndef HASH_CTX
-#error "HASH_CTX must be defined!"
-#endif
-
-#ifndef HASH_UPDATE
-#error "HASH_UPDATE must be defined!"
-#endif
-#ifndef HASH_TRANSFORM
-#error "HASH_TRANSFORM must be defined!"
-#endif
-#ifndef HASH_FINAL
-#error "HASH_FINAL must be defined!"
-#endif
-
-#ifndef HASH_BLOCK_HOST_ORDER
-#error "HASH_BLOCK_HOST_ORDER must be defined!"
-#endif
-
-#if 0
-/*
- * Moved below as it's required only if HASH_BLOCK_DATA_ORDER_ALIGNED
- * isn't defined.
- */
-#ifndef HASH_BLOCK_DATA_ORDER
-#error "HASH_BLOCK_DATA_ORDER must be defined!"
-#endif
-#endif
-
-#ifndef HASH_LBLOCK
-#define HASH_LBLOCK	(HASH_CBLOCK/4)
-#endif
-
-#ifndef HASH_LONG_LOG2
-#define HASH_LONG_LOG2	2
-#endif
-
-/*
- * Engage compiler specific rotate intrinsic function if available.
- */
-#undef ROTATE
-#ifndef PEDANTIC
-# if defined(_MSC_VER) || defined(__ICC)
-#  define ROTATE(a,n)	_lrotl(a,n)
-# elif defined(__MWERKS__)
-#  if defined(__POWERPC__)
-#   define ROTATE(a,n)	__rlwinm(a,n,0,31)
-#  elif defined(__MC68K__)
-    /* Motorola specific tweak. <appro@fy.chalmers.se> */
-#   define ROTATE(a,n)	( n<24 ? __rol(a,n) : __ror(a,32-n) )
-#  else
-#   define ROTATE(a,n)	__rol(a,n)
-#  endif
-# elif defined(__GNUC__) && __GNUC__>=2 && !defined(OPENSSL_NO_ASM) && !defined(OPENSSL_NO_INLINE_ASM)
-  /*
-   * Some GNU C inline assembler templates. Note that these are
-   * rotates by *constant* number of bits! But that's exactly
-   * what we need here...
-   * 					<appro@fy.chalmers.se>
-   */
-#  if defined(__i386) || defined(__i386__) || defined(__x86_64) || defined(__x86_64__)
-#   define ROTATE(a,n)	({ register unsigned int ret;	\
-				asm (			\
-				"roll %1,%0"		\
-				: "=r"(ret)		\
-				: "I"(n), "0"(a)	\
-				: "cc");		\
-			   ret;				\
-			})
-#  elif defined(__powerpc) || defined(__ppc__) || defined(__powerpc64__)
-#   define ROTATE(a,n)	({ register unsigned int ret;	\
-				asm (			\
-				"rlwinm %0,%1,%2,0,31"	\
-				: "=r"(ret)		\
-				: "r"(a), "I"(n));	\
-			   ret;				\
-			})
-#  endif
-# endif
-#endif /* PEDANTIC */
-
-#if HASH_LONG_LOG2==2	/* Engage only if sizeof(HASH_LONG)== 4 */
-/* A nice byte order reversal from Wei Dai <weidai@eskimo.com> */
-#ifdef ROTATE
-/* 5 instructions with rotate instruction, else 9 */
-#define REVERSE_FETCH32(a,l)	(					\
-		l=*(const HASH_LONG *)(a),				\
-		((ROTATE(l,8)&0x00FF00FF)|(ROTATE((l&0x00FF00FF),24)))	\
-				)
-#else
-/* 6 instructions with rotate instruction, else 8 */
-#define REVERSE_FETCH32(a,l)	(				\
-		l=*(const HASH_LONG *)(a),			\
-		l=(((l>>8)&0x00FF00FF)|((l&0x00FF00FF)<<8)),	\
-		ROTATE(l,16)					\
-				)
-/*
- * Originally the middle line started with l=(((l&0xFF00FF00)>>8)|...
- * It's rewritten as above for two reasons:
- *	- RISCs aren't good at long constants and have to explicitely
- *	  compose 'em with several (well, usually 2) instructions in a
- *	  register before performing the actual operation and (as you
- *	  already realized:-) having same constant should inspire the
- *	  compiler to permanently allocate the only register for it;
- *	- most modern CPUs have two ALUs, but usually only one has
- *	  circuitry for shifts:-( this minor tweak inspires compiler
- *	  to schedule shift instructions in a better way...
- *
- *				<appro@fy.chalmers.se>
- */
-#endif
-#endif
-
-#ifndef ROTATE
-#define ROTATE(a,n)     (((a)<<(n))|(((a)&0xffffffff)>>(32-(n))))
-#endif
-
-/*
- * Make some obvious choices. E.g., HASH_BLOCK_DATA_ORDER_ALIGNED
- * and HASH_BLOCK_HOST_ORDER ought to be the same if input data
- * and host are of the same "endianess". It's possible to mask
- * this with blank #define HASH_BLOCK_DATA_ORDER though...
- *
- *				<appro@fy.chalmers.se>
- */
-#if defined(B_ENDIAN)
-#  if defined(DATA_ORDER_IS_BIG_ENDIAN)
-#    if !defined(HASH_BLOCK_DATA_ORDER_ALIGNED) && HASH_LONG_LOG2==2
-#      define HASH_BLOCK_DATA_ORDER_ALIGNED	HASH_BLOCK_HOST_ORDER
-#    endif
-#  endif
-#elif defined(L_ENDIAN)
-#  if defined(DATA_ORDER_IS_LITTLE_ENDIAN)
-#    if !defined(HASH_BLOCK_DATA_ORDER_ALIGNED) && HASH_LONG_LOG2==2
-#      define HASH_BLOCK_DATA_ORDER_ALIGNED	HASH_BLOCK_HOST_ORDER
-#    endif
-#  endif
-#endif
-
-#if !defined(HASH_BLOCK_DATA_ORDER_ALIGNED)
-#ifndef HASH_BLOCK_DATA_ORDER
-#error "HASH_BLOCK_DATA_ORDER must be defined!"
-#endif
-#endif
-
-#if defined(DATA_ORDER_IS_BIG_ENDIAN)
-
-#ifndef PEDANTIC
-# if defined(__GNUC__) && __GNUC__>=2 && !defined(OPENSSL_NO_ASM) && !defined(OPENSSL_NO_INLINE_ASM)
-#  if ((defined(__i386) || defined(__i386__)) && !defined(I386_ONLY)) || \
-      (defined(__x86_64) || defined(__x86_64__))
-    /*
-     * This gives ~30-40% performance improvement in SHA-256 compiled
-     * with gcc [on P4]. Well, first macro to be frank. We can pull
-     * this trick on x86* platforms only, because these CPUs can fetch
-     * unaligned data without raising an exception.
-     */
-#   define HOST_c2l(c,l)	({ unsigned int r=*((const unsigned int *)(c));	\
-				   asm ("bswapl %0":"=r"(r):"0"(r));	\
-				   (c)+=4; (l)=r;			})
-#   define HOST_l2c(l,c)	({ unsigned int r=(l);			\
-				   asm ("bswapl %0":"=r"(r):"0"(r));	\
-				   *((unsigned int *)(c))=r; (c)+=4; r;	})
-#  endif
-# endif
-#endif
-
-#ifndef HOST_c2l
-#define HOST_c2l(c,l)	(l =(((unsigned long)(*((c)++)))<<24),		\
-			 l|=(((unsigned long)(*((c)++)))<<16),		\
-			 l|=(((unsigned long)(*((c)++)))<< 8),		\
-			 l|=(((unsigned long)(*((c)++)))    ),		\
-			 l)
-#endif
-#define HOST_p_c2l(c,l,n)	{					\
-			switch (n) {					\
-			case 0: l =((unsigned long)(*((c)++)))<<24;	\
-			case 1: l|=((unsigned long)(*((c)++)))<<16;	\
-			case 2: l|=((unsigned long)(*((c)++)))<< 8;	\
-			case 3: l|=((unsigned long)(*((c)++)));		\
-				} }
-#define HOST_p_c2l_p(c,l,sc,len) {					\
-			switch (sc) {					\
-			case 0: l =((unsigned long)(*((c)++)))<<24;	\
-				if (--len == 0) break;			\
-			case 1: l|=((unsigned long)(*((c)++)))<<16;	\
-				if (--len == 0) break;			\
-			case 2: l|=((unsigned long)(*((c)++)))<< 8;	\
-				} }
-/* NOTE the pointer is not incremented at the end of this */
-#define HOST_c2l_p(c,l,n)	{					\
-			l=0; (c)+=n;					\
-			switch (n) {					\
-			case 3: l =((unsigned long)(*(--(c))))<< 8;	\
-			case 2: l|=((unsigned long)(*(--(c))))<<16;	\
-			case 1: l|=((unsigned long)(*(--(c))))<<24;	\
-				} }
-#ifndef HOST_l2c
-#define HOST_l2c(l,c)	(*((c)++)=(unsigned char)(((l)>>24)&0xff),	\
-			 *((c)++)=(unsigned char)(((l)>>16)&0xff),	\
-			 *((c)++)=(unsigned char)(((l)>> 8)&0xff),	\
-			 *((c)++)=(unsigned char)(((l)    )&0xff),	\
-			 l)
-#endif
-
-#elif defined(DATA_ORDER_IS_LITTLE_ENDIAN)
-
-#if defined(__i386) || defined(__i386__) || defined(__x86_64) || defined(__x86_64__)
-# ifndef B_ENDIAN
-   /* See comment in DATA_ORDER_IS_BIG_ENDIAN section. */
-#  define HOST_c2l(c,l)	((l)=*((const unsigned int *)(c)), (c)+=4, l)
-#  define HOST_l2c(l,c)	(*((unsigned int *)(c))=(l), (c)+=4, l)
-# endif
-#endif
-
-#ifndef HOST_c2l
-#define HOST_c2l(c,l)	(l =(((unsigned long)(*((c)++)))    ),		\
-			 l|=(((unsigned long)(*((c)++)))<< 8),		\
-			 l|=(((unsigned long)(*((c)++)))<<16),		\
-			 l|=(((unsigned long)(*((c)++)))<<24),		\
-			 l)
-#endif
-#define HOST_p_c2l(c,l,n)	{					\
-			switch (n) {					\
-			case 0: l =((unsigned long)(*((c)++)));		\
-			case 1: l|=((unsigned long)(*((c)++)))<< 8;	\
-			case 2: l|=((unsigned long)(*((c)++)))<<16;	\
-			case 3: l|=((unsigned long)(*((c)++)))<<24;	\
-				} }
-#define HOST_p_c2l_p(c,l,sc,len) {					\
-			switch (sc) {					\
-			case 0: l =((unsigned long)(*((c)++)));		\
-				if (--len == 0) break;			\
-			case 1: l|=((unsigned long)(*((c)++)))<< 8;	\
-				if (--len == 0) break;			\
-			case 2: l|=((unsigned long)(*((c)++)))<<16;	\
-				} }
-/* NOTE the pointer is not incremented at the end of this */
-#define HOST_c2l_p(c,l,n)	{					\
-			l=0; (c)+=n;					\
-			switch (n) {					\
-			case 3: l =((unsigned long)(*(--(c))))<<16;	\
-			case 2: l|=((unsigned long)(*(--(c))))<< 8;	\
-			case 1: l|=((unsigned long)(*(--(c))));		\
-				} }
-#ifndef HOST_l2c
-#define HOST_l2c(l,c)	(*((c)++)=(unsigned char)(((l)    )&0xff),	\
-			 *((c)++)=(unsigned char)(((l)>> 8)&0xff),	\
-			 *((c)++)=(unsigned char)(((l)>>16)&0xff),	\
-			 *((c)++)=(unsigned char)(((l)>>24)&0xff),	\
-			 l)
-#endif
-
-#endif
-
-/*
- * Time for some action:-)
- */
-
-int HASH_UPDATE (HASH_CTX *c, const void *data_, size_t len)
-	{
-	const unsigned char *data=data_;
-	register HASH_LONG * p;
-	register HASH_LONG l;
-	size_t sw,sc,ew,ec;
-
-	if (len==0) return 1;
-
-	l=(c->Nl+(((HASH_LONG)len)<<3))&0xffffffffUL;
-	/* 95-05-24 eay Fixed a bug with the overflow handling, thanks to
-	 * Wei Dai <weidai@eskimo.com> for pointing it out. */
-	if (l < c->Nl) /* overflow */
-		c->Nh++;
-	c->Nh+=(len>>29);	/* might cause compiler warning on 16-bit */
-	c->Nl=l;
-
-	if (c->num != 0)
-		{
-		p=c->data;
-		sw=c->num>>2;
-		sc=c->num&0x03;
-
-		if ((c->num+len) >= HASH_CBLOCK)
-			{
-			l=p[sw]; HOST_p_c2l(data,l,sc); p[sw++]=l;
-			for (; sw<HASH_LBLOCK; sw++)
-				{
-				HOST_c2l(data,l); p[sw]=l;
-				}
-			HASH_BLOCK_HOST_ORDER (c,p,1);
-			len-=(HASH_CBLOCK-c->num);
-			c->num=0;
-			/* drop through and do the rest */
-			}
-		else
-			{
-			c->num+=(unsigned int)len;
-			if ((sc+len) < 4) /* ugly, add char's to a word */
-				{
-				l=p[sw]; HOST_p_c2l_p(data,l,sc,len); p[sw]=l;
-				}
-			else
-				{
-				ew=(c->num>>2);
-				ec=(c->num&0x03);
-				if (sc)
-					l=p[sw];
-				HOST_p_c2l(data,l,sc);
-				p[sw++]=l;
-				for (; sw < ew; sw++)
-					{
-					HOST_c2l(data,l); p[sw]=l;
-					}
-				if (ec)
-					{
-					HOST_c2l_p(data,l,ec); p[sw]=l;
-					}
-				}
-			return 1;
-			}
-		}
-
-	sw=len/HASH_CBLOCK;
-	if (sw > 0)
-		{
-#if defined(HASH_BLOCK_DATA_ORDER_ALIGNED)
-		/*
-		 * Note that HASH_BLOCK_DATA_ORDER_ALIGNED gets defined
-		 * only if sizeof(HASH_LONG)==4.
-		 */
-		if ((((size_t)data)%4) == 0)
-			{
-			/* data is properly aligned so that we can cast it: */
-			HASH_BLOCK_DATA_ORDER_ALIGNED (c,(const HASH_LONG *)data,sw);
-			sw*=HASH_CBLOCK;
-			data+=sw;
-			len-=sw;
-			}
-		else
-#if !defined(HASH_BLOCK_DATA_ORDER)
-			while (sw--)
-				{
-				memcpy (p=c->data,data,HASH_CBLOCK);
-				HASH_BLOCK_DATA_ORDER_ALIGNED(c,p,1);
-				data+=HASH_CBLOCK;
-				len-=HASH_CBLOCK;
-				}
-#endif
-#endif
-#if defined(HASH_BLOCK_DATA_ORDER)
-			{
-			HASH_BLOCK_DATA_ORDER(c,data,sw);
-			sw*=HASH_CBLOCK;
-			data+=sw;
-			len-=sw;
-			}
-#endif
-		}
-
-	if (len!=0)
-		{
-		p = c->data;
-		c->num = len;
-		ew=len>>2;	/* words to copy */
-		ec=len&0x03;
-		for (; ew; ew--,p++)
-			{
-			HOST_c2l(data,l); *p=l;
-			}
-		HOST_c2l_p(data,l,ec);
-		*p=l;
-		}
-	return 1;
-	}
-
-
-void HASH_TRANSFORM (HASH_CTX *c, const unsigned char *data)
-	{
-#if defined(HASH_BLOCK_DATA_ORDER_ALIGNED)
-	if ((((size_t)data)%4) == 0)
-		/* data is properly aligned so that we can cast it: */
-		HASH_BLOCK_DATA_ORDER_ALIGNED (c,(const HASH_LONG *)data,1);
-	else
-#if !defined(HASH_BLOCK_DATA_ORDER)
-		{
-		memcpy (c->data,data,HASH_CBLOCK);
-		HASH_BLOCK_DATA_ORDER_ALIGNED (c,c->data,1);
-		}
-#endif
-#endif
-#if defined(HASH_BLOCK_DATA_ORDER)
-	HASH_BLOCK_DATA_ORDER (c,data,1);
-#endif
-	}
-
-
-int HASH_FINAL (unsigned char *md, HASH_CTX *c)
-	{
-	register HASH_LONG *p;
-	register unsigned long l;
-	register int i,j;
-	static const unsigned char end[4]={0x80,0x00,0x00,0x00};
-	const unsigned char *cp=end;
-
-	/* c->num should definitly have room for at least one more byte. */
-	p=c->data;
-	i=c->num>>2;
-	j=c->num&0x03;
-
-#if 0
-	/* purify often complains about the following line as an
-	 * Uninitialized Memory Read.  While this can be true, the
-	 * following p_c2l macro will reset l when that case is true.
-	 * This is because j&0x03 contains the number of 'valid' bytes
-	 * already in p[i].  If and only if j&0x03 == 0, the UMR will
-	 * occur but this is also the only time p_c2l will do
-	 * l= *(cp++) instead of l|= *(cp++)
-	 * Many thanks to Alex Tang <altitude@cic.net> for pickup this
-	 * 'potential bug' */
-#ifdef PURIFY
-	if (j==0) p[i]=0; /* Yeah, but that's not the way to fix it:-) */
-#endif
-	l=p[i];
-#else
-	l = (j==0) ? 0 : p[i];
-#endif
-	HOST_p_c2l(cp,l,j); p[i++]=l; /* i is the next 'undefined word' */
-
-	if (i>(HASH_LBLOCK-2)) /* save room for Nl and Nh */
-		{
-		if (i<HASH_LBLOCK) p[i]=0;
-		HASH_BLOCK_HOST_ORDER (c,p,1);
-		i=0;
-		}
-	for (; i<(HASH_LBLOCK-2); i++)
-		p[i]=0;
-
-#if   defined(DATA_ORDER_IS_BIG_ENDIAN)
-	p[HASH_LBLOCK-2]=c->Nh;
-	p[HASH_LBLOCK-1]=c->Nl;
-#elif defined(DATA_ORDER_IS_LITTLE_ENDIAN)
-	p[HASH_LBLOCK-2]=c->Nl;
-	p[HASH_LBLOCK-1]=c->Nh;
-#endif
-	HASH_BLOCK_HOST_ORDER (c,p,1);
-
-#ifndef HASH_MAKE_STRING
-#error "HASH_MAKE_STRING must be defined!"
-#else
-	HASH_MAKE_STRING(c,md);
-#endif
-
-	c->num=0;
-	/* clear stuff, HASH_BLOCK may be leaving some stuff on the stack
-	 * but I'm not worried :-)
-	OPENSSL_cleanse((void *)c,sizeof(HASH_CTX));
-	 */
-	return 1;
-	}
-
-#ifndef MD32_REG_T
-#define MD32_REG_T long
-/*
- * This comment was originaly written for MD5, which is why it
- * discusses A-D. But it basically applies to all 32-bit digests,
- * which is why it was moved to common header file.
- *
- * In case you wonder why A-D are declared as long and not
- * as MD5_LONG. Doing so results in slight performance
- * boost on LP64 architectures. The catch is we don't
- * really care if 32 MSBs of a 64-bit register get polluted
- * with eventual overflows as we *save* only 32 LSBs in
- * *either* case. Now declaring 'em long excuses the compiler
- * from keeping 32 MSBs zeroed resulting in 13% performance
- * improvement under SPARC Solaris7/64 and 5% under AlphaLinux.
- * Well, to be honest it should say that this *prevents* 
- * performance degradation.
- *				<appro@fy.chalmers.se>
- * Apparently there're LP64 compilers that generate better
- * code if A-D are declared int. Most notably GCC-x86_64
- * generates better code.
- *				<appro@fy.chalmers.se>
- */
-#endif
diff --git a/crypto/openssl/crypto/md4/Makefile b/crypto/openssl/crypto/md4/Makefile
deleted file mode 100644
index ef97bb0cbef0..000000000000
--- a/crypto/openssl/crypto/md4/Makefile
+++ /dev/null
@@ -1,86 +0,0 @@
-#
-# OpenSSL/crypto/md4/Makefile
-#
-
-DIR=    md4
-TOP=    ../..
-CC=     cc
-CPP=    $(CC) -E
-INCLUDES=
-CFLAG=-g
-MAKEFILE=       Makefile
-AR=             ar r
-
-CFLAGS= $(INCLUDES) $(CFLAG)
-
-GENERAL=Makefile
-TEST=md4test.c
-APPS=md4.c
-
-LIB=$(TOP)/libcrypto.a
-LIBSRC=md4_dgst.c md4_one.c
-LIBOBJ=md4_dgst.o md4_one.o
-
-SRC= $(LIBSRC)
-
-EXHEADER= md4.h
-HEADER= md4_locl.h $(EXHEADER)
-
-ALL=    $(GENERAL) $(SRC) $(HEADER)
-
-top:
-	(cd ../..; $(MAKE) DIRS=crypto SDIRS=$(DIR) sub_all)
-
-all:    lib
-
-lib:    $(LIBOBJ)
-	$(AR) $(LIB) $(LIBOBJ)
-	$(RANLIB) $(LIB) || echo Never mind.
-	@touch lib
-
-files:
-	$(PERL) $(TOP)/util/files.pl Makefile >> $(TOP)/MINFO
-
-links:
-	@$(PERL) $(TOP)/util/mklink.pl ../../include/openssl $(EXHEADER)
-	@$(PERL) $(TOP)/util/mklink.pl ../../test $(TEST)
-	@$(PERL) $(TOP)/util/mklink.pl ../../apps $(APPS)
-
-install:
-	@[ -n "$(INSTALLTOP)" ] # should be set by top Makefile...
-	@headerlist="$(EXHEADER)"; for i in $$headerlist ; \
-	do  \
-	(cp $$i $(INSTALL_PREFIX)$(INSTALLTOP)/include/openssl/$$i; \
-	chmod 644 $(INSTALL_PREFIX)$(INSTALLTOP)/include/openssl/$$i ); \
-	done;
-
-tags:
-	ctags $(SRC)
-
-tests:
-
-lint:
-	lint -DLINT $(INCLUDES) $(SRC)>fluff
-
-depend:
-	@[ -n "$(MAKEDEPEND)" ] # should be set by upper Makefile...
-	$(MAKEDEPEND) -- $(CFLAG) $(INCLUDES) $(DEPFLAG) -- $(PROGS) $(LIBSRC)
-
-dclean:
-	$(PERL) -pe 'if (/^# DO NOT DELETE THIS LINE/) {print; exit(0);}' $(MAKEFILE) >Makefile.new
-	mv -f Makefile.new $(MAKEFILE)
-
-clean:
-	rm -f asm/mx86unix.cpp *.o asm/*.o *.obj lib tags core .pure .nfs* *.old *.bak fluff
-
-# DO NOT DELETE THIS LINE -- make depend depends on it.
-
-md4_dgst.o: ../../include/openssl/e_os2.h ../../include/openssl/md4.h
-md4_dgst.o: ../../include/openssl/opensslconf.h
-md4_dgst.o: ../../include/openssl/opensslv.h ../md32_common.h md4_dgst.c
-md4_dgst.o: md4_locl.h
-md4_one.o: ../../include/openssl/crypto.h ../../include/openssl/e_os2.h
-md4_one.o: ../../include/openssl/md4.h ../../include/openssl/opensslconf.h
-md4_one.o: ../../include/openssl/opensslv.h ../../include/openssl/ossl_typ.h
-md4_one.o: ../../include/openssl/safestack.h ../../include/openssl/stack.h
-md4_one.o: ../../include/openssl/symhacks.h md4_one.c
diff --git a/crypto/openssl/crypto/md4/md4.c b/crypto/openssl/crypto/md4/md4.c
deleted file mode 100644
index 141415ad4df6..000000000000
--- a/crypto/openssl/crypto/md4/md4.c
+++ /dev/null
@@ -1,127 +0,0 @@
-/* crypto/md4/md4.c */
-/* Copyright (C) 1995-1998 Eric Young (eay@cryptsoft.com)
- * All rights reserved.
- *
- * This package is an SSL implementation written
- * by Eric Young (eay@cryptsoft.com).
- * The implementation was written so as to conform with Netscapes SSL.
- * 
- * This library is free for commercial and non-commercial use as long as
- * the following conditions are aheared to.  The following conditions
- * apply to all code found in this distribution, be it the RC4, RSA,
- * lhash, DES, etc., code; not just the SSL code.  The SSL documentation
- * included with this distribution is covered by the same copyright terms
- * except that the holder is Tim Hudson (tjh@cryptsoft.com).
- * 
- * Copyright remains Eric Young's, and as such any Copyright notices in
- * the code are not to be removed.
- * If this package is used in a product, Eric Young should be given attribution
- * as the author of the parts of the library used.
- * This can be in the form of a textual message at program startup or
- * in documentation (online or textual) provided with the package.
- * 
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions
- * are met:
- * 1. Redistributions of source code must retain the copyright
- *    notice, this list of conditions and the following disclaimer.
- * 2. Redistributions in binary form must reproduce the above copyright
- *    notice, this list of conditions and the following disclaimer in the
- *    documentation and/or other materials provided with the distribution.
- * 3. All advertising materials mentioning features or use of this software
- *    must display the following acknowledgement:
- *    "This product includes cryptographic software written by
- *     Eric Young (eay@cryptsoft.com)"
- *    The word 'cryptographic' can be left out if the rouines from the library
- *    being used are not cryptographic related :-).
- * 4. If you include any Windows specific code (or a derivative thereof) from 
- *    the apps directory (application code) you must include an acknowledgement:
- *    "This product includes software written by Tim Hudson (tjh@cryptsoft.com)"
- * 
- * THIS SOFTWARE IS PROVIDED BY ERIC YOUNG ``AS IS'' AND
- * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
- * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
- * ARE DISCLAIMED.  IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE
- * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
- * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
- * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
- * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
- * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
- * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
- * SUCH DAMAGE.
- * 
- * The licence and distribution terms for any publically available version or
- * derivative of this code cannot be changed.  i.e. this code cannot simply be
- * copied and put under another distribution licence
- * [including the GNU Public Licence.]
- */
-
-#include <stdio.h>
-#include <stdlib.h>
-#include <openssl/md4.h>
-
-#define BUFSIZE	1024*16
-
-void do_fp(FILE *f);
-void pt(unsigned char *md);
-#if !defined(_OSD_POSIX) && !defined(__DJGPP__)
-int read(int, void *, unsigned int);
-#endif
-
-int main(int argc, char **argv)
-	{
-	int i,err=0;
-	FILE *IN;
-
-	if (argc == 1)
-		{
-		do_fp(stdin);
-		}
-	else
-		{
-		for (i=1; i<argc; i++)
-			{
-			IN=fopen(argv[i],"r");
-			if (IN == NULL)
-				{
-				perror(argv[i]);
-				err++;
-				continue;
-				}
-			printf("MD4(%s)= ",argv[i]);
-			do_fp(IN);
-			fclose(IN);
-			}
-		}
-	exit(err);
-	}
-
-void do_fp(FILE *f)
-	{
-	MD4_CTX c;
-	unsigned char md[MD4_DIGEST_LENGTH];
-	int fd;
-	int i;
-	static unsigned char buf[BUFSIZE];
-
-	fd=fileno(f);
-	MD4_Init(&c);
-	for (;;)
-		{
-		i=read(fd,buf,sizeof buf);
-		if (i <= 0) break;
-		MD4_Update(&c,buf,(unsigned long)i);
-		}
-	MD4_Final(&(md[0]),&c);
-	pt(md);
-	}
-
-void pt(unsigned char *md)
-	{
-	int i;
-
-	for (i=0; i<MD4_DIGEST_LENGTH; i++)
-		printf("%02x",md[i]);
-	printf("\n");
-	}
-
diff --git a/crypto/openssl/crypto/md4/md4.h b/crypto/openssl/crypto/md4/md4.h
deleted file mode 100644
index 5598c93a4fea..000000000000
--- a/crypto/openssl/crypto/md4/md4.h
+++ /dev/null
@@ -1,117 +0,0 @@
-/* crypto/md4/md4.h */
-/* Copyright (C) 1995-1998 Eric Young (eay@cryptsoft.com)
- * All rights reserved.
- *
- * This package is an SSL implementation written
- * by Eric Young (eay@cryptsoft.com).
- * The implementation was written so as to conform with Netscapes SSL.
- * 
- * This library is free for commercial and non-commercial use as long as
- * the following conditions are aheared to.  The following conditions
- * apply to all code found in this distribution, be it the RC4, RSA,
- * lhash, DES, etc., code; not just the SSL code.  The SSL documentation
- * included with this distribution is covered by the same copyright terms
- * except that the holder is Tim Hudson (tjh@cryptsoft.com).
- * 
- * Copyright remains Eric Young's, and as such any Copyright notices in
- * the code are not to be removed.
- * If this package is used in a product, Eric Young should be given attribution
- * as the author of the parts of the library used.
- * This can be in the form of a textual message at program startup or
- * in documentation (online or textual) provided with the package.
- * 
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions
- * are met:
- * 1. Redistributions of source code must retain the copyright
- *    notice, this list of conditions and the following disclaimer.
- * 2. Redistributions in binary form must reproduce the above copyright
- *    notice, this list of conditions and the following disclaimer in the
- *    documentation and/or other materials provided with the distribution.
- * 3. All advertising materials mentioning features or use of this software
- *    must display the following acknowledgement:
- *    "This product includes cryptographic software written by
- *     Eric Young (eay@cryptsoft.com)"
- *    The word 'cryptographic' can be left out if the rouines from the library
- *    being used are not cryptographic related :-).
- * 4. If you include any Windows specific code (or a derivative thereof) from 
- *    the apps directory (application code) you must include an acknowledgement:
- *    "This product includes software written by Tim Hudson (tjh@cryptsoft.com)"
- * 
- * THIS SOFTWARE IS PROVIDED BY ERIC YOUNG ``AS IS'' AND
- * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
- * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
- * ARE DISCLAIMED.  IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE
- * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
- * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
- * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
- * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
- * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
- * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
- * SUCH DAMAGE.
- * 
- * The licence and distribution terms for any publically available version or
- * derivative of this code cannot be changed.  i.e. this code cannot simply be
- * copied and put under another distribution licence
- * [including the GNU Public Licence.]
- */
-
-#ifndef HEADER_MD4_H
-#define HEADER_MD4_H
-
-#include <openssl/e_os2.h>
-#include <stddef.h>
-
-#ifdef  __cplusplus
-extern "C" {
-#endif
-
-#ifdef OPENSSL_NO_MD4
-#error MD4 is disabled.
-#endif
-
-/*
- * !!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
- * ! MD4_LONG has to be at least 32 bits wide. If it's wider, then !
- * ! MD4_LONG_LOG2 has to be defined along.			   !
- * !!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
- */
-
-#if defined(OPENSSL_SYS_WIN16) || defined(__LP32__)
-#define MD4_LONG unsigned long
-#elif defined(OPENSSL_SYS_CRAY) || defined(__ILP64__)
-#define MD4_LONG unsigned long
-#define MD4_LONG_LOG2 3
-/*
- * _CRAY note. I could declare short, but I have no idea what impact
- * does it have on performance on none-T3E machines. I could declare
- * int, but at least on C90 sizeof(int) can be chosen at compile time.
- * So I've chosen long...
- *					<appro@fy.chalmers.se>
- */
-#else
-#define MD4_LONG unsigned int
-#endif
-
-#define MD4_CBLOCK	64
-#define MD4_LBLOCK	(MD4_CBLOCK/4)
-#define MD4_DIGEST_LENGTH 16
-
-typedef struct MD4state_st
-	{
-	MD4_LONG A,B,C,D;
-	MD4_LONG Nl,Nh;
-	MD4_LONG data[MD4_LBLOCK];
-	unsigned int num;
-	} MD4_CTX;
-
-int MD4_Init(MD4_CTX *c);
-int MD4_Update(MD4_CTX *c, const void *data, size_t len);
-int MD4_Final(unsigned char *md, MD4_CTX *c);
-unsigned char *MD4(const unsigned char *d, size_t n, unsigned char *md);
-void MD4_Transform(MD4_CTX *c, const unsigned char *b);
-#ifdef  __cplusplus
-}
-#endif
-
-#endif
diff --git a/crypto/openssl/crypto/md4/md4_dgst.c b/crypto/openssl/crypto/md4/md4_dgst.c
deleted file mode 100644
index 86b79b8e4d45..000000000000
--- a/crypto/openssl/crypto/md4/md4_dgst.c
+++ /dev/null
@@ -1,258 +0,0 @@
-/* crypto/md4/md4_dgst.c */
-/* Copyright (C) 1995-1998 Eric Young (eay@cryptsoft.com)
- * All rights reserved.
- *
- * This package is an SSL implementation written
- * by Eric Young (eay@cryptsoft.com).
- * The implementation was written so as to conform with Netscapes SSL.
- * 
- * This library is free for commercial and non-commercial use as long as
- * the following conditions are aheared to.  The following conditions
- * apply to all code found in this distribution, be it the RC4, RSA,
- * lhash, DES, etc., code; not just the SSL code.  The SSL documentation
- * included with this distribution is covered by the same copyright terms
- * except that the holder is Tim Hudson (tjh@cryptsoft.com).
- * 
- * Copyright remains Eric Young's, and as such any Copyright notices in
- * the code are not to be removed.
- * If this package is used in a product, Eric Young should be given attribution
- * as the author of the parts of the library used.
- * This can be in the form of a textual message at program startup or
- * in documentation (online or textual) provided with the package.
- * 
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions
- * are met:
- * 1. Redistributions of source code must retain the copyright
- *    notice, this list of conditions and the following disclaimer.
- * 2. Redistributions in binary form must reproduce the above copyright
- *    notice, this list of conditions and the following disclaimer in the
- *    documentation and/or other materials provided with the distribution.
- * 3. All advertising materials mentioning features or use of this software
- *    must display the following acknowledgement:
- *    "This product includes cryptographic software written by
- *     Eric Young (eay@cryptsoft.com)"
- *    The word 'cryptographic' can be left out if the rouines from the library
- *    being used are not cryptographic related :-).
- * 4. If you include any Windows specific code (or a derivative thereof) from 
- *    the apps directory (application code) you must include an acknowledgement:
- *    "This product includes software written by Tim Hudson (tjh@cryptsoft.com)"
- * 
- * THIS SOFTWARE IS PROVIDED BY ERIC YOUNG ``AS IS'' AND
- * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
- * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
- * ARE DISCLAIMED.  IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE
- * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
- * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
- * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
- * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
- * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
- * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
- * SUCH DAMAGE.
- * 
- * The licence and distribution terms for any publically available version or
- * derivative of this code cannot be changed.  i.e. this code cannot simply be
- * copied and put under another distribution licence
- * [including the GNU Public Licence.]
- */
-
-#include <stdio.h>
-#include "md4_locl.h"
-#include <openssl/opensslv.h>
-
-const char MD4_version[]="MD4" OPENSSL_VERSION_PTEXT;
-
-/* Implemented from RFC1186 The MD4 Message-Digest Algorithm
- */
-
-#define INIT_DATA_A (unsigned long)0x67452301L
-#define INIT_DATA_B (unsigned long)0xefcdab89L
-#define INIT_DATA_C (unsigned long)0x98badcfeL
-#define INIT_DATA_D (unsigned long)0x10325476L
-
-int MD4_Init(MD4_CTX *c)
-	{
-	c->A=INIT_DATA_A;
-	c->B=INIT_DATA_B;
-	c->C=INIT_DATA_C;
-	c->D=INIT_DATA_D;
-	c->Nl=0;
-	c->Nh=0;
-	c->num=0;
-	return 1;
-	}
-
-#ifndef md4_block_host_order
-void md4_block_host_order (MD4_CTX *c, const void *data, size_t num)
-	{
-	const MD4_LONG *X=data;
-	register unsigned MD32_REG_T A,B,C,D;
-
-	A=c->A;
-	B=c->B;
-	C=c->C;
-	D=c->D;
-
-	for (;num--;X+=HASH_LBLOCK)
-		{
-	/* Round 0 */
-	R0(A,B,C,D,X[ 0], 3,0);
-	R0(D,A,B,C,X[ 1], 7,0);
-	R0(C,D,A,B,X[ 2],11,0);
-	R0(B,C,D,A,X[ 3],19,0);
-	R0(A,B,C,D,X[ 4], 3,0);
-	R0(D,A,B,C,X[ 5], 7,0);
-	R0(C,D,A,B,X[ 6],11,0);
-	R0(B,C,D,A,X[ 7],19,0);
-	R0(A,B,C,D,X[ 8], 3,0);
-	R0(D,A,B,C,X[ 9], 7,0);
-	R0(C,D,A,B,X[10],11,0);
-	R0(B,C,D,A,X[11],19,0);
-	R0(A,B,C,D,X[12], 3,0);
-	R0(D,A,B,C,X[13], 7,0);
-	R0(C,D,A,B,X[14],11,0);
-	R0(B,C,D,A,X[15],19,0);
-	/* Round 1 */
-	R1(A,B,C,D,X[ 0], 3,0x5A827999L);
-	R1(D,A,B,C,X[ 4], 5,0x5A827999L);
-	R1(C,D,A,B,X[ 8], 9,0x5A827999L);
-	R1(B,C,D,A,X[12],13,0x5A827999L);
-	R1(A,B,C,D,X[ 1], 3,0x5A827999L);
-	R1(D,A,B,C,X[ 5], 5,0x5A827999L);
-	R1(C,D,A,B,X[ 9], 9,0x5A827999L);
-	R1(B,C,D,A,X[13],13,0x5A827999L);
-	R1(A,B,C,D,X[ 2], 3,0x5A827999L);
-	R1(D,A,B,C,X[ 6], 5,0x5A827999L);
-	R1(C,D,A,B,X[10], 9,0x5A827999L);
-	R1(B,C,D,A,X[14],13,0x5A827999L);
-	R1(A,B,C,D,X[ 3], 3,0x5A827999L);
-	R1(D,A,B,C,X[ 7], 5,0x5A827999L);
-	R1(C,D,A,B,X[11], 9,0x5A827999L);
-	R1(B,C,D,A,X[15],13,0x5A827999L);
-	/* Round 2 */
-	R2(A,B,C,D,X[ 0], 3,0x6ED9EBA1);
-	R2(D,A,B,C,X[ 8], 9,0x6ED9EBA1);
-	R2(C,D,A,B,X[ 4],11,0x6ED9EBA1);
-	R2(B,C,D,A,X[12],15,0x6ED9EBA1);
-	R2(A,B,C,D,X[ 2], 3,0x6ED9EBA1);
-	R2(D,A,B,C,X[10], 9,0x6ED9EBA1);
-	R2(C,D,A,B,X[ 6],11,0x6ED9EBA1);
-	R2(B,C,D,A,X[14],15,0x6ED9EBA1);
-	R2(A,B,C,D,X[ 1], 3,0x6ED9EBA1);
-	R2(D,A,B,C,X[ 9], 9,0x6ED9EBA1);
-	R2(C,D,A,B,X[ 5],11,0x6ED9EBA1);
-	R2(B,C,D,A,X[13],15,0x6ED9EBA1);
-	R2(A,B,C,D,X[ 3], 3,0x6ED9EBA1);
-	R2(D,A,B,C,X[11], 9,0x6ED9EBA1);
-	R2(C,D,A,B,X[ 7],11,0x6ED9EBA1);
-	R2(B,C,D,A,X[15],15,0x6ED9EBA1);
-
-	A = c->A += A;
-	B = c->B += B;
-	C = c->C += C;
-	D = c->D += D;
-		}
-	}
-#endif
-
-#ifndef md4_block_data_order
-#ifdef X
-#undef X
-#endif
-void md4_block_data_order (MD4_CTX *c, const void *data_, size_t num)
-	{
-	const unsigned char *data=data_;
-	register unsigned MD32_REG_T A,B,C,D,l;
-#ifndef MD32_XARRAY
-	/* See comment in crypto/sha/sha_locl.h for details. */
-	unsigned MD32_REG_T	XX0, XX1, XX2, XX3, XX4, XX5, XX6, XX7,
-				XX8, XX9,XX10,XX11,XX12,XX13,XX14,XX15;
-# define X(i)	XX##i
-#else
-	MD4_LONG XX[MD4_LBLOCK];
-# define X(i)	XX[i]
-#endif
-
-	A=c->A;
-	B=c->B;
-	C=c->C;
-	D=c->D;
-
-	for (;num--;)
-		{
-	HOST_c2l(data,l); X( 0)=l;		HOST_c2l(data,l); X( 1)=l;
-	/* Round 0 */
-	R0(A,B,C,D,X( 0), 3,0);	HOST_c2l(data,l); X( 2)=l;
-	R0(D,A,B,C,X( 1), 7,0);	HOST_c2l(data,l); X( 3)=l;
-	R0(C,D,A,B,X( 2),11,0);	HOST_c2l(data,l); X( 4)=l;
-	R0(B,C,D,A,X( 3),19,0);	HOST_c2l(data,l); X( 5)=l;
-	R0(A,B,C,D,X( 4), 3,0);	HOST_c2l(data,l); X( 6)=l;
-	R0(D,A,B,C,X( 5), 7,0);	HOST_c2l(data,l); X( 7)=l;
-	R0(C,D,A,B,X( 6),11,0);	HOST_c2l(data,l); X( 8)=l;
-	R0(B,C,D,A,X( 7),19,0);	HOST_c2l(data,l); X( 9)=l;
-	R0(A,B,C,D,X( 8), 3,0);	HOST_c2l(data,l); X(10)=l;
-	R0(D,A,B,C,X( 9), 7,0);	HOST_c2l(data,l); X(11)=l;
-	R0(C,D,A,B,X(10),11,0);	HOST_c2l(data,l); X(12)=l;
-	R0(B,C,D,A,X(11),19,0);	HOST_c2l(data,l); X(13)=l;
-	R0(A,B,C,D,X(12), 3,0);	HOST_c2l(data,l); X(14)=l;
-	R0(D,A,B,C,X(13), 7,0);	HOST_c2l(data,l); X(15)=l;
-	R0(C,D,A,B,X(14),11,0);
-	R0(B,C,D,A,X(15),19,0);
-	/* Round 1 */
-	R1(A,B,C,D,X( 0), 3,0x5A827999L);
-	R1(D,A,B,C,X( 4), 5,0x5A827999L);
-	R1(C,D,A,B,X( 8), 9,0x5A827999L);
-	R1(B,C,D,A,X(12),13,0x5A827999L);
-	R1(A,B,C,D,X( 1), 3,0x5A827999L);
-	R1(D,A,B,C,X( 5), 5,0x5A827999L);
-	R1(C,D,A,B,X( 9), 9,0x5A827999L);
-	R1(B,C,D,A,X(13),13,0x5A827999L);
-	R1(A,B,C,D,X( 2), 3,0x5A827999L);
-	R1(D,A,B,C,X( 6), 5,0x5A827999L);
-	R1(C,D,A,B,X(10), 9,0x5A827999L);
-	R1(B,C,D,A,X(14),13,0x5A827999L);
-	R1(A,B,C,D,X( 3), 3,0x5A827999L);
-	R1(D,A,B,C,X( 7), 5,0x5A827999L);
-	R1(C,D,A,B,X(11), 9,0x5A827999L);
-	R1(B,C,D,A,X(15),13,0x5A827999L);
-	/* Round 2 */
-	R2(A,B,C,D,X( 0), 3,0x6ED9EBA1L);
-	R2(D,A,B,C,X( 8), 9,0x6ED9EBA1L);
-	R2(C,D,A,B,X( 4),11,0x6ED9EBA1L);
-	R2(B,C,D,A,X(12),15,0x6ED9EBA1L);
-	R2(A,B,C,D,X( 2), 3,0x6ED9EBA1L);
-	R2(D,A,B,C,X(10), 9,0x6ED9EBA1L);
-	R2(C,D,A,B,X( 6),11,0x6ED9EBA1L);
-	R2(B,C,D,A,X(14),15,0x6ED9EBA1L);
-	R2(A,B,C,D,X( 1), 3,0x6ED9EBA1L);
-	R2(D,A,B,C,X( 9), 9,0x6ED9EBA1L);
-	R2(C,D,A,B,X( 5),11,0x6ED9EBA1L);
-	R2(B,C,D,A,X(13),15,0x6ED9EBA1L);
-	R2(A,B,C,D,X( 3), 3,0x6ED9EBA1L);
-	R2(D,A,B,C,X(11), 9,0x6ED9EBA1L);
-	R2(C,D,A,B,X( 7),11,0x6ED9EBA1L);
-	R2(B,C,D,A,X(15),15,0x6ED9EBA1L);
-
-	A = c->A += A;
-	B = c->B += B;
-	C = c->C += C;
-	D = c->D += D;
-		}
-	}
-#endif
-
-#ifdef undef
-int printit(unsigned long *l)
-	{
-	int i,ii;
-
-	for (i=0; i<2; i++)
-		{
-		for (ii=0; ii<8; ii++)
-			{
-			fprintf(stderr,"%08lx ",l[i*8+ii]);
-			}
-		fprintf(stderr,"\n");
-		}
-	}
-#endif
diff --git a/crypto/openssl/crypto/md4/md4_locl.h b/crypto/openssl/crypto/md4/md4_locl.h
deleted file mode 100644
index abc7b9bb84bd..000000000000
--- a/crypto/openssl/crypto/md4/md4_locl.h
+++ /dev/null
@@ -1,156 +0,0 @@
-/* crypto/md4/md4_locl.h */
-/* Copyright (C) 1995-1998 Eric Young (eay@cryptsoft.com)
- * All rights reserved.
- *
- * This package is an SSL implementation written
- * by Eric Young (eay@cryptsoft.com).
- * The implementation was written so as to conform with Netscapes SSL.
- * 
- * This library is free for commercial and non-commercial use as long as
- * the following conditions are aheared to.  The following conditions
- * apply to all code found in this distribution, be it the RC4, RSA,
- * lhash, DES, etc., code; not just the SSL code.  The SSL documentation
- * included with this distribution is covered by the same copyright terms
- * except that the holder is Tim Hudson (tjh@cryptsoft.com).
- * 
- * Copyright remains Eric Young's, and as such any Copyright notices in
- * the code are not to be removed.
- * If this package is used in a product, Eric Young should be given attribution
- * as the author of the parts of the library used.
- * This can be in the form of a textual message at program startup or
- * in documentation (online or textual) provided with the package.
- * 
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions
- * are met:
- * 1. Redistributions of source code must retain the copyright
- *    notice, this list of conditions and the following disclaimer.
- * 2. Redistributions in binary form must reproduce the above copyright
- *    notice, this list of conditions and the following disclaimer in the
- *    documentation and/or other materials provided with the distribution.
- * 3. All advertising materials mentioning features or use of this software
- *    must display the following acknowledgement:
- *    "This product includes cryptographic software written by
- *     Eric Young (eay@cryptsoft.com)"
- *    The word 'cryptographic' can be left out if the rouines from the library
- *    being used are not cryptographic related :-).
- * 4. If you include any Windows specific code (or a derivative thereof) from 
- *    the apps directory (application code) you must include an acknowledgement:
- *    "This product includes software written by Tim Hudson (tjh@cryptsoft.com)"
- * 
- * THIS SOFTWARE IS PROVIDED BY ERIC YOUNG ``AS IS'' AND
- * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
- * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
- * ARE DISCLAIMED.  IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE
- * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
- * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
- * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
- * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
- * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
- * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
- * SUCH DAMAGE.
- * 
- * The licence and distribution terms for any publically available version or
- * derivative of this code cannot be changed.  i.e. this code cannot simply be
- * copied and put under another distribution licence
- * [including the GNU Public Licence.]
- */
-
-#include <stdlib.h>
-#include <string.h>
-#include <openssl/opensslconf.h>
-#include <openssl/md4.h>
-
-#ifndef MD4_LONG_LOG2
-#define MD4_LONG_LOG2 2 /* default to 32 bits */
-#endif
-
-void md4_block_host_order (MD4_CTX *c, const void *p,size_t num);
-void md4_block_data_order (MD4_CTX *c, const void *p,size_t num);
-
-#if defined(__i386) || defined(__i386__) || defined(_M_IX86) || defined(__INTEL__)
-# if !defined(B_ENDIAN)
-/*
- * *_block_host_order is expected to handle aligned data while
- * *_block_data_order - unaligned. As algorithm and host (x86)
- * are in this case of the same "endianness" these two are
- * otherwise indistinguishable. But normally you don't want to
- * call the same function because unaligned access in places
- * where alignment is expected is usually a "Bad Thing". Indeed,
- * on RISCs you get punished with BUS ERROR signal or *severe*
- * performance degradation. Intel CPUs are in turn perfectly
- * capable of loading unaligned data without such drastic side
- * effect. Yes, they say it's slower than aligned load, but no
- * exception is generated and therefore performance degradation
- * is *incomparable* with RISCs. What we should weight here is
- * costs of unaligned access against costs of aligning data.
- * According to my measurements allowing unaligned access results
- * in ~9% performance improvement on Pentium II operating at
- * 266MHz. I won't be surprised if the difference will be higher
- * on faster systems:-)
- *
- *				<appro@fy.chalmers.se>
- */
-# define md4_block_data_order md4_block_host_order
-# endif
-#endif
-
-#define DATA_ORDER_IS_LITTLE_ENDIAN
-
-#define HASH_LONG		MD4_LONG
-#define HASH_LONG_LOG2		MD4_LONG_LOG2
-#define HASH_CTX		MD4_CTX
-#define HASH_CBLOCK		MD4_CBLOCK
-#define HASH_LBLOCK		MD4_LBLOCK
-#define HASH_UPDATE		MD4_Update
-#define HASH_TRANSFORM		MD4_Transform
-#define HASH_FINAL		MD4_Final
-#define	HASH_MAKE_STRING(c,s)	do {	\
-	unsigned long ll;		\
-	ll=(c)->A; HOST_l2c(ll,(s));	\
-	ll=(c)->B; HOST_l2c(ll,(s));	\
-	ll=(c)->C; HOST_l2c(ll,(s));	\
-	ll=(c)->D; HOST_l2c(ll,(s));	\
-	} while (0)
-#define HASH_BLOCK_HOST_ORDER	md4_block_host_order
-#if !defined(L_ENDIAN) || defined(md4_block_data_order)
-#define	HASH_BLOCK_DATA_ORDER	md4_block_data_order
-/*
- * Little-endians (Intel and Alpha) feel better without this.
- * It looks like memcpy does better job than generic
- * md4_block_data_order on copying-n-aligning input data.
- * But frankly speaking I didn't expect such result on Alpha.
- * On the other hand I've got this with egcs-1.0.2 and if
- * program is compiled with another (better?) compiler it
- * might turn out other way around.
- *
- *				<appro@fy.chalmers.se>
- */
-#endif
-
-#include "md32_common.h"
-
-/*
-#define	F(x,y,z)	(((x) & (y))  |  ((~(x)) & (z)))
-#define	G(x,y,z)	(((x) & (y))  |  ((x) & ((z))) | ((y) & ((z))))
-*/
-
-/* As pointed out by Wei Dai <weidai@eskimo.com>, the above can be
- * simplified to the code below.  Wei attributes these optimizations
- * to Peter Gutmann's SHS code, and he attributes it to Rich Schroeppel.
- */
-#define	F(b,c,d)	((((c) ^ (d)) & (b)) ^ (d))
-#define G(b,c,d)	(((b) & (c)) | ((b) & (d)) | ((c) & (d)))
-#define	H(b,c,d)	((b) ^ (c) ^ (d))
-
-#define R0(a,b,c,d,k,s,t) { \
-	a+=((k)+(t)+F((b),(c),(d))); \
-	a=ROTATE(a,s); };
-
-#define R1(a,b,c,d,k,s,t) { \
-	a+=((k)+(t)+G((b),(c),(d))); \
-	a=ROTATE(a,s); };\
-
-#define R2(a,b,c,d,k,s,t) { \
-	a+=((k)+(t)+H((b),(c),(d))); \
-	a=ROTATE(a,s); };
diff --git a/crypto/openssl/crypto/md4/md4_one.c b/crypto/openssl/crypto/md4/md4_one.c
deleted file mode 100644
index bb6436263818..000000000000
--- a/crypto/openssl/crypto/md4/md4_one.c
+++ /dev/null
@@ -1,97 +0,0 @@
-/* crypto/md4/md4_one.c */
-/* Copyright (C) 1995-1998 Eric Young (eay@cryptsoft.com)
- * All rights reserved.
- *
- * This package is an SSL implementation written
- * by Eric Young (eay@cryptsoft.com).
- * The implementation was written so as to conform with Netscapes SSL.
- * 
- * This library is free for commercial and non-commercial use as long as
- * the following conditions are aheared to.  The following conditions
- * apply to all code found in this distribution, be it the RC4, RSA,
- * lhash, DES, etc., code; not just the SSL code.  The SSL documentation
- * included with this distribution is covered by the same copyright terms
- * except that the holder is Tim Hudson (tjh@cryptsoft.com).
- * 
- * Copyright remains Eric Young's, and as such any Copyright notices in
- * the code are not to be removed.
- * If this package is used in a product, Eric Young should be given attribution
- * as the author of the parts of the library used.
- * This can be in the form of a textual message at program startup or
- * in documentation (online or textual) provided with the package.
- * 
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions
- * are met:
- * 1. Redistributions of source code must retain the copyright
- *    notice, this list of conditions and the following disclaimer.
- * 2. Redistributions in binary form must reproduce the above copyright
- *    notice, this list of conditions and the following disclaimer in the
- *    documentation and/or other materials provided with the distribution.
- * 3. All advertising materials mentioning features or use of this software
- *    must display the following acknowledgement:
- *    "This product includes cryptographic software written by
- *     Eric Young (eay@cryptsoft.com)"
- *    The word 'cryptographic' can be left out if the rouines from the library
- *    being used are not cryptographic related :-).
- * 4. If you include any Windows specific code (or a derivative thereof) from 
- *    the apps directory (application code) you must include an acknowledgement:
- *    "This product includes software written by Tim Hudson (tjh@cryptsoft.com)"
- * 
- * THIS SOFTWARE IS PROVIDED BY ERIC YOUNG ``AS IS'' AND
- * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
- * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
- * ARE DISCLAIMED.  IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE
- * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
- * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
- * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
- * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
- * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
- * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
- * SUCH DAMAGE.
- * 
- * The licence and distribution terms for any publically available version or
- * derivative of this code cannot be changed.  i.e. this code cannot simply be
- * copied and put under another distribution licence
- * [including the GNU Public Licence.]
- */
-
-#include <stdio.h>
-#include <string.h>
-#include <openssl/md4.h>
-#include <openssl/crypto.h>
-
-#ifdef CHARSET_EBCDIC
-#include <openssl/ebcdic.h>
-#endif
-
-unsigned char *MD4(const unsigned char *d, size_t n, unsigned char *md)
-	{
-	MD4_CTX c;
-	static unsigned char m[MD4_DIGEST_LENGTH];
-
-	if (md == NULL) md=m;
-	if (!MD4_Init(&c))
-		return NULL;
-#ifndef CHARSET_EBCDIC
-	MD4_Update(&c,d,n);
-#else
-	{
-		char temp[1024];
-		unsigned long chunk;
-
-		while (n > 0)
-		{
-			chunk = (n > sizeof(temp)) ? sizeof(temp) : n;
-			ebcdic2ascii(temp, d, chunk);
-			MD4_Update(&c,temp,chunk);
-			n -= chunk;
-			d += chunk;
-		}
-	}
-#endif
-	MD4_Final(md,&c);
-	OPENSSL_cleanse(&c,sizeof(c)); /* security consideration */
-	return(md);
-	}
-
diff --git a/crypto/openssl/crypto/md4/md4s.cpp b/crypto/openssl/crypto/md4/md4s.cpp
deleted file mode 100644
index c0ec97fc9f9b..000000000000
--- a/crypto/openssl/crypto/md4/md4s.cpp
+++ /dev/null
@@ -1,78 +0,0 @@
-//
-// gettsc.inl
-//
-// gives access to the Pentium's (secret) cycle counter
-//
-// This software was written by Leonard Janke (janke@unixg.ubc.ca)
-// in 1996-7 and is entered, by him, into the public domain.
-
-#if defined(__WATCOMC__)
-void GetTSC(unsigned long&);
-#pragma aux GetTSC = 0x0f 0x31 "mov [edi], eax" parm [edi] modify [edx eax];
-#elif defined(__GNUC__)
-inline
-void GetTSC(unsigned long& tsc)
-{
-  asm volatile(".byte 15, 49\n\t"
-	       : "=eax" (tsc)
-	       :
-	       : "%edx", "%eax");
-}
-#elif defined(_MSC_VER)
-inline
-void GetTSC(unsigned long& tsc)
-{
-  unsigned long a;
-  __asm _emit 0fh
-  __asm _emit 31h
-  __asm mov a, eax;
-  tsc=a;
-}
-#endif      
-
-#include <stdio.h>
-#include <stdlib.h>
-#include <openssl/md4.h>
-
-extern "C" {
-void md4_block_x86(MD4_CTX *ctx, unsigned char *buffer,int num);
-}
-
-void main(int argc,char *argv[])
-	{
-	unsigned char buffer[64*256];
-	MD4_CTX ctx;
-	unsigned long s1,s2,e1,e2;
-	unsigned char k[16];
-	unsigned long data[2];
-	unsigned char iv[8];
-	int i,num=0,numm;
-	int j=0;
-
-	if (argc >= 2)
-		num=atoi(argv[1]);
-
-	if (num == 0) num=16;
-	if (num > 250) num=16;
-	numm=num+2;
-	num*=64;
-	numm*=64;
-
-	for (j=0; j<6; j++)
-		{
-		for (i=0; i<10; i++) /**/
-			{
-			md4_block_x86(&ctx,buffer,numm);
-			GetTSC(s1);
-			md4_block_x86(&ctx,buffer,numm);
-			GetTSC(e1);
-			GetTSC(s2);
-			md4_block_x86(&ctx,buffer,num);
-			GetTSC(e2);
-			md4_block_x86(&ctx,buffer,num);
-			}
-		printf("md4 (%d bytes) %d %d (%.2f)\n",num,
-			e1-s1,e2-s2,(double)((e1-s1)-(e2-s2))/2);
-		}
-	}
-
diff --git a/crypto/openssl/crypto/md4/md4test.c b/crypto/openssl/crypto/md4/md4test.c
deleted file mode 100644
index 5da53382c9f8..000000000000
--- a/crypto/openssl/crypto/md4/md4test.c
+++ /dev/null
@@ -1,136 +0,0 @@
-/* crypto/md4/md4test.c */
-/* Copyright (C) 1995-1998 Eric Young (eay@cryptsoft.com)
- * All rights reserved.
- *
- * This package is an SSL implementation written
- * by Eric Young (eay@cryptsoft.com).
- * The implementation was written so as to conform with Netscapes SSL.
- * 
- * This library is free for commercial and non-commercial use as long as
- * the following conditions are aheared to.  The following conditions
- * apply to all code found in this distribution, be it the RC4, RSA,
- * lhash, DES, etc., code; not just the SSL code.  The SSL documentation
- * included with this distribution is covered by the same copyright terms
- * except that the holder is Tim Hudson (tjh@cryptsoft.com).
- * 
- * Copyright remains Eric Young's, and as such any Copyright notices in
- * the code are not to be removed.
- * If this package is used in a product, Eric Young should be given attribution
- * as the author of the parts of the library used.
- * This can be in the form of a textual message at program startup or
- * in documentation (online or textual) provided with the package.
- * 
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions
- * are met:
- * 1. Redistributions of source code must retain the copyright
- *    notice, this list of conditions and the following disclaimer.
- * 2. Redistributions in binary form must reproduce the above copyright
- *    notice, this list of conditions and the following disclaimer in the
- *    documentation and/or other materials provided with the distribution.
- * 3. All advertising materials mentioning features or use of this software
- *    must display the following acknowledgement:
- *    "This product includes cryptographic software written by
- *     Eric Young (eay@cryptsoft.com)"
- *    The word 'cryptographic' can be left out if the rouines from the library
- *    being used are not cryptographic related :-).
- * 4. If you include any Windows specific code (or a derivative thereof) from 
- *    the apps directory (application code) you must include an acknowledgement:
- *    "This product includes software written by Tim Hudson (tjh@cryptsoft.com)"
- * 
- * THIS SOFTWARE IS PROVIDED BY ERIC YOUNG ``AS IS'' AND
- * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
- * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
- * ARE DISCLAIMED.  IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE
- * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
- * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
- * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
- * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
- * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
- * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
- * SUCH DAMAGE.
- * 
- * The licence and distribution terms for any publically available version or
- * derivative of this code cannot be changed.  i.e. this code cannot simply be
- * copied and put under another distribution licence
- * [including the GNU Public Licence.]
- */
-
-#include <stdio.h>
-#include <string.h>
-#include <stdlib.h>
-
-#include "../e_os.h"
-
-#ifdef OPENSSL_NO_MD4
-int main(int argc, char *argv[])
-{
-    printf("No MD4 support\n");
-    return(0);
-}
-#else
-#include <openssl/evp.h>
-#include <openssl/md4.h>
-
-static char *test[]={
-	"",
-	"a",
-	"abc",
-	"message digest",
-	"abcdefghijklmnopqrstuvwxyz",
-	"ABCDEFGHIJKLMNOPQRSTUVWXYZabcdefghijklmnopqrstuvwxyz0123456789",
-	"12345678901234567890123456789012345678901234567890123456789012345678901234567890",
-	NULL,
-	};
-
-static char *ret[]={
-"31d6cfe0d16ae931b73c59d7e0c089c0",
-"bde52cb31de33e46245e05fbdbd6fb24",
-"a448017aaf21d8525fc10ae87aa6729d",
-"d9130a8164549fe818874806e1c7014b",
-"d79e1c308aa5bbcdeea8ed63df412da9",
-"043f8582f241db351ce627e153e7f0e4",
-"e33b4ddc9c38f2199c3e7b164fcc0536",
-};
-
-static char *pt(unsigned char *md);
-int main(int argc, char *argv[])
-	{
-	int i,err=0;
-	unsigned char **P,**R;
-	char *p;
-	unsigned char md[MD4_DIGEST_LENGTH];
-
-	P=(unsigned char **)test;
-	R=(unsigned char **)ret;
-	i=1;
-	while (*P != NULL)
-		{
-		EVP_Digest(&(P[0][0]),strlen((char *)*P),md,NULL,EVP_md4(), NULL);
-		p=pt(md);
-		if (strcmp(p,(char *)*R) != 0)
-			{
-			printf("error calculating MD4 on '%s'\n",*P);
-			printf("got %s instead of %s\n",p,*R);
-			err++;
-			}
-		else
-			printf("test %d ok\n",i);
-		i++;
-		R++;
-		P++;
-		}
-	EXIT(err);
-	return(0);
-	}
-
-static char *pt(unsigned char *md)
-	{
-	int i;
-	static char buf[80];
-
-	for (i=0; i<MD4_DIGEST_LENGTH; i++)
-		sprintf(&(buf[i*2]),"%02x",md[i]);
-	return(buf);
-	}
-#endif
diff --git a/crypto/openssl/crypto/md5/Makefile b/crypto/openssl/crypto/md5/Makefile
deleted file mode 100644
index 849a0a5bacd5..000000000000
--- a/crypto/openssl/crypto/md5/Makefile
+++ /dev/null
@@ -1,120 +0,0 @@
-#
-# OpenSSL/crypto/md5/Makefile
-#
-
-DIR=    md5
-TOP=    ../..
-CC=     cc
-CPP=    $(CC) -E
-INCLUDES=-I.. -I$(TOP) -I../../include
-CFLAG=-g
-MAKEFILE=       Makefile
-AR=             ar r
-
-MD5_ASM_OBJ=
-
-CFLAGS= $(INCLUDES) $(CFLAG)
-ASFLAGS= $(INCLUDES) $(ASFLAG)
-AFLAGS= $(ASFLAGS)
-
-GENERAL=Makefile
-TEST=md5test.c
-APPS=
-
-LIB=$(TOP)/libcrypto.a
-LIBSRC=md5_dgst.c md5_one.c
-LIBOBJ=md5_dgst.o md5_one.o $(MD5_ASM_OBJ)
-
-SRC= $(LIBSRC)
-
-EXHEADER= md5.h
-HEADER= md5_locl.h $(EXHEADER)
-
-ALL=    $(GENERAL) $(SRC) $(HEADER)
-
-top:
-	(cd ../..; $(MAKE) DIRS=crypto SDIRS=$(DIR) sub_all)
-
-all:    lib
-
-lib:    $(LIBOBJ)
-	$(AR) $(LIB) $(LIBOBJ)
-	$(RANLIB) $(LIB) || echo Never mind.
-	@touch lib
-
-# ELF
-mx86-elf.s: asm/md5-586.pl ../perlasm/x86asm.pl
-	(cd asm; $(PERL) md5-586.pl elf $(CFLAGS) > ../$@)
-# COFF
-mx86-cof.s: asm/md5-586.pl ../perlasm/x86asm.pl
-	(cd asm; $(PERL) md5-586.pl coff $(CFLAGS) > ../$@)
-# a.out
-mx86-out.s: asm/md5-586.pl ../perlasm/x86asm.pl
-	(cd asm; $(PERL) md5-586.pl a.out $(CFLAGS) > ../$@)
-
-md5-sparcv8plus.o: asm/md5-sparcv9.S
-	$(CC) $(ASFLAGS) -DMD5_BLOCK_DATA_ORDER -c \
-		-o md5-sparcv8plus.o asm/md5-sparcv9.S
-
-# Old GNU assembler doesn't understand V9 instructions, so we
-# hire /usr/ccs/bin/as to do the job. Note that option is called
-# *-gcc27, but even gcc 2>=8 users may experience similar problem
-# if they didn't bother to upgrade GNU assembler. Such users should
-# not choose this option, but be adviced to *remove* GNU assembler
-# or upgrade it.
-md5-sparcv8plus-gcc27.o: asm/md5-sparcv9.S
-	$(CC) $(ASFLAGS) -DMD5_BLOCK_DATA_ORDER -E asm/md5-sparcv9.S | \
-		/usr/ccs/bin/as -xarch=v8plus - -o md5-sparcv8plus-gcc27.o
-
-md5-sparcv9.o: asm/md5-sparcv9.S
-	$(CC) $(ASFLAGS) -DMD5_BLOCK_DATA_ORDER -c \
-		-o md5-sparcv9.o asm/md5-sparcv9.S
-
-md5-x86_64.s:	asm/md5-x86_64.pl;	$(PERL) asm/md5-x86_64.pl $@
-
-files:
-	$(PERL) $(TOP)/util/files.pl Makefile >> $(TOP)/MINFO
-
-links:
-	@$(PERL) $(TOP)/util/mklink.pl ../../include/openssl $(EXHEADER)
-	@$(PERL) $(TOP)/util/mklink.pl ../../test $(TEST)
-	@$(PERL) $(TOP)/util/mklink.pl ../../apps $(APPS)
-
-install:
-	@[ -n "$(INSTALLTOP)" ] # should be set by top Makefile...
-	@headerlist="$(EXHEADER)"; for i in $$headerlist ; \
-	do  \
-	(cp $$i $(INSTALL_PREFIX)$(INSTALLTOP)/include/openssl/$$i; \
-	chmod 644 $(INSTALL_PREFIX)$(INSTALLTOP)/include/openssl/$$i ); \
-	done;
-
-tags:
-	ctags $(SRC)
-
-tests:
-
-lint:
-	lint -DLINT $(INCLUDES) $(SRC)>fluff
-
-depend:
-	@[ -n "$(MAKEDEPEND)" ] # should be set by upper Makefile...
-	$(MAKEDEPEND) -- $(CFLAG) $(INCLUDES) $(DEPFLAG) -- $(PROGS) $(LIBSRC)
-
-dclean:
-	$(PERL) -pe 'if (/^# DO NOT DELETE THIS LINE/) {print; exit(0);}' $(MAKEFILE) >Makefile.new
-	mv -f Makefile.new $(MAKEFILE)
-
-clean:
-	rm -f *.s *.o *.obj lib tags core .pure .nfs* *.old *.bak fluff
-
-# DO NOT DELETE THIS LINE -- make depend depends on it.
-
-md5_dgst.o: ../../include/openssl/e_os2.h ../../include/openssl/md5.h
-md5_dgst.o: ../../include/openssl/opensslconf.h
-md5_dgst.o: ../../include/openssl/opensslv.h ../md32_common.h md5_dgst.c
-md5_dgst.o: md5_locl.h
-md5_one.o: ../../include/openssl/crypto.h ../../include/openssl/e_os2.h
-md5_one.o: ../../include/openssl/md5.h ../../include/openssl/opensslconf.h
-md5_one.o: ../../include/openssl/opensslv.h ../../include/openssl/ossl_typ.h
-md5_one.o: ../../include/openssl/safestack.h ../../include/openssl/stack.h
-md5_one.o: ../../include/openssl/symhacks.h md5_one.c
diff --git a/crypto/openssl/crypto/md5/asm/md5-586.pl b/crypto/openssl/crypto/md5/asm/md5-586.pl
deleted file mode 100644
index fa3fa3bed59c..000000000000
--- a/crypto/openssl/crypto/md5/asm/md5-586.pl
+++ /dev/null
@@ -1,306 +0,0 @@
-#!/usr/local/bin/perl
-
-# Normal is the
-# md5_block_x86(MD5_CTX *c, ULONG *X);
-# version, non-normal is the
-# md5_block_x86(MD5_CTX *c, ULONG *X,int blocks);
-
-$normal=0;
-
-push(@INC,"perlasm","../../perlasm");
-require "x86asm.pl";
-
-&asm_init($ARGV[0],$0);
-
-$A="eax";
-$B="ebx";
-$C="ecx";
-$D="edx";
-$tmp1="edi";
-$tmp2="ebp";
-$X="esi";
-
-# What we need to load into $tmp for the next round
-%Ltmp1=("R0",&Np($C), "R1",&Np($C), "R2",&Np($C), "R3",&Np($D));
-@xo=(
- 0, 1, 2, 3, 4, 5, 6, 7, 8, 9, 10, 11, 12, 13, 14, 15,	# R0
- 1, 6, 11, 0, 5, 10, 15, 4, 9, 14, 3, 8, 13, 2, 7, 12,	# R1
- 5, 8, 11, 14, 1, 4, 7, 10, 13, 0, 3, 6, 9, 12, 15, 2,	# R2
- 0, 7, 14, 5, 12, 3, 10, 1, 8, 15, 6, 13, 4, 11, 2, 9,	# R3
- );
-
-&md5_block("md5_block_asm_host_order");
-&asm_finish();
-
-sub Np
-	{
-	local($p)=@_;
-	local(%n)=($A,$D,$B,$A,$C,$B,$D,$C);
-	return($n{$p});
-	}
-
-sub R0
-	{
-	local($pos,$a,$b,$c,$d,$K,$ki,$s,$t)=@_;
-
-	&mov($tmp1,$C)  if $pos < 0;
-	&mov($tmp2,&DWP($xo[$ki]*4,$K,"",0)) if $pos < 0; # very first one 
-
-	# body proper
-
-	&comment("R0 $ki");
-	&xor($tmp1,$d); # F function - part 2
-
-	&and($tmp1,$b); # F function - part 3
-	&lea($a,&DWP($t,$a,$tmp2,1));
-
-	&xor($tmp1,$d); # F function - part 4
-
-	&add($a,$tmp1);
-	&mov($tmp1,&Np($c)) if $pos < 1;	# next tmp1 for R0
-	&mov($tmp1,&Np($c)) if $pos == 1;	# next tmp1 for R1
-
-	&rotl($a,$s);
-
-	&mov($tmp2,&DWP($xo[$ki+1]*4,$K,"",0)) if ($pos != 2);
-
-	&add($a,$b);
-	}
-
-sub R1
-	{
-	local($pos,$a,$b,$c,$d,$K,$ki,$s,$t)=@_;
-
-	&comment("R1 $ki");
-
-	&lea($a,&DWP($t,$a,$tmp2,1));
-
-	&xor($tmp1,$b); # G function - part 2
-	&and($tmp1,$d); # G function - part 3
-
-	&mov($tmp2,&DWP($xo[$ki+1]*4,$K,"",0)) if ($pos != 2);
-	&xor($tmp1,$c);			# G function - part 4
-
-	&add($a,$tmp1);
-	&mov($tmp1,&Np($c)) if $pos < 1;	# G function - part 1
-	&mov($tmp1,&Np($c)) if $pos == 1;	# G function - part 1
-
-	&rotl($a,$s);
-
-	&add($a,$b);
-	}
-
-sub R2
-	{
-	local($n,$pos,$a,$b,$c,$d,$K,$ki,$s,$t)=@_;
-	# This one is different, only 3 logical operations
-
-if (($n & 1) == 0)
-	{
-	&comment("R2 $ki");
-	# make sure to do 'D' first, not 'B', else we clash with
-	# the last add from the previous round.
-
-	&xor($tmp1,$d); # H function - part 2
-
-	&xor($tmp1,$b); # H function - part 3
-	&lea($a,&DWP($t,$a,$tmp2,1));
-
-	&add($a,$tmp1);
-
-	&rotl($a,$s);
-
-	&mov($tmp2,&DWP($xo[$ki+1]*4,$K,"",0));
-	&mov($tmp1,&Np($c));
-	}
-else
-	{
-	&comment("R2 $ki");
-	# make sure to do 'D' first, not 'B', else we clash with
-	# the last add from the previous round.
-
-	&lea($a,&DWP($t,$a,$tmp2,1));
-
-	&add($b,$c);			# MOVED FORWARD
-	&xor($tmp1,$d); # H function - part 2
-
-	&xor($tmp1,$b); # H function - part 3
-	&mov($tmp2,&DWP($xo[$ki+1]*4,$K,"",0)) if ($pos != 2);
-
-	&add($a,$tmp1);
-	&mov($tmp1,&Np($c)) if $pos < 1;	# H function - part 1
-	&mov($tmp1,-1) if $pos == 1;		# I function - part 1
-
-	&rotl($a,$s);
-
-	&add($a,$b);
-	}
-	}
-
-sub R3
-	{
-	local($pos,$a,$b,$c,$d,$K,$ki,$s,$t)=@_;
-
-	&comment("R3 $ki");
-
-	# &not($tmp1)
-	&xor($tmp1,$d) if $pos < 0; 	# I function - part 2
-
-	&or($tmp1,$b);				# I function - part 3
-	&lea($a,&DWP($t,$a,$tmp2,1));
-
-	&xor($tmp1,$c); 			# I function - part 4
-	&mov($tmp2,&DWP($xo[$ki+1]*4,$K,"",0))	if $pos != 2; # load X/k value
-	&mov($tmp2,&wparam(0)) if $pos == 2;
-
-	&add($a,$tmp1);
-	&mov($tmp1,-1) if $pos < 1;	# H function - part 1
-	&add($K,64) if $pos >=1 && !$normal;
-
-	&rotl($a,$s);
-
-	&xor($tmp1,&Np($d)) if $pos <= 0; 	# I function - part = first time
-	&mov($tmp1,&DWP( 0,$tmp2,"",0)) if $pos > 0;
-	&add($a,$b);
-	}
-
-
-sub md5_block
-	{
-	local($name)=@_;
-
-	&function_begin_B($name,"",3);
-
-	# parameter 1 is the MD5_CTX structure.
-	# A	0
-	# B	4
-	# C	8
-	# D 	12
-
-	&push("esi");
-	 &push("edi");
-	&mov($tmp1,	&wparam(0)); # edi
-	 &mov($X,	&wparam(1)); # esi
-	&mov($C,	&wparam(2));
-	 &push("ebp");
-	&shl($C,	6);
-	&push("ebx");
-	 &add($C,	$X); # offset we end at
-	&sub($C,	64);
-	 &mov($A,	&DWP( 0,$tmp1,"",0));
-	&push($C);	# Put on the TOS
-	 &mov($B,	&DWP( 4,$tmp1,"",0));
-	&mov($C,	&DWP( 8,$tmp1,"",0));
-	 &mov($D,	&DWP(12,$tmp1,"",0));
-
-	&set_label("start") unless $normal;
-	&comment("");
-	&comment("R0 section");
-
-	&R0(-2,$A,$B,$C,$D,$X, 0, 7,0xd76aa478);
-	&R0( 0,$D,$A,$B,$C,$X, 1,12,0xe8c7b756);
-	&R0( 0,$C,$D,$A,$B,$X, 2,17,0x242070db);
-	&R0( 0,$B,$C,$D,$A,$X, 3,22,0xc1bdceee);
-	&R0( 0,$A,$B,$C,$D,$X, 4, 7,0xf57c0faf);
-	&R0( 0,$D,$A,$B,$C,$X, 5,12,0x4787c62a);
-	&R0( 0,$C,$D,$A,$B,$X, 6,17,0xa8304613);
-	&R0( 0,$B,$C,$D,$A,$X, 7,22,0xfd469501);
-	&R0( 0,$A,$B,$C,$D,$X, 8, 7,0x698098d8);
-	&R0( 0,$D,$A,$B,$C,$X, 9,12,0x8b44f7af);
-	&R0( 0,$C,$D,$A,$B,$X,10,17,0xffff5bb1);
-	&R0( 0,$B,$C,$D,$A,$X,11,22,0x895cd7be);
-	&R0( 0,$A,$B,$C,$D,$X,12, 7,0x6b901122);
-	&R0( 0,$D,$A,$B,$C,$X,13,12,0xfd987193);
-	&R0( 0,$C,$D,$A,$B,$X,14,17,0xa679438e);
-	&R0( 1,$B,$C,$D,$A,$X,15,22,0x49b40821);
-
-	&comment("");
-	&comment("R1 section");
-	&R1(-1,$A,$B,$C,$D,$X,16, 5,0xf61e2562);
-	&R1( 0,$D,$A,$B,$C,$X,17, 9,0xc040b340);
-	&R1( 0,$C,$D,$A,$B,$X,18,14,0x265e5a51);
-	&R1( 0,$B,$C,$D,$A,$X,19,20,0xe9b6c7aa);
-	&R1( 0,$A,$B,$C,$D,$X,20, 5,0xd62f105d);
-	&R1( 0,$D,$A,$B,$C,$X,21, 9,0x02441453);
-	&R1( 0,$C,$D,$A,$B,$X,22,14,0xd8a1e681);
-	&R1( 0,$B,$C,$D,$A,$X,23,20,0xe7d3fbc8);
-	&R1( 0,$A,$B,$C,$D,$X,24, 5,0x21e1cde6);
-	&R1( 0,$D,$A,$B,$C,$X,25, 9,0xc33707d6);
-	&R1( 0,$C,$D,$A,$B,$X,26,14,0xf4d50d87);
-	&R1( 0,$B,$C,$D,$A,$X,27,20,0x455a14ed);
-	&R1( 0,$A,$B,$C,$D,$X,28, 5,0xa9e3e905);
-	&R1( 0,$D,$A,$B,$C,$X,29, 9,0xfcefa3f8);
-	&R1( 0,$C,$D,$A,$B,$X,30,14,0x676f02d9);
-	&R1( 1,$B,$C,$D,$A,$X,31,20,0x8d2a4c8a);
-
-	&comment("");
-	&comment("R2 section");
-	&R2( 0,-1,$A,$B,$C,$D,$X,32, 4,0xfffa3942);
-	&R2( 1, 0,$D,$A,$B,$C,$X,33,11,0x8771f681);
-	&R2( 2, 0,$C,$D,$A,$B,$X,34,16,0x6d9d6122);
-	&R2( 3, 0,$B,$C,$D,$A,$X,35,23,0xfde5380c);
-	&R2( 4, 0,$A,$B,$C,$D,$X,36, 4,0xa4beea44);
-	&R2( 5, 0,$D,$A,$B,$C,$X,37,11,0x4bdecfa9);
-	&R2( 6, 0,$C,$D,$A,$B,$X,38,16,0xf6bb4b60);
-	&R2( 7, 0,$B,$C,$D,$A,$X,39,23,0xbebfbc70);
-	&R2( 8, 0,$A,$B,$C,$D,$X,40, 4,0x289b7ec6);
-	&R2( 9, 0,$D,$A,$B,$C,$X,41,11,0xeaa127fa);
-	&R2(10, 0,$C,$D,$A,$B,$X,42,16,0xd4ef3085);
-	&R2(11, 0,$B,$C,$D,$A,$X,43,23,0x04881d05);
-	&R2(12, 0,$A,$B,$C,$D,$X,44, 4,0xd9d4d039);
-	&R2(13, 0,$D,$A,$B,$C,$X,45,11,0xe6db99e5);
-	&R2(14, 0,$C,$D,$A,$B,$X,46,16,0x1fa27cf8);
-	&R2(15, 1,$B,$C,$D,$A,$X,47,23,0xc4ac5665);
-
-	&comment("");
-	&comment("R3 section");
-	&R3(-1,$A,$B,$C,$D,$X,48, 6,0xf4292244);
-	&R3( 0,$D,$A,$B,$C,$X,49,10,0x432aff97);
-	&R3( 0,$C,$D,$A,$B,$X,50,15,0xab9423a7);
-	&R3( 0,$B,$C,$D,$A,$X,51,21,0xfc93a039);
-	&R3( 0,$A,$B,$C,$D,$X,52, 6,0x655b59c3);
-	&R3( 0,$D,$A,$B,$C,$X,53,10,0x8f0ccc92);
-	&R3( 0,$C,$D,$A,$B,$X,54,15,0xffeff47d);
-	&R3( 0,$B,$C,$D,$A,$X,55,21,0x85845dd1);
-	&R3( 0,$A,$B,$C,$D,$X,56, 6,0x6fa87e4f);
-	&R3( 0,$D,$A,$B,$C,$X,57,10,0xfe2ce6e0);
-	&R3( 0,$C,$D,$A,$B,$X,58,15,0xa3014314);
-	&R3( 0,$B,$C,$D,$A,$X,59,21,0x4e0811a1);
-	&R3( 0,$A,$B,$C,$D,$X,60, 6,0xf7537e82);
-	&R3( 0,$D,$A,$B,$C,$X,61,10,0xbd3af235);
-	&R3( 0,$C,$D,$A,$B,$X,62,15,0x2ad7d2bb);
-	&R3( 2,$B,$C,$D,$A,$X,63,21,0xeb86d391);
-
-	# &mov($tmp2,&wparam(0));	# done in the last R3
-	# &mov($tmp1,	&DWP( 0,$tmp2,"",0)); # done is the last R3
-
-	&add($A,$tmp1);
-	 &mov($tmp1,	&DWP( 4,$tmp2,"",0));
-
-	&add($B,$tmp1);
-	&mov($tmp1,	&DWP( 8,$tmp2,"",0));
-
-	&add($C,$tmp1);
-	&mov($tmp1,	&DWP(12,$tmp2,"",0));
-
-	&add($D,$tmp1);
-	&mov(&DWP( 0,$tmp2,"",0),$A);
-
-	&mov(&DWP( 4,$tmp2,"",0),$B);
-	&mov($tmp1,&swtmp(0)) unless $normal;
-
-	&mov(&DWP( 8,$tmp2,"",0),$C);
-	 &mov(&DWP(12,$tmp2,"",0),$D);
-
-	&cmp($tmp1,$X) unless $normal;			# check count
-	 &jae(&label("start")) unless $normal;
-
-	&pop("eax"); # pop the temp variable off the stack
-	 &pop("ebx");
-	&pop("ebp");
-	 &pop("edi");
-	&pop("esi");
-	 &ret();
-	&function_end_B($name);
-	}
-
diff --git a/crypto/openssl/crypto/md5/asm/md5-sparcv9.S b/crypto/openssl/crypto/md5/asm/md5-sparcv9.S
deleted file mode 100644
index db45aa4c9774..000000000000
--- a/crypto/openssl/crypto/md5/asm/md5-sparcv9.S
+++ /dev/null
@@ -1,1031 +0,0 @@
-.ident	"md5-sparcv9.S, Version 1.0"
-.ident	"SPARC V9 ISA artwork by Andy Polyakov <appro@fy.chalmers.se>"
-.file	"md5-sparcv9.S"
-
-/*
- * ====================================================================
- * Copyright (c) 1999 Andy Polyakov <appro@fy.chalmers.se>.
- *
- * Rights for redistribution and usage in source and binary forms are
- * granted as long as above copyright notices are retained. Warranty
- * of any kind is (of course:-) disclaimed.
- * ====================================================================
- */
-
-/*
- * This is my modest contribution to OpenSSL project (see
- * http://www.openssl.org/ for more information about it) and is an
- * assembler implementation of MD5 block hash function. I've hand-coded
- * this for the sole reason to reach UltraSPARC-specific "load in
- * little-endian byte order" instruction. This gives up to 15%
- * performance improvement for cases when input message is aligned at
- * 32 bits boundary. The module was tested under both 32 *and* 64 bit
- * kernels. For updates see http://fy.chalmers.se/~appro/hpe/.
- *
- * To compile with SC4.x/SC5.x:
- *
- *	cc -xarch=v[9|8plus] -DOPENSSL_SYSNAME_ULTRASPARC -DMD5_BLOCK_DATA_ORDER \
- *		-c md5-sparcv9.S
- *
- * and with gcc:
- *
- *	gcc -mcpu=ultrasparc -DOPENSSL_SYSNAME_ULTRASPARC -DMD5_BLOCK_DATA_ORDER \
- *		-c md5-sparcv9.S
- *
- * or if above fails (it does if you have gas):
- *
- *	gcc -E -DOPENSSL_SYSNAMEULTRASPARC -DMD5_BLOCK_DATA_ORDER md5_block.sparc.S | \
- *		as -xarch=v8plus /dev/fd/0 -o md5-sparcv9.o
- */
-
-#include <openssl/e_os2.h>
-
-#define	A	%o0
-#define B	%o1
-#define	C	%o2
-#define	D	%o3
-#define	T1	%o4
-#define	T2	%o5
-
-#define	R0	%l0
-#define	R1	%l1
-#define	R2	%l2
-#define	R3	%l3
-#define	R4	%l4
-#define	R5	%l5
-#define	R6	%l6
-#define	R7	%l7
-#define	R8	%i3
-#define	R9	%i4
-#define	R10	%i5
-#define	R11	%g1
-#define R12	%g2
-#define	R13	%g3
-#define RX	%g4
-
-#define Aptr	%i0+0
-#define Bptr	%i0+4
-#define Cptr	%i0+8
-#define Dptr	%i0+12
-
-#define Aval	R5	/* those not used at the end of the last round */
-#define Bval	R6
-#define Cval	R7
-#define Dval	R8
-
-#if defined(MD5_BLOCK_DATA_ORDER)
-# if defined(OPENSSL_SYSNAME_ULTRASPARC)
-#  define	LOAD			lda
-#  define	X(i)			[%i1+i*4]%asi
-#  define	md5_block		md5_block_asm_data_order_aligned
-#  define	ASI_PRIMARY_LITTLE	0x88
-# else
-#  error "MD5_BLOCK_DATA_ORDER is supported only on UltraSPARC!"
-# endif
-#else
-# define	LOAD			ld
-# define	X(i)			[%i1+i*4]
-# define	md5_block		md5_block_asm_host_order
-#endif
-
-.section        ".text",#alloc,#execinstr
-
-#if defined(__SUNPRO_C) && defined(__sparcv9)
-  /* They've said -xarch=v9 at command line */
-  .register	%g2,#scratch
-  .register	%g3,#scratch
-# define	FRAME	-192
-#elif defined(__GNUC__) && defined(__arch64__)
-  /* They've said -m64 at command line */
-  .register     %g2,#scratch
-  .register     %g3,#scratch
-# define        FRAME   -192
-#else
-# define	FRAME	-96
-#endif
-
-.align  32
-
-.global md5_block
-md5_block:
-	save	%sp,FRAME,%sp
-
-	ld	[Dptr],D
-	ld	[Cptr],C
-	ld	[Bptr],B
-	ld	[Aptr],A
-#ifdef ASI_PRIMARY_LITTLE
-	rd	%asi,%o7	! How dare I? Well, I just do:-)
-	wr	%g0,ASI_PRIMARY_LITTLE,%asi
-#endif
-	LOAD	X(0),R0
-
-.Lmd5_block_loop:
-
-!!!!!!!!Round 0
-
-	xor	C,D,T1
-	sethi	%hi(0xd76aa478),T2
-	and	T1,B,T1
-	or	T2,%lo(0xd76aa478),T2	!=
-	xor	T1,D,T1
-	add	T1,R0,T1
-	LOAD	X(1),R1
-	add	T1,T2,T1		!=
-	add	A,T1,A
-	sll	A,7,T2
-	srl	A,32-7,A
-	or	A,T2,A			!=
-	 xor	 B,C,T1
-	add	A,B,A
-
-	sethi	%hi(0xe8c7b756),T2
-	and	T1,A,T1			!=
-	or	T2,%lo(0xe8c7b756),T2
-	xor	T1,C,T1
-	LOAD	X(2),R2
-	add	T1,R1,T1		!=
-	add	T1,T2,T1
-	add	D,T1,D
-	sll	D,12,T2
-	srl	D,32-12,D		!=
-	or	D,T2,D
-	 xor	 A,B,T1
-	add	D,A,D
-
-	sethi	%hi(0x242070db),T2	!=
-	and	T1,D,T1
-	or	T2,%lo(0x242070db),T2
-	xor	T1,B,T1
-	add	T1,R2,T1		!=
-	LOAD	X(3),R3
-	add	T1,T2,T1
-	add	C,T1,C
-	sll	C,17,T2			!=
-	srl	C,32-17,C
-	or	C,T2,C
-	 xor	 D,A,T1
-	add	C,D,C			!=
-
-	sethi	%hi(0xc1bdceee),T2
-	and	T1,C,T1
-	or	T2,%lo(0xc1bdceee),T2
-	xor	T1,A,T1			!=
-	add	T1,R3,T1
-	LOAD	X(4),R4
-	add	T1,T2,T1
-	add	B,T1,B			!=
-	sll	B,22,T2
-	srl	B,32-22,B
-	or	B,T2,B
-	 xor	 C,D,T1			!=
-	add	B,C,B
-
-	sethi	%hi(0xf57c0faf),T2
-	and	T1,B,T1
-	or	T2,%lo(0xf57c0faf),T2	!=
-	xor	T1,D,T1
-	add	T1,R4,T1
-	LOAD	X(5),R5
-	add	T1,T2,T1		!=
-	add	A,T1,A
-	sll	A,7,T2
-	srl	A,32-7,A
-	or	A,T2,A			!=
-	 xor	 B,C,T1
-	add	A,B,A
-
-	sethi	%hi(0x4787c62a),T2
-	and	T1,A,T1			!=
-	or	T2,%lo(0x4787c62a),T2
-	xor	T1,C,T1
-	LOAD	X(6),R6
-	add	T1,R5,T1		!=
-	add	T1,T2,T1
-	add	D,T1,D
-	sll	D,12,T2
-	srl	D,32-12,D		!=
-	or	D,T2,D
-	 xor	 A,B,T1
-	add	D,A,D
-
-	sethi	%hi(0xa8304613),T2	!=
-	and	T1,D,T1
-	or	T2,%lo(0xa8304613),T2
-	xor	T1,B,T1
-	add	T1,R6,T1		!=
-	LOAD	X(7),R7
-	add	T1,T2,T1
-	add	C,T1,C
-	sll	C,17,T2			!=
-	srl	C,32-17,C
-	or	C,T2,C
-	 xor	 D,A,T1
-	add	C,D,C			!=
-
-	sethi	%hi(0xfd469501),T2
-	and	T1,C,T1
-	or	T2,%lo(0xfd469501),T2
-	xor	T1,A,T1			!=
-	add	T1,R7,T1
-	LOAD	X(8),R8
-	add	T1,T2,T1
-	add	B,T1,B			!=
-	sll	B,22,T2
-	srl	B,32-22,B
-	or	B,T2,B
-	 xor	 C,D,T1			!=
-	add	B,C,B
-
-	sethi	%hi(0x698098d8),T2
-	and	T1,B,T1
-	or	T2,%lo(0x698098d8),T2	!=
-	xor	T1,D,T1
-	add	T1,R8,T1
-	LOAD	X(9),R9
-	add	T1,T2,T1		!=
-	add	A,T1,A
-	sll	A,7,T2
-	srl	A,32-7,A
-	or	A,T2,A			!=
-	 xor	 B,C,T1
-	add	A,B,A
-
-	sethi	%hi(0x8b44f7af),T2
-	and	T1,A,T1			!=
-	or	T2,%lo(0x8b44f7af),T2
-	xor	T1,C,T1
-	LOAD	X(10),R10
-	add	T1,R9,T1		!=
-	add	T1,T2,T1
-	add	D,T1,D
-	sll	D,12,T2
-	srl	D,32-12,D		!=
-	or	D,T2,D
-	 xor	 A,B,T1
-	add	D,A,D
-
-	sethi	%hi(0xffff5bb1),T2	!=
-	and	T1,D,T1
-	or	T2,%lo(0xffff5bb1),T2
-	xor	T1,B,T1
-	add	T1,R10,T1		!=
-	LOAD	X(11),R11
-	add	T1,T2,T1
-	add	C,T1,C
-	sll	C,17,T2			!=
-	srl	C,32-17,C
-	or	C,T2,C
-	 xor	 D,A,T1
-	add	C,D,C			!=
-
-	sethi	%hi(0x895cd7be),T2
-	and	T1,C,T1
-	or	T2,%lo(0x895cd7be),T2
-	xor	T1,A,T1			!=
-	add	T1,R11,T1
-	LOAD	X(12),R12
-	add	T1,T2,T1
-	add	B,T1,B			!=
-	sll	B,22,T2
-	srl	B,32-22,B
-	or	B,T2,B
-	 xor	 C,D,T1			!=
-	add	B,C,B
-
-	sethi	%hi(0x6b901122),T2
-	and	T1,B,T1
-	or	T2,%lo(0x6b901122),T2	!=
-	xor	T1,D,T1
-	add	T1,R12,T1
-	LOAD	X(13),R13
-	add	T1,T2,T1		!=
-	add	A,T1,A
-	sll	A,7,T2
-	srl	A,32-7,A
-	or	A,T2,A			!=
-	 xor	 B,C,T1
-	add	A,B,A
-
-	sethi	%hi(0xfd987193),T2
-	and	T1,A,T1			!=
-	or	T2,%lo(0xfd987193),T2
-	xor	T1,C,T1
-	LOAD	X(14),RX
-	add	T1,R13,T1		!=
-	add	T1,T2,T1
-	add	D,T1,D
-	sll	D,12,T2
-	srl	D,32-12,D		!=
-	or	D,T2,D
-	 xor	 A,B,T1
-	add	D,A,D
-
-	sethi	%hi(0xa679438e),T2	!=
-	and	T1,D,T1
-	or	T2,%lo(0xa679438e),T2
-	xor	T1,B,T1
-	add	T1,RX,T1		!=
-	LOAD	X(15),RX
-	add	T1,T2,T1
-	add	C,T1,C
-	sll	C,17,T2			!=
-	srl	C,32-17,C
-	or	C,T2,C
-	 xor	 D,A,T1
-	add	C,D,C			!=
-
-	sethi	%hi(0x49b40821),T2
-	and	T1,C,T1
-	or	T2,%lo(0x49b40821),T2
-	xor	T1,A,T1			!=
-	add	T1,RX,T1
-	!pre-LOADed	X(1),R1
-	add	T1,T2,T1
-	add	B,T1,B
-	sll	B,22,T2			!=
-	srl	B,32-22,B
-	or	B,T2,B
-	add	B,C,B
-
-!!!!!!!!Round 1
-
-	xor	B,C,T1			!=
-	sethi	%hi(0xf61e2562),T2
-	and	T1,D,T1
-	or	T2,%lo(0xf61e2562),T2
-	xor	T1,C,T1			!=
-	add	T1,R1,T1
-	!pre-LOADed	X(6),R6
-	add	T1,T2,T1
-	add	A,T1,A
-	sll	A,5,T2			!=
-	srl	A,32-5,A
-	or	A,T2,A
-	add	A,B,A
-
-	xor	A,B,T1			!=
-	sethi	%hi(0xc040b340),T2
-	and	T1,C,T1
-	or	T2,%lo(0xc040b340),T2
-	xor	T1,B,T1			!=
-	add	T1,R6,T1
-	!pre-LOADed	X(11),R11
-	add	T1,T2,T1
-	add	D,T1,D
-	sll	D,9,T2			!=
-	srl	D,32-9,D
-	or	D,T2,D
-	add	D,A,D
-
-	xor	D,A,T1			!=
-	sethi	%hi(0x265e5a51),T2
-	and	T1,B,T1
-	or	T2,%lo(0x265e5a51),T2
-	xor	T1,A,T1			!=
-	add	T1,R11,T1
-	!pre-LOADed	X(0),R0
-	add	T1,T2,T1
-	add	C,T1,C
-	sll	C,14,T2			!=
-	srl	C,32-14,C
-	or	C,T2,C
-	add	C,D,C
-
-	xor	C,D,T1			!=
-	sethi	%hi(0xe9b6c7aa),T2
-	and	T1,A,T1
-	or	T2,%lo(0xe9b6c7aa),T2
-	xor	T1,D,T1			!=
-	add	T1,R0,T1
-	!pre-LOADed	X(5),R5
-	add	T1,T2,T1
-	add	B,T1,B
-	sll	B,20,T2			!=
-	srl	B,32-20,B
-	or	B,T2,B
-	add	B,C,B
-
-	xor	B,C,T1			!=
-	sethi	%hi(0xd62f105d),T2
-	and	T1,D,T1
-	or	T2,%lo(0xd62f105d),T2
-	xor	T1,C,T1			!=
-	add	T1,R5,T1
-	!pre-LOADed	X(10),R10
-	add	T1,T2,T1
-	add	A,T1,A
-	sll	A,5,T2			!=
-	srl	A,32-5,A
-	or	A,T2,A
-	add	A,B,A
-
-	xor	A,B,T1			!=
-	sethi	%hi(0x02441453),T2
-	and	T1,C,T1
-	or	T2,%lo(0x02441453),T2
-	xor	T1,B,T1			!=
-	add	T1,R10,T1
-	LOAD	X(15),RX
-	add	T1,T2,T1
-	add	D,T1,D			!=
-	sll	D,9,T2
-	srl	D,32-9,D
-	or	D,T2,D
-	add	D,A,D			!=
-
-	xor	D,A,T1
-	sethi	%hi(0xd8a1e681),T2
-	and	T1,B,T1
-	or	T2,%lo(0xd8a1e681),T2	!=
-	xor	T1,A,T1
-	add	T1,RX,T1
-	!pre-LOADed	X(4),R4
-	add	T1,T2,T1
-	add	C,T1,C			!=
-	sll	C,14,T2
-	srl	C,32-14,C
-	or	C,T2,C
-	add	C,D,C			!=
-
-	xor	C,D,T1
-	sethi	%hi(0xe7d3fbc8),T2
-	and	T1,A,T1
-	or	T2,%lo(0xe7d3fbc8),T2	!=
-	xor	T1,D,T1
-	add	T1,R4,T1
-	!pre-LOADed	X(9),R9
-	add	T1,T2,T1
-	add	B,T1,B			!=
-	sll	B,20,T2
-	srl	B,32-20,B
-	or	B,T2,B
-	add	B,C,B			!=
-
-	xor	B,C,T1
-	sethi	%hi(0x21e1cde6),T2
-	and	T1,D,T1
-	or	T2,%lo(0x21e1cde6),T2	!=
-	xor	T1,C,T1
-	add	T1,R9,T1
-	LOAD	X(14),RX
-	add	T1,T2,T1		!=
-	add	A,T1,A
-	sll	A,5,T2
-	srl	A,32-5,A
-	or	A,T2,A			!=
-	add	A,B,A
-
-	xor	A,B,T1
-	sethi	%hi(0xc33707d6),T2
-	and	T1,C,T1			!=
-	or	T2,%lo(0xc33707d6),T2
-	xor	T1,B,T1
-	add	T1,RX,T1
-	!pre-LOADed	X(3),R3
-	add	T1,T2,T1		!=
-	add	D,T1,D
-	sll	D,9,T2
-	srl	D,32-9,D
-	or	D,T2,D			!=
-	add	D,A,D
-
-	xor	D,A,T1
-	sethi	%hi(0xf4d50d87),T2
-	and	T1,B,T1			!=
-	or	T2,%lo(0xf4d50d87),T2
-	xor	T1,A,T1
-	add	T1,R3,T1
-	!pre-LOADed	X(8),R8
-	add	T1,T2,T1		!=
-	add	C,T1,C
-	sll	C,14,T2
-	srl	C,32-14,C
-	or	C,T2,C			!=
-	add	C,D,C
-
-	xor	C,D,T1
-	sethi	%hi(0x455a14ed),T2
-	and	T1,A,T1			!=
-	or	T2,%lo(0x455a14ed),T2
-	xor	T1,D,T1
-	add	T1,R8,T1
-	!pre-LOADed	X(13),R13
-	add	T1,T2,T1		!=
-	add	B,T1,B
-	sll	B,20,T2
-	srl	B,32-20,B
-	or	B,T2,B			!=
-	add	B,C,B
-
-	xor	B,C,T1
-	sethi	%hi(0xa9e3e905),T2
-	and	T1,D,T1			!=
-	or	T2,%lo(0xa9e3e905),T2
-	xor	T1,C,T1
-	add	T1,R13,T1
-	!pre-LOADed	X(2),R2
-	add	T1,T2,T1		!=
-	add	A,T1,A
-	sll	A,5,T2
-	srl	A,32-5,A
-	or	A,T2,A			!=
-	add	A,B,A
-
-	xor	A,B,T1
-	sethi	%hi(0xfcefa3f8),T2
-	and	T1,C,T1			!=
-	or	T2,%lo(0xfcefa3f8),T2
-	xor	T1,B,T1
-	add	T1,R2,T1
-	!pre-LOADed	X(7),R7
-	add	T1,T2,T1		!=
-	add	D,T1,D
-	sll	D,9,T2
-	srl	D,32-9,D
-	or	D,T2,D			!=
-	add	D,A,D
-
-	xor	D,A,T1
-	sethi	%hi(0x676f02d9),T2
-	and	T1,B,T1			!=
-	or	T2,%lo(0x676f02d9),T2
-	xor	T1,A,T1
-	add	T1,R7,T1
-	!pre-LOADed	X(12),R12
-	add	T1,T2,T1		!=
-	add	C,T1,C
-	sll	C,14,T2
-	srl	C,32-14,C
-	or	C,T2,C			!=
-	add	C,D,C
-
-	xor	C,D,T1
-	sethi	%hi(0x8d2a4c8a),T2
-	and	T1,A,T1			!=
-	or	T2,%lo(0x8d2a4c8a),T2
-	xor	T1,D,T1
-	add	T1,R12,T1
-	!pre-LOADed	X(5),R5
-	add	T1,T2,T1		!=
-	add	B,T1,B
-	sll	B,20,T2
-	srl	B,32-20,B
-	or	B,T2,B			!=
-	add	B,C,B
-
-!!!!!!!!Round 2
-
-	xor	B,C,T1
-	sethi	%hi(0xfffa3942),T2
-	xor	T1,D,T1			!=
-	or	T2,%lo(0xfffa3942),T2
-	add	T1,R5,T1
-	!pre-LOADed	X(8),R8
-	add	T1,T2,T1
-	add	A,T1,A			!=
-	sll	A,4,T2
-	srl	A,32-4,A
-	or	A,T2,A
-	add	A,B,A			!=
-
-	xor	A,B,T1
-	sethi	%hi(0x8771f681),T2
-	xor	T1,C,T1
-	or	T2,%lo(0x8771f681),T2	!=
-	add	T1,R8,T1
-	!pre-LOADed	X(11),R11
-	add	T1,T2,T1
-	add	D,T1,D
-	sll	D,11,T2			!=
-	srl	D,32-11,D
-	or	D,T2,D
-	add	D,A,D
-
-	xor	D,A,T1			!=
-	sethi	%hi(0x6d9d6122),T2
-	xor	T1,B,T1
-	or	T2,%lo(0x6d9d6122),T2
-	add	T1,R11,T1		!=
-	LOAD	X(14),RX
-	add	T1,T2,T1
-	add	C,T1,C
-	sll	C,16,T2			!=
-	srl	C,32-16,C
-	or	C,T2,C
-	add	C,D,C
-
-	xor	C,D,T1			!=
-	sethi	%hi(0xfde5380c),T2
-	xor	T1,A,T1
-	or	T2,%lo(0xfde5380c),T2
-	add	T1,RX,T1		!=
-	!pre-LOADed	X(1),R1
-	add	T1,T2,T1
-	add	B,T1,B
-	sll	B,23,T2
-	srl	B,32-23,B		!=
-	or	B,T2,B
-	add	B,C,B
-
-	xor	B,C,T1
-	sethi	%hi(0xa4beea44),T2	!=
-	xor	T1,D,T1
-	or	T2,%lo(0xa4beea44),T2
-	add	T1,R1,T1
-	!pre-LOADed	X(4),R4
-	add	T1,T2,T1		!=
-	add	A,T1,A
-	sll	A,4,T2
-	srl	A,32-4,A
-	or	A,T2,A			!=
-	add	A,B,A
-
-	xor	A,B,T1
-	sethi	%hi(0x4bdecfa9),T2
-	xor	T1,C,T1			!=
-	or	T2,%lo(0x4bdecfa9),T2
-	add	T1,R4,T1
-	!pre-LOADed	X(7),R7
-	add	T1,T2,T1
-	add	D,T1,D			!=
-	sll	D,11,T2
-	srl	D,32-11,D
-	or	D,T2,D
-	add	D,A,D			!=
-
-	xor	D,A,T1
-	sethi	%hi(0xf6bb4b60),T2
-	xor	T1,B,T1
-	or	T2,%lo(0xf6bb4b60),T2	!=
-	add	T1,R7,T1
-	!pre-LOADed	X(10),R10
-	add	T1,T2,T1
-	add	C,T1,C
-	sll	C,16,T2			!=
-	srl	C,32-16,C
-	or	C,T2,C
-	add	C,D,C
-
-	xor	C,D,T1			!=
-	sethi	%hi(0xbebfbc70),T2
-	xor	T1,A,T1
-	or	T2,%lo(0xbebfbc70),T2
-	add	T1,R10,T1		!=
-	!pre-LOADed	X(13),R13
-	add	T1,T2,T1
-	add	B,T1,B
-	sll	B,23,T2
-	srl	B,32-23,B		!=
-	or	B,T2,B
-	add	B,C,B
-
-	xor	B,C,T1
-	sethi	%hi(0x289b7ec6),T2	!=
-	xor	T1,D,T1
-	or	T2,%lo(0x289b7ec6),T2
-	add	T1,R13,T1
-	!pre-LOADed	X(0),R0
-	add	T1,T2,T1		!=
-	add	A,T1,A
-	sll	A,4,T2
-	srl	A,32-4,A
-	or	A,T2,A			!=
-	add	A,B,A
-
-	xor	A,B,T1
-	sethi	%hi(0xeaa127fa),T2
-	xor	T1,C,T1			!=
-	or	T2,%lo(0xeaa127fa),T2
-	add	T1,R0,T1
-	!pre-LOADed	X(3),R3
-	add	T1,T2,T1
-	add	D,T1,D			!=
-	sll	D,11,T2
-	srl	D,32-11,D
-	or	D,T2,D
-	add	D,A,D			!=
-
-	xor	D,A,T1
-	sethi	%hi(0xd4ef3085),T2
-	xor	T1,B,T1
-	or	T2,%lo(0xd4ef3085),T2	!=
-	add	T1,R3,T1
-	!pre-LOADed	X(6),R6
-	add	T1,T2,T1
-	add	C,T1,C
-	sll	C,16,T2			!=
-	srl	C,32-16,C
-	or	C,T2,C
-	add	C,D,C
-
-	xor	C,D,T1			!=
-	sethi	%hi(0x04881d05),T2
-	xor	T1,A,T1
-	or	T2,%lo(0x04881d05),T2
-	add	T1,R6,T1		!=
-	!pre-LOADed	X(9),R9
-	add	T1,T2,T1
-	add	B,T1,B
-	sll	B,23,T2
-	srl	B,32-23,B		!=
-	or	B,T2,B
-	add	B,C,B
-
-	xor	B,C,T1
-	sethi	%hi(0xd9d4d039),T2	!=
-	xor	T1,D,T1
-	or	T2,%lo(0xd9d4d039),T2
-	add	T1,R9,T1
-	!pre-LOADed	X(12),R12
-	add	T1,T2,T1		!=
-	add	A,T1,A
-	sll	A,4,T2
-	srl	A,32-4,A
-	or	A,T2,A			!=
-	add	A,B,A
-
-	xor	A,B,T1
-	sethi	%hi(0xe6db99e5),T2
-	xor	T1,C,T1			!=
-	or	T2,%lo(0xe6db99e5),T2
-	add	T1,R12,T1
-	LOAD	X(15),RX
-	add	T1,T2,T1		!=
-	add	D,T1,D
-	sll	D,11,T2
-	srl	D,32-11,D
-	or	D,T2,D			!=
-	add	D,A,D
-
-	xor	D,A,T1
-	sethi	%hi(0x1fa27cf8),T2
-	xor	T1,B,T1			!=
-	or	T2,%lo(0x1fa27cf8),T2
-	add	T1,RX,T1
-	!pre-LOADed	X(2),R2
-	add	T1,T2,T1
-	add	C,T1,C			!=
-	sll	C,16,T2
-	srl	C,32-16,C
-	or	C,T2,C
-	add	C,D,C			!=
-
-	xor	C,D,T1
-	sethi	%hi(0xc4ac5665),T2
-	xor	T1,A,T1
-	or	T2,%lo(0xc4ac5665),T2	!=
-	add	T1,R2,T1
-	!pre-LOADed	X(0),R0
-	add	T1,T2,T1
-	add	B,T1,B
-	sll	B,23,T2			!=
-	srl	B,32-23,B
-	or	B,T2,B
-	add	B,C,B
-
-!!!!!!!!Round 3
-
-	orn	B,D,T1			!=
-	sethi	%hi(0xf4292244),T2
-	xor	T1,C,T1
-	or	T2,%lo(0xf4292244),T2
-	add	T1,R0,T1		!=
-	!pre-LOADed	X(7),R7
-	add	T1,T2,T1
-	add	A,T1,A
-	sll	A,6,T2
-	srl	A,32-6,A		!=
-	or	A,T2,A
-	add	A,B,A
-
-	orn	A,C,T1
-	sethi	%hi(0x432aff97),T2	!=
-	xor	T1,B,T1
-	or	T2,%lo(0x432aff97),T2
-	LOAD	X(14),RX
-	add	T1,R7,T1		!=
-	add	T1,T2,T1
-	add	D,T1,D
-	sll	D,10,T2
-	srl	D,32-10,D		!=
-	or	D,T2,D
-	add	D,A,D
-
-	orn	D,B,T1
-	sethi	%hi(0xab9423a7),T2	!=
-	xor	T1,A,T1
-	or	T2,%lo(0xab9423a7),T2
-	add	T1,RX,T1
-	!pre-LOADed	X(5),R5
-	add	T1,T2,T1		!=
-	add	C,T1,C
-	sll	C,15,T2
-	srl	C,32-15,C
-	or	C,T2,C			!=
-	add	C,D,C
-
-	orn	C,A,T1
-	sethi	%hi(0xfc93a039),T2
-	xor	T1,D,T1			!=
-	or	T2,%lo(0xfc93a039),T2
-	add	T1,R5,T1
-	!pre-LOADed	X(12),R12
-	add	T1,T2,T1
-	add	B,T1,B			!=
-	sll	B,21,T2
-	srl	B,32-21,B
-	or	B,T2,B
-	add	B,C,B			!=
-
-	orn	B,D,T1
-	sethi	%hi(0x655b59c3),T2
-	xor	T1,C,T1
-	or	T2,%lo(0x655b59c3),T2	!=
-	add	T1,R12,T1
-	!pre-LOADed	X(3),R3
-	add	T1,T2,T1
-	add	A,T1,A
-	sll	A,6,T2			!=
-	srl	A,32-6,A
-	or	A,T2,A
-	add	A,B,A
-
-	orn	A,C,T1			!=
-	sethi	%hi(0x8f0ccc92),T2
-	xor	T1,B,T1
-	or	T2,%lo(0x8f0ccc92),T2
-	add	T1,R3,T1		!=
-	!pre-LOADed	X(10),R10
-	add	T1,T2,T1
-	add	D,T1,D
-	sll	D,10,T2
-	srl	D,32-10,D		!=
-	or	D,T2,D
-	add	D,A,D
-
-	orn	D,B,T1
-	sethi	%hi(0xffeff47d),T2	!=
-	xor	T1,A,T1
-	or	T2,%lo(0xffeff47d),T2
-	add	T1,R10,T1
-	!pre-LOADed	X(1),R1
-	add	T1,T2,T1		!=
-	add	C,T1,C
-	sll	C,15,T2
-	srl	C,32-15,C
-	or	C,T2,C			!=
-	add	C,D,C
-
-	orn	C,A,T1
-	sethi	%hi(0x85845dd1),T2
-	xor	T1,D,T1			!=
-	or	T2,%lo(0x85845dd1),T2
-	add	T1,R1,T1
-	!pre-LOADed	X(8),R8
-	add	T1,T2,T1
-	add	B,T1,B			!=
-	sll	B,21,T2
-	srl	B,32-21,B
-	or	B,T2,B
-	add	B,C,B			!=
-
-	orn	B,D,T1
-	sethi	%hi(0x6fa87e4f),T2
-	xor	T1,C,T1
-	or	T2,%lo(0x6fa87e4f),T2	!=
-	add	T1,R8,T1
-	LOAD	X(15),RX
-	add	T1,T2,T1
-	add	A,T1,A			!=
-	sll	A,6,T2
-	srl	A,32-6,A
-	or	A,T2,A
-	add	A,B,A			!=
-
-	orn	A,C,T1
-	sethi	%hi(0xfe2ce6e0),T2
-	xor	T1,B,T1
-	or	T2,%lo(0xfe2ce6e0),T2	!=
-	add	T1,RX,T1
-	!pre-LOADed	X(6),R6
-	add	T1,T2,T1
-	add	D,T1,D
-	sll	D,10,T2			!=
-	srl	D,32-10,D
-	or	D,T2,D
-	add	D,A,D
-
-	orn	D,B,T1			!=
-	sethi	%hi(0xa3014314),T2
-	xor	T1,A,T1
-	or	T2,%lo(0xa3014314),T2
-	add	T1,R6,T1		!=
-	!pre-LOADed	X(13),R13
-	add	T1,T2,T1
-	add	C,T1,C
-	sll	C,15,T2
-	srl	C,32-15,C		!=
-	or	C,T2,C
-	add	C,D,C
-
-	orn	C,A,T1
-	sethi	%hi(0x4e0811a1),T2	!=
-	xor	T1,D,T1
-	or	T2,%lo(0x4e0811a1),T2
-	!pre-LOADed	X(4),R4
-	 ld	 [Aptr],Aval
-	add	T1,R13,T1		!=
-	add	T1,T2,T1
-	add	B,T1,B
-	sll	B,21,T2
-	srl	B,32-21,B		!=
-	or	B,T2,B
-	add	B,C,B
-
-	orn	B,D,T1
-	sethi	%hi(0xf7537e82),T2	!=
-	xor	T1,C,T1
-	or	T2,%lo(0xf7537e82),T2
-	!pre-LOADed	X(11),R11
-	 ld	 [Dptr],Dval
-	add	T1,R4,T1		!=
-	add	T1,T2,T1
-	add	A,T1,A
-	sll	A,6,T2
-	srl	A,32-6,A		!=
-	or	A,T2,A
-	add	A,B,A
-
-	orn	A,C,T1
-	sethi	%hi(0xbd3af235),T2	!=
-	xor	T1,B,T1
-	or	T2,%lo(0xbd3af235),T2
-	!pre-LOADed	X(2),R2
-	 ld	 [Cptr],Cval
-	add	T1,R11,T1		!=
-	add	T1,T2,T1
-	add	D,T1,D
-	sll	D,10,T2
-	srl	D,32-10,D		!=
-	or	D,T2,D
-	add	D,A,D
-
-	orn	D,B,T1
-	sethi	%hi(0x2ad7d2bb),T2	!=
-	xor	T1,A,T1
-	or	T2,%lo(0x2ad7d2bb),T2
-	!pre-LOADed	X(9),R9
-	 ld	 [Bptr],Bval
-	add	T1,R2,T1		!=
-	 add	 Aval,A,Aval
-	add	T1,T2,T1
-	 st	 Aval,[Aptr]
-	add	C,T1,C			!=
-	sll	C,15,T2
-	 add	 Dval,D,Dval
-	srl	C,32-15,C
-	or	C,T2,C			!=
-	 st	 Dval,[Dptr]
-	add	C,D,C
-
-	orn	C,A,T1
-	sethi	%hi(0xeb86d391),T2	!=
-	xor	T1,D,T1
-	or	T2,%lo(0xeb86d391),T2
-	add	T1,R9,T1
-	!pre-LOADed	X(0),R0
-	 mov	 Aval,A			!=
-	add	T1,T2,T1
-	 mov	 Dval,D
-	add	B,T1,B
-	sll	B,21,T2			!=
-	 add	 Cval,C,Cval
-	srl	B,32-21,B
-	 st	 Cval,[Cptr]
-	or	B,T2,B			!=
-	add	B,C,B
-
-	deccc	%i2
-	mov	Cval,C
-	add	B,Bval,B		!=
-	inc	64,%i1
-	nop
-	st	B,[Bptr]
-	nop				!=
-
-#ifdef	OPENSSL_SYSNAME_ULTRASPARC
-	bg,a,pt	%icc,.Lmd5_block_loop
-#else
-	bg,a	.Lmd5_block_loop
-#endif
-	LOAD	X(0),R0
-
-#ifdef ASI_PRIMARY_LITTLE
-	wr	%g0,%o7,%asi
-#endif
-	ret
-	restore	%g0,0,%o0
-
-.type	md5_block,#function
-.size	md5_block,(.-md5_block)
diff --git a/crypto/openssl/crypto/md5/asm/md5-x86_64.pl b/crypto/openssl/crypto/md5/asm/md5-x86_64.pl
deleted file mode 100755
index c36a7febf7f6..000000000000
--- a/crypto/openssl/crypto/md5/asm/md5-x86_64.pl
+++ /dev/null
@@ -1,245 +0,0 @@
-#!/usr/bin/perl -w
-#
-# MD5 optimized for AMD64.
-#
-# Author: Marc Bevand <bevand_m (at) epita.fr>
-# Licence: I hereby disclaim the copyright on this code and place it
-# in the public domain.
-#
-
-use strict;
-
-my $code;
-
-# round1_step() does:
-#   dst = x + ((dst + F(x,y,z) + X[k] + T_i) <<< s)
-#   %r10d = X[k_next]
-#   %r11d = z' (copy of z for the next step)
-# Each round1_step() takes about 5.71 clocks (9 instructions, 1.58 IPC)
-sub round1_step
-{
-    my ($pos, $dst, $x, $y, $z, $k_next, $T_i, $s) = @_;
-    $code .= " mov	0*4(%rsi),	%r10d		/* (NEXT STEP) X[0] */\n" if ($pos == -1);
-    $code .= " mov	%edx,		%r11d		/* (NEXT STEP) z' = %edx */\n" if ($pos == -1);
-    $code .= <<EOF;
-	xor	$y,		%r11d		/* y ^ ... */
-	lea	$T_i($dst,%r10d),$dst		/* Const + dst + ... */
-	and	$x,		%r11d		/* x & ... */
-	xor	$z,		%r11d		/* z ^ ... */
-	mov	$k_next*4(%rsi),%r10d		/* (NEXT STEP) X[$k_next] */
-	add	%r11d,		$dst		/* dst += ... */
-	rol	\$$s,		$dst		/* dst <<< s */
-	mov	$y,		%r11d		/* (NEXT STEP) z' = $y */
-	add	$x,		$dst		/* dst += x */
-EOF
-}
-
-# round2_step() does:
-#   dst = x + ((dst + G(x,y,z) + X[k] + T_i) <<< s)
-#   %r10d = X[k_next]
-#   %r11d = y' (copy of y for the next step)
-# Each round2_step() takes about 6.22 clocks (9 instructions, 1.45 IPC)
-sub round2_step
-{
-    my ($pos, $dst, $x, $y, $z, $k_next, $T_i, $s) = @_;
-    $code .= " mov	1*4(%rsi),	%r10d		/* (NEXT STEP) X[1] */\n" if ($pos == -1);
-    $code .= " mov	%ecx,		%r11d		/* (NEXT STEP) y' = %ecx */\n" if ($pos == -1);
-    $code .= <<EOF;
-	xor	$x,		%r11d		/* x ^ ... */
-	lea	$T_i($dst,%r10d),$dst		/* Const + dst + ... */
-	and	$z,		%r11d		/* z & ... */
-	xor	$y,		%r11d		/* y ^ ... */
-	mov	$k_next*4(%rsi),%r10d		/* (NEXT STEP) X[$k_next] */
-	add	%r11d,		$dst		/* dst += ... */
-	rol	\$$s,		$dst		/* dst <<< s */
-	mov	$x,		%r11d		/* (NEXT STEP) y' = $x */
-	add	$x,		$dst		/* dst += x */
-EOF
-}
-
-# round3_step() does:
-#   dst = x + ((dst + H(x,y,z) + X[k] + T_i) <<< s)
-#   %r10d = X[k_next]
-#   %r11d = y' (copy of y for the next step)
-# Each round3_step() takes about 4.26 clocks (8 instructions, 1.88 IPC)
-sub round3_step
-{
-    my ($pos, $dst, $x, $y, $z, $k_next, $T_i, $s) = @_;
-    $code .= " mov	5*4(%rsi),	%r10d		/* (NEXT STEP) X[5] */\n" if ($pos == -1);
-    $code .= " mov	%ecx,		%r11d		/* (NEXT STEP) y' = %ecx */\n" if ($pos == -1);
-    $code .= <<EOF;
-	lea	$T_i($dst,%r10d),$dst		/* Const + dst + ... */
-	mov	$k_next*4(%rsi),%r10d		/* (NEXT STEP) X[$k_next] */
-	xor	$z,		%r11d		/* z ^ ... */
-	xor	$x,		%r11d		/* x ^ ... */
-	add	%r11d,		$dst		/* dst += ... */
-	rol	\$$s,		$dst		/* dst <<< s */
-	mov	$x,		%r11d		/* (NEXT STEP) y' = $x */
-	add	$x,		$dst		/* dst += x */
-EOF
-}
-
-# round4_step() does:
-#   dst = x + ((dst + I(x,y,z) + X[k] + T_i) <<< s)
-#   %r10d = X[k_next]
-#   %r11d = not z' (copy of not z for the next step)
-# Each round4_step() takes about 5.27 clocks (9 instructions, 1.71 IPC)
-sub round4_step
-{
-    my ($pos, $dst, $x, $y, $z, $k_next, $T_i, $s) = @_;
-    $code .= " mov	0*4(%rsi),	%r10d		/* (NEXT STEP) X[0] */\n" if ($pos == -1);
-    $code .= " mov	\$0xffffffff,	%r11d\n" if ($pos == -1);
-    $code .= " xor	%edx,		%r11d		/* (NEXT STEP) not z' = not %edx*/\n"
-    if ($pos == -1);
-    $code .= <<EOF;
-	lea	$T_i($dst,%r10d),$dst		/* Const + dst + ... */
-	or	$x,		%r11d		/* x | ... */
-	xor	$y,		%r11d		/* y ^ ... */
-	add	%r11d,		$dst		/* dst += ... */
-	mov	$k_next*4(%rsi),%r10d		/* (NEXT STEP) X[$k_next] */
-	mov	\$0xffffffff,	%r11d
-	rol	\$$s,		$dst		/* dst <<< s */
-	xor	$y,		%r11d		/* (NEXT STEP) not z' = not $y */
-	add	$x,		$dst		/* dst += x */
-EOF
-}
-
-my $output = shift;
-open STDOUT,"| $^X ../perlasm/x86_64-xlate.pl $output";
-
-$code .= <<EOF;
-.text
-.align 16
-
-.globl md5_block_asm_host_order
-.type md5_block_asm_host_order,\@function,3
-md5_block_asm_host_order:
-	push	%rbp
-	push	%rbx
-	push	%r14
-	push	%r15
-
-	# rdi = arg #1 (ctx, MD5_CTX pointer)
-	# rsi = arg #2 (ptr, data pointer)
-	# rdx = arg #3 (nbr, number of 16-word blocks to process)
-	mov	%rdi,		%rbp	# rbp = ctx
-	shl	\$6,		%rdx	# rdx = nbr in bytes
-	lea	(%rsi,%rdx),	%rdi	# rdi = end
-	mov	0*4(%rbp),	%eax	# eax = ctx->A
-	mov	1*4(%rbp),	%ebx	# ebx = ctx->B
-	mov	2*4(%rbp),	%ecx	# ecx = ctx->C
-	mov	3*4(%rbp),	%edx	# edx = ctx->D
-	# end is 'rdi'
-	# ptr is 'rsi'
-	# A is 'eax'
-	# B is 'ebx'
-	# C is 'ecx'
-	# D is 'edx'
-
-	cmp	%rdi,		%rsi		# cmp end with ptr
-	je	.Lend				# jmp if ptr == end
-
-	# BEGIN of loop over 16-word blocks
-.Lloop:	# save old values of A, B, C, D
-	mov	%eax,		%r8d
-	mov	%ebx,		%r9d
-	mov	%ecx,		%r14d
-	mov	%edx,		%r15d
-EOF
-round1_step(-1,'%eax','%ebx','%ecx','%edx', '1','0xd76aa478', '7');
-round1_step( 0,'%edx','%eax','%ebx','%ecx', '2','0xe8c7b756','12');
-round1_step( 0,'%ecx','%edx','%eax','%ebx', '3','0x242070db','17');
-round1_step( 0,'%ebx','%ecx','%edx','%eax', '4','0xc1bdceee','22');
-round1_step( 0,'%eax','%ebx','%ecx','%edx', '5','0xf57c0faf', '7');
-round1_step( 0,'%edx','%eax','%ebx','%ecx', '6','0x4787c62a','12');
-round1_step( 0,'%ecx','%edx','%eax','%ebx', '7','0xa8304613','17');
-round1_step( 0,'%ebx','%ecx','%edx','%eax', '8','0xfd469501','22');
-round1_step( 0,'%eax','%ebx','%ecx','%edx', '9','0x698098d8', '7');
-round1_step( 0,'%edx','%eax','%ebx','%ecx','10','0x8b44f7af','12');
-round1_step( 0,'%ecx','%edx','%eax','%ebx','11','0xffff5bb1','17');
-round1_step( 0,'%ebx','%ecx','%edx','%eax','12','0x895cd7be','22');
-round1_step( 0,'%eax','%ebx','%ecx','%edx','13','0x6b901122', '7');
-round1_step( 0,'%edx','%eax','%ebx','%ecx','14','0xfd987193','12');
-round1_step( 0,'%ecx','%edx','%eax','%ebx','15','0xa679438e','17');
-round1_step( 1,'%ebx','%ecx','%edx','%eax', '0','0x49b40821','22');
-
-round2_step(-1,'%eax','%ebx','%ecx','%edx', '6','0xf61e2562', '5');
-round2_step( 0,'%edx','%eax','%ebx','%ecx','11','0xc040b340', '9');
-round2_step( 0,'%ecx','%edx','%eax','%ebx', '0','0x265e5a51','14');
-round2_step( 0,'%ebx','%ecx','%edx','%eax', '5','0xe9b6c7aa','20');
-round2_step( 0,'%eax','%ebx','%ecx','%edx','10','0xd62f105d', '5');
-round2_step( 0,'%edx','%eax','%ebx','%ecx','15', '0x2441453', '9');
-round2_step( 0,'%ecx','%edx','%eax','%ebx', '4','0xd8a1e681','14');
-round2_step( 0,'%ebx','%ecx','%edx','%eax', '9','0xe7d3fbc8','20');
-round2_step( 0,'%eax','%ebx','%ecx','%edx','14','0x21e1cde6', '5');
-round2_step( 0,'%edx','%eax','%ebx','%ecx', '3','0xc33707d6', '9');
-round2_step( 0,'%ecx','%edx','%eax','%ebx', '8','0xf4d50d87','14');
-round2_step( 0,'%ebx','%ecx','%edx','%eax','13','0x455a14ed','20');
-round2_step( 0,'%eax','%ebx','%ecx','%edx', '2','0xa9e3e905', '5');
-round2_step( 0,'%edx','%eax','%ebx','%ecx', '7','0xfcefa3f8', '9');
-round2_step( 0,'%ecx','%edx','%eax','%ebx','12','0x676f02d9','14');
-round2_step( 1,'%ebx','%ecx','%edx','%eax', '0','0x8d2a4c8a','20');
-
-round3_step(-1,'%eax','%ebx','%ecx','%edx', '8','0xfffa3942', '4');
-round3_step( 0,'%edx','%eax','%ebx','%ecx','11','0x8771f681','11');
-round3_step( 0,'%ecx','%edx','%eax','%ebx','14','0x6d9d6122','16');
-round3_step( 0,'%ebx','%ecx','%edx','%eax', '1','0xfde5380c','23');
-round3_step( 0,'%eax','%ebx','%ecx','%edx', '4','0xa4beea44', '4');
-round3_step( 0,'%edx','%eax','%ebx','%ecx', '7','0x4bdecfa9','11');
-round3_step( 0,'%ecx','%edx','%eax','%ebx','10','0xf6bb4b60','16');
-round3_step( 0,'%ebx','%ecx','%edx','%eax','13','0xbebfbc70','23');
-round3_step( 0,'%eax','%ebx','%ecx','%edx', '0','0x289b7ec6', '4');
-round3_step( 0,'%edx','%eax','%ebx','%ecx', '3','0xeaa127fa','11');
-round3_step( 0,'%ecx','%edx','%eax','%ebx', '6','0xd4ef3085','16');
-round3_step( 0,'%ebx','%ecx','%edx','%eax', '9', '0x4881d05','23');
-round3_step( 0,'%eax','%ebx','%ecx','%edx','12','0xd9d4d039', '4');
-round3_step( 0,'%edx','%eax','%ebx','%ecx','15','0xe6db99e5','11');
-round3_step( 0,'%ecx','%edx','%eax','%ebx', '2','0x1fa27cf8','16');
-round3_step( 1,'%ebx','%ecx','%edx','%eax', '0','0xc4ac5665','23');
-
-round4_step(-1,'%eax','%ebx','%ecx','%edx', '7','0xf4292244', '6');
-round4_step( 0,'%edx','%eax','%ebx','%ecx','14','0x432aff97','10');
-round4_step( 0,'%ecx','%edx','%eax','%ebx', '5','0xab9423a7','15');
-round4_step( 0,'%ebx','%ecx','%edx','%eax','12','0xfc93a039','21');
-round4_step( 0,'%eax','%ebx','%ecx','%edx', '3','0x655b59c3', '6');
-round4_step( 0,'%edx','%eax','%ebx','%ecx','10','0x8f0ccc92','10');
-round4_step( 0,'%ecx','%edx','%eax','%ebx', '1','0xffeff47d','15');
-round4_step( 0,'%ebx','%ecx','%edx','%eax', '8','0x85845dd1','21');
-round4_step( 0,'%eax','%ebx','%ecx','%edx','15','0x6fa87e4f', '6');
-round4_step( 0,'%edx','%eax','%ebx','%ecx', '6','0xfe2ce6e0','10');
-round4_step( 0,'%ecx','%edx','%eax','%ebx','13','0xa3014314','15');
-round4_step( 0,'%ebx','%ecx','%edx','%eax', '4','0x4e0811a1','21');
-round4_step( 0,'%eax','%ebx','%ecx','%edx','11','0xf7537e82', '6');
-round4_step( 0,'%edx','%eax','%ebx','%ecx', '2','0xbd3af235','10');
-round4_step( 0,'%ecx','%edx','%eax','%ebx', '9','0x2ad7d2bb','15');
-round4_step( 1,'%ebx','%ecx','%edx','%eax', '0','0xeb86d391','21');
-$code .= <<EOF;
-	# add old values of A, B, C, D
-	add	%r8d,	%eax
-	add	%r9d,	%ebx
-	add	%r14d,	%ecx
-	add	%r15d,	%edx
-
-	# loop control
-	add	\$64,		%rsi		# ptr += 64
-	cmp	%rdi,		%rsi		# cmp end with ptr
-	jb	.Lloop				# jmp if ptr < end
-	# END of loop over 16-word blocks
-
-.Lend:
-	mov	%eax,		0*4(%rbp)	# ctx->A = A
-	mov	%ebx,		1*4(%rbp)	# ctx->B = B
-	mov	%ecx,		2*4(%rbp)	# ctx->C = C
-	mov	%edx,		3*4(%rbp)	# ctx->D = D
-
-	pop	%r15
-	pop	%r14
-	pop	%rbx
-	pop	%rbp
-	ret
-.size md5_block_asm_host_order,.-md5_block_asm_host_order
-EOF
-
-print $code;
-
-close STDOUT;
diff --git a/crypto/openssl/crypto/md5/md5.c b/crypto/openssl/crypto/md5/md5.c
deleted file mode 100644
index 563733abc506..000000000000
--- a/crypto/openssl/crypto/md5/md5.c
+++ /dev/null
@@ -1,127 +0,0 @@
-/* crypto/md5/md5.c */
-/* Copyright (C) 1995-1998 Eric Young (eay@cryptsoft.com)
- * All rights reserved.
- *
- * This package is an SSL implementation written
- * by Eric Young (eay@cryptsoft.com).
- * The implementation was written so as to conform with Netscapes SSL.
- * 
- * This library is free for commercial and non-commercial use as long as
- * the following conditions are aheared to.  The following conditions
- * apply to all code found in this distribution, be it the RC4, RSA,
- * lhash, DES, etc., code; not just the SSL code.  The SSL documentation
- * included with this distribution is covered by the same copyright terms
- * except that the holder is Tim Hudson (tjh@cryptsoft.com).
- * 
- * Copyright remains Eric Young's, and as such any Copyright notices in
- * the code are not to be removed.
- * If this package is used in a product, Eric Young should be given attribution
- * as the author of the parts of the library used.
- * This can be in the form of a textual message at program startup or
- * in documentation (online or textual) provided with the package.
- * 
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions
- * are met:
- * 1. Redistributions of source code must retain the copyright
- *    notice, this list of conditions and the following disclaimer.
- * 2. Redistributions in binary form must reproduce the above copyright
- *    notice, this list of conditions and the following disclaimer in the
- *    documentation and/or other materials provided with the distribution.
- * 3. All advertising materials mentioning features or use of this software
- *    must display the following acknowledgement:
- *    "This product includes cryptographic software written by
- *     Eric Young (eay@cryptsoft.com)"
- *    The word 'cryptographic' can be left out if the rouines from the library
- *    being used are not cryptographic related :-).
- * 4. If you include any Windows specific code (or a derivative thereof) from 
- *    the apps directory (application code) you must include an acknowledgement:
- *    "This product includes software written by Tim Hudson (tjh@cryptsoft.com)"
- * 
- * THIS SOFTWARE IS PROVIDED BY ERIC YOUNG ``AS IS'' AND
- * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
- * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
- * ARE DISCLAIMED.  IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE
- * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
- * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
- * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
- * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
- * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
- * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
- * SUCH DAMAGE.
- * 
- * The licence and distribution terms for any publically available version or
- * derivative of this code cannot be changed.  i.e. this code cannot simply be
- * copied and put under another distribution licence
- * [including the GNU Public Licence.]
- */
-
-#include <stdio.h>
-#include <stdlib.h>
-#include <openssl/md5.h>
-
-#define BUFSIZE	1024*16
-
-void do_fp(FILE *f);
-void pt(unsigned char *md);
-#if !defined(_OSD_POSIX) && !defined(__DJGPP__)
-int read(int, void *, unsigned int);
-#endif
-
-int main(int argc, char **argv)
-	{
-	int i,err=0;
-	FILE *IN;
-
-	if (argc == 1)
-		{
-		do_fp(stdin);
-		}
-	else
-		{
-		for (i=1; i<argc; i++)
-			{
-			IN=fopen(argv[i],"r");
-			if (IN == NULL)
-				{
-				perror(argv[i]);
-				err++;
-				continue;
-				}
-			printf("MD5(%s)= ",argv[i]);
-			do_fp(IN);
-			fclose(IN);
-			}
-		}
-	exit(err);
-	}
-
-void do_fp(FILE *f)
-	{
-	MD5_CTX c;
-	unsigned char md[MD5_DIGEST_LENGTH];
-	int fd;
-	int i;
-	static unsigned char buf[BUFSIZE];
-
-	fd=fileno(f);
-	MD5_Init(&c);
-	for (;;)
-		{
-		i=read(fd,buf,BUFSIZE);
-		if (i <= 0) break;
-		MD5_Update(&c,buf,(unsigned long)i);
-		}
-	MD5_Final(&(md[0]),&c);
-	pt(md);
-	}
-
-void pt(unsigned char *md)
-	{
-	int i;
-
-	for (i=0; i<MD5_DIGEST_LENGTH; i++)
-		printf("%02x",md[i]);
-	printf("\n");
-	}
-
diff --git a/crypto/openssl/crypto/md5/md5.h b/crypto/openssl/crypto/md5/md5.h
deleted file mode 100644
index dbdc0e1abc7e..000000000000
--- a/crypto/openssl/crypto/md5/md5.h
+++ /dev/null
@@ -1,117 +0,0 @@
-/* crypto/md5/md5.h */
-/* Copyright (C) 1995-1998 Eric Young (eay@cryptsoft.com)
- * All rights reserved.
- *
- * This package is an SSL implementation written
- * by Eric Young (eay@cryptsoft.com).
- * The implementation was written so as to conform with Netscapes SSL.
- * 
- * This library is free for commercial and non-commercial use as long as
- * the following conditions are aheared to.  The following conditions
- * apply to all code found in this distribution, be it the RC4, RSA,
- * lhash, DES, etc., code; not just the SSL code.  The SSL documentation
- * included with this distribution is covered by the same copyright terms
- * except that the holder is Tim Hudson (tjh@cryptsoft.com).
- * 
- * Copyright remains Eric Young's, and as such any Copyright notices in
- * the code are not to be removed.
- * If this package is used in a product, Eric Young should be given attribution
- * as the author of the parts of the library used.
- * This can be in the form of a textual message at program startup or
- * in documentation (online or textual) provided with the package.
- * 
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions
- * are met:
- * 1. Redistributions of source code must retain the copyright
- *    notice, this list of conditions and the following disclaimer.
- * 2. Redistributions in binary form must reproduce the above copyright
- *    notice, this list of conditions and the following disclaimer in the
- *    documentation and/or other materials provided with the distribution.
- * 3. All advertising materials mentioning features or use of this software
- *    must display the following acknowledgement:
- *    "This product includes cryptographic software written by
- *     Eric Young (eay@cryptsoft.com)"
- *    The word 'cryptographic' can be left out if the rouines from the library
- *    being used are not cryptographic related :-).
- * 4. If you include any Windows specific code (or a derivative thereof) from 
- *    the apps directory (application code) you must include an acknowledgement:
- *    "This product includes software written by Tim Hudson (tjh@cryptsoft.com)"
- * 
- * THIS SOFTWARE IS PROVIDED BY ERIC YOUNG ``AS IS'' AND
- * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
- * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
- * ARE DISCLAIMED.  IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE
- * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
- * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
- * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
- * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
- * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
- * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
- * SUCH DAMAGE.
- * 
- * The licence and distribution terms for any publically available version or
- * derivative of this code cannot be changed.  i.e. this code cannot simply be
- * copied and put under another distribution licence
- * [including the GNU Public Licence.]
- */
-
-#ifndef HEADER_MD5_H
-#define HEADER_MD5_H
-
-#include <openssl/e_os2.h>
-#include <stddef.h>
-
-#ifdef  __cplusplus
-extern "C" {
-#endif
-
-#ifdef OPENSSL_NO_MD5
-#error MD5 is disabled.
-#endif
-
-/*
- * !!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
- * ! MD5_LONG has to be at least 32 bits wide. If it's wider, then !
- * ! MD5_LONG_LOG2 has to be defined along.			   !
- * !!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
- */
-
-#if defined(OPENSSL_SYS_WIN16) || defined(__LP32__)
-#define MD5_LONG unsigned long
-#elif defined(OPENSSL_SYS_CRAY) || defined(__ILP64__)
-#define MD5_LONG unsigned long
-#define MD5_LONG_LOG2 3
-/*
- * _CRAY note. I could declare short, but I have no idea what impact
- * does it have on performance on none-T3E machines. I could declare
- * int, but at least on C90 sizeof(int) can be chosen at compile time.
- * So I've chosen long...
- *					<appro@fy.chalmers.se>
- */
-#else
-#define MD5_LONG unsigned int
-#endif
-
-#define MD5_CBLOCK	64
-#define MD5_LBLOCK	(MD5_CBLOCK/4)
-#define MD5_DIGEST_LENGTH 16
-
-typedef struct MD5state_st
-	{
-	MD5_LONG A,B,C,D;
-	MD5_LONG Nl,Nh;
-	MD5_LONG data[MD5_LBLOCK];
-	unsigned int num;
-	} MD5_CTX;
-
-int MD5_Init(MD5_CTX *c);
-int MD5_Update(MD5_CTX *c, const void *data, size_t len);
-int MD5_Final(unsigned char *md, MD5_CTX *c);
-unsigned char *MD5(const unsigned char *d, size_t n, unsigned char *md);
-void MD5_Transform(MD5_CTX *c, const unsigned char *b);
-#ifdef  __cplusplus
-}
-#endif
-
-#endif
diff --git a/crypto/openssl/crypto/md5/md5_dgst.c b/crypto/openssl/crypto/md5/md5_dgst.c
deleted file mode 100644
index 953f0496f69c..000000000000
--- a/crypto/openssl/crypto/md5/md5_dgst.c
+++ /dev/null
@@ -1,292 +0,0 @@
-/* crypto/md5/md5_dgst.c */
-/* Copyright (C) 1995-1998 Eric Young (eay@cryptsoft.com)
- * All rights reserved.
- *
- * This package is an SSL implementation written
- * by Eric Young (eay@cryptsoft.com).
- * The implementation was written so as to conform with Netscapes SSL.
- * 
- * This library is free for commercial and non-commercial use as long as
- * the following conditions are aheared to.  The following conditions
- * apply to all code found in this distribution, be it the RC4, RSA,
- * lhash, DES, etc., code; not just the SSL code.  The SSL documentation
- * included with this distribution is covered by the same copyright terms
- * except that the holder is Tim Hudson (tjh@cryptsoft.com).
- * 
- * Copyright remains Eric Young's, and as such any Copyright notices in
- * the code are not to be removed.
- * If this package is used in a product, Eric Young should be given attribution
- * as the author of the parts of the library used.
- * This can be in the form of a textual message at program startup or
- * in documentation (online or textual) provided with the package.
- * 
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions
- * are met:
- * 1. Redistributions of source code must retain the copyright
- *    notice, this list of conditions and the following disclaimer.
- * 2. Redistributions in binary form must reproduce the above copyright
- *    notice, this list of conditions and the following disclaimer in the
- *    documentation and/or other materials provided with the distribution.
- * 3. All advertising materials mentioning features or use of this software
- *    must display the following acknowledgement:
- *    "This product includes cryptographic software written by
- *     Eric Young (eay@cryptsoft.com)"
- *    The word 'cryptographic' can be left out if the rouines from the library
- *    being used are not cryptographic related :-).
- * 4. If you include any Windows specific code (or a derivative thereof) from 
- *    the apps directory (application code) you must include an acknowledgement:
- *    "This product includes software written by Tim Hudson (tjh@cryptsoft.com)"
- * 
- * THIS SOFTWARE IS PROVIDED BY ERIC YOUNG ``AS IS'' AND
- * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
- * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
- * ARE DISCLAIMED.  IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE
- * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
- * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
- * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
- * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
- * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
- * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
- * SUCH DAMAGE.
- * 
- * The licence and distribution terms for any publically available version or
- * derivative of this code cannot be changed.  i.e. this code cannot simply be
- * copied and put under another distribution licence
- * [including the GNU Public Licence.]
- */
-
-#include <stdio.h>
-#include "md5_locl.h"
-#include <openssl/opensslv.h>
-
-const char MD5_version[]="MD5" OPENSSL_VERSION_PTEXT;
-
-/* Implemented from RFC1321 The MD5 Message-Digest Algorithm
- */
-
-#define INIT_DATA_A (unsigned long)0x67452301L
-#define INIT_DATA_B (unsigned long)0xefcdab89L
-#define INIT_DATA_C (unsigned long)0x98badcfeL
-#define INIT_DATA_D (unsigned long)0x10325476L
-
-int MD5_Init(MD5_CTX *c)
-	{
-	c->A=INIT_DATA_A;
-	c->B=INIT_DATA_B;
-	c->C=INIT_DATA_C;
-	c->D=INIT_DATA_D;
-	c->Nl=0;
-	c->Nh=0;
-	c->num=0;
-	return 1;
-	}
-
-#ifndef md5_block_host_order
-void md5_block_host_order (MD5_CTX *c, const void *data, size_t num)
-	{
-	const MD5_LONG *X=data;
-	register unsigned MD32_REG_T A,B,C,D;
-
-	A=c->A;
-	B=c->B;
-	C=c->C;
-	D=c->D;
-
-	for (;num--;X+=HASH_LBLOCK)
-		{
-	/* Round 0 */
-	R0(A,B,C,D,X[ 0], 7,0xd76aa478L);
-	R0(D,A,B,C,X[ 1],12,0xe8c7b756L);
-	R0(C,D,A,B,X[ 2],17,0x242070dbL);
-	R0(B,C,D,A,X[ 3],22,0xc1bdceeeL);
-	R0(A,B,C,D,X[ 4], 7,0xf57c0fafL);
-	R0(D,A,B,C,X[ 5],12,0x4787c62aL);
-	R0(C,D,A,B,X[ 6],17,0xa8304613L);
-	R0(B,C,D,A,X[ 7],22,0xfd469501L);
-	R0(A,B,C,D,X[ 8], 7,0x698098d8L);
-	R0(D,A,B,C,X[ 9],12,0x8b44f7afL);
-	R0(C,D,A,B,X[10],17,0xffff5bb1L);
-	R0(B,C,D,A,X[11],22,0x895cd7beL);
-	R0(A,B,C,D,X[12], 7,0x6b901122L);
-	R0(D,A,B,C,X[13],12,0xfd987193L);
-	R0(C,D,A,B,X[14],17,0xa679438eL);
-	R0(B,C,D,A,X[15],22,0x49b40821L);
-	/* Round 1 */
-	R1(A,B,C,D,X[ 1], 5,0xf61e2562L);
-	R1(D,A,B,C,X[ 6], 9,0xc040b340L);
-	R1(C,D,A,B,X[11],14,0x265e5a51L);
-	R1(B,C,D,A,X[ 0],20,0xe9b6c7aaL);
-	R1(A,B,C,D,X[ 5], 5,0xd62f105dL);
-	R1(D,A,B,C,X[10], 9,0x02441453L);
-	R1(C,D,A,B,X[15],14,0xd8a1e681L);
-	R1(B,C,D,A,X[ 4],20,0xe7d3fbc8L);
-	R1(A,B,C,D,X[ 9], 5,0x21e1cde6L);
-	R1(D,A,B,C,X[14], 9,0xc33707d6L);
-	R1(C,D,A,B,X[ 3],14,0xf4d50d87L);
-	R1(B,C,D,A,X[ 8],20,0x455a14edL);
-	R1(A,B,C,D,X[13], 5,0xa9e3e905L);
-	R1(D,A,B,C,X[ 2], 9,0xfcefa3f8L);
-	R1(C,D,A,B,X[ 7],14,0x676f02d9L);
-	R1(B,C,D,A,X[12],20,0x8d2a4c8aL);
-	/* Round 2 */
-	R2(A,B,C,D,X[ 5], 4,0xfffa3942L);
-	R2(D,A,B,C,X[ 8],11,0x8771f681L);
-	R2(C,D,A,B,X[11],16,0x6d9d6122L);
-	R2(B,C,D,A,X[14],23,0xfde5380cL);
-	R2(A,B,C,D,X[ 1], 4,0xa4beea44L);
-	R2(D,A,B,C,X[ 4],11,0x4bdecfa9L);
-	R2(C,D,A,B,X[ 7],16,0xf6bb4b60L);
-	R2(B,C,D,A,X[10],23,0xbebfbc70L);
-	R2(A,B,C,D,X[13], 4,0x289b7ec6L);
-	R2(D,A,B,C,X[ 0],11,0xeaa127faL);
-	R2(C,D,A,B,X[ 3],16,0xd4ef3085L);
-	R2(B,C,D,A,X[ 6],23,0x04881d05L);
-	R2(A,B,C,D,X[ 9], 4,0xd9d4d039L);
-	R2(D,A,B,C,X[12],11,0xe6db99e5L);
-	R2(C,D,A,B,X[15],16,0x1fa27cf8L);
-	R2(B,C,D,A,X[ 2],23,0xc4ac5665L);
-	/* Round 3 */
-	R3(A,B,C,D,X[ 0], 6,0xf4292244L);
-	R3(D,A,B,C,X[ 7],10,0x432aff97L);
-	R3(C,D,A,B,X[14],15,0xab9423a7L);
-	R3(B,C,D,A,X[ 5],21,0xfc93a039L);
-	R3(A,B,C,D,X[12], 6,0x655b59c3L);
-	R3(D,A,B,C,X[ 3],10,0x8f0ccc92L);
-	R3(C,D,A,B,X[10],15,0xffeff47dL);
-	R3(B,C,D,A,X[ 1],21,0x85845dd1L);
-	R3(A,B,C,D,X[ 8], 6,0x6fa87e4fL);
-	R3(D,A,B,C,X[15],10,0xfe2ce6e0L);
-	R3(C,D,A,B,X[ 6],15,0xa3014314L);
-	R3(B,C,D,A,X[13],21,0x4e0811a1L);
-	R3(A,B,C,D,X[ 4], 6,0xf7537e82L);
-	R3(D,A,B,C,X[11],10,0xbd3af235L);
-	R3(C,D,A,B,X[ 2],15,0x2ad7d2bbL);
-	R3(B,C,D,A,X[ 9],21,0xeb86d391L);
-
-	A = c->A += A;
-	B = c->B += B;
-	C = c->C += C;
-	D = c->D += D;
-		}
-	}
-#endif
-
-#ifndef md5_block_data_order
-#ifdef X
-#undef X
-#endif
-void md5_block_data_order (MD5_CTX *c, const void *data_, size_t num)
-	{
-	const unsigned char *data=data_;
-	register unsigned MD32_REG_T A,B,C,D,l;
-#ifndef MD32_XARRAY
-	/* See comment in crypto/sha/sha_locl.h for details. */
-	unsigned MD32_REG_T	XX0, XX1, XX2, XX3, XX4, XX5, XX6, XX7,
-				XX8, XX9,XX10,XX11,XX12,XX13,XX14,XX15;
-# define X(i)	XX##i
-#else
-	MD5_LONG XX[MD5_LBLOCK];
-# define X(i)	XX[i]
-#endif
-
-	A=c->A;
-	B=c->B;
-	C=c->C;
-	D=c->D;
-
-	for (;num--;)
-		{
-	HOST_c2l(data,l); X( 0)=l;		HOST_c2l(data,l); X( 1)=l;
-	/* Round 0 */
-	R0(A,B,C,D,X( 0), 7,0xd76aa478L);	HOST_c2l(data,l); X( 2)=l;
-	R0(D,A,B,C,X( 1),12,0xe8c7b756L);	HOST_c2l(data,l); X( 3)=l;
-	R0(C,D,A,B,X( 2),17,0x242070dbL);	HOST_c2l(data,l); X( 4)=l;
-	R0(B,C,D,A,X( 3),22,0xc1bdceeeL);	HOST_c2l(data,l); X( 5)=l;
-	R0(A,B,C,D,X( 4), 7,0xf57c0fafL);	HOST_c2l(data,l); X( 6)=l;
-	R0(D,A,B,C,X( 5),12,0x4787c62aL);	HOST_c2l(data,l); X( 7)=l;
-	R0(C,D,A,B,X( 6),17,0xa8304613L);	HOST_c2l(data,l); X( 8)=l;
-	R0(B,C,D,A,X( 7),22,0xfd469501L);	HOST_c2l(data,l); X( 9)=l;
-	R0(A,B,C,D,X( 8), 7,0x698098d8L);	HOST_c2l(data,l); X(10)=l;
-	R0(D,A,B,C,X( 9),12,0x8b44f7afL);	HOST_c2l(data,l); X(11)=l;
-	R0(C,D,A,B,X(10),17,0xffff5bb1L);	HOST_c2l(data,l); X(12)=l;
-	R0(B,C,D,A,X(11),22,0x895cd7beL);	HOST_c2l(data,l); X(13)=l;
-	R0(A,B,C,D,X(12), 7,0x6b901122L);	HOST_c2l(data,l); X(14)=l;
-	R0(D,A,B,C,X(13),12,0xfd987193L);	HOST_c2l(data,l); X(15)=l;
-	R0(C,D,A,B,X(14),17,0xa679438eL);
-	R0(B,C,D,A,X(15),22,0x49b40821L);
-	/* Round 1 */
-	R1(A,B,C,D,X( 1), 5,0xf61e2562L);
-	R1(D,A,B,C,X( 6), 9,0xc040b340L);
-	R1(C,D,A,B,X(11),14,0x265e5a51L);
-	R1(B,C,D,A,X( 0),20,0xe9b6c7aaL);
-	R1(A,B,C,D,X( 5), 5,0xd62f105dL);
-	R1(D,A,B,C,X(10), 9,0x02441453L);
-	R1(C,D,A,B,X(15),14,0xd8a1e681L);
-	R1(B,C,D,A,X( 4),20,0xe7d3fbc8L);
-	R1(A,B,C,D,X( 9), 5,0x21e1cde6L);
-	R1(D,A,B,C,X(14), 9,0xc33707d6L);
-	R1(C,D,A,B,X( 3),14,0xf4d50d87L);
-	R1(B,C,D,A,X( 8),20,0x455a14edL);
-	R1(A,B,C,D,X(13), 5,0xa9e3e905L);
-	R1(D,A,B,C,X( 2), 9,0xfcefa3f8L);
-	R1(C,D,A,B,X( 7),14,0x676f02d9L);
-	R1(B,C,D,A,X(12),20,0x8d2a4c8aL);
-	/* Round 2 */
-	R2(A,B,C,D,X( 5), 4,0xfffa3942L);
-	R2(D,A,B,C,X( 8),11,0x8771f681L);
-	R2(C,D,A,B,X(11),16,0x6d9d6122L);
-	R2(B,C,D,A,X(14),23,0xfde5380cL);
-	R2(A,B,C,D,X( 1), 4,0xa4beea44L);
-	R2(D,A,B,C,X( 4),11,0x4bdecfa9L);
-	R2(C,D,A,B,X( 7),16,0xf6bb4b60L);
-	R2(B,C,D,A,X(10),23,0xbebfbc70L);
-	R2(A,B,C,D,X(13), 4,0x289b7ec6L);
-	R2(D,A,B,C,X( 0),11,0xeaa127faL);
-	R2(C,D,A,B,X( 3),16,0xd4ef3085L);
-	R2(B,C,D,A,X( 6),23,0x04881d05L);
-	R2(A,B,C,D,X( 9), 4,0xd9d4d039L);
-	R2(D,A,B,C,X(12),11,0xe6db99e5L);
-	R2(C,D,A,B,X(15),16,0x1fa27cf8L);
-	R2(B,C,D,A,X( 2),23,0xc4ac5665L);
-	/* Round 3 */
-	R3(A,B,C,D,X( 0), 6,0xf4292244L);
-	R3(D,A,B,C,X( 7),10,0x432aff97L);
-	R3(C,D,A,B,X(14),15,0xab9423a7L);
-	R3(B,C,D,A,X( 5),21,0xfc93a039L);
-	R3(A,B,C,D,X(12), 6,0x655b59c3L);
-	R3(D,A,B,C,X( 3),10,0x8f0ccc92L);
-	R3(C,D,A,B,X(10),15,0xffeff47dL);
-	R3(B,C,D,A,X( 1),21,0x85845dd1L);
-	R3(A,B,C,D,X( 8), 6,0x6fa87e4fL);
-	R3(D,A,B,C,X(15),10,0xfe2ce6e0L);
-	R3(C,D,A,B,X( 6),15,0xa3014314L);
-	R3(B,C,D,A,X(13),21,0x4e0811a1L);
-	R3(A,B,C,D,X( 4), 6,0xf7537e82L);
-	R3(D,A,B,C,X(11),10,0xbd3af235L);
-	R3(C,D,A,B,X( 2),15,0x2ad7d2bbL);
-	R3(B,C,D,A,X( 9),21,0xeb86d391L);
-
-	A = c->A += A;
-	B = c->B += B;
-	C = c->C += C;
-	D = c->D += D;
-		}
-	}
-#endif
-
-#ifdef undef
-int printit(unsigned long *l)
-	{
-	int i,ii;
-
-	for (i=0; i<2; i++)
-		{
-		for (ii=0; ii<8; ii++)
-			{
-			fprintf(stderr,"%08lx ",l[i*8+ii]);
-			}
-		fprintf(stderr,"\n");
-		}
-	}
-#endif
diff --git a/crypto/openssl/crypto/md5/md5_locl.h b/crypto/openssl/crypto/md5/md5_locl.h
deleted file mode 100644
index 94f395f27a24..000000000000
--- a/crypto/openssl/crypto/md5/md5_locl.h
+++ /dev/null
@@ -1,176 +0,0 @@
-/* crypto/md5/md5_locl.h */
-/* Copyright (C) 1995-1998 Eric Young (eay@cryptsoft.com)
- * All rights reserved.
- *
- * This package is an SSL implementation written
- * by Eric Young (eay@cryptsoft.com).
- * The implementation was written so as to conform with Netscapes SSL.
- * 
- * This library is free for commercial and non-commercial use as long as
- * the following conditions are aheared to.  The following conditions
- * apply to all code found in this distribution, be it the RC4, RSA,
- * lhash, DES, etc., code; not just the SSL code.  The SSL documentation
- * included with this distribution is covered by the same copyright terms
- * except that the holder is Tim Hudson (tjh@cryptsoft.com).
- * 
- * Copyright remains Eric Young's, and as such any Copyright notices in
- * the code are not to be removed.
- * If this package is used in a product, Eric Young should be given attribution
- * as the author of the parts of the library used.
- * This can be in the form of a textual message at program startup or
- * in documentation (online or textual) provided with the package.
- * 
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions
- * are met:
- * 1. Redistributions of source code must retain the copyright
- *    notice, this list of conditions and the following disclaimer.
- * 2. Redistributions in binary form must reproduce the above copyright
- *    notice, this list of conditions and the following disclaimer in the
- *    documentation and/or other materials provided with the distribution.
- * 3. All advertising materials mentioning features or use of this software
- *    must display the following acknowledgement:
- *    "This product includes cryptographic software written by
- *     Eric Young (eay@cryptsoft.com)"
- *    The word 'cryptographic' can be left out if the rouines from the library
- *    being used are not cryptographic related :-).
- * 4. If you include any Windows specific code (or a derivative thereof) from 
- *    the apps directory (application code) you must include an acknowledgement:
- *    "This product includes software written by Tim Hudson (tjh@cryptsoft.com)"
- * 
- * THIS SOFTWARE IS PROVIDED BY ERIC YOUNG ``AS IS'' AND
- * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
- * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
- * ARE DISCLAIMED.  IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE
- * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
- * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
- * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
- * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
- * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
- * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
- * SUCH DAMAGE.
- * 
- * The licence and distribution terms for any publically available version or
- * derivative of this code cannot be changed.  i.e. this code cannot simply be
- * copied and put under another distribution licence
- * [including the GNU Public Licence.]
- */
-
-#include <stdlib.h>
-#include <string.h>
-#include <openssl/e_os2.h>
-#include <openssl/md5.h>
-
-#ifndef MD5_LONG_LOG2
-#define MD5_LONG_LOG2 2 /* default to 32 bits */
-#endif
-
-#ifdef MD5_ASM
-# if defined(__i386) || defined(__i386__) || defined(_M_IX86) || defined(__INTEL__) || defined(__x86_64) || defined(__x86_64__)
-#  if !defined(B_ENDIAN)
-#   define md5_block_host_order md5_block_asm_host_order
-#  endif
-# elif defined(__sparc) && defined(OPENSSL_SYS_ULTRASPARC)
-   void md5_block_asm_data_order_aligned (MD5_CTX *c, const MD5_LONG *p,size_t num);
-#  define HASH_BLOCK_DATA_ORDER_ALIGNED md5_block_asm_data_order_aligned
-# endif
-#endif
-
-void md5_block_host_order (MD5_CTX *c, const void *p,size_t num);
-void md5_block_data_order (MD5_CTX *c, const void *p,size_t num);
-
-#if defined(__i386) || defined(__i386__) || defined(_M_IX86) || defined(__INTEL__) || defined(__x86_64) || defined(__x86_64__)
-# if !defined(B_ENDIAN)
-/*
- * *_block_host_order is expected to handle aligned data while
- * *_block_data_order - unaligned. As algorithm and host (x86)
- * are in this case of the same "endianness" these two are
- * otherwise indistinguishable. But normally you don't want to
- * call the same function because unaligned access in places
- * where alignment is expected is usually a "Bad Thing". Indeed,
- * on RISCs you get punished with BUS ERROR signal or *severe*
- * performance degradation. Intel CPUs are in turn perfectly
- * capable of loading unaligned data without such drastic side
- * effect. Yes, they say it's slower than aligned load, but no
- * exception is generated and therefore performance degradation
- * is *incomparable* with RISCs. What we should weight here is
- * costs of unaligned access against costs of aligning data.
- * According to my measurements allowing unaligned access results
- * in ~9% performance improvement on Pentium II operating at
- * 266MHz. I won't be surprised if the difference will be higher
- * on faster systems:-)
- *
- *				<appro@fy.chalmers.se>
- */
-# define md5_block_data_order md5_block_host_order
-# endif
-#endif
-
-#define DATA_ORDER_IS_LITTLE_ENDIAN
-
-#define HASH_LONG		MD5_LONG
-#define HASH_LONG_LOG2		MD5_LONG_LOG2
-#define HASH_CTX		MD5_CTX
-#define HASH_CBLOCK		MD5_CBLOCK
-#define HASH_LBLOCK		MD5_LBLOCK
-#define HASH_UPDATE		MD5_Update
-#define HASH_TRANSFORM		MD5_Transform
-#define HASH_FINAL		MD5_Final
-#define	HASH_MAKE_STRING(c,s)	do {	\
-	unsigned long ll;		\
-	ll=(c)->A; HOST_l2c(ll,(s));	\
-	ll=(c)->B; HOST_l2c(ll,(s));	\
-	ll=(c)->C; HOST_l2c(ll,(s));	\
-	ll=(c)->D; HOST_l2c(ll,(s));	\
-	} while (0)
-#define HASH_BLOCK_HOST_ORDER	md5_block_host_order
-#if !defined(L_ENDIAN) || defined(md5_block_data_order)
-#define	HASH_BLOCK_DATA_ORDER	md5_block_data_order
-/*
- * Little-endians (Intel and Alpha) feel better without this.
- * It looks like memcpy does better job than generic
- * md5_block_data_order on copying-n-aligning input data.
- * But frankly speaking I didn't expect such result on Alpha.
- * On the other hand I've got this with egcs-1.0.2 and if
- * program is compiled with another (better?) compiler it
- * might turn out other way around.
- *
- *				<appro@fy.chalmers.se>
- */
-#endif
-
-#include "md32_common.h"
-
-/*
-#define	F(x,y,z)	(((x) & (y))  |  ((~(x)) & (z)))
-#define	G(x,y,z)	(((x) & (z))  |  ((y) & (~(z))))
-*/
-
-/* As pointed out by Wei Dai <weidai@eskimo.com>, the above can be
- * simplified to the code below.  Wei attributes these optimizations
- * to Peter Gutmann's SHS code, and he attributes it to Rich Schroeppel.
- */
-#define	F(b,c,d)	((((c) ^ (d)) & (b)) ^ (d))
-#define	G(b,c,d)	((((b) ^ (c)) & (d)) ^ (c))
-#define	H(b,c,d)	((b) ^ (c) ^ (d))
-#define	I(b,c,d)	(((~(d)) | (b)) ^ (c))
-
-#define R0(a,b,c,d,k,s,t) { \
-	a+=((k)+(t)+F((b),(c),(d))); \
-	a=ROTATE(a,s); \
-	a+=b; };\
-
-#define R1(a,b,c,d,k,s,t) { \
-	a+=((k)+(t)+G((b),(c),(d))); \
-	a=ROTATE(a,s); \
-	a+=b; };
-
-#define R2(a,b,c,d,k,s,t) { \
-	a+=((k)+(t)+H((b),(c),(d))); \
-	a=ROTATE(a,s); \
-	a+=b; };
-
-#define R3(a,b,c,d,k,s,t) { \
-	a+=((k)+(t)+I((b),(c),(d))); \
-	a=ROTATE(a,s); \
-	a+=b; };
diff --git a/crypto/openssl/crypto/md5/md5_one.c b/crypto/openssl/crypto/md5/md5_one.c
deleted file mode 100644
index 43fee8937963..000000000000
--- a/crypto/openssl/crypto/md5/md5_one.c
+++ /dev/null
@@ -1,97 +0,0 @@
-/* crypto/md5/md5_one.c */
-/* Copyright (C) 1995-1998 Eric Young (eay@cryptsoft.com)
- * All rights reserved.
- *
- * This package is an SSL implementation written
- * by Eric Young (eay@cryptsoft.com).
- * The implementation was written so as to conform with Netscapes SSL.
- * 
- * This library is free for commercial and non-commercial use as long as
- * the following conditions are aheared to.  The following conditions
- * apply to all code found in this distribution, be it the RC4, RSA,
- * lhash, DES, etc., code; not just the SSL code.  The SSL documentation
- * included with this distribution is covered by the same copyright terms
- * except that the holder is Tim Hudson (tjh@cryptsoft.com).
- * 
- * Copyright remains Eric Young's, and as such any Copyright notices in
- * the code are not to be removed.
- * If this package is used in a product, Eric Young should be given attribution
- * as the author of the parts of the library used.
- * This can be in the form of a textual message at program startup or
- * in documentation (online or textual) provided with the package.
- * 
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions
- * are met:
- * 1. Redistributions of source code must retain the copyright
- *    notice, this list of conditions and the following disclaimer.
- * 2. Redistributions in binary form must reproduce the above copyright
- *    notice, this list of conditions and the following disclaimer in the
- *    documentation and/or other materials provided with the distribution.
- * 3. All advertising materials mentioning features or use of this software
- *    must display the following acknowledgement:
- *    "This product includes cryptographic software written by
- *     Eric Young (eay@cryptsoft.com)"
- *    The word 'cryptographic' can be left out if the rouines from the library
- *    being used are not cryptographic related :-).
- * 4. If you include any Windows specific code (or a derivative thereof) from 
- *    the apps directory (application code) you must include an acknowledgement:
- *    "This product includes software written by Tim Hudson (tjh@cryptsoft.com)"
- * 
- * THIS SOFTWARE IS PROVIDED BY ERIC YOUNG ``AS IS'' AND
- * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
- * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
- * ARE DISCLAIMED.  IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE
- * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
- * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
- * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
- * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
- * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
- * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
- * SUCH DAMAGE.
- * 
- * The licence and distribution terms for any publically available version or
- * derivative of this code cannot be changed.  i.e. this code cannot simply be
- * copied and put under another distribution licence
- * [including the GNU Public Licence.]
- */
-
-#include <stdio.h>
-#include <string.h>
-#include <openssl/md5.h>
-#include <openssl/crypto.h>
-
-#ifdef CHARSET_EBCDIC
-#include <openssl/ebcdic.h>
-#endif
-
-unsigned char *MD5(const unsigned char *d, size_t n, unsigned char *md)
-	{
-	MD5_CTX c;
-	static unsigned char m[MD5_DIGEST_LENGTH];
-
-	if (md == NULL) md=m;
-	if (!MD5_Init(&c))
-		return NULL;
-#ifndef CHARSET_EBCDIC
-	MD5_Update(&c,d,n);
-#else
-	{
-		char temp[1024];
-		unsigned long chunk;
-
-		while (n > 0)
-		{
-			chunk = (n > sizeof(temp)) ? sizeof(temp) : n;
-			ebcdic2ascii(temp, d, chunk);
-			MD5_Update(&c,temp,chunk);
-			n -= chunk;
-			d += chunk;
-		}
-	}
-#endif
-	MD5_Final(md,&c);
-	OPENSSL_cleanse(&c,sizeof(c)); /* security consideration */
-	return(md);
-	}
-
diff --git a/crypto/openssl/crypto/md5/md5s.cpp b/crypto/openssl/crypto/md5/md5s.cpp
deleted file mode 100644
index dd343fd4e6ed..000000000000
--- a/crypto/openssl/crypto/md5/md5s.cpp
+++ /dev/null
@@ -1,78 +0,0 @@
-//
-// gettsc.inl
-//
-// gives access to the Pentium's (secret) cycle counter
-//
-// This software was written by Leonard Janke (janke@unixg.ubc.ca)
-// in 1996-7 and is entered, by him, into the public domain.
-
-#if defined(__WATCOMC__)
-void GetTSC(unsigned long&);
-#pragma aux GetTSC = 0x0f 0x31 "mov [edi], eax" parm [edi] modify [edx eax];
-#elif defined(__GNUC__)
-inline
-void GetTSC(unsigned long& tsc)
-{
-  asm volatile(".byte 15, 49\n\t"
-	       : "=eax" (tsc)
-	       :
-	       : "%edx", "%eax");
-}
-#elif defined(_MSC_VER)
-inline
-void GetTSC(unsigned long& tsc)
-{
-  unsigned long a;
-  __asm _emit 0fh
-  __asm _emit 31h
-  __asm mov a, eax;
-  tsc=a;
-}
-#endif      
-
-#include <stdio.h>
-#include <stdlib.h>
-#include <openssl/md5.h>
-
-extern "C" {
-void md5_block_x86(MD5_CTX *ctx, unsigned char *buffer,int num);
-}
-
-void main(int argc,char *argv[])
-	{
-	unsigned char buffer[64*256];
-	MD5_CTX ctx;
-	unsigned long s1,s2,e1,e2;
-	unsigned char k[16];
-	unsigned long data[2];
-	unsigned char iv[8];
-	int i,num=0,numm;
-	int j=0;
-
-	if (argc >= 2)
-		num=atoi(argv[1]);
-
-	if (num == 0) num=16;
-	if (num > 250) num=16;
-	numm=num+2;
-	num*=64;
-	numm*=64;
-
-	for (j=0; j<6; j++)
-		{
-		for (i=0; i<10; i++) /**/
-			{
-			md5_block_x86(&ctx,buffer,numm);
-			GetTSC(s1);
-			md5_block_x86(&ctx,buffer,numm);
-			GetTSC(e1);
-			GetTSC(s2);
-			md5_block_x86(&ctx,buffer,num);
-			GetTSC(e2);
-			md5_block_x86(&ctx,buffer,num);
-			}
-		printf("md5 (%d bytes) %d %d (%.2f)\n",num,
-			e1-s1,e2-s2,(double)((e1-s1)-(e2-s2))/2);
-		}
-	}
-
diff --git a/crypto/openssl/crypto/md5/md5test.c b/crypto/openssl/crypto/md5/md5test.c
deleted file mode 100644
index 0628053fa7ce..000000000000
--- a/crypto/openssl/crypto/md5/md5test.c
+++ /dev/null
@@ -1,140 +0,0 @@
-/* crypto/md5/md5test.c */
-/* Copyright (C) 1995-1998 Eric Young (eay@cryptsoft.com)
- * All rights reserved.
- *
- * This package is an SSL implementation written
- * by Eric Young (eay@cryptsoft.com).
- * The implementation was written so as to conform with Netscapes SSL.
- * 
- * This library is free for commercial and non-commercial use as long as
- * the following conditions are aheared to.  The following conditions
- * apply to all code found in this distribution, be it the RC4, RSA,
- * lhash, DES, etc., code; not just the SSL code.  The SSL documentation
- * included with this distribution is covered by the same copyright terms
- * except that the holder is Tim Hudson (tjh@cryptsoft.com).
- * 
- * Copyright remains Eric Young's, and as such any Copyright notices in
- * the code are not to be removed.
- * If this package is used in a product, Eric Young should be given attribution
- * as the author of the parts of the library used.
- * This can be in the form of a textual message at program startup or
- * in documentation (online or textual) provided with the package.
- * 
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions
- * are met:
- * 1. Redistributions of source code must retain the copyright
- *    notice, this list of conditions and the following disclaimer.
- * 2. Redistributions in binary form must reproduce the above copyright
- *    notice, this list of conditions and the following disclaimer in the
- *    documentation and/or other materials provided with the distribution.
- * 3. All advertising materials mentioning features or use of this software
- *    must display the following acknowledgement:
- *    "This product includes cryptographic software written by
- *     Eric Young (eay@cryptsoft.com)"
- *    The word 'cryptographic' can be left out if the rouines from the library
- *    being used are not cryptographic related :-).
- * 4. If you include any Windows specific code (or a derivative thereof) from 
- *    the apps directory (application code) you must include an acknowledgement:
- *    "This product includes software written by Tim Hudson (tjh@cryptsoft.com)"
- * 
- * THIS SOFTWARE IS PROVIDED BY ERIC YOUNG ``AS IS'' AND
- * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
- * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
- * ARE DISCLAIMED.  IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE
- * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
- * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
- * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
- * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
- * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
- * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
- * SUCH DAMAGE.
- * 
- * The licence and distribution terms for any publically available version or
- * derivative of this code cannot be changed.  i.e. this code cannot simply be
- * copied and put under another distribution licence
- * [including the GNU Public Licence.]
- */
-
-#include <stdio.h>
-#include <string.h>
-#include <stdlib.h>
-
-#include "../e_os.h"
-
-#ifdef OPENSSL_NO_MD5
-int main(int argc, char *argv[])
-{
-    printf("No MD5 support\n");
-    return(0);
-}
-#else
-#include <openssl/evp.h>
-#include <openssl/md5.h>
-
-static char *test[]={
-	"",
-	"a",
-	"abc",
-	"message digest",
-	"abcdefghijklmnopqrstuvwxyz",
-	"ABCDEFGHIJKLMNOPQRSTUVWXYZabcdefghijklmnopqrstuvwxyz0123456789",
-	"12345678901234567890123456789012345678901234567890123456789012345678901234567890",
-	NULL,
-	};
-
-static char *ret[]={
-	"d41d8cd98f00b204e9800998ecf8427e",
-	"0cc175b9c0f1b6a831c399e269772661",
-	"900150983cd24fb0d6963f7d28e17f72",
-	"f96b697d7cb7938d525a2f31aaf161d0",
-	"c3fcd3d76192e4007dfb496cca67e13b",
-	"d174ab98d277d9f5a5611c2c9f419d9f",
-	"57edf4a22be3c955ac49da2e2107b67a",
-	};
-
-static char *pt(unsigned char *md);
-int main(int argc, char *argv[])
-	{
-	int i,err=0;
-	unsigned char **P,**R;
-	char *p;
-	unsigned char md[MD5_DIGEST_LENGTH];
-
-	P=(unsigned char **)test;
-	R=(unsigned char **)ret;
-	i=1;
-	while (*P != NULL)
-		{
-		EVP_Digest(&(P[0][0]),strlen((char *)*P),md,NULL,EVP_md5(), NULL);
-		p=pt(md);
-		if (strcmp(p,(char *)*R) != 0)
-			{
-			printf("error calculating MD5 on '%s'\n",*P);
-			printf("got %s instead of %s\n",p,*R);
-			err++;
-			}
-		else
-			printf("test %d ok\n",i);
-		i++;
-		R++;
-		P++;
-		}
-
-#ifdef OPENSSL_SYS_NETWARE
-    if (err) printf("ERROR: %d\n", err);
-#endif
-	EXIT(err);
-	return(0);
-	}
-
-static char *pt(unsigned char *md)
-	{
-	int i;
-	static char buf[80];
-
-	for (i=0; i<MD5_DIGEST_LENGTH; i++)
-		sprintf(&(buf[i*2]),"%02x",md[i]);
-	return(buf);
-	}
-#endif
diff --git a/crypto/openssl/crypto/mdc2/Makefile b/crypto/openssl/crypto/mdc2/Makefile
deleted file mode 100644
index 1d064f17a627..000000000000
--- a/crypto/openssl/crypto/mdc2/Makefile
+++ /dev/null
@@ -1,93 +0,0 @@
-#
-# OpenSSL/crypto/mdc2/Makefile
-#
-
-DIR=	mdc2
-TOP=	../..
-CC=	cc
-INCLUDES=
-CFLAG=-g
-MAKEFILE=	Makefile
-AR=		ar r
-
-CFLAGS= $(INCLUDES) $(CFLAG)
-
-GENERAL=Makefile
-TEST= mdc2test.c
-APPS=
-
-LIB=$(TOP)/libcrypto.a
-LIBSRC=mdc2dgst.c mdc2_one.c
-LIBOBJ=mdc2dgst.o mdc2_one.o
-
-SRC= $(LIBSRC)
-
-EXHEADER= mdc2.h
-HEADER=	$(EXHEADER)
-
-ALL=    $(GENERAL) $(SRC) $(HEADER)
-
-top:
-	(cd ../..; $(MAKE) DIRS=crypto SDIRS=$(DIR) sub_all)
-
-all:	lib
-
-lib:	$(LIBOBJ)
-	$(AR) $(LIB) $(LIBOBJ)
-	$(RANLIB) $(LIB) || echo Never mind.
-	@touch lib
-
-files:
-	$(PERL) $(TOP)/util/files.pl Makefile >> $(TOP)/MINFO
-
-links:
-	@$(PERL) $(TOP)/util/mklink.pl ../../include/openssl $(EXHEADER)
-	@$(PERL) $(TOP)/util/mklink.pl ../../test $(TEST)
-	@$(PERL) $(TOP)/util/mklink.pl ../../apps $(APPS)
-
-install:
-	@[ -n "$(INSTALLTOP)" ] # should be set by top Makefile...
-	@headerlist="$(EXHEADER)"; for i in $$headerlist ; \
-	do  \
-	(cp $$i $(INSTALL_PREFIX)$(INSTALLTOP)/include/openssl/$$i; \
-	chmod 644 $(INSTALL_PREFIX)$(INSTALLTOP)/include/openssl/$$i ); \
-	done;
-
-tags:
-	ctags $(SRC)
-
-tests:
-
-lint:
-	lint -DLINT $(INCLUDES) $(SRC)>fluff
-
-depend:
-	@[ -n "$(MAKEDEPEND)" ] # should be set by upper Makefile...
-	$(MAKEDEPEND) -- $(CFLAG) $(INCLUDES) $(DEPFLAG) -- $(PROGS) $(LIBSRC)
-
-dclean:
-	$(PERL) -pe 'if (/^# DO NOT DELETE THIS LINE/) {print; exit(0);}' $(MAKEFILE) >Makefile.new
-	mv -f Makefile.new $(MAKEFILE)
-
-clean:
-	rm -f *.o *.obj lib tags core .pure .nfs* *.old *.bak fluff
-
-# DO NOT DELETE THIS LINE -- make depend depends on it.
-
-mdc2_one.o: ../../e_os.h ../../include/openssl/bio.h
-mdc2_one.o: ../../include/openssl/buffer.h ../../include/openssl/crypto.h
-mdc2_one.o: ../../include/openssl/des.h ../../include/openssl/des_old.h
-mdc2_one.o: ../../include/openssl/e_os2.h ../../include/openssl/err.h
-mdc2_one.o: ../../include/openssl/lhash.h ../../include/openssl/mdc2.h
-mdc2_one.o: ../../include/openssl/opensslconf.h
-mdc2_one.o: ../../include/openssl/opensslv.h ../../include/openssl/ossl_typ.h
-mdc2_one.o: ../../include/openssl/safestack.h ../../include/openssl/stack.h
-mdc2_one.o: ../../include/openssl/symhacks.h ../../include/openssl/ui.h
-mdc2_one.o: ../../include/openssl/ui_compat.h ../cryptlib.h mdc2_one.c
-mdc2dgst.o: ../../include/openssl/des.h ../../include/openssl/des_old.h
-mdc2dgst.o: ../../include/openssl/e_os2.h ../../include/openssl/mdc2.h
-mdc2dgst.o: ../../include/openssl/opensslconf.h
-mdc2dgst.o: ../../include/openssl/ossl_typ.h ../../include/openssl/safestack.h
-mdc2dgst.o: ../../include/openssl/stack.h ../../include/openssl/symhacks.h
-mdc2dgst.o: ../../include/openssl/ui.h ../../include/openssl/ui_compat.h
-mdc2dgst.o: mdc2dgst.c
diff --git a/crypto/openssl/crypto/mdc2/mdc2.h b/crypto/openssl/crypto/mdc2/mdc2.h
deleted file mode 100644
index 72778a521236..000000000000
--- a/crypto/openssl/crypto/mdc2/mdc2.h
+++ /dev/null
@@ -1,95 +0,0 @@
-/* crypto/mdc2/mdc2.h */
-/* Copyright (C) 1995-1998 Eric Young (eay@cryptsoft.com)
- * All rights reserved.
- *
- * This package is an SSL implementation written
- * by Eric Young (eay@cryptsoft.com).
- * The implementation was written so as to conform with Netscapes SSL.
- * 
- * This library is free for commercial and non-commercial use as long as
- * the following conditions are aheared to.  The following conditions
- * apply to all code found in this distribution, be it the RC4, RSA,
- * lhash, DES, etc., code; not just the SSL code.  The SSL documentation
- * included with this distribution is covered by the same copyright terms
- * except that the holder is Tim Hudson (tjh@cryptsoft.com).
- * 
- * Copyright remains Eric Young's, and as such any Copyright notices in
- * the code are not to be removed.
- * If this package is used in a product, Eric Young should be given attribution
- * as the author of the parts of the library used.
- * This can be in the form of a textual message at program startup or
- * in documentation (online or textual) provided with the package.
- * 
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions
- * are met:
- * 1. Redistributions of source code must retain the copyright
- *    notice, this list of conditions and the following disclaimer.
- * 2. Redistributions in binary form must reproduce the above copyright
- *    notice, this list of conditions and the following disclaimer in the
- *    documentation and/or other materials provided with the distribution.
- * 3. All advertising materials mentioning features or use of this software
- *    must display the following acknowledgement:
- *    "This product includes cryptographic software written by
- *     Eric Young (eay@cryptsoft.com)"
- *    The word 'cryptographic' can be left out if the rouines from the library
- *    being used are not cryptographic related :-).
- * 4. If you include any Windows specific code (or a derivative thereof) from 
- *    the apps directory (application code) you must include an acknowledgement:
- *    "This product includes software written by Tim Hudson (tjh@cryptsoft.com)"
- * 
- * THIS SOFTWARE IS PROVIDED BY ERIC YOUNG ``AS IS'' AND
- * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
- * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
- * ARE DISCLAIMED.  IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE
- * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
- * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
- * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
- * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
- * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
- * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
- * SUCH DAMAGE.
- * 
- * The licence and distribution terms for any publically available version or
- * derivative of this code cannot be changed.  i.e. this code cannot simply be
- * copied and put under another distribution licence
- * [including the GNU Public Licence.]
- */
-
-#ifndef HEADER_MDC2_H
-#define HEADER_MDC2_H
-
-#include <openssl/des.h>
-
-#ifdef  __cplusplus
-extern "C" {
-#endif
-
-#ifdef OPENSSL_NO_MDC2
-#error MDC2 is disabled.
-#endif
-
-#define MDC2_BLOCK              8
-#define MDC2_DIGEST_LENGTH      16
- 
-typedef struct mdc2_ctx_st
-	{
-	unsigned int num;
-	unsigned char data[MDC2_BLOCK];
-	DES_cblock h,hh;
-	int pad_type; /* either 1 or 2, default 1 */
-	} MDC2_CTX;
-
-
-int MDC2_Init(MDC2_CTX *c);
-int MDC2_Update(MDC2_CTX *c, const unsigned char *data, size_t len);
-int MDC2_Final(unsigned char *md, MDC2_CTX *c);
-unsigned char *MDC2(const unsigned char *d, size_t n,
-	unsigned char *md);
-
-#ifdef  __cplusplus
-}
-#endif
-
-#endif
-
diff --git a/crypto/openssl/crypto/mdc2/mdc2_one.c b/crypto/openssl/crypto/mdc2/mdc2_one.c
deleted file mode 100644
index 72647f67ede4..000000000000
--- a/crypto/openssl/crypto/mdc2/mdc2_one.c
+++ /dev/null
@@ -1,76 +0,0 @@
-/* crypto/mdc2/mdc2_one.c */
-/* Copyright (C) 1995-1998 Eric Young (eay@cryptsoft.com)
- * All rights reserved.
- *
- * This package is an SSL implementation written
- * by Eric Young (eay@cryptsoft.com).
- * The implementation was written so as to conform with Netscapes SSL.
- * 
- * This library is free for commercial and non-commercial use as long as
- * the following conditions are aheared to.  The following conditions
- * apply to all code found in this distribution, be it the RC4, RSA,
- * lhash, DES, etc., code; not just the SSL code.  The SSL documentation
- * included with this distribution is covered by the same copyright terms
- * except that the holder is Tim Hudson (tjh@cryptsoft.com).
- * 
- * Copyright remains Eric Young's, and as such any Copyright notices in
- * the code are not to be removed.
- * If this package is used in a product, Eric Young should be given attribution
- * as the author of the parts of the library used.
- * This can be in the form of a textual message at program startup or
- * in documentation (online or textual) provided with the package.
- * 
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions
- * are met:
- * 1. Redistributions of source code must retain the copyright
- *    notice, this list of conditions and the following disclaimer.
- * 2. Redistributions in binary form must reproduce the above copyright
- *    notice, this list of conditions and the following disclaimer in the
- *    documentation and/or other materials provided with the distribution.
- * 3. All advertising materials mentioning features or use of this software
- *    must display the following acknowledgement:
- *    "This product includes cryptographic software written by
- *     Eric Young (eay@cryptsoft.com)"
- *    The word 'cryptographic' can be left out if the rouines from the library
- *    being used are not cryptographic related :-).
- * 4. If you include any Windows specific code (or a derivative thereof) from 
- *    the apps directory (application code) you must include an acknowledgement:
- *    "This product includes software written by Tim Hudson (tjh@cryptsoft.com)"
- * 
- * THIS SOFTWARE IS PROVIDED BY ERIC YOUNG ``AS IS'' AND
- * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
- * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
- * ARE DISCLAIMED.  IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE
- * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
- * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
- * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
- * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
- * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
- * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
- * SUCH DAMAGE.
- * 
- * The licence and distribution terms for any publically available version or
- * derivative of this code cannot be changed.  i.e. this code cannot simply be
- * copied and put under another distribution licence
- * [including the GNU Public Licence.]
- */
-
-#include <stdio.h>
-#include "cryptlib.h"
-#include <openssl/mdc2.h>
-
-unsigned char *MDC2(const unsigned char *d, size_t n, unsigned char *md)
-	{
-	MDC2_CTX c;
-	static unsigned char m[MDC2_DIGEST_LENGTH];
-
-	if (md == NULL) md=m;
-	if (!MDC2_Init(&c))
-		return NULL;
-	MDC2_Update(&c,d,n);
-        MDC2_Final(md,&c);
-	OPENSSL_cleanse(&c,sizeof(c)); /* security consideration */
-	return(md);
-	}
-
diff --git a/crypto/openssl/crypto/mdc2/mdc2dgst.c b/crypto/openssl/crypto/mdc2/mdc2dgst.c
deleted file mode 100644
index 4aa406edc3ba..000000000000
--- a/crypto/openssl/crypto/mdc2/mdc2dgst.c
+++ /dev/null
@@ -1,199 +0,0 @@
-/* crypto/mdc2/mdc2dgst.c */
-/* Copyright (C) 1995-1998 Eric Young (eay@cryptsoft.com)
- * All rights reserved.
- *
- * This package is an SSL implementation written
- * by Eric Young (eay@cryptsoft.com).
- * The implementation was written so as to conform with Netscapes SSL.
- * 
- * This library is free for commercial and non-commercial use as long as
- * the following conditions are aheared to.  The following conditions
- * apply to all code found in this distribution, be it the RC4, RSA,
- * lhash, DES, etc., code; not just the SSL code.  The SSL documentation
- * included with this distribution is covered by the same copyright terms
- * except that the holder is Tim Hudson (tjh@cryptsoft.com).
- * 
- * Copyright remains Eric Young's, and as such any Copyright notices in
- * the code are not to be removed.
- * If this package is used in a product, Eric Young should be given attribution
- * as the author of the parts of the library used.
- * This can be in the form of a textual message at program startup or
- * in documentation (online or textual) provided with the package.
- * 
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions
- * are met:
- * 1. Redistributions of source code must retain the copyright
- *    notice, this list of conditions and the following disclaimer.
- * 2. Redistributions in binary form must reproduce the above copyright
- *    notice, this list of conditions and the following disclaimer in the
- *    documentation and/or other materials provided with the distribution.
- * 3. All advertising materials mentioning features or use of this software
- *    must display the following acknowledgement:
- *    "This product includes cryptographic software written by
- *     Eric Young (eay@cryptsoft.com)"
- *    The word 'cryptographic' can be left out if the rouines from the library
- *    being used are not cryptographic related :-).
- * 4. If you include any Windows specific code (or a derivative thereof) from 
- *    the apps directory (application code) you must include an acknowledgement:
- *    "This product includes software written by Tim Hudson (tjh@cryptsoft.com)"
- * 
- * THIS SOFTWARE IS PROVIDED BY ERIC YOUNG ``AS IS'' AND
- * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
- * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
- * ARE DISCLAIMED.  IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE
- * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
- * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
- * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
- * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
- * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
- * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
- * SUCH DAMAGE.
- * 
- * The licence and distribution terms for any publically available version or
- * derivative of this code cannot be changed.  i.e. this code cannot simply be
- * copied and put under another distribution licence
- * [including the GNU Public Licence.]
- */
-
-#include <stdio.h>
-#include <stdlib.h>
-#include <string.h>
-#include <openssl/des.h>
-#include <openssl/mdc2.h>
-
-#undef c2l
-#define c2l(c,l)	(l =((DES_LONG)(*((c)++)))    , \
-			 l|=((DES_LONG)(*((c)++)))<< 8L, \
-			 l|=((DES_LONG)(*((c)++)))<<16L, \
-			 l|=((DES_LONG)(*((c)++)))<<24L)
-
-#undef l2c
-#define l2c(l,c)	(*((c)++)=(unsigned char)(((l)     )&0xff), \
-			*((c)++)=(unsigned char)(((l)>> 8L)&0xff), \
-			*((c)++)=(unsigned char)(((l)>>16L)&0xff), \
-			*((c)++)=(unsigned char)(((l)>>24L)&0xff))
-
-static void mdc2_body(MDC2_CTX *c, const unsigned char *in, size_t len);
-int MDC2_Init(MDC2_CTX *c)
-	{
-	c->num=0;
-	c->pad_type=1;
-	memset(&(c->h[0]),0x52,MDC2_BLOCK);
-	memset(&(c->hh[0]),0x25,MDC2_BLOCK);
-	return 1;
-	}
-
-int MDC2_Update(MDC2_CTX *c, const unsigned char *in, size_t len)
-	{
-	size_t i,j;
-
-	i=c->num;
-	if (i != 0)
-		{
-		if (i+len < MDC2_BLOCK)
-			{
-			/* partial block */
-			memcpy(&(c->data[i]),in,len);
-			c->num+=(int)len;
-			return 1;
-			}
-		else
-			{
-			/* filled one */
-			j=MDC2_BLOCK-i;
-			memcpy(&(c->data[i]),in,j);
-			len-=j;
-			in+=j;
-			c->num=0;
-			mdc2_body(c,&(c->data[0]),MDC2_BLOCK);
-			}
-		}
-	i=len&~((size_t)MDC2_BLOCK-1);
-	if (i > 0) mdc2_body(c,in,i);
-	j=len-i;
-	if (j > 0)
-		{
-		memcpy(&(c->data[0]),&(in[i]),j);
-		c->num=(int)j;
-		}
-	return 1;
-	}
-
-static void mdc2_body(MDC2_CTX *c, const unsigned char *in, size_t len)
-	{
-	register DES_LONG tin0,tin1;
-	register DES_LONG ttin0,ttin1;
-	DES_LONG d[2],dd[2];
-	DES_key_schedule k;
-	unsigned char *p;
-	size_t i;
-
-	for (i=0; i<len; i+=8)
-		{
-		c2l(in,tin0); d[0]=dd[0]=tin0;
-		c2l(in,tin1); d[1]=dd[1]=tin1;
-		c->h[0]=(c->h[0]&0x9f)|0x40;
-		c->hh[0]=(c->hh[0]&0x9f)|0x20;
-
-		DES_set_odd_parity(&c->h);
-		DES_set_key_unchecked(&c->h,&k);
-		DES_encrypt1(d,&k,1);
-
-		DES_set_odd_parity(&c->hh);
-		DES_set_key_unchecked(&c->hh,&k);
-		DES_encrypt1(dd,&k,1);
-
-		ttin0=tin0^dd[0];
-		ttin1=tin1^dd[1];
-		tin0^=d[0];
-		tin1^=d[1];
-
-		p=c->h;
-		l2c(tin0,p);
-		l2c(ttin1,p);
-		p=c->hh;
-		l2c(ttin0,p);
-		l2c(tin1,p);
-		}
-	}
-
-int MDC2_Final(unsigned char *md, MDC2_CTX *c)
-	{
-	unsigned int i;
-	int j;
-
-	i=c->num;
-	j=c->pad_type;
-	if ((i > 0) || (j == 2))
-		{
-		if (j == 2)
-			c->data[i++]=0x80;
-		memset(&(c->data[i]),0,MDC2_BLOCK-i);
-		mdc2_body(c,c->data,MDC2_BLOCK);
-		}
-	memcpy(md,(char *)c->h,MDC2_BLOCK);
-	memcpy(&(md[MDC2_BLOCK]),(char *)c->hh,MDC2_BLOCK);
-	return 1;
-	}
-
-#undef TEST
-
-#ifdef TEST
-main()
-	{
-	unsigned char md[MDC2_DIGEST_LENGTH];
-	int i;
-	MDC2_CTX c;
-	static char *text="Now is the time for all ";
-
-	MDC2_Init(&c);
-	MDC2_Update(&c,text,strlen(text));
-	MDC2_Final(&(md[0]),&c);
-
-	for (i=0; i<MDC2_DIGEST_LENGTH; i++)
-		printf("%02X",md[i]);
-	printf("\n");
-	}
-
-#endif
diff --git a/crypto/openssl/crypto/mdc2/mdc2test.c b/crypto/openssl/crypto/mdc2/mdc2test.c
deleted file mode 100644
index 017b31add2ea..000000000000
--- a/crypto/openssl/crypto/mdc2/mdc2test.c
+++ /dev/null
@@ -1,149 +0,0 @@
-/* crypto/mdc2/mdc2test.c */
-/* Copyright (C) 1995-1998 Eric Young (eay@cryptsoft.com)
- * All rights reserved.
- *
- * This package is an SSL implementation written
- * by Eric Young (eay@cryptsoft.com).
- * The implementation was written so as to conform with Netscapes SSL.
- * 
- * This library is free for commercial and non-commercial use as long as
- * the following conditions are aheared to.  The following conditions
- * apply to all code found in this distribution, be it the RC4, RSA,
- * lhash, DES, etc., code; not just the SSL code.  The SSL documentation
- * included with this distribution is covered by the same copyright terms
- * except that the holder is Tim Hudson (tjh@cryptsoft.com).
- * 
- * Copyright remains Eric Young's, and as such any Copyright notices in
- * the code are not to be removed.
- * If this package is used in a product, Eric Young should be given attribution
- * as the author of the parts of the library used.
- * This can be in the form of a textual message at program startup or
- * in documentation (online or textual) provided with the package.
- * 
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions
- * are met:
- * 1. Redistributions of source code must retain the copyright
- *    notice, this list of conditions and the following disclaimer.
- * 2. Redistributions in binary form must reproduce the above copyright
- *    notice, this list of conditions and the following disclaimer in the
- *    documentation and/or other materials provided with the distribution.
- * 3. All advertising materials mentioning features or use of this software
- *    must display the following acknowledgement:
- *    "This product includes cryptographic software written by
- *     Eric Young (eay@cryptsoft.com)"
- *    The word 'cryptographic' can be left out if the rouines from the library
- *    being used are not cryptographic related :-).
- * 4. If you include any Windows specific code (or a derivative thereof) from 
- *    the apps directory (application code) you must include an acknowledgement:
- *    "This product includes software written by Tim Hudson (tjh@cryptsoft.com)"
- * 
- * THIS SOFTWARE IS PROVIDED BY ERIC YOUNG ``AS IS'' AND
- * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
- * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
- * ARE DISCLAIMED.  IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE
- * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
- * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
- * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
- * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
- * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
- * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
- * SUCH DAMAGE.
- * 
- * The licence and distribution terms for any publically available version or
- * derivative of this code cannot be changed.  i.e. this code cannot simply be
- * copied and put under another distribution licence
- * [including the GNU Public Licence.]
- */
-
-#include <stdio.h>
-#include <stdlib.h>
-#include <string.h>
-
-#include "../e_os.h"
-
-#if defined(OPENSSL_NO_DES) && !defined(OPENSSL_NO_MDC2)
-#define OPENSSL_NO_MDC2
-#endif
-
-#ifdef OPENSSL_NO_MDC2
-int main(int argc, char *argv[])
-{
-    printf("No MDC2 support\n");
-    return(0);
-}
-#else
-#include <openssl/evp.h>
-#include <openssl/mdc2.h>
-
-#ifdef CHARSET_EBCDIC
-#include <openssl/ebcdic.h>
-#endif
-
-static unsigned char pad1[16]={
-	0x42,0xE5,0x0C,0xD2,0x24,0xBA,0xCE,0xBA,
-	0x76,0x0B,0xDD,0x2B,0xD4,0x09,0x28,0x1A
-	};
-
-static unsigned char pad2[16]={
-	0x2E,0x46,0x79,0xB5,0xAD,0xD9,0xCA,0x75,
-	0x35,0xD8,0x7A,0xFE,0xAB,0x33,0xBE,0xE2
-	};
-
-int main(int argc, char *argv[])
-	{
-	int ret=0;
-	unsigned char md[MDC2_DIGEST_LENGTH];
-	int i;
-	EVP_MD_CTX c;
-	static char *text="Now is the time for all ";
-
-#ifdef CHARSET_EBCDIC
-	ebcdic2ascii(text,text,strlen(text));
-#endif
-
-	EVP_MD_CTX_init(&c);
-	EVP_DigestInit_ex(&c,EVP_mdc2(), NULL);
-	EVP_DigestUpdate(&c,(unsigned char *)text,strlen(text));
-	EVP_DigestFinal_ex(&c,&(md[0]),NULL);
-
-	if (memcmp(md,pad1,MDC2_DIGEST_LENGTH) != 0)
-		{
-		for (i=0; i<MDC2_DIGEST_LENGTH; i++)
-			printf("%02X",md[i]);
-		printf(" <- generated\n");
-		for (i=0; i<MDC2_DIGEST_LENGTH; i++)
-			printf("%02X",pad1[i]);
-		printf(" <- correct\n");
-		ret=1;
-		}
-	else
-		printf("pad1 - ok\n");
-
-	EVP_DigestInit_ex(&c,EVP_mdc2(), NULL);
-	/* FIXME: use a ctl function? */
-	((MDC2_CTX *)c.md_data)->pad_type=2;
-	EVP_DigestUpdate(&c,(unsigned char *)text,strlen(text));
-	EVP_DigestFinal_ex(&c,&(md[0]),NULL);
-
-	if (memcmp(md,pad2,MDC2_DIGEST_LENGTH) != 0)
-		{
-		for (i=0; i<MDC2_DIGEST_LENGTH; i++)
-			printf("%02X",md[i]);
-		printf(" <- generated\n");
-		for (i=0; i<MDC2_DIGEST_LENGTH; i++)
-			printf("%02X",pad2[i]);
-		printf(" <- correct\n");
-		ret=1;
-		}
-	else
-		printf("pad2 - ok\n");
-
-	EVP_MD_CTX_cleanup(&c);
-#ifdef OPENSSL_SYS_NETWARE
-    if (ret) printf("ERROR: %d\n", ret);
-#endif
-	EXIT(ret);
-	return(ret);
-	}
-#endif
diff --git a/crypto/openssl/crypto/mem.c b/crypto/openssl/crypto/mem.c
deleted file mode 100644
index 6635167228da..000000000000
--- a/crypto/openssl/crypto/mem.c
+++ /dev/null
@@ -1,401 +0,0 @@
-/* crypto/mem.c */
-/* Copyright (C) 1995-1998 Eric Young (eay@cryptsoft.com)
- * All rights reserved.
- *
- * This package is an SSL implementation written
- * by Eric Young (eay@cryptsoft.com).
- * The implementation was written so as to conform with Netscapes SSL.
- * 
- * This library is free for commercial and non-commercial use as long as
- * the following conditions are aheared to.  The following conditions
- * apply to all code found in this distribution, be it the RC4, RSA,
- * lhash, DES, etc., code; not just the SSL code.  The SSL documentation
- * included with this distribution is covered by the same copyright terms
- * except that the holder is Tim Hudson (tjh@cryptsoft.com).
- * 
- * Copyright remains Eric Young's, and as such any Copyright notices in
- * the code are not to be removed.
- * If this package is used in a product, Eric Young should be given attribution
- * as the author of the parts of the library used.
- * This can be in the form of a textual message at program startup or
- * in documentation (online or textual) provided with the package.
- * 
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions
- * are met:
- * 1. Redistributions of source code must retain the copyright
- *    notice, this list of conditions and the following disclaimer.
- * 2. Redistributions in binary form must reproduce the above copyright
- *    notice, this list of conditions and the following disclaimer in the
- *    documentation and/or other materials provided with the distribution.
- * 3. All advertising materials mentioning features or use of this software
- *    must display the following acknowledgement:
- *    "This product includes cryptographic software written by
- *     Eric Young (eay@cryptsoft.com)"
- *    The word 'cryptographic' can be left out if the rouines from the library
- *    being used are not cryptographic related :-).
- * 4. If you include any Windows specific code (or a derivative thereof) from 
- *    the apps directory (application code) you must include an acknowledgement:
- *    "This product includes software written by Tim Hudson (tjh@cryptsoft.com)"
- * 
- * THIS SOFTWARE IS PROVIDED BY ERIC YOUNG ``AS IS'' AND
- * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
- * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
- * ARE DISCLAIMED.  IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE
- * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
- * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
- * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
- * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
- * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
- * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
- * SUCH DAMAGE.
- * 
- * The licence and distribution terms for any publically available version or
- * derivative of this code cannot be changed.  i.e. this code cannot simply be
- * copied and put under another distribution licence
- * [including the GNU Public Licence.]
- */
-
-#include <stdio.h>
-#include <stdlib.h>
-#include <openssl/crypto.h>
-#include "cryptlib.h"
-
-
-static int allow_customize = 1;      /* we provide flexible functions for */
-static int allow_customize_debug = 1;/* exchanging memory-related functions at
-                                      * run-time, but this must be done
-                                      * before any blocks are actually
-                                      * allocated; or we'll run into huge
-                                      * problems when malloc/free pairs
-                                      * don't match etc. */
-
-
-
-/* the following pointers may be changed as long as 'allow_customize' is set */
-
-static void *(*malloc_func)(size_t)         = malloc;
-static void *default_malloc_ex(size_t num, const char *file, int line)
-	{ return malloc_func(num); }
-static void *(*malloc_ex_func)(size_t, const char *file, int line)
-        = default_malloc_ex;
-
-static void *(*realloc_func)(void *, size_t)= realloc;
-static void *default_realloc_ex(void *str, size_t num,
-        const char *file, int line)
-	{ return realloc_func(str,num); }
-static void *(*realloc_ex_func)(void *, size_t, const char *file, int line)
-        = default_realloc_ex;
-
-static void (*free_func)(void *)            = free;
-
-static void *(*malloc_locked_func)(size_t)  = malloc;
-static void *default_malloc_locked_ex(size_t num, const char *file, int line)
-	{ return malloc_locked_func(num); }
-static void *(*malloc_locked_ex_func)(size_t, const char *file, int line)
-        = default_malloc_locked_ex;
-
-static void (*free_locked_func)(void *)     = free;
-
-
-
-/* may be changed as long as 'allow_customize_debug' is set */
-/* XXX use correct function pointer types */
-#ifdef CRYPTO_MDEBUG
-/* use default functions from mem_dbg.c */
-static void (*malloc_debug_func)(void *,int,const char *,int,int)
-	= CRYPTO_dbg_malloc;
-static void (*realloc_debug_func)(void *,void *,int,const char *,int,int)
-	= CRYPTO_dbg_realloc;
-static void (*free_debug_func)(void *,int) = CRYPTO_dbg_free;
-static void (*set_debug_options_func)(long) = CRYPTO_dbg_set_options;
-static long (*get_debug_options_func)(void) = CRYPTO_dbg_get_options;
-#else
-/* applications can use CRYPTO_malloc_debug_init() to select above case
- * at run-time */
-static void (*malloc_debug_func)(void *,int,const char *,int,int) = NULL;
-static void (*realloc_debug_func)(void *,void *,int,const char *,int,int)
-	= NULL;
-static void (*free_debug_func)(void *,int) = NULL;
-static void (*set_debug_options_func)(long) = NULL;
-static long (*get_debug_options_func)(void) = NULL;
-#endif
-
-
-int CRYPTO_set_mem_functions(void *(*m)(size_t), void *(*r)(void *, size_t),
-	void (*f)(void *))
-	{
-	if (!allow_customize)
-		return 0;
-	if ((m == 0) || (r == 0) || (f == 0))
-		return 0;
-	malloc_func=m; malloc_ex_func=default_malloc_ex;
-	realloc_func=r; realloc_ex_func=default_realloc_ex;
-	free_func=f;
-	malloc_locked_func=m; malloc_locked_ex_func=default_malloc_locked_ex;
-	free_locked_func=f;
-	return 1;
-	}
-
-int CRYPTO_set_mem_ex_functions(
-        void *(*m)(size_t,const char *,int),
-        void *(*r)(void *, size_t,const char *,int),
-	void (*f)(void *))
-	{
-	if (!allow_customize)
-		return 0;
-	if ((m == 0) || (r == 0) || (f == 0))
-		return 0;
-	malloc_func=0; malloc_ex_func=m;
-	realloc_func=0; realloc_ex_func=r;
-	free_func=f;
-	malloc_locked_func=0; malloc_locked_ex_func=m;
-	free_locked_func=f;
-	return 1;
-	}
-
-int CRYPTO_set_locked_mem_functions(void *(*m)(size_t), void (*f)(void *))
-	{
-	if (!allow_customize)
-		return 0;
-	if ((m == NULL) || (f == NULL))
-		return 0;
-	malloc_locked_func=m; malloc_locked_ex_func=default_malloc_locked_ex;
-	free_locked_func=f;
-	return 1;
-	}
-
-int CRYPTO_set_locked_mem_ex_functions(
-        void *(*m)(size_t,const char *,int),
-        void (*f)(void *))
-	{
-	if (!allow_customize)
-		return 0;
-	if ((m == NULL) || (f == NULL))
-		return 0;
-	malloc_locked_func=0; malloc_locked_ex_func=m;
-	free_func=f;
-	return 1;
-	}
-
-int CRYPTO_set_mem_debug_functions(void (*m)(void *,int,const char *,int,int),
-				   void (*r)(void *,void *,int,const char *,int,int),
-				   void (*f)(void *,int),
-				   void (*so)(long),
-				   long (*go)(void))
-	{
-	if (!allow_customize_debug)
-		return 0;
-	malloc_debug_func=m;
-	realloc_debug_func=r;
-	free_debug_func=f;
-	set_debug_options_func=so;
-	get_debug_options_func=go;
-	return 1;
-	}
-
-
-void CRYPTO_get_mem_functions(void *(**m)(size_t), void *(**r)(void *, size_t),
-	void (**f)(void *))
-	{
-	if (m != NULL) *m = (malloc_ex_func == default_malloc_ex) ? 
-	                     malloc_func : 0;
-	if (r != NULL) *r = (realloc_ex_func == default_realloc_ex) ? 
-	                     realloc_func : 0;
-	if (f != NULL) *f=free_func;
-	}
-
-void CRYPTO_get_mem_ex_functions(
-        void *(**m)(size_t,const char *,int),
-        void *(**r)(void *, size_t,const char *,int),
-	void (**f)(void *))
-	{
-	if (m != NULL) *m = (malloc_ex_func != default_malloc_ex) ?
-	                    malloc_ex_func : 0;
-	if (r != NULL) *r = (realloc_ex_func != default_realloc_ex) ?
-	                    realloc_ex_func : 0;
-	if (f != NULL) *f=free_func;
-	}
-
-void CRYPTO_get_locked_mem_functions(void *(**m)(size_t), void (**f)(void *))
-	{
-	if (m != NULL) *m = (malloc_locked_ex_func == default_malloc_locked_ex) ? 
-	                     malloc_locked_func : 0;
-	if (f != NULL) *f=free_locked_func;
-	}
-
-void CRYPTO_get_locked_mem_ex_functions(
-        void *(**m)(size_t,const char *,int),
-        void (**f)(void *))
-	{
-	if (m != NULL) *m = (malloc_locked_ex_func != default_malloc_locked_ex) ?
-	                    malloc_locked_ex_func : 0;
-	if (f != NULL) *f=free_locked_func;
-	}
-
-void CRYPTO_get_mem_debug_functions(void (**m)(void *,int,const char *,int,int),
-				    void (**r)(void *,void *,int,const char *,int,int),
-				    void (**f)(void *,int),
-				    void (**so)(long),
-				    long (**go)(void))
-	{
-	if (m != NULL) *m=malloc_debug_func;
-	if (r != NULL) *r=realloc_debug_func;
-	if (f != NULL) *f=free_debug_func;
-	if (so != NULL) *so=set_debug_options_func;
-	if (go != NULL) *go=get_debug_options_func;
-	}
-
-
-void *CRYPTO_malloc_locked(int num, const char *file, int line)
-	{
-	void *ret = NULL;
-	extern unsigned char cleanse_ctr;
-
-	if (num <= 0) return NULL;
-
-	allow_customize = 0;
-	if (malloc_debug_func != NULL)
-		{
-		allow_customize_debug = 0;
-		malloc_debug_func(NULL, num, file, line, 0);
-		}
-	ret = malloc_locked_ex_func(num,file,line);
-#ifdef LEVITTE_DEBUG_MEM
-	fprintf(stderr, "LEVITTE_DEBUG_MEM:         > 0x%p (%d)\n", ret, num);
-#endif
-	if (malloc_debug_func != NULL)
-		malloc_debug_func(ret, num, file, line, 1);
-
-        /* Create a dependency on the value of 'cleanse_ctr' so our memory
-         * sanitisation function can't be optimised out. NB: We only do
-         * this for >2Kb so the overhead doesn't bother us. */
-        if(ret && (num > 2048))
-		((unsigned char *)ret)[0] = cleanse_ctr;
-
-	return ret;
-	}
-
-void CRYPTO_free_locked(void *str)
-	{
-	if (free_debug_func != NULL)
-		free_debug_func(str, 0);
-#ifdef LEVITTE_DEBUG_MEM
-	fprintf(stderr, "LEVITTE_DEBUG_MEM:         < 0x%p\n", str);
-#endif
-	free_locked_func(str);
-	if (free_debug_func != NULL)
-		free_debug_func(NULL, 1);
-	}
-
-void *CRYPTO_malloc(int num, const char *file, int line)
-	{
-	void *ret = NULL;
-	extern unsigned char cleanse_ctr;
-
-	if (num <= 0) return NULL;
-
-	allow_customize = 0;
-	if (malloc_debug_func != NULL)
-		{
-		allow_customize_debug = 0;
-		malloc_debug_func(NULL, num, file, line, 0);
-		}
-	ret = malloc_ex_func(num,file,line);
-#ifdef LEVITTE_DEBUG_MEM
-	fprintf(stderr, "LEVITTE_DEBUG_MEM:         > 0x%p (%d)\n", ret, num);
-#endif
-	if (malloc_debug_func != NULL)
-		malloc_debug_func(ret, num, file, line, 1);
-
-        /* Create a dependency on the value of 'cleanse_ctr' so our memory
-         * sanitisation function can't be optimised out. NB: We only do
-         * this for >2Kb so the overhead doesn't bother us. */
-        if(ret && (num > 2048))
-                ((unsigned char *)ret)[0] = cleanse_ctr;
-
-	return ret;
-	}
-
-void *CRYPTO_realloc(void *str, int num, const char *file, int line)
-	{
-	void *ret = NULL;
-
-	if (str == NULL)
-		return CRYPTO_malloc(num, file, line);
-
-	if (num <= 0) return NULL;
-
-	if (realloc_debug_func != NULL)
-		realloc_debug_func(str, NULL, num, file, line, 0);
-	ret = realloc_ex_func(str,num,file,line);
-#ifdef LEVITTE_DEBUG_MEM
-	fprintf(stderr, "LEVITTE_DEBUG_MEM:         | 0x%p -> 0x%p (%d)\n", str, ret, num);
-#endif
-	if (realloc_debug_func != NULL)
-		realloc_debug_func(str, ret, num, file, line, 1);
-
-	return ret;
-	}
-
-void *CRYPTO_realloc_clean(void *str, int old_len, int num, const char *file,
-			   int line)
-	{
-	void *ret = NULL;
-
-	if (str == NULL)
-		return CRYPTO_malloc(num, file, line);
-
-	if (num <= 0) return NULL;
-
-	if (realloc_debug_func != NULL)
-		realloc_debug_func(str, NULL, num, file, line, 0);
-	ret=malloc_ex_func(num,file,line);
-	if(ret)
-		{
-		memcpy(ret,str,old_len);
-		OPENSSL_cleanse(str,old_len);
-		free_func(str);
-		}
-#ifdef LEVITTE_DEBUG_MEM
-	fprintf(stderr,
-		"LEVITTE_DEBUG_MEM:         | 0x%p -> 0x%p (%d)\n",
-		str, ret, num);
-#endif
-	if (realloc_debug_func != NULL)
-		realloc_debug_func(str, ret, num, file, line, 1);
-
-	return ret;
-	}
-
-void CRYPTO_free(void *str)
-	{
-	if (free_debug_func != NULL)
-		free_debug_func(str, 0);
-#ifdef LEVITTE_DEBUG_MEM
-	fprintf(stderr, "LEVITTE_DEBUG_MEM:         < 0x%p\n", str);
-#endif
-	free_func(str);
-	if (free_debug_func != NULL)
-		free_debug_func(NULL, 1);
-	}
-
-void *CRYPTO_remalloc(void *a, int num, const char *file, int line)
-	{
-	if (a != NULL) OPENSSL_free(a);
-	a=(char *)OPENSSL_malloc(num);
-	return(a);
-	}
-
-void CRYPTO_set_mem_debug_options(long bits)
-	{
-	if (set_debug_options_func != NULL)
-		set_debug_options_func(bits);
-	}
-
-long CRYPTO_get_mem_debug_options(void)
-	{
-	if (get_debug_options_func != NULL)
-		return get_debug_options_func();
-	return 0;
-	}
diff --git a/crypto/openssl/crypto/mem_clr.c b/crypto/openssl/crypto/mem_clr.c
deleted file mode 100644
index 75cbfb374e3b..000000000000
--- a/crypto/openssl/crypto/mem_clr.c
+++ /dev/null
@@ -1,75 +0,0 @@
-/* crypto/mem_clr.c -*- mode:C; c-file-style: "eay" -*- */
-/* Written by Geoff Thorpe (geoff@geoffthorpe.net) for the OpenSSL
- * project 2002.
- */
-/* ====================================================================
- * Copyright (c) 2001 The OpenSSL Project.  All rights reserved.
- *
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions
- * are met:
- *
- * 1. Redistributions of source code must retain the above copyright
- *    notice, this list of conditions and the following disclaimer. 
- *
- * 2. Redistributions in binary form must reproduce the above copyright
- *    notice, this list of conditions and the following disclaimer in
- *    the documentation and/or other materials provided with the
- *    distribution.
- *
- * 3. All advertising materials mentioning features or use of this
- *    software must display the following acknowledgment:
- *    "This product includes software developed by the OpenSSL Project
- *    for use in the OpenSSL Toolkit. (http://www.openssl.org/)"
- *
- * 4. The names "OpenSSL Toolkit" and "OpenSSL Project" must not be used to
- *    endorse or promote products derived from this software without
- *    prior written permission. For written permission, please contact
- *    openssl-core@openssl.org.
- *
- * 5. Products derived from this software may not be called "OpenSSL"
- *    nor may "OpenSSL" appear in their names without prior written
- *    permission of the OpenSSL Project.
- *
- * 6. Redistributions of any form whatsoever must retain the following
- *    acknowledgment:
- *    "This product includes software developed by the OpenSSL Project
- *    for use in the OpenSSL Toolkit (http://www.openssl.org/)"
- *
- * THIS SOFTWARE IS PROVIDED BY THE OpenSSL PROJECT ``AS IS'' AND ANY
- * EXPRESSED OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
- * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR
- * PURPOSE ARE DISCLAIMED.  IN NO EVENT SHALL THE OpenSSL PROJECT OR
- * ITS CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
- * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
- * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
- * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
- * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
- * STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
- * ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED
- * OF THE POSSIBILITY OF SUCH DAMAGE.
- * ====================================================================
- *
- * This product includes cryptographic software written by Eric Young
- * (eay@cryptsoft.com).  This product includes software written by Tim
- * Hudson (tjh@cryptsoft.com).
- *
- */
-
-#include <string.h>
-#include <openssl/crypto.h>
-
-unsigned char cleanse_ctr = 0;
-
-void OPENSSL_cleanse(void *ptr, size_t len)
-	{
-	unsigned char *p = ptr;
-	size_t loop = len;
-	while(loop--)
-		{
-		*(p++) = cleanse_ctr;
-		cleanse_ctr += (17 + (unsigned char)((unsigned long)p & 0xF));
-		}
-	if(memchr(ptr, cleanse_ctr, len))
-		cleanse_ctr += 63;
-	}
diff --git a/crypto/openssl/crypto/mem_dbg.c b/crypto/openssl/crypto/mem_dbg.c
deleted file mode 100644
index 8316485217ac..000000000000
--- a/crypto/openssl/crypto/mem_dbg.c
+++ /dev/null
@@ -1,795 +0,0 @@
-/* crypto/mem_dbg.c */
-/* Copyright (C) 1995-1998 Eric Young (eay@cryptsoft.com)
- * All rights reserved.
- *
- * This package is an SSL implementation written
- * by Eric Young (eay@cryptsoft.com).
- * The implementation was written so as to conform with Netscapes SSL.
- * 
- * This library is free for commercial and non-commercial use as long as
- * the following conditions are aheared to.  The following conditions
- * apply to all code found in this distribution, be it the RC4, RSA,
- * lhash, DES, etc., code; not just the SSL code.  The SSL documentation
- * included with this distribution is covered by the same copyright terms
- * except that the holder is Tim Hudson (tjh@cryptsoft.com).
- * 
- * Copyright remains Eric Young's, and as such any Copyright notices in
- * the code are not to be removed.
- * If this package is used in a product, Eric Young should be given attribution
- * as the author of the parts of the library used.
- * This can be in the form of a textual message at program startup or
- * in documentation (online or textual) provided with the package.
- * 
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions
- * are met:
- * 1. Redistributions of source code must retain the copyright
- *    notice, this list of conditions and the following disclaimer.
- * 2. Redistributions in binary form must reproduce the above copyright
- *    notice, this list of conditions and the following disclaimer in the
- *    documentation and/or other materials provided with the distribution.
- * 3. All advertising materials mentioning features or use of this software
- *    must display the following acknowledgement:
- *    "This product includes cryptographic software written by
- *     Eric Young (eay@cryptsoft.com)"
- *    The word 'cryptographic' can be left out if the rouines from the library
- *    being used are not cryptographic related :-).
- * 4. If you include any Windows specific code (or a derivative thereof) from 
- *    the apps directory (application code) you must include an acknowledgement:
- *    "This product includes software written by Tim Hudson (tjh@cryptsoft.com)"
- * 
- * THIS SOFTWARE IS PROVIDED BY ERIC YOUNG ``AS IS'' AND
- * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
- * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
- * ARE DISCLAIMED.  IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE
- * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
- * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
- * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
- * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
- * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
- * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
- * SUCH DAMAGE.
- * 
- * The licence and distribution terms for any publically available version or
- * derivative of this code cannot be changed.  i.e. this code cannot simply be
- * copied and put under another distribution licence
- * [including the GNU Public Licence.]
- */
-
-#include <stdio.h>
-#include <stdlib.h>
-#include <time.h>	
-#include "cryptlib.h"
-#include <openssl/crypto.h>
-#include <openssl/buffer.h>
-#include <openssl/bio.h>
-#include <openssl/lhash.h>
-
-static int mh_mode=CRYPTO_MEM_CHECK_OFF;
-/* The state changes to CRYPTO_MEM_CHECK_ON | CRYPTO_MEM_CHECK_ENABLE
- * when the application asks for it (usually after library initialisation
- * for which no book-keeping is desired).
- *
- * State CRYPTO_MEM_CHECK_ON exists only temporarily when the library
- * thinks that certain allocations should not be checked (e.g. the data
- * structures used for memory checking).  It is not suitable as an initial
- * state: the library will unexpectedly enable memory checking when it
- * executes one of those sections that want to disable checking
- * temporarily.
- *
- * State CRYPTO_MEM_CHECK_ENABLE without ..._ON makes no sense whatsoever.
- */
-
-static unsigned long order = 0; /* number of memory requests */
-static LHASH *mh=NULL; /* hash-table of memory requests (address as key);
-                        * access requires MALLOC2 lock */
-
-
-typedef struct app_mem_info_st
-/* For application-defined information (static C-string `info')
- * to be displayed in memory leak list.
- * Each thread has its own stack.  For applications, there is
- *   CRYPTO_push_info("...")     to push an entry,
- *   CRYPTO_pop_info()           to pop an entry,
- *   CRYPTO_remove_all_info()    to pop all entries.
- */
-	{	
-	unsigned long thread;
-	const char *file;
-	int line;
-	const char *info;
-	struct app_mem_info_st *next; /* tail of thread's stack */
-	int references;
-	} APP_INFO;
-
-static void app_info_free(APP_INFO *);
-
-static LHASH *amih=NULL; /* hash-table with those app_mem_info_st's
-                          * that are at the top of their thread's stack
-                          * (with `thread' as key);
-                          * access requires MALLOC2 lock */
-
-typedef struct mem_st
-/* memory-block description */
-	{
-	void *addr;
-	int num;
-	const char *file;
-	int line;
-	unsigned long thread;
-	unsigned long order;
-	time_t time;
-	APP_INFO *app_info;
-	} MEM;
-
-static long options =             /* extra information to be recorded */
-#if defined(CRYPTO_MDEBUG_TIME) || defined(CRYPTO_MDEBUG_ALL)
-	V_CRYPTO_MDEBUG_TIME |
-#endif
-#if defined(CRYPTO_MDEBUG_THREAD) || defined(CRYPTO_MDEBUG_ALL)
-	V_CRYPTO_MDEBUG_THREAD |
-#endif
-	0;
-
-
-static unsigned int num_disable = 0; /* num_disable > 0
-                                      *     iff
-                                      * mh_mode == CRYPTO_MEM_CHECK_ON (w/o ..._ENABLE)
-                                      */
-static unsigned long disabling_thread = 0; /* Valid iff num_disable > 0.
-                                            * CRYPTO_LOCK_MALLOC2 is locked
-                                            * exactly in this case (by the
-                                            * thread named in disabling_thread).
-                                            */
-
-static void app_info_free(APP_INFO *inf)
-	{
-	if (--(inf->references) <= 0)
-		{
-		if (inf->next != NULL)
-			{
-			app_info_free(inf->next);
-			}
-		OPENSSL_free(inf);
-		}
-	}
-
-int CRYPTO_mem_ctrl(int mode)
-	{
-	int ret=mh_mode;
-
-	CRYPTO_w_lock(CRYPTO_LOCK_MALLOC);
-	switch (mode)
-		{
-	/* for applications (not to be called while multiple threads
-	 * use the library): */
-	case CRYPTO_MEM_CHECK_ON: /* aka MemCheck_start() */
-		mh_mode = CRYPTO_MEM_CHECK_ON|CRYPTO_MEM_CHECK_ENABLE;
-		num_disable = 0;
-		break;
-	case CRYPTO_MEM_CHECK_OFF: /* aka MemCheck_stop() */
-		mh_mode = 0;
-		num_disable = 0; /* should be true *before* MemCheck_stop is used,
-		                    or there'll be a lot of confusion */
-		break;
-
-	/* switch off temporarily (for library-internal use): */
-	case CRYPTO_MEM_CHECK_DISABLE: /* aka MemCheck_off() */
-		if (mh_mode & CRYPTO_MEM_CHECK_ON)
-			{
-			if (!num_disable || (disabling_thread != CRYPTO_thread_id())) /* otherwise we already have the MALLOC2 lock */
-				{
-				/* Long-time lock CRYPTO_LOCK_MALLOC2 must not be claimed while
-				 * we're holding CRYPTO_LOCK_MALLOC, or we'll deadlock if
-				 * somebody else holds CRYPTO_LOCK_MALLOC2 (and cannot release
-				 * it because we block entry to this function).
-				 * Give them a chance, first, and then claim the locks in
-				 * appropriate order (long-time lock first).
-				 */
-				CRYPTO_w_unlock(CRYPTO_LOCK_MALLOC);
-				/* Note that after we have waited for CRYPTO_LOCK_MALLOC2
-				 * and CRYPTO_LOCK_MALLOC, we'll still be in the right
-				 * "case" and "if" branch because MemCheck_start and
-				 * MemCheck_stop may never be used while there are multiple
-				 * OpenSSL threads. */
-				CRYPTO_w_lock(CRYPTO_LOCK_MALLOC2);
-				CRYPTO_w_lock(CRYPTO_LOCK_MALLOC);
-				mh_mode &= ~CRYPTO_MEM_CHECK_ENABLE;
-				disabling_thread=CRYPTO_thread_id();
-				}
-			num_disable++;
-			}
-		break;
-	case CRYPTO_MEM_CHECK_ENABLE: /* aka MemCheck_on() */
-		if (mh_mode & CRYPTO_MEM_CHECK_ON)
-			{
-			if (num_disable) /* always true, or something is going wrong */
-				{
-				num_disable--;
-				if (num_disable == 0)
-					{
-					mh_mode|=CRYPTO_MEM_CHECK_ENABLE;
-					CRYPTO_w_unlock(CRYPTO_LOCK_MALLOC2);
-					}
-				}
-			}
-		break;
-
-	default:
-		break;
-		}
-	CRYPTO_w_unlock(CRYPTO_LOCK_MALLOC);
-	return(ret);
-	}
-
-int CRYPTO_is_mem_check_on(void)
-	{
-	int ret = 0;
-
-	if (mh_mode & CRYPTO_MEM_CHECK_ON)
-		{
-		CRYPTO_r_lock(CRYPTO_LOCK_MALLOC);
-
-		ret = (mh_mode & CRYPTO_MEM_CHECK_ENABLE)
-			|| (disabling_thread != CRYPTO_thread_id());
-
-		CRYPTO_r_unlock(CRYPTO_LOCK_MALLOC);
-		}
-	return(ret);
-	}	
-
-
-void CRYPTO_dbg_set_options(long bits)
-	{
-	options = bits;
-	}
-
-long CRYPTO_dbg_get_options(void)
-	{
-	return options;
-	}
-
-/* static int mem_cmp(MEM *a, MEM *b) */
-static int mem_cmp(const void *a_void, const void *b_void)
-	{
-#ifdef _WIN64
-	const char *a=(const char *)((const MEM *)a_void)->addr,
-		   *b=(const char *)((const MEM *)b_void)->addr;
-	if (a==b)	return 0;
-	else if (a>b)	return 1;
-	else		return -1;
-#else
-	return((const char *)((const MEM *)a_void)->addr
-		- (const char *)((const MEM *)b_void)->addr);
-#endif
-	}
-
-/* static unsigned long mem_hash(MEM *a) */
-static unsigned long mem_hash(const void *a_void)
-	{
-	unsigned long ret;
-
-	ret=(unsigned long)((const MEM *)a_void)->addr;
-
-	ret=ret*17851+(ret>>14)*7+(ret>>4)*251;
-	return(ret);
-	}
-
-/* static int app_info_cmp(APP_INFO *a, APP_INFO *b) */
-static int app_info_cmp(const void *a_void, const void *b_void)
-	{
-	return(((const APP_INFO *)a_void)->thread
-		!= ((const APP_INFO *)b_void)->thread);
-	}
-
-/* static unsigned long app_info_hash(APP_INFO *a) */
-static unsigned long app_info_hash(const void *a_void)
-	{
-	unsigned long ret;
-
-	ret=(unsigned long)((const APP_INFO *)a_void)->thread;
-
-	ret=ret*17851+(ret>>14)*7+(ret>>4)*251;
-	return(ret);
-	}
-
-static APP_INFO *pop_info(void)
-	{
-	APP_INFO tmp;
-	APP_INFO *ret = NULL;
-
-	if (amih != NULL)
-		{
-		tmp.thread=CRYPTO_thread_id();
-		if ((ret=(APP_INFO *)lh_delete(amih,&tmp)) != NULL)
-			{
-			APP_INFO *next=ret->next;
-
-			if (next != NULL)
-				{
-				next->references++;
-				lh_insert(amih,(char *)next);
-				}
-#ifdef LEVITTE_DEBUG_MEM
-			if (ret->thread != tmp.thread)
-				{
-				fprintf(stderr, "pop_info(): deleted info has other thread ID (%lu) than the current thread (%lu)!!!!\n",
-					ret->thread, tmp.thread);
-				abort();
-				}
-#endif
-			if (--(ret->references) <= 0)
-				{
-				ret->next = NULL;
-				if (next != NULL)
-					next->references--;
-				OPENSSL_free(ret);
-				}
-			}
-		}
-	return(ret);
-	}
-
-int CRYPTO_push_info_(const char *info, const char *file, int line)
-	{
-	APP_INFO *ami, *amim;
-	int ret=0;
-
-	if (is_MemCheck_on())
-		{
-		MemCheck_off(); /* obtain MALLOC2 lock */
-
-		if ((ami = (APP_INFO *)OPENSSL_malloc(sizeof(APP_INFO))) == NULL)
-			{
-			ret=0;
-			goto err;
-			}
-		if (amih == NULL)
-			{
-			if ((amih=lh_new(app_info_hash, app_info_cmp)) == NULL)
-				{
-				OPENSSL_free(ami);
-				ret=0;
-				goto err;
-				}
-			}
-
-		ami->thread=CRYPTO_thread_id();
-		ami->file=file;
-		ami->line=line;
-		ami->info=info;
-		ami->references=1;
-		ami->next=NULL;
-
-		if ((amim=(APP_INFO *)lh_insert(amih,(char *)ami)) != NULL)
-			{
-#ifdef LEVITTE_DEBUG_MEM
-			if (ami->thread != amim->thread)
-				{
-				fprintf(stderr, "CRYPTO_push_info(): previous info has other thread ID (%lu) than the current thread (%lu)!!!!\n",
-					amim->thread, ami->thread);
-				abort();
-				}
-#endif
-			ami->next=amim;
-			}
- err:
-		MemCheck_on(); /* release MALLOC2 lock */
-		}
-
-	return(ret);
-	}
-
-int CRYPTO_pop_info(void)
-	{
-	int ret=0;
-
-	if (is_MemCheck_on()) /* _must_ be true, or something went severely wrong */
-		{
-		MemCheck_off(); /* obtain MALLOC2 lock */
-
-		ret=(pop_info() != NULL);
-
-		MemCheck_on(); /* release MALLOC2 lock */
-		}
-	return(ret);
-	}
-
-int CRYPTO_remove_all_info(void)
-	{
-	int ret=0;
-
-	if (is_MemCheck_on()) /* _must_ be true */
-		{
-		MemCheck_off(); /* obtain MALLOC2 lock */
-
-		while(pop_info() != NULL)
-			ret++;
-
-		MemCheck_on(); /* release MALLOC2 lock */
-		}
-	return(ret);
-	}
-
-
-static unsigned long break_order_num=0;
-void CRYPTO_dbg_malloc(void *addr, int num, const char *file, int line,
-	int before_p)
-	{
-	MEM *m,*mm;
-	APP_INFO tmp,*amim;
-
-	switch(before_p & 127)
-		{
-	case 0:
-		break;
-	case 1:
-		if (addr == NULL)
-			break;
-
-		if (is_MemCheck_on())
-			{
-			MemCheck_off(); /* make sure we hold MALLOC2 lock */
-			if ((m=(MEM *)OPENSSL_malloc(sizeof(MEM))) == NULL)
-				{
-				OPENSSL_free(addr);
-				MemCheck_on(); /* release MALLOC2 lock
-				                * if num_disabled drops to 0 */
-				return;
-				}
-			if (mh == NULL)
-				{
-				if ((mh=lh_new(mem_hash, mem_cmp)) == NULL)
-					{
-					OPENSSL_free(addr);
-					OPENSSL_free(m);
-					addr=NULL;
-					goto err;
-					}
-				}
-
-			m->addr=addr;
-			m->file=file;
-			m->line=line;
-			m->num=num;
-			if (options & V_CRYPTO_MDEBUG_THREAD)
-				m->thread=CRYPTO_thread_id();
-			else
-				m->thread=0;
-
-			if (order == break_order_num)
-				{
-				/* BREAK HERE */
-				m->order=order;
-				}
-			m->order=order++;
-#ifdef LEVITTE_DEBUG_MEM
-			fprintf(stderr, "LEVITTE_DEBUG_MEM: [%5d] %c 0x%p (%d)\n",
-				m->order,
-				(before_p & 128) ? '*' : '+',
-				m->addr, m->num);
-#endif
-			if (options & V_CRYPTO_MDEBUG_TIME)
-				m->time=time(NULL);
-			else
-				m->time=0;
-
-			tmp.thread=CRYPTO_thread_id();
-			m->app_info=NULL;
-			if (amih != NULL
-				&& (amim=(APP_INFO *)lh_retrieve(amih,(char *)&tmp)) != NULL)
-				{
-				m->app_info = amim;
-				amim->references++;
-				}
-
-			if ((mm=(MEM *)lh_insert(mh,(char *)m)) != NULL)
-				{
-				/* Not good, but don't sweat it */
-				if (mm->app_info != NULL)
-					{
-					mm->app_info->references--;
-					}
-				OPENSSL_free(mm);
-				}
-		err:
-			MemCheck_on(); /* release MALLOC2 lock
-			                * if num_disabled drops to 0 */
-			}
-		break;
-		}
-	return;
-	}
-
-void CRYPTO_dbg_free(void *addr, int before_p)
-	{
-	MEM m,*mp;
-
-	switch(before_p)
-		{
-	case 0:
-		if (addr == NULL)
-			break;
-
-		if (is_MemCheck_on() && (mh != NULL))
-			{
-			MemCheck_off(); /* make sure we hold MALLOC2 lock */
-
-			m.addr=addr;
-			mp=(MEM *)lh_delete(mh,(char *)&m);
-			if (mp != NULL)
-				{
-#ifdef LEVITTE_DEBUG_MEM
-			fprintf(stderr, "LEVITTE_DEBUG_MEM: [%5d] - 0x%p (%d)\n",
-				mp->order, mp->addr, mp->num);
-#endif
-				if (mp->app_info != NULL)
-					app_info_free(mp->app_info);
-				OPENSSL_free(mp);
-				}
-
-			MemCheck_on(); /* release MALLOC2 lock
-			                * if num_disabled drops to 0 */
-			}
-		break;
-	case 1:
-		break;
-		}
-	}
-
-void CRYPTO_dbg_realloc(void *addr1, void *addr2, int num,
-	const char *file, int line, int before_p)
-	{
-	MEM m,*mp;
-
-#ifdef LEVITTE_DEBUG_MEM
-	fprintf(stderr, "LEVITTE_DEBUG_MEM: --> CRYPTO_dbg_malloc(addr1 = %p, addr2 = %p, num = %d, file = \"%s\", line = %d, before_p = %d)\n",
-		addr1, addr2, num, file, line, before_p);
-#endif
-
-	switch(before_p)
-		{
-	case 0:
-		break;
-	case 1:
-		if (addr2 == NULL)
-			break;
-
-		if (addr1 == NULL)
-			{
-			CRYPTO_dbg_malloc(addr2, num, file, line, 128 | before_p);
-			break;
-			}
-
-		if (is_MemCheck_on())
-			{
-			MemCheck_off(); /* make sure we hold MALLOC2 lock */
-
-			m.addr=addr1;
-			mp=(MEM *)lh_delete(mh,(char *)&m);
-			if (mp != NULL)
-				{
-#ifdef LEVITTE_DEBUG_MEM
-				fprintf(stderr, "LEVITTE_DEBUG_MEM: [%5d] * 0x%p (%d) -> 0x%p (%d)\n",
-					mp->order,
-					mp->addr, mp->num,
-					addr2, num);
-#endif
-				mp->addr=addr2;
-				mp->num=num;
-				lh_insert(mh,(char *)mp);
-				}
-
-			MemCheck_on(); /* release MALLOC2 lock
-			                * if num_disabled drops to 0 */
-			}
-		break;
-		}
-	return;
-	}
-
-
-typedef struct mem_leak_st
-	{
-	BIO *bio;
-	int chunks;
-	long bytes;
-	} MEM_LEAK;
-
-static void print_leak(const MEM *m, MEM_LEAK *l)
-	{
-	char buf[1024];
-	char *bufp = buf;
-	APP_INFO *amip;
-	int ami_cnt;
-	struct tm *lcl = NULL;
-	unsigned long ti;
-
-#define BUF_REMAIN (sizeof buf - (size_t)(bufp - buf))
-
-	if(m->addr == (char *)l->bio)
-	    return;
-
-	if (options & V_CRYPTO_MDEBUG_TIME)
-		{
-		lcl = localtime(&m->time);
-	
-		BIO_snprintf(bufp, BUF_REMAIN, "[%02d:%02d:%02d] ",
-			lcl->tm_hour,lcl->tm_min,lcl->tm_sec);
-		bufp += strlen(bufp);
-		}
-
-	BIO_snprintf(bufp, BUF_REMAIN, "%5lu file=%s, line=%d, ",
-		m->order,m->file,m->line);
-	bufp += strlen(bufp);
-
-	if (options & V_CRYPTO_MDEBUG_THREAD)
-		{
-		BIO_snprintf(bufp, BUF_REMAIN, "thread=%lu, ", m->thread);
-		bufp += strlen(bufp);
-		}
-
-	BIO_snprintf(bufp, BUF_REMAIN, "number=%d, address=%08lX\n",
-		m->num,(unsigned long)m->addr);
-	bufp += strlen(bufp);
-
-	BIO_puts(l->bio,buf);
-	
-	l->chunks++;
-	l->bytes+=m->num;
-
-	amip=m->app_info;
-	ami_cnt=0;
-	if (!amip)
-		return;
-	ti=amip->thread;
-	
-	do
-		{
-		int buf_len;
-		int info_len;
-
-		ami_cnt++;
-		memset(buf,'>',ami_cnt);
-		BIO_snprintf(buf + ami_cnt, sizeof buf - ami_cnt,
-			" thread=%lu, file=%s, line=%d, info=\"",
-			amip->thread, amip->file, amip->line);
-		buf_len=strlen(buf);
-		info_len=strlen(amip->info);
-		if (128 - buf_len - 3 < info_len)
-			{
-			memcpy(buf + buf_len, amip->info, 128 - buf_len - 3);
-			buf_len = 128 - 3;
-			}
-		else
-			{
-			BUF_strlcpy(buf + buf_len, amip->info,
-				    sizeof buf - buf_len);
-			buf_len = strlen(buf);
-			}
-		BIO_snprintf(buf + buf_len, sizeof buf - buf_len, "\"\n");
-		
-		BIO_puts(l->bio,buf);
-
-		amip = amip->next;
-		}
-	while(amip && amip->thread == ti);
-		
-#ifdef LEVITTE_DEBUG_MEM
-	if (amip)
-		{
-		fprintf(stderr, "Thread switch detected in backtrace!!!!\n");
-		abort();
-		}
-#endif
-	}
-
-static IMPLEMENT_LHASH_DOALL_ARG_FN(print_leak, const MEM *, MEM_LEAK *)
-
-void CRYPTO_mem_leaks(BIO *b)
-	{
-	MEM_LEAK ml;
-
-	if (mh == NULL && amih == NULL)
-		return;
-
-	MemCheck_off(); /* obtain MALLOC2 lock */
-
-	ml.bio=b;
-	ml.bytes=0;
-	ml.chunks=0;
-	if (mh != NULL)
-		lh_doall_arg(mh, LHASH_DOALL_ARG_FN(print_leak),
-				(char *)&ml);
-	if (ml.chunks != 0)
-		{
-		BIO_printf(b,"%ld bytes leaked in %d chunks\n",
-			   ml.bytes,ml.chunks);
-		}
-	else
-		{
-		/* Make sure that, if we found no leaks, memory-leak debugging itself
-		 * does not introduce memory leaks (which might irritate
-		 * external debugging tools).
-		 * (When someone enables leak checking, but does not call
-		 * this function, we declare it to be their fault.)
-		 *
-		 * XXX    This should be in CRYPTO_mem_leaks_cb,
-		 * and CRYPTO_mem_leaks should be implemented by
-		 * using CRYPTO_mem_leaks_cb.
-		 * (Also their should be a variant of lh_doall_arg
-		 * that takes a function pointer instead of a void *;
-		 * this would obviate the ugly and illegal
-		 * void_fn_to_char kludge in CRYPTO_mem_leaks_cb.
-		 * Otherwise the code police will come and get us.)
-		 */
-		int old_mh_mode;
-
-		CRYPTO_w_lock(CRYPTO_LOCK_MALLOC);
-
-		/* avoid deadlock when lh_free() uses CRYPTO_dbg_free(),
-		 * which uses CRYPTO_is_mem_check_on */
-		old_mh_mode = mh_mode;
-		mh_mode = CRYPTO_MEM_CHECK_OFF;
-
-		if (mh != NULL)
-			{
-			lh_free(mh);
-			mh = NULL;
-			}
-		if (amih != NULL)
-			{
-			if (lh_num_items(amih) == 0) 
-				{
-				lh_free(amih);
-				amih = NULL;
-				}
-			}
-
-		mh_mode = old_mh_mode;
-		CRYPTO_w_unlock(CRYPTO_LOCK_MALLOC);
-		}
-	MemCheck_on(); /* release MALLOC2 lock */
-	}
-
-#ifndef OPENSSL_NO_FP_API
-void CRYPTO_mem_leaks_fp(FILE *fp)
-	{
-	BIO *b;
-
-	if (mh == NULL) return;
-	/* Need to turn off memory checking when allocated BIOs ... especially
-	 * as we're creating them at a time when we're trying to check we've not
-	 * left anything un-free()'d!! */
-	MemCheck_off();
-	b = BIO_new(BIO_s_file());
-	MemCheck_on();
-	if(!b) return;
-	BIO_set_fp(b,fp,BIO_NOCLOSE);
-	CRYPTO_mem_leaks(b);
-	BIO_free(b);
-	}
-#endif
-
-
-
-/* FIXME: We really don't allow much to the callback.  For example, it has
-   no chance of reaching the info stack for the item it processes.  Should
-   it really be this way?  -- Richard Levitte */
-/* NB: The prototypes have been typedef'd to CRYPTO_MEM_LEAK_CB inside crypto.h
- * If this code is restructured, remove the callback type if it is no longer
- * needed. -- Geoff Thorpe */
-static void cb_leak(const MEM *m, CRYPTO_MEM_LEAK_CB **cb)
-	{
-	(**cb)(m->order,m->file,m->line,m->num,m->addr);
-	}
-
-static IMPLEMENT_LHASH_DOALL_ARG_FN(cb_leak, const MEM *, CRYPTO_MEM_LEAK_CB **)
-
-void CRYPTO_mem_leaks_cb(CRYPTO_MEM_LEAK_CB *cb)
-	{
-	if (mh == NULL) return;
-	CRYPTO_w_lock(CRYPTO_LOCK_MALLOC2);
-	lh_doall_arg(mh, LHASH_DOALL_ARG_FN(cb_leak), &cb);
-	CRYPTO_w_unlock(CRYPTO_LOCK_MALLOC2);
-	}
diff --git a/crypto/openssl/crypto/o_dir.c b/crypto/openssl/crypto/o_dir.c
deleted file mode 100644
index 42891ea45928..000000000000
--- a/crypto/openssl/crypto/o_dir.c
+++ /dev/null
@@ -1,83 +0,0 @@
-/* crypto/o_dir.c -*- mode:C; c-file-style: "eay" -*- */
-/* Written by Richard Levitte (richard@levitte.org) for the OpenSSL
- * project 2004.
- */
-/* ====================================================================
- * Copyright (c) 2004 The OpenSSL Project.  All rights reserved.
- *
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions
- * are met:
- *
- * 1. Redistributions of source code must retain the above copyright
- *    notice, this list of conditions and the following disclaimer. 
- *
- * 2. Redistributions in binary form must reproduce the above copyright
- *    notice, this list of conditions and the following disclaimer in
- *    the documentation and/or other materials provided with the
- *    distribution.
- *
- * 3. All advertising materials mentioning features or use of this
- *    software must display the following acknowledgment:
- *    "This product includes software developed by the OpenSSL Project
- *    for use in the OpenSSL Toolkit. (http://www.openssl.org/)"
- *
- * 4. The names "OpenSSL Toolkit" and "OpenSSL Project" must not be used to
- *    endorse or promote products derived from this software without
- *    prior written permission. For written permission, please contact
- *    openssl-core@openssl.org.
- *
- * 5. Products derived from this software may not be called "OpenSSL"
- *    nor may "OpenSSL" appear in their names without prior written
- *    permission of the OpenSSL Project.
- *
- * 6. Redistributions of any form whatsoever must retain the following
- *    acknowledgment:
- *    "This product includes software developed by the OpenSSL Project
- *    for use in the OpenSSL Toolkit (http://www.openssl.org/)"
- *
- * THIS SOFTWARE IS PROVIDED BY THE OpenSSL PROJECT ``AS IS'' AND ANY
- * EXPRESSED OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
- * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR
- * PURPOSE ARE DISCLAIMED.  IN NO EVENT SHALL THE OpenSSL PROJECT OR
- * ITS CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
- * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
- * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
- * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
- * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
- * STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
- * ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED
- * OF THE POSSIBILITY OF SUCH DAMAGE.
- * ====================================================================
- *
- * This product includes cryptographic software written by Eric Young
- * (eay@cryptsoft.com).  This product includes software written by Tim
- * Hudson (tjh@cryptsoft.com).
- *
- */
-
-#include <errno.h>
-#include <e_os.h>
-
-/* The routines really come from the Levitte Programming, so to make
-   life simple, let's just use the raw files and hack the symbols to
-   fit our namespace.  */
-#define LP_DIR_CTX OPENSSL_DIR_CTX
-#define LP_dir_context_st OPENSSL_dir_context_st
-#define LP_find_file OPENSSL_DIR_read
-#define LP_find_file_end OPENSSL_DIR_end
-
-#include "o_dir.h"
-
-#define LPDIR_H
-#if defined OPENSSL_SYS_UNIX || defined DJGPP
-#include "LPdir_unix.c"
-#elif defined OPENSSL_SYS_VMS
-#include "LPdir_vms.c"
-#elif defined OPENSSL_SYS_WIN32
-#include "LPdir_win32.c"
-#elif defined OPENSSL_SYS_WINCE
-#include "LPdir_wince.c"
-#else
-#include "LPdir_nyi.c"
-#endif
diff --git a/crypto/openssl/crypto/o_dir.h b/crypto/openssl/crypto/o_dir.h
deleted file mode 100644
index 4b725c031247..000000000000
--- a/crypto/openssl/crypto/o_dir.h
+++ /dev/null
@@ -1,53 +0,0 @@
-/* crypto/o_dir.h -*- mode:C; c-file-style: "eay" -*- */
-/* Copied from Richard Levitte's (richard@levitte.org) LP library.  All
- * symbol names have been changed, with permission from the author.
- */
-
-/* $LP: LPlib/source/LPdir.h,v 1.1 2004/06/14 08:56:04 _cvs_levitte Exp $ */
-/*
- * Copyright (c) 2004, Richard Levitte <richard@levitte.org>
- * All rights reserved.
- *
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions
- * are met:
- * 1. Redistributions of source code must retain the above copyright
- *    notice, this list of conditions and the following disclaimer.
- * 2. Redistributions in binary form must reproduce the above copyright
- *    notice, this list of conditions and the following disclaimer in the
- *    documentation and/or other materials provided with the distribution.
- *
- * THIS SOFTWARE IS PROVIDED BY THE REGENTS AND CONTRIBUTORS ``AS IS'' AND
- * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
- * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
- * ARE DISCLAIMED.  IN NO EVENT SHALL THE REGENTS OR CONTRIBUTORS BE LIABLE
- * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
- * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
- * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
- * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
- * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
- * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
- * SUCH DAMAGE.
- */
-
-
-#ifndef O_DIR_H
-#define O_DIR_H
-
-#ifdef __cplusplus
-extern "C" {
-#endif
-
-  typedef struct OPENSSL_dir_context_st OPENSSL_DIR_CTX;
-
-  /* returns NULL on error or end-of-directory.
-     If it is end-of-directory, errno will be zero */
-  const char *OPENSSL_DIR_read(OPENSSL_DIR_CTX **ctx, const char *directory);
-  /* returns 1 on success, 0 on error */
-  int OPENSSL_DIR_end(OPENSSL_DIR_CTX **ctx);
-
-#ifdef __cplusplus
-}
-#endif
-
-#endif /* LPDIR_H */
diff --git a/crypto/openssl/crypto/o_dir_test.c b/crypto/openssl/crypto/o_dir_test.c
deleted file mode 100644
index 3d75ecb0050c..000000000000
--- a/crypto/openssl/crypto/o_dir_test.c
+++ /dev/null
@@ -1,70 +0,0 @@
-/* crypto/o_dir.h -*- mode:C; c-file-style: "eay" -*- */
-/* Copied from Richard Levitte's (richard@levitte.org) LP library.  All
- * symbol names have been changed, with permission from the author.
- */
-
-/* $LP: LPlib/test/test_dir.c,v 1.1 2004/06/16 22:59:47 _cvs_levitte Exp $ */
-/*
- * Copyright (c) 2004, Richard Levitte <richard@levitte.org>
- * All rights reserved.
- *
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions
- * are met:
- * 1. Redistributions of source code must retain the above copyright
- *    notice, this list of conditions and the following disclaimer.
- * 2. Redistributions in binary form must reproduce the above copyright
- *    notice, this list of conditions and the following disclaimer in the
- *    documentation and/or other materials provided with the distribution.
- *
- * THIS SOFTWARE IS PROVIDED BY THE REGENTS AND CONTRIBUTORS ``AS IS'' AND
- * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
- * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
- * ARE DISCLAIMED.  IN NO EVENT SHALL THE REGENTS OR CONTRIBUTORS BE LIABLE
- * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
- * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
- * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
- * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
- * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
- * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
- * SUCH DAMAGE.
- */
-
-#include <stddef.h>
-#include <stdlib.h>
-#include <stdio.h>
-#include <errno.h>
-#include "e_os2.h"
-#include "o_dir.h"
-
-#if defined OPENSSL_SYS_UNIX || defined OPENSSL_SYS_WIN32 || defined OPENSSL_SYS_WINCE
-#define CURRDIR "."
-#elif defined OPENSSL_SYS_VMS
-#define CURRDIR "SYS$DISK:[]"
-#else
-#error "No supported platform defined!"
-#endif
-
-int main()
-{
-  OPENSSL_DIR_CTX *ctx = NULL;
-  const char *result;
-
-  while((result = OPENSSL_DIR_read(&ctx, CURRDIR)) != NULL)
-    {
-      printf("%s\n", result);
-    }
-
-  if (errno)
-    {
-      perror("test_dir");
-      exit(1);
-    }
-
-  if (!OPENSSL_DIR_end(&ctx))
-    {
-      perror("test_dir");
-      exit(2);
-    }
-  exit(0);
-}
diff --git a/crypto/openssl/crypto/o_str.c b/crypto/openssl/crypto/o_str.c
deleted file mode 100644
index 2db099333a7f..000000000000
--- a/crypto/openssl/crypto/o_str.c
+++ /dev/null
@@ -1,105 +0,0 @@
-/* crypto/o_str.c -*- mode:C; c-file-style: "eay" -*- */
-/* Written by Richard Levitte (richard@levitte.org) for the OpenSSL
- * project 2003.
- */
-/* ====================================================================
- * Copyright (c) 2003 The OpenSSL Project.  All rights reserved.
- *
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions
- * are met:
- *
- * 1. Redistributions of source code must retain the above copyright
- *    notice, this list of conditions and the following disclaimer. 
- *
- * 2. Redistributions in binary form must reproduce the above copyright
- *    notice, this list of conditions and the following disclaimer in
- *    the documentation and/or other materials provided with the
- *    distribution.
- *
- * 3. All advertising materials mentioning features or use of this
- *    software must display the following acknowledgment:
- *    "This product includes software developed by the OpenSSL Project
- *    for use in the OpenSSL Toolkit. (http://www.openssl.org/)"
- *
- * 4. The names "OpenSSL Toolkit" and "OpenSSL Project" must not be used to
- *    endorse or promote products derived from this software without
- *    prior written permission. For written permission, please contact
- *    openssl-core@openssl.org.
- *
- * 5. Products derived from this software may not be called "OpenSSL"
- *    nor may "OpenSSL" appear in their names without prior written
- *    permission of the OpenSSL Project.
- *
- * 6. Redistributions of any form whatsoever must retain the following
- *    acknowledgment:
- *    "This product includes software developed by the OpenSSL Project
- *    for use in the OpenSSL Toolkit (http://www.openssl.org/)"
- *
- * THIS SOFTWARE IS PROVIDED BY THE OpenSSL PROJECT ``AS IS'' AND ANY
- * EXPRESSED OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
- * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR
- * PURPOSE ARE DISCLAIMED.  IN NO EVENT SHALL THE OpenSSL PROJECT OR
- * ITS CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
- * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
- * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
- * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
- * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
- * STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
- * ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED
- * OF THE POSSIBILITY OF SUCH DAMAGE.
- * ====================================================================
- *
- * This product includes cryptographic software written by Eric Young
- * (eay@cryptsoft.com).  This product includes software written by Tim
- * Hudson (tjh@cryptsoft.com).
- *
- */
-
-#include <ctype.h>
-#include <e_os.h>
-#include "o_str.h"
-
-int OPENSSL_strncasecmp(const char *str1, const char *str2, size_t n)
-	{
-#if defined(OPENSSL_IMPLEMENTS_strncasecmp)
-	while (*str1 && *str2 && n)
-		{
-		int res = toupper(*str1) - toupper(*str2);
-		if (res) return res < 0 ? -1 : 1;
-		str1++;
-		str2++;
-		n--;
-		}
-	if (n == 0)
-		return 0;
-	if (*str1)
-		return 1;
-	if (*str2)
-		return -1;
-	return 0;
-#else
-	/* Recursion hazard warning! Whenever strncasecmp is #defined as
-	 * OPENSSL_strncasecmp, OPENSSL_IMPLEMENTS_strncasecmp must be
-	 * defined as well. */
-	return strncasecmp(str1, str2, n);
-#endif
-	}
-int OPENSSL_strcasecmp(const char *str1, const char *str2)
-	{
-#if defined(OPENSSL_IMPLEMENTS_strncasecmp)
-	return OPENSSL_strncasecmp(str1, str2, (size_t)-1);
-#else
-	return strcasecmp(str1, str2);
-#endif
-	}
-
-int OPENSSL_memcmp(const void *v1,const void *v2,size_t n)
-	{
-	const unsigned char *c1=v1,*c2=v2;
-	int ret=0;
-
-	while(n && (ret=*c1-*c2)==0) n--,c1++,c2++;
-
-	return ret;
-	}
diff --git a/crypto/openssl/crypto/o_str.h b/crypto/openssl/crypto/o_str.h
deleted file mode 100644
index dfc98494c6c5..000000000000
--- a/crypto/openssl/crypto/o_str.h
+++ /dev/null
@@ -1,68 +0,0 @@
-/* crypto/o_str.h -*- mode:C; c-file-style: "eay" -*- */
-/* Written by Richard Levitte (richard@levitte.org) for the OpenSSL
- * project 2003.
- */
-/* ====================================================================
- * Copyright (c) 2003 The OpenSSL Project.  All rights reserved.
- *
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions
- * are met:
- *
- * 1. Redistributions of source code must retain the above copyright
- *    notice, this list of conditions and the following disclaimer. 
- *
- * 2. Redistributions in binary form must reproduce the above copyright
- *    notice, this list of conditions and the following disclaimer in
- *    the documentation and/or other materials provided with the
- *    distribution.
- *
- * 3. All advertising materials mentioning features or use of this
- *    software must display the following acknowledgment:
- *    "This product includes software developed by the OpenSSL Project
- *    for use in the OpenSSL Toolkit. (http://www.OpenSSL.org/)"
- *
- * 4. The names "OpenSSL Toolkit" and "OpenSSL Project" must not be used to
- *    endorse or promote products derived from this software without
- *    prior written permission. For written permission, please contact
- *    licensing@OpenSSL.org.
- *
- * 5. Products derived from this software may not be called "OpenSSL"
- *    nor may "OpenSSL" appear in their names without prior written
- *    permission of the OpenSSL Project.
- *
- * 6. Redistributions of any form whatsoever must retain the following
- *    acknowledgment:
- *    "This product includes software developed by the OpenSSL Project
- *    for use in the OpenSSL Toolkit (http://www.OpenSSL.org/)"
- *
- * THIS SOFTWARE IS PROVIDED BY THE OpenSSL PROJECT ``AS IS'' AND ANY
- * EXPRESSED OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
- * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR
- * PURPOSE ARE DISCLAIMED.  IN NO EVENT SHALL THE OpenSSL PROJECT OR
- * ITS CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
- * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
- * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
- * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
- * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
- * STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
- * ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED
- * OF THE POSSIBILITY OF SUCH DAMAGE.
- * ====================================================================
- *
- * This product includes cryptographic software written by Eric Young
- * (eay@cryptsoft.com).  This product includes software written by Tim
- * Hudson (tjh@cryptsoft.com).
- *
- */
-
-#ifndef HEADER_O_STR_H
-#define HEADER_O_STR_H
-
-#include <stddef.h>		/* to get size_t */
-
-int OPENSSL_strcasecmp(const char *str1, const char *str2);
-int OPENSSL_strncasecmp(const char *str1, const char *str2, size_t n);
-int OPENSSL_memcmp(const void *p1,const void *p2,size_t n);
-
-#endif
diff --git a/crypto/openssl/crypto/o_time.c b/crypto/openssl/crypto/o_time.c
deleted file mode 100644
index e29091d6504c..000000000000
--- a/crypto/openssl/crypto/o_time.c
+++ /dev/null
@@ -1,217 +0,0 @@
-/* crypto/o_time.c -*- mode:C; c-file-style: "eay" -*- */
-/* Written by Richard Levitte (richard@levitte.org) for the OpenSSL
- * project 2001.
- */
-/* ====================================================================
- * Copyright (c) 2001 The OpenSSL Project.  All rights reserved.
- *
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions
- * are met:
- *
- * 1. Redistributions of source code must retain the above copyright
- *    notice, this list of conditions and the following disclaimer. 
- *
- * 2. Redistributions in binary form must reproduce the above copyright
- *    notice, this list of conditions and the following disclaimer in
- *    the documentation and/or other materials provided with the
- *    distribution.
- *
- * 3. All advertising materials mentioning features or use of this
- *    software must display the following acknowledgment:
- *    "This product includes software developed by the OpenSSL Project
- *    for use in the OpenSSL Toolkit. (http://www.OpenSSL.org/)"
- *
- * 4. The names "OpenSSL Toolkit" and "OpenSSL Project" must not be used to
- *    endorse or promote products derived from this software without
- *    prior written permission. For written permission, please contact
- *    licensing@OpenSSL.org.
- *
- * 5. Products derived from this software may not be called "OpenSSL"
- *    nor may "OpenSSL" appear in their names without prior written
- *    permission of the OpenSSL Project.
- *
- * 6. Redistributions of any form whatsoever must retain the following
- *    acknowledgment:
- *    "This product includes software developed by the OpenSSL Project
- *    for use in the OpenSSL Toolkit (http://www.OpenSSL.org/)"
- *
- * THIS SOFTWARE IS PROVIDED BY THE OpenSSL PROJECT ``AS IS'' AND ANY
- * EXPRESSED OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
- * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR
- * PURPOSE ARE DISCLAIMED.  IN NO EVENT SHALL THE OpenSSL PROJECT OR
- * ITS CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
- * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
- * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
- * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
- * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
- * STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
- * ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED
- * OF THE POSSIBILITY OF SUCH DAMAGE.
- * ====================================================================
- *
- * This product includes cryptographic software written by Eric Young
- * (eay@cryptsoft.com).  This product includes software written by Tim
- * Hudson (tjh@cryptsoft.com).
- *
- */
-
-#include <openssl/e_os2.h>
-#include <string.h>
-#include "o_time.h"
-
-#ifdef OPENSSL_SYS_VMS
-# include <libdtdef.h>
-# include <lib$routines.h>
-# include <lnmdef.h>
-# include <starlet.h>
-# include <descrip.h>
-# include <stdlib.h>
-#endif
-
-struct tm *OPENSSL_gmtime(const time_t *timer, struct tm *result)
-	{
-	struct tm *ts = NULL;
-
-#if defined(OPENSSL_THREADS) && !defined(OPENSSL_SYS_WIN32) && !defined(OPENSSL_SYS_OS2) && !defined(__CYGWIN32__) && (!defined(OPENSSL_SYS_VMS) || defined(gmtime_r)) && !defined(OPENSSL_SYS_MACOSX) && !defined(OPENSSL_SYS_SUNOS)
-	/* should return &data, but doesn't on some systems,
-	   so we don't even look at the return value */
-	gmtime_r(timer,result);
-	ts = result;
-#elif !defined(OPENSSL_SYS_VMS)
-	ts = gmtime(timer);
-	if (ts == NULL)
-		return NULL;
-
-	memcpy(result, ts, sizeof(struct tm));
-	ts = result;
-#endif
-#ifdef OPENSSL_SYS_VMS
-	if (ts == NULL)
-		{
-		static $DESCRIPTOR(tabnam,"LNM$DCL_LOGICAL");
-		static $DESCRIPTOR(lognam,"SYS$TIMEZONE_DIFFERENTIAL");
-		char logvalue[256];
-		unsigned int reslen = 0;
-		struct {
-			short buflen;
-			short code;
-			void *bufaddr;
-			unsigned int *reslen;
-		} itemlist[] = {
-			{ 0, LNM$_STRING, 0, 0 },
-			{ 0, 0, 0, 0 },
-		};
-		int status;
-		time_t t;
-
-		/* Get the value for SYS$TIMEZONE_DIFFERENTIAL */
-		itemlist[0].buflen = sizeof(logvalue);
-		itemlist[0].bufaddr = logvalue;
-		itemlist[0].reslen = &reslen;
-		status = sys$trnlnm(0, &tabnam, &lognam, 0, itemlist);
-		if (!(status & 1))
-			return NULL;
-		logvalue[reslen] = '\0';
-
-		t = *timer;
-
-/* The following is extracted from the DEC C header time.h */
-/*
-**  Beginning in OpenVMS Version 7.0 mktime, time, ctime, strftime
-**  have two implementations.  One implementation is provided
-**  for compatibility and deals with time in terms of local time,
-**  the other __utc_* deals with time in terms of UTC.
-*/
-/* We use the same conditions as in said time.h to check if we should
-   assume that t contains local time (and should therefore be adjusted)
-   or UTC (and should therefore be left untouched). */
-#if __CRTL_VER < 70000000 || defined _VMS_V6_SOURCE
-		/* Get the numerical value of the equivalence string */
-		status = atoi(logvalue);
-
-		/* and use it to move time to GMT */
-		t -= status;
-#endif
-
-		/* then convert the result to the time structure */
-
-		/* Since there was no gmtime_r() to do this stuff for us,
-		   we have to do it the hard way. */
-		{
-		/* The VMS epoch is the astronomical Smithsonian date,
-		   if I remember correctly, which is November 17, 1858.
-		   Furthermore, time is measure in thenths of microseconds
-		   and stored in quadwords (64 bit integers).  unix_epoch
-		   below is January 1st 1970 expressed as a VMS time.  The
-		   following code was used to get this number:
-
-		   #include <stdio.h>
-		   #include <stdlib.h>
-		   #include <lib$routines.h>
-		   #include <starlet.h>
-
-		   main()
-		   {
-		     unsigned long systime[2];
-		     unsigned short epoch_values[7] =
-		       { 1970, 1, 1, 0, 0, 0, 0 };
-
-		     lib$cvt_vectim(epoch_values, systime);
-
-		     printf("%u %u", systime[0], systime[1]);
-		   }
-		*/
-		unsigned long unix_epoch[2] = { 1273708544, 8164711 };
-		unsigned long deltatime[2];
-		unsigned long systime[2];
-		struct vms_vectime
-			{
-			short year, month, day, hour, minute, second,
-				centi_second;
-			} time_values;
-		long operation;
-
-		/* Turn the number of seconds since January 1st 1970 to
-		   an internal delta time.
-		   Note that lib$cvt_to_internal_time() will assume
-		   that t is signed, and will therefore break on 32-bit
-		   systems some time in 2038.
-		*/
-		operation = LIB$K_DELTA_SECONDS;
-		status = lib$cvt_to_internal_time(&operation,
-			&t, deltatime);
-
-		/* Add the delta time with the Unix epoch and we have
-		   the current UTC time in internal format */
-		status = lib$add_times(unix_epoch, deltatime, systime);
-
-		/* Turn the internal time into a time vector */
-		status = sys$numtim(&time_values, systime);
-
-		/* Fill in the struct tm with the result */
-		result->tm_sec = time_values.second;
-		result->tm_min = time_values.minute;
-		result->tm_hour = time_values.hour;
-		result->tm_mday = time_values.day;
-		result->tm_mon = time_values.month - 1;
-		result->tm_year = time_values.year - 1900;
-
-		operation = LIB$K_DAY_OF_WEEK;
-		status = lib$cvt_from_internal_time(&operation,
-			&result->tm_wday, systime);
-		result->tm_wday %= 7;
-
-		operation = LIB$K_DAY_OF_YEAR;
-		status = lib$cvt_from_internal_time(&operation,
-			&result->tm_yday, systime);
-		result->tm_yday--;
-
-		result->tm_isdst = 0; /* There's no way to know... */
-
-		ts = result;
-		}
-		}
-#endif
-	return ts;
-	}	
diff --git a/crypto/openssl/crypto/o_time.h b/crypto/openssl/crypto/o_time.h
deleted file mode 100644
index e66044626d1f..000000000000
--- a/crypto/openssl/crypto/o_time.h
+++ /dev/null
@@ -1,66 +0,0 @@
-/* crypto/o_time.h -*- mode:C; c-file-style: "eay" -*- */
-/* Written by Richard Levitte (richard@levitte.org) for the OpenSSL
- * project 2001.
- */
-/* ====================================================================
- * Copyright (c) 2001 The OpenSSL Project.  All rights reserved.
- *
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions
- * are met:
- *
- * 1. Redistributions of source code must retain the above copyright
- *    notice, this list of conditions and the following disclaimer. 
- *
- * 2. Redistributions in binary form must reproduce the above copyright
- *    notice, this list of conditions and the following disclaimer in
- *    the documentation and/or other materials provided with the
- *    distribution.
- *
- * 3. All advertising materials mentioning features or use of this
- *    software must display the following acknowledgment:
- *    "This product includes software developed by the OpenSSL Project
- *    for use in the OpenSSL Toolkit. (http://www.OpenSSL.org/)"
- *
- * 4. The names "OpenSSL Toolkit" and "OpenSSL Project" must not be used to
- *    endorse or promote products derived from this software without
- *    prior written permission. For written permission, please contact
- *    licensing@OpenSSL.org.
- *
- * 5. Products derived from this software may not be called "OpenSSL"
- *    nor may "OpenSSL" appear in their names without prior written
- *    permission of the OpenSSL Project.
- *
- * 6. Redistributions of any form whatsoever must retain the following
- *    acknowledgment:
- *    "This product includes software developed by the OpenSSL Project
- *    for use in the OpenSSL Toolkit (http://www.OpenSSL.org/)"
- *
- * THIS SOFTWARE IS PROVIDED BY THE OpenSSL PROJECT ``AS IS'' AND ANY
- * EXPRESSED OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
- * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR
- * PURPOSE ARE DISCLAIMED.  IN NO EVENT SHALL THE OpenSSL PROJECT OR
- * ITS CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
- * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
- * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
- * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
- * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
- * STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
- * ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED
- * OF THE POSSIBILITY OF SUCH DAMAGE.
- * ====================================================================
- *
- * This product includes cryptographic software written by Eric Young
- * (eay@cryptsoft.com).  This product includes software written by Tim
- * Hudson (tjh@cryptsoft.com).
- *
- */
-
-#ifndef HEADER_O_TIME_H
-#define HEADER_O_TIME_H
-
-#include <time.h>
-
-struct tm *OPENSSL_gmtime(const time_t *timer, struct tm *result);
-
-#endif
diff --git a/crypto/openssl/crypto/objects/Makefile b/crypto/openssl/crypto/objects/Makefile
deleted file mode 100644
index 08af092914d9..000000000000
--- a/crypto/openssl/crypto/objects/Makefile
+++ /dev/null
@@ -1,119 +0,0 @@
-#
-# OpenSSL/crypto/objects/Makefile
-#
-
-DIR=	objects
-TOP=	../..
-CC=	cc
-INCLUDES= -I.. -I$(TOP) -I../../include
-CFLAG=-g
-MAKEFILE=	Makefile
-AR=		ar r
-PERL=		perl
-
-CFLAGS= $(INCLUDES) $(CFLAG)
-
-GENERAL=Makefile README
-TEST=
-APPS=
-
-LIB=$(TOP)/libcrypto.a
-LIBSRC=	o_names.c obj_dat.c obj_lib.c obj_err.c
-LIBOBJ= o_names.o obj_dat.o obj_lib.o obj_err.o
-
-SRC= $(LIBSRC)
-
-EXHEADER= objects.h obj_mac.h
-HEADER=	$(EXHEADER) obj_dat.h
-
-ALL=    $(GENERAL) $(SRC) $(HEADER)
-
-top:
-	(cd ../..; $(MAKE) DIRS=crypto SDIRS=$(DIR) sub_all)
-
-all:	obj_dat.h lib
-
-lib:	$(LIBOBJ)
-	$(AR) $(LIB) $(LIBOBJ)
-	$(RANLIB) $(LIB) || echo Never mind.
-	@touch lib
-
-obj_dat.h: obj_dat.pl obj_mac.h
-	$(PERL) obj_dat.pl obj_mac.h obj_dat.h
-
-# objects.pl both reads and writes obj_mac.num
-obj_mac.h: objects.pl objects.txt obj_mac.num
-	$(PERL) objects.pl objects.txt obj_mac.num obj_mac.h
-	@sleep 1; touch obj_mac.h; sleep 1
-
-files:
-	$(PERL) $(TOP)/util/files.pl Makefile >> $(TOP)/MINFO
-
-links:
-	@$(PERL) $(TOP)/util/mklink.pl ../../include/openssl $(EXHEADER)
-	@$(PERL) $(TOP)/util/mklink.pl ../../test $(TEST)
-	@$(PERL) $(TOP)/util/mklink.pl ../../apps $(APPS)
-
-install:
-	@[ -n "$(INSTALLTOP)" ] # should be set by top Makefile...
-	@headerlist="$(EXHEADER)"; for i in $$headerlist ; \
-	do  \
-	(cp $$i $(INSTALL_PREFIX)$(INSTALLTOP)/include/openssl/$$i; \
-	chmod 644 $(INSTALL_PREFIX)$(INSTALLTOP)/include/openssl/$$i ); \
-	done;
-
-tags:
-	ctags $(SRC)
-
-tests:
-
-lint:
-	lint -DLINT $(INCLUDES) $(SRC)>fluff
-
-depend:
-	@[ -n "$(MAKEDEPEND)" ] # should be set by upper Makefile...
-	$(MAKEDEPEND) -- $(CFLAG) $(INCLUDES) $(DEPFLAG) -- $(PROGS) $(LIBSRC)
-
-dclean:
-	$(PERL) -pe 'if (/^# DO NOT DELETE THIS LINE/) {print; exit(0);}' $(MAKEFILE) >Makefile.new
-	mv -f Makefile.new $(MAKEFILE)
-
-clean:
-	rm -f *.o *.obj lib tags core .pure .nfs* *.old *.bak fluff
-
-# DO NOT DELETE THIS LINE -- make depend depends on it.
-
-o_names.o: ../../include/openssl/asn1.h ../../include/openssl/bio.h
-o_names.o: ../../include/openssl/crypto.h ../../include/openssl/e_os2.h
-o_names.o: ../../include/openssl/err.h ../../include/openssl/lhash.h
-o_names.o: ../../include/openssl/obj_mac.h ../../include/openssl/objects.h
-o_names.o: ../../include/openssl/opensslconf.h ../../include/openssl/opensslv.h
-o_names.o: ../../include/openssl/ossl_typ.h ../../include/openssl/safestack.h
-o_names.o: ../../include/openssl/stack.h ../../include/openssl/symhacks.h
-o_names.o: o_names.c
-obj_dat.o: ../../e_os.h ../../include/openssl/asn1.h
-obj_dat.o: ../../include/openssl/bio.h ../../include/openssl/buffer.h
-obj_dat.o: ../../include/openssl/crypto.h ../../include/openssl/e_os2.h
-obj_dat.o: ../../include/openssl/err.h ../../include/openssl/lhash.h
-obj_dat.o: ../../include/openssl/obj_mac.h ../../include/openssl/objects.h
-obj_dat.o: ../../include/openssl/opensslconf.h ../../include/openssl/opensslv.h
-obj_dat.o: ../../include/openssl/ossl_typ.h ../../include/openssl/safestack.h
-obj_dat.o: ../../include/openssl/stack.h ../../include/openssl/symhacks.h
-obj_dat.o: ../cryptlib.h obj_dat.c obj_dat.h
-obj_err.o: ../../include/openssl/asn1.h ../../include/openssl/bio.h
-obj_err.o: ../../include/openssl/crypto.h ../../include/openssl/e_os2.h
-obj_err.o: ../../include/openssl/err.h ../../include/openssl/lhash.h
-obj_err.o: ../../include/openssl/obj_mac.h ../../include/openssl/objects.h
-obj_err.o: ../../include/openssl/opensslconf.h ../../include/openssl/opensslv.h
-obj_err.o: ../../include/openssl/ossl_typ.h ../../include/openssl/safestack.h
-obj_err.o: ../../include/openssl/stack.h ../../include/openssl/symhacks.h
-obj_err.o: obj_err.c
-obj_lib.o: ../../e_os.h ../../include/openssl/asn1.h
-obj_lib.o: ../../include/openssl/bio.h ../../include/openssl/buffer.h
-obj_lib.o: ../../include/openssl/crypto.h ../../include/openssl/e_os2.h
-obj_lib.o: ../../include/openssl/err.h ../../include/openssl/lhash.h
-obj_lib.o: ../../include/openssl/obj_mac.h ../../include/openssl/objects.h
-obj_lib.o: ../../include/openssl/opensslconf.h ../../include/openssl/opensslv.h
-obj_lib.o: ../../include/openssl/ossl_typ.h ../../include/openssl/safestack.h
-obj_lib.o: ../../include/openssl/stack.h ../../include/openssl/symhacks.h
-obj_lib.o: ../cryptlib.h obj_lib.c
diff --git a/crypto/openssl/crypto/objects/o_names.c b/crypto/openssl/crypto/objects/o_names.c
deleted file mode 100644
index adb5731f7659..000000000000
--- a/crypto/openssl/crypto/objects/o_names.c
+++ /dev/null
@@ -1,369 +0,0 @@
-#include <stdio.h>
-#include <stdlib.h>
-#include <string.h>
-
-#include <openssl/err.h>
-#include <openssl/lhash.h>
-#include <openssl/objects.h>
-#include <openssl/safestack.h>
-#include <openssl/e_os2.h>
-
-/* Later versions of DEC C has started to add lnkage information to certain
- * functions, which makes it tricky to use them as values to regular function
- * pointers.  One way is to define a macro that takes care of casting them
- * correctly.
- */
-#ifdef OPENSSL_SYS_VMS_DECC
-# define OPENSSL_strcmp (int (*)(const char *,const char *))strcmp
-#else
-# define OPENSSL_strcmp strcmp
-#endif
-
-/* I use the ex_data stuff to manage the identifiers for the obj_name_types
- * that applications may define.  I only really use the free function field.
- */
-static LHASH *names_lh=NULL;
-static int names_type_num=OBJ_NAME_TYPE_NUM;
-
-typedef struct name_funcs_st
-	{
-	unsigned long (*hash_func)(const char *name);
-	int (*cmp_func)(const char *a,const char *b);
-	void (*free_func)(const char *, int, const char *);
-	} NAME_FUNCS;
-
-DECLARE_STACK_OF(NAME_FUNCS)
-IMPLEMENT_STACK_OF(NAME_FUNCS)
-
-static STACK_OF(NAME_FUNCS) *name_funcs_stack;
-
-/* The LHASH callbacks now use the raw "void *" prototypes and do per-variable
- * casting in the functions. This prevents function pointer casting without the
- * need for macro-generated wrapper functions. */
-
-/* static unsigned long obj_name_hash(OBJ_NAME *a); */
-static unsigned long obj_name_hash(const void *a_void);
-/* static int obj_name_cmp(OBJ_NAME *a,OBJ_NAME *b); */
-static int obj_name_cmp(const void *a_void,const void *b_void);
-
-int OBJ_NAME_init(void)
-	{
-	if (names_lh != NULL) return(1);
-	MemCheck_off();
-	names_lh=lh_new(obj_name_hash, obj_name_cmp);
-	MemCheck_on();
-	return(names_lh != NULL);
-	}
-
-int OBJ_NAME_new_index(unsigned long (*hash_func)(const char *),
-	int (*cmp_func)(const char *, const char *),
-	void (*free_func)(const char *, int, const char *))
-	{
-	int ret;
-	int i;
-	NAME_FUNCS *name_funcs;
-
-	if (name_funcs_stack == NULL)
-		{
-		MemCheck_off();
-		name_funcs_stack=sk_NAME_FUNCS_new_null();
-		MemCheck_on();
-		}
-	if ((name_funcs_stack == NULL))
-		{
-		/* ERROR */
-		return(0);
-		}
-	ret=names_type_num;
-	names_type_num++;
-	for (i=sk_NAME_FUNCS_num(name_funcs_stack); i<names_type_num; i++)
-		{
-		MemCheck_off();
-		name_funcs = OPENSSL_malloc(sizeof(NAME_FUNCS));
-		MemCheck_on();
-		if (!name_funcs)
-			{
-			OBJerr(OBJ_F_OBJ_NAME_NEW_INDEX,ERR_R_MALLOC_FAILURE);
-			return(0);
-			}
-		name_funcs->hash_func = lh_strhash;
-		name_funcs->cmp_func = OPENSSL_strcmp;
-		name_funcs->free_func = 0; /* NULL is often declared to
-						* ((void *)0), which according
-						* to Compaq C is not really
-						* compatible with a function
-						* pointer.	-- Richard Levitte*/
-		MemCheck_off();
-		sk_NAME_FUNCS_push(name_funcs_stack,name_funcs);
-		MemCheck_on();
-		}
-	name_funcs = sk_NAME_FUNCS_value(name_funcs_stack, ret);
-	if (hash_func != NULL)
-		name_funcs->hash_func = hash_func;
-	if (cmp_func != NULL)
-		name_funcs->cmp_func = cmp_func;
-	if (free_func != NULL)
-		name_funcs->free_func = free_func;
-	return(ret);
-	}
-
-/* static int obj_name_cmp(OBJ_NAME *a, OBJ_NAME *b) */
-static int obj_name_cmp(const void *a_void, const void *b_void)
-	{
-	int ret;
-	const OBJ_NAME *a = (const OBJ_NAME *)a_void;
-	const OBJ_NAME *b = (const OBJ_NAME *)b_void;
-
-	ret=a->type-b->type;
-	if (ret == 0)
-		{
-		if ((name_funcs_stack != NULL)
-			&& (sk_NAME_FUNCS_num(name_funcs_stack) > a->type))
-			{
-			ret=sk_NAME_FUNCS_value(name_funcs_stack,
-				a->type)->cmp_func(a->name,b->name);
-			}
-		else
-			ret=strcmp(a->name,b->name);
-		}
-	return(ret);
-	}
-
-/* static unsigned long obj_name_hash(OBJ_NAME *a) */
-static unsigned long obj_name_hash(const void *a_void)
-	{
-	unsigned long ret;
-	const OBJ_NAME *a = (const OBJ_NAME *)a_void;
-
-	if ((name_funcs_stack != NULL) && (sk_NAME_FUNCS_num(name_funcs_stack) > a->type))
-		{
-		ret=sk_NAME_FUNCS_value(name_funcs_stack,
-			a->type)->hash_func(a->name);
-		}
-	else
-		{
-		ret=lh_strhash(a->name);
-		}
-	ret^=a->type;
-	return(ret);
-	}
-
-const char *OBJ_NAME_get(const char *name, int type)
-	{
-	OBJ_NAME on,*ret;
-	int num=0,alias;
-
-	if (name == NULL) return(NULL);
-	if ((names_lh == NULL) && !OBJ_NAME_init()) return(NULL);
-
-	alias=type&OBJ_NAME_ALIAS;
-	type&= ~OBJ_NAME_ALIAS;
-
-	on.name=name;
-	on.type=type;
-
-	for (;;)
-	{
-		ret=(OBJ_NAME *)lh_retrieve(names_lh,&on);
-		if (ret == NULL) return(NULL);
-		if ((ret->alias) && !alias)
-			{
-			if (++num > 10) return(NULL);
-			on.name=ret->data;
-			}
-		else
-			{
-			return(ret->data);
-			}
-		}
-	}
-
-int OBJ_NAME_add(const char *name, int type, const char *data)
-	{
-	OBJ_NAME *onp,*ret;
-	int alias;
-
-	if ((names_lh == NULL) && !OBJ_NAME_init()) return(0);
-
-	alias=type&OBJ_NAME_ALIAS;
-	type&= ~OBJ_NAME_ALIAS;
-
-	onp=(OBJ_NAME *)OPENSSL_malloc(sizeof(OBJ_NAME));
-	if (onp == NULL)
-		{
-		/* ERROR */
-		return(0);
-		}
-
-	onp->name=name;
-	onp->alias=alias;
-	onp->type=type;
-	onp->data=data;
-
-	ret=(OBJ_NAME *)lh_insert(names_lh,onp);
-	if (ret != NULL)
-		{
-		/* free things */
-		if ((name_funcs_stack != NULL) && (sk_NAME_FUNCS_num(name_funcs_stack) > ret->type))
-			{
-			/* XXX: I'm not sure I understand why the free
-			 * function should get three arguments...
-			 * -- Richard Levitte
-			 */
-			sk_NAME_FUNCS_value(name_funcs_stack,
-				ret->type)->free_func(ret->name,ret->type,ret->data);
-			}
-		OPENSSL_free(ret);
-		}
-	else
-		{
-		if (lh_error(names_lh))
-			{
-			/* ERROR */
-			return(0);
-			}
-		}
-	return(1);
-	}
-
-int OBJ_NAME_remove(const char *name, int type)
-	{
-	OBJ_NAME on,*ret;
-
-	if (names_lh == NULL) return(0);
-
-	type&= ~OBJ_NAME_ALIAS;
-	on.name=name;
-	on.type=type;
-	ret=(OBJ_NAME *)lh_delete(names_lh,&on);
-	if (ret != NULL)
-		{
-		/* free things */
-		if ((name_funcs_stack != NULL) && (sk_NAME_FUNCS_num(name_funcs_stack) > ret->type))
-			{
-			/* XXX: I'm not sure I understand why the free
-			 * function should get three arguments...
-			 * -- Richard Levitte
-			 */
-			sk_NAME_FUNCS_value(name_funcs_stack,
-				ret->type)->free_func(ret->name,ret->type,ret->data);
-			}
-		OPENSSL_free(ret);
-		return(1);
-		}
-	else
-		return(0);
-	}
-
-struct doall
-	{
-	int type;
-	void (*fn)(const OBJ_NAME *,void *arg);
-	void *arg;
-	};
-
-static void do_all_fn(const OBJ_NAME *name,struct doall *d)
-	{
-	if(name->type == d->type)
-		d->fn(name,d->arg);
-	}
-
-static IMPLEMENT_LHASH_DOALL_ARG_FN(do_all_fn, const OBJ_NAME *, struct doall *)
-
-void OBJ_NAME_do_all(int type,void (*fn)(const OBJ_NAME *,void *arg),void *arg)
-	{
-	struct doall d;
-
-	d.type=type;
-	d.fn=fn;
-	d.arg=arg;
-
-	lh_doall_arg(names_lh,LHASH_DOALL_ARG_FN(do_all_fn),&d);
-	}
-
-struct doall_sorted
-	{
-	int type;
-	int n;
-	const OBJ_NAME **names;
-	};
-
-static void do_all_sorted_fn(const OBJ_NAME *name,void *d_)
-	{
-	struct doall_sorted *d=d_;
-
-	if(name->type != d->type)
-		return;
-
-	d->names[d->n++]=name;
-	}
-
-static int do_all_sorted_cmp(const void *n1_,const void *n2_)
-	{
-	const OBJ_NAME * const *n1=n1_;
-	const OBJ_NAME * const *n2=n2_;
-
-	return strcmp((*n1)->name,(*n2)->name);
-	}
-
-void OBJ_NAME_do_all_sorted(int type,void (*fn)(const OBJ_NAME *,void *arg),
-				void *arg)
-	{
-	struct doall_sorted d;
-	int n;
-
-	d.type=type;
-	d.names=OPENSSL_malloc(lh_num_items(names_lh)*sizeof *d.names);
-	d.n=0;
-	OBJ_NAME_do_all(type,do_all_sorted_fn,&d);
-
-	qsort((void *)d.names,d.n,sizeof *d.names,do_all_sorted_cmp);
-
-	for(n=0 ; n < d.n ; ++n)
-		fn(d.names[n],arg);
-
-	OPENSSL_free((void *)d.names);
-	}
-
-static int free_type;
-
-static void names_lh_free(OBJ_NAME *onp)
-{
-	if(onp == NULL)
-		return;
-
-	if ((free_type < 0) || (free_type == onp->type))
-		{
-		OBJ_NAME_remove(onp->name,onp->type);
-		}
-	}
-
-static IMPLEMENT_LHASH_DOALL_FN(names_lh_free, OBJ_NAME *)
-
-static void name_funcs_free(NAME_FUNCS *ptr)
-	{
-	OPENSSL_free(ptr);
-	}
-
-void OBJ_NAME_cleanup(int type)
-	{
-	unsigned long down_load;
-
-	if (names_lh == NULL) return;
-
-	free_type=type;
-	down_load=names_lh->down_load;
-	names_lh->down_load=0;
-
-	lh_doall(names_lh,LHASH_DOALL_FN(names_lh_free));
-	if (type < 0)
-		{
-		lh_free(names_lh);
-		sk_NAME_FUNCS_pop_free(name_funcs_stack,name_funcs_free);
-		names_lh=NULL;
-		name_funcs_stack = NULL;
-		}
-	else
-		names_lh->down_load=down_load;
-	}
-
diff --git a/crypto/openssl/crypto/objects/obj_dat.c b/crypto/openssl/crypto/objects/obj_dat.c
deleted file mode 100644
index 7a95c7795a93..000000000000
--- a/crypto/openssl/crypto/objects/obj_dat.c
+++ /dev/null
@@ -1,785 +0,0 @@
-/* crypto/objects/obj_dat.c */
-/* Copyright (C) 1995-1998 Eric Young (eay@cryptsoft.com)
- * All rights reserved.
- *
- * This package is an SSL implementation written
- * by Eric Young (eay@cryptsoft.com).
- * The implementation was written so as to conform with Netscapes SSL.
- * 
- * This library is free for commercial and non-commercial use as long as
- * the following conditions are aheared to.  The following conditions
- * apply to all code found in this distribution, be it the RC4, RSA,
- * lhash, DES, etc., code; not just the SSL code.  The SSL documentation
- * included with this distribution is covered by the same copyright terms
- * except that the holder is Tim Hudson (tjh@cryptsoft.com).
- * 
- * Copyright remains Eric Young's, and as such any Copyright notices in
- * the code are not to be removed.
- * If this package is used in a product, Eric Young should be given attribution
- * as the author of the parts of the library used.
- * This can be in the form of a textual message at program startup or
- * in documentation (online or textual) provided with the package.
- * 
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions
- * are met:
- * 1. Redistributions of source code must retain the copyright
- *    notice, this list of conditions and the following disclaimer.
- * 2. Redistributions in binary form must reproduce the above copyright
- *    notice, this list of conditions and the following disclaimer in the
- *    documentation and/or other materials provided with the distribution.
- * 3. All advertising materials mentioning features or use of this software
- *    must display the following acknowledgement:
- *    "This product includes cryptographic software written by
- *     Eric Young (eay@cryptsoft.com)"
- *    The word 'cryptographic' can be left out if the rouines from the library
- *    being used are not cryptographic related :-).
- * 4. If you include any Windows specific code (or a derivative thereof) from 
- *    the apps directory (application code) you must include an acknowledgement:
- *    "This product includes software written by Tim Hudson (tjh@cryptsoft.com)"
- * 
- * THIS SOFTWARE IS PROVIDED BY ERIC YOUNG ``AS IS'' AND
- * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
- * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
- * ARE DISCLAIMED.  IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE
- * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
- * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
- * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
- * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
- * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
- * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
- * SUCH DAMAGE.
- * 
- * The licence and distribution terms for any publically available version or
- * derivative of this code cannot be changed.  i.e. this code cannot simply be
- * copied and put under another distribution licence
- * [including the GNU Public Licence.]
- */
-
-#include <stdio.h>
-#include <ctype.h>
-#include <limits.h>
-#include "cryptlib.h"
-#include <openssl/lhash.h>
-#include <openssl/asn1.h>
-#include <openssl/objects.h>
-
-/* obj_dat.h is generated from objects.h by obj_dat.pl */
-#ifndef OPENSSL_NO_OBJECT
-#include "obj_dat.h"
-#else
-/* You will have to load all the objects needed manually in the application */
-#define NUM_NID 0
-#define NUM_SN 0
-#define NUM_LN 0
-#define NUM_OBJ 0
-static unsigned char lvalues[1];
-static ASN1_OBJECT nid_objs[1];
-static ASN1_OBJECT *sn_objs[1];
-static ASN1_OBJECT *ln_objs[1];
-static ASN1_OBJECT *obj_objs[1];
-#endif
-
-static int sn_cmp(const void *a, const void *b);
-static int ln_cmp(const void *a, const void *b);
-static int obj_cmp(const void *a, const void *b);
-#define ADDED_DATA	0
-#define ADDED_SNAME	1
-#define ADDED_LNAME	2
-#define ADDED_NID	3
-
-typedef struct added_obj_st
-	{
-	int type;
-	ASN1_OBJECT *obj;
-	} ADDED_OBJ;
-
-static int new_nid=NUM_NID;
-static LHASH *added=NULL;
-
-static int sn_cmp(const void *a, const void *b)
-	{
-	const ASN1_OBJECT * const *ap = a, * const *bp = b;
-	return(strcmp((*ap)->sn,(*bp)->sn));
-	}
-
-static int ln_cmp(const void *a, const void *b)
-	{ 
-	const ASN1_OBJECT * const *ap = a, * const *bp = b;
-	return(strcmp((*ap)->ln,(*bp)->ln));
-	}
-
-/* static unsigned long add_hash(ADDED_OBJ *ca) */
-static unsigned long add_hash(const void *ca_void)
-	{
-	const ASN1_OBJECT *a;
-	int i;
-	unsigned long ret=0;
-	unsigned char *p;
-	const ADDED_OBJ *ca = (const ADDED_OBJ *)ca_void;
-
-	a=ca->obj;
-	switch (ca->type)
-		{
-	case ADDED_DATA:
-		ret=a->length<<20L;
-		p=(unsigned char *)a->data;
-		for (i=0; i<a->length; i++)
-			ret^=p[i]<<((i*3)%24);
-		break;
-	case ADDED_SNAME:
-		ret=lh_strhash(a->sn);
-		break;
-	case ADDED_LNAME:
-		ret=lh_strhash(a->ln);
-		break;
-	case ADDED_NID:
-		ret=a->nid;
-		break;
-	default:
-		/* abort(); */
-		return 0;
-		}
-	ret&=0x3fffffffL;
-	ret|=ca->type<<30L;
-	return(ret);
-	}
-
-/* static int add_cmp(ADDED_OBJ *ca, ADDED_OBJ *cb) */
-static int add_cmp(const void *ca_void, const void *cb_void)
-	{
-	ASN1_OBJECT *a,*b;
-	int i;
-	const ADDED_OBJ *ca = (const ADDED_OBJ *)ca_void;
-	const ADDED_OBJ *cb = (const ADDED_OBJ *)cb_void;
-
-	i=ca->type-cb->type;
-	if (i) return(i);
-	a=ca->obj;
-	b=cb->obj;
-	switch (ca->type)
-		{
-	case ADDED_DATA:
-		i=(a->length - b->length);
-		if (i) return(i);
-		return(memcmp(a->data,b->data,(size_t)a->length));
-	case ADDED_SNAME:
-		if (a->sn == NULL) return(-1);
-		else if (b->sn == NULL) return(1);
-		else return(strcmp(a->sn,b->sn));
-	case ADDED_LNAME:
-		if (a->ln == NULL) return(-1);
-		else if (b->ln == NULL) return(1);
-		else return(strcmp(a->ln,b->ln));
-	case ADDED_NID:
-		return(a->nid-b->nid);
-	default:
-		/* abort(); */
-		return 0;
-		}
-	}
-
-static int init_added(void)
-	{
-	if (added != NULL) return(1);
-	added=lh_new(add_hash,add_cmp);
-	return(added != NULL);
-	}
-
-static void cleanup1(ADDED_OBJ *a)
-	{
-	a->obj->nid=0;
-	a->obj->flags|=ASN1_OBJECT_FLAG_DYNAMIC|
-	                ASN1_OBJECT_FLAG_DYNAMIC_STRINGS|
-			ASN1_OBJECT_FLAG_DYNAMIC_DATA;
-	}
-
-static void cleanup2(ADDED_OBJ *a)
-	{ a->obj->nid++; }
-
-static void cleanup3(ADDED_OBJ *a)
-	{
-	if (--a->obj->nid == 0)
-		ASN1_OBJECT_free(a->obj);
-	OPENSSL_free(a);
-	}
-
-static IMPLEMENT_LHASH_DOALL_FN(cleanup1, ADDED_OBJ *)
-static IMPLEMENT_LHASH_DOALL_FN(cleanup2, ADDED_OBJ *)
-static IMPLEMENT_LHASH_DOALL_FN(cleanup3, ADDED_OBJ *)
-
-void OBJ_cleanup(void)
-	{
-	if (added == NULL) return;
-	added->down_load=0;
-	lh_doall(added,LHASH_DOALL_FN(cleanup1)); /* zero counters */
-	lh_doall(added,LHASH_DOALL_FN(cleanup2)); /* set counters */
-	lh_doall(added,LHASH_DOALL_FN(cleanup3)); /* free objects */
-	lh_free(added);
-	added=NULL;
-	}
-
-int OBJ_new_nid(int num)
-	{
-	int i;
-
-	i=new_nid;
-	new_nid+=num;
-	return(i);
-	}
-
-int OBJ_add_object(const ASN1_OBJECT *obj)
-	{
-	ASN1_OBJECT *o;
-	ADDED_OBJ *ao[4]={NULL,NULL,NULL,NULL},*aop;
-	int i;
-
-	if (added == NULL)
-		if (!init_added()) return(0);
-	if ((o=OBJ_dup(obj)) == NULL) goto err;
-	if (!(ao[ADDED_NID]=(ADDED_OBJ *)OPENSSL_malloc(sizeof(ADDED_OBJ)))) goto err2;
-	if ((o->length != 0) && (obj->data != NULL))
-		if (!(ao[ADDED_DATA]=(ADDED_OBJ *)OPENSSL_malloc(sizeof(ADDED_OBJ)))) goto err2;
-	if (o->sn != NULL)
-		if (!(ao[ADDED_SNAME]=(ADDED_OBJ *)OPENSSL_malloc(sizeof(ADDED_OBJ)))) goto err2;
-	if (o->ln != NULL)
-		if (!(ao[ADDED_LNAME]=(ADDED_OBJ *)OPENSSL_malloc(sizeof(ADDED_OBJ)))) goto err2;
-
-	for (i=ADDED_DATA; i<=ADDED_NID; i++)
-		{
-		if (ao[i] != NULL)
-			{
-			ao[i]->type=i;
-			ao[i]->obj=o;
-			aop=(ADDED_OBJ *)lh_insert(added,ao[i]);
-			/* memory leak, buit should not normally matter */
-			if (aop != NULL)
-				OPENSSL_free(aop);
-			}
-		}
-	o->flags&= ~(ASN1_OBJECT_FLAG_DYNAMIC|ASN1_OBJECT_FLAG_DYNAMIC_STRINGS|
-			ASN1_OBJECT_FLAG_DYNAMIC_DATA);
-
-	return(o->nid);
-err2:
-	OBJerr(OBJ_F_OBJ_ADD_OBJECT,ERR_R_MALLOC_FAILURE);
-err:
-	for (i=ADDED_DATA; i<=ADDED_NID; i++)
-		if (ao[i] != NULL) OPENSSL_free(ao[i]);
-	if (o != NULL) OPENSSL_free(o);
-	return(NID_undef);
-	}
-
-ASN1_OBJECT *OBJ_nid2obj(int n)
-	{
-	ADDED_OBJ ad,*adp;
-	ASN1_OBJECT ob;
-
-	if ((n >= 0) && (n < NUM_NID))
-		{
-		if ((n != NID_undef) && (nid_objs[n].nid == NID_undef))
-			{
-			OBJerr(OBJ_F_OBJ_NID2OBJ,OBJ_R_UNKNOWN_NID);
-			return(NULL);
-			}
-		return((ASN1_OBJECT *)&(nid_objs[n]));
-		}
-	else if (added == NULL)
-		return(NULL);
-	else
-		{
-		ad.type=ADDED_NID;
-		ad.obj= &ob;
-		ob.nid=n;
-		adp=(ADDED_OBJ *)lh_retrieve(added,&ad);
-		if (adp != NULL)
-			return(adp->obj);
-		else
-			{
-			OBJerr(OBJ_F_OBJ_NID2OBJ,OBJ_R_UNKNOWN_NID);
-			return(NULL);
-			}
-		}
-	}
-
-const char *OBJ_nid2sn(int n)
-	{
-	ADDED_OBJ ad,*adp;
-	ASN1_OBJECT ob;
-
-	if ((n >= 0) && (n < NUM_NID))
-		{
-		if ((n != NID_undef) && (nid_objs[n].nid == NID_undef))
-			{
-			OBJerr(OBJ_F_OBJ_NID2SN,OBJ_R_UNKNOWN_NID);
-			return(NULL);
-			}
-		return(nid_objs[n].sn);
-		}
-	else if (added == NULL)
-		return(NULL);
-	else
-		{
-		ad.type=ADDED_NID;
-		ad.obj= &ob;
-		ob.nid=n;
-		adp=(ADDED_OBJ *)lh_retrieve(added,&ad);
-		if (adp != NULL)
-			return(adp->obj->sn);
-		else
-			{
-			OBJerr(OBJ_F_OBJ_NID2SN,OBJ_R_UNKNOWN_NID);
-			return(NULL);
-			}
-		}
-	}
-
-const char *OBJ_nid2ln(int n)
-	{
-	ADDED_OBJ ad,*adp;
-	ASN1_OBJECT ob;
-
-	if ((n >= 0) && (n < NUM_NID))
-		{
-		if ((n != NID_undef) && (nid_objs[n].nid == NID_undef))
-			{
-			OBJerr(OBJ_F_OBJ_NID2LN,OBJ_R_UNKNOWN_NID);
-			return(NULL);
-			}
-		return(nid_objs[n].ln);
-		}
-	else if (added == NULL)
-		return(NULL);
-	else
-		{
-		ad.type=ADDED_NID;
-		ad.obj= &ob;
-		ob.nid=n;
-		adp=(ADDED_OBJ *)lh_retrieve(added,&ad);
-		if (adp != NULL)
-			return(adp->obj->ln);
-		else
-			{
-			OBJerr(OBJ_F_OBJ_NID2LN,OBJ_R_UNKNOWN_NID);
-			return(NULL);
-			}
-		}
-	}
-
-int OBJ_obj2nid(const ASN1_OBJECT *a)
-	{
-	ASN1_OBJECT **op;
-	ADDED_OBJ ad,*adp;
-
-	if (a == NULL)
-		return(NID_undef);
-	if (a->nid != 0)
-		return(a->nid);
-
-	if (added != NULL)
-		{
-		ad.type=ADDED_DATA;
-		ad.obj=(ASN1_OBJECT *)a; /* XXX: ugly but harmless */
-		adp=(ADDED_OBJ *)lh_retrieve(added,&ad);
-		if (adp != NULL) return (adp->obj->nid);
-		}
-	op=(ASN1_OBJECT **)OBJ_bsearch((const char *)&a,(const char *)obj_objs,
-		NUM_OBJ, sizeof(ASN1_OBJECT *),obj_cmp);
-	if (op == NULL)
-		return(NID_undef);
-	return((*op)->nid);
-	}
-
-/* Convert an object name into an ASN1_OBJECT
- * if "noname" is not set then search for short and long names first.
- * This will convert the "dotted" form into an object: unlike OBJ_txt2nid
- * it can be used with any objects, not just registered ones.
- */
-
-ASN1_OBJECT *OBJ_txt2obj(const char *s, int no_name)
-	{
-	int nid = NID_undef;
-	ASN1_OBJECT *op=NULL;
-	unsigned char *buf;
-	unsigned char *p;
-	const unsigned char *cp;
-	int i, j;
-
-	if(!no_name) {
-		if( ((nid = OBJ_sn2nid(s)) != NID_undef) ||
-			((nid = OBJ_ln2nid(s)) != NID_undef) ) 
-					return OBJ_nid2obj(nid);
-	}
-
-	/* Work out size of content octets */
-	i=a2d_ASN1_OBJECT(NULL,0,s,-1);
-	if (i <= 0) {
-		/* Don't clear the error */
-		/*ERR_clear_error();*/
-		return NULL;
-	}
-	/* Work out total size */
-	j = ASN1_object_size(0,i,V_ASN1_OBJECT);
-
-	if((buf=(unsigned char *)OPENSSL_malloc(j)) == NULL) return NULL;
-
-	p = buf;
-	/* Write out tag+length */
-	ASN1_put_object(&p,0,i,V_ASN1_OBJECT,V_ASN1_UNIVERSAL);
-	/* Write out contents */
-	a2d_ASN1_OBJECT(p,i,s,-1);
-
-	cp=buf;
-	op=d2i_ASN1_OBJECT(NULL,&cp,j);
-	OPENSSL_free(buf);
-	return op;
-	}
-
-int OBJ_obj2txt(char *buf, int buf_len, const ASN1_OBJECT *a, int no_name)
-{
-	int i,n=0,len,nid, first, use_bn;
-	BIGNUM *bl;
-	unsigned long l;
-	unsigned char *p;
-	char tbuf[DECIMAL_SIZE(i)+DECIMAL_SIZE(l)+2];
-
-	if ((a == NULL) || (a->data == NULL)) {
-		buf[0]='\0';
-		return(0);
-	}
-
-
-	if (!no_name && (nid=OBJ_obj2nid(a)) != NID_undef)
-		{
-		const char *s;
-		s=OBJ_nid2ln(nid);
-		if (s == NULL)
-			s=OBJ_nid2sn(nid);
-		if (buf)
-			BUF_strlcpy(buf,s,buf_len);
-		n=strlen(s);
-		return n;
-		}
-
-
-	len=a->length;
-	p=a->data;
-
-	first = 1;
-	bl = NULL;
-
-	while (len > 0)
-		{
-		l=0;
-		use_bn = 0;
-		for (;;)
-			{
-			unsigned char c = *p++;
-			len--;
-			if ((len == 0) && (c & 0x80))
-				goto err;
-			if (use_bn)
-				{
-				if (!BN_add_word(bl, c & 0x7f))
-					goto err;
-				}
-			else
-				l |= c  & 0x7f;
-			if (!(c & 0x80))
-				break;
-			if (!use_bn && (l > (ULONG_MAX >> 7L)))
-				{
-				if (!bl && !(bl = BN_new()))
-					goto err;
-				if (!BN_set_word(bl, l))
-					goto err;
-				use_bn = 1;
-				}
-			if (use_bn)
-				{
-				if (!BN_lshift(bl, bl, 7))
-					goto err;
-				}
-			else
-				l<<=7L;
-			}
-
-		if (first)
-			{
-			first = 0;
-			if (l >= 80)
-				{
-				i = 2;
-				if (use_bn)
-					{
-					if (!BN_sub_word(bl, 80))
-						goto err;
-					}
-				else
-					l -= 80;
-				}
-			else
-				{
-				i=(int)(l/40);
-				l-=(long)(i*40);
-				}
-			if (buf && (buf_len > 0))
-				{
-				*buf++ = i + '0';
-				buf_len--;
-				}
-			n++;
-			}
-
-		if (use_bn)
-			{
-			char *bndec;
-			bndec = BN_bn2dec(bl);
-			if (!bndec)
-				goto err;
-			i = strlen(bndec);
-			if (buf)
-				{
-				if (buf_len > 0)
-					{
-					*buf++ = '.';
-					buf_len--;
-					}
-				BUF_strlcpy(buf,bndec,buf_len);
-				if (i > buf_len)
-					{
-					buf += buf_len;
-					buf_len = 0;
-					}
-				else
-					{
-					buf+=i;
-					buf_len-=i;
-					}
-				}
-			n++;
-			n += i;
-			OPENSSL_free(bndec);
-			}
-		else
-			{
-			BIO_snprintf(tbuf,sizeof tbuf,".%lu",l);
-			i=strlen(tbuf);
-			if (buf && (buf_len > 0))
-				{
-				BUF_strlcpy(buf,tbuf,buf_len);
-				if (i > buf_len)
-					{
-					buf += buf_len;
-					buf_len = 0;
-					}
-				else
-					{
-					buf+=i;
-					buf_len-=i;
-					}
-				}
-			n+=i;
-			l=0;
-			}
-		}
-
-	if (bl)
-		BN_free(bl);
-	return n;
-
-	err:
-	if (bl)
-		BN_free(bl);
-	return -1;
-}
-
-int OBJ_txt2nid(const char *s)
-{
-	ASN1_OBJECT *obj;
-	int nid;
-	obj = OBJ_txt2obj(s, 0);
-	nid = OBJ_obj2nid(obj);
-	ASN1_OBJECT_free(obj);
-	return nid;
-}
-
-int OBJ_ln2nid(const char *s)
-	{
-	ASN1_OBJECT o,*oo= &o,**op;
-	ADDED_OBJ ad,*adp;
-
-	o.ln=s;
-	if (added != NULL)
-		{
-		ad.type=ADDED_LNAME;
-		ad.obj= &o;
-		adp=(ADDED_OBJ *)lh_retrieve(added,&ad);
-		if (adp != NULL) return (adp->obj->nid);
-		}
-	op=(ASN1_OBJECT **)OBJ_bsearch((char *)&oo,(char *)ln_objs, NUM_LN,
-		sizeof(ASN1_OBJECT *),ln_cmp);
-	if (op == NULL) return(NID_undef);
-	return((*op)->nid);
-	}
-
-int OBJ_sn2nid(const char *s)
-	{
-	ASN1_OBJECT o,*oo= &o,**op;
-	ADDED_OBJ ad,*adp;
-
-	o.sn=s;
-	if (added != NULL)
-		{
-		ad.type=ADDED_SNAME;
-		ad.obj= &o;
-		adp=(ADDED_OBJ *)lh_retrieve(added,&ad);
-		if (adp != NULL) return (adp->obj->nid);
-		}
-	op=(ASN1_OBJECT **)OBJ_bsearch((char *)&oo,(char *)sn_objs,NUM_SN,
-		sizeof(ASN1_OBJECT *),sn_cmp);
-	if (op == NULL) return(NID_undef);
-	return((*op)->nid);
-	}
-
-static int obj_cmp(const void *ap, const void *bp)
-	{
-	int j;
-	const ASN1_OBJECT *a= *(ASN1_OBJECT * const *)ap;
-	const ASN1_OBJECT *b= *(ASN1_OBJECT * const *)bp;
-
-	j=(a->length - b->length);
-        if (j) return(j);
-	return(memcmp(a->data,b->data,a->length));
-        }
-
-const char *OBJ_bsearch(const char *key, const char *base, int num, int size,
-	int (*cmp)(const void *, const void *))
-	{
-	return OBJ_bsearch_ex(key, base, num, size, cmp, 0);
-	}
-
-const char *OBJ_bsearch_ex(const char *key, const char *base, int num,
-	int size, int (*cmp)(const void *, const void *), int flags)
-	{
-	int l,h,i=0,c=0;
-	const char *p = NULL;
-
-	if (num == 0) return(NULL);
-	l=0;
-	h=num;
-	while (l < h)
-		{
-		i=(l+h)/2;
-		p= &(base[i*size]);
-		c=(*cmp)(key,p);
-		if (c < 0)
-			h=i;
-		else if (c > 0)
-			l=i+1;
-		else
-			break;
-		}
-#ifdef CHARSET_EBCDIC
-/* THIS IS A KLUDGE - Because the *_obj is sorted in ASCII order, and
- * I don't have perl (yet), we revert to a *LINEAR* search
- * when the object wasn't found in the binary search.
- */
-	if (c != 0)
-		{
-		for (i=0; i<num; ++i)
-			{
-			p= &(base[i*size]);
-			c = (*cmp)(key,p);
-			if (c == 0 || (c < 0 && (flags & OBJ_BSEARCH_VALUE_ON_NOMATCH)))
-				return p;
-			}
-		}
-#endif
-	if (c != 0 && !(flags & OBJ_BSEARCH_VALUE_ON_NOMATCH))
-		p = NULL;
-	else if (c == 0 && (flags & OBJ_BSEARCH_FIRST_VALUE_ON_MATCH))
-		{
-		while(i > 0 && (*cmp)(key,&(base[(i-1)*size])) == 0)
-			i--;
-		p = &(base[i*size]);
-		}
-	return(p);
-	}
-
-int OBJ_create_objects(BIO *in)
-	{
-	MS_STATIC char buf[512];
-	int i,num=0;
-	char *o,*s,*l=NULL;
-
-	for (;;)
-		{
-		s=o=NULL;
-		i=BIO_gets(in,buf,512);
-		if (i <= 0) return(num);
-		buf[i-1]='\0';
-		if (!isalnum((unsigned char)buf[0])) return(num);
-		o=s=buf;
-		while (isdigit((unsigned char)*s) || (*s == '.'))
-			s++;
-		if (*s != '\0')
-			{
-			*(s++)='\0';
-			while (isspace((unsigned char)*s))
-				s++;
-			if (*s == '\0')
-				s=NULL;
-			else
-				{
-				l=s;
-				while ((*l != '\0') && !isspace((unsigned char)*l))
-					l++;
-				if (*l != '\0')
-					{
-					*(l++)='\0';
-					while (isspace((unsigned char)*l))
-						l++;
-					if (*l == '\0') l=NULL;
-					}
-				else
-					l=NULL;
-				}
-			}
-		else
-			s=NULL;
-		if ((o == NULL) || (*o == '\0')) return(num);
-		if (!OBJ_create(o,s,l)) return(num);
-		num++;
-		}
-	/* return(num); */
-	}
-
-int OBJ_create(const char *oid, const char *sn, const char *ln)
-	{
-	int ok=0;
-	ASN1_OBJECT *op=NULL;
-	unsigned char *buf;
-	int i;
-
-	i=a2d_ASN1_OBJECT(NULL,0,oid,-1);
-	if (i <= 0) return(0);
-
-	if ((buf=(unsigned char *)OPENSSL_malloc(i)) == NULL)
-		{
-		OBJerr(OBJ_F_OBJ_CREATE,ERR_R_MALLOC_FAILURE);
-		return(0);
-		}
-	i=a2d_ASN1_OBJECT(buf,i,oid,-1);
-	if (i == 0)
-		goto err;
-	op=(ASN1_OBJECT *)ASN1_OBJECT_create(OBJ_new_nid(1),buf,i,sn,ln);
-	if (op == NULL) 
-		goto err;
-	ok=OBJ_add_object(op);
-err:
-	ASN1_OBJECT_free(op);
-	OPENSSL_free(buf);
-	return(ok);
-	}
-
diff --git a/crypto/openssl/crypto/objects/obj_dat.h b/crypto/openssl/crypto/objects/obj_dat.h
deleted file mode 100644
index a116bb7f28ab..000000000000
--- a/crypto/openssl/crypto/objects/obj_dat.h
+++ /dev/null
@@ -1,4269 +0,0 @@
-/* crypto/objects/obj_dat.h */
-
-/* THIS FILE IS GENERATED FROM objects.h by obj_dat.pl via the
- * following command:
- * perl obj_dat.pl obj_mac.h obj_dat.h
- */
-
-/* Copyright (C) 1995-1997 Eric Young (eay@cryptsoft.com)
- * All rights reserved.
- *
- * This package is an SSL implementation written
- * by Eric Young (eay@cryptsoft.com).
- * The implementation was written so as to conform with Netscapes SSL.
- * 
- * This library is free for commercial and non-commercial use as long as
- * the following conditions are aheared to.  The following conditions
- * apply to all code found in this distribution, be it the RC4, RSA,
- * lhash, DES, etc., code; not just the SSL code.  The SSL documentation
- * included with this distribution is covered by the same copyright terms
- * except that the holder is Tim Hudson (tjh@cryptsoft.com).
- * 
- * Copyright remains Eric Young's, and as such any Copyright notices in
- * the code are not to be removed.
- * If this package is used in a product, Eric Young should be given attribution
- * as the author of the parts of the library used.
- * This can be in the form of a textual message at program startup or
- * in documentation (online or textual) provided with the package.
- * 
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions
- * are met:
- * 1. Redistributions of source code must retain the copyright
- *    notice, this list of conditions and the following disclaimer.
- * 2. Redistributions in binary form must reproduce the above copyright
- *    notice, this list of conditions and the following disclaimer in the
- *    documentation and/or other materials provided with the distribution.
- * 3. All advertising materials mentioning features or use of this software
- *    must display the following acknowledgement:
- *    "This product includes cryptographic software written by
- *     Eric Young (eay@cryptsoft.com)"
- *    The word 'cryptographic' can be left out if the rouines from the library
- *    being used are not cryptographic related :-).
- * 4. If you include any Windows specific code (or a derivative thereof) from 
- *    the apps directory (application code) you must include an acknowledgement:
- *    "This product includes software written by Tim Hudson (tjh@cryptsoft.com)"
- * 
- * THIS SOFTWARE IS PROVIDED BY ERIC YOUNG ``AS IS'' AND
- * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
- * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
- * ARE DISCLAIMED.  IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE
- * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
- * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
- * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
- * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
- * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
- * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
- * SUCH DAMAGE.
- * 
- * The licence and distribution terms for any publically available version or
- * derivative of this code cannot be changed.  i.e. this code cannot simply be
- * copied and put under another distribution licence
- * [including the GNU Public Licence.]
- */
-
-#define NUM_NID 772
-#define NUM_SN 768
-#define NUM_LN 768
-#define NUM_OBJ 724
-
-static unsigned char lvalues[5116]={
-0x00,                                        /* [  0] OBJ_undef */
-0x2A,0x86,0x48,0x86,0xF7,0x0D,               /* [  1] OBJ_rsadsi */
-0x2A,0x86,0x48,0x86,0xF7,0x0D,0x01,          /* [  7] OBJ_pkcs */
-0x2A,0x86,0x48,0x86,0xF7,0x0D,0x02,0x02,     /* [ 14] OBJ_md2 */
-0x2A,0x86,0x48,0x86,0xF7,0x0D,0x02,0x05,     /* [ 22] OBJ_md5 */
-0x2A,0x86,0x48,0x86,0xF7,0x0D,0x03,0x04,     /* [ 30] OBJ_rc4 */
-0x2A,0x86,0x48,0x86,0xF7,0x0D,0x01,0x01,0x01,/* [ 38] OBJ_rsaEncryption */
-0x2A,0x86,0x48,0x86,0xF7,0x0D,0x01,0x01,0x02,/* [ 47] OBJ_md2WithRSAEncryption */
-0x2A,0x86,0x48,0x86,0xF7,0x0D,0x01,0x01,0x04,/* [ 56] OBJ_md5WithRSAEncryption */
-0x2A,0x86,0x48,0x86,0xF7,0x0D,0x01,0x05,0x01,/* [ 65] OBJ_pbeWithMD2AndDES_CBC */
-0x2A,0x86,0x48,0x86,0xF7,0x0D,0x01,0x05,0x03,/* [ 74] OBJ_pbeWithMD5AndDES_CBC */
-0x55,                                        /* [ 83] OBJ_X500 */
-0x55,0x04,                                   /* [ 84] OBJ_X509 */
-0x55,0x04,0x03,                              /* [ 86] OBJ_commonName */
-0x55,0x04,0x06,                              /* [ 89] OBJ_countryName */
-0x55,0x04,0x07,                              /* [ 92] OBJ_localityName */
-0x55,0x04,0x08,                              /* [ 95] OBJ_stateOrProvinceName */
-0x55,0x04,0x0A,                              /* [ 98] OBJ_organizationName */
-0x55,0x04,0x0B,                              /* [101] OBJ_organizationalUnitName */
-0x55,0x08,0x01,0x01,                         /* [104] OBJ_rsa */
-0x2A,0x86,0x48,0x86,0xF7,0x0D,0x01,0x07,     /* [108] OBJ_pkcs7 */
-0x2A,0x86,0x48,0x86,0xF7,0x0D,0x01,0x07,0x01,/* [116] OBJ_pkcs7_data */
-0x2A,0x86,0x48,0x86,0xF7,0x0D,0x01,0x07,0x02,/* [125] OBJ_pkcs7_signed */
-0x2A,0x86,0x48,0x86,0xF7,0x0D,0x01,0x07,0x03,/* [134] OBJ_pkcs7_enveloped */
-0x2A,0x86,0x48,0x86,0xF7,0x0D,0x01,0x07,0x04,/* [143] OBJ_pkcs7_signedAndEnveloped */
-0x2A,0x86,0x48,0x86,0xF7,0x0D,0x01,0x07,0x05,/* [152] OBJ_pkcs7_digest */
-0x2A,0x86,0x48,0x86,0xF7,0x0D,0x01,0x07,0x06,/* [161] OBJ_pkcs7_encrypted */
-0x2A,0x86,0x48,0x86,0xF7,0x0D,0x01,0x03,     /* [170] OBJ_pkcs3 */
-0x2A,0x86,0x48,0x86,0xF7,0x0D,0x01,0x03,0x01,/* [178] OBJ_dhKeyAgreement */
-0x2B,0x0E,0x03,0x02,0x06,                    /* [187] OBJ_des_ecb */
-0x2B,0x0E,0x03,0x02,0x09,                    /* [192] OBJ_des_cfb64 */
-0x2B,0x0E,0x03,0x02,0x07,                    /* [197] OBJ_des_cbc */
-0x2B,0x0E,0x03,0x02,0x11,                    /* [202] OBJ_des_ede_ecb */
-0x2B,0x06,0x01,0x04,0x01,0x81,0x3C,0x07,0x01,0x01,0x02,/* [207] OBJ_idea_cbc */
-0x2A,0x86,0x48,0x86,0xF7,0x0D,0x03,0x02,     /* [218] OBJ_rc2_cbc */
-0x2B,0x0E,0x03,0x02,0x12,                    /* [226] OBJ_sha */
-0x2B,0x0E,0x03,0x02,0x0F,                    /* [231] OBJ_shaWithRSAEncryption */
-0x2A,0x86,0x48,0x86,0xF7,0x0D,0x03,0x07,     /* [236] OBJ_des_ede3_cbc */
-0x2B,0x0E,0x03,0x02,0x08,                    /* [244] OBJ_des_ofb64 */
-0x2A,0x86,0x48,0x86,0xF7,0x0D,0x01,0x09,     /* [249] OBJ_pkcs9 */
-0x2A,0x86,0x48,0x86,0xF7,0x0D,0x01,0x09,0x01,/* [257] OBJ_pkcs9_emailAddress */
-0x2A,0x86,0x48,0x86,0xF7,0x0D,0x01,0x09,0x02,/* [266] OBJ_pkcs9_unstructuredName */
-0x2A,0x86,0x48,0x86,0xF7,0x0D,0x01,0x09,0x03,/* [275] OBJ_pkcs9_contentType */
-0x2A,0x86,0x48,0x86,0xF7,0x0D,0x01,0x09,0x04,/* [284] OBJ_pkcs9_messageDigest */
-0x2A,0x86,0x48,0x86,0xF7,0x0D,0x01,0x09,0x05,/* [293] OBJ_pkcs9_signingTime */
-0x2A,0x86,0x48,0x86,0xF7,0x0D,0x01,0x09,0x06,/* [302] OBJ_pkcs9_countersignature */
-0x2A,0x86,0x48,0x86,0xF7,0x0D,0x01,0x09,0x07,/* [311] OBJ_pkcs9_challengePassword */
-0x2A,0x86,0x48,0x86,0xF7,0x0D,0x01,0x09,0x08,/* [320] OBJ_pkcs9_unstructuredAddress */
-0x2A,0x86,0x48,0x86,0xF7,0x0D,0x01,0x09,0x09,/* [329] OBJ_pkcs9_extCertAttributes */
-0x60,0x86,0x48,0x01,0x86,0xF8,0x42,          /* [338] OBJ_netscape */
-0x60,0x86,0x48,0x01,0x86,0xF8,0x42,0x01,     /* [345] OBJ_netscape_cert_extension */
-0x60,0x86,0x48,0x01,0x86,0xF8,0x42,0x02,     /* [353] OBJ_netscape_data_type */
-0x2B,0x0E,0x03,0x02,0x1A,                    /* [361] OBJ_sha1 */
-0x2A,0x86,0x48,0x86,0xF7,0x0D,0x01,0x01,0x05,/* [366] OBJ_sha1WithRSAEncryption */
-0x2B,0x0E,0x03,0x02,0x0D,                    /* [375] OBJ_dsaWithSHA */
-0x2B,0x0E,0x03,0x02,0x0C,                    /* [380] OBJ_dsa_2 */
-0x2A,0x86,0x48,0x86,0xF7,0x0D,0x01,0x05,0x0B,/* [385] OBJ_pbeWithSHA1AndRC2_CBC */
-0x2A,0x86,0x48,0x86,0xF7,0x0D,0x01,0x05,0x0C,/* [394] OBJ_id_pbkdf2 */
-0x2B,0x0E,0x03,0x02,0x1B,                    /* [403] OBJ_dsaWithSHA1_2 */
-0x60,0x86,0x48,0x01,0x86,0xF8,0x42,0x01,0x01,/* [408] OBJ_netscape_cert_type */
-0x60,0x86,0x48,0x01,0x86,0xF8,0x42,0x01,0x02,/* [417] OBJ_netscape_base_url */
-0x60,0x86,0x48,0x01,0x86,0xF8,0x42,0x01,0x03,/* [426] OBJ_netscape_revocation_url */
-0x60,0x86,0x48,0x01,0x86,0xF8,0x42,0x01,0x04,/* [435] OBJ_netscape_ca_revocation_url */
-0x60,0x86,0x48,0x01,0x86,0xF8,0x42,0x01,0x07,/* [444] OBJ_netscape_renewal_url */
-0x60,0x86,0x48,0x01,0x86,0xF8,0x42,0x01,0x08,/* [453] OBJ_netscape_ca_policy_url */
-0x60,0x86,0x48,0x01,0x86,0xF8,0x42,0x01,0x0C,/* [462] OBJ_netscape_ssl_server_name */
-0x60,0x86,0x48,0x01,0x86,0xF8,0x42,0x01,0x0D,/* [471] OBJ_netscape_comment */
-0x60,0x86,0x48,0x01,0x86,0xF8,0x42,0x02,0x05,/* [480] OBJ_netscape_cert_sequence */
-0x55,0x1D,                                   /* [489] OBJ_id_ce */
-0x55,0x1D,0x0E,                              /* [491] OBJ_subject_key_identifier */
-0x55,0x1D,0x0F,                              /* [494] OBJ_key_usage */
-0x55,0x1D,0x10,                              /* [497] OBJ_private_key_usage_period */
-0x55,0x1D,0x11,                              /* [500] OBJ_subject_alt_name */
-0x55,0x1D,0x12,                              /* [503] OBJ_issuer_alt_name */
-0x55,0x1D,0x13,                              /* [506] OBJ_basic_constraints */
-0x55,0x1D,0x14,                              /* [509] OBJ_crl_number */
-0x55,0x1D,0x20,                              /* [512] OBJ_certificate_policies */
-0x55,0x1D,0x23,                              /* [515] OBJ_authority_key_identifier */
-0x2B,0x06,0x01,0x04,0x01,0x97,0x55,0x01,0x02,/* [518] OBJ_bf_cbc */
-0x55,0x08,0x03,0x65,                         /* [527] OBJ_mdc2 */
-0x55,0x08,0x03,0x64,                         /* [531] OBJ_mdc2WithRSA */
-0x55,0x04,0x2A,                              /* [535] OBJ_givenName */
-0x55,0x04,0x04,                              /* [538] OBJ_surname */
-0x55,0x04,0x2B,                              /* [541] OBJ_initials */
-0x55,0x1D,0x1F,                              /* [544] OBJ_crl_distribution_points */
-0x2B,0x0E,0x03,0x02,0x03,                    /* [547] OBJ_md5WithRSA */
-0x55,0x04,0x05,                              /* [552] OBJ_serialNumber */
-0x55,0x04,0x0C,                              /* [555] OBJ_title */
-0x55,0x04,0x0D,                              /* [558] OBJ_description */
-0x2A,0x86,0x48,0x86,0xF6,0x7D,0x07,0x42,0x0A,/* [561] OBJ_cast5_cbc */
-0x2A,0x86,0x48,0x86,0xF6,0x7D,0x07,0x42,0x0C,/* [570] OBJ_pbeWithMD5AndCast5_CBC */
-0x2A,0x86,0x48,0xCE,0x38,0x04,0x03,          /* [579] OBJ_dsaWithSHA1 */
-0x2B,0x0E,0x03,0x02,0x1D,                    /* [586] OBJ_sha1WithRSA */
-0x2A,0x86,0x48,0xCE,0x38,0x04,0x01,          /* [591] OBJ_dsa */
-0x2B,0x24,0x03,0x02,0x01,                    /* [598] OBJ_ripemd160 */
-0x2B,0x24,0x03,0x03,0x01,0x02,               /* [603] OBJ_ripemd160WithRSA */
-0x2A,0x86,0x48,0x86,0xF7,0x0D,0x03,0x08,     /* [609] OBJ_rc5_cbc */
-0x29,0x01,0x01,0x85,0x1A,0x01,               /* [617] OBJ_rle_compression */
-0x29,0x01,0x01,0x85,0x1A,0x02,               /* [623] OBJ_zlib_compression */
-0x55,0x1D,0x25,                              /* [629] OBJ_ext_key_usage */
-0x2B,0x06,0x01,0x05,0x05,0x07,               /* [632] OBJ_id_pkix */
-0x2B,0x06,0x01,0x05,0x05,0x07,0x03,          /* [638] OBJ_id_kp */
-0x2B,0x06,0x01,0x05,0x05,0x07,0x03,0x01,     /* [645] OBJ_server_auth */
-0x2B,0x06,0x01,0x05,0x05,0x07,0x03,0x02,     /* [653] OBJ_client_auth */
-0x2B,0x06,0x01,0x05,0x05,0x07,0x03,0x03,     /* [661] OBJ_code_sign */
-0x2B,0x06,0x01,0x05,0x05,0x07,0x03,0x04,     /* [669] OBJ_email_protect */
-0x2B,0x06,0x01,0x05,0x05,0x07,0x03,0x08,     /* [677] OBJ_time_stamp */
-0x2B,0x06,0x01,0x04,0x01,0x82,0x37,0x02,0x01,0x15,/* [685] OBJ_ms_code_ind */
-0x2B,0x06,0x01,0x04,0x01,0x82,0x37,0x02,0x01,0x16,/* [695] OBJ_ms_code_com */
-0x2B,0x06,0x01,0x04,0x01,0x82,0x37,0x0A,0x03,0x01,/* [705] OBJ_ms_ctl_sign */
-0x2B,0x06,0x01,0x04,0x01,0x82,0x37,0x0A,0x03,0x03,/* [715] OBJ_ms_sgc */
-0x2B,0x06,0x01,0x04,0x01,0x82,0x37,0x0A,0x03,0x04,/* [725] OBJ_ms_efs */
-0x60,0x86,0x48,0x01,0x86,0xF8,0x42,0x04,0x01,/* [735] OBJ_ns_sgc */
-0x55,0x1D,0x1B,                              /* [744] OBJ_delta_crl */
-0x55,0x1D,0x15,                              /* [747] OBJ_crl_reason */
-0x55,0x1D,0x18,                              /* [750] OBJ_invalidity_date */
-0x2B,0x65,0x01,0x04,0x01,                    /* [753] OBJ_sxnet */
-0x2A,0x86,0x48,0x86,0xF7,0x0D,0x01,0x0C,0x01,0x01,/* [758] OBJ_pbe_WithSHA1And128BitRC4 */
-0x2A,0x86,0x48,0x86,0xF7,0x0D,0x01,0x0C,0x01,0x02,/* [768] OBJ_pbe_WithSHA1And40BitRC4 */
-0x2A,0x86,0x48,0x86,0xF7,0x0D,0x01,0x0C,0x01,0x03,/* [778] OBJ_pbe_WithSHA1And3_Key_TripleDES_CBC */
-0x2A,0x86,0x48,0x86,0xF7,0x0D,0x01,0x0C,0x01,0x04,/* [788] OBJ_pbe_WithSHA1And2_Key_TripleDES_CBC */
-0x2A,0x86,0x48,0x86,0xF7,0x0D,0x01,0x0C,0x01,0x05,/* [798] OBJ_pbe_WithSHA1And128BitRC2_CBC */
-0x2A,0x86,0x48,0x86,0xF7,0x0D,0x01,0x0C,0x01,0x06,/* [808] OBJ_pbe_WithSHA1And40BitRC2_CBC */
-0x2A,0x86,0x48,0x86,0xF7,0x0D,0x01,0x0C,0x0A,0x01,0x01,/* [818] OBJ_keyBag */
-0x2A,0x86,0x48,0x86,0xF7,0x0D,0x01,0x0C,0x0A,0x01,0x02,/* [829] OBJ_pkcs8ShroudedKeyBag */
-0x2A,0x86,0x48,0x86,0xF7,0x0D,0x01,0x0C,0x0A,0x01,0x03,/* [840] OBJ_certBag */
-0x2A,0x86,0x48,0x86,0xF7,0x0D,0x01,0x0C,0x0A,0x01,0x04,/* [851] OBJ_crlBag */
-0x2A,0x86,0x48,0x86,0xF7,0x0D,0x01,0x0C,0x0A,0x01,0x05,/* [862] OBJ_secretBag */
-0x2A,0x86,0x48,0x86,0xF7,0x0D,0x01,0x0C,0x0A,0x01,0x06,/* [873] OBJ_safeContentsBag */
-0x2A,0x86,0x48,0x86,0xF7,0x0D,0x01,0x09,0x14,/* [884] OBJ_friendlyName */
-0x2A,0x86,0x48,0x86,0xF7,0x0D,0x01,0x09,0x15,/* [893] OBJ_localKeyID */
-0x2A,0x86,0x48,0x86,0xF7,0x0D,0x01,0x09,0x16,0x01,/* [902] OBJ_x509Certificate */
-0x2A,0x86,0x48,0x86,0xF7,0x0D,0x01,0x09,0x16,0x02,/* [912] OBJ_sdsiCertificate */
-0x2A,0x86,0x48,0x86,0xF7,0x0D,0x01,0x09,0x17,0x01,/* [922] OBJ_x509Crl */
-0x2A,0x86,0x48,0x86,0xF7,0x0D,0x01,0x05,0x0D,/* [932] OBJ_pbes2 */
-0x2A,0x86,0x48,0x86,0xF7,0x0D,0x01,0x05,0x0E,/* [941] OBJ_pbmac1 */
-0x2A,0x86,0x48,0x86,0xF7,0x0D,0x02,0x07,     /* [950] OBJ_hmacWithSHA1 */
-0x2B,0x06,0x01,0x05,0x05,0x07,0x02,0x01,     /* [958] OBJ_id_qt_cps */
-0x2B,0x06,0x01,0x05,0x05,0x07,0x02,0x02,     /* [966] OBJ_id_qt_unotice */
-0x2A,0x86,0x48,0x86,0xF7,0x0D,0x01,0x09,0x0F,/* [974] OBJ_SMIMECapabilities */
-0x2A,0x86,0x48,0x86,0xF7,0x0D,0x01,0x05,0x04,/* [983] OBJ_pbeWithMD2AndRC2_CBC */
-0x2A,0x86,0x48,0x86,0xF7,0x0D,0x01,0x05,0x06,/* [992] OBJ_pbeWithMD5AndRC2_CBC */
-0x2A,0x86,0x48,0x86,0xF7,0x0D,0x01,0x05,0x0A,/* [1001] OBJ_pbeWithSHA1AndDES_CBC */
-0x2B,0x06,0x01,0x04,0x01,0x82,0x37,0x02,0x01,0x0E,/* [1010] OBJ_ms_ext_req */
-0x2A,0x86,0x48,0x86,0xF7,0x0D,0x01,0x09,0x0E,/* [1020] OBJ_ext_req */
-0x55,0x04,0x29,                              /* [1029] OBJ_name */
-0x55,0x04,0x2E,                              /* [1032] OBJ_dnQualifier */
-0x2B,0x06,0x01,0x05,0x05,0x07,0x01,          /* [1035] OBJ_id_pe */
-0x2B,0x06,0x01,0x05,0x05,0x07,0x30,          /* [1042] OBJ_id_ad */
-0x2B,0x06,0x01,0x05,0x05,0x07,0x01,0x01,     /* [1049] OBJ_info_access */
-0x2B,0x06,0x01,0x05,0x05,0x07,0x30,0x01,     /* [1057] OBJ_ad_OCSP */
-0x2B,0x06,0x01,0x05,0x05,0x07,0x30,0x02,     /* [1065] OBJ_ad_ca_issuers */
-0x2B,0x06,0x01,0x05,0x05,0x07,0x03,0x09,     /* [1073] OBJ_OCSP_sign */
-0x28,                                        /* [1081] OBJ_iso */
-0x2A,                                        /* [1082] OBJ_member_body */
-0x2A,0x86,0x48,                              /* [1083] OBJ_ISO_US */
-0x2A,0x86,0x48,0xCE,0x38,                    /* [1086] OBJ_X9_57 */
-0x2A,0x86,0x48,0xCE,0x38,0x04,               /* [1091] OBJ_X9cm */
-0x2A,0x86,0x48,0x86,0xF7,0x0D,0x01,0x01,     /* [1097] OBJ_pkcs1 */
-0x2A,0x86,0x48,0x86,0xF7,0x0D,0x01,0x05,     /* [1105] OBJ_pkcs5 */
-0x2A,0x86,0x48,0x86,0xF7,0x0D,0x01,0x09,0x10,/* [1113] OBJ_SMIME */
-0x2A,0x86,0x48,0x86,0xF7,0x0D,0x01,0x09,0x10,0x00,/* [1122] OBJ_id_smime_mod */
-0x2A,0x86,0x48,0x86,0xF7,0x0D,0x01,0x09,0x10,0x01,/* [1132] OBJ_id_smime_ct */
-0x2A,0x86,0x48,0x86,0xF7,0x0D,0x01,0x09,0x10,0x02,/* [1142] OBJ_id_smime_aa */
-0x2A,0x86,0x48,0x86,0xF7,0x0D,0x01,0x09,0x10,0x03,/* [1152] OBJ_id_smime_alg */
-0x2A,0x86,0x48,0x86,0xF7,0x0D,0x01,0x09,0x10,0x04,/* [1162] OBJ_id_smime_cd */
-0x2A,0x86,0x48,0x86,0xF7,0x0D,0x01,0x09,0x10,0x05,/* [1172] OBJ_id_smime_spq */
-0x2A,0x86,0x48,0x86,0xF7,0x0D,0x01,0x09,0x10,0x06,/* [1182] OBJ_id_smime_cti */
-0x2A,0x86,0x48,0x86,0xF7,0x0D,0x01,0x09,0x10,0x00,0x01,/* [1192] OBJ_id_smime_mod_cms */
-0x2A,0x86,0x48,0x86,0xF7,0x0D,0x01,0x09,0x10,0x00,0x02,/* [1203] OBJ_id_smime_mod_ess */
-0x2A,0x86,0x48,0x86,0xF7,0x0D,0x01,0x09,0x10,0x00,0x03,/* [1214] OBJ_id_smime_mod_oid */
-0x2A,0x86,0x48,0x86,0xF7,0x0D,0x01,0x09,0x10,0x00,0x04,/* [1225] OBJ_id_smime_mod_msg_v3 */
-0x2A,0x86,0x48,0x86,0xF7,0x0D,0x01,0x09,0x10,0x00,0x05,/* [1236] OBJ_id_smime_mod_ets_eSignature_88 */
-0x2A,0x86,0x48,0x86,0xF7,0x0D,0x01,0x09,0x10,0x00,0x06,/* [1247] OBJ_id_smime_mod_ets_eSignature_97 */
-0x2A,0x86,0x48,0x86,0xF7,0x0D,0x01,0x09,0x10,0x00,0x07,/* [1258] OBJ_id_smime_mod_ets_eSigPolicy_88 */
-0x2A,0x86,0x48,0x86,0xF7,0x0D,0x01,0x09,0x10,0x00,0x08,/* [1269] OBJ_id_smime_mod_ets_eSigPolicy_97 */
-0x2A,0x86,0x48,0x86,0xF7,0x0D,0x01,0x09,0x10,0x01,0x01,/* [1280] OBJ_id_smime_ct_receipt */
-0x2A,0x86,0x48,0x86,0xF7,0x0D,0x01,0x09,0x10,0x01,0x02,/* [1291] OBJ_id_smime_ct_authData */
-0x2A,0x86,0x48,0x86,0xF7,0x0D,0x01,0x09,0x10,0x01,0x03,/* [1302] OBJ_id_smime_ct_publishCert */
-0x2A,0x86,0x48,0x86,0xF7,0x0D,0x01,0x09,0x10,0x01,0x04,/* [1313] OBJ_id_smime_ct_TSTInfo */
-0x2A,0x86,0x48,0x86,0xF7,0x0D,0x01,0x09,0x10,0x01,0x05,/* [1324] OBJ_id_smime_ct_TDTInfo */
-0x2A,0x86,0x48,0x86,0xF7,0x0D,0x01,0x09,0x10,0x01,0x06,/* [1335] OBJ_id_smime_ct_contentInfo */
-0x2A,0x86,0x48,0x86,0xF7,0x0D,0x01,0x09,0x10,0x01,0x07,/* [1346] OBJ_id_smime_ct_DVCSRequestData */
-0x2A,0x86,0x48,0x86,0xF7,0x0D,0x01,0x09,0x10,0x01,0x08,/* [1357] OBJ_id_smime_ct_DVCSResponseData */
-0x2A,0x86,0x48,0x86,0xF7,0x0D,0x01,0x09,0x10,0x02,0x01,/* [1368] OBJ_id_smime_aa_receiptRequest */
-0x2A,0x86,0x48,0x86,0xF7,0x0D,0x01,0x09,0x10,0x02,0x02,/* [1379] OBJ_id_smime_aa_securityLabel */
-0x2A,0x86,0x48,0x86,0xF7,0x0D,0x01,0x09,0x10,0x02,0x03,/* [1390] OBJ_id_smime_aa_mlExpandHistory */
-0x2A,0x86,0x48,0x86,0xF7,0x0D,0x01,0x09,0x10,0x02,0x04,/* [1401] OBJ_id_smime_aa_contentHint */
-0x2A,0x86,0x48,0x86,0xF7,0x0D,0x01,0x09,0x10,0x02,0x05,/* [1412] OBJ_id_smime_aa_msgSigDigest */
-0x2A,0x86,0x48,0x86,0xF7,0x0D,0x01,0x09,0x10,0x02,0x06,/* [1423] OBJ_id_smime_aa_encapContentType */
-0x2A,0x86,0x48,0x86,0xF7,0x0D,0x01,0x09,0x10,0x02,0x07,/* [1434] OBJ_id_smime_aa_contentIdentifier */
-0x2A,0x86,0x48,0x86,0xF7,0x0D,0x01,0x09,0x10,0x02,0x08,/* [1445] OBJ_id_smime_aa_macValue */
-0x2A,0x86,0x48,0x86,0xF7,0x0D,0x01,0x09,0x10,0x02,0x09,/* [1456] OBJ_id_smime_aa_equivalentLabels */
-0x2A,0x86,0x48,0x86,0xF7,0x0D,0x01,0x09,0x10,0x02,0x0A,/* [1467] OBJ_id_smime_aa_contentReference */
-0x2A,0x86,0x48,0x86,0xF7,0x0D,0x01,0x09,0x10,0x02,0x0B,/* [1478] OBJ_id_smime_aa_encrypKeyPref */
-0x2A,0x86,0x48,0x86,0xF7,0x0D,0x01,0x09,0x10,0x02,0x0C,/* [1489] OBJ_id_smime_aa_signingCertificate */
-0x2A,0x86,0x48,0x86,0xF7,0x0D,0x01,0x09,0x10,0x02,0x0D,/* [1500] OBJ_id_smime_aa_smimeEncryptCerts */
-0x2A,0x86,0x48,0x86,0xF7,0x0D,0x01,0x09,0x10,0x02,0x0E,/* [1511] OBJ_id_smime_aa_timeStampToken */
-0x2A,0x86,0x48,0x86,0xF7,0x0D,0x01,0x09,0x10,0x02,0x0F,/* [1522] OBJ_id_smime_aa_ets_sigPolicyId */
-0x2A,0x86,0x48,0x86,0xF7,0x0D,0x01,0x09,0x10,0x02,0x10,/* [1533] OBJ_id_smime_aa_ets_commitmentType */
-0x2A,0x86,0x48,0x86,0xF7,0x0D,0x01,0x09,0x10,0x02,0x11,/* [1544] OBJ_id_smime_aa_ets_signerLocation */
-0x2A,0x86,0x48,0x86,0xF7,0x0D,0x01,0x09,0x10,0x02,0x12,/* [1555] OBJ_id_smime_aa_ets_signerAttr */
-0x2A,0x86,0x48,0x86,0xF7,0x0D,0x01,0x09,0x10,0x02,0x13,/* [1566] OBJ_id_smime_aa_ets_otherSigCert */
-0x2A,0x86,0x48,0x86,0xF7,0x0D,0x01,0x09,0x10,0x02,0x14,/* [1577] OBJ_id_smime_aa_ets_contentTimestamp */
-0x2A,0x86,0x48,0x86,0xF7,0x0D,0x01,0x09,0x10,0x02,0x15,/* [1588] OBJ_id_smime_aa_ets_CertificateRefs */
-0x2A,0x86,0x48,0x86,0xF7,0x0D,0x01,0x09,0x10,0x02,0x16,/* [1599] OBJ_id_smime_aa_ets_RevocationRefs */
-0x2A,0x86,0x48,0x86,0xF7,0x0D,0x01,0x09,0x10,0x02,0x17,/* [1610] OBJ_id_smime_aa_ets_certValues */
-0x2A,0x86,0x48,0x86,0xF7,0x0D,0x01,0x09,0x10,0x02,0x18,/* [1621] OBJ_id_smime_aa_ets_revocationValues */
-0x2A,0x86,0x48,0x86,0xF7,0x0D,0x01,0x09,0x10,0x02,0x19,/* [1632] OBJ_id_smime_aa_ets_escTimeStamp */
-0x2A,0x86,0x48,0x86,0xF7,0x0D,0x01,0x09,0x10,0x02,0x1A,/* [1643] OBJ_id_smime_aa_ets_certCRLTimestamp */
-0x2A,0x86,0x48,0x86,0xF7,0x0D,0x01,0x09,0x10,0x02,0x1B,/* [1654] OBJ_id_smime_aa_ets_archiveTimeStamp */
-0x2A,0x86,0x48,0x86,0xF7,0x0D,0x01,0x09,0x10,0x02,0x1C,/* [1665] OBJ_id_smime_aa_signatureType */
-0x2A,0x86,0x48,0x86,0xF7,0x0D,0x01,0x09,0x10,0x02,0x1D,/* [1676] OBJ_id_smime_aa_dvcs_dvc */
-0x2A,0x86,0x48,0x86,0xF7,0x0D,0x01,0x09,0x10,0x03,0x01,/* [1687] OBJ_id_smime_alg_ESDHwith3DES */
-0x2A,0x86,0x48,0x86,0xF7,0x0D,0x01,0x09,0x10,0x03,0x02,/* [1698] OBJ_id_smime_alg_ESDHwithRC2 */
-0x2A,0x86,0x48,0x86,0xF7,0x0D,0x01,0x09,0x10,0x03,0x03,/* [1709] OBJ_id_smime_alg_3DESwrap */
-0x2A,0x86,0x48,0x86,0xF7,0x0D,0x01,0x09,0x10,0x03,0x04,/* [1720] OBJ_id_smime_alg_RC2wrap */
-0x2A,0x86,0x48,0x86,0xF7,0x0D,0x01,0x09,0x10,0x03,0x05,/* [1731] OBJ_id_smime_alg_ESDH */
-0x2A,0x86,0x48,0x86,0xF7,0x0D,0x01,0x09,0x10,0x03,0x06,/* [1742] OBJ_id_smime_alg_CMS3DESwrap */
-0x2A,0x86,0x48,0x86,0xF7,0x0D,0x01,0x09,0x10,0x03,0x07,/* [1753] OBJ_id_smime_alg_CMSRC2wrap */
-0x2A,0x86,0x48,0x86,0xF7,0x0D,0x01,0x09,0x10,0x04,0x01,/* [1764] OBJ_id_smime_cd_ldap */
-0x2A,0x86,0x48,0x86,0xF7,0x0D,0x01,0x09,0x10,0x05,0x01,/* [1775] OBJ_id_smime_spq_ets_sqt_uri */
-0x2A,0x86,0x48,0x86,0xF7,0x0D,0x01,0x09,0x10,0x05,0x02,/* [1786] OBJ_id_smime_spq_ets_sqt_unotice */
-0x2A,0x86,0x48,0x86,0xF7,0x0D,0x01,0x09,0x10,0x06,0x01,/* [1797] OBJ_id_smime_cti_ets_proofOfOrigin */
-0x2A,0x86,0x48,0x86,0xF7,0x0D,0x01,0x09,0x10,0x06,0x02,/* [1808] OBJ_id_smime_cti_ets_proofOfReceipt */
-0x2A,0x86,0x48,0x86,0xF7,0x0D,0x01,0x09,0x10,0x06,0x03,/* [1819] OBJ_id_smime_cti_ets_proofOfDelivery */
-0x2A,0x86,0x48,0x86,0xF7,0x0D,0x01,0x09,0x10,0x06,0x04,/* [1830] OBJ_id_smime_cti_ets_proofOfSender */
-0x2A,0x86,0x48,0x86,0xF7,0x0D,0x01,0x09,0x10,0x06,0x05,/* [1841] OBJ_id_smime_cti_ets_proofOfApproval */
-0x2A,0x86,0x48,0x86,0xF7,0x0D,0x01,0x09,0x10,0x06,0x06,/* [1852] OBJ_id_smime_cti_ets_proofOfCreation */
-0x2A,0x86,0x48,0x86,0xF7,0x0D,0x02,0x04,     /* [1863] OBJ_md4 */
-0x2B,0x06,0x01,0x05,0x05,0x07,0x00,          /* [1871] OBJ_id_pkix_mod */
-0x2B,0x06,0x01,0x05,0x05,0x07,0x02,          /* [1878] OBJ_id_qt */
-0x2B,0x06,0x01,0x05,0x05,0x07,0x04,          /* [1885] OBJ_id_it */
-0x2B,0x06,0x01,0x05,0x05,0x07,0x05,          /* [1892] OBJ_id_pkip */
-0x2B,0x06,0x01,0x05,0x05,0x07,0x06,          /* [1899] OBJ_id_alg */
-0x2B,0x06,0x01,0x05,0x05,0x07,0x07,          /* [1906] OBJ_id_cmc */
-0x2B,0x06,0x01,0x05,0x05,0x07,0x08,          /* [1913] OBJ_id_on */
-0x2B,0x06,0x01,0x05,0x05,0x07,0x09,          /* [1920] OBJ_id_pda */
-0x2B,0x06,0x01,0x05,0x05,0x07,0x0A,          /* [1927] OBJ_id_aca */
-0x2B,0x06,0x01,0x05,0x05,0x07,0x0B,          /* [1934] OBJ_id_qcs */
-0x2B,0x06,0x01,0x05,0x05,0x07,0x0C,          /* [1941] OBJ_id_cct */
-0x2B,0x06,0x01,0x05,0x05,0x07,0x00,0x01,     /* [1948] OBJ_id_pkix1_explicit_88 */
-0x2B,0x06,0x01,0x05,0x05,0x07,0x00,0x02,     /* [1956] OBJ_id_pkix1_implicit_88 */
-0x2B,0x06,0x01,0x05,0x05,0x07,0x00,0x03,     /* [1964] OBJ_id_pkix1_explicit_93 */
-0x2B,0x06,0x01,0x05,0x05,0x07,0x00,0x04,     /* [1972] OBJ_id_pkix1_implicit_93 */
-0x2B,0x06,0x01,0x05,0x05,0x07,0x00,0x05,     /* [1980] OBJ_id_mod_crmf */
-0x2B,0x06,0x01,0x05,0x05,0x07,0x00,0x06,     /* [1988] OBJ_id_mod_cmc */
-0x2B,0x06,0x01,0x05,0x05,0x07,0x00,0x07,     /* [1996] OBJ_id_mod_kea_profile_88 */
-0x2B,0x06,0x01,0x05,0x05,0x07,0x00,0x08,     /* [2004] OBJ_id_mod_kea_profile_93 */
-0x2B,0x06,0x01,0x05,0x05,0x07,0x00,0x09,     /* [2012] OBJ_id_mod_cmp */
-0x2B,0x06,0x01,0x05,0x05,0x07,0x00,0x0A,     /* [2020] OBJ_id_mod_qualified_cert_88 */
-0x2B,0x06,0x01,0x05,0x05,0x07,0x00,0x0B,     /* [2028] OBJ_id_mod_qualified_cert_93 */
-0x2B,0x06,0x01,0x05,0x05,0x07,0x00,0x0C,     /* [2036] OBJ_id_mod_attribute_cert */
-0x2B,0x06,0x01,0x05,0x05,0x07,0x00,0x0D,     /* [2044] OBJ_id_mod_timestamp_protocol */
-0x2B,0x06,0x01,0x05,0x05,0x07,0x00,0x0E,     /* [2052] OBJ_id_mod_ocsp */
-0x2B,0x06,0x01,0x05,0x05,0x07,0x00,0x0F,     /* [2060] OBJ_id_mod_dvcs */
-0x2B,0x06,0x01,0x05,0x05,0x07,0x00,0x10,     /* [2068] OBJ_id_mod_cmp2000 */
-0x2B,0x06,0x01,0x05,0x05,0x07,0x01,0x02,     /* [2076] OBJ_biometricInfo */
-0x2B,0x06,0x01,0x05,0x05,0x07,0x01,0x03,     /* [2084] OBJ_qcStatements */
-0x2B,0x06,0x01,0x05,0x05,0x07,0x01,0x04,     /* [2092] OBJ_ac_auditEntity */
-0x2B,0x06,0x01,0x05,0x05,0x07,0x01,0x05,     /* [2100] OBJ_ac_targeting */
-0x2B,0x06,0x01,0x05,0x05,0x07,0x01,0x06,     /* [2108] OBJ_aaControls */
-0x2B,0x06,0x01,0x05,0x05,0x07,0x01,0x07,     /* [2116] OBJ_sbgp_ipAddrBlock */
-0x2B,0x06,0x01,0x05,0x05,0x07,0x01,0x08,     /* [2124] OBJ_sbgp_autonomousSysNum */
-0x2B,0x06,0x01,0x05,0x05,0x07,0x01,0x09,     /* [2132] OBJ_sbgp_routerIdentifier */
-0x2B,0x06,0x01,0x05,0x05,0x07,0x02,0x03,     /* [2140] OBJ_textNotice */
-0x2B,0x06,0x01,0x05,0x05,0x07,0x03,0x05,     /* [2148] OBJ_ipsecEndSystem */
-0x2B,0x06,0x01,0x05,0x05,0x07,0x03,0x06,     /* [2156] OBJ_ipsecTunnel */
-0x2B,0x06,0x01,0x05,0x05,0x07,0x03,0x07,     /* [2164] OBJ_ipsecUser */
-0x2B,0x06,0x01,0x05,0x05,0x07,0x03,0x0A,     /* [2172] OBJ_dvcs */
-0x2B,0x06,0x01,0x05,0x05,0x07,0x04,0x01,     /* [2180] OBJ_id_it_caProtEncCert */
-0x2B,0x06,0x01,0x05,0x05,0x07,0x04,0x02,     /* [2188] OBJ_id_it_signKeyPairTypes */
-0x2B,0x06,0x01,0x05,0x05,0x07,0x04,0x03,     /* [2196] OBJ_id_it_encKeyPairTypes */
-0x2B,0x06,0x01,0x05,0x05,0x07,0x04,0x04,     /* [2204] OBJ_id_it_preferredSymmAlg */
-0x2B,0x06,0x01,0x05,0x05,0x07,0x04,0x05,     /* [2212] OBJ_id_it_caKeyUpdateInfo */
-0x2B,0x06,0x01,0x05,0x05,0x07,0x04,0x06,     /* [2220] OBJ_id_it_currentCRL */
-0x2B,0x06,0x01,0x05,0x05,0x07,0x04,0x07,     /* [2228] OBJ_id_it_unsupportedOIDs */
-0x2B,0x06,0x01,0x05,0x05,0x07,0x04,0x08,     /* [2236] OBJ_id_it_subscriptionRequest */
-0x2B,0x06,0x01,0x05,0x05,0x07,0x04,0x09,     /* [2244] OBJ_id_it_subscriptionResponse */
-0x2B,0x06,0x01,0x05,0x05,0x07,0x04,0x0A,     /* [2252] OBJ_id_it_keyPairParamReq */
-0x2B,0x06,0x01,0x05,0x05,0x07,0x04,0x0B,     /* [2260] OBJ_id_it_keyPairParamRep */
-0x2B,0x06,0x01,0x05,0x05,0x07,0x04,0x0C,     /* [2268] OBJ_id_it_revPassphrase */
-0x2B,0x06,0x01,0x05,0x05,0x07,0x04,0x0D,     /* [2276] OBJ_id_it_implicitConfirm */
-0x2B,0x06,0x01,0x05,0x05,0x07,0x04,0x0E,     /* [2284] OBJ_id_it_confirmWaitTime */
-0x2B,0x06,0x01,0x05,0x05,0x07,0x04,0x0F,     /* [2292] OBJ_id_it_origPKIMessage */
-0x2B,0x06,0x01,0x05,0x05,0x07,0x05,0x01,     /* [2300] OBJ_id_regCtrl */
-0x2B,0x06,0x01,0x05,0x05,0x07,0x05,0x02,     /* [2308] OBJ_id_regInfo */
-0x2B,0x06,0x01,0x05,0x05,0x07,0x05,0x01,0x01,/* [2316] OBJ_id_regCtrl_regToken */
-0x2B,0x06,0x01,0x05,0x05,0x07,0x05,0x01,0x02,/* [2325] OBJ_id_regCtrl_authenticator */
-0x2B,0x06,0x01,0x05,0x05,0x07,0x05,0x01,0x03,/* [2334] OBJ_id_regCtrl_pkiPublicationInfo */
-0x2B,0x06,0x01,0x05,0x05,0x07,0x05,0x01,0x04,/* [2343] OBJ_id_regCtrl_pkiArchiveOptions */
-0x2B,0x06,0x01,0x05,0x05,0x07,0x05,0x01,0x05,/* [2352] OBJ_id_regCtrl_oldCertID */
-0x2B,0x06,0x01,0x05,0x05,0x07,0x05,0x01,0x06,/* [2361] OBJ_id_regCtrl_protocolEncrKey */
-0x2B,0x06,0x01,0x05,0x05,0x07,0x05,0x02,0x01,/* [2370] OBJ_id_regInfo_utf8Pairs */
-0x2B,0x06,0x01,0x05,0x05,0x07,0x05,0x02,0x02,/* [2379] OBJ_id_regInfo_certReq */
-0x2B,0x06,0x01,0x05,0x05,0x07,0x06,0x01,     /* [2388] OBJ_id_alg_des40 */
-0x2B,0x06,0x01,0x05,0x05,0x07,0x06,0x02,     /* [2396] OBJ_id_alg_noSignature */
-0x2B,0x06,0x01,0x05,0x05,0x07,0x06,0x03,     /* [2404] OBJ_id_alg_dh_sig_hmac_sha1 */
-0x2B,0x06,0x01,0x05,0x05,0x07,0x06,0x04,     /* [2412] OBJ_id_alg_dh_pop */
-0x2B,0x06,0x01,0x05,0x05,0x07,0x07,0x01,     /* [2420] OBJ_id_cmc_statusInfo */
-0x2B,0x06,0x01,0x05,0x05,0x07,0x07,0x02,     /* [2428] OBJ_id_cmc_identification */
-0x2B,0x06,0x01,0x05,0x05,0x07,0x07,0x03,     /* [2436] OBJ_id_cmc_identityProof */
-0x2B,0x06,0x01,0x05,0x05,0x07,0x07,0x04,     /* [2444] OBJ_id_cmc_dataReturn */
-0x2B,0x06,0x01,0x05,0x05,0x07,0x07,0x05,     /* [2452] OBJ_id_cmc_transactionId */
-0x2B,0x06,0x01,0x05,0x05,0x07,0x07,0x06,     /* [2460] OBJ_id_cmc_senderNonce */
-0x2B,0x06,0x01,0x05,0x05,0x07,0x07,0x07,     /* [2468] OBJ_id_cmc_recipientNonce */
-0x2B,0x06,0x01,0x05,0x05,0x07,0x07,0x08,     /* [2476] OBJ_id_cmc_addExtensions */
-0x2B,0x06,0x01,0x05,0x05,0x07,0x07,0x09,     /* [2484] OBJ_id_cmc_encryptedPOP */
-0x2B,0x06,0x01,0x05,0x05,0x07,0x07,0x0A,     /* [2492] OBJ_id_cmc_decryptedPOP */
-0x2B,0x06,0x01,0x05,0x05,0x07,0x07,0x0B,     /* [2500] OBJ_id_cmc_lraPOPWitness */
-0x2B,0x06,0x01,0x05,0x05,0x07,0x07,0x0F,     /* [2508] OBJ_id_cmc_getCert */
-0x2B,0x06,0x01,0x05,0x05,0x07,0x07,0x10,     /* [2516] OBJ_id_cmc_getCRL */
-0x2B,0x06,0x01,0x05,0x05,0x07,0x07,0x11,     /* [2524] OBJ_id_cmc_revokeRequest */
-0x2B,0x06,0x01,0x05,0x05,0x07,0x07,0x12,     /* [2532] OBJ_id_cmc_regInfo */
-0x2B,0x06,0x01,0x05,0x05,0x07,0x07,0x13,     /* [2540] OBJ_id_cmc_responseInfo */
-0x2B,0x06,0x01,0x05,0x05,0x07,0x07,0x15,     /* [2548] OBJ_id_cmc_queryPending */
-0x2B,0x06,0x01,0x05,0x05,0x07,0x07,0x16,     /* [2556] OBJ_id_cmc_popLinkRandom */
-0x2B,0x06,0x01,0x05,0x05,0x07,0x07,0x17,     /* [2564] OBJ_id_cmc_popLinkWitness */
-0x2B,0x06,0x01,0x05,0x05,0x07,0x07,0x18,     /* [2572] OBJ_id_cmc_confirmCertAcceptance */
-0x2B,0x06,0x01,0x05,0x05,0x07,0x08,0x01,     /* [2580] OBJ_id_on_personalData */
-0x2B,0x06,0x01,0x05,0x05,0x07,0x09,0x01,     /* [2588] OBJ_id_pda_dateOfBirth */
-0x2B,0x06,0x01,0x05,0x05,0x07,0x09,0x02,     /* [2596] OBJ_id_pda_placeOfBirth */
-0x2B,0x06,0x01,0x05,0x05,0x07,0x09,0x03,     /* [2604] OBJ_id_pda_gender */
-0x2B,0x06,0x01,0x05,0x05,0x07,0x09,0x04,     /* [2612] OBJ_id_pda_countryOfCitizenship */
-0x2B,0x06,0x01,0x05,0x05,0x07,0x09,0x05,     /* [2620] OBJ_id_pda_countryOfResidence */
-0x2B,0x06,0x01,0x05,0x05,0x07,0x0A,0x01,     /* [2628] OBJ_id_aca_authenticationInfo */
-0x2B,0x06,0x01,0x05,0x05,0x07,0x0A,0x02,     /* [2636] OBJ_id_aca_accessIdentity */
-0x2B,0x06,0x01,0x05,0x05,0x07,0x0A,0x03,     /* [2644] OBJ_id_aca_chargingIdentity */
-0x2B,0x06,0x01,0x05,0x05,0x07,0x0A,0x04,     /* [2652] OBJ_id_aca_group */
-0x2B,0x06,0x01,0x05,0x05,0x07,0x0A,0x05,     /* [2660] OBJ_id_aca_role */
-0x2B,0x06,0x01,0x05,0x05,0x07,0x0B,0x01,     /* [2668] OBJ_id_qcs_pkixQCSyntax_v1 */
-0x2B,0x06,0x01,0x05,0x05,0x07,0x0C,0x01,     /* [2676] OBJ_id_cct_crs */
-0x2B,0x06,0x01,0x05,0x05,0x07,0x0C,0x02,     /* [2684] OBJ_id_cct_PKIData */
-0x2B,0x06,0x01,0x05,0x05,0x07,0x0C,0x03,     /* [2692] OBJ_id_cct_PKIResponse */
-0x2B,0x06,0x01,0x05,0x05,0x07,0x30,0x03,     /* [2700] OBJ_ad_timeStamping */
-0x2B,0x06,0x01,0x05,0x05,0x07,0x30,0x04,     /* [2708] OBJ_ad_dvcs */
-0x2B,0x06,0x01,0x05,0x05,0x07,0x30,0x01,0x01,/* [2716] OBJ_id_pkix_OCSP_basic */
-0x2B,0x06,0x01,0x05,0x05,0x07,0x30,0x01,0x02,/* [2725] OBJ_id_pkix_OCSP_Nonce */
-0x2B,0x06,0x01,0x05,0x05,0x07,0x30,0x01,0x03,/* [2734] OBJ_id_pkix_OCSP_CrlID */
-0x2B,0x06,0x01,0x05,0x05,0x07,0x30,0x01,0x04,/* [2743] OBJ_id_pkix_OCSP_acceptableResponses */
-0x2B,0x06,0x01,0x05,0x05,0x07,0x30,0x01,0x05,/* [2752] OBJ_id_pkix_OCSP_noCheck */
-0x2B,0x06,0x01,0x05,0x05,0x07,0x30,0x01,0x06,/* [2761] OBJ_id_pkix_OCSP_archiveCutoff */
-0x2B,0x06,0x01,0x05,0x05,0x07,0x30,0x01,0x07,/* [2770] OBJ_id_pkix_OCSP_serviceLocator */
-0x2B,0x06,0x01,0x05,0x05,0x07,0x30,0x01,0x08,/* [2779] OBJ_id_pkix_OCSP_extendedStatus */
-0x2B,0x06,0x01,0x05,0x05,0x07,0x30,0x01,0x09,/* [2788] OBJ_id_pkix_OCSP_valid */
-0x2B,0x06,0x01,0x05,0x05,0x07,0x30,0x01,0x0A,/* [2797] OBJ_id_pkix_OCSP_path */
-0x2B,0x06,0x01,0x05,0x05,0x07,0x30,0x01,0x0B,/* [2806] OBJ_id_pkix_OCSP_trustRoot */
-0x2B,0x0E,0x03,0x02,                         /* [2815] OBJ_algorithm */
-0x2B,0x0E,0x03,0x02,0x0B,                    /* [2819] OBJ_rsaSignature */
-0x55,0x08,                                   /* [2824] OBJ_X500algorithms */
-0x2B,                                        /* [2826] OBJ_org */
-0x2B,0x06,                                   /* [2827] OBJ_dod */
-0x2B,0x06,0x01,                              /* [2829] OBJ_iana */
-0x2B,0x06,0x01,0x01,                         /* [2832] OBJ_Directory */
-0x2B,0x06,0x01,0x02,                         /* [2836] OBJ_Management */
-0x2B,0x06,0x01,0x03,                         /* [2840] OBJ_Experimental */
-0x2B,0x06,0x01,0x04,                         /* [2844] OBJ_Private */
-0x2B,0x06,0x01,0x05,                         /* [2848] OBJ_Security */
-0x2B,0x06,0x01,0x06,                         /* [2852] OBJ_SNMPv2 */
-0x2B,0x06,0x01,0x07,                         /* [2856] OBJ_Mail */
-0x2B,0x06,0x01,0x04,0x01,                    /* [2860] OBJ_Enterprises */
-0x2B,0x06,0x01,0x04,0x01,0x8B,0x3A,0x82,0x58,/* [2865] OBJ_dcObject */
-0x09,0x92,0x26,0x89,0x93,0xF2,0x2C,0x64,0x01,0x19,/* [2874] OBJ_domainComponent */
-0x09,0x92,0x26,0x89,0x93,0xF2,0x2C,0x64,0x04,0x0D,/* [2884] OBJ_Domain */
-0x00,                                        /* [2894] OBJ_joint_iso_ccitt */
-0x55,0x01,0x05,                              /* [2895] OBJ_selected_attribute_types */
-0x55,0x01,0x05,0x37,                         /* [2898] OBJ_clearance */
-0x2A,0x86,0x48,0x86,0xF7,0x0D,0x01,0x01,0x03,/* [2902] OBJ_md4WithRSAEncryption */
-0x2B,0x06,0x01,0x05,0x05,0x07,0x01,0x0A,     /* [2911] OBJ_ac_proxying */
-0x2B,0x06,0x01,0x05,0x05,0x07,0x01,0x0B,     /* [2919] OBJ_sinfo_access */
-0x2B,0x06,0x01,0x05,0x05,0x07,0x0A,0x06,     /* [2927] OBJ_id_aca_encAttrs */
-0x55,0x04,0x48,                              /* [2935] OBJ_role */
-0x55,0x1D,0x24,                              /* [2938] OBJ_policy_constraints */
-0x55,0x1D,0x37,                              /* [2941] OBJ_target_information */
-0x55,0x1D,0x38,                              /* [2944] OBJ_no_rev_avail */
-0x00,                                        /* [2947] OBJ_ccitt */
-0x2A,0x86,0x48,0xCE,0x3D,                    /* [2948] OBJ_ansi_X9_62 */
-0x2A,0x86,0x48,0xCE,0x3D,0x01,0x01,          /* [2953] OBJ_X9_62_prime_field */
-0x2A,0x86,0x48,0xCE,0x3D,0x01,0x02,          /* [2960] OBJ_X9_62_characteristic_two_field */
-0x2A,0x86,0x48,0xCE,0x3D,0x02,0x01,          /* [2967] OBJ_X9_62_id_ecPublicKey */
-0x2A,0x86,0x48,0xCE,0x3D,0x03,0x01,0x01,     /* [2974] OBJ_X9_62_prime192v1 */
-0x2A,0x86,0x48,0xCE,0x3D,0x03,0x01,0x02,     /* [2982] OBJ_X9_62_prime192v2 */
-0x2A,0x86,0x48,0xCE,0x3D,0x03,0x01,0x03,     /* [2990] OBJ_X9_62_prime192v3 */
-0x2A,0x86,0x48,0xCE,0x3D,0x03,0x01,0x04,     /* [2998] OBJ_X9_62_prime239v1 */
-0x2A,0x86,0x48,0xCE,0x3D,0x03,0x01,0x05,     /* [3006] OBJ_X9_62_prime239v2 */
-0x2A,0x86,0x48,0xCE,0x3D,0x03,0x01,0x06,     /* [3014] OBJ_X9_62_prime239v3 */
-0x2A,0x86,0x48,0xCE,0x3D,0x03,0x01,0x07,     /* [3022] OBJ_X9_62_prime256v1 */
-0x2A,0x86,0x48,0xCE,0x3D,0x04,0x01,          /* [3030] OBJ_ecdsa_with_SHA1 */
-0x2B,0x06,0x01,0x04,0x01,0x82,0x37,0x11,0x01,/* [3037] OBJ_ms_csp_name */
-0x60,0x86,0x48,0x01,0x65,0x03,0x04,0x01,0x01,/* [3046] OBJ_aes_128_ecb */
-0x60,0x86,0x48,0x01,0x65,0x03,0x04,0x01,0x02,/* [3055] OBJ_aes_128_cbc */
-0x60,0x86,0x48,0x01,0x65,0x03,0x04,0x01,0x03,/* [3064] OBJ_aes_128_ofb128 */
-0x60,0x86,0x48,0x01,0x65,0x03,0x04,0x01,0x04,/* [3073] OBJ_aes_128_cfb128 */
-0x60,0x86,0x48,0x01,0x65,0x03,0x04,0x01,0x15,/* [3082] OBJ_aes_192_ecb */
-0x60,0x86,0x48,0x01,0x65,0x03,0x04,0x01,0x16,/* [3091] OBJ_aes_192_cbc */
-0x60,0x86,0x48,0x01,0x65,0x03,0x04,0x01,0x17,/* [3100] OBJ_aes_192_ofb128 */
-0x60,0x86,0x48,0x01,0x65,0x03,0x04,0x01,0x18,/* [3109] OBJ_aes_192_cfb128 */
-0x60,0x86,0x48,0x01,0x65,0x03,0x04,0x01,0x29,/* [3118] OBJ_aes_256_ecb */
-0x60,0x86,0x48,0x01,0x65,0x03,0x04,0x01,0x2A,/* [3127] OBJ_aes_256_cbc */
-0x60,0x86,0x48,0x01,0x65,0x03,0x04,0x01,0x2B,/* [3136] OBJ_aes_256_ofb128 */
-0x60,0x86,0x48,0x01,0x65,0x03,0x04,0x01,0x2C,/* [3145] OBJ_aes_256_cfb128 */
-0x55,0x1D,0x17,                              /* [3154] OBJ_hold_instruction_code */
-0x2A,0x86,0x48,0xCE,0x38,0x02,0x01,          /* [3157] OBJ_hold_instruction_none */
-0x2A,0x86,0x48,0xCE,0x38,0x02,0x02,          /* [3164] OBJ_hold_instruction_call_issuer */
-0x2A,0x86,0x48,0xCE,0x38,0x02,0x03,          /* [3171] OBJ_hold_instruction_reject */
-0x09,                                        /* [3178] OBJ_data */
-0x09,0x92,0x26,                              /* [3179] OBJ_pss */
-0x09,0x92,0x26,0x89,0x93,0xF2,0x2C,          /* [3182] OBJ_ucl */
-0x09,0x92,0x26,0x89,0x93,0xF2,0x2C,0x64,     /* [3189] OBJ_pilot */
-0x09,0x92,0x26,0x89,0x93,0xF2,0x2C,0x64,0x01,/* [3197] OBJ_pilotAttributeType */
-0x09,0x92,0x26,0x89,0x93,0xF2,0x2C,0x64,0x03,/* [3206] OBJ_pilotAttributeSyntax */
-0x09,0x92,0x26,0x89,0x93,0xF2,0x2C,0x64,0x04,/* [3215] OBJ_pilotObjectClass */
-0x09,0x92,0x26,0x89,0x93,0xF2,0x2C,0x64,0x0A,/* [3224] OBJ_pilotGroups */
-0x09,0x92,0x26,0x89,0x93,0xF2,0x2C,0x64,0x03,0x04,/* [3233] OBJ_iA5StringSyntax */
-0x09,0x92,0x26,0x89,0x93,0xF2,0x2C,0x64,0x03,0x05,/* [3243] OBJ_caseIgnoreIA5StringSyntax */
-0x09,0x92,0x26,0x89,0x93,0xF2,0x2C,0x64,0x04,0x03,/* [3253] OBJ_pilotObject */
-0x09,0x92,0x26,0x89,0x93,0xF2,0x2C,0x64,0x04,0x04,/* [3263] OBJ_pilotPerson */
-0x09,0x92,0x26,0x89,0x93,0xF2,0x2C,0x64,0x04,0x05,/* [3273] OBJ_account */
-0x09,0x92,0x26,0x89,0x93,0xF2,0x2C,0x64,0x04,0x06,/* [3283] OBJ_document */
-0x09,0x92,0x26,0x89,0x93,0xF2,0x2C,0x64,0x04,0x07,/* [3293] OBJ_room */
-0x09,0x92,0x26,0x89,0x93,0xF2,0x2C,0x64,0x04,0x09,/* [3303] OBJ_documentSeries */
-0x09,0x92,0x26,0x89,0x93,0xF2,0x2C,0x64,0x04,0x0E,/* [3313] OBJ_rFC822localPart */
-0x09,0x92,0x26,0x89,0x93,0xF2,0x2C,0x64,0x04,0x0F,/* [3323] OBJ_dNSDomain */
-0x09,0x92,0x26,0x89,0x93,0xF2,0x2C,0x64,0x04,0x11,/* [3333] OBJ_domainRelatedObject */
-0x09,0x92,0x26,0x89,0x93,0xF2,0x2C,0x64,0x04,0x12,/* [3343] OBJ_friendlyCountry */
-0x09,0x92,0x26,0x89,0x93,0xF2,0x2C,0x64,0x04,0x13,/* [3353] OBJ_simpleSecurityObject */
-0x09,0x92,0x26,0x89,0x93,0xF2,0x2C,0x64,0x04,0x14,/* [3363] OBJ_pilotOrganization */
-0x09,0x92,0x26,0x89,0x93,0xF2,0x2C,0x64,0x04,0x15,/* [3373] OBJ_pilotDSA */
-0x09,0x92,0x26,0x89,0x93,0xF2,0x2C,0x64,0x04,0x16,/* [3383] OBJ_qualityLabelledData */
-0x09,0x92,0x26,0x89,0x93,0xF2,0x2C,0x64,0x01,0x01,/* [3393] OBJ_userId */
-0x09,0x92,0x26,0x89,0x93,0xF2,0x2C,0x64,0x01,0x02,/* [3403] OBJ_textEncodedORAddress */
-0x09,0x92,0x26,0x89,0x93,0xF2,0x2C,0x64,0x01,0x03,/* [3413] OBJ_rfc822Mailbox */
-0x09,0x92,0x26,0x89,0x93,0xF2,0x2C,0x64,0x01,0x04,/* [3423] OBJ_info */
-0x09,0x92,0x26,0x89,0x93,0xF2,0x2C,0x64,0x01,0x05,/* [3433] OBJ_favouriteDrink */
-0x09,0x92,0x26,0x89,0x93,0xF2,0x2C,0x64,0x01,0x06,/* [3443] OBJ_roomNumber */
-0x09,0x92,0x26,0x89,0x93,0xF2,0x2C,0x64,0x01,0x07,/* [3453] OBJ_photo */
-0x09,0x92,0x26,0x89,0x93,0xF2,0x2C,0x64,0x01,0x08,/* [3463] OBJ_userClass */
-0x09,0x92,0x26,0x89,0x93,0xF2,0x2C,0x64,0x01,0x09,/* [3473] OBJ_host */
-0x09,0x92,0x26,0x89,0x93,0xF2,0x2C,0x64,0x01,0x0A,/* [3483] OBJ_manager */
-0x09,0x92,0x26,0x89,0x93,0xF2,0x2C,0x64,0x01,0x0B,/* [3493] OBJ_documentIdentifier */
-0x09,0x92,0x26,0x89,0x93,0xF2,0x2C,0x64,0x01,0x0C,/* [3503] OBJ_documentTitle */
-0x09,0x92,0x26,0x89,0x93,0xF2,0x2C,0x64,0x01,0x0D,/* [3513] OBJ_documentVersion */
-0x09,0x92,0x26,0x89,0x93,0xF2,0x2C,0x64,0x01,0x0E,/* [3523] OBJ_documentAuthor */
-0x09,0x92,0x26,0x89,0x93,0xF2,0x2C,0x64,0x01,0x0F,/* [3533] OBJ_documentLocation */
-0x09,0x92,0x26,0x89,0x93,0xF2,0x2C,0x64,0x01,0x14,/* [3543] OBJ_homeTelephoneNumber */
-0x09,0x92,0x26,0x89,0x93,0xF2,0x2C,0x64,0x01,0x15,/* [3553] OBJ_secretary */
-0x09,0x92,0x26,0x89,0x93,0xF2,0x2C,0x64,0x01,0x16,/* [3563] OBJ_otherMailbox */
-0x09,0x92,0x26,0x89,0x93,0xF2,0x2C,0x64,0x01,0x17,/* [3573] OBJ_lastModifiedTime */
-0x09,0x92,0x26,0x89,0x93,0xF2,0x2C,0x64,0x01,0x18,/* [3583] OBJ_lastModifiedBy */
-0x09,0x92,0x26,0x89,0x93,0xF2,0x2C,0x64,0x01,0x1A,/* [3593] OBJ_aRecord */
-0x09,0x92,0x26,0x89,0x93,0xF2,0x2C,0x64,0x01,0x1B,/* [3603] OBJ_pilotAttributeType27 */
-0x09,0x92,0x26,0x89,0x93,0xF2,0x2C,0x64,0x01,0x1C,/* [3613] OBJ_mXRecord */
-0x09,0x92,0x26,0x89,0x93,0xF2,0x2C,0x64,0x01,0x1D,/* [3623] OBJ_nSRecord */
-0x09,0x92,0x26,0x89,0x93,0xF2,0x2C,0x64,0x01,0x1E,/* [3633] OBJ_sOARecord */
-0x09,0x92,0x26,0x89,0x93,0xF2,0x2C,0x64,0x01,0x1F,/* [3643] OBJ_cNAMERecord */
-0x09,0x92,0x26,0x89,0x93,0xF2,0x2C,0x64,0x01,0x25,/* [3653] OBJ_associatedDomain */
-0x09,0x92,0x26,0x89,0x93,0xF2,0x2C,0x64,0x01,0x26,/* [3663] OBJ_associatedName */
-0x09,0x92,0x26,0x89,0x93,0xF2,0x2C,0x64,0x01,0x27,/* [3673] OBJ_homePostalAddress */
-0x09,0x92,0x26,0x89,0x93,0xF2,0x2C,0x64,0x01,0x28,/* [3683] OBJ_personalTitle */
-0x09,0x92,0x26,0x89,0x93,0xF2,0x2C,0x64,0x01,0x29,/* [3693] OBJ_mobileTelephoneNumber */
-0x09,0x92,0x26,0x89,0x93,0xF2,0x2C,0x64,0x01,0x2A,/* [3703] OBJ_pagerTelephoneNumber */
-0x09,0x92,0x26,0x89,0x93,0xF2,0x2C,0x64,0x01,0x2B,/* [3713] OBJ_friendlyCountryName */
-0x09,0x92,0x26,0x89,0x93,0xF2,0x2C,0x64,0x01,0x2D,/* [3723] OBJ_organizationalStatus */
-0x09,0x92,0x26,0x89,0x93,0xF2,0x2C,0x64,0x01,0x2E,/* [3733] OBJ_janetMailbox */
-0x09,0x92,0x26,0x89,0x93,0xF2,0x2C,0x64,0x01,0x2F,/* [3743] OBJ_mailPreferenceOption */
-0x09,0x92,0x26,0x89,0x93,0xF2,0x2C,0x64,0x01,0x30,/* [3753] OBJ_buildingName */
-0x09,0x92,0x26,0x89,0x93,0xF2,0x2C,0x64,0x01,0x31,/* [3763] OBJ_dSAQuality */
-0x09,0x92,0x26,0x89,0x93,0xF2,0x2C,0x64,0x01,0x32,/* [3773] OBJ_singleLevelQuality */
-0x09,0x92,0x26,0x89,0x93,0xF2,0x2C,0x64,0x01,0x33,/* [3783] OBJ_subtreeMinimumQuality */
-0x09,0x92,0x26,0x89,0x93,0xF2,0x2C,0x64,0x01,0x34,/* [3793] OBJ_subtreeMaximumQuality */
-0x09,0x92,0x26,0x89,0x93,0xF2,0x2C,0x64,0x01,0x35,/* [3803] OBJ_personalSignature */
-0x09,0x92,0x26,0x89,0x93,0xF2,0x2C,0x64,0x01,0x36,/* [3813] OBJ_dITRedirect */
-0x09,0x92,0x26,0x89,0x93,0xF2,0x2C,0x64,0x01,0x37,/* [3823] OBJ_audio */
-0x09,0x92,0x26,0x89,0x93,0xF2,0x2C,0x64,0x01,0x38,/* [3833] OBJ_documentPublisher */
-0x55,0x04,0x2D,                              /* [3843] OBJ_x500UniqueIdentifier */
-0x2B,0x06,0x01,0x07,0x01,                    /* [3846] OBJ_mime_mhs */
-0x2B,0x06,0x01,0x07,0x01,0x01,               /* [3851] OBJ_mime_mhs_headings */
-0x2B,0x06,0x01,0x07,0x01,0x02,               /* [3857] OBJ_mime_mhs_bodies */
-0x2B,0x06,0x01,0x07,0x01,0x01,0x01,          /* [3863] OBJ_id_hex_partial_message */
-0x2B,0x06,0x01,0x07,0x01,0x01,0x02,          /* [3870] OBJ_id_hex_multipart_message */
-0x55,0x04,0x2C,                              /* [3877] OBJ_generationQualifier */
-0x55,0x04,0x41,                              /* [3880] OBJ_pseudonym */
-0x67,0x2A,                                   /* [3883] OBJ_id_set */
-0x67,0x2A,0x00,                              /* [3885] OBJ_set_ctype */
-0x67,0x2A,0x01,                              /* [3888] OBJ_set_msgExt */
-0x67,0x2A,0x03,                              /* [3891] OBJ_set_attr */
-0x67,0x2A,0x05,                              /* [3894] OBJ_set_policy */
-0x67,0x2A,0x07,                              /* [3897] OBJ_set_certExt */
-0x67,0x2A,0x08,                              /* [3900] OBJ_set_brand */
-0x67,0x2A,0x00,0x00,                         /* [3903] OBJ_setct_PANData */
-0x67,0x2A,0x00,0x01,                         /* [3907] OBJ_setct_PANToken */
-0x67,0x2A,0x00,0x02,                         /* [3911] OBJ_setct_PANOnly */
-0x67,0x2A,0x00,0x03,                         /* [3915] OBJ_setct_OIData */
-0x67,0x2A,0x00,0x04,                         /* [3919] OBJ_setct_PI */
-0x67,0x2A,0x00,0x05,                         /* [3923] OBJ_setct_PIData */
-0x67,0x2A,0x00,0x06,                         /* [3927] OBJ_setct_PIDataUnsigned */
-0x67,0x2A,0x00,0x07,                         /* [3931] OBJ_setct_HODInput */
-0x67,0x2A,0x00,0x08,                         /* [3935] OBJ_setct_AuthResBaggage */
-0x67,0x2A,0x00,0x09,                         /* [3939] OBJ_setct_AuthRevReqBaggage */
-0x67,0x2A,0x00,0x0A,                         /* [3943] OBJ_setct_AuthRevResBaggage */
-0x67,0x2A,0x00,0x0B,                         /* [3947] OBJ_setct_CapTokenSeq */
-0x67,0x2A,0x00,0x0C,                         /* [3951] OBJ_setct_PInitResData */
-0x67,0x2A,0x00,0x0D,                         /* [3955] OBJ_setct_PI_TBS */
-0x67,0x2A,0x00,0x0E,                         /* [3959] OBJ_setct_PResData */
-0x67,0x2A,0x00,0x10,                         /* [3963] OBJ_setct_AuthReqTBS */
-0x67,0x2A,0x00,0x11,                         /* [3967] OBJ_setct_AuthResTBS */
-0x67,0x2A,0x00,0x12,                         /* [3971] OBJ_setct_AuthResTBSX */
-0x67,0x2A,0x00,0x13,                         /* [3975] OBJ_setct_AuthTokenTBS */
-0x67,0x2A,0x00,0x14,                         /* [3979] OBJ_setct_CapTokenData */
-0x67,0x2A,0x00,0x15,                         /* [3983] OBJ_setct_CapTokenTBS */
-0x67,0x2A,0x00,0x16,                         /* [3987] OBJ_setct_AcqCardCodeMsg */
-0x67,0x2A,0x00,0x17,                         /* [3991] OBJ_setct_AuthRevReqTBS */
-0x67,0x2A,0x00,0x18,                         /* [3995] OBJ_setct_AuthRevResData */
-0x67,0x2A,0x00,0x19,                         /* [3999] OBJ_setct_AuthRevResTBS */
-0x67,0x2A,0x00,0x1A,                         /* [4003] OBJ_setct_CapReqTBS */
-0x67,0x2A,0x00,0x1B,                         /* [4007] OBJ_setct_CapReqTBSX */
-0x67,0x2A,0x00,0x1C,                         /* [4011] OBJ_setct_CapResData */
-0x67,0x2A,0x00,0x1D,                         /* [4015] OBJ_setct_CapRevReqTBS */
-0x67,0x2A,0x00,0x1E,                         /* [4019] OBJ_setct_CapRevReqTBSX */
-0x67,0x2A,0x00,0x1F,                         /* [4023] OBJ_setct_CapRevResData */
-0x67,0x2A,0x00,0x20,                         /* [4027] OBJ_setct_CredReqTBS */
-0x67,0x2A,0x00,0x21,                         /* [4031] OBJ_setct_CredReqTBSX */
-0x67,0x2A,0x00,0x22,                         /* [4035] OBJ_setct_CredResData */
-0x67,0x2A,0x00,0x23,                         /* [4039] OBJ_setct_CredRevReqTBS */
-0x67,0x2A,0x00,0x24,                         /* [4043] OBJ_setct_CredRevReqTBSX */
-0x67,0x2A,0x00,0x25,                         /* [4047] OBJ_setct_CredRevResData */
-0x67,0x2A,0x00,0x26,                         /* [4051] OBJ_setct_PCertReqData */
-0x67,0x2A,0x00,0x27,                         /* [4055] OBJ_setct_PCertResTBS */
-0x67,0x2A,0x00,0x28,                         /* [4059] OBJ_setct_BatchAdminReqData */
-0x67,0x2A,0x00,0x29,                         /* [4063] OBJ_setct_BatchAdminResData */
-0x67,0x2A,0x00,0x2A,                         /* [4067] OBJ_setct_CardCInitResTBS */
-0x67,0x2A,0x00,0x2B,                         /* [4071] OBJ_setct_MeAqCInitResTBS */
-0x67,0x2A,0x00,0x2C,                         /* [4075] OBJ_setct_RegFormResTBS */
-0x67,0x2A,0x00,0x2D,                         /* [4079] OBJ_setct_CertReqData */
-0x67,0x2A,0x00,0x2E,                         /* [4083] OBJ_setct_CertReqTBS */
-0x67,0x2A,0x00,0x2F,                         /* [4087] OBJ_setct_CertResData */
-0x67,0x2A,0x00,0x30,                         /* [4091] OBJ_setct_CertInqReqTBS */
-0x67,0x2A,0x00,0x31,                         /* [4095] OBJ_setct_ErrorTBS */
-0x67,0x2A,0x00,0x32,                         /* [4099] OBJ_setct_PIDualSignedTBE */
-0x67,0x2A,0x00,0x33,                         /* [4103] OBJ_setct_PIUnsignedTBE */
-0x67,0x2A,0x00,0x34,                         /* [4107] OBJ_setct_AuthReqTBE */
-0x67,0x2A,0x00,0x35,                         /* [4111] OBJ_setct_AuthResTBE */
-0x67,0x2A,0x00,0x36,                         /* [4115] OBJ_setct_AuthResTBEX */
-0x67,0x2A,0x00,0x37,                         /* [4119] OBJ_setct_AuthTokenTBE */
-0x67,0x2A,0x00,0x38,                         /* [4123] OBJ_setct_CapTokenTBE */
-0x67,0x2A,0x00,0x39,                         /* [4127] OBJ_setct_CapTokenTBEX */
-0x67,0x2A,0x00,0x3A,                         /* [4131] OBJ_setct_AcqCardCodeMsgTBE */
-0x67,0x2A,0x00,0x3B,                         /* [4135] OBJ_setct_AuthRevReqTBE */
-0x67,0x2A,0x00,0x3C,                         /* [4139] OBJ_setct_AuthRevResTBE */
-0x67,0x2A,0x00,0x3D,                         /* [4143] OBJ_setct_AuthRevResTBEB */
-0x67,0x2A,0x00,0x3E,                         /* [4147] OBJ_setct_CapReqTBE */
-0x67,0x2A,0x00,0x3F,                         /* [4151] OBJ_setct_CapReqTBEX */
-0x67,0x2A,0x00,0x40,                         /* [4155] OBJ_setct_CapResTBE */
-0x67,0x2A,0x00,0x41,                         /* [4159] OBJ_setct_CapRevReqTBE */
-0x67,0x2A,0x00,0x42,                         /* [4163] OBJ_setct_CapRevReqTBEX */
-0x67,0x2A,0x00,0x43,                         /* [4167] OBJ_setct_CapRevResTBE */
-0x67,0x2A,0x00,0x44,                         /* [4171] OBJ_setct_CredReqTBE */
-0x67,0x2A,0x00,0x45,                         /* [4175] OBJ_setct_CredReqTBEX */
-0x67,0x2A,0x00,0x46,                         /* [4179] OBJ_setct_CredResTBE */
-0x67,0x2A,0x00,0x47,                         /* [4183] OBJ_setct_CredRevReqTBE */
-0x67,0x2A,0x00,0x48,                         /* [4187] OBJ_setct_CredRevReqTBEX */
-0x67,0x2A,0x00,0x49,                         /* [4191] OBJ_setct_CredRevResTBE */
-0x67,0x2A,0x00,0x4A,                         /* [4195] OBJ_setct_BatchAdminReqTBE */
-0x67,0x2A,0x00,0x4B,                         /* [4199] OBJ_setct_BatchAdminResTBE */
-0x67,0x2A,0x00,0x4C,                         /* [4203] OBJ_setct_RegFormReqTBE */
-0x67,0x2A,0x00,0x4D,                         /* [4207] OBJ_setct_CertReqTBE */
-0x67,0x2A,0x00,0x4E,                         /* [4211] OBJ_setct_CertReqTBEX */
-0x67,0x2A,0x00,0x4F,                         /* [4215] OBJ_setct_CertResTBE */
-0x67,0x2A,0x00,0x50,                         /* [4219] OBJ_setct_CRLNotificationTBS */
-0x67,0x2A,0x00,0x51,                         /* [4223] OBJ_setct_CRLNotificationResTBS */
-0x67,0x2A,0x00,0x52,                         /* [4227] OBJ_setct_BCIDistributionTBS */
-0x67,0x2A,0x01,0x01,                         /* [4231] OBJ_setext_genCrypt */
-0x67,0x2A,0x01,0x03,                         /* [4235] OBJ_setext_miAuth */
-0x67,0x2A,0x01,0x04,                         /* [4239] OBJ_setext_pinSecure */
-0x67,0x2A,0x01,0x05,                         /* [4243] OBJ_setext_pinAny */
-0x67,0x2A,0x01,0x07,                         /* [4247] OBJ_setext_track2 */
-0x67,0x2A,0x01,0x08,                         /* [4251] OBJ_setext_cv */
-0x67,0x2A,0x05,0x00,                         /* [4255] OBJ_set_policy_root */
-0x67,0x2A,0x07,0x00,                         /* [4259] OBJ_setCext_hashedRoot */
-0x67,0x2A,0x07,0x01,                         /* [4263] OBJ_setCext_certType */
-0x67,0x2A,0x07,0x02,                         /* [4267] OBJ_setCext_merchData */
-0x67,0x2A,0x07,0x03,                         /* [4271] OBJ_setCext_cCertRequired */
-0x67,0x2A,0x07,0x04,                         /* [4275] OBJ_setCext_tunneling */
-0x67,0x2A,0x07,0x05,                         /* [4279] OBJ_setCext_setExt */
-0x67,0x2A,0x07,0x06,                         /* [4283] OBJ_setCext_setQualf */
-0x67,0x2A,0x07,0x07,                         /* [4287] OBJ_setCext_PGWYcapabilities */
-0x67,0x2A,0x07,0x08,                         /* [4291] OBJ_setCext_TokenIdentifier */
-0x67,0x2A,0x07,0x09,                         /* [4295] OBJ_setCext_Track2Data */
-0x67,0x2A,0x07,0x0A,                         /* [4299] OBJ_setCext_TokenType */
-0x67,0x2A,0x07,0x0B,                         /* [4303] OBJ_setCext_IssuerCapabilities */
-0x67,0x2A,0x03,0x00,                         /* [4307] OBJ_setAttr_Cert */
-0x67,0x2A,0x03,0x01,                         /* [4311] OBJ_setAttr_PGWYcap */
-0x67,0x2A,0x03,0x02,                         /* [4315] OBJ_setAttr_TokenType */
-0x67,0x2A,0x03,0x03,                         /* [4319] OBJ_setAttr_IssCap */
-0x67,0x2A,0x03,0x00,0x00,                    /* [4323] OBJ_set_rootKeyThumb */
-0x67,0x2A,0x03,0x00,0x01,                    /* [4328] OBJ_set_addPolicy */
-0x67,0x2A,0x03,0x02,0x01,                    /* [4333] OBJ_setAttr_Token_EMV */
-0x67,0x2A,0x03,0x02,0x02,                    /* [4338] OBJ_setAttr_Token_B0Prime */
-0x67,0x2A,0x03,0x03,0x03,                    /* [4343] OBJ_setAttr_IssCap_CVM */
-0x67,0x2A,0x03,0x03,0x04,                    /* [4348] OBJ_setAttr_IssCap_T2 */
-0x67,0x2A,0x03,0x03,0x05,                    /* [4353] OBJ_setAttr_IssCap_Sig */
-0x67,0x2A,0x03,0x03,0x03,0x01,               /* [4358] OBJ_setAttr_GenCryptgrm */
-0x67,0x2A,0x03,0x03,0x04,0x01,               /* [4364] OBJ_setAttr_T2Enc */
-0x67,0x2A,0x03,0x03,0x04,0x02,               /* [4370] OBJ_setAttr_T2cleartxt */
-0x67,0x2A,0x03,0x03,0x05,0x01,               /* [4376] OBJ_setAttr_TokICCsig */
-0x67,0x2A,0x03,0x03,0x05,0x02,               /* [4382] OBJ_setAttr_SecDevSig */
-0x67,0x2A,0x08,0x01,                         /* [4388] OBJ_set_brand_IATA_ATA */
-0x67,0x2A,0x08,0x1E,                         /* [4392] OBJ_set_brand_Diners */
-0x67,0x2A,0x08,0x22,                         /* [4396] OBJ_set_brand_AmericanExpress */
-0x67,0x2A,0x08,0x23,                         /* [4400] OBJ_set_brand_JCB */
-0x67,0x2A,0x08,0x04,                         /* [4404] OBJ_set_brand_Visa */
-0x67,0x2A,0x08,0x05,                         /* [4408] OBJ_set_brand_MasterCard */
-0x67,0x2A,0x08,0xAE,0x7B,                    /* [4412] OBJ_set_brand_Novus */
-0x2A,0x86,0x48,0x86,0xF7,0x0D,0x03,0x0A,     /* [4417] OBJ_des_cdmf */
-0x2A,0x86,0x48,0x86,0xF7,0x0D,0x01,0x01,0x06,/* [4425] OBJ_rsaOAEPEncryptionSET */
-0x00,                                        /* [4434] OBJ_itu_t */
-0x50,                                        /* [4435] OBJ_joint_iso_itu_t */
-0x67,                                        /* [4436] OBJ_international_organizations */
-0x2B,0x06,0x01,0x04,0x01,0x82,0x37,0x14,0x02,0x02,/* [4437] OBJ_ms_smartcard_login */
-0x2B,0x06,0x01,0x04,0x01,0x82,0x37,0x14,0x02,0x03,/* [4447] OBJ_ms_upn */
-0x55,0x04,0x09,                              /* [4457] OBJ_streetAddress */
-0x55,0x04,0x11,                              /* [4460] OBJ_postalCode */
-0x2B,0x06,0x01,0x05,0x05,0x07,0x15,          /* [4463] OBJ_id_ppl */
-0x2B,0x06,0x01,0x05,0x05,0x07,0x01,0x0E,     /* [4470] OBJ_proxyCertInfo */
-0x2B,0x06,0x01,0x05,0x05,0x07,0x15,0x00,     /* [4478] OBJ_id_ppl_anyLanguage */
-0x2B,0x06,0x01,0x05,0x05,0x07,0x15,0x01,     /* [4486] OBJ_id_ppl_inheritAll */
-0x55,0x1D,0x1E,                              /* [4494] OBJ_name_constraints */
-0x2B,0x06,0x01,0x05,0x05,0x07,0x15,0x02,     /* [4497] OBJ_Independent */
-0x2A,0x86,0x48,0x86,0xF7,0x0D,0x01,0x01,0x0B,/* [4505] OBJ_sha256WithRSAEncryption */
-0x2A,0x86,0x48,0x86,0xF7,0x0D,0x01,0x01,0x0C,/* [4514] OBJ_sha384WithRSAEncryption */
-0x2A,0x86,0x48,0x86,0xF7,0x0D,0x01,0x01,0x0D,/* [4523] OBJ_sha512WithRSAEncryption */
-0x2A,0x86,0x48,0x86,0xF7,0x0D,0x01,0x01,0x0E,/* [4532] OBJ_sha224WithRSAEncryption */
-0x60,0x86,0x48,0x01,0x65,0x03,0x04,0x02,0x01,/* [4541] OBJ_sha256 */
-0x60,0x86,0x48,0x01,0x65,0x03,0x04,0x02,0x02,/* [4550] OBJ_sha384 */
-0x60,0x86,0x48,0x01,0x65,0x03,0x04,0x02,0x03,/* [4559] OBJ_sha512 */
-0x60,0x86,0x48,0x01,0x65,0x03,0x04,0x02,0x04,/* [4568] OBJ_sha224 */
-0x2B,                                        /* [4577] OBJ_identified_organization */
-0x2B,0x81,0x04,                              /* [4578] OBJ_certicom_arc */
-0x67,0x2B,                                   /* [4581] OBJ_wap */
-0x67,0x2B,0x0D,                              /* [4583] OBJ_wap_wsg */
-0x2A,0x86,0x48,0xCE,0x3D,0x01,0x02,0x03,     /* [4586] OBJ_X9_62_id_characteristic_two_basis */
-0x2A,0x86,0x48,0xCE,0x3D,0x01,0x02,0x03,0x01,/* [4594] OBJ_X9_62_onBasis */
-0x2A,0x86,0x48,0xCE,0x3D,0x01,0x02,0x03,0x02,/* [4603] OBJ_X9_62_tpBasis */
-0x2A,0x86,0x48,0xCE,0x3D,0x01,0x02,0x03,0x03,/* [4612] OBJ_X9_62_ppBasis */
-0x2A,0x86,0x48,0xCE,0x3D,0x03,0x00,0x01,     /* [4621] OBJ_X9_62_c2pnb163v1 */
-0x2A,0x86,0x48,0xCE,0x3D,0x03,0x00,0x02,     /* [4629] OBJ_X9_62_c2pnb163v2 */
-0x2A,0x86,0x48,0xCE,0x3D,0x03,0x00,0x03,     /* [4637] OBJ_X9_62_c2pnb163v3 */
-0x2A,0x86,0x48,0xCE,0x3D,0x03,0x00,0x04,     /* [4645] OBJ_X9_62_c2pnb176v1 */
-0x2A,0x86,0x48,0xCE,0x3D,0x03,0x00,0x05,     /* [4653] OBJ_X9_62_c2tnb191v1 */
-0x2A,0x86,0x48,0xCE,0x3D,0x03,0x00,0x06,     /* [4661] OBJ_X9_62_c2tnb191v2 */
-0x2A,0x86,0x48,0xCE,0x3D,0x03,0x00,0x07,     /* [4669] OBJ_X9_62_c2tnb191v3 */
-0x2A,0x86,0x48,0xCE,0x3D,0x03,0x00,0x08,     /* [4677] OBJ_X9_62_c2onb191v4 */
-0x2A,0x86,0x48,0xCE,0x3D,0x03,0x00,0x09,     /* [4685] OBJ_X9_62_c2onb191v5 */
-0x2A,0x86,0x48,0xCE,0x3D,0x03,0x00,0x0A,     /* [4693] OBJ_X9_62_c2pnb208w1 */
-0x2A,0x86,0x48,0xCE,0x3D,0x03,0x00,0x0B,     /* [4701] OBJ_X9_62_c2tnb239v1 */
-0x2A,0x86,0x48,0xCE,0x3D,0x03,0x00,0x0C,     /* [4709] OBJ_X9_62_c2tnb239v2 */
-0x2A,0x86,0x48,0xCE,0x3D,0x03,0x00,0x0D,     /* [4717] OBJ_X9_62_c2tnb239v3 */
-0x2A,0x86,0x48,0xCE,0x3D,0x03,0x00,0x0E,     /* [4725] OBJ_X9_62_c2onb239v4 */
-0x2A,0x86,0x48,0xCE,0x3D,0x03,0x00,0x0F,     /* [4733] OBJ_X9_62_c2onb239v5 */
-0x2A,0x86,0x48,0xCE,0x3D,0x03,0x00,0x10,     /* [4741] OBJ_X9_62_c2pnb272w1 */
-0x2A,0x86,0x48,0xCE,0x3D,0x03,0x00,0x11,     /* [4749] OBJ_X9_62_c2pnb304w1 */
-0x2A,0x86,0x48,0xCE,0x3D,0x03,0x00,0x12,     /* [4757] OBJ_X9_62_c2tnb359v1 */
-0x2A,0x86,0x48,0xCE,0x3D,0x03,0x00,0x13,     /* [4765] OBJ_X9_62_c2pnb368w1 */
-0x2A,0x86,0x48,0xCE,0x3D,0x03,0x00,0x14,     /* [4773] OBJ_X9_62_c2tnb431r1 */
-0x2B,0x81,0x04,0x00,0x06,                    /* [4781] OBJ_secp112r1 */
-0x2B,0x81,0x04,0x00,0x07,                    /* [4786] OBJ_secp112r2 */
-0x2B,0x81,0x04,0x00,0x1C,                    /* [4791] OBJ_secp128r1 */
-0x2B,0x81,0x04,0x00,0x1D,                    /* [4796] OBJ_secp128r2 */
-0x2B,0x81,0x04,0x00,0x09,                    /* [4801] OBJ_secp160k1 */
-0x2B,0x81,0x04,0x00,0x08,                    /* [4806] OBJ_secp160r1 */
-0x2B,0x81,0x04,0x00,0x1E,                    /* [4811] OBJ_secp160r2 */
-0x2B,0x81,0x04,0x00,0x1F,                    /* [4816] OBJ_secp192k1 */
-0x2B,0x81,0x04,0x00,0x20,                    /* [4821] OBJ_secp224k1 */
-0x2B,0x81,0x04,0x00,0x21,                    /* [4826] OBJ_secp224r1 */
-0x2B,0x81,0x04,0x00,0x0A,                    /* [4831] OBJ_secp256k1 */
-0x2B,0x81,0x04,0x00,0x22,                    /* [4836] OBJ_secp384r1 */
-0x2B,0x81,0x04,0x00,0x23,                    /* [4841] OBJ_secp521r1 */
-0x2B,0x81,0x04,0x00,0x04,                    /* [4846] OBJ_sect113r1 */
-0x2B,0x81,0x04,0x00,0x05,                    /* [4851] OBJ_sect113r2 */
-0x2B,0x81,0x04,0x00,0x16,                    /* [4856] OBJ_sect131r1 */
-0x2B,0x81,0x04,0x00,0x17,                    /* [4861] OBJ_sect131r2 */
-0x2B,0x81,0x04,0x00,0x01,                    /* [4866] OBJ_sect163k1 */
-0x2B,0x81,0x04,0x00,0x02,                    /* [4871] OBJ_sect163r1 */
-0x2B,0x81,0x04,0x00,0x0F,                    /* [4876] OBJ_sect163r2 */
-0x2B,0x81,0x04,0x00,0x18,                    /* [4881] OBJ_sect193r1 */
-0x2B,0x81,0x04,0x00,0x19,                    /* [4886] OBJ_sect193r2 */
-0x2B,0x81,0x04,0x00,0x1A,                    /* [4891] OBJ_sect233k1 */
-0x2B,0x81,0x04,0x00,0x1B,                    /* [4896] OBJ_sect233r1 */
-0x2B,0x81,0x04,0x00,0x03,                    /* [4901] OBJ_sect239k1 */
-0x2B,0x81,0x04,0x00,0x10,                    /* [4906] OBJ_sect283k1 */
-0x2B,0x81,0x04,0x00,0x11,                    /* [4911] OBJ_sect283r1 */
-0x2B,0x81,0x04,0x00,0x24,                    /* [4916] OBJ_sect409k1 */
-0x2B,0x81,0x04,0x00,0x25,                    /* [4921] OBJ_sect409r1 */
-0x2B,0x81,0x04,0x00,0x26,                    /* [4926] OBJ_sect571k1 */
-0x2B,0x81,0x04,0x00,0x27,                    /* [4931] OBJ_sect571r1 */
-0x67,0x2B,0x0D,0x04,0x01,                    /* [4936] OBJ_wap_wsg_idm_ecid_wtls1 */
-0x67,0x2B,0x0D,0x04,0x03,                    /* [4941] OBJ_wap_wsg_idm_ecid_wtls3 */
-0x67,0x2B,0x0D,0x04,0x04,                    /* [4946] OBJ_wap_wsg_idm_ecid_wtls4 */
-0x67,0x2B,0x0D,0x04,0x05,                    /* [4951] OBJ_wap_wsg_idm_ecid_wtls5 */
-0x67,0x2B,0x0D,0x04,0x06,                    /* [4956] OBJ_wap_wsg_idm_ecid_wtls6 */
-0x67,0x2B,0x0D,0x04,0x07,                    /* [4961] OBJ_wap_wsg_idm_ecid_wtls7 */
-0x67,0x2B,0x0D,0x04,0x08,                    /* [4966] OBJ_wap_wsg_idm_ecid_wtls8 */
-0x67,0x2B,0x0D,0x04,0x09,                    /* [4971] OBJ_wap_wsg_idm_ecid_wtls9 */
-0x67,0x2B,0x0D,0x04,0x0A,                    /* [4976] OBJ_wap_wsg_idm_ecid_wtls10 */
-0x67,0x2B,0x0D,0x04,0x0B,                    /* [4981] OBJ_wap_wsg_idm_ecid_wtls11 */
-0x67,0x2B,0x0D,0x04,0x0C,                    /* [4986] OBJ_wap_wsg_idm_ecid_wtls12 */
-0x55,0x1D,0x20,0x00,                         /* [4991] OBJ_any_policy */
-0x55,0x1D,0x21,                              /* [4995] OBJ_policy_mappings */
-0x55,0x1D,0x36,                              /* [4998] OBJ_inhibit_any_policy */
-0x2A,0x83,0x08,0x8C,0x9A,0x4B,0x3D,0x01,0x01,0x01,0x02,/* [5001] OBJ_camellia_128_cbc */
-0x2A,0x83,0x08,0x8C,0x9A,0x4B,0x3D,0x01,0x01,0x01,0x03,/* [5012] OBJ_camellia_192_cbc */
-0x2A,0x83,0x08,0x8C,0x9A,0x4B,0x3D,0x01,0x01,0x01,0x04,/* [5023] OBJ_camellia_256_cbc */
-0x03,0xA2,0x31,0x05,0x03,0x01,0x09,0x01,     /* [5034] OBJ_camellia_128_ecb */
-0x03,0xA2,0x31,0x05,0x03,0x01,0x09,0x15,     /* [5042] OBJ_camellia_192_ecb */
-0x03,0xA2,0x31,0x05,0x03,0x01,0x09,0x29,     /* [5050] OBJ_camellia_256_ecb */
-0x03,0xA2,0x31,0x05,0x03,0x01,0x09,0x04,     /* [5058] OBJ_camellia_128_cfb128 */
-0x03,0xA2,0x31,0x05,0x03,0x01,0x09,0x18,     /* [5066] OBJ_camellia_192_cfb128 */
-0x03,0xA2,0x31,0x05,0x03,0x01,0x09,0x2C,     /* [5074] OBJ_camellia_256_cfb128 */
-0x03,0xA2,0x31,0x05,0x03,0x01,0x09,0x03,     /* [5082] OBJ_camellia_128_ofb128 */
-0x03,0xA2,0x31,0x05,0x03,0x01,0x09,0x17,     /* [5090] OBJ_camellia_192_ofb128 */
-0x03,0xA2,0x31,0x05,0x03,0x01,0x09,0x2B,     /* [5098] OBJ_camellia_256_ofb128 */
-0x55,0x1D,0x09,                              /* [5106] OBJ_subject_directory_attributes */
-0x55,0x1D,0x1C,                              /* [5109] OBJ_issuing_distribution_point */
-0x55,0x1D,0x1D,                              /* [5112] OBJ_certificate_issuer */
-};
-
-static ASN1_OBJECT nid_objs[NUM_NID]={
-{"UNDEF","undefined",NID_undef,1,&(lvalues[0]),0},
-{"rsadsi","RSA Data Security, Inc.",NID_rsadsi,6,&(lvalues[1]),0},
-{"pkcs","RSA Data Security, Inc. PKCS",NID_pkcs,7,&(lvalues[7]),0},
-{"MD2","md2",NID_md2,8,&(lvalues[14]),0},
-{"MD5","md5",NID_md5,8,&(lvalues[22]),0},
-{"RC4","rc4",NID_rc4,8,&(lvalues[30]),0},
-{"rsaEncryption","rsaEncryption",NID_rsaEncryption,9,&(lvalues[38]),0},
-{"RSA-MD2","md2WithRSAEncryption",NID_md2WithRSAEncryption,9,
-	&(lvalues[47]),0},
-{"RSA-MD5","md5WithRSAEncryption",NID_md5WithRSAEncryption,9,
-	&(lvalues[56]),0},
-{"PBE-MD2-DES","pbeWithMD2AndDES-CBC",NID_pbeWithMD2AndDES_CBC,9,
-	&(lvalues[65]),0},
-{"PBE-MD5-DES","pbeWithMD5AndDES-CBC",NID_pbeWithMD5AndDES_CBC,9,
-	&(lvalues[74]),0},
-{"X500","directory services (X.500)",NID_X500,1,&(lvalues[83]),0},
-{"X509","X509",NID_X509,2,&(lvalues[84]),0},
-{"CN","commonName",NID_commonName,3,&(lvalues[86]),0},
-{"C","countryName",NID_countryName,3,&(lvalues[89]),0},
-{"L","localityName",NID_localityName,3,&(lvalues[92]),0},
-{"ST","stateOrProvinceName",NID_stateOrProvinceName,3,&(lvalues[95]),0},
-{"O","organizationName",NID_organizationName,3,&(lvalues[98]),0},
-{"OU","organizationalUnitName",NID_organizationalUnitName,3,
-	&(lvalues[101]),0},
-{"RSA","rsa",NID_rsa,4,&(lvalues[104]),0},
-{"pkcs7","pkcs7",NID_pkcs7,8,&(lvalues[108]),0},
-{"pkcs7-data","pkcs7-data",NID_pkcs7_data,9,&(lvalues[116]),0},
-{"pkcs7-signedData","pkcs7-signedData",NID_pkcs7_signed,9,
-	&(lvalues[125]),0},
-{"pkcs7-envelopedData","pkcs7-envelopedData",NID_pkcs7_enveloped,9,
-	&(lvalues[134]),0},
-{"pkcs7-signedAndEnvelopedData","pkcs7-signedAndEnvelopedData",
-	NID_pkcs7_signedAndEnveloped,9,&(lvalues[143]),0},
-{"pkcs7-digestData","pkcs7-digestData",NID_pkcs7_digest,9,
-	&(lvalues[152]),0},
-{"pkcs7-encryptedData","pkcs7-encryptedData",NID_pkcs7_encrypted,9,
-	&(lvalues[161]),0},
-{"pkcs3","pkcs3",NID_pkcs3,8,&(lvalues[170]),0},
-{"dhKeyAgreement","dhKeyAgreement",NID_dhKeyAgreement,9,
-	&(lvalues[178]),0},
-{"DES-ECB","des-ecb",NID_des_ecb,5,&(lvalues[187]),0},
-{"DES-CFB","des-cfb",NID_des_cfb64,5,&(lvalues[192]),0},
-{"DES-CBC","des-cbc",NID_des_cbc,5,&(lvalues[197]),0},
-{"DES-EDE","des-ede",NID_des_ede_ecb,5,&(lvalues[202]),0},
-{"DES-EDE3","des-ede3",NID_des_ede3_ecb,0,NULL,0},
-{"IDEA-CBC","idea-cbc",NID_idea_cbc,11,&(lvalues[207]),0},
-{"IDEA-CFB","idea-cfb",NID_idea_cfb64,0,NULL,0},
-{"IDEA-ECB","idea-ecb",NID_idea_ecb,0,NULL,0},
-{"RC2-CBC","rc2-cbc",NID_rc2_cbc,8,&(lvalues[218]),0},
-{"RC2-ECB","rc2-ecb",NID_rc2_ecb,0,NULL,0},
-{"RC2-CFB","rc2-cfb",NID_rc2_cfb64,0,NULL,0},
-{"RC2-OFB","rc2-ofb",NID_rc2_ofb64,0,NULL,0},
-{"SHA","sha",NID_sha,5,&(lvalues[226]),0},
-{"RSA-SHA","shaWithRSAEncryption",NID_shaWithRSAEncryption,5,
-	&(lvalues[231]),0},
-{"DES-EDE-CBC","des-ede-cbc",NID_des_ede_cbc,0,NULL,0},
-{"DES-EDE3-CBC","des-ede3-cbc",NID_des_ede3_cbc,8,&(lvalues[236]),0},
-{"DES-OFB","des-ofb",NID_des_ofb64,5,&(lvalues[244]),0},
-{"IDEA-OFB","idea-ofb",NID_idea_ofb64,0,NULL,0},
-{"pkcs9","pkcs9",NID_pkcs9,8,&(lvalues[249]),0},
-{"emailAddress","emailAddress",NID_pkcs9_emailAddress,9,
-	&(lvalues[257]),0},
-{"unstructuredName","unstructuredName",NID_pkcs9_unstructuredName,9,
-	&(lvalues[266]),0},
-{"contentType","contentType",NID_pkcs9_contentType,9,&(lvalues[275]),0},
-{"messageDigest","messageDigest",NID_pkcs9_messageDigest,9,
-	&(lvalues[284]),0},
-{"signingTime","signingTime",NID_pkcs9_signingTime,9,&(lvalues[293]),0},
-{"countersignature","countersignature",NID_pkcs9_countersignature,9,
-	&(lvalues[302]),0},
-{"challengePassword","challengePassword",NID_pkcs9_challengePassword,
-	9,&(lvalues[311]),0},
-{"unstructuredAddress","unstructuredAddress",
-	NID_pkcs9_unstructuredAddress,9,&(lvalues[320]),0},
-{"extendedCertificateAttributes","extendedCertificateAttributes",
-	NID_pkcs9_extCertAttributes,9,&(lvalues[329]),0},
-{"Netscape","Netscape Communications Corp.",NID_netscape,7,
-	&(lvalues[338]),0},
-{"nsCertExt","Netscape Certificate Extension",
-	NID_netscape_cert_extension,8,&(lvalues[345]),0},
-{"nsDataType","Netscape Data Type",NID_netscape_data_type,8,
-	&(lvalues[353]),0},
-{"DES-EDE-CFB","des-ede-cfb",NID_des_ede_cfb64,0,NULL,0},
-{"DES-EDE3-CFB","des-ede3-cfb",NID_des_ede3_cfb64,0,NULL,0},
-{"DES-EDE-OFB","des-ede-ofb",NID_des_ede_ofb64,0,NULL,0},
-{"DES-EDE3-OFB","des-ede3-ofb",NID_des_ede3_ofb64,0,NULL,0},
-{"SHA1","sha1",NID_sha1,5,&(lvalues[361]),0},
-{"RSA-SHA1","sha1WithRSAEncryption",NID_sha1WithRSAEncryption,9,
-	&(lvalues[366]),0},
-{"DSA-SHA","dsaWithSHA",NID_dsaWithSHA,5,&(lvalues[375]),0},
-{"DSA-old","dsaEncryption-old",NID_dsa_2,5,&(lvalues[380]),0},
-{"PBE-SHA1-RC2-64","pbeWithSHA1AndRC2-CBC",NID_pbeWithSHA1AndRC2_CBC,
-	9,&(lvalues[385]),0},
-{"PBKDF2","PBKDF2",NID_id_pbkdf2,9,&(lvalues[394]),0},
-{"DSA-SHA1-old","dsaWithSHA1-old",NID_dsaWithSHA1_2,5,&(lvalues[403]),0},
-{"nsCertType","Netscape Cert Type",NID_netscape_cert_type,9,
-	&(lvalues[408]),0},
-{"nsBaseUrl","Netscape Base Url",NID_netscape_base_url,9,
-	&(lvalues[417]),0},
-{"nsRevocationUrl","Netscape Revocation Url",
-	NID_netscape_revocation_url,9,&(lvalues[426]),0},
-{"nsCaRevocationUrl","Netscape CA Revocation Url",
-	NID_netscape_ca_revocation_url,9,&(lvalues[435]),0},
-{"nsRenewalUrl","Netscape Renewal Url",NID_netscape_renewal_url,9,
-	&(lvalues[444]),0},
-{"nsCaPolicyUrl","Netscape CA Policy Url",NID_netscape_ca_policy_url,
-	9,&(lvalues[453]),0},
-{"nsSslServerName","Netscape SSL Server Name",
-	NID_netscape_ssl_server_name,9,&(lvalues[462]),0},
-{"nsComment","Netscape Comment",NID_netscape_comment,9,&(lvalues[471]),0},
-{"nsCertSequence","Netscape Certificate Sequence",
-	NID_netscape_cert_sequence,9,&(lvalues[480]),0},
-{"DESX-CBC","desx-cbc",NID_desx_cbc,0,NULL,0},
-{"id-ce","id-ce",NID_id_ce,2,&(lvalues[489]),0},
-{"subjectKeyIdentifier","X509v3 Subject Key Identifier",
-	NID_subject_key_identifier,3,&(lvalues[491]),0},
-{"keyUsage","X509v3 Key Usage",NID_key_usage,3,&(lvalues[494]),0},
-{"privateKeyUsagePeriod","X509v3 Private Key Usage Period",
-	NID_private_key_usage_period,3,&(lvalues[497]),0},
-{"subjectAltName","X509v3 Subject Alternative Name",
-	NID_subject_alt_name,3,&(lvalues[500]),0},
-{"issuerAltName","X509v3 Issuer Alternative Name",NID_issuer_alt_name,
-	3,&(lvalues[503]),0},
-{"basicConstraints","X509v3 Basic Constraints",NID_basic_constraints,
-	3,&(lvalues[506]),0},
-{"crlNumber","X509v3 CRL Number",NID_crl_number,3,&(lvalues[509]),0},
-{"certificatePolicies","X509v3 Certificate Policies",
-	NID_certificate_policies,3,&(lvalues[512]),0},
-{"authorityKeyIdentifier","X509v3 Authority Key Identifier",
-	NID_authority_key_identifier,3,&(lvalues[515]),0},
-{"BF-CBC","bf-cbc",NID_bf_cbc,9,&(lvalues[518]),0},
-{"BF-ECB","bf-ecb",NID_bf_ecb,0,NULL,0},
-{"BF-CFB","bf-cfb",NID_bf_cfb64,0,NULL,0},
-{"BF-OFB","bf-ofb",NID_bf_ofb64,0,NULL,0},
-{"MDC2","mdc2",NID_mdc2,4,&(lvalues[527]),0},
-{"RSA-MDC2","mdc2WithRSA",NID_mdc2WithRSA,4,&(lvalues[531]),0},
-{"RC4-40","rc4-40",NID_rc4_40,0,NULL,0},
-{"RC2-40-CBC","rc2-40-cbc",NID_rc2_40_cbc,0,NULL,0},
-{"GN","givenName",NID_givenName,3,&(lvalues[535]),0},
-{"SN","surname",NID_surname,3,&(lvalues[538]),0},
-{"initials","initials",NID_initials,3,&(lvalues[541]),0},
-{NULL,NULL,NID_undef,0,NULL,0},
-{"crlDistributionPoints","X509v3 CRL Distribution Points",
-	NID_crl_distribution_points,3,&(lvalues[544]),0},
-{"RSA-NP-MD5","md5WithRSA",NID_md5WithRSA,5,&(lvalues[547]),0},
-{"serialNumber","serialNumber",NID_serialNumber,3,&(lvalues[552]),0},
-{"title","title",NID_title,3,&(lvalues[555]),0},
-{"description","description",NID_description,3,&(lvalues[558]),0},
-{"CAST5-CBC","cast5-cbc",NID_cast5_cbc,9,&(lvalues[561]),0},
-{"CAST5-ECB","cast5-ecb",NID_cast5_ecb,0,NULL,0},
-{"CAST5-CFB","cast5-cfb",NID_cast5_cfb64,0,NULL,0},
-{"CAST5-OFB","cast5-ofb",NID_cast5_ofb64,0,NULL,0},
-{"pbeWithMD5AndCast5CBC","pbeWithMD5AndCast5CBC",
-	NID_pbeWithMD5AndCast5_CBC,9,&(lvalues[570]),0},
-{"DSA-SHA1","dsaWithSHA1",NID_dsaWithSHA1,7,&(lvalues[579]),0},
-{"MD5-SHA1","md5-sha1",NID_md5_sha1,0,NULL,0},
-{"RSA-SHA1-2","sha1WithRSA",NID_sha1WithRSA,5,&(lvalues[586]),0},
-{"DSA","dsaEncryption",NID_dsa,7,&(lvalues[591]),0},
-{"RIPEMD160","ripemd160",NID_ripemd160,5,&(lvalues[598]),0},
-{NULL,NULL,NID_undef,0,NULL,0},
-{"RSA-RIPEMD160","ripemd160WithRSA",NID_ripemd160WithRSA,6,
-	&(lvalues[603]),0},
-{"RC5-CBC","rc5-cbc",NID_rc5_cbc,8,&(lvalues[609]),0},
-{"RC5-ECB","rc5-ecb",NID_rc5_ecb,0,NULL,0},
-{"RC5-CFB","rc5-cfb",NID_rc5_cfb64,0,NULL,0},
-{"RC5-OFB","rc5-ofb",NID_rc5_ofb64,0,NULL,0},
-{"RLE","run length compression",NID_rle_compression,6,&(lvalues[617]),0},
-{"ZLIB","zlib compression",NID_zlib_compression,6,&(lvalues[623]),0},
-{"extendedKeyUsage","X509v3 Extended Key Usage",NID_ext_key_usage,3,
-	&(lvalues[629]),0},
-{"PKIX","PKIX",NID_id_pkix,6,&(lvalues[632]),0},
-{"id-kp","id-kp",NID_id_kp,7,&(lvalues[638]),0},
-{"serverAuth","TLS Web Server Authentication",NID_server_auth,8,
-	&(lvalues[645]),0},
-{"clientAuth","TLS Web Client Authentication",NID_client_auth,8,
-	&(lvalues[653]),0},
-{"codeSigning","Code Signing",NID_code_sign,8,&(lvalues[661]),0},
-{"emailProtection","E-mail Protection",NID_email_protect,8,
-	&(lvalues[669]),0},
-{"timeStamping","Time Stamping",NID_time_stamp,8,&(lvalues[677]),0},
-{"msCodeInd","Microsoft Individual Code Signing",NID_ms_code_ind,10,
-	&(lvalues[685]),0},
-{"msCodeCom","Microsoft Commercial Code Signing",NID_ms_code_com,10,
-	&(lvalues[695]),0},
-{"msCTLSign","Microsoft Trust List Signing",NID_ms_ctl_sign,10,
-	&(lvalues[705]),0},
-{"msSGC","Microsoft Server Gated Crypto",NID_ms_sgc,10,&(lvalues[715]),0},
-{"msEFS","Microsoft Encrypted File System",NID_ms_efs,10,
-	&(lvalues[725]),0},
-{"nsSGC","Netscape Server Gated Crypto",NID_ns_sgc,9,&(lvalues[735]),0},
-{"deltaCRL","X509v3 Delta CRL Indicator",NID_delta_crl,3,
-	&(lvalues[744]),0},
-{"CRLReason","X509v3 CRL Reason Code",NID_crl_reason,3,&(lvalues[747]),0},
-{"invalidityDate","Invalidity Date",NID_invalidity_date,3,
-	&(lvalues[750]),0},
-{"SXNetID","Strong Extranet ID",NID_sxnet,5,&(lvalues[753]),0},
-{"PBE-SHA1-RC4-128","pbeWithSHA1And128BitRC4",
-	NID_pbe_WithSHA1And128BitRC4,10,&(lvalues[758]),0},
-{"PBE-SHA1-RC4-40","pbeWithSHA1And40BitRC4",
-	NID_pbe_WithSHA1And40BitRC4,10,&(lvalues[768]),0},
-{"PBE-SHA1-3DES","pbeWithSHA1And3-KeyTripleDES-CBC",
-	NID_pbe_WithSHA1And3_Key_TripleDES_CBC,10,&(lvalues[778]),0},
-{"PBE-SHA1-2DES","pbeWithSHA1And2-KeyTripleDES-CBC",
-	NID_pbe_WithSHA1And2_Key_TripleDES_CBC,10,&(lvalues[788]),0},
-{"PBE-SHA1-RC2-128","pbeWithSHA1And128BitRC2-CBC",
-	NID_pbe_WithSHA1And128BitRC2_CBC,10,&(lvalues[798]),0},
-{"PBE-SHA1-RC2-40","pbeWithSHA1And40BitRC2-CBC",
-	NID_pbe_WithSHA1And40BitRC2_CBC,10,&(lvalues[808]),0},
-{"keyBag","keyBag",NID_keyBag,11,&(lvalues[818]),0},
-{"pkcs8ShroudedKeyBag","pkcs8ShroudedKeyBag",NID_pkcs8ShroudedKeyBag,
-	11,&(lvalues[829]),0},
-{"certBag","certBag",NID_certBag,11,&(lvalues[840]),0},
-{"crlBag","crlBag",NID_crlBag,11,&(lvalues[851]),0},
-{"secretBag","secretBag",NID_secretBag,11,&(lvalues[862]),0},
-{"safeContentsBag","safeContentsBag",NID_safeContentsBag,11,
-	&(lvalues[873]),0},
-{"friendlyName","friendlyName",NID_friendlyName,9,&(lvalues[884]),0},
-{"localKeyID","localKeyID",NID_localKeyID,9,&(lvalues[893]),0},
-{"x509Certificate","x509Certificate",NID_x509Certificate,10,
-	&(lvalues[902]),0},
-{"sdsiCertificate","sdsiCertificate",NID_sdsiCertificate,10,
-	&(lvalues[912]),0},
-{"x509Crl","x509Crl",NID_x509Crl,10,&(lvalues[922]),0},
-{"PBES2","PBES2",NID_pbes2,9,&(lvalues[932]),0},
-{"PBMAC1","PBMAC1",NID_pbmac1,9,&(lvalues[941]),0},
-{"hmacWithSHA1","hmacWithSHA1",NID_hmacWithSHA1,8,&(lvalues[950]),0},
-{"id-qt-cps","Policy Qualifier CPS",NID_id_qt_cps,8,&(lvalues[958]),0},
-{"id-qt-unotice","Policy Qualifier User Notice",NID_id_qt_unotice,8,
-	&(lvalues[966]),0},
-{"RC2-64-CBC","rc2-64-cbc",NID_rc2_64_cbc,0,NULL,0},
-{"SMIME-CAPS","S/MIME Capabilities",NID_SMIMECapabilities,9,
-	&(lvalues[974]),0},
-{"PBE-MD2-RC2-64","pbeWithMD2AndRC2-CBC",NID_pbeWithMD2AndRC2_CBC,9,
-	&(lvalues[983]),0},
-{"PBE-MD5-RC2-64","pbeWithMD5AndRC2-CBC",NID_pbeWithMD5AndRC2_CBC,9,
-	&(lvalues[992]),0},
-{"PBE-SHA1-DES","pbeWithSHA1AndDES-CBC",NID_pbeWithSHA1AndDES_CBC,9,
-	&(lvalues[1001]),0},
-{"msExtReq","Microsoft Extension Request",NID_ms_ext_req,10,
-	&(lvalues[1010]),0},
-{"extReq","Extension Request",NID_ext_req,9,&(lvalues[1020]),0},
-{"name","name",NID_name,3,&(lvalues[1029]),0},
-{"dnQualifier","dnQualifier",NID_dnQualifier,3,&(lvalues[1032]),0},
-{"id-pe","id-pe",NID_id_pe,7,&(lvalues[1035]),0},
-{"id-ad","id-ad",NID_id_ad,7,&(lvalues[1042]),0},
-{"authorityInfoAccess","Authority Information Access",NID_info_access,
-	8,&(lvalues[1049]),0},
-{"OCSP","OCSP",NID_ad_OCSP,8,&(lvalues[1057]),0},
-{"caIssuers","CA Issuers",NID_ad_ca_issuers,8,&(lvalues[1065]),0},
-{"OCSPSigning","OCSP Signing",NID_OCSP_sign,8,&(lvalues[1073]),0},
-{"ISO","iso",NID_iso,1,&(lvalues[1081]),0},
-{"member-body","ISO Member Body",NID_member_body,1,&(lvalues[1082]),0},
-{"ISO-US","ISO US Member Body",NID_ISO_US,3,&(lvalues[1083]),0},
-{"X9-57","X9.57",NID_X9_57,5,&(lvalues[1086]),0},
-{"X9cm","X9.57 CM ?",NID_X9cm,6,&(lvalues[1091]),0},
-{"pkcs1","pkcs1",NID_pkcs1,8,&(lvalues[1097]),0},
-{"pkcs5","pkcs5",NID_pkcs5,8,&(lvalues[1105]),0},
-{"SMIME","S/MIME",NID_SMIME,9,&(lvalues[1113]),0},
-{"id-smime-mod","id-smime-mod",NID_id_smime_mod,10,&(lvalues[1122]),0},
-{"id-smime-ct","id-smime-ct",NID_id_smime_ct,10,&(lvalues[1132]),0},
-{"id-smime-aa","id-smime-aa",NID_id_smime_aa,10,&(lvalues[1142]),0},
-{"id-smime-alg","id-smime-alg",NID_id_smime_alg,10,&(lvalues[1152]),0},
-{"id-smime-cd","id-smime-cd",NID_id_smime_cd,10,&(lvalues[1162]),0},
-{"id-smime-spq","id-smime-spq",NID_id_smime_spq,10,&(lvalues[1172]),0},
-{"id-smime-cti","id-smime-cti",NID_id_smime_cti,10,&(lvalues[1182]),0},
-{"id-smime-mod-cms","id-smime-mod-cms",NID_id_smime_mod_cms,11,
-	&(lvalues[1192]),0},
-{"id-smime-mod-ess","id-smime-mod-ess",NID_id_smime_mod_ess,11,
-	&(lvalues[1203]),0},
-{"id-smime-mod-oid","id-smime-mod-oid",NID_id_smime_mod_oid,11,
-	&(lvalues[1214]),0},
-{"id-smime-mod-msg-v3","id-smime-mod-msg-v3",NID_id_smime_mod_msg_v3,
-	11,&(lvalues[1225]),0},
-{"id-smime-mod-ets-eSignature-88","id-smime-mod-ets-eSignature-88",
-	NID_id_smime_mod_ets_eSignature_88,11,&(lvalues[1236]),0},
-{"id-smime-mod-ets-eSignature-97","id-smime-mod-ets-eSignature-97",
-	NID_id_smime_mod_ets_eSignature_97,11,&(lvalues[1247]),0},
-{"id-smime-mod-ets-eSigPolicy-88","id-smime-mod-ets-eSigPolicy-88",
-	NID_id_smime_mod_ets_eSigPolicy_88,11,&(lvalues[1258]),0},
-{"id-smime-mod-ets-eSigPolicy-97","id-smime-mod-ets-eSigPolicy-97",
-	NID_id_smime_mod_ets_eSigPolicy_97,11,&(lvalues[1269]),0},
-{"id-smime-ct-receipt","id-smime-ct-receipt",NID_id_smime_ct_receipt,
-	11,&(lvalues[1280]),0},
-{"id-smime-ct-authData","id-smime-ct-authData",
-	NID_id_smime_ct_authData,11,&(lvalues[1291]),0},
-{"id-smime-ct-publishCert","id-smime-ct-publishCert",
-	NID_id_smime_ct_publishCert,11,&(lvalues[1302]),0},
-{"id-smime-ct-TSTInfo","id-smime-ct-TSTInfo",NID_id_smime_ct_TSTInfo,
-	11,&(lvalues[1313]),0},
-{"id-smime-ct-TDTInfo","id-smime-ct-TDTInfo",NID_id_smime_ct_TDTInfo,
-	11,&(lvalues[1324]),0},
-{"id-smime-ct-contentInfo","id-smime-ct-contentInfo",
-	NID_id_smime_ct_contentInfo,11,&(lvalues[1335]),0},
-{"id-smime-ct-DVCSRequestData","id-smime-ct-DVCSRequestData",
-	NID_id_smime_ct_DVCSRequestData,11,&(lvalues[1346]),0},
-{"id-smime-ct-DVCSResponseData","id-smime-ct-DVCSResponseData",
-	NID_id_smime_ct_DVCSResponseData,11,&(lvalues[1357]),0},
-{"id-smime-aa-receiptRequest","id-smime-aa-receiptRequest",
-	NID_id_smime_aa_receiptRequest,11,&(lvalues[1368]),0},
-{"id-smime-aa-securityLabel","id-smime-aa-securityLabel",
-	NID_id_smime_aa_securityLabel,11,&(lvalues[1379]),0},
-{"id-smime-aa-mlExpandHistory","id-smime-aa-mlExpandHistory",
-	NID_id_smime_aa_mlExpandHistory,11,&(lvalues[1390]),0},
-{"id-smime-aa-contentHint","id-smime-aa-contentHint",
-	NID_id_smime_aa_contentHint,11,&(lvalues[1401]),0},
-{"id-smime-aa-msgSigDigest","id-smime-aa-msgSigDigest",
-	NID_id_smime_aa_msgSigDigest,11,&(lvalues[1412]),0},
-{"id-smime-aa-encapContentType","id-smime-aa-encapContentType",
-	NID_id_smime_aa_encapContentType,11,&(lvalues[1423]),0},
-{"id-smime-aa-contentIdentifier","id-smime-aa-contentIdentifier",
-	NID_id_smime_aa_contentIdentifier,11,&(lvalues[1434]),0},
-{"id-smime-aa-macValue","id-smime-aa-macValue",
-	NID_id_smime_aa_macValue,11,&(lvalues[1445]),0},
-{"id-smime-aa-equivalentLabels","id-smime-aa-equivalentLabels",
-	NID_id_smime_aa_equivalentLabels,11,&(lvalues[1456]),0},
-{"id-smime-aa-contentReference","id-smime-aa-contentReference",
-	NID_id_smime_aa_contentReference,11,&(lvalues[1467]),0},
-{"id-smime-aa-encrypKeyPref","id-smime-aa-encrypKeyPref",
-	NID_id_smime_aa_encrypKeyPref,11,&(lvalues[1478]),0},
-{"id-smime-aa-signingCertificate","id-smime-aa-signingCertificate",
-	NID_id_smime_aa_signingCertificate,11,&(lvalues[1489]),0},
-{"id-smime-aa-smimeEncryptCerts","id-smime-aa-smimeEncryptCerts",
-	NID_id_smime_aa_smimeEncryptCerts,11,&(lvalues[1500]),0},
-{"id-smime-aa-timeStampToken","id-smime-aa-timeStampToken",
-	NID_id_smime_aa_timeStampToken,11,&(lvalues[1511]),0},
-{"id-smime-aa-ets-sigPolicyId","id-smime-aa-ets-sigPolicyId",
-	NID_id_smime_aa_ets_sigPolicyId,11,&(lvalues[1522]),0},
-{"id-smime-aa-ets-commitmentType","id-smime-aa-ets-commitmentType",
-	NID_id_smime_aa_ets_commitmentType,11,&(lvalues[1533]),0},
-{"id-smime-aa-ets-signerLocation","id-smime-aa-ets-signerLocation",
-	NID_id_smime_aa_ets_signerLocation,11,&(lvalues[1544]),0},
-{"id-smime-aa-ets-signerAttr","id-smime-aa-ets-signerAttr",
-	NID_id_smime_aa_ets_signerAttr,11,&(lvalues[1555]),0},
-{"id-smime-aa-ets-otherSigCert","id-smime-aa-ets-otherSigCert",
-	NID_id_smime_aa_ets_otherSigCert,11,&(lvalues[1566]),0},
-{"id-smime-aa-ets-contentTimestamp",
-	"id-smime-aa-ets-contentTimestamp",
-	NID_id_smime_aa_ets_contentTimestamp,11,&(lvalues[1577]),0},
-{"id-smime-aa-ets-CertificateRefs","id-smime-aa-ets-CertificateRefs",
-	NID_id_smime_aa_ets_CertificateRefs,11,&(lvalues[1588]),0},
-{"id-smime-aa-ets-RevocationRefs","id-smime-aa-ets-RevocationRefs",
-	NID_id_smime_aa_ets_RevocationRefs,11,&(lvalues[1599]),0},
-{"id-smime-aa-ets-certValues","id-smime-aa-ets-certValues",
-	NID_id_smime_aa_ets_certValues,11,&(lvalues[1610]),0},
-{"id-smime-aa-ets-revocationValues",
-	"id-smime-aa-ets-revocationValues",
-	NID_id_smime_aa_ets_revocationValues,11,&(lvalues[1621]),0},
-{"id-smime-aa-ets-escTimeStamp","id-smime-aa-ets-escTimeStamp",
-	NID_id_smime_aa_ets_escTimeStamp,11,&(lvalues[1632]),0},
-{"id-smime-aa-ets-certCRLTimestamp",
-	"id-smime-aa-ets-certCRLTimestamp",
-	NID_id_smime_aa_ets_certCRLTimestamp,11,&(lvalues[1643]),0},
-{"id-smime-aa-ets-archiveTimeStamp",
-	"id-smime-aa-ets-archiveTimeStamp",
-	NID_id_smime_aa_ets_archiveTimeStamp,11,&(lvalues[1654]),0},
-{"id-smime-aa-signatureType","id-smime-aa-signatureType",
-	NID_id_smime_aa_signatureType,11,&(lvalues[1665]),0},
-{"id-smime-aa-dvcs-dvc","id-smime-aa-dvcs-dvc",
-	NID_id_smime_aa_dvcs_dvc,11,&(lvalues[1676]),0},
-{"id-smime-alg-ESDHwith3DES","id-smime-alg-ESDHwith3DES",
-	NID_id_smime_alg_ESDHwith3DES,11,&(lvalues[1687]),0},
-{"id-smime-alg-ESDHwithRC2","id-smime-alg-ESDHwithRC2",
-	NID_id_smime_alg_ESDHwithRC2,11,&(lvalues[1698]),0},
-{"id-smime-alg-3DESwrap","id-smime-alg-3DESwrap",
-	NID_id_smime_alg_3DESwrap,11,&(lvalues[1709]),0},
-{"id-smime-alg-RC2wrap","id-smime-alg-RC2wrap",
-	NID_id_smime_alg_RC2wrap,11,&(lvalues[1720]),0},
-{"id-smime-alg-ESDH","id-smime-alg-ESDH",NID_id_smime_alg_ESDH,11,
-	&(lvalues[1731]),0},
-{"id-smime-alg-CMS3DESwrap","id-smime-alg-CMS3DESwrap",
-	NID_id_smime_alg_CMS3DESwrap,11,&(lvalues[1742]),0},
-{"id-smime-alg-CMSRC2wrap","id-smime-alg-CMSRC2wrap",
-	NID_id_smime_alg_CMSRC2wrap,11,&(lvalues[1753]),0},
-{"id-smime-cd-ldap","id-smime-cd-ldap",NID_id_smime_cd_ldap,11,
-	&(lvalues[1764]),0},
-{"id-smime-spq-ets-sqt-uri","id-smime-spq-ets-sqt-uri",
-	NID_id_smime_spq_ets_sqt_uri,11,&(lvalues[1775]),0},
-{"id-smime-spq-ets-sqt-unotice","id-smime-spq-ets-sqt-unotice",
-	NID_id_smime_spq_ets_sqt_unotice,11,&(lvalues[1786]),0},
-{"id-smime-cti-ets-proofOfOrigin","id-smime-cti-ets-proofOfOrigin",
-	NID_id_smime_cti_ets_proofOfOrigin,11,&(lvalues[1797]),0},
-{"id-smime-cti-ets-proofOfReceipt","id-smime-cti-ets-proofOfReceipt",
-	NID_id_smime_cti_ets_proofOfReceipt,11,&(lvalues[1808]),0},
-{"id-smime-cti-ets-proofOfDelivery",
-	"id-smime-cti-ets-proofOfDelivery",
-	NID_id_smime_cti_ets_proofOfDelivery,11,&(lvalues[1819]),0},
-{"id-smime-cti-ets-proofOfSender","id-smime-cti-ets-proofOfSender",
-	NID_id_smime_cti_ets_proofOfSender,11,&(lvalues[1830]),0},
-{"id-smime-cti-ets-proofOfApproval",
-	"id-smime-cti-ets-proofOfApproval",
-	NID_id_smime_cti_ets_proofOfApproval,11,&(lvalues[1841]),0},
-{"id-smime-cti-ets-proofOfCreation",
-	"id-smime-cti-ets-proofOfCreation",
-	NID_id_smime_cti_ets_proofOfCreation,11,&(lvalues[1852]),0},
-{"MD4","md4",NID_md4,8,&(lvalues[1863]),0},
-{"id-pkix-mod","id-pkix-mod",NID_id_pkix_mod,7,&(lvalues[1871]),0},
-{"id-qt","id-qt",NID_id_qt,7,&(lvalues[1878]),0},
-{"id-it","id-it",NID_id_it,7,&(lvalues[1885]),0},
-{"id-pkip","id-pkip",NID_id_pkip,7,&(lvalues[1892]),0},
-{"id-alg","id-alg",NID_id_alg,7,&(lvalues[1899]),0},
-{"id-cmc","id-cmc",NID_id_cmc,7,&(lvalues[1906]),0},
-{"id-on","id-on",NID_id_on,7,&(lvalues[1913]),0},
-{"id-pda","id-pda",NID_id_pda,7,&(lvalues[1920]),0},
-{"id-aca","id-aca",NID_id_aca,7,&(lvalues[1927]),0},
-{"id-qcs","id-qcs",NID_id_qcs,7,&(lvalues[1934]),0},
-{"id-cct","id-cct",NID_id_cct,7,&(lvalues[1941]),0},
-{"id-pkix1-explicit-88","id-pkix1-explicit-88",
-	NID_id_pkix1_explicit_88,8,&(lvalues[1948]),0},
-{"id-pkix1-implicit-88","id-pkix1-implicit-88",
-	NID_id_pkix1_implicit_88,8,&(lvalues[1956]),0},
-{"id-pkix1-explicit-93","id-pkix1-explicit-93",
-	NID_id_pkix1_explicit_93,8,&(lvalues[1964]),0},
-{"id-pkix1-implicit-93","id-pkix1-implicit-93",
-	NID_id_pkix1_implicit_93,8,&(lvalues[1972]),0},
-{"id-mod-crmf","id-mod-crmf",NID_id_mod_crmf,8,&(lvalues[1980]),0},
-{"id-mod-cmc","id-mod-cmc",NID_id_mod_cmc,8,&(lvalues[1988]),0},
-{"id-mod-kea-profile-88","id-mod-kea-profile-88",
-	NID_id_mod_kea_profile_88,8,&(lvalues[1996]),0},
-{"id-mod-kea-profile-93","id-mod-kea-profile-93",
-	NID_id_mod_kea_profile_93,8,&(lvalues[2004]),0},
-{"id-mod-cmp","id-mod-cmp",NID_id_mod_cmp,8,&(lvalues[2012]),0},
-{"id-mod-qualified-cert-88","id-mod-qualified-cert-88",
-	NID_id_mod_qualified_cert_88,8,&(lvalues[2020]),0},
-{"id-mod-qualified-cert-93","id-mod-qualified-cert-93",
-	NID_id_mod_qualified_cert_93,8,&(lvalues[2028]),0},
-{"id-mod-attribute-cert","id-mod-attribute-cert",
-	NID_id_mod_attribute_cert,8,&(lvalues[2036]),0},
-{"id-mod-timestamp-protocol","id-mod-timestamp-protocol",
-	NID_id_mod_timestamp_protocol,8,&(lvalues[2044]),0},
-{"id-mod-ocsp","id-mod-ocsp",NID_id_mod_ocsp,8,&(lvalues[2052]),0},
-{"id-mod-dvcs","id-mod-dvcs",NID_id_mod_dvcs,8,&(lvalues[2060]),0},
-{"id-mod-cmp2000","id-mod-cmp2000",NID_id_mod_cmp2000,8,
-	&(lvalues[2068]),0},
-{"biometricInfo","Biometric Info",NID_biometricInfo,8,&(lvalues[2076]),0},
-{"qcStatements","qcStatements",NID_qcStatements,8,&(lvalues[2084]),0},
-{"ac-auditEntity","ac-auditEntity",NID_ac_auditEntity,8,
-	&(lvalues[2092]),0},
-{"ac-targeting","ac-targeting",NID_ac_targeting,8,&(lvalues[2100]),0},
-{"aaControls","aaControls",NID_aaControls,8,&(lvalues[2108]),0},
-{"sbgp-ipAddrBlock","sbgp-ipAddrBlock",NID_sbgp_ipAddrBlock,8,
-	&(lvalues[2116]),0},
-{"sbgp-autonomousSysNum","sbgp-autonomousSysNum",
-	NID_sbgp_autonomousSysNum,8,&(lvalues[2124]),0},
-{"sbgp-routerIdentifier","sbgp-routerIdentifier",
-	NID_sbgp_routerIdentifier,8,&(lvalues[2132]),0},
-{"textNotice","textNotice",NID_textNotice,8,&(lvalues[2140]),0},
-{"ipsecEndSystem","IPSec End System",NID_ipsecEndSystem,8,
-	&(lvalues[2148]),0},
-{"ipsecTunnel","IPSec Tunnel",NID_ipsecTunnel,8,&(lvalues[2156]),0},
-{"ipsecUser","IPSec User",NID_ipsecUser,8,&(lvalues[2164]),0},
-{"DVCS","dvcs",NID_dvcs,8,&(lvalues[2172]),0},
-{"id-it-caProtEncCert","id-it-caProtEncCert",NID_id_it_caProtEncCert,
-	8,&(lvalues[2180]),0},
-{"id-it-signKeyPairTypes","id-it-signKeyPairTypes",
-	NID_id_it_signKeyPairTypes,8,&(lvalues[2188]),0},
-{"id-it-encKeyPairTypes","id-it-encKeyPairTypes",
-	NID_id_it_encKeyPairTypes,8,&(lvalues[2196]),0},
-{"id-it-preferredSymmAlg","id-it-preferredSymmAlg",
-	NID_id_it_preferredSymmAlg,8,&(lvalues[2204]),0},
-{"id-it-caKeyUpdateInfo","id-it-caKeyUpdateInfo",
-	NID_id_it_caKeyUpdateInfo,8,&(lvalues[2212]),0},
-{"id-it-currentCRL","id-it-currentCRL",NID_id_it_currentCRL,8,
-	&(lvalues[2220]),0},
-{"id-it-unsupportedOIDs","id-it-unsupportedOIDs",
-	NID_id_it_unsupportedOIDs,8,&(lvalues[2228]),0},
-{"id-it-subscriptionRequest","id-it-subscriptionRequest",
-	NID_id_it_subscriptionRequest,8,&(lvalues[2236]),0},
-{"id-it-subscriptionResponse","id-it-subscriptionResponse",
-	NID_id_it_subscriptionResponse,8,&(lvalues[2244]),0},
-{"id-it-keyPairParamReq","id-it-keyPairParamReq",
-	NID_id_it_keyPairParamReq,8,&(lvalues[2252]),0},
-{"id-it-keyPairParamRep","id-it-keyPairParamRep",
-	NID_id_it_keyPairParamRep,8,&(lvalues[2260]),0},
-{"id-it-revPassphrase","id-it-revPassphrase",NID_id_it_revPassphrase,
-	8,&(lvalues[2268]),0},
-{"id-it-implicitConfirm","id-it-implicitConfirm",
-	NID_id_it_implicitConfirm,8,&(lvalues[2276]),0},
-{"id-it-confirmWaitTime","id-it-confirmWaitTime",
-	NID_id_it_confirmWaitTime,8,&(lvalues[2284]),0},
-{"id-it-origPKIMessage","id-it-origPKIMessage",
-	NID_id_it_origPKIMessage,8,&(lvalues[2292]),0},
-{"id-regCtrl","id-regCtrl",NID_id_regCtrl,8,&(lvalues[2300]),0},
-{"id-regInfo","id-regInfo",NID_id_regInfo,8,&(lvalues[2308]),0},
-{"id-regCtrl-regToken","id-regCtrl-regToken",NID_id_regCtrl_regToken,
-	9,&(lvalues[2316]),0},
-{"id-regCtrl-authenticator","id-regCtrl-authenticator",
-	NID_id_regCtrl_authenticator,9,&(lvalues[2325]),0},
-{"id-regCtrl-pkiPublicationInfo","id-regCtrl-pkiPublicationInfo",
-	NID_id_regCtrl_pkiPublicationInfo,9,&(lvalues[2334]),0},
-{"id-regCtrl-pkiArchiveOptions","id-regCtrl-pkiArchiveOptions",
-	NID_id_regCtrl_pkiArchiveOptions,9,&(lvalues[2343]),0},
-{"id-regCtrl-oldCertID","id-regCtrl-oldCertID",
-	NID_id_regCtrl_oldCertID,9,&(lvalues[2352]),0},
-{"id-regCtrl-protocolEncrKey","id-regCtrl-protocolEncrKey",
-	NID_id_regCtrl_protocolEncrKey,9,&(lvalues[2361]),0},
-{"id-regInfo-utf8Pairs","id-regInfo-utf8Pairs",
-	NID_id_regInfo_utf8Pairs,9,&(lvalues[2370]),0},
-{"id-regInfo-certReq","id-regInfo-certReq",NID_id_regInfo_certReq,9,
-	&(lvalues[2379]),0},
-{"id-alg-des40","id-alg-des40",NID_id_alg_des40,8,&(lvalues[2388]),0},
-{"id-alg-noSignature","id-alg-noSignature",NID_id_alg_noSignature,8,
-	&(lvalues[2396]),0},
-{"id-alg-dh-sig-hmac-sha1","id-alg-dh-sig-hmac-sha1",
-	NID_id_alg_dh_sig_hmac_sha1,8,&(lvalues[2404]),0},
-{"id-alg-dh-pop","id-alg-dh-pop",NID_id_alg_dh_pop,8,&(lvalues[2412]),0},
-{"id-cmc-statusInfo","id-cmc-statusInfo",NID_id_cmc_statusInfo,8,
-	&(lvalues[2420]),0},
-{"id-cmc-identification","id-cmc-identification",
-	NID_id_cmc_identification,8,&(lvalues[2428]),0},
-{"id-cmc-identityProof","id-cmc-identityProof",
-	NID_id_cmc_identityProof,8,&(lvalues[2436]),0},
-{"id-cmc-dataReturn","id-cmc-dataReturn",NID_id_cmc_dataReturn,8,
-	&(lvalues[2444]),0},
-{"id-cmc-transactionId","id-cmc-transactionId",
-	NID_id_cmc_transactionId,8,&(lvalues[2452]),0},
-{"id-cmc-senderNonce","id-cmc-senderNonce",NID_id_cmc_senderNonce,8,
-	&(lvalues[2460]),0},
-{"id-cmc-recipientNonce","id-cmc-recipientNonce",
-	NID_id_cmc_recipientNonce,8,&(lvalues[2468]),0},
-{"id-cmc-addExtensions","id-cmc-addExtensions",
-	NID_id_cmc_addExtensions,8,&(lvalues[2476]),0},
-{"id-cmc-encryptedPOP","id-cmc-encryptedPOP",NID_id_cmc_encryptedPOP,
-	8,&(lvalues[2484]),0},
-{"id-cmc-decryptedPOP","id-cmc-decryptedPOP",NID_id_cmc_decryptedPOP,
-	8,&(lvalues[2492]),0},
-{"id-cmc-lraPOPWitness","id-cmc-lraPOPWitness",
-	NID_id_cmc_lraPOPWitness,8,&(lvalues[2500]),0},
-{"id-cmc-getCert","id-cmc-getCert",NID_id_cmc_getCert,8,
-	&(lvalues[2508]),0},
-{"id-cmc-getCRL","id-cmc-getCRL",NID_id_cmc_getCRL,8,&(lvalues[2516]),0},
-{"id-cmc-revokeRequest","id-cmc-revokeRequest",
-	NID_id_cmc_revokeRequest,8,&(lvalues[2524]),0},
-{"id-cmc-regInfo","id-cmc-regInfo",NID_id_cmc_regInfo,8,
-	&(lvalues[2532]),0},
-{"id-cmc-responseInfo","id-cmc-responseInfo",NID_id_cmc_responseInfo,
-	8,&(lvalues[2540]),0},
-{"id-cmc-queryPending","id-cmc-queryPending",NID_id_cmc_queryPending,
-	8,&(lvalues[2548]),0},
-{"id-cmc-popLinkRandom","id-cmc-popLinkRandom",
-	NID_id_cmc_popLinkRandom,8,&(lvalues[2556]),0},
-{"id-cmc-popLinkWitness","id-cmc-popLinkWitness",
-	NID_id_cmc_popLinkWitness,8,&(lvalues[2564]),0},
-{"id-cmc-confirmCertAcceptance","id-cmc-confirmCertAcceptance",
-	NID_id_cmc_confirmCertAcceptance,8,&(lvalues[2572]),0},
-{"id-on-personalData","id-on-personalData",NID_id_on_personalData,8,
-	&(lvalues[2580]),0},
-{"id-pda-dateOfBirth","id-pda-dateOfBirth",NID_id_pda_dateOfBirth,8,
-	&(lvalues[2588]),0},
-{"id-pda-placeOfBirth","id-pda-placeOfBirth",NID_id_pda_placeOfBirth,
-	8,&(lvalues[2596]),0},
-{NULL,NULL,NID_undef,0,NULL,0},
-{"id-pda-gender","id-pda-gender",NID_id_pda_gender,8,&(lvalues[2604]),0},
-{"id-pda-countryOfCitizenship","id-pda-countryOfCitizenship",
-	NID_id_pda_countryOfCitizenship,8,&(lvalues[2612]),0},
-{"id-pda-countryOfResidence","id-pda-countryOfResidence",
-	NID_id_pda_countryOfResidence,8,&(lvalues[2620]),0},
-{"id-aca-authenticationInfo","id-aca-authenticationInfo",
-	NID_id_aca_authenticationInfo,8,&(lvalues[2628]),0},
-{"id-aca-accessIdentity","id-aca-accessIdentity",
-	NID_id_aca_accessIdentity,8,&(lvalues[2636]),0},
-{"id-aca-chargingIdentity","id-aca-chargingIdentity",
-	NID_id_aca_chargingIdentity,8,&(lvalues[2644]),0},
-{"id-aca-group","id-aca-group",NID_id_aca_group,8,&(lvalues[2652]),0},
-{"id-aca-role","id-aca-role",NID_id_aca_role,8,&(lvalues[2660]),0},
-{"id-qcs-pkixQCSyntax-v1","id-qcs-pkixQCSyntax-v1",
-	NID_id_qcs_pkixQCSyntax_v1,8,&(lvalues[2668]),0},
-{"id-cct-crs","id-cct-crs",NID_id_cct_crs,8,&(lvalues[2676]),0},
-{"id-cct-PKIData","id-cct-PKIData",NID_id_cct_PKIData,8,
-	&(lvalues[2684]),0},
-{"id-cct-PKIResponse","id-cct-PKIResponse",NID_id_cct_PKIResponse,8,
-	&(lvalues[2692]),0},
-{"ad_timestamping","AD Time Stamping",NID_ad_timeStamping,8,
-	&(lvalues[2700]),0},
-{"AD_DVCS","ad dvcs",NID_ad_dvcs,8,&(lvalues[2708]),0},
-{"basicOCSPResponse","Basic OCSP Response",NID_id_pkix_OCSP_basic,9,
-	&(lvalues[2716]),0},
-{"Nonce","OCSP Nonce",NID_id_pkix_OCSP_Nonce,9,&(lvalues[2725]),0},
-{"CrlID","OCSP CRL ID",NID_id_pkix_OCSP_CrlID,9,&(lvalues[2734]),0},
-{"acceptableResponses","Acceptable OCSP Responses",
-	NID_id_pkix_OCSP_acceptableResponses,9,&(lvalues[2743]),0},
-{"noCheck","OCSP No Check",NID_id_pkix_OCSP_noCheck,9,&(lvalues[2752]),0},
-{"archiveCutoff","OCSP Archive Cutoff",NID_id_pkix_OCSP_archiveCutoff,
-	9,&(lvalues[2761]),0},
-{"serviceLocator","OCSP Service Locator",
-	NID_id_pkix_OCSP_serviceLocator,9,&(lvalues[2770]),0},
-{"extendedStatus","Extended OCSP Status",
-	NID_id_pkix_OCSP_extendedStatus,9,&(lvalues[2779]),0},
-{"valid","valid",NID_id_pkix_OCSP_valid,9,&(lvalues[2788]),0},
-{"path","path",NID_id_pkix_OCSP_path,9,&(lvalues[2797]),0},
-{"trustRoot","Trust Root",NID_id_pkix_OCSP_trustRoot,9,
-	&(lvalues[2806]),0},
-{"algorithm","algorithm",NID_algorithm,4,&(lvalues[2815]),0},
-{"rsaSignature","rsaSignature",NID_rsaSignature,5,&(lvalues[2819]),0},
-{"X500algorithms","directory services - algorithms",
-	NID_X500algorithms,2,&(lvalues[2824]),0},
-{"ORG","org",NID_org,1,&(lvalues[2826]),0},
-{"DOD","dod",NID_dod,2,&(lvalues[2827]),0},
-{"IANA","iana",NID_iana,3,&(lvalues[2829]),0},
-{"directory","Directory",NID_Directory,4,&(lvalues[2832]),0},
-{"mgmt","Management",NID_Management,4,&(lvalues[2836]),0},
-{"experimental","Experimental",NID_Experimental,4,&(lvalues[2840]),0},
-{"private","Private",NID_Private,4,&(lvalues[2844]),0},
-{"security","Security",NID_Security,4,&(lvalues[2848]),0},
-{"snmpv2","SNMPv2",NID_SNMPv2,4,&(lvalues[2852]),0},
-{"Mail","Mail",NID_Mail,4,&(lvalues[2856]),0},
-{"enterprises","Enterprises",NID_Enterprises,5,&(lvalues[2860]),0},
-{"dcobject","dcObject",NID_dcObject,9,&(lvalues[2865]),0},
-{"DC","domainComponent",NID_domainComponent,10,&(lvalues[2874]),0},
-{"domain","Domain",NID_Domain,10,&(lvalues[2884]),0},
-{"NULL","NULL",NID_joint_iso_ccitt,1,&(lvalues[2894]),0},
-{"selected-attribute-types","Selected Attribute Types",
-	NID_selected_attribute_types,3,&(lvalues[2895]),0},
-{"clearance","clearance",NID_clearance,4,&(lvalues[2898]),0},
-{"RSA-MD4","md4WithRSAEncryption",NID_md4WithRSAEncryption,9,
-	&(lvalues[2902]),0},
-{"ac-proxying","ac-proxying",NID_ac_proxying,8,&(lvalues[2911]),0},
-{"subjectInfoAccess","Subject Information Access",NID_sinfo_access,8,
-	&(lvalues[2919]),0},
-{"id-aca-encAttrs","id-aca-encAttrs",NID_id_aca_encAttrs,8,
-	&(lvalues[2927]),0},
-{"role","role",NID_role,3,&(lvalues[2935]),0},
-{"policyConstraints","X509v3 Policy Constraints",
-	NID_policy_constraints,3,&(lvalues[2938]),0},
-{"targetInformation","X509v3 AC Targeting",NID_target_information,3,
-	&(lvalues[2941]),0},
-{"noRevAvail","X509v3 No Revocation Available",NID_no_rev_avail,3,
-	&(lvalues[2944]),0},
-{"NULL","NULL",NID_ccitt,1,&(lvalues[2947]),0},
-{"ansi-X9-62","ANSI X9.62",NID_ansi_X9_62,5,&(lvalues[2948]),0},
-{"prime-field","prime-field",NID_X9_62_prime_field,7,&(lvalues[2953]),0},
-{"characteristic-two-field","characteristic-two-field",
-	NID_X9_62_characteristic_two_field,7,&(lvalues[2960]),0},
-{"id-ecPublicKey","id-ecPublicKey",NID_X9_62_id_ecPublicKey,7,
-	&(lvalues[2967]),0},
-{"prime192v1","prime192v1",NID_X9_62_prime192v1,8,&(lvalues[2974]),0},
-{"prime192v2","prime192v2",NID_X9_62_prime192v2,8,&(lvalues[2982]),0},
-{"prime192v3","prime192v3",NID_X9_62_prime192v3,8,&(lvalues[2990]),0},
-{"prime239v1","prime239v1",NID_X9_62_prime239v1,8,&(lvalues[2998]),0},
-{"prime239v2","prime239v2",NID_X9_62_prime239v2,8,&(lvalues[3006]),0},
-{"prime239v3","prime239v3",NID_X9_62_prime239v3,8,&(lvalues[3014]),0},
-{"prime256v1","prime256v1",NID_X9_62_prime256v1,8,&(lvalues[3022]),0},
-{"ecdsa-with-SHA1","ecdsa-with-SHA1",NID_ecdsa_with_SHA1,7,
-	&(lvalues[3030]),0},
-{"CSPName","Microsoft CSP Name",NID_ms_csp_name,9,&(lvalues[3037]),0},
-{"AES-128-ECB","aes-128-ecb",NID_aes_128_ecb,9,&(lvalues[3046]),0},
-{"AES-128-CBC","aes-128-cbc",NID_aes_128_cbc,9,&(lvalues[3055]),0},
-{"AES-128-OFB","aes-128-ofb",NID_aes_128_ofb128,9,&(lvalues[3064]),0},
-{"AES-128-CFB","aes-128-cfb",NID_aes_128_cfb128,9,&(lvalues[3073]),0},
-{"AES-192-ECB","aes-192-ecb",NID_aes_192_ecb,9,&(lvalues[3082]),0},
-{"AES-192-CBC","aes-192-cbc",NID_aes_192_cbc,9,&(lvalues[3091]),0},
-{"AES-192-OFB","aes-192-ofb",NID_aes_192_ofb128,9,&(lvalues[3100]),0},
-{"AES-192-CFB","aes-192-cfb",NID_aes_192_cfb128,9,&(lvalues[3109]),0},
-{"AES-256-ECB","aes-256-ecb",NID_aes_256_ecb,9,&(lvalues[3118]),0},
-{"AES-256-CBC","aes-256-cbc",NID_aes_256_cbc,9,&(lvalues[3127]),0},
-{"AES-256-OFB","aes-256-ofb",NID_aes_256_ofb128,9,&(lvalues[3136]),0},
-{"AES-256-CFB","aes-256-cfb",NID_aes_256_cfb128,9,&(lvalues[3145]),0},
-{"holdInstructionCode","Hold Instruction Code",
-	NID_hold_instruction_code,3,&(lvalues[3154]),0},
-{"holdInstructionNone","Hold Instruction None",
-	NID_hold_instruction_none,7,&(lvalues[3157]),0},
-{"holdInstructionCallIssuer","Hold Instruction Call Issuer",
-	NID_hold_instruction_call_issuer,7,&(lvalues[3164]),0},
-{"holdInstructionReject","Hold Instruction Reject",
-	NID_hold_instruction_reject,7,&(lvalues[3171]),0},
-{"data","data",NID_data,1,&(lvalues[3178]),0},
-{"pss","pss",NID_pss,3,&(lvalues[3179]),0},
-{"ucl","ucl",NID_ucl,7,&(lvalues[3182]),0},
-{"pilot","pilot",NID_pilot,8,&(lvalues[3189]),0},
-{"pilotAttributeType","pilotAttributeType",NID_pilotAttributeType,9,
-	&(lvalues[3197]),0},
-{"pilotAttributeSyntax","pilotAttributeSyntax",
-	NID_pilotAttributeSyntax,9,&(lvalues[3206]),0},
-{"pilotObjectClass","pilotObjectClass",NID_pilotObjectClass,9,
-	&(lvalues[3215]),0},
-{"pilotGroups","pilotGroups",NID_pilotGroups,9,&(lvalues[3224]),0},
-{"iA5StringSyntax","iA5StringSyntax",NID_iA5StringSyntax,10,
-	&(lvalues[3233]),0},
-{"caseIgnoreIA5StringSyntax","caseIgnoreIA5StringSyntax",
-	NID_caseIgnoreIA5StringSyntax,10,&(lvalues[3243]),0},
-{"pilotObject","pilotObject",NID_pilotObject,10,&(lvalues[3253]),0},
-{"pilotPerson","pilotPerson",NID_pilotPerson,10,&(lvalues[3263]),0},
-{"account","account",NID_account,10,&(lvalues[3273]),0},
-{"document","document",NID_document,10,&(lvalues[3283]),0},
-{"room","room",NID_room,10,&(lvalues[3293]),0},
-{"documentSeries","documentSeries",NID_documentSeries,10,
-	&(lvalues[3303]),0},
-{"rFC822localPart","rFC822localPart",NID_rFC822localPart,10,
-	&(lvalues[3313]),0},
-{"dNSDomain","dNSDomain",NID_dNSDomain,10,&(lvalues[3323]),0},
-{"domainRelatedObject","domainRelatedObject",NID_domainRelatedObject,
-	10,&(lvalues[3333]),0},
-{"friendlyCountry","friendlyCountry",NID_friendlyCountry,10,
-	&(lvalues[3343]),0},
-{"simpleSecurityObject","simpleSecurityObject",
-	NID_simpleSecurityObject,10,&(lvalues[3353]),0},
-{"pilotOrganization","pilotOrganization",NID_pilotOrganization,10,
-	&(lvalues[3363]),0},
-{"pilotDSA","pilotDSA",NID_pilotDSA,10,&(lvalues[3373]),0},
-{"qualityLabelledData","qualityLabelledData",NID_qualityLabelledData,
-	10,&(lvalues[3383]),0},
-{"UID","userId",NID_userId,10,&(lvalues[3393]),0},
-{"textEncodedORAddress","textEncodedORAddress",
-	NID_textEncodedORAddress,10,&(lvalues[3403]),0},
-{"mail","rfc822Mailbox",NID_rfc822Mailbox,10,&(lvalues[3413]),0},
-{"info","info",NID_info,10,&(lvalues[3423]),0},
-{"favouriteDrink","favouriteDrink",NID_favouriteDrink,10,
-	&(lvalues[3433]),0},
-{"roomNumber","roomNumber",NID_roomNumber,10,&(lvalues[3443]),0},
-{"photo","photo",NID_photo,10,&(lvalues[3453]),0},
-{"userClass","userClass",NID_userClass,10,&(lvalues[3463]),0},
-{"host","host",NID_host,10,&(lvalues[3473]),0},
-{"manager","manager",NID_manager,10,&(lvalues[3483]),0},
-{"documentIdentifier","documentIdentifier",NID_documentIdentifier,10,
-	&(lvalues[3493]),0},
-{"documentTitle","documentTitle",NID_documentTitle,10,&(lvalues[3503]),0},
-{"documentVersion","documentVersion",NID_documentVersion,10,
-	&(lvalues[3513]),0},
-{"documentAuthor","documentAuthor",NID_documentAuthor,10,
-	&(lvalues[3523]),0},
-{"documentLocation","documentLocation",NID_documentLocation,10,
-	&(lvalues[3533]),0},
-{"homeTelephoneNumber","homeTelephoneNumber",NID_homeTelephoneNumber,
-	10,&(lvalues[3543]),0},
-{"secretary","secretary",NID_secretary,10,&(lvalues[3553]),0},
-{"otherMailbox","otherMailbox",NID_otherMailbox,10,&(lvalues[3563]),0},
-{"lastModifiedTime","lastModifiedTime",NID_lastModifiedTime,10,
-	&(lvalues[3573]),0},
-{"lastModifiedBy","lastModifiedBy",NID_lastModifiedBy,10,
-	&(lvalues[3583]),0},
-{"aRecord","aRecord",NID_aRecord,10,&(lvalues[3593]),0},
-{"pilotAttributeType27","pilotAttributeType27",
-	NID_pilotAttributeType27,10,&(lvalues[3603]),0},
-{"mXRecord","mXRecord",NID_mXRecord,10,&(lvalues[3613]),0},
-{"nSRecord","nSRecord",NID_nSRecord,10,&(lvalues[3623]),0},
-{"sOARecord","sOARecord",NID_sOARecord,10,&(lvalues[3633]),0},
-{"cNAMERecord","cNAMERecord",NID_cNAMERecord,10,&(lvalues[3643]),0},
-{"associatedDomain","associatedDomain",NID_associatedDomain,10,
-	&(lvalues[3653]),0},
-{"associatedName","associatedName",NID_associatedName,10,
-	&(lvalues[3663]),0},
-{"homePostalAddress","homePostalAddress",NID_homePostalAddress,10,
-	&(lvalues[3673]),0},
-{"personalTitle","personalTitle",NID_personalTitle,10,&(lvalues[3683]),0},
-{"mobileTelephoneNumber","mobileTelephoneNumber",
-	NID_mobileTelephoneNumber,10,&(lvalues[3693]),0},
-{"pagerTelephoneNumber","pagerTelephoneNumber",
-	NID_pagerTelephoneNumber,10,&(lvalues[3703]),0},
-{"friendlyCountryName","friendlyCountryName",NID_friendlyCountryName,
-	10,&(lvalues[3713]),0},
-{"organizationalStatus","organizationalStatus",
-	NID_organizationalStatus,10,&(lvalues[3723]),0},
-{"janetMailbox","janetMailbox",NID_janetMailbox,10,&(lvalues[3733]),0},
-{"mailPreferenceOption","mailPreferenceOption",
-	NID_mailPreferenceOption,10,&(lvalues[3743]),0},
-{"buildingName","buildingName",NID_buildingName,10,&(lvalues[3753]),0},
-{"dSAQuality","dSAQuality",NID_dSAQuality,10,&(lvalues[3763]),0},
-{"singleLevelQuality","singleLevelQuality",NID_singleLevelQuality,10,
-	&(lvalues[3773]),0},
-{"subtreeMinimumQuality","subtreeMinimumQuality",
-	NID_subtreeMinimumQuality,10,&(lvalues[3783]),0},
-{"subtreeMaximumQuality","subtreeMaximumQuality",
-	NID_subtreeMaximumQuality,10,&(lvalues[3793]),0},
-{"personalSignature","personalSignature",NID_personalSignature,10,
-	&(lvalues[3803]),0},
-{"dITRedirect","dITRedirect",NID_dITRedirect,10,&(lvalues[3813]),0},
-{"audio","audio",NID_audio,10,&(lvalues[3823]),0},
-{"documentPublisher","documentPublisher",NID_documentPublisher,10,
-	&(lvalues[3833]),0},
-{"x500UniqueIdentifier","x500UniqueIdentifier",
-	NID_x500UniqueIdentifier,3,&(lvalues[3843]),0},
-{"mime-mhs","MIME MHS",NID_mime_mhs,5,&(lvalues[3846]),0},
-{"mime-mhs-headings","mime-mhs-headings",NID_mime_mhs_headings,6,
-	&(lvalues[3851]),0},
-{"mime-mhs-bodies","mime-mhs-bodies",NID_mime_mhs_bodies,6,
-	&(lvalues[3857]),0},
-{"id-hex-partial-message","id-hex-partial-message",
-	NID_id_hex_partial_message,7,&(lvalues[3863]),0},
-{"id-hex-multipart-message","id-hex-multipart-message",
-	NID_id_hex_multipart_message,7,&(lvalues[3870]),0},
-{"generationQualifier","generationQualifier",NID_generationQualifier,
-	3,&(lvalues[3877]),0},
-{"pseudonym","pseudonym",NID_pseudonym,3,&(lvalues[3880]),0},
-{NULL,NULL,NID_undef,0,NULL,0},
-{"id-set","Secure Electronic Transactions",NID_id_set,2,
-	&(lvalues[3883]),0},
-{"set-ctype","content types",NID_set_ctype,3,&(lvalues[3885]),0},
-{"set-msgExt","message extensions",NID_set_msgExt,3,&(lvalues[3888]),0},
-{"set-attr","set-attr",NID_set_attr,3,&(lvalues[3891]),0},
-{"set-policy","set-policy",NID_set_policy,3,&(lvalues[3894]),0},
-{"set-certExt","certificate extensions",NID_set_certExt,3,
-	&(lvalues[3897]),0},
-{"set-brand","set-brand",NID_set_brand,3,&(lvalues[3900]),0},
-{"setct-PANData","setct-PANData",NID_setct_PANData,4,&(lvalues[3903]),0},
-{"setct-PANToken","setct-PANToken",NID_setct_PANToken,4,
-	&(lvalues[3907]),0},
-{"setct-PANOnly","setct-PANOnly",NID_setct_PANOnly,4,&(lvalues[3911]),0},
-{"setct-OIData","setct-OIData",NID_setct_OIData,4,&(lvalues[3915]),0},
-{"setct-PI","setct-PI",NID_setct_PI,4,&(lvalues[3919]),0},
-{"setct-PIData","setct-PIData",NID_setct_PIData,4,&(lvalues[3923]),0},
-{"setct-PIDataUnsigned","setct-PIDataUnsigned",
-	NID_setct_PIDataUnsigned,4,&(lvalues[3927]),0},
-{"setct-HODInput","setct-HODInput",NID_setct_HODInput,4,
-	&(lvalues[3931]),0},
-{"setct-AuthResBaggage","setct-AuthResBaggage",
-	NID_setct_AuthResBaggage,4,&(lvalues[3935]),0},
-{"setct-AuthRevReqBaggage","setct-AuthRevReqBaggage",
-	NID_setct_AuthRevReqBaggage,4,&(lvalues[3939]),0},
-{"setct-AuthRevResBaggage","setct-AuthRevResBaggage",
-	NID_setct_AuthRevResBaggage,4,&(lvalues[3943]),0},
-{"setct-CapTokenSeq","setct-CapTokenSeq",NID_setct_CapTokenSeq,4,
-	&(lvalues[3947]),0},
-{"setct-PInitResData","setct-PInitResData",NID_setct_PInitResData,4,
-	&(lvalues[3951]),0},
-{"setct-PI-TBS","setct-PI-TBS",NID_setct_PI_TBS,4,&(lvalues[3955]),0},
-{"setct-PResData","setct-PResData",NID_setct_PResData,4,
-	&(lvalues[3959]),0},
-{"setct-AuthReqTBS","setct-AuthReqTBS",NID_setct_AuthReqTBS,4,
-	&(lvalues[3963]),0},
-{"setct-AuthResTBS","setct-AuthResTBS",NID_setct_AuthResTBS,4,
-	&(lvalues[3967]),0},
-{"setct-AuthResTBSX","setct-AuthResTBSX",NID_setct_AuthResTBSX,4,
-	&(lvalues[3971]),0},
-{"setct-AuthTokenTBS","setct-AuthTokenTBS",NID_setct_AuthTokenTBS,4,
-	&(lvalues[3975]),0},
-{"setct-CapTokenData","setct-CapTokenData",NID_setct_CapTokenData,4,
-	&(lvalues[3979]),0},
-{"setct-CapTokenTBS","setct-CapTokenTBS",NID_setct_CapTokenTBS,4,
-	&(lvalues[3983]),0},
-{"setct-AcqCardCodeMsg","setct-AcqCardCodeMsg",
-	NID_setct_AcqCardCodeMsg,4,&(lvalues[3987]),0},
-{"setct-AuthRevReqTBS","setct-AuthRevReqTBS",NID_setct_AuthRevReqTBS,
-	4,&(lvalues[3991]),0},
-{"setct-AuthRevResData","setct-AuthRevResData",
-	NID_setct_AuthRevResData,4,&(lvalues[3995]),0},
-{"setct-AuthRevResTBS","setct-AuthRevResTBS",NID_setct_AuthRevResTBS,
-	4,&(lvalues[3999]),0},
-{"setct-CapReqTBS","setct-CapReqTBS",NID_setct_CapReqTBS,4,
-	&(lvalues[4003]),0},
-{"setct-CapReqTBSX","setct-CapReqTBSX",NID_setct_CapReqTBSX,4,
-	&(lvalues[4007]),0},
-{"setct-CapResData","setct-CapResData",NID_setct_CapResData,4,
-	&(lvalues[4011]),0},
-{"setct-CapRevReqTBS","setct-CapRevReqTBS",NID_setct_CapRevReqTBS,4,
-	&(lvalues[4015]),0},
-{"setct-CapRevReqTBSX","setct-CapRevReqTBSX",NID_setct_CapRevReqTBSX,
-	4,&(lvalues[4019]),0},
-{"setct-CapRevResData","setct-CapRevResData",NID_setct_CapRevResData,
-	4,&(lvalues[4023]),0},
-{"setct-CredReqTBS","setct-CredReqTBS",NID_setct_CredReqTBS,4,
-	&(lvalues[4027]),0},
-{"setct-CredReqTBSX","setct-CredReqTBSX",NID_setct_CredReqTBSX,4,
-	&(lvalues[4031]),0},
-{"setct-CredResData","setct-CredResData",NID_setct_CredResData,4,
-	&(lvalues[4035]),0},
-{"setct-CredRevReqTBS","setct-CredRevReqTBS",NID_setct_CredRevReqTBS,
-	4,&(lvalues[4039]),0},
-{"setct-CredRevReqTBSX","setct-CredRevReqTBSX",
-	NID_setct_CredRevReqTBSX,4,&(lvalues[4043]),0},
-{"setct-CredRevResData","setct-CredRevResData",
-	NID_setct_CredRevResData,4,&(lvalues[4047]),0},
-{"setct-PCertReqData","setct-PCertReqData",NID_setct_PCertReqData,4,
-	&(lvalues[4051]),0},
-{"setct-PCertResTBS","setct-PCertResTBS",NID_setct_PCertResTBS,4,
-	&(lvalues[4055]),0},
-{"setct-BatchAdminReqData","setct-BatchAdminReqData",
-	NID_setct_BatchAdminReqData,4,&(lvalues[4059]),0},
-{"setct-BatchAdminResData","setct-BatchAdminResData",
-	NID_setct_BatchAdminResData,4,&(lvalues[4063]),0},
-{"setct-CardCInitResTBS","setct-CardCInitResTBS",
-	NID_setct_CardCInitResTBS,4,&(lvalues[4067]),0},
-{"setct-MeAqCInitResTBS","setct-MeAqCInitResTBS",
-	NID_setct_MeAqCInitResTBS,4,&(lvalues[4071]),0},
-{"setct-RegFormResTBS","setct-RegFormResTBS",NID_setct_RegFormResTBS,
-	4,&(lvalues[4075]),0},
-{"setct-CertReqData","setct-CertReqData",NID_setct_CertReqData,4,
-	&(lvalues[4079]),0},
-{"setct-CertReqTBS","setct-CertReqTBS",NID_setct_CertReqTBS,4,
-	&(lvalues[4083]),0},
-{"setct-CertResData","setct-CertResData",NID_setct_CertResData,4,
-	&(lvalues[4087]),0},
-{"setct-CertInqReqTBS","setct-CertInqReqTBS",NID_setct_CertInqReqTBS,
-	4,&(lvalues[4091]),0},
-{"setct-ErrorTBS","setct-ErrorTBS",NID_setct_ErrorTBS,4,
-	&(lvalues[4095]),0},
-{"setct-PIDualSignedTBE","setct-PIDualSignedTBE",
-	NID_setct_PIDualSignedTBE,4,&(lvalues[4099]),0},
-{"setct-PIUnsignedTBE","setct-PIUnsignedTBE",NID_setct_PIUnsignedTBE,
-	4,&(lvalues[4103]),0},
-{"setct-AuthReqTBE","setct-AuthReqTBE",NID_setct_AuthReqTBE,4,
-	&(lvalues[4107]),0},
-{"setct-AuthResTBE","setct-AuthResTBE",NID_setct_AuthResTBE,4,
-	&(lvalues[4111]),0},
-{"setct-AuthResTBEX","setct-AuthResTBEX",NID_setct_AuthResTBEX,4,
-	&(lvalues[4115]),0},
-{"setct-AuthTokenTBE","setct-AuthTokenTBE",NID_setct_AuthTokenTBE,4,
-	&(lvalues[4119]),0},
-{"setct-CapTokenTBE","setct-CapTokenTBE",NID_setct_CapTokenTBE,4,
-	&(lvalues[4123]),0},
-{"setct-CapTokenTBEX","setct-CapTokenTBEX",NID_setct_CapTokenTBEX,4,
-	&(lvalues[4127]),0},
-{"setct-AcqCardCodeMsgTBE","setct-AcqCardCodeMsgTBE",
-	NID_setct_AcqCardCodeMsgTBE,4,&(lvalues[4131]),0},
-{"setct-AuthRevReqTBE","setct-AuthRevReqTBE",NID_setct_AuthRevReqTBE,
-	4,&(lvalues[4135]),0},
-{"setct-AuthRevResTBE","setct-AuthRevResTBE",NID_setct_AuthRevResTBE,
-	4,&(lvalues[4139]),0},
-{"setct-AuthRevResTBEB","setct-AuthRevResTBEB",
-	NID_setct_AuthRevResTBEB,4,&(lvalues[4143]),0},
-{"setct-CapReqTBE","setct-CapReqTBE",NID_setct_CapReqTBE,4,
-	&(lvalues[4147]),0},
-{"setct-CapReqTBEX","setct-CapReqTBEX",NID_setct_CapReqTBEX,4,
-	&(lvalues[4151]),0},
-{"setct-CapResTBE","setct-CapResTBE",NID_setct_CapResTBE,4,
-	&(lvalues[4155]),0},
-{"setct-CapRevReqTBE","setct-CapRevReqTBE",NID_setct_CapRevReqTBE,4,
-	&(lvalues[4159]),0},
-{"setct-CapRevReqTBEX","setct-CapRevReqTBEX",NID_setct_CapRevReqTBEX,
-	4,&(lvalues[4163]),0},
-{"setct-CapRevResTBE","setct-CapRevResTBE",NID_setct_CapRevResTBE,4,
-	&(lvalues[4167]),0},
-{"setct-CredReqTBE","setct-CredReqTBE",NID_setct_CredReqTBE,4,
-	&(lvalues[4171]),0},
-{"setct-CredReqTBEX","setct-CredReqTBEX",NID_setct_CredReqTBEX,4,
-	&(lvalues[4175]),0},
-{"setct-CredResTBE","setct-CredResTBE",NID_setct_CredResTBE,4,
-	&(lvalues[4179]),0},
-{"setct-CredRevReqTBE","setct-CredRevReqTBE",NID_setct_CredRevReqTBE,
-	4,&(lvalues[4183]),0},
-{"setct-CredRevReqTBEX","setct-CredRevReqTBEX",
-	NID_setct_CredRevReqTBEX,4,&(lvalues[4187]),0},
-{"setct-CredRevResTBE","setct-CredRevResTBE",NID_setct_CredRevResTBE,
-	4,&(lvalues[4191]),0},
-{"setct-BatchAdminReqTBE","setct-BatchAdminReqTBE",
-	NID_setct_BatchAdminReqTBE,4,&(lvalues[4195]),0},
-{"setct-BatchAdminResTBE","setct-BatchAdminResTBE",
-	NID_setct_BatchAdminResTBE,4,&(lvalues[4199]),0},
-{"setct-RegFormReqTBE","setct-RegFormReqTBE",NID_setct_RegFormReqTBE,
-	4,&(lvalues[4203]),0},
-{"setct-CertReqTBE","setct-CertReqTBE",NID_setct_CertReqTBE,4,
-	&(lvalues[4207]),0},
-{"setct-CertReqTBEX","setct-CertReqTBEX",NID_setct_CertReqTBEX,4,
-	&(lvalues[4211]),0},
-{"setct-CertResTBE","setct-CertResTBE",NID_setct_CertResTBE,4,
-	&(lvalues[4215]),0},
-{"setct-CRLNotificationTBS","setct-CRLNotificationTBS",
-	NID_setct_CRLNotificationTBS,4,&(lvalues[4219]),0},
-{"setct-CRLNotificationResTBS","setct-CRLNotificationResTBS",
-	NID_setct_CRLNotificationResTBS,4,&(lvalues[4223]),0},
-{"setct-BCIDistributionTBS","setct-BCIDistributionTBS",
-	NID_setct_BCIDistributionTBS,4,&(lvalues[4227]),0},
-{"setext-genCrypt","generic cryptogram",NID_setext_genCrypt,4,
-	&(lvalues[4231]),0},
-{"setext-miAuth","merchant initiated auth",NID_setext_miAuth,4,
-	&(lvalues[4235]),0},
-{"setext-pinSecure","setext-pinSecure",NID_setext_pinSecure,4,
-	&(lvalues[4239]),0},
-{"setext-pinAny","setext-pinAny",NID_setext_pinAny,4,&(lvalues[4243]),0},
-{"setext-track2","setext-track2",NID_setext_track2,4,&(lvalues[4247]),0},
-{"setext-cv","additional verification",NID_setext_cv,4,
-	&(lvalues[4251]),0},
-{"set-policy-root","set-policy-root",NID_set_policy_root,4,
-	&(lvalues[4255]),0},
-{"setCext-hashedRoot","setCext-hashedRoot",NID_setCext_hashedRoot,4,
-	&(lvalues[4259]),0},
-{"setCext-certType","setCext-certType",NID_setCext_certType,4,
-	&(lvalues[4263]),0},
-{"setCext-merchData","setCext-merchData",NID_setCext_merchData,4,
-	&(lvalues[4267]),0},
-{"setCext-cCertRequired","setCext-cCertRequired",
-	NID_setCext_cCertRequired,4,&(lvalues[4271]),0},
-{"setCext-tunneling","setCext-tunneling",NID_setCext_tunneling,4,
-	&(lvalues[4275]),0},
-{"setCext-setExt","setCext-setExt",NID_setCext_setExt,4,
-	&(lvalues[4279]),0},
-{"setCext-setQualf","setCext-setQualf",NID_setCext_setQualf,4,
-	&(lvalues[4283]),0},
-{"setCext-PGWYcapabilities","setCext-PGWYcapabilities",
-	NID_setCext_PGWYcapabilities,4,&(lvalues[4287]),0},
-{"setCext-TokenIdentifier","setCext-TokenIdentifier",
-	NID_setCext_TokenIdentifier,4,&(lvalues[4291]),0},
-{"setCext-Track2Data","setCext-Track2Data",NID_setCext_Track2Data,4,
-	&(lvalues[4295]),0},
-{"setCext-TokenType","setCext-TokenType",NID_setCext_TokenType,4,
-	&(lvalues[4299]),0},
-{"setCext-IssuerCapabilities","setCext-IssuerCapabilities",
-	NID_setCext_IssuerCapabilities,4,&(lvalues[4303]),0},
-{"setAttr-Cert","setAttr-Cert",NID_setAttr_Cert,4,&(lvalues[4307]),0},
-{"setAttr-PGWYcap","payment gateway capabilities",NID_setAttr_PGWYcap,
-	4,&(lvalues[4311]),0},
-{"setAttr-TokenType","setAttr-TokenType",NID_setAttr_TokenType,4,
-	&(lvalues[4315]),0},
-{"setAttr-IssCap","issuer capabilities",NID_setAttr_IssCap,4,
-	&(lvalues[4319]),0},
-{"set-rootKeyThumb","set-rootKeyThumb",NID_set_rootKeyThumb,5,
-	&(lvalues[4323]),0},
-{"set-addPolicy","set-addPolicy",NID_set_addPolicy,5,&(lvalues[4328]),0},
-{"setAttr-Token-EMV","setAttr-Token-EMV",NID_setAttr_Token_EMV,5,
-	&(lvalues[4333]),0},
-{"setAttr-Token-B0Prime","setAttr-Token-B0Prime",
-	NID_setAttr_Token_B0Prime,5,&(lvalues[4338]),0},
-{"setAttr-IssCap-CVM","setAttr-IssCap-CVM",NID_setAttr_IssCap_CVM,5,
-	&(lvalues[4343]),0},
-{"setAttr-IssCap-T2","setAttr-IssCap-T2",NID_setAttr_IssCap_T2,5,
-	&(lvalues[4348]),0},
-{"setAttr-IssCap-Sig","setAttr-IssCap-Sig",NID_setAttr_IssCap_Sig,5,
-	&(lvalues[4353]),0},
-{"setAttr-GenCryptgrm","generate cryptogram",NID_setAttr_GenCryptgrm,
-	6,&(lvalues[4358]),0},
-{"setAttr-T2Enc","encrypted track 2",NID_setAttr_T2Enc,6,
-	&(lvalues[4364]),0},
-{"setAttr-T2cleartxt","cleartext track 2",NID_setAttr_T2cleartxt,6,
-	&(lvalues[4370]),0},
-{"setAttr-TokICCsig","ICC or token signature",NID_setAttr_TokICCsig,6,
-	&(lvalues[4376]),0},
-{"setAttr-SecDevSig","secure device signature",NID_setAttr_SecDevSig,
-	6,&(lvalues[4382]),0},
-{"set-brand-IATA-ATA","set-brand-IATA-ATA",NID_set_brand_IATA_ATA,4,
-	&(lvalues[4388]),0},
-{"set-brand-Diners","set-brand-Diners",NID_set_brand_Diners,4,
-	&(lvalues[4392]),0},
-{"set-brand-AmericanExpress","set-brand-AmericanExpress",
-	NID_set_brand_AmericanExpress,4,&(lvalues[4396]),0},
-{"set-brand-JCB","set-brand-JCB",NID_set_brand_JCB,4,&(lvalues[4400]),0},
-{"set-brand-Visa","set-brand-Visa",NID_set_brand_Visa,4,
-	&(lvalues[4404]),0},
-{"set-brand-MasterCard","set-brand-MasterCard",
-	NID_set_brand_MasterCard,4,&(lvalues[4408]),0},
-{"set-brand-Novus","set-brand-Novus",NID_set_brand_Novus,5,
-	&(lvalues[4412]),0},
-{"DES-CDMF","des-cdmf",NID_des_cdmf,8,&(lvalues[4417]),0},
-{"rsaOAEPEncryptionSET","rsaOAEPEncryptionSET",
-	NID_rsaOAEPEncryptionSET,9,&(lvalues[4425]),0},
-{"ITU-T","itu-t",NID_itu_t,1,&(lvalues[4434]),0},
-{"JOINT-ISO-ITU-T","joint-iso-itu-t",NID_joint_iso_itu_t,1,
-	&(lvalues[4435]),0},
-{"international-organizations","International Organizations",
-	NID_international_organizations,1,&(lvalues[4436]),0},
-{"msSmartcardLogin","Microsoft Smartcardlogin",NID_ms_smartcard_login,
-	10,&(lvalues[4437]),0},
-{"msUPN","Microsoft Universal Principal Name",NID_ms_upn,10,
-	&(lvalues[4447]),0},
-{"AES-128-CFB1","aes-128-cfb1",NID_aes_128_cfb1,0,NULL,0},
-{"AES-192-CFB1","aes-192-cfb1",NID_aes_192_cfb1,0,NULL,0},
-{"AES-256-CFB1","aes-256-cfb1",NID_aes_256_cfb1,0,NULL,0},
-{"AES-128-CFB8","aes-128-cfb8",NID_aes_128_cfb8,0,NULL,0},
-{"AES-192-CFB8","aes-192-cfb8",NID_aes_192_cfb8,0,NULL,0},
-{"AES-256-CFB8","aes-256-cfb8",NID_aes_256_cfb8,0,NULL,0},
-{"DES-CFB1","des-cfb1",NID_des_cfb1,0,NULL,0},
-{"DES-CFB8","des-cfb8",NID_des_cfb8,0,NULL,0},
-{"DES-EDE3-CFB1","des-ede3-cfb1",NID_des_ede3_cfb1,0,NULL,0},
-{"DES-EDE3-CFB8","des-ede3-cfb8",NID_des_ede3_cfb8,0,NULL,0},
-{"streetAddress","streetAddress",NID_streetAddress,3,&(lvalues[4457]),0},
-{"postalCode","postalCode",NID_postalCode,3,&(lvalues[4460]),0},
-{"id-ppl","id-ppl",NID_id_ppl,7,&(lvalues[4463]),0},
-{"proxyCertInfo","Proxy Certificate Information",NID_proxyCertInfo,8,
-	&(lvalues[4470]),0},
-{"id-ppl-anyLanguage","Any language",NID_id_ppl_anyLanguage,8,
-	&(lvalues[4478]),0},
-{"id-ppl-inheritAll","Inherit all",NID_id_ppl_inheritAll,8,
-	&(lvalues[4486]),0},
-{"nameConstraints","X509v3 Name Constraints",NID_name_constraints,3,
-	&(lvalues[4494]),0},
-{"id-ppl-independent","Independent",NID_Independent,8,&(lvalues[4497]),0},
-{"RSA-SHA256","sha256WithRSAEncryption",NID_sha256WithRSAEncryption,9,
-	&(lvalues[4505]),0},
-{"RSA-SHA384","sha384WithRSAEncryption",NID_sha384WithRSAEncryption,9,
-	&(lvalues[4514]),0},
-{"RSA-SHA512","sha512WithRSAEncryption",NID_sha512WithRSAEncryption,9,
-	&(lvalues[4523]),0},
-{"RSA-SHA224","sha224WithRSAEncryption",NID_sha224WithRSAEncryption,9,
-	&(lvalues[4532]),0},
-{"SHA256","sha256",NID_sha256,9,&(lvalues[4541]),0},
-{"SHA384","sha384",NID_sha384,9,&(lvalues[4550]),0},
-{"SHA512","sha512",NID_sha512,9,&(lvalues[4559]),0},
-{"SHA224","sha224",NID_sha224,9,&(lvalues[4568]),0},
-{"identified-organization","identified-organization",
-	NID_identified_organization,1,&(lvalues[4577]),0},
-{"certicom-arc","certicom-arc",NID_certicom_arc,3,&(lvalues[4578]),0},
-{"wap","wap",NID_wap,2,&(lvalues[4581]),0},
-{"wap-wsg","wap-wsg",NID_wap_wsg,3,&(lvalues[4583]),0},
-{"id-characteristic-two-basis","id-characteristic-two-basis",
-	NID_X9_62_id_characteristic_two_basis,8,&(lvalues[4586]),0},
-{"onBasis","onBasis",NID_X9_62_onBasis,9,&(lvalues[4594]),0},
-{"tpBasis","tpBasis",NID_X9_62_tpBasis,9,&(lvalues[4603]),0},
-{"ppBasis","ppBasis",NID_X9_62_ppBasis,9,&(lvalues[4612]),0},
-{"c2pnb163v1","c2pnb163v1",NID_X9_62_c2pnb163v1,8,&(lvalues[4621]),0},
-{"c2pnb163v2","c2pnb163v2",NID_X9_62_c2pnb163v2,8,&(lvalues[4629]),0},
-{"c2pnb163v3","c2pnb163v3",NID_X9_62_c2pnb163v3,8,&(lvalues[4637]),0},
-{"c2pnb176v1","c2pnb176v1",NID_X9_62_c2pnb176v1,8,&(lvalues[4645]),0},
-{"c2tnb191v1","c2tnb191v1",NID_X9_62_c2tnb191v1,8,&(lvalues[4653]),0},
-{"c2tnb191v2","c2tnb191v2",NID_X9_62_c2tnb191v2,8,&(lvalues[4661]),0},
-{"c2tnb191v3","c2tnb191v3",NID_X9_62_c2tnb191v3,8,&(lvalues[4669]),0},
-{"c2onb191v4","c2onb191v4",NID_X9_62_c2onb191v4,8,&(lvalues[4677]),0},
-{"c2onb191v5","c2onb191v5",NID_X9_62_c2onb191v5,8,&(lvalues[4685]),0},
-{"c2pnb208w1","c2pnb208w1",NID_X9_62_c2pnb208w1,8,&(lvalues[4693]),0},
-{"c2tnb239v1","c2tnb239v1",NID_X9_62_c2tnb239v1,8,&(lvalues[4701]),0},
-{"c2tnb239v2","c2tnb239v2",NID_X9_62_c2tnb239v2,8,&(lvalues[4709]),0},
-{"c2tnb239v3","c2tnb239v3",NID_X9_62_c2tnb239v3,8,&(lvalues[4717]),0},
-{"c2onb239v4","c2onb239v4",NID_X9_62_c2onb239v4,8,&(lvalues[4725]),0},
-{"c2onb239v5","c2onb239v5",NID_X9_62_c2onb239v5,8,&(lvalues[4733]),0},
-{"c2pnb272w1","c2pnb272w1",NID_X9_62_c2pnb272w1,8,&(lvalues[4741]),0},
-{"c2pnb304w1","c2pnb304w1",NID_X9_62_c2pnb304w1,8,&(lvalues[4749]),0},
-{"c2tnb359v1","c2tnb359v1",NID_X9_62_c2tnb359v1,8,&(lvalues[4757]),0},
-{"c2pnb368w1","c2pnb368w1",NID_X9_62_c2pnb368w1,8,&(lvalues[4765]),0},
-{"c2tnb431r1","c2tnb431r1",NID_X9_62_c2tnb431r1,8,&(lvalues[4773]),0},
-{"secp112r1","secp112r1",NID_secp112r1,5,&(lvalues[4781]),0},
-{"secp112r2","secp112r2",NID_secp112r2,5,&(lvalues[4786]),0},
-{"secp128r1","secp128r1",NID_secp128r1,5,&(lvalues[4791]),0},
-{"secp128r2","secp128r2",NID_secp128r2,5,&(lvalues[4796]),0},
-{"secp160k1","secp160k1",NID_secp160k1,5,&(lvalues[4801]),0},
-{"secp160r1","secp160r1",NID_secp160r1,5,&(lvalues[4806]),0},
-{"secp160r2","secp160r2",NID_secp160r2,5,&(lvalues[4811]),0},
-{"secp192k1","secp192k1",NID_secp192k1,5,&(lvalues[4816]),0},
-{"secp224k1","secp224k1",NID_secp224k1,5,&(lvalues[4821]),0},
-{"secp224r1","secp224r1",NID_secp224r1,5,&(lvalues[4826]),0},
-{"secp256k1","secp256k1",NID_secp256k1,5,&(lvalues[4831]),0},
-{"secp384r1","secp384r1",NID_secp384r1,5,&(lvalues[4836]),0},
-{"secp521r1","secp521r1",NID_secp521r1,5,&(lvalues[4841]),0},
-{"sect113r1","sect113r1",NID_sect113r1,5,&(lvalues[4846]),0},
-{"sect113r2","sect113r2",NID_sect113r2,5,&(lvalues[4851]),0},
-{"sect131r1","sect131r1",NID_sect131r1,5,&(lvalues[4856]),0},
-{"sect131r2","sect131r2",NID_sect131r2,5,&(lvalues[4861]),0},
-{"sect163k1","sect163k1",NID_sect163k1,5,&(lvalues[4866]),0},
-{"sect163r1","sect163r1",NID_sect163r1,5,&(lvalues[4871]),0},
-{"sect163r2","sect163r2",NID_sect163r2,5,&(lvalues[4876]),0},
-{"sect193r1","sect193r1",NID_sect193r1,5,&(lvalues[4881]),0},
-{"sect193r2","sect193r2",NID_sect193r2,5,&(lvalues[4886]),0},
-{"sect233k1","sect233k1",NID_sect233k1,5,&(lvalues[4891]),0},
-{"sect233r1","sect233r1",NID_sect233r1,5,&(lvalues[4896]),0},
-{"sect239k1","sect239k1",NID_sect239k1,5,&(lvalues[4901]),0},
-{"sect283k1","sect283k1",NID_sect283k1,5,&(lvalues[4906]),0},
-{"sect283r1","sect283r1",NID_sect283r1,5,&(lvalues[4911]),0},
-{"sect409k1","sect409k1",NID_sect409k1,5,&(lvalues[4916]),0},
-{"sect409r1","sect409r1",NID_sect409r1,5,&(lvalues[4921]),0},
-{"sect571k1","sect571k1",NID_sect571k1,5,&(lvalues[4926]),0},
-{"sect571r1","sect571r1",NID_sect571r1,5,&(lvalues[4931]),0},
-{"wap-wsg-idm-ecid-wtls1","wap-wsg-idm-ecid-wtls1",
-	NID_wap_wsg_idm_ecid_wtls1,5,&(lvalues[4936]),0},
-{"wap-wsg-idm-ecid-wtls3","wap-wsg-idm-ecid-wtls3",
-	NID_wap_wsg_idm_ecid_wtls3,5,&(lvalues[4941]),0},
-{"wap-wsg-idm-ecid-wtls4","wap-wsg-idm-ecid-wtls4",
-	NID_wap_wsg_idm_ecid_wtls4,5,&(lvalues[4946]),0},
-{"wap-wsg-idm-ecid-wtls5","wap-wsg-idm-ecid-wtls5",
-	NID_wap_wsg_idm_ecid_wtls5,5,&(lvalues[4951]),0},
-{"wap-wsg-idm-ecid-wtls6","wap-wsg-idm-ecid-wtls6",
-	NID_wap_wsg_idm_ecid_wtls6,5,&(lvalues[4956]),0},
-{"wap-wsg-idm-ecid-wtls7","wap-wsg-idm-ecid-wtls7",
-	NID_wap_wsg_idm_ecid_wtls7,5,&(lvalues[4961]),0},
-{"wap-wsg-idm-ecid-wtls8","wap-wsg-idm-ecid-wtls8",
-	NID_wap_wsg_idm_ecid_wtls8,5,&(lvalues[4966]),0},
-{"wap-wsg-idm-ecid-wtls9","wap-wsg-idm-ecid-wtls9",
-	NID_wap_wsg_idm_ecid_wtls9,5,&(lvalues[4971]),0},
-{"wap-wsg-idm-ecid-wtls10","wap-wsg-idm-ecid-wtls10",
-	NID_wap_wsg_idm_ecid_wtls10,5,&(lvalues[4976]),0},
-{"wap-wsg-idm-ecid-wtls11","wap-wsg-idm-ecid-wtls11",
-	NID_wap_wsg_idm_ecid_wtls11,5,&(lvalues[4981]),0},
-{"wap-wsg-idm-ecid-wtls12","wap-wsg-idm-ecid-wtls12",
-	NID_wap_wsg_idm_ecid_wtls12,5,&(lvalues[4986]),0},
-{"anyPolicy","X509v3 Any Policy",NID_any_policy,4,&(lvalues[4991]),0},
-{"policyMappings","X509v3 Policy Mappings",NID_policy_mappings,3,
-	&(lvalues[4995]),0},
-{"inhibitAnyPolicy","X509v3 Inhibit Any Policy",
-	NID_inhibit_any_policy,3,&(lvalues[4998]),0},
-{"Oakley-EC2N-3","ipsec3",NID_ipsec3,0,NULL,0},
-{"Oakley-EC2N-4","ipsec4",NID_ipsec4,0,NULL,0},
-{"CAMELLIA-128-CBC","camellia-128-cbc",NID_camellia_128_cbc,11,
-	&(lvalues[5001]),0},
-{"CAMELLIA-192-CBC","camellia-192-cbc",NID_camellia_192_cbc,11,
-	&(lvalues[5012]),0},
-{"CAMELLIA-256-CBC","camellia-256-cbc",NID_camellia_256_cbc,11,
-	&(lvalues[5023]),0},
-{"CAMELLIA-128-ECB","camellia-128-ecb",NID_camellia_128_ecb,8,
-	&(lvalues[5034]),0},
-{"CAMELLIA-192-ECB","camellia-192-ecb",NID_camellia_192_ecb,8,
-	&(lvalues[5042]),0},
-{"CAMELLIA-256-ECB","camellia-256-ecb",NID_camellia_256_ecb,8,
-	&(lvalues[5050]),0},
-{"CAMELLIA-128-CFB","camellia-128-cfb",NID_camellia_128_cfb128,8,
-	&(lvalues[5058]),0},
-{"CAMELLIA-192-CFB","camellia-192-cfb",NID_camellia_192_cfb128,8,
-	&(lvalues[5066]),0},
-{"CAMELLIA-256-CFB","camellia-256-cfb",NID_camellia_256_cfb128,8,
-	&(lvalues[5074]),0},
-{"CAMELLIA-128-CFB1","camellia-128-cfb1",NID_camellia_128_cfb1,0,NULL,0},
-{"CAMELLIA-192-CFB1","camellia-192-cfb1",NID_camellia_192_cfb1,0,NULL,0},
-{"CAMELLIA-256-CFB1","camellia-256-cfb1",NID_camellia_256_cfb1,0,NULL,0},
-{"CAMELLIA-128-CFB8","camellia-128-cfb8",NID_camellia_128_cfb8,0,NULL,0},
-{"CAMELLIA-192-CFB8","camellia-192-cfb8",NID_camellia_192_cfb8,0,NULL,0},
-{"CAMELLIA-256-CFB8","camellia-256-cfb8",NID_camellia_256_cfb8,0,NULL,0},
-{"CAMELLIA-128-OFB","camellia-128-ofb",NID_camellia_128_ofb128,8,
-	&(lvalues[5082]),0},
-{"CAMELLIA-192-OFB","camellia-192-ofb",NID_camellia_192_ofb128,8,
-	&(lvalues[5090]),0},
-{"CAMELLIA-256-OFB","camellia-256-ofb",NID_camellia_256_ofb128,8,
-	&(lvalues[5098]),0},
-{"subjectDirectoryAttributes","X509v3 Subject Directory Attributes",
-	NID_subject_directory_attributes,3,&(lvalues[5106]),0},
-{"issuingDistributionPoint","X509v3 Issuing Distrubution Point",
-	NID_issuing_distribution_point,3,&(lvalues[5109]),0},
-{"certificateIssuer","X509v3 Certificate Issuer",
-	NID_certificate_issuer,3,&(lvalues[5112]),0},
-};
-
-static ASN1_OBJECT *sn_objs[NUM_SN]={
-&(nid_objs[364]),/* "AD_DVCS" */
-&(nid_objs[419]),/* "AES-128-CBC" */
-&(nid_objs[421]),/* "AES-128-CFB" */
-&(nid_objs[650]),/* "AES-128-CFB1" */
-&(nid_objs[653]),/* "AES-128-CFB8" */
-&(nid_objs[418]),/* "AES-128-ECB" */
-&(nid_objs[420]),/* "AES-128-OFB" */
-&(nid_objs[423]),/* "AES-192-CBC" */
-&(nid_objs[425]),/* "AES-192-CFB" */
-&(nid_objs[651]),/* "AES-192-CFB1" */
-&(nid_objs[654]),/* "AES-192-CFB8" */
-&(nid_objs[422]),/* "AES-192-ECB" */
-&(nid_objs[424]),/* "AES-192-OFB" */
-&(nid_objs[427]),/* "AES-256-CBC" */
-&(nid_objs[429]),/* "AES-256-CFB" */
-&(nid_objs[652]),/* "AES-256-CFB1" */
-&(nid_objs[655]),/* "AES-256-CFB8" */
-&(nid_objs[426]),/* "AES-256-ECB" */
-&(nid_objs[428]),/* "AES-256-OFB" */
-&(nid_objs[91]),/* "BF-CBC" */
-&(nid_objs[93]),/* "BF-CFB" */
-&(nid_objs[92]),/* "BF-ECB" */
-&(nid_objs[94]),/* "BF-OFB" */
-&(nid_objs[14]),/* "C" */
-&(nid_objs[751]),/* "CAMELLIA-128-CBC" */
-&(nid_objs[757]),/* "CAMELLIA-128-CFB" */
-&(nid_objs[760]),/* "CAMELLIA-128-CFB1" */
-&(nid_objs[763]),/* "CAMELLIA-128-CFB8" */
-&(nid_objs[754]),/* "CAMELLIA-128-ECB" */
-&(nid_objs[766]),/* "CAMELLIA-128-OFB" */
-&(nid_objs[752]),/* "CAMELLIA-192-CBC" */
-&(nid_objs[758]),/* "CAMELLIA-192-CFB" */
-&(nid_objs[761]),/* "CAMELLIA-192-CFB1" */
-&(nid_objs[764]),/* "CAMELLIA-192-CFB8" */
-&(nid_objs[755]),/* "CAMELLIA-192-ECB" */
-&(nid_objs[767]),/* "CAMELLIA-192-OFB" */
-&(nid_objs[753]),/* "CAMELLIA-256-CBC" */
-&(nid_objs[759]),/* "CAMELLIA-256-CFB" */
-&(nid_objs[762]),/* "CAMELLIA-256-CFB1" */
-&(nid_objs[765]),/* "CAMELLIA-256-CFB8" */
-&(nid_objs[756]),/* "CAMELLIA-256-ECB" */
-&(nid_objs[768]),/* "CAMELLIA-256-OFB" */
-&(nid_objs[108]),/* "CAST5-CBC" */
-&(nid_objs[110]),/* "CAST5-CFB" */
-&(nid_objs[109]),/* "CAST5-ECB" */
-&(nid_objs[111]),/* "CAST5-OFB" */
-&(nid_objs[13]),/* "CN" */
-&(nid_objs[141]),/* "CRLReason" */
-&(nid_objs[417]),/* "CSPName" */
-&(nid_objs[367]),/* "CrlID" */
-&(nid_objs[391]),/* "DC" */
-&(nid_objs[31]),/* "DES-CBC" */
-&(nid_objs[643]),/* "DES-CDMF" */
-&(nid_objs[30]),/* "DES-CFB" */
-&(nid_objs[656]),/* "DES-CFB1" */
-&(nid_objs[657]),/* "DES-CFB8" */
-&(nid_objs[29]),/* "DES-ECB" */
-&(nid_objs[32]),/* "DES-EDE" */
-&(nid_objs[43]),/* "DES-EDE-CBC" */
-&(nid_objs[60]),/* "DES-EDE-CFB" */
-&(nid_objs[62]),/* "DES-EDE-OFB" */
-&(nid_objs[33]),/* "DES-EDE3" */
-&(nid_objs[44]),/* "DES-EDE3-CBC" */
-&(nid_objs[61]),/* "DES-EDE3-CFB" */
-&(nid_objs[658]),/* "DES-EDE3-CFB1" */
-&(nid_objs[659]),/* "DES-EDE3-CFB8" */
-&(nid_objs[63]),/* "DES-EDE3-OFB" */
-&(nid_objs[45]),/* "DES-OFB" */
-&(nid_objs[80]),/* "DESX-CBC" */
-&(nid_objs[380]),/* "DOD" */
-&(nid_objs[116]),/* "DSA" */
-&(nid_objs[66]),/* "DSA-SHA" */
-&(nid_objs[113]),/* "DSA-SHA1" */
-&(nid_objs[70]),/* "DSA-SHA1-old" */
-&(nid_objs[67]),/* "DSA-old" */
-&(nid_objs[297]),/* "DVCS" */
-&(nid_objs[99]),/* "GN" */
-&(nid_objs[381]),/* "IANA" */
-&(nid_objs[34]),/* "IDEA-CBC" */
-&(nid_objs[35]),/* "IDEA-CFB" */
-&(nid_objs[36]),/* "IDEA-ECB" */
-&(nid_objs[46]),/* "IDEA-OFB" */
-&(nid_objs[181]),/* "ISO" */
-&(nid_objs[183]),/* "ISO-US" */
-&(nid_objs[645]),/* "ITU-T" */
-&(nid_objs[646]),/* "JOINT-ISO-ITU-T" */
-&(nid_objs[15]),/* "L" */
-&(nid_objs[ 3]),/* "MD2" */
-&(nid_objs[257]),/* "MD4" */
-&(nid_objs[ 4]),/* "MD5" */
-&(nid_objs[114]),/* "MD5-SHA1" */
-&(nid_objs[95]),/* "MDC2" */
-&(nid_objs[388]),/* "Mail" */
-&(nid_objs[393]),/* "NULL" */
-&(nid_objs[404]),/* "NULL" */
-&(nid_objs[57]),/* "Netscape" */
-&(nid_objs[366]),/* "Nonce" */
-&(nid_objs[17]),/* "O" */
-&(nid_objs[178]),/* "OCSP" */
-&(nid_objs[180]),/* "OCSPSigning" */
-&(nid_objs[379]),/* "ORG" */
-&(nid_objs[18]),/* "OU" */
-&(nid_objs[749]),/* "Oakley-EC2N-3" */
-&(nid_objs[750]),/* "Oakley-EC2N-4" */
-&(nid_objs[ 9]),/* "PBE-MD2-DES" */
-&(nid_objs[168]),/* "PBE-MD2-RC2-64" */
-&(nid_objs[10]),/* "PBE-MD5-DES" */
-&(nid_objs[169]),/* "PBE-MD5-RC2-64" */
-&(nid_objs[147]),/* "PBE-SHA1-2DES" */
-&(nid_objs[146]),/* "PBE-SHA1-3DES" */
-&(nid_objs[170]),/* "PBE-SHA1-DES" */
-&(nid_objs[148]),/* "PBE-SHA1-RC2-128" */
-&(nid_objs[149]),/* "PBE-SHA1-RC2-40" */
-&(nid_objs[68]),/* "PBE-SHA1-RC2-64" */
-&(nid_objs[144]),/* "PBE-SHA1-RC4-128" */
-&(nid_objs[145]),/* "PBE-SHA1-RC4-40" */
-&(nid_objs[161]),/* "PBES2" */
-&(nid_objs[69]),/* "PBKDF2" */
-&(nid_objs[162]),/* "PBMAC1" */
-&(nid_objs[127]),/* "PKIX" */
-&(nid_objs[98]),/* "RC2-40-CBC" */
-&(nid_objs[166]),/* "RC2-64-CBC" */
-&(nid_objs[37]),/* "RC2-CBC" */
-&(nid_objs[39]),/* "RC2-CFB" */
-&(nid_objs[38]),/* "RC2-ECB" */
-&(nid_objs[40]),/* "RC2-OFB" */
-&(nid_objs[ 5]),/* "RC4" */
-&(nid_objs[97]),/* "RC4-40" */
-&(nid_objs[120]),/* "RC5-CBC" */
-&(nid_objs[122]),/* "RC5-CFB" */
-&(nid_objs[121]),/* "RC5-ECB" */
-&(nid_objs[123]),/* "RC5-OFB" */
-&(nid_objs[117]),/* "RIPEMD160" */
-&(nid_objs[124]),/* "RLE" */
-&(nid_objs[19]),/* "RSA" */
-&(nid_objs[ 7]),/* "RSA-MD2" */
-&(nid_objs[396]),/* "RSA-MD4" */
-&(nid_objs[ 8]),/* "RSA-MD5" */
-&(nid_objs[96]),/* "RSA-MDC2" */
-&(nid_objs[104]),/* "RSA-NP-MD5" */
-&(nid_objs[119]),/* "RSA-RIPEMD160" */
-&(nid_objs[42]),/* "RSA-SHA" */
-&(nid_objs[65]),/* "RSA-SHA1" */
-&(nid_objs[115]),/* "RSA-SHA1-2" */
-&(nid_objs[671]),/* "RSA-SHA224" */
-&(nid_objs[668]),/* "RSA-SHA256" */
-&(nid_objs[669]),/* "RSA-SHA384" */
-&(nid_objs[670]),/* "RSA-SHA512" */
-&(nid_objs[41]),/* "SHA" */
-&(nid_objs[64]),/* "SHA1" */
-&(nid_objs[675]),/* "SHA224" */
-&(nid_objs[672]),/* "SHA256" */
-&(nid_objs[673]),/* "SHA384" */
-&(nid_objs[674]),/* "SHA512" */
-&(nid_objs[188]),/* "SMIME" */
-&(nid_objs[167]),/* "SMIME-CAPS" */
-&(nid_objs[100]),/* "SN" */
-&(nid_objs[16]),/* "ST" */
-&(nid_objs[143]),/* "SXNetID" */
-&(nid_objs[458]),/* "UID" */
-&(nid_objs[ 0]),/* "UNDEF" */
-&(nid_objs[11]),/* "X500" */
-&(nid_objs[378]),/* "X500algorithms" */
-&(nid_objs[12]),/* "X509" */
-&(nid_objs[184]),/* "X9-57" */
-&(nid_objs[185]),/* "X9cm" */
-&(nid_objs[125]),/* "ZLIB" */
-&(nid_objs[478]),/* "aRecord" */
-&(nid_objs[289]),/* "aaControls" */
-&(nid_objs[287]),/* "ac-auditEntity" */
-&(nid_objs[397]),/* "ac-proxying" */
-&(nid_objs[288]),/* "ac-targeting" */
-&(nid_objs[368]),/* "acceptableResponses" */
-&(nid_objs[446]),/* "account" */
-&(nid_objs[363]),/* "ad_timestamping" */
-&(nid_objs[376]),/* "algorithm" */
-&(nid_objs[405]),/* "ansi-X9-62" */
-&(nid_objs[746]),/* "anyPolicy" */
-&(nid_objs[370]),/* "archiveCutoff" */
-&(nid_objs[484]),/* "associatedDomain" */
-&(nid_objs[485]),/* "associatedName" */
-&(nid_objs[501]),/* "audio" */
-&(nid_objs[177]),/* "authorityInfoAccess" */
-&(nid_objs[90]),/* "authorityKeyIdentifier" */
-&(nid_objs[87]),/* "basicConstraints" */
-&(nid_objs[365]),/* "basicOCSPResponse" */
-&(nid_objs[285]),/* "biometricInfo" */
-&(nid_objs[494]),/* "buildingName" */
-&(nid_objs[691]),/* "c2onb191v4" */
-&(nid_objs[692]),/* "c2onb191v5" */
-&(nid_objs[697]),/* "c2onb239v4" */
-&(nid_objs[698]),/* "c2onb239v5" */
-&(nid_objs[684]),/* "c2pnb163v1" */
-&(nid_objs[685]),/* "c2pnb163v2" */
-&(nid_objs[686]),/* "c2pnb163v3" */
-&(nid_objs[687]),/* "c2pnb176v1" */
-&(nid_objs[693]),/* "c2pnb208w1" */
-&(nid_objs[699]),/* "c2pnb272w1" */
-&(nid_objs[700]),/* "c2pnb304w1" */
-&(nid_objs[702]),/* "c2pnb368w1" */
-&(nid_objs[688]),/* "c2tnb191v1" */
-&(nid_objs[689]),/* "c2tnb191v2" */
-&(nid_objs[690]),/* "c2tnb191v3" */
-&(nid_objs[694]),/* "c2tnb239v1" */
-&(nid_objs[695]),/* "c2tnb239v2" */
-&(nid_objs[696]),/* "c2tnb239v3" */
-&(nid_objs[701]),/* "c2tnb359v1" */
-&(nid_objs[703]),/* "c2tnb431r1" */
-&(nid_objs[483]),/* "cNAMERecord" */
-&(nid_objs[179]),/* "caIssuers" */
-&(nid_objs[443]),/* "caseIgnoreIA5StringSyntax" */
-&(nid_objs[152]),/* "certBag" */
-&(nid_objs[677]),/* "certicom-arc" */
-&(nid_objs[771]),/* "certificateIssuer" */
-&(nid_objs[89]),/* "certificatePolicies" */
-&(nid_objs[54]),/* "challengePassword" */
-&(nid_objs[407]),/* "characteristic-two-field" */
-&(nid_objs[395]),/* "clearance" */
-&(nid_objs[130]),/* "clientAuth" */
-&(nid_objs[131]),/* "codeSigning" */
-&(nid_objs[50]),/* "contentType" */
-&(nid_objs[53]),/* "countersignature" */
-&(nid_objs[153]),/* "crlBag" */
-&(nid_objs[103]),/* "crlDistributionPoints" */
-&(nid_objs[88]),/* "crlNumber" */
-&(nid_objs[500]),/* "dITRedirect" */
-&(nid_objs[451]),/* "dNSDomain" */
-&(nid_objs[495]),/* "dSAQuality" */
-&(nid_objs[434]),/* "data" */
-&(nid_objs[390]),/* "dcobject" */
-&(nid_objs[140]),/* "deltaCRL" */
-&(nid_objs[107]),/* "description" */
-&(nid_objs[28]),/* "dhKeyAgreement" */
-&(nid_objs[382]),/* "directory" */
-&(nid_objs[174]),/* "dnQualifier" */
-&(nid_objs[447]),/* "document" */
-&(nid_objs[471]),/* "documentAuthor" */
-&(nid_objs[468]),/* "documentIdentifier" */
-&(nid_objs[472]),/* "documentLocation" */
-&(nid_objs[502]),/* "documentPublisher" */
-&(nid_objs[449]),/* "documentSeries" */
-&(nid_objs[469]),/* "documentTitle" */
-&(nid_objs[470]),/* "documentVersion" */
-&(nid_objs[392]),/* "domain" */
-&(nid_objs[452]),/* "domainRelatedObject" */
-&(nid_objs[416]),/* "ecdsa-with-SHA1" */
-&(nid_objs[48]),/* "emailAddress" */
-&(nid_objs[132]),/* "emailProtection" */
-&(nid_objs[389]),/* "enterprises" */
-&(nid_objs[384]),/* "experimental" */
-&(nid_objs[172]),/* "extReq" */
-&(nid_objs[56]),/* "extendedCertificateAttributes" */
-&(nid_objs[126]),/* "extendedKeyUsage" */
-&(nid_objs[372]),/* "extendedStatus" */
-&(nid_objs[462]),/* "favouriteDrink" */
-&(nid_objs[453]),/* "friendlyCountry" */
-&(nid_objs[490]),/* "friendlyCountryName" */
-&(nid_objs[156]),/* "friendlyName" */
-&(nid_objs[509]),/* "generationQualifier" */
-&(nid_objs[163]),/* "hmacWithSHA1" */
-&(nid_objs[432]),/* "holdInstructionCallIssuer" */
-&(nid_objs[430]),/* "holdInstructionCode" */
-&(nid_objs[431]),/* "holdInstructionNone" */
-&(nid_objs[433]),/* "holdInstructionReject" */
-&(nid_objs[486]),/* "homePostalAddress" */
-&(nid_objs[473]),/* "homeTelephoneNumber" */
-&(nid_objs[466]),/* "host" */
-&(nid_objs[442]),/* "iA5StringSyntax" */
-&(nid_objs[266]),/* "id-aca" */
-&(nid_objs[355]),/* "id-aca-accessIdentity" */
-&(nid_objs[354]),/* "id-aca-authenticationInfo" */
-&(nid_objs[356]),/* "id-aca-chargingIdentity" */
-&(nid_objs[399]),/* "id-aca-encAttrs" */
-&(nid_objs[357]),/* "id-aca-group" */
-&(nid_objs[358]),/* "id-aca-role" */
-&(nid_objs[176]),/* "id-ad" */
-&(nid_objs[262]),/* "id-alg" */
-&(nid_objs[323]),/* "id-alg-des40" */
-&(nid_objs[326]),/* "id-alg-dh-pop" */
-&(nid_objs[325]),/* "id-alg-dh-sig-hmac-sha1" */
-&(nid_objs[324]),/* "id-alg-noSignature" */
-&(nid_objs[268]),/* "id-cct" */
-&(nid_objs[361]),/* "id-cct-PKIData" */
-&(nid_objs[362]),/* "id-cct-PKIResponse" */
-&(nid_objs[360]),/* "id-cct-crs" */
-&(nid_objs[81]),/* "id-ce" */
-&(nid_objs[680]),/* "id-characteristic-two-basis" */
-&(nid_objs[263]),/* "id-cmc" */
-&(nid_objs[334]),/* "id-cmc-addExtensions" */
-&(nid_objs[346]),/* "id-cmc-confirmCertAcceptance" */
-&(nid_objs[330]),/* "id-cmc-dataReturn" */
-&(nid_objs[336]),/* "id-cmc-decryptedPOP" */
-&(nid_objs[335]),/* "id-cmc-encryptedPOP" */
-&(nid_objs[339]),/* "id-cmc-getCRL" */
-&(nid_objs[338]),/* "id-cmc-getCert" */
-&(nid_objs[328]),/* "id-cmc-identification" */
-&(nid_objs[329]),/* "id-cmc-identityProof" */
-&(nid_objs[337]),/* "id-cmc-lraPOPWitness" */
-&(nid_objs[344]),/* "id-cmc-popLinkRandom" */
-&(nid_objs[345]),/* "id-cmc-popLinkWitness" */
-&(nid_objs[343]),/* "id-cmc-queryPending" */
-&(nid_objs[333]),/* "id-cmc-recipientNonce" */
-&(nid_objs[341]),/* "id-cmc-regInfo" */
-&(nid_objs[342]),/* "id-cmc-responseInfo" */
-&(nid_objs[340]),/* "id-cmc-revokeRequest" */
-&(nid_objs[332]),/* "id-cmc-senderNonce" */
-&(nid_objs[327]),/* "id-cmc-statusInfo" */
-&(nid_objs[331]),/* "id-cmc-transactionId" */
-&(nid_objs[408]),/* "id-ecPublicKey" */
-&(nid_objs[508]),/* "id-hex-multipart-message" */
-&(nid_objs[507]),/* "id-hex-partial-message" */
-&(nid_objs[260]),/* "id-it" */
-&(nid_objs[302]),/* "id-it-caKeyUpdateInfo" */
-&(nid_objs[298]),/* "id-it-caProtEncCert" */
-&(nid_objs[311]),/* "id-it-confirmWaitTime" */
-&(nid_objs[303]),/* "id-it-currentCRL" */
-&(nid_objs[300]),/* "id-it-encKeyPairTypes" */
-&(nid_objs[310]),/* "id-it-implicitConfirm" */
-&(nid_objs[308]),/* "id-it-keyPairParamRep" */
-&(nid_objs[307]),/* "id-it-keyPairParamReq" */
-&(nid_objs[312]),/* "id-it-origPKIMessage" */
-&(nid_objs[301]),/* "id-it-preferredSymmAlg" */
-&(nid_objs[309]),/* "id-it-revPassphrase" */
-&(nid_objs[299]),/* "id-it-signKeyPairTypes" */
-&(nid_objs[305]),/* "id-it-subscriptionRequest" */
-&(nid_objs[306]),/* "id-it-subscriptionResponse" */
-&(nid_objs[304]),/* "id-it-unsupportedOIDs" */
-&(nid_objs[128]),/* "id-kp" */
-&(nid_objs[280]),/* "id-mod-attribute-cert" */
-&(nid_objs[274]),/* "id-mod-cmc" */
-&(nid_objs[277]),/* "id-mod-cmp" */
-&(nid_objs[284]),/* "id-mod-cmp2000" */
-&(nid_objs[273]),/* "id-mod-crmf" */
-&(nid_objs[283]),/* "id-mod-dvcs" */
-&(nid_objs[275]),/* "id-mod-kea-profile-88" */
-&(nid_objs[276]),/* "id-mod-kea-profile-93" */
-&(nid_objs[282]),/* "id-mod-ocsp" */
-&(nid_objs[278]),/* "id-mod-qualified-cert-88" */
-&(nid_objs[279]),/* "id-mod-qualified-cert-93" */
-&(nid_objs[281]),/* "id-mod-timestamp-protocol" */
-&(nid_objs[264]),/* "id-on" */
-&(nid_objs[347]),/* "id-on-personalData" */
-&(nid_objs[265]),/* "id-pda" */
-&(nid_objs[352]),/* "id-pda-countryOfCitizenship" */
-&(nid_objs[353]),/* "id-pda-countryOfResidence" */
-&(nid_objs[348]),/* "id-pda-dateOfBirth" */
-&(nid_objs[351]),/* "id-pda-gender" */
-&(nid_objs[349]),/* "id-pda-placeOfBirth" */
-&(nid_objs[175]),/* "id-pe" */
-&(nid_objs[261]),/* "id-pkip" */
-&(nid_objs[258]),/* "id-pkix-mod" */
-&(nid_objs[269]),/* "id-pkix1-explicit-88" */
-&(nid_objs[271]),/* "id-pkix1-explicit-93" */
-&(nid_objs[270]),/* "id-pkix1-implicit-88" */
-&(nid_objs[272]),/* "id-pkix1-implicit-93" */
-&(nid_objs[662]),/* "id-ppl" */
-&(nid_objs[664]),/* "id-ppl-anyLanguage" */
-&(nid_objs[667]),/* "id-ppl-independent" */
-&(nid_objs[665]),/* "id-ppl-inheritAll" */
-&(nid_objs[267]),/* "id-qcs" */
-&(nid_objs[359]),/* "id-qcs-pkixQCSyntax-v1" */
-&(nid_objs[259]),/* "id-qt" */
-&(nid_objs[164]),/* "id-qt-cps" */
-&(nid_objs[165]),/* "id-qt-unotice" */
-&(nid_objs[313]),/* "id-regCtrl" */
-&(nid_objs[316]),/* "id-regCtrl-authenticator" */
-&(nid_objs[319]),/* "id-regCtrl-oldCertID" */
-&(nid_objs[318]),/* "id-regCtrl-pkiArchiveOptions" */
-&(nid_objs[317]),/* "id-regCtrl-pkiPublicationInfo" */
-&(nid_objs[320]),/* "id-regCtrl-protocolEncrKey" */
-&(nid_objs[315]),/* "id-regCtrl-regToken" */
-&(nid_objs[314]),/* "id-regInfo" */
-&(nid_objs[322]),/* "id-regInfo-certReq" */
-&(nid_objs[321]),/* "id-regInfo-utf8Pairs" */
-&(nid_objs[512]),/* "id-set" */
-&(nid_objs[191]),/* "id-smime-aa" */
-&(nid_objs[215]),/* "id-smime-aa-contentHint" */
-&(nid_objs[218]),/* "id-smime-aa-contentIdentifier" */
-&(nid_objs[221]),/* "id-smime-aa-contentReference" */
-&(nid_objs[240]),/* "id-smime-aa-dvcs-dvc" */
-&(nid_objs[217]),/* "id-smime-aa-encapContentType" */
-&(nid_objs[222]),/* "id-smime-aa-encrypKeyPref" */
-&(nid_objs[220]),/* "id-smime-aa-equivalentLabels" */
-&(nid_objs[232]),/* "id-smime-aa-ets-CertificateRefs" */
-&(nid_objs[233]),/* "id-smime-aa-ets-RevocationRefs" */
-&(nid_objs[238]),/* "id-smime-aa-ets-archiveTimeStamp" */
-&(nid_objs[237]),/* "id-smime-aa-ets-certCRLTimestamp" */
-&(nid_objs[234]),/* "id-smime-aa-ets-certValues" */
-&(nid_objs[227]),/* "id-smime-aa-ets-commitmentType" */
-&(nid_objs[231]),/* "id-smime-aa-ets-contentTimestamp" */
-&(nid_objs[236]),/* "id-smime-aa-ets-escTimeStamp" */
-&(nid_objs[230]),/* "id-smime-aa-ets-otherSigCert" */
-&(nid_objs[235]),/* "id-smime-aa-ets-revocationValues" */
-&(nid_objs[226]),/* "id-smime-aa-ets-sigPolicyId" */
-&(nid_objs[229]),/* "id-smime-aa-ets-signerAttr" */
-&(nid_objs[228]),/* "id-smime-aa-ets-signerLocation" */
-&(nid_objs[219]),/* "id-smime-aa-macValue" */
-&(nid_objs[214]),/* "id-smime-aa-mlExpandHistory" */
-&(nid_objs[216]),/* "id-smime-aa-msgSigDigest" */
-&(nid_objs[212]),/* "id-smime-aa-receiptRequest" */
-&(nid_objs[213]),/* "id-smime-aa-securityLabel" */
-&(nid_objs[239]),/* "id-smime-aa-signatureType" */
-&(nid_objs[223]),/* "id-smime-aa-signingCertificate" */
-&(nid_objs[224]),/* "id-smime-aa-smimeEncryptCerts" */
-&(nid_objs[225]),/* "id-smime-aa-timeStampToken" */
-&(nid_objs[192]),/* "id-smime-alg" */
-&(nid_objs[243]),/* "id-smime-alg-3DESwrap" */
-&(nid_objs[246]),/* "id-smime-alg-CMS3DESwrap" */
-&(nid_objs[247]),/* "id-smime-alg-CMSRC2wrap" */
-&(nid_objs[245]),/* "id-smime-alg-ESDH" */
-&(nid_objs[241]),/* "id-smime-alg-ESDHwith3DES" */
-&(nid_objs[242]),/* "id-smime-alg-ESDHwithRC2" */
-&(nid_objs[244]),/* "id-smime-alg-RC2wrap" */
-&(nid_objs[193]),/* "id-smime-cd" */
-&(nid_objs[248]),/* "id-smime-cd-ldap" */
-&(nid_objs[190]),/* "id-smime-ct" */
-&(nid_objs[210]),/* "id-smime-ct-DVCSRequestData" */
-&(nid_objs[211]),/* "id-smime-ct-DVCSResponseData" */
-&(nid_objs[208]),/* "id-smime-ct-TDTInfo" */
-&(nid_objs[207]),/* "id-smime-ct-TSTInfo" */
-&(nid_objs[205]),/* "id-smime-ct-authData" */
-&(nid_objs[209]),/* "id-smime-ct-contentInfo" */
-&(nid_objs[206]),/* "id-smime-ct-publishCert" */
-&(nid_objs[204]),/* "id-smime-ct-receipt" */
-&(nid_objs[195]),/* "id-smime-cti" */
-&(nid_objs[255]),/* "id-smime-cti-ets-proofOfApproval" */
-&(nid_objs[256]),/* "id-smime-cti-ets-proofOfCreation" */
-&(nid_objs[253]),/* "id-smime-cti-ets-proofOfDelivery" */
-&(nid_objs[251]),/* "id-smime-cti-ets-proofOfOrigin" */
-&(nid_objs[252]),/* "id-smime-cti-ets-proofOfReceipt" */
-&(nid_objs[254]),/* "id-smime-cti-ets-proofOfSender" */
-&(nid_objs[189]),/* "id-smime-mod" */
-&(nid_objs[196]),/* "id-smime-mod-cms" */
-&(nid_objs[197]),/* "id-smime-mod-ess" */
-&(nid_objs[202]),/* "id-smime-mod-ets-eSigPolicy-88" */
-&(nid_objs[203]),/* "id-smime-mod-ets-eSigPolicy-97" */
-&(nid_objs[200]),/* "id-smime-mod-ets-eSignature-88" */
-&(nid_objs[201]),/* "id-smime-mod-ets-eSignature-97" */
-&(nid_objs[199]),/* "id-smime-mod-msg-v3" */
-&(nid_objs[198]),/* "id-smime-mod-oid" */
-&(nid_objs[194]),/* "id-smime-spq" */
-&(nid_objs[250]),/* "id-smime-spq-ets-sqt-unotice" */
-&(nid_objs[249]),/* "id-smime-spq-ets-sqt-uri" */
-&(nid_objs[676]),/* "identified-organization" */
-&(nid_objs[461]),/* "info" */
-&(nid_objs[748]),/* "inhibitAnyPolicy" */
-&(nid_objs[101]),/* "initials" */
-&(nid_objs[647]),/* "international-organizations" */
-&(nid_objs[142]),/* "invalidityDate" */
-&(nid_objs[294]),/* "ipsecEndSystem" */
-&(nid_objs[295]),/* "ipsecTunnel" */
-&(nid_objs[296]),/* "ipsecUser" */
-&(nid_objs[86]),/* "issuerAltName" */
-&(nid_objs[770]),/* "issuingDistributionPoint" */
-&(nid_objs[492]),/* "janetMailbox" */
-&(nid_objs[150]),/* "keyBag" */
-&(nid_objs[83]),/* "keyUsage" */
-&(nid_objs[477]),/* "lastModifiedBy" */
-&(nid_objs[476]),/* "lastModifiedTime" */
-&(nid_objs[157]),/* "localKeyID" */
-&(nid_objs[480]),/* "mXRecord" */
-&(nid_objs[460]),/* "mail" */
-&(nid_objs[493]),/* "mailPreferenceOption" */
-&(nid_objs[467]),/* "manager" */
-&(nid_objs[182]),/* "member-body" */
-&(nid_objs[51]),/* "messageDigest" */
-&(nid_objs[383]),/* "mgmt" */
-&(nid_objs[504]),/* "mime-mhs" */
-&(nid_objs[506]),/* "mime-mhs-bodies" */
-&(nid_objs[505]),/* "mime-mhs-headings" */
-&(nid_objs[488]),/* "mobileTelephoneNumber" */
-&(nid_objs[136]),/* "msCTLSign" */
-&(nid_objs[135]),/* "msCodeCom" */
-&(nid_objs[134]),/* "msCodeInd" */
-&(nid_objs[138]),/* "msEFS" */
-&(nid_objs[171]),/* "msExtReq" */
-&(nid_objs[137]),/* "msSGC" */
-&(nid_objs[648]),/* "msSmartcardLogin" */
-&(nid_objs[649]),/* "msUPN" */
-&(nid_objs[481]),/* "nSRecord" */
-&(nid_objs[173]),/* "name" */
-&(nid_objs[666]),/* "nameConstraints" */
-&(nid_objs[369]),/* "noCheck" */
-&(nid_objs[403]),/* "noRevAvail" */
-&(nid_objs[72]),/* "nsBaseUrl" */
-&(nid_objs[76]),/* "nsCaPolicyUrl" */
-&(nid_objs[74]),/* "nsCaRevocationUrl" */
-&(nid_objs[58]),/* "nsCertExt" */
-&(nid_objs[79]),/* "nsCertSequence" */
-&(nid_objs[71]),/* "nsCertType" */
-&(nid_objs[78]),/* "nsComment" */
-&(nid_objs[59]),/* "nsDataType" */
-&(nid_objs[75]),/* "nsRenewalUrl" */
-&(nid_objs[73]),/* "nsRevocationUrl" */
-&(nid_objs[139]),/* "nsSGC" */
-&(nid_objs[77]),/* "nsSslServerName" */
-&(nid_objs[681]),/* "onBasis" */
-&(nid_objs[491]),/* "organizationalStatus" */
-&(nid_objs[475]),/* "otherMailbox" */
-&(nid_objs[489]),/* "pagerTelephoneNumber" */
-&(nid_objs[374]),/* "path" */
-&(nid_objs[112]),/* "pbeWithMD5AndCast5CBC" */
-&(nid_objs[499]),/* "personalSignature" */
-&(nid_objs[487]),/* "personalTitle" */
-&(nid_objs[464]),/* "photo" */
-&(nid_objs[437]),/* "pilot" */
-&(nid_objs[439]),/* "pilotAttributeSyntax" */
-&(nid_objs[438]),/* "pilotAttributeType" */
-&(nid_objs[479]),/* "pilotAttributeType27" */
-&(nid_objs[456]),/* "pilotDSA" */
-&(nid_objs[441]),/* "pilotGroups" */
-&(nid_objs[444]),/* "pilotObject" */
-&(nid_objs[440]),/* "pilotObjectClass" */
-&(nid_objs[455]),/* "pilotOrganization" */
-&(nid_objs[445]),/* "pilotPerson" */
-&(nid_objs[ 2]),/* "pkcs" */
-&(nid_objs[186]),/* "pkcs1" */
-&(nid_objs[27]),/* "pkcs3" */
-&(nid_objs[187]),/* "pkcs5" */
-&(nid_objs[20]),/* "pkcs7" */
-&(nid_objs[21]),/* "pkcs7-data" */
-&(nid_objs[25]),/* "pkcs7-digestData" */
-&(nid_objs[26]),/* "pkcs7-encryptedData" */
-&(nid_objs[23]),/* "pkcs7-envelopedData" */
-&(nid_objs[24]),/* "pkcs7-signedAndEnvelopedData" */
-&(nid_objs[22]),/* "pkcs7-signedData" */
-&(nid_objs[151]),/* "pkcs8ShroudedKeyBag" */
-&(nid_objs[47]),/* "pkcs9" */
-&(nid_objs[401]),/* "policyConstraints" */
-&(nid_objs[747]),/* "policyMappings" */
-&(nid_objs[661]),/* "postalCode" */
-&(nid_objs[683]),/* "ppBasis" */
-&(nid_objs[406]),/* "prime-field" */
-&(nid_objs[409]),/* "prime192v1" */
-&(nid_objs[410]),/* "prime192v2" */
-&(nid_objs[411]),/* "prime192v3" */
-&(nid_objs[412]),/* "prime239v1" */
-&(nid_objs[413]),/* "prime239v2" */
-&(nid_objs[414]),/* "prime239v3" */
-&(nid_objs[415]),/* "prime256v1" */
-&(nid_objs[385]),/* "private" */
-&(nid_objs[84]),/* "privateKeyUsagePeriod" */
-&(nid_objs[663]),/* "proxyCertInfo" */
-&(nid_objs[510]),/* "pseudonym" */
-&(nid_objs[435]),/* "pss" */
-&(nid_objs[286]),/* "qcStatements" */
-&(nid_objs[457]),/* "qualityLabelledData" */
-&(nid_objs[450]),/* "rFC822localPart" */
-&(nid_objs[400]),/* "role" */
-&(nid_objs[448]),/* "room" */
-&(nid_objs[463]),/* "roomNumber" */
-&(nid_objs[ 6]),/* "rsaEncryption" */
-&(nid_objs[644]),/* "rsaOAEPEncryptionSET" */
-&(nid_objs[377]),/* "rsaSignature" */
-&(nid_objs[ 1]),/* "rsadsi" */
-&(nid_objs[482]),/* "sOARecord" */
-&(nid_objs[155]),/* "safeContentsBag" */
-&(nid_objs[291]),/* "sbgp-autonomousSysNum" */
-&(nid_objs[290]),/* "sbgp-ipAddrBlock" */
-&(nid_objs[292]),/* "sbgp-routerIdentifier" */
-&(nid_objs[159]),/* "sdsiCertificate" */
-&(nid_objs[704]),/* "secp112r1" */
-&(nid_objs[705]),/* "secp112r2" */
-&(nid_objs[706]),/* "secp128r1" */
-&(nid_objs[707]),/* "secp128r2" */
-&(nid_objs[708]),/* "secp160k1" */
-&(nid_objs[709]),/* "secp160r1" */
-&(nid_objs[710]),/* "secp160r2" */
-&(nid_objs[711]),/* "secp192k1" */
-&(nid_objs[712]),/* "secp224k1" */
-&(nid_objs[713]),/* "secp224r1" */
-&(nid_objs[714]),/* "secp256k1" */
-&(nid_objs[715]),/* "secp384r1" */
-&(nid_objs[716]),/* "secp521r1" */
-&(nid_objs[154]),/* "secretBag" */
-&(nid_objs[474]),/* "secretary" */
-&(nid_objs[717]),/* "sect113r1" */
-&(nid_objs[718]),/* "sect113r2" */
-&(nid_objs[719]),/* "sect131r1" */
-&(nid_objs[720]),/* "sect131r2" */
-&(nid_objs[721]),/* "sect163k1" */
-&(nid_objs[722]),/* "sect163r1" */
-&(nid_objs[723]),/* "sect163r2" */
-&(nid_objs[724]),/* "sect193r1" */
-&(nid_objs[725]),/* "sect193r2" */
-&(nid_objs[726]),/* "sect233k1" */
-&(nid_objs[727]),/* "sect233r1" */
-&(nid_objs[728]),/* "sect239k1" */
-&(nid_objs[729]),/* "sect283k1" */
-&(nid_objs[730]),/* "sect283r1" */
-&(nid_objs[731]),/* "sect409k1" */
-&(nid_objs[732]),/* "sect409r1" */
-&(nid_objs[733]),/* "sect571k1" */
-&(nid_objs[734]),/* "sect571r1" */
-&(nid_objs[386]),/* "security" */
-&(nid_objs[394]),/* "selected-attribute-types" */
-&(nid_objs[105]),/* "serialNumber" */
-&(nid_objs[129]),/* "serverAuth" */
-&(nid_objs[371]),/* "serviceLocator" */
-&(nid_objs[625]),/* "set-addPolicy" */
-&(nid_objs[515]),/* "set-attr" */
-&(nid_objs[518]),/* "set-brand" */
-&(nid_objs[638]),/* "set-brand-AmericanExpress" */
-&(nid_objs[637]),/* "set-brand-Diners" */
-&(nid_objs[636]),/* "set-brand-IATA-ATA" */
-&(nid_objs[639]),/* "set-brand-JCB" */
-&(nid_objs[641]),/* "set-brand-MasterCard" */
-&(nid_objs[642]),/* "set-brand-Novus" */
-&(nid_objs[640]),/* "set-brand-Visa" */
-&(nid_objs[517]),/* "set-certExt" */
-&(nid_objs[513]),/* "set-ctype" */
-&(nid_objs[514]),/* "set-msgExt" */
-&(nid_objs[516]),/* "set-policy" */
-&(nid_objs[607]),/* "set-policy-root" */
-&(nid_objs[624]),/* "set-rootKeyThumb" */
-&(nid_objs[620]),/* "setAttr-Cert" */
-&(nid_objs[631]),/* "setAttr-GenCryptgrm" */
-&(nid_objs[623]),/* "setAttr-IssCap" */
-&(nid_objs[628]),/* "setAttr-IssCap-CVM" */
-&(nid_objs[630]),/* "setAttr-IssCap-Sig" */
-&(nid_objs[629]),/* "setAttr-IssCap-T2" */
-&(nid_objs[621]),/* "setAttr-PGWYcap" */
-&(nid_objs[635]),/* "setAttr-SecDevSig" */
-&(nid_objs[632]),/* "setAttr-T2Enc" */
-&(nid_objs[633]),/* "setAttr-T2cleartxt" */
-&(nid_objs[634]),/* "setAttr-TokICCsig" */
-&(nid_objs[627]),/* "setAttr-Token-B0Prime" */
-&(nid_objs[626]),/* "setAttr-Token-EMV" */
-&(nid_objs[622]),/* "setAttr-TokenType" */
-&(nid_objs[619]),/* "setCext-IssuerCapabilities" */
-&(nid_objs[615]),/* "setCext-PGWYcapabilities" */
-&(nid_objs[616]),/* "setCext-TokenIdentifier" */
-&(nid_objs[618]),/* "setCext-TokenType" */
-&(nid_objs[617]),/* "setCext-Track2Data" */
-&(nid_objs[611]),/* "setCext-cCertRequired" */
-&(nid_objs[609]),/* "setCext-certType" */
-&(nid_objs[608]),/* "setCext-hashedRoot" */
-&(nid_objs[610]),/* "setCext-merchData" */
-&(nid_objs[613]),/* "setCext-setExt" */
-&(nid_objs[614]),/* "setCext-setQualf" */
-&(nid_objs[612]),/* "setCext-tunneling" */
-&(nid_objs[540]),/* "setct-AcqCardCodeMsg" */
-&(nid_objs[576]),/* "setct-AcqCardCodeMsgTBE" */
-&(nid_objs[570]),/* "setct-AuthReqTBE" */
-&(nid_objs[534]),/* "setct-AuthReqTBS" */
-&(nid_objs[527]),/* "setct-AuthResBaggage" */
-&(nid_objs[571]),/* "setct-AuthResTBE" */
-&(nid_objs[572]),/* "setct-AuthResTBEX" */
-&(nid_objs[535]),/* "setct-AuthResTBS" */
-&(nid_objs[536]),/* "setct-AuthResTBSX" */
-&(nid_objs[528]),/* "setct-AuthRevReqBaggage" */
-&(nid_objs[577]),/* "setct-AuthRevReqTBE" */
-&(nid_objs[541]),/* "setct-AuthRevReqTBS" */
-&(nid_objs[529]),/* "setct-AuthRevResBaggage" */
-&(nid_objs[542]),/* "setct-AuthRevResData" */
-&(nid_objs[578]),/* "setct-AuthRevResTBE" */
-&(nid_objs[579]),/* "setct-AuthRevResTBEB" */
-&(nid_objs[543]),/* "setct-AuthRevResTBS" */
-&(nid_objs[573]),/* "setct-AuthTokenTBE" */
-&(nid_objs[537]),/* "setct-AuthTokenTBS" */
-&(nid_objs[600]),/* "setct-BCIDistributionTBS" */
-&(nid_objs[558]),/* "setct-BatchAdminReqData" */
-&(nid_objs[592]),/* "setct-BatchAdminReqTBE" */
-&(nid_objs[559]),/* "setct-BatchAdminResData" */
-&(nid_objs[593]),/* "setct-BatchAdminResTBE" */
-&(nid_objs[599]),/* "setct-CRLNotificationResTBS" */
-&(nid_objs[598]),/* "setct-CRLNotificationTBS" */
-&(nid_objs[580]),/* "setct-CapReqTBE" */
-&(nid_objs[581]),/* "setct-CapReqTBEX" */
-&(nid_objs[544]),/* "setct-CapReqTBS" */
-&(nid_objs[545]),/* "setct-CapReqTBSX" */
-&(nid_objs[546]),/* "setct-CapResData" */
-&(nid_objs[582]),/* "setct-CapResTBE" */
-&(nid_objs[583]),/* "setct-CapRevReqTBE" */
-&(nid_objs[584]),/* "setct-CapRevReqTBEX" */
-&(nid_objs[547]),/* "setct-CapRevReqTBS" */
-&(nid_objs[548]),/* "setct-CapRevReqTBSX" */
-&(nid_objs[549]),/* "setct-CapRevResData" */
-&(nid_objs[585]),/* "setct-CapRevResTBE" */
-&(nid_objs[538]),/* "setct-CapTokenData" */
-&(nid_objs[530]),/* "setct-CapTokenSeq" */
-&(nid_objs[574]),/* "setct-CapTokenTBE" */
-&(nid_objs[575]),/* "setct-CapTokenTBEX" */
-&(nid_objs[539]),/* "setct-CapTokenTBS" */
-&(nid_objs[560]),/* "setct-CardCInitResTBS" */
-&(nid_objs[566]),/* "setct-CertInqReqTBS" */
-&(nid_objs[563]),/* "setct-CertReqData" */
-&(nid_objs[595]),/* "setct-CertReqTBE" */
-&(nid_objs[596]),/* "setct-CertReqTBEX" */
-&(nid_objs[564]),/* "setct-CertReqTBS" */
-&(nid_objs[565]),/* "setct-CertResData" */
-&(nid_objs[597]),/* "setct-CertResTBE" */
-&(nid_objs[586]),/* "setct-CredReqTBE" */
-&(nid_objs[587]),/* "setct-CredReqTBEX" */
-&(nid_objs[550]),/* "setct-CredReqTBS" */
-&(nid_objs[551]),/* "setct-CredReqTBSX" */
-&(nid_objs[552]),/* "setct-CredResData" */
-&(nid_objs[588]),/* "setct-CredResTBE" */
-&(nid_objs[589]),/* "setct-CredRevReqTBE" */
-&(nid_objs[590]),/* "setct-CredRevReqTBEX" */
-&(nid_objs[553]),/* "setct-CredRevReqTBS" */
-&(nid_objs[554]),/* "setct-CredRevReqTBSX" */
-&(nid_objs[555]),/* "setct-CredRevResData" */
-&(nid_objs[591]),/* "setct-CredRevResTBE" */
-&(nid_objs[567]),/* "setct-ErrorTBS" */
-&(nid_objs[526]),/* "setct-HODInput" */
-&(nid_objs[561]),/* "setct-MeAqCInitResTBS" */
-&(nid_objs[522]),/* "setct-OIData" */
-&(nid_objs[519]),/* "setct-PANData" */
-&(nid_objs[521]),/* "setct-PANOnly" */
-&(nid_objs[520]),/* "setct-PANToken" */
-&(nid_objs[556]),/* "setct-PCertReqData" */
-&(nid_objs[557]),/* "setct-PCertResTBS" */
-&(nid_objs[523]),/* "setct-PI" */
-&(nid_objs[532]),/* "setct-PI-TBS" */
-&(nid_objs[524]),/* "setct-PIData" */
-&(nid_objs[525]),/* "setct-PIDataUnsigned" */
-&(nid_objs[568]),/* "setct-PIDualSignedTBE" */
-&(nid_objs[569]),/* "setct-PIUnsignedTBE" */
-&(nid_objs[531]),/* "setct-PInitResData" */
-&(nid_objs[533]),/* "setct-PResData" */
-&(nid_objs[594]),/* "setct-RegFormReqTBE" */
-&(nid_objs[562]),/* "setct-RegFormResTBS" */
-&(nid_objs[606]),/* "setext-cv" */
-&(nid_objs[601]),/* "setext-genCrypt" */
-&(nid_objs[602]),/* "setext-miAuth" */
-&(nid_objs[604]),/* "setext-pinAny" */
-&(nid_objs[603]),/* "setext-pinSecure" */
-&(nid_objs[605]),/* "setext-track2" */
-&(nid_objs[52]),/* "signingTime" */
-&(nid_objs[454]),/* "simpleSecurityObject" */
-&(nid_objs[496]),/* "singleLevelQuality" */
-&(nid_objs[387]),/* "snmpv2" */
-&(nid_objs[660]),/* "streetAddress" */
-&(nid_objs[85]),/* "subjectAltName" */
-&(nid_objs[769]),/* "subjectDirectoryAttributes" */
-&(nid_objs[398]),/* "subjectInfoAccess" */
-&(nid_objs[82]),/* "subjectKeyIdentifier" */
-&(nid_objs[498]),/* "subtreeMaximumQuality" */
-&(nid_objs[497]),/* "subtreeMinimumQuality" */
-&(nid_objs[402]),/* "targetInformation" */
-&(nid_objs[459]),/* "textEncodedORAddress" */
-&(nid_objs[293]),/* "textNotice" */
-&(nid_objs[133]),/* "timeStamping" */
-&(nid_objs[106]),/* "title" */
-&(nid_objs[682]),/* "tpBasis" */
-&(nid_objs[375]),/* "trustRoot" */
-&(nid_objs[436]),/* "ucl" */
-&(nid_objs[55]),/* "unstructuredAddress" */
-&(nid_objs[49]),/* "unstructuredName" */
-&(nid_objs[465]),/* "userClass" */
-&(nid_objs[373]),/* "valid" */
-&(nid_objs[678]),/* "wap" */
-&(nid_objs[679]),/* "wap-wsg" */
-&(nid_objs[735]),/* "wap-wsg-idm-ecid-wtls1" */
-&(nid_objs[743]),/* "wap-wsg-idm-ecid-wtls10" */
-&(nid_objs[744]),/* "wap-wsg-idm-ecid-wtls11" */
-&(nid_objs[745]),/* "wap-wsg-idm-ecid-wtls12" */
-&(nid_objs[736]),/* "wap-wsg-idm-ecid-wtls3" */
-&(nid_objs[737]),/* "wap-wsg-idm-ecid-wtls4" */
-&(nid_objs[738]),/* "wap-wsg-idm-ecid-wtls5" */
-&(nid_objs[739]),/* "wap-wsg-idm-ecid-wtls6" */
-&(nid_objs[740]),/* "wap-wsg-idm-ecid-wtls7" */
-&(nid_objs[741]),/* "wap-wsg-idm-ecid-wtls8" */
-&(nid_objs[742]),/* "wap-wsg-idm-ecid-wtls9" */
-&(nid_objs[503]),/* "x500UniqueIdentifier" */
-&(nid_objs[158]),/* "x509Certificate" */
-&(nid_objs[160]),/* "x509Crl" */
-};
-
-static ASN1_OBJECT *ln_objs[NUM_LN]={
-&(nid_objs[363]),/* "AD Time Stamping" */
-&(nid_objs[405]),/* "ANSI X9.62" */
-&(nid_objs[368]),/* "Acceptable OCSP Responses" */
-&(nid_objs[664]),/* "Any language" */
-&(nid_objs[177]),/* "Authority Information Access" */
-&(nid_objs[365]),/* "Basic OCSP Response" */
-&(nid_objs[285]),/* "Biometric Info" */
-&(nid_objs[179]),/* "CA Issuers" */
-&(nid_objs[131]),/* "Code Signing" */
-&(nid_objs[382]),/* "Directory" */
-&(nid_objs[392]),/* "Domain" */
-&(nid_objs[132]),/* "E-mail Protection" */
-&(nid_objs[389]),/* "Enterprises" */
-&(nid_objs[384]),/* "Experimental" */
-&(nid_objs[372]),/* "Extended OCSP Status" */
-&(nid_objs[172]),/* "Extension Request" */
-&(nid_objs[432]),/* "Hold Instruction Call Issuer" */
-&(nid_objs[430]),/* "Hold Instruction Code" */
-&(nid_objs[431]),/* "Hold Instruction None" */
-&(nid_objs[433]),/* "Hold Instruction Reject" */
-&(nid_objs[634]),/* "ICC or token signature" */
-&(nid_objs[294]),/* "IPSec End System" */
-&(nid_objs[295]),/* "IPSec Tunnel" */
-&(nid_objs[296]),/* "IPSec User" */
-&(nid_objs[182]),/* "ISO Member Body" */
-&(nid_objs[183]),/* "ISO US Member Body" */
-&(nid_objs[667]),/* "Independent" */
-&(nid_objs[665]),/* "Inherit all" */
-&(nid_objs[647]),/* "International Organizations" */
-&(nid_objs[142]),/* "Invalidity Date" */
-&(nid_objs[504]),/* "MIME MHS" */
-&(nid_objs[388]),/* "Mail" */
-&(nid_objs[383]),/* "Management" */
-&(nid_objs[417]),/* "Microsoft CSP Name" */
-&(nid_objs[135]),/* "Microsoft Commercial Code Signing" */
-&(nid_objs[138]),/* "Microsoft Encrypted File System" */
-&(nid_objs[171]),/* "Microsoft Extension Request" */
-&(nid_objs[134]),/* "Microsoft Individual Code Signing" */
-&(nid_objs[137]),/* "Microsoft Server Gated Crypto" */
-&(nid_objs[648]),/* "Microsoft Smartcardlogin" */
-&(nid_objs[136]),/* "Microsoft Trust List Signing" */
-&(nid_objs[649]),/* "Microsoft Universal Principal Name" */
-&(nid_objs[393]),/* "NULL" */
-&(nid_objs[404]),/* "NULL" */
-&(nid_objs[72]),/* "Netscape Base Url" */
-&(nid_objs[76]),/* "Netscape CA Policy Url" */
-&(nid_objs[74]),/* "Netscape CA Revocation Url" */
-&(nid_objs[71]),/* "Netscape Cert Type" */
-&(nid_objs[58]),/* "Netscape Certificate Extension" */
-&(nid_objs[79]),/* "Netscape Certificate Sequence" */
-&(nid_objs[78]),/* "Netscape Comment" */
-&(nid_objs[57]),/* "Netscape Communications Corp." */
-&(nid_objs[59]),/* "Netscape Data Type" */
-&(nid_objs[75]),/* "Netscape Renewal Url" */
-&(nid_objs[73]),/* "Netscape Revocation Url" */
-&(nid_objs[77]),/* "Netscape SSL Server Name" */
-&(nid_objs[139]),/* "Netscape Server Gated Crypto" */
-&(nid_objs[178]),/* "OCSP" */
-&(nid_objs[370]),/* "OCSP Archive Cutoff" */
-&(nid_objs[367]),/* "OCSP CRL ID" */
-&(nid_objs[369]),/* "OCSP No Check" */
-&(nid_objs[366]),/* "OCSP Nonce" */
-&(nid_objs[371]),/* "OCSP Service Locator" */
-&(nid_objs[180]),/* "OCSP Signing" */
-&(nid_objs[161]),/* "PBES2" */
-&(nid_objs[69]),/* "PBKDF2" */
-&(nid_objs[162]),/* "PBMAC1" */
-&(nid_objs[127]),/* "PKIX" */
-&(nid_objs[164]),/* "Policy Qualifier CPS" */
-&(nid_objs[165]),/* "Policy Qualifier User Notice" */
-&(nid_objs[385]),/* "Private" */
-&(nid_objs[663]),/* "Proxy Certificate Information" */
-&(nid_objs[ 1]),/* "RSA Data Security, Inc." */
-&(nid_objs[ 2]),/* "RSA Data Security, Inc. PKCS" */
-&(nid_objs[188]),/* "S/MIME" */
-&(nid_objs[167]),/* "S/MIME Capabilities" */
-&(nid_objs[387]),/* "SNMPv2" */
-&(nid_objs[512]),/* "Secure Electronic Transactions" */
-&(nid_objs[386]),/* "Security" */
-&(nid_objs[394]),/* "Selected Attribute Types" */
-&(nid_objs[143]),/* "Strong Extranet ID" */
-&(nid_objs[398]),/* "Subject Information Access" */
-&(nid_objs[130]),/* "TLS Web Client Authentication" */
-&(nid_objs[129]),/* "TLS Web Server Authentication" */
-&(nid_objs[133]),/* "Time Stamping" */
-&(nid_objs[375]),/* "Trust Root" */
-&(nid_objs[12]),/* "X509" */
-&(nid_objs[402]),/* "X509v3 AC Targeting" */
-&(nid_objs[746]),/* "X509v3 Any Policy" */
-&(nid_objs[90]),/* "X509v3 Authority Key Identifier" */
-&(nid_objs[87]),/* "X509v3 Basic Constraints" */
-&(nid_objs[103]),/* "X509v3 CRL Distribution Points" */
-&(nid_objs[88]),/* "X509v3 CRL Number" */
-&(nid_objs[141]),/* "X509v3 CRL Reason Code" */
-&(nid_objs[771]),/* "X509v3 Certificate Issuer" */
-&(nid_objs[89]),/* "X509v3 Certificate Policies" */
-&(nid_objs[140]),/* "X509v3 Delta CRL Indicator" */
-&(nid_objs[126]),/* "X509v3 Extended Key Usage" */
-&(nid_objs[748]),/* "X509v3 Inhibit Any Policy" */
-&(nid_objs[86]),/* "X509v3 Issuer Alternative Name" */
-&(nid_objs[770]),/* "X509v3 Issuing Distrubution Point" */
-&(nid_objs[83]),/* "X509v3 Key Usage" */
-&(nid_objs[666]),/* "X509v3 Name Constraints" */
-&(nid_objs[403]),/* "X509v3 No Revocation Available" */
-&(nid_objs[401]),/* "X509v3 Policy Constraints" */
-&(nid_objs[747]),/* "X509v3 Policy Mappings" */
-&(nid_objs[84]),/* "X509v3 Private Key Usage Period" */
-&(nid_objs[85]),/* "X509v3 Subject Alternative Name" */
-&(nid_objs[769]),/* "X509v3 Subject Directory Attributes" */
-&(nid_objs[82]),/* "X509v3 Subject Key Identifier" */
-&(nid_objs[184]),/* "X9.57" */
-&(nid_objs[185]),/* "X9.57 CM ?" */
-&(nid_objs[478]),/* "aRecord" */
-&(nid_objs[289]),/* "aaControls" */
-&(nid_objs[287]),/* "ac-auditEntity" */
-&(nid_objs[397]),/* "ac-proxying" */
-&(nid_objs[288]),/* "ac-targeting" */
-&(nid_objs[446]),/* "account" */
-&(nid_objs[364]),/* "ad dvcs" */
-&(nid_objs[606]),/* "additional verification" */
-&(nid_objs[419]),/* "aes-128-cbc" */
-&(nid_objs[421]),/* "aes-128-cfb" */
-&(nid_objs[650]),/* "aes-128-cfb1" */
-&(nid_objs[653]),/* "aes-128-cfb8" */
-&(nid_objs[418]),/* "aes-128-ecb" */
-&(nid_objs[420]),/* "aes-128-ofb" */
-&(nid_objs[423]),/* "aes-192-cbc" */
-&(nid_objs[425]),/* "aes-192-cfb" */
-&(nid_objs[651]),/* "aes-192-cfb1" */
-&(nid_objs[654]),/* "aes-192-cfb8" */
-&(nid_objs[422]),/* "aes-192-ecb" */
-&(nid_objs[424]),/* "aes-192-ofb" */
-&(nid_objs[427]),/* "aes-256-cbc" */
-&(nid_objs[429]),/* "aes-256-cfb" */
-&(nid_objs[652]),/* "aes-256-cfb1" */
-&(nid_objs[655]),/* "aes-256-cfb8" */
-&(nid_objs[426]),/* "aes-256-ecb" */
-&(nid_objs[428]),/* "aes-256-ofb" */
-&(nid_objs[376]),/* "algorithm" */
-&(nid_objs[484]),/* "associatedDomain" */
-&(nid_objs[485]),/* "associatedName" */
-&(nid_objs[501]),/* "audio" */
-&(nid_objs[91]),/* "bf-cbc" */
-&(nid_objs[93]),/* "bf-cfb" */
-&(nid_objs[92]),/* "bf-ecb" */
-&(nid_objs[94]),/* "bf-ofb" */
-&(nid_objs[494]),/* "buildingName" */
-&(nid_objs[691]),/* "c2onb191v4" */
-&(nid_objs[692]),/* "c2onb191v5" */
-&(nid_objs[697]),/* "c2onb239v4" */
-&(nid_objs[698]),/* "c2onb239v5" */
-&(nid_objs[684]),/* "c2pnb163v1" */
-&(nid_objs[685]),/* "c2pnb163v2" */
-&(nid_objs[686]),/* "c2pnb163v3" */
-&(nid_objs[687]),/* "c2pnb176v1" */
-&(nid_objs[693]),/* "c2pnb208w1" */
-&(nid_objs[699]),/* "c2pnb272w1" */
-&(nid_objs[700]),/* "c2pnb304w1" */
-&(nid_objs[702]),/* "c2pnb368w1" */
-&(nid_objs[688]),/* "c2tnb191v1" */
-&(nid_objs[689]),/* "c2tnb191v2" */
-&(nid_objs[690]),/* "c2tnb191v3" */
-&(nid_objs[694]),/* "c2tnb239v1" */
-&(nid_objs[695]),/* "c2tnb239v2" */
-&(nid_objs[696]),/* "c2tnb239v3" */
-&(nid_objs[701]),/* "c2tnb359v1" */
-&(nid_objs[703]),/* "c2tnb431r1" */
-&(nid_objs[483]),/* "cNAMERecord" */
-&(nid_objs[751]),/* "camellia-128-cbc" */
-&(nid_objs[757]),/* "camellia-128-cfb" */
-&(nid_objs[760]),/* "camellia-128-cfb1" */
-&(nid_objs[763]),/* "camellia-128-cfb8" */
-&(nid_objs[754]),/* "camellia-128-ecb" */
-&(nid_objs[766]),/* "camellia-128-ofb" */
-&(nid_objs[752]),/* "camellia-192-cbc" */
-&(nid_objs[758]),/* "camellia-192-cfb" */
-&(nid_objs[761]),/* "camellia-192-cfb1" */
-&(nid_objs[764]),/* "camellia-192-cfb8" */
-&(nid_objs[755]),/* "camellia-192-ecb" */
-&(nid_objs[767]),/* "camellia-192-ofb" */
-&(nid_objs[753]),/* "camellia-256-cbc" */
-&(nid_objs[759]),/* "camellia-256-cfb" */
-&(nid_objs[762]),/* "camellia-256-cfb1" */
-&(nid_objs[765]),/* "camellia-256-cfb8" */
-&(nid_objs[756]),/* "camellia-256-ecb" */
-&(nid_objs[768]),/* "camellia-256-ofb" */
-&(nid_objs[443]),/* "caseIgnoreIA5StringSyntax" */
-&(nid_objs[108]),/* "cast5-cbc" */
-&(nid_objs[110]),/* "cast5-cfb" */
-&(nid_objs[109]),/* "cast5-ecb" */
-&(nid_objs[111]),/* "cast5-ofb" */
-&(nid_objs[152]),/* "certBag" */
-&(nid_objs[677]),/* "certicom-arc" */
-&(nid_objs[517]),/* "certificate extensions" */
-&(nid_objs[54]),/* "challengePassword" */
-&(nid_objs[407]),/* "characteristic-two-field" */
-&(nid_objs[395]),/* "clearance" */
-&(nid_objs[633]),/* "cleartext track 2" */
-&(nid_objs[13]),/* "commonName" */
-&(nid_objs[513]),/* "content types" */
-&(nid_objs[50]),/* "contentType" */
-&(nid_objs[53]),/* "countersignature" */
-&(nid_objs[14]),/* "countryName" */
-&(nid_objs[153]),/* "crlBag" */
-&(nid_objs[500]),/* "dITRedirect" */
-&(nid_objs[451]),/* "dNSDomain" */
-&(nid_objs[495]),/* "dSAQuality" */
-&(nid_objs[434]),/* "data" */
-&(nid_objs[390]),/* "dcObject" */
-&(nid_objs[31]),/* "des-cbc" */
-&(nid_objs[643]),/* "des-cdmf" */
-&(nid_objs[30]),/* "des-cfb" */
-&(nid_objs[656]),/* "des-cfb1" */
-&(nid_objs[657]),/* "des-cfb8" */
-&(nid_objs[29]),/* "des-ecb" */
-&(nid_objs[32]),/* "des-ede" */
-&(nid_objs[43]),/* "des-ede-cbc" */
-&(nid_objs[60]),/* "des-ede-cfb" */
-&(nid_objs[62]),/* "des-ede-ofb" */
-&(nid_objs[33]),/* "des-ede3" */
-&(nid_objs[44]),/* "des-ede3-cbc" */
-&(nid_objs[61]),/* "des-ede3-cfb" */
-&(nid_objs[658]),/* "des-ede3-cfb1" */
-&(nid_objs[659]),/* "des-ede3-cfb8" */
-&(nid_objs[63]),/* "des-ede3-ofb" */
-&(nid_objs[45]),/* "des-ofb" */
-&(nid_objs[107]),/* "description" */
-&(nid_objs[80]),/* "desx-cbc" */
-&(nid_objs[28]),/* "dhKeyAgreement" */
-&(nid_objs[11]),/* "directory services (X.500)" */
-&(nid_objs[378]),/* "directory services - algorithms" */
-&(nid_objs[174]),/* "dnQualifier" */
-&(nid_objs[447]),/* "document" */
-&(nid_objs[471]),/* "documentAuthor" */
-&(nid_objs[468]),/* "documentIdentifier" */
-&(nid_objs[472]),/* "documentLocation" */
-&(nid_objs[502]),/* "documentPublisher" */
-&(nid_objs[449]),/* "documentSeries" */
-&(nid_objs[469]),/* "documentTitle" */
-&(nid_objs[470]),/* "documentVersion" */
-&(nid_objs[380]),/* "dod" */
-&(nid_objs[391]),/* "domainComponent" */
-&(nid_objs[452]),/* "domainRelatedObject" */
-&(nid_objs[116]),/* "dsaEncryption" */
-&(nid_objs[67]),/* "dsaEncryption-old" */
-&(nid_objs[66]),/* "dsaWithSHA" */
-&(nid_objs[113]),/* "dsaWithSHA1" */
-&(nid_objs[70]),/* "dsaWithSHA1-old" */
-&(nid_objs[297]),/* "dvcs" */
-&(nid_objs[416]),/* "ecdsa-with-SHA1" */
-&(nid_objs[48]),/* "emailAddress" */
-&(nid_objs[632]),/* "encrypted track 2" */
-&(nid_objs[56]),/* "extendedCertificateAttributes" */
-&(nid_objs[462]),/* "favouriteDrink" */
-&(nid_objs[453]),/* "friendlyCountry" */
-&(nid_objs[490]),/* "friendlyCountryName" */
-&(nid_objs[156]),/* "friendlyName" */
-&(nid_objs[631]),/* "generate cryptogram" */
-&(nid_objs[509]),/* "generationQualifier" */
-&(nid_objs[601]),/* "generic cryptogram" */
-&(nid_objs[99]),/* "givenName" */
-&(nid_objs[163]),/* "hmacWithSHA1" */
-&(nid_objs[486]),/* "homePostalAddress" */
-&(nid_objs[473]),/* "homeTelephoneNumber" */
-&(nid_objs[466]),/* "host" */
-&(nid_objs[442]),/* "iA5StringSyntax" */
-&(nid_objs[381]),/* "iana" */
-&(nid_objs[266]),/* "id-aca" */
-&(nid_objs[355]),/* "id-aca-accessIdentity" */
-&(nid_objs[354]),/* "id-aca-authenticationInfo" */
-&(nid_objs[356]),/* "id-aca-chargingIdentity" */
-&(nid_objs[399]),/* "id-aca-encAttrs" */
-&(nid_objs[357]),/* "id-aca-group" */
-&(nid_objs[358]),/* "id-aca-role" */
-&(nid_objs[176]),/* "id-ad" */
-&(nid_objs[262]),/* "id-alg" */
-&(nid_objs[323]),/* "id-alg-des40" */
-&(nid_objs[326]),/* "id-alg-dh-pop" */
-&(nid_objs[325]),/* "id-alg-dh-sig-hmac-sha1" */
-&(nid_objs[324]),/* "id-alg-noSignature" */
-&(nid_objs[268]),/* "id-cct" */
-&(nid_objs[361]),/* "id-cct-PKIData" */
-&(nid_objs[362]),/* "id-cct-PKIResponse" */
-&(nid_objs[360]),/* "id-cct-crs" */
-&(nid_objs[81]),/* "id-ce" */
-&(nid_objs[680]),/* "id-characteristic-two-basis" */
-&(nid_objs[263]),/* "id-cmc" */
-&(nid_objs[334]),/* "id-cmc-addExtensions" */
-&(nid_objs[346]),/* "id-cmc-confirmCertAcceptance" */
-&(nid_objs[330]),/* "id-cmc-dataReturn" */
-&(nid_objs[336]),/* "id-cmc-decryptedPOP" */
-&(nid_objs[335]),/* "id-cmc-encryptedPOP" */
-&(nid_objs[339]),/* "id-cmc-getCRL" */
-&(nid_objs[338]),/* "id-cmc-getCert" */
-&(nid_objs[328]),/* "id-cmc-identification" */
-&(nid_objs[329]),/* "id-cmc-identityProof" */
-&(nid_objs[337]),/* "id-cmc-lraPOPWitness" */
-&(nid_objs[344]),/* "id-cmc-popLinkRandom" */
-&(nid_objs[345]),/* "id-cmc-popLinkWitness" */
-&(nid_objs[343]),/* "id-cmc-queryPending" */
-&(nid_objs[333]),/* "id-cmc-recipientNonce" */
-&(nid_objs[341]),/* "id-cmc-regInfo" */
-&(nid_objs[342]),/* "id-cmc-responseInfo" */
-&(nid_objs[340]),/* "id-cmc-revokeRequest" */
-&(nid_objs[332]),/* "id-cmc-senderNonce" */
-&(nid_objs[327]),/* "id-cmc-statusInfo" */
-&(nid_objs[331]),/* "id-cmc-transactionId" */
-&(nid_objs[408]),/* "id-ecPublicKey" */
-&(nid_objs[508]),/* "id-hex-multipart-message" */
-&(nid_objs[507]),/* "id-hex-partial-message" */
-&(nid_objs[260]),/* "id-it" */
-&(nid_objs[302]),/* "id-it-caKeyUpdateInfo" */
-&(nid_objs[298]),/* "id-it-caProtEncCert" */
-&(nid_objs[311]),/* "id-it-confirmWaitTime" */
-&(nid_objs[303]),/* "id-it-currentCRL" */
-&(nid_objs[300]),/* "id-it-encKeyPairTypes" */
-&(nid_objs[310]),/* "id-it-implicitConfirm" */
-&(nid_objs[308]),/* "id-it-keyPairParamRep" */
-&(nid_objs[307]),/* "id-it-keyPairParamReq" */
-&(nid_objs[312]),/* "id-it-origPKIMessage" */
-&(nid_objs[301]),/* "id-it-preferredSymmAlg" */
-&(nid_objs[309]),/* "id-it-revPassphrase" */
-&(nid_objs[299]),/* "id-it-signKeyPairTypes" */
-&(nid_objs[305]),/* "id-it-subscriptionRequest" */
-&(nid_objs[306]),/* "id-it-subscriptionResponse" */
-&(nid_objs[304]),/* "id-it-unsupportedOIDs" */
-&(nid_objs[128]),/* "id-kp" */
-&(nid_objs[280]),/* "id-mod-attribute-cert" */
-&(nid_objs[274]),/* "id-mod-cmc" */
-&(nid_objs[277]),/* "id-mod-cmp" */
-&(nid_objs[284]),/* "id-mod-cmp2000" */
-&(nid_objs[273]),/* "id-mod-crmf" */
-&(nid_objs[283]),/* "id-mod-dvcs" */
-&(nid_objs[275]),/* "id-mod-kea-profile-88" */
-&(nid_objs[276]),/* "id-mod-kea-profile-93" */
-&(nid_objs[282]),/* "id-mod-ocsp" */
-&(nid_objs[278]),/* "id-mod-qualified-cert-88" */
-&(nid_objs[279]),/* "id-mod-qualified-cert-93" */
-&(nid_objs[281]),/* "id-mod-timestamp-protocol" */
-&(nid_objs[264]),/* "id-on" */
-&(nid_objs[347]),/* "id-on-personalData" */
-&(nid_objs[265]),/* "id-pda" */
-&(nid_objs[352]),/* "id-pda-countryOfCitizenship" */
-&(nid_objs[353]),/* "id-pda-countryOfResidence" */
-&(nid_objs[348]),/* "id-pda-dateOfBirth" */
-&(nid_objs[351]),/* "id-pda-gender" */
-&(nid_objs[349]),/* "id-pda-placeOfBirth" */
-&(nid_objs[175]),/* "id-pe" */
-&(nid_objs[261]),/* "id-pkip" */
-&(nid_objs[258]),/* "id-pkix-mod" */
-&(nid_objs[269]),/* "id-pkix1-explicit-88" */
-&(nid_objs[271]),/* "id-pkix1-explicit-93" */
-&(nid_objs[270]),/* "id-pkix1-implicit-88" */
-&(nid_objs[272]),/* "id-pkix1-implicit-93" */
-&(nid_objs[662]),/* "id-ppl" */
-&(nid_objs[267]),/* "id-qcs" */
-&(nid_objs[359]),/* "id-qcs-pkixQCSyntax-v1" */
-&(nid_objs[259]),/* "id-qt" */
-&(nid_objs[313]),/* "id-regCtrl" */
-&(nid_objs[316]),/* "id-regCtrl-authenticator" */
-&(nid_objs[319]),/* "id-regCtrl-oldCertID" */
-&(nid_objs[318]),/* "id-regCtrl-pkiArchiveOptions" */
-&(nid_objs[317]),/* "id-regCtrl-pkiPublicationInfo" */
-&(nid_objs[320]),/* "id-regCtrl-protocolEncrKey" */
-&(nid_objs[315]),/* "id-regCtrl-regToken" */
-&(nid_objs[314]),/* "id-regInfo" */
-&(nid_objs[322]),/* "id-regInfo-certReq" */
-&(nid_objs[321]),/* "id-regInfo-utf8Pairs" */
-&(nid_objs[191]),/* "id-smime-aa" */
-&(nid_objs[215]),/* "id-smime-aa-contentHint" */
-&(nid_objs[218]),/* "id-smime-aa-contentIdentifier" */
-&(nid_objs[221]),/* "id-smime-aa-contentReference" */
-&(nid_objs[240]),/* "id-smime-aa-dvcs-dvc" */
-&(nid_objs[217]),/* "id-smime-aa-encapContentType" */
-&(nid_objs[222]),/* "id-smime-aa-encrypKeyPref" */
-&(nid_objs[220]),/* "id-smime-aa-equivalentLabels" */
-&(nid_objs[232]),/* "id-smime-aa-ets-CertificateRefs" */
-&(nid_objs[233]),/* "id-smime-aa-ets-RevocationRefs" */
-&(nid_objs[238]),/* "id-smime-aa-ets-archiveTimeStamp" */
-&(nid_objs[237]),/* "id-smime-aa-ets-certCRLTimestamp" */
-&(nid_objs[234]),/* "id-smime-aa-ets-certValues" */
-&(nid_objs[227]),/* "id-smime-aa-ets-commitmentType" */
-&(nid_objs[231]),/* "id-smime-aa-ets-contentTimestamp" */
-&(nid_objs[236]),/* "id-smime-aa-ets-escTimeStamp" */
-&(nid_objs[230]),/* "id-smime-aa-ets-otherSigCert" */
-&(nid_objs[235]),/* "id-smime-aa-ets-revocationValues" */
-&(nid_objs[226]),/* "id-smime-aa-ets-sigPolicyId" */
-&(nid_objs[229]),/* "id-smime-aa-ets-signerAttr" */
-&(nid_objs[228]),/* "id-smime-aa-ets-signerLocation" */
-&(nid_objs[219]),/* "id-smime-aa-macValue" */
-&(nid_objs[214]),/* "id-smime-aa-mlExpandHistory" */
-&(nid_objs[216]),/* "id-smime-aa-msgSigDigest" */
-&(nid_objs[212]),/* "id-smime-aa-receiptRequest" */
-&(nid_objs[213]),/* "id-smime-aa-securityLabel" */
-&(nid_objs[239]),/* "id-smime-aa-signatureType" */
-&(nid_objs[223]),/* "id-smime-aa-signingCertificate" */
-&(nid_objs[224]),/* "id-smime-aa-smimeEncryptCerts" */
-&(nid_objs[225]),/* "id-smime-aa-timeStampToken" */
-&(nid_objs[192]),/* "id-smime-alg" */
-&(nid_objs[243]),/* "id-smime-alg-3DESwrap" */
-&(nid_objs[246]),/* "id-smime-alg-CMS3DESwrap" */
-&(nid_objs[247]),/* "id-smime-alg-CMSRC2wrap" */
-&(nid_objs[245]),/* "id-smime-alg-ESDH" */
-&(nid_objs[241]),/* "id-smime-alg-ESDHwith3DES" */
-&(nid_objs[242]),/* "id-smime-alg-ESDHwithRC2" */
-&(nid_objs[244]),/* "id-smime-alg-RC2wrap" */
-&(nid_objs[193]),/* "id-smime-cd" */
-&(nid_objs[248]),/* "id-smime-cd-ldap" */
-&(nid_objs[190]),/* "id-smime-ct" */
-&(nid_objs[210]),/* "id-smime-ct-DVCSRequestData" */
-&(nid_objs[211]),/* "id-smime-ct-DVCSResponseData" */
-&(nid_objs[208]),/* "id-smime-ct-TDTInfo" */
-&(nid_objs[207]),/* "id-smime-ct-TSTInfo" */
-&(nid_objs[205]),/* "id-smime-ct-authData" */
-&(nid_objs[209]),/* "id-smime-ct-contentInfo" */
-&(nid_objs[206]),/* "id-smime-ct-publishCert" */
-&(nid_objs[204]),/* "id-smime-ct-receipt" */
-&(nid_objs[195]),/* "id-smime-cti" */
-&(nid_objs[255]),/* "id-smime-cti-ets-proofOfApproval" */
-&(nid_objs[256]),/* "id-smime-cti-ets-proofOfCreation" */
-&(nid_objs[253]),/* "id-smime-cti-ets-proofOfDelivery" */
-&(nid_objs[251]),/* "id-smime-cti-ets-proofOfOrigin" */
-&(nid_objs[252]),/* "id-smime-cti-ets-proofOfReceipt" */
-&(nid_objs[254]),/* "id-smime-cti-ets-proofOfSender" */
-&(nid_objs[189]),/* "id-smime-mod" */
-&(nid_objs[196]),/* "id-smime-mod-cms" */
-&(nid_objs[197]),/* "id-smime-mod-ess" */
-&(nid_objs[202]),/* "id-smime-mod-ets-eSigPolicy-88" */
-&(nid_objs[203]),/* "id-smime-mod-ets-eSigPolicy-97" */
-&(nid_objs[200]),/* "id-smime-mod-ets-eSignature-88" */
-&(nid_objs[201]),/* "id-smime-mod-ets-eSignature-97" */
-&(nid_objs[199]),/* "id-smime-mod-msg-v3" */
-&(nid_objs[198]),/* "id-smime-mod-oid" */
-&(nid_objs[194]),/* "id-smime-spq" */
-&(nid_objs[250]),/* "id-smime-spq-ets-sqt-unotice" */
-&(nid_objs[249]),/* "id-smime-spq-ets-sqt-uri" */
-&(nid_objs[34]),/* "idea-cbc" */
-&(nid_objs[35]),/* "idea-cfb" */
-&(nid_objs[36]),/* "idea-ecb" */
-&(nid_objs[46]),/* "idea-ofb" */
-&(nid_objs[676]),/* "identified-organization" */
-&(nid_objs[461]),/* "info" */
-&(nid_objs[101]),/* "initials" */
-&(nid_objs[749]),/* "ipsec3" */
-&(nid_objs[750]),/* "ipsec4" */
-&(nid_objs[181]),/* "iso" */
-&(nid_objs[623]),/* "issuer capabilities" */
-&(nid_objs[645]),/* "itu-t" */
-&(nid_objs[492]),/* "janetMailbox" */
-&(nid_objs[646]),/* "joint-iso-itu-t" */
-&(nid_objs[150]),/* "keyBag" */
-&(nid_objs[477]),/* "lastModifiedBy" */
-&(nid_objs[476]),/* "lastModifiedTime" */
-&(nid_objs[157]),/* "localKeyID" */
-&(nid_objs[15]),/* "localityName" */
-&(nid_objs[480]),/* "mXRecord" */
-&(nid_objs[493]),/* "mailPreferenceOption" */
-&(nid_objs[467]),/* "manager" */
-&(nid_objs[ 3]),/* "md2" */
-&(nid_objs[ 7]),/* "md2WithRSAEncryption" */
-&(nid_objs[257]),/* "md4" */
-&(nid_objs[396]),/* "md4WithRSAEncryption" */
-&(nid_objs[ 4]),/* "md5" */
-&(nid_objs[114]),/* "md5-sha1" */
-&(nid_objs[104]),/* "md5WithRSA" */
-&(nid_objs[ 8]),/* "md5WithRSAEncryption" */
-&(nid_objs[95]),/* "mdc2" */
-&(nid_objs[96]),/* "mdc2WithRSA" */
-&(nid_objs[602]),/* "merchant initiated auth" */
-&(nid_objs[514]),/* "message extensions" */
-&(nid_objs[51]),/* "messageDigest" */
-&(nid_objs[506]),/* "mime-mhs-bodies" */
-&(nid_objs[505]),/* "mime-mhs-headings" */
-&(nid_objs[488]),/* "mobileTelephoneNumber" */
-&(nid_objs[481]),/* "nSRecord" */
-&(nid_objs[173]),/* "name" */
-&(nid_objs[681]),/* "onBasis" */
-&(nid_objs[379]),/* "org" */
-&(nid_objs[17]),/* "organizationName" */
-&(nid_objs[491]),/* "organizationalStatus" */
-&(nid_objs[18]),/* "organizationalUnitName" */
-&(nid_objs[475]),/* "otherMailbox" */
-&(nid_objs[489]),/* "pagerTelephoneNumber" */
-&(nid_objs[374]),/* "path" */
-&(nid_objs[621]),/* "payment gateway capabilities" */
-&(nid_objs[ 9]),/* "pbeWithMD2AndDES-CBC" */
-&(nid_objs[168]),/* "pbeWithMD2AndRC2-CBC" */
-&(nid_objs[112]),/* "pbeWithMD5AndCast5CBC" */
-&(nid_objs[10]),/* "pbeWithMD5AndDES-CBC" */
-&(nid_objs[169]),/* "pbeWithMD5AndRC2-CBC" */
-&(nid_objs[148]),/* "pbeWithSHA1And128BitRC2-CBC" */
-&(nid_objs[144]),/* "pbeWithSHA1And128BitRC4" */
-&(nid_objs[147]),/* "pbeWithSHA1And2-KeyTripleDES-CBC" */
-&(nid_objs[146]),/* "pbeWithSHA1And3-KeyTripleDES-CBC" */
-&(nid_objs[149]),/* "pbeWithSHA1And40BitRC2-CBC" */
-&(nid_objs[145]),/* "pbeWithSHA1And40BitRC4" */
-&(nid_objs[170]),/* "pbeWithSHA1AndDES-CBC" */
-&(nid_objs[68]),/* "pbeWithSHA1AndRC2-CBC" */
-&(nid_objs[499]),/* "personalSignature" */
-&(nid_objs[487]),/* "personalTitle" */
-&(nid_objs[464]),/* "photo" */
-&(nid_objs[437]),/* "pilot" */
-&(nid_objs[439]),/* "pilotAttributeSyntax" */
-&(nid_objs[438]),/* "pilotAttributeType" */
-&(nid_objs[479]),/* "pilotAttributeType27" */
-&(nid_objs[456]),/* "pilotDSA" */
-&(nid_objs[441]),/* "pilotGroups" */
-&(nid_objs[444]),/* "pilotObject" */
-&(nid_objs[440]),/* "pilotObjectClass" */
-&(nid_objs[455]),/* "pilotOrganization" */
-&(nid_objs[445]),/* "pilotPerson" */
-&(nid_objs[186]),/* "pkcs1" */
-&(nid_objs[27]),/* "pkcs3" */
-&(nid_objs[187]),/* "pkcs5" */
-&(nid_objs[20]),/* "pkcs7" */
-&(nid_objs[21]),/* "pkcs7-data" */
-&(nid_objs[25]),/* "pkcs7-digestData" */
-&(nid_objs[26]),/* "pkcs7-encryptedData" */
-&(nid_objs[23]),/* "pkcs7-envelopedData" */
-&(nid_objs[24]),/* "pkcs7-signedAndEnvelopedData" */
-&(nid_objs[22]),/* "pkcs7-signedData" */
-&(nid_objs[151]),/* "pkcs8ShroudedKeyBag" */
-&(nid_objs[47]),/* "pkcs9" */
-&(nid_objs[661]),/* "postalCode" */
-&(nid_objs[683]),/* "ppBasis" */
-&(nid_objs[406]),/* "prime-field" */
-&(nid_objs[409]),/* "prime192v1" */
-&(nid_objs[410]),/* "prime192v2" */
-&(nid_objs[411]),/* "prime192v3" */
-&(nid_objs[412]),/* "prime239v1" */
-&(nid_objs[413]),/* "prime239v2" */
-&(nid_objs[414]),/* "prime239v3" */
-&(nid_objs[415]),/* "prime256v1" */
-&(nid_objs[510]),/* "pseudonym" */
-&(nid_objs[435]),/* "pss" */
-&(nid_objs[286]),/* "qcStatements" */
-&(nid_objs[457]),/* "qualityLabelledData" */
-&(nid_objs[450]),/* "rFC822localPart" */
-&(nid_objs[98]),/* "rc2-40-cbc" */
-&(nid_objs[166]),/* "rc2-64-cbc" */
-&(nid_objs[37]),/* "rc2-cbc" */
-&(nid_objs[39]),/* "rc2-cfb" */
-&(nid_objs[38]),/* "rc2-ecb" */
-&(nid_objs[40]),/* "rc2-ofb" */
-&(nid_objs[ 5]),/* "rc4" */
-&(nid_objs[97]),/* "rc4-40" */
-&(nid_objs[120]),/* "rc5-cbc" */
-&(nid_objs[122]),/* "rc5-cfb" */
-&(nid_objs[121]),/* "rc5-ecb" */
-&(nid_objs[123]),/* "rc5-ofb" */
-&(nid_objs[460]),/* "rfc822Mailbox" */
-&(nid_objs[117]),/* "ripemd160" */
-&(nid_objs[119]),/* "ripemd160WithRSA" */
-&(nid_objs[400]),/* "role" */
-&(nid_objs[448]),/* "room" */
-&(nid_objs[463]),/* "roomNumber" */
-&(nid_objs[19]),/* "rsa" */
-&(nid_objs[ 6]),/* "rsaEncryption" */
-&(nid_objs[644]),/* "rsaOAEPEncryptionSET" */
-&(nid_objs[377]),/* "rsaSignature" */
-&(nid_objs[124]),/* "run length compression" */
-&(nid_objs[482]),/* "sOARecord" */
-&(nid_objs[155]),/* "safeContentsBag" */
-&(nid_objs[291]),/* "sbgp-autonomousSysNum" */
-&(nid_objs[290]),/* "sbgp-ipAddrBlock" */
-&(nid_objs[292]),/* "sbgp-routerIdentifier" */
-&(nid_objs[159]),/* "sdsiCertificate" */
-&(nid_objs[704]),/* "secp112r1" */
-&(nid_objs[705]),/* "secp112r2" */
-&(nid_objs[706]),/* "secp128r1" */
-&(nid_objs[707]),/* "secp128r2" */
-&(nid_objs[708]),/* "secp160k1" */
-&(nid_objs[709]),/* "secp160r1" */
-&(nid_objs[710]),/* "secp160r2" */
-&(nid_objs[711]),/* "secp192k1" */
-&(nid_objs[712]),/* "secp224k1" */
-&(nid_objs[713]),/* "secp224r1" */
-&(nid_objs[714]),/* "secp256k1" */
-&(nid_objs[715]),/* "secp384r1" */
-&(nid_objs[716]),/* "secp521r1" */
-&(nid_objs[154]),/* "secretBag" */
-&(nid_objs[474]),/* "secretary" */
-&(nid_objs[717]),/* "sect113r1" */
-&(nid_objs[718]),/* "sect113r2" */
-&(nid_objs[719]),/* "sect131r1" */
-&(nid_objs[720]),/* "sect131r2" */
-&(nid_objs[721]),/* "sect163k1" */
-&(nid_objs[722]),/* "sect163r1" */
-&(nid_objs[723]),/* "sect163r2" */
-&(nid_objs[724]),/* "sect193r1" */
-&(nid_objs[725]),/* "sect193r2" */
-&(nid_objs[726]),/* "sect233k1" */
-&(nid_objs[727]),/* "sect233r1" */
-&(nid_objs[728]),/* "sect239k1" */
-&(nid_objs[729]),/* "sect283k1" */
-&(nid_objs[730]),/* "sect283r1" */
-&(nid_objs[731]),/* "sect409k1" */
-&(nid_objs[732]),/* "sect409r1" */
-&(nid_objs[733]),/* "sect571k1" */
-&(nid_objs[734]),/* "sect571r1" */
-&(nid_objs[635]),/* "secure device signature" */
-&(nid_objs[105]),/* "serialNumber" */
-&(nid_objs[625]),/* "set-addPolicy" */
-&(nid_objs[515]),/* "set-attr" */
-&(nid_objs[518]),/* "set-brand" */
-&(nid_objs[638]),/* "set-brand-AmericanExpress" */
-&(nid_objs[637]),/* "set-brand-Diners" */
-&(nid_objs[636]),/* "set-brand-IATA-ATA" */
-&(nid_objs[639]),/* "set-brand-JCB" */
-&(nid_objs[641]),/* "set-brand-MasterCard" */
-&(nid_objs[642]),/* "set-brand-Novus" */
-&(nid_objs[640]),/* "set-brand-Visa" */
-&(nid_objs[516]),/* "set-policy" */
-&(nid_objs[607]),/* "set-policy-root" */
-&(nid_objs[624]),/* "set-rootKeyThumb" */
-&(nid_objs[620]),/* "setAttr-Cert" */
-&(nid_objs[628]),/* "setAttr-IssCap-CVM" */
-&(nid_objs[630]),/* "setAttr-IssCap-Sig" */
-&(nid_objs[629]),/* "setAttr-IssCap-T2" */
-&(nid_objs[627]),/* "setAttr-Token-B0Prime" */
-&(nid_objs[626]),/* "setAttr-Token-EMV" */
-&(nid_objs[622]),/* "setAttr-TokenType" */
-&(nid_objs[619]),/* "setCext-IssuerCapabilities" */
-&(nid_objs[615]),/* "setCext-PGWYcapabilities" */
-&(nid_objs[616]),/* "setCext-TokenIdentifier" */
-&(nid_objs[618]),/* "setCext-TokenType" */
-&(nid_objs[617]),/* "setCext-Track2Data" */
-&(nid_objs[611]),/* "setCext-cCertRequired" */
-&(nid_objs[609]),/* "setCext-certType" */
-&(nid_objs[608]),/* "setCext-hashedRoot" */
-&(nid_objs[610]),/* "setCext-merchData" */
-&(nid_objs[613]),/* "setCext-setExt" */
-&(nid_objs[614]),/* "setCext-setQualf" */
-&(nid_objs[612]),/* "setCext-tunneling" */
-&(nid_objs[540]),/* "setct-AcqCardCodeMsg" */
-&(nid_objs[576]),/* "setct-AcqCardCodeMsgTBE" */
-&(nid_objs[570]),/* "setct-AuthReqTBE" */
-&(nid_objs[534]),/* "setct-AuthReqTBS" */
-&(nid_objs[527]),/* "setct-AuthResBaggage" */
-&(nid_objs[571]),/* "setct-AuthResTBE" */
-&(nid_objs[572]),/* "setct-AuthResTBEX" */
-&(nid_objs[535]),/* "setct-AuthResTBS" */
-&(nid_objs[536]),/* "setct-AuthResTBSX" */
-&(nid_objs[528]),/* "setct-AuthRevReqBaggage" */
-&(nid_objs[577]),/* "setct-AuthRevReqTBE" */
-&(nid_objs[541]),/* "setct-AuthRevReqTBS" */
-&(nid_objs[529]),/* "setct-AuthRevResBaggage" */
-&(nid_objs[542]),/* "setct-AuthRevResData" */
-&(nid_objs[578]),/* "setct-AuthRevResTBE" */
-&(nid_objs[579]),/* "setct-AuthRevResTBEB" */
-&(nid_objs[543]),/* "setct-AuthRevResTBS" */
-&(nid_objs[573]),/* "setct-AuthTokenTBE" */
-&(nid_objs[537]),/* "setct-AuthTokenTBS" */
-&(nid_objs[600]),/* "setct-BCIDistributionTBS" */
-&(nid_objs[558]),/* "setct-BatchAdminReqData" */
-&(nid_objs[592]),/* "setct-BatchAdminReqTBE" */
-&(nid_objs[559]),/* "setct-BatchAdminResData" */
-&(nid_objs[593]),/* "setct-BatchAdminResTBE" */
-&(nid_objs[599]),/* "setct-CRLNotificationResTBS" */
-&(nid_objs[598]),/* "setct-CRLNotificationTBS" */
-&(nid_objs[580]),/* "setct-CapReqTBE" */
-&(nid_objs[581]),/* "setct-CapReqTBEX" */
-&(nid_objs[544]),/* "setct-CapReqTBS" */
-&(nid_objs[545]),/* "setct-CapReqTBSX" */
-&(nid_objs[546]),/* "setct-CapResData" */
-&(nid_objs[582]),/* "setct-CapResTBE" */
-&(nid_objs[583]),/* "setct-CapRevReqTBE" */
-&(nid_objs[584]),/* "setct-CapRevReqTBEX" */
-&(nid_objs[547]),/* "setct-CapRevReqTBS" */
-&(nid_objs[548]),/* "setct-CapRevReqTBSX" */
-&(nid_objs[549]),/* "setct-CapRevResData" */
-&(nid_objs[585]),/* "setct-CapRevResTBE" */
-&(nid_objs[538]),/* "setct-CapTokenData" */
-&(nid_objs[530]),/* "setct-CapTokenSeq" */
-&(nid_objs[574]),/* "setct-CapTokenTBE" */
-&(nid_objs[575]),/* "setct-CapTokenTBEX" */
-&(nid_objs[539]),/* "setct-CapTokenTBS" */
-&(nid_objs[560]),/* "setct-CardCInitResTBS" */
-&(nid_objs[566]),/* "setct-CertInqReqTBS" */
-&(nid_objs[563]),/* "setct-CertReqData" */
-&(nid_objs[595]),/* "setct-CertReqTBE" */
-&(nid_objs[596]),/* "setct-CertReqTBEX" */
-&(nid_objs[564]),/* "setct-CertReqTBS" */
-&(nid_objs[565]),/* "setct-CertResData" */
-&(nid_objs[597]),/* "setct-CertResTBE" */
-&(nid_objs[586]),/* "setct-CredReqTBE" */
-&(nid_objs[587]),/* "setct-CredReqTBEX" */
-&(nid_objs[550]),/* "setct-CredReqTBS" */
-&(nid_objs[551]),/* "setct-CredReqTBSX" */
-&(nid_objs[552]),/* "setct-CredResData" */
-&(nid_objs[588]),/* "setct-CredResTBE" */
-&(nid_objs[589]),/* "setct-CredRevReqTBE" */
-&(nid_objs[590]),/* "setct-CredRevReqTBEX" */
-&(nid_objs[553]),/* "setct-CredRevReqTBS" */
-&(nid_objs[554]),/* "setct-CredRevReqTBSX" */
-&(nid_objs[555]),/* "setct-CredRevResData" */
-&(nid_objs[591]),/* "setct-CredRevResTBE" */
-&(nid_objs[567]),/* "setct-ErrorTBS" */
-&(nid_objs[526]),/* "setct-HODInput" */
-&(nid_objs[561]),/* "setct-MeAqCInitResTBS" */
-&(nid_objs[522]),/* "setct-OIData" */
-&(nid_objs[519]),/* "setct-PANData" */
-&(nid_objs[521]),/* "setct-PANOnly" */
-&(nid_objs[520]),/* "setct-PANToken" */
-&(nid_objs[556]),/* "setct-PCertReqData" */
-&(nid_objs[557]),/* "setct-PCertResTBS" */
-&(nid_objs[523]),/* "setct-PI" */
-&(nid_objs[532]),/* "setct-PI-TBS" */
-&(nid_objs[524]),/* "setct-PIData" */
-&(nid_objs[525]),/* "setct-PIDataUnsigned" */
-&(nid_objs[568]),/* "setct-PIDualSignedTBE" */
-&(nid_objs[569]),/* "setct-PIUnsignedTBE" */
-&(nid_objs[531]),/* "setct-PInitResData" */
-&(nid_objs[533]),/* "setct-PResData" */
-&(nid_objs[594]),/* "setct-RegFormReqTBE" */
-&(nid_objs[562]),/* "setct-RegFormResTBS" */
-&(nid_objs[604]),/* "setext-pinAny" */
-&(nid_objs[603]),/* "setext-pinSecure" */
-&(nid_objs[605]),/* "setext-track2" */
-&(nid_objs[41]),/* "sha" */
-&(nid_objs[64]),/* "sha1" */
-&(nid_objs[115]),/* "sha1WithRSA" */
-&(nid_objs[65]),/* "sha1WithRSAEncryption" */
-&(nid_objs[675]),/* "sha224" */
-&(nid_objs[671]),/* "sha224WithRSAEncryption" */
-&(nid_objs[672]),/* "sha256" */
-&(nid_objs[668]),/* "sha256WithRSAEncryption" */
-&(nid_objs[673]),/* "sha384" */
-&(nid_objs[669]),/* "sha384WithRSAEncryption" */
-&(nid_objs[674]),/* "sha512" */
-&(nid_objs[670]),/* "sha512WithRSAEncryption" */
-&(nid_objs[42]),/* "shaWithRSAEncryption" */
-&(nid_objs[52]),/* "signingTime" */
-&(nid_objs[454]),/* "simpleSecurityObject" */
-&(nid_objs[496]),/* "singleLevelQuality" */
-&(nid_objs[16]),/* "stateOrProvinceName" */
-&(nid_objs[660]),/* "streetAddress" */
-&(nid_objs[498]),/* "subtreeMaximumQuality" */
-&(nid_objs[497]),/* "subtreeMinimumQuality" */
-&(nid_objs[100]),/* "surname" */
-&(nid_objs[459]),/* "textEncodedORAddress" */
-&(nid_objs[293]),/* "textNotice" */
-&(nid_objs[106]),/* "title" */
-&(nid_objs[682]),/* "tpBasis" */
-&(nid_objs[436]),/* "ucl" */
-&(nid_objs[ 0]),/* "undefined" */
-&(nid_objs[55]),/* "unstructuredAddress" */
-&(nid_objs[49]),/* "unstructuredName" */
-&(nid_objs[465]),/* "userClass" */
-&(nid_objs[458]),/* "userId" */
-&(nid_objs[373]),/* "valid" */
-&(nid_objs[678]),/* "wap" */
-&(nid_objs[679]),/* "wap-wsg" */
-&(nid_objs[735]),/* "wap-wsg-idm-ecid-wtls1" */
-&(nid_objs[743]),/* "wap-wsg-idm-ecid-wtls10" */
-&(nid_objs[744]),/* "wap-wsg-idm-ecid-wtls11" */
-&(nid_objs[745]),/* "wap-wsg-idm-ecid-wtls12" */
-&(nid_objs[736]),/* "wap-wsg-idm-ecid-wtls3" */
-&(nid_objs[737]),/* "wap-wsg-idm-ecid-wtls4" */
-&(nid_objs[738]),/* "wap-wsg-idm-ecid-wtls5" */
-&(nid_objs[739]),/* "wap-wsg-idm-ecid-wtls6" */
-&(nid_objs[740]),/* "wap-wsg-idm-ecid-wtls7" */
-&(nid_objs[741]),/* "wap-wsg-idm-ecid-wtls8" */
-&(nid_objs[742]),/* "wap-wsg-idm-ecid-wtls9" */
-&(nid_objs[503]),/* "x500UniqueIdentifier" */
-&(nid_objs[158]),/* "x509Certificate" */
-&(nid_objs[160]),/* "x509Crl" */
-&(nid_objs[125]),/* "zlib compression" */
-};
-
-static ASN1_OBJECT *obj_objs[NUM_OBJ]={
-&(nid_objs[ 0]),/* OBJ_undef                        0 */
-&(nid_objs[393]),/* OBJ_joint_iso_ccitt              OBJ_joint_iso_itu_t */
-&(nid_objs[404]),/* OBJ_ccitt                        OBJ_itu_t */
-&(nid_objs[645]),/* OBJ_itu_t                        0 */
-&(nid_objs[434]),/* OBJ_data                         0 9 */
-&(nid_objs[181]),/* OBJ_iso                          1 */
-&(nid_objs[182]),/* OBJ_member_body                  1 2 */
-&(nid_objs[379]),/* OBJ_org                          1 3 */
-&(nid_objs[676]),/* OBJ_identified_organization      1 3 */
-&(nid_objs[646]),/* OBJ_joint_iso_itu_t              2 */
-&(nid_objs[11]),/* OBJ_X500                         2 5 */
-&(nid_objs[647]),/* OBJ_international_organizations  2 23 */
-&(nid_objs[380]),/* OBJ_dod                          1 3 6 */
-&(nid_objs[12]),/* OBJ_X509                         2 5 4 */
-&(nid_objs[378]),/* OBJ_X500algorithms               2 5 8 */
-&(nid_objs[81]),/* OBJ_id_ce                        2 5 29 */
-&(nid_objs[512]),/* OBJ_id_set                       2 23 42 */
-&(nid_objs[678]),/* OBJ_wap                          2 23 43 */
-&(nid_objs[435]),/* OBJ_pss                          0 9 2342 */
-&(nid_objs[183]),/* OBJ_ISO_US                       1 2 840 */
-&(nid_objs[381]),/* OBJ_iana                         1 3 6 1 */
-&(nid_objs[677]),/* OBJ_certicom_arc                 1 3 132 */
-&(nid_objs[394]),/* OBJ_selected_attribute_types     2 5 1 5 */
-&(nid_objs[13]),/* OBJ_commonName                   2 5 4 3 */
-&(nid_objs[100]),/* OBJ_surname                      2 5 4 4 */
-&(nid_objs[105]),/* OBJ_serialNumber                 2 5 4 5 */
-&(nid_objs[14]),/* OBJ_countryName                  2 5 4 6 */
-&(nid_objs[15]),/* OBJ_localityName                 2 5 4 7 */
-&(nid_objs[16]),/* OBJ_stateOrProvinceName          2 5 4 8 */
-&(nid_objs[660]),/* OBJ_streetAddress                2 5 4 9 */
-&(nid_objs[17]),/* OBJ_organizationName             2 5 4 10 */
-&(nid_objs[18]),/* OBJ_organizationalUnitName       2 5 4 11 */
-&(nid_objs[106]),/* OBJ_title                        2 5 4 12 */
-&(nid_objs[107]),/* OBJ_description                  2 5 4 13 */
-&(nid_objs[661]),/* OBJ_postalCode                   2 5 4 17 */
-&(nid_objs[173]),/* OBJ_name                         2 5 4 41 */
-&(nid_objs[99]),/* OBJ_givenName                    2 5 4 42 */
-&(nid_objs[101]),/* OBJ_initials                     2 5 4 43 */
-&(nid_objs[509]),/* OBJ_generationQualifier          2 5 4 44 */
-&(nid_objs[503]),/* OBJ_x500UniqueIdentifier         2 5 4 45 */
-&(nid_objs[174]),/* OBJ_dnQualifier                  2 5 4 46 */
-&(nid_objs[510]),/* OBJ_pseudonym                    2 5 4 65 */
-&(nid_objs[400]),/* OBJ_role                         2 5 4 72 */
-&(nid_objs[769]),/* OBJ_subject_directory_attributes 2 5 29 9 */
-&(nid_objs[82]),/* OBJ_subject_key_identifier       2 5 29 14 */
-&(nid_objs[83]),/* OBJ_key_usage                    2 5 29 15 */
-&(nid_objs[84]),/* OBJ_private_key_usage_period     2 5 29 16 */
-&(nid_objs[85]),/* OBJ_subject_alt_name             2 5 29 17 */
-&(nid_objs[86]),/* OBJ_issuer_alt_name              2 5 29 18 */
-&(nid_objs[87]),/* OBJ_basic_constraints            2 5 29 19 */
-&(nid_objs[88]),/* OBJ_crl_number                   2 5 29 20 */
-&(nid_objs[141]),/* OBJ_crl_reason                   2 5 29 21 */
-&(nid_objs[430]),/* OBJ_hold_instruction_code        2 5 29 23 */
-&(nid_objs[142]),/* OBJ_invalidity_date              2 5 29 24 */
-&(nid_objs[140]),/* OBJ_delta_crl                    2 5 29 27 */
-&(nid_objs[770]),/* OBJ_issuing_distribution_point   2 5 29 28 */
-&(nid_objs[771]),/* OBJ_certificate_issuer           2 5 29 29 */
-&(nid_objs[666]),/* OBJ_name_constraints             2 5 29 30 */
-&(nid_objs[103]),/* OBJ_crl_distribution_points      2 5 29 31 */
-&(nid_objs[89]),/* OBJ_certificate_policies         2 5 29 32 */
-&(nid_objs[747]),/* OBJ_policy_mappings              2 5 29 33 */
-&(nid_objs[90]),/* OBJ_authority_key_identifier     2 5 29 35 */
-&(nid_objs[401]),/* OBJ_policy_constraints           2 5 29 36 */
-&(nid_objs[126]),/* OBJ_ext_key_usage                2 5 29 37 */
-&(nid_objs[748]),/* OBJ_inhibit_any_policy           2 5 29 54 */
-&(nid_objs[402]),/* OBJ_target_information           2 5 29 55 */
-&(nid_objs[403]),/* OBJ_no_rev_avail                 2 5 29 56 */
-&(nid_objs[513]),/* OBJ_set_ctype                    2 23 42 0 */
-&(nid_objs[514]),/* OBJ_set_msgExt                   2 23 42 1 */
-&(nid_objs[515]),/* OBJ_set_attr                     2 23 42 3 */
-&(nid_objs[516]),/* OBJ_set_policy                   2 23 42 5 */
-&(nid_objs[517]),/* OBJ_set_certExt                  2 23 42 7 */
-&(nid_objs[518]),/* OBJ_set_brand                    2 23 42 8 */
-&(nid_objs[679]),/* OBJ_wap_wsg                      2 23 43 13 */
-&(nid_objs[382]),/* OBJ_Directory                    1 3 6 1 1 */
-&(nid_objs[383]),/* OBJ_Management                   1 3 6 1 2 */
-&(nid_objs[384]),/* OBJ_Experimental                 1 3 6 1 3 */
-&(nid_objs[385]),/* OBJ_Private                      1 3 6 1 4 */
-&(nid_objs[386]),/* OBJ_Security                     1 3 6 1 5 */
-&(nid_objs[387]),/* OBJ_SNMPv2                       1 3 6 1 6 */
-&(nid_objs[388]),/* OBJ_Mail                         1 3 6 1 7 */
-&(nid_objs[376]),/* OBJ_algorithm                    1 3 14 3 2 */
-&(nid_objs[395]),/* OBJ_clearance                    2 5 1 5 55 */
-&(nid_objs[19]),/* OBJ_rsa                          2 5 8 1 1 */
-&(nid_objs[96]),/* OBJ_mdc2WithRSA                  2 5 8 3 100 */
-&(nid_objs[95]),/* OBJ_mdc2                         2 5 8 3 101 */
-&(nid_objs[746]),/* OBJ_any_policy                   2 5 29 32 0 */
-&(nid_objs[519]),/* OBJ_setct_PANData                2 23 42 0 0 */
-&(nid_objs[520]),/* OBJ_setct_PANToken               2 23 42 0 1 */
-&(nid_objs[521]),/* OBJ_setct_PANOnly                2 23 42 0 2 */
-&(nid_objs[522]),/* OBJ_setct_OIData                 2 23 42 0 3 */
-&(nid_objs[523]),/* OBJ_setct_PI                     2 23 42 0 4 */
-&(nid_objs[524]),/* OBJ_setct_PIData                 2 23 42 0 5 */
-&(nid_objs[525]),/* OBJ_setct_PIDataUnsigned         2 23 42 0 6 */
-&(nid_objs[526]),/* OBJ_setct_HODInput               2 23 42 0 7 */
-&(nid_objs[527]),/* OBJ_setct_AuthResBaggage         2 23 42 0 8 */
-&(nid_objs[528]),/* OBJ_setct_AuthRevReqBaggage      2 23 42 0 9 */
-&(nid_objs[529]),/* OBJ_setct_AuthRevResBaggage      2 23 42 0 10 */
-&(nid_objs[530]),/* OBJ_setct_CapTokenSeq            2 23 42 0 11 */
-&(nid_objs[531]),/* OBJ_setct_PInitResData           2 23 42 0 12 */
-&(nid_objs[532]),/* OBJ_setct_PI_TBS                 2 23 42 0 13 */
-&(nid_objs[533]),/* OBJ_setct_PResData               2 23 42 0 14 */
-&(nid_objs[534]),/* OBJ_setct_AuthReqTBS             2 23 42 0 16 */
-&(nid_objs[535]),/* OBJ_setct_AuthResTBS             2 23 42 0 17 */
-&(nid_objs[536]),/* OBJ_setct_AuthResTBSX            2 23 42 0 18 */
-&(nid_objs[537]),/* OBJ_setct_AuthTokenTBS           2 23 42 0 19 */
-&(nid_objs[538]),/* OBJ_setct_CapTokenData           2 23 42 0 20 */
-&(nid_objs[539]),/* OBJ_setct_CapTokenTBS            2 23 42 0 21 */
-&(nid_objs[540]),/* OBJ_setct_AcqCardCodeMsg         2 23 42 0 22 */
-&(nid_objs[541]),/* OBJ_setct_AuthRevReqTBS          2 23 42 0 23 */
-&(nid_objs[542]),/* OBJ_setct_AuthRevResData         2 23 42 0 24 */
-&(nid_objs[543]),/* OBJ_setct_AuthRevResTBS          2 23 42 0 25 */
-&(nid_objs[544]),/* OBJ_setct_CapReqTBS              2 23 42 0 26 */
-&(nid_objs[545]),/* OBJ_setct_CapReqTBSX             2 23 42 0 27 */
-&(nid_objs[546]),/* OBJ_setct_CapResData             2 23 42 0 28 */
-&(nid_objs[547]),/* OBJ_setct_CapRevReqTBS           2 23 42 0 29 */
-&(nid_objs[548]),/* OBJ_setct_CapRevReqTBSX          2 23 42 0 30 */
-&(nid_objs[549]),/* OBJ_setct_CapRevResData          2 23 42 0 31 */
-&(nid_objs[550]),/* OBJ_setct_CredReqTBS             2 23 42 0 32 */
-&(nid_objs[551]),/* OBJ_setct_CredReqTBSX            2 23 42 0 33 */
-&(nid_objs[552]),/* OBJ_setct_CredResData            2 23 42 0 34 */
-&(nid_objs[553]),/* OBJ_setct_CredRevReqTBS          2 23 42 0 35 */
-&(nid_objs[554]),/* OBJ_setct_CredRevReqTBSX         2 23 42 0 36 */
-&(nid_objs[555]),/* OBJ_setct_CredRevResData         2 23 42 0 37 */
-&(nid_objs[556]),/* OBJ_setct_PCertReqData           2 23 42 0 38 */
-&(nid_objs[557]),/* OBJ_setct_PCertResTBS            2 23 42 0 39 */
-&(nid_objs[558]),/* OBJ_setct_BatchAdminReqData      2 23 42 0 40 */
-&(nid_objs[559]),/* OBJ_setct_BatchAdminResData      2 23 42 0 41 */
-&(nid_objs[560]),/* OBJ_setct_CardCInitResTBS        2 23 42 0 42 */
-&(nid_objs[561]),/* OBJ_setct_MeAqCInitResTBS        2 23 42 0 43 */
-&(nid_objs[562]),/* OBJ_setct_RegFormResTBS          2 23 42 0 44 */
-&(nid_objs[563]),/* OBJ_setct_CertReqData            2 23 42 0 45 */
-&(nid_objs[564]),/* OBJ_setct_CertReqTBS             2 23 42 0 46 */
-&(nid_objs[565]),/* OBJ_setct_CertResData            2 23 42 0 47 */
-&(nid_objs[566]),/* OBJ_setct_CertInqReqTBS          2 23 42 0 48 */
-&(nid_objs[567]),/* OBJ_setct_ErrorTBS               2 23 42 0 49 */
-&(nid_objs[568]),/* OBJ_setct_PIDualSignedTBE        2 23 42 0 50 */
-&(nid_objs[569]),/* OBJ_setct_PIUnsignedTBE          2 23 42 0 51 */
-&(nid_objs[570]),/* OBJ_setct_AuthReqTBE             2 23 42 0 52 */
-&(nid_objs[571]),/* OBJ_setct_AuthResTBE             2 23 42 0 53 */
-&(nid_objs[572]),/* OBJ_setct_AuthResTBEX            2 23 42 0 54 */
-&(nid_objs[573]),/* OBJ_setct_AuthTokenTBE           2 23 42 0 55 */
-&(nid_objs[574]),/* OBJ_setct_CapTokenTBE            2 23 42 0 56 */
-&(nid_objs[575]),/* OBJ_setct_CapTokenTBEX           2 23 42 0 57 */
-&(nid_objs[576]),/* OBJ_setct_AcqCardCodeMsgTBE      2 23 42 0 58 */
-&(nid_objs[577]),/* OBJ_setct_AuthRevReqTBE          2 23 42 0 59 */
-&(nid_objs[578]),/* OBJ_setct_AuthRevResTBE          2 23 42 0 60 */
-&(nid_objs[579]),/* OBJ_setct_AuthRevResTBEB         2 23 42 0 61 */
-&(nid_objs[580]),/* OBJ_setct_CapReqTBE              2 23 42 0 62 */
-&(nid_objs[581]),/* OBJ_setct_CapReqTBEX             2 23 42 0 63 */
-&(nid_objs[582]),/* OBJ_setct_CapResTBE              2 23 42 0 64 */
-&(nid_objs[583]),/* OBJ_setct_CapRevReqTBE           2 23 42 0 65 */
-&(nid_objs[584]),/* OBJ_setct_CapRevReqTBEX          2 23 42 0 66 */
-&(nid_objs[585]),/* OBJ_setct_CapRevResTBE           2 23 42 0 67 */
-&(nid_objs[586]),/* OBJ_setct_CredReqTBE             2 23 42 0 68 */
-&(nid_objs[587]),/* OBJ_setct_CredReqTBEX            2 23 42 0 69 */
-&(nid_objs[588]),/* OBJ_setct_CredResTBE             2 23 42 0 70 */
-&(nid_objs[589]),/* OBJ_setct_CredRevReqTBE          2 23 42 0 71 */
-&(nid_objs[590]),/* OBJ_setct_CredRevReqTBEX         2 23 42 0 72 */
-&(nid_objs[591]),/* OBJ_setct_CredRevResTBE          2 23 42 0 73 */
-&(nid_objs[592]),/* OBJ_setct_BatchAdminReqTBE       2 23 42 0 74 */
-&(nid_objs[593]),/* OBJ_setct_BatchAdminResTBE       2 23 42 0 75 */
-&(nid_objs[594]),/* OBJ_setct_RegFormReqTBE          2 23 42 0 76 */
-&(nid_objs[595]),/* OBJ_setct_CertReqTBE             2 23 42 0 77 */
-&(nid_objs[596]),/* OBJ_setct_CertReqTBEX            2 23 42 0 78 */
-&(nid_objs[597]),/* OBJ_setct_CertResTBE             2 23 42 0 79 */
-&(nid_objs[598]),/* OBJ_setct_CRLNotificationTBS     2 23 42 0 80 */
-&(nid_objs[599]),/* OBJ_setct_CRLNotificationResTBS  2 23 42 0 81 */
-&(nid_objs[600]),/* OBJ_setct_BCIDistributionTBS     2 23 42 0 82 */
-&(nid_objs[601]),/* OBJ_setext_genCrypt              2 23 42 1 1 */
-&(nid_objs[602]),/* OBJ_setext_miAuth                2 23 42 1 3 */
-&(nid_objs[603]),/* OBJ_setext_pinSecure             2 23 42 1 4 */
-&(nid_objs[604]),/* OBJ_setext_pinAny                2 23 42 1 5 */
-&(nid_objs[605]),/* OBJ_setext_track2                2 23 42 1 7 */
-&(nid_objs[606]),/* OBJ_setext_cv                    2 23 42 1 8 */
-&(nid_objs[620]),/* OBJ_setAttr_Cert                 2 23 42 3 0 */
-&(nid_objs[621]),/* OBJ_setAttr_PGWYcap              2 23 42 3 1 */
-&(nid_objs[622]),/* OBJ_setAttr_TokenType            2 23 42 3 2 */
-&(nid_objs[623]),/* OBJ_setAttr_IssCap               2 23 42 3 3 */
-&(nid_objs[607]),/* OBJ_set_policy_root              2 23 42 5 0 */
-&(nid_objs[608]),/* OBJ_setCext_hashedRoot           2 23 42 7 0 */
-&(nid_objs[609]),/* OBJ_setCext_certType             2 23 42 7 1 */
-&(nid_objs[610]),/* OBJ_setCext_merchData            2 23 42 7 2 */
-&(nid_objs[611]),/* OBJ_setCext_cCertRequired        2 23 42 7 3 */
-&(nid_objs[612]),/* OBJ_setCext_tunneling            2 23 42 7 4 */
-&(nid_objs[613]),/* OBJ_setCext_setExt               2 23 42 7 5 */
-&(nid_objs[614]),/* OBJ_setCext_setQualf             2 23 42 7 6 */
-&(nid_objs[615]),/* OBJ_setCext_PGWYcapabilities     2 23 42 7 7 */
-&(nid_objs[616]),/* OBJ_setCext_TokenIdentifier      2 23 42 7 8 */
-&(nid_objs[617]),/* OBJ_setCext_Track2Data           2 23 42 7 9 */
-&(nid_objs[618]),/* OBJ_setCext_TokenType            2 23 42 7 10 */
-&(nid_objs[619]),/* OBJ_setCext_IssuerCapabilities   2 23 42 7 11 */
-&(nid_objs[636]),/* OBJ_set_brand_IATA_ATA           2 23 42 8 1 */
-&(nid_objs[640]),/* OBJ_set_brand_Visa               2 23 42 8 4 */
-&(nid_objs[641]),/* OBJ_set_brand_MasterCard         2 23 42 8 5 */
-&(nid_objs[637]),/* OBJ_set_brand_Diners             2 23 42 8 30 */
-&(nid_objs[638]),/* OBJ_set_brand_AmericanExpress    2 23 42 8 34 */
-&(nid_objs[639]),/* OBJ_set_brand_JCB                2 23 42 8 35 */
-&(nid_objs[184]),/* OBJ_X9_57                        1 2 840 10040 */
-&(nid_objs[405]),/* OBJ_ansi_X9_62                   1 2 840 10045 */
-&(nid_objs[389]),/* OBJ_Enterprises                  1 3 6 1 4 1 */
-&(nid_objs[504]),/* OBJ_mime_mhs                     1 3 6 1 7 1 */
-&(nid_objs[104]),/* OBJ_md5WithRSA                   1 3 14 3 2 3 */
-&(nid_objs[29]),/* OBJ_des_ecb                      1 3 14 3 2 6 */
-&(nid_objs[31]),/* OBJ_des_cbc                      1 3 14 3 2 7 */
-&(nid_objs[45]),/* OBJ_des_ofb64                    1 3 14 3 2 8 */
-&(nid_objs[30]),/* OBJ_des_cfb64                    1 3 14 3 2 9 */
-&(nid_objs[377]),/* OBJ_rsaSignature                 1 3 14 3 2 11 */
-&(nid_objs[67]),/* OBJ_dsa_2                        1 3 14 3 2 12 */
-&(nid_objs[66]),/* OBJ_dsaWithSHA                   1 3 14 3 2 13 */
-&(nid_objs[42]),/* OBJ_shaWithRSAEncryption         1 3 14 3 2 15 */
-&(nid_objs[32]),/* OBJ_des_ede_ecb                  1 3 14 3 2 17 */
-&(nid_objs[41]),/* OBJ_sha                          1 3 14 3 2 18 */
-&(nid_objs[64]),/* OBJ_sha1                         1 3 14 3 2 26 */
-&(nid_objs[70]),/* OBJ_dsaWithSHA1_2                1 3 14 3 2 27 */
-&(nid_objs[115]),/* OBJ_sha1WithRSA                  1 3 14 3 2 29 */
-&(nid_objs[117]),/* OBJ_ripemd160                    1 3 36 3 2 1 */
-&(nid_objs[143]),/* OBJ_sxnet                        1 3 101 1 4 1 */
-&(nid_objs[721]),/* OBJ_sect163k1                    1 3 132 0 1 */
-&(nid_objs[722]),/* OBJ_sect163r1                    1 3 132 0 2 */
-&(nid_objs[728]),/* OBJ_sect239k1                    1 3 132 0 3 */
-&(nid_objs[717]),/* OBJ_sect113r1                    1 3 132 0 4 */
-&(nid_objs[718]),/* OBJ_sect113r2                    1 3 132 0 5 */
-&(nid_objs[704]),/* OBJ_secp112r1                    1 3 132 0 6 */
-&(nid_objs[705]),/* OBJ_secp112r2                    1 3 132 0 7 */
-&(nid_objs[709]),/* OBJ_secp160r1                    1 3 132 0 8 */
-&(nid_objs[708]),/* OBJ_secp160k1                    1 3 132 0 9 */
-&(nid_objs[714]),/* OBJ_secp256k1                    1 3 132 0 10 */
-&(nid_objs[723]),/* OBJ_sect163r2                    1 3 132 0 15 */
-&(nid_objs[729]),/* OBJ_sect283k1                    1 3 132 0 16 */
-&(nid_objs[730]),/* OBJ_sect283r1                    1 3 132 0 17 */
-&(nid_objs[719]),/* OBJ_sect131r1                    1 3 132 0 22 */
-&(nid_objs[720]),/* OBJ_sect131r2                    1 3 132 0 23 */
-&(nid_objs[724]),/* OBJ_sect193r1                    1 3 132 0 24 */
-&(nid_objs[725]),/* OBJ_sect193r2                    1 3 132 0 25 */
-&(nid_objs[726]),/* OBJ_sect233k1                    1 3 132 0 26 */
-&(nid_objs[727]),/* OBJ_sect233r1                    1 3 132 0 27 */
-&(nid_objs[706]),/* OBJ_secp128r1                    1 3 132 0 28 */
-&(nid_objs[707]),/* OBJ_secp128r2                    1 3 132 0 29 */
-&(nid_objs[710]),/* OBJ_secp160r2                    1 3 132 0 30 */
-&(nid_objs[711]),/* OBJ_secp192k1                    1 3 132 0 31 */
-&(nid_objs[712]),/* OBJ_secp224k1                    1 3 132 0 32 */
-&(nid_objs[713]),/* OBJ_secp224r1                    1 3 132 0 33 */
-&(nid_objs[715]),/* OBJ_secp384r1                    1 3 132 0 34 */
-&(nid_objs[716]),/* OBJ_secp521r1                    1 3 132 0 35 */
-&(nid_objs[731]),/* OBJ_sect409k1                    1 3 132 0 36 */
-&(nid_objs[732]),/* OBJ_sect409r1                    1 3 132 0 37 */
-&(nid_objs[733]),/* OBJ_sect571k1                    1 3 132 0 38 */
-&(nid_objs[734]),/* OBJ_sect571r1                    1 3 132 0 39 */
-&(nid_objs[624]),/* OBJ_set_rootKeyThumb             2 23 42 3 0 0 */
-&(nid_objs[625]),/* OBJ_set_addPolicy                2 23 42 3 0 1 */
-&(nid_objs[626]),/* OBJ_setAttr_Token_EMV            2 23 42 3 2 1 */
-&(nid_objs[627]),/* OBJ_setAttr_Token_B0Prime        2 23 42 3 2 2 */
-&(nid_objs[628]),/* OBJ_setAttr_IssCap_CVM           2 23 42 3 3 3 */
-&(nid_objs[629]),/* OBJ_setAttr_IssCap_T2            2 23 42 3 3 4 */
-&(nid_objs[630]),/* OBJ_setAttr_IssCap_Sig           2 23 42 3 3 5 */
-&(nid_objs[642]),/* OBJ_set_brand_Novus              2 23 42 8 6011 */
-&(nid_objs[735]),/* OBJ_wap_wsg_idm_ecid_wtls1       2 23 43 13 4 1 */
-&(nid_objs[736]),/* OBJ_wap_wsg_idm_ecid_wtls3       2 23 43 13 4 3 */
-&(nid_objs[737]),/* OBJ_wap_wsg_idm_ecid_wtls4       2 23 43 13 4 4 */
-&(nid_objs[738]),/* OBJ_wap_wsg_idm_ecid_wtls5       2 23 43 13 4 5 */
-&(nid_objs[739]),/* OBJ_wap_wsg_idm_ecid_wtls6       2 23 43 13 4 6 */
-&(nid_objs[740]),/* OBJ_wap_wsg_idm_ecid_wtls7       2 23 43 13 4 7 */
-&(nid_objs[741]),/* OBJ_wap_wsg_idm_ecid_wtls8       2 23 43 13 4 8 */
-&(nid_objs[742]),/* OBJ_wap_wsg_idm_ecid_wtls9       2 23 43 13 4 9 */
-&(nid_objs[743]),/* OBJ_wap_wsg_idm_ecid_wtls10      2 23 43 13 4 10 */
-&(nid_objs[744]),/* OBJ_wap_wsg_idm_ecid_wtls11      2 23 43 13 4 11 */
-&(nid_objs[745]),/* OBJ_wap_wsg_idm_ecid_wtls12      2 23 43 13 4 12 */
-&(nid_objs[124]),/* OBJ_rle_compression              1 1 1 1 666 1 */
-&(nid_objs[125]),/* OBJ_zlib_compression             1 1 1 1 666 2 */
-&(nid_objs[ 1]),/* OBJ_rsadsi                       1 2 840 113549 */
-&(nid_objs[185]),/* OBJ_X9cm                         1 2 840 10040 4 */
-&(nid_objs[127]),/* OBJ_id_pkix                      1 3 6 1 5 5 7 */
-&(nid_objs[505]),/* OBJ_mime_mhs_headings            1 3 6 1 7 1 1 */
-&(nid_objs[506]),/* OBJ_mime_mhs_bodies              1 3 6 1 7 1 2 */
-&(nid_objs[119]),/* OBJ_ripemd160WithRSA             1 3 36 3 3 1 2 */
-&(nid_objs[631]),/* OBJ_setAttr_GenCryptgrm          2 23 42 3 3 3 1 */
-&(nid_objs[632]),/* OBJ_setAttr_T2Enc                2 23 42 3 3 4 1 */
-&(nid_objs[633]),/* OBJ_setAttr_T2cleartxt           2 23 42 3 3 4 2 */
-&(nid_objs[634]),/* OBJ_setAttr_TokICCsig            2 23 42 3 3 5 1 */
-&(nid_objs[635]),/* OBJ_setAttr_SecDevSig            2 23 42 3 3 5 2 */
-&(nid_objs[436]),/* OBJ_ucl                          0 9 2342 19200300 */
-&(nid_objs[ 2]),/* OBJ_pkcs                         1 2 840 113549 1 */
-&(nid_objs[431]),/* OBJ_hold_instruction_none        1 2 840 10040 2 1 */
-&(nid_objs[432]),/* OBJ_hold_instruction_call_issuer 1 2 840 10040 2 2 */
-&(nid_objs[433]),/* OBJ_hold_instruction_reject      1 2 840 10040 2 3 */
-&(nid_objs[116]),/* OBJ_dsa                          1 2 840 10040 4 1 */
-&(nid_objs[113]),/* OBJ_dsaWithSHA1                  1 2 840 10040 4 3 */
-&(nid_objs[406]),/* OBJ_X9_62_prime_field            1 2 840 10045 1 1 */
-&(nid_objs[407]),/* OBJ_X9_62_characteristic_two_field 1 2 840 10045 1 2 */
-&(nid_objs[408]),/* OBJ_X9_62_id_ecPublicKey         1 2 840 10045 2 1 */
-&(nid_objs[416]),/* OBJ_ecdsa_with_SHA1              1 2 840 10045 4 1 */
-&(nid_objs[258]),/* OBJ_id_pkix_mod                  1 3 6 1 5 5 7 0 */
-&(nid_objs[175]),/* OBJ_id_pe                        1 3 6 1 5 5 7 1 */
-&(nid_objs[259]),/* OBJ_id_qt                        1 3 6 1 5 5 7 2 */
-&(nid_objs[128]),/* OBJ_id_kp                        1 3 6 1 5 5 7 3 */
-&(nid_objs[260]),/* OBJ_id_it                        1 3 6 1 5 5 7 4 */
-&(nid_objs[261]),/* OBJ_id_pkip                      1 3 6 1 5 5 7 5 */
-&(nid_objs[262]),/* OBJ_id_alg                       1 3 6 1 5 5 7 6 */
-&(nid_objs[263]),/* OBJ_id_cmc                       1 3 6 1 5 5 7 7 */
-&(nid_objs[264]),/* OBJ_id_on                        1 3 6 1 5 5 7 8 */
-&(nid_objs[265]),/* OBJ_id_pda                       1 3 6 1 5 5 7 9 */
-&(nid_objs[266]),/* OBJ_id_aca                       1 3 6 1 5 5 7 10 */
-&(nid_objs[267]),/* OBJ_id_qcs                       1 3 6 1 5 5 7 11 */
-&(nid_objs[268]),/* OBJ_id_cct                       1 3 6 1 5 5 7 12 */
-&(nid_objs[662]),/* OBJ_id_ppl                       1 3 6 1 5 5 7 21 */
-&(nid_objs[176]),/* OBJ_id_ad                        1 3 6 1 5 5 7 48 */
-&(nid_objs[507]),/* OBJ_id_hex_partial_message       1 3 6 1 7 1 1 1 */
-&(nid_objs[508]),/* OBJ_id_hex_multipart_message     1 3 6 1 7 1 1 2 */
-&(nid_objs[57]),/* OBJ_netscape                     2 16 840 1 113730 */
-&(nid_objs[754]),/* OBJ_camellia_128_ecb             0 3 4401 5 3 1 9 1 */
-&(nid_objs[766]),/* OBJ_camellia_128_ofb128          0 3 4401 5 3 1 9 3 */
-&(nid_objs[757]),/* OBJ_camellia_128_cfb128          0 3 4401 5 3 1 9 4 */
-&(nid_objs[755]),/* OBJ_camellia_192_ecb             0 3 4401 5 3 1 9 21 */
-&(nid_objs[767]),/* OBJ_camellia_192_ofb128          0 3 4401 5 3 1 9 23 */
-&(nid_objs[758]),/* OBJ_camellia_192_cfb128          0 3 4401 5 3 1 9 24 */
-&(nid_objs[756]),/* OBJ_camellia_256_ecb             0 3 4401 5 3 1 9 41 */
-&(nid_objs[768]),/* OBJ_camellia_256_ofb128          0 3 4401 5 3 1 9 43 */
-&(nid_objs[759]),/* OBJ_camellia_256_cfb128          0 3 4401 5 3 1 9 44 */
-&(nid_objs[437]),/* OBJ_pilot                        0 9 2342 19200300 100 */
-&(nid_objs[186]),/* OBJ_pkcs1                        1 2 840 113549 1 1 */
-&(nid_objs[27]),/* OBJ_pkcs3                        1 2 840 113549 1 3 */
-&(nid_objs[187]),/* OBJ_pkcs5                        1 2 840 113549 1 5 */
-&(nid_objs[20]),/* OBJ_pkcs7                        1 2 840 113549 1 7 */
-&(nid_objs[47]),/* OBJ_pkcs9                        1 2 840 113549 1 9 */
-&(nid_objs[ 3]),/* OBJ_md2                          1 2 840 113549 2 2 */
-&(nid_objs[257]),/* OBJ_md4                          1 2 840 113549 2 4 */
-&(nid_objs[ 4]),/* OBJ_md5                          1 2 840 113549 2 5 */
-&(nid_objs[163]),/* OBJ_hmacWithSHA1                 1 2 840 113549 2 7 */
-&(nid_objs[37]),/* OBJ_rc2_cbc                      1 2 840 113549 3 2 */
-&(nid_objs[ 5]),/* OBJ_rc4                          1 2 840 113549 3 4 */
-&(nid_objs[44]),/* OBJ_des_ede3_cbc                 1 2 840 113549 3 7 */
-&(nid_objs[120]),/* OBJ_rc5_cbc                      1 2 840 113549 3 8 */
-&(nid_objs[643]),/* OBJ_des_cdmf                     1 2 840 113549 3 10 */
-&(nid_objs[680]),/* OBJ_X9_62_id_characteristic_two_basis 1 2 840 10045 1 2 3 */
-&(nid_objs[684]),/* OBJ_X9_62_c2pnb163v1             1 2 840 10045 3 0 1 */
-&(nid_objs[685]),/* OBJ_X9_62_c2pnb163v2             1 2 840 10045 3 0 2 */
-&(nid_objs[686]),/* OBJ_X9_62_c2pnb163v3             1 2 840 10045 3 0 3 */
-&(nid_objs[687]),/* OBJ_X9_62_c2pnb176v1             1 2 840 10045 3 0 4 */
-&(nid_objs[688]),/* OBJ_X9_62_c2tnb191v1             1 2 840 10045 3 0 5 */
-&(nid_objs[689]),/* OBJ_X9_62_c2tnb191v2             1 2 840 10045 3 0 6 */
-&(nid_objs[690]),/* OBJ_X9_62_c2tnb191v3             1 2 840 10045 3 0 7 */
-&(nid_objs[691]),/* OBJ_X9_62_c2onb191v4             1 2 840 10045 3 0 8 */
-&(nid_objs[692]),/* OBJ_X9_62_c2onb191v5             1 2 840 10045 3 0 9 */
-&(nid_objs[693]),/* OBJ_X9_62_c2pnb208w1             1 2 840 10045 3 0 10 */
-&(nid_objs[694]),/* OBJ_X9_62_c2tnb239v1             1 2 840 10045 3 0 11 */
-&(nid_objs[695]),/* OBJ_X9_62_c2tnb239v2             1 2 840 10045 3 0 12 */
-&(nid_objs[696]),/* OBJ_X9_62_c2tnb239v3             1 2 840 10045 3 0 13 */
-&(nid_objs[697]),/* OBJ_X9_62_c2onb239v4             1 2 840 10045 3 0 14 */
-&(nid_objs[698]),/* OBJ_X9_62_c2onb239v5             1 2 840 10045 3 0 15 */
-&(nid_objs[699]),/* OBJ_X9_62_c2pnb272w1             1 2 840 10045 3 0 16 */
-&(nid_objs[700]),/* OBJ_X9_62_c2pnb304w1             1 2 840 10045 3 0 17 */
-&(nid_objs[701]),/* OBJ_X9_62_c2tnb359v1             1 2 840 10045 3 0 18 */
-&(nid_objs[702]),/* OBJ_X9_62_c2pnb368w1             1 2 840 10045 3 0 19 */
-&(nid_objs[703]),/* OBJ_X9_62_c2tnb431r1             1 2 840 10045 3 0 20 */
-&(nid_objs[409]),/* OBJ_X9_62_prime192v1             1 2 840 10045 3 1 1 */
-&(nid_objs[410]),/* OBJ_X9_62_prime192v2             1 2 840 10045 3 1 2 */
-&(nid_objs[411]),/* OBJ_X9_62_prime192v3             1 2 840 10045 3 1 3 */
-&(nid_objs[412]),/* OBJ_X9_62_prime239v1             1 2 840 10045 3 1 4 */
-&(nid_objs[413]),/* OBJ_X9_62_prime239v2             1 2 840 10045 3 1 5 */
-&(nid_objs[414]),/* OBJ_X9_62_prime239v3             1 2 840 10045 3 1 6 */
-&(nid_objs[415]),/* OBJ_X9_62_prime256v1             1 2 840 10045 3 1 7 */
-&(nid_objs[269]),/* OBJ_id_pkix1_explicit_88         1 3 6 1 5 5 7 0 1 */
-&(nid_objs[270]),/* OBJ_id_pkix1_implicit_88         1 3 6 1 5 5 7 0 2 */
-&(nid_objs[271]),/* OBJ_id_pkix1_explicit_93         1 3 6 1 5 5 7 0 3 */
-&(nid_objs[272]),/* OBJ_id_pkix1_implicit_93         1 3 6 1 5 5 7 0 4 */
-&(nid_objs[273]),/* OBJ_id_mod_crmf                  1 3 6 1 5 5 7 0 5 */
-&(nid_objs[274]),/* OBJ_id_mod_cmc                   1 3 6 1 5 5 7 0 6 */
-&(nid_objs[275]),/* OBJ_id_mod_kea_profile_88        1 3 6 1 5 5 7 0 7 */
-&(nid_objs[276]),/* OBJ_id_mod_kea_profile_93        1 3 6 1 5 5 7 0 8 */
-&(nid_objs[277]),/* OBJ_id_mod_cmp                   1 3 6 1 5 5 7 0 9 */
-&(nid_objs[278]),/* OBJ_id_mod_qualified_cert_88     1 3 6 1 5 5 7 0 10 */
-&(nid_objs[279]),/* OBJ_id_mod_qualified_cert_93     1 3 6 1 5 5 7 0 11 */
-&(nid_objs[280]),/* OBJ_id_mod_attribute_cert        1 3 6 1 5 5 7 0 12 */
-&(nid_objs[281]),/* OBJ_id_mod_timestamp_protocol    1 3 6 1 5 5 7 0 13 */
-&(nid_objs[282]),/* OBJ_id_mod_ocsp                  1 3 6 1 5 5 7 0 14 */
-&(nid_objs[283]),/* OBJ_id_mod_dvcs                  1 3 6 1 5 5 7 0 15 */
-&(nid_objs[284]),/* OBJ_id_mod_cmp2000               1 3 6 1 5 5 7 0 16 */
-&(nid_objs[177]),/* OBJ_info_access                  1 3 6 1 5 5 7 1 1 */
-&(nid_objs[285]),/* OBJ_biometricInfo                1 3 6 1 5 5 7 1 2 */
-&(nid_objs[286]),/* OBJ_qcStatements                 1 3 6 1 5 5 7 1 3 */
-&(nid_objs[287]),/* OBJ_ac_auditEntity               1 3 6 1 5 5 7 1 4 */
-&(nid_objs[288]),/* OBJ_ac_targeting                 1 3 6 1 5 5 7 1 5 */
-&(nid_objs[289]),/* OBJ_aaControls                   1 3 6 1 5 5 7 1 6 */
-&(nid_objs[290]),/* OBJ_sbgp_ipAddrBlock             1 3 6 1 5 5 7 1 7 */
-&(nid_objs[291]),/* OBJ_sbgp_autonomousSysNum        1 3 6 1 5 5 7 1 8 */
-&(nid_objs[292]),/* OBJ_sbgp_routerIdentifier        1 3 6 1 5 5 7 1 9 */
-&(nid_objs[397]),/* OBJ_ac_proxying                  1 3 6 1 5 5 7 1 10 */
-&(nid_objs[398]),/* OBJ_sinfo_access                 1 3 6 1 5 5 7 1 11 */
-&(nid_objs[663]),/* OBJ_proxyCertInfo                1 3 6 1 5 5 7 1 14 */
-&(nid_objs[164]),/* OBJ_id_qt_cps                    1 3 6 1 5 5 7 2 1 */
-&(nid_objs[165]),/* OBJ_id_qt_unotice                1 3 6 1 5 5 7 2 2 */
-&(nid_objs[293]),/* OBJ_textNotice                   1 3 6 1 5 5 7 2 3 */
-&(nid_objs[129]),/* OBJ_server_auth                  1 3 6 1 5 5 7 3 1 */
-&(nid_objs[130]),/* OBJ_client_auth                  1 3 6 1 5 5 7 3 2 */
-&(nid_objs[131]),/* OBJ_code_sign                    1 3 6 1 5 5 7 3 3 */
-&(nid_objs[132]),/* OBJ_email_protect                1 3 6 1 5 5 7 3 4 */
-&(nid_objs[294]),/* OBJ_ipsecEndSystem               1 3 6 1 5 5 7 3 5 */
-&(nid_objs[295]),/* OBJ_ipsecTunnel                  1 3 6 1 5 5 7 3 6 */
-&(nid_objs[296]),/* OBJ_ipsecUser                    1 3 6 1 5 5 7 3 7 */
-&(nid_objs[133]),/* OBJ_time_stamp                   1 3 6 1 5 5 7 3 8 */
-&(nid_objs[180]),/* OBJ_OCSP_sign                    1 3 6 1 5 5 7 3 9 */
-&(nid_objs[297]),/* OBJ_dvcs                         1 3 6 1 5 5 7 3 10 */
-&(nid_objs[298]),/* OBJ_id_it_caProtEncCert          1 3 6 1 5 5 7 4 1 */
-&(nid_objs[299]),/* OBJ_id_it_signKeyPairTypes       1 3 6 1 5 5 7 4 2 */
-&(nid_objs[300]),/* OBJ_id_it_encKeyPairTypes        1 3 6 1 5 5 7 4 3 */
-&(nid_objs[301]),/* OBJ_id_it_preferredSymmAlg       1 3 6 1 5 5 7 4 4 */
-&(nid_objs[302]),/* OBJ_id_it_caKeyUpdateInfo        1 3 6 1 5 5 7 4 5 */
-&(nid_objs[303]),/* OBJ_id_it_currentCRL             1 3 6 1 5 5 7 4 6 */
-&(nid_objs[304]),/* OBJ_id_it_unsupportedOIDs        1 3 6 1 5 5 7 4 7 */
-&(nid_objs[305]),/* OBJ_id_it_subscriptionRequest    1 3 6 1 5 5 7 4 8 */
-&(nid_objs[306]),/* OBJ_id_it_subscriptionResponse   1 3 6 1 5 5 7 4 9 */
-&(nid_objs[307]),/* OBJ_id_it_keyPairParamReq        1 3 6 1 5 5 7 4 10 */
-&(nid_objs[308]),/* OBJ_id_it_keyPairParamRep        1 3 6 1 5 5 7 4 11 */
-&(nid_objs[309]),/* OBJ_id_it_revPassphrase          1 3 6 1 5 5 7 4 12 */
-&(nid_objs[310]),/* OBJ_id_it_implicitConfirm        1 3 6 1 5 5 7 4 13 */
-&(nid_objs[311]),/* OBJ_id_it_confirmWaitTime        1 3 6 1 5 5 7 4 14 */
-&(nid_objs[312]),/* OBJ_id_it_origPKIMessage         1 3 6 1 5 5 7 4 15 */
-&(nid_objs[313]),/* OBJ_id_regCtrl                   1 3 6 1 5 5 7 5 1 */
-&(nid_objs[314]),/* OBJ_id_regInfo                   1 3 6 1 5 5 7 5 2 */
-&(nid_objs[323]),/* OBJ_id_alg_des40                 1 3 6 1 5 5 7 6 1 */
-&(nid_objs[324]),/* OBJ_id_alg_noSignature           1 3 6 1 5 5 7 6 2 */
-&(nid_objs[325]),/* OBJ_id_alg_dh_sig_hmac_sha1      1 3 6 1 5 5 7 6 3 */
-&(nid_objs[326]),/* OBJ_id_alg_dh_pop                1 3 6 1 5 5 7 6 4 */
-&(nid_objs[327]),/* OBJ_id_cmc_statusInfo            1 3 6 1 5 5 7 7 1 */
-&(nid_objs[328]),/* OBJ_id_cmc_identification        1 3 6 1 5 5 7 7 2 */
-&(nid_objs[329]),/* OBJ_id_cmc_identityProof         1 3 6 1 5 5 7 7 3 */
-&(nid_objs[330]),/* OBJ_id_cmc_dataReturn            1 3 6 1 5 5 7 7 4 */
-&(nid_objs[331]),/* OBJ_id_cmc_transactionId         1 3 6 1 5 5 7 7 5 */
-&(nid_objs[332]),/* OBJ_id_cmc_senderNonce           1 3 6 1 5 5 7 7 6 */
-&(nid_objs[333]),/* OBJ_id_cmc_recipientNonce        1 3 6 1 5 5 7 7 7 */
-&(nid_objs[334]),/* OBJ_id_cmc_addExtensions         1 3 6 1 5 5 7 7 8 */
-&(nid_objs[335]),/* OBJ_id_cmc_encryptedPOP          1 3 6 1 5 5 7 7 9 */
-&(nid_objs[336]),/* OBJ_id_cmc_decryptedPOP          1 3 6 1 5 5 7 7 10 */
-&(nid_objs[337]),/* OBJ_id_cmc_lraPOPWitness         1 3 6 1 5 5 7 7 11 */
-&(nid_objs[338]),/* OBJ_id_cmc_getCert               1 3 6 1 5 5 7 7 15 */
-&(nid_objs[339]),/* OBJ_id_cmc_getCRL                1 3 6 1 5 5 7 7 16 */
-&(nid_objs[340]),/* OBJ_id_cmc_revokeRequest         1 3 6 1 5 5 7 7 17 */
-&(nid_objs[341]),/* OBJ_id_cmc_regInfo               1 3 6 1 5 5 7 7 18 */
-&(nid_objs[342]),/* OBJ_id_cmc_responseInfo          1 3 6 1 5 5 7 7 19 */
-&(nid_objs[343]),/* OBJ_id_cmc_queryPending          1 3 6 1 5 5 7 7 21 */
-&(nid_objs[344]),/* OBJ_id_cmc_popLinkRandom         1 3 6 1 5 5 7 7 22 */
-&(nid_objs[345]),/* OBJ_id_cmc_popLinkWitness        1 3 6 1 5 5 7 7 23 */
-&(nid_objs[346]),/* OBJ_id_cmc_confirmCertAcceptance 1 3 6 1 5 5 7 7 24 */
-&(nid_objs[347]),/* OBJ_id_on_personalData           1 3 6 1 5 5 7 8 1 */
-&(nid_objs[348]),/* OBJ_id_pda_dateOfBirth           1 3 6 1 5 5 7 9 1 */
-&(nid_objs[349]),/* OBJ_id_pda_placeOfBirth          1 3 6 1 5 5 7 9 2 */
-&(nid_objs[351]),/* OBJ_id_pda_gender                1 3 6 1 5 5 7 9 3 */
-&(nid_objs[352]),/* OBJ_id_pda_countryOfCitizenship  1 3 6 1 5 5 7 9 4 */
-&(nid_objs[353]),/* OBJ_id_pda_countryOfResidence    1 3 6 1 5 5 7 9 5 */
-&(nid_objs[354]),/* OBJ_id_aca_authenticationInfo    1 3 6 1 5 5 7 10 1 */
-&(nid_objs[355]),/* OBJ_id_aca_accessIdentity        1 3 6 1 5 5 7 10 2 */
-&(nid_objs[356]),/* OBJ_id_aca_chargingIdentity      1 3 6 1 5 5 7 10 3 */
-&(nid_objs[357]),/* OBJ_id_aca_group                 1 3 6 1 5 5 7 10 4 */
-&(nid_objs[358]),/* OBJ_id_aca_role                  1 3 6 1 5 5 7 10 5 */
-&(nid_objs[399]),/* OBJ_id_aca_encAttrs              1 3 6 1 5 5 7 10 6 */
-&(nid_objs[359]),/* OBJ_id_qcs_pkixQCSyntax_v1       1 3 6 1 5 5 7 11 1 */
-&(nid_objs[360]),/* OBJ_id_cct_crs                   1 3 6 1 5 5 7 12 1 */
-&(nid_objs[361]),/* OBJ_id_cct_PKIData               1 3 6 1 5 5 7 12 2 */
-&(nid_objs[362]),/* OBJ_id_cct_PKIResponse           1 3 6 1 5 5 7 12 3 */
-&(nid_objs[664]),/* OBJ_id_ppl_anyLanguage           1 3 6 1 5 5 7 21 0 */
-&(nid_objs[665]),/* OBJ_id_ppl_inheritAll            1 3 6 1 5 5 7 21 1 */
-&(nid_objs[667]),/* OBJ_Independent                  1 3 6 1 5 5 7 21 2 */
-&(nid_objs[178]),/* OBJ_ad_OCSP                      1 3 6 1 5 5 7 48 1 */
-&(nid_objs[179]),/* OBJ_ad_ca_issuers                1 3 6 1 5 5 7 48 2 */
-&(nid_objs[363]),/* OBJ_ad_timeStamping              1 3 6 1 5 5 7 48 3 */
-&(nid_objs[364]),/* OBJ_ad_dvcs                      1 3 6 1 5 5 7 48 4 */
-&(nid_objs[58]),/* OBJ_netscape_cert_extension      2 16 840 1 113730 1 */
-&(nid_objs[59]),/* OBJ_netscape_data_type           2 16 840 1 113730 2 */
-&(nid_objs[438]),/* OBJ_pilotAttributeType           0 9 2342 19200300 100 1 */
-&(nid_objs[439]),/* OBJ_pilotAttributeSyntax         0 9 2342 19200300 100 3 */
-&(nid_objs[440]),/* OBJ_pilotObjectClass             0 9 2342 19200300 100 4 */
-&(nid_objs[441]),/* OBJ_pilotGroups                  0 9 2342 19200300 100 10 */
-&(nid_objs[108]),/* OBJ_cast5_cbc                    1 2 840 113533 7 66 10 */
-&(nid_objs[112]),/* OBJ_pbeWithMD5AndCast5_CBC       1 2 840 113533 7 66 12 */
-&(nid_objs[ 6]),/* OBJ_rsaEncryption                1 2 840 113549 1 1 1 */
-&(nid_objs[ 7]),/* OBJ_md2WithRSAEncryption         1 2 840 113549 1 1 2 */
-&(nid_objs[396]),/* OBJ_md4WithRSAEncryption         1 2 840 113549 1 1 3 */
-&(nid_objs[ 8]),/* OBJ_md5WithRSAEncryption         1 2 840 113549 1 1 4 */
-&(nid_objs[65]),/* OBJ_sha1WithRSAEncryption        1 2 840 113549 1 1 5 */
-&(nid_objs[644]),/* OBJ_rsaOAEPEncryptionSET         1 2 840 113549 1 1 6 */
-&(nid_objs[668]),/* OBJ_sha256WithRSAEncryption      1 2 840 113549 1 1 11 */
-&(nid_objs[669]),/* OBJ_sha384WithRSAEncryption      1 2 840 113549 1 1 12 */
-&(nid_objs[670]),/* OBJ_sha512WithRSAEncryption      1 2 840 113549 1 1 13 */
-&(nid_objs[671]),/* OBJ_sha224WithRSAEncryption      1 2 840 113549 1 1 14 */
-&(nid_objs[28]),/* OBJ_dhKeyAgreement               1 2 840 113549 1 3 1 */
-&(nid_objs[ 9]),/* OBJ_pbeWithMD2AndDES_CBC         1 2 840 113549 1 5 1 */
-&(nid_objs[10]),/* OBJ_pbeWithMD5AndDES_CBC         1 2 840 113549 1 5 3 */
-&(nid_objs[168]),/* OBJ_pbeWithMD2AndRC2_CBC         1 2 840 113549 1 5 4 */
-&(nid_objs[169]),/* OBJ_pbeWithMD5AndRC2_CBC         1 2 840 113549 1 5 6 */
-&(nid_objs[170]),/* OBJ_pbeWithSHA1AndDES_CBC        1 2 840 113549 1 5 10 */
-&(nid_objs[68]),/* OBJ_pbeWithSHA1AndRC2_CBC        1 2 840 113549 1 5 11 */
-&(nid_objs[69]),/* OBJ_id_pbkdf2                    1 2 840 113549 1 5 12 */
-&(nid_objs[161]),/* OBJ_pbes2                        1 2 840 113549 1 5 13 */
-&(nid_objs[162]),/* OBJ_pbmac1                       1 2 840 113549 1 5 14 */
-&(nid_objs[21]),/* OBJ_pkcs7_data                   1 2 840 113549 1 7 1 */
-&(nid_objs[22]),/* OBJ_pkcs7_signed                 1 2 840 113549 1 7 2 */
-&(nid_objs[23]),/* OBJ_pkcs7_enveloped              1 2 840 113549 1 7 3 */
-&(nid_objs[24]),/* OBJ_pkcs7_signedAndEnveloped     1 2 840 113549 1 7 4 */
-&(nid_objs[25]),/* OBJ_pkcs7_digest                 1 2 840 113549 1 7 5 */
-&(nid_objs[26]),/* OBJ_pkcs7_encrypted              1 2 840 113549 1 7 6 */
-&(nid_objs[48]),/* OBJ_pkcs9_emailAddress           1 2 840 113549 1 9 1 */
-&(nid_objs[49]),/* OBJ_pkcs9_unstructuredName       1 2 840 113549 1 9 2 */
-&(nid_objs[50]),/* OBJ_pkcs9_contentType            1 2 840 113549 1 9 3 */
-&(nid_objs[51]),/* OBJ_pkcs9_messageDigest          1 2 840 113549 1 9 4 */
-&(nid_objs[52]),/* OBJ_pkcs9_signingTime            1 2 840 113549 1 9 5 */
-&(nid_objs[53]),/* OBJ_pkcs9_countersignature       1 2 840 113549 1 9 6 */
-&(nid_objs[54]),/* OBJ_pkcs9_challengePassword      1 2 840 113549 1 9 7 */
-&(nid_objs[55]),/* OBJ_pkcs9_unstructuredAddress    1 2 840 113549 1 9 8 */
-&(nid_objs[56]),/* OBJ_pkcs9_extCertAttributes      1 2 840 113549 1 9 9 */
-&(nid_objs[172]),/* OBJ_ext_req                      1 2 840 113549 1 9 14 */
-&(nid_objs[167]),/* OBJ_SMIMECapabilities            1 2 840 113549 1 9 15 */
-&(nid_objs[188]),/* OBJ_SMIME                        1 2 840 113549 1 9 16 */
-&(nid_objs[156]),/* OBJ_friendlyName                 1 2 840 113549 1 9 20 */
-&(nid_objs[157]),/* OBJ_localKeyID                   1 2 840 113549 1 9 21 */
-&(nid_objs[681]),/* OBJ_X9_62_onBasis                1 2 840 10045 1 2 3 1 */
-&(nid_objs[682]),/* OBJ_X9_62_tpBasis                1 2 840 10045 1 2 3 2 */
-&(nid_objs[683]),/* OBJ_X9_62_ppBasis                1 2 840 10045 1 2 3 3 */
-&(nid_objs[417]),/* OBJ_ms_csp_name                  1 3 6 1 4 1 311 17 1 */
-&(nid_objs[390]),/* OBJ_dcObject                     1 3 6 1 4 1 1466 344 */
-&(nid_objs[91]),/* OBJ_bf_cbc                       1 3 6 1 4 1 3029 1 2 */
-&(nid_objs[315]),/* OBJ_id_regCtrl_regToken          1 3 6 1 5 5 7 5 1 1 */
-&(nid_objs[316]),/* OBJ_id_regCtrl_authenticator     1 3 6 1 5 5 7 5 1 2 */
-&(nid_objs[317]),/* OBJ_id_regCtrl_pkiPublicationInfo 1 3 6 1 5 5 7 5 1 3 */
-&(nid_objs[318]),/* OBJ_id_regCtrl_pkiArchiveOptions 1 3 6 1 5 5 7 5 1 4 */
-&(nid_objs[319]),/* OBJ_id_regCtrl_oldCertID         1 3 6 1 5 5 7 5 1 5 */
-&(nid_objs[320]),/* OBJ_id_regCtrl_protocolEncrKey   1 3 6 1 5 5 7 5 1 6 */
-&(nid_objs[321]),/* OBJ_id_regInfo_utf8Pairs         1 3 6 1 5 5 7 5 2 1 */
-&(nid_objs[322]),/* OBJ_id_regInfo_certReq           1 3 6 1 5 5 7 5 2 2 */
-&(nid_objs[365]),/* OBJ_id_pkix_OCSP_basic           1 3 6 1 5 5 7 48 1 1 */
-&(nid_objs[366]),/* OBJ_id_pkix_OCSP_Nonce           1 3 6 1 5 5 7 48 1 2 */
-&(nid_objs[367]),/* OBJ_id_pkix_OCSP_CrlID           1 3 6 1 5 5 7 48 1 3 */
-&(nid_objs[368]),/* OBJ_id_pkix_OCSP_acceptableResponses 1 3 6 1 5 5 7 48 1 4 */
-&(nid_objs[369]),/* OBJ_id_pkix_OCSP_noCheck         1 3 6 1 5 5 7 48 1 5 */
-&(nid_objs[370]),/* OBJ_id_pkix_OCSP_archiveCutoff   1 3 6 1 5 5 7 48 1 6 */
-&(nid_objs[371]),/* OBJ_id_pkix_OCSP_serviceLocator  1 3 6 1 5 5 7 48 1 7 */
-&(nid_objs[372]),/* OBJ_id_pkix_OCSP_extendedStatus  1 3 6 1 5 5 7 48 1 8 */
-&(nid_objs[373]),/* OBJ_id_pkix_OCSP_valid           1 3 6 1 5 5 7 48 1 9 */
-&(nid_objs[374]),/* OBJ_id_pkix_OCSP_path            1 3 6 1 5 5 7 48 1 10 */
-&(nid_objs[375]),/* OBJ_id_pkix_OCSP_trustRoot       1 3 6 1 5 5 7 48 1 11 */
-&(nid_objs[418]),/* OBJ_aes_128_ecb                  2 16 840 1 101 3 4 1 1 */
-&(nid_objs[419]),/* OBJ_aes_128_cbc                  2 16 840 1 101 3 4 1 2 */
-&(nid_objs[420]),/* OBJ_aes_128_ofb128               2 16 840 1 101 3 4 1 3 */
-&(nid_objs[421]),/* OBJ_aes_128_cfb128               2 16 840 1 101 3 4 1 4 */
-&(nid_objs[422]),/* OBJ_aes_192_ecb                  2 16 840 1 101 3 4 1 21 */
-&(nid_objs[423]),/* OBJ_aes_192_cbc                  2 16 840 1 101 3 4 1 22 */
-&(nid_objs[424]),/* OBJ_aes_192_ofb128               2 16 840 1 101 3 4 1 23 */
-&(nid_objs[425]),/* OBJ_aes_192_cfb128               2 16 840 1 101 3 4 1 24 */
-&(nid_objs[426]),/* OBJ_aes_256_ecb                  2 16 840 1 101 3 4 1 41 */
-&(nid_objs[427]),/* OBJ_aes_256_cbc                  2 16 840 1 101 3 4 1 42 */
-&(nid_objs[428]),/* OBJ_aes_256_ofb128               2 16 840 1 101 3 4 1 43 */
-&(nid_objs[429]),/* OBJ_aes_256_cfb128               2 16 840 1 101 3 4 1 44 */
-&(nid_objs[672]),/* OBJ_sha256                       2 16 840 1 101 3 4 2 1 */
-&(nid_objs[673]),/* OBJ_sha384                       2 16 840 1 101 3 4 2 2 */
-&(nid_objs[674]),/* OBJ_sha512                       2 16 840 1 101 3 4 2 3 */
-&(nid_objs[675]),/* OBJ_sha224                       2 16 840 1 101 3 4 2 4 */
-&(nid_objs[71]),/* OBJ_netscape_cert_type           2 16 840 1 113730 1 1 */
-&(nid_objs[72]),/* OBJ_netscape_base_url            2 16 840 1 113730 1 2 */
-&(nid_objs[73]),/* OBJ_netscape_revocation_url      2 16 840 1 113730 1 3 */
-&(nid_objs[74]),/* OBJ_netscape_ca_revocation_url   2 16 840 1 113730 1 4 */
-&(nid_objs[75]),/* OBJ_netscape_renewal_url         2 16 840 1 113730 1 7 */
-&(nid_objs[76]),/* OBJ_netscape_ca_policy_url       2 16 840 1 113730 1 8 */
-&(nid_objs[77]),/* OBJ_netscape_ssl_server_name     2 16 840 1 113730 1 12 */
-&(nid_objs[78]),/* OBJ_netscape_comment             2 16 840 1 113730 1 13 */
-&(nid_objs[79]),/* OBJ_netscape_cert_sequence       2 16 840 1 113730 2 5 */
-&(nid_objs[139]),/* OBJ_ns_sgc                       2 16 840 1 113730 4 1 */
-&(nid_objs[458]),/* OBJ_userId                       0 9 2342 19200300 100 1 1 */
-&(nid_objs[459]),/* OBJ_textEncodedORAddress         0 9 2342 19200300 100 1 2 */
-&(nid_objs[460]),/* OBJ_rfc822Mailbox                0 9 2342 19200300 100 1 3 */
-&(nid_objs[461]),/* OBJ_info                         0 9 2342 19200300 100 1 4 */
-&(nid_objs[462]),/* OBJ_favouriteDrink               0 9 2342 19200300 100 1 5 */
-&(nid_objs[463]),/* OBJ_roomNumber                   0 9 2342 19200300 100 1 6 */
-&(nid_objs[464]),/* OBJ_photo                        0 9 2342 19200300 100 1 7 */
-&(nid_objs[465]),/* OBJ_userClass                    0 9 2342 19200300 100 1 8 */
-&(nid_objs[466]),/* OBJ_host                         0 9 2342 19200300 100 1 9 */
-&(nid_objs[467]),/* OBJ_manager                      0 9 2342 19200300 100 1 10 */
-&(nid_objs[468]),/* OBJ_documentIdentifier           0 9 2342 19200300 100 1 11 */
-&(nid_objs[469]),/* OBJ_documentTitle                0 9 2342 19200300 100 1 12 */
-&(nid_objs[470]),/* OBJ_documentVersion              0 9 2342 19200300 100 1 13 */
-&(nid_objs[471]),/* OBJ_documentAuthor               0 9 2342 19200300 100 1 14 */
-&(nid_objs[472]),/* OBJ_documentLocation             0 9 2342 19200300 100 1 15 */
-&(nid_objs[473]),/* OBJ_homeTelephoneNumber          0 9 2342 19200300 100 1 20 */
-&(nid_objs[474]),/* OBJ_secretary                    0 9 2342 19200300 100 1 21 */
-&(nid_objs[475]),/* OBJ_otherMailbox                 0 9 2342 19200300 100 1 22 */
-&(nid_objs[476]),/* OBJ_lastModifiedTime             0 9 2342 19200300 100 1 23 */
-&(nid_objs[477]),/* OBJ_lastModifiedBy               0 9 2342 19200300 100 1 24 */
-&(nid_objs[391]),/* OBJ_domainComponent              0 9 2342 19200300 100 1 25 */
-&(nid_objs[478]),/* OBJ_aRecord                      0 9 2342 19200300 100 1 26 */
-&(nid_objs[479]),/* OBJ_pilotAttributeType27         0 9 2342 19200300 100 1 27 */
-&(nid_objs[480]),/* OBJ_mXRecord                     0 9 2342 19200300 100 1 28 */
-&(nid_objs[481]),/* OBJ_nSRecord                     0 9 2342 19200300 100 1 29 */
-&(nid_objs[482]),/* OBJ_sOARecord                    0 9 2342 19200300 100 1 30 */
-&(nid_objs[483]),/* OBJ_cNAMERecord                  0 9 2342 19200300 100 1 31 */
-&(nid_objs[484]),/* OBJ_associatedDomain             0 9 2342 19200300 100 1 37 */
-&(nid_objs[485]),/* OBJ_associatedName               0 9 2342 19200300 100 1 38 */
-&(nid_objs[486]),/* OBJ_homePostalAddress            0 9 2342 19200300 100 1 39 */
-&(nid_objs[487]),/* OBJ_personalTitle                0 9 2342 19200300 100 1 40 */
-&(nid_objs[488]),/* OBJ_mobileTelephoneNumber        0 9 2342 19200300 100 1 41 */
-&(nid_objs[489]),/* OBJ_pagerTelephoneNumber         0 9 2342 19200300 100 1 42 */
-&(nid_objs[490]),/* OBJ_friendlyCountryName          0 9 2342 19200300 100 1 43 */
-&(nid_objs[491]),/* OBJ_organizationalStatus         0 9 2342 19200300 100 1 45 */
-&(nid_objs[492]),/* OBJ_janetMailbox                 0 9 2342 19200300 100 1 46 */
-&(nid_objs[493]),/* OBJ_mailPreferenceOption         0 9 2342 19200300 100 1 47 */
-&(nid_objs[494]),/* OBJ_buildingName                 0 9 2342 19200300 100 1 48 */
-&(nid_objs[495]),/* OBJ_dSAQuality                   0 9 2342 19200300 100 1 49 */
-&(nid_objs[496]),/* OBJ_singleLevelQuality           0 9 2342 19200300 100 1 50 */
-&(nid_objs[497]),/* OBJ_subtreeMinimumQuality        0 9 2342 19200300 100 1 51 */
-&(nid_objs[498]),/* OBJ_subtreeMaximumQuality        0 9 2342 19200300 100 1 52 */
-&(nid_objs[499]),/* OBJ_personalSignature            0 9 2342 19200300 100 1 53 */
-&(nid_objs[500]),/* OBJ_dITRedirect                  0 9 2342 19200300 100 1 54 */
-&(nid_objs[501]),/* OBJ_audio                        0 9 2342 19200300 100 1 55 */
-&(nid_objs[502]),/* OBJ_documentPublisher            0 9 2342 19200300 100 1 56 */
-&(nid_objs[442]),/* OBJ_iA5StringSyntax              0 9 2342 19200300 100 3 4 */
-&(nid_objs[443]),/* OBJ_caseIgnoreIA5StringSyntax    0 9 2342 19200300 100 3 5 */
-&(nid_objs[444]),/* OBJ_pilotObject                  0 9 2342 19200300 100 4 3 */
-&(nid_objs[445]),/* OBJ_pilotPerson                  0 9 2342 19200300 100 4 4 */
-&(nid_objs[446]),/* OBJ_account                      0 9 2342 19200300 100 4 5 */
-&(nid_objs[447]),/* OBJ_document                     0 9 2342 19200300 100 4 6 */
-&(nid_objs[448]),/* OBJ_room                         0 9 2342 19200300 100 4 7 */
-&(nid_objs[449]),/* OBJ_documentSeries               0 9 2342 19200300 100 4 9 */
-&(nid_objs[392]),/* OBJ_Domain                       0 9 2342 19200300 100 4 13 */
-&(nid_objs[450]),/* OBJ_rFC822localPart              0 9 2342 19200300 100 4 14 */
-&(nid_objs[451]),/* OBJ_dNSDomain                    0 9 2342 19200300 100 4 15 */
-&(nid_objs[452]),/* OBJ_domainRelatedObject          0 9 2342 19200300 100 4 17 */
-&(nid_objs[453]),/* OBJ_friendlyCountry              0 9 2342 19200300 100 4 18 */
-&(nid_objs[454]),/* OBJ_simpleSecurityObject         0 9 2342 19200300 100 4 19 */
-&(nid_objs[455]),/* OBJ_pilotOrganization            0 9 2342 19200300 100 4 20 */
-&(nid_objs[456]),/* OBJ_pilotDSA                     0 9 2342 19200300 100 4 21 */
-&(nid_objs[457]),/* OBJ_qualityLabelledData          0 9 2342 19200300 100 4 22 */
-&(nid_objs[189]),/* OBJ_id_smime_mod                 1 2 840 113549 1 9 16 0 */
-&(nid_objs[190]),/* OBJ_id_smime_ct                  1 2 840 113549 1 9 16 1 */
-&(nid_objs[191]),/* OBJ_id_smime_aa                  1 2 840 113549 1 9 16 2 */
-&(nid_objs[192]),/* OBJ_id_smime_alg                 1 2 840 113549 1 9 16 3 */
-&(nid_objs[193]),/* OBJ_id_smime_cd                  1 2 840 113549 1 9 16 4 */
-&(nid_objs[194]),/* OBJ_id_smime_spq                 1 2 840 113549 1 9 16 5 */
-&(nid_objs[195]),/* OBJ_id_smime_cti                 1 2 840 113549 1 9 16 6 */
-&(nid_objs[158]),/* OBJ_x509Certificate              1 2 840 113549 1 9 22 1 */
-&(nid_objs[159]),/* OBJ_sdsiCertificate              1 2 840 113549 1 9 22 2 */
-&(nid_objs[160]),/* OBJ_x509Crl                      1 2 840 113549 1 9 23 1 */
-&(nid_objs[144]),/* OBJ_pbe_WithSHA1And128BitRC4     1 2 840 113549 1 12 1 1 */
-&(nid_objs[145]),/* OBJ_pbe_WithSHA1And40BitRC4      1 2 840 113549 1 12 1 2 */
-&(nid_objs[146]),/* OBJ_pbe_WithSHA1And3_Key_TripleDES_CBC 1 2 840 113549 1 12 1 3 */
-&(nid_objs[147]),/* OBJ_pbe_WithSHA1And2_Key_TripleDES_CBC 1 2 840 113549 1 12 1 4 */
-&(nid_objs[148]),/* OBJ_pbe_WithSHA1And128BitRC2_CBC 1 2 840 113549 1 12 1 5 */
-&(nid_objs[149]),/* OBJ_pbe_WithSHA1And40BitRC2_CBC  1 2 840 113549 1 12 1 6 */
-&(nid_objs[171]),/* OBJ_ms_ext_req                   1 3 6 1 4 1 311 2 1 14 */
-&(nid_objs[134]),/* OBJ_ms_code_ind                  1 3 6 1 4 1 311 2 1 21 */
-&(nid_objs[135]),/* OBJ_ms_code_com                  1 3 6 1 4 1 311 2 1 22 */
-&(nid_objs[136]),/* OBJ_ms_ctl_sign                  1 3 6 1 4 1 311 10 3 1 */
-&(nid_objs[137]),/* OBJ_ms_sgc                       1 3 6 1 4 1 311 10 3 3 */
-&(nid_objs[138]),/* OBJ_ms_efs                       1 3 6 1 4 1 311 10 3 4 */
-&(nid_objs[648]),/* OBJ_ms_smartcard_login           1 3 6 1 4 1 311 20 2 2 */
-&(nid_objs[649]),/* OBJ_ms_upn                       1 3 6 1 4 1 311 20 2 3 */
-&(nid_objs[751]),/* OBJ_camellia_128_cbc             1 2 392 200011 61 1 1 1 2 */
-&(nid_objs[752]),/* OBJ_camellia_192_cbc             1 2 392 200011 61 1 1 1 3 */
-&(nid_objs[753]),/* OBJ_camellia_256_cbc             1 2 392 200011 61 1 1 1 4 */
-&(nid_objs[196]),/* OBJ_id_smime_mod_cms             1 2 840 113549 1 9 16 0 1 */
-&(nid_objs[197]),/* OBJ_id_smime_mod_ess             1 2 840 113549 1 9 16 0 2 */
-&(nid_objs[198]),/* OBJ_id_smime_mod_oid             1 2 840 113549 1 9 16 0 3 */
-&(nid_objs[199]),/* OBJ_id_smime_mod_msg_v3          1 2 840 113549 1 9 16 0 4 */
-&(nid_objs[200]),/* OBJ_id_smime_mod_ets_eSignature_88 1 2 840 113549 1 9 16 0 5 */
-&(nid_objs[201]),/* OBJ_id_smime_mod_ets_eSignature_97 1 2 840 113549 1 9 16 0 6 */
-&(nid_objs[202]),/* OBJ_id_smime_mod_ets_eSigPolicy_88 1 2 840 113549 1 9 16 0 7 */
-&(nid_objs[203]),/* OBJ_id_smime_mod_ets_eSigPolicy_97 1 2 840 113549 1 9 16 0 8 */
-&(nid_objs[204]),/* OBJ_id_smime_ct_receipt          1 2 840 113549 1 9 16 1 1 */
-&(nid_objs[205]),/* OBJ_id_smime_ct_authData         1 2 840 113549 1 9 16 1 2 */
-&(nid_objs[206]),/* OBJ_id_smime_ct_publishCert      1 2 840 113549 1 9 16 1 3 */
-&(nid_objs[207]),/* OBJ_id_smime_ct_TSTInfo          1 2 840 113549 1 9 16 1 4 */
-&(nid_objs[208]),/* OBJ_id_smime_ct_TDTInfo          1 2 840 113549 1 9 16 1 5 */
-&(nid_objs[209]),/* OBJ_id_smime_ct_contentInfo      1 2 840 113549 1 9 16 1 6 */
-&(nid_objs[210]),/* OBJ_id_smime_ct_DVCSRequestData  1 2 840 113549 1 9 16 1 7 */
-&(nid_objs[211]),/* OBJ_id_smime_ct_DVCSResponseData 1 2 840 113549 1 9 16 1 8 */
-&(nid_objs[212]),/* OBJ_id_smime_aa_receiptRequest   1 2 840 113549 1 9 16 2 1 */
-&(nid_objs[213]),/* OBJ_id_smime_aa_securityLabel    1 2 840 113549 1 9 16 2 2 */
-&(nid_objs[214]),/* OBJ_id_smime_aa_mlExpandHistory  1 2 840 113549 1 9 16 2 3 */
-&(nid_objs[215]),/* OBJ_id_smime_aa_contentHint      1 2 840 113549 1 9 16 2 4 */
-&(nid_objs[216]),/* OBJ_id_smime_aa_msgSigDigest     1 2 840 113549 1 9 16 2 5 */
-&(nid_objs[217]),/* OBJ_id_smime_aa_encapContentType 1 2 840 113549 1 9 16 2 6 */
-&(nid_objs[218]),/* OBJ_id_smime_aa_contentIdentifier 1 2 840 113549 1 9 16 2 7 */
-&(nid_objs[219]),/* OBJ_id_smime_aa_macValue         1 2 840 113549 1 9 16 2 8 */
-&(nid_objs[220]),/* OBJ_id_smime_aa_equivalentLabels 1 2 840 113549 1 9 16 2 9 */
-&(nid_objs[221]),/* OBJ_id_smime_aa_contentReference 1 2 840 113549 1 9 16 2 10 */
-&(nid_objs[222]),/* OBJ_id_smime_aa_encrypKeyPref    1 2 840 113549 1 9 16 2 11 */
-&(nid_objs[223]),/* OBJ_id_smime_aa_signingCertificate 1 2 840 113549 1 9 16 2 12 */
-&(nid_objs[224]),/* OBJ_id_smime_aa_smimeEncryptCerts 1 2 840 113549 1 9 16 2 13 */
-&(nid_objs[225]),/* OBJ_id_smime_aa_timeStampToken   1 2 840 113549 1 9 16 2 14 */
-&(nid_objs[226]),/* OBJ_id_smime_aa_ets_sigPolicyId  1 2 840 113549 1 9 16 2 15 */
-&(nid_objs[227]),/* OBJ_id_smime_aa_ets_commitmentType 1 2 840 113549 1 9 16 2 16 */
-&(nid_objs[228]),/* OBJ_id_smime_aa_ets_signerLocation 1 2 840 113549 1 9 16 2 17 */
-&(nid_objs[229]),/* OBJ_id_smime_aa_ets_signerAttr   1 2 840 113549 1 9 16 2 18 */
-&(nid_objs[230]),/* OBJ_id_smime_aa_ets_otherSigCert 1 2 840 113549 1 9 16 2 19 */
-&(nid_objs[231]),/* OBJ_id_smime_aa_ets_contentTimestamp 1 2 840 113549 1 9 16 2 20 */
-&(nid_objs[232]),/* OBJ_id_smime_aa_ets_CertificateRefs 1 2 840 113549 1 9 16 2 21 */
-&(nid_objs[233]),/* OBJ_id_smime_aa_ets_RevocationRefs 1 2 840 113549 1 9 16 2 22 */
-&(nid_objs[234]),/* OBJ_id_smime_aa_ets_certValues   1 2 840 113549 1 9 16 2 23 */
-&(nid_objs[235]),/* OBJ_id_smime_aa_ets_revocationValues 1 2 840 113549 1 9 16 2 24 */
-&(nid_objs[236]),/* OBJ_id_smime_aa_ets_escTimeStamp 1 2 840 113549 1 9 16 2 25 */
-&(nid_objs[237]),/* OBJ_id_smime_aa_ets_certCRLTimestamp 1 2 840 113549 1 9 16 2 26 */
-&(nid_objs[238]),/* OBJ_id_smime_aa_ets_archiveTimeStamp 1 2 840 113549 1 9 16 2 27 */
-&(nid_objs[239]),/* OBJ_id_smime_aa_signatureType    1 2 840 113549 1 9 16 2 28 */
-&(nid_objs[240]),/* OBJ_id_smime_aa_dvcs_dvc         1 2 840 113549 1 9 16 2 29 */
-&(nid_objs[241]),/* OBJ_id_smime_alg_ESDHwith3DES    1 2 840 113549 1 9 16 3 1 */
-&(nid_objs[242]),/* OBJ_id_smime_alg_ESDHwithRC2     1 2 840 113549 1 9 16 3 2 */
-&(nid_objs[243]),/* OBJ_id_smime_alg_3DESwrap        1 2 840 113549 1 9 16 3 3 */
-&(nid_objs[244]),/* OBJ_id_smime_alg_RC2wrap         1 2 840 113549 1 9 16 3 4 */
-&(nid_objs[245]),/* OBJ_id_smime_alg_ESDH            1 2 840 113549 1 9 16 3 5 */
-&(nid_objs[246]),/* OBJ_id_smime_alg_CMS3DESwrap     1 2 840 113549 1 9 16 3 6 */
-&(nid_objs[247]),/* OBJ_id_smime_alg_CMSRC2wrap      1 2 840 113549 1 9 16 3 7 */
-&(nid_objs[248]),/* OBJ_id_smime_cd_ldap             1 2 840 113549 1 9 16 4 1 */
-&(nid_objs[249]),/* OBJ_id_smime_spq_ets_sqt_uri     1 2 840 113549 1 9 16 5 1 */
-&(nid_objs[250]),/* OBJ_id_smime_spq_ets_sqt_unotice 1 2 840 113549 1 9 16 5 2 */
-&(nid_objs[251]),/* OBJ_id_smime_cti_ets_proofOfOrigin 1 2 840 113549 1 9 16 6 1 */
-&(nid_objs[252]),/* OBJ_id_smime_cti_ets_proofOfReceipt 1 2 840 113549 1 9 16 6 2 */
-&(nid_objs[253]),/* OBJ_id_smime_cti_ets_proofOfDelivery 1 2 840 113549 1 9 16 6 3 */
-&(nid_objs[254]),/* OBJ_id_smime_cti_ets_proofOfSender 1 2 840 113549 1 9 16 6 4 */
-&(nid_objs[255]),/* OBJ_id_smime_cti_ets_proofOfApproval 1 2 840 113549 1 9 16 6 5 */
-&(nid_objs[256]),/* OBJ_id_smime_cti_ets_proofOfCreation 1 2 840 113549 1 9 16 6 6 */
-&(nid_objs[150]),/* OBJ_keyBag                       1 2 840 113549 1 12 10 1 1 */
-&(nid_objs[151]),/* OBJ_pkcs8ShroudedKeyBag          1 2 840 113549 1 12 10 1 2 */
-&(nid_objs[152]),/* OBJ_certBag                      1 2 840 113549 1 12 10 1 3 */
-&(nid_objs[153]),/* OBJ_crlBag                       1 2 840 113549 1 12 10 1 4 */
-&(nid_objs[154]),/* OBJ_secretBag                    1 2 840 113549 1 12 10 1 5 */
-&(nid_objs[155]),/* OBJ_safeContentsBag              1 2 840 113549 1 12 10 1 6 */
-&(nid_objs[34]),/* OBJ_idea_cbc                     1 3 6 1 4 1 188 7 1 1 2 */
-};
-
diff --git a/crypto/openssl/crypto/objects/obj_dat.pl b/crypto/openssl/crypto/objects/obj_dat.pl
deleted file mode 100644
index 8a09a46ee659..000000000000
--- a/crypto/openssl/crypto/objects/obj_dat.pl
+++ /dev/null
@@ -1,307 +0,0 @@
-#!/usr/local/bin/perl
-
-# fixes bug in floating point emulation on sparc64 when
-# this script produces off-by-one output on sparc64
-use integer;
-
-sub obj_cmp
-	{
-	local(@a,@b,$_,$r);
-
-	$A=$obj_len{$obj{$nid{$a}}};
-	$B=$obj_len{$obj{$nid{$b}}};
-
-	$r=($A-$B);
-	return($r) if $r != 0;
-
-	$A=$obj_der{$obj{$nid{$a}}};
-	$B=$obj_der{$obj{$nid{$b}}};
-
-	return($A cmp $B);
-	}
-
-sub expand_obj
-	{
-	local(*v)=@_;
-	local($k,$d);
-	local($i);
-
-	do	{
-		$i=0;
-		foreach $k (keys %v)
-			{
-			if (($v{$k} =~ s/(OBJ_[^,]+),/$v{$1},/))
-				{ $i++; }
-			}
-		} while($i);
-	foreach $k (keys %v)
-		{
-		@a=split(/,/,$v{$k});
-		$objn{$k}=$#a+1;
-		}
-	return(%objn);
-	}
-
-open (IN,"$ARGV[0]") || die "Can't open input file $ARGV[0]";
-open (OUT,">$ARGV[1]") || die "Can't open output file $ARGV[1]";
-
-while (<IN>)
-	{
-	next unless /^\#define\s+(\S+)\s+(.*)$/;
-	$v=$1;
-	$d=$2;
-	$d =~ s/^\"//;
-	$d =~ s/\"$//;
-	if ($v =~ /^SN_(.*)$/)
-		{
-		if(defined $snames{$d})
-			{
-			print "WARNING: Duplicate short name \"$d\"\n";
-			}
-		else 
-			{ $snames{$d} = "X"; }
-		$sn{$1}=$d;
-		}
-	elsif ($v =~ /^LN_(.*)$/)
-		{
-		if(defined $lnames{$d})
-			{
-			print "WARNING: Duplicate long name \"$d\"\n";
-			}
-		else 
-			{ $lnames{$d} = "X"; }
-		$ln{$1}=$d;
-		}
-	elsif ($v =~ /^NID_(.*)$/)
-		{ $nid{$d}=$1; }
-	elsif ($v =~ /^OBJ_(.*)$/)
-		{
-		$obj{$1}=$v;
-		$objd{$v}=$d;
-		}
-	}
-close IN;
-
-%ob=&expand_obj(*objd);
-
-@a=sort { $a <=> $b } keys %nid;
-$n=$a[$#a]+1;
-
-@lvalues=();
-$lvalues=0;
-
-for ($i=0; $i<$n; $i++)
-	{
-	if (!defined($nid{$i}))
-		{
-		push(@out,"{NULL,NULL,NID_undef,0,NULL,0},\n");
-		}
-	else
-		{
-		$sn=defined($sn{$nid{$i}})?"$sn{$nid{$i}}":"NULL";
-		$ln=defined($ln{$nid{$i}})?"$ln{$nid{$i}}":"NULL";
-
-		if ($sn eq "NULL") {
-			$sn=$ln;
-			$sn{$nid{$i}} = $ln;
-		}
-
-		if ($ln eq "NULL") {
-			$ln=$sn;
-			$ln{$nid{$i}} = $sn;
-		}
-			
-		$out ="{";
-		$out.="\"$sn\"";
-		$out.=","."\"$ln\"";
-		$out.=",NID_$nid{$i},";
-		if (defined($obj{$nid{$i}}))
-			{
-			$v=$objd{$obj{$nid{$i}}};
-			$v =~ s/L//g;
-			$v =~ s/,/ /g;
-			$r=&der_it($v);
-			$z="";
-			$length=0;
-			foreach (unpack("C*",$r))
-				{
-				$z.=sprintf("0x%02X,",$_);
-				$length++;
-				}
-			$obj_der{$obj{$nid{$i}}}=$z;
-			$obj_len{$obj{$nid{$i}}}=$length;
-
-			push(@lvalues,sprintf("%-45s/* [%3d] %s */\n",
-				$z,$lvalues,$obj{$nid{$i}}));
-			$out.="$length,&(lvalues[$lvalues]),0";
-			$lvalues+=$length;
-			}
-		else
-			{
-			$out.="0,NULL,0";
-			}
-		$out.="},\n";
-		push(@out,$out);
-		}
-	}
-
-@a=grep(defined($sn{$nid{$_}}),0 .. $n);
-foreach (sort { $sn{$nid{$a}} cmp $sn{$nid{$b}} } @a)
-	{
-	push(@sn,sprintf("&(nid_objs[%2d]),/* \"$sn{$nid{$_}}\" */\n",$_));
-	}
-
-@a=grep(defined($ln{$nid{$_}}),0 .. $n);
-foreach (sort { $ln{$nid{$a}} cmp $ln{$nid{$b}} } @a)
-	{
-	push(@ln,sprintf("&(nid_objs[%2d]),/* \"$ln{$nid{$_}}\" */\n",$_));
-	}
-
-@a=grep(defined($obj{$nid{$_}}),0 .. $n);
-foreach (sort obj_cmp @a)
-	{
-	$m=$obj{$nid{$_}};
-	$v=$objd{$m};
-	$v =~ s/L//g;
-	$v =~ s/,/ /g;
-	push(@ob,sprintf("&(nid_objs[%2d]),/* %-32s %s */\n",$_,$m,$v));
-	}
-
-print OUT <<'EOF';
-/* crypto/objects/obj_dat.h */
-
-/* THIS FILE IS GENERATED FROM objects.h by obj_dat.pl via the
- * following command:
- * perl obj_dat.pl obj_mac.h obj_dat.h
- */
-
-/* Copyright (C) 1995-1997 Eric Young (eay@cryptsoft.com)
- * All rights reserved.
- *
- * This package is an SSL implementation written
- * by Eric Young (eay@cryptsoft.com).
- * The implementation was written so as to conform with Netscapes SSL.
- * 
- * This library is free for commercial and non-commercial use as long as
- * the following conditions are aheared to.  The following conditions
- * apply to all code found in this distribution, be it the RC4, RSA,
- * lhash, DES, etc., code; not just the SSL code.  The SSL documentation
- * included with this distribution is covered by the same copyright terms
- * except that the holder is Tim Hudson (tjh@cryptsoft.com).
- * 
- * Copyright remains Eric Young's, and as such any Copyright notices in
- * the code are not to be removed.
- * If this package is used in a product, Eric Young should be given attribution
- * as the author of the parts of the library used.
- * This can be in the form of a textual message at program startup or
- * in documentation (online or textual) provided with the package.
- * 
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions
- * are met:
- * 1. Redistributions of source code must retain the copyright
- *    notice, this list of conditions and the following disclaimer.
- * 2. Redistributions in binary form must reproduce the above copyright
- *    notice, this list of conditions and the following disclaimer in the
- *    documentation and/or other materials provided with the distribution.
- * 3. All advertising materials mentioning features or use of this software
- *    must display the following acknowledgement:
- *    "This product includes cryptographic software written by
- *     Eric Young (eay@cryptsoft.com)"
- *    The word 'cryptographic' can be left out if the rouines from the library
- *    being used are not cryptographic related :-).
- * 4. If you include any Windows specific code (or a derivative thereof) from 
- *    the apps directory (application code) you must include an acknowledgement:
- *    "This product includes software written by Tim Hudson (tjh@cryptsoft.com)"
- * 
- * THIS SOFTWARE IS PROVIDED BY ERIC YOUNG ``AS IS'' AND
- * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
- * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
- * ARE DISCLAIMED.  IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE
- * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
- * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
- * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
- * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
- * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
- * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
- * SUCH DAMAGE.
- * 
- * The licence and distribution terms for any publically available version or
- * derivative of this code cannot be changed.  i.e. this code cannot simply be
- * copied and put under another distribution licence
- * [including the GNU Public Licence.]
- */
-
-EOF
-
-printf OUT "#define NUM_NID %d\n",$n;
-printf OUT "#define NUM_SN %d\n",$#sn+1;
-printf OUT "#define NUM_LN %d\n",$#ln+1;
-printf OUT "#define NUM_OBJ %d\n\n",$#ob+1;
-
-printf OUT "static unsigned char lvalues[%d]={\n",$lvalues+1;
-print OUT @lvalues;
-print OUT "};\n\n";
-
-printf OUT "static ASN1_OBJECT nid_objs[NUM_NID]={\n";
-foreach (@out)
-	{
-	if (length($_) > 75)
-		{
-		$out="";
-		foreach (split(/,/))
-			{
-			$t=$out.$_.",";
-			if (length($t) > 70)
-				{
-				print OUT "$out\n";
-				$t="\t$_,";
-				}
-			$out=$t;
-			}
-		chop $out;
-		print OUT "$out";
-		}
-	else
-		{ print OUT $_; }
-	}
-print  OUT "};\n\n";
-
-printf OUT "static ASN1_OBJECT *sn_objs[NUM_SN]={\n";
-print  OUT @sn;
-print  OUT "};\n\n";
-
-printf OUT "static ASN1_OBJECT *ln_objs[NUM_LN]={\n";
-print  OUT @ln;
-print  OUT "};\n\n";
-
-printf OUT "static ASN1_OBJECT *obj_objs[NUM_OBJ]={\n";
-print  OUT @ob;
-print  OUT "};\n\n";
-
-close OUT;
-
-sub der_it
-	{
-	local($v)=@_;
-	local(@a,$i,$ret,@r);
-
-	@a=split(/\s+/,$v);
-	$ret.=pack("C*",$a[0]*40+$a[1]);
-	shift @a;
-	shift @a;
-	foreach (@a)
-		{
-		@r=();
-		$t=0;
-		while ($_ >= 128)
-			{
-			$x=$_%128;
-			$_/=128;
-			push(@r,((($t++)?0x80:0)|$x));
-			}
-		push(@r,((($t++)?0x80:0)|$_));
-		$ret.=pack("C*",reverse(@r));
-		}
-	return($ret);
-	}
diff --git a/crypto/openssl/crypto/objects/obj_err.c b/crypto/openssl/crypto/objects/obj_err.c
deleted file mode 100644
index 12b48850c6bc..000000000000
--- a/crypto/openssl/crypto/objects/obj_err.c
+++ /dev/null
@@ -1,102 +0,0 @@
-/* crypto/objects/obj_err.c */
-/* ====================================================================
- * Copyright (c) 1999-2005 The OpenSSL Project.  All rights reserved.
- *
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions
- * are met:
- *
- * 1. Redistributions of source code must retain the above copyright
- *    notice, this list of conditions and the following disclaimer. 
- *
- * 2. Redistributions in binary form must reproduce the above copyright
- *    notice, this list of conditions and the following disclaimer in
- *    the documentation and/or other materials provided with the
- *    distribution.
- *
- * 3. All advertising materials mentioning features or use of this
- *    software must display the following acknowledgment:
- *    "This product includes software developed by the OpenSSL Project
- *    for use in the OpenSSL Toolkit. (http://www.OpenSSL.org/)"
- *
- * 4. The names "OpenSSL Toolkit" and "OpenSSL Project" must not be used to
- *    endorse or promote products derived from this software without
- *    prior written permission. For written permission, please contact
- *    openssl-core@OpenSSL.org.
- *
- * 5. Products derived from this software may not be called "OpenSSL"
- *    nor may "OpenSSL" appear in their names without prior written
- *    permission of the OpenSSL Project.
- *
- * 6. Redistributions of any form whatsoever must retain the following
- *    acknowledgment:
- *    "This product includes software developed by the OpenSSL Project
- *    for use in the OpenSSL Toolkit (http://www.OpenSSL.org/)"
- *
- * THIS SOFTWARE IS PROVIDED BY THE OpenSSL PROJECT ``AS IS'' AND ANY
- * EXPRESSED OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
- * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR
- * PURPOSE ARE DISCLAIMED.  IN NO EVENT SHALL THE OpenSSL PROJECT OR
- * ITS CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
- * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
- * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
- * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
- * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
- * STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
- * ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED
- * OF THE POSSIBILITY OF SUCH DAMAGE.
- * ====================================================================
- *
- * This product includes cryptographic software written by Eric Young
- * (eay@cryptsoft.com).  This product includes software written by Tim
- * Hudson (tjh@cryptsoft.com).
- *
- */
-
-/* NOTE: this file was auto generated by the mkerr.pl script: any changes
- * made to it will be overwritten when the script next updates this file,
- * only reason strings will be preserved.
- */
-
-#include <stdio.h>
-#include <openssl/err.h>
-#include <openssl/objects.h>
-
-/* BEGIN ERROR CODES */
-#ifndef OPENSSL_NO_ERR
-
-#define ERR_FUNC(func) ERR_PACK(ERR_LIB_OBJ,func,0)
-#define ERR_REASON(reason) ERR_PACK(ERR_LIB_OBJ,0,reason)
-
-static ERR_STRING_DATA OBJ_str_functs[]=
-	{
-{ERR_FUNC(OBJ_F_OBJ_ADD_OBJECT),	"OBJ_add_object"},
-{ERR_FUNC(OBJ_F_OBJ_CREATE),	"OBJ_create"},
-{ERR_FUNC(OBJ_F_OBJ_DUP),	"OBJ_dup"},
-{ERR_FUNC(OBJ_F_OBJ_NAME_NEW_INDEX),	"OBJ_NAME_new_index"},
-{ERR_FUNC(OBJ_F_OBJ_NID2LN),	"OBJ_nid2ln"},
-{ERR_FUNC(OBJ_F_OBJ_NID2OBJ),	"OBJ_nid2obj"},
-{ERR_FUNC(OBJ_F_OBJ_NID2SN),	"OBJ_nid2sn"},
-{0,NULL}
-	};
-
-static ERR_STRING_DATA OBJ_str_reasons[]=
-	{
-{ERR_REASON(OBJ_R_MALLOC_FAILURE)        ,"malloc failure"},
-{ERR_REASON(OBJ_R_UNKNOWN_NID)           ,"unknown nid"},
-{0,NULL}
-	};
-
-#endif
-
-void ERR_load_OBJ_strings(void)
-	{
-#ifndef OPENSSL_NO_ERR
-
-	if (ERR_func_error_string(OBJ_str_functs[0].error) == NULL)
-		{
-		ERR_load_strings(0,OBJ_str_functs);
-		ERR_load_strings(0,OBJ_str_reasons);
-		}
-#endif
-	}
diff --git a/crypto/openssl/crypto/objects/obj_lib.c b/crypto/openssl/crypto/objects/obj_lib.c
deleted file mode 100644
index 706fa0b0e78c..000000000000
--- a/crypto/openssl/crypto/objects/obj_lib.c
+++ /dev/null
@@ -1,128 +0,0 @@
-/* crypto/objects/obj_lib.c */
-/* Copyright (C) 1995-1998 Eric Young (eay@cryptsoft.com)
- * All rights reserved.
- *
- * This package is an SSL implementation written
- * by Eric Young (eay@cryptsoft.com).
- * The implementation was written so as to conform with Netscapes SSL.
- * 
- * This library is free for commercial and non-commercial use as long as
- * the following conditions are aheared to.  The following conditions
- * apply to all code found in this distribution, be it the RC4, RSA,
- * lhash, DES, etc., code; not just the SSL code.  The SSL documentation
- * included with this distribution is covered by the same copyright terms
- * except that the holder is Tim Hudson (tjh@cryptsoft.com).
- * 
- * Copyright remains Eric Young's, and as such any Copyright notices in
- * the code are not to be removed.
- * If this package is used in a product, Eric Young should be given attribution
- * as the author of the parts of the library used.
- * This can be in the form of a textual message at program startup or
- * in documentation (online or textual) provided with the package.
- * 
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions
- * are met:
- * 1. Redistributions of source code must retain the copyright
- *    notice, this list of conditions and the following disclaimer.
- * 2. Redistributions in binary form must reproduce the above copyright
- *    notice, this list of conditions and the following disclaimer in the
- *    documentation and/or other materials provided with the distribution.
- * 3. All advertising materials mentioning features or use of this software
- *    must display the following acknowledgement:
- *    "This product includes cryptographic software written by
- *     Eric Young (eay@cryptsoft.com)"
- *    The word 'cryptographic' can be left out if the rouines from the library
- *    being used are not cryptographic related :-).
- * 4. If you include any Windows specific code (or a derivative thereof) from 
- *    the apps directory (application code) you must include an acknowledgement:
- *    "This product includes software written by Tim Hudson (tjh@cryptsoft.com)"
- * 
- * THIS SOFTWARE IS PROVIDED BY ERIC YOUNG ``AS IS'' AND
- * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
- * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
- * ARE DISCLAIMED.  IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE
- * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
- * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
- * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
- * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
- * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
- * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
- * SUCH DAMAGE.
- * 
- * The licence and distribution terms for any publically available version or
- * derivative of this code cannot be changed.  i.e. this code cannot simply be
- * copied and put under another distribution licence
- * [including the GNU Public Licence.]
- */
-
-#include <stdio.h>
-#include "cryptlib.h"
-#include <openssl/lhash.h>
-#include <openssl/objects.h>
-#include <openssl/buffer.h>
-
-ASN1_OBJECT *OBJ_dup(const ASN1_OBJECT *o)
-	{
-	ASN1_OBJECT *r;
-	int i;
-	char *ln=NULL;
-
-	if (o == NULL) return(NULL);
-	if (!(o->flags & ASN1_OBJECT_FLAG_DYNAMIC))
-		return((ASN1_OBJECT *)o); /* XXX: ugh! Why? What kind of
-					     duplication is this??? */
-
-	r=ASN1_OBJECT_new();
-	if (r == NULL)
-		{
-		OBJerr(OBJ_F_OBJ_DUP,ERR_R_ASN1_LIB);
-		return(NULL);
-		}
-	r->data=OPENSSL_malloc(o->length);
-	if (r->data == NULL)
-		goto err;
-	if (o->data != NULL)
-		memcpy(r->data,o->data,o->length);
-	r->length=o->length;
-	r->nid=o->nid;
-	r->ln=r->sn=NULL;
-	if (o->ln != NULL)
-		{
-		i=strlen(o->ln)+1;
-		r->ln=ln=OPENSSL_malloc(i);
-		if (r->ln == NULL) goto err;
-		memcpy(ln,o->ln,i);
-		}
-
-	if (o->sn != NULL)
-		{
-		char *s;
-
-		i=strlen(o->sn)+1;
-		r->sn=s=OPENSSL_malloc(i);
-		if (r->sn == NULL) goto err;
-		memcpy(s,o->sn,i);
-		}
-	r->flags=o->flags|(ASN1_OBJECT_FLAG_DYNAMIC|
-		ASN1_OBJECT_FLAG_DYNAMIC_STRINGS|ASN1_OBJECT_FLAG_DYNAMIC_DATA);
-	return(r);
-err:
-	OBJerr(OBJ_F_OBJ_DUP,ERR_R_MALLOC_FAILURE);
-	if (r != NULL)
-		{
-		if (ln != NULL) OPENSSL_free(ln);
-		if (r->data != NULL) OPENSSL_free(r->data);
-		OPENSSL_free(r);
-		}
-	return(NULL);
-	}
-
-int OBJ_cmp(const ASN1_OBJECT *a, const ASN1_OBJECT *b)
-	{
-	int ret;
-
-	ret=(a->length-b->length);
-	if (ret) return(ret);
-	return(memcmp(a->data,b->data,a->length));
-	}
diff --git a/crypto/openssl/crypto/objects/obj_mac.h b/crypto/openssl/crypto/objects/obj_mac.h
deleted file mode 100644
index f447bbe69af8..000000000000
--- a/crypto/openssl/crypto/objects/obj_mac.h
+++ /dev/null
@@ -1,3408 +0,0 @@
-/* crypto/objects/obj_mac.h */
-
-/* THIS FILE IS GENERATED FROM objects.txt by objects.pl via the
- * following command:
- * perl objects.pl objects.txt obj_mac.num obj_mac.h
- */
-
-/* Copyright (C) 1995-1997 Eric Young (eay@cryptsoft.com)
- * All rights reserved.
- *
- * This package is an SSL implementation written
- * by Eric Young (eay@cryptsoft.com).
- * The implementation was written so as to conform with Netscapes SSL.
- * 
- * This library is free for commercial and non-commercial use as long as
- * the following conditions are aheared to.  The following conditions
- * apply to all code found in this distribution, be it the RC4, RSA,
- * lhash, DES, etc., code; not just the SSL code.  The SSL documentation
- * included with this distribution is covered by the same copyright terms
- * except that the holder is Tim Hudson (tjh@cryptsoft.com).
- * 
- * Copyright remains Eric Young's, and as such any Copyright notices in
- * the code are not to be removed.
- * If this package is used in a product, Eric Young should be given attribution
- * as the author of the parts of the library used.
- * This can be in the form of a textual message at program startup or
- * in documentation (online or textual) provided with the package.
- * 
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions
- * are met:
- * 1. Redistributions of source code must retain the copyright
- *    notice, this list of conditions and the following disclaimer.
- * 2. Redistributions in binary form must reproduce the above copyright
- *    notice, this list of conditions and the following disclaimer in the
- *    documentation and/or other materials provided with the distribution.
- * 3. All advertising materials mentioning features or use of this software
- *    must display the following acknowledgement:
- *    "This product includes cryptographic software written by
- *     Eric Young (eay@cryptsoft.com)"
- *    The word 'cryptographic' can be left out if the rouines from the library
- *    being used are not cryptographic related :-).
- * 4. If you include any Windows specific code (or a derivative thereof) from 
- *    the apps directory (application code) you must include an acknowledgement:
- *    "This product includes software written by Tim Hudson (tjh@cryptsoft.com)"
- * 
- * THIS SOFTWARE IS PROVIDED BY ERIC YOUNG ``AS IS'' AND
- * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
- * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
- * ARE DISCLAIMED.  IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE
- * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
- * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
- * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
- * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
- * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
- * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
- * SUCH DAMAGE.
- * 
- * The licence and distribution terms for any publically available version or
- * derivative of this code cannot be changed.  i.e. this code cannot simply be
- * copied and put under another distribution licence
- * [including the GNU Public Licence.]
- */
-
-#define SN_undef			"UNDEF"
-#define LN_undef			"undefined"
-#define NID_undef			0
-#define OBJ_undef			0L
-
-#define SN_itu_t		"ITU-T"
-#define LN_itu_t		"itu-t"
-#define NID_itu_t		645
-#define OBJ_itu_t		0L
-
-#define NID_ccitt		404
-#define OBJ_ccitt		OBJ_itu_t
-
-#define SN_iso		"ISO"
-#define LN_iso		"iso"
-#define NID_iso		181
-#define OBJ_iso		1L
-
-#define SN_joint_iso_itu_t		"JOINT-ISO-ITU-T"
-#define LN_joint_iso_itu_t		"joint-iso-itu-t"
-#define NID_joint_iso_itu_t		646
-#define OBJ_joint_iso_itu_t		2L
-
-#define NID_joint_iso_ccitt		393
-#define OBJ_joint_iso_ccitt		OBJ_joint_iso_itu_t
-
-#define SN_member_body		"member-body"
-#define LN_member_body		"ISO Member Body"
-#define NID_member_body		182
-#define OBJ_member_body		OBJ_iso,2L
-
-#define SN_identified_organization		"identified-organization"
-#define NID_identified_organization		676
-#define OBJ_identified_organization		OBJ_iso,3L
-
-#define SN_certicom_arc		"certicom-arc"
-#define NID_certicom_arc		677
-#define OBJ_certicom_arc		OBJ_identified_organization,132L
-
-#define SN_international_organizations		"international-organizations"
-#define LN_international_organizations		"International Organizations"
-#define NID_international_organizations		647
-#define OBJ_international_organizations		OBJ_joint_iso_itu_t,23L
-
-#define SN_wap		"wap"
-#define NID_wap		678
-#define OBJ_wap		OBJ_international_organizations,43L
-
-#define SN_wap_wsg		"wap-wsg"
-#define NID_wap_wsg		679
-#define OBJ_wap_wsg		OBJ_wap,13L
-
-#define SN_selected_attribute_types		"selected-attribute-types"
-#define LN_selected_attribute_types		"Selected Attribute Types"
-#define NID_selected_attribute_types		394
-#define OBJ_selected_attribute_types		OBJ_joint_iso_itu_t,5L,1L,5L
-
-#define SN_clearance		"clearance"
-#define NID_clearance		395
-#define OBJ_clearance		OBJ_selected_attribute_types,55L
-
-#define SN_ISO_US		"ISO-US"
-#define LN_ISO_US		"ISO US Member Body"
-#define NID_ISO_US		183
-#define OBJ_ISO_US		OBJ_member_body,840L
-
-#define SN_X9_57		"X9-57"
-#define LN_X9_57		"X9.57"
-#define NID_X9_57		184
-#define OBJ_X9_57		OBJ_ISO_US,10040L
-
-#define SN_X9cm		"X9cm"
-#define LN_X9cm		"X9.57 CM ?"
-#define NID_X9cm		185
-#define OBJ_X9cm		OBJ_X9_57,4L
-
-#define SN_dsa		"DSA"
-#define LN_dsa		"dsaEncryption"
-#define NID_dsa		116
-#define OBJ_dsa		OBJ_X9cm,1L
-
-#define SN_dsaWithSHA1		"DSA-SHA1"
-#define LN_dsaWithSHA1		"dsaWithSHA1"
-#define NID_dsaWithSHA1		113
-#define OBJ_dsaWithSHA1		OBJ_X9cm,3L
-
-#define SN_ansi_X9_62		"ansi-X9-62"
-#define LN_ansi_X9_62		"ANSI X9.62"
-#define NID_ansi_X9_62		405
-#define OBJ_ansi_X9_62		OBJ_ISO_US,10045L
-
-#define OBJ_X9_62_id_fieldType		OBJ_ansi_X9_62,1L
-
-#define SN_X9_62_prime_field		"prime-field"
-#define NID_X9_62_prime_field		406
-#define OBJ_X9_62_prime_field		OBJ_X9_62_id_fieldType,1L
-
-#define SN_X9_62_characteristic_two_field		"characteristic-two-field"
-#define NID_X9_62_characteristic_two_field		407
-#define OBJ_X9_62_characteristic_two_field		OBJ_X9_62_id_fieldType,2L
-
-#define SN_X9_62_id_characteristic_two_basis		"id-characteristic-two-basis"
-#define NID_X9_62_id_characteristic_two_basis		680
-#define OBJ_X9_62_id_characteristic_two_basis		OBJ_X9_62_characteristic_two_field,3L
-
-#define SN_X9_62_onBasis		"onBasis"
-#define NID_X9_62_onBasis		681
-#define OBJ_X9_62_onBasis		OBJ_X9_62_id_characteristic_two_basis,1L
-
-#define SN_X9_62_tpBasis		"tpBasis"
-#define NID_X9_62_tpBasis		682
-#define OBJ_X9_62_tpBasis		OBJ_X9_62_id_characteristic_two_basis,2L
-
-#define SN_X9_62_ppBasis		"ppBasis"
-#define NID_X9_62_ppBasis		683
-#define OBJ_X9_62_ppBasis		OBJ_X9_62_id_characteristic_two_basis,3L
-
-#define OBJ_X9_62_id_publicKeyType		OBJ_ansi_X9_62,2L
-
-#define SN_X9_62_id_ecPublicKey		"id-ecPublicKey"
-#define NID_X9_62_id_ecPublicKey		408
-#define OBJ_X9_62_id_ecPublicKey		OBJ_X9_62_id_publicKeyType,1L
-
-#define OBJ_X9_62_ellipticCurve		OBJ_ansi_X9_62,3L
-
-#define OBJ_X9_62_c_TwoCurve		OBJ_X9_62_ellipticCurve,0L
-
-#define SN_X9_62_c2pnb163v1		"c2pnb163v1"
-#define NID_X9_62_c2pnb163v1		684
-#define OBJ_X9_62_c2pnb163v1		OBJ_X9_62_c_TwoCurve,1L
-
-#define SN_X9_62_c2pnb163v2		"c2pnb163v2"
-#define NID_X9_62_c2pnb163v2		685
-#define OBJ_X9_62_c2pnb163v2		OBJ_X9_62_c_TwoCurve,2L
-
-#define SN_X9_62_c2pnb163v3		"c2pnb163v3"
-#define NID_X9_62_c2pnb163v3		686
-#define OBJ_X9_62_c2pnb163v3		OBJ_X9_62_c_TwoCurve,3L
-
-#define SN_X9_62_c2pnb176v1		"c2pnb176v1"
-#define NID_X9_62_c2pnb176v1		687
-#define OBJ_X9_62_c2pnb176v1		OBJ_X9_62_c_TwoCurve,4L
-
-#define SN_X9_62_c2tnb191v1		"c2tnb191v1"
-#define NID_X9_62_c2tnb191v1		688
-#define OBJ_X9_62_c2tnb191v1		OBJ_X9_62_c_TwoCurve,5L
-
-#define SN_X9_62_c2tnb191v2		"c2tnb191v2"
-#define NID_X9_62_c2tnb191v2		689
-#define OBJ_X9_62_c2tnb191v2		OBJ_X9_62_c_TwoCurve,6L
-
-#define SN_X9_62_c2tnb191v3		"c2tnb191v3"
-#define NID_X9_62_c2tnb191v3		690
-#define OBJ_X9_62_c2tnb191v3		OBJ_X9_62_c_TwoCurve,7L
-
-#define SN_X9_62_c2onb191v4		"c2onb191v4"
-#define NID_X9_62_c2onb191v4		691
-#define OBJ_X9_62_c2onb191v4		OBJ_X9_62_c_TwoCurve,8L
-
-#define SN_X9_62_c2onb191v5		"c2onb191v5"
-#define NID_X9_62_c2onb191v5		692
-#define OBJ_X9_62_c2onb191v5		OBJ_X9_62_c_TwoCurve,9L
-
-#define SN_X9_62_c2pnb208w1		"c2pnb208w1"
-#define NID_X9_62_c2pnb208w1		693
-#define OBJ_X9_62_c2pnb208w1		OBJ_X9_62_c_TwoCurve,10L
-
-#define SN_X9_62_c2tnb239v1		"c2tnb239v1"
-#define NID_X9_62_c2tnb239v1		694
-#define OBJ_X9_62_c2tnb239v1		OBJ_X9_62_c_TwoCurve,11L
-
-#define SN_X9_62_c2tnb239v2		"c2tnb239v2"
-#define NID_X9_62_c2tnb239v2		695
-#define OBJ_X9_62_c2tnb239v2		OBJ_X9_62_c_TwoCurve,12L
-
-#define SN_X9_62_c2tnb239v3		"c2tnb239v3"
-#define NID_X9_62_c2tnb239v3		696
-#define OBJ_X9_62_c2tnb239v3		OBJ_X9_62_c_TwoCurve,13L
-
-#define SN_X9_62_c2onb239v4		"c2onb239v4"
-#define NID_X9_62_c2onb239v4		697
-#define OBJ_X9_62_c2onb239v4		OBJ_X9_62_c_TwoCurve,14L
-
-#define SN_X9_62_c2onb239v5		"c2onb239v5"
-#define NID_X9_62_c2onb239v5		698
-#define OBJ_X9_62_c2onb239v5		OBJ_X9_62_c_TwoCurve,15L
-
-#define SN_X9_62_c2pnb272w1		"c2pnb272w1"
-#define NID_X9_62_c2pnb272w1		699
-#define OBJ_X9_62_c2pnb272w1		OBJ_X9_62_c_TwoCurve,16L
-
-#define SN_X9_62_c2pnb304w1		"c2pnb304w1"
-#define NID_X9_62_c2pnb304w1		700
-#define OBJ_X9_62_c2pnb304w1		OBJ_X9_62_c_TwoCurve,17L
-
-#define SN_X9_62_c2tnb359v1		"c2tnb359v1"
-#define NID_X9_62_c2tnb359v1		701
-#define OBJ_X9_62_c2tnb359v1		OBJ_X9_62_c_TwoCurve,18L
-
-#define SN_X9_62_c2pnb368w1		"c2pnb368w1"
-#define NID_X9_62_c2pnb368w1		702
-#define OBJ_X9_62_c2pnb368w1		OBJ_X9_62_c_TwoCurve,19L
-
-#define SN_X9_62_c2tnb431r1		"c2tnb431r1"
-#define NID_X9_62_c2tnb431r1		703
-#define OBJ_X9_62_c2tnb431r1		OBJ_X9_62_c_TwoCurve,20L
-
-#define OBJ_X9_62_primeCurve		OBJ_X9_62_ellipticCurve,1L
-
-#define SN_X9_62_prime192v1		"prime192v1"
-#define NID_X9_62_prime192v1		409
-#define OBJ_X9_62_prime192v1		OBJ_X9_62_primeCurve,1L
-
-#define SN_X9_62_prime192v2		"prime192v2"
-#define NID_X9_62_prime192v2		410
-#define OBJ_X9_62_prime192v2		OBJ_X9_62_primeCurve,2L
-
-#define SN_X9_62_prime192v3		"prime192v3"
-#define NID_X9_62_prime192v3		411
-#define OBJ_X9_62_prime192v3		OBJ_X9_62_primeCurve,3L
-
-#define SN_X9_62_prime239v1		"prime239v1"
-#define NID_X9_62_prime239v1		412
-#define OBJ_X9_62_prime239v1		OBJ_X9_62_primeCurve,4L
-
-#define SN_X9_62_prime239v2		"prime239v2"
-#define NID_X9_62_prime239v2		413
-#define OBJ_X9_62_prime239v2		OBJ_X9_62_primeCurve,5L
-
-#define SN_X9_62_prime239v3		"prime239v3"
-#define NID_X9_62_prime239v3		414
-#define OBJ_X9_62_prime239v3		OBJ_X9_62_primeCurve,6L
-
-#define SN_X9_62_prime256v1		"prime256v1"
-#define NID_X9_62_prime256v1		415
-#define OBJ_X9_62_prime256v1		OBJ_X9_62_primeCurve,7L
-
-#define OBJ_X9_62_id_ecSigType		OBJ_ansi_X9_62,4L
-
-#define SN_ecdsa_with_SHA1		"ecdsa-with-SHA1"
-#define NID_ecdsa_with_SHA1		416
-#define OBJ_ecdsa_with_SHA1		OBJ_X9_62_id_ecSigType,1L
-
-#define OBJ_secg_ellipticCurve		OBJ_certicom_arc,0L
-
-#define SN_secp112r1		"secp112r1"
-#define NID_secp112r1		704
-#define OBJ_secp112r1		OBJ_secg_ellipticCurve,6L
-
-#define SN_secp112r2		"secp112r2"
-#define NID_secp112r2		705
-#define OBJ_secp112r2		OBJ_secg_ellipticCurve,7L
-
-#define SN_secp128r1		"secp128r1"
-#define NID_secp128r1		706
-#define OBJ_secp128r1		OBJ_secg_ellipticCurve,28L
-
-#define SN_secp128r2		"secp128r2"
-#define NID_secp128r2		707
-#define OBJ_secp128r2		OBJ_secg_ellipticCurve,29L
-
-#define SN_secp160k1		"secp160k1"
-#define NID_secp160k1		708
-#define OBJ_secp160k1		OBJ_secg_ellipticCurve,9L
-
-#define SN_secp160r1		"secp160r1"
-#define NID_secp160r1		709
-#define OBJ_secp160r1		OBJ_secg_ellipticCurve,8L
-
-#define SN_secp160r2		"secp160r2"
-#define NID_secp160r2		710
-#define OBJ_secp160r2		OBJ_secg_ellipticCurve,30L
-
-#define SN_secp192k1		"secp192k1"
-#define NID_secp192k1		711
-#define OBJ_secp192k1		OBJ_secg_ellipticCurve,31L
-
-#define SN_secp224k1		"secp224k1"
-#define NID_secp224k1		712
-#define OBJ_secp224k1		OBJ_secg_ellipticCurve,32L
-
-#define SN_secp224r1		"secp224r1"
-#define NID_secp224r1		713
-#define OBJ_secp224r1		OBJ_secg_ellipticCurve,33L
-
-#define SN_secp256k1		"secp256k1"
-#define NID_secp256k1		714
-#define OBJ_secp256k1		OBJ_secg_ellipticCurve,10L
-
-#define SN_secp384r1		"secp384r1"
-#define NID_secp384r1		715
-#define OBJ_secp384r1		OBJ_secg_ellipticCurve,34L
-
-#define SN_secp521r1		"secp521r1"
-#define NID_secp521r1		716
-#define OBJ_secp521r1		OBJ_secg_ellipticCurve,35L
-
-#define SN_sect113r1		"sect113r1"
-#define NID_sect113r1		717
-#define OBJ_sect113r1		OBJ_secg_ellipticCurve,4L
-
-#define SN_sect113r2		"sect113r2"
-#define NID_sect113r2		718
-#define OBJ_sect113r2		OBJ_secg_ellipticCurve,5L
-
-#define SN_sect131r1		"sect131r1"
-#define NID_sect131r1		719
-#define OBJ_sect131r1		OBJ_secg_ellipticCurve,22L
-
-#define SN_sect131r2		"sect131r2"
-#define NID_sect131r2		720
-#define OBJ_sect131r2		OBJ_secg_ellipticCurve,23L
-
-#define SN_sect163k1		"sect163k1"
-#define NID_sect163k1		721
-#define OBJ_sect163k1		OBJ_secg_ellipticCurve,1L
-
-#define SN_sect163r1		"sect163r1"
-#define NID_sect163r1		722
-#define OBJ_sect163r1		OBJ_secg_ellipticCurve,2L
-
-#define SN_sect163r2		"sect163r2"
-#define NID_sect163r2		723
-#define OBJ_sect163r2		OBJ_secg_ellipticCurve,15L
-
-#define SN_sect193r1		"sect193r1"
-#define NID_sect193r1		724
-#define OBJ_sect193r1		OBJ_secg_ellipticCurve,24L
-
-#define SN_sect193r2		"sect193r2"
-#define NID_sect193r2		725
-#define OBJ_sect193r2		OBJ_secg_ellipticCurve,25L
-
-#define SN_sect233k1		"sect233k1"
-#define NID_sect233k1		726
-#define OBJ_sect233k1		OBJ_secg_ellipticCurve,26L
-
-#define SN_sect233r1		"sect233r1"
-#define NID_sect233r1		727
-#define OBJ_sect233r1		OBJ_secg_ellipticCurve,27L
-
-#define SN_sect239k1		"sect239k1"
-#define NID_sect239k1		728
-#define OBJ_sect239k1		OBJ_secg_ellipticCurve,3L
-
-#define SN_sect283k1		"sect283k1"
-#define NID_sect283k1		729
-#define OBJ_sect283k1		OBJ_secg_ellipticCurve,16L
-
-#define SN_sect283r1		"sect283r1"
-#define NID_sect283r1		730
-#define OBJ_sect283r1		OBJ_secg_ellipticCurve,17L
-
-#define SN_sect409k1		"sect409k1"
-#define NID_sect409k1		731
-#define OBJ_sect409k1		OBJ_secg_ellipticCurve,36L
-
-#define SN_sect409r1		"sect409r1"
-#define NID_sect409r1		732
-#define OBJ_sect409r1		OBJ_secg_ellipticCurve,37L
-
-#define SN_sect571k1		"sect571k1"
-#define NID_sect571k1		733
-#define OBJ_sect571k1		OBJ_secg_ellipticCurve,38L
-
-#define SN_sect571r1		"sect571r1"
-#define NID_sect571r1		734
-#define OBJ_sect571r1		OBJ_secg_ellipticCurve,39L
-
-#define OBJ_wap_wsg_idm_ecid		OBJ_wap_wsg,4L
-
-#define SN_wap_wsg_idm_ecid_wtls1		"wap-wsg-idm-ecid-wtls1"
-#define NID_wap_wsg_idm_ecid_wtls1		735
-#define OBJ_wap_wsg_idm_ecid_wtls1		OBJ_wap_wsg_idm_ecid,1L
-
-#define SN_wap_wsg_idm_ecid_wtls3		"wap-wsg-idm-ecid-wtls3"
-#define NID_wap_wsg_idm_ecid_wtls3		736
-#define OBJ_wap_wsg_idm_ecid_wtls3		OBJ_wap_wsg_idm_ecid,3L
-
-#define SN_wap_wsg_idm_ecid_wtls4		"wap-wsg-idm-ecid-wtls4"
-#define NID_wap_wsg_idm_ecid_wtls4		737
-#define OBJ_wap_wsg_idm_ecid_wtls4		OBJ_wap_wsg_idm_ecid,4L
-
-#define SN_wap_wsg_idm_ecid_wtls5		"wap-wsg-idm-ecid-wtls5"
-#define NID_wap_wsg_idm_ecid_wtls5		738
-#define OBJ_wap_wsg_idm_ecid_wtls5		OBJ_wap_wsg_idm_ecid,5L
-
-#define SN_wap_wsg_idm_ecid_wtls6		"wap-wsg-idm-ecid-wtls6"
-#define NID_wap_wsg_idm_ecid_wtls6		739
-#define OBJ_wap_wsg_idm_ecid_wtls6		OBJ_wap_wsg_idm_ecid,6L
-
-#define SN_wap_wsg_idm_ecid_wtls7		"wap-wsg-idm-ecid-wtls7"
-#define NID_wap_wsg_idm_ecid_wtls7		740
-#define OBJ_wap_wsg_idm_ecid_wtls7		OBJ_wap_wsg_idm_ecid,7L
-
-#define SN_wap_wsg_idm_ecid_wtls8		"wap-wsg-idm-ecid-wtls8"
-#define NID_wap_wsg_idm_ecid_wtls8		741
-#define OBJ_wap_wsg_idm_ecid_wtls8		OBJ_wap_wsg_idm_ecid,8L
-
-#define SN_wap_wsg_idm_ecid_wtls9		"wap-wsg-idm-ecid-wtls9"
-#define NID_wap_wsg_idm_ecid_wtls9		742
-#define OBJ_wap_wsg_idm_ecid_wtls9		OBJ_wap_wsg_idm_ecid,9L
-
-#define SN_wap_wsg_idm_ecid_wtls10		"wap-wsg-idm-ecid-wtls10"
-#define NID_wap_wsg_idm_ecid_wtls10		743
-#define OBJ_wap_wsg_idm_ecid_wtls10		OBJ_wap_wsg_idm_ecid,10L
-
-#define SN_wap_wsg_idm_ecid_wtls11		"wap-wsg-idm-ecid-wtls11"
-#define NID_wap_wsg_idm_ecid_wtls11		744
-#define OBJ_wap_wsg_idm_ecid_wtls11		OBJ_wap_wsg_idm_ecid,11L
-
-#define SN_wap_wsg_idm_ecid_wtls12		"wap-wsg-idm-ecid-wtls12"
-#define NID_wap_wsg_idm_ecid_wtls12		745
-#define OBJ_wap_wsg_idm_ecid_wtls12		OBJ_wap_wsg_idm_ecid,12L
-
-#define SN_cast5_cbc		"CAST5-CBC"
-#define LN_cast5_cbc		"cast5-cbc"
-#define NID_cast5_cbc		108
-#define OBJ_cast5_cbc		OBJ_ISO_US,113533L,7L,66L,10L
-
-#define SN_cast5_ecb		"CAST5-ECB"
-#define LN_cast5_ecb		"cast5-ecb"
-#define NID_cast5_ecb		109
-
-#define SN_cast5_cfb64		"CAST5-CFB"
-#define LN_cast5_cfb64		"cast5-cfb"
-#define NID_cast5_cfb64		110
-
-#define SN_cast5_ofb64		"CAST5-OFB"
-#define LN_cast5_ofb64		"cast5-ofb"
-#define NID_cast5_ofb64		111
-
-#define LN_pbeWithMD5AndCast5_CBC		"pbeWithMD5AndCast5CBC"
-#define NID_pbeWithMD5AndCast5_CBC		112
-#define OBJ_pbeWithMD5AndCast5_CBC		OBJ_ISO_US,113533L,7L,66L,12L
-
-#define SN_rsadsi		"rsadsi"
-#define LN_rsadsi		"RSA Data Security, Inc."
-#define NID_rsadsi		1
-#define OBJ_rsadsi		OBJ_ISO_US,113549L
-
-#define SN_pkcs		"pkcs"
-#define LN_pkcs		"RSA Data Security, Inc. PKCS"
-#define NID_pkcs		2
-#define OBJ_pkcs		OBJ_rsadsi,1L
-
-#define SN_pkcs1		"pkcs1"
-#define NID_pkcs1		186
-#define OBJ_pkcs1		OBJ_pkcs,1L
-
-#define LN_rsaEncryption		"rsaEncryption"
-#define NID_rsaEncryption		6
-#define OBJ_rsaEncryption		OBJ_pkcs1,1L
-
-#define SN_md2WithRSAEncryption		"RSA-MD2"
-#define LN_md2WithRSAEncryption		"md2WithRSAEncryption"
-#define NID_md2WithRSAEncryption		7
-#define OBJ_md2WithRSAEncryption		OBJ_pkcs1,2L
-
-#define SN_md4WithRSAEncryption		"RSA-MD4"
-#define LN_md4WithRSAEncryption		"md4WithRSAEncryption"
-#define NID_md4WithRSAEncryption		396
-#define OBJ_md4WithRSAEncryption		OBJ_pkcs1,3L
-
-#define SN_md5WithRSAEncryption		"RSA-MD5"
-#define LN_md5WithRSAEncryption		"md5WithRSAEncryption"
-#define NID_md5WithRSAEncryption		8
-#define OBJ_md5WithRSAEncryption		OBJ_pkcs1,4L
-
-#define SN_sha1WithRSAEncryption		"RSA-SHA1"
-#define LN_sha1WithRSAEncryption		"sha1WithRSAEncryption"
-#define NID_sha1WithRSAEncryption		65
-#define OBJ_sha1WithRSAEncryption		OBJ_pkcs1,5L
-
-#define SN_sha256WithRSAEncryption		"RSA-SHA256"
-#define LN_sha256WithRSAEncryption		"sha256WithRSAEncryption"
-#define NID_sha256WithRSAEncryption		668
-#define OBJ_sha256WithRSAEncryption		OBJ_pkcs1,11L
-
-#define SN_sha384WithRSAEncryption		"RSA-SHA384"
-#define LN_sha384WithRSAEncryption		"sha384WithRSAEncryption"
-#define NID_sha384WithRSAEncryption		669
-#define OBJ_sha384WithRSAEncryption		OBJ_pkcs1,12L
-
-#define SN_sha512WithRSAEncryption		"RSA-SHA512"
-#define LN_sha512WithRSAEncryption		"sha512WithRSAEncryption"
-#define NID_sha512WithRSAEncryption		670
-#define OBJ_sha512WithRSAEncryption		OBJ_pkcs1,13L
-
-#define SN_sha224WithRSAEncryption		"RSA-SHA224"
-#define LN_sha224WithRSAEncryption		"sha224WithRSAEncryption"
-#define NID_sha224WithRSAEncryption		671
-#define OBJ_sha224WithRSAEncryption		OBJ_pkcs1,14L
-
-#define SN_pkcs3		"pkcs3"
-#define NID_pkcs3		27
-#define OBJ_pkcs3		OBJ_pkcs,3L
-
-#define LN_dhKeyAgreement		"dhKeyAgreement"
-#define NID_dhKeyAgreement		28
-#define OBJ_dhKeyAgreement		OBJ_pkcs3,1L
-
-#define SN_pkcs5		"pkcs5"
-#define NID_pkcs5		187
-#define OBJ_pkcs5		OBJ_pkcs,5L
-
-#define SN_pbeWithMD2AndDES_CBC		"PBE-MD2-DES"
-#define LN_pbeWithMD2AndDES_CBC		"pbeWithMD2AndDES-CBC"
-#define NID_pbeWithMD2AndDES_CBC		9
-#define OBJ_pbeWithMD2AndDES_CBC		OBJ_pkcs5,1L
-
-#define SN_pbeWithMD5AndDES_CBC		"PBE-MD5-DES"
-#define LN_pbeWithMD5AndDES_CBC		"pbeWithMD5AndDES-CBC"
-#define NID_pbeWithMD5AndDES_CBC		10
-#define OBJ_pbeWithMD5AndDES_CBC		OBJ_pkcs5,3L
-
-#define SN_pbeWithMD2AndRC2_CBC		"PBE-MD2-RC2-64"
-#define LN_pbeWithMD2AndRC2_CBC		"pbeWithMD2AndRC2-CBC"
-#define NID_pbeWithMD2AndRC2_CBC		168
-#define OBJ_pbeWithMD2AndRC2_CBC		OBJ_pkcs5,4L
-
-#define SN_pbeWithMD5AndRC2_CBC		"PBE-MD5-RC2-64"
-#define LN_pbeWithMD5AndRC2_CBC		"pbeWithMD5AndRC2-CBC"
-#define NID_pbeWithMD5AndRC2_CBC		169
-#define OBJ_pbeWithMD5AndRC2_CBC		OBJ_pkcs5,6L
-
-#define SN_pbeWithSHA1AndDES_CBC		"PBE-SHA1-DES"
-#define LN_pbeWithSHA1AndDES_CBC		"pbeWithSHA1AndDES-CBC"
-#define NID_pbeWithSHA1AndDES_CBC		170
-#define OBJ_pbeWithSHA1AndDES_CBC		OBJ_pkcs5,10L
-
-#define SN_pbeWithSHA1AndRC2_CBC		"PBE-SHA1-RC2-64"
-#define LN_pbeWithSHA1AndRC2_CBC		"pbeWithSHA1AndRC2-CBC"
-#define NID_pbeWithSHA1AndRC2_CBC		68
-#define OBJ_pbeWithSHA1AndRC2_CBC		OBJ_pkcs5,11L
-
-#define LN_id_pbkdf2		"PBKDF2"
-#define NID_id_pbkdf2		69
-#define OBJ_id_pbkdf2		OBJ_pkcs5,12L
-
-#define LN_pbes2		"PBES2"
-#define NID_pbes2		161
-#define OBJ_pbes2		OBJ_pkcs5,13L
-
-#define LN_pbmac1		"PBMAC1"
-#define NID_pbmac1		162
-#define OBJ_pbmac1		OBJ_pkcs5,14L
-
-#define SN_pkcs7		"pkcs7"
-#define NID_pkcs7		20
-#define OBJ_pkcs7		OBJ_pkcs,7L
-
-#define LN_pkcs7_data		"pkcs7-data"
-#define NID_pkcs7_data		21
-#define OBJ_pkcs7_data		OBJ_pkcs7,1L
-
-#define LN_pkcs7_signed		"pkcs7-signedData"
-#define NID_pkcs7_signed		22
-#define OBJ_pkcs7_signed		OBJ_pkcs7,2L
-
-#define LN_pkcs7_enveloped		"pkcs7-envelopedData"
-#define NID_pkcs7_enveloped		23
-#define OBJ_pkcs7_enveloped		OBJ_pkcs7,3L
-
-#define LN_pkcs7_signedAndEnveloped		"pkcs7-signedAndEnvelopedData"
-#define NID_pkcs7_signedAndEnveloped		24
-#define OBJ_pkcs7_signedAndEnveloped		OBJ_pkcs7,4L
-
-#define LN_pkcs7_digest		"pkcs7-digestData"
-#define NID_pkcs7_digest		25
-#define OBJ_pkcs7_digest		OBJ_pkcs7,5L
-
-#define LN_pkcs7_encrypted		"pkcs7-encryptedData"
-#define NID_pkcs7_encrypted		26
-#define OBJ_pkcs7_encrypted		OBJ_pkcs7,6L
-
-#define SN_pkcs9		"pkcs9"
-#define NID_pkcs9		47
-#define OBJ_pkcs9		OBJ_pkcs,9L
-
-#define LN_pkcs9_emailAddress		"emailAddress"
-#define NID_pkcs9_emailAddress		48
-#define OBJ_pkcs9_emailAddress		OBJ_pkcs9,1L
-
-#define LN_pkcs9_unstructuredName		"unstructuredName"
-#define NID_pkcs9_unstructuredName		49
-#define OBJ_pkcs9_unstructuredName		OBJ_pkcs9,2L
-
-#define LN_pkcs9_contentType		"contentType"
-#define NID_pkcs9_contentType		50
-#define OBJ_pkcs9_contentType		OBJ_pkcs9,3L
-
-#define LN_pkcs9_messageDigest		"messageDigest"
-#define NID_pkcs9_messageDigest		51
-#define OBJ_pkcs9_messageDigest		OBJ_pkcs9,4L
-
-#define LN_pkcs9_signingTime		"signingTime"
-#define NID_pkcs9_signingTime		52
-#define OBJ_pkcs9_signingTime		OBJ_pkcs9,5L
-
-#define LN_pkcs9_countersignature		"countersignature"
-#define NID_pkcs9_countersignature		53
-#define OBJ_pkcs9_countersignature		OBJ_pkcs9,6L
-
-#define LN_pkcs9_challengePassword		"challengePassword"
-#define NID_pkcs9_challengePassword		54
-#define OBJ_pkcs9_challengePassword		OBJ_pkcs9,7L
-
-#define LN_pkcs9_unstructuredAddress		"unstructuredAddress"
-#define NID_pkcs9_unstructuredAddress		55
-#define OBJ_pkcs9_unstructuredAddress		OBJ_pkcs9,8L
-
-#define LN_pkcs9_extCertAttributes		"extendedCertificateAttributes"
-#define NID_pkcs9_extCertAttributes		56
-#define OBJ_pkcs9_extCertAttributes		OBJ_pkcs9,9L
-
-#define SN_ext_req		"extReq"
-#define LN_ext_req		"Extension Request"
-#define NID_ext_req		172
-#define OBJ_ext_req		OBJ_pkcs9,14L
-
-#define SN_SMIMECapabilities		"SMIME-CAPS"
-#define LN_SMIMECapabilities		"S/MIME Capabilities"
-#define NID_SMIMECapabilities		167
-#define OBJ_SMIMECapabilities		OBJ_pkcs9,15L
-
-#define SN_SMIME		"SMIME"
-#define LN_SMIME		"S/MIME"
-#define NID_SMIME		188
-#define OBJ_SMIME		OBJ_pkcs9,16L
-
-#define SN_id_smime_mod		"id-smime-mod"
-#define NID_id_smime_mod		189
-#define OBJ_id_smime_mod		OBJ_SMIME,0L
-
-#define SN_id_smime_ct		"id-smime-ct"
-#define NID_id_smime_ct		190
-#define OBJ_id_smime_ct		OBJ_SMIME,1L
-
-#define SN_id_smime_aa		"id-smime-aa"
-#define NID_id_smime_aa		191
-#define OBJ_id_smime_aa		OBJ_SMIME,2L
-
-#define SN_id_smime_alg		"id-smime-alg"
-#define NID_id_smime_alg		192
-#define OBJ_id_smime_alg		OBJ_SMIME,3L
-
-#define SN_id_smime_cd		"id-smime-cd"
-#define NID_id_smime_cd		193
-#define OBJ_id_smime_cd		OBJ_SMIME,4L
-
-#define SN_id_smime_spq		"id-smime-spq"
-#define NID_id_smime_spq		194
-#define OBJ_id_smime_spq		OBJ_SMIME,5L
-
-#define SN_id_smime_cti		"id-smime-cti"
-#define NID_id_smime_cti		195
-#define OBJ_id_smime_cti		OBJ_SMIME,6L
-
-#define SN_id_smime_mod_cms		"id-smime-mod-cms"
-#define NID_id_smime_mod_cms		196
-#define OBJ_id_smime_mod_cms		OBJ_id_smime_mod,1L
-
-#define SN_id_smime_mod_ess		"id-smime-mod-ess"
-#define NID_id_smime_mod_ess		197
-#define OBJ_id_smime_mod_ess		OBJ_id_smime_mod,2L
-
-#define SN_id_smime_mod_oid		"id-smime-mod-oid"
-#define NID_id_smime_mod_oid		198
-#define OBJ_id_smime_mod_oid		OBJ_id_smime_mod,3L
-
-#define SN_id_smime_mod_msg_v3		"id-smime-mod-msg-v3"
-#define NID_id_smime_mod_msg_v3		199
-#define OBJ_id_smime_mod_msg_v3		OBJ_id_smime_mod,4L
-
-#define SN_id_smime_mod_ets_eSignature_88		"id-smime-mod-ets-eSignature-88"
-#define NID_id_smime_mod_ets_eSignature_88		200
-#define OBJ_id_smime_mod_ets_eSignature_88		OBJ_id_smime_mod,5L
-
-#define SN_id_smime_mod_ets_eSignature_97		"id-smime-mod-ets-eSignature-97"
-#define NID_id_smime_mod_ets_eSignature_97		201
-#define OBJ_id_smime_mod_ets_eSignature_97		OBJ_id_smime_mod,6L
-
-#define SN_id_smime_mod_ets_eSigPolicy_88		"id-smime-mod-ets-eSigPolicy-88"
-#define NID_id_smime_mod_ets_eSigPolicy_88		202
-#define OBJ_id_smime_mod_ets_eSigPolicy_88		OBJ_id_smime_mod,7L
-
-#define SN_id_smime_mod_ets_eSigPolicy_97		"id-smime-mod-ets-eSigPolicy-97"
-#define NID_id_smime_mod_ets_eSigPolicy_97		203
-#define OBJ_id_smime_mod_ets_eSigPolicy_97		OBJ_id_smime_mod,8L
-
-#define SN_id_smime_ct_receipt		"id-smime-ct-receipt"
-#define NID_id_smime_ct_receipt		204
-#define OBJ_id_smime_ct_receipt		OBJ_id_smime_ct,1L
-
-#define SN_id_smime_ct_authData		"id-smime-ct-authData"
-#define NID_id_smime_ct_authData		205
-#define OBJ_id_smime_ct_authData		OBJ_id_smime_ct,2L
-
-#define SN_id_smime_ct_publishCert		"id-smime-ct-publishCert"
-#define NID_id_smime_ct_publishCert		206
-#define OBJ_id_smime_ct_publishCert		OBJ_id_smime_ct,3L
-
-#define SN_id_smime_ct_TSTInfo		"id-smime-ct-TSTInfo"
-#define NID_id_smime_ct_TSTInfo		207
-#define OBJ_id_smime_ct_TSTInfo		OBJ_id_smime_ct,4L
-
-#define SN_id_smime_ct_TDTInfo		"id-smime-ct-TDTInfo"
-#define NID_id_smime_ct_TDTInfo		208
-#define OBJ_id_smime_ct_TDTInfo		OBJ_id_smime_ct,5L
-
-#define SN_id_smime_ct_contentInfo		"id-smime-ct-contentInfo"
-#define NID_id_smime_ct_contentInfo		209
-#define OBJ_id_smime_ct_contentInfo		OBJ_id_smime_ct,6L
-
-#define SN_id_smime_ct_DVCSRequestData		"id-smime-ct-DVCSRequestData"
-#define NID_id_smime_ct_DVCSRequestData		210
-#define OBJ_id_smime_ct_DVCSRequestData		OBJ_id_smime_ct,7L
-
-#define SN_id_smime_ct_DVCSResponseData		"id-smime-ct-DVCSResponseData"
-#define NID_id_smime_ct_DVCSResponseData		211
-#define OBJ_id_smime_ct_DVCSResponseData		OBJ_id_smime_ct,8L
-
-#define SN_id_smime_aa_receiptRequest		"id-smime-aa-receiptRequest"
-#define NID_id_smime_aa_receiptRequest		212
-#define OBJ_id_smime_aa_receiptRequest		OBJ_id_smime_aa,1L
-
-#define SN_id_smime_aa_securityLabel		"id-smime-aa-securityLabel"
-#define NID_id_smime_aa_securityLabel		213
-#define OBJ_id_smime_aa_securityLabel		OBJ_id_smime_aa,2L
-
-#define SN_id_smime_aa_mlExpandHistory		"id-smime-aa-mlExpandHistory"
-#define NID_id_smime_aa_mlExpandHistory		214
-#define OBJ_id_smime_aa_mlExpandHistory		OBJ_id_smime_aa,3L
-
-#define SN_id_smime_aa_contentHint		"id-smime-aa-contentHint"
-#define NID_id_smime_aa_contentHint		215
-#define OBJ_id_smime_aa_contentHint		OBJ_id_smime_aa,4L
-
-#define SN_id_smime_aa_msgSigDigest		"id-smime-aa-msgSigDigest"
-#define NID_id_smime_aa_msgSigDigest		216
-#define OBJ_id_smime_aa_msgSigDigest		OBJ_id_smime_aa,5L
-
-#define SN_id_smime_aa_encapContentType		"id-smime-aa-encapContentType"
-#define NID_id_smime_aa_encapContentType		217
-#define OBJ_id_smime_aa_encapContentType		OBJ_id_smime_aa,6L
-
-#define SN_id_smime_aa_contentIdentifier		"id-smime-aa-contentIdentifier"
-#define NID_id_smime_aa_contentIdentifier		218
-#define OBJ_id_smime_aa_contentIdentifier		OBJ_id_smime_aa,7L
-
-#define SN_id_smime_aa_macValue		"id-smime-aa-macValue"
-#define NID_id_smime_aa_macValue		219
-#define OBJ_id_smime_aa_macValue		OBJ_id_smime_aa,8L
-
-#define SN_id_smime_aa_equivalentLabels		"id-smime-aa-equivalentLabels"
-#define NID_id_smime_aa_equivalentLabels		220
-#define OBJ_id_smime_aa_equivalentLabels		OBJ_id_smime_aa,9L
-
-#define SN_id_smime_aa_contentReference		"id-smime-aa-contentReference"
-#define NID_id_smime_aa_contentReference		221
-#define OBJ_id_smime_aa_contentReference		OBJ_id_smime_aa,10L
-
-#define SN_id_smime_aa_encrypKeyPref		"id-smime-aa-encrypKeyPref"
-#define NID_id_smime_aa_encrypKeyPref		222
-#define OBJ_id_smime_aa_encrypKeyPref		OBJ_id_smime_aa,11L
-
-#define SN_id_smime_aa_signingCertificate		"id-smime-aa-signingCertificate"
-#define NID_id_smime_aa_signingCertificate		223
-#define OBJ_id_smime_aa_signingCertificate		OBJ_id_smime_aa,12L
-
-#define SN_id_smime_aa_smimeEncryptCerts		"id-smime-aa-smimeEncryptCerts"
-#define NID_id_smime_aa_smimeEncryptCerts		224
-#define OBJ_id_smime_aa_smimeEncryptCerts		OBJ_id_smime_aa,13L
-
-#define SN_id_smime_aa_timeStampToken		"id-smime-aa-timeStampToken"
-#define NID_id_smime_aa_timeStampToken		225
-#define OBJ_id_smime_aa_timeStampToken		OBJ_id_smime_aa,14L
-
-#define SN_id_smime_aa_ets_sigPolicyId		"id-smime-aa-ets-sigPolicyId"
-#define NID_id_smime_aa_ets_sigPolicyId		226
-#define OBJ_id_smime_aa_ets_sigPolicyId		OBJ_id_smime_aa,15L
-
-#define SN_id_smime_aa_ets_commitmentType		"id-smime-aa-ets-commitmentType"
-#define NID_id_smime_aa_ets_commitmentType		227
-#define OBJ_id_smime_aa_ets_commitmentType		OBJ_id_smime_aa,16L
-
-#define SN_id_smime_aa_ets_signerLocation		"id-smime-aa-ets-signerLocation"
-#define NID_id_smime_aa_ets_signerLocation		228
-#define OBJ_id_smime_aa_ets_signerLocation		OBJ_id_smime_aa,17L
-
-#define SN_id_smime_aa_ets_signerAttr		"id-smime-aa-ets-signerAttr"
-#define NID_id_smime_aa_ets_signerAttr		229
-#define OBJ_id_smime_aa_ets_signerAttr		OBJ_id_smime_aa,18L
-
-#define SN_id_smime_aa_ets_otherSigCert		"id-smime-aa-ets-otherSigCert"
-#define NID_id_smime_aa_ets_otherSigCert		230
-#define OBJ_id_smime_aa_ets_otherSigCert		OBJ_id_smime_aa,19L
-
-#define SN_id_smime_aa_ets_contentTimestamp		"id-smime-aa-ets-contentTimestamp"
-#define NID_id_smime_aa_ets_contentTimestamp		231
-#define OBJ_id_smime_aa_ets_contentTimestamp		OBJ_id_smime_aa,20L
-
-#define SN_id_smime_aa_ets_CertificateRefs		"id-smime-aa-ets-CertificateRefs"
-#define NID_id_smime_aa_ets_CertificateRefs		232
-#define OBJ_id_smime_aa_ets_CertificateRefs		OBJ_id_smime_aa,21L
-
-#define SN_id_smime_aa_ets_RevocationRefs		"id-smime-aa-ets-RevocationRefs"
-#define NID_id_smime_aa_ets_RevocationRefs		233
-#define OBJ_id_smime_aa_ets_RevocationRefs		OBJ_id_smime_aa,22L
-
-#define SN_id_smime_aa_ets_certValues		"id-smime-aa-ets-certValues"
-#define NID_id_smime_aa_ets_certValues		234
-#define OBJ_id_smime_aa_ets_certValues		OBJ_id_smime_aa,23L
-
-#define SN_id_smime_aa_ets_revocationValues		"id-smime-aa-ets-revocationValues"
-#define NID_id_smime_aa_ets_revocationValues		235
-#define OBJ_id_smime_aa_ets_revocationValues		OBJ_id_smime_aa,24L
-
-#define SN_id_smime_aa_ets_escTimeStamp		"id-smime-aa-ets-escTimeStamp"
-#define NID_id_smime_aa_ets_escTimeStamp		236
-#define OBJ_id_smime_aa_ets_escTimeStamp		OBJ_id_smime_aa,25L
-
-#define SN_id_smime_aa_ets_certCRLTimestamp		"id-smime-aa-ets-certCRLTimestamp"
-#define NID_id_smime_aa_ets_certCRLTimestamp		237
-#define OBJ_id_smime_aa_ets_certCRLTimestamp		OBJ_id_smime_aa,26L
-
-#define SN_id_smime_aa_ets_archiveTimeStamp		"id-smime-aa-ets-archiveTimeStamp"
-#define NID_id_smime_aa_ets_archiveTimeStamp		238
-#define OBJ_id_smime_aa_ets_archiveTimeStamp		OBJ_id_smime_aa,27L
-
-#define SN_id_smime_aa_signatureType		"id-smime-aa-signatureType"
-#define NID_id_smime_aa_signatureType		239
-#define OBJ_id_smime_aa_signatureType		OBJ_id_smime_aa,28L
-
-#define SN_id_smime_aa_dvcs_dvc		"id-smime-aa-dvcs-dvc"
-#define NID_id_smime_aa_dvcs_dvc		240
-#define OBJ_id_smime_aa_dvcs_dvc		OBJ_id_smime_aa,29L
-
-#define SN_id_smime_alg_ESDHwith3DES		"id-smime-alg-ESDHwith3DES"
-#define NID_id_smime_alg_ESDHwith3DES		241
-#define OBJ_id_smime_alg_ESDHwith3DES		OBJ_id_smime_alg,1L
-
-#define SN_id_smime_alg_ESDHwithRC2		"id-smime-alg-ESDHwithRC2"
-#define NID_id_smime_alg_ESDHwithRC2		242
-#define OBJ_id_smime_alg_ESDHwithRC2		OBJ_id_smime_alg,2L
-
-#define SN_id_smime_alg_3DESwrap		"id-smime-alg-3DESwrap"
-#define NID_id_smime_alg_3DESwrap		243
-#define OBJ_id_smime_alg_3DESwrap		OBJ_id_smime_alg,3L
-
-#define SN_id_smime_alg_RC2wrap		"id-smime-alg-RC2wrap"
-#define NID_id_smime_alg_RC2wrap		244
-#define OBJ_id_smime_alg_RC2wrap		OBJ_id_smime_alg,4L
-
-#define SN_id_smime_alg_ESDH		"id-smime-alg-ESDH"
-#define NID_id_smime_alg_ESDH		245
-#define OBJ_id_smime_alg_ESDH		OBJ_id_smime_alg,5L
-
-#define SN_id_smime_alg_CMS3DESwrap		"id-smime-alg-CMS3DESwrap"
-#define NID_id_smime_alg_CMS3DESwrap		246
-#define OBJ_id_smime_alg_CMS3DESwrap		OBJ_id_smime_alg,6L
-
-#define SN_id_smime_alg_CMSRC2wrap		"id-smime-alg-CMSRC2wrap"
-#define NID_id_smime_alg_CMSRC2wrap		247
-#define OBJ_id_smime_alg_CMSRC2wrap		OBJ_id_smime_alg,7L
-
-#define SN_id_smime_cd_ldap		"id-smime-cd-ldap"
-#define NID_id_smime_cd_ldap		248
-#define OBJ_id_smime_cd_ldap		OBJ_id_smime_cd,1L
-
-#define SN_id_smime_spq_ets_sqt_uri		"id-smime-spq-ets-sqt-uri"
-#define NID_id_smime_spq_ets_sqt_uri		249
-#define OBJ_id_smime_spq_ets_sqt_uri		OBJ_id_smime_spq,1L
-
-#define SN_id_smime_spq_ets_sqt_unotice		"id-smime-spq-ets-sqt-unotice"
-#define NID_id_smime_spq_ets_sqt_unotice		250
-#define OBJ_id_smime_spq_ets_sqt_unotice		OBJ_id_smime_spq,2L
-
-#define SN_id_smime_cti_ets_proofOfOrigin		"id-smime-cti-ets-proofOfOrigin"
-#define NID_id_smime_cti_ets_proofOfOrigin		251
-#define OBJ_id_smime_cti_ets_proofOfOrigin		OBJ_id_smime_cti,1L
-
-#define SN_id_smime_cti_ets_proofOfReceipt		"id-smime-cti-ets-proofOfReceipt"
-#define NID_id_smime_cti_ets_proofOfReceipt		252
-#define OBJ_id_smime_cti_ets_proofOfReceipt		OBJ_id_smime_cti,2L
-
-#define SN_id_smime_cti_ets_proofOfDelivery		"id-smime-cti-ets-proofOfDelivery"
-#define NID_id_smime_cti_ets_proofOfDelivery		253
-#define OBJ_id_smime_cti_ets_proofOfDelivery		OBJ_id_smime_cti,3L
-
-#define SN_id_smime_cti_ets_proofOfSender		"id-smime-cti-ets-proofOfSender"
-#define NID_id_smime_cti_ets_proofOfSender		254
-#define OBJ_id_smime_cti_ets_proofOfSender		OBJ_id_smime_cti,4L
-
-#define SN_id_smime_cti_ets_proofOfApproval		"id-smime-cti-ets-proofOfApproval"
-#define NID_id_smime_cti_ets_proofOfApproval		255
-#define OBJ_id_smime_cti_ets_proofOfApproval		OBJ_id_smime_cti,5L
-
-#define SN_id_smime_cti_ets_proofOfCreation		"id-smime-cti-ets-proofOfCreation"
-#define NID_id_smime_cti_ets_proofOfCreation		256
-#define OBJ_id_smime_cti_ets_proofOfCreation		OBJ_id_smime_cti,6L
-
-#define LN_friendlyName		"friendlyName"
-#define NID_friendlyName		156
-#define OBJ_friendlyName		OBJ_pkcs9,20L
-
-#define LN_localKeyID		"localKeyID"
-#define NID_localKeyID		157
-#define OBJ_localKeyID		OBJ_pkcs9,21L
-
-#define SN_ms_csp_name		"CSPName"
-#define LN_ms_csp_name		"Microsoft CSP Name"
-#define NID_ms_csp_name		417
-#define OBJ_ms_csp_name		1L,3L,6L,1L,4L,1L,311L,17L,1L
-
-#define OBJ_certTypes		OBJ_pkcs9,22L
-
-#define LN_x509Certificate		"x509Certificate"
-#define NID_x509Certificate		158
-#define OBJ_x509Certificate		OBJ_certTypes,1L
-
-#define LN_sdsiCertificate		"sdsiCertificate"
-#define NID_sdsiCertificate		159
-#define OBJ_sdsiCertificate		OBJ_certTypes,2L
-
-#define OBJ_crlTypes		OBJ_pkcs9,23L
-
-#define LN_x509Crl		"x509Crl"
-#define NID_x509Crl		160
-#define OBJ_x509Crl		OBJ_crlTypes,1L
-
-#define OBJ_pkcs12		OBJ_pkcs,12L
-
-#define OBJ_pkcs12_pbeids		OBJ_pkcs12,1L
-
-#define SN_pbe_WithSHA1And128BitRC4		"PBE-SHA1-RC4-128"
-#define LN_pbe_WithSHA1And128BitRC4		"pbeWithSHA1And128BitRC4"
-#define NID_pbe_WithSHA1And128BitRC4		144
-#define OBJ_pbe_WithSHA1And128BitRC4		OBJ_pkcs12_pbeids,1L
-
-#define SN_pbe_WithSHA1And40BitRC4		"PBE-SHA1-RC4-40"
-#define LN_pbe_WithSHA1And40BitRC4		"pbeWithSHA1And40BitRC4"
-#define NID_pbe_WithSHA1And40BitRC4		145
-#define OBJ_pbe_WithSHA1And40BitRC4		OBJ_pkcs12_pbeids,2L
-
-#define SN_pbe_WithSHA1And3_Key_TripleDES_CBC		"PBE-SHA1-3DES"
-#define LN_pbe_WithSHA1And3_Key_TripleDES_CBC		"pbeWithSHA1And3-KeyTripleDES-CBC"
-#define NID_pbe_WithSHA1And3_Key_TripleDES_CBC		146
-#define OBJ_pbe_WithSHA1And3_Key_TripleDES_CBC		OBJ_pkcs12_pbeids,3L
-
-#define SN_pbe_WithSHA1And2_Key_TripleDES_CBC		"PBE-SHA1-2DES"
-#define LN_pbe_WithSHA1And2_Key_TripleDES_CBC		"pbeWithSHA1And2-KeyTripleDES-CBC"
-#define NID_pbe_WithSHA1And2_Key_TripleDES_CBC		147
-#define OBJ_pbe_WithSHA1And2_Key_TripleDES_CBC		OBJ_pkcs12_pbeids,4L
-
-#define SN_pbe_WithSHA1And128BitRC2_CBC		"PBE-SHA1-RC2-128"
-#define LN_pbe_WithSHA1And128BitRC2_CBC		"pbeWithSHA1And128BitRC2-CBC"
-#define NID_pbe_WithSHA1And128BitRC2_CBC		148
-#define OBJ_pbe_WithSHA1And128BitRC2_CBC		OBJ_pkcs12_pbeids,5L
-
-#define SN_pbe_WithSHA1And40BitRC2_CBC		"PBE-SHA1-RC2-40"
-#define LN_pbe_WithSHA1And40BitRC2_CBC		"pbeWithSHA1And40BitRC2-CBC"
-#define NID_pbe_WithSHA1And40BitRC2_CBC		149
-#define OBJ_pbe_WithSHA1And40BitRC2_CBC		OBJ_pkcs12_pbeids,6L
-
-#define OBJ_pkcs12_Version1		OBJ_pkcs12,10L
-
-#define OBJ_pkcs12_BagIds		OBJ_pkcs12_Version1,1L
-
-#define LN_keyBag		"keyBag"
-#define NID_keyBag		150
-#define OBJ_keyBag		OBJ_pkcs12_BagIds,1L
-
-#define LN_pkcs8ShroudedKeyBag		"pkcs8ShroudedKeyBag"
-#define NID_pkcs8ShroudedKeyBag		151
-#define OBJ_pkcs8ShroudedKeyBag		OBJ_pkcs12_BagIds,2L
-
-#define LN_certBag		"certBag"
-#define NID_certBag		152
-#define OBJ_certBag		OBJ_pkcs12_BagIds,3L
-
-#define LN_crlBag		"crlBag"
-#define NID_crlBag		153
-#define OBJ_crlBag		OBJ_pkcs12_BagIds,4L
-
-#define LN_secretBag		"secretBag"
-#define NID_secretBag		154
-#define OBJ_secretBag		OBJ_pkcs12_BagIds,5L
-
-#define LN_safeContentsBag		"safeContentsBag"
-#define NID_safeContentsBag		155
-#define OBJ_safeContentsBag		OBJ_pkcs12_BagIds,6L
-
-#define SN_md2		"MD2"
-#define LN_md2		"md2"
-#define NID_md2		3
-#define OBJ_md2		OBJ_rsadsi,2L,2L
-
-#define SN_md4		"MD4"
-#define LN_md4		"md4"
-#define NID_md4		257
-#define OBJ_md4		OBJ_rsadsi,2L,4L
-
-#define SN_md5		"MD5"
-#define LN_md5		"md5"
-#define NID_md5		4
-#define OBJ_md5		OBJ_rsadsi,2L,5L
-
-#define SN_md5_sha1		"MD5-SHA1"
-#define LN_md5_sha1		"md5-sha1"
-#define NID_md5_sha1		114
-
-#define LN_hmacWithSHA1		"hmacWithSHA1"
-#define NID_hmacWithSHA1		163
-#define OBJ_hmacWithSHA1		OBJ_rsadsi,2L,7L
-
-#define SN_rc2_cbc		"RC2-CBC"
-#define LN_rc2_cbc		"rc2-cbc"
-#define NID_rc2_cbc		37
-#define OBJ_rc2_cbc		OBJ_rsadsi,3L,2L
-
-#define SN_rc2_ecb		"RC2-ECB"
-#define LN_rc2_ecb		"rc2-ecb"
-#define NID_rc2_ecb		38
-
-#define SN_rc2_cfb64		"RC2-CFB"
-#define LN_rc2_cfb64		"rc2-cfb"
-#define NID_rc2_cfb64		39
-
-#define SN_rc2_ofb64		"RC2-OFB"
-#define LN_rc2_ofb64		"rc2-ofb"
-#define NID_rc2_ofb64		40
-
-#define SN_rc2_40_cbc		"RC2-40-CBC"
-#define LN_rc2_40_cbc		"rc2-40-cbc"
-#define NID_rc2_40_cbc		98
-
-#define SN_rc2_64_cbc		"RC2-64-CBC"
-#define LN_rc2_64_cbc		"rc2-64-cbc"
-#define NID_rc2_64_cbc		166
-
-#define SN_rc4		"RC4"
-#define LN_rc4		"rc4"
-#define NID_rc4		5
-#define OBJ_rc4		OBJ_rsadsi,3L,4L
-
-#define SN_rc4_40		"RC4-40"
-#define LN_rc4_40		"rc4-40"
-#define NID_rc4_40		97
-
-#define SN_des_ede3_cbc		"DES-EDE3-CBC"
-#define LN_des_ede3_cbc		"des-ede3-cbc"
-#define NID_des_ede3_cbc		44
-#define OBJ_des_ede3_cbc		OBJ_rsadsi,3L,7L
-
-#define SN_rc5_cbc		"RC5-CBC"
-#define LN_rc5_cbc		"rc5-cbc"
-#define NID_rc5_cbc		120
-#define OBJ_rc5_cbc		OBJ_rsadsi,3L,8L
-
-#define SN_rc5_ecb		"RC5-ECB"
-#define LN_rc5_ecb		"rc5-ecb"
-#define NID_rc5_ecb		121
-
-#define SN_rc5_cfb64		"RC5-CFB"
-#define LN_rc5_cfb64		"rc5-cfb"
-#define NID_rc5_cfb64		122
-
-#define SN_rc5_ofb64		"RC5-OFB"
-#define LN_rc5_ofb64		"rc5-ofb"
-#define NID_rc5_ofb64		123
-
-#define SN_ms_ext_req		"msExtReq"
-#define LN_ms_ext_req		"Microsoft Extension Request"
-#define NID_ms_ext_req		171
-#define OBJ_ms_ext_req		1L,3L,6L,1L,4L,1L,311L,2L,1L,14L
-
-#define SN_ms_code_ind		"msCodeInd"
-#define LN_ms_code_ind		"Microsoft Individual Code Signing"
-#define NID_ms_code_ind		134
-#define OBJ_ms_code_ind		1L,3L,6L,1L,4L,1L,311L,2L,1L,21L
-
-#define SN_ms_code_com		"msCodeCom"
-#define LN_ms_code_com		"Microsoft Commercial Code Signing"
-#define NID_ms_code_com		135
-#define OBJ_ms_code_com		1L,3L,6L,1L,4L,1L,311L,2L,1L,22L
-
-#define SN_ms_ctl_sign		"msCTLSign"
-#define LN_ms_ctl_sign		"Microsoft Trust List Signing"
-#define NID_ms_ctl_sign		136
-#define OBJ_ms_ctl_sign		1L,3L,6L,1L,4L,1L,311L,10L,3L,1L
-
-#define SN_ms_sgc		"msSGC"
-#define LN_ms_sgc		"Microsoft Server Gated Crypto"
-#define NID_ms_sgc		137
-#define OBJ_ms_sgc		1L,3L,6L,1L,4L,1L,311L,10L,3L,3L
-
-#define SN_ms_efs		"msEFS"
-#define LN_ms_efs		"Microsoft Encrypted File System"
-#define NID_ms_efs		138
-#define OBJ_ms_efs		1L,3L,6L,1L,4L,1L,311L,10L,3L,4L
-
-#define SN_ms_smartcard_login		"msSmartcardLogin"
-#define LN_ms_smartcard_login		"Microsoft Smartcardlogin"
-#define NID_ms_smartcard_login		648
-#define OBJ_ms_smartcard_login		1L,3L,6L,1L,4L,1L,311L,20L,2L,2L
-
-#define SN_ms_upn		"msUPN"
-#define LN_ms_upn		"Microsoft Universal Principal Name"
-#define NID_ms_upn		649
-#define OBJ_ms_upn		1L,3L,6L,1L,4L,1L,311L,20L,2L,3L
-
-#define SN_idea_cbc		"IDEA-CBC"
-#define LN_idea_cbc		"idea-cbc"
-#define NID_idea_cbc		34
-#define OBJ_idea_cbc		1L,3L,6L,1L,4L,1L,188L,7L,1L,1L,2L
-
-#define SN_idea_ecb		"IDEA-ECB"
-#define LN_idea_ecb		"idea-ecb"
-#define NID_idea_ecb		36
-
-#define SN_idea_cfb64		"IDEA-CFB"
-#define LN_idea_cfb64		"idea-cfb"
-#define NID_idea_cfb64		35
-
-#define SN_idea_ofb64		"IDEA-OFB"
-#define LN_idea_ofb64		"idea-ofb"
-#define NID_idea_ofb64		46
-
-#define SN_bf_cbc		"BF-CBC"
-#define LN_bf_cbc		"bf-cbc"
-#define NID_bf_cbc		91
-#define OBJ_bf_cbc		1L,3L,6L,1L,4L,1L,3029L,1L,2L
-
-#define SN_bf_ecb		"BF-ECB"
-#define LN_bf_ecb		"bf-ecb"
-#define NID_bf_ecb		92
-
-#define SN_bf_cfb64		"BF-CFB"
-#define LN_bf_cfb64		"bf-cfb"
-#define NID_bf_cfb64		93
-
-#define SN_bf_ofb64		"BF-OFB"
-#define LN_bf_ofb64		"bf-ofb"
-#define NID_bf_ofb64		94
-
-#define SN_id_pkix		"PKIX"
-#define NID_id_pkix		127
-#define OBJ_id_pkix		1L,3L,6L,1L,5L,5L,7L
-
-#define SN_id_pkix_mod		"id-pkix-mod"
-#define NID_id_pkix_mod		258
-#define OBJ_id_pkix_mod		OBJ_id_pkix,0L
-
-#define SN_id_pe		"id-pe"
-#define NID_id_pe		175
-#define OBJ_id_pe		OBJ_id_pkix,1L
-
-#define SN_id_qt		"id-qt"
-#define NID_id_qt		259
-#define OBJ_id_qt		OBJ_id_pkix,2L
-
-#define SN_id_kp		"id-kp"
-#define NID_id_kp		128
-#define OBJ_id_kp		OBJ_id_pkix,3L
-
-#define SN_id_it		"id-it"
-#define NID_id_it		260
-#define OBJ_id_it		OBJ_id_pkix,4L
-
-#define SN_id_pkip		"id-pkip"
-#define NID_id_pkip		261
-#define OBJ_id_pkip		OBJ_id_pkix,5L
-
-#define SN_id_alg		"id-alg"
-#define NID_id_alg		262
-#define OBJ_id_alg		OBJ_id_pkix,6L
-
-#define SN_id_cmc		"id-cmc"
-#define NID_id_cmc		263
-#define OBJ_id_cmc		OBJ_id_pkix,7L
-
-#define SN_id_on		"id-on"
-#define NID_id_on		264
-#define OBJ_id_on		OBJ_id_pkix,8L
-
-#define SN_id_pda		"id-pda"
-#define NID_id_pda		265
-#define OBJ_id_pda		OBJ_id_pkix,9L
-
-#define SN_id_aca		"id-aca"
-#define NID_id_aca		266
-#define OBJ_id_aca		OBJ_id_pkix,10L
-
-#define SN_id_qcs		"id-qcs"
-#define NID_id_qcs		267
-#define OBJ_id_qcs		OBJ_id_pkix,11L
-
-#define SN_id_cct		"id-cct"
-#define NID_id_cct		268
-#define OBJ_id_cct		OBJ_id_pkix,12L
-
-#define SN_id_ppl		"id-ppl"
-#define NID_id_ppl		662
-#define OBJ_id_ppl		OBJ_id_pkix,21L
-
-#define SN_id_ad		"id-ad"
-#define NID_id_ad		176
-#define OBJ_id_ad		OBJ_id_pkix,48L
-
-#define SN_id_pkix1_explicit_88		"id-pkix1-explicit-88"
-#define NID_id_pkix1_explicit_88		269
-#define OBJ_id_pkix1_explicit_88		OBJ_id_pkix_mod,1L
-
-#define SN_id_pkix1_implicit_88		"id-pkix1-implicit-88"
-#define NID_id_pkix1_implicit_88		270
-#define OBJ_id_pkix1_implicit_88		OBJ_id_pkix_mod,2L
-
-#define SN_id_pkix1_explicit_93		"id-pkix1-explicit-93"
-#define NID_id_pkix1_explicit_93		271
-#define OBJ_id_pkix1_explicit_93		OBJ_id_pkix_mod,3L
-
-#define SN_id_pkix1_implicit_93		"id-pkix1-implicit-93"
-#define NID_id_pkix1_implicit_93		272
-#define OBJ_id_pkix1_implicit_93		OBJ_id_pkix_mod,4L
-
-#define SN_id_mod_crmf		"id-mod-crmf"
-#define NID_id_mod_crmf		273
-#define OBJ_id_mod_crmf		OBJ_id_pkix_mod,5L
-
-#define SN_id_mod_cmc		"id-mod-cmc"
-#define NID_id_mod_cmc		274
-#define OBJ_id_mod_cmc		OBJ_id_pkix_mod,6L
-
-#define SN_id_mod_kea_profile_88		"id-mod-kea-profile-88"
-#define NID_id_mod_kea_profile_88		275
-#define OBJ_id_mod_kea_profile_88		OBJ_id_pkix_mod,7L
-
-#define SN_id_mod_kea_profile_93		"id-mod-kea-profile-93"
-#define NID_id_mod_kea_profile_93		276
-#define OBJ_id_mod_kea_profile_93		OBJ_id_pkix_mod,8L
-
-#define SN_id_mod_cmp		"id-mod-cmp"
-#define NID_id_mod_cmp		277
-#define OBJ_id_mod_cmp		OBJ_id_pkix_mod,9L
-
-#define SN_id_mod_qualified_cert_88		"id-mod-qualified-cert-88"
-#define NID_id_mod_qualified_cert_88		278
-#define OBJ_id_mod_qualified_cert_88		OBJ_id_pkix_mod,10L
-
-#define SN_id_mod_qualified_cert_93		"id-mod-qualified-cert-93"
-#define NID_id_mod_qualified_cert_93		279
-#define OBJ_id_mod_qualified_cert_93		OBJ_id_pkix_mod,11L
-
-#define SN_id_mod_attribute_cert		"id-mod-attribute-cert"
-#define NID_id_mod_attribute_cert		280
-#define OBJ_id_mod_attribute_cert		OBJ_id_pkix_mod,12L
-
-#define SN_id_mod_timestamp_protocol		"id-mod-timestamp-protocol"
-#define NID_id_mod_timestamp_protocol		281
-#define OBJ_id_mod_timestamp_protocol		OBJ_id_pkix_mod,13L
-
-#define SN_id_mod_ocsp		"id-mod-ocsp"
-#define NID_id_mod_ocsp		282
-#define OBJ_id_mod_ocsp		OBJ_id_pkix_mod,14L
-
-#define SN_id_mod_dvcs		"id-mod-dvcs"
-#define NID_id_mod_dvcs		283
-#define OBJ_id_mod_dvcs		OBJ_id_pkix_mod,15L
-
-#define SN_id_mod_cmp2000		"id-mod-cmp2000"
-#define NID_id_mod_cmp2000		284
-#define OBJ_id_mod_cmp2000		OBJ_id_pkix_mod,16L
-
-#define SN_info_access		"authorityInfoAccess"
-#define LN_info_access		"Authority Information Access"
-#define NID_info_access		177
-#define OBJ_info_access		OBJ_id_pe,1L
-
-#define SN_biometricInfo		"biometricInfo"
-#define LN_biometricInfo		"Biometric Info"
-#define NID_biometricInfo		285
-#define OBJ_biometricInfo		OBJ_id_pe,2L
-
-#define SN_qcStatements		"qcStatements"
-#define NID_qcStatements		286
-#define OBJ_qcStatements		OBJ_id_pe,3L
-
-#define SN_ac_auditEntity		"ac-auditEntity"
-#define NID_ac_auditEntity		287
-#define OBJ_ac_auditEntity		OBJ_id_pe,4L
-
-#define SN_ac_targeting		"ac-targeting"
-#define NID_ac_targeting		288
-#define OBJ_ac_targeting		OBJ_id_pe,5L
-
-#define SN_aaControls		"aaControls"
-#define NID_aaControls		289
-#define OBJ_aaControls		OBJ_id_pe,6L
-
-#define SN_sbgp_ipAddrBlock		"sbgp-ipAddrBlock"
-#define NID_sbgp_ipAddrBlock		290
-#define OBJ_sbgp_ipAddrBlock		OBJ_id_pe,7L
-
-#define SN_sbgp_autonomousSysNum		"sbgp-autonomousSysNum"
-#define NID_sbgp_autonomousSysNum		291
-#define OBJ_sbgp_autonomousSysNum		OBJ_id_pe,8L
-
-#define SN_sbgp_routerIdentifier		"sbgp-routerIdentifier"
-#define NID_sbgp_routerIdentifier		292
-#define OBJ_sbgp_routerIdentifier		OBJ_id_pe,9L
-
-#define SN_ac_proxying		"ac-proxying"
-#define NID_ac_proxying		397
-#define OBJ_ac_proxying		OBJ_id_pe,10L
-
-#define SN_sinfo_access		"subjectInfoAccess"
-#define LN_sinfo_access		"Subject Information Access"
-#define NID_sinfo_access		398
-#define OBJ_sinfo_access		OBJ_id_pe,11L
-
-#define SN_proxyCertInfo		"proxyCertInfo"
-#define LN_proxyCertInfo		"Proxy Certificate Information"
-#define NID_proxyCertInfo		663
-#define OBJ_proxyCertInfo		OBJ_id_pe,14L
-
-#define SN_id_qt_cps		"id-qt-cps"
-#define LN_id_qt_cps		"Policy Qualifier CPS"
-#define NID_id_qt_cps		164
-#define OBJ_id_qt_cps		OBJ_id_qt,1L
-
-#define SN_id_qt_unotice		"id-qt-unotice"
-#define LN_id_qt_unotice		"Policy Qualifier User Notice"
-#define NID_id_qt_unotice		165
-#define OBJ_id_qt_unotice		OBJ_id_qt,2L
-
-#define SN_textNotice		"textNotice"
-#define NID_textNotice		293
-#define OBJ_textNotice		OBJ_id_qt,3L
-
-#define SN_server_auth		"serverAuth"
-#define LN_server_auth		"TLS Web Server Authentication"
-#define NID_server_auth		129
-#define OBJ_server_auth		OBJ_id_kp,1L
-
-#define SN_client_auth		"clientAuth"
-#define LN_client_auth		"TLS Web Client Authentication"
-#define NID_client_auth		130
-#define OBJ_client_auth		OBJ_id_kp,2L
-
-#define SN_code_sign		"codeSigning"
-#define LN_code_sign		"Code Signing"
-#define NID_code_sign		131
-#define OBJ_code_sign		OBJ_id_kp,3L
-
-#define SN_email_protect		"emailProtection"
-#define LN_email_protect		"E-mail Protection"
-#define NID_email_protect		132
-#define OBJ_email_protect		OBJ_id_kp,4L
-
-#define SN_ipsecEndSystem		"ipsecEndSystem"
-#define LN_ipsecEndSystem		"IPSec End System"
-#define NID_ipsecEndSystem		294
-#define OBJ_ipsecEndSystem		OBJ_id_kp,5L
-
-#define SN_ipsecTunnel		"ipsecTunnel"
-#define LN_ipsecTunnel		"IPSec Tunnel"
-#define NID_ipsecTunnel		295
-#define OBJ_ipsecTunnel		OBJ_id_kp,6L
-
-#define SN_ipsecUser		"ipsecUser"
-#define LN_ipsecUser		"IPSec User"
-#define NID_ipsecUser		296
-#define OBJ_ipsecUser		OBJ_id_kp,7L
-
-#define SN_time_stamp		"timeStamping"
-#define LN_time_stamp		"Time Stamping"
-#define NID_time_stamp		133
-#define OBJ_time_stamp		OBJ_id_kp,8L
-
-#define SN_OCSP_sign		"OCSPSigning"
-#define LN_OCSP_sign		"OCSP Signing"
-#define NID_OCSP_sign		180
-#define OBJ_OCSP_sign		OBJ_id_kp,9L
-
-#define SN_dvcs		"DVCS"
-#define LN_dvcs		"dvcs"
-#define NID_dvcs		297
-#define OBJ_dvcs		OBJ_id_kp,10L
-
-#define SN_id_it_caProtEncCert		"id-it-caProtEncCert"
-#define NID_id_it_caProtEncCert		298
-#define OBJ_id_it_caProtEncCert		OBJ_id_it,1L
-
-#define SN_id_it_signKeyPairTypes		"id-it-signKeyPairTypes"
-#define NID_id_it_signKeyPairTypes		299
-#define OBJ_id_it_signKeyPairTypes		OBJ_id_it,2L
-
-#define SN_id_it_encKeyPairTypes		"id-it-encKeyPairTypes"
-#define NID_id_it_encKeyPairTypes		300
-#define OBJ_id_it_encKeyPairTypes		OBJ_id_it,3L
-
-#define SN_id_it_preferredSymmAlg		"id-it-preferredSymmAlg"
-#define NID_id_it_preferredSymmAlg		301
-#define OBJ_id_it_preferredSymmAlg		OBJ_id_it,4L
-
-#define SN_id_it_caKeyUpdateInfo		"id-it-caKeyUpdateInfo"
-#define NID_id_it_caKeyUpdateInfo		302
-#define OBJ_id_it_caKeyUpdateInfo		OBJ_id_it,5L
-
-#define SN_id_it_currentCRL		"id-it-currentCRL"
-#define NID_id_it_currentCRL		303
-#define OBJ_id_it_currentCRL		OBJ_id_it,6L
-
-#define SN_id_it_unsupportedOIDs		"id-it-unsupportedOIDs"
-#define NID_id_it_unsupportedOIDs		304
-#define OBJ_id_it_unsupportedOIDs		OBJ_id_it,7L
-
-#define SN_id_it_subscriptionRequest		"id-it-subscriptionRequest"
-#define NID_id_it_subscriptionRequest		305
-#define OBJ_id_it_subscriptionRequest		OBJ_id_it,8L
-
-#define SN_id_it_subscriptionResponse		"id-it-subscriptionResponse"
-#define NID_id_it_subscriptionResponse		306
-#define OBJ_id_it_subscriptionResponse		OBJ_id_it,9L
-
-#define SN_id_it_keyPairParamReq		"id-it-keyPairParamReq"
-#define NID_id_it_keyPairParamReq		307
-#define OBJ_id_it_keyPairParamReq		OBJ_id_it,10L
-
-#define SN_id_it_keyPairParamRep		"id-it-keyPairParamRep"
-#define NID_id_it_keyPairParamRep		308
-#define OBJ_id_it_keyPairParamRep		OBJ_id_it,11L
-
-#define SN_id_it_revPassphrase		"id-it-revPassphrase"
-#define NID_id_it_revPassphrase		309
-#define OBJ_id_it_revPassphrase		OBJ_id_it,12L
-
-#define SN_id_it_implicitConfirm		"id-it-implicitConfirm"
-#define NID_id_it_implicitConfirm		310
-#define OBJ_id_it_implicitConfirm		OBJ_id_it,13L
-
-#define SN_id_it_confirmWaitTime		"id-it-confirmWaitTime"
-#define NID_id_it_confirmWaitTime		311
-#define OBJ_id_it_confirmWaitTime		OBJ_id_it,14L
-
-#define SN_id_it_origPKIMessage		"id-it-origPKIMessage"
-#define NID_id_it_origPKIMessage		312
-#define OBJ_id_it_origPKIMessage		OBJ_id_it,15L
-
-#define SN_id_regCtrl		"id-regCtrl"
-#define NID_id_regCtrl		313
-#define OBJ_id_regCtrl		OBJ_id_pkip,1L
-
-#define SN_id_regInfo		"id-regInfo"
-#define NID_id_regInfo		314
-#define OBJ_id_regInfo		OBJ_id_pkip,2L
-
-#define SN_id_regCtrl_regToken		"id-regCtrl-regToken"
-#define NID_id_regCtrl_regToken		315
-#define OBJ_id_regCtrl_regToken		OBJ_id_regCtrl,1L
-
-#define SN_id_regCtrl_authenticator		"id-regCtrl-authenticator"
-#define NID_id_regCtrl_authenticator		316
-#define OBJ_id_regCtrl_authenticator		OBJ_id_regCtrl,2L
-
-#define SN_id_regCtrl_pkiPublicationInfo		"id-regCtrl-pkiPublicationInfo"
-#define NID_id_regCtrl_pkiPublicationInfo		317
-#define OBJ_id_regCtrl_pkiPublicationInfo		OBJ_id_regCtrl,3L
-
-#define SN_id_regCtrl_pkiArchiveOptions		"id-regCtrl-pkiArchiveOptions"
-#define NID_id_regCtrl_pkiArchiveOptions		318
-#define OBJ_id_regCtrl_pkiArchiveOptions		OBJ_id_regCtrl,4L
-
-#define SN_id_regCtrl_oldCertID		"id-regCtrl-oldCertID"
-#define NID_id_regCtrl_oldCertID		319
-#define OBJ_id_regCtrl_oldCertID		OBJ_id_regCtrl,5L
-
-#define SN_id_regCtrl_protocolEncrKey		"id-regCtrl-protocolEncrKey"
-#define NID_id_regCtrl_protocolEncrKey		320
-#define OBJ_id_regCtrl_protocolEncrKey		OBJ_id_regCtrl,6L
-
-#define SN_id_regInfo_utf8Pairs		"id-regInfo-utf8Pairs"
-#define NID_id_regInfo_utf8Pairs		321
-#define OBJ_id_regInfo_utf8Pairs		OBJ_id_regInfo,1L
-
-#define SN_id_regInfo_certReq		"id-regInfo-certReq"
-#define NID_id_regInfo_certReq		322
-#define OBJ_id_regInfo_certReq		OBJ_id_regInfo,2L
-
-#define SN_id_alg_des40		"id-alg-des40"
-#define NID_id_alg_des40		323
-#define OBJ_id_alg_des40		OBJ_id_alg,1L
-
-#define SN_id_alg_noSignature		"id-alg-noSignature"
-#define NID_id_alg_noSignature		324
-#define OBJ_id_alg_noSignature		OBJ_id_alg,2L
-
-#define SN_id_alg_dh_sig_hmac_sha1		"id-alg-dh-sig-hmac-sha1"
-#define NID_id_alg_dh_sig_hmac_sha1		325
-#define OBJ_id_alg_dh_sig_hmac_sha1		OBJ_id_alg,3L
-
-#define SN_id_alg_dh_pop		"id-alg-dh-pop"
-#define NID_id_alg_dh_pop		326
-#define OBJ_id_alg_dh_pop		OBJ_id_alg,4L
-
-#define SN_id_cmc_statusInfo		"id-cmc-statusInfo"
-#define NID_id_cmc_statusInfo		327
-#define OBJ_id_cmc_statusInfo		OBJ_id_cmc,1L
-
-#define SN_id_cmc_identification		"id-cmc-identification"
-#define NID_id_cmc_identification		328
-#define OBJ_id_cmc_identification		OBJ_id_cmc,2L
-
-#define SN_id_cmc_identityProof		"id-cmc-identityProof"
-#define NID_id_cmc_identityProof		329
-#define OBJ_id_cmc_identityProof		OBJ_id_cmc,3L
-
-#define SN_id_cmc_dataReturn		"id-cmc-dataReturn"
-#define NID_id_cmc_dataReturn		330
-#define OBJ_id_cmc_dataReturn		OBJ_id_cmc,4L
-
-#define SN_id_cmc_transactionId		"id-cmc-transactionId"
-#define NID_id_cmc_transactionId		331
-#define OBJ_id_cmc_transactionId		OBJ_id_cmc,5L
-
-#define SN_id_cmc_senderNonce		"id-cmc-senderNonce"
-#define NID_id_cmc_senderNonce		332
-#define OBJ_id_cmc_senderNonce		OBJ_id_cmc,6L
-
-#define SN_id_cmc_recipientNonce		"id-cmc-recipientNonce"
-#define NID_id_cmc_recipientNonce		333
-#define OBJ_id_cmc_recipientNonce		OBJ_id_cmc,7L
-
-#define SN_id_cmc_addExtensions		"id-cmc-addExtensions"
-#define NID_id_cmc_addExtensions		334
-#define OBJ_id_cmc_addExtensions		OBJ_id_cmc,8L
-
-#define SN_id_cmc_encryptedPOP		"id-cmc-encryptedPOP"
-#define NID_id_cmc_encryptedPOP		335
-#define OBJ_id_cmc_encryptedPOP		OBJ_id_cmc,9L
-
-#define SN_id_cmc_decryptedPOP		"id-cmc-decryptedPOP"
-#define NID_id_cmc_decryptedPOP		336
-#define OBJ_id_cmc_decryptedPOP		OBJ_id_cmc,10L
-
-#define SN_id_cmc_lraPOPWitness		"id-cmc-lraPOPWitness"
-#define NID_id_cmc_lraPOPWitness		337
-#define OBJ_id_cmc_lraPOPWitness		OBJ_id_cmc,11L
-
-#define SN_id_cmc_getCert		"id-cmc-getCert"
-#define NID_id_cmc_getCert		338
-#define OBJ_id_cmc_getCert		OBJ_id_cmc,15L
-
-#define SN_id_cmc_getCRL		"id-cmc-getCRL"
-#define NID_id_cmc_getCRL		339
-#define OBJ_id_cmc_getCRL		OBJ_id_cmc,16L
-
-#define SN_id_cmc_revokeRequest		"id-cmc-revokeRequest"
-#define NID_id_cmc_revokeRequest		340
-#define OBJ_id_cmc_revokeRequest		OBJ_id_cmc,17L
-
-#define SN_id_cmc_regInfo		"id-cmc-regInfo"
-#define NID_id_cmc_regInfo		341
-#define OBJ_id_cmc_regInfo		OBJ_id_cmc,18L
-
-#define SN_id_cmc_responseInfo		"id-cmc-responseInfo"
-#define NID_id_cmc_responseInfo		342
-#define OBJ_id_cmc_responseInfo		OBJ_id_cmc,19L
-
-#define SN_id_cmc_queryPending		"id-cmc-queryPending"
-#define NID_id_cmc_queryPending		343
-#define OBJ_id_cmc_queryPending		OBJ_id_cmc,21L
-
-#define SN_id_cmc_popLinkRandom		"id-cmc-popLinkRandom"
-#define NID_id_cmc_popLinkRandom		344
-#define OBJ_id_cmc_popLinkRandom		OBJ_id_cmc,22L
-
-#define SN_id_cmc_popLinkWitness		"id-cmc-popLinkWitness"
-#define NID_id_cmc_popLinkWitness		345
-#define OBJ_id_cmc_popLinkWitness		OBJ_id_cmc,23L
-
-#define SN_id_cmc_confirmCertAcceptance		"id-cmc-confirmCertAcceptance"
-#define NID_id_cmc_confirmCertAcceptance		346
-#define OBJ_id_cmc_confirmCertAcceptance		OBJ_id_cmc,24L
-
-#define SN_id_on_personalData		"id-on-personalData"
-#define NID_id_on_personalData		347
-#define OBJ_id_on_personalData		OBJ_id_on,1L
-
-#define SN_id_pda_dateOfBirth		"id-pda-dateOfBirth"
-#define NID_id_pda_dateOfBirth		348
-#define OBJ_id_pda_dateOfBirth		OBJ_id_pda,1L
-
-#define SN_id_pda_placeOfBirth		"id-pda-placeOfBirth"
-#define NID_id_pda_placeOfBirth		349
-#define OBJ_id_pda_placeOfBirth		OBJ_id_pda,2L
-
-#define SN_id_pda_gender		"id-pda-gender"
-#define NID_id_pda_gender		351
-#define OBJ_id_pda_gender		OBJ_id_pda,3L
-
-#define SN_id_pda_countryOfCitizenship		"id-pda-countryOfCitizenship"
-#define NID_id_pda_countryOfCitizenship		352
-#define OBJ_id_pda_countryOfCitizenship		OBJ_id_pda,4L
-
-#define SN_id_pda_countryOfResidence		"id-pda-countryOfResidence"
-#define NID_id_pda_countryOfResidence		353
-#define OBJ_id_pda_countryOfResidence		OBJ_id_pda,5L
-
-#define SN_id_aca_authenticationInfo		"id-aca-authenticationInfo"
-#define NID_id_aca_authenticationInfo		354
-#define OBJ_id_aca_authenticationInfo		OBJ_id_aca,1L
-
-#define SN_id_aca_accessIdentity		"id-aca-accessIdentity"
-#define NID_id_aca_accessIdentity		355
-#define OBJ_id_aca_accessIdentity		OBJ_id_aca,2L
-
-#define SN_id_aca_chargingIdentity		"id-aca-chargingIdentity"
-#define NID_id_aca_chargingIdentity		356
-#define OBJ_id_aca_chargingIdentity		OBJ_id_aca,3L
-
-#define SN_id_aca_group		"id-aca-group"
-#define NID_id_aca_group		357
-#define OBJ_id_aca_group		OBJ_id_aca,4L
-
-#define SN_id_aca_role		"id-aca-role"
-#define NID_id_aca_role		358
-#define OBJ_id_aca_role		OBJ_id_aca,5L
-
-#define SN_id_aca_encAttrs		"id-aca-encAttrs"
-#define NID_id_aca_encAttrs		399
-#define OBJ_id_aca_encAttrs		OBJ_id_aca,6L
-
-#define SN_id_qcs_pkixQCSyntax_v1		"id-qcs-pkixQCSyntax-v1"
-#define NID_id_qcs_pkixQCSyntax_v1		359
-#define OBJ_id_qcs_pkixQCSyntax_v1		OBJ_id_qcs,1L
-
-#define SN_id_cct_crs		"id-cct-crs"
-#define NID_id_cct_crs		360
-#define OBJ_id_cct_crs		OBJ_id_cct,1L
-
-#define SN_id_cct_PKIData		"id-cct-PKIData"
-#define NID_id_cct_PKIData		361
-#define OBJ_id_cct_PKIData		OBJ_id_cct,2L
-
-#define SN_id_cct_PKIResponse		"id-cct-PKIResponse"
-#define NID_id_cct_PKIResponse		362
-#define OBJ_id_cct_PKIResponse		OBJ_id_cct,3L
-
-#define SN_id_ppl_anyLanguage		"id-ppl-anyLanguage"
-#define LN_id_ppl_anyLanguage		"Any language"
-#define NID_id_ppl_anyLanguage		664
-#define OBJ_id_ppl_anyLanguage		OBJ_id_ppl,0L
-
-#define SN_id_ppl_inheritAll		"id-ppl-inheritAll"
-#define LN_id_ppl_inheritAll		"Inherit all"
-#define NID_id_ppl_inheritAll		665
-#define OBJ_id_ppl_inheritAll		OBJ_id_ppl,1L
-
-#define SN_Independent		"id-ppl-independent"
-#define LN_Independent		"Independent"
-#define NID_Independent		667
-#define OBJ_Independent		OBJ_id_ppl,2L
-
-#define SN_ad_OCSP		"OCSP"
-#define LN_ad_OCSP		"OCSP"
-#define NID_ad_OCSP		178
-#define OBJ_ad_OCSP		OBJ_id_ad,1L
-
-#define SN_ad_ca_issuers		"caIssuers"
-#define LN_ad_ca_issuers		"CA Issuers"
-#define NID_ad_ca_issuers		179
-#define OBJ_ad_ca_issuers		OBJ_id_ad,2L
-
-#define SN_ad_timeStamping		"ad_timestamping"
-#define LN_ad_timeStamping		"AD Time Stamping"
-#define NID_ad_timeStamping		363
-#define OBJ_ad_timeStamping		OBJ_id_ad,3L
-
-#define SN_ad_dvcs		"AD_DVCS"
-#define LN_ad_dvcs		"ad dvcs"
-#define NID_ad_dvcs		364
-#define OBJ_ad_dvcs		OBJ_id_ad,4L
-
-#define OBJ_id_pkix_OCSP		OBJ_ad_OCSP
-
-#define SN_id_pkix_OCSP_basic		"basicOCSPResponse"
-#define LN_id_pkix_OCSP_basic		"Basic OCSP Response"
-#define NID_id_pkix_OCSP_basic		365
-#define OBJ_id_pkix_OCSP_basic		OBJ_id_pkix_OCSP,1L
-
-#define SN_id_pkix_OCSP_Nonce		"Nonce"
-#define LN_id_pkix_OCSP_Nonce		"OCSP Nonce"
-#define NID_id_pkix_OCSP_Nonce		366
-#define OBJ_id_pkix_OCSP_Nonce		OBJ_id_pkix_OCSP,2L
-
-#define SN_id_pkix_OCSP_CrlID		"CrlID"
-#define LN_id_pkix_OCSP_CrlID		"OCSP CRL ID"
-#define NID_id_pkix_OCSP_CrlID		367
-#define OBJ_id_pkix_OCSP_CrlID		OBJ_id_pkix_OCSP,3L
-
-#define SN_id_pkix_OCSP_acceptableResponses		"acceptableResponses"
-#define LN_id_pkix_OCSP_acceptableResponses		"Acceptable OCSP Responses"
-#define NID_id_pkix_OCSP_acceptableResponses		368
-#define OBJ_id_pkix_OCSP_acceptableResponses		OBJ_id_pkix_OCSP,4L
-
-#define SN_id_pkix_OCSP_noCheck		"noCheck"
-#define LN_id_pkix_OCSP_noCheck		"OCSP No Check"
-#define NID_id_pkix_OCSP_noCheck		369
-#define OBJ_id_pkix_OCSP_noCheck		OBJ_id_pkix_OCSP,5L
-
-#define SN_id_pkix_OCSP_archiveCutoff		"archiveCutoff"
-#define LN_id_pkix_OCSP_archiveCutoff		"OCSP Archive Cutoff"
-#define NID_id_pkix_OCSP_archiveCutoff		370
-#define OBJ_id_pkix_OCSP_archiveCutoff		OBJ_id_pkix_OCSP,6L
-
-#define SN_id_pkix_OCSP_serviceLocator		"serviceLocator"
-#define LN_id_pkix_OCSP_serviceLocator		"OCSP Service Locator"
-#define NID_id_pkix_OCSP_serviceLocator		371
-#define OBJ_id_pkix_OCSP_serviceLocator		OBJ_id_pkix_OCSP,7L
-
-#define SN_id_pkix_OCSP_extendedStatus		"extendedStatus"
-#define LN_id_pkix_OCSP_extendedStatus		"Extended OCSP Status"
-#define NID_id_pkix_OCSP_extendedStatus		372
-#define OBJ_id_pkix_OCSP_extendedStatus		OBJ_id_pkix_OCSP,8L
-
-#define SN_id_pkix_OCSP_valid		"valid"
-#define NID_id_pkix_OCSP_valid		373
-#define OBJ_id_pkix_OCSP_valid		OBJ_id_pkix_OCSP,9L
-
-#define SN_id_pkix_OCSP_path		"path"
-#define NID_id_pkix_OCSP_path		374
-#define OBJ_id_pkix_OCSP_path		OBJ_id_pkix_OCSP,10L
-
-#define SN_id_pkix_OCSP_trustRoot		"trustRoot"
-#define LN_id_pkix_OCSP_trustRoot		"Trust Root"
-#define NID_id_pkix_OCSP_trustRoot		375
-#define OBJ_id_pkix_OCSP_trustRoot		OBJ_id_pkix_OCSP,11L
-
-#define SN_algorithm		"algorithm"
-#define LN_algorithm		"algorithm"
-#define NID_algorithm		376
-#define OBJ_algorithm		1L,3L,14L,3L,2L
-
-#define SN_md5WithRSA		"RSA-NP-MD5"
-#define LN_md5WithRSA		"md5WithRSA"
-#define NID_md5WithRSA		104
-#define OBJ_md5WithRSA		OBJ_algorithm,3L
-
-#define SN_des_ecb		"DES-ECB"
-#define LN_des_ecb		"des-ecb"
-#define NID_des_ecb		29
-#define OBJ_des_ecb		OBJ_algorithm,6L
-
-#define SN_des_cbc		"DES-CBC"
-#define LN_des_cbc		"des-cbc"
-#define NID_des_cbc		31
-#define OBJ_des_cbc		OBJ_algorithm,7L
-
-#define SN_des_ofb64		"DES-OFB"
-#define LN_des_ofb64		"des-ofb"
-#define NID_des_ofb64		45
-#define OBJ_des_ofb64		OBJ_algorithm,8L
-
-#define SN_des_cfb64		"DES-CFB"
-#define LN_des_cfb64		"des-cfb"
-#define NID_des_cfb64		30
-#define OBJ_des_cfb64		OBJ_algorithm,9L
-
-#define SN_rsaSignature		"rsaSignature"
-#define NID_rsaSignature		377
-#define OBJ_rsaSignature		OBJ_algorithm,11L
-
-#define SN_dsa_2		"DSA-old"
-#define LN_dsa_2		"dsaEncryption-old"
-#define NID_dsa_2		67
-#define OBJ_dsa_2		OBJ_algorithm,12L
-
-#define SN_dsaWithSHA		"DSA-SHA"
-#define LN_dsaWithSHA		"dsaWithSHA"
-#define NID_dsaWithSHA		66
-#define OBJ_dsaWithSHA		OBJ_algorithm,13L
-
-#define SN_shaWithRSAEncryption		"RSA-SHA"
-#define LN_shaWithRSAEncryption		"shaWithRSAEncryption"
-#define NID_shaWithRSAEncryption		42
-#define OBJ_shaWithRSAEncryption		OBJ_algorithm,15L
-
-#define SN_des_ede_ecb		"DES-EDE"
-#define LN_des_ede_ecb		"des-ede"
-#define NID_des_ede_ecb		32
-#define OBJ_des_ede_ecb		OBJ_algorithm,17L
-
-#define SN_des_ede3_ecb		"DES-EDE3"
-#define LN_des_ede3_ecb		"des-ede3"
-#define NID_des_ede3_ecb		33
-
-#define SN_des_ede_cbc		"DES-EDE-CBC"
-#define LN_des_ede_cbc		"des-ede-cbc"
-#define NID_des_ede_cbc		43
-
-#define SN_des_ede_cfb64		"DES-EDE-CFB"
-#define LN_des_ede_cfb64		"des-ede-cfb"
-#define NID_des_ede_cfb64		60
-
-#define SN_des_ede3_cfb64		"DES-EDE3-CFB"
-#define LN_des_ede3_cfb64		"des-ede3-cfb"
-#define NID_des_ede3_cfb64		61
-
-#define SN_des_ede_ofb64		"DES-EDE-OFB"
-#define LN_des_ede_ofb64		"des-ede-ofb"
-#define NID_des_ede_ofb64		62
-
-#define SN_des_ede3_ofb64		"DES-EDE3-OFB"
-#define LN_des_ede3_ofb64		"des-ede3-ofb"
-#define NID_des_ede3_ofb64		63
-
-#define SN_desx_cbc		"DESX-CBC"
-#define LN_desx_cbc		"desx-cbc"
-#define NID_desx_cbc		80
-
-#define SN_sha		"SHA"
-#define LN_sha		"sha"
-#define NID_sha		41
-#define OBJ_sha		OBJ_algorithm,18L
-
-#define SN_sha1		"SHA1"
-#define LN_sha1		"sha1"
-#define NID_sha1		64
-#define OBJ_sha1		OBJ_algorithm,26L
-
-#define SN_dsaWithSHA1_2		"DSA-SHA1-old"
-#define LN_dsaWithSHA1_2		"dsaWithSHA1-old"
-#define NID_dsaWithSHA1_2		70
-#define OBJ_dsaWithSHA1_2		OBJ_algorithm,27L
-
-#define SN_sha1WithRSA		"RSA-SHA1-2"
-#define LN_sha1WithRSA		"sha1WithRSA"
-#define NID_sha1WithRSA		115
-#define OBJ_sha1WithRSA		OBJ_algorithm,29L
-
-#define SN_ripemd160		"RIPEMD160"
-#define LN_ripemd160		"ripemd160"
-#define NID_ripemd160		117
-#define OBJ_ripemd160		1L,3L,36L,3L,2L,1L
-
-#define SN_ripemd160WithRSA		"RSA-RIPEMD160"
-#define LN_ripemd160WithRSA		"ripemd160WithRSA"
-#define NID_ripemd160WithRSA		119
-#define OBJ_ripemd160WithRSA		1L,3L,36L,3L,3L,1L,2L
-
-#define SN_sxnet		"SXNetID"
-#define LN_sxnet		"Strong Extranet ID"
-#define NID_sxnet		143
-#define OBJ_sxnet		1L,3L,101L,1L,4L,1L
-
-#define SN_X500		"X500"
-#define LN_X500		"directory services (X.500)"
-#define NID_X500		11
-#define OBJ_X500		2L,5L
-
-#define SN_X509		"X509"
-#define NID_X509		12
-#define OBJ_X509		OBJ_X500,4L
-
-#define SN_commonName		"CN"
-#define LN_commonName		"commonName"
-#define NID_commonName		13
-#define OBJ_commonName		OBJ_X509,3L
-
-#define SN_surname		"SN"
-#define LN_surname		"surname"
-#define NID_surname		100
-#define OBJ_surname		OBJ_X509,4L
-
-#define LN_serialNumber		"serialNumber"
-#define NID_serialNumber		105
-#define OBJ_serialNumber		OBJ_X509,5L
-
-#define SN_countryName		"C"
-#define LN_countryName		"countryName"
-#define NID_countryName		14
-#define OBJ_countryName		OBJ_X509,6L
-
-#define SN_localityName		"L"
-#define LN_localityName		"localityName"
-#define NID_localityName		15
-#define OBJ_localityName		OBJ_X509,7L
-
-#define SN_stateOrProvinceName		"ST"
-#define LN_stateOrProvinceName		"stateOrProvinceName"
-#define NID_stateOrProvinceName		16
-#define OBJ_stateOrProvinceName		OBJ_X509,8L
-
-#define LN_streetAddress		"streetAddress"
-#define NID_streetAddress		660
-#define OBJ_streetAddress		OBJ_X509,9L
-
-#define SN_organizationName		"O"
-#define LN_organizationName		"organizationName"
-#define NID_organizationName		17
-#define OBJ_organizationName		OBJ_X509,10L
-
-#define SN_organizationalUnitName		"OU"
-#define LN_organizationalUnitName		"organizationalUnitName"
-#define NID_organizationalUnitName		18
-#define OBJ_organizationalUnitName		OBJ_X509,11L
-
-#define LN_title		"title"
-#define NID_title		106
-#define OBJ_title		OBJ_X509,12L
-
-#define LN_description		"description"
-#define NID_description		107
-#define OBJ_description		OBJ_X509,13L
-
-#define LN_postalCode		"postalCode"
-#define NID_postalCode		661
-#define OBJ_postalCode		OBJ_X509,17L
-
-#define SN_name		"name"
-#define LN_name		"name"
-#define NID_name		173
-#define OBJ_name		OBJ_X509,41L
-
-#define SN_givenName		"GN"
-#define LN_givenName		"givenName"
-#define NID_givenName		99
-#define OBJ_givenName		OBJ_X509,42L
-
-#define LN_initials		"initials"
-#define NID_initials		101
-#define OBJ_initials		OBJ_X509,43L
-
-#define LN_generationQualifier		"generationQualifier"
-#define NID_generationQualifier		509
-#define OBJ_generationQualifier		OBJ_X509,44L
-
-#define LN_x500UniqueIdentifier		"x500UniqueIdentifier"
-#define NID_x500UniqueIdentifier		503
-#define OBJ_x500UniqueIdentifier		OBJ_X509,45L
-
-#define SN_dnQualifier		"dnQualifier"
-#define LN_dnQualifier		"dnQualifier"
-#define NID_dnQualifier		174
-#define OBJ_dnQualifier		OBJ_X509,46L
-
-#define LN_pseudonym		"pseudonym"
-#define NID_pseudonym		510
-#define OBJ_pseudonym		OBJ_X509,65L
-
-#define SN_role		"role"
-#define LN_role		"role"
-#define NID_role		400
-#define OBJ_role		OBJ_X509,72L
-
-#define SN_X500algorithms		"X500algorithms"
-#define LN_X500algorithms		"directory services - algorithms"
-#define NID_X500algorithms		378
-#define OBJ_X500algorithms		OBJ_X500,8L
-
-#define SN_rsa		"RSA"
-#define LN_rsa		"rsa"
-#define NID_rsa		19
-#define OBJ_rsa		OBJ_X500algorithms,1L,1L
-
-#define SN_mdc2WithRSA		"RSA-MDC2"
-#define LN_mdc2WithRSA		"mdc2WithRSA"
-#define NID_mdc2WithRSA		96
-#define OBJ_mdc2WithRSA		OBJ_X500algorithms,3L,100L
-
-#define SN_mdc2		"MDC2"
-#define LN_mdc2		"mdc2"
-#define NID_mdc2		95
-#define OBJ_mdc2		OBJ_X500algorithms,3L,101L
-
-#define SN_id_ce		"id-ce"
-#define NID_id_ce		81
-#define OBJ_id_ce		OBJ_X500,29L
-
-#define SN_subject_directory_attributes		"subjectDirectoryAttributes"
-#define LN_subject_directory_attributes		"X509v3 Subject Directory Attributes"
-#define NID_subject_directory_attributes		769
-#define OBJ_subject_directory_attributes		OBJ_id_ce,9L
-
-#define SN_subject_key_identifier		"subjectKeyIdentifier"
-#define LN_subject_key_identifier		"X509v3 Subject Key Identifier"
-#define NID_subject_key_identifier		82
-#define OBJ_subject_key_identifier		OBJ_id_ce,14L
-
-#define SN_key_usage		"keyUsage"
-#define LN_key_usage		"X509v3 Key Usage"
-#define NID_key_usage		83
-#define OBJ_key_usage		OBJ_id_ce,15L
-
-#define SN_private_key_usage_period		"privateKeyUsagePeriod"
-#define LN_private_key_usage_period		"X509v3 Private Key Usage Period"
-#define NID_private_key_usage_period		84
-#define OBJ_private_key_usage_period		OBJ_id_ce,16L
-
-#define SN_subject_alt_name		"subjectAltName"
-#define LN_subject_alt_name		"X509v3 Subject Alternative Name"
-#define NID_subject_alt_name		85
-#define OBJ_subject_alt_name		OBJ_id_ce,17L
-
-#define SN_issuer_alt_name		"issuerAltName"
-#define LN_issuer_alt_name		"X509v3 Issuer Alternative Name"
-#define NID_issuer_alt_name		86
-#define OBJ_issuer_alt_name		OBJ_id_ce,18L
-
-#define SN_basic_constraints		"basicConstraints"
-#define LN_basic_constraints		"X509v3 Basic Constraints"
-#define NID_basic_constraints		87
-#define OBJ_basic_constraints		OBJ_id_ce,19L
-
-#define SN_crl_number		"crlNumber"
-#define LN_crl_number		"X509v3 CRL Number"
-#define NID_crl_number		88
-#define OBJ_crl_number		OBJ_id_ce,20L
-
-#define SN_crl_reason		"CRLReason"
-#define LN_crl_reason		"X509v3 CRL Reason Code"
-#define NID_crl_reason		141
-#define OBJ_crl_reason		OBJ_id_ce,21L
-
-#define SN_invalidity_date		"invalidityDate"
-#define LN_invalidity_date		"Invalidity Date"
-#define NID_invalidity_date		142
-#define OBJ_invalidity_date		OBJ_id_ce,24L
-
-#define SN_delta_crl		"deltaCRL"
-#define LN_delta_crl		"X509v3 Delta CRL Indicator"
-#define NID_delta_crl		140
-#define OBJ_delta_crl		OBJ_id_ce,27L
-
-#define SN_issuing_distribution_point		"issuingDistributionPoint"
-#define LN_issuing_distribution_point		"X509v3 Issuing Distrubution Point"
-#define NID_issuing_distribution_point		770
-#define OBJ_issuing_distribution_point		OBJ_id_ce,28L
-
-#define SN_certificate_issuer		"certificateIssuer"
-#define LN_certificate_issuer		"X509v3 Certificate Issuer"
-#define NID_certificate_issuer		771
-#define OBJ_certificate_issuer		OBJ_id_ce,29L
-
-#define SN_name_constraints		"nameConstraints"
-#define LN_name_constraints		"X509v3 Name Constraints"
-#define NID_name_constraints		666
-#define OBJ_name_constraints		OBJ_id_ce,30L
-
-#define SN_crl_distribution_points		"crlDistributionPoints"
-#define LN_crl_distribution_points		"X509v3 CRL Distribution Points"
-#define NID_crl_distribution_points		103
-#define OBJ_crl_distribution_points		OBJ_id_ce,31L
-
-#define SN_certificate_policies		"certificatePolicies"
-#define LN_certificate_policies		"X509v3 Certificate Policies"
-#define NID_certificate_policies		89
-#define OBJ_certificate_policies		OBJ_id_ce,32L
-
-#define SN_any_policy		"anyPolicy"
-#define LN_any_policy		"X509v3 Any Policy"
-#define NID_any_policy		746
-#define OBJ_any_policy		OBJ_certificate_policies,0L
-
-#define SN_policy_mappings		"policyMappings"
-#define LN_policy_mappings		"X509v3 Policy Mappings"
-#define NID_policy_mappings		747
-#define OBJ_policy_mappings		OBJ_id_ce,33L
-
-#define SN_authority_key_identifier		"authorityKeyIdentifier"
-#define LN_authority_key_identifier		"X509v3 Authority Key Identifier"
-#define NID_authority_key_identifier		90
-#define OBJ_authority_key_identifier		OBJ_id_ce,35L
-
-#define SN_policy_constraints		"policyConstraints"
-#define LN_policy_constraints		"X509v3 Policy Constraints"
-#define NID_policy_constraints		401
-#define OBJ_policy_constraints		OBJ_id_ce,36L
-
-#define SN_ext_key_usage		"extendedKeyUsage"
-#define LN_ext_key_usage		"X509v3 Extended Key Usage"
-#define NID_ext_key_usage		126
-#define OBJ_ext_key_usage		OBJ_id_ce,37L
-
-#define SN_inhibit_any_policy		"inhibitAnyPolicy"
-#define LN_inhibit_any_policy		"X509v3 Inhibit Any Policy"
-#define NID_inhibit_any_policy		748
-#define OBJ_inhibit_any_policy		OBJ_id_ce,54L
-
-#define SN_target_information		"targetInformation"
-#define LN_target_information		"X509v3 AC Targeting"
-#define NID_target_information		402
-#define OBJ_target_information		OBJ_id_ce,55L
-
-#define SN_no_rev_avail		"noRevAvail"
-#define LN_no_rev_avail		"X509v3 No Revocation Available"
-#define NID_no_rev_avail		403
-#define OBJ_no_rev_avail		OBJ_id_ce,56L
-
-#define SN_netscape		"Netscape"
-#define LN_netscape		"Netscape Communications Corp."
-#define NID_netscape		57
-#define OBJ_netscape		2L,16L,840L,1L,113730L
-
-#define SN_netscape_cert_extension		"nsCertExt"
-#define LN_netscape_cert_extension		"Netscape Certificate Extension"
-#define NID_netscape_cert_extension		58
-#define OBJ_netscape_cert_extension		OBJ_netscape,1L
-
-#define SN_netscape_data_type		"nsDataType"
-#define LN_netscape_data_type		"Netscape Data Type"
-#define NID_netscape_data_type		59
-#define OBJ_netscape_data_type		OBJ_netscape,2L
-
-#define SN_netscape_cert_type		"nsCertType"
-#define LN_netscape_cert_type		"Netscape Cert Type"
-#define NID_netscape_cert_type		71
-#define OBJ_netscape_cert_type		OBJ_netscape_cert_extension,1L
-
-#define SN_netscape_base_url		"nsBaseUrl"
-#define LN_netscape_base_url		"Netscape Base Url"
-#define NID_netscape_base_url		72
-#define OBJ_netscape_base_url		OBJ_netscape_cert_extension,2L
-
-#define SN_netscape_revocation_url		"nsRevocationUrl"
-#define LN_netscape_revocation_url		"Netscape Revocation Url"
-#define NID_netscape_revocation_url		73
-#define OBJ_netscape_revocation_url		OBJ_netscape_cert_extension,3L
-
-#define SN_netscape_ca_revocation_url		"nsCaRevocationUrl"
-#define LN_netscape_ca_revocation_url		"Netscape CA Revocation Url"
-#define NID_netscape_ca_revocation_url		74
-#define OBJ_netscape_ca_revocation_url		OBJ_netscape_cert_extension,4L
-
-#define SN_netscape_renewal_url		"nsRenewalUrl"
-#define LN_netscape_renewal_url		"Netscape Renewal Url"
-#define NID_netscape_renewal_url		75
-#define OBJ_netscape_renewal_url		OBJ_netscape_cert_extension,7L
-
-#define SN_netscape_ca_policy_url		"nsCaPolicyUrl"
-#define LN_netscape_ca_policy_url		"Netscape CA Policy Url"
-#define NID_netscape_ca_policy_url		76
-#define OBJ_netscape_ca_policy_url		OBJ_netscape_cert_extension,8L
-
-#define SN_netscape_ssl_server_name		"nsSslServerName"
-#define LN_netscape_ssl_server_name		"Netscape SSL Server Name"
-#define NID_netscape_ssl_server_name		77
-#define OBJ_netscape_ssl_server_name		OBJ_netscape_cert_extension,12L
-
-#define SN_netscape_comment		"nsComment"
-#define LN_netscape_comment		"Netscape Comment"
-#define NID_netscape_comment		78
-#define OBJ_netscape_comment		OBJ_netscape_cert_extension,13L
-
-#define SN_netscape_cert_sequence		"nsCertSequence"
-#define LN_netscape_cert_sequence		"Netscape Certificate Sequence"
-#define NID_netscape_cert_sequence		79
-#define OBJ_netscape_cert_sequence		OBJ_netscape_data_type,5L
-
-#define SN_ns_sgc		"nsSGC"
-#define LN_ns_sgc		"Netscape Server Gated Crypto"
-#define NID_ns_sgc		139
-#define OBJ_ns_sgc		OBJ_netscape,4L,1L
-
-#define SN_org		"ORG"
-#define LN_org		"org"
-#define NID_org		379
-#define OBJ_org		OBJ_iso,3L
-
-#define SN_dod		"DOD"
-#define LN_dod		"dod"
-#define NID_dod		380
-#define OBJ_dod		OBJ_org,6L
-
-#define SN_iana		"IANA"
-#define LN_iana		"iana"
-#define NID_iana		381
-#define OBJ_iana		OBJ_dod,1L
-
-#define OBJ_internet		OBJ_iana
-
-#define SN_Directory		"directory"
-#define LN_Directory		"Directory"
-#define NID_Directory		382
-#define OBJ_Directory		OBJ_internet,1L
-
-#define SN_Management		"mgmt"
-#define LN_Management		"Management"
-#define NID_Management		383
-#define OBJ_Management		OBJ_internet,2L
-
-#define SN_Experimental		"experimental"
-#define LN_Experimental		"Experimental"
-#define NID_Experimental		384
-#define OBJ_Experimental		OBJ_internet,3L
-
-#define SN_Private		"private"
-#define LN_Private		"Private"
-#define NID_Private		385
-#define OBJ_Private		OBJ_internet,4L
-
-#define SN_Security		"security"
-#define LN_Security		"Security"
-#define NID_Security		386
-#define OBJ_Security		OBJ_internet,5L
-
-#define SN_SNMPv2		"snmpv2"
-#define LN_SNMPv2		"SNMPv2"
-#define NID_SNMPv2		387
-#define OBJ_SNMPv2		OBJ_internet,6L
-
-#define LN_Mail		"Mail"
-#define NID_Mail		388
-#define OBJ_Mail		OBJ_internet,7L
-
-#define SN_Enterprises		"enterprises"
-#define LN_Enterprises		"Enterprises"
-#define NID_Enterprises		389
-#define OBJ_Enterprises		OBJ_Private,1L
-
-#define SN_dcObject		"dcobject"
-#define LN_dcObject		"dcObject"
-#define NID_dcObject		390
-#define OBJ_dcObject		OBJ_Enterprises,1466L,344L
-
-#define SN_mime_mhs		"mime-mhs"
-#define LN_mime_mhs		"MIME MHS"
-#define NID_mime_mhs		504
-#define OBJ_mime_mhs		OBJ_Mail,1L
-
-#define SN_mime_mhs_headings		"mime-mhs-headings"
-#define LN_mime_mhs_headings		"mime-mhs-headings"
-#define NID_mime_mhs_headings		505
-#define OBJ_mime_mhs_headings		OBJ_mime_mhs,1L
-
-#define SN_mime_mhs_bodies		"mime-mhs-bodies"
-#define LN_mime_mhs_bodies		"mime-mhs-bodies"
-#define NID_mime_mhs_bodies		506
-#define OBJ_mime_mhs_bodies		OBJ_mime_mhs,2L
-
-#define SN_id_hex_partial_message		"id-hex-partial-message"
-#define LN_id_hex_partial_message		"id-hex-partial-message"
-#define NID_id_hex_partial_message		507
-#define OBJ_id_hex_partial_message		OBJ_mime_mhs_headings,1L
-
-#define SN_id_hex_multipart_message		"id-hex-multipart-message"
-#define LN_id_hex_multipart_message		"id-hex-multipart-message"
-#define NID_id_hex_multipart_message		508
-#define OBJ_id_hex_multipart_message		OBJ_mime_mhs_headings,2L
-
-#define SN_rle_compression		"RLE"
-#define LN_rle_compression		"run length compression"
-#define NID_rle_compression		124
-#define OBJ_rle_compression		1L,1L,1L,1L,666L,1L
-
-#define SN_zlib_compression		"ZLIB"
-#define LN_zlib_compression		"zlib compression"
-#define NID_zlib_compression		125
-#define OBJ_zlib_compression		1L,1L,1L,1L,666L,2L
-
-#define OBJ_csor		2L,16L,840L,1L,101L,3L
-
-#define OBJ_nistAlgorithms		OBJ_csor,4L
-
-#define OBJ_aes		OBJ_nistAlgorithms,1L
-
-#define SN_aes_128_ecb		"AES-128-ECB"
-#define LN_aes_128_ecb		"aes-128-ecb"
-#define NID_aes_128_ecb		418
-#define OBJ_aes_128_ecb		OBJ_aes,1L
-
-#define SN_aes_128_cbc		"AES-128-CBC"
-#define LN_aes_128_cbc		"aes-128-cbc"
-#define NID_aes_128_cbc		419
-#define OBJ_aes_128_cbc		OBJ_aes,2L
-
-#define SN_aes_128_ofb128		"AES-128-OFB"
-#define LN_aes_128_ofb128		"aes-128-ofb"
-#define NID_aes_128_ofb128		420
-#define OBJ_aes_128_ofb128		OBJ_aes,3L
-
-#define SN_aes_128_cfb128		"AES-128-CFB"
-#define LN_aes_128_cfb128		"aes-128-cfb"
-#define NID_aes_128_cfb128		421
-#define OBJ_aes_128_cfb128		OBJ_aes,4L
-
-#define SN_aes_192_ecb		"AES-192-ECB"
-#define LN_aes_192_ecb		"aes-192-ecb"
-#define NID_aes_192_ecb		422
-#define OBJ_aes_192_ecb		OBJ_aes,21L
-
-#define SN_aes_192_cbc		"AES-192-CBC"
-#define LN_aes_192_cbc		"aes-192-cbc"
-#define NID_aes_192_cbc		423
-#define OBJ_aes_192_cbc		OBJ_aes,22L
-
-#define SN_aes_192_ofb128		"AES-192-OFB"
-#define LN_aes_192_ofb128		"aes-192-ofb"
-#define NID_aes_192_ofb128		424
-#define OBJ_aes_192_ofb128		OBJ_aes,23L
-
-#define SN_aes_192_cfb128		"AES-192-CFB"
-#define LN_aes_192_cfb128		"aes-192-cfb"
-#define NID_aes_192_cfb128		425
-#define OBJ_aes_192_cfb128		OBJ_aes,24L
-
-#define SN_aes_256_ecb		"AES-256-ECB"
-#define LN_aes_256_ecb		"aes-256-ecb"
-#define NID_aes_256_ecb		426
-#define OBJ_aes_256_ecb		OBJ_aes,41L
-
-#define SN_aes_256_cbc		"AES-256-CBC"
-#define LN_aes_256_cbc		"aes-256-cbc"
-#define NID_aes_256_cbc		427
-#define OBJ_aes_256_cbc		OBJ_aes,42L
-
-#define SN_aes_256_ofb128		"AES-256-OFB"
-#define LN_aes_256_ofb128		"aes-256-ofb"
-#define NID_aes_256_ofb128		428
-#define OBJ_aes_256_ofb128		OBJ_aes,43L
-
-#define SN_aes_256_cfb128		"AES-256-CFB"
-#define LN_aes_256_cfb128		"aes-256-cfb"
-#define NID_aes_256_cfb128		429
-#define OBJ_aes_256_cfb128		OBJ_aes,44L
-
-#define SN_aes_128_cfb1		"AES-128-CFB1"
-#define LN_aes_128_cfb1		"aes-128-cfb1"
-#define NID_aes_128_cfb1		650
-
-#define SN_aes_192_cfb1		"AES-192-CFB1"
-#define LN_aes_192_cfb1		"aes-192-cfb1"
-#define NID_aes_192_cfb1		651
-
-#define SN_aes_256_cfb1		"AES-256-CFB1"
-#define LN_aes_256_cfb1		"aes-256-cfb1"
-#define NID_aes_256_cfb1		652
-
-#define SN_aes_128_cfb8		"AES-128-CFB8"
-#define LN_aes_128_cfb8		"aes-128-cfb8"
-#define NID_aes_128_cfb8		653
-
-#define SN_aes_192_cfb8		"AES-192-CFB8"
-#define LN_aes_192_cfb8		"aes-192-cfb8"
-#define NID_aes_192_cfb8		654
-
-#define SN_aes_256_cfb8		"AES-256-CFB8"
-#define LN_aes_256_cfb8		"aes-256-cfb8"
-#define NID_aes_256_cfb8		655
-
-#define SN_des_cfb1		"DES-CFB1"
-#define LN_des_cfb1		"des-cfb1"
-#define NID_des_cfb1		656
-
-#define SN_des_cfb8		"DES-CFB8"
-#define LN_des_cfb8		"des-cfb8"
-#define NID_des_cfb8		657
-
-#define SN_des_ede3_cfb1		"DES-EDE3-CFB1"
-#define LN_des_ede3_cfb1		"des-ede3-cfb1"
-#define NID_des_ede3_cfb1		658
-
-#define SN_des_ede3_cfb8		"DES-EDE3-CFB8"
-#define LN_des_ede3_cfb8		"des-ede3-cfb8"
-#define NID_des_ede3_cfb8		659
-
-#define OBJ_nist_hashalgs		OBJ_nistAlgorithms,2L
-
-#define SN_sha256		"SHA256"
-#define LN_sha256		"sha256"
-#define NID_sha256		672
-#define OBJ_sha256		OBJ_nist_hashalgs,1L
-
-#define SN_sha384		"SHA384"
-#define LN_sha384		"sha384"
-#define NID_sha384		673
-#define OBJ_sha384		OBJ_nist_hashalgs,2L
-
-#define SN_sha512		"SHA512"
-#define LN_sha512		"sha512"
-#define NID_sha512		674
-#define OBJ_sha512		OBJ_nist_hashalgs,3L
-
-#define SN_sha224		"SHA224"
-#define LN_sha224		"sha224"
-#define NID_sha224		675
-#define OBJ_sha224		OBJ_nist_hashalgs,4L
-
-#define SN_hold_instruction_code		"holdInstructionCode"
-#define LN_hold_instruction_code		"Hold Instruction Code"
-#define NID_hold_instruction_code		430
-#define OBJ_hold_instruction_code		OBJ_id_ce,23L
-
-#define OBJ_holdInstruction		OBJ_X9_57,2L
-
-#define SN_hold_instruction_none		"holdInstructionNone"
-#define LN_hold_instruction_none		"Hold Instruction None"
-#define NID_hold_instruction_none		431
-#define OBJ_hold_instruction_none		OBJ_holdInstruction,1L
-
-#define SN_hold_instruction_call_issuer		"holdInstructionCallIssuer"
-#define LN_hold_instruction_call_issuer		"Hold Instruction Call Issuer"
-#define NID_hold_instruction_call_issuer		432
-#define OBJ_hold_instruction_call_issuer		OBJ_holdInstruction,2L
-
-#define SN_hold_instruction_reject		"holdInstructionReject"
-#define LN_hold_instruction_reject		"Hold Instruction Reject"
-#define NID_hold_instruction_reject		433
-#define OBJ_hold_instruction_reject		OBJ_holdInstruction,3L
-
-#define SN_data		"data"
-#define NID_data		434
-#define OBJ_data		OBJ_itu_t,9L
-
-#define SN_pss		"pss"
-#define NID_pss		435
-#define OBJ_pss		OBJ_data,2342L
-
-#define SN_ucl		"ucl"
-#define NID_ucl		436
-#define OBJ_ucl		OBJ_pss,19200300L
-
-#define SN_pilot		"pilot"
-#define NID_pilot		437
-#define OBJ_pilot		OBJ_ucl,100L
-
-#define LN_pilotAttributeType		"pilotAttributeType"
-#define NID_pilotAttributeType		438
-#define OBJ_pilotAttributeType		OBJ_pilot,1L
-
-#define LN_pilotAttributeSyntax		"pilotAttributeSyntax"
-#define NID_pilotAttributeSyntax		439
-#define OBJ_pilotAttributeSyntax		OBJ_pilot,3L
-
-#define LN_pilotObjectClass		"pilotObjectClass"
-#define NID_pilotObjectClass		440
-#define OBJ_pilotObjectClass		OBJ_pilot,4L
-
-#define LN_pilotGroups		"pilotGroups"
-#define NID_pilotGroups		441
-#define OBJ_pilotGroups		OBJ_pilot,10L
-
-#define LN_iA5StringSyntax		"iA5StringSyntax"
-#define NID_iA5StringSyntax		442
-#define OBJ_iA5StringSyntax		OBJ_pilotAttributeSyntax,4L
-
-#define LN_caseIgnoreIA5StringSyntax		"caseIgnoreIA5StringSyntax"
-#define NID_caseIgnoreIA5StringSyntax		443
-#define OBJ_caseIgnoreIA5StringSyntax		OBJ_pilotAttributeSyntax,5L
-
-#define LN_pilotObject		"pilotObject"
-#define NID_pilotObject		444
-#define OBJ_pilotObject		OBJ_pilotObjectClass,3L
-
-#define LN_pilotPerson		"pilotPerson"
-#define NID_pilotPerson		445
-#define OBJ_pilotPerson		OBJ_pilotObjectClass,4L
-
-#define SN_account		"account"
-#define NID_account		446
-#define OBJ_account		OBJ_pilotObjectClass,5L
-
-#define SN_document		"document"
-#define NID_document		447
-#define OBJ_document		OBJ_pilotObjectClass,6L
-
-#define SN_room		"room"
-#define NID_room		448
-#define OBJ_room		OBJ_pilotObjectClass,7L
-
-#define LN_documentSeries		"documentSeries"
-#define NID_documentSeries		449
-#define OBJ_documentSeries		OBJ_pilotObjectClass,9L
-
-#define SN_Domain		"domain"
-#define LN_Domain		"Domain"
-#define NID_Domain		392
-#define OBJ_Domain		OBJ_pilotObjectClass,13L
-
-#define LN_rFC822localPart		"rFC822localPart"
-#define NID_rFC822localPart		450
-#define OBJ_rFC822localPart		OBJ_pilotObjectClass,14L
-
-#define LN_dNSDomain		"dNSDomain"
-#define NID_dNSDomain		451
-#define OBJ_dNSDomain		OBJ_pilotObjectClass,15L
-
-#define LN_domainRelatedObject		"domainRelatedObject"
-#define NID_domainRelatedObject		452
-#define OBJ_domainRelatedObject		OBJ_pilotObjectClass,17L
-
-#define LN_friendlyCountry		"friendlyCountry"
-#define NID_friendlyCountry		453
-#define OBJ_friendlyCountry		OBJ_pilotObjectClass,18L
-
-#define LN_simpleSecurityObject		"simpleSecurityObject"
-#define NID_simpleSecurityObject		454
-#define OBJ_simpleSecurityObject		OBJ_pilotObjectClass,19L
-
-#define LN_pilotOrganization		"pilotOrganization"
-#define NID_pilotOrganization		455
-#define OBJ_pilotOrganization		OBJ_pilotObjectClass,20L
-
-#define LN_pilotDSA		"pilotDSA"
-#define NID_pilotDSA		456
-#define OBJ_pilotDSA		OBJ_pilotObjectClass,21L
-
-#define LN_qualityLabelledData		"qualityLabelledData"
-#define NID_qualityLabelledData		457
-#define OBJ_qualityLabelledData		OBJ_pilotObjectClass,22L
-
-#define SN_userId		"UID"
-#define LN_userId		"userId"
-#define NID_userId		458
-#define OBJ_userId		OBJ_pilotAttributeType,1L
-
-#define LN_textEncodedORAddress		"textEncodedORAddress"
-#define NID_textEncodedORAddress		459
-#define OBJ_textEncodedORAddress		OBJ_pilotAttributeType,2L
-
-#define SN_rfc822Mailbox		"mail"
-#define LN_rfc822Mailbox		"rfc822Mailbox"
-#define NID_rfc822Mailbox		460
-#define OBJ_rfc822Mailbox		OBJ_pilotAttributeType,3L
-
-#define SN_info		"info"
-#define NID_info		461
-#define OBJ_info		OBJ_pilotAttributeType,4L
-
-#define LN_favouriteDrink		"favouriteDrink"
-#define NID_favouriteDrink		462
-#define OBJ_favouriteDrink		OBJ_pilotAttributeType,5L
-
-#define LN_roomNumber		"roomNumber"
-#define NID_roomNumber		463
-#define OBJ_roomNumber		OBJ_pilotAttributeType,6L
-
-#define SN_photo		"photo"
-#define NID_photo		464
-#define OBJ_photo		OBJ_pilotAttributeType,7L
-
-#define LN_userClass		"userClass"
-#define NID_userClass		465
-#define OBJ_userClass		OBJ_pilotAttributeType,8L
-
-#define SN_host		"host"
-#define NID_host		466
-#define OBJ_host		OBJ_pilotAttributeType,9L
-
-#define SN_manager		"manager"
-#define NID_manager		467
-#define OBJ_manager		OBJ_pilotAttributeType,10L
-
-#define LN_documentIdentifier		"documentIdentifier"
-#define NID_documentIdentifier		468
-#define OBJ_documentIdentifier		OBJ_pilotAttributeType,11L
-
-#define LN_documentTitle		"documentTitle"
-#define NID_documentTitle		469
-#define OBJ_documentTitle		OBJ_pilotAttributeType,12L
-
-#define LN_documentVersion		"documentVersion"
-#define NID_documentVersion		470
-#define OBJ_documentVersion		OBJ_pilotAttributeType,13L
-
-#define LN_documentAuthor		"documentAuthor"
-#define NID_documentAuthor		471
-#define OBJ_documentAuthor		OBJ_pilotAttributeType,14L
-
-#define LN_documentLocation		"documentLocation"
-#define NID_documentLocation		472
-#define OBJ_documentLocation		OBJ_pilotAttributeType,15L
-
-#define LN_homeTelephoneNumber		"homeTelephoneNumber"
-#define NID_homeTelephoneNumber		473
-#define OBJ_homeTelephoneNumber		OBJ_pilotAttributeType,20L
-
-#define SN_secretary		"secretary"
-#define NID_secretary		474
-#define OBJ_secretary		OBJ_pilotAttributeType,21L
-
-#define LN_otherMailbox		"otherMailbox"
-#define NID_otherMailbox		475
-#define OBJ_otherMailbox		OBJ_pilotAttributeType,22L
-
-#define LN_lastModifiedTime		"lastModifiedTime"
-#define NID_lastModifiedTime		476
-#define OBJ_lastModifiedTime		OBJ_pilotAttributeType,23L
-
-#define LN_lastModifiedBy		"lastModifiedBy"
-#define NID_lastModifiedBy		477
-#define OBJ_lastModifiedBy		OBJ_pilotAttributeType,24L
-
-#define SN_domainComponent		"DC"
-#define LN_domainComponent		"domainComponent"
-#define NID_domainComponent		391
-#define OBJ_domainComponent		OBJ_pilotAttributeType,25L
-
-#define LN_aRecord		"aRecord"
-#define NID_aRecord		478
-#define OBJ_aRecord		OBJ_pilotAttributeType,26L
-
-#define LN_pilotAttributeType27		"pilotAttributeType27"
-#define NID_pilotAttributeType27		479
-#define OBJ_pilotAttributeType27		OBJ_pilotAttributeType,27L
-
-#define LN_mXRecord		"mXRecord"
-#define NID_mXRecord		480
-#define OBJ_mXRecord		OBJ_pilotAttributeType,28L
-
-#define LN_nSRecord		"nSRecord"
-#define NID_nSRecord		481
-#define OBJ_nSRecord		OBJ_pilotAttributeType,29L
-
-#define LN_sOARecord		"sOARecord"
-#define NID_sOARecord		482
-#define OBJ_sOARecord		OBJ_pilotAttributeType,30L
-
-#define LN_cNAMERecord		"cNAMERecord"
-#define NID_cNAMERecord		483
-#define OBJ_cNAMERecord		OBJ_pilotAttributeType,31L
-
-#define LN_associatedDomain		"associatedDomain"
-#define NID_associatedDomain		484
-#define OBJ_associatedDomain		OBJ_pilotAttributeType,37L
-
-#define LN_associatedName		"associatedName"
-#define NID_associatedName		485
-#define OBJ_associatedName		OBJ_pilotAttributeType,38L
-
-#define LN_homePostalAddress		"homePostalAddress"
-#define NID_homePostalAddress		486
-#define OBJ_homePostalAddress		OBJ_pilotAttributeType,39L
-
-#define LN_personalTitle		"personalTitle"
-#define NID_personalTitle		487
-#define OBJ_personalTitle		OBJ_pilotAttributeType,40L
-
-#define LN_mobileTelephoneNumber		"mobileTelephoneNumber"
-#define NID_mobileTelephoneNumber		488
-#define OBJ_mobileTelephoneNumber		OBJ_pilotAttributeType,41L
-
-#define LN_pagerTelephoneNumber		"pagerTelephoneNumber"
-#define NID_pagerTelephoneNumber		489
-#define OBJ_pagerTelephoneNumber		OBJ_pilotAttributeType,42L
-
-#define LN_friendlyCountryName		"friendlyCountryName"
-#define NID_friendlyCountryName		490
-#define OBJ_friendlyCountryName		OBJ_pilotAttributeType,43L
-
-#define LN_organizationalStatus		"organizationalStatus"
-#define NID_organizationalStatus		491
-#define OBJ_organizationalStatus		OBJ_pilotAttributeType,45L
-
-#define LN_janetMailbox		"janetMailbox"
-#define NID_janetMailbox		492
-#define OBJ_janetMailbox		OBJ_pilotAttributeType,46L
-
-#define LN_mailPreferenceOption		"mailPreferenceOption"
-#define NID_mailPreferenceOption		493
-#define OBJ_mailPreferenceOption		OBJ_pilotAttributeType,47L
-
-#define LN_buildingName		"buildingName"
-#define NID_buildingName		494
-#define OBJ_buildingName		OBJ_pilotAttributeType,48L
-
-#define LN_dSAQuality		"dSAQuality"
-#define NID_dSAQuality		495
-#define OBJ_dSAQuality		OBJ_pilotAttributeType,49L
-
-#define LN_singleLevelQuality		"singleLevelQuality"
-#define NID_singleLevelQuality		496
-#define OBJ_singleLevelQuality		OBJ_pilotAttributeType,50L
-
-#define LN_subtreeMinimumQuality		"subtreeMinimumQuality"
-#define NID_subtreeMinimumQuality		497
-#define OBJ_subtreeMinimumQuality		OBJ_pilotAttributeType,51L
-
-#define LN_subtreeMaximumQuality		"subtreeMaximumQuality"
-#define NID_subtreeMaximumQuality		498
-#define OBJ_subtreeMaximumQuality		OBJ_pilotAttributeType,52L
-
-#define LN_personalSignature		"personalSignature"
-#define NID_personalSignature		499
-#define OBJ_personalSignature		OBJ_pilotAttributeType,53L
-
-#define LN_dITRedirect		"dITRedirect"
-#define NID_dITRedirect		500
-#define OBJ_dITRedirect		OBJ_pilotAttributeType,54L
-
-#define SN_audio		"audio"
-#define NID_audio		501
-#define OBJ_audio		OBJ_pilotAttributeType,55L
-
-#define LN_documentPublisher		"documentPublisher"
-#define NID_documentPublisher		502
-#define OBJ_documentPublisher		OBJ_pilotAttributeType,56L
-
-#define SN_id_set		"id-set"
-#define LN_id_set		"Secure Electronic Transactions"
-#define NID_id_set		512
-#define OBJ_id_set		OBJ_international_organizations,42L
-
-#define SN_set_ctype		"set-ctype"
-#define LN_set_ctype		"content types"
-#define NID_set_ctype		513
-#define OBJ_set_ctype		OBJ_id_set,0L
-
-#define SN_set_msgExt		"set-msgExt"
-#define LN_set_msgExt		"message extensions"
-#define NID_set_msgExt		514
-#define OBJ_set_msgExt		OBJ_id_set,1L
-
-#define SN_set_attr		"set-attr"
-#define NID_set_attr		515
-#define OBJ_set_attr		OBJ_id_set,3L
-
-#define SN_set_policy		"set-policy"
-#define NID_set_policy		516
-#define OBJ_set_policy		OBJ_id_set,5L
-
-#define SN_set_certExt		"set-certExt"
-#define LN_set_certExt		"certificate extensions"
-#define NID_set_certExt		517
-#define OBJ_set_certExt		OBJ_id_set,7L
-
-#define SN_set_brand		"set-brand"
-#define NID_set_brand		518
-#define OBJ_set_brand		OBJ_id_set,8L
-
-#define SN_setct_PANData		"setct-PANData"
-#define NID_setct_PANData		519
-#define OBJ_setct_PANData		OBJ_set_ctype,0L
-
-#define SN_setct_PANToken		"setct-PANToken"
-#define NID_setct_PANToken		520
-#define OBJ_setct_PANToken		OBJ_set_ctype,1L
-
-#define SN_setct_PANOnly		"setct-PANOnly"
-#define NID_setct_PANOnly		521
-#define OBJ_setct_PANOnly		OBJ_set_ctype,2L
-
-#define SN_setct_OIData		"setct-OIData"
-#define NID_setct_OIData		522
-#define OBJ_setct_OIData		OBJ_set_ctype,3L
-
-#define SN_setct_PI		"setct-PI"
-#define NID_setct_PI		523
-#define OBJ_setct_PI		OBJ_set_ctype,4L
-
-#define SN_setct_PIData		"setct-PIData"
-#define NID_setct_PIData		524
-#define OBJ_setct_PIData		OBJ_set_ctype,5L
-
-#define SN_setct_PIDataUnsigned		"setct-PIDataUnsigned"
-#define NID_setct_PIDataUnsigned		525
-#define OBJ_setct_PIDataUnsigned		OBJ_set_ctype,6L
-
-#define SN_setct_HODInput		"setct-HODInput"
-#define NID_setct_HODInput		526
-#define OBJ_setct_HODInput		OBJ_set_ctype,7L
-
-#define SN_setct_AuthResBaggage		"setct-AuthResBaggage"
-#define NID_setct_AuthResBaggage		527
-#define OBJ_setct_AuthResBaggage		OBJ_set_ctype,8L
-
-#define SN_setct_AuthRevReqBaggage		"setct-AuthRevReqBaggage"
-#define NID_setct_AuthRevReqBaggage		528
-#define OBJ_setct_AuthRevReqBaggage		OBJ_set_ctype,9L
-
-#define SN_setct_AuthRevResBaggage		"setct-AuthRevResBaggage"
-#define NID_setct_AuthRevResBaggage		529
-#define OBJ_setct_AuthRevResBaggage		OBJ_set_ctype,10L
-
-#define SN_setct_CapTokenSeq		"setct-CapTokenSeq"
-#define NID_setct_CapTokenSeq		530
-#define OBJ_setct_CapTokenSeq		OBJ_set_ctype,11L
-
-#define SN_setct_PInitResData		"setct-PInitResData"
-#define NID_setct_PInitResData		531
-#define OBJ_setct_PInitResData		OBJ_set_ctype,12L
-
-#define SN_setct_PI_TBS		"setct-PI-TBS"
-#define NID_setct_PI_TBS		532
-#define OBJ_setct_PI_TBS		OBJ_set_ctype,13L
-
-#define SN_setct_PResData		"setct-PResData"
-#define NID_setct_PResData		533
-#define OBJ_setct_PResData		OBJ_set_ctype,14L
-
-#define SN_setct_AuthReqTBS		"setct-AuthReqTBS"
-#define NID_setct_AuthReqTBS		534
-#define OBJ_setct_AuthReqTBS		OBJ_set_ctype,16L
-
-#define SN_setct_AuthResTBS		"setct-AuthResTBS"
-#define NID_setct_AuthResTBS		535
-#define OBJ_setct_AuthResTBS		OBJ_set_ctype,17L
-
-#define SN_setct_AuthResTBSX		"setct-AuthResTBSX"
-#define NID_setct_AuthResTBSX		536
-#define OBJ_setct_AuthResTBSX		OBJ_set_ctype,18L
-
-#define SN_setct_AuthTokenTBS		"setct-AuthTokenTBS"
-#define NID_setct_AuthTokenTBS		537
-#define OBJ_setct_AuthTokenTBS		OBJ_set_ctype,19L
-
-#define SN_setct_CapTokenData		"setct-CapTokenData"
-#define NID_setct_CapTokenData		538
-#define OBJ_setct_CapTokenData		OBJ_set_ctype,20L
-
-#define SN_setct_CapTokenTBS		"setct-CapTokenTBS"
-#define NID_setct_CapTokenTBS		539
-#define OBJ_setct_CapTokenTBS		OBJ_set_ctype,21L
-
-#define SN_setct_AcqCardCodeMsg		"setct-AcqCardCodeMsg"
-#define NID_setct_AcqCardCodeMsg		540
-#define OBJ_setct_AcqCardCodeMsg		OBJ_set_ctype,22L
-
-#define SN_setct_AuthRevReqTBS		"setct-AuthRevReqTBS"
-#define NID_setct_AuthRevReqTBS		541
-#define OBJ_setct_AuthRevReqTBS		OBJ_set_ctype,23L
-
-#define SN_setct_AuthRevResData		"setct-AuthRevResData"
-#define NID_setct_AuthRevResData		542
-#define OBJ_setct_AuthRevResData		OBJ_set_ctype,24L
-
-#define SN_setct_AuthRevResTBS		"setct-AuthRevResTBS"
-#define NID_setct_AuthRevResTBS		543
-#define OBJ_setct_AuthRevResTBS		OBJ_set_ctype,25L
-
-#define SN_setct_CapReqTBS		"setct-CapReqTBS"
-#define NID_setct_CapReqTBS		544
-#define OBJ_setct_CapReqTBS		OBJ_set_ctype,26L
-
-#define SN_setct_CapReqTBSX		"setct-CapReqTBSX"
-#define NID_setct_CapReqTBSX		545
-#define OBJ_setct_CapReqTBSX		OBJ_set_ctype,27L
-
-#define SN_setct_CapResData		"setct-CapResData"
-#define NID_setct_CapResData		546
-#define OBJ_setct_CapResData		OBJ_set_ctype,28L
-
-#define SN_setct_CapRevReqTBS		"setct-CapRevReqTBS"
-#define NID_setct_CapRevReqTBS		547
-#define OBJ_setct_CapRevReqTBS		OBJ_set_ctype,29L
-
-#define SN_setct_CapRevReqTBSX		"setct-CapRevReqTBSX"
-#define NID_setct_CapRevReqTBSX		548
-#define OBJ_setct_CapRevReqTBSX		OBJ_set_ctype,30L
-
-#define SN_setct_CapRevResData		"setct-CapRevResData"
-#define NID_setct_CapRevResData		549
-#define OBJ_setct_CapRevResData		OBJ_set_ctype,31L
-
-#define SN_setct_CredReqTBS		"setct-CredReqTBS"
-#define NID_setct_CredReqTBS		550
-#define OBJ_setct_CredReqTBS		OBJ_set_ctype,32L
-
-#define SN_setct_CredReqTBSX		"setct-CredReqTBSX"
-#define NID_setct_CredReqTBSX		551
-#define OBJ_setct_CredReqTBSX		OBJ_set_ctype,33L
-
-#define SN_setct_CredResData		"setct-CredResData"
-#define NID_setct_CredResData		552
-#define OBJ_setct_CredResData		OBJ_set_ctype,34L
-
-#define SN_setct_CredRevReqTBS		"setct-CredRevReqTBS"
-#define NID_setct_CredRevReqTBS		553
-#define OBJ_setct_CredRevReqTBS		OBJ_set_ctype,35L
-
-#define SN_setct_CredRevReqTBSX		"setct-CredRevReqTBSX"
-#define NID_setct_CredRevReqTBSX		554
-#define OBJ_setct_CredRevReqTBSX		OBJ_set_ctype,36L
-
-#define SN_setct_CredRevResData		"setct-CredRevResData"
-#define NID_setct_CredRevResData		555
-#define OBJ_setct_CredRevResData		OBJ_set_ctype,37L
-
-#define SN_setct_PCertReqData		"setct-PCertReqData"
-#define NID_setct_PCertReqData		556
-#define OBJ_setct_PCertReqData		OBJ_set_ctype,38L
-
-#define SN_setct_PCertResTBS		"setct-PCertResTBS"
-#define NID_setct_PCertResTBS		557
-#define OBJ_setct_PCertResTBS		OBJ_set_ctype,39L
-
-#define SN_setct_BatchAdminReqData		"setct-BatchAdminReqData"
-#define NID_setct_BatchAdminReqData		558
-#define OBJ_setct_BatchAdminReqData		OBJ_set_ctype,40L
-
-#define SN_setct_BatchAdminResData		"setct-BatchAdminResData"
-#define NID_setct_BatchAdminResData		559
-#define OBJ_setct_BatchAdminResData		OBJ_set_ctype,41L
-
-#define SN_setct_CardCInitResTBS		"setct-CardCInitResTBS"
-#define NID_setct_CardCInitResTBS		560
-#define OBJ_setct_CardCInitResTBS		OBJ_set_ctype,42L
-
-#define SN_setct_MeAqCInitResTBS		"setct-MeAqCInitResTBS"
-#define NID_setct_MeAqCInitResTBS		561
-#define OBJ_setct_MeAqCInitResTBS		OBJ_set_ctype,43L
-
-#define SN_setct_RegFormResTBS		"setct-RegFormResTBS"
-#define NID_setct_RegFormResTBS		562
-#define OBJ_setct_RegFormResTBS		OBJ_set_ctype,44L
-
-#define SN_setct_CertReqData		"setct-CertReqData"
-#define NID_setct_CertReqData		563
-#define OBJ_setct_CertReqData		OBJ_set_ctype,45L
-
-#define SN_setct_CertReqTBS		"setct-CertReqTBS"
-#define NID_setct_CertReqTBS		564
-#define OBJ_setct_CertReqTBS		OBJ_set_ctype,46L
-
-#define SN_setct_CertResData		"setct-CertResData"
-#define NID_setct_CertResData		565
-#define OBJ_setct_CertResData		OBJ_set_ctype,47L
-
-#define SN_setct_CertInqReqTBS		"setct-CertInqReqTBS"
-#define NID_setct_CertInqReqTBS		566
-#define OBJ_setct_CertInqReqTBS		OBJ_set_ctype,48L
-
-#define SN_setct_ErrorTBS		"setct-ErrorTBS"
-#define NID_setct_ErrorTBS		567
-#define OBJ_setct_ErrorTBS		OBJ_set_ctype,49L
-
-#define SN_setct_PIDualSignedTBE		"setct-PIDualSignedTBE"
-#define NID_setct_PIDualSignedTBE		568
-#define OBJ_setct_PIDualSignedTBE		OBJ_set_ctype,50L
-
-#define SN_setct_PIUnsignedTBE		"setct-PIUnsignedTBE"
-#define NID_setct_PIUnsignedTBE		569
-#define OBJ_setct_PIUnsignedTBE		OBJ_set_ctype,51L
-
-#define SN_setct_AuthReqTBE		"setct-AuthReqTBE"
-#define NID_setct_AuthReqTBE		570
-#define OBJ_setct_AuthReqTBE		OBJ_set_ctype,52L
-
-#define SN_setct_AuthResTBE		"setct-AuthResTBE"
-#define NID_setct_AuthResTBE		571
-#define OBJ_setct_AuthResTBE		OBJ_set_ctype,53L
-
-#define SN_setct_AuthResTBEX		"setct-AuthResTBEX"
-#define NID_setct_AuthResTBEX		572
-#define OBJ_setct_AuthResTBEX		OBJ_set_ctype,54L
-
-#define SN_setct_AuthTokenTBE		"setct-AuthTokenTBE"
-#define NID_setct_AuthTokenTBE		573
-#define OBJ_setct_AuthTokenTBE		OBJ_set_ctype,55L
-
-#define SN_setct_CapTokenTBE		"setct-CapTokenTBE"
-#define NID_setct_CapTokenTBE		574
-#define OBJ_setct_CapTokenTBE		OBJ_set_ctype,56L
-
-#define SN_setct_CapTokenTBEX		"setct-CapTokenTBEX"
-#define NID_setct_CapTokenTBEX		575
-#define OBJ_setct_CapTokenTBEX		OBJ_set_ctype,57L
-
-#define SN_setct_AcqCardCodeMsgTBE		"setct-AcqCardCodeMsgTBE"
-#define NID_setct_AcqCardCodeMsgTBE		576
-#define OBJ_setct_AcqCardCodeMsgTBE		OBJ_set_ctype,58L
-
-#define SN_setct_AuthRevReqTBE		"setct-AuthRevReqTBE"
-#define NID_setct_AuthRevReqTBE		577
-#define OBJ_setct_AuthRevReqTBE		OBJ_set_ctype,59L
-
-#define SN_setct_AuthRevResTBE		"setct-AuthRevResTBE"
-#define NID_setct_AuthRevResTBE		578
-#define OBJ_setct_AuthRevResTBE		OBJ_set_ctype,60L
-
-#define SN_setct_AuthRevResTBEB		"setct-AuthRevResTBEB"
-#define NID_setct_AuthRevResTBEB		579
-#define OBJ_setct_AuthRevResTBEB		OBJ_set_ctype,61L
-
-#define SN_setct_CapReqTBE		"setct-CapReqTBE"
-#define NID_setct_CapReqTBE		580
-#define OBJ_setct_CapReqTBE		OBJ_set_ctype,62L
-
-#define SN_setct_CapReqTBEX		"setct-CapReqTBEX"
-#define NID_setct_CapReqTBEX		581
-#define OBJ_setct_CapReqTBEX		OBJ_set_ctype,63L
-
-#define SN_setct_CapResTBE		"setct-CapResTBE"
-#define NID_setct_CapResTBE		582
-#define OBJ_setct_CapResTBE		OBJ_set_ctype,64L
-
-#define SN_setct_CapRevReqTBE		"setct-CapRevReqTBE"
-#define NID_setct_CapRevReqTBE		583
-#define OBJ_setct_CapRevReqTBE		OBJ_set_ctype,65L
-
-#define SN_setct_CapRevReqTBEX		"setct-CapRevReqTBEX"
-#define NID_setct_CapRevReqTBEX		584
-#define OBJ_setct_CapRevReqTBEX		OBJ_set_ctype,66L
-
-#define SN_setct_CapRevResTBE		"setct-CapRevResTBE"
-#define NID_setct_CapRevResTBE		585
-#define OBJ_setct_CapRevResTBE		OBJ_set_ctype,67L
-
-#define SN_setct_CredReqTBE		"setct-CredReqTBE"
-#define NID_setct_CredReqTBE		586
-#define OBJ_setct_CredReqTBE		OBJ_set_ctype,68L
-
-#define SN_setct_CredReqTBEX		"setct-CredReqTBEX"
-#define NID_setct_CredReqTBEX		587
-#define OBJ_setct_CredReqTBEX		OBJ_set_ctype,69L
-
-#define SN_setct_CredResTBE		"setct-CredResTBE"
-#define NID_setct_CredResTBE		588
-#define OBJ_setct_CredResTBE		OBJ_set_ctype,70L
-
-#define SN_setct_CredRevReqTBE		"setct-CredRevReqTBE"
-#define NID_setct_CredRevReqTBE		589
-#define OBJ_setct_CredRevReqTBE		OBJ_set_ctype,71L
-
-#define SN_setct_CredRevReqTBEX		"setct-CredRevReqTBEX"
-#define NID_setct_CredRevReqTBEX		590
-#define OBJ_setct_CredRevReqTBEX		OBJ_set_ctype,72L
-
-#define SN_setct_CredRevResTBE		"setct-CredRevResTBE"
-#define NID_setct_CredRevResTBE		591
-#define OBJ_setct_CredRevResTBE		OBJ_set_ctype,73L
-
-#define SN_setct_BatchAdminReqTBE		"setct-BatchAdminReqTBE"
-#define NID_setct_BatchAdminReqTBE		592
-#define OBJ_setct_BatchAdminReqTBE		OBJ_set_ctype,74L
-
-#define SN_setct_BatchAdminResTBE		"setct-BatchAdminResTBE"
-#define NID_setct_BatchAdminResTBE		593
-#define OBJ_setct_BatchAdminResTBE		OBJ_set_ctype,75L
-
-#define SN_setct_RegFormReqTBE		"setct-RegFormReqTBE"
-#define NID_setct_RegFormReqTBE		594
-#define OBJ_setct_RegFormReqTBE		OBJ_set_ctype,76L
-
-#define SN_setct_CertReqTBE		"setct-CertReqTBE"
-#define NID_setct_CertReqTBE		595
-#define OBJ_setct_CertReqTBE		OBJ_set_ctype,77L
-
-#define SN_setct_CertReqTBEX		"setct-CertReqTBEX"
-#define NID_setct_CertReqTBEX		596
-#define OBJ_setct_CertReqTBEX		OBJ_set_ctype,78L
-
-#define SN_setct_CertResTBE		"setct-CertResTBE"
-#define NID_setct_CertResTBE		597
-#define OBJ_setct_CertResTBE		OBJ_set_ctype,79L
-
-#define SN_setct_CRLNotificationTBS		"setct-CRLNotificationTBS"
-#define NID_setct_CRLNotificationTBS		598
-#define OBJ_setct_CRLNotificationTBS		OBJ_set_ctype,80L
-
-#define SN_setct_CRLNotificationResTBS		"setct-CRLNotificationResTBS"
-#define NID_setct_CRLNotificationResTBS		599
-#define OBJ_setct_CRLNotificationResTBS		OBJ_set_ctype,81L
-
-#define SN_setct_BCIDistributionTBS		"setct-BCIDistributionTBS"
-#define NID_setct_BCIDistributionTBS		600
-#define OBJ_setct_BCIDistributionTBS		OBJ_set_ctype,82L
-
-#define SN_setext_genCrypt		"setext-genCrypt"
-#define LN_setext_genCrypt		"generic cryptogram"
-#define NID_setext_genCrypt		601
-#define OBJ_setext_genCrypt		OBJ_set_msgExt,1L
-
-#define SN_setext_miAuth		"setext-miAuth"
-#define LN_setext_miAuth		"merchant initiated auth"
-#define NID_setext_miAuth		602
-#define OBJ_setext_miAuth		OBJ_set_msgExt,3L
-
-#define SN_setext_pinSecure		"setext-pinSecure"
-#define NID_setext_pinSecure		603
-#define OBJ_setext_pinSecure		OBJ_set_msgExt,4L
-
-#define SN_setext_pinAny		"setext-pinAny"
-#define NID_setext_pinAny		604
-#define OBJ_setext_pinAny		OBJ_set_msgExt,5L
-
-#define SN_setext_track2		"setext-track2"
-#define NID_setext_track2		605
-#define OBJ_setext_track2		OBJ_set_msgExt,7L
-
-#define SN_setext_cv		"setext-cv"
-#define LN_setext_cv		"additional verification"
-#define NID_setext_cv		606
-#define OBJ_setext_cv		OBJ_set_msgExt,8L
-
-#define SN_set_policy_root		"set-policy-root"
-#define NID_set_policy_root		607
-#define OBJ_set_policy_root		OBJ_set_policy,0L
-
-#define SN_setCext_hashedRoot		"setCext-hashedRoot"
-#define NID_setCext_hashedRoot		608
-#define OBJ_setCext_hashedRoot		OBJ_set_certExt,0L
-
-#define SN_setCext_certType		"setCext-certType"
-#define NID_setCext_certType		609
-#define OBJ_setCext_certType		OBJ_set_certExt,1L
-
-#define SN_setCext_merchData		"setCext-merchData"
-#define NID_setCext_merchData		610
-#define OBJ_setCext_merchData		OBJ_set_certExt,2L
-
-#define SN_setCext_cCertRequired		"setCext-cCertRequired"
-#define NID_setCext_cCertRequired		611
-#define OBJ_setCext_cCertRequired		OBJ_set_certExt,3L
-
-#define SN_setCext_tunneling		"setCext-tunneling"
-#define NID_setCext_tunneling		612
-#define OBJ_setCext_tunneling		OBJ_set_certExt,4L
-
-#define SN_setCext_setExt		"setCext-setExt"
-#define NID_setCext_setExt		613
-#define OBJ_setCext_setExt		OBJ_set_certExt,5L
-
-#define SN_setCext_setQualf		"setCext-setQualf"
-#define NID_setCext_setQualf		614
-#define OBJ_setCext_setQualf		OBJ_set_certExt,6L
-
-#define SN_setCext_PGWYcapabilities		"setCext-PGWYcapabilities"
-#define NID_setCext_PGWYcapabilities		615
-#define OBJ_setCext_PGWYcapabilities		OBJ_set_certExt,7L
-
-#define SN_setCext_TokenIdentifier		"setCext-TokenIdentifier"
-#define NID_setCext_TokenIdentifier		616
-#define OBJ_setCext_TokenIdentifier		OBJ_set_certExt,8L
-
-#define SN_setCext_Track2Data		"setCext-Track2Data"
-#define NID_setCext_Track2Data		617
-#define OBJ_setCext_Track2Data		OBJ_set_certExt,9L
-
-#define SN_setCext_TokenType		"setCext-TokenType"
-#define NID_setCext_TokenType		618
-#define OBJ_setCext_TokenType		OBJ_set_certExt,10L
-
-#define SN_setCext_IssuerCapabilities		"setCext-IssuerCapabilities"
-#define NID_setCext_IssuerCapabilities		619
-#define OBJ_setCext_IssuerCapabilities		OBJ_set_certExt,11L
-
-#define SN_setAttr_Cert		"setAttr-Cert"
-#define NID_setAttr_Cert		620
-#define OBJ_setAttr_Cert		OBJ_set_attr,0L
-
-#define SN_setAttr_PGWYcap		"setAttr-PGWYcap"
-#define LN_setAttr_PGWYcap		"payment gateway capabilities"
-#define NID_setAttr_PGWYcap		621
-#define OBJ_setAttr_PGWYcap		OBJ_set_attr,1L
-
-#define SN_setAttr_TokenType		"setAttr-TokenType"
-#define NID_setAttr_TokenType		622
-#define OBJ_setAttr_TokenType		OBJ_set_attr,2L
-
-#define SN_setAttr_IssCap		"setAttr-IssCap"
-#define LN_setAttr_IssCap		"issuer capabilities"
-#define NID_setAttr_IssCap		623
-#define OBJ_setAttr_IssCap		OBJ_set_attr,3L
-
-#define SN_set_rootKeyThumb		"set-rootKeyThumb"
-#define NID_set_rootKeyThumb		624
-#define OBJ_set_rootKeyThumb		OBJ_setAttr_Cert,0L
-
-#define SN_set_addPolicy		"set-addPolicy"
-#define NID_set_addPolicy		625
-#define OBJ_set_addPolicy		OBJ_setAttr_Cert,1L
-
-#define SN_setAttr_Token_EMV		"setAttr-Token-EMV"
-#define NID_setAttr_Token_EMV		626
-#define OBJ_setAttr_Token_EMV		OBJ_setAttr_TokenType,1L
-
-#define SN_setAttr_Token_B0Prime		"setAttr-Token-B0Prime"
-#define NID_setAttr_Token_B0Prime		627
-#define OBJ_setAttr_Token_B0Prime		OBJ_setAttr_TokenType,2L
-
-#define SN_setAttr_IssCap_CVM		"setAttr-IssCap-CVM"
-#define NID_setAttr_IssCap_CVM		628
-#define OBJ_setAttr_IssCap_CVM		OBJ_setAttr_IssCap,3L
-
-#define SN_setAttr_IssCap_T2		"setAttr-IssCap-T2"
-#define NID_setAttr_IssCap_T2		629
-#define OBJ_setAttr_IssCap_T2		OBJ_setAttr_IssCap,4L
-
-#define SN_setAttr_IssCap_Sig		"setAttr-IssCap-Sig"
-#define NID_setAttr_IssCap_Sig		630
-#define OBJ_setAttr_IssCap_Sig		OBJ_setAttr_IssCap,5L
-
-#define SN_setAttr_GenCryptgrm		"setAttr-GenCryptgrm"
-#define LN_setAttr_GenCryptgrm		"generate cryptogram"
-#define NID_setAttr_GenCryptgrm		631
-#define OBJ_setAttr_GenCryptgrm		OBJ_setAttr_IssCap_CVM,1L
-
-#define SN_setAttr_T2Enc		"setAttr-T2Enc"
-#define LN_setAttr_T2Enc		"encrypted track 2"
-#define NID_setAttr_T2Enc		632
-#define OBJ_setAttr_T2Enc		OBJ_setAttr_IssCap_T2,1L
-
-#define SN_setAttr_T2cleartxt		"setAttr-T2cleartxt"
-#define LN_setAttr_T2cleartxt		"cleartext track 2"
-#define NID_setAttr_T2cleartxt		633
-#define OBJ_setAttr_T2cleartxt		OBJ_setAttr_IssCap_T2,2L
-
-#define SN_setAttr_TokICCsig		"setAttr-TokICCsig"
-#define LN_setAttr_TokICCsig		"ICC or token signature"
-#define NID_setAttr_TokICCsig		634
-#define OBJ_setAttr_TokICCsig		OBJ_setAttr_IssCap_Sig,1L
-
-#define SN_setAttr_SecDevSig		"setAttr-SecDevSig"
-#define LN_setAttr_SecDevSig		"secure device signature"
-#define NID_setAttr_SecDevSig		635
-#define OBJ_setAttr_SecDevSig		OBJ_setAttr_IssCap_Sig,2L
-
-#define SN_set_brand_IATA_ATA		"set-brand-IATA-ATA"
-#define NID_set_brand_IATA_ATA		636
-#define OBJ_set_brand_IATA_ATA		OBJ_set_brand,1L
-
-#define SN_set_brand_Diners		"set-brand-Diners"
-#define NID_set_brand_Diners		637
-#define OBJ_set_brand_Diners		OBJ_set_brand,30L
-
-#define SN_set_brand_AmericanExpress		"set-brand-AmericanExpress"
-#define NID_set_brand_AmericanExpress		638
-#define OBJ_set_brand_AmericanExpress		OBJ_set_brand,34L
-
-#define SN_set_brand_JCB		"set-brand-JCB"
-#define NID_set_brand_JCB		639
-#define OBJ_set_brand_JCB		OBJ_set_brand,35L
-
-#define SN_set_brand_Visa		"set-brand-Visa"
-#define NID_set_brand_Visa		640
-#define OBJ_set_brand_Visa		OBJ_set_brand,4L
-
-#define SN_set_brand_MasterCard		"set-brand-MasterCard"
-#define NID_set_brand_MasterCard		641
-#define OBJ_set_brand_MasterCard		OBJ_set_brand,5L
-
-#define SN_set_brand_Novus		"set-brand-Novus"
-#define NID_set_brand_Novus		642
-#define OBJ_set_brand_Novus		OBJ_set_brand,6011L
-
-#define SN_des_cdmf		"DES-CDMF"
-#define LN_des_cdmf		"des-cdmf"
-#define NID_des_cdmf		643
-#define OBJ_des_cdmf		OBJ_rsadsi,3L,10L
-
-#define SN_rsaOAEPEncryptionSET		"rsaOAEPEncryptionSET"
-#define NID_rsaOAEPEncryptionSET		644
-#define OBJ_rsaOAEPEncryptionSET		OBJ_rsadsi,1L,1L,6L
-
-#define SN_ipsec3		"Oakley-EC2N-3"
-#define LN_ipsec3		"ipsec3"
-#define NID_ipsec3		749
-
-#define SN_ipsec4		"Oakley-EC2N-4"
-#define LN_ipsec4		"ipsec4"
-#define NID_ipsec4		750
-
-#define SN_camellia_128_cbc		"CAMELLIA-128-CBC"
-#define LN_camellia_128_cbc		"camellia-128-cbc"
-#define NID_camellia_128_cbc		751
-#define OBJ_camellia_128_cbc		1L,2L,392L,200011L,61L,1L,1L,1L,2L
-
-#define SN_camellia_192_cbc		"CAMELLIA-192-CBC"
-#define LN_camellia_192_cbc		"camellia-192-cbc"
-#define NID_camellia_192_cbc		752
-#define OBJ_camellia_192_cbc		1L,2L,392L,200011L,61L,1L,1L,1L,3L
-
-#define SN_camellia_256_cbc		"CAMELLIA-256-CBC"
-#define LN_camellia_256_cbc		"camellia-256-cbc"
-#define NID_camellia_256_cbc		753
-#define OBJ_camellia_256_cbc		1L,2L,392L,200011L,61L,1L,1L,1L,4L
-
-#define OBJ_ntt_ds		0L,3L,4401L,5L
-
-#define OBJ_camellia		OBJ_ntt_ds,3L,1L,9L
-
-#define SN_camellia_128_ecb		"CAMELLIA-128-ECB"
-#define LN_camellia_128_ecb		"camellia-128-ecb"
-#define NID_camellia_128_ecb		754
-#define OBJ_camellia_128_ecb		OBJ_camellia,1L
-
-#define SN_camellia_128_ofb128		"CAMELLIA-128-OFB"
-#define LN_camellia_128_ofb128		"camellia-128-ofb"
-#define NID_camellia_128_ofb128		766
-#define OBJ_camellia_128_ofb128		OBJ_camellia,3L
-
-#define SN_camellia_128_cfb128		"CAMELLIA-128-CFB"
-#define LN_camellia_128_cfb128		"camellia-128-cfb"
-#define NID_camellia_128_cfb128		757
-#define OBJ_camellia_128_cfb128		OBJ_camellia,4L
-
-#define SN_camellia_192_ecb		"CAMELLIA-192-ECB"
-#define LN_camellia_192_ecb		"camellia-192-ecb"
-#define NID_camellia_192_ecb		755
-#define OBJ_camellia_192_ecb		OBJ_camellia,21L
-
-#define SN_camellia_192_ofb128		"CAMELLIA-192-OFB"
-#define LN_camellia_192_ofb128		"camellia-192-ofb"
-#define NID_camellia_192_ofb128		767
-#define OBJ_camellia_192_ofb128		OBJ_camellia,23L
-
-#define SN_camellia_192_cfb128		"CAMELLIA-192-CFB"
-#define LN_camellia_192_cfb128		"camellia-192-cfb"
-#define NID_camellia_192_cfb128		758
-#define OBJ_camellia_192_cfb128		OBJ_camellia,24L
-
-#define SN_camellia_256_ecb		"CAMELLIA-256-ECB"
-#define LN_camellia_256_ecb		"camellia-256-ecb"
-#define NID_camellia_256_ecb		756
-#define OBJ_camellia_256_ecb		OBJ_camellia,41L
-
-#define SN_camellia_256_ofb128		"CAMELLIA-256-OFB"
-#define LN_camellia_256_ofb128		"camellia-256-ofb"
-#define NID_camellia_256_ofb128		768
-#define OBJ_camellia_256_ofb128		OBJ_camellia,43L
-
-#define SN_camellia_256_cfb128		"CAMELLIA-256-CFB"
-#define LN_camellia_256_cfb128		"camellia-256-cfb"
-#define NID_camellia_256_cfb128		759
-#define OBJ_camellia_256_cfb128		OBJ_camellia,44L
-
-#define SN_camellia_128_cfb1		"CAMELLIA-128-CFB1"
-#define LN_camellia_128_cfb1		"camellia-128-cfb1"
-#define NID_camellia_128_cfb1		760
-
-#define SN_camellia_192_cfb1		"CAMELLIA-192-CFB1"
-#define LN_camellia_192_cfb1		"camellia-192-cfb1"
-#define NID_camellia_192_cfb1		761
-
-#define SN_camellia_256_cfb1		"CAMELLIA-256-CFB1"
-#define LN_camellia_256_cfb1		"camellia-256-cfb1"
-#define NID_camellia_256_cfb1		762
-
-#define SN_camellia_128_cfb8		"CAMELLIA-128-CFB8"
-#define LN_camellia_128_cfb8		"camellia-128-cfb8"
-#define NID_camellia_128_cfb8		763
-
-#define SN_camellia_192_cfb8		"CAMELLIA-192-CFB8"
-#define LN_camellia_192_cfb8		"camellia-192-cfb8"
-#define NID_camellia_192_cfb8		764
-
-#define SN_camellia_256_cfb8		"CAMELLIA-256-CFB8"
-#define LN_camellia_256_cfb8		"camellia-256-cfb8"
-#define NID_camellia_256_cfb8		765
-
diff --git a/crypto/openssl/crypto/objects/obj_mac.num b/crypto/openssl/crypto/objects/obj_mac.num
deleted file mode 100644
index eaa01787613c..000000000000
--- a/crypto/openssl/crypto/objects/obj_mac.num
+++ /dev/null
@@ -1,771 +0,0 @@
-undef		0
-rsadsi		1
-pkcs		2
-md2		3
-md5		4
-rc4		5
-rsaEncryption		6
-md2WithRSAEncryption		7
-md5WithRSAEncryption		8
-pbeWithMD2AndDES_CBC		9
-pbeWithMD5AndDES_CBC		10
-X500		11
-X509		12
-commonName		13
-countryName		14
-localityName		15
-stateOrProvinceName		16
-organizationName		17
-organizationalUnitName		18
-rsa		19
-pkcs7		20
-pkcs7_data		21
-pkcs7_signed		22
-pkcs7_enveloped		23
-pkcs7_signedAndEnveloped		24
-pkcs7_digest		25
-pkcs7_encrypted		26
-pkcs3		27
-dhKeyAgreement		28
-des_ecb		29
-des_cfb64		30
-des_cbc		31
-des_ede_ecb		32
-des_ede3_ecb		33
-idea_cbc		34
-idea_cfb64		35
-idea_ecb		36
-rc2_cbc		37
-rc2_ecb		38
-rc2_cfb64		39
-rc2_ofb64		40
-sha		41
-shaWithRSAEncryption		42
-des_ede_cbc		43
-des_ede3_cbc		44
-des_ofb64		45
-idea_ofb64		46
-pkcs9		47
-pkcs9_emailAddress		48
-pkcs9_unstructuredName		49
-pkcs9_contentType		50
-pkcs9_messageDigest		51
-pkcs9_signingTime		52
-pkcs9_countersignature		53
-pkcs9_challengePassword		54
-pkcs9_unstructuredAddress		55
-pkcs9_extCertAttributes		56
-netscape		57
-netscape_cert_extension		58
-netscape_data_type		59
-des_ede_cfb64		60
-des_ede3_cfb64		61
-des_ede_ofb64		62
-des_ede3_ofb64		63
-sha1		64
-sha1WithRSAEncryption		65
-dsaWithSHA		66
-dsa_2		67
-pbeWithSHA1AndRC2_CBC		68
-id_pbkdf2		69
-dsaWithSHA1_2		70
-netscape_cert_type		71
-netscape_base_url		72
-netscape_revocation_url		73
-netscape_ca_revocation_url		74
-netscape_renewal_url		75
-netscape_ca_policy_url		76
-netscape_ssl_server_name		77
-netscape_comment		78
-netscape_cert_sequence		79
-desx_cbc		80
-id_ce		81
-subject_key_identifier		82
-key_usage		83
-private_key_usage_period		84
-subject_alt_name		85
-issuer_alt_name		86
-basic_constraints		87
-crl_number		88
-certificate_policies		89
-authority_key_identifier		90
-bf_cbc		91
-bf_ecb		92
-bf_cfb64		93
-bf_ofb64		94
-mdc2		95
-mdc2WithRSA		96
-rc4_40		97
-rc2_40_cbc		98
-givenName		99
-surname		100
-initials		101
-uniqueIdentifier		102
-crl_distribution_points		103
-md5WithRSA		104
-serialNumber		105
-title		106
-description		107
-cast5_cbc		108
-cast5_ecb		109
-cast5_cfb64		110
-cast5_ofb64		111
-pbeWithMD5AndCast5_CBC		112
-dsaWithSHA1		113
-md5_sha1		114
-sha1WithRSA		115
-dsa		116
-ripemd160		117
-ripemd160WithRSA		119
-rc5_cbc		120
-rc5_ecb		121
-rc5_cfb64		122
-rc5_ofb64		123
-rle_compression		124
-zlib_compression		125
-ext_key_usage		126
-id_pkix		127
-id_kp		128
-server_auth		129
-client_auth		130
-code_sign		131
-email_protect		132
-time_stamp		133
-ms_code_ind		134
-ms_code_com		135
-ms_ctl_sign		136
-ms_sgc		137
-ms_efs		138
-ns_sgc		139
-delta_crl		140
-crl_reason		141
-invalidity_date		142
-sxnet		143
-pbe_WithSHA1And128BitRC4		144
-pbe_WithSHA1And40BitRC4		145
-pbe_WithSHA1And3_Key_TripleDES_CBC		146
-pbe_WithSHA1And2_Key_TripleDES_CBC		147
-pbe_WithSHA1And128BitRC2_CBC		148
-pbe_WithSHA1And40BitRC2_CBC		149
-keyBag		150
-pkcs8ShroudedKeyBag		151
-certBag		152
-crlBag		153
-secretBag		154
-safeContentsBag		155
-friendlyName		156
-localKeyID		157
-x509Certificate		158
-sdsiCertificate		159
-x509Crl		160
-pbes2		161
-pbmac1		162
-hmacWithSHA1		163
-id_qt_cps		164
-id_qt_unotice		165
-rc2_64_cbc		166
-SMIMECapabilities		167
-pbeWithMD2AndRC2_CBC		168
-pbeWithMD5AndRC2_CBC		169
-pbeWithSHA1AndDES_CBC		170
-ms_ext_req		171
-ext_req		172
-name		173
-dnQualifier		174
-id_pe		175
-id_ad		176
-info_access		177
-ad_OCSP		178
-ad_ca_issuers		179
-OCSP_sign		180
-iso		181
-member_body		182
-ISO_US		183
-X9_57		184
-X9cm		185
-pkcs1		186
-pkcs5		187
-SMIME		188
-id_smime_mod		189
-id_smime_ct		190
-id_smime_aa		191
-id_smime_alg		192
-id_smime_cd		193
-id_smime_spq		194
-id_smime_cti		195
-id_smime_mod_cms		196
-id_smime_mod_ess		197
-id_smime_mod_oid		198
-id_smime_mod_msg_v3		199
-id_smime_mod_ets_eSignature_88		200
-id_smime_mod_ets_eSignature_97		201
-id_smime_mod_ets_eSigPolicy_88		202
-id_smime_mod_ets_eSigPolicy_97		203
-id_smime_ct_receipt		204
-id_smime_ct_authData		205
-id_smime_ct_publishCert		206
-id_smime_ct_TSTInfo		207
-id_smime_ct_TDTInfo		208
-id_smime_ct_contentInfo		209
-id_smime_ct_DVCSRequestData		210
-id_smime_ct_DVCSResponseData		211
-id_smime_aa_receiptRequest		212
-id_smime_aa_securityLabel		213
-id_smime_aa_mlExpandHistory		214
-id_smime_aa_contentHint		215
-id_smime_aa_msgSigDigest		216
-id_smime_aa_encapContentType		217
-id_smime_aa_contentIdentifier		218
-id_smime_aa_macValue		219
-id_smime_aa_equivalentLabels		220
-id_smime_aa_contentReference		221
-id_smime_aa_encrypKeyPref		222
-id_smime_aa_signingCertificate		223
-id_smime_aa_smimeEncryptCerts		224
-id_smime_aa_timeStampToken		225
-id_smime_aa_ets_sigPolicyId		226
-id_smime_aa_ets_commitmentType		227
-id_smime_aa_ets_signerLocation		228
-id_smime_aa_ets_signerAttr		229
-id_smime_aa_ets_otherSigCert		230
-id_smime_aa_ets_contentTimestamp		231
-id_smime_aa_ets_CertificateRefs		232
-id_smime_aa_ets_RevocationRefs		233
-id_smime_aa_ets_certValues		234
-id_smime_aa_ets_revocationValues		235
-id_smime_aa_ets_escTimeStamp		236
-id_smime_aa_ets_certCRLTimestamp		237
-id_smime_aa_ets_archiveTimeStamp		238
-id_smime_aa_signatureType		239
-id_smime_aa_dvcs_dvc		240
-id_smime_alg_ESDHwith3DES		241
-id_smime_alg_ESDHwithRC2		242
-id_smime_alg_3DESwrap		243
-id_smime_alg_RC2wrap		244
-id_smime_alg_ESDH		245
-id_smime_alg_CMS3DESwrap		246
-id_smime_alg_CMSRC2wrap		247
-id_smime_cd_ldap		248
-id_smime_spq_ets_sqt_uri		249
-id_smime_spq_ets_sqt_unotice		250
-id_smime_cti_ets_proofOfOrigin		251
-id_smime_cti_ets_proofOfReceipt		252
-id_smime_cti_ets_proofOfDelivery		253
-id_smime_cti_ets_proofOfSender		254
-id_smime_cti_ets_proofOfApproval		255
-id_smime_cti_ets_proofOfCreation		256
-md4		257
-id_pkix_mod		258
-id_qt		259
-id_it		260
-id_pkip		261
-id_alg		262
-id_cmc		263
-id_on		264
-id_pda		265
-id_aca		266
-id_qcs		267
-id_cct		268
-id_pkix1_explicit_88		269
-id_pkix1_implicit_88		270
-id_pkix1_explicit_93		271
-id_pkix1_implicit_93		272
-id_mod_crmf		273
-id_mod_cmc		274
-id_mod_kea_profile_88		275
-id_mod_kea_profile_93		276
-id_mod_cmp		277
-id_mod_qualified_cert_88		278
-id_mod_qualified_cert_93		279
-id_mod_attribute_cert		280
-id_mod_timestamp_protocol		281
-id_mod_ocsp		282
-id_mod_dvcs		283
-id_mod_cmp2000		284
-biometricInfo		285
-qcStatements		286
-ac_auditEntity		287
-ac_targeting		288
-aaControls		289
-sbgp_ipAddrBlock		290
-sbgp_autonomousSysNum		291
-sbgp_routerIdentifier		292
-textNotice		293
-ipsecEndSystem		294
-ipsecTunnel		295
-ipsecUser		296
-dvcs		297
-id_it_caProtEncCert		298
-id_it_signKeyPairTypes		299
-id_it_encKeyPairTypes		300
-id_it_preferredSymmAlg		301
-id_it_caKeyUpdateInfo		302
-id_it_currentCRL		303
-id_it_unsupportedOIDs		304
-id_it_subscriptionRequest		305
-id_it_subscriptionResponse		306
-id_it_keyPairParamReq		307
-id_it_keyPairParamRep		308
-id_it_revPassphrase		309
-id_it_implicitConfirm		310
-id_it_confirmWaitTime		311
-id_it_origPKIMessage		312
-id_regCtrl		313
-id_regInfo		314
-id_regCtrl_regToken		315
-id_regCtrl_authenticator		316
-id_regCtrl_pkiPublicationInfo		317
-id_regCtrl_pkiArchiveOptions		318
-id_regCtrl_oldCertID		319
-id_regCtrl_protocolEncrKey		320
-id_regInfo_utf8Pairs		321
-id_regInfo_certReq		322
-id_alg_des40		323
-id_alg_noSignature		324
-id_alg_dh_sig_hmac_sha1		325
-id_alg_dh_pop		326
-id_cmc_statusInfo		327
-id_cmc_identification		328
-id_cmc_identityProof		329
-id_cmc_dataReturn		330
-id_cmc_transactionId		331
-id_cmc_senderNonce		332
-id_cmc_recipientNonce		333
-id_cmc_addExtensions		334
-id_cmc_encryptedPOP		335
-id_cmc_decryptedPOP		336
-id_cmc_lraPOPWitness		337
-id_cmc_getCert		338
-id_cmc_getCRL		339
-id_cmc_revokeRequest		340
-id_cmc_regInfo		341
-id_cmc_responseInfo		342
-id_cmc_queryPending		343
-id_cmc_popLinkRandom		344
-id_cmc_popLinkWitness		345
-id_cmc_confirmCertAcceptance		346
-id_on_personalData		347
-id_pda_dateOfBirth		348
-id_pda_placeOfBirth		349
-id_pda_pseudonym		350
-id_pda_gender		351
-id_pda_countryOfCitizenship		352
-id_pda_countryOfResidence		353
-id_aca_authenticationInfo		354
-id_aca_accessIdentity		355
-id_aca_chargingIdentity		356
-id_aca_group		357
-id_aca_role		358
-id_qcs_pkixQCSyntax_v1		359
-id_cct_crs		360
-id_cct_PKIData		361
-id_cct_PKIResponse		362
-ad_timeStamping		363
-ad_dvcs		364
-id_pkix_OCSP_basic		365
-id_pkix_OCSP_Nonce		366
-id_pkix_OCSP_CrlID		367
-id_pkix_OCSP_acceptableResponses		368
-id_pkix_OCSP_noCheck		369
-id_pkix_OCSP_archiveCutoff		370
-id_pkix_OCSP_serviceLocator		371
-id_pkix_OCSP_extendedStatus		372
-id_pkix_OCSP_valid		373
-id_pkix_OCSP_path		374
-id_pkix_OCSP_trustRoot		375
-algorithm		376
-rsaSignature		377
-X500algorithms		378
-org		379
-dod		380
-iana		381
-Directory		382
-Management		383
-Experimental		384
-Private		385
-Security		386
-SNMPv2		387
-Mail		388
-Enterprises		389
-dcObject		390
-domainComponent		391
-Domain		392
-joint_iso_ccitt		393
-selected_attribute_types		394
-clearance		395
-md4WithRSAEncryption		396
-ac_proxying		397
-sinfo_access		398
-id_aca_encAttrs		399
-role		400
-policy_constraints		401
-target_information		402
-no_rev_avail		403
-ccitt		404
-ansi_X9_62		405
-X9_62_prime_field		406
-X9_62_characteristic_two_field		407
-X9_62_id_ecPublicKey		408
-X9_62_prime192v1		409
-X9_62_prime192v2		410
-X9_62_prime192v3		411
-X9_62_prime239v1		412
-X9_62_prime239v2		413
-X9_62_prime239v3		414
-X9_62_prime256v1		415
-ecdsa_with_SHA1		416
-ms_csp_name		417
-aes_128_ecb		418
-aes_128_cbc		419
-aes_128_ofb128		420
-aes_128_cfb128		421
-aes_192_ecb		422
-aes_192_cbc		423
-aes_192_ofb128		424
-aes_192_cfb128		425
-aes_256_ecb		426
-aes_256_cbc		427
-aes_256_ofb128		428
-aes_256_cfb128		429
-hold_instruction_code		430
-hold_instruction_none		431
-hold_instruction_call_issuer		432
-hold_instruction_reject		433
-data		434
-pss		435
-ucl		436
-pilot		437
-pilotAttributeType		438
-pilotAttributeSyntax		439
-pilotObjectClass		440
-pilotGroups		441
-iA5StringSyntax		442
-caseIgnoreIA5StringSyntax		443
-pilotObject		444
-pilotPerson		445
-account		446
-document		447
-room		448
-documentSeries		449
-rFC822localPart		450
-dNSDomain		451
-domainRelatedObject		452
-friendlyCountry		453
-simpleSecurityObject		454
-pilotOrganization		455
-pilotDSA		456
-qualityLabelledData		457
-userId		458
-textEncodedORAddress		459
-rfc822Mailbox		460
-info		461
-favouriteDrink		462
-roomNumber		463
-photo		464
-userClass		465
-host		466
-manager		467
-documentIdentifier		468
-documentTitle		469
-documentVersion		470
-documentAuthor		471
-documentLocation		472
-homeTelephoneNumber		473
-secretary		474
-otherMailbox		475
-lastModifiedTime		476
-lastModifiedBy		477
-aRecord		478
-pilotAttributeType27		479
-mXRecord		480
-nSRecord		481
-sOARecord		482
-cNAMERecord		483
-associatedDomain		484
-associatedName		485
-homePostalAddress		486
-personalTitle		487
-mobileTelephoneNumber		488
-pagerTelephoneNumber		489
-friendlyCountryName		490
-organizationalStatus		491
-janetMailbox		492
-mailPreferenceOption		493
-buildingName		494
-dSAQuality		495
-singleLevelQuality		496
-subtreeMinimumQuality		497
-subtreeMaximumQuality		498
-personalSignature		499
-dITRedirect		500
-audio		501
-documentPublisher		502
-x500UniqueIdentifier		503
-mime_mhs		504
-mime_mhs_headings		505
-mime_mhs_bodies		506
-id_hex_partial_message		507
-id_hex_multipart_message		508
-generationQualifier		509
-pseudonym		510
-InternationalRA		511
-id_set		512
-set_ctype		513
-set_msgExt		514
-set_attr		515
-set_policy		516
-set_certExt		517
-set_brand		518
-setct_PANData		519
-setct_PANToken		520
-setct_PANOnly		521
-setct_OIData		522
-setct_PI		523
-setct_PIData		524
-setct_PIDataUnsigned		525
-setct_HODInput		526
-setct_AuthResBaggage		527
-setct_AuthRevReqBaggage		528
-setct_AuthRevResBaggage		529
-setct_CapTokenSeq		530
-setct_PInitResData		531
-setct_PI_TBS		532
-setct_PResData		533
-setct_AuthReqTBS		534
-setct_AuthResTBS		535
-setct_AuthResTBSX		536
-setct_AuthTokenTBS		537
-setct_CapTokenData		538
-setct_CapTokenTBS		539
-setct_AcqCardCodeMsg		540
-setct_AuthRevReqTBS		541
-setct_AuthRevResData		542
-setct_AuthRevResTBS		543
-setct_CapReqTBS		544
-setct_CapReqTBSX		545
-setct_CapResData		546
-setct_CapRevReqTBS		547
-setct_CapRevReqTBSX		548
-setct_CapRevResData		549
-setct_CredReqTBS		550
-setct_CredReqTBSX		551
-setct_CredResData		552
-setct_CredRevReqTBS		553
-setct_CredRevReqTBSX		554
-setct_CredRevResData		555
-setct_PCertReqData		556
-setct_PCertResTBS		557
-setct_BatchAdminReqData		558
-setct_BatchAdminResData		559
-setct_CardCInitResTBS		560
-setct_MeAqCInitResTBS		561
-setct_RegFormResTBS		562
-setct_CertReqData		563
-setct_CertReqTBS		564
-setct_CertResData		565
-setct_CertInqReqTBS		566
-setct_ErrorTBS		567
-setct_PIDualSignedTBE		568
-setct_PIUnsignedTBE		569
-setct_AuthReqTBE		570
-setct_AuthResTBE		571
-setct_AuthResTBEX		572
-setct_AuthTokenTBE		573
-setct_CapTokenTBE		574
-setct_CapTokenTBEX		575
-setct_AcqCardCodeMsgTBE		576
-setct_AuthRevReqTBE		577
-setct_AuthRevResTBE		578
-setct_AuthRevResTBEB		579
-setct_CapReqTBE		580
-setct_CapReqTBEX		581
-setct_CapResTBE		582
-setct_CapRevReqTBE		583
-setct_CapRevReqTBEX		584
-setct_CapRevResTBE		585
-setct_CredReqTBE		586
-setct_CredReqTBEX		587
-setct_CredResTBE		588
-setct_CredRevReqTBE		589
-setct_CredRevReqTBEX		590
-setct_CredRevResTBE		591
-setct_BatchAdminReqTBE		592
-setct_BatchAdminResTBE		593
-setct_RegFormReqTBE		594
-setct_CertReqTBE		595
-setct_CertReqTBEX		596
-setct_CertResTBE		597
-setct_CRLNotificationTBS		598
-setct_CRLNotificationResTBS		599
-setct_BCIDistributionTBS		600
-setext_genCrypt		601
-setext_miAuth		602
-setext_pinSecure		603
-setext_pinAny		604
-setext_track2		605
-setext_cv		606
-set_policy_root		607
-setCext_hashedRoot		608
-setCext_certType		609
-setCext_merchData		610
-setCext_cCertRequired		611
-setCext_tunneling		612
-setCext_setExt		613
-setCext_setQualf		614
-setCext_PGWYcapabilities		615
-setCext_TokenIdentifier		616
-setCext_Track2Data		617
-setCext_TokenType		618
-setCext_IssuerCapabilities		619
-setAttr_Cert		620
-setAttr_PGWYcap		621
-setAttr_TokenType		622
-setAttr_IssCap		623
-set_rootKeyThumb		624
-set_addPolicy		625
-setAttr_Token_EMV		626
-setAttr_Token_B0Prime		627
-setAttr_IssCap_CVM		628
-setAttr_IssCap_T2		629
-setAttr_IssCap_Sig		630
-setAttr_GenCryptgrm		631
-setAttr_T2Enc		632
-setAttr_T2cleartxt		633
-setAttr_TokICCsig		634
-setAttr_SecDevSig		635
-set_brand_IATA_ATA		636
-set_brand_Diners		637
-set_brand_AmericanExpress		638
-set_brand_JCB		639
-set_brand_Visa		640
-set_brand_MasterCard		641
-set_brand_Novus		642
-des_cdmf		643
-rsaOAEPEncryptionSET		644
-itu_t		645
-joint_iso_itu_t		646
-international_organizations		647
-ms_smartcard_login		648
-ms_upn		649
-aes_128_cfb1		650
-aes_192_cfb1		651
-aes_256_cfb1		652
-aes_128_cfb8		653
-aes_192_cfb8		654
-aes_256_cfb8		655
-des_cfb1		656
-des_cfb8		657
-des_ede3_cfb1		658
-des_ede3_cfb8		659
-streetAddress		660
-postalCode		661
-id_ppl		662
-proxyCertInfo		663
-id_ppl_anyLanguage		664
-id_ppl_inheritAll		665
-name_constraints		666
-Independent		667
-sha256WithRSAEncryption		668
-sha384WithRSAEncryption		669
-sha512WithRSAEncryption		670
-sha224WithRSAEncryption		671
-sha256		672
-sha384		673
-sha512		674
-sha224		675
-identified_organization		676
-certicom_arc		677
-wap		678
-wap_wsg		679
-X9_62_id_characteristic_two_basis		680
-X9_62_onBasis		681
-X9_62_tpBasis		682
-X9_62_ppBasis		683
-X9_62_c2pnb163v1		684
-X9_62_c2pnb163v2		685
-X9_62_c2pnb163v3		686
-X9_62_c2pnb176v1		687
-X9_62_c2tnb191v1		688
-X9_62_c2tnb191v2		689
-X9_62_c2tnb191v3		690
-X9_62_c2onb191v4		691
-X9_62_c2onb191v5		692
-X9_62_c2pnb208w1		693
-X9_62_c2tnb239v1		694
-X9_62_c2tnb239v2		695
-X9_62_c2tnb239v3		696
-X9_62_c2onb239v4		697
-X9_62_c2onb239v5		698
-X9_62_c2pnb272w1		699
-X9_62_c2pnb304w1		700
-X9_62_c2tnb359v1		701
-X9_62_c2pnb368w1		702
-X9_62_c2tnb431r1		703
-secp112r1		704
-secp112r2		705
-secp128r1		706
-secp128r2		707
-secp160k1		708
-secp160r1		709
-secp160r2		710
-secp192k1		711
-secp224k1		712
-secp224r1		713
-secp256k1		714
-secp384r1		715
-secp521r1		716
-sect113r1		717
-sect113r2		718
-sect131r1		719
-sect131r2		720
-sect163k1		721
-sect163r1		722
-sect163r2		723
-sect193r1		724
-sect193r2		725
-sect233k1		726
-sect233r1		727
-sect239k1		728
-sect283k1		729
-sect283r1		730
-sect409k1		731
-sect409r1		732
-sect571k1		733
-sect571r1		734
-wap_wsg_idm_ecid_wtls1		735
-wap_wsg_idm_ecid_wtls3		736
-wap_wsg_idm_ecid_wtls4		737
-wap_wsg_idm_ecid_wtls5		738
-wap_wsg_idm_ecid_wtls6		739
-wap_wsg_idm_ecid_wtls7		740
-wap_wsg_idm_ecid_wtls8		741
-wap_wsg_idm_ecid_wtls9		742
-wap_wsg_idm_ecid_wtls10		743
-wap_wsg_idm_ecid_wtls11		744
-wap_wsg_idm_ecid_wtls12		745
-any_policy		746
-policy_mappings		747
-inhibit_any_policy		748
-ipsec3		749
-ipsec4		750
-camellia_128_cbc		751
-camellia_192_cbc		752
-camellia_256_cbc		753
-camellia_128_ecb		754
-camellia_192_ecb		755
-camellia_256_ecb		756
-camellia_128_cfb128		757
-camellia_192_cfb128		758
-camellia_256_cfb128		759
-camellia_128_cfb1		760
-camellia_192_cfb1		761
-camellia_256_cfb1		762
-camellia_128_cfb8		763
-camellia_192_cfb8		764
-camellia_256_cfb8		765
-camellia_128_ofb128		766
-camellia_192_ofb128		767
-camellia_256_ofb128		768
-subject_directory_attributes		769
-issuing_distribution_point		770
-certificate_issuer		771
diff --git a/crypto/openssl/crypto/objects/objects.README b/crypto/openssl/crypto/objects/objects.README
deleted file mode 100644
index 4d745508d830..000000000000
--- a/crypto/openssl/crypto/objects/objects.README
+++ /dev/null
@@ -1,44 +0,0 @@
-objects.txt syntax
-------------------
-
-To cover all the naming hacks that were previously in objects.h needed some
-kind of hacks in objects.txt.
-
-The basic syntax for adding an object is as follows:
-
-	1 2 3 4		: shortName	: Long Name
-
-		If the long name doesn't contain spaces, or no short name
-		exists, the long name is used as basis for the base name
-		in C.  Otherwise, the short name is used.
-
-		The base name (let's call it 'base') will then be used to
-		create the C macros SN_base, LN_base, NID_base and OBJ_base.
-
-		Note that if the base name contains spaces, dashes or periods,
-		those will be converte to underscore.
-
-Then there are some extra commands:
-
-	!Alias foo 1 2 3 4
-
-		This juts makes a name foo for an OID.  The C macro
-		OBJ_foo will be created as a result.
-
-	!Cname foo
-
-		This makes sure that the name foo will be used as base name
-		in C.
-
-	!module foo
-	1 2 3 4		: shortName	: Long Name
-	!global
-
-		The !module command was meant to define a kind of modularity.
-		What it does is to make sure the module name is prepended
-		to the base name.  !global turns this off.  This construction
-		is not recursive.
-
-Lines starting with # are treated as comments, as well as any line starting
-with ! and not matching the commands above.
-
diff --git a/crypto/openssl/crypto/objects/objects.h b/crypto/openssl/crypto/objects/objects.h
deleted file mode 100644
index 7242f76fb0f1..000000000000
--- a/crypto/openssl/crypto/objects/objects.h
+++ /dev/null
@@ -1,1049 +0,0 @@
-/* crypto/objects/objects.h */
-/* Copyright (C) 1995-1998 Eric Young (eay@cryptsoft.com)
- * All rights reserved.
- *
- * This package is an SSL implementation written
- * by Eric Young (eay@cryptsoft.com).
- * The implementation was written so as to conform with Netscapes SSL.
- * 
- * This library is free for commercial and non-commercial use as long as
- * the following conditions are aheared to.  The following conditions
- * apply to all code found in this distribution, be it the RC4, RSA,
- * lhash, DES, etc., code; not just the SSL code.  The SSL documentation
- * included with this distribution is covered by the same copyright terms
- * except that the holder is Tim Hudson (tjh@cryptsoft.com).
- * 
- * Copyright remains Eric Young's, and as such any Copyright notices in
- * the code are not to be removed.
- * If this package is used in a product, Eric Young should be given attribution
- * as the author of the parts of the library used.
- * This can be in the form of a textual message at program startup or
- * in documentation (online or textual) provided with the package.
- * 
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions
- * are met:
- * 1. Redistributions of source code must retain the copyright
- *    notice, this list of conditions and the following disclaimer.
- * 2. Redistributions in binary form must reproduce the above copyright
- *    notice, this list of conditions and the following disclaimer in the
- *    documentation and/or other materials provided with the distribution.
- * 3. All advertising materials mentioning features or use of this software
- *    must display the following acknowledgement:
- *    "This product includes cryptographic software written by
- *     Eric Young (eay@cryptsoft.com)"
- *    The word 'cryptographic' can be left out if the rouines from the library
- *    being used are not cryptographic related :-).
- * 4. If you include any Windows specific code (or a derivative thereof) from 
- *    the apps directory (application code) you must include an acknowledgement:
- *    "This product includes software written by Tim Hudson (tjh@cryptsoft.com)"
- * 
- * THIS SOFTWARE IS PROVIDED BY ERIC YOUNG ``AS IS'' AND
- * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
- * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
- * ARE DISCLAIMED.  IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE
- * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
- * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
- * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
- * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
- * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
- * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
- * SUCH DAMAGE.
- * 
- * The licence and distribution terms for any publically available version or
- * derivative of this code cannot be changed.  i.e. this code cannot simply be
- * copied and put under another distribution licence
- * [including the GNU Public Licence.]
- */
-
-#ifndef HEADER_OBJECTS_H
-#define HEADER_OBJECTS_H
-
-#define USE_OBJ_MAC
-
-#ifdef USE_OBJ_MAC
-#include <openssl/obj_mac.h>
-#else
-#define SN_undef			"UNDEF"
-#define LN_undef			"undefined"
-#define NID_undef			0
-#define OBJ_undef			0L
-
-#define SN_Algorithm			"Algorithm"
-#define LN_algorithm			"algorithm"
-#define NID_algorithm			38
-#define OBJ_algorithm			1L,3L,14L,3L,2L
-
-#define LN_rsadsi			"rsadsi"
-#define NID_rsadsi			1
-#define OBJ_rsadsi			1L,2L,840L,113549L
-
-#define LN_pkcs				"pkcs"
-#define NID_pkcs			2
-#define OBJ_pkcs			OBJ_rsadsi,1L
-
-#define SN_md2				"MD2"
-#define LN_md2				"md2"
-#define NID_md2				3
-#define OBJ_md2				OBJ_rsadsi,2L,2L
-
-#define SN_md5				"MD5"
-#define LN_md5				"md5"
-#define NID_md5				4
-#define OBJ_md5				OBJ_rsadsi,2L,5L
-
-#define SN_rc4				"RC4"
-#define LN_rc4				"rc4"
-#define NID_rc4				5
-#define OBJ_rc4				OBJ_rsadsi,3L,4L
-
-#define LN_rsaEncryption		"rsaEncryption"
-#define NID_rsaEncryption		6
-#define OBJ_rsaEncryption		OBJ_pkcs,1L,1L
-
-#define SN_md2WithRSAEncryption		"RSA-MD2"
-#define LN_md2WithRSAEncryption		"md2WithRSAEncryption"
-#define NID_md2WithRSAEncryption	7
-#define OBJ_md2WithRSAEncryption	OBJ_pkcs,1L,2L
-
-#define SN_md5WithRSAEncryption		"RSA-MD5"
-#define LN_md5WithRSAEncryption		"md5WithRSAEncryption"
-#define NID_md5WithRSAEncryption	8
-#define OBJ_md5WithRSAEncryption	OBJ_pkcs,1L,4L
-
-#define SN_pbeWithMD2AndDES_CBC		"PBE-MD2-DES"
-#define LN_pbeWithMD2AndDES_CBC		"pbeWithMD2AndDES-CBC"
-#define NID_pbeWithMD2AndDES_CBC	9
-#define OBJ_pbeWithMD2AndDES_CBC	OBJ_pkcs,5L,1L
-
-#define SN_pbeWithMD5AndDES_CBC		"PBE-MD5-DES"
-#define LN_pbeWithMD5AndDES_CBC		"pbeWithMD5AndDES-CBC"
-#define NID_pbeWithMD5AndDES_CBC	10
-#define OBJ_pbeWithMD5AndDES_CBC	OBJ_pkcs,5L,3L
-
-#define LN_X500				"X500"
-#define NID_X500			11
-#define OBJ_X500			2L,5L
-
-#define LN_X509				"X509"
-#define NID_X509			12
-#define OBJ_X509			OBJ_X500,4L
-
-#define SN_commonName			"CN"
-#define LN_commonName			"commonName"
-#define NID_commonName			13
-#define OBJ_commonName			OBJ_X509,3L
-
-#define SN_countryName			"C"
-#define LN_countryName			"countryName"
-#define NID_countryName			14
-#define OBJ_countryName			OBJ_X509,6L
-
-#define SN_localityName			"L"
-#define LN_localityName			"localityName"
-#define NID_localityName		15
-#define OBJ_localityName		OBJ_X509,7L
-
-/* Postal Address? PA */
-
-/* should be "ST" (rfc1327) but MS uses 'S' */
-#define SN_stateOrProvinceName		"ST"
-#define LN_stateOrProvinceName		"stateOrProvinceName"
-#define NID_stateOrProvinceName		16
-#define OBJ_stateOrProvinceName		OBJ_X509,8L
-
-#define SN_organizationName		"O"
-#define LN_organizationName		"organizationName"
-#define NID_organizationName		17
-#define OBJ_organizationName		OBJ_X509,10L
-
-#define SN_organizationalUnitName	"OU"
-#define LN_organizationalUnitName	"organizationalUnitName"
-#define NID_organizationalUnitName	18
-#define OBJ_organizationalUnitName	OBJ_X509,11L
-
-#define SN_rsa				"RSA"
-#define LN_rsa				"rsa"
-#define NID_rsa				19
-#define OBJ_rsa				OBJ_X500,8L,1L,1L
-
-#define LN_pkcs7			"pkcs7"
-#define NID_pkcs7			20
-#define OBJ_pkcs7			OBJ_pkcs,7L
-
-#define LN_pkcs7_data			"pkcs7-data"
-#define NID_pkcs7_data			21
-#define OBJ_pkcs7_data			OBJ_pkcs7,1L
-
-#define LN_pkcs7_signed			"pkcs7-signedData"
-#define NID_pkcs7_signed		22
-#define OBJ_pkcs7_signed		OBJ_pkcs7,2L
-
-#define LN_pkcs7_enveloped		"pkcs7-envelopedData"
-#define NID_pkcs7_enveloped		23
-#define OBJ_pkcs7_enveloped		OBJ_pkcs7,3L
-
-#define LN_pkcs7_signedAndEnveloped	"pkcs7-signedAndEnvelopedData"
-#define NID_pkcs7_signedAndEnveloped	24
-#define OBJ_pkcs7_signedAndEnveloped	OBJ_pkcs7,4L
-
-#define LN_pkcs7_digest			"pkcs7-digestData"
-#define NID_pkcs7_digest		25
-#define OBJ_pkcs7_digest		OBJ_pkcs7,5L
-
-#define LN_pkcs7_encrypted		"pkcs7-encryptedData"
-#define NID_pkcs7_encrypted		26
-#define OBJ_pkcs7_encrypted		OBJ_pkcs7,6L
-
-#define LN_pkcs3			"pkcs3"
-#define NID_pkcs3			27
-#define OBJ_pkcs3			OBJ_pkcs,3L
-
-#define LN_dhKeyAgreement		"dhKeyAgreement"
-#define NID_dhKeyAgreement		28
-#define OBJ_dhKeyAgreement		OBJ_pkcs3,1L
-
-#define SN_des_ecb			"DES-ECB"
-#define LN_des_ecb			"des-ecb"
-#define NID_des_ecb			29
-#define OBJ_des_ecb			OBJ_algorithm,6L
-
-#define SN_des_cfb64			"DES-CFB"
-#define LN_des_cfb64			"des-cfb"
-#define NID_des_cfb64			30
-/* IV + num */
-#define OBJ_des_cfb64			OBJ_algorithm,9L
-
-#define SN_des_cbc			"DES-CBC"
-#define LN_des_cbc			"des-cbc"
-#define NID_des_cbc			31
-/* IV */
-#define OBJ_des_cbc			OBJ_algorithm,7L
-
-#define SN_des_ede			"DES-EDE"
-#define LN_des_ede			"des-ede"
-#define NID_des_ede			32
-/* ?? */
-#define OBJ_des_ede			OBJ_algorithm,17L
-
-#define SN_des_ede3			"DES-EDE3"
-#define LN_des_ede3			"des-ede3"
-#define NID_des_ede3			33
-
-#define SN_idea_cbc			"IDEA-CBC"
-#define LN_idea_cbc			"idea-cbc"
-#define NID_idea_cbc			34
-#define OBJ_idea_cbc			1L,3L,6L,1L,4L,1L,188L,7L,1L,1L,2L
-
-#define SN_idea_cfb64			"IDEA-CFB"
-#define LN_idea_cfb64			"idea-cfb"
-#define NID_idea_cfb64			35
-
-#define SN_idea_ecb			"IDEA-ECB"
-#define LN_idea_ecb			"idea-ecb"
-#define NID_idea_ecb			36
-
-#define SN_rc2_cbc			"RC2-CBC"
-#define LN_rc2_cbc			"rc2-cbc"
-#define NID_rc2_cbc			37
-#define OBJ_rc2_cbc			OBJ_rsadsi,3L,2L
-
-#define SN_rc2_ecb			"RC2-ECB"
-#define LN_rc2_ecb			"rc2-ecb"
-#define NID_rc2_ecb			38
-
-#define SN_rc2_cfb64			"RC2-CFB"
-#define LN_rc2_cfb64			"rc2-cfb"
-#define NID_rc2_cfb64			39
-
-#define SN_rc2_ofb64			"RC2-OFB"
-#define LN_rc2_ofb64			"rc2-ofb"
-#define NID_rc2_ofb64			40
-
-#define SN_sha				"SHA"
-#define LN_sha				"sha"
-#define NID_sha				41
-#define OBJ_sha				OBJ_algorithm,18L
-
-#define SN_shaWithRSAEncryption		"RSA-SHA"
-#define LN_shaWithRSAEncryption		"shaWithRSAEncryption"
-#define NID_shaWithRSAEncryption	42
-#define OBJ_shaWithRSAEncryption	OBJ_algorithm,15L
-
-#define SN_des_ede_cbc			"DES-EDE-CBC"
-#define LN_des_ede_cbc			"des-ede-cbc"
-#define NID_des_ede_cbc			43
-
-#define SN_des_ede3_cbc			"DES-EDE3-CBC"
-#define LN_des_ede3_cbc			"des-ede3-cbc"
-#define NID_des_ede3_cbc		44
-#define OBJ_des_ede3_cbc		OBJ_rsadsi,3L,7L
-
-#define SN_des_ofb64			"DES-OFB"
-#define LN_des_ofb64			"des-ofb"
-#define NID_des_ofb64			45
-#define OBJ_des_ofb64			OBJ_algorithm,8L
-
-#define SN_idea_ofb64			"IDEA-OFB"
-#define LN_idea_ofb64			"idea-ofb"
-#define NID_idea_ofb64			46
-
-#define LN_pkcs9			"pkcs9"
-#define NID_pkcs9			47
-#define OBJ_pkcs9			OBJ_pkcs,9L
-
-#define SN_pkcs9_emailAddress		"Email"
-#define LN_pkcs9_emailAddress		"emailAddress"
-#define NID_pkcs9_emailAddress		48
-#define OBJ_pkcs9_emailAddress		OBJ_pkcs9,1L
-
-#define LN_pkcs9_unstructuredName	"unstructuredName"
-#define NID_pkcs9_unstructuredName	49
-#define OBJ_pkcs9_unstructuredName	OBJ_pkcs9,2L
-
-#define LN_pkcs9_contentType		"contentType"
-#define NID_pkcs9_contentType		50
-#define OBJ_pkcs9_contentType		OBJ_pkcs9,3L
-
-#define LN_pkcs9_messageDigest		"messageDigest"
-#define NID_pkcs9_messageDigest		51
-#define OBJ_pkcs9_messageDigest		OBJ_pkcs9,4L
-
-#define LN_pkcs9_signingTime		"signingTime"
-#define NID_pkcs9_signingTime		52
-#define OBJ_pkcs9_signingTime		OBJ_pkcs9,5L
-
-#define LN_pkcs9_countersignature	"countersignature"
-#define NID_pkcs9_countersignature	53
-#define OBJ_pkcs9_countersignature	OBJ_pkcs9,6L
-
-#define LN_pkcs9_challengePassword	"challengePassword"
-#define NID_pkcs9_challengePassword	54
-#define OBJ_pkcs9_challengePassword	OBJ_pkcs9,7L
-
-#define LN_pkcs9_unstructuredAddress	"unstructuredAddress"
-#define NID_pkcs9_unstructuredAddress	55
-#define OBJ_pkcs9_unstructuredAddress	OBJ_pkcs9,8L
-
-#define LN_pkcs9_extCertAttributes	"extendedCertificateAttributes"
-#define NID_pkcs9_extCertAttributes	56
-#define OBJ_pkcs9_extCertAttributes	OBJ_pkcs9,9L
-
-#define SN_netscape			"Netscape"
-#define LN_netscape			"Netscape Communications Corp."
-#define NID_netscape			57
-#define OBJ_netscape			2L,16L,840L,1L,113730L
-
-#define SN_netscape_cert_extension	"nsCertExt"
-#define LN_netscape_cert_extension	"Netscape Certificate Extension"
-#define NID_netscape_cert_extension	58
-#define OBJ_netscape_cert_extension	OBJ_netscape,1L
-
-#define SN_netscape_data_type		"nsDataType"
-#define LN_netscape_data_type		"Netscape Data Type"
-#define NID_netscape_data_type		59
-#define OBJ_netscape_data_type		OBJ_netscape,2L
-
-#define SN_des_ede_cfb64		"DES-EDE-CFB"
-#define LN_des_ede_cfb64		"des-ede-cfb"
-#define NID_des_ede_cfb64		60
-
-#define SN_des_ede3_cfb64		"DES-EDE3-CFB"
-#define LN_des_ede3_cfb64		"des-ede3-cfb"
-#define NID_des_ede3_cfb64		61
-
-#define SN_des_ede_ofb64		"DES-EDE-OFB"
-#define LN_des_ede_ofb64		"des-ede-ofb"
-#define NID_des_ede_ofb64		62
-
-#define SN_des_ede3_ofb64		"DES-EDE3-OFB"
-#define LN_des_ede3_ofb64		"des-ede3-ofb"
-#define NID_des_ede3_ofb64		63
-
-/* I'm not sure about the object ID */
-#define SN_sha1				"SHA1"
-#define LN_sha1				"sha1"
-#define NID_sha1			64
-#define OBJ_sha1			OBJ_algorithm,26L
-/* 28 Jun 1996 - eay */
-/* #define OBJ_sha1			1L,3L,14L,2L,26L,05L <- wrong */
-
-#define SN_sha1WithRSAEncryption	"RSA-SHA1"
-#define LN_sha1WithRSAEncryption	"sha1WithRSAEncryption"
-#define NID_sha1WithRSAEncryption	65
-#define OBJ_sha1WithRSAEncryption	OBJ_pkcs,1L,5L
-
-#define SN_dsaWithSHA			"DSA-SHA"
-#define LN_dsaWithSHA			"dsaWithSHA"
-#define NID_dsaWithSHA			66
-#define OBJ_dsaWithSHA			OBJ_algorithm,13L
-
-#define SN_dsa_2			"DSA-old"
-#define LN_dsa_2			"dsaEncryption-old"
-#define NID_dsa_2			67
-#define OBJ_dsa_2			OBJ_algorithm,12L
-
-/* proposed by microsoft to RSA */
-#define SN_pbeWithSHA1AndRC2_CBC	"PBE-SHA1-RC2-64"
-#define LN_pbeWithSHA1AndRC2_CBC	"pbeWithSHA1AndRC2-CBC"
-#define NID_pbeWithSHA1AndRC2_CBC	68
-#define OBJ_pbeWithSHA1AndRC2_CBC	OBJ_pkcs,5L,11L 
-
-/* proposed by microsoft to RSA as pbeWithSHA1AndRC4: it is now
- * defined explicitly in PKCS#5 v2.0 as id-PBKDF2 which is something
- * completely different.
- */
-#define LN_id_pbkdf2			"PBKDF2"
-#define NID_id_pbkdf2			69
-#define OBJ_id_pbkdf2			OBJ_pkcs,5L,12L 
-
-#define SN_dsaWithSHA1_2		"DSA-SHA1-old"
-#define LN_dsaWithSHA1_2		"dsaWithSHA1-old"
-#define NID_dsaWithSHA1_2		70
-/* Got this one from 'sdn706r20.pdf' which is actually an NSA document :-) */
-#define OBJ_dsaWithSHA1_2		OBJ_algorithm,27L
-
-#define SN_netscape_cert_type		"nsCertType"
-#define LN_netscape_cert_type		"Netscape Cert Type"
-#define NID_netscape_cert_type		71
-#define OBJ_netscape_cert_type		OBJ_netscape_cert_extension,1L
-
-#define SN_netscape_base_url		"nsBaseUrl"
-#define LN_netscape_base_url		"Netscape Base Url"
-#define NID_netscape_base_url		72
-#define OBJ_netscape_base_url		OBJ_netscape_cert_extension,2L
-
-#define SN_netscape_revocation_url	"nsRevocationUrl"
-#define LN_netscape_revocation_url	"Netscape Revocation Url"
-#define NID_netscape_revocation_url	73
-#define OBJ_netscape_revocation_url	OBJ_netscape_cert_extension,3L
-
-#define SN_netscape_ca_revocation_url	"nsCaRevocationUrl"
-#define LN_netscape_ca_revocation_url	"Netscape CA Revocation Url"
-#define NID_netscape_ca_revocation_url	74
-#define OBJ_netscape_ca_revocation_url	OBJ_netscape_cert_extension,4L
-
-#define SN_netscape_renewal_url		"nsRenewalUrl"
-#define LN_netscape_renewal_url		"Netscape Renewal Url"
-#define NID_netscape_renewal_url	75
-#define OBJ_netscape_renewal_url	OBJ_netscape_cert_extension,7L
-
-#define SN_netscape_ca_policy_url	"nsCaPolicyUrl"
-#define LN_netscape_ca_policy_url	"Netscape CA Policy Url"
-#define NID_netscape_ca_policy_url	76
-#define OBJ_netscape_ca_policy_url	OBJ_netscape_cert_extension,8L
-
-#define SN_netscape_ssl_server_name	"nsSslServerName"
-#define LN_netscape_ssl_server_name	"Netscape SSL Server Name"
-#define NID_netscape_ssl_server_name	77
-#define OBJ_netscape_ssl_server_name	OBJ_netscape_cert_extension,12L
-
-#define SN_netscape_comment		"nsComment"
-#define LN_netscape_comment		"Netscape Comment"
-#define NID_netscape_comment		78
-#define OBJ_netscape_comment		OBJ_netscape_cert_extension,13L
-
-#define SN_netscape_cert_sequence	"nsCertSequence"
-#define LN_netscape_cert_sequence	"Netscape Certificate Sequence"
-#define NID_netscape_cert_sequence	79
-#define OBJ_netscape_cert_sequence	OBJ_netscape_data_type,5L
-
-#define SN_desx_cbc			"DESX-CBC"
-#define LN_desx_cbc			"desx-cbc"
-#define NID_desx_cbc			80
-
-#define SN_id_ce			"id-ce"
-#define NID_id_ce			81
-#define OBJ_id_ce			2L,5L,29L
-
-#define SN_subject_key_identifier	"subjectKeyIdentifier"
-#define LN_subject_key_identifier	"X509v3 Subject Key Identifier"
-#define NID_subject_key_identifier	82
-#define OBJ_subject_key_identifier	OBJ_id_ce,14L
-
-#define SN_key_usage			"keyUsage"
-#define LN_key_usage			"X509v3 Key Usage"
-#define NID_key_usage			83
-#define OBJ_key_usage			OBJ_id_ce,15L
-
-#define SN_private_key_usage_period	"privateKeyUsagePeriod"
-#define LN_private_key_usage_period	"X509v3 Private Key Usage Period"
-#define NID_private_key_usage_period	84
-#define OBJ_private_key_usage_period	OBJ_id_ce,16L
-
-#define SN_subject_alt_name		"subjectAltName"
-#define LN_subject_alt_name		"X509v3 Subject Alternative Name"
-#define NID_subject_alt_name		85
-#define OBJ_subject_alt_name		OBJ_id_ce,17L
-
-#define SN_issuer_alt_name		"issuerAltName"
-#define LN_issuer_alt_name		"X509v3 Issuer Alternative Name"
-#define NID_issuer_alt_name		86
-#define OBJ_issuer_alt_name		OBJ_id_ce,18L
-
-#define SN_basic_constraints		"basicConstraints"
-#define LN_basic_constraints		"X509v3 Basic Constraints"
-#define NID_basic_constraints		87
-#define OBJ_basic_constraints		OBJ_id_ce,19L
-
-#define SN_crl_number			"crlNumber"
-#define LN_crl_number			"X509v3 CRL Number"
-#define NID_crl_number			88
-#define OBJ_crl_number			OBJ_id_ce,20L
-
-#define SN_certificate_policies		"certificatePolicies"
-#define LN_certificate_policies		"X509v3 Certificate Policies"
-#define NID_certificate_policies	89
-#define OBJ_certificate_policies	OBJ_id_ce,32L
-
-#define SN_authority_key_identifier	"authorityKeyIdentifier"
-#define LN_authority_key_identifier	"X509v3 Authority Key Identifier"
-#define NID_authority_key_identifier	90
-#define OBJ_authority_key_identifier	OBJ_id_ce,35L
-
-#define SN_bf_cbc			"BF-CBC"
-#define LN_bf_cbc			"bf-cbc"
-#define NID_bf_cbc			91
-#define OBJ_bf_cbc			1L,3L,6L,1L,4L,1L,3029L,1L,2L
-
-#define SN_bf_ecb			"BF-ECB"
-#define LN_bf_ecb			"bf-ecb"
-#define NID_bf_ecb			92
-
-#define SN_bf_cfb64			"BF-CFB"
-#define LN_bf_cfb64			"bf-cfb"
-#define NID_bf_cfb64			93
-
-#define SN_bf_ofb64			"BF-OFB"
-#define LN_bf_ofb64			"bf-ofb"
-#define NID_bf_ofb64			94
-
-#define SN_mdc2				"MDC2"
-#define LN_mdc2				"mdc2"
-#define NID_mdc2			95
-#define OBJ_mdc2			2L,5L,8L,3L,101L
-/* An alternative?			1L,3L,14L,3L,2L,19L */
-
-#define SN_mdc2WithRSA			"RSA-MDC2"
-#define LN_mdc2WithRSA			"mdc2withRSA"
-#define NID_mdc2WithRSA			96
-#define OBJ_mdc2WithRSA			2L,5L,8L,3L,100L
-
-#define SN_rc4_40			"RC4-40"
-#define LN_rc4_40			"rc4-40"
-#define NID_rc4_40			97
-
-#define SN_rc2_40_cbc			"RC2-40-CBC"
-#define LN_rc2_40_cbc			"rc2-40-cbc"
-#define NID_rc2_40_cbc			98
-
-#define SN_givenName			"G"
-#define LN_givenName			"givenName"
-#define NID_givenName			99
-#define OBJ_givenName			OBJ_X509,42L
-
-#define SN_surname			"S"
-#define LN_surname			"surname"
-#define NID_surname			100
-#define OBJ_surname			OBJ_X509,4L
-
-#define SN_initials			"I"
-#define LN_initials			"initials"
-#define NID_initials			101
-#define OBJ_initials			OBJ_X509,43L
-
-#define SN_uniqueIdentifier		"UID"
-#define LN_uniqueIdentifier		"uniqueIdentifier"
-#define NID_uniqueIdentifier		102
-#define OBJ_uniqueIdentifier		OBJ_X509,45L
-
-#define SN_crl_distribution_points	"crlDistributionPoints"
-#define LN_crl_distribution_points	"X509v3 CRL Distribution Points"
-#define NID_crl_distribution_points	103
-#define OBJ_crl_distribution_points	OBJ_id_ce,31L
-
-#define SN_md5WithRSA			"RSA-NP-MD5"
-#define LN_md5WithRSA			"md5WithRSA"
-#define NID_md5WithRSA			104
-#define OBJ_md5WithRSA			OBJ_algorithm,3L
-
-#define SN_serialNumber			"SN"
-#define LN_serialNumber			"serialNumber"
-#define NID_serialNumber		105
-#define OBJ_serialNumber		OBJ_X509,5L
-
-#define SN_title			"T"
-#define LN_title			"title"
-#define NID_title			106
-#define OBJ_title			OBJ_X509,12L
-
-#define SN_description			"D"
-#define LN_description			"description"
-#define NID_description			107
-#define OBJ_description			OBJ_X509,13L
-
-/* CAST5 is CAST-128, I'm just sticking with the documentation */
-#define SN_cast5_cbc			"CAST5-CBC"
-#define LN_cast5_cbc			"cast5-cbc"
-#define NID_cast5_cbc			108
-#define OBJ_cast5_cbc			1L,2L,840L,113533L,7L,66L,10L
-
-#define SN_cast5_ecb			"CAST5-ECB"
-#define LN_cast5_ecb			"cast5-ecb"
-#define NID_cast5_ecb			109
-
-#define SN_cast5_cfb64			"CAST5-CFB"
-#define LN_cast5_cfb64			"cast5-cfb"
-#define NID_cast5_cfb64			110
-
-#define SN_cast5_ofb64			"CAST5-OFB"
-#define LN_cast5_ofb64			"cast5-ofb"
-#define NID_cast5_ofb64			111
-
-#define LN_pbeWithMD5AndCast5_CBC	"pbeWithMD5AndCast5CBC"
-#define NID_pbeWithMD5AndCast5_CBC	112
-#define OBJ_pbeWithMD5AndCast5_CBC	1L,2L,840L,113533L,7L,66L,12L
-
-/* This is one sun will soon be using :-(
- * id-dsa-with-sha1 ID  ::= {
- *   iso(1) member-body(2) us(840) x9-57 (10040) x9cm(4) 3 }
- */
-#define SN_dsaWithSHA1			"DSA-SHA1"
-#define LN_dsaWithSHA1			"dsaWithSHA1"
-#define NID_dsaWithSHA1			113
-#define OBJ_dsaWithSHA1			1L,2L,840L,10040L,4L,3L
-
-#define NID_md5_sha1			114
-#define SN_md5_sha1			"MD5-SHA1"
-#define LN_md5_sha1			"md5-sha1"
-
-#define SN_sha1WithRSA			"RSA-SHA1-2"
-#define LN_sha1WithRSA			"sha1WithRSA"
-#define NID_sha1WithRSA			115
-#define OBJ_sha1WithRSA			OBJ_algorithm,29L
-
-#define SN_dsa				"DSA"
-#define LN_dsa				"dsaEncryption"
-#define NID_dsa				116
-#define OBJ_dsa				1L,2L,840L,10040L,4L,1L
-
-#define SN_ripemd160			"RIPEMD160"
-#define LN_ripemd160			"ripemd160"
-#define NID_ripemd160			117
-#define OBJ_ripemd160			1L,3L,36L,3L,2L,1L
-
-/* The name should actually be rsaSignatureWithripemd160, but I'm going
- * to continue using the convention I'm using with the other ciphers */
-#define SN_ripemd160WithRSA		"RSA-RIPEMD160"
-#define LN_ripemd160WithRSA		"ripemd160WithRSA"
-#define NID_ripemd160WithRSA		119
-#define OBJ_ripemd160WithRSA		1L,3L,36L,3L,3L,1L,2L
-
-/* Taken from rfc2040
- *  RC5_CBC_Parameters ::= SEQUENCE {
- *	version           INTEGER (v1_0(16)),
- *	rounds            INTEGER (8..127),
- *	blockSizeInBits   INTEGER (64, 128),
- *	iv                OCTET STRING OPTIONAL
- *	}
- */
-#define SN_rc5_cbc			"RC5-CBC"
-#define LN_rc5_cbc			"rc5-cbc"
-#define NID_rc5_cbc			120
-#define OBJ_rc5_cbc			OBJ_rsadsi,3L,8L
-
-#define SN_rc5_ecb			"RC5-ECB"
-#define LN_rc5_ecb			"rc5-ecb"
-#define NID_rc5_ecb			121
-
-#define SN_rc5_cfb64			"RC5-CFB"
-#define LN_rc5_cfb64			"rc5-cfb"
-#define NID_rc5_cfb64			122
-
-#define SN_rc5_ofb64			"RC5-OFB"
-#define LN_rc5_ofb64			"rc5-ofb"
-#define NID_rc5_ofb64			123
-
-#define SN_rle_compression		"RLE"
-#define LN_rle_compression		"run length compression"
-#define NID_rle_compression		124
-#define OBJ_rle_compression		1L,1L,1L,1L,666L,1L
-
-#define SN_zlib_compression		"ZLIB"
-#define LN_zlib_compression		"zlib compression"
-#define NID_zlib_compression		125
-#define OBJ_zlib_compression		1L,1L,1L,1L,666L,2L
-
-#define SN_ext_key_usage		"extendedKeyUsage"
-#define LN_ext_key_usage		"X509v3 Extended Key Usage"
-#define NID_ext_key_usage		126
-#define OBJ_ext_key_usage		OBJ_id_ce,37
-
-#define SN_id_pkix			"PKIX"
-#define NID_id_pkix			127
-#define OBJ_id_pkix			1L,3L,6L,1L,5L,5L,7L
-
-#define SN_id_kp			"id-kp"
-#define NID_id_kp			128
-#define OBJ_id_kp			OBJ_id_pkix,3L
-
-/* PKIX extended key usage OIDs */
-
-#define SN_server_auth			"serverAuth"
-#define LN_server_auth			"TLS Web Server Authentication"
-#define NID_server_auth			129
-#define OBJ_server_auth			OBJ_id_kp,1L
-
-#define SN_client_auth			"clientAuth"
-#define LN_client_auth			"TLS Web Client Authentication"
-#define NID_client_auth			130
-#define OBJ_client_auth			OBJ_id_kp,2L
-
-#define SN_code_sign			"codeSigning"
-#define LN_code_sign			"Code Signing"
-#define NID_code_sign			131
-#define OBJ_code_sign			OBJ_id_kp,3L
-
-#define SN_email_protect		"emailProtection"
-#define LN_email_protect		"E-mail Protection"
-#define NID_email_protect		132
-#define OBJ_email_protect		OBJ_id_kp,4L
-
-#define SN_time_stamp			"timeStamping"
-#define LN_time_stamp			"Time Stamping"
-#define NID_time_stamp			133
-#define OBJ_time_stamp			OBJ_id_kp,8L
-
-/* Additional extended key usage OIDs: Microsoft */
-
-#define SN_ms_code_ind			"msCodeInd"
-#define LN_ms_code_ind			"Microsoft Individual Code Signing"
-#define NID_ms_code_ind			134
-#define OBJ_ms_code_ind			1L,3L,6L,1L,4L,1L,311L,2L,1L,21L
-
-#define SN_ms_code_com			"msCodeCom"
-#define LN_ms_code_com			"Microsoft Commercial Code Signing"
-#define NID_ms_code_com			135
-#define OBJ_ms_code_com			1L,3L,6L,1L,4L,1L,311L,2L,1L,22L
-
-#define SN_ms_ctl_sign			"msCTLSign"
-#define LN_ms_ctl_sign			"Microsoft Trust List Signing"
-#define NID_ms_ctl_sign			136
-#define OBJ_ms_ctl_sign			1L,3L,6L,1L,4L,1L,311L,10L,3L,1L
-
-#define SN_ms_sgc			"msSGC"
-#define LN_ms_sgc			"Microsoft Server Gated Crypto"
-#define NID_ms_sgc			137
-#define OBJ_ms_sgc			1L,3L,6L,1L,4L,1L,311L,10L,3L,3L
-
-#define SN_ms_efs			"msEFS"
-#define LN_ms_efs			"Microsoft Encrypted File System"
-#define NID_ms_efs			138
-#define OBJ_ms_efs			1L,3L,6L,1L,4L,1L,311L,10L,3L,4L
-
-/* Additional usage: Netscape */
-
-#define SN_ns_sgc			"nsSGC"
-#define LN_ns_sgc			"Netscape Server Gated Crypto"
-#define NID_ns_sgc			139
-#define OBJ_ns_sgc			OBJ_netscape,4L,1L
-
-#define SN_delta_crl			"deltaCRL"
-#define LN_delta_crl			"X509v3 Delta CRL Indicator"
-#define NID_delta_crl			140
-#define OBJ_delta_crl			OBJ_id_ce,27L
-
-#define SN_crl_reason			"CRLReason"
-#define LN_crl_reason			"CRL Reason Code"
-#define NID_crl_reason			141
-#define OBJ_crl_reason			OBJ_id_ce,21L
-
-#define SN_invalidity_date		"invalidityDate"
-#define LN_invalidity_date		"Invalidity Date"
-#define NID_invalidity_date		142
-#define OBJ_invalidity_date		OBJ_id_ce,24L
-
-#define SN_sxnet			"SXNetID"
-#define LN_sxnet			"Strong Extranet ID"
-#define NID_sxnet			143
-#define OBJ_sxnet			1L,3L,101L,1L,4L,1L
-
-/* PKCS12 and related OBJECT IDENTIFIERS */
-
-#define OBJ_pkcs12			OBJ_pkcs,12L
-#define OBJ_pkcs12_pbeids		OBJ_pkcs12, 1
-
-#define SN_pbe_WithSHA1And128BitRC4	"PBE-SHA1-RC4-128"
-#define LN_pbe_WithSHA1And128BitRC4	"pbeWithSHA1And128BitRC4"
-#define NID_pbe_WithSHA1And128BitRC4	144
-#define OBJ_pbe_WithSHA1And128BitRC4	OBJ_pkcs12_pbeids, 1L
-
-#define SN_pbe_WithSHA1And40BitRC4	"PBE-SHA1-RC4-40"
-#define LN_pbe_WithSHA1And40BitRC4	"pbeWithSHA1And40BitRC4"
-#define NID_pbe_WithSHA1And40BitRC4	145
-#define OBJ_pbe_WithSHA1And40BitRC4	OBJ_pkcs12_pbeids, 2L
-
-#define SN_pbe_WithSHA1And3_Key_TripleDES_CBC	"PBE-SHA1-3DES"
-#define LN_pbe_WithSHA1And3_Key_TripleDES_CBC	"pbeWithSHA1And3-KeyTripleDES-CBC"
-#define NID_pbe_WithSHA1And3_Key_TripleDES_CBC	146
-#define OBJ_pbe_WithSHA1And3_Key_TripleDES_CBC	OBJ_pkcs12_pbeids, 3L
-
-#define SN_pbe_WithSHA1And2_Key_TripleDES_CBC	"PBE-SHA1-2DES"
-#define LN_pbe_WithSHA1And2_Key_TripleDES_CBC	"pbeWithSHA1And2-KeyTripleDES-CBC"
-#define NID_pbe_WithSHA1And2_Key_TripleDES_CBC	147
-#define OBJ_pbe_WithSHA1And2_Key_TripleDES_CBC	OBJ_pkcs12_pbeids, 4L
-
-#define SN_pbe_WithSHA1And128BitRC2_CBC		"PBE-SHA1-RC2-128"
-#define LN_pbe_WithSHA1And128BitRC2_CBC		"pbeWithSHA1And128BitRC2-CBC"
-#define NID_pbe_WithSHA1And128BitRC2_CBC	148
-#define OBJ_pbe_WithSHA1And128BitRC2_CBC	OBJ_pkcs12_pbeids, 5L
-
-#define SN_pbe_WithSHA1And40BitRC2_CBC	"PBE-SHA1-RC2-40"
-#define LN_pbe_WithSHA1And40BitRC2_CBC	"pbeWithSHA1And40BitRC2-CBC"
-#define NID_pbe_WithSHA1And40BitRC2_CBC	149
-#define OBJ_pbe_WithSHA1And40BitRC2_CBC	OBJ_pkcs12_pbeids, 6L
-
-#define OBJ_pkcs12_Version1	OBJ_pkcs12, 10L
-
-#define OBJ_pkcs12_BagIds	OBJ_pkcs12_Version1, 1L
-
-#define LN_keyBag		"keyBag"
-#define NID_keyBag		150
-#define OBJ_keyBag		OBJ_pkcs12_BagIds, 1L
-
-#define LN_pkcs8ShroudedKeyBag	"pkcs8ShroudedKeyBag"
-#define NID_pkcs8ShroudedKeyBag	151
-#define OBJ_pkcs8ShroudedKeyBag	OBJ_pkcs12_BagIds, 2L
-
-#define LN_certBag		"certBag"
-#define NID_certBag		152
-#define OBJ_certBag		OBJ_pkcs12_BagIds, 3L
-
-#define LN_crlBag		"crlBag"
-#define NID_crlBag		153
-#define OBJ_crlBag		OBJ_pkcs12_BagIds, 4L
-
-#define LN_secretBag		"secretBag"
-#define NID_secretBag		154
-#define OBJ_secretBag		OBJ_pkcs12_BagIds, 5L
-
-#define LN_safeContentsBag	"safeContentsBag"
-#define NID_safeContentsBag	155
-#define OBJ_safeContentsBag	OBJ_pkcs12_BagIds, 6L
-
-#define LN_friendlyName		"friendlyName"
-#define	NID_friendlyName	156
-#define OBJ_friendlyName	OBJ_pkcs9, 20L
-
-#define LN_localKeyID		"localKeyID"
-#define	NID_localKeyID		157
-#define OBJ_localKeyID		OBJ_pkcs9, 21L
-
-#define OBJ_certTypes		OBJ_pkcs9, 22L
-
-#define LN_x509Certificate	"x509Certificate"
-#define	NID_x509Certificate	158
-#define OBJ_x509Certificate	OBJ_certTypes, 1L
-
-#define LN_sdsiCertificate	"sdsiCertificate"
-#define	NID_sdsiCertificate	159
-#define OBJ_sdsiCertificate	OBJ_certTypes, 2L
-
-#define OBJ_crlTypes		OBJ_pkcs9, 23L
-
-#define LN_x509Crl		"x509Crl"
-#define	NID_x509Crl		160
-#define OBJ_x509Crl		OBJ_crlTypes, 1L
-
-/* PKCS#5 v2 OIDs */
-
-#define LN_pbes2		"PBES2"
-#define NID_pbes2		161
-#define OBJ_pbes2		OBJ_pkcs,5L,13L
-
-#define LN_pbmac1		"PBMAC1"
-#define NID_pbmac1		162
-#define OBJ_pbmac1		OBJ_pkcs,5L,14L
-
-#define LN_hmacWithSHA1		"hmacWithSHA1"
-#define NID_hmacWithSHA1	163
-#define OBJ_hmacWithSHA1	OBJ_rsadsi,2L,7L
-
-/* Policy Qualifier Ids */
-
-#define LN_id_qt_cps		"Policy Qualifier CPS"
-#define SN_id_qt_cps		"id-qt-cps"
-#define NID_id_qt_cps		164
-#define OBJ_id_qt_cps		OBJ_id_pkix,2L,1L
-
-#define LN_id_qt_unotice	"Policy Qualifier User Notice"
-#define SN_id_qt_unotice	"id-qt-unotice"
-#define NID_id_qt_unotice	165
-#define OBJ_id_qt_unotice	OBJ_id_pkix,2L,2L
-
-#define SN_rc2_64_cbc			"RC2-64-CBC"
-#define LN_rc2_64_cbc			"rc2-64-cbc"
-#define NID_rc2_64_cbc			166
-
-#define SN_SMIMECapabilities		"SMIME-CAPS"
-#define LN_SMIMECapabilities		"S/MIME Capabilities"
-#define NID_SMIMECapabilities		167
-#define OBJ_SMIMECapabilities		OBJ_pkcs9,15L
-
-#define SN_pbeWithMD2AndRC2_CBC		"PBE-MD2-RC2-64"
-#define LN_pbeWithMD2AndRC2_CBC		"pbeWithMD2AndRC2-CBC"
-#define NID_pbeWithMD2AndRC2_CBC	168
-#define OBJ_pbeWithMD2AndRC2_CBC	OBJ_pkcs,5L,4L
-
-#define SN_pbeWithMD5AndRC2_CBC		"PBE-MD5-RC2-64"
-#define LN_pbeWithMD5AndRC2_CBC		"pbeWithMD5AndRC2-CBC"
-#define NID_pbeWithMD5AndRC2_CBC	169
-#define OBJ_pbeWithMD5AndRC2_CBC	OBJ_pkcs,5L,6L
-
-#define SN_pbeWithSHA1AndDES_CBC	"PBE-SHA1-DES"
-#define LN_pbeWithSHA1AndDES_CBC	"pbeWithSHA1AndDES-CBC"
-#define NID_pbeWithSHA1AndDES_CBC	170
-#define OBJ_pbeWithSHA1AndDES_CBC	OBJ_pkcs,5L,10L
-
-/* Extension request OIDs */
-
-#define LN_ms_ext_req			"Microsoft Extension Request"
-#define SN_ms_ext_req			"msExtReq"
-#define NID_ms_ext_req			171
-#define OBJ_ms_ext_req			1L,3L,6L,1L,4L,1L,311L,2L,1L,14L
-
-#define LN_ext_req			"Extension Request"
-#define SN_ext_req			"extReq"
-#define NID_ext_req			172
-#define OBJ_ext_req			OBJ_pkcs9,14L
-
-#define SN_name				"name"
-#define LN_name				"name"
-#define NID_name			173
-#define OBJ_name			OBJ_X509,41L
-
-#define SN_dnQualifier			"dnQualifier"
-#define LN_dnQualifier			"dnQualifier"
-#define NID_dnQualifier			174
-#define OBJ_dnQualifier			OBJ_X509,46L
-
-#define SN_id_pe			"id-pe"
-#define NID_id_pe			175
-#define OBJ_id_pe			OBJ_id_pkix,1L
-
-#define SN_id_ad			"id-ad"
-#define NID_id_ad			176
-#define OBJ_id_ad			OBJ_id_pkix,48L
-
-#define SN_info_access			"authorityInfoAccess"
-#define LN_info_access			"Authority Information Access"
-#define NID_info_access			177
-#define OBJ_info_access			OBJ_id_pe,1L
-
-#define SN_ad_OCSP			"OCSP"
-#define LN_ad_OCSP			"OCSP"
-#define NID_ad_OCSP			178
-#define OBJ_ad_OCSP			OBJ_id_ad,1L
-
-#define SN_ad_ca_issuers		"caIssuers"
-#define LN_ad_ca_issuers		"CA Issuers"
-#define NID_ad_ca_issuers		179
-#define OBJ_ad_ca_issuers		OBJ_id_ad,2L
-
-#define SN_OCSP_sign			"OCSPSigning"
-#define LN_OCSP_sign			"OCSP Signing"
-#define NID_OCSP_sign			180
-#define OBJ_OCSP_sign			OBJ_id_kp,9L
-#endif /* USE_OBJ_MAC */
-
-#include <openssl/bio.h>
-#include <openssl/asn1.h>
-
-#define	OBJ_NAME_TYPE_UNDEF		0x00
-#define	OBJ_NAME_TYPE_MD_METH		0x01
-#define	OBJ_NAME_TYPE_CIPHER_METH	0x02
-#define	OBJ_NAME_TYPE_PKEY_METH		0x03
-#define	OBJ_NAME_TYPE_COMP_METH		0x04
-#define	OBJ_NAME_TYPE_NUM		0x05
-
-#define	OBJ_NAME_ALIAS			0x8000
-
-#define OBJ_BSEARCH_VALUE_ON_NOMATCH		0x01
-#define OBJ_BSEARCH_FIRST_VALUE_ON_MATCH	0x02
-
-
-#ifdef  __cplusplus
-extern "C" {
-#endif
-
-typedef struct obj_name_st
-	{
-	int type;
-	int alias;
-	const char *name;
-	const char *data;
-	} OBJ_NAME;
-
-#define		OBJ_create_and_add_object(a,b,c) OBJ_create(a,b,c)
-
-
-int OBJ_NAME_init(void);
-int OBJ_NAME_new_index(unsigned long (*hash_func)(const char *),
-		       int (*cmp_func)(const char *, const char *),
-		       void (*free_func)(const char *, int, const char *));
-const char *OBJ_NAME_get(const char *name,int type);
-int OBJ_NAME_add(const char *name,int type,const char *data);
-int OBJ_NAME_remove(const char *name,int type);
-void OBJ_NAME_cleanup(int type); /* -1 for everything */
-void OBJ_NAME_do_all(int type,void (*fn)(const OBJ_NAME *,void *arg),
-		     void *arg);
-void OBJ_NAME_do_all_sorted(int type,void (*fn)(const OBJ_NAME *,void *arg),
-			    void *arg);
-
-ASN1_OBJECT *	OBJ_dup(const ASN1_OBJECT *o);
-ASN1_OBJECT *	OBJ_nid2obj(int n);
-const char *	OBJ_nid2ln(int n);
-const char *	OBJ_nid2sn(int n);
-int		OBJ_obj2nid(const ASN1_OBJECT *o);
-ASN1_OBJECT *	OBJ_txt2obj(const char *s, int no_name);
-int	OBJ_obj2txt(char *buf, int buf_len, const ASN1_OBJECT *a, int no_name);
-int		OBJ_txt2nid(const char *s);
-int		OBJ_ln2nid(const char *s);
-int		OBJ_sn2nid(const char *s);
-int		OBJ_cmp(const ASN1_OBJECT *a,const ASN1_OBJECT *b);
-const char *	OBJ_bsearch(const char *key,const char *base,int num,int size,
-	int (*cmp)(const void *, const void *));
-const char *	OBJ_bsearch_ex(const char *key,const char *base,int num,
-	int size, int (*cmp)(const void *, const void *), int flags);
-
-int		OBJ_new_nid(int num);
-int		OBJ_add_object(const ASN1_OBJECT *obj);
-int		OBJ_create(const char *oid,const char *sn,const char *ln);
-void		OBJ_cleanup(void );
-int		OBJ_create_objects(BIO *in);
-
-/* BEGIN ERROR CODES */
-/* The following lines are auto generated by the script mkerr.pl. Any changes
- * made after this point may be overwritten when the script is next run.
- */
-void ERR_load_OBJ_strings(void);
-
-/* Error codes for the OBJ functions. */
-
-/* Function codes. */
-#define OBJ_F_OBJ_ADD_OBJECT				 105
-#define OBJ_F_OBJ_CREATE				 100
-#define OBJ_F_OBJ_DUP					 101
-#define OBJ_F_OBJ_NAME_NEW_INDEX			 106
-#define OBJ_F_OBJ_NID2LN				 102
-#define OBJ_F_OBJ_NID2OBJ				 103
-#define OBJ_F_OBJ_NID2SN				 104
-
-/* Reason codes. */
-#define OBJ_R_MALLOC_FAILURE				 100
-#define OBJ_R_UNKNOWN_NID				 101
-
-#ifdef  __cplusplus
-}
-#endif
-#endif
diff --git a/crypto/openssl/crypto/objects/objects.pl b/crypto/openssl/crypto/objects/objects.pl
deleted file mode 100644
index 76c06cc8f9a2..000000000000
--- a/crypto/openssl/crypto/objects/objects.pl
+++ /dev/null
@@ -1,229 +0,0 @@
-#!/usr/local/bin/perl
-
-open (NUMIN,"$ARGV[1]") || die "Can't open number file $ARGV[1]";
-$max_nid=0;
-$o=0;
-while(<NUMIN>)
-	{
-	chop;
-	$o++;
-	s/#.*$//;
-	next if /^\s*$/;
-	$_ = 'X'.$_;
-	($Cname,$mynum) = split;
-	$Cname =~ s/^X//;
-	if (defined($nidn{$mynum}))
-		{ die "$ARGV[1]:$o:There's already an object with NID ",$mynum," on line ",$order{$mynum},"\n"; }
-	$nid{$Cname} = $mynum;
-	$nidn{$mynum} = $Cname;
-	$order{$mynum} = $o;
-	$max_nid = $mynum if $mynum > $max_nid;
-	}
-close NUMIN;
-
-open (IN,"$ARGV[0]") || die "Can't open input file $ARGV[0]";
-$Cname="";
-$o=0;
-while (<IN>)
-	{
-	chop;
-	$o++;
-        if (/^!module\s+(.*)$/)
-		{
-		$module = $1."-";
-		$module =~ s/\./_/g;
-		$module =~ s/-/_/g;
-		}
-        if (/^!global$/)
-		{ $module = ""; }
-	if (/^!Cname\s+(.*)$/)
-		{ $Cname = $1; }
-	if (/^!Alias\s+(.+?)\s+(.*)$/)
-		{
-		$Cname = $module.$1;
-		$myoid = $2;
-		$myoid = &process_oid($myoid);
-		$Cname =~ s/-/_/g;
-		$ordern{$o} = $Cname;
-		$order{$Cname} = $o;
-		$obj{$Cname} = $myoid;
-		$_ = "";
-		$Cname = "";
-		}
-	s/!.*$//;
-	s/#.*$//;
-	next if /^\s*$/;
-	($myoid,$mysn,$myln) = split ':';
-	$mysn =~ s/^\s*//;
-	$mysn =~ s/\s*$//;
-	$myln =~ s/^\s*//;
-	$myln =~ s/\s*$//;
-	$myoid =~ s/^\s*//;
-	$myoid =~ s/\s*$//;
-	if ($myoid ne "")
-		{
-		$myoid = &process_oid($myoid);
-		}
-
-	if ($Cname eq "" && !($myln =~ / /))
-		{
-		$Cname = $myln;
-		$Cname =~ s/\./_/g;
-		$Cname =~ s/-/_/g;
-		if ($Cname ne "" && defined($ln{$module.$Cname}))
-			{ die "objects.txt:$o:There's already an object with long name ",$ln{$module.$Cname}," on line ",$order{$module.$Cname},"\n"; }
-		}
-	if ($Cname eq "")
-		{
-		$Cname = $mysn;
-		$Cname =~ s/-/_/g;
-		if ($Cname ne "" && defined($sn{$module.$Cname}))
-			{ die "objects.txt:$o:There's already an object with short name ",$sn{$module.$Cname}," on line ",$order{$module.$Cname},"\n"; }
-		}
-	if ($Cname eq "")
-		{
-		$Cname = $myln;
-		$Cname =~ s/-/_/g;
-		$Cname =~ s/\./_/g;
-		$Cname =~ s/ /_/g;
-		if ($Cname ne "" && defined($ln{$module.$Cname}))
-			{ die "objects.txt:$o:There's already an object with long name ",$ln{$module.$Cname}," on line ",$order{$module.$Cname},"\n"; }
-		}
-	$Cname =~ s/\./_/g;
-	$Cname =~ s/-/_/g;
-	$Cname = $module.$Cname;
-	$ordern{$o} = $Cname;
-	$order{$Cname} = $o;
-	$sn{$Cname} = $mysn;
-	$ln{$Cname} = $myln;
-	$obj{$Cname} = $myoid;
-	if (!defined($nid{$Cname}))
-		{
-		$max_nid++;
-		$nid{$Cname} = $max_nid;
-		$nidn{$max_nid} = $Cname;
-		}
-	$Cname="";
-	}
-close IN;
-
-open (NUMOUT,">$ARGV[1]") || die "Can't open output file $ARGV[1]";
-foreach (sort { $a <=> $b } keys %nidn)
-	{
-	print NUMOUT $nidn{$_},"\t\t",$_,"\n";
-	}
-close NUMOUT;
-
-open (OUT,">$ARGV[2]") || die "Can't open output file $ARGV[2]";
-print OUT <<'EOF';
-/* crypto/objects/obj_mac.h */
-
-/* THIS FILE IS GENERATED FROM objects.txt by objects.pl via the
- * following command:
- * perl objects.pl objects.txt obj_mac.num obj_mac.h
- */
-
-/* Copyright (C) 1995-1997 Eric Young (eay@cryptsoft.com)
- * All rights reserved.
- *
- * This package is an SSL implementation written
- * by Eric Young (eay@cryptsoft.com).
- * The implementation was written so as to conform with Netscapes SSL.
- * 
- * This library is free for commercial and non-commercial use as long as
- * the following conditions are aheared to.  The following conditions
- * apply to all code found in this distribution, be it the RC4, RSA,
- * lhash, DES, etc., code; not just the SSL code.  The SSL documentation
- * included with this distribution is covered by the same copyright terms
- * except that the holder is Tim Hudson (tjh@cryptsoft.com).
- * 
- * Copyright remains Eric Young's, and as such any Copyright notices in
- * the code are not to be removed.
- * If this package is used in a product, Eric Young should be given attribution
- * as the author of the parts of the library used.
- * This can be in the form of a textual message at program startup or
- * in documentation (online or textual) provided with the package.
- * 
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions
- * are met:
- * 1. Redistributions of source code must retain the copyright
- *    notice, this list of conditions and the following disclaimer.
- * 2. Redistributions in binary form must reproduce the above copyright
- *    notice, this list of conditions and the following disclaimer in the
- *    documentation and/or other materials provided with the distribution.
- * 3. All advertising materials mentioning features or use of this software
- *    must display the following acknowledgement:
- *    "This product includes cryptographic software written by
- *     Eric Young (eay@cryptsoft.com)"
- *    The word 'cryptographic' can be left out if the rouines from the library
- *    being used are not cryptographic related :-).
- * 4. If you include any Windows specific code (or a derivative thereof) from 
- *    the apps directory (application code) you must include an acknowledgement:
- *    "This product includes software written by Tim Hudson (tjh@cryptsoft.com)"
- * 
- * THIS SOFTWARE IS PROVIDED BY ERIC YOUNG ``AS IS'' AND
- * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
- * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
- * ARE DISCLAIMED.  IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE
- * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
- * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
- * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
- * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
- * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
- * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
- * SUCH DAMAGE.
- * 
- * The licence and distribution terms for any publically available version or
- * derivative of this code cannot be changed.  i.e. this code cannot simply be
- * copied and put under another distribution licence
- * [including the GNU Public Licence.]
- */
-
-#define SN_undef			"UNDEF"
-#define LN_undef			"undefined"
-#define NID_undef			0
-#define OBJ_undef			0L
-
-EOF
-
-foreach (sort { $a <=> $b } keys %ordern)
-	{
-	$Cname=$ordern{$_};
-	print OUT "#define SN_",$Cname,"\t\t\"",$sn{$Cname},"\"\n" if $sn{$Cname} ne "";
-	print OUT "#define LN_",$Cname,"\t\t\"",$ln{$Cname},"\"\n" if $ln{$Cname} ne "";
-	print OUT "#define NID_",$Cname,"\t\t",$nid{$Cname},"\n" if $nid{$Cname} ne "";
-	print OUT "#define OBJ_",$Cname,"\t\t",$obj{$Cname},"\n" if $obj{$Cname} ne "";
-	print OUT "\n";
-	}
-
-close OUT;
-
-sub process_oid
-	{
-	local($oid)=@_;
-	local(@a,$oid_pref);
-
-	@a = split(/\s+/,$myoid);
-	$pref_oid = "";
-	$pref_sep = "";
-	if (!($a[0] =~ /^[0-9]+$/))
-		{
-		$a[0] =~ s/-/_/g;
-		if (!defined($obj{$a[0]}))
-			{ die "$ARGV[0]:$o:Undefined identifier ",$a[0],"\n"; }
-		$pref_oid = "OBJ_" . $a[0];
-		$pref_sep = ",";
-		shift @a;
-		}
-	$oids = join('L,',@a) . "L";
-	if ($oids ne "L")
-		{
-		$oids = $pref_oid . $pref_sep . $oids;
-		}
-	else
-		{
-		$oids = $pref_oid;
-		}
-	return($oids);
-	}
diff --git a/crypto/openssl/crypto/objects/objects.txt b/crypto/openssl/crypto/objects/objects.txt
deleted file mode 100644
index 1ba517a8eb3f..000000000000
--- a/crypto/openssl/crypto/objects/objects.txt
+++ /dev/null
@@ -1,1093 +0,0 @@
-# CCITT was renamed to ITU-T quite some time ago
-0			: ITU-T			: itu-t
-!Alias ccitt itu-t
-
-1			: ISO			: iso
-
-2			: JOINT-ISO-ITU-T	: joint-iso-itu-t
-!Alias joint-iso-ccitt joint-iso-itu-t
-
-iso 2			: member-body		: ISO Member Body
-
-iso 3			: identified-organization
-
-identified-organization 132	: certicom-arc
-
-joint-iso-itu-t 23	: international-organizations	: International Organizations
-
-international-organizations 43	: wap
-wap 13			: wap-wsg
-
-joint-iso-itu-t 5 1 5	: selected-attribute-types	: Selected Attribute Types
-
-selected-attribute-types 55	: clearance
-
-member-body 840		: ISO-US		: ISO US Member Body
-ISO-US 10040		: X9-57			: X9.57
-X9-57 4			: X9cm			: X9.57 CM ?
-
-!Cname dsa
-X9cm 1			: DSA			: dsaEncryption
-X9cm 3			: DSA-SHA1		: dsaWithSHA1
-
-
-ISO-US 10045		: ansi-X9-62		: ANSI X9.62
-!module X9-62
-!Alias id-fieldType ansi-X9-62 1
-X9-62_id-fieldType 1		: prime-field
-X9-62_id-fieldType 2		: characteristic-two-field
-X9-62_characteristic-two-field 3 : id-characteristic-two-basis
-X9-62_id-characteristic-two-basis 1 : onBasis
-X9-62_id-characteristic-two-basis 2 : tpBasis
-X9-62_id-characteristic-two-basis 3 : ppBasis
-!Alias id-publicKeyType ansi-X9-62 2
-X9-62_id-publicKeyType 1	: id-ecPublicKey
-!Alias ellipticCurve ansi-X9-62 3
-!Alias c-TwoCurve X9-62_ellipticCurve 0
-X9-62_c-TwoCurve 1		: c2pnb163v1
-X9-62_c-TwoCurve 2		: c2pnb163v2
-X9-62_c-TwoCurve 3		: c2pnb163v3
-X9-62_c-TwoCurve 4		: c2pnb176v1
-X9-62_c-TwoCurve 5		: c2tnb191v1
-X9-62_c-TwoCurve 6		: c2tnb191v2
-X9-62_c-TwoCurve 7		: c2tnb191v3
-X9-62_c-TwoCurve 8		: c2onb191v4
-X9-62_c-TwoCurve 9		: c2onb191v5
-X9-62_c-TwoCurve 10		: c2pnb208w1
-X9-62_c-TwoCurve 11		: c2tnb239v1
-X9-62_c-TwoCurve 12		: c2tnb239v2
-X9-62_c-TwoCurve 13		: c2tnb239v3
-X9-62_c-TwoCurve 14		: c2onb239v4
-X9-62_c-TwoCurve 15		: c2onb239v5
-X9-62_c-TwoCurve 16		: c2pnb272w1
-X9-62_c-TwoCurve 17		: c2pnb304w1
-X9-62_c-TwoCurve 18		: c2tnb359v1
-X9-62_c-TwoCurve 19		: c2pnb368w1
-X9-62_c-TwoCurve 20		: c2tnb431r1
-!Alias primeCurve X9-62_ellipticCurve 1
-X9-62_primeCurve 1	 	: prime192v1
-X9-62_primeCurve 2	 	: prime192v2
-X9-62_primeCurve 3	 	: prime192v3
-X9-62_primeCurve 4	 	: prime239v1
-X9-62_primeCurve 5	 	: prime239v2
-X9-62_primeCurve 6	 	: prime239v3
-X9-62_primeCurve 7	 	: prime256v1
-!Alias id-ecSigType ansi-X9-62 4
-!global
-X9-62_id-ecSigType 1		: ecdsa-with-SHA1
-
-# SECG curve OIDs from "SEC 2: Recommended Elliptic Curve Domain Parameters"
-# (http://www.secg.org/)
-!Alias secg_ellipticCurve certicom-arc 0
-# SECG prime curves OIDs
-secg-ellipticCurve 6		: secp112r1
-secg-ellipticCurve 7		: secp112r2
-secg-ellipticCurve 28		: secp128r1
-secg-ellipticCurve 29		: secp128r2
-secg-ellipticCurve 9		: secp160k1
-secg-ellipticCurve 8		: secp160r1
-secg-ellipticCurve 30		: secp160r2
-secg-ellipticCurve 31		: secp192k1
-# NOTE: the curve secp192r1 is the same as prime192v1 defined above
-#       and is therefore omitted
-secg-ellipticCurve 32		: secp224k1
-secg-ellipticCurve 33		: secp224r1
-secg-ellipticCurve 10		: secp256k1
-# NOTE: the curve secp256r1 is the same as prime256v1 defined above
-#       and is therefore omitted
-secg-ellipticCurve 34		: secp384r1
-secg-ellipticCurve 35		: secp521r1
-# SECG characteristic two curves OIDs
-secg-ellipticCurve 4		: sect113r1
-secg-ellipticCurve 5		: sect113r2
-secg-ellipticCurve 22		: sect131r1
-secg-ellipticCurve 23		: sect131r2
-secg-ellipticCurve 1		: sect163k1
-secg-ellipticCurve 2		: sect163r1
-secg-ellipticCurve 15		: sect163r2
-secg-ellipticCurve 24		: sect193r1
-secg-ellipticCurve 25		: sect193r2
-secg-ellipticCurve 26		: sect233k1
-secg-ellipticCurve 27		: sect233r1
-secg-ellipticCurve 3		: sect239k1
-secg-ellipticCurve 16		: sect283k1
-secg-ellipticCurve 17		: sect283r1
-secg-ellipticCurve 36		: sect409k1
-secg-ellipticCurve 37		: sect409r1
-secg-ellipticCurve 38		: sect571k1
-secg-ellipticCurve 39		: sect571r1
-
-# WAP/TLS curve OIDs (http://www.wapforum.org/)
-!Alias wap-wsg-idm-ecid wap-wsg 4
-wap-wsg-idm-ecid 1	: wap-wsg-idm-ecid-wtls1
-wap-wsg-idm-ecid 3	: wap-wsg-idm-ecid-wtls3
-wap-wsg-idm-ecid 4	: wap-wsg-idm-ecid-wtls4
-wap-wsg-idm-ecid 5	: wap-wsg-idm-ecid-wtls5
-wap-wsg-idm-ecid 6	: wap-wsg-idm-ecid-wtls6
-wap-wsg-idm-ecid 7	: wap-wsg-idm-ecid-wtls7
-wap-wsg-idm-ecid 8	: wap-wsg-idm-ecid-wtls8
-wap-wsg-idm-ecid 9	: wap-wsg-idm-ecid-wtls9
-wap-wsg-idm-ecid 10	: wap-wsg-idm-ecid-wtls10
-wap-wsg-idm-ecid 11	: wap-wsg-idm-ecid-wtls11
-wap-wsg-idm-ecid 12	: wap-wsg-idm-ecid-wtls12
-
-
-ISO-US 113533 7 66 10	: CAST5-CBC		: cast5-cbc
-			: CAST5-ECB		: cast5-ecb
-!Cname cast5-cfb64
-			: CAST5-CFB		: cast5-cfb
-!Cname cast5-ofb64
-			: CAST5-OFB		: cast5-ofb
-!Cname pbeWithMD5AndCast5-CBC
-ISO-US 113533 7 66 12	:			: pbeWithMD5AndCast5CBC
-
-ISO-US 113549		: rsadsi		: RSA Data Security, Inc.
-
-rsadsi 1		: pkcs			: RSA Data Security, Inc. PKCS
-
-pkcs 1			: pkcs1
-pkcs1 1			:			: rsaEncryption
-pkcs1 2			: RSA-MD2		: md2WithRSAEncryption
-pkcs1 3			: RSA-MD4		: md4WithRSAEncryption
-pkcs1 4			: RSA-MD5		: md5WithRSAEncryption
-pkcs1 5			: RSA-SHA1		: sha1WithRSAEncryption
-# According to PKCS #1 version 2.1
-pkcs1 11		: RSA-SHA256		: sha256WithRSAEncryption
-pkcs1 12		: RSA-SHA384		: sha384WithRSAEncryption
-pkcs1 13		: RSA-SHA512		: sha512WithRSAEncryption
-pkcs1 14		: RSA-SHA224		: sha224WithRSAEncryption
-
-pkcs 3			: pkcs3
-pkcs3 1			:			: dhKeyAgreement
-
-pkcs 5			: pkcs5
-pkcs5 1			: PBE-MD2-DES		: pbeWithMD2AndDES-CBC
-pkcs5 3			: PBE-MD5-DES		: pbeWithMD5AndDES-CBC
-pkcs5 4			: PBE-MD2-RC2-64	: pbeWithMD2AndRC2-CBC
-pkcs5 6			: PBE-MD5-RC2-64	: pbeWithMD5AndRC2-CBC
-pkcs5 10		: PBE-SHA1-DES		: pbeWithSHA1AndDES-CBC
-pkcs5 11		: PBE-SHA1-RC2-64	: pbeWithSHA1AndRC2-CBC
-!Cname id_pbkdf2
-pkcs5 12		:			: PBKDF2
-!Cname pbes2
-pkcs5 13		:			: PBES2
-!Cname pbmac1
-pkcs5 14		:			: PBMAC1
-
-pkcs 7			: pkcs7
-pkcs7 1			:			: pkcs7-data
-!Cname pkcs7-signed
-pkcs7 2			:			: pkcs7-signedData
-!Cname pkcs7-enveloped
-pkcs7 3			:			: pkcs7-envelopedData
-!Cname pkcs7-signedAndEnveloped
-pkcs7 4			:			: pkcs7-signedAndEnvelopedData
-!Cname pkcs7-digest
-pkcs7 5			:			: pkcs7-digestData
-!Cname pkcs7-encrypted
-pkcs7 6			:			: pkcs7-encryptedData
-
-pkcs 9			: pkcs9
-!module pkcs9
-pkcs9 1			: 			: emailAddress
-pkcs9 2			:			: unstructuredName
-pkcs9 3			:			: contentType
-pkcs9 4			:			: messageDigest
-pkcs9 5			:			: signingTime
-pkcs9 6			:			: countersignature
-pkcs9 7			:			: challengePassword
-pkcs9 8			:			: unstructuredAddress
-!Cname extCertAttributes
-pkcs9 9			:			: extendedCertificateAttributes
-!global
-
-!Cname ext-req
-pkcs9 14		: extReq		: Extension Request
-
-!Cname SMIMECapabilities
-pkcs9 15		: SMIME-CAPS		: S/MIME Capabilities
-
-# S/MIME
-!Cname SMIME
-pkcs9 16		: SMIME			: S/MIME
-SMIME 0			: id-smime-mod
-SMIME 1			: id-smime-ct
-SMIME 2			: id-smime-aa
-SMIME 3			: id-smime-alg
-SMIME 4			: id-smime-cd
-SMIME 5			: id-smime-spq
-SMIME 6			: id-smime-cti
-
-# S/MIME Modules
-id-smime-mod 1		: id-smime-mod-cms
-id-smime-mod 2		: id-smime-mod-ess
-id-smime-mod 3		: id-smime-mod-oid
-id-smime-mod 4		: id-smime-mod-msg-v3
-id-smime-mod 5		: id-smime-mod-ets-eSignature-88
-id-smime-mod 6		: id-smime-mod-ets-eSignature-97
-id-smime-mod 7		: id-smime-mod-ets-eSigPolicy-88
-id-smime-mod 8		: id-smime-mod-ets-eSigPolicy-97
-
-# S/MIME Content Types
-id-smime-ct 1		: id-smime-ct-receipt
-id-smime-ct 2		: id-smime-ct-authData
-id-smime-ct 3		: id-smime-ct-publishCert
-id-smime-ct 4		: id-smime-ct-TSTInfo
-id-smime-ct 5		: id-smime-ct-TDTInfo
-id-smime-ct 6		: id-smime-ct-contentInfo
-id-smime-ct 7		: id-smime-ct-DVCSRequestData
-id-smime-ct 8		: id-smime-ct-DVCSResponseData
-
-# S/MIME Attributes
-id-smime-aa 1		: id-smime-aa-receiptRequest
-id-smime-aa 2		: id-smime-aa-securityLabel
-id-smime-aa 3		: id-smime-aa-mlExpandHistory
-id-smime-aa 4		: id-smime-aa-contentHint
-id-smime-aa 5		: id-smime-aa-msgSigDigest
-# obsolete
-id-smime-aa 6		: id-smime-aa-encapContentType
-id-smime-aa 7		: id-smime-aa-contentIdentifier
-# obsolete
-id-smime-aa 8		: id-smime-aa-macValue
-id-smime-aa 9		: id-smime-aa-equivalentLabels
-id-smime-aa 10		: id-smime-aa-contentReference
-id-smime-aa 11		: id-smime-aa-encrypKeyPref
-id-smime-aa 12		: id-smime-aa-signingCertificate
-id-smime-aa 13		: id-smime-aa-smimeEncryptCerts
-id-smime-aa 14		: id-smime-aa-timeStampToken
-id-smime-aa 15		: id-smime-aa-ets-sigPolicyId
-id-smime-aa 16		: id-smime-aa-ets-commitmentType
-id-smime-aa 17		: id-smime-aa-ets-signerLocation
-id-smime-aa 18		: id-smime-aa-ets-signerAttr
-id-smime-aa 19		: id-smime-aa-ets-otherSigCert
-id-smime-aa 20		: id-smime-aa-ets-contentTimestamp
-id-smime-aa 21		: id-smime-aa-ets-CertificateRefs
-id-smime-aa 22		: id-smime-aa-ets-RevocationRefs
-id-smime-aa 23		: id-smime-aa-ets-certValues
-id-smime-aa 24		: id-smime-aa-ets-revocationValues
-id-smime-aa 25		: id-smime-aa-ets-escTimeStamp
-id-smime-aa 26		: id-smime-aa-ets-certCRLTimestamp
-id-smime-aa 27		: id-smime-aa-ets-archiveTimeStamp
-id-smime-aa 28		: id-smime-aa-signatureType
-id-smime-aa 29		: id-smime-aa-dvcs-dvc
-
-# S/MIME Algorithm Identifiers
-# obsolete
-id-smime-alg 1		: id-smime-alg-ESDHwith3DES
-# obsolete
-id-smime-alg 2		: id-smime-alg-ESDHwithRC2
-# obsolete
-id-smime-alg 3		: id-smime-alg-3DESwrap
-# obsolete
-id-smime-alg 4		: id-smime-alg-RC2wrap
-id-smime-alg 5		: id-smime-alg-ESDH
-id-smime-alg 6		: id-smime-alg-CMS3DESwrap
-id-smime-alg 7		: id-smime-alg-CMSRC2wrap
-
-# S/MIME Certificate Distribution
-id-smime-cd 1		: id-smime-cd-ldap
-
-# S/MIME Signature Policy Qualifier
-id-smime-spq 1		: id-smime-spq-ets-sqt-uri
-id-smime-spq 2		: id-smime-spq-ets-sqt-unotice
-
-# S/MIME Commitment Type Identifier
-id-smime-cti 1		: id-smime-cti-ets-proofOfOrigin
-id-smime-cti 2		: id-smime-cti-ets-proofOfReceipt
-id-smime-cti 3		: id-smime-cti-ets-proofOfDelivery
-id-smime-cti 4		: id-smime-cti-ets-proofOfSender
-id-smime-cti 5		: id-smime-cti-ets-proofOfApproval
-id-smime-cti 6		: id-smime-cti-ets-proofOfCreation
-
-pkcs9 20		:			: friendlyName
-pkcs9 21		:			: localKeyID
-!Cname ms-csp-name
-1 3 6 1 4 1 311 17 1	: CSPName		: Microsoft CSP Name
-!Alias certTypes pkcs9 22
-certTypes 1		:			: x509Certificate
-certTypes 2		:			: sdsiCertificate
-!Alias crlTypes pkcs9 23
-crlTypes 1		:			: x509Crl
-
-!Alias pkcs12 pkcs 12
-!Alias pkcs12-pbeids pkcs12 1
-
-!Cname pbe-WithSHA1And128BitRC4
-pkcs12-pbeids 1		: PBE-SHA1-RC4-128	: pbeWithSHA1And128BitRC4
-!Cname pbe-WithSHA1And40BitRC4
-pkcs12-pbeids 2		: PBE-SHA1-RC4-40	: pbeWithSHA1And40BitRC4
-!Cname pbe-WithSHA1And3_Key_TripleDES-CBC
-pkcs12-pbeids 3		: PBE-SHA1-3DES		: pbeWithSHA1And3-KeyTripleDES-CBC
-!Cname pbe-WithSHA1And2_Key_TripleDES-CBC
-pkcs12-pbeids 4		: PBE-SHA1-2DES		: pbeWithSHA1And2-KeyTripleDES-CBC
-!Cname pbe-WithSHA1And128BitRC2-CBC
-pkcs12-pbeids 5		: PBE-SHA1-RC2-128	: pbeWithSHA1And128BitRC2-CBC
-!Cname pbe-WithSHA1And40BitRC2-CBC
-pkcs12-pbeids 6		: PBE-SHA1-RC2-40	: pbeWithSHA1And40BitRC2-CBC
-
-!Alias pkcs12-Version1 pkcs12 10
-!Alias pkcs12-BagIds pkcs12-Version1 1
-pkcs12-BagIds 1		:			: keyBag
-pkcs12-BagIds 2		:			: pkcs8ShroudedKeyBag
-pkcs12-BagIds 3		:			: certBag
-pkcs12-BagIds 4		:			: crlBag
-pkcs12-BagIds 5		:			: secretBag
-pkcs12-BagIds 6		:			: safeContentsBag
-
-rsadsi 2 2		: MD2			: md2
-rsadsi 2 4		: MD4			: md4
-rsadsi 2 5		: MD5			: md5
-			: MD5-SHA1		: md5-sha1
-rsadsi 2 7		:			: hmacWithSHA1
-rsadsi 3 2		: RC2-CBC		: rc2-cbc
-			: RC2-ECB		: rc2-ecb
-!Cname rc2-cfb64
-			: RC2-CFB		: rc2-cfb
-!Cname rc2-ofb64
-			: RC2-OFB		: rc2-ofb
-			: RC2-40-CBC		: rc2-40-cbc
-			: RC2-64-CBC		: rc2-64-cbc
-rsadsi 3 4		: RC4			: rc4
-			: RC4-40		: rc4-40
-rsadsi 3 7		: DES-EDE3-CBC		: des-ede3-cbc
-rsadsi 3 8		: RC5-CBC		: rc5-cbc
-			: RC5-ECB		: rc5-ecb
-!Cname rc5-cfb64
-			: RC5-CFB		: rc5-cfb
-!Cname rc5-ofb64
-			: RC5-OFB		: rc5-ofb
-
-!Cname ms-ext-req
-1 3 6 1 4 1 311 2 1 14	: msExtReq		: Microsoft Extension Request
-!Cname ms-code-ind
-1 3 6 1 4 1 311 2 1 21	: msCodeInd		: Microsoft Individual Code Signing
-!Cname ms-code-com
-1 3 6 1 4 1 311 2 1 22	: msCodeCom		: Microsoft Commercial Code Signing
-!Cname ms-ctl-sign
-1 3 6 1 4 1 311 10 3 1	: msCTLSign		: Microsoft Trust List Signing
-!Cname ms-sgc
-1 3 6 1 4 1 311 10 3 3	: msSGC			: Microsoft Server Gated Crypto
-!Cname ms-efs
-1 3 6 1 4 1 311 10 3 4	: msEFS			: Microsoft Encrypted File System
-!Cname ms-smartcard-login
-1 3 6 1 4 1 311 20 2 2	: msSmartcardLogin	: Microsoft Smartcardlogin
-!Cname ms-upn
-1 3 6 1 4 1 311 20 2 3	: msUPN			: Microsoft Universal Principal Name
-
-1 3 6 1 4 1 188 7 1 1 2	: IDEA-CBC		: idea-cbc
-			: IDEA-ECB		: idea-ecb
-!Cname idea-cfb64
-			: IDEA-CFB		: idea-cfb
-!Cname idea-ofb64
-			: IDEA-OFB		: idea-ofb
-
-1 3 6 1 4 1 3029 1 2	: BF-CBC		: bf-cbc
-			: BF-ECB		: bf-ecb
-!Cname bf-cfb64
-			: BF-CFB		: bf-cfb
-!Cname bf-ofb64
-			: BF-OFB		: bf-ofb
-
-!Cname id-pkix
-1 3 6 1 5 5 7		: PKIX
-
-# PKIX Arcs
-id-pkix 0		: id-pkix-mod
-id-pkix 1		: id-pe
-id-pkix 2		: id-qt
-id-pkix 3		: id-kp
-id-pkix 4		: id-it
-id-pkix 5		: id-pkip
-id-pkix 6		: id-alg
-id-pkix 7		: id-cmc
-id-pkix 8		: id-on
-id-pkix 9		: id-pda
-id-pkix 10		: id-aca
-id-pkix 11		: id-qcs
-id-pkix 12		: id-cct
-id-pkix 21		: id-ppl
-id-pkix 48		: id-ad
-
-# PKIX Modules
-id-pkix-mod 1		: id-pkix1-explicit-88
-id-pkix-mod 2		: id-pkix1-implicit-88
-id-pkix-mod 3		: id-pkix1-explicit-93
-id-pkix-mod 4		: id-pkix1-implicit-93
-id-pkix-mod 5		: id-mod-crmf
-id-pkix-mod 6		: id-mod-cmc
-id-pkix-mod 7		: id-mod-kea-profile-88
-id-pkix-mod 8		: id-mod-kea-profile-93
-id-pkix-mod 9		: id-mod-cmp
-id-pkix-mod 10		: id-mod-qualified-cert-88
-id-pkix-mod 11		: id-mod-qualified-cert-93
-id-pkix-mod 12		: id-mod-attribute-cert
-id-pkix-mod 13		: id-mod-timestamp-protocol
-id-pkix-mod 14		: id-mod-ocsp
-id-pkix-mod 15		: id-mod-dvcs
-id-pkix-mod 16		: id-mod-cmp2000
-
-# PKIX Private Extensions
-!Cname info-access
-id-pe 1			: authorityInfoAccess	: Authority Information Access
-id-pe 2			: biometricInfo		: Biometric Info
-id-pe 3			: qcStatements
-id-pe 4			: ac-auditEntity
-id-pe 5			: ac-targeting
-id-pe 6			: aaControls
-id-pe 7			: sbgp-ipAddrBlock
-id-pe 8			: sbgp-autonomousSysNum
-id-pe 9			: sbgp-routerIdentifier
-id-pe 10		: ac-proxying
-!Cname sinfo-access
-id-pe 11		: subjectInfoAccess	: Subject Information Access
-id-pe 14		: proxyCertInfo		: Proxy Certificate Information
-
-# PKIX policyQualifiers for Internet policy qualifiers
-id-qt 1			: id-qt-cps		: Policy Qualifier CPS
-id-qt 2			: id-qt-unotice		: Policy Qualifier User Notice
-id-qt 3			: textNotice
-
-# PKIX key purpose identifiers
-!Cname server-auth
-id-kp 1			: serverAuth		: TLS Web Server Authentication
-!Cname client-auth
-id-kp 2			: clientAuth		: TLS Web Client Authentication
-!Cname code-sign
-id-kp 3			: codeSigning		: Code Signing
-!Cname email-protect
-id-kp 4			: emailProtection	: E-mail Protection
-id-kp 5			: ipsecEndSystem	: IPSec End System
-id-kp 6			: ipsecTunnel		: IPSec Tunnel
-id-kp 7			: ipsecUser		: IPSec User
-!Cname time-stamp
-id-kp 8			: timeStamping		: Time Stamping
-# From OCSP spec RFC2560
-!Cname OCSP-sign
-id-kp 9			: OCSPSigning		: OCSP Signing
-id-kp 10		: DVCS			: dvcs
-
-# CMP information types
-id-it 1			: id-it-caProtEncCert
-id-it 2			: id-it-signKeyPairTypes
-id-it 3			: id-it-encKeyPairTypes
-id-it 4			: id-it-preferredSymmAlg
-id-it 5			: id-it-caKeyUpdateInfo
-id-it 6			: id-it-currentCRL
-id-it 7			: id-it-unsupportedOIDs
-# obsolete
-id-it 8			: id-it-subscriptionRequest
-# obsolete
-id-it 9			: id-it-subscriptionResponse
-id-it 10		: id-it-keyPairParamReq
-id-it 11		: id-it-keyPairParamRep
-id-it 12		: id-it-revPassphrase
-id-it 13		: id-it-implicitConfirm
-id-it 14		: id-it-confirmWaitTime
-id-it 15		: id-it-origPKIMessage
-
-# CRMF registration
-id-pkip 1		: id-regCtrl
-id-pkip 2		: id-regInfo
-
-# CRMF registration controls
-id-regCtrl 1		: id-regCtrl-regToken
-id-regCtrl 2		: id-regCtrl-authenticator
-id-regCtrl 3		: id-regCtrl-pkiPublicationInfo
-id-regCtrl 4		: id-regCtrl-pkiArchiveOptions
-id-regCtrl 5		: id-regCtrl-oldCertID
-id-regCtrl 6		: id-regCtrl-protocolEncrKey
-
-# CRMF registration information
-id-regInfo 1		: id-regInfo-utf8Pairs
-id-regInfo 2		: id-regInfo-certReq
-
-# algorithms
-id-alg 1		: id-alg-des40
-id-alg 2		: id-alg-noSignature
-id-alg 3		: id-alg-dh-sig-hmac-sha1
-id-alg 4		: id-alg-dh-pop
-
-# CMC controls
-id-cmc 1		: id-cmc-statusInfo
-id-cmc 2		: id-cmc-identification
-id-cmc 3		: id-cmc-identityProof
-id-cmc 4		: id-cmc-dataReturn
-id-cmc 5		: id-cmc-transactionId
-id-cmc 6		: id-cmc-senderNonce
-id-cmc 7		: id-cmc-recipientNonce
-id-cmc 8		: id-cmc-addExtensions
-id-cmc 9		: id-cmc-encryptedPOP
-id-cmc 10		: id-cmc-decryptedPOP
-id-cmc 11		: id-cmc-lraPOPWitness
-id-cmc 15		: id-cmc-getCert
-id-cmc 16		: id-cmc-getCRL
-id-cmc 17		: id-cmc-revokeRequest
-id-cmc 18		: id-cmc-regInfo
-id-cmc 19		: id-cmc-responseInfo
-id-cmc 21		: id-cmc-queryPending
-id-cmc 22		: id-cmc-popLinkRandom
-id-cmc 23		: id-cmc-popLinkWitness
-id-cmc 24		: id-cmc-confirmCertAcceptance 
-
-# other names
-id-on 1			: id-on-personalData
-
-# personal data attributes
-id-pda 1		: id-pda-dateOfBirth
-id-pda 2		: id-pda-placeOfBirth
-id-pda 3		: id-pda-gender
-id-pda 4		: id-pda-countryOfCitizenship
-id-pda 5		: id-pda-countryOfResidence
-
-# attribute certificate attributes
-id-aca 1		: id-aca-authenticationInfo
-id-aca 2		: id-aca-accessIdentity
-id-aca 3		: id-aca-chargingIdentity
-id-aca 4		: id-aca-group
-# attention : the following seems to be obsolete, replace by 'role'
-id-aca 5		: id-aca-role
-id-aca 6		: id-aca-encAttrs
-
-# qualified certificate statements
-id-qcs 1		: id-qcs-pkixQCSyntax-v1
-
-# CMC content types
-id-cct 1		: id-cct-crs
-id-cct 2		: id-cct-PKIData
-id-cct 3		: id-cct-PKIResponse
-
-# Predefined Proxy Certificate policy languages
-id-ppl 0		: id-ppl-anyLanguage	: Any language
-id-ppl 1		: id-ppl-inheritAll	: Inherit all
-id-ppl 2		: id-ppl-independent	: Independent
-
-# access descriptors for authority info access extension
-!Cname ad-OCSP
-id-ad 1			: OCSP			: OCSP
-!Cname ad-ca-issuers
-id-ad 2			: caIssuers		: CA Issuers
-!Cname ad-timeStamping
-id-ad 3			: ad_timestamping	: AD Time Stamping
-!Cname ad-dvcs
-id-ad 4			: AD_DVCS		: ad dvcs
-
-
-!Alias id-pkix-OCSP ad-OCSP
-!module id-pkix-OCSP
-!Cname basic
-id-pkix-OCSP 1		: basicOCSPResponse	: Basic OCSP Response
-id-pkix-OCSP 2		: Nonce			: OCSP Nonce
-id-pkix-OCSP 3		: CrlID			: OCSP CRL ID
-id-pkix-OCSP 4		: acceptableResponses	: Acceptable OCSP Responses
-id-pkix-OCSP 5		: noCheck		: OCSP No Check
-id-pkix-OCSP 6		: archiveCutoff		: OCSP Archive Cutoff
-id-pkix-OCSP 7		: serviceLocator	: OCSP Service Locator
-id-pkix-OCSP 8		: extendedStatus	: Extended OCSP Status
-id-pkix-OCSP 9		: valid
-id-pkix-OCSP 10		: path
-id-pkix-OCSP 11		: trustRoot		: Trust Root
-!global
-
-1 3 14 3 2		: algorithm		: algorithm
-algorithm 3		: RSA-NP-MD5		: md5WithRSA
-algorithm 6		: DES-ECB		: des-ecb
-algorithm 7		: DES-CBC		: des-cbc
-!Cname des-ofb64
-algorithm 8		: DES-OFB		: des-ofb
-!Cname des-cfb64
-algorithm 9		: DES-CFB		: des-cfb
-algorithm 11		: rsaSignature
-!Cname dsa-2
-algorithm 12		: DSA-old		: dsaEncryption-old
-algorithm 13		: DSA-SHA		: dsaWithSHA
-algorithm 15		: RSA-SHA		: shaWithRSAEncryption
-!Cname des-ede-ecb
-algorithm 17		: DES-EDE		: des-ede
-!Cname des-ede3-ecb
-			: DES-EDE3		: des-ede3
-			: DES-EDE-CBC		: des-ede-cbc
-!Cname des-ede-cfb64
-			: DES-EDE-CFB		: des-ede-cfb
-!Cname des-ede3-cfb64
-			: DES-EDE3-CFB		: des-ede3-cfb
-!Cname des-ede-ofb64
-			: DES-EDE-OFB		: des-ede-ofb
-!Cname des-ede3-ofb64
-			: DES-EDE3-OFB		: des-ede3-ofb
-			: DESX-CBC		: desx-cbc
-algorithm 18		: SHA			: sha
-algorithm 26		: SHA1			: sha1
-!Cname dsaWithSHA1-2
-algorithm 27		: DSA-SHA1-old		: dsaWithSHA1-old
-algorithm 29		: RSA-SHA1-2		: sha1WithRSA
-
-1 3 36 3 2 1		: RIPEMD160		: ripemd160
-1 3 36 3 3 1 2		: RSA-RIPEMD160		: ripemd160WithRSA
-
-!Cname sxnet
-1 3 101 1 4 1		: SXNetID		: Strong Extranet ID
-
-2 5			: X500			: directory services (X.500)
-
-X500 4			: X509
-X509 3			: CN			: commonName
-X509 4			: SN			: surname
-X509 5			: 			: serialNumber
-X509 6			: C			: countryName
-X509 7			: L			: localityName
-X509 8			: ST			: stateOrProvinceName
-X509 9			:			: streetAddress
-X509 10			: O			: organizationName
-X509 11			: OU			: organizationalUnitName
-X509 12			: 			: title
-X509 13			: 			: description
-X509 17			:			: postalCode
-X509 41			: name			: name
-X509 42			: GN			: givenName
-X509 43			: 			: initials
-X509 44			: 			: generationQualifier
-X509 45			: 			: x500UniqueIdentifier
-X509 46			: dnQualifier		: dnQualifier
-X509 65			:			: pseudonym
-X509 72			: role			: role
-
-X500 8			: X500algorithms	: directory services - algorithms
-X500algorithms 1 1	: RSA			: rsa
-X500algorithms 3 100	: RSA-MDC2		: mdc2WithRSA
-X500algorithms 3 101	: MDC2			: mdc2
-
-X500 29			: id-ce
-!Cname subject-directory-attributes
-id-ce 9			: subjectDirectoryAttributes : X509v3 Subject Directory Attributes
-!Cname subject-key-identifier
-id-ce 14		: subjectKeyIdentifier	: X509v3 Subject Key Identifier
-!Cname key-usage
-id-ce 15		: keyUsage		: X509v3 Key Usage
-!Cname private-key-usage-period
-id-ce 16		: privateKeyUsagePeriod	: X509v3 Private Key Usage Period
-!Cname subject-alt-name
-id-ce 17		: subjectAltName	: X509v3 Subject Alternative Name
-!Cname issuer-alt-name
-id-ce 18		: issuerAltName		: X509v3 Issuer Alternative Name
-!Cname basic-constraints
-id-ce 19		: basicConstraints	: X509v3 Basic Constraints
-!Cname crl-number
-id-ce 20		: crlNumber		: X509v3 CRL Number
-!Cname crl-reason
-id-ce 21		: CRLReason		: X509v3 CRL Reason Code
-!Cname invalidity-date
-id-ce 24		: invalidityDate	: Invalidity Date
-!Cname delta-crl
-id-ce 27		: deltaCRL		: X509v3 Delta CRL Indicator
-!Cname issuing-distribution-point
-id-ce 28		: issuingDistributionPoint : X509v3 Issuing Distrubution Point
-!Cname certificate-issuer
-id-ce 29		: certificateIssuer	: X509v3 Certificate Issuer
-!Cname name-constraints
-id-ce 30		: nameConstraints	: X509v3 Name Constraints
-!Cname crl-distribution-points
-id-ce 31		: crlDistributionPoints	: X509v3 CRL Distribution Points
-!Cname certificate-policies
-id-ce 32		: certificatePolicies	: X509v3 Certificate Policies
-!Cname any-policy
-certificate-policies 0	: anyPolicy		: X509v3 Any Policy
-!Cname policy-mappings
-id-ce 33		: policyMappings	: X509v3 Policy Mappings
-!Cname authority-key-identifier
-id-ce 35		: authorityKeyIdentifier : X509v3 Authority Key Identifier
-!Cname policy-constraints
-id-ce 36		: policyConstraints	: X509v3 Policy Constraints
-!Cname ext-key-usage
-id-ce 37		: extendedKeyUsage	: X509v3 Extended Key Usage
-!Cname inhibit-any-policy
-id-ce 54		: inhibitAnyPolicy	: X509v3 Inhibit Any Policy
-!Cname target-information
-id-ce 55		: targetInformation	: X509v3 AC Targeting
-!Cname no-rev-avail
-id-ce 56		: noRevAvail		: X509v3 No Revocation Available
-
-!Cname netscape
-2 16 840 1 113730	: Netscape		: Netscape Communications Corp.
-!Cname netscape-cert-extension
-netscape 1		: nsCertExt		: Netscape Certificate Extension
-!Cname netscape-data-type
-netscape 2		: nsDataType		: Netscape Data Type
-!Cname netscape-cert-type
-netscape-cert-extension 1 : nsCertType		: Netscape Cert Type
-!Cname netscape-base-url
-netscape-cert-extension 2 : nsBaseUrl		: Netscape Base Url
-!Cname netscape-revocation-url
-netscape-cert-extension 3 : nsRevocationUrl	: Netscape Revocation Url
-!Cname netscape-ca-revocation-url
-netscape-cert-extension 4 : nsCaRevocationUrl	: Netscape CA Revocation Url
-!Cname netscape-renewal-url
-netscape-cert-extension 7 : nsRenewalUrl	: Netscape Renewal Url
-!Cname netscape-ca-policy-url
-netscape-cert-extension 8 : nsCaPolicyUrl	: Netscape CA Policy Url
-!Cname netscape-ssl-server-name
-netscape-cert-extension 12 : nsSslServerName	: Netscape SSL Server Name
-!Cname netscape-comment
-netscape-cert-extension 13 : nsComment		: Netscape Comment
-!Cname netscape-cert-sequence
-netscape-data-type 5	: nsCertSequence	: Netscape Certificate Sequence
-!Cname ns-sgc
-netscape 4 1		: nsSGC			: Netscape Server Gated Crypto
-
-# iso(1)
-iso 3			: ORG			: org
-org 6			: DOD			: dod
-dod 1			: IANA			: iana
-!Alias internet iana
-
-internet 1		: directory		: Directory
-internet 2		: mgmt			: Management
-internet 3		: experimental		: Experimental
-internet 4		: private		: Private
-internet 5		: security		: Security
-internet 6		: snmpv2		: SNMPv2
-# Documents refer to "internet 7" as "mail". This however leads to ambiguities
-# with RFC2798, Section 9.1.3, where "mail" is defined as the short name for
-# rfc822Mailbox. The short name is therefore here left out for a reason.
-# Subclasses of "mail", e.g. "MIME MHS" don't consitute a problem, as
-# references are realized via long name "Mail" (with capital M).
-internet 7		:			: Mail
-
-Private 1		: enterprises		: Enterprises
-
-# RFC 2247
-Enterprises 1466 344	: dcobject		: dcObject
-
-# RFC 1495
-Mail 1			: mime-mhs		: MIME MHS
-mime-mhs 1		: mime-mhs-headings	: mime-mhs-headings
-mime-mhs 2		: mime-mhs-bodies	: mime-mhs-bodies
-mime-mhs-headings 1	: id-hex-partial-message : id-hex-partial-message
-mime-mhs-headings 2	: id-hex-multipart-message : id-hex-multipart-message
-
-# What the hell are these OIDs, really?
-!Cname rle-compression
-1 1 1 1 666 1		: RLE			: run length compression
-!Cname zlib-compression
-1 1 1 1 666 2		: ZLIB			: zlib compression
-
-# AES aka Rijndael
-
-!Alias csor 2 16 840 1 101 3
-!Alias nistAlgorithms csor 4
-!Alias aes nistAlgorithms 1
-
-aes 1			: AES-128-ECB		: aes-128-ecb
-aes 2			: AES-128-CBC		: aes-128-cbc
-!Cname aes-128-ofb128
-aes 3			: AES-128-OFB		: aes-128-ofb
-!Cname aes-128-cfb128
-aes 4			: AES-128-CFB		: aes-128-cfb
-
-aes 21			: AES-192-ECB		: aes-192-ecb
-aes 22			: AES-192-CBC		: aes-192-cbc
-!Cname aes-192-ofb128
-aes 23			: AES-192-OFB		: aes-192-ofb
-!Cname aes-192-cfb128
-aes 24			: AES-192-CFB		: aes-192-cfb
-
-aes 41			: AES-256-ECB		: aes-256-ecb
-aes 42			: AES-256-CBC		: aes-256-cbc
-!Cname aes-256-ofb128
-aes 43			: AES-256-OFB		: aes-256-ofb
-!Cname aes-256-cfb128
-aes 44			: AES-256-CFB		: aes-256-cfb
-
-# There are no OIDs for these modes...
-
-			: AES-128-CFB1		: aes-128-cfb1
-			: AES-192-CFB1		: aes-192-cfb1
-			: AES-256-CFB1		: aes-256-cfb1
-			: AES-128-CFB8		: aes-128-cfb8
-			: AES-192-CFB8		: aes-192-cfb8
-			: AES-256-CFB8		: aes-256-cfb8
-			: DES-CFB1		: des-cfb1
-			: DES-CFB8		: des-cfb8
-			: DES-EDE3-CFB1		: des-ede3-cfb1
-			: DES-EDE3-CFB8		: des-ede3-cfb8
-
-# OIDs for SHA224, SHA256, SHA385 and SHA512, according to x9.84.
-!Alias nist_hashalgs nistAlgorithms 2
-nist_hashalgs 1		: SHA256		: sha256
-nist_hashalgs 2		: SHA384		: sha384
-nist_hashalgs 3		: SHA512		: sha512
-nist_hashalgs 4		: SHA224		: sha224
-
-# Hold instruction CRL entry extension
-!Cname hold-instruction-code
-id-ce 23		: holdInstructionCode	: Hold Instruction Code
-!Alias holdInstruction	X9-57 2
-!Cname hold-instruction-none
-holdInstruction 1	: holdInstructionNone	: Hold Instruction None
-!Cname hold-instruction-call-issuer
-holdInstruction 2	: holdInstructionCallIssuer : Hold Instruction Call Issuer
-!Cname hold-instruction-reject
-holdInstruction 3	: holdInstructionReject	: Hold Instruction Reject
-
-# OID's from ITU-T.  Most of this is defined in RFC 1274.  A couple of
-# them are also mentioned in RFC 2247
-itu-t 9			: data
-data 2342		: pss
-pss 19200300		: ucl
-ucl 100			: pilot
-pilot 1			:			: pilotAttributeType
-pilot 3			:			: pilotAttributeSyntax
-pilot 4			:			: pilotObjectClass
-pilot 10		:			: pilotGroups
-pilotAttributeSyntax 4	:			: iA5StringSyntax
-pilotAttributeSyntax 5	:			: caseIgnoreIA5StringSyntax
-pilotObjectClass 3	:			: pilotObject
-pilotObjectClass 4	:			: pilotPerson
-pilotObjectClass 5	: account
-pilotObjectClass 6	: document
-pilotObjectClass 7	: room
-pilotObjectClass 9	:			: documentSeries
-pilotObjectClass 13	: domain		: Domain
-pilotObjectClass 14	:			: rFC822localPart
-pilotObjectClass 15	:			: dNSDomain
-pilotObjectClass 17	:			: domainRelatedObject
-pilotObjectClass 18	:			: friendlyCountry
-pilotObjectClass 19	:			: simpleSecurityObject
-pilotObjectClass 20	:			: pilotOrganization
-pilotObjectClass 21	:			: pilotDSA
-pilotObjectClass 22	:			: qualityLabelledData
-pilotAttributeType 1	: UID			: userId
-pilotAttributeType 2	:			: textEncodedORAddress
-pilotAttributeType 3	: mail			: rfc822Mailbox
-pilotAttributeType 4	: info
-pilotAttributeType 5	:			: favouriteDrink
-pilotAttributeType 6	:			: roomNumber
-pilotAttributeType 7	: photo
-pilotAttributeType 8	:			: userClass
-pilotAttributeType 9	: host
-pilotAttributeType 10	: manager
-pilotAttributeType 11	:			: documentIdentifier
-pilotAttributeType 12	:			: documentTitle
-pilotAttributeType 13	:			: documentVersion
-pilotAttributeType 14	:			: documentAuthor
-pilotAttributeType 15	:			: documentLocation
-pilotAttributeType 20	:			: homeTelephoneNumber
-pilotAttributeType 21	: secretary
-pilotAttributeType 22	:			: otherMailbox
-pilotAttributeType 23	:			: lastModifiedTime
-pilotAttributeType 24	:			: lastModifiedBy
-pilotAttributeType 25	: DC			: domainComponent
-pilotAttributeType 26	:			: aRecord
-pilotAttributeType 27	:			: pilotAttributeType27
-pilotAttributeType 28	:			: mXRecord
-pilotAttributeType 29	:			: nSRecord
-pilotAttributeType 30	:			: sOARecord
-pilotAttributeType 31	:			: cNAMERecord
-pilotAttributeType 37	:			: associatedDomain
-pilotAttributeType 38	:			: associatedName
-pilotAttributeType 39	:			: homePostalAddress
-pilotAttributeType 40	:			: personalTitle
-pilotAttributeType 41	:			: mobileTelephoneNumber
-pilotAttributeType 42	:			: pagerTelephoneNumber
-pilotAttributeType 43	:			: friendlyCountryName
-# The following clashes with 2.5.4.45, so commented away
-#pilotAttributeType 44	: uid			: uniqueIdentifier
-pilotAttributeType 45	:			: organizationalStatus
-pilotAttributeType 46	:			: janetMailbox
-pilotAttributeType 47	:			: mailPreferenceOption
-pilotAttributeType 48	:			: buildingName
-pilotAttributeType 49	:			: dSAQuality
-pilotAttributeType 50	:			: singleLevelQuality
-pilotAttributeType 51	:			: subtreeMinimumQuality
-pilotAttributeType 52	:			: subtreeMaximumQuality
-pilotAttributeType 53	:			: personalSignature
-pilotAttributeType 54	:			: dITRedirect
-pilotAttributeType 55	: audio
-pilotAttributeType 56	:			: documentPublisher
-
-international-organizations 42	: id-set	: Secure Electronic Transactions
-
-id-set 0		: set-ctype		: content types
-id-set 1		: set-msgExt		: message extensions
-id-set 3		: set-attr
-id-set 5		: set-policy
-id-set 7		: set-certExt		: certificate extensions
-id-set 8		: set-brand
-
-set-ctype 0		: setct-PANData
-set-ctype 1		: setct-PANToken
-set-ctype 2		: setct-PANOnly
-set-ctype 3		: setct-OIData
-set-ctype 4		: setct-PI
-set-ctype 5		: setct-PIData
-set-ctype 6		: setct-PIDataUnsigned
-set-ctype 7		: setct-HODInput
-set-ctype 8		: setct-AuthResBaggage
-set-ctype 9		: setct-AuthRevReqBaggage
-set-ctype 10		: setct-AuthRevResBaggage
-set-ctype 11		: setct-CapTokenSeq
-set-ctype 12		: setct-PInitResData
-set-ctype 13		: setct-PI-TBS
-set-ctype 14		: setct-PResData
-set-ctype 16		: setct-AuthReqTBS
-set-ctype 17		: setct-AuthResTBS
-set-ctype 18		: setct-AuthResTBSX
-set-ctype 19		: setct-AuthTokenTBS
-set-ctype 20		: setct-CapTokenData
-set-ctype 21		: setct-CapTokenTBS
-set-ctype 22		: setct-AcqCardCodeMsg
-set-ctype 23		: setct-AuthRevReqTBS
-set-ctype 24		: setct-AuthRevResData
-set-ctype 25		: setct-AuthRevResTBS
-set-ctype 26		: setct-CapReqTBS
-set-ctype 27		: setct-CapReqTBSX
-set-ctype 28		: setct-CapResData
-set-ctype 29		: setct-CapRevReqTBS
-set-ctype 30		: setct-CapRevReqTBSX
-set-ctype 31		: setct-CapRevResData
-set-ctype 32		: setct-CredReqTBS
-set-ctype 33		: setct-CredReqTBSX
-set-ctype 34		: setct-CredResData
-set-ctype 35		: setct-CredRevReqTBS
-set-ctype 36		: setct-CredRevReqTBSX
-set-ctype 37		: setct-CredRevResData
-set-ctype 38		: setct-PCertReqData
-set-ctype 39		: setct-PCertResTBS
-set-ctype 40		: setct-BatchAdminReqData
-set-ctype 41		: setct-BatchAdminResData
-set-ctype 42		: setct-CardCInitResTBS
-set-ctype 43		: setct-MeAqCInitResTBS
-set-ctype 44		: setct-RegFormResTBS
-set-ctype 45		: setct-CertReqData
-set-ctype 46		: setct-CertReqTBS
-set-ctype 47		: setct-CertResData
-set-ctype 48		: setct-CertInqReqTBS
-set-ctype 49		: setct-ErrorTBS
-set-ctype 50		: setct-PIDualSignedTBE
-set-ctype 51		: setct-PIUnsignedTBE
-set-ctype 52		: setct-AuthReqTBE
-set-ctype 53		: setct-AuthResTBE
-set-ctype 54		: setct-AuthResTBEX
-set-ctype 55		: setct-AuthTokenTBE
-set-ctype 56		: setct-CapTokenTBE
-set-ctype 57		: setct-CapTokenTBEX
-set-ctype 58		: setct-AcqCardCodeMsgTBE
-set-ctype 59		: setct-AuthRevReqTBE
-set-ctype 60		: setct-AuthRevResTBE
-set-ctype 61		: setct-AuthRevResTBEB
-set-ctype 62		: setct-CapReqTBE
-set-ctype 63		: setct-CapReqTBEX
-set-ctype 64		: setct-CapResTBE
-set-ctype 65		: setct-CapRevReqTBE
-set-ctype 66		: setct-CapRevReqTBEX
-set-ctype 67		: setct-CapRevResTBE
-set-ctype 68		: setct-CredReqTBE
-set-ctype 69		: setct-CredReqTBEX
-set-ctype 70		: setct-CredResTBE
-set-ctype 71		: setct-CredRevReqTBE
-set-ctype 72		: setct-CredRevReqTBEX
-set-ctype 73		: setct-CredRevResTBE
-set-ctype 74		: setct-BatchAdminReqTBE
-set-ctype 75		: setct-BatchAdminResTBE
-set-ctype 76		: setct-RegFormReqTBE
-set-ctype 77		: setct-CertReqTBE
-set-ctype 78		: setct-CertReqTBEX
-set-ctype 79		: setct-CertResTBE
-set-ctype 80		: setct-CRLNotificationTBS
-set-ctype 81		: setct-CRLNotificationResTBS
-set-ctype 82		: setct-BCIDistributionTBS
-
-set-msgExt 1		: setext-genCrypt	: generic cryptogram
-set-msgExt 3		: setext-miAuth		: merchant initiated auth
-set-msgExt 4		: setext-pinSecure
-set-msgExt 5		: setext-pinAny
-set-msgExt 7		: setext-track2
-set-msgExt 8		: setext-cv		: additional verification
-
-set-policy 0		: set-policy-root
-
-set-certExt 0		: setCext-hashedRoot
-set-certExt 1		: setCext-certType
-set-certExt 2		: setCext-merchData
-set-certExt 3		: setCext-cCertRequired
-set-certExt 4		: setCext-tunneling
-set-certExt 5		: setCext-setExt
-set-certExt 6		: setCext-setQualf
-set-certExt 7		: setCext-PGWYcapabilities
-set-certExt 8		: setCext-TokenIdentifier
-set-certExt 9		: setCext-Track2Data
-set-certExt 10		: setCext-TokenType
-set-certExt 11		: setCext-IssuerCapabilities
-
-set-attr 0		: setAttr-Cert
-set-attr 1		: setAttr-PGWYcap	: payment gateway capabilities
-set-attr 2		: setAttr-TokenType
-set-attr 3		: setAttr-IssCap	: issuer capabilities
-
-setAttr-Cert 0		: set-rootKeyThumb
-setAttr-Cert 1		: set-addPolicy
-
-setAttr-TokenType 1	: setAttr-Token-EMV
-setAttr-TokenType 2	: setAttr-Token-B0Prime
-
-setAttr-IssCap 3	: setAttr-IssCap-CVM
-setAttr-IssCap 4	: setAttr-IssCap-T2
-setAttr-IssCap 5	: setAttr-IssCap-Sig
-
-setAttr-IssCap-CVM 1	: setAttr-GenCryptgrm	: generate cryptogram
-setAttr-IssCap-T2 1	: setAttr-T2Enc		: encrypted track 2
-setAttr-IssCap-T2 2	: setAttr-T2cleartxt	: cleartext track 2
-
-setAttr-IssCap-Sig 1	: setAttr-TokICCsig	: ICC or token signature
-setAttr-IssCap-Sig 2	: setAttr-SecDevSig	: secure device signature
-
-set-brand 1		: set-brand-IATA-ATA
-set-brand 30		: set-brand-Diners
-set-brand 34		: set-brand-AmericanExpress
-set-brand 35		: set-brand-JCB
-set-brand 4		: set-brand-Visa
-set-brand 5		: set-brand-MasterCard
-set-brand 6011		: set-brand-Novus
-
-rsadsi 3 10		: DES-CDMF		: des-cdmf
-rsadsi 1 1 6		: rsaOAEPEncryptionSET
-
-			: Oakley-EC2N-3		: ipsec3
-			: Oakley-EC2N-4		: ipsec4
-
-
-# Definitions for Camellia cipher - CBC MODE
-1 2 392 200011 61 1 1 1 2 : CAMELLIA-128-CBC		: camellia-128-cbc
-1 2 392 200011 61 1 1 1 3 : CAMELLIA-192-CBC		: camellia-192-cbc
-1 2 392 200011 61 1 1 1 4 : CAMELLIA-256-CBC		: camellia-256-cbc
-
-# Definitions for Camellia cipher - ECB, CFB, OFB MODE
-!Alias ntt-ds 0 3 4401 5
-!Alias camellia ntt-ds 3 1 9 
-
-camellia 1		: CAMELLIA-128-ECB		: camellia-128-ecb
-!Cname camellia-128-ofb128
-camellia 3		: CAMELLIA-128-OFB		: camellia-128-ofb
-!Cname camellia-128-cfb128
-camellia 4		: CAMELLIA-128-CFB		: camellia-128-cfb
-
-camellia 21		: CAMELLIA-192-ECB		: camellia-192-ecb
-!Cname camellia-192-ofb128
-camellia 23		: CAMELLIA-192-OFB		: camellia-192-ofb
-!Cname camellia-192-cfb128
-camellia 24		: CAMELLIA-192-CFB		: camellia-192-cfb
-
-camellia 41		: CAMELLIA-256-ECB		: camellia-256-ecb
-!Cname camellia-256-ofb128
-camellia 43		: CAMELLIA-256-OFB		: camellia-256-ofb
-!Cname camellia-256-cfb128
-camellia 44		: CAMELLIA-256-CFB		: camellia-256-cfb
-
-# There are no OIDs for these modes...
-
-			: CAMELLIA-128-CFB1		: camellia-128-cfb1
-			: CAMELLIA-192-CFB1		: camellia-192-cfb1
-			: CAMELLIA-256-CFB1		: camellia-256-cfb1
-			: CAMELLIA-128-CFB8		: camellia-128-cfb8
-			: CAMELLIA-192-CFB8		: camellia-192-cfb8
-			: CAMELLIA-256-CFB8		: camellia-256-cfb8
-
diff --git a/crypto/openssl/crypto/ocsp/Makefile b/crypto/openssl/crypto/ocsp/Makefile
deleted file mode 100644
index 0fe028960e25..000000000000
--- a/crypto/openssl/crypto/ocsp/Makefile
+++ /dev/null
@@ -1,213 +0,0 @@
-#
-# OpenSSL/ocsp/Makefile
-#
-
-DIR=	ocsp
-TOP=	../..
-CC=	cc
-INCLUDES= -I.. -I$(TOP) -I../../include
-CFLAG=-g
-MAKEFILE=	Makefile
-AR=		ar r
-
-CFLAGS= $(INCLUDES) $(CFLAG)
-
-GENERAL=Makefile README
-TEST=
-APPS=
-
-LIB=$(TOP)/libcrypto.a
-LIBSRC= ocsp_asn.c ocsp_ext.c ocsp_ht.c ocsp_lib.c ocsp_cl.c \
-	ocsp_srv.c ocsp_prn.c ocsp_vfy.c ocsp_err.c
-
-LIBOBJ= ocsp_asn.o ocsp_ext.o ocsp_ht.o ocsp_lib.o ocsp_cl.o \
-	ocsp_srv.o ocsp_prn.o ocsp_vfy.o ocsp_err.o
-
-SRC= $(LIBSRC)
-
-EXHEADER= ocsp.h
-HEADER=	$(EXHEADER)
-
-ALL=    $(GENERAL) $(SRC) $(HEADER)
-
-top:
-	(cd ../..; $(MAKE) DIRS=crypto SDIRS=$(DIR) sub_all)
-
-all:	lib
-
-lib:	$(LIBOBJ)
-	$(AR) $(LIB) $(LIBOBJ)
-	$(RANLIB) $(LIB) || echo Never mind.
-	@touch lib
-
-files:
-	$(PERL) $(TOP)/util/files.pl Makefile >> $(TOP)/MINFO
-
-links:
-	@$(PERL) $(TOP)/util/mklink.pl ../../include/openssl $(EXHEADER)
-	@$(PERL) $(TOP)/util/mklink.pl ../../test $(TEST)
-	@$(PERL) $(TOP)/util/mklink.pl ../../apps $(APPS)
-
-install:
-	@[ -n "$(INSTALLTOP)" ] # should be set by top Makefile...
-	@headerlist="$(EXHEADER)"; for i in $$headerlist ; \
-	do  \
-	(cp $$i $(INSTALL_PREFIX)$(INSTALLTOP)/include/openssl/$$i; \
-	chmod 644 $(INSTALL_PREFIX)$(INSTALLTOP)/include/openssl/$$i ); \
-	done;
-
-tags:
-	ctags $(SRC)
-
-tests:
-
-lint:
-	lint -DLINT $(INCLUDES) $(SRC)>fluff
-
-depend:
-	@[ -n "$(MAKEDEPEND)" ] # should be set by upper Makefile...
-	$(MAKEDEPEND) -- $(CFLAG) $(INCLUDES) $(DEPFLAG) -- $(LIBSRC)
-
-dclean:
-	$(PERL) -pe 'if (/^# DO NOT DELETE THIS LINE/) {print; exit(0);}' $(MAKEFILE) >Makefile.new
-	mv -f Makefile.new $(MAKEFILE)
-
-clean:
-	rm -f *.o *.obj lib tags core .pure .nfs* *.old *.bak fluff
-
-# DO NOT DELETE THIS LINE -- make depend depends on it.
-
-ocsp_asn.o: ../../include/openssl/asn1.h ../../include/openssl/asn1t.h
-ocsp_asn.o: ../../include/openssl/bio.h ../../include/openssl/buffer.h
-ocsp_asn.o: ../../include/openssl/conf.h ../../include/openssl/crypto.h
-ocsp_asn.o: ../../include/openssl/e_os2.h ../../include/openssl/ec.h
-ocsp_asn.o: ../../include/openssl/ecdh.h ../../include/openssl/ecdsa.h
-ocsp_asn.o: ../../include/openssl/evp.h ../../include/openssl/lhash.h
-ocsp_asn.o: ../../include/openssl/obj_mac.h ../../include/openssl/objects.h
-ocsp_asn.o: ../../include/openssl/ocsp.h ../../include/openssl/opensslconf.h
-ocsp_asn.o: ../../include/openssl/opensslv.h ../../include/openssl/ossl_typ.h
-ocsp_asn.o: ../../include/openssl/pkcs7.h ../../include/openssl/safestack.h
-ocsp_asn.o: ../../include/openssl/sha.h ../../include/openssl/stack.h
-ocsp_asn.o: ../../include/openssl/symhacks.h ../../include/openssl/x509.h
-ocsp_asn.o: ../../include/openssl/x509_vfy.h ../../include/openssl/x509v3.h
-ocsp_asn.o: ocsp_asn.c
-ocsp_cl.o: ../../e_os.h ../../include/openssl/asn1.h
-ocsp_cl.o: ../../include/openssl/bio.h ../../include/openssl/buffer.h
-ocsp_cl.o: ../../include/openssl/conf.h ../../include/openssl/crypto.h
-ocsp_cl.o: ../../include/openssl/e_os2.h ../../include/openssl/ec.h
-ocsp_cl.o: ../../include/openssl/ecdh.h ../../include/openssl/ecdsa.h
-ocsp_cl.o: ../../include/openssl/err.h ../../include/openssl/evp.h
-ocsp_cl.o: ../../include/openssl/lhash.h ../../include/openssl/obj_mac.h
-ocsp_cl.o: ../../include/openssl/objects.h ../../include/openssl/ocsp.h
-ocsp_cl.o: ../../include/openssl/opensslconf.h ../../include/openssl/opensslv.h
-ocsp_cl.o: ../../include/openssl/ossl_typ.h ../../include/openssl/pem.h
-ocsp_cl.o: ../../include/openssl/pem2.h ../../include/openssl/pkcs7.h
-ocsp_cl.o: ../../include/openssl/rand.h ../../include/openssl/safestack.h
-ocsp_cl.o: ../../include/openssl/sha.h ../../include/openssl/stack.h
-ocsp_cl.o: ../../include/openssl/symhacks.h ../../include/openssl/x509.h
-ocsp_cl.o: ../../include/openssl/x509_vfy.h ../../include/openssl/x509v3.h
-ocsp_cl.o: ../cryptlib.h ocsp_cl.c
-ocsp_err.o: ../../include/openssl/asn1.h ../../include/openssl/bio.h
-ocsp_err.o: ../../include/openssl/buffer.h ../../include/openssl/conf.h
-ocsp_err.o: ../../include/openssl/crypto.h ../../include/openssl/e_os2.h
-ocsp_err.o: ../../include/openssl/ec.h ../../include/openssl/ecdh.h
-ocsp_err.o: ../../include/openssl/ecdsa.h ../../include/openssl/err.h
-ocsp_err.o: ../../include/openssl/evp.h ../../include/openssl/lhash.h
-ocsp_err.o: ../../include/openssl/obj_mac.h ../../include/openssl/objects.h
-ocsp_err.o: ../../include/openssl/ocsp.h ../../include/openssl/opensslconf.h
-ocsp_err.o: ../../include/openssl/opensslv.h ../../include/openssl/ossl_typ.h
-ocsp_err.o: ../../include/openssl/pkcs7.h ../../include/openssl/safestack.h
-ocsp_err.o: ../../include/openssl/sha.h ../../include/openssl/stack.h
-ocsp_err.o: ../../include/openssl/symhacks.h ../../include/openssl/x509.h
-ocsp_err.o: ../../include/openssl/x509_vfy.h ../../include/openssl/x509v3.h
-ocsp_err.o: ocsp_err.c
-ocsp_ext.o: ../../e_os.h ../../include/openssl/asn1.h
-ocsp_ext.o: ../../include/openssl/bio.h ../../include/openssl/buffer.h
-ocsp_ext.o: ../../include/openssl/conf.h ../../include/openssl/crypto.h
-ocsp_ext.o: ../../include/openssl/e_os2.h ../../include/openssl/ec.h
-ocsp_ext.o: ../../include/openssl/ecdh.h ../../include/openssl/ecdsa.h
-ocsp_ext.o: ../../include/openssl/err.h ../../include/openssl/evp.h
-ocsp_ext.o: ../../include/openssl/lhash.h ../../include/openssl/obj_mac.h
-ocsp_ext.o: ../../include/openssl/objects.h ../../include/openssl/ocsp.h
-ocsp_ext.o: ../../include/openssl/opensslconf.h
-ocsp_ext.o: ../../include/openssl/opensslv.h ../../include/openssl/ossl_typ.h
-ocsp_ext.o: ../../include/openssl/pkcs7.h ../../include/openssl/rand.h
-ocsp_ext.o: ../../include/openssl/safestack.h ../../include/openssl/sha.h
-ocsp_ext.o: ../../include/openssl/stack.h ../../include/openssl/symhacks.h
-ocsp_ext.o: ../../include/openssl/x509.h ../../include/openssl/x509_vfy.h
-ocsp_ext.o: ../../include/openssl/x509v3.h ../cryptlib.h ocsp_ext.c
-ocsp_ht.o: ../../include/openssl/asn1.h ../../include/openssl/bio.h
-ocsp_ht.o: ../../include/openssl/buffer.h ../../include/openssl/conf.h
-ocsp_ht.o: ../../include/openssl/crypto.h ../../include/openssl/e_os2.h
-ocsp_ht.o: ../../include/openssl/ec.h ../../include/openssl/ecdh.h
-ocsp_ht.o: ../../include/openssl/ecdsa.h ../../include/openssl/err.h
-ocsp_ht.o: ../../include/openssl/evp.h ../../include/openssl/lhash.h
-ocsp_ht.o: ../../include/openssl/obj_mac.h ../../include/openssl/objects.h
-ocsp_ht.o: ../../include/openssl/ocsp.h ../../include/openssl/opensslconf.h
-ocsp_ht.o: ../../include/openssl/opensslv.h ../../include/openssl/ossl_typ.h
-ocsp_ht.o: ../../include/openssl/pkcs7.h ../../include/openssl/safestack.h
-ocsp_ht.o: ../../include/openssl/sha.h ../../include/openssl/stack.h
-ocsp_ht.o: ../../include/openssl/symhacks.h ../../include/openssl/x509.h
-ocsp_ht.o: ../../include/openssl/x509_vfy.h ../../include/openssl/x509v3.h
-ocsp_ht.o: ocsp_ht.c
-ocsp_lib.o: ../../e_os.h ../../include/openssl/asn1.h
-ocsp_lib.o: ../../include/openssl/bio.h ../../include/openssl/buffer.h
-ocsp_lib.o: ../../include/openssl/conf.h ../../include/openssl/crypto.h
-ocsp_lib.o: ../../include/openssl/e_os2.h ../../include/openssl/ec.h
-ocsp_lib.o: ../../include/openssl/ecdh.h ../../include/openssl/ecdsa.h
-ocsp_lib.o: ../../include/openssl/err.h ../../include/openssl/evp.h
-ocsp_lib.o: ../../include/openssl/lhash.h ../../include/openssl/obj_mac.h
-ocsp_lib.o: ../../include/openssl/objects.h ../../include/openssl/ocsp.h
-ocsp_lib.o: ../../include/openssl/opensslconf.h
-ocsp_lib.o: ../../include/openssl/opensslv.h ../../include/openssl/ossl_typ.h
-ocsp_lib.o: ../../include/openssl/pem.h ../../include/openssl/pem2.h
-ocsp_lib.o: ../../include/openssl/pkcs7.h ../../include/openssl/rand.h
-ocsp_lib.o: ../../include/openssl/safestack.h ../../include/openssl/sha.h
-ocsp_lib.o: ../../include/openssl/stack.h ../../include/openssl/symhacks.h
-ocsp_lib.o: ../../include/openssl/x509.h ../../include/openssl/x509_vfy.h
-ocsp_lib.o: ../../include/openssl/x509v3.h ../cryptlib.h ocsp_lib.c
-ocsp_prn.o: ../../include/openssl/asn1.h ../../include/openssl/bio.h
-ocsp_prn.o: ../../include/openssl/buffer.h ../../include/openssl/conf.h
-ocsp_prn.o: ../../include/openssl/crypto.h ../../include/openssl/e_os2.h
-ocsp_prn.o: ../../include/openssl/ec.h ../../include/openssl/ecdh.h
-ocsp_prn.o: ../../include/openssl/ecdsa.h ../../include/openssl/err.h
-ocsp_prn.o: ../../include/openssl/evp.h ../../include/openssl/lhash.h
-ocsp_prn.o: ../../include/openssl/obj_mac.h ../../include/openssl/objects.h
-ocsp_prn.o: ../../include/openssl/ocsp.h ../../include/openssl/opensslconf.h
-ocsp_prn.o: ../../include/openssl/opensslv.h ../../include/openssl/ossl_typ.h
-ocsp_prn.o: ../../include/openssl/pem.h ../../include/openssl/pem2.h
-ocsp_prn.o: ../../include/openssl/pkcs7.h ../../include/openssl/safestack.h
-ocsp_prn.o: ../../include/openssl/sha.h ../../include/openssl/stack.h
-ocsp_prn.o: ../../include/openssl/symhacks.h ../../include/openssl/x509.h
-ocsp_prn.o: ../../include/openssl/x509_vfy.h ../../include/openssl/x509v3.h
-ocsp_prn.o: ocsp_prn.c
-ocsp_srv.o: ../../e_os.h ../../include/openssl/asn1.h
-ocsp_srv.o: ../../include/openssl/bio.h ../../include/openssl/buffer.h
-ocsp_srv.o: ../../include/openssl/conf.h ../../include/openssl/crypto.h
-ocsp_srv.o: ../../include/openssl/e_os2.h ../../include/openssl/ec.h
-ocsp_srv.o: ../../include/openssl/ecdh.h ../../include/openssl/ecdsa.h
-ocsp_srv.o: ../../include/openssl/err.h ../../include/openssl/evp.h
-ocsp_srv.o: ../../include/openssl/lhash.h ../../include/openssl/obj_mac.h
-ocsp_srv.o: ../../include/openssl/objects.h ../../include/openssl/ocsp.h
-ocsp_srv.o: ../../include/openssl/opensslconf.h
-ocsp_srv.o: ../../include/openssl/opensslv.h ../../include/openssl/ossl_typ.h
-ocsp_srv.o: ../../include/openssl/pem.h ../../include/openssl/pem2.h
-ocsp_srv.o: ../../include/openssl/pkcs7.h ../../include/openssl/rand.h
-ocsp_srv.o: ../../include/openssl/safestack.h ../../include/openssl/sha.h
-ocsp_srv.o: ../../include/openssl/stack.h ../../include/openssl/symhacks.h
-ocsp_srv.o: ../../include/openssl/x509.h ../../include/openssl/x509_vfy.h
-ocsp_srv.o: ../../include/openssl/x509v3.h ../cryptlib.h ocsp_srv.c
-ocsp_vfy.o: ../../include/openssl/asn1.h ../../include/openssl/bio.h
-ocsp_vfy.o: ../../include/openssl/buffer.h ../../include/openssl/conf.h
-ocsp_vfy.o: ../../include/openssl/crypto.h ../../include/openssl/e_os2.h
-ocsp_vfy.o: ../../include/openssl/ec.h ../../include/openssl/ecdh.h
-ocsp_vfy.o: ../../include/openssl/ecdsa.h ../../include/openssl/err.h
-ocsp_vfy.o: ../../include/openssl/evp.h ../../include/openssl/lhash.h
-ocsp_vfy.o: ../../include/openssl/obj_mac.h ../../include/openssl/objects.h
-ocsp_vfy.o: ../../include/openssl/ocsp.h ../../include/openssl/opensslconf.h
-ocsp_vfy.o: ../../include/openssl/opensslv.h ../../include/openssl/ossl_typ.h
-ocsp_vfy.o: ../../include/openssl/pkcs7.h ../../include/openssl/safestack.h
-ocsp_vfy.o: ../../include/openssl/sha.h ../../include/openssl/stack.h
-ocsp_vfy.o: ../../include/openssl/symhacks.h ../../include/openssl/x509.h
-ocsp_vfy.o: ../../include/openssl/x509_vfy.h ../../include/openssl/x509v3.h
-ocsp_vfy.o: ocsp_vfy.c
diff --git a/crypto/openssl/crypto/ocsp/ocsp.h b/crypto/openssl/crypto/ocsp/ocsp.h
deleted file mode 100644
index 53f3364af0c4..000000000000
--- a/crypto/openssl/crypto/ocsp/ocsp.h
+++ /dev/null
@@ -1,614 +0,0 @@
-/* ocsp.h */
-/* Written by Tom Titchener <Tom_Titchener@groove.net> for the OpenSSL
- * project. */
-
-/* History:
-   This file was transfered to Richard Levitte from CertCo by Kathy
-   Weinhold in mid-spring 2000 to be included in OpenSSL or released
-   as a patch kit. */
-
-/* ====================================================================
- * Copyright (c) 1998-2000 The OpenSSL Project.  All rights reserved.
- *
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions
- * are met:
- *
- * 1. Redistributions of source code must retain the above copyright
- *    notice, this list of conditions and the following disclaimer. 
- *
- * 2. Redistributions in binary form must reproduce the above copyright
- *    notice, this list of conditions and the following disclaimer in
- *    the documentation and/or other materials provided with the
- *    distribution.
- *
- * 3. All advertising materials mentioning features or use of this
- *    software must display the following acknowledgment:
- *    "This product includes software developed by the OpenSSL Project
- *    for use in the OpenSSL Toolkit. (http://www.openssl.org/)"
- *
- * 4. The names "OpenSSL Toolkit" and "OpenSSL Project" must not be used to
- *    endorse or promote products derived from this software without
- *    prior written permission. For written permission, please contact
- *    openssl-core@openssl.org.
- *
- * 5. Products derived from this software may not be called "OpenSSL"
- *    nor may "OpenSSL" appear in their names without prior written
- *    permission of the OpenSSL Project.
- *
- * 6. Redistributions of any form whatsoever must retain the following
- *    acknowledgment:
- *    "This product includes software developed by the OpenSSL Project
- *    for use in the OpenSSL Toolkit (http://www.openssl.org/)"
- *
- * THIS SOFTWARE IS PROVIDED BY THE OpenSSL PROJECT ``AS IS'' AND ANY
- * EXPRESSED OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
- * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR
- * PURPOSE ARE DISCLAIMED.  IN NO EVENT SHALL THE OpenSSL PROJECT OR
- * ITS CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
- * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
- * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
- * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
- * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
- * STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
- * ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED
- * OF THE POSSIBILITY OF SUCH DAMAGE.
- * ====================================================================
- *
- * This product includes cryptographic software written by Eric Young
- * (eay@cryptsoft.com).  This product includes software written by Tim
- * Hudson (tjh@cryptsoft.com).
- *
- */
-
-#ifndef HEADER_OCSP_H
-#define HEADER_OCSP_H
-
-#include <openssl/x509.h>
-#include <openssl/x509v3.h>
-#include <openssl/safestack.h>
-
-#ifdef  __cplusplus
-extern "C" {
-#endif
-
-/* Various flags and values */
-
-#define OCSP_DEFAULT_NONCE_LENGTH	16
-
-#define OCSP_NOCERTS			0x1
-#define OCSP_NOINTERN			0x2
-#define OCSP_NOSIGS			0x4
-#define OCSP_NOCHAIN			0x8
-#define OCSP_NOVERIFY			0x10
-#define OCSP_NOEXPLICIT			0x20
-#define OCSP_NOCASIGN			0x40
-#define OCSP_NODELEGATED		0x80
-#define OCSP_NOCHECKS			0x100
-#define OCSP_TRUSTOTHER			0x200
-#define OCSP_RESPID_KEY			0x400
-#define OCSP_NOTIME			0x800
-
-/*   CertID ::= SEQUENCE {
- *       hashAlgorithm            AlgorithmIdentifier,
- *       issuerNameHash     OCTET STRING, -- Hash of Issuer's DN
- *       issuerKeyHash      OCTET STRING, -- Hash of Issuers public key (excluding the tag & length fields)
- *       serialNumber       CertificateSerialNumber }
- */
-typedef struct ocsp_cert_id_st
-	{
-	X509_ALGOR *hashAlgorithm;
-	ASN1_OCTET_STRING *issuerNameHash;
-	ASN1_OCTET_STRING *issuerKeyHash;
-	ASN1_INTEGER *serialNumber;
-	} OCSP_CERTID;
-
-DECLARE_STACK_OF(OCSP_CERTID)
-
-/*   Request ::=     SEQUENCE {
- *       reqCert                    CertID,
- *       singleRequestExtensions    [0] EXPLICIT Extensions OPTIONAL }
- */
-typedef struct ocsp_one_request_st
-	{
-	OCSP_CERTID *reqCert;
-	STACK_OF(X509_EXTENSION) *singleRequestExtensions;
-	} OCSP_ONEREQ;
-
-DECLARE_STACK_OF(OCSP_ONEREQ)
-DECLARE_ASN1_SET_OF(OCSP_ONEREQ)
-
-
-/*   TBSRequest      ::=     SEQUENCE {
- *       version             [0] EXPLICIT Version DEFAULT v1,
- *       requestorName       [1] EXPLICIT GeneralName OPTIONAL,
- *       requestList             SEQUENCE OF Request,
- *       requestExtensions   [2] EXPLICIT Extensions OPTIONAL }
- */
-typedef struct ocsp_req_info_st
-	{
-	ASN1_INTEGER *version;
-	GENERAL_NAME *requestorName;
-	STACK_OF(OCSP_ONEREQ) *requestList;
-	STACK_OF(X509_EXTENSION) *requestExtensions;
-	} OCSP_REQINFO;
-
-/*   Signature       ::=     SEQUENCE {
- *       signatureAlgorithm   AlgorithmIdentifier,
- *       signature            BIT STRING,
- *       certs                [0] EXPLICIT SEQUENCE OF Certificate OPTIONAL }
- */
-typedef struct ocsp_signature_st
-	{
-	X509_ALGOR *signatureAlgorithm;
-	ASN1_BIT_STRING *signature;
-	STACK_OF(X509) *certs;
-	} OCSP_SIGNATURE;
-
-/*   OCSPRequest     ::=     SEQUENCE {
- *       tbsRequest                  TBSRequest,
- *       optionalSignature   [0]     EXPLICIT Signature OPTIONAL }
- */
-typedef struct ocsp_request_st
-	{
-	OCSP_REQINFO *tbsRequest;
-	OCSP_SIGNATURE *optionalSignature; /* OPTIONAL */
-	} OCSP_REQUEST;
-
-/*   OCSPResponseStatus ::= ENUMERATED {
- *       successful            (0),      --Response has valid confirmations
- *       malformedRequest      (1),      --Illegal confirmation request
- *       internalError         (2),      --Internal error in issuer
- *       tryLater              (3),      --Try again later
- *                                       --(4) is not used
- *       sigRequired           (5),      --Must sign the request
- *       unauthorized          (6)       --Request unauthorized
- *   }
- */
-#define OCSP_RESPONSE_STATUS_SUCCESSFUL          0
-#define OCSP_RESPONSE_STATUS_MALFORMEDREQUEST     1
-#define OCSP_RESPONSE_STATUS_INTERNALERROR        2
-#define OCSP_RESPONSE_STATUS_TRYLATER             3
-#define OCSP_RESPONSE_STATUS_SIGREQUIRED          5
-#define OCSP_RESPONSE_STATUS_UNAUTHORIZED         6
-
-/*   ResponseBytes ::=       SEQUENCE {
- *       responseType   OBJECT IDENTIFIER,
- *       response       OCTET STRING }
- */
-typedef struct ocsp_resp_bytes_st
-	{
-	ASN1_OBJECT *responseType;
-	ASN1_OCTET_STRING *response;
-	} OCSP_RESPBYTES;
-
-/*   OCSPResponse ::= SEQUENCE {
- *      responseStatus         OCSPResponseStatus,
- *      responseBytes          [0] EXPLICIT ResponseBytes OPTIONAL }
- */
-typedef struct ocsp_response_st
-	{
-	ASN1_ENUMERATED *responseStatus;
-	OCSP_RESPBYTES  *responseBytes;
-	} OCSP_RESPONSE;
-
-/*   ResponderID ::= CHOICE {
- *      byName   [1] Name,
- *      byKey    [2] KeyHash }
- */
-#define V_OCSP_RESPID_NAME 0
-#define V_OCSP_RESPID_KEY  1
-typedef struct ocsp_responder_id_st
-	{
-	int type;
-	union   {
-		X509_NAME* byName;
-        	ASN1_OCTET_STRING *byKey;
-		} value;
-	} OCSP_RESPID;
-/*   KeyHash ::= OCTET STRING --SHA-1 hash of responder's public key
- *                            --(excluding the tag and length fields)
- */
-
-/*   RevokedInfo ::= SEQUENCE {
- *       revocationTime              GeneralizedTime,
- *       revocationReason    [0]     EXPLICIT CRLReason OPTIONAL }
- */
-typedef struct ocsp_revoked_info_st
-	{
-	ASN1_GENERALIZEDTIME *revocationTime;
-	ASN1_ENUMERATED *revocationReason;
-	} OCSP_REVOKEDINFO;
-
-/*   CertStatus ::= CHOICE {
- *       good                [0]     IMPLICIT NULL,
- *       revoked             [1]     IMPLICIT RevokedInfo,
- *       unknown             [2]     IMPLICIT UnknownInfo }
- */
-#define V_OCSP_CERTSTATUS_GOOD    0
-#define V_OCSP_CERTSTATUS_REVOKED 1
-#define V_OCSP_CERTSTATUS_UNKNOWN 2
-typedef struct ocsp_cert_status_st
-	{
-	int type;
-	union	{
-		ASN1_NULL *good;
-		OCSP_REVOKEDINFO *revoked;
-		ASN1_NULL *unknown;
-		} value;
-	} OCSP_CERTSTATUS;
-
-/*   SingleResponse ::= SEQUENCE {
- *      certID                       CertID,
- *      certStatus                   CertStatus,
- *      thisUpdate                   GeneralizedTime,
- *      nextUpdate           [0]     EXPLICIT GeneralizedTime OPTIONAL,
- *      singleExtensions     [1]     EXPLICIT Extensions OPTIONAL }
- */
-typedef struct ocsp_single_response_st
-	{
-	OCSP_CERTID *certId;
-	OCSP_CERTSTATUS *certStatus;
-	ASN1_GENERALIZEDTIME *thisUpdate;
-	ASN1_GENERALIZEDTIME *nextUpdate;
-	STACK_OF(X509_EXTENSION) *singleExtensions;
-	} OCSP_SINGLERESP;
-
-DECLARE_STACK_OF(OCSP_SINGLERESP)
-DECLARE_ASN1_SET_OF(OCSP_SINGLERESP)
-
-/*   ResponseData ::= SEQUENCE {
- *      version              [0] EXPLICIT Version DEFAULT v1,
- *      responderID              ResponderID,
- *      producedAt               GeneralizedTime,
- *      responses                SEQUENCE OF SingleResponse,
- *      responseExtensions   [1] EXPLICIT Extensions OPTIONAL }
- */
-typedef struct ocsp_response_data_st
-	{
-	ASN1_INTEGER *version;
-	OCSP_RESPID  *responderId;
-	ASN1_GENERALIZEDTIME *producedAt;
-	STACK_OF(OCSP_SINGLERESP) *responses;
-	STACK_OF(X509_EXTENSION) *responseExtensions;
-	} OCSP_RESPDATA;
-
-/*   BasicOCSPResponse       ::= SEQUENCE {
- *      tbsResponseData      ResponseData,
- *      signatureAlgorithm   AlgorithmIdentifier,
- *      signature            BIT STRING,
- *      certs                [0] EXPLICIT SEQUENCE OF Certificate OPTIONAL }
- */
-  /* Note 1:
-     The value for "signature" is specified in the OCSP rfc2560 as follows:
-     "The value for the signature SHALL be computed on the hash of the DER
-     encoding ResponseData."  This means that you must hash the DER-encoded
-     tbsResponseData, and then run it through a crypto-signing function, which
-     will (at least w/RSA) do a hash-'n'-private-encrypt operation.  This seems
-     a bit odd, but that's the spec.  Also note that the data structures do not
-     leave anywhere to independently specify the algorithm used for the initial
-     hash. So, we look at the signature-specification algorithm, and try to do
-     something intelligent.	-- Kathy Weinhold, CertCo */
-  /* Note 2:
-     It seems that the mentioned passage from RFC 2560 (section 4.2.1) is open
-     for interpretation.  I've done tests against another responder, and found
-     that it doesn't do the double hashing that the RFC seems to say one
-     should.  Therefore, all relevant functions take a flag saying which
-     variant should be used.	-- Richard Levitte, OpenSSL team and CeloCom */
-typedef struct ocsp_basic_response_st
-	{
-	OCSP_RESPDATA *tbsResponseData;
-	X509_ALGOR *signatureAlgorithm;
-	ASN1_BIT_STRING *signature;
-	STACK_OF(X509) *certs;
-	} OCSP_BASICRESP;
-
-/*
- *   CRLReason ::= ENUMERATED {
- *        unspecified             (0),
- *        keyCompromise           (1),
- *        cACompromise            (2),
- *        affiliationChanged      (3),
- *        superseded              (4),
- *        cessationOfOperation    (5),
- *        certificateHold         (6),
- *        removeFromCRL           (8) }
- */
-#define OCSP_REVOKED_STATUS_NOSTATUS               -1
-#define OCSP_REVOKED_STATUS_UNSPECIFIED             0
-#define OCSP_REVOKED_STATUS_KEYCOMPROMISE           1
-#define OCSP_REVOKED_STATUS_CACOMPROMISE            2
-#define OCSP_REVOKED_STATUS_AFFILIATIONCHANGED      3
-#define OCSP_REVOKED_STATUS_SUPERSEDED              4
-#define OCSP_REVOKED_STATUS_CESSATIONOFOPERATION    5
-#define OCSP_REVOKED_STATUS_CERTIFICATEHOLD         6
-#define OCSP_REVOKED_STATUS_REMOVEFROMCRL           8
-
-/* CrlID ::= SEQUENCE {
- *     crlUrl               [0]     EXPLICIT IA5String OPTIONAL,
- *     crlNum               [1]     EXPLICIT INTEGER OPTIONAL,
- *     crlTime              [2]     EXPLICIT GeneralizedTime OPTIONAL }
- */
-typedef struct ocsp_crl_id_st
-        {
-	ASN1_IA5STRING *crlUrl;
-	ASN1_INTEGER *crlNum;
-	ASN1_GENERALIZEDTIME *crlTime;
-        } OCSP_CRLID;
-
-/* ServiceLocator ::= SEQUENCE {
- *      issuer    Name,
- *      locator   AuthorityInfoAccessSyntax OPTIONAL }
- */
-typedef struct ocsp_service_locator_st
-        {
-	X509_NAME* issuer;
-	STACK_OF(ACCESS_DESCRIPTION) *locator;
-        } OCSP_SERVICELOC;
- 
-#define PEM_STRING_OCSP_REQUEST	"OCSP REQUEST"
-#define PEM_STRING_OCSP_RESPONSE "OCSP RESPONSE"
-
-#define d2i_OCSP_REQUEST_bio(bp,p) ASN1_d2i_bio_of(OCSP_REQUEST,OCSP_REQUEST_new,d2i_OCSP_REQUEST,bp,p)
-
-#define d2i_OCSP_RESPONSE_bio(bp,p) ASN1_d2i_bio_of(OCSP_RESPONSE,OCSP_RESPONSE_new,d2i_OCSP_RESPONSE,bp,p)
-
-#define	PEM_read_bio_OCSP_REQUEST(bp,x,cb) (OCSP_REQUEST *)PEM_ASN1_read_bio( \
-     (char *(*)())d2i_OCSP_REQUEST,PEM_STRING_OCSP_REQUEST,bp,(char **)x,cb,NULL)
-
-#define	PEM_read_bio_OCSP_RESPONSE(bp,x,cb)(OCSP_RESPONSE *)PEM_ASN1_read_bio(\
-     (char *(*)())d2i_OCSP_RESPONSE,PEM_STRING_OCSP_RESPONSE,bp,(char **)x,cb,NULL)
-
-#define PEM_write_bio_OCSP_REQUEST(bp,o) \
-    PEM_ASN1_write_bio((int (*)())i2d_OCSP_REQUEST,PEM_STRING_OCSP_REQUEST,\
-			bp,(char *)o, NULL,NULL,0,NULL,NULL)
-
-#define PEM_write_bio_OCSP_RESPONSE(bp,o) \
-    PEM_ASN1_write_bio((int (*)())i2d_OCSP_RESPONSE,PEM_STRING_OCSP_RESPONSE,\
-			bp,(char *)o, NULL,NULL,0,NULL,NULL)
-
-#define i2d_OCSP_RESPONSE_bio(bp,o) ASN1_i2d_bio_of(OCSP_RESPONSE,i2d_OCSP_RESPONSE,bp,o)
-
-#define i2d_OCSP_REQUEST_bio(bp,o) ASN1_i2d_bio_of(OCSP_REQUEST,i2d_OCSP_REQUEST,bp,o)
-
-#define OCSP_REQUEST_sign(o,pkey,md) \
-	ASN1_item_sign(ASN1_ITEM_rptr(OCSP_REQINFO),\
-		o->optionalSignature->signatureAlgorithm,NULL,\
-	        o->optionalSignature->signature,o->tbsRequest,pkey,md)
-
-#define OCSP_BASICRESP_sign(o,pkey,md,d) \
-	ASN1_item_sign(ASN1_ITEM_rptr(OCSP_RESPDATA),o->signatureAlgorithm,NULL,\
-		o->signature,o->tbsResponseData,pkey,md)
-
-#define OCSP_REQUEST_verify(a,r) ASN1_item_verify(ASN1_ITEM_rptr(OCSP_REQINFO),\
-        a->optionalSignature->signatureAlgorithm,\
-	a->optionalSignature->signature,a->tbsRequest,r)
-
-#define OCSP_BASICRESP_verify(a,r,d) ASN1_item_verify(ASN1_ITEM_rptr(OCSP_RESPDATA),\
-	a->signatureAlgorithm,a->signature,a->tbsResponseData,r)
-
-#define ASN1_BIT_STRING_digest(data,type,md,len) \
-	ASN1_item_digest(ASN1_ITEM_rptr(ASN1_BIT_STRING),type,data,md,len)
-
-#define OCSP_CERTID_dup(cid) ASN1_dup_of(OCSP_CERTID,i2d_OCSP_CERTID,d2i_OCSP_CERTID,cid)
-
-#define OCSP_CERTSTATUS_dup(cs)\
-                (OCSP_CERTSTATUS*)ASN1_dup((int(*)())i2d_OCSP_CERTSTATUS,\
-		(char *(*)())d2i_OCSP_CERTSTATUS,(char *)(cs))
-
-OCSP_RESPONSE *OCSP_sendreq_bio(BIO *b, char *path, OCSP_REQUEST *req);
-
-OCSP_CERTID *OCSP_cert_to_id(const EVP_MD *dgst, X509 *subject, X509 *issuer);
-
-OCSP_CERTID *OCSP_cert_id_new(const EVP_MD *dgst, 
-			      X509_NAME *issuerName, 
-			      ASN1_BIT_STRING* issuerKey, 
-			      ASN1_INTEGER *serialNumber);
-
-OCSP_ONEREQ *OCSP_request_add0_id(OCSP_REQUEST *req, OCSP_CERTID *cid);
-
-int OCSP_request_add1_nonce(OCSP_REQUEST *req, unsigned char *val, int len);
-int OCSP_basic_add1_nonce(OCSP_BASICRESP *resp, unsigned char *val, int len);
-int OCSP_check_nonce(OCSP_REQUEST *req, OCSP_BASICRESP *bs);
-int OCSP_copy_nonce(OCSP_BASICRESP *resp, OCSP_REQUEST *req);
-
-int OCSP_request_set1_name(OCSP_REQUEST *req, X509_NAME *nm);
-int OCSP_request_add1_cert(OCSP_REQUEST *req, X509 *cert);
-
-int OCSP_request_sign(OCSP_REQUEST   *req,
-		      X509           *signer,
-		      EVP_PKEY       *key,
-		      const EVP_MD   *dgst,
-		      STACK_OF(X509) *certs,
-		      unsigned long flags);
-
-int OCSP_response_status(OCSP_RESPONSE *resp);
-OCSP_BASICRESP *OCSP_response_get1_basic(OCSP_RESPONSE *resp);
-
-int OCSP_resp_count(OCSP_BASICRESP *bs);
-OCSP_SINGLERESP *OCSP_resp_get0(OCSP_BASICRESP *bs, int idx);
-int OCSP_resp_find(OCSP_BASICRESP *bs, OCSP_CERTID *id, int last);
-int OCSP_single_get0_status(OCSP_SINGLERESP *single, int *reason,
-				ASN1_GENERALIZEDTIME **revtime,
-				ASN1_GENERALIZEDTIME **thisupd,
-				ASN1_GENERALIZEDTIME **nextupd);
-int OCSP_resp_find_status(OCSP_BASICRESP *bs, OCSP_CERTID *id, int *status,
-				int *reason,
-				ASN1_GENERALIZEDTIME **revtime,
-				ASN1_GENERALIZEDTIME **thisupd,
-				ASN1_GENERALIZEDTIME **nextupd);
-int OCSP_check_validity(ASN1_GENERALIZEDTIME *thisupd,
-			ASN1_GENERALIZEDTIME *nextupd,
-			long sec, long maxsec);
-
-int OCSP_request_verify(OCSP_REQUEST *req, STACK_OF(X509) *certs, X509_STORE *store, unsigned long flags);
-
-int OCSP_parse_url(char *url, char **phost, char **pport, char **ppath, int *pssl);
-
-int OCSP_id_issuer_cmp(OCSP_CERTID *a, OCSP_CERTID *b);
-int OCSP_id_cmp(OCSP_CERTID *a, OCSP_CERTID *b);
-
-int OCSP_request_onereq_count(OCSP_REQUEST *req);
-OCSP_ONEREQ *OCSP_request_onereq_get0(OCSP_REQUEST *req, int i);
-OCSP_CERTID *OCSP_onereq_get0_id(OCSP_ONEREQ *one);
-int OCSP_id_get0_info(ASN1_OCTET_STRING **piNameHash, ASN1_OBJECT **pmd,
-			ASN1_OCTET_STRING **pikeyHash,
-			ASN1_INTEGER **pserial, OCSP_CERTID *cid);
-int OCSP_request_is_signed(OCSP_REQUEST *req);
-OCSP_RESPONSE *OCSP_response_create(int status, OCSP_BASICRESP *bs);
-OCSP_SINGLERESP *OCSP_basic_add1_status(OCSP_BASICRESP *rsp,
-						OCSP_CERTID *cid,
-						int status, int reason,
-						ASN1_TIME *revtime,
-					ASN1_TIME *thisupd, ASN1_TIME *nextupd);
-int OCSP_basic_add1_cert(OCSP_BASICRESP *resp, X509 *cert);
-int OCSP_basic_sign(OCSP_BASICRESP *brsp, 
-			X509 *signer, EVP_PKEY *key, const EVP_MD *dgst,
-			STACK_OF(X509) *certs, unsigned long flags);
-
-ASN1_STRING *ASN1_STRING_encode(ASN1_STRING *s, i2d_of_void *i2d,
-				void *data, STACK_OF(ASN1_OBJECT) *sk);
-#define ASN1_STRING_encode_of(type,s,i2d,data,sk) \
-((ASN1_STRING *(*)(ASN1_STRING *,I2D_OF(type),type *,STACK_OF(ASN1_OBJECT) *))openssl_fcast(ASN1_STRING_encode))(s,i2d,data,sk)
-
-X509_EXTENSION *OCSP_crlID_new(char *url, long *n, char *tim);
-
-X509_EXTENSION *OCSP_accept_responses_new(char **oids);
-
-X509_EXTENSION *OCSP_archive_cutoff_new(char* tim);
-
-X509_EXTENSION *OCSP_url_svcloc_new(X509_NAME* issuer, char **urls);
-
-int OCSP_REQUEST_get_ext_count(OCSP_REQUEST *x);
-int OCSP_REQUEST_get_ext_by_NID(OCSP_REQUEST *x, int nid, int lastpos);
-int OCSP_REQUEST_get_ext_by_OBJ(OCSP_REQUEST *x, ASN1_OBJECT *obj, int lastpos);
-int OCSP_REQUEST_get_ext_by_critical(OCSP_REQUEST *x, int crit, int lastpos);
-X509_EXTENSION *OCSP_REQUEST_get_ext(OCSP_REQUEST *x, int loc);
-X509_EXTENSION *OCSP_REQUEST_delete_ext(OCSP_REQUEST *x, int loc);
-void *OCSP_REQUEST_get1_ext_d2i(OCSP_REQUEST *x, int nid, int *crit, int *idx);
-int OCSP_REQUEST_add1_ext_i2d(OCSP_REQUEST *x, int nid, void *value, int crit,
-							unsigned long flags);
-int OCSP_REQUEST_add_ext(OCSP_REQUEST *x, X509_EXTENSION *ex, int loc);
-
-int OCSP_ONEREQ_get_ext_count(OCSP_ONEREQ *x);
-int OCSP_ONEREQ_get_ext_by_NID(OCSP_ONEREQ *x, int nid, int lastpos);
-int OCSP_ONEREQ_get_ext_by_OBJ(OCSP_ONEREQ *x, ASN1_OBJECT *obj, int lastpos);
-int OCSP_ONEREQ_get_ext_by_critical(OCSP_ONEREQ *x, int crit, int lastpos);
-X509_EXTENSION *OCSP_ONEREQ_get_ext(OCSP_ONEREQ *x, int loc);
-X509_EXTENSION *OCSP_ONEREQ_delete_ext(OCSP_ONEREQ *x, int loc);
-void *OCSP_ONEREQ_get1_ext_d2i(OCSP_ONEREQ *x, int nid, int *crit, int *idx);
-int OCSP_ONEREQ_add1_ext_i2d(OCSP_ONEREQ *x, int nid, void *value, int crit,
-							unsigned long flags);
-int OCSP_ONEREQ_add_ext(OCSP_ONEREQ *x, X509_EXTENSION *ex, int loc);
-
-int OCSP_BASICRESP_get_ext_count(OCSP_BASICRESP *x);
-int OCSP_BASICRESP_get_ext_by_NID(OCSP_BASICRESP *x, int nid, int lastpos);
-int OCSP_BASICRESP_get_ext_by_OBJ(OCSP_BASICRESP *x, ASN1_OBJECT *obj, int lastpos);
-int OCSP_BASICRESP_get_ext_by_critical(OCSP_BASICRESP *x, int crit, int lastpos);
-X509_EXTENSION *OCSP_BASICRESP_get_ext(OCSP_BASICRESP *x, int loc);
-X509_EXTENSION *OCSP_BASICRESP_delete_ext(OCSP_BASICRESP *x, int loc);
-void *OCSP_BASICRESP_get1_ext_d2i(OCSP_BASICRESP *x, int nid, int *crit, int *idx);
-int OCSP_BASICRESP_add1_ext_i2d(OCSP_BASICRESP *x, int nid, void *value, int crit,
-							unsigned long flags);
-int OCSP_BASICRESP_add_ext(OCSP_BASICRESP *x, X509_EXTENSION *ex, int loc);
-
-int OCSP_SINGLERESP_get_ext_count(OCSP_SINGLERESP *x);
-int OCSP_SINGLERESP_get_ext_by_NID(OCSP_SINGLERESP *x, int nid, int lastpos);
-int OCSP_SINGLERESP_get_ext_by_OBJ(OCSP_SINGLERESP *x, ASN1_OBJECT *obj, int lastpos);
-int OCSP_SINGLERESP_get_ext_by_critical(OCSP_SINGLERESP *x, int crit, int lastpos);
-X509_EXTENSION *OCSP_SINGLERESP_get_ext(OCSP_SINGLERESP *x, int loc);
-X509_EXTENSION *OCSP_SINGLERESP_delete_ext(OCSP_SINGLERESP *x, int loc);
-void *OCSP_SINGLERESP_get1_ext_d2i(OCSP_SINGLERESP *x, int nid, int *crit, int *idx);
-int OCSP_SINGLERESP_add1_ext_i2d(OCSP_SINGLERESP *x, int nid, void *value, int crit,
-							unsigned long flags);
-int OCSP_SINGLERESP_add_ext(OCSP_SINGLERESP *x, X509_EXTENSION *ex, int loc);
-
-DECLARE_ASN1_FUNCTIONS(OCSP_SINGLERESP)
-DECLARE_ASN1_FUNCTIONS(OCSP_CERTSTATUS)
-DECLARE_ASN1_FUNCTIONS(OCSP_REVOKEDINFO)
-DECLARE_ASN1_FUNCTIONS(OCSP_BASICRESP)
-DECLARE_ASN1_FUNCTIONS(OCSP_RESPDATA)
-DECLARE_ASN1_FUNCTIONS(OCSP_RESPID)
-DECLARE_ASN1_FUNCTIONS(OCSP_RESPONSE)
-DECLARE_ASN1_FUNCTIONS(OCSP_RESPBYTES)
-DECLARE_ASN1_FUNCTIONS(OCSP_ONEREQ)
-DECLARE_ASN1_FUNCTIONS(OCSP_CERTID)
-DECLARE_ASN1_FUNCTIONS(OCSP_REQUEST)
-DECLARE_ASN1_FUNCTIONS(OCSP_SIGNATURE)
-DECLARE_ASN1_FUNCTIONS(OCSP_REQINFO)
-DECLARE_ASN1_FUNCTIONS(OCSP_CRLID)
-DECLARE_ASN1_FUNCTIONS(OCSP_SERVICELOC)
-
-char *OCSP_response_status_str(long s);
-char *OCSP_cert_status_str(long s);
-char *OCSP_crl_reason_str(long s);
-
-int OCSP_REQUEST_print(BIO *bp, OCSP_REQUEST* a, unsigned long flags);
-int OCSP_RESPONSE_print(BIO *bp, OCSP_RESPONSE* o, unsigned long flags);
-
-int OCSP_basic_verify(OCSP_BASICRESP *bs, STACK_OF(X509) *certs,
-				X509_STORE *st, unsigned long flags);
-
-/* BEGIN ERROR CODES */
-/* The following lines are auto generated by the script mkerr.pl. Any changes
- * made after this point may be overwritten when the script is next run.
- */
-void ERR_load_OCSP_strings(void);
-
-/* Error codes for the OCSP functions. */
-
-/* Function codes. */
-#define OCSP_F_ASN1_STRING_ENCODE			 100
-#define OCSP_F_D2I_OCSP_NONCE				 102
-#define OCSP_F_OCSP_BASIC_ADD1_STATUS			 103
-#define OCSP_F_OCSP_BASIC_SIGN				 104
-#define OCSP_F_OCSP_BASIC_VERIFY			 105
-#define OCSP_F_OCSP_CERT_ID_NEW				 101
-#define OCSP_F_OCSP_CHECK_DELEGATED			 106
-#define OCSP_F_OCSP_CHECK_IDS				 107
-#define OCSP_F_OCSP_CHECK_ISSUER			 108
-#define OCSP_F_OCSP_CHECK_VALIDITY			 115
-#define OCSP_F_OCSP_MATCH_ISSUERID			 109
-#define OCSP_F_OCSP_PARSE_URL				 114
-#define OCSP_F_OCSP_REQUEST_SIGN			 110
-#define OCSP_F_OCSP_REQUEST_VERIFY			 116
-#define OCSP_F_OCSP_RESPONSE_GET1_BASIC			 111
-#define OCSP_F_OCSP_SENDREQ_BIO				 112
-#define OCSP_F_REQUEST_VERIFY				 113
-
-/* Reason codes. */
-#define OCSP_R_BAD_DATA					 100
-#define OCSP_R_CERTIFICATE_VERIFY_ERROR			 101
-#define OCSP_R_DIGEST_ERR				 102
-#define OCSP_R_ERROR_IN_NEXTUPDATE_FIELD		 122
-#define OCSP_R_ERROR_IN_THISUPDATE_FIELD		 123
-#define OCSP_R_ERROR_PARSING_URL			 121
-#define OCSP_R_MISSING_OCSPSIGNING_USAGE		 103
-#define OCSP_R_NEXTUPDATE_BEFORE_THISUPDATE		 124
-#define OCSP_R_NOT_BASIC_RESPONSE			 104
-#define OCSP_R_NO_CERTIFICATES_IN_CHAIN			 105
-#define OCSP_R_NO_CONTENT				 106
-#define OCSP_R_NO_PUBLIC_KEY				 107
-#define OCSP_R_NO_RESPONSE_DATA				 108
-#define OCSP_R_NO_REVOKED_TIME				 109
-#define OCSP_R_PRIVATE_KEY_DOES_NOT_MATCH_CERTIFICATE	 110
-#define OCSP_R_REQUEST_NOT_SIGNED			 128
-#define OCSP_R_RESPONSE_CONTAINS_NO_REVOCATION_DATA	 111
-#define OCSP_R_ROOT_CA_NOT_TRUSTED			 112
-#define OCSP_R_SERVER_READ_ERROR			 113
-#define OCSP_R_SERVER_RESPONSE_ERROR			 114
-#define OCSP_R_SERVER_RESPONSE_PARSE_ERROR		 115
-#define OCSP_R_SERVER_WRITE_ERROR			 116
-#define OCSP_R_SIGNATURE_FAILURE			 117
-#define OCSP_R_SIGNER_CERTIFICATE_NOT_FOUND		 118
-#define OCSP_R_STATUS_EXPIRED				 125
-#define OCSP_R_STATUS_NOT_YET_VALID			 126
-#define OCSP_R_STATUS_TOO_OLD				 127
-#define OCSP_R_UNKNOWN_MESSAGE_DIGEST			 119
-#define OCSP_R_UNKNOWN_NID				 120
-#define OCSP_R_UNSUPPORTED_REQUESTORNAME_TYPE		 129
-
-#ifdef  __cplusplus
-}
-#endif
-#endif
diff --git a/crypto/openssl/crypto/ocsp/ocsp_asn.c b/crypto/openssl/crypto/ocsp/ocsp_asn.c
deleted file mode 100644
index 39b7a1c56871..000000000000
--- a/crypto/openssl/crypto/ocsp/ocsp_asn.c
+++ /dev/null
@@ -1,182 +0,0 @@
-/* ocsp_asn.c */
-/* Written by Dr Stephen N Henson (shenson@bigfoot.com) for the OpenSSL
- * project 2000.
- */
-/* ====================================================================
- * Copyright (c) 2000 The OpenSSL Project.  All rights reserved.
- *
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions
- * are met:
- *
- * 1. Redistributions of source code must retain the above copyright
- *    notice, this list of conditions and the following disclaimer. 
- *
- * 2. Redistributions in binary form must reproduce the above copyright
- *    notice, this list of conditions and the following disclaimer in
- *    the documentation and/or other materials provided with the
- *    distribution.
- *
- * 3. All advertising materials mentioning features or use of this
- *    software must display the following acknowledgment:
- *    "This product includes software developed by the OpenSSL Project
- *    for use in the OpenSSL Toolkit. (http://www.OpenSSL.org/)"
- *
- * 4. The names "OpenSSL Toolkit" and "OpenSSL Project" must not be used to
- *    endorse or promote products derived from this software without
- *    prior written permission. For written permission, please contact
- *    licensing@OpenSSL.org.
- *
- * 5. Products derived from this software may not be called "OpenSSL"
- *    nor may "OpenSSL" appear in their names without prior written
- *    permission of the OpenSSL Project.
- *
- * 6. Redistributions of any form whatsoever must retain the following
- *    acknowledgment:
- *    "This product includes software developed by the OpenSSL Project
- *    for use in the OpenSSL Toolkit (http://www.OpenSSL.org/)"
- *
- * THIS SOFTWARE IS PROVIDED BY THE OpenSSL PROJECT ``AS IS'' AND ANY
- * EXPRESSED OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
- * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR
- * PURPOSE ARE DISCLAIMED.  IN NO EVENT SHALL THE OpenSSL PROJECT OR
- * ITS CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
- * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
- * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
- * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
- * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
- * STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
- * ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED
- * OF THE POSSIBILITY OF SUCH DAMAGE.
- * ====================================================================
- *
- * This product includes cryptographic software written by Eric Young
- * (eay@cryptsoft.com).  This product includes software written by Tim
- * Hudson (tjh@cryptsoft.com).
- *
- */
-#include <openssl/asn1.h>
-#include <openssl/asn1t.h>
-#include <openssl/ocsp.h>
-
-ASN1_SEQUENCE(OCSP_SIGNATURE) = {
-	ASN1_SIMPLE(OCSP_SIGNATURE, signatureAlgorithm, X509_ALGOR),
-	ASN1_SIMPLE(OCSP_SIGNATURE, signature, ASN1_BIT_STRING),
-	ASN1_EXP_SEQUENCE_OF_OPT(OCSP_SIGNATURE, certs, X509, 0)
-} ASN1_SEQUENCE_END(OCSP_SIGNATURE)
-
-IMPLEMENT_ASN1_FUNCTIONS(OCSP_SIGNATURE)
-
-ASN1_SEQUENCE(OCSP_CERTID) = {
-	ASN1_SIMPLE(OCSP_CERTID, hashAlgorithm, X509_ALGOR),
-	ASN1_SIMPLE(OCSP_CERTID, issuerNameHash, ASN1_OCTET_STRING),
-	ASN1_SIMPLE(OCSP_CERTID, issuerKeyHash, ASN1_OCTET_STRING),
-	ASN1_SIMPLE(OCSP_CERTID, serialNumber, ASN1_INTEGER)
-} ASN1_SEQUENCE_END(OCSP_CERTID)
-
-IMPLEMENT_ASN1_FUNCTIONS(OCSP_CERTID)
-
-ASN1_SEQUENCE(OCSP_ONEREQ) = {
-	ASN1_SIMPLE(OCSP_ONEREQ, reqCert, OCSP_CERTID),
-	ASN1_EXP_SEQUENCE_OF_OPT(OCSP_ONEREQ, singleRequestExtensions, X509_EXTENSION, 0)
-} ASN1_SEQUENCE_END(OCSP_ONEREQ)
-
-IMPLEMENT_ASN1_FUNCTIONS(OCSP_ONEREQ)
-
-ASN1_SEQUENCE(OCSP_REQINFO) = {
-	ASN1_EXP_OPT(OCSP_REQINFO, version, ASN1_INTEGER, 0),
-	ASN1_EXP_OPT(OCSP_REQINFO, requestorName, GENERAL_NAME, 1),
-	ASN1_SEQUENCE_OF(OCSP_REQINFO, requestList, OCSP_ONEREQ),
-	ASN1_EXP_SEQUENCE_OF_OPT(OCSP_REQINFO, requestExtensions, X509_EXTENSION, 2)
-} ASN1_SEQUENCE_END(OCSP_REQINFO)
-
-IMPLEMENT_ASN1_FUNCTIONS(OCSP_REQINFO)
-
-ASN1_SEQUENCE(OCSP_REQUEST) = {
-	ASN1_SIMPLE(OCSP_REQUEST, tbsRequest, OCSP_REQINFO),
-	ASN1_EXP_OPT(OCSP_REQUEST, optionalSignature, OCSP_SIGNATURE, 0)
-} ASN1_SEQUENCE_END(OCSP_REQUEST)
-
-IMPLEMENT_ASN1_FUNCTIONS(OCSP_REQUEST)
-
-/* OCSP_RESPONSE templates */
-
-ASN1_SEQUENCE(OCSP_RESPBYTES) = {
-	    ASN1_SIMPLE(OCSP_RESPBYTES, responseType, ASN1_OBJECT),
-	    ASN1_SIMPLE(OCSP_RESPBYTES, response, ASN1_OCTET_STRING)
-} ASN1_SEQUENCE_END(OCSP_RESPBYTES)
-
-IMPLEMENT_ASN1_FUNCTIONS(OCSP_RESPBYTES)
-
-ASN1_SEQUENCE(OCSP_RESPONSE) = {
-	ASN1_SIMPLE(OCSP_RESPONSE, responseStatus, ASN1_ENUMERATED),
-	ASN1_EXP_OPT(OCSP_RESPONSE, responseBytes, OCSP_RESPBYTES, 0)
-} ASN1_SEQUENCE_END(OCSP_RESPONSE)
-
-IMPLEMENT_ASN1_FUNCTIONS(OCSP_RESPONSE)
-
-ASN1_CHOICE(OCSP_RESPID) = {
-	   ASN1_EXP(OCSP_RESPID, value.byName, X509_NAME, 1),
-	   ASN1_EXP(OCSP_RESPID, value.byKey, ASN1_OCTET_STRING, 2)
-} ASN1_CHOICE_END(OCSP_RESPID)
-
-IMPLEMENT_ASN1_FUNCTIONS(OCSP_RESPID)
-
-ASN1_SEQUENCE(OCSP_REVOKEDINFO) = {
-	ASN1_SIMPLE(OCSP_REVOKEDINFO, revocationTime, ASN1_GENERALIZEDTIME),
-  	ASN1_EXP_OPT(OCSP_REVOKEDINFO, revocationReason, ASN1_ENUMERATED, 0)
-} ASN1_SEQUENCE_END(OCSP_REVOKEDINFO)
-
-IMPLEMENT_ASN1_FUNCTIONS(OCSP_REVOKEDINFO)
-
-ASN1_CHOICE(OCSP_CERTSTATUS) = {
-	ASN1_IMP(OCSP_CERTSTATUS, value.good, ASN1_NULL, 0),
-	ASN1_IMP(OCSP_CERTSTATUS, value.revoked, OCSP_REVOKEDINFO, 1),
-	ASN1_IMP(OCSP_CERTSTATUS, value.unknown, ASN1_NULL, 2)
-} ASN1_CHOICE_END(OCSP_CERTSTATUS)
-
-IMPLEMENT_ASN1_FUNCTIONS(OCSP_CERTSTATUS)
-
-ASN1_SEQUENCE(OCSP_SINGLERESP) = {
-	   ASN1_SIMPLE(OCSP_SINGLERESP, certId, OCSP_CERTID),
-	   ASN1_SIMPLE(OCSP_SINGLERESP, certStatus, OCSP_CERTSTATUS),
-	   ASN1_SIMPLE(OCSP_SINGLERESP, thisUpdate, ASN1_GENERALIZEDTIME),
-	   ASN1_EXP_OPT(OCSP_SINGLERESP, nextUpdate, ASN1_GENERALIZEDTIME, 0),
-	   ASN1_EXP_SEQUENCE_OF_OPT(OCSP_SINGLERESP, singleExtensions, X509_EXTENSION, 1)
-} ASN1_SEQUENCE_END(OCSP_SINGLERESP)
-
-IMPLEMENT_ASN1_FUNCTIONS(OCSP_SINGLERESP)
-
-ASN1_SEQUENCE(OCSP_RESPDATA) = {
-	   ASN1_EXP_OPT(OCSP_RESPDATA, version, ASN1_INTEGER, 0),
-	   ASN1_SIMPLE(OCSP_RESPDATA, responderId, OCSP_RESPID),
-	   ASN1_SIMPLE(OCSP_RESPDATA, producedAt, ASN1_GENERALIZEDTIME),
-	   ASN1_SEQUENCE_OF(OCSP_RESPDATA, responses, OCSP_SINGLERESP),
-	   ASN1_EXP_SEQUENCE_OF_OPT(OCSP_RESPDATA, responseExtensions, X509_EXTENSION, 1)
-} ASN1_SEQUENCE_END(OCSP_RESPDATA)
-
-IMPLEMENT_ASN1_FUNCTIONS(OCSP_RESPDATA)
-
-ASN1_SEQUENCE(OCSP_BASICRESP) = {
-	   ASN1_SIMPLE(OCSP_BASICRESP, tbsResponseData, OCSP_RESPDATA),
-	   ASN1_SIMPLE(OCSP_BASICRESP, signatureAlgorithm, X509_ALGOR),
-	   ASN1_SIMPLE(OCSP_BASICRESP, signature, ASN1_BIT_STRING),
-	   ASN1_EXP_SEQUENCE_OF_OPT(OCSP_BASICRESP, certs, X509, 0)
-} ASN1_SEQUENCE_END(OCSP_BASICRESP)
-
-IMPLEMENT_ASN1_FUNCTIONS(OCSP_BASICRESP)
-
-ASN1_SEQUENCE(OCSP_CRLID) = {
-	   ASN1_EXP_OPT(OCSP_CRLID, crlUrl, ASN1_IA5STRING, 0),
-	   ASN1_EXP_OPT(OCSP_CRLID, crlNum, ASN1_INTEGER, 1),
-	   ASN1_EXP_OPT(OCSP_CRLID, crlTime, ASN1_GENERALIZEDTIME, 2)
-} ASN1_SEQUENCE_END(OCSP_CRLID)
-
-IMPLEMENT_ASN1_FUNCTIONS(OCSP_CRLID)
-
-ASN1_SEQUENCE(OCSP_SERVICELOC) = {
-	ASN1_SIMPLE(OCSP_SERVICELOC, issuer, X509_NAME),
-	ASN1_SEQUENCE_OF_OPT(OCSP_SERVICELOC, locator, ACCESS_DESCRIPTION)
-} ASN1_SEQUENCE_END(OCSP_SERVICELOC)
-
-IMPLEMENT_ASN1_FUNCTIONS(OCSP_SERVICELOC)
diff --git a/crypto/openssl/crypto/ocsp/ocsp_cl.c b/crypto/openssl/crypto/ocsp/ocsp_cl.c
deleted file mode 100755
index 17bab5fc59c7..000000000000
--- a/crypto/openssl/crypto/ocsp/ocsp_cl.c
+++ /dev/null
@@ -1,372 +0,0 @@
-/* ocsp_cl.c */
-/* Written by Tom Titchener <Tom_Titchener@groove.net> for the OpenSSL
- * project. */
-
-/* History:
-   This file was transfered to Richard Levitte from CertCo by Kathy
-   Weinhold in mid-spring 2000 to be included in OpenSSL or released
-   as a patch kit. */
-
-/* ====================================================================
- * Copyright (c) 1998-2000 The OpenSSL Project.  All rights reserved.
- *
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions
- * are met:
- *
- * 1. Redistributions of source code must retain the above copyright
- *    notice, this list of conditions and the following disclaimer. 
- *
- * 2. Redistributions in binary form must reproduce the above copyright
- *    notice, this list of conditions and the following disclaimer in
- *    the documentation and/or other materials provided with the
- *    distribution.
- *
- * 3. All advertising materials mentioning features or use of this
- *    software must display the following acknowledgment:
- *    "This product includes software developed by the OpenSSL Project
- *    for use in the OpenSSL Toolkit. (http://www.openssl.org/)"
- *
- * 4. The names "OpenSSL Toolkit" and "OpenSSL Project" must not be used to
- *    endorse or promote products derived from this software without
- *    prior written permission. For written permission, please contact
- *    openssl-core@openssl.org.
- *
- * 5. Products derived from this software may not be called "OpenSSL"
- *    nor may "OpenSSL" appear in their names without prior written
- *    permission of the OpenSSL Project.
- *
- * 6. Redistributions of any form whatsoever must retain the following
- *    acknowledgment:
- *    "This product includes software developed by the OpenSSL Project
- *    for use in the OpenSSL Toolkit (http://www.openssl.org/)"
- *
- * THIS SOFTWARE IS PROVIDED BY THE OpenSSL PROJECT ``AS IS'' AND ANY
- * EXPRESSED OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
- * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR
- * PURPOSE ARE DISCLAIMED.  IN NO EVENT SHALL THE OpenSSL PROJECT OR
- * ITS CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
- * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
- * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
- * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
- * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
- * STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
- * ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED
- * OF THE POSSIBILITY OF SUCH DAMAGE.
- * ====================================================================
- *
- * This product includes cryptographic software written by Eric Young
- * (eay@cryptsoft.com).  This product includes software written by Tim
- * Hudson (tjh@cryptsoft.com).
- *
- */
-
-#include <stdio.h>
-#include <time.h>
-#include <cryptlib.h>
-#include <openssl/objects.h>
-#include <openssl/rand.h>
-#include <openssl/x509.h>
-#include <openssl/pem.h>
-#include <openssl/x509v3.h>
-#include <openssl/ocsp.h>
-
-/* Utility functions related to sending OCSP requests and extracting
- * relevant information from the response.
- */
-
-/* Add an OCSP_CERTID to an OCSP request. Return new OCSP_ONEREQ 
- * pointer: useful if we want to add extensions.
- */
-
-OCSP_ONEREQ *OCSP_request_add0_id(OCSP_REQUEST *req, OCSP_CERTID *cid)
-        {
-	OCSP_ONEREQ *one = NULL;
-
-	if (!(one = OCSP_ONEREQ_new())) goto err;
-	if (one->reqCert) OCSP_CERTID_free(one->reqCert);
-	one->reqCert = cid;
-	if (req &&
-		!sk_OCSP_ONEREQ_push(req->tbsRequest->requestList, one))
-				goto err;
-	return one;
-err:
-	OCSP_ONEREQ_free(one);
-	return NULL;
-        }
-
-/* Set requestorName from an X509_NAME structure */
-
-int OCSP_request_set1_name(OCSP_REQUEST *req, X509_NAME *nm)
-	{
-	GENERAL_NAME *gen;
-	gen = GENERAL_NAME_new();
-	if (gen == NULL)
-		return 0;
-	if (!X509_NAME_set(&gen->d.directoryName, nm))
-		{
-		GENERAL_NAME_free(gen);
-		return 0;
-		}
-	gen->type = GEN_DIRNAME;
-	if (req->tbsRequest->requestorName)
-		GENERAL_NAME_free(req->tbsRequest->requestorName);
-	req->tbsRequest->requestorName = gen;
-	return 1;
-	}
-	
-
-/* Add a certificate to an OCSP request */
-
-int OCSP_request_add1_cert(OCSP_REQUEST *req, X509 *cert)
-	{
-	OCSP_SIGNATURE *sig;
-	if (!req->optionalSignature)
-		req->optionalSignature = OCSP_SIGNATURE_new();
-	sig = req->optionalSignature;
-	if (!sig) return 0;
-	if (!cert) return 1;
-	if (!sig->certs && !(sig->certs = sk_X509_new_null()))
-		return 0;
-
-	if(!sk_X509_push(sig->certs, cert)) return 0;
-	CRYPTO_add(&cert->references, 1, CRYPTO_LOCK_X509);
-	return 1;
-	}
-
-/* Sign an OCSP request set the requestorName to the subjec
- * name of an optional signers certificate and include one
- * or more optional certificates in the request. Behaves
- * like PKCS7_sign().
- */
-
-int OCSP_request_sign(OCSP_REQUEST   *req,
-		      X509           *signer,
-		      EVP_PKEY       *key,
-		      const EVP_MD   *dgst,
-		      STACK_OF(X509) *certs,
-		      unsigned long flags)
-        {
-	int i;
-	OCSP_SIGNATURE *sig;
-	X509 *x;
-
-	if (!OCSP_request_set1_name(req, X509_get_subject_name(signer)))
-			goto err;
-
-	if (!(req->optionalSignature = sig = OCSP_SIGNATURE_new())) goto err;
-	if (!dgst) dgst = EVP_sha1();
-	if (key)
-		{
-		if (!X509_check_private_key(signer, key))
-			{
-			OCSPerr(OCSP_F_OCSP_REQUEST_SIGN, OCSP_R_PRIVATE_KEY_DOES_NOT_MATCH_CERTIFICATE);
-			goto err;
-			}
-		if (!OCSP_REQUEST_sign(req, key, dgst)) goto err;
-		}
-
-	if (!(flags & OCSP_NOCERTS))
-		{
-		if(!OCSP_request_add1_cert(req, signer)) goto err;
-		for (i = 0; i < sk_X509_num(certs); i++)
-			{
-			x = sk_X509_value(certs, i);
-			if (!OCSP_request_add1_cert(req, x)) goto err;
-			}
-		}
-
-	return 1;
-err:
-	OCSP_SIGNATURE_free(req->optionalSignature);
-	req->optionalSignature = NULL;
-	return 0;
-	}
-
-/* Get response status */
-
-int OCSP_response_status(OCSP_RESPONSE *resp)
-	{
-	return ASN1_ENUMERATED_get(resp->responseStatus);
-	}
-
-/* Extract basic response from OCSP_RESPONSE or NULL if
- * no basic response present.
- */
- 
-
-OCSP_BASICRESP *OCSP_response_get1_basic(OCSP_RESPONSE *resp)
-	{
-	OCSP_RESPBYTES *rb;
-	rb = resp->responseBytes;
-	if (!rb)
-		{
-		OCSPerr(OCSP_F_OCSP_RESPONSE_GET1_BASIC, OCSP_R_NO_RESPONSE_DATA);
-		return NULL;
-		}
-	if (OBJ_obj2nid(rb->responseType) != NID_id_pkix_OCSP_basic)
-		{
-		OCSPerr(OCSP_F_OCSP_RESPONSE_GET1_BASIC, OCSP_R_NOT_BASIC_RESPONSE);
-		return NULL;
-		}
-
-	return ASN1_item_unpack(rb->response, ASN1_ITEM_rptr(OCSP_BASICRESP));
-	}
-
-/* Return number of OCSP_SINGLERESP reponses present in
- * a basic response.
- */
-
-int OCSP_resp_count(OCSP_BASICRESP *bs)
-	{
-	if (!bs) return -1;
-	return sk_OCSP_SINGLERESP_num(bs->tbsResponseData->responses);
-	}
-
-/* Extract an OCSP_SINGLERESP response with a given index */
-
-OCSP_SINGLERESP *OCSP_resp_get0(OCSP_BASICRESP *bs, int idx)
-	{
-	if (!bs) return NULL;
-	return sk_OCSP_SINGLERESP_value(bs->tbsResponseData->responses, idx);
-	}
-
-/* Look single response matching a given certificate ID */
-
-int OCSP_resp_find(OCSP_BASICRESP *bs, OCSP_CERTID *id, int last)
-	{
-	int i;
-	STACK_OF(OCSP_SINGLERESP) *sresp;
-	OCSP_SINGLERESP *single;
-	if (!bs) return -1;
-	if (last < 0) last = 0;
-	else last++;
-	sresp = bs->tbsResponseData->responses;
-	for (i = last; i < sk_OCSP_SINGLERESP_num(sresp); i++)
-		{
-		single = sk_OCSP_SINGLERESP_value(sresp, i);
-		if (!OCSP_id_cmp(id, single->certId)) return i;
-		}
-	return -1;
-	}
-
-/* Extract status information from an OCSP_SINGLERESP structure.
- * Note: the revtime and reason values are only set if the 
- * certificate status is revoked. Returns numerical value of
- * status.
- */
-
-int OCSP_single_get0_status(OCSP_SINGLERESP *single, int *reason,
-				ASN1_GENERALIZEDTIME **revtime,
-				ASN1_GENERALIZEDTIME **thisupd,
-				ASN1_GENERALIZEDTIME **nextupd)
-	{
-	int ret;
-	OCSP_CERTSTATUS *cst;
-	if(!single) return -1;
-	cst = single->certStatus;
-	ret = cst->type;
-	if (ret == V_OCSP_CERTSTATUS_REVOKED)
-		{
-		OCSP_REVOKEDINFO *rev = cst->value.revoked;
-		if (revtime) *revtime = rev->revocationTime;
-		if (reason) 
-			{
-			if(rev->revocationReason)
-				*reason = ASN1_ENUMERATED_get(rev->revocationReason);
-			else *reason = -1;
-			}
-		}
-	if(thisupd) *thisupd = single->thisUpdate;
-	if(nextupd) *nextupd = single->nextUpdate;
-	return ret;
-	}
-
-/* This function combines the previous ones: look up a certificate ID and
- * if found extract status information. Return 0 is successful.
- */
-
-int OCSP_resp_find_status(OCSP_BASICRESP *bs, OCSP_CERTID *id, int *status,
-				int *reason,
-				ASN1_GENERALIZEDTIME **revtime,
-				ASN1_GENERALIZEDTIME **thisupd,
-				ASN1_GENERALIZEDTIME **nextupd)
-	{
-	int i;
-	OCSP_SINGLERESP *single;
-	i = OCSP_resp_find(bs, id, -1);
-	/* Maybe check for multiple responses and give an error? */
-	if(i < 0) return 0;
-	single = OCSP_resp_get0(bs, i);
-	i = OCSP_single_get0_status(single, reason, revtime, thisupd, nextupd);
-	if(status) *status = i;
-	return 1;
-	}
-
-/* Check validity of thisUpdate and nextUpdate fields. It is possible that the request will
- * take a few seconds to process and/or the time wont be totally accurate. Therefore to avoid
- * rejecting otherwise valid time we allow the times to be within 'nsec' of the current time.
- * Also to avoid accepting very old responses without a nextUpdate field an optional maxage
- * parameter specifies the maximum age the thisUpdate field can be.
- */
-
-int OCSP_check_validity(ASN1_GENERALIZEDTIME *thisupd, ASN1_GENERALIZEDTIME *nextupd, long nsec, long maxsec)
-	{
-	int ret = 1;
-	time_t t_now, t_tmp;
-	time(&t_now);
-	/* Check thisUpdate is valid and not more than nsec in the future */
-	if (!ASN1_GENERALIZEDTIME_check(thisupd))
-		{
-		OCSPerr(OCSP_F_OCSP_CHECK_VALIDITY, OCSP_R_ERROR_IN_THISUPDATE_FIELD);
-		ret = 0;
-		}
-	else 
-		{
-			t_tmp = t_now + nsec;
-			if (X509_cmp_time(thisupd, &t_tmp) > 0)
-			{
-			OCSPerr(OCSP_F_OCSP_CHECK_VALIDITY, OCSP_R_STATUS_NOT_YET_VALID);
-			ret = 0;
-			}
-
-		/* If maxsec specified check thisUpdate is not more than maxsec in the past */
-		if (maxsec >= 0)
-			{
-			t_tmp = t_now - maxsec;
-			if (X509_cmp_time(thisupd, &t_tmp) < 0)
-				{
-				OCSPerr(OCSP_F_OCSP_CHECK_VALIDITY, OCSP_R_STATUS_TOO_OLD);
-				ret = 0;
-				}
-			}
-		}
-		
-
-	if (!nextupd) return ret;
-
-	/* Check nextUpdate is valid and not more than nsec in the past */
-	if (!ASN1_GENERALIZEDTIME_check(nextupd))
-		{
-		OCSPerr(OCSP_F_OCSP_CHECK_VALIDITY, OCSP_R_ERROR_IN_NEXTUPDATE_FIELD);
-		ret = 0;
-		}
-	else 
-		{
-		t_tmp = t_now - nsec;
-		if (X509_cmp_time(nextupd, &t_tmp) < 0)
-			{
-			OCSPerr(OCSP_F_OCSP_CHECK_VALIDITY, OCSP_R_STATUS_EXPIRED);
-			ret = 0;
-			}
-		}
-
-	/* Also don't allow nextUpdate to precede thisUpdate */
-	if (ASN1_STRING_cmp(nextupd, thisupd) < 0)
-		{
-		OCSPerr(OCSP_F_OCSP_CHECK_VALIDITY, OCSP_R_NEXTUPDATE_BEFORE_THISUPDATE);
-		ret = 0;
-		}
-
-	return ret;
-	}
diff --git a/crypto/openssl/crypto/ocsp/ocsp_err.c b/crypto/openssl/crypto/ocsp/ocsp_err.c
deleted file mode 100644
index ad62364f298e..000000000000
--- a/crypto/openssl/crypto/ocsp/ocsp_err.c
+++ /dev/null
@@ -1,140 +0,0 @@
-/* crypto/ocsp/ocsp_err.c */
-/* ====================================================================
- * Copyright (c) 1999-2005 The OpenSSL Project.  All rights reserved.
- *
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions
- * are met:
- *
- * 1. Redistributions of source code must retain the above copyright
- *    notice, this list of conditions and the following disclaimer. 
- *
- * 2. Redistributions in binary form must reproduce the above copyright
- *    notice, this list of conditions and the following disclaimer in
- *    the documentation and/or other materials provided with the
- *    distribution.
- *
- * 3. All advertising materials mentioning features or use of this
- *    software must display the following acknowledgment:
- *    "This product includes software developed by the OpenSSL Project
- *    for use in the OpenSSL Toolkit. (http://www.OpenSSL.org/)"
- *
- * 4. The names "OpenSSL Toolkit" and "OpenSSL Project" must not be used to
- *    endorse or promote products derived from this software without
- *    prior written permission. For written permission, please contact
- *    openssl-core@OpenSSL.org.
- *
- * 5. Products derived from this software may not be called "OpenSSL"
- *    nor may "OpenSSL" appear in their names without prior written
- *    permission of the OpenSSL Project.
- *
- * 6. Redistributions of any form whatsoever must retain the following
- *    acknowledgment:
- *    "This product includes software developed by the OpenSSL Project
- *    for use in the OpenSSL Toolkit (http://www.OpenSSL.org/)"
- *
- * THIS SOFTWARE IS PROVIDED BY THE OpenSSL PROJECT ``AS IS'' AND ANY
- * EXPRESSED OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
- * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR
- * PURPOSE ARE DISCLAIMED.  IN NO EVENT SHALL THE OpenSSL PROJECT OR
- * ITS CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
- * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
- * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
- * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
- * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
- * STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
- * ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED
- * OF THE POSSIBILITY OF SUCH DAMAGE.
- * ====================================================================
- *
- * This product includes cryptographic software written by Eric Young
- * (eay@cryptsoft.com).  This product includes software written by Tim
- * Hudson (tjh@cryptsoft.com).
- *
- */
-
-/* NOTE: this file was auto generated by the mkerr.pl script: any changes
- * made to it will be overwritten when the script next updates this file,
- * only reason strings will be preserved.
- */
-
-#include <stdio.h>
-#include <openssl/err.h>
-#include <openssl/ocsp.h>
-
-/* BEGIN ERROR CODES */
-#ifndef OPENSSL_NO_ERR
-
-#define ERR_FUNC(func) ERR_PACK(ERR_LIB_OCSP,func,0)
-#define ERR_REASON(reason) ERR_PACK(ERR_LIB_OCSP,0,reason)
-
-static ERR_STRING_DATA OCSP_str_functs[]=
-	{
-{ERR_FUNC(OCSP_F_ASN1_STRING_ENCODE),	"ASN1_STRING_encode"},
-{ERR_FUNC(OCSP_F_D2I_OCSP_NONCE),	"D2I_OCSP_NONCE"},
-{ERR_FUNC(OCSP_F_OCSP_BASIC_ADD1_STATUS),	"OCSP_basic_add1_status"},
-{ERR_FUNC(OCSP_F_OCSP_BASIC_SIGN),	"OCSP_basic_sign"},
-{ERR_FUNC(OCSP_F_OCSP_BASIC_VERIFY),	"OCSP_basic_verify"},
-{ERR_FUNC(OCSP_F_OCSP_CERT_ID_NEW),	"OCSP_cert_id_new"},
-{ERR_FUNC(OCSP_F_OCSP_CHECK_DELEGATED),	"OCSP_CHECK_DELEGATED"},
-{ERR_FUNC(OCSP_F_OCSP_CHECK_IDS),	"OCSP_CHECK_IDS"},
-{ERR_FUNC(OCSP_F_OCSP_CHECK_ISSUER),	"OCSP_CHECK_ISSUER"},
-{ERR_FUNC(OCSP_F_OCSP_CHECK_VALIDITY),	"OCSP_check_validity"},
-{ERR_FUNC(OCSP_F_OCSP_MATCH_ISSUERID),	"OCSP_MATCH_ISSUERID"},
-{ERR_FUNC(OCSP_F_OCSP_PARSE_URL),	"OCSP_parse_url"},
-{ERR_FUNC(OCSP_F_OCSP_REQUEST_SIGN),	"OCSP_request_sign"},
-{ERR_FUNC(OCSP_F_OCSP_REQUEST_VERIFY),	"OCSP_request_verify"},
-{ERR_FUNC(OCSP_F_OCSP_RESPONSE_GET1_BASIC),	"OCSP_response_get1_basic"},
-{ERR_FUNC(OCSP_F_OCSP_SENDREQ_BIO),	"OCSP_sendreq_bio"},
-{ERR_FUNC(OCSP_F_REQUEST_VERIFY),	"REQUEST_VERIFY"},
-{0,NULL}
-	};
-
-static ERR_STRING_DATA OCSP_str_reasons[]=
-	{
-{ERR_REASON(OCSP_R_BAD_DATA)             ,"bad data"},
-{ERR_REASON(OCSP_R_CERTIFICATE_VERIFY_ERROR),"certificate verify error"},
-{ERR_REASON(OCSP_R_DIGEST_ERR)           ,"digest err"},
-{ERR_REASON(OCSP_R_ERROR_IN_NEXTUPDATE_FIELD),"error in nextupdate field"},
-{ERR_REASON(OCSP_R_ERROR_IN_THISUPDATE_FIELD),"error in thisupdate field"},
-{ERR_REASON(OCSP_R_ERROR_PARSING_URL)    ,"error parsing url"},
-{ERR_REASON(OCSP_R_MISSING_OCSPSIGNING_USAGE),"missing ocspsigning usage"},
-{ERR_REASON(OCSP_R_NEXTUPDATE_BEFORE_THISUPDATE),"nextupdate before thisupdate"},
-{ERR_REASON(OCSP_R_NOT_BASIC_RESPONSE)   ,"not basic response"},
-{ERR_REASON(OCSP_R_NO_CERTIFICATES_IN_CHAIN),"no certificates in chain"},
-{ERR_REASON(OCSP_R_NO_CONTENT)           ,"no content"},
-{ERR_REASON(OCSP_R_NO_PUBLIC_KEY)        ,"no public key"},
-{ERR_REASON(OCSP_R_NO_RESPONSE_DATA)     ,"no response data"},
-{ERR_REASON(OCSP_R_NO_REVOKED_TIME)      ,"no revoked time"},
-{ERR_REASON(OCSP_R_PRIVATE_KEY_DOES_NOT_MATCH_CERTIFICATE),"private key does not match certificate"},
-{ERR_REASON(OCSP_R_REQUEST_NOT_SIGNED)   ,"request not signed"},
-{ERR_REASON(OCSP_R_RESPONSE_CONTAINS_NO_REVOCATION_DATA),"response contains no revocation data"},
-{ERR_REASON(OCSP_R_ROOT_CA_NOT_TRUSTED)  ,"root ca not trusted"},
-{ERR_REASON(OCSP_R_SERVER_READ_ERROR)    ,"server read error"},
-{ERR_REASON(OCSP_R_SERVER_RESPONSE_ERROR),"server response error"},
-{ERR_REASON(OCSP_R_SERVER_RESPONSE_PARSE_ERROR),"server response parse error"},
-{ERR_REASON(OCSP_R_SERVER_WRITE_ERROR)   ,"server write error"},
-{ERR_REASON(OCSP_R_SIGNATURE_FAILURE)    ,"signature failure"},
-{ERR_REASON(OCSP_R_SIGNER_CERTIFICATE_NOT_FOUND),"signer certificate not found"},
-{ERR_REASON(OCSP_R_STATUS_EXPIRED)       ,"status expired"},
-{ERR_REASON(OCSP_R_STATUS_NOT_YET_VALID) ,"status not yet valid"},
-{ERR_REASON(OCSP_R_STATUS_TOO_OLD)       ,"status too old"},
-{ERR_REASON(OCSP_R_UNKNOWN_MESSAGE_DIGEST),"unknown message digest"},
-{ERR_REASON(OCSP_R_UNKNOWN_NID)          ,"unknown nid"},
-{ERR_REASON(OCSP_R_UNSUPPORTED_REQUESTORNAME_TYPE),"unsupported requestorname type"},
-{0,NULL}
-	};
-
-#endif
-
-void ERR_load_OCSP_strings(void)
-	{
-#ifndef OPENSSL_NO_ERR
-
-	if (ERR_func_error_string(OCSP_str_functs[0].error) == NULL)
-		{
-		ERR_load_strings(0,OCSP_str_functs);
-		ERR_load_strings(0,OCSP_str_reasons);
-		}
-#endif
-	}
diff --git a/crypto/openssl/crypto/ocsp/ocsp_ext.c b/crypto/openssl/crypto/ocsp/ocsp_ext.c
deleted file mode 100755
index 815cc29d58fe..000000000000
--- a/crypto/openssl/crypto/ocsp/ocsp_ext.c
+++ /dev/null
@@ -1,545 +0,0 @@
-/* ocsp_ext.c */
-/* Written by Tom Titchener <Tom_Titchener@groove.net> for the OpenSSL
- * project. */
-
-/* History:
-   This file was transfered to Richard Levitte from CertCo by Kathy
-   Weinhold in mid-spring 2000 to be included in OpenSSL or released
-   as a patch kit. */
-
-/* ====================================================================
- * Copyright (c) 1998-2000 The OpenSSL Project.  All rights reserved.
- *
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions
- * are met:
- *
- * 1. Redistributions of source code must retain the above copyright
- *    notice, this list of conditions and the following disclaimer. 
- *
- * 2. Redistributions in binary form must reproduce the above copyright
- *    notice, this list of conditions and the following disclaimer in
- *    the documentation and/or other materials provided with the
- *    distribution.
- *
- * 3. All advertising materials mentioning features or use of this
- *    software must display the following acknowledgment:
- *    "This product includes software developed by the OpenSSL Project
- *    for use in the OpenSSL Toolkit. (http://www.openssl.org/)"
- *
- * 4. The names "OpenSSL Toolkit" and "OpenSSL Project" must not be used to
- *    endorse or promote products derived from this software without
- *    prior written permission. For written permission, please contact
- *    openssl-core@openssl.org.
- *
- * 5. Products derived from this software may not be called "OpenSSL"
- *    nor may "OpenSSL" appear in their names without prior written
- *    permission of the OpenSSL Project.
- *
- * 6. Redistributions of any form whatsoever must retain the following
- *    acknowledgment:
- *    "This product includes software developed by the OpenSSL Project
- *    for use in the OpenSSL Toolkit (http://www.openssl.org/)"
- *
- * THIS SOFTWARE IS PROVIDED BY THE OpenSSL PROJECT ``AS IS'' AND ANY
- * EXPRESSED OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
- * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR
- * PURPOSE ARE DISCLAIMED.  IN NO EVENT SHALL THE OpenSSL PROJECT OR
- * ITS CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
- * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
- * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
- * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
- * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
- * STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
- * ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED
- * OF THE POSSIBILITY OF SUCH DAMAGE.
- * ====================================================================
- *
- * This product includes cryptographic software written by Eric Young
- * (eay@cryptsoft.com).  This product includes software written by Tim
- * Hudson (tjh@cryptsoft.com).
- *
- */
-
-#include <stdio.h>
-#include <cryptlib.h>
-#include <openssl/objects.h>
-#include <openssl/x509.h>
-#include <openssl/ocsp.h>
-#include <openssl/rand.h>
-#include <openssl/x509v3.h>
-
-/* Standard wrapper functions for extensions */
-
-/* OCSP request extensions */
-
-int OCSP_REQUEST_get_ext_count(OCSP_REQUEST *x)
-	{
-	return(X509v3_get_ext_count(x->tbsRequest->requestExtensions));
-	}
-
-int OCSP_REQUEST_get_ext_by_NID(OCSP_REQUEST *x, int nid, int lastpos)
-	{
-	return(X509v3_get_ext_by_NID(x->tbsRequest->requestExtensions,nid,lastpos));
-	}
-
-int OCSP_REQUEST_get_ext_by_OBJ(OCSP_REQUEST *x, ASN1_OBJECT *obj, int lastpos)
-	{
-	return(X509v3_get_ext_by_OBJ(x->tbsRequest->requestExtensions,obj,lastpos));
-	}
-
-int OCSP_REQUEST_get_ext_by_critical(OCSP_REQUEST *x, int crit, int lastpos)
-	{
-	return(X509v3_get_ext_by_critical(x->tbsRequest->requestExtensions,crit,lastpos));
-	}
-
-X509_EXTENSION *OCSP_REQUEST_get_ext(OCSP_REQUEST *x, int loc)
-	{
-	return(X509v3_get_ext(x->tbsRequest->requestExtensions,loc));
-	}
-
-X509_EXTENSION *OCSP_REQUEST_delete_ext(OCSP_REQUEST *x, int loc)
-	{
-	return(X509v3_delete_ext(x->tbsRequest->requestExtensions,loc));
-	}
-
-void *OCSP_REQUEST_get1_ext_d2i(OCSP_REQUEST *x, int nid, int *crit, int *idx)
-	{
-	return X509V3_get_d2i(x->tbsRequest->requestExtensions, nid, crit, idx);
-	}
-
-int OCSP_REQUEST_add1_ext_i2d(OCSP_REQUEST *x, int nid, void *value, int crit,
-							unsigned long flags)
-	{
-	return X509V3_add1_i2d(&x->tbsRequest->requestExtensions, nid, value, crit, flags);
-	}
-
-int OCSP_REQUEST_add_ext(OCSP_REQUEST *x, X509_EXTENSION *ex, int loc)
-	{
-	return(X509v3_add_ext(&(x->tbsRequest->requestExtensions),ex,loc) != NULL);
-	}
-
-/* Single extensions */
-
-int OCSP_ONEREQ_get_ext_count(OCSP_ONEREQ *x)
-	{
-	return(X509v3_get_ext_count(x->singleRequestExtensions));
-	}
-
-int OCSP_ONEREQ_get_ext_by_NID(OCSP_ONEREQ *x, int nid, int lastpos)
-	{
-	return(X509v3_get_ext_by_NID(x->singleRequestExtensions,nid,lastpos));
-	}
-
-int OCSP_ONEREQ_get_ext_by_OBJ(OCSP_ONEREQ *x, ASN1_OBJECT *obj, int lastpos)
-	{
-	return(X509v3_get_ext_by_OBJ(x->singleRequestExtensions,obj,lastpos));
-	}
-
-int OCSP_ONEREQ_get_ext_by_critical(OCSP_ONEREQ *x, int crit, int lastpos)
-	{
-	return(X509v3_get_ext_by_critical(x->singleRequestExtensions,crit,lastpos));
-	}
-
-X509_EXTENSION *OCSP_ONEREQ_get_ext(OCSP_ONEREQ *x, int loc)
-	{
-	return(X509v3_get_ext(x->singleRequestExtensions,loc));
-	}
-
-X509_EXTENSION *OCSP_ONEREQ_delete_ext(OCSP_ONEREQ *x, int loc)
-	{
-	return(X509v3_delete_ext(x->singleRequestExtensions,loc));
-	}
-
-void *OCSP_ONEREQ_get1_ext_d2i(OCSP_ONEREQ *x, int nid, int *crit, int *idx)
-	{
-	return X509V3_get_d2i(x->singleRequestExtensions, nid, crit, idx);
-	}
-
-int OCSP_ONEREQ_add1_ext_i2d(OCSP_ONEREQ *x, int nid, void *value, int crit,
-							unsigned long flags)
-	{
-	return X509V3_add1_i2d(&x->singleRequestExtensions, nid, value, crit, flags);
-	}
-
-int OCSP_ONEREQ_add_ext(OCSP_ONEREQ *x, X509_EXTENSION *ex, int loc)
-	{
-	return(X509v3_add_ext(&(x->singleRequestExtensions),ex,loc) != NULL);
-	}
-
-/* OCSP Basic response */
-
-int OCSP_BASICRESP_get_ext_count(OCSP_BASICRESP *x)
-	{
-	return(X509v3_get_ext_count(x->tbsResponseData->responseExtensions));
-	}
-
-int OCSP_BASICRESP_get_ext_by_NID(OCSP_BASICRESP *x, int nid, int lastpos)
-	{
-	return(X509v3_get_ext_by_NID(x->tbsResponseData->responseExtensions,nid,lastpos));
-	}
-
-int OCSP_BASICRESP_get_ext_by_OBJ(OCSP_BASICRESP *x, ASN1_OBJECT *obj, int lastpos)
-	{
-	return(X509v3_get_ext_by_OBJ(x->tbsResponseData->responseExtensions,obj,lastpos));
-	}
-
-int OCSP_BASICRESP_get_ext_by_critical(OCSP_BASICRESP *x, int crit, int lastpos)
-	{
-	return(X509v3_get_ext_by_critical(x->tbsResponseData->responseExtensions,crit,lastpos));
-	}
-
-X509_EXTENSION *OCSP_BASICRESP_get_ext(OCSP_BASICRESP *x, int loc)
-	{
-	return(X509v3_get_ext(x->tbsResponseData->responseExtensions,loc));
-	}
-
-X509_EXTENSION *OCSP_BASICRESP_delete_ext(OCSP_BASICRESP *x, int loc)
-	{
-	return(X509v3_delete_ext(x->tbsResponseData->responseExtensions,loc));
-	}
-
-void *OCSP_BASICRESP_get1_ext_d2i(OCSP_BASICRESP *x, int nid, int *crit, int *idx)
-	{
-	return X509V3_get_d2i(x->tbsResponseData->responseExtensions, nid, crit, idx);
-	}
-
-int OCSP_BASICRESP_add1_ext_i2d(OCSP_BASICRESP *x, int nid, void *value, int crit,
-							unsigned long flags)
-	{
-	return X509V3_add1_i2d(&x->tbsResponseData->responseExtensions, nid, value, crit, flags);
-	}
-
-int OCSP_BASICRESP_add_ext(OCSP_BASICRESP *x, X509_EXTENSION *ex, int loc)
-	{
-	return(X509v3_add_ext(&(x->tbsResponseData->responseExtensions),ex,loc) != NULL);
-	}
-
-/* OCSP single response extensions */
-
-int OCSP_SINGLERESP_get_ext_count(OCSP_SINGLERESP *x)
-	{
-	return(X509v3_get_ext_count(x->singleExtensions));
-	}
-
-int OCSP_SINGLERESP_get_ext_by_NID(OCSP_SINGLERESP *x, int nid, int lastpos)
-	{
-	return(X509v3_get_ext_by_NID(x->singleExtensions,nid,lastpos));
-	}
-
-int OCSP_SINGLERESP_get_ext_by_OBJ(OCSP_SINGLERESP *x, ASN1_OBJECT *obj, int lastpos)
-	{
-	return(X509v3_get_ext_by_OBJ(x->singleExtensions,obj,lastpos));
-	}
-
-int OCSP_SINGLERESP_get_ext_by_critical(OCSP_SINGLERESP *x, int crit, int lastpos)
-	{
-	return(X509v3_get_ext_by_critical(x->singleExtensions,crit,lastpos));
-	}
-
-X509_EXTENSION *OCSP_SINGLERESP_get_ext(OCSP_SINGLERESP *x, int loc)
-	{
-	return(X509v3_get_ext(x->singleExtensions,loc));
-	}
-
-X509_EXTENSION *OCSP_SINGLERESP_delete_ext(OCSP_SINGLERESP *x, int loc)
-	{
-	return(X509v3_delete_ext(x->singleExtensions,loc));
-	}
-
-void *OCSP_SINGLERESP_get1_ext_d2i(OCSP_SINGLERESP *x, int nid, int *crit, int *idx)
-	{
-	return X509V3_get_d2i(x->singleExtensions, nid, crit, idx);
-	}
-
-int OCSP_SINGLERESP_add1_ext_i2d(OCSP_SINGLERESP *x, int nid, void *value, int crit,
-							unsigned long flags)
-	{
-	return X509V3_add1_i2d(&x->singleExtensions, nid, value, crit, flags);
-	}
-
-int OCSP_SINGLERESP_add_ext(OCSP_SINGLERESP *x, X509_EXTENSION *ex, int loc)
-	{
-	return(X509v3_add_ext(&(x->singleExtensions),ex,loc) != NULL);
-	}
-
-/* also CRL Entry Extensions */
-
-ASN1_STRING *ASN1_STRING_encode(ASN1_STRING *s, i2d_of_void *i2d,
-				void *data, STACK_OF(ASN1_OBJECT) *sk)
-        {
-	int i;
-	unsigned char *p, *b = NULL;
-
-	if (data)
-	        {
-		if ((i=i2d(data,NULL)) <= 0) goto err;
-		if (!(b=p=OPENSSL_malloc((unsigned int)i)))
-			goto err;
-	        if (i2d(data, &p) <= 0) goto err;
-		}
-	else if (sk)
-	        {
-		if ((i=i2d_ASN1_SET_OF_ASN1_OBJECT(sk,NULL,
-						   (I2D_OF(ASN1_OBJECT))i2d,
-						   V_ASN1_SEQUENCE,
-						   V_ASN1_UNIVERSAL,
-						   IS_SEQUENCE))<=0) goto err;
-		if (!(b=p=OPENSSL_malloc((unsigned int)i)))
-			goto err;
-		if (i2d_ASN1_SET_OF_ASN1_OBJECT(sk,&p,(I2D_OF(ASN1_OBJECT))i2d,
-						V_ASN1_SEQUENCE,
-						V_ASN1_UNIVERSAL,
-						IS_SEQUENCE)<=0) goto err;
-		}
-	else
-		{
-		OCSPerr(OCSP_F_ASN1_STRING_ENCODE,OCSP_R_BAD_DATA);
-		goto err;
-		}
-	if (!s && !(s = ASN1_STRING_new())) goto err;
-	if (!(ASN1_STRING_set(s, b, i))) goto err;
-	OPENSSL_free(b);
-	return s;
-err:
-	if (b) OPENSSL_free(b);
-	return NULL;
-	}
-
-/* Nonce handling functions */
-
-/* Add a nonce to an extension stack. A nonce can be specificed or if NULL
- * a random nonce will be generated.
- * Note: OpenSSL 0.9.7d and later create an OCTET STRING containing the 
- * nonce, previous versions used the raw nonce.
- */
-
-static int ocsp_add1_nonce(STACK_OF(X509_EXTENSION) **exts, unsigned char *val, int len)
-	{
-	unsigned char *tmpval;
-	ASN1_OCTET_STRING os;
-	int ret = 0;
-	if (len <= 0) len = OCSP_DEFAULT_NONCE_LENGTH;
-	/* Create the OCTET STRING manually by writing out the header and
-	 * appending the content octets. This avoids an extra memory allocation
-	 * operation in some cases. Applications should *NOT* do this because
-         * it relies on library internals.
-	 */
-	os.length = ASN1_object_size(0, len, V_ASN1_OCTET_STRING);
-	os.data = OPENSSL_malloc(os.length);
-	if (os.data == NULL)
-		goto err;
-	tmpval = os.data;
-	ASN1_put_object(&tmpval, 0, len, V_ASN1_OCTET_STRING, V_ASN1_UNIVERSAL);
-	if (val)
-		memcpy(tmpval, val, len);
-	else
-		RAND_pseudo_bytes(tmpval, len);
-	if(!X509V3_add1_i2d(exts, NID_id_pkix_OCSP_Nonce,
-			&os, 0, X509V3_ADD_REPLACE))
-				goto err;
-	ret = 1;
-	err:
-	if (os.data)
-		OPENSSL_free(os.data);
-	return ret;
-	}
-
-
-/* Add nonce to an OCSP request */
-
-int OCSP_request_add1_nonce(OCSP_REQUEST *req, unsigned char *val, int len)
-	{
-	return ocsp_add1_nonce(&req->tbsRequest->requestExtensions, val, len);
-	}
-
-/* Same as above but for a response */
-
-int OCSP_basic_add1_nonce(OCSP_BASICRESP *resp, unsigned char *val, int len)
-	{
-	return ocsp_add1_nonce(&resp->tbsResponseData->responseExtensions, val, len);
-	}
-
-/* Check nonce validity in a request and response.
- * Return value reflects result:
- *  1: nonces present and equal.
- *  2: nonces both absent.
- *  3: nonce present in response only.
- *  0: nonces both present and not equal.
- * -1: nonce in request only.
- *
- *  For most responders clients can check return > 0.
- *  If responder doesn't handle nonces return != 0 may be
- *  necessary. return == 0 is always an error.
- */
-
-int OCSP_check_nonce(OCSP_REQUEST *req, OCSP_BASICRESP *bs)
-	{
-	/*
-	 * Since we are only interested in the presence or absence of
-	 * the nonce and comparing its value there is no need to use
-	 * the X509V3 routines: this way we can avoid them allocating an
-	 * ASN1_OCTET_STRING structure for the value which would be
-	 * freed immediately anyway.
-	 */
-
-	int req_idx, resp_idx;
-	X509_EXTENSION *req_ext, *resp_ext;
-	req_idx = OCSP_REQUEST_get_ext_by_NID(req, NID_id_pkix_OCSP_Nonce, -1);
-	resp_idx = OCSP_BASICRESP_get_ext_by_NID(bs, NID_id_pkix_OCSP_Nonce, -1);
-	/* Check both absent */
-	if((req_idx < 0) && (resp_idx < 0))
-		return 2;
-	/* Check in request only */
-	if((req_idx >= 0) && (resp_idx < 0))
-		return -1;
-	/* Check in response but not request */
-	if((req_idx < 0) && (resp_idx >= 0))
-		return 3;
-	/* Otherwise nonce in request and response so retrieve the extensions */
-	req_ext = OCSP_REQUEST_get_ext(req, req_idx);
-	resp_ext = OCSP_BASICRESP_get_ext(bs, resp_idx);
-	if(ASN1_OCTET_STRING_cmp(req_ext->value, resp_ext->value))
-		return 0;
-	return 1;
-	}
-
-/* Copy the nonce value (if any) from an OCSP request to 
- * a response.
- */
-
-int OCSP_copy_nonce(OCSP_BASICRESP *resp, OCSP_REQUEST *req)
-	{
-	X509_EXTENSION *req_ext;
-	int req_idx;
-	/* Check for nonce in request */
-	req_idx = OCSP_REQUEST_get_ext_by_NID(req, NID_id_pkix_OCSP_Nonce, -1);
-	/* If no nonce that's OK */
-	if (req_idx < 0) return 2;
-	req_ext = OCSP_REQUEST_get_ext(req, req_idx);
-	return OCSP_BASICRESP_add_ext(resp, req_ext, -1);
-	}
-
-X509_EXTENSION *OCSP_crlID_new(char *url, long *n, char *tim)
-        {
-	X509_EXTENSION *x = NULL;
-	OCSP_CRLID *cid = NULL;
-	
-	if (!(cid = OCSP_CRLID_new())) goto err;
-	if (url)
-	        {
-		if (!(cid->crlUrl = ASN1_IA5STRING_new())) goto err;
-		if (!(ASN1_STRING_set(cid->crlUrl, url, -1))) goto err;
-		}
-	if (n)
-	        {
-		if (!(cid->crlNum = ASN1_INTEGER_new())) goto err;
-		if (!(ASN1_INTEGER_set(cid->crlNum, *n))) goto err;
-		}
-	if (tim)
-	        {
-		if (!(cid->crlTime = ASN1_GENERALIZEDTIME_new())) goto err;
-		if (!(ASN1_GENERALIZEDTIME_set_string(cid->crlTime, tim))) 
-		        goto err;
-		}
-	if (!(x = X509_EXTENSION_new())) goto err;
-	if (!(x->object = OBJ_nid2obj(NID_id_pkix_OCSP_CrlID))) goto err;
-	if (!(ASN1_STRING_encode_of(OCSP_CRLID,x->value,i2d_OCSP_CRLID,cid,
-				    NULL)))
-	        goto err;
-	OCSP_CRLID_free(cid);
-	return x;
-err:
-	if (x) X509_EXTENSION_free(x);
-	if (cid) OCSP_CRLID_free(cid);
-	return NULL;
-	}
-
-/*   AcceptableResponses ::= SEQUENCE OF OBJECT IDENTIFIER */
-X509_EXTENSION *OCSP_accept_responses_new(char **oids)
-        {
-	int nid;
-	STACK_OF(ASN1_OBJECT) *sk = NULL;
-	ASN1_OBJECT *o = NULL;
-        X509_EXTENSION *x = NULL;
-
-	if (!(sk = sk_ASN1_OBJECT_new_null())) goto err;
-	while (oids && *oids)
-	        {
-		if ((nid=OBJ_txt2nid(*oids))!=NID_undef&&(o=OBJ_nid2obj(nid))) 
-		        sk_ASN1_OBJECT_push(sk, o);
-		oids++;
-		}
-	if (!(x = X509_EXTENSION_new())) goto err;
-	if (!(x->object = OBJ_nid2obj(NID_id_pkix_OCSP_acceptableResponses)))
-		goto err;
-	if (!(ASN1_STRING_encode_of(ASN1_OBJECT,x->value,i2d_ASN1_OBJECT,NULL,
-				    sk)))
-	        goto err;
-	sk_ASN1_OBJECT_pop_free(sk, ASN1_OBJECT_free);
-	return x;
-err:
-	if (x) X509_EXTENSION_free(x);
-	if (sk) sk_ASN1_OBJECT_pop_free(sk, ASN1_OBJECT_free);
-	return NULL;
-        }
-
-/*  ArchiveCutoff ::= GeneralizedTime */
-X509_EXTENSION *OCSP_archive_cutoff_new(char* tim)
-        {
-	X509_EXTENSION *x=NULL;
-	ASN1_GENERALIZEDTIME *gt = NULL;
-
-	if (!(gt = ASN1_GENERALIZEDTIME_new())) goto err;
-	if (!(ASN1_GENERALIZEDTIME_set_string(gt, tim))) goto err;
-	if (!(x = X509_EXTENSION_new())) goto err;
-	if (!(x->object=OBJ_nid2obj(NID_id_pkix_OCSP_archiveCutoff)))goto err;
-	if (!(ASN1_STRING_encode_of(ASN1_GENERALIZEDTIME,x->value,
-				    i2d_ASN1_GENERALIZEDTIME,gt,NULL))) goto err;
-	ASN1_GENERALIZEDTIME_free(gt);
-	return x;
-err:
-	if (gt) ASN1_GENERALIZEDTIME_free(gt);
-	if (x) X509_EXTENSION_free(x);
-	return NULL;
-	}
-
-/* per ACCESS_DESCRIPTION parameter are oids, of which there are currently
- * two--NID_ad_ocsp, NID_id_ad_caIssuers--and GeneralName value.  This
- * method forces NID_ad_ocsp and uniformResourceLocator [6] IA5String.
- */
-X509_EXTENSION *OCSP_url_svcloc_new(X509_NAME* issuer, char **urls)
-        {
-	X509_EXTENSION *x = NULL;
-	ASN1_IA5STRING *ia5 = NULL;
-	OCSP_SERVICELOC *sloc = NULL;
-	ACCESS_DESCRIPTION *ad = NULL;
-	
-	if (!(sloc = OCSP_SERVICELOC_new())) goto err;
-	if (!(sloc->issuer = X509_NAME_dup(issuer))) goto err;
-	if (urls && *urls && !(sloc->locator = sk_ACCESS_DESCRIPTION_new_null())) goto err;
-	while (urls && *urls)
-	        {
-		if (!(ad = ACCESS_DESCRIPTION_new())) goto err;
-		if (!(ad->method=OBJ_nid2obj(NID_ad_OCSP))) goto err;
-		if (!(ad->location = GENERAL_NAME_new())) goto err;
-	        if (!(ia5 = ASN1_IA5STRING_new())) goto err;
-		if (!ASN1_STRING_set((ASN1_STRING*)ia5, *urls, -1)) goto err;
-		ad->location->type = GEN_URI;
-		ad->location->d.ia5 = ia5;
-		if (!sk_ACCESS_DESCRIPTION_push(sloc->locator, ad)) goto err;
-		urls++;
-		}
-	if (!(x = X509_EXTENSION_new())) goto err;
-	if (!(x->object = OBJ_nid2obj(NID_id_pkix_OCSP_serviceLocator))) 
-	        goto err;
-	if (!(ASN1_STRING_encode_of(OCSP_SERVICELOC,x->value,
-				    i2d_OCSP_SERVICELOC,sloc,NULL))) goto err;
-	OCSP_SERVICELOC_free(sloc);
-	return x;
-err:
-	if (x) X509_EXTENSION_free(x);
-	if (sloc) OCSP_SERVICELOC_free(sloc);
-	return NULL;
-	}
-
diff --git a/crypto/openssl/crypto/ocsp/ocsp_ht.c b/crypto/openssl/crypto/ocsp/ocsp_ht.c
deleted file mode 100644
index 9213e58ae49c..000000000000
--- a/crypto/openssl/crypto/ocsp/ocsp_ht.c
+++ /dev/null
@@ -1,173 +0,0 @@
-/* ocsp_ht.c */
-/* Written by Dr Stephen N Henson (shenson@bigfoot.com) for the OpenSSL
- * project 2000.
- */
-/* ====================================================================
- * Copyright (c) 2000 The OpenSSL Project.  All rights reserved.
- *
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions
- * are met:
- *
- * 1. Redistributions of source code must retain the above copyright
- *    notice, this list of conditions and the following disclaimer. 
- *
- * 2. Redistributions in binary form must reproduce the above copyright
- *    notice, this list of conditions and the following disclaimer in
- *    the documentation and/or other materials provided with the
- *    distribution.
- *
- * 3. All advertising materials mentioning features or use of this
- *    software must display the following acknowledgment:
- *    "This product includes software developed by the OpenSSL Project
- *    for use in the OpenSSL Toolkit. (http://www.OpenSSL.org/)"
- *
- * 4. The names "OpenSSL Toolkit" and "OpenSSL Project" must not be used to
- *    endorse or promote products derived from this software without
- *    prior written permission. For written permission, please contact
- *    licensing@OpenSSL.org.
- *
- * 5. Products derived from this software may not be called "OpenSSL"
- *    nor may "OpenSSL" appear in their names without prior written
- *    permission of the OpenSSL Project.
- *
- * 6. Redistributions of any form whatsoever must retain the following
- *    acknowledgment:
- *    "This product includes software developed by the OpenSSL Project
- *    for use in the OpenSSL Toolkit (http://www.OpenSSL.org/)"
- *
- * THIS SOFTWARE IS PROVIDED BY THE OpenSSL PROJECT ``AS IS'' AND ANY
- * EXPRESSED OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
- * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR
- * PURPOSE ARE DISCLAIMED.  IN NO EVENT SHALL THE OpenSSL PROJECT OR
- * ITS CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
- * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
- * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
- * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
- * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
- * STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
- * ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED
- * OF THE POSSIBILITY OF SUCH DAMAGE.
- * ====================================================================
- *
- * This product includes cryptographic software written by Eric Young
- * (eay@cryptsoft.com).  This product includes software written by Tim
- * Hudson (tjh@cryptsoft.com).
- *
- */
-
-#include <openssl/asn1.h>
-#include <stdio.h>
-#include <stdlib.h>
-#include <ctype.h>
-#include <string.h>
-#include <openssl/ocsp.h>
-#include <openssl/err.h>
-#include <openssl/buffer.h>
-#ifdef OPENSSL_SYS_SUNOS
-#define strtoul (unsigned long)strtol
-#endif /* OPENSSL_SYS_SUNOS */
-
-/* Quick and dirty HTTP OCSP request handler.
- * Could make this a bit cleverer by adding
- * support for non blocking BIOs and a few
- * other refinements.
- */
-
-OCSP_RESPONSE *OCSP_sendreq_bio(BIO *b, char *path, OCSP_REQUEST *req)
-{
-	BIO *mem = NULL;
-	char tmpbuf[1024];
-	OCSP_RESPONSE *resp = NULL;
-	char *p, *q, *r;
-	int len, retcode;
-	static char req_txt[] =
-"POST %s HTTP/1.0\r\n\
-Content-Type: application/ocsp-request\r\n\
-Content-Length: %d\r\n\r\n";
-
-	len = i2d_OCSP_REQUEST(req, NULL);
-	if(BIO_printf(b, req_txt, path, len) < 0) {
-		OCSPerr(OCSP_F_OCSP_SENDREQ_BIO,OCSP_R_SERVER_WRITE_ERROR);
-		goto err;
-	}
-	if(i2d_OCSP_REQUEST_bio(b, req) <= 0) {
-		OCSPerr(OCSP_F_OCSP_SENDREQ_BIO,OCSP_R_SERVER_WRITE_ERROR);
-		goto err;
-	}
-	if(!(mem = BIO_new(BIO_s_mem()))) goto err;
-	/* Copy response to a memory BIO: socket bios can't do gets! */
-	while ((len = BIO_read(b, tmpbuf, sizeof tmpbuf))) {
-		if(len < 0) {
-			OCSPerr(OCSP_F_OCSP_SENDREQ_BIO,OCSP_R_SERVER_READ_ERROR);
-			goto err;
-		}
-		BIO_write(mem, tmpbuf, len);
-	}
-	if(BIO_gets(mem, tmpbuf, 512) <= 0) {
-		OCSPerr(OCSP_F_OCSP_SENDREQ_BIO,OCSP_R_SERVER_RESPONSE_PARSE_ERROR);
-		goto err;
-	}
-	/* Parse the HTTP response. This will look like this:
-	 * "HTTP/1.0 200 OK". We need to obtain the numeric code and
-         * (optional) informational message.
-	 */
-
-	/* Skip to first white space (passed protocol info) */
-	for(p = tmpbuf; *p && !isspace((unsigned char)*p); p++) continue;
-	if(!*p) {
-		OCSPerr(OCSP_F_OCSP_SENDREQ_BIO,OCSP_R_SERVER_RESPONSE_PARSE_ERROR);
-		goto err;
-	}
-	/* Skip past white space to start of response code */
-	while(*p && isspace((unsigned char)*p)) p++;
-	if(!*p) {
-		OCSPerr(OCSP_F_OCSP_SENDREQ_BIO,OCSP_R_SERVER_RESPONSE_PARSE_ERROR);
-		goto err;
-	}
-	/* Find end of response code: first whitespace after start of code */
-	for(q = p; *q && !isspace((unsigned char)*q); q++) continue;
-	if(!*q) {
-		OCSPerr(OCSP_F_OCSP_SENDREQ_BIO,OCSP_R_SERVER_RESPONSE_PARSE_ERROR);
-		goto err;
-	}
-	/* Set end of response code and start of message */ 
-	*q++ = 0;
-	/* Attempt to parse numeric code */
-	retcode = strtoul(p, &r, 10);
-	if(*r) goto err;
-	/* Skip over any leading white space in message */
-	while(*q && isspace((unsigned char)*q))  q++;
-	if(*q) {
-	/* Finally zap any trailing white space in message (include CRLF) */
-	/* We know q has a non white space character so this is OK */
-		for(r = q + strlen(q) - 1; isspace((unsigned char)*r); r--) *r = 0;
-	}
-	if(retcode != 200) {
-		OCSPerr(OCSP_F_OCSP_SENDREQ_BIO,OCSP_R_SERVER_RESPONSE_ERROR);
-		if(!*q) { 
-			ERR_add_error_data(2, "Code=", p);
-		}
-		else {
-			ERR_add_error_data(4, "Code=", p, ",Reason=", q);
-		}
-		goto err;
-	}
-	/* Find blank line marking beginning of content */	
-	while(BIO_gets(mem, tmpbuf, 512) > 0)
-	{
-		for(p = tmpbuf; *p && isspace((unsigned char)*p); p++) continue;
-		if(!*p) break;
-	}
-	if(*p) {
-		OCSPerr(OCSP_F_OCSP_SENDREQ_BIO,OCSP_R_NO_CONTENT);
-		goto err;
-	}
-	if(!(resp = d2i_OCSP_RESPONSE_bio(mem, NULL))) {
-		OCSPerr(OCSP_F_OCSP_SENDREQ_BIO,ERR_R_NESTED_ASN1_ERROR);
-		goto err;
-	}
-	err:
-	BIO_free(mem);
-	return resp;
-}
diff --git a/crypto/openssl/crypto/ocsp/ocsp_lib.c b/crypto/openssl/crypto/ocsp/ocsp_lib.c
deleted file mode 100755
index 27450811d720..000000000000
--- a/crypto/openssl/crypto/ocsp/ocsp_lib.c
+++ /dev/null
@@ -1,262 +0,0 @@
-/* ocsp_lib.c */
-/* Written by Tom Titchener <Tom_Titchener@groove.net> for the OpenSSL
- * project. */
-
-/* History:
-   This file was transfered to Richard Levitte from CertCo by Kathy
-   Weinhold in mid-spring 2000 to be included in OpenSSL or released
-   as a patch kit. */
-
-/* ====================================================================
- * Copyright (c) 1998-2000 The OpenSSL Project.  All rights reserved.
- *
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions
- * are met:
- *
- * 1. Redistributions of source code must retain the above copyright
- *    notice, this list of conditions and the following disclaimer. 
- *
- * 2. Redistributions in binary form must reproduce the above copyright
- *    notice, this list of conditions and the following disclaimer in
- *    the documentation and/or other materials provided with the
- *    distribution.
- *
- * 3. All advertising materials mentioning features or use of this
- *    software must display the following acknowledgment:
- *    "This product includes software developed by the OpenSSL Project
- *    for use in the OpenSSL Toolkit. (http://www.openssl.org/)"
- *
- * 4. The names "OpenSSL Toolkit" and "OpenSSL Project" must not be used to
- *    endorse or promote products derived from this software without
- *    prior written permission. For written permission, please contact
- *    openssl-core@openssl.org.
- *
- * 5. Products derived from this software may not be called "OpenSSL"
- *    nor may "OpenSSL" appear in their names without prior written
- *    permission of the OpenSSL Project.
- *
- * 6. Redistributions of any form whatsoever must retain the following
- *    acknowledgment:
- *    "This product includes software developed by the OpenSSL Project
- *    for use in the OpenSSL Toolkit (http://www.openssl.org/)"
- *
- * THIS SOFTWARE IS PROVIDED BY THE OpenSSL PROJECT ``AS IS'' AND ANY
- * EXPRESSED OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
- * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR
- * PURPOSE ARE DISCLAIMED.  IN NO EVENT SHALL THE OpenSSL PROJECT OR
- * ITS CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
- * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
- * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
- * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
- * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
- * STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
- * ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED
- * OF THE POSSIBILITY OF SUCH DAMAGE.
- * ====================================================================
- *
- * This product includes cryptographic software written by Eric Young
- * (eay@cryptsoft.com).  This product includes software written by Tim
- * Hudson (tjh@cryptsoft.com).
- *
- */
-
-#include <stdio.h>
-#include <cryptlib.h>
-#include <openssl/objects.h>
-#include <openssl/rand.h>
-#include <openssl/x509.h>
-#include <openssl/pem.h>
-#include <openssl/x509v3.h>
-#include <openssl/ocsp.h>
-
-/* Convert a certificate and its issuer to an OCSP_CERTID */
-
-OCSP_CERTID *OCSP_cert_to_id(const EVP_MD *dgst, X509 *subject, X509 *issuer)
-{
-	X509_NAME *iname;
-	ASN1_INTEGER *serial;
-	ASN1_BIT_STRING *ikey;
-#ifndef OPENSSL_NO_SHA1
-	if(!dgst) dgst = EVP_sha1();
-#endif
-	if (subject)
-		{
-		iname = X509_get_issuer_name(subject);
-		serial = X509_get_serialNumber(subject);
-		}
-	else
-		{
-		iname = X509_get_subject_name(issuer);
-		serial = NULL;
-		}
-	ikey = X509_get0_pubkey_bitstr(issuer);
-	return OCSP_cert_id_new(dgst, iname, ikey, serial);
-}
-
-
-OCSP_CERTID *OCSP_cert_id_new(const EVP_MD *dgst, 
-			      X509_NAME *issuerName, 
-			      ASN1_BIT_STRING* issuerKey, 
-			      ASN1_INTEGER *serialNumber)
-        {
-	int nid;
-        unsigned int i;
-	X509_ALGOR *alg;
-	OCSP_CERTID *cid = NULL;
-	unsigned char md[EVP_MAX_MD_SIZE];
-
-	if (!(cid = OCSP_CERTID_new())) goto err;
-
-	alg = cid->hashAlgorithm;
-	if (alg->algorithm != NULL) ASN1_OBJECT_free(alg->algorithm);
-	if ((nid = EVP_MD_type(dgst)) == NID_undef)
-	        {
-		OCSPerr(OCSP_F_OCSP_CERT_ID_NEW,OCSP_R_UNKNOWN_NID);
-		goto err;
-		}
-	if (!(alg->algorithm=OBJ_nid2obj(nid))) goto err;
-	if ((alg->parameter=ASN1_TYPE_new()) == NULL) goto err;
-	alg->parameter->type=V_ASN1_NULL;
-
-	if (!X509_NAME_digest(issuerName, dgst, md, &i)) goto digerr;
-	if (!(ASN1_OCTET_STRING_set(cid->issuerNameHash, md, i))) goto err;
-
-	/* Calculate the issuerKey hash, excluding tag and length */
-	EVP_Digest(issuerKey->data, issuerKey->length, md, &i, dgst, NULL);
-
-	if (!(ASN1_OCTET_STRING_set(cid->issuerKeyHash, md, i))) goto err;
-
-	if (serialNumber)
-		{
-		ASN1_INTEGER_free(cid->serialNumber);
-		if (!(cid->serialNumber = ASN1_INTEGER_dup(serialNumber))) goto err;
-		}
-	return cid;
-digerr:
-	OCSPerr(OCSP_F_OCSP_CERT_ID_NEW,OCSP_R_DIGEST_ERR);
-err:
-	if (cid) OCSP_CERTID_free(cid);
-	return NULL;
-	}
-
-int OCSP_id_issuer_cmp(OCSP_CERTID *a, OCSP_CERTID *b)
-	{
-	int ret;
-	ret = OBJ_cmp(a->hashAlgorithm->algorithm, b->hashAlgorithm->algorithm);
-	if (ret) return ret;
-	ret = ASN1_OCTET_STRING_cmp(a->issuerNameHash, b->issuerNameHash);
-	if (ret) return ret;
-	return ASN1_OCTET_STRING_cmp(a->issuerKeyHash, b->issuerKeyHash);
-	}
-
-int OCSP_id_cmp(OCSP_CERTID *a, OCSP_CERTID *b)
-	{
-	int ret;
-	ret = OCSP_id_issuer_cmp(a, b);
-	if (ret) return ret;
-	return ASN1_INTEGER_cmp(a->serialNumber, b->serialNumber);
-	}
-
-
-/* Parse a URL and split it up into host, port and path components and whether
- * it is SSL.
- */
-
-int OCSP_parse_url(char *url, char **phost, char **pport, char **ppath, int *pssl)
-	{
-	char *p, *buf;
-
-	char *host, *port;
-
-	/* dup the buffer since we are going to mess with it */
-	buf = BUF_strdup(url);
-	if (!buf) goto mem_err;
-
-	*phost = NULL;
-	*pport = NULL;
-	*ppath = NULL;
-
-	/* Check for initial colon */
-	p = strchr(buf, ':');
-
-	if (!p) goto parse_err;
-
-	*(p++) = '\0';
-
-	if (!strcmp(buf, "http"))
-		{
-		*pssl = 0;
-		port = "80";
-		}
-	else if (!strcmp(buf, "https"))
-		{
-		*pssl = 1;
-		port = "443";
-		}
-	else
-		goto parse_err;
-
-	/* Check for double slash */
-	if ((p[0] != '/') || (p[1] != '/'))
-		goto parse_err;
-
-	p += 2;
-
-	host = p;
-
-	/* Check for trailing part of path */
-
-	p = strchr(p, '/');
-
-	if (!p) 
-		*ppath = BUF_strdup("/");
-	else
-		{
-		*ppath = BUF_strdup(p);
-		/* Set start of path to 0 so hostname is valid */
-		*p = '\0';
-		}
-
-	if (!*ppath) goto mem_err;
-
-	/* Look for optional ':' for port number */
-	if ((p = strchr(host, ':')))
-		{
-		*p = 0;
-		port = p + 1;
-		}
-	else
-		{
-		/* Not found: set default port */
-		if (*pssl) port = "443";
-		else port = "80";
-		}
-
-	*pport = BUF_strdup(port);
-	if (!*pport) goto mem_err;
-
-	*phost = BUF_strdup(host);
-
-	if (!*phost) goto mem_err;
-
-	OPENSSL_free(buf);
-
-	return 1;
-
-	mem_err:
-	OCSPerr(OCSP_F_OCSP_PARSE_URL, ERR_R_MALLOC_FAILURE);
-	goto err;
-
-	parse_err:
-	OCSPerr(OCSP_F_OCSP_PARSE_URL, OCSP_R_ERROR_PARSING_URL);
-
-
-	err:
-	if (buf) OPENSSL_free(buf);
-	if (*ppath) OPENSSL_free(*ppath);
-	if (*pport) OPENSSL_free(*pport);
-	if (*phost) OPENSSL_free(*phost);
-	return 0;
-
-	}
diff --git a/crypto/openssl/crypto/ocsp/ocsp_prn.c b/crypto/openssl/crypto/ocsp/ocsp_prn.c
deleted file mode 100644
index 3dfb51c1e41c..000000000000
--- a/crypto/openssl/crypto/ocsp/ocsp_prn.c
+++ /dev/null
@@ -1,291 +0,0 @@
-/* ocsp_prn.c */
-/* Written by Tom Titchener <Tom_Titchener@groove.net> for the OpenSSL
- * project. */
-
-/* History:
-   This file was originally part of ocsp.c and was transfered to Richard
-   Levitte from CertCo by Kathy Weinhold in mid-spring 2000 to be included
-   in OpenSSL or released as a patch kit. */
-
-/* ====================================================================
- * Copyright (c) 1998-2000 The OpenSSL Project.  All rights reserved.
- *
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions
- * are met:
- *
- * 1. Redistributions of source code must retain the above copyright
- *    notice, this list of conditions and the following disclaimer. 
- *
- * 2. Redistributions in binary form must reproduce the above copyright
- *    notice, this list of conditions and the following disclaimer in
- *    the documentation and/or other materials provided with the
- *    distribution.
- *
- * 3. All advertising materials mentioning features or use of this
- *    software must display the following acknowledgment:
- *    "This product includes software developed by the OpenSSL Project
- *    for use in the OpenSSL Toolkit. (http://www.openssl.org/)"
- *
- * 4. The names "OpenSSL Toolkit" and "OpenSSL Project" must not be used to
- *    endorse or promote products derived from this software without
- *    prior written permission. For written permission, please contact
- *    openssl-core@openssl.org.
- *
- * 5. Products derived from this software may not be called "OpenSSL"
- *    nor may "OpenSSL" appear in their names without prior written
- *    permission of the OpenSSL Project.
- *
- * 6. Redistributions of any form whatsoever must retain the following
- *    acknowledgment:
- *    "This product includes software developed by the OpenSSL Project
- *    for use in the OpenSSL Toolkit (http://www.openssl.org/)"
- *
- * THIS SOFTWARE IS PROVIDED BY THE OpenSSL PROJECT ``AS IS'' AND ANY
- * EXPRESSED OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
- * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR
- * PURPOSE ARE DISCLAIMED.  IN NO EVENT SHALL THE OpenSSL PROJECT OR
- * ITS CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
- * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
- * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
- * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
- * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
- * STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
- * ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED
- * OF THE POSSIBILITY OF SUCH DAMAGE.
- * ====================================================================
- *
- * This product includes cryptographic software written by Eric Young
- * (eay@cryptsoft.com).  This product includes software written by Tim
- * Hudson (tjh@cryptsoft.com).
- *
- */
-
-#include <openssl/bio.h>
-#include <openssl/err.h>
-#include <openssl/ocsp.h>
-#include <openssl/pem.h>
-
-static int ocsp_certid_print(BIO *bp, OCSP_CERTID* a, int indent)
-        {
-	BIO_printf(bp, "%*sCertificate ID:\n", indent, "");
-	indent += 2;
-	BIO_printf(bp, "%*sHash Algorithm: ", indent, "");
-	i2a_ASN1_OBJECT(bp, a->hashAlgorithm->algorithm);
-	BIO_printf(bp, "\n%*sIssuer Name Hash: ", indent, "");
-	i2a_ASN1_STRING(bp, a->issuerNameHash, V_ASN1_OCTET_STRING);
-	BIO_printf(bp, "\n%*sIssuer Key Hash: ", indent, "");
-	i2a_ASN1_STRING(bp, a->issuerKeyHash, V_ASN1_OCTET_STRING);
-	BIO_printf(bp, "\n%*sSerial Number: ", indent, "");
-	i2a_ASN1_INTEGER(bp, a->serialNumber);
-	BIO_printf(bp, "\n");
-	return 1;
-	}
-
-typedef struct
-	{
-	long t;
-	char *m;
-	} OCSP_TBLSTR;
-
-static char *table2string(long s, OCSP_TBLSTR *ts, int len)
-{
-	OCSP_TBLSTR *p;
-	for (p=ts; p < ts + len; p++)
-	        if (p->t == s)
-		         return p->m;
-	return "(UNKNOWN)";
-}
-
-char *OCSP_response_status_str(long s)
-        {
-	static OCSP_TBLSTR rstat_tbl[] = {
-	        { OCSP_RESPONSE_STATUS_SUCCESSFUL, "successful" },
-	        { OCSP_RESPONSE_STATUS_MALFORMEDREQUEST, "malformedrequest" },
-	        { OCSP_RESPONSE_STATUS_INTERNALERROR, "internalerror" },
-	        { OCSP_RESPONSE_STATUS_TRYLATER, "trylater" },
-	        { OCSP_RESPONSE_STATUS_SIGREQUIRED, "sigrequired" },
-	        { OCSP_RESPONSE_STATUS_UNAUTHORIZED, "unauthorized" } };
-	return table2string(s, rstat_tbl, 6);
-	} 
-
-char *OCSP_cert_status_str(long s)
-        {
-	static OCSP_TBLSTR cstat_tbl[] = {
-	        { V_OCSP_CERTSTATUS_GOOD, "good" },
-	        { V_OCSP_CERTSTATUS_REVOKED, "revoked" },
-	        { V_OCSP_CERTSTATUS_UNKNOWN, "unknown" } };
-	return table2string(s, cstat_tbl, 3);
-	} 
-
-char *OCSP_crl_reason_str(long s)
-        {
-	OCSP_TBLSTR reason_tbl[] = {
-	  { OCSP_REVOKED_STATUS_UNSPECIFIED, "unspecified" },
-          { OCSP_REVOKED_STATUS_KEYCOMPROMISE, "keyCompromise" },
-          { OCSP_REVOKED_STATUS_CACOMPROMISE, "cACompromise" },
-          { OCSP_REVOKED_STATUS_AFFILIATIONCHANGED, "affiliationChanged" },
-          { OCSP_REVOKED_STATUS_SUPERSEDED, "superseded" },
-          { OCSP_REVOKED_STATUS_CESSATIONOFOPERATION, "cessationOfOperation" },
-          { OCSP_REVOKED_STATUS_CERTIFICATEHOLD, "certificateHold" },
-          { OCSP_REVOKED_STATUS_REMOVEFROMCRL, "removeFromCRL" } };
-	return table2string(s, reason_tbl, 8);
-	} 
-
-int OCSP_REQUEST_print(BIO *bp, OCSP_REQUEST* o, unsigned long flags)
-        {
-	int i;
-	long l;
-	OCSP_CERTID* cid = NULL;
-	OCSP_ONEREQ *one = NULL;
-	OCSP_REQINFO *inf = o->tbsRequest;
-	OCSP_SIGNATURE *sig = o->optionalSignature;
-
-	if (BIO_write(bp,"OCSP Request Data:\n",19) <= 0) goto err;
-	l=ASN1_INTEGER_get(inf->version);
-	if (BIO_printf(bp,"    Version: %lu (0x%lx)",l+1,l) <= 0) goto err;
-	if (inf->requestorName != NULL)
-	        {
-		if (BIO_write(bp,"\n    Requestor Name: ",21) <= 0) 
-		        goto err;
-		GENERAL_NAME_print(bp, inf->requestorName);
-		}
-	if (BIO_write(bp,"\n    Requestor List:\n",21) <= 0) goto err;
-	for (i = 0; i < sk_OCSP_ONEREQ_num(inf->requestList); i++)
-	        {
-		one = sk_OCSP_ONEREQ_value(inf->requestList, i);
-		cid = one->reqCert;
-		ocsp_certid_print(bp, cid, 8);
-		if (!X509V3_extensions_print(bp,
-					"Request Single Extensions",
-					one->singleRequestExtensions, flags, 8))
-							goto err;
-		}
-	if (!X509V3_extensions_print(bp, "Request Extensions",
-			inf->requestExtensions, flags, 4))
-							goto err;
-	if (sig)
-	        {
-		X509_signature_print(bp, sig->signatureAlgorithm, sig->signature);
-		for (i=0; i<sk_X509_num(sig->certs); i++)
-			{
-			X509_print(bp, sk_X509_value(sig->certs,i));
-			PEM_write_bio_X509(bp,sk_X509_value(sig->certs,i));
-			}
-		}
-	return 1;
-err:
-	return 0;
-	}
-
-int OCSP_RESPONSE_print(BIO *bp, OCSP_RESPONSE* o, unsigned long flags)
-        {
-	int i, ret = 0;
-	long l;
-	unsigned char *p;
-	OCSP_CERTID *cid = NULL;
-	OCSP_BASICRESP *br = NULL;
-	OCSP_RESPID *rid = NULL;
-	OCSP_RESPDATA  *rd = NULL;
-	OCSP_CERTSTATUS *cst = NULL;
-	OCSP_REVOKEDINFO *rev = NULL;
-	OCSP_SINGLERESP *single = NULL;
-	OCSP_RESPBYTES *rb = o->responseBytes;
-
-	if (BIO_puts(bp,"OCSP Response Data:\n") <= 0) goto err;
-	l=ASN1_ENUMERATED_get(o->responseStatus);
-	if (BIO_printf(bp,"    OCSP Response Status: %s (0x%lx)\n",
-		       OCSP_response_status_str(l), l) <= 0) goto err;
-	if (rb == NULL) return 1;
-        if (BIO_puts(bp,"    Response Type: ") <= 0)
-	        goto err;
-	if(i2a_ASN1_OBJECT(bp, rb->responseType) <= 0)
-	        goto err;
-	if (OBJ_obj2nid(rb->responseType) != NID_id_pkix_OCSP_basic) 
-	        {
-		BIO_puts(bp," (unknown response type)\n");
-		return 1;
-		}
-
-	p = ASN1_STRING_data(rb->response);
-	i = ASN1_STRING_length(rb->response);
-	if (!(br = OCSP_response_get1_basic(o))) goto err;
-	rd = br->tbsResponseData;
-	l=ASN1_INTEGER_get(rd->version);
-	if (BIO_printf(bp,"\n    Version: %lu (0x%lx)\n",
-		       l+1,l) <= 0) goto err;
-	if (BIO_puts(bp,"    Responder Id: ") <= 0) goto err;
-
-	rid =  rd->responderId;
-	switch (rid->type)
-		{
-		case V_OCSP_RESPID_NAME:
-		        X509_NAME_print_ex(bp, rid->value.byName, 0, XN_FLAG_ONELINE);
-		        break;
-		case V_OCSP_RESPID_KEY:
-		        i2a_ASN1_STRING(bp, rid->value.byKey, V_ASN1_OCTET_STRING);
-		        break;
-		}
-
-	if (BIO_printf(bp,"\n    Produced At: ")<=0) goto err;
-	if (!ASN1_GENERALIZEDTIME_print(bp, rd->producedAt)) goto err;
-	if (BIO_printf(bp,"\n    Responses:\n") <= 0) goto err;
-	for (i = 0; i < sk_OCSP_SINGLERESP_num(rd->responses); i++)
-	        {
-		if (! sk_OCSP_SINGLERESP_value(rd->responses, i)) continue;
-		single = sk_OCSP_SINGLERESP_value(rd->responses, i);
-		cid = single->certId;
-		if(ocsp_certid_print(bp, cid, 4) <= 0) goto err;
-		cst = single->certStatus;
-		if (BIO_printf(bp,"    Cert Status: %s",
-			       OCSP_cert_status_str(cst->type)) <= 0)
-		        goto err;
-		if (cst->type == V_OCSP_CERTSTATUS_REVOKED)
-		        {
-		        rev = cst->value.revoked;
-			if (BIO_printf(bp, "\n    Revocation Time: ") <= 0) 
-			        goto err;
-			if (!ASN1_GENERALIZEDTIME_print(bp, 
-							rev->revocationTime)) 
-				goto err;
-			if (rev->revocationReason) 
-			        {
-				l=ASN1_ENUMERATED_get(rev->revocationReason);
-				if (BIO_printf(bp, 
-					 "\n    Revocation Reason: %s (0x%lx)",
-					       OCSP_crl_reason_str(l), l) <= 0)
-				        goto err;
-				}
-			}
-		if (BIO_printf(bp,"\n    This Update: ") <= 0) goto err;
-		if (!ASN1_GENERALIZEDTIME_print(bp, single->thisUpdate)) 
-			goto err;
-		if (single->nextUpdate)
-		        {
-			if (BIO_printf(bp,"\n    Next Update: ") <= 0)goto err;
-			if (!ASN1_GENERALIZEDTIME_print(bp,single->nextUpdate))
-				goto err;
-			}
-		if (!BIO_write(bp,"\n",1)) goto err;
-		if (!X509V3_extensions_print(bp,
-					"Response Single Extensions",
-					single->singleExtensions, flags, 8))
-							goto err;
-		if (!BIO_write(bp,"\n",1)) goto err;
-		}
-	if (!X509V3_extensions_print(bp, "Response Extensions",
-					rd->responseExtensions, flags, 4))
-	if(X509_signature_print(bp, br->signatureAlgorithm, br->signature) <= 0)
-							goto err;
-
-	for (i=0; i<sk_X509_num(br->certs); i++)
-		{
-		X509_print(bp, sk_X509_value(br->certs,i));
-		PEM_write_bio_X509(bp,sk_X509_value(br->certs,i));
-		}
-
-	ret = 1;
-err:
-	OCSP_BASICRESP_free(br);
-	return ret;
-	}
diff --git a/crypto/openssl/crypto/ocsp/ocsp_srv.c b/crypto/openssl/crypto/ocsp/ocsp_srv.c
deleted file mode 100755
index fffa134e7541..000000000000
--- a/crypto/openssl/crypto/ocsp/ocsp_srv.c
+++ /dev/null
@@ -1,264 +0,0 @@
-/* ocsp_srv.c */
-/* Written by Dr Stephen N Henson (shenson@bigfoot.com) for the OpenSSL
- * project 2001.
- */
-/* ====================================================================
- * Copyright (c) 1998-2001 The OpenSSL Project.  All rights reserved.
- *
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions
- * are met:
- *
- * 1. Redistributions of source code must retain the above copyright
- *    notice, this list of conditions and the following disclaimer. 
- *
- * 2. Redistributions in binary form must reproduce the above copyright
- *    notice, this list of conditions and the following disclaimer in
- *    the documentation and/or other materials provided with the
- *    distribution.
- *
- * 3. All advertising materials mentioning features or use of this
- *    software must display the following acknowledgment:
- *    "This product includes software developed by the OpenSSL Project
- *    for use in the OpenSSL Toolkit. (http://www.openssl.org/)"
- *
- * 4. The names "OpenSSL Toolkit" and "OpenSSL Project" must not be used to
- *    endorse or promote products derived from this software without
- *    prior written permission. For written permission, please contact
- *    openssl-core@openssl.org.
- *
- * 5. Products derived from this software may not be called "OpenSSL"
- *    nor may "OpenSSL" appear in their names without prior written
- *    permission of the OpenSSL Project.
- *
- * 6. Redistributions of any form whatsoever must retain the following
- *    acknowledgment:
- *    "This product includes software developed by the OpenSSL Project
- *    for use in the OpenSSL Toolkit (http://www.openssl.org/)"
- *
- * THIS SOFTWARE IS PROVIDED BY THE OpenSSL PROJECT ``AS IS'' AND ANY
- * EXPRESSED OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
- * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR
- * PURPOSE ARE DISCLAIMED.  IN NO EVENT SHALL THE OpenSSL PROJECT OR
- * ITS CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
- * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
- * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
- * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
- * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
- * STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
- * ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED
- * OF THE POSSIBILITY OF SUCH DAMAGE.
- * ====================================================================
- *
- * This product includes cryptographic software written by Eric Young
- * (eay@cryptsoft.com).  This product includes software written by Tim
- * Hudson (tjh@cryptsoft.com).
- *
- */
-
-#include <stdio.h>
-#include <cryptlib.h>
-#include <openssl/objects.h>
-#include <openssl/rand.h>
-#include <openssl/x509.h>
-#include <openssl/pem.h>
-#include <openssl/x509v3.h>
-#include <openssl/ocsp.h>
-
-/* Utility functions related to sending OCSP responses and extracting
- * relevant information from the request.
- */
-
-int OCSP_request_onereq_count(OCSP_REQUEST *req)
-	{
-	return sk_OCSP_ONEREQ_num(req->tbsRequest->requestList);
-	}
-
-OCSP_ONEREQ *OCSP_request_onereq_get0(OCSP_REQUEST *req, int i)
-	{
-	return sk_OCSP_ONEREQ_value(req->tbsRequest->requestList, i);
-	}
-
-OCSP_CERTID *OCSP_onereq_get0_id(OCSP_ONEREQ *one)
-	{
-	return one->reqCert;
-	}
-
-int OCSP_id_get0_info(ASN1_OCTET_STRING **piNameHash, ASN1_OBJECT **pmd,
-			ASN1_OCTET_STRING **pikeyHash,
-			ASN1_INTEGER **pserial, OCSP_CERTID *cid)
-	{
-	if (!cid) return 0;
-	if (pmd) *pmd = cid->hashAlgorithm->algorithm;
-	if(piNameHash) *piNameHash = cid->issuerNameHash;
-	if (pikeyHash) *pikeyHash = cid->issuerKeyHash;
-	if (pserial) *pserial = cid->serialNumber;
-	return 1;
-	}
-
-int OCSP_request_is_signed(OCSP_REQUEST *req)
-	{
-	if(req->optionalSignature) return 1;
-	return 0;
-	}
-
-/* Create an OCSP response and encode an optional basic response */
-OCSP_RESPONSE *OCSP_response_create(int status, OCSP_BASICRESP *bs)
-        {
-        OCSP_RESPONSE *rsp = NULL;
-
-	if (!(rsp = OCSP_RESPONSE_new())) goto err;
-	if (!(ASN1_ENUMERATED_set(rsp->responseStatus, status))) goto err;
-	if (!bs) return rsp;
-	if (!(rsp->responseBytes = OCSP_RESPBYTES_new())) goto err;
-	rsp->responseBytes->responseType = OBJ_nid2obj(NID_id_pkix_OCSP_basic);
-	if (!ASN1_item_pack(bs, ASN1_ITEM_rptr(OCSP_BASICRESP), &rsp->responseBytes->response))
-				goto err;
-	return rsp;
-err:
-	if (rsp) OCSP_RESPONSE_free(rsp);
-	return NULL;
-	}
-
-
-OCSP_SINGLERESP *OCSP_basic_add1_status(OCSP_BASICRESP *rsp,
-						OCSP_CERTID *cid,
-						int status, int reason,
-						ASN1_TIME *revtime,
-					ASN1_TIME *thisupd, ASN1_TIME *nextupd)
-	{
-	OCSP_SINGLERESP *single = NULL;
-	OCSP_CERTSTATUS *cs;
-	OCSP_REVOKEDINFO *ri;
-
-	if(!rsp->tbsResponseData->responses &&
-	    !(rsp->tbsResponseData->responses = sk_OCSP_SINGLERESP_new_null()))
-		goto err;
-
-	if (!(single = OCSP_SINGLERESP_new()))
-		goto err;
-
-
-
-	if (!ASN1_TIME_to_generalizedtime(thisupd, &single->thisUpdate))
-		goto err;
-	if (nextupd &&
-		!ASN1_TIME_to_generalizedtime(nextupd, &single->nextUpdate))
-		goto err;
-
-	OCSP_CERTID_free(single->certId);
-
-	if(!(single->certId = OCSP_CERTID_dup(cid)))
-		goto err;
-
-	cs = single->certStatus;
-	switch(cs->type = status)
-		{
-	case V_OCSP_CERTSTATUS_REVOKED:
-		if (!revtime)
-		        {
-		        OCSPerr(OCSP_F_OCSP_BASIC_ADD1_STATUS,OCSP_R_NO_REVOKED_TIME);
-			goto err;
-		        }
-		if (!(cs->value.revoked = ri = OCSP_REVOKEDINFO_new())) goto err;
-		if (!ASN1_TIME_to_generalizedtime(revtime, &ri->revocationTime))
-			goto err;	
-		if (reason != OCSP_REVOKED_STATUS_NOSTATUS)
-		        {
-			if (!(ri->revocationReason = ASN1_ENUMERATED_new())) 
-			        goto err;
-			if (!(ASN1_ENUMERATED_set(ri->revocationReason, 
-						  reason)))
-			        goto err;	
-			}
-		break;
-
-	case V_OCSP_CERTSTATUS_GOOD:
-		cs->value.good = ASN1_NULL_new();
-		break;
-
-	case V_OCSP_CERTSTATUS_UNKNOWN:
-		cs->value.unknown = ASN1_NULL_new();
-		break;
-
-	default:
-		goto err;
-
-		}
-	if (!(sk_OCSP_SINGLERESP_push(rsp->tbsResponseData->responses, single)))
-		goto err;
-	return single;
-err:
-	OCSP_SINGLERESP_free(single);
-	return NULL;
-	}
-
-/* Add a certificate to an OCSP request */
-
-int OCSP_basic_add1_cert(OCSP_BASICRESP *resp, X509 *cert)
-	{
-	if (!resp->certs && !(resp->certs = sk_X509_new_null()))
-		return 0;
-
-	if(!sk_X509_push(resp->certs, cert)) return 0;
-	CRYPTO_add(&cert->references, 1, CRYPTO_LOCK_X509);
-	return 1;
-	}
-
-int OCSP_basic_sign(OCSP_BASICRESP *brsp, 
-			X509 *signer, EVP_PKEY *key, const EVP_MD *dgst,
-			STACK_OF(X509) *certs, unsigned long flags)
-        {
-	int i;
-	OCSP_RESPID *rid;
-
-	if (!X509_check_private_key(signer, key))
-		{
-		OCSPerr(OCSP_F_OCSP_BASIC_SIGN, OCSP_R_PRIVATE_KEY_DOES_NOT_MATCH_CERTIFICATE);
-		goto err;
-		}
-
-	if(!(flags & OCSP_NOCERTS))
-		{
-		if(!OCSP_basic_add1_cert(brsp, signer))
-			goto err;
-		for (i = 0; i < sk_X509_num(certs); i++)
-			{
-			X509 *tmpcert = sk_X509_value(certs, i);
-			if(!OCSP_basic_add1_cert(brsp, tmpcert))
-				goto err;
-			}
-		}
-
-	rid = brsp->tbsResponseData->responderId;
-	if (flags & OCSP_RESPID_KEY)
-		{
-		unsigned char md[SHA_DIGEST_LENGTH];
-		X509_pubkey_digest(signer, EVP_sha1(), md, NULL);
-		if (!(rid->value.byKey = ASN1_OCTET_STRING_new()))
-			goto err;
-		if (!(ASN1_OCTET_STRING_set(rid->value.byKey, md, SHA_DIGEST_LENGTH)))
-				goto err;
-		rid->type = V_OCSP_RESPID_KEY;
-		}
-	else
-		{
-		if (!X509_NAME_set(&rid->value.byName,
-					X509_get_subject_name(signer)))
-				goto err;
-		rid->type = V_OCSP_RESPID_NAME;
-		}
-
-	if (!(flags & OCSP_NOTIME) &&
-		!X509_gmtime_adj(brsp->tbsResponseData->producedAt, 0))
-		goto err;
-
-	/* Right now, I think that not doing double hashing is the right
-	   thing.	-- Richard Levitte */
-
-	if (!OCSP_BASICRESP_sign(brsp, key, dgst, 0)) goto err;
-
-	return 1;
-err:
-	return 0;
-	}
diff --git a/crypto/openssl/crypto/ocsp/ocsp_vfy.c b/crypto/openssl/crypto/ocsp/ocsp_vfy.c
deleted file mode 100644
index 23ea41c847bf..000000000000
--- a/crypto/openssl/crypto/ocsp/ocsp_vfy.c
+++ /dev/null
@@ -1,444 +0,0 @@
-/* ocsp_vfy.c */
-/* Written by Dr Stephen N Henson (shenson@bigfoot.com) for the OpenSSL
- * project 2000.
- */
-/* ====================================================================
- * Copyright (c) 2000-2004 The OpenSSL Project.  All rights reserved.
- *
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions
- * are met:
- *
- * 1. Redistributions of source code must retain the above copyright
- *    notice, this list of conditions and the following disclaimer. 
- *
- * 2. Redistributions in binary form must reproduce the above copyright
- *    notice, this list of conditions and the following disclaimer in
- *    the documentation and/or other materials provided with the
- *    distribution.
- *
- * 3. All advertising materials mentioning features or use of this
- *    software must display the following acknowledgment:
- *    "This product includes software developed by the OpenSSL Project
- *    for use in the OpenSSL Toolkit. (http://www.OpenSSL.org/)"
- *
- * 4. The names "OpenSSL Toolkit" and "OpenSSL Project" must not be used to
- *    endorse or promote products derived from this software without
- *    prior written permission. For written permission, please contact
- *    licensing@OpenSSL.org.
- *
- * 5. Products derived from this software may not be called "OpenSSL"
- *    nor may "OpenSSL" appear in their names without prior written
- *    permission of the OpenSSL Project.
- *
- * 6. Redistributions of any form whatsoever must retain the following
- *    acknowledgment:
- *    "This product includes software developed by the OpenSSL Project
- *    for use in the OpenSSL Toolkit (http://www.OpenSSL.org/)"
- *
- * THIS SOFTWARE IS PROVIDED BY THE OpenSSL PROJECT ``AS IS'' AND ANY
- * EXPRESSED OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
- * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR
- * PURPOSE ARE DISCLAIMED.  IN NO EVENT SHALL THE OpenSSL PROJECT OR
- * ITS CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
- * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
- * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
- * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
- * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
- * STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
- * ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED
- * OF THE POSSIBILITY OF SUCH DAMAGE.
- * ====================================================================
- *
- * This product includes cryptographic software written by Eric Young
- * (eay@cryptsoft.com).  This product includes software written by Tim
- * Hudson (tjh@cryptsoft.com).
- *
- */
-
-#include <openssl/ocsp.h>
-#include <openssl/err.h>
-#include <string.h>
-
-static int ocsp_find_signer(X509 **psigner, OCSP_BASICRESP *bs, STACK_OF(X509) *certs,
-				X509_STORE *st, unsigned long flags);
-static X509 *ocsp_find_signer_sk(STACK_OF(X509) *certs, OCSP_RESPID *id);
-static int ocsp_check_issuer(OCSP_BASICRESP *bs, STACK_OF(X509) *chain, unsigned long flags);
-static int ocsp_check_ids(STACK_OF(OCSP_SINGLERESP) *sresp, OCSP_CERTID **ret);
-static int ocsp_match_issuerid(X509 *cert, OCSP_CERTID *cid, STACK_OF(OCSP_SINGLERESP) *sresp);
-static int ocsp_check_delegated(X509 *x, int flags);
-static int ocsp_req_find_signer(X509 **psigner, OCSP_REQUEST *req, X509_NAME *nm, STACK_OF(X509) *certs,
-				X509_STORE *st, unsigned long flags);
-
-/* Verify a basic response message */
-
-int OCSP_basic_verify(OCSP_BASICRESP *bs, STACK_OF(X509) *certs,
-				X509_STORE *st, unsigned long flags)
-	{
-	X509 *signer, *x;
-	STACK_OF(X509) *chain = NULL;
-	X509_STORE_CTX ctx;
-	int i, ret = 0;
-	ret = ocsp_find_signer(&signer, bs, certs, st, flags);
-	if (!ret)
-		{
-		OCSPerr(OCSP_F_OCSP_BASIC_VERIFY, OCSP_R_SIGNER_CERTIFICATE_NOT_FOUND);
-		goto end;
-		}
-	if ((ret == 2) && (flags & OCSP_TRUSTOTHER))
-		flags |= OCSP_NOVERIFY;
-	if (!(flags & OCSP_NOSIGS))
-		{
-		EVP_PKEY *skey;
-		skey = X509_get_pubkey(signer);
-		ret = OCSP_BASICRESP_verify(bs, skey, 0);
-		EVP_PKEY_free(skey);
-		if(ret <= 0)
-			{
-			OCSPerr(OCSP_F_OCSP_BASIC_VERIFY, OCSP_R_SIGNATURE_FAILURE);
-			goto end;
-			}
-		}
-	if (!(flags & OCSP_NOVERIFY))
-		{
-		int init_res;
-		if(flags & OCSP_NOCHAIN)
-			init_res = X509_STORE_CTX_init(&ctx, st, signer, NULL);
-		else
-			init_res = X509_STORE_CTX_init(&ctx, st, signer, bs->certs);
-		if(!init_res)
-			{
-			OCSPerr(OCSP_F_OCSP_BASIC_VERIFY,ERR_R_X509_LIB);
-			goto end;
-			}
-
-		X509_STORE_CTX_set_purpose(&ctx, X509_PURPOSE_OCSP_HELPER);
-		ret = X509_verify_cert(&ctx);
-		chain = X509_STORE_CTX_get1_chain(&ctx);
-		X509_STORE_CTX_cleanup(&ctx);
-                if (ret <= 0)
-			{
-			i = X509_STORE_CTX_get_error(&ctx);	
-			OCSPerr(OCSP_F_OCSP_BASIC_VERIFY,OCSP_R_CERTIFICATE_VERIFY_ERROR);
-			ERR_add_error_data(2, "Verify error:",
-					X509_verify_cert_error_string(i));
-                        goto end;
-                	}
-		if(flags & OCSP_NOCHECKS)
-			{
-			ret = 1;
-			goto end;
-			}
-		/* At this point we have a valid certificate chain
-		 * need to verify it against the OCSP issuer criteria.
-		 */
-		ret = ocsp_check_issuer(bs, chain, flags);
-
-		/* If fatal error or valid match then finish */
-		if (ret != 0) goto end;
-
-		/* Easy case: explicitly trusted. Get root CA and
-		 * check for explicit trust
-		 */
-		if(flags & OCSP_NOEXPLICIT) goto end;
-
-		x = sk_X509_value(chain, sk_X509_num(chain) - 1);
-		if(X509_check_trust(x, NID_OCSP_sign, 0) != X509_TRUST_TRUSTED)
-			{
-			OCSPerr(OCSP_F_OCSP_BASIC_VERIFY,OCSP_R_ROOT_CA_NOT_TRUSTED);
-			goto end;
-			}
-		ret = 1;
-		}
-
-
-
-	end:
-	if(chain) sk_X509_pop_free(chain, X509_free);
-	return ret;
-	}
-
-
-static int ocsp_find_signer(X509 **psigner, OCSP_BASICRESP *bs, STACK_OF(X509) *certs,
-				X509_STORE *st, unsigned long flags)
-	{
-	X509 *signer;
-	OCSP_RESPID *rid = bs->tbsResponseData->responderId;
-	if ((signer = ocsp_find_signer_sk(certs, rid)))
-		{
-		*psigner = signer;
-		return 2;
-		}
-	if(!(flags & OCSP_NOINTERN) &&
-	    (signer = ocsp_find_signer_sk(bs->certs, rid)))
-		{
-		*psigner = signer;
-		return 1;
-		}
-	/* Maybe lookup from store if by subject name */
-
-	*psigner = NULL;
-	return 0;
-	}
-
-
-static X509 *ocsp_find_signer_sk(STACK_OF(X509) *certs, OCSP_RESPID *id)
-	{
-	int i;
-	unsigned char tmphash[SHA_DIGEST_LENGTH], *keyhash;
-	X509 *x;
-
-	/* Easy if lookup by name */
-	if (id->type == V_OCSP_RESPID_NAME)
-		return X509_find_by_subject(certs, id->value.byName);
-
-	/* Lookup by key hash */
-
-	/* If key hash isn't SHA1 length then forget it */
-	if (id->value.byKey->length != SHA_DIGEST_LENGTH) return NULL;
-	keyhash = id->value.byKey->data;
-	/* Calculate hash of each key and compare */
-	for (i = 0; i < sk_X509_num(certs); i++)
-		{
-		x = sk_X509_value(certs, i);
-		X509_pubkey_digest(x, EVP_sha1(), tmphash, NULL);
-		if(!memcmp(keyhash, tmphash, SHA_DIGEST_LENGTH))
-			return x;
-		}
-	return NULL;
-	}
-
-
-static int ocsp_check_issuer(OCSP_BASICRESP *bs, STACK_OF(X509) *chain, unsigned long flags)
-	{
-	STACK_OF(OCSP_SINGLERESP) *sresp;
-	X509 *signer, *sca;
-	OCSP_CERTID *caid = NULL;
-	int i;
-	sresp = bs->tbsResponseData->responses;
-
-	if (sk_X509_num(chain) <= 0)
-		{
-		OCSPerr(OCSP_F_OCSP_CHECK_ISSUER, OCSP_R_NO_CERTIFICATES_IN_CHAIN);
-		return -1;
-		}
-
-	/* See if the issuer IDs match. */
-	i = ocsp_check_ids(sresp, &caid);
-
-	/* If ID mismatch or other error then return */
-	if (i <= 0) return i;
-
-	signer = sk_X509_value(chain, 0);
-	/* Check to see if OCSP responder CA matches request CA */
-	if (sk_X509_num(chain) > 1)
-		{
-		sca = sk_X509_value(chain, 1);
-		i = ocsp_match_issuerid(sca, caid, sresp);
-		if (i < 0) return i;
-		if (i)
-			{
-			/* We have a match, if extensions OK then success */
-			if (ocsp_check_delegated(signer, flags)) return 1;
-			return 0;
-			}
-		}
-
-	/* Otherwise check if OCSP request signed directly by request CA */
-	return ocsp_match_issuerid(signer, caid, sresp);
-	}
-
-
-/* Check the issuer certificate IDs for equality. If there is a mismatch with the same
- * algorithm then there's no point trying to match any certificates against the issuer.
- * If the issuer IDs all match then we just need to check equality against one of them.
- */
-	
-static int ocsp_check_ids(STACK_OF(OCSP_SINGLERESP) *sresp, OCSP_CERTID **ret)
-	{
-	OCSP_CERTID *tmpid, *cid;
-	int i, idcount;
-
-	idcount = sk_OCSP_SINGLERESP_num(sresp);
-	if (idcount <= 0)
-		{
-		OCSPerr(OCSP_F_OCSP_CHECK_IDS, OCSP_R_RESPONSE_CONTAINS_NO_REVOCATION_DATA);
-		return -1;
-		}
-
-	cid = sk_OCSP_SINGLERESP_value(sresp, 0)->certId;
-
-	*ret = NULL;
-
-	for (i = 1; i < idcount; i++)
-		{
-		tmpid = sk_OCSP_SINGLERESP_value(sresp, i)->certId;
-		/* Check to see if IDs match */
-		if (OCSP_id_issuer_cmp(cid, tmpid))
-			{
-			/* If algoritm mismatch let caller deal with it */
-			if (OBJ_cmp(tmpid->hashAlgorithm->algorithm,
-					cid->hashAlgorithm->algorithm))
-					return 2;
-			/* Else mismatch */
-			return 0;
-			}
-		}
-
-	/* All IDs match: only need to check one ID */
-	*ret = cid;
-	return 1;
-	}
-
-
-static int ocsp_match_issuerid(X509 *cert, OCSP_CERTID *cid,
-			STACK_OF(OCSP_SINGLERESP) *sresp)
-	{
-	/* If only one ID to match then do it */
-	if(cid)
-		{
-		const EVP_MD *dgst;
-		X509_NAME *iname;
-		int mdlen;
-		unsigned char md[EVP_MAX_MD_SIZE];
-		if (!(dgst = EVP_get_digestbyobj(cid->hashAlgorithm->algorithm)))
-			{
-			OCSPerr(OCSP_F_OCSP_MATCH_ISSUERID, OCSP_R_UNKNOWN_MESSAGE_DIGEST);
-			return -1;
-			}
-
-		mdlen = EVP_MD_size(dgst);
-		if ((cid->issuerNameHash->length != mdlen) ||
-		   (cid->issuerKeyHash->length != mdlen))
-			return 0;
-		iname = X509_get_subject_name(cert);
-		if (!X509_NAME_digest(iname, dgst, md, NULL))
-			return -1;
-		if (memcmp(md, cid->issuerNameHash->data, mdlen))
-			return 0;
-		X509_pubkey_digest(cert, EVP_sha1(), md, NULL);
-		if (memcmp(md, cid->issuerKeyHash->data, mdlen))
-			return 0;
-
-		return 1;
-
-		}
-	else
-		{
-		/* We have to match the whole lot */
-		int i, ret;
-		OCSP_CERTID *tmpid;
-		for (i = 0; i < sk_OCSP_SINGLERESP_num(sresp); i++)
-			{
-			tmpid = sk_OCSP_SINGLERESP_value(sresp, i)->certId;
-			ret = ocsp_match_issuerid(cert, tmpid, NULL);
-			if (ret <= 0) return ret;
-			}
-		return 1;
-		}
-			
-	}
-
-static int ocsp_check_delegated(X509 *x, int flags)
-	{
-	X509_check_purpose(x, -1, 0);
-	if ((x->ex_flags & EXFLAG_XKUSAGE) &&
-	    (x->ex_xkusage & XKU_OCSP_SIGN))
-		return 1;
-	OCSPerr(OCSP_F_OCSP_CHECK_DELEGATED, OCSP_R_MISSING_OCSPSIGNING_USAGE);
-	return 0;
-	}
-
-/* Verify an OCSP request. This is fortunately much easier than OCSP
- * response verify. Just find the signers certificate and verify it
- * against a given trust value.
- */
-
-int OCSP_request_verify(OCSP_REQUEST *req, STACK_OF(X509) *certs, X509_STORE *store, unsigned long flags)
-        {
-	X509 *signer;
-	X509_NAME *nm;
-	GENERAL_NAME *gen;
-	int ret;
-	X509_STORE_CTX ctx;
-	if (!req->optionalSignature) 
-		{
-		OCSPerr(OCSP_F_OCSP_REQUEST_VERIFY, OCSP_R_REQUEST_NOT_SIGNED);
-		return 0;
-		}
-	gen = req->tbsRequest->requestorName;
-	if (!gen || gen->type != GEN_DIRNAME)
-		{
-		OCSPerr(OCSP_F_OCSP_REQUEST_VERIFY, OCSP_R_UNSUPPORTED_REQUESTORNAME_TYPE);
-		return 0;
-		}
-	nm = gen->d.directoryName;
-	ret = ocsp_req_find_signer(&signer, req, nm, certs, store, flags);
-	if (ret <= 0)
-		{
-		OCSPerr(OCSP_F_OCSP_REQUEST_VERIFY, OCSP_R_SIGNER_CERTIFICATE_NOT_FOUND);
-		return 0;
-		}
-	if ((ret == 2) && (flags & OCSP_TRUSTOTHER))
-		flags |= OCSP_NOVERIFY;
-	if (!(flags & OCSP_NOSIGS))
-		{
-		EVP_PKEY *skey;
-		skey = X509_get_pubkey(signer);
-		ret = OCSP_REQUEST_verify(req, skey);
-		EVP_PKEY_free(skey);
-		if(ret <= 0)
-			{
-			OCSPerr(OCSP_F_OCSP_REQUEST_VERIFY, OCSP_R_SIGNATURE_FAILURE);
-			return 0;
-			}
-		}
-	if (!(flags & OCSP_NOVERIFY))
-		{
-		int init_res;
-		if(flags & OCSP_NOCHAIN)
-			init_res = X509_STORE_CTX_init(&ctx, store, signer, NULL);
-		else
-			init_res = X509_STORE_CTX_init(&ctx, store, signer,
-					req->optionalSignature->certs);
-		if(!init_res)
-			{
-			OCSPerr(OCSP_F_OCSP_REQUEST_VERIFY,ERR_R_X509_LIB);
-			return 0;
-			}
-
-		X509_STORE_CTX_set_purpose(&ctx, X509_PURPOSE_OCSP_HELPER);
-		X509_STORE_CTX_set_trust(&ctx, X509_TRUST_OCSP_REQUEST);
-		ret = X509_verify_cert(&ctx);
-		X509_STORE_CTX_cleanup(&ctx);
-                if (ret <= 0)
-			{
-			ret = X509_STORE_CTX_get_error(&ctx);	
-			OCSPerr(OCSP_F_OCSP_REQUEST_VERIFY,OCSP_R_CERTIFICATE_VERIFY_ERROR);
-			ERR_add_error_data(2, "Verify error:",
-					X509_verify_cert_error_string(ret));
-                        return 0;
-                	}
-		}
-	return 1;
-        }
-
-static int ocsp_req_find_signer(X509 **psigner, OCSP_REQUEST *req, X509_NAME *nm, STACK_OF(X509) *certs,
-				X509_STORE *st, unsigned long flags)
-	{
-	X509 *signer;
-	if(!(flags & OCSP_NOINTERN))
-		{
-		signer = X509_find_by_subject(req->optionalSignature->certs, nm);
-		*psigner = signer;
-		return 1;
-		}
-
-	signer = X509_find_by_subject(certs, nm);
-	if (signer)
-		{
-		*psigner = signer;
-		return 2;
-		}
-	return 0;
-	}
diff --git a/crypto/openssl/crypto/opensslconf.h b/crypto/openssl/crypto/opensslconf.h
deleted file mode 100644
index 4620e0e530e4..000000000000
--- a/crypto/openssl/crypto/opensslconf.h
+++ /dev/null
@@ -1,214 +0,0 @@
-/* opensslconf.h */
-/* WARNING: Generated automatically from opensslconf.h.in by Configure. */
-
-/* OpenSSL was configured with the following options: */
-#ifndef OPENSSL_DOING_MAKEDEPEND
-
-#ifndef OPENSSL_NO_CAMELLIA
-# define OPENSSL_NO_CAMELLIA
-#endif
-#ifndef OPENSSL_NO_GMP
-# define OPENSSL_NO_GMP
-#endif
-#ifndef OPENSSL_NO_KRB5
-# define OPENSSL_NO_KRB5
-#endif
-#ifndef OPENSSL_NO_MDC2
-# define OPENSSL_NO_MDC2
-#endif
-#ifndef OPENSSL_NO_RC5
-# define OPENSSL_NO_RC5
-#endif
-#ifndef OPENSSL_NO_RFC3779
-# define OPENSSL_NO_RFC3779
-#endif
-
-#endif /* OPENSSL_DOING_MAKEDEPEND */
-#ifndef OPENSSL_NO_DYNAMIC_ENGINE
-# define OPENSSL_NO_DYNAMIC_ENGINE
-#endif
-
-/* The OPENSSL_NO_* macros are also defined as NO_* if the application
-   asks for it.  This is a transient feature that is provided for those
-   who haven't had the time to do the appropriate changes in their
-   applications.  */
-#ifdef OPENSSL_ALGORITHM_DEFINES
-# if defined(OPENSSL_NO_CAMELLIA) && !defined(NO_CAMELLIA)
-#  define NO_CAMELLIA
-# endif
-# if defined(OPENSSL_NO_GMP) && !defined(NO_GMP)
-#  define NO_GMP
-# endif
-# if defined(OPENSSL_NO_KRB5) && !defined(NO_KRB5)
-#  define NO_KRB5
-# endif
-# if defined(OPENSSL_NO_MDC2) && !defined(NO_MDC2)
-#  define NO_MDC2
-# endif
-# if defined(OPENSSL_NO_RC5) && !defined(NO_RC5)
-#  define NO_RC5
-# endif
-# if defined(OPENSSL_NO_RFC3779) && !defined(NO_RFC3779)
-#  define NO_RFC3779
-# endif
-#endif
-
-/* crypto/opensslconf.h.in */
-
-/* Generate 80386 code? */
-#undef I386_ONLY
-
-#if !(defined(VMS) || defined(__VMS)) /* VMS uses logical names instead */
-#if defined(HEADER_CRYPTLIB_H) && !defined(OPENSSLDIR)
-#define ENGINESDIR "/usr/local/ssl/lib/engines"
-#define OPENSSLDIR "/usr/local/ssl"
-#endif
-#endif
-
-#undef OPENSSL_UNISTD
-#define OPENSSL_UNISTD <unistd.h>
-
-#undef OPENSSL_EXPORT_VAR_AS_FUNCTION
-
-#if defined(HEADER_IDEA_H) && !defined(IDEA_INT)
-#define IDEA_INT unsigned int
-#endif
-
-#if defined(HEADER_MD2_H) && !defined(MD2_INT)
-#define MD2_INT unsigned int
-#endif
-
-#if defined(HEADER_RC2_H) && !defined(RC2_INT)
-/* I need to put in a mod for the alpha - eay */
-#define RC2_INT unsigned int
-#endif
-
-#if defined(HEADER_RC4_H)
-#if !defined(RC4_INT)
-/* using int types make the structure larger but make the code faster
- * on most boxes I have tested - up to %20 faster. */
-/*
- * I don't know what does "most" mean, but declaring "int" is a must on:
- * - Intel P6 because partial register stalls are very expensive;
- * - elder Alpha because it lacks byte load/store instructions;
- */
-#define RC4_INT unsigned int
-#endif
-#if !defined(RC4_CHUNK)
-/*
- * This enables code handling data aligned at natural CPU word
- * boundary. See crypto/rc4/rc4_enc.c for further details.
- */
-#undef RC4_CHUNK
-#endif
-#endif
-
-#if (defined(HEADER_NEW_DES_H) || defined(HEADER_DES_H)) && !defined(DES_LONG)
-/* If this is set to 'unsigned int' on a DEC Alpha, this gives about a
- * %20 speed up (longs are 8 bytes, int's are 4). */
-#ifndef DES_LONG
-#define DES_LONG unsigned long
-#endif
-#endif
-
-#if defined(HEADER_BN_H) && !defined(CONFIG_HEADER_BN_H)
-#define CONFIG_HEADER_BN_H
-#undef BN_LLONG
-
-/* Should we define BN_DIV2W here? */
-
-/* Only one for the following should be defined */
-/* The prime number generation stuff may not work when
- * EIGHT_BIT but I don't care since I've only used this mode
- * for debuging the bignum libraries */
-#undef SIXTY_FOUR_BIT_LONG
-#undef SIXTY_FOUR_BIT
-#define THIRTY_TWO_BIT
-#undef SIXTEEN_BIT
-#undef EIGHT_BIT
-#endif
-
-#if defined(HEADER_RC4_LOCL_H) && !defined(CONFIG_HEADER_RC4_LOCL_H)
-#define CONFIG_HEADER_RC4_LOCL_H
-/* if this is defined data[i] is used instead of *data, this is a %20
- * speedup on x86 */
-#undef RC4_INDEX
-#endif
-
-#if defined(HEADER_BF_LOCL_H) && !defined(CONFIG_HEADER_BF_LOCL_H)
-#define CONFIG_HEADER_BF_LOCL_H
-#undef BF_PTR
-#endif /* HEADER_BF_LOCL_H */
-
-#if defined(HEADER_DES_LOCL_H) && !defined(CONFIG_HEADER_DES_LOCL_H)
-#define CONFIG_HEADER_DES_LOCL_H
-#ifndef DES_DEFAULT_OPTIONS
-/* the following is tweaked from a config script, that is why it is a
- * protected undef/define */
-#ifndef DES_PTR
-#undef DES_PTR
-#endif
-
-/* This helps C compiler generate the correct code for multiple functional
- * units.  It reduces register dependancies at the expense of 2 more
- * registers */
-#ifndef DES_RISC1
-#undef DES_RISC1
-#endif
-
-#ifndef DES_RISC2
-#undef DES_RISC2
-#endif
-
-#if defined(DES_RISC1) && defined(DES_RISC2)
-YOU SHOULD NOT HAVE BOTH DES_RISC1 AND DES_RISC2 DEFINED!!!!!
-#endif
-
-/* Unroll the inner loop, this sometimes helps, sometimes hinders.
- * Very mucy CPU dependant */
-#ifndef DES_UNROLL
-#undef DES_UNROLL
-#endif
-
-/* These default values were supplied by
- * Peter Gutman <pgut001@cs.auckland.ac.nz>
- * They are only used if nothing else has been defined */
-#if !defined(DES_PTR) && !defined(DES_RISC1) && !defined(DES_RISC2) && !defined(DES_UNROLL)
-/* Special defines which change the way the code is built depending on the
-   CPU and OS.  For SGI machines you can use _MIPS_SZLONG (32 or 64) to find
-   even newer MIPS CPU's, but at the moment one size fits all for
-   optimization options.  Older Sparc's work better with only UNROLL, but
-   there's no way to tell at compile time what it is you're running on */
- 
-#if defined( sun )		/* Newer Sparc's */
-#  define DES_PTR
-#  define DES_RISC1
-#  define DES_UNROLL
-#elif defined( __ultrix )	/* Older MIPS */
-#  define DES_PTR
-#  define DES_RISC2
-#  define DES_UNROLL
-#elif defined( __osf1__ )	/* Alpha */
-#  define DES_PTR
-#  define DES_RISC2
-#elif defined ( _AIX )		/* RS6000 */
-  /* Unknown */
-#elif defined( __hpux )		/* HP-PA */
-  /* Unknown */
-#elif defined( __aux )		/* 68K */
-  /* Unknown */
-#elif defined( __dgux )		/* 88K (but P6 in latest boxes) */
-#  define DES_UNROLL
-#elif defined( __sgi )		/* Newer MIPS */
-#  define DES_PTR
-#  define DES_RISC2
-#  define DES_UNROLL
-#elif defined(i386) || defined(__i386__)	/* x86 boxes, should be gcc */
-#  define DES_PTR
-#  define DES_RISC1
-#  define DES_UNROLL
-#endif /* Systems-specific speed defines */
-#endif
-
-#endif /* DES_DEFAULT_OPTIONS */
-#endif /* HEADER_DES_LOCL_H */
diff --git a/crypto/openssl/crypto/opensslconf.h.in b/crypto/openssl/crypto/opensslconf.h.in
deleted file mode 100644
index cee83acf9898..000000000000
--- a/crypto/openssl/crypto/opensslconf.h.in
+++ /dev/null
@@ -1,159 +0,0 @@
-/* crypto/opensslconf.h.in */
-
-/* Generate 80386 code? */
-#undef I386_ONLY
-
-#if !(defined(VMS) || defined(__VMS)) /* VMS uses logical names instead */
-#if defined(HEADER_CRYPTLIB_H) && !defined(OPENSSLDIR)
-#define ENGINESDIR "/usr/local/lib/engines"
-#define OPENSSLDIR "/usr/local/ssl"
-#endif
-#endif
-
-#undef OPENSSL_UNISTD
-#define OPENSSL_UNISTD <unistd.h>
-
-#undef OPENSSL_EXPORT_VAR_AS_FUNCTION
-
-#if defined(HEADER_IDEA_H) && !defined(IDEA_INT)
-#define IDEA_INT unsigned int
-#endif
-
-#if defined(HEADER_MD2_H) && !defined(MD2_INT)
-#define MD2_INT unsigned int
-#endif
-
-#if defined(HEADER_RC2_H) && !defined(RC2_INT)
-/* I need to put in a mod for the alpha - eay */
-#define RC2_INT unsigned int
-#endif
-
-#if defined(HEADER_RC4_H)
-#if !defined(RC4_INT)
-/* using int types make the structure larger but make the code faster
- * on most boxes I have tested - up to %20 faster. */
-/*
- * I don't know what does "most" mean, but declaring "int" is a must on:
- * - Intel P6 because partial register stalls are very expensive;
- * - elder Alpha because it lacks byte load/store instructions;
- */
-#define RC4_INT unsigned int
-#endif
-#if !defined(RC4_CHUNK)
-/*
- * This enables code handling data aligned at natural CPU word
- * boundary. See crypto/rc4/rc4_enc.c for further details.
- */
-#undef RC4_CHUNK
-#endif
-#endif
-
-#if (defined(HEADER_NEW_DES_H) || defined(HEADER_DES_H)) && !defined(DES_LONG)
-/* If this is set to 'unsigned int' on a DEC Alpha, this gives about a
- * %20 speed up (longs are 8 bytes, int's are 4). */
-#ifndef DES_LONG
-#define DES_LONG unsigned long
-#endif
-#endif
-
-#if defined(HEADER_BN_H) && !defined(CONFIG_HEADER_BN_H)
-#define CONFIG_HEADER_BN_H
-#undef BN_LLONG
-
-/* Should we define BN_DIV2W here? */
-
-/* Only one for the following should be defined */
-/* The prime number generation stuff may not work when
- * EIGHT_BIT but I don't care since I've only used this mode
- * for debuging the bignum libraries */
-#undef SIXTY_FOUR_BIT_LONG
-#undef SIXTY_FOUR_BIT
-#define THIRTY_TWO_BIT
-#undef SIXTEEN_BIT
-#undef EIGHT_BIT
-#endif
-
-#if defined(HEADER_RC4_LOCL_H) && !defined(CONFIG_HEADER_RC4_LOCL_H)
-#define CONFIG_HEADER_RC4_LOCL_H
-/* if this is defined data[i] is used instead of *data, this is a %20
- * speedup on x86 */
-#undef RC4_INDEX
-#endif
-
-#if defined(HEADER_BF_LOCL_H) && !defined(CONFIG_HEADER_BF_LOCL_H)
-#define CONFIG_HEADER_BF_LOCL_H
-#undef BF_PTR
-#endif /* HEADER_BF_LOCL_H */
-
-#if defined(HEADER_DES_LOCL_H) && !defined(CONFIG_HEADER_DES_LOCL_H)
-#define CONFIG_HEADER_DES_LOCL_H
-#ifndef DES_DEFAULT_OPTIONS
-/* the following is tweaked from a config script, that is why it is a
- * protected undef/define */
-#ifndef DES_PTR
-#undef DES_PTR
-#endif
-
-/* This helps C compiler generate the correct code for multiple functional
- * units.  It reduces register dependancies at the expense of 2 more
- * registers */
-#ifndef DES_RISC1
-#undef DES_RISC1
-#endif
-
-#ifndef DES_RISC2
-#undef DES_RISC2
-#endif
-
-#if defined(DES_RISC1) && defined(DES_RISC2)
-YOU SHOULD NOT HAVE BOTH DES_RISC1 AND DES_RISC2 DEFINED!!!!!
-#endif
-
-/* Unroll the inner loop, this sometimes helps, sometimes hinders.
- * Very mucy CPU dependant */
-#ifndef DES_UNROLL
-#undef DES_UNROLL
-#endif
-
-/* These default values were supplied by
- * Peter Gutman <pgut001@cs.auckland.ac.nz>
- * They are only used if nothing else has been defined */
-#if !defined(DES_PTR) && !defined(DES_RISC1) && !defined(DES_RISC2) && !defined(DES_UNROLL)
-/* Special defines which change the way the code is built depending on the
-   CPU and OS.  For SGI machines you can use _MIPS_SZLONG (32 or 64) to find
-   even newer MIPS CPU's, but at the moment one size fits all for
-   optimization options.  Older Sparc's work better with only UNROLL, but
-   there's no way to tell at compile time what it is you're running on */
- 
-#if defined( sun )		/* Newer Sparc's */
-#  define DES_PTR
-#  define DES_RISC1
-#  define DES_UNROLL
-#elif defined( __ultrix )	/* Older MIPS */
-#  define DES_PTR
-#  define DES_RISC2
-#  define DES_UNROLL
-#elif defined( __osf1__ )	/* Alpha */
-#  define DES_PTR
-#  define DES_RISC2
-#elif defined ( _AIX )		/* RS6000 */
-  /* Unknown */
-#elif defined( __hpux )		/* HP-PA */
-  /* Unknown */
-#elif defined( __aux )		/* 68K */
-  /* Unknown */
-#elif defined( __dgux )		/* 88K (but P6 in latest boxes) */
-#  define DES_UNROLL
-#elif defined( __sgi )		/* Newer MIPS */
-#  define DES_PTR
-#  define DES_RISC2
-#  define DES_UNROLL
-#elif defined(i386) || defined(__i386__)	/* x86 boxes, should be gcc */
-#  define DES_PTR
-#  define DES_RISC1
-#  define DES_UNROLL
-#endif /* Systems-specific speed defines */
-#endif
-
-#endif /* DES_DEFAULT_OPTIONS */
-#endif /* HEADER_DES_LOCL_H */
diff --git a/crypto/openssl/crypto/opensslv.h b/crypto/openssl/crypto/opensslv.h
deleted file mode 100644
index 8a5b34e4f077..000000000000
--- a/crypto/openssl/crypto/opensslv.h
+++ /dev/null
@@ -1,89 +0,0 @@
-#ifndef HEADER_OPENSSLV_H
-#define HEADER_OPENSSLV_H
-
-/* Numeric release version identifier:
- * MNNFFPPS: major minor fix patch status
- * The status nibble has one of the values 0 for development, 1 to e for betas
- * 1 to 14, and f for release.  The patch level is exactly that.
- * For example:
- * 0.9.3-dev	  0x00903000
- * 0.9.3-beta1	  0x00903001
- * 0.9.3-beta2-dev 0x00903002
- * 0.9.3-beta2    0x00903002 (same as ...beta2-dev)
- * 0.9.3	  0x0090300f
- * 0.9.3a	  0x0090301f
- * 0.9.4	  0x0090400f
- * 1.2.3z	  0x102031af
- *
- * For continuity reasons (because 0.9.5 is already out, and is coded
- * 0x00905100), between 0.9.5 and 0.9.6 the coding of the patch level
- * part is slightly different, by setting the highest bit.  This means
- * that 0.9.5a looks like this: 0x0090581f.  At 0.9.6, we can start
- * with 0x0090600S...
- *
- * (Prior to 0.9.3-dev a different scheme was used: 0.9.2b is 0x0922.)
- * (Prior to 0.9.5a beta1, a different scheme was used: MMNNFFRBB for
- *  major minor fix final patch/beta)
- */
-#define OPENSSL_VERSION_NUMBER	0x0090805fL
-#ifdef OPENSSL_FIPS
-#define OPENSSL_VERSION_TEXT	"OpenSSL 0.9.8e-fips 23 Feb 2007"
-#else
-#define OPENSSL_VERSION_TEXT	"OpenSSL 0.9.8e 23 Feb 2007"
-#endif
-#define OPENSSL_VERSION_PTEXT	" part of " OPENSSL_VERSION_TEXT
-
-
-/* The macros below are to be used for shared library (.so, .dll, ...)
- * versioning.  That kind of versioning works a bit differently between
- * operating systems.  The most usual scheme is to set a major and a minor
- * number, and have the runtime loader check that the major number is equal
- * to what it was at application link time, while the minor number has to
- * be greater or equal to what it was at application link time.  With this
- * scheme, the version number is usually part of the file name, like this:
- *
- *	libcrypto.so.0.9
- *
- * Some unixen also make a softlink with the major verson number only:
- *
- *	libcrypto.so.0
- *
- * On Tru64 and IRIX 6.x it works a little bit differently.  There, the
- * shared library version is stored in the file, and is actually a series
- * of versions, separated by colons.  The rightmost version present in the
- * library when linking an application is stored in the application to be
- * matched at run time.  When the application is run, a check is done to
- * see if the library version stored in the application matches any of the
- * versions in the version string of the library itself.
- * This version string can be constructed in any way, depending on what
- * kind of matching is desired.  However, to implement the same scheme as
- * the one used in the other unixen, all compatible versions, from lowest
- * to highest, should be part of the string.  Consecutive builds would
- * give the following versions strings:
- *
- *	3.0
- *	3.0:3.1
- *	3.0:3.1:3.2
- *	4.0
- *	4.0:4.1
- *
- * Notice how version 4 is completely incompatible with version, and
- * therefore give the breach you can see.
- *
- * There may be other schemes as well that I haven't yet discovered.
- *
- * So, here's the way it works here: first of all, the library version
- * number doesn't need at all to match the overall OpenSSL version.
- * However, it's nice and more understandable if it actually does.
- * The current library version is stored in the macro SHLIB_VERSION_NUMBER,
- * which is just a piece of text in the format "M.m.e" (Major, minor, edit).
- * For the sake of Tru64, IRIX, and any other OS that behaves in similar ways,
- * we need to keep a history of version numbers, which is done in the
- * macro SHLIB_VERSION_HISTORY.  The numbers are separated by colons and
- * should only keep the versions that are binary compatible with the current.
- */
-#define SHLIB_VERSION_HISTORY ""
-#define SHLIB_VERSION_NUMBER "0.9.8"
-
-
-#endif /* HEADER_OPENSSLV_H */
diff --git a/crypto/openssl/crypto/ossl_typ.h b/crypto/openssl/crypto/ossl_typ.h
deleted file mode 100644
index 9c335a181909..000000000000
--- a/crypto/openssl/crypto/ossl_typ.h
+++ /dev/null
@@ -1,174 +0,0 @@
-/* ====================================================================
- * Copyright (c) 1998-2001 The OpenSSL Project.  All rights reserved.
- *
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions
- * are met:
- *
- * 1. Redistributions of source code must retain the above copyright
- *    notice, this list of conditions and the following disclaimer. 
- *
- * 2. Redistributions in binary form must reproduce the above copyright
- *    notice, this list of conditions and the following disclaimer in
- *    the documentation and/or other materials provided with the
- *    distribution.
- *
- * 3. All advertising materials mentioning features or use of this
- *    software must display the following acknowledgment:
- *    "This product includes software developed by the OpenSSL Project
- *    for use in the OpenSSL Toolkit. (http://www.openssl.org/)"
- *
- * 4. The names "OpenSSL Toolkit" and "OpenSSL Project" must not be used to
- *    endorse or promote products derived from this software without
- *    prior written permission. For written permission, please contact
- *    openssl-core@openssl.org.
- *
- * 5. Products derived from this software may not be called "OpenSSL"
- *    nor may "OpenSSL" appear in their names without prior written
- *    permission of the OpenSSL Project.
- *
- * 6. Redistributions of any form whatsoever must retain the following
- *    acknowledgment:
- *    "This product includes software developed by the OpenSSL Project
- *    for use in the OpenSSL Toolkit (http://www.openssl.org/)"
- *
- * THIS SOFTWARE IS PROVIDED BY THE OpenSSL PROJECT ``AS IS'' AND ANY
- * EXPRESSED OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
- * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR
- * PURPOSE ARE DISCLAIMED.  IN NO EVENT SHALL THE OpenSSL PROJECT OR
- * ITS CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
- * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
- * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
- * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
- * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
- * STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
- * ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED
- * OF THE POSSIBILITY OF SUCH DAMAGE.
- * ====================================================================
- *
- * This product includes cryptographic software written by Eric Young
- * (eay@cryptsoft.com).  This product includes software written by Tim
- * Hudson (tjh@cryptsoft.com).
- *
- */
-
-#ifndef HEADER_OPENSSL_TYPES_H
-#define HEADER_OPENSSL_TYPES_H
-
-#include <openssl/e_os2.h>
-
-#ifdef NO_ASN1_TYPEDEFS
-#define ASN1_INTEGER		ASN1_STRING
-#define ASN1_ENUMERATED		ASN1_STRING
-#define ASN1_BIT_STRING		ASN1_STRING
-#define ASN1_OCTET_STRING	ASN1_STRING
-#define ASN1_PRINTABLESTRING	ASN1_STRING
-#define ASN1_T61STRING		ASN1_STRING
-#define ASN1_IA5STRING		ASN1_STRING
-#define ASN1_UTCTIME		ASN1_STRING
-#define ASN1_GENERALIZEDTIME	ASN1_STRING
-#define ASN1_TIME		ASN1_STRING
-#define ASN1_GENERALSTRING	ASN1_STRING
-#define ASN1_UNIVERSALSTRING	ASN1_STRING
-#define ASN1_BMPSTRING		ASN1_STRING
-#define ASN1_VISIBLESTRING	ASN1_STRING
-#define ASN1_UTF8STRING		ASN1_STRING
-#define ASN1_BOOLEAN		int
-#define ASN1_NULL		int
-#else
-typedef struct asn1_string_st ASN1_INTEGER;
-typedef struct asn1_string_st ASN1_ENUMERATED;
-typedef struct asn1_string_st ASN1_BIT_STRING;
-typedef struct asn1_string_st ASN1_OCTET_STRING;
-typedef struct asn1_string_st ASN1_PRINTABLESTRING;
-typedef struct asn1_string_st ASN1_T61STRING;
-typedef struct asn1_string_st ASN1_IA5STRING;
-typedef struct asn1_string_st ASN1_GENERALSTRING;
-typedef struct asn1_string_st ASN1_UNIVERSALSTRING;
-typedef struct asn1_string_st ASN1_BMPSTRING;
-typedef struct asn1_string_st ASN1_UTCTIME;
-typedef struct asn1_string_st ASN1_TIME;
-typedef struct asn1_string_st ASN1_GENERALIZEDTIME;
-typedef struct asn1_string_st ASN1_VISIBLESTRING;
-typedef struct asn1_string_st ASN1_UTF8STRING;
-typedef int ASN1_BOOLEAN;
-typedef int ASN1_NULL;
-#endif
-
-#ifdef OPENSSL_SYS_WIN32
-#undef X509_NAME
-#undef X509_CERT_PAIR
-#undef PKCS7_ISSUER_AND_SERIAL
-#endif
-
-#ifdef BIGNUM
-#undef BIGNUM
-#endif
-typedef struct bignum_st BIGNUM;
-typedef struct bignum_ctx BN_CTX;
-typedef struct bn_blinding_st BN_BLINDING;
-typedef struct bn_mont_ctx_st BN_MONT_CTX;
-typedef struct bn_recp_ctx_st BN_RECP_CTX;
-typedef struct bn_gencb_st BN_GENCB;
-
-typedef struct buf_mem_st BUF_MEM;
-
-typedef struct evp_cipher_st EVP_CIPHER;
-typedef struct evp_cipher_ctx_st EVP_CIPHER_CTX;
-typedef struct env_md_st EVP_MD;
-typedef struct env_md_ctx_st EVP_MD_CTX;
-typedef struct evp_pkey_st EVP_PKEY;
-
-typedef struct dh_st DH;
-typedef struct dh_method DH_METHOD;
-
-typedef struct dsa_st DSA;
-typedef struct dsa_method DSA_METHOD;
-
-typedef struct rsa_st RSA;
-typedef struct rsa_meth_st RSA_METHOD;
-
-typedef struct rand_meth_st RAND_METHOD;
-
-typedef struct ecdh_method ECDH_METHOD;
-typedef struct ecdsa_method ECDSA_METHOD;
-
-typedef struct x509_st X509;
-typedef struct X509_algor_st X509_ALGOR;
-typedef struct X509_crl_st X509_CRL;
-typedef struct X509_name_st X509_NAME;
-typedef struct x509_store_st X509_STORE;
-typedef struct x509_store_ctx_st X509_STORE_CTX;
-
-typedef struct v3_ext_ctx X509V3_CTX;
-typedef struct conf_st CONF;
-
-typedef struct store_st STORE;
-typedef struct store_method_st STORE_METHOD;
-
-typedef struct ui_st UI;
-typedef struct ui_method_st UI_METHOD;
-
-typedef struct st_ERR_FNS ERR_FNS;
-
-typedef struct engine_st ENGINE;
-
-typedef struct X509_POLICY_NODE_st X509_POLICY_NODE;
-typedef struct X509_POLICY_LEVEL_st X509_POLICY_LEVEL;
-typedef struct X509_POLICY_TREE_st X509_POLICY_TREE;
-typedef struct X509_POLICY_CACHE_st X509_POLICY_CACHE;
-
-  /* If placed in pkcs12.h, we end up with a circular depency with pkcs7.h */
-#define DECLARE_PKCS12_STACK_OF(type) /* Nothing */
-#define IMPLEMENT_PKCS12_STACK_OF(type) /* Nothing */
-
-typedef struct crypto_ex_data_st CRYPTO_EX_DATA;
-/* Callback types for crypto.h */
-typedef int CRYPTO_EX_new(void *parent, void *ptr, CRYPTO_EX_DATA *ad,
-					int idx, long argl, void *argp);
-typedef void CRYPTO_EX_free(void *parent, void *ptr, CRYPTO_EX_DATA *ad,
-					int idx, long argl, void *argp);
-typedef int CRYPTO_EX_dup(CRYPTO_EX_DATA *to, CRYPTO_EX_DATA *from, void *from_d, 
-					int idx, long argl, void *argp);
-
-#endif /* def HEADER_OPENSSL_TYPES_H */
diff --git a/crypto/openssl/crypto/pem/Makefile b/crypto/openssl/crypto/pem/Makefile
deleted file mode 100644
index 742194fd24cc..000000000000
--- a/crypto/openssl/crypto/pem/Makefile
+++ /dev/null
@@ -1,241 +0,0 @@
-#
-# OpenSSL/crypto/pem/Makefile
-#
-
-DIR=	pem
-TOP=	../..
-CC=	cc
-INCLUDES= -I.. -I$(TOP) -I../../include
-CFLAG=-g
-MAKEFILE=	Makefile
-AR=		ar r
-
-CFLAGS= $(INCLUDES) $(CFLAG)
-
-GENERAL=Makefile
-TEST=
-APPS=
-
-LIB=$(TOP)/libcrypto.a
-LIBSRC= pem_sign.c pem_seal.c pem_info.c pem_lib.c pem_all.c pem_err.c \
-	pem_x509.c pem_xaux.c pem_oth.c pem_pk8.c pem_pkey.c
-
-LIBOBJ=	pem_sign.o pem_seal.o pem_info.o pem_lib.o pem_all.o pem_err.o \
-	pem_x509.o pem_xaux.o pem_oth.o pem_pk8.o pem_pkey.o
-
-SRC= $(LIBSRC)
-
-EXHEADER= pem.h pem2.h
-HEADER=	$(EXHEADER)
-
-ALL=    $(GENERAL) $(SRC) $(HEADER)
-
-top:
-	(cd ../..; $(MAKE) DIRS=crypto SDIRS=$(DIR) sub_all)
-
-all:	lib
-
-lib:	$(LIBOBJ)
-	$(AR) $(LIB) $(LIBOBJ)
-	$(RANLIB) $(LIB) || echo Never mind.
-	@touch lib
-
-files:
-	$(PERL) $(TOP)/util/files.pl Makefile >> $(TOP)/MINFO
-
-links: $(EXHEADER)
-	@$(PERL) $(TOP)/util/mklink.pl ../../include/openssl $(EXHEADER)
-	@$(PERL) $(TOP)/util/mklink.pl ../../test $(TEST)
-	@$(PERL) $(TOP)/util/mklink.pl ../../apps $(APPS)
-
-install:
-	@[ -n "$(INSTALLTOP)" ] # should be set by top Makefile...
-	@headerlist="$(EXHEADER)"; for i in $$headerlist ; \
-	do  \
-	(cp $$i $(INSTALL_PREFIX)$(INSTALLTOP)/include/openssl/$$i; \
-	chmod 644 $(INSTALL_PREFIX)$(INSTALLTOP)/include/openssl/$$i ); \
-	done;
-
-tags:
-	ctags $(SRC)
-
-tests:
-
-lint:
-	lint -DLINT $(INCLUDES) $(SRC)>fluff
-
-depend:
-	@[ -n "$(MAKEDEPEND)" ] # should be set by upper Makefile...
-	$(MAKEDEPEND) -- $(CFLAG) $(INCLUDES) $(DEPFLAG) -- $(LIBSRC)
-
-dclean:
-	$(PERL) -pe 'if (/^# DO NOT DELETE THIS LINE/) {print; exit(0);}' $(MAKEFILE) >Makefile.new
-	mv -f Makefile.new $(MAKEFILE)
-
-clean:
-	rm -f *.o *.obj lib tags core .pure .nfs* *.old *.bak fluff
-
-# DO NOT DELETE THIS LINE -- make depend depends on it.
-
-pem_all.o: ../../e_os.h ../../include/openssl/asn1.h
-pem_all.o: ../../include/openssl/bio.h ../../include/openssl/buffer.h
-pem_all.o: ../../include/openssl/crypto.h ../../include/openssl/dh.h
-pem_all.o: ../../include/openssl/dsa.h ../../include/openssl/e_os2.h
-pem_all.o: ../../include/openssl/ec.h ../../include/openssl/ecdh.h
-pem_all.o: ../../include/openssl/ecdsa.h ../../include/openssl/err.h
-pem_all.o: ../../include/openssl/evp.h ../../include/openssl/lhash.h
-pem_all.o: ../../include/openssl/obj_mac.h ../../include/openssl/objects.h
-pem_all.o: ../../include/openssl/opensslconf.h ../../include/openssl/opensslv.h
-pem_all.o: ../../include/openssl/ossl_typ.h ../../include/openssl/pem.h
-pem_all.o: ../../include/openssl/pem2.h ../../include/openssl/pkcs7.h
-pem_all.o: ../../include/openssl/rsa.h ../../include/openssl/safestack.h
-pem_all.o: ../../include/openssl/sha.h ../../include/openssl/stack.h
-pem_all.o: ../../include/openssl/symhacks.h ../../include/openssl/x509.h
-pem_all.o: ../../include/openssl/x509_vfy.h ../cryptlib.h pem_all.c
-pem_err.o: ../../include/openssl/asn1.h ../../include/openssl/bio.h
-pem_err.o: ../../include/openssl/buffer.h ../../include/openssl/crypto.h
-pem_err.o: ../../include/openssl/e_os2.h ../../include/openssl/ec.h
-pem_err.o: ../../include/openssl/ecdh.h ../../include/openssl/ecdsa.h
-pem_err.o: ../../include/openssl/err.h ../../include/openssl/evp.h
-pem_err.o: ../../include/openssl/lhash.h ../../include/openssl/obj_mac.h
-pem_err.o: ../../include/openssl/objects.h ../../include/openssl/opensslconf.h
-pem_err.o: ../../include/openssl/opensslv.h ../../include/openssl/ossl_typ.h
-pem_err.o: ../../include/openssl/pem.h ../../include/openssl/pem2.h
-pem_err.o: ../../include/openssl/pkcs7.h ../../include/openssl/safestack.h
-pem_err.o: ../../include/openssl/sha.h ../../include/openssl/stack.h
-pem_err.o: ../../include/openssl/symhacks.h ../../include/openssl/x509.h
-pem_err.o: ../../include/openssl/x509_vfy.h pem_err.c
-pem_info.o: ../../e_os.h ../../include/openssl/asn1.h
-pem_info.o: ../../include/openssl/bio.h ../../include/openssl/buffer.h
-pem_info.o: ../../include/openssl/crypto.h ../../include/openssl/dsa.h
-pem_info.o: ../../include/openssl/e_os2.h ../../include/openssl/ec.h
-pem_info.o: ../../include/openssl/ecdh.h ../../include/openssl/ecdsa.h
-pem_info.o: ../../include/openssl/err.h ../../include/openssl/evp.h
-pem_info.o: ../../include/openssl/lhash.h ../../include/openssl/obj_mac.h
-pem_info.o: ../../include/openssl/objects.h ../../include/openssl/opensslconf.h
-pem_info.o: ../../include/openssl/opensslv.h ../../include/openssl/ossl_typ.h
-pem_info.o: ../../include/openssl/pem.h ../../include/openssl/pem2.h
-pem_info.o: ../../include/openssl/pkcs7.h ../../include/openssl/rsa.h
-pem_info.o: ../../include/openssl/safestack.h ../../include/openssl/sha.h
-pem_info.o: ../../include/openssl/stack.h ../../include/openssl/symhacks.h
-pem_info.o: ../../include/openssl/x509.h ../../include/openssl/x509_vfy.h
-pem_info.o: ../cryptlib.h pem_info.c
-pem_lib.o: ../../e_os.h ../../include/openssl/asn1.h
-pem_lib.o: ../../include/openssl/bio.h ../../include/openssl/buffer.h
-pem_lib.o: ../../include/openssl/crypto.h ../../include/openssl/des.h
-pem_lib.o: ../../include/openssl/des_old.h ../../include/openssl/e_os2.h
-pem_lib.o: ../../include/openssl/ec.h ../../include/openssl/ecdh.h
-pem_lib.o: ../../include/openssl/ecdsa.h ../../include/openssl/err.h
-pem_lib.o: ../../include/openssl/evp.h ../../include/openssl/lhash.h
-pem_lib.o: ../../include/openssl/obj_mac.h ../../include/openssl/objects.h
-pem_lib.o: ../../include/openssl/opensslconf.h ../../include/openssl/opensslv.h
-pem_lib.o: ../../include/openssl/ossl_typ.h ../../include/openssl/pem.h
-pem_lib.o: ../../include/openssl/pem2.h ../../include/openssl/pkcs12.h
-pem_lib.o: ../../include/openssl/pkcs7.h ../../include/openssl/rand.h
-pem_lib.o: ../../include/openssl/safestack.h ../../include/openssl/sha.h
-pem_lib.o: ../../include/openssl/stack.h ../../include/openssl/symhacks.h
-pem_lib.o: ../../include/openssl/ui.h ../../include/openssl/ui_compat.h
-pem_lib.o: ../../include/openssl/x509.h ../../include/openssl/x509_vfy.h
-pem_lib.o: ../cryptlib.h pem_lib.c
-pem_oth.o: ../../e_os.h ../../include/openssl/asn1.h
-pem_oth.o: ../../include/openssl/bio.h ../../include/openssl/buffer.h
-pem_oth.o: ../../include/openssl/crypto.h ../../include/openssl/e_os2.h
-pem_oth.o: ../../include/openssl/ec.h ../../include/openssl/ecdh.h
-pem_oth.o: ../../include/openssl/ecdsa.h ../../include/openssl/err.h
-pem_oth.o: ../../include/openssl/evp.h ../../include/openssl/lhash.h
-pem_oth.o: ../../include/openssl/obj_mac.h ../../include/openssl/objects.h
-pem_oth.o: ../../include/openssl/opensslconf.h ../../include/openssl/opensslv.h
-pem_oth.o: ../../include/openssl/ossl_typ.h ../../include/openssl/pem.h
-pem_oth.o: ../../include/openssl/pem2.h ../../include/openssl/pkcs7.h
-pem_oth.o: ../../include/openssl/rand.h ../../include/openssl/safestack.h
-pem_oth.o: ../../include/openssl/sha.h ../../include/openssl/stack.h
-pem_oth.o: ../../include/openssl/symhacks.h ../../include/openssl/x509.h
-pem_oth.o: ../../include/openssl/x509_vfy.h ../cryptlib.h pem_oth.c
-pem_pk8.o: ../../e_os.h ../../include/openssl/asn1.h
-pem_pk8.o: ../../include/openssl/bio.h ../../include/openssl/buffer.h
-pem_pk8.o: ../../include/openssl/crypto.h ../../include/openssl/e_os2.h
-pem_pk8.o: ../../include/openssl/ec.h ../../include/openssl/ecdh.h
-pem_pk8.o: ../../include/openssl/ecdsa.h ../../include/openssl/err.h
-pem_pk8.o: ../../include/openssl/evp.h ../../include/openssl/lhash.h
-pem_pk8.o: ../../include/openssl/obj_mac.h ../../include/openssl/objects.h
-pem_pk8.o: ../../include/openssl/opensslconf.h ../../include/openssl/opensslv.h
-pem_pk8.o: ../../include/openssl/ossl_typ.h ../../include/openssl/pem.h
-pem_pk8.o: ../../include/openssl/pem2.h ../../include/openssl/pkcs12.h
-pem_pk8.o: ../../include/openssl/pkcs7.h ../../include/openssl/rand.h
-pem_pk8.o: ../../include/openssl/safestack.h ../../include/openssl/sha.h
-pem_pk8.o: ../../include/openssl/stack.h ../../include/openssl/symhacks.h
-pem_pk8.o: ../../include/openssl/x509.h ../../include/openssl/x509_vfy.h
-pem_pk8.o: ../cryptlib.h pem_pk8.c
-pem_pkey.o: ../../e_os.h ../../include/openssl/asn1.h
-pem_pkey.o: ../../include/openssl/bio.h ../../include/openssl/buffer.h
-pem_pkey.o: ../../include/openssl/crypto.h ../../include/openssl/e_os2.h
-pem_pkey.o: ../../include/openssl/ec.h ../../include/openssl/ecdh.h
-pem_pkey.o: ../../include/openssl/ecdsa.h ../../include/openssl/err.h
-pem_pkey.o: ../../include/openssl/evp.h ../../include/openssl/lhash.h
-pem_pkey.o: ../../include/openssl/obj_mac.h ../../include/openssl/objects.h
-pem_pkey.o: ../../include/openssl/opensslconf.h
-pem_pkey.o: ../../include/openssl/opensslv.h ../../include/openssl/ossl_typ.h
-pem_pkey.o: ../../include/openssl/pem.h ../../include/openssl/pem2.h
-pem_pkey.o: ../../include/openssl/pkcs12.h ../../include/openssl/pkcs7.h
-pem_pkey.o: ../../include/openssl/rand.h ../../include/openssl/safestack.h
-pem_pkey.o: ../../include/openssl/sha.h ../../include/openssl/stack.h
-pem_pkey.o: ../../include/openssl/symhacks.h ../../include/openssl/x509.h
-pem_pkey.o: ../../include/openssl/x509_vfy.h ../cryptlib.h pem_pkey.c
-pem_seal.o: ../../e_os.h ../../include/openssl/asn1.h
-pem_seal.o: ../../include/openssl/bio.h ../../include/openssl/buffer.h
-pem_seal.o: ../../include/openssl/crypto.h ../../include/openssl/e_os2.h
-pem_seal.o: ../../include/openssl/ec.h ../../include/openssl/ecdh.h
-pem_seal.o: ../../include/openssl/ecdsa.h ../../include/openssl/err.h
-pem_seal.o: ../../include/openssl/evp.h ../../include/openssl/lhash.h
-pem_seal.o: ../../include/openssl/obj_mac.h ../../include/openssl/objects.h
-pem_seal.o: ../../include/openssl/opensslconf.h
-pem_seal.o: ../../include/openssl/opensslv.h ../../include/openssl/ossl_typ.h
-pem_seal.o: ../../include/openssl/pem.h ../../include/openssl/pem2.h
-pem_seal.o: ../../include/openssl/pkcs7.h ../../include/openssl/rand.h
-pem_seal.o: ../../include/openssl/rsa.h ../../include/openssl/safestack.h
-pem_seal.o: ../../include/openssl/sha.h ../../include/openssl/stack.h
-pem_seal.o: ../../include/openssl/symhacks.h ../../include/openssl/x509.h
-pem_seal.o: ../../include/openssl/x509_vfy.h ../cryptlib.h pem_seal.c
-pem_sign.o: ../../e_os.h ../../include/openssl/asn1.h
-pem_sign.o: ../../include/openssl/bio.h ../../include/openssl/buffer.h
-pem_sign.o: ../../include/openssl/crypto.h ../../include/openssl/e_os2.h
-pem_sign.o: ../../include/openssl/ec.h ../../include/openssl/ecdh.h
-pem_sign.o: ../../include/openssl/ecdsa.h ../../include/openssl/err.h
-pem_sign.o: ../../include/openssl/evp.h ../../include/openssl/lhash.h
-pem_sign.o: ../../include/openssl/obj_mac.h ../../include/openssl/objects.h
-pem_sign.o: ../../include/openssl/opensslconf.h
-pem_sign.o: ../../include/openssl/opensslv.h ../../include/openssl/ossl_typ.h
-pem_sign.o: ../../include/openssl/pem.h ../../include/openssl/pem2.h
-pem_sign.o: ../../include/openssl/pkcs7.h ../../include/openssl/rand.h
-pem_sign.o: ../../include/openssl/safestack.h ../../include/openssl/sha.h
-pem_sign.o: ../../include/openssl/stack.h ../../include/openssl/symhacks.h
-pem_sign.o: ../../include/openssl/x509.h ../../include/openssl/x509_vfy.h
-pem_sign.o: ../cryptlib.h pem_sign.c
-pem_x509.o: ../../e_os.h ../../include/openssl/asn1.h
-pem_x509.o: ../../include/openssl/bio.h ../../include/openssl/buffer.h
-pem_x509.o: ../../include/openssl/crypto.h ../../include/openssl/e_os2.h
-pem_x509.o: ../../include/openssl/ec.h ../../include/openssl/ecdh.h
-pem_x509.o: ../../include/openssl/ecdsa.h ../../include/openssl/err.h
-pem_x509.o: ../../include/openssl/evp.h ../../include/openssl/lhash.h
-pem_x509.o: ../../include/openssl/obj_mac.h ../../include/openssl/objects.h
-pem_x509.o: ../../include/openssl/opensslconf.h
-pem_x509.o: ../../include/openssl/opensslv.h ../../include/openssl/ossl_typ.h
-pem_x509.o: ../../include/openssl/pem.h ../../include/openssl/pem2.h
-pem_x509.o: ../../include/openssl/pkcs7.h ../../include/openssl/safestack.h
-pem_x509.o: ../../include/openssl/sha.h ../../include/openssl/stack.h
-pem_x509.o: ../../include/openssl/symhacks.h ../../include/openssl/x509.h
-pem_x509.o: ../../include/openssl/x509_vfy.h ../cryptlib.h pem_x509.c
-pem_xaux.o: ../../e_os.h ../../include/openssl/asn1.h
-pem_xaux.o: ../../include/openssl/bio.h ../../include/openssl/buffer.h
-pem_xaux.o: ../../include/openssl/crypto.h ../../include/openssl/e_os2.h
-pem_xaux.o: ../../include/openssl/ec.h ../../include/openssl/ecdh.h
-pem_xaux.o: ../../include/openssl/ecdsa.h ../../include/openssl/err.h
-pem_xaux.o: ../../include/openssl/evp.h ../../include/openssl/lhash.h
-pem_xaux.o: ../../include/openssl/obj_mac.h ../../include/openssl/objects.h
-pem_xaux.o: ../../include/openssl/opensslconf.h
-pem_xaux.o: ../../include/openssl/opensslv.h ../../include/openssl/ossl_typ.h
-pem_xaux.o: ../../include/openssl/pem.h ../../include/openssl/pem2.h
-pem_xaux.o: ../../include/openssl/pkcs7.h ../../include/openssl/safestack.h
-pem_xaux.o: ../../include/openssl/sha.h ../../include/openssl/stack.h
-pem_xaux.o: ../../include/openssl/symhacks.h ../../include/openssl/x509.h
-pem_xaux.o: ../../include/openssl/x509_vfy.h ../cryptlib.h pem_xaux.c
diff --git a/crypto/openssl/crypto/pem/message b/crypto/openssl/crypto/pem/message
deleted file mode 100644
index e8bf9d759296..000000000000
--- a/crypto/openssl/crypto/pem/message
+++ /dev/null
@@ -1,16 +0,0 @@
------BEGIN PRIVACY-ENHANCED MESSAGE-----
-Proc-Type: 4,ENCRYPTED
-Proc-Type: 4,MIC-ONLY
-Proc-Type: 4,MIC-CLEAR
-Content-Domain: RFC822
-DEK-Info: DES-CBC,0123456789abcdef
-Originator-Certificate
- xxxx
-Issuer-Certificate
- xxxx
-MIC-Info: RSA-MD5,RSA,
- xxxx
-
-
------END PRIVACY-ENHANCED MESSAGE-----
-
diff --git a/crypto/openssl/crypto/pem/pem.h b/crypto/openssl/crypto/pem/pem.h
deleted file mode 100644
index c28706ddc033..000000000000
--- a/crypto/openssl/crypto/pem/pem.h
+++ /dev/null
@@ -1,737 +0,0 @@
-/* crypto/pem/pem.h */
-/* Copyright (C) 1995-1997 Eric Young (eay@cryptsoft.com)
- * All rights reserved.
- *
- * This package is an SSL implementation written
- * by Eric Young (eay@cryptsoft.com).
- * The implementation was written so as to conform with Netscapes SSL.
- * 
- * This library is free for commercial and non-commercial use as long as
- * the following conditions are aheared to.  The following conditions
- * apply to all code found in this distribution, be it the RC4, RSA,
- * lhash, DES, etc., code; not just the SSL code.  The SSL documentation
- * included with this distribution is covered by the same copyright terms
- * except that the holder is Tim Hudson (tjh@cryptsoft.com).
- * 
- * Copyright remains Eric Young's, and as such any Copyright notices in
- * the code are not to be removed.
- * If this package is used in a product, Eric Young should be given attribution
- * as the author of the parts of the library used.
- * This can be in the form of a textual message at program startup or
- * in documentation (online or textual) provided with the package.
- * 
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions
- * are met:
- * 1. Redistributions of source code must retain the copyright
- *    notice, this list of conditions and the following disclaimer.
- * 2. Redistributions in binary form must reproduce the above copyright
- *    notice, this list of conditions and the following disclaimer in the
- *    documentation and/or other materials provided with the distribution.
- * 3. All advertising materials mentioning features or use of this software
- *    must display the following acknowledgement:
- *    "This product includes cryptographic software written by
- *     Eric Young (eay@cryptsoft.com)"
- *    The word 'cryptographic' can be left out if the rouines from the library
- *    being used are not cryptographic related :-).
- * 4. If you include any Windows specific code (or a derivative thereof) from 
- *    the apps directory (application code) you must include an acknowledgement:
- *    "This product includes software written by Tim Hudson (tjh@cryptsoft.com)"
- * 
- * THIS SOFTWARE IS PROVIDED BY ERIC YOUNG ``AS IS'' AND
- * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
- * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
- * ARE DISCLAIMED.  IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE
- * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
- * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
- * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
- * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
- * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
- * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
- * SUCH DAMAGE.
- * 
- * The licence and distribution terms for any publically available version or
- * derivative of this code cannot be changed.  i.e. this code cannot simply be
- * copied and put under another distribution licence
- * [including the GNU Public Licence.]
- */
-
-#ifndef HEADER_PEM_H
-#define HEADER_PEM_H
-
-#include <openssl/e_os2.h>
-#ifndef OPENSSL_NO_BIO
-#include <openssl/bio.h>
-#endif
-#ifndef OPENSSL_NO_STACK
-#include <openssl/stack.h>
-#endif
-#include <openssl/evp.h>
-#include <openssl/x509.h>
-#include <openssl/pem2.h>
-
-#ifdef  __cplusplus
-extern "C" {
-#endif
-
-#define PEM_BUFSIZE		1024
-
-#define PEM_OBJ_UNDEF		0
-#define PEM_OBJ_X509		1
-#define PEM_OBJ_X509_REQ	2
-#define PEM_OBJ_CRL		3
-#define PEM_OBJ_SSL_SESSION	4
-#define PEM_OBJ_PRIV_KEY	10
-#define PEM_OBJ_PRIV_RSA	11
-#define PEM_OBJ_PRIV_DSA	12
-#define PEM_OBJ_PRIV_DH		13
-#define PEM_OBJ_PUB_RSA		14
-#define PEM_OBJ_PUB_DSA		15
-#define PEM_OBJ_PUB_DH		16
-#define PEM_OBJ_DHPARAMS	17
-#define PEM_OBJ_DSAPARAMS	18
-#define PEM_OBJ_PRIV_RSA_PUBLIC	19
-#define PEM_OBJ_PRIV_ECDSA	20
-#define PEM_OBJ_PUB_ECDSA	21
-#define PEM_OBJ_ECPARAMETERS	22
-
-#define PEM_ERROR		30
-#define PEM_DEK_DES_CBC         40
-#define PEM_DEK_IDEA_CBC        45
-#define PEM_DEK_DES_EDE         50
-#define PEM_DEK_DES_ECB         60
-#define PEM_DEK_RSA             70
-#define PEM_DEK_RSA_MD2         80
-#define PEM_DEK_RSA_MD5         90
-
-#define PEM_MD_MD2		NID_md2
-#define PEM_MD_MD5		NID_md5
-#define PEM_MD_SHA		NID_sha
-#define PEM_MD_MD2_RSA		NID_md2WithRSAEncryption
-#define PEM_MD_MD5_RSA		NID_md5WithRSAEncryption
-#define PEM_MD_SHA_RSA		NID_sha1WithRSAEncryption
-
-#define PEM_STRING_X509_OLD	"X509 CERTIFICATE"
-#define PEM_STRING_X509		"CERTIFICATE"
-#define PEM_STRING_X509_PAIR	"CERTIFICATE PAIR"
-#define PEM_STRING_X509_TRUSTED	"TRUSTED CERTIFICATE"
-#define PEM_STRING_X509_REQ_OLD	"NEW CERTIFICATE REQUEST"
-#define PEM_STRING_X509_REQ	"CERTIFICATE REQUEST"
-#define PEM_STRING_X509_CRL	"X509 CRL"
-#define PEM_STRING_EVP_PKEY	"ANY PRIVATE KEY"
-#define PEM_STRING_PUBLIC	"PUBLIC KEY"
-#define PEM_STRING_RSA		"RSA PRIVATE KEY"
-#define PEM_STRING_RSA_PUBLIC	"RSA PUBLIC KEY"
-#define PEM_STRING_DSA		"DSA PRIVATE KEY"
-#define PEM_STRING_DSA_PUBLIC	"DSA PUBLIC KEY"
-#define PEM_STRING_PKCS7	"PKCS7"
-#define PEM_STRING_PKCS8	"ENCRYPTED PRIVATE KEY"
-#define PEM_STRING_PKCS8INF	"PRIVATE KEY"
-#define PEM_STRING_DHPARAMS	"DH PARAMETERS"
-#define PEM_STRING_SSL_SESSION	"SSL SESSION PARAMETERS"
-#define PEM_STRING_DSAPARAMS	"DSA PARAMETERS"
-#define PEM_STRING_ECDSA_PUBLIC "ECDSA PUBLIC KEY"
-#define PEM_STRING_ECPARAMETERS "EC PARAMETERS"
-#define PEM_STRING_ECPRIVATEKEY	"EC PRIVATE KEY"
-
-  /* Note that this structure is initialised by PEM_SealInit and cleaned up
-     by PEM_SealFinal (at least for now) */
-typedef struct PEM_Encode_Seal_st
-	{
-	EVP_ENCODE_CTX encode;
-	EVP_MD_CTX md;
-	EVP_CIPHER_CTX cipher;
-	} PEM_ENCODE_SEAL_CTX;
-
-/* enc_type is one off */
-#define PEM_TYPE_ENCRYPTED      10
-#define PEM_TYPE_MIC_ONLY       20
-#define PEM_TYPE_MIC_CLEAR      30
-#define PEM_TYPE_CLEAR		40
-
-typedef struct pem_recip_st
-	{
-	char *name;
-	X509_NAME *dn;
-
-	int cipher;
-	int key_enc;
-	/*	char iv[8]; unused and wrong size */
-	} PEM_USER;
-
-typedef struct pem_ctx_st
-	{
-	int type;		/* what type of object */
-
-	struct	{
-		int version;	
-		int mode;		
-		} proc_type;
-
-	char *domain;
-
-	struct	{
-		int cipher;
-	/* unused, and wrong size
-	   unsigned char iv[8]; */
-		} DEK_info;
-		
-	PEM_USER *originator;
-
-	int num_recipient;
-	PEM_USER **recipient;
-
-#ifndef OPENSSL_NO_STACK
-	STACK *x509_chain;	/* certificate chain */
-#else
-	char *x509_chain;	/* certificate chain */
-#endif
-	EVP_MD *md;		/* signature type */
-
-	int md_enc;		/* is the md encrypted or not? */
-	int md_len;		/* length of md_data */
-	char *md_data;		/* message digest, could be pkey encrypted */
-
-	EVP_CIPHER *dec;	/* date encryption cipher */
-	int key_len;		/* key length */
-	unsigned char *key;	/* key */
-	/* unused, and wrong size
-	   unsigned char iv[8]; */
-
-	
-	int  data_enc;		/* is the data encrypted */
-	int data_len;
-	unsigned char *data;
-	} PEM_CTX;
-
-/* These macros make the PEM_read/PEM_write functions easier to maintain and
- * write. Now they are all implemented with either:
- * IMPLEMENT_PEM_rw(...) or IMPLEMENT_PEM_rw_cb(...)
- */
-
-#ifdef OPENSSL_NO_FP_API
-
-#define IMPLEMENT_PEM_read_fp(name, type, str, asn1) /**/
-#define IMPLEMENT_PEM_write_fp(name, type, str, asn1) /**/
-#define IMPLEMENT_PEM_write_cb_fp(name, type, str, asn1) /**/
-
-#else
-
-#define IMPLEMENT_PEM_read_fp(name, type, str, asn1) \
-type *PEM_read_##name(FILE *fp, type **x, pem_password_cb *cb, void *u)\
-{ \
-return(((type *(*)(D2I_OF(type),char *,FILE *,type **,pem_password_cb *,void *))openssl_fcast(PEM_ASN1_read))(d2i_##asn1, str,fp,x,cb,u)); \
-} 
-
-#define IMPLEMENT_PEM_write_fp(name, type, str, asn1) \
-int PEM_write_##name(FILE *fp, type *x) \
-{ \
-return(((int (*)(I2D_OF(type),const char *,FILE *,type *, const EVP_CIPHER *,unsigned char *,int, pem_password_cb *,void *))openssl_fcast(PEM_ASN1_write))(i2d_##asn1,str,fp,x,NULL,NULL,0,NULL,NULL)); \
-}
-
-#define IMPLEMENT_PEM_write_fp_const(name, type, str, asn1) \
-int PEM_write_##name(FILE *fp, const type *x) \
-{ \
-return(((int (*)(I2D_OF_const(type),const char *,FILE *, const type *, const EVP_CIPHER *,unsigned char *,int, pem_password_cb *,void *))openssl_fcast(PEM_ASN1_write))(i2d_##asn1,str,fp,x,NULL,NULL,0,NULL,NULL)); \
-}
-
-#define IMPLEMENT_PEM_write_cb_fp(name, type, str, asn1) \
-int PEM_write_##name(FILE *fp, type *x, const EVP_CIPHER *enc, \
-	     unsigned char *kstr, int klen, pem_password_cb *cb, \
-		  void *u) \
-	{ \
-	return(((int (*)(I2D_OF(type),const char *,FILE *,type *, const EVP_CIPHER *,unsigned char *,int, pem_password_cb *,void *))openssl_fcast(PEM_ASN1_write))(i2d_##asn1,str,fp,x,enc,kstr,klen,cb,u)); \
-	}
-
-#define IMPLEMENT_PEM_write_cb_fp_const(name, type, str, asn1) \
-int PEM_write_##name(FILE *fp, type *x, const EVP_CIPHER *enc, \
-	     unsigned char *kstr, int klen, pem_password_cb *cb, \
-		  void *u) \
-	{ \
-	return(((int (*)(I2D_OF_const(type),const char *,FILE *,type *, const EVP_CIPHER *,unsigned char *,int, pem_password_cb *,void *))openssl_fcast(PEM_ASN1_write))(i2d_##asn1,str,fp,x,enc,kstr,klen,cb,u)); \
-	}
-
-#endif
-
-#define IMPLEMENT_PEM_read_bio(name, type, str, asn1) \
-type *PEM_read_bio_##name(BIO *bp, type **x, pem_password_cb *cb, void *u)\
-{ \
-return(((type *(*)(D2I_OF(type),const char *,BIO *,type **,pem_password_cb *,void *))openssl_fcast(PEM_ASN1_read_bio))(d2i_##asn1, str,bp,x,cb,u)); \
-}
-
-#define IMPLEMENT_PEM_write_bio(name, type, str, asn1) \
-int PEM_write_bio_##name(BIO *bp, type *x) \
-{ \
-return(((int (*)(I2D_OF(type),const char *,BIO *,type *, const EVP_CIPHER *,unsigned char *,int, pem_password_cb *,void *))openssl_fcast(PEM_ASN1_write_bio))(i2d_##asn1,str,bp,x,NULL,NULL,0,NULL,NULL)); \
-}
-
-#define IMPLEMENT_PEM_write_bio_const(name, type, str, asn1) \
-int PEM_write_bio_##name(BIO *bp, const type *x) \
-{ \
-return(((int (*)(I2D_OF_const(type),const char *,BIO *,const type *, const EVP_CIPHER *,unsigned char *,int, pem_password_cb *,void *))openssl_fcast(PEM_ASN1_write_bio))(i2d_##asn1,str,bp,x,NULL,NULL,0,NULL,NULL)); \
-}
-
-#define IMPLEMENT_PEM_write_cb_bio(name, type, str, asn1) \
-int PEM_write_bio_##name(BIO *bp, type *x, const EVP_CIPHER *enc, \
-	     unsigned char *kstr, int klen, pem_password_cb *cb, void *u) \
-	{ \
-	return(((int (*)(I2D_OF(type),const char *,BIO *,type *,const EVP_CIPHER *,unsigned char *,int,pem_password_cb *,void *))openssl_fcast(PEM_ASN1_write_bio))(i2d_##asn1,str,bp,x,enc,kstr,klen,cb,u)); \
-	}
-
-#define IMPLEMENT_PEM_write_cb_bio_const(name, type, str, asn1) \
-int PEM_write_bio_##name(BIO *bp, type *x, const EVP_CIPHER *enc, \
-	     unsigned char *kstr, int klen, pem_password_cb *cb, void *u) \
-	{ \
-	return(((int (*)(I2D_OF_const(type),const char *,BIO *,type *,const EVP_CIPHER *,unsigned char *,int,pem_password_cb *,void *))openssl_fcast(PEM_ASN1_write_bio))(i2d_##asn1,str,bp,x,enc,kstr,klen,cb,u)); \
-	}
-
-#define IMPLEMENT_PEM_write(name, type, str, asn1) \
-	IMPLEMENT_PEM_write_bio(name, type, str, asn1) \
-	IMPLEMENT_PEM_write_fp(name, type, str, asn1) 
-
-#define IMPLEMENT_PEM_write_const(name, type, str, asn1) \
-	IMPLEMENT_PEM_write_bio_const(name, type, str, asn1) \
-	IMPLEMENT_PEM_write_fp_const(name, type, str, asn1) 
-
-#define IMPLEMENT_PEM_write_cb(name, type, str, asn1) \
-	IMPLEMENT_PEM_write_cb_bio(name, type, str, asn1) \
-	IMPLEMENT_PEM_write_cb_fp(name, type, str, asn1) 
-
-#define IMPLEMENT_PEM_write_cb_const(name, type, str, asn1) \
-	IMPLEMENT_PEM_write_cb_bio_const(name, type, str, asn1) \
-	IMPLEMENT_PEM_write_cb_fp_const(name, type, str, asn1) 
-
-#define IMPLEMENT_PEM_read(name, type, str, asn1) \
-	IMPLEMENT_PEM_read_bio(name, type, str, asn1) \
-	IMPLEMENT_PEM_read_fp(name, type, str, asn1) 
-
-#define IMPLEMENT_PEM_rw(name, type, str, asn1) \
-	IMPLEMENT_PEM_read(name, type, str, asn1) \
-	IMPLEMENT_PEM_write(name, type, str, asn1)
-
-#define IMPLEMENT_PEM_rw_const(name, type, str, asn1) \
-	IMPLEMENT_PEM_read(name, type, str, asn1) \
-	IMPLEMENT_PEM_write_const(name, type, str, asn1)
-
-#define IMPLEMENT_PEM_rw_cb(name, type, str, asn1) \
-	IMPLEMENT_PEM_read(name, type, str, asn1) \
-	IMPLEMENT_PEM_write_cb(name, type, str, asn1)
-
-/* These are the same except they are for the declarations */
-
-#if defined(OPENSSL_SYS_WIN16) || defined(OPENSSL_NO_FP_API)
-
-#define DECLARE_PEM_read_fp(name, type) /**/
-#define DECLARE_PEM_write_fp(name, type) /**/
-#define DECLARE_PEM_write_cb_fp(name, type) /**/
-
-#else
-
-#define DECLARE_PEM_read_fp(name, type) \
-	type *PEM_read_##name(FILE *fp, type **x, pem_password_cb *cb, void *u);
-
-#define DECLARE_PEM_write_fp(name, type) \
-	int PEM_write_##name(FILE *fp, type *x);
-
-#define DECLARE_PEM_write_fp_const(name, type) \
-	int PEM_write_##name(FILE *fp, const type *x);
-
-#define DECLARE_PEM_write_cb_fp(name, type) \
-	int PEM_write_##name(FILE *fp, type *x, const EVP_CIPHER *enc, \
-	     unsigned char *kstr, int klen, pem_password_cb *cb, void *u);
-
-#endif
-
-#ifndef OPENSSL_NO_BIO
-#define DECLARE_PEM_read_bio(name, type) \
-	type *PEM_read_bio_##name(BIO *bp, type **x, pem_password_cb *cb, void *u);
-
-#define DECLARE_PEM_write_bio(name, type) \
-	int PEM_write_bio_##name(BIO *bp, type *x);
-
-#define DECLARE_PEM_write_bio_const(name, type) \
-	int PEM_write_bio_##name(BIO *bp, const type *x);
-
-#define DECLARE_PEM_write_cb_bio(name, type) \
-	int PEM_write_bio_##name(BIO *bp, type *x, const EVP_CIPHER *enc, \
-	     unsigned char *kstr, int klen, pem_password_cb *cb, void *u);
-
-#else
-
-#define DECLARE_PEM_read_bio(name, type) /**/
-#define DECLARE_PEM_write_bio(name, type) /**/
-#define DECLARE_PEM_write_cb_bio(name, type) /**/
-
-#endif
-
-#define DECLARE_PEM_write(name, type) \
-	DECLARE_PEM_write_bio(name, type) \
-	DECLARE_PEM_write_fp(name, type) 
-
-#define DECLARE_PEM_write_const(name, type) \
-	DECLARE_PEM_write_bio_const(name, type) \
-	DECLARE_PEM_write_fp_const(name, type)
-
-#define DECLARE_PEM_write_cb(name, type) \
-	DECLARE_PEM_write_cb_bio(name, type) \
-	DECLARE_PEM_write_cb_fp(name, type) 
-
-#define DECLARE_PEM_read(name, type) \
-	DECLARE_PEM_read_bio(name, type) \
-	DECLARE_PEM_read_fp(name, type)
-
-#define DECLARE_PEM_rw(name, type) \
-	DECLARE_PEM_read(name, type) \
-	DECLARE_PEM_write(name, type)
-
-#define DECLARE_PEM_rw_const(name, type) \
-	DECLARE_PEM_read(name, type) \
-	DECLARE_PEM_write_const(name, type)
-
-#define DECLARE_PEM_rw_cb(name, type) \
-	DECLARE_PEM_read(name, type) \
-	DECLARE_PEM_write_cb(name, type)
-
-#ifdef SSLEAY_MACROS
-
-#define PEM_write_SSL_SESSION(fp,x) \
-		PEM_ASN1_write((int (*)())i2d_SSL_SESSION, \
-			PEM_STRING_SSL_SESSION,fp, (char *)x, NULL,NULL,0,NULL,NULL)
-#define PEM_write_X509(fp,x) \
-		PEM_ASN1_write((int (*)())i2d_X509,PEM_STRING_X509,fp, \
-			(char *)x, NULL,NULL,0,NULL,NULL)
-#define PEM_write_X509_REQ(fp,x) PEM_ASN1_write( \
-		(int (*)())i2d_X509_REQ,PEM_STRING_X509_REQ,fp,(char *)x, \
-			NULL,NULL,0,NULL,NULL)
-#define PEM_write_X509_CRL(fp,x) \
-		PEM_ASN1_write((int (*)())i2d_X509_CRL,PEM_STRING_X509_CRL, \
-			fp,(char *)x, NULL,NULL,0,NULL,NULL)
-#define	PEM_write_RSAPrivateKey(fp,x,enc,kstr,klen,cb,u) \
-		PEM_ASN1_write((int (*)())i2d_RSAPrivateKey,PEM_STRING_RSA,fp,\
-			(char *)x,enc,kstr,klen,cb,u)
-#define	PEM_write_RSAPublicKey(fp,x) \
-		PEM_ASN1_write((int (*)())i2d_RSAPublicKey,\
-			PEM_STRING_RSA_PUBLIC,fp,(char *)x,NULL,NULL,0,NULL,NULL)
-#define	PEM_write_DSAPrivateKey(fp,x,enc,kstr,klen,cb,u) \
-		PEM_ASN1_write((int (*)())i2d_DSAPrivateKey,PEM_STRING_DSA,fp,\
-			(char *)x,enc,kstr,klen,cb,u)
-#define	PEM_write_PrivateKey(bp,x,enc,kstr,klen,cb,u) \
-		PEM_ASN1_write((int (*)())i2d_PrivateKey,\
-		(((x)->type == EVP_PKEY_DSA)?PEM_STRING_DSA:PEM_STRING_RSA),\
-			bp,(char *)x,enc,kstr,klen,cb,u)
-#define PEM_write_PKCS7(fp,x) \
-		PEM_ASN1_write((int (*)())i2d_PKCS7,PEM_STRING_PKCS7,fp, \
-			(char *)x, NULL,NULL,0,NULL,NULL)
-#define PEM_write_DHparams(fp,x) \
-		PEM_ASN1_write((int (*)())i2d_DHparams,PEM_STRING_DHPARAMS,fp,\
-			(char *)x,NULL,NULL,0,NULL,NULL)
-
-#define PEM_write_NETSCAPE_CERT_SEQUENCE(fp,x) \
-                PEM_ASN1_write((int (*)())i2d_NETSCAPE_CERT_SEQUENCE, \
-			PEM_STRING_X509,fp, \
-                        (char *)x, NULL,NULL,0,NULL,NULL)
-
-#define	PEM_read_SSL_SESSION(fp,x,cb,u) (SSL_SESSION *)PEM_ASN1_read( \
-	(char *(*)())d2i_SSL_SESSION,PEM_STRING_SSL_SESSION,fp,(char **)x,cb,u)
-#define	PEM_read_X509(fp,x,cb,u) (X509 *)PEM_ASN1_read( \
-	(char *(*)())d2i_X509,PEM_STRING_X509,fp,(char **)x,cb,u)
-#define	PEM_read_X509_REQ(fp,x,cb,u) (X509_REQ *)PEM_ASN1_read( \
-	(char *(*)())d2i_X509_REQ,PEM_STRING_X509_REQ,fp,(char **)x,cb,u)
-#define	PEM_read_X509_CRL(fp,x,cb,u) (X509_CRL *)PEM_ASN1_read( \
-	(char *(*)())d2i_X509_CRL,PEM_STRING_X509_CRL,fp,(char **)x,cb,u)
-#define	PEM_read_RSAPrivateKey(fp,x,cb,u) (RSA *)PEM_ASN1_read( \
-	(char *(*)())d2i_RSAPrivateKey,PEM_STRING_RSA,fp,(char **)x,cb,u)
-#define	PEM_read_RSAPublicKey(fp,x,cb,u) (RSA *)PEM_ASN1_read( \
-	(char *(*)())d2i_RSAPublicKey,PEM_STRING_RSA_PUBLIC,fp,(char **)x,cb,u)
-#define	PEM_read_DSAPrivateKey(fp,x,cb,u) (DSA *)PEM_ASN1_read( \
-	(char *(*)())d2i_DSAPrivateKey,PEM_STRING_DSA,fp,(char **)x,cb,u)
-#define	PEM_read_PrivateKey(fp,x,cb,u) (EVP_PKEY *)PEM_ASN1_read( \
-	(char *(*)())d2i_PrivateKey,PEM_STRING_EVP_PKEY,fp,(char **)x,cb,u)
-#define	PEM_read_PKCS7(fp,x,cb,u) (PKCS7 *)PEM_ASN1_read( \
-	(char *(*)())d2i_PKCS7,PEM_STRING_PKCS7,fp,(char **)x,cb,u)
-#define	PEM_read_DHparams(fp,x,cb,u) (DH *)PEM_ASN1_read( \
-	(char *(*)())d2i_DHparams,PEM_STRING_DHPARAMS,fp,(char **)x,cb,u)
-
-#define PEM_read_NETSCAPE_CERT_SEQUENCE(fp,x,cb,u) \
-		(NETSCAPE_CERT_SEQUENCE *)PEM_ASN1_read( \
-        (char *(*)())d2i_NETSCAPE_CERT_SEQUENCE,PEM_STRING_X509,fp,\
-							(char **)x,cb,u)
-
-#define PEM_write_bio_X509(bp,x) \
-		PEM_ASN1_write_bio((int (*)())i2d_X509,PEM_STRING_X509,bp, \
-			(char *)x, NULL,NULL,0,NULL,NULL)
-#define PEM_write_bio_X509_REQ(bp,x) PEM_ASN1_write_bio( \
-		(int (*)())i2d_X509_REQ,PEM_STRING_X509_REQ,bp,(char *)x, \
-			NULL,NULL,0,NULL,NULL)
-#define PEM_write_bio_X509_CRL(bp,x) \
-		PEM_ASN1_write_bio((int (*)())i2d_X509_CRL,PEM_STRING_X509_CRL,\
-			bp,(char *)x, NULL,NULL,0,NULL,NULL)
-#define	PEM_write_bio_RSAPrivateKey(bp,x,enc,kstr,klen,cb,u) \
-		PEM_ASN1_write_bio((int (*)())i2d_RSAPrivateKey,PEM_STRING_RSA,\
-			bp,(char *)x,enc,kstr,klen,cb,u)
-#define	PEM_write_bio_RSAPublicKey(bp,x) \
-		PEM_ASN1_write_bio((int (*)())i2d_RSAPublicKey, \
-			PEM_STRING_RSA_PUBLIC,\
-			bp,(char *)x,NULL,NULL,0,NULL,NULL)
-#define	PEM_write_bio_DSAPrivateKey(bp,x,enc,kstr,klen,cb,u) \
-		PEM_ASN1_write_bio((int (*)())i2d_DSAPrivateKey,PEM_STRING_DSA,\
-			bp,(char *)x,enc,kstr,klen,cb,u)
-#define	PEM_write_bio_PrivateKey(bp,x,enc,kstr,klen,cb,u) \
-		PEM_ASN1_write_bio((int (*)())i2d_PrivateKey,\
-		(((x)->type == EVP_PKEY_DSA)?PEM_STRING_DSA:PEM_STRING_RSA),\
-			bp,(char *)x,enc,kstr,klen,cb,u)
-#define PEM_write_bio_PKCS7(bp,x) \
-		PEM_ASN1_write_bio((int (*)())i2d_PKCS7,PEM_STRING_PKCS7,bp, \
-			(char *)x, NULL,NULL,0,NULL,NULL)
-#define PEM_write_bio_DHparams(bp,x) \
-		PEM_ASN1_write_bio((int (*)())i2d_DHparams,PEM_STRING_DHPARAMS,\
-			bp,(char *)x,NULL,NULL,0,NULL,NULL)
-#define PEM_write_bio_DSAparams(bp,x) \
-		PEM_ASN1_write_bio((int (*)())i2d_DSAparams, \
-			PEM_STRING_DSAPARAMS,bp,(char *)x,NULL,NULL,0,NULL,NULL)
-
-#define PEM_write_bio_NETSCAPE_CERT_SEQUENCE(bp,x) \
-                PEM_ASN1_write_bio((int (*)())i2d_NETSCAPE_CERT_SEQUENCE, \
-			PEM_STRING_X509,bp, \
-                        (char *)x, NULL,NULL,0,NULL,NULL)
-
-#define	PEM_read_bio_X509(bp,x,cb,u) (X509 *)PEM_ASN1_read_bio( \
-	(char *(*)())d2i_X509,PEM_STRING_X509,bp,(char **)x,cb,u)
-#define	PEM_read_bio_X509_REQ(bp,x,cb,u) (X509_REQ *)PEM_ASN1_read_bio( \
-	(char *(*)())d2i_X509_REQ,PEM_STRING_X509_REQ,bp,(char **)x,cb,u)
-#define	PEM_read_bio_X509_CRL(bp,x,cb,u) (X509_CRL *)PEM_ASN1_read_bio( \
-	(char *(*)())d2i_X509_CRL,PEM_STRING_X509_CRL,bp,(char **)x,cb,u)
-#define	PEM_read_bio_RSAPrivateKey(bp,x,cb,u) (RSA *)PEM_ASN1_read_bio( \
-	(char *(*)())d2i_RSAPrivateKey,PEM_STRING_RSA,bp,(char **)x,cb,u)
-#define	PEM_read_bio_RSAPublicKey(bp,x,cb,u) (RSA *)PEM_ASN1_read_bio( \
-	(char *(*)())d2i_RSAPublicKey,PEM_STRING_RSA_PUBLIC,bp,(char **)x,cb,u)
-#define	PEM_read_bio_DSAPrivateKey(bp,x,cb,u) (DSA *)PEM_ASN1_read_bio( \
-	(char *(*)())d2i_DSAPrivateKey,PEM_STRING_DSA,bp,(char **)x,cb,u)
-#define	PEM_read_bio_PrivateKey(bp,x,cb,u) (EVP_PKEY *)PEM_ASN1_read_bio( \
-	(char *(*)())d2i_PrivateKey,PEM_STRING_EVP_PKEY,bp,(char **)x,cb,u)
-
-#define	PEM_read_bio_PKCS7(bp,x,cb,u) (PKCS7 *)PEM_ASN1_read_bio( \
-	(char *(*)())d2i_PKCS7,PEM_STRING_PKCS7,bp,(char **)x,cb,u)
-#define	PEM_read_bio_DHparams(bp,x,cb,u) (DH *)PEM_ASN1_read_bio( \
-	(char *(*)())d2i_DHparams,PEM_STRING_DHPARAMS,bp,(char **)x,cb,u)
-#define	PEM_read_bio_DSAparams(bp,x,cb,u) (DSA *)PEM_ASN1_read_bio( \
-	(char *(*)())d2i_DSAparams,PEM_STRING_DSAPARAMS,bp,(char **)x,cb,u)
-
-#define PEM_read_bio_NETSCAPE_CERT_SEQUENCE(bp,x,cb,u) \
-		(NETSCAPE_CERT_SEQUENCE *)PEM_ASN1_read_bio( \
-        (char *(*)())d2i_NETSCAPE_CERT_SEQUENCE,PEM_STRING_X509,bp,\
-							(char **)x,cb,u)
-
-#endif
-
-#if 1
-/* "userdata": new with OpenSSL 0.9.4 */
-typedef int pem_password_cb(char *buf, int size, int rwflag, void *userdata);
-#else
-/* OpenSSL 0.9.3, 0.9.3a */
-typedef int pem_password_cb(char *buf, int size, int rwflag);
-#endif
-
-int	PEM_get_EVP_CIPHER_INFO(char *header, EVP_CIPHER_INFO *cipher);
-int	PEM_do_header (EVP_CIPHER_INFO *cipher, unsigned char *data,long *len,
-	pem_password_cb *callback,void *u);
-
-#ifndef OPENSSL_NO_BIO
-int	PEM_read_bio(BIO *bp, char **name, char **header,
-		unsigned char **data,long *len);
-int	PEM_write_bio(BIO *bp,const char *name,char *hdr,unsigned char *data,
-		long len);
-int PEM_bytes_read_bio(unsigned char **pdata, long *plen, char **pnm, const char *name, BIO *bp,
-	     pem_password_cb *cb, void *u);
-void *	PEM_ASN1_read_bio(d2i_of_void *d2i, const char *name, BIO *bp,
-			  void **x, pem_password_cb *cb, void *u);
-#define PEM_ASN1_read_bio_of(type,d2i,name,bp,x,cb,u) \
-((type *(*)(D2I_OF(type),const char *,BIO *,type **,pem_password_cb *,void *))openssl_fcast(PEM_ASN1_read_bio))(d2i,name,bp,x,cb,u)
-int	PEM_ASN1_write_bio(i2d_of_void *i2d,const char *name,BIO *bp,char *x,
-			   const EVP_CIPHER *enc,unsigned char *kstr,int klen,
-			   pem_password_cb *cb, void *u);
-#define PEM_ASN1_write_bio_of(type,i2d,name,bp,x,enc,kstr,klen,cb,u) \
-	((int (*)(I2D_OF(type),const char *,BIO *,type *, const EVP_CIPHER *,unsigned char *,int, pem_password_cb *,void *))openssl_fcast(PEM_ASN1_write_bio))(i2d,name,bp,x,enc,kstr,klen,cb,u)
-
-STACK_OF(X509_INFO) *	PEM_X509_INFO_read_bio(BIO *bp, STACK_OF(X509_INFO) *sk, pem_password_cb *cb, void *u);
-int	PEM_X509_INFO_write_bio(BIO *bp,X509_INFO *xi, EVP_CIPHER *enc,
-		unsigned char *kstr, int klen, pem_password_cb *cd, void *u);
-#endif
-
-#ifndef OPENSSL_SYS_WIN16
-int	PEM_read(FILE *fp, char **name, char **header,
-		unsigned char **data,long *len);
-int	PEM_write(FILE *fp,char *name,char *hdr,unsigned char *data,long len);
-void *  PEM_ASN1_read(d2i_of_void *d2i, const char *name, FILE *fp, void **x,
-		      pem_password_cb *cb, void *u);
-int	PEM_ASN1_write(i2d_of_void *i2d,const char *name,FILE *fp,
-		       char *x,const EVP_CIPHER *enc,unsigned char *kstr,
-		       int klen,pem_password_cb *callback, void *u);
-STACK_OF(X509_INFO) *	PEM_X509_INFO_read(FILE *fp, STACK_OF(X509_INFO) *sk,
-	pem_password_cb *cb, void *u);
-#endif
-
-int	PEM_SealInit(PEM_ENCODE_SEAL_CTX *ctx, EVP_CIPHER *type,
-		EVP_MD *md_type, unsigned char **ek, int *ekl,
-		unsigned char *iv, EVP_PKEY **pubk, int npubk);
-void	PEM_SealUpdate(PEM_ENCODE_SEAL_CTX *ctx, unsigned char *out, int *outl,
-		unsigned char *in, int inl);
-int	PEM_SealFinal(PEM_ENCODE_SEAL_CTX *ctx, unsigned char *sig,int *sigl,
-		unsigned char *out, int *outl, EVP_PKEY *priv);
-
-void    PEM_SignInit(EVP_MD_CTX *ctx, EVP_MD *type);
-void    PEM_SignUpdate(EVP_MD_CTX *ctx,unsigned char *d,unsigned int cnt);
-int	PEM_SignFinal(EVP_MD_CTX *ctx, unsigned char *sigret,
-		unsigned int *siglen, EVP_PKEY *pkey);
-
-int	PEM_def_callback(char *buf, int num, int w, void *key);
-void	PEM_proc_type(char *buf, int type);
-void	PEM_dek_info(char *buf, const char *type, int len, char *str);
-
-#ifndef SSLEAY_MACROS
-
-#include <openssl/symhacks.h>
-
-DECLARE_PEM_rw(X509, X509)
-
-DECLARE_PEM_rw(X509_AUX, X509)
-
-DECLARE_PEM_rw(X509_CERT_PAIR, X509_CERT_PAIR)
-
-DECLARE_PEM_rw(X509_REQ, X509_REQ)
-DECLARE_PEM_write(X509_REQ_NEW, X509_REQ)
-
-DECLARE_PEM_rw(X509_CRL, X509_CRL)
-
-DECLARE_PEM_rw(PKCS7, PKCS7)
-
-DECLARE_PEM_rw(NETSCAPE_CERT_SEQUENCE, NETSCAPE_CERT_SEQUENCE)
-
-DECLARE_PEM_rw(PKCS8, X509_SIG)
-
-DECLARE_PEM_rw(PKCS8_PRIV_KEY_INFO, PKCS8_PRIV_KEY_INFO)
-
-#ifndef OPENSSL_NO_RSA
-
-DECLARE_PEM_rw_cb(RSAPrivateKey, RSA)
-
-DECLARE_PEM_rw_const(RSAPublicKey, RSA)
-DECLARE_PEM_rw(RSA_PUBKEY, RSA)
-
-#endif
-
-#ifndef OPENSSL_NO_DSA
-
-DECLARE_PEM_rw_cb(DSAPrivateKey, DSA)
-
-DECLARE_PEM_rw(DSA_PUBKEY, DSA)
-
-DECLARE_PEM_rw_const(DSAparams, DSA)
-
-#endif
-
-#ifndef OPENSSL_NO_EC
-DECLARE_PEM_rw_const(ECPKParameters, EC_GROUP)
-DECLARE_PEM_rw_cb(ECPrivateKey, EC_KEY)
-DECLARE_PEM_rw(EC_PUBKEY, EC_KEY)
-#endif
-
-#ifndef OPENSSL_NO_DH
-
-DECLARE_PEM_rw_const(DHparams, DH)
-
-#endif
-
-DECLARE_PEM_rw_cb(PrivateKey, EVP_PKEY)
-
-DECLARE_PEM_rw(PUBKEY, EVP_PKEY)
-
-int PEM_write_bio_PKCS8PrivateKey_nid(BIO *bp, EVP_PKEY *x, int nid,
-				  char *kstr, int klen,
-				  pem_password_cb *cb, void *u);
-int PEM_write_bio_PKCS8PrivateKey(BIO *, EVP_PKEY *, const EVP_CIPHER *,
-                                  char *, int, pem_password_cb *, void *);
-int i2d_PKCS8PrivateKey_bio(BIO *bp, EVP_PKEY *x, const EVP_CIPHER *enc,
-				  char *kstr, int klen,
-				  pem_password_cb *cb, void *u);
-int i2d_PKCS8PrivateKey_nid_bio(BIO *bp, EVP_PKEY *x, int nid,
-				  char *kstr, int klen,
-				  pem_password_cb *cb, void *u);
-EVP_PKEY *d2i_PKCS8PrivateKey_bio(BIO *bp, EVP_PKEY **x, pem_password_cb *cb, void *u);
-
-int i2d_PKCS8PrivateKey_fp(FILE *fp, EVP_PKEY *x, const EVP_CIPHER *enc,
-				  char *kstr, int klen,
-				  pem_password_cb *cb, void *u);
-int i2d_PKCS8PrivateKey_nid_fp(FILE *fp, EVP_PKEY *x, int nid,
-				  char *kstr, int klen,
-				  pem_password_cb *cb, void *u);
-int PEM_write_PKCS8PrivateKey_nid(FILE *fp, EVP_PKEY *x, int nid,
-				  char *kstr, int klen,
-				  pem_password_cb *cb, void *u);
-
-EVP_PKEY *d2i_PKCS8PrivateKey_fp(FILE *fp, EVP_PKEY **x, pem_password_cb *cb, void *u);
-
-int PEM_write_PKCS8PrivateKey(FILE *fp,EVP_PKEY *x,const EVP_CIPHER *enc,
-			      char *kstr,int klen, pem_password_cb *cd, void *u);
-
-#endif /* SSLEAY_MACROS */
-
-
-/* BEGIN ERROR CODES */
-/* The following lines are auto generated by the script mkerr.pl. Any changes
- * made after this point may be overwritten when the script is next run.
- */
-void ERR_load_PEM_strings(void);
-
-/* Error codes for the PEM functions. */
-
-/* Function codes. */
-#define PEM_F_D2I_PKCS8PRIVATEKEY_BIO			 120
-#define PEM_F_D2I_PKCS8PRIVATEKEY_FP			 121
-#define PEM_F_DO_PK8PKEY				 126
-#define PEM_F_DO_PK8PKEY_FP				 125
-#define PEM_F_LOAD_IV					 101
-#define PEM_F_PEM_ASN1_READ				 102
-#define PEM_F_PEM_ASN1_READ_BIO				 103
-#define PEM_F_PEM_ASN1_WRITE				 104
-#define PEM_F_PEM_ASN1_WRITE_BIO			 105
-#define PEM_F_PEM_DEF_CALLBACK				 100
-#define PEM_F_PEM_DO_HEADER				 106
-#define PEM_F_PEM_F_PEM_WRITE_PKCS8PRIVATEKEY		 118
-#define PEM_F_PEM_GET_EVP_CIPHER_INFO			 107
-#define PEM_F_PEM_PK8PKEY				 119
-#define PEM_F_PEM_READ					 108
-#define PEM_F_PEM_READ_BIO				 109
-#define PEM_F_PEM_READ_BIO_PRIVATEKEY			 123
-#define PEM_F_PEM_READ_PRIVATEKEY			 124
-#define PEM_F_PEM_SEALFINAL				 110
-#define PEM_F_PEM_SEALINIT				 111
-#define PEM_F_PEM_SIGNFINAL				 112
-#define PEM_F_PEM_WRITE					 113
-#define PEM_F_PEM_WRITE_BIO				 114
-#define PEM_F_PEM_X509_INFO_READ			 115
-#define PEM_F_PEM_X509_INFO_READ_BIO			 116
-#define PEM_F_PEM_X509_INFO_WRITE_BIO			 117
-
-/* Reason codes. */
-#define PEM_R_BAD_BASE64_DECODE				 100
-#define PEM_R_BAD_DECRYPT				 101
-#define PEM_R_BAD_END_LINE				 102
-#define PEM_R_BAD_IV_CHARS				 103
-#define PEM_R_BAD_PASSWORD_READ				 104
-#define PEM_R_ERROR_CONVERTING_PRIVATE_KEY		 115
-#define PEM_R_NOT_DEK_INFO				 105
-#define PEM_R_NOT_ENCRYPTED				 106
-#define PEM_R_NOT_PROC_TYPE				 107
-#define PEM_R_NO_START_LINE				 108
-#define PEM_R_PROBLEMS_GETTING_PASSWORD			 109
-#define PEM_R_PUBLIC_KEY_NO_RSA				 110
-#define PEM_R_READ_KEY					 111
-#define PEM_R_SHORT_HEADER				 112
-#define PEM_R_UNSUPPORTED_CIPHER			 113
-#define PEM_R_UNSUPPORTED_ENCRYPTION			 114
-
-#ifdef  __cplusplus
-}
-#endif
-#endif
diff --git a/crypto/openssl/crypto/pem/pem2.h b/crypto/openssl/crypto/pem/pem2.h
deleted file mode 100644
index f31790d69cb0..000000000000
--- a/crypto/openssl/crypto/pem/pem2.h
+++ /dev/null
@@ -1,70 +0,0 @@
-/* ====================================================================
- * Copyright (c) 1999 The OpenSSL Project.  All rights reserved.
- *
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions
- * are met:
- *
- * 1. Redistributions of source code must retain the above copyright
- *    notice, this list of conditions and the following disclaimer. 
- *
- * 2. Redistributions in binary form must reproduce the above copyright
- *    notice, this list of conditions and the following disclaimer in
- *    the documentation and/or other materials provided with the
- *    distribution.
- *
- * 3. All advertising materials mentioning features or use of this
- *    software must display the following acknowledgment:
- *    "This product includes software developed by the OpenSSL Project
- *    for use in the OpenSSL Toolkit. (http://www.OpenSSL.org/)"
- *
- * 4. The names "OpenSSL Toolkit" and "OpenSSL Project" must not be used to
- *    endorse or promote products derived from this software without
- *    prior written permission. For written permission, please contact
- *    licensing@OpenSSL.org.
- *
- * 5. Products derived from this software may not be called "OpenSSL"
- *    nor may "OpenSSL" appear in their names without prior written
- *    permission of the OpenSSL Project.
- *
- * 6. Redistributions of any form whatsoever must retain the following
- *    acknowledgment:
- *    "This product includes software developed by the OpenSSL Project
- *    for use in the OpenSSL Toolkit (http://www.OpenSSL.org/)"
- *
- * THIS SOFTWARE IS PROVIDED BY THE OpenSSL PROJECT ``AS IS'' AND ANY
- * EXPRESSED OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
- * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR
- * PURPOSE ARE DISCLAIMED.  IN NO EVENT SHALL THE OpenSSL PROJECT OR
- * ITS CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
- * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
- * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
- * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
- * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
- * STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
- * ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED
- * OF THE POSSIBILITY OF SUCH DAMAGE.
- * ====================================================================
- *
- * This product includes cryptographic software written by Eric Young
- * (eay@cryptsoft.com).  This product includes software written by Tim
- * Hudson (tjh@cryptsoft.com).
- *
- */
-
-/*
- * This header only exists to break a circular dependency between pem and err
- * Ben 30 Jan 1999.
- */
-
-#ifdef __cplusplus
-extern "C" {
-#endif
-
-#ifndef HEADER_PEM_H
-void ERR_load_PEM_strings(void);
-#endif
-
-#ifdef __cplusplus
-}
-#endif
diff --git a/crypto/openssl/crypto/pem/pem_all.c b/crypto/openssl/crypto/pem/pem_all.c
deleted file mode 100644
index 66cbc7eb82cf..000000000000
--- a/crypto/openssl/crypto/pem/pem_all.c
+++ /dev/null
@@ -1,308 +0,0 @@
-/* crypto/pem/pem_all.c */
-/* Copyright (C) 1995-1998 Eric Young (eay@cryptsoft.com)
- * All rights reserved.
- *
- * This package is an SSL implementation written
- * by Eric Young (eay@cryptsoft.com).
- * The implementation was written so as to conform with Netscapes SSL.
- * 
- * This library is free for commercial and non-commercial use as long as
- * the following conditions are aheared to.  The following conditions
- * apply to all code found in this distribution, be it the RC4, RSA,
- * lhash, DES, etc., code; not just the SSL code.  The SSL documentation
- * included with this distribution is covered by the same copyright terms
- * except that the holder is Tim Hudson (tjh@cryptsoft.com).
- * 
- * Copyright remains Eric Young's, and as such any Copyright notices in
- * the code are not to be removed.
- * If this package is used in a product, Eric Young should be given attribution
- * as the author of the parts of the library used.
- * This can be in the form of a textual message at program startup or
- * in documentation (online or textual) provided with the package.
- * 
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions
- * are met:
- * 1. Redistributions of source code must retain the copyright
- *    notice, this list of conditions and the following disclaimer.
- * 2. Redistributions in binary form must reproduce the above copyright
- *    notice, this list of conditions and the following disclaimer in the
- *    documentation and/or other materials provided with the distribution.
- * 3. All advertising materials mentioning features or use of this software
- *    must display the following acknowledgement:
- *    "This product includes cryptographic software written by
- *     Eric Young (eay@cryptsoft.com)"
- *    The word 'cryptographic' can be left out if the rouines from the library
- *    being used are not cryptographic related :-).
- * 4. If you include any Windows specific code (or a derivative thereof) from 
- *    the apps directory (application code) you must include an acknowledgement:
- *    "This product includes software written by Tim Hudson (tjh@cryptsoft.com)"
- * 
- * THIS SOFTWARE IS PROVIDED BY ERIC YOUNG ``AS IS'' AND
- * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
- * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
- * ARE DISCLAIMED.  IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE
- * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
- * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
- * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
- * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
- * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
- * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
- * SUCH DAMAGE.
- * 
- * The licence and distribution terms for any publically available version or
- * derivative of this code cannot be changed.  i.e. this code cannot simply be
- * copied and put under another distribution licence
- * [including the GNU Public Licence.]
- */
-/* ====================================================================
- * Copyright (c) 1998-2002 The OpenSSL Project.  All rights reserved.
- *
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions
- * are met:
- *
- * 1. Redistributions of source code must retain the above copyright
- *    notice, this list of conditions and the following disclaimer. 
- *
- * 2. Redistributions in binary form must reproduce the above copyright
- *    notice, this list of conditions and the following disclaimer in
- *    the documentation and/or other materials provided with the
- *    distribution.
- *
- * 3. All advertising materials mentioning features or use of this
- *    software must display the following acknowledgment:
- *    "This product includes software developed by the OpenSSL Project
- *    for use in the OpenSSL Toolkit. (http://www.openssl.org/)"
- *
- * 4. The names "OpenSSL Toolkit" and "OpenSSL Project" must not be used to
- *    endorse or promote products derived from this software without
- *    prior written permission. For written permission, please contact
- *    openssl-core@openssl.org.
- *
- * 5. Products derived from this software may not be called "OpenSSL"
- *    nor may "OpenSSL" appear in their names without prior written
- *    permission of the OpenSSL Project.
- *
- * 6. Redistributions of any form whatsoever must retain the following
- *    acknowledgment:
- *    "This product includes software developed by the OpenSSL Project
- *    for use in the OpenSSL Toolkit (http://www.openssl.org/)"
- *
- * THIS SOFTWARE IS PROVIDED BY THE OpenSSL PROJECT ``AS IS'' AND ANY
- * EXPRESSED OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
- * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR
- * PURPOSE ARE DISCLAIMED.  IN NO EVENT SHALL THE OpenSSL PROJECT OR
- * ITS CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
- * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
- * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
- * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
- * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
- * STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
- * ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED
- * OF THE POSSIBILITY OF SUCH DAMAGE.
- * ====================================================================
- *
- * This product includes cryptographic software written by Eric Young
- * (eay@cryptsoft.com).  This product includes software written by Tim
- * Hudson (tjh@cryptsoft.com).
- *
- */
-
-#include <stdio.h>
-#undef SSLEAY_MACROS
-#include "cryptlib.h"
-#include <openssl/bio.h>
-#include <openssl/evp.h>
-#include <openssl/x509.h>
-#include <openssl/pkcs7.h>
-#include <openssl/pem.h>
-#ifndef OPENSSL_NO_RSA
-#include <openssl/rsa.h>
-#endif
-#ifndef OPENSSL_NO_DSA
-#include <openssl/dsa.h>
-#endif
-#ifndef OPENSSL_NO_DH
-#include <openssl/dh.h>
-#endif
-
-#ifndef OPENSSL_NO_RSA
-static RSA *pkey_get_rsa(EVP_PKEY *key, RSA **rsa);
-#endif
-#ifndef OPENSSL_NO_DSA
-static DSA *pkey_get_dsa(EVP_PKEY *key, DSA **dsa);
-#endif
-
-#ifndef OPENSSL_NO_EC
-static EC_KEY *pkey_get_eckey(EVP_PKEY *key, EC_KEY **eckey);
-#endif
-
-IMPLEMENT_PEM_rw(X509_REQ, X509_REQ, PEM_STRING_X509_REQ, X509_REQ)
-
-IMPLEMENT_PEM_write(X509_REQ_NEW, X509_REQ, PEM_STRING_X509_REQ_OLD, X509_REQ)
-
-IMPLEMENT_PEM_rw(X509_CRL, X509_CRL, PEM_STRING_X509_CRL, X509_CRL)
-
-IMPLEMENT_PEM_rw(PKCS7, PKCS7, PEM_STRING_PKCS7, PKCS7)
-
-IMPLEMENT_PEM_rw(NETSCAPE_CERT_SEQUENCE, NETSCAPE_CERT_SEQUENCE,
-					PEM_STRING_X509, NETSCAPE_CERT_SEQUENCE)
-
-
-#ifndef OPENSSL_NO_RSA
-
-/* We treat RSA or DSA private keys as a special case.
- *
- * For private keys we read in an EVP_PKEY structure with
- * PEM_read_bio_PrivateKey() and extract the relevant private
- * key: this means can handle "traditional" and PKCS#8 formats
- * transparently.
- */
-
-static RSA *pkey_get_rsa(EVP_PKEY *key, RSA **rsa)
-{
-	RSA *rtmp;
-	if(!key) return NULL;
-	rtmp = EVP_PKEY_get1_RSA(key);
-	EVP_PKEY_free(key);
-	if(!rtmp) return NULL;
-	if(rsa) {
-		RSA_free(*rsa);
-		*rsa = rtmp;
-	}
-	return rtmp;
-}
-
-RSA *PEM_read_bio_RSAPrivateKey(BIO *bp, RSA **rsa, pem_password_cb *cb,
-								void *u)
-{
-	EVP_PKEY *pktmp;
-	pktmp = PEM_read_bio_PrivateKey(bp, NULL, cb, u);
-	return pkey_get_rsa(pktmp, rsa);
-}
-
-#ifndef OPENSSL_NO_FP_API
-
-RSA *PEM_read_RSAPrivateKey(FILE *fp, RSA **rsa, pem_password_cb *cb,
-								void *u)
-{
-	EVP_PKEY *pktmp;
-	pktmp = PEM_read_PrivateKey(fp, NULL, cb, u);
-	return pkey_get_rsa(pktmp, rsa);
-}
-
-#endif
-
-IMPLEMENT_PEM_write_cb_const(RSAPrivateKey, RSA, PEM_STRING_RSA, RSAPrivateKey)
-IMPLEMENT_PEM_rw_const(RSAPublicKey, RSA, PEM_STRING_RSA_PUBLIC, RSAPublicKey)
-IMPLEMENT_PEM_rw(RSA_PUBKEY, RSA, PEM_STRING_PUBLIC, RSA_PUBKEY)
-
-#endif
-
-#ifndef OPENSSL_NO_DSA
-
-static DSA *pkey_get_dsa(EVP_PKEY *key, DSA **dsa)
-{
-	DSA *dtmp;
-	if(!key) return NULL;
-	dtmp = EVP_PKEY_get1_DSA(key);
-	EVP_PKEY_free(key);
-	if(!dtmp) return NULL;
-	if(dsa) {
-		DSA_free(*dsa);
-		*dsa = dtmp;
-	}
-	return dtmp;
-}
-
-DSA *PEM_read_bio_DSAPrivateKey(BIO *bp, DSA **dsa, pem_password_cb *cb,
-								void *u)
-{
-	EVP_PKEY *pktmp;
-	pktmp = PEM_read_bio_PrivateKey(bp, NULL, cb, u);
-	return pkey_get_dsa(pktmp, dsa);
-}
-
-IMPLEMENT_PEM_write_cb_const(DSAPrivateKey, DSA, PEM_STRING_DSA, DSAPrivateKey)
-IMPLEMENT_PEM_rw(DSA_PUBKEY, DSA, PEM_STRING_PUBLIC, DSA_PUBKEY)
-
-#ifndef OPENSSL_NO_FP_API
-
-DSA *PEM_read_DSAPrivateKey(FILE *fp, DSA **dsa, pem_password_cb *cb,
-								void *u)
-{
-	EVP_PKEY *pktmp;
-	pktmp = PEM_read_PrivateKey(fp, NULL, cb, u);
-	return pkey_get_dsa(pktmp, dsa);
-}
-
-#endif
-
-IMPLEMENT_PEM_rw_const(DSAparams, DSA, PEM_STRING_DSAPARAMS, DSAparams)
-
-#endif
-
-
-#ifndef OPENSSL_NO_EC
-static EC_KEY *pkey_get_eckey(EVP_PKEY *key, EC_KEY **eckey)
-{
-	EC_KEY *dtmp;
-	if(!key) return NULL;
-	dtmp = EVP_PKEY_get1_EC_KEY(key);
-	EVP_PKEY_free(key);
-	if(!dtmp) return NULL;
-	if(eckey) 
-	{
- 		EC_KEY_free(*eckey);
-		*eckey = dtmp;
-	}
-	return dtmp;
-}
-
-EC_KEY *PEM_read_bio_ECPrivateKey(BIO *bp, EC_KEY **key, pem_password_cb *cb,
-							void *u)
-{
-	EVP_PKEY *pktmp;
-	pktmp = PEM_read_bio_PrivateKey(bp, NULL, cb, u);
-	return pkey_get_eckey(pktmp, key);
-}
-
-IMPLEMENT_PEM_rw_const(ECPKParameters, EC_GROUP, PEM_STRING_ECPARAMETERS, ECPKParameters)
-
-IMPLEMENT_PEM_write_cb(ECPrivateKey, EC_KEY, PEM_STRING_ECPRIVATEKEY, ECPrivateKey)
-
-IMPLEMENT_PEM_rw(EC_PUBKEY, EC_KEY, PEM_STRING_PUBLIC, EC_PUBKEY)
-
-#ifndef OPENSSL_NO_FP_API
- 
-EC_KEY *PEM_read_ECPrivateKey(FILE *fp, EC_KEY **eckey, pem_password_cb *cb,
- 								void *u)
-{
-	EVP_PKEY *pktmp;
-	pktmp = PEM_read_PrivateKey(fp, NULL, cb, u);
-	return pkey_get_eckey(pktmp, eckey);
-}
-
-#endif
-
-#endif
-
-#ifndef OPENSSL_NO_DH
-
-IMPLEMENT_PEM_rw_const(DHparams, DH, PEM_STRING_DHPARAMS, DHparams)
-
-#endif
-
-
-/* The PrivateKey case is not that straightforward.
- *   IMPLEMENT_PEM_rw_cb(PrivateKey, EVP_PKEY, PEM_STRING_EVP_PKEY, PrivateKey)
- * does not work, RSA and DSA keys have specific strings.
- * (When reading, parameter PEM_STRING_EVP_PKEY is a wildcard for anything
- * appropriate.)
- */
-IMPLEMENT_PEM_write_cb(PrivateKey, EVP_PKEY, ((x->type == EVP_PKEY_DSA)?PEM_STRING_DSA:\
-			(x->type == EVP_PKEY_RSA)?PEM_STRING_RSA:PEM_STRING_ECPRIVATEKEY), PrivateKey)
-
-IMPLEMENT_PEM_rw(PUBKEY, EVP_PKEY, PEM_STRING_PUBLIC, PUBKEY)
-
diff --git a/crypto/openssl/crypto/pem/pem_err.c b/crypto/openssl/crypto/pem/pem_err.c
deleted file mode 100644
index 3133563d77b7..000000000000
--- a/crypto/openssl/crypto/pem/pem_err.c
+++ /dev/null
@@ -1,135 +0,0 @@
-/* crypto/pem/pem_err.c */
-/* ====================================================================
- * Copyright (c) 1999-2005 The OpenSSL Project.  All rights reserved.
- *
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions
- * are met:
- *
- * 1. Redistributions of source code must retain the above copyright
- *    notice, this list of conditions and the following disclaimer. 
- *
- * 2. Redistributions in binary form must reproduce the above copyright
- *    notice, this list of conditions and the following disclaimer in
- *    the documentation and/or other materials provided with the
- *    distribution.
- *
- * 3. All advertising materials mentioning features or use of this
- *    software must display the following acknowledgment:
- *    "This product includes software developed by the OpenSSL Project
- *    for use in the OpenSSL Toolkit. (http://www.OpenSSL.org/)"
- *
- * 4. The names "OpenSSL Toolkit" and "OpenSSL Project" must not be used to
- *    endorse or promote products derived from this software without
- *    prior written permission. For written permission, please contact
- *    openssl-core@OpenSSL.org.
- *
- * 5. Products derived from this software may not be called "OpenSSL"
- *    nor may "OpenSSL" appear in their names without prior written
- *    permission of the OpenSSL Project.
- *
- * 6. Redistributions of any form whatsoever must retain the following
- *    acknowledgment:
- *    "This product includes software developed by the OpenSSL Project
- *    for use in the OpenSSL Toolkit (http://www.OpenSSL.org/)"
- *
- * THIS SOFTWARE IS PROVIDED BY THE OpenSSL PROJECT ``AS IS'' AND ANY
- * EXPRESSED OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
- * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR
- * PURPOSE ARE DISCLAIMED.  IN NO EVENT SHALL THE OpenSSL PROJECT OR
- * ITS CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
- * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
- * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
- * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
- * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
- * STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
- * ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED
- * OF THE POSSIBILITY OF SUCH DAMAGE.
- * ====================================================================
- *
- * This product includes cryptographic software written by Eric Young
- * (eay@cryptsoft.com).  This product includes software written by Tim
- * Hudson (tjh@cryptsoft.com).
- *
- */
-
-/* NOTE: this file was auto generated by the mkerr.pl script: any changes
- * made to it will be overwritten when the script next updates this file,
- * only reason strings will be preserved.
- */
-
-#include <stdio.h>
-#include <openssl/err.h>
-#include <openssl/pem.h>
-
-/* BEGIN ERROR CODES */
-#ifndef OPENSSL_NO_ERR
-
-#define ERR_FUNC(func) ERR_PACK(ERR_LIB_PEM,func,0)
-#define ERR_REASON(reason) ERR_PACK(ERR_LIB_PEM,0,reason)
-
-static ERR_STRING_DATA PEM_str_functs[]=
-	{
-{ERR_FUNC(PEM_F_D2I_PKCS8PRIVATEKEY_BIO),	"d2i_PKCS8PrivateKey_bio"},
-{ERR_FUNC(PEM_F_D2I_PKCS8PRIVATEKEY_FP),	"d2i_PKCS8PrivateKey_fp"},
-{ERR_FUNC(PEM_F_DO_PK8PKEY),	"DO_PK8PKEY"},
-{ERR_FUNC(PEM_F_DO_PK8PKEY_FP),	"DO_PK8PKEY_FP"},
-{ERR_FUNC(PEM_F_LOAD_IV),	"LOAD_IV"},
-{ERR_FUNC(PEM_F_PEM_ASN1_READ),	"PEM_ASN1_read"},
-{ERR_FUNC(PEM_F_PEM_ASN1_READ_BIO),	"PEM_ASN1_read_bio"},
-{ERR_FUNC(PEM_F_PEM_ASN1_WRITE),	"PEM_ASN1_write"},
-{ERR_FUNC(PEM_F_PEM_ASN1_WRITE_BIO),	"PEM_ASN1_write_bio"},
-{ERR_FUNC(PEM_F_PEM_DEF_CALLBACK),	"PEM_def_callback"},
-{ERR_FUNC(PEM_F_PEM_DO_HEADER),	"PEM_do_header"},
-{ERR_FUNC(PEM_F_PEM_F_PEM_WRITE_PKCS8PRIVATEKEY),	"PEM_F_PEM_WRITE_PKCS8PRIVATEKEY"},
-{ERR_FUNC(PEM_F_PEM_GET_EVP_CIPHER_INFO),	"PEM_get_EVP_CIPHER_INFO"},
-{ERR_FUNC(PEM_F_PEM_PK8PKEY),	"PEM_PK8PKEY"},
-{ERR_FUNC(PEM_F_PEM_READ),	"PEM_read"},
-{ERR_FUNC(PEM_F_PEM_READ_BIO),	"PEM_read_bio"},
-{ERR_FUNC(PEM_F_PEM_READ_BIO_PRIVATEKEY),	"PEM_READ_BIO_PRIVATEKEY"},
-{ERR_FUNC(PEM_F_PEM_READ_PRIVATEKEY),	"PEM_READ_PRIVATEKEY"},
-{ERR_FUNC(PEM_F_PEM_SEALFINAL),	"PEM_SealFinal"},
-{ERR_FUNC(PEM_F_PEM_SEALINIT),	"PEM_SealInit"},
-{ERR_FUNC(PEM_F_PEM_SIGNFINAL),	"PEM_SignFinal"},
-{ERR_FUNC(PEM_F_PEM_WRITE),	"PEM_write"},
-{ERR_FUNC(PEM_F_PEM_WRITE_BIO),	"PEM_write_bio"},
-{ERR_FUNC(PEM_F_PEM_X509_INFO_READ),	"PEM_X509_INFO_read"},
-{ERR_FUNC(PEM_F_PEM_X509_INFO_READ_BIO),	"PEM_X509_INFO_read_bio"},
-{ERR_FUNC(PEM_F_PEM_X509_INFO_WRITE_BIO),	"PEM_X509_INFO_write_bio"},
-{0,NULL}
-	};
-
-static ERR_STRING_DATA PEM_str_reasons[]=
-	{
-{ERR_REASON(PEM_R_BAD_BASE64_DECODE)     ,"bad base64 decode"},
-{ERR_REASON(PEM_R_BAD_DECRYPT)           ,"bad decrypt"},
-{ERR_REASON(PEM_R_BAD_END_LINE)          ,"bad end line"},
-{ERR_REASON(PEM_R_BAD_IV_CHARS)          ,"bad iv chars"},
-{ERR_REASON(PEM_R_BAD_PASSWORD_READ)     ,"bad password read"},
-{ERR_REASON(PEM_R_ERROR_CONVERTING_PRIVATE_KEY),"error converting private key"},
-{ERR_REASON(PEM_R_NOT_DEK_INFO)          ,"not dek info"},
-{ERR_REASON(PEM_R_NOT_ENCRYPTED)         ,"not encrypted"},
-{ERR_REASON(PEM_R_NOT_PROC_TYPE)         ,"not proc type"},
-{ERR_REASON(PEM_R_NO_START_LINE)         ,"no start line"},
-{ERR_REASON(PEM_R_PROBLEMS_GETTING_PASSWORD),"problems getting password"},
-{ERR_REASON(PEM_R_PUBLIC_KEY_NO_RSA)     ,"public key no rsa"},
-{ERR_REASON(PEM_R_READ_KEY)              ,"read key"},
-{ERR_REASON(PEM_R_SHORT_HEADER)          ,"short header"},
-{ERR_REASON(PEM_R_UNSUPPORTED_CIPHER)    ,"unsupported cipher"},
-{ERR_REASON(PEM_R_UNSUPPORTED_ENCRYPTION),"unsupported encryption"},
-{0,NULL}
-	};
-
-#endif
-
-void ERR_load_PEM_strings(void)
-	{
-#ifndef OPENSSL_NO_ERR
-
-	if (ERR_func_error_string(PEM_str_functs[0].error) == NULL)
-		{
-		ERR_load_strings(0,PEM_str_functs);
-		ERR_load_strings(0,PEM_str_reasons);
-		}
-#endif
-	}
diff --git a/crypto/openssl/crypto/pem/pem_info.c b/crypto/openssl/crypto/pem/pem_info.c
deleted file mode 100644
index 1644dfcaac73..000000000000
--- a/crypto/openssl/crypto/pem/pem_info.c
+++ /dev/null
@@ -1,397 +0,0 @@
-/* crypto/pem/pem_info.c */
-/* Copyright (C) 1995-1998 Eric Young (eay@cryptsoft.com)
- * All rights reserved.
- *
- * This package is an SSL implementation written
- * by Eric Young (eay@cryptsoft.com).
- * The implementation was written so as to conform with Netscapes SSL.
- * 
- * This library is free for commercial and non-commercial use as long as
- * the following conditions are aheared to.  The following conditions
- * apply to all code found in this distribution, be it the RC4, RSA,
- * lhash, DES, etc., code; not just the SSL code.  The SSL documentation
- * included with this distribution is covered by the same copyright terms
- * except that the holder is Tim Hudson (tjh@cryptsoft.com).
- * 
- * Copyright remains Eric Young's, and as such any Copyright notices in
- * the code are not to be removed.
- * If this package is used in a product, Eric Young should be given attribution
- * as the author of the parts of the library used.
- * This can be in the form of a textual message at program startup or
- * in documentation (online or textual) provided with the package.
- * 
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions
- * are met:
- * 1. Redistributions of source code must retain the copyright
- *    notice, this list of conditions and the following disclaimer.
- * 2. Redistributions in binary form must reproduce the above copyright
- *    notice, this list of conditions and the following disclaimer in the
- *    documentation and/or other materials provided with the distribution.
- * 3. All advertising materials mentioning features or use of this software
- *    must display the following acknowledgement:
- *    "This product includes cryptographic software written by
- *     Eric Young (eay@cryptsoft.com)"
- *    The word 'cryptographic' can be left out if the rouines from the library
- *    being used are not cryptographic related :-).
- * 4. If you include any Windows specific code (or a derivative thereof) from 
- *    the apps directory (application code) you must include an acknowledgement:
- *    "This product includes software written by Tim Hudson (tjh@cryptsoft.com)"
- * 
- * THIS SOFTWARE IS PROVIDED BY ERIC YOUNG ``AS IS'' AND
- * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
- * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
- * ARE DISCLAIMED.  IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE
- * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
- * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
- * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
- * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
- * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
- * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
- * SUCH DAMAGE.
- * 
- * The licence and distribution terms for any publically available version or
- * derivative of this code cannot be changed.  i.e. this code cannot simply be
- * copied and put under another distribution licence
- * [including the GNU Public Licence.]
- */
-
-#include <stdio.h>
-#include "cryptlib.h"
-#include <openssl/buffer.h>
-#include <openssl/objects.h>
-#include <openssl/evp.h>
-#include <openssl/x509.h>
-#include <openssl/pem.h>
-#ifndef OPENSSL_NO_RSA
-#include <openssl/rsa.h>
-#endif
-#ifndef OPENSSL_NO_DSA
-#include <openssl/dsa.h>
-#endif
-
-#ifndef OPENSSL_NO_FP_API
-STACK_OF(X509_INFO) *PEM_X509_INFO_read(FILE *fp, STACK_OF(X509_INFO) *sk, pem_password_cb *cb, void *u)
-	{
-        BIO *b;
-        STACK_OF(X509_INFO) *ret;
-
-        if ((b=BIO_new(BIO_s_file())) == NULL)
-		{
-		PEMerr(PEM_F_PEM_X509_INFO_READ,ERR_R_BUF_LIB);
-                return(0);
-		}
-        BIO_set_fp(b,fp,BIO_NOCLOSE);
-        ret=PEM_X509_INFO_read_bio(b,sk,cb,u);
-        BIO_free(b);
-        return(ret);
-	}
-#endif
-
-STACK_OF(X509_INFO) *PEM_X509_INFO_read_bio(BIO *bp, STACK_OF(X509_INFO) *sk, pem_password_cb *cb, void *u)
-	{
-	X509_INFO *xi=NULL;
-	char *name=NULL,*header=NULL;
-	void *pp;
-	unsigned char *data=NULL;
-	const unsigned char *p;
-	long len,error=0;
-	int ok=0;
-	STACK_OF(X509_INFO) *ret=NULL;
-	unsigned int i,raw;
-	d2i_of_void *d2i;
-
-	if (sk == NULL)
-		{
-		if ((ret=sk_X509_INFO_new_null()) == NULL)
-			{
-			PEMerr(PEM_F_PEM_X509_INFO_READ_BIO,ERR_R_MALLOC_FAILURE);
-			goto err;
-			}
-		}
-	else
-		ret=sk;
-
-	if ((xi=X509_INFO_new()) == NULL) goto err;
-	for (;;)
-		{
-		raw=0;
-		i=PEM_read_bio(bp,&name,&header,&data,&len);
-		if (i == 0)
-			{
-			error=ERR_GET_REASON(ERR_peek_last_error());
-			if (error == PEM_R_NO_START_LINE)
-				{
-				ERR_clear_error();
-				break;
-				}
-			goto err;
-			}
-start:
-		if (	(strcmp(name,PEM_STRING_X509) == 0) ||
-			(strcmp(name,PEM_STRING_X509_OLD) == 0))
-			{
-			d2i=(D2I_OF(void))d2i_X509;
-			if (xi->x509 != NULL)
-				{
-				if (!sk_X509_INFO_push(ret,xi)) goto err;
-				if ((xi=X509_INFO_new()) == NULL) goto err;
-				goto start;
-				}
-			pp=&(xi->x509);
-			}
-		else if ((strcmp(name,PEM_STRING_X509_TRUSTED) == 0))
-			{
-			d2i=(D2I_OF(void))d2i_X509_AUX;
-			if (xi->x509 != NULL)
-				{
-				if (!sk_X509_INFO_push(ret,xi)) goto err;
-				if ((xi=X509_INFO_new()) == NULL) goto err;
-				goto start;
-				}
-			pp=&(xi->x509);
-			}
-		else if (strcmp(name,PEM_STRING_X509_CRL) == 0)
-			{
-			d2i=(D2I_OF(void))d2i_X509_CRL;
-			if (xi->crl != NULL)
-				{
-				if (!sk_X509_INFO_push(ret,xi)) goto err;
-				if ((xi=X509_INFO_new()) == NULL) goto err;
-				goto start;
-				}
-			pp=&(xi->crl);
-			}
-		else
-#ifndef OPENSSL_NO_RSA
-			if (strcmp(name,PEM_STRING_RSA) == 0)
-			{
-			d2i=(D2I_OF(void))d2i_RSAPrivateKey;
-			if (xi->x_pkey != NULL) 
-				{
-				if (!sk_X509_INFO_push(ret,xi)) goto err;
-				if ((xi=X509_INFO_new()) == NULL) goto err;
-				goto start;
-				}
-
-			xi->enc_data=NULL;
-			xi->enc_len=0;
-
-			xi->x_pkey=X509_PKEY_new();
-			if ((xi->x_pkey->dec_pkey=EVP_PKEY_new()) == NULL)
-				goto err;
-			xi->x_pkey->dec_pkey->type=EVP_PKEY_RSA;
-			pp=&(xi->x_pkey->dec_pkey->pkey.rsa);
-			if ((int)strlen(header) > 10) /* assume encrypted */
-				raw=1;
-			}
-		else
-#endif
-#ifndef OPENSSL_NO_DSA
-			if (strcmp(name,PEM_STRING_DSA) == 0)
-			{
-			d2i=(D2I_OF(void))d2i_DSAPrivateKey;
-			if (xi->x_pkey != NULL) 
-				{
-				if (!sk_X509_INFO_push(ret,xi)) goto err;
-				if ((xi=X509_INFO_new()) == NULL) goto err;
-				goto start;
-				}
-
-			xi->enc_data=NULL;
-			xi->enc_len=0;
-
-			xi->x_pkey=X509_PKEY_new();
-			if ((xi->x_pkey->dec_pkey=EVP_PKEY_new()) == NULL)
-				goto err;
-			xi->x_pkey->dec_pkey->type=EVP_PKEY_DSA;
-			pp=(char **)&(xi->x_pkey->dec_pkey->pkey.dsa);
-			if ((int)strlen(header) > 10) /* assume encrypted */
-				raw=1;
-			}
-		else
-#endif
-#ifndef OPENSSL_NO_EC
- 			if (strcmp(name,PEM_STRING_ECPRIVATEKEY) == 0)
- 			{
- 				d2i=(D2I_OF(void))d2i_ECPrivateKey;
- 				if (xi->x_pkey != NULL) 
- 				{
- 					if (!sk_X509_INFO_push(ret,xi)) goto err;
- 					if ((xi=X509_INFO_new()) == NULL) goto err;
- 						goto start;
- 				}
- 
- 			xi->enc_data=NULL;
- 			xi->enc_len=0;
- 
- 			xi->x_pkey=X509_PKEY_new();
- 			if ((xi->x_pkey->dec_pkey=EVP_PKEY_new()) == NULL)
- 				goto err;
- 			xi->x_pkey->dec_pkey->type=EVP_PKEY_EC;
- 			pp=&(xi->x_pkey->dec_pkey->pkey.ec);
- 			if ((int)strlen(header) > 10) /* assume encrypted */
- 				raw=1;
-			}
-		else
-#endif
-			{
-			d2i=NULL;
-			pp=NULL;
-			}
-
-		if (d2i != NULL)
-			{
-			if (!raw)
-				{
-				EVP_CIPHER_INFO cipher;
-
-				if (!PEM_get_EVP_CIPHER_INFO(header,&cipher))
-					goto err;
-				if (!PEM_do_header(&cipher,data,&len,cb,u))
-					goto err;
-				p=data;
-				if (d2i(pp,&p,len) == NULL)
-					{
-					PEMerr(PEM_F_PEM_X509_INFO_READ_BIO,ERR_R_ASN1_LIB);
-					goto err;
-					}
-				}
-			else
-				{ /* encrypted RSA data */
-				if (!PEM_get_EVP_CIPHER_INFO(header,
-					&xi->enc_cipher)) goto err;
-				xi->enc_data=(char *)data;
-				xi->enc_len=(int)len;
-				data=NULL;
-				}
-			}
-		else	{
-			/* unknown */
-			}
-		if (name != NULL) OPENSSL_free(name);
-		if (header != NULL) OPENSSL_free(header);
-		if (data != NULL) OPENSSL_free(data);
-		name=NULL;
-		header=NULL;
-		data=NULL;
-		}
-
-	/* if the last one hasn't been pushed yet and there is anything
-	 * in it then add it to the stack ... 
-	 */
-	if ((xi->x509 != NULL) || (xi->crl != NULL) ||
-		(xi->x_pkey != NULL) || (xi->enc_data != NULL))
-		{
-		if (!sk_X509_INFO_push(ret,xi)) goto err;
-		xi=NULL;
-		}
-	ok=1;
-err:
-	if (xi != NULL) X509_INFO_free(xi);
-	if (!ok)
-		{
-		for (i=0; ((int)i)<sk_X509_INFO_num(ret); i++)
-			{
-			xi=sk_X509_INFO_value(ret,i);
-			X509_INFO_free(xi);
-			}
-		if (ret != sk) sk_X509_INFO_free(ret);
-		ret=NULL;
-		}
-		
-	if (name != NULL) OPENSSL_free(name);
-	if (header != NULL) OPENSSL_free(header);
-	if (data != NULL) OPENSSL_free(data);
-	return(ret);
-	}
-
-
-/* A TJH addition */
-int PEM_X509_INFO_write_bio(BIO *bp, X509_INFO *xi, EVP_CIPHER *enc,
-	     unsigned char *kstr, int klen, pem_password_cb *cb, void *u)
-	{
-	EVP_CIPHER_CTX ctx;
-	int i,ret=0;
-	unsigned char *data=NULL;
-	const char *objstr=NULL;
-	char buf[PEM_BUFSIZE];
-	unsigned char *iv=NULL;
-	
-	if (enc != NULL)
-		{
-		objstr=OBJ_nid2sn(EVP_CIPHER_nid(enc));
-		if (objstr == NULL)
-			{
-			PEMerr(PEM_F_PEM_X509_INFO_WRITE_BIO,PEM_R_UNSUPPORTED_CIPHER);
-			goto err;
-			}
-		}
-
-	/* now for the fun part ... if we have a private key then 
-	 * we have to be able to handle a not-yet-decrypted key
-	 * being written out correctly ... if it is decrypted or
-	 * it is non-encrypted then we use the base code
-	 */
-	if (xi->x_pkey!=NULL)
-		{
-		if ( (xi->enc_data!=NULL) && (xi->enc_len>0) )
-			{
-			/* copy from weirdo names into more normal things */
-			iv=xi->enc_cipher.iv;
-			data=(unsigned char *)xi->enc_data;
-			i=xi->enc_len;
-
-			/* we take the encryption data from the
-			 * internal stuff rather than what the
-			 * user has passed us ... as we have to 
-			 * match exactly for some strange reason
-			 */
-			objstr=OBJ_nid2sn(
-				EVP_CIPHER_nid(xi->enc_cipher.cipher));
-			if (objstr == NULL)
-				{
-				PEMerr(PEM_F_PEM_X509_INFO_WRITE_BIO,PEM_R_UNSUPPORTED_CIPHER);
-				goto err;
-				}
-
-			/* create the right magic header stuff */
-			OPENSSL_assert(strlen(objstr)+23+2*enc->iv_len+13 <= sizeof buf);
-			buf[0]='\0';
-			PEM_proc_type(buf,PEM_TYPE_ENCRYPTED);
-			PEM_dek_info(buf,objstr,enc->iv_len,(char *)iv);
-
-			/* use the normal code to write things out */
-			i=PEM_write_bio(bp,PEM_STRING_RSA,buf,data,i);
-			if (i <= 0) goto err;
-			}
-		else
-			{
-			/* Add DSA/DH */
-#ifndef OPENSSL_NO_RSA
-			/* normal optionally encrypted stuff */
-			if (PEM_write_bio_RSAPrivateKey(bp,
-				xi->x_pkey->dec_pkey->pkey.rsa,
-				enc,kstr,klen,cb,u)<=0)
-				goto err;
-#endif
-			}
-		}
-
-	/* if we have a certificate then write it out now */
-	if ((xi->x509 != NULL) && (PEM_write_bio_X509(bp,xi->x509) <= 0))
-		goto err;
-
-	/* we are ignoring anything else that is loaded into the X509_INFO
-	 * structure for the moment ... as I don't need it so I'm not
-	 * coding it here and Eric can do it when this makes it into the
-	 * base library --tjh
-	 */
-
-	ret=1;
-
-err:
-	OPENSSL_cleanse((char *)&ctx,sizeof(ctx));
-	OPENSSL_cleanse(buf,PEM_BUFSIZE);
-	return(ret);
-	}
diff --git a/crypto/openssl/crypto/pem/pem_lib.c b/crypto/openssl/crypto/pem/pem_lib.c
deleted file mode 100644
index 9bae4c8850c7..000000000000
--- a/crypto/openssl/crypto/pem/pem_lib.c
+++ /dev/null
@@ -1,781 +0,0 @@
-/* crypto/pem/pem_lib.c */
-/* Copyright (C) 1995-1998 Eric Young (eay@cryptsoft.com)
- * All rights reserved.
- *
- * This package is an SSL implementation written
- * by Eric Young (eay@cryptsoft.com).
- * The implementation was written so as to conform with Netscapes SSL.
- * 
- * This library is free for commercial and non-commercial use as long as
- * the following conditions are aheared to.  The following conditions
- * apply to all code found in this distribution, be it the RC4, RSA,
- * lhash, DES, etc., code; not just the SSL code.  The SSL documentation
- * included with this distribution is covered by the same copyright terms
- * except that the holder is Tim Hudson (tjh@cryptsoft.com).
- * 
- * Copyright remains Eric Young's, and as such any Copyright notices in
- * the code are not to be removed.
- * If this package is used in a product, Eric Young should be given attribution
- * as the author of the parts of the library used.
- * This can be in the form of a textual message at program startup or
- * in documentation (online or textual) provided with the package.
- * 
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions
- * are met:
- * 1. Redistributions of source code must retain the copyright
- *    notice, this list of conditions and the following disclaimer.
- * 2. Redistributions in binary form must reproduce the above copyright
- *    notice, this list of conditions and the following disclaimer in the
- *    documentation and/or other materials provided with the distribution.
- * 3. All advertising materials mentioning features or use of this software
- *    must display the following acknowledgement:
- *    "This product includes cryptographic software written by
- *     Eric Young (eay@cryptsoft.com)"
- *    The word 'cryptographic' can be left out if the rouines from the library
- *    being used are not cryptographic related :-).
- * 4. If you include any Windows specific code (or a derivative thereof) from 
- *    the apps directory (application code) you must include an acknowledgement:
- *    "This product includes software written by Tim Hudson (tjh@cryptsoft.com)"
- * 
- * THIS SOFTWARE IS PROVIDED BY ERIC YOUNG ``AS IS'' AND
- * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
- * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
- * ARE DISCLAIMED.  IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE
- * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
- * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
- * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
- * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
- * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
- * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
- * SUCH DAMAGE.
- * 
- * The licence and distribution terms for any publically available version or
- * derivative of this code cannot be changed.  i.e. this code cannot simply be
- * copied and put under another distribution licence
- * [including the GNU Public Licence.]
- */
-
-#include <stdio.h>
-#include "cryptlib.h"
-#include <openssl/buffer.h>
-#include <openssl/objects.h>
-#include <openssl/evp.h>
-#include <openssl/rand.h>
-#include <openssl/x509.h>
-#include <openssl/pem.h>
-#include <openssl/pkcs12.h>
-#ifndef OPENSSL_NO_DES
-#include <openssl/des.h>
-#endif
-
-const char PEM_version[]="PEM" OPENSSL_VERSION_PTEXT;
-
-#define MIN_LENGTH	4
-
-static int load_iv(char **fromp,unsigned char *to, int num);
-static int check_pem(const char *nm, const char *name);
-
-int PEM_def_callback(char *buf, int num, int w, void *key)
-	{
-#ifdef OPENSSL_NO_FP_API
-	/* We should not ever call the default callback routine from
-	 * windows. */
-	PEMerr(PEM_F_PEM_DEF_CALLBACK,ERR_R_SHOULD_NOT_HAVE_BEEN_CALLED);
-	return(-1);
-#else
-	int i,j;
-	const char *prompt;
-	if(key) {
-		i=strlen(key);
-		i=(i > num)?num:i;
-		memcpy(buf,key,i);
-		return(i);
-	}
-
-	prompt=EVP_get_pw_prompt();
-	if (prompt == NULL)
-		prompt="Enter PEM pass phrase:";
-
-	for (;;)
-		{
-		i=EVP_read_pw_string(buf,num,prompt,w);
-		if (i != 0)
-			{
-			PEMerr(PEM_F_PEM_DEF_CALLBACK,PEM_R_PROBLEMS_GETTING_PASSWORD);
-			memset(buf,0,(unsigned int)num);
-			return(-1);
-			}
-		j=strlen(buf);
-		if (j < MIN_LENGTH)
-			{
-			fprintf(stderr,"phrase is too short, needs to be at least %d chars\n",MIN_LENGTH);
-			}
-		else
-			break;
-		}
-	return(j);
-#endif
-	}
-
-void PEM_proc_type(char *buf, int type)
-	{
-	const char *str;
-
-	if (type == PEM_TYPE_ENCRYPTED)
-		str="ENCRYPTED";
-	else if (type == PEM_TYPE_MIC_CLEAR)
-		str="MIC-CLEAR";
-	else if (type == PEM_TYPE_MIC_ONLY)
-		str="MIC-ONLY";
-	else
-		str="BAD-TYPE";
-		
-	BUF_strlcat(buf,"Proc-Type: 4,",PEM_BUFSIZE);
-	BUF_strlcat(buf,str,PEM_BUFSIZE);
-	BUF_strlcat(buf,"\n",PEM_BUFSIZE);
-	}
-
-void PEM_dek_info(char *buf, const char *type, int len, char *str)
-	{
-	static const unsigned char map[17]="0123456789ABCDEF";
-	long i;
-	int j;
-
-	BUF_strlcat(buf,"DEK-Info: ",PEM_BUFSIZE);
-	BUF_strlcat(buf,type,PEM_BUFSIZE);
-	BUF_strlcat(buf,",",PEM_BUFSIZE);
-	j=strlen(buf);
-	if (j + (len * 2) + 1 > PEM_BUFSIZE)
-        	return;
-	for (i=0; i<len; i++)
-		{
-		buf[j+i*2]  =map[(str[i]>>4)&0x0f];
-		buf[j+i*2+1]=map[(str[i]   )&0x0f];
-		}
-	buf[j+i*2]='\n';
-	buf[j+i*2+1]='\0';
-	}
-
-#ifndef OPENSSL_NO_FP_API
-void *PEM_ASN1_read(d2i_of_void *d2i, const char *name, FILE *fp, void **x,
-		    pem_password_cb *cb, void *u)
-	{
-        BIO *b;
-        void *ret;
-
-        if ((b=BIO_new(BIO_s_file())) == NULL)
-		{
-		PEMerr(PEM_F_PEM_ASN1_READ,ERR_R_BUF_LIB);
-                return(0);
-		}
-        BIO_set_fp(b,fp,BIO_NOCLOSE);
-        ret=PEM_ASN1_read_bio(d2i,name,b,x,cb,u);
-        BIO_free(b);
-        return(ret);
-	}
-#endif
-
-static int check_pem(const char *nm, const char *name)
-{
-	/* Normal matching nm and name */
-	if (!strcmp(nm,name)) return 1;
-
-	/* Make PEM_STRING_EVP_PKEY match any private key */
-
-	if(!strcmp(nm,PEM_STRING_PKCS8) &&
-		!strcmp(name,PEM_STRING_EVP_PKEY)) return 1;
-
-	if(!strcmp(nm,PEM_STRING_PKCS8INF) &&
-		 !strcmp(name,PEM_STRING_EVP_PKEY)) return 1;
-
-	if(!strcmp(nm,PEM_STRING_RSA) &&
-		!strcmp(name,PEM_STRING_EVP_PKEY)) return 1;
-
-	if(!strcmp(nm,PEM_STRING_DSA) &&
-		 !strcmp(name,PEM_STRING_EVP_PKEY)) return 1;
-
- 	if(!strcmp(nm,PEM_STRING_ECPRIVATEKEY) &&
- 		 !strcmp(name,PEM_STRING_EVP_PKEY)) return 1;
-	/* Permit older strings */
-
-	if(!strcmp(nm,PEM_STRING_X509_OLD) &&
-		!strcmp(name,PEM_STRING_X509)) return 1;
-
-	if(!strcmp(nm,PEM_STRING_X509_REQ_OLD) &&
-		!strcmp(name,PEM_STRING_X509_REQ)) return 1;
-
-	/* Allow normal certs to be read as trusted certs */
-	if(!strcmp(nm,PEM_STRING_X509) &&
-		!strcmp(name,PEM_STRING_X509_TRUSTED)) return 1;
-
-	if(!strcmp(nm,PEM_STRING_X509_OLD) &&
-		!strcmp(name,PEM_STRING_X509_TRUSTED)) return 1;
-
-	/* Some CAs use PKCS#7 with CERTIFICATE headers */
-	if(!strcmp(nm, PEM_STRING_X509) &&
-		!strcmp(name, PEM_STRING_PKCS7)) return 1;
-
-	return 0;
-}
-
-int PEM_bytes_read_bio(unsigned char **pdata, long *plen, char **pnm, const char *name, BIO *bp,
-	     pem_password_cb *cb, void *u)
-	{
-	EVP_CIPHER_INFO cipher;
-	char *nm=NULL,*header=NULL;
-	unsigned char *data=NULL;
-	long len;
-	int ret = 0;
-
-	for (;;)
-		{
-		if (!PEM_read_bio(bp,&nm,&header,&data,&len)) {
-			if(ERR_GET_REASON(ERR_peek_error()) ==
-				PEM_R_NO_START_LINE)
-				ERR_add_error_data(2, "Expecting: ", name);
-			return 0;
-		}
-		if(check_pem(nm, name)) break;
-		OPENSSL_free(nm);
-		OPENSSL_free(header);
-		OPENSSL_free(data);
-		}
-	if (!PEM_get_EVP_CIPHER_INFO(header,&cipher)) goto err;
-	if (!PEM_do_header(&cipher,data,&len,cb,u)) goto err;
-
-	*pdata = data;
-	*plen = len;
-
-	if (pnm)
-		*pnm = nm;
-
-	ret = 1;
-
-err:
-	if (!ret || !pnm) OPENSSL_free(nm);
-	OPENSSL_free(header);
-	if (!ret) OPENSSL_free(data);
-	return ret;
-	}
-
-#ifndef OPENSSL_NO_FP_API
-int PEM_ASN1_write(i2d_of_void *i2d, const char *name, FILE *fp,
-		   char *x, const EVP_CIPHER *enc, unsigned char *kstr,
-		   int klen, pem_password_cb *callback, void *u)
-        {
-        BIO *b;
-        int ret;
-
-        if ((b=BIO_new(BIO_s_file())) == NULL)
-		{
-		PEMerr(PEM_F_PEM_ASN1_WRITE,ERR_R_BUF_LIB);
-                return(0);
-		}
-        BIO_set_fp(b,fp,BIO_NOCLOSE);
-        ret=PEM_ASN1_write_bio(i2d,name,b,x,enc,kstr,klen,callback,u);
-        BIO_free(b);
-        return(ret);
-        }
-#endif
-
-int PEM_ASN1_write_bio(i2d_of_void *i2d, const char *name, BIO *bp,
-		       char *x, const EVP_CIPHER *enc, unsigned char *kstr,
-		       int klen, pem_password_cb *callback, void *u)
-	{
-	EVP_CIPHER_CTX ctx;
-	int dsize=0,i,j,ret=0;
-	unsigned char *p,*data=NULL;
-	const char *objstr=NULL;
-	char buf[PEM_BUFSIZE];
-	unsigned char key[EVP_MAX_KEY_LENGTH];
-	unsigned char iv[EVP_MAX_IV_LENGTH];
-	
-	if (enc != NULL)
-		{
-		objstr=OBJ_nid2sn(EVP_CIPHER_nid(enc));
-		if (objstr == NULL)
-			{
-			PEMerr(PEM_F_PEM_ASN1_WRITE_BIO,PEM_R_UNSUPPORTED_CIPHER);
-			goto err;
-			}
-		}
-
-	if ((dsize=i2d(x,NULL)) < 0)
-		{
-		PEMerr(PEM_F_PEM_ASN1_WRITE_BIO,ERR_R_ASN1_LIB);
-		dsize=0;
-		goto err;
-		}
-	/* dzise + 8 bytes are needed */
-	/* actually it needs the cipher block size extra... */
-	data=(unsigned char *)OPENSSL_malloc((unsigned int)dsize+20);
-	if (data == NULL)
-		{
-		PEMerr(PEM_F_PEM_ASN1_WRITE_BIO,ERR_R_MALLOC_FAILURE);
-		goto err;
-		}
-	p=data;
-	i=i2d(x,&p);
-
-	if (enc != NULL)
-		{
-		if (kstr == NULL)
-			{
-			if (callback == NULL)
-				klen=PEM_def_callback(buf,PEM_BUFSIZE,1,u);
-			else
-				klen=(*callback)(buf,PEM_BUFSIZE,1,u);
-			if (klen <= 0)
-				{
-				PEMerr(PEM_F_PEM_ASN1_WRITE_BIO,PEM_R_READ_KEY);
-				goto err;
-				}
-#ifdef CHARSET_EBCDIC
-			/* Convert the pass phrase from EBCDIC */
-			ebcdic2ascii(buf, buf, klen);
-#endif
-			kstr=(unsigned char *)buf;
-			}
-		RAND_add(data,i,0);/* put in the RSA key. */
-		OPENSSL_assert(enc->iv_len <= (int)sizeof(iv));
-		if (RAND_pseudo_bytes(iv,enc->iv_len) < 0) /* Generate a salt */
-			goto err;
-		/* The 'iv' is used as the iv and as a salt.  It is
-		 * NOT taken from the BytesToKey function */
-		EVP_BytesToKey(enc,EVP_md5(),iv,kstr,klen,1,key,NULL);
-
-		if (kstr == (unsigned char *)buf) OPENSSL_cleanse(buf,PEM_BUFSIZE);
-
-		OPENSSL_assert(strlen(objstr)+23+2*enc->iv_len+13 <= sizeof buf);
-
-		buf[0]='\0';
-		PEM_proc_type(buf,PEM_TYPE_ENCRYPTED);
-		PEM_dek_info(buf,objstr,enc->iv_len,(char *)iv);
-		/* k=strlen(buf); */
-
-		EVP_CIPHER_CTX_init(&ctx);
-		EVP_EncryptInit_ex(&ctx,enc,NULL,key,iv);
-		EVP_EncryptUpdate(&ctx,data,&j,data,i);
-		EVP_EncryptFinal_ex(&ctx,&(data[j]),&i);
-		EVP_CIPHER_CTX_cleanup(&ctx);
-		i+=j;
-		ret=1;
-		}
-	else
-		{
-		ret=1;
-		buf[0]='\0';
-		}
-	i=PEM_write_bio(bp,name,buf,data,i);
-	if (i <= 0) ret=0;
-err:
-	OPENSSL_cleanse(key,sizeof(key));
-	OPENSSL_cleanse(iv,sizeof(iv));
-	OPENSSL_cleanse((char *)&ctx,sizeof(ctx));
-	OPENSSL_cleanse(buf,PEM_BUFSIZE);
-	if (data != NULL)
-		{
-		OPENSSL_cleanse(data,(unsigned int)dsize);
-		OPENSSL_free(data);
-		}
-	return(ret);
-	}
-
-int PEM_do_header(EVP_CIPHER_INFO *cipher, unsigned char *data, long *plen,
-	     pem_password_cb *callback,void *u)
-	{
-	int i,j,o,klen;
-	long len;
-	EVP_CIPHER_CTX ctx;
-	unsigned char key[EVP_MAX_KEY_LENGTH];
-	char buf[PEM_BUFSIZE];
-
-	len= *plen;
-
-	if (cipher->cipher == NULL) return(1);
-	if (callback == NULL)
-		klen=PEM_def_callback(buf,PEM_BUFSIZE,0,u);
-	else
-		klen=callback(buf,PEM_BUFSIZE,0,u);
-	if (klen <= 0)
-		{
-		PEMerr(PEM_F_PEM_DO_HEADER,PEM_R_BAD_PASSWORD_READ);
-		return(0);
-		}
-#ifdef CHARSET_EBCDIC
-	/* Convert the pass phrase from EBCDIC */
-	ebcdic2ascii(buf, buf, klen);
-#endif
-
-	EVP_BytesToKey(cipher->cipher,EVP_md5(),&(cipher->iv[0]),
-		(unsigned char *)buf,klen,1,key,NULL);
-
-	j=(int)len;
-	EVP_CIPHER_CTX_init(&ctx);
-	EVP_DecryptInit_ex(&ctx,cipher->cipher,NULL, key,&(cipher->iv[0]));
-	EVP_DecryptUpdate(&ctx,data,&i,data,j);
-	o=EVP_DecryptFinal_ex(&ctx,&(data[i]),&j);
-	EVP_CIPHER_CTX_cleanup(&ctx);
-	OPENSSL_cleanse((char *)buf,sizeof(buf));
-	OPENSSL_cleanse((char *)key,sizeof(key));
-	j+=i;
-	if (!o)
-		{
-		PEMerr(PEM_F_PEM_DO_HEADER,PEM_R_BAD_DECRYPT);
-		return(0);
-		}
-	*plen=j;
-	return(1);
-	}
-
-int PEM_get_EVP_CIPHER_INFO(char *header, EVP_CIPHER_INFO *cipher)
-	{
-	int o;
-	const EVP_CIPHER *enc=NULL;
-	char *p,c;
-	char **header_pp = &header;
-
-	cipher->cipher=NULL;
-	if ((header == NULL) || (*header == '\0') || (*header == '\n'))
-		return(1);
-	if (strncmp(header,"Proc-Type: ",11) != 0)
-		{ PEMerr(PEM_F_PEM_GET_EVP_CIPHER_INFO,PEM_R_NOT_PROC_TYPE); return(0); }
-	header+=11;
-	if (*header != '4') return(0); header++;
-	if (*header != ',') return(0); header++;
-	if (strncmp(header,"ENCRYPTED",9) != 0)
-		{ PEMerr(PEM_F_PEM_GET_EVP_CIPHER_INFO,PEM_R_NOT_ENCRYPTED); return(0); }
-	for (; (*header != '\n') && (*header != '\0'); header++)
-		;
-	if (*header == '\0')
-		{ PEMerr(PEM_F_PEM_GET_EVP_CIPHER_INFO,PEM_R_SHORT_HEADER); return(0); }
-	header++;
-	if (strncmp(header,"DEK-Info: ",10) != 0)
-		{ PEMerr(PEM_F_PEM_GET_EVP_CIPHER_INFO,PEM_R_NOT_DEK_INFO); return(0); }
-	header+=10;
-
-	p=header;
-	for (;;)
-		{
-		c= *header;
-#ifndef CHARSET_EBCDIC
-		if (!(	((c >= 'A') && (c <= 'Z')) || (c == '-') ||
-			((c >= '0') && (c <= '9'))))
-			break;
-#else
-		if (!(	isupper(c) || (c == '-') ||
-			isdigit(c)))
-			break;
-#endif
-		header++;
-		}
-	*header='\0';
-	o=OBJ_sn2nid(p);
-	cipher->cipher=enc=EVP_get_cipherbyname(p);
-	*header=c;
-	header++;
-
-	if (enc == NULL)
-		{
-		PEMerr(PEM_F_PEM_GET_EVP_CIPHER_INFO,PEM_R_UNSUPPORTED_ENCRYPTION);
-		return(0);
-		}
-	if (!load_iv(header_pp,&(cipher->iv[0]),enc->iv_len))
-		return(0);
-
-	return(1);
-	}
-
-static int load_iv(char **fromp, unsigned char *to, int num)
-	{
-	int v,i;
-	char *from;
-
-	from= *fromp;
-	for (i=0; i<num; i++) to[i]=0;
-	num*=2;
-	for (i=0; i<num; i++)
-		{
-		if ((*from >= '0') && (*from <= '9'))
-			v= *from-'0';
-		else if ((*from >= 'A') && (*from <= 'F'))
-			v= *from-'A'+10;
-		else if ((*from >= 'a') && (*from <= 'f'))
-			v= *from-'a'+10;
-		else
-			{
-			PEMerr(PEM_F_LOAD_IV,PEM_R_BAD_IV_CHARS);
-			return(0);
-			}
-		from++;
-		to[i/2]|=v<<(long)((!(i&1))*4);
-		}
-
-	*fromp=from;
-	return(1);
-	}
-
-#ifndef OPENSSL_NO_FP_API
-int PEM_write(FILE *fp, char *name, char *header, unsigned char *data,
-	     long len)
-        {
-        BIO *b;
-        int ret;
-
-        if ((b=BIO_new(BIO_s_file())) == NULL)
-		{
-		PEMerr(PEM_F_PEM_WRITE,ERR_R_BUF_LIB);
-                return(0);
-		}
-        BIO_set_fp(b,fp,BIO_NOCLOSE);
-        ret=PEM_write_bio(b, name, header, data,len);
-        BIO_free(b);
-        return(ret);
-        }
-#endif
-
-int PEM_write_bio(BIO *bp, const char *name, char *header, unsigned char *data,
-	     long len)
-	{
-	int nlen,n,i,j,outl;
-	unsigned char *buf = NULL;
-	EVP_ENCODE_CTX ctx;
-	int reason=ERR_R_BUF_LIB;
-	
-	EVP_EncodeInit(&ctx);
-	nlen=strlen(name);
-
-	if (	(BIO_write(bp,"-----BEGIN ",11) != 11) ||
-		(BIO_write(bp,name,nlen) != nlen) ||
-		(BIO_write(bp,"-----\n",6) != 6))
-		goto err;
-		
-	i=strlen(header);
-	if (i > 0)
-		{
-		if (	(BIO_write(bp,header,i) != i) ||
-			(BIO_write(bp,"\n",1) != 1))
-			goto err;
-		}
-
-	buf = OPENSSL_malloc(PEM_BUFSIZE*8);
-	if (buf == NULL)
-		{
-		reason=ERR_R_MALLOC_FAILURE;
-		goto err;
-		}
-
-	i=j=0;
-	while (len > 0)
-		{
-		n=(int)((len>(PEM_BUFSIZE*5))?(PEM_BUFSIZE*5):len);
-		EVP_EncodeUpdate(&ctx,buf,&outl,&(data[j]),n);
-		if ((outl) && (BIO_write(bp,(char *)buf,outl) != outl))
-			goto err;
-		i+=outl;
-		len-=n;
-		j+=n;
-		}
-	EVP_EncodeFinal(&ctx,buf,&outl);
-	if ((outl > 0) && (BIO_write(bp,(char *)buf,outl) != outl)) goto err;
-	OPENSSL_cleanse(buf, PEM_BUFSIZE*8);
-	OPENSSL_free(buf);
-	buf = NULL;
-	if (	(BIO_write(bp,"-----END ",9) != 9) ||
-		(BIO_write(bp,name,nlen) != nlen) ||
-		(BIO_write(bp,"-----\n",6) != 6))
-		goto err;
-	return(i+outl);
-err:
-	if (buf) {
-		OPENSSL_cleanse(buf, PEM_BUFSIZE*8);
-		OPENSSL_free(buf);
-	}
-	PEMerr(PEM_F_PEM_WRITE_BIO,reason);
-	return(0);
-	}
-
-#ifndef OPENSSL_NO_FP_API
-int PEM_read(FILE *fp, char **name, char **header, unsigned char **data,
-	     long *len)
-        {
-        BIO *b;
-        int ret;
-
-        if ((b=BIO_new(BIO_s_file())) == NULL)
-		{
-		PEMerr(PEM_F_PEM_READ,ERR_R_BUF_LIB);
-                return(0);
-		}
-        BIO_set_fp(b,fp,BIO_NOCLOSE);
-        ret=PEM_read_bio(b, name, header, data,len);
-        BIO_free(b);
-        return(ret);
-        }
-#endif
-
-int PEM_read_bio(BIO *bp, char **name, char **header, unsigned char **data,
-	     long *len)
-	{
-	EVP_ENCODE_CTX ctx;
-	int end=0,i,k,bl=0,hl=0,nohead=0;
-	char buf[256];
-	BUF_MEM *nameB;
-	BUF_MEM *headerB;
-	BUF_MEM *dataB,*tmpB;
-	
-	nameB=BUF_MEM_new();
-	headerB=BUF_MEM_new();
-	dataB=BUF_MEM_new();
-	if ((nameB == NULL) || (headerB == NULL) || (dataB == NULL))
-		{
-		BUF_MEM_free(nameB);
-		BUF_MEM_free(headerB);
-		BUF_MEM_free(dataB);
-		PEMerr(PEM_F_PEM_READ_BIO,ERR_R_MALLOC_FAILURE);
-		return(0);
-		}
-
-	buf[254]='\0';
-	for (;;)
-		{
-		i=BIO_gets(bp,buf,254);
-
-		if (i <= 0)
-			{
-			PEMerr(PEM_F_PEM_READ_BIO,PEM_R_NO_START_LINE);
-			goto err;
-			}
-
-		while ((i >= 0) && (buf[i] <= ' ')) i--;
-		buf[++i]='\n'; buf[++i]='\0';
-
-		if (strncmp(buf,"-----BEGIN ",11) == 0)
-			{
-			i=strlen(&(buf[11]));
-
-			if (strncmp(&(buf[11+i-6]),"-----\n",6) != 0)
-				continue;
-			if (!BUF_MEM_grow(nameB,i+9))
-				{
-				PEMerr(PEM_F_PEM_READ_BIO,ERR_R_MALLOC_FAILURE);
-				goto err;
-				}
-			memcpy(nameB->data,&(buf[11]),i-6);
-			nameB->data[i-6]='\0';
-			break;
-			}
-		}
-	hl=0;
-	if (!BUF_MEM_grow(headerB,256))
-		{ PEMerr(PEM_F_PEM_READ_BIO,ERR_R_MALLOC_FAILURE); goto err; }
-	headerB->data[0]='\0';
-	for (;;)
-		{
-		i=BIO_gets(bp,buf,254);
-		if (i <= 0) break;
-
-		while ((i >= 0) && (buf[i] <= ' ')) i--;
-		buf[++i]='\n'; buf[++i]='\0';
-
-		if (buf[0] == '\n') break;
-		if (!BUF_MEM_grow(headerB,hl+i+9))
-			{ PEMerr(PEM_F_PEM_READ_BIO,ERR_R_MALLOC_FAILURE); goto err; }
-		if (strncmp(buf,"-----END ",9) == 0)
-			{
-			nohead=1;
-			break;
-			}
-		memcpy(&(headerB->data[hl]),buf,i);
-		headerB->data[hl+i]='\0';
-		hl+=i;
-		}
-
-	bl=0;
-	if (!BUF_MEM_grow(dataB,1024))
-		{ PEMerr(PEM_F_PEM_READ_BIO,ERR_R_MALLOC_FAILURE); goto err; }
-	dataB->data[0]='\0';
-	if (!nohead)
-		{
-		for (;;)
-			{
-			i=BIO_gets(bp,buf,254);
-			if (i <= 0) break;
-
-			while ((i >= 0) && (buf[i] <= ' ')) i--;
-			buf[++i]='\n'; buf[++i]='\0';
-
-			if (i != 65) end=1;
-			if (strncmp(buf,"-----END ",9) == 0)
-				break;
-			if (i > 65) break;
-			if (!BUF_MEM_grow_clean(dataB,i+bl+9))
-				{
-				PEMerr(PEM_F_PEM_READ_BIO,ERR_R_MALLOC_FAILURE);
-				goto err;
-				}
-			memcpy(&(dataB->data[bl]),buf,i);
-			dataB->data[bl+i]='\0';
-			bl+=i;
-			if (end)
-				{
-				buf[0]='\0';
-				i=BIO_gets(bp,buf,254);
-				if (i <= 0) break;
-
-				while ((i >= 0) && (buf[i] <= ' ')) i--;
-				buf[++i]='\n'; buf[++i]='\0';
-
-				break;
-				}
-			}
-		}
-	else
-		{
-		tmpB=headerB;
-		headerB=dataB;
-		dataB=tmpB;
-		bl=hl;
-		}
-	i=strlen(nameB->data);
-	if (	(strncmp(buf,"-----END ",9) != 0) ||
-		(strncmp(nameB->data,&(buf[9]),i) != 0) ||
-		(strncmp(&(buf[9+i]),"-----\n",6) != 0))
-		{
-		PEMerr(PEM_F_PEM_READ_BIO,PEM_R_BAD_END_LINE);
-		goto err;
-		}
-
-	EVP_DecodeInit(&ctx);
-	i=EVP_DecodeUpdate(&ctx,
-		(unsigned char *)dataB->data,&bl,
-		(unsigned char *)dataB->data,bl);
-	if (i < 0)
-		{
-		PEMerr(PEM_F_PEM_READ_BIO,PEM_R_BAD_BASE64_DECODE);
-		goto err;
-		}
-	i=EVP_DecodeFinal(&ctx,(unsigned char *)&(dataB->data[bl]),&k);
-	if (i < 0)
-		{
-		PEMerr(PEM_F_PEM_READ_BIO,PEM_R_BAD_BASE64_DECODE);
-		goto err;
-		}
-	bl+=k;
-
-	if (bl == 0) goto err;
-	*name=nameB->data;
-	*header=headerB->data;
-	*data=(unsigned char *)dataB->data;
-	*len=bl;
-	OPENSSL_free(nameB);
-	OPENSSL_free(headerB);
-	OPENSSL_free(dataB);
-	return(1);
-err:
-	BUF_MEM_free(nameB);
-	BUF_MEM_free(headerB);
-	BUF_MEM_free(dataB);
-	return(0);
-	}
diff --git a/crypto/openssl/crypto/pem/pem_oth.c b/crypto/openssl/crypto/pem/pem_oth.c
deleted file mode 100644
index b33868d25ac1..000000000000
--- a/crypto/openssl/crypto/pem/pem_oth.c
+++ /dev/null
@@ -1,86 +0,0 @@
-/* crypto/pem/pem_oth.c */
-/* Copyright (C) 1995-1998 Eric Young (eay@cryptsoft.com)
- * All rights reserved.
- *
- * This package is an SSL implementation written
- * by Eric Young (eay@cryptsoft.com).
- * The implementation was written so as to conform with Netscapes SSL.
- * 
- * This library is free for commercial and non-commercial use as long as
- * the following conditions are aheared to.  The following conditions
- * apply to all code found in this distribution, be it the RC4, RSA,
- * lhash, DES, etc., code; not just the SSL code.  The SSL documentation
- * included with this distribution is covered by the same copyright terms
- * except that the holder is Tim Hudson (tjh@cryptsoft.com).
- * 
- * Copyright remains Eric Young's, and as such any Copyright notices in
- * the code are not to be removed.
- * If this package is used in a product, Eric Young should be given attribution
- * as the author of the parts of the library used.
- * This can be in the form of a textual message at program startup or
- * in documentation (online or textual) provided with the package.
- * 
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions
- * are met:
- * 1. Redistributions of source code must retain the copyright
- *    notice, this list of conditions and the following disclaimer.
- * 2. Redistributions in binary form must reproduce the above copyright
- *    notice, this list of conditions and the following disclaimer in the
- *    documentation and/or other materials provided with the distribution.
- * 3. All advertising materials mentioning features or use of this software
- *    must display the following acknowledgement:
- *    "This product includes cryptographic software written by
- *     Eric Young (eay@cryptsoft.com)"
- *    The word 'cryptographic' can be left out if the rouines from the library
- *    being used are not cryptographic related :-).
- * 4. If you include any Windows specific code (or a derivative thereof) from 
- *    the apps directory (application code) you must include an acknowledgement:
- *    "This product includes software written by Tim Hudson (tjh@cryptsoft.com)"
- * 
- * THIS SOFTWARE IS PROVIDED BY ERIC YOUNG ``AS IS'' AND
- * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
- * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
- * ARE DISCLAIMED.  IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE
- * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
- * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
- * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
- * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
- * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
- * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
- * SUCH DAMAGE.
- * 
- * The licence and distribution terms for any publically available version or
- * derivative of this code cannot be changed.  i.e. this code cannot simply be
- * copied and put under another distribution licence
- * [including the GNU Public Licence.]
- */
-
-#include <stdio.h>
-#include "cryptlib.h"
-#include <openssl/buffer.h>
-#include <openssl/objects.h>
-#include <openssl/evp.h>
-#include <openssl/rand.h>
-#include <openssl/x509.h>
-#include <openssl/pem.h>
-
-/* Handle 'other' PEMs: not private keys */
-
-void *PEM_ASN1_read_bio(d2i_of_void *d2i, const char *name, BIO *bp, void **x,
-			pem_password_cb *cb, void *u)
-	{
-	const unsigned char *p=NULL;
-	unsigned char *data=NULL;
-	long len;
-	char *ret=NULL;
-
-	if (!PEM_bytes_read_bio(&data, &len, NULL, name, bp, cb, u))
-		return NULL;
-	p = data;
-	ret=d2i(x,&p,len);
-	if (ret == NULL)
-		PEMerr(PEM_F_PEM_ASN1_READ_BIO,ERR_R_ASN1_LIB);
-	OPENSSL_free(data);
-	return(ret);
-	}
diff --git a/crypto/openssl/crypto/pem/pem_pk8.c b/crypto/openssl/crypto/pem/pem_pk8.c
deleted file mode 100644
index 6deab8c33810..000000000000
--- a/crypto/openssl/crypto/pem/pem_pk8.c
+++ /dev/null
@@ -1,242 +0,0 @@
-/* crypto/pem/pem_pkey.c */
-/* Copyright (C) 1995-1998 Eric Young (eay@cryptsoft.com)
- * All rights reserved.
- *
- * This package is an SSL implementation written
- * by Eric Young (eay@cryptsoft.com).
- * The implementation was written so as to conform with Netscapes SSL.
- * 
- * This library is free for commercial and non-commercial use as long as
- * the following conditions are aheared to.  The following conditions
- * apply to all code found in this distribution, be it the RC4, RSA,
- * lhash, DES, etc., code; not just the SSL code.  The SSL documentation
- * included with this distribution is covered by the same copyright terms
- * except that the holder is Tim Hudson (tjh@cryptsoft.com).
- * 
- * Copyright remains Eric Young's, and as such any Copyright notices in
- * the code are not to be removed.
- * If this package is used in a product, Eric Young should be given attribution
- * as the author of the parts of the library used.
- * This can be in the form of a textual message at program startup or
- * in documentation (online or textual) provided with the package.
- * 
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions
- * are met:
- * 1. Redistributions of source code must retain the copyright
- *    notice, this list of conditions and the following disclaimer.
- * 2. Redistributions in binary form must reproduce the above copyright
- *    notice, this list of conditions and the following disclaimer in the
- *    documentation and/or other materials provided with the distribution.
- * 3. All advertising materials mentioning features or use of this software
- *    must display the following acknowledgement:
- *    "This product includes cryptographic software written by
- *     Eric Young (eay@cryptsoft.com)"
- *    The word 'cryptographic' can be left out if the rouines from the library
- *    being used are not cryptographic related :-).
- * 4. If you include any Windows specific code (or a derivative thereof) from 
- *    the apps directory (application code) you must include an acknowledgement:
- *    "This product includes software written by Tim Hudson (tjh@cryptsoft.com)"
- * 
- * THIS SOFTWARE IS PROVIDED BY ERIC YOUNG ``AS IS'' AND
- * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
- * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
- * ARE DISCLAIMED.  IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE
- * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
- * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
- * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
- * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
- * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
- * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
- * SUCH DAMAGE.
- * 
- * The licence and distribution terms for any publically available version or
- * derivative of this code cannot be changed.  i.e. this code cannot simply be
- * copied and put under another distribution licence
- * [including the GNU Public Licence.]
- */
-
-#include <stdio.h>
-#include "cryptlib.h"
-#include <openssl/buffer.h>
-#include <openssl/objects.h>
-#include <openssl/evp.h>
-#include <openssl/rand.h>
-#include <openssl/x509.h>
-#include <openssl/pkcs12.h>
-#include <openssl/pem.h>
-
-static int do_pk8pkey(BIO *bp, EVP_PKEY *x, int isder,
-				int nid, const EVP_CIPHER *enc,
-				char *kstr, int klen,
-				pem_password_cb *cb, void *u);
-static int do_pk8pkey_fp(FILE *bp, EVP_PKEY *x, int isder,
-				int nid, const EVP_CIPHER *enc,
-				char *kstr, int klen,
-				pem_password_cb *cb, void *u);
-
-/* These functions write a private key in PKCS#8 format: it is a "drop in"
- * replacement for PEM_write_bio_PrivateKey() and friends. As usual if 'enc'
- * is NULL then it uses the unencrypted private key form. The 'nid' versions
- * uses PKCS#5 v1.5 PBE algorithms whereas the others use PKCS#5 v2.0.
- */
-
-int PEM_write_bio_PKCS8PrivateKey_nid(BIO *bp, EVP_PKEY *x, int nid,
-				  char *kstr, int klen,
-				  pem_password_cb *cb, void *u)
-{
-	return do_pk8pkey(bp, x, 0, nid, NULL, kstr, klen, cb, u);
-}
-
-int PEM_write_bio_PKCS8PrivateKey(BIO *bp, EVP_PKEY *x, const EVP_CIPHER *enc,
-				  char *kstr, int klen,
-				  pem_password_cb *cb, void *u)
-{
-	return do_pk8pkey(bp, x, 0, -1, enc, kstr, klen, cb, u);
-}
-
-int i2d_PKCS8PrivateKey_bio(BIO *bp, EVP_PKEY *x, const EVP_CIPHER *enc,
-				  char *kstr, int klen,
-				  pem_password_cb *cb, void *u)
-{
-	return do_pk8pkey(bp, x, 1, -1, enc, kstr, klen, cb, u);
-}
-
-int i2d_PKCS8PrivateKey_nid_bio(BIO *bp, EVP_PKEY *x, int nid,
-				  char *kstr, int klen,
-				  pem_password_cb *cb, void *u)
-{
-	return do_pk8pkey(bp, x, 1, nid, NULL, kstr, klen, cb, u);
-}
-
-static int do_pk8pkey(BIO *bp, EVP_PKEY *x, int isder, int nid, const EVP_CIPHER *enc,
-				  char *kstr, int klen,
-				  pem_password_cb *cb, void *u)
-{
-	X509_SIG *p8;
-	PKCS8_PRIV_KEY_INFO *p8inf;
-	char buf[PEM_BUFSIZE];
-	int ret;
-	if(!(p8inf = EVP_PKEY2PKCS8(x))) {
-		PEMerr(PEM_F_DO_PK8PKEY,
-					PEM_R_ERROR_CONVERTING_PRIVATE_KEY);
-		return 0;
-	}
-	if(enc || (nid != -1)) {
-		if(!kstr) {
-			if(!cb) klen = PEM_def_callback(buf, PEM_BUFSIZE, 1, u);
-			else klen = cb(buf, PEM_BUFSIZE, 1, u);
-			if(klen <= 0) {
-				PEMerr(PEM_F_DO_PK8PKEY,PEM_R_READ_KEY);
-				PKCS8_PRIV_KEY_INFO_free(p8inf);
-				return 0;
-			}
-				
-			kstr = buf;
-		}
-		p8 = PKCS8_encrypt(nid, enc, kstr, klen, NULL, 0, 0, p8inf);
-		if(kstr == buf) OPENSSL_cleanse(buf, klen);
-		PKCS8_PRIV_KEY_INFO_free(p8inf);
-		if(isder) ret = i2d_PKCS8_bio(bp, p8);
-		else ret = PEM_write_bio_PKCS8(bp, p8);
-		X509_SIG_free(p8);
-		return ret;
-	} else {
-		if(isder) ret = i2d_PKCS8_PRIV_KEY_INFO_bio(bp, p8inf);
-		else ret = PEM_write_bio_PKCS8_PRIV_KEY_INFO(bp, p8inf);
-		PKCS8_PRIV_KEY_INFO_free(p8inf);
-		return ret;
-	}
-}
-
-EVP_PKEY *d2i_PKCS8PrivateKey_bio(BIO *bp, EVP_PKEY **x, pem_password_cb *cb, void *u)
-{
-	PKCS8_PRIV_KEY_INFO *p8inf = NULL;
-	X509_SIG *p8 = NULL;
-	int klen;
-	EVP_PKEY *ret;
-	char psbuf[PEM_BUFSIZE];
-	p8 = d2i_PKCS8_bio(bp, NULL);
-	if(!p8) return NULL;
-	if (cb) klen=cb(psbuf,PEM_BUFSIZE,0,u);
-	else klen=PEM_def_callback(psbuf,PEM_BUFSIZE,0,u);
-	if (klen <= 0) {
-		PEMerr(PEM_F_D2I_PKCS8PRIVATEKEY_BIO, PEM_R_BAD_PASSWORD_READ);
-		X509_SIG_free(p8);
-		return NULL;	
-	}
-	p8inf = PKCS8_decrypt(p8, psbuf, klen);
-	X509_SIG_free(p8);
-	if(!p8inf) return NULL;
-	ret = EVP_PKCS82PKEY(p8inf);
-	PKCS8_PRIV_KEY_INFO_free(p8inf);
-	if(!ret) return NULL;
-	if(x) {
-		if(*x) EVP_PKEY_free(*x);
-		*x = ret;
-	}
-	return ret;
-}
-
-#ifndef OPENSSL_NO_FP_API
-
-int i2d_PKCS8PrivateKey_fp(FILE *fp, EVP_PKEY *x, const EVP_CIPHER *enc,
-				  char *kstr, int klen,
-				  pem_password_cb *cb, void *u)
-{
-	return do_pk8pkey_fp(fp, x, 1, -1, enc, kstr, klen, cb, u);
-}
-
-int i2d_PKCS8PrivateKey_nid_fp(FILE *fp, EVP_PKEY *x, int nid,
-				  char *kstr, int klen,
-				  pem_password_cb *cb, void *u)
-{
-	return do_pk8pkey_fp(fp, x, 1, nid, NULL, kstr, klen, cb, u);
-}
-
-int PEM_write_PKCS8PrivateKey_nid(FILE *fp, EVP_PKEY *x, int nid,
-				  char *kstr, int klen,
-				  pem_password_cb *cb, void *u)
-{
-	return do_pk8pkey_fp(fp, x, 0, nid, NULL, kstr, klen, cb, u);
-}
-
-int PEM_write_PKCS8PrivateKey(FILE *fp, EVP_PKEY *x, const EVP_CIPHER *enc,
-			      char *kstr, int klen, pem_password_cb *cb, void *u)
-{
-	return do_pk8pkey_fp(fp, x, 0, -1, enc, kstr, klen, cb, u);
-}
-
-static int do_pk8pkey_fp(FILE *fp, EVP_PKEY *x, int isder, int nid, const EVP_CIPHER *enc,
-				  char *kstr, int klen,
-				  pem_password_cb *cb, void *u)
-{
-	BIO *bp;
-	int ret;
-	if(!(bp = BIO_new_fp(fp, BIO_NOCLOSE))) {
-		PEMerr(PEM_F_DO_PK8PKEY_FP,ERR_R_BUF_LIB);
-                return(0);
-	}
-	ret = do_pk8pkey(bp, x, isder, nid, enc, kstr, klen, cb, u);
-	BIO_free(bp);
-	return ret;
-}
-
-EVP_PKEY *d2i_PKCS8PrivateKey_fp(FILE *fp, EVP_PKEY **x, pem_password_cb *cb, void *u)
-{
-	BIO *bp;
-	EVP_PKEY *ret;
-	if(!(bp = BIO_new_fp(fp, BIO_NOCLOSE))) {
-		PEMerr(PEM_F_D2I_PKCS8PRIVATEKEY_FP,ERR_R_BUF_LIB);
-                return NULL;
-	}
-	ret = d2i_PKCS8PrivateKey_bio(bp, x, cb, u);
-	BIO_free(bp);
-	return ret;
-}
-
-#endif
-
-IMPLEMENT_PEM_rw(PKCS8, X509_SIG, PEM_STRING_PKCS8, X509_SIG)
-IMPLEMENT_PEM_rw(PKCS8_PRIV_KEY_INFO, PKCS8_PRIV_KEY_INFO, PEM_STRING_PKCS8INF,
-							 PKCS8_PRIV_KEY_INFO)
diff --git a/crypto/openssl/crypto/pem/pem_pkey.c b/crypto/openssl/crypto/pem/pem_pkey.c
deleted file mode 100644
index 4da4c31ce5fa..000000000000
--- a/crypto/openssl/crypto/pem/pem_pkey.c
+++ /dev/null
@@ -1,149 +0,0 @@
-/* crypto/pem/pem_pkey.c */
-/* Copyright (C) 1995-1998 Eric Young (eay@cryptsoft.com)
- * All rights reserved.
- *
- * This package is an SSL implementation written
- * by Eric Young (eay@cryptsoft.com).
- * The implementation was written so as to conform with Netscapes SSL.
- * 
- * This library is free for commercial and non-commercial use as long as
- * the following conditions are aheared to.  The following conditions
- * apply to all code found in this distribution, be it the RC4, RSA,
- * lhash, DES, etc., code; not just the SSL code.  The SSL documentation
- * included with this distribution is covered by the same copyright terms
- * except that the holder is Tim Hudson (tjh@cryptsoft.com).
- * 
- * Copyright remains Eric Young's, and as such any Copyright notices in
- * the code are not to be removed.
- * If this package is used in a product, Eric Young should be given attribution
- * as the author of the parts of the library used.
- * This can be in the form of a textual message at program startup or
- * in documentation (online or textual) provided with the package.
- * 
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions
- * are met:
- * 1. Redistributions of source code must retain the copyright
- *    notice, this list of conditions and the following disclaimer.
- * 2. Redistributions in binary form must reproduce the above copyright
- *    notice, this list of conditions and the following disclaimer in the
- *    documentation and/or other materials provided with the distribution.
- * 3. All advertising materials mentioning features or use of this software
- *    must display the following acknowledgement:
- *    "This product includes cryptographic software written by
- *     Eric Young (eay@cryptsoft.com)"
- *    The word 'cryptographic' can be left out if the rouines from the library
- *    being used are not cryptographic related :-).
- * 4. If you include any Windows specific code (or a derivative thereof) from 
- *    the apps directory (application code) you must include an acknowledgement:
- *    "This product includes software written by Tim Hudson (tjh@cryptsoft.com)"
- * 
- * THIS SOFTWARE IS PROVIDED BY ERIC YOUNG ``AS IS'' AND
- * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
- * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
- * ARE DISCLAIMED.  IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE
- * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
- * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
- * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
- * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
- * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
- * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
- * SUCH DAMAGE.
- * 
- * The licence and distribution terms for any publically available version or
- * derivative of this code cannot be changed.  i.e. this code cannot simply be
- * copied and put under another distribution licence
- * [including the GNU Public Licence.]
- */
-
-#include <stdio.h>
-#include "cryptlib.h"
-#include <openssl/buffer.h>
-#include <openssl/objects.h>
-#include <openssl/evp.h>
-#include <openssl/rand.h>
-#include <openssl/x509.h>
-#include <openssl/pkcs12.h>
-#include <openssl/pem.h>
-
-
-EVP_PKEY *PEM_read_bio_PrivateKey(BIO *bp, EVP_PKEY **x, pem_password_cb *cb, void *u)
-	{
-	char *nm=NULL;
-	const unsigned char *p=NULL;
-	unsigned char *data=NULL;
-	long len;
-	EVP_PKEY *ret=NULL;
-
-	if (!PEM_bytes_read_bio(&data, &len, &nm, PEM_STRING_EVP_PKEY, bp, cb, u))
-		return NULL;
-	p = data;
-
-	if (strcmp(nm,PEM_STRING_RSA) == 0)
-		ret=d2i_PrivateKey(EVP_PKEY_RSA,x,&p,len);
-	else if (strcmp(nm,PEM_STRING_DSA) == 0)
-		ret=d2i_PrivateKey(EVP_PKEY_DSA,x,&p,len);
-	else if (strcmp(nm,PEM_STRING_ECPRIVATEKEY) == 0)
-		ret=d2i_PrivateKey(EVP_PKEY_EC,x,&p,len);
-	else if (strcmp(nm,PEM_STRING_PKCS8INF) == 0) {
-		PKCS8_PRIV_KEY_INFO *p8inf;
-		p8inf=d2i_PKCS8_PRIV_KEY_INFO(NULL, &p, len);
-		if(!p8inf) goto p8err;
-		ret = EVP_PKCS82PKEY(p8inf);
-		if(x) {
-			if(*x) EVP_PKEY_free((EVP_PKEY *)*x);
-			*x = ret;
-		}
-		PKCS8_PRIV_KEY_INFO_free(p8inf);
-	} else if (strcmp(nm,PEM_STRING_PKCS8) == 0) {
-		PKCS8_PRIV_KEY_INFO *p8inf;
-		X509_SIG *p8;
-		int klen;
-		char psbuf[PEM_BUFSIZE];
-		p8 = d2i_X509_SIG(NULL, &p, len);
-		if(!p8) goto p8err;
-		if (cb) klen=cb(psbuf,PEM_BUFSIZE,0,u);
-		else klen=PEM_def_callback(psbuf,PEM_BUFSIZE,0,u);
-		if (klen <= 0) {
-			PEMerr(PEM_F_PEM_READ_BIO_PRIVATEKEY,
-					PEM_R_BAD_PASSWORD_READ);
-			X509_SIG_free(p8);
-			goto err;
-		}
-		p8inf = PKCS8_decrypt(p8, psbuf, klen);
-		X509_SIG_free(p8);
-		if(!p8inf) goto p8err;
-		ret = EVP_PKCS82PKEY(p8inf);
-		if(x) {
-			if(*x) EVP_PKEY_free((EVP_PKEY *)*x);
-			*x = ret;
-		}
-		PKCS8_PRIV_KEY_INFO_free(p8inf);
-	}
-p8err:
-	if (ret == NULL)
-		PEMerr(PEM_F_PEM_READ_BIO_PRIVATEKEY,ERR_R_ASN1_LIB);
-err:
-	OPENSSL_free(nm);
-	OPENSSL_cleanse(data, len);
-	OPENSSL_free(data);
-	return(ret);
-	}
-
-#ifndef OPENSSL_NO_FP_API
-EVP_PKEY *PEM_read_PrivateKey(FILE *fp, EVP_PKEY **x, pem_password_cb *cb, void *u)
-	{
-        BIO *b;
-        EVP_PKEY *ret;
-
-        if ((b=BIO_new(BIO_s_file())) == NULL)
-		{
-		PEMerr(PEM_F_PEM_READ_PRIVATEKEY,ERR_R_BUF_LIB);
-                return(0);
-		}
-        BIO_set_fp(b,fp,BIO_NOCLOSE);
-        ret=PEM_read_bio_PrivateKey(b,x,cb,u);
-        BIO_free(b);
-        return(ret);
-	}
-#endif
diff --git a/crypto/openssl/crypto/pem/pem_seal.c b/crypto/openssl/crypto/pem/pem_seal.c
deleted file mode 100644
index 4e554e5481e0..000000000000
--- a/crypto/openssl/crypto/pem/pem_seal.c
+++ /dev/null
@@ -1,189 +0,0 @@
-/* crypto/pem/pem_seal.c */
-/* Copyright (C) 1995-1998 Eric Young (eay@cryptsoft.com)
- * All rights reserved.
- *
- * This package is an SSL implementation written
- * by Eric Young (eay@cryptsoft.com).
- * The implementation was written so as to conform with Netscapes SSL.
- * 
- * This library is free for commercial and non-commercial use as long as
- * the following conditions are aheared to.  The following conditions
- * apply to all code found in this distribution, be it the RC4, RSA,
- * lhash, DES, etc., code; not just the SSL code.  The SSL documentation
- * included with this distribution is covered by the same copyright terms
- * except that the holder is Tim Hudson (tjh@cryptsoft.com).
- * 
- * Copyright remains Eric Young's, and as such any Copyright notices in
- * the code are not to be removed.
- * If this package is used in a product, Eric Young should be given attribution
- * as the author of the parts of the library used.
- * This can be in the form of a textual message at program startup or
- * in documentation (online or textual) provided with the package.
- * 
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions
- * are met:
- * 1. Redistributions of source code must retain the copyright
- *    notice, this list of conditions and the following disclaimer.
- * 2. Redistributions in binary form must reproduce the above copyright
- *    notice, this list of conditions and the following disclaimer in the
- *    documentation and/or other materials provided with the distribution.
- * 3. All advertising materials mentioning features or use of this software
- *    must display the following acknowledgement:
- *    "This product includes cryptographic software written by
- *     Eric Young (eay@cryptsoft.com)"
- *    The word 'cryptographic' can be left out if the rouines from the library
- *    being used are not cryptographic related :-).
- * 4. If you include any Windows specific code (or a derivative thereof) from 
- *    the apps directory (application code) you must include an acknowledgement:
- *    "This product includes software written by Tim Hudson (tjh@cryptsoft.com)"
- * 
- * THIS SOFTWARE IS PROVIDED BY ERIC YOUNG ``AS IS'' AND
- * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
- * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
- * ARE DISCLAIMED.  IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE
- * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
- * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
- * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
- * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
- * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
- * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
- * SUCH DAMAGE.
- * 
- * The licence and distribution terms for any publically available version or
- * derivative of this code cannot be changed.  i.e. this code cannot simply be
- * copied and put under another distribution licence
- * [including the GNU Public Licence.]
- */
-
-#include <openssl/opensslconf.h>	/* for OPENSSL_NO_RSA */
-#ifndef OPENSSL_NO_RSA
-#include <stdio.h>
-#include "cryptlib.h"
-#include <openssl/evp.h>
-#include <openssl/rand.h>
-#include <openssl/objects.h>
-#include <openssl/x509.h>
-#include <openssl/pem.h>
-#include <openssl/rsa.h>
-
-int PEM_SealInit(PEM_ENCODE_SEAL_CTX *ctx, EVP_CIPHER *type, EVP_MD *md_type,
-	     unsigned char **ek, int *ekl, unsigned char *iv, EVP_PKEY **pubk,
-	     int npubk)
-	{
-	unsigned char key[EVP_MAX_KEY_LENGTH];
-	int ret= -1;
-	int i,j,max=0;
-	char *s=NULL;
-
-	for (i=0; i<npubk; i++)
-		{
-		if (pubk[i]->type != EVP_PKEY_RSA)
-			{
-			PEMerr(PEM_F_PEM_SEALINIT,PEM_R_PUBLIC_KEY_NO_RSA);
-			goto err;
-			}
-		j=RSA_size(pubk[i]->pkey.rsa);
-		if (j > max) max=j;
-		}
-	s=(char *)OPENSSL_malloc(max*2);
-	if (s == NULL)
-		{
-		PEMerr(PEM_F_PEM_SEALINIT,ERR_R_MALLOC_FAILURE);
-		goto err;
-		}
-
-	EVP_EncodeInit(&ctx->encode);
-
-	EVP_MD_CTX_init(&ctx->md);
-	EVP_SignInit(&ctx->md,md_type);
-
-	EVP_CIPHER_CTX_init(&ctx->cipher);
-	ret=EVP_SealInit(&ctx->cipher,type,ek,ekl,iv,pubk,npubk);
-	if (!ret) goto err;
-
-	/* base64 encode the keys */
-	for (i=0; i<npubk; i++)
-		{
-		j=EVP_EncodeBlock((unsigned char *)s,ek[i],
-			RSA_size(pubk[i]->pkey.rsa));
-		ekl[i]=j;
-		memcpy(ek[i],s,j+1);
-		}
-
-	ret=npubk;
-err:
-	if (s != NULL) OPENSSL_free(s);
-	OPENSSL_cleanse(key,EVP_MAX_KEY_LENGTH);
-	return(ret);
-	}
-
-void PEM_SealUpdate(PEM_ENCODE_SEAL_CTX *ctx, unsigned char *out, int *outl,
-	     unsigned char *in, int inl)
-	{
-	unsigned char buffer[1600];
-	int i,j;
-
-	*outl=0;
-	EVP_SignUpdate(&ctx->md,in,inl);
-	for (;;)
-		{
-		if (inl <= 0) break;
-		if (inl > 1200)
-			i=1200;
-		else
-			i=inl;
-		EVP_EncryptUpdate(&ctx->cipher,buffer,&j,in,i);
-		EVP_EncodeUpdate(&ctx->encode,out,&j,buffer,j);
-		*outl+=j;
-		out+=j;
-		in+=i;
-		inl-=i;
-		}
-	}
-
-int PEM_SealFinal(PEM_ENCODE_SEAL_CTX *ctx, unsigned char *sig, int *sigl,
-	     unsigned char *out, int *outl, EVP_PKEY *priv)
-	{
-	unsigned char *s=NULL;
-	int ret=0,j;
-	unsigned int i;
-
-	if (priv->type != EVP_PKEY_RSA)
-		{
-		PEMerr(PEM_F_PEM_SEALFINAL,PEM_R_PUBLIC_KEY_NO_RSA);
-		goto err;
-		}
-	i=RSA_size(priv->pkey.rsa);
-	if (i < 100) i=100;
-	s=(unsigned char *)OPENSSL_malloc(i*2);
-	if (s == NULL)
-		{
-		PEMerr(PEM_F_PEM_SEALFINAL,ERR_R_MALLOC_FAILURE);
-		goto err;
-		}
-
-	EVP_EncryptFinal_ex(&ctx->cipher,s,(int *)&i);
-	EVP_EncodeUpdate(&ctx->encode,out,&j,s,i);
-	*outl=j;
-	out+=j;
-	EVP_EncodeFinal(&ctx->encode,out,&j);
-	*outl+=j;
-
-	if (!EVP_SignFinal(&ctx->md,s,&i,priv)) goto err;
-	*sigl=EVP_EncodeBlock(sig,s,i);
-
-	ret=1;
-err:
-	EVP_MD_CTX_cleanup(&ctx->md);
-	EVP_CIPHER_CTX_cleanup(&ctx->cipher);
-	if (s != NULL) OPENSSL_free(s);
-	return(ret);
-	}
-#else /* !OPENSSL_NO_RSA */
-
-# if PEDANTIC
-static void *dummy=&dummy;
-# endif
-
-#endif
diff --git a/crypto/openssl/crypto/pem/pem_sign.c b/crypto/openssl/crypto/pem/pem_sign.c
deleted file mode 100644
index c3b9808cb204..000000000000
--- a/crypto/openssl/crypto/pem/pem_sign.c
+++ /dev/null
@@ -1,102 +0,0 @@
-/* crypto/pem/pem_sign.c */
-/* Copyright (C) 1995-1998 Eric Young (eay@cryptsoft.com)
- * All rights reserved.
- *
- * This package is an SSL implementation written
- * by Eric Young (eay@cryptsoft.com).
- * The implementation was written so as to conform with Netscapes SSL.
- * 
- * This library is free for commercial and non-commercial use as long as
- * the following conditions are aheared to.  The following conditions
- * apply to all code found in this distribution, be it the RC4, RSA,
- * lhash, DES, etc., code; not just the SSL code.  The SSL documentation
- * included with this distribution is covered by the same copyright terms
- * except that the holder is Tim Hudson (tjh@cryptsoft.com).
- * 
- * Copyright remains Eric Young's, and as such any Copyright notices in
- * the code are not to be removed.
- * If this package is used in a product, Eric Young should be given attribution
- * as the author of the parts of the library used.
- * This can be in the form of a textual message at program startup or
- * in documentation (online or textual) provided with the package.
- * 
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions
- * are met:
- * 1. Redistributions of source code must retain the copyright
- *    notice, this list of conditions and the following disclaimer.
- * 2. Redistributions in binary form must reproduce the above copyright
- *    notice, this list of conditions and the following disclaimer in the
- *    documentation and/or other materials provided with the distribution.
- * 3. All advertising materials mentioning features or use of this software
- *    must display the following acknowledgement:
- *    "This product includes cryptographic software written by
- *     Eric Young (eay@cryptsoft.com)"
- *    The word 'cryptographic' can be left out if the rouines from the library
- *    being used are not cryptographic related :-).
- * 4. If you include any Windows specific code (or a derivative thereof) from 
- *    the apps directory (application code) you must include an acknowledgement:
- *    "This product includes software written by Tim Hudson (tjh@cryptsoft.com)"
- * 
- * THIS SOFTWARE IS PROVIDED BY ERIC YOUNG ``AS IS'' AND
- * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
- * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
- * ARE DISCLAIMED.  IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE
- * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
- * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
- * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
- * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
- * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
- * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
- * SUCH DAMAGE.
- * 
- * The licence and distribution terms for any publically available version or
- * derivative of this code cannot be changed.  i.e. this code cannot simply be
- * copied and put under another distribution licence
- * [including the GNU Public Licence.]
- */
-
-#include <stdio.h>
-#include "cryptlib.h"
-#include <openssl/rand.h>
-#include <openssl/evp.h>
-#include <openssl/objects.h>
-#include <openssl/x509.h>
-#include <openssl/pem.h>
-
-void PEM_SignInit(EVP_MD_CTX *ctx, EVP_MD *type)
-	{
-	EVP_DigestInit_ex(ctx, type, NULL);
-	}
-
-void PEM_SignUpdate(EVP_MD_CTX *ctx, unsigned char *data,
-	     unsigned int count)
-	{
-	EVP_DigestUpdate(ctx,data,count);
-	}
-
-int PEM_SignFinal(EVP_MD_CTX *ctx, unsigned char *sigret, unsigned int *siglen,
-	     EVP_PKEY *pkey)
-	{
-	unsigned char *m;
-	int i,ret=0;
-	unsigned int m_len;
-
-	m=(unsigned char *)OPENSSL_malloc(EVP_PKEY_size(pkey)+2);
-	if (m == NULL)
-		{
-		PEMerr(PEM_F_PEM_SIGNFINAL,ERR_R_MALLOC_FAILURE);
-		goto err;
-		}
-
-	if (EVP_SignFinal(ctx,m,&m_len,pkey) <= 0) goto err;
-
-	i=EVP_EncodeBlock(sigret,m,m_len);
-	*siglen=i;
-	ret=1;
-err:
-	/* ctx has been zeroed by EVP_SignFinal() */
-	if (m != NULL) OPENSSL_free(m);
-	return(ret);
-	}
-
diff --git a/crypto/openssl/crypto/pem/pem_x509.c b/crypto/openssl/crypto/pem/pem_x509.c
deleted file mode 100644
index 19f88d8d3a60..000000000000
--- a/crypto/openssl/crypto/pem/pem_x509.c
+++ /dev/null
@@ -1,69 +0,0 @@
-/* pem_x509.c */
-/* Written by Dr Stephen N Henson (shenson@bigfoot.com) for the OpenSSL
- * project 2001.
- */
-/* ====================================================================
- * Copyright (c) 2001 The OpenSSL Project.  All rights reserved.
- *
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions
- * are met:
- *
- * 1. Redistributions of source code must retain the above copyright
- *    notice, this list of conditions and the following disclaimer. 
- *
- * 2. Redistributions in binary form must reproduce the above copyright
- *    notice, this list of conditions and the following disclaimer in
- *    the documentation and/or other materials provided with the
- *    distribution.
- *
- * 3. All advertising materials mentioning features or use of this
- *    software must display the following acknowledgment:
- *    "This product includes software developed by the OpenSSL Project
- *    for use in the OpenSSL Toolkit. (http://www.OpenSSL.org/)"
- *
- * 4. The names "OpenSSL Toolkit" and "OpenSSL Project" must not be used to
- *    endorse or promote products derived from this software without
- *    prior written permission. For written permission, please contact
- *    licensing@OpenSSL.org.
- *
- * 5. Products derived from this software may not be called "OpenSSL"
- *    nor may "OpenSSL" appear in their names without prior written
- *    permission of the OpenSSL Project.
- *
- * 6. Redistributions of any form whatsoever must retain the following
- *    acknowledgment:
- *    "This product includes software developed by the OpenSSL Project
- *    for use in the OpenSSL Toolkit (http://www.OpenSSL.org/)"
- *
- * THIS SOFTWARE IS PROVIDED BY THE OpenSSL PROJECT ``AS IS'' AND ANY
- * EXPRESSED OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
- * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR
- * PURPOSE ARE DISCLAIMED.  IN NO EVENT SHALL THE OpenSSL PROJECT OR
- * ITS CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
- * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
- * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
- * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
- * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
- * STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
- * ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED
- * OF THE POSSIBILITY OF SUCH DAMAGE.
- * ====================================================================
- *
- * This product includes cryptographic software written by Eric Young
- * (eay@cryptsoft.com).  This product includes software written by Tim
- * Hudson (tjh@cryptsoft.com).
- *
- */
-
-#include <stdio.h>
-#undef SSLEAY_MACROS
-#include "cryptlib.h"
-#include <openssl/bio.h>
-#include <openssl/evp.h>
-#include <openssl/x509.h>
-#include <openssl/pkcs7.h>
-#include <openssl/pem.h>
-
-IMPLEMENT_PEM_rw(X509, X509, PEM_STRING_X509, X509)
-
diff --git a/crypto/openssl/crypto/pem/pem_xaux.c b/crypto/openssl/crypto/pem/pem_xaux.c
deleted file mode 100644
index 63ce660cf1a2..000000000000
--- a/crypto/openssl/crypto/pem/pem_xaux.c
+++ /dev/null
@@ -1,69 +0,0 @@
-/* pem_xaux.c */
-/* Written by Dr Stephen N Henson (shenson@bigfoot.com) for the OpenSSL
- * project 2001.
- */
-/* ====================================================================
- * Copyright (c) 2001 The OpenSSL Project.  All rights reserved.
- *
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions
- * are met:
- *
- * 1. Redistributions of source code must retain the above copyright
- *    notice, this list of conditions and the following disclaimer. 
- *
- * 2. Redistributions in binary form must reproduce the above copyright
- *    notice, this list of conditions and the following disclaimer in
- *    the documentation and/or other materials provided with the
- *    distribution.
- *
- * 3. All advertising materials mentioning features or use of this
- *    software must display the following acknowledgment:
- *    "This product includes software developed by the OpenSSL Project
- *    for use in the OpenSSL Toolkit. (http://www.OpenSSL.org/)"
- *
- * 4. The names "OpenSSL Toolkit" and "OpenSSL Project" must not be used to
- *    endorse or promote products derived from this software without
- *    prior written permission. For written permission, please contact
- *    licensing@OpenSSL.org.
- *
- * 5. Products derived from this software may not be called "OpenSSL"
- *    nor may "OpenSSL" appear in their names without prior written
- *    permission of the OpenSSL Project.
- *
- * 6. Redistributions of any form whatsoever must retain the following
- *    acknowledgment:
- *    "This product includes software developed by the OpenSSL Project
- *    for use in the OpenSSL Toolkit (http://www.OpenSSL.org/)"
- *
- * THIS SOFTWARE IS PROVIDED BY THE OpenSSL PROJECT ``AS IS'' AND ANY
- * EXPRESSED OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
- * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR
- * PURPOSE ARE DISCLAIMED.  IN NO EVENT SHALL THE OpenSSL PROJECT OR
- * ITS CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
- * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
- * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
- * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
- * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
- * STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
- * ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED
- * OF THE POSSIBILITY OF SUCH DAMAGE.
- * ====================================================================
- *
- * This product includes cryptographic software written by Eric Young
- * (eay@cryptsoft.com).  This product includes software written by Tim
- * Hudson (tjh@cryptsoft.com).
- *
- */
-
-#include <stdio.h>
-#undef SSLEAY_MACROS
-#include "cryptlib.h"
-#include <openssl/bio.h>
-#include <openssl/evp.h>
-#include <openssl/x509.h>
-#include <openssl/pkcs7.h>
-#include <openssl/pem.h>
-
-IMPLEMENT_PEM_rw(X509_AUX, X509, PEM_STRING_X509_TRUSTED, X509_AUX)
-IMPLEMENT_PEM_rw(X509_CERT_PAIR, X509_CERT_PAIR, PEM_STRING_X509_PAIR, X509_CERT_PAIR)
diff --git a/crypto/openssl/crypto/pem/pkcs7.lis b/crypto/openssl/crypto/pem/pkcs7.lis
deleted file mode 100644
index be90c5d87f5b..000000000000
--- a/crypto/openssl/crypto/pem/pkcs7.lis
+++ /dev/null
@@ -1,22 +0,0 @@
-21     0:d=0 hl=2 l=  0 cons: univ: SEQUENCE          
- 00     2:d=0 hl=2 l=  9 prim: univ: OBJECT_IDENTIFIER :pkcs-7-signedData
- 21    13:d=0 hl=2 l=  0 cons: cont: 00			# explicit tag
-  21    15:d=0 hl=2 l=  0 cons: univ: SEQUENCE          
-   00    17:d=0 hl=2 l=  1 prim: univ: INTEGER          # version 
-   20    20:d=0 hl=2 l=  0 cons: univ: SET               
-   21    22:d=0 hl=2 l=  0 cons: univ: SEQUENCE          
-    00    24:d=0 hl=2 l=  9 prim: univ: OBJECT_IDENTIFIER :pkcs-7-data
-    00    35:d=0 hl=2 l=  0 prim: univ: EOC               
-   21    37:d=0 hl=2 l=  0 cons: cont: 00               # cert tag
-    20    39:d=0 hl=4 l=545 cons: univ: SEQUENCE          
-    20   588:d=0 hl=4 l=524 cons: univ: SEQUENCE          
-    00  1116:d=0 hl=2 l=  0 prim: univ: EOC               
-   21  1118:d=0 hl=2 l=  0 cons: cont: 01		# crl tag
-    20  1120:d=0 hl=4 l=653 cons: univ: SEQUENCE          
-    20  1777:d=0 hl=4 l=285 cons: univ: SEQUENCE          
-    00  2066:d=0 hl=2 l=  0 prim: univ: EOC               
-   21  2068:d=0 hl=2 l=  0 cons: univ: SET              # signers 
-    00  2070:d=0 hl=2 l=  0 prim: univ: EOC               
-  00  2072:d=0 hl=2 l=  0 prim: univ: EOC               
- 00  2074:d=0 hl=2 l=  0 prim: univ: EOC               
-00  2076:d=0 hl=2 l=  0 prim: univ: EOC               
diff --git a/crypto/openssl/crypto/perlasm/alpha.pl b/crypto/openssl/crypto/perlasm/alpha.pl
deleted file mode 100644
index 3dac571743c4..000000000000
--- a/crypto/openssl/crypto/perlasm/alpha.pl
+++ /dev/null
@@ -1,434 +0,0 @@
-#!/usr/local/bin/perl
-
-package alpha;
-use Carp qw(croak cluck);
-
-$label="100";
-
-$n_debug=0;
-$smear_regs=1;
-$reg_alloc=1;
-
-$align="3";
-$com_start="#";
-
-sub main'asm_init_output { @out=(); }
-sub main'asm_get_output { return(@out); }
-sub main'get_labels { return(@labels); }
-sub main'external_label { push(@labels,@_); }
-
-# General registers
-
-%regs=(	'r0',	'$0',
-	'r1',	'$1',
-	'r2',	'$2',
-	'r3',	'$3',
-	'r4',	'$4',
-	'r5',	'$5',
-	'r6',	'$6',
-	'r7',	'$7',
-	'r8',	'$8',
-	'r9',	'$22',
-	'r10',	'$23',
-	'r11',	'$24',
-	'r12',	'$25',
-	'r13',	'$27',
-	'r14',	'$28',
-	'r15',	'$21', # argc == 5
-	'r16',	'$20', # argc == 4
-	'r17',	'$19', # argc == 3
-	'r18',	'$18', # argc == 2
-	'r19',	'$17', # argc == 1
-	'r20',	'$16', # argc == 0
-	'r21',	'$9',  # save 0
-	'r22',	'$10', # save 1
-	'r23',	'$11', # save 2
-	'r24',	'$12', # save 3
-	'r25',	'$13', # save 4
-	'r26',	'$14', # save 5
-
-	'a0',	'$16',
-	'a1',	'$17',
-	'a2',	'$18',
-	'a3',	'$19',
-	'a4',	'$20',
-	'a5',	'$21',
-
-	's0',	'$9',
-	's1',	'$10',
-	's2',	'$11',
-	's3',	'$12',
-	's4',	'$13',
-	's5',	'$14',
-	'zero',	'$31',
-	'sp',	'$30',
-	);
-
-$main'reg_s0="r21";
-$main'reg_s1="r22";
-$main'reg_s2="r23";
-$main'reg_s3="r24";
-$main'reg_s4="r25";
-$main'reg_s5="r26";
-
-@reg=(  '$0', '$1' ,'$2' ,'$3' ,'$4' ,'$5' ,'$6' ,'$7' ,'$8',
-	'$22','$23','$24','$25','$20','$21','$27','$28');
-
-
-sub main'sub	{ &out3("subq",@_); }
-sub main'add	{ &out3("addq",@_); }
-sub main'mov	{ &out3("bis",$_[0],$_[0],$_[1]); }
-sub main'or	{ &out3("bis",@_); }
-sub main'bis	{ &out3("bis",@_); }
-sub main'br	{ &out1("br",@_); }
-sub main'ld	{ &out2("ldq",@_); }
-sub main'st	{ &out2("stq",@_); }
-sub main'cmpult	{ &out3("cmpult",@_); }
-sub main'cmplt	{ &out3("cmplt",@_); }
-sub main'bgt	{ &out2("bgt",@_); }
-sub main'ble	{ &out2("ble",@_); }
-sub main'blt	{ &out2("blt",@_); }
-sub main'mul	{ &out3("mulq",@_); }
-sub main'muh	{ &out3("umulh",@_); }
-
-$main'QWS=8;
-
-sub main'asm_add
-	{
-	push(@out,@_);
-	}
-
-sub main'asm_finish
-	{
-	&main'file_end();
-	print &main'asm_get_output();
-	}
-
-sub main'asm_init
-	{
-	($type,$fn)=@_;
-	$filename=$fn;
-
-	&main'asm_init_output();
-	&main'comment("Don't even think of reading this code");
-	&main'comment("It was automatically generated by $filename");
-	&main'comment("Which is a perl program used to generate the alpha assember.");
-	&main'comment("eric <eay\@cryptsoft.com>");
-	&main'comment("");
-
-	$filename =~ s/\.pl$//;
-	&main'file($filename);
-	}
-
-sub conv
-	{
-	local($r)=@_;
-	local($v);
-
-	return($regs{$r}) if defined($regs{$r});
-	return($r);
-	}
-
-sub main'QWPw
-	{
-	local($off,$reg)=@_;
-
-	return(&main'QWP($off*8,$reg));
-	}
-
-sub main'QWP
-	{
-	local($off,$reg)=@_;
-
-	$ret="$off(".&conv($reg).")";
-	return($ret);
-	}
-
-sub out3
-	{
-	local($name,$p1,$p2,$p3)=@_;
-
-	$p1=&conv($p1);
-	$p2=&conv($p2);
-	$p3=&conv($p3);
-	push(@out,"\t$name\t");
-	$l=length($p1)+1;
-	push(@out,$p1.",");
-	$ll=3-($l+9)/8;
-	$tmp1=sprintf("\t" x $ll);
-	push(@out,$tmp1);
-
-	$l=length($p2)+1;
-	push(@out,$p2.",");
-	$ll=3-($l+9)/8;
-	$tmp1=sprintf("\t" x $ll);
-	push(@out,$tmp1);
-
-	push(@out,&conv($p3)."\n");
-	}
-
-sub out2
-	{
-	local($name,$p1,$p2,$p3)=@_;
-
-	$p1=&conv($p1);
-	$p2=&conv($p2);
-	push(@out,"\t$name\t");
-	$l=length($p1)+1;
-	push(@out,$p1.",");
-	$ll=3-($l+9)/8;
-	$tmp1=sprintf("\t" x $ll);
-	push(@out,$tmp1);
-
-	push(@out,&conv($p2)."\n");
-	}
-
-sub out1
-	{
-	local($name,$p1)=@_;
-
-	$p1=&conv($p1);
-	push(@out,"\t$name\t".$p1."\n");
-	}
-
-sub out0
-	{
-	push(@out,"\t$_[0]\n");
-	}
-
-sub main'file
-	{
-	local($file)=@_;
-
-	local($tmp)=<<"EOF";
- # DEC Alpha assember
- # Generated from perl scripts contains in SSLeay
-	.file	1 "$file.s"
-	.set noat
-EOF
-	push(@out,$tmp);
-	}
-
-sub main'function_begin
-	{
-	local($func)=@_;
-
-print STDERR "$func\n";
-	local($tmp)=<<"EOF";
-	.text
-	.align $align
-	.globl $func
-	.ent $func
-${func}:
-${func}..ng:
-	.frame \$30,0,\$26,0
-	.prologue 0
-EOF
-	push(@out,$tmp);
-	$stack=0;
-	}
-
-sub main'function_end
-	{
-	local($func)=@_;
-
-	local($tmp)=<<"EOF";
-	ret	\$31,(\$26),1
-	.end $func
-EOF
-	push(@out,$tmp);
-	$stack=0;
-	%label=();
-	}
-
-sub main'function_end_A
-	{
-	local($func)=@_;
-
-	local($tmp)=<<"EOF";
-	ret	\$31,(\$26),1
-EOF
-	push(@out,$tmp);
-	}
-
-sub main'function_end_B
-	{
-	local($func)=@_;
-
-	$func=$under.$func;
-
-	push(@out,"\t.end $func\n");
-	$stack=0;
-	%label=();
-	}
-
-sub main'wparam
-	{
-	local($num)=@_;
-
-	if ($num < 6)
-		{
-		$num=20-$num;
-		return("r$num");
-		}
-	else
-		{ return(&main'QWP($stack+$num*8,"sp")); }
-	}
-
-sub main'stack_push
-	{
-	local($num)=@_;
-	$stack+=$num*8;
-	&main'sub("sp",$num*8,"sp");
-	}
-
-sub main'stack_pop
-	{
-	local($num)=@_;
-	$stack-=$num*8;
-	&main'add("sp",$num*8,"sp");
-	}
-
-sub main'swtmp
-	{
-	return(&main'QWP(($_[0])*8,"sp"));
-	}
-
-# Should use swtmp, which is above sp.  Linix can trash the stack above esp
-#sub main'wtmp
-#	{
-#	local($num)=@_;
-#
-#	return(&main'QWP(-($num+1)*4,"esp","",0));
-#	}
-
-sub main'comment
-	{
-	foreach (@_)
-		{
-		if (/^\s*$/)
-			{ push(@out,"\n"); }
-		else
-			{ push(@out,"\t$com_start $_ $com_end\n"); }
-		}
-	}
-
-sub main'label
-	{
-	if (!defined($label{$_[0]}))
-		{
-		$label{$_[0]}=$label;
-		$label++;
-		}
-	return('$'.$label{$_[0]});
-	}
-
-sub main'set_label
-	{
-	if (!defined($label{$_[0]}))
-		{
-		$label{$_[0]}=$label;
-		$label++;
-		}
-#	push(@out,".align $align\n") if ($_[1] != 0);
-	push(@out,'$'."$label{$_[0]}:\n");
-	}
-
-sub main'file_end
-	{
-	}
-
-sub main'data_word
-	{
-	push(@out,"\t.long $_[0]\n");
-	}
-
-@pool_free=();
-@pool_taken=();
-$curr_num=0;
-$max=0;
-
-sub main'init_pool
-	{
-	local($args)=@_;
-	local($i);
-
-	@pool_free=();
-	for ($i=(14+(6-$args)); $i >= 0; $i--)
-		{
-		push(@pool_free,"r$i");
-		}
-	print STDERR "START :register pool:@pool_free\n";
-	$curr_num=$max=0;
-	}
-
-sub main'fin_pool
-	{
-	printf STDERR "END %2d:register pool:@pool_free\n",$max;
-	}
-
-sub main'GR
-	{
-	local($r)=@_;
-	local($i,@n,$_);
-
-	foreach (@pool_free)
-		{
-		if ($r ne $_)
-			{ push(@n,$_); }
-		else
-			{
-			$curr_num++;
-			$max=$curr_num if ($curr_num > $max);
-			}
-		}
-	@pool_free=@n;
-print STDERR "GR:@pool_free\n" if $reg_alloc;
-	return(@_);
-	}
-
-sub main'NR
-	{
-	local($num)=@_;
-	local(@ret);
-
-	$num=1 if $num == 0;
-	($#pool_free >= ($num-1)) || croak "out of registers: want $num, have @pool_free";
-	while ($num > 0)
-		{
-		push(@ret,pop @pool_free);
-		$curr_num++;
-		$max=$curr_num if ($curr_num > $max);
-		$num--
-		}
-	print STDERR "nr @ret\n" if $n_debug;
-print STDERR "NR:@pool_free\n" if $reg_alloc;
-	return(@ret);
-
-	}
-
-sub main'FR
-	{
-	local(@r)=@_;
-	local(@a,$v,$w);
-
-	print STDERR "fr @r\n" if $n_debug;
-#	cluck "fr @r";
-	for $w (@pool_free)
-		{
-		foreach $v (@r)
-			{
-			croak "double register free of $v (@pool_free)" if $w eq $v;
-			}
-		}
-	foreach $v (@r)
-		{
-		croak "bad argument to FR" if ($v !~ /^r\d+$/);
-		if ($smear_regs)
-			{ unshift(@pool_free,$v); }
-		else	{ push(@pool_free,$v); }
-		$curr_num--;
-		}
-print STDERR "FR:@pool_free\n" if $reg_alloc;
-	}
-1;
diff --git a/crypto/openssl/crypto/perlasm/cbc.pl b/crypto/openssl/crypto/perlasm/cbc.pl
deleted file mode 100644
index e43dc9ae15ed..000000000000
--- a/crypto/openssl/crypto/perlasm/cbc.pl
+++ /dev/null
@@ -1,351 +0,0 @@
-#!/usr/local/bin/perl
-
-# void des_ncbc_encrypt(input, output, length, schedule, ivec, enc)
-# des_cblock (*input);
-# des_cblock (*output);
-# long length;
-# des_key_schedule schedule;
-# des_cblock (*ivec);
-# int enc;
-#
-# calls 
-# des_encrypt((DES_LONG *)tin,schedule,DES_ENCRYPT);
-#
-
-#&cbc("des_ncbc_encrypt","des_encrypt",0);
-#&cbc("BF_cbc_encrypt","BF_encrypt","BF_encrypt",
-#	1,4,5,3,5,-1);
-#&cbc("des_ncbc_encrypt","des_encrypt","des_encrypt",
-#	0,4,5,3,5,-1);
-#&cbc("des_ede3_cbc_encrypt","des_encrypt3","des_decrypt3",
-#	0,6,7,3,4,5);
-#
-# When doing a cipher that needs bigendian order,
-# for encrypt, the iv is kept in bigendian form,
-# while for decrypt, it is kept in little endian.
-sub cbc
-	{
-	local($name,$enc_func,$dec_func,$swap,$iv_off,$enc_off,$p1,$p2,$p3)=@_;
-	# name is the function name
-	# enc_func and dec_func and the functions to call for encrypt/decrypt
-	# swap is true if byte order needs to be reversed
-	# iv_off is parameter number for the iv 
-	# enc_off is parameter number for the encrypt/decrypt flag
-	# p1,p2,p3 are the offsets for parameters to be passed to the
-	# underlying calls.
-
-	&function_begin_B($name,"");
-	&comment("");
-
-	$in="esi";
-	$out="edi";
-	$count="ebp";
-
-	&push("ebp");
-	&push("ebx");
-	&push("esi");
-	&push("edi");
-
-	$data_off=4;
-	$data_off+=4 if ($p1 > 0);
-	$data_off+=4 if ($p2 > 0);
-	$data_off+=4 if ($p3 > 0);
-
-	&mov($count,	&wparam(2));	# length
-
-	&comment("getting iv ptr from parameter $iv_off");
-	&mov("ebx",	&wparam($iv_off));	# Get iv ptr
-
-	&mov($in,	&DWP(0,"ebx","",0));#	iv[0]
-	&mov($out,	&DWP(4,"ebx","",0));#	iv[1]
-
-	&push($out);
-	&push($in);
-	&push($out);	# used in decrypt for iv[1]
-	&push($in);	# used in decrypt for iv[0]
-
-	&mov("ebx",	"esp");		# This is the address of tin[2]
-
-	&mov($in,	&wparam(0));	# in
-	&mov($out,	&wparam(1));	# out
-
-	# We have loaded them all, how lets push things
-	&comment("getting encrypt flag from parameter $enc_off");
-	&mov("ecx",	&wparam($enc_off));	# Get enc flag
-	if ($p3 > 0)
-		{
-		&comment("get and push parameter $p3");
-		if ($enc_off != $p3)
-			{ &mov("eax",	&wparam($p3)); &push("eax"); }
-		else	{ &push("ecx"); }
-		}
-	if ($p2 > 0)
-		{
-		&comment("get and push parameter $p2");
-		if ($enc_off != $p2)
-			{ &mov("eax",	&wparam($p2)); &push("eax"); }
-		else	{ &push("ecx"); }
-		}
-	if ($p1 > 0)
-		{
-		&comment("get and push parameter $p1");
-		if ($enc_off != $p1)
-			{ &mov("eax",	&wparam($p1)); &push("eax"); }
-		else	{ &push("ecx"); }
-		}
-	&push("ebx");		# push data/iv
-
-	&cmp("ecx",0);
-	&jz(&label("decrypt"));
-
-	&and($count,0xfffffff8);
-	&mov("eax",	&DWP($data_off,"esp","",0));	# load iv[0]
-	&mov("ebx",	&DWP($data_off+4,"esp","",0));	# load iv[1]
-
-	&jz(&label("encrypt_finish"));
-
-	#############################################################
-
-	&set_label("encrypt_loop");
-	# encrypt start 
-	# "eax" and "ebx" hold iv (or the last cipher text)
-
-	&mov("ecx",	&DWP(0,$in,"",0));	# load first 4 bytes
-	&mov("edx",	&DWP(4,$in,"",0));	# second 4 bytes
-
-	&xor("eax",	"ecx");
-	&xor("ebx",	"edx");
-
-	&bswap("eax")	if $swap;
-	&bswap("ebx")	if $swap;
-
-	&mov(&DWP($data_off,"esp","",0),	"eax");	# put in array for call
-	&mov(&DWP($data_off+4,"esp","",0),	"ebx");	#
-
-	&call($enc_func);
-
-	&mov("eax",	&DWP($data_off,"esp","",0));
-	&mov("ebx",	&DWP($data_off+4,"esp","",0));
-
-	&bswap("eax")	if $swap;
-	&bswap("ebx")	if $swap;
-
-	&mov(&DWP(0,$out,"",0),"eax");
-	&mov(&DWP(4,$out,"",0),"ebx");
-
-	# eax and ebx are the next iv.
-
-	&add($in,	8);
-	&add($out,	8);
-
-	&sub($count,	8);
-	&jnz(&label("encrypt_loop"));
-
-###################################################################3
-	&set_label("encrypt_finish");
-	&mov($count,	&wparam(2));	# length
-	&and($count,	7);
-	&jz(&label("finish"));
-	&call(&label("PIC_point"));
-&set_label("PIC_point");
-	&blindpop("edx");
-	&lea("ecx",&DWP(&label("cbc_enc_jmp_table")."-".&label("PIC_point"),"edx"));
-	&mov($count,&DWP(0,"ecx",$count,4))
-	&add($count,"edx");
-	&xor("ecx","ecx");
-	&xor("edx","edx");
-	#&mov($count,&DWP(&label("cbc_enc_jmp_table"),"",$count,4));
-	&jmp_ptr($count);
-
-&set_label("ej7");
-	&xor("edx",		"edx") if $ppro; # ppro friendly
-	&movb(&HB("edx"),	&BP(6,$in,"",0));
-	&shl("edx",8);
-&set_label("ej6");
-	&movb(&HB("edx"),	&BP(5,$in,"",0));
-&set_label("ej5");
-	&movb(&LB("edx"),	&BP(4,$in,"",0));
-&set_label("ej4");
-	&mov("ecx",		&DWP(0,$in,"",0));
-	&jmp(&label("ejend"));
-&set_label("ej3");
-	&movb(&HB("ecx"),	&BP(2,$in,"",0));
-	&xor("ecx",		"ecx") if $ppro; # ppro friendly
-	&shl("ecx",8);
-&set_label("ej2");
-	&movb(&HB("ecx"),	&BP(1,$in,"",0));
-&set_label("ej1");
-	&movb(&LB("ecx"),	&BP(0,$in,"",0));
-&set_label("ejend");
-
-	&xor("eax",	"ecx");
-	&xor("ebx",	"edx");
-
-	&bswap("eax")	if $swap;
-	&bswap("ebx")	if $swap;
-
-	&mov(&DWP($data_off,"esp","",0),	"eax");	# put in array for call
-	&mov(&DWP($data_off+4,"esp","",0),	"ebx");	#
-
-	&call($enc_func);
-
-	&mov("eax",	&DWP($data_off,"esp","",0));
-	&mov("ebx",	&DWP($data_off+4,"esp","",0));
-
-	&bswap("eax")	if $swap;
-	&bswap("ebx")	if $swap;
-
-	&mov(&DWP(0,$out,"",0),"eax");
-	&mov(&DWP(4,$out,"",0),"ebx");
-
-	&jmp(&label("finish"));
-
-	#############################################################
-	#############################################################
-	&set_label("decrypt",1);
-	# decrypt start 
-	&and($count,0xfffffff8);
-	# The next 2 instructions are only for if the jz is taken
-	&mov("eax",	&DWP($data_off+8,"esp","",0));	# get iv[0]
-	&mov("ebx",	&DWP($data_off+12,"esp","",0));	# get iv[1]
-	&jz(&label("decrypt_finish"));
-
-	&set_label("decrypt_loop");
-	&mov("eax",	&DWP(0,$in,"",0));	# load first 4 bytes
-	&mov("ebx",	&DWP(4,$in,"",0));	# second 4 bytes
-
-	&bswap("eax")	if $swap;
-	&bswap("ebx")	if $swap;
-
-	&mov(&DWP($data_off,"esp","",0),	"eax");	# put back
-	&mov(&DWP($data_off+4,"esp","",0),	"ebx");	#
-
-	&call($dec_func);
-
-	&mov("eax",	&DWP($data_off,"esp","",0));	# get return
-	&mov("ebx",	&DWP($data_off+4,"esp","",0));	#
-
-	&bswap("eax")	if $swap;
-	&bswap("ebx")	if $swap;
-
-	&mov("ecx",	&DWP($data_off+8,"esp","",0));	# get iv[0]
-	&mov("edx",	&DWP($data_off+12,"esp","",0));	# get iv[1]
-
-	&xor("ecx",	"eax");
-	&xor("edx",	"ebx");
-
-	&mov("eax",	&DWP(0,$in,"",0));	# get old cipher text,
-	&mov("ebx",	&DWP(4,$in,"",0));	# next iv actually
-
-	&mov(&DWP(0,$out,"",0),"ecx");
-	&mov(&DWP(4,$out,"",0),"edx");
-
-	&mov(&DWP($data_off+8,"esp","",0),	"eax");	# save iv
-	&mov(&DWP($data_off+12,"esp","",0),	"ebx");	#
-
-	&add($in,	8);
-	&add($out,	8);
-
-	&sub($count,	8);
-	&jnz(&label("decrypt_loop"));
-############################ ENDIT #######################3
-	&set_label("decrypt_finish");
-	&mov($count,	&wparam(2));	# length
-	&and($count,	7);
-	&jz(&label("finish"));
-
-	&mov("eax",	&DWP(0,$in,"",0));	# load first 4 bytes
-	&mov("ebx",	&DWP(4,$in,"",0));	# second 4 bytes
-
-	&bswap("eax")	if $swap;
-	&bswap("ebx")	if $swap;
-
-	&mov(&DWP($data_off,"esp","",0),	"eax");	# put back
-	&mov(&DWP($data_off+4,"esp","",0),	"ebx");	#
-
-	&call($dec_func);
-
-	&mov("eax",	&DWP($data_off,"esp","",0));	# get return
-	&mov("ebx",	&DWP($data_off+4,"esp","",0));	#
-
-	&bswap("eax")	if $swap;
-	&bswap("ebx")	if $swap;
-
-	&mov("ecx",	&DWP($data_off+8,"esp","",0));	# get iv[0]
-	&mov("edx",	&DWP($data_off+12,"esp","",0));	# get iv[1]
-
-	&xor("ecx",	"eax");
-	&xor("edx",	"ebx");
-
-	# this is for when we exit
-	&mov("eax",	&DWP(0,$in,"",0));	# get old cipher text,
-	&mov("ebx",	&DWP(4,$in,"",0));	# next iv actually
-
-&set_label("dj7");
-	&rotr("edx",	16);
-	&movb(&BP(6,$out,"",0),	&LB("edx"));
-	&shr("edx",16);
-&set_label("dj6");
-	&movb(&BP(5,$out,"",0),	&HB("edx"));
-&set_label("dj5");
-	&movb(&BP(4,$out,"",0),	&LB("edx"));
-&set_label("dj4");
-	&mov(&DWP(0,$out,"",0),	"ecx");
-	&jmp(&label("djend"));
-&set_label("dj3");
-	&rotr("ecx",	16);
-	&movb(&BP(2,$out,"",0),	&LB("ecx"));
-	&shl("ecx",16);
-&set_label("dj2");
-	&movb(&BP(1,$in,"",0),	&HB("ecx"));
-&set_label("dj1");
-	&movb(&BP(0,$in,"",0),	&LB("ecx"));
-&set_label("djend");
-
-	# final iv is still in eax:ebx
-	&jmp(&label("finish"));
-
-
-############################ FINISH #######################3
-	&set_label("finish",1);
-	&mov("ecx",	&wparam($iv_off));	# Get iv ptr
-
-	#################################################
-	$total=16+4;
-	$total+=4 if ($p1 > 0);
-	$total+=4 if ($p2 > 0);
-	$total+=4 if ($p3 > 0);
-	&add("esp",$total);
-
-	&mov(&DWP(0,"ecx","",0),	"eax");	# save iv
-	&mov(&DWP(4,"ecx","",0),	"ebx");	# save iv
-
-	&function_end_A($name);
-
-	&align(64);
-	&set_label("cbc_enc_jmp_table");
-	&data_word("0");
-	&data_word(&label("ej1")."-".&label("PIC_point"));
-	&data_word(&label("ej2")."-".&label("PIC_point"));
-	&data_word(&label("ej3")."-".&label("PIC_point"));
-	&data_word(&label("ej4")."-".&label("PIC_point"));
-	&data_word(&label("ej5")."-".&label("PIC_point"));
-	&data_word(&label("ej6")."-".&label("PIC_point"));
-	&data_word(&label("ej7")."-".&label("PIC_point"));
-	# not used
-	#&set_label("cbc_dec_jmp_table",1);
-	#&data_word("0");
-	#&data_word(&label("dj1")."-".&label("PIC_point"));
-	#&data_word(&label("dj2")."-".&label("PIC_point"));
-	#&data_word(&label("dj3")."-".&label("PIC_point"));
-	#&data_word(&label("dj4")."-".&label("PIC_point"));
-	#&data_word(&label("dj5")."-".&label("PIC_point"));
-	#&data_word(&label("dj6")."-".&label("PIC_point"));
-	#&data_word(&label("dj7")."-".&label("PIC_point"));
-	&align(64);
-
-	&function_end_B($name);
-	
-	}
-
-1;
diff --git a/crypto/openssl/crypto/perlasm/readme b/crypto/openssl/crypto/perlasm/readme
deleted file mode 100644
index f02bbee75a1b..000000000000
--- a/crypto/openssl/crypto/perlasm/readme
+++ /dev/null
@@ -1,124 +0,0 @@
-The perl scripts in this directory are my 'hack' to generate
-multiple different assembler formats via the one origional script.
-
-The way to use this library is to start with adding the path to this directory
-and then include it.
-
-push(@INC,"perlasm","../../perlasm");
-require "x86asm.pl";
-
-The first thing we do is setup the file and type of assember
-
-&asm_init($ARGV[0],$0);
-
-The first argument is the 'type'.  Currently
-'cpp', 'sol', 'a.out', 'elf' or 'win32'.
-Argument 2 is the file name.
-
-The reciprocal function is
-&asm_finish() which should be called at the end.
-
-There are 2 main 'packages'. x86ms.pl, which is the microsoft assembler,
-and x86unix.pl which is the unix (gas) version.
-
-Functions of interest are:
-&external_label("des_SPtrans");	declare and external variable
-&LB(reg);			Low byte for a register
-&HB(reg);			High byte for a register
-&BP(off,base,index,scale)	Byte pointer addressing
-&DWP(off,base,index,scale)	Word pointer addressing
-&stack_push(num)		Basically a 'sub esp, num*4' with extra
-&stack_pop(num)			inverse of stack_push
-&function_begin(name,extra)	Start a function with pushing of
-				edi, esi, ebx and ebp.  extra is extra win32
-				external info that may be required.
-&function_begin_B(name,extra)	Same as norma function_begin but no pushing.
-&function_end(name)		Call at end of function.
-&function_end_A(name)		Standard pop and ret, for use inside functions
-&function_end_B(name)		Call at end but with poping or 'ret'.
-&swtmp(num)			Address on stack temp word.
-&wparam(num)			Parameter number num, that was push
-				in C convention.  This all works over pushes
-				and pops.
-&comment("hello there")		Put in a comment.
-&label("loop")			Refer to a label, normally a jmp target.
-&set_label("loop")		Set a label at this point.
-&data_word(word)		Put in a word of data.
-
-So how does this all hold together?  Given
-
-int calc(int len, int *data)
-	{
-	int i,j=0;
-
-	for (i=0; i<len; i++)
-		{
-		j+=other(data[i]);
-		}
-	}
-
-So a very simple version of this function could be coded as
-
-	push(@INC,"perlasm","../../perlasm");
-	require "x86asm.pl";
-	
-	&asm_init($ARGV[0],"cacl.pl");
-
-	&external_label("other");
-
-	$tmp1=	"eax";
-	$j=	"edi";
-	$data=	"esi";
-	$i=	"ebp";
-
-	&comment("a simple function");
-	&function_begin("calc");
-	&mov(	$data,		&wparam(1)); # data
-	&xor(	$j,		$j);
-	&xor(	$i,		$i);
-
-	&set_label("loop");
-	&cmp(	$i,		&wparam(0));
-	&jge(	&label("end"));
-
-	&mov(	$tmp1,		&DWP(0,$data,$i,4));
-	&push(	$tmp1);
-	&call(	"other");
-	&add(	$j,		"eax");
-	&pop(	$tmp1);
-	&inc(	$i);
-	&jmp(	&label("loop"));
-
-	&set_label("end");
-	&mov(	"eax",		$j);
-
-	&function_end("calc");
-
-	&asm_finish();
-
-The above example is very very unoptimised but gives an idea of how
-things work.
-
-There is also a cbc mode function generator in cbc.pl
-
-&cbc(	$name,
-	$encrypt_function_name,
-	$decrypt_function_name,
-	$true_if_byte_swap_needed,
-	$parameter_number_for_iv,
-	$parameter_number_for_encrypt_flag,
-	$first_parameter_to_pass,
-	$second_parameter_to_pass,
-	$third_parameter_to_pass);
-
-So for example, given
-void BF_encrypt(BF_LONG *data,BF_KEY *key);
-void BF_decrypt(BF_LONG *data,BF_KEY *key);
-void BF_cbc_encrypt(unsigned char *in, unsigned char *out, long length,
-        BF_KEY *ks, unsigned char *iv, int enc);
-
-&cbc("BF_cbc_encrypt","BF_encrypt","BF_encrypt",1,4,5,3,-1,-1);
-
-&cbc("des_ncbc_encrypt","des_encrypt","des_encrypt",0,4,5,3,5,-1);
-&cbc("des_ede3_cbc_encrypt","des_encrypt3","des_decrypt3",0,6,7,3,4,5);
-
diff --git a/crypto/openssl/crypto/perlasm/x86_64-xlate.pl b/crypto/openssl/crypto/perlasm/x86_64-xlate.pl
deleted file mode 100755
index ef1a4ce65685..000000000000
--- a/crypto/openssl/crypto/perlasm/x86_64-xlate.pl
+++ /dev/null
@@ -1,506 +0,0 @@
-#!/usr/bin/env perl
-
-# Ascetic x86_64 AT&T to MASM assembler translator by <appro>.
-#
-# Why AT&T to MASM and not vice versa? Several reasons. Because AT&T
-# format is way easier to parse. Because it's simpler to "gear" from
-# Unix ABI to Windows one [see cross-reference "card" at the end of
-# file]. Because Linux targets were available first...
-#
-# In addition the script also "distills" code suitable for GNU
-# assembler, so that it can be compiled with more rigid assemblers,
-# such as Solaris /usr/ccs/bin/as.
-#
-# This translator is not designed to convert *arbitrary* assembler
-# code from AT&T format to MASM one. It's designed to convert just
-# enough to provide for dual-ABI OpenSSL modules development...
-# There *are* limitations and you might have to modify your assembler
-# code or this script to achieve the desired result...
-#
-# Currently recognized limitations:
-#
-# - can't use multiple ops per line;
-# - indirect calls and jumps are not supported;
-#
-# Dual-ABI styling rules.
-#
-# 1. Adhere to Unix register and stack layout [see the end for
-#    explanation].
-# 2. Forget about "red zone," stick to more traditional blended
-#    stack frame allocation. If volatile storage is actually required
-#    that is. If not, just leave the stack as is.
-# 3. Functions tagged with ".type name,@function" get crafted with
-#    unified Win64 prologue and epilogue automatically. If you want
-#    to take care of ABI differences yourself, tag functions as
-#    ".type name,@abi-omnipotent" instead.
-# 4. To optimize the Win64 prologue you can specify number of input
-#    arguments as ".type name,@function,N." Keep in mind that if N is
-#    larger than 6, then you *have to* write "abi-omnipotent" code,
-#    because >6 cases can't be addressed with unified prologue.
-# 5. Name local labels as .L*, do *not* use dynamic labels such as 1:
-#    (sorry about latter).
-# 6. Don't use [or hand-code with .byte] "rep ret." "ret" mnemonic is
-#    required to identify the spots, where to inject Win64 epilogue!
-#    But on the pros, it's then prefixed with rep automatically:-)
-# 7. Due to MASM limitations [and certain general counter-intuitivity
-#    of ip-relative addressing] generation of position-independent
-#    code is assisted by synthetic directive, .picmeup, which puts
-#    address of the *next* instruction into target register.
-#
-#    Example 1:
-#		.picmeup	%rax
-#		lea		.Label-.(%rax),%rax
-#    Example 2:
-#		.picmeup	%rcx
-#	.Lpic_point:
-#		...
-#		lea		.Label-.Lpic_point(%rcx),%rbp
-
-my $output = shift;
-open STDOUT,">$output" || die "can't open $output: $!";
-
-my $masm=1 if ($output =~ /\.asm/);
-
-my $current_segment;
-my $current_function;
-
-{ package opcode;	# pick up opcodes
-    sub re {
-	my	$self = shift;	# single instance in enough...
-	local	*line = shift;
-	undef	$ret;
-
-	if ($line =~ /^([a-z]+)/i) {
-	    $self->{op} = $1;
-	    $ret = $self;
-	    $line = substr($line,@+[0]); $line =~ s/^\s+//;
-
-	    undef $self->{sz};
-	    if ($self->{op} =~ /(movz)b.*/) {	# movz is pain...
-		$self->{op} = $1;
-		$self->{sz} = "b";
-	    } elsif ($self->{op} =~ /([a-z]{3,})([qlwb])/) {
-		$self->{op} = $1;
-		$self->{sz} = $2;
-	    }
-	}
-	$ret;
-    }
-    sub size {
-	my $self = shift;
-	my $sz   = shift;
-	$self->{sz} = $sz if (defined($sz) && !defined($self->{sz}));
-	$self->{sz};
-    }
-    sub out {
-	my $self = shift;
-	if (!$masm) {
-	    if ($self->{op} eq "movz") {	# movz in pain...
-		sprintf "%s%s%s",$self->{op},$self->{sz},shift;
-	    } elsif ($self->{op} eq "ret") {
-	    	".byte	0xf3,0xc3";
-	    } else {
-		"$self->{op}$self->{sz}";
-	    }
-	} else {
-	    $self->{op} =~ s/movz/movzx/;
-	    if ($self->{op} eq "ret") {
-		$self->{op} = "";
-		if ($current_function->{abi} eq "svr4") {
-		    $self->{op} = "mov	rdi,QWORD PTR 8[rsp]\t;WIN64 epilogue\n\t".
-				  "mov	rsi,QWORD PTR 16[rsp]\n\t";
-	    	}
-		$self->{op} .= "DB\t0F3h,0C3h\t\t;repret";
-	    }
-	    $self->{op};
-	}
-    }
-}
-{ package const;	# pick up constants, which start with $
-    sub re {
-	my	$self = shift;	# single instance in enough...
-	local	*line = shift;
-	undef	$ret;
-
-	if ($line =~ /^\$([^,]+)/) {
-	    $self->{value} = $1;
-	    $ret = $self;
-	    $line = substr($line,@+[0]); $line =~ s/^\s+//;
-	}
-	$ret;
-    }
-    sub out {
-    	my $self = shift;
-
-	if (!$masm) {
-	    sprintf "\$%s",$self->{value};
-	} else {
-	    $self->{value} =~ s/0x([0-9a-f]+)/0$1h/ig;
-	    sprintf "%s",$self->{value};
-	}
-    }
-}
-{ package ea;		# pick up effective addresses: expr(%reg,%reg,scale)
-    sub re {
-	my	$self = shift;	# single instance in enough...
-	local	*line = shift;
-	undef	$ret;
-
-	if ($line =~ /^([^\(,]*)\(([%\w,]+)\)/) {
-	    $self->{label} = $1;
-	    ($self->{base},$self->{index},$self->{scale})=split(/,/,$2);
-	    $self->{scale} = 1 if (!defined($self->{scale}));
-	    $ret = $self;
-	    $line = substr($line,@+[0]); $line =~ s/^\s+//;
-
-	    $self->{base}  =~ s/^%//;
-	    $self->{index} =~ s/^%// if (defined($self->{index}));
-	}
-	$ret;
-    }
-    sub size {}
-    sub out {
-    	my $self = shift;
-	my $sz = shift;
-
-	if (!$masm) {
-	    # elder GNU assembler insists on 64-bit EAs:-(
-	    # on pros side, this results in more compact code:-)
-	    $self->{index} =~ s/^[er](.?[0-9xp])[d]?$/r\1/;
-	    $self->{base}  =~ s/^[er](.?[0-9xp])[d]?$/r\1/;
-	    # Solaris /usr/ccs/bin/as can't handle multiplications
-	    # in $self->{label}
-	    $self->{label} =~ s/(?<![0-9a-f])(0[x0-9a-f]+)/oct($1)/eg;
-	    $self->{label} =~ s/([0-9]+\s*[\*\/\%]\s*[0-9]+)/eval($1)/eg;
-
-	    if (defined($self->{index})) {
-		sprintf "%s(%%%s,%%%s,%d)",
-					$self->{label},$self->{base},
-					$self->{index},$self->{scale};
-	    } else {
-		sprintf "%s(%%%s)",	$self->{label},$self->{base};
-	    }
-	} else {
-	    %szmap = ( b=>"BYTE", w=>"WORD", l=>"DWORD", q=>"QWORD" );
-
-	    $self->{label} =~ s/\./\$/g;
-	    $self->{label} =~ s/0x([0-9a-f]+)/0$1h/ig;
-	    $self->{label} = "($self->{label})" if ($self->{label} =~ /[\*\+\-\/]/);
-
-	    if (defined($self->{index})) {
-		sprintf "%s PTR %s[%s*%d+%s]",$szmap{$sz},
-					$self->{label},
-					$self->{index},$self->{scale},
-					$self->{base};
-	    } else {
-		sprintf "%s PTR %s[%s]",$szmap{$sz},
-					$self->{label},$self->{base};
-	    }
-	}
-    }
-}
-{ package register;	# pick up registers, which start with %.
-    sub re {
-	my	$class = shift;	# muliple instances...
-	my	$self = {};
-	local	*line = shift;
-	undef	$ret;
-
-	if ($line =~ /^%(\w+)/) {
-	    bless $self,$class;
-	    $self->{value} = $1;
-	    $ret = $self;
-	    $line = substr($line,@+[0]); $line =~ s/^\s+//;
-	}
-	$ret;
-    }
-    sub size {
-	my	$self = shift;
-	undef	$ret;
-
-	if    ($self->{value} =~ /^r[\d]+b$/i)	{ $ret="b"; }
-	elsif ($self->{value} =~ /^r[\d]+w$/i)	{ $ret="w"; }
-	elsif ($self->{value} =~ /^r[\d]+d$/i)	{ $ret="l"; }
-	elsif ($self->{value} =~ /^r[\w]+$/i)	{ $ret="q"; }
-	elsif ($self->{value} =~ /^[a-d][hl]$/i){ $ret="b"; }
-	elsif ($self->{value} =~ /^[\w]{2}l$/i)	{ $ret="b"; }
-	elsif ($self->{value} =~ /^[\w]{2}$/i)	{ $ret="w"; }
-	elsif ($self->{value} =~ /^e[a-z]{2}$/i){ $ret="l"; }
-
-	$ret;
-    }
-    sub out {
-    	my $self = shift;
-	sprintf $masm?"%s":"%%%s",$self->{value};
-    }
-}
-{ package label;	# pick up labels, which end with :
-    sub re {
-	my	$self = shift;	# single instance is enough...
-	local	*line = shift;
-	undef	$ret;
-
-	if ($line =~ /(^[\.\w]+\:)/) {
-	    $self->{value} = $1;
-	    $ret = $self;
-	    $line = substr($line,@+[0]); $line =~ s/^\s+//;
-
-	    $self->{value} =~ s/\.L/\$L/ if ($masm);
-	}
-	$ret;
-    }
-    sub out {
-	my $self = shift;
-
-	if (!$masm) {
-	    $self->{value};
-	} elsif ($self->{value} ne "$current_function->{name}:") {
-	    $self->{value};
-	} elsif ($current_function->{abi} eq "svr4") {
-	    my $func =	"$current_function->{name}	PROC\n".
-			"	mov	QWORD PTR 8[rsp],rdi\t;WIN64 prologue\n".
-			"	mov	QWORD PTR 16[rsp],rsi\n";
-	    my $narg = $current_function->{narg};
-	    $narg=6 if (!defined($narg));
-	    $func .= "	mov	rdi,rcx\n" if ($narg>0);
-	    $func .= "	mov	rsi,rdx\n" if ($narg>1);
-	    $func .= "	mov	rdx,r8\n"  if ($narg>2);
-	    $func .= "	mov	rcx,r9\n"  if ($narg>3);
-	    $func .= "	mov	r8,QWORD PTR 40[rsp]\n" if ($narg>4);
-	    $func .= "	mov	r9,QWORD PTR 48[rsp]\n" if ($narg>5);
-	    $func .= "\n";
-	} else {
-	   "$current_function->{name}	PROC";
-	}
-    }
-}
-{ package expr;		# pick up expressioins
-    sub re {
-	my	$self = shift;	# single instance is enough...
-	local	*line = shift;
-	undef	$ret;
-
-	if ($line =~ /(^[^,]+)/) {
-	    $self->{value} = $1;
-	    $ret = $self;
-	    $line = substr($line,@+[0]); $line =~ s/^\s+//;
-
-	    $self->{value} =~ s/\.L/\$L/g if ($masm);
-	}
-	$ret;
-    }
-    sub out {
-	my $self = shift;
-	$self->{value};
-    }
-}
-{ package directive;	# pick up directives, which start with .
-    sub re {
-	my	$self = shift;	# single instance is enough...
-	local	*line = shift;
-	undef	$ret;
-	my	$dir;
-	my	%opcode =	# lea 2f-1f(%rip),%dst; 1: nop; 2:
-		(	"%rax"=>0x01058d48,	"%rcx"=>0x010d8d48,
-			"%rdx"=>0x01158d48,	"%rbx"=>0x011d8d48,
-			"%rsp"=>0x01258d48,	"%rbp"=>0x012d8d48,
-			"%rsi"=>0x01358d48,	"%rdi"=>0x013d8d48,
-			"%r8" =>0x01058d4c,	"%r9" =>0x010d8d4c,
-			"%r10"=>0x01158d4c,	"%r11"=>0x011d8d4c,
-			"%r12"=>0x01258d4c,	"%r13"=>0x012d8d4c,
-			"%r14"=>0x01358d4c,	"%r15"=>0x013d8d4c	);
-
-	if ($line =~ /^\s*(\.\w+)/) {
-	    if (!$masm) {
-		$self->{value} = $1;
-		$line =~ s/\@abi\-omnipotent/\@function/;
-		$line =~ s/\@function.*/\@function/;
-		if ($line =~ /\.picmeup\s+(%r[\w]+)/i) {
-		    $self->{value} = sprintf "\t.long\t0x%x,0x90000000",$opcode{$1};
-		} else {
-		    $self->{value} = $line;
-		}
-		$line = "";
-		return $self;
-	    }
-
-	    $dir = $1;
-	    $ret = $self;
-	    undef $self->{value};
-	    $line = substr($line,@+[0]); $line =~ s/^\s+//;
-	    SWITCH: for ($dir) {
-		/\.(text)/
-			    && do { my $v=undef;
-				    $v="$current_segment\tENDS\n" if ($current_segment);
-				    $current_segment = "_$1\$";
-				    $current_segment =~ tr/[a-z]/[A-Z]/;
-				    $v.="$current_segment\tSEGMENT ALIGN(64) 'CODE'";
-				    $self->{value} = $v;
-				    last;
-				  };
-		/\.globl/   && do { $self->{value} = "PUBLIC\t".$line; last; };
-		/\.type/    && do { ($sym,$type,$narg) = split(',',$line);
-				    if ($type eq "\@function") {
-					undef $current_function;
-					$current_function->{name} = $sym;
-					$current_function->{abi}  = "svr4";
-					$current_function->{narg} = $narg;
-				    } elsif ($type eq "\@abi-omnipotent") {
-					undef $current_function;
-					$current_function->{name} = $sym;
-				    }
-				    last;
-				  };
-		/\.size/    && do { if (defined($current_function)) {
-					$self->{value}="$current_function->{name}\tENDP";
-					undef $current_function;
-				    }
-				    last;
-				  };
-		/\.align/   && do { $self->{value} = "ALIGN\t".$line; last; };
-		/\.(byte|value|long|quad)/
-			    && do { my @arr = split(',',$line);
-				    my $sz  = substr($1,0,1);
-				    my $last = pop(@arr);
-
-				    $sz =~ tr/bvlq/BWDQ/;
-				    $self->{value} = "\tD$sz\t";
-				    for (@arr) { $self->{value} .= sprintf"0%Xh,",oct; }
-				    $self->{value} .= sprintf"0%Xh",oct($last);
-				    last;
-				  };
-		/\.picmeup/ && do { $self->{value} = sprintf"\tDD\t 0%Xh,090000000h",$opcode{$line};
-				    last;
-				  };
-	    }
-	    $line = "";
-	}
-
-	$ret;
-    }
-    sub out {
-	my $self = shift;
-	$self->{value};
-    }
-}
-
-while($line=<>) {
-
-    chomp($line);
-
-    $line =~ s|[#!].*$||;	# get rid of asm-style comments...
-    $line =~ s|/\*.*\*/||;	# ... and C-style comments...
-    $line =~ s|^\s+||;		# ... and skip white spaces in beginning
-
-    undef $label;
-    undef $opcode;
-    undef $dst;
-    undef $src;
-    undef $sz;
-
-    if ($label=label->re(\$line))	{ print $label->out(); }
-
-    if (directive->re(\$line)) {
-	printf "%s",directive->out();
-    } elsif ($opcode=opcode->re(\$line)) { ARGUMENT: {
-
-	if ($src=register->re(\$line))	{ opcode->size($src->size()); }
-	elsif ($src=const->re(\$line))	{ }
-	elsif ($src=ea->re(\$line))	{ }
-	elsif ($src=expr->re(\$line))	{ }
-
-	last ARGUMENT if ($line !~ /^,/);
-
-	$line = substr($line,1); $line =~ s/^\s+//;
-
-	if ($dst=register->re(\$line))	{ opcode->size($dst->size()); }
-	elsif ($dst=const->re(\$line))	{ }
-	elsif ($dst=ea->re(\$line))	{ }
-
-	} # ARGUMENT:
-
-	$sz=opcode->size();
-
-	if (defined($dst)) {
-	    if (!$masm) {
-		printf "\t%s\t%s,%s",	$opcode->out($dst->size()),
-					$src->out($sz),$dst->out($sz);
-	    } else {
-		printf "\t%s\t%s,%s",	$opcode->out(),
-					$dst->out($sz),$src->out($sz);
-	    }
-	} elsif (defined($src)) {
-	    printf "\t%s\t%s",$opcode->out(),$src->out($sz);
-	} else {
-	    printf "\t%s",$opcode->out();
-	}
-    }
-
-    print $line,"\n";
-}
-
-print "\n$current_segment\tENDS\nEND\n" if ($masm);
-
-close STDOUT;
-
-#################################################
-# Cross-reference x86_64 ABI "card"
-#
-# 		Unix		Win64
-# %rax		*		*
-# %rbx		-		-
-# %rcx		#4		#1
-# %rdx		#3		#2
-# %rsi		#2		-
-# %rdi		#1		-
-# %rbp		-		-
-# %rsp		-		-
-# %r8		#5		#3
-# %r9		#6		#4
-# %r10		*		*
-# %r11		*		*
-# %r12		-		-
-# %r13		-		-
-# %r14		-		-
-# %r15		-		-
-# 
-# (*)	volatile register
-# (-)	preserved by callee
-# (#)	Nth argument, volatile
-#
-# In Unix terms top of stack is argument transfer area for arguments
-# which could not be accomodated in registers. Or in other words 7th
-# [integer] argument resides at 8(%rsp) upon function entry point.
-# 128 bytes above %rsp constitute a "red zone" which is not touched
-# by signal handlers and can be used as temporal storage without
-# allocating a frame.
-#
-# In Win64 terms N*8 bytes on top of stack is argument transfer area,
-# which belongs to/can be overwritten by callee. N is the number of
-# arguments passed to callee, *but* not less than 4! This means that
-# upon function entry point 5th argument resides at 40(%rsp), as well
-# as that 32 bytes from 8(%rsp) can always be used as temporal
-# storage [without allocating a frame].
-#
-# All the above means that if assembler programmer adheres to Unix
-# register and stack layout, but disregards the "red zone" existense,
-# it's possible to use following prologue and epilogue to "gear" from
-# Unix to Win64 ABI in leaf functions with not more than 6 arguments.
-#
-# omnipotent_function:
-# ifdef WIN64
-#	movq	%rdi,8(%rsp)
-#	movq	%rsi,16(%rsp)
-#	movq	%rcx,%rdi	; if 1st argument is actually present
-#	movq	%rdx,%rsi	; if 2nd argument is actually ...
-#	movq	%r8,%rdx	; if 3rd argument is ...
-#	movq	%r9,%rcx	; if 4th argument ...
-#	movq	40(%rsp),%r8	; if 5th ...
-#	movq	48(%rsp),%r9	; if 6th ...
-# endif
-#	...
-# ifdef WIN64
-#	movq	8(%rsp),%rdi
-#	movq	16(%rsp),%rsi
-# endif
-#	ret
diff --git a/crypto/openssl/crypto/perlasm/x86asm.pl b/crypto/openssl/crypto/perlasm/x86asm.pl
deleted file mode 100644
index 5979122158fd..000000000000
--- a/crypto/openssl/crypto/perlasm/x86asm.pl
+++ /dev/null
@@ -1,130 +0,0 @@
-#!/usr/local/bin/perl
-
-# require 'x86asm.pl';
-# &asm_init("cpp","des-586.pl");
-# XXX
-# XXX
-# main'asm_finish
-
-sub main'asm_finish
-	{
-	&file_end();
-	&asm_finish_cpp() if $cpp;
-	print &asm_get_output();
-	}
-
-sub main'asm_init
-	{
-	($type,$fn,$i386)=@_;
-	$filename=$fn;
-
-	$elf=$cpp=$coff=$aout=$win32=$netware=$mwerks=0;
-	if (	($type eq "elf"))
-		{ $elf=1; require "x86unix.pl"; }
-	elsif (	($type eq "a.out"))
-		{ $aout=1; require "x86unix.pl"; }
-	elsif (	($type eq "coff" or $type eq "gaswin"))
-		{ $coff=1; require "x86unix.pl"; }
-	elsif (	($type eq "cpp"))
-		{ $cpp=1; require "x86unix.pl"; }
-	elsif (	($type eq "win32"))
-		{ $win32=1; require "x86ms.pl"; }
-	elsif (	($type eq "win32n"))
-		{ $win32=1; require "x86nasm.pl"; }
-	elsif (	($type eq "nw-nasm"))
-		{ $netware=1; require "x86nasm.pl"; }
-	elsif (	($type eq "nw-mwasm"))
-		{ $netware=1; $mwerks=1; require "x86nasm.pl"; }
-	else
-		{
-		print STDERR <<"EOF";
-Pick one target type from
-	elf	- Linux, FreeBSD, Solaris x86, etc.
-	a.out	- OpenBSD, DJGPP, etc.
-	coff	- GAS/COFF such as Win32 targets
-	win32	- Windows 95/Windows NT
-	win32n	- Windows 95/Windows NT NASM format
-	nw-nasm - NetWare NASM format
-	nw-mwasm- NetWare Metrowerks Assembler
-EOF
-		exit(1);
-		}
-
-	$pic=0;
-	for (@ARGV) {	$pic=1 if (/\-[fK]PIC/i);	}
-
-	&asm_init_output();
-
-&comment("Don't even think of reading this code");
-&comment("It was automatically generated by $filename");
-&comment("Which is a perl program used to generate the x86 assember for");
-&comment("any of ELF, a.out, COFF, Win32, ...");
-&comment("eric <eay\@cryptsoft.com>");
-&comment("");
-
-	$filename =~ s/\.pl$//;
-	&file($filename);
-	}
-
-sub asm_finish_cpp
-	{
-	return unless $cpp;
-
-	local($tmp,$i);
-	foreach $i (&get_labels())
-		{
-		$tmp.="#define $i _$i\n";
-		}
-	print <<"EOF";
-/* Run the C pre-processor over this file with one of the following defined
- * ELF - elf object files,
- * OUT - a.out object files,
- * BSDI - BSDI style a.out object files
- * SOL - Solaris style elf
- */
-
-#define TYPE(a,b)       .type   a,b
-#define SIZE(a,b)       .size   a,b
-
-#if defined(OUT) || (defined(BSDI) && !defined(ELF))
-$tmp
-#endif
-
-#ifdef OUT
-#define OK	1
-#define ALIGN	4
-#if defined(__CYGWIN__) || defined(__DJGPP__) || (__MINGW32__)
-#undef SIZE
-#undef TYPE
-#define SIZE(a,b)
-#define TYPE(a,b)	.def a; .scl 2; .type 32; .endef
-#endif /* __CYGWIN || __DJGPP */
-#endif
-
-#if defined(BSDI) && !defined(ELF)
-#define OK              1
-#define ALIGN           4
-#undef SIZE
-#undef TYPE
-#define SIZE(a,b)
-#define TYPE(a,b)
-#endif
-
-#if defined(ELF) || defined(SOL)
-#define OK              1
-#define ALIGN           16
-#endif
-
-#ifndef OK
-You need to define one of
-ELF - elf systems - linux-elf, NetBSD and DG-UX
-OUT - a.out systems - linux-a.out and FreeBSD
-SOL - solaris systems, which are elf with strange comment lines
-BSDI - a.out with a very primative version of as.
-#endif
-
-/* Let the Assembler begin :-) */
-EOF
-	}
-
-1;
diff --git a/crypto/openssl/crypto/perlasm/x86ms.pl b/crypto/openssl/crypto/perlasm/x86ms.pl
deleted file mode 100644
index 82538a9a9af8..000000000000
--- a/crypto/openssl/crypto/perlasm/x86ms.pl
+++ /dev/null
@@ -1,464 +0,0 @@
-#!/usr/local/bin/perl
-
-package x86ms;
-
-$label="L000";
-
-%lb=(	'eax',	'al',
-	'ebx',	'bl',
-	'ecx',	'cl',
-	'edx',	'dl',
-	'ax',	'al',
-	'bx',	'bl',
-	'cx',	'cl',
-	'dx',	'dl',
-	);
-
-%hb=(	'eax',	'ah',
-	'ebx',	'bh',
-	'ecx',	'ch',
-	'edx',	'dh',
-	'ax',	'ah',
-	'bx',	'bh',
-	'cx',	'ch',
-	'dx',	'dh',
-	);
-
-sub main'asm_init_output { @out=(); }
-sub main'asm_get_output { return(@out); }
-sub main'get_labels { return(@labels); }
-sub main'external_label
-{
-	push(@labels,@_);
-	foreach (@_) {
-		push(@out, "EXTRN\t_$_:DWORD\n");
-	}
-}
-
-sub main'LB
-	{
-	(defined($lb{$_[0]})) || die "$_[0] does not have a 'low byte'\n";
-	return($lb{$_[0]});
-	}
-
-sub main'HB
-	{
-	(defined($hb{$_[0]})) || die "$_[0] does not have a 'high byte'\n";
-	return($hb{$_[0]});
-	}
-
-sub main'BP
-	{
-	&get_mem("BYTE",@_);
-	}
-
-sub main'DWP
-	{
-	&get_mem("DWORD",@_);
-	}
-
-sub main'QWP
-	{
-	&get_mem("QWORD",@_);
-	}
-
-sub main'BC
-	{
-	return @_;
-	}
-
-sub main'DWC
-	{
-	return @_;
-	}
-
-sub main'stack_push
-	{
-	local($num)=@_;
-	$stack+=$num*4;
-	&main'sub("esp",$num*4);
-	}
-
-sub main'stack_pop
-	{
-	local($num)=@_;
-	$stack-=$num*4;
-	&main'add("esp",$num*4);
-	}
-
-sub get_mem
-	{
-	local($size,$addr,$reg1,$reg2,$idx)=@_;
-	local($t,$post);
-	local($ret)="$size PTR ";
-
-	$addr =~ s/^\s+//;
-	if ($addr =~ /^(.+)\+(.+)$/)
-		{
-		$reg2=&conv($1);
-		$addr="_$2";
-		}
-	elsif ($addr =~ /^[_a-z][_a-z0-9]*$/i)
-		{
-		$addr="_$addr";
-		}
-
-	if ($addr =~ /^.+\-.+$/) { $addr="($addr)"; }
-
-	$reg1="$regs{$reg1}" if defined($regs{$reg1});
-	$reg2="$regs{$reg2}" if defined($regs{$reg2});
-	if (($addr ne "") && ($addr ne 0))
-		{
-		if ($addr !~ /^-/)
-			{ $ret.=$addr; }
-		else	{ $post=$addr; }
-		}
-	if ($reg2 ne "")
-		{
-		$t="";
-		$t="*$idx" if ($idx != 0);
-		$reg1="+".$reg1 if ("$reg1$post" ne "");
-		$ret.="[$reg2$t$reg1$post]";
-		}
-	else
-		{
-		$ret.="[$reg1$post]"
-		}
-	$ret =~ s/\[\]//;	# in case $addr was the only argument
-	return($ret);
-	}
-
-sub main'mov	{ &out2("mov",@_); }
-sub main'movb	{ &out2("mov",@_); }
-sub main'and	{ &out2("and",@_); }
-sub main'or	{ &out2("or",@_); }
-sub main'shl	{ &out2("shl",@_); }
-sub main'shr	{ &out2("shr",@_); }
-sub main'xor	{ &out2("xor",@_); }
-sub main'xorb	{ &out2("xor",@_); }
-sub main'add	{ &out2("add",@_); }
-sub main'adc	{ &out2("adc",@_); }
-sub main'sub	{ &out2("sub",@_); }
-sub main'sbb	{ &out2("sbb",@_); }
-sub main'rotl	{ &out2("rol",@_); }
-sub main'rotr	{ &out2("ror",@_); }
-sub main'exch	{ &out2("xchg",@_); }
-sub main'cmp	{ &out2("cmp",@_); }
-sub main'lea	{ &out2("lea",@_); }
-sub main'mul	{ &out1("mul",@_); }
-sub main'div	{ &out1("div",@_); }
-sub main'dec	{ &out1("dec",@_); }
-sub main'inc	{ &out1("inc",@_); }
-sub main'jmp	{ &out1("jmp",@_); }
-sub main'jmp_ptr { &out1p("jmp",@_); }
-sub main'je	{ &out1("je",@_); }
-sub main'jle	{ &out1("jle",@_); }
-sub main'jz	{ &out1("jz",@_); }
-sub main'jge	{ &out1("jge",@_); }
-sub main'jl	{ &out1("jl",@_); }
-sub main'ja	{ &out1("ja",@_); }
-sub main'jae	{ &out1("jae",@_); }
-sub main'jb	{ &out1("jb",@_); }
-sub main'jbe	{ &out1("jbe",@_); }
-sub main'jc	{ &out1("jc",@_); }
-sub main'jnc	{ &out1("jnc",@_); }
-sub main'jnz	{ &out1("jnz",@_); }
-sub main'jne	{ &out1("jne",@_); }
-sub main'jno	{ &out1("jno",@_); }
-sub main'push	{ &out1("push",@_); $stack+=4; }
-sub main'pop	{ &out1("pop",@_); $stack-=4; }
-sub main'pushf	{ &out0("pushfd"); $stack+=4; }
-sub main'popf	{ &out0("popfd"); $stack-=4; }
-sub main'bswap	{ &out1("bswap",@_); &using486(); }
-sub main'not	{ &out1("not",@_); }
-sub main'call	{ &out1("call",($_[0]=~/^\$L/?'':'_').$_[0]); }
-sub main'call_ptr { &out1p("call",@_); }
-sub main'ret	{ &out0("ret"); }
-sub main'nop	{ &out0("nop"); }
-sub main'test	{ &out2("test",@_); }
-sub main'bt	{ &out2("bt",@_); }
-sub main'leave	{ &out0("leave"); }
-sub main'cpuid  { &out0("DW\t0A20Fh"); }
-sub main'rdtsc  { &out0("DW\t0310Fh"); }
-sub main'halt	{ &out0("hlt"); }
-sub main'movz	{ &out2("movzx",@_); }
-sub main'neg	{ &out1("neg",@_); }
-sub main'cld	{ &out0("cld"); }
-
-# SSE2
-sub main'emms	{ &out0("emms"); }
-sub main'movd	{ &out2("movd",@_); }
-sub main'movq	{ &out2("movq",@_); }
-sub main'movdqu	{ &out2("movdqu",@_); }
-sub main'movdqa	{ &out2("movdqa",@_); }
-sub main'movdq2q{ &out2("movdq2q",@_); }
-sub main'movq2dq{ &out2("movq2dq",@_); }
-sub main'paddq	{ &out2("paddq",@_); }
-sub main'pmuludq{ &out2("pmuludq",@_); }
-sub main'psrlq	{ &out2("psrlq",@_); }
-sub main'psllq	{ &out2("psllq",@_); }
-sub main'pxor	{ &out2("pxor",@_); }
-sub main'por	{ &out2("por",@_); }
-sub main'pand	{ &out2("pand",@_); }
-
-sub out2
-	{
-	local($name,$p1,$p2)=@_;
-	local($l,$t);
-
-	push(@out,"\t$name\t");
-	$t=&conv($p1).",";
-	$l=length($t);
-	push(@out,$t);
-	$l=4-($l+9)/8;
-	push(@out,"\t" x $l);
-	push(@out,&conv($p2));
-	push(@out,"\n");
-	}
-
-sub out0
-	{
-	local($name)=@_;
-
-	push(@out,"\t$name\n");
-	}
-
-sub out1
-	{
-	local($name,$p1)=@_;
-	local($l,$t);
-
-	push(@out,"\t$name\t".&conv($p1)."\n");
-	}
-
-sub conv
-	{
-	local($p)=@_;
-
-	$p =~ s/0x([0-9A-Fa-f]+)/0$1h/;
-	return $p;
-	}
-
-sub using486
-	{
-	return if $using486;
-	$using486++;
-	grep(s/\.386/\.486/,@out);
-	}
-
-sub main'file
-	{
-	local($file)=@_;
-
-	local($tmp)=<<"EOF";
-	TITLE	$file.asm
-        .386
-.model	FLAT
-_TEXT\$	SEGMENT PAGE 'CODE'
-
-EOF
-	push(@out,$tmp);
-	}
-
-sub main'function_begin
-	{
-	local($func,$extra)=@_;
-
-	push(@labels,$func);
-
-	local($tmp)=<<"EOF";
-PUBLIC	_$func
-$extra
-_$func PROC NEAR
-	push	ebp
-	push	ebx
-	push	esi
-	push	edi
-EOF
-	push(@out,$tmp);
-	$stack=20;
-	}
-
-sub main'function_begin_B
-	{
-	local($func,$extra)=@_;
-
-	local($tmp)=<<"EOF";
-PUBLIC	_$func
-$extra
-_$func PROC NEAR
-EOF
-	push(@out,$tmp);
-	$stack=4;
-	}
-
-sub main'function_end
-	{
-	local($func)=@_;
-
-	local($tmp)=<<"EOF";
-	pop	edi
-	pop	esi
-	pop	ebx
-	pop	ebp
-	ret
-_$func ENDP
-EOF
-	push(@out,$tmp);
-	$stack=0;
-	%label=();
-	}
-
-sub main'function_end_B
-	{
-	local($func)=@_;
-
-	local($tmp)=<<"EOF";
-_$func ENDP
-EOF
-	push(@out,$tmp);
-	$stack=0;
-	%label=();
-	}
-
-sub main'function_end_A
-	{
-	local($func)=@_;
-
-	local($tmp)=<<"EOF";
-	pop	edi
-	pop	esi
-	pop	ebx
-	pop	ebp
-	ret
-EOF
-	push(@out,$tmp);
-	}
-
-sub main'file_end
-	{
-	# try to detect if SSE2 or MMX extensions were used...
-	if (grep {/xmm[0-7]\s*,/i} @out) {
-		grep {s/\.[3-7]86/\.686\n\t\.XMM/} @out;
-		}
-	elsif (grep {/mm[0-7]\s*,/i} @out) {
-		grep {s/\.[3-7]86/\.686\n\t\.MMX/} @out;
-		}
-	push(@out,"_TEXT\$	ENDS\n");
-	push(@out,"END\n");
-	}
-
-sub main'wparam
-	{
-	local($num)=@_;
-
-	return(&main'DWP($stack+$num*4,"esp","",0));
-	}
-
-sub main'swtmp
-	{
-	return(&main'DWP($_[0]*4,"esp","",0));
-	}
-
-# Should use swtmp, which is above esp.  Linix can trash the stack above esp
-#sub main'wtmp
-#	{
-#	local($num)=@_;
-#
-#	return(&main'DWP(-(($num+1)*4),"esp","",0));
-#	}
-
-sub main'comment
-	{
-	foreach (@_)
-		{
-		push(@out,"\t; $_\n");
-		}
-	}
-
-sub main'public_label
-	{
-	$label{$_[0]}="_$_[0]"	if (!defined($label{$_[0]}));
-	push(@out,"PUBLIC\t$label{$_[0]}\n");
-	}
-
-sub main'label
-	{
-	if (!defined($label{$_[0]}))
-		{
-		$label{$_[0]}="\$${label}${_[0]}";
-		$label++;
-		}
-	return($label{$_[0]});
-	}
-
-sub main'set_label
-	{
-	if (!defined($label{$_[0]}))
-		{
-		$label{$_[0]}="\$${label}${_[0]}";
-		$label++;
-		}
-	if ($_[1]!=0 && $_[1]>1)
-		{
-		main'align($_[1]);
-		}
-	if((defined $_[2]) && ($_[2] == 1))
-		{
-		push(@out,"$label{$_[0]}::\n");
-		}
-	elsif ($label{$_[0]} !~ /^\$/)
-		{
-		push(@out,"$label{$_[0]}\tLABEL PTR\n");
-		}
-	else
-		{
-		push(@out,"$label{$_[0]}:\n");
-		}
-	}
-
-sub main'data_byte
-	{
-	push(@out,"\tDB\t".join(',',@_)."\n");
-	}
-
-sub main'data_word
-	{
-	push(@out,"\tDD\t".join(',',@_)."\n");
-	}
-
-sub main'align
-	{
-	push(@out,"\tALIGN\t$_[0]\n");
-	}
-
-sub out1p
-	{
-	local($name,$p1)=@_;
-	local($l,$t);
-
-	push(@out,"\t$name\t".&conv($p1)."\n");
-	}
-
-sub main'picmeup
-	{
-	local($dst,$sym)=@_;
-	&main'lea($dst,&main'DWP($sym));
-	}
-
-sub main'blindpop { &out1("pop",@_); }
-
-sub main'initseg 
-	{
-	local($f)=@_;
-	local($tmp)=<<___;
-OPTION	DOTNAME
-.CRT\$XCU	SEGMENT DWORD PUBLIC 'DATA'
-EXTRN	_$f:NEAR
-DD	_$f
-.CRT\$XCU	ENDS
-___
-	push(@out,$tmp);
-	}
-
-1;
diff --git a/crypto/openssl/crypto/perlasm/x86nasm.pl b/crypto/openssl/crypto/perlasm/x86nasm.pl
deleted file mode 100644
index b6dfcbdf02c6..000000000000
--- a/crypto/openssl/crypto/perlasm/x86nasm.pl
+++ /dev/null
@@ -1,451 +0,0 @@
-#!/usr/local/bin/perl
-
-package x86nasm;
-
-$label="L000";
-$under=($main'netware)?'':'_';
-
-%lb=(	'eax',	'al',
-	'ebx',	'bl',
-	'ecx',	'cl',
-	'edx',	'dl',
-	'ax',	'al',
-	'bx',	'bl',
-	'cx',	'cl',
-	'dx',	'dl',
-	);
-
-%hb=(	'eax',	'ah',
-	'ebx',	'bh',
-	'ecx',	'ch',
-	'edx',	'dh',
-	'ax',	'ah',
-	'bx',	'bh',
-	'cx',	'ch',
-	'dx',	'dh',
-	);
-
-sub main'asm_init_output { @out=(); }
-sub main'asm_get_output { return(@out); }
-sub main'get_labels { return(@labels); }
-
-sub main'external_label
-{
-	push(@labels,@_);
-	foreach (@_) {
-		push(@out,".") if ($main'mwerks);
-		push(@out, "extern\t${under}$_\n");
-	}
-}
-
-sub main'LB
-	{
-	(defined($lb{$_[0]})) || die "$_[0] does not have a 'low byte'\n";
-	return($lb{$_[0]});
-	}
-
-sub main'HB
-	{
-	(defined($hb{$_[0]})) || die "$_[0] does not have a 'high byte'\n";
-	return($hb{$_[0]});
-	}
-
-sub main'BP
-	{
-	&get_mem("BYTE",@_);
-	}
-
-sub main'DWP
-	{
-	&get_mem("DWORD",@_);
-	}
-
-sub main'QWP
-	{
-	&get_mem("",@_);
-	}
-
-sub main'BC
-	{
-	return (($main'mwerks)?"":"BYTE ")."@_";
-	}
-
-sub main'DWC
-	{
-	return (($main'mwerks)?"":"DWORD ")."@_";
-	}
-
-sub main'stack_push
-	{
-	my($num)=@_;
-	$stack+=$num*4;
-	&main'sub("esp",$num*4);
-	}
-
-sub main'stack_pop
-	{
-	my($num)=@_;
-	$stack-=$num*4;
-	&main'add("esp",$num*4);
-	}
-
-sub get_mem
-	{
-	my($size,$addr,$reg1,$reg2,$idx)=@_;
-	my($t,$post);
-	my($ret)=$size;
-	if ($ret ne "")
-		{
-		$ret .= " PTR" if ($main'mwerks);
-		$ret .= " ";
-		}
-	$ret .= "[";
-	$addr =~ s/^\s+//;
-	if ($addr =~ /^(.+)\+(.+)$/)
-		{
-		$reg2=&conv($1);
-		$addr="$under$2";
-		}
-	elsif ($addr =~ /^[_a-z][_a-z0-9]*$/i)
-		{
-		$addr="$under$addr";
-		}
-
-	if ($addr =~ /^.+\-.+$/) { $addr="($addr)"; }
-
-	$reg1="$regs{$reg1}" if defined($regs{$reg1});
-	$reg2="$regs{$reg2}" if defined($regs{$reg2});
-	if (($addr ne "") && ($addr ne 0))
-		{
-		if ($addr !~ /^-/)
-			{ $ret.="${addr}+"; }
-		else	{ $post=$addr; }
-		}
-	if ($reg2 ne "")
-		{
-		$t="";
-		$t="*$idx" if ($idx != 0);
-		$reg1="+".$reg1 if ("$reg1$post" ne "");
-		$ret.="$reg2$t$reg1$post]";
-		}
-	else
-		{
-		$ret.="$reg1$post]"
-		}
-	$ret =~ s/\+\]/]/; # in case $addr was the only argument
-	return($ret);
-	}
-
-sub main'mov	{ &out2("mov",@_); }
-sub main'movb	{ &out2("mov",@_); }
-sub main'and	{ &out2("and",@_); }
-sub main'or	{ &out2("or",@_); }
-sub main'shl	{ &out2("shl",@_); }
-sub main'shr	{ &out2("shr",@_); }
-sub main'xor	{ &out2("xor",@_); }
-sub main'xorb	{ &out2("xor",@_); }
-sub main'add	{ &out2("add",@_); }
-sub main'adc	{ &out2("adc",@_); }
-sub main'sub	{ &out2("sub",@_); }
-sub main'sbb	{ &out2("sbb",@_); }
-sub main'rotl	{ &out2("rol",@_); }
-sub main'rotr	{ &out2("ror",@_); }
-sub main'exch	{ &out2("xchg",@_); }
-sub main'cmp	{ &out2("cmp",@_); }
-sub main'lea	{ &out2("lea",@_); }
-sub main'mul	{ &out1("mul",@_); }
-sub main'div	{ &out1("div",@_); }
-sub main'dec	{ &out1("dec",@_); }
-sub main'inc	{ &out1("inc",@_); }
-sub main'jmp	{ &out1("jmp",@_); }
-sub main'jmp_ptr { &out1p("jmp",@_); }
-
-# This is a bit of a kludge: declare all branches as NEAR.
-$near=($main'mwerks)?'':'NEAR';
-sub main'je	{ &out1("je $near",@_); }
-sub main'jle	{ &out1("jle $near",@_); }
-sub main'jz	{ &out1("jz $near",@_); }
-sub main'jge	{ &out1("jge $near",@_); }
-sub main'jl	{ &out1("jl $near",@_); }
-sub main'ja	{ &out1("ja $near",@_); }
-sub main'jae	{ &out1("jae $near",@_); }
-sub main'jb	{ &out1("jb $near",@_); }
-sub main'jbe	{ &out1("jbe $near",@_); }
-sub main'jc	{ &out1("jc $near",@_); }
-sub main'jnc	{ &out1("jnc $near",@_); }
-sub main'jnz	{ &out1("jnz $near",@_); }
-sub main'jne	{ &out1("jne $near",@_); }
-sub main'jno	{ &out1("jno $near",@_); }
-
-sub main'push	{ &out1("push",@_); $stack+=4; }
-sub main'pop	{ &out1("pop",@_); $stack-=4; }
-sub main'pushf	{ &out0("pushfd"); $stack+=4; }
-sub main'popf	{ &out0("popfd"); $stack-=4; }
-sub main'bswap	{ &out1("bswap",@_); &using486(); }
-sub main'not	{ &out1("not",@_); }
-sub main'call	{ &out1("call",($_[0]=~/^\@L/?'':$under).$_[0]); }
-sub main'call_ptr { &out1p("call",@_); }
-sub main'ret	{ &out0("ret"); }
-sub main'nop	{ &out0("nop"); }
-sub main'test	{ &out2("test",@_); }
-sub main'bt	{ &out2("bt",@_); }
-sub main'leave	{ &out0("leave"); }
-sub main'cpuid	{ &out0("cpuid"); }
-sub main'rdtsc	{ &out0("rdtsc"); }
-sub main'halt	{ &out0("hlt"); }
-sub main'movz	{ &out2("movzx",@_); }
-sub main'neg	{ &out1("neg",@_); }
-sub main'cld	{ &out0("cld"); }
-
-# SSE2
-sub main'emms	{ &out0("emms"); }
-sub main'movd	{ &out2("movd",@_); }
-sub main'movq	{ &out2("movq",@_); }
-sub main'movdqu	{ &out2("movdqu",@_); }
-sub main'movdqa	{ &out2("movdqa",@_); }
-sub main'movdq2q{ &out2("movdq2q",@_); }
-sub main'movq2dq{ &out2("movq2dq",@_); }
-sub main'paddq	{ &out2("paddq",@_); }
-sub main'pmuludq{ &out2("pmuludq",@_); }
-sub main'psrlq	{ &out2("psrlq",@_); }
-sub main'psllq	{ &out2("psllq",@_); }
-sub main'pxor	{ &out2("pxor",@_); }
-sub main'por	{ &out2("por",@_); }
-sub main'pand	{ &out2("pand",@_); }
-
-sub out2
-	{
-	my($name,$p1,$p2)=@_;
-	my($l,$t);
-
-	push(@out,"\t$name\t");
-	if (!$main'mwerks and $name eq "lea")
-		{
-		$p1 =~ s/^[^\[]*\[/\[/;
-		$p2 =~ s/^[^\[]*\[/\[/;
-		}
-	$t=&conv($p1).",";
-	$l=length($t);
-	push(@out,$t);
-	$l=4-($l+9)/8;
-	push(@out,"\t" x $l);
-	push(@out,&conv($p2));
-	push(@out,"\n");
-	}
-
-sub out0
-	{
-	my($name)=@_;
-
-	push(@out,"\t$name\n");
-	}
-
-sub out1
-	{
-	my($name,$p1)=@_;
-	my($l,$t);
-	push(@out,"\t$name\t".&conv($p1)."\n");
-	}
-
-sub conv
-	{
-	my($p)=@_;
-	$p =~ s/0x([0-9A-Fa-f]+)/0$1h/;
-	return $p;
-	}
-
-sub using486
-	{
-	return if $using486;
-	$using486++;
-	grep(s/\.386/\.486/,@out);
-	}
-
-sub main'file
-	{
-	if ($main'mwerks)	{ push(@out,".section\t.text\n"); }
-	else	{
-		local $tmp=<<___;
-%ifdef __omf__
-section	code	use32 class=code
-%else
-section	.text
-%endif
-___
-		push(@out,$tmp);
-		}
-	}
-
-sub main'function_begin
-	{
-	my($func,$extra)=@_;
-
-	push(@labels,$func);
-	my($tmp)=<<"EOF";
-global	$under$func
-$under$func:
-	push	ebp
-	push	ebx
-	push	esi
-	push	edi
-EOF
-	push(@out,$tmp);
-	$stack=20;
-	}
-
-sub main'function_begin_B
-	{
-	my($func,$extra)=@_;
-	my($tmp)=<<"EOF";
-global	$under$func
-$under$func:
-EOF
-	push(@out,$tmp);
-	$stack=4;
-	}
-
-sub main'function_end
-	{
-	my($func)=@_;
-
-	my($tmp)=<<"EOF";
-	pop	edi
-	pop	esi
-	pop	ebx
-	pop	ebp
-	ret
-EOF
-	push(@out,$tmp);
-	$stack=0;
-	%label=();
-	}
-
-sub main'function_end_B
-	{
-	$stack=0;
-	%label=();
-	}
-
-sub main'function_end_A
-	{
-	my($func)=@_;
-
-	my($tmp)=<<"EOF";
-	pop	edi
-	pop	esi
-	pop	ebx
-	pop	ebp
-	ret
-EOF
-	push(@out,$tmp);
-	}
-
-sub main'file_end
-	{
-	}
-
-sub main'wparam
-	{
-	my($num)=@_;
-
-	return(&main'DWP($stack+$num*4,"esp","",0));
-	}
-
-sub main'swtmp
-	{
-	return(&main'DWP($_[0]*4,"esp","",0));
-	}
-
-# Should use swtmp, which is above esp.  Linix can trash the stack above esp
-#sub main'wtmp
-#	{
-#	my($num)=@_;
-#
-#	return(&main'DWP(-(($num+1)*4),"esp","",0));
-#	}
-
-sub main'comment
-	{
-	foreach (@_)
-		{
-		push(@out,"\t; $_\n");
-		}
-	}
-
-sub main'public_label
-	{
-	$label{$_[0]}="${under}${_[0]}"	if (!defined($label{$_[0]}));
-	push(@out,"global\t$label{$_[0]}\n");
-	}
-
-sub main'label
-	{
-	if (!defined($label{$_[0]}))
-		{
-		$label{$_[0]}="\@${label}${_[0]}";
-		$label++;
-		}
-	return($label{$_[0]});
-	}
-
-sub main'set_label
-	{
-	if (!defined($label{$_[0]}))
-		{
-		$label{$_[0]}="\@${label}${_[0]}";
-		$label++;
-		}
-	if ($_[1]!=0 && $_[1]>1)
-		{
-		main'align($_[1]);
-		}
-	push(@out,"$label{$_[0]}:\n");
-	}
-
-sub main'data_byte
-	{
-	push(@out,(($main'mwerks)?".byte\t":"DB\t").join(',',@_)."\n");
-	}
-
-sub main'data_word
-	{
-	push(@out,(($main'mwerks)?".long\t":"DD\t").join(',',@_)."\n");
-	}
-
-sub main'align
-	{
-	push(@out,".") if ($main'mwerks);
-	push(@out,"align\t$_[0]\n");
-	}
-
-sub out1p
-	{
-	my($name,$p1)=@_;
-	my($l,$t);
-
-	push(@out,"\t$name\t".&conv($p1)."\n");
-	}
-
-sub main'picmeup
-	{
-	local($dst,$sym)=@_;
-	&main'lea($dst,&main'DWP($sym));
-	}
-
-sub main'blindpop { &out1("pop",@_); }
-
-sub main'initseg
-	{
-	local($f)=@_;
-	if ($main'win32)
-		{
-		local($tmp)=<<___;
-segment	.CRT\$XCU data
-extern	$under$f
-DD	$under$f
-___
-		push(@out,$tmp);
-		}
-	}
-
-1;
diff --git a/crypto/openssl/crypto/perlasm/x86unix.pl b/crypto/openssl/crypto/perlasm/x86unix.pl
deleted file mode 100644
index e71050b6bcb5..000000000000
--- a/crypto/openssl/crypto/perlasm/x86unix.pl
+++ /dev/null
@@ -1,761 +0,0 @@
-#!/usr/local/bin/perl
-
-package x86unix;	# GAS actually...
-
-$label="L000";
-$const="";
-$constl=0;
-
-$align=($main'aout)?"4":"16";
-$under=($main'aout or $main'coff)?"_":"";
-$dot=($main'aout)?"":".";
-$com_start="#" if ($main'aout or $main'coff);
-
-sub main'asm_init_output { @out=(); }
-sub main'asm_get_output { return(@out); }
-sub main'get_labels { return(@labels); }
-sub main'external_label { push(@labels,@_); }
-
-if ($main'cpp)
-	{
-	$align="ALIGN";
-	$under="";
-	$com_start='/*';
-	$com_end='*/';
-	}
-
-%lb=(	'eax',	'%al',
-	'ebx',	'%bl',
-	'ecx',	'%cl',
-	'edx',	'%dl',
-	'ax',	'%al',
-	'bx',	'%bl',
-	'cx',	'%cl',
-	'dx',	'%dl',
-	);
-
-%hb=(	'eax',	'%ah',
-	'ebx',	'%bh',
-	'ecx',	'%ch',
-	'edx',	'%dh',
-	'ax',	'%ah',
-	'bx',	'%bh',
-	'cx',	'%ch',
-	'dx',	'%dh',
-	);
-
-%regs=(	'eax',	'%eax',
-	'ebx',	'%ebx',
-	'ecx',	'%ecx',
-	'edx',	'%edx',
-	'esi',	'%esi',
-	'edi',	'%edi',
-	'ebp',	'%ebp',
-	'esp',	'%esp',
-
-	'mm0',	'%mm0',
-	'mm1',	'%mm1',
-	'mm2',	'%mm2',
-	'mm3',	'%mm3',
-	'mm4',	'%mm4',
-	'mm5',	'%mm5',
-	'mm6',	'%mm6',
-	'mm7',	'%mm7',
-
-	'xmm0',	'%xmm0',
-	'xmm1',	'%xmm1',
-	'xmm2',	'%xmm2',
-	'xmm3',	'%xmm3',
-	'xmm4',	'%xmm4',
-	'xmm5',	'%xmm5',
-	'xmm6',	'%xmm6',
-	'xmm7',	'%xmm7',
-	);
-
-%reg_val=(
-	'eax',	0x00,
-	'ebx',	0x03,
-	'ecx',	0x01,
-	'edx',	0x02,
-	'esi',	0x06,
-	'edi',	0x07,
-	'ebp',	0x05,
-	'esp',	0x04,
-	);
-
-sub main'LB
-	{
-	(defined($lb{$_[0]})) || die "$_[0] does not have a 'low byte'\n";
-	return($lb{$_[0]});
-	}
-
-sub main'HB
-	{
-	(defined($hb{$_[0]})) || die "$_[0] does not have a 'high byte'\n";
-	return($hb{$_[0]});
-	}
-
-sub main'DWP
-	{
-	local($addr,$reg1,$reg2,$idx)=@_;
-
-	$ret="";
-	$addr =~ s/(^|[+ \t])([A-Za-z_]+[A-Za-z0-9_]+)($|[+ \t])/$1$under$2$3/;
-	$reg1="$regs{$reg1}" if defined($regs{$reg1});
-	$reg2="$regs{$reg2}" if defined($regs{$reg2});
-	$ret.=$addr if ($addr ne "") && ($addr ne 0);
-	if ($reg2 ne "")
-		{
-		if($idx ne "" && $idx != 0)
-		    { $ret.="($reg1,$reg2,$idx)"; }
-		else
-		    { $ret.="($reg1,$reg2)"; }
-	        }
-	elsif ($reg1 ne "")
-		{ $ret.="($reg1)" }
-	return($ret);
-	}
-
-sub main'QWP
-	{
-	return(&main'DWP(@_));
-	}
-
-sub main'BP
-	{
-	return(&main'DWP(@_));
-	}
-
-sub main'BC
-	{
-	return @_;
-	}
-
-sub main'DWC
-	{
-	return @_;
-	}
-
-#sub main'BP
-#	{
-#	local($addr,$reg1,$reg2,$idx)=@_;
-#
-#	$ret="";
-#
-#	$addr =~ s/(^|[+ \t])([A-Za-z_]+)($|[+ \t])/$1$under$2$3/;
-#	$reg1="$regs{$reg1}" if defined($regs{$reg1});
-#	$reg2="$regs{$reg2}" if defined($regs{$reg2});
-#	$ret.=$addr if ($addr ne "") && ($addr ne 0);
-#	if ($reg2 ne "")
-#		{ $ret.="($reg1,$reg2,$idx)"; }
-#	else
-#		{ $ret.="($reg1)" }
-#	return($ret);
-#	}
-
-sub main'mov	{ &out2("movl",@_); }
-sub main'movb	{ &out2("movb",@_); }
-sub main'and	{ &out2("andl",@_); }
-sub main'or	{ &out2("orl",@_); }
-sub main'shl	{ &out2("sall",@_); }
-sub main'shr	{ &out2("shrl",@_); }
-sub main'xor	{ &out2("xorl",@_); }
-sub main'xorb	{ &out2("xorb",@_); }
-sub main'add	{ &out2($_[0]=~/%[a-d][lh]/?"addb":"addl",@_); }
-sub main'adc	{ &out2("adcl",@_); }
-sub main'sub	{ &out2("subl",@_); }
-sub main'sbb	{ &out2("sbbl",@_); }
-sub main'rotl	{ &out2("roll",@_); }
-sub main'rotr	{ &out2("rorl",@_); }
-sub main'exch	{ &out2($_[0]=~/%[a-d][lh]/?"xchgb":"xchgl",@_); }
-sub main'cmp	{ &out2("cmpl",@_); }
-sub main'lea	{ &out2("leal",@_); }
-sub main'mul	{ &out1("mull",@_); }
-sub main'div	{ &out1("divl",@_); }
-sub main'jmp	{ &out1("jmp",@_); }
-sub main'jmp_ptr { &out1p("jmp",@_); }
-sub main'je	{ &out1("je",@_); }
-sub main'jle	{ &out1("jle",@_); }
-sub main'jne	{ &out1("jne",@_); }
-sub main'jnz	{ &out1("jnz",@_); }
-sub main'jz	{ &out1("jz",@_); }
-sub main'jge	{ &out1("jge",@_); }
-sub main'jl	{ &out1("jl",@_); }
-sub main'ja	{ &out1("ja",@_); }
-sub main'jae	{ &out1("jae",@_); }
-sub main'jb	{ &out1("jb",@_); }
-sub main'jbe	{ &out1("jbe",@_); }
-sub main'jc	{ &out1("jc",@_); }
-sub main'jnc	{ &out1("jnc",@_); }
-sub main'jno	{ &out1("jno",@_); }
-sub main'dec	{ &out1("decl",@_); }
-sub main'inc	{ &out1($_[0]=~/%[a-d][hl]/?"incb":"incl",@_); }
-sub main'push	{ &out1("pushl",@_); $stack+=4; }
-sub main'pop	{ &out1("popl",@_); $stack-=4; }
-sub main'pushf	{ &out0("pushfl"); $stack+=4; }
-sub main'popf	{ &out0("popfl"); $stack-=4; }
-sub main'not	{ &out1("notl",@_); }
-sub main'call	{	my $pre=$under;
-			foreach $i (%label)
-			{ if ($label{$i} eq $_[0]) { $pre=''; last; } }
-			&out1("call",$pre.$_[0]);
-		}
-sub main'call_ptr { &out1p("call",@_); }
-sub main'ret	{ &out0("ret"); }
-sub main'nop	{ &out0("nop"); }
-sub main'test	{ &out2("testl",@_); }
-sub main'bt	{ &out2("btl",@_); }
-sub main'leave	{ &out0("leave"); }
-sub main'cpuid	{ &out0(".byte\t0x0f,0xa2"); }
-sub main'rdtsc	{ &out0(".byte\t0x0f,0x31"); }
-sub main'halt	{ &out0("hlt"); }
-sub main'movz	{ &out2("movzbl",@_); }
-sub main'neg	{ &out1("negl",@_); }
-sub main'cld	{ &out0("cld"); }
-
-# SSE2
-sub main'emms	{ &out0("emms"); }
-sub main'movd	{ &out2("movd",@_); }
-sub main'movdqu	{ &out2("movdqu",@_); }
-sub main'movdqa	{ &out2("movdqa",@_); }
-sub main'movdq2q{ &out2("movdq2q",@_); }
-sub main'movq2dq{ &out2("movq2dq",@_); }
-sub main'paddq	{ &out2("paddq",@_); }
-sub main'pmuludq{ &out2("pmuludq",@_); }
-sub main'psrlq	{ &out2("psrlq",@_); }
-sub main'psllq	{ &out2("psllq",@_); }
-sub main'pxor	{ &out2("pxor",@_); }
-sub main'por	{ &out2("por",@_); }
-sub main'pand	{ &out2("pand",@_); }
-sub main'movq	{
-	local($p1,$p2,$optimize)=@_;
-	if ($optimize && $p1=~/^mm[0-7]$/ && $p2=~/^mm[0-7]$/)
-		# movq between mmx registers can sink Intel CPUs
-		{	push(@out,"\tpshufw\t\$0xe4,%$p2,%$p1\n");	}
-	else	{	&out2("movq",@_);				}
-	}
-
-# The bswapl instruction is new for the 486. Emulate if i386.
-sub main'bswap
-	{
-	if ($main'i386)
-		{
-		&main'comment("bswapl @_");
-		&main'exch(main'HB(@_),main'LB(@_));
-		&main'rotr(@_,16);
-		&main'exch(main'HB(@_),main'LB(@_));
-		}
-	else
-		{
-		&out1("bswapl",@_);
-		}
-	}
-
-sub out2
-	{
-	local($name,$p1,$p2)=@_;
-	local($l,$ll,$t);
-	local(%special)=(	"roll",0xD1C0,"rorl",0xD1C8,
-				"rcll",0xD1D0,"rcrl",0xD1D8,
-				"shll",0xD1E0,"shrl",0xD1E8,
-				"sarl",0xD1F8);
-	
-	if ((defined($special{$name})) && defined($regs{$p1}) && ($p2 == 1))
-		{
-		$op=$special{$name}|$reg_val{$p1};
-		$tmp1=sprintf(".byte %d\n",($op>>8)&0xff);
-		$tmp2=sprintf(".byte %d\t",$op     &0xff);
-		push(@out,$tmp1);
-		push(@out,$tmp2);
-
-		$p2=&conv($p2);
-		$p1=&conv($p1);
-		&main'comment("$name $p2 $p1");
-		return;
-		}
-
-	push(@out,"\t$name\t");
-	$t=&conv($p2).",";
-	$l=length($t);
-	push(@out,$t);
-	$ll=4-($l+9)/8;
-	$tmp1=sprintf("\t" x $ll);
-	push(@out,$tmp1);
-	push(@out,&conv($p1)."\n");
-	}
-
-sub out1
-	{
-	local($name,$p1)=@_;
-	local($l,$t);
-	local(%special)=("bswapl",0x0FC8);
-
-	if ((defined($special{$name})) && defined($regs{$p1}))
-		{
-		$op=$special{$name}|$reg_val{$p1};
-		$tmp1=sprintf(".byte %d\n",($op>>8)&0xff);
-		$tmp2=sprintf(".byte %d\t",$op     &0xff);
-		push(@out,$tmp1);
-		push(@out,$tmp2);
-
-		$p2=&conv($p2);
-		$p1=&conv($p1);
-		&main'comment("$name $p2 $p1");
-		return;
-		}
-
-	push(@out,"\t$name\t".&conv($p1)."\n");
-	}
-
-sub out1p
-	{
-	local($name,$p1)=@_;
-	local($l,$t);
-
-	push(@out,"\t$name\t*".&conv($p1)."\n");
-	}
-
-sub out0
-	{
-	push(@out,"\t$_[0]\n");
-	}
-
-sub conv
-	{
-	local($p)=@_;
-
-#	$p =~ s/0x([0-9A-Fa-f]+)/0$1h/;
-
-	$p=$regs{$p} if (defined($regs{$p}));
-
-	$p =~ s/^(-{0,1}[0-9A-Fa-f]+)$/\$$1/;
-	$p =~ s/^(0x[0-9A-Fa-f]+)$/\$$1/;
-	return $p;
-	}
-
-sub main'file
-	{
-	local($file)=@_;
-
-	local($tmp)=<<"EOF";
-	.file	"$file.s"
-EOF
-	push(@out,$tmp);
-	}
-
-sub main'function_begin
-	{
-	local($func)=@_;
-
-	&main'external_label($func);
-	$func=$under.$func;
-
-	local($tmp)=<<"EOF";
-.text
-.globl	$func
-EOF
-	push(@out,$tmp);
-	if ($main'cpp)
-		{ $tmp=push(@out,"TYPE($func,\@function)\n"); }
-	elsif ($main'coff)
-		{ $tmp=push(@out,".def\t$func;\t.scl\t2;\t.type\t32;\t.endef\n"); }
-	elsif ($main'aout and !$main'pic)
-		{ }
-	else	{ $tmp=push(@out,".type\t$func,\@function\n"); }
-	push(@out,".align\t$align\n");
-	push(@out,"$func:\n");
-	$tmp=<<"EOF";
-	pushl	%ebp
-	pushl	%ebx
-	pushl	%esi
-	pushl	%edi
-
-EOF
-	push(@out,$tmp);
-	$stack=20;
-	}
-
-sub main'function_begin_B
-	{
-	local($func,$extra)=@_;
-
-	&main'external_label($func);
-	$func=$under.$func;
-
-	local($tmp)=<<"EOF";
-.text
-.globl	$func
-EOF
-	push(@out,$tmp);
-	if ($main'cpp)
-		{ push(@out,"TYPE($func,\@function)\n"); }
-	elsif ($main'coff)
-		{ $tmp=push(@out,".def\t$func;\t.scl\t2;\t.type\t32;\t.endef\n"); }
-	elsif ($main'aout and !$main'pic)
-		{ }
-	else	{ push(@out,".type	$func,\@function\n"); }
-	push(@out,".align\t$align\n");
-	push(@out,"$func:\n");
-	$stack=4;
-	}
-
-sub main'function_end
-	{
-	local($func)=@_;
-
-	$func=$under.$func;
-
-	local($tmp)=<<"EOF";
-	popl	%edi
-	popl	%esi
-	popl	%ebx
-	popl	%ebp
-	ret
-${dot}L_${func}_end:
-EOF
-	push(@out,$tmp);
-
-	if ($main'cpp)
-		{ push(@out,"SIZE($func,${dot}L_${func}_end-$func)\n"); }
-	elsif ($main'coff or $main'aout)
-                { }
-	else	{ push(@out,".size\t$func,${dot}L_${func}_end-$func\n"); }
-	push(@out,".ident	\"$func\"\n");
-	$stack=0;
-	%label=();
-	}
-
-sub main'function_end_A
-	{
-	local($func)=@_;
-
-	local($tmp)=<<"EOF";
-	popl	%edi
-	popl	%esi
-	popl	%ebx
-	popl	%ebp
-	ret
-EOF
-	push(@out,$tmp);
-	}
-
-sub main'function_end_B
-	{
-	local($func)=@_;
-
-	$func=$under.$func;
-
-	push(@out,"${dot}L_${func}_end:\n");
-	if ($main'cpp)
-		{ push(@out,"SIZE($func,${dot}L_${func}_end-$func)\n"); }
-        elsif ($main'coff or $main'aout)
-                { }
-	else	{ push(@out,".size\t$func,${dot}L_${func}_end-$func\n"); }
-	push(@out,".ident	\"$func\"\n");
-	$stack=0;
-	%label=();
-	}
-
-sub main'wparam
-	{
-	local($num)=@_;
-
-	return(&main'DWP($stack+$num*4,"esp","",0));
-	}
-
-sub main'stack_push
-	{
-	local($num)=@_;
-	$stack+=$num*4;
-	&main'sub("esp",$num*4);
-	}
-
-sub main'stack_pop
-	{
-	local($num)=@_;
-	$stack-=$num*4;
-	&main'add("esp",$num*4);
-	}
-
-sub main'swtmp
-	{
-	return(&main'DWP($_[0]*4,"esp","",0));
-	}
-
-# Should use swtmp, which is above esp.  Linix can trash the stack above esp
-#sub main'wtmp
-#	{
-#	local($num)=@_;
-#
-#	return(&main'DWP(-($num+1)*4,"esp","",0));
-#	}
-
-sub main'comment
-	{
-	if (!defined($com_start) or $main'elf)
-		{	# Regarding $main'elf above...
-			# GNU and SVR4 as'es use different comment delimiters,
-		push(@out,"\n");	# so we just skip ELF comments...
-		return;
-		}
-	foreach (@_)
-		{
-		if (/^\s*$/)
-			{ push(@out,"\n"); }
-		else
-			{ push(@out,"\t$com_start $_ $com_end\n"); }
-		}
-	}
-
-sub main'public_label
-	{
-	$label{$_[0]}="${under}${_[0]}"	if (!defined($label{$_[0]}));
-	push(@out,".globl\t$label{$_[0]}\n");
-	}
-
-sub main'label
-	{
-	if (!defined($label{$_[0]}))
-		{
-		$label{$_[0]}="${dot}${label}${_[0]}";
-		$label++;
-		}
-	return($label{$_[0]});
-	}
-
-sub main'set_label
-	{
-	if (!defined($label{$_[0]}))
-		{
-		$label{$_[0]}="${dot}${label}${_[0]}";
-		$label++;
-		}
-	if ($_[1]!=0)
-		{
-		if ($_[1]>1)	{ main'align($_[1]);		}
-		else		{ push(@out,".align $align\n");	}
-		}
-	push(@out,"$label{$_[0]}:\n");
-	}
-
-sub main'file_end
-	{
-	# try to detect if SSE2 or MMX extensions were used on ELF platform...
-	if ($main'elf && grep {/%[x]*mm[0-7]/i} @out) {
-		local($tmp);
-
-		push (@out,"\n.section\t.bss\n");
-		push (@out,".comm\t${under}OPENSSL_ia32cap_P,4,4\n");
-
-		push (@out,".section\t.init\n");
-		# One can argue that it's wasteful to craft every
-		# SSE/MMX module with this snippet... Well, it's 72
-		# bytes long and for the moment we have two modules.
-		# Let's argue when we have 7 modules or so...
-		#
-		# $1<<10 sets a reserved bit to signal that variable
-		# was initialized already...
-		&main'picmeup("edx","OPENSSL_ia32cap_P");
-		$tmp=<<___;
-		cmpl	\$0,(%edx)
-		jne	1f
-		movl	\$1<<10,(%edx)
-		pushf
-		popl	%eax
-		movl	%eax,%ecx
-		xorl	\$1<<21,%eax
-		pushl	%eax
-		popf
-		pushf
-		popl	%eax
-		xorl	%ecx,%eax
-		btl	\$21,%eax
-		jnc	1f
-		pushl	%edi
-		pushl	%ebx
-		movl	%edx,%edi
-		movl	\$1,%eax
-		.byte	0x0f,0xa2
-		orl	\$1<<10,%edx
-		movl	%edx,0(%edi)
-		popl	%ebx
-		popl	%edi
-		jmp	1f
-	.align	$align
-	1:
-___
-		push (@out,$tmp);
-	}
-
-	if ($const ne "")
-		{
-		push(@out,".section .rodata\n");
-		push(@out,$const);
-		$const="";
-		}
-	}
-
-sub main'data_byte
-	{
-	push(@out,"\t.byte\t".join(',',@_)."\n");
-	}
-
-sub main'data_word
-	{
-	push(@out,"\t.long\t".join(',',@_)."\n");
-	}
-
-sub main'align
-	{
-	my $val=$_[0],$p2,$i;
-	if ($main'aout) {
-		for ($p2=0;$val!=0;$val>>=1) { $p2++; }
-		$val=$p2-1;
-		$val.=",0x90";
-	}
-	push(@out,".align\t$val\n");
-	}
-
-# debug output functions: puts, putx, printf
-
-sub main'puts
-	{
-	&pushvars();
-	&main'push('$Lstring' . ++$constl);
-	&main'call('puts');
-	$stack-=4;
-	&main'add("esp",4);
-	&popvars();
-
-	$const .= "Lstring$constl:\n\t.string \"@_[0]\"\n";
-	}
-
-sub main'putx
-	{
-	&pushvars();
-	&main'push($_[0]);
-	&main'push('$Lstring' . ++$constl);
-	&main'call('printf');
-	&main'add("esp",8);
-	$stack-=8;
-	&popvars();
-
-	$const .= "Lstring$constl:\n\t.string \"\%X\"\n";
-	}
-
-sub main'printf
-	{
-	$ostack = $stack;
-	&pushvars();
-	for ($i = @_ - 1; $i >= 0; $i--)
-		{
-		if ($i == 0) # change this to support %s format strings
-			{
-			&main'push('$Lstring' . ++$constl);
-			$const .= "Lstring$constl:\n\t.string \"@_[$i]\"\n";
-			}
-		else
-			{
-			if ($_[$i] =~ /([0-9]*)\(%esp\)/)
-				{
-				&main'push(($1 + $stack - $ostack) . '(%esp)');
-				}
-			else
-				{
-				&main'push($_[$i]);
-				}
-			}
-		}
-	&main'call('printf');
-	$stack-=4*@_;
-	&main'add("esp",4*@_);
-	&popvars();
-	}
-
-sub pushvars
-	{
-	&main'pushf();
-	&main'push("edx");
-	&main'push("ecx");
-	&main'push("eax");
-	}
-
-sub popvars
-	{
-	&main'pop("eax");
-	&main'pop("ecx");
-	&main'pop("edx");
-	&main'popf();
-	}
-
-sub main'picmeup
-	{
-	local($dst,$sym)=@_;
-	if ($main'cpp)
-		{
-		local($tmp)=<<___;
-#if (defined(ELF) || defined(SOL)) && defined(PIC)
-	call	1f
-1:	popl	$regs{$dst}
-	addl	\$_GLOBAL_OFFSET_TABLE_+[.-1b],$regs{$dst}
-	movl	$sym\@GOT($regs{$dst}),$regs{$dst}
-#else
-	leal	$sym,$regs{$dst}
-#endif
-___
-		push(@out,$tmp);
-		}
-	elsif ($main'pic && ($main'elf || $main'aout))
-		{
-		&main'call(&main'label("PIC_me_up"));
-		&main'set_label("PIC_me_up");
-		&main'blindpop($dst);
-		&main'add($dst,"\$${under}_GLOBAL_OFFSET_TABLE_+[.-".
-				&main'label("PIC_me_up") . "]");
-		&main'mov($dst,&main'DWP($under.$sym."\@GOT",$dst));
-		}
-	else
-		{
-		&main'lea($dst,&main'DWP($sym));
-		}
-	}
-
-sub main'blindpop { &out1("popl",@_); }
-
-sub main'initseg
-	{
-	local($f)=@_;
-	local($tmp);
-	if ($main'elf)
-		{
-		$tmp=<<___;
-.section	.init
-	call	$under$f
-	jmp	.Linitalign
-.align	$align
-.Linitalign:
-___
-		}
-	elsif ($main'coff)
-		{
-		$tmp=<<___;	# applies to both Cygwin and Mingw
-.section	.ctors
-.long	$under$f
-___
-		}
-	elsif ($main'aout)
-		{
-		local($ctor)="${under}_GLOBAL_\$I\$$f";
-		$tmp=".text\n";
-		$tmp.=".type	$ctor,\@function\n" if ($main'pic);
-		$tmp.=<<___;	# OpenBSD way...
-.globl	$ctor
-.align	2
-$ctor:
-	jmp	$under$f
-___
-		}
-	push(@out,$tmp) if ($tmp);
-	}
-
-1;
diff --git a/crypto/openssl/crypto/pkcs12/Makefile b/crypto/openssl/crypto/pkcs12/Makefile
deleted file mode 100644
index 3a7498fe7ad9..000000000000
--- a/crypto/openssl/crypto/pkcs12/Makefile
+++ /dev/null
@@ -1,286 +0,0 @@
-#
-# OpenSSL/crypto/pkcs12/Makefile
-#
-
-DIR=	pkcs12
-TOP=	../..
-CC=	cc
-INCLUDES= -I.. -I$(TOP) -I../../include
-CFLAG=-g
-MAKEFILE=	Makefile
-AR=		ar r
-
-CFLAGS= $(INCLUDES) $(CFLAG)
-
-GENERAL=Makefile
-TEST=
-APPS=
-
-LIB=$(TOP)/libcrypto.a
-LIBSRC= p12_add.c p12_asn.c p12_attr.c p12_crpt.c p12_crt.c p12_decr.c \
-	p12_init.c p12_key.c p12_kiss.c p12_mutl.c\
-	p12_utl.c p12_npas.c pk12err.c p12_p8d.c p12_p8e.c
-LIBOBJ= p12_add.o p12_asn.o p12_attr.o p12_crpt.o p12_crt.o p12_decr.o \
-	p12_init.o p12_key.o p12_kiss.o p12_mutl.o\
-	p12_utl.o p12_npas.o pk12err.o p12_p8d.o p12_p8e.o
-
-SRC= $(LIBSRC)
-
-EXHEADER=  pkcs12.h
-HEADER=	$(EXHEADER)
-
-ALL=    $(GENERAL) $(SRC) $(HEADER)
-
-top:
-	(cd ../..; $(MAKE) DIRS=crypto SDIRS=$(DIR) sub_all)
-
-test:
-
-all:	lib
-
-lib:	$(LIBOBJ)
-	$(AR) $(LIB) $(LIBOBJ)
-	$(RANLIB) $(LIB) || echo Never mind.
-	@touch lib
-
-files:
-	$(PERL) $(TOP)/util/files.pl Makefile >> $(TOP)/MINFO
-
-links:
-	@$(PERL) $(TOP)/util/mklink.pl ../../include/openssl $(EXHEADER)
-	@$(PERL) $(TOP)/util/mklink.pl ../../test $(TEST)
-	@$(PERL) $(TOP)/util/mklink.pl ../../apps $(APPS)
-
-install:
-	@[ -n "$(INSTALLTOP)" ] # should be set by top Makefile...
-	@headerlist="$(EXHEADER)"; for i in $$headerlist ; \
-	do  \
-	(cp $$i $(INSTALL_PREFIX)$(INSTALLTOP)/include/openssl/$$i; \
-	chmod 644 $(INSTALL_PREFIX)$(INSTALLTOP)/include/openssl/$$i ); \
-	done;
-
-tags:
-	ctags $(SRC)
-
-tests:
-
-lint:
-	lint -DLINT $(INCLUDES) $(SRC)>fluff
-
-depend:
-	@[ -n "$(MAKEDEPEND)" ] # should be set by upper Makefile...
-	$(MAKEDEPEND) -- $(CFLAG) $(INCLUDES) $(DEPFLAG) -- $(PROGS) $(LIBSRC)
-
-dclean:
-	$(PERL) -pe 'if (/^# DO NOT DELETE THIS LINE/) {print; exit(0);}' $(MAKEFILE) >Makefile.new
-	mv -f Makefile.new $(MAKEFILE)
-
-clean:
-	rm -f *.o *.obj lib tags core .pure .nfs* *.old *.bak fluff
-
-# DO NOT DELETE THIS LINE -- make depend depends on it.
-
-p12_add.o: ../../e_os.h ../../include/openssl/asn1.h
-p12_add.o: ../../include/openssl/bio.h ../../include/openssl/buffer.h
-p12_add.o: ../../include/openssl/crypto.h ../../include/openssl/e_os2.h
-p12_add.o: ../../include/openssl/ec.h ../../include/openssl/ecdh.h
-p12_add.o: ../../include/openssl/ecdsa.h ../../include/openssl/err.h
-p12_add.o: ../../include/openssl/evp.h ../../include/openssl/lhash.h
-p12_add.o: ../../include/openssl/obj_mac.h ../../include/openssl/objects.h
-p12_add.o: ../../include/openssl/opensslconf.h ../../include/openssl/opensslv.h
-p12_add.o: ../../include/openssl/ossl_typ.h ../../include/openssl/pkcs12.h
-p12_add.o: ../../include/openssl/pkcs7.h ../../include/openssl/safestack.h
-p12_add.o: ../../include/openssl/sha.h ../../include/openssl/stack.h
-p12_add.o: ../../include/openssl/symhacks.h ../../include/openssl/x509.h
-p12_add.o: ../../include/openssl/x509_vfy.h ../cryptlib.h p12_add.c
-p12_asn.o: ../../e_os.h ../../include/openssl/asn1.h
-p12_asn.o: ../../include/openssl/asn1t.h ../../include/openssl/bio.h
-p12_asn.o: ../../include/openssl/buffer.h ../../include/openssl/crypto.h
-p12_asn.o: ../../include/openssl/e_os2.h ../../include/openssl/ec.h
-p12_asn.o: ../../include/openssl/ecdh.h ../../include/openssl/ecdsa.h
-p12_asn.o: ../../include/openssl/err.h ../../include/openssl/evp.h
-p12_asn.o: ../../include/openssl/lhash.h ../../include/openssl/obj_mac.h
-p12_asn.o: ../../include/openssl/objects.h ../../include/openssl/opensslconf.h
-p12_asn.o: ../../include/openssl/opensslv.h ../../include/openssl/ossl_typ.h
-p12_asn.o: ../../include/openssl/pkcs12.h ../../include/openssl/pkcs7.h
-p12_asn.o: ../../include/openssl/safestack.h ../../include/openssl/sha.h
-p12_asn.o: ../../include/openssl/stack.h ../../include/openssl/symhacks.h
-p12_asn.o: ../../include/openssl/x509.h ../../include/openssl/x509_vfy.h
-p12_asn.o: ../cryptlib.h p12_asn.c
-p12_attr.o: ../../e_os.h ../../include/openssl/asn1.h
-p12_attr.o: ../../include/openssl/bio.h ../../include/openssl/buffer.h
-p12_attr.o: ../../include/openssl/crypto.h ../../include/openssl/e_os2.h
-p12_attr.o: ../../include/openssl/ec.h ../../include/openssl/ecdh.h
-p12_attr.o: ../../include/openssl/ecdsa.h ../../include/openssl/err.h
-p12_attr.o: ../../include/openssl/evp.h ../../include/openssl/lhash.h
-p12_attr.o: ../../include/openssl/obj_mac.h ../../include/openssl/objects.h
-p12_attr.o: ../../include/openssl/opensslconf.h
-p12_attr.o: ../../include/openssl/opensslv.h ../../include/openssl/ossl_typ.h
-p12_attr.o: ../../include/openssl/pkcs12.h ../../include/openssl/pkcs7.h
-p12_attr.o: ../../include/openssl/safestack.h ../../include/openssl/sha.h
-p12_attr.o: ../../include/openssl/stack.h ../../include/openssl/symhacks.h
-p12_attr.o: ../../include/openssl/x509.h ../../include/openssl/x509_vfy.h
-p12_attr.o: ../cryptlib.h p12_attr.c
-p12_crpt.o: ../../e_os.h ../../include/openssl/asn1.h
-p12_crpt.o: ../../include/openssl/bio.h ../../include/openssl/buffer.h
-p12_crpt.o: ../../include/openssl/crypto.h ../../include/openssl/e_os2.h
-p12_crpt.o: ../../include/openssl/ec.h ../../include/openssl/ecdh.h
-p12_crpt.o: ../../include/openssl/ecdsa.h ../../include/openssl/err.h
-p12_crpt.o: ../../include/openssl/evp.h ../../include/openssl/lhash.h
-p12_crpt.o: ../../include/openssl/obj_mac.h ../../include/openssl/objects.h
-p12_crpt.o: ../../include/openssl/opensslconf.h
-p12_crpt.o: ../../include/openssl/opensslv.h ../../include/openssl/ossl_typ.h
-p12_crpt.o: ../../include/openssl/pkcs12.h ../../include/openssl/pkcs7.h
-p12_crpt.o: ../../include/openssl/safestack.h ../../include/openssl/sha.h
-p12_crpt.o: ../../include/openssl/stack.h ../../include/openssl/symhacks.h
-p12_crpt.o: ../../include/openssl/x509.h ../../include/openssl/x509_vfy.h
-p12_crpt.o: ../cryptlib.h p12_crpt.c
-p12_crt.o: ../../e_os.h ../../include/openssl/asn1.h
-p12_crt.o: ../../include/openssl/bio.h ../../include/openssl/buffer.h
-p12_crt.o: ../../include/openssl/crypto.h ../../include/openssl/e_os2.h
-p12_crt.o: ../../include/openssl/ec.h ../../include/openssl/ecdh.h
-p12_crt.o: ../../include/openssl/ecdsa.h ../../include/openssl/err.h
-p12_crt.o: ../../include/openssl/evp.h ../../include/openssl/lhash.h
-p12_crt.o: ../../include/openssl/obj_mac.h ../../include/openssl/objects.h
-p12_crt.o: ../../include/openssl/opensslconf.h ../../include/openssl/opensslv.h
-p12_crt.o: ../../include/openssl/ossl_typ.h ../../include/openssl/pkcs12.h
-p12_crt.o: ../../include/openssl/pkcs7.h ../../include/openssl/safestack.h
-p12_crt.o: ../../include/openssl/sha.h ../../include/openssl/stack.h
-p12_crt.o: ../../include/openssl/symhacks.h ../../include/openssl/x509.h
-p12_crt.o: ../../include/openssl/x509_vfy.h ../cryptlib.h p12_crt.c
-p12_decr.o: ../../e_os.h ../../include/openssl/asn1.h
-p12_decr.o: ../../include/openssl/bio.h ../../include/openssl/buffer.h
-p12_decr.o: ../../include/openssl/crypto.h ../../include/openssl/e_os2.h
-p12_decr.o: ../../include/openssl/ec.h ../../include/openssl/ecdh.h
-p12_decr.o: ../../include/openssl/ecdsa.h ../../include/openssl/err.h
-p12_decr.o: ../../include/openssl/evp.h ../../include/openssl/lhash.h
-p12_decr.o: ../../include/openssl/obj_mac.h ../../include/openssl/objects.h
-p12_decr.o: ../../include/openssl/opensslconf.h
-p12_decr.o: ../../include/openssl/opensslv.h ../../include/openssl/ossl_typ.h
-p12_decr.o: ../../include/openssl/pkcs12.h ../../include/openssl/pkcs7.h
-p12_decr.o: ../../include/openssl/safestack.h ../../include/openssl/sha.h
-p12_decr.o: ../../include/openssl/stack.h ../../include/openssl/symhacks.h
-p12_decr.o: ../../include/openssl/x509.h ../../include/openssl/x509_vfy.h
-p12_decr.o: ../cryptlib.h p12_decr.c
-p12_init.o: ../../e_os.h ../../include/openssl/asn1.h
-p12_init.o: ../../include/openssl/bio.h ../../include/openssl/buffer.h
-p12_init.o: ../../include/openssl/crypto.h ../../include/openssl/e_os2.h
-p12_init.o: ../../include/openssl/ec.h ../../include/openssl/ecdh.h
-p12_init.o: ../../include/openssl/ecdsa.h ../../include/openssl/err.h
-p12_init.o: ../../include/openssl/evp.h ../../include/openssl/lhash.h
-p12_init.o: ../../include/openssl/obj_mac.h ../../include/openssl/objects.h
-p12_init.o: ../../include/openssl/opensslconf.h
-p12_init.o: ../../include/openssl/opensslv.h ../../include/openssl/ossl_typ.h
-p12_init.o: ../../include/openssl/pkcs12.h ../../include/openssl/pkcs7.h
-p12_init.o: ../../include/openssl/safestack.h ../../include/openssl/sha.h
-p12_init.o: ../../include/openssl/stack.h ../../include/openssl/symhacks.h
-p12_init.o: ../../include/openssl/x509.h ../../include/openssl/x509_vfy.h
-p12_init.o: ../cryptlib.h p12_init.c
-p12_key.o: ../../e_os.h ../../include/openssl/asn1.h
-p12_key.o: ../../include/openssl/bio.h ../../include/openssl/bn.h
-p12_key.o: ../../include/openssl/buffer.h ../../include/openssl/crypto.h
-p12_key.o: ../../include/openssl/e_os2.h ../../include/openssl/ec.h
-p12_key.o: ../../include/openssl/ecdh.h ../../include/openssl/ecdsa.h
-p12_key.o: ../../include/openssl/err.h ../../include/openssl/evp.h
-p12_key.o: ../../include/openssl/lhash.h ../../include/openssl/obj_mac.h
-p12_key.o: ../../include/openssl/objects.h ../../include/openssl/opensslconf.h
-p12_key.o: ../../include/openssl/opensslv.h ../../include/openssl/ossl_typ.h
-p12_key.o: ../../include/openssl/pkcs12.h ../../include/openssl/pkcs7.h
-p12_key.o: ../../include/openssl/safestack.h ../../include/openssl/sha.h
-p12_key.o: ../../include/openssl/stack.h ../../include/openssl/symhacks.h
-p12_key.o: ../../include/openssl/x509.h ../../include/openssl/x509_vfy.h
-p12_key.o: ../cryptlib.h p12_key.c
-p12_kiss.o: ../../e_os.h ../../include/openssl/asn1.h
-p12_kiss.o: ../../include/openssl/bio.h ../../include/openssl/buffer.h
-p12_kiss.o: ../../include/openssl/crypto.h ../../include/openssl/e_os2.h
-p12_kiss.o: ../../include/openssl/ec.h ../../include/openssl/ecdh.h
-p12_kiss.o: ../../include/openssl/ecdsa.h ../../include/openssl/err.h
-p12_kiss.o: ../../include/openssl/evp.h ../../include/openssl/lhash.h
-p12_kiss.o: ../../include/openssl/obj_mac.h ../../include/openssl/objects.h
-p12_kiss.o: ../../include/openssl/opensslconf.h
-p12_kiss.o: ../../include/openssl/opensslv.h ../../include/openssl/ossl_typ.h
-p12_kiss.o: ../../include/openssl/pkcs12.h ../../include/openssl/pkcs7.h
-p12_kiss.o: ../../include/openssl/safestack.h ../../include/openssl/sha.h
-p12_kiss.o: ../../include/openssl/stack.h ../../include/openssl/symhacks.h
-p12_kiss.o: ../../include/openssl/x509.h ../../include/openssl/x509_vfy.h
-p12_kiss.o: ../cryptlib.h p12_kiss.c
-p12_mutl.o: ../../e_os.h ../../include/openssl/asn1.h
-p12_mutl.o: ../../include/openssl/bio.h ../../include/openssl/buffer.h
-p12_mutl.o: ../../include/openssl/crypto.h ../../include/openssl/e_os2.h
-p12_mutl.o: ../../include/openssl/ec.h ../../include/openssl/ecdh.h
-p12_mutl.o: ../../include/openssl/ecdsa.h ../../include/openssl/err.h
-p12_mutl.o: ../../include/openssl/evp.h ../../include/openssl/hmac.h
-p12_mutl.o: ../../include/openssl/lhash.h ../../include/openssl/obj_mac.h
-p12_mutl.o: ../../include/openssl/objects.h ../../include/openssl/opensslconf.h
-p12_mutl.o: ../../include/openssl/opensslv.h ../../include/openssl/ossl_typ.h
-p12_mutl.o: ../../include/openssl/pkcs12.h ../../include/openssl/pkcs7.h
-p12_mutl.o: ../../include/openssl/rand.h ../../include/openssl/safestack.h
-p12_mutl.o: ../../include/openssl/sha.h ../../include/openssl/stack.h
-p12_mutl.o: ../../include/openssl/symhacks.h ../../include/openssl/x509.h
-p12_mutl.o: ../../include/openssl/x509_vfy.h ../cryptlib.h p12_mutl.c
-p12_npas.o: ../../include/openssl/asn1.h ../../include/openssl/bio.h
-p12_npas.o: ../../include/openssl/buffer.h ../../include/openssl/crypto.h
-p12_npas.o: ../../include/openssl/e_os2.h ../../include/openssl/ec.h
-p12_npas.o: ../../include/openssl/ecdh.h ../../include/openssl/ecdsa.h
-p12_npas.o: ../../include/openssl/err.h ../../include/openssl/evp.h
-p12_npas.o: ../../include/openssl/lhash.h ../../include/openssl/obj_mac.h
-p12_npas.o: ../../include/openssl/objects.h ../../include/openssl/opensslconf.h
-p12_npas.o: ../../include/openssl/opensslv.h ../../include/openssl/ossl_typ.h
-p12_npas.o: ../../include/openssl/pem.h ../../include/openssl/pem2.h
-p12_npas.o: ../../include/openssl/pkcs12.h ../../include/openssl/pkcs7.h
-p12_npas.o: ../../include/openssl/safestack.h ../../include/openssl/sha.h
-p12_npas.o: ../../include/openssl/stack.h ../../include/openssl/symhacks.h
-p12_npas.o: ../../include/openssl/x509.h ../../include/openssl/x509_vfy.h
-p12_npas.o: p12_npas.c
-p12_p8d.o: ../../e_os.h ../../include/openssl/asn1.h
-p12_p8d.o: ../../include/openssl/bio.h ../../include/openssl/buffer.h
-p12_p8d.o: ../../include/openssl/crypto.h ../../include/openssl/e_os2.h
-p12_p8d.o: ../../include/openssl/ec.h ../../include/openssl/ecdh.h
-p12_p8d.o: ../../include/openssl/ecdsa.h ../../include/openssl/err.h
-p12_p8d.o: ../../include/openssl/evp.h ../../include/openssl/lhash.h
-p12_p8d.o: ../../include/openssl/obj_mac.h ../../include/openssl/objects.h
-p12_p8d.o: ../../include/openssl/opensslconf.h ../../include/openssl/opensslv.h
-p12_p8d.o: ../../include/openssl/ossl_typ.h ../../include/openssl/pkcs12.h
-p12_p8d.o: ../../include/openssl/pkcs7.h ../../include/openssl/safestack.h
-p12_p8d.o: ../../include/openssl/sha.h ../../include/openssl/stack.h
-p12_p8d.o: ../../include/openssl/symhacks.h ../../include/openssl/x509.h
-p12_p8d.o: ../../include/openssl/x509_vfy.h ../cryptlib.h p12_p8d.c
-p12_p8e.o: ../../e_os.h ../../include/openssl/asn1.h
-p12_p8e.o: ../../include/openssl/bio.h ../../include/openssl/buffer.h
-p12_p8e.o: ../../include/openssl/crypto.h ../../include/openssl/e_os2.h
-p12_p8e.o: ../../include/openssl/ec.h ../../include/openssl/ecdh.h
-p12_p8e.o: ../../include/openssl/ecdsa.h ../../include/openssl/err.h
-p12_p8e.o: ../../include/openssl/evp.h ../../include/openssl/lhash.h
-p12_p8e.o: ../../include/openssl/obj_mac.h ../../include/openssl/objects.h
-p12_p8e.o: ../../include/openssl/opensslconf.h ../../include/openssl/opensslv.h
-p12_p8e.o: ../../include/openssl/ossl_typ.h ../../include/openssl/pkcs12.h
-p12_p8e.o: ../../include/openssl/pkcs7.h ../../include/openssl/safestack.h
-p12_p8e.o: ../../include/openssl/sha.h ../../include/openssl/stack.h
-p12_p8e.o: ../../include/openssl/symhacks.h ../../include/openssl/x509.h
-p12_p8e.o: ../../include/openssl/x509_vfy.h ../cryptlib.h p12_p8e.c
-p12_utl.o: ../../e_os.h ../../include/openssl/asn1.h
-p12_utl.o: ../../include/openssl/bio.h ../../include/openssl/buffer.h
-p12_utl.o: ../../include/openssl/crypto.h ../../include/openssl/e_os2.h
-p12_utl.o: ../../include/openssl/ec.h ../../include/openssl/ecdh.h
-p12_utl.o: ../../include/openssl/ecdsa.h ../../include/openssl/err.h
-p12_utl.o: ../../include/openssl/evp.h ../../include/openssl/lhash.h
-p12_utl.o: ../../include/openssl/obj_mac.h ../../include/openssl/objects.h
-p12_utl.o: ../../include/openssl/opensslconf.h ../../include/openssl/opensslv.h
-p12_utl.o: ../../include/openssl/ossl_typ.h ../../include/openssl/pkcs12.h
-p12_utl.o: ../../include/openssl/pkcs7.h ../../include/openssl/safestack.h
-p12_utl.o: ../../include/openssl/sha.h ../../include/openssl/stack.h
-p12_utl.o: ../../include/openssl/symhacks.h ../../include/openssl/x509.h
-p12_utl.o: ../../include/openssl/x509_vfy.h ../cryptlib.h p12_utl.c
-pk12err.o: ../../include/openssl/asn1.h ../../include/openssl/bio.h
-pk12err.o: ../../include/openssl/buffer.h ../../include/openssl/crypto.h
-pk12err.o: ../../include/openssl/e_os2.h ../../include/openssl/ec.h
-pk12err.o: ../../include/openssl/ecdh.h ../../include/openssl/ecdsa.h
-pk12err.o: ../../include/openssl/err.h ../../include/openssl/evp.h
-pk12err.o: ../../include/openssl/lhash.h ../../include/openssl/obj_mac.h
-pk12err.o: ../../include/openssl/objects.h ../../include/openssl/opensslconf.h
-pk12err.o: ../../include/openssl/opensslv.h ../../include/openssl/ossl_typ.h
-pk12err.o: ../../include/openssl/pkcs12.h ../../include/openssl/pkcs7.h
-pk12err.o: ../../include/openssl/safestack.h ../../include/openssl/sha.h
-pk12err.o: ../../include/openssl/stack.h ../../include/openssl/symhacks.h
-pk12err.o: ../../include/openssl/x509.h ../../include/openssl/x509_vfy.h
-pk12err.o: pk12err.c
diff --git a/crypto/openssl/crypto/pkcs12/p12_add.c b/crypto/openssl/crypto/pkcs12/p12_add.c
deleted file mode 100644
index 41bdc0055104..000000000000
--- a/crypto/openssl/crypto/pkcs12/p12_add.c
+++ /dev/null
@@ -1,224 +0,0 @@
-/* p12_add.c */
-/* Written by Dr Stephen N Henson (shenson@bigfoot.com) for the OpenSSL
- * project 1999.
- */
-/* ====================================================================
- * Copyright (c) 1999 The OpenSSL Project.  All rights reserved.
- *
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions
- * are met:
- *
- * 1. Redistributions of source code must retain the above copyright
- *    notice, this list of conditions and the following disclaimer. 
- *
- * 2. Redistributions in binary form must reproduce the above copyright
- *    notice, this list of conditions and the following disclaimer in
- *    the documentation and/or other materials provided with the
- *    distribution.
- *
- * 3. All advertising materials mentioning features or use of this
- *    software must display the following acknowledgment:
- *    "This product includes software developed by the OpenSSL Project
- *    for use in the OpenSSL Toolkit. (http://www.OpenSSL.org/)"
- *
- * 4. The names "OpenSSL Toolkit" and "OpenSSL Project" must not be used to
- *    endorse or promote products derived from this software without
- *    prior written permission. For written permission, please contact
- *    licensing@OpenSSL.org.
- *
- * 5. Products derived from this software may not be called "OpenSSL"
- *    nor may "OpenSSL" appear in their names without prior written
- *    permission of the OpenSSL Project.
- *
- * 6. Redistributions of any form whatsoever must retain the following
- *    acknowledgment:
- *    "This product includes software developed by the OpenSSL Project
- *    for use in the OpenSSL Toolkit (http://www.OpenSSL.org/)"
- *
- * THIS SOFTWARE IS PROVIDED BY THE OpenSSL PROJECT ``AS IS'' AND ANY
- * EXPRESSED OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
- * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR
- * PURPOSE ARE DISCLAIMED.  IN NO EVENT SHALL THE OpenSSL PROJECT OR
- * ITS CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
- * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
- * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
- * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
- * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
- * STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
- * ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED
- * OF THE POSSIBILITY OF SUCH DAMAGE.
- * ====================================================================
- *
- * This product includes cryptographic software written by Eric Young
- * (eay@cryptsoft.com).  This product includes software written by Tim
- * Hudson (tjh@cryptsoft.com).
- *
- */
-
-#include <stdio.h>
-#include "cryptlib.h"
-#include <openssl/pkcs12.h>
-
-/* Pack an object into an OCTET STRING and turn into a safebag */
-
-PKCS12_SAFEBAG *PKCS12_item_pack_safebag(void *obj, const ASN1_ITEM *it, int nid1,
-	     int nid2)
-{
-	PKCS12_BAGS *bag;
-	PKCS12_SAFEBAG *safebag;
-	if (!(bag = PKCS12_BAGS_new())) {
-		PKCS12err(PKCS12_F_PKCS12_ITEM_PACK_SAFEBAG, ERR_R_MALLOC_FAILURE);
-		return NULL;
-	}
-	bag->type = OBJ_nid2obj(nid1);
-	if (!ASN1_item_pack(obj, it, &bag->value.octet)) {
-		PKCS12err(PKCS12_F_PKCS12_ITEM_PACK_SAFEBAG, ERR_R_MALLOC_FAILURE);
-		return NULL;
-	}
-	if (!(safebag = PKCS12_SAFEBAG_new())) {
-		PKCS12err(PKCS12_F_PKCS12_ITEM_PACK_SAFEBAG, ERR_R_MALLOC_FAILURE);
-		return NULL;
-	}
-	safebag->value.bag = bag;
-	safebag->type = OBJ_nid2obj(nid2);
-	return safebag;
-}
-
-/* Turn PKCS8 object into a keybag */
-
-PKCS12_SAFEBAG *PKCS12_MAKE_KEYBAG(PKCS8_PRIV_KEY_INFO *p8)
-{
-	PKCS12_SAFEBAG *bag;
-	if (!(bag = PKCS12_SAFEBAG_new())) {
-		PKCS12err(PKCS12_F_PKCS12_MAKE_KEYBAG,ERR_R_MALLOC_FAILURE);
-		return NULL;
-	}
-	bag->type = OBJ_nid2obj(NID_keyBag);
-	bag->value.keybag = p8;
-	return bag;
-}
-
-/* Turn PKCS8 object into a shrouded keybag */
-
-PKCS12_SAFEBAG *PKCS12_MAKE_SHKEYBAG(int pbe_nid, const char *pass,
-	     int passlen, unsigned char *salt, int saltlen, int iter,
-	     PKCS8_PRIV_KEY_INFO *p8)
-{
-	PKCS12_SAFEBAG *bag;
-
-	/* Set up the safe bag */
-	if (!(bag = PKCS12_SAFEBAG_new())) {
-		PKCS12err(PKCS12_F_PKCS12_MAKE_SHKEYBAG, ERR_R_MALLOC_FAILURE);
-		return NULL;
-	}
-
-	bag->type = OBJ_nid2obj(NID_pkcs8ShroudedKeyBag);
-	if (!(bag->value.shkeybag = 
-	  PKCS8_encrypt(pbe_nid, NULL, pass, passlen, salt, saltlen, iter,
-									 p8))) {
-		PKCS12err(PKCS12_F_PKCS12_MAKE_SHKEYBAG, ERR_R_MALLOC_FAILURE);
-		return NULL;
-	}
-
-	return bag;
-}
-
-/* Turn a stack of SAFEBAGS into a PKCS#7 data Contentinfo */
-PKCS7 *PKCS12_pack_p7data(STACK_OF(PKCS12_SAFEBAG) *sk)
-{
-	PKCS7 *p7;
-	if (!(p7 = PKCS7_new())) {
-		PKCS12err(PKCS12_F_PKCS12_PACK_P7DATA, ERR_R_MALLOC_FAILURE);
-		return NULL;
-	}
-	p7->type = OBJ_nid2obj(NID_pkcs7_data);
-	if (!(p7->d.data = M_ASN1_OCTET_STRING_new())) {
-		PKCS12err(PKCS12_F_PKCS12_PACK_P7DATA, ERR_R_MALLOC_FAILURE);
-		return NULL;
-	}
-	
-	if (!ASN1_item_pack(sk, ASN1_ITEM_rptr(PKCS12_SAFEBAGS), &p7->d.data)) {
-		PKCS12err(PKCS12_F_PKCS12_PACK_P7DATA, PKCS12_R_CANT_PACK_STRUCTURE);
-		return NULL;
-	}
-	return p7;
-}
-
-/* Unpack SAFEBAGS from PKCS#7 data ContentInfo */
-STACK_OF(PKCS12_SAFEBAG) *PKCS12_unpack_p7data(PKCS7 *p7)
-{
-	if(!PKCS7_type_is_data(p7))
-		{
-		PKCS12err(PKCS12_F_PKCS12_UNPACK_P7DATA,PKCS12_R_CONTENT_TYPE_NOT_DATA);
-		return NULL;
-		}
-	return ASN1_item_unpack(p7->d.data, ASN1_ITEM_rptr(PKCS12_SAFEBAGS));
-}
-
-/* Turn a stack of SAFEBAGS into a PKCS#7 encrypted data ContentInfo */
-
-PKCS7 *PKCS12_pack_p7encdata(int pbe_nid, const char *pass, int passlen,
-			      unsigned char *salt, int saltlen, int iter,
-			      STACK_OF(PKCS12_SAFEBAG) *bags)
-{
-	PKCS7 *p7;
-	X509_ALGOR *pbe;
-	if (!(p7 = PKCS7_new())) {
-		PKCS12err(PKCS12_F_PKCS12_PACK_P7ENCDATA, ERR_R_MALLOC_FAILURE);
-		return NULL;
-	}
-	if(!PKCS7_set_type(p7, NID_pkcs7_encrypted)) {
-		PKCS12err(PKCS12_F_PKCS12_PACK_P7ENCDATA,
-				PKCS12_R_ERROR_SETTING_ENCRYPTED_DATA_TYPE);
-		return NULL;
-	}
-	if (!(pbe = PKCS5_pbe_set(pbe_nid, iter, salt, saltlen))) {
-		PKCS12err(PKCS12_F_PKCS12_PACK_P7ENCDATA, ERR_R_MALLOC_FAILURE);
-		return NULL;
-	}
-	X509_ALGOR_free(p7->d.encrypted->enc_data->algorithm);
-	p7->d.encrypted->enc_data->algorithm = pbe;
-	M_ASN1_OCTET_STRING_free(p7->d.encrypted->enc_data->enc_data);
-	if (!(p7->d.encrypted->enc_data->enc_data =
-	PKCS12_item_i2d_encrypt(pbe, ASN1_ITEM_rptr(PKCS12_SAFEBAGS), pass, passlen,
-				 bags, 1))) {
-		PKCS12err(PKCS12_F_PKCS12_PACK_P7ENCDATA, PKCS12_R_ENCRYPT_ERROR);
-		return NULL;
-	}
-
-	return p7;
-}
-
-STACK_OF(PKCS12_SAFEBAG) *PKCS12_unpack_p7encdata(PKCS7 *p7, const char *pass, int passlen)
-{
-	if(!PKCS7_type_is_encrypted(p7)) return NULL;
-	return PKCS12_item_decrypt_d2i(p7->d.encrypted->enc_data->algorithm,
-			           ASN1_ITEM_rptr(PKCS12_SAFEBAGS),
-				   pass, passlen,
-			           p7->d.encrypted->enc_data->enc_data, 1);
-}
-
-PKCS8_PRIV_KEY_INFO *PKCS12_decrypt_skey(PKCS12_SAFEBAG *bag, const char *pass,
-								int passlen)
-{
-	return PKCS8_decrypt(bag->value.shkeybag, pass, passlen);
-}
-
-int PKCS12_pack_authsafes(PKCS12 *p12, STACK_OF(PKCS7) *safes) 
-{
-	if(ASN1_item_pack(safes, ASN1_ITEM_rptr(PKCS12_AUTHSAFES),
-		&p12->authsafes->d.data)) 
-			return 1;
-	return 0;
-}
-
-STACK_OF(PKCS7) *PKCS12_unpack_authsafes(PKCS12 *p12)
-{
-	if (!PKCS7_type_is_data(p12->authsafes))
-		{
-		PKCS12err(PKCS12_F_PKCS12_UNPACK_AUTHSAFES,PKCS12_R_CONTENT_TYPE_NOT_DATA);
-		return NULL;
-		}
-	return ASN1_item_unpack(p12->authsafes->d.data, ASN1_ITEM_rptr(PKCS12_AUTHSAFES));
-}
diff --git a/crypto/openssl/crypto/pkcs12/p12_asn.c b/crypto/openssl/crypto/pkcs12/p12_asn.c
deleted file mode 100644
index a3739fee1a6d..000000000000
--- a/crypto/openssl/crypto/pkcs12/p12_asn.c
+++ /dev/null
@@ -1,125 +0,0 @@
-/* p12_asn.c */
-/* Written by Dr Stephen N Henson (shenson@bigfoot.com) for the OpenSSL
- * project 1999.
- */
-/* ====================================================================
- * Copyright (c) 1999 The OpenSSL Project.  All rights reserved.
- *
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions
- * are met:
- *
- * 1. Redistributions of source code must retain the above copyright
- *    notice, this list of conditions and the following disclaimer. 
- *
- * 2. Redistributions in binary form must reproduce the above copyright
- *    notice, this list of conditions and the following disclaimer in
- *    the documentation and/or other materials provided with the
- *    distribution.
- *
- * 3. All advertising materials mentioning features or use of this
- *    software must display the following acknowledgment:
- *    "This product includes software developed by the OpenSSL Project
- *    for use in the OpenSSL Toolkit. (http://www.OpenSSL.org/)"
- *
- * 4. The names "OpenSSL Toolkit" and "OpenSSL Project" must not be used to
- *    endorse or promote products derived from this software without
- *    prior written permission. For written permission, please contact
- *    licensing@OpenSSL.org.
- *
- * 5. Products derived from this software may not be called "OpenSSL"
- *    nor may "OpenSSL" appear in their names without prior written
- *    permission of the OpenSSL Project.
- *
- * 6. Redistributions of any form whatsoever must retain the following
- *    acknowledgment:
- *    "This product includes software developed by the OpenSSL Project
- *    for use in the OpenSSL Toolkit (http://www.OpenSSL.org/)"
- *
- * THIS SOFTWARE IS PROVIDED BY THE OpenSSL PROJECT ``AS IS'' AND ANY
- * EXPRESSED OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
- * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR
- * PURPOSE ARE DISCLAIMED.  IN NO EVENT SHALL THE OpenSSL PROJECT OR
- * ITS CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
- * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
- * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
- * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
- * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
- * STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
- * ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED
- * OF THE POSSIBILITY OF SUCH DAMAGE.
- * ====================================================================
- *
- * This product includes cryptographic software written by Eric Young
- * (eay@cryptsoft.com).  This product includes software written by Tim
- * Hudson (tjh@cryptsoft.com).
- *
- */
-
-#include <stdio.h>
-#include "cryptlib.h"
-#include <openssl/asn1t.h>
-#include <openssl/pkcs12.h>
-
-/* PKCS#12 ASN1 module */
-
-ASN1_SEQUENCE(PKCS12) = {
-	ASN1_SIMPLE(PKCS12, version, ASN1_INTEGER),
-	ASN1_SIMPLE(PKCS12, authsafes, PKCS7),
-	ASN1_OPT(PKCS12, mac, PKCS12_MAC_DATA)
-} ASN1_SEQUENCE_END(PKCS12)
-
-IMPLEMENT_ASN1_FUNCTIONS(PKCS12)
-
-ASN1_SEQUENCE(PKCS12_MAC_DATA) = {
-	ASN1_SIMPLE(PKCS12_MAC_DATA, dinfo, X509_SIG),
-	ASN1_SIMPLE(PKCS12_MAC_DATA, salt, ASN1_OCTET_STRING),
-	ASN1_OPT(PKCS12_MAC_DATA, iter, ASN1_INTEGER)
-} ASN1_SEQUENCE_END(PKCS12_MAC_DATA)
-
-IMPLEMENT_ASN1_FUNCTIONS(PKCS12_MAC_DATA)
-
-ASN1_ADB_TEMPLATE(bag_default) = ASN1_EXP(PKCS12_BAGS, value.other, ASN1_ANY, 0);
-
-ASN1_ADB(PKCS12_BAGS) = {
-	ADB_ENTRY(NID_x509Certificate, ASN1_EXP(PKCS12_BAGS, value.x509cert, ASN1_OCTET_STRING, 0)),
-	ADB_ENTRY(NID_x509Crl, ASN1_EXP(PKCS12_BAGS, value.x509crl, ASN1_OCTET_STRING, 0)),
-	ADB_ENTRY(NID_sdsiCertificate, ASN1_EXP(PKCS12_BAGS, value.sdsicert, ASN1_IA5STRING, 0)),
-} ASN1_ADB_END(PKCS12_BAGS, 0, type, 0, &bag_default_tt, NULL);
-
-ASN1_SEQUENCE(PKCS12_BAGS) = {
-	ASN1_SIMPLE(PKCS12_BAGS, type, ASN1_OBJECT),
-	ASN1_ADB_OBJECT(PKCS12_BAGS),
-} ASN1_SEQUENCE_END(PKCS12_BAGS)
-
-IMPLEMENT_ASN1_FUNCTIONS(PKCS12_BAGS)
-
-ASN1_ADB_TEMPLATE(safebag_default) = ASN1_EXP(PKCS12_SAFEBAG, value.other, ASN1_ANY, 0);
-
-ASN1_ADB(PKCS12_SAFEBAG) = {
-	ADB_ENTRY(NID_keyBag, ASN1_EXP(PKCS12_SAFEBAG, value.keybag, PKCS8_PRIV_KEY_INFO, 0)),
-	ADB_ENTRY(NID_pkcs8ShroudedKeyBag, ASN1_EXP(PKCS12_SAFEBAG, value.shkeybag, X509_SIG, 0)),
-	ADB_ENTRY(NID_safeContentsBag, ASN1_EXP_SET_OF(PKCS12_SAFEBAG, value.safes, PKCS12_SAFEBAG, 0)),
-	ADB_ENTRY(NID_certBag, ASN1_EXP(PKCS12_SAFEBAG, value.bag, PKCS12_BAGS, 0)),
-	ADB_ENTRY(NID_crlBag, ASN1_EXP(PKCS12_SAFEBAG, value.bag, PKCS12_BAGS, 0)),
-	ADB_ENTRY(NID_secretBag, ASN1_EXP(PKCS12_SAFEBAG, value.bag, PKCS12_BAGS, 0))
-} ASN1_ADB_END(PKCS12_SAFEBAG, 0, type, 0, &safebag_default_tt, NULL);
-
-ASN1_SEQUENCE(PKCS12_SAFEBAG) = {
-	ASN1_SIMPLE(PKCS12_SAFEBAG, type, ASN1_OBJECT),
-	ASN1_ADB_OBJECT(PKCS12_SAFEBAG),
-	ASN1_SET_OF_OPT(PKCS12_SAFEBAG, attrib, X509_ATTRIBUTE)
-} ASN1_SEQUENCE_END(PKCS12_SAFEBAG)
-
-IMPLEMENT_ASN1_FUNCTIONS(PKCS12_SAFEBAG)
-
-/* SEQUENCE OF SafeBag */
-ASN1_ITEM_TEMPLATE(PKCS12_SAFEBAGS) = 
-	ASN1_EX_TEMPLATE_TYPE(ASN1_TFLG_SEQUENCE_OF, 0, PKCS12_SAFEBAGS, PKCS12_SAFEBAG)
-ASN1_ITEM_TEMPLATE_END(PKCS12_SAFEBAGS)
-
-/* Authsafes: SEQUENCE OF PKCS7 */
-ASN1_ITEM_TEMPLATE(PKCS12_AUTHSAFES) = 
-	ASN1_EX_TEMPLATE_TYPE(ASN1_TFLG_SEQUENCE_OF, 0, PKCS12_AUTHSAFES, PKCS7)
-ASN1_ITEM_TEMPLATE_END(PKCS12_AUTHSAFES)
-
diff --git a/crypto/openssl/crypto/pkcs12/p12_attr.c b/crypto/openssl/crypto/pkcs12/p12_attr.c
deleted file mode 100644
index 026cf3826a70..000000000000
--- a/crypto/openssl/crypto/pkcs12/p12_attr.c
+++ /dev/null
@@ -1,145 +0,0 @@
-/* p12_attr.c */
-/* Written by Dr Stephen N Henson (shenson@bigfoot.com) for the OpenSSL
- * project 1999.
- */
-/* ====================================================================
- * Copyright (c) 1999 The OpenSSL Project.  All rights reserved.
- *
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions
- * are met:
- *
- * 1. Redistributions of source code must retain the above copyright
- *    notice, this list of conditions and the following disclaimer. 
- *
- * 2. Redistributions in binary form must reproduce the above copyright
- *    notice, this list of conditions and the following disclaimer in
- *    the documentation and/or other materials provided with the
- *    distribution.
- *
- * 3. All advertising materials mentioning features or use of this
- *    software must display the following acknowledgment:
- *    "This product includes software developed by the OpenSSL Project
- *    for use in the OpenSSL Toolkit. (http://www.OpenSSL.org/)"
- *
- * 4. The names "OpenSSL Toolkit" and "OpenSSL Project" must not be used to
- *    endorse or promote products derived from this software without
- *    prior written permission. For written permission, please contact
- *    licensing@OpenSSL.org.
- *
- * 5. Products derived from this software may not be called "OpenSSL"
- *    nor may "OpenSSL" appear in their names without prior written
- *    permission of the OpenSSL Project.
- *
- * 6. Redistributions of any form whatsoever must retain the following
- *    acknowledgment:
- *    "This product includes software developed by the OpenSSL Project
- *    for use in the OpenSSL Toolkit (http://www.OpenSSL.org/)"
- *
- * THIS SOFTWARE IS PROVIDED BY THE OpenSSL PROJECT ``AS IS'' AND ANY
- * EXPRESSED OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
- * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR
- * PURPOSE ARE DISCLAIMED.  IN NO EVENT SHALL THE OpenSSL PROJECT OR
- * ITS CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
- * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
- * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
- * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
- * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
- * STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
- * ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED
- * OF THE POSSIBILITY OF SUCH DAMAGE.
- * ====================================================================
- *
- * This product includes cryptographic software written by Eric Young
- * (eay@cryptsoft.com).  This product includes software written by Tim
- * Hudson (tjh@cryptsoft.com).
- *
- */
-
-#include <stdio.h>
-#include "cryptlib.h"
-#include <openssl/pkcs12.h>
-
-/* Add a local keyid to a safebag */
-
-int PKCS12_add_localkeyid(PKCS12_SAFEBAG *bag, unsigned char *name,
-	     int namelen)
-{
-	if (X509at_add1_attr_by_NID(&bag->attrib, NID_localKeyID,
-				V_ASN1_OCTET_STRING, name, namelen))
-		return 1;
-	else 
-		return 0;
-}
-
-/* Add key usage to PKCS#8 structure */
-
-int PKCS8_add_keyusage(PKCS8_PRIV_KEY_INFO *p8, int usage)
-{
-	unsigned char us_val;
-	us_val = (unsigned char) usage;
-	if (X509at_add1_attr_by_NID(&p8->attributes, NID_key_usage,
-				V_ASN1_BIT_STRING, &us_val, 1))
-		return 1;
-	else
-		return 0;
-}
-
-/* Add a friendlyname to a safebag */
-
-int PKCS12_add_friendlyname_asc(PKCS12_SAFEBAG *bag, const char *name,
-				 int namelen)
-{
-	if (X509at_add1_attr_by_NID(&bag->attrib, NID_friendlyName,
-				MBSTRING_ASC, (unsigned char *)name, namelen))
-		return 1;
-	else
-		return 0;
-}
-
-
-int PKCS12_add_friendlyname_uni(PKCS12_SAFEBAG *bag,
-				 const unsigned char *name, int namelen)
-{
-	if (X509at_add1_attr_by_NID(&bag->attrib, NID_friendlyName,
-				MBSTRING_BMP, name, namelen))
-		return 1;
-	else
-		return 0;
-}
-
-int PKCS12_add_CSPName_asc(PKCS12_SAFEBAG *bag, const char *name,
-				 int namelen)
-{
-	if (X509at_add1_attr_by_NID(&bag->attrib, NID_ms_csp_name,
-				MBSTRING_ASC, (unsigned char *)name, namelen))
-		return 1;
-	else
-		return 0;
-}
-
-ASN1_TYPE *PKCS12_get_attr_gen(STACK_OF(X509_ATTRIBUTE) *attrs, int attr_nid)
-{
-	X509_ATTRIBUTE *attrib;
-	int i;
-	if (!attrs) return NULL;
-	for (i = 0; i < sk_X509_ATTRIBUTE_num (attrs); i++) {
-		attrib = sk_X509_ATTRIBUTE_value (attrs, i);
-		if (OBJ_obj2nid (attrib->object) == attr_nid) {
-			if (sk_ASN1_TYPE_num (attrib->value.set))
-			    return sk_ASN1_TYPE_value(attrib->value.set, 0);
-			else return NULL;
-		}
-	}
-	return NULL;
-}
-
-char *PKCS12_get_friendlyname(PKCS12_SAFEBAG *bag)
-{
-	ASN1_TYPE *atype;
-	if (!(atype = PKCS12_get_attr(bag, NID_friendlyName))) return NULL;
-	if (atype->type != V_ASN1_BMPSTRING) return NULL;
-	return uni2asc(atype->value.bmpstring->data,
-				 atype->value.bmpstring->length);
-}
-
diff --git a/crypto/openssl/crypto/pkcs12/p12_crpt.c b/crypto/openssl/crypto/pkcs12/p12_crpt.c
deleted file mode 100644
index 3ad33c49d82d..000000000000
--- a/crypto/openssl/crypto/pkcs12/p12_crpt.c
+++ /dev/null
@@ -1,130 +0,0 @@
-/* p12_crpt.c */
-/* Written by Dr Stephen N Henson (shenson@bigfoot.com) for the OpenSSL
- * project 1999.
- */
-/* ====================================================================
- * Copyright (c) 1999 The OpenSSL Project.  All rights reserved.
- *
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions
- * are met:
- *
- * 1. Redistributions of source code must retain the above copyright
- *    notice, this list of conditions and the following disclaimer. 
- *
- * 2. Redistributions in binary form must reproduce the above copyright
- *    notice, this list of conditions and the following disclaimer in
- *    the documentation and/or other materials provided with the
- *    distribution.
- *
- * 3. All advertising materials mentioning features or use of this
- *    software must display the following acknowledgment:
- *    "This product includes software developed by the OpenSSL Project
- *    for use in the OpenSSL Toolkit. (http://www.OpenSSL.org/)"
- *
- * 4. The names "OpenSSL Toolkit" and "OpenSSL Project" must not be used to
- *    endorse or promote products derived from this software without
- *    prior written permission. For written permission, please contact
- *    licensing@OpenSSL.org.
- *
- * 5. Products derived from this software may not be called "OpenSSL"
- *    nor may "OpenSSL" appear in their names without prior written
- *    permission of the OpenSSL Project.
- *
- * 6. Redistributions of any form whatsoever must retain the following
- *    acknowledgment:
- *    "This product includes software developed by the OpenSSL Project
- *    for use in the OpenSSL Toolkit (http://www.OpenSSL.org/)"
- *
- * THIS SOFTWARE IS PROVIDED BY THE OpenSSL PROJECT ``AS IS'' AND ANY
- * EXPRESSED OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
- * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR
- * PURPOSE ARE DISCLAIMED.  IN NO EVENT SHALL THE OpenSSL PROJECT OR
- * ITS CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
- * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
- * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
- * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
- * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
- * STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
- * ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED
- * OF THE POSSIBILITY OF SUCH DAMAGE.
- * ====================================================================
- *
- * This product includes cryptographic software written by Eric Young
- * (eay@cryptsoft.com).  This product includes software written by Tim
- * Hudson (tjh@cryptsoft.com).
- *
- */
-
-#include <stdio.h>
-#include "cryptlib.h"
-#include <openssl/pkcs12.h>
-
-/* PKCS#12 specific PBE functions */
-
-void PKCS12_PBE_add(void)
-{
-#ifndef OPENSSL_NO_RC4
-EVP_PBE_alg_add(NID_pbe_WithSHA1And128BitRC4, EVP_rc4(), EVP_sha1(),
-							 PKCS12_PBE_keyivgen);
-EVP_PBE_alg_add(NID_pbe_WithSHA1And40BitRC4, EVP_rc4_40(), EVP_sha1(),
-							 PKCS12_PBE_keyivgen);
-#endif
-#ifndef OPENSSL_NO_DES
-EVP_PBE_alg_add(NID_pbe_WithSHA1And3_Key_TripleDES_CBC,
-		 	EVP_des_ede3_cbc(), EVP_sha1(), PKCS12_PBE_keyivgen);
-EVP_PBE_alg_add(NID_pbe_WithSHA1And2_Key_TripleDES_CBC, 
-			EVP_des_ede_cbc(), EVP_sha1(), PKCS12_PBE_keyivgen);
-#endif
-#ifndef OPENSSL_NO_RC2
-EVP_PBE_alg_add(NID_pbe_WithSHA1And128BitRC2_CBC, EVP_rc2_cbc(),
-					EVP_sha1(), PKCS12_PBE_keyivgen);
-EVP_PBE_alg_add(NID_pbe_WithSHA1And40BitRC2_CBC, EVP_rc2_40_cbc(),
-					EVP_sha1(), PKCS12_PBE_keyivgen);
-#endif
-}
-
-int PKCS12_PBE_keyivgen(EVP_CIPHER_CTX *ctx, const char *pass, int passlen,
-		ASN1_TYPE *param, const EVP_CIPHER *cipher, const EVP_MD *md, int en_de)
-{
-	PBEPARAM *pbe;
-	int saltlen, iter, ret;
-	unsigned char *salt;
-	const unsigned char *pbuf;
-	unsigned char key[EVP_MAX_KEY_LENGTH], iv[EVP_MAX_IV_LENGTH];
-
-	/* Extract useful info from parameter */
-	if (param == NULL || param->type != V_ASN1_SEQUENCE ||
-	    param->value.sequence == NULL) {
-		PKCS12err(PKCS12_F_PKCS12_PBE_KEYIVGEN,PKCS12_R_DECODE_ERROR);
-		return 0;
-	}
-
-	pbuf = param->value.sequence->data;
-	if (!(pbe = d2i_PBEPARAM(NULL, &pbuf, param->value.sequence->length))) {
-		PKCS12err(PKCS12_F_PKCS12_PBE_KEYIVGEN,PKCS12_R_DECODE_ERROR);
-		return 0;
-	}
-
-	if (!pbe->iter) iter = 1;
-	else iter = ASN1_INTEGER_get (pbe->iter);
-	salt = pbe->salt->data;
-	saltlen = pbe->salt->length;
-	if (!PKCS12_key_gen (pass, passlen, salt, saltlen, PKCS12_KEY_ID,
-			     iter, EVP_CIPHER_key_length(cipher), key, md)) {
-		PKCS12err(PKCS12_F_PKCS12_PBE_KEYIVGEN,PKCS12_R_KEY_GEN_ERROR);
-		PBEPARAM_free(pbe);
-		return 0;
-	}
-	if (!PKCS12_key_gen (pass, passlen, salt, saltlen, PKCS12_IV_ID,
-				iter, EVP_CIPHER_iv_length(cipher), iv, md)) {
-		PKCS12err(PKCS12_F_PKCS12_PBE_KEYIVGEN,PKCS12_R_IV_GEN_ERROR);
-		PBEPARAM_free(pbe);
-		return 0;
-	}
-	PBEPARAM_free(pbe);
-	ret = EVP_CipherInit_ex(ctx, cipher, NULL, key, iv, en_de);
-	OPENSSL_cleanse(key, EVP_MAX_KEY_LENGTH);
-	OPENSSL_cleanse(iv, EVP_MAX_IV_LENGTH);
-	return ret;
-}
diff --git a/crypto/openssl/crypto/pkcs12/p12_crt.c b/crypto/openssl/crypto/pkcs12/p12_crt.c
deleted file mode 100644
index dbafda17b681..000000000000
--- a/crypto/openssl/crypto/pkcs12/p12_crt.c
+++ /dev/null
@@ -1,348 +0,0 @@
-/* p12_crt.c */
-/* Written by Dr Stephen N Henson (shenson@bigfoot.com) for the OpenSSL
- * project.
- */
-/* ====================================================================
- * Copyright (c) 1999-2002 The OpenSSL Project.  All rights reserved.
- *
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions
- * are met:
- *
- * 1. Redistributions of source code must retain the above copyright
- *    notice, this list of conditions and the following disclaimer. 
- *
- * 2. Redistributions in binary form must reproduce the above copyright
- *    notice, this list of conditions and the following disclaimer in
- *    the documentation and/or other materials provided with the
- *    distribution.
- *
- * 3. All advertising materials mentioning features or use of this
- *    software must display the following acknowledgment:
- *    "This product includes software developed by the OpenSSL Project
- *    for use in the OpenSSL Toolkit. (http://www.OpenSSL.org/)"
- *
- * 4. The names "OpenSSL Toolkit" and "OpenSSL Project" must not be used to
- *    endorse or promote products derived from this software without
- *    prior written permission. For written permission, please contact
- *    licensing@OpenSSL.org.
- *
- * 5. Products derived from this software may not be called "OpenSSL"
- *    nor may "OpenSSL" appear in their names without prior written
- *    permission of the OpenSSL Project.
- *
- * 6. Redistributions of any form whatsoever must retain the following
- *    acknowledgment:
- *    "This product includes software developed by the OpenSSL Project
- *    for use in the OpenSSL Toolkit (http://www.OpenSSL.org/)"
- *
- * THIS SOFTWARE IS PROVIDED BY THE OpenSSL PROJECT ``AS IS'' AND ANY
- * EXPRESSED OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
- * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR
- * PURPOSE ARE DISCLAIMED.  IN NO EVENT SHALL THE OpenSSL PROJECT OR
- * ITS CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
- * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
- * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
- * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
- * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
- * STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
- * ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED
- * OF THE POSSIBILITY OF SUCH DAMAGE.
- * ====================================================================
- *
- * This product includes cryptographic software written by Eric Young
- * (eay@cryptsoft.com).  This product includes software written by Tim
- * Hudson (tjh@cryptsoft.com).
- *
- */
-
-#include <stdio.h>
-#include "cryptlib.h"
-#include <openssl/pkcs12.h>
-
-
-static int pkcs12_add_bag(STACK_OF(PKCS12_SAFEBAG) **pbags, PKCS12_SAFEBAG *bag);
-
-PKCS12 *PKCS12_create(char *pass, char *name, EVP_PKEY *pkey, X509 *cert,
-	     STACK_OF(X509) *ca, int nid_key, int nid_cert, int iter, int mac_iter,
-	     int keytype)
-{
-	PKCS12 *p12 = NULL;
-	STACK_OF(PKCS7) *safes = NULL;
-	STACK_OF(PKCS12_SAFEBAG) *bags = NULL;
-	PKCS12_SAFEBAG *bag = NULL;
-	int i;
-	unsigned char keyid[EVP_MAX_MD_SIZE];
-	unsigned int keyidlen = 0;
-
-	/* Set defaults */
-	if (!nid_cert)
-		nid_cert = NID_pbe_WithSHA1And40BitRC2_CBC;
-	if (!nid_key)
-		nid_key = NID_pbe_WithSHA1And3_Key_TripleDES_CBC;
-	if (!iter)
-		iter = PKCS12_DEFAULT_ITER;
-	if (!mac_iter)
-		mac_iter = 1;
-
-	if(!pkey && !cert && !ca)
-		{
-		PKCS12err(PKCS12_F_PKCS12_CREATE,PKCS12_R_INVALID_NULL_ARGUMENT);
-		return NULL;
-		}
-
-	if (pkey && cert)
-		{
-		if(!X509_check_private_key(cert, pkey))
-			return NULL;
-		X509_digest(cert, EVP_sha1(), keyid, &keyidlen);
-		}
-
-	if (cert)
-		{
-		bag = PKCS12_add_cert(&bags, cert);
-		if(name && !PKCS12_add_friendlyname(bag, name, -1))
-			goto err;
-		if(keyidlen && !PKCS12_add_localkeyid(bag, keyid, keyidlen))
-			goto err;
-		}
-
-	/* Add all other certificates */
-	for(i = 0; i < sk_X509_num(ca); i++)
-		{
-		if (!PKCS12_add_cert(&bags, sk_X509_value(ca, i)))
-			goto err;
-		}
-
-	if (bags && !PKCS12_add_safe(&safes, bags, nid_cert, iter, pass))
-			goto err;
-
-	sk_PKCS12_SAFEBAG_pop_free(bags, PKCS12_SAFEBAG_free);
-	bags = NULL;
-
-	if (pkey)
-		{
-		int cspidx;
-		bag = PKCS12_add_key(&bags, pkey, keytype, iter, nid_key, pass);
-
-		if (!bag)
-			goto err;
-
-		cspidx = EVP_PKEY_get_attr_by_NID(pkey, NID_ms_csp_name, -1);
-		if (cspidx >= 0)
-			{
-			X509_ATTRIBUTE *cspattr;
-			cspattr = EVP_PKEY_get_attr(pkey, cspidx);
-			if (!X509at_add1_attr(&bag->attrib, cspattr))
-				goto err;
-			}
-
-		if(name && !PKCS12_add_friendlyname(bag, name, -1))
-			goto err;
-		if(keyidlen && !PKCS12_add_localkeyid(bag, keyid, keyidlen))
-			goto err;
-		}
-
-	if (bags && !PKCS12_add_safe(&safes, bags, -1, 0, NULL))
-			goto err;
-
-	sk_PKCS12_SAFEBAG_pop_free(bags, PKCS12_SAFEBAG_free);
-	bags = NULL;
-
-	p12 = PKCS12_add_safes(safes, 0);
-
-	sk_PKCS7_pop_free(safes, PKCS7_free);
-
-	safes = NULL;
-
-	if ((mac_iter != -1) &&
-		!PKCS12_set_mac(p12, pass, -1, NULL, 0, mac_iter, NULL))
-	    goto err;
-
-	return p12;
-
-	err:
-
-	if (p12)
-		PKCS12_free(p12);
-	if (safes)
-		sk_PKCS7_pop_free(safes, PKCS7_free);
-	if (bags)
-		sk_PKCS12_SAFEBAG_pop_free(bags, PKCS12_SAFEBAG_free);
-	return NULL;
-
-}
-
-PKCS12_SAFEBAG *PKCS12_add_cert(STACK_OF(PKCS12_SAFEBAG) **pbags, X509 *cert)
-	{
-	PKCS12_SAFEBAG *bag = NULL;
-	char *name;
-	int namelen = -1;
-	unsigned char *keyid;
-	int keyidlen = -1;
-
-	/* Add user certificate */
-	if(!(bag = PKCS12_x5092certbag(cert)))
-		goto err;
-
-	/* Use friendlyName and localKeyID in certificate.
-	 * (if present)
-	 */
-
-	name = (char *)X509_alias_get0(cert, &namelen);
-
-	if(name && !PKCS12_add_friendlyname(bag, name, namelen))
-		goto err;
-
-	keyid = X509_keyid_get0(cert, &keyidlen);
-
-	if(keyid && !PKCS12_add_localkeyid(bag, keyid, keyidlen))
-		goto err;
-
-	if (!pkcs12_add_bag(pbags, bag))
-		goto err;
-
-	return bag;
-
-	err:
-
-	if (bag)
-		PKCS12_SAFEBAG_free(bag);
-
-	return NULL;
-
-	}
-
-PKCS12_SAFEBAG *PKCS12_add_key(STACK_OF(PKCS12_SAFEBAG) **pbags, EVP_PKEY *key,
-						int key_usage, int iter,
-						int nid_key, char *pass)
-	{
-
-	PKCS12_SAFEBAG *bag = NULL;
-	PKCS8_PRIV_KEY_INFO *p8 = NULL;
-
-	/* Make a PKCS#8 structure */
-	if(!(p8 = EVP_PKEY2PKCS8(key)))
-		goto err;
-	if(key_usage && !PKCS8_add_keyusage(p8, key_usage))
-		goto err;
-	if (nid_key != -1)
-		{
-		bag = PKCS12_MAKE_SHKEYBAG(nid_key, pass, -1, NULL, 0, iter, p8);
-		PKCS8_PRIV_KEY_INFO_free(p8);
-		}
-	else
-		bag = PKCS12_MAKE_KEYBAG(p8);
-
-	if(!bag)
-		goto err;
-
-	if (!pkcs12_add_bag(pbags, bag))
-		goto err;
-
-	return bag;
-
-	err:
-
-	if (bag)
-		PKCS12_SAFEBAG_free(bag);
-
-	return NULL;
-
-	}
-
-int PKCS12_add_safe(STACK_OF(PKCS7) **psafes, STACK_OF(PKCS12_SAFEBAG) *bags,
-						int nid_safe, int iter, char *pass)
-	{
-	PKCS7 *p7 = NULL;
-	int free_safes = 0;
-
-	if (!*psafes)
-		{
-		*psafes = sk_PKCS7_new_null();
-		if (!*psafes)
-			return 0;
-		free_safes = 1;
-		}
-	else
-		free_safes = 0;
-
-	if (nid_safe == 0)
-		nid_safe = NID_pbe_WithSHA1And40BitRC2_CBC;
-
-	if (nid_safe == -1)
-		p7 = PKCS12_pack_p7data(bags);
-	else
-		p7 = PKCS12_pack_p7encdata(nid_safe, pass, -1, NULL, 0,
-					  iter, bags);
-	if (!p7)
-		goto err;
-
-	if (!sk_PKCS7_push(*psafes, p7))
-		goto err;
-
-	return 1;
-
-	err:
-	if (free_safes)
-		{
-		sk_PKCS7_free(*psafes);
-		*psafes = NULL;
-		}
-
-	if (p7)
-		PKCS7_free(p7);
-
-	return 0;
-
-	}
-
-static int pkcs12_add_bag(STACK_OF(PKCS12_SAFEBAG) **pbags, PKCS12_SAFEBAG *bag)
-	{
-	int free_bags;
-	if (!pbags)
-		return 1;
-	if (!*pbags)
-		{
-		*pbags = sk_PKCS12_SAFEBAG_new_null();
-		if (!*pbags)
-			return 0;
-		free_bags = 1;
-		}
-	else 
-		free_bags = 0;
-
-	if (!sk_PKCS12_SAFEBAG_push(*pbags, bag))
-		{
-		if (free_bags)
-			{
-			sk_PKCS12_SAFEBAG_free(*pbags);
-			*pbags = NULL;
-			}
-		return 0;
-		}
-
-	return 1;
-
-	}
-		
-
-PKCS12 *PKCS12_add_safes(STACK_OF(PKCS7) *safes, int nid_p7)
-	{
-	PKCS12 *p12;
-	if (nid_p7 <= 0)
-		nid_p7 = NID_pkcs7_data;
-	p12 = PKCS12_init(nid_p7);
-
-	if (!p12)
-		return NULL;
-
-	if(!PKCS12_pack_authsafes(p12, safes))
-		{
-		PKCS12_free(p12);
-		return NULL;
-		}
-
-	return p12;
-
-	}
diff --git a/crypto/openssl/crypto/pkcs12/p12_decr.c b/crypto/openssl/crypto/pkcs12/p12_decr.c
deleted file mode 100644
index 74c961a92b89..000000000000
--- a/crypto/openssl/crypto/pkcs12/p12_decr.c
+++ /dev/null
@@ -1,177 +0,0 @@
-/* p12_decr.c */
-/* Written by Dr Stephen N Henson (shenson@bigfoot.com) for the OpenSSL
- * project 1999.
- */
-/* ====================================================================
- * Copyright (c) 1999 The OpenSSL Project.  All rights reserved.
- *
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions
- * are met:
- *
- * 1. Redistributions of source code must retain the above copyright
- *    notice, this list of conditions and the following disclaimer. 
- *
- * 2. Redistributions in binary form must reproduce the above copyright
- *    notice, this list of conditions and the following disclaimer in
- *    the documentation and/or other materials provided with the
- *    distribution.
- *
- * 3. All advertising materials mentioning features or use of this
- *    software must display the following acknowledgment:
- *    "This product includes software developed by the OpenSSL Project
- *    for use in the OpenSSL Toolkit. (http://www.OpenSSL.org/)"
- *
- * 4. The names "OpenSSL Toolkit" and "OpenSSL Project" must not be used to
- *    endorse or promote products derived from this software without
- *    prior written permission. For written permission, please contact
- *    licensing@OpenSSL.org.
- *
- * 5. Products derived from this software may not be called "OpenSSL"
- *    nor may "OpenSSL" appear in their names without prior written
- *    permission of the OpenSSL Project.
- *
- * 6. Redistributions of any form whatsoever must retain the following
- *    acknowledgment:
- *    "This product includes software developed by the OpenSSL Project
- *    for use in the OpenSSL Toolkit (http://www.OpenSSL.org/)"
- *
- * THIS SOFTWARE IS PROVIDED BY THE OpenSSL PROJECT ``AS IS'' AND ANY
- * EXPRESSED OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
- * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR
- * PURPOSE ARE DISCLAIMED.  IN NO EVENT SHALL THE OpenSSL PROJECT OR
- * ITS CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
- * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
- * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
- * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
- * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
- * STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
- * ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED
- * OF THE POSSIBILITY OF SUCH DAMAGE.
- * ====================================================================
- *
- * This product includes cryptographic software written by Eric Young
- * (eay@cryptsoft.com).  This product includes software written by Tim
- * Hudson (tjh@cryptsoft.com).
- *
- */
-
-#include <stdio.h>
-#include "cryptlib.h"
-#include <openssl/pkcs12.h>
-
-/* Define this to dump decrypted output to files called DERnnn */
-/*#define DEBUG_DECRYPT*/
-
-
-/* Encrypt/Decrypt a buffer based on password and algor, result in a
- * OPENSSL_malloc'ed buffer
- */
-
-unsigned char * PKCS12_pbe_crypt(X509_ALGOR *algor, const char *pass,
-	     int passlen, unsigned char *in, int inlen, unsigned char **data,
-	     int *datalen, int en_de)
-{
-	unsigned char *out;
-	int outlen, i;
-	EVP_CIPHER_CTX ctx;
-
-	EVP_CIPHER_CTX_init(&ctx);
-	/* Decrypt data */
-        if (!EVP_PBE_CipherInit(algor->algorithm, pass, passlen,
-					 algor->parameter, &ctx, en_de)) {
-		PKCS12err(PKCS12_F_PKCS12_PBE_CRYPT,PKCS12_R_PKCS12_ALGOR_CIPHERINIT_ERROR);
-		return NULL;
-	}
-
-	if(!(out = OPENSSL_malloc(inlen + EVP_CIPHER_CTX_block_size(&ctx)))) {
-		PKCS12err(PKCS12_F_PKCS12_PBE_CRYPT,ERR_R_MALLOC_FAILURE);
-		goto err;
-	}
-
-	EVP_CipherUpdate(&ctx, out, &i, in, inlen);
-	outlen = i;
-	if(!EVP_CipherFinal_ex(&ctx, out + i, &i)) {
-		OPENSSL_free(out);
-		out = NULL;
-		PKCS12err(PKCS12_F_PKCS12_PBE_CRYPT,PKCS12_R_PKCS12_CIPHERFINAL_ERROR);
-		goto err;
-	}
-	outlen += i;
-	if (datalen) *datalen = outlen;
-	if (data) *data = out;
-	err:
-	EVP_CIPHER_CTX_cleanup(&ctx);
-	return out;
-
-}
-
-/* Decrypt an OCTET STRING and decode ASN1 structure 
- * if zbuf set zero buffer after use.
- */
-
-void * PKCS12_item_decrypt_d2i(X509_ALGOR *algor, const ASN1_ITEM *it,
-	     const char *pass, int passlen, ASN1_OCTET_STRING *oct, int zbuf)
-{
-	unsigned char *out;
-	const unsigned char *p;
-	void *ret;
-	int outlen;
-
-	if (!PKCS12_pbe_crypt(algor, pass, passlen, oct->data, oct->length,
-			       &out, &outlen, 0)) {
-		PKCS12err(PKCS12_F_PKCS12_ITEM_DECRYPT_D2I,PKCS12_R_PKCS12_PBE_CRYPT_ERROR);
-		return NULL;
-	}
-	p = out;
-#ifdef DEBUG_DECRYPT
-	{
-		FILE *op;
-
-		char fname[30];
-		static int fnm = 1;
-		sprintf(fname, "DER%d", fnm++);
-		op = fopen(fname, "wb");
-		fwrite (p, 1, outlen, op);
-		fclose(op);
-	}
-#endif
-	ret = ASN1_item_d2i(NULL, &p, outlen, it);
-	if (zbuf) OPENSSL_cleanse(out, outlen);
-	if(!ret) PKCS12err(PKCS12_F_PKCS12_ITEM_DECRYPT_D2I,PKCS12_R_DECODE_ERROR);
-	OPENSSL_free(out);
-	return ret;
-}
-
-/* Encode ASN1 structure and encrypt, return OCTET STRING 
- * if zbuf set zero encoding.
- */
-
-ASN1_OCTET_STRING *PKCS12_item_i2d_encrypt(X509_ALGOR *algor, const ASN1_ITEM *it,
-				       const char *pass, int passlen,
-				       void *obj, int zbuf)
-{
-	ASN1_OCTET_STRING *oct;
-	unsigned char *in = NULL;
-	int inlen;
-	if (!(oct = M_ASN1_OCTET_STRING_new ())) {
-		PKCS12err(PKCS12_F_PKCS12_ITEM_I2D_ENCRYPT,ERR_R_MALLOC_FAILURE);
-		return NULL;
-	}
-	inlen = ASN1_item_i2d(obj, &in, it);
-	if (!in) {
-		PKCS12err(PKCS12_F_PKCS12_ITEM_I2D_ENCRYPT,PKCS12_R_ENCODE_ERROR);
-		return NULL;
-	}
-	if (!PKCS12_pbe_crypt(algor, pass, passlen, in, inlen, &oct->data,
-				 &oct->length, 1)) {
-		PKCS12err(PKCS12_F_PKCS12_ITEM_I2D_ENCRYPT,PKCS12_R_ENCRYPT_ERROR);
-		OPENSSL_free(in);
-		return NULL;
-	}
-	if (zbuf) OPENSSL_cleanse(in, inlen);
-	OPENSSL_free(in);
-	return oct;
-}
-
-IMPLEMENT_PKCS12_STACK_OF(PKCS7)
diff --git a/crypto/openssl/crypto/pkcs12/p12_init.c b/crypto/openssl/crypto/pkcs12/p12_init.c
deleted file mode 100644
index 6bdc1326317c..000000000000
--- a/crypto/openssl/crypto/pkcs12/p12_init.c
+++ /dev/null
@@ -1,92 +0,0 @@
-/* p12_init.c */
-/* Written by Dr Stephen N Henson (shenson@bigfoot.com) for the OpenSSL
- * project 1999.
- */
-/* ====================================================================
- * Copyright (c) 1999 The OpenSSL Project.  All rights reserved.
- *
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions
- * are met:
- *
- * 1. Redistributions of source code must retain the above copyright
- *    notice, this list of conditions and the following disclaimer. 
- *
- * 2. Redistributions in binary form must reproduce the above copyright
- *    notice, this list of conditions and the following disclaimer in
- *    the documentation and/or other materials provided with the
- *    distribution.
- *
- * 3. All advertising materials mentioning features or use of this
- *    software must display the following acknowledgment:
- *    "This product includes software developed by the OpenSSL Project
- *    for use in the OpenSSL Toolkit. (http://www.OpenSSL.org/)"
- *
- * 4. The names "OpenSSL Toolkit" and "OpenSSL Project" must not be used to
- *    endorse or promote products derived from this software without
- *    prior written permission. For written permission, please contact
- *    licensing@OpenSSL.org.
- *
- * 5. Products derived from this software may not be called "OpenSSL"
- *    nor may "OpenSSL" appear in their names without prior written
- *    permission of the OpenSSL Project.
- *
- * 6. Redistributions of any form whatsoever must retain the following
- *    acknowledgment:
- *    "This product includes software developed by the OpenSSL Project
- *    for use in the OpenSSL Toolkit (http://www.OpenSSL.org/)"
- *
- * THIS SOFTWARE IS PROVIDED BY THE OpenSSL PROJECT ``AS IS'' AND ANY
- * EXPRESSED OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
- * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR
- * PURPOSE ARE DISCLAIMED.  IN NO EVENT SHALL THE OpenSSL PROJECT OR
- * ITS CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
- * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
- * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
- * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
- * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
- * STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
- * ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED
- * OF THE POSSIBILITY OF SUCH DAMAGE.
- * ====================================================================
- *
- * This product includes cryptographic software written by Eric Young
- * (eay@cryptsoft.com).  This product includes software written by Tim
- * Hudson (tjh@cryptsoft.com).
- *
- */
-
-#include <stdio.h>
-#include "cryptlib.h"
-#include <openssl/pkcs12.h>
-
-/* Initialise a PKCS12 structure to take data */
-
-PKCS12 *PKCS12_init(int mode)
-{
-	PKCS12 *pkcs12;
-	if (!(pkcs12 = PKCS12_new())) {
-		PKCS12err(PKCS12_F_PKCS12_INIT,ERR_R_MALLOC_FAILURE);
-		return NULL;
-	}
-	ASN1_INTEGER_set(pkcs12->version, 3);
-	pkcs12->authsafes->type = OBJ_nid2obj(mode);
-	switch (mode) {
-		case NID_pkcs7_data:
-			if (!(pkcs12->authsafes->d.data =
-				 M_ASN1_OCTET_STRING_new())) {
-			PKCS12err(PKCS12_F_PKCS12_INIT,ERR_R_MALLOC_FAILURE);
-			goto err;
-		}
-		break;
-		default:
-			PKCS12err(PKCS12_F_PKCS12_INIT,
-				PKCS12_R_UNSUPPORTED_PKCS12_MODE);
-			goto err;
-	}
-		
-	return pkcs12;
-err:
-	if (pkcs12 != NULL) PKCS12_free(pkcs12);
-	return NULL;
-}
diff --git a/crypto/openssl/crypto/pkcs12/p12_key.c b/crypto/openssl/crypto/pkcs12/p12_key.c
deleted file mode 100644
index 18e72d0a1b81..000000000000
--- a/crypto/openssl/crypto/pkcs12/p12_key.c
+++ /dev/null
@@ -1,206 +0,0 @@
-/* p12_key.c */
-/* Written by Dr Stephen N Henson (shenson@bigfoot.com) for the OpenSSL
- * project 1999.
- */
-/* ====================================================================
- * Copyright (c) 1999 The OpenSSL Project.  All rights reserved.
- *
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions
- * are met:
- *
- * 1. Redistributions of source code must retain the above copyright
- *    notice, this list of conditions and the following disclaimer. 
- *
- * 2. Redistributions in binary form must reproduce the above copyright
- *    notice, this list of conditions and the following disclaimer in
- *    the documentation and/or other materials provided with the
- *    distribution.
- *
- * 3. All advertising materials mentioning features or use of this
- *    software must display the following acknowledgment:
- *    "This product includes software developed by the OpenSSL Project
- *    for use in the OpenSSL Toolkit. (http://www.OpenSSL.org/)"
- *
- * 4. The names "OpenSSL Toolkit" and "OpenSSL Project" must not be used to
- *    endorse or promote products derived from this software without
- *    prior written permission. For written permission, please contact
- *    licensing@OpenSSL.org.
- *
- * 5. Products derived from this software may not be called "OpenSSL"
- *    nor may "OpenSSL" appear in their names without prior written
- *    permission of the OpenSSL Project.
- *
- * 6. Redistributions of any form whatsoever must retain the following
- *    acknowledgment:
- *    "This product includes software developed by the OpenSSL Project
- *    for use in the OpenSSL Toolkit (http://www.OpenSSL.org/)"
- *
- * THIS SOFTWARE IS PROVIDED BY THE OpenSSL PROJECT ``AS IS'' AND ANY
- * EXPRESSED OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
- * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR
- * PURPOSE ARE DISCLAIMED.  IN NO EVENT SHALL THE OpenSSL PROJECT OR
- * ITS CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
- * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
- * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
- * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
- * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
- * STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
- * ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED
- * OF THE POSSIBILITY OF SUCH DAMAGE.
- * ====================================================================
- *
- * This product includes cryptographic software written by Eric Young
- * (eay@cryptsoft.com).  This product includes software written by Tim
- * Hudson (tjh@cryptsoft.com).
- *
- */
-
-#include <stdio.h>
-#include "cryptlib.h"
-#include <openssl/pkcs12.h>
-#include <openssl/bn.h>
-
-/* Uncomment out this line to get debugging info about key generation */
-/*#define DEBUG_KEYGEN*/
-#ifdef DEBUG_KEYGEN
-#include <openssl/bio.h>
-extern BIO *bio_err;
-void h__dump (unsigned char *p, int len);
-#endif
-
-/* PKCS12 compatible key/IV generation */
-#ifndef min
-#define min(a,b) ((a) < (b) ? (a) : (b))
-#endif
-
-int PKCS12_key_gen_asc(const char *pass, int passlen, unsigned char *salt,
-	     int saltlen, int id, int iter, int n, unsigned char *out,
-	     const EVP_MD *md_type)
-{
-	int ret;
-	unsigned char *unipass;
-	int uniplen;
-	if(!pass) {
-		unipass = NULL;
-		uniplen = 0;
-	} else if (!asc2uni(pass, passlen, &unipass, &uniplen)) {
-		PKCS12err(PKCS12_F_PKCS12_KEY_GEN_ASC,ERR_R_MALLOC_FAILURE);
-		return 0;
-	}
-	ret = PKCS12_key_gen_uni(unipass, uniplen, salt, saltlen,
-						 id, iter, n, out, md_type);
-	if(unipass) {
-		OPENSSL_cleanse(unipass, uniplen);	/* Clear password from memory */
-		OPENSSL_free(unipass);
-	}
-	return ret;
-}
-
-int PKCS12_key_gen_uni(unsigned char *pass, int passlen, unsigned char *salt,
-	     int saltlen, int id, int iter, int n, unsigned char *out,
-	     const EVP_MD *md_type)
-{
-	unsigned char *B, *D, *I, *p, *Ai;
-	int Slen, Plen, Ilen, Ijlen;
-	int i, j, u, v;
-	BIGNUM *Ij, *Bpl1;	/* These hold Ij and B + 1 */
-	EVP_MD_CTX ctx;
-#ifdef  DEBUG_KEYGEN
-	unsigned char *tmpout = out;
-	int tmpn = n;
-#endif
-
-#if 0
-	if (!pass) {
-		PKCS12err(PKCS12_F_PKCS12_KEY_GEN_UNI,ERR_R_PASSED_NULL_PARAMETER);
-		return 0;
-	}
-#endif
-
-	EVP_MD_CTX_init(&ctx);
-#ifdef  DEBUG_KEYGEN
-	fprintf(stderr, "KEYGEN DEBUG\n");
-	fprintf(stderr, "ID %d, ITER %d\n", id, iter);
-	fprintf(stderr, "Password (length %d):\n", passlen);
-	h__dump(pass, passlen);
-	fprintf(stderr, "Salt (length %d):\n", saltlen);
-	h__dump(salt, saltlen);
-#endif
-	v = EVP_MD_block_size (md_type);
-	u = EVP_MD_size (md_type);
-	D = OPENSSL_malloc (v);
-	Ai = OPENSSL_malloc (u);
-	B = OPENSSL_malloc (v + 1);
-	Slen = v * ((saltlen+v-1)/v);
-	if(passlen) Plen = v * ((passlen+v-1)/v);
-	else Plen = 0;
-	Ilen = Slen + Plen;
-	I = OPENSSL_malloc (Ilen);
-	Ij = BN_new();
-	Bpl1 = BN_new();
-	if (!D || !Ai || !B || !I || !Ij || !Bpl1) {
-		PKCS12err(PKCS12_F_PKCS12_KEY_GEN_UNI,ERR_R_MALLOC_FAILURE);
-		return 0;
-	}
-	for (i = 0; i < v; i++) D[i] = id;
-	p = I;
-	for (i = 0; i < Slen; i++) *p++ = salt[i % saltlen];
-	for (i = 0; i < Plen; i++) *p++ = pass[i % passlen];
-	for (;;) {
-		EVP_DigestInit_ex(&ctx, md_type, NULL);
-		EVP_DigestUpdate(&ctx, D, v);
-		EVP_DigestUpdate(&ctx, I, Ilen);
-		EVP_DigestFinal_ex(&ctx, Ai, NULL);
-		for (j = 1; j < iter; j++) {
-			EVP_DigestInit_ex(&ctx, md_type, NULL);
-			EVP_DigestUpdate(&ctx, Ai, u);
-			EVP_DigestFinal_ex(&ctx, Ai, NULL);
-		}
-		memcpy (out, Ai, min (n, u));
-		if (u >= n) {
-			OPENSSL_free (Ai);
-			OPENSSL_free (B);
-			OPENSSL_free (D);
-			OPENSSL_free (I);
-			BN_free (Ij);
-			BN_free (Bpl1);
-			EVP_MD_CTX_cleanup(&ctx);
-#ifdef DEBUG_KEYGEN
-			fprintf(stderr, "Output KEY (length %d)\n", tmpn);
-			h__dump(tmpout, tmpn);
-#endif
-			return 1;	
-		}
-		n -= u;
-		out += u;
-		for (j = 0; j < v; j++) B[j] = Ai[j % u];
-		/* Work out B + 1 first then can use B as tmp space */
-		BN_bin2bn (B, v, Bpl1);
-		BN_add_word (Bpl1, 1);
-		for (j = 0; j < Ilen ; j+=v) {
-			BN_bin2bn (I + j, v, Ij);
-			BN_add (Ij, Ij, Bpl1);
-			BN_bn2bin (Ij, B);
-			Ijlen = BN_num_bytes (Ij);
-			/* If more than 2^(v*8) - 1 cut off MSB */
-			if (Ijlen > v) {
-				BN_bn2bin (Ij, B);
-				memcpy (I + j, B + 1, v);
-#ifndef PKCS12_BROKEN_KEYGEN
-			/* If less than v bytes pad with zeroes */
-			} else if (Ijlen < v) {
-				memset(I + j, 0, v - Ijlen);
-				BN_bn2bin(Ij, I + j + v - Ijlen); 
-#endif
-			} else BN_bn2bin (Ij, I + j);
-		}
-	}
-}
-#ifdef DEBUG_KEYGEN
-void h__dump (unsigned char *p, int len)
-{
-	for (; len --; p++) fprintf(stderr, "%02X", *p);
-	fprintf(stderr, "\n");	
-}
-#endif
diff --git a/crypto/openssl/crypto/pkcs12/p12_kiss.c b/crypto/openssl/crypto/pkcs12/p12_kiss.c
deleted file mode 100644
index c2ee2cc6f3a7..000000000000
--- a/crypto/openssl/crypto/pkcs12/p12_kiss.c
+++ /dev/null
@@ -1,297 +0,0 @@
-/* p12_kiss.c */
-/* Written by Dr Stephen N Henson (shenson@bigfoot.com) for the OpenSSL
- * project 1999.
- */
-/* ====================================================================
- * Copyright (c) 1999 The OpenSSL Project.  All rights reserved.
- *
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions
- * are met:
- *
- * 1. Redistributions of source code must retain the above copyright
- *    notice, this list of conditions and the following disclaimer. 
- *
- * 2. Redistributions in binary form must reproduce the above copyright
- *    notice, this list of conditions and the following disclaimer in
- *    the documentation and/or other materials provided with the
- *    distribution.
- *
- * 3. All advertising materials mentioning features or use of this
- *    software must display the following acknowledgment:
- *    "This product includes software developed by the OpenSSL Project
- *    for use in the OpenSSL Toolkit. (http://www.OpenSSL.org/)"
- *
- * 4. The names "OpenSSL Toolkit" and "OpenSSL Project" must not be used to
- *    endorse or promote products derived from this software without
- *    prior written permission. For written permission, please contact
- *    licensing@OpenSSL.org.
- *
- * 5. Products derived from this software may not be called "OpenSSL"
- *    nor may "OpenSSL" appear in their names without prior written
- *    permission of the OpenSSL Project.
- *
- * 6. Redistributions of any form whatsoever must retain the following
- *    acknowledgment:
- *    "This product includes software developed by the OpenSSL Project
- *    for use in the OpenSSL Toolkit (http://www.OpenSSL.org/)"
- *
- * THIS SOFTWARE IS PROVIDED BY THE OpenSSL PROJECT ``AS IS'' AND ANY
- * EXPRESSED OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
- * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR
- * PURPOSE ARE DISCLAIMED.  IN NO EVENT SHALL THE OpenSSL PROJECT OR
- * ITS CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
- * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
- * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
- * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
- * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
- * STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
- * ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED
- * OF THE POSSIBILITY OF SUCH DAMAGE.
- * ====================================================================
- *
- * This product includes cryptographic software written by Eric Young
- * (eay@cryptsoft.com).  This product includes software written by Tim
- * Hudson (tjh@cryptsoft.com).
- *
- */
-
-#include <stdio.h>
-#include "cryptlib.h"
-#include <openssl/pkcs12.h>
-
-/* Simplified PKCS#12 routines */
-
-static int parse_pk12( PKCS12 *p12, const char *pass, int passlen,
-		EVP_PKEY **pkey, X509 **cert, STACK_OF(X509) **ca);
-
-static int parse_bags( STACK_OF(PKCS12_SAFEBAG) *bags, const char *pass,
-		       int passlen, EVP_PKEY **pkey, X509 **cert,
-		       STACK_OF(X509) **ca, ASN1_OCTET_STRING **keyid,
-		       char *keymatch);
-
-static int parse_bag( PKCS12_SAFEBAG *bag, const char *pass, int passlen,
-			EVP_PKEY **pkey, X509 **cert, STACK_OF(X509) **ca,
-			ASN1_OCTET_STRING **keyid, char *keymatch);
-
-/* Parse and decrypt a PKCS#12 structure returning user key, user cert
- * and other (CA) certs. Note either ca should be NULL, *ca should be NULL,
- * or it should point to a valid STACK structure. pkey and cert can be
- * passed unitialised.
- */
-
-int PKCS12_parse(PKCS12 *p12, const char *pass, EVP_PKEY **pkey, X509 **cert,
-	     STACK_OF(X509) **ca)
-{
-
-	/* Check for NULL PKCS12 structure */
-
-	if(!p12) {
-		PKCS12err(PKCS12_F_PKCS12_PARSE,PKCS12_R_INVALID_NULL_PKCS12_POINTER);
-		return 0;
-	}
-
-	/* Allocate stack for ca certificates if needed */
-	if ((ca != NULL) && (*ca == NULL)) {
-		if (!(*ca = sk_X509_new_null())) {
-			PKCS12err(PKCS12_F_PKCS12_PARSE,ERR_R_MALLOC_FAILURE);
-			return 0;
-		}
-	}
-
-	if(pkey) *pkey = NULL;
-	if(cert) *cert = NULL;
-
-	/* Check the mac */
-
-	/* If password is zero length or NULL then try verifying both cases
-	 * to determine which password is correct. The reason for this is that
-	 * under PKCS#12 password based encryption no password and a zero length
-	 * password are two different things...
-	 */
-
-	if(!pass || !*pass) {
-		if(PKCS12_verify_mac(p12, NULL, 0)) pass = NULL;
-		else if(PKCS12_verify_mac(p12, "", 0)) pass = "";
-		else {
-			PKCS12err(PKCS12_F_PKCS12_PARSE,PKCS12_R_MAC_VERIFY_FAILURE);
-			goto err;
-		}
-	} else if (!PKCS12_verify_mac(p12, pass, -1)) {
-		PKCS12err(PKCS12_F_PKCS12_PARSE,PKCS12_R_MAC_VERIFY_FAILURE);
-		goto err;
-	}
-
-	if (!parse_pk12 (p12, pass, -1, pkey, cert, ca))
-		{
-		PKCS12err(PKCS12_F_PKCS12_PARSE,PKCS12_R_PARSE_ERROR);
-		goto err;
-		}
-
-	return 1;
-
- err:
-
-	if (pkey && *pkey) EVP_PKEY_free(*pkey);
-	if (cert && *cert) X509_free(*cert);
-	if (ca) sk_X509_pop_free(*ca, X509_free);
-	return 0;
-
-}
-
-/* Parse the outer PKCS#12 structure */
-
-static int parse_pk12(PKCS12 *p12, const char *pass, int passlen,
-	     EVP_PKEY **pkey, X509 **cert, STACK_OF(X509) **ca)
-{
-	STACK_OF(PKCS7) *asafes;
-	STACK_OF(PKCS12_SAFEBAG) *bags;
-	int i, bagnid;
-	PKCS7 *p7;
-	ASN1_OCTET_STRING *keyid = NULL;
-
-	char keymatch = 0;
-	if (!(asafes = PKCS12_unpack_authsafes (p12))) return 0;
-	for (i = 0; i < sk_PKCS7_num (asafes); i++) {
-		p7 = sk_PKCS7_value (asafes, i);
-		bagnid = OBJ_obj2nid (p7->type);
-		if (bagnid == NID_pkcs7_data) {
-			bags = PKCS12_unpack_p7data(p7);
-		} else if (bagnid == NID_pkcs7_encrypted) {
-			bags = PKCS12_unpack_p7encdata(p7, pass, passlen);
-		} else continue;
-		if (!bags) {
-			sk_PKCS7_pop_free(asafes, PKCS7_free);
-			return 0;
-		}
-	    	if (!parse_bags(bags, pass, passlen, pkey, cert, ca,
-							 &keyid, &keymatch)) {
-			sk_PKCS12_SAFEBAG_pop_free(bags, PKCS12_SAFEBAG_free);
-			sk_PKCS7_pop_free(asafes, PKCS7_free);
-			return 0;
-		}
-		sk_PKCS12_SAFEBAG_pop_free(bags, PKCS12_SAFEBAG_free);
-	}
-	sk_PKCS7_pop_free(asafes, PKCS7_free);
-	if (keyid) M_ASN1_OCTET_STRING_free(keyid);
-	return 1;
-}
-
-
-static int parse_bags(STACK_OF(PKCS12_SAFEBAG) *bags, const char *pass,
-		      int passlen, EVP_PKEY **pkey, X509 **cert,
-		      STACK_OF(X509) **ca, ASN1_OCTET_STRING **keyid,
-		      char *keymatch)
-{
-	int i;
-	for (i = 0; i < sk_PKCS12_SAFEBAG_num(bags); i++) {
-		if (!parse_bag(sk_PKCS12_SAFEBAG_value (bags, i),
-			 pass, passlen, pkey, cert, ca, keyid,
-							 keymatch)) return 0;
-	}
-	return 1;
-}
-
-#define MATCH_KEY  0x1
-#define MATCH_CERT 0x2
-#define MATCH_ALL  0x3
-
-static int parse_bag(PKCS12_SAFEBAG *bag, const char *pass, int passlen,
-		     EVP_PKEY **pkey, X509 **cert, STACK_OF(X509) **ca,
-		     ASN1_OCTET_STRING **keyid,
-		     char *keymatch)
-{
-	PKCS8_PRIV_KEY_INFO *p8;
-	X509 *x509;
-	ASN1_OCTET_STRING *lkey = NULL, *ckid = NULL;
-	ASN1_TYPE *attrib;
-	ASN1_BMPSTRING *fname = NULL;
-
-	if ((attrib = PKCS12_get_attr (bag, NID_friendlyName)))
-		fname = attrib->value.bmpstring;
-
-	if ((attrib = PKCS12_get_attr (bag, NID_localKeyID))) {
-		lkey = attrib->value.octet_string;
-		ckid = lkey;
-	}
-
-	/* Check for any local key id matching (if needed) */
-	if (lkey && ((*keymatch & MATCH_ALL) != MATCH_ALL)) {
-		if (*keyid) {
-			if (M_ASN1_OCTET_STRING_cmp(*keyid, lkey)) lkey = NULL;
-		} else {
-			if (!(*keyid = M_ASN1_OCTET_STRING_dup(lkey))) {
-				PKCS12err(PKCS12_F_PARSE_BAG,ERR_R_MALLOC_FAILURE);
-				return 0;
-		    }
-		}
-	}
-	
-	switch (M_PKCS12_bag_type(bag))
-	{
-	case NID_keyBag:
-		if (!lkey || !pkey) return 1;	
-		if (!(*pkey = EVP_PKCS82PKEY(bag->value.keybag))) return 0;
-		*keymatch |= MATCH_KEY;
-	break;
-
-	case NID_pkcs8ShroudedKeyBag:
-		if (!lkey || !pkey) return 1;	
-		if (!(p8 = PKCS12_decrypt_skey(bag, pass, passlen)))
-				return 0;
-		*pkey = EVP_PKCS82PKEY(p8);
-		PKCS8_PRIV_KEY_INFO_free(p8);
-		if (!(*pkey)) return 0;
-		*keymatch |= MATCH_KEY;
-	break;
-
-	case NID_certBag:
-		if (M_PKCS12_cert_bag_type(bag) != NID_x509Certificate )
-								 return 1;
-		if (!(x509 = PKCS12_certbag2x509(bag))) return 0;
-		if(ckid)
-			{
-			if (!X509_keyid_set1(x509, ckid->data, ckid->length))
-				{
-				X509_free(x509);
-				return 0;
-				}
-			}
-		if(fname) {
-			int len, r;
-			unsigned char *data;
-			len = ASN1_STRING_to_UTF8(&data, fname);
-			if(len > 0) {
-				r = X509_alias_set1(x509, data, len);
-				OPENSSL_free(data);
-				if (!r)
-					{
-					X509_free(x509);
-					return 0;
-					}
-			}
-		}
-
-
-		if (lkey) {
-			*keymatch |= MATCH_CERT;
-			if (cert) *cert = x509;
-			else X509_free(x509);
-		} else {
-			if(ca) sk_X509_push (*ca, x509);
-			else X509_free(x509);
-		}
-	break;
-
-	case NID_safeContentsBag:
-		return parse_bags(bag->value.safes, pass, passlen,
-			 		pkey, cert, ca, keyid, keymatch);
-	break;
-
-	default:
-		return 1;
-	break;
-	}
-	return 1;
-}
-
diff --git a/crypto/openssl/crypto/pkcs12/p12_mutl.c b/crypto/openssl/crypto/pkcs12/p12_mutl.c
deleted file mode 100644
index c408cc8ab8df..000000000000
--- a/crypto/openssl/crypto/pkcs12/p12_mutl.c
+++ /dev/null
@@ -1,182 +0,0 @@
-/* p12_mutl.c */
-/* Written by Dr Stephen N Henson (shenson@bigfoot.com) for the OpenSSL
- * project 1999.
- */
-/* ====================================================================
- * Copyright (c) 1999 The OpenSSL Project.  All rights reserved.
- *
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions
- * are met:
- *
- * 1. Redistributions of source code must retain the above copyright
- *    notice, this list of conditions and the following disclaimer. 
- *
- * 2. Redistributions in binary form must reproduce the above copyright
- *    notice, this list of conditions and the following disclaimer in
- *    the documentation and/or other materials provided with the
- *    distribution.
- *
- * 3. All advertising materials mentioning features or use of this
- *    software must display the following acknowledgment:
- *    "This product includes software developed by the OpenSSL Project
- *    for use in the OpenSSL Toolkit. (http://www.OpenSSL.org/)"
- *
- * 4. The names "OpenSSL Toolkit" and "OpenSSL Project" must not be used to
- *    endorse or promote products derived from this software without
- *    prior written permission. For written permission, please contact
- *    licensing@OpenSSL.org.
- *
- * 5. Products derived from this software may not be called "OpenSSL"
- *    nor may "OpenSSL" appear in their names without prior written
- *    permission of the OpenSSL Project.
- *
- * 6. Redistributions of any form whatsoever must retain the following
- *    acknowledgment:
- *    "This product includes software developed by the OpenSSL Project
- *    for use in the OpenSSL Toolkit (http://www.OpenSSL.org/)"
- *
- * THIS SOFTWARE IS PROVIDED BY THE OpenSSL PROJECT ``AS IS'' AND ANY
- * EXPRESSED OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
- * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR
- * PURPOSE ARE DISCLAIMED.  IN NO EVENT SHALL THE OpenSSL PROJECT OR
- * ITS CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
- * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
- * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
- * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
- * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
- * STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
- * ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED
- * OF THE POSSIBILITY OF SUCH DAMAGE.
- * ====================================================================
- *
- * This product includes cryptographic software written by Eric Young
- * (eay@cryptsoft.com).  This product includes software written by Tim
- * Hudson (tjh@cryptsoft.com).
- *
- */
-
-#ifndef OPENSSL_NO_HMAC
-#include <stdio.h>
-#include "cryptlib.h"
-#include <openssl/hmac.h>
-#include <openssl/rand.h>
-#include <openssl/pkcs12.h>
-
-/* Generate a MAC */
-int PKCS12_gen_mac(PKCS12 *p12, const char *pass, int passlen,
-		   unsigned char *mac, unsigned int *maclen)
-{
-	const EVP_MD *md_type;
-	HMAC_CTX hmac;
-	unsigned char key[EVP_MAX_MD_SIZE], *salt;
-	int saltlen, iter;
-
-	if (!PKCS7_type_is_data(p12->authsafes))
-		{
-		PKCS12err(PKCS12_F_PKCS12_GEN_MAC,PKCS12_R_CONTENT_TYPE_NOT_DATA);
-		return 0;
-		}
-
-	salt = p12->mac->salt->data;
-	saltlen = p12->mac->salt->length;
-	if (!p12->mac->iter) iter = 1;
-	else iter = ASN1_INTEGER_get (p12->mac->iter);
-    	if(!(md_type =
-		 EVP_get_digestbyobj (p12->mac->dinfo->algor->algorithm))) {
-		PKCS12err(PKCS12_F_PKCS12_GEN_MAC,PKCS12_R_UNKNOWN_DIGEST_ALGORITHM);
-		return 0;
-	}
-	if(!PKCS12_key_gen (pass, passlen, salt, saltlen, PKCS12_MAC_ID, iter,
-				 EVP_MD_size(md_type), key, md_type)) {
-		PKCS12err(PKCS12_F_PKCS12_GEN_MAC,PKCS12_R_KEY_GEN_ERROR);
-		return 0;
-	}
-	HMAC_CTX_init(&hmac);
-	HMAC_Init_ex(&hmac, key, EVP_MD_size(md_type), md_type, NULL);
-    	HMAC_Update(&hmac, p12->authsafes->d.data->data,
-					 p12->authsafes->d.data->length);
-    	HMAC_Final(&hmac, mac, maclen);
-    	HMAC_CTX_cleanup(&hmac);
-	return 1;
-}
-
-/* Verify the mac */
-int PKCS12_verify_mac(PKCS12 *p12, const char *pass, int passlen)
-{
-	unsigned char mac[EVP_MAX_MD_SIZE];
-	unsigned int maclen;
-	if(p12->mac == NULL) {
-		PKCS12err(PKCS12_F_PKCS12_VERIFY_MAC,PKCS12_R_MAC_ABSENT);
-		return 0;
-	}
-	if (!PKCS12_gen_mac (p12, pass, passlen, mac, &maclen)) {
-		PKCS12err(PKCS12_F_PKCS12_VERIFY_MAC,PKCS12_R_MAC_GENERATION_ERROR);
-		return 0;
-	}
-	if ((maclen != (unsigned int)p12->mac->dinfo->digest->length)
-	|| memcmp (mac, p12->mac->dinfo->digest->data, maclen)) return 0;
-	return 1;
-}
-
-/* Set a mac */
-
-int PKCS12_set_mac(PKCS12 *p12, const char *pass, int passlen,
-	     unsigned char *salt, int saltlen, int iter, const EVP_MD *md_type)
-{
-	unsigned char mac[EVP_MAX_MD_SIZE];
-	unsigned int maclen;
-
-	if (!md_type) md_type = EVP_sha1();
-	if (PKCS12_setup_mac (p12, iter, salt, saltlen, md_type) ==
-				 	PKCS12_ERROR) {
-		PKCS12err(PKCS12_F_PKCS12_SET_MAC,PKCS12_R_MAC_SETUP_ERROR);
-		return 0;
-	}
-	if (!PKCS12_gen_mac (p12, pass, passlen, mac, &maclen)) {
-		PKCS12err(PKCS12_F_PKCS12_SET_MAC,PKCS12_R_MAC_GENERATION_ERROR);
-		return 0;
-	}
-	if (!(M_ASN1_OCTET_STRING_set (p12->mac->dinfo->digest, mac, maclen))) {
-		PKCS12err(PKCS12_F_PKCS12_SET_MAC,PKCS12_R_MAC_STRING_SET_ERROR);
-						return 0;
-	}
-	return 1;
-}
-
-/* Set up a mac structure */
-int PKCS12_setup_mac(PKCS12 *p12, int iter, unsigned char *salt, int saltlen,
-	     const EVP_MD *md_type)
-{
-	if (!(p12->mac = PKCS12_MAC_DATA_new())) return PKCS12_ERROR;
-	if (iter > 1) {
-		if(!(p12->mac->iter = M_ASN1_INTEGER_new())) {
-			PKCS12err(PKCS12_F_PKCS12_SETUP_MAC, ERR_R_MALLOC_FAILURE);
-			return 0;
-		}
-		if (!ASN1_INTEGER_set(p12->mac->iter, iter)) {
-			PKCS12err(PKCS12_F_PKCS12_SETUP_MAC, ERR_R_MALLOC_FAILURE);
-			return 0;
-		}
-	}
-	if (!saltlen) saltlen = PKCS12_SALT_LEN;
-	p12->mac->salt->length = saltlen;
-	if (!(p12->mac->salt->data = OPENSSL_malloc (saltlen))) {
-		PKCS12err(PKCS12_F_PKCS12_SETUP_MAC, ERR_R_MALLOC_FAILURE);
-		return 0;
-	}
-	if (!salt) {
-		if (RAND_pseudo_bytes (p12->mac->salt->data, saltlen) < 0)
-			return 0;
-	}
-	else memcpy (p12->mac->salt->data, salt, saltlen);
-	p12->mac->dinfo->algor->algorithm = OBJ_nid2obj(EVP_MD_type(md_type));
-	if (!(p12->mac->dinfo->algor->parameter = ASN1_TYPE_new())) {
-		PKCS12err(PKCS12_F_PKCS12_SETUP_MAC, ERR_R_MALLOC_FAILURE);
-		return 0;
-	}
-	p12->mac->dinfo->algor->parameter->type = V_ASN1_NULL;
-	
-	return 1;
-}
-#endif
diff --git a/crypto/openssl/crypto/pkcs12/p12_npas.c b/crypto/openssl/crypto/pkcs12/p12_npas.c
deleted file mode 100644
index 48eacc5c49c4..000000000000
--- a/crypto/openssl/crypto/pkcs12/p12_npas.c
+++ /dev/null
@@ -1,216 +0,0 @@
-/* p12_npas.c */
-/* Written by Dr Stephen N Henson (shenson@bigfoot.com) for the OpenSSL
- * project 1999.
- */
-/* ====================================================================
- * Copyright (c) 1999 The OpenSSL Project.  All rights reserved.
- *
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions
- * are met:
- *
- * 1. Redistributions of source code must retain the above copyright
- *    notice, this list of conditions and the following disclaimer. 
- *
- * 2. Redistributions in binary form must reproduce the above copyright
- *    notice, this list of conditions and the following disclaimer in
- *    the documentation and/or other materials provided with the
- *    distribution.
- *
- * 3. All advertising materials mentioning features or use of this
- *    software must display the following acknowledgment:
- *    "This product includes software developed by the OpenSSL Project
- *    for use in the OpenSSL Toolkit. (http://www.OpenSSL.org/)"
- *
- * 4. The names "OpenSSL Toolkit" and "OpenSSL Project" must not be used to
- *    endorse or promote products derived from this software without
- *    prior written permission. For written permission, please contact
- *    licensing@OpenSSL.org.
- *
- * 5. Products derived from this software may not be called "OpenSSL"
- *    nor may "OpenSSL" appear in their names without prior written
- *    permission of the OpenSSL Project.
- *
- * 6. Redistributions of any form whatsoever must retain the following
- *    acknowledgment:
- *    "This product includes software developed by the OpenSSL Project
- *    for use in the OpenSSL Toolkit (http://www.OpenSSL.org/)"
- *
- * THIS SOFTWARE IS PROVIDED BY THE OpenSSL PROJECT ``AS IS'' AND ANY
- * EXPRESSED OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
- * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR
- * PURPOSE ARE DISCLAIMED.  IN NO EVENT SHALL THE OpenSSL PROJECT OR
- * ITS CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
- * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
- * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
- * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
- * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
- * STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
- * ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED
- * OF THE POSSIBILITY OF SUCH DAMAGE.
- * ====================================================================
- *
- * This product includes cryptographic software written by Eric Young
- * (eay@cryptsoft.com).  This product includes software written by Tim
- * Hudson (tjh@cryptsoft.com).
- *
- */
-
-#include <stdio.h>
-#include <stdlib.h>
-#include <string.h>
-#include <openssl/pem.h>
-#include <openssl/err.h>
-#include <openssl/pkcs12.h>
-
-/* PKCS#12 password change routine */
-
-static int newpass_p12(PKCS12 *p12, char *oldpass, char *newpass);
-static int newpass_bags(STACK_OF(PKCS12_SAFEBAG) *bags, char *oldpass,
-			char *newpass);
-static int newpass_bag(PKCS12_SAFEBAG *bag, char *oldpass, char *newpass);
-static int alg_get(X509_ALGOR *alg, int *pnid, int *piter, int *psaltlen);
-
-/* 
- * Change the password on a PKCS#12 structure.
- */
-
-int PKCS12_newpass(PKCS12 *p12, char *oldpass, char *newpass)
-{
-	/* Check for NULL PKCS12 structure */
-
-	if(!p12) {
-		PKCS12err(PKCS12_F_PKCS12_NEWPASS,PKCS12_R_INVALID_NULL_PKCS12_POINTER);
-		return 0;
-	}
-
-	/* Check the mac */
-	
-	if (!PKCS12_verify_mac(p12, oldpass, -1)) {
-		PKCS12err(PKCS12_F_PKCS12_NEWPASS,PKCS12_R_MAC_VERIFY_FAILURE);
-		return 0;
-	}
-
-	if (!newpass_p12(p12, oldpass, newpass)) {
-		PKCS12err(PKCS12_F_PKCS12_NEWPASS,PKCS12_R_PARSE_ERROR);
-		return 0;
-	}
-
-	return 1;
-}
-
-/* Parse the outer PKCS#12 structure */
-
-static int newpass_p12(PKCS12 *p12, char *oldpass, char *newpass)
-{
-	STACK_OF(PKCS7) *asafes, *newsafes;
-	STACK_OF(PKCS12_SAFEBAG) *bags;
-	int i, bagnid, pbe_nid = 0, pbe_iter = 0, pbe_saltlen = 0;
-	PKCS7 *p7, *p7new;
-	ASN1_OCTET_STRING *p12_data_tmp = NULL, *macnew = NULL;
-	unsigned char mac[EVP_MAX_MD_SIZE];
-	unsigned int maclen;
-
-	if (!(asafes = PKCS12_unpack_authsafes(p12))) return 0;
-	if(!(newsafes = sk_PKCS7_new_null())) return 0;
-	for (i = 0; i < sk_PKCS7_num (asafes); i++) {
-		p7 = sk_PKCS7_value(asafes, i);
-		bagnid = OBJ_obj2nid(p7->type);
-		if (bagnid == NID_pkcs7_data) {
-			bags = PKCS12_unpack_p7data(p7);
-		} else if (bagnid == NID_pkcs7_encrypted) {
-			bags = PKCS12_unpack_p7encdata(p7, oldpass, -1);
-			alg_get(p7->d.encrypted->enc_data->algorithm,
-				&pbe_nid, &pbe_iter, &pbe_saltlen);
-		} else continue;
-		if (!bags) {
-			sk_PKCS7_pop_free(asafes, PKCS7_free);
-			return 0;
-		}
-	    	if (!newpass_bags(bags, oldpass, newpass)) {
-			sk_PKCS12_SAFEBAG_pop_free(bags, PKCS12_SAFEBAG_free);
-			sk_PKCS7_pop_free(asafes, PKCS7_free);
-			return 0;
-		}
-		/* Repack bag in same form with new password */
-		if (bagnid == NID_pkcs7_data) p7new = PKCS12_pack_p7data(bags);
-		else p7new = PKCS12_pack_p7encdata(pbe_nid, newpass, -1, NULL,
-						 pbe_saltlen, pbe_iter, bags);
-		sk_PKCS12_SAFEBAG_pop_free(bags, PKCS12_SAFEBAG_free);
-		if(!p7new) {
-			sk_PKCS7_pop_free(asafes, PKCS7_free);
-			return 0;
-		}
-		sk_PKCS7_push(newsafes, p7new);
-	}
-	sk_PKCS7_pop_free(asafes, PKCS7_free);
-
-	/* Repack safe: save old safe in case of error */
-
-	p12_data_tmp = p12->authsafes->d.data;
-	if(!(p12->authsafes->d.data = ASN1_OCTET_STRING_new())) goto saferr;
-	if(!PKCS12_pack_authsafes(p12, newsafes)) goto saferr;
-
-	if(!PKCS12_gen_mac(p12, newpass, -1, mac, &maclen)) goto saferr;
-	if(!(macnew = ASN1_OCTET_STRING_new())) goto saferr;
-	if(!ASN1_OCTET_STRING_set(macnew, mac, maclen)) goto saferr;
-	ASN1_OCTET_STRING_free(p12->mac->dinfo->digest);
-	p12->mac->dinfo->digest = macnew;
-	ASN1_OCTET_STRING_free(p12_data_tmp);
-
-	return 1;
-
-	saferr:
-	/* Restore old safe */
-	ASN1_OCTET_STRING_free(p12->authsafes->d.data);
-	ASN1_OCTET_STRING_free(macnew);
-	p12->authsafes->d.data = p12_data_tmp;
-	return 0;
-
-}
-
-
-static int newpass_bags(STACK_OF(PKCS12_SAFEBAG) *bags, char *oldpass,
-			char *newpass)
-{
-	int i;
-	for (i = 0; i < sk_PKCS12_SAFEBAG_num(bags); i++) {
-		if (!newpass_bag(sk_PKCS12_SAFEBAG_value(bags, i),
-				 oldpass, newpass))
-		    return 0;
-	}
-	return 1;
-}
-
-/* Change password of safebag: only needs handle shrouded keybags */
-
-static int newpass_bag(PKCS12_SAFEBAG *bag, char *oldpass, char *newpass)
-{
-	PKCS8_PRIV_KEY_INFO *p8;
-	X509_SIG *p8new;
-	int p8_nid, p8_saltlen, p8_iter;
-
-	if(M_PKCS12_bag_type(bag) != NID_pkcs8ShroudedKeyBag) return 1;
-
-	if (!(p8 = PKCS8_decrypt(bag->value.shkeybag, oldpass, -1))) return 0;
-	alg_get(bag->value.shkeybag->algor, &p8_nid, &p8_iter, &p8_saltlen);
-	if(!(p8new = PKCS8_encrypt(p8_nid, NULL, newpass, -1, NULL, p8_saltlen,
-						     p8_iter, p8))) return 0;
-	X509_SIG_free(bag->value.shkeybag);
-	bag->value.shkeybag = p8new;
-	return 1;
-}
-
-static int alg_get(X509_ALGOR *alg, int *pnid, int *piter, int *psaltlen)
-{
-        PBEPARAM *pbe;
-        const unsigned char *p;
-
-        p = alg->parameter->value.sequence->data;
-        pbe = d2i_PBEPARAM(NULL, &p, alg->parameter->value.sequence->length);
-        *pnid = OBJ_obj2nid(alg->algorithm);
-	*piter = ASN1_INTEGER_get(pbe->iter);
-	*psaltlen = pbe->salt->length;
-        PBEPARAM_free(pbe);
-        return 0;
-}
diff --git a/crypto/openssl/crypto/pkcs12/p12_p8d.c b/crypto/openssl/crypto/pkcs12/p12_p8d.c
deleted file mode 100644
index 3c6f377933c4..000000000000
--- a/crypto/openssl/crypto/pkcs12/p12_p8d.c
+++ /dev/null
@@ -1,68 +0,0 @@
-/* p12_p8d.c */
-/* Written by Dr Stephen N Henson (shenson@bigfoot.com) for the OpenSSL
- * project 2001.
- */
-/* ====================================================================
- * Copyright (c) 2001 The OpenSSL Project.  All rights reserved.
- *
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions
- * are met:
- *
- * 1. Redistributions of source code must retain the above copyright
- *    notice, this list of conditions and the following disclaimer. 
- *
- * 2. Redistributions in binary form must reproduce the above copyright
- *    notice, this list of conditions and the following disclaimer in
- *    the documentation and/or other materials provided with the
- *    distribution.
- *
- * 3. All advertising materials mentioning features or use of this
- *    software must display the following acknowledgment:
- *    "This product includes software developed by the OpenSSL Project
- *    for use in the OpenSSL Toolkit. (http://www.OpenSSL.org/)"
- *
- * 4. The names "OpenSSL Toolkit" and "OpenSSL Project" must not be used to
- *    endorse or promote products derived from this software without
- *    prior written permission. For written permission, please contact
- *    licensing@OpenSSL.org.
- *
- * 5. Products derived from this software may not be called "OpenSSL"
- *    nor may "OpenSSL" appear in their names without prior written
- *    permission of the OpenSSL Project.
- *
- * 6. Redistributions of any form whatsoever must retain the following
- *    acknowledgment:
- *    "This product includes software developed by the OpenSSL Project
- *    for use in the OpenSSL Toolkit (http://www.OpenSSL.org/)"
- *
- * THIS SOFTWARE IS PROVIDED BY THE OpenSSL PROJECT ``AS IS'' AND ANY
- * EXPRESSED OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
- * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR
- * PURPOSE ARE DISCLAIMED.  IN NO EVENT SHALL THE OpenSSL PROJECT OR
- * ITS CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
- * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
- * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
- * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
- * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
- * STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
- * ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED
- * OF THE POSSIBILITY OF SUCH DAMAGE.
- * ====================================================================
- *
- * This product includes cryptographic software written by Eric Young
- * (eay@cryptsoft.com).  This product includes software written by Tim
- * Hudson (tjh@cryptsoft.com).
- *
- */
-
-#include <stdio.h>
-#include "cryptlib.h"
-#include <openssl/pkcs12.h>
-
-PKCS8_PRIV_KEY_INFO *PKCS8_decrypt(X509_SIG *p8, const char *pass, int passlen)
-{
-	return PKCS12_item_decrypt_d2i(p8->algor, ASN1_ITEM_rptr(PKCS8_PRIV_KEY_INFO), pass,
-					passlen, p8->digest, 1);
-}
-
diff --git a/crypto/openssl/crypto/pkcs12/p12_p8e.c b/crypto/openssl/crypto/pkcs12/p12_p8e.c
deleted file mode 100644
index 3d47956652a8..000000000000
--- a/crypto/openssl/crypto/pkcs12/p12_p8e.c
+++ /dev/null
@@ -1,97 +0,0 @@
-/* p12_p8e.c */
-/* Written by Dr Stephen N Henson (shenson@bigfoot.com) for the OpenSSL
- * project 2001.
- */
-/* ====================================================================
- * Copyright (c) 2001 The OpenSSL Project.  All rights reserved.
- *
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions
- * are met:
- *
- * 1. Redistributions of source code must retain the above copyright
- *    notice, this list of conditions and the following disclaimer. 
- *
- * 2. Redistributions in binary form must reproduce the above copyright
- *    notice, this list of conditions and the following disclaimer in
- *    the documentation and/or other materials provided with the
- *    distribution.
- *
- * 3. All advertising materials mentioning features or use of this
- *    software must display the following acknowledgment:
- *    "This product includes software developed by the OpenSSL Project
- *    for use in the OpenSSL Toolkit. (http://www.OpenSSL.org/)"
- *
- * 4. The names "OpenSSL Toolkit" and "OpenSSL Project" must not be used to
- *    endorse or promote products derived from this software without
- *    prior written permission. For written permission, please contact
- *    licensing@OpenSSL.org.
- *
- * 5. Products derived from this software may not be called "OpenSSL"
- *    nor may "OpenSSL" appear in their names without prior written
- *    permission of the OpenSSL Project.
- *
- * 6. Redistributions of any form whatsoever must retain the following
- *    acknowledgment:
- *    "This product includes software developed by the OpenSSL Project
- *    for use in the OpenSSL Toolkit (http://www.OpenSSL.org/)"
- *
- * THIS SOFTWARE IS PROVIDED BY THE OpenSSL PROJECT ``AS IS'' AND ANY
- * EXPRESSED OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
- * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR
- * PURPOSE ARE DISCLAIMED.  IN NO EVENT SHALL THE OpenSSL PROJECT OR
- * ITS CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
- * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
- * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
- * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
- * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
- * STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
- * ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED
- * OF THE POSSIBILITY OF SUCH DAMAGE.
- * ====================================================================
- *
- * This product includes cryptographic software written by Eric Young
- * (eay@cryptsoft.com).  This product includes software written by Tim
- * Hudson (tjh@cryptsoft.com).
- *
- */
-
-#include <stdio.h>
-#include "cryptlib.h"
-#include <openssl/pkcs12.h>
-
-X509_SIG *PKCS8_encrypt(int pbe_nid, const EVP_CIPHER *cipher,
-			 const char *pass, int passlen,
-			 unsigned char *salt, int saltlen, int iter,
-						PKCS8_PRIV_KEY_INFO *p8inf)
-{
-	X509_SIG *p8 = NULL;
-	X509_ALGOR *pbe;
-
-	if (!(p8 = X509_SIG_new())) {
-		PKCS12err(PKCS12_F_PKCS8_ENCRYPT, ERR_R_MALLOC_FAILURE);
-		goto err;
-	}
-
-	if(pbe_nid == -1) pbe = PKCS5_pbe2_set(cipher, iter, salt, saltlen);
-	else pbe = PKCS5_pbe_set(pbe_nid, iter, salt, saltlen);
-	if(!pbe) {
-		PKCS12err(PKCS12_F_PKCS8_ENCRYPT, ERR_R_ASN1_LIB);
-		goto err;
-	}
-	X509_ALGOR_free(p8->algor);
-	p8->algor = pbe;
-	M_ASN1_OCTET_STRING_free(p8->digest);
-	p8->digest = PKCS12_item_i2d_encrypt(pbe, ASN1_ITEM_rptr(PKCS8_PRIV_KEY_INFO),
-					pass, passlen, p8inf, 1);
-	if(!p8->digest) {
-		PKCS12err(PKCS12_F_PKCS8_ENCRYPT, PKCS12_R_ENCRYPT_ERROR);
-		goto err;
-	}
-
-	return p8;
-
-	err:
-	X509_SIG_free(p8);
-	return NULL;
-}
diff --git a/crypto/openssl/crypto/pkcs12/p12_utl.c b/crypto/openssl/crypto/pkcs12/p12_utl.c
deleted file mode 100644
index 243ec76be95c..000000000000
--- a/crypto/openssl/crypto/pkcs12/p12_utl.c
+++ /dev/null
@@ -1,146 +0,0 @@
-/* p12_utl.c */
-/* Written by Dr Stephen N Henson (shenson@bigfoot.com) for the OpenSSL
- * project 1999.
- */
-/* ====================================================================
- * Copyright (c) 1999 The OpenSSL Project.  All rights reserved.
- *
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions
- * are met:
- *
- * 1. Redistributions of source code must retain the above copyright
- *    notice, this list of conditions and the following disclaimer. 
- *
- * 2. Redistributions in binary form must reproduce the above copyright
- *    notice, this list of conditions and the following disclaimer in
- *    the documentation and/or other materials provided with the
- *    distribution.
- *
- * 3. All advertising materials mentioning features or use of this
- *    software must display the following acknowledgment:
- *    "This product includes software developed by the OpenSSL Project
- *    for use in the OpenSSL Toolkit. (http://www.OpenSSL.org/)"
- *
- * 4. The names "OpenSSL Toolkit" and "OpenSSL Project" must not be used to
- *    endorse or promote products derived from this software without
- *    prior written permission. For written permission, please contact
- *    licensing@OpenSSL.org.
- *
- * 5. Products derived from this software may not be called "OpenSSL"
- *    nor may "OpenSSL" appear in their names without prior written
- *    permission of the OpenSSL Project.
- *
- * 6. Redistributions of any form whatsoever must retain the following
- *    acknowledgment:
- *    "This product includes software developed by the OpenSSL Project
- *    for use in the OpenSSL Toolkit (http://www.OpenSSL.org/)"
- *
- * THIS SOFTWARE IS PROVIDED BY THE OpenSSL PROJECT ``AS IS'' AND ANY
- * EXPRESSED OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
- * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR
- * PURPOSE ARE DISCLAIMED.  IN NO EVENT SHALL THE OpenSSL PROJECT OR
- * ITS CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
- * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
- * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
- * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
- * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
- * STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
- * ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED
- * OF THE POSSIBILITY OF SUCH DAMAGE.
- * ====================================================================
- *
- * This product includes cryptographic software written by Eric Young
- * (eay@cryptsoft.com).  This product includes software written by Tim
- * Hudson (tjh@cryptsoft.com).
- *
- */
-
-#include <stdio.h>
-#include "cryptlib.h"
-#include <openssl/pkcs12.h>
-
-/* Cheap and nasty Unicode stuff */
-
-unsigned char *asc2uni(const char *asc, int asclen, unsigned char **uni, int *unilen)
-{
-	int ulen, i;
-	unsigned char *unitmp;
-	if (asclen == -1) asclen = strlen(asc);
-	ulen = asclen*2  + 2;
-	if (!(unitmp = OPENSSL_malloc(ulen))) return NULL;
-	for (i = 0; i < ulen - 2; i+=2) {
-		unitmp[i] = 0;
-		unitmp[i + 1] = asc[i>>1];
-	}
-	/* Make result double null terminated */
-	unitmp[ulen - 2] = 0;
-	unitmp[ulen - 1] = 0;
-	if (unilen) *unilen = ulen;
-	if (uni) *uni = unitmp;
-	return unitmp;
-}
-
-char *uni2asc(unsigned char *uni, int unilen)
-{
-	int asclen, i;
-	char *asctmp;
-	asclen = unilen / 2;
-	/* If no terminating zero allow for one */
-	if (!unilen || uni[unilen - 1]) asclen++;
-	uni++;
-	if (!(asctmp = OPENSSL_malloc(asclen))) return NULL;
-	for (i = 0; i < unilen; i+=2) asctmp[i>>1] = uni[i];
-	asctmp[asclen - 1] = 0;
-	return asctmp;
-}
-
-int i2d_PKCS12_bio(BIO *bp, PKCS12 *p12)
-{
-	return ASN1_item_i2d_bio(ASN1_ITEM_rptr(PKCS12), bp, p12);
-}
-
-#ifndef OPENSSL_NO_FP_API
-int i2d_PKCS12_fp(FILE *fp, PKCS12 *p12)
-{
-	return ASN1_item_i2d_fp(ASN1_ITEM_rptr(PKCS12), fp, p12);
-}
-#endif
-
-PKCS12 *d2i_PKCS12_bio(BIO *bp, PKCS12 **p12)
-{
-	return ASN1_item_d2i_bio(ASN1_ITEM_rptr(PKCS12), bp, p12);
-}
-#ifndef OPENSSL_NO_FP_API
-PKCS12 *d2i_PKCS12_fp(FILE *fp, PKCS12 **p12)
-{
-        return ASN1_item_d2i_fp(ASN1_ITEM_rptr(PKCS12), fp, p12);
-}
-#endif
-
-PKCS12_SAFEBAG *PKCS12_x5092certbag(X509 *x509)
-{
-	return PKCS12_item_pack_safebag(x509, ASN1_ITEM_rptr(X509),
-			NID_x509Certificate, NID_certBag);
-}
-
-PKCS12_SAFEBAG *PKCS12_x509crl2certbag(X509_CRL *crl)
-{
-	return PKCS12_item_pack_safebag(crl, ASN1_ITEM_rptr(X509_CRL),
-			NID_x509Crl, NID_crlBag);
-}
-
-X509 *PKCS12_certbag2x509(PKCS12_SAFEBAG *bag)
-{
-	if(M_PKCS12_bag_type(bag) != NID_certBag) return NULL;
-	if(M_PKCS12_cert_bag_type(bag) != NID_x509Certificate) return NULL;
-	return ASN1_item_unpack(bag->value.bag->value.octet, ASN1_ITEM_rptr(X509));
-}
-
-X509_CRL *PKCS12_certbag2x509crl(PKCS12_SAFEBAG *bag)
-{
-	if(M_PKCS12_bag_type(bag) != NID_crlBag) return NULL;
-	if(M_PKCS12_cert_bag_type(bag) != NID_x509Crl) return NULL;
-	return ASN1_item_unpack(bag->value.bag->value.octet,
-							ASN1_ITEM_rptr(X509_CRL));
-}
diff --git a/crypto/openssl/crypto/pkcs12/pk12err.c b/crypto/openssl/crypto/pkcs12/pk12err.c
deleted file mode 100644
index 07a1fb6907b1..000000000000
--- a/crypto/openssl/crypto/pkcs12/pk12err.c
+++ /dev/null
@@ -1,144 +0,0 @@
-/* crypto/pkcs12/pk12err.c */
-/* ====================================================================
- * Copyright (c) 1999-2005 The OpenSSL Project.  All rights reserved.
- *
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions
- * are met:
- *
- * 1. Redistributions of source code must retain the above copyright
- *    notice, this list of conditions and the following disclaimer. 
- *
- * 2. Redistributions in binary form must reproduce the above copyright
- *    notice, this list of conditions and the following disclaimer in
- *    the documentation and/or other materials provided with the
- *    distribution.
- *
- * 3. All advertising materials mentioning features or use of this
- *    software must display the following acknowledgment:
- *    "This product includes software developed by the OpenSSL Project
- *    for use in the OpenSSL Toolkit. (http://www.OpenSSL.org/)"
- *
- * 4. The names "OpenSSL Toolkit" and "OpenSSL Project" must not be used to
- *    endorse or promote products derived from this software without
- *    prior written permission. For written permission, please contact
- *    openssl-core@OpenSSL.org.
- *
- * 5. Products derived from this software may not be called "OpenSSL"
- *    nor may "OpenSSL" appear in their names without prior written
- *    permission of the OpenSSL Project.
- *
- * 6. Redistributions of any form whatsoever must retain the following
- *    acknowledgment:
- *    "This product includes software developed by the OpenSSL Project
- *    for use in the OpenSSL Toolkit (http://www.OpenSSL.org/)"
- *
- * THIS SOFTWARE IS PROVIDED BY THE OpenSSL PROJECT ``AS IS'' AND ANY
- * EXPRESSED OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
- * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR
- * PURPOSE ARE DISCLAIMED.  IN NO EVENT SHALL THE OpenSSL PROJECT OR
- * ITS CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
- * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
- * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
- * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
- * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
- * STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
- * ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED
- * OF THE POSSIBILITY OF SUCH DAMAGE.
- * ====================================================================
- *
- * This product includes cryptographic software written by Eric Young
- * (eay@cryptsoft.com).  This product includes software written by Tim
- * Hudson (tjh@cryptsoft.com).
- *
- */
-
-/* NOTE: this file was auto generated by the mkerr.pl script: any changes
- * made to it will be overwritten when the script next updates this file,
- * only reason strings will be preserved.
- */
-
-#include <stdio.h>
-#include <openssl/err.h>
-#include <openssl/pkcs12.h>
-
-/* BEGIN ERROR CODES */
-#ifndef OPENSSL_NO_ERR
-
-#define ERR_FUNC(func) ERR_PACK(ERR_LIB_PKCS12,func,0)
-#define ERR_REASON(reason) ERR_PACK(ERR_LIB_PKCS12,0,reason)
-
-static ERR_STRING_DATA PKCS12_str_functs[]=
-	{
-{ERR_FUNC(PKCS12_F_PARSE_BAG),	"PARSE_BAG"},
-{ERR_FUNC(PKCS12_F_PARSE_BAGS),	"PARSE_BAGS"},
-{ERR_FUNC(PKCS12_F_PKCS12_ADD_FRIENDLYNAME),	"PKCS12_ADD_FRIENDLYNAME"},
-{ERR_FUNC(PKCS12_F_PKCS12_ADD_FRIENDLYNAME_ASC),	"PKCS12_add_friendlyname_asc"},
-{ERR_FUNC(PKCS12_F_PKCS12_ADD_FRIENDLYNAME_UNI),	"PKCS12_add_friendlyname_uni"},
-{ERR_FUNC(PKCS12_F_PKCS12_ADD_LOCALKEYID),	"PKCS12_add_localkeyid"},
-{ERR_FUNC(PKCS12_F_PKCS12_CREATE),	"PKCS12_create"},
-{ERR_FUNC(PKCS12_F_PKCS12_GEN_MAC),	"PKCS12_gen_mac"},
-{ERR_FUNC(PKCS12_F_PKCS12_INIT),	"PKCS12_init"},
-{ERR_FUNC(PKCS12_F_PKCS12_ITEM_DECRYPT_D2I),	"PKCS12_item_decrypt_d2i"},
-{ERR_FUNC(PKCS12_F_PKCS12_ITEM_I2D_ENCRYPT),	"PKCS12_item_i2d_encrypt"},
-{ERR_FUNC(PKCS12_F_PKCS12_ITEM_PACK_SAFEBAG),	"PKCS12_item_pack_safebag"},
-{ERR_FUNC(PKCS12_F_PKCS12_KEY_GEN_ASC),	"PKCS12_key_gen_asc"},
-{ERR_FUNC(PKCS12_F_PKCS12_KEY_GEN_UNI),	"PKCS12_key_gen_uni"},
-{ERR_FUNC(PKCS12_F_PKCS12_MAKE_KEYBAG),	"PKCS12_MAKE_KEYBAG"},
-{ERR_FUNC(PKCS12_F_PKCS12_MAKE_SHKEYBAG),	"PKCS12_MAKE_SHKEYBAG"},
-{ERR_FUNC(PKCS12_F_PKCS12_NEWPASS),	"PKCS12_newpass"},
-{ERR_FUNC(PKCS12_F_PKCS12_PACK_P7DATA),	"PKCS12_pack_p7data"},
-{ERR_FUNC(PKCS12_F_PKCS12_PACK_P7ENCDATA),	"PKCS12_pack_p7encdata"},
-{ERR_FUNC(PKCS12_F_PKCS12_PARSE),	"PKCS12_parse"},
-{ERR_FUNC(PKCS12_F_PKCS12_PBE_CRYPT),	"PKCS12_pbe_crypt"},
-{ERR_FUNC(PKCS12_F_PKCS12_PBE_KEYIVGEN),	"PKCS12_PBE_keyivgen"},
-{ERR_FUNC(PKCS12_F_PKCS12_SETUP_MAC),	"PKCS12_setup_mac"},
-{ERR_FUNC(PKCS12_F_PKCS12_SET_MAC),	"PKCS12_set_mac"},
-{ERR_FUNC(PKCS12_F_PKCS12_UNPACK_AUTHSAFES),	"PKCS12_unpack_authsafes"},
-{ERR_FUNC(PKCS12_F_PKCS12_UNPACK_P7DATA),	"PKCS12_unpack_p7data"},
-{ERR_FUNC(PKCS12_F_PKCS12_VERIFY_MAC),	"PKCS12_verify_mac"},
-{ERR_FUNC(PKCS12_F_PKCS8_ADD_KEYUSAGE),	"PKCS8_add_keyusage"},
-{ERR_FUNC(PKCS12_F_PKCS8_ENCRYPT),	"PKCS8_encrypt"},
-{0,NULL}
-	};
-
-static ERR_STRING_DATA PKCS12_str_reasons[]=
-	{
-{ERR_REASON(PKCS12_R_CANT_PACK_STRUCTURE),"cant pack structure"},
-{ERR_REASON(PKCS12_R_CONTENT_TYPE_NOT_DATA),"content type not data"},
-{ERR_REASON(PKCS12_R_DECODE_ERROR)       ,"decode error"},
-{ERR_REASON(PKCS12_R_ENCODE_ERROR)       ,"encode error"},
-{ERR_REASON(PKCS12_R_ENCRYPT_ERROR)      ,"encrypt error"},
-{ERR_REASON(PKCS12_R_ERROR_SETTING_ENCRYPTED_DATA_TYPE),"error setting encrypted data type"},
-{ERR_REASON(PKCS12_R_INVALID_NULL_ARGUMENT),"invalid null argument"},
-{ERR_REASON(PKCS12_R_INVALID_NULL_PKCS12_POINTER),"invalid null pkcs12 pointer"},
-{ERR_REASON(PKCS12_R_IV_GEN_ERROR)       ,"iv gen error"},
-{ERR_REASON(PKCS12_R_KEY_GEN_ERROR)      ,"key gen error"},
-{ERR_REASON(PKCS12_R_MAC_ABSENT)         ,"mac absent"},
-{ERR_REASON(PKCS12_R_MAC_GENERATION_ERROR),"mac generation error"},
-{ERR_REASON(PKCS12_R_MAC_SETUP_ERROR)    ,"mac setup error"},
-{ERR_REASON(PKCS12_R_MAC_STRING_SET_ERROR),"mac string set error"},
-{ERR_REASON(PKCS12_R_MAC_VERIFY_ERROR)   ,"mac verify error"},
-{ERR_REASON(PKCS12_R_MAC_VERIFY_FAILURE) ,"mac verify failure"},
-{ERR_REASON(PKCS12_R_PARSE_ERROR)        ,"parse error"},
-{ERR_REASON(PKCS12_R_PKCS12_ALGOR_CIPHERINIT_ERROR),"pkcs12 algor cipherinit error"},
-{ERR_REASON(PKCS12_R_PKCS12_CIPHERFINAL_ERROR),"pkcs12 cipherfinal error"},
-{ERR_REASON(PKCS12_R_PKCS12_PBE_CRYPT_ERROR),"pkcs12 pbe crypt error"},
-{ERR_REASON(PKCS12_R_UNKNOWN_DIGEST_ALGORITHM),"unknown digest algorithm"},
-{ERR_REASON(PKCS12_R_UNSUPPORTED_PKCS12_MODE),"unsupported pkcs12 mode"},
-{0,NULL}
-	};
-
-#endif
-
-void ERR_load_PKCS12_strings(void)
-	{
-#ifndef OPENSSL_NO_ERR
-
-	if (ERR_func_error_string(PKCS12_str_functs[0].error) == NULL)
-		{
-		ERR_load_strings(0,PKCS12_str_functs);
-		ERR_load_strings(0,PKCS12_str_reasons);
-		}
-#endif
-	}
diff --git a/crypto/openssl/crypto/pkcs12/pkcs12.h b/crypto/openssl/crypto/pkcs12/pkcs12.h
deleted file mode 100644
index a2d7e359a0fd..000000000000
--- a/crypto/openssl/crypto/pkcs12/pkcs12.h
+++ /dev/null
@@ -1,333 +0,0 @@
-/* pkcs12.h */
-/* Written by Dr Stephen N Henson (shenson@bigfoot.com) for the OpenSSL
- * project 1999.
- */
-/* ====================================================================
- * Copyright (c) 1999 The OpenSSL Project.  All rights reserved.
- *
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions
- * are met:
- *
- * 1. Redistributions of source code must retain the above copyright
- *    notice, this list of conditions and the following disclaimer. 
- *
- * 2. Redistributions in binary form must reproduce the above copyright
- *    notice, this list of conditions and the following disclaimer in
- *    the documentation and/or other materials provided with the
- *    distribution.
- *
- * 3. All advertising materials mentioning features or use of this
- *    software must display the following acknowledgment:
- *    "This product includes software developed by the OpenSSL Project
- *    for use in the OpenSSL Toolkit. (http://www.OpenSSL.org/)"
- *
- * 4. The names "OpenSSL Toolkit" and "OpenSSL Project" must not be used to
- *    endorse or promote products derived from this software without
- *    prior written permission. For written permission, please contact
- *    licensing@OpenSSL.org.
- *
- * 5. Products derived from this software may not be called "OpenSSL"
- *    nor may "OpenSSL" appear in their names without prior written
- *    permission of the OpenSSL Project.
- *
- * 6. Redistributions of any form whatsoever must retain the following
- *    acknowledgment:
- *    "This product includes software developed by the OpenSSL Project
- *    for use in the OpenSSL Toolkit (http://www.OpenSSL.org/)"
- *
- * THIS SOFTWARE IS PROVIDED BY THE OpenSSL PROJECT ``AS IS'' AND ANY
- * EXPRESSED OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
- * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR
- * PURPOSE ARE DISCLAIMED.  IN NO EVENT SHALL THE OpenSSL PROJECT OR
- * ITS CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
- * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
- * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
- * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
- * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
- * STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
- * ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED
- * OF THE POSSIBILITY OF SUCH DAMAGE.
- * ====================================================================
- *
- * This product includes cryptographic software written by Eric Young
- * (eay@cryptsoft.com).  This product includes software written by Tim
- * Hudson (tjh@cryptsoft.com).
- *
- */
-
-#ifndef HEADER_PKCS12_H
-#define HEADER_PKCS12_H
-
-#include <openssl/bio.h>
-#include <openssl/x509.h>
-
-#ifdef __cplusplus
-extern "C" {
-#endif
-
-#define PKCS12_KEY_ID	1
-#define PKCS12_IV_ID	2
-#define PKCS12_MAC_ID	3
-
-/* Default iteration count */
-#ifndef PKCS12_DEFAULT_ITER
-#define PKCS12_DEFAULT_ITER	PKCS5_DEFAULT_ITER
-#endif
-
-#define PKCS12_MAC_KEY_LENGTH 20
-
-#define PKCS12_SALT_LEN	8
-
-/* Uncomment out next line for unicode password and names, otherwise ASCII */
-
-/*#define PBE_UNICODE*/
-
-#ifdef PBE_UNICODE
-#define PKCS12_key_gen PKCS12_key_gen_uni
-#define PKCS12_add_friendlyname PKCS12_add_friendlyname_uni
-#else
-#define PKCS12_key_gen PKCS12_key_gen_asc
-#define PKCS12_add_friendlyname PKCS12_add_friendlyname_asc
-#endif
-
-/* MS key usage constants */
-
-#define KEY_EX	0x10
-#define KEY_SIG 0x80
-
-typedef struct {
-X509_SIG *dinfo;
-ASN1_OCTET_STRING *salt;
-ASN1_INTEGER *iter;	/* defaults to 1 */
-} PKCS12_MAC_DATA;
-
-typedef struct {
-ASN1_INTEGER *version;
-PKCS12_MAC_DATA *mac;
-PKCS7 *authsafes;
-} PKCS12;
-
-PREDECLARE_STACK_OF(PKCS12_SAFEBAG)
-
-typedef struct {
-ASN1_OBJECT *type;
-union {
-	struct pkcs12_bag_st *bag; /* secret, crl and certbag */
-	struct pkcs8_priv_key_info_st	*keybag; /* keybag */
-	X509_SIG *shkeybag; /* shrouded key bag */
-	STACK_OF(PKCS12_SAFEBAG) *safes;
-	ASN1_TYPE *other;
-}value;
-STACK_OF(X509_ATTRIBUTE) *attrib;
-} PKCS12_SAFEBAG;
-
-DECLARE_STACK_OF(PKCS12_SAFEBAG)
-DECLARE_ASN1_SET_OF(PKCS12_SAFEBAG)
-DECLARE_PKCS12_STACK_OF(PKCS12_SAFEBAG)
-
-typedef struct pkcs12_bag_st {
-ASN1_OBJECT *type;
-union {
-	ASN1_OCTET_STRING *x509cert;
-	ASN1_OCTET_STRING *x509crl;
-	ASN1_OCTET_STRING *octet;
-	ASN1_IA5STRING *sdsicert;
-	ASN1_TYPE *other; /* Secret or other bag */
-}value;
-} PKCS12_BAGS;
-
-#define PKCS12_ERROR	0
-#define PKCS12_OK	1
-
-/* Compatibility macros */
-
-#define M_PKCS12_x5092certbag PKCS12_x5092certbag
-#define M_PKCS12_x509crl2certbag PKCS12_x509crl2certbag
-
-#define M_PKCS12_certbag2x509 PKCS12_certbag2x509
-#define M_PKCS12_certbag2x509crl PKCS12_certbag2x509crl 
-
-#define M_PKCS12_unpack_p7data PKCS12_unpack_p7data
-#define M_PKCS12_pack_authsafes PKCS12_pack_authsafes
-#define M_PKCS12_unpack_authsafes PKCS12_unpack_authsafes
-#define M_PKCS12_unpack_p7encdata PKCS12_unpack_p7encdata
-
-#define M_PKCS12_decrypt_skey PKCS12_decrypt_skey
-#define M_PKCS8_decrypt PKCS8_decrypt
-
-#define M_PKCS12_bag_type(bg) OBJ_obj2nid((bg)->type)
-#define M_PKCS12_cert_bag_type(bg) OBJ_obj2nid((bg)->value.bag->type)
-#define M_PKCS12_crl_bag_type M_PKCS12_cert_bag_type
-
-#define PKCS12_get_attr(bag, attr_nid) \
-			 PKCS12_get_attr_gen(bag->attrib, attr_nid)
-
-#define PKCS8_get_attr(p8, attr_nid) \
-		PKCS12_get_attr_gen(p8->attributes, attr_nid)
-
-#define PKCS12_mac_present(p12) ((p12)->mac ? 1 : 0)
-
-
-PKCS12_SAFEBAG *PKCS12_x5092certbag(X509 *x509);
-PKCS12_SAFEBAG *PKCS12_x509crl2certbag(X509_CRL *crl);
-X509 *PKCS12_certbag2x509(PKCS12_SAFEBAG *bag);
-X509_CRL *PKCS12_certbag2x509crl(PKCS12_SAFEBAG *bag);
-
-PKCS12_SAFEBAG *PKCS12_item_pack_safebag(void *obj, const ASN1_ITEM *it, int nid1,
-	     int nid2);
-PKCS12_SAFEBAG *PKCS12_MAKE_KEYBAG(PKCS8_PRIV_KEY_INFO *p8);
-PKCS8_PRIV_KEY_INFO *PKCS8_decrypt(X509_SIG *p8, const char *pass, int passlen);
-PKCS8_PRIV_KEY_INFO *PKCS12_decrypt_skey(PKCS12_SAFEBAG *bag, const char *pass,
-								int passlen);
-X509_SIG *PKCS8_encrypt(int pbe_nid, const EVP_CIPHER *cipher, 
-			const char *pass, int passlen,
-			unsigned char *salt, int saltlen, int iter,
-			PKCS8_PRIV_KEY_INFO *p8);
-PKCS12_SAFEBAG *PKCS12_MAKE_SHKEYBAG(int pbe_nid, const char *pass,
-				     int passlen, unsigned char *salt,
-				     int saltlen, int iter,
-				     PKCS8_PRIV_KEY_INFO *p8);
-PKCS7 *PKCS12_pack_p7data(STACK_OF(PKCS12_SAFEBAG) *sk);
-STACK_OF(PKCS12_SAFEBAG) *PKCS12_unpack_p7data(PKCS7 *p7);
-PKCS7 *PKCS12_pack_p7encdata(int pbe_nid, const char *pass, int passlen,
-			     unsigned char *salt, int saltlen, int iter,
-			     STACK_OF(PKCS12_SAFEBAG) *bags);
-STACK_OF(PKCS12_SAFEBAG) *PKCS12_unpack_p7encdata(PKCS7 *p7, const char *pass, int passlen);
-
-int PKCS12_pack_authsafes(PKCS12 *p12, STACK_OF(PKCS7) *safes);
-STACK_OF(PKCS7) *PKCS12_unpack_authsafes(PKCS12 *p12);
-
-int PKCS12_add_localkeyid(PKCS12_SAFEBAG *bag, unsigned char *name, int namelen);
-int PKCS12_add_friendlyname_asc(PKCS12_SAFEBAG *bag, const char *name,
-				int namelen);
-int PKCS12_add_CSPName_asc(PKCS12_SAFEBAG *bag, const char *name,
-				int namelen);
-int PKCS12_add_friendlyname_uni(PKCS12_SAFEBAG *bag, const unsigned char *name,
-				int namelen);
-int PKCS8_add_keyusage(PKCS8_PRIV_KEY_INFO *p8, int usage);
-ASN1_TYPE *PKCS12_get_attr_gen(STACK_OF(X509_ATTRIBUTE) *attrs, int attr_nid);
-char *PKCS12_get_friendlyname(PKCS12_SAFEBAG *bag);
-unsigned char *PKCS12_pbe_crypt(X509_ALGOR *algor, const char *pass,
-				int passlen, unsigned char *in, int inlen,
-				unsigned char **data, int *datalen, int en_de);
-void * PKCS12_item_decrypt_d2i(X509_ALGOR *algor, const ASN1_ITEM *it,
-	     const char *pass, int passlen, ASN1_OCTET_STRING *oct, int zbuf);
-ASN1_OCTET_STRING *PKCS12_item_i2d_encrypt(X509_ALGOR *algor, const ASN1_ITEM *it,
-				       const char *pass, int passlen,
-				       void *obj, int zbuf);
-PKCS12 *PKCS12_init(int mode);
-int PKCS12_key_gen_asc(const char *pass, int passlen, unsigned char *salt,
-		       int saltlen, int id, int iter, int n,
-		       unsigned char *out, const EVP_MD *md_type);
-int PKCS12_key_gen_uni(unsigned char *pass, int passlen, unsigned char *salt, int saltlen, int id, int iter, int n, unsigned char *out, const EVP_MD *md_type);
-int PKCS12_PBE_keyivgen(EVP_CIPHER_CTX *ctx, const char *pass, int passlen,
-			 ASN1_TYPE *param, const EVP_CIPHER *cipher, const EVP_MD *md_type,
-			 int en_de);
-int PKCS12_gen_mac(PKCS12 *p12, const char *pass, int passlen,
-			 unsigned char *mac, unsigned int *maclen);
-int PKCS12_verify_mac(PKCS12 *p12, const char *pass, int passlen);
-int PKCS12_set_mac(PKCS12 *p12, const char *pass, int passlen,
-		   unsigned char *salt, int saltlen, int iter,
-		   const EVP_MD *md_type);
-int PKCS12_setup_mac(PKCS12 *p12, int iter, unsigned char *salt,
-					 int saltlen, const EVP_MD *md_type);
-unsigned char *asc2uni(const char *asc, int asclen, unsigned char **uni, int *unilen);
-char *uni2asc(unsigned char *uni, int unilen);
-
-DECLARE_ASN1_FUNCTIONS(PKCS12)
-DECLARE_ASN1_FUNCTIONS(PKCS12_MAC_DATA)
-DECLARE_ASN1_FUNCTIONS(PKCS12_SAFEBAG)
-DECLARE_ASN1_FUNCTIONS(PKCS12_BAGS)
-
-DECLARE_ASN1_ITEM(PKCS12_SAFEBAGS)
-DECLARE_ASN1_ITEM(PKCS12_AUTHSAFES)
-
-void PKCS12_PBE_add(void);
-int PKCS12_parse(PKCS12 *p12, const char *pass, EVP_PKEY **pkey, X509 **cert,
-		 STACK_OF(X509) **ca);
-PKCS12 *PKCS12_create(char *pass, char *name, EVP_PKEY *pkey, X509 *cert,
-			 STACK_OF(X509) *ca, int nid_key, int nid_cert, int iter,
-						 int mac_iter, int keytype);
-
-PKCS12_SAFEBAG *PKCS12_add_cert(STACK_OF(PKCS12_SAFEBAG) **pbags, X509 *cert);
-PKCS12_SAFEBAG *PKCS12_add_key(STACK_OF(PKCS12_SAFEBAG) **pbags, EVP_PKEY *key,
-						int key_usage, int iter,
-						int key_nid, char *pass);
-int PKCS12_add_safe(STACK_OF(PKCS7) **psafes, STACK_OF(PKCS12_SAFEBAG) *bags,
-					int safe_nid, int iter, char *pass);
-PKCS12 *PKCS12_add_safes(STACK_OF(PKCS7) *safes, int p7_nid);
-
-int i2d_PKCS12_bio(BIO *bp, PKCS12 *p12);
-int i2d_PKCS12_fp(FILE *fp, PKCS12 *p12);
-PKCS12 *d2i_PKCS12_bio(BIO *bp, PKCS12 **p12);
-PKCS12 *d2i_PKCS12_fp(FILE *fp, PKCS12 **p12);
-int PKCS12_newpass(PKCS12 *p12, char *oldpass, char *newpass);
-
-/* BEGIN ERROR CODES */
-/* The following lines are auto generated by the script mkerr.pl. Any changes
- * made after this point may be overwritten when the script is next run.
- */
-void ERR_load_PKCS12_strings(void);
-
-/* Error codes for the PKCS12 functions. */
-
-/* Function codes. */
-#define PKCS12_F_PARSE_BAG				 129
-#define PKCS12_F_PARSE_BAGS				 103
-#define PKCS12_F_PKCS12_ADD_FRIENDLYNAME		 100
-#define PKCS12_F_PKCS12_ADD_FRIENDLYNAME_ASC		 127
-#define PKCS12_F_PKCS12_ADD_FRIENDLYNAME_UNI		 102
-#define PKCS12_F_PKCS12_ADD_LOCALKEYID			 104
-#define PKCS12_F_PKCS12_CREATE				 105
-#define PKCS12_F_PKCS12_GEN_MAC				 107
-#define PKCS12_F_PKCS12_INIT				 109
-#define PKCS12_F_PKCS12_ITEM_DECRYPT_D2I		 106
-#define PKCS12_F_PKCS12_ITEM_I2D_ENCRYPT		 108
-#define PKCS12_F_PKCS12_ITEM_PACK_SAFEBAG		 117
-#define PKCS12_F_PKCS12_KEY_GEN_ASC			 110
-#define PKCS12_F_PKCS12_KEY_GEN_UNI			 111
-#define PKCS12_F_PKCS12_MAKE_KEYBAG			 112
-#define PKCS12_F_PKCS12_MAKE_SHKEYBAG			 113
-#define PKCS12_F_PKCS12_NEWPASS				 128
-#define PKCS12_F_PKCS12_PACK_P7DATA			 114
-#define PKCS12_F_PKCS12_PACK_P7ENCDATA			 115
-#define PKCS12_F_PKCS12_PARSE				 118
-#define PKCS12_F_PKCS12_PBE_CRYPT			 119
-#define PKCS12_F_PKCS12_PBE_KEYIVGEN			 120
-#define PKCS12_F_PKCS12_SETUP_MAC			 122
-#define PKCS12_F_PKCS12_SET_MAC				 123
-#define PKCS12_F_PKCS12_UNPACK_AUTHSAFES		 130
-#define PKCS12_F_PKCS12_UNPACK_P7DATA			 131
-#define PKCS12_F_PKCS12_VERIFY_MAC			 126
-#define PKCS12_F_PKCS8_ADD_KEYUSAGE			 124
-#define PKCS12_F_PKCS8_ENCRYPT				 125
-
-/* Reason codes. */
-#define PKCS12_R_CANT_PACK_STRUCTURE			 100
-#define PKCS12_R_CONTENT_TYPE_NOT_DATA			 121
-#define PKCS12_R_DECODE_ERROR				 101
-#define PKCS12_R_ENCODE_ERROR				 102
-#define PKCS12_R_ENCRYPT_ERROR				 103
-#define PKCS12_R_ERROR_SETTING_ENCRYPTED_DATA_TYPE	 120
-#define PKCS12_R_INVALID_NULL_ARGUMENT			 104
-#define PKCS12_R_INVALID_NULL_PKCS12_POINTER		 105
-#define PKCS12_R_IV_GEN_ERROR				 106
-#define PKCS12_R_KEY_GEN_ERROR				 107
-#define PKCS12_R_MAC_ABSENT				 108
-#define PKCS12_R_MAC_GENERATION_ERROR			 109
-#define PKCS12_R_MAC_SETUP_ERROR			 110
-#define PKCS12_R_MAC_STRING_SET_ERROR			 111
-#define PKCS12_R_MAC_VERIFY_ERROR			 112
-#define PKCS12_R_MAC_VERIFY_FAILURE			 113
-#define PKCS12_R_PARSE_ERROR				 114
-#define PKCS12_R_PKCS12_ALGOR_CIPHERINIT_ERROR		 115
-#define PKCS12_R_PKCS12_CIPHERFINAL_ERROR		 116
-#define PKCS12_R_PKCS12_PBE_CRYPT_ERROR			 117
-#define PKCS12_R_UNKNOWN_DIGEST_ALGORITHM		 118
-#define PKCS12_R_UNSUPPORTED_PKCS12_MODE		 119
-
-#ifdef  __cplusplus
-}
-#endif
-#endif
diff --git a/crypto/openssl/crypto/pkcs7/Makefile b/crypto/openssl/crypto/pkcs7/Makefile
deleted file mode 100644
index 3f7e88b40faa..000000000000
--- a/crypto/openssl/crypto/pkcs7/Makefile
+++ /dev/null
@@ -1,187 +0,0 @@
-#
-# OpenSSL/crypto/pkcs7/Makefile
-#
-
-DIR=	pkcs7
-TOP=	../..
-CC=	cc
-INCLUDES= -I.. -I$(TOP) -I../../include
-CFLAG=-g
-MAKEFILE=	Makefile
-AR=		ar r
-
-PEX_LIBS=
-EX_LIBS=
- 
-CFLAGS= $(INCLUDES) $(CFLAG)
-
-GENERAL=Makefile README
-TEST=
-APPS=
-
-LIB=$(TOP)/libcrypto.a
-LIBSRC=	pk7_asn1.c pk7_lib.c pkcs7err.c pk7_doit.c pk7_smime.c pk7_attr.c \
-	pk7_mime.c
-LIBOBJ= pk7_asn1.o pk7_lib.o pkcs7err.o pk7_doit.o pk7_smime.o pk7_attr.o \
-	pk7_mime.o
-
-SRC= $(LIBSRC)
-
-EXHEADER=  pkcs7.h
-HEADER=	$(EXHEADER)
-
-ALL=    $(GENERAL) $(SRC) $(HEADER)
-
-top:
-	(cd ../..; $(MAKE) DIRS=crypto SDIRS=$(DIR) sub_all)
-
-test:
-
-all:	lib
-
-testapps: enc dec sign verify
-
-enc: enc.o lib
-	$(CC) $(CFLAGS) -o enc enc.o $(PEX_LIBS) $(LIB) $(EX_LIBS)
-
-dec: dec.o lib
-	$(CC) $(CFLAGS) -o dec dec.o $(PEX_LIBS) $(LIB) $(EX_LIBS)
-
-sign: sign.o lib
-	$(CC) $(CFLAGS) -o sign sign.o $(PEX_LIBS) $(LIB) $(EX_LIBS)
-
-verify: verify.o example.o lib
-	$(CC) $(CFLAGS) -o verify verify.o $(PEX_LIBS) example.o $(LIB) $(EX_LIBS)
-
-lib:	$(LIBOBJ)
-	$(AR) $(LIB) $(LIBOBJ)
-	$(RANLIB) $(LIB) || echo Never mind.
-	@touch lib
-
-files:
-	$(PERL) $(TOP)/util/files.pl Makefile >> $(TOP)/MINFO
-
-links:
-	@$(PERL) $(TOP)/util/mklink.pl ../../include/openssl $(EXHEADER)
-	@$(PERL) $(TOP)/util/mklink.pl ../../test $(TEST)
-	@$(PERL) $(TOP)/util/mklink.pl ../../apps $(APPS)
-
-install:
-	@[ -n "$(INSTALLTOP)" ] # should be set by top Makefile...
-	@headerlist="$(EXHEADER)"; for i in $$headerlist ; \
-	do  \
-	(cp $$i $(INSTALL_PREFIX)$(INSTALLTOP)/include/openssl/$$i; \
-	chmod 644 $(INSTALL_PREFIX)$(INSTALLTOP)/include/openssl/$$i ); \
-	done;
-
-tags:
-	ctags $(SRC)
-
-tests:
-
-lint:
-	lint -DLINT $(INCLUDES) $(SRC)>fluff
-
-depend:
-	@[ -n "$(MAKEDEPEND)" ] # should be set by upper Makefile...
-	$(MAKEDEPEND) -- $(CFLAG) $(INCLUDES) $(DEPFLAG) -- $(PROGS) $(LIBSRC)
-
-dclean:
-	$(PERL) -pe 'if (/^# DO NOT DELETE THIS LINE/) {print; exit(0);}' $(MAKEFILE) >Makefile.new
-	mv -f Makefile.new $(MAKEFILE)
-
-clean:
-	rm -f *.o *.obj lib tags core .pure .nfs* *.old *.bak fluff enc dec sign verify
-
-# DO NOT DELETE THIS LINE -- make depend depends on it.
-
-pk7_asn1.o: ../../e_os.h ../../include/openssl/asn1.h
-pk7_asn1.o: ../../include/openssl/asn1t.h ../../include/openssl/bio.h
-pk7_asn1.o: ../../include/openssl/buffer.h ../../include/openssl/crypto.h
-pk7_asn1.o: ../../include/openssl/e_os2.h ../../include/openssl/ec.h
-pk7_asn1.o: ../../include/openssl/ecdh.h ../../include/openssl/ecdsa.h
-pk7_asn1.o: ../../include/openssl/err.h ../../include/openssl/evp.h
-pk7_asn1.o: ../../include/openssl/lhash.h ../../include/openssl/obj_mac.h
-pk7_asn1.o: ../../include/openssl/objects.h ../../include/openssl/opensslconf.h
-pk7_asn1.o: ../../include/openssl/opensslv.h ../../include/openssl/ossl_typ.h
-pk7_asn1.o: ../../include/openssl/pkcs7.h ../../include/openssl/safestack.h
-pk7_asn1.o: ../../include/openssl/sha.h ../../include/openssl/stack.h
-pk7_asn1.o: ../../include/openssl/symhacks.h ../../include/openssl/x509.h
-pk7_asn1.o: ../../include/openssl/x509_vfy.h ../cryptlib.h pk7_asn1.c
-pk7_attr.o: ../../include/openssl/asn1.h ../../include/openssl/bio.h
-pk7_attr.o: ../../include/openssl/buffer.h ../../include/openssl/crypto.h
-pk7_attr.o: ../../include/openssl/e_os2.h ../../include/openssl/ec.h
-pk7_attr.o: ../../include/openssl/ecdh.h ../../include/openssl/ecdsa.h
-pk7_attr.o: ../../include/openssl/err.h ../../include/openssl/evp.h
-pk7_attr.o: ../../include/openssl/lhash.h ../../include/openssl/obj_mac.h
-pk7_attr.o: ../../include/openssl/objects.h ../../include/openssl/opensslconf.h
-pk7_attr.o: ../../include/openssl/opensslv.h ../../include/openssl/ossl_typ.h
-pk7_attr.o: ../../include/openssl/pem.h ../../include/openssl/pem2.h
-pk7_attr.o: ../../include/openssl/pkcs7.h ../../include/openssl/safestack.h
-pk7_attr.o: ../../include/openssl/sha.h ../../include/openssl/stack.h
-pk7_attr.o: ../../include/openssl/symhacks.h ../../include/openssl/x509.h
-pk7_attr.o: ../../include/openssl/x509_vfy.h pk7_attr.c
-pk7_doit.o: ../../e_os.h ../../include/openssl/asn1.h
-pk7_doit.o: ../../include/openssl/bio.h ../../include/openssl/buffer.h
-pk7_doit.o: ../../include/openssl/conf.h ../../include/openssl/crypto.h
-pk7_doit.o: ../../include/openssl/e_os2.h ../../include/openssl/ec.h
-pk7_doit.o: ../../include/openssl/ecdh.h ../../include/openssl/ecdsa.h
-pk7_doit.o: ../../include/openssl/err.h ../../include/openssl/evp.h
-pk7_doit.o: ../../include/openssl/lhash.h ../../include/openssl/obj_mac.h
-pk7_doit.o: ../../include/openssl/objects.h ../../include/openssl/opensslconf.h
-pk7_doit.o: ../../include/openssl/opensslv.h ../../include/openssl/ossl_typ.h
-pk7_doit.o: ../../include/openssl/pkcs7.h ../../include/openssl/rand.h
-pk7_doit.o: ../../include/openssl/safestack.h ../../include/openssl/sha.h
-pk7_doit.o: ../../include/openssl/stack.h ../../include/openssl/symhacks.h
-pk7_doit.o: ../../include/openssl/x509.h ../../include/openssl/x509_vfy.h
-pk7_doit.o: ../../include/openssl/x509v3.h ../cryptlib.h pk7_doit.c
-pk7_lib.o: ../../e_os.h ../../include/openssl/asn1.h
-pk7_lib.o: ../../include/openssl/bio.h ../../include/openssl/buffer.h
-pk7_lib.o: ../../include/openssl/crypto.h ../../include/openssl/e_os2.h
-pk7_lib.o: ../../include/openssl/ec.h ../../include/openssl/ecdh.h
-pk7_lib.o: ../../include/openssl/ecdsa.h ../../include/openssl/err.h
-pk7_lib.o: ../../include/openssl/evp.h ../../include/openssl/lhash.h
-pk7_lib.o: ../../include/openssl/obj_mac.h ../../include/openssl/objects.h
-pk7_lib.o: ../../include/openssl/opensslconf.h ../../include/openssl/opensslv.h
-pk7_lib.o: ../../include/openssl/ossl_typ.h ../../include/openssl/pkcs7.h
-pk7_lib.o: ../../include/openssl/safestack.h ../../include/openssl/sha.h
-pk7_lib.o: ../../include/openssl/stack.h ../../include/openssl/symhacks.h
-pk7_lib.o: ../../include/openssl/x509.h ../../include/openssl/x509_vfy.h
-pk7_lib.o: ../cryptlib.h pk7_lib.c
-pk7_mime.o: ../../e_os.h ../../include/openssl/asn1.h
-pk7_mime.o: ../../include/openssl/bio.h ../../include/openssl/buffer.h
-pk7_mime.o: ../../include/openssl/crypto.h ../../include/openssl/e_os2.h
-pk7_mime.o: ../../include/openssl/ec.h ../../include/openssl/ecdh.h
-pk7_mime.o: ../../include/openssl/ecdsa.h ../../include/openssl/err.h
-pk7_mime.o: ../../include/openssl/evp.h ../../include/openssl/lhash.h
-pk7_mime.o: ../../include/openssl/obj_mac.h ../../include/openssl/objects.h
-pk7_mime.o: ../../include/openssl/opensslconf.h
-pk7_mime.o: ../../include/openssl/opensslv.h ../../include/openssl/ossl_typ.h
-pk7_mime.o: ../../include/openssl/pkcs7.h ../../include/openssl/rand.h
-pk7_mime.o: ../../include/openssl/safestack.h ../../include/openssl/sha.h
-pk7_mime.o: ../../include/openssl/stack.h ../../include/openssl/symhacks.h
-pk7_mime.o: ../../include/openssl/x509.h ../../include/openssl/x509_vfy.h
-pk7_mime.o: ../cryptlib.h pk7_mime.c
-pk7_smime.o: ../../e_os.h ../../include/openssl/asn1.h
-pk7_smime.o: ../../include/openssl/bio.h ../../include/openssl/buffer.h
-pk7_smime.o: ../../include/openssl/conf.h ../../include/openssl/crypto.h
-pk7_smime.o: ../../include/openssl/e_os2.h ../../include/openssl/ec.h
-pk7_smime.o: ../../include/openssl/ecdh.h ../../include/openssl/ecdsa.h
-pk7_smime.o: ../../include/openssl/err.h ../../include/openssl/evp.h
-pk7_smime.o: ../../include/openssl/lhash.h ../../include/openssl/obj_mac.h
-pk7_smime.o: ../../include/openssl/objects.h
-pk7_smime.o: ../../include/openssl/opensslconf.h
-pk7_smime.o: ../../include/openssl/opensslv.h ../../include/openssl/ossl_typ.h
-pk7_smime.o: ../../include/openssl/pkcs7.h ../../include/openssl/safestack.h
-pk7_smime.o: ../../include/openssl/sha.h ../../include/openssl/stack.h
-pk7_smime.o: ../../include/openssl/symhacks.h ../../include/openssl/x509.h
-pk7_smime.o: ../../include/openssl/x509_vfy.h ../../include/openssl/x509v3.h
-pk7_smime.o: ../cryptlib.h pk7_smime.c
-pkcs7err.o: ../../include/openssl/asn1.h ../../include/openssl/bio.h
-pkcs7err.o: ../../include/openssl/crypto.h ../../include/openssl/e_os2.h
-pkcs7err.o: ../../include/openssl/err.h ../../include/openssl/lhash.h
-pkcs7err.o: ../../include/openssl/opensslconf.h
-pkcs7err.o: ../../include/openssl/opensslv.h ../../include/openssl/ossl_typ.h
-pkcs7err.o: ../../include/openssl/pkcs7.h ../../include/openssl/safestack.h
-pkcs7err.o: ../../include/openssl/stack.h ../../include/openssl/symhacks.h
-pkcs7err.o: pkcs7err.c
diff --git a/crypto/openssl/crypto/pkcs7/bio_ber.c b/crypto/openssl/crypto/pkcs7/bio_ber.c
deleted file mode 100644
index 31973fcd1fc5..000000000000
--- a/crypto/openssl/crypto/pkcs7/bio_ber.c
+++ /dev/null
@@ -1,466 +0,0 @@
-/* crypto/evp/bio_ber.c */
-/* Copyright (C) 1995-1998 Eric Young (eay@cryptsoft.com)
- * All rights reserved.
- *
- * This package is an SSL implementation written
- * by Eric Young (eay@cryptsoft.com).
- * The implementation was written so as to conform with Netscapes SSL.
- * 
- * This library is free for commercial and non-commercial use as long as
- * the following conditions are aheared to.  The following conditions
- * apply to all code found in this distribution, be it the RC4, RSA,
- * lhash, DES, etc., code; not just the SSL code.  The SSL documentation
- * included with this distribution is covered by the same copyright terms
- * except that the holder is Tim Hudson (tjh@cryptsoft.com).
- * 
- * Copyright remains Eric Young's, and as such any Copyright notices in
- * the code are not to be removed.
- * If this package is used in a product, Eric Young should be given attribution
- * as the author of the parts of the library used.
- * This can be in the form of a textual message at program startup or
- * in documentation (online or textual) provided with the package.
- * 
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions
- * are met:
- * 1. Redistributions of source code must retain the copyright
- *    notice, this list of conditions and the following disclaimer.
- * 2. Redistributions in binary form must reproduce the above copyright
- *    notice, this list of conditions and the following disclaimer in the
- *    documentation and/or other materials provided with the distribution.
- * 3. All advertising materials mentioning features or use of this software
- *    must display the following acknowledgement:
- *    "This product includes cryptographic software written by
- *     Eric Young (eay@cryptsoft.com)"
- *    The word 'cryptographic' can be left out if the rouines from the library
- *    being used are not cryptographic related :-).
- * 4. If you include any Windows specific code (or a derivative thereof) from 
- *    the apps directory (application code) you must include an acknowledgement:
- *    "This product includes software written by Tim Hudson (tjh@cryptsoft.com)"
- * 
- * THIS SOFTWARE IS PROVIDED BY ERIC YOUNG ``AS IS'' AND
- * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
- * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
- * ARE DISCLAIMED.  IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE
- * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
- * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
- * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
- * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
- * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
- * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
- * SUCH DAMAGE.
- * 
- * The licence and distribution terms for any publically available version or
- * derivative of this code cannot be changed.  i.e. this code cannot simply be
- * copied and put under another distribution licence
- * [including the GNU Public Licence.]
- */
-
-#include <stdio.h>
-#include <errno.h>
-#include "cryptlib.h"
-#include <openssl/buffer.h>
-#include <openssl/evp.h>
-
-static int ber_write(BIO *h,char *buf,int num);
-static int ber_read(BIO *h,char *buf,int size);
-/*static int ber_puts(BIO *h,char *str); */
-/*static int ber_gets(BIO *h,char *str,int size); */
-static long ber_ctrl(BIO *h,int cmd,long arg1,char *arg2);
-static int ber_new(BIO *h);
-static int ber_free(BIO *data);
-static long ber_callback_ctrl(BIO *h,int cmd,void *(*fp)());
-#define BER_BUF_SIZE	(32)
-
-/* This is used to hold the state of the BER objects being read. */
-typedef struct ber_struct
-	{
-	int tag;
-	int class;
-	long length;
-	int inf;
-	int num_left;
-	int depth;
-	} BER_CTX;
-
-typedef struct bio_ber_struct
-	{
-	int tag;
-	int class;
-	long length;
-	int inf;
-
-	/* most of the following are used when doing non-blocking IO */
-	/* reading */
-	long num_left;	/* number of bytes still to read/write in block */
-	int depth;	/* used with indefinite encoding. */
-	int finished;	/* No more read data */
-
-	/* writting */ 
-	char *w_addr;
-	int w_offset;
-	int w_left;
-
-	int buf_len;
-	int buf_off;
-	unsigned char buf[BER_BUF_SIZE];
-	} BIO_BER_CTX;
-
-static BIO_METHOD methods_ber=
-	{
-	BIO_TYPE_CIPHER,"cipher",
-	ber_write,
-	ber_read,
-	NULL, /* ber_puts, */
-	NULL, /* ber_gets, */
-	ber_ctrl,
-	ber_new,
-	ber_free,
-	ber_callback_ctrl,
-	};
-
-BIO_METHOD *BIO_f_ber(void)
-	{
-	return(&methods_ber);
-	}
-
-static int ber_new(BIO *bi)
-	{
-	BIO_BER_CTX *ctx;
-
-	ctx=(BIO_BER_CTX *)OPENSSL_malloc(sizeof(BIO_BER_CTX));
-	if (ctx == NULL) return(0);
-
-	memset((char *)ctx,0,sizeof(BIO_BER_CTX));
-
-	bi->init=0;
-	bi->ptr=(char *)ctx;
-	bi->flags=0;
-	return(1);
-	}
-
-static int ber_free(BIO *a)
-	{
-	BIO_BER_CTX *b;
-
-	if (a == NULL) return(0);
-	b=(BIO_BER_CTX *)a->ptr;
-	OPENSSL_cleanse(a->ptr,sizeof(BIO_BER_CTX));
-	OPENSSL_free(a->ptr);
-	a->ptr=NULL;
-	a->init=0;
-	a->flags=0;
-	return(1);
-	}
-
-int bio_ber_get_header(BIO *bio, BIO_BER_CTX *ctx)
-	{
-	char buf[64];
-	int i,j,n;
-	int ret;
-	unsigned char *p;
-	unsigned long length
-	int tag;
-	int class;
-	long max;
-
-	BIO_clear_retry_flags(b);
-
-	/* Pack the buffer down if there is a hole at the front */
-	if (ctx->buf_off != 0)
-		{
-		p=ctx->buf;
-		j=ctx->buf_off;
-		n=ctx->buf_len-j;
-		for (i=0; i<n; i++)
-			{
-			p[0]=p[j];
-			p++;
-			}
-		ctx->buf_len-j;
-		ctx->buf_off=0;
-		}
-
-	/* If there is more room, read some more data */
-	i=BER_BUF_SIZE-ctx->buf_len;
-	if (i)
-		{
-		i=BIO_read(bio->next_bio,&(ctx->buf[ctx->buf_len]),i);
-		if (i <= 0)
-			{
-			BIO_copy_next_retry(b);
-			return(i);
-			}
-		else
-			ctx->buf_len+=i;
-		}
-
-	max=ctx->buf_len;
-	p=ctx->buf;
-	ret=ASN1_get_object(&p,&length,&tag,&class,max);
-
-	if (ret & 0x80)
-		{
-		if ((ctx->buf_len < BER_BUF_SIZE) &&
-			(ERR_GET_REASON(ERR_peek_error()) == ASN1_R_TOO_LONG))
-			{
-			ERR_clear_error(); /* clear the error */
-			BIO_set_retry_read(b);
-			}
-		return(-1);
-		}
-
-	/* We have no error, we have a header, so make use of it */
-
-	if ((ctx->tag  >= 0) && (ctx->tag != tag))
-		{
-		BIOerr(BIO_F_BIO_BER_GET_HEADER,BIO_R_TAG_MISMATCH);
-		sprintf(buf,"tag=%d, got %d",ctx->tag,tag);
-		ERR_add_error_data(1,buf);
-		return(-1);
-		}
-	if (ret & 0x01)
-	if (ret & V_ASN1_CONSTRUCTED)
-	}
-	
-static int ber_read(BIO *b, char *out, int outl)
-	{
-	int ret=0,i,n;
-	BIO_BER_CTX *ctx;
-
-	BIO_clear_retry_flags(b);
-
-	if (out == NULL) return(0);
-	ctx=(BIO_BER_CTX *)b->ptr;
-
-	if ((ctx == NULL) || (b->next_bio == NULL)) return(0);
-
-	if (ctx->finished) return(0);
-
-again:
-	/* First see if we are half way through reading a block */
-	if (ctx->num_left > 0)
-		{
-		if (ctx->num_left < outl)
-			n=ctx->num_left;
-		else
-			n=outl;
-		i=BIO_read(b->next_bio,out,n);
-		if (i <= 0)
-			{
-			BIO_copy_next_retry(b);
-			return(i);
-			}
-		ctx->num_left-=i;
-		outl-=i;
-		ret+=i;
-		if (ctx->num_left <= 0)
-			{
-			ctx->depth--;
-			if (ctx->depth <= 0)
-				ctx->finished=1;
-			}
-		if (outl <= 0)
-			return(ret);
-		else
-			goto again;
-		}
-	else	/* we need to read another BER header */
-		{
-		}
-	}
-
-static int ber_write(BIO *b, char *in, int inl)
-	{
-	int ret=0,n,i;
-	BIO_ENC_CTX *ctx;
-
-	ctx=(BIO_ENC_CTX *)b->ptr;
-	ret=inl;
-
-	BIO_clear_retry_flags(b);
-	n=ctx->buf_len-ctx->buf_off;
-	while (n > 0)
-		{
-		i=BIO_write(b->next_bio,&(ctx->buf[ctx->buf_off]),n);
-		if (i <= 0)
-			{
-			BIO_copy_next_retry(b);
-			return(i);
-			}
-		ctx->buf_off+=i;
-		n-=i;
-		}
-	/* at this point all pending data has been written */
-
-	if ((in == NULL) || (inl <= 0)) return(0);
-
-	ctx->buf_off=0;
-	while (inl > 0)
-		{
-		n=(inl > ENC_BLOCK_SIZE)?ENC_BLOCK_SIZE:inl;
-		EVP_CipherUpdate(&(ctx->cipher),
-			(unsigned char *)ctx->buf,&ctx->buf_len,
-			(unsigned char *)in,n);
-		inl-=n;
-		in+=n;
-
-		ctx->buf_off=0;
-		n=ctx->buf_len;
-		while (n > 0)
-			{
-			i=BIO_write(b->next_bio,&(ctx->buf[ctx->buf_off]),n);
-			if (i <= 0)
-				{
-				BIO_copy_next_retry(b);
-				return(i);
-				}
-			n-=i;
-			ctx->buf_off+=i;
-			}
-		ctx->buf_len=0;
-		ctx->buf_off=0;
-		}
-	BIO_copy_next_retry(b);
-	return(ret);
-	}
-
-static long ber_ctrl(BIO *b, int cmd, long num, char *ptr)
-	{
-	BIO *dbio;
-	BIO_ENC_CTX *ctx,*dctx;
-	long ret=1;
-	int i;
-
-	ctx=(BIO_ENC_CTX *)b->ptr;
-
-	switch (cmd)
-		{
-	case BIO_CTRL_RESET:
-		ctx->ok=1;
-		ctx->finished=0;
-		EVP_CipherInit_ex(&(ctx->cipher),NULL,NULL,NULL,NULL,
-			ctx->cipher.berrypt);
-		ret=BIO_ctrl(b->next_bio,cmd,num,ptr);
-		break;
-	case BIO_CTRL_EOF:	/* More to read */
-		if (ctx->cont <= 0)
-			ret=1;
-		else
-			ret=BIO_ctrl(b->next_bio,cmd,num,ptr);
-		break;
-	case BIO_CTRL_WPENDING:
-		ret=ctx->buf_len-ctx->buf_off;
-		if (ret <= 0)
-			ret=BIO_ctrl(b->next_bio,cmd,num,ptr);
-		break;
-	case BIO_CTRL_PENDING: /* More to read in buffer */
-		ret=ctx->buf_len-ctx->buf_off;
-		if (ret <= 0)
-			ret=BIO_ctrl(b->next_bio,cmd,num,ptr);
-		break;
-	case BIO_CTRL_FLUSH:
-		/* do a final write */
-again:
-		while (ctx->buf_len != ctx->buf_off)
-			{
-			i=ber_write(b,NULL,0);
-			if (i < 0)
-				{
-				ret=i;
-				break;
-				}
-			}
-
-		if (!ctx->finished)
-			{
-			ctx->finished=1;
-			ctx->buf_off=0;
-			ret=EVP_CipherFinal_ex(&(ctx->cipher),
-				(unsigned char *)ctx->buf,
-				&(ctx->buf_len));
-			ctx->ok=(int)ret;
-			if (ret <= 0) break;
-
-			/* push out the bytes */
-			goto again;
-			}
-		
-		/* Finally flush the underlying BIO */
-		ret=BIO_ctrl(b->next_bio,cmd,num,ptr);
-		break;
-	case BIO_C_GET_CIPHER_STATUS:
-		ret=(long)ctx->ok;
-		break;
-	case BIO_C_DO_STATE_MACHINE:
-		BIO_clear_retry_flags(b);
-		ret=BIO_ctrl(b->next_bio,cmd,num,ptr);
-		BIO_copy_next_retry(b);
-		break;
-
-	case BIO_CTRL_DUP:
-		dbio=(BIO *)ptr;
-		dctx=(BIO_ENC_CTX *)dbio->ptr;
-		memcpy(&(dctx->cipher),&(ctx->cipher),sizeof(ctx->cipher));
-		dbio->init=1;
-		break;
-	default:
-		ret=BIO_ctrl(b->next_bio,cmd,num,ptr);
-		break;
-		}
-	return(ret);
-	}
-
-static long ber_callback_ctrl(BIO *b, int cmd, void *(*fp)())
-	{
-	long ret=1;
-
-	if (b->next_bio == NULL) return(0);
-	switch (cmd)
-		{
-	default:
-		ret=BIO_callback_ctrl(b->next_bio,cmd,fp);
-		break;
-		}
-	return(ret);
-	}
-
-/*
-void BIO_set_cipher_ctx(b,c)
-BIO *b;
-EVP_CIPHER_ctx *c;
-	{
-	if (b == NULL) return;
-
-	if ((b->callback != NULL) &&
-		(b->callback(b,BIO_CB_CTRL,(char *)c,BIO_CTRL_SET,e,0L) <= 0))
-		return;
-
-	b->init=1;
-	ctx=(BIO_ENC_CTX *)b->ptr;
-	memcpy(ctx->cipher,c,sizeof(EVP_CIPHER_CTX));
-	
-	if (b->callback != NULL)
-		b->callback(b,BIO_CB_CTRL,(char *)c,BIO_CTRL_SET,e,1L);
-	}
-*/
-
-void BIO_set_cipher(BIO *b, EVP_CIPHER *c, unsigned char *k, unsigned char *i,
-	     int e)
-	{
-	BIO_ENC_CTX *ctx;
-
-	if (b == NULL) return;
-
-	if ((b->callback != NULL) &&
-		(b->callback(b,BIO_CB_CTRL,(char *)c,BIO_CTRL_SET,e,0L) <= 0))
-		return;
-
-	b->init=1;
-	ctx=(BIO_ENC_CTX *)b->ptr;
-	EVP_CipherInit_ex(&(ctx->cipher),c,NULL,k,i,e);
-	
-	if (b->callback != NULL)
-		b->callback(b,BIO_CB_CTRL,(char *)c,BIO_CTRL_SET,e,1L);
-	}
-
diff --git a/crypto/openssl/crypto/pkcs7/dec.c b/crypto/openssl/crypto/pkcs7/dec.c
deleted file mode 100644
index 6752ec568a91..000000000000
--- a/crypto/openssl/crypto/pkcs7/dec.c
+++ /dev/null
@@ -1,248 +0,0 @@
-/* crypto/pkcs7/verify.c */
-/* Copyright (C) 1995-1998 Eric Young (eay@cryptsoft.com)
- * All rights reserved.
- *
- * This package is an SSL implementation written
- * by Eric Young (eay@cryptsoft.com).
- * The implementation was written so as to conform with Netscapes SSL.
- * 
- * This library is free for commercial and non-commercial use as long as
- * the following conditions are aheared to.  The following conditions
- * apply to all code found in this distribution, be it the RC4, RSA,
- * lhash, DES, etc., code; not just the SSL code.  The SSL documentation
- * included with this distribution is covered by the same copyright terms
- * except that the holder is Tim Hudson (tjh@cryptsoft.com).
- * 
- * Copyright remains Eric Young's, and as such any Copyright notices in
- * the code are not to be removed.
- * If this package is used in a product, Eric Young should be given attribution
- * as the author of the parts of the library used.
- * This can be in the form of a textual message at program startup or
- * in documentation (online or textual) provided with the package.
- * 
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions
- * are met:
- * 1. Redistributions of source code must retain the copyright
- *    notice, this list of conditions and the following disclaimer.
- * 2. Redistributions in binary form must reproduce the above copyright
- *    notice, this list of conditions and the following disclaimer in the
- *    documentation and/or other materials provided with the distribution.
- * 3. All advertising materials mentioning features or use of this software
- *    must display the following acknowledgement:
- *    "This product includes cryptographic software written by
- *     Eric Young (eay@cryptsoft.com)"
- *    The word 'cryptographic' can be left out if the rouines from the library
- *    being used are not cryptographic related :-).
- * 4. If you include any Windows specific code (or a derivative thereof) from 
- *    the apps directory (application code) you must include an acknowledgement:
- *    "This product includes software written by Tim Hudson (tjh@cryptsoft.com)"
- * 
- * THIS SOFTWARE IS PROVIDED BY ERIC YOUNG ``AS IS'' AND
- * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
- * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
- * ARE DISCLAIMED.  IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE
- * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
- * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
- * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
- * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
- * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
- * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
- * SUCH DAMAGE.
- * 
- * The licence and distribution terms for any publically available version or
- * derivative of this code cannot be changed.  i.e. this code cannot simply be
- * copied and put under another distribution licence
- * [including the GNU Public Licence.]
- */
-#include <stdio.h>
-#include <stdlib.h>
-#include <string.h>
-#include <openssl/bio.h>
-#include <openssl/x509.h>
-#include <openssl/pem.h>
-#include <openssl/err.h>
-#include <openssl/asn1.h>
-
-int verify_callback(int ok, X509_STORE_CTX *ctx);
-
-BIO *bio_err=NULL;
-
-int main(argc,argv)
-int argc;
-char *argv[];
-	{
-	char *keyfile=NULL;
-	BIO *in;
-	EVP_PKEY *pkey;
-	X509 *x509;
-	PKCS7 *p7;
-	PKCS7_SIGNER_INFO *si;
-	X509_STORE_CTX cert_ctx;
-	X509_STORE *cert_store=NULL;
-	BIO *data,*detached=NULL,*p7bio=NULL;
-	char buf[1024*4];
-	unsigned char *pp;
-	int i,printit=0;
-	STACK_OF(PKCS7_SIGNER_INFO) *sk;
-
-	OpenSSL_add_all_algorithms();
-	bio_err=BIO_new_fp(stderr,BIO_NOCLOSE);
-
-	data=BIO_new(BIO_s_file());
-	pp=NULL;
-	while (argc > 1)
-		{
-		argc--;
-		argv++;
-		if (strcmp(argv[0],"-p") == 0)
-			{
-			printit=1;
-			}
-		else if ((strcmp(argv[0],"-k") == 0) && (argc >= 2)) {
-			keyfile = argv[1];
-			argc-=1;
-			argv+=1;
-		} else if ((strcmp(argv[0],"-d") == 0) && (argc >= 2))
-			{
-			detached=BIO_new(BIO_s_file());
-			if (!BIO_read_filename(detached,argv[1]))
-				goto err;
-			argc-=1;
-			argv+=1;
-			}
-		else break;
-		}
-
-	 if (!BIO_read_filename(data,argv[0])) goto err; 
-
-	if(!keyfile) {
-		fprintf(stderr, "No private key file specified\n");
-		goto err;
-	}
-
-        if ((in=BIO_new_file(keyfile,"r")) == NULL) goto err;
-        if ((x509=PEM_read_bio_X509(in,NULL,NULL,NULL)) == NULL) goto err;
-        BIO_reset(in);
-        if ((pkey=PEM_read_bio_PrivateKey(in,NULL,NULL,NULL)) == NULL)
-		goto err;
-        BIO_free(in);
-
-	if (pp == NULL)
-		BIO_set_fp(data,stdin,BIO_NOCLOSE);
-
-
-	/* Load the PKCS7 object from a file */
-	if ((p7=PEM_read_bio_PKCS7(data,NULL,NULL,NULL)) == NULL) goto err;
-
-
-
-	/* This stuff is being setup for certificate verification.
-	 * When using SSL, it could be replaced with a 
-	 * cert_stre=SSL_CTX_get_cert_store(ssl_ctx); */
-	cert_store=X509_STORE_new();
-	X509_STORE_set_default_paths(cert_store);
-	X509_STORE_load_locations(cert_store,NULL,"../../certs");
-	X509_STORE_set_verify_cb_func(cert_store,verify_callback);
-
-	ERR_clear_error();
-
-	/* We need to process the data */
-	/* We cannot support detached encryption */
-	p7bio=PKCS7_dataDecode(p7,pkey,detached,x509);
-
-	if (p7bio == NULL)
-		{
-		printf("problems decoding\n");
-		goto err;
-		}
-
-	/* We now have to 'read' from p7bio to calculate digests etc. */
-	for (;;)
-		{
-		i=BIO_read(p7bio,buf,sizeof(buf));
-		/* print it? */
-		if (i <= 0) break;
-		fwrite(buf,1, i, stdout);
-		}
-
-	/* We can now verify signatures */
-	sk=PKCS7_get_signer_info(p7);
-	if (sk == NULL)
-		{
-		fprintf(stderr, "there are no signatures on this data\n");
-		}
-	else
-		{
-		/* Ok, first we need to, for each subject entry,
-		 * see if we can verify */
-		ERR_clear_error();
-		for (i=0; i<sk_PKCS7_SIGNER_INFO_num(sk); i++)
-			{
-			si=sk_PKCS7_SIGNER_INFO_value(sk,i);
-			i=PKCS7_dataVerify(cert_store,&cert_ctx,p7bio,p7,si);
-			if (i <= 0)
-				goto err;
-			else
-				fprintf(stderr,"Signature verified\n");
-			}
-		}
-	X509_STORE_free(cert_store);
-
-	exit(0);
-err:
-	ERR_load_crypto_strings();
-	ERR_print_errors_fp(stderr);
-	exit(1);
-	}
-
-/* should be X509 * but we can just have them as char *. */
-int verify_callback(int ok, X509_STORE_CTX *ctx)
-	{
-	char buf[256];
-	X509 *err_cert;
-	int err,depth;
-
-	err_cert=X509_STORE_CTX_get_current_cert(ctx);
-	err=	X509_STORE_CTX_get_error(ctx);
-	depth=	X509_STORE_CTX_get_error_depth(ctx);
-
-	X509_NAME_oneline(X509_get_subject_name(err_cert),buf,256);
-	BIO_printf(bio_err,"depth=%d %s\n",depth,buf);
-	if (!ok)
-		{
-		BIO_printf(bio_err,"verify error:num=%d:%s\n",err,
-			X509_verify_cert_error_string(err));
-		if (depth < 6)
-			{
-			ok=1;
-			X509_STORE_CTX_set_error(ctx,X509_V_OK);
-			}
-		else
-			{
-			ok=0;
-			X509_STORE_CTX_set_error(ctx,X509_V_ERR_CERT_CHAIN_TOO_LONG);
-			}
-		}
-	switch (ctx->error)
-		{
-	case X509_V_ERR_UNABLE_TO_GET_ISSUER_CERT:
-		X509_NAME_oneline(X509_get_issuer_name(ctx->current_cert),buf,256);
-		BIO_printf(bio_err,"issuer= %s\n",buf);
-		break;
-	case X509_V_ERR_CERT_NOT_YET_VALID:
-	case X509_V_ERR_ERROR_IN_CERT_NOT_BEFORE_FIELD:
-		BIO_printf(bio_err,"notBefore=");
-		ASN1_UTCTIME_print(bio_err,X509_get_notBefore(ctx->current_cert));
-		BIO_printf(bio_err,"\n");
-		break;
-	case X509_V_ERR_CERT_HAS_EXPIRED:
-	case X509_V_ERR_ERROR_IN_CERT_NOT_AFTER_FIELD:
-		BIO_printf(bio_err,"notAfter=");
-		ASN1_UTCTIME_print(bio_err,X509_get_notAfter(ctx->current_cert));
-		BIO_printf(bio_err,"\n");
-		break;
-		}
-	BIO_printf(bio_err,"verify return:%d\n",ok);
-	return(ok);
-	}
diff --git a/crypto/openssl/crypto/pkcs7/des.pem b/crypto/openssl/crypto/pkcs7/des.pem
deleted file mode 100644
index 62d1657e3e79..000000000000
--- a/crypto/openssl/crypto/pkcs7/des.pem
+++ /dev/null
@@ -1,15 +0,0 @@
-
-MIAGCSqGSIb3DQEHA6CAMIACAQAxggHmMIHwAgEAMIGZMIGSMQswCQYDVQQGEwJBVTETMBEG
-A1UECBMKUXVlZW5zbGFuZDERMA8GA1UEBxMIQnJpc2JhbmUxGjAYBgNVBAoTEUNyeXB0c29m
-dCBQdHkgTHRkMSIwIAYDVQQLExlERU1PTlNUUkFUSU9OIEFORCBURVNUSU5HMRswGQYDVQQD
-ExJERU1PIFpFUk8gVkFMVUUgQ0ECAgR+MA0GCSqGSIb3DQEBAQUABEC2vXI1xQDW6lUHM3zQ
-/9uBEBOO5A3TtkrklAXq7v01gsIC21t52qSk36REXY+slhNZ0OQ349tgkTsoETHFLoEwMIHw
-AgEAMIGZMIGSMQswCQYDVQQGEwJBVTETMBEGA1UECBMKUXVlZW5zbGFuZDERMA8GA1UEBxMI
-QnJpc2JhbmUxGjAYBgNVBAoTEUNyeXB0c29mdCBQdHkgTHRkMSIwIAYDVQQLExlERU1PTlNU
-UkFUSU9OIEFORCBURVNUSU5HMRswGQYDVQQDExJERU1PIFpFUk8gVkFMVUUgQ0ECAgR9MA0G
-CSqGSIb3DQEBAQUABEB8ujxbabxXUYJhopuDm3oDq4JNqX6Io4p3ro+ShqfIndsXTZ1v5a2N
-WtLLCWlHn/habjBwZ/DgQgcKASbZ7QxNMIAGCSqGSIb3DQEHATAaBggqhkiG9w0DAjAOAgIA
-oAQIbsL5v1wX98KggAQoAaJ4WHm68fXY1WE5OIjfVBIDpO1K+i8dmKhjnAjrjoyZ9Bwc8rDL
-lgQg4CXb805h5xl+GfvSwUaHJayte1m2mcOhs3J2YyqbQ+MEIMIiJQccmhO3oDKm36CFvYR8
-5PjpclVcZyX2ngbwPFMnBAgy0clOAE6UKAAAAAAAAAAAAAA=
-
diff --git a/crypto/openssl/crypto/pkcs7/doc b/crypto/openssl/crypto/pkcs7/doc
deleted file mode 100644
index d2e8b7b2a3df..000000000000
--- a/crypto/openssl/crypto/pkcs7/doc
+++ /dev/null
@@ -1,24 +0,0 @@
-int PKCS7_set_content_type(PKCS7 *p7, int type);
-Call to set the type of PKCS7 object we are working on
-
-int PKCS7_SIGNER_INFO_set(PKCS7_SIGNER_INFO *p7i, X509 *x509, EVP_PKEY *pkey,
-	EVP_MD *dgst);
-Use this to setup a signer info
-There will also be functions to add signed and unsigned attributes.
-
-int PKCS7_add_signer(PKCS7 *p7, PKCS7_SIGNER_INFO *p7i);
-Add a signer info to the content.
-
-int PKCS7_add_certificae(PKCS7 *p7, X509 *x509);
-int PKCS7_add_crl(PKCS7 *p7, X509_CRL *x509);
-
-----
-
-p7=PKCS7_new();
-PKCS7_set_content_type(p7,NID_pkcs7_signed);
-
-signer=PKCS7_SINGNER_INFO_new();
-PKCS7_SIGNER_INFO_set(signer,x509,pkey,EVP_md5());
-PKCS7_add_signer(py,signer);
-
-we are now setup.
diff --git a/crypto/openssl/crypto/pkcs7/enc.c b/crypto/openssl/crypto/pkcs7/enc.c
deleted file mode 100644
index 7417f8a4e00b..000000000000
--- a/crypto/openssl/crypto/pkcs7/enc.c
+++ /dev/null
@@ -1,174 +0,0 @@
-/* crypto/pkcs7/enc.c */
-/* Copyright (C) 1995-1998 Eric Young (eay@cryptsoft.com)
- * All rights reserved.
- *
- * This package is an SSL implementation written
- * by Eric Young (eay@cryptsoft.com).
- * The implementation was written so as to conform with Netscapes SSL.
- * 
- * This library is free for commercial and non-commercial use as long as
- * the following conditions are aheared to.  The following conditions
- * apply to all code found in this distribution, be it the RC4, RSA,
- * lhash, DES, etc., code; not just the SSL code.  The SSL documentation
- * included with this distribution is covered by the same copyright terms
- * except that the holder is Tim Hudson (tjh@cryptsoft.com).
- * 
- * Copyright remains Eric Young's, and as such any Copyright notices in
- * the code are not to be removed.
- * If this package is used in a product, Eric Young should be given attribution
- * as the author of the parts of the library used.
- * This can be in the form of a textual message at program startup or
- * in documentation (online or textual) provided with the package.
- * 
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions
- * are met:
- * 1. Redistributions of source code must retain the copyright
- *    notice, this list of conditions and the following disclaimer.
- * 2. Redistributions in binary form must reproduce the above copyright
- *    notice, this list of conditions and the following disclaimer in the
- *    documentation and/or other materials provided with the distribution.
- * 3. All advertising materials mentioning features or use of this software
- *    must display the following acknowledgement:
- *    "This product includes cryptographic software written by
- *     Eric Young (eay@cryptsoft.com)"
- *    The word 'cryptographic' can be left out if the rouines from the library
- *    being used are not cryptographic related :-).
- * 4. If you include any Windows specific code (or a derivative thereof) from 
- *    the apps directory (application code) you must include an acknowledgement:
- *    "This product includes software written by Tim Hudson (tjh@cryptsoft.com)"
- * 
- * THIS SOFTWARE IS PROVIDED BY ERIC YOUNG ``AS IS'' AND
- * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
- * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
- * ARE DISCLAIMED.  IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE
- * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
- * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
- * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
- * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
- * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
- * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
- * SUCH DAMAGE.
- * 
- * The licence and distribution terms for any publically available version or
- * derivative of this code cannot be changed.  i.e. this code cannot simply be
- * copied and put under another distribution licence
- * [including the GNU Public Licence.]
- */
-#include <stdio.h>
-#include <string.h>
-#include <openssl/bio.h>
-#include <openssl/x509.h>
-#include <openssl/pem.h>
-#include <openssl/err.h>
-
-int main(argc,argv)
-int argc;
-char *argv[];
-	{
-	X509 *x509;
-	PKCS7 *p7;
-	BIO *in;
-	BIO *data,*p7bio;
-	char buf[1024*4];
-	int i;
-	int nodetach=1;
-	char *keyfile = NULL;
-	const EVP_CIPHER *cipher=NULL;
-	STACK_OF(X509) *recips=NULL;
-
-	OpenSSL_add_all_algorithms();
-
-	data=BIO_new(BIO_s_file());
-	while(argc > 1)
-		{
-		if (strcmp(argv[1],"-nd") == 0)
-			{
-			nodetach=1;
-			argv++; argc--;
-			}
-		else if ((strcmp(argv[1],"-c") == 0) && (argc >= 2)) {
-			if(!(cipher = EVP_get_cipherbyname(argv[2]))) {
-				fprintf(stderr, "Unknown cipher %s\n", argv[2]);
-				goto err;
-			}
-			argc-=2;
-			argv+=2;
-		} else if ((strcmp(argv[1],"-k") == 0) && (argc >= 2)) {
-			keyfile = argv[2];
-			argc-=2;
-			argv+=2;
-			if (!(in=BIO_new_file(keyfile,"r"))) goto err;
-			if (!(x509=PEM_read_bio_X509(in,NULL,NULL,NULL)))
-				goto err;
-			if(!recips) recips = sk_X509_new_null();
-			sk_X509_push(recips, x509);
-			BIO_free(in);
-		} else break;
-	}
-
-	if(!recips) {
-		fprintf(stderr, "No recipients\n");
-		goto err;
-	}
-
-	if (!BIO_read_filename(data,argv[1])) goto err;
-
-	p7=PKCS7_new();
-#if 0
-	BIO_reset(in);
-	if ((pkey=PEM_read_bio_PrivateKey(in,NULL,NULL)) == NULL) goto err;
-	BIO_free(in);
-	PKCS7_set_type(p7,NID_pkcs7_signedAndEnveloped);
-	 
-	if (PKCS7_add_signature(p7,x509,pkey,EVP_sha1()) == NULL) goto err;
-	/* we may want to add more */
-	PKCS7_add_certificate(p7,x509);
-#else
-	PKCS7_set_type(p7,NID_pkcs7_enveloped);
-#endif
-	if(!cipher)	{
-#ifndef OPENSSL_NO_DES
-		cipher = EVP_des_ede3_cbc();
-#else
-		fprintf(stderr, "No cipher selected\n");
-		goto err;
-#endif
-	}
-
-	if (!PKCS7_set_cipher(p7,cipher)) goto err;
-	for(i = 0; i < sk_X509_num(recips); i++) {
-		if (!PKCS7_add_recipient(p7,sk_X509_value(recips, i))) goto err;
-	}
-	sk_X509_pop_free(recips, X509_free);
-
-	/* Set the content of the signed to 'data' */
-	/* PKCS7_content_new(p7,NID_pkcs7_data); not used in envelope */
-
-	/* could be used, but not in this version :-)
-	if (!nodetach) PKCS7_set_detached(p7,1);
-	*/
-
-	if ((p7bio=PKCS7_dataInit(p7,NULL)) == NULL) goto err;
-
-	for (;;)
-		{
-		i=BIO_read(data,buf,sizeof(buf));
-		if (i <= 0) break;
-		BIO_write(p7bio,buf,i);
-		}
-	BIO_flush(p7bio);
-
-	if (!PKCS7_dataFinal(p7,p7bio)) goto err;
-	BIO_free(p7bio);
-
-	PEM_write_PKCS7(stdout,p7);
-	PKCS7_free(p7);
-
-	exit(0);
-err:
-	ERR_load_crypto_strings();
-	ERR_print_errors_fp(stderr);
-	exit(1);
-	}
-
diff --git a/crypto/openssl/crypto/pkcs7/es1.pem b/crypto/openssl/crypto/pkcs7/es1.pem
deleted file mode 100644
index 47112a238fd2..000000000000
--- a/crypto/openssl/crypto/pkcs7/es1.pem
+++ /dev/null
@@ -1,66 +0,0 @@
------BEGIN PKCS7-----
-MIAGCSqGSIb3DQEHA6CAMIACAQAxggHmMIHwAgEAMIGZMIGSMQswCQYDVQQGEwJBVTETMBEG
-A1UECBMKUXVlZW5zbGFuZDERMA8GA1UEBxMIQnJpc2JhbmUxGjAYBgNVBAoTEUNyeXB0c29m
-dCBQdHkgTHRkMSIwIAYDVQQLExlERU1PTlNUUkFUSU9OIEFORCBURVNUSU5HMRswGQYDVQQD
-ExJERU1PIFpFUk8gVkFMVUUgQ0ECAgRuMA0GCSqGSIb3DQEBAQUABEDWak0y/5XZJhQJeCLo
-KECcHXkTEbjzYkYNHIinbiPmRK4QbNfs9z2mA3z/c2ykQ4eAqFR2jyNrUMN/+I5XEiv6MIHw
-AgEAMIGZMIGSMQswCQYDVQQGEwJBVTETMBEGA1UECBMKUXVlZW5zbGFuZDERMA8GA1UEBxMI
-QnJpc2JhbmUxGjAYBgNVBAoTEUNyeXB0c29mdCBQdHkgTHRkMSIwIAYDVQQLExlERU1PTlNU
-UkFUSU9OIEFORCBURVNUSU5HMRswGQYDVQQDExJERU1PIFpFUk8gVkFMVUUgQ0ECAgR9MA0G
-CSqGSIb3DQEBAQUABEAWg9+KgtCjc77Jdj1Ve4wGgHjVHbbSYEA1ZqKFDoi15vSr9hfpHmC4
-ycZzcRo16JkTfolefiHZzmyjVz94vSN6MIAGCSqGSIb3DQEHATAaBggqhkiG9w0DAjAOAgIA
-oAQI7X4Tk4mcbV6ggASBsHl1mCaJ3RhXWlNPCgCRU53d7M5x6TDZRkvwdtdvW96m1lupT03F
-XtonkBqk7oMkH7kGfs5/REQOPjx0QE2Ixmgt1W3szum82EZwA7pZNppcraK7W/odw/7bYZO+
-II3HPmRklE2N9qiu1LPaPUsnYogkO6SennyeL5tZ382vBweL/8pnG0qsbT1OBb65v+llnsjT
-pa1T/p+fIx/iJJGE6K9fYFokC6gXLQ6ozXRdOu5oBDB8mPCYYvAqKycidM/MrGGUkpEtS4f0
-lS31PwQi5YTim8Ig3/TOwVpPX32i46FTuEIEIMHkD/OvpfwCCzXUHHJnKnKUAUvIsSY3vGBs
-8ezpUDfBBBj9LHDy32hZ2tQilkDefP5VM2LLdrWgamYEgfiyITQvn08Ul5lQOQxbFKBheFq5
-otCCN4MR+w5eq12xQu6y+f9z0159ag2ru87D0lLtUtXXtCELbO1nUkT2sJ0k/iDs9TOXr6Cx
-go1XKYho83hlkXYiCteVizdAbgVGNsNRD4wtIdajsorET/LuJECgp11YeL9w1dlDB0HLEZfi
-XCsUphH4jGagba3hDeUSibnjSiJlN0ukfuQurBBbI2UkBAujiEAubKPn7C1FZJRSw6CPPX5t
-KEpmcqT1JNk6LO8Js6/1sCmmBh1VGCy1+EuTI9J1p7Dagf4nQ8cHitoCRpHuKZlFHnZyv7tw
-Rn/KOhHaYP2VzAh40gQIvKMAAWh9oFsEEIMwIoOmLwLH5wf+8QdbDhoECH8HwZt9a12dBAjL
-r4j2zlvtfgQIt7nmEM3wz1EECKlc3EIy1irCBBCAKINcermK3A+jI6ISN2RzBFA3dsh/xwMu
-l61aWMBBZzEz/SF92k6n35KZhCC0d6fIVC/1WMv0fnCwQ8oEDynSre216VEFiYKBaQLJe5o/
-mTAxC7Ht3goXnuc+i1FItOkLrgRI/wyvTICEn2WsNZiMADnGaee2bqPnUopo+VMGexJEtCPk
-l0ZNlDJGquPDkpUwaEtecVZzCNyVPYyyF4J/l8rmGDhDdYUIC8IKBEg/ip/E0BuubBLWVbv+
-HRl4QrnGpyCyeXRXXK603QP3sT1Zbbm1v5pI/loOhVHi724LmtXHSyp5qv9MDcxE1PoX10LY
-gBRtlwwESPeCF8bK5jk4xIQMhK5NMHj1Y1KQWTZ9NGITBL4hjRq2qp4Qk5GIpGgOVPopAuCo
-TIyPikpqBRNtLSPRSsDs6QPUPzWBh6JgxwRQblnDKKUkxUcnJiD4i9QtGa/ZabMn4KxtNOBL
-5JSh1nJkaLXCZY070131WWPAByLcd5TiXq8x84pmzV5NNk4tiMpoXhJNsx8e4rskQQlKd6ME
-SCe2eYDHKcKPX3WJbUzhrJSQ92/aWnI2iUY8WQ+kSNyiZ2QUjyuUg9Z66g/0d2STlvPOBHT/
-y5ODP2CwbcWX4QmCbUc9TT66fQRIrRVuwvtOfnUueyGgYhJ3HpAJfVaB/7kap5bj7Fi/azW4
-9JDfd1bC/W9h0Kyk7RO2gxvE0hIHc26mZJHTm9MNP5D328MnM2MdBEjKjQBtgrp+lFIii7MP
-nGHFTKUkG4WAIZJCf/CsT+p6/SW0qG71Me/YcSw5STB24j+a+HgMV8RVIeUlkP4z0IWWrSoB
-Gh4d/Z0EUMCVHs/HZ/bWgiyhtHpvuVAzidm8D81p1LJ5BQX5/5f/m+q5+fS/npL27dTEbNqs
-LSB6ij3MZAi7LwHWpTn9zWnDajCMEj9vlaV7mcKtHK5iBEg85agFi1h3MvicqLtoFe5hVv9T
-tG0j6CRkjkixPzivltlrf44KHv14gLM0XJxCGyq7vd3l8QYr3+9at0zNnX/yqTiBnsnE5dUE
-SIgrYuz87M2gi/ER9PcDoTtONH3+CkcqVy03q/Sj8cVWD/b1KgEhqnNOfc8Ak9PctyR/ItcR
-8Me5XVn1GJKkQJk4O29fxvgNoAQIrIESvUWGshAEQByXiFoFTDUByjTlgjcy77H1lrH+y3P/
-wAInJjJAut9kCNyGJV0PA4kdPB5USWltuO6t8gk4Pd2YBMl09zqUWkAEUCjFrtZ3mapjcGZI
-uQTASKR5LSjXoWxTT5gae/+64MerF/oCEeO3ehRTpjnPrsiRDo0rWIQTaj9+Nro8Z2xtWstw
-RnfoAHIxV1lEamPwjsceBEi2SD9hiifFeO5ECiVoaE1FdXUXhU+jwYAMx6jHWO9hMkYzS9pM
-Y3IyWR5ybtOjiQgkUdvRJPUPGf5DVVMPnymGX25aDh5PYpIESPbsM9akCpOOVuscywcUswmU
-o7dXvlB48WWCfg/al3BQKAZbn5ZXtWNwpUZkrEdHsrxAVv3rxRcdkT3Z1fzUbIuYkLJN200o
-WgRIJvn6RO8KEj7/HOg2sYuuM8nz1kR0TSgwX7/0y/7JfjBa0JIlP7o75sNJscE8oyoIMzuy
-Dvn6/U9g3BCDXn83A/s+ke60qn9gBFC6NAeLOlXal1YVWYhMQNOqCyUfAjiXBTawaysQb1Mk
-YgeNlF8xuEFcUQWIP+vNG7FJ5JPMaMRL4YEoaQ3sVFhYOERJR1cSb+8xt4QCYtBKQgRIUOmJ
-CHW5o1hXJWJiTkZK2qWFcEMzTINSj5EpYFySr8aVBjkRnI7vxegRT/+XZZXoYedQ3UNsnGI3
-DdkWii5VzX0PNF6C60pfBEiVpausYuX7Wjb3Lfm8cBj7GgN69i6Pm2gxtobVcmpo2nS4D714
-ePyhlX9n8kJ6QAcqWMRj22smDPrHVGNTizfzHBh5zNllK9gESJizILOWI327og3ZWp+qUht5
-kNDJCzMK7Z09UAy+h+vq0VTQuEo3FgLzVdqkJujjSL4Nx97lXg51AovrEn3nd4evydwcjKLX
-1wRIo72NaeWuUEQ+rt1SlCsOJ7k1ioJSqhrPOfvwcaFcb4beVet1JWiy4yvowTjLDGbUje2s
-xjrlVt4BJWI/uA6jbQsrxSe89ADZBAi5YAlR4qszeAQIXD3VSBVKbRUECNTtyvw9vvqXBAhb
-IZNn4H4cxgQI+XW7GkfL+ekECCCCg2reMyGDBAh1PYqkg3lw3gQQkNlggEPU+BH8eh7Gm7n7
-7AQIjC5EWbkil5cEEKcpuqwTWww/X89KnQAg8TcECJPomqHvrlZFBBiRSuIiHpmN+PaujXpv
-qZV2VhjkB2j09GEECOIdv8AVOJgKBAjlHgIqAD9jZQQIXHbs44+wogcEIGGqTACRJxrhMcMG
-X8drNjksIPt+snxTXUBIkTVpZWoABAh6unXPTyIr8QQgBF8xKoX27MWk7iTNmkSNZggZXa2a
-DWCGHSYLngbSOHIECD9XmO6VsvTgBAjfqB70CEW4WwQIVIBkbCocznUEEHB/zFXy/sR4OYHe
-UfbNPnIEEDWBB/NTCLMGE+o8BfyujcAECFik7GQnnF9VBBAhLXExQeWAofZNc6NtN7qZBCC1
-gVIS3ruTwKltmcrgx3heT3M8ZJhCfWa+6KzchnmKygQQ+1NL5sSzR4m/fdrqxHFyUAQYCT2x
-PamQr3wK3h0lyZER+4H0zPM86AhFBBC3CkmvL2vjflMfujnzPBVpBBge9rMbI5+0q9DLrTiT
-5F3AIgXLpD8PQWAECHkHVo6RomV3BAgMbi8E271UeAQIqtS8wnI3XngECG3TWmOMb3/iBEha
-y+mvCS6I3n3JfL8e1B5P4qX9/czJRaERLuKpGNjLiL4A+zxN0LZ0UHd0qfmJjwOTxAx3iJAC
-lGXX4nB9ATYPUT5EU+o1Y4sECN01pP6vWNIdBDAsiE0Ts8/9ltJlqX2B3AoOM4qOt9EaCjXf
-lB+aEmrhtjUwuZ6GqS5Ke7P6XnakTk4ECCLIMatNdootAAAAAAAAAAAAAA==
------END PKCS7-----
diff --git a/crypto/openssl/crypto/pkcs7/example.c b/crypto/openssl/crypto/pkcs7/example.c
deleted file mode 100644
index 2953d04b5c90..000000000000
--- a/crypto/openssl/crypto/pkcs7/example.c
+++ /dev/null
@@ -1,329 +0,0 @@
-#include <stdio.h>
-#include <stdlib.h>
-#include <string.h>
-#include <openssl/pkcs7.h>
-#include <openssl/asn1_mac.h>
-#include <openssl/x509.h>
-
-int add_signed_time(PKCS7_SIGNER_INFO *si)
-	{
-	ASN1_UTCTIME *sign_time;
-
-	/* The last parameter is the amount to add/subtract from the current
-	 * time (in seconds) */
-	sign_time=X509_gmtime_adj(NULL,0);
-	PKCS7_add_signed_attribute(si,NID_pkcs9_signingTime,
-		V_ASN1_UTCTIME,(char *)sign_time);
-	return(1);
-	}
-
-ASN1_UTCTIME *get_signed_time(PKCS7_SIGNER_INFO *si)
-	{
-	ASN1_TYPE *so;
-
-	so=PKCS7_get_signed_attribute(si,NID_pkcs9_signingTime);
-	if (so->type == V_ASN1_UTCTIME)
-	    return so->value.utctime;
-	return NULL;
-	}
-	
-static int signed_string_nid= -1;
-
-void add_signed_string(PKCS7_SIGNER_INFO *si, char *str)
-	{
-	ASN1_OCTET_STRING *os;
-
-	/* To a an object of OID 1.2.3.4.5, which is an octet string */
-	if (signed_string_nid == -1)
-		signed_string_nid=
-			OBJ_create("1.2.3.4.5","OID_example","Our example OID");
-	os=ASN1_OCTET_STRING_new();
-	ASN1_OCTET_STRING_set(os,(unsigned char*)str,strlen(str));
-	/* When we add, we do not free */
-	PKCS7_add_signed_attribute(si,signed_string_nid,
-		V_ASN1_OCTET_STRING,(char *)os);
-	}
-
-int get_signed_string(PKCS7_SIGNER_INFO *si, char *buf, int len)
-	{
-	ASN1_TYPE *so;
-	ASN1_OCTET_STRING *os;
-	int i;
-
-	if (signed_string_nid == -1)
-		signed_string_nid=
-			OBJ_create("1.2.3.4.5","OID_example","Our example OID");
-	/* To retrieve */
-	so=PKCS7_get_signed_attribute(si,signed_string_nid);
-	if (so != NULL)
-		{
-		if (so->type == V_ASN1_OCTET_STRING)
-			{
-			os=so->value.octet_string;
-			i=os->length;
-			if ((i+1) > len)
-				i=len-1;
-			memcpy(buf,os->data,i);
-			return(i);
-			}
-		}
-	return(0);
-	}
-
-static int signed_seq2string_nid= -1;
-/* ########################################### */
-int add_signed_seq2string(PKCS7_SIGNER_INFO *si, char *str1, char *str2)
-	{
-	/* To add an object of OID 1.9.999, which is a sequence containing
-	 * 2 octet strings */
-	unsigned char *p;
-	ASN1_OCTET_STRING *os1,*os2;
-	ASN1_STRING *seq;
-	unsigned char *data;
-	int i,total;
-
-	if (signed_seq2string_nid == -1)
-		signed_seq2string_nid=
-			OBJ_create("1.9.9999","OID_example","Our example OID");
-
-	os1=ASN1_OCTET_STRING_new();
-	os2=ASN1_OCTET_STRING_new();
-	ASN1_OCTET_STRING_set(os1,(unsigned char*)str1,strlen(str1));
-	ASN1_OCTET_STRING_set(os2,(unsigned char*)str1,strlen(str1));
-	i =i2d_ASN1_OCTET_STRING(os1,NULL);
-	i+=i2d_ASN1_OCTET_STRING(os2,NULL);
-	total=ASN1_object_size(1,i,V_ASN1_SEQUENCE);
-
-	data=malloc(total);
-	p=data;
-	ASN1_put_object(&p,1,i,V_ASN1_SEQUENCE,V_ASN1_UNIVERSAL);
-	i2d_ASN1_OCTET_STRING(os1,&p);
-	i2d_ASN1_OCTET_STRING(os2,&p);
-
-	seq=ASN1_STRING_new();
-	ASN1_STRING_set(seq,data,total);
-	free(data);
-	ASN1_OCTET_STRING_free(os1);
-	ASN1_OCTET_STRING_free(os2);
-
-	PKCS7_add_signed_attribute(si,signed_seq2string_nid,
-		V_ASN1_SEQUENCE,(char *)seq);
-	return(1);
-	}
-
-/* For this case, I will malloc the return strings */
-int get_signed_seq2string(PKCS7_SIGNER_INFO *si, char **str1, char **str2)
-	{
-	ASN1_TYPE *so;
-
-	if (signed_seq2string_nid == -1)
-		signed_seq2string_nid=
-			OBJ_create("1.9.9999","OID_example","Our example OID");
-	/* To retrieve */
-	so=PKCS7_get_signed_attribute(si,signed_seq2string_nid);
-	if (so && (so->type == V_ASN1_SEQUENCE))
-		{
-		ASN1_const_CTX c;
-		ASN1_STRING *s;
-		long length;
-		ASN1_OCTET_STRING *os1,*os2;
-
-		s=so->value.sequence;
-		c.p=ASN1_STRING_data(s);
-		c.max=c.p+ASN1_STRING_length(s);
-		if (!asn1_GetSequence(&c,&length)) goto err;
-		/* Length is the length of the seqence */
-
-		c.q=c.p;
-		if ((os1=d2i_ASN1_OCTET_STRING(NULL,&c.p,c.slen)) == NULL) 
-			goto err;
-		c.slen-=(c.p-c.q);
-
-		c.q=c.p;
-		if ((os2=d2i_ASN1_OCTET_STRING(NULL,&c.p,c.slen)) == NULL) 
-			goto err;
-		c.slen-=(c.p-c.q);
-
-		if (!asn1_const_Finish(&c)) goto err;
-		*str1=malloc(os1->length+1);
-		*str2=malloc(os2->length+1);
-		memcpy(*str1,os1->data,os1->length);
-		memcpy(*str2,os2->data,os2->length);
-		(*str1)[os1->length]='\0';
-		(*str2)[os2->length]='\0';
-		ASN1_OCTET_STRING_free(os1);
-		ASN1_OCTET_STRING_free(os2);
-		return(1);
-		}
-err:
-	return(0);
-	}
-
-
-/* #######################################
- * THE OTHER WAY TO DO THINGS
- * #######################################
- */
-X509_ATTRIBUTE *create_time(void)
-	{
-	ASN1_UTCTIME *sign_time;
-	X509_ATTRIBUTE *ret;
-
-	/* The last parameter is the amount to add/subtract from the current
-	 * time (in seconds) */
-	sign_time=X509_gmtime_adj(NULL,0);
-	ret=X509_ATTRIBUTE_create(NID_pkcs9_signingTime,
-		V_ASN1_UTCTIME,(char *)sign_time);
-	return(ret);
-	}
-
-ASN1_UTCTIME *sk_get_time(STACK_OF(X509_ATTRIBUTE) *sk)
-	{
-	ASN1_TYPE *so;
-	PKCS7_SIGNER_INFO si;
-
-	si.auth_attr=sk;
-	so=PKCS7_get_signed_attribute(&si,NID_pkcs9_signingTime);
-	if (so->type == V_ASN1_UTCTIME)
-	    return so->value.utctime;
-	return NULL;
-	}
-	
-X509_ATTRIBUTE *create_string(char *str)
-	{
-	ASN1_OCTET_STRING *os;
-	X509_ATTRIBUTE *ret;
-
-	/* To a an object of OID 1.2.3.4.5, which is an octet string */
-	if (signed_string_nid == -1)
-		signed_string_nid=
-			OBJ_create("1.2.3.4.5","OID_example","Our example OID");
-	os=ASN1_OCTET_STRING_new();
-	ASN1_OCTET_STRING_set(os,(unsigned char*)str,strlen(str));
-	/* When we add, we do not free */
-	ret=X509_ATTRIBUTE_create(signed_string_nid,
-		V_ASN1_OCTET_STRING,(char *)os);
-	return(ret);
-	}
-
-int sk_get_string(STACK_OF(X509_ATTRIBUTE) *sk, char *buf, int len)
-	{
-	ASN1_TYPE *so;
-	ASN1_OCTET_STRING *os;
-	int i;
-	PKCS7_SIGNER_INFO si;
-
-	si.auth_attr=sk;
-
-	if (signed_string_nid == -1)
-		signed_string_nid=
-			OBJ_create("1.2.3.4.5","OID_example","Our example OID");
-	/* To retrieve */
-	so=PKCS7_get_signed_attribute(&si,signed_string_nid);
-	if (so != NULL)
-		{
-		if (so->type == V_ASN1_OCTET_STRING)
-			{
-			os=so->value.octet_string;
-			i=os->length;
-			if ((i+1) > len)
-				i=len-1;
-			memcpy(buf,os->data,i);
-			return(i);
-			}
-		}
-	return(0);
-	}
-
-X509_ATTRIBUTE *add_seq2string(PKCS7_SIGNER_INFO *si, char *str1, char *str2)
-	{
-	/* To add an object of OID 1.9.999, which is a sequence containing
-	 * 2 octet strings */
-	unsigned char *p;
-	ASN1_OCTET_STRING *os1,*os2;
-	ASN1_STRING *seq;
-	X509_ATTRIBUTE *ret;
-	unsigned char *data;
-	int i,total;
-
-	if (signed_seq2string_nid == -1)
-		signed_seq2string_nid=
-			OBJ_create("1.9.9999","OID_example","Our example OID");
-
-	os1=ASN1_OCTET_STRING_new();
-	os2=ASN1_OCTET_STRING_new();
-	ASN1_OCTET_STRING_set(os1,(unsigned char*)str1,strlen(str1));
-	ASN1_OCTET_STRING_set(os2,(unsigned char*)str1,strlen(str1));
-	i =i2d_ASN1_OCTET_STRING(os1,NULL);
-	i+=i2d_ASN1_OCTET_STRING(os2,NULL);
-	total=ASN1_object_size(1,i,V_ASN1_SEQUENCE);
-
-	data=malloc(total);
-	p=data;
-	ASN1_put_object(&p,1,i,V_ASN1_SEQUENCE,V_ASN1_UNIVERSAL);
-	i2d_ASN1_OCTET_STRING(os1,&p);
-	i2d_ASN1_OCTET_STRING(os2,&p);
-
-	seq=ASN1_STRING_new();
-	ASN1_STRING_set(seq,data,total);
-	free(data);
-	ASN1_OCTET_STRING_free(os1);
-	ASN1_OCTET_STRING_free(os2);
-
-	ret=X509_ATTRIBUTE_create(signed_seq2string_nid,
-		V_ASN1_SEQUENCE,(char *)seq);
-	return(ret);
-	}
-
-/* For this case, I will malloc the return strings */
-int sk_get_seq2string(STACK_OF(X509_ATTRIBUTE) *sk, char **str1, char **str2)
-	{
-	ASN1_TYPE *so;
-	PKCS7_SIGNER_INFO si;
-
-	if (signed_seq2string_nid == -1)
-		signed_seq2string_nid=
-			OBJ_create("1.9.9999","OID_example","Our example OID");
-
-	si.auth_attr=sk;
-	/* To retrieve */
-	so=PKCS7_get_signed_attribute(&si,signed_seq2string_nid);
-	if (so->type == V_ASN1_SEQUENCE)
-		{
-		ASN1_const_CTX c;
-		ASN1_STRING *s;
-		long length;
-		ASN1_OCTET_STRING *os1,*os2;
-
-		s=so->value.sequence;
-		c.p=ASN1_STRING_data(s);
-		c.max=c.p+ASN1_STRING_length(s);
-		if (!asn1_GetSequence(&c,&length)) goto err;
-		/* Length is the length of the seqence */
-
-		c.q=c.p;
-		if ((os1=d2i_ASN1_OCTET_STRING(NULL,&c.p,c.slen)) == NULL) 
-			goto err;
-		c.slen-=(c.p-c.q);
-
-		c.q=c.p;
-		if ((os2=d2i_ASN1_OCTET_STRING(NULL,&c.p,c.slen)) == NULL) 
-			goto err;
-		c.slen-=(c.p-c.q);
-
-		if (!asn1_const_Finish(&c)) goto err;
-		*str1=malloc(os1->length+1);
-		*str2=malloc(os2->length+1);
-		memcpy(*str1,os1->data,os1->length);
-		memcpy(*str2,os2->data,os2->length);
-		(*str1)[os1->length]='\0';
-		(*str2)[os2->length]='\0';
-		ASN1_OCTET_STRING_free(os1);
-		ASN1_OCTET_STRING_free(os2);
-		return(1);
-		}
-err:
-	return(0);
-	}
-
-
diff --git a/crypto/openssl/crypto/pkcs7/example.h b/crypto/openssl/crypto/pkcs7/example.h
deleted file mode 100644
index 96167de188d6..000000000000
--- a/crypto/openssl/crypto/pkcs7/example.h
+++ /dev/null
@@ -1,57 +0,0 @@
-/* ====================================================================
- * Copyright (c) 1999 The OpenSSL Project.  All rights reserved.
- *
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions
- * are met:
- *
- * 1. Redistributions of source code must retain the above copyright
- *    notice, this list of conditions and the following disclaimer. 
- *
- * 2. Redistributions in binary form must reproduce the above copyright
- *    notice, this list of conditions and the following disclaimer in
- *    the documentation and/or other materials provided with the
- *    distribution.
- *
- * 3. All advertising materials mentioning features or use of this
- *    software must display the following acknowledgment:
- *    "This product includes software developed by the OpenSSL Project
- *    for use in the OpenSSL Toolkit. (http://www.openssl.org/)"
- *
- * 4. The names "OpenSSL Toolkit" and "OpenSSL Project" must not be used to
- *    endorse or promote products derived from this software without
- *    prior written permission. For written permission, please contact
- *    openssl-core@openssl.org.
- *
- * 5. Products derived from this software may not be called "OpenSSL"
- *    nor may "OpenSSL" appear in their names without prior written
- *    permission of the OpenSSL Project.
- *
- * 6. Redistributions of any form whatsoever must retain the following
- *    acknowledgment:
- *    "This product includes software developed by the OpenSSL Project
- *    for use in the OpenSSL Toolkit (http://www.openssl.org/)"
- *
- * THIS SOFTWARE IS PROVIDED BY THE OpenSSL PROJECT ``AS IS'' AND ANY
- * EXPRESSED OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
- * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR
- * PURPOSE ARE DISCLAIMED.  IN NO EVENT SHALL THE OpenSSL PROJECT OR
- * ITS CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
- * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
- * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
- * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
- * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
- * STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
- * ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED
- * OF THE POSSIBILITY OF SUCH DAMAGE.
- * ====================================================================
- *
- * This product includes cryptographic software written by Eric Young
- * (eay@cryptsoft.com).  This product includes software written by Tim
- * Hudson (tjh@cryptsoft.com).
- *
- */
-
-int add_signed_time(PKCS7_SIGNER_INFO *si);
-ASN1_UTCTIME *get_signed_time(PKCS7_SIGNER_INFO *si);
-int get_signed_seq2string(PKCS7_SIGNER_INFO *si, char **str1, char **str2);
diff --git a/crypto/openssl/crypto/pkcs7/info.pem b/crypto/openssl/crypto/pkcs7/info.pem
deleted file mode 100644
index 989baf87096a..000000000000
--- a/crypto/openssl/crypto/pkcs7/info.pem
+++ /dev/null
@@ -1,57 +0,0 @@
-issuer :/C=AU/SP=Queensland/L=Brisbane/O=Cryptsoft Pty Ltd/OU=DEMONSTRATION AND TESTING/CN=DEMO ZERO VALUE CA
-subject:/C=AU/SP=Queensland/L=Brisbane/O=Cryptsoft Pty Ltd/OU=SMIME 003/CN=Information/Email=info@cryptsoft.com
-serial :047D
-
-Certificate:
-    Data:
-        Version: 3 (0x2)
-        Serial Number: 1149 (0x47d)
-        Signature Algorithm: md5withRSAEncryption
-        Issuer: C=AU, SP=Queensland, L=Brisbane, O=Cryptsoft Pty Ltd, OU=DEMONSTRATION AND TESTING, CN=DEMO ZERO VALUE CA
-        Validity
-            Not Before: May 13 05:40:58 1998 GMT
-            Not After : May 12 05:40:58 2000 GMT
-        Subject: C=AU, SP=Queensland, L=Brisbane, O=Cryptsoft Pty Ltd, OU=SMIME 003, CN=Information/Email=info@cryptsoft.com
-        Subject Public Key Info:
-            Public Key Algorithm: rsaEncryption
-                Modulus:
-                    00:ad:e7:23:89:ee:0d:87:b7:9c:32:44:4b:95:81:
-                    73:dd:22:80:4b:2d:c5:60:b8:fe:1e:18:63:ef:dc:
-                    89:89:22:df:95:3c:7a:db:3d:9a:06:a8:08:d6:29:
-                    fd:ef:41:09:91:ed:bc:ad:98:f9:f6:28:90:62:6f:
-                    e7:e7:0c:4d:0b
-                Exponent: 65537 (0x10001)
-        X509v3 extensions:
-            Netscape Comment: 
-                Generated with SSLeay
-    Signature Algorithm: md5withRSAEncryption
-        52:15:ea:88:f4:f0:f9:0b:ef:ce:d5:f8:83:40:61:16:5e:55:
-        f9:ce:2d:d1:8b:31:5c:03:c6:2d:10:7c:61:d5:5c:0a:42:97:
-        d1:fd:65:b6:b6:84:a5:39:ec:46:ec:fc:e0:0d:d9:22:da:1b:
-        50:74:ad:92:cb:4e:90:e5:fa:7d
-
------BEGIN CERTIFICATE-----
-MIICTDCCAfagAwIBAgICBH0wDQYJKoZIhvcNAQEEBQAwgZIxCzAJBgNVBAYTAkFV
-MRMwEQYDVQQIEwpRdWVlbnNsYW5kMREwDwYDVQQHEwhCcmlzYmFuZTEaMBgGA1UE
-ChMRQ3J5cHRzb2Z0IFB0eSBMdGQxIjAgBgNVBAsTGURFTU9OU1RSQVRJT04gQU5E
-IFRFU1RJTkcxGzAZBgNVBAMTEkRFTU8gWkVSTyBWQUxVRSBDQTAeFw05ODA1MTMw
-NTQwNThaFw0wMDA1MTIwNTQwNThaMIGeMQswCQYDVQQGEwJBVTETMBEGA1UECBMK
-UXVlZW5zbGFuZDERMA8GA1UEBxMIQnJpc2JhbmUxGjAYBgNVBAoTEUNyeXB0c29m
-dCBQdHkgTHRkMRIwEAYDVQQLEwlTTUlNRSAwMDMxFDASBgNVBAMTC0luZm9ybWF0
-aW9uMSEwHwYJKoZIhvcNAQkBFhJpbmZvQGNyeXB0c29mdC5jb20wXDANBgkqhkiG
-9w0BAQEFAANLADBIAkEArecjie4Nh7ecMkRLlYFz3SKASy3FYLj+Hhhj79yJiSLf
-lTx62z2aBqgI1in970EJke28rZj59iiQYm/n5wxNCwIDAQABoygwJjAkBglghkgB
-hvhCAQ0EFxYVR2VuZXJhdGVkIHdpdGggU1NMZWF5MA0GCSqGSIb3DQEBBAUAA0EA
-UhXqiPTw+QvvztX4g0BhFl5V+c4t0YsxXAPGLRB8YdVcCkKX0f1ltraEpTnsRuz8
-4A3ZItobUHStkstOkOX6fQ==
------END CERTIFICATE-----
-
------BEGIN RSA PRIVATE KEY-----
-MIIBOgIBAAJBAK3nI4nuDYe3nDJES5WBc90igEstxWC4/h4YY+/ciYki35U8ets9
-mgaoCNYp/e9BCZHtvK2Y+fYokGJv5+cMTQsCAwEAAQJBAIHpvXvqEcOEoDRRHuIG
-fkcB4jPHcr9KE9TpxabH6xs9beN6OJnkePXAHwaz5MnUgSnbpOKq+cw8miKjXwe/
-zVECIQDVLwncT2lRmXarEYHzb+q/0uaSvKhWKKt3kJasLNTrAwIhANDUc/ghut29
-p3jJYjurzUKuG774/5eLjPLsxPPIZzNZAiA/10hSq41UnGqHLEUIS9m2/EeEZe7b
-bm567dfRU9OnVQIgDo8ROrZXSchEGbaog5J5r/Fle83uO8l93R3GqVxKXZkCIFfk
-IPD5PIYQAyyod3hyKKza7ZP4CGY4oOfZetbkSGGG
------END RSA PRIVATE KEY-----
diff --git a/crypto/openssl/crypto/pkcs7/infokey.pem b/crypto/openssl/crypto/pkcs7/infokey.pem
deleted file mode 100644
index 1e2acc954d2a..000000000000
--- a/crypto/openssl/crypto/pkcs7/infokey.pem
+++ /dev/null
@@ -1,9 +0,0 @@
------BEGIN RSA PRIVATE KEY-----
-MIIBOgIBAAJBAK3nI4nuDYe3nDJES5WBc90igEstxWC4/h4YY+/ciYki35U8ets9
-mgaoCNYp/e9BCZHtvK2Y+fYokGJv5+cMTQsCAwEAAQJBAIHpvXvqEcOEoDRRHuIG
-fkcB4jPHcr9KE9TpxabH6xs9beN6OJnkePXAHwaz5MnUgSnbpOKq+cw8miKjXwe/
-zVECIQDVLwncT2lRmXarEYHzb+q/0uaSvKhWKKt3kJasLNTrAwIhANDUc/ghut29
-p3jJYjurzUKuG774/5eLjPLsxPPIZzNZAiA/10hSq41UnGqHLEUIS9m2/EeEZe7b
-bm567dfRU9OnVQIgDo8ROrZXSchEGbaog5J5r/Fle83uO8l93R3GqVxKXZkCIFfk
-IPD5PIYQAyyod3hyKKza7ZP4CGY4oOfZetbkSGGG
------END RSA PRIVATE KEY-----
diff --git a/crypto/openssl/crypto/pkcs7/p7/a1 b/crypto/openssl/crypto/pkcs7/p7/a1
deleted file mode 100644
index 56ca94376265..000000000000
--- a/crypto/openssl/crypto/pkcs7/p7/a1
+++ /dev/null
@@ -1,2 +0,0 @@
-j,H>_æá_­DôzEîLœ	VJ³ß觬¤””E3ûáYäx%_Àk
-3ê)DLScñ8%ôM
\ No newline at end of file
diff --git a/crypto/openssl/crypto/pkcs7/p7/a2 b/crypto/openssl/crypto/pkcs7/p7/a2
deleted file mode 100644
index 23d8fb5e93b9..000000000000
--- a/crypto/openssl/crypto/pkcs7/p7/a2
+++ /dev/null
@@ -1 +0,0 @@
-k~@a”,NâM͹¼	
<O( KP—騠¤K²>­×U¿o_½
BqrmÎ?Ù t?t÷�Ï�éId2‰Š
\ No newline at end of file
diff --git a/crypto/openssl/crypto/pkcs7/p7/cert.p7c b/crypto/openssl/crypto/pkcs7/p7/cert.p7c
deleted file mode 100644
index 2b75ec05f7d8..000000000000
--- a/crypto/openssl/crypto/pkcs7/p7/cert.p7c
+++ /dev/null
diff --git a/crypto/openssl/crypto/pkcs7/p7/smime.p7m b/crypto/openssl/crypto/pkcs7/p7/smime.p7m
deleted file mode 100644
index 2b6e6f82ba3f..000000000000
--- a/crypto/openssl/crypto/pkcs7/p7/smime.p7m
+++ /dev/null
diff --git a/crypto/openssl/crypto/pkcs7/p7/smime.p7s b/crypto/openssl/crypto/pkcs7/p7/smime.p7s
deleted file mode 100644
index 2b5d4fb0e3b6..000000000000
--- a/crypto/openssl/crypto/pkcs7/p7/smime.p7s
+++ /dev/null
diff --git a/crypto/openssl/crypto/pkcs7/pk7_asn1.c b/crypto/openssl/crypto/pkcs7/pk7_asn1.c
deleted file mode 100644
index 77931feeb417..000000000000
--- a/crypto/openssl/crypto/pkcs7/pk7_asn1.c
+++ /dev/null
@@ -1,214 +0,0 @@
-/* pk7_asn.c */
-/* Written by Dr Stephen N Henson (shenson@bigfoot.com) for the OpenSSL
- * project 2000.
- */
-/* ====================================================================
- * Copyright (c) 2000 The OpenSSL Project.  All rights reserved.
- *
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions
- * are met:
- *
- * 1. Redistributions of source code must retain the above copyright
- *    notice, this list of conditions and the following disclaimer. 
- *
- * 2. Redistributions in binary form must reproduce the above copyright
- *    notice, this list of conditions and the following disclaimer in
- *    the documentation and/or other materials provided with the
- *    distribution.
- *
- * 3. All advertising materials mentioning features or use of this
- *    software must display the following acknowledgment:
- *    "This product includes software developed by the OpenSSL Project
- *    for use in the OpenSSL Toolkit. (http://www.OpenSSL.org/)"
- *
- * 4. The names "OpenSSL Toolkit" and "OpenSSL Project" must not be used to
- *    endorse or promote products derived from this software without
- *    prior written permission. For written permission, please contact
- *    licensing@OpenSSL.org.
- *
- * 5. Products derived from this software may not be called "OpenSSL"
- *    nor may "OpenSSL" appear in their names without prior written
- *    permission of the OpenSSL Project.
- *
- * 6. Redistributions of any form whatsoever must retain the following
- *    acknowledgment:
- *    "This product includes software developed by the OpenSSL Project
- *    for use in the OpenSSL Toolkit (http://www.OpenSSL.org/)"
- *
- * THIS SOFTWARE IS PROVIDED BY THE OpenSSL PROJECT ``AS IS'' AND ANY
- * EXPRESSED OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
- * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR
- * PURPOSE ARE DISCLAIMED.  IN NO EVENT SHALL THE OpenSSL PROJECT OR
- * ITS CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
- * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
- * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
- * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
- * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
- * STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
- * ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED
- * OF THE POSSIBILITY OF SUCH DAMAGE.
- * ====================================================================
- *
- * This product includes cryptographic software written by Eric Young
- * (eay@cryptsoft.com).  This product includes software written by Tim
- * Hudson (tjh@cryptsoft.com).
- *
- */
-
-#include <stdio.h>
-#include "cryptlib.h"
-#include <openssl/asn1t.h>
-#include <openssl/pkcs7.h>
-#include <openssl/x509.h>
-
-/* PKCS#7 ASN1 module */
-
-/* This is the ANY DEFINED BY table for the top level PKCS#7 structure */
-
-ASN1_ADB_TEMPLATE(p7default) = ASN1_EXP_OPT(PKCS7, d.other, ASN1_ANY, 0);
-
-ASN1_ADB(PKCS7) = {
-	ADB_ENTRY(NID_pkcs7_data, ASN1_NDEF_EXP_OPT(PKCS7, d.data, ASN1_OCTET_STRING_NDEF, 0)),
-	ADB_ENTRY(NID_pkcs7_signed, ASN1_NDEF_EXP_OPT(PKCS7, d.sign, PKCS7_SIGNED, 0)),
-	ADB_ENTRY(NID_pkcs7_enveloped, ASN1_NDEF_EXP_OPT(PKCS7, d.enveloped, PKCS7_ENVELOPE, 0)),
-	ADB_ENTRY(NID_pkcs7_signedAndEnveloped, ASN1_NDEF_EXP_OPT(PKCS7, d.signed_and_enveloped, PKCS7_SIGN_ENVELOPE, 0)),
-	ADB_ENTRY(NID_pkcs7_digest, ASN1_NDEF_EXP_OPT(PKCS7, d.digest, PKCS7_DIGEST, 0)),
-	ADB_ENTRY(NID_pkcs7_encrypted, ASN1_NDEF_EXP_OPT(PKCS7, d.encrypted, PKCS7_ENCRYPT, 0))
-} ASN1_ADB_END(PKCS7, 0, type, 0, &p7default_tt, NULL);
-
-ASN1_NDEF_SEQUENCE(PKCS7) = {
-	ASN1_SIMPLE(PKCS7, type, ASN1_OBJECT),
-	ASN1_ADB_OBJECT(PKCS7)
-}ASN1_NDEF_SEQUENCE_END(PKCS7)
-
-IMPLEMENT_ASN1_FUNCTIONS(PKCS7)
-IMPLEMENT_ASN1_NDEF_FUNCTION(PKCS7)
-IMPLEMENT_ASN1_DUP_FUNCTION(PKCS7)
-
-ASN1_NDEF_SEQUENCE(PKCS7_SIGNED) = {
-	ASN1_SIMPLE(PKCS7_SIGNED, version, ASN1_INTEGER),
-	ASN1_SET_OF(PKCS7_SIGNED, md_algs, X509_ALGOR),
-	ASN1_SIMPLE(PKCS7_SIGNED, contents, PKCS7),
-	ASN1_IMP_SEQUENCE_OF_OPT(PKCS7_SIGNED, cert, X509, 0),
-	ASN1_IMP_SET_OF_OPT(PKCS7_SIGNED, crl, X509_CRL, 1),
-	ASN1_SET_OF(PKCS7_SIGNED, signer_info, PKCS7_SIGNER_INFO)
-} ASN1_NDEF_SEQUENCE_END(PKCS7_SIGNED)
-
-IMPLEMENT_ASN1_FUNCTIONS(PKCS7_SIGNED)
-
-/* Minor tweak to operation: free up EVP_PKEY */
-static int si_cb(int operation, ASN1_VALUE **pval, const ASN1_ITEM *it)
-{
-	if(operation == ASN1_OP_FREE_POST) {
-		PKCS7_SIGNER_INFO *si = (PKCS7_SIGNER_INFO *)*pval;
-		EVP_PKEY_free(si->pkey);
-	}
-	return 1;
-}
-
-ASN1_SEQUENCE_cb(PKCS7_SIGNER_INFO, si_cb) = {
-	ASN1_SIMPLE(PKCS7_SIGNER_INFO, version, ASN1_INTEGER),
-	ASN1_SIMPLE(PKCS7_SIGNER_INFO, issuer_and_serial, PKCS7_ISSUER_AND_SERIAL),
-	ASN1_SIMPLE(PKCS7_SIGNER_INFO, digest_alg, X509_ALGOR),
-	/* NB this should be a SET OF but we use a SEQUENCE OF so the
-	 * original order * is retained when the structure is reencoded.
-	 * Since the attributes are implicitly tagged this will not affect
-	 * the encoding.
-	 */
-	ASN1_IMP_SEQUENCE_OF_OPT(PKCS7_SIGNER_INFO, auth_attr, X509_ATTRIBUTE, 0),
-	ASN1_SIMPLE(PKCS7_SIGNER_INFO, digest_enc_alg, X509_ALGOR),
-	ASN1_SIMPLE(PKCS7_SIGNER_INFO, enc_digest, ASN1_OCTET_STRING),
-	ASN1_IMP_SET_OF_OPT(PKCS7_SIGNER_INFO, unauth_attr, X509_ATTRIBUTE, 1)
-} ASN1_SEQUENCE_END_cb(PKCS7_SIGNER_INFO, PKCS7_SIGNER_INFO)
-
-IMPLEMENT_ASN1_FUNCTIONS(PKCS7_SIGNER_INFO)
-
-ASN1_SEQUENCE(PKCS7_ISSUER_AND_SERIAL) = {
-	ASN1_SIMPLE(PKCS7_ISSUER_AND_SERIAL, issuer, X509_NAME),
-	ASN1_SIMPLE(PKCS7_ISSUER_AND_SERIAL, serial, ASN1_INTEGER)
-} ASN1_SEQUENCE_END(PKCS7_ISSUER_AND_SERIAL)
-
-IMPLEMENT_ASN1_FUNCTIONS(PKCS7_ISSUER_AND_SERIAL)
-
-ASN1_NDEF_SEQUENCE(PKCS7_ENVELOPE) = {
-	ASN1_SIMPLE(PKCS7_ENVELOPE, version, ASN1_INTEGER),
-	ASN1_SET_OF(PKCS7_ENVELOPE, recipientinfo, PKCS7_RECIP_INFO),
-	ASN1_SIMPLE(PKCS7_ENVELOPE, enc_data, PKCS7_ENC_CONTENT)
-} ASN1_NDEF_SEQUENCE_END(PKCS7_ENVELOPE)
-
-IMPLEMENT_ASN1_FUNCTIONS(PKCS7_ENVELOPE)
-
-/* Minor tweak to operation: free up X509 */
-static int ri_cb(int operation, ASN1_VALUE **pval, const ASN1_ITEM *it)
-{
-	if(operation == ASN1_OP_FREE_POST) {
-		PKCS7_RECIP_INFO *ri = (PKCS7_RECIP_INFO *)*pval;
-		X509_free(ri->cert);
-	}
-	return 1;
-}
-
-ASN1_SEQUENCE_cb(PKCS7_RECIP_INFO, ri_cb) = {
-	ASN1_SIMPLE(PKCS7_RECIP_INFO, version, ASN1_INTEGER),
-	ASN1_SIMPLE(PKCS7_RECIP_INFO, issuer_and_serial, PKCS7_ISSUER_AND_SERIAL),
-	ASN1_SIMPLE(PKCS7_RECIP_INFO, key_enc_algor, X509_ALGOR),
-	ASN1_SIMPLE(PKCS7_RECIP_INFO, enc_key, ASN1_OCTET_STRING)
-} ASN1_SEQUENCE_END_cb(PKCS7_RECIP_INFO, PKCS7_RECIP_INFO)
-
-IMPLEMENT_ASN1_FUNCTIONS(PKCS7_RECIP_INFO)
-
-ASN1_NDEF_SEQUENCE(PKCS7_ENC_CONTENT) = {
-	ASN1_SIMPLE(PKCS7_ENC_CONTENT, content_type, ASN1_OBJECT),
-	ASN1_SIMPLE(PKCS7_ENC_CONTENT, algorithm, X509_ALGOR),
-	ASN1_IMP_OPT(PKCS7_ENC_CONTENT, enc_data, ASN1_OCTET_STRING, 0)
-} ASN1_NDEF_SEQUENCE_END(PKCS7_ENC_CONTENT)
-
-IMPLEMENT_ASN1_FUNCTIONS(PKCS7_ENC_CONTENT)
-
-ASN1_NDEF_SEQUENCE(PKCS7_SIGN_ENVELOPE) = {
-	ASN1_SIMPLE(PKCS7_SIGN_ENVELOPE, version, ASN1_INTEGER),
-	ASN1_SET_OF(PKCS7_SIGN_ENVELOPE, recipientinfo, PKCS7_RECIP_INFO),
-	ASN1_SET_OF(PKCS7_SIGN_ENVELOPE, md_algs, X509_ALGOR),
-	ASN1_SIMPLE(PKCS7_SIGN_ENVELOPE, enc_data, PKCS7_ENC_CONTENT),
-	ASN1_IMP_SET_OF_OPT(PKCS7_SIGN_ENVELOPE, cert, X509, 0),
-	ASN1_IMP_SET_OF_OPT(PKCS7_SIGN_ENVELOPE, crl, X509_CRL, 1),
-	ASN1_SET_OF(PKCS7_SIGN_ENVELOPE, signer_info, PKCS7_SIGNER_INFO)
-} ASN1_NDEF_SEQUENCE_END(PKCS7_SIGN_ENVELOPE)
-
-IMPLEMENT_ASN1_FUNCTIONS(PKCS7_SIGN_ENVELOPE)
-
-ASN1_NDEF_SEQUENCE(PKCS7_ENCRYPT) = {
-	ASN1_SIMPLE(PKCS7_ENCRYPT, version, ASN1_INTEGER),
-	ASN1_SIMPLE(PKCS7_ENCRYPT, enc_data, PKCS7_ENC_CONTENT)
-} ASN1_NDEF_SEQUENCE_END(PKCS7_ENCRYPT)
-
-IMPLEMENT_ASN1_FUNCTIONS(PKCS7_ENCRYPT)
-
-ASN1_NDEF_SEQUENCE(PKCS7_DIGEST) = {
-	ASN1_SIMPLE(PKCS7_DIGEST, version, ASN1_INTEGER),
-	ASN1_SIMPLE(PKCS7_DIGEST, md, X509_ALGOR),
-	ASN1_SIMPLE(PKCS7_DIGEST, contents, PKCS7),
-	ASN1_SIMPLE(PKCS7_DIGEST, digest, ASN1_OCTET_STRING)
-} ASN1_NDEF_SEQUENCE_END(PKCS7_DIGEST)
-
-IMPLEMENT_ASN1_FUNCTIONS(PKCS7_DIGEST)
-
-/* Specials for authenticated attributes */
-
-/* When signing attributes we want to reorder them to match the sorted
- * encoding.
- */
-
-ASN1_ITEM_TEMPLATE(PKCS7_ATTR_SIGN) = 
-	ASN1_EX_TEMPLATE_TYPE(ASN1_TFLG_SET_ORDER, 0, PKCS7_ATTRIBUTES, X509_ATTRIBUTE)
-ASN1_ITEM_TEMPLATE_END(PKCS7_ATTR_SIGN)
-
-/* When verifying attributes we need to use the received order. So 
- * we use SEQUENCE OF and tag it to SET OF
- */
-
-ASN1_ITEM_TEMPLATE(PKCS7_ATTR_VERIFY) = 
-	ASN1_EX_TEMPLATE_TYPE(ASN1_TFLG_SEQUENCE_OF | ASN1_TFLG_IMPTAG | ASN1_TFLG_UNIVERSAL,
-				V_ASN1_SET, PKCS7_ATTRIBUTES, X509_ATTRIBUTE)
-ASN1_ITEM_TEMPLATE_END(PKCS7_ATTR_VERIFY)
diff --git a/crypto/openssl/crypto/pkcs7/pk7_attr.c b/crypto/openssl/crypto/pkcs7/pk7_attr.c
deleted file mode 100644
index 735c8800e102..000000000000
--- a/crypto/openssl/crypto/pkcs7/pk7_attr.c
+++ /dev/null
@@ -1,141 +0,0 @@
-/* pk7_attr.c */
-/* Written by Dr Stephen N Henson (shenson@bigfoot.com) for the OpenSSL
- * project 2001.
- */
-/* ====================================================================
- * Copyright (c) 2001-2004 The OpenSSL Project.  All rights reserved.
- *
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions
- * are met:
- *
- * 1. Redistributions of source code must retain the above copyright
- *    notice, this list of conditions and the following disclaimer. 
- *
- * 2. Redistributions in binary form must reproduce the above copyright
- *    notice, this list of conditions and the following disclaimer in
- *    the documentation and/or other materials provided with the
- *    distribution.
- *
- * 3. All advertising materials mentioning features or use of this
- *    software must display the following acknowledgment:
- *    "This product includes software developed by the OpenSSL Project
- *    for use in the OpenSSL Toolkit. (http://www.OpenSSL.org/)"
- *
- * 4. The names "OpenSSL Toolkit" and "OpenSSL Project" must not be used to
- *    endorse or promote products derived from this software without
- *    prior written permission. For written permission, please contact
- *    licensing@OpenSSL.org.
- *
- * 5. Products derived from this software may not be called "OpenSSL"
- *    nor may "OpenSSL" appear in their names without prior written
- *    permission of the OpenSSL Project.
- *
- * 6. Redistributions of any form whatsoever must retain the following
- *    acknowledgment:
- *    "This product includes software developed by the OpenSSL Project
- *    for use in the OpenSSL Toolkit (http://www.OpenSSL.org/)"
- *
- * THIS SOFTWARE IS PROVIDED BY THE OpenSSL PROJECT ``AS IS'' AND ANY
- * EXPRESSED OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
- * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR
- * PURPOSE ARE DISCLAIMED.  IN NO EVENT SHALL THE OpenSSL PROJECT OR
- * ITS CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
- * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
- * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
- * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
- * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
- * STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
- * ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED
- * OF THE POSSIBILITY OF SUCH DAMAGE.
- * ====================================================================
- *
- * This product includes cryptographic software written by Eric Young
- * (eay@cryptsoft.com).  This product includes software written by Tim
- * Hudson (tjh@cryptsoft.com).
- *
- */
-
-#include <stdio.h>
-#include <stdlib.h>
-#include <openssl/bio.h>
-#include <openssl/asn1.h>
-#include <openssl/pem.h>
-#include <openssl/pkcs7.h>
-#include <openssl/x509.h>
-#include <openssl/err.h>
-
-int PKCS7_add_attrib_smimecap(PKCS7_SIGNER_INFO *si, STACK_OF(X509_ALGOR) *cap)
-{
-	ASN1_STRING *seq;
-	unsigned char *p, *pp;
-	int len;
-	len=i2d_ASN1_SET_OF_X509_ALGOR(cap,NULL,i2d_X509_ALGOR,
-				       V_ASN1_SEQUENCE,V_ASN1_UNIVERSAL,
-				       IS_SEQUENCE);
-	if(!(pp=(unsigned char *)OPENSSL_malloc(len))) {
-		PKCS7err(PKCS7_F_PKCS7_ADD_ATTRIB_SMIMECAP,ERR_R_MALLOC_FAILURE);
-		return 0;
-	}
-	p=pp;
-	i2d_ASN1_SET_OF_X509_ALGOR(cap,&p,i2d_X509_ALGOR, V_ASN1_SEQUENCE,
-				   V_ASN1_UNIVERSAL, IS_SEQUENCE);
-	if(!(seq = ASN1_STRING_new())) {
-		PKCS7err(PKCS7_F_PKCS7_ADD_ATTRIB_SMIMECAP,ERR_R_MALLOC_FAILURE);
-		return 0;
-	}
-	if(!ASN1_STRING_set (seq, pp, len)) {
-		PKCS7err(PKCS7_F_PKCS7_ADD_ATTRIB_SMIMECAP,ERR_R_MALLOC_FAILURE);
-		return 0;
-	}
-	OPENSSL_free (pp);
-        return PKCS7_add_signed_attribute(si, NID_SMIMECapabilities,
-							V_ASN1_SEQUENCE, seq);
-}
-
-STACK_OF(X509_ALGOR) *PKCS7_get_smimecap(PKCS7_SIGNER_INFO *si)
-	{
-	ASN1_TYPE *cap;
-	const unsigned char *p;
-
-	cap = PKCS7_get_signed_attribute(si, NID_SMIMECapabilities);
-	if (!cap || (cap->type != V_ASN1_SEQUENCE))
-		return NULL;
-	p = cap->value.sequence->data;
-	return d2i_ASN1_SET_OF_X509_ALGOR(NULL, &p,
-					  cap->value.sequence->length,
-					  d2i_X509_ALGOR, X509_ALGOR_free,
-					  V_ASN1_SEQUENCE, V_ASN1_UNIVERSAL);
-	}
-
-/* Basic smime-capabilities OID and optional integer arg */
-int PKCS7_simple_smimecap(STACK_OF(X509_ALGOR) *sk, int nid, int arg)
-{
-	X509_ALGOR *alg;
-
-	if(!(alg = X509_ALGOR_new())) {
-		PKCS7err(PKCS7_F_PKCS7_SIMPLE_SMIMECAP,ERR_R_MALLOC_FAILURE);
-		return 0;
-	}
-	ASN1_OBJECT_free(alg->algorithm);
-	alg->algorithm = OBJ_nid2obj (nid);
-	if (arg > 0) {
-		ASN1_INTEGER *nbit;
-		if(!(alg->parameter = ASN1_TYPE_new())) {
-			PKCS7err(PKCS7_F_PKCS7_SIMPLE_SMIMECAP,ERR_R_MALLOC_FAILURE);
-			return 0;
-		}
-		if(!(nbit = ASN1_INTEGER_new())) {
-			PKCS7err(PKCS7_F_PKCS7_SIMPLE_SMIMECAP,ERR_R_MALLOC_FAILURE);
-			return 0;
-		}
-		if(!ASN1_INTEGER_set (nbit, arg)) {
-			PKCS7err(PKCS7_F_PKCS7_SIMPLE_SMIMECAP,ERR_R_MALLOC_FAILURE);
-			return 0;
-		}
-		alg->parameter->value.integer = nbit;
-		alg->parameter->type = V_ASN1_INTEGER;
-	}
-	sk_X509_ALGOR_push (sk, alg);
-	return 1;
-}
diff --git a/crypto/openssl/crypto/pkcs7/pk7_dgst.c b/crypto/openssl/crypto/pkcs7/pk7_dgst.c
deleted file mode 100644
index 90edfa5001fd..000000000000
--- a/crypto/openssl/crypto/pkcs7/pk7_dgst.c
+++ /dev/null
@@ -1,66 +0,0 @@
-/* crypto/pkcs7/pk7_dgst.c */
-/* Copyright (C) 1995-1998 Eric Young (eay@cryptsoft.com)
- * All rights reserved.
- *
- * This package is an SSL implementation written
- * by Eric Young (eay@cryptsoft.com).
- * The implementation was written so as to conform with Netscapes SSL.
- * 
- * This library is free for commercial and non-commercial use as long as
- * the following conditions are aheared to.  The following conditions
- * apply to all code found in this distribution, be it the RC4, RSA,
- * lhash, DES, etc., code; not just the SSL code.  The SSL documentation
- * included with this distribution is covered by the same copyright terms
- * except that the holder is Tim Hudson (tjh@cryptsoft.com).
- * 
- * Copyright remains Eric Young's, and as such any Copyright notices in
- * the code are not to be removed.
- * If this package is used in a product, Eric Young should be given attribution
- * as the author of the parts of the library used.
- * This can be in the form of a textual message at program startup or
- * in documentation (online or textual) provided with the package.
- * 
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions
- * are met:
- * 1. Redistributions of source code must retain the copyright
- *    notice, this list of conditions and the following disclaimer.
- * 2. Redistributions in binary form must reproduce the above copyright
- *    notice, this list of conditions and the following disclaimer in the
- *    documentation and/or other materials provided with the distribution.
- * 3. All advertising materials mentioning features or use of this software
- *    must display the following acknowledgement:
- *    "This product includes cryptographic software written by
- *     Eric Young (eay@cryptsoft.com)"
- *    The word 'cryptographic' can be left out if the rouines from the library
- *    being used are not cryptographic related :-).
- * 4. If you include any Windows specific code (or a derivative thereof) from 
- *    the apps directory (application code) you must include an acknowledgement:
- *    "This product includes software written by Tim Hudson (tjh@cryptsoft.com)"
- * 
- * THIS SOFTWARE IS PROVIDED BY ERIC YOUNG ``AS IS'' AND
- * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
- * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
- * ARE DISCLAIMED.  IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE
- * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
- * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
- * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
- * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
- * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
- * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
- * SUCH DAMAGE.
- * 
- * The licence and distribution terms for any publically available version or
- * derivative of this code cannot be changed.  i.e. this code cannot simply be
- * copied and put under another distribution licence
- * [including the GNU Public Licence.]
- */
-
-#include <stdio.h>
-#include "cryptlib.h"
-#include <openssl/evp.h>
-#include <openssl/rand.h>
-#include <openssl/objects.h>
-#include <openssl/x509.h>
-#include <openssl/pkcs7.h>
-
diff --git a/crypto/openssl/crypto/pkcs7/pk7_doit.c b/crypto/openssl/crypto/pkcs7/pk7_doit.c
deleted file mode 100644
index a03d7ebedf19..000000000000
--- a/crypto/openssl/crypto/pkcs7/pk7_doit.c
+++ /dev/null
@@ -1,1147 +0,0 @@
-/* crypto/pkcs7/pk7_doit.c */
-/* Copyright (C) 1995-1998 Eric Young (eay@cryptsoft.com)
- * All rights reserved.
- *
- * This package is an SSL implementation written
- * by Eric Young (eay@cryptsoft.com).
- * The implementation was written so as to conform with Netscapes SSL.
- * 
- * This library is free for commercial and non-commercial use as long as
- * the following conditions are aheared to.  The following conditions
- * apply to all code found in this distribution, be it the RC4, RSA,
- * lhash, DES, etc., code; not just the SSL code.  The SSL documentation
- * included with this distribution is covered by the same copyright terms
- * except that the holder is Tim Hudson (tjh@cryptsoft.com).
- * 
- * Copyright remains Eric Young's, and as such any Copyright notices in
- * the code are not to be removed.
- * If this package is used in a product, Eric Young should be given attribution
- * as the author of the parts of the library used.
- * This can be in the form of a textual message at program startup or
- * in documentation (online or textual) provided with the package.
- * 
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions
- * are met:
- * 1. Redistributions of source code must retain the copyright
- *    notice, this list of conditions and the following disclaimer.
- * 2. Redistributions in binary form must reproduce the above copyright
- *    notice, this list of conditions and the following disclaimer in the
- *    documentation and/or other materials provided with the distribution.
- * 3. All advertising materials mentioning features or use of this software
- *    must display the following acknowledgement:
- *    "This product includes cryptographic software written by
- *     Eric Young (eay@cryptsoft.com)"
- *    The word 'cryptographic' can be left out if the rouines from the library
- *    being used are not cryptographic related :-).
- * 4. If you include any Windows specific code (or a derivative thereof) from 
- *    the apps directory (application code) you must include an acknowledgement:
- *    "This product includes software written by Tim Hudson (tjh@cryptsoft.com)"
- * 
- * THIS SOFTWARE IS PROVIDED BY ERIC YOUNG ``AS IS'' AND
- * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
- * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
- * ARE DISCLAIMED.  IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE
- * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
- * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
- * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
- * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
- * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
- * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
- * SUCH DAMAGE.
- * 
- * The licence and distribution terms for any publically available version or
- * derivative of this code cannot be changed.  i.e. this code cannot simply be
- * copied and put under another distribution licence
- * [including the GNU Public Licence.]
- */
-
-#include <stdio.h>
-#include "cryptlib.h"
-#include <openssl/rand.h>
-#include <openssl/objects.h>
-#include <openssl/x509.h>
-#include <openssl/x509v3.h>
-#include <openssl/err.h>
-
-static int add_attribute(STACK_OF(X509_ATTRIBUTE) **sk, int nid, int atrtype,
-			 void *value);
-static ASN1_TYPE *get_attribute(STACK_OF(X509_ATTRIBUTE) *sk, int nid);
-
-static int PKCS7_type_is_other(PKCS7* p7)
-	{
-	int isOther=1;
-	
-	int nid=OBJ_obj2nid(p7->type);
-
-	switch( nid )
-		{
-	case NID_pkcs7_data:
-	case NID_pkcs7_signed:
-	case NID_pkcs7_enveloped:
-	case NID_pkcs7_signedAndEnveloped:
-	case NID_pkcs7_digest:
-	case NID_pkcs7_encrypted:
-		isOther=0;
-		break;
-	default:
-		isOther=1;
-		}
-
-	return isOther;
-
-	}
-
-static ASN1_OCTET_STRING *PKCS7_get_octet_string(PKCS7 *p7)
-	{
-	if ( PKCS7_type_is_data(p7))
-		return p7->d.data;
-	if ( PKCS7_type_is_other(p7) && p7->d.other
-		&& (p7->d.other->type == V_ASN1_OCTET_STRING))
-		return p7->d.other->value.octet_string;
-	return NULL;
-	}
-
-static int PKCS7_bio_add_digest(BIO **pbio, X509_ALGOR *alg)
-	{
-	BIO *btmp;
-	const EVP_MD *md;
-	if ((btmp=BIO_new(BIO_f_md())) == NULL)
-		{
-		PKCS7err(PKCS7_F_PKCS7_BIO_ADD_DIGEST,ERR_R_BIO_LIB);
-		goto err;
-		}
-
-	md=EVP_get_digestbyobj(alg->algorithm);
-	if (md == NULL)
-		{
-		PKCS7err(PKCS7_F_PKCS7_BIO_ADD_DIGEST,PKCS7_R_UNKNOWN_DIGEST_TYPE);
-		goto err;
-		}
-
-	BIO_set_md(btmp,md);
-	if (*pbio == NULL)
-		*pbio=btmp;
-	else if (!BIO_push(*pbio,btmp))
-		{
-		PKCS7err(PKCS7_F_PKCS7_BIO_ADD_DIGEST,ERR_R_BIO_LIB);
-		goto err;
-		}
-	btmp=NULL;
-
-	return 1;
-
-	err:
-	if (btmp)
-		BIO_free(btmp);
-	return 0;
-
-	}
-
-BIO *PKCS7_dataInit(PKCS7 *p7, BIO *bio)
-	{
-	int i;
-	BIO *out=NULL,*btmp=NULL;
-	X509_ALGOR *xa = NULL;
-	const EVP_CIPHER *evp_cipher=NULL;
-	STACK_OF(X509_ALGOR) *md_sk=NULL;
-	STACK_OF(PKCS7_RECIP_INFO) *rsk=NULL;
-	X509_ALGOR *xalg=NULL;
-	PKCS7_RECIP_INFO *ri=NULL;
-	EVP_PKEY *pkey;
-	ASN1_OCTET_STRING *os=NULL;
-
-	i=OBJ_obj2nid(p7->type);
-	p7->state=PKCS7_S_HEADER;
-
-	switch (i)
-		{
-	case NID_pkcs7_signed:
-		md_sk=p7->d.sign->md_algs;
-		os = PKCS7_get_octet_string(p7->d.sign->contents);
-		break;
-	case NID_pkcs7_signedAndEnveloped:
-		rsk=p7->d.signed_and_enveloped->recipientinfo;
-		md_sk=p7->d.signed_and_enveloped->md_algs;
-		xalg=p7->d.signed_and_enveloped->enc_data->algorithm;
-		evp_cipher=p7->d.signed_and_enveloped->enc_data->cipher;
-		if (evp_cipher == NULL)
-			{
-			PKCS7err(PKCS7_F_PKCS7_DATAINIT,
-						PKCS7_R_CIPHER_NOT_INITIALIZED);
-			goto err;
-			}
-		break;
-	case NID_pkcs7_enveloped:
-		rsk=p7->d.enveloped->recipientinfo;
-		xalg=p7->d.enveloped->enc_data->algorithm;
-		evp_cipher=p7->d.enveloped->enc_data->cipher;
-		if (evp_cipher == NULL)
-			{
-			PKCS7err(PKCS7_F_PKCS7_DATAINIT,
-						PKCS7_R_CIPHER_NOT_INITIALIZED);
-			goto err;
-			}
-		break;
-	case NID_pkcs7_digest:
-		xa = p7->d.digest->md;
-		os = PKCS7_get_octet_string(p7->d.digest->contents);
-		break;
-	default:
-		PKCS7err(PKCS7_F_PKCS7_DATAINIT,PKCS7_R_UNSUPPORTED_CONTENT_TYPE);
-	        goto err;
-		}
-
-	for (i=0; i<sk_X509_ALGOR_num(md_sk); i++)
-		if (!PKCS7_bio_add_digest(&out, sk_X509_ALGOR_value(md_sk, i)))
-			goto err;
-
-	if (xa && !PKCS7_bio_add_digest(&out, xa))
-			goto err;
-
-	if (evp_cipher != NULL)
-		{
-		unsigned char key[EVP_MAX_KEY_LENGTH];
-		unsigned char iv[EVP_MAX_IV_LENGTH];
-		int keylen,ivlen;
-		int jj,max;
-		unsigned char *tmp;
-		EVP_CIPHER_CTX *ctx;
-
-		if ((btmp=BIO_new(BIO_f_cipher())) == NULL)
-			{
-			PKCS7err(PKCS7_F_PKCS7_DATAINIT,ERR_R_BIO_LIB);
-			goto err;
-			}
-		BIO_get_cipher_ctx(btmp, &ctx);
-		keylen=EVP_CIPHER_key_length(evp_cipher);
-		ivlen=EVP_CIPHER_iv_length(evp_cipher);
-		xalg->algorithm = OBJ_nid2obj(EVP_CIPHER_type(evp_cipher));
-		if (ivlen > 0)
-			if (RAND_pseudo_bytes(iv,ivlen) <= 0)
-				goto err;
-		if (EVP_CipherInit_ex(ctx, evp_cipher, NULL, NULL, NULL, 1)<=0)
-			goto err;
-		if (EVP_CIPHER_CTX_rand_key(ctx, key) <= 0)
-			goto err;
-		if (EVP_CipherInit_ex(ctx, NULL, NULL, key, iv, 1) <= 0)
-			goto err;
-
-		if (ivlen > 0) {
-			if (xalg->parameter == NULL) {
-				xalg->parameter = ASN1_TYPE_new();
-				if (xalg->parameter == NULL)
-					goto err;
-			}
-			if(EVP_CIPHER_param_to_asn1(ctx, xalg->parameter) < 0)
-			       goto err;
-		}
-
-		/* Lets do the pub key stuff :-) */
-		max=0;
-		for (i=0; i<sk_PKCS7_RECIP_INFO_num(rsk); i++)
-			{
-			ri=sk_PKCS7_RECIP_INFO_value(rsk,i);
-			if (ri->cert == NULL)
-				{
-				PKCS7err(PKCS7_F_PKCS7_DATAINIT,PKCS7_R_MISSING_CERIPEND_INFO);
-				goto err;
-				}
-			if ((pkey=X509_get_pubkey(ri->cert)) == NULL)
-				goto err;
-			jj=EVP_PKEY_size(pkey);
-			EVP_PKEY_free(pkey);
-			if (max < jj) max=jj;
-			}
-		if ((tmp=(unsigned char *)OPENSSL_malloc(max)) == NULL)
-			{
-			PKCS7err(PKCS7_F_PKCS7_DATAINIT,ERR_R_MALLOC_FAILURE);
-			goto err;
-			}
-		for (i=0; i<sk_PKCS7_RECIP_INFO_num(rsk); i++)
-			{
-			ri=sk_PKCS7_RECIP_INFO_value(rsk,i);
-			if ((pkey=X509_get_pubkey(ri->cert)) == NULL)
-				goto err;
-			jj=EVP_PKEY_encrypt(tmp,key,keylen,pkey);
-			EVP_PKEY_free(pkey);
-			if (jj <= 0)
-				{
-				PKCS7err(PKCS7_F_PKCS7_DATAINIT,ERR_R_EVP_LIB);
-				OPENSSL_free(tmp);
-				goto err;
-				}
-			if (!M_ASN1_OCTET_STRING_set(ri->enc_key,tmp,jj))
-				{
-				PKCS7err(PKCS7_F_PKCS7_DATAINIT,
-					ERR_R_MALLOC_FAILURE);
-				OPENSSL_free(tmp);
-				goto err;
-				}
-			}
-		OPENSSL_free(tmp);
-		OPENSSL_cleanse(key, keylen);
-
-		if (out == NULL)
-			out=btmp;
-		else
-			BIO_push(out,btmp);
-		btmp=NULL;
-		}
-
-	if (bio == NULL)
-		{
-		if (PKCS7_is_detached(p7))
-			bio=BIO_new(BIO_s_null());
-		else if (os && os->length > 0)
-			bio = BIO_new_mem_buf(os->data, os->length);
-		if(bio == NULL)
-			{
-			bio=BIO_new(BIO_s_mem());
-			if (bio == NULL)
-				goto err;
-			BIO_set_mem_eof_return(bio,0);
-			}
-		}
-	BIO_push(out,bio);
-	bio=NULL;
-	if (0)
-		{
-err:
-		if (out != NULL)
-			BIO_free_all(out);
-		if (btmp != NULL)
-			BIO_free_all(btmp);
-		out=NULL;
-		}
-	return(out);
-	}
-
-static int pkcs7_cmp_ri(PKCS7_RECIP_INFO *ri, X509 *pcert)
-	{
-	int ret;
-	ret = X509_NAME_cmp(ri->issuer_and_serial->issuer,
-				pcert->cert_info->issuer);
-	if (ret)
-		return ret;
-	return M_ASN1_INTEGER_cmp(pcert->cert_info->serialNumber,
-					ri->issuer_and_serial->serial);
-	}
-
-/* int */
-BIO *PKCS7_dataDecode(PKCS7 *p7, EVP_PKEY *pkey, BIO *in_bio, X509 *pcert)
-	{
-	int i,j;
-	BIO *out=NULL,*btmp=NULL,*etmp=NULL,*bio=NULL;
-	unsigned char *tmp=NULL;
-	X509_ALGOR *xa;
-	ASN1_OCTET_STRING *data_body=NULL;
-	const EVP_MD *evp_md;
-	const EVP_CIPHER *evp_cipher=NULL;
-	EVP_CIPHER_CTX *evp_ctx=NULL;
-	X509_ALGOR *enc_alg=NULL;
-	STACK_OF(X509_ALGOR) *md_sk=NULL;
-	STACK_OF(PKCS7_RECIP_INFO) *rsk=NULL;
-	X509_ALGOR *xalg=NULL;
-	PKCS7_RECIP_INFO *ri=NULL;
-
-	i=OBJ_obj2nid(p7->type);
-	p7->state=PKCS7_S_HEADER;
-
-	switch (i)
-		{
-	case NID_pkcs7_signed:
-		data_body=PKCS7_get_octet_string(p7->d.sign->contents);
-		md_sk=p7->d.sign->md_algs;
-		break;
-	case NID_pkcs7_signedAndEnveloped:
-		rsk=p7->d.signed_and_enveloped->recipientinfo;
-		md_sk=p7->d.signed_and_enveloped->md_algs;
-		data_body=p7->d.signed_and_enveloped->enc_data->enc_data;
-		enc_alg=p7->d.signed_and_enveloped->enc_data->algorithm;
-		evp_cipher=EVP_get_cipherbyobj(enc_alg->algorithm);
-		if (evp_cipher == NULL)
-			{
-			PKCS7err(PKCS7_F_PKCS7_DATADECODE,PKCS7_R_UNSUPPORTED_CIPHER_TYPE);
-			goto err;
-			}
-		xalg=p7->d.signed_and_enveloped->enc_data->algorithm;
-		break;
-	case NID_pkcs7_enveloped:
-		rsk=p7->d.enveloped->recipientinfo;
-		enc_alg=p7->d.enveloped->enc_data->algorithm;
-		data_body=p7->d.enveloped->enc_data->enc_data;
-		evp_cipher=EVP_get_cipherbyobj(enc_alg->algorithm);
-		if (evp_cipher == NULL)
-			{
-			PKCS7err(PKCS7_F_PKCS7_DATADECODE,PKCS7_R_UNSUPPORTED_CIPHER_TYPE);
-			goto err;
-			}
-		xalg=p7->d.enveloped->enc_data->algorithm;
-		break;
-	default:
-		PKCS7err(PKCS7_F_PKCS7_DATADECODE,PKCS7_R_UNSUPPORTED_CONTENT_TYPE);
-	        goto err;
-		}
-
-	/* We will be checking the signature */
-	if (md_sk != NULL)
-		{
-		for (i=0; i<sk_X509_ALGOR_num(md_sk); i++)
-			{
-			xa=sk_X509_ALGOR_value(md_sk,i);
-			if ((btmp=BIO_new(BIO_f_md())) == NULL)
-				{
-				PKCS7err(PKCS7_F_PKCS7_DATADECODE,ERR_R_BIO_LIB);
-				goto err;
-				}
-
-			j=OBJ_obj2nid(xa->algorithm);
-			evp_md=EVP_get_digestbynid(j);
-			if (evp_md == NULL)
-				{
-				PKCS7err(PKCS7_F_PKCS7_DATADECODE,PKCS7_R_UNKNOWN_DIGEST_TYPE);
-				goto err;
-				}
-
-			BIO_set_md(btmp,evp_md);
-			if (out == NULL)
-				out=btmp;
-			else
-				BIO_push(out,btmp);
-			btmp=NULL;
-			}
-		}
-
-	if (evp_cipher != NULL)
-		{
-#if 0
-		unsigned char key[EVP_MAX_KEY_LENGTH];
-		unsigned char iv[EVP_MAX_IV_LENGTH];
-		unsigned char *p;
-		int keylen,ivlen;
-		int max;
-		X509_OBJECT ret;
-#endif
-		int jj;
-
-		if ((etmp=BIO_new(BIO_f_cipher())) == NULL)
-			{
-			PKCS7err(PKCS7_F_PKCS7_DATADECODE,ERR_R_BIO_LIB);
-			goto err;
-			}
-
-		/* It was encrypted, we need to decrypt the secret key
-		 * with the private key */
-
-		/* Find the recipientInfo which matches the passed certificate
-		 * (if any)
-		 */
-
-		if (pcert) {
-			for (i=0; i<sk_PKCS7_RECIP_INFO_num(rsk); i++) {
-				ri=sk_PKCS7_RECIP_INFO_value(rsk,i);
-				if (!pkcs7_cmp_ri(ri, pcert))
-					break;
-				ri=NULL;
-			}
-			if (ri == NULL) {
-				PKCS7err(PKCS7_F_PKCS7_DATADECODE,
-				      PKCS7_R_NO_RECIPIENT_MATCHES_CERTIFICATE);
-				goto err;
-			}
-		}
-
-		jj=EVP_PKEY_size(pkey);
-		tmp=(unsigned char *)OPENSSL_malloc(jj+10);
-		if (tmp == NULL)
-			{
-			PKCS7err(PKCS7_F_PKCS7_DATADECODE,ERR_R_MALLOC_FAILURE);
-			goto err;
-			}
-
-		/* If we haven't got a certificate try each ri in turn */
-
-		if (pcert == NULL)
-			{
-			for (i=0; i<sk_PKCS7_RECIP_INFO_num(rsk); i++)
-				{
-				ri=sk_PKCS7_RECIP_INFO_value(rsk,i);
-				jj=EVP_PKEY_decrypt(tmp,
-					M_ASN1_STRING_data(ri->enc_key),
-					M_ASN1_STRING_length(ri->enc_key),
-						pkey);
-				if (jj > 0)
-					break;
-				ERR_clear_error();
-				ri = NULL;
-				}
-			if (ri == NULL)
-				{
-				PKCS7err(PKCS7_F_PKCS7_DATADECODE,
-				      PKCS7_R_NO_RECIPIENT_MATCHES_KEY);
-				goto err;
-				}
-			}
-		else
-			{
-			jj=EVP_PKEY_decrypt(tmp,
-				M_ASN1_STRING_data(ri->enc_key),
-				M_ASN1_STRING_length(ri->enc_key), pkey);
-			if (jj <= 0)
-				{
-				PKCS7err(PKCS7_F_PKCS7_DATADECODE,
-								ERR_R_EVP_LIB);
-				goto err;
-				}
-			}
-
-		evp_ctx=NULL;
-		BIO_get_cipher_ctx(etmp,&evp_ctx);
-		if (EVP_CipherInit_ex(evp_ctx,evp_cipher,NULL,NULL,NULL,0) <= 0)
-			goto err;
-		if (EVP_CIPHER_asn1_to_param(evp_ctx,enc_alg->parameter) < 0)
-			goto err;
-
-		if (jj != EVP_CIPHER_CTX_key_length(evp_ctx)) {
-			/* Some S/MIME clients don't use the same key
-			 * and effective key length. The key length is
-			 * determined by the size of the decrypted RSA key.
-			 */
-			if(!EVP_CIPHER_CTX_set_key_length(evp_ctx, jj))
-				{
-				PKCS7err(PKCS7_F_PKCS7_DATADECODE,
-					PKCS7_R_DECRYPTED_KEY_IS_WRONG_LENGTH);
-				goto err;
-				}
-		} 
-		if (EVP_CipherInit_ex(evp_ctx,NULL,NULL,tmp,NULL,0) <= 0)
-			goto err;
-
-		OPENSSL_cleanse(tmp,jj);
-
-		if (out == NULL)
-			out=etmp;
-		else
-			BIO_push(out,etmp);
-		etmp=NULL;
-		}
-
-#if 1
-	if (PKCS7_is_detached(p7) || (in_bio != NULL))
-		{
-		bio=in_bio;
-		}
-	else 
-		{
-#if 0
-		bio=BIO_new(BIO_s_mem());
-		/* We need to set this so that when we have read all
-		 * the data, the encrypt BIO, if present, will read
-		 * EOF and encode the last few bytes */
-		BIO_set_mem_eof_return(bio,0);
-
-		if (data_body->length > 0)
-			BIO_write(bio,(char *)data_body->data,data_body->length);
-#else
-		if (data_body->length > 0)
-		      bio = BIO_new_mem_buf(data_body->data,data_body->length);
-		else {
-			bio=BIO_new(BIO_s_mem());
-			BIO_set_mem_eof_return(bio,0);
-		}
-		if (bio == NULL)
-			goto err;
-#endif
-		}
-	BIO_push(out,bio);
-	bio=NULL;
-#endif
-	if (0)
-		{
-err:
-		if (out != NULL) BIO_free_all(out);
-		if (btmp != NULL) BIO_free_all(btmp);
-		if (etmp != NULL) BIO_free_all(etmp);
-		if (bio != NULL) BIO_free_all(bio);
-		out=NULL;
-		}
-	if (tmp != NULL)
-		OPENSSL_free(tmp);
-	return(out);
-	}
-
-static BIO *PKCS7_find_digest(EVP_MD_CTX **pmd, BIO *bio, int nid)
-	{
-	for (;;)
-		{
-		bio=BIO_find_type(bio,BIO_TYPE_MD);
-		if (bio == NULL)
-			{
-			PKCS7err(PKCS7_F_PKCS7_FIND_DIGEST,PKCS7_R_UNABLE_TO_FIND_MESSAGE_DIGEST);
-			return NULL;	
-			}
-		BIO_get_md_ctx(bio,pmd);
-		if (*pmd == NULL)
-			{
-			PKCS7err(PKCS7_F_PKCS7_FIND_DIGEST,ERR_R_INTERNAL_ERROR);
-			return NULL;
-			}	
-		if (EVP_MD_CTX_type(*pmd) == nid)
-			return bio;
-		bio=BIO_next(bio);
-		}
-	return NULL;
-	}
-
-int PKCS7_dataFinal(PKCS7 *p7, BIO *bio)
-	{
-	int ret=0;
-	int i,j;
-	BIO *btmp;
-	BUF_MEM *buf_mem=NULL;
-	BUF_MEM *buf=NULL;
-	PKCS7_SIGNER_INFO *si;
-	EVP_MD_CTX *mdc,ctx_tmp;
-	STACK_OF(X509_ATTRIBUTE) *sk;
-	STACK_OF(PKCS7_SIGNER_INFO) *si_sk=NULL;
-	ASN1_OCTET_STRING *os=NULL;
-
-	EVP_MD_CTX_init(&ctx_tmp);
-	i=OBJ_obj2nid(p7->type);
-	p7->state=PKCS7_S_HEADER;
-
-	switch (i)
-		{
-	case NID_pkcs7_signedAndEnveloped:
-		/* XXXXXXXXXXXXXXXX */
-		si_sk=p7->d.signed_and_enveloped->signer_info;
-		if (!(os=M_ASN1_OCTET_STRING_new()))
-			{
-			PKCS7err(PKCS7_F_PKCS7_DATAFINAL,ERR_R_MALLOC_FAILURE);
-			goto err;
-			}
-		p7->d.signed_and_enveloped->enc_data->enc_data=os;
-		break;
-	case NID_pkcs7_enveloped:
-		/* XXXXXXXXXXXXXXXX */
-		if (!(os=M_ASN1_OCTET_STRING_new()))
-			{
-			PKCS7err(PKCS7_F_PKCS7_DATAFINAL,ERR_R_MALLOC_FAILURE);
-			goto err;
-			}
-		p7->d.enveloped->enc_data->enc_data=os;
-		break;
-	case NID_pkcs7_signed:
-		si_sk=p7->d.sign->signer_info;
-		os=PKCS7_get_octet_string(p7->d.sign->contents);
-		/* If detached data then the content is excluded */
-		if(PKCS7_type_is_data(p7->d.sign->contents) && p7->detached) {
-			M_ASN1_OCTET_STRING_free(os);
-			p7->d.sign->contents->d.data = NULL;
-		}
-		break;
-
-	case NID_pkcs7_digest:
-		os=PKCS7_get_octet_string(p7->d.digest->contents);
-		/* If detached data then the content is excluded */
-		if(PKCS7_type_is_data(p7->d.digest->contents) && p7->detached)
-			{
-			M_ASN1_OCTET_STRING_free(os);
-			p7->d.digest->contents->d.data = NULL;
-			}
-		break;
-
-		}
-
-	if (si_sk != NULL)
-		{
-		if ((buf=BUF_MEM_new()) == NULL)
-			{
-			PKCS7err(PKCS7_F_PKCS7_DATAFINAL,ERR_R_BIO_LIB);
-			goto err;
-			}
-		for (i=0; i<sk_PKCS7_SIGNER_INFO_num(si_sk); i++)
-			{
-			si=sk_PKCS7_SIGNER_INFO_value(si_sk,i);
-			if (si->pkey == NULL) continue;
-
-			j=OBJ_obj2nid(si->digest_alg->algorithm);
-
-			btmp=bio;
-
-			btmp = PKCS7_find_digest(&mdc, btmp, j);
-
-			if (btmp == NULL)
-				goto err;
-
-			/* We now have the EVP_MD_CTX, lets do the
-			 * signing. */
-			EVP_MD_CTX_copy_ex(&ctx_tmp,mdc);
-			if (!BUF_MEM_grow_clean(buf,EVP_PKEY_size(si->pkey)))
-				{
-				PKCS7err(PKCS7_F_PKCS7_DATAFINAL,ERR_R_BIO_LIB);
-				goto err;
-				}
-
-			sk=si->auth_attr;
-
-			/* If there are attributes, we add the digest
-			 * attribute and only sign the attributes */
-			if ((sk != NULL) && (sk_X509_ATTRIBUTE_num(sk) != 0))
-				{
-				unsigned char md_data[EVP_MAX_MD_SIZE], *abuf=NULL;
-				unsigned int md_len, alen;
-				ASN1_OCTET_STRING *digest;
-				ASN1_UTCTIME *sign_time;
-				const EVP_MD *md_tmp;
-
-				/* Add signing time if not already present */
-				if (!PKCS7_get_signed_attribute(si,
-							NID_pkcs9_signingTime))
-					{
-					if (!(sign_time=X509_gmtime_adj(NULL,0)))
-						{
-						PKCS7err(PKCS7_F_PKCS7_DATAFINAL,
-							ERR_R_MALLOC_FAILURE);
-						goto err;
-						}
-					if (!PKCS7_add_signed_attribute(si,
-						NID_pkcs9_signingTime,
-						V_ASN1_UTCTIME,sign_time))
-						{
-						M_ASN1_UTCTIME_free(sign_time);
-						goto err;
-						}
-					}
-
-				/* Add digest */
-				md_tmp=EVP_MD_CTX_md(&ctx_tmp);
-				EVP_DigestFinal_ex(&ctx_tmp,md_data,&md_len);
-				if (!(digest=M_ASN1_OCTET_STRING_new()))
-					{
-					PKCS7err(PKCS7_F_PKCS7_DATAFINAL,
-						ERR_R_MALLOC_FAILURE);
-					goto err;
-					}
-				if (!M_ASN1_OCTET_STRING_set(digest,md_data,
-								md_len))
-					{
-					PKCS7err(PKCS7_F_PKCS7_DATAFINAL,
-						ERR_R_MALLOC_FAILURE);
-					M_ASN1_OCTET_STRING_free(digest);
-					goto err;
-					}
-				if (!PKCS7_add_signed_attribute(si,
-					NID_pkcs9_messageDigest,
-					V_ASN1_OCTET_STRING,digest))
-					{
-					M_ASN1_OCTET_STRING_free(digest);
-					goto err;
-					}
-
-				/* Now sign the attributes */
-				EVP_SignInit_ex(&ctx_tmp,md_tmp,NULL);
-				alen = ASN1_item_i2d((ASN1_VALUE *)sk,&abuf,
-							ASN1_ITEM_rptr(PKCS7_ATTR_SIGN));
-				if(!abuf) goto err;
-				EVP_SignUpdate(&ctx_tmp,abuf,alen);
-				OPENSSL_free(abuf);
-				}
-
-#ifndef OPENSSL_NO_DSA
-			if (si->pkey->type == EVP_PKEY_DSA)
-				ctx_tmp.digest=EVP_dss1();
-#endif
-#ifndef OPENSSL_NO_ECDSA
- 			if (si->pkey->type == EVP_PKEY_EC)
- 				ctx_tmp.digest=EVP_ecdsa();
-#endif
-
-			if (!EVP_SignFinal(&ctx_tmp,(unsigned char *)buf->data,
-				(unsigned int *)&buf->length,si->pkey))
-				{
-				PKCS7err(PKCS7_F_PKCS7_DATAFINAL,ERR_R_EVP_LIB);
-				goto err;
-				}
-			if (!ASN1_STRING_set(si->enc_digest,
-				(unsigned char *)buf->data,buf->length))
-				{
-				PKCS7err(PKCS7_F_PKCS7_DATAFINAL,ERR_R_ASN1_LIB);
-				goto err;
-				}
-			}
-		}
-	else if (i == NID_pkcs7_digest)
-		{
-		unsigned char md_data[EVP_MAX_MD_SIZE];
-		unsigned int md_len;
-		if (!PKCS7_find_digest(&mdc, bio,
-				OBJ_obj2nid(p7->d.digest->md->algorithm)))
-			goto err;
-		EVP_DigestFinal_ex(mdc,md_data,&md_len);
-		M_ASN1_OCTET_STRING_set(p7->d.digest->digest, md_data, md_len);
-		}
-
-	if (!PKCS7_is_detached(p7))
-		{
-		btmp=BIO_find_type(bio,BIO_TYPE_MEM);
-		if (btmp == NULL)
-			{
-			PKCS7err(PKCS7_F_PKCS7_DATAFINAL,PKCS7_R_UNABLE_TO_FIND_MEM_BIO);
-			goto err;
-			}
-		BIO_get_mem_ptr(btmp,&buf_mem);
-		/* Mark the BIO read only then we can use its copy of the data
-		 * instead of making an extra copy.
-		 */
-		BIO_set_flags(btmp, BIO_FLAGS_MEM_RDONLY);
-		BIO_set_mem_eof_return(btmp, 0);
-		os->data = (unsigned char *)buf_mem->data;
-		os->length = buf_mem->length;
-#if 0
-		M_ASN1_OCTET_STRING_set(os,
-			(unsigned char *)buf_mem->data,buf_mem->length);
-#endif
-		}
-	ret=1;
-err:
-	EVP_MD_CTX_cleanup(&ctx_tmp);
-	if (buf != NULL) BUF_MEM_free(buf);
-	return(ret);
-	}
-
-int PKCS7_dataVerify(X509_STORE *cert_store, X509_STORE_CTX *ctx, BIO *bio,
-	     PKCS7 *p7, PKCS7_SIGNER_INFO *si)
-	{
-	PKCS7_ISSUER_AND_SERIAL *ias;
-	int ret=0,i;
-	STACK_OF(X509) *cert;
-	X509 *x509;
-
-	if (PKCS7_type_is_signed(p7))
-		{
-		cert=p7->d.sign->cert;
-		}
-	else if (PKCS7_type_is_signedAndEnveloped(p7))
-		{
-		cert=p7->d.signed_and_enveloped->cert;
-		}
-	else
-		{
-		PKCS7err(PKCS7_F_PKCS7_DATAVERIFY,PKCS7_R_WRONG_PKCS7_TYPE);
-		goto err;
-		}
-	/* XXXXXXXXXXXXXXXXXXXXXXX */
-	ias=si->issuer_and_serial;
-
-	x509=X509_find_by_issuer_and_serial(cert,ias->issuer,ias->serial);
-
-	/* were we able to find the cert in passed to us */
-	if (x509 == NULL)
-		{
-		PKCS7err(PKCS7_F_PKCS7_DATAVERIFY,PKCS7_R_UNABLE_TO_FIND_CERTIFICATE);
-		goto err;
-		}
-
-	/* Lets verify */
-	if(!X509_STORE_CTX_init(ctx,cert_store,x509,cert))
-		{
-		PKCS7err(PKCS7_F_PKCS7_DATAVERIFY,ERR_R_X509_LIB);
-		goto err;
-		}
-	X509_STORE_CTX_set_purpose(ctx, X509_PURPOSE_SMIME_SIGN);
-	i=X509_verify_cert(ctx);
-	if (i <= 0) 
-		{
-		PKCS7err(PKCS7_F_PKCS7_DATAVERIFY,ERR_R_X509_LIB);
-		X509_STORE_CTX_cleanup(ctx);
-		goto err;
-		}
-	X509_STORE_CTX_cleanup(ctx);
-
-	return PKCS7_signatureVerify(bio, p7, si, x509);
-	err:
-	return ret;
-	}
-
-int PKCS7_signatureVerify(BIO *bio, PKCS7 *p7, PKCS7_SIGNER_INFO *si,
-								X509 *x509)
-	{
-	ASN1_OCTET_STRING *os;
-	EVP_MD_CTX mdc_tmp,*mdc;
-	int ret=0,i;
-	int md_type;
-	STACK_OF(X509_ATTRIBUTE) *sk;
-	BIO *btmp;
-	EVP_PKEY *pkey;
-
-	EVP_MD_CTX_init(&mdc_tmp);
-
-	if (!PKCS7_type_is_signed(p7) && 
-				!PKCS7_type_is_signedAndEnveloped(p7)) {
-		PKCS7err(PKCS7_F_PKCS7_SIGNATUREVERIFY,
-						PKCS7_R_WRONG_PKCS7_TYPE);
-		goto err;
-	}
-
-	md_type=OBJ_obj2nid(si->digest_alg->algorithm);
-
-	btmp=bio;
-	for (;;)
-		{
-		if ((btmp == NULL) ||
-			((btmp=BIO_find_type(btmp,BIO_TYPE_MD)) == NULL))
-			{
-			PKCS7err(PKCS7_F_PKCS7_SIGNATUREVERIFY,
-					PKCS7_R_UNABLE_TO_FIND_MESSAGE_DIGEST);
-			goto err;
-			}
-		BIO_get_md_ctx(btmp,&mdc);
-		if (mdc == NULL)
-			{
-			PKCS7err(PKCS7_F_PKCS7_SIGNATUREVERIFY,
-							ERR_R_INTERNAL_ERROR);
-			goto err;
-			}
-		if (EVP_MD_CTX_type(mdc) == md_type)
-			break;
-		/* Workaround for some broken clients that put the signature
-		 * OID instead of the digest OID in digest_alg->algorithm
-		 */
-		if (EVP_MD_pkey_type(EVP_MD_CTX_md(mdc)) == md_type)
-			break;
-		btmp=BIO_next(btmp);
-		}
-
-	/* mdc is the digest ctx that we want, unless there are attributes,
-	 * in which case the digest is the signed attributes */
-	EVP_MD_CTX_copy_ex(&mdc_tmp,mdc);
-
-	sk=si->auth_attr;
-	if ((sk != NULL) && (sk_X509_ATTRIBUTE_num(sk) != 0))
-		{
-		unsigned char md_dat[EVP_MAX_MD_SIZE], *abuf = NULL;
-                unsigned int md_len, alen;
-		ASN1_OCTET_STRING *message_digest;
-
-		EVP_DigestFinal_ex(&mdc_tmp,md_dat,&md_len);
-		message_digest=PKCS7_digest_from_attributes(sk);
-		if (!message_digest)
-			{
-			PKCS7err(PKCS7_F_PKCS7_SIGNATUREVERIFY,
-					PKCS7_R_UNABLE_TO_FIND_MESSAGE_DIGEST);
-			goto err;
-			}
-		if ((message_digest->length != (int)md_len) ||
-			(memcmp(message_digest->data,md_dat,md_len)))
-			{
-#if 0
-{
-int ii;
-for (ii=0; ii<message_digest->length; ii++)
-	printf("%02X",message_digest->data[ii]); printf(" sent\n");
-for (ii=0; ii<md_len; ii++) printf("%02X",md_dat[ii]); printf(" calc\n");
-}
-#endif
-			PKCS7err(PKCS7_F_PKCS7_SIGNATUREVERIFY,
-							PKCS7_R_DIGEST_FAILURE);
-			ret= -1;
-			goto err;
-			}
-
-		EVP_VerifyInit_ex(&mdc_tmp,EVP_get_digestbynid(md_type), NULL);
-
-		alen = ASN1_item_i2d((ASN1_VALUE *)sk, &abuf,
-						ASN1_ITEM_rptr(PKCS7_ATTR_VERIFY));
-		EVP_VerifyUpdate(&mdc_tmp, abuf, alen);
-
-		OPENSSL_free(abuf);
-		}
-
-	os=si->enc_digest;
-	pkey = X509_get_pubkey(x509);
-	if (!pkey)
-		{
-		ret = -1;
-		goto err;
-		}
-#ifndef OPENSSL_NO_DSA
-	if(pkey->type == EVP_PKEY_DSA) mdc_tmp.digest=EVP_dss1();
-#endif
-#ifndef OPENSSL_NO_ECDSA
-	if (pkey->type == EVP_PKEY_EC) mdc_tmp.digest=EVP_ecdsa();
-#endif
-
-	i=EVP_VerifyFinal(&mdc_tmp,os->data,os->length, pkey);
-	EVP_PKEY_free(pkey);
-	if (i <= 0)
-		{
-		PKCS7err(PKCS7_F_PKCS7_SIGNATUREVERIFY,
-						PKCS7_R_SIGNATURE_FAILURE);
-		ret= -1;
-		goto err;
-		}
-	else
-		ret=1;
-err:
-	EVP_MD_CTX_cleanup(&mdc_tmp);
-	return(ret);
-	}
-
-PKCS7_ISSUER_AND_SERIAL *PKCS7_get_issuer_and_serial(PKCS7 *p7, int idx)
-	{
-	STACK_OF(PKCS7_RECIP_INFO) *rsk;
-	PKCS7_RECIP_INFO *ri;
-	int i;
-
-	i=OBJ_obj2nid(p7->type);
-	if (i != NID_pkcs7_signedAndEnveloped)
-		return NULL;
-	if (p7->d.signed_and_enveloped == NULL)
-		return NULL;
-	rsk=p7->d.signed_and_enveloped->recipientinfo;
-	if (rsk == NULL)
-		return NULL;
-	ri=sk_PKCS7_RECIP_INFO_value(rsk,0);
-	if (sk_PKCS7_RECIP_INFO_num(rsk) <= idx) return(NULL);
-	ri=sk_PKCS7_RECIP_INFO_value(rsk,idx);
-	return(ri->issuer_and_serial);
-	}
-
-ASN1_TYPE *PKCS7_get_signed_attribute(PKCS7_SIGNER_INFO *si, int nid)
-	{
-	return(get_attribute(si->auth_attr,nid));
-	}
-
-ASN1_TYPE *PKCS7_get_attribute(PKCS7_SIGNER_INFO *si, int nid)
-	{
-	return(get_attribute(si->unauth_attr,nid));
-	}
-
-static ASN1_TYPE *get_attribute(STACK_OF(X509_ATTRIBUTE) *sk, int nid)
-	{
-	int i;
-	X509_ATTRIBUTE *xa;
-	ASN1_OBJECT *o;
-
-	o=OBJ_nid2obj(nid);
-	if (!o || !sk) return(NULL);
-	for (i=0; i<sk_X509_ATTRIBUTE_num(sk); i++)
-		{
-		xa=sk_X509_ATTRIBUTE_value(sk,i);
-		if (OBJ_cmp(xa->object,o) == 0)
-			{
-			if (!xa->single && sk_ASN1_TYPE_num(xa->value.set))
-				return(sk_ASN1_TYPE_value(xa->value.set,0));
-			else
-				return(NULL);
-			}
-		}
-	return(NULL);
-	}
-
-ASN1_OCTET_STRING *PKCS7_digest_from_attributes(STACK_OF(X509_ATTRIBUTE) *sk)
-{
-	ASN1_TYPE *astype;
-	if(!(astype = get_attribute(sk, NID_pkcs9_messageDigest))) return NULL;
-	return astype->value.octet_string;
-}
-
-int PKCS7_set_signed_attributes(PKCS7_SIGNER_INFO *p7si,
-				STACK_OF(X509_ATTRIBUTE) *sk)
-	{
-	int i;
-
-	if (p7si->auth_attr != NULL)
-		sk_X509_ATTRIBUTE_pop_free(p7si->auth_attr,X509_ATTRIBUTE_free);
-	p7si->auth_attr=sk_X509_ATTRIBUTE_dup(sk);
-	if (p7si->auth_attr == NULL)
-		return 0;
-	for (i=0; i<sk_X509_ATTRIBUTE_num(sk); i++)
-		{
-		if ((sk_X509_ATTRIBUTE_set(p7si->auth_attr,i,
-			X509_ATTRIBUTE_dup(sk_X509_ATTRIBUTE_value(sk,i))))
-		    == NULL)
-			return(0);
-		}
-	return(1);
-	}
-
-int PKCS7_set_attributes(PKCS7_SIGNER_INFO *p7si, STACK_OF(X509_ATTRIBUTE) *sk)
-	{
-	int i;
-
-	if (p7si->unauth_attr != NULL)
-		sk_X509_ATTRIBUTE_pop_free(p7si->unauth_attr,
-					   X509_ATTRIBUTE_free);
-	p7si->unauth_attr=sk_X509_ATTRIBUTE_dup(sk);
-	if (p7si->unauth_attr == NULL)
-		return 0;
-	for (i=0; i<sk_X509_ATTRIBUTE_num(sk); i++)
-		{
-		if ((sk_X509_ATTRIBUTE_set(p7si->unauth_attr,i,
-                        X509_ATTRIBUTE_dup(sk_X509_ATTRIBUTE_value(sk,i))))
-		    == NULL)
-			return(0);
-		}
-	return(1);
-	}
-
-int PKCS7_add_signed_attribute(PKCS7_SIGNER_INFO *p7si, int nid, int atrtype,
-	     void *value)
-	{
-	return(add_attribute(&(p7si->auth_attr),nid,atrtype,value));
-	}
-
-int PKCS7_add_attribute(PKCS7_SIGNER_INFO *p7si, int nid, int atrtype,
-	     void *value)
-	{
-	return(add_attribute(&(p7si->unauth_attr),nid,atrtype,value));
-	}
-
-static int add_attribute(STACK_OF(X509_ATTRIBUTE) **sk, int nid, int atrtype,
-			 void *value)
-	{
-	X509_ATTRIBUTE *attr=NULL;
-
-	if (*sk == NULL)
-		{
-		if (!(*sk = sk_X509_ATTRIBUTE_new_null()))
-			return 0;
-new_attrib:
-		if (!(attr=X509_ATTRIBUTE_create(nid,atrtype,value)))
-			return 0;
-		if (!sk_X509_ATTRIBUTE_push(*sk,attr))
-			{
-			X509_ATTRIBUTE_free(attr);
-			return 0;
-			}
-		}
-	else
-		{
-		int i;
-
-		for (i=0; i<sk_X509_ATTRIBUTE_num(*sk); i++)
-			{
-			attr=sk_X509_ATTRIBUTE_value(*sk,i);
-			if (OBJ_obj2nid(attr->object) == nid)
-				{
-				X509_ATTRIBUTE_free(attr);
-				attr=X509_ATTRIBUTE_create(nid,atrtype,value);
-				if (attr == NULL)
-					return 0;
-				if (!sk_X509_ATTRIBUTE_set(*sk,i,attr))
-					{
-					X509_ATTRIBUTE_free(attr);
-					return 0;
-					}
-				goto end;
-				}
-			}
-		goto new_attrib;
-		}
-end:
-	return(1);
-	}
-
diff --git a/crypto/openssl/crypto/pkcs7/pk7_enc.c b/crypto/openssl/crypto/pkcs7/pk7_enc.c
deleted file mode 100644
index acbb189c59af..000000000000
--- a/crypto/openssl/crypto/pkcs7/pk7_enc.c
+++ /dev/null
@@ -1,76 +0,0 @@
-/* crypto/pkcs7/pk7_enc.c */
-/* Copyright (C) 1995-1998 Eric Young (eay@cryptsoft.com)
- * All rights reserved.
- *
- * This package is an SSL implementation written
- * by Eric Young (eay@cryptsoft.com).
- * The implementation was written so as to conform with Netscapes SSL.
- * 
- * This library is free for commercial and non-commercial use as long as
- * the following conditions are aheared to.  The following conditions
- * apply to all code found in this distribution, be it the RC4, RSA,
- * lhash, DES, etc., code; not just the SSL code.  The SSL documentation
- * included with this distribution is covered by the same copyright terms
- * except that the holder is Tim Hudson (tjh@cryptsoft.com).
- * 
- * Copyright remains Eric Young's, and as such any Copyright notices in
- * the code are not to be removed.
- * If this package is used in a product, Eric Young should be given attribution
- * as the author of the parts of the library used.
- * This can be in the form of a textual message at program startup or
- * in documentation (online or textual) provided with the package.
- * 
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions
- * are met:
- * 1. Redistributions of source code must retain the copyright
- *    notice, this list of conditions and the following disclaimer.
- * 2. Redistributions in binary form must reproduce the above copyright
- *    notice, this list of conditions and the following disclaimer in the
- *    documentation and/or other materials provided with the distribution.
- * 3. All advertising materials mentioning features or use of this software
- *    must display the following acknowledgement:
- *    "This product includes cryptographic software written by
- *     Eric Young (eay@cryptsoft.com)"
- *    The word 'cryptographic' can be left out if the rouines from the library
- *    being used are not cryptographic related :-).
- * 4. If you include any Windows specific code (or a derivative thereof) from 
- *    the apps directory (application code) you must include an acknowledgement:
- *    "This product includes software written by Tim Hudson (tjh@cryptsoft.com)"
- * 
- * THIS SOFTWARE IS PROVIDED BY ERIC YOUNG ``AS IS'' AND
- * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
- * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
- * ARE DISCLAIMED.  IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE
- * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
- * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
- * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
- * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
- * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
- * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
- * SUCH DAMAGE.
- * 
- * The licence and distribution terms for any publically available version or
- * derivative of this code cannot be changed.  i.e. this code cannot simply be
- * copied and put under another distribution licence
- * [including the GNU Public Licence.]
- */
-
-#include <stdio.h>
-#include "cryptlib.h"
-#include <openssl/evp.h>
-#include <openssl/rand.h>
-#include <openssl/objects.h>
-#include <openssl/x509.h>
-#include <openssl/pkcs7.h>
-
-PKCS7_in_bio(PKCS7 *p7,BIO *in);
-PKCS7_out_bio(PKCS7 *p7,BIO *out);
-
-PKCS7_add_signer(PKCS7 *p7,X509 *cert,EVP_PKEY *key);
-PKCS7_cipher(PKCS7 *p7,EVP_CIPHER *cipher);
-
-PKCS7_Init(PKCS7 *p7);
-PKCS7_Update(PKCS7 *p7);
-PKCS7_Finish(PKCS7 *p7);
-
diff --git a/crypto/openssl/crypto/pkcs7/pk7_lib.c b/crypto/openssl/crypto/pkcs7/pk7_lib.c
deleted file mode 100644
index f2490941a34d..000000000000
--- a/crypto/openssl/crypto/pkcs7/pk7_lib.c
+++ /dev/null
@@ -1,589 +0,0 @@
-/* crypto/pkcs7/pk7_lib.c */
-/* Copyright (C) 1995-1998 Eric Young (eay@cryptsoft.com)
- * All rights reserved.
- *
- * This package is an SSL implementation written
- * by Eric Young (eay@cryptsoft.com).
- * The implementation was written so as to conform with Netscapes SSL.
- * 
- * This library is free for commercial and non-commercial use as long as
- * the following conditions are aheared to.  The following conditions
- * apply to all code found in this distribution, be it the RC4, RSA,
- * lhash, DES, etc., code; not just the SSL code.  The SSL documentation
- * included with this distribution is covered by the same copyright terms
- * except that the holder is Tim Hudson (tjh@cryptsoft.com).
- * 
- * Copyright remains Eric Young's, and as such any Copyright notices in
- * the code are not to be removed.
- * If this package is used in a product, Eric Young should be given attribution
- * as the author of the parts of the library used.
- * This can be in the form of a textual message at program startup or
- * in documentation (online or textual) provided with the package.
- * 
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions
- * are met:
- * 1. Redistributions of source code must retain the copyright
- *    notice, this list of conditions and the following disclaimer.
- * 2. Redistributions in binary form must reproduce the above copyright
- *    notice, this list of conditions and the following disclaimer in the
- *    documentation and/or other materials provided with the distribution.
- * 3. All advertising materials mentioning features or use of this software
- *    must display the following acknowledgement:
- *    "This product includes cryptographic software written by
- *     Eric Young (eay@cryptsoft.com)"
- *    The word 'cryptographic' can be left out if the rouines from the library
- *    being used are not cryptographic related :-).
- * 4. If you include any Windows specific code (or a derivative thereof) from 
- *    the apps directory (application code) you must include an acknowledgement:
- *    "This product includes software written by Tim Hudson (tjh@cryptsoft.com)"
- * 
- * THIS SOFTWARE IS PROVIDED BY ERIC YOUNG ``AS IS'' AND
- * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
- * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
- * ARE DISCLAIMED.  IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE
- * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
- * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
- * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
- * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
- * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
- * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
- * SUCH DAMAGE.
- * 
- * The licence and distribution terms for any publically available version or
- * derivative of this code cannot be changed.  i.e. this code cannot simply be
- * copied and put under another distribution licence
- * [including the GNU Public Licence.]
- */
-
-#include <stdio.h>
-#include "cryptlib.h"
-#include <openssl/objects.h>
-#include <openssl/x509.h>
-
-long PKCS7_ctrl(PKCS7 *p7, int cmd, long larg, char *parg)
-	{
-	int nid;
-	long ret;
-
-	nid=OBJ_obj2nid(p7->type);
-
-	switch (cmd)
-		{
-	case PKCS7_OP_SET_DETACHED_SIGNATURE:
-		if (nid == NID_pkcs7_signed)
-			{
-			ret=p7->detached=(int)larg;
-			if (ret && PKCS7_type_is_data(p7->d.sign->contents))
-					{
-					ASN1_OCTET_STRING *os;
-					os=p7->d.sign->contents->d.data;
-					ASN1_OCTET_STRING_free(os);
-					p7->d.sign->contents->d.data = NULL;
-					}
-			}
-		else
-			{
-			PKCS7err(PKCS7_F_PKCS7_CTRL,PKCS7_R_OPERATION_NOT_SUPPORTED_ON_THIS_TYPE);
-			ret=0;
-			}
-		break;
-	case PKCS7_OP_GET_DETACHED_SIGNATURE:
-		if (nid == NID_pkcs7_signed)
-			{
-			if(!p7->d.sign  || !p7->d.sign->contents->d.ptr)
-				ret = 1;
-			else ret = 0;
-				
-			p7->detached = ret;
-			}
-		else
-			{
-			PKCS7err(PKCS7_F_PKCS7_CTRL,PKCS7_R_OPERATION_NOT_SUPPORTED_ON_THIS_TYPE);
-			ret=0;
-			}
-			
-		break;
-	default:
-		PKCS7err(PKCS7_F_PKCS7_CTRL,PKCS7_R_UNKNOWN_OPERATION);
-		ret=0;
-		}
-	return(ret);
-	}
-
-int PKCS7_content_new(PKCS7 *p7, int type)
-	{
-	PKCS7 *ret=NULL;
-
-	if ((ret=PKCS7_new()) == NULL) goto err;
-	if (!PKCS7_set_type(ret,type)) goto err;
-	if (!PKCS7_set_content(p7,ret)) goto err;
-
-	return(1);
-err:
-	if (ret != NULL) PKCS7_free(ret);
-	return(0);
-	}
-
-int PKCS7_set_content(PKCS7 *p7, PKCS7 *p7_data)
-	{
-	int i;
-
-	i=OBJ_obj2nid(p7->type);
-	switch (i)
-		{
-	case NID_pkcs7_signed:
-		if (p7->d.sign->contents != NULL)
-			PKCS7_free(p7->d.sign->contents);
-		p7->d.sign->contents=p7_data;
-		break;
-	case NID_pkcs7_digest:
-		if (p7->d.digest->contents != NULL)
-			PKCS7_free(p7->d.digest->contents);
-		p7->d.digest->contents=p7_data;
-		break;
-	case NID_pkcs7_data:
-	case NID_pkcs7_enveloped:
-	case NID_pkcs7_signedAndEnveloped:
-	case NID_pkcs7_encrypted:
-	default:
-		PKCS7err(PKCS7_F_PKCS7_SET_CONTENT,PKCS7_R_UNSUPPORTED_CONTENT_TYPE);
-		goto err;
-		}
-	return(1);
-err:
-	return(0);
-	}
-
-int PKCS7_set_type(PKCS7 *p7, int type)
-	{
-	ASN1_OBJECT *obj;
-
-	/*PKCS7_content_free(p7);*/
-	obj=OBJ_nid2obj(type); /* will not fail */
-
-	switch (type)
-		{
-	case NID_pkcs7_signed:
-		p7->type=obj;
-		if ((p7->d.sign=PKCS7_SIGNED_new()) == NULL)
-			goto err;
-		if (!ASN1_INTEGER_set(p7->d.sign->version,1))
-			{
-			PKCS7_SIGNED_free(p7->d.sign);
-			p7->d.sign=NULL;
-			goto err;
-			}
-		break;
-	case NID_pkcs7_data:
-		p7->type=obj;
-		if ((p7->d.data=M_ASN1_OCTET_STRING_new()) == NULL)
-			goto err;
-		break;
-	case NID_pkcs7_signedAndEnveloped:
-		p7->type=obj;
-		if ((p7->d.signed_and_enveloped=PKCS7_SIGN_ENVELOPE_new())
-			== NULL) goto err;
-		ASN1_INTEGER_set(p7->d.signed_and_enveloped->version,1);
-		if (!ASN1_INTEGER_set(p7->d.signed_and_enveloped->version,1))
-			goto err;
-		p7->d.signed_and_enveloped->enc_data->content_type
-						= OBJ_nid2obj(NID_pkcs7_data);
-		break;
-	case NID_pkcs7_enveloped:
-		p7->type=obj;
-		if ((p7->d.enveloped=PKCS7_ENVELOPE_new())
-			== NULL) goto err;
-		if (!ASN1_INTEGER_set(p7->d.enveloped->version,0))
-			goto err;
-		p7->d.enveloped->enc_data->content_type
-						= OBJ_nid2obj(NID_pkcs7_data);
-		break;
-	case NID_pkcs7_encrypted:
-		p7->type=obj;
-		if ((p7->d.encrypted=PKCS7_ENCRYPT_new())
-			== NULL) goto err;
-		if (!ASN1_INTEGER_set(p7->d.encrypted->version,0))
-			goto err;
-		p7->d.encrypted->enc_data->content_type
-						= OBJ_nid2obj(NID_pkcs7_data);
-		break;
-
-	case NID_pkcs7_digest:
-		p7->type=obj;
-		if ((p7->d.digest=PKCS7_DIGEST_new())
-			== NULL) goto err;
-		if (!ASN1_INTEGER_set(p7->d.digest->version,0))
-			goto err;
-		break;
-	default:
-		PKCS7err(PKCS7_F_PKCS7_SET_TYPE,PKCS7_R_UNSUPPORTED_CONTENT_TYPE);
-		goto err;
-		}
-	return(1);
-err:
-	return(0);
-	}
-
-int PKCS7_set0_type_other(PKCS7 *p7, int type, ASN1_TYPE *other)
-	{
-	p7->type = OBJ_nid2obj(type);
-	p7->d.other = other;
-	return 1;
-	}
-
-int PKCS7_add_signer(PKCS7 *p7, PKCS7_SIGNER_INFO *psi)
-	{
-	int i,j,nid;
-	X509_ALGOR *alg;
-	STACK_OF(PKCS7_SIGNER_INFO) *signer_sk;
-	STACK_OF(X509_ALGOR) *md_sk;
-
-	i=OBJ_obj2nid(p7->type);
-	switch (i)
-		{
-	case NID_pkcs7_signed:
-		signer_sk=	p7->d.sign->signer_info;
-		md_sk=		p7->d.sign->md_algs;
-		break;
-	case NID_pkcs7_signedAndEnveloped:
-		signer_sk=	p7->d.signed_and_enveloped->signer_info;
-		md_sk=		p7->d.signed_and_enveloped->md_algs;
-		break;
-	default:
-		PKCS7err(PKCS7_F_PKCS7_ADD_SIGNER,PKCS7_R_WRONG_CONTENT_TYPE);
-		return(0);
-		}
-
-	nid=OBJ_obj2nid(psi->digest_alg->algorithm);
-
-	/* If the digest is not currently listed, add it */
-	j=0;
-	for (i=0; i<sk_X509_ALGOR_num(md_sk); i++)
-		{
-		alg=sk_X509_ALGOR_value(md_sk,i);
-		if (OBJ_obj2nid(alg->algorithm) == nid)
-			{
-			j=1;
-			break;
-			}
-		}
-	if (!j) /* we need to add another algorithm */
-		{
-		if(!(alg=X509_ALGOR_new())
-			|| !(alg->parameter = ASN1_TYPE_new()))
-			{
-			X509_ALGOR_free(alg);
-			PKCS7err(PKCS7_F_PKCS7_ADD_SIGNER,ERR_R_MALLOC_FAILURE);
-			return(0);
-			}
-		alg->algorithm=OBJ_nid2obj(nid);
-		alg->parameter->type = V_ASN1_NULL;
-		if (!sk_X509_ALGOR_push(md_sk,alg))
-			{
-			X509_ALGOR_free(alg);
-			return 0;
-			}
-		}
-
-	if (!sk_PKCS7_SIGNER_INFO_push(signer_sk,psi))
-		return 0;
-	return(1);
-	}
-
-int PKCS7_add_certificate(PKCS7 *p7, X509 *x509)
-	{
-	int i;
-	STACK_OF(X509) **sk;
-
-	i=OBJ_obj2nid(p7->type);
-	switch (i)
-		{
-	case NID_pkcs7_signed:
-		sk= &(p7->d.sign->cert);
-		break;
-	case NID_pkcs7_signedAndEnveloped:
-		sk= &(p7->d.signed_and_enveloped->cert);
-		break;
-	default:
-		PKCS7err(PKCS7_F_PKCS7_ADD_CERTIFICATE,PKCS7_R_WRONG_CONTENT_TYPE);
-		return(0);
-		}
-
-	if (*sk == NULL)
-		*sk=sk_X509_new_null();
-	if (*sk == NULL)
-		{
-		PKCS7err(PKCS7_F_PKCS7_ADD_CERTIFICATE,ERR_R_MALLOC_FAILURE);
-		return 0;
-		}
-	CRYPTO_add(&x509->references,1,CRYPTO_LOCK_X509);
-	if (!sk_X509_push(*sk,x509))
-		{
-		X509_free(x509);
-		return 0;
-		}
-	return(1);
-	}
-
-int PKCS7_add_crl(PKCS7 *p7, X509_CRL *crl)
-	{
-	int i;
-	STACK_OF(X509_CRL) **sk;
-
-	i=OBJ_obj2nid(p7->type);
-	switch (i)
-		{
-	case NID_pkcs7_signed:
-		sk= &(p7->d.sign->crl);
-		break;
-	case NID_pkcs7_signedAndEnveloped:
-		sk= &(p7->d.signed_and_enveloped->crl);
-		break;
-	default:
-		PKCS7err(PKCS7_F_PKCS7_ADD_CRL,PKCS7_R_WRONG_CONTENT_TYPE);
-		return(0);
-		}
-
-	if (*sk == NULL)
-		*sk=sk_X509_CRL_new_null();
-	if (*sk == NULL)
-		{
-		PKCS7err(PKCS7_F_PKCS7_ADD_CRL,ERR_R_MALLOC_FAILURE);
-		return 0;
-		}
-
-	CRYPTO_add(&crl->references,1,CRYPTO_LOCK_X509_CRL);
-	if (!sk_X509_CRL_push(*sk,crl))
-		{
-		X509_CRL_free(crl);
-		return 0;
-		}
-	return(1);
-	}
-
-int PKCS7_SIGNER_INFO_set(PKCS7_SIGNER_INFO *p7i, X509 *x509, EVP_PKEY *pkey,
-	     const EVP_MD *dgst)
-	{
-	int nid;
-	char is_dsa;
-
-	if (pkey->type == EVP_PKEY_DSA || pkey->type == EVP_PKEY_EC)
-		is_dsa = 1;
-	else
-		is_dsa = 0;
-	/* We now need to add another PKCS7_SIGNER_INFO entry */
-	if (!ASN1_INTEGER_set(p7i->version,1))
-		goto err;
-	if (!X509_NAME_set(&p7i->issuer_and_serial->issuer,
-			X509_get_issuer_name(x509)))
-		goto err;
-
-	/* because ASN1_INTEGER_set is used to set a 'long' we will do
-	 * things the ugly way. */
-	M_ASN1_INTEGER_free(p7i->issuer_and_serial->serial);
-	if (!(p7i->issuer_and_serial->serial=
-			M_ASN1_INTEGER_dup(X509_get_serialNumber(x509))))
-		goto err;
-
-	/* lets keep the pkey around for a while */
-	CRYPTO_add(&pkey->references,1,CRYPTO_LOCK_EVP_PKEY);
-	p7i->pkey=pkey;
-
-	/* Set the algorithms */
-	if (is_dsa) p7i->digest_alg->algorithm=OBJ_nid2obj(NID_sha1);
-	else	
-		p7i->digest_alg->algorithm=OBJ_nid2obj(EVP_MD_type(dgst));
-
-	if (p7i->digest_alg->parameter != NULL)
-		ASN1_TYPE_free(p7i->digest_alg->parameter);
-	if ((p7i->digest_alg->parameter=ASN1_TYPE_new()) == NULL)
-		goto err;
-	p7i->digest_alg->parameter->type=V_ASN1_NULL;
-
-	if (p7i->digest_enc_alg->parameter != NULL)
-		ASN1_TYPE_free(p7i->digest_enc_alg->parameter);
-	nid = EVP_PKEY_type(pkey->type);
-	if (nid == EVP_PKEY_RSA)
-		{
-		p7i->digest_enc_alg->algorithm=OBJ_nid2obj(NID_rsaEncryption);
-		if (!(p7i->digest_enc_alg->parameter=ASN1_TYPE_new()))
-			goto err;
-		p7i->digest_enc_alg->parameter->type=V_ASN1_NULL;
-		}
-	else if (nid == EVP_PKEY_DSA)
-		{
-#if 1
-		/* use 'dsaEncryption' OID for compatibility with other software
-		 * (PKCS #7 v1.5 does specify how to handle DSA) ... */
-		p7i->digest_enc_alg->algorithm=OBJ_nid2obj(NID_dsa);
-#else
-		/* ... although the 'dsaWithSHA1' OID (as required by RFC 2630 for CMS)
-		 * would make more sense. */
-		p7i->digest_enc_alg->algorithm=OBJ_nid2obj(NID_dsaWithSHA1);
-#endif
-		p7i->digest_enc_alg->parameter = NULL; /* special case for DSA: omit 'parameter'! */
-		}
-	else if (nid == EVP_PKEY_EC)
-		{
-		p7i->digest_enc_alg->algorithm=OBJ_nid2obj(NID_ecdsa_with_SHA1);
-		if (!(p7i->digest_enc_alg->parameter=ASN1_TYPE_new()))
-			goto err;
-		p7i->digest_enc_alg->parameter->type=V_ASN1_NULL;
-		}
-	else
-		return(0);
-
-	return(1);
-err:
-	return(0);
-	}
-
-PKCS7_SIGNER_INFO *PKCS7_add_signature(PKCS7 *p7, X509 *x509, EVP_PKEY *pkey,
-	     const EVP_MD *dgst)
-	{
-	PKCS7_SIGNER_INFO *si;
-
-	if ((si=PKCS7_SIGNER_INFO_new()) == NULL) goto err;
-	if (!PKCS7_SIGNER_INFO_set(si,x509,pkey,dgst)) goto err;
-	if (!PKCS7_add_signer(p7,si)) goto err;
-	return(si);
-err:
-	PKCS7_SIGNER_INFO_free(si);
-	return(NULL);
-	}
-
-int PKCS7_set_digest(PKCS7 *p7, const EVP_MD *md)
-	{
-	if (PKCS7_type_is_digest(p7))
-		{
-		if(!(p7->d.digest->md->parameter = ASN1_TYPE_new()))
-			{
-			PKCS7err(PKCS7_F_PKCS7_SET_DIGEST,ERR_R_MALLOC_FAILURE);
-			return 0;
-			}
-		p7->d.digest->md->parameter->type = V_ASN1_NULL;
-		p7->d.digest->md->algorithm = OBJ_nid2obj(EVP_MD_nid(md));
-		return 1;
-		}
-		
-	PKCS7err(PKCS7_F_PKCS7_SET_DIGEST,PKCS7_R_WRONG_CONTENT_TYPE);
-	return 1;
-	}
-
-STACK_OF(PKCS7_SIGNER_INFO) *PKCS7_get_signer_info(PKCS7 *p7)
-	{
-	if (PKCS7_type_is_signed(p7))
-		{
-		return(p7->d.sign->signer_info);
-		}
-	else if (PKCS7_type_is_signedAndEnveloped(p7))
-		{
-		return(p7->d.signed_and_enveloped->signer_info);
-		}
-	else
-		return(NULL);
-	}
-
-PKCS7_RECIP_INFO *PKCS7_add_recipient(PKCS7 *p7, X509 *x509)
-	{
-	PKCS7_RECIP_INFO *ri;
-
-	if ((ri=PKCS7_RECIP_INFO_new()) == NULL) goto err;
-	if (!PKCS7_RECIP_INFO_set(ri,x509)) goto err;
-	if (!PKCS7_add_recipient_info(p7,ri)) goto err;
-	return(ri);
-err:
-	PKCS7_RECIP_INFO_free(ri);
-	return(NULL);
-	}
-
-int PKCS7_add_recipient_info(PKCS7 *p7, PKCS7_RECIP_INFO *ri)
-	{
-	int i;
-	STACK_OF(PKCS7_RECIP_INFO) *sk;
-
-	i=OBJ_obj2nid(p7->type);
-	switch (i)
-		{
-	case NID_pkcs7_signedAndEnveloped:
-		sk=	p7->d.signed_and_enveloped->recipientinfo;
-		break;
-	case NID_pkcs7_enveloped:
-		sk=	p7->d.enveloped->recipientinfo;
-		break;
-	default:
-		PKCS7err(PKCS7_F_PKCS7_ADD_RECIPIENT_INFO,PKCS7_R_WRONG_CONTENT_TYPE);
-		return(0);
-		}
-
-	if (!sk_PKCS7_RECIP_INFO_push(sk,ri))
-		return 0;
-	return(1);
-	}
-
-int PKCS7_RECIP_INFO_set(PKCS7_RECIP_INFO *p7i, X509 *x509)
-	{
-	if (!ASN1_INTEGER_set(p7i->version,0))
-		return 0;
-	if (!X509_NAME_set(&p7i->issuer_and_serial->issuer,
-		X509_get_issuer_name(x509)))
-		return 0;
-
-	M_ASN1_INTEGER_free(p7i->issuer_and_serial->serial);
-	if (!(p7i->issuer_and_serial->serial=
-		M_ASN1_INTEGER_dup(X509_get_serialNumber(x509))))
-		return 0;
-
-	X509_ALGOR_free(p7i->key_enc_algor);
-	if (!(p7i->key_enc_algor= X509_ALGOR_dup(x509->cert_info->key->algor)))
-		return 0;
-
-	CRYPTO_add(&x509->references,1,CRYPTO_LOCK_X509);
-	p7i->cert=x509;
-
-	return(1);
-	}
-
-X509 *PKCS7_cert_from_signer_info(PKCS7 *p7, PKCS7_SIGNER_INFO *si)
-	{
-	if (PKCS7_type_is_signed(p7))
-		return(X509_find_by_issuer_and_serial(p7->d.sign->cert,
-			si->issuer_and_serial->issuer,
-			si->issuer_and_serial->serial));
-	else
-		return(NULL);
-	}
-
-int PKCS7_set_cipher(PKCS7 *p7, const EVP_CIPHER *cipher)
-	{
-	int i;
-	ASN1_OBJECT *objtmp;
-	PKCS7_ENC_CONTENT *ec;
-
-	i=OBJ_obj2nid(p7->type);
-	switch (i)
-		{
-	case NID_pkcs7_signedAndEnveloped:
-		ec=p7->d.signed_and_enveloped->enc_data;
-		break;
-	case NID_pkcs7_enveloped:
-		ec=p7->d.enveloped->enc_data;
-		break;
-	default:
-		PKCS7err(PKCS7_F_PKCS7_SET_CIPHER,PKCS7_R_WRONG_CONTENT_TYPE);
-		return(0);
-		}
-
-	/* Check cipher OID exists and has data in it*/
-	i = EVP_CIPHER_type(cipher);
-	if(i == NID_undef) {
-		PKCS7err(PKCS7_F_PKCS7_SET_CIPHER,PKCS7_R_CIPHER_HAS_NO_OBJECT_IDENTIFIER);
-		return(0);
-	}
-	objtmp = OBJ_nid2obj(i);
-
-	ec->cipher = cipher;
-	return 1;
-	}
-
diff --git a/crypto/openssl/crypto/pkcs7/pk7_mime.c b/crypto/openssl/crypto/pkcs7/pk7_mime.c
deleted file mode 100644
index 134746c1864f..000000000000
--- a/crypto/openssl/crypto/pkcs7/pk7_mime.c
+++ /dev/null
@@ -1,773 +0,0 @@
-/* pk7_mime.c */
-/* Written by Dr Stephen N Henson (shenson@bigfoot.com) for the OpenSSL
- * project.
- */
-/* ====================================================================
- * Copyright (c) 1999-2005 The OpenSSL Project.  All rights reserved.
- *
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions
- * are met:
- *
- * 1. Redistributions of source code must retain the above copyright
- *    notice, this list of conditions and the following disclaimer. 
- *
- * 2. Redistributions in binary form must reproduce the above copyright
- *    notice, this list of conditions and the following disclaimer in
- *    the documentation and/or other materials provided with the
- *    distribution.
- *
- * 3. All advertising materials mentioning features or use of this
- *    software must display the following acknowledgment:
- *    "This product includes software developed by the OpenSSL Project
- *    for use in the OpenSSL Toolkit. (http://www.OpenSSL.org/)"
- *
- * 4. The names "OpenSSL Toolkit" and "OpenSSL Project" must not be used to
- *    endorse or promote products derived from this software without
- *    prior written permission. For written permission, please contact
- *    licensing@OpenSSL.org.
- *
- * 5. Products derived from this software may not be called "OpenSSL"
- *    nor may "OpenSSL" appear in their names without prior written
- *    permission of the OpenSSL Project.
- *
- * 6. Redistributions of any form whatsoever must retain the following
- *    acknowledgment:
- *    "This product includes software developed by the OpenSSL Project
- *    for use in the OpenSSL Toolkit (http://www.OpenSSL.org/)"
- *
- * THIS SOFTWARE IS PROVIDED BY THE OpenSSL PROJECT ``AS IS'' AND ANY
- * EXPRESSED OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
- * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR
- * PURPOSE ARE DISCLAIMED.  IN NO EVENT SHALL THE OpenSSL PROJECT OR
- * ITS CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
- * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
- * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
- * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
- * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
- * STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
- * ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED
- * OF THE POSSIBILITY OF SUCH DAMAGE.
- * ====================================================================
- *
- * This product includes cryptographic software written by Eric Young
- * (eay@cryptsoft.com).  This product includes software written by Tim
- * Hudson (tjh@cryptsoft.com).
- *
- */
-
-#include <stdio.h>
-#include <ctype.h>
-#include "cryptlib.h"
-#include <openssl/rand.h>
-#include <openssl/x509.h>
-
-/* MIME and related routines */
-
-/* MIME format structures
- * Note that all are translated to lower case apart from
- * parameter values. Quotes are stripped off
- */
-
-typedef struct {
-char *param_name;			/* Param name e.g. "micalg" */
-char *param_value;			/* Param value e.g. "sha1" */
-} MIME_PARAM;
-
-DECLARE_STACK_OF(MIME_PARAM)
-IMPLEMENT_STACK_OF(MIME_PARAM)
-
-typedef struct {
-char *name;				/* Name of line e.g. "content-type" */
-char *value;				/* Value of line e.g. "text/plain" */
-STACK_OF(MIME_PARAM) *params;		/* Zero or more parameters */
-} MIME_HEADER;
-
-DECLARE_STACK_OF(MIME_HEADER)
-IMPLEMENT_STACK_OF(MIME_HEADER)
-
-static int pkcs7_output_data(BIO *bio, BIO *data, PKCS7 *p7, int flags);
-static int B64_write_PKCS7(BIO *bio, PKCS7 *p7);
-static PKCS7 *B64_read_PKCS7(BIO *bio);
-static char * strip_ends(char *name);
-static char * strip_start(char *name);
-static char * strip_end(char *name);
-static MIME_HEADER *mime_hdr_new(char *name, char *value);
-static int mime_hdr_addparam(MIME_HEADER *mhdr, char *name, char *value);
-static STACK_OF(MIME_HEADER) *mime_parse_hdr(BIO *bio);
-static int mime_hdr_cmp(const MIME_HEADER * const *a,
-			const MIME_HEADER * const *b);
-static int mime_param_cmp(const MIME_PARAM * const *a,
-			const MIME_PARAM * const *b);
-static void mime_param_free(MIME_PARAM *param);
-static int mime_bound_check(char *line, int linelen, char *bound, int blen);
-static int multi_split(BIO *bio, char *bound, STACK_OF(BIO) **ret);
-static int strip_eol(char *linebuf, int *plen);
-static MIME_HEADER *mime_hdr_find(STACK_OF(MIME_HEADER) *hdrs, char *name);
-static MIME_PARAM *mime_param_find(MIME_HEADER *hdr, char *name);
-static void mime_hdr_free(MIME_HEADER *hdr);
-
-#define MAX_SMLEN 1024
-#define mime_debug(x) /* x */
-
-/* Base 64 read and write of PKCS#7 structure */
-
-static int B64_write_PKCS7(BIO *bio, PKCS7 *p7)
-{
-	BIO *b64;
-	if(!(b64 = BIO_new(BIO_f_base64()))) {
-		PKCS7err(PKCS7_F_B64_WRITE_PKCS7,ERR_R_MALLOC_FAILURE);
-		return 0;
-	}
-	bio = BIO_push(b64, bio);
-	i2d_PKCS7_bio(bio, p7);
-	BIO_flush(bio);
-	bio = BIO_pop(bio);
-	BIO_free(b64);
-	return 1;
-}
-
-static PKCS7 *B64_read_PKCS7(BIO *bio)
-{
-	BIO *b64;
-	PKCS7 *p7;
-	if(!(b64 = BIO_new(BIO_f_base64()))) {
-		PKCS7err(PKCS7_F_B64_READ_PKCS7,ERR_R_MALLOC_FAILURE);
-		return 0;
-	}
-	bio = BIO_push(b64, bio);
-	if(!(p7 = d2i_PKCS7_bio(bio, NULL))) 
-		PKCS7err(PKCS7_F_B64_READ_PKCS7,PKCS7_R_DECODE_ERROR);
-	BIO_flush(bio);
-	bio = BIO_pop(bio);
-	BIO_free(b64);
-	return p7;
-}
-
-/* SMIME sender */
-
-int SMIME_write_PKCS7(BIO *bio, PKCS7 *p7, BIO *data, int flags)
-{
-	char bound[33], c;
-	int i;
-	char *mime_prefix, *mime_eol, *msg_type=NULL;
-	if (flags & PKCS7_NOOLDMIMETYPE)
-		mime_prefix = "application/pkcs7-";
-	else
-		mime_prefix = "application/x-pkcs7-";
-
-	if (flags & PKCS7_CRLFEOL)
-		mime_eol = "\r\n";
-	else
-		mime_eol = "\n";
-	if((flags & PKCS7_DETACHED) && data) {
-	/* We want multipart/signed */
-		/* Generate a random boundary */
-		RAND_pseudo_bytes((unsigned char *)bound, 32);
-		for(i = 0; i < 32; i++) {
-			c = bound[i] & 0xf;
-			if(c < 10) c += '0';
-			else c += 'A' - 10;
-			bound[i] = c;
-		}
-		bound[32] = 0;
-		BIO_printf(bio, "MIME-Version: 1.0%s", mime_eol);
-		BIO_printf(bio, "Content-Type: multipart/signed;");
-		BIO_printf(bio, " protocol=\"%ssignature\";", mime_prefix);
-		BIO_printf(bio, " micalg=sha1; boundary=\"----%s\"%s%s",
-						bound, mime_eol, mime_eol);
-		BIO_printf(bio, "This is an S/MIME signed message%s%s",
-						mime_eol, mime_eol);
-		/* Now write out the first part */
-		BIO_printf(bio, "------%s%s", bound, mime_eol);
-		pkcs7_output_data(bio, data, p7, flags);
-		BIO_printf(bio, "%s------%s%s", mime_eol, bound, mime_eol);
-
-		/* Headers for signature */
-
-		BIO_printf(bio, "Content-Type: %ssignature;", mime_prefix); 
-		BIO_printf(bio, " name=\"smime.p7s\"%s", mime_eol);
-		BIO_printf(bio, "Content-Transfer-Encoding: base64%s",
-								mime_eol);
-		BIO_printf(bio, "Content-Disposition: attachment;");
-		BIO_printf(bio, " filename=\"smime.p7s\"%s%s",
-							mime_eol, mime_eol);
-		B64_write_PKCS7(bio, p7);
-		BIO_printf(bio,"%s------%s--%s%s", mime_eol, bound,
-							mime_eol, mime_eol);
-		return 1;
-	}
-
-	/* Determine smime-type header */
-
-	if (PKCS7_type_is_enveloped(p7))
-		msg_type = "enveloped-data";
-	else if (PKCS7_type_is_signed(p7))
-		{
-		/* If we have any signers it is signed-data othewise 
-		 * certs-only.
-		 */
-		STACK_OF(PKCS7_SIGNER_INFO) *sinfos;
-		sinfos = PKCS7_get_signer_info(p7);
-		if (sk_PKCS7_SIGNER_INFO_num(sinfos) > 0)
-			msg_type = "signed-data";
-		else
-			msg_type = "certs-only";
-		}
-	/* MIME headers */
-	BIO_printf(bio, "MIME-Version: 1.0%s", mime_eol);
-	BIO_printf(bio, "Content-Disposition: attachment;");
-	BIO_printf(bio, " filename=\"smime.p7m\"%s", mime_eol);
-	BIO_printf(bio, "Content-Type: %smime;", mime_prefix);
-	if (msg_type)
-		BIO_printf(bio, " smime-type=%s;", msg_type);
-	BIO_printf(bio, " name=\"smime.p7m\"%s", mime_eol);
-	BIO_printf(bio, "Content-Transfer-Encoding: base64%s%s",
-						mime_eol, mime_eol);
-	B64_write_PKCS7(bio, p7);
-	BIO_printf(bio, "%s", mime_eol);
-	return 1;
-}
-
-/* Handle output of PKCS#7 data */
-
-
-static int pkcs7_output_data(BIO *out, BIO *data, PKCS7 *p7, int flags)
-	{
-	BIO *tmpbio, *p7bio;
-
-	if (!(flags & PKCS7_STREAM))
-		{
-		SMIME_crlf_copy(data, out, flags);
-		return 1;
-		}
-
-	/* Partial sign operation */
-
-	/* Initialize sign operation */
-	p7bio = PKCS7_dataInit(p7, out);
-
-	/* Copy data across, computing digests etc */
-	SMIME_crlf_copy(data, p7bio, flags);
-
-	/* Must be detached */
-	PKCS7_set_detached(p7, 1);
-
-	/* Finalize signatures */
-	PKCS7_dataFinal(p7, p7bio);
-
-	/* Now remove any digests prepended to the BIO */
-
-	while (p7bio != out)
-		{
-		tmpbio = BIO_pop(p7bio);
-		BIO_free(p7bio);
-		p7bio = tmpbio;
-		}
-
-	return 1;
-
-	}
-
-/* SMIME reader: handle multipart/signed and opaque signing.
- * in multipart case the content is placed in a memory BIO
- * pointed to by "bcont". In opaque this is set to NULL
- */
-
-PKCS7 *SMIME_read_PKCS7(BIO *bio, BIO **bcont)
-{
-	BIO *p7in;
-	STACK_OF(MIME_HEADER) *headers = NULL;
-	STACK_OF(BIO) *parts = NULL;
-	MIME_HEADER *hdr;
-	MIME_PARAM *prm;
-	PKCS7 *p7;
-	int ret;
-
-	if(bcont) *bcont = NULL;
-
-	if (!(headers = mime_parse_hdr(bio))) {
-		PKCS7err(PKCS7_F_SMIME_READ_PKCS7,PKCS7_R_MIME_PARSE_ERROR);
-		return NULL;
-	}
-
-	if(!(hdr = mime_hdr_find(headers, "content-type")) || !hdr->value) {
-		sk_MIME_HEADER_pop_free(headers, mime_hdr_free);
-		PKCS7err(PKCS7_F_SMIME_READ_PKCS7, PKCS7_R_NO_CONTENT_TYPE);
-		return NULL;
-	}
-
-	/* Handle multipart/signed */
-
-	if(!strcmp(hdr->value, "multipart/signed")) {
-		/* Split into two parts */
-		prm = mime_param_find(hdr, "boundary");
-		if(!prm || !prm->param_value) {
-			sk_MIME_HEADER_pop_free(headers, mime_hdr_free);
-			PKCS7err(PKCS7_F_SMIME_READ_PKCS7, PKCS7_R_NO_MULTIPART_BOUNDARY);
-			return NULL;
-		}
-		ret = multi_split(bio, prm->param_value, &parts);
-		sk_MIME_HEADER_pop_free(headers, mime_hdr_free);
-		if(!ret || (sk_BIO_num(parts) != 2) ) {
-			PKCS7err(PKCS7_F_SMIME_READ_PKCS7, PKCS7_R_NO_MULTIPART_BODY_FAILURE);
-			sk_BIO_pop_free(parts, BIO_vfree);
-			return NULL;
-		}
-
-		/* Parse the signature piece */
-		p7in = sk_BIO_value(parts, 1);
-
-		if (!(headers = mime_parse_hdr(p7in))) {
-			PKCS7err(PKCS7_F_SMIME_READ_PKCS7,PKCS7_R_MIME_SIG_PARSE_ERROR);
-			sk_BIO_pop_free(parts, BIO_vfree);
-			return NULL;
-		}
-
-		/* Get content type */
-
-		if(!(hdr = mime_hdr_find(headers, "content-type")) ||
-								 !hdr->value) {
-			sk_MIME_HEADER_pop_free(headers, mime_hdr_free);
-			PKCS7err(PKCS7_F_SMIME_READ_PKCS7, PKCS7_R_NO_SIG_CONTENT_TYPE);
-			return NULL;
-		}
-
-		if(strcmp(hdr->value, "application/x-pkcs7-signature") &&
-			strcmp(hdr->value, "application/pkcs7-signature")) {
-			sk_MIME_HEADER_pop_free(headers, mime_hdr_free);
-			PKCS7err(PKCS7_F_SMIME_READ_PKCS7,PKCS7_R_SIG_INVALID_MIME_TYPE);
-			ERR_add_error_data(2, "type: ", hdr->value);
-			sk_BIO_pop_free(parts, BIO_vfree);
-			return NULL;
-		}
-		sk_MIME_HEADER_pop_free(headers, mime_hdr_free);
-		/* Read in PKCS#7 */
-		if(!(p7 = B64_read_PKCS7(p7in))) {
-			PKCS7err(PKCS7_F_SMIME_READ_PKCS7,PKCS7_R_PKCS7_SIG_PARSE_ERROR);
-			sk_BIO_pop_free(parts, BIO_vfree);
-			return NULL;
-		}
-
-		if(bcont) {
-			*bcont = sk_BIO_value(parts, 0);
-			BIO_free(p7in);
-			sk_BIO_free(parts);
-		} else sk_BIO_pop_free(parts, BIO_vfree);
-		return p7;
-	}
-		
-	/* OK, if not multipart/signed try opaque signature */
-
-	if (strcmp (hdr->value, "application/x-pkcs7-mime") &&
-	    strcmp (hdr->value, "application/pkcs7-mime")) {
-		PKCS7err(PKCS7_F_SMIME_READ_PKCS7,PKCS7_R_INVALID_MIME_TYPE);
-		ERR_add_error_data(2, "type: ", hdr->value);
-		sk_MIME_HEADER_pop_free(headers, mime_hdr_free);
-		return NULL;
-	}
-
-	sk_MIME_HEADER_pop_free(headers, mime_hdr_free);
-	
-	if(!(p7 = B64_read_PKCS7(bio))) {
-		PKCS7err(PKCS7_F_SMIME_READ_PKCS7, PKCS7_R_PKCS7_PARSE_ERROR);
-		return NULL;
-	}
-	return p7;
-
-}
-
-/* Copy text from one BIO to another making the output CRLF at EOL */
-int SMIME_crlf_copy(BIO *in, BIO *out, int flags)
-{
-	char eol;
-	int len;
-	char linebuf[MAX_SMLEN];
-	if(flags & PKCS7_BINARY) {
-		while((len = BIO_read(in, linebuf, MAX_SMLEN)) > 0)
-						BIO_write(out, linebuf, len);
-		return 1;
-	}
-	if(flags & PKCS7_TEXT)
-		BIO_printf(out, "Content-Type: text/plain\r\n\r\n");
-	while ((len = BIO_gets(in, linebuf, MAX_SMLEN)) > 0) {
-		eol = strip_eol(linebuf, &len);
-		if (len)
-			BIO_write(out, linebuf, len);
-		if(eol) BIO_write(out, "\r\n", 2);
-	}
-	return 1;
-}
-
-/* Strip off headers if they are text/plain */
-int SMIME_text(BIO *in, BIO *out)
-{
-	char iobuf[4096];
-	int len;
-	STACK_OF(MIME_HEADER) *headers;
-	MIME_HEADER *hdr;
-
-	if (!(headers = mime_parse_hdr(in))) {
-		PKCS7err(PKCS7_F_SMIME_TEXT,PKCS7_R_MIME_PARSE_ERROR);
-		return 0;
-	}
-	if(!(hdr = mime_hdr_find(headers, "content-type")) || !hdr->value) {
-		PKCS7err(PKCS7_F_SMIME_TEXT,PKCS7_R_MIME_NO_CONTENT_TYPE);
-		sk_MIME_HEADER_pop_free(headers, mime_hdr_free);
-		return 0;
-	}
-	if (strcmp (hdr->value, "text/plain")) {
-		PKCS7err(PKCS7_F_SMIME_TEXT,PKCS7_R_INVALID_MIME_TYPE);
-		ERR_add_error_data(2, "type: ", hdr->value);
-		sk_MIME_HEADER_pop_free(headers, mime_hdr_free);
-		return 0;
-	}
-	sk_MIME_HEADER_pop_free(headers, mime_hdr_free);
-	while ((len = BIO_read(in, iobuf, sizeof(iobuf))) > 0)
-						BIO_write(out, iobuf, len);
-	return 1;
-}
-
-/* Split a multipart/XXX message body into component parts: result is
- * canonical parts in a STACK of bios
- */
-
-static int multi_split(BIO *bio, char *bound, STACK_OF(BIO) **ret)
-{
-	char linebuf[MAX_SMLEN];
-	int len, blen;
-	int eol = 0, next_eol = 0;
-	BIO *bpart = NULL;
-	STACK_OF(BIO) *parts;
-	char state, part, first;
-
-	blen = strlen(bound);
-	part = 0;
-	state = 0;
-	first = 1;
-	parts = sk_BIO_new_null();
-	*ret = parts;
-	while ((len = BIO_gets(bio, linebuf, MAX_SMLEN)) > 0) {
-		state = mime_bound_check(linebuf, len, bound, blen);
-		if(state == 1) {
-			first = 1;
-			part++;
-		} else if(state == 2) {
-			sk_BIO_push(parts, bpart);
-			return 1;
-		} else if(part) {
-			/* Strip CR+LF from linebuf */
-			next_eol = strip_eol(linebuf, &len);
-			if(first) {
-				first = 0;
-				if(bpart) sk_BIO_push(parts, bpart);
-				bpart = BIO_new(BIO_s_mem());
-				BIO_set_mem_eof_return(bpart, 0);
-			} else if (eol)
-				BIO_write(bpart, "\r\n", 2);
-			eol = next_eol;
-			if (len)
-				BIO_write(bpart, linebuf, len);
-		}
-	}
-	return 0;
-}
-
-/* This is the big one: parse MIME header lines up to message body */
-
-#define MIME_INVALID	0
-#define MIME_START	1
-#define MIME_TYPE	2
-#define MIME_NAME	3
-#define MIME_VALUE	4
-#define MIME_QUOTE	5
-#define MIME_COMMENT	6
-
-
-static STACK_OF(MIME_HEADER) *mime_parse_hdr(BIO *bio)
-{
-	char *p, *q, c;
-	char *ntmp;
-	char linebuf[MAX_SMLEN];
-	MIME_HEADER *mhdr = NULL;
-	STACK_OF(MIME_HEADER) *headers;
-	int len, state, save_state = 0;
-
-	headers = sk_MIME_HEADER_new(mime_hdr_cmp);
-	while ((len = BIO_gets(bio, linebuf, MAX_SMLEN)) > 0) {
-	/* If whitespace at line start then continuation line */
-	if(mhdr && isspace((unsigned char)linebuf[0])) state = MIME_NAME;
-	else state = MIME_START;
-	ntmp = NULL;
-	/* Go through all characters */
-	for(p = linebuf, q = linebuf; (c = *p) && (c!='\r') && (c!='\n'); p++) {
-
-	/* State machine to handle MIME headers
-	 * if this looks horrible that's because it *is*
-         */
-
-		switch(state) {
-			case MIME_START:
-			if(c == ':') {
-				state = MIME_TYPE;
-				*p = 0;
-				ntmp = strip_ends(q);
-				q = p + 1;
-			}
-			break;
-
-			case MIME_TYPE:
-			if(c == ';') {
-				mime_debug("Found End Value\n");
-				*p = 0;
-				mhdr = mime_hdr_new(ntmp, strip_ends(q));
-				sk_MIME_HEADER_push(headers, mhdr);
-				ntmp = NULL;
-				q = p + 1;
-				state = MIME_NAME;
-			} else if(c == '(') {
-				save_state = state;
-				state = MIME_COMMENT;
-			}
-			break;
-
-			case MIME_COMMENT:
-			if(c == ')') {
-				state = save_state;
-			}
-			break;
-
-			case MIME_NAME:
-			if(c == '=') {
-				state = MIME_VALUE;
-				*p = 0;
-				ntmp = strip_ends(q);
-				q = p + 1;
-			}
-			break ;
-
-			case MIME_VALUE:
-			if(c == ';') {
-				state = MIME_NAME;
-				*p = 0;
-				mime_hdr_addparam(mhdr, ntmp, strip_ends(q));
-				ntmp = NULL;
-				q = p + 1;
-			} else if (c == '"') {
-				mime_debug("Found Quote\n");
-				state = MIME_QUOTE;
-			} else if(c == '(') {
-				save_state = state;
-				state = MIME_COMMENT;
-			}
-			break;
-
-			case MIME_QUOTE:
-			if(c == '"') {
-				mime_debug("Found Match Quote\n");
-				state = MIME_VALUE;
-			}
-			break;
-		}
-	}
-
-	if(state == MIME_TYPE) {
-		mhdr = mime_hdr_new(ntmp, strip_ends(q));
-		sk_MIME_HEADER_push(headers, mhdr);
-	} else if(state == MIME_VALUE)
-			 mime_hdr_addparam(mhdr, ntmp, strip_ends(q));
-	if(p == linebuf) break;	/* Blank line means end of headers */
-}
-
-return headers;
-
-}
-
-static char *strip_ends(char *name)
-{
-	return strip_end(strip_start(name));
-}
-
-/* Strip a parameter of whitespace from start of param */
-static char *strip_start(char *name)
-{
-	char *p, c;
-	/* Look for first non white space or quote */
-	for(p = name; (c = *p) ;p++) {
-		if(c == '"') {
-			/* Next char is start of string if non null */
-			if(p[1]) return p + 1;
-			/* Else null string */
-			return NULL;
-		}
-		if(!isspace((unsigned char)c)) return p;
-	}
-	return NULL;
-}
-
-/* As above but strip from end of string : maybe should handle brackets? */
-static char *strip_end(char *name)
-{
-	char *p, c;
-	if(!name) return NULL;
-	/* Look for first non white space or quote */
-	for(p = name + strlen(name) - 1; p >= name ;p--) {
-		c = *p;
-		if(c == '"') {
-			if(p - 1 == name) return NULL;
-			*p = 0;
-			return name;
-		}
-		if(isspace((unsigned char)c)) *p = 0;	
-		else return name;
-	}
-	return NULL;
-}
-
-static MIME_HEADER *mime_hdr_new(char *name, char *value)
-{
-	MIME_HEADER *mhdr;
-	char *tmpname, *tmpval, *p;
-	int c;
-	if(name) {
-		if(!(tmpname = BUF_strdup(name))) return NULL;
-		for(p = tmpname ; *p; p++) {
-			c = *p;
-			if(isupper(c)) {
-				c = tolower(c);
-				*p = c;
-			}
-		}
-	} else tmpname = NULL;
-	if(value) {
-		if(!(tmpval = BUF_strdup(value))) return NULL;
-		for(p = tmpval ; *p; p++) {
-			c = *p;
-			if(isupper(c)) {
-				c = tolower(c);
-				*p = c;
-			}
-		}
-	} else tmpval = NULL;
-	mhdr = (MIME_HEADER *) OPENSSL_malloc(sizeof(MIME_HEADER));
-	if(!mhdr) return NULL;
-	mhdr->name = tmpname;
-	mhdr->value = tmpval;
-	if(!(mhdr->params = sk_MIME_PARAM_new(mime_param_cmp))) return NULL;
-	return mhdr;
-}
-		
-static int mime_hdr_addparam(MIME_HEADER *mhdr, char *name, char *value)
-{
-	char *tmpname, *tmpval, *p;
-	int c;
-	MIME_PARAM *mparam;
-	if(name) {
-		tmpname = BUF_strdup(name);
-		if(!tmpname) return 0;
-		for(p = tmpname ; *p; p++) {
-			c = *p;
-			if(isupper(c)) {
-				c = tolower(c);
-				*p = c;
-			}
-		}
-	} else tmpname = NULL;
-	if(value) {
-		tmpval = BUF_strdup(value);
-		if(!tmpval) return 0;
-	} else tmpval = NULL;
-	/* Parameter values are case sensitive so leave as is */
-	mparam = (MIME_PARAM *) OPENSSL_malloc(sizeof(MIME_PARAM));
-	if(!mparam) return 0;
-	mparam->param_name = tmpname;
-	mparam->param_value = tmpval;
-	sk_MIME_PARAM_push(mhdr->params, mparam);
-	return 1;
-}
-
-static int mime_hdr_cmp(const MIME_HEADER * const *a,
-			const MIME_HEADER * const *b)
-{
-	return(strcmp((*a)->name, (*b)->name));
-}
-
-static int mime_param_cmp(const MIME_PARAM * const *a,
-			const MIME_PARAM * const *b)
-{
-	return(strcmp((*a)->param_name, (*b)->param_name));
-}
-
-/* Find a header with a given name (if possible) */
-
-static MIME_HEADER *mime_hdr_find(STACK_OF(MIME_HEADER) *hdrs, char *name)
-{
-	MIME_HEADER htmp;
-	int idx;
-	htmp.name = name;
-	idx = sk_MIME_HEADER_find(hdrs, &htmp);
-	if(idx < 0) return NULL;
-	return sk_MIME_HEADER_value(hdrs, idx);
-}
-
-static MIME_PARAM *mime_param_find(MIME_HEADER *hdr, char *name)
-{
-	MIME_PARAM param;
-	int idx;
-	param.param_name = name;
-	idx = sk_MIME_PARAM_find(hdr->params, &param);
-	if(idx < 0) return NULL;
-	return sk_MIME_PARAM_value(hdr->params, idx);
-}
-
-static void mime_hdr_free(MIME_HEADER *hdr)
-{
-	if(hdr->name) OPENSSL_free(hdr->name);
-	if(hdr->value) OPENSSL_free(hdr->value);
-	if(hdr->params) sk_MIME_PARAM_pop_free(hdr->params, mime_param_free);
-	OPENSSL_free(hdr);
-}
-
-static void mime_param_free(MIME_PARAM *param)
-{
-	if(param->param_name) OPENSSL_free(param->param_name);
-	if(param->param_value) OPENSSL_free(param->param_value);
-	OPENSSL_free(param);
-}
-
-/* Check for a multipart boundary. Returns:
- * 0 : no boundary
- * 1 : part boundary
- * 2 : final boundary
- */
-static int mime_bound_check(char *line, int linelen, char *bound, int blen)
-{
-	if(linelen == -1) linelen = strlen(line);
-	if(blen == -1) blen = strlen(bound);
-	/* Quickly eliminate if line length too short */
-	if(blen + 2 > linelen) return 0;
-	/* Check for part boundary */
-	if(!strncmp(line, "--", 2) && !strncmp(line + 2, bound, blen)) {
-		if(!strncmp(line + blen + 2, "--", 2)) return 2;
-		else return 1;
-	}
-	return 0;
-}
-
-static int strip_eol(char *linebuf, int *plen)
-	{
-	int len = *plen;
-	char *p, c;
-	int is_eol = 0;
-	p = linebuf + len - 1;
-	for (p = linebuf + len - 1; len > 0; len--, p--)
-		{
-		c = *p;
-		if (c == '\n')
-			is_eol = 1;
-		else if (c != '\r')
-			break;
-		}
-	*plen = len;
-	return is_eol;
-	}
diff --git a/crypto/openssl/crypto/pkcs7/pk7_smime.c b/crypto/openssl/crypto/pkcs7/pk7_smime.c
deleted file mode 100644
index fab85137b789..000000000000
--- a/crypto/openssl/crypto/pkcs7/pk7_smime.c
+++ /dev/null
@@ -1,500 +0,0 @@
-/* pk7_smime.c */
-/* Written by Dr Stephen N Henson (shenson@bigfoot.com) for the OpenSSL
- * project.
- */
-/* ====================================================================
- * Copyright (c) 1999-2004 The OpenSSL Project.  All rights reserved.
- *
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions
- * are met:
- *
- * 1. Redistributions of source code must retain the above copyright
- *    notice, this list of conditions and the following disclaimer. 
- *
- * 2. Redistributions in binary form must reproduce the above copyright
- *    notice, this list of conditions and the following disclaimer in
- *    the documentation and/or other materials provided with the
- *    distribution.
- *
- * 3. All advertising materials mentioning features or use of this
- *    software must display the following acknowledgment:
- *    "This product includes software developed by the OpenSSL Project
- *    for use in the OpenSSL Toolkit. (http://www.OpenSSL.org/)"
- *
- * 4. The names "OpenSSL Toolkit" and "OpenSSL Project" must not be used to
- *    endorse or promote products derived from this software without
- *    prior written permission. For written permission, please contact
- *    licensing@OpenSSL.org.
- *
- * 5. Products derived from this software may not be called "OpenSSL"
- *    nor may "OpenSSL" appear in their names without prior written
- *    permission of the OpenSSL Project.
- *
- * 6. Redistributions of any form whatsoever must retain the following
- *    acknowledgment:
- *    "This product includes software developed by the OpenSSL Project
- *    for use in the OpenSSL Toolkit (http://www.OpenSSL.org/)"
- *
- * THIS SOFTWARE IS PROVIDED BY THE OpenSSL PROJECT ``AS IS'' AND ANY
- * EXPRESSED OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
- * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR
- * PURPOSE ARE DISCLAIMED.  IN NO EVENT SHALL THE OpenSSL PROJECT OR
- * ITS CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
- * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
- * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
- * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
- * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
- * STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
- * ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED
- * OF THE POSSIBILITY OF SUCH DAMAGE.
- * ====================================================================
- *
- * This product includes cryptographic software written by Eric Young
- * (eay@cryptsoft.com).  This product includes software written by Tim
- * Hudson (tjh@cryptsoft.com).
- *
- */
-
-/* Simple PKCS#7 processing functions */
-
-#include <stdio.h>
-#include "cryptlib.h"
-#include <openssl/x509.h>
-#include <openssl/x509v3.h>
-
-PKCS7 *PKCS7_sign(X509 *signcert, EVP_PKEY *pkey, STACK_OF(X509) *certs,
-		  BIO *data, int flags)
-{
-	PKCS7 *p7 = NULL;
-	PKCS7_SIGNER_INFO *si;
-	BIO *p7bio = NULL;
-	STACK_OF(X509_ALGOR) *smcap = NULL;
-	int i;
-
-	if(!X509_check_private_key(signcert, pkey)) {
-		PKCS7err(PKCS7_F_PKCS7_SIGN,PKCS7_R_PRIVATE_KEY_DOES_NOT_MATCH_CERTIFICATE);
-                return NULL;
-	}
-
-	if(!(p7 = PKCS7_new())) {
-		PKCS7err(PKCS7_F_PKCS7_SIGN,ERR_R_MALLOC_FAILURE);
-		return NULL;
-	}
-
-	if (!PKCS7_set_type(p7, NID_pkcs7_signed))
-		goto err;
-
-	if (!PKCS7_content_new(p7, NID_pkcs7_data))
-		goto err;
-
-	if (!(si = PKCS7_add_signature(p7,signcert,pkey,EVP_sha1()))) {
-		PKCS7err(PKCS7_F_PKCS7_SIGN,PKCS7_R_PKCS7_ADD_SIGNATURE_ERROR);
-		goto err;
-	}
-
-	if(!(flags & PKCS7_NOCERTS)) {
-		if (!PKCS7_add_certificate(p7, signcert))
-			goto err;
-		if(certs) for(i = 0; i < sk_X509_num(certs); i++)
-			if (!PKCS7_add_certificate(p7, sk_X509_value(certs, i)))
-				goto err;
-	}
-
-	if(!(flags & PKCS7_NOATTR)) {
-		if (!PKCS7_add_signed_attribute(si, NID_pkcs9_contentType,
-				V_ASN1_OBJECT, OBJ_nid2obj(NID_pkcs7_data)))
-			goto err;
-		/* Add SMIMECapabilities */
-		if(!(flags & PKCS7_NOSMIMECAP))
-		{
-		if(!(smcap = sk_X509_ALGOR_new_null())) {
-			PKCS7err(PKCS7_F_PKCS7_SIGN,ERR_R_MALLOC_FAILURE);
-			goto err;
-		}
-#ifndef OPENSSL_NO_DES
-		if (!PKCS7_simple_smimecap (smcap, NID_des_ede3_cbc, -1))
-			goto err;
-#endif
-#ifndef OPENSSL_NO_RC2
-		if (!PKCS7_simple_smimecap (smcap, NID_rc2_cbc, 128))
-			goto err;
-		if (!PKCS7_simple_smimecap (smcap, NID_rc2_cbc, 64))
-			goto err;
-#endif
-#ifndef OPENSSL_NO_DES
-		if (!PKCS7_simple_smimecap (smcap, NID_des_cbc, -1))
-			goto err;
-#endif
-#ifndef OPENSSL_NO_RC2
-		if (!PKCS7_simple_smimecap (smcap, NID_rc2_cbc, 40))
-			goto err;
-#endif
-		if (!PKCS7_add_attrib_smimecap (si, smcap))
-			goto err;
-		sk_X509_ALGOR_pop_free(smcap, X509_ALGOR_free);
-		smcap = NULL;
-		}
-	}
-
-	if(flags & PKCS7_DETACHED)PKCS7_set_detached(p7, 1);
-
-	if (flags & PKCS7_STREAM)
-		return p7;
-
-
-	if (!(p7bio = PKCS7_dataInit(p7, NULL))) {
-		PKCS7err(PKCS7_F_PKCS7_SIGN,ERR_R_MALLOC_FAILURE);
-		goto err;
-	}
-
-	SMIME_crlf_copy(data, p7bio, flags);
-
-
-	if (!PKCS7_dataFinal(p7,p7bio)) {
-		PKCS7err(PKCS7_F_PKCS7_SIGN,PKCS7_R_PKCS7_DATASIGN);
-		goto err;
-	}
-
-	BIO_free_all(p7bio);
-	return p7;
-err:
-	sk_X509_ALGOR_pop_free(smcap, X509_ALGOR_free);
-	BIO_free_all(p7bio);
-	PKCS7_free(p7);
-	return NULL;
-}
-
-int PKCS7_verify(PKCS7 *p7, STACK_OF(X509) *certs, X509_STORE *store,
-					BIO *indata, BIO *out, int flags)
-{
-	STACK_OF(X509) *signers;
-	X509 *signer;
-	STACK_OF(PKCS7_SIGNER_INFO) *sinfos;
-	PKCS7_SIGNER_INFO *si;
-	X509_STORE_CTX cert_ctx;
-	char buf[4096];
-	int i, j=0, k, ret = 0;
-	BIO *p7bio;
-	BIO *tmpin, *tmpout;
-
-	if(!p7) {
-		PKCS7err(PKCS7_F_PKCS7_VERIFY,PKCS7_R_INVALID_NULL_POINTER);
-		return 0;
-	}
-
-	if(!PKCS7_type_is_signed(p7)) {
-		PKCS7err(PKCS7_F_PKCS7_VERIFY,PKCS7_R_WRONG_CONTENT_TYPE);
-		return 0;
-	}
-
-	/* Check for no data and no content: no data to verify signature */
-	if(PKCS7_get_detached(p7) && !indata) {
-		PKCS7err(PKCS7_F_PKCS7_VERIFY,PKCS7_R_NO_CONTENT);
-		return 0;
-	}
-#if 0
-	/* NB: this test commented out because some versions of Netscape
-	 * illegally include zero length content when signing data.
-	 */
-
-	/* Check for data and content: two sets of data */
-	if(!PKCS7_get_detached(p7) && indata) {
-				PKCS7err(PKCS7_F_PKCS7_VERIFY,PKCS7_R_CONTENT_AND_DATA_PRESENT);
-		return 0;
-	}
-#endif
-
-	sinfos = PKCS7_get_signer_info(p7);
-
-	if(!sinfos || !sk_PKCS7_SIGNER_INFO_num(sinfos)) {
-		PKCS7err(PKCS7_F_PKCS7_VERIFY,PKCS7_R_NO_SIGNATURES_ON_DATA);
-		return 0;
-	}
-
-
-	signers = PKCS7_get0_signers(p7, certs, flags);
-
-	if(!signers) return 0;
-
-	/* Now verify the certificates */
-
-	if (!(flags & PKCS7_NOVERIFY)) for (k = 0; k < sk_X509_num(signers); k++) {
-		signer = sk_X509_value (signers, k);
-		if (!(flags & PKCS7_NOCHAIN)) {
-			if(!X509_STORE_CTX_init(&cert_ctx, store, signer,
-							p7->d.sign->cert))
-				{
-				PKCS7err(PKCS7_F_PKCS7_VERIFY,ERR_R_X509_LIB);
-				sk_X509_free(signers);
-				return 0;
-				}
-			X509_STORE_CTX_set_purpose(&cert_ctx,
-						X509_PURPOSE_SMIME_SIGN);
-		} else if(!X509_STORE_CTX_init (&cert_ctx, store, signer, NULL)) {
-			PKCS7err(PKCS7_F_PKCS7_VERIFY,ERR_R_X509_LIB);
-			sk_X509_free(signers);
-			return 0;
-		}
-		if (!(flags & PKCS7_NOCRL))
-			X509_STORE_CTX_set0_crls(&cert_ctx, p7->d.sign->crl);
-		i = X509_verify_cert(&cert_ctx);
-		if (i <= 0) j = X509_STORE_CTX_get_error(&cert_ctx);
-		X509_STORE_CTX_cleanup(&cert_ctx);
-		if (i <= 0) {
-			PKCS7err(PKCS7_F_PKCS7_VERIFY,PKCS7_R_CERTIFICATE_VERIFY_ERROR);
-			ERR_add_error_data(2, "Verify error:",
-					 X509_verify_cert_error_string(j));
-			sk_X509_free(signers);
-			return 0;
-		}
-		/* Check for revocation status here */
-	}
-
-	/* Performance optimization: if the content is a memory BIO then
-	 * store its contents in a temporary read only memory BIO. This
-	 * avoids potentially large numbers of slow copies of data which will
-	 * occur when reading from a read write memory BIO when signatures
-	 * are calculated.
-	 */
-
-	if (indata && (BIO_method_type(indata) == BIO_TYPE_MEM))
-		{
-		char *ptr;
-		long len;
-		len = BIO_get_mem_data(indata, &ptr);
-		tmpin = BIO_new_mem_buf(ptr, len);
-		if (tmpin == NULL)
-			{
-			PKCS7err(PKCS7_F_PKCS7_VERIFY,ERR_R_MALLOC_FAILURE);
-			return 0;
-			}
-		}
-	else
-		tmpin = indata;
-		
-
-	if (!(p7bio=PKCS7_dataInit(p7,tmpin)))
-		goto err;
-
-	if(flags & PKCS7_TEXT) {
-		if(!(tmpout = BIO_new(BIO_s_mem()))) {
-			PKCS7err(PKCS7_F_PKCS7_VERIFY,ERR_R_MALLOC_FAILURE);
-			goto err;
-		}
-	} else tmpout = out;
-
-	/* We now have to 'read' from p7bio to calculate digests etc. */
-	for (;;)
-	{
-		i=BIO_read(p7bio,buf,sizeof(buf));
-		if (i <= 0) break;
-		if (tmpout) BIO_write(tmpout, buf, i);
-	}
-
-	if(flags & PKCS7_TEXT) {
-		if(!SMIME_text(tmpout, out)) {
-			PKCS7err(PKCS7_F_PKCS7_VERIFY,PKCS7_R_SMIME_TEXT_ERROR);
-			BIO_free(tmpout);
-			goto err;
-		}
-		BIO_free(tmpout);
-	}
-
-	/* Now Verify All Signatures */
-	if (!(flags & PKCS7_NOSIGS))
-	    for (i=0; i<sk_PKCS7_SIGNER_INFO_num(sinfos); i++)
-		{
-		si=sk_PKCS7_SIGNER_INFO_value(sinfos,i);
-		signer = sk_X509_value (signers, i);
-		j=PKCS7_signatureVerify(p7bio,p7,si, signer);
-		if (j <= 0) {
-			PKCS7err(PKCS7_F_PKCS7_VERIFY,PKCS7_R_SIGNATURE_FAILURE);
-			goto err;
-		}
-	}
-
-	ret = 1;
-
-	err:
-	
-	if (tmpin == indata)
-		{
-		if (indata) BIO_pop(p7bio);
-		}
-	BIO_free_all(p7bio);
-
-	sk_X509_free(signers);
-
-	return ret;
-}
-
-STACK_OF(X509) *PKCS7_get0_signers(PKCS7 *p7, STACK_OF(X509) *certs, int flags)
-{
-	STACK_OF(X509) *signers;
-	STACK_OF(PKCS7_SIGNER_INFO) *sinfos;
-	PKCS7_SIGNER_INFO *si;
-	PKCS7_ISSUER_AND_SERIAL *ias;
-	X509 *signer;
-	int i;
-
-	if(!p7) {
-		PKCS7err(PKCS7_F_PKCS7_GET0_SIGNERS,PKCS7_R_INVALID_NULL_POINTER);
-		return NULL;
-	}
-
-	if(!PKCS7_type_is_signed(p7)) {
-		PKCS7err(PKCS7_F_PKCS7_GET0_SIGNERS,PKCS7_R_WRONG_CONTENT_TYPE);
-		return NULL;
-	}
-
-	/* Collect all the signers together */
-
-	sinfos = PKCS7_get_signer_info(p7);
-
-	if(sk_PKCS7_SIGNER_INFO_num(sinfos) <= 0) {
-		PKCS7err(PKCS7_F_PKCS7_GET0_SIGNERS,PKCS7_R_NO_SIGNERS);
-		return NULL;
-	}
-
-	if(!(signers = sk_X509_new_null())) {
-		PKCS7err(PKCS7_F_PKCS7_GET0_SIGNERS,ERR_R_MALLOC_FAILURE);
-		return NULL;
-	}
-
-	for (i = 0; i < sk_PKCS7_SIGNER_INFO_num(sinfos); i++)
-	{
-	    si = sk_PKCS7_SIGNER_INFO_value(sinfos, i);
-	    ias = si->issuer_and_serial;
-	    signer = NULL;
-		/* If any certificates passed they take priority */
-	    if (certs) signer = X509_find_by_issuer_and_serial (certs,
-					 	ias->issuer, ias->serial);
-	    if (!signer && !(flags & PKCS7_NOINTERN)
-			&& p7->d.sign->cert) signer =
-		              X509_find_by_issuer_and_serial (p7->d.sign->cert,
-					      	ias->issuer, ias->serial);
-	    if (!signer) {
-			PKCS7err(PKCS7_F_PKCS7_GET0_SIGNERS,PKCS7_R_SIGNER_CERTIFICATE_NOT_FOUND);
-			sk_X509_free(signers);
-			return NULL;
-	    }
-
-	    if (!sk_X509_push(signers, signer)) {
-			sk_X509_free(signers);
-			return NULL;
-	    }
-	}
-	return signers;
-}
-
-
-/* Build a complete PKCS#7 enveloped data */
-
-PKCS7 *PKCS7_encrypt(STACK_OF(X509) *certs, BIO *in, const EVP_CIPHER *cipher,
-								int flags)
-{
-	PKCS7 *p7;
-	BIO *p7bio = NULL;
-	int i;
-	X509 *x509;
-	if(!(p7 = PKCS7_new())) {
-		PKCS7err(PKCS7_F_PKCS7_ENCRYPT,ERR_R_MALLOC_FAILURE);
-		return NULL;
-	}
-
-	if (!PKCS7_set_type(p7, NID_pkcs7_enveloped))
-		goto err;
-	if(!PKCS7_set_cipher(p7, cipher)) {
-		PKCS7err(PKCS7_F_PKCS7_ENCRYPT,PKCS7_R_ERROR_SETTING_CIPHER);
-		goto err;
-	}
-
-	for(i = 0; i < sk_X509_num(certs); i++) {
-		x509 = sk_X509_value(certs, i);
-		if(!PKCS7_add_recipient(p7, x509)) {
-			PKCS7err(PKCS7_F_PKCS7_ENCRYPT,
-					PKCS7_R_ERROR_ADDING_RECIPIENT);
-			goto err;
-		}
-	}
-
-	if(!(p7bio = PKCS7_dataInit(p7, NULL))) {
-		PKCS7err(PKCS7_F_PKCS7_ENCRYPT,ERR_R_MALLOC_FAILURE);
-		goto err;
-	}
-
-	SMIME_crlf_copy(in, p7bio, flags);
-
-	BIO_flush(p7bio);
-
-        if (!PKCS7_dataFinal(p7,p7bio)) {
-		PKCS7err(PKCS7_F_PKCS7_ENCRYPT,PKCS7_R_PKCS7_DATAFINAL_ERROR);
-		goto err;
-	}
-        BIO_free_all(p7bio);
-
-	return p7;
-
-	err:
-
-	BIO_free_all(p7bio);
-	PKCS7_free(p7);
-	return NULL;
-
-}
-
-int PKCS7_decrypt(PKCS7 *p7, EVP_PKEY *pkey, X509 *cert, BIO *data, int flags)
-{
-	BIO *tmpmem;
-	int ret, i;
-	char buf[4096];
-
-	if(!p7) {
-		PKCS7err(PKCS7_F_PKCS7_DECRYPT,PKCS7_R_INVALID_NULL_POINTER);
-		return 0;
-	}
-
-	if(!PKCS7_type_is_enveloped(p7)) {
-		PKCS7err(PKCS7_F_PKCS7_DECRYPT,PKCS7_R_WRONG_CONTENT_TYPE);
-		return 0;
-	}
-
-	if(cert && !X509_check_private_key(cert, pkey)) {
-		PKCS7err(PKCS7_F_PKCS7_DECRYPT,
-				PKCS7_R_PRIVATE_KEY_DOES_NOT_MATCH_CERTIFICATE);
-		return 0;
-	}
-
-	if(!(tmpmem = PKCS7_dataDecode(p7, pkey, NULL, cert))) {
-		PKCS7err(PKCS7_F_PKCS7_DECRYPT, PKCS7_R_DECRYPT_ERROR);
-		return 0;
-	}
-
-	if (flags & PKCS7_TEXT) {
-		BIO *tmpbuf, *bread;
-		/* Encrypt BIOs can't do BIO_gets() so add a buffer BIO */
-		if(!(tmpbuf = BIO_new(BIO_f_buffer()))) {
-			PKCS7err(PKCS7_F_PKCS7_DECRYPT, ERR_R_MALLOC_FAILURE);
-			BIO_free_all(tmpmem);
-			return 0;
-		}
-		if(!(bread = BIO_push(tmpbuf, tmpmem))) {
-			PKCS7err(PKCS7_F_PKCS7_DECRYPT, ERR_R_MALLOC_FAILURE);
-			BIO_free_all(tmpbuf);
-			BIO_free_all(tmpmem);
-			return 0;
-		}
-		ret = SMIME_text(bread, data);
-		BIO_free_all(bread);
-		return ret;
-	} else {
-		for(;;) {
-			i = BIO_read(tmpmem, buf, sizeof(buf));
-			if(i <= 0) break;
-			BIO_write(data, buf, i);
-		}
-		BIO_free_all(tmpmem);
-		return 1;
-	}
-}
diff --git a/crypto/openssl/crypto/pkcs7/pkcs7.h b/crypto/openssl/crypto/pkcs7/pkcs7.h
deleted file mode 100644
index cc092d262dc3..000000000000
--- a/crypto/openssl/crypto/pkcs7/pkcs7.h
+++ /dev/null
@@ -1,464 +0,0 @@
-/* crypto/pkcs7/pkcs7.h */
-/* Copyright (C) 1995-1998 Eric Young (eay@cryptsoft.com)
- * All rights reserved.
- *
- * This package is an SSL implementation written
- * by Eric Young (eay@cryptsoft.com).
- * The implementation was written so as to conform with Netscapes SSL.
- * 
- * This library is free for commercial and non-commercial use as long as
- * the following conditions are aheared to.  The following conditions
- * apply to all code found in this distribution, be it the RC4, RSA,
- * lhash, DES, etc., code; not just the SSL code.  The SSL documentation
- * included with this distribution is covered by the same copyright terms
- * except that the holder is Tim Hudson (tjh@cryptsoft.com).
- * 
- * Copyright remains Eric Young's, and as such any Copyright notices in
- * the code are not to be removed.
- * If this package is used in a product, Eric Young should be given attribution
- * as the author of the parts of the library used.
- * This can be in the form of a textual message at program startup or
- * in documentation (online or textual) provided with the package.
- * 
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions
- * are met:
- * 1. Redistributions of source code must retain the copyright
- *    notice, this list of conditions and the following disclaimer.
- * 2. Redistributions in binary form must reproduce the above copyright
- *    notice, this list of conditions and the following disclaimer in the
- *    documentation and/or other materials provided with the distribution.
- * 3. All advertising materials mentioning features or use of this software
- *    must display the following acknowledgement:
- *    "This product includes cryptographic software written by
- *     Eric Young (eay@cryptsoft.com)"
- *    The word 'cryptographic' can be left out if the rouines from the library
- *    being used are not cryptographic related :-).
- * 4. If you include any Windows specific code (or a derivative thereof) from 
- *    the apps directory (application code) you must include an acknowledgement:
- *    "This product includes software written by Tim Hudson (tjh@cryptsoft.com)"
- * 
- * THIS SOFTWARE IS PROVIDED BY ERIC YOUNG ``AS IS'' AND
- * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
- * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
- * ARE DISCLAIMED.  IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE
- * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
- * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
- * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
- * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
- * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
- * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
- * SUCH DAMAGE.
- * 
- * The licence and distribution terms for any publically available version or
- * derivative of this code cannot be changed.  i.e. this code cannot simply be
- * copied and put under another distribution licence
- * [including the GNU Public Licence.]
- */
-
-#ifndef HEADER_PKCS7_H
-#define HEADER_PKCS7_H
-
-#include <openssl/asn1.h>
-#include <openssl/bio.h>
-#include <openssl/e_os2.h>
-
-#include <openssl/symhacks.h>
-#include <openssl/ossl_typ.h>
-
-#ifdef  __cplusplus
-extern "C" {
-#endif
-
-#ifdef OPENSSL_SYS_WIN32
-/* Under Win32 thes are defined in wincrypt.h */
-#undef PKCS7_ISSUER_AND_SERIAL
-#undef PKCS7_SIGNER_INFO
-#endif
-
-/*
-Encryption_ID		DES-CBC
-Digest_ID		MD5
-Digest_Encryption_ID	rsaEncryption
-Key_Encryption_ID	rsaEncryption
-*/
-
-typedef struct pkcs7_issuer_and_serial_st
-	{
-	X509_NAME *issuer;
-	ASN1_INTEGER *serial;
-	} PKCS7_ISSUER_AND_SERIAL;
-
-typedef struct pkcs7_signer_info_st
-	{
-	ASN1_INTEGER 			*version;	/* version 1 */
-	PKCS7_ISSUER_AND_SERIAL		*issuer_and_serial;
-	X509_ALGOR			*digest_alg;
-	STACK_OF(X509_ATTRIBUTE)	*auth_attr;	/* [ 0 ] */
-	X509_ALGOR			*digest_enc_alg;
-	ASN1_OCTET_STRING		*enc_digest;
-	STACK_OF(X509_ATTRIBUTE)	*unauth_attr;	/* [ 1 ] */
-
-	/* The private key to sign with */
-	EVP_PKEY			*pkey;
-	} PKCS7_SIGNER_INFO;
-
-DECLARE_STACK_OF(PKCS7_SIGNER_INFO)
-DECLARE_ASN1_SET_OF(PKCS7_SIGNER_INFO)
-
-typedef struct pkcs7_recip_info_st
-	{
-	ASN1_INTEGER			*version;	/* version 0 */
-	PKCS7_ISSUER_AND_SERIAL		*issuer_and_serial;
-	X509_ALGOR			*key_enc_algor;
-	ASN1_OCTET_STRING		*enc_key;
-	X509				*cert; /* get the pub-key from this */
-	} PKCS7_RECIP_INFO;
-
-DECLARE_STACK_OF(PKCS7_RECIP_INFO)
-DECLARE_ASN1_SET_OF(PKCS7_RECIP_INFO)
-
-typedef struct pkcs7_signed_st
-	{
-	ASN1_INTEGER			*version;	/* version 1 */
-	STACK_OF(X509_ALGOR)		*md_algs;	/* md used */
-	STACK_OF(X509)			*cert;		/* [ 0 ] */
-	STACK_OF(X509_CRL)		*crl;		/* [ 1 ] */
-	STACK_OF(PKCS7_SIGNER_INFO)	*signer_info;
-
-	struct pkcs7_st			*contents;
-	} PKCS7_SIGNED;
-/* The above structure is very very similar to PKCS7_SIGN_ENVELOPE.
- * How about merging the two */
-
-typedef struct pkcs7_enc_content_st
-	{
-	ASN1_OBJECT			*content_type;
-	X509_ALGOR			*algorithm;
-	ASN1_OCTET_STRING		*enc_data;	/* [ 0 ] */
-	const EVP_CIPHER		*cipher;
-	} PKCS7_ENC_CONTENT;
-
-typedef struct pkcs7_enveloped_st
-	{
-	ASN1_INTEGER			*version;	/* version 0 */
-	STACK_OF(PKCS7_RECIP_INFO)	*recipientinfo;
-	PKCS7_ENC_CONTENT		*enc_data;
-	} PKCS7_ENVELOPE;
-
-typedef struct pkcs7_signedandenveloped_st
-	{
-	ASN1_INTEGER			*version;	/* version 1 */
-	STACK_OF(X509_ALGOR)		*md_algs;	/* md used */
-	STACK_OF(X509)			*cert;		/* [ 0 ] */
-	STACK_OF(X509_CRL)		*crl;		/* [ 1 ] */
-	STACK_OF(PKCS7_SIGNER_INFO)	*signer_info;
-
-	PKCS7_ENC_CONTENT		*enc_data;
-	STACK_OF(PKCS7_RECIP_INFO)	*recipientinfo;
-	} PKCS7_SIGN_ENVELOPE;
-
-typedef struct pkcs7_digest_st
-	{
-	ASN1_INTEGER			*version;	/* version 0 */
-	X509_ALGOR			*md;		/* md used */
-	struct pkcs7_st 		*contents;
-	ASN1_OCTET_STRING		*digest;
-	} PKCS7_DIGEST;
-
-typedef struct pkcs7_encrypted_st
-	{
-	ASN1_INTEGER			*version;	/* version 0 */
-	PKCS7_ENC_CONTENT		*enc_data;
-	} PKCS7_ENCRYPT;
-
-typedef struct pkcs7_st
-	{
-	/* The following is non NULL if it contains ASN1 encoding of
-	 * this structure */
-	unsigned char *asn1;
-	long length;
-
-#define PKCS7_S_HEADER	0
-#define PKCS7_S_BODY	1
-#define PKCS7_S_TAIL	2
-	int state; /* used during processing */
-
-	int detached;
-
-	ASN1_OBJECT *type;
-	/* content as defined by the type */
-	/* all encryption/message digests are applied to the 'contents',
-	 * leaving out the 'type' field. */
-	union	{
-		char *ptr;
-
-		/* NID_pkcs7_data */
-		ASN1_OCTET_STRING *data;
-
-		/* NID_pkcs7_signed */
-		PKCS7_SIGNED *sign;
-
-		/* NID_pkcs7_enveloped */
-		PKCS7_ENVELOPE *enveloped;
-
-		/* NID_pkcs7_signedAndEnveloped */
-		PKCS7_SIGN_ENVELOPE *signed_and_enveloped;
-
-		/* NID_pkcs7_digest */
-		PKCS7_DIGEST *digest;
-
-		/* NID_pkcs7_encrypted */
-		PKCS7_ENCRYPT *encrypted;
-
-		/* Anything else */
-		ASN1_TYPE *other;
-		} d;
-	} PKCS7;
-
-DECLARE_STACK_OF(PKCS7)
-DECLARE_ASN1_SET_OF(PKCS7)
-DECLARE_PKCS12_STACK_OF(PKCS7)
-
-#define PKCS7_OP_SET_DETACHED_SIGNATURE	1
-#define PKCS7_OP_GET_DETACHED_SIGNATURE	2
-
-#define PKCS7_get_signed_attributes(si)	((si)->auth_attr)
-#define PKCS7_get_attributes(si)	((si)->unauth_attr)
-
-#define PKCS7_type_is_signed(a) (OBJ_obj2nid((a)->type) == NID_pkcs7_signed)
-#define PKCS7_type_is_encrypted(a) (OBJ_obj2nid((a)->type) == NID_pkcs7_encrypted)
-#define PKCS7_type_is_enveloped(a) (OBJ_obj2nid((a)->type) == NID_pkcs7_enveloped)
-#define PKCS7_type_is_signedAndEnveloped(a) \
-		(OBJ_obj2nid((a)->type) == NID_pkcs7_signedAndEnveloped)
-#define PKCS7_type_is_data(a)   (OBJ_obj2nid((a)->type) == NID_pkcs7_data)
-
-#define PKCS7_type_is_digest(a)   (OBJ_obj2nid((a)->type) == NID_pkcs7_digest)
-
-#define PKCS7_set_detached(p,v) \
-		PKCS7_ctrl(p,PKCS7_OP_SET_DETACHED_SIGNATURE,v,NULL)
-#define PKCS7_get_detached(p) \
-		PKCS7_ctrl(p,PKCS7_OP_GET_DETACHED_SIGNATURE,0,NULL)
-
-#define PKCS7_is_detached(p7) (PKCS7_type_is_signed(p7) && PKCS7_get_detached(p7))
-
-#ifdef SSLEAY_MACROS
-#ifndef PKCS7_ISSUER_AND_SERIAL_digest
-#define PKCS7_ISSUER_AND_SERIAL_digest(data,type,md,len) \
-        ASN1_digest((int (*)())i2d_PKCS7_ISSUER_AND_SERIAL,type,\
-	                (char *)data,md,len)
-#endif
-#endif
-
-/* S/MIME related flags */
-
-#define PKCS7_TEXT		0x1
-#define PKCS7_NOCERTS		0x2
-#define PKCS7_NOSIGS		0x4
-#define PKCS7_NOCHAIN		0x8
-#define PKCS7_NOINTERN		0x10
-#define PKCS7_NOVERIFY		0x20
-#define PKCS7_DETACHED		0x40
-#define PKCS7_BINARY		0x80
-#define PKCS7_NOATTR		0x100
-#define	PKCS7_NOSMIMECAP	0x200
-#define PKCS7_NOOLDMIMETYPE	0x400
-#define PKCS7_CRLFEOL		0x800
-#define PKCS7_STREAM		0x1000
-#define PKCS7_NOCRL		0x2000
-
-/* Flags: for compatibility with older code */
-
-#define SMIME_TEXT	PKCS7_TEXT
-#define SMIME_NOCERTS	PKCS7_NOCERTS
-#define SMIME_NOSIGS	PKCS7_NOSIGS
-#define SMIME_NOCHAIN	PKCS7_NOCHAIN
-#define SMIME_NOINTERN	PKCS7_NOINTERN
-#define SMIME_NOVERIFY	PKCS7_NOVERIFY
-#define SMIME_DETACHED	PKCS7_DETACHED
-#define SMIME_BINARY	PKCS7_BINARY
-#define SMIME_NOATTR	PKCS7_NOATTR
-
-DECLARE_ASN1_FUNCTIONS(PKCS7_ISSUER_AND_SERIAL)
-
-#ifndef SSLEAY_MACROS
-int PKCS7_ISSUER_AND_SERIAL_digest(PKCS7_ISSUER_AND_SERIAL *data,const EVP_MD *type,
-	unsigned char *md,unsigned int *len);
-#ifndef OPENSSL_NO_FP_API
-PKCS7 *d2i_PKCS7_fp(FILE *fp,PKCS7 **p7);
-int i2d_PKCS7_fp(FILE *fp,PKCS7 *p7);
-#endif
-PKCS7 *PKCS7_dup(PKCS7 *p7);
-PKCS7 *d2i_PKCS7_bio(BIO *bp,PKCS7 **p7);
-int i2d_PKCS7_bio(BIO *bp,PKCS7 *p7);
-#endif
-
-DECLARE_ASN1_FUNCTIONS(PKCS7_SIGNER_INFO)
-DECLARE_ASN1_FUNCTIONS(PKCS7_RECIP_INFO)
-DECLARE_ASN1_FUNCTIONS(PKCS7_SIGNED)
-DECLARE_ASN1_FUNCTIONS(PKCS7_ENC_CONTENT)
-DECLARE_ASN1_FUNCTIONS(PKCS7_ENVELOPE)
-DECLARE_ASN1_FUNCTIONS(PKCS7_SIGN_ENVELOPE)
-DECLARE_ASN1_FUNCTIONS(PKCS7_DIGEST)
-DECLARE_ASN1_FUNCTIONS(PKCS7_ENCRYPT)
-DECLARE_ASN1_FUNCTIONS(PKCS7)
-
-DECLARE_ASN1_ITEM(PKCS7_ATTR_SIGN)
-DECLARE_ASN1_ITEM(PKCS7_ATTR_VERIFY)
-
-DECLARE_ASN1_NDEF_FUNCTION(PKCS7)
-
-long PKCS7_ctrl(PKCS7 *p7, int cmd, long larg, char *parg);
-
-int PKCS7_set_type(PKCS7 *p7, int type);
-int PKCS7_set0_type_other(PKCS7 *p7, int type, ASN1_TYPE *other);
-int PKCS7_set_content(PKCS7 *p7, PKCS7 *p7_data);
-int PKCS7_SIGNER_INFO_set(PKCS7_SIGNER_INFO *p7i, X509 *x509, EVP_PKEY *pkey,
-	const EVP_MD *dgst);
-int PKCS7_add_signer(PKCS7 *p7, PKCS7_SIGNER_INFO *p7i);
-int PKCS7_add_certificate(PKCS7 *p7, X509 *x509);
-int PKCS7_add_crl(PKCS7 *p7, X509_CRL *x509);
-int PKCS7_content_new(PKCS7 *p7, int nid);
-int PKCS7_dataVerify(X509_STORE *cert_store, X509_STORE_CTX *ctx,
-	BIO *bio, PKCS7 *p7, PKCS7_SIGNER_INFO *si); 
-int PKCS7_signatureVerify(BIO *bio, PKCS7 *p7, PKCS7_SIGNER_INFO *si,
-								X509 *x509);
-
-BIO *PKCS7_dataInit(PKCS7 *p7, BIO *bio);
-int PKCS7_dataFinal(PKCS7 *p7, BIO *bio);
-BIO *PKCS7_dataDecode(PKCS7 *p7, EVP_PKEY *pkey, BIO *in_bio, X509 *pcert);
-
-
-PKCS7_SIGNER_INFO *PKCS7_add_signature(PKCS7 *p7, X509 *x509,
-	EVP_PKEY *pkey, const EVP_MD *dgst);
-X509 *PKCS7_cert_from_signer_info(PKCS7 *p7, PKCS7_SIGNER_INFO *si);
-int PKCS7_set_digest(PKCS7 *p7, const EVP_MD *md);
-STACK_OF(PKCS7_SIGNER_INFO) *PKCS7_get_signer_info(PKCS7 *p7);
-
-PKCS7_RECIP_INFO *PKCS7_add_recipient(PKCS7 *p7, X509 *x509);
-int PKCS7_add_recipient_info(PKCS7 *p7, PKCS7_RECIP_INFO *ri);
-int PKCS7_RECIP_INFO_set(PKCS7_RECIP_INFO *p7i, X509 *x509);
-int PKCS7_set_cipher(PKCS7 *p7, const EVP_CIPHER *cipher);
-
-PKCS7_ISSUER_AND_SERIAL *PKCS7_get_issuer_and_serial(PKCS7 *p7, int idx);
-ASN1_OCTET_STRING *PKCS7_digest_from_attributes(STACK_OF(X509_ATTRIBUTE) *sk);
-int PKCS7_add_signed_attribute(PKCS7_SIGNER_INFO *p7si,int nid,int type,
-	void *data);
-int PKCS7_add_attribute (PKCS7_SIGNER_INFO *p7si, int nid, int atrtype,
-	void *value);
-ASN1_TYPE *PKCS7_get_attribute(PKCS7_SIGNER_INFO *si, int nid);
-ASN1_TYPE *PKCS7_get_signed_attribute(PKCS7_SIGNER_INFO *si, int nid);
-int PKCS7_set_signed_attributes(PKCS7_SIGNER_INFO *p7si,
-				STACK_OF(X509_ATTRIBUTE) *sk);
-int PKCS7_set_attributes(PKCS7_SIGNER_INFO *p7si,STACK_OF(X509_ATTRIBUTE) *sk);
-
-
-PKCS7 *PKCS7_sign(X509 *signcert, EVP_PKEY *pkey, STACK_OF(X509) *certs,
-							BIO *data, int flags);
-int PKCS7_verify(PKCS7 *p7, STACK_OF(X509) *certs, X509_STORE *store,
-					BIO *indata, BIO *out, int flags);
-STACK_OF(X509) *PKCS7_get0_signers(PKCS7 *p7, STACK_OF(X509) *certs, int flags);
-PKCS7 *PKCS7_encrypt(STACK_OF(X509) *certs, BIO *in, const EVP_CIPHER *cipher,
-								int flags);
-int PKCS7_decrypt(PKCS7 *p7, EVP_PKEY *pkey, X509 *cert, BIO *data, int flags);
-
-int PKCS7_add_attrib_smimecap(PKCS7_SIGNER_INFO *si,
-			      STACK_OF(X509_ALGOR) *cap);
-STACK_OF(X509_ALGOR) *PKCS7_get_smimecap(PKCS7_SIGNER_INFO *si);
-int PKCS7_simple_smimecap(STACK_OF(X509_ALGOR) *sk, int nid, int arg);
-
-int SMIME_write_PKCS7(BIO *bio, PKCS7 *p7, BIO *data, int flags);
-PKCS7 *SMIME_read_PKCS7(BIO *bio, BIO **bcont);
-int SMIME_crlf_copy(BIO *in, BIO *out, int flags);
-int SMIME_text(BIO *in, BIO *out);
-
-/* BEGIN ERROR CODES */
-/* The following lines are auto generated by the script mkerr.pl. Any changes
- * made after this point may be overwritten when the script is next run.
- */
-void ERR_load_PKCS7_strings(void);
-
-/* Error codes for the PKCS7 functions. */
-
-/* Function codes. */
-#define PKCS7_F_B64_READ_PKCS7				 120
-#define PKCS7_F_B64_WRITE_PKCS7				 121
-#define PKCS7_F_PKCS7_ADD_ATTRIB_SMIMECAP		 118
-#define PKCS7_F_PKCS7_ADD_CERTIFICATE			 100
-#define PKCS7_F_PKCS7_ADD_CRL				 101
-#define PKCS7_F_PKCS7_ADD_RECIPIENT_INFO		 102
-#define PKCS7_F_PKCS7_ADD_SIGNER			 103
-#define PKCS7_F_PKCS7_BIO_ADD_DIGEST			 125
-#define PKCS7_F_PKCS7_CTRL				 104
-#define PKCS7_F_PKCS7_DATADECODE			 112
-#define PKCS7_F_PKCS7_DATAFINAL				 128
-#define PKCS7_F_PKCS7_DATAINIT				 105
-#define PKCS7_F_PKCS7_DATASIGN				 106
-#define PKCS7_F_PKCS7_DATAVERIFY			 107
-#define PKCS7_F_PKCS7_DECRYPT				 114
-#define PKCS7_F_PKCS7_ENCRYPT				 115
-#define PKCS7_F_PKCS7_FIND_DIGEST			 127
-#define PKCS7_F_PKCS7_GET0_SIGNERS			 124
-#define PKCS7_F_PKCS7_SET_CIPHER			 108
-#define PKCS7_F_PKCS7_SET_CONTENT			 109
-#define PKCS7_F_PKCS7_SET_DIGEST			 126
-#define PKCS7_F_PKCS7_SET_TYPE				 110
-#define PKCS7_F_PKCS7_SIGN				 116
-#define PKCS7_F_PKCS7_SIGNATUREVERIFY			 113
-#define PKCS7_F_PKCS7_SIMPLE_SMIMECAP			 119
-#define PKCS7_F_PKCS7_VERIFY				 117
-#define PKCS7_F_SMIME_READ_PKCS7			 122
-#define PKCS7_F_SMIME_TEXT				 123
-
-/* Reason codes. */
-#define PKCS7_R_CERTIFICATE_VERIFY_ERROR		 117
-#define PKCS7_R_CIPHER_HAS_NO_OBJECT_IDENTIFIER		 144
-#define PKCS7_R_CIPHER_NOT_INITIALIZED			 116
-#define PKCS7_R_CONTENT_AND_DATA_PRESENT		 118
-#define PKCS7_R_DECODE_ERROR				 130
-#define PKCS7_R_DECRYPTED_KEY_IS_WRONG_LENGTH		 100
-#define PKCS7_R_DECRYPT_ERROR				 119
-#define PKCS7_R_DIGEST_FAILURE				 101
-#define PKCS7_R_ERROR_ADDING_RECIPIENT			 120
-#define PKCS7_R_ERROR_SETTING_CIPHER			 121
-#define PKCS7_R_INVALID_MIME_TYPE			 131
-#define PKCS7_R_INVALID_NULL_POINTER			 143
-#define PKCS7_R_MIME_NO_CONTENT_TYPE			 132
-#define PKCS7_R_MIME_PARSE_ERROR			 133
-#define PKCS7_R_MIME_SIG_PARSE_ERROR			 134
-#define PKCS7_R_MISSING_CERIPEND_INFO			 103
-#define PKCS7_R_NO_CONTENT				 122
-#define PKCS7_R_NO_CONTENT_TYPE				 135
-#define PKCS7_R_NO_MULTIPART_BODY_FAILURE		 136
-#define PKCS7_R_NO_MULTIPART_BOUNDARY			 137
-#define PKCS7_R_NO_RECIPIENT_MATCHES_CERTIFICATE	 115
-#define PKCS7_R_NO_RECIPIENT_MATCHES_KEY		 146
-#define PKCS7_R_NO_SIGNATURES_ON_DATA			 123
-#define PKCS7_R_NO_SIGNERS				 142
-#define PKCS7_R_NO_SIG_CONTENT_TYPE			 138
-#define PKCS7_R_OPERATION_NOT_SUPPORTED_ON_THIS_TYPE	 104
-#define PKCS7_R_PKCS7_ADD_SIGNATURE_ERROR		 124
-#define PKCS7_R_PKCS7_DATAFINAL				 126
-#define PKCS7_R_PKCS7_DATAFINAL_ERROR			 125
-#define PKCS7_R_PKCS7_DATASIGN				 145
-#define PKCS7_R_PKCS7_PARSE_ERROR			 139
-#define PKCS7_R_PKCS7_SIG_PARSE_ERROR			 140
-#define PKCS7_R_PRIVATE_KEY_DOES_NOT_MATCH_CERTIFICATE	 127
-#define PKCS7_R_SIGNATURE_FAILURE			 105
-#define PKCS7_R_SIGNER_CERTIFICATE_NOT_FOUND		 128
-#define PKCS7_R_SIG_INVALID_MIME_TYPE			 141
-#define PKCS7_R_SMIME_TEXT_ERROR			 129
-#define PKCS7_R_UNABLE_TO_FIND_CERTIFICATE		 106
-#define PKCS7_R_UNABLE_TO_FIND_MEM_BIO			 107
-#define PKCS7_R_UNABLE_TO_FIND_MESSAGE_DIGEST		 108
-#define PKCS7_R_UNKNOWN_DIGEST_TYPE			 109
-#define PKCS7_R_UNKNOWN_OPERATION			 110
-#define PKCS7_R_UNSUPPORTED_CIPHER_TYPE			 111
-#define PKCS7_R_UNSUPPORTED_CONTENT_TYPE		 112
-#define PKCS7_R_WRONG_CONTENT_TYPE			 113
-#define PKCS7_R_WRONG_PKCS7_TYPE			 114
-
-#ifdef  __cplusplus
-}
-#endif
-#endif
diff --git a/crypto/openssl/crypto/pkcs7/pkcs7err.c b/crypto/openssl/crypto/pkcs7/pkcs7err.c
deleted file mode 100644
index c0e3d4cd3336..000000000000
--- a/crypto/openssl/crypto/pkcs7/pkcs7err.c
+++ /dev/null
@@ -1,167 +0,0 @@
-/* crypto/pkcs7/pkcs7err.c */
-/* ====================================================================
- * Copyright (c) 1999-2005 The OpenSSL Project.  All rights reserved.
- *
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions
- * are met:
- *
- * 1. Redistributions of source code must retain the above copyright
- *    notice, this list of conditions and the following disclaimer. 
- *
- * 2. Redistributions in binary form must reproduce the above copyright
- *    notice, this list of conditions and the following disclaimer in
- *    the documentation and/or other materials provided with the
- *    distribution.
- *
- * 3. All advertising materials mentioning features or use of this
- *    software must display the following acknowledgment:
- *    "This product includes software developed by the OpenSSL Project
- *    for use in the OpenSSL Toolkit. (http://www.OpenSSL.org/)"
- *
- * 4. The names "OpenSSL Toolkit" and "OpenSSL Project" must not be used to
- *    endorse or promote products derived from this software without
- *    prior written permission. For written permission, please contact
- *    openssl-core@OpenSSL.org.
- *
- * 5. Products derived from this software may not be called "OpenSSL"
- *    nor may "OpenSSL" appear in their names without prior written
- *    permission of the OpenSSL Project.
- *
- * 6. Redistributions of any form whatsoever must retain the following
- *    acknowledgment:
- *    "This product includes software developed by the OpenSSL Project
- *    for use in the OpenSSL Toolkit (http://www.OpenSSL.org/)"
- *
- * THIS SOFTWARE IS PROVIDED BY THE OpenSSL PROJECT ``AS IS'' AND ANY
- * EXPRESSED OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
- * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR
- * PURPOSE ARE DISCLAIMED.  IN NO EVENT SHALL THE OpenSSL PROJECT OR
- * ITS CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
- * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
- * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
- * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
- * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
- * STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
- * ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED
- * OF THE POSSIBILITY OF SUCH DAMAGE.
- * ====================================================================
- *
- * This product includes cryptographic software written by Eric Young
- * (eay@cryptsoft.com).  This product includes software written by Tim
- * Hudson (tjh@cryptsoft.com).
- *
- */
-
-/* NOTE: this file was auto generated by the mkerr.pl script: any changes
- * made to it will be overwritten when the script next updates this file,
- * only reason strings will be preserved.
- */
-
-#include <stdio.h>
-#include <openssl/err.h>
-#include <openssl/pkcs7.h>
-
-/* BEGIN ERROR CODES */
-#ifndef OPENSSL_NO_ERR
-
-#define ERR_FUNC(func) ERR_PACK(ERR_LIB_PKCS7,func,0)
-#define ERR_REASON(reason) ERR_PACK(ERR_LIB_PKCS7,0,reason)
-
-static ERR_STRING_DATA PKCS7_str_functs[]=
-	{
-{ERR_FUNC(PKCS7_F_B64_READ_PKCS7),	"B64_READ_PKCS7"},
-{ERR_FUNC(PKCS7_F_B64_WRITE_PKCS7),	"B64_WRITE_PKCS7"},
-{ERR_FUNC(PKCS7_F_PKCS7_ADD_ATTRIB_SMIMECAP),	"PKCS7_add_attrib_smimecap"},
-{ERR_FUNC(PKCS7_F_PKCS7_ADD_CERTIFICATE),	"PKCS7_add_certificate"},
-{ERR_FUNC(PKCS7_F_PKCS7_ADD_CRL),	"PKCS7_add_crl"},
-{ERR_FUNC(PKCS7_F_PKCS7_ADD_RECIPIENT_INFO),	"PKCS7_add_recipient_info"},
-{ERR_FUNC(PKCS7_F_PKCS7_ADD_SIGNER),	"PKCS7_add_signer"},
-{ERR_FUNC(PKCS7_F_PKCS7_BIO_ADD_DIGEST),	"PKCS7_BIO_ADD_DIGEST"},
-{ERR_FUNC(PKCS7_F_PKCS7_CTRL),	"PKCS7_ctrl"},
-{ERR_FUNC(PKCS7_F_PKCS7_DATADECODE),	"PKCS7_dataDecode"},
-{ERR_FUNC(PKCS7_F_PKCS7_DATAFINAL),	"PKCS7_dataFinal"},
-{ERR_FUNC(PKCS7_F_PKCS7_DATAINIT),	"PKCS7_dataInit"},
-{ERR_FUNC(PKCS7_F_PKCS7_DATASIGN),	"PKCS7_DATASIGN"},
-{ERR_FUNC(PKCS7_F_PKCS7_DATAVERIFY),	"PKCS7_dataVerify"},
-{ERR_FUNC(PKCS7_F_PKCS7_DECRYPT),	"PKCS7_decrypt"},
-{ERR_FUNC(PKCS7_F_PKCS7_ENCRYPT),	"PKCS7_encrypt"},
-{ERR_FUNC(PKCS7_F_PKCS7_FIND_DIGEST),	"PKCS7_FIND_DIGEST"},
-{ERR_FUNC(PKCS7_F_PKCS7_GET0_SIGNERS),	"PKCS7_get0_signers"},
-{ERR_FUNC(PKCS7_F_PKCS7_SET_CIPHER),	"PKCS7_set_cipher"},
-{ERR_FUNC(PKCS7_F_PKCS7_SET_CONTENT),	"PKCS7_set_content"},
-{ERR_FUNC(PKCS7_F_PKCS7_SET_DIGEST),	"PKCS7_set_digest"},
-{ERR_FUNC(PKCS7_F_PKCS7_SET_TYPE),	"PKCS7_set_type"},
-{ERR_FUNC(PKCS7_F_PKCS7_SIGN),	"PKCS7_sign"},
-{ERR_FUNC(PKCS7_F_PKCS7_SIGNATUREVERIFY),	"PKCS7_signatureVerify"},
-{ERR_FUNC(PKCS7_F_PKCS7_SIMPLE_SMIMECAP),	"PKCS7_simple_smimecap"},
-{ERR_FUNC(PKCS7_F_PKCS7_VERIFY),	"PKCS7_verify"},
-{ERR_FUNC(PKCS7_F_SMIME_READ_PKCS7),	"SMIME_read_PKCS7"},
-{ERR_FUNC(PKCS7_F_SMIME_TEXT),	"SMIME_text"},
-{0,NULL}
-	};
-
-static ERR_STRING_DATA PKCS7_str_reasons[]=
-	{
-{ERR_REASON(PKCS7_R_CERTIFICATE_VERIFY_ERROR),"certificate verify error"},
-{ERR_REASON(PKCS7_R_CIPHER_HAS_NO_OBJECT_IDENTIFIER),"cipher has no object identifier"},
-{ERR_REASON(PKCS7_R_CIPHER_NOT_INITIALIZED),"cipher not initialized"},
-{ERR_REASON(PKCS7_R_CONTENT_AND_DATA_PRESENT),"content and data present"},
-{ERR_REASON(PKCS7_R_DECODE_ERROR)        ,"decode error"},
-{ERR_REASON(PKCS7_R_DECRYPTED_KEY_IS_WRONG_LENGTH),"decrypted key is wrong length"},
-{ERR_REASON(PKCS7_R_DECRYPT_ERROR)       ,"decrypt error"},
-{ERR_REASON(PKCS7_R_DIGEST_FAILURE)      ,"digest failure"},
-{ERR_REASON(PKCS7_R_ERROR_ADDING_RECIPIENT),"error adding recipient"},
-{ERR_REASON(PKCS7_R_ERROR_SETTING_CIPHER),"error setting cipher"},
-{ERR_REASON(PKCS7_R_INVALID_MIME_TYPE)   ,"invalid mime type"},
-{ERR_REASON(PKCS7_R_INVALID_NULL_POINTER),"invalid null pointer"},
-{ERR_REASON(PKCS7_R_MIME_NO_CONTENT_TYPE),"mime no content type"},
-{ERR_REASON(PKCS7_R_MIME_PARSE_ERROR)    ,"mime parse error"},
-{ERR_REASON(PKCS7_R_MIME_SIG_PARSE_ERROR),"mime sig parse error"},
-{ERR_REASON(PKCS7_R_MISSING_CERIPEND_INFO),"missing ceripend info"},
-{ERR_REASON(PKCS7_R_NO_CONTENT)          ,"no content"},
-{ERR_REASON(PKCS7_R_NO_CONTENT_TYPE)     ,"no content type"},
-{ERR_REASON(PKCS7_R_NO_MULTIPART_BODY_FAILURE),"no multipart body failure"},
-{ERR_REASON(PKCS7_R_NO_MULTIPART_BOUNDARY),"no multipart boundary"},
-{ERR_REASON(PKCS7_R_NO_RECIPIENT_MATCHES_CERTIFICATE),"no recipient matches certificate"},
-{ERR_REASON(PKCS7_R_NO_RECIPIENT_MATCHES_KEY),"no recipient matches key"},
-{ERR_REASON(PKCS7_R_NO_SIGNATURES_ON_DATA),"no signatures on data"},
-{ERR_REASON(PKCS7_R_NO_SIGNERS)          ,"no signers"},
-{ERR_REASON(PKCS7_R_NO_SIG_CONTENT_TYPE) ,"no sig content type"},
-{ERR_REASON(PKCS7_R_OPERATION_NOT_SUPPORTED_ON_THIS_TYPE),"operation not supported on this type"},
-{ERR_REASON(PKCS7_R_PKCS7_ADD_SIGNATURE_ERROR),"pkcs7 add signature error"},
-{ERR_REASON(PKCS7_R_PKCS7_DATAFINAL)     ,"pkcs7 datafinal"},
-{ERR_REASON(PKCS7_R_PKCS7_DATAFINAL_ERROR),"pkcs7 datafinal error"},
-{ERR_REASON(PKCS7_R_PKCS7_DATASIGN)      ,"pkcs7 datasign"},
-{ERR_REASON(PKCS7_R_PKCS7_PARSE_ERROR)   ,"pkcs7 parse error"},
-{ERR_REASON(PKCS7_R_PKCS7_SIG_PARSE_ERROR),"pkcs7 sig parse error"},
-{ERR_REASON(PKCS7_R_PRIVATE_KEY_DOES_NOT_MATCH_CERTIFICATE),"private key does not match certificate"},
-{ERR_REASON(PKCS7_R_SIGNATURE_FAILURE)   ,"signature failure"},
-{ERR_REASON(PKCS7_R_SIGNER_CERTIFICATE_NOT_FOUND),"signer certificate not found"},
-{ERR_REASON(PKCS7_R_SIG_INVALID_MIME_TYPE),"sig invalid mime type"},
-{ERR_REASON(PKCS7_R_SMIME_TEXT_ERROR)    ,"smime text error"},
-{ERR_REASON(PKCS7_R_UNABLE_TO_FIND_CERTIFICATE),"unable to find certificate"},
-{ERR_REASON(PKCS7_R_UNABLE_TO_FIND_MEM_BIO),"unable to find mem bio"},
-{ERR_REASON(PKCS7_R_UNABLE_TO_FIND_MESSAGE_DIGEST),"unable to find message digest"},
-{ERR_REASON(PKCS7_R_UNKNOWN_DIGEST_TYPE) ,"unknown digest type"},
-{ERR_REASON(PKCS7_R_UNKNOWN_OPERATION)   ,"unknown operation"},
-{ERR_REASON(PKCS7_R_UNSUPPORTED_CIPHER_TYPE),"unsupported cipher type"},
-{ERR_REASON(PKCS7_R_UNSUPPORTED_CONTENT_TYPE),"unsupported content type"},
-{ERR_REASON(PKCS7_R_WRONG_CONTENT_TYPE)  ,"wrong content type"},
-{ERR_REASON(PKCS7_R_WRONG_PKCS7_TYPE)    ,"wrong pkcs7 type"},
-{0,NULL}
-	};
-
-#endif
-
-void ERR_load_PKCS7_strings(void)
-	{
-#ifndef OPENSSL_NO_ERR
-
-	if (ERR_func_error_string(PKCS7_str_functs[0].error) == NULL)
-		{
-		ERR_load_strings(0,PKCS7_str_functs);
-		ERR_load_strings(0,PKCS7_str_reasons);
-		}
-#endif
-	}
diff --git a/crypto/openssl/crypto/pkcs7/server.pem b/crypto/openssl/crypto/pkcs7/server.pem
deleted file mode 100644
index 750aac209468..000000000000
--- a/crypto/openssl/crypto/pkcs7/server.pem
+++ /dev/null
@@ -1,24 +0,0 @@
-issuer= /C=AU/ST=Queensland/O=CryptSoft Pty Ltd/CN=Test CA (1024 bit)
-subject=/C=AU/ST=Queensland/O=CryptSoft Pty Ltd/CN=Server test cert (512 bit)
------BEGIN CERTIFICATE-----
-MIIB6TCCAVICAQAwDQYJKoZIhvcNAQEEBQAwWzELMAkGA1UEBhMCQVUxEzARBgNV
-BAgTClF1ZWVuc2xhbmQxGjAYBgNVBAoTEUNyeXB0U29mdCBQdHkgTHRkMRswGQYD
-VQQDExJUZXN0IENBICgxMDI0IGJpdCkwHhcNOTcwNjA5MTM1NzQ2WhcNOTgwNjA5
-MTM1NzQ2WjBjMQswCQYDVQQGEwJBVTETMBEGA1UECBMKUXVlZW5zbGFuZDEaMBgG
-A1UEChMRQ3J5cHRTb2Z0IFB0eSBMdGQxIzAhBgNVBAMTGlNlcnZlciB0ZXN0IGNl
-cnQgKDUxMiBiaXQpMFwwDQYJKoZIhvcNAQEBBQADSwAwSAJBAJ+zw4Qnlf8SMVIP
-Fe9GEcStgOY2Ww/dgNdhjeD8ckUJNP5VZkVDTGiXav6ooKXfX3j/7tdkuD8Ey2//
-Kv7+ue0CAwEAATANBgkqhkiG9w0BAQQFAAOBgQB4TMR2CvacKE9wAsu9jyCX8YiW
-mgCM+YoP6kt4Zkj2z5IRfm7WrycKsnpnOR+tGeqAjkCeZ6/36o9l91RvPnN1VJ/i
-xQv2df0KFeMr00IkDdTNAdIWqFkSsZTAY2QAdgenb7MB1joejquYzO2DQIO7+wpH
-irObpESxAZLySCmPPg==
------END CERTIFICATE-----
------BEGIN RSA PRIVATE KEY-----
-MIIBPAIBAAJBAJ+zw4Qnlf8SMVIPFe9GEcStgOY2Ww/dgNdhjeD8ckUJNP5VZkVD
-TGiXav6ooKXfX3j/7tdkuD8Ey2//Kv7+ue0CAwEAAQJAN6W31vDEP2DjdqhzCDDu
-OA4NACqoiFqyblo7yc2tM4h4xMbC3Yx5UKMN9ZkCtX0gzrz6DyF47bdKcWBzNWCj
-gQIhANEoojVt7hq+SQ6MCN6FTAysGgQf56Q3TYoJMoWvdiXVAiEAw3e3rc+VJpOz
-rHuDo6bgpjUAAXM+v3fcpsfZSNO6V7kCIQCtbVjanpUwvZkMI9by02oUk9taki3b
-PzPfAfNPYAbCJQIhAJXNQDWyqwn/lGmR11cqY2y9nZ1+5w3yHGatLrcDnQHxAiEA
-vnlEGo8K85u+KwIOimM48ZG8oTk7iFdkqLJR1utT3aU=
------END RSA PRIVATE KEY-----
diff --git a/crypto/openssl/crypto/pkcs7/sign.c b/crypto/openssl/crypto/pkcs7/sign.c
deleted file mode 100644
index 8b59885f7ea1..000000000000
--- a/crypto/openssl/crypto/pkcs7/sign.c
+++ /dev/null
@@ -1,154 +0,0 @@
-/* crypto/pkcs7/sign.c */
-/* Copyright (C) 1995-1998 Eric Young (eay@cryptsoft.com)
- * All rights reserved.
- *
- * This package is an SSL implementation written
- * by Eric Young (eay@cryptsoft.com).
- * The implementation was written so as to conform with Netscapes SSL.
- * 
- * This library is free for commercial and non-commercial use as long as
- * the following conditions are aheared to.  The following conditions
- * apply to all code found in this distribution, be it the RC4, RSA,
- * lhash, DES, etc., code; not just the SSL code.  The SSL documentation
- * included with this distribution is covered by the same copyright terms
- * except that the holder is Tim Hudson (tjh@cryptsoft.com).
- * 
- * Copyright remains Eric Young's, and as such any Copyright notices in
- * the code are not to be removed.
- * If this package is used in a product, Eric Young should be given attribution
- * as the author of the parts of the library used.
- * This can be in the form of a textual message at program startup or
- * in documentation (online or textual) provided with the package.
- * 
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions
- * are met:
- * 1. Redistributions of source code must retain the copyright
- *    notice, this list of conditions and the following disclaimer.
- * 2. Redistributions in binary form must reproduce the above copyright
- *    notice, this list of conditions and the following disclaimer in the
- *    documentation and/or other materials provided with the distribution.
- * 3. All advertising materials mentioning features or use of this software
- *    must display the following acknowledgement:
- *    "This product includes cryptographic software written by
- *     Eric Young (eay@cryptsoft.com)"
- *    The word 'cryptographic' can be left out if the rouines from the library
- *    being used are not cryptographic related :-).
- * 4. If you include any Windows specific code (or a derivative thereof) from 
- *    the apps directory (application code) you must include an acknowledgement:
- *    "This product includes software written by Tim Hudson (tjh@cryptsoft.com)"
- * 
- * THIS SOFTWARE IS PROVIDED BY ERIC YOUNG ``AS IS'' AND
- * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
- * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
- * ARE DISCLAIMED.  IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE
- * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
- * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
- * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
- * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
- * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
- * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
- * SUCH DAMAGE.
- * 
- * The licence and distribution terms for any publically available version or
- * derivative of this code cannot be changed.  i.e. this code cannot simply be
- * copied and put under another distribution licence
- * [including the GNU Public Licence.]
- */
-#include <stdio.h>
-#include <string.h>
-#include <openssl/bio.h>
-#include <openssl/x509.h>
-#include <openssl/pem.h>
-#include <openssl/err.h>
-
-int main(argc,argv)
-int argc;
-char *argv[];
-	{
-	X509 *x509;
-	EVP_PKEY *pkey;
-	PKCS7 *p7;
-	PKCS7_SIGNER_INFO *si;
-	BIO *in;
-	BIO *data,*p7bio;
-	char buf[1024*4];
-	int i;
-	int nodetach=0;
-
-#ifndef OPENSSL_NO_MD2
-	EVP_add_digest(EVP_md2());
-#endif
-#ifndef OPENSSL_NO_MD5
-	EVP_add_digest(EVP_md5());
-#endif
-#ifndef OPENSSL_NO_SHA1
-	EVP_add_digest(EVP_sha1());
-#endif
-#ifndef OPENSSL_NO_MDC2
-	EVP_add_digest(EVP_mdc2());
-#endif
-
-	data=BIO_new(BIO_s_file());
-again:
-	if (argc > 1)
-		{
-		if (strcmp(argv[1],"-nd") == 0)
-			{
-			nodetach=1;
-			argv++; argc--;
-			goto again;
-			}
-		if (!BIO_read_filename(data,argv[1]))
-			goto err;
-		}
-	else
-		BIO_set_fp(data,stdin,BIO_NOCLOSE);
-
-	if ((in=BIO_new_file("server.pem","r")) == NULL) goto err;
-	if ((x509=PEM_read_bio_X509(in,NULL,NULL,NULL)) == NULL) goto err;
-	BIO_reset(in);
-	if ((pkey=PEM_read_bio_PrivateKey(in,NULL,NULL,NULL)) == NULL) goto err;
-	BIO_free(in);
-
-	p7=PKCS7_new();
-	PKCS7_set_type(p7,NID_pkcs7_signed);
-	 
-	si=PKCS7_add_signature(p7,x509,pkey,EVP_sha1());
-	if (si == NULL) goto err;
-
-	/* If you do this then you get signing time automatically added */
-	PKCS7_add_signed_attribute(si, NID_pkcs9_contentType, V_ASN1_OBJECT,
-						OBJ_nid2obj(NID_pkcs7_data));
-
-	/* we may want to add more */
-	PKCS7_add_certificate(p7,x509);
-
-	/* Set the content of the signed to 'data' */
-	PKCS7_content_new(p7,NID_pkcs7_data);
-
-	if (!nodetach)
-		PKCS7_set_detached(p7,1);
-
-	if ((p7bio=PKCS7_dataInit(p7,NULL)) == NULL) goto err;
-
-	for (;;)
-		{
-		i=BIO_read(data,buf,sizeof(buf));
-		if (i <= 0) break;
-		BIO_write(p7bio,buf,i);
-		}
-
-	if (!PKCS7_dataFinal(p7,p7bio)) goto err;
-	BIO_free(p7bio);
-
-	PEM_write_PKCS7(stdout,p7);
-	PKCS7_free(p7);
-
-	exit(0);
-err:
-	ERR_load_crypto_strings();
-	ERR_print_errors_fp(stderr);
-	exit(1);
-	}
-
diff --git a/crypto/openssl/crypto/pkcs7/t/3des.pem b/crypto/openssl/crypto/pkcs7/t/3des.pem
deleted file mode 100644
index b2b5081a10ec..000000000000
--- a/crypto/openssl/crypto/pkcs7/t/3des.pem
+++ /dev/null
@@ -1,16 +0,0 @@
------BEGIN PKCS7-----
-MIAGCSqGSIb3DQEHA6CAMIACAQAxggHmMIHwAgEAMIGZMIGSMQswCQYDVQQGEwJBVTETMBEG
-A1UECBMKUXVlZW5zbGFuZDERMA8GA1UEBxMIQnJpc2JhbmUxGjAYBgNVBAoTEUNyeXB0c29m
-dCBQdHkgTHRkMSIwIAYDVQQLExlERU1PTlNUUkFUSU9OIEFORCBURVNUSU5HMRswGQYDVQQD
-ExJERU1PIFpFUk8gVkFMVUUgQ0ECAgR+MA0GCSqGSIb3DQEBAQUABEC2vXI1xQDW6lUHM3zQ
-/9uBEBOO5A3TtkrklAXq7v01gsIC21t52qSk36REXY+slhNZ0OQ349tgkTsoETHFLoEwMIHw
-AgEAMIGZMIGSMQswCQYDVQQGEwJBVTETMBEGA1UECBMKUXVlZW5zbGFuZDERMA8GA1UEBxMI
-QnJpc2JhbmUxGjAYBgNVBAoTEUNyeXB0c29mdCBQdHkgTHRkMSIwIAYDVQQLExlERU1PTlNU
-UkFUSU9OIEFORCBURVNUSU5HMRswGQYDVQQDExJERU1PIFpFUk8gVkFMVUUgQ0ECAgR9MA0G
-CSqGSIb3DQEBAQUABEB8ujxbabxXUYJhopuDm3oDq4JNqX6Io4p3ro+ShqfIndsXTZ1v5a2N
-WtLLCWlHn/habjBwZ/DgQgcKASbZ7QxNMIAGCSqGSIb3DQEHATAaBggqhkiG9w0DAjAOAgIA
-oAQIbsL5v1wX98KggAQoAaJ4WHm68fXY1WE5OIjfVBIDpO1K+i8dmKhjnAjrjoyZ9Bwc8rDL
-lgQg4CXb805h5xl+GfvSwUaHJayte1m2mcOhs3J2YyqbQ+MEIMIiJQccmhO3oDKm36CFvYR8
-5PjpclVcZyX2ngbwPFMnBAgy0clOAE6UKAAAAAAAAAAAAAA=
------END PKCS7-----
-
diff --git a/crypto/openssl/crypto/pkcs7/t/3dess.pem b/crypto/openssl/crypto/pkcs7/t/3dess.pem
deleted file mode 100644
index 23f013516a51..000000000000
--- a/crypto/openssl/crypto/pkcs7/t/3dess.pem
+++ /dev/null
@@ -1,32 +0,0 @@
------BEGIN PKCS7-----
-MIIGHgYJKoZIhvcNAQcCoIIGDzCCBgsCAQExCzAJBgUrDgMCGgUAMAsGCSqGSIb3DQEHAaCC
-BGswggJTMIIB/aADAgECAgIEfjANBgkqhkiG9w0BAQQFADCBkjELMAkGA1UEBhMCQVUxEzAR
-BgNVBAgTClF1ZWVuc2xhbmQxETAPBgNVBAcTCEJyaXNiYW5lMRowGAYDVQQKExFDcnlwdHNv
-ZnQgUHR5IEx0ZDEiMCAGA1UECxMZREVNT05TVFJBVElPTiBBTkQgVEVTVElORzEbMBkGA1UE
-AxMSREVNTyBaRVJPIFZBTFVFIENBMB4XDTk4MDUxMzA2MjY1NloXDTAwMDUxMjA2MjY1Nlow
-gaUxCzAJBgNVBAYTAkFVMRMwEQYDVQQIEwpRdWVlbnNsYW5kMREwDwYDVQQHEwhCcmlzYmFu
-ZTEaMBgGA1UEChMRQ3J5cHRzb2Z0IFB0eSBMdGQxEjAQBgNVBAsTCVNNSU1FIDAwMzEZMBcG
-A1UEAxMQQW5nZWxhIHZhbiBMZWVudDEjMCEGCSqGSIb3DQEJARYUYW5nZWxhQGNyeXB0c29m
-dC5jb20wXDANBgkqhkiG9w0BAQEFAANLADBIAkEAuC3+7dAb2LhuO7gt2cTM8vsNjhG5JfDh
-hX1Vl/wVGbKEEj0MA6vWEolvefQlxB+EzwCtR0YZ7eEC/T/4JoCyeQIDAQABoygwJjAkBglg
-hkgBhvhCAQ0EFxYVR2VuZXJhdGVkIHdpdGggU1NMZWF5MA0GCSqGSIb3DQEBBAUAA0EAUnSP
-igs6TMFISTjw8cBtJYb98czgAVkVFjKyJQwYMH8FbDnCyx6NocM555nsyDstaw8fKR11Khds
-syd3ikkrhDCCAhAwggG6AgEDMA0GCSqGSIb3DQEBBAUAMIGSMQswCQYDVQQGEwJBVTETMBEG
-A1UECBMKUXVlZW5zbGFuZDERMA8GA1UEBxMIQnJpc2JhbmUxGjAYBgNVBAoTEUNyeXB0c29m
-dCBQdHkgTHRkMSIwIAYDVQQLExlERU1PTlNUUkFUSU9OIEFORCBURVNUSU5HMRswGQYDVQQD
-ExJERU1PIFpFUk8gVkFMVUUgQ0EwHhcNOTgwMzAzMDc0MTMyWhcNMDgwMjI5MDc0MTMyWjCB
-kjELMAkGA1UEBhMCQVUxEzARBgNVBAgTClF1ZWVuc2xhbmQxETAPBgNVBAcTCEJyaXNiYW5l
-MRowGAYDVQQKExFDcnlwdHNvZnQgUHR5IEx0ZDEiMCAGA1UECxMZREVNT05TVFJBVElPTiBB
-TkQgVEVTVElORzEbMBkGA1UEAxMSREVNTyBaRVJPIFZBTFVFIENBMFwwDQYJKoZIhvcNAQEB
-BQADSwAwSAJBAL+0E2fLej3FSCwe2A2iRnMuC3z12qHIp6Ky1wo2zZcxft7AI+RfkrWrSGtf
-mfzBEuPrLdfulncC5Y1pNcM8RTUCAwEAATANBgkqhkiG9w0BAQQFAANBAGSbLMphL6F5pp3s
-8o0Xyh86FHFdpVOwYx09ELLkuG17V/P9pgIc0Eo/gDMbN+KT3IdgECf8S//pCRA6RrNjcXIx
-ggF7MIIBdwIBATCBmTCBkjELMAkGA1UEBhMCQVUxEzARBgNVBAgTClF1ZWVuc2xhbmQxETAP
-BgNVBAcTCEJyaXNiYW5lMRowGAYDVQQKExFDcnlwdHNvZnQgUHR5IEx0ZDEiMCAGA1UECxMZ
-REVNT05TVFJBVElPTiBBTkQgVEVTVElORzEbMBkGA1UEAxMSREVNTyBaRVJPIFZBTFVFIENB
-AgIEfjAJBgUrDgMCGgUAoHowGAYJKoZIhvcNAQkDMQsGCSqGSIb3DQEHATAbBgkqhkiG9w0B
-CQ8xDjAMMAoGCCqGSIb3DQMHMBwGCSqGSIb3DQEJBTEPFw05ODA1MTQwMzM5MzdaMCMGCSqG
-SIb3DQEJBDEWBBQstNMnSV26ba8PapQEDhO21yNFrjANBgkqhkiG9w0BAQEFAARAW9Xb9YXv
-BfcNkutgFX9Gr8iXhBVsNtGEVrjrpkQwpKa7jHI8SjAlLhk/4RFwDHf+ISB9Np3Z1WDWnLcA
-9CWR6g==
------END PKCS7-----
diff --git a/crypto/openssl/crypto/pkcs7/t/c.pem b/crypto/openssl/crypto/pkcs7/t/c.pem
deleted file mode 100644
index a4b55e321a5c..000000000000
--- a/crypto/openssl/crypto/pkcs7/t/c.pem
+++ /dev/null
@@ -1,48 +0,0 @@
-issuer :/C=AU/SP=Queensland/L=Brisbane/O=Cryptsoft Pty Ltd/OU=DEMONSTRATION AND TESTING/CN=DEMO ZERO VALUE CA
-subject:/C=AU/SP=Queensland/L=Brisbane/O=Cryptsoft Pty Ltd/OU=SMIME 003/CN=Information/Email=info@cryptsoft.com
-serial :047D
-
-Certificate:
-    Data:
-        Version: 3 (0x2)
-        Serial Number: 1149 (0x47d)
-        Signature Algorithm: md5withRSAEncryption
-        Issuer: C=AU, SP=Queensland, L=Brisbane, O=Cryptsoft Pty Ltd, OU=DEMONSTRATION AND TESTING, CN=DEMO ZERO VALUE CA
-        Validity
-            Not Before: May 13 05:40:58 1998 GMT
-            Not After : May 12 05:40:58 2000 GMT
-        Subject: C=AU, SP=Queensland, L=Brisbane, O=Cryptsoft Pty Ltd, OU=SMIME 003, CN=Information/Email=info@cryptsoft.com
-        Subject Public Key Info:
-            Public Key Algorithm: rsaEncryption
-                Modulus:
-                    00:ad:e7:23:89:ee:0d:87:b7:9c:32:44:4b:95:81:
-                    73:dd:22:80:4b:2d:c5:60:b8:fe:1e:18:63:ef:dc:
-                    89:89:22:df:95:3c:7a:db:3d:9a:06:a8:08:d6:29:
-                    fd:ef:41:09:91:ed:bc:ad:98:f9:f6:28:90:62:6f:
-                    e7:e7:0c:4d:0b
-                Exponent: 65537 (0x10001)
-        X509v3 extensions:
-            Netscape Comment: 
-                Generated with SSLeay
-    Signature Algorithm: md5withRSAEncryption
-        52:15:ea:88:f4:f0:f9:0b:ef:ce:d5:f8:83:40:61:16:5e:55:
-        f9:ce:2d:d1:8b:31:5c:03:c6:2d:10:7c:61:d5:5c:0a:42:97:
-        d1:fd:65:b6:b6:84:a5:39:ec:46:ec:fc:e0:0d:d9:22:da:1b:
-        50:74:ad:92:cb:4e:90:e5:fa:7d
-
------BEGIN CERTIFICATE-----
-MIICTDCCAfagAwIBAgICBH0wDQYJKoZIhvcNAQEEBQAwgZIxCzAJBgNVBAYTAkFV
-MRMwEQYDVQQIEwpRdWVlbnNsYW5kMREwDwYDVQQHEwhCcmlzYmFuZTEaMBgGA1UE
-ChMRQ3J5cHRzb2Z0IFB0eSBMdGQxIjAgBgNVBAsTGURFTU9OU1RSQVRJT04gQU5E
-IFRFU1RJTkcxGzAZBgNVBAMTEkRFTU8gWkVSTyBWQUxVRSBDQTAeFw05ODA1MTMw
-NTQwNThaFw0wMDA1MTIwNTQwNThaMIGeMQswCQYDVQQGEwJBVTETMBEGA1UECBMK
-UXVlZW5zbGFuZDERMA8GA1UEBxMIQnJpc2JhbmUxGjAYBgNVBAoTEUNyeXB0c29m
-dCBQdHkgTHRkMRIwEAYDVQQLEwlTTUlNRSAwMDMxFDASBgNVBAMTC0luZm9ybWF0
-aW9uMSEwHwYJKoZIhvcNAQkBFhJpbmZvQGNyeXB0c29mdC5jb20wXDANBgkqhkiG
-9w0BAQEFAANLADBIAkEArecjie4Nh7ecMkRLlYFz3SKASy3FYLj+Hhhj79yJiSLf
-lTx62z2aBqgI1in970EJke28rZj59iiQYm/n5wxNCwIDAQABoygwJjAkBglghkgB
-hvhCAQ0EFxYVR2VuZXJhdGVkIHdpdGggU1NMZWF5MA0GCSqGSIb3DQEBBAUAA0EA
-UhXqiPTw+QvvztX4g0BhFl5V+c4t0YsxXAPGLRB8YdVcCkKX0f1ltraEpTnsRuz8
-4A3ZItobUHStkstOkOX6fQ==
------END CERTIFICATE-----
-
diff --git a/crypto/openssl/crypto/pkcs7/t/ff b/crypto/openssl/crypto/pkcs7/t/ff
deleted file mode 100644
index 23f013516a51..000000000000
--- a/crypto/openssl/crypto/pkcs7/t/ff
+++ /dev/null
@@ -1,32 +0,0 @@
------BEGIN PKCS7-----
-MIIGHgYJKoZIhvcNAQcCoIIGDzCCBgsCAQExCzAJBgUrDgMCGgUAMAsGCSqGSIb3DQEHAaCC
-BGswggJTMIIB/aADAgECAgIEfjANBgkqhkiG9w0BAQQFADCBkjELMAkGA1UEBhMCQVUxEzAR
-BgNVBAgTClF1ZWVuc2xhbmQxETAPBgNVBAcTCEJyaXNiYW5lMRowGAYDVQQKExFDcnlwdHNv
-ZnQgUHR5IEx0ZDEiMCAGA1UECxMZREVNT05TVFJBVElPTiBBTkQgVEVTVElORzEbMBkGA1UE
-AxMSREVNTyBaRVJPIFZBTFVFIENBMB4XDTk4MDUxMzA2MjY1NloXDTAwMDUxMjA2MjY1Nlow
-gaUxCzAJBgNVBAYTAkFVMRMwEQYDVQQIEwpRdWVlbnNsYW5kMREwDwYDVQQHEwhCcmlzYmFu
-ZTEaMBgGA1UEChMRQ3J5cHRzb2Z0IFB0eSBMdGQxEjAQBgNVBAsTCVNNSU1FIDAwMzEZMBcG
-A1UEAxMQQW5nZWxhIHZhbiBMZWVudDEjMCEGCSqGSIb3DQEJARYUYW5nZWxhQGNyeXB0c29m
-dC5jb20wXDANBgkqhkiG9w0BAQEFAANLADBIAkEAuC3+7dAb2LhuO7gt2cTM8vsNjhG5JfDh
-hX1Vl/wVGbKEEj0MA6vWEolvefQlxB+EzwCtR0YZ7eEC/T/4JoCyeQIDAQABoygwJjAkBglg
-hkgBhvhCAQ0EFxYVR2VuZXJhdGVkIHdpdGggU1NMZWF5MA0GCSqGSIb3DQEBBAUAA0EAUnSP
-igs6TMFISTjw8cBtJYb98czgAVkVFjKyJQwYMH8FbDnCyx6NocM555nsyDstaw8fKR11Khds
-syd3ikkrhDCCAhAwggG6AgEDMA0GCSqGSIb3DQEBBAUAMIGSMQswCQYDVQQGEwJBVTETMBEG
-A1UECBMKUXVlZW5zbGFuZDERMA8GA1UEBxMIQnJpc2JhbmUxGjAYBgNVBAoTEUNyeXB0c29m
-dCBQdHkgTHRkMSIwIAYDVQQLExlERU1PTlNUUkFUSU9OIEFORCBURVNUSU5HMRswGQYDVQQD
-ExJERU1PIFpFUk8gVkFMVUUgQ0EwHhcNOTgwMzAzMDc0MTMyWhcNMDgwMjI5MDc0MTMyWjCB
-kjELMAkGA1UEBhMCQVUxEzARBgNVBAgTClF1ZWVuc2xhbmQxETAPBgNVBAcTCEJyaXNiYW5l
-MRowGAYDVQQKExFDcnlwdHNvZnQgUHR5IEx0ZDEiMCAGA1UECxMZREVNT05TVFJBVElPTiBB
-TkQgVEVTVElORzEbMBkGA1UEAxMSREVNTyBaRVJPIFZBTFVFIENBMFwwDQYJKoZIhvcNAQEB
-BQADSwAwSAJBAL+0E2fLej3FSCwe2A2iRnMuC3z12qHIp6Ky1wo2zZcxft7AI+RfkrWrSGtf
-mfzBEuPrLdfulncC5Y1pNcM8RTUCAwEAATANBgkqhkiG9w0BAQQFAANBAGSbLMphL6F5pp3s
-8o0Xyh86FHFdpVOwYx09ELLkuG17V/P9pgIc0Eo/gDMbN+KT3IdgECf8S//pCRA6RrNjcXIx
-ggF7MIIBdwIBATCBmTCBkjELMAkGA1UEBhMCQVUxEzARBgNVBAgTClF1ZWVuc2xhbmQxETAP
-BgNVBAcTCEJyaXNiYW5lMRowGAYDVQQKExFDcnlwdHNvZnQgUHR5IEx0ZDEiMCAGA1UECxMZ
-REVNT05TVFJBVElPTiBBTkQgVEVTVElORzEbMBkGA1UEAxMSREVNTyBaRVJPIFZBTFVFIENB
-AgIEfjAJBgUrDgMCGgUAoHowGAYJKoZIhvcNAQkDMQsGCSqGSIb3DQEHATAbBgkqhkiG9w0B
-CQ8xDjAMMAoGCCqGSIb3DQMHMBwGCSqGSIb3DQEJBTEPFw05ODA1MTQwMzM5MzdaMCMGCSqG
-SIb3DQEJBDEWBBQstNMnSV26ba8PapQEDhO21yNFrjANBgkqhkiG9w0BAQEFAARAW9Xb9YXv
-BfcNkutgFX9Gr8iXhBVsNtGEVrjrpkQwpKa7jHI8SjAlLhk/4RFwDHf+ISB9Np3Z1WDWnLcA
-9CWR6g==
------END PKCS7-----
diff --git a/crypto/openssl/crypto/pkcs7/t/msie-e b/crypto/openssl/crypto/pkcs7/t/msie-e
deleted file mode 100644
index aafae69fc9d8..000000000000
--- a/crypto/openssl/crypto/pkcs7/t/msie-e
+++ /dev/null
@@ -1,20 +0,0 @@
-
-MIAGCSqGSIb3DQEHA6CAMIACAQAxggHCMIHMAgEAMHYwYjERMA8GA1UEBxMISW50ZXJuZXQxFzAV
-BgNVBAoTDlZlcmlTaWduLCBJbmMuMTQwMgYDVQQLEytWZXJpU2lnbiBDbGFzcyAxIENBIC0gSW5k
-aXZpZHVhbCBTdWJzY3JpYmVyAhBgQJiC3qfbCbjdj5INYLnKMA0GCSqGSIb3DQEBAQUABECMzu8y
-wQ/qZbO8cAGMRBF+mPruv3+Dvb9aWNZ2k8njUgqF6mcdhVB2MkGcsG3memRXJBixvMYWVkU3qK4Z
-VuKsMIHwAgEAMIGZMIGSMQswCQYDVQQGEwJBVTETMBEGA1UECBMKUXVlZW5zbGFuZDERMA8GA1UE
-BxMIQnJpc2JhbmUxGjAYBgNVBAoTEUNyeXB0c29mdCBQdHkgTHRkMSIwIAYDVQQLExlERU1PTlNU
-UkFUSU9OIEFORCBURVNUSU5HMRswGQYDVQQDExJERU1PIFpFUk8gVkFMVUUgQ0ECAgRuMA0GCSqG
-SIb3DQEBAQUABEBcWwYFHJbJGhiztt7lzue3Lc9CH5WAbyR+2BZ3uv+JxZfRs1PuaWPOwRa0Vgs3
-YwSJoRfxQj2Gk0wFqG1qt6d1MIAGCSqGSIb3DQEHATAaBggqhkiG9w0DAjAOAgIAoAQI8vRlP/Nx
-2iSggASCAZhR5srxyspy7DfomRJ9ff8eMCtaNwEoEx7G25PZRonC57hBvGoScLtEPU3Wp9FEbPN7
-oJESeC+AqMTyTLNy8aQsyC5s53E9UkoIvg62ekYZBbXZqXsrxx4PhiiX3NH8GVh42phB0Chjw0nK
-HZeRDmxGY3Cmk+J+l0uVKxbNIfJIKOguLBnhqmnKH/PrnzDt591u0ULy2aTLqRm+4/1Yat/QPb6J
-eoKGwNPBbS9ogBdrCNCp9ZFg3Xar2AtQHzyTQIfYeH3SRQUpKmRm5U5o9p5emgEdT+ZfJm/J4tSH
-OmbgAFsbHQakA4MBZ4J5qfDJhOA2g5lWk1hIeu5Dn/AaLRZd0yz3oY0Ieo/erPWx/bCqtBzYbMe9
-qSFTedKlbc9EGe3opOTdBZVzK8KH3w3zsy5luxKdOUG59YYb5F1IZiWGiDyuo/HuacX+griu5LeD
-bEzOtZnko+TZXvWIko30fD79j3T4MRRhWXbgj2HKza+4vJ0mzcC/1+GPsJjAEAA/JgIEDU4w6/DI
-/HQHhLAO3G+9xKD7MvmrzkoAAAAAAAAAAAAA
-
-
diff --git a/crypto/openssl/crypto/pkcs7/t/msie-e.pem b/crypto/openssl/crypto/pkcs7/t/msie-e.pem
deleted file mode 100644
index a2a5e24e7426..000000000000
--- a/crypto/openssl/crypto/pkcs7/t/msie-e.pem
+++ /dev/null
@@ -1,22 +0,0 @@
------BEGIN PKCS7-----
-MIAGCSqGSIb3DQEHA6CAMIIDkAIBADGCAcIwgcwCAQAwdjBiMREwDwYDVQQHEwhJ
-bnRlcm5ldDEXMBUGA1UEChMOVmVyaVNpZ24sIEluYy4xNDAyBgNVBAsTK1ZlcmlT
-aWduIENsYXNzIDEgQ0EgLSBJbmRpdmlkdWFsIFN1YnNjcmliZXICEGBAmILep9sJ
-uN2Pkg1gucowDQYJKoZIhvcNAQEBBQAEQIzO7zLBD+pls7xwAYxEEX6Y+u6/f4O9
-v1pY1naTyeNSCoXqZx2FUHYyQZywbeZ6ZFckGLG8xhZWRTeorhlW4qwwgfACAQAw
-gZkwgZIxCzAJBgNVBAYTAkFVMRMwEQYDVQQIEwpRdWVlbnNsYW5kMREwDwYDVQQH
-EwhCcmlzYmFuZTEaMBgGA1UEChMRQ3J5cHRzb2Z0IFB0eSBMdGQxIjAgBgNVBAsT
-GURFTU9OU1RSQVRJT04gQU5EIFRFU1RJTkcxGzAZBgNVBAMTEkRFTU8gWkVSTyBW
-QUxVRSBDQQICBG4wDQYJKoZIhvcNAQEBBQAEQFxbBgUclskaGLO23uXO57ctz0If
-lYBvJH7YFne6/4nFl9GzU+5pY87BFrRWCzdjBImhF/FCPYaTTAWobWq3p3UwggHD
-BgkqhkiG9w0BBwEwGgYIKoZIhvcNAwIwDgICAKAECPL0ZT/zcdokgIIBmFHmyvHK
-ynLsN+iZEn19/x4wK1o3ASgTHsbbk9lGicLnuEG8ahJwu0Q9Tdan0URs83ugkRJ4
-L4CoxPJMs3LxpCzILmzncT1SSgi+DrZ6RhkFtdmpeyvHHg+GKJfc0fwZWHjamEHQ
-KGPDScodl5EObEZjcKaT4n6XS5UrFs0h8kgo6C4sGeGqacof8+ufMO3n3W7RQvLZ
-pMupGb7j/Vhq39A9vol6gobA08FtL2iAF2sI0Kn1kWDddqvYC1AfPJNAh9h4fdJF
-BSkqZGblTmj2nl6aAR1P5l8mb8ni1Ic6ZuAAWxsdBqQDgwFngnmp8MmE4DaDmVaT
-WEh67kOf8BotFl3TLPehjQh6j96s9bH9sKq0HNhsx72pIVN50qVtz0QZ7eik5N0F
-lXMrwoffDfOzLmW7Ep05Qbn1hhvkXUhmJYaIPK6j8e5pxf6CuK7kt4NsTM61meSj
-5Nle9YiSjfR8Pv2PdPgxFGFZduCPYcrNr7i8nSbNwL/X4Y+wmMAQAD8mAgQNTjDr
-8Mj8dAeEsA7cb73EoPsy+avOSgAAAAA=
------END PKCS7-----
diff --git a/crypto/openssl/crypto/pkcs7/t/msie-enc-01 b/crypto/openssl/crypto/pkcs7/t/msie-enc-01
deleted file mode 100644
index 2c93ab646268..000000000000
--- a/crypto/openssl/crypto/pkcs7/t/msie-enc-01
+++ /dev/null
@@ -1,62 +0,0 @@
-
-MIAGCSqGSIb3DQEHA6CAMIACAQAxgfMwgfACAQAwgZkwgZIxCzAJBgNVBAYTAkFVMRMwEQYD
-VQQIEwpRdWVlbnNsYW5kMREwDwYDVQQHEwhCcmlzYmFuZTEaMBgGA1UEChMRQ3J5cHRzb2Z0
-IFB0eSBMdGQxIjAgBgNVBAsTGURFTU9OU1RSQVRJT04gQU5EIFRFU1RJTkcxGzAZBgNVBAMT
-EkRFTU8gWkVSTyBWQUxVRSBDQQICBG4wDQYJKoZIhvcNAQEBBQAEQKvMaW8xh6oF/X+CJivz
-IZV7yHxlp4O3NHQtWG0A8MOZB+CtKlU7/6g5e/a9Du/TOqxRMqtYRp63pa2Q/mM4IYMwgAYJ
-KoZIhvcNAQcBMBoGCCqGSIb3DQMCMA4CAgCgBAifz6RvzOPYlKCABIGwxtGA/FLBBRs1wbBP
-gDCbSG0yCwjJNsFg89/k6xuXo8c5YTwsw8+XlIVq03navpew6XxxzY090rD2OJ0t6HA6GqrI
-pd8WiSh/Atqn0yfLFmkLqgIAPRfzxUxqUocxLpQsLIFp2YNUGE+yps+UZmIjw/WHfdqrcWTm
-STSvKuy3UkIJZCkGDBpTvqk4BFaHh4oTXEpgpNY+GKxjf9TDN9GQPqQZR7sgQki4t2g4/Saq
-Kl4EMISgluk6swdND0tiHY7v5d6YR29ePCl2/STJ98eJpWkEEC22GNNvOy7ru/Rv2He4MgQg
-optd7sk9MMd9xhJppg7CcH/yDx//HrtgpOcWmn6VxpgECFqon4uXkQtIBIH4PaNclFn7/hLx
-Pw2VmBGaC0SYF3U1jyN96EBxdjqy8Aa6ByMXYDW5BcfqniD5mYXfw+b81lh1kutxaPaV4YJ9
-ZlRUW752N7VHo/fG0/fukoe5W9a8kIhgLpygllb/GP4oSF4wM6n1/OgRzZj2IWFiobKO4d/t
-Mnh+C+PoEVAuFZcxQwi9GqvsK5OoIjVwNx0XcVSOl1TTYS9SwC7ugMBCab73JiruC24pL78Y
-M+NaIpIQ3On4DokJA2ZHtjBjZIxF4tKA144RvFN6pBd6TVE5XM6KD/Vh9bjSmujtEAfdQ3Te
-dvKJsbZuu0stErbvWcRy11I328l557EECAJT7d44OJ3rBBBj6bnnx6dDU2SRqp2CEoQaBAhK
-RBuyhNxkygQIOY9/NhwqAJAECOvX0Zd0DqgoBAjobPpMHhVV3gQQWLU2vEoZ51BwzxdzCmxO
-wwQI4oKfudaNqoAESKzBNAqv5kGumHOlMKsRfrs7jZCcSaOuEj97pYx08FLEgF23cav39MOQ
-NUEM1dNU+EYslL4o3RoSHRjUgPU+2t9c0prS9A/bPARIEOP94PynaTNxwHi3VTK7SzuQmgzA
-4n942E9joSiqsQPlsKAb3sPUaLC3SuUxSjNBgfpvD0bmrA/5h+WZoYXvIogFpwjkSmnFBEie
-0lh5Ov1aRrvCw5/j3Q/W/4ZtN5U+aeVBJMtA8n0Mxd5kPxHbNVh4oGprZ6wEegV8ht3voyZa
-mZ5Cyxc8ffMYnM/JJI6/oEYEUEMyyiS5FnYyvxKzfMtyn2lZ2st9nZGNNgMc9N62r5HgNbdD
-FHuRdKKzV+8kQfuMc3mOPpK1t9TFY+QgrxiB5p6S7VooI97YtP3PbfknszCEBEh4PdXYbbaR
-3AacN3Q5kYYmWsq3WW6xgrg0mmEGosGvwSQxBBuiXZrxScCa4ivEq05UZwyShePvKduOvnUE
-2zDO6IXFLZxhTZAESEm9/FovLgGAiJ7iMGmYvsISLJScwG4n+wrSaQNQXizs9N3ykys54wBN
-d/+BQ4F7pncHhDQ2Dyt5MekB8Y8iNOocUTFCu524vQRIaWCXmXP3vU7D21dp0XnAMzRQJ565
-JV3aHRoY7XDa4LePa7PP9ywyafOE5yCW7ndqx3J+2JhTDvSFsW8/q3H3iyeFhykuJVS6BFDK
-6CmKbnyyjOfE2iLGJmTFa905V2KrVDCmlEu/xyGMs80yTyZC+ySzM83FMVvLEQmSzcTNUZVp
-DfA1kNXbXkPouBXXT6g8r8JCRljaKKABmgRIlMheOJQRUUU4cgvhMreXPayhq5Ao4VMSCkA5
-hYRCBczm4Di/MMohF0SxIsdRY6gY9CPnrBXAsY6h1RbR7Tw0iQZmeXi52DCiBEj0by+SYMAa
-9z0CReIzl8JLL6EVIFz8kFxlkGWjr4dnOzhhPOq/mCpp0WxbavDfdhE87MdXJZBnLwoT62QG
-955HlAoEQBOGJbcESCgd5XSirZ9Y3AbCfuKOqoMBvEUGn+w/pMaqnGvnr5FZhuBDKrhRXqtx
-QsxA//drGUxsrZOuSL/0+fbvo7n2h1Z8Ny86jOvVZAQIAjw2l1Yc5RAESNc9i3I8pKEOVQf/
-UBczJ0NR9aTEF80dRg2lpXwD0ho4N0AvSiVbgxC7cPZHQwIqvq9LHRUs/4n+Vu3SVYU3cAxo
-lUTiCGUSlARIF+TD57SI5+RI+MNtnD9rs4E1ml51YoHGWFj3UPriDmY0FKEwIgqtMXMY3fZ9
-Kq8d83bjDzxwbDX7WwR7KbSeJWT42pCz7kM+BEjjPsOnZHuusXT3x2rrsBnYtYsbt98mSFiS
-KzTtFmXfkOBbCQdit1P76QnYJ1aXMGs6zP6GypQTadK/zYWvlm38QkVwueaJ0woESKW2pqKA
-70h2UMDHOrpepU1lj0YMzmotDHSTU3L909VvUMNg9uqfrQ6mSkb9j5Tl8oF2otOw5EzA1Yda
-KPmgsv62RWLYl80wXQRQwG0e/mgG75jp9lOhJdVXqcYbQpS9viwVaVkwH+69mu/bQI4gjoEs
-UYX6O71Re2z+cYhcm9UrK+DXuSFBXQOIlAFxKMW4B0apd6fU84FsZLMESOorXE5OE0A2B2ji
-J8QI0Exk4hUvWrMNJfUZwFyS7E05xV9ORuX1xmsKqkT4tVR5Nqln4vhvAY860VBoloz0CDkd
-8seSBEjeMgRI9FvpYuflIeHg9urkwp6N+1f0DrJJhJY9ZQ0HTQhziJmIfvbEjNqCl7hEC28+
-F8I5tuViLgfSwcFFCvnS6WFoN4X6QdFdqMCbBEjdlI1c+IQGA/IuTDMJYCuQ/v+8BG5ZeWVH
-icPZmXfRat9eFK1dGKAJef6+Tf9HPuDjSpDyffrifsp7Dc34lmm7GN1+ON3ZMtwEUNm6epb8
-1RKWjoI7jIKUV/M2p/0eeGSqs4b06KF/VR6dBwsJVL5DpnTsp3MV4j/CAOlRdSPZ5++tsKbM
-aplk+ceqQtpEFz1MYTtVV4+rlrWaBEA1okJyNZ5/tNOwM7B+XfOZ0xw+uyVi9v4byTZM2Qds
-J+d3YGYLAugTGHISLqQEerD8/gGK+/SL06b2gNedXPHtBAiBKX+Mdy3wFQQIqE9gVgvrFNUE
-CKKoTFoMGqnPBAjDPgLCklNfrwQI3Ek1vSq68w8ECBodu2FOZJVkBAgzwjfSr2N9WQQQTCoQ
-KkAbrS9tnjXn1I3+ZwQIrPx3eINo/YUECIeYWCFskxlYBAiDUdvZXwD3vgQIkEyZbbZWbUUE
-CH4+odl1Isk3BBj68fkqJ0fKJRWVLWuW/O3VE4BOPKwFlaIECFseVTdDUho8BAj+cOKvV2WA
-hgQgaXr+wwq+ItblG0Qxz8IVUXX6PV2mIdHwz4SCCvnCsaIECJhBYxdfLI/XBCDswamPn9MR
-yXi2HVQBineV+GtWVkIoZ2dCLFB9mQRMoAQI0nUR5a5AOJoECA+AunKlAlx8BAi5RtFeF4g1
-FQQIz/ie+16LlQcECOmNuVg5DXjMBAjH2nkfpXZgWwQIVdLuO/+kuHAECO/5rEHmyI9vBBD4
-16BU4Rd3YerDQnHtrwOQBCCkho1XxK5Maz8KLCNi20wvcGt8wsIXlj2h5q9ITBq7IgQQvKVY
-4OfJ7bKbItP2dylwQgQYPIGxwkkbRXNraONYvN19G8UdF35rFOuIBAjf0sKz/618ZQQIxObr
-xJkRe0sECIC+ssnjEb2NBBBI+XM4OntVWGsRV9Td3sFgBAinGwIroo8O0gQQMGAwgc9PaLaG
-gBCiwSTrYQQIVHjfCQgOtygEUIoraFoANfhZgIShpOd/RRxFU4/7xZR5tMdGoYz/g0thR0lM
-+Hi88FtFD4mAh/Oat4Ri8B7bv04aokjN2UHz6nPbHHjZ8zIqpbYTCy043GNZBAhOqjyB2JbD
-NwQoR23XCYD9x6E20ChHJRXmaHwyMdYXKl5CUxypl7ois+sy2D7jDukS3wQIsTyyPgJi0GsA
-AAAAAAAAAAAA
-
diff --git a/crypto/openssl/crypto/pkcs7/t/msie-enc-01.pem b/crypto/openssl/crypto/pkcs7/t/msie-enc-01.pem
deleted file mode 100644
index 9abf00b2f245..000000000000
--- a/crypto/openssl/crypto/pkcs7/t/msie-enc-01.pem
+++ /dev/null
@@ -1,66 +0,0 @@
------BEGIN PKCS7-----
-MIAGCSqGSIb3DQEHA6CAMIILyAIBADGB8zCB8AIBADCBmTCBkjELMAkGA1UEBhMC
-QVUxEzARBgNVBAgTClF1ZWVuc2xhbmQxETAPBgNVBAcTCEJyaXNiYW5lMRowGAYD
-VQQKExFDcnlwdHNvZnQgUHR5IEx0ZDEiMCAGA1UECxMZREVNT05TVFJBVElPTiBB
-TkQgVEVTVElORzEbMBkGA1UEAxMSREVNTyBaRVJPIFZBTFVFIENBAgIEbjANBgkq
-hkiG9w0BAQEFAARAq8xpbzGHqgX9f4ImK/MhlXvIfGWng7c0dC1YbQDww5kH4K0q
-VTv/qDl79r0O79M6rFEyq1hGnrelrZD+YzghgzCCCssGCSqGSIb3DQEHATAaBggq
-hkiG9w0DAjAOAgIAoAQIn8+kb8zj2JSAggqgxtGA/FLBBRs1wbBPgDCbSG0yCwjJ
-NsFg89/k6xuXo8c5YTwsw8+XlIVq03navpew6XxxzY090rD2OJ0t6HA6GqrIpd8W
-iSh/Atqn0yfLFmkLqgIAPRfzxUxqUocxLpQsLIFp2YNUGE+yps+UZmIjw/WHfdqr
-cWTmSTSvKuy3UkIJZCkGDBpTvqk4BFaHh4oTXEpgpNY+GKxjf9TDN9GQPqQZR7sg
-Qki4t2g4/SaqKl6EoJbpOrMHTQ9LYh2O7+XemEdvXjwpdv0kyffHiaVpBBAtthjT
-bzsu67v0b9h3uDKim13uyT0wx33GEmmmDsJwf/IPH/8eu2Ck5xaafpXGmFqon4uX
-kQtIPaNclFn7/hLxPw2VmBGaC0SYF3U1jyN96EBxdjqy8Aa6ByMXYDW5BcfqniD5
-mYXfw+b81lh1kutxaPaV4YJ9ZlRUW752N7VHo/fG0/fukoe5W9a8kIhgLpygllb/
-GP4oSF4wM6n1/OgRzZj2IWFiobKO4d/tMnh+C+PoEVAuFZcxQwi9GqvsK5OoIjVw
-Nx0XcVSOl1TTYS9SwC7ugMBCab73JiruC24pL78YM+NaIpIQ3On4DokJA2ZHtjBj
-ZIxF4tKA144RvFN6pBd6TVE5XM6KD/Vh9bjSmujtEAfdQ3TedvKJsbZuu0stErbv
-WcRy11I328l557ECU+3eODid62PpuefHp0NTZJGqnYIShBpKRBuyhNxkyjmPfzYc
-KgCQ69fRl3QOqCjobPpMHhVV3li1NrxKGedQcM8XcwpsTsPigp+51o2qgKzBNAqv
-5kGumHOlMKsRfrs7jZCcSaOuEj97pYx08FLEgF23cav39MOQNUEM1dNU+EYslL4o
-3RoSHRjUgPU+2t9c0prS9A/bPBDj/eD8p2kzccB4t1Uyu0s7kJoMwOJ/eNhPY6Eo
-qrED5bCgG97D1Giwt0rlMUozQYH6bw9G5qwP+YflmaGF7yKIBacI5EppxZ7SWHk6
-/VpGu8LDn+PdD9b/hm03lT5p5UEky0DyfQzF3mQ/Eds1WHigamtnrAR6BXyG3e+j
-JlqZnkLLFzx98xicz8kkjr+gRkMyyiS5FnYyvxKzfMtyn2lZ2st9nZGNNgMc9N62
-r5HgNbdDFHuRdKKzV+8kQfuMc3mOPpK1t9TFY+QgrxiB5p6S7VooI97YtP3Pbfkn
-szCEeD3V2G22kdwGnDd0OZGGJlrKt1lusYK4NJphBqLBr8EkMQQbol2a8UnAmuIr
-xKtOVGcMkoXj7ynbjr51BNswzuiFxS2cYU2QSb38Wi8uAYCInuIwaZi+whIslJzA
-bif7CtJpA1BeLOz03fKTKznjAE13/4FDgXumdweENDYPK3kx6QHxjyI06hxRMUK7
-nbi9aWCXmXP3vU7D21dp0XnAMzRQJ565JV3aHRoY7XDa4LePa7PP9ywyafOE5yCW
-7ndqx3J+2JhTDvSFsW8/q3H3iyeFhykuJVS6yugpim58soznxNoixiZkxWvdOVdi
-q1QwppRLv8chjLPNMk8mQvskszPNxTFbyxEJks3EzVGVaQ3wNZDV215D6LgV10+o
-PK/CQkZY2iigAZqUyF44lBFRRThyC+Eyt5c9rKGrkCjhUxIKQDmFhEIFzObgOL8w
-yiEXRLEix1FjqBj0I+esFcCxjqHVFtHtPDSJBmZ5eLnYMKL0by+SYMAa9z0CReIz
-l8JLL6EVIFz8kFxlkGWjr4dnOzhhPOq/mCpp0WxbavDfdhE87MdXJZBnLwoT62QG
-955HlAoEQBOGJbcoHeV0oq2fWNwGwn7ijqqDAbxFBp/sP6TGqpxr56+RWYbgQyq4
-UV6rcULMQP/3axlMbK2Trki/9Pn276O59odWfDcvOozr1WQCPDaXVhzlENc9i3I8
-pKEOVQf/UBczJ0NR9aTEF80dRg2lpXwD0ho4N0AvSiVbgxC7cPZHQwIqvq9LHRUs
-/4n+Vu3SVYU3cAxolUTiCGUSlBfkw+e0iOfkSPjDbZw/a7OBNZpedWKBxlhY91D6
-4g5mNBShMCIKrTFzGN32fSqvHfN24w88cGw1+1sEeym0niVk+NqQs+5DPuM+w6dk
-e66xdPfHauuwGdi1ixu33yZIWJIrNO0WZd+Q4FsJB2K3U/vpCdgnVpcwazrM/obK
-lBNp0r/Nha+WbfxCRXC55onTCqW2pqKA70h2UMDHOrpepU1lj0YMzmotDHSTU3L9
-09VvUMNg9uqfrQ6mSkb9j5Tl8oF2otOw5EzA1YdaKPmgsv62RWLYl80wXcBtHv5o
-Bu+Y6fZToSXVV6nGG0KUvb4sFWlZMB/uvZrv20COII6BLFGF+ju9UXts/nGIXJvV
-Kyvg17khQV0DiJQBcSjFuAdGqXen1POBbGSz6itcTk4TQDYHaOInxAjQTGTiFS9a
-sw0l9RnAXJLsTTnFX05G5fXGawqqRPi1VHk2qWfi+G8BjzrRUGiWjPQIOR3yx5IE
-SN4y9FvpYuflIeHg9urkwp6N+1f0DrJJhJY9ZQ0HTQhziJmIfvbEjNqCl7hEC28+
-F8I5tuViLgfSwcFFCvnS6WFoN4X6QdFdqMCb3ZSNXPiEBgPyLkwzCWArkP7/vARu
-WXllR4nD2Zl30WrfXhStXRigCXn+vk3/Rz7g40qQ8n364n7Kew3N+JZpuxjdfjjd
-2TLc2bp6lvzVEpaOgjuMgpRX8zan/R54ZKqzhvTooX9VHp0HCwlUvkOmdOyncxXi
-P8IA6VF1I9nn762wpsxqmWT5x6pC2kQXPUxhO1VXj6uWtZo1okJyNZ5/tNOwM7B+
-XfOZ0xw+uyVi9v4byTZM2QdsJ+d3YGYLAugTGHISLqQEerD8/gGK+/SL06b2gNed
-XPHtgSl/jHct8BWoT2BWC+sU1aKoTFoMGqnPwz4CwpJTX6/cSTW9KrrzDxodu2FO
-ZJVkM8I30q9jfVlMKhAqQButL22eNefUjf5nrPx3eINo/YWHmFghbJMZWINR29lf
-APe+kEyZbbZWbUV+PqHZdSLJN/rx+SonR8olFZUta5b87dUTgE48rAWVolseVTdD
-Uho8/nDir1dlgIZpev7DCr4i1uUbRDHPwhVRdfo9XaYh0fDPhIIK+cKxophBYxdf
-LI/X7MGpj5/TEcl4th1UAYp3lfhrVlZCKGdnQixQfZkETKDSdRHlrkA4mg+AunKl
-Alx8uUbRXheINRXP+J77XouVB+mNuVg5DXjMx9p5H6V2YFtV0u47/6S4cO/5rEHm
-yI9v+NegVOEXd2Hqw0Jx7a8DkKSGjVfErkxrPwosI2LbTC9wa3zCwheWPaHmr0hM
-GrsivKVY4OfJ7bKbItP2dylwQjyBscJJG0Vza2jjWLzdfRvFHRd+axTriN/SwrP/
-rXxlxObrxJkRe0uAvrLJ4xG9jUj5czg6e1VYaxFX1N3ewWCnGwIroo8O0jBgMIHP
-T2i2hoAQosEk62FUeN8JCA63KIoraFoANfhZgIShpOd/RRxFU4/7xZR5tMdGoYz/
-g0thR0lM+Hi88FtFD4mAh/Oat4Ri8B7bv04aokjN2UHz6nPbHHjZ8zIqpbYTCy04
-3GNZTqo8gdiWwzdHbdcJgP3HoTbQKEclFeZofDIx1hcqXkJTHKmXuiKz6zLYPuMO
-6RLfsTyyPgJi0GsAAAAA
------END PKCS7-----
diff --git a/crypto/openssl/crypto/pkcs7/t/msie-enc-02 b/crypto/openssl/crypto/pkcs7/t/msie-enc-02
deleted file mode 100644
index 70170559651f..000000000000
--- a/crypto/openssl/crypto/pkcs7/t/msie-enc-02
+++ /dev/null
@@ -1,90 +0,0 @@
-
-MIAGCSqGSIb3DQEHA6CAMIACAQAxggHCMIHMAgEAMHYwYjERMA8GA1UEBxMISW50ZXJuZXQxFzAV
-BgNVBAoTDlZlcmlTaWduLCBJbmMuMTQwMgYDVQQLEytWZXJpU2lnbiBDbGFzcyAxIENBIC0gSW5k
-aXZpZHVhbCBTdWJzY3JpYmVyAhBgQJiC3qfbCbjdj5INYLnKMA0GCSqGSIb3DQEBAQUABEACr4tn
-kSzvo3aIlHfJLGbfokNCV6FjdDP1vQhL+kdXONqcFCEf9ReETCvaHslIr/Wepc5j2hjZselzgqLn
-rM1ZMIHwAgEAMIGZMIGSMQswCQYDVQQGEwJBVTETMBEGA1UECBMKUXVlZW5zbGFuZDERMA8GA1UE
-BxMIQnJpc2JhbmUxGjAYBgNVBAoTEUNyeXB0c29mdCBQdHkgTHRkMSIwIAYDVQQLExlERU1PTlNU
-UkFUSU9OIEFORCBURVNUSU5HMRswGQYDVQQDExJERU1PIFpFUk8gVkFMVUUgQ0ECAgRuMA0GCSqG
-SIb3DQEBAQUABEBanBxKOvUoRn3DiFY55lly2TPu2Cv+dI/GLrzW6qvnUMZPWGPGaUlPyWLMZrXJ
-xGXZUiRJKTBwDu91fnodUEK9MIAGCSqGSIb3DQEHATAaBggqhkiG9w0DAjAOAgIAoAQImxKZEDWP
-EuOggASCBACBi1bX/qc3geqFyfRpX7JyIo/g4CDr62GlwvassAGlIO8zJ5Z/UDIIooeV6QS4D4OW
-PymKd0WXhwcJI0yBcJTWEoxND27LM7CWFJpA07AoxVCRHTOPgm794NynLecNUOqVTFyS4CRuLhVG
-PAk0nFZG/RE2yMtx4rAkSiVgOexES7wq/xWuoDSSmuTMNQOTbKfkEKqdFLkM/d62gD2wnaph7vKk
-PPK82wdZP8rF3nUUC5c4ahbNoa8g+5B3tIF/Jz3ZZK3vGLU0IWO+i7W451dna13MglDDjXOeikNl
-XLsQdAVo0nsjfGu+f66besJojPzysNA+IEZl6gNWUetl9lim4SqrxubUExdS2rmXnXXmEuEW/HC7
-dlTAeYq5Clqx5id6slhC2C2oegMww3XH9yxHw6OqzvXY6pVPEScEtBMQLgaKFQT+m2SRtbTVFG7c
-QcnUODyVB1IbpQTF1DHeeOX1W/HfpWZym8dzkti6SCyeumHmqO406xDiIMVKtHOqM86nEHuAMZsr
-cLy+ey6TEJvR6S4N8QRzng8JJDZDTJXQN6q84aEudsnOrw2KyOVwPpI6ey4qBsHUgQ8kAFy5lsQa
-WV45h6exgUwbBcKLgPZGFj+OdD2RKJsTb83/UqbJS5Q/lGXhzBlnaYucyJxEprRxbntmcnOEPFJe
-+tRDUwOTd7qlJljdhIJL+uDcooL9Ahgo6Cwep6tduekv2cSEohJeTE8Dvy34YRhMbLvnFNdmnpNy
-rNZDYVVxxaKoyd2AfB8NPFZh1VdAYfI3R1QAQ2kXEef5NNIfVQfMzD9akJn4RP+Kv32Qaxm4FrnK
-xmwRyGJShavIBc2ax+F1r1+NZXuSBHn5vfoRTxOk0ST4dXsw74dnlYUMRaSu4qqUdM9jsXSyeX4Z
-gQgkR2bkaYO6ezFgenFIa7QWVw8rXZAEZ5aibCxbnY1VE41PYIvhlLdbFJhH9gY22s+fFAuwnzyA
-SRjC40A9aAEItRlaPStWSGiqlLRgNkBBwdpv2l2YPBd2QzHx6ek6XGrvRJuAC+Nh62rtQKwpNH54
-YAOHW55maBFW2SQ3TF+cZ6NbbqhCmHTyyR7mcSYc9sXSVDWEhYKQ1iyU870zhHWVpvglZizZetJC
-ZFjYex3b1ngVdcgargOvpPq9urCKKi2mbkqv/EFpzSWGXkKSpfCG/XfMnEOtkNrB8S06vnk2JcJB
-OBqJot+uuSH5hOg0vTpxX2DuONJSiWSWyfRE/lTfJJFXwhod7SXclUyXPeSyibcSic2hVAzDmwjD
-31js/j2k02PI/agPhr3UQ8cMgcNAiaoCKbNaWfn6BGbCAbTchxzUlo2cSJiLlrX2IDZmfXbXmZCo
-m1smWIG+BIIEALiuAxDb6dWLAYyVBoN9hYI4AiPeZAY9MtvQ6AV8o2/EFm6PvYGXy3Hei5830CH0
-PBeX7Kdd6ff1y33TW/l5qSkIL1ULTGR7okFfJePHDmq1dFt6/JOMptiQ8WSu7CsJQvZ9VTFXeYFc
-ZqCPPZc1NrPegNK70Zf9QxWIbDAevJ5KLBf1c6j8pU2/6LnvDY6VjaTvYSgr7vTR8eVzH4Rm77W0
-iOHxg5VcODv6cGSVyuvbX8UAGo8Cmb58ERDtBDJBQXVpWKLNAuDJ9GX8n2zNkpjZLbPSkcmuhqGa
-BJBE/BaCTkUQWlY9dIbRtEnxIU1mfbPPdx1Ppa8DqGDjSOsQdKcKYNNZtayEw++EIpmpdBNsKphC
-fB8UEK2Wkk4ZVW+qyGoi/r0MFsvO1NmSOOZ0o/jy/YHmoeURHhPy97AO3eVTkEAa5CfJEJybmo56
-7CDw/FwoGAUCgsoz7rlxzMudr/IhHIH+APinncxXlHO2ecvHD9i8DaHGA8tVifgsUhqQoZieULut
-eF94O5UAxOkv41UZssYTwN4nYrN1QkesZl3BX4ORS4EE30/PQ23ARf3WZptZrCJevGm2ZYzGeh8x
-g17mCDfiLO+bff4qP/4mC96Pu4ia6j4to5BwKIJS/+DCuoD8WeSKF4pugXQkMUiHdQnNnVP9Sp2O
-/4ly5mO8JzrQC59V2bnTNBqPhpno8kfJvK5TypPSVC+bTzern3rJ6UceB3srcn9zxKx9GdNydJQj
-yWjv8ec3n3d1nuQwhz5Q053NBhIjwoGg3Go7LO6i78ZOlpF7dcoAO13NfHLyNjnyHCaiWtVRTct9
-rLf5vN00urSn8YJngHk1eTKK8nHGIcOg6YdYDOD2nE5XwRijKmieG8Xa3eKRzfbL06GrBQENle6J
-mC131bp3cRVxpjq+o6RAbGoMm4yICsL4eTarCQrsyHmoPHqr91UHo91avyxU7knWmEhX27ybmsrs
-8aeZwPHixL14TeyhruCqRVvkf1Ks7P+z8MPUboGNqQe2WLN8ktCGEr15O8MJR/em86G03Jfo4oaw
-/DVUH5RwLT6acedOGuzMh/2r8BcmemhVQ8/cWvV4YJ0tOW4hzyVHC5hQf8sZ3LzxXLH6Ohnrbprh
-xvrdbaSdChWZDDP0bCCbxEhkwuBkBeKZrMbwRTP+TPTPYLVTH/CmKLzKh/114tkGkyO3hHS4qExU
-V39F2Sj4mylx+hD0+20D9pntpNi7htccGlOm6yNM69at/3+kLgJJyoIlaxLcCUYHNMifDt+T3p/t
-5U4XmD53uUQ6M8dvj/udqPekNSUfse15yrd9pjOt5PcJuqW28q0sFHf9pHIgz3XZFMe5PD7ppw6r
-S+C6Ir4PrYIEggQA7ZDVtiCm+BbtNNB/UJm79/OQ5mp5bTI0kPmDeycaWTa0Ojpum+c/dpG/iJOB
-DICj7jHOXSHT7JlGyX6aSFJUltucAnZvwzhPDmdDaIDiKSk85GqgdDWVfGosSCX9Ph/T3WpIxnwf
-WSDRtIHkWTjly+pe4yy5K6/XISy/L5Zh/fhiI5fjHjgzmlibs2ru4nVw6hBhUvlSSe2BEs5d9h/y
-NH8Wy3qvb2D3jh7hkepFtZJGNTHp8ZUC7Ns2JIpQYObsaxdI65i3mMOu7fRwI+0/4ejsWhP6KCEi
-LgwvLg0qM82ma6YB7qHAHboaczRVEffDcJUG4a5uycB0DoZFn+uEaEFyili20hCn4hVfsqUQk2PT
-8Mo1tSl5e30xI1YJZrRgiJm9nHRX6fLizngP+ILJLPHZsPvlSVIfY+/v/FR8feKOjaGhyGF51BAx
-aM2NIQ4jMP5/X+U5gQybi0E6u7rroDhaHsKmCMgXqszwXWCpedA/sEbeHpiTC59YlPPSlIOMc9vP
-Ko/mQCfWy/9icUaIfKQldvkllUxxNkqu6AbIpHVscbAEzSPs5xbQXU8EZNNCDisFnnpY3nQ3eLnl
-m89saTJxRb7NWHRMlmPv7qgD7uMIq3vdOGA7i5wT9MeoNIgK1/DsgH30s6RWjJy4YyyLmRTXPzbj
-hbQVpEmiMRbEidIvUx2OjKVxVQIcgtLsa2lvHQ4XL1cpLr5GVtOgy0fMg5OCDUUDsvjgjgLQ3P2U
-p2nVY5FM6/QpPc5DTLuuR9ekI2/c9Biz09RtcYDUQK2ajdo8h1IyKqHFoB7h48OXxXKKY94DY0TG
-x6PonB/epj8orAw4QKmm5M0vXYwBOqRymCTHTqOJGObdLx1euFFyqguzHJOU2gAGZI0z9Lg1yRuF
-yhdPZyuniIcmtLNxRZ1duYHErcAyX56qndmLXt7UVkATai/rIMuoJLfAsUnVuTUS5p7tJM754UZT
-7lTcXvDJgOUNnBRaIcxC3pxvbrYDJ2iFJ72xkxUP2p74gucqg25XnCVmQuLg6zDDxF6CLuw9isxy
-Xg4pkneMN//7fpp8GYl9nyZm2yqYYM+jcw0fcVc64L+X4w/gL3H2UMGgxIHSJp7HIG7VKHtXrNyj
-dPXXPVUsMsAAimqOr0Lr2sZWirfuivLaPTqhbkvG5PF7K3gT80AOIcd/6EIHBy2hZ7ukfjHmdP4L
-yQOhTQklaKzGHI0mypq0uFLWJOUlZnVrMiLP1xrWkpC8Ro9eo6mfjjQ45z8adC43a47klwTEzvod
-3rNEFIGJJUEjAN3mbqie7IxoSJknBBJK0D9lZEQ8lZWlq7vuN8JdqPM6xh155jMVsPwjLK6Tzkj5
-BpRD9Tgm3u6HPQSCBADgkWEN75Mu9TGosXY0xm1k6K6sPv8L949CrLWo4r1I2LA072bTGvQP28Vs
-hUA76jgcT1ocC++9PoktIK10YCq5w+FfMAQ04KeCXuAdmiY2iAT4Slea61PMCMta3mVGyLUZCLEm
-P+I0UKR5mlO0fGEcjU9j8TmbjZqxNFqloLsU7oSi7Os0EtYHkdAVrExUyOc/ZDie6fBjdLTmLdCm
-bE9JNwjlbXypdTZupGgLNhKGDIskUAAMwZYayI6YfSIMkNCeAYTnjOuGZZ1msCXGXsfMBR1sfUIj
-9UeGjwD8gq+UVVHX/oeoH/m0eJ5ppqi3+nUlgc9DvpYsC/Fg0G2KuYb9B+VJ+a4GMzQSPREoFtQp
-B9dtLkBb7Ha/hpGWTIdqzW0eAo5llyN8FNvl2Fu2IcLaNmWFO69gLjRKQopp0dvFOuwAVI6fvGDj
-p1WigoNbFZl8N+iiWmzKOjoG2ZLbez1clZCms/JPJrXhEMMOxWpVzkQyN336VWHmGgMcjaKCGSeA
-2nnESIGuiCXMrkHlGfabYIsKcHFCo2t13uXyZPf0zSPTkuD0Eh92wqC9pvA3gvrrCUfo9Mn3bs+e
-KWKmDlpcs8mDn032oIg+zrQhIduMqXVn3evzeVM3B5MBOGMvg51/SXg7R+MC/463juQQEb9IVe/I
-YGnO//oWm9lw/377Af/qH+FnN02obJw1FvesQIs9e5RHNQykKbO+vmVJQl1nd9DZWrHDNO7/80Yz
-2hCm7Tws5nSRN2iFlyRaYJHr7ypxkU2rCak2r6ua7XDwu1qU2RT3+qPjT1RuxQ2oTlHyGkKPMZGC
-Rc+CSWz5aeeCmHZVwdb3nC8YpfsujMiYqygLeuQ82pjKuR7DIKGmnfcOLdv5F+Ek2Wyy0D98iSgk
-+aoQGYLhL9llU13pn21uRsDY5uGcXiIw1IETFlTdgENEv8futZuJsegrp7fmFXyNoNyFNyypeDrM
-6ZqR4vKxFjg3tKKeVpkw/W4EAklzMxmNiazGNDBHsnYV3rwPlKa+HeeE2YxnsKwGLCNgRYUXTaJk
-461vS160z3dvh/mLfdZ7MYCkmO3bNE3ELUDAw7YQkSuo9ujzdFKte9LC34sjg9fOex3ThAg5Y50n
-wYm4zBmGM7yEqL8O6QgnM6tIDFS9XryDaLNzcGhMWqMvhzO6sC/AA2WfLgwS517Cp03IkJQWqG9q
-w52+E+GAtpioJfczEhlv9BrhjttdugRSjJrG8SYVYE4zG3Aur5eNBoGaALIOHOtPw8+JovQmIWcF
-oaJ/WQuglFrWtew51IK6F8RiHAOBVavZOuZcO7tV+5enVfreOd0rX8ZOy4hYmHhmF1hOrrWOn+Ee
-E0SYKonXN01BM9xMBIIBSLCvNAppnGPTUGjwbMJRg1VJ2KMiBWH5oJp8tyfIAxMuWFdtaLYbRSOD
-XbOAshPVK8JAY8DQDkzqaCTAkLTfSRAt9yY6SbUpMsRv7xa8nMZNJBJzJT9b/wNjgiOJgaGuJMkV
-2g/DX2jfP3PrMM/Sbnz7edORXHj1Pa5XTT8nG5MS0FuZgvevdq3o/gVVAz+ZCKOH3ShMzZvfp01l
-SX5gaJTflmU6cdNwtn2yZ6IScF7OrjUeA9iEoSVR9dQcA+4lB3RAG3LMwcnxXY35D7+PMJzHIZdF
-cSnq+n03ACY2/E/T31iijRH29rvYHGI+mP/ieYs45iq4fTWo6i1HofeWLdP0fX7xW3XO0/hWYFiw
-BxKu66whAbRhaib3XJNvetVs25ToYXyiDpjG+cd5rCMei8sGQwTBj9Zeh0URoeMW1inTP0JvCmMU
-rZgAAAAAAAAAAAAA
-
diff --git a/crypto/openssl/crypto/pkcs7/t/msie-enc-02.pem b/crypto/openssl/crypto/pkcs7/t/msie-enc-02.pem
deleted file mode 100644
index 279c5d830b07..000000000000
--- a/crypto/openssl/crypto/pkcs7/t/msie-enc-02.pem
+++ /dev/null
@@ -1,106 +0,0 @@
------BEGIN PKCS7-----
-MIAGCSqGSIb3DQEHA6CAMIITQAIBADGCAcIwgcwCAQAwdjBiMREwDwYDVQQHEwhJ
-bnRlcm5ldDEXMBUGA1UEChMOVmVyaVNpZ24sIEluYy4xNDAyBgNVBAsTK1ZlcmlT
-aWduIENsYXNzIDEgQ0EgLSBJbmRpdmlkdWFsIFN1YnNjcmliZXICEGBAmILep9sJ
-uN2Pkg1gucowDQYJKoZIhvcNAQEBBQAEQAKvi2eRLO+jdoiUd8ksZt+iQ0JXoWN0
-M/W9CEv6R1c42pwUIR/1F4RMK9oeyUiv9Z6lzmPaGNmx6XOCoueszVkwgfACAQAw
-gZkwgZIxCzAJBgNVBAYTAkFVMRMwEQYDVQQIEwpRdWVlbnNsYW5kMREwDwYDVQQH
-EwhCcmlzYmFuZTEaMBgGA1UEChMRQ3J5cHRzb2Z0IFB0eSBMdGQxIjAgBgNVBAsT
-GURFTU9OU1RSQVRJT04gQU5EIFRFU1RJTkcxGzAZBgNVBAMTEkRFTU8gWkVSTyBW
-QUxVRSBDQQICBG4wDQYJKoZIhvcNAQEBBQAEQFqcHEo69ShGfcOIVjnmWXLZM+7Y
-K/50j8YuvNbqq+dQxk9YY8ZpSU/JYsxmtcnEZdlSJEkpMHAO73V+eh1QQr0wghFz
-BgkqhkiG9w0BBwEwGgYIKoZIhvcNAwIwDgICAKAECJsSmRA1jxLjgIIRSIGLVtf+
-pzeB6oXJ9GlfsnIij+DgIOvrYaXC9qywAaUg7zMnln9QMgiih5XpBLgPg5Y/KYp3
-RZeHBwkjTIFwlNYSjE0PbsszsJYUmkDTsCjFUJEdM4+Cbv3g3Kct5w1Q6pVMXJLg
-JG4uFUY8CTScVkb9ETbIy3HisCRKJWA57ERLvCr/Fa6gNJKa5Mw1A5Nsp+QQqp0U
-uQz93raAPbCdqmHu8qQ88rzbB1k/ysXedRQLlzhqFs2hryD7kHe0gX8nPdlkre8Y
-tTQhY76LtbjnV2drXcyCUMONc56KQ2VcuxB0BWjSeyN8a75/rpt6wmiM/PKw0D4g
-RmXqA1ZR62X2WKbhKqvG5tQTF1LauZeddeYS4Rb8cLt2VMB5irkKWrHmJ3qyWELY
-Lah6AzDDdcf3LEfDo6rO9djqlU8RJwS0ExAuBooVBP6bZJG1tNUUbtxBydQ4PJUH
-UhulBMXUMd545fVb8d+lZnKbx3OS2LpILJ66Yeao7jTrEOIgxUq0c6ozzqcQe4Ax
-mytwvL57LpMQm9HpLg3xBHOeDwkkNkNMldA3qrzhoS52yc6vDYrI5XA+kjp7LioG
-wdSBDyQAXLmWxBpZXjmHp7GBTBsFwouA9kYWP450PZEomxNvzf9SpslLlD+UZeHM
-GWdpi5zInESmtHFue2Zyc4Q8Ul761ENTA5N3uqUmWN2Egkv64Nyigv0CGCjoLB6n
-q1256S/ZxISiEl5MTwO/LfhhGExsu+cU12aek3Ks1kNhVXHFoqjJ3YB8Hw08VmHV
-V0Bh8jdHVABDaRcR5/k00h9VB8zMP1qQmfhE/4q/fZBrGbgWucrGbBHIYlKFq8gF
-zZrH4XWvX41le5IEefm9+hFPE6TRJPh1ezDvh2eVhQxFpK7iqpR0z2OxdLJ5fhmB
-CCRHZuRpg7p7MWB6cUhrtBZXDytdkARnlqJsLFudjVUTjU9gi+GUt1sUmEf2Bjba
-z58UC7CfPIBJGMLjQD1oAQi1GVo9K1ZIaKqUtGA2QEHB2m/aXZg8F3ZDMfHp6Tpc
-au9Em4AL42Hrau1ArCk0fnhgA4dbnmZoEVbZJDdMX5xno1tuqEKYdPLJHuZxJhz2
-xdJUNYSFgpDWLJTzvTOEdZWm+CVmLNl60kJkWNh7HdvWeBV1yBquA6+k+r26sIoq
-LaZuSq/8QWnNJYZeQpKl8Ib9d8ycQ62Q2sHxLTq+eTYlwkE4Gomi3665IfmE6DS9
-OnFfYO440lKJZJbJ9ET+VN8kkVfCGh3tJdyVTJc95LKJtxKJzaFUDMObCMPfWOz+
-PaTTY8j9qA+GvdRDxwyBw0CJqgIps1pZ+foEZsIBtNyHHNSWjZxImIuWtfYgNmZ9
-dteZkKibWyZYgb64rgMQ2+nViwGMlQaDfYWCOAIj3mQGPTLb0OgFfKNvxBZuj72B
-l8tx3oufN9Ah9DwXl+ynXen39ct901v5eakpCC9VC0xke6JBXyXjxw5qtXRbevyT
-jKbYkPFkruwrCUL2fVUxV3mBXGagjz2XNTaz3oDSu9GX/UMViGwwHryeSiwX9XOo
-/KVNv+i57w2OlY2k72EoK+700fHlcx+EZu+1tIjh8YOVXDg7+nBklcrr21/FABqP
-Apm+fBEQ7QQyQUF1aViizQLgyfRl/J9szZKY2S2z0pHJroahmgSQRPwWgk5FEFpW
-PXSG0bRJ8SFNZn2zz3cdT6WvA6hg40jrEHSnCmDTWbWshMPvhCKZqXQTbCqYQnwf
-FBCtlpJOGVVvqshqIv69DBbLztTZkjjmdKP48v2B5qHlER4T8vewDt3lU5BAGuQn
-yRCcm5qOeuwg8PxcKBgFAoLKM+65cczLna/yIRyB/gD4p53MV5RztnnLxw/YvA2h
-xgPLVYn4LFIakKGYnlC7rXhfeDuVAMTpL+NVGbLGE8DeJ2KzdUJHrGZdwV+DkUuB
-BN9Pz0NtwEX91mabWawiXrxptmWMxnofMYNe5gg34izvm33+Kj/+Jgvej7uImuo+
-LaOQcCiCUv/gwrqA/FnkiheKboF0JDFIh3UJzZ1T/Uqdjv+JcuZjvCc60AufVdm5
-0zQaj4aZ6PJHybyuU8qT0lQvm083q596yelHHgd7K3J/c8SsfRnTcnSUI8lo7/Hn
-N593dZ7kMIc+UNOdzQYSI8KBoNxqOyzuou/GTpaRe3XKADtdzXxy8jY58hwmolrV
-UU3Lfay3+bzdNLq0p/GCZ4B5NXkyivJxxiHDoOmHWAzg9pxOV8EYoyponhvF2t3i
-kc32y9OhqwUBDZXuiZgtd9W6d3EVcaY6vqOkQGxqDJuMiArC+Hk2qwkK7Mh5qDx6
-q/dVB6PdWr8sVO5J1phIV9u8m5rK7PGnmcDx4sS9eE3soa7gqkVb5H9SrOz/s/DD
-1G6BjakHtlizfJLQhhK9eTvDCUf3pvOhtNyX6OKGsPw1VB+UcC0+mnHnThrszIf9
-q/AXJnpoVUPP3Fr1eGCdLTluIc8lRwuYUH/LGdy88Vyx+joZ626a4cb63W2knQoV
-mQwz9Gwgm8RIZMLgZAXimazG8EUz/kz0z2C1Ux/wpii8yof9deLZBpMjt4R0uKhM
-VFd/Rdko+JspcfoQ9PttA/aZ7aTYu4bXHBpTpusjTOvWrf9/pC4CScqCJWsS3AlG
-BzTInw7fk96f7eVOF5g+d7lEOjPHb4/7naj3pDUlH7Htecq3faYzreT3CbqltvKt
-LBR3/aRyIM912RTHuTw+6acOq0vguiK+D62C7ZDVtiCm+BbtNNB/UJm79/OQ5mp5
-bTI0kPmDeycaWTa0Ojpum+c/dpG/iJOBDICj7jHOXSHT7JlGyX6aSFJUltucAnZv
-wzhPDmdDaIDiKSk85GqgdDWVfGosSCX9Ph/T3WpIxnwfWSDRtIHkWTjly+pe4yy5
-K6/XISy/L5Zh/fhiI5fjHjgzmlibs2ru4nVw6hBhUvlSSe2BEs5d9h/yNH8Wy3qv
-b2D3jh7hkepFtZJGNTHp8ZUC7Ns2JIpQYObsaxdI65i3mMOu7fRwI+0/4ejsWhP6
-KCEiLgwvLg0qM82ma6YB7qHAHboaczRVEffDcJUG4a5uycB0DoZFn+uEaEFyili2
-0hCn4hVfsqUQk2PT8Mo1tSl5e30xI1YJZrRgiJm9nHRX6fLizngP+ILJLPHZsPvl
-SVIfY+/v/FR8feKOjaGhyGF51BAxaM2NIQ4jMP5/X+U5gQybi0E6u7rroDhaHsKm
-CMgXqszwXWCpedA/sEbeHpiTC59YlPPSlIOMc9vPKo/mQCfWy/9icUaIfKQldvkl
-lUxxNkqu6AbIpHVscbAEzSPs5xbQXU8EZNNCDisFnnpY3nQ3eLnlm89saTJxRb7N
-WHRMlmPv7qgD7uMIq3vdOGA7i5wT9MeoNIgK1/DsgH30s6RWjJy4YyyLmRTXPzbj
-hbQVpEmiMRbEidIvUx2OjKVxVQIcgtLsa2lvHQ4XL1cpLr5GVtOgy0fMg5OCDUUD
-svjgjgLQ3P2Up2nVY5FM6/QpPc5DTLuuR9ekI2/c9Biz09RtcYDUQK2ajdo8h1Iy
-KqHFoB7h48OXxXKKY94DY0TGx6PonB/epj8orAw4QKmm5M0vXYwBOqRymCTHTqOJ
-GObdLx1euFFyqguzHJOU2gAGZI0z9Lg1yRuFyhdPZyuniIcmtLNxRZ1duYHErcAy
-X56qndmLXt7UVkATai/rIMuoJLfAsUnVuTUS5p7tJM754UZT7lTcXvDJgOUNnBRa
-IcxC3pxvbrYDJ2iFJ72xkxUP2p74gucqg25XnCVmQuLg6zDDxF6CLuw9isxyXg4p
-kneMN//7fpp8GYl9nyZm2yqYYM+jcw0fcVc64L+X4w/gL3H2UMGgxIHSJp7HIG7V
-KHtXrNyjdPXXPVUsMsAAimqOr0Lr2sZWirfuivLaPTqhbkvG5PF7K3gT80AOIcd/
-6EIHBy2hZ7ukfjHmdP4LyQOhTQklaKzGHI0mypq0uFLWJOUlZnVrMiLP1xrWkpC8
-Ro9eo6mfjjQ45z8adC43a47klwTEzvod3rNEFIGJJUEjAN3mbqie7IxoSJknBBJK
-0D9lZEQ8lZWlq7vuN8JdqPM6xh155jMVsPwjLK6Tzkj5BpRD9Tgm3u6HPeCRYQ3v
-ky71MaixdjTGbWTorqw+/wv3j0KstajivUjYsDTvZtMa9A/bxWyFQDvqOBxPWhwL
-770+iS0grXRgKrnD4V8wBDTgp4Je4B2aJjaIBPhKV5rrU8wIy1reZUbItRkIsSY/
-4jRQpHmaU7R8YRyNT2PxOZuNmrE0WqWguxTuhKLs6zQS1geR0BWsTFTI5z9kOJ7p
-8GN0tOYt0KZsT0k3COVtfKl1Nm6kaAs2EoYMiyRQAAzBlhrIjph9IgyQ0J4BhOeM
-64ZlnWawJcZex8wFHWx9QiP1R4aPAPyCr5RVUdf+h6gf+bR4nmmmqLf6dSWBz0O+
-liwL8WDQbYq5hv0H5Un5rgYzNBI9ESgW1CkH120uQFvsdr+GkZZMh2rNbR4CjmWX
-I3wU2+XYW7Yhwto2ZYU7r2AuNEpCimnR28U67ABUjp+8YOOnVaKCg1sVmXw36KJa
-bMo6OgbZktt7PVyVkKaz8k8mteEQww7FalXORDI3ffpVYeYaAxyNooIZJ4DaecRI
-ga6IJcyuQeUZ9ptgiwpwcUKja3Xe5fJk9/TNI9OS4PQSH3bCoL2m8DeC+usJR+j0
-yfduz54pYqYOWlyzyYOfTfagiD7OtCEh24ypdWfd6/N5UzcHkwE4Yy+DnX9JeDtH
-4wL/jreO5BARv0hV78hgac7/+hab2XD/fvsB/+of4Wc3TahsnDUW96xAiz17lEc1
-DKQps76+ZUlCXWd30NlascM07v/zRjPaEKbtPCzmdJE3aIWXJFpgkevvKnGRTasJ
-qTavq5rtcPC7WpTZFPf6o+NPVG7FDahOUfIaQo8xkYJFz4JJbPlp54KYdlXB1vec
-Lxil+y6MyJirKAt65DzamMq5HsMgoaad9w4t2/kX4STZbLLQP3yJKCT5qhAZguEv
-2WVTXemfbW5GwNjm4ZxeIjDUgRMWVN2AQ0S/x+61m4mx6Cunt+YVfI2g3IU3LKl4
-OszpmpHi8rEWODe0op5WmTD9bgQCSXMzGY2JrMY0MEeydhXevA+Upr4d54TZjGew
-rAYsI2BFhRdNomTjrW9LXrTPd2+H+Yt91nsxgKSY7ds0TcQtQMDDthCRK6j26PN0
-Uq170sLfiyOD1857HdOECDljnSfBibjMGYYzvISovw7pCCczq0gMVL1evINos3Nw
-aExaoy+HM7qwL8ADZZ8uDBLnXsKnTciQlBaob2rDnb4T4YC2mKgl9zMSGW/0GuGO
-2126BFKMmsbxJhVgTjMbcC6vl40GgZoAsg4c60/Dz4mi9CYhZwWhon9ZC6CUWta1
-7DnUgroXxGIcA4FVq9k65lw7u1X7l6dV+t453Stfxk7LiFiYeGYXWE6utY6f4R4T
-RJgqidc3TUEz3EywrzQKaZxj01Bo8GzCUYNVSdijIgVh+aCafLcnyAMTLlhXbWi2
-G0Ujg12zgLIT1SvCQGPA0A5M6mgkwJC030kQLfcmOkm1KTLEb+8WvJzGTSQScyU/
-W/8DY4IjiYGhriTJFdoPw19o3z9z6zDP0m58+3nTkVx49T2uV00/JxuTEtBbmYL3
-r3at6P4FVQM/mQijh90oTM2b36dNZUl+YGiU35ZlOnHTcLZ9smeiEnBezq41HgPY
-hKElUfXUHAPuJQd0QBtyzMHJ8V2N+Q+/jzCcxyGXRXEp6vp9NwAmNvxP099Yoo0R
-9va72BxiPpj/4nmLOOYquH01qOotR6H3li3T9H1+8Vt1ztP4VmBYsAcSruusIQG0
-YWom91yTb3rVbNuU6GF8og6YxvnHeawjHovLBkMEwY/WXodFEaHjFtYp0z9Cbwpj
-FK2YAAAAAA==
------END PKCS7-----
diff --git a/crypto/openssl/crypto/pkcs7/t/msie-s-a-e b/crypto/openssl/crypto/pkcs7/t/msie-s-a-e
deleted file mode 100644
index 0067794d7081..000000000000
--- a/crypto/openssl/crypto/pkcs7/t/msie-s-a-e
+++ /dev/null
@@ -1,91 +0,0 @@
-
-MIAGCSqGSIb3DQEHA6CAMIACAQAxggHCMIHMAgEAMHYwYjERMA8GA1UEBxMISW50ZXJuZXQxFzAV
-BgNVBAoTDlZlcmlTaWduLCBJbmMuMTQwMgYDVQQLEytWZXJpU2lnbiBDbGFzcyAxIENBIC0gSW5k
-aXZpZHVhbCBTdWJzY3JpYmVyAhBgQJiC3qfbCbjdj5INYLnKMA0GCSqGSIb3DQEBAQUABECjscaS
-G0U299fqiEAgTqTFQBp8Ai6zzjl557cVb3k6z4QZ7CbqBjSXAjLbh5e7S5Hd/FrFcDnxl1Ka06ha
-VHGPMIHwAgEAMIGZMIGSMQswCQYDVQQGEwJBVTETMBEGA1UECBMKUXVlZW5zbGFuZDERMA8GA1UE
-BxMIQnJpc2JhbmUxGjAYBgNVBAoTEUNyeXB0c29mdCBQdHkgTHRkMSIwIAYDVQQLExlERU1PTlNU
-UkFUSU9OIEFORCBURVNUSU5HMRswGQYDVQQDExJERU1PIFpFUk8gVkFMVUUgQ0ECAgRuMA0GCSqG
-SIb3DQEBAQUABECsyHXZ1xaiv0UQRvOmVYsaF38AL2XX75wxbCsz5/wOg7g3RP4aicZxaR4sBog0
-f2G1o9om/hu+A0rIYF/L4/GUMIAGCSqGSIb3DQEHATAaBggqhkiG9w0DAjAOAgIAoAQIsozQrnwj
-cc2ggASCBAAQz/LPoJe/+iYWeTwSebz6Q9UeKZzQ2UWm7GLtEM3s3c9SCvpmkwIRdEhLjWaBJMyI
-DiL7t1I1vMf9inB8LXgAcIEYkpNScjS8ERA9Ebb7ieNKSBg7w7B8ATHFxLSlDADqRgoZrB1Ctfgf
-ximp3EgxTgnhtyQhZxXW7kBQyFRwumplrJXOp7albP7IothrOKncw30IJT1fwPxWNMItI9juXF0U
-CbWVSjPzGBo4+XNXMvUO6MplOQEz/ywEQ9E8OZAQex1Zw9qq5ppsXB2pMsYV5sLJGikukMYKquiz
-3YK+tN6J8ahLcDUs+VGwqvZi17gpBTlbEP+ZmXJpnO63t1yTEB0V5AZcRKWUOhzlCBM5YUagqNoY
-cpsmSvOK6bYzkUKOrzWpDCAtGZ/Dvul5dTZZmxs2WpM+iyeHXMxO3huy8K1brPTqt1f1sHhuq1jD
-1eXedaCjIgUW9qV18vNAQCof/Yb6T/1fxztf/jD7pPLQJ+7LJkKCAEHGcaizpoKqhYcttaEhLq1G
-O+Ohqf7yFegMdTJ3wwP324w5ZYSU5fLo2Z34/Edf6EGvXyTIqVfAmEBALd6JGVdN5GlYYTxrL+eO
-P80Z4ao4YKoxwEmRp5bmQsQ8B29QhOFKmC6eiG5B96qLMtp7Zmu1grDNxTd6OXShWVwYARD0/B1P
-Sy0PAfk9Gb4fAkO9fZJDQYZ7s0mM5iOPEeSR7820TolOb+KfRabLA9d714jsc2jEykKlpP66Bh4j
-aCsyqJ0uUQcE8SnzrKAqGwgWiCGQpiTa+HBiP6eRlRGOKQj5Y06vcNx6Ija4cGe6+yCN8HV8tCY0
-okZK98NQCl5t79R/ZB2c3NvBJH+/g3ulU48ikT3tVmDxE3mOZofZyGFEM99P+YCMScLDxTl3hzGy
-0YkI8U855P7qOAbcFfh2T5n+LSELwLhbkymEfZT917GWTfmypBWMvJx0WHeDhKwQYPdzbKgWETnc
-yeKasaCW+oLdhBwrd6Ws2r4MA8cwiYXDLbwYmCxJA8VF++8kubF2HJOjSyMBS+QT2PSV/0D9UWoi
-Vfk7R4OvWBJVvq7nV+lXS0O5igjExxlmx1OaBfg7+Cr/MbK4zVNrKSJn82NnKKt6LC6RaTmvFYay
-0sDFxQ7Xo+Th6tDNKmKWJt6Kegfjc+qTWJTKb3kL+UI8vS0zTLy1+M/rZ4ekos/JiS5rYIcAswvg
-58kBgp/0rc6upBeWjBaK5O0aLAeBQfLulo1axWX04OSVKmYeoAltyR6UO9ME3acurQyg7Ta24yqO
-whi/PrIaEiO7dsWvFtzsshVzBLic02NlAkPkMUzliPYnZHWQglDAVxL5K2qhvK1OFCkQpIgBsBDM
-6KYRL/mkBIIEALIl927rIkaN37/BQIcxLcSa05YfC0Hl3mxWESt1A0D4lA37A9S8EbYmDfAYlMc0
-3HhZGdZEtawfpJFyDHzNZceNWBch6nxeNZCY4YFdsbzuGS0RKpwNA9S/czOJ4p9ymBCxuhGepI3U
-PKbC8C749Www1/wMdAot1n+K7M/PBGR8hWmaH5SS7U3yMwAB1fq2NDjx4ur+Um+MclSdN01MDXzG
-EO+eAo1pdAY8479234l8dB2YVAhZ1ZlJ4KmbqMKJrGJXnQUEYS6/cTDRjsUocsoW7uGg1ci2GiHa
-qjlkfpBfie3SdhFW/K8hwAH0HALs56oFN66wUkP/AaJAPfIUNhR6RpHKzZ9zCC42oB2mNawQRMnF
-ETBl1s/SwMxLKRp7jAfKs4NZxSY6I9z/2dTpzS3tsHMjxVDuxkolvRNWBILEMeL1CBvip2HhmoUw
-/Sz5NDgyzk1aQLV6DQNJ2RZLMZDRCtSwZSBu6lhhSgTJGazP0+NbqXXC5aQTrqrFIcWyDXz+ADle
-kszzYM/gSaQTCALTwfDDaU9Ek3xVgW+XBtExtJ3U+0AN3l0j86rUIdIvp6eWdxWQqv9LtpoorKMD
-KfUc5PYV09Z1JgsT4X51Zzq+74l5dz7udIM7UNbdTpmRm9PDj3TUbGCvNR9hqOEGTLbkvb1ZR24a
-h6uGRl2znB25IpDAGRhNRb9is/pO2tvHwHTDMOjrgvZG/pNvXgSUxz0pRjUjXIcqBe2X2gcQfeal
-r8gY76o83WEGL6ODryV9vTQVHt52+izgpYoBZaVlpgqbZl54c+OE0Zxf9RwXwDbcYu5Ku5E0MPL0
-qUjc0y2+Y6E4P5bAWaZGMGT+ORkyVUzcaWmM/+XlO7PER5wrWlCIMZCX1L/nvioY0q0CKqALn7DJ
-QU+qenbwrb6uwS7uNZY6V86s0aDYpU7yRyqxC5SbuyNJb02gdxUCgpIscFaMUjMVRml4M4BIjX/b
-U+HgHoVMUm8SnN9gRcT2izPrgOGVcMTJjfenzoCKoCPo9RjgGMctgB4DvKamErNU7OrilIfuoqzE
-PNSeP9SPw/zkDmNvMebM499We9CVnsHUWqF00/ZJWoua77+0f1bLS/tmci1JBvIcMo/4SJvgH+KF
-o0gijP9gqAPd5iCOnpnJlHUqRIym42SmyKEDuzdSwXKjAR6j7uXda39JyMJr8gGzEsu0jYRkAmj1
-YdiqwKXUcLMkcj1AKeU/PxTUVw0YKsv/rowrPYww3xQUWqNivrXB7GCHE3BzsYNdHsmziaGIXQbA
-+EBHdkuKrM8BcC+fxhF/l/KUxngsD1E75IcUv8zFDF+sk4CBYHqks9S4JYlcubuizqsILbdGzIMN
-Z7w34k0XT+sEggQAyzr8MHeIJGsT+AYnZr08PeTbyr01JEoT7lPYT6PzX4F63QKKDl+mB+PwLMzY
-CXrxZcUmuay6/MV8w/f5T6vQXdoSw5puWodBYwVReYh1IaEN+jiTapm9YBVmcIsJPO6abHowknSV
-OWSvST0AtAX57fFOTckm+facfBK9s9T1lUUgF44Bh5e8f9qKqfOV44nqdCOEyUm0Dao497ieN4Eg
-XBLNvOZY9+irMiXjp0lcyFvhrJOczfyCr9EiiaiH1TfSzKGKsf2W84iKn/JH6x2eOo7xjwJ40BQD
-c6S1cUNEuqBhP6by0FioOXYOKVyifpxk84Eb+F/4CNdTJTvCPwsiegdfsX/Q53DvKVtXp9Ycam5J
-TmKRHXK/bMHF4ONv3p/O/kn/BqRx+fbbP2eMX8Z1F/ltHKfp6B+06HljUwQLBJs9XtCfqH5Zgdz9
-gad5WZF5ykFArmHDgeFlgggvbZ7z9vqnjN/TH68TxJzauYQ5vLHQ6wGXik4/4uq7/TqNmhxlQEM4
-zVkwsn203bUmKLyz+yl1zItDpn5zy1uXfGo99rBdUzdbdE9LmEFPMaFsaHd4a8oDaUroD7FgCbeD
-JJVld3ac6F8+3QbExPs48OrgA1kI3/UwXr52ldjiYzTLfAGR9BjqNFTw45FUHuMf8TEM5hcHx56w
-95eKAqraDk28o9k+M2UKpcmrdlWoWzdqVVFeWGpM8x9Y9Nt0lf/4VUQgrXjqTkUCQkJyqTeTeGgH
-rn3QBk2XAgpxZhaJs3InW0BkAlBmK99cMinUiJeFt5a4p5wPeXrVuh6V9m7Mpl9hzpogg++EZqah
-fzzNnDgxOZfW342DX052PdgXo0NnkhCk005LvFt6M2mRn0fLgNVfyUZZoOp8cO5ZWbhXXlrhrgUt
-j2zKPK6Q94Zj4kdXHBGpAkrB8ZQ4EGGODE0Dqusm8WPXzB+9236IMHPU7lFbyjBrFNI7O4jg+qRI
-Ipi+7tX0FsilqEbmjG+OPwhZXrdqUqyF+rjKQuSRq7lOeDB4c6S2dq4OOny01i5HCbbyc9UvSHRm
-hOhGqUlzHyHLo3W7j+26V/MhkDXJ+Tx+qfylv4pbliwTteJJj+CZwzjv29qb6lxYi+38Bw10ERap
-m8UCRFBecVN7xXlcIfyeAl666Vi7EBJZv3EdFNrx1nlLwM65nYya7uj6L7IwJWotIUx8E0XH0/cU
-xS/dG8bxf9L/8652h5gq3LI+wTNGuEX0DMuz7BGQG+NtgabrZ6SsKGthGa7eULTpz0McWTLRU0y/
-/tkckpm5pDnXSFbIMskwwjECz82UZBSPpigdN/Pjg5d+0yWu7s3VJxw4ENWPPpzZ+j7sOXmdvn9P
-O1tQd60EO+3awASCBAAZQvWV3/yJ6FxPttbP+qeURpJoPEZfpN2UYZmd8HqtR0YbaOZ6Rln9nvpd
-K9fylXdw9z2xeCbjDWUttJB4VqZxGJM8eCTC1VDVyAOsQ5n7SY55dMkQbU+o4Z/4J5m8+wz50BBI
-LfruL1eZ6/CF6CdvxVRiJ10sXc0Tn2sVMXqkw7Adp1GYoCI9c6VFSFK74+n+y7LVFQ5HBnbQyKJc
-dvdLOXwZOPaFHC5UNXRmOpcwdPqyXUe+xIsOMYbzdlAnI9eGDNeRDktUa/Rh0CbZCxjmJzoZEYOE
-ZjsYZlEfp1Kb61t8z4m28hGLEg88T1Ihmxa2HeUWes1RpmgIOP+/2Lb3smj/l/fpSu4gabFgyCAV
-H5HdCYMScUv8SVu55+tpeO8ELoHHQUXV4rr084O4budzhgNSOPyLGDl5sfDUXiyusPCxS4JVO/KY
-6V2Qrtg/q2wtmXpEkZnGT+Qi3WDzwt4W81alztnYMP17oGLmxX71KV9OEiMZjI4WaaGt+OOINLtR
-qefioZ1NI2L1s5M0tybwTsyU9WERM+3pUwXIfJVsbMZRlNaO2OogcHbaR4UWvhOj+3CTG1sThiYQ
-MxMnp1Rpqx3nhyzqLO3TRrkYvxnA3cdPBn9EeqpgBMg7X3hCiMV3Fl5cj/WOMhtHYgY7BgeCXo46
-EFVZ4+WroGZ46xGiRDiIblo8bzLd7QCxvukzxy3mUDgsZQ8pds4N28weSUhBk5MAPbfBpRvXUVJx
-MhKqXucQU1Md1qSGLbuuIQuz9pAGp1JFUx/vEkCgm74daSoVWCZuB+1ZE4f48clvrBj51xMNf8CP
-EFE7vySzVb6X2H1i5X3Z+Y3DdIcWw4Y2FClfcJk4Mwq8Cq2GALGFEge9YSEE9YmyuU6OFeU0ICon
-iXAgZ72SM8fBwJPruLFbdsNYKW+oAfmPisXSWMcZmdSbfk0GYv+vKtu3eegSbWw1UsCVtZOh9E5Z
-uQ83l59CBqO9sV/SFU3WrrJ0qNWxrmXu9nJn5Qf5iCRoFGYNHYHkIG5FS6N00GEDZxGkxmro2d++
-Adj5LVHc/b1cYWmrux+jEqI8ZK8cyTB0XMbBA/HYbx9NXazr7znP4/Mlv3pZToEcYt+lgLHAArtU
-AdhybhbLIwNMq0gr6EwtDklBa3ns4Wx/rJU8H7LGs6gV8uqeaSketv+nz+sQhfctxZ1rx+5qzXfy
-FOQVpO23KDQunBi1Bl9k61Di4q9JWcyADBXPHXJzp7mL8Fk7zdvMAEfuED1phdRm6GgDYoYUs4yQ
-IrhSjFlWyk7hT8475xk3BIv++obvWSAv/3+pF6A6U2RXDChVmnG0JnPa9wYYtdzBmLfZKBjX+DjD
-yEMsuhPsCzuN4R6tBIIBWCVRKmKwdkatmpsQBgDw48u0/Arffl5/DRlS9ee+QffFecUitDdCK+kt
-X5L2fGYrL5g6SltncMIeV1ptx4nuSjC/O944q1KYtqvQiPFWJqEXIRMNbbYOC47sjLza0tEFrimN
-wxcrWGSzsy5R9beFQ1aHPcMrDWfCoviNRk2qPtxuKIC5Qk2ZuOmJLjCiLwUGEb0/1Mpzv3MqQa7d
-mRayXg3DZWJPajxNZv6eS357ElMvwGQmqafb2mlQJwWLsg9m9PG7uqEoyrqSc6MiuY+icLEFib9j
-OfRQrx70rTSKUfTr4MtP0aZZAefjCrpVIyTekhFDOk0Nmx057eonlyGgmGpl5/Uo+t1J1Z11Ya/l
-bNbfmebRISJeTVW0I8FhseAZMI1GSwp/ludJxSLYOgyRkh+GX134MexNo7O9F1SxLCfWaSG9Fc3s
-5ify04ua9/t8SGrYZPm/l3MkAAAAAAAAAAAAAA==
-
-
diff --git a/crypto/openssl/crypto/pkcs7/t/msie-s-a-e.pem b/crypto/openssl/crypto/pkcs7/t/msie-s-a-e.pem
deleted file mode 100644
index 55dbd8f80bdd..000000000000
--- a/crypto/openssl/crypto/pkcs7/t/msie-s-a-e.pem
+++ /dev/null
@@ -1,106 +0,0 @@
------BEGIN PKCS7-----
-MIAGCSqGSIb3DQEHA6CAMIITUAIBADGCAcIwgcwCAQAwdjBiMREwDwYDVQQHEwhJ
-bnRlcm5ldDEXMBUGA1UEChMOVmVyaVNpZ24sIEluYy4xNDAyBgNVBAsTK1ZlcmlT
-aWduIENsYXNzIDEgQ0EgLSBJbmRpdmlkdWFsIFN1YnNjcmliZXICEGBAmILep9sJ
-uN2Pkg1gucowDQYJKoZIhvcNAQEBBQAEQKOxxpIbRTb31+qIQCBOpMVAGnwCLrPO
-OXnntxVveTrPhBnsJuoGNJcCMtuHl7tLkd38WsVwOfGXUprTqFpUcY8wgfACAQAw
-gZkwgZIxCzAJBgNVBAYTAkFVMRMwEQYDVQQIEwpRdWVlbnNsYW5kMREwDwYDVQQH
-EwhCcmlzYmFuZTEaMBgGA1UEChMRQ3J5cHRzb2Z0IFB0eSBMdGQxIjAgBgNVBAsT
-GURFTU9OU1RSQVRJT04gQU5EIFRFU1RJTkcxGzAZBgNVBAMTEkRFTU8gWkVSTyBW
-QUxVRSBDQQICBG4wDQYJKoZIhvcNAQEBBQAEQKzIddnXFqK/RRBG86ZVixoXfwAv
-ZdfvnDFsKzPn/A6DuDdE/hqJxnFpHiwGiDR/YbWj2ib+G74DSshgX8vj8ZQwghGD
-BgkqhkiG9w0BBwEwGgYIKoZIhvcNAwIwDgICAKAECLKM0K58I3HNgIIRWBDP8s+g
-l7/6JhZ5PBJ5vPpD1R4pnNDZRabsYu0Qzezdz1IK+maTAhF0SEuNZoEkzIgOIvu3
-UjW8x/2KcHwteABwgRiSk1JyNLwRED0RtvuJ40pIGDvDsHwBMcXEtKUMAOpGChms
-HUK1+B/GKancSDFOCeG3JCFnFdbuQFDIVHC6amWslc6ntqVs/sii2Gs4qdzDfQgl
-PV/A/FY0wi0j2O5cXRQJtZVKM/MYGjj5c1cy9Q7oymU5ATP/LARD0Tw5kBB7HVnD
-2qrmmmxcHakyxhXmwskaKS6Qxgqq6LPdgr603onxqEtwNSz5UbCq9mLXuCkFOVsQ
-/5mZcmmc7re3XJMQHRXkBlxEpZQ6HOUIEzlhRqCo2hhymyZK84rptjORQo6vNakM
-IC0Zn8O+6Xl1NlmbGzZakz6LJ4dczE7eG7LwrVus9Oq3V/WweG6rWMPV5d51oKMi
-BRb2pXXy80BAKh/9hvpP/V/HO1/+MPuk8tAn7ssmQoIAQcZxqLOmgqqFhy21oSEu
-rUY746Gp/vIV6Ax1MnfDA/fbjDllhJTl8ujZnfj8R1/oQa9fJMipV8CYQEAt3okZ
-V03kaVhhPGsv544/zRnhqjhgqjHASZGnluZCxDwHb1CE4UqYLp6IbkH3qosy2ntm
-a7WCsM3FN3o5dKFZXBgBEPT8HU9LLQ8B+T0Zvh8CQ719kkNBhnuzSYzmI48R5JHv
-zbROiU5v4p9FpssD13vXiOxzaMTKQqWk/roGHiNoKzKonS5RBwTxKfOsoCobCBaI
-IZCmJNr4cGI/p5GVEY4pCPljTq9w3HoiNrhwZ7r7II3wdXy0JjSiRkr3w1AKXm3v
-1H9kHZzc28Ekf7+De6VTjyKRPe1WYPETeY5mh9nIYUQz30/5gIxJwsPFOXeHMbLR
-iQjxTznk/uo4BtwV+HZPmf4tIQvAuFuTKYR9lP3XsZZN+bKkFYy8nHRYd4OErBBg
-93NsqBYROdzJ4pqxoJb6gt2EHCt3pazavgwDxzCJhcMtvBiYLEkDxUX77yS5sXYc
-k6NLIwFL5BPY9JX/QP1RaiJV+TtHg69YElW+rudX6VdLQ7mKCMTHGWbHU5oF+Dv4
-Kv8xsrjNU2spImfzY2coq3osLpFpOa8VhrLSwMXFDtej5OHq0M0qYpYm3op6B+Nz
-6pNYlMpveQv5Qjy9LTNMvLX4z+tnh6Siz8mJLmtghwCzC+DnyQGCn/Stzq6kF5aM
-Fork7RosB4FB8u6WjVrFZfTg5JUqZh6gCW3JHpQ70wTdpy6tDKDtNrbjKo7CGL8+
-shoSI7t2xa8W3OyyFXMEuJzTY2UCQ+QxTOWI9idkdZCCUMBXEvkraqG8rU4UKRCk
-iAGwEMzophEv+aSyJfdu6yJGjd+/wUCHMS3EmtOWHwtB5d5sVhErdQNA+JQN+wPU
-vBG2Jg3wGJTHNNx4WRnWRLWsH6SRcgx8zWXHjVgXIep8XjWQmOGBXbG87hktESqc
-DQPUv3MzieKfcpgQsboRnqSN1DymwvAu+PVsMNf8DHQKLdZ/iuzPzwRkfIVpmh+U
-ku1N8jMAAdX6tjQ48eLq/lJvjHJUnTdNTA18xhDvngKNaXQGPOO/dt+JfHQdmFQI
-WdWZSeCpm6jCiaxiV50FBGEuv3Ew0Y7FKHLKFu7hoNXIthoh2qo5ZH6QX4nt0nYR
-VvyvIcAB9BwC7OeqBTeusFJD/wGiQD3yFDYUekaRys2fcwguNqAdpjWsEETJxREw
-ZdbP0sDMSykae4wHyrODWcUmOiPc/9nU6c0t7bBzI8VQ7sZKJb0TVgSCxDHi9Qgb
-4qdh4ZqFMP0s+TQ4Ms5NWkC1eg0DSdkWSzGQ0QrUsGUgbupYYUoEyRmsz9PjW6l1
-wuWkE66qxSHFsg18/gA5XpLM82DP4EmkEwgC08Hww2lPRJN8VYFvlwbRMbSd1PtA
-Dd5dI/Oq1CHSL6enlncVkKr/S7aaKKyjAyn1HOT2FdPWdSYLE+F+dWc6vu+JeXc+
-7nSDO1DW3U6ZkZvTw4901GxgrzUfYajhBky25L29WUduGoerhkZds5wduSKQwBkY
-TUW/YrP6Ttrbx8B0wzDo64L2Rv6Tb14ElMc9KUY1I1yHKgXtl9oHEH3mpa/IGO+q
-PN1hBi+jg68lfb00FR7edvos4KWKAWWlZaYKm2ZeeHPjhNGcX/UcF8A23GLuSruR
-NDDy9KlI3NMtvmOhOD+WwFmmRjBk/jkZMlVM3GlpjP/l5TuzxEecK1pQiDGQl9S/
-574qGNKtAiqgC5+wyUFPqnp28K2+rsEu7jWWOlfOrNGg2KVO8kcqsQuUm7sjSW9N
-oHcVAoKSLHBWjFIzFUZpeDOASI1/21Ph4B6FTFJvEpzfYEXE9osz64DhlXDEyY33
-p86AiqAj6PUY4BjHLYAeA7ymphKzVOzq4pSH7qKsxDzUnj/Uj8P85A5jbzHmzOPf
-VnvQlZ7B1FqhdNP2SVqLmu+/tH9Wy0v7ZnItSQbyHDKP+Eib4B/ihaNIIoz/YKgD
-3eYgjp6ZyZR1KkSMpuNkpsihA7s3UsFyowEeo+7l3Wt/ScjCa/IBsxLLtI2EZAJo
-9WHYqsCl1HCzJHI9QCnlPz8U1FcNGCrL/66MKz2MMN8UFFqjYr61wexghxNwc7GD
-XR7Js4mhiF0GwPhAR3ZLiqzPAXAvn8YRf5fylMZ4LA9RO+SHFL/MxQxfrJOAgWB6
-pLPUuCWJXLm7os6rCC23RsyDDWe8N+JNF0/ryzr8MHeIJGsT+AYnZr08PeTbyr01
-JEoT7lPYT6PzX4F63QKKDl+mB+PwLMzYCXrxZcUmuay6/MV8w/f5T6vQXdoSw5pu
-WodBYwVReYh1IaEN+jiTapm9YBVmcIsJPO6abHowknSVOWSvST0AtAX57fFOTckm
-+facfBK9s9T1lUUgF44Bh5e8f9qKqfOV44nqdCOEyUm0Dao497ieN4EgXBLNvOZY
-9+irMiXjp0lcyFvhrJOczfyCr9EiiaiH1TfSzKGKsf2W84iKn/JH6x2eOo7xjwJ4
-0BQDc6S1cUNEuqBhP6by0FioOXYOKVyifpxk84Eb+F/4CNdTJTvCPwsiegdfsX/Q
-53DvKVtXp9Ycam5JTmKRHXK/bMHF4ONv3p/O/kn/BqRx+fbbP2eMX8Z1F/ltHKfp
-6B+06HljUwQLBJs9XtCfqH5Zgdz9gad5WZF5ykFArmHDgeFlgggvbZ7z9vqnjN/T
-H68TxJzauYQ5vLHQ6wGXik4/4uq7/TqNmhxlQEM4zVkwsn203bUmKLyz+yl1zItD
-pn5zy1uXfGo99rBdUzdbdE9LmEFPMaFsaHd4a8oDaUroD7FgCbeDJJVld3ac6F8+
-3QbExPs48OrgA1kI3/UwXr52ldjiYzTLfAGR9BjqNFTw45FUHuMf8TEM5hcHx56w
-95eKAqraDk28o9k+M2UKpcmrdlWoWzdqVVFeWGpM8x9Y9Nt0lf/4VUQgrXjqTkUC
-QkJyqTeTeGgHrn3QBk2XAgpxZhaJs3InW0BkAlBmK99cMinUiJeFt5a4p5wPeXrV
-uh6V9m7Mpl9hzpogg++EZqahfzzNnDgxOZfW342DX052PdgXo0NnkhCk005LvFt6
-M2mRn0fLgNVfyUZZoOp8cO5ZWbhXXlrhrgUtj2zKPK6Q94Zj4kdXHBGpAkrB8ZQ4
-EGGODE0Dqusm8WPXzB+9236IMHPU7lFbyjBrFNI7O4jg+qRIIpi+7tX0FsilqEbm
-jG+OPwhZXrdqUqyF+rjKQuSRq7lOeDB4c6S2dq4OOny01i5HCbbyc9UvSHRmhOhG
-qUlzHyHLo3W7j+26V/MhkDXJ+Tx+qfylv4pbliwTteJJj+CZwzjv29qb6lxYi+38
-Bw10ERapm8UCRFBecVN7xXlcIfyeAl666Vi7EBJZv3EdFNrx1nlLwM65nYya7uj6
-L7IwJWotIUx8E0XH0/cUxS/dG8bxf9L/8652h5gq3LI+wTNGuEX0DMuz7BGQG+Nt
-gabrZ6SsKGthGa7eULTpz0McWTLRU0y//tkckpm5pDnXSFbIMskwwjECz82UZBSP
-pigdN/Pjg5d+0yWu7s3VJxw4ENWPPpzZ+j7sOXmdvn9PO1tQd60EO+3awBlC9ZXf
-/InoXE+21s/6p5RGkmg8Rl+k3ZRhmZ3weq1HRhto5npGWf2e+l0r1/KVd3D3PbF4
-JuMNZS20kHhWpnEYkzx4JMLVUNXIA6xDmftJjnl0yRBtT6jhn/gnmbz7DPnQEEgt
-+u4vV5nr8IXoJ2/FVGInXSxdzROfaxUxeqTDsB2nUZigIj1zpUVIUrvj6f7LstUV
-DkcGdtDIolx290s5fBk49oUcLlQ1dGY6lzB0+rJdR77Eiw4xhvN2UCcj14YM15EO
-S1Rr9GHQJtkLGOYnOhkRg4RmOxhmUR+nUpvrW3zPibbyEYsSDzxPUiGbFrYd5RZ6
-zVGmaAg4/7/YtveyaP+X9+lK7iBpsWDIIBUfkd0JgxJxS/xJW7nn62l47wQugcdB
-RdXiuvTzg7hu53OGA1I4/IsYOXmx8NReLK6w8LFLglU78pjpXZCu2D+rbC2ZekSR
-mcZP5CLdYPPC3hbzVqXO2dgw/XugYubFfvUpX04SIxmMjhZpoa3444g0u1Gp5+Kh
-nU0jYvWzkzS3JvBOzJT1YREz7elTBch8lWxsxlGU1o7Y6iBwdtpHhRa+E6P7cJMb
-WxOGJhAzEyenVGmrHeeHLOos7dNGuRi/GcDdx08Gf0R6qmAEyDtfeEKIxXcWXlyP
-9Y4yG0diBjsGB4JejjoQVVnj5augZnjrEaJEOIhuWjxvMt3tALG+6TPHLeZQOCxl
-Dyl2zg3bzB5JSEGTkwA9t8GlG9dRUnEyEqpe5xBTUx3WpIYtu64hC7P2kAanUkVT
-H+8SQKCbvh1pKhVYJm4H7VkTh/jxyW+sGPnXEw1/wI8QUTu/JLNVvpfYfWLlfdn5
-jcN0hxbDhjYUKV9wmTgzCrwKrYYAsYUSB71hIQT1ibK5To4V5TQgKieJcCBnvZIz
-x8HAk+u4sVt2w1gpb6gB+Y+KxdJYxxmZ1Jt+TQZi/68q27d56BJtbDVSwJW1k6H0
-Tlm5DzeXn0IGo72xX9IVTdausnSo1bGuZe72cmflB/mIJGgUZg0dgeQgbkVLo3TQ
-YQNnEaTGaujZ374B2PktUdz9vVxhaau7H6MSojxkrxzJMHRcxsED8dhvH01drOvv
-Oc/j8yW/ellOgRxi36WAscACu1QB2HJuFssjA0yrSCvoTC0OSUFreezhbH+slTwf
-ssazqBXy6p5pKR62/6fP6xCF9y3FnWvH7mrNd/IU5BWk7bcoNC6cGLUGX2TrUOLi
-r0lZzIAMFc8dcnOnuYvwWTvN28wAR+4QPWmF1GboaANihhSzjJAiuFKMWVbKTuFP
-zjvnGTcEi/76hu9ZIC//f6kXoDpTZFcMKFWacbQmc9r3Bhi13MGYt9koGNf4OMPI
-Qyy6E+wLO43hHq0lUSpisHZGrZqbEAYA8OPLtPwK335efw0ZUvXnvkH3xXnFIrQ3
-QivpLV+S9nxmKy+YOkpbZ3DCHldabceJ7kowvzveOKtSmLar0IjxViahFyETDW22
-DguO7Iy82tLRBa4pjcMXK1hks7MuUfW3hUNWhz3DKw1nwqL4jUZNqj7cbiiAuUJN
-mbjpiS4woi8FBhG9P9TKc79zKkGu3ZkWsl4Nw2ViT2o8TWb+nkt+exJTL8BkJqmn
-29ppUCcFi7IPZvTxu7qhKMq6knOjIrmPonCxBYm/Yzn0UK8e9K00ilH06+DLT9Gm
-WQHn4wq6VSMk3pIRQzpNDZsdOe3qJ5choJhqZef1KPrdSdWddWGv5WzW35nm0SEi
-Xk1VtCPBYbHgGTCNRksKf5bnScUi2DoMkZIfhl9d+DHsTaOzvRdUsSwn1mkhvRXN
-7OYn8tOLmvf7fEhq2GT5v5dzJAAAAAA=
------END PKCS7-----
diff --git a/crypto/openssl/crypto/pkcs7/t/nav-smime b/crypto/openssl/crypto/pkcs7/t/nav-smime
deleted file mode 100644
index 6ee4b597a145..000000000000
--- a/crypto/openssl/crypto/pkcs7/t/nav-smime
+++ /dev/null
@@ -1,157 +0,0 @@
-From angela@c2.net.au Thu May 14 13:32:27 1998
-X-UIDL: 83c94dd550e54329bf9571b72038b8c8
-Return-Path: angela@c2.net.au
-Received: from cryptsoft.com (play.cryptsoft.com [203.56.44.3]) by pandora.cryptsoft.com (8.8.3/8.7.3) with ESMTP id NAA27838 for <tjh@cryptsoft.com>; Thu, 14 May 1998 13:32:26 +1000 (EST)
-Message-ID: <355A6779.4B63E64C@cryptsoft.com>
-Date: Thu, 14 May 1998 13:39:37 +1000
-From: Angela van Lent <angela@c2.net.au>
-X-Mailer: Mozilla 4.03 [en] (Win95; U)
-MIME-Version: 1.0
-To: tjh@cryptsoft.com
-Subject: signed
-Content-Type: multipart/signed; protocol="application/x-pkcs7-signature"; micalg=sha1; boundary="------------ms9A58844C95949ECC78A1C54C"
-Content-Length: 2604
-Status: OR
-
-This is a cryptographically signed message in MIME format.
-
---------------ms9A58844C95949ECC78A1C54C
-Content-Type: text/plain; charset=us-ascii
-Content-Transfer-Encoding: 7bit
-
-signed body
-
---------------ms9A58844C95949ECC78A1C54C
-Content-Type: application/x-pkcs7-signature; name="smime.p7s"
-Content-Transfer-Encoding: base64
-Content-Disposition: attachment; filename="smime.p7s"
-Content-Description: S/MIME Cryptographic Signature
-
-MIIGHgYJKoZIhvcNAQcCoIIGDzCCBgsCAQExCzAJBgUrDgMCGgUAMAsGCSqGSIb3DQEHAaCC
-BGswggJTMIIB/aADAgECAgIEfjANBgkqhkiG9w0BAQQFADCBkjELMAkGA1UEBhMCQVUxEzAR
-BgNVBAgTClF1ZWVuc2xhbmQxETAPBgNVBAcTCEJyaXNiYW5lMRowGAYDVQQKExFDcnlwdHNv
-ZnQgUHR5IEx0ZDEiMCAGA1UECxMZREVNT05TVFJBVElPTiBBTkQgVEVTVElORzEbMBkGA1UE
-AxMSREVNTyBaRVJPIFZBTFVFIENBMB4XDTk4MDUxMzA2MjY1NloXDTAwMDUxMjA2MjY1Nlow
-gaUxCzAJBgNVBAYTAkFVMRMwEQYDVQQIEwpRdWVlbnNsYW5kMREwDwYDVQQHEwhCcmlzYmFu
-ZTEaMBgGA1UEChMRQ3J5cHRzb2Z0IFB0eSBMdGQxEjAQBgNVBAsTCVNNSU1FIDAwMzEZMBcG
-A1UEAxMQQW5nZWxhIHZhbiBMZWVudDEjMCEGCSqGSIb3DQEJARYUYW5nZWxhQGNyeXB0c29m
-dC5jb20wXDANBgkqhkiG9w0BAQEFAANLADBIAkEAuC3+7dAb2LhuO7gt2cTM8vsNjhG5JfDh
-hX1Vl/wVGbKEEj0MA6vWEolvefQlxB+EzwCtR0YZ7eEC/T/4JoCyeQIDAQABoygwJjAkBglg
-hkgBhvhCAQ0EFxYVR2VuZXJhdGVkIHdpdGggU1NMZWF5MA0GCSqGSIb3DQEBBAUAA0EAUnSP
-igs6TMFISTjw8cBtJYb98czgAVkVFjKyJQwYMH8FbDnCyx6NocM555nsyDstaw8fKR11Khds
-syd3ikkrhDCCAhAwggG6AgEDMA0GCSqGSIb3DQEBBAUAMIGSMQswCQYDVQQGEwJBVTETMBEG
-A1UECBMKUXVlZW5zbGFuZDERMA8GA1UEBxMIQnJpc2JhbmUxGjAYBgNVBAoTEUNyeXB0c29m
-dCBQdHkgTHRkMSIwIAYDVQQLExlERU1PTlNUUkFUSU9OIEFORCBURVNUSU5HMRswGQYDVQQD
-ExJERU1PIFpFUk8gVkFMVUUgQ0EwHhcNOTgwMzAzMDc0MTMyWhcNMDgwMjI5MDc0MTMyWjCB
-kjELMAkGA1UEBhMCQVUxEzARBgNVBAgTClF1ZWVuc2xhbmQxETAPBgNVBAcTCEJyaXNiYW5l
-MRowGAYDVQQKExFDcnlwdHNvZnQgUHR5IEx0ZDEiMCAGA1UECxMZREVNT05TVFJBVElPTiBB
-TkQgVEVTVElORzEbMBkGA1UEAxMSREVNTyBaRVJPIFZBTFVFIENBMFwwDQYJKoZIhvcNAQEB
-BQADSwAwSAJBAL+0E2fLej3FSCwe2A2iRnMuC3z12qHIp6Ky1wo2zZcxft7AI+RfkrWrSGtf
-mfzBEuPrLdfulncC5Y1pNcM8RTUCAwEAATANBgkqhkiG9w0BAQQFAANBAGSbLMphL6F5pp3s
-8o0Xyh86FHFdpVOwYx09ELLkuG17V/P9pgIc0Eo/gDMbN+KT3IdgECf8S//pCRA6RrNjcXIx
-ggF7MIIBdwIBATCBmTCBkjELMAkGA1UEBhMCQVUxEzARBgNVBAgTClF1ZWVuc2xhbmQxETAP
-BgNVBAcTCEJyaXNiYW5lMRowGAYDVQQKExFDcnlwdHNvZnQgUHR5IEx0ZDEiMCAGA1UECxMZ
-REVNT05TVFJBVElPTiBBTkQgVEVTVElORzEbMBkGA1UEAxMSREVNTyBaRVJPIFZBTFVFIENB
-AgIEfjAJBgUrDgMCGgUAoHowGAYJKoZIhvcNAQkDMQsGCSqGSIb3DQEHATAbBgkqhkiG9w0B
-CQ8xDjAMMAoGCCqGSIb3DQMHMBwGCSqGSIb3DQEJBTEPFw05ODA1MTQwMzM5MzdaMCMGCSqG
-SIb3DQEJBDEWBBQstNMnSV26ba8PapQEDhO21yNFrjANBgkqhkiG9w0BAQEFAARAW9Xb9YXv
-BfcNkutgFX9Gr8iXhBVsNtGEVrjrpkQwpKa7jHI8SjAlLhk/4RFwDHf+ISB9Np3Z1WDWnLcA
-9CWR6g==
---------------ms9A58844C95949ECC78A1C54C--
-
-
-From angela@c2.net.au Thu May 14 13:33:16 1998
-X-UIDL: 8f076c44ff7c5967fd5b00c4588a8731
-Return-Path: angela@c2.net.au
-Received: from cryptsoft.com (play.cryptsoft.com [203.56.44.3]) by pandora.cryptsoft.com (8.8.3/8.7.3) with ESMTP id NAA27847 for <tjh@cryptsoft.com>; Thu, 14 May 1998 13:33:15 +1000 (EST)
-Message-ID: <355A67AB.2AF38806@cryptsoft.com>
-Date: Thu, 14 May 1998 13:40:27 +1000
-From: Angela van Lent <angela@c2.net.au>
-X-Mailer: Mozilla 4.03 [en] (Win95; U)
-MIME-Version: 1.0
-To: tjh@cryptsoft.com
-Subject: signed
-Content-Type: multipart/signed; protocol="application/x-pkcs7-signature"; micalg=sha1; boundary="------------msD7863B84BD61E02C407F2F5E"
-Content-Length: 2679
-Status: OR
-
-This is a cryptographically signed message in MIME format.
-
---------------msD7863B84BD61E02C407F2F5E
-Content-Type: text/plain; charset=us-ascii
-Content-Transfer-Encoding: 7bit
-
-signed body 2
-
---------------msD7863B84BD61E02C407F2F5E
-Content-Type: application/x-pkcs7-signature; name="smime.p7s"
-Content-Transfer-Encoding: base64
-Content-Disposition: attachment; filename="smime.p7s"
-Content-Description: S/MIME Cryptographic Signature
-
-MIIGVgYJKoZIhvcNAQcCoIIGRzCCBkMCAQExCzAJBgUrDgMCGgUAMAsGCSqGSIb3DQEHAaCC
-BGswggJTMIIB/aADAgECAgIEfjANBgkqhkiG9w0BAQQFADCBkjELMAkGA1UEBhMCQVUxEzAR
-BgNVBAgTClF1ZWVuc2xhbmQxETAPBgNVBAcTCEJyaXNiYW5lMRowGAYDVQQKExFDcnlwdHNv
-ZnQgUHR5IEx0ZDEiMCAGA1UECxMZREVNT05TVFJBVElPTiBBTkQgVEVTVElORzEbMBkGA1UE
-AxMSREVNTyBaRVJPIFZBTFVFIENBMB4XDTk4MDUxMzA2MjY1NloXDTAwMDUxMjA2MjY1Nlow
-gaUxCzAJBgNVBAYTAkFVMRMwEQYDVQQIEwpRdWVlbnNsYW5kMREwDwYDVQQHEwhCcmlzYmFu
-ZTEaMBgGA1UEChMRQ3J5cHRzb2Z0IFB0eSBMdGQxEjAQBgNVBAsTCVNNSU1FIDAwMzEZMBcG
-A1UEAxMQQW5nZWxhIHZhbiBMZWVudDEjMCEGCSqGSIb3DQEJARYUYW5nZWxhQGNyeXB0c29m
-dC5jb20wXDANBgkqhkiG9w0BAQEFAANLADBIAkEAuC3+7dAb2LhuO7gt2cTM8vsNjhG5JfDh
-hX1Vl/wVGbKEEj0MA6vWEolvefQlxB+EzwCtR0YZ7eEC/T/4JoCyeQIDAQABoygwJjAkBglg
-hkgBhvhCAQ0EFxYVR2VuZXJhdGVkIHdpdGggU1NMZWF5MA0GCSqGSIb3DQEBBAUAA0EAUnSP
-igs6TMFISTjw8cBtJYb98czgAVkVFjKyJQwYMH8FbDnCyx6NocM555nsyDstaw8fKR11Khds
-syd3ikkrhDCCAhAwggG6AgEDMA0GCSqGSIb3DQEBBAUAMIGSMQswCQYDVQQGEwJBVTETMBEG
-A1UECBMKUXVlZW5zbGFuZDERMA8GA1UEBxMIQnJpc2JhbmUxGjAYBgNVBAoTEUNyeXB0c29m
-dCBQdHkgTHRkMSIwIAYDVQQLExlERU1PTlNUUkFUSU9OIEFORCBURVNUSU5HMRswGQYDVQQD
-ExJERU1PIFpFUk8gVkFMVUUgQ0EwHhcNOTgwMzAzMDc0MTMyWhcNMDgwMjI5MDc0MTMyWjCB
-kjELMAkGA1UEBhMCQVUxEzARBgNVBAgTClF1ZWVuc2xhbmQxETAPBgNVBAcTCEJyaXNiYW5l
-MRowGAYDVQQKExFDcnlwdHNvZnQgUHR5IEx0ZDEiMCAGA1UECxMZREVNT05TVFJBVElPTiBB
-TkQgVEVTVElORzEbMBkGA1UEAxMSREVNTyBaRVJPIFZBTFVFIENBMFwwDQYJKoZIhvcNAQEB
-BQADSwAwSAJBAL+0E2fLej3FSCwe2A2iRnMuC3z12qHIp6Ky1wo2zZcxft7AI+RfkrWrSGtf
-mfzBEuPrLdfulncC5Y1pNcM8RTUCAwEAATANBgkqhkiG9w0BAQQFAANBAGSbLMphL6F5pp3s
-8o0Xyh86FHFdpVOwYx09ELLkuG17V/P9pgIc0Eo/gDMbN+KT3IdgECf8S//pCRA6RrNjcXIx
-ggGzMIIBrwIBATCBmTCBkjELMAkGA1UEBhMCQVUxEzARBgNVBAgTClF1ZWVuc2xhbmQxETAP
-BgNVBAcTCEJyaXNiYW5lMRowGAYDVQQKExFDcnlwdHNvZnQgUHR5IEx0ZDEiMCAGA1UECxMZ
-REVNT05TVFJBVElPTiBBTkQgVEVTVElORzEbMBkGA1UEAxMSREVNTyBaRVJPIFZBTFVFIENB
-AgIEfjAJBgUrDgMCGgUAoIGxMBgGCSqGSIb3DQEJAzELBgkqhkiG9w0BBwEwHAYJKoZIhvcN
-AQkFMQ8XDTk4MDUxNDAzNDAyN1owIwYJKoZIhvcNAQkEMRYEFOKcV8mNYJnM8rHQajcSEqJN
-rwdDMFIGCSqGSIb3DQEJDzFFMEMwCgYIKoZIhvcNAwcwDgYIKoZIhvcNAwICAgCAMAcGBSsO
-AwIHMA0GCCqGSIb3DQMCAgFAMA0GCCqGSIb3DQMCAgEoMA0GCSqGSIb3DQEBAQUABEADPE/N
-coH+zTFuX5YpolupTKxKK8eEjc48TuADuO8bIHHDE/fEYaWunlwDuTlcFJl1ig0idffPB1qC
-Zp8SSVVY
---------------msD7863B84BD61E02C407F2F5E--
-
-
-From angela@c2.net.au Thu May 14 14:05:32 1998
-X-UIDL: a7d629b4b9acacaee8b39371b860a32a
-Return-Path: angela@c2.net.au
-Received: from cryptsoft.com (play.cryptsoft.com [203.56.44.3]) by pandora.cryptsoft.com (8.8.3/8.7.3) with ESMTP id OAA28033 for <tjh@cryptsoft.com>; Thu, 14 May 1998 14:05:32 +1000 (EST)
-Message-ID: <355A6F3B.AC385981@cryptsoft.com>
-Date: Thu, 14 May 1998 14:12:43 +1000
-From: Angela van Lent <angela@c2.net.au>
-X-Mailer: Mozilla 4.03 [en] (Win95; U)
-MIME-Version: 1.0
-To: tjh@cryptsoft.com
-Subject: encrypted
-Content-Type: application/x-pkcs7-mime; name="smime.p7m"
-Content-Transfer-Encoding: base64
-Content-Disposition: attachment; filename="smime.p7m"
-Content-Description: S/MIME Encrypted Message
-Content-Length: 905
-Status: OR
-
-MIAGCSqGSIb3DQEHA6CAMIACAQAxggHmMIHwAgEAMIGZMIGSMQswCQYDVQQGEwJBVTETMBEG
-A1UECBMKUXVlZW5zbGFuZDERMA8GA1UEBxMIQnJpc2JhbmUxGjAYBgNVBAoTEUNyeXB0c29m
-dCBQdHkgTHRkMSIwIAYDVQQLExlERU1PTlNUUkFUSU9OIEFORCBURVNUSU5HMRswGQYDVQQD
-ExJERU1PIFpFUk8gVkFMVUUgQ0ECAgR+MA0GCSqGSIb3DQEBAQUABEA92N29Yk39RUY2tIVd
-exGT2MFX3J6H8LB8aDRJjw7843ALgJ5zXpM5+f80QkAWwEN2A6Pl3VxiCeKLi435zXVyMIHw
-AgEAMIGZMIGSMQswCQYDVQQGEwJBVTETMBEGA1UECBMKUXVlZW5zbGFuZDERMA8GA1UEBxMI
-QnJpc2JhbmUxGjAYBgNVBAoTEUNyeXB0c29mdCBQdHkgTHRkMSIwIAYDVQQLExlERU1PTlNU
-UkFUSU9OIEFORCBURVNUSU5HMRswGQYDVQQDExJERU1PIFpFUk8gVkFMVUUgQ0ECAgRuMA0G
-CSqGSIb3DQEBAQUABECR9IfyHtvnjFmZ8B2oUCEs1vxMsG0u1kxKE4RMPFyDqDCEARq7zXMg
-nzSUI7Wgv5USSKDqcLRJeW+jvYURv/nJMIAGCSqGSIb3DQEHATAaBggqhkiG9w0DAjAOAgIA
-oAQIrLqrij2ZMpeggAQoibtn6reRZWuWk5Iv5IAhgitr8EYE4w4ySQ7EMB6mTlBoFpccUMWX
-BwQgQn1UoWCvYAlhDzURdbui64Dc0rS2wtj+kE/InS6y25EEEPe4NUKaF8/UlE+lo3LtILQE
-CL3uV8k7m0iqAAAAAAAAAAAAAA==
-
diff --git a/crypto/openssl/crypto/pkcs7/t/s.pem b/crypto/openssl/crypto/pkcs7/t/s.pem
deleted file mode 100644
index 4fa925b1824a..000000000000
--- a/crypto/openssl/crypto/pkcs7/t/s.pem
+++ /dev/null
@@ -1,57 +0,0 @@
------BEGIN RSA PRIVATE KEY-----
-MIIBOgIBAAJBAK3nI4nuDYe3nDJES5WBc90igEstxWC4/h4YY+/ciYki35U8ets9
-mgaoCNYp/e9BCZHtvK2Y+fYokGJv5+cMTQsCAwEAAQJBAIHpvXvqEcOEoDRRHuIG
-fkcB4jPHcr9KE9TpxabH6xs9beN6OJnkePXAHwaz5MnUgSnbpOKq+cw8miKjXwe/
-zVECIQDVLwncT2lRmXarEYHzb+q/0uaSvKhWKKt3kJasLNTrAwIhANDUc/ghut29
-p3jJYjurzUKuG774/5eLjPLsxPPIZzNZAiA/10hSq41UnGqHLEUIS9m2/EeEZe7b
-bm567dfRU9OnVQIgDo8ROrZXSchEGbaog5J5r/Fle83uO8l93R3GqVxKXZkCIFfk
-IPD5PIYQAyyod3hyKKza7ZP4CGY4oOfZetbkSGGG
------END RSA PRIVATE KEY-----
-issuer :/C=AU/SP=Queensland/L=Brisbane/O=Cryptsoft Pty Ltd/OU=DEMONSTRATION AND TESTING/CN=DEMO ZERO VALUE CA
-subject:/C=AU/SP=Queensland/L=Brisbane/O=Cryptsoft Pty Ltd/OU=SMIME 003/CN=Information/Email=info@cryptsoft.com
-serial :047D
-
-Certificate:
-    Data:
-        Version: 3 (0x2)
-        Serial Number: 1149 (0x47d)
-        Signature Algorithm: md5withRSAEncryption
-        Issuer: C=AU, SP=Queensland, L=Brisbane, O=Cryptsoft Pty Ltd, OU=DEMONSTRATION AND TESTING, CN=DEMO ZERO VALUE CA
-        Validity
-            Not Before: May 13 05:40:58 1998 GMT
-            Not After : May 12 05:40:58 2000 GMT
-        Subject: C=AU, SP=Queensland, L=Brisbane, O=Cryptsoft Pty Ltd, OU=SMIME 003, CN=Information/Email=info@cryptsoft.com
-        Subject Public Key Info:
-            Public Key Algorithm: rsaEncryption
-                Modulus:
-                    00:ad:e7:23:89:ee:0d:87:b7:9c:32:44:4b:95:81:
-                    73:dd:22:80:4b:2d:c5:60:b8:fe:1e:18:63:ef:dc:
-                    89:89:22:df:95:3c:7a:db:3d:9a:06:a8:08:d6:29:
-                    fd:ef:41:09:91:ed:bc:ad:98:f9:f6:28:90:62:6f:
-                    e7:e7:0c:4d:0b
-                Exponent: 65537 (0x10001)
-        X509v3 extensions:
-            Netscape Comment: 
-                Generated with SSLeay
-    Signature Algorithm: md5withRSAEncryption
-        52:15:ea:88:f4:f0:f9:0b:ef:ce:d5:f8:83:40:61:16:5e:55:
-        f9:ce:2d:d1:8b:31:5c:03:c6:2d:10:7c:61:d5:5c:0a:42:97:
-        d1:fd:65:b6:b6:84:a5:39:ec:46:ec:fc:e0:0d:d9:22:da:1b:
-        50:74:ad:92:cb:4e:90:e5:fa:7d
-
------BEGIN CERTIFICATE-----
-MIICTDCCAfagAwIBAgICBH0wDQYJKoZIhvcNAQEEBQAwgZIxCzAJBgNVBAYTAkFV
-MRMwEQYDVQQIEwpRdWVlbnNsYW5kMREwDwYDVQQHEwhCcmlzYmFuZTEaMBgGA1UE
-ChMRQ3J5cHRzb2Z0IFB0eSBMdGQxIjAgBgNVBAsTGURFTU9OU1RSQVRJT04gQU5E
-IFRFU1RJTkcxGzAZBgNVBAMTEkRFTU8gWkVSTyBWQUxVRSBDQTAeFw05ODA1MTMw
-NTQwNThaFw0wMDA1MTIwNTQwNThaMIGeMQswCQYDVQQGEwJBVTETMBEGA1UECBMK
-UXVlZW5zbGFuZDERMA8GA1UEBxMIQnJpc2JhbmUxGjAYBgNVBAoTEUNyeXB0c29m
-dCBQdHkgTHRkMRIwEAYDVQQLEwlTTUlNRSAwMDMxFDASBgNVBAMTC0luZm9ybWF0
-aW9uMSEwHwYJKoZIhvcNAQkBFhJpbmZvQGNyeXB0c29mdC5jb20wXDANBgkqhkiG
-9w0BAQEFAANLADBIAkEArecjie4Nh7ecMkRLlYFz3SKASy3FYLj+Hhhj79yJiSLf
-lTx62z2aBqgI1in970EJke28rZj59iiQYm/n5wxNCwIDAQABoygwJjAkBglghkgB
-hvhCAQ0EFxYVR2VuZXJhdGVkIHdpdGggU1NMZWF5MA0GCSqGSIb3DQEBBAUAA0EA
-UhXqiPTw+QvvztX4g0BhFl5V+c4t0YsxXAPGLRB8YdVcCkKX0f1ltraEpTnsRuz8
-4A3ZItobUHStkstOkOX6fQ==
------END CERTIFICATE-----
-
diff --git a/crypto/openssl/crypto/pkcs7/t/server.pem b/crypto/openssl/crypto/pkcs7/t/server.pem
deleted file mode 100644
index 989baf87096a..000000000000
--- a/crypto/openssl/crypto/pkcs7/t/server.pem
+++ /dev/null
@@ -1,57 +0,0 @@
-issuer :/C=AU/SP=Queensland/L=Brisbane/O=Cryptsoft Pty Ltd/OU=DEMONSTRATION AND TESTING/CN=DEMO ZERO VALUE CA
-subject:/C=AU/SP=Queensland/L=Brisbane/O=Cryptsoft Pty Ltd/OU=SMIME 003/CN=Information/Email=info@cryptsoft.com
-serial :047D
-
-Certificate:
-    Data:
-        Version: 3 (0x2)
-        Serial Number: 1149 (0x47d)
-        Signature Algorithm: md5withRSAEncryption
-        Issuer: C=AU, SP=Queensland, L=Brisbane, O=Cryptsoft Pty Ltd, OU=DEMONSTRATION AND TESTING, CN=DEMO ZERO VALUE CA
-        Validity
-            Not Before: May 13 05:40:58 1998 GMT
-            Not After : May 12 05:40:58 2000 GMT
-        Subject: C=AU, SP=Queensland, L=Brisbane, O=Cryptsoft Pty Ltd, OU=SMIME 003, CN=Information/Email=info@cryptsoft.com
-        Subject Public Key Info:
-            Public Key Algorithm: rsaEncryption
-                Modulus:
-                    00:ad:e7:23:89:ee:0d:87:b7:9c:32:44:4b:95:81:
-                    73:dd:22:80:4b:2d:c5:60:b8:fe:1e:18:63:ef:dc:
-                    89:89:22:df:95:3c:7a:db:3d:9a:06:a8:08:d6:29:
-                    fd:ef:41:09:91:ed:bc:ad:98:f9:f6:28:90:62:6f:
-                    e7:e7:0c:4d:0b
-                Exponent: 65537 (0x10001)
-        X509v3 extensions:
-            Netscape Comment: 
-                Generated with SSLeay
-    Signature Algorithm: md5withRSAEncryption
-        52:15:ea:88:f4:f0:f9:0b:ef:ce:d5:f8:83:40:61:16:5e:55:
-        f9:ce:2d:d1:8b:31:5c:03:c6:2d:10:7c:61:d5:5c:0a:42:97:
-        d1:fd:65:b6:b6:84:a5:39:ec:46:ec:fc:e0:0d:d9:22:da:1b:
-        50:74:ad:92:cb:4e:90:e5:fa:7d
-
------BEGIN CERTIFICATE-----
-MIICTDCCAfagAwIBAgICBH0wDQYJKoZIhvcNAQEEBQAwgZIxCzAJBgNVBAYTAkFV
-MRMwEQYDVQQIEwpRdWVlbnNsYW5kMREwDwYDVQQHEwhCcmlzYmFuZTEaMBgGA1UE
-ChMRQ3J5cHRzb2Z0IFB0eSBMdGQxIjAgBgNVBAsTGURFTU9OU1RSQVRJT04gQU5E
-IFRFU1RJTkcxGzAZBgNVBAMTEkRFTU8gWkVSTyBWQUxVRSBDQTAeFw05ODA1MTMw
-NTQwNThaFw0wMDA1MTIwNTQwNThaMIGeMQswCQYDVQQGEwJBVTETMBEGA1UECBMK
-UXVlZW5zbGFuZDERMA8GA1UEBxMIQnJpc2JhbmUxGjAYBgNVBAoTEUNyeXB0c29m
-dCBQdHkgTHRkMRIwEAYDVQQLEwlTTUlNRSAwMDMxFDASBgNVBAMTC0luZm9ybWF0
-aW9uMSEwHwYJKoZIhvcNAQkBFhJpbmZvQGNyeXB0c29mdC5jb20wXDANBgkqhkiG
-9w0BAQEFAANLADBIAkEArecjie4Nh7ecMkRLlYFz3SKASy3FYLj+Hhhj79yJiSLf
-lTx62z2aBqgI1in970EJke28rZj59iiQYm/n5wxNCwIDAQABoygwJjAkBglghkgB
-hvhCAQ0EFxYVR2VuZXJhdGVkIHdpdGggU1NMZWF5MA0GCSqGSIb3DQEBBAUAA0EA
-UhXqiPTw+QvvztX4g0BhFl5V+c4t0YsxXAPGLRB8YdVcCkKX0f1ltraEpTnsRuz8
-4A3ZItobUHStkstOkOX6fQ==
------END CERTIFICATE-----
-
------BEGIN RSA PRIVATE KEY-----
-MIIBOgIBAAJBAK3nI4nuDYe3nDJES5WBc90igEstxWC4/h4YY+/ciYki35U8ets9
-mgaoCNYp/e9BCZHtvK2Y+fYokGJv5+cMTQsCAwEAAQJBAIHpvXvqEcOEoDRRHuIG
-fkcB4jPHcr9KE9TpxabH6xs9beN6OJnkePXAHwaz5MnUgSnbpOKq+cw8miKjXwe/
-zVECIQDVLwncT2lRmXarEYHzb+q/0uaSvKhWKKt3kJasLNTrAwIhANDUc/ghut29
-p3jJYjurzUKuG774/5eLjPLsxPPIZzNZAiA/10hSq41UnGqHLEUIS9m2/EeEZe7b
-bm567dfRU9OnVQIgDo8ROrZXSchEGbaog5J5r/Fle83uO8l93R3GqVxKXZkCIFfk
-IPD5PIYQAyyod3hyKKza7ZP4CGY4oOfZetbkSGGG
------END RSA PRIVATE KEY-----
diff --git a/crypto/openssl/crypto/pkcs7/verify.c b/crypto/openssl/crypto/pkcs7/verify.c
deleted file mode 100644
index b40f26032ec6..000000000000
--- a/crypto/openssl/crypto/pkcs7/verify.c
+++ /dev/null
@@ -1,263 +0,0 @@
-/* crypto/pkcs7/verify.c */
-/* Copyright (C) 1995-1998 Eric Young (eay@cryptsoft.com)
- * All rights reserved.
- *
- * This package is an SSL implementation written
- * by Eric Young (eay@cryptsoft.com).
- * The implementation was written so as to conform with Netscapes SSL.
- * 
- * This library is free for commercial and non-commercial use as long as
- * the following conditions are aheared to.  The following conditions
- * apply to all code found in this distribution, be it the RC4, RSA,
- * lhash, DES, etc., code; not just the SSL code.  The SSL documentation
- * included with this distribution is covered by the same copyright terms
- * except that the holder is Tim Hudson (tjh@cryptsoft.com).
- * 
- * Copyright remains Eric Young's, and as such any Copyright notices in
- * the code are not to be removed.
- * If this package is used in a product, Eric Young should be given attribution
- * as the author of the parts of the library used.
- * This can be in the form of a textual message at program startup or
- * in documentation (online or textual) provided with the package.
- * 
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions
- * are met:
- * 1. Redistributions of source code must retain the copyright
- *    notice, this list of conditions and the following disclaimer.
- * 2. Redistributions in binary form must reproduce the above copyright
- *    notice, this list of conditions and the following disclaimer in the
- *    documentation and/or other materials provided with the distribution.
- * 3. All advertising materials mentioning features or use of this software
- *    must display the following acknowledgement:
- *    "This product includes cryptographic software written by
- *     Eric Young (eay@cryptsoft.com)"
- *    The word 'cryptographic' can be left out if the rouines from the library
- *    being used are not cryptographic related :-).
- * 4. If you include any Windows specific code (or a derivative thereof) from 
- *    the apps directory (application code) you must include an acknowledgement:
- *    "This product includes software written by Tim Hudson (tjh@cryptsoft.com)"
- * 
- * THIS SOFTWARE IS PROVIDED BY ERIC YOUNG ``AS IS'' AND
- * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
- * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
- * ARE DISCLAIMED.  IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE
- * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
- * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
- * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
- * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
- * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
- * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
- * SUCH DAMAGE.
- * 
- * The licence and distribution terms for any publically available version or
- * derivative of this code cannot be changed.  i.e. this code cannot simply be
- * copied and put under another distribution licence
- * [including the GNU Public Licence.]
- */
-#include <stdio.h>
-#include <string.h>
-#include <openssl/bio.h>
-#include <openssl/asn1.h>
-#include <openssl/x509.h>
-#include <openssl/pem.h>
-#include <openssl/err.h>
-#include "example.h"
-
-int verify_callback(int ok, X509_STORE_CTX *ctx);
-
-BIO *bio_err=NULL;
-BIO *bio_out=NULL;
-
-int main(argc,argv)
-int argc;
-char *argv[];
-	{
-	PKCS7 *p7;
-	PKCS7_SIGNER_INFO *si;
-	X509_STORE_CTX cert_ctx;
-	X509_STORE *cert_store=NULL;
-	BIO *data,*detached=NULL,*p7bio=NULL;
-	char buf[1024*4];
-	char *pp;
-	int i,printit=0;
-	STACK_OF(PKCS7_SIGNER_INFO) *sk;
-
-	bio_err=BIO_new_fp(stderr,BIO_NOCLOSE);
-	bio_out=BIO_new_fp(stdout,BIO_NOCLOSE);
-#ifndef OPENSSL_NO_MD2
-	EVP_add_digest(EVP_md2());
-#endif
-#ifndef OPENSSL_NO_MD5
-	EVP_add_digest(EVP_md5());
-#endif
-#ifndef OPENSSL_NO_SHA1
-	EVP_add_digest(EVP_sha1());
-#endif
-#ifndef OPENSSL_NO_MDC2
-	EVP_add_digest(EVP_mdc2());
-#endif
-
-	data=BIO_new(BIO_s_file());
-
-	pp=NULL;
-	while (argc > 1)
-		{
-		argc--;
-		argv++;
-		if (strcmp(argv[0],"-p") == 0)
-			{
-			printit=1;
-			}
-		else if ((strcmp(argv[0],"-d") == 0) && (argc >= 2))
-			{
-			detached=BIO_new(BIO_s_file());
-			if (!BIO_read_filename(detached,argv[1]))
-				goto err;
-			argc--;
-			argv++;
-			}
-		else
-			{
-			pp=argv[0];
-			if (!BIO_read_filename(data,argv[0]))
-				goto err;
-			}
-		}
-
-	if (pp == NULL)
-		BIO_set_fp(data,stdin,BIO_NOCLOSE);
-
-
-	/* Load the PKCS7 object from a file */
-	if ((p7=PEM_read_bio_PKCS7(data,NULL,NULL,NULL)) == NULL) goto err;
-
-	/* This stuff is being setup for certificate verification.
-	 * When using SSL, it could be replaced with a 
-	 * cert_stre=SSL_CTX_get_cert_store(ssl_ctx); */
-	cert_store=X509_STORE_new();
-	X509_STORE_set_default_paths(cert_store);
-	X509_STORE_load_locations(cert_store,NULL,"../../certs");
-	X509_STORE_set_verify_cb_func(cert_store,verify_callback);
-
-	ERR_clear_error();
-
-	/* We need to process the data */
-	if ((PKCS7_get_detached(p7) || detached))
-		{
-		if (detached == NULL)
-			{
-			printf("no data to verify the signature on\n");
-			exit(1);
-			}
-		else
-			p7bio=PKCS7_dataInit(p7,detached);
-		}
-	else
-		{
-		p7bio=PKCS7_dataInit(p7,NULL);
-		}
-
-	/* We now have to 'read' from p7bio to calculate digests etc. */
-	for (;;)
-		{
-		i=BIO_read(p7bio,buf,sizeof(buf));
-		/* print it? */
-		if (i <= 0) break;
-		}
-
-	/* We can now verify signatures */
-	sk=PKCS7_get_signer_info(p7);
-	if (sk == NULL)
-		{
-		printf("there are no signatures on this data\n");
-		exit(1);
-		}
-
-	/* Ok, first we need to, for each subject entry, see if we can verify */
-	for (i=0; i<sk_PKCS7_SIGNER_INFO_num(sk); i++)
-		{
-		ASN1_UTCTIME *tm;
-		char *str1,*str2;
-		int rc;
-
-		si=sk_PKCS7_SIGNER_INFO_value(sk,i);
-		rc=PKCS7_dataVerify(cert_store,&cert_ctx,p7bio,p7,si);
-		if (rc <= 0)
-			goto err;
-		printf("signer info\n");
-		if ((tm=get_signed_time(si)) != NULL)
-			{
-			BIO_printf(bio_out,"Signed time:");
-			ASN1_UTCTIME_print(bio_out,tm);
-			ASN1_UTCTIME_free(tm);
-			BIO_printf(bio_out,"\n");
-			}
-		if (get_signed_seq2string(si,&str1,&str2))
-			{
-			BIO_printf(bio_out,"String 1 is %s\n",str1);
-			BIO_printf(bio_out,"String 2 is %s\n",str2);
-			}
-
-		}
-
-	X509_STORE_free(cert_store);
-
-	printf("done\n");
-	exit(0);
-err:
-	ERR_load_crypto_strings();
-	ERR_print_errors_fp(stderr);
-	exit(1);
-	}
-
-/* should be X509 * but we can just have them as char *. */
-int verify_callback(int ok, X509_STORE_CTX *ctx)
-	{
-	char buf[256];
-	X509 *err_cert;
-	int err,depth;
-
-	err_cert=X509_STORE_CTX_get_current_cert(ctx);
-	err=	X509_STORE_CTX_get_error(ctx);
-	depth=	X509_STORE_CTX_get_error_depth(ctx);
-
-	X509_NAME_oneline(X509_get_subject_name(err_cert),buf,256);
-	BIO_printf(bio_err,"depth=%d %s\n",depth,buf);
-	if (!ok)
-		{
-		BIO_printf(bio_err,"verify error:num=%d:%s\n",err,
-			X509_verify_cert_error_string(err));
-		if (depth < 6)
-			{
-			ok=1;
-			X509_STORE_CTX_set_error(ctx,X509_V_OK);
-			}
-		else
-			{
-			ok=0;
-			X509_STORE_CTX_set_error(ctx,X509_V_ERR_CERT_CHAIN_TOO_LONG);
-			}
-		}
-	switch (ctx->error)
-		{
-	case X509_V_ERR_UNABLE_TO_GET_ISSUER_CERT:
-		X509_NAME_oneline(X509_get_issuer_name(ctx->current_cert),buf,256);
-		BIO_printf(bio_err,"issuer= %s\n",buf);
-		break;
-	case X509_V_ERR_CERT_NOT_YET_VALID:
-	case X509_V_ERR_ERROR_IN_CERT_NOT_BEFORE_FIELD:
-		BIO_printf(bio_err,"notBefore=");
-		ASN1_UTCTIME_print(bio_err,X509_get_notBefore(ctx->current_cert));
-		BIO_printf(bio_err,"\n");
-		break;
-	case X509_V_ERR_CERT_HAS_EXPIRED:
-	case X509_V_ERR_ERROR_IN_CERT_NOT_AFTER_FIELD:
-		BIO_printf(bio_err,"notAfter=");
-		ASN1_UTCTIME_print(bio_err,X509_get_notAfter(ctx->current_cert));
-		BIO_printf(bio_err,"\n");
-		break;
-		}
-	BIO_printf(bio_err,"verify return:%d\n",ok);
-	return(ok);
-	}
diff --git a/crypto/openssl/crypto/pqueue/Makefile b/crypto/openssl/crypto/pqueue/Makefile
deleted file mode 100644
index d0c39d25cef8..000000000000
--- a/crypto/openssl/crypto/pqueue/Makefile
+++ /dev/null
@@ -1,84 +0,0 @@
-#
-# OpenSSL/crypto/pqueue/Makefile
-#
-
-DIR=	pqueue
-TOP=	../..
-CC=	cc
-INCLUDES=
-CFLAG=-g
-MAKEFILE=	Makefile
-AR=		ar r
-
-CFLAGS= $(INCLUDES) $(CFLAG)
-
-GENERAL=Makefile
-TEST=
-APPS=
-
-LIB=$(TOP)/libcrypto.a
-LIBSRC=pqueue.c
-LIBOBJ=pqueue.o
-
-SRC= $(LIBSRC)
-
-EXHEADER= pqueue.h pq_compat.h
-HEADER=	$(EXHEADER)
-
-ALL=    $(GENERAL) $(SRC) $(HEADER)
-
-top:
-	(cd ../..; $(MAKE) DIRS=crypto SDIRS=$(DIR) sub_all)
-
-all:	lib
-
-lib:	$(LIBOBJ)
-	$(AR) $(LIB) $(LIBOBJ)
-	$(RANLIB) $(LIB) || echo Never mind.
-	@touch lib
-
-files:
-	$(PERL) $(TOP)/util/files.pl Makefile >> $(TOP)/MINFO
-
-links:
-	@$(PERL) $(TOP)/util/mklink.pl ../../include/openssl $(EXHEADER)
-	@$(PERL) $(TOP)/util/mklink.pl ../../test $(TEST)
-	@$(PERL) $(TOP)/util/mklink.pl ../../apps $(APPS)
-
-install:
-	@[ -n "$(INSTALLTOP)" ] # should be set by top Makefile...
-	@headerlist="$(EXHEADER)"; for i in $$headerlist ; \
-	do  \
-	(cp $$i $(INSTALL_PREFIX)$(INSTALLTOP)/include/openssl/$$i; \
-	chmod 644 $(INSTALL_PREFIX)$(INSTALLTOP)/include/openssl/$$i ); \
-	done;
-
-tags:
-	ctags $(SRC)
-
-tests:
-
-lint:
-	lint -DLINT $(INCLUDES) $(SRC)>fluff
-
-depend:
-	@[ -n "$(MAKEDEPEND)" ] # should be set by upper Makefile...
-	$(MAKEDEPEND) -- $(CFLAG) $(INCLUDES) $(DEPFLAG) -- $(PROGS) $(LIBSRC)
-
-dclean:
-	$(PERL) -pe 'if (/^# DO NOT DELETE THIS LINE/) {print; exit(0);}' $(MAKEFILE) >Makefile.new
-	mv -f Makefile.new $(MAKEFILE)
-
-clean:
-	rm -f *.o *.obj lib tags core .pure .nfs* *.old *.bak fluff
-
-# DO NOT DELETE THIS LINE -- make depend depends on it.
-
-pqueue.o: ../../e_os.h ../../include/openssl/bio.h ../../include/openssl/bn.h
-pqueue.o: ../../include/openssl/buffer.h ../../include/openssl/crypto.h
-pqueue.o: ../../include/openssl/e_os2.h ../../include/openssl/err.h
-pqueue.o: ../../include/openssl/lhash.h ../../include/openssl/opensslconf.h
-pqueue.o: ../../include/openssl/opensslv.h ../../include/openssl/ossl_typ.h
-pqueue.o: ../../include/openssl/pq_compat.h ../../include/openssl/safestack.h
-pqueue.o: ../../include/openssl/stack.h ../../include/openssl/symhacks.h
-pqueue.o: ../cryptlib.h pqueue.c pqueue.h
diff --git a/crypto/openssl/crypto/pqueue/pq_compat.h b/crypto/openssl/crypto/pqueue/pq_compat.h
deleted file mode 100644
index 28c58a0261d9..000000000000
--- a/crypto/openssl/crypto/pqueue/pq_compat.h
+++ /dev/null
@@ -1,147 +0,0 @@
-/* crypto/pqueue/pqueue_compat.h */
-/* 
- * DTLS implementation written by Nagendra Modadugu
- * (nagendra@cs.stanford.edu) for the OpenSSL project 2005.  
- */
-/* ====================================================================
- * Copyright (c) 1999-2005 The OpenSSL Project.  All rights reserved.
- *
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions
- * are met:
- *
- * 1. Redistributions of source code must retain the above copyright
- *    notice, this list of conditions and the following disclaimer. 
- *
- * 2. Redistributions in binary form must reproduce the above copyright
- *    notice, this list of conditions and the following disclaimer in
- *    the documentation and/or other materials provided with the
- *    distribution.
- *
- * 3. All advertising materials mentioning features or use of this
- *    software must display the following acknowledgment:
- *    "This product includes software developed by the OpenSSL Project
- *    for use in the OpenSSL Toolkit. (http://www.OpenSSL.org/)"
- *
- * 4. The names "OpenSSL Toolkit" and "OpenSSL Project" must not be used to
- *    endorse or promote products derived from this software without
- *    prior written permission. For written permission, please contact
- *    openssl-core@OpenSSL.org.
- *
- * 5. Products derived from this software may not be called "OpenSSL"
- *    nor may "OpenSSL" appear in their names without prior written
- *    permission of the OpenSSL Project.
- *
- * 6. Redistributions of any form whatsoever must retain the following
- *    acknowledgment:
- *    "This product includes software developed by the OpenSSL Project
- *    for use in the OpenSSL Toolkit (http://www.OpenSSL.org/)"
- *
- * THIS SOFTWARE IS PROVIDED BY THE OpenSSL PROJECT ``AS IS'' AND ANY
- * EXPRESSED OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
- * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR
- * PURPOSE ARE DISCLAIMED.  IN NO EVENT SHALL THE OpenSSL PROJECT OR
- * ITS CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
- * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
- * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
- * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
- * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
- * STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
- * ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED
- * OF THE POSSIBILITY OF SUCH DAMAGE.
- * ====================================================================
- *
- * This product includes cryptographic software written by Eric Young
- * (eay@cryptsoft.com).  This product includes software written by Tim
- * Hudson (tjh@cryptsoft.com).
- *
- */
-
-#include "opensslconf.h"
-#include <openssl/bn.h>
-
-/* 
- * The purpose of this header file is for supporting 64-bit integer
- * manipulation on 32-bit (and lower) machines.  Currently the only
- * such environment is VMS, Utrix and those with smaller default integer
- * sizes than 32 bits.  For all such environment, we fall back to using
- * BIGNUM.  We may need to fine tune the conditions for systems that
- * are incorrectly configured.
- *
- * The only clients of this code are (1) pqueue for priority, and
- * (2) DTLS, for sequence number manipulation.
- */
-
-#if (defined(THIRTY_TWO_BIT) && !defined(BN_LLONG)) || defined(SIXTEEN_BIT) || defined(EIGHT_BIT)
-
-#define PQ_64BIT_IS_INTEGER 0
-#define PQ_64BIT_IS_BIGNUM 1
-
-#define PQ_64BIT     BIGNUM
-#define PQ_64BIT_CTX BN_CTX
-
-#define pq_64bit_init(x)           BN_init(x)
-#define pq_64bit_free(x)           BN_free(x)
-
-#define pq_64bit_ctx_new(ctx)      BN_CTX_new()
-#define pq_64bit_ctx_free(x)       BN_CTX_free(x)
-
-#define pq_64bit_assign(x, y)      BN_copy(x, y)
-#define pq_64bit_assign_word(x, y) BN_set_word(x, y)
-#define pq_64bit_gt(x, y)          BN_ucmp(x, y) >= 1 ? 1 : 0
-#define pq_64bit_eq(x, y)          BN_ucmp(x, y) == 0 ? 1 : 0
-#define pq_64bit_add_word(x, w)    BN_add_word(x, w)
-#define pq_64bit_sub(r, x, y)      BN_sub(r, x, y)
-#define pq_64bit_sub_word(x, w)    BN_sub_word(x, w)
-#define pq_64bit_mod(r, x, n, ctx) BN_mod(r, x, n, ctx)
-
-#define pq_64bit_bin2num(bn, bytes, len)   BN_bin2bn(bytes, len, bn)
-#define pq_64bit_num2bin(bn, bytes)        BN_bn2bin(bn, bytes)
-#define pq_64bit_get_word(x)               BN_get_word(x)
-#define pq_64bit_is_bit_set(x, offset)     BN_is_bit_set(x, offset)
-#define pq_64bit_lshift(r, x, shift)       BN_lshift(r, x, shift)
-#define pq_64bit_set_bit(x, num)           BN_set_bit(x, num)
-#define pq_64bit_get_length(x)             BN_num_bits((x))
-
-#else
-
-#define PQ_64BIT_IS_INTEGER 1
-#define PQ_64BIT_IS_BIGNUM 0
-
-#if defined(SIXTY_FOUR_BIT)
-#define PQ_64BIT BN_ULONG
-#define PQ_64BIT_PRINT "%lld"
-#elif defined(SIXTY_FOUR_BIT_LONG)
-#define PQ_64BIT BN_ULONG
-#define PQ_64BIT_PRINT "%ld"
-#elif defined(THIRTY_TWO_BIT)
-#define PQ_64BIT BN_ULLONG
-#define PQ_64BIT_PRINT "%lld"
-#endif
-
-#define PQ_64BIT_CTX      void
-
-#define pq_64bit_init(x)
-#define pq_64bit_free(x)
-#define pq_64bit_ctx_new(ctx)        (ctx)
-#define pq_64bit_ctx_free(x)
-
-#define pq_64bit_assign(x, y)        (*(x) = *(y))
-#define pq_64bit_assign_word(x, y)   (*(x) = y)
-#define pq_64bit_gt(x, y)	         (*(x) > *(y))
-#define pq_64bit_eq(x, y)            (*(x) == *(y))
-#define pq_64bit_add_word(x, w)      (*(x) = (*(x) + (w)))
-#define pq_64bit_sub(r, x, y)        (*(r) = (*(x) - *(y)))
-#define pq_64bit_sub_word(x, w)      (*(x) = (*(x) - (w)))
-#define pq_64bit_mod(r, x, n, ctx)
-
-#define pq_64bit_bin2num(num, bytes, len) bytes_to_long_long(bytes, num)
-#define pq_64bit_num2bin(num, bytes)      long_long_to_bytes(num, bytes)
-#define pq_64bit_get_word(x)              *(x)
-#define pq_64bit_lshift(r, x, shift)      (*(r) = (*(x) << (shift)))
-#define pq_64bit_set_bit(x, num)          do { \
-                                              PQ_64BIT mask = 1; \
-                                              mask = mask << (num); \
-                                              *(x) |= mask; \
-                                          } while(0)
-#endif /* OPENSSL_SYS_VMS */
diff --git a/crypto/openssl/crypto/pqueue/pq_test.c b/crypto/openssl/crypto/pqueue/pq_test.c
deleted file mode 100644
index 8d496dfc655b..000000000000
--- a/crypto/openssl/crypto/pqueue/pq_test.c
+++ /dev/null
@@ -1,95 +0,0 @@
-/* crypto/pqueue/pq_test.c */
-/* 
- * DTLS implementation written by Nagendra Modadugu
- * (nagendra@cs.stanford.edu) for the OpenSSL project 2005.  
- */
-/* ====================================================================
- * Copyright (c) 1999-2005 The OpenSSL Project.  All rights reserved.
- *
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions
- * are met:
- *
- * 1. Redistributions of source code must retain the above copyright
- *    notice, this list of conditions and the following disclaimer. 
- *
- * 2. Redistributions in binary form must reproduce the above copyright
- *    notice, this list of conditions and the following disclaimer in
- *    the documentation and/or other materials provided with the
- *    distribution.
- *
- * 3. All advertising materials mentioning features or use of this
- *    software must display the following acknowledgment:
- *    "This product includes software developed by the OpenSSL Project
- *    for use in the OpenSSL Toolkit. (http://www.OpenSSL.org/)"
- *
- * 4. The names "OpenSSL Toolkit" and "OpenSSL Project" must not be used to
- *    endorse or promote products derived from this software without
- *    prior written permission. For written permission, please contact
- *    openssl-core@OpenSSL.org.
- *
- * 5. Products derived from this software may not be called "OpenSSL"
- *    nor may "OpenSSL" appear in their names without prior written
- *    permission of the OpenSSL Project.
- *
- * 6. Redistributions of any form whatsoever must retain the following
- *    acknowledgment:
- *    "This product includes software developed by the OpenSSL Project
- *    for use in the OpenSSL Toolkit (http://www.OpenSSL.org/)"
- *
- * THIS SOFTWARE IS PROVIDED BY THE OpenSSL PROJECT ``AS IS'' AND ANY
- * EXPRESSED OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
- * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR
- * PURPOSE ARE DISCLAIMED.  IN NO EVENT SHALL THE OpenSSL PROJECT OR
- * ITS CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
- * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
- * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
- * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
- * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
- * STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
- * ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED
- * OF THE POSSIBILITY OF SUCH DAMAGE.
- * ====================================================================
- *
- * This product includes cryptographic software written by Eric Young
- * (eay@cryptsoft.com).  This product includes software written by Tim
- * Hudson (tjh@cryptsoft.com).
- *
- */
-
-#include "pqueue.h"
-
-int
-main(void)
-	{
-	pitem *item;
-	pqueue pq;
-
-	pq = pqueue_new();
-
-	item = pitem_new(3, NULL);
-	pqueue_insert(pq, item);
-
-	item = pitem_new(1, NULL);
-	pqueue_insert(pq, item);
-
-	item = pitem_new(2, NULL);
-	pqueue_insert(pq, item);
-
-	item = pqueue_find(pq, 1);
-	fprintf(stderr, "found %ld\n", item->priority);
-
-	item = pqueue_find(pq, 2);
-	fprintf(stderr, "found %ld\n", item->priority);
-
-	item = pqueue_find(pq, 3);
-	fprintf(stderr, "found %ld\n", item ? item->priority: 0);
-
-	pqueue_print(pq);
-
-	for(item = pqueue_pop(pq); item != NULL; item = pqueue_pop(pq))
-		pitem_free(item);
-
-	pqueue_free(pq);
-	return 0;
-	}
diff --git a/crypto/openssl/crypto/pqueue/pqueue.c b/crypto/openssl/crypto/pqueue/pqueue.c
deleted file mode 100644
index 5cc18527f8da..000000000000
--- a/crypto/openssl/crypto/pqueue/pqueue.c
+++ /dev/null
@@ -1,236 +0,0 @@
-/* crypto/pqueue/pqueue.c */
-/* 
- * DTLS implementation written by Nagendra Modadugu
- * (nagendra@cs.stanford.edu) for the OpenSSL project 2005.  
- */
-/* ====================================================================
- * Copyright (c) 1999-2005 The OpenSSL Project.  All rights reserved.
- *
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions
- * are met:
- *
- * 1. Redistributions of source code must retain the above copyright
- *    notice, this list of conditions and the following disclaimer. 
- *
- * 2. Redistributions in binary form must reproduce the above copyright
- *    notice, this list of conditions and the following disclaimer in
- *    the documentation and/or other materials provided with the
- *    distribution.
- *
- * 3. All advertising materials mentioning features or use of this
- *    software must display the following acknowledgment:
- *    "This product includes software developed by the OpenSSL Project
- *    for use in the OpenSSL Toolkit. (http://www.OpenSSL.org/)"
- *
- * 4. The names "OpenSSL Toolkit" and "OpenSSL Project" must not be used to
- *    endorse or promote products derived from this software without
- *    prior written permission. For written permission, please contact
- *    openssl-core@OpenSSL.org.
- *
- * 5. Products derived from this software may not be called "OpenSSL"
- *    nor may "OpenSSL" appear in their names without prior written
- *    permission of the OpenSSL Project.
- *
- * 6. Redistributions of any form whatsoever must retain the following
- *    acknowledgment:
- *    "This product includes software developed by the OpenSSL Project
- *    for use in the OpenSSL Toolkit (http://www.OpenSSL.org/)"
- *
- * THIS SOFTWARE IS PROVIDED BY THE OpenSSL PROJECT ``AS IS'' AND ANY
- * EXPRESSED OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
- * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR
- * PURPOSE ARE DISCLAIMED.  IN NO EVENT SHALL THE OpenSSL PROJECT OR
- * ITS CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
- * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
- * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
- * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
- * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
- * STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
- * ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED
- * OF THE POSSIBILITY OF SUCH DAMAGE.
- * ====================================================================
- *
- * This product includes cryptographic software written by Eric Young
- * (eay@cryptsoft.com).  This product includes software written by Tim
- * Hudson (tjh@cryptsoft.com).
- *
- */
-
-#include "cryptlib.h"
-#include <openssl/bn.h>
-#include "pqueue.h"
-
-typedef struct _pqueue
-	{
-	pitem *items;
-	int count;
-	} pqueue_s;
-
-pitem *
-pitem_new(PQ_64BIT priority, void *data)
-	{
-	pitem *item = (pitem *) OPENSSL_malloc(sizeof(pitem));
-	if (item == NULL) return NULL;
-
-	pq_64bit_init(&(item->priority));
-	pq_64bit_assign(&item->priority, &priority);
-
-	item->data = data;
-	item->next = NULL;
-
-	return item;
-	}
-
-void
-pitem_free(pitem *item)
-	{
-	if (item == NULL) return;
-
-	pq_64bit_free(&(item->priority));
-	OPENSSL_free(item);
-	}
-
-pqueue_s *
-pqueue_new()
-	{
-	pqueue_s *pq = (pqueue_s *) OPENSSL_malloc(sizeof(pqueue_s));
-	if (pq == NULL) return NULL;
-
-	memset(pq, 0x00, sizeof(pqueue_s));
-	return pq;
-	}
-
-void
-pqueue_free(pqueue_s *pq)
-	{
-	if (pq == NULL) return;
-
-	OPENSSL_free(pq);
-	}
-
-pitem *
-pqueue_insert(pqueue_s *pq, pitem *item)
-	{
-	pitem *curr, *next;
-
-	if (pq->items == NULL)
-		{
-		pq->items = item;
-		return item;
-		}
-
-	for(curr = NULL, next = pq->items; 
-		next != NULL;
-		curr = next, next = next->next)
-		{
-		if (pq_64bit_gt(&(next->priority), &(item->priority)))
-			{
-			item->next = next;
-
-			if (curr == NULL) 
-				pq->items = item;
-			else  
-				curr->next = item;
-
-			return item;
-			}
-		/* duplicates not allowed */
-		if (pq_64bit_eq(&(item->priority), &(next->priority)))
-			return NULL;
-		}
-
-	item->next = NULL;
-	curr->next = item;
-
-	return item;
-	}
-
-pitem *
-pqueue_peek(pqueue_s *pq)
-	{
-	return pq->items;
-	}
-
-pitem *
-pqueue_pop(pqueue_s *pq)
-	{
-	pitem *item = pq->items;
-
-	if (pq->items != NULL)
-		pq->items = pq->items->next;
-
-	return item;
-	}
-
-pitem *
-pqueue_find(pqueue_s *pq, PQ_64BIT priority)
-	{
-	pitem *next, *prev = NULL;
-	pitem *found = NULL;
-
-	if ( pq->items == NULL)
-		return NULL;
-
-	for ( next = pq->items; next->next != NULL; 
-		  prev = next, next = next->next)
-		{
-		if ( pq_64bit_eq(&(next->priority), &priority))
-			{
-			found = next;
-			break;
-			}
-		}
-	
-	/* check the one last node */
-	if ( pq_64bit_eq(&(next->priority), &priority))
-		found = next;
-
-	if ( ! found)
-		return NULL;
-
-#if 0 /* find works in peek mode */
-	if ( prev == NULL)
-		pq->items = next->next;
-	else
-		prev->next = next->next;
-#endif
-
-	return found;
-	}
-
-#if PQ_64BIT_IS_INTEGER
-void
-pqueue_print(pqueue_s *pq)
-	{
-	pitem *item = pq->items;
-
-	while(item != NULL)
-		{
-		printf("item\t" PQ_64BIT_PRINT "\n", item->priority);
-		item = item->next;
-		}
-	}
-#endif
-
-pitem *
-pqueue_iterator(pqueue_s *pq)
-	{
-	return pqueue_peek(pq);
-	}
-
-pitem *
-pqueue_next(pitem **item)
-	{
-	pitem *ret;
-
-	if ( item == NULL || *item == NULL)
-		return NULL;
-
-
-	/* *item != NULL */
-	ret = *item;
-	*item = (*item)->next;
-
-	return ret;
-	}
diff --git a/crypto/openssl/crypto/pqueue/pqueue.h b/crypto/openssl/crypto/pqueue/pqueue.h
deleted file mode 100644
index 02386d130e9a..000000000000
--- a/crypto/openssl/crypto/pqueue/pqueue.h
+++ /dev/null
@@ -1,95 +0,0 @@
-/* crypto/pqueue/pqueue.h */
-/* 
- * DTLS implementation written by Nagendra Modadugu
- * (nagendra@cs.stanford.edu) for the OpenSSL project 2005.  
- */
-/* ====================================================================
- * Copyright (c) 1999-2005 The OpenSSL Project.  All rights reserved.
- *
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions
- * are met:
- *
- * 1. Redistributions of source code must retain the above copyright
- *    notice, this list of conditions and the following disclaimer. 
- *
- * 2. Redistributions in binary form must reproduce the above copyright
- *    notice, this list of conditions and the following disclaimer in
- *    the documentation and/or other materials provided with the
- *    distribution.
- *
- * 3. All advertising materials mentioning features or use of this
- *    software must display the following acknowledgment:
- *    "This product includes software developed by the OpenSSL Project
- *    for use in the OpenSSL Toolkit. (http://www.OpenSSL.org/)"
- *
- * 4. The names "OpenSSL Toolkit" and "OpenSSL Project" must not be used to
- *    endorse or promote products derived from this software without
- *    prior written permission. For written permission, please contact
- *    openssl-core@OpenSSL.org.
- *
- * 5. Products derived from this software may not be called "OpenSSL"
- *    nor may "OpenSSL" appear in their names without prior written
- *    permission of the OpenSSL Project.
- *
- * 6. Redistributions of any form whatsoever must retain the following
- *    acknowledgment:
- *    "This product includes software developed by the OpenSSL Project
- *    for use in the OpenSSL Toolkit (http://www.OpenSSL.org/)"
- *
- * THIS SOFTWARE IS PROVIDED BY THE OpenSSL PROJECT ``AS IS'' AND ANY
- * EXPRESSED OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
- * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR
- * PURPOSE ARE DISCLAIMED.  IN NO EVENT SHALL THE OpenSSL PROJECT OR
- * ITS CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
- * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
- * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
- * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
- * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
- * STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
- * ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED
- * OF THE POSSIBILITY OF SUCH DAMAGE.
- * ====================================================================
- *
- * This product includes cryptographic software written by Eric Young
- * (eay@cryptsoft.com).  This product includes software written by Tim
- * Hudson (tjh@cryptsoft.com).
- *
- */
-
-#ifndef HEADER_PQUEUE_H
-#define HEADER_PQUEUE_H
-
-#include <stdio.h>
-#include <stdlib.h>
-#include <string.h>
-
-#include <openssl/pq_compat.h>
-
-typedef struct _pqueue *pqueue;
-
-typedef struct _pitem
-	{
-	PQ_64BIT priority;
-	void *data;
-	struct _pitem *next;
-	} pitem;
-
-typedef struct _pitem *piterator;
-
-pitem *pitem_new(PQ_64BIT priority, void *data);
-void   pitem_free(pitem *item);
-
-pqueue pqueue_new(void);
-void   pqueue_free(pqueue pq);
-
-pitem *pqueue_insert(pqueue pq, pitem *item);
-pitem *pqueue_peek(pqueue pq);
-pitem *pqueue_pop(pqueue pq);
-pitem *pqueue_find(pqueue pq, PQ_64BIT priority);
-pitem *pqueue_iterator(pqueue pq);
-pitem *pqueue_next(piterator *iter);
-
-void   pqueue_print(pqueue pq);
-
-#endif /* ! HEADER_PQUEUE_H */
diff --git a/crypto/openssl/crypto/rand/Makefile b/crypto/openssl/crypto/rand/Makefile
deleted file mode 100644
index 3c1ab5bbaef3..000000000000
--- a/crypto/openssl/crypto/rand/Makefile
+++ /dev/null
@@ -1,159 +0,0 @@
-#
-# OpenSSL/crypto/rand/Makefile
-#
-
-DIR=	rand
-TOP=	../..
-CC=	cc
-INCLUDES=
-CFLAG=-g
-MAKEFILE=	Makefile
-AR=		ar r
-
-CFLAGS= $(INCLUDES) $(CFLAG)
-
-GENERAL=Makefile
-TEST= randtest.c
-APPS=
-
-LIB=$(TOP)/libcrypto.a
-LIBSRC=md_rand.c randfile.c rand_lib.c rand_err.c rand_egd.c \
-	rand_win.c rand_unix.c rand_os2.c rand_nw.c
-LIBOBJ=md_rand.o randfile.o rand_lib.o rand_err.o rand_egd.o \
-	rand_win.o rand_unix.o rand_os2.o rand_nw.o
-
-SRC= $(LIBSRC)
-
-EXHEADER= rand.h
-HEADER=	$(EXHEADER)
-
-ALL=    $(GENERAL) $(SRC) $(HEADER)
-
-top:
-	(cd ../..; $(MAKE) DIRS=crypto SDIRS=$(DIR) sub_all)
-
-all:	lib
-
-lib:	$(LIBOBJ)
-	$(AR) $(LIB) $(LIBOBJ)
-	$(RANLIB) $(LIB) || echo Never mind.
-	@touch lib
-
-files:
-	$(PERL) $(TOP)/util/files.pl Makefile >> $(TOP)/MINFO
-
-links:
-	@$(PERL) $(TOP)/util/mklink.pl ../../include/openssl $(EXHEADER)
-	@$(PERL) $(TOP)/util/mklink.pl ../../test $(TEST)
-	@$(PERL) $(TOP)/util/mklink.pl ../../apps $(APPS)
-
-install:
-	@[ -n "$(INSTALLTOP)" ] # should be set by top Makefile...
-	@headerlist="$(EXHEADER)"; for i in $$headerlist ; \
-	do  \
-	(cp $$i $(INSTALL_PREFIX)$(INSTALLTOP)/include/openssl/$$i; \
-	chmod 644 $(INSTALL_PREFIX)$(INSTALLTOP)/include/openssl/$$i ); \
-	done;
-
-tags:
-	ctags $(SRC)
-
-tests:
-
-lint:
-	lint -DLINT $(INCLUDES) $(SRC)>fluff
-
-depend:
-	@[ -n "$(MAKEDEPEND)" ] # should be set by upper Makefile...
-	$(MAKEDEPEND) -- $(CFLAG) $(INCLUDES) $(DEPFLAG) -- $(PROGS) $(LIBSRC)
-
-dclean:
-	$(PERL) -pe 'if (/^# DO NOT DELETE THIS LINE/) {print; exit(0);}' $(MAKEFILE) >Makefile.new
-	mv -f Makefile.new $(MAKEFILE)
-
-clean:
-	rm -f *.o *.obj lib tags core .pure .nfs* *.old *.bak fluff
-
-# DO NOT DELETE THIS LINE -- make depend depends on it.
-
-md_rand.o: ../../e_os.h ../../include/openssl/asn1.h
-md_rand.o: ../../include/openssl/bio.h ../../include/openssl/crypto.h
-md_rand.o: ../../include/openssl/e_os2.h ../../include/openssl/err.h
-md_rand.o: ../../include/openssl/evp.h ../../include/openssl/lhash.h
-md_rand.o: ../../include/openssl/obj_mac.h ../../include/openssl/objects.h
-md_rand.o: ../../include/openssl/opensslconf.h ../../include/openssl/opensslv.h
-md_rand.o: ../../include/openssl/ossl_typ.h ../../include/openssl/rand.h
-md_rand.o: ../../include/openssl/safestack.h ../../include/openssl/sha.h
-md_rand.o: ../../include/openssl/stack.h ../../include/openssl/symhacks.h
-md_rand.o: md_rand.c rand_lcl.h
-rand_egd.o: ../../include/openssl/buffer.h ../../include/openssl/e_os2.h
-rand_egd.o: ../../include/openssl/opensslconf.h
-rand_egd.o: ../../include/openssl/ossl_typ.h ../../include/openssl/rand.h
-rand_egd.o: rand_egd.c
-rand_err.o: ../../include/openssl/bio.h ../../include/openssl/crypto.h
-rand_err.o: ../../include/openssl/e_os2.h ../../include/openssl/err.h
-rand_err.o: ../../include/openssl/lhash.h ../../include/openssl/opensslconf.h
-rand_err.o: ../../include/openssl/opensslv.h ../../include/openssl/ossl_typ.h
-rand_err.o: ../../include/openssl/rand.h ../../include/openssl/safestack.h
-rand_err.o: ../../include/openssl/stack.h ../../include/openssl/symhacks.h
-rand_err.o: rand_err.c
-rand_lib.o: ../../e_os.h ../../include/openssl/bio.h
-rand_lib.o: ../../include/openssl/buffer.h ../../include/openssl/crypto.h
-rand_lib.o: ../../include/openssl/e_os2.h ../../include/openssl/engine.h
-rand_lib.o: ../../include/openssl/err.h ../../include/openssl/lhash.h
-rand_lib.o: ../../include/openssl/opensslconf.h
-rand_lib.o: ../../include/openssl/opensslv.h ../../include/openssl/ossl_typ.h
-rand_lib.o: ../../include/openssl/rand.h ../../include/openssl/safestack.h
-rand_lib.o: ../../include/openssl/stack.h ../../include/openssl/symhacks.h
-rand_lib.o: ../cryptlib.h rand_lib.c
-rand_nw.o: ../../e_os.h ../../include/openssl/asn1.h
-rand_nw.o: ../../include/openssl/bio.h ../../include/openssl/buffer.h
-rand_nw.o: ../../include/openssl/crypto.h ../../include/openssl/e_os2.h
-rand_nw.o: ../../include/openssl/err.h ../../include/openssl/evp.h
-rand_nw.o: ../../include/openssl/lhash.h ../../include/openssl/obj_mac.h
-rand_nw.o: ../../include/openssl/objects.h ../../include/openssl/opensslconf.h
-rand_nw.o: ../../include/openssl/opensslv.h ../../include/openssl/ossl_typ.h
-rand_nw.o: ../../include/openssl/rand.h ../../include/openssl/safestack.h
-rand_nw.o: ../../include/openssl/sha.h ../../include/openssl/stack.h
-rand_nw.o: ../../include/openssl/symhacks.h ../cryptlib.h rand_lcl.h rand_nw.c
-rand_os2.o: ../../e_os.h ../../include/openssl/asn1.h
-rand_os2.o: ../../include/openssl/bio.h ../../include/openssl/buffer.h
-rand_os2.o: ../../include/openssl/crypto.h ../../include/openssl/e_os2.h
-rand_os2.o: ../../include/openssl/err.h ../../include/openssl/evp.h
-rand_os2.o: ../../include/openssl/lhash.h ../../include/openssl/obj_mac.h
-rand_os2.o: ../../include/openssl/objects.h ../../include/openssl/opensslconf.h
-rand_os2.o: ../../include/openssl/opensslv.h ../../include/openssl/ossl_typ.h
-rand_os2.o: ../../include/openssl/rand.h ../../include/openssl/safestack.h
-rand_os2.o: ../../include/openssl/sha.h ../../include/openssl/stack.h
-rand_os2.o: ../../include/openssl/symhacks.h ../cryptlib.h rand_lcl.h
-rand_os2.o: rand_os2.c
-rand_unix.o: ../../e_os.h ../../include/openssl/asn1.h
-rand_unix.o: ../../include/openssl/bio.h ../../include/openssl/buffer.h
-rand_unix.o: ../../include/openssl/crypto.h ../../include/openssl/e_os2.h
-rand_unix.o: ../../include/openssl/err.h ../../include/openssl/evp.h
-rand_unix.o: ../../include/openssl/lhash.h ../../include/openssl/obj_mac.h
-rand_unix.o: ../../include/openssl/objects.h
-rand_unix.o: ../../include/openssl/opensslconf.h
-rand_unix.o: ../../include/openssl/opensslv.h ../../include/openssl/ossl_typ.h
-rand_unix.o: ../../include/openssl/rand.h ../../include/openssl/safestack.h
-rand_unix.o: ../../include/openssl/sha.h ../../include/openssl/stack.h
-rand_unix.o: ../../include/openssl/symhacks.h ../cryptlib.h rand_lcl.h
-rand_unix.o: rand_unix.c
-rand_win.o: ../../e_os.h ../../include/openssl/asn1.h
-rand_win.o: ../../include/openssl/bio.h ../../include/openssl/buffer.h
-rand_win.o: ../../include/openssl/crypto.h ../../include/openssl/e_os2.h
-rand_win.o: ../../include/openssl/err.h ../../include/openssl/evp.h
-rand_win.o: ../../include/openssl/lhash.h ../../include/openssl/obj_mac.h
-rand_win.o: ../../include/openssl/objects.h ../../include/openssl/opensslconf.h
-rand_win.o: ../../include/openssl/opensslv.h ../../include/openssl/ossl_typ.h
-rand_win.o: ../../include/openssl/rand.h ../../include/openssl/safestack.h
-rand_win.o: ../../include/openssl/sha.h ../../include/openssl/stack.h
-rand_win.o: ../../include/openssl/symhacks.h ../cryptlib.h rand_lcl.h
-rand_win.o: rand_win.c
-randfile.o: ../../e_os.h ../../include/openssl/buffer.h
-randfile.o: ../../include/openssl/crypto.h ../../include/openssl/e_os2.h
-randfile.o: ../../include/openssl/opensslconf.h
-randfile.o: ../../include/openssl/opensslv.h ../../include/openssl/ossl_typ.h
-randfile.o: ../../include/openssl/rand.h ../../include/openssl/safestack.h
-randfile.o: ../../include/openssl/stack.h ../../include/openssl/symhacks.h
-randfile.o: randfile.c
diff --git a/crypto/openssl/crypto/rand/md_rand.c b/crypto/openssl/crypto/rand/md_rand.c
deleted file mode 100644
index 9783d0c23e93..000000000000
--- a/crypto/openssl/crypto/rand/md_rand.c
+++ /dev/null
@@ -1,572 +0,0 @@
-/* crypto/rand/md_rand.c */
-/* Copyright (C) 1995-1998 Eric Young (eay@cryptsoft.com)
- * All rights reserved.
- *
- * This package is an SSL implementation written
- * by Eric Young (eay@cryptsoft.com).
- * The implementation was written so as to conform with Netscapes SSL.
- * 
- * This library is free for commercial and non-commercial use as long as
- * the following conditions are aheared to.  The following conditions
- * apply to all code found in this distribution, be it the RC4, RSA,
- * lhash, DES, etc., code; not just the SSL code.  The SSL documentation
- * included with this distribution is covered by the same copyright terms
- * except that the holder is Tim Hudson (tjh@cryptsoft.com).
- * 
- * Copyright remains Eric Young's, and as such any Copyright notices in
- * the code are not to be removed.
- * If this package is used in a product, Eric Young should be given attribution
- * as the author of the parts of the library used.
- * This can be in the form of a textual message at program startup or
- * in documentation (online or textual) provided with the package.
- * 
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions
- * are met:
- * 1. Redistributions of source code must retain the copyright
- *    notice, this list of conditions and the following disclaimer.
- * 2. Redistributions in binary form must reproduce the above copyright
- *    notice, this list of conditions and the following disclaimer in the
- *    documentation and/or other materials provided with the distribution.
- * 3. All advertising materials mentioning features or use of this software
- *    must display the following acknowledgement:
- *    "This product includes cryptographic software written by
- *     Eric Young (eay@cryptsoft.com)"
- *    The word 'cryptographic' can be left out if the rouines from the library
- *    being used are not cryptographic related :-).
- * 4. If you include any Windows specific code (or a derivative thereof) from 
- *    the apps directory (application code) you must include an acknowledgement:
- *    "This product includes software written by Tim Hudson (tjh@cryptsoft.com)"
- * 
- * THIS SOFTWARE IS PROVIDED BY ERIC YOUNG ``AS IS'' AND
- * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
- * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
- * ARE DISCLAIMED.  IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE
- * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
- * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
- * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
- * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
- * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
- * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
- * SUCH DAMAGE.
- * 
- * The licence and distribution terms for any publically available version or
- * derivative of this code cannot be changed.  i.e. this code cannot simply be
- * copied and put under another distribution licence
- * [including the GNU Public Licence.]
- */
-/* ====================================================================
- * Copyright (c) 1998-2001 The OpenSSL Project.  All rights reserved.
- *
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions
- * are met:
- *
- * 1. Redistributions of source code must retain the above copyright
- *    notice, this list of conditions and the following disclaimer. 
- *
- * 2. Redistributions in binary form must reproduce the above copyright
- *    notice, this list of conditions and the following disclaimer in
- *    the documentation and/or other materials provided with the
- *    distribution.
- *
- * 3. All advertising materials mentioning features or use of this
- *    software must display the following acknowledgment:
- *    "This product includes software developed by the OpenSSL Project
- *    for use in the OpenSSL Toolkit. (http://www.openssl.org/)"
- *
- * 4. The names "OpenSSL Toolkit" and "OpenSSL Project" must not be used to
- *    endorse or promote products derived from this software without
- *    prior written permission. For written permission, please contact
- *    openssl-core@openssl.org.
- *
- * 5. Products derived from this software may not be called "OpenSSL"
- *    nor may "OpenSSL" appear in their names without prior written
- *    permission of the OpenSSL Project.
- *
- * 6. Redistributions of any form whatsoever must retain the following
- *    acknowledgment:
- *    "This product includes software developed by the OpenSSL Project
- *    for use in the OpenSSL Toolkit (http://www.openssl.org/)"
- *
- * THIS SOFTWARE IS PROVIDED BY THE OpenSSL PROJECT ``AS IS'' AND ANY
- * EXPRESSED OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
- * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR
- * PURPOSE ARE DISCLAIMED.  IN NO EVENT SHALL THE OpenSSL PROJECT OR
- * ITS CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
- * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
- * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
- * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
- * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
- * STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
- * ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED
- * OF THE POSSIBILITY OF SUCH DAMAGE.
- * ====================================================================
- *
- * This product includes cryptographic software written by Eric Young
- * (eay@cryptsoft.com).  This product includes software written by Tim
- * Hudson (tjh@cryptsoft.com).
- *
- */
-
-#ifdef MD_RAND_DEBUG
-# ifndef NDEBUG
-#   define NDEBUG
-# endif
-#endif
-
-#include <assert.h>
-#include <stdio.h>
-#include <string.h>
-
-#include "e_os.h"
-
-#include <openssl/rand.h>
-#include "rand_lcl.h"
-
-#include <openssl/crypto.h>
-#include <openssl/err.h>
-
-#ifdef BN_DEBUG
-# define PREDICT
-#endif
-
-/* #define PREDICT	1 */
-
-#define STATE_SIZE	1023
-static int state_num=0,state_index=0;
-static unsigned char state[STATE_SIZE+MD_DIGEST_LENGTH];
-static unsigned char md[MD_DIGEST_LENGTH];
-static long md_count[2]={0,0};
-static double entropy=0;
-static int initialized=0;
-
-static unsigned int crypto_lock_rand = 0; /* may be set only when a thread
-                                           * holds CRYPTO_LOCK_RAND
-                                           * (to prevent double locking) */
-/* access to lockin_thread is synchronized by CRYPTO_LOCK_RAND2 */
-static unsigned long locking_thread = 0; /* valid iff crypto_lock_rand is set */
-
-
-#ifdef PREDICT
-int rand_predictable=0;
-#endif
-
-const char RAND_version[]="RAND" OPENSSL_VERSION_PTEXT;
-
-static void ssleay_rand_cleanup(void);
-static void ssleay_rand_seed(const void *buf, int num);
-static void ssleay_rand_add(const void *buf, int num, double add_entropy);
-static int ssleay_rand_bytes(unsigned char *buf, int num);
-static int ssleay_rand_pseudo_bytes(unsigned char *buf, int num);
-static int ssleay_rand_status(void);
-
-RAND_METHOD rand_ssleay_meth={
-	ssleay_rand_seed,
-	ssleay_rand_bytes,
-	ssleay_rand_cleanup,
-	ssleay_rand_add,
-	ssleay_rand_pseudo_bytes,
-	ssleay_rand_status
-	}; 
-
-RAND_METHOD *RAND_SSLeay(void)
-	{
-	return(&rand_ssleay_meth);
-	}
-
-static void ssleay_rand_cleanup(void)
-	{
-	OPENSSL_cleanse(state,sizeof(state));
-	state_num=0;
-	state_index=0;
-	OPENSSL_cleanse(md,MD_DIGEST_LENGTH);
-	md_count[0]=0;
-	md_count[1]=0;
-	entropy=0;
-	initialized=0;
-	}
-
-static void ssleay_rand_add(const void *buf, int num, double add)
-	{
-	int i,j,k,st_idx;
-	long md_c[2];
-	unsigned char local_md[MD_DIGEST_LENGTH];
-	EVP_MD_CTX m;
-	int do_not_lock;
-
-	/*
-	 * (Based on the rand(3) manpage)
-	 *
-	 * The input is chopped up into units of 20 bytes (or less for
-	 * the last block).  Each of these blocks is run through the hash
-	 * function as follows:  The data passed to the hash function
-	 * is the current 'md', the same number of bytes from the 'state'
-	 * (the location determined by in incremented looping index) as
-	 * the current 'block', the new key data 'block', and 'count'
-	 * (which is incremented after each use).
-	 * The result of this is kept in 'md' and also xored into the
-	 * 'state' at the same locations that were used as input into the
-         * hash function.
-	 */
-
-	/* check if we already have the lock */
-	if (crypto_lock_rand)
-		{
-		CRYPTO_r_lock(CRYPTO_LOCK_RAND2);
-		do_not_lock = (locking_thread == CRYPTO_thread_id());
-		CRYPTO_r_unlock(CRYPTO_LOCK_RAND2);
-		}
-	else
-		do_not_lock = 0;
-
-	if (!do_not_lock) CRYPTO_w_lock(CRYPTO_LOCK_RAND);
-	st_idx=state_index;
-
-	/* use our own copies of the counters so that even
-	 * if a concurrent thread seeds with exactly the
-	 * same data and uses the same subarray there's _some_
-	 * difference */
-	md_c[0] = md_count[0];
-	md_c[1] = md_count[1];
-
-	memcpy(local_md, md, sizeof md);
-
-	/* state_index <= state_num <= STATE_SIZE */
-	state_index += num;
-	if (state_index >= STATE_SIZE)
-		{
-		state_index%=STATE_SIZE;
-		state_num=STATE_SIZE;
-		}
-	else if (state_num < STATE_SIZE)	
-		{
-		if (state_index > state_num)
-			state_num=state_index;
-		}
-	/* state_index <= state_num <= STATE_SIZE */
-
-	/* state[st_idx], ..., state[(st_idx + num - 1) % STATE_SIZE]
-	 * are what we will use now, but other threads may use them
-	 * as well */
-
-	md_count[1] += (num / MD_DIGEST_LENGTH) + (num % MD_DIGEST_LENGTH > 0);
-
-	if (!do_not_lock) CRYPTO_w_unlock(CRYPTO_LOCK_RAND);
-
-	EVP_MD_CTX_init(&m);
-	for (i=0; i<num; i+=MD_DIGEST_LENGTH)
-		{
-		j=(num-i);
-		j=(j > MD_DIGEST_LENGTH)?MD_DIGEST_LENGTH:j;
-
-		MD_Init(&m);
-		MD_Update(&m,local_md,MD_DIGEST_LENGTH);
-		k=(st_idx+j)-STATE_SIZE;
-		if (k > 0)
-			{
-			MD_Update(&m,&(state[st_idx]),j-k);
-			MD_Update(&m,&(state[0]),k);
-			}
-		else
-			MD_Update(&m,&(state[st_idx]),j);
-			
-		MD_Update(&m,buf,j);
-		MD_Update(&m,(unsigned char *)&(md_c[0]),sizeof(md_c));
-		MD_Final(&m,local_md);
-		md_c[1]++;
-
-		buf=(const char *)buf + j;
-
-		for (k=0; k<j; k++)
-			{
-			/* Parallel threads may interfere with this,
-			 * but always each byte of the new state is
-			 * the XOR of some previous value of its
-			 * and local_md (itermediate values may be lost).
-			 * Alway using locking could hurt performance more
-			 * than necessary given that conflicts occur only
-			 * when the total seeding is longer than the random
-			 * state. */
-			state[st_idx++]^=local_md[k];
-			if (st_idx >= STATE_SIZE)
-				st_idx=0;
-			}
-		}
-	EVP_MD_CTX_cleanup(&m);
-
-	if (!do_not_lock) CRYPTO_w_lock(CRYPTO_LOCK_RAND);
-	/* Don't just copy back local_md into md -- this could mean that
-	 * other thread's seeding remains without effect (except for
-	 * the incremented counter).  By XORing it we keep at least as
-	 * much entropy as fits into md. */
-	for (k = 0; k < (int)sizeof(md); k++)
-		{
-		md[k] ^= local_md[k];
-		}
-	if (entropy < ENTROPY_NEEDED) /* stop counting when we have enough */
-	    entropy += add;
-	if (!do_not_lock) CRYPTO_w_unlock(CRYPTO_LOCK_RAND);
-	
-#if !defined(OPENSSL_THREADS) && !defined(OPENSSL_SYS_WIN32)
-	assert(md_c[1] == md_count[1]);
-#endif
-	}
-
-static void ssleay_rand_seed(const void *buf, int num)
-	{
-	ssleay_rand_add(buf, num, (double)num);
-	}
-
-static int ssleay_rand_bytes(unsigned char *buf, int num)
-	{
-	static volatile int stirred_pool = 0;
-	int i,j,k,st_num,st_idx;
-	int num_ceil;
-	int ok;
-	long md_c[2];
-	unsigned char local_md[MD_DIGEST_LENGTH];
-	EVP_MD_CTX m;
-#ifndef GETPID_IS_MEANINGLESS
-	pid_t curr_pid = getpid();
-#endif
-	int do_stir_pool = 0;
-
-#ifdef PREDICT
-	if (rand_predictable)
-		{
-		static unsigned char val=0;
-
-		for (i=0; i<num; i++)
-			buf[i]=val++;
-		return(1);
-		}
-#endif
-
-	if (num <= 0)
-		return 1;
-
-	EVP_MD_CTX_init(&m);
-	/* round upwards to multiple of MD_DIGEST_LENGTH/2 */
-	num_ceil = (1 + (num-1)/(MD_DIGEST_LENGTH/2)) * (MD_DIGEST_LENGTH/2);
-
-	/*
-	 * (Based on the rand(3) manpage:)
-	 *
-	 * For each group of 10 bytes (or less), we do the following:
-	 *
-	 * Input into the hash function the local 'md' (which is initialized from
-	 * the global 'md' before any bytes are generated), the bytes that are to
-	 * be overwritten by the random bytes, and bytes from the 'state'
-	 * (incrementing looping index). From this digest output (which is kept
-	 * in 'md'), the top (up to) 10 bytes are returned to the caller and the
-	 * bottom 10 bytes are xored into the 'state'.
-	 * 
-	 * Finally, after we have finished 'num' random bytes for the
-	 * caller, 'count' (which is incremented) and the local and global 'md'
-	 * are fed into the hash function and the results are kept in the
-	 * global 'md'.
-	 */
-
-	CRYPTO_w_lock(CRYPTO_LOCK_RAND);
-
-	/* prevent ssleay_rand_bytes() from trying to obtain the lock again */
-	CRYPTO_w_lock(CRYPTO_LOCK_RAND2);
-	locking_thread = CRYPTO_thread_id();
-	CRYPTO_w_unlock(CRYPTO_LOCK_RAND2);
-	crypto_lock_rand = 1;
-
-	if (!initialized)
-		{
-		RAND_poll();
-		initialized = 1;
-		}
-	
-	if (!stirred_pool)
-		do_stir_pool = 1;
-	
-	ok = (entropy >= ENTROPY_NEEDED);
-	if (!ok)
-		{
-		/* If the PRNG state is not yet unpredictable, then seeing
-		 * the PRNG output may help attackers to determine the new
-		 * state; thus we have to decrease the entropy estimate.
-		 * Once we've had enough initial seeding we don't bother to
-		 * adjust the entropy count, though, because we're not ambitious
-		 * to provide *information-theoretic* randomness.
-		 *
-		 * NOTE: This approach fails if the program forks before
-		 * we have enough entropy. Entropy should be collected
-		 * in a separate input pool and be transferred to the
-		 * output pool only when the entropy limit has been reached.
-		 */
-		entropy -= num;
-		if (entropy < 0)
-			entropy = 0;
-		}
-
-	if (do_stir_pool)
-		{
-		/* In the output function only half of 'md' remains secret,
-		 * so we better make sure that the required entropy gets
-		 * 'evenly distributed' through 'state', our randomness pool.
-		 * The input function (ssleay_rand_add) chains all of 'md',
-		 * which makes it more suitable for this purpose.
-		 */
-
-		int n = STATE_SIZE; /* so that the complete pool gets accessed */
-		while (n > 0)
-			{
-#if MD_DIGEST_LENGTH > 20
-# error "Please adjust DUMMY_SEED."
-#endif
-#define DUMMY_SEED "...................." /* at least MD_DIGEST_LENGTH */
-			/* Note that the seed does not matter, it's just that
-			 * ssleay_rand_add expects to have something to hash. */
-			ssleay_rand_add(DUMMY_SEED, MD_DIGEST_LENGTH, 0.0);
-			n -= MD_DIGEST_LENGTH;
-			}
-		if (ok)
-			stirred_pool = 1;
-		}
-
-	st_idx=state_index;
-	st_num=state_num;
-	md_c[0] = md_count[0];
-	md_c[1] = md_count[1];
-	memcpy(local_md, md, sizeof md);
-
-	state_index+=num_ceil;
-	if (state_index > state_num)
-		state_index %= state_num;
-
-	/* state[st_idx], ..., state[(st_idx + num_ceil - 1) % st_num]
-	 * are now ours (but other threads may use them too) */
-
-	md_count[0] += 1;
-
-	/* before unlocking, we must clear 'crypto_lock_rand' */
-	crypto_lock_rand = 0;
-	CRYPTO_w_unlock(CRYPTO_LOCK_RAND);
-
-	while (num > 0)
-		{
-		/* num_ceil -= MD_DIGEST_LENGTH/2 */
-		j=(num >= MD_DIGEST_LENGTH/2)?MD_DIGEST_LENGTH/2:num;
-		num-=j;
-		MD_Init(&m);
-#ifndef GETPID_IS_MEANINGLESS
-		if (curr_pid) /* just in the first iteration to save time */
-			{
-			MD_Update(&m,(unsigned char*)&curr_pid,sizeof curr_pid);
-			curr_pid = 0;
-			}
-#endif
-		MD_Update(&m,local_md,MD_DIGEST_LENGTH);
-		MD_Update(&m,(unsigned char *)&(md_c[0]),sizeof(md_c));
-#ifndef PURIFY
-		MD_Update(&m,buf,j); /* purify complains */
-#endif
-		k=(st_idx+MD_DIGEST_LENGTH/2)-st_num;
-		if (k > 0)
-			{
-			MD_Update(&m,&(state[st_idx]),MD_DIGEST_LENGTH/2-k);
-			MD_Update(&m,&(state[0]),k);
-			}
-		else
-			MD_Update(&m,&(state[st_idx]),MD_DIGEST_LENGTH/2);
-		MD_Final(&m,local_md);
-
-		for (i=0; i<MD_DIGEST_LENGTH/2; i++)
-			{
-			state[st_idx++]^=local_md[i]; /* may compete with other threads */
-			if (st_idx >= st_num)
-				st_idx=0;
-			if (i < j)
-				*(buf++)=local_md[i+MD_DIGEST_LENGTH/2];
-			}
-		}
-
-	MD_Init(&m);
-	MD_Update(&m,(unsigned char *)&(md_c[0]),sizeof(md_c));
-	MD_Update(&m,local_md,MD_DIGEST_LENGTH);
-	CRYPTO_w_lock(CRYPTO_LOCK_RAND);
-	MD_Update(&m,md,MD_DIGEST_LENGTH);
-	MD_Final(&m,md);
-	CRYPTO_w_unlock(CRYPTO_LOCK_RAND);
-
-	EVP_MD_CTX_cleanup(&m);
-	if (ok)
-		return(1);
-	else
-		{
-		RANDerr(RAND_F_SSLEAY_RAND_BYTES,RAND_R_PRNG_NOT_SEEDED);
-		ERR_add_error_data(1, "You need to read the OpenSSL FAQ, "
-			"http://www.openssl.org/support/faq.html");
-		return(0);
-		}
-	}
-
-/* pseudo-random bytes that are guaranteed to be unique but not
-   unpredictable */
-static int ssleay_rand_pseudo_bytes(unsigned char *buf, int num) 
-	{
-	int ret;
-	unsigned long err;
-
-	ret = RAND_bytes(buf, num);
-	if (ret == 0)
-		{
-		err = ERR_peek_error();
-		if (ERR_GET_LIB(err) == ERR_LIB_RAND &&
-		    ERR_GET_REASON(err) == RAND_R_PRNG_NOT_SEEDED)
-			ERR_clear_error();
-		}
-	return (ret);
-	}
-
-static int ssleay_rand_status(void)
-	{
-	int ret;
-	int do_not_lock;
-
-	/* check if we already have the lock
-	 * (could happen if a RAND_poll() implementation calls RAND_status()) */
-	if (crypto_lock_rand)
-		{
-		CRYPTO_r_lock(CRYPTO_LOCK_RAND2);
-		do_not_lock = (locking_thread == CRYPTO_thread_id());
-		CRYPTO_r_unlock(CRYPTO_LOCK_RAND2);
-		}
-	else
-		do_not_lock = 0;
-	
-	if (!do_not_lock)
-		{
-		CRYPTO_w_lock(CRYPTO_LOCK_RAND);
-		
-		/* prevent ssleay_rand_bytes() from trying to obtain the lock again */
-		CRYPTO_w_lock(CRYPTO_LOCK_RAND2);
-		locking_thread = CRYPTO_thread_id();
-		CRYPTO_w_unlock(CRYPTO_LOCK_RAND2);
-		crypto_lock_rand = 1;
-		}
-	
-	if (!initialized)
-		{
-		RAND_poll();
-		initialized = 1;
-		}
-
-	ret = entropy >= ENTROPY_NEEDED;
-
-	if (!do_not_lock)
-		{
-		/* before unlocking, we must clear 'crypto_lock_rand' */
-		crypto_lock_rand = 0;
-		
-		CRYPTO_w_unlock(CRYPTO_LOCK_RAND);
-		}
-	
-	return ret;
-	}
diff --git a/crypto/openssl/crypto/rand/rand.h b/crypto/openssl/crypto/rand/rand.h
deleted file mode 100644
index ac6c0217636f..000000000000
--- a/crypto/openssl/crypto/rand/rand.h
+++ /dev/null
@@ -1,140 +0,0 @@
-/* crypto/rand/rand.h */
-/* Copyright (C) 1995-1998 Eric Young (eay@cryptsoft.com)
- * All rights reserved.
- *
- * This package is an SSL implementation written
- * by Eric Young (eay@cryptsoft.com).
- * The implementation was written so as to conform with Netscapes SSL.
- * 
- * This library is free for commercial and non-commercial use as long as
- * the following conditions are aheared to.  The following conditions
- * apply to all code found in this distribution, be it the RC4, RSA,
- * lhash, DES, etc., code; not just the SSL code.  The SSL documentation
- * included with this distribution is covered by the same copyright terms
- * except that the holder is Tim Hudson (tjh@cryptsoft.com).
- * 
- * Copyright remains Eric Young's, and as such any Copyright notices in
- * the code are not to be removed.
- * If this package is used in a product, Eric Young should be given attribution
- * as the author of the parts of the library used.
- * This can be in the form of a textual message at program startup or
- * in documentation (online or textual) provided with the package.
- * 
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions
- * are met:
- * 1. Redistributions of source code must retain the copyright
- *    notice, this list of conditions and the following disclaimer.
- * 2. Redistributions in binary form must reproduce the above copyright
- *    notice, this list of conditions and the following disclaimer in the
- *    documentation and/or other materials provided with the distribution.
- * 3. All advertising materials mentioning features or use of this software
- *    must display the following acknowledgement:
- *    "This product includes cryptographic software written by
- *     Eric Young (eay@cryptsoft.com)"
- *    The word 'cryptographic' can be left out if the rouines from the library
- *    being used are not cryptographic related :-).
- * 4. If you include any Windows specific code (or a derivative thereof) from 
- *    the apps directory (application code) you must include an acknowledgement:
- *    "This product includes software written by Tim Hudson (tjh@cryptsoft.com)"
- * 
- * THIS SOFTWARE IS PROVIDED BY ERIC YOUNG ``AS IS'' AND
- * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
- * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
- * ARE DISCLAIMED.  IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE
- * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
- * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
- * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
- * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
- * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
- * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
- * SUCH DAMAGE.
- * 
- * The licence and distribution terms for any publically available version or
- * derivative of this code cannot be changed.  i.e. this code cannot simply be
- * copied and put under another distribution licence
- * [including the GNU Public Licence.]
- */
-
-#ifndef HEADER_RAND_H
-#define HEADER_RAND_H
-
-#include <stdlib.h>
-#include <openssl/ossl_typ.h>
-#include <openssl/e_os2.h>
-
-#if defined(OPENSSL_SYS_WINDOWS)
-#include <windows.h>
-#endif
-
-#ifdef  __cplusplus
-extern "C" {
-#endif
-
-#if defined(OPENSSL_FIPS)
-#define FIPS_RAND_SIZE_T size_t
-#endif
-
-/* Already defined in ossl_typ.h */
-/* typedef struct rand_meth_st RAND_METHOD; */
-
-struct rand_meth_st
-	{
-	void (*seed)(const void *buf, int num);
-	int (*bytes)(unsigned char *buf, int num);
-	void (*cleanup)(void);
-	void (*add)(const void *buf, int num, double entropy);
-	int (*pseudorand)(unsigned char *buf, int num);
-	int (*status)(void);
-	};
-
-#ifdef BN_DEBUG
-extern int rand_predictable;
-#endif
-
-int RAND_set_rand_method(const RAND_METHOD *meth);
-const RAND_METHOD *RAND_get_rand_method(void);
-#ifndef OPENSSL_NO_ENGINE
-int RAND_set_rand_engine(ENGINE *engine);
-#endif
-RAND_METHOD *RAND_SSLeay(void);
-void RAND_cleanup(void );
-int  RAND_bytes(unsigned char *buf,int num);
-int  RAND_pseudo_bytes(unsigned char *buf,int num);
-void RAND_seed(const void *buf,int num);
-void RAND_add(const void *buf,int num,double entropy);
-int  RAND_load_file(const char *file,long max_bytes);
-int  RAND_write_file(const char *file);
-const char *RAND_file_name(char *file,size_t num);
-int RAND_status(void);
-int RAND_query_egd_bytes(const char *path, unsigned char *buf, int bytes);
-int RAND_egd(const char *path);
-int RAND_egd_bytes(const char *path,int bytes);
-int RAND_poll(void);
-
-#if defined(OPENSSL_SYS_WINDOWS) || defined(OPENSSL_SYS_WIN32)
-
-void RAND_screen(void);
-int RAND_event(UINT, WPARAM, LPARAM);
-
-#endif
-
-/* BEGIN ERROR CODES */
-/* The following lines are auto generated by the script mkerr.pl. Any changes
- * made after this point may be overwritten when the script is next run.
- */
-void ERR_load_RAND_strings(void);
-
-/* Error codes for the RAND functions. */
-
-/* Function codes. */
-#define RAND_F_RAND_GET_RAND_METHOD			 101
-#define RAND_F_SSLEAY_RAND_BYTES			 100
-
-/* Reason codes. */
-#define RAND_R_PRNG_NOT_SEEDED				 100
-
-#ifdef  __cplusplus
-}
-#endif
-#endif
diff --git a/crypto/openssl/crypto/rand/rand_egd.c b/crypto/openssl/crypto/rand/rand_egd.c
deleted file mode 100644
index 50bce6cabae8..000000000000
--- a/crypto/openssl/crypto/rand/rand_egd.c
+++ /dev/null
@@ -1,303 +0,0 @@
-/* crypto/rand/rand_egd.c */
-/* Written by Ulf Moeller and Lutz Jaenicke for the OpenSSL project. */
-/* ====================================================================
- * Copyright (c) 1998-2000 The OpenSSL Project.  All rights reserved.
- *
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions
- * are met:
- *
- * 1. Redistributions of source code must retain the above copyright
- *    notice, this list of conditions and the following disclaimer. 
- *
- * 2. Redistributions in binary form must reproduce the above copyright
- *    notice, this list of conditions and the following disclaimer in
- *    the documentation and/or other materials provided with the
- *    distribution.
- *
- * 3. All advertising materials mentioning features or use of this
- *    software must display the following acknowledgment:
- *    "This product includes software developed by the OpenSSL Project
- *    for use in the OpenSSL Toolkit. (http://www.openssl.org/)"
- *
- * 4. The names "OpenSSL Toolkit" and "OpenSSL Project" must not be used to
- *    endorse or promote products derived from this software without
- *    prior written permission. For written permission, please contact
- *    openssl-core@openssl.org.
- *
- * 5. Products derived from this software may not be called "OpenSSL"
- *    nor may "OpenSSL" appear in their names without prior written
- *    permission of the OpenSSL Project.
- *
- * 6. Redistributions of any form whatsoever must retain the following
- *    acknowledgment:
- *    "This product includes software developed by the OpenSSL Project
- *    for use in the OpenSSL Toolkit (http://www.openssl.org/)"
- *
- * THIS SOFTWARE IS PROVIDED BY THE OpenSSL PROJECT ``AS IS'' AND ANY
- * EXPRESSED OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
- * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR
- * PURPOSE ARE DISCLAIMED.  IN NO EVENT SHALL THE OpenSSL PROJECT OR
- * ITS CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
- * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
- * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
- * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
- * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
- * STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
- * ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED
- * OF THE POSSIBILITY OF SUCH DAMAGE.
- * ====================================================================
- *
- * This product includes cryptographic software written by Eric Young
- * (eay@cryptsoft.com).  This product includes software written by Tim
- * Hudson (tjh@cryptsoft.com).
- *
- */
-
-#include <openssl/e_os2.h>
-#include <openssl/rand.h>
-#include <openssl/buffer.h>
-
-/*
- * Query the EGD <URL: http://www.lothar.com/tech/crypto/>.
- *
- * This module supplies three routines:
- *
- * RAND_query_egd_bytes(path, buf, bytes)
- *   will actually query "bytes" bytes of entropy form the egd-socket located
- *   at path and will write them to buf (if supplied) or will directly feed
- *   it to RAND_seed() if buf==NULL.
- *   The number of bytes is not limited by the maximum chunk size of EGD,
- *   which is 255 bytes. If more than 255 bytes are wanted, several chunks
- *   of entropy bytes are requested. The connection is left open until the
- *   query is competed.
- *   RAND_query_egd_bytes() returns with
- *     -1  if an error occured during connection or communication.
- *     num the number of bytes read from the EGD socket. This number is either
- *         the number of bytes requested or smaller, if the EGD pool is
- *         drained and the daemon signals that the pool is empty.
- *   This routine does not touch any RAND_status(). This is necessary, since
- *   PRNG functions may call it during initialization.
- *
- * RAND_egd_bytes(path, bytes) will query "bytes" bytes and have them
- *   used to seed the PRNG.
- *   RAND_egd_bytes() is a wrapper for RAND_query_egd_bytes() with buf=NULL.
- *   Unlike RAND_query_egd_bytes(), RAND_status() is used to test the
- *   seed status so that the return value can reflect the seed state:
- *     -1  if an error occured during connection or communication _or_
- *         if the PRNG has still not received the required seeding.
- *     num the number of bytes read from the EGD socket. This number is either
- *         the number of bytes requested or smaller, if the EGD pool is
- *         drained and the daemon signals that the pool is empty.
- *
- * RAND_egd(path) will query 255 bytes and use the bytes retreived to seed
- *   the PRNG.
- *   RAND_egd() is a wrapper for RAND_egd_bytes() with numbytes=255.
- */
-
-#if defined(OPENSSL_SYS_WIN32) || defined(OPENSSL_SYS_VMS) || defined(OPENSSL_SYS_MSDOS) || defined(OPENSSL_SYS_VXWORKS) || defined(OPENSSL_SYS_NETWARE) || defined(OPENSSL_SYS_VOS)
-int RAND_query_egd_bytes(const char *path, unsigned char *buf, int bytes)
-	{
-	return(-1);
-	}
-int RAND_egd(const char *path)
-	{
-	return(-1);
-	}
-
-int RAND_egd_bytes(const char *path,int bytes)
-	{
-	return(-1);
-	}
-#else
-#include <openssl/opensslconf.h>
-#include OPENSSL_UNISTD
-#include <sys/types.h>
-#include <sys/socket.h>
-#ifndef NO_SYS_UN_H
-# ifdef OPENSSL_SYS_VXWORKS
-#   include <streams/un.h>
-# else
-#   include <sys/un.h>
-# endif
-#else
-struct	sockaddr_un {
-	short	sun_family;		/* AF_UNIX */
-	char	sun_path[108];		/* path name (gag) */
-};
-#endif /* NO_SYS_UN_H */
-#include <string.h>
-#include <errno.h>
-
-#ifndef offsetof
-#  define offsetof(TYPE, MEMBER) ((size_t) &((TYPE *)0)->MEMBER)
-#endif
-
-int RAND_query_egd_bytes(const char *path, unsigned char *buf, int bytes)
-	{
-	int ret = 0;
-	struct sockaddr_un addr;
-	int len, num, numbytes;
-	int fd = -1;
-	int success;
-	unsigned char egdbuf[2], tempbuf[255], *retrievebuf;
-
-	memset(&addr, 0, sizeof(addr));
-	addr.sun_family = AF_UNIX;
-	if (strlen(path) >= sizeof(addr.sun_path))
-		return (-1);
-	BUF_strlcpy(addr.sun_path,path,sizeof addr.sun_path);
-	len = offsetof(struct sockaddr_un, sun_path) + strlen(path);
-	fd = socket(AF_UNIX, SOCK_STREAM, 0);
-	if (fd == -1) return (-1);
-	success = 0;
-	while (!success)
-	    {
-	    if (connect(fd, (struct sockaddr *)&addr, len) == 0)
-	       success = 1;
-	    else
-		{
-		switch (errno)
-		    {
-#ifdef EINTR
-		    case EINTR:
-#endif
-#ifdef EAGAIN
-		    case EAGAIN:
-#endif
-#ifdef EINPROGRESS
-		    case EINPROGRESS:
-#endif
-#ifdef EALREADY
-		    case EALREADY:
-#endif
-			/* No error, try again */
-			break;
-#ifdef EISCONN
-		    case EISCONN:
-			success = 1;
-			break;
-#endif
-		    default:
-			goto err;	/* failure */
-		    }
-		}
-	    }
-
-	while(bytes > 0)
-	    {
-	    egdbuf[0] = 1;
-	    egdbuf[1] = bytes < 255 ? bytes : 255;
-	    numbytes = 0;
-	    while (numbytes != 2)
-		{
-	        num = write(fd, egdbuf + numbytes, 2 - numbytes);
-	        if (num >= 0)
-		    numbytes += num;
-	    	else
-		    {
-		    switch (errno)
-		    	{
-#ifdef EINTR
-		    	case EINTR:
-#endif
-#ifdef EAGAIN
-		    	case EAGAIN:
-#endif
-			    /* No error, try again */
-			    break;
-		    	default:
-			    ret = -1;
-			    goto err;	/* failure */
-			}
-		    }
-		}
-	    numbytes = 0;
-	    while (numbytes != 1)
-		{
-	        num = read(fd, egdbuf, 1);
-	        if (num == 0)
-			goto err;	/* descriptor closed */
-		else if (num > 0)
-		    numbytes += num;
-	    	else
-		    {
-		    switch (errno)
-		    	{
-#ifdef EINTR
-		    	case EINTR:
-#endif
-#ifdef EAGAIN
-		    	case EAGAIN:
-#endif
-			    /* No error, try again */
-			    break;
-		    	default:
-			    ret = -1;
-			    goto err;	/* failure */
-			}
-		    }
-		}
-	    if(egdbuf[0] == 0)
-		goto err;
-	    if (buf)
-		retrievebuf = buf + ret;
-	    else
-		retrievebuf = tempbuf;
-	    numbytes = 0;
-	    while (numbytes != egdbuf[0])
-		{
-	        num = read(fd, retrievebuf + numbytes, egdbuf[0] - numbytes);
-		if (num == 0)
-			goto err;	/* descriptor closed */
-	        else if (num > 0)
-		    numbytes += num;
-	    	else
-		    {
-		    switch (errno)
-		    	{
-#ifdef EINTR
-		    	case EINTR:
-#endif
-#ifdef EAGAIN
-		    	case EAGAIN:
-#endif
-			    /* No error, try again */
-			    break;
-		    	default:
-			    ret = -1;
-			    goto err;	/* failure */
-			}
-		    }
-		}
-	    ret += egdbuf[0];
-	    bytes -= egdbuf[0];
-	    if (!buf)
-		RAND_seed(tempbuf, egdbuf[0]);
-	    }
- err:
-	if (fd != -1) close(fd);
-	return(ret);
-	}
-
-
-int RAND_egd_bytes(const char *path, int bytes)
-	{
-	int num, ret = 0;
-
-	num = RAND_query_egd_bytes(path, NULL, bytes);
-	if (num < 1) goto err;
-	if (RAND_status() == 1)
-	    ret = num;
- err:
-	return(ret);
-	}
-
-
-int RAND_egd(const char *path)
-	{
-	return (RAND_egd_bytes(path, 255));
-	}
-
-
-#endif
diff --git a/crypto/openssl/crypto/rand/rand_err.c b/crypto/openssl/crypto/rand/rand_err.c
deleted file mode 100644
index 386934dcd186..000000000000
--- a/crypto/openssl/crypto/rand/rand_err.c
+++ /dev/null
@@ -1,96 +0,0 @@
-/* crypto/rand/rand_err.c */
-/* ====================================================================
- * Copyright (c) 1999-2005 The OpenSSL Project.  All rights reserved.
- *
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions
- * are met:
- *
- * 1. Redistributions of source code must retain the above copyright
- *    notice, this list of conditions and the following disclaimer. 
- *
- * 2. Redistributions in binary form must reproduce the above copyright
- *    notice, this list of conditions and the following disclaimer in
- *    the documentation and/or other materials provided with the
- *    distribution.
- *
- * 3. All advertising materials mentioning features or use of this
- *    software must display the following acknowledgment:
- *    "This product includes software developed by the OpenSSL Project
- *    for use in the OpenSSL Toolkit. (http://www.OpenSSL.org/)"
- *
- * 4. The names "OpenSSL Toolkit" and "OpenSSL Project" must not be used to
- *    endorse or promote products derived from this software without
- *    prior written permission. For written permission, please contact
- *    openssl-core@OpenSSL.org.
- *
- * 5. Products derived from this software may not be called "OpenSSL"
- *    nor may "OpenSSL" appear in their names without prior written
- *    permission of the OpenSSL Project.
- *
- * 6. Redistributions of any form whatsoever must retain the following
- *    acknowledgment:
- *    "This product includes software developed by the OpenSSL Project
- *    for use in the OpenSSL Toolkit (http://www.OpenSSL.org/)"
- *
- * THIS SOFTWARE IS PROVIDED BY THE OpenSSL PROJECT ``AS IS'' AND ANY
- * EXPRESSED OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
- * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR
- * PURPOSE ARE DISCLAIMED.  IN NO EVENT SHALL THE OpenSSL PROJECT OR
- * ITS CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
- * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
- * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
- * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
- * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
- * STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
- * ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED
- * OF THE POSSIBILITY OF SUCH DAMAGE.
- * ====================================================================
- *
- * This product includes cryptographic software written by Eric Young
- * (eay@cryptsoft.com).  This product includes software written by Tim
- * Hudson (tjh@cryptsoft.com).
- *
- */
-
-/* NOTE: this file was auto generated by the mkerr.pl script: any changes
- * made to it will be overwritten when the script next updates this file,
- * only reason strings will be preserved.
- */
-
-#include <stdio.h>
-#include <openssl/err.h>
-#include <openssl/rand.h>
-
-/* BEGIN ERROR CODES */
-#ifndef OPENSSL_NO_ERR
-
-#define ERR_FUNC(func) ERR_PACK(ERR_LIB_RAND,func,0)
-#define ERR_REASON(reason) ERR_PACK(ERR_LIB_RAND,0,reason)
-
-static ERR_STRING_DATA RAND_str_functs[]=
-	{
-{ERR_FUNC(RAND_F_RAND_GET_RAND_METHOD),	"RAND_get_rand_method"},
-{ERR_FUNC(RAND_F_SSLEAY_RAND_BYTES),	"SSLEAY_RAND_BYTES"},
-{0,NULL}
-	};
-
-static ERR_STRING_DATA RAND_str_reasons[]=
-	{
-{ERR_REASON(RAND_R_PRNG_NOT_SEEDED)      ,"PRNG not seeded"},
-{0,NULL}
-	};
-
-#endif
-
-void ERR_load_RAND_strings(void)
-	{
-#ifndef OPENSSL_NO_ERR
-
-	if (ERR_func_error_string(RAND_str_functs[0].error) == NULL)
-		{
-		ERR_load_strings(0,RAND_str_functs);
-		ERR_load_strings(0,RAND_str_reasons);
-		}
-#endif
-	}
diff --git a/crypto/openssl/crypto/rand/rand_lcl.h b/crypto/openssl/crypto/rand/rand_lcl.h
deleted file mode 100755
index 618a8ec899ce..000000000000
--- a/crypto/openssl/crypto/rand/rand_lcl.h
+++ /dev/null
@@ -1,158 +0,0 @@
-/* crypto/rand/rand_lcl.h */
-/* Copyright (C) 1995-1998 Eric Young (eay@cryptsoft.com)
- * All rights reserved.
- *
- * This package is an SSL implementation written
- * by Eric Young (eay@cryptsoft.com).
- * The implementation was written so as to conform with Netscapes SSL.
- * 
- * This library is free for commercial and non-commercial use as long as
- * the following conditions are aheared to.  The following conditions
- * apply to all code found in this distribution, be it the RC4, RSA,
- * lhash, DES, etc., code; not just the SSL code.  The SSL documentation
- * included with this distribution is covered by the same copyright terms
- * except that the holder is Tim Hudson (tjh@cryptsoft.com).
- * 
- * Copyright remains Eric Young's, and as such any Copyright notices in
- * the code are not to be removed.
- * If this package is used in a product, Eric Young should be given attribution
- * as the author of the parts of the library used.
- * This can be in the form of a textual message at program startup or
- * in documentation (online or textual) provided with the package.
- * 
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions
- * are met:
- * 1. Redistributions of source code must retain the copyright
- *    notice, this list of conditions and the following disclaimer.
- * 2. Redistributions in binary form must reproduce the above copyright
- *    notice, this list of conditions and the following disclaimer in the
- *    documentation and/or other materials provided with the distribution.
- * 3. All advertising materials mentioning features or use of this software
- *    must display the following acknowledgement:
- *    "This product includes cryptographic software written by
- *     Eric Young (eay@cryptsoft.com)"
- *    The word 'cryptographic' can be left out if the rouines from the library
- *    being used are not cryptographic related :-).
- * 4. If you include any Windows specific code (or a derivative thereof) from 
- *    the apps directory (application code) you must include an acknowledgement:
- *    "This product includes software written by Tim Hudson (tjh@cryptsoft.com)"
- * 
- * THIS SOFTWARE IS PROVIDED BY ERIC YOUNG ``AS IS'' AND
- * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
- * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
- * ARE DISCLAIMED.  IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE
- * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
- * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
- * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
- * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
- * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
- * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
- * SUCH DAMAGE.
- * 
- * The licence and distribution terms for any publically available version or
- * derivative of this code cannot be changed.  i.e. this code cannot simply be
- * copied and put under another distribution licence
- * [including the GNU Public Licence.]
- */
-/* ====================================================================
- * Copyright (c) 1998-2000 The OpenSSL Project.  All rights reserved.
- *
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions
- * are met:
- *
- * 1. Redistributions of source code must retain the above copyright
- *    notice, this list of conditions and the following disclaimer. 
- *
- * 2. Redistributions in binary form must reproduce the above copyright
- *    notice, this list of conditions and the following disclaimer in
- *    the documentation and/or other materials provided with the
- *    distribution.
- *
- * 3. All advertising materials mentioning features or use of this
- *    software must display the following acknowledgment:
- *    "This product includes software developed by the OpenSSL Project
- *    for use in the OpenSSL Toolkit. (http://www.openssl.org/)"
- *
- * 4. The names "OpenSSL Toolkit" and "OpenSSL Project" must not be used to
- *    endorse or promote products derived from this software without
- *    prior written permission. For written permission, please contact
- *    openssl-core@openssl.org.
- *
- * 5. Products derived from this software may not be called "OpenSSL"
- *    nor may "OpenSSL" appear in their names without prior written
- *    permission of the OpenSSL Project.
- *
- * 6. Redistributions of any form whatsoever must retain the following
- *    acknowledgment:
- *    "This product includes software developed by the OpenSSL Project
- *    for use in the OpenSSL Toolkit (http://www.openssl.org/)"
- *
- * THIS SOFTWARE IS PROVIDED BY THE OpenSSL PROJECT ``AS IS'' AND ANY
- * EXPRESSED OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
- * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR
- * PURPOSE ARE DISCLAIMED.  IN NO EVENT SHALL THE OpenSSL PROJECT OR
- * ITS CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
- * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
- * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
- * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
- * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
- * STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
- * ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED
- * OF THE POSSIBILITY OF SUCH DAMAGE.
- * ====================================================================
- *
- * This product includes cryptographic software written by Eric Young
- * (eay@cryptsoft.com).  This product includes software written by Tim
- * Hudson (tjh@cryptsoft.com).
- *
- */
-
-#ifndef HEADER_RAND_LCL_H
-#define HEADER_RAND_LCL_H
-
-#define ENTROPY_NEEDED 32  /* require 256 bits = 32 bytes of randomness */
-
-
-#if !defined(USE_MD5_RAND) && !defined(USE_SHA1_RAND) && !defined(USE_MDC2_RAND) && !defined(USE_MD2_RAND)
-#if !defined(OPENSSL_NO_SHA) && !defined(OPENSSL_NO_SHA1)
-#define USE_SHA1_RAND
-#elif !defined(OPENSSL_NO_MD5)
-#define USE_MD5_RAND
-#elif !defined(OPENSSL_NO_MDC2) && !defined(OPENSSL_NO_DES)
-#define USE_MDC2_RAND
-#elif !defined(OPENSSL_NO_MD2)
-#define USE_MD2_RAND
-#else
-#error No message digest algorithm available
-#endif
-#endif
-
-#include <openssl/evp.h>
-#define MD_Update(a,b,c)	EVP_DigestUpdate(a,b,c)
-#define	MD_Final(a,b)		EVP_DigestFinal_ex(a,b,NULL)
-#if defined(USE_MD5_RAND)
-#include <openssl/md5.h>
-#define MD_DIGEST_LENGTH	MD5_DIGEST_LENGTH
-#define MD_Init(a)		EVP_DigestInit_ex(a,EVP_md5(), NULL)
-#define	MD(a,b,c)		EVP_Digest(a,b,c,NULL,EVP_md5(), NULL)
-#elif defined(USE_SHA1_RAND)
-#include <openssl/sha.h>
-#define MD_DIGEST_LENGTH	SHA_DIGEST_LENGTH
-#define MD_Init(a)		EVP_DigestInit_ex(a,EVP_sha1(), NULL)
-#define	MD(a,b,c)		EVP_Digest(a,b,c,NULL,EVP_sha1(), NULL)
-#elif defined(USE_MDC2_RAND)
-#include <openssl/mdc2.h>
-#define MD_DIGEST_LENGTH	MDC2_DIGEST_LENGTH
-#define MD_Init(a)		EVP_DigestInit_ex(a,EVP_mdc2(), NULL)
-#define	MD(a,b,c)		EVP_Digest(a,b,c,NULL,EVP_mdc2(), NULL)
-#elif defined(USE_MD2_RAND)
-#include <openssl/md2.h>
-#define MD_DIGEST_LENGTH	MD2_DIGEST_LENGTH
-#define MD_Init(a)		EVP_DigestInit_ex(a,EVP_md2(), NULL)
-#define	MD(a,b,c)		EVP_Digest(a,b,c,NULL,EVP_md2(), NULL)
-#endif
-
-
-#endif
diff --git a/crypto/openssl/crypto/rand/rand_lib.c b/crypto/openssl/crypto/rand/rand_lib.c
deleted file mode 100644
index 513e3389859e..000000000000
--- a/crypto/openssl/crypto/rand/rand_lib.c
+++ /dev/null
@@ -1,176 +0,0 @@
-/* crypto/rand/rand_lib.c */
-/* Copyright (C) 1995-1998 Eric Young (eay@cryptsoft.com)
- * All rights reserved.
- *
- * This package is an SSL implementation written
- * by Eric Young (eay@cryptsoft.com).
- * The implementation was written so as to conform with Netscapes SSL.
- * 
- * This library is free for commercial and non-commercial use as long as
- * the following conditions are aheared to.  The following conditions
- * apply to all code found in this distribution, be it the RC4, RSA,
- * lhash, DES, etc., code; not just the SSL code.  The SSL documentation
- * included with this distribution is covered by the same copyright terms
- * except that the holder is Tim Hudson (tjh@cryptsoft.com).
- * 
- * Copyright remains Eric Young's, and as such any Copyright notices in
- * the code are not to be removed.
- * If this package is used in a product, Eric Young should be given attribution
- * as the author of the parts of the library used.
- * This can be in the form of a textual message at program startup or
- * in documentation (online or textual) provided with the package.
- * 
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions
- * are met:
- * 1. Redistributions of source code must retain the copyright
- *    notice, this list of conditions and the following disclaimer.
- * 2. Redistributions in binary form must reproduce the above copyright
- *    notice, this list of conditions and the following disclaimer in the
- *    documentation and/or other materials provided with the distribution.
- * 3. All advertising materials mentioning features or use of this software
- *    must display the following acknowledgement:
- *    "This product includes cryptographic software written by
- *     Eric Young (eay@cryptsoft.com)"
- *    The word 'cryptographic' can be left out if the rouines from the library
- *    being used are not cryptographic related :-).
- * 4. If you include any Windows specific code (or a derivative thereof) from 
- *    the apps directory (application code) you must include an acknowledgement:
- *    "This product includes software written by Tim Hudson (tjh@cryptsoft.com)"
- * 
- * THIS SOFTWARE IS PROVIDED BY ERIC YOUNG ``AS IS'' AND
- * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
- * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
- * ARE DISCLAIMED.  IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE
- * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
- * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
- * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
- * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
- * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
- * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
- * SUCH DAMAGE.
- * 
- * The licence and distribution terms for any publically available version or
- * derivative of this code cannot be changed.  i.e. this code cannot simply be
- * copied and put under another distribution licence
- * [including the GNU Public Licence.]
- */
-
-#include <stdio.h>
-#include <time.h>
-#include "cryptlib.h"
-#include <openssl/rand.h>
-#ifndef OPENSSL_NO_ENGINE
-#include <openssl/engine.h>
-#endif
-
-#ifndef OPENSSL_NO_ENGINE
-/* non-NULL if default_RAND_meth is ENGINE-provided */
-static ENGINE *funct_ref =NULL;
-#endif
-static const RAND_METHOD *default_RAND_meth = NULL;
-
-int RAND_set_rand_method(const RAND_METHOD *meth)
-	{
-#ifndef OPENSSL_NO_ENGINE
-	if(funct_ref)
-		{
-		ENGINE_finish(funct_ref);
-		funct_ref = NULL;
-		}
-#endif
-	default_RAND_meth = meth;
-	return 1;
-	}
-
-const RAND_METHOD *RAND_get_rand_method(void)
-	{
-	if (!default_RAND_meth)
-		{
-#ifndef OPENSSL_NO_ENGINE
-		ENGINE *e = ENGINE_get_default_RAND();
-		if(e)
-			{
-			default_RAND_meth = ENGINE_get_RAND(e);
-			if(!default_RAND_meth)
-				{
-				ENGINE_finish(e);
-				e = NULL;
-				}
-			}
-		if(e)
-			funct_ref = e;
-		else
-#endif
-			default_RAND_meth = RAND_SSLeay();
-		}
-	return default_RAND_meth;
-	}
-
-#ifndef OPENSSL_NO_ENGINE
-int RAND_set_rand_engine(ENGINE *engine)
-	{
-	const RAND_METHOD *tmp_meth = NULL;
-	if(engine)
-		{
-		if(!ENGINE_init(engine))
-			return 0;
-		tmp_meth = ENGINE_get_RAND(engine);
-		if(!tmp_meth)
-			{
-			ENGINE_finish(engine);
-			return 0;
-			}
-		}
-	/* This function releases any prior ENGINE so call it first */
-	RAND_set_rand_method(tmp_meth);
-	funct_ref = engine;
-	return 1;
-	}
-#endif
-
-void RAND_cleanup(void)
-	{
-	const RAND_METHOD *meth = RAND_get_rand_method();
-	if (meth && meth->cleanup)
-		meth->cleanup();
-	RAND_set_rand_method(NULL);
-	}
-
-void RAND_seed(const void *buf, int num)
-	{
-	const RAND_METHOD *meth = RAND_get_rand_method();
-	if (meth && meth->seed)
-		meth->seed(buf,num);
-	}
-
-void RAND_add(const void *buf, int num, double entropy)
-	{
-	const RAND_METHOD *meth = RAND_get_rand_method();
-	if (meth && meth->add)
-		meth->add(buf,num,entropy);
-	}
-
-int RAND_bytes(unsigned char *buf, int num)
-	{
-	const RAND_METHOD *meth = RAND_get_rand_method();
-	if (meth && meth->bytes)
-		return meth->bytes(buf,num);
-	return(-1);
-	}
-
-int RAND_pseudo_bytes(unsigned char *buf, int num)
-	{
-	const RAND_METHOD *meth = RAND_get_rand_method();
-	if (meth && meth->pseudorand)
-		return meth->pseudorand(buf,num);
-	return(-1);
-	}
-
-int RAND_status(void)
-	{
-	const RAND_METHOD *meth = RAND_get_rand_method();
-	if (meth && meth->status)
-		return meth->status();
-	return 0;
-	}
diff --git a/crypto/openssl/crypto/rand/rand_nw.c b/crypto/openssl/crypto/rand/rand_nw.c
deleted file mode 100644
index ba5781278875..000000000000
--- a/crypto/openssl/crypto/rand/rand_nw.c
+++ /dev/null
@@ -1,176 +0,0 @@
-/* crypto/rand/rand_nw.c */
-/* Copyright (C) 1995-1998 Eric Young (eay@cryptsoft.com)
- * All rights reserved.
- *
- * This package is an SSL implementation written
- * by Eric Young (eay@cryptsoft.com).
- * The implementation was written so as to conform with Netscapes SSL.
- * 
- * This library is free for commercial and non-commercial use as long as
- * the following conditions are aheared to.  The following conditions
- * apply to all code found in this distribution, be it the RC4, RSA,
- * lhash, DES, etc., code; not just the SSL code.  The SSL documentation
- * included with this distribution is covered by the same copyright terms
- * except that the holder is Tim Hudson (tjh@cryptsoft.com).
- * 
- * Copyright remains Eric Young's, and as such any Copyright notices in
- * the code are not to be removed.
- * If this package is used in a product, Eric Young should be given attribution
- * as the author of the parts of the library used.
- * This can be in the form of a textual message at program startup or
- * in documentation (online or textual) provided with the package.
- * 
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions
- * are met:
- * 1. Redistributions of source code must retain the copyright
- *    notice, this list of conditions and the following disclaimer.
- * 2. Redistributions in binary form must reproduce the above copyright
- *    notice, this list of conditions and the following disclaimer in the
- *    documentation and/or other materials provided with the distribution.
- * 3. All advertising materials mentioning features or use of this software
- *    must display the following acknowledgement:
- *    "This product includes cryptographic software written by
- *     Eric Young (eay@cryptsoft.com)"
- *    The word 'cryptographic' can be left out if the rouines from the library
- *    being used are not cryptographic related :-).
- * 4. If you include any Windows specific code (or a derivative thereof) from 
- *    the apps directory (application code) you must include an acknowledgement:
- *    "This product includes software written by Tim Hudson (tjh@cryptsoft.com)"
- * 
- * THIS SOFTWARE IS PROVIDED BY ERIC YOUNG ``AS IS'' AND
- * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
- * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
- * ARE DISCLAIMED.  IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE
- * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
- * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
- * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
- * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
- * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
- * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
- * SUCH DAMAGE.
- * 
- * The licence and distribution terms for any publically available version or
- * derivative of this code cannot be changed.  i.e. this code cannot simply be
- * copied and put under another distribution licence
- * [including the GNU Public Licence.]
- */
-/* ====================================================================
- * Copyright (c) 1998-2000 The OpenSSL Project.  All rights reserved.
- *
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions
- * are met:
- *
- * 1. Redistributions of source code must retain the above copyright
- *    notice, this list of conditions and the following disclaimer. 
- *
- * 2. Redistributions in binary form must reproduce the above copyright
- *    notice, this list of conditions and the following disclaimer in
- *    the documentation and/or other materials provided with the
- *    distribution.
- *
- * 3. All advertising materials mentioning features or use of this
- *    software must display the following acknowledgment:
- *    "This product includes software developed by the OpenSSL Project
- *    for use in the OpenSSL Toolkit. (http://www.openssl.org/)"
- *
- * 4. The names "OpenSSL Toolkit" and "OpenSSL Project" must not be used to
- *    endorse or promote products derived from this software without
- *    prior written permission. For written permission, please contact
- *    openssl-core@openssl.org.
- *
- * 5. Products derived from this software may not be called "OpenSSL"
- *    nor may "OpenSSL" appear in their names without prior written
- *    permission of the OpenSSL Project.
- *
- * 6. Redistributions of any form whatsoever must retain the following
- *    acknowledgment:
- *    "This product includes software developed by the OpenSSL Project
- *    for use in the OpenSSL Toolkit (http://www.openssl.org/)"
- *
- * THIS SOFTWARE IS PROVIDED BY THE OpenSSL PROJECT ``AS IS'' AND ANY
- * EXPRESSED OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
- * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR
- * PURPOSE ARE DISCLAIMED.  IN NO EVENT SHALL THE OpenSSL PROJECT OR
- * ITS CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
- * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
- * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
- * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
- * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
- * STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
- * ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED
- * OF THE POSSIBILITY OF SUCH DAMAGE.
- * ====================================================================
- *
- * This product includes cryptographic software written by Eric Young
- * (eay@cryptsoft.com).  This product includes software written by Tim
- * Hudson (tjh@cryptsoft.com).
- *
- */
-
-#include "cryptlib.h"
-#include <openssl/rand.h>
-#include "rand_lcl.h"
-
-#if defined (OPENSSL_SYS_NETWARE)
-
-#if defined(NETWARE_LIBC)
-#include <nks/thread.h>
-#endif
-
-extern long RunningProcess;
-
-   /* the FAQ indicates we need to provide at least 20 bytes (160 bits) of seed
-   */
-int RAND_poll(void)
-{
-   unsigned long l;
-   unsigned long tsc;
-   int i; 
-
-      /* There are several options to gather miscellaneous data
-       * but for now we will loop checking the time stamp counter (rdtsc) and
-       * the SuperHighResolutionTimer.  Each iteration will collect 8 bytes
-       * of data but it is treated as only 1 byte of entropy.  The call to
-       * ThreadSwitchWithDelay() will introduce additional variability into
-       * the data returned by rdtsc.
-       *
-       * Applications can agument the seed material by adding additional
-       * stuff with RAND_add() and should probably do so.
-      */
-   l = GetProcessSwitchCount();
-   RAND_add(&l,sizeof(l),1);
-   
-   l=RunningProcess;
-   RAND_add(&l,sizeof(l),1);
-
-   for( i=2; i<ENTROPY_NEEDED; i++)
-   {
-#ifdef __MWERKS__
-      asm 
-      {
-         rdtsc
-         mov tsc, eax        
-      }
-#else
-      asm volatile("rdtsc":"=A" (tsc));
-#endif
-
-      RAND_add(&tsc, sizeof(tsc), 1);
-
-      l = GetSuperHighResolutionTimer();
-      RAND_add(&l, sizeof(l), 0);
-
-# if defined(NETWARE_LIBC)
-      NXThreadYield();
-# else /* NETWARE_CLIB */
-      ThreadSwitchWithDelay();
-# endif
-   }
-
-   return 1;
-}
-
-#endif 
-
diff --git a/crypto/openssl/crypto/rand/rand_os2.c b/crypto/openssl/crypto/rand/rand_os2.c
deleted file mode 100644
index c3e36d4e5e33..000000000000
--- a/crypto/openssl/crypto/rand/rand_os2.c
+++ /dev/null
@@ -1,147 +0,0 @@
-/* crypto/rand/rand_os2.c */
-/* ====================================================================
- * Copyright (c) 1998-2000 The OpenSSL Project.  All rights reserved.
- *
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions
- * are met:
- *
- * 1. Redistributions of source code must retain the above copyright
- *    notice, this list of conditions and the following disclaimer. 
- *
- * 2. Redistributions in binary form must reproduce the above copyright
- *    notice, this list of conditions and the following disclaimer in
- *    the documentation and/or other materials provided with the
- *    distribution.
- *
- * 3. All advertising materials mentioning features or use of this
- *    software must display the following acknowledgment:
- *    "This product includes software developed by the OpenSSL Project
- *    for use in the OpenSSL Toolkit. (http://www.openssl.org/)"
- *
- * 4. The names "OpenSSL Toolkit" and "OpenSSL Project" must not be used to
- *    endorse or promote products derived from this software without
- *    prior written permission. For written permission, please contact
- *    openssl-core@openssl.org.
- *
- * 5. Products derived from this software may not be called "OpenSSL"
- *    nor may "OpenSSL" appear in their names without prior written
- *    permission of the OpenSSL Project.
- *
- * 6. Redistributions of any form whatsoever must retain the following
- *    acknowledgment:
- *    "This product includes software developed by the OpenSSL Project
- *    for use in the OpenSSL Toolkit (http://www.openssl.org/)"
- *
- * THIS SOFTWARE IS PROVIDED BY THE OpenSSL PROJECT ``AS IS'' AND ANY
- * EXPRESSED OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
- * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR
- * PURPOSE ARE DISCLAIMED.  IN NO EVENT SHALL THE OpenSSL PROJECT OR
- * ITS CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
- * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
- * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
- * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
- * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
- * STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
- * ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED
- * OF THE POSSIBILITY OF SUCH DAMAGE.
- * ====================================================================
- *
- * This product includes cryptographic software written by Eric Young
- * (eay@cryptsoft.com).  This product includes software written by Tim
- * Hudson (tjh@cryptsoft.com).
- *
- */
-
-#include "cryptlib.h"
-#include <openssl/rand.h>
-#include "rand_lcl.h"
-
-#ifdef OPENSSL_SYS_OS2
-
-#define INCL_DOSPROCESS
-#define INCL_DOSPROFILE
-#define INCL_DOSMISC
-#define INCL_DOSMODULEMGR
-#include <os2.h>
-
-#define   CMD_KI_RDCNT    (0x63)
-
-typedef struct _CPUUTIL {
-    ULONG ulTimeLow;            /* Low 32 bits of time stamp      */
-    ULONG ulTimeHigh;           /* High 32 bits of time stamp     */
-    ULONG ulIdleLow;            /* Low 32 bits of idle time       */
-    ULONG ulIdleHigh;           /* High 32 bits of idle time      */
-    ULONG ulBusyLow;            /* Low 32 bits of busy time       */
-    ULONG ulBusyHigh;           /* High 32 bits of busy time      */
-    ULONG ulIntrLow;            /* Low 32 bits of interrupt time  */
-    ULONG ulIntrHigh;           /* High 32 bits of interrupt time */
-} CPUUTIL;
-
-APIRET APIENTRY(*DosPerfSysCall) (ULONG ulCommand, ULONG ulParm1, ULONG ulParm2, ULONG ulParm3) = NULL;
-APIRET APIENTRY(*DosQuerySysState) (ULONG func, ULONG arg1, ULONG pid, ULONG _res_, PVOID buf, ULONG bufsz) = NULL;
-HMODULE hDoscalls = 0;
-
-int RAND_poll(void)
-{
-    char failed_module[20];
-    QWORD qwTime;
-    ULONG SysVars[QSV_FOREGROUND_PROCESS];
-
-    if (hDoscalls == 0) {
-        ULONG rc = DosLoadModule(failed_module, sizeof(failed_module), "DOSCALLS", &hDoscalls);
-
-        if (rc == 0) {
-            rc = DosQueryProcAddr(hDoscalls, 976, NULL, (PFN *)&DosPerfSysCall);
-
-            if (rc)
-                DosPerfSysCall = NULL;
-
-            rc = DosQueryProcAddr(hDoscalls, 368, NULL, (PFN *)&DosQuerySysState);
-
-            if (rc)
-                DosQuerySysState = NULL;
-        }
-    }
-
-    /* Sample the hi-res timer, runs at around 1.1 MHz */
-    DosTmrQueryTime(&qwTime);
-    RAND_add(&qwTime, sizeof(qwTime), 2);
-
-    /* Sample a bunch of system variables, includes various process & memory statistics */
-    DosQuerySysInfo(1, QSV_FOREGROUND_PROCESS, SysVars, sizeof(SysVars));
-    RAND_add(SysVars, sizeof(SysVars), 4);
-
-    /* If available, sample CPU registers that count at CPU MHz
-     * Only fairly new CPUs (PPro & K6 onwards) & OS/2 versions support this
-     */
-    if (DosPerfSysCall) {
-        CPUUTIL util;
-
-        if (DosPerfSysCall(CMD_KI_RDCNT, (ULONG)&util, 0, 0) == 0) {
-            RAND_add(&util, sizeof(util), 10);
-        }
-        else {
-            DosPerfSysCall = NULL;
-        }
-    }
-
-    /* DosQuerySysState() gives us a huge quantity of process, thread, memory & handle stats */
-    if (DosQuerySysState) {
-        char *buffer = OPENSSL_malloc(256 * 1024);
-
-        if (DosQuerySysState(0x1F, 0, 0, 0, buffer, 256 * 1024) == 0) {
-            /* First 4 bytes in buffer is a pointer to the thread count
-             * there should be at least 1 byte of entropy per thread
-             */
-            RAND_add(buffer, 256 * 1024, **(ULONG **)buffer);
-        }
-
-        OPENSSL_free(buffer);
-        return 1;
-    }
-
-    return 0;
-}
-
-#endif /* OPENSSL_SYS_OS2 */
diff --git a/crypto/openssl/crypto/rand/rand_unix.c b/crypto/openssl/crypto/rand/rand_unix.c
deleted file mode 100644
index 6c2be5cb966d..000000000000
--- a/crypto/openssl/crypto/rand/rand_unix.c
+++ /dev/null
@@ -1,330 +0,0 @@
-/* crypto/rand/rand_unix.c */
-/* Copyright (C) 1995-1998 Eric Young (eay@cryptsoft.com)
- * All rights reserved.
- *
- * This package is an SSL implementation written
- * by Eric Young (eay@cryptsoft.com).
- * The implementation was written so as to conform with Netscapes SSL.
- * 
- * This library is free for commercial and non-commercial use as long as
- * the following conditions are aheared to.  The following conditions
- * apply to all code found in this distribution, be it the RC4, RSA,
- * lhash, DES, etc., code; not just the SSL code.  The SSL documentation
- * included with this distribution is covered by the same copyright terms
- * except that the holder is Tim Hudson (tjh@cryptsoft.com).
- * 
- * Copyright remains Eric Young's, and as such any Copyright notices in
- * the code are not to be removed.
- * If this package is used in a product, Eric Young should be given attribution
- * as the author of the parts of the library used.
- * This can be in the form of a textual message at program startup or
- * in documentation (online or textual) provided with the package.
- * 
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions
- * are met:
- * 1. Redistributions of source code must retain the copyright
- *    notice, this list of conditions and the following disclaimer.
- * 2. Redistributions in binary form must reproduce the above copyright
- *    notice, this list of conditions and the following disclaimer in the
- *    documentation and/or other materials provided with the distribution.
- * 3. All advertising materials mentioning features or use of this software
- *    must display the following acknowledgement:
- *    "This product includes cryptographic software written by
- *     Eric Young (eay@cryptsoft.com)"
- *    The word 'cryptographic' can be left out if the rouines from the library
- *    being used are not cryptographic related :-).
- * 4. If you include any Windows specific code (or a derivative thereof) from 
- *    the apps directory (application code) you must include an acknowledgement:
- *    "This product includes software written by Tim Hudson (tjh@cryptsoft.com)"
- * 
- * THIS SOFTWARE IS PROVIDED BY ERIC YOUNG ``AS IS'' AND
- * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
- * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
- * ARE DISCLAIMED.  IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE
- * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
- * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
- * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
- * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
- * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
- * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
- * SUCH DAMAGE.
- * 
- * The licence and distribution terms for any publically available version or
- * derivative of this code cannot be changed.  i.e. this code cannot simply be
- * copied and put under another distribution licence
- * [including the GNU Public Licence.]
- */
-/* ====================================================================
- * Copyright (c) 1998-2006 The OpenSSL Project.  All rights reserved.
- *
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions
- * are met:
- *
- * 1. Redistributions of source code must retain the above copyright
- *    notice, this list of conditions and the following disclaimer. 
- *
- * 2. Redistributions in binary form must reproduce the above copyright
- *    notice, this list of conditions and the following disclaimer in
- *    the documentation and/or other materials provided with the
- *    distribution.
- *
- * 3. All advertising materials mentioning features or use of this
- *    software must display the following acknowledgment:
- *    "This product includes software developed by the OpenSSL Project
- *    for use in the OpenSSL Toolkit. (http://www.openssl.org/)"
- *
- * 4. The names "OpenSSL Toolkit" and "OpenSSL Project" must not be used to
- *    endorse or promote products derived from this software without
- *    prior written permission. For written permission, please contact
- *    openssl-core@openssl.org.
- *
- * 5. Products derived from this software may not be called "OpenSSL"
- *    nor may "OpenSSL" appear in their names without prior written
- *    permission of the OpenSSL Project.
- *
- * 6. Redistributions of any form whatsoever must retain the following
- *    acknowledgment:
- *    "This product includes software developed by the OpenSSL Project
- *    for use in the OpenSSL Toolkit (http://www.openssl.org/)"
- *
- * THIS SOFTWARE IS PROVIDED BY THE OpenSSL PROJECT ``AS IS'' AND ANY
- * EXPRESSED OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
- * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR
- * PURPOSE ARE DISCLAIMED.  IN NO EVENT SHALL THE OpenSSL PROJECT OR
- * ITS CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
- * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
- * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
- * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
- * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
- * STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
- * ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED
- * OF THE POSSIBILITY OF SUCH DAMAGE.
- * ====================================================================
- *
- * This product includes cryptographic software written by Eric Young
- * (eay@cryptsoft.com).  This product includes software written by Tim
- * Hudson (tjh@cryptsoft.com).
- *
- */
-#include <stdio.h>
-
-#define USE_SOCKETS
-#include "e_os.h"
-#include "cryptlib.h"
-#include <openssl/rand.h>
-#include "rand_lcl.h"
-
-#if !(defined(OPENSSL_SYS_WINDOWS) || defined(OPENSSL_SYS_WIN32) || defined(OPENSSL_SYS_VMS) || defined(OPENSSL_SYS_OS2) || defined(OPENSSL_SYS_VXWORKS) || defined(OPENSSL_SYS_NETWARE))
-
-#include <sys/types.h>
-#include <sys/time.h>
-#include <sys/times.h>
-#include <sys/stat.h>
-#include <fcntl.h>
-#include <unistd.h>
-#include <time.h>
-#if defined(OPENSSL_SYS_LINUX) /* should actually be available virtually everywhere */
-# include <poll.h>
-#endif
-#include <limits.h>
-#ifndef FD_SETSIZE
-# define FD_SETSIZE (8*sizeof(fd_set))
-#endif
-
-#ifdef __OpenBSD__
-int RAND_poll(void)
-{
-	u_int32_t rnd = 0, i;
-	unsigned char buf[ENTROPY_NEEDED];
-
-	for (i = 0; i < sizeof(buf); i++) {
-		if (i % 4 == 0)
-			rnd = arc4random();
-		buf[i] = rnd;
-		rnd >>= 8;
-	}
-	RAND_add(buf, sizeof(buf), ENTROPY_NEEDED);
-	memset(buf, 0, sizeof(buf));
-
-	return 1;
-}
-#else /* !defined(__OpenBSD__) */
-int RAND_poll(void)
-{
-	unsigned long l;
-	pid_t curr_pid = getpid();
-#if defined(DEVRANDOM) || defined(DEVRANDOM_EGD)
-	unsigned char tmpbuf[ENTROPY_NEEDED];
-	int n = 0;
-#endif
-#ifdef DEVRANDOM
-	static const char *randomfiles[] = { DEVRANDOM };
-	struct stat randomstats[sizeof(randomfiles)/sizeof(randomfiles[0])];
-	int fd;
-	size_t i;
-#endif
-#ifdef DEVRANDOM_EGD
-	static const char *egdsockets[] = { DEVRANDOM_EGD, NULL };
-	const char **egdsocket = NULL;
-#endif
-
-#ifdef DEVRANDOM
-	memset(randomstats,0,sizeof(randomstats));
-	/* Use a random entropy pool device. Linux, FreeBSD and OpenBSD
-	 * have this. Use /dev/urandom if you can as /dev/random may block
-	 * if it runs out of random entries.  */
-
-	for (i=0; i<sizeof(randomfiles)/sizeof(randomfiles[0]) && n < ENTROPY_NEEDED; i++)
-		{
-		if ((fd = open(randomfiles[i], O_RDONLY
-#ifdef O_NONBLOCK
-			|O_NONBLOCK
-#endif
-#ifdef O_BINARY
-			|O_BINARY
-#endif
-#ifdef O_NOCTTY /* If it happens to be a TTY (god forbid), do not make it
-		   our controlling tty */
-			|O_NOCTTY
-#endif
-			)) >= 0)
-			{
-			int usec = 10*1000; /* spend 10ms on each file */
-			int r;
-			size_t j;
-			struct stat *st=&randomstats[i];
-
-			/* Avoid using same input... Used to be O_NOFOLLOW
-			 * above, but it's not universally appropriate... */
-			if (fstat(fd,st) != 0)	{ close(fd); continue; }
-			for (j=0;j<i;j++)
-				{
-				if (randomstats[j].st_ino==st->st_ino &&
-				    randomstats[j].st_dev==st->st_dev)
-					break;
-				}
-			if (j<i)		{ close(fd); continue; }
-
-			do
-				{
-				int try_read = 0;
-
-#if defined(OPENSSL_SYS_LINUX)
-				/* use poll() */
-				struct pollfd pset;
-				
-				pset.fd = fd;
-				pset.events = POLLIN;
-				pset.revents = 0;
-
-				if (poll(&pset, 1, usec / 1000) < 0)
-					usec = 0;
-				else
-					try_read = (pset.revents & POLLIN) != 0;
-
-#else
-				/* use select() */
-				fd_set fset;
-				struct timeval t;
-				
-				t.tv_sec = 0;
-				t.tv_usec = usec;
-
-				if (FD_SETSIZE > 0 && fd >= FD_SETSIZE)
-					{
-					/* can't use select, so just try to read once anyway */
-					try_read = 1;
-					}
-				else
-					{
-					FD_ZERO(&fset);
-					FD_SET(fd, &fset);
-					
-					if (select(fd+1,&fset,NULL,NULL,&t) >= 0)
-						{
-						usec = t.tv_usec;
-						if (FD_ISSET(fd, &fset))
-							try_read = 1;
-						}
-					else
-						usec = 0;
-					}
-#endif
-				
-				if (try_read)
-					{
-					r = read(fd,(unsigned char *)tmpbuf+n, ENTROPY_NEEDED-n);
-					if (r > 0)
-						n += r;
-					}
-				else
-					r = -1;
-				
-				/* Some Unixen will update t in select(), some
-				   won't.  For those who won't, or if we
-				   didn't use select() in the first place,
-				   give up here, otherwise, we will do
-				   this once again for the remaining
-				   time. */
-				if (usec == 10*1000)
-					usec = 0;
-				}
-			while ((r > 0 ||
-			       (errno == EINTR || errno == EAGAIN)) && usec != 0 && n < ENTROPY_NEEDED);
-
-			close(fd);
-			}
-		}
-#endif /* defined(DEVRANDOM) */
-
-#ifdef DEVRANDOM_EGD
-	/* Use an EGD socket to read entropy from an EGD or PRNGD entropy
-	 * collecting daemon. */
-
-	for (egdsocket = egdsockets; *egdsocket && n < ENTROPY_NEEDED; egdsocket++)
-		{
-		int r;
-
-		r = RAND_query_egd_bytes(*egdsocket, (unsigned char *)tmpbuf+n,
-					 ENTROPY_NEEDED-n);
-		if (r > 0)
-			n += r;
-		}
-#endif /* defined(DEVRANDOM_EGD) */
-
-#if defined(DEVRANDOM) || defined(DEVRANDOM_EGD)
-	if (n > 0)
-		{
-		RAND_add(tmpbuf,sizeof tmpbuf,(double)n);
-		OPENSSL_cleanse(tmpbuf,n);
-		}
-#endif
-
-	/* put in some default random data, we need more than just this */
-	l=curr_pid;
-	RAND_add(&l,sizeof(l),0.0);
-	l=getuid();
-	RAND_add(&l,sizeof(l),0.0);
-
-	l=time(NULL);
-	RAND_add(&l,sizeof(l),0.0);
-
-#if defined(DEVRANDOM) || defined(DEVRANDOM_EGD)
-	return 1;
-#else
-	return 0;
-#endif
-}
-
-#endif /* defined(__OpenBSD__) */
-#endif /* !(defined(OPENSSL_SYS_WINDOWS) || defined(OPENSSL_SYS_WIN32) || defined(OPENSSL_SYS_VMS) || defined(OPENSSL_SYS_OS2) || defined(OPENSSL_SYS_VXWORKS) || defined(OPENSSL_SYS_NETWARE)) */
-
-
-#if defined(OPENSSL_SYS_VXWORKS)
-int RAND_poll(void)
-	{
-	return 0;
-	}
-#endif
diff --git a/crypto/openssl/crypto/rand/rand_vms.c b/crypto/openssl/crypto/rand/rand_vms.c
deleted file mode 100644
index 1267a3acae7c..000000000000
--- a/crypto/openssl/crypto/rand/rand_vms.c
+++ /dev/null
@@ -1,136 +0,0 @@
-/* crypto/rand/rand_vms.c -*- mode:C; c-file-style: "eay" -*- */
-/* Written by Richard Levitte <richard@levitte.org> for the OpenSSL
- * project 2000.
- */
-/* ====================================================================
- * Copyright (c) 1998-2000 The OpenSSL Project.  All rights reserved.
- *
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions
- * are met:
- *
- * 1. Redistributions of source code must retain the above copyright
- *    notice, this list of conditions and the following disclaimer. 
- *
- * 2. Redistributions in binary form must reproduce the above copyright
- *    notice, this list of conditions and the following disclaimer in
- *    the documentation and/or other materials provided with the
- *    distribution.
- *
- * 3. All advertising materials mentioning features or use of this
- *    software must display the following acknowledgment:
- *    "This product includes software developed by the OpenSSL Project
- *    for use in the OpenSSL Toolkit. (http://www.openssl.org/)"
- *
- * 4. The names "OpenSSL Toolkit" and "OpenSSL Project" must not be used to
- *    endorse or promote products derived from this software without
- *    prior written permission. For written permission, please contact
- *    openssl-core@openssl.org.
- *
- * 5. Products derived from this software may not be called "OpenSSL"
- *    nor may "OpenSSL" appear in their names without prior written
- *    permission of the OpenSSL Project.
- *
- * 6. Redistributions of any form whatsoever must retain the following
- *    acknowledgment:
- *    "This product includes software developed by the OpenSSL Project
- *    for use in the OpenSSL Toolkit (http://www.openssl.org/)"
- *
- * THIS SOFTWARE IS PROVIDED BY THE OpenSSL PROJECT ``AS IS'' AND ANY
- * EXPRESSED OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
- * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR
- * PURPOSE ARE DISCLAIMED.  IN NO EVENT SHALL THE OpenSSL PROJECT OR
- * ITS CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
- * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
- * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
- * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
- * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
- * STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
- * ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED
- * OF THE POSSIBILITY OF SUCH DAMAGE.
- * ====================================================================
- *
- * This product includes cryptographic software written by Eric Young
- * (eay@cryptsoft.com).  This product includes software written by Tim
- * Hudson (tjh@cryptsoft.com).
- *
- */
-
-#include <openssl/rand.h>
-#include "rand_lcl.h"
-
-#if defined(OPENSSL_SYS_VMS)
-
-#include <descrip.h>
-#include <jpidef.h>
-#include <ssdef.h>
-#include <starlet.h>
-#ifdef __DECC
-# pragma message disable DOLLARID
-#endif
-
-static struct items_data_st
-	{
-	short length, code;	/* length is amount of bytes */
-	} items_data[] =
-		{ { 4, JPI$_BUFIO },
-		  { 4, JPI$_CPUTIM },
-		  { 4, JPI$_DIRIO },
-		  { 8, JPI$_LOGINTIM },
-		  { 4, JPI$_PAGEFLTS },
-		  { 4, JPI$_PID },
-		  { 4, JPI$_WSSIZE },
-		  { 0, 0 }
-		};
-		  
-int RAND_poll(void)
-	{
-	long pid, iosb[2];
-	int status = 0;
-	struct
-		{
-		short length, code;
-		long *buffer;
-		int *retlen;
-		} item[32], *pitem;
-	unsigned char data_buffer[256];
-	short total_length = 0;
-	struct items_data_st *pitems_data;
-
-	pitems_data = items_data;
-	pitem = item;
-
-	/* Setup */
-	while (pitems_data->length
-		&& (total_length + pitems_data->length <= 256))
-		{
-		pitem->length = pitems_data->length;
-		pitem->code = pitems_data->code;
-		pitem->buffer = (long *)&data_buffer[total_length];
-		pitem->retlen = 0;
-		total_length += pitems_data->length;
-		pitems_data++;
-		pitem++;
-		}
-	pitem->length = pitem->code = 0;
-
-	/*
-	 * Scan through all the processes in the system and add entropy with
-	 * results from the processes that were possible to look at.
-	 * However, view the information as only half trustable.
-	 */
-	pid = -1;			/* search context */
-	while ((status = sys$getjpiw(0, &pid,  0, item, iosb, 0, 0))
-		!= SS$_NOMOREPROC)
-		{
-		if (status == SS$_NORMAL)
-			{
-			RAND_add(data_buffer, total_length, total_length/2);
-			}
-		}
-	sys$gettim(iosb);
-	RAND_add((unsigned char *)iosb, sizeof(iosb), sizeof(iosb)/2);
-	return 1;
-}
-
-#endif
diff --git a/crypto/openssl/crypto/rand/rand_win.c b/crypto/openssl/crypto/rand/rand_win.c
deleted file mode 100644
index 00dbe4232cc1..000000000000
--- a/crypto/openssl/crypto/rand/rand_win.c
+++ /dev/null
@@ -1,758 +0,0 @@
-/* crypto/rand/rand_win.c */
-/* Copyright (C) 1995-1998 Eric Young (eay@cryptsoft.com)
- * All rights reserved.
- *
- * This package is an SSL implementation written
- * by Eric Young (eay@cryptsoft.com).
- * The implementation was written so as to conform with Netscapes SSL.
- * 
- * This library is free for commercial and non-commercial use as long as
- * the following conditions are aheared to.  The following conditions
- * apply to all code found in this distribution, be it the RC4, RSA,
- * lhash, DES, etc., code; not just the SSL code.  The SSL documentation
- * included with this distribution is covered by the same copyright terms
- * except that the holder is Tim Hudson (tjh@cryptsoft.com).
- * 
- * Copyright remains Eric Young's, and as such any Copyright notices in
- * the code are not to be removed.
- * If this package is used in a product, Eric Young should be given attribution
- * as the author of the parts of the library used.
- * This can be in the form of a textual message at program startup or
- * in documentation (online or textual) provided with the package.
- * 
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions
- * are met:
- * 1. Redistributions of source code must retain the copyright
- *    notice, this list of conditions and the following disclaimer.
- * 2. Redistributions in binary form must reproduce the above copyright
- *    notice, this list of conditions and the following disclaimer in the
- *    documentation and/or other materials provided with the distribution.
- * 3. All advertising materials mentioning features or use of this software
- *    must display the following acknowledgement:
- *    "This product includes cryptographic software written by
- *     Eric Young (eay@cryptsoft.com)"
- *    The word 'cryptographic' can be left out if the rouines from the library
- *    being used are not cryptographic related :-).
- * 4. If you include any Windows specific code (or a derivative thereof) from 
- *    the apps directory (application code) you must include an acknowledgement:
- *    "This product includes software written by Tim Hudson (tjh@cryptsoft.com)"
- * 
- * THIS SOFTWARE IS PROVIDED BY ERIC YOUNG ``AS IS'' AND
- * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
- * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
- * ARE DISCLAIMED.  IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE
- * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
- * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
- * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
- * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
- * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
- * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
- * SUCH DAMAGE.
- * 
- * The licence and distribution terms for any publically available version or
- * derivative of this code cannot be changed.  i.e. this code cannot simply be
- * copied and put under another distribution licence
- * [including the GNU Public Licence.]
- */
-/* ====================================================================
- * Copyright (c) 1998-2000 The OpenSSL Project.  All rights reserved.
- *
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions
- * are met:
- *
- * 1. Redistributions of source code must retain the above copyright
- *    notice, this list of conditions and the following disclaimer. 
- *
- * 2. Redistributions in binary form must reproduce the above copyright
- *    notice, this list of conditions and the following disclaimer in
- *    the documentation and/or other materials provided with the
- *    distribution.
- *
- * 3. All advertising materials mentioning features or use of this
- *    software must display the following acknowledgment:
- *    "This product includes software developed by the OpenSSL Project
- *    for use in the OpenSSL Toolkit. (http://www.openssl.org/)"
- *
- * 4. The names "OpenSSL Toolkit" and "OpenSSL Project" must not be used to
- *    endorse or promote products derived from this software without
- *    prior written permission. For written permission, please contact
- *    openssl-core@openssl.org.
- *
- * 5. Products derived from this software may not be called "OpenSSL"
- *    nor may "OpenSSL" appear in their names without prior written
- *    permission of the OpenSSL Project.
- *
- * 6. Redistributions of any form whatsoever must retain the following
- *    acknowledgment:
- *    "This product includes software developed by the OpenSSL Project
- *    for use in the OpenSSL Toolkit (http://www.openssl.org/)"
- *
- * THIS SOFTWARE IS PROVIDED BY THE OpenSSL PROJECT ``AS IS'' AND ANY
- * EXPRESSED OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
- * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR
- * PURPOSE ARE DISCLAIMED.  IN NO EVENT SHALL THE OpenSSL PROJECT OR
- * ITS CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
- * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
- * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
- * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
- * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
- * STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
- * ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED
- * OF THE POSSIBILITY OF SUCH DAMAGE.
- * ====================================================================
- *
- * This product includes cryptographic software written by Eric Young
- * (eay@cryptsoft.com).  This product includes software written by Tim
- * Hudson (tjh@cryptsoft.com).
- *
- */
-
-#include "cryptlib.h"
-#include <openssl/rand.h>
-#include "rand_lcl.h"
-
-#if defined(OPENSSL_SYS_WINDOWS) || defined(OPENSSL_SYS_WIN32)
-#include <windows.h>
-#ifndef _WIN32_WINNT
-# define _WIN32_WINNT 0x0400
-#endif
-#include <wincrypt.h>
-#include <tlhelp32.h>
-
-/* Limit the time spent walking through the heap, processes, threads and modules to
-   a maximum of 1000 miliseconds each, unless CryptoGenRandom failed */
-#define MAXDELAY 1000
-
-/* Intel hardware RNG CSP -- available from
- * http://developer.intel.com/design/security/rng/redist_license.htm
- */
-#define PROV_INTEL_SEC 22
-#define INTEL_DEF_PROV L"Intel Hardware Cryptographic Service Provider"
-
-static void readtimer(void);
-static void readscreen(void);
-
-/* It appears like CURSORINFO, PCURSORINFO and LPCURSORINFO are only defined
-   when WINVER is 0x0500 and up, which currently only happens on Win2000.
-   Unfortunately, those are typedefs, so they're a little bit difficult to
-   detect properly.  On the other hand, the macro CURSOR_SHOWING is defined
-   within the same conditional, so it can be use to detect the absence of said
-   typedefs. */
-
-#ifndef CURSOR_SHOWING
-/*
- * Information about the global cursor.
- */
-typedef struct tagCURSORINFO
-{
-    DWORD   cbSize;
-    DWORD   flags;
-    HCURSOR hCursor;
-    POINT   ptScreenPos;
-} CURSORINFO, *PCURSORINFO, *LPCURSORINFO;
-
-#define CURSOR_SHOWING     0x00000001
-#endif /* CURSOR_SHOWING */
-
-#if !defined(OPENSSL_SYS_WINCE)
-typedef BOOL (WINAPI *CRYPTACQUIRECONTEXTW)(HCRYPTPROV *, LPCWSTR, LPCWSTR,
-				    DWORD, DWORD);
-typedef BOOL (WINAPI *CRYPTGENRANDOM)(HCRYPTPROV, DWORD, BYTE *);
-typedef BOOL (WINAPI *CRYPTRELEASECONTEXT)(HCRYPTPROV, DWORD);
-
-typedef HWND (WINAPI *GETFOREGROUNDWINDOW)(VOID);
-typedef BOOL (WINAPI *GETCURSORINFO)(PCURSORINFO);
-typedef DWORD (WINAPI *GETQUEUESTATUS)(UINT);
-
-typedef HANDLE (WINAPI *CREATETOOLHELP32SNAPSHOT)(DWORD, DWORD);
-typedef BOOL (WINAPI *CLOSETOOLHELP32SNAPSHOT)(HANDLE);
-typedef BOOL (WINAPI *HEAP32FIRST)(LPHEAPENTRY32, DWORD, size_t);
-typedef BOOL (WINAPI *HEAP32NEXT)(LPHEAPENTRY32);
-typedef BOOL (WINAPI *HEAP32LIST)(HANDLE, LPHEAPLIST32);
-typedef BOOL (WINAPI *PROCESS32)(HANDLE, LPPROCESSENTRY32);
-typedef BOOL (WINAPI *THREAD32)(HANDLE, LPTHREADENTRY32);
-typedef BOOL (WINAPI *MODULE32)(HANDLE, LPMODULEENTRY32);
-
-#include <lmcons.h>
-#include <lmstats.h>
-#if 1 /* The NET API is Unicode only.  It requires the use of the UNICODE
-       * macro.  When UNICODE is defined LPTSTR becomes LPWSTR.  LMSTR was
-       * was added to the Platform SDK to allow the NET API to be used in
-       * non-Unicode applications provided that Unicode strings were still
-       * used for input.  LMSTR is defined as LPWSTR.
-       */
-typedef NET_API_STATUS (NET_API_FUNCTION * NETSTATGET)
-        (LPWSTR, LPWSTR, DWORD, DWORD, LPBYTE*);
-typedef NET_API_STATUS (NET_API_FUNCTION * NETFREE)(LPBYTE);
-#endif /* 1 */
-#endif /* !OPENSSL_SYS_WINCE */
-
-int RAND_poll(void)
-{
-	MEMORYSTATUS m;
-	HCRYPTPROV hProvider = 0;
-	DWORD w;
-	int good = 0;
-
-	/* Determine the OS version we are on so we can turn off things 
-	 * that do not work properly.
-	 */
-        OSVERSIONINFO osverinfo ;
-        osverinfo.dwOSVersionInfoSize = sizeof(OSVERSIONINFO) ;
-        GetVersionEx( &osverinfo ) ;
-
-#if defined(OPENSSL_SYS_WINCE)
-# if defined(_WIN32_WCE) && _WIN32_WCE>=300
-/* Even though MSDN says _WIN32_WCE>=210, it doesn't seem to be available
- * in commonly available implementations prior 300... */
-	{
-	BYTE buf[64];
-	/* poll the CryptoAPI PRNG */
-	/* The CryptoAPI returns sizeof(buf) bytes of randomness */
-	if (CryptAcquireContextW(&hProvider, NULL, NULL, PROV_RSA_FULL,
-				CRYPT_VERIFYCONTEXT))
-		{
-		if (CryptGenRandom(hProvider, sizeof(buf), buf))
-			RAND_add(buf, sizeof(buf), sizeof(buf));
-		CryptReleaseContext(hProvider, 0); 
-		}
-	}
-# endif
-#else	/* OPENSSL_SYS_WINCE */
-	/*
-	 * None of below libraries are present on Windows CE, which is
-	 * why we #ifndef the whole section. This also excuses us from
-	 * handling the GetProcAddress issue. The trouble is that in
-	 * real Win32 API GetProcAddress is available in ANSI flavor
-	 * only. In WinCE on the other hand GetProcAddress is a macro
-	 * most commonly defined as GetProcAddressW, which accepts
-	 * Unicode argument. If we were to call GetProcAddress under
-	 * WinCE, I'd recommend to either redefine GetProcAddress as
-	 * GetProcAddressA (there seem to be one in common CE spec) or
-	 * implement own shim routine, which would accept ANSI argument
-	 * and expand it to Unicode.
-	 */
-	{
-	/* load functions dynamically - not available on all systems */
-	HMODULE advapi = LoadLibrary(TEXT("ADVAPI32.DLL"));
-	HMODULE kernel = LoadLibrary(TEXT("KERNEL32.DLL"));
-	HMODULE user = NULL;
-	HMODULE netapi = LoadLibrary(TEXT("NETAPI32.DLL"));
-	CRYPTACQUIRECONTEXTW acquire = NULL;
-	CRYPTGENRANDOM gen = NULL;
-	CRYPTRELEASECONTEXT release = NULL;
-	NETSTATGET netstatget = NULL;
-	NETFREE netfree = NULL;
-	BYTE buf[64];
-
-	if (netapi)
-		{
-		netstatget = (NETSTATGET) GetProcAddress(netapi,"NetStatisticsGet");
-		netfree = (NETFREE) GetProcAddress(netapi,"NetApiBufferFree");
-		}
-
-	if (netstatget && netfree)
-		{
-		LPBYTE outbuf;
-		/* NetStatisticsGet() is a Unicode only function
- 		 * STAT_WORKSTATION_0 contains 45 fields and STAT_SERVER_0
-		 * contains 17 fields.  We treat each field as a source of
-		 * one byte of entropy.
-                 */
-
-		if (netstatget(NULL, L"LanmanWorkstation", 0, 0, &outbuf) == 0)
-			{
-			RAND_add(outbuf, sizeof(STAT_WORKSTATION_0), 45);
-			netfree(outbuf);
-			}
-		if (netstatget(NULL, L"LanmanServer", 0, 0, &outbuf) == 0)
-			{
-			RAND_add(outbuf, sizeof(STAT_SERVER_0), 17);
-			netfree(outbuf);
-			}
-		}
-
-	if (netapi)
-		FreeLibrary(netapi);
-
-        /* It appears like this can cause an exception deep within ADVAPI32.DLL
-         * at random times on Windows 2000.  Reported by Jeffrey Altman.  
-         * Only use it on NT.
-	 */
-	/* Wolfgang Marczy <WMarczy@topcall.co.at> reports that
-	 * the RegQueryValueEx call below can hang on NT4.0 (SP6).
-	 * So we don't use this at all for now. */
-#if 0
-        if ( osverinfo.dwPlatformId == VER_PLATFORM_WIN32_NT &&
-		osverinfo.dwMajorVersion < 5)
-		{
-		/* Read Performance Statistics from NT/2000 registry
-		 * The size of the performance data can vary from call
-		 * to call so we must guess the size of the buffer to use
-		 * and increase its size if we get an ERROR_MORE_DATA
-		 * return instead of ERROR_SUCCESS.
-		 */
-		LONG   rc=ERROR_MORE_DATA;
-		char * buf=NULL;
-		DWORD bufsz=0;
-		DWORD length;
-
-		while (rc == ERROR_MORE_DATA)
-			{
-			buf = realloc(buf,bufsz+8192);
-			if (!buf)
-				break;
-			bufsz += 8192;
-
-			length = bufsz;
-			rc = RegQueryValueEx(HKEY_PERFORMANCE_DATA, TEXT("Global"),
-				NULL, NULL, buf, &length);
-			}
-		if (rc == ERROR_SUCCESS)
-			{
-                        /* For entropy count assume only least significant
-			 * byte of each DWORD is random.
-			 */
-			RAND_add(&length, sizeof(length), 0);
-			RAND_add(buf, length, length / 4.0);
-
-			/* Close the Registry Key to allow Windows to cleanup/close
-			 * the open handle
-			 * Note: The 'HKEY_PERFORMANCE_DATA' key is implicitly opened
-			 *       when the RegQueryValueEx above is done.  However, if
-			 *       it is not explicitly closed, it can cause disk
-			 *       partition manipulation problems.
-			 */
-			RegCloseKey(HKEY_PERFORMANCE_DATA);
-			}
-		if (buf)
-			free(buf);
-		}
-#endif
-
-	if (advapi)
-		{
-		/*
-		 * If it's available, then it's available in both ANSI
-		 * and UNICODE flavors even in Win9x, documentation says.
-		 * We favor Unicode...
-		 */
-		acquire = (CRYPTACQUIRECONTEXTW) GetProcAddress(advapi,
-			"CryptAcquireContextW");
-		gen = (CRYPTGENRANDOM) GetProcAddress(advapi,
-			"CryptGenRandom");
-		release = (CRYPTRELEASECONTEXT) GetProcAddress(advapi,
-			"CryptReleaseContext");
-		}
-
-	if (acquire && gen && release)
-		{
-		/* poll the CryptoAPI PRNG */
-                /* The CryptoAPI returns sizeof(buf) bytes of randomness */
-		if (acquire(&hProvider, NULL, NULL, PROV_RSA_FULL,
-			CRYPT_VERIFYCONTEXT))
-			{
-			if (gen(hProvider, sizeof(buf), buf) != 0)
-				{
-				RAND_add(buf, sizeof(buf), 0);
-				good = 1;
-#if 0
-				printf("randomness from PROV_RSA_FULL\n");
-#endif
-				}
-			release(hProvider, 0); 
-			}
-		
-		/* poll the Pentium PRG with CryptoAPI */
-		if (acquire(&hProvider, 0, INTEL_DEF_PROV, PROV_INTEL_SEC, 0))
-			{
-			if (gen(hProvider, sizeof(buf), buf) != 0)
-				{
-				RAND_add(buf, sizeof(buf), sizeof(buf));
-				good = 1;
-#if 0
-				printf("randomness from PROV_INTEL_SEC\n");
-#endif
-				}
-			release(hProvider, 0);
-			}
-		}
-
-        if (advapi)
-		FreeLibrary(advapi);
-
-	if ((osverinfo.dwPlatformId != VER_PLATFORM_WIN32_NT ||
-	     !OPENSSL_isservice()) &&
-	    (user = LoadLibrary(TEXT("USER32.DLL"))))
-		{
-		GETCURSORINFO cursor;
-		GETFOREGROUNDWINDOW win;
-		GETQUEUESTATUS queue;
-
-		win = (GETFOREGROUNDWINDOW) GetProcAddress(user, "GetForegroundWindow");
-		cursor = (GETCURSORINFO) GetProcAddress(user, "GetCursorInfo");
-		queue = (GETQUEUESTATUS) GetProcAddress(user, "GetQueueStatus");
-
-		if (win)
-			{
-			/* window handle */
-			HWND h = win();
-			RAND_add(&h, sizeof(h), 0);
-			}
-		if (cursor)
-			{
-			/* unfortunately, its not safe to call GetCursorInfo()
-			 * on NT4 even though it exists in SP3 (or SP6) and
-			 * higher.
-			 */
-			if ( osverinfo.dwPlatformId == VER_PLATFORM_WIN32_NT &&
-				osverinfo.dwMajorVersion < 5)
-				cursor = 0;
-			}
-		if (cursor)
-			{
-			/* cursor position */
-                        /* assume 2 bytes of entropy */
-			CURSORINFO ci;
-			ci.cbSize = sizeof(CURSORINFO);
-			if (cursor(&ci))
-				RAND_add(&ci, ci.cbSize, 2);
-			}
-
-		if (queue)
-			{
-			/* message queue status */
-                        /* assume 1 byte of entropy */
-			w = queue(QS_ALLEVENTS);
-			RAND_add(&w, sizeof(w), 1);
-			}
-
-		FreeLibrary(user);
-		}
-
-	/* Toolhelp32 snapshot: enumerate processes, threads, modules and heap
-	 * http://msdn.microsoft.com/library/psdk/winbase/toolhelp_5pfd.htm
-	 * (Win 9x and 2000 only, not available on NT)
-	 *
-	 * This seeding method was proposed in Peter Gutmann, Software
-	 * Generation of Practically Strong Random Numbers,
-	 * http://www.usenix.org/publications/library/proceedings/sec98/gutmann.html
-	 * revised version at http://www.cryptoengines.com/~peter/06_random.pdf
-	 * (The assignment of entropy estimates below is arbitrary, but based
-	 * on Peter's analysis the full poll appears to be safe. Additional
-	 * interactive seeding is encouraged.)
-	 */
-
-	if (kernel)
-		{
-		CREATETOOLHELP32SNAPSHOT snap;
-		CLOSETOOLHELP32SNAPSHOT close_snap;
-		HANDLE handle;
-
-		HEAP32FIRST heap_first;
-		HEAP32NEXT heap_next;
-		HEAP32LIST heaplist_first, heaplist_next;
-		PROCESS32 process_first, process_next;
-		THREAD32 thread_first, thread_next;
-		MODULE32 module_first, module_next;
-
-		HEAPLIST32 hlist;
-		HEAPENTRY32 hentry;
-		PROCESSENTRY32 p;
-		THREADENTRY32 t;
-		MODULEENTRY32 m;
-		DWORD stoptime = 0;
-
-		snap = (CREATETOOLHELP32SNAPSHOT)
-			GetProcAddress(kernel, "CreateToolhelp32Snapshot");
-		close_snap = (CLOSETOOLHELP32SNAPSHOT)
-			GetProcAddress(kernel, "CloseToolhelp32Snapshot");
-		heap_first = (HEAP32FIRST) GetProcAddress(kernel, "Heap32First");
-		heap_next = (HEAP32NEXT) GetProcAddress(kernel, "Heap32Next");
-		heaplist_first = (HEAP32LIST) GetProcAddress(kernel, "Heap32ListFirst");
-		heaplist_next = (HEAP32LIST) GetProcAddress(kernel, "Heap32ListNext");
-		process_first = (PROCESS32) GetProcAddress(kernel, "Process32First");
-		process_next = (PROCESS32) GetProcAddress(kernel, "Process32Next");
-		thread_first = (THREAD32) GetProcAddress(kernel, "Thread32First");
-		thread_next = (THREAD32) GetProcAddress(kernel, "Thread32Next");
-		module_first = (MODULE32) GetProcAddress(kernel, "Module32First");
-		module_next = (MODULE32) GetProcAddress(kernel, "Module32Next");
-
-		if (snap && heap_first && heap_next && heaplist_first &&
-			heaplist_next && process_first && process_next &&
-			thread_first && thread_next && module_first &&
-			module_next && (handle = snap(TH32CS_SNAPALL,0))
-			!= INVALID_HANDLE_VALUE)
-			{
-			/* heap list and heap walking */
-                        /* HEAPLIST32 contains 3 fields that will change with
-                         * each entry.  Consider each field a source of 1 byte
-                         * of entropy.
-                         * HEAPENTRY32 contains 5 fields that will change with 
-                         * each entry.  Consider each field a source of 1 byte
-                         * of entropy.
-                         */
-			hlist.dwSize = sizeof(HEAPLIST32);		
-			if (good) stoptime = GetTickCount() + MAXDELAY;
-			if (heaplist_first(handle, &hlist))
-				do
-					{
-					RAND_add(&hlist, hlist.dwSize, 3);
-					hentry.dwSize = sizeof(HEAPENTRY32);
-					if (heap_first(&hentry,
-						hlist.th32ProcessID,
-						hlist.th32HeapID))
-						{
-						int entrycnt = 80;
-						do
-							RAND_add(&hentry,
-								hentry.dwSize, 5);
-						while (heap_next(&hentry)
-							&& --entrycnt > 0);
-						}
-					} while (heaplist_next(handle,
-						&hlist) && GetTickCount() < stoptime);
-
-			/* process walking */
-                        /* PROCESSENTRY32 contains 9 fields that will change
-                         * with each entry.  Consider each field a source of
-                         * 1 byte of entropy.
-                         */
-			p.dwSize = sizeof(PROCESSENTRY32);
-		
-			if (good) stoptime = GetTickCount() + MAXDELAY;
-			if (process_first(handle, &p))
-				do
-					RAND_add(&p, p.dwSize, 9);
-				while (process_next(handle, &p) && GetTickCount() < stoptime);
-
-			/* thread walking */
-                        /* THREADENTRY32 contains 6 fields that will change
-                         * with each entry.  Consider each field a source of
-                         * 1 byte of entropy.
-                         */
-			t.dwSize = sizeof(THREADENTRY32);
-			if (good) stoptime = GetTickCount() + MAXDELAY;
-			if (thread_first(handle, &t))
-				do
-					RAND_add(&t, t.dwSize, 6);
-				while (thread_next(handle, &t) && GetTickCount() < stoptime);
-
-			/* module walking */
-                        /* MODULEENTRY32 contains 9 fields that will change
-                         * with each entry.  Consider each field a source of
-                         * 1 byte of entropy.
-                         */
-			m.dwSize = sizeof(MODULEENTRY32);
-			if (good) stoptime = GetTickCount() + MAXDELAY;
-			if (module_first(handle, &m))
-				do
-					RAND_add(&m, m.dwSize, 9);
-				while (module_next(handle, &m)
-					       	&& (GetTickCount() < stoptime));
-			if (close_snap)
-				close_snap(handle);
-			else
-				CloseHandle(handle);
-
-			}
-
-		FreeLibrary(kernel);
-		}
-	}
-#endif /* !OPENSSL_SYS_WINCE */
-
-	/* timer data */
-	readtimer();
-	
-	/* memory usage statistics */
-	GlobalMemoryStatus(&m);
-	RAND_add(&m, sizeof(m), 1);
-
-	/* process ID */
-	w = GetCurrentProcessId();
-	RAND_add(&w, sizeof(w), 1);
-
-#if 0
-	printf("Exiting RAND_poll\n");
-#endif
-
-	return(1);
-}
-
-int RAND_event(UINT iMsg, WPARAM wParam, LPARAM lParam)
-        {
-        double add_entropy=0;
-
-        switch (iMsg)
-                {
-        case WM_KEYDOWN:
-                        {
-                        static WPARAM key;
-                        if (key != wParam)
-                                add_entropy = 0.05;
-                        key = wParam;
-                        }
-                        break;
-	case WM_MOUSEMOVE:
-                        {
-                        static int lastx,lasty,lastdx,lastdy;
-                        int x,y,dx,dy;
-
-                        x=LOWORD(lParam);
-                        y=HIWORD(lParam);
-                        dx=lastx-x;
-                        dy=lasty-y;
-                        if (dx != 0 && dy != 0 && dx-lastdx != 0 && dy-lastdy != 0)
-                                add_entropy=.2;
-                        lastx=x, lasty=y;
-                        lastdx=dx, lastdy=dy;
-                        }
-		break;
-		}
-
-	readtimer();
-        RAND_add(&iMsg, sizeof(iMsg), add_entropy);
-	RAND_add(&wParam, sizeof(wParam), 0);
-	RAND_add(&lParam, sizeof(lParam), 0);
- 
-	return (RAND_status());
-	}
-
-
-void RAND_screen(void) /* function available for backward compatibility */
-{
-	RAND_poll();
-	readscreen();
-}
-
-
-/* feed timing information to the PRNG */
-static void readtimer(void)
-{
-	DWORD w;
-	LARGE_INTEGER l;
-	static int have_perfc = 1;
-#if defined(_MSC_VER) && defined(_M_X86)
-	static int have_tsc = 1;
-	DWORD cyclecount;
-
-	if (have_tsc) {
-	  __try {
-	    __asm {
-	      _emit 0x0f
-	      _emit 0x31
-	      mov cyclecount, eax
-	      }
-	    RAND_add(&cyclecount, sizeof(cyclecount), 1);
-	  } __except(EXCEPTION_EXECUTE_HANDLER) {
-	    have_tsc = 0;
-	  }
-	}
-#else
-# define have_tsc 0
-#endif
-
-	if (have_perfc) {
-	  if (QueryPerformanceCounter(&l) == 0)
-	    have_perfc = 0;
-	  else
-	    RAND_add(&l, sizeof(l), 0);
-	}
-
-	if (!have_tsc && !have_perfc) {
-	  w = GetTickCount();
-	  RAND_add(&w, sizeof(w), 0);
-	}
-}
-
-/* feed screen contents to PRNG */
-/*****************************************************************************
- *
- * Created 960901 by Gertjan van Oosten, gertjan@West.NL, West Consulting B.V.
- *
- * Code adapted from
- * <URL:http://support.microsoft.com/default.aspx?scid=kb;[LN];97193>;
- * the original copyright message is:
- *
- *   (C) Copyright Microsoft Corp. 1993.  All rights reserved.
- *
- *   You have a royalty-free right to use, modify, reproduce and
- *   distribute the Sample Files (and/or any modified version) in
- *   any way you find useful, provided that you agree that
- *   Microsoft has no warranty obligations or liability for any
- *   Sample Application Files which are modified.
- */
-
-static void readscreen(void)
-{
-#if !defined(OPENSSL_SYS_WINCE) && !defined(OPENSSL_SYS_WIN32_CYGWIN)
-  HDC		hScrDC;		/* screen DC */
-  HDC		hMemDC;		/* memory DC */
-  HBITMAP	hBitmap;	/* handle for our bitmap */
-  HBITMAP	hOldBitmap;	/* handle for previous bitmap */
-  BITMAP	bm;		/* bitmap properties */
-  unsigned int	size;		/* size of bitmap */
-  char		*bmbits;	/* contents of bitmap */
-  int		w;		/* screen width */
-  int		h;		/* screen height */
-  int		y;		/* y-coordinate of screen lines to grab */
-  int		n = 16;		/* number of screen lines to grab at a time */
-
-  if (GetVersion() >= 0x80000000 || !OPENSSL_isservice())
-    return;
-
-  /* Create a screen DC and a memory DC compatible to screen DC */
-  hScrDC = CreateDC(TEXT("DISPLAY"), NULL, NULL, NULL);
-  hMemDC = CreateCompatibleDC(hScrDC);
-
-  /* Get screen resolution */
-  w = GetDeviceCaps(hScrDC, HORZRES);
-  h = GetDeviceCaps(hScrDC, VERTRES);
-
-  /* Create a bitmap compatible with the screen DC */
-  hBitmap = CreateCompatibleBitmap(hScrDC, w, n);
-
-  /* Select new bitmap into memory DC */
-  hOldBitmap = SelectObject(hMemDC, hBitmap);
-
-  /* Get bitmap properties */
-  GetObject(hBitmap, sizeof(BITMAP), (LPSTR)&bm);
-  size = (unsigned int)bm.bmWidthBytes * bm.bmHeight * bm.bmPlanes;
-
-  bmbits = OPENSSL_malloc(size);
-  if (bmbits) {
-    /* Now go through the whole screen, repeatedly grabbing n lines */
-    for (y = 0; y < h-n; y += n)
-    	{
-	unsigned char md[MD_DIGEST_LENGTH];
-
-	/* Bitblt screen DC to memory DC */
-	BitBlt(hMemDC, 0, 0, w, n, hScrDC, 0, y, SRCCOPY);
-
-	/* Copy bitmap bits from memory DC to bmbits */
-	GetBitmapBits(hBitmap, size, bmbits);
-
-	/* Get the hash of the bitmap */
-	MD(bmbits,size,md);
-
-	/* Seed the random generator with the hash value */
-	RAND_add(md, MD_DIGEST_LENGTH, 0);
-	}
-
-    OPENSSL_free(bmbits);
-  }
-
-  /* Select old bitmap back into memory DC */
-  hBitmap = SelectObject(hMemDC, hOldBitmap);
-
-  /* Clean up */
-  DeleteObject(hBitmap);
-  DeleteDC(hMemDC);
-  DeleteDC(hScrDC);
-#endif /* !OPENSSL_SYS_WINCE */
-}
-
-#endif
diff --git a/crypto/openssl/crypto/rand/randfile.c b/crypto/openssl/crypto/rand/randfile.c
deleted file mode 100644
index d69bdf8b8a04..000000000000
--- a/crypto/openssl/crypto/rand/randfile.c
+++ /dev/null
@@ -1,285 +0,0 @@
-/* crypto/rand/randfile.c */
-/* Copyright (C) 1995-1998 Eric Young (eay@cryptsoft.com)
- * All rights reserved.
- *
- * This package is an SSL implementation written
- * by Eric Young (eay@cryptsoft.com).
- * The implementation was written so as to conform with Netscapes SSL.
- * 
- * This library is free for commercial and non-commercial use as long as
- * the following conditions are aheared to.  The following conditions
- * apply to all code found in this distribution, be it the RC4, RSA,
- * lhash, DES, etc., code; not just the SSL code.  The SSL documentation
- * included with this distribution is covered by the same copyright terms
- * except that the holder is Tim Hudson (tjh@cryptsoft.com).
- * 
- * Copyright remains Eric Young's, and as such any Copyright notices in
- * the code are not to be removed.
- * If this package is used in a product, Eric Young should be given attribution
- * as the author of the parts of the library used.
- * This can be in the form of a textual message at program startup or
- * in documentation (online or textual) provided with the package.
- * 
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions
- * are met:
- * 1. Redistributions of source code must retain the copyright
- *    notice, this list of conditions and the following disclaimer.
- * 2. Redistributions in binary form must reproduce the above copyright
- *    notice, this list of conditions and the following disclaimer in the
- *    documentation and/or other materials provided with the distribution.
- * 3. All advertising materials mentioning features or use of this software
- *    must display the following acknowledgement:
- *    "This product includes cryptographic software written by
- *     Eric Young (eay@cryptsoft.com)"
- *    The word 'cryptographic' can be left out if the rouines from the library
- *    being used are not cryptographic related :-).
- * 4. If you include any Windows specific code (or a derivative thereof) from 
- *    the apps directory (application code) you must include an acknowledgement:
- *    "This product includes software written by Tim Hudson (tjh@cryptsoft.com)"
- * 
- * THIS SOFTWARE IS PROVIDED BY ERIC YOUNG ``AS IS'' AND
- * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
- * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
- * ARE DISCLAIMED.  IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE
- * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
- * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
- * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
- * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
- * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
- * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
- * SUCH DAMAGE.
- * 
- * The licence and distribution terms for any publically available version or
- * derivative of this code cannot be changed.  i.e. this code cannot simply be
- * copied and put under another distribution licence
- * [including the GNU Public Licence.]
- */
-
-/* We need to define this to get macros like S_IFBLK and S_IFCHR */
-#define _XOPEN_SOURCE 500
-
-#include <errno.h>
-#include <stdio.h>
-#include <stdlib.h>
-#include <string.h>
-
-#include "e_os.h"
-#include <openssl/crypto.h>
-#include <openssl/rand.h>
-#include <openssl/buffer.h>
-
-#ifdef OPENSSL_SYS_VMS
-#include <unixio.h>
-#endif
-#ifndef NO_SYS_TYPES_H
-# include <sys/types.h>
-#endif
-#ifdef MAC_OS_pre_X
-# include <stat.h>
-#else
-# include <sys/stat.h>
-#endif
-
-#undef BUFSIZE
-#define BUFSIZE	1024
-#define RAND_DATA 1024
-
-/* #define RFILE ".rnd" - defined in ../../e_os.h */
-
-/* Note that these functions are intended for seed files only.
- * Entropy devices and EGD sockets are handled in rand_unix.c */
-
-int RAND_load_file(const char *file, long bytes)
-	{
-	/* If bytes >= 0, read up to 'bytes' bytes.
-	 * if bytes == -1, read complete file. */
-
-	MS_STATIC unsigned char buf[BUFSIZE];
-	struct stat sb;
-	int i,ret=0,n;
-	FILE *in;
-
-	if (file == NULL) return(0);
-
-	i=stat(file,&sb);
-	/* If the state fails, put some crap in anyway */
-	RAND_add(&sb,sizeof(sb),0.0);
-	if (i < 0) return(0);
-	if (bytes == 0) return(ret);
-
-	in=fopen(file,"rb");
-	if (in == NULL) goto err;
-#if defined(S_IFBLK) && defined(S_IFCHR)
-	if (sb.st_mode & (S_IFBLK | S_IFCHR)) {
-	  /* this file is a device. we don't want read an infinite number
-	   * of bytes from a random device, nor do we want to use buffered
-	   * I/O because we will waste system entropy. 
-	   */
-	  bytes = (bytes == -1) ? 2048 : bytes; /* ok, is 2048 enough? */
-	  setvbuf(in, NULL, _IONBF, 0); /* don't do buffered reads */
-	}
-#endif
-	for (;;)
-		{
-		if (bytes > 0)
-			n = (bytes < BUFSIZE)?(int)bytes:BUFSIZE;
-		else
-			n = BUFSIZE;
-		i=fread(buf,1,n,in);
-		if (i <= 0) break;
-		/* even if n != i, use the full array */
-		RAND_add(buf,n,(double)i);
-		ret+=i;
-		if (bytes > 0)
-			{
-			bytes-=n;
-			if (bytes <= 0) break;
-			}
-		}
-	fclose(in);
-	OPENSSL_cleanse(buf,BUFSIZE);
-err:
-	return(ret);
-	}
-
-int RAND_write_file(const char *file)
-	{
-	unsigned char buf[BUFSIZE];
-	int i,ret=0,rand_err=0;
-	FILE *out = NULL;
-	int n;
-	struct stat sb;
-	
-	i=stat(file,&sb);
-	if (i != -1) { 
-#if defined(S_IFBLK) && defined(S_IFCHR)
-	  if (sb.st_mode & (S_IFBLK | S_IFCHR)) {
-	    /* this file is a device. we don't write back to it. 
-	     * we "succeed" on the assumption this is some sort 
-	     * of random device. Otherwise attempting to write to 
-	     * and chmod the device causes problems.
-	     */
-	    return(1); 
-	  }
-#endif
-	}
-
-#if defined(O_CREAT) && !defined(OPENSSL_SYS_WIN32)
-	{
-	/* For some reason Win32 can't write to files created this way */
-	
-	/* chmod(..., 0600) is too late to protect the file,
-	 * permissions should be restrictive from the start */
-	int fd = open(file, O_CREAT, 0600);
-	if (fd != -1)
-		out = fdopen(fd, "wb");
-	}
-#endif
-	if (out == NULL)
-		out = fopen(file,"wb");
-	if (out == NULL) goto err;
-
-#ifndef NO_CHMOD
-	chmod(file,0600);
-#endif
-	n=RAND_DATA;
-	for (;;)
-		{
-		i=(n > BUFSIZE)?BUFSIZE:n;
-		n-=BUFSIZE;
-		if (RAND_bytes(buf,i) <= 0)
-			rand_err=1;
-		i=fwrite(buf,1,i,out);
-		if (i <= 0)
-			{
-			ret=0;
-			break;
-			}
-		ret+=i;
-		if (n <= 0) break;
-                }
-#ifdef OPENSSL_SYS_VMS
-	/* Try to delete older versions of the file, until there aren't
-	   any */
-	{
-	char *tmpf;
-
-	tmpf = OPENSSL_malloc(strlen(file) + 4);  /* to add ";-1" and a nul */
-	if (tmpf)
-		{
-		strcpy(tmpf, file);
-		strcat(tmpf, ";-1");
-		while(delete(tmpf) == 0)
-			;
-		rename(file,";1"); /* Make sure it's version 1, or we
-				      will reach the limit (32767) at
-				      some point... */
-		}
-	}
-#endif /* OPENSSL_SYS_VMS */
-
-	fclose(out);
-	OPENSSL_cleanse(buf,BUFSIZE);
-err:
-	return (rand_err ? -1 : ret);
-	}
-
-const char *RAND_file_name(char *buf, size_t size)
-	{
-	char *s=NULL;
-	int ok = 0;
-#ifdef __OpenBSD__
-	struct stat sb;
-#endif
-
-	if (OPENSSL_issetugid() == 0)
-		s=getenv("RANDFILE");
-	if (s != NULL && *s && strlen(s) + 1 < size)
-		{
-		if (BUF_strlcpy(buf,s,size) >= size)
-			return NULL;
-		}
-	else
-		{
-		if (OPENSSL_issetugid() == 0)
-			s=getenv("HOME");
-#ifdef DEFAULT_HOME
-		if (s == NULL)
-			{
-			s = DEFAULT_HOME;
-			}
-#endif
-		if (s && *s && strlen(s)+strlen(RFILE)+2 < size)
-			{
-			BUF_strlcpy(buf,s,size);
-#ifndef OPENSSL_SYS_VMS
-			BUF_strlcat(buf,"/",size);
-#endif
-			BUF_strlcat(buf,RFILE,size);
-			ok = 1;
-			}
-		else
-		  	buf[0] = '\0'; /* no file name */
-		}
-
-#ifdef __OpenBSD__
-	/* given that all random loads just fail if the file can't be 
-	 * seen on a stat, we stat the file we're returning, if it
-	 * fails, use /dev/arandom instead. this allows the user to 
-	 * use their own source for good random data, but defaults
-	 * to something hopefully decent if that isn't available. 
-	 */
-
-	if (!ok)
-		if (BUF_strlcpy(buf,"/dev/arandom",size) >= size) {
-			return(NULL);
-		}	
-	if (stat(buf,&sb) == -1)
-		if (BUF_strlcpy(buf,"/dev/arandom",size) >= size) {
-			return(NULL);
-		}	
-
-#endif
-	return(buf);
-	}
diff --git a/crypto/openssl/crypto/rand/randtest.c b/crypto/openssl/crypto/rand/randtest.c
deleted file mode 100644
index 9e92a70b033c..000000000000
--- a/crypto/openssl/crypto/rand/randtest.c
+++ /dev/null
@@ -1,219 +0,0 @@
-/* crypto/rand/randtest.c */
-/* Copyright (C) 1995-1998 Eric Young (eay@cryptsoft.com)
- * All rights reserved.
- *
- * This package is an SSL implementation written
- * by Eric Young (eay@cryptsoft.com).
- * The implementation was written so as to conform with Netscapes SSL.
- * 
- * This library is free for commercial and non-commercial use as long as
- * the following conditions are aheared to.  The following conditions
- * apply to all code found in this distribution, be it the RC4, RSA,
- * lhash, DES, etc., code; not just the SSL code.  The SSL documentation
- * included with this distribution is covered by the same copyright terms
- * except that the holder is Tim Hudson (tjh@cryptsoft.com).
- * 
- * Copyright remains Eric Young's, and as such any Copyright notices in
- * the code are not to be removed.
- * If this package is used in a product, Eric Young should be given attribution
- * as the author of the parts of the library used.
- * This can be in the form of a textual message at program startup or
- * in documentation (online or textual) provided with the package.
- * 
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions
- * are met:
- * 1. Redistributions of source code must retain the copyright
- *    notice, this list of conditions and the following disclaimer.
- * 2. Redistributions in binary form must reproduce the above copyright
- *    notice, this list of conditions and the following disclaimer in the
- *    documentation and/or other materials provided with the distribution.
- * 3. All advertising materials mentioning features or use of this software
- *    must display the following acknowledgement:
- *    "This product includes cryptographic software written by
- *     Eric Young (eay@cryptsoft.com)"
- *    The word 'cryptographic' can be left out if the rouines from the library
- *    being used are not cryptographic related :-).
- * 4. If you include any Windows specific code (or a derivative thereof) from 
- *    the apps directory (application code) you must include an acknowledgement:
- *    "This product includes software written by Tim Hudson (tjh@cryptsoft.com)"
- * 
- * THIS SOFTWARE IS PROVIDED BY ERIC YOUNG ``AS IS'' AND
- * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
- * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
- * ARE DISCLAIMED.  IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE
- * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
- * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
- * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
- * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
- * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
- * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
- * SUCH DAMAGE.
- * 
- * The licence and distribution terms for any publically available version or
- * derivative of this code cannot be changed.  i.e. this code cannot simply be
- * copied and put under another distribution licence
- * [including the GNU Public Licence.]
- */
-
-#include <stdio.h>
-#include <stdlib.h>
-#include <openssl/rand.h>
-
-#include "../e_os.h"
-
-/* some FIPS 140-1 random number test */
-/* some simple tests */
-
-int main(int argc,char **argv)
-	{
-	unsigned char buf[2500];
-	int i,j,k,s,sign,nsign,err=0;
-	unsigned long n1;
-	unsigned long n2[16];
-	unsigned long runs[2][34];
-	/*double d; */
-	long d;
-
-	i = RAND_pseudo_bytes(buf,2500);
-	if (i < 0)
-		{
-		printf ("init failed, the rand method is not properly installed\n");
-		err++;
-		goto err;
-		}
-
-	n1=0;
-	for (i=0; i<16; i++) n2[i]=0;
-	for (i=0; i<34; i++) runs[0][i]=runs[1][i]=0;
-
-	/* test 1 and 2 */
-	sign=0;
-	nsign=0;
-	for (i=0; i<2500; i++)
-		{
-		j=buf[i];
-
-		n2[j&0x0f]++;
-		n2[(j>>4)&0x0f]++;
-
-		for (k=0; k<8; k++)
-			{
-			s=(j&0x01);
-			if (s == sign)
-				nsign++;
-			else
-				{
-				if (nsign > 34) nsign=34;
-				if (nsign != 0)
-					{
-					runs[sign][nsign-1]++;
-					if (nsign > 6)
-						runs[sign][5]++;
-					}
-				sign=s;
-				nsign=1;
-				}
-
-			if (s) n1++;
-			j>>=1;
-			}
-		}
-		if (nsign > 34) nsign=34;
-		if (nsign != 0) runs[sign][nsign-1]++;
-
-	/* test 1 */
-	if (!((9654 < n1) && (n1 < 10346)))
-		{
-		printf("test 1 failed, X=%lu\n",n1);
-		err++;
-		}
-	printf("test 1 done\n");
-
-	/* test 2 */
-#ifdef undef
-	d=0;
-	for (i=0; i<16; i++)
-		d+=n2[i]*n2[i];
-	d=d*16.0/5000.0-5000.0;
-	if (!((1.03 < d) && (d < 57.4)))
-		{
-		printf("test 2 failed, X=%.2f\n",d);
-		err++;
-		}
-#endif
-	d=0;
-	for (i=0; i<16; i++)
-		d+=n2[i]*n2[i];
-	d=(d*8)/25-500000;
-	if (!((103 < d) && (d < 5740)))
-		{
-		printf("test 2 failed, X=%ld.%02ld\n",d/100L,d%100L);
-		err++;
-		}
-	printf("test 2 done\n");
-
-	/* test 3 */
-	for (i=0; i<2; i++)
-		{
-		if (!((2267 < runs[i][0]) && (runs[i][0] < 2733)))
-			{
-			printf("test 3 failed, bit=%d run=%d num=%lu\n",
-				i,1,runs[i][0]);
-			err++;
-			}
-		if (!((1079 < runs[i][1]) && (runs[i][1] < 1421)))
-			{
-			printf("test 3 failed, bit=%d run=%d num=%lu\n",
-				i,2,runs[i][1]);
-			err++;
-			}
-		if (!(( 502 < runs[i][2]) && (runs[i][2] <  748)))
-			{
-			printf("test 3 failed, bit=%d run=%d num=%lu\n",
-				i,3,runs[i][2]);
-			err++;
-			}
-		if (!(( 223 < runs[i][3]) && (runs[i][3] <  402)))
-			{
-			printf("test 3 failed, bit=%d run=%d num=%lu\n",
-				i,4,runs[i][3]);
-			err++;
-			}
-		if (!((  90 < runs[i][4]) && (runs[i][4] <  223)))
-			{
-			printf("test 3 failed, bit=%d run=%d num=%lu\n",
-				i,5,runs[i][4]);
-			err++;
-			}
-		if (!((  90 < runs[i][5]) && (runs[i][5] <  223)))
-			{
-			printf("test 3 failed, bit=%d run=%d num=%lu\n",
-				i,6,runs[i][5]);
-			err++;
-			}
-		}
-	printf("test 3 done\n");
-	
-	/* test 4 */
-	if (runs[0][33] != 0)
-		{
-		printf("test 4 failed, bit=%d run=%d num=%lu\n",
-			0,34,runs[0][33]);
-		err++;
-		}
-	if (runs[1][33] != 0)
-		{
-		printf("test 4 failed, bit=%d run=%d num=%lu\n",
-			1,34,runs[1][33]);
-		err++;
-		}
-	printf("test 4 done\n");
- err:
-	err=((err)?1:0);
-#ifdef OPENSSL_SYS_NETWARE
-    if (err) printf("ERROR: %d\n", err);
-#endif
-	EXIT(err);
-	return(err);
-	}
diff --git a/crypto/openssl/crypto/rc2/Makefile b/crypto/openssl/crypto/rc2/Makefile
deleted file mode 100644
index 73eac347e7fd..000000000000
--- a/crypto/openssl/crypto/rc2/Makefile
+++ /dev/null
@@ -1,86 +0,0 @@
-#
-# OpenSSL/crypto/rc2/Makefile
-#
-
-DIR=	rc2
-TOP=	../..
-CC=	cc
-INCLUDES=
-CFLAG=-g
-MAKEFILE=	Makefile
-AR=		ar r
-
-CFLAGS= $(INCLUDES) $(CFLAG)
-
-GENERAL=Makefile
-TEST=rc2test.c
-APPS=
-
-LIB=$(TOP)/libcrypto.a
-LIBSRC=rc2_ecb.c rc2_skey.c rc2_cbc.c rc2cfb64.c rc2ofb64.c
-LIBOBJ=rc2_ecb.o rc2_skey.o rc2_cbc.o rc2cfb64.o rc2ofb64.o
-
-SRC= $(LIBSRC)
-
-EXHEADER= rc2.h
-HEADER=	rc2_locl.h $(EXHEADER)
-
-ALL=    $(GENERAL) $(SRC) $(HEADER)
-
-top:
-	(cd ../..; $(MAKE) DIRS=crypto SDIRS=$(DIR) sub_all)
-
-all:	lib
-
-lib:	$(LIBOBJ)
-	$(AR) $(LIB) $(LIBOBJ)
-	$(RANLIB) $(LIB) || echo Never mind.
-	@touch lib
-
-files:
-	$(PERL) $(TOP)/util/files.pl Makefile >> $(TOP)/MINFO
-
-links:
-	@$(PERL) $(TOP)/util/mklink.pl ../../include/openssl $(EXHEADER)
-	@$(PERL) $(TOP)/util/mklink.pl ../../test $(TEST)
-	@$(PERL) $(TOP)/util/mklink.pl ../../apps $(APPS)
-
-install:
-	@[ -n "$(INSTALLTOP)" ] # should be set by top Makefile...
-	@headerlist="$(EXHEADER)"; for i in $$headerlist ; \
-	do  \
-	(cp $$i $(INSTALL_PREFIX)$(INSTALLTOP)/include/openssl/$$i; \
-	chmod 644 $(INSTALL_PREFIX)$(INSTALLTOP)/include/openssl/$$i ); \
-	done;
-
-tags:
-	ctags $(SRC)
-
-tests:
-
-lint:
-	lint -DLINT $(INCLUDES) $(SRC)>fluff
-
-depend:
-	@[ -n "$(MAKEDEPEND)" ] # should be set by upper Makefile...
-	$(MAKEDEPEND) -- $(CFLAG) $(INCLUDES) $(DEPFLAG) -- $(PROGS) $(LIBSRC)
-
-dclean:
-	$(PERL) -pe 'if (/^# DO NOT DELETE THIS LINE/) {print; exit(0);}' $(MAKEFILE) >Makefile.new
-	mv -f Makefile.new $(MAKEFILE)
-
-clean:
-	rm -f *.o *.obj lib tags core .pure .nfs* *.old *.bak fluff
-
-# DO NOT DELETE THIS LINE -- make depend depends on it.
-
-rc2_cbc.o: ../../include/openssl/opensslconf.h ../../include/openssl/rc2.h
-rc2_cbc.o: rc2_cbc.c rc2_locl.h
-rc2_ecb.o: ../../include/openssl/opensslconf.h ../../include/openssl/opensslv.h
-rc2_ecb.o: ../../include/openssl/rc2.h rc2_ecb.c rc2_locl.h
-rc2_skey.o: ../../include/openssl/opensslconf.h ../../include/openssl/rc2.h
-rc2_skey.o: rc2_locl.h rc2_skey.c
-rc2cfb64.o: ../../include/openssl/opensslconf.h ../../include/openssl/rc2.h
-rc2cfb64.o: rc2_locl.h rc2cfb64.c
-rc2ofb64.o: ../../include/openssl/opensslconf.h ../../include/openssl/rc2.h
-rc2ofb64.o: rc2_locl.h rc2ofb64.c
diff --git a/crypto/openssl/crypto/rc2/rc2.h b/crypto/openssl/crypto/rc2/rc2.h
deleted file mode 100644
index 34c83623172f..000000000000
--- a/crypto/openssl/crypto/rc2/rc2.h
+++ /dev/null
@@ -1,101 +0,0 @@
-/* crypto/rc2/rc2.h */
-/* Copyright (C) 1995-1997 Eric Young (eay@cryptsoft.com)
- * All rights reserved.
- *
- * This package is an SSL implementation written
- * by Eric Young (eay@cryptsoft.com).
- * The implementation was written so as to conform with Netscapes SSL.
- * 
- * This library is free for commercial and non-commercial use as long as
- * the following conditions are aheared to.  The following conditions
- * apply to all code found in this distribution, be it the RC4, RSA,
- * lhash, DES, etc., code; not just the SSL code.  The SSL documentation
- * included with this distribution is covered by the same copyright terms
- * except that the holder is Tim Hudson (tjh@cryptsoft.com).
- * 
- * Copyright remains Eric Young's, and as such any Copyright notices in
- * the code are not to be removed.
- * If this package is used in a product, Eric Young should be given attribution
- * as the author of the parts of the library used.
- * This can be in the form of a textual message at program startup or
- * in documentation (online or textual) provided with the package.
- * 
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions
- * are met:
- * 1. Redistributions of source code must retain the copyright
- *    notice, this list of conditions and the following disclaimer.
- * 2. Redistributions in binary form must reproduce the above copyright
- *    notice, this list of conditions and the following disclaimer in the
- *    documentation and/or other materials provided with the distribution.
- * 3. All advertising materials mentioning features or use of this software
- *    must display the following acknowledgement:
- *    "This product includes cryptographic software written by
- *     Eric Young (eay@cryptsoft.com)"
- *    The word 'cryptographic' can be left out if the rouines from the library
- *    being used are not cryptographic related :-).
- * 4. If you include any Windows specific code (or a derivative thereof) from 
- *    the apps directory (application code) you must include an acknowledgement:
- *    "This product includes software written by Tim Hudson (tjh@cryptsoft.com)"
- * 
- * THIS SOFTWARE IS PROVIDED BY ERIC YOUNG ``AS IS'' AND
- * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
- * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
- * ARE DISCLAIMED.  IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE
- * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
- * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
- * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
- * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
- * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
- * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
- * SUCH DAMAGE.
- * 
- * The licence and distribution terms for any publically available version or
- * derivative of this code cannot be changed.  i.e. this code cannot simply be
- * copied and put under another distribution licence
- * [including the GNU Public Licence.]
- */
-
-#ifndef HEADER_RC2_H
-#define HEADER_RC2_H
-
-#include <openssl/opensslconf.h> /* OPENSSL_NO_RC2, RC2_INT */
-#ifdef OPENSSL_NO_RC2
-#error RC2 is disabled.
-#endif
-
-#define RC2_ENCRYPT	1
-#define RC2_DECRYPT	0
-
-#define RC2_BLOCK	8
-#define RC2_KEY_LENGTH	16
-
-#ifdef  __cplusplus
-extern "C" {
-#endif
-
-typedef struct rc2_key_st
-	{
-	RC2_INT data[64];
-	} RC2_KEY;
-
- 
-void RC2_set_key(RC2_KEY *key, int len, const unsigned char *data,int bits);
-void RC2_ecb_encrypt(const unsigned char *in,unsigned char *out,RC2_KEY *key,
-		     int enc);
-void RC2_encrypt(unsigned long *data,RC2_KEY *key);
-void RC2_decrypt(unsigned long *data,RC2_KEY *key);
-void RC2_cbc_encrypt(const unsigned char *in, unsigned char *out, long length,
-	RC2_KEY *ks, unsigned char *iv, int enc);
-void RC2_cfb64_encrypt(const unsigned char *in, unsigned char *out,
-		       long length, RC2_KEY *schedule, unsigned char *ivec,
-		       int *num, int enc);
-void RC2_ofb64_encrypt(const unsigned char *in, unsigned char *out,
-		       long length, RC2_KEY *schedule, unsigned char *ivec,
-		       int *num);
-
-#ifdef  __cplusplus
-}
-#endif
-
-#endif
diff --git a/crypto/openssl/crypto/rc2/rc2_cbc.c b/crypto/openssl/crypto/rc2/rc2_cbc.c
deleted file mode 100644
index 74f48d3d87b3..000000000000
--- a/crypto/openssl/crypto/rc2/rc2_cbc.c
+++ /dev/null
@@ -1,226 +0,0 @@
-/* crypto/rc2/rc2_cbc.c */
-/* Copyright (C) 1995-1998 Eric Young (eay@cryptsoft.com)
- * All rights reserved.
- *
- * This package is an SSL implementation written
- * by Eric Young (eay@cryptsoft.com).
- * The implementation was written so as to conform with Netscapes SSL.
- * 
- * This library is free for commercial and non-commercial use as long as
- * the following conditions are aheared to.  The following conditions
- * apply to all code found in this distribution, be it the RC4, RSA,
- * lhash, DES, etc., code; not just the SSL code.  The SSL documentation
- * included with this distribution is covered by the same copyright terms
- * except that the holder is Tim Hudson (tjh@cryptsoft.com).
- * 
- * Copyright remains Eric Young's, and as such any Copyright notices in
- * the code are not to be removed.
- * If this package is used in a product, Eric Young should be given attribution
- * as the author of the parts of the library used.
- * This can be in the form of a textual message at program startup or
- * in documentation (online or textual) provided with the package.
- * 
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions
- * are met:
- * 1. Redistributions of source code must retain the copyright
- *    notice, this list of conditions and the following disclaimer.
- * 2. Redistributions in binary form must reproduce the above copyright
- *    notice, this list of conditions and the following disclaimer in the
- *    documentation and/or other materials provided with the distribution.
- * 3. All advertising materials mentioning features or use of this software
- *    must display the following acknowledgement:
- *    "This product includes cryptographic software written by
- *     Eric Young (eay@cryptsoft.com)"
- *    The word 'cryptographic' can be left out if the rouines from the library
- *    being used are not cryptographic related :-).
- * 4. If you include any Windows specific code (or a derivative thereof) from 
- *    the apps directory (application code) you must include an acknowledgement:
- *    "This product includes software written by Tim Hudson (tjh@cryptsoft.com)"
- * 
- * THIS SOFTWARE IS PROVIDED BY ERIC YOUNG ``AS IS'' AND
- * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
- * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
- * ARE DISCLAIMED.  IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE
- * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
- * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
- * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
- * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
- * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
- * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
- * SUCH DAMAGE.
- * 
- * The licence and distribution terms for any publically available version or
- * derivative of this code cannot be changed.  i.e. this code cannot simply be
- * copied and put under another distribution licence
- * [including the GNU Public Licence.]
- */
-
-#include <openssl/rc2.h>
-#include "rc2_locl.h"
-
-void RC2_cbc_encrypt(const unsigned char *in, unsigned char *out, long length,
-	     RC2_KEY *ks, unsigned char *iv, int encrypt)
-	{
-	register unsigned long tin0,tin1;
-	register unsigned long tout0,tout1,xor0,xor1;
-	register long l=length;
-	unsigned long tin[2];
-
-	if (encrypt)
-		{
-		c2l(iv,tout0);
-		c2l(iv,tout1);
-		iv-=8;
-		for (l-=8; l>=0; l-=8)
-			{
-			c2l(in,tin0);
-			c2l(in,tin1);
-			tin0^=tout0;
-			tin1^=tout1;
-			tin[0]=tin0;
-			tin[1]=tin1;
-			RC2_encrypt(tin,ks);
-			tout0=tin[0]; l2c(tout0,out);
-			tout1=tin[1]; l2c(tout1,out);
-			}
-		if (l != -8)
-			{
-			c2ln(in,tin0,tin1,l+8);
-			tin0^=tout0;
-			tin1^=tout1;
-			tin[0]=tin0;
-			tin[1]=tin1;
-			RC2_encrypt(tin,ks);
-			tout0=tin[0]; l2c(tout0,out);
-			tout1=tin[1]; l2c(tout1,out);
-			}
-		l2c(tout0,iv);
-		l2c(tout1,iv);
-		}
-	else
-		{
-		c2l(iv,xor0);
-		c2l(iv,xor1);
-		iv-=8;
-		for (l-=8; l>=0; l-=8)
-			{
-			c2l(in,tin0); tin[0]=tin0;
-			c2l(in,tin1); tin[1]=tin1;
-			RC2_decrypt(tin,ks);
-			tout0=tin[0]^xor0;
-			tout1=tin[1]^xor1;
-			l2c(tout0,out);
-			l2c(tout1,out);
-			xor0=tin0;
-			xor1=tin1;
-			}
-		if (l != -8)
-			{
-			c2l(in,tin0); tin[0]=tin0;
-			c2l(in,tin1); tin[1]=tin1;
-			RC2_decrypt(tin,ks);
-			tout0=tin[0]^xor0;
-			tout1=tin[1]^xor1;
-			l2cn(tout0,tout1,out,l+8);
-			xor0=tin0;
-			xor1=tin1;
-			}
-		l2c(xor0,iv);
-		l2c(xor1,iv);
-		}
-	tin0=tin1=tout0=tout1=xor0=xor1=0;
-	tin[0]=tin[1]=0;
-	}
-
-void RC2_encrypt(unsigned long *d, RC2_KEY *key)
-	{
-	int i,n;
-	register RC2_INT *p0,*p1;
-	register RC2_INT x0,x1,x2,x3,t;
-	unsigned long l;
-
-	l=d[0];
-	x0=(RC2_INT)l&0xffff;
-	x1=(RC2_INT)(l>>16L);
-	l=d[1];
-	x2=(RC2_INT)l&0xffff;
-	x3=(RC2_INT)(l>>16L);
-
-	n=3;
-	i=5;
-
-	p0=p1= &(key->data[0]);
-	for (;;)
-		{
-		t=(x0+(x1& ~x3)+(x2&x3)+ *(p0++))&0xffff;
-		x0=(t<<1)|(t>>15);
-		t=(x1+(x2& ~x0)+(x3&x0)+ *(p0++))&0xffff;
-		x1=(t<<2)|(t>>14);
-		t=(x2+(x3& ~x1)+(x0&x1)+ *(p0++))&0xffff;
-		x2=(t<<3)|(t>>13);
-		t=(x3+(x0& ~x2)+(x1&x2)+ *(p0++))&0xffff;
-		x3=(t<<5)|(t>>11);
-
-		if (--i == 0)
-			{
-			if (--n == 0) break;
-			i=(n == 2)?6:5;
-
-			x0+=p1[x3&0x3f];
-			x1+=p1[x0&0x3f];
-			x2+=p1[x1&0x3f];
-			x3+=p1[x2&0x3f];
-			}
-		}
-
-	d[0]=(unsigned long)(x0&0xffff)|((unsigned long)(x1&0xffff)<<16L);
-	d[1]=(unsigned long)(x2&0xffff)|((unsigned long)(x3&0xffff)<<16L);
-	}
-
-void RC2_decrypt(unsigned long *d, RC2_KEY *key)
-	{
-	int i,n;
-	register RC2_INT *p0,*p1;
-	register RC2_INT x0,x1,x2,x3,t;
-	unsigned long l;
-
-	l=d[0];
-	x0=(RC2_INT)l&0xffff;
-	x1=(RC2_INT)(l>>16L);
-	l=d[1];
-	x2=(RC2_INT)l&0xffff;
-	x3=(RC2_INT)(l>>16L);
-
-	n=3;
-	i=5;
-
-	p0= &(key->data[63]);
-	p1= &(key->data[0]);
-	for (;;)
-		{
-		t=((x3<<11)|(x3>>5))&0xffff;
-		x3=(t-(x0& ~x2)-(x1&x2)- *(p0--))&0xffff;
-		t=((x2<<13)|(x2>>3))&0xffff;
-		x2=(t-(x3& ~x1)-(x0&x1)- *(p0--))&0xffff;
-		t=((x1<<14)|(x1>>2))&0xffff;
-		x1=(t-(x2& ~x0)-(x3&x0)- *(p0--))&0xffff;
-		t=((x0<<15)|(x0>>1))&0xffff;
-		x0=(t-(x1& ~x3)-(x2&x3)- *(p0--))&0xffff;
-
-		if (--i == 0)
-			{
-			if (--n == 0) break;
-			i=(n == 2)?6:5;
-
-			x3=(x3-p1[x2&0x3f])&0xffff;
-			x2=(x2-p1[x1&0x3f])&0xffff;
-			x1=(x1-p1[x0&0x3f])&0xffff;
-			x0=(x0-p1[x3&0x3f])&0xffff;
-			}
-		}
-
-	d[0]=(unsigned long)(x0&0xffff)|((unsigned long)(x1&0xffff)<<16L);
-	d[1]=(unsigned long)(x2&0xffff)|((unsigned long)(x3&0xffff)<<16L);
-	}
-
diff --git a/crypto/openssl/crypto/rc2/rc2_ecb.c b/crypto/openssl/crypto/rc2/rc2_ecb.c
deleted file mode 100644
index fff86c7af897..000000000000
--- a/crypto/openssl/crypto/rc2/rc2_ecb.c
+++ /dev/null
@@ -1,88 +0,0 @@
-/* crypto/rc2/rc2_ecb.c */
-/* Copyright (C) 1995-1998 Eric Young (eay@cryptsoft.com)
- * All rights reserved.
- *
- * This package is an SSL implementation written
- * by Eric Young (eay@cryptsoft.com).
- * The implementation was written so as to conform with Netscapes SSL.
- * 
- * This library is free for commercial and non-commercial use as long as
- * the following conditions are aheared to.  The following conditions
- * apply to all code found in this distribution, be it the RC4, RSA,
- * lhash, DES, etc., code; not just the SSL code.  The SSL documentation
- * included with this distribution is covered by the same copyright terms
- * except that the holder is Tim Hudson (tjh@cryptsoft.com).
- * 
- * Copyright remains Eric Young's, and as such any Copyright notices in
- * the code are not to be removed.
- * If this package is used in a product, Eric Young should be given attribution
- * as the author of the parts of the library used.
- * This can be in the form of a textual message at program startup or
- * in documentation (online or textual) provided with the package.
- * 
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions
- * are met:
- * 1. Redistributions of source code must retain the copyright
- *    notice, this list of conditions and the following disclaimer.
- * 2. Redistributions in binary form must reproduce the above copyright
- *    notice, this list of conditions and the following disclaimer in the
- *    documentation and/or other materials provided with the distribution.
- * 3. All advertising materials mentioning features or use of this software
- *    must display the following acknowledgement:
- *    "This product includes cryptographic software written by
- *     Eric Young (eay@cryptsoft.com)"
- *    The word 'cryptographic' can be left out if the rouines from the library
- *    being used are not cryptographic related :-).
- * 4. If you include any Windows specific code (or a derivative thereof) from 
- *    the apps directory (application code) you must include an acknowledgement:
- *    "This product includes software written by Tim Hudson (tjh@cryptsoft.com)"
- * 
- * THIS SOFTWARE IS PROVIDED BY ERIC YOUNG ``AS IS'' AND
- * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
- * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
- * ARE DISCLAIMED.  IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE
- * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
- * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
- * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
- * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
- * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
- * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
- * SUCH DAMAGE.
- * 
- * The licence and distribution terms for any publically available version or
- * derivative of this code cannot be changed.  i.e. this code cannot simply be
- * copied and put under another distribution licence
- * [including the GNU Public Licence.]
- */
-
-#include <openssl/rc2.h>
-#include "rc2_locl.h"
-#include <openssl/opensslv.h>
-
-const char RC2_version[]="RC2" OPENSSL_VERSION_PTEXT;
-
-/* RC2 as implemented frm a posting from
- * Newsgroups: sci.crypt
- * Sender: pgut01@cs.auckland.ac.nz (Peter Gutmann)
- * Subject: Specification for Ron Rivests Cipher No.2
- * Message-ID: <4fk39f$f70@net.auckland.ac.nz>
- * Date: 11 Feb 1996 06:45:03 GMT
- */
-
-void RC2_ecb_encrypt(const unsigned char *in, unsigned char *out, RC2_KEY *ks,
-		     int encrypt)
-	{
-	unsigned long l,d[2];
-
-	c2l(in,l); d[0]=l;
-	c2l(in,l); d[1]=l;
-	if (encrypt)
-		RC2_encrypt(d,ks);
-	else
-		RC2_decrypt(d,ks);
-	l=d[0]; l2c(l,out);
-	l=d[1]; l2c(l,out);
-	l=d[0]=d[1]=0;
-	}
-
diff --git a/crypto/openssl/crypto/rc2/rc2_locl.h b/crypto/openssl/crypto/rc2/rc2_locl.h
deleted file mode 100644
index 565cd1761973..000000000000
--- a/crypto/openssl/crypto/rc2/rc2_locl.h
+++ /dev/null
@@ -1,156 +0,0 @@
-/* crypto/rc2/rc2_locl.h */
-/* Copyright (C) 1995-1998 Eric Young (eay@cryptsoft.com)
- * All rights reserved.
- *
- * This package is an SSL implementation written
- * by Eric Young (eay@cryptsoft.com).
- * The implementation was written so as to conform with Netscapes SSL.
- * 
- * This library is free for commercial and non-commercial use as long as
- * the following conditions are aheared to.  The following conditions
- * apply to all code found in this distribution, be it the RC4, RSA,
- * lhash, DES, etc., code; not just the SSL code.  The SSL documentation
- * included with this distribution is covered by the same copyright terms
- * except that the holder is Tim Hudson (tjh@cryptsoft.com).
- * 
- * Copyright remains Eric Young's, and as such any Copyright notices in
- * the code are not to be removed.
- * If this package is used in a product, Eric Young should be given attribution
- * as the author of the parts of the library used.
- * This can be in the form of a textual message at program startup or
- * in documentation (online or textual) provided with the package.
- * 
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions
- * are met:
- * 1. Redistributions of source code must retain the copyright
- *    notice, this list of conditions and the following disclaimer.
- * 2. Redistributions in binary form must reproduce the above copyright
- *    notice, this list of conditions and the following disclaimer in the
- *    documentation and/or other materials provided with the distribution.
- * 3. All advertising materials mentioning features or use of this software
- *    must display the following acknowledgement:
- *    "This product includes cryptographic software written by
- *     Eric Young (eay@cryptsoft.com)"
- *    The word 'cryptographic' can be left out if the rouines from the library
- *    being used are not cryptographic related :-).
- * 4. If you include any Windows specific code (or a derivative thereof) from 
- *    the apps directory (application code) you must include an acknowledgement:
- *    "This product includes software written by Tim Hudson (tjh@cryptsoft.com)"
- * 
- * THIS SOFTWARE IS PROVIDED BY ERIC YOUNG ``AS IS'' AND
- * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
- * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
- * ARE DISCLAIMED.  IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE
- * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
- * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
- * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
- * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
- * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
- * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
- * SUCH DAMAGE.
- * 
- * The licence and distribution terms for any publically available version or
- * derivative of this code cannot be changed.  i.e. this code cannot simply be
- * copied and put under another distribution licence
- * [including the GNU Public Licence.]
- */
-
-#undef c2l
-#define c2l(c,l)	(l =((unsigned long)(*((c)++)))    , \
-			 l|=((unsigned long)(*((c)++)))<< 8L, \
-			 l|=((unsigned long)(*((c)++)))<<16L, \
-			 l|=((unsigned long)(*((c)++)))<<24L)
-
-/* NOTE - c is not incremented as per c2l */
-#undef c2ln
-#define c2ln(c,l1,l2,n)	{ \
-			c+=n; \
-			l1=l2=0; \
-			switch (n) { \
-			case 8: l2 =((unsigned long)(*(--(c))))<<24L; \
-			case 7: l2|=((unsigned long)(*(--(c))))<<16L; \
-			case 6: l2|=((unsigned long)(*(--(c))))<< 8L; \
-			case 5: l2|=((unsigned long)(*(--(c))));     \
-			case 4: l1 =((unsigned long)(*(--(c))))<<24L; \
-			case 3: l1|=((unsigned long)(*(--(c))))<<16L; \
-			case 2: l1|=((unsigned long)(*(--(c))))<< 8L; \
-			case 1: l1|=((unsigned long)(*(--(c))));     \
-				} \
-			}
-
-#undef l2c
-#define l2c(l,c)	(*((c)++)=(unsigned char)(((l)     )&0xff), \
-			 *((c)++)=(unsigned char)(((l)>> 8L)&0xff), \
-			 *((c)++)=(unsigned char)(((l)>>16L)&0xff), \
-			 *((c)++)=(unsigned char)(((l)>>24L)&0xff))
-
-/* NOTE - c is not incremented as per l2c */
-#undef l2cn
-#define l2cn(l1,l2,c,n)	{ \
-			c+=n; \
-			switch (n) { \
-			case 8: *(--(c))=(unsigned char)(((l2)>>24L)&0xff); \
-			case 7: *(--(c))=(unsigned char)(((l2)>>16L)&0xff); \
-			case 6: *(--(c))=(unsigned char)(((l2)>> 8L)&0xff); \
-			case 5: *(--(c))=(unsigned char)(((l2)     )&0xff); \
-			case 4: *(--(c))=(unsigned char)(((l1)>>24L)&0xff); \
-			case 3: *(--(c))=(unsigned char)(((l1)>>16L)&0xff); \
-			case 2: *(--(c))=(unsigned char)(((l1)>> 8L)&0xff); \
-			case 1: *(--(c))=(unsigned char)(((l1)     )&0xff); \
-				} \
-			}
-
-/* NOTE - c is not incremented as per n2l */
-#define n2ln(c,l1,l2,n)	{ \
-			c+=n; \
-			l1=l2=0; \
-			switch (n) { \
-			case 8: l2 =((unsigned long)(*(--(c))))    ; \
-			case 7: l2|=((unsigned long)(*(--(c))))<< 8; \
-			case 6: l2|=((unsigned long)(*(--(c))))<<16; \
-			case 5: l2|=((unsigned long)(*(--(c))))<<24; \
-			case 4: l1 =((unsigned long)(*(--(c))))    ; \
-			case 3: l1|=((unsigned long)(*(--(c))))<< 8; \
-			case 2: l1|=((unsigned long)(*(--(c))))<<16; \
-			case 1: l1|=((unsigned long)(*(--(c))))<<24; \
-				} \
-			}
-
-/* NOTE - c is not incremented as per l2n */
-#define l2nn(l1,l2,c,n)	{ \
-			c+=n; \
-			switch (n) { \
-			case 8: *(--(c))=(unsigned char)(((l2)    )&0xff); \
-			case 7: *(--(c))=(unsigned char)(((l2)>> 8)&0xff); \
-			case 6: *(--(c))=(unsigned char)(((l2)>>16)&0xff); \
-			case 5: *(--(c))=(unsigned char)(((l2)>>24)&0xff); \
-			case 4: *(--(c))=(unsigned char)(((l1)    )&0xff); \
-			case 3: *(--(c))=(unsigned char)(((l1)>> 8)&0xff); \
-			case 2: *(--(c))=(unsigned char)(((l1)>>16)&0xff); \
-			case 1: *(--(c))=(unsigned char)(((l1)>>24)&0xff); \
-				} \
-			}
-
-#undef n2l
-#define n2l(c,l)        (l =((unsigned long)(*((c)++)))<<24L, \
-                         l|=((unsigned long)(*((c)++)))<<16L, \
-                         l|=((unsigned long)(*((c)++)))<< 8L, \
-                         l|=((unsigned long)(*((c)++))))
-
-#undef l2n
-#define l2n(l,c)        (*((c)++)=(unsigned char)(((l)>>24L)&0xff), \
-                         *((c)++)=(unsigned char)(((l)>>16L)&0xff), \
-                         *((c)++)=(unsigned char)(((l)>> 8L)&0xff), \
-                         *((c)++)=(unsigned char)(((l)     )&0xff))
-
-#define C_RC2(n) \
-	t=(x0+(x1& ~x3)+(x2&x3)+ *(p0++))&0xffff; \
-	x0=(t<<1)|(t>>15); \
-	t=(x1+(x2& ~x0)+(x3&x0)+ *(p0++))&0xffff; \
-	x1=(t<<2)|(t>>14); \
-	t=(x2+(x3& ~x1)+(x0&x1)+ *(p0++))&0xffff; \
-	x2=(t<<3)|(t>>13); \
-	t=(x3+(x0& ~x2)+(x1&x2)+ *(p0++))&0xffff; \
-	x3=(t<<5)|(t>>11);
-
diff --git a/crypto/openssl/crypto/rc2/rc2_skey.c b/crypto/openssl/crypto/rc2/rc2_skey.c
deleted file mode 100644
index 49536420566b..000000000000
--- a/crypto/openssl/crypto/rc2/rc2_skey.c
+++ /dev/null
@@ -1,145 +0,0 @@
-/* crypto/rc2/rc2_skey.c */
-/* Copyright (C) 1995-1998 Eric Young (eay@cryptsoft.com)
- * All rights reserved.
- *
- * This package is an SSL implementation written
- * by Eric Young (eay@cryptsoft.com).
- * The implementation was written so as to conform with Netscapes SSL.
- * 
- * This library is free for commercial and non-commercial use as long as
- * the following conditions are aheared to.  The following conditions
- * apply to all code found in this distribution, be it the RC4, RSA,
- * lhash, DES, etc., code; not just the SSL code.  The SSL documentation
- * included with this distribution is covered by the same copyright terms
- * except that the holder is Tim Hudson (tjh@cryptsoft.com).
- * 
- * Copyright remains Eric Young's, and as such any Copyright notices in
- * the code are not to be removed.
- * If this package is used in a product, Eric Young should be given attribution
- * as the author of the parts of the library used.
- * This can be in the form of a textual message at program startup or
- * in documentation (online or textual) provided with the package.
- * 
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions
- * are met:
- * 1. Redistributions of source code must retain the copyright
- *    notice, this list of conditions and the following disclaimer.
- * 2. Redistributions in binary form must reproduce the above copyright
- *    notice, this list of conditions and the following disclaimer in the
- *    documentation and/or other materials provided with the distribution.
- * 3. All advertising materials mentioning features or use of this software
- *    must display the following acknowledgement:
- *    "This product includes cryptographic software written by
- *     Eric Young (eay@cryptsoft.com)"
- *    The word 'cryptographic' can be left out if the rouines from the library
- *    being used are not cryptographic related :-).
- * 4. If you include any Windows specific code (or a derivative thereof) from 
- *    the apps directory (application code) you must include an acknowledgement:
- *    "This product includes software written by Tim Hudson (tjh@cryptsoft.com)"
- * 
- * THIS SOFTWARE IS PROVIDED BY ERIC YOUNG ``AS IS'' AND
- * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
- * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
- * ARE DISCLAIMED.  IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE
- * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
- * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
- * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
- * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
- * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
- * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
- * SUCH DAMAGE.
- * 
- * The licence and distribution terms for any publically available version or
- * derivative of this code cannot be changed.  i.e. this code cannot simply be
- * copied and put under another distribution licence
- * [including the GNU Public Licence.]
- */
-
-#include <openssl/rc2.h>
-#include "rc2_locl.h"
-
-static unsigned char key_table[256]={
-	0xd9,0x78,0xf9,0xc4,0x19,0xdd,0xb5,0xed,0x28,0xe9,0xfd,0x79,
-	0x4a,0xa0,0xd8,0x9d,0xc6,0x7e,0x37,0x83,0x2b,0x76,0x53,0x8e,
-	0x62,0x4c,0x64,0x88,0x44,0x8b,0xfb,0xa2,0x17,0x9a,0x59,0xf5,
-	0x87,0xb3,0x4f,0x13,0x61,0x45,0x6d,0x8d,0x09,0x81,0x7d,0x32,
-	0xbd,0x8f,0x40,0xeb,0x86,0xb7,0x7b,0x0b,0xf0,0x95,0x21,0x22,
-	0x5c,0x6b,0x4e,0x82,0x54,0xd6,0x65,0x93,0xce,0x60,0xb2,0x1c,
-	0x73,0x56,0xc0,0x14,0xa7,0x8c,0xf1,0xdc,0x12,0x75,0xca,0x1f,
-	0x3b,0xbe,0xe4,0xd1,0x42,0x3d,0xd4,0x30,0xa3,0x3c,0xb6,0x26,
-	0x6f,0xbf,0x0e,0xda,0x46,0x69,0x07,0x57,0x27,0xf2,0x1d,0x9b,
-	0xbc,0x94,0x43,0x03,0xf8,0x11,0xc7,0xf6,0x90,0xef,0x3e,0xe7,
-	0x06,0xc3,0xd5,0x2f,0xc8,0x66,0x1e,0xd7,0x08,0xe8,0xea,0xde,
-	0x80,0x52,0xee,0xf7,0x84,0xaa,0x72,0xac,0x35,0x4d,0x6a,0x2a,
-	0x96,0x1a,0xd2,0x71,0x5a,0x15,0x49,0x74,0x4b,0x9f,0xd0,0x5e,
-	0x04,0x18,0xa4,0xec,0xc2,0xe0,0x41,0x6e,0x0f,0x51,0xcb,0xcc,
-	0x24,0x91,0xaf,0x50,0xa1,0xf4,0x70,0x39,0x99,0x7c,0x3a,0x85,
-	0x23,0xb8,0xb4,0x7a,0xfc,0x02,0x36,0x5b,0x25,0x55,0x97,0x31,
-	0x2d,0x5d,0xfa,0x98,0xe3,0x8a,0x92,0xae,0x05,0xdf,0x29,0x10,
-	0x67,0x6c,0xba,0xc9,0xd3,0x00,0xe6,0xcf,0xe1,0x9e,0xa8,0x2c,
-	0x63,0x16,0x01,0x3f,0x58,0xe2,0x89,0xa9,0x0d,0x38,0x34,0x1b,
-	0xab,0x33,0xff,0xb0,0xbb,0x48,0x0c,0x5f,0xb9,0xb1,0xcd,0x2e,
-	0xc5,0xf3,0xdb,0x47,0xe5,0xa5,0x9c,0x77,0x0a,0xa6,0x20,0x68,
-	0xfe,0x7f,0xc1,0xad,
-	};
-
-#if defined(_MSC_VER) && defined(_ARM_)
-#pragma optimize("g",off)
-#endif
-
-/* It has come to my attention that there are 2 versions of the RC2
- * key schedule.  One which is normal, and anther which has a hook to
- * use a reduced key length.
- * BSAFE uses the 'retarded' version.  What I previously shipped is
- * the same as specifying 1024 for the 'bits' parameter.  Bsafe uses
- * a version where the bits parameter is the same as len*8 */
-void RC2_set_key(RC2_KEY *key, int len, const unsigned char *data, int bits)
-	{
-	int i,j;
-	unsigned char *k;
-	RC2_INT *ki;
-	unsigned int c,d;
-
-	k= (unsigned char *)&(key->data[0]);
-	*k=0; /* for if there is a zero length key */
-
-	if (len > 128) len=128;
-	if (bits <= 0) bits=1024;
-	if (bits > 1024) bits=1024;
-
-	for (i=0; i<len; i++)
-		k[i]=data[i];
-
-	/* expand table */
-	d=k[len-1];
-	j=0;
-	for (i=len; i < 128; i++,j++)
-		{
-		d=key_table[(k[j]+d)&0xff];
-		k[i]=d;
-		}
-
-	/* hmm.... key reduction to 'bits' bits */
-
-	j=(bits+7)>>3;
-	i=128-j;
-	c= (0xff>>(-bits & 0x07));
-
-	d=key_table[k[i]&c];
-	k[i]=d;
-	while (i--)
-		{
-		d=key_table[k[i+j]^d];
-		k[i]=d;
-		}
-
-	/* copy from bytes into RC2_INT's */
-	ki= &(key->data[63]);
-	for (i=127; i>=0; i-=2)
-		*(ki--)=((k[i]<<8)|k[i-1])&0xffff;
-	}
-
-#if defined(_MSC_VER)
-#pragma optimize("",on)
-#endif
diff --git a/crypto/openssl/crypto/rc2/rc2cfb64.c b/crypto/openssl/crypto/rc2/rc2cfb64.c
deleted file mode 100644
index b3a0158a6e65..000000000000
--- a/crypto/openssl/crypto/rc2/rc2cfb64.c
+++ /dev/null
@@ -1,122 +0,0 @@
-/* crypto/rc2/rc2cfb64.c */
-/* Copyright (C) 1995-1998 Eric Young (eay@cryptsoft.com)
- * All rights reserved.
- *
- * This package is an SSL implementation written
- * by Eric Young (eay@cryptsoft.com).
- * The implementation was written so as to conform with Netscapes SSL.
- * 
- * This library is free for commercial and non-commercial use as long as
- * the following conditions are aheared to.  The following conditions
- * apply to all code found in this distribution, be it the RC4, RSA,
- * lhash, DES, etc., code; not just the SSL code.  The SSL documentation
- * included with this distribution is covered by the same copyright terms
- * except that the holder is Tim Hudson (tjh@cryptsoft.com).
- * 
- * Copyright remains Eric Young's, and as such any Copyright notices in
- * the code are not to be removed.
- * If this package is used in a product, Eric Young should be given attribution
- * as the author of the parts of the library used.
- * This can be in the form of a textual message at program startup or
- * in documentation (online or textual) provided with the package.
- * 
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions
- * are met:
- * 1. Redistributions of source code must retain the copyright
- *    notice, this list of conditions and the following disclaimer.
- * 2. Redistributions in binary form must reproduce the above copyright
- *    notice, this list of conditions and the following disclaimer in the
- *    documentation and/or other materials provided with the distribution.
- * 3. All advertising materials mentioning features or use of this software
- *    must display the following acknowledgement:
- *    "This product includes cryptographic software written by
- *     Eric Young (eay@cryptsoft.com)"
- *    The word 'cryptographic' can be left out if the rouines from the library
- *    being used are not cryptographic related :-).
- * 4. If you include any Windows specific code (or a derivative thereof) from 
- *    the apps directory (application code) you must include an acknowledgement:
- *    "This product includes software written by Tim Hudson (tjh@cryptsoft.com)"
- * 
- * THIS SOFTWARE IS PROVIDED BY ERIC YOUNG ``AS IS'' AND
- * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
- * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
- * ARE DISCLAIMED.  IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE
- * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
- * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
- * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
- * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
- * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
- * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
- * SUCH DAMAGE.
- * 
- * The licence and distribution terms for any publically available version or
- * derivative of this code cannot be changed.  i.e. this code cannot simply be
- * copied and put under another distribution licence
- * [including the GNU Public Licence.]
- */
-
-#include <openssl/rc2.h>
-#include "rc2_locl.h"
-
-/* The input and output encrypted as though 64bit cfb mode is being
- * used.  The extra state information to record how much of the
- * 64bit block we have used is contained in *num;
- */
-
-void RC2_cfb64_encrypt(const unsigned char *in, unsigned char *out,
-		       long length, RC2_KEY *schedule, unsigned char *ivec,
-		       int *num, int encrypt)
-	{
-	register unsigned long v0,v1,t;
-	register int n= *num;
-	register long l=length;
-	unsigned long ti[2];
-	unsigned char *iv,c,cc;
-
-	iv=(unsigned char *)ivec;
-	if (encrypt)
-		{
-		while (l--)
-			{
-			if (n == 0)
-				{
-				c2l(iv,v0); ti[0]=v0;
-				c2l(iv,v1); ti[1]=v1;
-				RC2_encrypt((unsigned long *)ti,schedule);
-				iv=(unsigned char *)ivec;
-				t=ti[0]; l2c(t,iv);
-				t=ti[1]; l2c(t,iv);
-				iv=(unsigned char *)ivec;
-				}
-			c= *(in++)^iv[n];
-			*(out++)=c;
-			iv[n]=c;
-			n=(n+1)&0x07;
-			}
-		}
-	else
-		{
-		while (l--)
-			{
-			if (n == 0)
-				{
-				c2l(iv,v0); ti[0]=v0;
-				c2l(iv,v1); ti[1]=v1;
-				RC2_encrypt((unsigned long *)ti,schedule);
-				iv=(unsigned char *)ivec;
-				t=ti[0]; l2c(t,iv);
-				t=ti[1]; l2c(t,iv);
-				iv=(unsigned char *)ivec;
-				}
-			cc= *(in++);
-			c=iv[n];
-			iv[n]=cc;
-			*(out++)=c^cc;
-			n=(n+1)&0x07;
-			}
-		}
-	v0=v1=ti[0]=ti[1]=t=c=cc=0;
-	*num=n;
-	}
-
diff --git a/crypto/openssl/crypto/rc2/rc2ofb64.c b/crypto/openssl/crypto/rc2/rc2ofb64.c
deleted file mode 100644
index 9e297867ed56..000000000000
--- a/crypto/openssl/crypto/rc2/rc2ofb64.c
+++ /dev/null
@@ -1,111 +0,0 @@
-/* crypto/rc2/rc2ofb64.c */
-/* Copyright (C) 1995-1998 Eric Young (eay@cryptsoft.com)
- * All rights reserved.
- *
- * This package is an SSL implementation written
- * by Eric Young (eay@cryptsoft.com).
- * The implementation was written so as to conform with Netscapes SSL.
- * 
- * This library is free for commercial and non-commercial use as long as
- * the following conditions are aheared to.  The following conditions
- * apply to all code found in this distribution, be it the RC4, RSA,
- * lhash, DES, etc., code; not just the SSL code.  The SSL documentation
- * included with this distribution is covered by the same copyright terms
- * except that the holder is Tim Hudson (tjh@cryptsoft.com).
- * 
- * Copyright remains Eric Young's, and as such any Copyright notices in
- * the code are not to be removed.
- * If this package is used in a product, Eric Young should be given attribution
- * as the author of the parts of the library used.
- * This can be in the form of a textual message at program startup or
- * in documentation (online or textual) provided with the package.
- * 
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions
- * are met:
- * 1. Redistributions of source code must retain the copyright
- *    notice, this list of conditions and the following disclaimer.
- * 2. Redistributions in binary form must reproduce the above copyright
- *    notice, this list of conditions and the following disclaimer in the
- *    documentation and/or other materials provided with the distribution.
- * 3. All advertising materials mentioning features or use of this software
- *    must display the following acknowledgement:
- *    "This product includes cryptographic software written by
- *     Eric Young (eay@cryptsoft.com)"
- *    The word 'cryptographic' can be left out if the rouines from the library
- *    being used are not cryptographic related :-).
- * 4. If you include any Windows specific code (or a derivative thereof) from 
- *    the apps directory (application code) you must include an acknowledgement:
- *    "This product includes software written by Tim Hudson (tjh@cryptsoft.com)"
- * 
- * THIS SOFTWARE IS PROVIDED BY ERIC YOUNG ``AS IS'' AND
- * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
- * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
- * ARE DISCLAIMED.  IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE
- * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
- * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
- * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
- * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
- * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
- * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
- * SUCH DAMAGE.
- * 
- * The licence and distribution terms for any publically available version or
- * derivative of this code cannot be changed.  i.e. this code cannot simply be
- * copied and put under another distribution licence
- * [including the GNU Public Licence.]
- */
-
-#include <openssl/rc2.h>
-#include "rc2_locl.h"
-
-/* The input and output encrypted as though 64bit ofb mode is being
- * used.  The extra state information to record how much of the
- * 64bit block we have used is contained in *num;
- */
-void RC2_ofb64_encrypt(const unsigned char *in, unsigned char *out,
-		       long length, RC2_KEY *schedule, unsigned char *ivec,
-		       int *num)
-	{
-	register unsigned long v0,v1,t;
-	register int n= *num;
-	register long l=length;
-	unsigned char d[8];
-	register char *dp;
-	unsigned long ti[2];
-	unsigned char *iv;
-	int save=0;
-
-	iv=(unsigned char *)ivec;
-	c2l(iv,v0);
-	c2l(iv,v1);
-	ti[0]=v0;
-	ti[1]=v1;
-	dp=(char *)d;
-	l2c(v0,dp);
-	l2c(v1,dp);
-	while (l--)
-		{
-		if (n == 0)
-			{
-			RC2_encrypt((unsigned long *)ti,schedule);
-			dp=(char *)d;
-			t=ti[0]; l2c(t,dp);
-			t=ti[1]; l2c(t,dp);
-			save++;
-			}
-		*(out++)= *(in++)^d[n];
-		n=(n+1)&0x07;
-		}
-	if (save)
-		{
-		v0=ti[0];
-		v1=ti[1];
-		iv=(unsigned char *)ivec;
-		l2c(v0,iv);
-		l2c(v1,iv);
-		}
-	t=v0=v1=ti[0]=ti[1]=0;
-	*num=n;
-	}
-
diff --git a/crypto/openssl/crypto/rc2/rc2speed.c b/crypto/openssl/crypto/rc2/rc2speed.c
deleted file mode 100644
index 85cf6f65bf15..000000000000
--- a/crypto/openssl/crypto/rc2/rc2speed.c
+++ /dev/null
@@ -1,277 +0,0 @@
-/* crypto/rc2/rc2speed.c */
-/* Copyright (C) 1995-1998 Eric Young (eay@cryptsoft.com)
- * All rights reserved.
- *
- * This package is an SSL implementation written
- * by Eric Young (eay@cryptsoft.com).
- * The implementation was written so as to conform with Netscapes SSL.
- * 
- * This library is free for commercial and non-commercial use as long as
- * the following conditions are aheared to.  The following conditions
- * apply to all code found in this distribution, be it the RC4, RSA,
- * lhash, DES, etc., code; not just the SSL code.  The SSL documentation
- * included with this distribution is covered by the same copyright terms
- * except that the holder is Tim Hudson (tjh@cryptsoft.com).
- * 
- * Copyright remains Eric Young's, and as such any Copyright notices in
- * the code are not to be removed.
- * If this package is used in a product, Eric Young should be given attribution
- * as the author of the parts of the library used.
- * This can be in the form of a textual message at program startup or
- * in documentation (online or textual) provided with the package.
- * 
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions
- * are met:
- * 1. Redistributions of source code must retain the copyright
- *    notice, this list of conditions and the following disclaimer.
- * 2. Redistributions in binary form must reproduce the above copyright
- *    notice, this list of conditions and the following disclaimer in the
- *    documentation and/or other materials provided with the distribution.
- * 3. All advertising materials mentioning features or use of this software
- *    must display the following acknowledgement:
- *    "This product includes cryptographic software written by
- *     Eric Young (eay@cryptsoft.com)"
- *    The word 'cryptographic' can be left out if the rouines from the library
- *    being used are not cryptographic related :-).
- * 4. If you include any Windows specific code (or a derivative thereof) from 
- *    the apps directory (application code) you must include an acknowledgement:
- *    "This product includes software written by Tim Hudson (tjh@cryptsoft.com)"
- * 
- * THIS SOFTWARE IS PROVIDED BY ERIC YOUNG ``AS IS'' AND
- * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
- * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
- * ARE DISCLAIMED.  IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE
- * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
- * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
- * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
- * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
- * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
- * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
- * SUCH DAMAGE.
- * 
- * The licence and distribution terms for any publically available version or
- * derivative of this code cannot be changed.  i.e. this code cannot simply be
- * copied and put under another distribution licence
- * [including the GNU Public Licence.]
- */
-
-/* 11-Sep-92 Andrew Daviel   Support for Silicon Graphics IRIX added */
-/* 06-Apr-92 Luke Brennan    Support for VMS and add extra signal calls */
-
-#if !defined(OPENSSL_SYS_MSDOS) && (!defined(OPENSSL_SYS_VMS) || defined(__DECC)) && !defined(OPENSSL_SYS_MACOSX)
-#define TIMES
-#endif
-
-#include <stdio.h>
-
-#include <openssl/e_os2.h>
-#include OPENSSL_UNISTD_IO
-OPENSSL_DECLARE_EXIT
-
-#ifndef OPENSSL_SYS_NETWARE
-#include <signal.h>
-#endif
-
-#ifndef _IRIX
-#include <time.h>
-#endif
-#ifdef TIMES
-#include <sys/types.h>
-#include <sys/times.h>
-#endif
-
-/* Depending on the VMS version, the tms structure is perhaps defined.
-   The __TMS macro will show if it was.  If it wasn't defined, we should
-   undefine TIMES, since that tells the rest of the program how things
-   should be handled.				-- Richard Levitte */
-#if defined(OPENSSL_SYS_VMS_DECC) && !defined(__TMS)
-#undef TIMES
-#endif
-
-#ifndef TIMES
-#include <sys/timeb.h>
-#endif
-
-#if defined(sun) || defined(__ultrix)
-#define _POSIX_SOURCE
-#include <limits.h>
-#include <sys/param.h>
-#endif
-
-#include <openssl/rc2.h>
-
-/* The following if from times(3) man page.  It may need to be changed */
-#ifndef HZ
-#ifndef CLK_TCK
-#define HZ	100.0
-#else	/* CLK_TCK */
-#define HZ ((double)CLK_TCK)
-#endif	/* CLK_TCK */
-#endif	/* HZ */
-
-#define BUFSIZE	((long)1024)
-long run=0;
-
-double Time_F(int s);
-#ifdef SIGALRM
-#if defined(__STDC__) || defined(sgi) || defined(_AIX)
-#define SIGRETTYPE void
-#else
-#define SIGRETTYPE int
-#endif
-
-SIGRETTYPE sig_done(int sig);
-SIGRETTYPE sig_done(int sig)
-	{
-	signal(SIGALRM,sig_done);
-	run=0;
-#ifdef LINT
-	sig=sig;
-#endif
-	}
-#endif
-
-#define START	0
-#define STOP	1
-
-double Time_F(int s)
-	{
-	double ret;
-#ifdef TIMES
-	static struct tms tstart,tend;
-
-	if (s == START)
-		{
-		times(&tstart);
-		return(0);
-		}
-	else
-		{
-		times(&tend);
-		ret=((double)(tend.tms_utime-tstart.tms_utime))/HZ;
-		return((ret == 0.0)?1e-6:ret);
-		}
-#else /* !times() */
-	static struct timeb tstart,tend;
-	long i;
-
-	if (s == START)
-		{
-		ftime(&tstart);
-		return(0);
-		}
-	else
-		{
-		ftime(&tend);
-		i=(long)tend.millitm-(long)tstart.millitm;
-		ret=((double)(tend.time-tstart.time))+((double)i)/1e3;
-		return((ret == 0.0)?1e-6:ret);
-		}
-#endif
-	}
-
-int main(int argc, char **argv)
-	{
-	long count;
-	static unsigned char buf[BUFSIZE];
-	static unsigned char key[] ={
-			0x12,0x34,0x56,0x78,0x9a,0xbc,0xde,0xf0,
-			0xfe,0xdc,0xba,0x98,0x76,0x54,0x32,0x10,
-			};
-	RC2_KEY sch;
-	double a,b,c,d;
-#ifndef SIGALRM
-	long ca,cb,cc;
-#endif
-
-#ifndef TIMES
-	printf("To get the most accurate results, try to run this\n");
-	printf("program when this computer is idle.\n");
-#endif
-
-#ifndef SIGALRM
-	printf("First we calculate the approximate speed ...\n");
-	RC2_set_key(&sch,16,key,128);
-	count=10;
-	do	{
-		long i;
-		unsigned long data[2];
-
-		count*=2;
-		Time_F(START);
-		for (i=count; i; i--)
-			RC2_encrypt(data,&sch);
-		d=Time_F(STOP);
-		} while (d < 3.0);
-	ca=count/512;
-	cb=count;
-	cc=count*8/BUFSIZE+1;
-	printf("Doing RC2_set_key %ld times\n",ca);
-#define COND(d)	(count != (d))
-#define COUNT(d) (d)
-#else
-#define COND(c)	(run)
-#define COUNT(d) (count)
-	signal(SIGALRM,sig_done);
-	printf("Doing RC2_set_key for 10 seconds\n");
-	alarm(10);
-#endif
-
-	Time_F(START);
-	for (count=0,run=1; COND(ca); count+=4)
-		{
-		RC2_set_key(&sch,16,key,128);
-		RC2_set_key(&sch,16,key,128);
-		RC2_set_key(&sch,16,key,128);
-		RC2_set_key(&sch,16,key,128);
-		}
-	d=Time_F(STOP);
-	printf("%ld RC2_set_key's in %.2f seconds\n",count,d);
-	a=((double)COUNT(ca))/d;
-
-#ifdef SIGALRM
-	printf("Doing RC2_encrypt's for 10 seconds\n");
-	alarm(10);
-#else
-	printf("Doing RC2_encrypt %ld times\n",cb);
-#endif
-	Time_F(START);
-	for (count=0,run=1; COND(cb); count+=4)
-		{
-		unsigned long data[2];
-
-		RC2_encrypt(data,&sch);
-		RC2_encrypt(data,&sch);
-		RC2_encrypt(data,&sch);
-		RC2_encrypt(data,&sch);
-		}
-	d=Time_F(STOP);
-	printf("%ld RC2_encrypt's in %.2f second\n",count,d);
-	b=((double)COUNT(cb)*8)/d;
-
-#ifdef SIGALRM
-	printf("Doing RC2_cbc_encrypt on %ld byte blocks for 10 seconds\n",
-		BUFSIZE);
-	alarm(10);
-#else
-	printf("Doing RC2_cbc_encrypt %ld times on %ld byte blocks\n",cc,
-		BUFSIZE);
-#endif
-	Time_F(START);
-	for (count=0,run=1; COND(cc); count++)
-		RC2_cbc_encrypt(buf,buf,BUFSIZE,&sch,
-			&(key[0]),RC2_ENCRYPT);
-	d=Time_F(STOP);
-	printf("%ld RC2_cbc_encrypt's of %ld byte blocks in %.2f second\n",
-		count,BUFSIZE,d);
-	c=((double)COUNT(cc)*BUFSIZE)/d;
-
-	printf("RC2 set_key       per sec = %12.2f (%9.3fuS)\n",a,1.0e6/a);
-	printf("RC2 raw ecb bytes per sec = %12.2f (%9.3fuS)\n",b,8.0e6/b);
-	printf("RC2 cbc     bytes per sec = %12.2f (%9.3fuS)\n",c,8.0e6/c);
-	exit(0);
-#if defined(LINT) || defined(OPENSSL_SYS_MSDOS)
-	return(0);
-#endif
-	}
diff --git a/crypto/openssl/crypto/rc2/rc2test.c b/crypto/openssl/crypto/rc2/rc2test.c
deleted file mode 100644
index 0e117436bb33..000000000000
--- a/crypto/openssl/crypto/rc2/rc2test.c
+++ /dev/null
@@ -1,274 +0,0 @@
-/* crypto/rc2/rc2test.c */
-/* Copyright (C) 1995-1998 Eric Young (eay@cryptsoft.com)
- * All rights reserved.
- *
- * This package is an SSL implementation written
- * by Eric Young (eay@cryptsoft.com).
- * The implementation was written so as to conform with Netscapes SSL.
- * 
- * This library is free for commercial and non-commercial use as long as
- * the following conditions are aheared to.  The following conditions
- * apply to all code found in this distribution, be it the RC4, RSA,
- * lhash, DES, etc., code; not just the SSL code.  The SSL documentation
- * included with this distribution is covered by the same copyright terms
- * except that the holder is Tim Hudson (tjh@cryptsoft.com).
- * 
- * Copyright remains Eric Young's, and as such any Copyright notices in
- * the code are not to be removed.
- * If this package is used in a product, Eric Young should be given attribution
- * as the author of the parts of the library used.
- * This can be in the form of a textual message at program startup or
- * in documentation (online or textual) provided with the package.
- * 
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions
- * are met:
- * 1. Redistributions of source code must retain the copyright
- *    notice, this list of conditions and the following disclaimer.
- * 2. Redistributions in binary form must reproduce the above copyright
- *    notice, this list of conditions and the following disclaimer in the
- *    documentation and/or other materials provided with the distribution.
- * 3. All advertising materials mentioning features or use of this software
- *    must display the following acknowledgement:
- *    "This product includes cryptographic software written by
- *     Eric Young (eay@cryptsoft.com)"
- *    The word 'cryptographic' can be left out if the rouines from the library
- *    being used are not cryptographic related :-).
- * 4. If you include any Windows specific code (or a derivative thereof) from 
- *    the apps directory (application code) you must include an acknowledgement:
- *    "This product includes software written by Tim Hudson (tjh@cryptsoft.com)"
- * 
- * THIS SOFTWARE IS PROVIDED BY ERIC YOUNG ``AS IS'' AND
- * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
- * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
- * ARE DISCLAIMED.  IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE
- * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
- * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
- * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
- * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
- * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
- * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
- * SUCH DAMAGE.
- * 
- * The licence and distribution terms for any publically available version or
- * derivative of this code cannot be changed.  i.e. this code cannot simply be
- * copied and put under another distribution licence
- * [including the GNU Public Licence.]
- */
-
-/* This has been a quickly hacked 'ideatest.c'.  When I add tests for other
- * RC2 modes, more of the code will be uncommented. */
-
-#include <stdio.h>
-#include <string.h>
-#include <stdlib.h>
-
-#include "../e_os.h"
-
-#ifdef OPENSSL_NO_RC2
-int main(int argc, char *argv[])
-{
-    printf("No RC2 support\n");
-    return(0);
-}
-#else
-#include <openssl/rc2.h>
-
-static unsigned char RC2key[4][16]={
-	{0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
-	 0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00},
-	{0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
-	 0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x01},
-	{0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
-	 0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00},
-	{0x00,0x01,0x02,0x03,0x04,0x05,0x06,0x07,
-	 0x08,0x09,0x0A,0x0B,0x0C,0x0D,0x0E,0x0F},
-	};
-
-static unsigned char RC2plain[4][8]={
-	{0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00},
-	{0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00},
-	{0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF},
-	{0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00},
-	};
-
-static unsigned char RC2cipher[4][8]={
-	{0x1C,0x19,0x8A,0x83,0x8D,0xF0,0x28,0xB7},
-	{0x21,0x82,0x9C,0x78,0xA9,0xF9,0xC0,0x74},
-	{0x13,0xDB,0x35,0x17,0xD3,0x21,0x86,0x9E},
-	{0x50,0xDC,0x01,0x62,0xBD,0x75,0x7F,0x31},
-	};
-/************/
-#ifdef undef
-unsigned char k[16]={
-	0x00,0x01,0x00,0x02,0x00,0x03,0x00,0x04,
-	0x00,0x05,0x00,0x06,0x00,0x07,0x00,0x08};
-
-unsigned char in[8]={0x00,0x00,0x00,0x01,0x00,0x02,0x00,0x03};
-unsigned char  c[8]={0x11,0xFB,0xED,0x2B,0x01,0x98,0x6D,0xE5};
-unsigned char out[80];
-
-char *text="Hello to all people out there";
-
-static unsigned char cfb_key[16]={
-	0xe1,0xf0,0xc3,0xd2,0xa5,0xb4,0x87,0x96,
-	0x69,0x78,0x4b,0x5a,0x2d,0x3c,0x0f,0x1e,
-	};
-static unsigned char cfb_iv[80]={0x34,0x12,0x78,0x56,0xab,0x90,0xef,0xcd};
-static unsigned char cfb_buf1[40],cfb_buf2[40],cfb_tmp[8];
-#define CFB_TEST_SIZE 24
-static unsigned char plain[CFB_TEST_SIZE]=
-        {
-        0x4e,0x6f,0x77,0x20,0x69,0x73,
-        0x20,0x74,0x68,0x65,0x20,0x74,
-        0x69,0x6d,0x65,0x20,0x66,0x6f,
-        0x72,0x20,0x61,0x6c,0x6c,0x20
-        };
-static unsigned char cfb_cipher64[CFB_TEST_SIZE]={
-	0x59,0xD8,0xE2,0x65,0x00,0x58,0x6C,0x3F,
-	0x2C,0x17,0x25,0xD0,0x1A,0x38,0xB7,0x2A,
-	0x39,0x61,0x37,0xDC,0x79,0xFB,0x9F,0x45
-
-/*	0xF9,0x78,0x32,0xB5,0x42,0x1A,0x6B,0x38,
-	0x9A,0x44,0xD6,0x04,0x19,0x43,0xC4,0xD9,
-	0x3D,0x1E,0xAE,0x47,0xFC,0xCF,0x29,0x0B,*/
-	}; 
-
-
-/*static int cfb64_test(unsigned char *cfb_cipher);*/
-static char *pt(unsigned char *p);
-#endif
-
-int main(int argc, char *argv[])
-	{
-	int i,n,err=0;
-	RC2_KEY key; 
-	unsigned char buf[8],buf2[8];
-
-	for (n=0; n<4; n++)
-		{
-		RC2_set_key(&key,16,&(RC2key[n][0]),0 /* or 1024 */);
-
-		RC2_ecb_encrypt(&(RC2plain[n][0]),buf,&key,RC2_ENCRYPT);
-		if (memcmp(&(RC2cipher[n][0]),buf,8) != 0)
-			{
-			printf("ecb rc2 error encrypting\n");
-			printf("got     :");
-			for (i=0; i<8; i++)
-				printf("%02X ",buf[i]);
-			printf("\n");
-			printf("expected:");
-			for (i=0; i<8; i++)
-				printf("%02X ",RC2cipher[n][i]);
-			err=20;
-			printf("\n");
-			}
-
-		RC2_ecb_encrypt(buf,buf2,&key,RC2_DECRYPT);
-		if (memcmp(&(RC2plain[n][0]),buf2,8) != 0)
-			{
-			printf("ecb RC2 error decrypting\n");
-			printf("got     :");
-			for (i=0; i<8; i++)
-				printf("%02X ",buf[i]);
-			printf("\n");
-			printf("expected:");
-			for (i=0; i<8; i++)
-				printf("%02X ",RC2plain[n][i]);
-			printf("\n");
-			err=3;
-			}
-		}
-
-	if (err == 0) printf("ecb RC2 ok\n");
-#ifdef undef
-	memcpy(iv,k,8);
-	idea_cbc_encrypt((unsigned char *)text,out,strlen(text)+1,&key,iv,1);
-	memcpy(iv,k,8);
-	idea_cbc_encrypt(out,out,8,&dkey,iv,0);
-	idea_cbc_encrypt(&(out[8]),&(out[8]),strlen(text)+1-8,&dkey,iv,0);
-	if (memcmp(text,out,strlen(text)+1) != 0)
-		{
-		printf("cbc idea bad\n");
-		err=4;
-		}
-	else
-		printf("cbc idea ok\n");
-
-	printf("cfb64 idea ");
-	if (cfb64_test(cfb_cipher64))
-		{
-		printf("bad\n");
-		err=5;
-		}
-	else
-		printf("ok\n");
-#endif
-
-#ifdef OPENSSL_SYS_NETWARE
-    if (err) printf("ERROR: %d\n", err);
-#endif
-	EXIT(err);
-	return(err);
-	}
-
-#ifdef undef
-static int cfb64_test(unsigned char *cfb_cipher)
-        {
-        IDEA_KEY_SCHEDULE eks,dks;
-        int err=0,i,n;
-
-        idea_set_encrypt_key(cfb_key,&eks);
-        idea_set_decrypt_key(&eks,&dks);
-        memcpy(cfb_tmp,cfb_iv,8);
-        n=0;
-        idea_cfb64_encrypt(plain,cfb_buf1,(long)12,&eks,
-                cfb_tmp,&n,IDEA_ENCRYPT);
-        idea_cfb64_encrypt(&(plain[12]),&(cfb_buf1[12]),
-                (long)CFB_TEST_SIZE-12,&eks,
-                cfb_tmp,&n,IDEA_ENCRYPT);
-        if (memcmp(cfb_cipher,cfb_buf1,CFB_TEST_SIZE) != 0)
-                {
-                err=1;
-                printf("idea_cfb64_encrypt encrypt error\n");
-                for (i=0; i<CFB_TEST_SIZE; i+=8)
-                        printf("%s\n",pt(&(cfb_buf1[i])));
-                }
-        memcpy(cfb_tmp,cfb_iv,8);
-        n=0;
-        idea_cfb64_encrypt(cfb_buf1,cfb_buf2,(long)17,&eks,
-                cfb_tmp,&n,IDEA_DECRYPT);
-        idea_cfb64_encrypt(&(cfb_buf1[17]),&(cfb_buf2[17]),
-                (long)CFB_TEST_SIZE-17,&dks,
-                cfb_tmp,&n,IDEA_DECRYPT);
-        if (memcmp(plain,cfb_buf2,CFB_TEST_SIZE) != 0)
-                {
-                err=1;
-                printf("idea_cfb_encrypt decrypt error\n");
-                for (i=0; i<24; i+=8)
-                        printf("%s\n",pt(&(cfb_buf2[i])));
-                }
-        return(err);
-        }
-
-static char *pt(unsigned char *p)
-	{
-	static char bufs[10][20];
-	static int bnum=0;
-	char *ret;
-	int i;
-	static char *f="0123456789ABCDEF";
-
-	ret= &(bufs[bnum++][0]);
-	bnum%=10;
-	for (i=0; i<8; i++)
-		{
-		ret[i*2]=f[(p[i]>>4)&0xf];
-		ret[i*2+1]=f[p[i]&0xf];
-		}
-	ret[16]='\0';
-	return(ret);
-	}
-	
-#endif
-#endif
diff --git a/crypto/openssl/crypto/rc2/rrc2.doc b/crypto/openssl/crypto/rc2/rrc2.doc
deleted file mode 100644
index f93ee003d2f8..000000000000
--- a/crypto/openssl/crypto/rc2/rrc2.doc
+++ /dev/null
@@ -1,219 +0,0 @@
->From cygnus.mincom.oz.au!minbne.mincom.oz.au!bunyip.cc.uq.oz.au!munnari.OZ.AU!comp.vuw.ac.nz!waikato!auckland.ac.nz!news Mon Feb 12 18:48:17 EST 1996
-Article 23601 of sci.crypt:
-Path: cygnus.mincom.oz.au!minbne.mincom.oz.au!bunyip.cc.uq.oz.au!munnari.OZ.AU!comp.vuw.ac.nz!waikato!auckland.ac.nz!news
->From: pgut01@cs.auckland.ac.nz (Peter Gutmann)
-Newsgroups: sci.crypt
-Subject: Specification for Ron Rivests Cipher No.2
-Date: 11 Feb 1996 06:45:03 GMT
-Organization: University of Auckland
-Lines: 203
-Sender: pgut01@cs.auckland.ac.nz (Peter Gutmann)
-Message-ID: <4fk39f$f70@net.auckland.ac.nz>
-NNTP-Posting-Host: cs26.cs.auckland.ac.nz
-X-Newsreader: NN version 6.5.0 #3 (NOV)
-
-
-
-
-                           Ron Rivest's Cipher No.2
-                           ------------------------
- 
-Ron Rivest's Cipher No.2 (hereafter referred to as RRC.2, other people may
-refer to it by other names) is word oriented, operating on a block of 64 bits
-divided into four 16-bit words, with a key table of 64 words.  All data units
-are little-endian.  This functional description of the algorithm is based in
-the paper "The RC5 Encryption Algorithm" (RC5 is a trademark of RSADSI), using
-the same general layout, terminology, and pseudocode style.
- 
- 
-Notation and RRC.2 Primitive Operations
- 
-RRC.2 uses the following primitive operations:
- 
-1. Two's-complement addition of words, denoted by "+".  The inverse operation,
-   subtraction, is denoted by "-".
-2. Bitwise exclusive OR, denoted by "^".
-3. Bitwise AND, denoted by "&".
-4. Bitwise NOT, denoted by "~".
-5. A left-rotation of words; the rotation of word x left by y is denoted
-   x <<< y.  The inverse operation, right-rotation, is denoted x >>> y.
- 
-These operations are directly and efficiently supported by most processors.
- 
- 
-The RRC.2 Algorithm
- 
-RRC.2 consists of three components, a *key expansion* algorithm, an
-*encryption* algorithm, and a *decryption* algorithm.
- 
- 
-Key Expansion
- 
-The purpose of the key-expansion routine is to expand the user's key K to fill
-the expanded key array S, so S resembles an array of random binary words
-determined by the user's secret key K.
- 
-Initialising the S-box
- 
-RRC.2 uses a single 256-byte S-box derived from the ciphertext contents of
-Beale Cipher No.1 XOR'd with a one-time pad.  The Beale Ciphers predate modern
-cryptography by enough time that there should be no concerns about trapdoors
-hidden in the data.  They have been published widely, and the S-box can be
-easily recreated from the one-time pad values and the Beale Cipher data taken
-from a standard source.  To initialise the S-box:
- 
-  for i = 0 to 255 do
-    sBox[ i ] = ( beale[ i ] mod 256 ) ^ pad[ i ]
- 
-The contents of Beale Cipher No.1 and the necessary one-time pad are given as
-an appendix at the end of this document.  For efficiency, implementors may wish
-to skip the Beale Cipher expansion and store the sBox table directly.
- 
-Expanding the Secret Key to 128 Bytes
- 
-The secret key is first expanded to fill 128 bytes (64 words).  The expansion
-consists of taking the sum of the first and last bytes in the user key, looking
-up the sum (modulo 256) in the S-box, and appending the result to the key.  The
-operation is repeated with the second byte and new last byte of the key until
-all 128 bytes have been generated.  Note that the following pseudocode treats
-the S array as an array of 128 bytes rather than 64 words.
- 
-  for j = 0 to length-1 do
-    S[ j ] = K[ j ]
-  for j = length to 127 do
-    s[ j ] = sBox[ ( S[ j-length ] + S[ j-1 ] ) mod 256 ];
- 
-At this point it is possible to perform a truncation of the effective key
-length to ease the creation of espionage-enabled software products.  However
-since the author cannot conceive why anyone would want to do this, it will not
-be considered further.
- 
-The final phase of the key expansion involves replacing the first byte of S
-with the entry selected from the S-box:
- 
-  S[ 0 ] = sBox[ S[ 0 ] ]
- 
- 
-Encryption
- 
-The cipher has 16 full rounds, each divided into 4 subrounds.  Two of the full
-rounds perform an additional transformation on the data.  Note that the
-following pseudocode treats the S array as an array of 64 words rather than 128
-bytes.
- 
-  for i = 0 to 15 do
-    j = i * 4;
-    word0 = ( word0 + ( word1 & ~word3 ) + ( word2 & word3 ) + S[ j+0 ] ) <<< 1
-    word1 = ( word1 + ( word2 & ~word0 ) + ( word3 & word0 ) + S[ j+1 ] ) <<< 2
-    word2 = ( word2 + ( word3 & ~word1 ) + ( word0 & word1 ) + S[ j+2 ] ) <<< 3
-    word3 = ( word3 + ( word0 & ~word2 ) + ( word1 & word2 ) + S[ j+3 ] ) <<< 5
- 
-In addition the fifth and eleventh rounds add the contents of the S-box indexed
-by one of the data words to another of the data words following the four
-subrounds as follows:
- 
-    word0 = word0 + S[ word3 & 63 ];
-    word1 = word1 + S[ word0 & 63 ];
-    word2 = word2 + S[ word1 & 63 ];
-    word3 = word3 + S[ word2 & 63 ];
- 
- 
-Decryption
- 
-The decryption operation is simply the inverse of the encryption operation.
-Note that the following pseudocode treats the S array as an array of 64 words
-rather than 128 bytes.
- 
-  for i = 15 downto 0 do
-    j = i * 4;
-    word3 = ( word3 >>> 5 ) - ( word0 & ~word2 ) - ( word1 & word2 ) - S[ j+3 ]
-    word2 = ( word2 >>> 3 ) - ( word3 & ~word1 ) - ( word0 & word1 ) - S[ j+2 ]
-    word1 = ( word1 >>> 2 ) - ( word2 & ~word0 ) - ( word3 & word0 ) - S[ j+1 ]
-    word0 = ( word0 >>> 1 ) - ( word1 & ~word3 ) - ( word2 & word3 ) - S[ j+0 ]
- 
-In addition the fifth and eleventh rounds subtract the contents of the S-box
-indexed by one of the data words from another one of the data words following
-the four subrounds as follows:
- 
-    word3 = word3 - S[ word2 & 63 ]
-    word2 = word2 - S[ word1 & 63 ]
-    word1 = word1 - S[ word0 & 63 ]
-    word0 = word0 - S[ word3 & 63 ]
- 
- 
-Test Vectors
- 
-The following test vectors may be used to test the correctness of an RRC.2
-implementation:
- 
-  Key:      0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-            0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00
-  Plain:    0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00
-  Cipher:   0x1C, 0x19, 0x8A, 0x83, 0x8D, 0xF0, 0x28, 0xB7
- 
-  Key:      0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-            0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x01
-  Plain:    0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00
-  Cipher:   0x21, 0x82, 0x9C, 0x78, 0xA9, 0xF9, 0xC0, 0x74
- 
-  Key:      0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-            0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00
-  Plain:    0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF
-  Cipher:   0x13, 0xDB, 0x35, 0x17, 0xD3, 0x21, 0x86, 0x9E
- 
-  Key:      0x00, 0x01, 0x02, 0x03, 0x04, 0x05, 0x06, 0x07,
-            0x08, 0x09, 0x0A, 0x0B, 0x0C, 0x0D, 0x0E, 0x0F
-  Plain:    0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00
-  Cipher:   0x50, 0xDC, 0x01, 0x62, 0xBD, 0x75, 0x7F, 0x31
- 
- 
-Appendix: Beale Cipher No.1, "The Locality of the Vault", and One-time Pad for
-          Creating the S-Box
- 
-Beale Cipher No.1.
- 
-  71, 194,  38,1701,  89,  76,  11,  83,1629,  48,  94,  63, 132,  16, 111,  95,
-  84, 341, 975,  14,  40,  64,  27,  81, 139, 213,  63,  90,1120,   8,  15,   3,
- 126,2018,  40,  74, 758, 485, 604, 230, 436, 664, 582, 150, 251, 284, 308, 231,
- 124, 211, 486, 225, 401, 370,  11, 101, 305, 139, 189,  17,  33,  88, 208, 193,
- 145,   1,  94,  73, 416, 918, 263,  28, 500, 538, 356, 117, 136, 219,  27, 176,
- 130,  10, 460,  25, 485,  18, 436,  65,  84, 200, 283, 118, 320, 138,  36, 416,
- 280,  15,  71, 224, 961,  44,  16, 401,  39,  88,  61, 304,  12,  21,  24, 283,
- 134,  92,  63, 246, 486, 682,   7, 219, 184, 360, 780,  18,  64, 463, 474, 131,
- 160,  79,  73, 440,  95,  18,  64, 581,  34,  69, 128, 367, 460,  17,  81,  12,
- 103, 820,  62, 110,  97, 103, 862,  70,  60,1317, 471, 540, 208, 121, 890, 346,
-  36, 150,  59, 568, 614,  13, 120,  63, 219, 812,2160,1780,  99,  35,  18,  21,
- 136, 872,  15,  28, 170,  88,   4,  30,  44, 112,  18, 147, 436, 195, 320,  37,
- 122, 113,   6, 140,   8, 120, 305,  42,  58, 461,  44, 106, 301,  13, 408, 680,
-  93,  86, 116, 530,  82, 568,   9, 102,  38, 416,  89,  71, 216, 728, 965, 818,
-   2,  38, 121, 195,  14, 326, 148, 234,  18,  55, 131, 234, 361, 824,   5,  81,
- 623,  48, 961,  19,  26,  33,  10,1101, 365,  92,  88, 181, 275, 346, 201, 206
- 
-One-time Pad.
- 
- 158, 186, 223,  97,  64, 145, 190, 190, 117, 217, 163,  70, 206, 176, 183, 194,
- 146,  43, 248, 141,   3,  54,  72, 223, 233, 153,  91, 210,  36, 131, 244, 161,
- 105, 120, 113, 191, 113,  86,  19, 245, 213, 221,  43,  27, 242, 157,  73, 213,
- 193,  92, 166,  10,  23, 197, 112, 110, 193,  30, 156,  51, 125,  51, 158,  67,
- 197, 215,  59, 218, 110, 246, 181,   0, 135,  76, 164,  97,  47,  87, 234, 108,
- 144, 127,   6,   6, 222, 172,  80, 144,  22, 245, 207,  70, 227, 182, 146, 134,
- 119, 176,  73,  58, 135,  69,  23, 198,   0, 170,  32, 171, 176, 129,  91,  24,
- 126,  77, 248,   0, 118,  69,  57,  60, 190, 171, 217,  61, 136, 169, 196,  84,
- 168, 167, 163, 102, 223,  64, 174, 178, 166, 239, 242, 195, 249,  92,  59,  38,
- 241,  46, 236,  31,  59, 114,  23,  50, 119, 186,   7,  66, 212,  97, 222, 182,
- 230, 118, 122,  86, 105,  92, 179, 243, 255, 189, 223, 164, 194, 215,  98,  44,
-  17,  20,  53, 153, 137, 224, 176, 100, 208, 114,  36, 200, 145, 150, 215,  20,
-  87,  44, 252,  20, 235, 242, 163, 132,  63,  18,   5, 122,  74,  97,  34,  97,
- 142,  86, 146, 221, 179, 166, 161,  74,  69, 182,  88, 120, 128,  58,  76, 155,
-  15,  30,  77, 216, 165, 117, 107,  90, 169, 127, 143, 181, 208, 137, 200, 127,
- 170, 195,  26,  84, 255, 132, 150,  58, 103, 250, 120, 221, 237,  37,   8,  99
- 
- 
-Implementation
- 
-A non-US based programmer who has never seen any encryption code before will
-shortly be implementing RRC.2 based solely on this specification and not on
-knowledge of any other encryption algorithms.  Stand by.
-
-
-
diff --git a/crypto/openssl/crypto/rc2/tab.c b/crypto/openssl/crypto/rc2/tab.c
deleted file mode 100644
index 25dc14eeba1d..000000000000
--- a/crypto/openssl/crypto/rc2/tab.c
+++ /dev/null
@@ -1,86 +0,0 @@
-#include <stdio.h>
-
-unsigned char ebits_to_num[256]={
-	0xbd,0x56,0xea,0xf2,0xa2,0xf1,0xac,0x2a,
-	0xb0,0x93,0xd1,0x9c,0x1b,0x33,0xfd,0xd0,
-	0x30,0x04,0xb6,0xdc,0x7d,0xdf,0x32,0x4b,
-	0xf7,0xcb,0x45,0x9b,0x31,0xbb,0x21,0x5a,
-	0x41,0x9f,0xe1,0xd9,0x4a,0x4d,0x9e,0xda,
-	0xa0,0x68,0x2c,0xc3,0x27,0x5f,0x80,0x36,
-	0x3e,0xee,0xfb,0x95,0x1a,0xfe,0xce,0xa8,
-	0x34,0xa9,0x13,0xf0,0xa6,0x3f,0xd8,0x0c,
-	0x78,0x24,0xaf,0x23,0x52,0xc1,0x67,0x17,
-	0xf5,0x66,0x90,0xe7,0xe8,0x07,0xb8,0x60,
-	0x48,0xe6,0x1e,0x53,0xf3,0x92,0xa4,0x72,
-	0x8c,0x08,0x15,0x6e,0x86,0x00,0x84,0xfa,
-	0xf4,0x7f,0x8a,0x42,0x19,0xf6,0xdb,0xcd,
-	0x14,0x8d,0x50,0x12,0xba,0x3c,0x06,0x4e,
-	0xec,0xb3,0x35,0x11,0xa1,0x88,0x8e,0x2b,
-	0x94,0x99,0xb7,0x71,0x74,0xd3,0xe4,0xbf,
-	0x3a,0xde,0x96,0x0e,0xbc,0x0a,0xed,0x77,
-	0xfc,0x37,0x6b,0x03,0x79,0x89,0x62,0xc6,
-	0xd7,0xc0,0xd2,0x7c,0x6a,0x8b,0x22,0xa3,
-	0x5b,0x05,0x5d,0x02,0x75,0xd5,0x61,0xe3,
-	0x18,0x8f,0x55,0x51,0xad,0x1f,0x0b,0x5e,
-	0x85,0xe5,0xc2,0x57,0x63,0xca,0x3d,0x6c,
-	0xb4,0xc5,0xcc,0x70,0xb2,0x91,0x59,0x0d,
-	0x47,0x20,0xc8,0x4f,0x58,0xe0,0x01,0xe2,
-	0x16,0x38,0xc4,0x6f,0x3b,0x0f,0x65,0x46,
-	0xbe,0x7e,0x2d,0x7b,0x82,0xf9,0x40,0xb5,
-	0x1d,0x73,0xf8,0xeb,0x26,0xc7,0x87,0x97,
-	0x25,0x54,0xb1,0x28,0xaa,0x98,0x9d,0xa5,
-	0x64,0x6d,0x7a,0xd4,0x10,0x81,0x44,0xef,
-	0x49,0xd6,0xae,0x2e,0xdd,0x76,0x5c,0x2f,
-	0xa7,0x1c,0xc9,0x09,0x69,0x9a,0x83,0xcf,
-	0x29,0x39,0xb9,0xe9,0x4c,0xff,0x43,0xab,
-	};
-
-unsigned char num_to_ebits[256]={
-	0x5d,0xbe,0x9b,0x8b,0x11,0x99,0x6e,0x4d,
-	0x59,0xf3,0x85,0xa6,0x3f,0xb7,0x83,0xc5,
-	0xe4,0x73,0x6b,0x3a,0x68,0x5a,0xc0,0x47,
-	0xa0,0x64,0x34,0x0c,0xf1,0xd0,0x52,0xa5,
-	0xb9,0x1e,0x96,0x43,0x41,0xd8,0xd4,0x2c,
-	0xdb,0xf8,0x07,0x77,0x2a,0xca,0xeb,0xef,
-	0x10,0x1c,0x16,0x0d,0x38,0x72,0x2f,0x89,
-	0xc1,0xf9,0x80,0xc4,0x6d,0xae,0x30,0x3d,
-	0xce,0x20,0x63,0xfe,0xe6,0x1a,0xc7,0xb8,
-	0x50,0xe8,0x24,0x17,0xfc,0x25,0x6f,0xbb,
-	0x6a,0xa3,0x44,0x53,0xd9,0xa2,0x01,0xab,
-	0xbc,0xb6,0x1f,0x98,0xee,0x9a,0xa7,0x2d,
-	0x4f,0x9e,0x8e,0xac,0xe0,0xc6,0x49,0x46,
-	0x29,0xf4,0x94,0x8a,0xaf,0xe1,0x5b,0xc3,
-	0xb3,0x7b,0x57,0xd1,0x7c,0x9c,0xed,0x87,
-	0x40,0x8c,0xe2,0xcb,0x93,0x14,0xc9,0x61,
-	0x2e,0xe5,0xcc,0xf6,0x5e,0xa8,0x5c,0xd6,
-	0x75,0x8d,0x62,0x95,0x58,0x69,0x76,0xa1,
-	0x4a,0xb5,0x55,0x09,0x78,0x33,0x82,0xd7,
-	0xdd,0x79,0xf5,0x1b,0x0b,0xde,0x26,0x21,
-	0x28,0x74,0x04,0x97,0x56,0xdf,0x3c,0xf0,
-	0x37,0x39,0xdc,0xff,0x06,0xa4,0xea,0x42,
-	0x08,0xda,0xb4,0x71,0xb0,0xcf,0x12,0x7a,
-	0x4e,0xfa,0x6c,0x1d,0x84,0x00,0xc8,0x7f,
-	0x91,0x45,0xaa,0x2b,0xc2,0xb1,0x8f,0xd5,
-	0xba,0xf2,0xad,0x19,0xb2,0x67,0x36,0xf7,
-	0x0f,0x0a,0x92,0x7d,0xe3,0x9d,0xe9,0x90,
-	0x3e,0x23,0x27,0x66,0x13,0xec,0x81,0x15,
-	0xbd,0x22,0xbf,0x9f,0x7e,0xa9,0x51,0x4b,
-	0x4c,0xfb,0x02,0xd3,0x70,0x86,0x31,0xe7,
-	0x3b,0x05,0x03,0x54,0x60,0x48,0x65,0x18,
-	0xd2,0xcd,0x5f,0x32,0x88,0x0e,0x35,0xfd,
-	};
-	
-main()
-	{
-	int i,j;
-
-	for (i=0; i<256; i++)
-		{
-		for (j=0; j<256; j++)
-			if (ebits_to_num[j] == i)
-				{
-				printf("0x%02x,",j);
-				break;
-				}
-		}
-	}
diff --git a/crypto/openssl/crypto/rc2/version b/crypto/openssl/crypto/rc2/version
deleted file mode 100644
index 6f89d595f179..000000000000
--- a/crypto/openssl/crypto/rc2/version
+++ /dev/null
@@ -1,22 +0,0 @@
-1.1 23/08/96 - eay
-	Changed RC2_set_key() so it now takes another argument.  Many
-	thanks to Peter Gutmann <pgut01@cs.auckland.ac.nz> for the
-	clarification and origional specification of RC2.  BSAFE uses
-	this last parameter, 'bits'.  It the key is 128 bits, BSAFE
-	also sets this parameter to 128.  The old behaviour can be
-	duplicated by setting this parameter to 1024.
-
-1.0 08/04/96 - eay
-	First version of SSLeay with rc2.  This has been written from the spec
-	posted sci.crypt.  It is in this directory under rrc2.doc
-	I have no test values for any mode other than ecb, my wrappers for the
-	other modes should be ok since they are basically the same as
-	the ones taken from idea and des :-).  I have implemented them as
-	little-endian operators.
-	While rc2 is included because it is used with SSL, I don't know how
-	far I trust it.  It is about the same speed as IDEA and DES.
-	So if you are paranoid, used Tripple DES, else IDEA.  If RC2
-	does get used more, perhaps more people will look for weaknesses in
-	it.
-	
-
diff --git a/crypto/openssl/crypto/rc4/Makefile b/crypto/openssl/crypto/rc4/Makefile
deleted file mode 100644
index 7857c95fbfcd..000000000000
--- a/crypto/openssl/crypto/rc4/Makefile
+++ /dev/null
@@ -1,115 +0,0 @@
-#
-# OpenSSL/crypto/rc4/Makefile
-#
-
-DIR=	rc4
-TOP=	../..
-CC=	cc
-CPP=    $(CC) -E
-INCLUDES=
-CFLAG=-g
-AR=		ar r
-
-RC4_ENC=rc4_enc.o
-
-CFLAGS= $(INCLUDES) $(CFLAG)
-ASFLAGS= $(INCLUDES) $(ASFLAG)
-AFLAGS= $(ASFLAGS)
-
-GENERAL=Makefile
-TEST=rc4test.c
-APPS=
-
-LIB=$(TOP)/libcrypto.a
-LIBSRC=rc4_skey.c rc4_enc.c
-LIBOBJ=rc4_skey.o $(RC4_ENC)
-
-SRC= $(LIBSRC)
-
-EXHEADER= rc4.h
-HEADER=	$(EXHEADER) rc4_locl.h
-
-ALL=    $(GENERAL) $(SRC) $(HEADER)
-
-top:
-	(cd ../..; $(MAKE) DIRS=crypto SDIRS=$(DIR) sub_all)
-
-all:	lib
-
-lib:	$(LIBOBJ)
-	$(AR) $(LIB) $(LIBOBJ)
-	$(RANLIB) $(LIB) || echo Never mind.
-	@touch lib
-
-# ELF
-rx86-elf.s: asm/rc4-586.pl ../perlasm/x86asm.pl
-	(cd asm; $(PERL) rc4-586.pl elf $(CFLAGS) > ../$@)
-# COFF
-rx86-cof.s: asm/rc4-586.pl ../perlasm/x86asm.pl
-	(cd asm; $(PERL) rc4-586.pl coff $(CFLAGS) > ../$@)
-# a.out
-rx86-out.s: asm/rc4-586.pl ../perlasm/x86asm.pl
-	(cd asm; $(PERL) rc4-586.pl a.out $(CFLAGS) > ../$@)
-
-rc4-x86_64.s: asm/rc4-x86_64.pl;	$(PERL) asm/rc4-x86_64.pl $@
-
-rc4-ia64.s: asm/rc4-ia64.S
-	@case `awk '/^#define RC4_INT/{print$$NF}' $(TOP)/include/openssl/opensslconf.h` in \
-	int)	set -x; $(CC) $(CFLAGS) -DSZ=4 -E asm/rc4-ia64.S > $@ ;; \
-	char)	set -x; $(CC) $(CFLAGS) -DSZ=1 -E asm/rc4-ia64.S > $@ ;; \
-	*)	exit 1 ;; \
-	esac
-
-files:
-	$(PERL) $(TOP)/util/files.pl Makefile >> $(TOP)/MINFO
-
-links:
-	@$(PERL) $(TOP)/util/mklink.pl ../../include/openssl $(EXHEADER)
-	@$(PERL) $(TOP)/util/mklink.pl ../../test $(TEST)
-	@$(PERL) $(TOP)/util/mklink.pl ../../apps $(APPS)
-
-install:
-	@[ -n "$(INSTALLTOP)" ] # should be set by top Makefile...
-	@headerlist="$(EXHEADER)"; for i in $$headerlist ; \
-	do  \
-	(cp $$i $(INSTALL_PREFIX)$(INSTALLTOP)/include/openssl/$$i; \
-	chmod 644 $(INSTALL_PREFIX)$(INSTALLTOP)/include/openssl/$$i ); \
-	done;
-
-tags:
-	ctags $(SRC)
-
-tests:
-
-lint:
-	lint -DLINT $(INCLUDES) $(SRC)>fluff
-
-depend:
-	@[ -n "$(MAKEDEPEND)" ] # should be set by upper Makefile...
-	$(MAKEDEPEND) -- $(CFLAG) $(INCLUDES) $(DEPFLAG) -- $(PROGS) $(LIBSRC)
-
-dclean:
-	$(PERL) -pe 'if (/^# DO NOT DELETE THIS LINE/) {print; exit(0);}' $(MAKEFILE) >Makefile.new
-	mv -f Makefile.new $(MAKEFILE)
-
-clean:
-	rm -f *.s *.o *.obj lib tags core .pure .nfs* *.old *.bak fluff
-
-# DO NOT DELETE THIS LINE -- make depend depends on it.
-
-rc4_enc.o: ../../e_os.h ../../include/openssl/bio.h
-rc4_enc.o: ../../include/openssl/buffer.h ../../include/openssl/crypto.h
-rc4_enc.o: ../../include/openssl/e_os2.h ../../include/openssl/err.h
-rc4_enc.o: ../../include/openssl/lhash.h ../../include/openssl/opensslconf.h
-rc4_enc.o: ../../include/openssl/opensslv.h ../../include/openssl/ossl_typ.h
-rc4_enc.o: ../../include/openssl/rc4.h ../../include/openssl/safestack.h
-rc4_enc.o: ../../include/openssl/stack.h ../../include/openssl/symhacks.h
-rc4_enc.o: ../cryptlib.h rc4_enc.c rc4_locl.h
-rc4_skey.o: ../../e_os.h ../../include/openssl/bio.h
-rc4_skey.o: ../../include/openssl/buffer.h ../../include/openssl/crypto.h
-rc4_skey.o: ../../include/openssl/e_os2.h ../../include/openssl/err.h
-rc4_skey.o: ../../include/openssl/lhash.h ../../include/openssl/opensslconf.h
-rc4_skey.o: ../../include/openssl/opensslv.h ../../include/openssl/ossl_typ.h
-rc4_skey.o: ../../include/openssl/rc4.h ../../include/openssl/safestack.h
-rc4_skey.o: ../../include/openssl/stack.h ../../include/openssl/symhacks.h
-rc4_skey.o: ../cryptlib.h rc4_locl.h rc4_skey.c
diff --git a/crypto/openssl/crypto/rc4/asm/rc4-586.pl b/crypto/openssl/crypto/rc4/asm/rc4-586.pl
deleted file mode 100644
index 22bda4b451e9..000000000000
--- a/crypto/openssl/crypto/rc4/asm/rc4-586.pl
+++ /dev/null
@@ -1,230 +0,0 @@
-#!/usr/local/bin/perl
-
-# At some point it became apparent that the original SSLeay RC4
-# assembler implementation performs suboptimaly on latest IA-32
-# microarchitectures. After re-tuning performance has changed as
-# following:
-#
-# Pentium	+0%
-# Pentium III	+17%
-# AMD		+52%(*)
-# P4		+180%(**)
-#
-# (*)	This number is actually a trade-off:-) It's possible to
-#	achieve	+72%, but at the cost of -48% off PIII performance.
-#	In other words code performing further 13% faster on AMD
-#	would perform almost 2 times slower on Intel PIII...
-#	For reference! This code delivers ~80% of rc4-amd64.pl
-#	performance on the same Opteron machine.
-# (**)	This number requires compressed key schedule set up by
-#	RC4_set_key and therefore doesn't apply to 0.9.7 [option for
-#	compressed key schedule is implemented in 0.9.8 and later,
-#	see commentary section in rc4_skey.c for further details].
-#
-#					<appro@fy.chalmers.se>
-
-push(@INC,"perlasm","../../perlasm");
-require "x86asm.pl";
-
-&asm_init($ARGV[0],"rc4-586.pl");
-
-$x="eax";
-$y="ebx";
-$tx="ecx";
-$ty="edx";
-$in="esi";
-$out="edi";
-$d="ebp";
-
-&RC4("RC4");
-
-&asm_finish();
-
-sub RC4_loop
-	{
-	local($n,$p,$char)=@_;
-
-	&comment("Round $n");
-
-	if ($char)
-		{
-		if ($p >= 0)
-			{
-			 &mov($ty,	&swtmp(2));
-			&cmp($ty,	$in);
-			 &jbe(&label("finished"));
-			&inc($in);
-			}
-		else
-			{
-			&add($ty,	8);
-			 &inc($in);
-			&cmp($ty,	$in);
-			 &jb(&label("finished"));
-			&mov(&swtmp(2),	$ty);
-			}
-		}
-	# Moved out
-	# &mov(	$tx,		&DWP(0,$d,$x,4)) if $p < 0;
-
-	&add(	&LB($y),	&LB($tx));
-	&mov(	$ty,		&DWP(0,$d,$y,4));
-	 # XXX
-	&mov(	&DWP(0,$d,$x,4),$ty);
-	 &add(	$ty,		$tx);
-	&mov(	&DWP(0,$d,$y,4),$tx);
-	 &and(	$ty,		0xff);
-	 &inc(	&LB($x));			# NEXT ROUND
-	&mov(	$tx,		&DWP(0,$d,$x,4)) if $p < 1; # NEXT ROUND
-	 &mov(	$ty,		&DWP(0,$d,$ty,4));
-
-	if (!$char)
-		{
-		#moved up into last round
-		if ($p >= 1)
-			{
-			&add(	$out,	8)
-			}
-		&movb(	&BP($n,"esp","",0),	&LB($ty));
-		}
-	else
-		{
-		# Note in+=8 has occured
-		&movb(	&HB($ty),	&BP(-1,$in,"",0));
-		 # XXX
-		&xorb(&LB($ty),		&HB($ty));
-		 # XXX
-		&movb(&BP($n,$out,"",0),&LB($ty));
-		}
-	}
-
-
-sub RC4
-	{
-	local($name)=@_;
-
-	&function_begin_B($name,"");
-
-	&mov($ty,&wparam(1));		# len
-	&cmp($ty,0);
-	&jne(&label("proceed"));
-	&ret();
-	&set_label("proceed");
-
-	&comment("");
-
-	&push("ebp");
-	 &push("ebx");
-	&push("esi");
-	 &xor(	$x,	$x);		# avoid partial register stalls
-	&push("edi");
-	 &xor(	$y,	$y);		# avoid partial register stalls
-	&mov(	$d,	&wparam(0));	# key
-	 &mov(	$in,	&wparam(2));
-
-	&movb(	&LB($x),	&BP(0,$d,"",1));
-	 &movb(	&LB($y),	&BP(4,$d,"",1));
-
-	&mov(	$out,	&wparam(3));
-	 &inc(	&LB($x));
-
-	&stack_push(3);	# 3 temp variables
-	 &add(	$d,	8);
-
-	# detect compressed schedule, see commentary section in rc4_skey.c...
-	# in 0.9.7 context ~50 bytes below RC4_CHAR label remain redundant,
-	# as compressed key schedule is set up in 0.9.8 and later.
-	&cmp(&DWP(256,$d),-1);
-	&je(&label("RC4_CHAR"));
-
-	 &lea(	$ty,	&DWP(-8,$ty,$in));
-
-	# check for 0 length input
-
-	 &mov(	&swtmp(2),	$ty);	# this is now address to exit at
-	&mov(	$tx,	&DWP(0,$d,$x,4));
-
-	 &cmp(	$ty,	$in);
-	&jb(	&label("end")); # less than 8 bytes
-
-	&set_label("start");
-
-	# filling DELAY SLOT
-	&add(	$in,	8);
-
-	&RC4_loop(0,-1,0);
-	&RC4_loop(1,0,0);
-	&RC4_loop(2,0,0);
-	&RC4_loop(3,0,0);
-	&RC4_loop(4,0,0);
-	&RC4_loop(5,0,0);
-	&RC4_loop(6,0,0);
-	&RC4_loop(7,1,0);
-	
-	&comment("apply the cipher text");
-	# xor the cipher data with input
-
-	#&add(	$out,	8); #moved up into last round
-
-	&mov(	$tx,	&swtmp(0));
-	 &mov(	$ty,	&DWP(-8,$in,"",0));
-	&xor(	$tx,	$ty);
-	 &mov(	$ty,	&DWP(-4,$in,"",0)); 
-	&mov(	&DWP(-8,$out,"",0),	$tx);
-	 &mov(	$tx,	&swtmp(1));
-	&xor(	$tx,	$ty);
-	 &mov(	$ty,	&swtmp(2));	# load end ptr;
-	&mov(	&DWP(-4,$out,"",0),	$tx);
-	 &mov(	$tx,		&DWP(0,$d,$x,4));
-	&cmp($in,	$ty);
-	 &jbe(&label("start"));
-
-	&set_label("end");
-
-	# There is quite a bit of extra crap in RC4_loop() for this
-	# first round
-	&RC4_loop(0,-1,1);
-	&RC4_loop(1,0,1);
-	&RC4_loop(2,0,1);
-	&RC4_loop(3,0,1);
-	&RC4_loop(4,0,1);
-	&RC4_loop(5,0,1);
-	&RC4_loop(6,1,1);
-
-	&jmp(&label("finished"));
-
-	&align(16);
-	# this is essentially Intel P4 specific codepath, see rc4_skey.c,
-	# and is engaged in 0.9.8 and later context...
-	&set_label("RC4_CHAR");
-
-	&lea	($ty,&DWP(0,$in,$ty));
-	&mov	(&swtmp(2),$ty);
-	&movz	($tx,&BP(0,$d,$x));
-
-	# strangely enough unrolled loop performs over 20% slower...
-	&set_label("RC4_CHAR_loop");
-		&add	(&LB($y),&LB($tx));
-		&movz	($ty,&BP(0,$d,$y));
-		&movb	(&BP(0,$d,$y),&LB($tx));
-		&movb	(&BP(0,$d,$x),&LB($ty));
-		&add	(&LB($ty),&LB($tx));
-		&movz	($ty,&BP(0,$d,$ty));
-		&add	(&LB($x),1);
-		&xorb	(&LB($ty),&BP(0,$in));
-		&lea	($in,&BP(1,$in));
-		&movz	($tx,&BP(0,$d,$x));
-		&cmp	($in,&swtmp(2));
-		&movb	(&BP(0,$out),&LB($ty));
-		&lea	($out,&BP(1,$out));
-	&jb	(&label("RC4_CHAR_loop"));
-
-	&set_label("finished");
-	&dec(	$x);
-	 &stack_pop(3);
-	&movb(	&BP(-4,$d,"",0),&LB($y));
-	 &movb(	&BP(-8,$d,"",0),&LB($x));
-
-	&function_end($name);
-	}
-
diff --git a/crypto/openssl/crypto/rc4/asm/rc4-ia64.S b/crypto/openssl/crypto/rc4/asm/rc4-ia64.S
deleted file mode 100644
index a322d0c718e5..000000000000
--- a/crypto/openssl/crypto/rc4/asm/rc4-ia64.S
+++ /dev/null
@@ -1,160 +0,0 @@
-// ====================================================================
-// Written by Andy Polyakov <appro@fy.chalmers.se> for the OpenSSL
-// project.
-//
-// Rights for redistribution and usage in source and binary forms are
-// granted according to the OpenSSL license. Warranty of any kind is
-// disclaimed.
-// ====================================================================
-
-.ident  "rc4-ia64.S, Version 2.0"
-.ident  "IA-64 ISA artwork by Andy Polyakov <appro@fy.chalmers.se>"
-
-// What's wrong with compiler generated code? Because of the nature of
-// C language, compiler doesn't [dare to] reorder load and stores. But
-// being memory-bound, RC4 should benefit from reorder [on in-order-
-// execution core such as IA-64]. But what can we reorder? At the very
-// least we can safely reorder references to key schedule in respect
-// to input and output streams. Secondly, from the first [close] glance
-// it appeared that it's possible to pull up some references to
-// elements of the key schedule itself. Original rationale ["prior
-// loads are not safe only for "degenerated" key schedule, when some
-// elements equal to the same value"] was kind of sloppy. I should have
-// formulated as it really was: if we assume that pulling up reference
-// to key[x+1] is not safe, then it would mean that key schedule would
-// "degenerate," which is never the case. The problem is that this
-// holds true in respect to references to key[x], but not to key[y].
-// Legitimate "collisions" do occur within every 256^2 bytes window.
-// Fortunately there're enough free instruction slots to keep prior
-// reference to key[x+1], detect "collision" and compensate for it.
-// All this without sacrificing a single clock cycle:-) Throughput is
-// ~210MBps on 900MHz CPU, which is is >3x faster than gcc generated
-// code and +30% - if compared to HP-UX C. Unrolling loop below should
-// give >30% on top of that...
-
-.text
-.explicit
-
-#if defined(_HPUX_SOURCE) && !defined(_LP64)
-# define ADDP	addp4
-#else
-# define ADDP	add
-#endif
-
-#ifndef SZ
-#define SZ	4	// this is set to sizeof(RC4_INT)
-#endif
-// SZ==4 seems to be optimal. At least SZ==8 is not any faster, not for
-// assembler implementation, while SZ==1 code is ~30% slower.
-#if SZ==1	// RC4_INT is unsigned char
-# define	LDKEY	ld1
-# define	STKEY	st1
-# define	OFF	0
-#elif SZ==4	// RC4_INT is unsigned int
-# define	LDKEY	ld4
-# define	STKEY	st4
-# define	OFF	2
-#elif SZ==8	// RC4_INT is unsigned long
-# define	LDKEY	ld8
-# define	STKEY	st8
-# define	OFF	3
-#endif
-
-out=r8;		// [expanded] output pointer
-inp=r9;		// [expanded] output pointer
-prsave=r10;
-key=r28;	// [expanded] pointer to RC4_KEY
-ksch=r29;	// (key->data+255)[&~(sizeof(key->data)-1)]
-xx=r30;
-yy=r31;
-
-// void RC4(RC4_KEY *key,size_t len,const void *inp,void *out);
-.global	RC4#
-.proc	RC4#
-.align	32
-.skip	16
-RC4:
-	.prologue
-	.fframe 0
-	.save   ar.pfs,r2
-	.save	ar.lc,r3
-	.save	pr,prsave
-{ .mii;	alloc	r2=ar.pfs,4,12,0,16
-	mov	prsave=pr
-	ADDP	key=0,in0		};;
-{ .mib;	cmp.eq	p6,p0=0,in1			// len==0?
-	mov	r3=ar.lc
-(p6)	br.ret.spnt.many	b0	};;	// emergency exit
-
-	.body
-	.rotr	dat[4],key_x[4],tx[2],rnd[2],key_y[2],ty[1];
-
-{ .mib;	LDKEY	xx=[key],SZ			// load key->x
-	add	in1=-1,in1			// adjust len for loop counter
-	nop.b	0			}
-{ .mib;	ADDP	inp=0,in2
-	ADDP	out=0,in3
-	brp.loop.imp	.Ltop,.Lexit-16	};;
-{ .mmi;	LDKEY	yy=[key]			// load key->y
-	add	ksch=SZ,key
-	mov	ar.lc=in1		}
-{ .mmi;	mov	key_y[1]=r0			// guarantee inequality
-						// in first iteration
-	add	xx=1,xx
-	mov	pr.rot=1<<16		};;
-{ .mii;	nop.m	0
-	dep	key_x[1]=xx,r0,OFF,8
-	mov	ar.ec=3			};;	// note that epilogue counter
-						// is off by 1. I compensate
-						// for this at exit...
-.Ltop:
-// The loop is scheduled for 4*(n+2) spin-rate on Itanium 2, which
-// theoretically gives asymptotic performance of clock frequency
-// divided by 4 bytes per seconds, or 400MBps on 1.6GHz CPU. This is
-// for sizeof(RC4_INT)==4. For smaller RC4_INT STKEY inadvertently
-// splits the last bundle and you end up with 5*n spin-rate:-(
-// Originally the loop was scheduled for 3*n and relied on key
-// schedule to be aligned at 256*sizeof(RC4_INT) boundary. But
-// *(out++)=dat, which maps to st1, had same effect [inadvertent
-// bundle split] and holded the loop back. Rescheduling for 4*n
-// made it possible to eliminate dependence on specific alignment
-// and allow OpenSSH keep "abusing" our API. Reaching for 3*n would
-// require unrolling, sticking to variable shift instruction for
-// collecting output [to avoid starvation for integer shifter] and
-// copying of key schedule to controlled place in stack [so that
-// deposit instruction can serve as substitute for whole
-// key->data+((x&255)<<log2(sizeof(key->data[0])))]...
-{ .mmi;	(p19)	st1	[out]=dat[3],1			// *(out++)=dat
-	(p16)	add	xx=1,xx				// x++
-	(p18)	dep	rnd[1]=rnd[1],r0,OFF,8	}	// ((tx+ty)&255)<<OFF
-{ .mmi;	(p16)	add	key_x[1]=ksch,key_x[1]		// &key[xx&255]
-	(p17)	add	key_y[1]=ksch,key_y[1]	};;	// &key[yy&255]	
-{ .mmi;	(p16)	LDKEY	tx[0]=[key_x[1]]		// tx=key[xx]
-	(p17)	LDKEY	ty[0]=[key_y[1]]		// ty=key[yy]	
-	(p16)	dep	key_x[0]=xx,r0,OFF,8	}	// (xx&255)<<OFF
-{ .mmi;	(p18)	add	rnd[1]=ksch,rnd[1]		// &key[(tx+ty)&255]
-	(p16)	cmp.ne.unc p20,p21=key_x[1],key_y[1] };;
-{ .mmi;	(p18)	LDKEY	rnd[1]=[rnd[1]]			// rnd=key[(tx+ty)&255]
-	(p16)	ld1	dat[0]=[inp],1		}	// dat=*(inp++)
-.pred.rel	"mutex",p20,p21
-{ .mmi;	(p21)	add	yy=yy,tx[1]			// (p16)
-	(p20)	add	yy=yy,tx[0]			// (p16) y+=tx
-	(p21)	mov	tx[0]=tx[1]		};;	// (p16)
-{ .mmi;	(p17)	STKEY	[key_y[1]]=tx[1]		// key[yy]=tx
-	(p17)	STKEY	[key_x[2]]=ty[0]		// key[xx]=ty
-	(p16)	dep	key_y[0]=yy,r0,OFF,8	}	// &key[yy&255]
-{ .mmb;	(p17)	add	rnd[0]=tx[1],ty[0]		// tx+=ty
-	(p18)	xor	dat[2]=dat[2],rnd[1]		// dat^=rnd
-	br.ctop.sptk	.Ltop			};;
-.Lexit:
-{ .mib;	STKEY	[key]=yy,-SZ			// save key->y
-	mov	pr=prsave,0x1ffff
-	nop.b	0			}
-{ .mib;	st1	[out]=dat[3],1			// compensate for truncated
-						// epilogue counter
-	add	xx=-1,xx
-	nop.b	0			};;
-{ .mib;	STKEY	[key]=xx			// save key->x
-	mov	ar.lc=r3
-	br.ret.sptk.many	b0	};;
-.endp	RC4#
diff --git a/crypto/openssl/crypto/rc4/asm/rc4-x86_64.pl b/crypto/openssl/crypto/rc4/asm/rc4-x86_64.pl
deleted file mode 100755
index 4b990cba077e..000000000000
--- a/crypto/openssl/crypto/rc4/asm/rc4-x86_64.pl
+++ /dev/null
@@ -1,240 +0,0 @@
-#!/usr/bin/env perl
-#
-# ====================================================================
-# Written by Andy Polyakov <appro@fy.chalmers.se> for the OpenSSL
-# project. Rights for redistribution and usage in source and binary
-# forms are granted according to the OpenSSL license.
-# ====================================================================
-#
-# 2.22x RC4 tune-up:-) It should be noted though that my hand [as in
-# "hand-coded assembler"] doesn't stand for the whole improvement
-# coefficient. It turned out that eliminating RC4_CHAR from config
-# line results in ~40% improvement (yes, even for C implementation).
-# Presumably it has everything to do with AMD cache architecture and
-# RAW or whatever penalties. Once again! The module *requires* config
-# line *without* RC4_CHAR! As for coding "secret," I bet on partial
-# register arithmetics. For example instead of 'inc %r8; and $255,%r8'
-# I simply 'inc %r8b'. Even though optimization manual discourages
-# to operate on partial registers, it turned out to be the best bet.
-# At least for AMD... How IA32E would perform remains to be seen...
-
-# As was shown by Marc Bevand reordering of couple of load operations
-# results in even higher performance gain of 3.3x:-) At least on
-# Opteron... For reference, 1x in this case is RC4_CHAR C-code
-# compiled with gcc 3.3.2, which performs at ~54MBps per 1GHz clock.
-# Latter means that if you want to *estimate* what to expect from
-# *your* Opteron, then multiply 54 by 3.3 and clock frequency in GHz.
-
-# Intel P4 EM64T core was found to run the AMD64 code really slow...
-# The only way to achieve comparable performance on P4 was to keep
-# RC4_CHAR. Kind of ironic, huh? As it's apparently impossible to
-# compose blended code, which would perform even within 30% marginal
-# on either AMD and Intel platforms, I implement both cases. See
-# rc4_skey.c for further details...
-
-# P4 EM64T core appears to be "allergic" to 64-bit inc/dec. Replacing 
-# those with add/sub results in 50% performance improvement of folded
-# loop...
-
-# As was shown by Zou Nanhai loop unrolling can improve Intel EM64T
-# performance by >30% [unlike P4 32-bit case that is]. But this is
-# provided that loads are reordered even more aggressively! Both code
-# pathes, AMD64 and EM64T, reorder loads in essentially same manner
-# as my IA-64 implementation. On Opteron this resulted in modest 5%
-# improvement [I had to test it], while final Intel P4 performance
-# achieves respectful 432MBps on 2.8GHz processor now. For reference.
-# If executed on Xeon, current RC4_CHAR code-path is 2.7x faster than
-# RC4_INT code-path. While if executed on Opteron, it's only 25%
-# slower than the RC4_INT one [meaning that if CPU µ-arch detection
-# is not implemented, then this final RC4_CHAR code-path should be
-# preferred, as it provides better *all-round* performance].
-
-$output=shift;
-open STDOUT,"| $^X ../perlasm/x86_64-xlate.pl $output";
-
-$dat="%rdi";	    # arg1
-$len="%rsi";	    # arg2
-$inp="%rdx";	    # arg3
-$out="%rcx";	    # arg4
-
-@XX=("%r8","%r10");
-@TX=("%r9","%r11");
-$YY="%r12";
-$TY="%r13";
-
-$code=<<___;
-.text
-
-.globl	RC4
-.type	RC4,\@function,4
-.align	16
-RC4:	or	$len,$len
-	jne	.Lentry
-	ret
-.Lentry:
-	push	%r12
-	push	%r13
-
-	add	\$8,$dat
-	movl	-8($dat),$XX[0]#d
-	movl	-4($dat),$YY#d
-	cmpl	\$-1,256($dat)
-	je	.LRC4_CHAR
-	inc	$XX[0]#b
-	movl	($dat,$XX[0],4),$TX[0]#d
-	test	\$-8,$len
-	jz	.Lloop1
-	jmp	.Lloop8
-.align	16
-.Lloop8:
-___
-for ($i=0;$i<8;$i++) {
-$code.=<<___;
-	add	$TX[0]#b,$YY#b
-	mov	$XX[0],$XX[1]
-	movl	($dat,$YY,4),$TY#d
-	ror	\$8,%rax			# ror is redundant when $i=0
-	inc	$XX[1]#b
-	movl	($dat,$XX[1],4),$TX[1]#d
-	cmp	$XX[1],$YY
-	movl	$TX[0]#d,($dat,$YY,4)
-	cmove	$TX[0],$TX[1]
-	movl	$TY#d,($dat,$XX[0],4)
-	add	$TX[0]#b,$TY#b
-	movb	($dat,$TY,4),%al
-___
-push(@TX,shift(@TX)); push(@XX,shift(@XX));	# "rotate" registers
-}
-$code.=<<___;
-	ror	\$8,%rax
-	sub	\$8,$len
-
-	xor	($inp),%rax
-	add	\$8,$inp
-	mov	%rax,($out)
-	add	\$8,$out
-
-	test	\$-8,$len
-	jnz	.Lloop8
-	cmp	\$0,$len
-	jne	.Lloop1
-___
-$code.=<<___;
-.Lexit:
-	sub	\$1,$XX[0]#b
-	movl	$XX[0]#d,-8($dat)
-	movl	$YY#d,-4($dat)
-
-	pop	%r13
-	pop	%r12
-	ret
-.align	16
-.Lloop1:
-	add	$TX[0]#b,$YY#b
-	movl	($dat,$YY,4),$TY#d
-	movl	$TX[0]#d,($dat,$YY,4)
-	movl	$TY#d,($dat,$XX[0],4)
-	add	$TY#b,$TX[0]#b
-	inc	$XX[0]#b
-	movl	($dat,$TX[0],4),$TY#d
-	movl	($dat,$XX[0],4),$TX[0]#d
-	xorb	($inp),$TY#b
-	inc	$inp
-	movb	$TY#b,($out)
-	inc	$out
-	dec	$len
-	jnz	.Lloop1
-	jmp	.Lexit
-
-.align	16
-.LRC4_CHAR:
-	add	\$1,$XX[0]#b
-	movzb	($dat,$XX[0]),$TX[0]#d
-	test	\$-8,$len
-	jz	.Lcloop1
-	push	%rbx
-	jmp	.Lcloop8
-.align	16
-.Lcloop8:
-	mov	($inp),%eax
-	mov	4($inp),%ebx
-___
-# unroll 2x4-wise, because 64-bit rotates kill Intel P4...
-for ($i=0;$i<4;$i++) {
-$code.=<<___;
-	add	$TX[0]#b,$YY#b
-	lea	1($XX[0]),$XX[1]
-	movzb	($dat,$YY),$TY#d
-	movzb	$XX[1]#b,$XX[1]#d
-	movzb	($dat,$XX[1]),$TX[1]#d
-	movb	$TX[0]#b,($dat,$YY)
-	cmp	$XX[1],$YY
-	movb	$TY#b,($dat,$XX[0])
-	jne	.Lcmov$i			# Intel cmov is sloooow...
-	mov	$TX[0],$TX[1]
-.Lcmov$i:
-	add	$TX[0]#b,$TY#b
-	xor	($dat,$TY),%al
-	ror	\$8,%eax
-___
-push(@TX,shift(@TX)); push(@XX,shift(@XX));	# "rotate" registers
-}
-for ($i=4;$i<8;$i++) {
-$code.=<<___;
-	add	$TX[0]#b,$YY#b
-	lea	1($XX[0]),$XX[1]
-	movzb	($dat,$YY),$TY#d
-	movzb	$XX[1]#b,$XX[1]#d
-	movzb	($dat,$XX[1]),$TX[1]#d
-	movb	$TX[0]#b,($dat,$YY)
-	cmp	$XX[1],$YY
-	movb	$TY#b,($dat,$XX[0])
-	jne	.Lcmov$i			# Intel cmov is sloooow...
-	mov	$TX[0],$TX[1]
-.Lcmov$i:
-	add	$TX[0]#b,$TY#b
-	xor	($dat,$TY),%bl
-	ror	\$8,%ebx
-___
-push(@TX,shift(@TX)); push(@XX,shift(@XX));	# "rotate" registers
-}
-$code.=<<___;
-	lea	-8($len),$len
-	mov	%eax,($out)
-	lea	8($inp),$inp
-	mov	%ebx,4($out)
-	lea	8($out),$out
-
-	test	\$-8,$len
-	jnz	.Lcloop8
-	pop	%rbx
-	cmp	\$0,$len
-	jne	.Lcloop1
-	jmp	.Lexit
-___
-$code.=<<___;
-.align	16
-.Lcloop1:
-	add	$TX[0]#b,$YY#b
-	movzb	($dat,$YY),$TY#d
-	movb	$TX[0]#b,($dat,$YY)
-	movb	$TY#b,($dat,$XX[0])
-	add	$TX[0]#b,$TY#b
-	add	\$1,$XX[0]#b
-	movzb	($dat,$TY),$TY#d
-	movzb	($dat,$XX[0]),$TX[0]#d
-	xorb	($inp),$TY#b
-	lea	1($inp),$inp
-	movb	$TY#b,($out)
-	lea	1($out),$out
-	sub	\$1,$len
-	jnz	.Lcloop1
-	jmp	.Lexit
-.size	RC4,.-RC4
-___
-
-$code =~ s/#([bwd])/$1/gm;
-
-print $code;
-
-close STDOUT;
diff --git a/crypto/openssl/crypto/rc4/rc4.c b/crypto/openssl/crypto/rc4/rc4.c
deleted file mode 100644
index c900b260554a..000000000000
--- a/crypto/openssl/crypto/rc4/rc4.c
+++ /dev/null
@@ -1,193 +0,0 @@
-/* crypto/rc4/rc4.c */
-/* Copyright (C) 1995-1998 Eric Young (eay@cryptsoft.com)
- * All rights reserved.
- *
- * This package is an SSL implementation written
- * by Eric Young (eay@cryptsoft.com).
- * The implementation was written so as to conform with Netscapes SSL.
- * 
- * This library is free for commercial and non-commercial use as long as
- * the following conditions are aheared to.  The following conditions
- * apply to all code found in this distribution, be it the RC4, RSA,
- * lhash, DES, etc., code; not just the SSL code.  The SSL documentation
- * included with this distribution is covered by the same copyright terms
- * except that the holder is Tim Hudson (tjh@cryptsoft.com).
- * 
- * Copyright remains Eric Young's, and as such any Copyright notices in
- * the code are not to be removed.
- * If this package is used in a product, Eric Young should be given attribution
- * as the author of the parts of the library used.
- * This can be in the form of a textual message at program startup or
- * in documentation (online or textual) provided with the package.
- * 
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions
- * are met:
- * 1. Redistributions of source code must retain the copyright
- *    notice, this list of conditions and the following disclaimer.
- * 2. Redistributions in binary form must reproduce the above copyright
- *    notice, this list of conditions and the following disclaimer in the
- *    documentation and/or other materials provided with the distribution.
- * 3. All advertising materials mentioning features or use of this software
- *    must display the following acknowledgement:
- *    "This product includes cryptographic software written by
- *     Eric Young (eay@cryptsoft.com)"
- *    The word 'cryptographic' can be left out if the rouines from the library
- *    being used are not cryptographic related :-).
- * 4. If you include any Windows specific code (or a derivative thereof) from 
- *    the apps directory (application code) you must include an acknowledgement:
- *    "This product includes software written by Tim Hudson (tjh@cryptsoft.com)"
- * 
- * THIS SOFTWARE IS PROVIDED BY ERIC YOUNG ``AS IS'' AND
- * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
- * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
- * ARE DISCLAIMED.  IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE
- * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
- * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
- * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
- * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
- * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
- * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
- * SUCH DAMAGE.
- * 
- * The licence and distribution terms for any publically available version or
- * derivative of this code cannot be changed.  i.e. this code cannot simply be
- * copied and put under another distribution licence
- * [including the GNU Public Licence.]
- */
-
-#include <stdio.h>
-#include <stdlib.h>
-#include <string.h>
-#include <openssl/rc4.h>
-#include <openssl/evp.h>
-
-char *usage[]={
-"usage: rc4 args\n",
-"\n",
-" -in arg         - input file - default stdin\n",
-" -out arg        - output file - default stdout\n",
-" -key key        - password\n",
-NULL
-};
-
-int main(int argc, char *argv[])
-	{
-	FILE *in=NULL,*out=NULL;
-	char *infile=NULL,*outfile=NULL,*keystr=NULL;
-	RC4_KEY key;
-	char buf[BUFSIZ];
-	int badops=0,i;
-	char **pp;
-	unsigned char md[MD5_DIGEST_LENGTH];
-
-	argc--;
-	argv++;
-	while (argc >= 1)
-		{
-		if 	(strcmp(*argv,"-in") == 0)
-			{
-			if (--argc < 1) goto bad;
-			infile= *(++argv);
-			}
-		else if (strcmp(*argv,"-out") == 0)
-			{
-			if (--argc < 1) goto bad;
-			outfile= *(++argv);
-			}
-		else if (strcmp(*argv,"-key") == 0)
-			{
-			if (--argc < 1) goto bad;
-			keystr= *(++argv);
-			}
-		else
-			{
-			fprintf(stderr,"unknown option %s\n",*argv);
-			badops=1;
-			break;
-			}
-		argc--;
-		argv++;
-		}
-
-	if (badops)
-		{
-bad:
-		for (pp=usage; (*pp != NULL); pp++)
-			fprintf(stderr,"%s",*pp);
-		exit(1);
-		}
-
-	if (infile == NULL)
-		in=stdin;
-	else
-		{
-		in=fopen(infile,"r");
-		if (in == NULL)
-			{
-			perror("open");
-			exit(1);
-			}
-
-		}
-	if (outfile == NULL)
-		out=stdout;
-	else
-		{
-		out=fopen(outfile,"w");
-		if (out == NULL)
-			{
-			perror("open");
-			exit(1);
-			}
-		}
-		
-#ifdef OPENSSL_SYS_MSDOS
-	/* This should set the file to binary mode. */
-	{
-#include <fcntl.h>
-	setmode(fileno(in),O_BINARY);
-	setmode(fileno(out),O_BINARY);
-	}
-#endif
-
-	if (keystr == NULL)
-		{ /* get key */
-		i=EVP_read_pw_string(buf,BUFSIZ,"Enter RC4 password:",0);
-		if (i != 0)
-			{
-			OPENSSL_cleanse(buf,BUFSIZ);
-			fprintf(stderr,"bad password read\n");
-			exit(1);
-			}
-		keystr=buf;
-		}
-
-	EVP_Digest((unsigned char *)keystr,strlen(keystr),md,NULL,EVP_md5(),NULL);
-	OPENSSL_cleanse(keystr,strlen(keystr));
-	RC4_set_key(&key,MD5_DIGEST_LENGTH,md);
-	
-	for(;;)
-		{
-		i=fread(buf,1,BUFSIZ,in);
-		if (i == 0) break;
-		if (i < 0)
-			{
-			perror("read");
-			exit(1);
-			}
-		RC4(&key,(unsigned int)i,(unsigned char *)buf,
-			(unsigned char *)buf);
-		i=fwrite(buf,(unsigned int)i,1,out);
-		if (i != 1)
-			{
-			perror("write");
-			exit(1);
-			}
-		}
-	fclose(out);
-	fclose(in);
-	exit(0);
-	return(1);
-	}
-
diff --git a/crypto/openssl/crypto/rc4/rc4.h b/crypto/openssl/crypto/rc4/rc4.h
deleted file mode 100644
index 7aec04fe93a2..000000000000
--- a/crypto/openssl/crypto/rc4/rc4.h
+++ /dev/null
@@ -1,87 +0,0 @@
-/* crypto/rc4/rc4.h */
-/* Copyright (C) 1995-1997 Eric Young (eay@cryptsoft.com)
- * All rights reserved.
- *
- * This package is an SSL implementation written
- * by Eric Young (eay@cryptsoft.com).
- * The implementation was written so as to conform with Netscapes SSL.
- * 
- * This library is free for commercial and non-commercial use as long as
- * the following conditions are aheared to.  The following conditions
- * apply to all code found in this distribution, be it the RC4, RSA,
- * lhash, DES, etc., code; not just the SSL code.  The SSL documentation
- * included with this distribution is covered by the same copyright terms
- * except that the holder is Tim Hudson (tjh@cryptsoft.com).
- * 
- * Copyright remains Eric Young's, and as such any Copyright notices in
- * the code are not to be removed.
- * If this package is used in a product, Eric Young should be given attribution
- * as the author of the parts of the library used.
- * This can be in the form of a textual message at program startup or
- * in documentation (online or textual) provided with the package.
- * 
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions
- * are met:
- * 1. Redistributions of source code must retain the copyright
- *    notice, this list of conditions and the following disclaimer.
- * 2. Redistributions in binary form must reproduce the above copyright
- *    notice, this list of conditions and the following disclaimer in the
- *    documentation and/or other materials provided with the distribution.
- * 3. All advertising materials mentioning features or use of this software
- *    must display the following acknowledgement:
- *    "This product includes cryptographic software written by
- *     Eric Young (eay@cryptsoft.com)"
- *    The word 'cryptographic' can be left out if the rouines from the library
- *    being used are not cryptographic related :-).
- * 4. If you include any Windows specific code (or a derivative thereof) from 
- *    the apps directory (application code) you must include an acknowledgement:
- *    "This product includes software written by Tim Hudson (tjh@cryptsoft.com)"
- * 
- * THIS SOFTWARE IS PROVIDED BY ERIC YOUNG ``AS IS'' AND
- * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
- * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
- * ARE DISCLAIMED.  IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE
- * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
- * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
- * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
- * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
- * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
- * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
- * SUCH DAMAGE.
- * 
- * The licence and distribution terms for any publically available version or
- * derivative of this code cannot be changed.  i.e. this code cannot simply be
- * copied and put under another distribution licence
- * [including the GNU Public Licence.]
- */
-
-#ifndef HEADER_RC4_H
-#define HEADER_RC4_H
-
-#include <openssl/opensslconf.h> /* OPENSSL_NO_RC4, RC4_INT */
-#ifdef OPENSSL_NO_RC4
-#error RC4 is disabled.
-#endif
-
-#ifdef  __cplusplus
-extern "C" {
-#endif
-
-typedef struct rc4_key_st
-	{
-	RC4_INT x,y;
-	RC4_INT data[256];
-	} RC4_KEY;
-
- 
-const char *RC4_options(void);
-void RC4_set_key(RC4_KEY *key, int len, const unsigned char *data);
-void RC4(RC4_KEY *key, unsigned long len, const unsigned char *indata,
-		unsigned char *outdata);
-
-#ifdef  __cplusplus
-}
-#endif
-
-#endif
diff --git a/crypto/openssl/crypto/rc4/rc4_enc.c b/crypto/openssl/crypto/rc4/rc4_enc.c
deleted file mode 100644
index 0660ea60a25e..000000000000
--- a/crypto/openssl/crypto/rc4/rc4_enc.c
+++ /dev/null
@@ -1,315 +0,0 @@
-/* crypto/rc4/rc4_enc.c */
-/* Copyright (C) 1995-1998 Eric Young (eay@cryptsoft.com)
- * All rights reserved.
- *
- * This package is an SSL implementation written
- * by Eric Young (eay@cryptsoft.com).
- * The implementation was written so as to conform with Netscapes SSL.
- * 
- * This library is free for commercial and non-commercial use as long as
- * the following conditions are aheared to.  The following conditions
- * apply to all code found in this distribution, be it the RC4, RSA,
- * lhash, DES, etc., code; not just the SSL code.  The SSL documentation
- * included with this distribution is covered by the same copyright terms
- * except that the holder is Tim Hudson (tjh@cryptsoft.com).
- * 
- * Copyright remains Eric Young's, and as such any Copyright notices in
- * the code are not to be removed.
- * If this package is used in a product, Eric Young should be given attribution
- * as the author of the parts of the library used.
- * This can be in the form of a textual message at program startup or
- * in documentation (online or textual) provided with the package.
- * 
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions
- * are met:
- * 1. Redistributions of source code must retain the copyright
- *    notice, this list of conditions and the following disclaimer.
- * 2. Redistributions in binary form must reproduce the above copyright
- *    notice, this list of conditions and the following disclaimer in the
- *    documentation and/or other materials provided with the distribution.
- * 3. All advertising materials mentioning features or use of this software
- *    must display the following acknowledgement:
- *    "This product includes cryptographic software written by
- *     Eric Young (eay@cryptsoft.com)"
- *    The word 'cryptographic' can be left out if the rouines from the library
- *    being used are not cryptographic related :-).
- * 4. If you include any Windows specific code (or a derivative thereof) from 
- *    the apps directory (application code) you must include an acknowledgement:
- *    "This product includes software written by Tim Hudson (tjh@cryptsoft.com)"
- * 
- * THIS SOFTWARE IS PROVIDED BY ERIC YOUNG ``AS IS'' AND
- * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
- * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
- * ARE DISCLAIMED.  IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE
- * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
- * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
- * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
- * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
- * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
- * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
- * SUCH DAMAGE.
- * 
- * The licence and distribution terms for any publically available version or
- * derivative of this code cannot be changed.  i.e. this code cannot simply be
- * copied and put under another distribution licence
- * [including the GNU Public Licence.]
- */
-
-#include <openssl/rc4.h>
-#include "rc4_locl.h"
-
-/* RC4 as implemented from a posting from
- * Newsgroups: sci.crypt
- * From: sterndark@netcom.com (David Sterndark)
- * Subject: RC4 Algorithm revealed.
- * Message-ID: <sternCvKL4B.Hyy@netcom.com>
- * Date: Wed, 14 Sep 1994 06:35:31 GMT
- */
-
-void RC4(RC4_KEY *key, unsigned long len, const unsigned char *indata,
-	     unsigned char *outdata)
-	{
-        register RC4_INT *d;
-        register RC4_INT x,y,tx,ty;
-	int i;
-        
-        x=key->x;     
-        y=key->y;     
-        d=key->data; 
-
-#if defined(RC4_CHUNK)
-	/*
-	 * The original reason for implementing this(*) was the fact that
-	 * pre-21164a Alpha CPUs don't have byte load/store instructions
-	 * and e.g. a byte store has to be done with 64-bit load, shift,
-	 * and, or and finally 64-bit store. Peaking data and operating
-	 * at natural word size made it possible to reduce amount of
-	 * instructions as well as to perform early read-ahead without
-	 * suffering from RAW (read-after-write) hazard. This resulted
-	 * in ~40%(**) performance improvement on 21064 box with gcc.
-	 * But it's not only Alpha users who win here:-) Thanks to the
-	 * early-n-wide read-ahead this implementation also exhibits
-	 * >40% speed-up on SPARC and 20-30% on 64-bit MIPS (depending
-	 * on sizeof(RC4_INT)).
-	 *
-	 * (*)	"this" means code which recognizes the case when input
-	 *	and output pointers appear to be aligned at natural CPU
-	 *	word boundary
-	 * (**)	i.e. according to 'apps/openssl speed rc4' benchmark,
-	 *	crypto/rc4/rc4speed.c exhibits almost 70% speed-up...
-	 *
-	 * Cavets.
-	 *
-	 * - RC4_CHUNK="unsigned long long" should be a #1 choice for
-	 *   UltraSPARC. Unfortunately gcc generates very slow code
-	 *   (2.5-3 times slower than one generated by Sun's WorkShop
-	 *   C) and therefore gcc (at least 2.95 and earlier) should
-	 *   always be told that RC4_CHUNK="unsigned long".
-	 *
-	 *					<appro@fy.chalmers.se>
-	 */
-
-# define RC4_STEP	( \
-			x=(x+1) &0xff,	\
-			tx=d[x],	\
-			y=(tx+y)&0xff,	\
-			ty=d[y],	\
-			d[y]=tx,	\
-			d[x]=ty,	\
-			(RC4_CHUNK)d[(tx+ty)&0xff]\
-			)
-
-	if ( ( ((unsigned long)indata  & (sizeof(RC4_CHUNK)-1)) | 
-	       ((unsigned long)outdata & (sizeof(RC4_CHUNK)-1)) ) == 0 )
-		{
-		RC4_CHUNK ichunk,otp;
-		const union { long one; char little; } is_endian = {1};
-
-		/*
-		 * I reckon we can afford to implement both endian
-		 * cases and to decide which way to take at run-time
-		 * because the machine code appears to be very compact
-		 * and redundant 1-2KB is perfectly tolerable (i.e.
-		 * in case the compiler fails to eliminate it:-). By
-		 * suggestion from Terrel Larson <terr@terralogic.net>
-		 * who also stands for the is_endian union:-)
-		 *
-		 * Special notes.
-		 *
-		 * - is_endian is declared automatic as doing otherwise
-		 *   (declaring static) prevents gcc from eliminating
-		 *   the redundant code;
-		 * - compilers (those I've tried) don't seem to have
-		 *   problems eliminating either the operators guarded
-		 *   by "if (sizeof(RC4_CHUNK)==8)" or the condition
-		 *   expressions themselves so I've got 'em to replace
-		 *   corresponding #ifdefs from the previous version;
-		 * - I chose to let the redundant switch cases when
-		 *   sizeof(RC4_CHUNK)!=8 be (were also #ifdefed
-		 *   before);
-		 * - in case you wonder "&(sizeof(RC4_CHUNK)*8-1)" in
-		 *   [LB]ESHFT guards against "shift is out of range"
-		 *   warnings when sizeof(RC4_CHUNK)!=8 
-		 *
-		 *			<appro@fy.chalmers.se>
-		 */
-		if (!is_endian.little)
-			{	/* BIG-ENDIAN CASE */
-# define BESHFT(c)	(((sizeof(RC4_CHUNK)-(c)-1)*8)&(sizeof(RC4_CHUNK)*8-1))
-			for (;len&~(sizeof(RC4_CHUNK)-1);len-=sizeof(RC4_CHUNK))
-				{
-				ichunk  = *(RC4_CHUNK *)indata;
-				otp  = RC4_STEP<<BESHFT(0);
-				otp |= RC4_STEP<<BESHFT(1);
-				otp |= RC4_STEP<<BESHFT(2);
-				otp |= RC4_STEP<<BESHFT(3);
-				if (sizeof(RC4_CHUNK)==8)
-					{
-					otp |= RC4_STEP<<BESHFT(4);
-					otp |= RC4_STEP<<BESHFT(5);
-					otp |= RC4_STEP<<BESHFT(6);
-					otp |= RC4_STEP<<BESHFT(7);
-					}
-				*(RC4_CHUNK *)outdata = otp^ichunk;
-				indata  += sizeof(RC4_CHUNK);
-				outdata += sizeof(RC4_CHUNK);
-				}
-			if (len)
-				{
-				RC4_CHUNK mask=(RC4_CHUNK)-1, ochunk;
-
-				ichunk = *(RC4_CHUNK *)indata;
-				ochunk = *(RC4_CHUNK *)outdata;
-				otp = 0;
-				i = BESHFT(0);
-				mask <<= (sizeof(RC4_CHUNK)-len)<<3;
-				switch (len&(sizeof(RC4_CHUNK)-1))
-					{
-					case 7:	otp  = RC4_STEP<<i, i-=8;
-					case 6:	otp |= RC4_STEP<<i, i-=8;
-					case 5:	otp |= RC4_STEP<<i, i-=8;
-					case 4:	otp |= RC4_STEP<<i, i-=8;
-					case 3:	otp |= RC4_STEP<<i, i-=8;
-					case 2:	otp |= RC4_STEP<<i, i-=8;
-					case 1:	otp |= RC4_STEP<<i, i-=8;
-					case 0: ; /*
-						   * it's never the case,
-						   * but it has to be here
-						   * for ultrix?
-						   */
-					}
-				ochunk &= ~mask;
-				ochunk |= (otp^ichunk) & mask;
-				*(RC4_CHUNK *)outdata = ochunk;
-				}
-			key->x=x;     
-			key->y=y;
-			return;
-			}
-		else
-			{	/* LITTLE-ENDIAN CASE */
-# define LESHFT(c)	(((c)*8)&(sizeof(RC4_CHUNK)*8-1))
-			for (;len&~(sizeof(RC4_CHUNK)-1);len-=sizeof(RC4_CHUNK))
-				{
-				ichunk  = *(RC4_CHUNK *)indata;
-				otp  = RC4_STEP;
-				otp |= RC4_STEP<<8;
-				otp |= RC4_STEP<<16;
-				otp |= RC4_STEP<<24;
-				if (sizeof(RC4_CHUNK)==8)
-					{
-					otp |= RC4_STEP<<LESHFT(4);
-					otp |= RC4_STEP<<LESHFT(5);
-					otp |= RC4_STEP<<LESHFT(6);
-					otp |= RC4_STEP<<LESHFT(7);
-					}
-				*(RC4_CHUNK *)outdata = otp^ichunk;
-				indata  += sizeof(RC4_CHUNK);
-				outdata += sizeof(RC4_CHUNK);
-				}
-			if (len)
-				{
-				RC4_CHUNK mask=(RC4_CHUNK)-1, ochunk;
-
-				ichunk = *(RC4_CHUNK *)indata;
-				ochunk = *(RC4_CHUNK *)outdata;
-				otp = 0;
-				i   = 0;
-				mask >>= (sizeof(RC4_CHUNK)-len)<<3;
-				switch (len&(sizeof(RC4_CHUNK)-1))
-					{
-					case 7:	otp  = RC4_STEP,    i+=8;
-					case 6:	otp |= RC4_STEP<<i, i+=8;
-					case 5:	otp |= RC4_STEP<<i, i+=8;
-					case 4:	otp |= RC4_STEP<<i, i+=8;
-					case 3:	otp |= RC4_STEP<<i, i+=8;
-					case 2:	otp |= RC4_STEP<<i, i+=8;
-					case 1:	otp |= RC4_STEP<<i, i+=8;
-					case 0: ; /*
-						   * it's never the case,
-						   * but it has to be here
-						   * for ultrix?
-						   */
-					}
-				ochunk &= ~mask;
-				ochunk |= (otp^ichunk) & mask;
-				*(RC4_CHUNK *)outdata = ochunk;
-				}
-			key->x=x;     
-			key->y=y;
-			return;
-			}
-		}
-#endif
-#define LOOP(in,out) \
-		x=((x+1)&0xff); \
-		tx=d[x]; \
-		y=(tx+y)&0xff; \
-		d[x]=ty=d[y]; \
-		d[y]=tx; \
-		(out) = d[(tx+ty)&0xff]^ (in);
-
-#ifndef RC4_INDEX
-#define RC4_LOOP(a,b,i)	LOOP(*((a)++),*((b)++))
-#else
-#define RC4_LOOP(a,b,i)	LOOP(a[i],b[i])
-#endif
-
-	i=(int)(len>>3L);
-	if (i)
-		{
-		for (;;)
-			{
-			RC4_LOOP(indata,outdata,0);
-			RC4_LOOP(indata,outdata,1);
-			RC4_LOOP(indata,outdata,2);
-			RC4_LOOP(indata,outdata,3);
-			RC4_LOOP(indata,outdata,4);
-			RC4_LOOP(indata,outdata,5);
-			RC4_LOOP(indata,outdata,6);
-			RC4_LOOP(indata,outdata,7);
-#ifdef RC4_INDEX
-			indata+=8;
-			outdata+=8;
-#endif
-			if (--i == 0) break;
-			}
-		}
-	i=(int)len&0x07;
-	if (i)
-		{
-		for (;;)
-			{
-			RC4_LOOP(indata,outdata,0); if (--i == 0) break;
-			RC4_LOOP(indata,outdata,1); if (--i == 0) break;
-			RC4_LOOP(indata,outdata,2); if (--i == 0) break;
-			RC4_LOOP(indata,outdata,3); if (--i == 0) break;
-			RC4_LOOP(indata,outdata,4); if (--i == 0) break;
-			RC4_LOOP(indata,outdata,5); if (--i == 0) break;
-			RC4_LOOP(indata,outdata,6); if (--i == 0) break;
-			}
-		}               
-	key->x=x;     
-	key->y=y;
-	}
diff --git a/crypto/openssl/crypto/rc4/rc4_locl.h b/crypto/openssl/crypto/rc4/rc4_locl.h
deleted file mode 100644
index c712e1632ea5..000000000000
--- a/crypto/openssl/crypto/rc4/rc4_locl.h
+++ /dev/null
@@ -1,5 +0,0 @@
-#ifndef HEADER_RC4_LOCL_H
-#define HEADER_RC4_LOCL_H
-#include <openssl/opensslconf.h>
-#include <cryptlib.h>
-#endif
diff --git a/crypto/openssl/crypto/rc4/rc4_skey.c b/crypto/openssl/crypto/rc4/rc4_skey.c
deleted file mode 100644
index b22c40b0bd06..000000000000
--- a/crypto/openssl/crypto/rc4/rc4_skey.c
+++ /dev/null
@@ -1,150 +0,0 @@
-/* crypto/rc4/rc4_skey.c */
-/* Copyright (C) 1995-1998 Eric Young (eay@cryptsoft.com)
- * All rights reserved.
- *
- * This package is an SSL implementation written
- * by Eric Young (eay@cryptsoft.com).
- * The implementation was written so as to conform with Netscapes SSL.
- * 
- * This library is free for commercial and non-commercial use as long as
- * the following conditions are aheared to.  The following conditions
- * apply to all code found in this distribution, be it the RC4, RSA,
- * lhash, DES, etc., code; not just the SSL code.  The SSL documentation
- * included with this distribution is covered by the same copyright terms
- * except that the holder is Tim Hudson (tjh@cryptsoft.com).
- * 
- * Copyright remains Eric Young's, and as such any Copyright notices in
- * the code are not to be removed.
- * If this package is used in a product, Eric Young should be given attribution
- * as the author of the parts of the library used.
- * This can be in the form of a textual message at program startup or
- * in documentation (online or textual) provided with the package.
- * 
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions
- * are met:
- * 1. Redistributions of source code must retain the copyright
- *    notice, this list of conditions and the following disclaimer.
- * 2. Redistributions in binary form must reproduce the above copyright
- *    notice, this list of conditions and the following disclaimer in the
- *    documentation and/or other materials provided with the distribution.
- * 3. All advertising materials mentioning features or use of this software
- *    must display the following acknowledgement:
- *    "This product includes cryptographic software written by
- *     Eric Young (eay@cryptsoft.com)"
- *    The word 'cryptographic' can be left out if the rouines from the library
- *    being used are not cryptographic related :-).
- * 4. If you include any Windows specific code (or a derivative thereof) from 
- *    the apps directory (application code) you must include an acknowledgement:
- *    "This product includes software written by Tim Hudson (tjh@cryptsoft.com)"
- * 
- * THIS SOFTWARE IS PROVIDED BY ERIC YOUNG ``AS IS'' AND
- * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
- * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
- * ARE DISCLAIMED.  IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE
- * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
- * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
- * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
- * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
- * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
- * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
- * SUCH DAMAGE.
- * 
- * The licence and distribution terms for any publically available version or
- * derivative of this code cannot be changed.  i.e. this code cannot simply be
- * copied and put under another distribution licence
- * [including the GNU Public Licence.]
- */
-
-#include <openssl/rc4.h>
-#include "rc4_locl.h"
-#include <openssl/opensslv.h>
-
-const char RC4_version[]="RC4" OPENSSL_VERSION_PTEXT;
-
-const char *RC4_options(void)
-	{
-#ifdef RC4_INDEX
-	if (sizeof(RC4_INT) == 1)
-		return("rc4(idx,char)");
-	else
-		return("rc4(idx,int)");
-#else
-	if (sizeof(RC4_INT) == 1)
-		return("rc4(ptr,char)");
-	else
-		return("rc4(ptr,int)");
-#endif
-	}
-
-/* RC4 as implemented from a posting from
- * Newsgroups: sci.crypt
- * From: sterndark@netcom.com (David Sterndark)
- * Subject: RC4 Algorithm revealed.
- * Message-ID: <sternCvKL4B.Hyy@netcom.com>
- * Date: Wed, 14 Sep 1994 06:35:31 GMT
- */
-
-void RC4_set_key(RC4_KEY *key, int len, const unsigned char *data)
-	{
-        register RC4_INT tmp;
-        register int id1,id2;
-        register RC4_INT *d;
-        unsigned int i;
-        
-        d= &(key->data[0]);
-        key->x = 0;     
-        key->y = 0;     
-        id1=id2=0;     
-
-#define SK_LOOP(d,n) { \
-		tmp=d[(n)]; \
-		id2 = (data[id1] + tmp + id2) & 0xff; \
-		if (++id1 == len) id1=0; \
-		d[(n)]=d[id2]; \
-		d[id2]=tmp; }
-
-#if defined(OPENSSL_CPUID_OBJ) && !defined(OPENSSL_NO_ASM)
-# if	defined(__i386)   || defined(__i386__)   || defined(_M_IX86) || \
-	defined(__INTEL__) || \
-	defined(__x86_64) || defined(__x86_64__) || defined(_M_AMD64)
-	if (sizeof(RC4_INT) > 1) {
-		/*
-		 * Unlike all other x86 [and x86_64] implementations,
-		 * Intel P4 core [including EM64T] was found to perform
-		 * poorly with wider RC4_INT. Performance improvement
-		 * for IA-32 hand-coded assembler turned out to be 2.8x
-		 * if re-coded for RC4_CHAR! It's however inappropriate
-		 * to just switch to RC4_CHAR for x86[_64], as non-P4
-		 * implementations suffer from significant performance
-		 * losses then, e.g. PIII exhibits >2x deterioration,
-		 * and so does Opteron. In order to assure optimal
-		 * all-round performance, let us [try to] detect P4 at
-		 * run-time by checking upon HTT bit in CPU capability
-		 * vector and set up compressed key schedule, which is
-		 * recognized by correspondingly updated assembler
-		 * module...
-		 *				<appro@fy.chalmers.se>
-		 */
-		if (OPENSSL_ia32cap_P & (1<<28)) {
-			unsigned char *cp=(unsigned char *)d;
-
-			for (i=0;i<256;i++) cp[i]=i;
-			for (i=0;i<256;i++) SK_LOOP(cp,i);
-			/* mark schedule as compressed! */
-			d[256/sizeof(RC4_INT)]=-1;
-			return;
-		}
-	}
-# endif
-#endif
-	for (i=0; i < 256; i++) d[i]=i;
-	for (i=0; i < 256; i+=4)
-		{
-		SK_LOOP(d,i+0);
-		SK_LOOP(d,i+1);
-		SK_LOOP(d,i+2);
-		SK_LOOP(d,i+3);
-		}
-	}
-    
diff --git a/crypto/openssl/crypto/rc4/rc4s.cpp b/crypto/openssl/crypto/rc4/rc4s.cpp
deleted file mode 100644
index 3814fde9972f..000000000000
--- a/crypto/openssl/crypto/rc4/rc4s.cpp
+++ /dev/null
@@ -1,73 +0,0 @@
-//
-// gettsc.inl
-//
-// gives access to the Pentium's (secret) cycle counter
-//
-// This software was written by Leonard Janke (janke@unixg.ubc.ca)
-// in 1996-7 and is entered, by him, into the public domain.
-
-#if defined(__WATCOMC__)
-void GetTSC(unsigned long&);
-#pragma aux GetTSC = 0x0f 0x31 "mov [edi], eax" parm [edi] modify [edx eax];
-#elif defined(__GNUC__)
-inline
-void GetTSC(unsigned long& tsc)
-{
-  asm volatile(".byte 15, 49\n\t"
-	       : "=eax" (tsc)
-	       :
-	       : "%edx", "%eax");
-}
-#elif defined(_MSC_VER)
-inline
-void GetTSC(unsigned long& tsc)
-{
-  unsigned long a;
-  __asm _emit 0fh
-  __asm _emit 31h
-  __asm mov a, eax;
-  tsc=a;
-}
-#endif      
-
-#include <stdio.h>
-#include <stdlib.h>
-#include <openssl/rc4.h>
-
-void main(int argc,char *argv[])
-	{
-	unsigned char buffer[1024];
-	RC4_KEY ctx;
-	unsigned long s1,s2,e1,e2;
-	unsigned char k[16];
-	unsigned long data[2];
-	unsigned char iv[8];
-	int i,num=64,numm;
-	int j=0;
-
-	if (argc >= 2)
-		num=atoi(argv[1]);
-
-	if (num == 0) num=256;
-	if (num > 1024-16) num=1024-16;
-	numm=num+8;
-
-	for (j=0; j<6; j++)
-		{
-		for (i=0; i<10; i++) /**/
-			{
-			RC4(&ctx,numm,buffer,buffer);
-			GetTSC(s1);
-			RC4(&ctx,numm,buffer,buffer);
-			GetTSC(e1);
-			GetTSC(s2);
-			RC4(&ctx,num,buffer,buffer);
-			GetTSC(e2);
-			RC4(&ctx,num,buffer,buffer);
-			}
-
-		printf("RC4 (%d bytes) %d %d (%d) - 8 bytes\n",num,
-			e1-s1,e2-s2,(e1-s1)-(e2-s2));
-		}
-	}
-
diff --git a/crypto/openssl/crypto/rc4/rc4speed.c b/crypto/openssl/crypto/rc4/rc4speed.c
deleted file mode 100644
index 0ebd38123d04..000000000000
--- a/crypto/openssl/crypto/rc4/rc4speed.c
+++ /dev/null
@@ -1,253 +0,0 @@
-/* crypto/rc4/rc4speed.c */
-/* Copyright (C) 1995-1998 Eric Young (eay@cryptsoft.com)
- * All rights reserved.
- *
- * This package is an SSL implementation written
- * by Eric Young (eay@cryptsoft.com).
- * The implementation was written so as to conform with Netscapes SSL.
- * 
- * This library is free for commercial and non-commercial use as long as
- * the following conditions are aheared to.  The following conditions
- * apply to all code found in this distribution, be it the RC4, RSA,
- * lhash, DES, etc., code; not just the SSL code.  The SSL documentation
- * included with this distribution is covered by the same copyright terms
- * except that the holder is Tim Hudson (tjh@cryptsoft.com).
- * 
- * Copyright remains Eric Young's, and as such any Copyright notices in
- * the code are not to be removed.
- * If this package is used in a product, Eric Young should be given attribution
- * as the author of the parts of the library used.
- * This can be in the form of a textual message at program startup or
- * in documentation (online or textual) provided with the package.
- * 
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions
- * are met:
- * 1. Redistributions of source code must retain the copyright
- *    notice, this list of conditions and the following disclaimer.
- * 2. Redistributions in binary form must reproduce the above copyright
- *    notice, this list of conditions and the following disclaimer in the
- *    documentation and/or other materials provided with the distribution.
- * 3. All advertising materials mentioning features or use of this software
- *    must display the following acknowledgement:
- *    "This product includes cryptographic software written by
- *     Eric Young (eay@cryptsoft.com)"
- *    The word 'cryptographic' can be left out if the rouines from the library
- *    being used are not cryptographic related :-).
- * 4. If you include any Windows specific code (or a derivative thereof) from 
- *    the apps directory (application code) you must include an acknowledgement:
- *    "This product includes software written by Tim Hudson (tjh@cryptsoft.com)"
- * 
- * THIS SOFTWARE IS PROVIDED BY ERIC YOUNG ``AS IS'' AND
- * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
- * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
- * ARE DISCLAIMED.  IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE
- * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
- * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
- * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
- * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
- * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
- * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
- * SUCH DAMAGE.
- * 
- * The licence and distribution terms for any publically available version or
- * derivative of this code cannot be changed.  i.e. this code cannot simply be
- * copied and put under another distribution licence
- * [including the GNU Public Licence.]
- */
-
-/* 11-Sep-92 Andrew Daviel   Support for Silicon Graphics IRIX added */
-/* 06-Apr-92 Luke Brennan    Support for VMS and add extra signal calls */
-
-#if !defined(OPENSSL_SYS_MSDOS) && (!defined(OPENSSL_SYS_VMS) || defined(__DECC)) && !defined(OPENSSL_SYS_MACOSX)
-#define TIMES
-#endif
-
-#include <stdio.h>
-
-#include <openssl/e_os2.h>
-#include OPENSSL_UNISTD_IO
-OPENSSL_DECLARE_EXIT
-
-#ifndef OPENSSL_SYS_NETWARE
-#include <signal.h>
-#endif
-
-#ifndef _IRIX
-#include <time.h>
-#endif
-#ifdef TIMES
-#include <sys/types.h>
-#include <sys/times.h>
-#endif
-
-/* Depending on the VMS version, the tms structure is perhaps defined.
-   The __TMS macro will show if it was.  If it wasn't defined, we should
-   undefine TIMES, since that tells the rest of the program how things
-   should be handled.				-- Richard Levitte */
-#if defined(OPENSSL_SYS_VMS_DECC) && !defined(__TMS)
-#undef TIMES
-#endif
-
-#ifndef TIMES
-#include <sys/timeb.h>
-#endif
-
-#if defined(sun) || defined(__ultrix)
-#define _POSIX_SOURCE
-#include <limits.h>
-#include <sys/param.h>
-#endif
-
-#include <openssl/rc4.h>
-
-/* The following if from times(3) man page.  It may need to be changed */
-#ifndef HZ
-#ifndef CLK_TCK
-#define HZ	100.0
-#else /* CLK_TCK */
-#define HZ ((double)CLK_TCK)
-#endif
-#endif
-
-#define BUFSIZE	((long)1024)
-long run=0;
-
-double Time_F(int s);
-#ifdef SIGALRM
-#if defined(__STDC__) || defined(sgi) || defined(_AIX)
-#define SIGRETTYPE void
-#else
-#define SIGRETTYPE int
-#endif
-
-SIGRETTYPE sig_done(int sig);
-SIGRETTYPE sig_done(int sig)
-	{
-	signal(SIGALRM,sig_done);
-	run=0;
-#ifdef LINT
-	sig=sig;
-#endif
-	}
-#endif
-
-#define START	0
-#define STOP	1
-
-double Time_F(int s)
-	{
-	double ret;
-#ifdef TIMES
-	static struct tms tstart,tend;
-
-	if (s == START)
-		{
-		times(&tstart);
-		return(0);
-		}
-	else
-		{
-		times(&tend);
-		ret=((double)(tend.tms_utime-tstart.tms_utime))/HZ;
-		return((ret == 0.0)?1e-6:ret);
-		}
-#else /* !times() */
-	static struct timeb tstart,tend;
-	long i;
-
-	if (s == START)
-		{
-		ftime(&tstart);
-		return(0);
-		}
-	else
-		{
-		ftime(&tend);
-		i=(long)tend.millitm-(long)tstart.millitm;
-		ret=((double)(tend.time-tstart.time))+((double)i)/1e3;
-		return((ret == 0.0)?1e-6:ret);
-		}
-#endif
-	}
-
-int main(int argc, char **argv)
-	{
-	long count;
-	static unsigned char buf[BUFSIZE];
-	static unsigned char key[] ={
-			0x12,0x34,0x56,0x78,0x9a,0xbc,0xde,0xf0,
-			0xfe,0xdc,0xba,0x98,0x76,0x54,0x32,0x10,
-			};
-	RC4_KEY sch;
-	double a,b,c,d;
-#ifndef SIGALRM
-	long ca,cb,cc;
-#endif
-
-#ifndef TIMES
-	printf("To get the most accurate results, try to run this\n");
-	printf("program when this computer is idle.\n");
-#endif
-
-#ifndef SIGALRM
-	printf("First we calculate the approximate speed ...\n");
-	RC4_set_key(&sch,16,key);
-	count=10;
-	do	{
-		long i;
-		unsigned long data[2];
-
-		count*=2;
-		Time_F(START);
-		for (i=count; i; i--)
-			RC4(&sch,8,buf,buf);
-		d=Time_F(STOP);
-		} while (d < 3.0);
-	ca=count/512;
-	cc=count*8/BUFSIZE+1;
-	printf("Doing RC4_set_key %ld times\n",ca);
-#define COND(d)	(count != (d))
-#define COUNT(d) (d)
-#else
-#define COND(c)	(run)
-#define COUNT(d) (count)
-	signal(SIGALRM,sig_done);
-	printf("Doing RC4_set_key for 10 seconds\n");
-	alarm(10);
-#endif
-
-	Time_F(START);
-	for (count=0,run=1; COND(ca); count+=4)
-		{
-		RC4_set_key(&sch,16,key);
-		RC4_set_key(&sch,16,key);
-		RC4_set_key(&sch,16,key);
-		RC4_set_key(&sch,16,key);
-		}
-	d=Time_F(STOP);
-	printf("%ld RC4_set_key's in %.2f seconds\n",count,d);
-	a=((double)COUNT(ca))/d;
-
-#ifdef SIGALRM
-	printf("Doing RC4 on %ld byte blocks for 10 seconds\n",BUFSIZE);
-	alarm(10);
-#else
-	printf("Doing RC4 %ld times on %ld byte blocks\n",cc,BUFSIZE);
-#endif
-	Time_F(START);
-	for (count=0,run=1; COND(cc); count++)
-		RC4(&sch,BUFSIZE,buf,buf);
-	d=Time_F(STOP);
-	printf("%ld RC4's of %ld byte blocks in %.2f second\n",
-		count,BUFSIZE,d);
-	c=((double)COUNT(cc)*BUFSIZE)/d;
-
-	printf("RC4 set_key per sec = %12.2f (%9.3fuS)\n",a,1.0e6/a);
-	printf("RC4   bytes per sec = %12.2f (%9.3fuS)\n",c,8.0e6/c);
-	exit(0);
-#if defined(LINT) || defined(OPENSSL_SYS_MSDOS)
-	return(0);
-#endif
-	}
-
diff --git a/crypto/openssl/crypto/rc4/rc4test.c b/crypto/openssl/crypto/rc4/rc4test.c
deleted file mode 100644
index 54b597fa266e..000000000000
--- a/crypto/openssl/crypto/rc4/rc4test.c
+++ /dev/null
@@ -1,236 +0,0 @@
-/* crypto/rc4/rc4test.c */
-/* Copyright (C) 1995-1998 Eric Young (eay@cryptsoft.com)
- * All rights reserved.
- *
- * This package is an SSL implementation written
- * by Eric Young (eay@cryptsoft.com).
- * The implementation was written so as to conform with Netscapes SSL.
- * 
- * This library is free for commercial and non-commercial use as long as
- * the following conditions are aheared to.  The following conditions
- * apply to all code found in this distribution, be it the RC4, RSA,
- * lhash, DES, etc., code; not just the SSL code.  The SSL documentation
- * included with this distribution is covered by the same copyright terms
- * except that the holder is Tim Hudson (tjh@cryptsoft.com).
- * 
- * Copyright remains Eric Young's, and as such any Copyright notices in
- * the code are not to be removed.
- * If this package is used in a product, Eric Young should be given attribution
- * as the author of the parts of the library used.
- * This can be in the form of a textual message at program startup or
- * in documentation (online or textual) provided with the package.
- * 
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions
- * are met:
- * 1. Redistributions of source code must retain the copyright
- *    notice, this list of conditions and the following disclaimer.
- * 2. Redistributions in binary form must reproduce the above copyright
- *    notice, this list of conditions and the following disclaimer in the
- *    documentation and/or other materials provided with the distribution.
- * 3. All advertising materials mentioning features or use of this software
- *    must display the following acknowledgement:
- *    "This product includes cryptographic software written by
- *     Eric Young (eay@cryptsoft.com)"
- *    The word 'cryptographic' can be left out if the rouines from the library
- *    being used are not cryptographic related :-).
- * 4. If you include any Windows specific code (or a derivative thereof) from 
- *    the apps directory (application code) you must include an acknowledgement:
- *    "This product includes software written by Tim Hudson (tjh@cryptsoft.com)"
- * 
- * THIS SOFTWARE IS PROVIDED BY ERIC YOUNG ``AS IS'' AND
- * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
- * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
- * ARE DISCLAIMED.  IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE
- * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
- * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
- * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
- * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
- * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
- * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
- * SUCH DAMAGE.
- * 
- * The licence and distribution terms for any publically available version or
- * derivative of this code cannot be changed.  i.e. this code cannot simply be
- * copied and put under another distribution licence
- * [including the GNU Public Licence.]
- */
-
-#include <stdio.h>
-#include <stdlib.h>
-#include <string.h>
-
-#include "../e_os.h"
-
-#ifdef OPENSSL_NO_RC4
-int main(int argc, char *argv[])
-{
-    printf("No RC4 support\n");
-    return(0);
-}
-#else
-#include <openssl/rc4.h>
-#include <openssl/sha.h>
-
-static unsigned char keys[7][30]={
-	{8,0x01,0x23,0x45,0x67,0x89,0xab,0xcd,0xef},
-	{8,0x01,0x23,0x45,0x67,0x89,0xab,0xcd,0xef},
-	{8,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00},
-	{4,0xef,0x01,0x23,0x45},
-	{8,0x01,0x23,0x45,0x67,0x89,0xab,0xcd,0xef},
-	{4,0xef,0x01,0x23,0x45},
-	};
-
-static unsigned char data_len[7]={8,8,8,20,28,10};
-static unsigned char data[7][30]={
-	{0x01,0x23,0x45,0x67,0x89,0xab,0xcd,0xef,0xff},
-	{0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0xff},
-	{0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0xff},
-	{0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
-	   0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
-	   0x00,0x00,0x00,0x00,0xff},
-	{0x12,0x34,0x56,0x78,0x9A,0xBC,0xDE,0xF0,
-	   0x12,0x34,0x56,0x78,0x9A,0xBC,0xDE,0xF0,
-	   0x12,0x34,0x56,0x78,0x9A,0xBC,0xDE,0xF0,
-	   0x12,0x34,0x56,0x78,0xff},
-	{0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0xff},
-	{0},
-	};
-
-static unsigned char output[7][30]={
-	{0x75,0xb7,0x87,0x80,0x99,0xe0,0xc5,0x96,0x00},
-	{0x74,0x94,0xc2,0xe7,0x10,0x4b,0x08,0x79,0x00},
-	{0xde,0x18,0x89,0x41,0xa3,0x37,0x5d,0x3a,0x00},
-	{0xd6,0xa1,0x41,0xa7,0xec,0x3c,0x38,0xdf,
-	 0xbd,0x61,0x5a,0x11,0x62,0xe1,0xc7,0xba,
-	 0x36,0xb6,0x78,0x58,0x00},
-	{0x66,0xa0,0x94,0x9f,0x8a,0xf7,0xd6,0x89,
-	 0x1f,0x7f,0x83,0x2b,0xa8,0x33,0xc0,0x0c,
-	 0x89,0x2e,0xbe,0x30,0x14,0x3c,0xe2,0x87,
-	 0x40,0x01,0x1e,0xcf,0x00},
-	{0xd6,0xa1,0x41,0xa7,0xec,0x3c,0x38,0xdf,0xbd,0x61,0x00},
-	{0},
-	};
-
-int main(int argc, char *argv[])
-	{
-	int err=0;
-	unsigned int i, j;
-	unsigned char *p;
-	RC4_KEY key;
-	unsigned char obuf[512];
-
-	for (i=0; i<6; i++)
-		{
-		RC4_set_key(&key,keys[i][0],&(keys[i][1]));
-		memset(obuf,0x00,sizeof(obuf));
-		RC4(&key,data_len[i],&(data[i][0]),obuf);
-		if (memcmp(obuf,output[i],data_len[i]+1) != 0)
-			{
-			printf("error calculating RC4\n");
-			printf("output:");
-			for (j=0; j<data_len[i]+1U; j++)
-				printf(" %02x",obuf[j]);
-			printf("\n");
-			printf("expect:");
-			p= &(output[i][0]);
-			for (j=0; j<data_len[i]+1U; j++)
-				printf(" %02x",*(p++));
-			printf("\n");
-			err++;
-			}
-		else
-			printf("test %d ok\n",i);
-		}
-	printf("test end processing ");
-	for (i=0; i<data_len[3]; i++)
-		{
-		RC4_set_key(&key,keys[3][0],&(keys[3][1]));
-		memset(obuf,0x00,sizeof(obuf));
-		RC4(&key,i,&(data[3][0]),obuf);
-		if ((memcmp(obuf,output[3],i) != 0) || (obuf[i] != 0))
-			{
-			printf("error in RC4 length processing\n");
-			printf("output:");
-			for (j=0; j<i+1; j++)
-				printf(" %02x",obuf[j]);
-			printf("\n");
-			printf("expect:");
-			p= &(output[3][0]);
-			for (j=0; j<i; j++)
-				printf(" %02x",*(p++));
-			printf(" 00\n");
-			err++;
-			}
-		else
-			{
-			printf(".");
-			fflush(stdout);
-			}
-		}
-	printf("done\n");
-	printf("test multi-call ");
-	for (i=0; i<data_len[3]; i++)
-		{
-		RC4_set_key(&key,keys[3][0],&(keys[3][1]));
-		memset(obuf,0x00,sizeof(obuf));
-		RC4(&key,i,&(data[3][0]),obuf);
-		RC4(&key,data_len[3]-i,&(data[3][i]),&(obuf[i]));
-		if (memcmp(obuf,output[3],data_len[3]+1) != 0)
-			{
-			printf("error in RC4 multi-call processing\n");
-			printf("output:");
-			for (j=0; j<data_len[3]+1U; j++)
-				printf(" %02x",obuf[j]);
-			printf("\n");
-			printf("expect:");
-			p= &(output[3][0]);
-			for (j=0; j<data_len[3]+1U; j++)
-				printf(" %02x",*(p++));
-			err++;
-			}
-		else
-			{
-			printf(".");
-			fflush(stdout);
-			}
-		}
-	printf("done\n");
-	printf("bulk test ");
-	{   unsigned char buf[513];
-	    SHA_CTX c;
-	    unsigned char md[SHA_DIGEST_LENGTH];
-	    static unsigned char expected[]={
-		0xa4,0x7b,0xcc,0x00,0x3d,0xd0,0xbd,0xe1,0xac,0x5f,
-		0x12,0x1e,0x45,0xbc,0xfb,0x1a,0xa1,0xf2,0x7f,0xc5 };
-
-		RC4_set_key(&key,keys[0][0],&(keys[3][1]));
-		memset(buf,'\0',sizeof(buf));
-		SHA1_Init(&c);
-		for (i=0;i<2571;i++) {
-			RC4(&key,sizeof(buf),buf,buf);
-			SHA1_Update(&c,buf,sizeof(buf));
-		}
-		SHA1_Final(md,&c);
-
-		if (memcmp(md,expected,sizeof(md))) {
-			printf("error in RC4 bulk test\n");
-			printf("output:");
-			for (j=0; j<sizeof(md); j++)
-				printf(" %02x",md[j]);
-			printf("\n");
-			printf("expect:");
-			for (j=0; j<sizeof(md); j++)
-				printf(" %02x",expected[j]);
-			printf("\n");
-			err++;
-		}
-		else	printf("ok\n");
-	}
-#ifdef OPENSSL_SYS_NETWARE
-    if (err) printf("ERROR: %d\n", err);
-#endif
-	EXIT(err);
-	return(0);
-	}
-#endif
diff --git a/crypto/openssl/crypto/rc4/rrc4.doc b/crypto/openssl/crypto/rc4/rrc4.doc
deleted file mode 100644
index 2f9a953c12f7..000000000000
--- a/crypto/openssl/crypto/rc4/rrc4.doc
+++ /dev/null
@@ -1,278 +0,0 @@
-Newsgroups: sci.crypt,alt.security,comp.security.misc,alt.privacy
-Path: ghost.dsi.unimi.it!univ-lyon1.fr!jussieu.fr!zaphod.crihan.fr!warwick!clyde.open.ac.uk!strath-cs!bnr.co.uk!bt!pipex!howland.reston.ans.net!europa.eng.gtefsd.com!MathWorks.Com!yeshua.marcam.com!charnel.ecst.csuchico.edu!csusac!csus.edu!netcom.com!sterndark
-From: sterndark@netcom.com (David Sterndark)
-Subject: RC4 Algorithm revealed.
-Message-ID: <sternCvKL4B.Hyy@netcom.com>
-Sender: sterndark@netcom.com 
-Organization: NETCOM On-line Communication Services (408 261-4700 guest)
-X-Newsreader: TIN [version 1.2 PL1]
-Date: Wed, 14 Sep 1994 06:35:31 GMT
-Lines: 263
-Xref: ghost.dsi.unimi.it sci.crypt:27332 alt.security:14732 comp.security.misc:11701 alt.privacy:16026
-
-I am shocked,  shocked, I tell you,  shocked, to discover
-that the cypherpunks have illegaly and criminally revealed
-a crucial RSA trade secret and harmed the security of
-America by reverse engineering the RC4 algorithm and
-publishing it to the world.
- 
-On Saturday morning an anonymous cypherpunk wrote:
- 
- 
-   SUBJECT:  RC4 Source Code
- 
- 
-   I've tested this.  It is compatible with the RC4 object module
-   that comes in the various RSA toolkits.  
- 
-   /* rc4.h */
-   typedef struct rc4_key
-   {      
-        unsigned char state[256];       
-        unsigned char x;        
-        unsigned char y;
-   } rc4_key;
-   void prepare_key(unsigned char *key_data_ptr,int key_data_len,
-   rc4_key *key);
-   void rc4(unsigned char *buffer_ptr,int buffer_len,rc4_key * key);
-   
-   
-   /*rc4.c */
-   #include "rc4.h"
-   static void swap_byte(unsigned char *a, unsigned char *b);
-   void prepare_key(unsigned char *key_data_ptr, int key_data_len,
-   rc4_key *key)
-   {
-        unsigned char swapByte;
-        unsigned char index1;
-        unsigned char index2;
-        unsigned char* state;
-        short counter;     
-        
-        state = &key->state[0];         
-        for(counter = 0; counter < 256; counter++)              
-        state[counter] = counter;               
-        key->x = 0;     
-        key->y = 0;     
-        index1 = 0;     
-        index2 = 0;             
-        for(counter = 0; counter < 256; counter++)      
-        {               
-             index2 = (key_data_ptr[index1] + state[counter] +
-                index2) % 256;                
-             swap_byte(&state[counter], &state[index2]);            
-   
-             index1 = (index1 + 1) % key_data_len;  
-        }       
-    }
-    
-    void rc4(unsigned char *buffer_ptr, int buffer_len, rc4_key *key)
-    { 
-        unsigned char x;
-        unsigned char y;
-        unsigned char* state;
-        unsigned char xorIndex;
-        short counter;              
-        
-        x = key->x;     
-        y = key->y;     
-        
-        state = &key->state[0];         
-        for(counter = 0; counter < buffer_len; counter ++)      
-        {               
-             x = (x + 1) % 256;                      
-             y = (state[x] + y) % 256;               
-             swap_byte(&state[x], &state[y]);                        
-                  
-             xorIndex = (state[x] + state[y]) % 256;                 
-                  
-             buffer_ptr[counter] ^= state[xorIndex];         
-         }               
-         key->x = x;     
-         key->y = y;
-    }
-    
-    static void swap_byte(unsigned char *a, unsigned char *b)
-    {
-        unsigned char swapByte; 
-        
-        swapByte = *a; 
-        *a = *b;      
-        *b = swapByte;
-    }
- 
- 
- 
-Another cypherpunk, this one not anonymous, tested the
-output from this algorithm against the output from
-official RC4 object code
- 
- 
-   Date: Tue, 13 Sep 94 18:37:56 PDT
-   From: ekr@eit.COM (Eric Rescorla)
-   Message-Id: <9409140137.AA17743@eitech.eit.com>
-   Subject: RC4 compatibility testing
-   Cc: cypherpunks@toad.com
-   
-   One data point:
-   
-   I can't say anything about the internals of RC4 versus the
-   algorithm that Bill Sommerfeld is rightly calling 'Alleged RC4',
-   since I don't know anything about RC4's internals. 
-   
-   However, I do have a (legitimately acquired) copy of BSAFE2 and
-   so I'm able to compare the output of this algorithm to the output
-   of genuine RC4 as found in BSAFE. I chose a set of test vectors
-   and ran them through both algorithms. The algorithms appear to
-   give identical results, at least with these key/plaintext pairs.
-   
-   I note that this is the algorithm _without_ Hal Finney's
-   proposed modification
-   
-   (see <199409130605.XAA24133@jobe.shell.portal.com>).
-   
-   The vectors I used (together with the ciphertext they produce)
-   follow at the end of this message.
-   
-   -Ekr
-   
-   Disclaimer: This posting does not reflect the opinions of EIT.
-   
-   --------------------results follow--------------
-   Test vector 0
-   Key: 0x01 0x23 0x45 0x67 0x89 0xab 0xcd 0xef 
-   Input: 0x01 0x23 0x45 0x67 0x89 0xab 0xcd 0xef 
-   0 Output: 0x75 0xb7 0x87 0x80 0x99 0xe0 0xc5 0x96 
-   
-   Test vector 1
-   Key: 0x01 0x23 0x45 0x67 0x89 0xab 0xcd 0xef 
-   Input: 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 
-   0 Output: 0x74 0x94 0xc2 0xe7 0x10 0x4b 0x08 0x79 
-   
-   Test vector 2
-   Key: 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 
-   Input: 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 
-   0 Output: 0xde 0x18 0x89 0x41 0xa3 0x37 0x5d 0x3a 
-   
-   Test vector 3
-   Key: 0xef 0x01 0x23 0x45 
-   Input: 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 
-   0 Output: 0xd6 0xa1 0x41 0xa7 0xec 0x3c 0x38 0xdf 0xbd 0x61 
-   
-   Test vector 4
-   Key: 0x01 0x23 0x45 0x67 0x89 0xab 0xcd 0xef 
-   Input: 0x01 0x01 0x01 0x01 0x01 0x01 0x01 0x01 0x01 0x01 0x01 
-   0x01 0x01 0x01 0x01 0x01 0x01 0x01 0x01 0x01 0x01 
-   0x01 0x01 0x01 0x01 0x01 0x01 0x01 0x01 0x01 0x01 
-   0x01 0x01 0x01 0x01 0x01 0x01 0x01 0x01 0x01 0x01 
-   0x01 0x01 0x01 0x01 0x01 0x01 0x01 0x01 0x01 0x01 
-   0x01 0x01 0x01 0x01 0x01 0x01 0x01 0x01 0x01 0x01 
-   0x01 0x01 0x01 0x01 0x01 0x01 0x01 0x01 0x01 0x01 
-   0x01 0x01 0x01 0x01 0x01 0x01 0x01 0x01 0x01 0x01 
-   0x01 0x01 0x01 0x01 0x01 0x01 0x01 0x01 0x01 0x01 
-   0x01 0x01 0x01 0x01 0x01 0x01 0x01 0x01 0x01 0x01 
-   0x01 0x01 0x01 0x01 0x01 0x01 0x01 0x01 0x01 0x01 
-   0x01 0x01 0x01 0x01 0x01 0x01 0x01 0x01 0x01 0x01 
-   0x01 0x01 0x01 0x01 0x01 0x01 0x01 0x01 0x01 0x01 
-   0x01 0x01 0x01 0x01 0x01 0x01 0x01 0x01 0x01 0x01 
-   0x01 0x01 0x01 0x01 0x01 0x01 0x01 0x01 0x01 0x01 
-   0x01 0x01 0x01 0x01 0x01 0x01 0x01 0x01 0x01 0x01 
-   0x01 0x01 0x01 0x01 0x01 0x01 0x01 0x01 0x01 0x01 
-   0x01 0x01 0x01 0x01 0x01 0x01 0x01 0x01 0x01 0x01 
-   0x01 0x01 0x01 0x01 0x01 0x01 0x01 0x01 0x01 0x01 
-   0x01 0x01 0x01 0x01 0x01 0x01 0x01 0x01 0x01 0x01 
-   0x01 0x01 0x01 0x01 0x01 0x01 0x01 0x01 0x01 0x01 
-   0x01 0x01 0x01 0x01 0x01 0x01 0x01 0x01 0x01 0x01 
-   0x01 0x01 0x01 0x01 0x01 0x01 0x01 0x01 0x01 0x01 
-   0x01 0x01 0x01 0x01 0x01 0x01 0x01 0x01 0x01 0x01 
-   0x01 0x01 0x01 0x01 0x01 0x01 0x01 0x01 0x01 0x01 
-   0x01 0x01 0x01 0x01 0x01 0x01 0x01 0x01 0x01 0x01 
-   0x01 0x01 0x01 0x01 0x01 0x01 0x01 0x01 0x01 0x01 
-   0x01 0x01 0x01 0x01 0x01 0x01 0x01 0x01 0x01 0x01 
-   0x01 0x01 0x01 0x01 0x01 0x01 0x01 0x01 0x01 0x01 
-   0x01 0x01 0x01 0x01 0x01 0x01 0x01 0x01 0x01 0x01 
-   0x01 0x01 0x01 0x01 0x01 0x01 0x01 0x01 0x01 0x01 
-   0x01 0x01 0x01 0x01 0x01 0x01 0x01 0x01 0x01 0x01 
-   0x01 0x01 0x01 0x01 0x01 0x01 0x01 0x01 0x01 0x01 
-   0x01 0x01 0x01 0x01 0x01 0x01 0x01 0x01 0x01 0x01 
-   0x01 0x01 0x01 0x01 0x01 0x01 0x01 0x01 0x01 0x01 
-   0x01 0x01 0x01 0x01 0x01 0x01 0x01 0x01 0x01 0x01 
-   0x01 0x01 0x01 0x01 0x01 0x01 0x01 0x01 0x01 0x01 
-   0x01 0x01 0x01 0x01 0x01 0x01 0x01 0x01 0x01 0x01 
-   0x01 0x01 0x01 0x01 0x01 0x01 0x01 0x01 0x01 0x01 
-   0x01 0x01 0x01 0x01 0x01 0x01 0x01 0x01 0x01 0x01 
-   0x01 0x01 0x01 0x01 0x01 0x01 0x01 0x01 0x01 0x01 
-   0x01 0x01 0x01 0x01 0x01 0x01 0x01 0x01 0x01 0x01 
-   0x01 0x01 0x01 0x01 0x01 0x01 0x01 0x01 0x01 0x01 
-   0x01 0x01 0x01 0x01 0x01 0x01 0x01 0x01 0x01 0x01 
-   0x01 0x01 0x01 0x01 0x01 0x01 0x01 0x01 0x01 0x01 
-   0x01 0x01 0x01 0x01 0x01 0x01 0x01 0x01 0x01 0x01 
-   0x01 0x01 0x01 0x01 0x01 0x01 0x01 0x01 0x01 0x01 
-   0x01 0x01 0x01 0x01 0x01 0x01 0x01 0x01 0x01 0x01 
-   0x01 0x01 0x01 0x01 0x01 0x01 0x01 0x01 0x01 0x01 
-   0x01 0x01 0x01 0x01 0x01 0x01 0x01 0x01 0x01 0x01 
-   0x01 0x01 0x01 0x01 0x01 0x01 0x01 0x01 0x01 0x01 
-   0x01 
-   0 Output: 0x75 0x95 0xc3 0xe6 0x11 0x4a 0x09 0x78 0x0c 0x4a 0xd4 
-   0x52 0x33 0x8e 0x1f 0xfd 0x9a 0x1b 0xe9 0x49 0x8f 
-   0x81 0x3d 0x76 0x53 0x34 0x49 0xb6 0x77 0x8d 0xca 
-   0xd8 0xc7 0x8a 0x8d 0x2b 0xa9 0xac 0x66 0x08 0x5d 
-   0x0e 0x53 0xd5 0x9c 0x26 0xc2 0xd1 0xc4 0x90 0xc1 
-   0xeb 0xbe 0x0c 0xe6 0x6d 0x1b 0x6b 0x1b 0x13 0xb6 
-   0xb9 0x19 0xb8 0x47 0xc2 0x5a 0x91 0x44 0x7a 0x95 
-   0xe7 0x5e 0x4e 0xf1 0x67 0x79 0xcd 0xe8 0xbf 0x0a 
-   0x95 0x85 0x0e 0x32 0xaf 0x96 0x89 0x44 0x4f 0xd3 
-   0x77 0x10 0x8f 0x98 0xfd 0xcb 0xd4 0xe7 0x26 0x56 
-   0x75 0x00 0x99 0x0b 0xcc 0x7e 0x0c 0xa3 0xc4 0xaa 
-   0xa3 0x04 0xa3 0x87 0xd2 0x0f 0x3b 0x8f 0xbb 0xcd 
-   0x42 0xa1 0xbd 0x31 0x1d 0x7a 0x43 0x03 0xdd 0xa5 
-   0xab 0x07 0x88 0x96 0xae 0x80 0xc1 0x8b 0x0a 0xf6 
-   0x6d 0xff 0x31 0x96 0x16 0xeb 0x78 0x4e 0x49 0x5a 
-   0xd2 0xce 0x90 0xd7 0xf7 0x72 0xa8 0x17 0x47 0xb6 
-   0x5f 0x62 0x09 0x3b 0x1e 0x0d 0xb9 0xe5 0xba 0x53 
-   0x2f 0xaf 0xec 0x47 0x50 0x83 0x23 0xe6 0x71 0x32 
-   0x7d 0xf9 0x44 0x44 0x32 0xcb 0x73 0x67 0xce 0xc8 
-   0x2f 0x5d 0x44 0xc0 0xd0 0x0b 0x67 0xd6 0x50 0xa0 
-   0x75 0xcd 0x4b 0x70 0xde 0xdd 0x77 0xeb 0x9b 0x10 
-   0x23 0x1b 0x6b 0x5b 0x74 0x13 0x47 0x39 0x6d 0x62 
-   0x89 0x74 0x21 0xd4 0x3d 0xf9 0xb4 0x2e 0x44 0x6e 
-   0x35 0x8e 0x9c 0x11 0xa9 0xb2 0x18 0x4e 0xcb 0xef 
-   0x0c 0xd8 0xe7 0xa8 0x77 0xef 0x96 0x8f 0x13 0x90 
-   0xec 0x9b 0x3d 0x35 0xa5 0x58 0x5c 0xb0 0x09 0x29 
-   0x0e 0x2f 0xcd 0xe7 0xb5 0xec 0x66 0xd9 0x08 0x4b 
-   0xe4 0x40 0x55 0xa6 0x19 0xd9 0xdd 0x7f 0xc3 0x16 
-   0x6f 0x94 0x87 0xf7 0xcb 0x27 0x29 0x12 0x42 0x64 
-   0x45 0x99 0x85 0x14 0xc1 0x5d 0x53 0xa1 0x8c 0x86 
-   0x4c 0xe3 0xa2 0xb7 0x55 0x57 0x93 0x98 0x81 0x26 
-   0x52 0x0e 0xac 0xf2 0xe3 0x06 0x6e 0x23 0x0c 0x91 
-   0xbe 0xe4 0xdd 0x53 0x04 0xf5 0xfd 0x04 0x05 0xb3 
-   0x5b 0xd9 0x9c 0x73 0x13 0x5d 0x3d 0x9b 0xc3 0x35 
-   0xee 0x04 0x9e 0xf6 0x9b 0x38 0x67 0xbf 0x2d 0x7b 
-   0xd1 0xea 0xa5 0x95 0xd8 0xbf 0xc0 0x06 0x6f 0xf8 
-   0xd3 0x15 0x09 0xeb 0x0c 0x6c 0xaa 0x00 0x6c 0x80 
-   0x7a 0x62 0x3e 0xf8 0x4c 0x3d 0x33 0xc1 0x95 0xd2 
-   0x3e 0xe3 0x20 0xc4 0x0d 0xe0 0x55 0x81 0x57 0xc8 
-   0x22 0xd4 0xb8 0xc5 0x69 0xd8 0x49 0xae 0xd5 0x9d 
-   0x4e 0x0f 0xd7 0xf3 0x79 0x58 0x6b 0x4b 0x7f 0xf6 
-   0x84 0xed 0x6a 0x18 0x9f 0x74 0x86 0xd4 0x9b 0x9c 
-   0x4b 0xad 0x9b 0xa2 0x4b 0x96 0xab 0xf9 0x24 0x37 
-   0x2c 0x8a 0x8f 0xff 0xb1 0x0d 0x55 0x35 0x49 0x00 
-   0xa7 0x7a 0x3d 0xb5 0xf2 0x05 0xe1 0xb9 0x9f 0xcd 
-   0x86 0x60 0x86 0x3a 0x15 0x9a 0xd4 0xab 0xe4 0x0f 
-   0xa4 0x89 0x34 0x16 0x3d 0xdd 0xe5 0x42 0xa6 0x58 
-   0x55 0x40 0xfd 0x68 0x3c 0xbf 0xd8 0xc0 0x0f 0x12 
-   0x12 0x9a 0x28 0x4d 0xea 0xcc 0x4c 0xde 0xfe 0x58 
-   0xbe 0x71 0x37 0x54 0x1c 0x04 0x71 0x26 0xc8 0xd4 
-   0x9e 0x27 0x55 0xab 0x18 0x1a 0xb7 0xe9 0x40 0xb0 
-   0xc0 
-   
-
-
--- 
- ---------------------------------------------------------------------
-We have the right to defend ourselves and our
-property, because of the kind of animals that we              James A. Donald
-are.  True law derives from this right, not from
-the arbitrary power of the omnipotent state.                jamesd@netcom.com
-
-
diff --git a/crypto/openssl/crypto/rc5/Makefile b/crypto/openssl/crypto/rc5/Makefile
deleted file mode 100644
index efb0f36b5980..000000000000
--- a/crypto/openssl/crypto/rc5/Makefile
+++ /dev/null
@@ -1,103 +0,0 @@
-#
-# OpenSSL/crypto/rc5/Makefile
-#
-
-DIR=	rc5
-TOP=	../..
-CC=	cc
-CPP=	$(CC) -E
-INCLUDES=
-CFLAG=-g
-MAKEFILE=	Makefile
-AR=		ar r
-
-RC5_ENC=		rc5_enc.o
-# or use
-#DES_ENC=	r586-elf.o
-
-CFLAGS= $(INCLUDES) $(CFLAG)
-ASFLAGS= $(INCLUDES) $(ASFLAG)
-AFLAGS= $(ASFLAGS)
-
-GENERAL=Makefile
-TEST=rc5test.c
-APPS=
-
-LIB=$(TOP)/libcrypto.a
-LIBSRC=rc5_skey.c rc5_ecb.c rc5_enc.c rc5cfb64.c rc5ofb64.c 
-LIBOBJ=rc5_skey.o rc5_ecb.o $(RC5_ENC) rc5cfb64.o rc5ofb64.o
-
-SRC= $(LIBSRC)
-
-EXHEADER= rc5.h
-HEADER=	rc5_locl.h $(EXHEADER)
-
-ALL=    $(GENERAL) $(SRC) $(HEADER)
-
-top:
-	(cd ../..; $(MAKE) DIRS=crypto SDIRS=$(DIR) sub_all)
-
-all:	lib
-
-lib:	$(LIBOBJ)
-	$(AR) $(LIB) $(LIBOBJ)
-	$(RANLIB) $(LIB) || echo Never mind.
-	@touch lib
-
-# ELF
-r586-elf.s: asm/rc5-586.pl ../perlasm/x86asm.pl ../perlasm/cbc.pl
-	(cd asm; $(PERL) rc5-586.pl elf $(CFLAGS) > ../$@)
-# COFF
-r586-cof.s: asm/rc5-586.pl ../perlasm/x86asm.pl ../perlasm/cbc.pl
-	(cd asm; $(PERL) rc5-586.pl coff $(CFLAGS) > ../$@)
-# a.out
-r586-out.s: asm/rc5-586.pl ../perlasm/x86asm.pl ../perlasm/cbc.pl
-	(cd asm; $(PERL) rc5-586.pl a.out $(CFLAGS) > ../$@)
-
-files:
-	$(PERL) $(TOP)/util/files.pl Makefile >> $(TOP)/MINFO
-
-links:
-	@$(PERL) $(TOP)/util/mklink.pl ../../include/openssl $(EXHEADER)
-	@$(PERL) $(TOP)/util/mklink.pl ../../test $(TEST)
-	@$(PERL) $(TOP)/util/mklink.pl ../../apps $(APPS)
-
-install:
-	@[ -n "$(INSTALLTOP)" ] # should be set by top Makefile...
-	@headerlist="$(EXHEADER)"; for i in $$headerlist ; \
-	do  \
-	(cp $$i $(INSTALL_PREFIX)$(INSTALLTOP)/include/openssl/$$i; \
-	chmod 644 $(INSTALL_PREFIX)$(INSTALLTOP)/include/openssl/$$i ); \
-	done;
-
-tags:
-	ctags $(SRC)
-
-tests:
-
-lint:
-	lint -DLINT $(INCLUDES) $(SRC)>fluff
-
-depend:
-	@[ -n "$(MAKEDEPEND)" ] # should be set by upper Makefile...
-	$(MAKEDEPEND) -- $(CFLAG) $(INCLUDES) $(DEPFLAG) -- $(PROGS) $(LIBSRC)
-
-dclean:
-	$(PERL) -pe 'if (/^# DO NOT DELETE THIS LINE/) {print; exit(0);}' $(MAKEFILE) >Makefile.new
-	mv -f Makefile.new $(MAKEFILE)
-
-clean:
-	rm -f *.s *.o *.obj lib tags core .pure .nfs* *.old *.bak fluff
-
-# DO NOT DELETE THIS LINE -- make depend depends on it.
-
-rc5_ecb.o: ../../include/openssl/opensslconf.h ../../include/openssl/opensslv.h
-rc5_ecb.o: ../../include/openssl/rc5.h rc5_ecb.c rc5_locl.h
-rc5_enc.o: ../../include/openssl/opensslconf.h ../../include/openssl/rc5.h
-rc5_enc.o: rc5_enc.c rc5_locl.h
-rc5_skey.o: ../../include/openssl/opensslconf.h ../../include/openssl/rc5.h
-rc5_skey.o: rc5_locl.h rc5_skey.c
-rc5cfb64.o: ../../include/openssl/opensslconf.h ../../include/openssl/rc5.h
-rc5cfb64.o: rc5_locl.h rc5cfb64.c
-rc5ofb64.o: ../../include/openssl/opensslconf.h ../../include/openssl/rc5.h
-rc5ofb64.o: rc5_locl.h rc5ofb64.c
diff --git a/crypto/openssl/crypto/rc5/asm/rc5-586.pl b/crypto/openssl/crypto/rc5/asm/rc5-586.pl
deleted file mode 100644
index edff1d1e64af..000000000000
--- a/crypto/openssl/crypto/rc5/asm/rc5-586.pl
+++ /dev/null
@@ -1,109 +0,0 @@
-#!/usr/local/bin/perl
-
-push(@INC,"perlasm","../../perlasm");
-require "x86asm.pl";
-require "cbc.pl";
-
-&asm_init($ARGV[0],"rc5-586.pl");
-
-$RC5_MAX_ROUNDS=16;
-$RC5_32_OFF=($RC5_MAX_ROUNDS+2)*4;
-$A="edi";
-$B="esi";
-$S="ebp";
-$tmp1="eax";
-$r="ebx";
-$tmpc="ecx";
-$tmp4="edx";
-
-&RC5_32_encrypt("RC5_32_encrypt",1);
-&RC5_32_encrypt("RC5_32_decrypt",0);
-&cbc("RC5_32_cbc_encrypt","RC5_32_encrypt","RC5_32_decrypt",0,4,5,3,-1,-1);
-&asm_finish();
-
-sub RC5_32_encrypt
-	{
-	local($name,$enc)=@_;
-
-	&function_begin_B($name,"");
-
-	&comment("");
-
-	&push("ebp");
-	 &push("esi");
-	&push("edi");
-	 &mov($tmp4,&wparam(0));
-	&mov($S,&wparam(1));
-
-	&comment("Load the 2 words");
-	 &mov($A,&DWP(0,$tmp4,"",0));
-	&mov($B,&DWP(4,$tmp4,"",0));
-
-	&push($r);
-	 &mov($r,	&DWP(0,$S,"",0));
-
-	# encrypting part
-
-	if ($enc)
-		{
-		 &add($A,	&DWP(4+0,$S,"",0));
-		&add($B,	&DWP(4+4,$S,"",0));
-
-		for ($i=0; $i<$RC5_MAX_ROUNDS; $i++)
-			{
-			 &xor($A,	$B);
-			&mov($tmp1,	&DWP(12+$i*8,$S,"",0));
-			 &mov($tmpc,	$B);
-			&rotl($A,	&LB("ecx"));
-			&add($A,	$tmp1);
-
-			 &xor($B,	$A);
-			&mov($tmp1,	&DWP(16+$i*8,$S,"",0));
-			 &mov($tmpc,	$A);
-			&rotl($B,	&LB("ecx"));
-			&add($B,	$tmp1);
-			if (($i == 7) || ($i == 11))
-				{
-			 &cmp($r,	$i+1);
-			&je(&label("rc5_exit"));
-				}
-			}
-		}
-	else
-		{
-		 &cmp($r,	12);
-		&je(&label("rc5_dec_12"));
-		 &cmp($r,	8);
-		&je(&label("rc5_dec_8"));
-		for ($i=$RC5_MAX_ROUNDS; $i > 0; $i--)
-			{
-			&set_label("rc5_dec_$i") if ($i == 12) || ($i == 8);
-			 &mov($tmp1,	&DWP($i*8+8,$S,"",0));
-			&sub($B,	$tmp1);
-			 &mov($tmpc,	$A);
-			&rotr($B,	&LB("ecx"));
-			&xor($B,	$A);
-
-			 &mov($tmp1,	&DWP($i*8+4,$S,"",0));
-			&sub($A,	$tmp1);
-			 &mov($tmpc,	$B);
-			&rotr($A,	&LB("ecx"));
-			&xor($A,	$B);
-			}
-		 &sub($B,	&DWP(4+4,$S,"",0));
-		&sub($A,	&DWP(4+0,$S,"",0));
-		}
-
-	&set_label("rc5_exit");
-	 &mov(&DWP(0,$tmp4,"",0),$A);
-	&mov(&DWP(4,$tmp4,"",0),$B);
-
-	 &pop("ebx");
-	&pop("edi");
-	 &pop("esi");
-	&pop("ebp");
-	 &ret();
-	&function_end_B($name);
-	}
-
-
diff --git a/crypto/openssl/crypto/rc5/rc5.h b/crypto/openssl/crypto/rc5/rc5.h
deleted file mode 100644
index 4b3c153b5038..000000000000
--- a/crypto/openssl/crypto/rc5/rc5.h
+++ /dev/null
@@ -1,118 +0,0 @@
-/* crypto/rc5/rc5.h */
-/* Copyright (C) 1995-1998 Eric Young (eay@cryptsoft.com)
- * All rights reserved.
- *
- * This package is an SSL implementation written
- * by Eric Young (eay@cryptsoft.com).
- * The implementation was written so as to conform with Netscapes SSL.
- * 
- * This library is free for commercial and non-commercial use as long as
- * the following conditions are aheared to.  The following conditions
- * apply to all code found in this distribution, be it the RC4, RSA,
- * lhash, DES, etc., code; not just the SSL code.  The SSL documentation
- * included with this distribution is covered by the same copyright terms
- * except that the holder is Tim Hudson (tjh@cryptsoft.com).
- * 
- * Copyright remains Eric Young's, and as such any Copyright notices in
- * the code are not to be removed.
- * If this package is used in a product, Eric Young should be given attribution
- * as the author of the parts of the library used.
- * This can be in the form of a textual message at program startup or
- * in documentation (online or textual) provided with the package.
- * 
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions
- * are met:
- * 1. Redistributions of source code must retain the copyright
- *    notice, this list of conditions and the following disclaimer.
- * 2. Redistributions in binary form must reproduce the above copyright
- *    notice, this list of conditions and the following disclaimer in the
- *    documentation and/or other materials provided with the distribution.
- * 3. All advertising materials mentioning features or use of this software
- *    must display the following acknowledgement:
- *    "This product includes cryptographic software written by
- *     Eric Young (eay@cryptsoft.com)"
- *    The word 'cryptographic' can be left out if the rouines from the library
- *    being used are not cryptographic related :-).
- * 4. If you include any Windows specific code (or a derivative thereof) from 
- *    the apps directory (application code) you must include an acknowledgement:
- *    "This product includes software written by Tim Hudson (tjh@cryptsoft.com)"
- * 
- * THIS SOFTWARE IS PROVIDED BY ERIC YOUNG ``AS IS'' AND
- * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
- * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
- * ARE DISCLAIMED.  IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE
- * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
- * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
- * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
- * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
- * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
- * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
- * SUCH DAMAGE.
- * 
- * The licence and distribution terms for any publically available version or
- * derivative of this code cannot be changed.  i.e. this code cannot simply be
- * copied and put under another distribution licence
- * [including the GNU Public Licence.]
- */
-
-#ifndef HEADER_RC5_H
-#define HEADER_RC5_H
-
-#include <openssl/opensslconf.h> /* OPENSSL_NO_RC5 */
-
-#ifdef  __cplusplus
-extern "C" {
-#endif
-
-#ifdef OPENSSL_NO_RC5
-#error RC5 is disabled.
-#endif
-
-#define RC5_ENCRYPT	1
-#define RC5_DECRYPT	0
-
-/* 32 bit.  For Alpha, things may get weird */
-#define RC5_32_INT unsigned long
-
-#define RC5_32_BLOCK		8
-#define RC5_32_KEY_LENGTH	16 /* This is a default, max is 255 */
-
-/* This are the only values supported.  Tweak the code if you want more
- * The most supported modes will be
- * RC5-32/12/16
- * RC5-32/16/8
- */
-#define RC5_8_ROUNDS	8
-#define RC5_12_ROUNDS	12
-#define RC5_16_ROUNDS	16
-
-typedef struct rc5_key_st
-	{
-	/* Number of rounds */
-	int rounds;
-	RC5_32_INT data[2*(RC5_16_ROUNDS+1)];
-	} RC5_32_KEY;
-
- 
-void RC5_32_set_key(RC5_32_KEY *key, int len, const unsigned char *data,
-	int rounds);
-void RC5_32_ecb_encrypt(const unsigned char *in,unsigned char *out,RC5_32_KEY *key,
-	int enc);
-void RC5_32_encrypt(unsigned long *data,RC5_32_KEY *key);
-void RC5_32_decrypt(unsigned long *data,RC5_32_KEY *key);
-void RC5_32_cbc_encrypt(const unsigned char *in, unsigned char *out,
-			long length, RC5_32_KEY *ks, unsigned char *iv,
-			int enc);
-void RC5_32_cfb64_encrypt(const unsigned char *in, unsigned char *out,
-			  long length, RC5_32_KEY *schedule,
-			  unsigned char *ivec, int *num, int enc);
-void RC5_32_ofb64_encrypt(const unsigned char *in, unsigned char *out,
-			  long length, RC5_32_KEY *schedule,
-			  unsigned char *ivec, int *num);
-
-#ifdef  __cplusplus
-}
-#endif
-
-#endif
diff --git a/crypto/openssl/crypto/rc5/rc5_ecb.c b/crypto/openssl/crypto/rc5/rc5_ecb.c
deleted file mode 100644
index e72b535507c6..000000000000
--- a/crypto/openssl/crypto/rc5/rc5_ecb.c
+++ /dev/null
@@ -1,80 +0,0 @@
-/* crypto/rc5/rc5_ecb.c */
-/* Copyright (C) 1995-1998 Eric Young (eay@cryptsoft.com)
- * All rights reserved.
- *
- * This package is an SSL implementation written
- * by Eric Young (eay@cryptsoft.com).
- * The implementation was written so as to conform with Netscapes SSL.
- * 
- * This library is free for commercial and non-commercial use as long as
- * the following conditions are aheared to.  The following conditions
- * apply to all code found in this distribution, be it the RC4, RSA,
- * lhash, DES, etc., code; not just the SSL code.  The SSL documentation
- * included with this distribution is covered by the same copyright terms
- * except that the holder is Tim Hudson (tjh@cryptsoft.com).
- * 
- * Copyright remains Eric Young's, and as such any Copyright notices in
- * the code are not to be removed.
- * If this package is used in a product, Eric Young should be given attribution
- * as the author of the parts of the library used.
- * This can be in the form of a textual message at program startup or
- * in documentation (online or textual) provided with the package.
- * 
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions
- * are met:
- * 1. Redistributions of source code must retain the copyright
- *    notice, this list of conditions and the following disclaimer.
- * 2. Redistributions in binary form must reproduce the above copyright
- *    notice, this list of conditions and the following disclaimer in the
- *    documentation and/or other materials provided with the distribution.
- * 3. All advertising materials mentioning features or use of this software
- *    must display the following acknowledgement:
- *    "This product includes cryptographic software written by
- *     Eric Young (eay@cryptsoft.com)"
- *    The word 'cryptographic' can be left out if the rouines from the library
- *    being used are not cryptographic related :-).
- * 4. If you include any Windows specific code (or a derivative thereof) from 
- *    the apps directory (application code) you must include an acknowledgement:
- *    "This product includes software written by Tim Hudson (tjh@cryptsoft.com)"
- * 
- * THIS SOFTWARE IS PROVIDED BY ERIC YOUNG ``AS IS'' AND
- * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
- * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
- * ARE DISCLAIMED.  IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE
- * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
- * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
- * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
- * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
- * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
- * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
- * SUCH DAMAGE.
- * 
- * The licence and distribution terms for any publically available version or
- * derivative of this code cannot be changed.  i.e. this code cannot simply be
- * copied and put under another distribution licence
- * [including the GNU Public Licence.]
- */
-
-#include <openssl/rc5.h>
-#include "rc5_locl.h"
-#include <openssl/opensslv.h>
-
-const char RC5_version[]="RC5" OPENSSL_VERSION_PTEXT;
-
-void RC5_32_ecb_encrypt(const unsigned char *in, unsigned char *out,
-			RC5_32_KEY *ks, int encrypt)
-	{
-	unsigned long l,d[2];
-
-	c2l(in,l); d[0]=l;
-	c2l(in,l); d[1]=l;
-	if (encrypt)
-		RC5_32_encrypt(d,ks);
-	else
-		RC5_32_decrypt(d,ks);
-	l=d[0]; l2c(l,out);
-	l=d[1]; l2c(l,out);
-	l=d[0]=d[1]=0;
-	}
-
diff --git a/crypto/openssl/crypto/rc5/rc5_enc.c b/crypto/openssl/crypto/rc5/rc5_enc.c
deleted file mode 100644
index f327d32a7660..000000000000
--- a/crypto/openssl/crypto/rc5/rc5_enc.c
+++ /dev/null
@@ -1,215 +0,0 @@
-/* crypto/rc5/rc5_enc.c */
-/* Copyright (C) 1995-1998 Eric Young (eay@cryptsoft.com)
- * All rights reserved.
- *
- * This package is an SSL implementation written
- * by Eric Young (eay@cryptsoft.com).
- * The implementation was written so as to conform with Netscapes SSL.
- * 
- * This library is free for commercial and non-commercial use as long as
- * the following conditions are aheared to.  The following conditions
- * apply to all code found in this distribution, be it the RC4, RSA,
- * lhash, DES, etc., code; not just the SSL code.  The SSL documentation
- * included with this distribution is covered by the same copyright terms
- * except that the holder is Tim Hudson (tjh@cryptsoft.com).
- * 
- * Copyright remains Eric Young's, and as such any Copyright notices in
- * the code are not to be removed.
- * If this package is used in a product, Eric Young should be given attribution
- * as the author of the parts of the library used.
- * This can be in the form of a textual message at program startup or
- * in documentation (online or textual) provided with the package.
- * 
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions
- * are met:
- * 1. Redistributions of source code must retain the copyright
- *    notice, this list of conditions and the following disclaimer.
- * 2. Redistributions in binary form must reproduce the above copyright
- *    notice, this list of conditions and the following disclaimer in the
- *    documentation and/or other materials provided with the distribution.
- * 3. All advertising materials mentioning features or use of this software
- *    must display the following acknowledgement:
- *    "This product includes cryptographic software written by
- *     Eric Young (eay@cryptsoft.com)"
- *    The word 'cryptographic' can be left out if the rouines from the library
- *    being used are not cryptographic related :-).
- * 4. If you include any Windows specific code (or a derivative thereof) from 
- *    the apps directory (application code) you must include an acknowledgement:
- *    "This product includes software written by Tim Hudson (tjh@cryptsoft.com)"
- * 
- * THIS SOFTWARE IS PROVIDED BY ERIC YOUNG ``AS IS'' AND
- * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
- * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
- * ARE DISCLAIMED.  IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE
- * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
- * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
- * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
- * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
- * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
- * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
- * SUCH DAMAGE.
- * 
- * The licence and distribution terms for any publically available version or
- * derivative of this code cannot be changed.  i.e. this code cannot simply be
- * copied and put under another distribution licence
- * [including the GNU Public Licence.]
- */
-
-#include <stdio.h>
-#include <openssl/rc5.h>
-#include "rc5_locl.h"
-
-void RC5_32_cbc_encrypt(const unsigned char *in, unsigned char *out,
-			long length, RC5_32_KEY *ks, unsigned char *iv,
-			int encrypt)
-	{
-	register unsigned long tin0,tin1;
-	register unsigned long tout0,tout1,xor0,xor1;
-	register long l=length;
-	unsigned long tin[2];
-
-	if (encrypt)
-		{
-		c2l(iv,tout0);
-		c2l(iv,tout1);
-		iv-=8;
-		for (l-=8; l>=0; l-=8)
-			{
-			c2l(in,tin0);
-			c2l(in,tin1);
-			tin0^=tout0;
-			tin1^=tout1;
-			tin[0]=tin0;
-			tin[1]=tin1;
-			RC5_32_encrypt(tin,ks);
-			tout0=tin[0]; l2c(tout0,out);
-			tout1=tin[1]; l2c(tout1,out);
-			}
-		if (l != -8)
-			{
-			c2ln(in,tin0,tin1,l+8);
-			tin0^=tout0;
-			tin1^=tout1;
-			tin[0]=tin0;
-			tin[1]=tin1;
-			RC5_32_encrypt(tin,ks);
-			tout0=tin[0]; l2c(tout0,out);
-			tout1=tin[1]; l2c(tout1,out);
-			}
-		l2c(tout0,iv);
-		l2c(tout1,iv);
-		}
-	else
-		{
-		c2l(iv,xor0);
-		c2l(iv,xor1);
-		iv-=8;
-		for (l-=8; l>=0; l-=8)
-			{
-			c2l(in,tin0); tin[0]=tin0;
-			c2l(in,tin1); tin[1]=tin1;
-			RC5_32_decrypt(tin,ks);
-			tout0=tin[0]^xor0;
-			tout1=tin[1]^xor1;
-			l2c(tout0,out);
-			l2c(tout1,out);
-			xor0=tin0;
-			xor1=tin1;
-			}
-		if (l != -8)
-			{
-			c2l(in,tin0); tin[0]=tin0;
-			c2l(in,tin1); tin[1]=tin1;
-			RC5_32_decrypt(tin,ks);
-			tout0=tin[0]^xor0;
-			tout1=tin[1]^xor1;
-			l2cn(tout0,tout1,out,l+8);
-			xor0=tin0;
-			xor1=tin1;
-			}
-		l2c(xor0,iv);
-		l2c(xor1,iv);
-		}
-	tin0=tin1=tout0=tout1=xor0=xor1=0;
-	tin[0]=tin[1]=0;
-	}
-
-void RC5_32_encrypt(unsigned long *d, RC5_32_KEY *key)
-	{
-	RC5_32_INT a,b,*s;
-
-	s=key->data;
-
-	a=d[0]+s[0];
-	b=d[1]+s[1];
-	E_RC5_32(a,b,s, 2);
-	E_RC5_32(a,b,s, 4);
-	E_RC5_32(a,b,s, 6);
-	E_RC5_32(a,b,s, 8);
-	E_RC5_32(a,b,s,10);
-	E_RC5_32(a,b,s,12);
-	E_RC5_32(a,b,s,14);
-	E_RC5_32(a,b,s,16);
-	if (key->rounds == 12)
-		{
-		E_RC5_32(a,b,s,18);
-		E_RC5_32(a,b,s,20);
-		E_RC5_32(a,b,s,22);
-		E_RC5_32(a,b,s,24);
-		}
-	else if (key->rounds == 16)
-		{
-		/* Do a full expansion to avoid a jump */
-		E_RC5_32(a,b,s,18);
-		E_RC5_32(a,b,s,20);
-		E_RC5_32(a,b,s,22);
-		E_RC5_32(a,b,s,24);
-		E_RC5_32(a,b,s,26);
-		E_RC5_32(a,b,s,28);
-		E_RC5_32(a,b,s,30);
-		E_RC5_32(a,b,s,32);
-		}
-	d[0]=a;
-	d[1]=b;
-	}
-
-void RC5_32_decrypt(unsigned long *d, RC5_32_KEY *key)
-	{
-	RC5_32_INT a,b,*s;
-
-	s=key->data;
-
-	a=d[0];
-	b=d[1];
-	if (key->rounds == 16) 
-		{
-		D_RC5_32(a,b,s,32);
-		D_RC5_32(a,b,s,30);
-		D_RC5_32(a,b,s,28);
-		D_RC5_32(a,b,s,26);
-		/* Do a full expansion to avoid a jump */
-		D_RC5_32(a,b,s,24);
-		D_RC5_32(a,b,s,22);
-		D_RC5_32(a,b,s,20);
-		D_RC5_32(a,b,s,18);
-		}
-	else if (key->rounds == 12)
-		{
-		D_RC5_32(a,b,s,24);
-		D_RC5_32(a,b,s,22);
-		D_RC5_32(a,b,s,20);
-		D_RC5_32(a,b,s,18);
-		}
-	D_RC5_32(a,b,s,16);
-	D_RC5_32(a,b,s,14);
-	D_RC5_32(a,b,s,12);
-	D_RC5_32(a,b,s,10);
-	D_RC5_32(a,b,s, 8);
-	D_RC5_32(a,b,s, 6);
-	D_RC5_32(a,b,s, 4);
-	D_RC5_32(a,b,s, 2);
-	d[0]=a-s[0];
-	d[1]=b-s[1];
-	}
-
diff --git a/crypto/openssl/crypto/rc5/rc5_locl.h b/crypto/openssl/crypto/rc5/rc5_locl.h
deleted file mode 100644
index 282dd3882234..000000000000
--- a/crypto/openssl/crypto/rc5/rc5_locl.h
+++ /dev/null
@@ -1,207 +0,0 @@
-/* crypto/rc5/rc5_locl.h */
-/* Copyright (C) 1995-1998 Eric Young (eay@cryptsoft.com)
- * All rights reserved.
- *
- * This package is an SSL implementation written
- * by Eric Young (eay@cryptsoft.com).
- * The implementation was written so as to conform with Netscapes SSL.
- * 
- * This library is free for commercial and non-commercial use as long as
- * the following conditions are aheared to.  The following conditions
- * apply to all code found in this distribution, be it the RC4, RSA,
- * lhash, DES, etc., code; not just the SSL code.  The SSL documentation
- * included with this distribution is covered by the same copyright terms
- * except that the holder is Tim Hudson (tjh@cryptsoft.com).
- * 
- * Copyright remains Eric Young's, and as such any Copyright notices in
- * the code are not to be removed.
- * If this package is used in a product, Eric Young should be given attribution
- * as the author of the parts of the library used.
- * This can be in the form of a textual message at program startup or
- * in documentation (online or textual) provided with the package.
- * 
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions
- * are met:
- * 1. Redistributions of source code must retain the copyright
- *    notice, this list of conditions and the following disclaimer.
- * 2. Redistributions in binary form must reproduce the above copyright
- *    notice, this list of conditions and the following disclaimer in the
- *    documentation and/or other materials provided with the distribution.
- * 3. All advertising materials mentioning features or use of this software
- *    must display the following acknowledgement:
- *    "This product includes cryptographic software written by
- *     Eric Young (eay@cryptsoft.com)"
- *    The word 'cryptographic' can be left out if the rouines from the library
- *    being used are not cryptographic related :-).
- * 4. If you include any Windows specific code (or a derivative thereof) from 
- *    the apps directory (application code) you must include an acknowledgement:
- *    "This product includes software written by Tim Hudson (tjh@cryptsoft.com)"
- * 
- * THIS SOFTWARE IS PROVIDED BY ERIC YOUNG ``AS IS'' AND
- * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
- * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
- * ARE DISCLAIMED.  IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE
- * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
- * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
- * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
- * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
- * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
- * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
- * SUCH DAMAGE.
- * 
- * The licence and distribution terms for any publically available version or
- * derivative of this code cannot be changed.  i.e. this code cannot simply be
- * copied and put under another distribution licence
- * [including the GNU Public Licence.]
- */
-
-#include <stdlib.h>
-
-#undef c2l
-#define c2l(c,l)	(l =((unsigned long)(*((c)++)))    , \
-			 l|=((unsigned long)(*((c)++)))<< 8L, \
-			 l|=((unsigned long)(*((c)++)))<<16L, \
-			 l|=((unsigned long)(*((c)++)))<<24L)
-
-/* NOTE - c is not incremented as per c2l */
-#undef c2ln
-#define c2ln(c,l1,l2,n)	{ \
-			c+=n; \
-			l1=l2=0; \
-			switch (n) { \
-			case 8: l2 =((unsigned long)(*(--(c))))<<24L; \
-			case 7: l2|=((unsigned long)(*(--(c))))<<16L; \
-			case 6: l2|=((unsigned long)(*(--(c))))<< 8L; \
-			case 5: l2|=((unsigned long)(*(--(c))));     \
-			case 4: l1 =((unsigned long)(*(--(c))))<<24L; \
-			case 3: l1|=((unsigned long)(*(--(c))))<<16L; \
-			case 2: l1|=((unsigned long)(*(--(c))))<< 8L; \
-			case 1: l1|=((unsigned long)(*(--(c))));     \
-				} \
-			}
-
-#undef l2c
-#define l2c(l,c)	(*((c)++)=(unsigned char)(((l)     )&0xff), \
-			 *((c)++)=(unsigned char)(((l)>> 8L)&0xff), \
-			 *((c)++)=(unsigned char)(((l)>>16L)&0xff), \
-			 *((c)++)=(unsigned char)(((l)>>24L)&0xff))
-
-/* NOTE - c is not incremented as per l2c */
-#undef l2cn
-#define l2cn(l1,l2,c,n)	{ \
-			c+=n; \
-			switch (n) { \
-			case 8: *(--(c))=(unsigned char)(((l2)>>24L)&0xff); \
-			case 7: *(--(c))=(unsigned char)(((l2)>>16L)&0xff); \
-			case 6: *(--(c))=(unsigned char)(((l2)>> 8L)&0xff); \
-			case 5: *(--(c))=(unsigned char)(((l2)     )&0xff); \
-			case 4: *(--(c))=(unsigned char)(((l1)>>24L)&0xff); \
-			case 3: *(--(c))=(unsigned char)(((l1)>>16L)&0xff); \
-			case 2: *(--(c))=(unsigned char)(((l1)>> 8L)&0xff); \
-			case 1: *(--(c))=(unsigned char)(((l1)     )&0xff); \
-				} \
-			}
-
-/* NOTE - c is not incremented as per n2l */
-#define n2ln(c,l1,l2,n)	{ \
-			c+=n; \
-			l1=l2=0; \
-			switch (n) { \
-			case 8: l2 =((unsigned long)(*(--(c))))    ; \
-			case 7: l2|=((unsigned long)(*(--(c))))<< 8; \
-			case 6: l2|=((unsigned long)(*(--(c))))<<16; \
-			case 5: l2|=((unsigned long)(*(--(c))))<<24; \
-			case 4: l1 =((unsigned long)(*(--(c))))    ; \
-			case 3: l1|=((unsigned long)(*(--(c))))<< 8; \
-			case 2: l1|=((unsigned long)(*(--(c))))<<16; \
-			case 1: l1|=((unsigned long)(*(--(c))))<<24; \
-				} \
-			}
-
-/* NOTE - c is not incremented as per l2n */
-#define l2nn(l1,l2,c,n)	{ \
-			c+=n; \
-			switch (n) { \
-			case 8: *(--(c))=(unsigned char)(((l2)    )&0xff); \
-			case 7: *(--(c))=(unsigned char)(((l2)>> 8)&0xff); \
-			case 6: *(--(c))=(unsigned char)(((l2)>>16)&0xff); \
-			case 5: *(--(c))=(unsigned char)(((l2)>>24)&0xff); \
-			case 4: *(--(c))=(unsigned char)(((l1)    )&0xff); \
-			case 3: *(--(c))=(unsigned char)(((l1)>> 8)&0xff); \
-			case 2: *(--(c))=(unsigned char)(((l1)>>16)&0xff); \
-			case 1: *(--(c))=(unsigned char)(((l1)>>24)&0xff); \
-				} \
-			}
-
-#undef n2l
-#define n2l(c,l)        (l =((unsigned long)(*((c)++)))<<24L, \
-                         l|=((unsigned long)(*((c)++)))<<16L, \
-                         l|=((unsigned long)(*((c)++)))<< 8L, \
-                         l|=((unsigned long)(*((c)++))))
-
-#undef l2n
-#define l2n(l,c)        (*((c)++)=(unsigned char)(((l)>>24L)&0xff), \
-                         *((c)++)=(unsigned char)(((l)>>16L)&0xff), \
-                         *((c)++)=(unsigned char)(((l)>> 8L)&0xff), \
-                         *((c)++)=(unsigned char)(((l)     )&0xff))
-
-#if (defined(OPENSSL_SYS_WIN32) && defined(_MSC_VER)) || defined(__ICC)
-#define ROTATE_l32(a,n)     _lrotl(a,n)
-#define ROTATE_r32(a,n)     _lrotr(a,n)
-#elif defined(__GNUC__) && __GNUC__>=2 && !defined(__STRICT_ANSI__) && !defined(OPENSSL_NO_ASM) && !defined(OPENSSL_NO_INLINE_ASM) && !defined(PEDANTIC)
-# if defined(__i386) || defined(__i386__) || defined(__x86_64) || defined(__x86_64__)
-#  define ROTATE_l32(a,n)	({ register unsigned int ret;	\
-					asm ("roll %%cl,%0"	\
-						: "=r"(ret)	\
-						: "c"(n),"0"(a)	\
-						: "cc");	\
-					ret;			\
-				})
-#  define ROTATE_r32(a,n)	({ register unsigned int ret;	\
-					asm ("rorl %%cl,%0"	\
-						: "=r"(ret)	\
-						: "c"(n),"0"(a)	\
-						: "cc");	\
-					ret;			\
-				})
-# endif
-#endif
-#ifndef ROTATE_l32
-#define ROTATE_l32(a,n)     (((a)<<(n&0x1f))|(((a)&0xffffffff)>>(32-(n&0x1f))))
-#endif
-#ifndef ROTATE_r32
-#define ROTATE_r32(a,n)     (((a)<<(32-(n&0x1f)))|(((a)&0xffffffff)>>(n&0x1f)))
-#endif
-
-#define RC5_32_MASK	0xffffffffL
-
-#define RC5_16_P	0xB7E1
-#define RC5_16_Q	0x9E37
-#define RC5_32_P	0xB7E15163L
-#define RC5_32_Q	0x9E3779B9L
-#define RC5_64_P	0xB7E151628AED2A6BLL
-#define RC5_64_Q	0x9E3779B97F4A7C15LL
-
-#define E_RC5_32(a,b,s,n) \
-	a^=b; \
-	a=ROTATE_l32(a,b); \
-	a+=s[n]; \
-	a&=RC5_32_MASK; \
-	b^=a; \
-	b=ROTATE_l32(b,a); \
-	b+=s[n+1]; \
-	b&=RC5_32_MASK;
-
-#define D_RC5_32(a,b,s,n) \
-	b-=s[n+1]; \
-	b&=RC5_32_MASK; \
-	b=ROTATE_r32(b,a); \
-	b^=a; \
-	a-=s[n]; \
-	a&=RC5_32_MASK; \
-	a=ROTATE_r32(a,b); \
-	a^=b;
-
-
-
diff --git a/crypto/openssl/crypto/rc5/rc5_skey.c b/crypto/openssl/crypto/rc5/rc5_skey.c
deleted file mode 100644
index a2e00a41c550..000000000000
--- a/crypto/openssl/crypto/rc5/rc5_skey.c
+++ /dev/null
@@ -1,113 +0,0 @@
-/* crypto/rc5/rc5_skey.c */
-/* Copyright (C) 1995-1998 Eric Young (eay@cryptsoft.com)
- * All rights reserved.
- *
- * This package is an SSL implementation written
- * by Eric Young (eay@cryptsoft.com).
- * The implementation was written so as to conform with Netscapes SSL.
- * 
- * This library is free for commercial and non-commercial use as long as
- * the following conditions are aheared to.  The following conditions
- * apply to all code found in this distribution, be it the RC4, RSA,
- * lhash, DES, etc., code; not just the SSL code.  The SSL documentation
- * included with this distribution is covered by the same copyright terms
- * except that the holder is Tim Hudson (tjh@cryptsoft.com).
- * 
- * Copyright remains Eric Young's, and as such any Copyright notices in
- * the code are not to be removed.
- * If this package is used in a product, Eric Young should be given attribution
- * as the author of the parts of the library used.
- * This can be in the form of a textual message at program startup or
- * in documentation (online or textual) provided with the package.
- * 
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions
- * are met:
- * 1. Redistributions of source code must retain the copyright
- *    notice, this list of conditions and the following disclaimer.
- * 2. Redistributions in binary form must reproduce the above copyright
- *    notice, this list of conditions and the following disclaimer in the
- *    documentation and/or other materials provided with the distribution.
- * 3. All advertising materials mentioning features or use of this software
- *    must display the following acknowledgement:
- *    "This product includes cryptographic software written by
- *     Eric Young (eay@cryptsoft.com)"
- *    The word 'cryptographic' can be left out if the rouines from the library
- *    being used are not cryptographic related :-).
- * 4. If you include any Windows specific code (or a derivative thereof) from 
- *    the apps directory (application code) you must include an acknowledgement:
- *    "This product includes software written by Tim Hudson (tjh@cryptsoft.com)"
- * 
- * THIS SOFTWARE IS PROVIDED BY ERIC YOUNG ``AS IS'' AND
- * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
- * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
- * ARE DISCLAIMED.  IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE
- * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
- * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
- * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
- * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
- * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
- * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
- * SUCH DAMAGE.
- * 
- * The licence and distribution terms for any publically available version or
- * derivative of this code cannot be changed.  i.e. this code cannot simply be
- * copied and put under another distribution licence
- * [including the GNU Public Licence.]
- */
-
-#include <openssl/rc5.h>
-#include "rc5_locl.h"
-
-void RC5_32_set_key(RC5_32_KEY *key, int len, const unsigned char *data,
-		    int rounds)
-	{
-	RC5_32_INT L[64],l,ll,A,B,*S,k;
-	int i,j,m,c,t,ii,jj;
-
-	if (	(rounds != RC5_16_ROUNDS) &&
-		(rounds != RC5_12_ROUNDS) &&
-		(rounds != RC5_8_ROUNDS))
-		rounds=RC5_16_ROUNDS;
-
-	key->rounds=rounds;
-	S= &(key->data[0]);
-	j=0;
-	for (i=0; i<=(len-8); i+=8)
-		{
-		c2l(data,l);
-		L[j++]=l;
-		c2l(data,l);
-		L[j++]=l;
-		}
-	ii=len-i;
-	if (ii)
-		{
-		k=len&0x07;
-		c2ln(data,l,ll,k);
-		L[j+0]=l;
-		L[j+1]=ll;
-		}
-
-	c=(len+3)/4;
-	t=(rounds+1)*2;
-	S[0]=RC5_32_P;
-	for (i=1; i<t; i++)
-		S[i]=(S[i-1]+RC5_32_Q)&RC5_32_MASK;
-
-	j=(t>c)?t:c;
-	j*=3;
-	ii=jj=0;
-	A=B=0;
-	for (i=0; i<j; i++)
-		{
-		k=(S[ii]+A+B)&RC5_32_MASK;
-		A=S[ii]=ROTATE_l32(k,3);
-		m=(int)(A+B);
-		k=(L[jj]+A+B)&RC5_32_MASK;
-		B=L[jj]=ROTATE_l32(k,m);
-		if (++ii >= t) ii=0;
-		if (++jj >= c) jj=0;
-		}
-	}
-
diff --git a/crypto/openssl/crypto/rc5/rc5cfb64.c b/crypto/openssl/crypto/rc5/rc5cfb64.c
deleted file mode 100644
index 3a8b60bc7a87..000000000000
--- a/crypto/openssl/crypto/rc5/rc5cfb64.c
+++ /dev/null
@@ -1,122 +0,0 @@
-/* crypto/rc5/rc5cfb64.c */
-/* Copyright (C) 1995-1998 Eric Young (eay@cryptsoft.com)
- * All rights reserved.
- *
- * This package is an SSL implementation written
- * by Eric Young (eay@cryptsoft.com).
- * The implementation was written so as to conform with Netscapes SSL.
- * 
- * This library is free for commercial and non-commercial use as long as
- * the following conditions are aheared to.  The following conditions
- * apply to all code found in this distribution, be it the RC4, RSA,
- * lhash, DES, etc., code; not just the SSL code.  The SSL documentation
- * included with this distribution is covered by the same copyright terms
- * except that the holder is Tim Hudson (tjh@cryptsoft.com).
- * 
- * Copyright remains Eric Young's, and as such any Copyright notices in
- * the code are not to be removed.
- * If this package is used in a product, Eric Young should be given attribution
- * as the author of the parts of the library used.
- * This can be in the form of a textual message at program startup or
- * in documentation (online or textual) provided with the package.
- * 
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions
- * are met:
- * 1. Redistributions of source code must retain the copyright
- *    notice, this list of conditions and the following disclaimer.
- * 2. Redistributions in binary form must reproduce the above copyright
- *    notice, this list of conditions and the following disclaimer in the
- *    documentation and/or other materials provided with the distribution.
- * 3. All advertising materials mentioning features or use of this software
- *    must display the following acknowledgement:
- *    "This product includes cryptographic software written by
- *     Eric Young (eay@cryptsoft.com)"
- *    The word 'cryptographic' can be left out if the rouines from the library
- *    being used are not cryptographic related :-).
- * 4. If you include any Windows specific code (or a derivative thereof) from 
- *    the apps directory (application code) you must include an acknowledgement:
- *    "This product includes software written by Tim Hudson (tjh@cryptsoft.com)"
- * 
- * THIS SOFTWARE IS PROVIDED BY ERIC YOUNG ``AS IS'' AND
- * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
- * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
- * ARE DISCLAIMED.  IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE
- * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
- * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
- * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
- * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
- * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
- * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
- * SUCH DAMAGE.
- * 
- * The licence and distribution terms for any publically available version or
- * derivative of this code cannot be changed.  i.e. this code cannot simply be
- * copied and put under another distribution licence
- * [including the GNU Public Licence.]
- */
-
-#include <openssl/rc5.h>
-#include "rc5_locl.h"
-
-/* The input and output encrypted as though 64bit cfb mode is being
- * used.  The extra state information to record how much of the
- * 64bit block we have used is contained in *num;
- */
-
-void RC5_32_cfb64_encrypt(const unsigned char *in, unsigned char *out,
-			  long length, RC5_32_KEY *schedule,
-			  unsigned char *ivec, int *num, int encrypt)
-	{
-	register unsigned long v0,v1,t;
-	register int n= *num;
-	register long l=length;
-	unsigned long ti[2];
-	unsigned char *iv,c,cc;
-
-	iv=(unsigned char *)ivec;
-	if (encrypt)
-		{
-		while (l--)
-			{
-			if (n == 0)
-				{
-				c2l(iv,v0); ti[0]=v0;
-				c2l(iv,v1); ti[1]=v1;
-				RC5_32_encrypt((unsigned long *)ti,schedule);
-				iv=(unsigned char *)ivec;
-				t=ti[0]; l2c(t,iv);
-				t=ti[1]; l2c(t,iv);
-				iv=(unsigned char *)ivec;
-				}
-			c= *(in++)^iv[n];
-			*(out++)=c;
-			iv[n]=c;
-			n=(n+1)&0x07;
-			}
-		}
-	else
-		{
-		while (l--)
-			{
-			if (n == 0)
-				{
-				c2l(iv,v0); ti[0]=v0;
-				c2l(iv,v1); ti[1]=v1;
-				RC5_32_encrypt((unsigned long *)ti,schedule);
-				iv=(unsigned char *)ivec;
-				t=ti[0]; l2c(t,iv);
-				t=ti[1]; l2c(t,iv);
-				iv=(unsigned char *)ivec;
-				}
-			cc= *(in++);
-			c=iv[n];
-			iv[n]=cc;
-			*(out++)=c^cc;
-			n=(n+1)&0x07;
-			}
-		}
-	v0=v1=ti[0]=ti[1]=t=c=cc=0;
-	*num=n;
-	}
-
diff --git a/crypto/openssl/crypto/rc5/rc5ofb64.c b/crypto/openssl/crypto/rc5/rc5ofb64.c
deleted file mode 100644
index d412215f3c33..000000000000
--- a/crypto/openssl/crypto/rc5/rc5ofb64.c
+++ /dev/null
@@ -1,111 +0,0 @@
-/* crypto/rc5/rc5ofb64.c */
-/* Copyright (C) 1995-1998 Eric Young (eay@cryptsoft.com)
- * All rights reserved.
- *
- * This package is an SSL implementation written
- * by Eric Young (eay@cryptsoft.com).
- * The implementation was written so as to conform with Netscapes SSL.
- * 
- * This library is free for commercial and non-commercial use as long as
- * the following conditions are aheared to.  The following conditions
- * apply to all code found in this distribution, be it the RC4, RSA,
- * lhash, DES, etc., code; not just the SSL code.  The SSL documentation
- * included with this distribution is covered by the same copyright terms
- * except that the holder is Tim Hudson (tjh@cryptsoft.com).
- * 
- * Copyright remains Eric Young's, and as such any Copyright notices in
- * the code are not to be removed.
- * If this package is used in a product, Eric Young should be given attribution
- * as the author of the parts of the library used.
- * This can be in the form of a textual message at program startup or
- * in documentation (online or textual) provided with the package.
- * 
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions
- * are met:
- * 1. Redistributions of source code must retain the copyright
- *    notice, this list of conditions and the following disclaimer.
- * 2. Redistributions in binary form must reproduce the above copyright
- *    notice, this list of conditions and the following disclaimer in the
- *    documentation and/or other materials provided with the distribution.
- * 3. All advertising materials mentioning features or use of this software
- *    must display the following acknowledgement:
- *    "This product includes cryptographic software written by
- *     Eric Young (eay@cryptsoft.com)"
- *    The word 'cryptographic' can be left out if the rouines from the library
- *    being used are not cryptographic related :-).
- * 4. If you include any Windows specific code (or a derivative thereof) from 
- *    the apps directory (application code) you must include an acknowledgement:
- *    "This product includes software written by Tim Hudson (tjh@cryptsoft.com)"
- * 
- * THIS SOFTWARE IS PROVIDED BY ERIC YOUNG ``AS IS'' AND
- * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
- * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
- * ARE DISCLAIMED.  IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE
- * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
- * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
- * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
- * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
- * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
- * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
- * SUCH DAMAGE.
- * 
- * The licence and distribution terms for any publically available version or
- * derivative of this code cannot be changed.  i.e. this code cannot simply be
- * copied and put under another distribution licence
- * [including the GNU Public Licence.]
- */
-
-#include <openssl/rc5.h>
-#include "rc5_locl.h"
-
-/* The input and output encrypted as though 64bit ofb mode is being
- * used.  The extra state information to record how much of the
- * 64bit block we have used is contained in *num;
- */
-void RC5_32_ofb64_encrypt(const unsigned char *in, unsigned char *out,
-			  long length, RC5_32_KEY *schedule,
-			  unsigned char *ivec, int *num)
-	{
-	register unsigned long v0,v1,t;
-	register int n= *num;
-	register long l=length;
-	unsigned char d[8];
-	register char *dp;
-	unsigned long ti[2];
-	unsigned char *iv;
-	int save=0;
-
-	iv=(unsigned char *)ivec;
-	c2l(iv,v0);
-	c2l(iv,v1);
-	ti[0]=v0;
-	ti[1]=v1;
-	dp=(char *)d;
-	l2c(v0,dp);
-	l2c(v1,dp);
-	while (l--)
-		{
-		if (n == 0)
-			{
-			RC5_32_encrypt((unsigned long *)ti,schedule);
-			dp=(char *)d;
-			t=ti[0]; l2c(t,dp);
-			t=ti[1]; l2c(t,dp);
-			save++;
-			}
-		*(out++)= *(in++)^d[n];
-		n=(n+1)&0x07;
-		}
-	if (save)
-		{
-		v0=ti[0];
-		v1=ti[1];
-		iv=(unsigned char *)ivec;
-		l2c(v0,iv);
-		l2c(v1,iv);
-		}
-	t=v0=v1=ti[0]=ti[1]=0;
-	*num=n;
-	}
-
diff --git a/crypto/openssl/crypto/rc5/rc5s.cpp b/crypto/openssl/crypto/rc5/rc5s.cpp
deleted file mode 100644
index 1c5518bc8045..000000000000
--- a/crypto/openssl/crypto/rc5/rc5s.cpp
+++ /dev/null
@@ -1,70 +0,0 @@
-//
-// gettsc.inl
-//
-// gives access to the Pentium's (secret) cycle counter
-//
-// This software was written by Leonard Janke (janke@unixg.ubc.ca)
-// in 1996-7 and is entered, by him, into the public domain.
-
-#if defined(__WATCOMC__)
-void GetTSC(unsigned long&);
-#pragma aux GetTSC = 0x0f 0x31 "mov [edi], eax" parm [edi] modify [edx eax];
-#elif defined(__GNUC__)
-inline
-void GetTSC(unsigned long& tsc)
-{
-  asm volatile(".byte 15, 49\n\t"
-	       : "=eax" (tsc)
-	       :
-	       : "%edx", "%eax");
-}
-#elif defined(_MSC_VER)
-inline
-void GetTSC(unsigned long& tsc)
-{
-  unsigned long a;
-  __asm _emit 0fh
-  __asm _emit 31h
-  __asm mov a, eax;
-  tsc=a;
-}
-#endif      
-
-#include <stdio.h>
-#include <stdlib.h>
-#include <openssl/rc5.h>
-
-void main(int argc,char *argv[])
-	{
-	RC5_32_KEY key;
-	unsigned long s1,s2,e1,e2;
-	unsigned long data[2];
-	int i,j;
-	static unsigned char d[16]={0x01,0x23,0x45,0x67,0x89,0xAB,0xCD,0xEF};
-
-	RC5_32_set_key(&key, 16,d,12);
-
-	for (j=0; j<6; j++)
-		{
-		for (i=0; i<1000; i++) /**/
-			{
-			RC5_32_encrypt(&data[0],&key);
-			GetTSC(s1);
-			RC5_32_encrypt(&data[0],&key);
-			RC5_32_encrypt(&data[0],&key);
-			RC5_32_encrypt(&data[0],&key);
-			GetTSC(e1);
-			GetTSC(s2);
-			RC5_32_encrypt(&data[0],&key);
-			RC5_32_encrypt(&data[0],&key);
-			RC5_32_encrypt(&data[0],&key);
-			RC5_32_encrypt(&data[0],&key);
-			GetTSC(e2);
-			RC5_32_encrypt(&data[0],&key);
-			}
-
-		printf("cast %d %d (%d)\n",
-			e1-s1,e2-s2,((e2-s2)-(e1-s1)));
-		}
-	}
-
diff --git a/crypto/openssl/crypto/rc5/rc5speed.c b/crypto/openssl/crypto/rc5/rc5speed.c
deleted file mode 100644
index 8e363be535b4..000000000000
--- a/crypto/openssl/crypto/rc5/rc5speed.c
+++ /dev/null
@@ -1,277 +0,0 @@
-/* crypto/rc5/rc5speed.c */
-/* Copyright (C) 1995-1998 Eric Young (eay@cryptsoft.com)
- * All rights reserved.
- *
- * This package is an SSL implementation written
- * by Eric Young (eay@cryptsoft.com).
- * The implementation was written so as to conform with Netscapes SSL.
- * 
- * This library is free for commercial and non-commercial use as long as
- * the following conditions are aheared to.  The following conditions
- * apply to all code found in this distribution, be it the RC4, RSA,
- * lhash, DES, etc., code; not just the SSL code.  The SSL documentation
- * included with this distribution is covered by the same copyright terms
- * except that the holder is Tim Hudson (tjh@cryptsoft.com).
- * 
- * Copyright remains Eric Young's, and as such any Copyright notices in
- * the code are not to be removed.
- * If this package is used in a product, Eric Young should be given attribution
- * as the author of the parts of the library used.
- * This can be in the form of a textual message at program startup or
- * in documentation (online or textual) provided with the package.
- * 
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions
- * are met:
- * 1. Redistributions of source code must retain the copyright
- *    notice, this list of conditions and the following disclaimer.
- * 2. Redistributions in binary form must reproduce the above copyright
- *    notice, this list of conditions and the following disclaimer in the
- *    documentation and/or other materials provided with the distribution.
- * 3. All advertising materials mentioning features or use of this software
- *    must display the following acknowledgement:
- *    "This product includes cryptographic software written by
- *     Eric Young (eay@cryptsoft.com)"
- *    The word 'cryptographic' can be left out if the rouines from the library
- *    being used are not cryptographic related :-).
- * 4. If you include any Windows specific code (or a derivative thereof) from 
- *    the apps directory (application code) you must include an acknowledgement:
- *    "This product includes software written by Tim Hudson (tjh@cryptsoft.com)"
- * 
- * THIS SOFTWARE IS PROVIDED BY ERIC YOUNG ``AS IS'' AND
- * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
- * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
- * ARE DISCLAIMED.  IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE
- * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
- * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
- * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
- * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
- * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
- * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
- * SUCH DAMAGE.
- * 
- * The licence and distribution terms for any publically available version or
- * derivative of this code cannot be changed.  i.e. this code cannot simply be
- * copied and put under another distribution licence
- * [including the GNU Public Licence.]
- */
-
-/* 11-Sep-92 Andrew Daviel   Support for Silicon Graphics IRIX added */
-/* 06-Apr-92 Luke Brennan    Support for VMS and add extra signal calls */
-
-#if !defined(OPENSSL_SYS_MSDOS) && (!defined(OPENSSL_SYS_VMS) || defined(__DECC)) && !defined(OPENSSL_SYS_MACOSX)
-#define TIMES
-#endif
-
-#include <stdio.h>
-
-#include <openssl/e_os2.h>
-#include OPENSSL_UNISTD_IO
-OPENSSL_DECLARE_EXIT
-
-#ifndef OPENSSL_SYS_NETWARE
-#include <signal.h>
-#endif
-
-#ifndef _IRIX
-#include <time.h>
-#endif
-#ifdef TIMES
-#include <sys/types.h>
-#include <sys/times.h>
-#endif
-
-/* Depending on the VMS version, the tms structure is perhaps defined.
-   The __TMS macro will show if it was.  If it wasn't defined, we should
-   undefine TIMES, since that tells the rest of the program how things
-   should be handled.				-- Richard Levitte */
-#if defined(OPENSSL_SYS_VMS_DECC) && !defined(__TMS)
-#undef TIMES
-#endif
-
-#ifndef TIMES
-#include <sys/timeb.h>
-#endif
-
-#if defined(sun) || defined(__ultrix)
-#define _POSIX_SOURCE
-#include <limits.h>
-#include <sys/param.h>
-#endif
-
-#include <openssl/rc5.h>
-
-/* The following if from times(3) man page.  It may need to be changed */
-#ifndef HZ
-#ifndef CLK_TCK
-#define HZ	100.0
-#else /* CLK_TCK */
-#define HZ ((double)CLK_TCK)
-#endif
-#endif
-
-#define BUFSIZE	((long)1024)
-long run=0;
-
-double Time_F(int s);
-#ifdef SIGALRM
-#if defined(__STDC__) || defined(sgi) || defined(_AIX)
-#define SIGRETTYPE void
-#else
-#define SIGRETTYPE int
-#endif
-
-SIGRETTYPE sig_done(int sig);
-SIGRETTYPE sig_done(int sig)
-	{
-	signal(SIGALRM,sig_done);
-	run=0;
-#ifdef LINT
-	sig=sig;
-#endif
-	}
-#endif
-
-#define START	0
-#define STOP	1
-
-double Time_F(int s)
-	{
-	double ret;
-#ifdef TIMES
-	static struct tms tstart,tend;
-
-	if (s == START)
-		{
-		times(&tstart);
-		return(0);
-		}
-	else
-		{
-		times(&tend);
-		ret=((double)(tend.tms_utime-tstart.tms_utime))/HZ;
-		return((ret == 0.0)?1e-6:ret);
-		}
-#else /* !times() */
-	static struct timeb tstart,tend;
-	long i;
-
-	if (s == START)
-		{
-		ftime(&tstart);
-		return(0);
-		}
-	else
-		{
-		ftime(&tend);
-		i=(long)tend.millitm-(long)tstart.millitm;
-		ret=((double)(tend.time-tstart.time))+((double)i)/1e3;
-		return((ret == 0.0)?1e-6:ret);
-		}
-#endif
-	}
-
-int main(int argc, char **argv)
-	{
-	long count;
-	static unsigned char buf[BUFSIZE];
-	static unsigned char key[] ={
-			0x12,0x34,0x56,0x78,0x9a,0xbc,0xde,0xf0,
-			0xfe,0xdc,0xba,0x98,0x76,0x54,0x32,0x10,
-			};
-	RC5_32_KEY sch;
-	double a,b,c,d;
-#ifndef SIGALRM
-	long ca,cb,cc;
-#endif
-
-#ifndef TIMES
-	printf("To get the most accurate results, try to run this\n");
-	printf("program when this computer is idle.\n");
-#endif
-
-#ifndef SIGALRM
-	printf("First we calculate the approximate speed ...\n");
-	RC5_32_set_key(&sch,16,key,12);
-	count=10;
-	do	{
-		long i;
-		unsigned long data[2];
-
-		count*=2;
-		Time_F(START);
-		for (i=count; i; i--)
-			RC5_32_encrypt(data,&sch);
-		d=Time_F(STOP);
-		} while (d < 3.0);
-	ca=count/512;
-	cb=count;
-	cc=count*8/BUFSIZE+1;
-	printf("Doing RC5_32_set_key %ld times\n",ca);
-#define COND(d)	(count != (d))
-#define COUNT(d) (d)
-#else
-#define COND(c)	(run)
-#define COUNT(d) (count)
-	signal(SIGALRM,sig_done);
-	printf("Doing RC5_32_set_key for 10 seconds\n");
-	alarm(10);
-#endif
-
-	Time_F(START);
-	for (count=0,run=1; COND(ca); count+=4)
-		{
-		RC5_32_set_key(&sch,16,key,12);
-		RC5_32_set_key(&sch,16,key,12);
-		RC5_32_set_key(&sch,16,key,12);
-		RC5_32_set_key(&sch,16,key,12);
-		}
-	d=Time_F(STOP);
-	printf("%ld RC5_32_set_key's in %.2f seconds\n",count,d);
-	a=((double)COUNT(ca))/d;
-
-#ifdef SIGALRM
-	printf("Doing RC5_32_encrypt's for 10 seconds\n");
-	alarm(10);
-#else
-	printf("Doing RC5_32_encrypt %ld times\n",cb);
-#endif
-	Time_F(START);
-	for (count=0,run=1; COND(cb); count+=4)
-		{
-		unsigned long data[2];
-
-		RC5_32_encrypt(data,&sch);
-		RC5_32_encrypt(data,&sch);
-		RC5_32_encrypt(data,&sch);
-		RC5_32_encrypt(data,&sch);
-		}
-	d=Time_F(STOP);
-	printf("%ld RC5_32_encrypt's in %.2f second\n",count,d);
-	b=((double)COUNT(cb)*8)/d;
-
-#ifdef SIGALRM
-	printf("Doing RC5_32_cbc_encrypt on %ld byte blocks for 10 seconds\n",
-		BUFSIZE);
-	alarm(10);
-#else
-	printf("Doing RC5_32_cbc_encrypt %ld times on %ld byte blocks\n",cc,
-		BUFSIZE);
-#endif
-	Time_F(START);
-	for (count=0,run=1; COND(cc); count++)
-		RC5_32_cbc_encrypt(buf,buf,BUFSIZE,&sch,
-			&(key[0]),RC5_ENCRYPT);
-	d=Time_F(STOP);
-	printf("%ld RC5_32_cbc_encrypt's of %ld byte blocks in %.2f second\n",
-		count,BUFSIZE,d);
-	c=((double)COUNT(cc)*BUFSIZE)/d;
-
-	printf("RC5_32/12/16 set_key       per sec = %12.2f (%9.3fuS)\n",a,1.0e6/a);
-	printf("RC5_32/12/16 raw ecb bytes per sec = %12.2f (%9.3fuS)\n",b,8.0e6/b);
-	printf("RC5_32/12/16 cbc     bytes per sec = %12.2f (%9.3fuS)\n",c,8.0e6/c);
-	exit(0);
-#if defined(LINT) || defined(OPENSSL_SYS_MSDOS)
-	return(0);
-#endif
-	}
diff --git a/crypto/openssl/crypto/rc5/rc5test.c b/crypto/openssl/crypto/rc5/rc5test.c
deleted file mode 100644
index ce3d0cc16f32..000000000000
--- a/crypto/openssl/crypto/rc5/rc5test.c
+++ /dev/null
@@ -1,386 +0,0 @@
-/* crypto/rc5/rc5test.c */
-/* Copyright (C) 1995-1998 Eric Young (eay@cryptsoft.com)
- * All rights reserved.
- *
- * This package is an SSL implementation written
- * by Eric Young (eay@cryptsoft.com).
- * The implementation was written so as to conform with Netscapes SSL.
- * 
- * This library is free for commercial and non-commercial use as long as
- * the following conditions are aheared to.  The following conditions
- * apply to all code found in this distribution, be it the RC4, RSA,
- * lhash, DES, etc., code; not just the SSL code.  The SSL documentation
- * included with this distribution is covered by the same copyright terms
- * except that the holder is Tim Hudson (tjh@cryptsoft.com).
- * 
- * Copyright remains Eric Young's, and as such any Copyright notices in
- * the code are not to be removed.
- * If this package is used in a product, Eric Young should be given attribution
- * as the author of the parts of the library used.
- * This can be in the form of a textual message at program startup or
- * in documentation (online or textual) provided with the package.
- * 
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions
- * are met:
- * 1. Redistributions of source code must retain the copyright
- *    notice, this list of conditions and the following disclaimer.
- * 2. Redistributions in binary form must reproduce the above copyright
- *    notice, this list of conditions and the following disclaimer in the
- *    documentation and/or other materials provided with the distribution.
- * 3. All advertising materials mentioning features or use of this software
- *    must display the following acknowledgement:
- *    "This product includes cryptographic software written by
- *     Eric Young (eay@cryptsoft.com)"
- *    The word 'cryptographic' can be left out if the rouines from the library
- *    being used are not cryptographic related :-).
- * 4. If you include any Windows specific code (or a derivative thereof) from 
- *    the apps directory (application code) you must include an acknowledgement:
- *    "This product includes software written by Tim Hudson (tjh@cryptsoft.com)"
- * 
- * THIS SOFTWARE IS PROVIDED BY ERIC YOUNG ``AS IS'' AND
- * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
- * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
- * ARE DISCLAIMED.  IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE
- * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
- * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
- * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
- * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
- * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
- * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
- * SUCH DAMAGE.
- * 
- * The licence and distribution terms for any publically available version or
- * derivative of this code cannot be changed.  i.e. this code cannot simply be
- * copied and put under another distribution licence
- * [including the GNU Public Licence.]
- */
-
-/* This has been a quickly hacked 'ideatest.c'.  When I add tests for other
- * RC5 modes, more of the code will be uncommented. */
-
-#include <stdio.h>
-#include <string.h>
-#include <stdlib.h>
-
-#include "../e_os.h"
-
-#ifdef OPENSSL_NO_RC5
-int main(int argc, char *argv[])
-{
-    printf("No RC5 support\n");
-    return(0);
-}
-#else
-#include <openssl/rc5.h>
-
-static unsigned char RC5key[5][16]={
-	{0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
-	 0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00},
-	{0x91,0x5f,0x46,0x19,0xbe,0x41,0xb2,0x51,
-	 0x63,0x55,0xa5,0x01,0x10,0xa9,0xce,0x91},
-	{0x78,0x33,0x48,0xe7,0x5a,0xeb,0x0f,0x2f,
-	 0xd7,0xb1,0x69,0xbb,0x8d,0xc1,0x67,0x87},
-	{0xdc,0x49,0xdb,0x13,0x75,0xa5,0x58,0x4f,
-	 0x64,0x85,0xb4,0x13,0xb5,0xf1,0x2b,0xaf},
-	{0x52,0x69,0xf1,0x49,0xd4,0x1b,0xa0,0x15,
-	 0x24,0x97,0x57,0x4d,0x7f,0x15,0x31,0x25},
-	};
-
-static unsigned char RC5plain[5][8]={
-	{0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00},
-	{0x21,0xA5,0xDB,0xEE,0x15,0x4B,0x8F,0x6D},
-	{0xF7,0xC0,0x13,0xAC,0x5B,0x2B,0x89,0x52},
-	{0x2F,0x42,0xB3,0xB7,0x03,0x69,0xFC,0x92},
-	{0x65,0xC1,0x78,0xB2,0x84,0xD1,0x97,0xCC},
-	};
-
-static unsigned char RC5cipher[5][8]={
-	{0x21,0xA5,0xDB,0xEE,0x15,0x4B,0x8F,0x6D},
-	{0xF7,0xC0,0x13,0xAC,0x5B,0x2B,0x89,0x52},
-	{0x2F,0x42,0xB3,0xB7,0x03,0x69,0xFC,0x92},
-	{0x65,0xC1,0x78,0xB2,0x84,0xD1,0x97,0xCC},
-	{0xEB,0x44,0xE4,0x15,0xDA,0x31,0x98,0x24},
-	};
-
-#define RC5_CBC_NUM 27
-static unsigned char rc5_cbc_cipher[RC5_CBC_NUM][8]={
-	{0x7a,0x7b,0xba,0x4d,0x79,0x11,0x1d,0x1e},
-	{0x79,0x7b,0xba,0x4d,0x78,0x11,0x1d,0x1e},
-	{0x7a,0x7b,0xba,0x4d,0x79,0x11,0x1d,0x1f},
-	{0x7a,0x7b,0xba,0x4d,0x79,0x11,0x1d,0x1f},
-	{0x8b,0x9d,0xed,0x91,0xce,0x77,0x94,0xa6},
-	{0x2f,0x75,0x9f,0xe7,0xad,0x86,0xa3,0x78},
-	{0xdc,0xa2,0x69,0x4b,0xf4,0x0e,0x07,0x88},
-	{0xdc,0xa2,0x69,0x4b,0xf4,0x0e,0x07,0x88},
-	{0xdc,0xfe,0x09,0x85,0x77,0xec,0xa5,0xff},
-	{0x96,0x46,0xfb,0x77,0x63,0x8f,0x9c,0xa8},
-	{0xb2,0xb3,0x20,0x9d,0xb6,0x59,0x4d,0xa4},
-	{0x54,0x5f,0x7f,0x32,0xa5,0xfc,0x38,0x36},
-	{0x82,0x85,0xe7,0xc1,0xb5,0xbc,0x74,0x02},
-	{0xfc,0x58,0x6f,0x92,0xf7,0x08,0x09,0x34},
-	{0xcf,0x27,0x0e,0xf9,0x71,0x7f,0xf7,0xc4},
-	{0xe4,0x93,0xf1,0xc1,0xbb,0x4d,0x6e,0x8c},
-	{0x5c,0x4c,0x04,0x1e,0x0f,0x21,0x7a,0xc3},
-	{0x92,0x1f,0x12,0x48,0x53,0x73,0xb4,0xf7},
-	{0x5b,0xa0,0xca,0x6b,0xbe,0x7f,0x5f,0xad},
-	{0xc5,0x33,0x77,0x1c,0xd0,0x11,0x0e,0x63},
-	{0x29,0x4d,0xdb,0x46,0xb3,0x27,0x8d,0x60},
-	{0xda,0xd6,0xbd,0xa9,0xdf,0xe8,0xf7,0xe8},
-	{0x97,0xe0,0x78,0x78,0x37,0xed,0x31,0x7f},
-	{0x78,0x75,0xdb,0xf6,0x73,0x8c,0x64,0x78},
-	{0x8f,0x34,0xc3,0xc6,0x81,0xc9,0x96,0x95},
-	{0x7c,0xb3,0xf1,0xdf,0x34,0xf9,0x48,0x11},
-	{0x7f,0xd1,0xa0,0x23,0xa5,0xbb,0xa2,0x17},
-	};
-
-static unsigned char rc5_cbc_key[RC5_CBC_NUM][17]={
-	{ 1,0x00},
-	{ 1,0x00},
-	{ 1,0x00},
-	{ 1,0x00},
-	{ 1,0x00},
-	{ 1,0x11},
-	{ 1,0x00},
-	{ 4,0x00,0x00,0x00,0x00},
-	{ 1,0x00},
-	{ 1,0x00},
-	{ 1,0x00},
-	{ 1,0x00},
-	{ 4,0x01,0x02,0x03,0x04},
-	{ 4,0x01,0x02,0x03,0x04},
-	{ 4,0x01,0x02,0x03,0x04},
-	{ 8,0x01,0x02,0x03,0x04,0x05,0x06,0x07,0x08},
-	{ 8,0x01,0x02,0x03,0x04,0x05,0x06,0x07,0x08},
-	{ 8,0x01,0x02,0x03,0x04,0x05,0x06,0x07,0x08},
-	{ 8,0x01,0x02,0x03,0x04,0x05,0x06,0x07,0x08},
-	{16,0x01,0x02,0x03,0x04,0x05,0x06,0x07,0x08,
-	    0x10,0x20,0x30,0x40,0x50,0x60,0x70,0x80},
-	{16,0x01,0x02,0x03,0x04,0x05,0x06,0x07,0x08,
-	    0x10,0x20,0x30,0x40,0x50,0x60,0x70,0x80},
-	{16,0x01,0x02,0x03,0x04,0x05,0x06,0x07,0x08,
-	    0x10,0x20,0x30,0x40,0x50,0x60,0x70,0x80},
-	{ 5,0x01,0x02,0x03,0x04,0x05},
-	{ 5,0x01,0x02,0x03,0x04,0x05},
-	{ 5,0x01,0x02,0x03,0x04,0x05},
-	{ 5,0x01,0x02,0x03,0x04,0x05},
-	{ 5,0x01,0x02,0x03,0x04,0x05},
-	};
-
-static unsigned char rc5_cbc_plain[RC5_CBC_NUM][8]={
-	{0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00},
-	{0xff,0xff,0xff,0xff,0xff,0xff,0xff,0xff},
-	{0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00},
-	{0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x01},
-	{0x10,0x20,0x30,0x40,0x50,0x60,0x70,0x80},
-	{0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00},
-	{0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00},
-	{0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00},
-	{0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00},
-	{0x10,0x20,0x30,0x40,0x50,0x60,0x70,0x80},
-	{0x10,0x20,0x30,0x40,0x50,0x60,0x70,0x80},
-	{0x10,0x20,0x30,0x40,0x50,0x60,0x70,0x80},
-	{0xff,0xff,0xff,0xff,0xff,0xff,0xff,0xff},
-	{0xff,0xff,0xff,0xff,0xff,0xff,0xff,0xff},
-	{0xff,0xff,0xff,0xff,0xff,0xff,0xff,0xff},
-	{0xff,0xff,0xff,0xff,0xff,0xff,0xff,0xff},
-	{0x10,0x20,0x30,0x40,0x50,0x60,0x70,0x80},
-	{0x10,0x20,0x30,0x40,0x50,0x60,0x70,0x80},
-	{0x10,0x20,0x30,0x40,0x50,0x60,0x70,0x80},
-	{0x10,0x20,0x30,0x40,0x50,0x60,0x70,0x80},
-	{0x10,0x20,0x30,0x40,0x50,0x60,0x70,0x80},
-	{0x10,0x20,0x30,0x40,0x50,0x60,0x70,0x80},
-	{0xff,0xff,0xff,0xff,0xff,0xff,0xff,0xff},
-	{0xff,0xff,0xff,0xff,0xff,0xff,0xff,0xff},
-	{0x08,0x08,0x08,0x08,0x08,0x08,0x08,0x08},
-	{0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00},
-	{0x11,0x22,0x33,0x44,0x55,0x66,0x77,0x01},
-	};
-
-static int rc5_cbc_rounds[RC5_CBC_NUM]={
-	 0, 0, 0, 0, 0, 1, 2, 2,
-	 8, 8,12,16, 8,12,16,12,
-	 8,12,16, 8,12,16,12, 8,
-	 8, 8, 8,
-	};
-
-static unsigned char rc5_cbc_iv[RC5_CBC_NUM][8]={
-	{0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00},
-	{0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00},
-	{0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x01},
-	{0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00},
-	{0x01,0x02,0x03,0x04,0x05,0x06,0x07,0x08},
-	{0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00},
-	{0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00},
-	{0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00},
-	{0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00},
-	{0x01,0x02,0x03,0x04,0x05,0x06,0x07,0x08},
-	{0x01,0x02,0x03,0x04,0x05,0x06,0x07,0x08},
-	{0x01,0x02,0x03,0x04,0x05,0x06,0x07,0x08},
-	{0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00},
-	{0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00},
-	{0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00},
-	{0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00},
-	{0x01,0x02,0x03,0x04,0x05,0x06,0x07,0x08},
-	{0x01,0x02,0x03,0x04,0x05,0x06,0x07,0x08},
-	{0x01,0x02,0x03,0x04,0x05,0x06,0x07,0x08},
-	{0x01,0x02,0x03,0x04,0x05,0x06,0x07,0x08},
-	{0x01,0x02,0x03,0x04,0x05,0x06,0x07,0x08},
-	{0x01,0x02,0x03,0x04,0x05,0x06,0x07,0x08},
-	{0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00},
-	{0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00},
-	{0x78,0x75,0xdb,0xf6,0x73,0x8c,0x64,0x78},
-	{0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00},
-	{0x7c,0xb3,0xf1,0xdf,0x34,0xf9,0x48,0x11},
-	};
-
-int main(int argc, char *argv[])
-	{
-	int i,n,err=0;
-	RC5_32_KEY key; 
-	unsigned char buf[8],buf2[8],ivb[8];
-
-	for (n=0; n<5; n++)
-		{
-		RC5_32_set_key(&key,16,&(RC5key[n][0]),12);
-
-		RC5_32_ecb_encrypt(&(RC5plain[n][0]),buf,&key,RC5_ENCRYPT);
-		if (memcmp(&(RC5cipher[n][0]),buf,8) != 0)
-			{
-			printf("ecb RC5 error encrypting (%d)\n",n+1);
-			printf("got     :");
-			for (i=0; i<8; i++)
-				printf("%02X ",buf[i]);
-			printf("\n");
-			printf("expected:");
-			for (i=0; i<8; i++)
-				printf("%02X ",RC5cipher[n][i]);
-			err=20;
-			printf("\n");
-			}
-
-		RC5_32_ecb_encrypt(buf,buf2,&key,RC5_DECRYPT);
-		if (memcmp(&(RC5plain[n][0]),buf2,8) != 0)
-			{
-			printf("ecb RC5 error decrypting (%d)\n",n+1);
-			printf("got     :");
-			for (i=0; i<8; i++)
-				printf("%02X ",buf2[i]);
-			printf("\n");
-			printf("expected:");
-			for (i=0; i<8; i++)
-				printf("%02X ",RC5plain[n][i]);
-			printf("\n");
-			err=3;
-			}
-		}
-	if (err == 0) printf("ecb RC5 ok\n");
-
-	for (n=0; n<RC5_CBC_NUM; n++)
-		{
-		i=rc5_cbc_rounds[n];
-		if (i < 8) continue;
-
-		RC5_32_set_key(&key,rc5_cbc_key[n][0],&(rc5_cbc_key[n][1]),i);
-
-		memcpy(ivb,&(rc5_cbc_iv[n][0]),8);
-		RC5_32_cbc_encrypt(&(rc5_cbc_plain[n][0]),buf,8,
-			&key,&(ivb[0]),RC5_ENCRYPT);
-
-		if (memcmp(&(rc5_cbc_cipher[n][0]),buf,8) != 0)
-			{
-			printf("cbc RC5 error encrypting (%d)\n",n+1);
-			printf("got     :");
-			for (i=0; i<8; i++)
-				printf("%02X ",buf[i]);
-			printf("\n");
-			printf("expected:");
-			for (i=0; i<8; i++)
-				printf("%02X ",rc5_cbc_cipher[n][i]);
-			err=30;
-			printf("\n");
-			}
-
-		memcpy(ivb,&(rc5_cbc_iv[n][0]),8);
-		RC5_32_cbc_encrypt(buf,buf2,8,
-			&key,&(ivb[0]),RC5_DECRYPT);
-		if (memcmp(&(rc5_cbc_plain[n][0]),buf2,8) != 0)
-			{
-			printf("cbc RC5 error decrypting (%d)\n",n+1);
-			printf("got     :");
-			for (i=0; i<8; i++)
-				printf("%02X ",buf2[i]);
-			printf("\n");
-			printf("expected:");
-			for (i=0; i<8; i++)
-				printf("%02X ",rc5_cbc_plain[n][i]);
-			printf("\n");
-			err=3;
-			}
-		}
-	if (err == 0) printf("cbc RC5 ok\n");
-
-	EXIT(err);
-	return(err);
-	}
-
-#ifdef undef
-static int cfb64_test(unsigned char *cfb_cipher)
-        {
-        IDEA_KEY_SCHEDULE eks,dks;
-        int err=0,i,n;
-
-        idea_set_encrypt_key(cfb_key,&eks);
-        idea_set_decrypt_key(&eks,&dks);
-        memcpy(cfb_tmp,cfb_iv,8);
-        n=0;
-        idea_cfb64_encrypt(plain,cfb_buf1,(long)12,&eks,
-                cfb_tmp,&n,IDEA_ENCRYPT);
-        idea_cfb64_encrypt(&(plain[12]),&(cfb_buf1[12]),
-                (long)CFB_TEST_SIZE-12,&eks,
-                cfb_tmp,&n,IDEA_ENCRYPT);
-        if (memcmp(cfb_cipher,cfb_buf1,CFB_TEST_SIZE) != 0)
-                {
-                err=1;
-                printf("idea_cfb64_encrypt encrypt error\n");
-                for (i=0; i<CFB_TEST_SIZE; i+=8)
-                        printf("%s\n",pt(&(cfb_buf1[i])));
-                }
-        memcpy(cfb_tmp,cfb_iv,8);
-        n=0;
-        idea_cfb64_encrypt(cfb_buf1,cfb_buf2,(long)17,&eks,
-                cfb_tmp,&n,IDEA_DECRYPT);
-        idea_cfb64_encrypt(&(cfb_buf1[17]),&(cfb_buf2[17]),
-                (long)CFB_TEST_SIZE-17,&dks,
-                cfb_tmp,&n,IDEA_DECRYPT);
-        if (memcmp(plain,cfb_buf2,CFB_TEST_SIZE) != 0)
-                {
-                err=1;
-                printf("idea_cfb_encrypt decrypt error\n");
-                for (i=0; i<24; i+=8)
-                        printf("%s\n",pt(&(cfb_buf2[i])));
-                }
-        return(err);
-        }
-
-static char *pt(unsigned char *p)
-	{
-	static char bufs[10][20];
-	static int bnum=0;
-	char *ret;
-	int i;
-	static char *f="0123456789ABCDEF";
-
-	ret= &(bufs[bnum++][0]);
-	bnum%=10;
-	for (i=0; i<8; i++)
-		{
-		ret[i*2]=f[(p[i]>>4)&0xf];
-		ret[i*2+1]=f[p[i]&0xf];
-		}
-	ret[16]='\0';
-	return(ret);
-	}
-	
-#endif
-#endif
diff --git a/crypto/openssl/crypto/ripemd/Makefile b/crypto/openssl/crypto/ripemd/Makefile
deleted file mode 100644
index d55875c20c11..000000000000
--- a/crypto/openssl/crypto/ripemd/Makefile
+++ /dev/null
@@ -1,99 +0,0 @@
-#
-# OpenSSL/crypto/ripemd/Makefile
-#
-
-DIR=    ripemd
-TOP=    ../..
-CC=     cc
-CPP=    $(CC) -E
-INCLUDES=
-CFLAG=-g
-MAKEFILE=       Makefile
-AR=             ar r
-
-RIP_ASM_OBJ=
-
-CFLAGS= $(INCLUDES) $(CFLAG)
-ASFLAGS= $(INCLUDES) $(ASFLAG)
-AFLAGS= $(ASFLAGS)
-
-GENERAL=Makefile
-TEST=rmdtest.c
-APPS=
-
-LIB=$(TOP)/libcrypto.a
-LIBSRC=rmd_dgst.c rmd_one.c
-LIBOBJ=rmd_dgst.o rmd_one.o $(RMD160_ASM_OBJ)
-
-SRC= $(LIBSRC)
-
-EXHEADER= ripemd.h
-HEADER= rmd_locl.h rmdconst.h $(EXHEADER)
-
-ALL=    $(GENERAL) $(SRC) $(HEADER)
-
-top:
-	(cd ../..; $(MAKE) DIRS=crypto SDIRS=$(DIR) sub_all)
-
-all:    lib
-
-lib:    $(LIBOBJ)
-	$(AR) $(LIB) $(LIBOBJ)
-	$(RANLIB) $(LIB) || echo Never mind.
-	@touch lib
-
-# ELF
-rm86-elf.s: asm/rmd-586.pl ../perlasm/x86asm.pl
-	(cd asm; $(PERL) rmd-586.pl elf $(CFLAGS) > ../$@)
-# COFF
-rm86-cof.s: asm/rmd-586.pl ../perlasm/x86asm.pl
-	(cd asm; $(PERL) rmd-586.pl coff $(CFLAGS) > ../$@)
-# a.out
-rm86-out.s: asm/rmd-586.pl ../perlasm/x86asm.pl
-	(cd asm; $(PERL) rmd-586.pl a.out $(CFLAGS) > ../$@)
-
-files:
-	$(PERL) $(TOP)/util/files.pl Makefile >> $(TOP)/MINFO
-
-links:
-	@$(PERL) $(TOP)/util/mklink.pl ../../include/openssl $(EXHEADER)
-	@$(PERL) $(TOP)/util/mklink.pl ../../test $(TEST)
-	@$(PERL) $(TOP)/util/mklink.pl ../../apps $(APPS)
-
-install:
-	@[ -n "$(INSTALLTOP)" ] # should be set by top Makefile...
-	@headerlist="$(EXHEADER)"; for i in $$headerlist ; \
-	do  \
-	(cp $$i $(INSTALL_PREFIX)$(INSTALLTOP)/include/openssl/$$i; \
-	chmod 644 $(INSTALL_PREFIX)$(INSTALLTOP)/include/openssl/$$i ); \
-	done;
-
-tags:
-	ctags $(SRC)
-
-tests:
-
-lint:
-	lint -DLINT $(INCLUDES) $(SRC)>fluff
-
-depend:
-	@[ -n "$(MAKEDEPEND)" ] # should be set by upper Makefile...
-	$(MAKEDEPEND) -- $(CFLAG) $(INCLUDES) $(DEPFLAG) -- $(PROGS) $(LIBSRC)
-
-dclean:
-	$(PERL) -pe 'if (/^# DO NOT DELETE THIS LINE/) {print; exit(0);}' $(MAKEFILE) >Makefile.new
-	mv -f Makefile.new $(MAKEFILE)
-
-clean:
-	rm -f *.s *.o *.obj lib tags core .pure .nfs* *.old *.bak fluff
-
-# DO NOT DELETE THIS LINE -- make depend depends on it.
-
-rmd_dgst.o: ../../include/openssl/e_os2.h ../../include/openssl/opensslconf.h
-rmd_dgst.o: ../../include/openssl/opensslv.h ../../include/openssl/ripemd.h
-rmd_dgst.o: ../md32_common.h rmd_dgst.c rmd_locl.h rmdconst.h
-rmd_one.o: ../../include/openssl/crypto.h ../../include/openssl/e_os2.h
-rmd_one.o: ../../include/openssl/opensslconf.h ../../include/openssl/opensslv.h
-rmd_one.o: ../../include/openssl/ossl_typ.h ../../include/openssl/ripemd.h
-rmd_one.o: ../../include/openssl/safestack.h ../../include/openssl/stack.h
-rmd_one.o: ../../include/openssl/symhacks.h rmd_one.c
diff --git a/crypto/openssl/crypto/ripemd/README b/crypto/openssl/crypto/ripemd/README
deleted file mode 100644
index 70977072649e..000000000000
--- a/crypto/openssl/crypto/ripemd/README
+++ /dev/null
@@ -1,15 +0,0 @@
-RIPEMD-160
-http://www.esat.kuleuven.ac.be/~bosselae/ripemd160.html
-
-This is my implementation of RIPEMD-160.  The pentium assember is a little
-off the pace since I only get 1050 cycles, while the best is 1013.
-I have a few ideas for how to get another 20 or so cycles, but at
-this point I will not bother right now.  I belive the trick will be
-to remove my 'copy X array onto stack' until inside the RIP1() finctions the
-first time round.  To do this I need another register and will only have one
-temporary one.  A bit tricky....  I can also cleanup the saving of the 5 words
-after the first half of the calculation.  I should read the origional
-value, add then write.  Currently I just save the new and read the origioal.
-I then read both at the end.  Bad.
-
-eric (20-Jan-1998)
diff --git a/crypto/openssl/crypto/ripemd/asm/rips.cpp b/crypto/openssl/crypto/ripemd/asm/rips.cpp
deleted file mode 100644
index f7a13677a921..000000000000
--- a/crypto/openssl/crypto/ripemd/asm/rips.cpp
+++ /dev/null
@@ -1,82 +0,0 @@
-//
-// gettsc.inl
-//
-// gives access to the Pentium's (secret) cycle counter
-//
-// This software was written by Leonard Janke (janke@unixg.ubc.ca)
-// in 1996-7 and is entered, by him, into the public domain.
-
-#if defined(__WATCOMC__)
-void GetTSC(unsigned long&);
-#pragma aux GetTSC = 0x0f 0x31 "mov [edi], eax" parm [edi] modify [edx eax];
-#elif defined(__GNUC__)
-inline
-void GetTSC(unsigned long& tsc)
-{
-  asm volatile(".byte 15, 49\n\t"
-	       : "=eax" (tsc)
-	       :
-	       : "%edx", "%eax");
-}
-#elif defined(_MSC_VER)
-inline
-void GetTSC(unsigned long& tsc)
-{
-  unsigned long a;
-  __asm _emit 0fh
-  __asm _emit 31h
-  __asm mov a, eax;
-  tsc=a;
-}
-#endif      
-
-#include <stdio.h>
-#include <stdlib.h>
-#include <openssl/ripemd.h>
-
-#define ripemd160_block_x86 ripemd160_block_asm_host_order
-
-extern "C" {
-void ripemd160_block_x86(RIPEMD160_CTX *ctx, unsigned char *buffer,int num);
-}
-
-void main(int argc,char *argv[])
-	{
-	unsigned char buffer[64*256];
-	RIPEMD160_CTX ctx;
-	unsigned long s1,s2,e1,e2;
-	unsigned char k[16];
-	unsigned long data[2];
-	unsigned char iv[8];
-	int i,num=0,numm;
-	int j=0;
-
-	if (argc >= 2)
-		num=atoi(argv[1]);
-
-	if (num == 0) num=16;
-	if (num > 250) num=16;
-	numm=num+2;
-#if 0
-	num*=64;
-	numm*=64;
-#endif
-
-	for (j=0; j<6; j++)
-		{
-		for (i=0; i<10; i++) /**/
-			{
-			ripemd160_block_x86(&ctx,buffer,numm);
-			GetTSC(s1);
-			ripemd160_block_x86(&ctx,buffer,numm);
-			GetTSC(e1);
-			GetTSC(s2);
-			ripemd160_block_x86(&ctx,buffer,num);
-			GetTSC(e2);
-			ripemd160_block_x86(&ctx,buffer,num);
-			}
-		printf("ripemd160 (%d bytes) %d %d (%.2f)\n",num*64,
-			e1-s1,e2-s2,(double)((e1-s1)-(e2-s2))/2);
-		}
-	}
-
diff --git a/crypto/openssl/crypto/ripemd/asm/rmd-586.pl b/crypto/openssl/crypto/ripemd/asm/rmd-586.pl
deleted file mode 100644
index 0ab6f76bfffb..000000000000
--- a/crypto/openssl/crypto/ripemd/asm/rmd-586.pl
+++ /dev/null
@@ -1,590 +0,0 @@
-#!/usr/local/bin/perl
-
-# Normal is the
-# ripemd160_block_asm_host_order(RIPEMD160_CTX *c, ULONG *X,int blocks);
-
-$normal=0;
-
-push(@INC,"perlasm","../../perlasm");
-require "x86asm.pl";
-
-&asm_init($ARGV[0],$0);
-
-$A="ecx";
-$B="esi";
-$C="edi";
-$D="ebx";
-$E="ebp";
-$tmp1="eax";
-$tmp2="edx";
-
-$KL1=0x5A827999;
-$KL2=0x6ED9EBA1;
-$KL3=0x8F1BBCDC;
-$KL4=0xA953FD4E;
-$KR0=0x50A28BE6;
-$KR1=0x5C4DD124; 
-$KR2=0x6D703EF3;
-$KR3=0x7A6D76E9;
-
-
-@wl=(	 0, 1, 2, 3, 4, 5, 6, 7, 8, 9,10,11,12,13,14,15,
-	 7, 4,13, 1,10, 6,15, 3,12, 0, 9, 5, 2,14,11, 8,
-	 3,10,14, 4, 9,15, 8, 1, 2, 7, 0, 6,13,11, 5,12,
-	 1, 9,11,10, 0, 8,12, 4,13, 3, 7,15,14, 5, 6, 2,
-	 4, 0, 5, 9, 7,12, 2,10,14, 1, 3, 8,11, 6,15,13,
-	 );
-
-@wr=(	 5,14, 7, 0, 9, 2,11, 4,13, 6,15, 8, 1,10, 3,12,
-	 6,11, 3, 7, 0,13, 5,10,14,15, 8,12, 4, 9, 1, 2,
-	15, 5, 1, 3, 7,14, 6, 9,11, 8,12, 2,10, 0, 4,13,
-	 8, 6, 4, 1, 3,11,15, 0, 5,12, 2,13, 9, 7,10,14,
-	12,15,10, 4, 1, 5, 8, 7, 6, 2,13,14, 0, 3, 9,11,
-	);
-
-@sl=(	11,14,15,12, 5, 8, 7, 9,11,13,14,15, 6, 7, 9, 8,
-	 7, 6, 8,13,11, 9, 7,15, 7,12,15, 9,11, 7,13,12,
-	11,13, 6, 7,14, 9,13,15,14, 8,13, 6, 5,12, 7, 5,
-	11,12,14,15,14,15, 9, 8, 9,14, 5, 6, 8, 6, 5,12,
-	 9,15, 5,11, 6, 8,13,12, 5,12,13,14,11, 8, 5, 6,
-	 );
-
-@sr=(	 8, 9, 9,11,13,15,15, 5, 7, 7, 8,11,14,14,12, 6,
-	 9,13,15, 7,12, 8, 9,11, 7, 7,12, 7, 6,15,13,11,
-	 9, 7,15,11, 8, 6, 6,14,12,13, 5,14,13,13, 7, 5,
-	15, 5, 8,11,14,14, 6,14, 6, 9,12, 9,12, 5,15, 8,
-	 8, 5,12, 9,12, 5,14, 6, 8,13, 6, 5,15,13,11,11,
- 	);
-
-&ripemd160_block("ripemd160_block_asm_host_order");
-&asm_finish();
-
-sub Xv
-	{
-	local($n)=@_;
-	return(&swtmp($n));
-	# tmp on stack
-	}
-
-sub Np
-	{
-	local($p)=@_;
-	local(%n)=($A,$E,$B,$A,$C,$B,$D,$C,$E,$D);
-	return($n{$p});
-	}
-
-sub RIP1
-	{
-	local($a,$b,$c,$d,$e,$pos,$s,$o,$pos2)=@_;
-
-	&comment($p++);
-	if ($p & 1)
-		{
-	 #&mov($tmp1,	$c) if $o == -1;
-	&xor($tmp1,	$d) if $o == -1;
-	 &mov($tmp2,	&Xv($pos));
-	&xor($tmp1,	$b);
-	 &add($a,	$tmp2);
-	&rotl($c,	10);
-	&add($a,	$tmp1);
-	 &mov($tmp1,	&Np($c));	# NEXT
-	 # XXX
-	&rotl($a,	$s);
-	&add($a,	$e);
-		}
-	else
-		{
-	 &xor($tmp1,	$d);
-	&mov($tmp2,	&Xv($pos));
-	 &xor($tmp1,	$b);
-	&add($a,	$tmp1);
-	 &mov($tmp1,	&Np($c)) if $o <= 0;
-	 &mov($tmp1,	-1) if $o == 1;
-	 # XXX if $o == 2;
-	&rotl($c,	10);
-	&add($a,	$tmp2);
-	 &xor($tmp1,	&Np($d)) if $o <= 0;
-	 &mov($tmp2,	&Xv($pos2)) if $o == 1;
-	 &mov($tmp2,	&wparam(0)) if $o == 2;
-	&rotl($a,	$s);
-	&add($a,	$e);
-		}
-	}
-
-sub RIP2
-	{
-	local($a,$b,$c,$d,$e,$pos,$pos2,$s,$K,$o)=@_;
-
-# XXXXXX
-	&comment($p++);
-	if ($p & 1)
-		{
-#	 &mov($tmp2,	&Xv($pos)) if $o < -1;
-#	&mov($tmp1,	-1) if $o < -1;
-
-	 &add($a,	$tmp2);
-	&mov($tmp2,	$c);
-	 &sub($tmp1,	$b);
-	&and($tmp2,	$b);
-	 &and($tmp1,	$d);
-	&or($tmp2,	$tmp1);
-	 &mov($tmp1,	&Xv($pos2)) if $o <= 0; # XXXXXXXXXXXXXX
-	 # XXX
-	&rotl($c,	10);
-	&lea($a,	&DWP($K,$a,$tmp2,1));
-	 &mov($tmp2,	-1) if $o <= 0;
-	 # XXX
-	&rotl($a,	$s);
-	&add($a,	$e);
-		}
-	else
-		{
-	 # XXX
-	 &add($a,	$tmp1);
-	&mov($tmp1,	$c);
-	 &sub($tmp2,	$b);
-	&and($tmp1,	$b);
-	 &and($tmp2,	$d);
-	if ($o != 2)
-		{
-	&or($tmp1,	$tmp2);
-	 &mov($tmp2,	&Xv($pos2)) if $o <= 0;
-	 &mov($tmp2,	-1) if $o == 1;
-	&rotl($c,	10);
-	&lea($a,	&DWP($K,$a,$tmp1,1));
-	 &mov($tmp1,	-1) if $o <= 0;
-	 &sub($tmp2,	&Np($c)) if $o == 1;
-		} else {
-	&or($tmp2,	$tmp1);
-	 &mov($tmp1,	&Np($c));
-	&rotl($c,	10);
-	&lea($a,	&DWP($K,$a,$tmp2,1));
-	 &xor($tmp1,	&Np($d));
-		}
-	&rotl($a,	$s);
-	&add($a,	$e);
-		}
-	}
-
-sub RIP3
-	{
-	local($a,$b,$c,$d,$e,$pos,$s,$K,$o,$pos2)=@_;
-
-	&comment($p++);
-	if ($p & 1)
-		{
-#	 &mov($tmp2,	-1) if $o < -1;
-#	&sub($tmp2,	$c) if $o < -1;
-	 &mov($tmp1,	&Xv($pos));
-	&or($tmp2,	$b);
-	 &add($a,	$tmp1);
-	&xor($tmp2,	$d);
-	 &mov($tmp1,	-1) if $o <= 0;		# NEXT
-	 # XXX
-	&rotl($c,	10);
-	&lea($a,	&DWP($K,$a,$tmp2,1));
-	 &sub($tmp1,	&Np($c)) if $o <= 0;	# NEXT
-	 # XXX
-	&rotl($a,	$s);
-	&add($a,	$e);
-		}
-	else
-		{
-	 &mov($tmp2,	&Xv($pos));
-	&or($tmp1,	$b);
-	 &add($a,	$tmp2);
-	&xor($tmp1,	$d);
-	 &mov($tmp2,	-1) if $o <= 0;		# NEXT
-	 &mov($tmp2,	-1) if $o == 1;
-	 &mov($tmp2,	&Xv($pos2)) if $o == 2;
-	&rotl($c,	10);
-	&lea($a,	&DWP($K,$a,$tmp1,1));
-	 &sub($tmp2,	&Np($c)) if $o <= 0;	# NEXT
-	 &mov($tmp1,	&Np($d)) if $o == 1;
-	 &mov($tmp1,	-1) if $o == 2;
-	&rotl($a,	$s);
-	&add($a,	$e);
-		}
-	}
-
-sub RIP4
-	{
-	local($a,$b,$c,$d,$e,$pos,$s,$K,$o)=@_;
-
-	&comment($p++);
-	if ($p & 1)
-		{
-#	 &mov($tmp2,	-1) if $o == -2;
-#	&mov($tmp1,	$d) if $o == -2;
-	 &sub($tmp2,	$d);
-	&and($tmp1,	$b);
-	 &and($tmp2,	$c);
-	&or($tmp2,	$tmp1);
-	 &mov($tmp1,	&Xv($pos));
-	&rotl($c,	10);
-	&lea($a,	&DWP($K,$a,$tmp2));
-	 &mov($tmp2,	-1) unless $o > 0;	# NEXT
-	 # XXX
-	&add($a,	$tmp1);
-	 &mov($tmp1,	&Np($d)) unless $o > 0; # NEXT
-	 # XXX
-	&rotl($a,	$s);
-	&add($a,	$e);
-		}
-	else
-		{
-	 &sub($tmp2,	$d);
-	&and($tmp1,	$b);
-	 &and($tmp2,	$c);
-	&or($tmp2,	$tmp1);
-	 &mov($tmp1,	&Xv($pos));
-	&rotl($c,	10);
-	&lea($a,	&DWP($K,$a,$tmp2));
-	 &mov($tmp2,	-1) if $o == 0;	# NEXT
-	 &mov($tmp2,	-1) if $o == 1;
-	 &mov($tmp2,	-1) if $o == 2;
-	 # XXX
-	&add($a,	$tmp1);
-	 &mov($tmp1,	&Np($d)) if $o == 0;	# NEXT
-	 &sub($tmp2,	&Np($d)) if $o == 1;
-	 &sub($tmp2,	&Np($c)) if $o == 2;
-	 # XXX
-	&rotl($a,	$s);
-	&add($a,	$e);
-		}
-	}
-
-sub RIP5
-	{
-	local($a,$b,$c,$d,$e,$pos,$s,$K,$o)=@_;
-
-	&comment($p++);
-	if ($p & 1)
-		{
-	 &mov($tmp2,	-1) if $o == -2;
-	&sub($tmp2,	$d) if $o == -2;
-	 &mov($tmp1,	&Xv($pos));
-	&or($tmp2,	$c);
-	 &add($a,	$tmp1);
-	&xor($tmp2,	$b);
-	 &mov($tmp1,	-1) if $o <= 0;
-	 # XXX
-	&rotl($c,	10);
-	&lea($a,	&DWP($K,$a,$tmp2,1));
-	 &sub($tmp1,	&Np($d)) if $o <= 0;
-	 # XXX
-	&rotl($a,	$s);
-	&add($a,	$e);
-		}
-	else
-		{
-	 &mov($tmp2,	&Xv($pos));
-	&or($tmp1,	$c);
-	 &add($a,	$tmp2);
-	&xor($tmp1,	$b);
-	 &mov($tmp2,	-1) if $o <= 0;
-	 &mov($tmp2,	&wparam(0)) if $o == 1;	# Middle code
-	 &mov($tmp2,	-1) if $o == 2;
-	&rotl($c,	10);
-	&lea($a,	&DWP($K,$a,$tmp1,1));
-	 &sub($tmp2,	&Np($d)) if $o <= 0;
-	 &mov(&swtmp(16),	$A) if $o == 1;
-	 &mov($tmp1,	&Np($d)) if $o == 2;
-	&rotl($a,	$s);
-	&add($a,	$e);
-		}
-	}
-
-sub ripemd160_block
-	{
-	local($name)=@_;
-
-	&function_begin_B($name,"",3);
-
-	# parameter 1 is the RIPEMD160_CTX structure.
-	# A	0
-	# B	4
-	# C	8
-	# D 	12
-	# E 	16
-
-	&mov($tmp2,	&wparam(0));
-	 &mov($tmp1,	&wparam(1));
-	&push("esi");
-	 &mov($A,	&DWP( 0,$tmp2,"",0));
-	&push("edi");
-	 &mov($B,	&DWP( 4,$tmp2,"",0));
-	&push("ebp");
-	 &mov($C,	&DWP( 8,$tmp2,"",0));
-	&push("ebx");
-	 &stack_push(16+5+6);
-			  # Special comment about the figure of 6.
-			  # Idea is to pad the current frame so
-			  # that the top of the stack gets fairly
-			  # aligned. Well, as you realize it would
-			  # always depend on how the frame below is
-			  # aligned. The good news are that gcc-2.95
-			  # and later does keep first argument at
-			  # least double-wise aligned.
-			  #			<appro@fy.chalmers.se>
-
-	&set_label("start") unless $normal;
-	&comment("");
-
-	# &mov($tmp1,	&wparam(1)); # Done at end of loop
-	# &mov($tmp2,	&wparam(0)); # Done at end of loop
-
-	for ($z=0; $z<16; $z+=2)
-		{
-		&mov($D,		&DWP( $z*4,$tmp1,"",0));
-		 &mov($E,		&DWP( ($z+1)*4,$tmp1,"",0));
-		&mov(&swtmp($z),	$D);
-		 &mov(&swtmp($z+1),	$E);
-		}
-	&mov($tmp1,	$C);
-	 &mov($D,	&DWP(12,$tmp2,"",0));
-	&mov($E,	&DWP(16,$tmp2,"",0));
-
-	&RIP1($A,$B,$C,$D,$E,$wl[ 0],$sl[ 0],-1);
-	&RIP1($E,$A,$B,$C,$D,$wl[ 1],$sl[ 1],0);
-	&RIP1($D,$E,$A,$B,$C,$wl[ 2],$sl[ 2],0);
-	&RIP1($C,$D,$E,$A,$B,$wl[ 3],$sl[ 3],0);
-	&RIP1($B,$C,$D,$E,$A,$wl[ 4],$sl[ 4],0);
-	&RIP1($A,$B,$C,$D,$E,$wl[ 5],$sl[ 5],0);
-	&RIP1($E,$A,$B,$C,$D,$wl[ 6],$sl[ 6],0);
-	&RIP1($D,$E,$A,$B,$C,$wl[ 7],$sl[ 7],0);
-	&RIP1($C,$D,$E,$A,$B,$wl[ 8],$sl[ 8],0);
-	&RIP1($B,$C,$D,$E,$A,$wl[ 9],$sl[ 9],0);
-	&RIP1($A,$B,$C,$D,$E,$wl[10],$sl[10],0);
-	&RIP1($E,$A,$B,$C,$D,$wl[11],$sl[11],0);
-	&RIP1($D,$E,$A,$B,$C,$wl[12],$sl[12],0);
-	&RIP1($C,$D,$E,$A,$B,$wl[13],$sl[13],0);
-	&RIP1($B,$C,$D,$E,$A,$wl[14],$sl[14],0);
-	&RIP1($A,$B,$C,$D,$E,$wl[15],$sl[15],1,$wl[16]);
-
-	&RIP2($E,$A,$B,$C,$D,$wl[16],$wl[17],$sl[16],$KL1,-1);
-	&RIP2($D,$E,$A,$B,$C,$wl[17],$wl[18],$sl[17],$KL1,0);
-	&RIP2($C,$D,$E,$A,$B,$wl[18],$wl[19],$sl[18],$KL1,0);
-	&RIP2($B,$C,$D,$E,$A,$wl[19],$wl[20],$sl[19],$KL1,0);
-	&RIP2($A,$B,$C,$D,$E,$wl[20],$wl[21],$sl[20],$KL1,0);
-	&RIP2($E,$A,$B,$C,$D,$wl[21],$wl[22],$sl[21],$KL1,0);
-	&RIP2($D,$E,$A,$B,$C,$wl[22],$wl[23],$sl[22],$KL1,0);
-	&RIP2($C,$D,$E,$A,$B,$wl[23],$wl[24],$sl[23],$KL1,0);
-	&RIP2($B,$C,$D,$E,$A,$wl[24],$wl[25],$sl[24],$KL1,0);
-	&RIP2($A,$B,$C,$D,$E,$wl[25],$wl[26],$sl[25],$KL1,0);
-	&RIP2($E,$A,$B,$C,$D,$wl[26],$wl[27],$sl[26],$KL1,0);
-	&RIP2($D,$E,$A,$B,$C,$wl[27],$wl[28],$sl[27],$KL1,0);
-	&RIP2($C,$D,$E,$A,$B,$wl[28],$wl[29],$sl[28],$KL1,0);
-	&RIP2($B,$C,$D,$E,$A,$wl[29],$wl[30],$sl[29],$KL1,0);
-	&RIP2($A,$B,$C,$D,$E,$wl[30],$wl[31],$sl[30],$KL1,0);
-	&RIP2($E,$A,$B,$C,$D,$wl[31],$wl[32],$sl[31],$KL1,1);
-
-	&RIP3($D,$E,$A,$B,$C,$wl[32],$sl[32],$KL2,-1);
-	&RIP3($C,$D,$E,$A,$B,$wl[33],$sl[33],$KL2,0);
-	&RIP3($B,$C,$D,$E,$A,$wl[34],$sl[34],$KL2,0);
-	&RIP3($A,$B,$C,$D,$E,$wl[35],$sl[35],$KL2,0);
-	&RIP3($E,$A,$B,$C,$D,$wl[36],$sl[36],$KL2,0);
-	&RIP3($D,$E,$A,$B,$C,$wl[37],$sl[37],$KL2,0);
-	&RIP3($C,$D,$E,$A,$B,$wl[38],$sl[38],$KL2,0);
-	&RIP3($B,$C,$D,$E,$A,$wl[39],$sl[39],$KL2,0);
-	&RIP3($A,$B,$C,$D,$E,$wl[40],$sl[40],$KL2,0);
-	&RIP3($E,$A,$B,$C,$D,$wl[41],$sl[41],$KL2,0);
-	&RIP3($D,$E,$A,$B,$C,$wl[42],$sl[42],$KL2,0);
-	&RIP3($C,$D,$E,$A,$B,$wl[43],$sl[43],$KL2,0);
-	&RIP3($B,$C,$D,$E,$A,$wl[44],$sl[44],$KL2,0);
-	&RIP3($A,$B,$C,$D,$E,$wl[45],$sl[45],$KL2,0);
-	&RIP3($E,$A,$B,$C,$D,$wl[46],$sl[46],$KL2,0);
-	&RIP3($D,$E,$A,$B,$C,$wl[47],$sl[47],$KL2,1);
-
-	&RIP4($C,$D,$E,$A,$B,$wl[48],$sl[48],$KL3,-1);
-	&RIP4($B,$C,$D,$E,$A,$wl[49],$sl[49],$KL3,0);
-	&RIP4($A,$B,$C,$D,$E,$wl[50],$sl[50],$KL3,0);
-	&RIP4($E,$A,$B,$C,$D,$wl[51],$sl[51],$KL3,0);
-	&RIP4($D,$E,$A,$B,$C,$wl[52],$sl[52],$KL3,0);
-	&RIP4($C,$D,$E,$A,$B,$wl[53],$sl[53],$KL3,0);
-	&RIP4($B,$C,$D,$E,$A,$wl[54],$sl[54],$KL3,0);
-	&RIP4($A,$B,$C,$D,$E,$wl[55],$sl[55],$KL3,0);
-	&RIP4($E,$A,$B,$C,$D,$wl[56],$sl[56],$KL3,0);
-	&RIP4($D,$E,$A,$B,$C,$wl[57],$sl[57],$KL3,0);
-	&RIP4($C,$D,$E,$A,$B,$wl[58],$sl[58],$KL3,0);
-	&RIP4($B,$C,$D,$E,$A,$wl[59],$sl[59],$KL3,0);
-	&RIP4($A,$B,$C,$D,$E,$wl[60],$sl[60],$KL3,0);
-	&RIP4($E,$A,$B,$C,$D,$wl[61],$sl[61],$KL3,0);
-	&RIP4($D,$E,$A,$B,$C,$wl[62],$sl[62],$KL3,0);
-	&RIP4($C,$D,$E,$A,$B,$wl[63],$sl[63],$KL3,1);
-
-	&RIP5($B,$C,$D,$E,$A,$wl[64],$sl[64],$KL4,-1);
-	&RIP5($A,$B,$C,$D,$E,$wl[65],$sl[65],$KL4,0);
-	&RIP5($E,$A,$B,$C,$D,$wl[66],$sl[66],$KL4,0);
-	&RIP5($D,$E,$A,$B,$C,$wl[67],$sl[67],$KL4,0);
-	&RIP5($C,$D,$E,$A,$B,$wl[68],$sl[68],$KL4,0);
-	&RIP5($B,$C,$D,$E,$A,$wl[69],$sl[69],$KL4,0);
-	&RIP5($A,$B,$C,$D,$E,$wl[70],$sl[70],$KL4,0);
-	&RIP5($E,$A,$B,$C,$D,$wl[71],$sl[71],$KL4,0);
-	&RIP5($D,$E,$A,$B,$C,$wl[72],$sl[72],$KL4,0);
-	&RIP5($C,$D,$E,$A,$B,$wl[73],$sl[73],$KL4,0);
-	&RIP5($B,$C,$D,$E,$A,$wl[74],$sl[74],$KL4,0);
-	&RIP5($A,$B,$C,$D,$E,$wl[75],$sl[75],$KL4,0);
-	&RIP5($E,$A,$B,$C,$D,$wl[76],$sl[76],$KL4,0);
-	&RIP5($D,$E,$A,$B,$C,$wl[77],$sl[77],$KL4,0);
-	&RIP5($C,$D,$E,$A,$B,$wl[78],$sl[78],$KL4,0);
-	&RIP5($B,$C,$D,$E,$A,$wl[79],$sl[79],$KL4,1);
-
-	# &mov($tmp2,	&wparam(0)); # moved into last RIP5
-	# &mov(&swtmp(16),	$A);
-	 &mov($A,	&DWP( 0,$tmp2,"",0));
-	&mov(&swtmp(16+1),	$B);
-	 &mov(&swtmp(16+2),	$C);
-	&mov($B,	&DWP( 4,$tmp2,"",0));
-	 &mov(&swtmp(16+3),	$D);
-	&mov($C,	&DWP( 8,$tmp2,"",0));
-	 &mov(&swtmp(16+4),	$E);
-	&mov($D,	&DWP(12,$tmp2,"",0));
-	 &mov($E,	&DWP(16,$tmp2,"",0));
-
-	&RIP5($A,$B,$C,$D,$E,$wr[ 0],$sr[ 0],$KR0,-2);
-	&RIP5($E,$A,$B,$C,$D,$wr[ 1],$sr[ 1],$KR0,0);
-	&RIP5($D,$E,$A,$B,$C,$wr[ 2],$sr[ 2],$KR0,0);
-	&RIP5($C,$D,$E,$A,$B,$wr[ 3],$sr[ 3],$KR0,0);
-	&RIP5($B,$C,$D,$E,$A,$wr[ 4],$sr[ 4],$KR0,0);
-	&RIP5($A,$B,$C,$D,$E,$wr[ 5],$sr[ 5],$KR0,0);
-	&RIP5($E,$A,$B,$C,$D,$wr[ 6],$sr[ 6],$KR0,0);
-	&RIP5($D,$E,$A,$B,$C,$wr[ 7],$sr[ 7],$KR0,0);
-	&RIP5($C,$D,$E,$A,$B,$wr[ 8],$sr[ 8],$KR0,0);
-	&RIP5($B,$C,$D,$E,$A,$wr[ 9],$sr[ 9],$KR0,0);
-	&RIP5($A,$B,$C,$D,$E,$wr[10],$sr[10],$KR0,0);
-	&RIP5($E,$A,$B,$C,$D,$wr[11],$sr[11],$KR0,0);
-	&RIP5($D,$E,$A,$B,$C,$wr[12],$sr[12],$KR0,0);
-	&RIP5($C,$D,$E,$A,$B,$wr[13],$sr[13],$KR0,0);
-	&RIP5($B,$C,$D,$E,$A,$wr[14],$sr[14],$KR0,0);
-	&RIP5($A,$B,$C,$D,$E,$wr[15],$sr[15],$KR0,2);
-
-	&RIP4($E,$A,$B,$C,$D,$wr[16],$sr[16],$KR1,-2);
-	&RIP4($D,$E,$A,$B,$C,$wr[17],$sr[17],$KR1,0);
-	&RIP4($C,$D,$E,$A,$B,$wr[18],$sr[18],$KR1,0);
-	&RIP4($B,$C,$D,$E,$A,$wr[19],$sr[19],$KR1,0);
-	&RIP4($A,$B,$C,$D,$E,$wr[20],$sr[20],$KR1,0);
-	&RIP4($E,$A,$B,$C,$D,$wr[21],$sr[21],$KR1,0);
-	&RIP4($D,$E,$A,$B,$C,$wr[22],$sr[22],$KR1,0);
-	&RIP4($C,$D,$E,$A,$B,$wr[23],$sr[23],$KR1,0);
-	&RIP4($B,$C,$D,$E,$A,$wr[24],$sr[24],$KR1,0);
-	&RIP4($A,$B,$C,$D,$E,$wr[25],$sr[25],$KR1,0);
-	&RIP4($E,$A,$B,$C,$D,$wr[26],$sr[26],$KR1,0);
-	&RIP4($D,$E,$A,$B,$C,$wr[27],$sr[27],$KR1,0);
-	&RIP4($C,$D,$E,$A,$B,$wr[28],$sr[28],$KR1,0);
-	&RIP4($B,$C,$D,$E,$A,$wr[29],$sr[29],$KR1,0);
-	&RIP4($A,$B,$C,$D,$E,$wr[30],$sr[30],$KR1,0);
-	&RIP4($E,$A,$B,$C,$D,$wr[31],$sr[31],$KR1,2);
-
-	&RIP3($D,$E,$A,$B,$C,$wr[32],$sr[32],$KR2,-2);
-	&RIP3($C,$D,$E,$A,$B,$wr[33],$sr[33],$KR2,0);
-	&RIP3($B,$C,$D,$E,$A,$wr[34],$sr[34],$KR2,0);
-	&RIP3($A,$B,$C,$D,$E,$wr[35],$sr[35],$KR2,0);
-	&RIP3($E,$A,$B,$C,$D,$wr[36],$sr[36],$KR2,0);
-	&RIP3($D,$E,$A,$B,$C,$wr[37],$sr[37],$KR2,0);
-	&RIP3($C,$D,$E,$A,$B,$wr[38],$sr[38],$KR2,0);
-	&RIP3($B,$C,$D,$E,$A,$wr[39],$sr[39],$KR2,0);
-	&RIP3($A,$B,$C,$D,$E,$wr[40],$sr[40],$KR2,0);
-	&RIP3($E,$A,$B,$C,$D,$wr[41],$sr[41],$KR2,0);
-	&RIP3($D,$E,$A,$B,$C,$wr[42],$sr[42],$KR2,0);
-	&RIP3($C,$D,$E,$A,$B,$wr[43],$sr[43],$KR2,0);
-	&RIP3($B,$C,$D,$E,$A,$wr[44],$sr[44],$KR2,0);
-	&RIP3($A,$B,$C,$D,$E,$wr[45],$sr[45],$KR2,0);
-	&RIP3($E,$A,$B,$C,$D,$wr[46],$sr[46],$KR2,0);
-	&RIP3($D,$E,$A,$B,$C,$wr[47],$sr[47],$KR2,2,$wr[48]);
-
-	&RIP2($C,$D,$E,$A,$B,$wr[48],$wr[49],$sr[48],$KR3,-2);
-	&RIP2($B,$C,$D,$E,$A,$wr[49],$wr[50],$sr[49],$KR3,0);
-	&RIP2($A,$B,$C,$D,$E,$wr[50],$wr[51],$sr[50],$KR3,0);
-	&RIP2($E,$A,$B,$C,$D,$wr[51],$wr[52],$sr[51],$KR3,0);
-	&RIP2($D,$E,$A,$B,$C,$wr[52],$wr[53],$sr[52],$KR3,0);
-	&RIP2($C,$D,$E,$A,$B,$wr[53],$wr[54],$sr[53],$KR3,0);
-	&RIP2($B,$C,$D,$E,$A,$wr[54],$wr[55],$sr[54],$KR3,0);
-	&RIP2($A,$B,$C,$D,$E,$wr[55],$wr[56],$sr[55],$KR3,0);
-	&RIP2($E,$A,$B,$C,$D,$wr[56],$wr[57],$sr[56],$KR3,0);
-	&RIP2($D,$E,$A,$B,$C,$wr[57],$wr[58],$sr[57],$KR3,0);
-	&RIP2($C,$D,$E,$A,$B,$wr[58],$wr[59],$sr[58],$KR3,0);
-	&RIP2($B,$C,$D,$E,$A,$wr[59],$wr[60],$sr[59],$KR3,0);
-	&RIP2($A,$B,$C,$D,$E,$wr[60],$wr[61],$sr[60],$KR3,0);
-	&RIP2($E,$A,$B,$C,$D,$wr[61],$wr[62],$sr[61],$KR3,0);
-	&RIP2($D,$E,$A,$B,$C,$wr[62],$wr[63],$sr[62],$KR3,0);
-	&RIP2($C,$D,$E,$A,$B,$wr[63],$wr[64],$sr[63],$KR3,2);
-
-	&RIP1($B,$C,$D,$E,$A,$wr[64],$sr[64],-2);
-	&RIP1($A,$B,$C,$D,$E,$wr[65],$sr[65],0);
-	&RIP1($E,$A,$B,$C,$D,$wr[66],$sr[66],0);
-	&RIP1($D,$E,$A,$B,$C,$wr[67],$sr[67],0);
-	&RIP1($C,$D,$E,$A,$B,$wr[68],$sr[68],0);
-	&RIP1($B,$C,$D,$E,$A,$wr[69],$sr[69],0);
-	&RIP1($A,$B,$C,$D,$E,$wr[70],$sr[70],0);
-	&RIP1($E,$A,$B,$C,$D,$wr[71],$sr[71],0);
-	&RIP1($D,$E,$A,$B,$C,$wr[72],$sr[72],0);
-	&RIP1($C,$D,$E,$A,$B,$wr[73],$sr[73],0);
-	&RIP1($B,$C,$D,$E,$A,$wr[74],$sr[74],0);
-	&RIP1($A,$B,$C,$D,$E,$wr[75],$sr[75],0);
-	&RIP1($E,$A,$B,$C,$D,$wr[76],$sr[76],0);
-	&RIP1($D,$E,$A,$B,$C,$wr[77],$sr[77],0);
-	&RIP1($C,$D,$E,$A,$B,$wr[78],$sr[78],0);
-	&RIP1($B,$C,$D,$E,$A,$wr[79],$sr[79],2);
-
-	# &mov($tmp2,	&wparam(0)); # Moved into last round
-
-	 &mov($tmp1,	&DWP( 4,$tmp2,"",0));	# ctx->B
- 	&add($D,	$tmp1);	
-	 &mov($tmp1,	&swtmp(16+2));		# $c
-	&add($D,	$tmp1);
-
-	 &mov($tmp1,	&DWP( 8,$tmp2,"",0));	# ctx->C
-	&add($E,	$tmp1);	
-	 &mov($tmp1,	&swtmp(16+3));		# $d
-	&add($E,	$tmp1);
-
-	 &mov($tmp1,	&DWP(12,$tmp2,"",0));	# ctx->D
-	&add($A,	$tmp1);	
-	 &mov($tmp1,	&swtmp(16+4));		# $e
-	&add($A,	$tmp1);
-
-
-	 &mov($tmp1,	&DWP(16,$tmp2,"",0));	# ctx->E
-	&add($B,	$tmp1);	
-	 &mov($tmp1,	&swtmp(16+0));		# $a
-	&add($B,	$tmp1);
-
-	 &mov($tmp1,	&DWP( 0,$tmp2,"",0));	# ctx->A
-	&add($C,	$tmp1);	
-	 &mov($tmp1,	&swtmp(16+1));		# $b
-	&add($C,	$tmp1);
-
-	 &mov($tmp1,	&wparam(2));
-
-	&mov(&DWP( 0,$tmp2,"",0),	$D);
-	 &mov(&DWP( 4,$tmp2,"",0),	$E);
-	&mov(&DWP( 8,$tmp2,"",0),	$A);
-	 &sub($tmp1,1);
-	&mov(&DWP(12,$tmp2,"",0),	$B);
-	 &mov(&DWP(16,$tmp2,"",0),	$C);
-
-	&jle(&label("get_out"));
-
-	&mov(&wparam(2),$tmp1);
-	 &mov($C,	$A);
-	&mov($tmp1,	&wparam(1));
-	 &mov($A,	$D);
-	&add($tmp1,	64);
-	 &mov($B,	$E);
-	&mov(&wparam(1),$tmp1);
-
-	&jmp(&label("start"));
-
-	&set_label("get_out");
-
-	&stack_pop(16+5+6);
-
-	&pop("ebx");
-	&pop("ebp");
-	&pop("edi");
-	&pop("esi");
-	&ret();
-	&function_end_B($name);
-	}
-
diff --git a/crypto/openssl/crypto/ripemd/ripemd.h b/crypto/openssl/crypto/ripemd/ripemd.h
deleted file mode 100644
index 033a5965b58d..000000000000
--- a/crypto/openssl/crypto/ripemd/ripemd.h
+++ /dev/null
@@ -1,104 +0,0 @@
-/* crypto/ripemd/ripemd.h */
-/* Copyright (C) 1995-1998 Eric Young (eay@cryptsoft.com)
- * All rights reserved.
- *
- * This package is an SSL implementation written
- * by Eric Young (eay@cryptsoft.com).
- * The implementation was written so as to conform with Netscapes SSL.
- * 
- * This library is free for commercial and non-commercial use as long as
- * the following conditions are aheared to.  The following conditions
- * apply to all code found in this distribution, be it the RC4, RSA,
- * lhash, DES, etc., code; not just the SSL code.  The SSL documentation
- * included with this distribution is covered by the same copyright terms
- * except that the holder is Tim Hudson (tjh@cryptsoft.com).
- * 
- * Copyright remains Eric Young's, and as such any Copyright notices in
- * the code are not to be removed.
- * If this package is used in a product, Eric Young should be given attribution
- * as the author of the parts of the library used.
- * This can be in the form of a textual message at program startup or
- * in documentation (online or textual) provided with the package.
- * 
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions
- * are met:
- * 1. Redistributions of source code must retain the copyright
- *    notice, this list of conditions and the following disclaimer.
- * 2. Redistributions in binary form must reproduce the above copyright
- *    notice, this list of conditions and the following disclaimer in the
- *    documentation and/or other materials provided with the distribution.
- * 3. All advertising materials mentioning features or use of this software
- *    must display the following acknowledgement:
- *    "This product includes cryptographic software written by
- *     Eric Young (eay@cryptsoft.com)"
- *    The word 'cryptographic' can be left out if the rouines from the library
- *    being used are not cryptographic related :-).
- * 4. If you include any Windows specific code (or a derivative thereof) from 
- *    the apps directory (application code) you must include an acknowledgement:
- *    "This product includes software written by Tim Hudson (tjh@cryptsoft.com)"
- * 
- * THIS SOFTWARE IS PROVIDED BY ERIC YOUNG ``AS IS'' AND
- * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
- * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
- * ARE DISCLAIMED.  IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE
- * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
- * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
- * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
- * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
- * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
- * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
- * SUCH DAMAGE.
- * 
- * The licence and distribution terms for any publically available version or
- * derivative of this code cannot be changed.  i.e. this code cannot simply be
- * copied and put under another distribution licence
- * [including the GNU Public Licence.]
- */
-
-#ifndef HEADER_RIPEMD_H
-#define HEADER_RIPEMD_H
-
-#include <openssl/e_os2.h>
-#include <stddef.h>
-
-#ifdef  __cplusplus
-extern "C" {
-#endif
-
-#ifdef OPENSSL_NO_RIPEMD
-#error RIPEMD is disabled.
-#endif
-
-#if defined(OPENSSL_SYS_WIN16) || defined(__LP32__)
-#define RIPEMD160_LONG unsigned long
-#elif defined(OPENSSL_SYS_CRAY) || defined(__ILP64__)
-#define RIPEMD160_LONG unsigned long
-#define RIPEMD160_LONG_LOG2 3
-#else
-#define RIPEMD160_LONG unsigned int
-#endif
-
-#define RIPEMD160_CBLOCK	64
-#define RIPEMD160_LBLOCK	(RIPEMD160_CBLOCK/4)
-#define RIPEMD160_DIGEST_LENGTH	20
-
-typedef struct RIPEMD160state_st
-	{
-	RIPEMD160_LONG A,B,C,D,E;
-	RIPEMD160_LONG Nl,Nh;
-	RIPEMD160_LONG data[RIPEMD160_LBLOCK];
-	unsigned int   num;
-	} RIPEMD160_CTX;
-
-int RIPEMD160_Init(RIPEMD160_CTX *c);
-int RIPEMD160_Update(RIPEMD160_CTX *c, const void *data, size_t len);
-int RIPEMD160_Final(unsigned char *md, RIPEMD160_CTX *c);
-unsigned char *RIPEMD160(const unsigned char *d, size_t n,
-	unsigned char *md);
-void RIPEMD160_Transform(RIPEMD160_CTX *c, const unsigned char *b);
-#ifdef  __cplusplus
-}
-#endif
-
-#endif
diff --git a/crypto/openssl/crypto/ripemd/rmd160.c b/crypto/openssl/crypto/ripemd/rmd160.c
deleted file mode 100644
index b0ec57449890..000000000000
--- a/crypto/openssl/crypto/ripemd/rmd160.c
+++ /dev/null
@@ -1,127 +0,0 @@
-/* crypto/ripemd/rmd160.c */
-/* Copyright (C) 1995-1998 Eric Young (eay@cryptsoft.com)
- * All rights reserved.
- *
- * This package is an SSL implementation written
- * by Eric Young (eay@cryptsoft.com).
- * The implementation was written so as to conform with Netscapes SSL.
- * 
- * This library is free for commercial and non-commercial use as long as
- * the following conditions are aheared to.  The following conditions
- * apply to all code found in this distribution, be it the RC4, RSA,
- * lhash, DES, etc., code; not just the SSL code.  The SSL documentation
- * included with this distribution is covered by the same copyright terms
- * except that the holder is Tim Hudson (tjh@cryptsoft.com).
- * 
- * Copyright remains Eric Young's, and as such any Copyright notices in
- * the code are not to be removed.
- * If this package is used in a product, Eric Young should be given attribution
- * as the author of the parts of the library used.
- * This can be in the form of a textual message at program startup or
- * in documentation (online or textual) provided with the package.
- * 
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions
- * are met:
- * 1. Redistributions of source code must retain the copyright
- *    notice, this list of conditions and the following disclaimer.
- * 2. Redistributions in binary form must reproduce the above copyright
- *    notice, this list of conditions and the following disclaimer in the
- *    documentation and/or other materials provided with the distribution.
- * 3. All advertising materials mentioning features or use of this software
- *    must display the following acknowledgement:
- *    "This product includes cryptographic software written by
- *     Eric Young (eay@cryptsoft.com)"
- *    The word 'cryptographic' can be left out if the rouines from the library
- *    being used are not cryptographic related :-).
- * 4. If you include any Windows specific code (or a derivative thereof) from 
- *    the apps directory (application code) you must include an acknowledgement:
- *    "This product includes software written by Tim Hudson (tjh@cryptsoft.com)"
- * 
- * THIS SOFTWARE IS PROVIDED BY ERIC YOUNG ``AS IS'' AND
- * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
- * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
- * ARE DISCLAIMED.  IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE
- * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
- * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
- * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
- * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
- * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
- * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
- * SUCH DAMAGE.
- * 
- * The licence and distribution terms for any publically available version or
- * derivative of this code cannot be changed.  i.e. this code cannot simply be
- * copied and put under another distribution licence
- * [including the GNU Public Licence.]
- */
-
-#include <stdio.h>
-#include <stdlib.h>
-#include <openssl/ripemd.h>
-
-#define BUFSIZE	1024*16
-
-void do_fp(FILE *f);
-void pt(unsigned char *md);
-#if !defined(_OSD_POSIX) && !defined(__DJGPP__)
-int read(int, void *, unsigned int);
-#endif
-
-int main(int argc, char **argv)
-	{
-	int i,err=0;
-	FILE *IN;
-
-	if (argc == 1)
-		{
-		do_fp(stdin);
-		}
-	else
-		{
-		for (i=1; i<argc; i++)
-			{
-			IN=fopen(argv[i],"r");
-			if (IN == NULL)
-				{
-				perror(argv[i]);
-				err++;
-				continue;
-				}
-			printf("RIPEMD160(%s)= ",argv[i]);
-			do_fp(IN);
-			fclose(IN);
-			}
-		}
-	exit(err);
-	}
-
-void do_fp(FILE *f)
-	{
-	RIPEMD160_CTX c;
-	unsigned char md[RIPEMD160_DIGEST_LENGTH];
-	int fd;
-	int i;
-	static unsigned char buf[BUFSIZE];
-
-	fd=fileno(f);
-	RIPEMD160_Init(&c);
-	for (;;)
-		{
-		i=read(fd,buf,BUFSIZE);
-		if (i <= 0) break;
-		RIPEMD160_Update(&c,buf,(unsigned long)i);
-		}
-	RIPEMD160_Final(&(md[0]),&c);
-	pt(md);
-	}
-
-void pt(unsigned char *md)
-	{
-	int i;
-
-	for (i=0; i<RIPEMD160_DIGEST_LENGTH; i++)
-		printf("%02x",md[i]);
-	printf("\n");
-	}
-
diff --git a/crypto/openssl/crypto/ripemd/rmd_dgst.c b/crypto/openssl/crypto/ripemd/rmd_dgst.c
deleted file mode 100644
index 9608a8fd0e56..000000000000
--- a/crypto/openssl/crypto/ripemd/rmd_dgst.c
+++ /dev/null
@@ -1,494 +0,0 @@
-/* crypto/ripemd/rmd_dgst.c */
-/* Copyright (C) 1995-1998 Eric Young (eay@cryptsoft.com)
- * All rights reserved.
- *
- * This package is an SSL implementation written
- * by Eric Young (eay@cryptsoft.com).
- * The implementation was written so as to conform with Netscapes SSL.
- * 
- * This library is free for commercial and non-commercial use as long as
- * the following conditions are aheared to.  The following conditions
- * apply to all code found in this distribution, be it the RC4, RSA,
- * lhash, DES, etc., code; not just the SSL code.  The SSL documentation
- * included with this distribution is covered by the same copyright terms
- * except that the holder is Tim Hudson (tjh@cryptsoft.com).
- * 
- * Copyright remains Eric Young's, and as such any Copyright notices in
- * the code are not to be removed.
- * If this package is used in a product, Eric Young should be given attribution
- * as the author of the parts of the library used.
- * This can be in the form of a textual message at program startup or
- * in documentation (online or textual) provided with the package.
- * 
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions
- * are met:
- * 1. Redistributions of source code must retain the copyright
- *    notice, this list of conditions and the following disclaimer.
- * 2. Redistributions in binary form must reproduce the above copyright
- *    notice, this list of conditions and the following disclaimer in the
- *    documentation and/or other materials provided with the distribution.
- * 3. All advertising materials mentioning features or use of this software
- *    must display the following acknowledgement:
- *    "This product includes cryptographic software written by
- *     Eric Young (eay@cryptsoft.com)"
- *    The word 'cryptographic' can be left out if the rouines from the library
- *    being used are not cryptographic related :-).
- * 4. If you include any Windows specific code (or a derivative thereof) from 
- *    the apps directory (application code) you must include an acknowledgement:
- *    "This product includes software written by Tim Hudson (tjh@cryptsoft.com)"
- * 
- * THIS SOFTWARE IS PROVIDED BY ERIC YOUNG ``AS IS'' AND
- * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
- * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
- * ARE DISCLAIMED.  IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE
- * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
- * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
- * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
- * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
- * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
- * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
- * SUCH DAMAGE.
- * 
- * The licence and distribution terms for any publically available version or
- * derivative of this code cannot be changed.  i.e. this code cannot simply be
- * copied and put under another distribution licence
- * [including the GNU Public Licence.]
- */
-
-#include <stdio.h>
-#include "rmd_locl.h"
-#include <openssl/opensslv.h>
-
-const char RMD160_version[]="RIPE-MD160" OPENSSL_VERSION_PTEXT;
-
-#  ifdef RMD160_ASM
-     void ripemd160_block_x86(RIPEMD160_CTX *c, unsigned long *p,size_t num);
-#    define ripemd160_block ripemd160_block_x86
-#  else
-     void ripemd160_block(RIPEMD160_CTX *c, unsigned long *p,size_t num);
-#  endif
-
-int RIPEMD160_Init(RIPEMD160_CTX *c)
-	{
-	c->A=RIPEMD160_A;
-	c->B=RIPEMD160_B;
-	c->C=RIPEMD160_C;
-	c->D=RIPEMD160_D;
-	c->E=RIPEMD160_E;
-	c->Nl=0;
-	c->Nh=0;
-	c->num=0;
-	return 1;
-	}
-
-#ifndef ripemd160_block_host_order
-#ifdef X
-#undef X
-#endif
-#define X(i)	XX[i]
-void ripemd160_block_host_order (RIPEMD160_CTX *ctx, const void *p, size_t num)
-	{
-	const RIPEMD160_LONG *XX=p;
-	register unsigned MD32_REG_T A,B,C,D,E;
-	register unsigned MD32_REG_T a,b,c,d,e;
-
-	for (;num--;XX+=HASH_LBLOCK)
-		{
-
-	A=ctx->A; B=ctx->B; C=ctx->C; D=ctx->D; E=ctx->E;
-
-	RIP1(A,B,C,D,E,WL00,SL00);
-	RIP1(E,A,B,C,D,WL01,SL01);
-	RIP1(D,E,A,B,C,WL02,SL02);
-	RIP1(C,D,E,A,B,WL03,SL03);
-	RIP1(B,C,D,E,A,WL04,SL04);
-	RIP1(A,B,C,D,E,WL05,SL05);
-	RIP1(E,A,B,C,D,WL06,SL06);
-	RIP1(D,E,A,B,C,WL07,SL07);
-	RIP1(C,D,E,A,B,WL08,SL08);
-	RIP1(B,C,D,E,A,WL09,SL09);
-	RIP1(A,B,C,D,E,WL10,SL10);
-	RIP1(E,A,B,C,D,WL11,SL11);
-	RIP1(D,E,A,B,C,WL12,SL12);
-	RIP1(C,D,E,A,B,WL13,SL13);
-	RIP1(B,C,D,E,A,WL14,SL14);
-	RIP1(A,B,C,D,E,WL15,SL15);
-
-	RIP2(E,A,B,C,D,WL16,SL16,KL1);
-	RIP2(D,E,A,B,C,WL17,SL17,KL1);
-	RIP2(C,D,E,A,B,WL18,SL18,KL1);
-	RIP2(B,C,D,E,A,WL19,SL19,KL1);
-	RIP2(A,B,C,D,E,WL20,SL20,KL1);
-	RIP2(E,A,B,C,D,WL21,SL21,KL1);
-	RIP2(D,E,A,B,C,WL22,SL22,KL1);
-	RIP2(C,D,E,A,B,WL23,SL23,KL1);
-	RIP2(B,C,D,E,A,WL24,SL24,KL1);
-	RIP2(A,B,C,D,E,WL25,SL25,KL1);
-	RIP2(E,A,B,C,D,WL26,SL26,KL1);
-	RIP2(D,E,A,B,C,WL27,SL27,KL1);
-	RIP2(C,D,E,A,B,WL28,SL28,KL1);
-	RIP2(B,C,D,E,A,WL29,SL29,KL1);
-	RIP2(A,B,C,D,E,WL30,SL30,KL1);
-	RIP2(E,A,B,C,D,WL31,SL31,KL1);
-
-	RIP3(D,E,A,B,C,WL32,SL32,KL2);
-	RIP3(C,D,E,A,B,WL33,SL33,KL2);
-	RIP3(B,C,D,E,A,WL34,SL34,KL2);
-	RIP3(A,B,C,D,E,WL35,SL35,KL2);
-	RIP3(E,A,B,C,D,WL36,SL36,KL2);
-	RIP3(D,E,A,B,C,WL37,SL37,KL2);
-	RIP3(C,D,E,A,B,WL38,SL38,KL2);
-	RIP3(B,C,D,E,A,WL39,SL39,KL2);
-	RIP3(A,B,C,D,E,WL40,SL40,KL2);
-	RIP3(E,A,B,C,D,WL41,SL41,KL2);
-	RIP3(D,E,A,B,C,WL42,SL42,KL2);
-	RIP3(C,D,E,A,B,WL43,SL43,KL2);
-	RIP3(B,C,D,E,A,WL44,SL44,KL2);
-	RIP3(A,B,C,D,E,WL45,SL45,KL2);
-	RIP3(E,A,B,C,D,WL46,SL46,KL2);
-	RIP3(D,E,A,B,C,WL47,SL47,KL2);
-
-	RIP4(C,D,E,A,B,WL48,SL48,KL3);
-	RIP4(B,C,D,E,A,WL49,SL49,KL3);
-	RIP4(A,B,C,D,E,WL50,SL50,KL3);
-	RIP4(E,A,B,C,D,WL51,SL51,KL3);
-	RIP4(D,E,A,B,C,WL52,SL52,KL3);
-	RIP4(C,D,E,A,B,WL53,SL53,KL3);
-	RIP4(B,C,D,E,A,WL54,SL54,KL3);
-	RIP4(A,B,C,D,E,WL55,SL55,KL3);
-	RIP4(E,A,B,C,D,WL56,SL56,KL3);
-	RIP4(D,E,A,B,C,WL57,SL57,KL3);
-	RIP4(C,D,E,A,B,WL58,SL58,KL3);
-	RIP4(B,C,D,E,A,WL59,SL59,KL3);
-	RIP4(A,B,C,D,E,WL60,SL60,KL3);
-	RIP4(E,A,B,C,D,WL61,SL61,KL3);
-	RIP4(D,E,A,B,C,WL62,SL62,KL3);
-	RIP4(C,D,E,A,B,WL63,SL63,KL3);
-
-	RIP5(B,C,D,E,A,WL64,SL64,KL4);
-	RIP5(A,B,C,D,E,WL65,SL65,KL4);
-	RIP5(E,A,B,C,D,WL66,SL66,KL4);
-	RIP5(D,E,A,B,C,WL67,SL67,KL4);
-	RIP5(C,D,E,A,B,WL68,SL68,KL4);
-	RIP5(B,C,D,E,A,WL69,SL69,KL4);
-	RIP5(A,B,C,D,E,WL70,SL70,KL4);
-	RIP5(E,A,B,C,D,WL71,SL71,KL4);
-	RIP5(D,E,A,B,C,WL72,SL72,KL4);
-	RIP5(C,D,E,A,B,WL73,SL73,KL4);
-	RIP5(B,C,D,E,A,WL74,SL74,KL4);
-	RIP5(A,B,C,D,E,WL75,SL75,KL4);
-	RIP5(E,A,B,C,D,WL76,SL76,KL4);
-	RIP5(D,E,A,B,C,WL77,SL77,KL4);
-	RIP5(C,D,E,A,B,WL78,SL78,KL4);
-	RIP5(B,C,D,E,A,WL79,SL79,KL4);
-
-	a=A; b=B; c=C; d=D; e=E;
-	/* Do other half */
-	A=ctx->A; B=ctx->B; C=ctx->C; D=ctx->D; E=ctx->E;
-
-	RIP5(A,B,C,D,E,WR00,SR00,KR0);
-	RIP5(E,A,B,C,D,WR01,SR01,KR0);
-	RIP5(D,E,A,B,C,WR02,SR02,KR0);
-	RIP5(C,D,E,A,B,WR03,SR03,KR0);
-	RIP5(B,C,D,E,A,WR04,SR04,KR0);
-	RIP5(A,B,C,D,E,WR05,SR05,KR0);
-	RIP5(E,A,B,C,D,WR06,SR06,KR0);
-	RIP5(D,E,A,B,C,WR07,SR07,KR0);
-	RIP5(C,D,E,A,B,WR08,SR08,KR0);
-	RIP5(B,C,D,E,A,WR09,SR09,KR0);
-	RIP5(A,B,C,D,E,WR10,SR10,KR0);
-	RIP5(E,A,B,C,D,WR11,SR11,KR0);
-	RIP5(D,E,A,B,C,WR12,SR12,KR0);
-	RIP5(C,D,E,A,B,WR13,SR13,KR0);
-	RIP5(B,C,D,E,A,WR14,SR14,KR0);
-	RIP5(A,B,C,D,E,WR15,SR15,KR0);
-
-	RIP4(E,A,B,C,D,WR16,SR16,KR1);
-	RIP4(D,E,A,B,C,WR17,SR17,KR1);
-	RIP4(C,D,E,A,B,WR18,SR18,KR1);
-	RIP4(B,C,D,E,A,WR19,SR19,KR1);
-	RIP4(A,B,C,D,E,WR20,SR20,KR1);
-	RIP4(E,A,B,C,D,WR21,SR21,KR1);
-	RIP4(D,E,A,B,C,WR22,SR22,KR1);
-	RIP4(C,D,E,A,B,WR23,SR23,KR1);
-	RIP4(B,C,D,E,A,WR24,SR24,KR1);
-	RIP4(A,B,C,D,E,WR25,SR25,KR1);
-	RIP4(E,A,B,C,D,WR26,SR26,KR1);
-	RIP4(D,E,A,B,C,WR27,SR27,KR1);
-	RIP4(C,D,E,A,B,WR28,SR28,KR1);
-	RIP4(B,C,D,E,A,WR29,SR29,KR1);
-	RIP4(A,B,C,D,E,WR30,SR30,KR1);
-	RIP4(E,A,B,C,D,WR31,SR31,KR1);
-
-	RIP3(D,E,A,B,C,WR32,SR32,KR2);
-	RIP3(C,D,E,A,B,WR33,SR33,KR2);
-	RIP3(B,C,D,E,A,WR34,SR34,KR2);
-	RIP3(A,B,C,D,E,WR35,SR35,KR2);
-	RIP3(E,A,B,C,D,WR36,SR36,KR2);
-	RIP3(D,E,A,B,C,WR37,SR37,KR2);
-	RIP3(C,D,E,A,B,WR38,SR38,KR2);
-	RIP3(B,C,D,E,A,WR39,SR39,KR2);
-	RIP3(A,B,C,D,E,WR40,SR40,KR2);
-	RIP3(E,A,B,C,D,WR41,SR41,KR2);
-	RIP3(D,E,A,B,C,WR42,SR42,KR2);
-	RIP3(C,D,E,A,B,WR43,SR43,KR2);
-	RIP3(B,C,D,E,A,WR44,SR44,KR2);
-	RIP3(A,B,C,D,E,WR45,SR45,KR2);
-	RIP3(E,A,B,C,D,WR46,SR46,KR2);
-	RIP3(D,E,A,B,C,WR47,SR47,KR2);
-
-	RIP2(C,D,E,A,B,WR48,SR48,KR3);
-	RIP2(B,C,D,E,A,WR49,SR49,KR3);
-	RIP2(A,B,C,D,E,WR50,SR50,KR3);
-	RIP2(E,A,B,C,D,WR51,SR51,KR3);
-	RIP2(D,E,A,B,C,WR52,SR52,KR3);
-	RIP2(C,D,E,A,B,WR53,SR53,KR3);
-	RIP2(B,C,D,E,A,WR54,SR54,KR3);
-	RIP2(A,B,C,D,E,WR55,SR55,KR3);
-	RIP2(E,A,B,C,D,WR56,SR56,KR3);
-	RIP2(D,E,A,B,C,WR57,SR57,KR3);
-	RIP2(C,D,E,A,B,WR58,SR58,KR3);
-	RIP2(B,C,D,E,A,WR59,SR59,KR3);
-	RIP2(A,B,C,D,E,WR60,SR60,KR3);
-	RIP2(E,A,B,C,D,WR61,SR61,KR3);
-	RIP2(D,E,A,B,C,WR62,SR62,KR3);
-	RIP2(C,D,E,A,B,WR63,SR63,KR3);
-
-	RIP1(B,C,D,E,A,WR64,SR64);
-	RIP1(A,B,C,D,E,WR65,SR65);
-	RIP1(E,A,B,C,D,WR66,SR66);
-	RIP1(D,E,A,B,C,WR67,SR67);
-	RIP1(C,D,E,A,B,WR68,SR68);
-	RIP1(B,C,D,E,A,WR69,SR69);
-	RIP1(A,B,C,D,E,WR70,SR70);
-	RIP1(E,A,B,C,D,WR71,SR71);
-	RIP1(D,E,A,B,C,WR72,SR72);
-	RIP1(C,D,E,A,B,WR73,SR73);
-	RIP1(B,C,D,E,A,WR74,SR74);
-	RIP1(A,B,C,D,E,WR75,SR75);
-	RIP1(E,A,B,C,D,WR76,SR76);
-	RIP1(D,E,A,B,C,WR77,SR77);
-	RIP1(C,D,E,A,B,WR78,SR78);
-	RIP1(B,C,D,E,A,WR79,SR79);
-
-	D     =ctx->B+c+D;
-	ctx->B=ctx->C+d+E;
-	ctx->C=ctx->D+e+A;
-	ctx->D=ctx->E+a+B;
-	ctx->E=ctx->A+b+C;
-	ctx->A=D;
-
-		}
-	}
-#endif
-
-#ifndef ripemd160_block_data_order
-#ifdef X
-#undef X
-#endif
-void ripemd160_block_data_order (RIPEMD160_CTX *ctx, const void *p, size_t num)
-	{
-	const unsigned char *data=p;
-	register unsigned MD32_REG_T A,B,C,D,E;
-	unsigned MD32_REG_T a,b,c,d,e,l;
-#ifndef MD32_XARRAY
-	/* See comment in crypto/sha/sha_locl.h for details. */
-	unsigned MD32_REG_T	XX0, XX1, XX2, XX3, XX4, XX5, XX6, XX7,
-				XX8, XX9,XX10,XX11,XX12,XX13,XX14,XX15;
-# define X(i)	XX##i
-#else
-	RIPEMD160_LONG	XX[16];
-# define X(i)	XX[i]
-#endif
-
-	for (;num--;)
-		{
-
-	A=ctx->A; B=ctx->B; C=ctx->C; D=ctx->D; E=ctx->E;
-
-	HOST_c2l(data,l); X( 0)=l;	HOST_c2l(data,l); X( 1)=l;
-	RIP1(A,B,C,D,E,WL00,SL00);	HOST_c2l(data,l); X( 2)=l;
-	RIP1(E,A,B,C,D,WL01,SL01);	HOST_c2l(data,l); X( 3)=l;
-	RIP1(D,E,A,B,C,WL02,SL02);	HOST_c2l(data,l); X( 4)=l;
-	RIP1(C,D,E,A,B,WL03,SL03);	HOST_c2l(data,l); X( 5)=l;
-	RIP1(B,C,D,E,A,WL04,SL04);	HOST_c2l(data,l); X( 6)=l;
-	RIP1(A,B,C,D,E,WL05,SL05);	HOST_c2l(data,l); X( 7)=l;
-	RIP1(E,A,B,C,D,WL06,SL06);	HOST_c2l(data,l); X( 8)=l;
-	RIP1(D,E,A,B,C,WL07,SL07);	HOST_c2l(data,l); X( 9)=l;
-	RIP1(C,D,E,A,B,WL08,SL08);	HOST_c2l(data,l); X(10)=l;
-	RIP1(B,C,D,E,A,WL09,SL09);	HOST_c2l(data,l); X(11)=l;
-	RIP1(A,B,C,D,E,WL10,SL10);	HOST_c2l(data,l); X(12)=l;
-	RIP1(E,A,B,C,D,WL11,SL11);	HOST_c2l(data,l); X(13)=l;
-	RIP1(D,E,A,B,C,WL12,SL12);	HOST_c2l(data,l); X(14)=l;
-	RIP1(C,D,E,A,B,WL13,SL13);	HOST_c2l(data,l); X(15)=l;
-	RIP1(B,C,D,E,A,WL14,SL14);
-	RIP1(A,B,C,D,E,WL15,SL15);
-
-	RIP2(E,A,B,C,D,WL16,SL16,KL1);
-	RIP2(D,E,A,B,C,WL17,SL17,KL1);
-	RIP2(C,D,E,A,B,WL18,SL18,KL1);
-	RIP2(B,C,D,E,A,WL19,SL19,KL1);
-	RIP2(A,B,C,D,E,WL20,SL20,KL1);
-	RIP2(E,A,B,C,D,WL21,SL21,KL1);
-	RIP2(D,E,A,B,C,WL22,SL22,KL1);
-	RIP2(C,D,E,A,B,WL23,SL23,KL1);
-	RIP2(B,C,D,E,A,WL24,SL24,KL1);
-	RIP2(A,B,C,D,E,WL25,SL25,KL1);
-	RIP2(E,A,B,C,D,WL26,SL26,KL1);
-	RIP2(D,E,A,B,C,WL27,SL27,KL1);
-	RIP2(C,D,E,A,B,WL28,SL28,KL1);
-	RIP2(B,C,D,E,A,WL29,SL29,KL1);
-	RIP2(A,B,C,D,E,WL30,SL30,KL1);
-	RIP2(E,A,B,C,D,WL31,SL31,KL1);
-
-	RIP3(D,E,A,B,C,WL32,SL32,KL2);
-	RIP3(C,D,E,A,B,WL33,SL33,KL2);
-	RIP3(B,C,D,E,A,WL34,SL34,KL2);
-	RIP3(A,B,C,D,E,WL35,SL35,KL2);
-	RIP3(E,A,B,C,D,WL36,SL36,KL2);
-	RIP3(D,E,A,B,C,WL37,SL37,KL2);
-	RIP3(C,D,E,A,B,WL38,SL38,KL2);
-	RIP3(B,C,D,E,A,WL39,SL39,KL2);
-	RIP3(A,B,C,D,E,WL40,SL40,KL2);
-	RIP3(E,A,B,C,D,WL41,SL41,KL2);
-	RIP3(D,E,A,B,C,WL42,SL42,KL2);
-	RIP3(C,D,E,A,B,WL43,SL43,KL2);
-	RIP3(B,C,D,E,A,WL44,SL44,KL2);
-	RIP3(A,B,C,D,E,WL45,SL45,KL2);
-	RIP3(E,A,B,C,D,WL46,SL46,KL2);
-	RIP3(D,E,A,B,C,WL47,SL47,KL2);
-
-	RIP4(C,D,E,A,B,WL48,SL48,KL3);
-	RIP4(B,C,D,E,A,WL49,SL49,KL3);
-	RIP4(A,B,C,D,E,WL50,SL50,KL3);
-	RIP4(E,A,B,C,D,WL51,SL51,KL3);
-	RIP4(D,E,A,B,C,WL52,SL52,KL3);
-	RIP4(C,D,E,A,B,WL53,SL53,KL3);
-	RIP4(B,C,D,E,A,WL54,SL54,KL3);
-	RIP4(A,B,C,D,E,WL55,SL55,KL3);
-	RIP4(E,A,B,C,D,WL56,SL56,KL3);
-	RIP4(D,E,A,B,C,WL57,SL57,KL3);
-	RIP4(C,D,E,A,B,WL58,SL58,KL3);
-	RIP4(B,C,D,E,A,WL59,SL59,KL3);
-	RIP4(A,B,C,D,E,WL60,SL60,KL3);
-	RIP4(E,A,B,C,D,WL61,SL61,KL3);
-	RIP4(D,E,A,B,C,WL62,SL62,KL3);
-	RIP4(C,D,E,A,B,WL63,SL63,KL3);
-
-	RIP5(B,C,D,E,A,WL64,SL64,KL4);
-	RIP5(A,B,C,D,E,WL65,SL65,KL4);
-	RIP5(E,A,B,C,D,WL66,SL66,KL4);
-	RIP5(D,E,A,B,C,WL67,SL67,KL4);
-	RIP5(C,D,E,A,B,WL68,SL68,KL4);
-	RIP5(B,C,D,E,A,WL69,SL69,KL4);
-	RIP5(A,B,C,D,E,WL70,SL70,KL4);
-	RIP5(E,A,B,C,D,WL71,SL71,KL4);
-	RIP5(D,E,A,B,C,WL72,SL72,KL4);
-	RIP5(C,D,E,A,B,WL73,SL73,KL4);
-	RIP5(B,C,D,E,A,WL74,SL74,KL4);
-	RIP5(A,B,C,D,E,WL75,SL75,KL4);
-	RIP5(E,A,B,C,D,WL76,SL76,KL4);
-	RIP5(D,E,A,B,C,WL77,SL77,KL4);
-	RIP5(C,D,E,A,B,WL78,SL78,KL4);
-	RIP5(B,C,D,E,A,WL79,SL79,KL4);
-
-	a=A; b=B; c=C; d=D; e=E;
-	/* Do other half */
-	A=ctx->A; B=ctx->B; C=ctx->C; D=ctx->D; E=ctx->E;
-
-	RIP5(A,B,C,D,E,WR00,SR00,KR0);
-	RIP5(E,A,B,C,D,WR01,SR01,KR0);
-	RIP5(D,E,A,B,C,WR02,SR02,KR0);
-	RIP5(C,D,E,A,B,WR03,SR03,KR0);
-	RIP5(B,C,D,E,A,WR04,SR04,KR0);
-	RIP5(A,B,C,D,E,WR05,SR05,KR0);
-	RIP5(E,A,B,C,D,WR06,SR06,KR0);
-	RIP5(D,E,A,B,C,WR07,SR07,KR0);
-	RIP5(C,D,E,A,B,WR08,SR08,KR0);
-	RIP5(B,C,D,E,A,WR09,SR09,KR0);
-	RIP5(A,B,C,D,E,WR10,SR10,KR0);
-	RIP5(E,A,B,C,D,WR11,SR11,KR0);
-	RIP5(D,E,A,B,C,WR12,SR12,KR0);
-	RIP5(C,D,E,A,B,WR13,SR13,KR0);
-	RIP5(B,C,D,E,A,WR14,SR14,KR0);
-	RIP5(A,B,C,D,E,WR15,SR15,KR0);
-
-	RIP4(E,A,B,C,D,WR16,SR16,KR1);
-	RIP4(D,E,A,B,C,WR17,SR17,KR1);
-	RIP4(C,D,E,A,B,WR18,SR18,KR1);
-	RIP4(B,C,D,E,A,WR19,SR19,KR1);
-	RIP4(A,B,C,D,E,WR20,SR20,KR1);
-	RIP4(E,A,B,C,D,WR21,SR21,KR1);
-	RIP4(D,E,A,B,C,WR22,SR22,KR1);
-	RIP4(C,D,E,A,B,WR23,SR23,KR1);
-	RIP4(B,C,D,E,A,WR24,SR24,KR1);
-	RIP4(A,B,C,D,E,WR25,SR25,KR1);
-	RIP4(E,A,B,C,D,WR26,SR26,KR1);
-	RIP4(D,E,A,B,C,WR27,SR27,KR1);
-	RIP4(C,D,E,A,B,WR28,SR28,KR1);
-	RIP4(B,C,D,E,A,WR29,SR29,KR1);
-	RIP4(A,B,C,D,E,WR30,SR30,KR1);
-	RIP4(E,A,B,C,D,WR31,SR31,KR1);
-
-	RIP3(D,E,A,B,C,WR32,SR32,KR2);
-	RIP3(C,D,E,A,B,WR33,SR33,KR2);
-	RIP3(B,C,D,E,A,WR34,SR34,KR2);
-	RIP3(A,B,C,D,E,WR35,SR35,KR2);
-	RIP3(E,A,B,C,D,WR36,SR36,KR2);
-	RIP3(D,E,A,B,C,WR37,SR37,KR2);
-	RIP3(C,D,E,A,B,WR38,SR38,KR2);
-	RIP3(B,C,D,E,A,WR39,SR39,KR2);
-	RIP3(A,B,C,D,E,WR40,SR40,KR2);
-	RIP3(E,A,B,C,D,WR41,SR41,KR2);
-	RIP3(D,E,A,B,C,WR42,SR42,KR2);
-	RIP3(C,D,E,A,B,WR43,SR43,KR2);
-	RIP3(B,C,D,E,A,WR44,SR44,KR2);
-	RIP3(A,B,C,D,E,WR45,SR45,KR2);
-	RIP3(E,A,B,C,D,WR46,SR46,KR2);
-	RIP3(D,E,A,B,C,WR47,SR47,KR2);
-
-	RIP2(C,D,E,A,B,WR48,SR48,KR3);
-	RIP2(B,C,D,E,A,WR49,SR49,KR3);
-	RIP2(A,B,C,D,E,WR50,SR50,KR3);
-	RIP2(E,A,B,C,D,WR51,SR51,KR3);
-	RIP2(D,E,A,B,C,WR52,SR52,KR3);
-	RIP2(C,D,E,A,B,WR53,SR53,KR3);
-	RIP2(B,C,D,E,A,WR54,SR54,KR3);
-	RIP2(A,B,C,D,E,WR55,SR55,KR3);
-	RIP2(E,A,B,C,D,WR56,SR56,KR3);
-	RIP2(D,E,A,B,C,WR57,SR57,KR3);
-	RIP2(C,D,E,A,B,WR58,SR58,KR3);
-	RIP2(B,C,D,E,A,WR59,SR59,KR3);
-	RIP2(A,B,C,D,E,WR60,SR60,KR3);
-	RIP2(E,A,B,C,D,WR61,SR61,KR3);
-	RIP2(D,E,A,B,C,WR62,SR62,KR3);
-	RIP2(C,D,E,A,B,WR63,SR63,KR3);
-
-	RIP1(B,C,D,E,A,WR64,SR64);
-	RIP1(A,B,C,D,E,WR65,SR65);
-	RIP1(E,A,B,C,D,WR66,SR66);
-	RIP1(D,E,A,B,C,WR67,SR67);
-	RIP1(C,D,E,A,B,WR68,SR68);
-	RIP1(B,C,D,E,A,WR69,SR69);
-	RIP1(A,B,C,D,E,WR70,SR70);
-	RIP1(E,A,B,C,D,WR71,SR71);
-	RIP1(D,E,A,B,C,WR72,SR72);
-	RIP1(C,D,E,A,B,WR73,SR73);
-	RIP1(B,C,D,E,A,WR74,SR74);
-	RIP1(A,B,C,D,E,WR75,SR75);
-	RIP1(E,A,B,C,D,WR76,SR76);
-	RIP1(D,E,A,B,C,WR77,SR77);
-	RIP1(C,D,E,A,B,WR78,SR78);
-	RIP1(B,C,D,E,A,WR79,SR79);
-
-	D     =ctx->B+c+D;
-	ctx->B=ctx->C+d+E;
-	ctx->C=ctx->D+e+A;
-	ctx->D=ctx->E+a+B;
-	ctx->E=ctx->A+b+C;
-	ctx->A=D;
-
-		}
-	}
-#endif
diff --git a/crypto/openssl/crypto/ripemd/rmd_locl.h b/crypto/openssl/crypto/ripemd/rmd_locl.h
deleted file mode 100644
index b52d7861654c..000000000000
--- a/crypto/openssl/crypto/ripemd/rmd_locl.h
+++ /dev/null
@@ -1,164 +0,0 @@
-/* crypto/ripemd/rmd_locl.h */
-/* Copyright (C) 1995-1998 Eric Young (eay@cryptsoft.com)
- * All rights reserved.
- *
- * This package is an SSL implementation written
- * by Eric Young (eay@cryptsoft.com).
- * The implementation was written so as to conform with Netscapes SSL.
- * 
- * This library is free for commercial and non-commercial use as long as
- * the following conditions are aheared to.  The following conditions
- * apply to all code found in this distribution, be it the RC4, RSA,
- * lhash, DES, etc., code; not just the SSL code.  The SSL documentation
- * included with this distribution is covered by the same copyright terms
- * except that the holder is Tim Hudson (tjh@cryptsoft.com).
- * 
- * Copyright remains Eric Young's, and as such any Copyright notices in
- * the code are not to be removed.
- * If this package is used in a product, Eric Young should be given attribution
- * as the author of the parts of the library used.
- * This can be in the form of a textual message at program startup or
- * in documentation (online or textual) provided with the package.
- * 
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions
- * are met:
- * 1. Redistributions of source code must retain the copyright
- *    notice, this list of conditions and the following disclaimer.
- * 2. Redistributions in binary form must reproduce the above copyright
- *    notice, this list of conditions and the following disclaimer in the
- *    documentation and/or other materials provided with the distribution.
- * 3. All advertising materials mentioning features or use of this software
- *    must display the following acknowledgement:
- *    "This product includes cryptographic software written by
- *     Eric Young (eay@cryptsoft.com)"
- *    The word 'cryptographic' can be left out if the rouines from the library
- *    being used are not cryptographic related :-).
- * 4. If you include any Windows specific code (or a derivative thereof) from 
- *    the apps directory (application code) you must include an acknowledgement:
- *    "This product includes software written by Tim Hudson (tjh@cryptsoft.com)"
- * 
- * THIS SOFTWARE IS PROVIDED BY ERIC YOUNG ``AS IS'' AND
- * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
- * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
- * ARE DISCLAIMED.  IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE
- * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
- * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
- * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
- * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
- * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
- * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
- * SUCH DAMAGE.
- * 
- * The licence and distribution terms for any publically available version or
- * derivative of this code cannot be changed.  i.e. this code cannot simply be
- * copied and put under another distribution licence
- * [including the GNU Public Licence.]
- */
-
-#include <stdlib.h>
-#include <string.h>
-#include <openssl/opensslconf.h>
-#include <openssl/ripemd.h>
-
-#ifndef RIPEMD160_LONG_LOG2
-#define RIPEMD160_LONG_LOG2 2 /* default to 32 bits */
-#endif
-
-/*
- * DO EXAMINE COMMENTS IN crypto/md5/md5_locl.h & crypto/md5/md5_dgst.c
- * FOR EXPLANATIONS ON FOLLOWING "CODE."
- *					<appro@fy.chalmers.se>
- */
-#ifdef RMD160_ASM
-# if defined(__i386) || defined(__i386__) || defined(_M_IX86) || defined(__INTEL__)
-#  if !defined(B_ENDIAN)
-#   define ripemd160_block_host_order ripemd160_block_asm_host_order
-#  endif
-# endif
-#endif
-
-void ripemd160_block_host_order (RIPEMD160_CTX *c, const void *p,size_t num);
-void ripemd160_block_data_order (RIPEMD160_CTX *c, const void *p,size_t num);
-
-#if defined(__i386) || defined(__i386__) || defined(_M_IX86) || defined(__INTEL__)
-# if !defined(B_ENDIAN)
-#  define ripemd160_block_data_order ripemd160_block_host_order
-# endif
-#endif
-
-#define DATA_ORDER_IS_LITTLE_ENDIAN
-
-#define HASH_LONG               RIPEMD160_LONG
-#define HASH_LONG_LOG2          RIPEMD160_LONG_LOG2
-#define HASH_CTX                RIPEMD160_CTX
-#define HASH_CBLOCK             RIPEMD160_CBLOCK
-#define HASH_LBLOCK             RIPEMD160_LBLOCK
-#define HASH_UPDATE             RIPEMD160_Update
-#define HASH_TRANSFORM          RIPEMD160_Transform
-#define HASH_FINAL              RIPEMD160_Final
-#define HASH_BLOCK_HOST_ORDER   ripemd160_block_host_order
-#define	HASH_MAKE_STRING(c,s)	do {	\
-	unsigned long ll;		\
-	ll=(c)->A; HOST_l2c(ll,(s));	\
-	ll=(c)->B; HOST_l2c(ll,(s));	\
-	ll=(c)->C; HOST_l2c(ll,(s));	\
-	ll=(c)->D; HOST_l2c(ll,(s));	\
-	ll=(c)->E; HOST_l2c(ll,(s));	\
-	} while (0)
-#if !defined(L_ENDIAN) || defined(ripemd160_block_data_order)
-#define HASH_BLOCK_DATA_ORDER   ripemd160_block_data_order
-#endif
-
-#include "md32_common.h"
-
-#if 0
-#define F1(x,y,z)	 ((x)^(y)^(z))
-#define F2(x,y,z)	(((x)&(y))|((~x)&z))
-#define F3(x,y,z)	(((x)|(~y))^(z))
-#define F4(x,y,z)	(((x)&(z))|((y)&(~(z))))
-#define F5(x,y,z)	 ((x)^((y)|(~(z))))
-#else
-/*
- * Transformed F2 and F4 are courtesy of Wei Dai <weidai@eskimo.com>
- */
-#define F1(x,y,z)	((x) ^ (y) ^ (z))
-#define F2(x,y,z)	((((y) ^ (z)) & (x)) ^ (z))
-#define F3(x,y,z)	(((~(y)) | (x)) ^ (z))
-#define F4(x,y,z)	((((x) ^ (y)) & (z)) ^ (y))
-#define F5(x,y,z)	(((~(z)) | (y)) ^ (x))
-#endif
-
-#define RIPEMD160_A	0x67452301L
-#define RIPEMD160_B	0xEFCDAB89L
-#define RIPEMD160_C	0x98BADCFEL
-#define RIPEMD160_D	0x10325476L
-#define RIPEMD160_E	0xC3D2E1F0L
-
-#include "rmdconst.h"
-
-#define RIP1(a,b,c,d,e,w,s) { \
-	a+=F1(b,c,d)+X(w); \
-        a=ROTATE(a,s)+e; \
-        c=ROTATE(c,10); }
-
-#define RIP2(a,b,c,d,e,w,s,K) { \
-	a+=F2(b,c,d)+X(w)+K; \
-        a=ROTATE(a,s)+e; \
-        c=ROTATE(c,10); }
-
-#define RIP3(a,b,c,d,e,w,s,K) { \
-	a+=F3(b,c,d)+X(w)+K; \
-        a=ROTATE(a,s)+e; \
-        c=ROTATE(c,10); }
-
-#define RIP4(a,b,c,d,e,w,s,K) { \
-	a+=F4(b,c,d)+X(w)+K; \
-        a=ROTATE(a,s)+e; \
-        c=ROTATE(c,10); }
-
-#define RIP5(a,b,c,d,e,w,s,K) { \
-	a+=F5(b,c,d)+X(w)+K; \
-        a=ROTATE(a,s)+e; \
-        c=ROTATE(c,10); }
-
diff --git a/crypto/openssl/crypto/ripemd/rmd_one.c b/crypto/openssl/crypto/ripemd/rmd_one.c
deleted file mode 100644
index 3efb13758f66..000000000000
--- a/crypto/openssl/crypto/ripemd/rmd_one.c
+++ /dev/null
@@ -1,78 +0,0 @@
-/* crypto/ripemd/rmd_one.c */
-/* Copyright (C) 1995-1998 Eric Young (eay@cryptsoft.com)
- * All rights reserved.
- *
- * This package is an SSL implementation written
- * by Eric Young (eay@cryptsoft.com).
- * The implementation was written so as to conform with Netscapes SSL.
- * 
- * This library is free for commercial and non-commercial use as long as
- * the following conditions are aheared to.  The following conditions
- * apply to all code found in this distribution, be it the RC4, RSA,
- * lhash, DES, etc., code; not just the SSL code.  The SSL documentation
- * included with this distribution is covered by the same copyright terms
- * except that the holder is Tim Hudson (tjh@cryptsoft.com).
- * 
- * Copyright remains Eric Young's, and as such any Copyright notices in
- * the code are not to be removed.
- * If this package is used in a product, Eric Young should be given attribution
- * as the author of the parts of the library used.
- * This can be in the form of a textual message at program startup or
- * in documentation (online or textual) provided with the package.
- * 
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions
- * are met:
- * 1. Redistributions of source code must retain the copyright
- *    notice, this list of conditions and the following disclaimer.
- * 2. Redistributions in binary form must reproduce the above copyright
- *    notice, this list of conditions and the following disclaimer in the
- *    documentation and/or other materials provided with the distribution.
- * 3. All advertising materials mentioning features or use of this software
- *    must display the following acknowledgement:
- *    "This product includes cryptographic software written by
- *     Eric Young (eay@cryptsoft.com)"
- *    The word 'cryptographic' can be left out if the rouines from the library
- *    being used are not cryptographic related :-).
- * 4. If you include any Windows specific code (or a derivative thereof) from 
- *    the apps directory (application code) you must include an acknowledgement:
- *    "This product includes software written by Tim Hudson (tjh@cryptsoft.com)"
- * 
- * THIS SOFTWARE IS PROVIDED BY ERIC YOUNG ``AS IS'' AND
- * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
- * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
- * ARE DISCLAIMED.  IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE
- * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
- * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
- * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
- * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
- * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
- * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
- * SUCH DAMAGE.
- * 
- * The licence and distribution terms for any publically available version or
- * derivative of this code cannot be changed.  i.e. this code cannot simply be
- * copied and put under another distribution licence
- * [including the GNU Public Licence.]
- */
-
-#include <stdio.h>
-#include <string.h>
-#include <openssl/ripemd.h>
-#include <openssl/crypto.h>
-
-unsigned char *RIPEMD160(const unsigned char *d, size_t n,
-	     unsigned char *md)
-	{
-	RIPEMD160_CTX c;
-	static unsigned char m[RIPEMD160_DIGEST_LENGTH];
-
-	if (md == NULL) md=m;
-	if (!RIPEMD160_Init(&c))
-		return NULL;
-	RIPEMD160_Update(&c,d,n);
-	RIPEMD160_Final(md,&c);
-	OPENSSL_cleanse(&c,sizeof(c)); /* security consideration */
-	return(md);
-	}
-
diff --git a/crypto/openssl/crypto/ripemd/rmdconst.h b/crypto/openssl/crypto/ripemd/rmdconst.h
deleted file mode 100644
index 59c48dead1ba..000000000000
--- a/crypto/openssl/crypto/ripemd/rmdconst.h
+++ /dev/null
@@ -1,399 +0,0 @@
-/* crypto/ripemd/rmdconst.h */
-/* Copyright (C) 1995-1998 Eric Young (eay@cryptsoft.com)
- * All rights reserved.
- *
- * This package is an SSL implementation written
- * by Eric Young (eay@cryptsoft.com).
- * The implementation was written so as to conform with Netscapes SSL.
- * 
- * This library is free for commercial and non-commercial use as long as
- * the following conditions are aheared to.  The following conditions
- * apply to all code found in this distribution, be it the RC4, RSA,
- * lhash, DES, etc., code; not just the SSL code.  The SSL documentation
- * included with this distribution is covered by the same copyright terms
- * except that the holder is Tim Hudson (tjh@cryptsoft.com).
- * 
- * Copyright remains Eric Young's, and as such any Copyright notices in
- * the code are not to be removed.
- * If this package is used in a product, Eric Young should be given attribution
- * as the author of the parts of the library used.
- * This can be in the form of a textual message at program startup or
- * in documentation (online or textual) provided with the package.
- * 
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions
- * are met:
- * 1. Redistributions of source code must retain the copyright
- *    notice, this list of conditions and the following disclaimer.
- * 2. Redistributions in binary form must reproduce the above copyright
- *    notice, this list of conditions and the following disclaimer in the
- *    documentation and/or other materials provided with the distribution.
- * 3. All advertising materials mentioning features or use of this software
- *    must display the following acknowledgement:
- *    "This product includes cryptographic software written by
- *     Eric Young (eay@cryptsoft.com)"
- *    The word 'cryptographic' can be left out if the rouines from the library
- *    being used are not cryptographic related :-).
- * 4. If you include any Windows specific code (or a derivative thereof) from 
- *    the apps directory (application code) you must include an acknowledgement:
- *    "This product includes software written by Tim Hudson (tjh@cryptsoft.com)"
- * 
- * THIS SOFTWARE IS PROVIDED BY ERIC YOUNG ``AS IS'' AND
- * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
- * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
- * ARE DISCLAIMED.  IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE
- * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
- * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
- * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
- * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
- * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
- * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
- * SUCH DAMAGE.
- * 
- * The licence and distribution terms for any publically available version or
- * derivative of this code cannot be changed.  i.e. this code cannot simply be
- * copied and put under another distribution licence
- * [including the GNU Public Licence.]
- */
-#define KL0 0x00000000L
-#define KL1 0x5A827999L
-#define KL2 0x6ED9EBA1L
-#define KL3 0x8F1BBCDCL
-#define KL4 0xA953FD4EL
-
-#define KR0 0x50A28BE6L
-#define KR1 0x5C4DD124L
-#define KR2 0x6D703EF3L
-#define KR3 0x7A6D76E9L
-#define KR4 0x00000000L
-
-#define WL00  0
-#define SL00 11
-#define WL01  1
-#define SL01 14
-#define WL02  2
-#define SL02 15
-#define WL03  3
-#define SL03 12
-#define WL04  4
-#define SL04  5
-#define WL05  5
-#define SL05  8
-#define WL06  6
-#define SL06  7
-#define WL07  7
-#define SL07  9
-#define WL08  8
-#define SL08 11
-#define WL09  9
-#define SL09 13
-#define WL10 10
-#define SL10 14
-#define WL11 11
-#define SL11 15
-#define WL12 12
-#define SL12  6
-#define WL13 13
-#define SL13  7
-#define WL14 14
-#define SL14  9
-#define WL15 15
-#define SL15  8
-
-#define WL16  7
-#define SL16  7
-#define WL17  4
-#define SL17  6
-#define WL18 13
-#define SL18  8
-#define WL19  1
-#define SL19 13
-#define WL20 10
-#define SL20 11
-#define WL21  6
-#define SL21  9
-#define WL22 15
-#define SL22  7
-#define WL23  3
-#define SL23 15
-#define WL24 12
-#define SL24  7
-#define WL25  0
-#define SL25 12
-#define WL26  9
-#define SL26 15
-#define WL27  5
-#define SL27  9
-#define WL28  2
-#define SL28 11
-#define WL29 14
-#define SL29  7
-#define WL30 11
-#define SL30 13
-#define WL31  8
-#define SL31 12
-
-#define WL32  3
-#define SL32 11
-#define WL33 10
-#define SL33 13
-#define WL34 14
-#define SL34  6
-#define WL35  4
-#define SL35  7
-#define WL36  9
-#define SL36 14
-#define WL37 15
-#define SL37  9
-#define WL38  8
-#define SL38 13
-#define WL39  1
-#define SL39 15
-#define WL40  2
-#define SL40 14
-#define WL41  7
-#define SL41  8
-#define WL42  0
-#define SL42 13
-#define WL43  6
-#define SL43  6
-#define WL44 13
-#define SL44  5
-#define WL45 11
-#define SL45 12
-#define WL46  5
-#define SL46  7
-#define WL47 12
-#define SL47  5
-
-#define WL48  1
-#define SL48 11
-#define WL49  9
-#define SL49 12
-#define WL50 11
-#define SL50 14
-#define WL51 10
-#define SL51 15
-#define WL52  0
-#define SL52 14
-#define WL53  8
-#define SL53 15
-#define WL54 12
-#define SL54  9
-#define WL55  4
-#define SL55  8
-#define WL56 13
-#define SL56  9
-#define WL57  3
-#define SL57 14
-#define WL58  7
-#define SL58  5
-#define WL59 15
-#define SL59  6
-#define WL60 14
-#define SL60  8
-#define WL61  5
-#define SL61  6
-#define WL62  6
-#define SL62  5
-#define WL63  2
-#define SL63 12
-
-#define WL64  4
-#define SL64  9
-#define WL65  0
-#define SL65 15
-#define WL66  5
-#define SL66  5
-#define WL67  9
-#define SL67 11
-#define WL68  7
-#define SL68  6
-#define WL69 12
-#define SL69  8
-#define WL70  2
-#define SL70 13
-#define WL71 10
-#define SL71 12
-#define WL72 14
-#define SL72  5
-#define WL73  1
-#define SL73 12
-#define WL74  3
-#define SL74 13
-#define WL75  8
-#define SL75 14
-#define WL76 11
-#define SL76 11
-#define WL77  6
-#define SL77  8
-#define WL78 15
-#define SL78  5
-#define WL79 13
-#define SL79  6
-
-#define WR00  5
-#define SR00  8
-#define WR01 14
-#define SR01  9
-#define WR02  7
-#define SR02  9
-#define WR03  0
-#define SR03 11
-#define WR04  9
-#define SR04 13
-#define WR05  2
-#define SR05 15
-#define WR06 11
-#define SR06 15
-#define WR07  4
-#define SR07  5
-#define WR08 13
-#define SR08  7
-#define WR09  6
-#define SR09  7
-#define WR10 15
-#define SR10  8
-#define WR11  8
-#define SR11 11
-#define WR12  1
-#define SR12 14
-#define WR13 10
-#define SR13 14
-#define WR14  3
-#define SR14 12
-#define WR15 12
-#define SR15  6
-
-#define WR16  6
-#define SR16  9
-#define WR17 11
-#define SR17 13
-#define WR18  3
-#define SR18 15
-#define WR19  7
-#define SR19  7
-#define WR20  0
-#define SR20 12
-#define WR21 13
-#define SR21  8
-#define WR22  5
-#define SR22  9
-#define WR23 10
-#define SR23 11
-#define WR24 14
-#define SR24  7
-#define WR25 15
-#define SR25  7
-#define WR26  8
-#define SR26 12
-#define WR27 12
-#define SR27  7
-#define WR28  4
-#define SR28  6
-#define WR29  9
-#define SR29 15
-#define WR30  1
-#define SR30 13
-#define WR31  2
-#define SR31 11
-
-#define WR32 15
-#define SR32  9
-#define WR33  5
-#define SR33  7
-#define WR34  1
-#define SR34 15
-#define WR35  3
-#define SR35 11
-#define WR36  7
-#define SR36  8
-#define WR37 14
-#define SR37  6
-#define WR38  6
-#define SR38  6
-#define WR39  9
-#define SR39 14
-#define WR40 11
-#define SR40 12
-#define WR41  8
-#define SR41 13
-#define WR42 12
-#define SR42  5
-#define WR43  2
-#define SR43 14
-#define WR44 10
-#define SR44 13
-#define WR45  0
-#define SR45 13
-#define WR46  4
-#define SR46  7
-#define WR47 13
-#define SR47  5
-
-#define WR48  8
-#define SR48 15
-#define WR49  6
-#define SR49  5
-#define WR50  4
-#define SR50  8
-#define WR51  1
-#define SR51 11
-#define WR52  3
-#define SR52 14
-#define WR53 11
-#define SR53 14
-#define WR54 15
-#define SR54  6
-#define WR55  0
-#define SR55 14
-#define WR56  5
-#define SR56  6
-#define WR57 12
-#define SR57  9
-#define WR58  2
-#define SR58 12
-#define WR59 13
-#define SR59  9
-#define WR60  9
-#define SR60 12
-#define WR61  7
-#define SR61  5
-#define WR62 10
-#define SR62 15
-#define WR63 14
-#define SR63  8
-
-#define WR64 12
-#define SR64  8
-#define WR65 15
-#define SR65  5
-#define WR66 10
-#define SR66 12
-#define WR67  4
-#define SR67  9
-#define WR68  1
-#define SR68 12
-#define WR69  5
-#define SR69  5
-#define WR70  8
-#define SR70 14
-#define WR71  7
-#define SR71  6
-#define WR72  6
-#define SR72  8
-#define WR73  2
-#define SR73 13
-#define WR74 13
-#define SR74  6
-#define WR75 14
-#define SR75  5
-#define WR76  0
-#define SR76 15
-#define WR77  3
-#define SR77 13
-#define WR78  9
-#define SR78 11
-#define WR79 11
-#define SR79 11
-
diff --git a/crypto/openssl/crypto/ripemd/rmdtest.c b/crypto/openssl/crypto/ripemd/rmdtest.c
deleted file mode 100644
index cbfdf2ae6ff2..000000000000
--- a/crypto/openssl/crypto/ripemd/rmdtest.c
+++ /dev/null
@@ -1,145 +0,0 @@
-/* crypto/ripemd/rmdtest.c */
-/* Copyright (C) 1995-1998 Eric Young (eay@cryptsoft.com)
- * All rights reserved.
- *
- * This package is an SSL implementation written
- * by Eric Young (eay@cryptsoft.com).
- * The implementation was written so as to conform with Netscapes SSL.
- * 
- * This library is free for commercial and non-commercial use as long as
- * the following conditions are aheared to.  The following conditions
- * apply to all code found in this distribution, be it the RC4, RSA,
- * lhash, DES, etc., code; not just the SSL code.  The SSL documentation
- * included with this distribution is covered by the same copyright terms
- * except that the holder is Tim Hudson (tjh@cryptsoft.com).
- * 
- * Copyright remains Eric Young's, and as such any Copyright notices in
- * the code are not to be removed.
- * If this package is used in a product, Eric Young should be given attribution
- * as the author of the parts of the library used.
- * This can be in the form of a textual message at program startup or
- * in documentation (online or textual) provided with the package.
- * 
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions
- * are met:
- * 1. Redistributions of source code must retain the copyright
- *    notice, this list of conditions and the following disclaimer.
- * 2. Redistributions in binary form must reproduce the above copyright
- *    notice, this list of conditions and the following disclaimer in the
- *    documentation and/or other materials provided with the distribution.
- * 3. All advertising materials mentioning features or use of this software
- *    must display the following acknowledgement:
- *    "This product includes cryptographic software written by
- *     Eric Young (eay@cryptsoft.com)"
- *    The word 'cryptographic' can be left out if the rouines from the library
- *    being used are not cryptographic related :-).
- * 4. If you include any Windows specific code (or a derivative thereof) from 
- *    the apps directory (application code) you must include an acknowledgement:
- *    "This product includes software written by Tim Hudson (tjh@cryptsoft.com)"
- * 
- * THIS SOFTWARE IS PROVIDED BY ERIC YOUNG ``AS IS'' AND
- * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
- * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
- * ARE DISCLAIMED.  IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE
- * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
- * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
- * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
- * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
- * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
- * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
- * SUCH DAMAGE.
- * 
- * The licence and distribution terms for any publically available version or
- * derivative of this code cannot be changed.  i.e. this code cannot simply be
- * copied and put under another distribution licence
- * [including the GNU Public Licence.]
- */
-
-#include <stdio.h>
-#include <string.h>
-#include <stdlib.h>
-
-#include "../e_os.h"
-
-#ifdef OPENSSL_NO_RIPEMD
-int main(int argc, char *argv[])
-{
-    printf("No ripemd support\n");
-    return(0);
-}
-#else
-#include <openssl/ripemd.h>
-#include <openssl/evp.h>
-
-#ifdef CHARSET_EBCDIC
-#include <openssl/ebcdic.h>
-#endif
-
-static char *test[]={
-	"",
-	"a",
-	"abc",
-	"message digest",
-	"abcdefghijklmnopqrstuvwxyz",
-	"abcdbcdecdefdefgefghfghighijhijkijkljklmklmnlmnomnopnopq",
-	"ABCDEFGHIJKLMNOPQRSTUVWXYZabcdefghijklmnopqrstuvwxyz0123456789",
-	"12345678901234567890123456789012345678901234567890123456789012345678901234567890",
-	NULL,
-	};
-
-static char *ret[]={
-	"9c1185a5c5e9fc54612808977ee8f548b2258d31",
-	"0bdc9d2d256b3ee9daae347be6f4dc835a467ffe",
-	"8eb208f7e05d987a9b044a8e98c6b087f15a0bfc",
-	"5d0689ef49d2fae572b881b123a85ffa21595f36",
-	"f71c27109c692c1b56bbdceb5b9d2865b3708dbc",
-	"12a053384a9c0c88e405a06c27dcf49ada62eb2b",
-	"b0e20b6e3116640286ed3a87a5713079b21f5189",
-	"9b752e45573d4b39f4dbd3323cab82bf63326bfb",
-	};
-
-static char *pt(unsigned char *md);
-int main(int argc, char *argv[])
-	{
-	int i,err=0;
-	unsigned char **P,**R;
-	char *p;
-	unsigned char md[RIPEMD160_DIGEST_LENGTH];
-
-	P=(unsigned char **)test;
-	R=(unsigned char **)ret;
-	i=1;
-	while (*P != NULL)
-		{
-#ifdef CHARSET_EBCDIC
-		ebcdic2ascii((char *)*P, (char *)*P, strlen((char *)*P));
-#endif
-		EVP_Digest(&(P[0][0]),strlen((char *)*P),md,NULL,EVP_ripemd160(), NULL);
-		p=pt(md);
-		if (strcmp(p,(char *)*R) != 0)
-			{
-			printf("error calculating RIPEMD160 on '%s'\n",*P);
-			printf("got %s instead of %s\n",p,*R);
-			err++;
-			}
-		else
-			printf("test %d ok\n",i);
-		i++;
-		R++;
-		P++;
-		}
-	EXIT(err);
-	return(0);
-	}
-
-static char *pt(unsigned char *md)
-	{
-	int i;
-	static char buf[80];
-
-	for (i=0; i<RIPEMD160_DIGEST_LENGTH; i++)
-		sprintf(&(buf[i*2]),"%02x",md[i]);
-	return(buf);
-	}
-#endif
diff --git a/crypto/openssl/crypto/rsa/Makefile b/crypto/openssl/crypto/rsa/Makefile
deleted file mode 100644
index 13900812acde..000000000000
--- a/crypto/openssl/crypto/rsa/Makefile
+++ /dev/null
@@ -1,239 +0,0 @@
-#
-# OpenSSL/crypto/rsa/Makefile
-#
-
-DIR=	rsa
-TOP=	../..
-CC=	cc
-INCLUDES= -I.. -I$(TOP) -I../../include
-CFLAG=-g
-MAKEFILE=	Makefile
-AR=		ar r
-
-CFLAGS= $(INCLUDES) $(CFLAG)
-
-GENERAL=Makefile
-TEST=rsa_test.c
-APPS=
-
-LIB=$(TOP)/libcrypto.a
-LIBSRC= rsa_eay.c rsa_gen.c rsa_lib.c rsa_sign.c rsa_saos.c rsa_err.c \
-	rsa_pk1.c rsa_ssl.c rsa_none.c rsa_oaep.c rsa_chk.c rsa_null.c \
-	rsa_pss.c rsa_x931.c rsa_asn1.c rsa_depr.c
-LIBOBJ= rsa_eay.o rsa_gen.o rsa_lib.o rsa_sign.o rsa_saos.o rsa_err.o \
-	rsa_pk1.o rsa_ssl.o rsa_none.o rsa_oaep.o rsa_chk.o rsa_null.o \
-	rsa_pss.o rsa_x931.o rsa_asn1.o rsa_depr.o
-
-SRC= $(LIBSRC)
-
-EXHEADER= rsa.h
-HEADER=	$(EXHEADER)
-
-ALL=    $(GENERAL) $(SRC) $(HEADER)
-
-top:
-	(cd ../..; $(MAKE) DIRS=crypto SDIRS=$(DIR) sub_all)
-
-all:	lib
-
-lib:	$(LIBOBJ)
-	$(AR) $(LIB) $(LIBOBJ)
-	$(RANLIB) $(LIB) || echo Never mind.
-	@touch lib
-
-files:
-	$(PERL) $(TOP)/util/files.pl Makefile >> $(TOP)/MINFO
-
-links:
-	@$(PERL) $(TOP)/util/mklink.pl ../../include/openssl $(EXHEADER)
-	@$(PERL) $(TOP)/util/mklink.pl ../../test $(TEST)
-	@$(PERL) $(TOP)/util/mklink.pl ../../apps $(APPS)
-
-install:
-	@[ -n "$(INSTALLTOP)" ] # should be set by top Makefile...
-	@headerlist="$(EXHEADER)"; for i in $$headerlist ; \
-	do  \
-	(cp $$i $(INSTALL_PREFIX)$(INSTALLTOP)/include/openssl/$$i; \
-	chmod 644 $(INSTALL_PREFIX)$(INSTALLTOP)/include/openssl/$$i ); \
-	done;
-
-tags:
-	ctags $(SRC)
-
-tests:
-
-lint:
-	lint -DLINT $(INCLUDES) $(SRC)>fluff
-
-depend:
-	@[ -n "$(MAKEDEPEND)" ] # should be set by upper Makefile...
-	$(MAKEDEPEND) -- $(CFLAG) $(INCLUDES) $(DEPFLAG) -- $(PROGS) $(LIBSRC)
-
-dclean:
-	$(PERL) -pe 'if (/^# DO NOT DELETE THIS LINE/) {print; exit(0);}' $(MAKEFILE) >Makefile.new
-	mv -f Makefile.new $(MAKEFILE)
-
-clean:
-	rm -f *.o */*.o *.obj lib tags core .pure .nfs* *.old *.bak fluff
-
-# DO NOT DELETE THIS LINE -- make depend depends on it.
-
-rsa_asn1.o: ../../e_os.h ../../include/openssl/asn1.h
-rsa_asn1.o: ../../include/openssl/asn1t.h ../../include/openssl/bio.h
-rsa_asn1.o: ../../include/openssl/bn.h ../../include/openssl/buffer.h
-rsa_asn1.o: ../../include/openssl/crypto.h ../../include/openssl/e_os2.h
-rsa_asn1.o: ../../include/openssl/err.h ../../include/openssl/lhash.h
-rsa_asn1.o: ../../include/openssl/opensslconf.h
-rsa_asn1.o: ../../include/openssl/opensslv.h ../../include/openssl/ossl_typ.h
-rsa_asn1.o: ../../include/openssl/rsa.h ../../include/openssl/safestack.h
-rsa_asn1.o: ../../include/openssl/stack.h ../../include/openssl/symhacks.h
-rsa_asn1.o: ../cryptlib.h rsa_asn1.c
-rsa_chk.o: ../../include/openssl/asn1.h ../../include/openssl/bio.h
-rsa_chk.o: ../../include/openssl/bn.h ../../include/openssl/crypto.h
-rsa_chk.o: ../../include/openssl/e_os2.h ../../include/openssl/err.h
-rsa_chk.o: ../../include/openssl/lhash.h ../../include/openssl/opensslconf.h
-rsa_chk.o: ../../include/openssl/opensslv.h ../../include/openssl/ossl_typ.h
-rsa_chk.o: ../../include/openssl/rsa.h ../../include/openssl/safestack.h
-rsa_chk.o: ../../include/openssl/stack.h ../../include/openssl/symhacks.h
-rsa_chk.o: rsa_chk.c
-rsa_depr.o: ../../e_os.h ../../include/openssl/asn1.h
-rsa_depr.o: ../../include/openssl/bio.h ../../include/openssl/bn.h
-rsa_depr.o: ../../include/openssl/buffer.h ../../include/openssl/crypto.h
-rsa_depr.o: ../../include/openssl/e_os2.h ../../include/openssl/err.h
-rsa_depr.o: ../../include/openssl/lhash.h ../../include/openssl/opensslconf.h
-rsa_depr.o: ../../include/openssl/opensslv.h ../../include/openssl/ossl_typ.h
-rsa_depr.o: ../../include/openssl/rsa.h ../../include/openssl/safestack.h
-rsa_depr.o: ../../include/openssl/stack.h ../../include/openssl/symhacks.h
-rsa_depr.o: ../cryptlib.h rsa_depr.c
-rsa_eay.o: ../../e_os.h ../../include/openssl/asn1.h
-rsa_eay.o: ../../include/openssl/bio.h ../../include/openssl/bn.h
-rsa_eay.o: ../../include/openssl/buffer.h ../../include/openssl/crypto.h
-rsa_eay.o: ../../include/openssl/e_os2.h ../../include/openssl/err.h
-rsa_eay.o: ../../include/openssl/lhash.h ../../include/openssl/opensslconf.h
-rsa_eay.o: ../../include/openssl/opensslv.h ../../include/openssl/ossl_typ.h
-rsa_eay.o: ../../include/openssl/rand.h ../../include/openssl/rsa.h
-rsa_eay.o: ../../include/openssl/safestack.h ../../include/openssl/stack.h
-rsa_eay.o: ../../include/openssl/symhacks.h ../cryptlib.h rsa_eay.c
-rsa_err.o: ../../include/openssl/asn1.h ../../include/openssl/bio.h
-rsa_err.o: ../../include/openssl/crypto.h ../../include/openssl/e_os2.h
-rsa_err.o: ../../include/openssl/err.h ../../include/openssl/lhash.h
-rsa_err.o: ../../include/openssl/opensslconf.h ../../include/openssl/opensslv.h
-rsa_err.o: ../../include/openssl/ossl_typ.h ../../include/openssl/rsa.h
-rsa_err.o: ../../include/openssl/safestack.h ../../include/openssl/stack.h
-rsa_err.o: ../../include/openssl/symhacks.h rsa_err.c
-rsa_gen.o: ../../e_os.h ../../include/openssl/asn1.h
-rsa_gen.o: ../../include/openssl/bio.h ../../include/openssl/bn.h
-rsa_gen.o: ../../include/openssl/buffer.h ../../include/openssl/crypto.h
-rsa_gen.o: ../../include/openssl/e_os2.h ../../include/openssl/err.h
-rsa_gen.o: ../../include/openssl/lhash.h ../../include/openssl/opensslconf.h
-rsa_gen.o: ../../include/openssl/opensslv.h ../../include/openssl/ossl_typ.h
-rsa_gen.o: ../../include/openssl/rsa.h ../../include/openssl/safestack.h
-rsa_gen.o: ../../include/openssl/stack.h ../../include/openssl/symhacks.h
-rsa_gen.o: ../cryptlib.h rsa_gen.c
-rsa_lib.o: ../../e_os.h ../../include/openssl/asn1.h
-rsa_lib.o: ../../include/openssl/bio.h ../../include/openssl/bn.h
-rsa_lib.o: ../../include/openssl/buffer.h ../../include/openssl/crypto.h
-rsa_lib.o: ../../include/openssl/e_os2.h ../../include/openssl/engine.h
-rsa_lib.o: ../../include/openssl/err.h ../../include/openssl/lhash.h
-rsa_lib.o: ../../include/openssl/opensslconf.h ../../include/openssl/opensslv.h
-rsa_lib.o: ../../include/openssl/ossl_typ.h ../../include/openssl/rand.h
-rsa_lib.o: ../../include/openssl/rsa.h ../../include/openssl/safestack.h
-rsa_lib.o: ../../include/openssl/stack.h ../../include/openssl/symhacks.h
-rsa_lib.o: ../cryptlib.h rsa_lib.c
-rsa_none.o: ../../e_os.h ../../include/openssl/asn1.h
-rsa_none.o: ../../include/openssl/bio.h ../../include/openssl/bn.h
-rsa_none.o: ../../include/openssl/buffer.h ../../include/openssl/crypto.h
-rsa_none.o: ../../include/openssl/e_os2.h ../../include/openssl/err.h
-rsa_none.o: ../../include/openssl/lhash.h ../../include/openssl/opensslconf.h
-rsa_none.o: ../../include/openssl/opensslv.h ../../include/openssl/ossl_typ.h
-rsa_none.o: ../../include/openssl/rand.h ../../include/openssl/rsa.h
-rsa_none.o: ../../include/openssl/safestack.h ../../include/openssl/stack.h
-rsa_none.o: ../../include/openssl/symhacks.h ../cryptlib.h rsa_none.c
-rsa_null.o: ../../e_os.h ../../include/openssl/asn1.h
-rsa_null.o: ../../include/openssl/bio.h ../../include/openssl/bn.h
-rsa_null.o: ../../include/openssl/buffer.h ../../include/openssl/crypto.h
-rsa_null.o: ../../include/openssl/e_os2.h ../../include/openssl/err.h
-rsa_null.o: ../../include/openssl/lhash.h ../../include/openssl/opensslconf.h
-rsa_null.o: ../../include/openssl/opensslv.h ../../include/openssl/ossl_typ.h
-rsa_null.o: ../../include/openssl/rand.h ../../include/openssl/rsa.h
-rsa_null.o: ../../include/openssl/safestack.h ../../include/openssl/stack.h
-rsa_null.o: ../../include/openssl/symhacks.h ../cryptlib.h rsa_null.c
-rsa_oaep.o: ../../e_os.h ../../include/openssl/asn1.h
-rsa_oaep.o: ../../include/openssl/bio.h ../../include/openssl/bn.h
-rsa_oaep.o: ../../include/openssl/buffer.h ../../include/openssl/crypto.h
-rsa_oaep.o: ../../include/openssl/e_os2.h ../../include/openssl/err.h
-rsa_oaep.o: ../../include/openssl/evp.h ../../include/openssl/lhash.h
-rsa_oaep.o: ../../include/openssl/obj_mac.h ../../include/openssl/objects.h
-rsa_oaep.o: ../../include/openssl/opensslconf.h
-rsa_oaep.o: ../../include/openssl/opensslv.h ../../include/openssl/ossl_typ.h
-rsa_oaep.o: ../../include/openssl/rand.h ../../include/openssl/rsa.h
-rsa_oaep.o: ../../include/openssl/safestack.h ../../include/openssl/sha.h
-rsa_oaep.o: ../../include/openssl/stack.h ../../include/openssl/symhacks.h
-rsa_oaep.o: ../cryptlib.h rsa_oaep.c
-rsa_pk1.o: ../../e_os.h ../../include/openssl/asn1.h
-rsa_pk1.o: ../../include/openssl/bio.h ../../include/openssl/bn.h
-rsa_pk1.o: ../../include/openssl/buffer.h ../../include/openssl/crypto.h
-rsa_pk1.o: ../../include/openssl/e_os2.h ../../include/openssl/err.h
-rsa_pk1.o: ../../include/openssl/lhash.h ../../include/openssl/opensslconf.h
-rsa_pk1.o: ../../include/openssl/opensslv.h ../../include/openssl/ossl_typ.h
-rsa_pk1.o: ../../include/openssl/rand.h ../../include/openssl/rsa.h
-rsa_pk1.o: ../../include/openssl/safestack.h ../../include/openssl/stack.h
-rsa_pk1.o: ../../include/openssl/symhacks.h ../cryptlib.h rsa_pk1.c
-rsa_pss.o: ../../e_os.h ../../include/openssl/asn1.h
-rsa_pss.o: ../../include/openssl/bio.h ../../include/openssl/bn.h
-rsa_pss.o: ../../include/openssl/buffer.h ../../include/openssl/crypto.h
-rsa_pss.o: ../../include/openssl/e_os2.h ../../include/openssl/err.h
-rsa_pss.o: ../../include/openssl/evp.h ../../include/openssl/lhash.h
-rsa_pss.o: ../../include/openssl/obj_mac.h ../../include/openssl/objects.h
-rsa_pss.o: ../../include/openssl/opensslconf.h ../../include/openssl/opensslv.h
-rsa_pss.o: ../../include/openssl/ossl_typ.h ../../include/openssl/rand.h
-rsa_pss.o: ../../include/openssl/rsa.h ../../include/openssl/safestack.h
-rsa_pss.o: ../../include/openssl/sha.h ../../include/openssl/stack.h
-rsa_pss.o: ../../include/openssl/symhacks.h ../cryptlib.h rsa_pss.c
-rsa_saos.o: ../../e_os.h ../../include/openssl/asn1.h
-rsa_saos.o: ../../include/openssl/bio.h ../../include/openssl/bn.h
-rsa_saos.o: ../../include/openssl/buffer.h ../../include/openssl/crypto.h
-rsa_saos.o: ../../include/openssl/e_os2.h ../../include/openssl/ec.h
-rsa_saos.o: ../../include/openssl/ecdh.h ../../include/openssl/ecdsa.h
-rsa_saos.o: ../../include/openssl/err.h ../../include/openssl/evp.h
-rsa_saos.o: ../../include/openssl/lhash.h ../../include/openssl/obj_mac.h
-rsa_saos.o: ../../include/openssl/objects.h ../../include/openssl/opensslconf.h
-rsa_saos.o: ../../include/openssl/opensslv.h ../../include/openssl/ossl_typ.h
-rsa_saos.o: ../../include/openssl/pkcs7.h ../../include/openssl/rsa.h
-rsa_saos.o: ../../include/openssl/safestack.h ../../include/openssl/sha.h
-rsa_saos.o: ../../include/openssl/stack.h ../../include/openssl/symhacks.h
-rsa_saos.o: ../../include/openssl/x509.h ../../include/openssl/x509_vfy.h
-rsa_saos.o: ../cryptlib.h rsa_saos.c
-rsa_sign.o: ../../e_os.h ../../include/openssl/asn1.h
-rsa_sign.o: ../../include/openssl/bio.h ../../include/openssl/bn.h
-rsa_sign.o: ../../include/openssl/buffer.h ../../include/openssl/crypto.h
-rsa_sign.o: ../../include/openssl/e_os2.h ../../include/openssl/ec.h
-rsa_sign.o: ../../include/openssl/ecdh.h ../../include/openssl/ecdsa.h
-rsa_sign.o: ../../include/openssl/err.h ../../include/openssl/evp.h
-rsa_sign.o: ../../include/openssl/lhash.h ../../include/openssl/obj_mac.h
-rsa_sign.o: ../../include/openssl/objects.h ../../include/openssl/opensslconf.h
-rsa_sign.o: ../../include/openssl/opensslv.h ../../include/openssl/ossl_typ.h
-rsa_sign.o: ../../include/openssl/pkcs7.h ../../include/openssl/rsa.h
-rsa_sign.o: ../../include/openssl/safestack.h ../../include/openssl/sha.h
-rsa_sign.o: ../../include/openssl/stack.h ../../include/openssl/symhacks.h
-rsa_sign.o: ../../include/openssl/x509.h ../../include/openssl/x509_vfy.h
-rsa_sign.o: ../cryptlib.h rsa_sign.c
-rsa_ssl.o: ../../e_os.h ../../include/openssl/asn1.h
-rsa_ssl.o: ../../include/openssl/bio.h ../../include/openssl/bn.h
-rsa_ssl.o: ../../include/openssl/buffer.h ../../include/openssl/crypto.h
-rsa_ssl.o: ../../include/openssl/e_os2.h ../../include/openssl/err.h
-rsa_ssl.o: ../../include/openssl/lhash.h ../../include/openssl/opensslconf.h
-rsa_ssl.o: ../../include/openssl/opensslv.h ../../include/openssl/ossl_typ.h
-rsa_ssl.o: ../../include/openssl/rand.h ../../include/openssl/rsa.h
-rsa_ssl.o: ../../include/openssl/safestack.h ../../include/openssl/stack.h
-rsa_ssl.o: ../../include/openssl/symhacks.h ../cryptlib.h rsa_ssl.c
-rsa_x931.o: ../../e_os.h ../../include/openssl/asn1.h
-rsa_x931.o: ../../include/openssl/bio.h ../../include/openssl/bn.h
-rsa_x931.o: ../../include/openssl/buffer.h ../../include/openssl/crypto.h
-rsa_x931.o: ../../include/openssl/e_os2.h ../../include/openssl/err.h
-rsa_x931.o: ../../include/openssl/lhash.h ../../include/openssl/obj_mac.h
-rsa_x931.o: ../../include/openssl/objects.h ../../include/openssl/opensslconf.h
-rsa_x931.o: ../../include/openssl/opensslv.h ../../include/openssl/ossl_typ.h
-rsa_x931.o: ../../include/openssl/rand.h ../../include/openssl/rsa.h
-rsa_x931.o: ../../include/openssl/safestack.h ../../include/openssl/stack.h
-rsa_x931.o: ../../include/openssl/symhacks.h ../cryptlib.h rsa_x931.c
diff --git a/crypto/openssl/crypto/rsa/rsa.h b/crypto/openssl/crypto/rsa/rsa.h
deleted file mode 100644
index b19c556930f4..000000000000
--- a/crypto/openssl/crypto/rsa/rsa.h
+++ /dev/null
@@ -1,441 +0,0 @@
-/* crypto/rsa/rsa.h */
-/* Copyright (C) 1995-1998 Eric Young (eay@cryptsoft.com)
- * All rights reserved.
- *
- * This package is an SSL implementation written
- * by Eric Young (eay@cryptsoft.com).
- * The implementation was written so as to conform with Netscapes SSL.
- * 
- * This library is free for commercial and non-commercial use as long as
- * the following conditions are aheared to.  The following conditions
- * apply to all code found in this distribution, be it the RC4, RSA,
- * lhash, DES, etc., code; not just the SSL code.  The SSL documentation
- * included with this distribution is covered by the same copyright terms
- * except that the holder is Tim Hudson (tjh@cryptsoft.com).
- * 
- * Copyright remains Eric Young's, and as such any Copyright notices in
- * the code are not to be removed.
- * If this package is used in a product, Eric Young should be given attribution
- * as the author of the parts of the library used.
- * This can be in the form of a textual message at program startup or
- * in documentation (online or textual) provided with the package.
- * 
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions
- * are met:
- * 1. Redistributions of source code must retain the copyright
- *    notice, this list of conditions and the following disclaimer.
- * 2. Redistributions in binary form must reproduce the above copyright
- *    notice, this list of conditions and the following disclaimer in the
- *    documentation and/or other materials provided with the distribution.
- * 3. All advertising materials mentioning features or use of this software
- *    must display the following acknowledgement:
- *    "This product includes cryptographic software written by
- *     Eric Young (eay@cryptsoft.com)"
- *    The word 'cryptographic' can be left out if the rouines from the library
- *    being used are not cryptographic related :-).
- * 4. If you include any Windows specific code (or a derivative thereof) from 
- *    the apps directory (application code) you must include an acknowledgement:
- *    "This product includes software written by Tim Hudson (tjh@cryptsoft.com)"
- * 
- * THIS SOFTWARE IS PROVIDED BY ERIC YOUNG ``AS IS'' AND
- * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
- * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
- * ARE DISCLAIMED.  IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE
- * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
- * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
- * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
- * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
- * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
- * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
- * SUCH DAMAGE.
- * 
- * The licence and distribution terms for any publically available version or
- * derivative of this code cannot be changed.  i.e. this code cannot simply be
- * copied and put under another distribution licence
- * [including the GNU Public Licence.]
- */
-
-#ifndef HEADER_RSA_H
-#define HEADER_RSA_H
-
-#include <openssl/asn1.h>
-
-#ifndef OPENSSL_NO_BIO
-#include <openssl/bio.h>
-#endif
-#include <openssl/crypto.h>
-#include <openssl/ossl_typ.h>
-#ifndef OPENSSL_NO_DEPRECATED
-#include <openssl/bn.h>
-#endif
-
-#ifdef OPENSSL_NO_RSA
-#error RSA is disabled.
-#endif
-
-#ifdef  __cplusplus
-extern "C" {
-#endif
-
-/* Declared already in ossl_typ.h */
-/* typedef struct rsa_st RSA; */
-/* typedef struct rsa_meth_st RSA_METHOD; */
-
-struct rsa_meth_st
-	{
-	const char *name;
-	int (*rsa_pub_enc)(int flen,const unsigned char *from,
-			   unsigned char *to,
-			   RSA *rsa,int padding);
-	int (*rsa_pub_dec)(int flen,const unsigned char *from,
-			   unsigned char *to,
-			   RSA *rsa,int padding);
-	int (*rsa_priv_enc)(int flen,const unsigned char *from,
-			    unsigned char *to,
-			    RSA *rsa,int padding);
-	int (*rsa_priv_dec)(int flen,const unsigned char *from,
-			    unsigned char *to,
-			    RSA *rsa,int padding);
-	int (*rsa_mod_exp)(BIGNUM *r0,const BIGNUM *I,RSA *rsa,BN_CTX *ctx); /* Can be null */
-	int (*bn_mod_exp)(BIGNUM *r, const BIGNUM *a, const BIGNUM *p,
-			  const BIGNUM *m, BN_CTX *ctx,
-			  BN_MONT_CTX *m_ctx); /* Can be null */
-	int (*init)(RSA *rsa);		/* called at new */
-	int (*finish)(RSA *rsa);	/* called at free */
-	int flags;			/* RSA_METHOD_FLAG_* things */
-	char *app_data;			/* may be needed! */
-/* New sign and verify functions: some libraries don't allow arbitrary data
- * to be signed/verified: this allows them to be used. Note: for this to work
- * the RSA_public_decrypt() and RSA_private_encrypt() should *NOT* be used
- * RSA_sign(), RSA_verify() should be used instead. Note: for backwards
- * compatibility this functionality is only enabled if the RSA_FLAG_SIGN_VER
- * option is set in 'flags'.
- */
-	int (*rsa_sign)(int type,
-		const unsigned char *m, unsigned int m_length,
-		unsigned char *sigret, unsigned int *siglen, const RSA *rsa);
-	int (*rsa_verify)(int dtype,
-		const unsigned char *m, unsigned int m_length,
-		unsigned char *sigbuf, unsigned int siglen, const RSA *rsa);
-/* If this callback is NULL, the builtin software RSA key-gen will be used. This
- * is for behavioural compatibility whilst the code gets rewired, but one day
- * it would be nice to assume there are no such things as "builtin software"
- * implementations. */
-	int (*rsa_keygen)(RSA *rsa, int bits, BIGNUM *e, BN_GENCB *cb);
-	};
-
-struct rsa_st
-	{
-	/* The first parameter is used to pickup errors where
-	 * this is passed instead of aEVP_PKEY, it is set to 0 */
-	int pad;
-	long version;
-	const RSA_METHOD *meth;
-	/* functional reference if 'meth' is ENGINE-provided */
-	ENGINE *engine;
-	BIGNUM *n;
-	BIGNUM *e;
-	BIGNUM *d;
-	BIGNUM *p;
-	BIGNUM *q;
-	BIGNUM *dmp1;
-	BIGNUM *dmq1;
-	BIGNUM *iqmp;
-	/* be careful using this if the RSA structure is shared */
-	CRYPTO_EX_DATA ex_data;
-	int references;
-	int flags;
-
-	/* Used to cache montgomery values */
-	BN_MONT_CTX *_method_mod_n;
-	BN_MONT_CTX *_method_mod_p;
-	BN_MONT_CTX *_method_mod_q;
-
-	/* all BIGNUM values are actually in the following data, if it is not
-	 * NULL */
-	char *bignum_data;
-	BN_BLINDING *blinding;
-	BN_BLINDING *mt_blinding;
-	};
-
-#ifndef OPENSSL_RSA_MAX_MODULUS_BITS
-# define OPENSSL_RSA_MAX_MODULUS_BITS	16384
-#endif
-
-#ifndef OPENSSL_RSA_SMALL_MODULUS_BITS
-# define OPENSSL_RSA_SMALL_MODULUS_BITS	3072
-#endif
-#ifndef OPENSSL_RSA_MAX_PUBEXP_BITS
-# define OPENSSL_RSA_MAX_PUBEXP_BITS	64 /* exponent limit enforced for "large" modulus only */
-#endif
-
-#define RSA_3	0x3L
-#define RSA_F4	0x10001L
-
-#define RSA_METHOD_FLAG_NO_CHECK	0x0001 /* don't check pub/private match */
-
-#define RSA_FLAG_CACHE_PUBLIC		0x0002
-#define RSA_FLAG_CACHE_PRIVATE		0x0004
-#define RSA_FLAG_BLINDING		0x0008
-#define RSA_FLAG_THREAD_SAFE		0x0010
-/* This flag means the private key operations will be handled by rsa_mod_exp
- * and that they do not depend on the private key components being present:
- * for example a key stored in external hardware. Without this flag bn_mod_exp
- * gets called when private key components are absent.
- */
-#define RSA_FLAG_EXT_PKEY		0x0020
-
-/* This flag in the RSA_METHOD enables the new rsa_sign, rsa_verify functions.
- */
-#define RSA_FLAG_SIGN_VER		0x0040
-
-#define RSA_FLAG_NO_BLINDING		0x0080 /* new with 0.9.6j and 0.9.7b; the built-in
-                                                * RSA implementation now uses blinding by
-                                                * default (ignoring RSA_FLAG_BLINDING),
-                                                * but other engines might not need it
-                                                */
-#define RSA_FLAG_NO_EXP_CONSTTIME	0x0100 /* new with 0.9.7h; the built-in RSA
-                                                * implementation now uses constant time
-                                                * modular exponentiation for secret exponents
-                                                * by default. This flag causes the
-                                                * faster variable sliding window method to
-                                                * be used for all exponents.
-                                                */
-
-#define RSA_PKCS1_PADDING	1
-#define RSA_SSLV23_PADDING	2
-#define RSA_NO_PADDING		3
-#define RSA_PKCS1_OAEP_PADDING	4
-#define RSA_X931_PADDING	5
-
-#define RSA_PKCS1_PADDING_SIZE	11
-
-#define RSA_set_app_data(s,arg)         RSA_set_ex_data(s,0,arg)
-#define RSA_get_app_data(s)             RSA_get_ex_data(s,0)
-
-RSA *	RSA_new(void);
-RSA *	RSA_new_method(ENGINE *engine);
-int	RSA_size(const RSA *);
-
-/* Deprecated version */
-#ifndef OPENSSL_NO_DEPRECATED
-RSA *	RSA_generate_key(int bits, unsigned long e,void
-		(*callback)(int,int,void *),void *cb_arg);
-#endif /* !defined(OPENSSL_NO_DEPRECATED) */
-
-/* New version */
-int	RSA_generate_key_ex(RSA *rsa, int bits, BIGNUM *e, BN_GENCB *cb);
-
-int	RSA_check_key(const RSA *);
-	/* next 4 return -1 on error */
-int	RSA_public_encrypt(int flen, const unsigned char *from,
-		unsigned char *to, RSA *rsa,int padding);
-int	RSA_private_encrypt(int flen, const unsigned char *from,
-		unsigned char *to, RSA *rsa,int padding);
-int	RSA_public_decrypt(int flen, const unsigned char *from, 
-		unsigned char *to, RSA *rsa,int padding);
-int	RSA_private_decrypt(int flen, const unsigned char *from, 
-		unsigned char *to, RSA *rsa,int padding);
-void	RSA_free (RSA *r);
-/* "up" the RSA object's reference count */
-int	RSA_up_ref(RSA *r);
-
-int	RSA_flags(const RSA *r);
-
-void RSA_set_default_method(const RSA_METHOD *meth);
-const RSA_METHOD *RSA_get_default_method(void);
-const RSA_METHOD *RSA_get_method(const RSA *rsa);
-int RSA_set_method(RSA *rsa, const RSA_METHOD *meth);
-
-/* This function needs the memory locking malloc callbacks to be installed */
-int RSA_memory_lock(RSA *r);
-
-/* these are the actual SSLeay RSA functions */
-const RSA_METHOD *RSA_PKCS1_SSLeay(void);
-
-const RSA_METHOD *RSA_null_method(void);
-
-DECLARE_ASN1_ENCODE_FUNCTIONS_const(RSA, RSAPublicKey)
-DECLARE_ASN1_ENCODE_FUNCTIONS_const(RSA, RSAPrivateKey)
-
-#ifndef OPENSSL_NO_FP_API
-int	RSA_print_fp(FILE *fp, const RSA *r,int offset);
-#endif
-
-#ifndef OPENSSL_NO_BIO
-int	RSA_print(BIO *bp, const RSA *r,int offset);
-#endif
-
-int i2d_RSA_NET(const RSA *a, unsigned char **pp,
-		int (*cb)(char *buf, int len, const char *prompt, int verify),
-		int sgckey);
-RSA *d2i_RSA_NET(RSA **a, const unsigned char **pp, long length,
-		 int (*cb)(char *buf, int len, const char *prompt, int verify),
-		 int sgckey);
-
-int i2d_Netscape_RSA(const RSA *a, unsigned char **pp,
-		     int (*cb)(char *buf, int len, const char *prompt,
-			       int verify));
-RSA *d2i_Netscape_RSA(RSA **a, const unsigned char **pp, long length,
-		      int (*cb)(char *buf, int len, const char *prompt,
-				int verify));
-
-/* The following 2 functions sign and verify a X509_SIG ASN1 object
- * inside PKCS#1 padded RSA encryption */
-int RSA_sign(int type, const unsigned char *m, unsigned int m_length,
-	unsigned char *sigret, unsigned int *siglen, RSA *rsa);
-int RSA_verify(int type, const unsigned char *m, unsigned int m_length,
-	unsigned char *sigbuf, unsigned int siglen, RSA *rsa);
-
-/* The following 2 function sign and verify a ASN1_OCTET_STRING
- * object inside PKCS#1 padded RSA encryption */
-int RSA_sign_ASN1_OCTET_STRING(int type,
-	const unsigned char *m, unsigned int m_length,
-	unsigned char *sigret, unsigned int *siglen, RSA *rsa);
-int RSA_verify_ASN1_OCTET_STRING(int type,
-	const unsigned char *m, unsigned int m_length,
-	unsigned char *sigbuf, unsigned int siglen, RSA *rsa);
-
-int RSA_blinding_on(RSA *rsa, BN_CTX *ctx);
-void RSA_blinding_off(RSA *rsa);
-BN_BLINDING *RSA_setup_blinding(RSA *rsa, BN_CTX *ctx);
-
-int RSA_padding_add_PKCS1_type_1(unsigned char *to,int tlen,
-	const unsigned char *f,int fl);
-int RSA_padding_check_PKCS1_type_1(unsigned char *to,int tlen,
-	const unsigned char *f,int fl,int rsa_len);
-int RSA_padding_add_PKCS1_type_2(unsigned char *to,int tlen,
-	const unsigned char *f,int fl);
-int RSA_padding_check_PKCS1_type_2(unsigned char *to,int tlen,
-	const unsigned char *f,int fl,int rsa_len);
-int PKCS1_MGF1(unsigned char *mask, long len,
-	const unsigned char *seed, long seedlen, const EVP_MD *dgst);
-int RSA_padding_add_PKCS1_OAEP(unsigned char *to,int tlen,
-	const unsigned char *f,int fl,
-	const unsigned char *p,int pl);
-int RSA_padding_check_PKCS1_OAEP(unsigned char *to,int tlen,
-	const unsigned char *f,int fl,int rsa_len,
-	const unsigned char *p,int pl);
-int RSA_padding_add_SSLv23(unsigned char *to,int tlen,
-	const unsigned char *f,int fl);
-int RSA_padding_check_SSLv23(unsigned char *to,int tlen,
-	const unsigned char *f,int fl,int rsa_len);
-int RSA_padding_add_none(unsigned char *to,int tlen,
-	const unsigned char *f,int fl);
-int RSA_padding_check_none(unsigned char *to,int tlen,
-	const unsigned char *f,int fl,int rsa_len);
-int RSA_padding_add_X931(unsigned char *to,int tlen,
-	const unsigned char *f,int fl);
-int RSA_padding_check_X931(unsigned char *to,int tlen,
-	const unsigned char *f,int fl,int rsa_len);
-int RSA_X931_hash_id(int nid);
-
-int RSA_verify_PKCS1_PSS(RSA *rsa, const unsigned char *mHash,
-			const EVP_MD *Hash, const unsigned char *EM, int sLen);
-int RSA_padding_add_PKCS1_PSS(RSA *rsa, unsigned char *EM,
-			const unsigned char *mHash,
-			const EVP_MD *Hash, int sLen);
-
-int RSA_get_ex_new_index(long argl, void *argp, CRYPTO_EX_new *new_func,
-	CRYPTO_EX_dup *dup_func, CRYPTO_EX_free *free_func);
-int RSA_set_ex_data(RSA *r,int idx,void *arg);
-void *RSA_get_ex_data(const RSA *r, int idx);
-
-RSA *RSAPublicKey_dup(RSA *rsa);
-RSA *RSAPrivateKey_dup(RSA *rsa);
-
-/* BEGIN ERROR CODES */
-/* The following lines are auto generated by the script mkerr.pl. Any changes
- * made after this point may be overwritten when the script is next run.
- */
-void ERR_load_RSA_strings(void);
-
-/* Error codes for the RSA functions. */
-
-/* Function codes. */
-#define RSA_F_MEMORY_LOCK				 100
-#define RSA_F_RSA_BUILTIN_KEYGEN			 129
-#define RSA_F_RSA_CHECK_KEY				 123
-#define RSA_F_RSA_EAY_PRIVATE_DECRYPT			 101
-#define RSA_F_RSA_EAY_PRIVATE_ENCRYPT			 102
-#define RSA_F_RSA_EAY_PUBLIC_DECRYPT			 103
-#define RSA_F_RSA_EAY_PUBLIC_ENCRYPT			 104
-#define RSA_F_RSA_GENERATE_KEY				 105
-#define RSA_F_RSA_MEMORY_LOCK				 130
-#define RSA_F_RSA_NEW_METHOD				 106
-#define RSA_F_RSA_NULL					 124
-#define RSA_F_RSA_NULL_MOD_EXP				 131
-#define RSA_F_RSA_NULL_PRIVATE_DECRYPT			 132
-#define RSA_F_RSA_NULL_PRIVATE_ENCRYPT			 133
-#define RSA_F_RSA_NULL_PUBLIC_DECRYPT			 134
-#define RSA_F_RSA_NULL_PUBLIC_ENCRYPT			 135
-#define RSA_F_RSA_PADDING_ADD_NONE			 107
-#define RSA_F_RSA_PADDING_ADD_PKCS1_OAEP		 121
-#define RSA_F_RSA_PADDING_ADD_PKCS1_PSS			 125
-#define RSA_F_RSA_PADDING_ADD_PKCS1_TYPE_1		 108
-#define RSA_F_RSA_PADDING_ADD_PKCS1_TYPE_2		 109
-#define RSA_F_RSA_PADDING_ADD_SSLV23			 110
-#define RSA_F_RSA_PADDING_ADD_X931			 127
-#define RSA_F_RSA_PADDING_CHECK_NONE			 111
-#define RSA_F_RSA_PADDING_CHECK_PKCS1_OAEP		 122
-#define RSA_F_RSA_PADDING_CHECK_PKCS1_TYPE_1		 112
-#define RSA_F_RSA_PADDING_CHECK_PKCS1_TYPE_2		 113
-#define RSA_F_RSA_PADDING_CHECK_SSLV23			 114
-#define RSA_F_RSA_PADDING_CHECK_X931			 128
-#define RSA_F_RSA_PRINT					 115
-#define RSA_F_RSA_PRINT_FP				 116
-#define RSA_F_RSA_SETUP_BLINDING			 136
-#define RSA_F_RSA_SIGN					 117
-#define RSA_F_RSA_SIGN_ASN1_OCTET_STRING		 118
-#define RSA_F_RSA_VERIFY				 119
-#define RSA_F_RSA_VERIFY_ASN1_OCTET_STRING		 120
-#define RSA_F_RSA_VERIFY_PKCS1_PSS			 126
-
-/* Reason codes. */
-#define RSA_R_ALGORITHM_MISMATCH			 100
-#define RSA_R_BAD_E_VALUE				 101
-#define RSA_R_BAD_FIXED_HEADER_DECRYPT			 102
-#define RSA_R_BAD_PAD_BYTE_COUNT			 103
-#define RSA_R_BAD_SIGNATURE				 104
-#define RSA_R_BLOCK_TYPE_IS_NOT_01			 106
-#define RSA_R_BLOCK_TYPE_IS_NOT_02			 107
-#define RSA_R_DATA_GREATER_THAN_MOD_LEN			 108
-#define RSA_R_DATA_TOO_LARGE				 109
-#define RSA_R_DATA_TOO_LARGE_FOR_KEY_SIZE		 110
-#define RSA_R_DATA_TOO_LARGE_FOR_MODULUS		 132
-#define RSA_R_DATA_TOO_SMALL				 111
-#define RSA_R_DATA_TOO_SMALL_FOR_KEY_SIZE		 122
-#define RSA_R_DIGEST_TOO_BIG_FOR_RSA_KEY		 112
-#define RSA_R_DMP1_NOT_CONGRUENT_TO_D			 124
-#define RSA_R_DMQ1_NOT_CONGRUENT_TO_D			 125
-#define RSA_R_D_E_NOT_CONGRUENT_TO_1			 123
-#define RSA_R_FIRST_OCTET_INVALID			 133
-#define RSA_R_INVALID_HEADER				 137
-#define RSA_R_INVALID_MESSAGE_LENGTH			 131
-#define RSA_R_INVALID_PADDING				 138
-#define RSA_R_INVALID_TRAILER				 139
-#define RSA_R_IQMP_NOT_INVERSE_OF_Q			 126
-#define RSA_R_KEY_SIZE_TOO_SMALL			 120
-#define RSA_R_LAST_OCTET_INVALID			 134
-#define RSA_R_MODULUS_TOO_LARGE				 105
-#define RSA_R_NO_PUBLIC_EXPONENT			 140
-#define RSA_R_NULL_BEFORE_BLOCK_MISSING			 113
-#define RSA_R_N_DOES_NOT_EQUAL_P_Q			 127
-#define RSA_R_OAEP_DECODING_ERROR			 121
-#define RSA_R_PADDING_CHECK_FAILED			 114
-#define RSA_R_P_NOT_PRIME				 128
-#define RSA_R_Q_NOT_PRIME				 129
-#define RSA_R_RSA_OPERATIONS_NOT_SUPPORTED		 130
-#define RSA_R_SLEN_CHECK_FAILED				 136
-#define RSA_R_SLEN_RECOVERY_FAILED			 135
-#define RSA_R_SSLV3_ROLLBACK_ATTACK			 115
-#define RSA_R_THE_ASN1_OBJECT_IDENTIFIER_IS_NOT_KNOWN_FOR_THIS_MD 116
-#define RSA_R_UNKNOWN_ALGORITHM_TYPE			 117
-#define RSA_R_UNKNOWN_PADDING_TYPE			 118
-#define RSA_R_WRONG_SIGNATURE_LENGTH			 119
-
-#ifdef  __cplusplus
-}
-#endif
-#endif
diff --git a/crypto/openssl/crypto/rsa/rsa_asn1.c b/crypto/openssl/crypto/rsa/rsa_asn1.c
deleted file mode 100644
index bbbf26d50ed6..000000000000
--- a/crypto/openssl/crypto/rsa/rsa_asn1.c
+++ /dev/null
@@ -1,121 +0,0 @@
-/* rsa_asn1.c */
-/* Written by Dr Stephen N Henson (shenson@bigfoot.com) for the OpenSSL
- * project 2000.
- */
-/* ====================================================================
- * Copyright (c) 2000 The OpenSSL Project.  All rights reserved.
- *
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions
- * are met:
- *
- * 1. Redistributions of source code must retain the above copyright
- *    notice, this list of conditions and the following disclaimer. 
- *
- * 2. Redistributions in binary form must reproduce the above copyright
- *    notice, this list of conditions and the following disclaimer in
- *    the documentation and/or other materials provided with the
- *    distribution.
- *
- * 3. All advertising materials mentioning features or use of this
- *    software must display the following acknowledgment:
- *    "This product includes software developed by the OpenSSL Project
- *    for use in the OpenSSL Toolkit. (http://www.OpenSSL.org/)"
- *
- * 4. The names "OpenSSL Toolkit" and "OpenSSL Project" must not be used to
- *    endorse or promote products derived from this software without
- *    prior written permission. For written permission, please contact
- *    licensing@OpenSSL.org.
- *
- * 5. Products derived from this software may not be called "OpenSSL"
- *    nor may "OpenSSL" appear in their names without prior written
- *    permission of the OpenSSL Project.
- *
- * 6. Redistributions of any form whatsoever must retain the following
- *    acknowledgment:
- *    "This product includes software developed by the OpenSSL Project
- *    for use in the OpenSSL Toolkit (http://www.OpenSSL.org/)"
- *
- * THIS SOFTWARE IS PROVIDED BY THE OpenSSL PROJECT ``AS IS'' AND ANY
- * EXPRESSED OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
- * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR
- * PURPOSE ARE DISCLAIMED.  IN NO EVENT SHALL THE OpenSSL PROJECT OR
- * ITS CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
- * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
- * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
- * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
- * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
- * STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
- * ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED
- * OF THE POSSIBILITY OF SUCH DAMAGE.
- * ====================================================================
- *
- * This product includes cryptographic software written by Eric Young
- * (eay@cryptsoft.com).  This product includes software written by Tim
- * Hudson (tjh@cryptsoft.com).
- *
- */
-
-#include <stdio.h>
-#include "cryptlib.h"
-#include <openssl/bn.h>
-#include <openssl/rsa.h>
-#include <openssl/asn1t.h>
-
-static ASN1_METHOD method={
-        (I2D_OF(void))     i2d_RSAPrivateKey,
-        (D2I_OF(void))     d2i_RSAPrivateKey,
-        (void *(*)(void))  RSA_new,
-        (void (*)(void *)) RSA_free};
-
-ASN1_METHOD *RSAPrivateKey_asn1_meth(void)
-	{
-	return(&method);
-	}
-
-/* Override the default free and new methods */
-static int rsa_cb(int operation, ASN1_VALUE **pval, const ASN1_ITEM *it)
-{
-	if(operation == ASN1_OP_NEW_PRE) {
-		*pval = (ASN1_VALUE *)RSA_new();
-		if(*pval) return 2;
-		return 0;
-	} else if(operation == ASN1_OP_FREE_PRE) {
-		RSA_free((RSA *)*pval);
-		*pval = NULL;
-		return 2;
-	}
-	return 1;
-}
-
-ASN1_SEQUENCE_cb(RSAPrivateKey, rsa_cb) = {
-	ASN1_SIMPLE(RSA, version, LONG),
-	ASN1_SIMPLE(RSA, n, BIGNUM),
-	ASN1_SIMPLE(RSA, e, BIGNUM),
-	ASN1_SIMPLE(RSA, d, BIGNUM),
-	ASN1_SIMPLE(RSA, p, BIGNUM),
-	ASN1_SIMPLE(RSA, q, BIGNUM),
-	ASN1_SIMPLE(RSA, dmp1, BIGNUM),
-	ASN1_SIMPLE(RSA, dmq1, BIGNUM),
-	ASN1_SIMPLE(RSA, iqmp, BIGNUM)
-} ASN1_SEQUENCE_END_cb(RSA, RSAPrivateKey)
-
-
-ASN1_SEQUENCE_cb(RSAPublicKey, rsa_cb) = {
-	ASN1_SIMPLE(RSA, n, BIGNUM),
-	ASN1_SIMPLE(RSA, e, BIGNUM),
-} ASN1_SEQUENCE_END_cb(RSA, RSAPublicKey)
-
-IMPLEMENT_ASN1_ENCODE_FUNCTIONS_const_fname(RSA, RSAPrivateKey, RSAPrivateKey)
-
-IMPLEMENT_ASN1_ENCODE_FUNCTIONS_const_fname(RSA, RSAPublicKey, RSAPublicKey)
-
-RSA *RSAPublicKey_dup(RSA *rsa)
-	{
-	return ASN1_item_dup(ASN1_ITEM_rptr(RSAPublicKey), rsa);
-	}
-
-RSA *RSAPrivateKey_dup(RSA *rsa)
-	{
-	return ASN1_item_dup(ASN1_ITEM_rptr(RSAPrivateKey), rsa);
-	}
diff --git a/crypto/openssl/crypto/rsa/rsa_chk.c b/crypto/openssl/crypto/rsa/rsa_chk.c
deleted file mode 100644
index 9d848db8c6c7..000000000000
--- a/crypto/openssl/crypto/rsa/rsa_chk.c
+++ /dev/null
@@ -1,184 +0,0 @@
-/* crypto/rsa/rsa_chk.c  -*- Mode: C; c-file-style: "eay" -*- */
-/* ====================================================================
- * Copyright (c) 1999 The OpenSSL Project.  All rights reserved.
- *
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions
- * are met:
- *
- * 1. Redistributions of source code must retain the above copyright
- *    notice, this list of conditions and the following disclaimer. 
- *
- * 2. Redistributions in binary form must reproduce the above copyright
- *    notice, this list of conditions and the following disclaimer in
- *    the documentation and/or other materials provided with the
- *    distribution.
- *
- * 3. All advertising materials mentioning features or use of this
- *    software must display the following acknowledgment:
- *    "This product includes software developed by the OpenSSL Project
- *    for use in the OpenSSL Toolkit. (http://www.OpenSSL.org/)"
- *
- * 4. The names "OpenSSL Toolkit" and "OpenSSL Project" must not be used to
- *    endorse or promote products derived from this software without
- *    prior written permission. For written permission, please contact
- *    openssl-core@OpenSSL.org.
- *
- * 5. Products derived from this software may not be called "OpenSSL"
- *    nor may "OpenSSL" appear in their names without prior written
- *    permission of the OpenSSL Project.
- *
- * 6. Redistributions of any form whatsoever must retain the following
- *    acknowledgment:
- *    "This product includes software developed by the OpenSSL Project
- *    for use in the OpenSSL Toolkit (http://www.OpenSSL.org/)"
- *
- * THIS SOFTWARE IS PROVIDED BY THE OpenSSL PROJECT ``AS IS'' AND ANY
- * EXPRESSED OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
- * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR
- * PURPOSE ARE DISCLAIMED.  IN NO EVENT SHALL THE OpenSSL PROJECT OR
- * ITS CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
- * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
- * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
- * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
- * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
- * STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
- * ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED
- * OF THE POSSIBILITY OF SUCH DAMAGE.
- * ====================================================================
- */
-
-#include <openssl/bn.h>
-#include <openssl/err.h>
-#include <openssl/rsa.h>
-
-
-int RSA_check_key(const RSA *key)
-	{
-	BIGNUM *i, *j, *k, *l, *m;
-	BN_CTX *ctx;
-	int r;
-	int ret=1;
-	
-	i = BN_new();
-	j = BN_new();
-	k = BN_new();
-	l = BN_new();
-	m = BN_new();
-	ctx = BN_CTX_new();
-	if (i == NULL || j == NULL || k == NULL || l == NULL ||
-		m == NULL || ctx == NULL)
-		{
-		ret = -1;
-		RSAerr(RSA_F_RSA_CHECK_KEY, ERR_R_MALLOC_FAILURE);
-		goto err;
-		}
-	
-	/* p prime? */
-	r = BN_is_prime_ex(key->p, BN_prime_checks, NULL, NULL);
-	if (r != 1)
-		{
-		ret = r;
-		if (r != 0)
-			goto err;
-		RSAerr(RSA_F_RSA_CHECK_KEY, RSA_R_P_NOT_PRIME);
-		}
-	
-	/* q prime? */
-	r = BN_is_prime_ex(key->q, BN_prime_checks, NULL, NULL);
-	if (r != 1)
-		{
-		ret = r;
-		if (r != 0)
-			goto err;
-		RSAerr(RSA_F_RSA_CHECK_KEY, RSA_R_Q_NOT_PRIME);
-		}
-	
-	/* n = p*q? */
-	r = BN_mul(i, key->p, key->q, ctx);
-	if (!r) { ret = -1; goto err; }
-	
-	if (BN_cmp(i, key->n) != 0)
-		{
-		ret = 0;
-		RSAerr(RSA_F_RSA_CHECK_KEY, RSA_R_N_DOES_NOT_EQUAL_P_Q);
-		}
-	
-	/* d*e = 1  mod lcm(p-1,q-1)? */
-
-	r = BN_sub(i, key->p, BN_value_one());
-	if (!r) { ret = -1; goto err; }
-	r = BN_sub(j, key->q, BN_value_one());
-	if (!r) { ret = -1; goto err; }
-
-	/* now compute k = lcm(i,j) */
-	r = BN_mul(l, i, j, ctx);
-	if (!r) { ret = -1; goto err; }
-	r = BN_gcd(m, i, j, ctx);
-	if (!r) { ret = -1; goto err; }
-	r = BN_div(k, NULL, l, m, ctx); /* remainder is 0 */
-	if (!r) { ret = -1; goto err; }
-
-	r = BN_mod_mul(i, key->d, key->e, k, ctx);
-	if (!r) { ret = -1; goto err; }
-
-	if (!BN_is_one(i))
-		{
-		ret = 0;
-		RSAerr(RSA_F_RSA_CHECK_KEY, RSA_R_D_E_NOT_CONGRUENT_TO_1);
-		}
-	
-	if (key->dmp1 != NULL && key->dmq1 != NULL && key->iqmp != NULL)
-		{
-		/* dmp1 = d mod (p-1)? */
-		r = BN_sub(i, key->p, BN_value_one());
-		if (!r) { ret = -1; goto err; }
-
-		r = BN_mod(j, key->d, i, ctx);
-		if (!r) { ret = -1; goto err; }
-
-		if (BN_cmp(j, key->dmp1) != 0)
-			{
-			ret = 0;
-			RSAerr(RSA_F_RSA_CHECK_KEY,
-				RSA_R_DMP1_NOT_CONGRUENT_TO_D);
-			}
-	
-		/* dmq1 = d mod (q-1)? */    
-		r = BN_sub(i, key->q, BN_value_one());
-		if (!r) { ret = -1; goto err; }
-	
-		r = BN_mod(j, key->d, i, ctx);
-		if (!r) { ret = -1; goto err; }
-
-		if (BN_cmp(j, key->dmq1) != 0)
-			{
-			ret = 0;
-			RSAerr(RSA_F_RSA_CHECK_KEY,
-				RSA_R_DMQ1_NOT_CONGRUENT_TO_D);
-			}
-	
-		/* iqmp = q^-1 mod p? */
-		if(!BN_mod_inverse(i, key->q, key->p, ctx))
-			{
-			ret = -1;
-			goto err;
-			}
-
-		if (BN_cmp(i, key->iqmp) != 0)
-			{
-			ret = 0;
-			RSAerr(RSA_F_RSA_CHECK_KEY,
-				RSA_R_IQMP_NOT_INVERSE_OF_Q);
-			}
-		}
-
- err:
-	if (i != NULL) BN_free(i);
-	if (j != NULL) BN_free(j);
-	if (k != NULL) BN_free(k);
-	if (l != NULL) BN_free(l);
-	if (m != NULL) BN_free(m);
-	if (ctx != NULL) BN_CTX_free(ctx);
-	return (ret);
-	}
diff --git a/crypto/openssl/crypto/rsa/rsa_depr.c b/crypto/openssl/crypto/rsa/rsa_depr.c
deleted file mode 100644
index a859ded987a2..000000000000
--- a/crypto/openssl/crypto/rsa/rsa_depr.c
+++ /dev/null
@@ -1,101 +0,0 @@
-/* crypto/rsa/rsa_depr.c */
-/* ====================================================================
- * Copyright (c) 1998-2002 The OpenSSL Project.  All rights reserved.
- *
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions
- * are met:
- *
- * 1. Redistributions of source code must retain the above copyright
- *    notice, this list of conditions and the following disclaimer. 
- *
- * 2. Redistributions in binary form must reproduce the above copyright
- *    notice, this list of conditions and the following disclaimer in
- *    the documentation and/or other materials provided with the
- *    distribution.
- *
- * 3. All advertising materials mentioning features or use of this
- *    software must display the following acknowledgment:
- *    "This product includes software developed by the OpenSSL Project
- *    for use in the OpenSSL Toolkit. (http://www.openssl.org/)"
- *
- * 4. The names "OpenSSL Toolkit" and "OpenSSL Project" must not be used to
- *    endorse or promote products derived from this software without
- *    prior written permission. For written permission, please contact
- *    openssl-core@openssl.org.
- *
- * 5. Products derived from this software may not be called "OpenSSL"
- *    nor may "OpenSSL" appear in their names without prior written
- *    permission of the OpenSSL Project.
- *
- * 6. Redistributions of any form whatsoever must retain the following
- *    acknowledgment:
- *    "This product includes software developed by the OpenSSL Project
- *    for use in the OpenSSL Toolkit (http://www.openssl.org/)"
- *
- * THIS SOFTWARE IS PROVIDED BY THE OpenSSL PROJECT ``AS IS'' AND ANY
- * EXPRESSED OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
- * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR
- * PURPOSE ARE DISCLAIMED.  IN NO EVENT SHALL THE OpenSSL PROJECT OR
- * ITS CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
- * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
- * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
- * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
- * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
- * STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
- * ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED
- * OF THE POSSIBILITY OF SUCH DAMAGE.
- * ====================================================================
- *
- * This product includes cryptographic software written by Eric Young
- * (eay@cryptsoft.com).  This product includes software written by Tim
- * Hudson (tjh@cryptsoft.com).
- *
- */
-
-/* NB: This file contains deprecated functions (compatibility wrappers to the
- * "new" versions). */
-
-#include <stdio.h>
-#include <time.h>
-#include "cryptlib.h"
-#include <openssl/bn.h>
-#include <openssl/rsa.h>
-
-#ifdef OPENSSL_NO_DEPRECATED
-
-static void *dummy=&dummy;
-
-#else
-
-RSA *RSA_generate_key(int bits, unsigned long e_value,
-	     void (*callback)(int,int,void *), void *cb_arg)
-	{
-	BN_GENCB cb;
-	int i;
-	RSA *rsa = RSA_new();
-	BIGNUM *e = BN_new();
-
-	if(!rsa || !e) goto err;
-
-	/* The problem is when building with 8, 16, or 32 BN_ULONG,
-	 * unsigned long can be larger */
-	for (i=0; i<(int)sizeof(unsigned long)*8; i++)
-		{
-		if (e_value & (1UL<<i))
-			if (BN_set_bit(e,i) == 0)
-				goto err;
-		}
-
-	BN_GENCB_set_old(&cb, callback, cb_arg);
-
-	if(RSA_generate_key_ex(rsa, bits, e, &cb)) {
-		BN_free(e);
-		return rsa;
-	}
-err:
-	if(e) BN_free(e);
-	if(rsa) RSA_free(rsa);
-	return 0;
-	}
-#endif
diff --git a/crypto/openssl/crypto/rsa/rsa_eay.c b/crypto/openssl/crypto/rsa/rsa_eay.c
deleted file mode 100644
index e7b7a9c4fc38..000000000000
--- a/crypto/openssl/crypto/rsa/rsa_eay.c
+++ /dev/null
@@ -1,827 +0,0 @@
-/* crypto/rsa/rsa_eay.c */
-/* Copyright (C) 1995-1998 Eric Young (eay@cryptsoft.com)
- * All rights reserved.
- *
- * This package is an SSL implementation written
- * by Eric Young (eay@cryptsoft.com).
- * The implementation was written so as to conform with Netscapes SSL.
- * 
- * This library is free for commercial and non-commercial use as long as
- * the following conditions are aheared to.  The following conditions
- * apply to all code found in this distribution, be it the RC4, RSA,
- * lhash, DES, etc., code; not just the SSL code.  The SSL documentation
- * included with this distribution is covered by the same copyright terms
- * except that the holder is Tim Hudson (tjh@cryptsoft.com).
- * 
- * Copyright remains Eric Young's, and as such any Copyright notices in
- * the code are not to be removed.
- * If this package is used in a product, Eric Young should be given attribution
- * as the author of the parts of the library used.
- * This can be in the form of a textual message at program startup or
- * in documentation (online or textual) provided with the package.
- * 
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions
- * are met:
- * 1. Redistributions of source code must retain the copyright
- *    notice, this list of conditions and the following disclaimer.
- * 2. Redistributions in binary form must reproduce the above copyright
- *    notice, this list of conditions and the following disclaimer in the
- *    documentation and/or other materials provided with the distribution.
- * 3. All advertising materials mentioning features or use of this software
- *    must display the following acknowledgement:
- *    "This product includes cryptographic software written by
- *     Eric Young (eay@cryptsoft.com)"
- *    The word 'cryptographic' can be left out if the rouines from the library
- *    being used are not cryptographic related :-).
- * 4. If you include any Windows specific code (or a derivative thereof) from 
- *    the apps directory (application code) you must include an acknowledgement:
- *    "This product includes software written by Tim Hudson (tjh@cryptsoft.com)"
- * 
- * THIS SOFTWARE IS PROVIDED BY ERIC YOUNG ``AS IS'' AND
- * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
- * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
- * ARE DISCLAIMED.  IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE
- * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
- * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
- * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
- * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
- * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
- * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
- * SUCH DAMAGE.
- * 
- * The licence and distribution terms for any publically available version or
- * derivative of this code cannot be changed.  i.e. this code cannot simply be
- * copied and put under another distribution licence
- * [including the GNU Public Licence.]
- */
-/* ====================================================================
- * Copyright (c) 1998-2006 The OpenSSL Project.  All rights reserved.
- *
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions
- * are met:
- *
- * 1. Redistributions of source code must retain the above copyright
- *    notice, this list of conditions and the following disclaimer. 
- *
- * 2. Redistributions in binary form must reproduce the above copyright
- *    notice, this list of conditions and the following disclaimer in
- *    the documentation and/or other materials provided with the
- *    distribution.
- *
- * 3. All advertising materials mentioning features or use of this
- *    software must display the following acknowledgment:
- *    "This product includes software developed by the OpenSSL Project
- *    for use in the OpenSSL Toolkit. (http://www.openssl.org/)"
- *
- * 4. The names "OpenSSL Toolkit" and "OpenSSL Project" must not be used to
- *    endorse or promote products derived from this software without
- *    prior written permission. For written permission, please contact
- *    openssl-core@openssl.org.
- *
- * 5. Products derived from this software may not be called "OpenSSL"
- *    nor may "OpenSSL" appear in their names without prior written
- *    permission of the OpenSSL Project.
- *
- * 6. Redistributions of any form whatsoever must retain the following
- *    acknowledgment:
- *    "This product includes software developed by the OpenSSL Project
- *    for use in the OpenSSL Toolkit (http://www.openssl.org/)"
- *
- * THIS SOFTWARE IS PROVIDED BY THE OpenSSL PROJECT ``AS IS'' AND ANY
- * EXPRESSED OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
- * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR
- * PURPOSE ARE DISCLAIMED.  IN NO EVENT SHALL THE OpenSSL PROJECT OR
- * ITS CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
- * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
- * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
- * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
- * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
- * STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
- * ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED
- * OF THE POSSIBILITY OF SUCH DAMAGE.
- * ====================================================================
- *
- * This product includes cryptographic software written by Eric Young
- * (eay@cryptsoft.com).  This product includes software written by Tim
- * Hudson (tjh@cryptsoft.com).
- *
- */
-
-#include <stdio.h>
-#include "cryptlib.h"
-#include <openssl/bn.h>
-#include <openssl/rsa.h>
-#include <openssl/rand.h>
-
-#ifndef RSA_NULL
-
-static int RSA_eay_public_encrypt(int flen, const unsigned char *from,
-		unsigned char *to, RSA *rsa,int padding);
-static int RSA_eay_private_encrypt(int flen, const unsigned char *from,
-		unsigned char *to, RSA *rsa,int padding);
-static int RSA_eay_public_decrypt(int flen, const unsigned char *from,
-		unsigned char *to, RSA *rsa,int padding);
-static int RSA_eay_private_decrypt(int flen, const unsigned char *from,
-		unsigned char *to, RSA *rsa,int padding);
-static int RSA_eay_mod_exp(BIGNUM *r0, const BIGNUM *i, RSA *rsa, BN_CTX *ctx);
-static int RSA_eay_init(RSA *rsa);
-static int RSA_eay_finish(RSA *rsa);
-static RSA_METHOD rsa_pkcs1_eay_meth={
-	"Eric Young's PKCS#1 RSA",
-	RSA_eay_public_encrypt,
-	RSA_eay_public_decrypt, /* signature verification */
-	RSA_eay_private_encrypt, /* signing */
-	RSA_eay_private_decrypt,
-	RSA_eay_mod_exp,
-	BN_mod_exp_mont, /* XXX probably we should not use Montgomery if  e == 3 */
-	RSA_eay_init,
-	RSA_eay_finish,
-	0, /* flags */
-	NULL,
-	0, /* rsa_sign */
-	0, /* rsa_verify */
-	NULL /* rsa_keygen */
-	};
-
-const RSA_METHOD *RSA_PKCS1_SSLeay(void)
-	{
-	return(&rsa_pkcs1_eay_meth);
-	}
-
-/* Usage example;
- *    MONT_HELPER(rsa, bn_ctx, p, rsa->flags & RSA_FLAG_CACHE_PRIVATE, goto err);
- */
-#define MONT_HELPER(rsa, ctx, m, pre_cond, err_instr) \
-	if((pre_cond) && ((rsa)->_method_mod_##m == NULL) && \
-			!BN_MONT_CTX_set_locked(&((rsa)->_method_mod_##m), \
-				CRYPTO_LOCK_RSA, \
-				(rsa)->m, (ctx))) \
-		err_instr
-
-static int RSA_eay_public_encrypt(int flen, const unsigned char *from,
-	     unsigned char *to, RSA *rsa, int padding)
-	{
-	BIGNUM *f,*ret;
-	int i,j,k,num=0,r= -1;
-	unsigned char *buf=NULL;
-	BN_CTX *ctx=NULL;
-
-	if (BN_num_bits(rsa->n) > OPENSSL_RSA_MAX_MODULUS_BITS)
-		{
-		RSAerr(RSA_F_RSA_EAY_PUBLIC_ENCRYPT, RSA_R_MODULUS_TOO_LARGE);
-		return -1;
-		}
-
-	if (BN_ucmp(rsa->n, rsa->e) <= 0)
-		{
-		RSAerr(RSA_F_RSA_EAY_PUBLIC_ENCRYPT, RSA_R_BAD_E_VALUE);
-		return -1;
-		}
-
-	/* for large moduli, enforce exponent limit */
-	if (BN_num_bits(rsa->n) > OPENSSL_RSA_SMALL_MODULUS_BITS)
-		{
-		if (BN_num_bits(rsa->e) > OPENSSL_RSA_MAX_PUBEXP_BITS)
-			{
-			RSAerr(RSA_F_RSA_EAY_PUBLIC_ENCRYPT, RSA_R_BAD_E_VALUE);
-			return -1;
-			}
-		}
-	
-	if ((ctx=BN_CTX_new()) == NULL) goto err;
-	BN_CTX_start(ctx);
-	f = BN_CTX_get(ctx);
-	ret = BN_CTX_get(ctx);
-	num=BN_num_bytes(rsa->n);
-	buf = OPENSSL_malloc(num);
-	if (!f || !ret || !buf)
-		{
-		RSAerr(RSA_F_RSA_EAY_PUBLIC_ENCRYPT,ERR_R_MALLOC_FAILURE);
-		goto err;
-		}
-
-	switch (padding)
-		{
-	case RSA_PKCS1_PADDING:
-		i=RSA_padding_add_PKCS1_type_2(buf,num,from,flen);
-		break;
-#ifndef OPENSSL_NO_SHA
-	case RSA_PKCS1_OAEP_PADDING:
-	        i=RSA_padding_add_PKCS1_OAEP(buf,num,from,flen,NULL,0);
-		break;
-#endif
-	case RSA_SSLV23_PADDING:
-		i=RSA_padding_add_SSLv23(buf,num,from,flen);
-		break;
-	case RSA_NO_PADDING:
-		i=RSA_padding_add_none(buf,num,from,flen);
-		break;
-	default:
-		RSAerr(RSA_F_RSA_EAY_PUBLIC_ENCRYPT,RSA_R_UNKNOWN_PADDING_TYPE);
-		goto err;
-		}
-	if (i <= 0) goto err;
-
-	if (BN_bin2bn(buf,num,f) == NULL) goto err;
-	
-	if (BN_ucmp(f, rsa->n) >= 0)
-		{	
-		/* usually the padding functions would catch this */
-		RSAerr(RSA_F_RSA_EAY_PUBLIC_ENCRYPT,RSA_R_DATA_TOO_LARGE_FOR_MODULUS);
-		goto err;
-		}
-
-	MONT_HELPER(rsa, ctx, n, rsa->flags & RSA_FLAG_CACHE_PUBLIC, goto err);
-
-	if (!rsa->meth->bn_mod_exp(ret,f,rsa->e,rsa->n,ctx,
-		rsa->_method_mod_n)) goto err;
-
-	/* put in leading 0 bytes if the number is less than the
-	 * length of the modulus */
-	j=BN_num_bytes(ret);
-	i=BN_bn2bin(ret,&(to[num-j]));
-	for (k=0; k<(num-i); k++)
-		to[k]=0;
-
-	r=num;
-err:
-	if (ctx != NULL)
-		{
-		BN_CTX_end(ctx);
-		BN_CTX_free(ctx);
-		}
-	if (buf != NULL) 
-		{
-		OPENSSL_cleanse(buf,num);
-		OPENSSL_free(buf);
-		}
-	return(r);
-	}
-
-static BN_BLINDING *rsa_get_blinding(RSA *rsa, int *local, BN_CTX *ctx)
-{
-	BN_BLINDING *ret;
-	int got_write_lock = 0;
-
-	CRYPTO_r_lock(CRYPTO_LOCK_RSA);
-
-	if (rsa->blinding == NULL)
-		{
-		CRYPTO_r_unlock(CRYPTO_LOCK_RSA);
-		CRYPTO_w_lock(CRYPTO_LOCK_RSA);
-		got_write_lock = 1;
-
-		if (rsa->blinding == NULL)
-			rsa->blinding = RSA_setup_blinding(rsa, ctx);
-		}
-
-	ret = rsa->blinding;
-	if (ret == NULL)
-		goto err;
-
-	if (BN_BLINDING_get_thread_id(ret) == CRYPTO_thread_id())
-		{
-		/* rsa->blinding is ours! */
-
-		*local = 1;
-		}
-	else
-		{
-		/* resort to rsa->mt_blinding instead */
-
-		*local = 0; /* instructs rsa_blinding_convert(), rsa_blinding_invert()
-		             * that the BN_BLINDING is shared, meaning that accesses
-		             * require locks, and that the blinding factor must be
-		             * stored outside the BN_BLINDING
-		             */
-
-		if (rsa->mt_blinding == NULL)
-			{
-			if (!got_write_lock)
-				{
-				CRYPTO_r_unlock(CRYPTO_LOCK_RSA);
-				CRYPTO_w_lock(CRYPTO_LOCK_RSA);
-				got_write_lock = 1;
-				}
-			
-			if (rsa->mt_blinding == NULL)
-				rsa->mt_blinding = RSA_setup_blinding(rsa, ctx);
-			}
-		ret = rsa->mt_blinding;
-		}
-
- err:
-	if (got_write_lock)
-		CRYPTO_w_unlock(CRYPTO_LOCK_RSA);
-	else
-		CRYPTO_r_unlock(CRYPTO_LOCK_RSA);
-	return ret;
-}
-
-static int rsa_blinding_convert(BN_BLINDING *b, int local, BIGNUM *f,
-	BIGNUM *r, BN_CTX *ctx)
-{
-	if (local)
-		return BN_BLINDING_convert_ex(f, NULL, b, ctx);
-	else
-		{
-		int ret;
-		CRYPTO_r_lock(CRYPTO_LOCK_RSA_BLINDING);
-		ret = BN_BLINDING_convert_ex(f, r, b, ctx);
-		CRYPTO_r_unlock(CRYPTO_LOCK_RSA_BLINDING);
-		return ret;
-		}
-}
-
-static int rsa_blinding_invert(BN_BLINDING *b, int local, BIGNUM *f,
-	BIGNUM *r, BN_CTX *ctx)
-{
-	if (local)
-		return BN_BLINDING_invert_ex(f, NULL, b, ctx);
-	else
-		{
-		int ret;
-		CRYPTO_w_lock(CRYPTO_LOCK_RSA_BLINDING);
-		ret = BN_BLINDING_invert_ex(f, r, b, ctx);
-		CRYPTO_w_unlock(CRYPTO_LOCK_RSA_BLINDING);
-		return ret;
-		}
-}
-
-/* signing */
-static int RSA_eay_private_encrypt(int flen, const unsigned char *from,
-	     unsigned char *to, RSA *rsa, int padding)
-	{
-	BIGNUM *f, *ret, *br, *res;
-	int i,j,k,num=0,r= -1;
-	unsigned char *buf=NULL;
-	BN_CTX *ctx=NULL;
-	int local_blinding = 0;
-	BN_BLINDING *blinding = NULL;
-
-	if ((ctx=BN_CTX_new()) == NULL) goto err;
-	BN_CTX_start(ctx);
-	f   = BN_CTX_get(ctx);
-	br  = BN_CTX_get(ctx);
-	ret = BN_CTX_get(ctx);
-	num = BN_num_bytes(rsa->n);
-	buf = OPENSSL_malloc(num);
-	if(!f || !ret || !buf)
-		{
-		RSAerr(RSA_F_RSA_EAY_PRIVATE_ENCRYPT,ERR_R_MALLOC_FAILURE);
-		goto err;
-		}
-
-	switch (padding)
-		{
-	case RSA_PKCS1_PADDING:
-		i=RSA_padding_add_PKCS1_type_1(buf,num,from,flen);
-		break;
-	case RSA_X931_PADDING:
-		i=RSA_padding_add_X931(buf,num,from,flen);
-		break;
-	case RSA_NO_PADDING:
-		i=RSA_padding_add_none(buf,num,from,flen);
-		break;
-	case RSA_SSLV23_PADDING:
-	default:
-		RSAerr(RSA_F_RSA_EAY_PRIVATE_ENCRYPT,RSA_R_UNKNOWN_PADDING_TYPE);
-		goto err;
-		}
-	if (i <= 0) goto err;
-
-	if (BN_bin2bn(buf,num,f) == NULL) goto err;
-	
-	if (BN_ucmp(f, rsa->n) >= 0)
-		{	
-		/* usually the padding functions would catch this */
-		RSAerr(RSA_F_RSA_EAY_PRIVATE_ENCRYPT,RSA_R_DATA_TOO_LARGE_FOR_MODULUS);
-		goto err;
-		}
-
-	if (!(rsa->flags & RSA_FLAG_NO_BLINDING))
-		{
-		blinding = rsa_get_blinding(rsa, &local_blinding, ctx);
-		if (blinding == NULL)
-			{
-			RSAerr(RSA_F_RSA_EAY_PRIVATE_ENCRYPT, ERR_R_INTERNAL_ERROR);
-			goto err;
-			}
-		}
-	
-	if (blinding != NULL)
-		if (!rsa_blinding_convert(blinding, local_blinding, f, br, ctx))
-			goto err;
-
-	if ( (rsa->flags & RSA_FLAG_EXT_PKEY) ||
-		((rsa->p != NULL) &&
-		(rsa->q != NULL) &&
-		(rsa->dmp1 != NULL) &&
-		(rsa->dmq1 != NULL) &&
-		(rsa->iqmp != NULL)) )
-		{ 
-		if (!rsa->meth->rsa_mod_exp(ret, f, rsa, ctx)) goto err;
-		}
-	else
-		{
-		BIGNUM local_d;
-		BIGNUM *d = NULL;
-		
-		if (!(rsa->flags & RSA_FLAG_NO_EXP_CONSTTIME))
-			{
-			BN_init(&local_d);
-			d = &local_d;
-			BN_with_flags(d, rsa->d, BN_FLG_EXP_CONSTTIME);
-			}
-		else
-			d = rsa->d;
-
-		MONT_HELPER(rsa, ctx, n, rsa->flags & RSA_FLAG_CACHE_PUBLIC, goto err);
-
-		if (!rsa->meth->bn_mod_exp(ret,f,d,rsa->n,ctx,
-				rsa->_method_mod_n)) goto err;
-		}
-
-	if (blinding)
-		if (!rsa_blinding_invert(blinding, local_blinding, ret, br, ctx))
-			goto err;
-
-	if (padding == RSA_X931_PADDING)
-		{
-		BN_sub(f, rsa->n, ret);
-		if (BN_cmp(ret, f))
-			res = f;
-		else
-			res = ret;
-		}
-	else
-		res = ret;
-
-	/* put in leading 0 bytes if the number is less than the
-	 * length of the modulus */
-	j=BN_num_bytes(res);
-	i=BN_bn2bin(res,&(to[num-j]));
-	for (k=0; k<(num-i); k++)
-		to[k]=0;
-
-	r=num;
-err:
-	if (ctx != NULL)
-		{
-		BN_CTX_end(ctx);
-		BN_CTX_free(ctx);
-		}
-	if (buf != NULL)
-		{
-		OPENSSL_cleanse(buf,num);
-		OPENSSL_free(buf);
-		}
-	return(r);
-	}
-
-static int RSA_eay_private_decrypt(int flen, const unsigned char *from,
-	     unsigned char *to, RSA *rsa, int padding)
-	{
-	BIGNUM *f, *ret, *br;
-	int j,num=0,r= -1;
-	unsigned char *p;
-	unsigned char *buf=NULL;
-	BN_CTX *ctx=NULL;
-	int local_blinding = 0;
-	BN_BLINDING *blinding = NULL;
-
-	if((ctx = BN_CTX_new()) == NULL) goto err;
-	BN_CTX_start(ctx);
-	f   = BN_CTX_get(ctx);
-	br  = BN_CTX_get(ctx);
-	ret = BN_CTX_get(ctx);
-	num = BN_num_bytes(rsa->n);
-	buf = OPENSSL_malloc(num);
-	if(!f || !ret || !buf)
-		{
-		RSAerr(RSA_F_RSA_EAY_PRIVATE_DECRYPT,ERR_R_MALLOC_FAILURE);
-		goto err;
-		}
-
-	/* This check was for equality but PGP does evil things
-	 * and chops off the top '0' bytes */
-	if (flen > num)
-		{
-		RSAerr(RSA_F_RSA_EAY_PRIVATE_DECRYPT,RSA_R_DATA_GREATER_THAN_MOD_LEN);
-		goto err;
-		}
-
-	/* make data into a big number */
-	if (BN_bin2bn(from,(int)flen,f) == NULL) goto err;
-
-	if (BN_ucmp(f, rsa->n) >= 0)
-		{
-		RSAerr(RSA_F_RSA_EAY_PRIVATE_DECRYPT,RSA_R_DATA_TOO_LARGE_FOR_MODULUS);
-		goto err;
-		}
-
-	if (!(rsa->flags & RSA_FLAG_NO_BLINDING))
-		{
-		blinding = rsa_get_blinding(rsa, &local_blinding, ctx);
-		if (blinding == NULL)
-			{
-			RSAerr(RSA_F_RSA_EAY_PRIVATE_DECRYPT, ERR_R_INTERNAL_ERROR);
-			goto err;
-			}
-		}
-	
-	if (blinding != NULL)
-		if (!rsa_blinding_convert(blinding, local_blinding, f, br, ctx))
-			goto err;
-
-	/* do the decrypt */
-	if ( (rsa->flags & RSA_FLAG_EXT_PKEY) ||
-		((rsa->p != NULL) &&
-		(rsa->q != NULL) &&
-		(rsa->dmp1 != NULL) &&
-		(rsa->dmq1 != NULL) &&
-		(rsa->iqmp != NULL)) )
-		{
-		if (!rsa->meth->rsa_mod_exp(ret, f, rsa, ctx)) goto err;
-		}
-	else
-		{
-		BIGNUM local_d;
-		BIGNUM *d = NULL;
-		
-		if (!(rsa->flags & RSA_FLAG_NO_EXP_CONSTTIME))
-			{
-			d = &local_d;
-			BN_with_flags(d, rsa->d, BN_FLG_EXP_CONSTTIME);
-			}
-		else
-			d = rsa->d;
-
-		MONT_HELPER(rsa, ctx, n, rsa->flags & RSA_FLAG_CACHE_PUBLIC, goto err);
-		if (!rsa->meth->bn_mod_exp(ret,f,d,rsa->n,ctx,
-				rsa->_method_mod_n))
-		  goto err;
-		}
-
-	if (blinding)
-		if (!rsa_blinding_invert(blinding, local_blinding, ret, br, ctx))
-			goto err;
-
-	p=buf;
-	j=BN_bn2bin(ret,p); /* j is only used with no-padding mode */
-
-	switch (padding)
-		{
-	case RSA_PKCS1_PADDING:
-		r=RSA_padding_check_PKCS1_type_2(to,num,buf,j,num);
-		break;
-#ifndef OPENSSL_NO_SHA
-        case RSA_PKCS1_OAEP_PADDING:
-	        r=RSA_padding_check_PKCS1_OAEP(to,num,buf,j,num,NULL,0);
-                break;
-#endif
- 	case RSA_SSLV23_PADDING:
-		r=RSA_padding_check_SSLv23(to,num,buf,j,num);
-		break;
-	case RSA_NO_PADDING:
-		r=RSA_padding_check_none(to,num,buf,j,num);
-		break;
-	default:
-		RSAerr(RSA_F_RSA_EAY_PRIVATE_DECRYPT,RSA_R_UNKNOWN_PADDING_TYPE);
-		goto err;
-		}
-	if (r < 0)
-		RSAerr(RSA_F_RSA_EAY_PRIVATE_DECRYPT,RSA_R_PADDING_CHECK_FAILED);
-
-err:
-	if (ctx != NULL)
-		{
-		BN_CTX_end(ctx);
-		BN_CTX_free(ctx);
-		}
-	if (buf != NULL)
-		{
-		OPENSSL_cleanse(buf,num);
-		OPENSSL_free(buf);
-		}
-	return(r);
-	}
-
-/* signature verification */
-static int RSA_eay_public_decrypt(int flen, const unsigned char *from,
-	     unsigned char *to, RSA *rsa, int padding)
-	{
-	BIGNUM *f,*ret;
-	int i,num=0,r= -1;
-	unsigned char *p;
-	unsigned char *buf=NULL;
-	BN_CTX *ctx=NULL;
-
-	if (BN_num_bits(rsa->n) > OPENSSL_RSA_MAX_MODULUS_BITS)
-		{
-		RSAerr(RSA_F_RSA_EAY_PUBLIC_DECRYPT, RSA_R_MODULUS_TOO_LARGE);
-		return -1;
-		}
-
-	if (BN_ucmp(rsa->n, rsa->e) <= 0)
-		{
-		RSAerr(RSA_F_RSA_EAY_PUBLIC_DECRYPT, RSA_R_BAD_E_VALUE);
-		return -1;
-		}
-
-	/* for large moduli, enforce exponent limit */
-	if (BN_num_bits(rsa->n) > OPENSSL_RSA_SMALL_MODULUS_BITS)
-		{
-		if (BN_num_bits(rsa->e) > OPENSSL_RSA_MAX_PUBEXP_BITS)
-			{
-			RSAerr(RSA_F_RSA_EAY_PUBLIC_DECRYPT, RSA_R_BAD_E_VALUE);
-			return -1;
-			}
-		}
-	
-	if((ctx = BN_CTX_new()) == NULL) goto err;
-	BN_CTX_start(ctx);
-	f = BN_CTX_get(ctx);
-	ret = BN_CTX_get(ctx);
-	num=BN_num_bytes(rsa->n);
-	buf = OPENSSL_malloc(num);
-	if(!f || !ret || !buf)
-		{
-		RSAerr(RSA_F_RSA_EAY_PUBLIC_DECRYPT,ERR_R_MALLOC_FAILURE);
-		goto err;
-		}
-
-	/* This check was for equality but PGP does evil things
-	 * and chops off the top '0' bytes */
-	if (flen > num)
-		{
-		RSAerr(RSA_F_RSA_EAY_PUBLIC_DECRYPT,RSA_R_DATA_GREATER_THAN_MOD_LEN);
-		goto err;
-		}
-
-	if (BN_bin2bn(from,flen,f) == NULL) goto err;
-
-	if (BN_ucmp(f, rsa->n) >= 0)
-		{
-		RSAerr(RSA_F_RSA_EAY_PUBLIC_DECRYPT,RSA_R_DATA_TOO_LARGE_FOR_MODULUS);
-		goto err;
-		}
-
-	MONT_HELPER(rsa, ctx, n, rsa->flags & RSA_FLAG_CACHE_PUBLIC, goto err);
-
-	if (!rsa->meth->bn_mod_exp(ret,f,rsa->e,rsa->n,ctx,
-		rsa->_method_mod_n)) goto err;
-
-	if ((padding == RSA_X931_PADDING) && ((ret->d[0] & 0xf) != 12))
-		BN_sub(ret, rsa->n, ret);
-
-	p=buf;
-	i=BN_bn2bin(ret,p);
-
-	switch (padding)
-		{
-	case RSA_PKCS1_PADDING:
-		r=RSA_padding_check_PKCS1_type_1(to,num,buf,i,num);
-		break;
-	case RSA_X931_PADDING:
-		r=RSA_padding_check_X931(to,num,buf,i,num);
-		break;
-	case RSA_NO_PADDING:
-		r=RSA_padding_check_none(to,num,buf,i,num);
-		break;
-	default:
-		RSAerr(RSA_F_RSA_EAY_PUBLIC_DECRYPT,RSA_R_UNKNOWN_PADDING_TYPE);
-		goto err;
-		}
-	if (r < 0)
-		RSAerr(RSA_F_RSA_EAY_PUBLIC_DECRYPT,RSA_R_PADDING_CHECK_FAILED);
-
-err:
-	if (ctx != NULL)
-		{
-		BN_CTX_end(ctx);
-		BN_CTX_free(ctx);
-		}
-	if (buf != NULL)
-		{
-		OPENSSL_cleanse(buf,num);
-		OPENSSL_free(buf);
-		}
-	return(r);
-	}
-
-static int RSA_eay_mod_exp(BIGNUM *r0, const BIGNUM *I, RSA *rsa, BN_CTX *ctx)
-	{
-	BIGNUM *r1,*m1,*vrfy;
-	BIGNUM local_dmp1, local_dmq1;
-	BIGNUM *dmp1, *dmq1;
-	int ret=0;
-
-	BN_CTX_start(ctx);
-	r1 = BN_CTX_get(ctx);
-	m1 = BN_CTX_get(ctx);
-	vrfy = BN_CTX_get(ctx);
-
-	MONT_HELPER(rsa, ctx, p, rsa->flags & RSA_FLAG_CACHE_PRIVATE, goto err);
-	MONT_HELPER(rsa, ctx, q, rsa->flags & RSA_FLAG_CACHE_PRIVATE, goto err);
-	MONT_HELPER(rsa, ctx, n, rsa->flags & RSA_FLAG_CACHE_PUBLIC, goto err);
-
-	if (!BN_mod(r1,I,rsa->q,ctx)) goto err;
-	if (!(rsa->flags & RSA_FLAG_NO_EXP_CONSTTIME))
-		{
-		dmq1 = &local_dmq1;
-		BN_with_flags(dmq1, rsa->dmq1, BN_FLG_EXP_CONSTTIME);
-		}
-	else
-		dmq1 = rsa->dmq1;
-	if (!rsa->meth->bn_mod_exp(m1,r1,dmq1,rsa->q,ctx,
-		rsa->_method_mod_q)) goto err;
-
-	if (!BN_mod(r1,I,rsa->p,ctx)) goto err;
-	if (!(rsa->flags & RSA_FLAG_NO_EXP_CONSTTIME))
-		{
-		dmp1 = &local_dmp1;
-		BN_with_flags(dmp1, rsa->dmp1, BN_FLG_EXP_CONSTTIME);
-		}
-	else
-		dmp1 = rsa->dmp1;
-	if (!rsa->meth->bn_mod_exp(r0,r1,dmp1,rsa->p,ctx,
-		rsa->_method_mod_p)) goto err;
-
-	if (!BN_sub(r0,r0,m1)) goto err;
-	/* This will help stop the size of r0 increasing, which does
-	 * affect the multiply if it optimised for a power of 2 size */
-	if (BN_is_negative(r0))
-		if (!BN_add(r0,r0,rsa->p)) goto err;
-
-	if (!BN_mul(r1,r0,rsa->iqmp,ctx)) goto err;
-	if (!BN_mod(r0,r1,rsa->p,ctx)) goto err;
-	/* If p < q it is occasionally possible for the correction of
-         * adding 'p' if r0 is negative above to leave the result still
-	 * negative. This can break the private key operations: the following
-	 * second correction should *always* correct this rare occurrence.
-	 * This will *never* happen with OpenSSL generated keys because
-         * they ensure p > q [steve]
-         */
-	if (BN_is_negative(r0))
-		if (!BN_add(r0,r0,rsa->p)) goto err;
-	if (!BN_mul(r1,r0,rsa->q,ctx)) goto err;
-	if (!BN_add(r0,r1,m1)) goto err;
-
-	if (rsa->e && rsa->n)
-		{
-		if (!rsa->meth->bn_mod_exp(vrfy,r0,rsa->e,rsa->n,ctx,rsa->_method_mod_n)) goto err;
-		/* If 'I' was greater than (or equal to) rsa->n, the operation
-		 * will be equivalent to using 'I mod n'. However, the result of
-		 * the verify will *always* be less than 'n' so we don't check
-		 * for absolute equality, just congruency. */
-		if (!BN_sub(vrfy, vrfy, I)) goto err;
-		if (!BN_mod(vrfy, vrfy, rsa->n, ctx)) goto err;
-		if (BN_is_negative(vrfy))
-			if (!BN_add(vrfy, vrfy, rsa->n)) goto err;
-		if (!BN_is_zero(vrfy))
-			{
-			/* 'I' and 'vrfy' aren't congruent mod n. Don't leak
-			 * miscalculated CRT output, just do a raw (slower)
-			 * mod_exp and return that instead. */
-
-			BIGNUM local_d;
-			BIGNUM *d = NULL;
-		
-			if (!(rsa->flags & RSA_FLAG_NO_EXP_CONSTTIME))
-				{
-				d = &local_d;
-				BN_with_flags(d, rsa->d, BN_FLG_EXP_CONSTTIME);
-				}
-			else
-				d = rsa->d;
-			if (!rsa->meth->bn_mod_exp(r0,I,d,rsa->n,ctx,
-						   rsa->_method_mod_n)) goto err;
-			}
-		}
-	ret=1;
-err:
-	BN_CTX_end(ctx);
-	return(ret);
-	}
-
-static int RSA_eay_init(RSA *rsa)
-	{
-	rsa->flags|=RSA_FLAG_CACHE_PUBLIC|RSA_FLAG_CACHE_PRIVATE;
-	return(1);
-	}
-
-static int RSA_eay_finish(RSA *rsa)
-	{
-	if (rsa->_method_mod_n != NULL)
-		BN_MONT_CTX_free(rsa->_method_mod_n);
-	if (rsa->_method_mod_p != NULL)
-		BN_MONT_CTX_free(rsa->_method_mod_p);
-	if (rsa->_method_mod_q != NULL)
-		BN_MONT_CTX_free(rsa->_method_mod_q);
-	return(1);
-	}
-
-#endif
diff --git a/crypto/openssl/crypto/rsa/rsa_err.c b/crypto/openssl/crypto/rsa/rsa_err.c
deleted file mode 100644
index fe3ba1b44bbd..000000000000
--- a/crypto/openssl/crypto/rsa/rsa_err.c
+++ /dev/null
@@ -1,171 +0,0 @@
-/* crypto/rsa/rsa_err.c */
-/* ====================================================================
- * Copyright (c) 1999-2005 The OpenSSL Project.  All rights reserved.
- *
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions
- * are met:
- *
- * 1. Redistributions of source code must retain the above copyright
- *    notice, this list of conditions and the following disclaimer. 
- *
- * 2. Redistributions in binary form must reproduce the above copyright
- *    notice, this list of conditions and the following disclaimer in
- *    the documentation and/or other materials provided with the
- *    distribution.
- *
- * 3. All advertising materials mentioning features or use of this
- *    software must display the following acknowledgment:
- *    "This product includes software developed by the OpenSSL Project
- *    for use in the OpenSSL Toolkit. (http://www.OpenSSL.org/)"
- *
- * 4. The names "OpenSSL Toolkit" and "OpenSSL Project" must not be used to
- *    endorse or promote products derived from this software without
- *    prior written permission. For written permission, please contact
- *    openssl-core@OpenSSL.org.
- *
- * 5. Products derived from this software may not be called "OpenSSL"
- *    nor may "OpenSSL" appear in their names without prior written
- *    permission of the OpenSSL Project.
- *
- * 6. Redistributions of any form whatsoever must retain the following
- *    acknowledgment:
- *    "This product includes software developed by the OpenSSL Project
- *    for use in the OpenSSL Toolkit (http://www.OpenSSL.org/)"
- *
- * THIS SOFTWARE IS PROVIDED BY THE OpenSSL PROJECT ``AS IS'' AND ANY
- * EXPRESSED OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
- * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR
- * PURPOSE ARE DISCLAIMED.  IN NO EVENT SHALL THE OpenSSL PROJECT OR
- * ITS CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
- * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
- * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
- * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
- * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
- * STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
- * ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED
- * OF THE POSSIBILITY OF SUCH DAMAGE.
- * ====================================================================
- *
- * This product includes cryptographic software written by Eric Young
- * (eay@cryptsoft.com).  This product includes software written by Tim
- * Hudson (tjh@cryptsoft.com).
- *
- */
-
-/* NOTE: this file was auto generated by the mkerr.pl script: any changes
- * made to it will be overwritten when the script next updates this file,
- * only reason strings will be preserved.
- */
-
-#include <stdio.h>
-#include <openssl/err.h>
-#include <openssl/rsa.h>
-
-/* BEGIN ERROR CODES */
-#ifndef OPENSSL_NO_ERR
-
-#define ERR_FUNC(func) ERR_PACK(ERR_LIB_RSA,func,0)
-#define ERR_REASON(reason) ERR_PACK(ERR_LIB_RSA,0,reason)
-
-static ERR_STRING_DATA RSA_str_functs[]=
-	{
-{ERR_FUNC(RSA_F_MEMORY_LOCK),	"MEMORY_LOCK"},
-{ERR_FUNC(RSA_F_RSA_BUILTIN_KEYGEN),	"RSA_BUILTIN_KEYGEN"},
-{ERR_FUNC(RSA_F_RSA_CHECK_KEY),	"RSA_check_key"},
-{ERR_FUNC(RSA_F_RSA_EAY_PRIVATE_DECRYPT),	"RSA_EAY_PRIVATE_DECRYPT"},
-{ERR_FUNC(RSA_F_RSA_EAY_PRIVATE_ENCRYPT),	"RSA_EAY_PRIVATE_ENCRYPT"},
-{ERR_FUNC(RSA_F_RSA_EAY_PUBLIC_DECRYPT),	"RSA_EAY_PUBLIC_DECRYPT"},
-{ERR_FUNC(RSA_F_RSA_EAY_PUBLIC_ENCRYPT),	"RSA_EAY_PUBLIC_ENCRYPT"},
-{ERR_FUNC(RSA_F_RSA_GENERATE_KEY),	"RSA_generate_key"},
-{ERR_FUNC(RSA_F_RSA_MEMORY_LOCK),	"RSA_memory_lock"},
-{ERR_FUNC(RSA_F_RSA_NEW_METHOD),	"RSA_new_method"},
-{ERR_FUNC(RSA_F_RSA_NULL),	"RSA_NULL"},
-{ERR_FUNC(RSA_F_RSA_NULL_MOD_EXP),	"RSA_NULL_MOD_EXP"},
-{ERR_FUNC(RSA_F_RSA_NULL_PRIVATE_DECRYPT),	"RSA_NULL_PRIVATE_DECRYPT"},
-{ERR_FUNC(RSA_F_RSA_NULL_PRIVATE_ENCRYPT),	"RSA_NULL_PRIVATE_ENCRYPT"},
-{ERR_FUNC(RSA_F_RSA_NULL_PUBLIC_DECRYPT),	"RSA_NULL_PUBLIC_DECRYPT"},
-{ERR_FUNC(RSA_F_RSA_NULL_PUBLIC_ENCRYPT),	"RSA_NULL_PUBLIC_ENCRYPT"},
-{ERR_FUNC(RSA_F_RSA_PADDING_ADD_NONE),	"RSA_padding_add_none"},
-{ERR_FUNC(RSA_F_RSA_PADDING_ADD_PKCS1_OAEP),	"RSA_padding_add_PKCS1_OAEP"},
-{ERR_FUNC(RSA_F_RSA_PADDING_ADD_PKCS1_PSS),	"RSA_padding_add_PKCS1_PSS"},
-{ERR_FUNC(RSA_F_RSA_PADDING_ADD_PKCS1_TYPE_1),	"RSA_padding_add_PKCS1_type_1"},
-{ERR_FUNC(RSA_F_RSA_PADDING_ADD_PKCS1_TYPE_2),	"RSA_padding_add_PKCS1_type_2"},
-{ERR_FUNC(RSA_F_RSA_PADDING_ADD_SSLV23),	"RSA_padding_add_SSLv23"},
-{ERR_FUNC(RSA_F_RSA_PADDING_ADD_X931),	"RSA_padding_add_X931"},
-{ERR_FUNC(RSA_F_RSA_PADDING_CHECK_NONE),	"RSA_padding_check_none"},
-{ERR_FUNC(RSA_F_RSA_PADDING_CHECK_PKCS1_OAEP),	"RSA_padding_check_PKCS1_OAEP"},
-{ERR_FUNC(RSA_F_RSA_PADDING_CHECK_PKCS1_TYPE_1),	"RSA_padding_check_PKCS1_type_1"},
-{ERR_FUNC(RSA_F_RSA_PADDING_CHECK_PKCS1_TYPE_2),	"RSA_padding_check_PKCS1_type_2"},
-{ERR_FUNC(RSA_F_RSA_PADDING_CHECK_SSLV23),	"RSA_padding_check_SSLv23"},
-{ERR_FUNC(RSA_F_RSA_PADDING_CHECK_X931),	"RSA_padding_check_X931"},
-{ERR_FUNC(RSA_F_RSA_PRINT),	"RSA_print"},
-{ERR_FUNC(RSA_F_RSA_PRINT_FP),	"RSA_print_fp"},
-{ERR_FUNC(RSA_F_RSA_SETUP_BLINDING),	"RSA_setup_blinding"},
-{ERR_FUNC(RSA_F_RSA_SIGN),	"RSA_sign"},
-{ERR_FUNC(RSA_F_RSA_SIGN_ASN1_OCTET_STRING),	"RSA_sign_ASN1_OCTET_STRING"},
-{ERR_FUNC(RSA_F_RSA_VERIFY),	"RSA_verify"},
-{ERR_FUNC(RSA_F_RSA_VERIFY_ASN1_OCTET_STRING),	"RSA_verify_ASN1_OCTET_STRING"},
-{ERR_FUNC(RSA_F_RSA_VERIFY_PKCS1_PSS),	"RSA_verify_PKCS1_PSS"},
-{0,NULL}
-	};
-
-static ERR_STRING_DATA RSA_str_reasons[]=
-	{
-{ERR_REASON(RSA_R_ALGORITHM_MISMATCH)    ,"algorithm mismatch"},
-{ERR_REASON(RSA_R_BAD_E_VALUE)           ,"bad e value"},
-{ERR_REASON(RSA_R_BAD_FIXED_HEADER_DECRYPT),"bad fixed header decrypt"},
-{ERR_REASON(RSA_R_BAD_PAD_BYTE_COUNT)    ,"bad pad byte count"},
-{ERR_REASON(RSA_R_BAD_SIGNATURE)         ,"bad signature"},
-{ERR_REASON(RSA_R_BLOCK_TYPE_IS_NOT_01)  ,"block type is not 01"},
-{ERR_REASON(RSA_R_BLOCK_TYPE_IS_NOT_02)  ,"block type is not 02"},
-{ERR_REASON(RSA_R_DATA_GREATER_THAN_MOD_LEN),"data greater than mod len"},
-{ERR_REASON(RSA_R_DATA_TOO_LARGE)        ,"data too large"},
-{ERR_REASON(RSA_R_DATA_TOO_LARGE_FOR_KEY_SIZE),"data too large for key size"},
-{ERR_REASON(RSA_R_DATA_TOO_LARGE_FOR_MODULUS),"data too large for modulus"},
-{ERR_REASON(RSA_R_DATA_TOO_SMALL)        ,"data too small"},
-{ERR_REASON(RSA_R_DATA_TOO_SMALL_FOR_KEY_SIZE),"data too small for key size"},
-{ERR_REASON(RSA_R_DIGEST_TOO_BIG_FOR_RSA_KEY),"digest too big for rsa key"},
-{ERR_REASON(RSA_R_DMP1_NOT_CONGRUENT_TO_D),"dmp1 not congruent to d"},
-{ERR_REASON(RSA_R_DMQ1_NOT_CONGRUENT_TO_D),"dmq1 not congruent to d"},
-{ERR_REASON(RSA_R_D_E_NOT_CONGRUENT_TO_1),"d e not congruent to 1"},
-{ERR_REASON(RSA_R_FIRST_OCTET_INVALID)   ,"first octet invalid"},
-{ERR_REASON(RSA_R_INVALID_HEADER)        ,"invalid header"},
-{ERR_REASON(RSA_R_INVALID_MESSAGE_LENGTH),"invalid message length"},
-{ERR_REASON(RSA_R_INVALID_PADDING)       ,"invalid padding"},
-{ERR_REASON(RSA_R_INVALID_TRAILER)       ,"invalid trailer"},
-{ERR_REASON(RSA_R_IQMP_NOT_INVERSE_OF_Q) ,"iqmp not inverse of q"},
-{ERR_REASON(RSA_R_KEY_SIZE_TOO_SMALL)    ,"key size too small"},
-{ERR_REASON(RSA_R_LAST_OCTET_INVALID)    ,"last octet invalid"},
-{ERR_REASON(RSA_R_MODULUS_TOO_LARGE)     ,"modulus too large"},
-{ERR_REASON(RSA_R_NO_PUBLIC_EXPONENT)    ,"no public exponent"},
-{ERR_REASON(RSA_R_NULL_BEFORE_BLOCK_MISSING),"null before block missing"},
-{ERR_REASON(RSA_R_N_DOES_NOT_EQUAL_P_Q)  ,"n does not equal p q"},
-{ERR_REASON(RSA_R_OAEP_DECODING_ERROR)   ,"oaep decoding error"},
-{ERR_REASON(RSA_R_PADDING_CHECK_FAILED)  ,"padding check failed"},
-{ERR_REASON(RSA_R_P_NOT_PRIME)           ,"p not prime"},
-{ERR_REASON(RSA_R_Q_NOT_PRIME)           ,"q not prime"},
-{ERR_REASON(RSA_R_RSA_OPERATIONS_NOT_SUPPORTED),"rsa operations not supported"},
-{ERR_REASON(RSA_R_SLEN_CHECK_FAILED)     ,"salt length check failed"},
-{ERR_REASON(RSA_R_SLEN_RECOVERY_FAILED)  ,"salt length recovery failed"},
-{ERR_REASON(RSA_R_SSLV3_ROLLBACK_ATTACK) ,"sslv3 rollback attack"},
-{ERR_REASON(RSA_R_THE_ASN1_OBJECT_IDENTIFIER_IS_NOT_KNOWN_FOR_THIS_MD),"the asn1 object identifier is not known for this md"},
-{ERR_REASON(RSA_R_UNKNOWN_ALGORITHM_TYPE),"unknown algorithm type"},
-{ERR_REASON(RSA_R_UNKNOWN_PADDING_TYPE)  ,"unknown padding type"},
-{ERR_REASON(RSA_R_WRONG_SIGNATURE_LENGTH),"wrong signature length"},
-{0,NULL}
-	};
-
-#endif
-
-void ERR_load_RSA_strings(void)
-	{
-#ifndef OPENSSL_NO_ERR
-
-	if (ERR_func_error_string(RSA_str_functs[0].error) == NULL)
-		{
-		ERR_load_strings(0,RSA_str_functs);
-		ERR_load_strings(0,RSA_str_reasons);
-		}
-#endif
-	}
diff --git a/crypto/openssl/crypto/rsa/rsa_gen.c b/crypto/openssl/crypto/rsa/rsa_gen.c
deleted file mode 100644
index 742f8b18e5ad..000000000000
--- a/crypto/openssl/crypto/rsa/rsa_gen.c
+++ /dev/null
@@ -1,194 +0,0 @@
-/* crypto/rsa/rsa_gen.c */
-/* Copyright (C) 1995-1998 Eric Young (eay@cryptsoft.com)
- * All rights reserved.
- *
- * This package is an SSL implementation written
- * by Eric Young (eay@cryptsoft.com).
- * The implementation was written so as to conform with Netscapes SSL.
- * 
- * This library is free for commercial and non-commercial use as long as
- * the following conditions are aheared to.  The following conditions
- * apply to all code found in this distribution, be it the RC4, RSA,
- * lhash, DES, etc., code; not just the SSL code.  The SSL documentation
- * included with this distribution is covered by the same copyright terms
- * except that the holder is Tim Hudson (tjh@cryptsoft.com).
- * 
- * Copyright remains Eric Young's, and as such any Copyright notices in
- * the code are not to be removed.
- * If this package is used in a product, Eric Young should be given attribution
- * as the author of the parts of the library used.
- * This can be in the form of a textual message at program startup or
- * in documentation (online or textual) provided with the package.
- * 
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions
- * are met:
- * 1. Redistributions of source code must retain the copyright
- *    notice, this list of conditions and the following disclaimer.
- * 2. Redistributions in binary form must reproduce the above copyright
- *    notice, this list of conditions and the following disclaimer in the
- *    documentation and/or other materials provided with the distribution.
- * 3. All advertising materials mentioning features or use of this software
- *    must display the following acknowledgement:
- *    "This product includes cryptographic software written by
- *     Eric Young (eay@cryptsoft.com)"
- *    The word 'cryptographic' can be left out if the rouines from the library
- *    being used are not cryptographic related :-).
- * 4. If you include any Windows specific code (or a derivative thereof) from 
- *    the apps directory (application code) you must include an acknowledgement:
- *    "This product includes software written by Tim Hudson (tjh@cryptsoft.com)"
- * 
- * THIS SOFTWARE IS PROVIDED BY ERIC YOUNG ``AS IS'' AND
- * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
- * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
- * ARE DISCLAIMED.  IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE
- * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
- * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
- * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
- * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
- * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
- * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
- * SUCH DAMAGE.
- * 
- * The licence and distribution terms for any publically available version or
- * derivative of this code cannot be changed.  i.e. this code cannot simply be
- * copied and put under another distribution licence
- * [including the GNU Public Licence.]
- */
-
-
-/* NB: these functions have been "upgraded", the deprecated versions (which are
- * compatibility wrappers using these functions) are in rsa_depr.c.
- * - Geoff
- */
-
-#include <stdio.h>
-#include <time.h>
-#include "cryptlib.h"
-#include <openssl/bn.h>
-#include <openssl/rsa.h>
-
-static int rsa_builtin_keygen(RSA *rsa, int bits, BIGNUM *e_value, BN_GENCB *cb);
-
-/* NB: this wrapper would normally be placed in rsa_lib.c and the static
- * implementation would probably be in rsa_eay.c. Nonetheless, is kept here so
- * that we don't introduce a new linker dependency. Eg. any application that
- * wasn't previously linking object code related to key-generation won't have to
- * now just because key-generation is part of RSA_METHOD. */
-int RSA_generate_key_ex(RSA *rsa, int bits, BIGNUM *e_value, BN_GENCB *cb)
-	{
-	if(rsa->meth->rsa_keygen)
-		return rsa->meth->rsa_keygen(rsa, bits, e_value, cb);
-	return rsa_builtin_keygen(rsa, bits, e_value, cb);
-	}
-
-static int rsa_builtin_keygen(RSA *rsa, int bits, BIGNUM *e_value, BN_GENCB *cb)
-	{
-	BIGNUM *r0=NULL,*r1=NULL,*r2=NULL,*r3=NULL,*tmp;
-	int bitsp,bitsq,ok= -1,n=0;
-	BN_CTX *ctx=NULL;
-
-	ctx=BN_CTX_new();
-	if (ctx == NULL) goto err;
-	BN_CTX_start(ctx);
-	r0 = BN_CTX_get(ctx);
-	r1 = BN_CTX_get(ctx);
-	r2 = BN_CTX_get(ctx);
-	r3 = BN_CTX_get(ctx);
-	if (r3 == NULL) goto err;
-
-	bitsp=(bits+1)/2;
-	bitsq=bits-bitsp;
-
-	/* We need the RSA components non-NULL */
-	if(!rsa->n && ((rsa->n=BN_new()) == NULL)) goto err;
-	if(!rsa->d && ((rsa->d=BN_new()) == NULL)) goto err;
-	if(!rsa->e && ((rsa->e=BN_new()) == NULL)) goto err;
-	if(!rsa->p && ((rsa->p=BN_new()) == NULL)) goto err;
-	if(!rsa->q && ((rsa->q=BN_new()) == NULL)) goto err;
-	if(!rsa->dmp1 && ((rsa->dmp1=BN_new()) == NULL)) goto err;
-	if(!rsa->dmq1 && ((rsa->dmq1=BN_new()) == NULL)) goto err;
-	if(!rsa->iqmp && ((rsa->iqmp=BN_new()) == NULL)) goto err;
-
-	BN_copy(rsa->e, e_value);
-
-	/* generate p and q */
-	for (;;)
-		{
-		if(!BN_generate_prime_ex(rsa->p, bitsp, 0, NULL, NULL, cb))
-			goto err;
-		if (!BN_sub(r2,rsa->p,BN_value_one())) goto err;
-		if (!BN_gcd(r1,r2,rsa->e,ctx)) goto err;
-		if (BN_is_one(r1)) break;
-		if(!BN_GENCB_call(cb, 2, n++))
-			goto err;
-		}
-	if(!BN_GENCB_call(cb, 3, 0))
-		goto err;
-	for (;;)
-		{
-		/* When generating ridiculously small keys, we can get stuck
-		 * continually regenerating the same prime values. Check for
-		 * this and bail if it happens 3 times. */
-		unsigned int degenerate = 0;
-		do
-			{
-			if(!BN_generate_prime_ex(rsa->q, bitsq, 0, NULL, NULL, cb))
-				goto err;
-			} while((BN_cmp(rsa->p, rsa->q) == 0) && (++degenerate < 3));
-		if(degenerate == 3)
-			{
-			ok = 0; /* we set our own err */
-			RSAerr(RSA_F_RSA_BUILTIN_KEYGEN,RSA_R_KEY_SIZE_TOO_SMALL);
-			goto err;
-			}
-		if (!BN_sub(r2,rsa->q,BN_value_one())) goto err;
-		if (!BN_gcd(r1,r2,rsa->e,ctx)) goto err;
-		if (BN_is_one(r1))
-			break;
-		if(!BN_GENCB_call(cb, 2, n++))
-			goto err;
-		}
-	if(!BN_GENCB_call(cb, 3, 1))
-		goto err;
-	if (BN_cmp(rsa->p,rsa->q) < 0)
-		{
-		tmp=rsa->p;
-		rsa->p=rsa->q;
-		rsa->q=tmp;
-		}
-
-	/* calculate n */
-	if (!BN_mul(rsa->n,rsa->p,rsa->q,ctx)) goto err;
-
-	/* calculate d */
-	if (!BN_sub(r1,rsa->p,BN_value_one())) goto err;	/* p-1 */
-	if (!BN_sub(r2,rsa->q,BN_value_one())) goto err;	/* q-1 */
-	if (!BN_mul(r0,r1,r2,ctx)) goto err;	/* (p-1)(q-1) */
-	if (!BN_mod_inverse(rsa->d,rsa->e,r0,ctx)) goto err;	/* d */
-
-	/* calculate d mod (p-1) */
-	if (!BN_mod(rsa->dmp1,rsa->d,r1,ctx)) goto err;
-
-	/* calculate d mod (q-1) */
-	if (!BN_mod(rsa->dmq1,rsa->d,r2,ctx)) goto err;
-
-	/* calculate inverse of q mod p */
-	if (!BN_mod_inverse(rsa->iqmp,rsa->q,rsa->p,ctx)) goto err;
-
-	ok=1;
-err:
-	if (ok == -1)
-		{
-		RSAerr(RSA_F_RSA_BUILTIN_KEYGEN,ERR_LIB_BN);
-		ok=0;
-		}
-	if (ctx != NULL)
-		{
-		BN_CTX_end(ctx);
-		BN_CTX_free(ctx);
-		}
-
-	return ok;
-	}
-
diff --git a/crypto/openssl/crypto/rsa/rsa_lib.c b/crypto/openssl/crypto/rsa/rsa_lib.c
deleted file mode 100644
index cca32c098df8..000000000000
--- a/crypto/openssl/crypto/rsa/rsa_lib.c
+++ /dev/null
@@ -1,464 +0,0 @@
-/* crypto/rsa/rsa_lib.c */
-/* Copyright (C) 1995-1998 Eric Young (eay@cryptsoft.com)
- * All rights reserved.
- *
- * This package is an SSL implementation written
- * by Eric Young (eay@cryptsoft.com).
- * The implementation was written so as to conform with Netscapes SSL.
- * 
- * This library is free for commercial and non-commercial use as long as
- * the following conditions are aheared to.  The following conditions
- * apply to all code found in this distribution, be it the RC4, RSA,
- * lhash, DES, etc., code; not just the SSL code.  The SSL documentation
- * included with this distribution is covered by the same copyright terms
- * except that the holder is Tim Hudson (tjh@cryptsoft.com).
- * 
- * Copyright remains Eric Young's, and as such any Copyright notices in
- * the code are not to be removed.
- * If this package is used in a product, Eric Young should be given attribution
- * as the author of the parts of the library used.
- * This can be in the form of a textual message at program startup or
- * in documentation (online or textual) provided with the package.
- * 
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions
- * are met:
- * 1. Redistributions of source code must retain the copyright
- *    notice, this list of conditions and the following disclaimer.
- * 2. Redistributions in binary form must reproduce the above copyright
- *    notice, this list of conditions and the following disclaimer in the
- *    documentation and/or other materials provided with the distribution.
- * 3. All advertising materials mentioning features or use of this software
- *    must display the following acknowledgement:
- *    "This product includes cryptographic software written by
- *     Eric Young (eay@cryptsoft.com)"
- *    The word 'cryptographic' can be left out if the rouines from the library
- *    being used are not cryptographic related :-).
- * 4. If you include any Windows specific code (or a derivative thereof) from 
- *    the apps directory (application code) you must include an acknowledgement:
- *    "This product includes software written by Tim Hudson (tjh@cryptsoft.com)"
- * 
- * THIS SOFTWARE IS PROVIDED BY ERIC YOUNG ``AS IS'' AND
- * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
- * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
- * ARE DISCLAIMED.  IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE
- * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
- * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
- * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
- * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
- * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
- * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
- * SUCH DAMAGE.
- * 
- * The licence and distribution terms for any publically available version or
- * derivative of this code cannot be changed.  i.e. this code cannot simply be
- * copied and put under another distribution licence
- * [including the GNU Public Licence.]
- */
-
-#include <stdio.h>
-#include <openssl/crypto.h>
-#include "cryptlib.h"
-#include <openssl/lhash.h>
-#include <openssl/bn.h>
-#include <openssl/rsa.h>
-#include <openssl/rand.h>
-#ifndef OPENSSL_NO_ENGINE
-#include <openssl/engine.h>
-#endif
-
-const char RSA_version[]="RSA" OPENSSL_VERSION_PTEXT;
-
-static const RSA_METHOD *default_RSA_meth=NULL;
-
-RSA *RSA_new(void)
-	{
-	RSA *r=RSA_new_method(NULL);
-
-	return r;
-	}
-
-void RSA_set_default_method(const RSA_METHOD *meth)
-	{
-	default_RSA_meth = meth;
-	}
-
-const RSA_METHOD *RSA_get_default_method(void)
-	{
-	if (default_RSA_meth == NULL)
-		{
-#ifdef RSA_NULL
-		default_RSA_meth=RSA_null_method();
-#else
-#if 0 /* was: #ifdef RSAref */
-		default_RSA_meth=RSA_PKCS1_RSAref();
-#else
-		default_RSA_meth=RSA_PKCS1_SSLeay();
-#endif
-#endif
-		}
-
-	return default_RSA_meth;
-	}
-
-const RSA_METHOD *RSA_get_method(const RSA *rsa)
-	{
-	return rsa->meth;
-	}
-
-int RSA_set_method(RSA *rsa, const RSA_METHOD *meth)
-	{
-	/* NB: The caller is specifically setting a method, so it's not up to us
-	 * to deal with which ENGINE it comes from. */
-	const RSA_METHOD *mtmp;
-	mtmp = rsa->meth;
-	if (mtmp->finish) mtmp->finish(rsa);
-#ifndef OPENSSL_NO_ENGINE
-	if (rsa->engine)
-		{
-		ENGINE_finish(rsa->engine);
-		rsa->engine = NULL;
-		}
-#endif
-	rsa->meth = meth;
-	if (meth->init) meth->init(rsa);
-	return 1;
-	}
-
-RSA *RSA_new_method(ENGINE *engine)
-	{
-	RSA *ret;
-
-	ret=(RSA *)OPENSSL_malloc(sizeof(RSA));
-	if (ret == NULL)
-		{
-		RSAerr(RSA_F_RSA_NEW_METHOD,ERR_R_MALLOC_FAILURE);
-		return NULL;
-		}
-
-	ret->meth = RSA_get_default_method();
-#ifndef OPENSSL_NO_ENGINE
-	if (engine)
-		{
-		if (!ENGINE_init(engine))
-			{
-			RSAerr(RSA_F_RSA_NEW_METHOD, ERR_R_ENGINE_LIB);
-			OPENSSL_free(ret);
-			return NULL;
-			}
-		ret->engine = engine;
-		}
-	else
-		ret->engine = ENGINE_get_default_RSA();
-	if(ret->engine)
-		{
-		ret->meth = ENGINE_get_RSA(ret->engine);
-		if(!ret->meth)
-			{
-			RSAerr(RSA_F_RSA_NEW_METHOD,
-				ERR_R_ENGINE_LIB);
-			ENGINE_finish(ret->engine);
-			OPENSSL_free(ret);
-			return NULL;
-			}
-		}
-#endif
-
-	ret->pad=0;
-	ret->version=0;
-	ret->n=NULL;
-	ret->e=NULL;
-	ret->d=NULL;
-	ret->p=NULL;
-	ret->q=NULL;
-	ret->dmp1=NULL;
-	ret->dmq1=NULL;
-	ret->iqmp=NULL;
-	ret->references=1;
-	ret->_method_mod_n=NULL;
-	ret->_method_mod_p=NULL;
-	ret->_method_mod_q=NULL;
-	ret->blinding=NULL;
-	ret->mt_blinding=NULL;
-	ret->bignum_data=NULL;
-	ret->flags=ret->meth->flags;
-	CRYPTO_new_ex_data(CRYPTO_EX_INDEX_RSA, ret, &ret->ex_data);
-	if ((ret->meth->init != NULL) && !ret->meth->init(ret))
-		{
-#ifndef OPENSSL_NO_ENGINE
-		if (ret->engine)
-			ENGINE_finish(ret->engine);
-#endif
-		CRYPTO_free_ex_data(CRYPTO_EX_INDEX_RSA, ret, &ret->ex_data);
-		OPENSSL_free(ret);
-		ret=NULL;
-		}
-	return(ret);
-	}
-
-void RSA_free(RSA *r)
-	{
-	int i;
-
-	if (r == NULL) return;
-
-	i=CRYPTO_add(&r->references,-1,CRYPTO_LOCK_RSA);
-#ifdef REF_PRINT
-	REF_PRINT("RSA",r);
-#endif
-	if (i > 0) return;
-#ifdef REF_CHECK
-	if (i < 0)
-		{
-		fprintf(stderr,"RSA_free, bad reference count\n");
-		abort();
-		}
-#endif
-
-	if (r->meth->finish)
-		r->meth->finish(r);
-#ifndef OPENSSL_NO_ENGINE
-	if (r->engine)
-		ENGINE_finish(r->engine);
-#endif
-
-	CRYPTO_free_ex_data(CRYPTO_EX_INDEX_RSA, r, &r->ex_data);
-
-	if (r->n != NULL) BN_clear_free(r->n);
-	if (r->e != NULL) BN_clear_free(r->e);
-	if (r->d != NULL) BN_clear_free(r->d);
-	if (r->p != NULL) BN_clear_free(r->p);
-	if (r->q != NULL) BN_clear_free(r->q);
-	if (r->dmp1 != NULL) BN_clear_free(r->dmp1);
-	if (r->dmq1 != NULL) BN_clear_free(r->dmq1);
-	if (r->iqmp != NULL) BN_clear_free(r->iqmp);
-	if (r->blinding != NULL) BN_BLINDING_free(r->blinding);
-	if (r->mt_blinding != NULL) BN_BLINDING_free(r->mt_blinding);
-	if (r->bignum_data != NULL) OPENSSL_free_locked(r->bignum_data);
-	OPENSSL_free(r);
-	}
-
-int RSA_up_ref(RSA *r)
-	{
-	int i = CRYPTO_add(&r->references, 1, CRYPTO_LOCK_RSA);
-#ifdef REF_PRINT
-	REF_PRINT("RSA",r);
-#endif
-#ifdef REF_CHECK
-	if (i < 2)
-		{
-		fprintf(stderr, "RSA_up_ref, bad reference count\n");
-		abort();
-		}
-#endif
-	return ((i > 1) ? 1 : 0);
-	}
-
-int RSA_get_ex_new_index(long argl, void *argp, CRYPTO_EX_new *new_func,
-	     CRYPTO_EX_dup *dup_func, CRYPTO_EX_free *free_func)
-        {
-	return CRYPTO_get_ex_new_index(CRYPTO_EX_INDEX_RSA, argl, argp,
-				new_func, dup_func, free_func);
-        }
-
-int RSA_set_ex_data(RSA *r, int idx, void *arg)
-	{
-	return(CRYPTO_set_ex_data(&r->ex_data,idx,arg));
-	}
-
-void *RSA_get_ex_data(const RSA *r, int idx)
-	{
-	return(CRYPTO_get_ex_data(&r->ex_data,idx));
-	}
-
-int RSA_size(const RSA *r)
-	{
-	return(BN_num_bytes(r->n));
-	}
-
-int RSA_public_encrypt(int flen, const unsigned char *from, unsigned char *to,
-	     RSA *rsa, int padding)
-	{
-	return(rsa->meth->rsa_pub_enc(flen, from, to, rsa, padding));
-	}
-
-int RSA_private_encrypt(int flen, const unsigned char *from, unsigned char *to,
-	     RSA *rsa, int padding)
-	{
-	return(rsa->meth->rsa_priv_enc(flen, from, to, rsa, padding));
-	}
-
-int RSA_private_decrypt(int flen, const unsigned char *from, unsigned char *to,
-	     RSA *rsa, int padding)
-	{
-	return(rsa->meth->rsa_priv_dec(flen, from, to, rsa, padding));
-	}
-
-int RSA_public_decrypt(int flen, const unsigned char *from, unsigned char *to,
-	     RSA *rsa, int padding)
-	{
-	return(rsa->meth->rsa_pub_dec(flen, from, to, rsa, padding));
-	}
-
-int RSA_flags(const RSA *r)
-	{
-	return((r == NULL)?0:r->meth->flags);
-	}
-
-void RSA_blinding_off(RSA *rsa)
-	{
-	if (rsa->blinding != NULL)
-		{
-		BN_BLINDING_free(rsa->blinding);
-		rsa->blinding=NULL;
-		}
-	rsa->flags &= ~RSA_FLAG_BLINDING;
-	rsa->flags |= RSA_FLAG_NO_BLINDING;
-	}
-
-int RSA_blinding_on(RSA *rsa, BN_CTX *ctx)
-	{
-	int ret=0;
-
-	if (rsa->blinding != NULL)
-		RSA_blinding_off(rsa);
-
-	rsa->blinding = RSA_setup_blinding(rsa, ctx);
-	if (rsa->blinding == NULL)
-		goto err;
-
-	rsa->flags |= RSA_FLAG_BLINDING;
-	rsa->flags &= ~RSA_FLAG_NO_BLINDING;
-	ret=1;
-err:
-	return(ret);
-	}
-
-static BIGNUM *rsa_get_public_exp(const BIGNUM *d, const BIGNUM *p,
-	const BIGNUM *q, BN_CTX *ctx)
-{
-	BIGNUM *ret = NULL, *r0, *r1, *r2;
-
-	if (d == NULL || p == NULL || q == NULL)
-		return NULL;
-
-	BN_CTX_start(ctx);
-	r0 = BN_CTX_get(ctx);
-	r1 = BN_CTX_get(ctx);
-	r2 = BN_CTX_get(ctx);
-	if (r2 == NULL)
-		goto err;
-
-	if (!BN_sub(r1, p, BN_value_one())) goto err;
-	if (!BN_sub(r2, q, BN_value_one())) goto err;
-	if (!BN_mul(r0, r1, r2, ctx)) goto err;
-
-	ret = BN_mod_inverse(NULL, d, r0, ctx);
-err:
-	BN_CTX_end(ctx);
-	return ret;
-}
-
-BN_BLINDING *RSA_setup_blinding(RSA *rsa, BN_CTX *in_ctx)
-{
-	BIGNUM *e;
-	BN_CTX *ctx;
-	BN_BLINDING *ret = NULL;
-
-	if (in_ctx == NULL)
-		{
-		if ((ctx = BN_CTX_new()) == NULL) return 0;
-		}
-	else
-		ctx = in_ctx;
-
-	BN_CTX_start(ctx);
-	e  = BN_CTX_get(ctx);
-	if (e == NULL)
-		{
-		RSAerr(RSA_F_RSA_SETUP_BLINDING, ERR_R_MALLOC_FAILURE);
-		goto err;
-		}
-
-	if (rsa->e == NULL)
-		{
-		e = rsa_get_public_exp(rsa->d, rsa->p, rsa->q, ctx);
-		if (e == NULL)
-			{
-			RSAerr(RSA_F_RSA_SETUP_BLINDING, RSA_R_NO_PUBLIC_EXPONENT);
-			goto err;
-			}
-		}
-	else
-		e = rsa->e;
-
-	
-	if ((RAND_status() == 0) && rsa->d != NULL && rsa->d->d != NULL)
-		{
-		/* if PRNG is not properly seeded, resort to secret
-		 * exponent as unpredictable seed */
-		RAND_add(rsa->d->d, rsa->d->dmax * sizeof rsa->d->d[0], 0.0);
-		}
-
-	ret = BN_BLINDING_create_param(NULL, e, rsa->n, ctx,
-			rsa->meth->bn_mod_exp, rsa->_method_mod_n);
-	if (ret == NULL)
-		{
-		RSAerr(RSA_F_RSA_SETUP_BLINDING, ERR_R_BN_LIB);
-		goto err;
-		}
-	BN_BLINDING_set_thread_id(ret, CRYPTO_thread_id());
-err:
-	BN_CTX_end(ctx);
-	if (in_ctx == NULL)
-		BN_CTX_free(ctx);
-	if(rsa->e == NULL)
-		BN_free(e);
-
-	return ret;
-}
-
-int RSA_memory_lock(RSA *r)
-	{
-	int i,j,k,off;
-	char *p;
-	BIGNUM *bn,**t[6],*b;
-	BN_ULONG *ul;
-
-	if (r->d == NULL) return(1);
-	t[0]= &r->d;
-	t[1]= &r->p;
-	t[2]= &r->q;
-	t[3]= &r->dmp1;
-	t[4]= &r->dmq1;
-	t[5]= &r->iqmp;
-	k=sizeof(BIGNUM)*6;
-	off=k/sizeof(BN_ULONG)+1;
-	j=1;
-	for (i=0; i<6; i++)
-		j+= (*t[i])->top;
-	if ((p=OPENSSL_malloc_locked((off+j)*sizeof(BN_ULONG))) == NULL)
-		{
-		RSAerr(RSA_F_RSA_MEMORY_LOCK,ERR_R_MALLOC_FAILURE);
-		return(0);
-		}
-	bn=(BIGNUM *)p;
-	ul=(BN_ULONG *)&(p[off]);
-	for (i=0; i<6; i++)
-		{
-		b= *(t[i]);
-		*(t[i])= &(bn[i]);
-		memcpy((char *)&(bn[i]),(char *)b,sizeof(BIGNUM));
-		bn[i].flags=BN_FLG_STATIC_DATA;
-		bn[i].d=ul;
-		memcpy((char *)ul,b->d,sizeof(BN_ULONG)*b->top);
-		ul+=b->top;
-		BN_clear_free(b);
-		}
-	
-	/* I should fix this so it can still be done */
-	r->flags&= ~(RSA_FLAG_CACHE_PRIVATE|RSA_FLAG_CACHE_PUBLIC);
-
-	r->bignum_data=p;
-	return(1);
-	}
diff --git a/crypto/openssl/crypto/rsa/rsa_none.c b/crypto/openssl/crypto/rsa/rsa_none.c
deleted file mode 100644
index e6f3e627ca1a..000000000000
--- a/crypto/openssl/crypto/rsa/rsa_none.c
+++ /dev/null
@@ -1,98 +0,0 @@
-/* crypto/rsa/rsa_none.c */
-/* Copyright (C) 1995-1998 Eric Young (eay@cryptsoft.com)
- * All rights reserved.
- *
- * This package is an SSL implementation written
- * by Eric Young (eay@cryptsoft.com).
- * The implementation was written so as to conform with Netscapes SSL.
- * 
- * This library is free for commercial and non-commercial use as long as
- * the following conditions are aheared to.  The following conditions
- * apply to all code found in this distribution, be it the RC4, RSA,
- * lhash, DES, etc., code; not just the SSL code.  The SSL documentation
- * included with this distribution is covered by the same copyright terms
- * except that the holder is Tim Hudson (tjh@cryptsoft.com).
- * 
- * Copyright remains Eric Young's, and as such any Copyright notices in
- * the code are not to be removed.
- * If this package is used in a product, Eric Young should be given attribution
- * as the author of the parts of the library used.
- * This can be in the form of a textual message at program startup or
- * in documentation (online or textual) provided with the package.
- * 
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions
- * are met:
- * 1. Redistributions of source code must retain the copyright
- *    notice, this list of conditions and the following disclaimer.
- * 2. Redistributions in binary form must reproduce the above copyright
- *    notice, this list of conditions and the following disclaimer in the
- *    documentation and/or other materials provided with the distribution.
- * 3. All advertising materials mentioning features or use of this software
- *    must display the following acknowledgement:
- *    "This product includes cryptographic software written by
- *     Eric Young (eay@cryptsoft.com)"
- *    The word 'cryptographic' can be left out if the rouines from the library
- *    being used are not cryptographic related :-).
- * 4. If you include any Windows specific code (or a derivative thereof) from 
- *    the apps directory (application code) you must include an acknowledgement:
- *    "This product includes software written by Tim Hudson (tjh@cryptsoft.com)"
- * 
- * THIS SOFTWARE IS PROVIDED BY ERIC YOUNG ``AS IS'' AND
- * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
- * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
- * ARE DISCLAIMED.  IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE
- * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
- * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
- * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
- * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
- * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
- * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
- * SUCH DAMAGE.
- * 
- * The licence and distribution terms for any publically available version or
- * derivative of this code cannot be changed.  i.e. this code cannot simply be
- * copied and put under another distribution licence
- * [including the GNU Public Licence.]
- */
-
-#include <stdio.h>
-#include "cryptlib.h"
-#include <openssl/bn.h>
-#include <openssl/rsa.h>
-#include <openssl/rand.h>
-
-int RSA_padding_add_none(unsigned char *to, int tlen,
-	const unsigned char *from, int flen)
-	{
-	if (flen > tlen)
-		{
-		RSAerr(RSA_F_RSA_PADDING_ADD_NONE,RSA_R_DATA_TOO_LARGE_FOR_KEY_SIZE);
-		return(0);
-		}
-
-	if (flen < tlen)
-		{
-		RSAerr(RSA_F_RSA_PADDING_ADD_NONE,RSA_R_DATA_TOO_SMALL_FOR_KEY_SIZE);
-		return(0);
-		}
-	
-	memcpy(to,from,(unsigned int)flen);
-	return(1);
-	}
-
-int RSA_padding_check_none(unsigned char *to, int tlen,
-	const unsigned char *from, int flen, int num)
-	{
-
-	if (flen > tlen)
-		{
-		RSAerr(RSA_F_RSA_PADDING_CHECK_NONE,RSA_R_DATA_TOO_LARGE);
-		return(-1);
-		}
-
-	memset(to,0,tlen-flen);
-	memcpy(to+tlen-flen,from,flen);
-	return(tlen);
-	}
-
diff --git a/crypto/openssl/crypto/rsa/rsa_null.c b/crypto/openssl/crypto/rsa/rsa_null.c
deleted file mode 100644
index 491572c82bdc..000000000000
--- a/crypto/openssl/crypto/rsa/rsa_null.c
+++ /dev/null
@@ -1,151 +0,0 @@
-/* rsa_null.c */
-/* Written by Dr Stephen N Henson (shenson@bigfoot.com) for the OpenSSL
- * project 1999.
- */
-/* ====================================================================
- * Copyright (c) 1999 The OpenSSL Project.  All rights reserved.
- *
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions
- * are met:
- *
- * 1. Redistributions of source code must retain the above copyright
- *    notice, this list of conditions and the following disclaimer. 
- *
- * 2. Redistributions in binary form must reproduce the above copyright
- *    notice, this list of conditions and the following disclaimer in
- *    the documentation and/or other materials provided with the
- *    distribution.
- *
- * 3. All advertising materials mentioning features or use of this
- *    software must display the following acknowledgment:
- *    "This product includes software developed by the OpenSSL Project
- *    for use in the OpenSSL Toolkit. (http://www.OpenSSL.org/)"
- *
- * 4. The names "OpenSSL Toolkit" and "OpenSSL Project" must not be used to
- *    endorse or promote products derived from this software without
- *    prior written permission. For written permission, please contact
- *    licensing@OpenSSL.org.
- *
- * 5. Products derived from this software may not be called "OpenSSL"
- *    nor may "OpenSSL" appear in their names without prior written
- *    permission of the OpenSSL Project.
- *
- * 6. Redistributions of any form whatsoever must retain the following
- *    acknowledgment:
- *    "This product includes software developed by the OpenSSL Project
- *    for use in the OpenSSL Toolkit (http://www.OpenSSL.org/)"
- *
- * THIS SOFTWARE IS PROVIDED BY THE OpenSSL PROJECT ``AS IS'' AND ANY
- * EXPRESSED OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
- * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR
- * PURPOSE ARE DISCLAIMED.  IN NO EVENT SHALL THE OpenSSL PROJECT OR
- * ITS CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
- * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
- * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
- * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
- * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
- * STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
- * ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED
- * OF THE POSSIBILITY OF SUCH DAMAGE.
- * ====================================================================
- *
- * This product includes cryptographic software written by Eric Young
- * (eay@cryptsoft.com).  This product includes software written by Tim
- * Hudson (tjh@cryptsoft.com).
- *
- */
-
-#include <stdio.h>
-#include "cryptlib.h"
-#include <openssl/bn.h>
-#include <openssl/rsa.h>
-#include <openssl/rand.h>
-
-/* This is a dummy RSA implementation that just returns errors when called.
- * It is designed to allow some RSA functions to work while stopping those
- * covered by the RSA patent. That is RSA, encryption, decryption, signing
- * and verify is not allowed but RSA key generation, key checking and other
- * operations (like storing RSA keys) are permitted.
- */
-
-static int RSA_null_public_encrypt(int flen, const unsigned char *from,
-		unsigned char *to, RSA *rsa,int padding);
-static int RSA_null_private_encrypt(int flen, const unsigned char *from,
-		unsigned char *to, RSA *rsa,int padding);
-static int RSA_null_public_decrypt(int flen, const unsigned char *from,
-		unsigned char *to, RSA *rsa,int padding);
-static int RSA_null_private_decrypt(int flen, const unsigned char *from,
-		unsigned char *to, RSA *rsa,int padding);
-#if 0 /* not currently used */
-static int RSA_null_mod_exp(const BIGNUM *r0, const BIGNUM *i, RSA *rsa);
-#endif
-static int RSA_null_init(RSA *rsa);
-static int RSA_null_finish(RSA *rsa);
-static RSA_METHOD rsa_null_meth={
-	"Null RSA",
-	RSA_null_public_encrypt,
-	RSA_null_public_decrypt,
-	RSA_null_private_encrypt,
-	RSA_null_private_decrypt,
-	NULL,
-	NULL,
-	RSA_null_init,
-	RSA_null_finish,
-	0,
-	NULL,
-	NULL,
-	NULL,
-	NULL
-	};
-
-const RSA_METHOD *RSA_null_method(void)
-	{
-	return(&rsa_null_meth);
-	}
-
-static int RSA_null_public_encrypt(int flen, const unsigned char *from,
-	     unsigned char *to, RSA *rsa, int padding)
-	{
-	RSAerr(RSA_F_RSA_NULL_PUBLIC_ENCRYPT, RSA_R_RSA_OPERATIONS_NOT_SUPPORTED);
-	return -1;
-	}
-
-static int RSA_null_private_encrypt(int flen, const unsigned char *from,
-	     unsigned char *to, RSA *rsa, int padding)
-	{
-	RSAerr(RSA_F_RSA_NULL_PRIVATE_ENCRYPT, RSA_R_RSA_OPERATIONS_NOT_SUPPORTED);
-	return -1;
-	}
-
-static int RSA_null_private_decrypt(int flen, const unsigned char *from,
-	     unsigned char *to, RSA *rsa, int padding)
-	{
-	RSAerr(RSA_F_RSA_NULL_PRIVATE_DECRYPT, RSA_R_RSA_OPERATIONS_NOT_SUPPORTED);
-	return -1;
-	}
-
-static int RSA_null_public_decrypt(int flen, const unsigned char *from,
-	     unsigned char *to, RSA *rsa, int padding)
-	{
-	RSAerr(RSA_F_RSA_NULL_PUBLIC_DECRYPT, RSA_R_RSA_OPERATIONS_NOT_SUPPORTED);
-	return -1;
-	}
-
-#if 0 /* not currently used */
-static int RSA_null_mod_exp(BIGNUM *r0, BIGNUM *I, RSA *rsa)
-	{
-	...err(RSA_F_RSA_NULL_MOD_EXP, RSA_R_RSA_OPERATIONS_NOT_SUPPORTED);
-	return -1;
-	}
-#endif
-
-static int RSA_null_init(RSA *rsa)
-	{
-	return(1);
-	}
-
-static int RSA_null_finish(RSA *rsa)
-	{
-	return(1);
-	}
diff --git a/crypto/openssl/crypto/rsa/rsa_oaep.c b/crypto/openssl/crypto/rsa/rsa_oaep.c
deleted file mode 100644
index 45d6f6ef8a5e..000000000000
--- a/crypto/openssl/crypto/rsa/rsa_oaep.c
+++ /dev/null
@@ -1,213 +0,0 @@
-/* crypto/rsa/rsa_oaep.c */
-/* Written by Ulf Moeller. This software is distributed on an "AS IS"
-   basis, WITHOUT WARRANTY OF ANY KIND, either express or implied. */
-
-/* EME-OAEP as defined in RFC 2437 (PKCS #1 v2.0) */
-
-/* See Victor Shoup, "OAEP reconsidered," Nov. 2000,
- * <URL: http://www.shoup.net/papers/oaep.ps.Z>
- * for problems with the security proof for the
- * original OAEP scheme, which EME-OAEP is based on.
- * 
- * A new proof can be found in E. Fujisaki, T. Okamoto,
- * D. Pointcheval, J. Stern, "RSA-OEAP is Still Alive!",
- * Dec. 2000, <URL: http://eprint.iacr.org/2000/061/>.
- * The new proof has stronger requirements for the
- * underlying permutation: "partial-one-wayness" instead
- * of one-wayness.  For the RSA function, this is
- * an equivalent notion.
- */
-
-
-#if !defined(OPENSSL_NO_SHA) && !defined(OPENSSL_NO_SHA1)
-#include <stdio.h>
-#include "cryptlib.h"
-#include <openssl/bn.h>
-#include <openssl/rsa.h>
-#include <openssl/evp.h>
-#include <openssl/rand.h>
-#include <openssl/sha.h>
-
-int MGF1(unsigned char *mask, long len,
-	const unsigned char *seed, long seedlen);
-
-int RSA_padding_add_PKCS1_OAEP(unsigned char *to, int tlen,
-	const unsigned char *from, int flen,
-	const unsigned char *param, int plen)
-	{
-	int i, emlen = tlen - 1;
-	unsigned char *db, *seed;
-	unsigned char *dbmask, seedmask[SHA_DIGEST_LENGTH];
-
-	if (flen > emlen - 2 * SHA_DIGEST_LENGTH - 1)
-		{
-		RSAerr(RSA_F_RSA_PADDING_ADD_PKCS1_OAEP,
-		   RSA_R_DATA_TOO_LARGE_FOR_KEY_SIZE);
-		return 0;
-		}
-
-	if (emlen < 2 * SHA_DIGEST_LENGTH + 1)
-		{
-		RSAerr(RSA_F_RSA_PADDING_ADD_PKCS1_OAEP, RSA_R_KEY_SIZE_TOO_SMALL);
-		return 0;
-		}
-
-	dbmask = OPENSSL_malloc(emlen - SHA_DIGEST_LENGTH);
-	if (dbmask == NULL)
-		{
-		RSAerr(RSA_F_RSA_PADDING_ADD_PKCS1_OAEP, ERR_R_MALLOC_FAILURE);
-		return 0;
-		}
-
-	to[0] = 0;
-	seed = to + 1;
-	db = to + SHA_DIGEST_LENGTH + 1;
-
-	EVP_Digest((void *)param, plen, db, NULL, EVP_sha1(), NULL);
-	memset(db + SHA_DIGEST_LENGTH, 0,
-		emlen - flen - 2 * SHA_DIGEST_LENGTH - 1);
-	db[emlen - flen - SHA_DIGEST_LENGTH - 1] = 0x01;
-	memcpy(db + emlen - flen - SHA_DIGEST_LENGTH, from, (unsigned int) flen);
-	if (RAND_bytes(seed, SHA_DIGEST_LENGTH) <= 0)
-		return 0;
-#ifdef PKCS_TESTVECT
-	memcpy(seed,
-	   "\xaa\xfd\x12\xf6\x59\xca\xe6\x34\x89\xb4\x79\xe5\x07\x6d\xde\xc2\xf0\x6c\xb5\x8f",
-	   20);
-#endif
-
-	MGF1(dbmask, emlen - SHA_DIGEST_LENGTH, seed, SHA_DIGEST_LENGTH);
-	for (i = 0; i < emlen - SHA_DIGEST_LENGTH; i++)
-		db[i] ^= dbmask[i];
-
-	MGF1(seedmask, SHA_DIGEST_LENGTH, db, emlen - SHA_DIGEST_LENGTH);
-	for (i = 0; i < SHA_DIGEST_LENGTH; i++)
-		seed[i] ^= seedmask[i];
-
-	OPENSSL_free(dbmask);
-	return 1;
-	}
-
-int RSA_padding_check_PKCS1_OAEP(unsigned char *to, int tlen,
-	const unsigned char *from, int flen, int num,
-	const unsigned char *param, int plen)
-	{
-	int i, dblen, mlen = -1;
-	const unsigned char *maskeddb;
-	int lzero;
-	unsigned char *db = NULL, seed[SHA_DIGEST_LENGTH], phash[SHA_DIGEST_LENGTH];
-	int bad = 0;
-
-	if (--num < 2 * SHA_DIGEST_LENGTH + 1)
-		/* 'num' is the length of the modulus, i.e. does not depend on the
-		 * particular ciphertext. */
-		goto decoding_err;
-
-	lzero = num - flen;
-	if (lzero < 0)
-		{
-		/* lzero == -1 */
-
-		/* signalling this error immediately after detection might allow
-		 * for side-channel attacks (e.g. timing if 'plen' is huge
-		 * -- cf. James H. Manger, "A Chosen Ciphertext Attack on RSA Optimal
-		 * Asymmetric Encryption Padding (OAEP) [...]", CRYPTO 2001),
-		 * so we use a 'bad' flag */
-		bad = 1;
-		lzero = 0;
-		}
-	maskeddb = from - lzero + SHA_DIGEST_LENGTH;
-
-	dblen = num - SHA_DIGEST_LENGTH;
-	db = OPENSSL_malloc(dblen);
-	if (db == NULL)
-		{
-		RSAerr(RSA_F_RSA_PADDING_CHECK_PKCS1_OAEP, ERR_R_MALLOC_FAILURE);
-		return -1;
-		}
-
-	MGF1(seed, SHA_DIGEST_LENGTH, maskeddb, dblen);
-	for (i = lzero; i < SHA_DIGEST_LENGTH; i++)
-		seed[i] ^= from[i - lzero];
-  
-	MGF1(db, dblen, seed, SHA_DIGEST_LENGTH);
-	for (i = 0; i < dblen; i++)
-		db[i] ^= maskeddb[i];
-
-	EVP_Digest((void *)param, plen, phash, NULL, EVP_sha1(), NULL);
-
-	if (memcmp(db, phash, SHA_DIGEST_LENGTH) != 0 || bad)
-		goto decoding_err;
-	else
-		{
-		for (i = SHA_DIGEST_LENGTH; i < dblen; i++)
-			if (db[i] != 0x00)
-				break;
-		if (db[i] != 0x01 || i++ >= dblen)
-			goto decoding_err;
-		else
-			{
-			/* everything looks OK */
-
-			mlen = dblen - i;
-			if (tlen < mlen)
-				{
-				RSAerr(RSA_F_RSA_PADDING_CHECK_PKCS1_OAEP, RSA_R_DATA_TOO_LARGE);
-				mlen = -1;
-				}
-			else
-				memcpy(to, db + i, mlen);
-			}
-		}
-	OPENSSL_free(db);
-	return mlen;
-
-decoding_err:
-	/* to avoid chosen ciphertext attacks, the error message should not reveal
-	 * which kind of decoding error happened */
-	RSAerr(RSA_F_RSA_PADDING_CHECK_PKCS1_OAEP, RSA_R_OAEP_DECODING_ERROR);
-	if (db != NULL) OPENSSL_free(db);
-	return -1;
-	}
-
-int PKCS1_MGF1(unsigned char *mask, long len,
-	const unsigned char *seed, long seedlen, const EVP_MD *dgst)
-	{
-	long i, outlen = 0;
-	unsigned char cnt[4];
-	EVP_MD_CTX c;
-	unsigned char md[EVP_MAX_MD_SIZE];
-	int mdlen;
-
-	EVP_MD_CTX_init(&c);
-	mdlen = EVP_MD_size(dgst);
-	for (i = 0; outlen < len; i++)
-		{
-		cnt[0] = (unsigned char)((i >> 24) & 255);
-		cnt[1] = (unsigned char)((i >> 16) & 255);
-		cnt[2] = (unsigned char)((i >> 8)) & 255;
-		cnt[3] = (unsigned char)(i & 255);
-		EVP_DigestInit_ex(&c,dgst, NULL);
-		EVP_DigestUpdate(&c, seed, seedlen);
-		EVP_DigestUpdate(&c, cnt, 4);
-		if (outlen + mdlen <= len)
-			{
-			EVP_DigestFinal_ex(&c, mask + outlen, NULL);
-			outlen += mdlen;
-			}
-		else
-			{
-			EVP_DigestFinal_ex(&c, md, NULL);
-			memcpy(mask + outlen, md, len - outlen);
-			outlen = len;
-			}
-		}
-	EVP_MD_CTX_cleanup(&c);
-	return 0;
-	}
-
-int MGF1(unsigned char *mask, long len, const unsigned char *seed, long seedlen)
-	{
-	return PKCS1_MGF1(mask, len, seed, seedlen, EVP_sha1());
-	}
-#endif
diff --git a/crypto/openssl/crypto/rsa/rsa_pk1.c b/crypto/openssl/crypto/rsa/rsa_pk1.c
deleted file mode 100644
index 8560755f1d12..000000000000
--- a/crypto/openssl/crypto/rsa/rsa_pk1.c
+++ /dev/null
@@ -1,224 +0,0 @@
-/* crypto/rsa/rsa_pk1.c */
-/* Copyright (C) 1995-1998 Eric Young (eay@cryptsoft.com)
- * All rights reserved.
- *
- * This package is an SSL implementation written
- * by Eric Young (eay@cryptsoft.com).
- * The implementation was written so as to conform with Netscapes SSL.
- * 
- * This library is free for commercial and non-commercial use as long as
- * the following conditions are aheared to.  The following conditions
- * apply to all code found in this distribution, be it the RC4, RSA,
- * lhash, DES, etc., code; not just the SSL code.  The SSL documentation
- * included with this distribution is covered by the same copyright terms
- * except that the holder is Tim Hudson (tjh@cryptsoft.com).
- * 
- * Copyright remains Eric Young's, and as such any Copyright notices in
- * the code are not to be removed.
- * If this package is used in a product, Eric Young should be given attribution
- * as the author of the parts of the library used.
- * This can be in the form of a textual message at program startup or
- * in documentation (online or textual) provided with the package.
- * 
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions
- * are met:
- * 1. Redistributions of source code must retain the copyright
- *    notice, this list of conditions and the following disclaimer.
- * 2. Redistributions in binary form must reproduce the above copyright
- *    notice, this list of conditions and the following disclaimer in the
- *    documentation and/or other materials provided with the distribution.
- * 3. All advertising materials mentioning features or use of this software
- *    must display the following acknowledgement:
- *    "This product includes cryptographic software written by
- *     Eric Young (eay@cryptsoft.com)"
- *    The word 'cryptographic' can be left out if the rouines from the library
- *    being used are not cryptographic related :-).
- * 4. If you include any Windows specific code (or a derivative thereof) from 
- *    the apps directory (application code) you must include an acknowledgement:
- *    "This product includes software written by Tim Hudson (tjh@cryptsoft.com)"
- * 
- * THIS SOFTWARE IS PROVIDED BY ERIC YOUNG ``AS IS'' AND
- * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
- * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
- * ARE DISCLAIMED.  IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE
- * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
- * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
- * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
- * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
- * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
- * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
- * SUCH DAMAGE.
- * 
- * The licence and distribution terms for any publically available version or
- * derivative of this code cannot be changed.  i.e. this code cannot simply be
- * copied and put under another distribution licence
- * [including the GNU Public Licence.]
- */
-
-#include <stdio.h>
-#include "cryptlib.h"
-#include <openssl/bn.h>
-#include <openssl/rsa.h>
-#include <openssl/rand.h>
-
-int RSA_padding_add_PKCS1_type_1(unsigned char *to, int tlen,
-	     const unsigned char *from, int flen)
-	{
-	int j;
-	unsigned char *p;
-
-	if (flen > (tlen-RSA_PKCS1_PADDING_SIZE))
-		{
-		RSAerr(RSA_F_RSA_PADDING_ADD_PKCS1_TYPE_1,RSA_R_DATA_TOO_LARGE_FOR_KEY_SIZE);
-		return(0);
-		}
-	
-	p=(unsigned char *)to;
-
-	*(p++)=0;
-	*(p++)=1; /* Private Key BT (Block Type) */
-
-	/* pad out with 0xff data */
-	j=tlen-3-flen;
-	memset(p,0xff,j);
-	p+=j;
-	*(p++)='\0';
-	memcpy(p,from,(unsigned int)flen);
-	return(1);
-	}
-
-int RSA_padding_check_PKCS1_type_1(unsigned char *to, int tlen,
-	     const unsigned char *from, int flen, int num)
-	{
-	int i,j;
-	const unsigned char *p;
-
-	p=from;
-	if ((num != (flen+1)) || (*(p++) != 01))
-		{
-		RSAerr(RSA_F_RSA_PADDING_CHECK_PKCS1_TYPE_1,RSA_R_BLOCK_TYPE_IS_NOT_01);
-		return(-1);
-		}
-
-	/* scan over padding data */
-	j=flen-1; /* one for type. */
-	for (i=0; i<j; i++)
-		{
-		if (*p != 0xff) /* should decrypt to 0xff */
-			{
-			if (*p == 0)
-				{ p++; break; }
-			else	{
-				RSAerr(RSA_F_RSA_PADDING_CHECK_PKCS1_TYPE_1,RSA_R_BAD_FIXED_HEADER_DECRYPT);
-				return(-1);
-				}
-			}
-		p++;
-		}
-
-	if (i == j)
-		{
-		RSAerr(RSA_F_RSA_PADDING_CHECK_PKCS1_TYPE_1,RSA_R_NULL_BEFORE_BLOCK_MISSING);
-		return(-1);
-		}
-
-	if (i < 8)
-		{
-		RSAerr(RSA_F_RSA_PADDING_CHECK_PKCS1_TYPE_1,RSA_R_BAD_PAD_BYTE_COUNT);
-		return(-1);
-		}
-	i++; /* Skip over the '\0' */
-	j-=i;
-	if (j > tlen)
-		{
-		RSAerr(RSA_F_RSA_PADDING_CHECK_PKCS1_TYPE_1,RSA_R_DATA_TOO_LARGE);
-		return(-1);
-		}
-	memcpy(to,p,(unsigned int)j);
-
-	return(j);
-	}
-
-int RSA_padding_add_PKCS1_type_2(unsigned char *to, int tlen,
-	     const unsigned char *from, int flen)
-	{
-	int i,j;
-	unsigned char *p;
-	
-	if (flen > (tlen-11))
-		{
-		RSAerr(RSA_F_RSA_PADDING_ADD_PKCS1_TYPE_2,RSA_R_DATA_TOO_LARGE_FOR_KEY_SIZE);
-		return(0);
-		}
-	
-	p=(unsigned char *)to;
-
-	*(p++)=0;
-	*(p++)=2; /* Public Key BT (Block Type) */
-
-	/* pad out with non-zero random data */
-	j=tlen-3-flen;
-
-	if (RAND_bytes(p,j) <= 0)
-		return(0);
-	for (i=0; i<j; i++)
-		{
-		if (*p == '\0')
-			do	{
-				if (RAND_bytes(p,1) <= 0)
-					return(0);
-				} while (*p == '\0');
-		p++;
-		}
-
-	*(p++)='\0';
-
-	memcpy(p,from,(unsigned int)flen);
-	return(1);
-	}
-
-int RSA_padding_check_PKCS1_type_2(unsigned char *to, int tlen,
-	     const unsigned char *from, int flen, int num)
-	{
-	int i,j;
-	const unsigned char *p;
-
-	p=from;
-	if ((num != (flen+1)) || (*(p++) != 02))
-		{
-		RSAerr(RSA_F_RSA_PADDING_CHECK_PKCS1_TYPE_2,RSA_R_BLOCK_TYPE_IS_NOT_02);
-		return(-1);
-		}
-#ifdef PKCS1_CHECK
-	return(num-11);
-#endif
-
-	/* scan over padding data */
-	j=flen-1; /* one for type. */
-	for (i=0; i<j; i++)
-		if (*(p++) == 0) break;
-
-	if (i == j)
-		{
-		RSAerr(RSA_F_RSA_PADDING_CHECK_PKCS1_TYPE_2,RSA_R_NULL_BEFORE_BLOCK_MISSING);
-		return(-1);
-		}
-
-	if (i < 8)
-		{
-		RSAerr(RSA_F_RSA_PADDING_CHECK_PKCS1_TYPE_2,RSA_R_BAD_PAD_BYTE_COUNT);
-		return(-1);
-		}
-	i++; /* Skip over the '\0' */
-	j-=i;
-	if (j > tlen)
-		{
-		RSAerr(RSA_F_RSA_PADDING_CHECK_PKCS1_TYPE_2,RSA_R_DATA_TOO_LARGE);
-		return(-1);
-		}
-	memcpy(to,p,(unsigned int)j);
-
-	return(j);
-	}
-
diff --git a/crypto/openssl/crypto/rsa/rsa_pss.c b/crypto/openssl/crypto/rsa/rsa_pss.c
deleted file mode 100644
index e19d18c5b937..000000000000
--- a/crypto/openssl/crypto/rsa/rsa_pss.c
+++ /dev/null
@@ -1,269 +0,0 @@
-/* rsa_pss.c */
-/* Written by Dr Stephen N Henson (shenson@bigfoot.com) for the OpenSSL
- * project 2005.
- */
-/* ====================================================================
- * Copyright (c) 2005 The OpenSSL Project.  All rights reserved.
- *
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions
- * are met:
- *
- * 1. Redistributions of source code must retain the above copyright
- *    notice, this list of conditions and the following disclaimer. 
- *
- * 2. Redistributions in binary form must reproduce the above copyright
- *    notice, this list of conditions and the following disclaimer in
- *    the documentation and/or other materials provided with the
- *    distribution.
- *
- * 3. All advertising materials mentioning features or use of this
- *    software must display the following acknowledgment:
- *    "This product includes software developed by the OpenSSL Project
- *    for use in the OpenSSL Toolkit. (http://www.OpenSSL.org/)"
- *
- * 4. The names "OpenSSL Toolkit" and "OpenSSL Project" must not be used to
- *    endorse or promote products derived from this software without
- *    prior written permission. For written permission, please contact
- *    licensing@OpenSSL.org.
- *
- * 5. Products derived from this software may not be called "OpenSSL"
- *    nor may "OpenSSL" appear in their names without prior written
- *    permission of the OpenSSL Project.
- *
- * 6. Redistributions of any form whatsoever must retain the following
- *    acknowledgment:
- *    "This product includes software developed by the OpenSSL Project
- *    for use in the OpenSSL Toolkit (http://www.OpenSSL.org/)"
- *
- * THIS SOFTWARE IS PROVIDED BY THE OpenSSL PROJECT ``AS IS'' AND ANY
- * EXPRESSED OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
- * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR
- * PURPOSE ARE DISCLAIMED.  IN NO EVENT SHALL THE OpenSSL PROJECT OR
- * ITS CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
- * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
- * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
- * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
- * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
- * STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
- * ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED
- * OF THE POSSIBILITY OF SUCH DAMAGE.
- * ====================================================================
- *
- * This product includes cryptographic software written by Eric Young
- * (eay@cryptsoft.com).  This product includes software written by Tim
- * Hudson (tjh@cryptsoft.com).
- *
- */
-
-#include <stdio.h>
-#include "cryptlib.h"
-#include <openssl/bn.h>
-#include <openssl/rsa.h>
-#include <openssl/evp.h>
-#include <openssl/rand.h>
-#include <openssl/sha.h>
-
-static const unsigned char zeroes[] = {0,0,0,0,0,0,0,0};
-
-#if defined(_MSC_VER) && defined(_ARM_)
-#pragma optimize("g", off)
-#endif
-
-int RSA_verify_PKCS1_PSS(RSA *rsa, const unsigned char *mHash,
-			const EVP_MD *Hash, const unsigned char *EM, int sLen)
-	{
-	int i;
-	int ret = 0;
-	int hLen, maskedDBLen, MSBits, emLen;
-	const unsigned char *H;
-	unsigned char *DB = NULL;
-	EVP_MD_CTX ctx;
-	unsigned char H_[EVP_MAX_MD_SIZE];
-
-	hLen = EVP_MD_size(Hash);
-	/*
-	 * Negative sLen has special meanings:
-	 *	-1	sLen == hLen
-	 *	-2	salt length is autorecovered from signature
-	 *	-N	reserved
-	 */
-	if      (sLen == -1)	sLen = hLen;
-	else if (sLen == -2)	sLen = -2;
-	else if (sLen < -2)
-		{
-		RSAerr(RSA_F_RSA_VERIFY_PKCS1_PSS, RSA_R_SLEN_CHECK_FAILED);
-		goto err;
-		}
-
-	MSBits = (BN_num_bits(rsa->n) - 1) & 0x7;
-	emLen = RSA_size(rsa);
-	if (EM[0] & (0xFF << MSBits))
-		{
-		RSAerr(RSA_F_RSA_VERIFY_PKCS1_PSS, RSA_R_FIRST_OCTET_INVALID);
-		goto err;
-		}
-	if (MSBits == 0)
-		{
-		EM++;
-		emLen--;
-		}
-	if (emLen < (hLen + sLen + 2)) /* sLen can be small negative */
-		{
-		RSAerr(RSA_F_RSA_VERIFY_PKCS1_PSS, RSA_R_DATA_TOO_LARGE);
-		goto err;
-		}
-	if (EM[emLen - 1] != 0xbc)
-		{
-		RSAerr(RSA_F_RSA_VERIFY_PKCS1_PSS, RSA_R_LAST_OCTET_INVALID);
-		goto err;
-		}
-	maskedDBLen = emLen - hLen - 1;
-	H = EM + maskedDBLen;
-	DB = OPENSSL_malloc(maskedDBLen);
-	if (!DB)
-		{
-		RSAerr(RSA_F_RSA_VERIFY_PKCS1_PSS, ERR_R_MALLOC_FAILURE);
-		goto err;
-		}
-	PKCS1_MGF1(DB, maskedDBLen, H, hLen, Hash);
-	for (i = 0; i < maskedDBLen; i++)
-		DB[i] ^= EM[i];
-	if (MSBits)
-		DB[0] &= 0xFF >> (8 - MSBits);
-	for (i = 0; DB[i] == 0 && i < (maskedDBLen-1); i++) ;
-	if (DB[i++] != 0x1)
-		{
-		RSAerr(RSA_F_RSA_VERIFY_PKCS1_PSS, RSA_R_SLEN_RECOVERY_FAILED);
-		goto err;
-		}
-	if (sLen >= 0 && (maskedDBLen - i) != sLen)
-		{
-		RSAerr(RSA_F_RSA_VERIFY_PKCS1_PSS, RSA_R_SLEN_CHECK_FAILED);
-		goto err;
-		}
-	EVP_MD_CTX_init(&ctx);
-	EVP_DigestInit_ex(&ctx, Hash, NULL);
-	EVP_DigestUpdate(&ctx, zeroes, sizeof zeroes);
-	EVP_DigestUpdate(&ctx, mHash, hLen);
-	if (maskedDBLen - i)
-		EVP_DigestUpdate(&ctx, DB + i, maskedDBLen - i);
-	EVP_DigestFinal(&ctx, H_, NULL);
-	EVP_MD_CTX_cleanup(&ctx);
-	if (memcmp(H_, H, hLen))
-		{
-		RSAerr(RSA_F_RSA_VERIFY_PKCS1_PSS, RSA_R_BAD_SIGNATURE);
-		ret = 0;
-		}
-	else 
-		ret = 1;
-
-	err:
-	if (DB)
-		OPENSSL_free(DB);
-
-	return ret;
-
-	}
-
-int RSA_padding_add_PKCS1_PSS(RSA *rsa, unsigned char *EM,
-			const unsigned char *mHash,
-			const EVP_MD *Hash, int sLen)
-	{
-	int i;
-	int ret = 0;
-	int hLen, maskedDBLen, MSBits, emLen;
-	unsigned char *H, *salt = NULL, *p;
-	EVP_MD_CTX ctx;
-
-	hLen = EVP_MD_size(Hash);
-	/*
-	 * Negative sLen has special meanings:
-	 *	-1	sLen == hLen
-	 *	-2	salt length is maximized
-	 *	-N	reserved
-	 */
-	if      (sLen == -1)	sLen = hLen;
-	else if (sLen == -2)	sLen = -2;
-	else if (sLen < -2)
-		{
-		RSAerr(RSA_F_RSA_PADDING_ADD_PKCS1_PSS, RSA_R_SLEN_CHECK_FAILED);
-		goto err;
-		}
-
-	MSBits = (BN_num_bits(rsa->n) - 1) & 0x7;
-	emLen = RSA_size(rsa);
-	if (MSBits == 0)
-		{
-		*EM++ = 0;
-		emLen--;
-		}
-	if (sLen == -2)
-		{
-		sLen = emLen - hLen - 2;
-		}
-	else if (emLen < (hLen + sLen + 2))
-		{
-		RSAerr(RSA_F_RSA_PADDING_ADD_PKCS1_PSS,
-		   RSA_R_DATA_TOO_LARGE_FOR_KEY_SIZE);
-		goto err;
-		}
-	if (sLen > 0)
-		{
-		salt = OPENSSL_malloc(sLen);
-		if (!salt)
-			{
-			RSAerr(RSA_F_RSA_PADDING_ADD_PKCS1_PSS,
-		   		ERR_R_MALLOC_FAILURE);
-			goto err;
-			}
-		if (!RAND_bytes(salt, sLen))
-			goto err;
-		}
-	maskedDBLen = emLen - hLen - 1;
-	H = EM + maskedDBLen;
-	EVP_MD_CTX_init(&ctx);
-	EVP_DigestInit_ex(&ctx, Hash, NULL);
-	EVP_DigestUpdate(&ctx, zeroes, sizeof zeroes);
-	EVP_DigestUpdate(&ctx, mHash, hLen);
-	if (sLen)
-		EVP_DigestUpdate(&ctx, salt, sLen);
-	EVP_DigestFinal(&ctx, H, NULL);
-	EVP_MD_CTX_cleanup(&ctx);
-
-	/* Generate dbMask in place then perform XOR on it */
-	PKCS1_MGF1(EM, maskedDBLen, H, hLen, Hash);
-
-	p = EM;
-
-	/* Initial PS XORs with all zeroes which is a NOP so just update
-	 * pointer. Note from a test above this value is guaranteed to
-	 * be non-negative.
-	 */
-	p += emLen - sLen - hLen - 2;
-	*p++ ^= 0x1;
-	if (sLen > 0)
-		{
-		for (i = 0; i < sLen; i++)
-			*p++ ^= salt[i];
-		}
-	if (MSBits)
-		EM[0] &= 0xFF >> (8 - MSBits);
-
-	/* H is already in place so just set final 0xbc */
-
-	EM[emLen - 1] = 0xbc;
-
-	ret = 1;
-
-	err:
-	if (salt)
-		OPENSSL_free(salt);
-
-	return ret;
-
-	}
-
-#if defined(_MSC_VER)
-#pragma optimize("",on)
-#endif
diff --git a/crypto/openssl/crypto/rsa/rsa_saos.c b/crypto/openssl/crypto/rsa/rsa_saos.c
deleted file mode 100644
index f98e0a80a6c2..000000000000
--- a/crypto/openssl/crypto/rsa/rsa_saos.c
+++ /dev/null
@@ -1,150 +0,0 @@
-/* crypto/rsa/rsa_saos.c */
-/* Copyright (C) 1995-1998 Eric Young (eay@cryptsoft.com)
- * All rights reserved.
- *
- * This package is an SSL implementation written
- * by Eric Young (eay@cryptsoft.com).
- * The implementation was written so as to conform with Netscapes SSL.
- * 
- * This library is free for commercial and non-commercial use as long as
- * the following conditions are aheared to.  The following conditions
- * apply to all code found in this distribution, be it the RC4, RSA,
- * lhash, DES, etc., code; not just the SSL code.  The SSL documentation
- * included with this distribution is covered by the same copyright terms
- * except that the holder is Tim Hudson (tjh@cryptsoft.com).
- * 
- * Copyright remains Eric Young's, and as such any Copyright notices in
- * the code are not to be removed.
- * If this package is used in a product, Eric Young should be given attribution
- * as the author of the parts of the library used.
- * This can be in the form of a textual message at program startup or
- * in documentation (online or textual) provided with the package.
- * 
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions
- * are met:
- * 1. Redistributions of source code must retain the copyright
- *    notice, this list of conditions and the following disclaimer.
- * 2. Redistributions in binary form must reproduce the above copyright
- *    notice, this list of conditions and the following disclaimer in the
- *    documentation and/or other materials provided with the distribution.
- * 3. All advertising materials mentioning features or use of this software
- *    must display the following acknowledgement:
- *    "This product includes cryptographic software written by
- *     Eric Young (eay@cryptsoft.com)"
- *    The word 'cryptographic' can be left out if the rouines from the library
- *    being used are not cryptographic related :-).
- * 4. If you include any Windows specific code (or a derivative thereof) from 
- *    the apps directory (application code) you must include an acknowledgement:
- *    "This product includes software written by Tim Hudson (tjh@cryptsoft.com)"
- * 
- * THIS SOFTWARE IS PROVIDED BY ERIC YOUNG ``AS IS'' AND
- * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
- * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
- * ARE DISCLAIMED.  IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE
- * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
- * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
- * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
- * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
- * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
- * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
- * SUCH DAMAGE.
- * 
- * The licence and distribution terms for any publically available version or
- * derivative of this code cannot be changed.  i.e. this code cannot simply be
- * copied and put under another distribution licence
- * [including the GNU Public Licence.]
- */
-
-#include <stdio.h>
-#include "cryptlib.h"
-#include <openssl/bn.h>
-#include <openssl/rsa.h>
-#include <openssl/objects.h>
-#include <openssl/x509.h>
-
-int RSA_sign_ASN1_OCTET_STRING(int type,
-	const unsigned char *m, unsigned int m_len,
-	unsigned char *sigret, unsigned int *siglen, RSA *rsa)
-	{
-	ASN1_OCTET_STRING sig;
-	int i,j,ret=1;
-	unsigned char *p,*s;
-
-	sig.type=V_ASN1_OCTET_STRING;
-	sig.length=m_len;
-	sig.data=(unsigned char *)m;
-
-	i=i2d_ASN1_OCTET_STRING(&sig,NULL);
-	j=RSA_size(rsa);
-	if (i > (j-RSA_PKCS1_PADDING_SIZE))
-		{
-		RSAerr(RSA_F_RSA_SIGN_ASN1_OCTET_STRING,RSA_R_DIGEST_TOO_BIG_FOR_RSA_KEY);
-		return(0);
-		}
-	s=(unsigned char *)OPENSSL_malloc((unsigned int)j+1);
-	if (s == NULL)
-		{
-		RSAerr(RSA_F_RSA_SIGN_ASN1_OCTET_STRING,ERR_R_MALLOC_FAILURE);
-		return(0);
-		}
-	p=s;
-	i2d_ASN1_OCTET_STRING(&sig,&p);
-	i=RSA_private_encrypt(i,s,sigret,rsa,RSA_PKCS1_PADDING);
-	if (i <= 0)
-		ret=0;
-	else
-		*siglen=i;
-
-	OPENSSL_cleanse(s,(unsigned int)j+1);
-	OPENSSL_free(s);
-	return(ret);
-	}
-
-int RSA_verify_ASN1_OCTET_STRING(int dtype,
-	const unsigned char *m,
-	unsigned int m_len, unsigned char *sigbuf, unsigned int siglen,
-	RSA *rsa)
-	{
-	int i,ret=0;
-	unsigned char *s;
-	const unsigned char *p;
-	ASN1_OCTET_STRING *sig=NULL;
-
-	if (siglen != (unsigned int)RSA_size(rsa))
-		{
-		RSAerr(RSA_F_RSA_VERIFY_ASN1_OCTET_STRING,RSA_R_WRONG_SIGNATURE_LENGTH);
-		return(0);
-		}
-
-	s=(unsigned char *)OPENSSL_malloc((unsigned int)siglen);
-	if (s == NULL)
-		{
-		RSAerr(RSA_F_RSA_VERIFY_ASN1_OCTET_STRING,ERR_R_MALLOC_FAILURE);
-		goto err;
-		}
-	i=RSA_public_decrypt((int)siglen,sigbuf,s,rsa,RSA_PKCS1_PADDING);
-
-	if (i <= 0) goto err;
-
-	p=s;
-	sig=d2i_ASN1_OCTET_STRING(NULL,&p,(long)i);
-	if (sig == NULL) goto err;
-
-	if (	((unsigned int)sig->length != m_len) ||
-		(memcmp(m,sig->data,m_len) != 0))
-		{
-		RSAerr(RSA_F_RSA_VERIFY_ASN1_OCTET_STRING,RSA_R_BAD_SIGNATURE);
-		}
-	else
-		ret=1;
-err:
-	if (sig != NULL) M_ASN1_OCTET_STRING_free(sig);
-	if (s != NULL)
-		{
-		OPENSSL_cleanse(s,(unsigned int)siglen);
-		OPENSSL_free(s);
-		}
-	return(ret);
-	}
-
diff --git a/crypto/openssl/crypto/rsa/rsa_sign.c b/crypto/openssl/crypto/rsa/rsa_sign.c
deleted file mode 100644
index 71aabeea1bd7..000000000000
--- a/crypto/openssl/crypto/rsa/rsa_sign.c
+++ /dev/null
@@ -1,249 +0,0 @@
-/* crypto/rsa/rsa_sign.c */
-/* Copyright (C) 1995-1998 Eric Young (eay@cryptsoft.com)
- * All rights reserved.
- *
- * This package is an SSL implementation written
- * by Eric Young (eay@cryptsoft.com).
- * The implementation was written so as to conform with Netscapes SSL.
- * 
- * This library is free for commercial and non-commercial use as long as
- * the following conditions are aheared to.  The following conditions
- * apply to all code found in this distribution, be it the RC4, RSA,
- * lhash, DES, etc., code; not just the SSL code.  The SSL documentation
- * included with this distribution is covered by the same copyright terms
- * except that the holder is Tim Hudson (tjh@cryptsoft.com).
- * 
- * Copyright remains Eric Young's, and as such any Copyright notices in
- * the code are not to be removed.
- * If this package is used in a product, Eric Young should be given attribution
- * as the author of the parts of the library used.
- * This can be in the form of a textual message at program startup or
- * in documentation (online or textual) provided with the package.
- * 
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions
- * are met:
- * 1. Redistributions of source code must retain the copyright
- *    notice, this list of conditions and the following disclaimer.
- * 2. Redistributions in binary form must reproduce the above copyright
- *    notice, this list of conditions and the following disclaimer in the
- *    documentation and/or other materials provided with the distribution.
- * 3. All advertising materials mentioning features or use of this software
- *    must display the following acknowledgement:
- *    "This product includes cryptographic software written by
- *     Eric Young (eay@cryptsoft.com)"
- *    The word 'cryptographic' can be left out if the rouines from the library
- *    being used are not cryptographic related :-).
- * 4. If you include any Windows specific code (or a derivative thereof) from 
- *    the apps directory (application code) you must include an acknowledgement:
- *    "This product includes software written by Tim Hudson (tjh@cryptsoft.com)"
- * 
- * THIS SOFTWARE IS PROVIDED BY ERIC YOUNG ``AS IS'' AND
- * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
- * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
- * ARE DISCLAIMED.  IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE
- * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
- * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
- * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
- * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
- * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
- * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
- * SUCH DAMAGE.
- * 
- * The licence and distribution terms for any publically available version or
- * derivative of this code cannot be changed.  i.e. this code cannot simply be
- * copied and put under another distribution licence
- * [including the GNU Public Licence.]
- */
-
-#include <stdio.h>
-#include "cryptlib.h"
-#include <openssl/bn.h>
-#include <openssl/rsa.h>
-#include <openssl/objects.h>
-#include <openssl/x509.h>
-
-/* Size of an SSL signature: MD5+SHA1 */
-#define SSL_SIG_LENGTH	36
-
-int RSA_sign(int type, const unsigned char *m, unsigned int m_len,
-	     unsigned char *sigret, unsigned int *siglen, RSA *rsa)
-	{
-	X509_SIG sig;
-	ASN1_TYPE parameter;
-	int i,j,ret=1;
-	unsigned char *p, *tmps = NULL;
-	const unsigned char *s = NULL;
-	X509_ALGOR algor;
-	ASN1_OCTET_STRING digest;
-	if((rsa->flags & RSA_FLAG_SIGN_VER) && rsa->meth->rsa_sign)
-		{
-		return rsa->meth->rsa_sign(type, m, m_len,
-			sigret, siglen, rsa);
-		}
-	/* Special case: SSL signature, just check the length */
-	if(type == NID_md5_sha1) {
-		if(m_len != SSL_SIG_LENGTH) {
-			RSAerr(RSA_F_RSA_SIGN,RSA_R_INVALID_MESSAGE_LENGTH);
-			return(0);
-		}
-		i = SSL_SIG_LENGTH;
-		s = m;
-	} else {
-		sig.algor= &algor;
-		sig.algor->algorithm=OBJ_nid2obj(type);
-		if (sig.algor->algorithm == NULL)
-			{
-			RSAerr(RSA_F_RSA_SIGN,RSA_R_UNKNOWN_ALGORITHM_TYPE);
-			return(0);
-			}
-		if (sig.algor->algorithm->length == 0)
-			{
-			RSAerr(RSA_F_RSA_SIGN,RSA_R_THE_ASN1_OBJECT_IDENTIFIER_IS_NOT_KNOWN_FOR_THIS_MD);
-			return(0);
-			}
-		parameter.type=V_ASN1_NULL;
-		parameter.value.ptr=NULL;
-		sig.algor->parameter= &parameter;
-
-		sig.digest= &digest;
-		sig.digest->data=(unsigned char *)m; /* TMP UGLY CAST */
-		sig.digest->length=m_len;
-
-		i=i2d_X509_SIG(&sig,NULL);
-	}
-	j=RSA_size(rsa);
-	if (i > (j-RSA_PKCS1_PADDING_SIZE))
-		{
-		RSAerr(RSA_F_RSA_SIGN,RSA_R_DIGEST_TOO_BIG_FOR_RSA_KEY);
-		return(0);
-		}
-	if(type != NID_md5_sha1) {
-		tmps=(unsigned char *)OPENSSL_malloc((unsigned int)j+1);
-		if (tmps == NULL)
-			{
-			RSAerr(RSA_F_RSA_SIGN,ERR_R_MALLOC_FAILURE);
-			return(0);
-			}
-		p=tmps;
-		i2d_X509_SIG(&sig,&p);
-		s=tmps;
-	}
-	i=RSA_private_encrypt(i,s,sigret,rsa,RSA_PKCS1_PADDING);
-	if (i <= 0)
-		ret=0;
-	else
-		*siglen=i;
-
-	if(type != NID_md5_sha1) {
-		OPENSSL_cleanse(tmps,(unsigned int)j+1);
-		OPENSSL_free(tmps);
-	}
-	return(ret);
-	}
-
-int RSA_verify(int dtype, const unsigned char *m, unsigned int m_len,
-	     unsigned char *sigbuf, unsigned int siglen, RSA *rsa)
-	{
-	int i,ret=0,sigtype;
-	unsigned char *s;
-	X509_SIG *sig=NULL;
-
-	if (siglen != (unsigned int)RSA_size(rsa))
-		{
-		RSAerr(RSA_F_RSA_VERIFY,RSA_R_WRONG_SIGNATURE_LENGTH);
-		return(0);
-		}
-
-	if((rsa->flags & RSA_FLAG_SIGN_VER) && rsa->meth->rsa_verify)
-		{
-		return rsa->meth->rsa_verify(dtype, m, m_len,
-			sigbuf, siglen, rsa);
-		}
-
-	s=(unsigned char *)OPENSSL_malloc((unsigned int)siglen);
-	if (s == NULL)
-		{
-		RSAerr(RSA_F_RSA_VERIFY,ERR_R_MALLOC_FAILURE);
-		goto err;
-		}
-	if((dtype == NID_md5_sha1) && (m_len != SSL_SIG_LENGTH) ) {
-			RSAerr(RSA_F_RSA_VERIFY,RSA_R_INVALID_MESSAGE_LENGTH);
-			goto err;
-	}
-	i=RSA_public_decrypt((int)siglen,sigbuf,s,rsa,RSA_PKCS1_PADDING);
-
-	if (i <= 0) goto err;
-
-	/* Special case: SSL signature */
-	if(dtype == NID_md5_sha1) {
-		if((i != SSL_SIG_LENGTH) || memcmp(s, m, SSL_SIG_LENGTH))
-				RSAerr(RSA_F_RSA_VERIFY,RSA_R_BAD_SIGNATURE);
-		else ret = 1;
-	} else {
-		const unsigned char *p=s;
-		sig=d2i_X509_SIG(NULL,&p,(long)i);
-
-		if (sig == NULL) goto err;
-
-		/* Excess data can be used to create forgeries */
-		if(p != s+i)
-			{
-			RSAerr(RSA_F_RSA_VERIFY,RSA_R_BAD_SIGNATURE);
-			goto err;
-			}
-
-		/* Parameters to the signature algorithm can also be used to
-		   create forgeries */
-		if(sig->algor->parameter
-		   && ASN1_TYPE_get(sig->algor->parameter) != V_ASN1_NULL)
-			{
-			RSAerr(RSA_F_RSA_VERIFY,RSA_R_BAD_SIGNATURE);
-			goto err;
-			}
-
-		sigtype=OBJ_obj2nid(sig->algor->algorithm);
-
-
-	#ifdef RSA_DEBUG
-		/* put a backward compatibility flag in EAY */
-		fprintf(stderr,"in(%s) expect(%s)\n",OBJ_nid2ln(sigtype),
-			OBJ_nid2ln(dtype));
-	#endif
-		if (sigtype != dtype)
-			{
-			if (((dtype == NID_md5) &&
-				(sigtype == NID_md5WithRSAEncryption)) ||
-				((dtype == NID_md2) &&
-				(sigtype == NID_md2WithRSAEncryption)))
-				{
-				/* ok, we will let it through */
-#if !defined(OPENSSL_NO_STDIO) && !defined(OPENSSL_SYS_WIN16)
-				fprintf(stderr,"signature has problems, re-make with post SSLeay045\n");
-#endif
-				}
-			else
-				{
-				RSAerr(RSA_F_RSA_VERIFY,
-						RSA_R_ALGORITHM_MISMATCH);
-				goto err;
-				}
-			}
-		if (	((unsigned int)sig->digest->length != m_len) ||
-			(memcmp(m,sig->digest->data,m_len) != 0))
-			{
-			RSAerr(RSA_F_RSA_VERIFY,RSA_R_BAD_SIGNATURE);
-			}
-		else
-			ret=1;
-	}
-err:
-	if (sig != NULL) X509_SIG_free(sig);
-	if (s != NULL)
-		{
-		OPENSSL_cleanse(s,(unsigned int)siglen);
-		OPENSSL_free(s);
-		}
-	return(ret);
-	}
-
diff --git a/crypto/openssl/crypto/rsa/rsa_ssl.c b/crypto/openssl/crypto/rsa/rsa_ssl.c
deleted file mode 100644
index ea72629494cf..000000000000
--- a/crypto/openssl/crypto/rsa/rsa_ssl.c
+++ /dev/null
@@ -1,154 +0,0 @@
-/* crypto/rsa/rsa_ssl.c */
-/* Copyright (C) 1995-1998 Eric Young (eay@cryptsoft.com)
- * All rights reserved.
- *
- * This package is an SSL implementation written
- * by Eric Young (eay@cryptsoft.com).
- * The implementation was written so as to conform with Netscapes SSL.
- * 
- * This library is free for commercial and non-commercial use as long as
- * the following conditions are aheared to.  The following conditions
- * apply to all code found in this distribution, be it the RC4, RSA,
- * lhash, DES, etc., code; not just the SSL code.  The SSL documentation
- * included with this distribution is covered by the same copyright terms
- * except that the holder is Tim Hudson (tjh@cryptsoft.com).
- * 
- * Copyright remains Eric Young's, and as such any Copyright notices in
- * the code are not to be removed.
- * If this package is used in a product, Eric Young should be given attribution
- * as the author of the parts of the library used.
- * This can be in the form of a textual message at program startup or
- * in documentation (online or textual) provided with the package.
- * 
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions
- * are met:
- * 1. Redistributions of source code must retain the copyright
- *    notice, this list of conditions and the following disclaimer.
- * 2. Redistributions in binary form must reproduce the above copyright
- *    notice, this list of conditions and the following disclaimer in the
- *    documentation and/or other materials provided with the distribution.
- * 3. All advertising materials mentioning features or use of this software
- *    must display the following acknowledgement:
- *    "This product includes cryptographic software written by
- *     Eric Young (eay@cryptsoft.com)"
- *    The word 'cryptographic' can be left out if the rouines from the library
- *    being used are not cryptographic related :-).
- * 4. If you include any Windows specific code (or a derivative thereof) from 
- *    the apps directory (application code) you must include an acknowledgement:
- *    "This product includes software written by Tim Hudson (tjh@cryptsoft.com)"
- * 
- * THIS SOFTWARE IS PROVIDED BY ERIC YOUNG ``AS IS'' AND
- * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
- * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
- * ARE DISCLAIMED.  IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE
- * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
- * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
- * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
- * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
- * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
- * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
- * SUCH DAMAGE.
- * 
- * The licence and distribution terms for any publically available version or
- * derivative of this code cannot be changed.  i.e. this code cannot simply be
- * copied and put under another distribution licence
- * [including the GNU Public Licence.]
- */
-
-#include <stdio.h>
-#include "cryptlib.h"
-#include <openssl/bn.h>
-#include <openssl/rsa.h>
-#include <openssl/rand.h>
-
-int RSA_padding_add_SSLv23(unsigned char *to, int tlen,
-	const unsigned char *from, int flen)
-	{
-	int i,j;
-	unsigned char *p;
-	
-	if (flen > (tlen-11))
-		{
-		RSAerr(RSA_F_RSA_PADDING_ADD_SSLV23,RSA_R_DATA_TOO_LARGE_FOR_KEY_SIZE);
-		return(0);
-		}
-	
-	p=(unsigned char *)to;
-
-	*(p++)=0;
-	*(p++)=2; /* Public Key BT (Block Type) */
-
-	/* pad out with non-zero random data */
-	j=tlen-3-8-flen;
-
-	if (RAND_bytes(p,j) <= 0)
-		return(0);
-	for (i=0; i<j; i++)
-		{
-		if (*p == '\0')
-			do	{
-				if (RAND_bytes(p,1) <= 0)
-					return(0);
-				} while (*p == '\0');
-		p++;
-		}
-
-	memset(p,3,8);
-	p+=8;
-	*(p++)='\0';
-
-	memcpy(p,from,(unsigned int)flen);
-	return(1);
-	}
-
-int RSA_padding_check_SSLv23(unsigned char *to, int tlen,
-	const unsigned char *from, int flen, int num)
-	{
-	int i,j,k;
-	const unsigned char *p;
-
-	p=from;
-	if (flen < 10)
-		{
-		RSAerr(RSA_F_RSA_PADDING_CHECK_SSLV23,RSA_R_DATA_TOO_SMALL);
-		return(-1);
-		}
-	if ((num != (flen+1)) || (*(p++) != 02))
-		{
-		RSAerr(RSA_F_RSA_PADDING_CHECK_SSLV23,RSA_R_BLOCK_TYPE_IS_NOT_02);
-		return(-1);
-		}
-
-	/* scan over padding data */
-	j=flen-1; /* one for type */
-	for (i=0; i<j; i++)
-		if (*(p++) == 0) break;
-
-	if ((i == j) || (i < 8))
-		{
-		RSAerr(RSA_F_RSA_PADDING_CHECK_SSLV23,RSA_R_NULL_BEFORE_BLOCK_MISSING);
-		return(-1);
-		}
-	for (k= -8; k<0; k++)
-		{
-		if (p[k] !=  0x03) break;
-		}
-	if (k == -1)
-		{
-		RSAerr(RSA_F_RSA_PADDING_CHECK_SSLV23,RSA_R_SSLV3_ROLLBACK_ATTACK);
-		return(-1);
-		}
-
-	i++; /* Skip over the '\0' */
-	j-=i;
-	if (j > tlen)
-		{
-		RSAerr(RSA_F_RSA_PADDING_CHECK_SSLV23,RSA_R_DATA_TOO_LARGE);
-		return(-1);
-		}
-	memcpy(to,p,(unsigned int)j);
-
-	return(j);
-	}
-
diff --git a/crypto/openssl/crypto/rsa/rsa_test.c b/crypto/openssl/crypto/rsa/rsa_test.c
deleted file mode 100644
index 0f8059ccfdfc..000000000000
--- a/crypto/openssl/crypto/rsa/rsa_test.c
+++ /dev/null
@@ -1,322 +0,0 @@
-/* test vectors from p1ovect1.txt */
-
-#include <stdio.h>
-#include <string.h>
-
-#include "e_os.h"
-
-#include <openssl/crypto.h>
-#include <openssl/err.h>
-#include <openssl/rand.h>
-#include <openssl/bn.h>
-#ifdef OPENSSL_NO_RSA
-int main(int argc, char *argv[])
-{
-    printf("No RSA support\n");
-    return(0);
-}
-#else
-#include <openssl/rsa.h>
-
-#define SetKey \
-  key->n = BN_bin2bn(n, sizeof(n)-1, key->n); \
-  key->e = BN_bin2bn(e, sizeof(e)-1, key->e); \
-  key->d = BN_bin2bn(d, sizeof(d)-1, key->d); \
-  key->p = BN_bin2bn(p, sizeof(p)-1, key->p); \
-  key->q = BN_bin2bn(q, sizeof(q)-1, key->q); \
-  key->dmp1 = BN_bin2bn(dmp1, sizeof(dmp1)-1, key->dmp1); \
-  key->dmq1 = BN_bin2bn(dmq1, sizeof(dmq1)-1, key->dmq1); \
-  key->iqmp = BN_bin2bn(iqmp, sizeof(iqmp)-1, key->iqmp); \
-  memcpy(c, ctext_ex, sizeof(ctext_ex) - 1); \
-  return (sizeof(ctext_ex) - 1);
-
-static int key1(RSA *key, unsigned char *c)
-    {
-    static unsigned char n[] =
-"\x00\xAA\x36\xAB\xCE\x88\xAC\xFD\xFF\x55\x52\x3C\x7F\xC4\x52\x3F"
-"\x90\xEF\xA0\x0D\xF3\x77\x4A\x25\x9F\x2E\x62\xB4\xC5\xD9\x9C\xB5"
-"\xAD\xB3\x00\xA0\x28\x5E\x53\x01\x93\x0E\x0C\x70\xFB\x68\x76\x93"
-"\x9C\xE6\x16\xCE\x62\x4A\x11\xE0\x08\x6D\x34\x1E\xBC\xAC\xA0\xA1"
-"\xF5";
-
-    static unsigned char e[] = "\x11";
-
-    static unsigned char d[] =
-"\x0A\x03\x37\x48\x62\x64\x87\x69\x5F\x5F\x30\xBC\x38\xB9\x8B\x44"
-"\xC2\xCD\x2D\xFF\x43\x40\x98\xCD\x20\xD8\xA1\x38\xD0\x90\xBF\x64"
-"\x79\x7C\x3F\xA7\xA2\xCD\xCB\x3C\xD1\xE0\xBD\xBA\x26\x54\xB4\xF9"
-"\xDF\x8E\x8A\xE5\x9D\x73\x3D\x9F\x33\xB3\x01\x62\x4A\xFD\x1D\x51";
-
-    static unsigned char p[] =
-"\x00\xD8\x40\xB4\x16\x66\xB4\x2E\x92\xEA\x0D\xA3\xB4\x32\x04\xB5"
-"\xCF\xCE\x33\x52\x52\x4D\x04\x16\xA5\xA4\x41\xE7\x00\xAF\x46\x12"
-"\x0D";
-    
-    static unsigned char q[] =
-"\x00\xC9\x7F\xB1\xF0\x27\xF4\x53\xF6\x34\x12\x33\xEA\xAA\xD1\xD9"
-"\x35\x3F\x6C\x42\xD0\x88\x66\xB1\xD0\x5A\x0F\x20\x35\x02\x8B\x9D"
-"\x89";
-
-    static unsigned char dmp1[] =
-"\x59\x0B\x95\x72\xA2\xC2\xA9\xC4\x06\x05\x9D\xC2\xAB\x2F\x1D\xAF"
-"\xEB\x7E\x8B\x4F\x10\xA7\x54\x9E\x8E\xED\xF5\xB4\xFC\xE0\x9E\x05";
-
-    static unsigned char dmq1[] =
-"\x00\x8E\x3C\x05\x21\xFE\x15\xE0\xEA\x06\xA3\x6F\xF0\xF1\x0C\x99"
-"\x52\xC3\x5B\x7A\x75\x14\xFD\x32\x38\xB8\x0A\xAD\x52\x98\x62\x8D"
-"\x51";
-
-    static unsigned char iqmp[] =
-"\x36\x3F\xF7\x18\x9D\xA8\xE9\x0B\x1D\x34\x1F\x71\xD0\x9B\x76\xA8"
-"\xA9\x43\xE1\x1D\x10\xB2\x4D\x24\x9F\x2D\xEA\xFE\xF8\x0C\x18\x26";
-
-    static unsigned char ctext_ex[] =
-"\x1b\x8f\x05\xf9\xca\x1a\x79\x52\x6e\x53\xf3\xcc\x51\x4f\xdb\x89"
-"\x2b\xfb\x91\x93\x23\x1e\x78\xb9\x92\xe6\x8d\x50\xa4\x80\xcb\x52"
-"\x33\x89\x5c\x74\x95\x8d\x5d\x02\xab\x8c\x0f\xd0\x40\xeb\x58\x44"
-"\xb0\x05\xc3\x9e\xd8\x27\x4a\x9d\xbf\xa8\x06\x71\x40\x94\x39\xd2";
-
-    SetKey;
-    }
-
-static int key2(RSA *key, unsigned char *c)
-    {
-    static unsigned char n[] =
-"\x00\xA3\x07\x9A\x90\xDF\x0D\xFD\x72\xAC\x09\x0C\xCC\x2A\x78\xB8"
-"\x74\x13\x13\x3E\x40\x75\x9C\x98\xFA\xF8\x20\x4F\x35\x8A\x0B\x26"
-"\x3C\x67\x70\xE7\x83\xA9\x3B\x69\x71\xB7\x37\x79\xD2\x71\x7B\xE8"
-"\x34\x77\xCF";
-
-    static unsigned char e[] = "\x3";
-
-    static unsigned char d[] =
-"\x6C\xAF\xBC\x60\x94\xB3\xFE\x4C\x72\xB0\xB3\x32\xC6\xFB\x25\xA2"
-"\xB7\x62\x29\x80\x4E\x68\x65\xFC\xA4\x5A\x74\xDF\x0F\x8F\xB8\x41"
-"\x3B\x52\xC0\xD0\xE5\x3D\x9B\x59\x0F\xF1\x9B\xE7\x9F\x49\xDD\x21"
-"\xE5\xEB";
-
-    static unsigned char p[] =
-"\x00\xCF\x20\x35\x02\x8B\x9D\x86\x98\x40\xB4\x16\x66\xB4\x2E\x92"
-"\xEA\x0D\xA3\xB4\x32\x04\xB5\xCF\xCE\x91";
-
-    static unsigned char q[] =
-"\x00\xC9\x7F\xB1\xF0\x27\xF4\x53\xF6\x34\x12\x33\xEA\xAA\xD1\xD9"
-"\x35\x3F\x6C\x42\xD0\x88\x66\xB1\xD0\x5F";
-    
-    static unsigned char dmp1[] =
-"\x00\x8A\x15\x78\xAC\x5D\x13\xAF\x10\x2B\x22\xB9\x99\xCD\x74\x61"
-"\xF1\x5E\x6D\x22\xCC\x03\x23\xDF\xDF\x0B";
-
-    static unsigned char dmq1[] =
-"\x00\x86\x55\x21\x4A\xC5\x4D\x8D\x4E\xCD\x61\x77\xF1\xC7\x36\x90"
-"\xCE\x2A\x48\x2C\x8B\x05\x99\xCB\xE0\x3F";
-
-    static unsigned char iqmp[] =
-"\x00\x83\xEF\xEF\xB8\xA9\xA4\x0D\x1D\xB6\xED\x98\xAD\x84\xED\x13"
-"\x35\xDC\xC1\x08\xF3\x22\xD0\x57\xCF\x8D";
-
-    static unsigned char ctext_ex[] =
-"\x14\xbd\xdd\x28\xc9\x83\x35\x19\x23\x80\xe8\xe5\x49\xb1\x58\x2a"
-"\x8b\x40\xb4\x48\x6d\x03\xa6\xa5\x31\x1f\x1f\xd5\xf0\xa1\x80\xe4"
-"\x17\x53\x03\x29\xa9\x34\x90\x74\xb1\x52\x13\x54\x29\x08\x24\x52"
-"\x62\x51";
-
-    SetKey;
-    }
-
-static int key3(RSA *key, unsigned char *c)
-    {
-    static unsigned char n[] =
-"\x00\xBB\xF8\x2F\x09\x06\x82\xCE\x9C\x23\x38\xAC\x2B\x9D\xA8\x71"
-"\xF7\x36\x8D\x07\xEE\xD4\x10\x43\xA4\x40\xD6\xB6\xF0\x74\x54\xF5"
-"\x1F\xB8\xDF\xBA\xAF\x03\x5C\x02\xAB\x61\xEA\x48\xCE\xEB\x6F\xCD"
-"\x48\x76\xED\x52\x0D\x60\xE1\xEC\x46\x19\x71\x9D\x8A\x5B\x8B\x80"
-"\x7F\xAF\xB8\xE0\xA3\xDF\xC7\x37\x72\x3E\xE6\xB4\xB7\xD9\x3A\x25"
-"\x84\xEE\x6A\x64\x9D\x06\x09\x53\x74\x88\x34\xB2\x45\x45\x98\x39"
-"\x4E\xE0\xAA\xB1\x2D\x7B\x61\xA5\x1F\x52\x7A\x9A\x41\xF6\xC1\x68"
-"\x7F\xE2\x53\x72\x98\xCA\x2A\x8F\x59\x46\xF8\xE5\xFD\x09\x1D\xBD"
-"\xCB";
-
-    static unsigned char e[] = "\x11";
-
-    static unsigned char d[] =
-"\x00\xA5\xDA\xFC\x53\x41\xFA\xF2\x89\xC4\xB9\x88\xDB\x30\xC1\xCD"
-"\xF8\x3F\x31\x25\x1E\x06\x68\xB4\x27\x84\x81\x38\x01\x57\x96\x41"
-"\xB2\x94\x10\xB3\xC7\x99\x8D\x6B\xC4\x65\x74\x5E\x5C\x39\x26\x69"
-"\xD6\x87\x0D\xA2\xC0\x82\xA9\x39\xE3\x7F\xDC\xB8\x2E\xC9\x3E\xDA"
-"\xC9\x7F\xF3\xAD\x59\x50\xAC\xCF\xBC\x11\x1C\x76\xF1\xA9\x52\x94"
-"\x44\xE5\x6A\xAF\x68\xC5\x6C\x09\x2C\xD3\x8D\xC3\xBE\xF5\xD2\x0A"
-"\x93\x99\x26\xED\x4F\x74\xA1\x3E\xDD\xFB\xE1\xA1\xCE\xCC\x48\x94"
-"\xAF\x94\x28\xC2\xB7\xB8\x88\x3F\xE4\x46\x3A\x4B\xC8\x5B\x1C\xB3"
-"\xC1";
-
-    static unsigned char p[] =
-"\x00\xEE\xCF\xAE\x81\xB1\xB9\xB3\xC9\x08\x81\x0B\x10\xA1\xB5\x60"
-"\x01\x99\xEB\x9F\x44\xAE\xF4\xFD\xA4\x93\xB8\x1A\x9E\x3D\x84\xF6"
-"\x32\x12\x4E\xF0\x23\x6E\x5D\x1E\x3B\x7E\x28\xFA\xE7\xAA\x04\x0A"
-"\x2D\x5B\x25\x21\x76\x45\x9D\x1F\x39\x75\x41\xBA\x2A\x58\xFB\x65"
-"\x99";
-
-    static unsigned char q[] =
-"\x00\xC9\x7F\xB1\xF0\x27\xF4\x53\xF6\x34\x12\x33\xEA\xAA\xD1\xD9"
-"\x35\x3F\x6C\x42\xD0\x88\x66\xB1\xD0\x5A\x0F\x20\x35\x02\x8B\x9D"
-"\x86\x98\x40\xB4\x16\x66\xB4\x2E\x92\xEA\x0D\xA3\xB4\x32\x04\xB5"
-"\xCF\xCE\x33\x52\x52\x4D\x04\x16\xA5\xA4\x41\xE7\x00\xAF\x46\x15"
-"\x03";
-
-    static unsigned char dmp1[] =
-"\x54\x49\x4C\xA6\x3E\xBA\x03\x37\xE4\xE2\x40\x23\xFC\xD6\x9A\x5A"
-"\xEB\x07\xDD\xDC\x01\x83\xA4\xD0\xAC\x9B\x54\xB0\x51\xF2\xB1\x3E"
-"\xD9\x49\x09\x75\xEA\xB7\x74\x14\xFF\x59\xC1\xF7\x69\x2E\x9A\x2E"
-"\x20\x2B\x38\xFC\x91\x0A\x47\x41\x74\xAD\xC9\x3C\x1F\x67\xC9\x81";
-
-    static unsigned char dmq1[] =
-"\x47\x1E\x02\x90\xFF\x0A\xF0\x75\x03\x51\xB7\xF8\x78\x86\x4C\xA9"
-"\x61\xAD\xBD\x3A\x8A\x7E\x99\x1C\x5C\x05\x56\xA9\x4C\x31\x46\xA7"
-"\xF9\x80\x3F\x8F\x6F\x8A\xE3\x42\xE9\x31\xFD\x8A\xE4\x7A\x22\x0D"
-"\x1B\x99\xA4\x95\x84\x98\x07\xFE\x39\xF9\x24\x5A\x98\x36\xDA\x3D";
-    
-    static unsigned char iqmp[] =
-"\x00\xB0\x6C\x4F\xDA\xBB\x63\x01\x19\x8D\x26\x5B\xDB\xAE\x94\x23"
-"\xB3\x80\xF2\x71\xF7\x34\x53\x88\x50\x93\x07\x7F\xCD\x39\xE2\x11"
-"\x9F\xC9\x86\x32\x15\x4F\x58\x83\xB1\x67\xA9\x67\xBF\x40\x2B\x4E"
-"\x9E\x2E\x0F\x96\x56\xE6\x98\xEA\x36\x66\xED\xFB\x25\x79\x80\x39"
-"\xF7";
-
-    static unsigned char ctext_ex[] =
-"\xb8\x24\x6b\x56\xa6\xed\x58\x81\xae\xb5\x85\xd9\xa2\x5b\x2a\xd7"
-"\x90\xc4\x17\xe0\x80\x68\x1b\xf1\xac\x2b\xc3\xde\xb6\x9d\x8b\xce"
-"\xf0\xc4\x36\x6f\xec\x40\x0a\xf0\x52\xa7\x2e\x9b\x0e\xff\xb5\xb3"
-"\xf2\xf1\x92\xdb\xea\xca\x03\xc1\x27\x40\x05\x71\x13\xbf\x1f\x06"
-"\x69\xac\x22\xe9\xf3\xa7\x85\x2e\x3c\x15\xd9\x13\xca\xb0\xb8\x86"
-"\x3a\x95\xc9\x92\x94\xce\x86\x74\x21\x49\x54\x61\x03\x46\xf4\xd4"
-"\x74\xb2\x6f\x7c\x48\xb4\x2e\xe6\x8e\x1f\x57\x2a\x1f\xc4\x02\x6a"
-"\xc4\x56\xb4\xf5\x9f\x7b\x62\x1e\xa1\xb9\xd8\x8f\x64\x20\x2f\xb1";
-
-    SetKey;
-    }
-
-static int pad_unknown(void)
-{
-    unsigned long l;
-    while ((l = ERR_get_error()) != 0)
-      if (ERR_GET_REASON(l) == RSA_R_UNKNOWN_PADDING_TYPE)
-	return(1);
-    return(0);
-}
-
-static const char rnd_seed[] = "string to make the random number generator think it has entropy";
-
-int main(int argc, char *argv[])
-    {
-    int err=0;
-    int v;
-    RSA *key;
-    unsigned char ptext[256];
-    unsigned char ctext[256];
-    static unsigned char ptext_ex[] = "\x54\x85\x9b\x34\x2c\x49\xea\x2a";
-    unsigned char ctext_ex[256];
-    int plen;
-    int clen = 0;
-    int num;
-
-    CRYPTO_malloc_debug_init();
-    CRYPTO_dbg_set_options(V_CRYPTO_MDEBUG_ALL);
-    CRYPTO_mem_ctrl(CRYPTO_MEM_CHECK_ON);
-
-    RAND_seed(rnd_seed, sizeof rnd_seed); /* or OAEP may fail */
-
-    plen = sizeof(ptext_ex) - 1;
-
-    for (v = 0; v < 6; v++)
-	{
-	key = RSA_new();
-	switch (v%3) {
-    case 0:
-	clen = key1(key, ctext_ex);
-	break;
-    case 1:
-	clen = key2(key, ctext_ex);
-	break;
-    case 2:
-	clen = key3(key, ctext_ex);
-	break;
-	}
-	if (v/3 > 1) key->flags |= RSA_FLAG_NO_EXP_CONSTTIME;
-
-	num = RSA_public_encrypt(plen, ptext_ex, ctext, key,
-				 RSA_PKCS1_PADDING);
-	if (num != clen)
-	    {
-	    printf("PKCS#1 v1.5 encryption failed!\n");
-	    err=1;
-	    goto oaep;
-	    }
-  
-	num = RSA_private_decrypt(num, ctext, ptext, key,
-				  RSA_PKCS1_PADDING);
-	if (num != plen || memcmp(ptext, ptext_ex, num) != 0)
-	    {
-	    printf("PKCS#1 v1.5 decryption failed!\n");
-	    err=1;
-	    }
-	else
-	    printf("PKCS #1 v1.5 encryption/decryption ok\n");
-
-    oaep:
-	ERR_clear_error();
-	num = RSA_public_encrypt(plen, ptext_ex, ctext, key,
-				 RSA_PKCS1_OAEP_PADDING);
-	if (num == -1 && pad_unknown())
-	    {
-	    printf("No OAEP support\n");
-	    goto next;
-	    }
-	if (num != clen)
-	    {
-	    printf("OAEP encryption failed!\n");
-	    err=1;
-	    goto next;
-	    }
-  
-	num = RSA_private_decrypt(num, ctext, ptext, key,
-				  RSA_PKCS1_OAEP_PADDING);
-	if (num != plen || memcmp(ptext, ptext_ex, num) != 0)
-	    {
-	    printf("OAEP decryption (encrypted data) failed!\n");
-	    err=1;
-	    }
-	else if (memcmp(ctext, ctext_ex, num) == 0)
-	    {
-	    printf("OAEP test vector %d passed!\n", v);
-	    goto next;
-	    }
-    
-	/* Different ciphertexts (rsa_oaep.c without -DPKCS_TESTVECT).
-	   Try decrypting ctext_ex */
-
-	num = RSA_private_decrypt(clen, ctext_ex, ptext, key,
-				  RSA_PKCS1_OAEP_PADDING);
-
-	if (num != plen || memcmp(ptext, ptext_ex, num) != 0)
-	    {
-	    printf("OAEP decryption (test vector data) failed!\n");
-	    err=1;
-	    }
-	else
-	    printf("OAEP encryption/decryption ok\n");
-    next:
-	RSA_free(key);
-	}
-
-    CRYPTO_cleanup_all_ex_data();
-    ERR_remove_state(0);
-
-    CRYPTO_mem_leaks_fp(stderr);
-
-#ifdef OPENSSL_SYS_NETWARE
-    if (err) printf("ERROR: %d\n", err);
-#endif
-    return err;
-    }
-#endif
diff --git a/crypto/openssl/crypto/rsa/rsa_x931.c b/crypto/openssl/crypto/rsa/rsa_x931.c
deleted file mode 100644
index e91865417626..000000000000
--- a/crypto/openssl/crypto/rsa/rsa_x931.c
+++ /dev/null
@@ -1,177 +0,0 @@
-/* rsa_x931.c */
-/* Written by Dr Stephen N Henson (shenson@bigfoot.com) for the OpenSSL
- * project 2005.
- */
-/* ====================================================================
- * Copyright (c) 2005 The OpenSSL Project.  All rights reserved.
- *
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions
- * are met:
- *
- * 1. Redistributions of source code must retain the above copyright
- *    notice, this list of conditions and the following disclaimer. 
- *
- * 2. Redistributions in binary form must reproduce the above copyright
- *    notice, this list of conditions and the following disclaimer in
- *    the documentation and/or other materials provided with the
- *    distribution.
- *
- * 3. All advertising materials mentioning features or use of this
- *    software must display the following acknowledgment:
- *    "This product includes software developed by the OpenSSL Project
- *    for use in the OpenSSL Toolkit. (http://www.OpenSSL.org/)"
- *
- * 4. The names "OpenSSL Toolkit" and "OpenSSL Project" must not be used to
- *    endorse or promote products derived from this software without
- *    prior written permission. For written permission, please contact
- *    licensing@OpenSSL.org.
- *
- * 5. Products derived from this software may not be called "OpenSSL"
- *    nor may "OpenSSL" appear in their names without prior written
- *    permission of the OpenSSL Project.
- *
- * 6. Redistributions of any form whatsoever must retain the following
- *    acknowledgment:
- *    "This product includes software developed by the OpenSSL Project
- *    for use in the OpenSSL Toolkit (http://www.OpenSSL.org/)"
- *
- * THIS SOFTWARE IS PROVIDED BY THE OpenSSL PROJECT ``AS IS'' AND ANY
- * EXPRESSED OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
- * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR
- * PURPOSE ARE DISCLAIMED.  IN NO EVENT SHALL THE OpenSSL PROJECT OR
- * ITS CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
- * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
- * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
- * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
- * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
- * STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
- * ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED
- * OF THE POSSIBILITY OF SUCH DAMAGE.
- * ====================================================================
- *
- * This product includes cryptographic software written by Eric Young
- * (eay@cryptsoft.com).  This product includes software written by Tim
- * Hudson (tjh@cryptsoft.com).
- *
- */
-
-#include <stdio.h>
-#include "cryptlib.h"
-#include <openssl/bn.h>
-#include <openssl/rsa.h>
-#include <openssl/rand.h>
-#include <openssl/objects.h>
-
-int RSA_padding_add_X931(unsigned char *to, int tlen,
-	     const unsigned char *from, int flen)
-	{
-	int j;
-	unsigned char *p;
-
-	/* Absolute minimum amount of padding is 1 header nibble, 1 padding
-	 * nibble and 2 trailer bytes: but 1 hash if is already in 'from'.
-	 */
-
-	j = tlen - flen - 2;
-
-	if (j < 0)
-		{
-		RSAerr(RSA_F_RSA_PADDING_ADD_X931,RSA_R_DATA_TOO_LARGE_FOR_KEY_SIZE);
-		return -1;
-		}
-	
-	p=(unsigned char *)to;
-
-	/* If no padding start and end nibbles are in one byte */
-	if (j == 0)
-		*p++ = 0x6A;
-	else
-		{
-		*p++ = 0x6B;
-		if (j > 1)
-			{
-			memset(p, 0xBB, j - 1);
-			p += j - 1;
-			}
-		*p++ = 0xBA;
-		}
-	memcpy(p,from,(unsigned int)flen);
-	p += flen;
-	*p = 0xCC;
-	return(1);
-	}
-
-int RSA_padding_check_X931(unsigned char *to, int tlen,
-	     const unsigned char *from, int flen, int num)
-	{
-	int i = 0,j;
-	const unsigned char *p;
-
-	p=from;
-	if ((num != flen) || ((*p != 0x6A) && (*p != 0x6B)))
-		{
-		RSAerr(RSA_F_RSA_PADDING_CHECK_X931,RSA_R_INVALID_HEADER);
-		return -1;
-		}
-
-	if (*p++ == 0x6B)
-		{
-		j=flen-3;
-		for (i = 0; i < j; i++)
-			{
-			unsigned char c = *p++;
-			if (c == 0xBA)
-				break;
-			if (c != 0xBB)
-				{
-				RSAerr(RSA_F_RSA_PADDING_CHECK_X931,
-					RSA_R_INVALID_PADDING);
-				return -1;
-				}
-			}
-
-		j -= i;
-
-		if (i == 0)
-			{
-			RSAerr(RSA_F_RSA_PADDING_CHECK_X931, RSA_R_INVALID_PADDING);
-			return -1;
-			}
-
-		}
-	else j = flen - 2;
-
-	if (p[j] != 0xCC)
-		{
-		RSAerr(RSA_F_RSA_PADDING_CHECK_X931, RSA_R_INVALID_TRAILER);
-		return -1;
-		}
-
-	memcpy(to,p,(unsigned int)j);
-
-	return(j);
-	}
-
-/* Translate between X931 hash ids and NIDs */
-
-int RSA_X931_hash_id(int nid)
-	{
-	switch (nid)
-		{
-		case NID_sha1:
-		return 0x33;
-
-		case NID_sha256:
-		return 0x34;
-
-		case NID_sha384:
-		return 0x36;
-
-		case NID_sha512:
-		return 0x35;
-
-		}
-	return -1;
-	}
-
diff --git a/crypto/openssl/crypto/sha/Makefile b/crypto/openssl/crypto/sha/Makefile
deleted file mode 100644
index 42a8c5b443be..000000000000
--- a/crypto/openssl/crypto/sha/Makefile
+++ /dev/null
@@ -1,134 +0,0 @@
-#
-# OpenSSL/crypto/sha/Makefile
-#
-
-DIR=    sha
-TOP=    ../..
-CC=     cc
-CPP=    $(CC) -E
-INCLUDES=
-CFLAG=-g
-MAKEFILE=       Makefile
-AR=             ar r
-
-SHA1_ASM_OBJ=
-
-CFLAGS= $(INCLUDES) $(CFLAG)
-ASFLAGS= $(INCLUDES) $(ASFLAG)
-AFLAGS= $(ASFLAGS)
-
-GENERAL=Makefile
-TEST=shatest.c sha1test.c sha256t.c sha512t.c
-APPS=
-
-LIB=$(TOP)/libcrypto.a
-LIBSRC=sha_dgst.c sha1dgst.c sha_one.c sha1_one.c sha256.c sha512.c
-LIBOBJ=sha_dgst.o sha1dgst.o sha_one.o sha1_one.o sha256.o sha512.o $(SHA1_ASM_OBJ)
-
-SRC= $(LIBSRC)
-
-EXHEADER= sha.h
-HEADER= sha_locl.h $(EXHEADER)
-
-ALL=    $(GENERAL) $(SRC) $(HEADER)
-
-top:
-	(cd ../..; $(MAKE) DIRS=crypto SDIRS=$(DIR) sub_all)
-
-all:    lib
-
-lib:    $(LIBOBJ)
-	$(AR) $(LIB) $(LIBOBJ)
-	$(RANLIB) $(LIB) || echo Never mind.
-	@touch lib
-
-# ELF
-sx86-elf.s: asm/sha1-586.pl ../perlasm/x86asm.pl
-	(cd asm; $(PERL) sha1-586.pl elf $(CFLAGS) $(PROCESSOR) > ../$@)
-s512sse2-elf.s:	asm/sha512-sse2.pl ../perlasm/x86asm.pl
-	(cd asm; $(PERL) sha512-sse2.pl elf $(CFLAGS) $(PROCESSOR) > ../$@)
-# COFF
-sx86-cof.s: asm/sha1-586.pl ../perlasm/x86asm.pl
-	(cd asm; $(PERL) sha1-586.pl coff $(CFLAGS) $(PROCESSOR) > ../$@)
-s512sse2-cof.s:     asm/sha512-sse2.pl ../perlasm/x86asm.pl
-	(cd asm; $(PERL) sha512-sse2.pl coff $(CFLAGS) $(PROCESSOR) > ../$@)
-# a.out
-sx86-out.s: asm/sha1-586.pl ../perlasm/x86asm.pl
-	(cd asm; $(PERL) sha1-586.pl a.out $(CFLAGS) $(PROCESSOR) > ../$@)
-s512sse2-out.s:     asm/sha512-sse2.pl ../perlasm/x86asm.pl
-	(cd asm; $(PERL) sha512-sse2.pl a.out $(CFLAGS) $(PROCESSOR) > ../$@)
-
-sha1-ia64.s:   asm/sha1-ia64.pl
-	(cd asm; $(PERL) sha1-ia64.pl $(CFLAGS) ) > $@
-sha256-ia64.s: asm/sha512-ia64.pl
-	(cd asm; $(PERL) sha512-ia64.pl ../$@ $(CFLAGS))
-sha512-ia64.s: asm/sha512-ia64.pl
-	(cd asm; $(PERL) sha512-ia64.pl ../$@ $(CFLAGS))
-
-files:
-	$(PERL) $(TOP)/util/files.pl Makefile >> $(TOP)/MINFO
-
-links:
-	@$(PERL) $(TOP)/util/mklink.pl ../../include/openssl $(EXHEADER)
-	@$(PERL) $(TOP)/util/mklink.pl ../../test $(TEST)
-	@$(PERL) $(TOP)/util/mklink.pl ../../apps $(APPS)
-
-install:
-	@[ -n "$(INSTALLTOP)" ] # should be set by top Makefile...
-	@headerlist="$(EXHEADER)"; for i in $$headerlist ; \
-	do  \
-	(cp $$i $(INSTALL_PREFIX)$(INSTALLTOP)/include/openssl/$$i; \
-	chmod 644 $(INSTALL_PREFIX)$(INSTALLTOP)/include/openssl/$$i ); \
-	done;
-
-tags:
-	ctags $(SRC)
-
-tests:
-
-lint:
-	lint -DLINT $(INCLUDES) $(SRC)>fluff
-
-depend:
-	@[ -n "$(MAKEDEPEND)" ] # should be set by upper Makefile...
-	$(MAKEDEPEND) -- $(CFLAG) $(INCLUDES) $(DEPFLAG) -- $(PROGS) $(LIBSRC)
-
-dclean:
-	$(PERL) -pe 'if (/^# DO NOT DELETE THIS LINE/) {print; exit(0);}' $(MAKEFILE) >Makefile.new
-	mv -f Makefile.new $(MAKEFILE)
-
-clean:
-	rm -f *.s *.o *.obj lib tags core .pure .nfs* *.old *.bak fluff
-
-# DO NOT DELETE THIS LINE -- make depend depends on it.
-
-sha1_one.o: ../../include/openssl/crypto.h ../../include/openssl/e_os2.h
-sha1_one.o: ../../include/openssl/opensslconf.h
-sha1_one.o: ../../include/openssl/opensslv.h ../../include/openssl/ossl_typ.h
-sha1_one.o: ../../include/openssl/safestack.h ../../include/openssl/sha.h
-sha1_one.o: ../../include/openssl/stack.h ../../include/openssl/symhacks.h
-sha1_one.o: sha1_one.c
-sha1dgst.o: ../../include/openssl/e_os2.h ../../include/openssl/opensslconf.h
-sha1dgst.o: ../../include/openssl/opensslv.h ../../include/openssl/sha.h
-sha1dgst.o: ../md32_common.h sha1dgst.c sha_locl.h
-sha256.o: ../../include/openssl/crypto.h ../../include/openssl/e_os2.h
-sha256.o: ../../include/openssl/opensslconf.h ../../include/openssl/opensslv.h
-sha256.o: ../../include/openssl/ossl_typ.h ../../include/openssl/safestack.h
-sha256.o: ../../include/openssl/sha.h ../../include/openssl/stack.h
-sha256.o: ../../include/openssl/symhacks.h ../md32_common.h sha256.c
-sha512.o: ../../e_os.h ../../include/openssl/bio.h
-sha512.o: ../../include/openssl/buffer.h ../../include/openssl/crypto.h
-sha512.o: ../../include/openssl/e_os2.h ../../include/openssl/err.h
-sha512.o: ../../include/openssl/lhash.h ../../include/openssl/opensslconf.h
-sha512.o: ../../include/openssl/opensslv.h ../../include/openssl/ossl_typ.h
-sha512.o: ../../include/openssl/safestack.h ../../include/openssl/sha.h
-sha512.o: ../../include/openssl/stack.h ../../include/openssl/symhacks.h
-sha512.o: ../cryptlib.h sha512.c
-sha_dgst.o: ../../include/openssl/e_os2.h ../../include/openssl/opensslconf.h
-sha_dgst.o: ../../include/openssl/opensslv.h ../../include/openssl/sha.h
-sha_dgst.o: ../md32_common.h sha_dgst.c sha_locl.h
-sha_one.o: ../../include/openssl/crypto.h ../../include/openssl/e_os2.h
-sha_one.o: ../../include/openssl/opensslconf.h ../../include/openssl/opensslv.h
-sha_one.o: ../../include/openssl/ossl_typ.h ../../include/openssl/safestack.h
-sha_one.o: ../../include/openssl/sha.h ../../include/openssl/stack.h
-sha_one.o: ../../include/openssl/symhacks.h sha_one.c
diff --git a/crypto/openssl/crypto/sha/asm/README b/crypto/openssl/crypto/sha/asm/README
deleted file mode 100644
index b7e755765fcc..000000000000
--- a/crypto/openssl/crypto/sha/asm/README
+++ /dev/null
@@ -1 +0,0 @@
-C2.pl works
diff --git a/crypto/openssl/crypto/sha/asm/sha1-586.pl b/crypto/openssl/crypto/sha/asm/sha1-586.pl
deleted file mode 100644
index 4f8521f1e2ca..000000000000
--- a/crypto/openssl/crypto/sha/asm/sha1-586.pl
+++ /dev/null
@@ -1,430 +0,0 @@
-#!/usr/local/bin/perl
-
-# It was noted that Intel IA-32 C compiler generates code which
-# performs ~30% *faster* on P4 CPU than original *hand-coded*
-# SHA1 assembler implementation. To address this problem (and
-# prove that humans are still better than machines:-), the
-# original code was overhauled, which resulted in following
-# performance changes:
-#
-#		compared with original	compared with Intel cc
-#		assembler impl.		generated code
-# Pentium	-16%			+48%
-# PIII/AMD	+8%			+16%
-# P4		+85%(!)			+45%
-#
-# As you can see Pentium came out as looser:-( Yet I reckoned that
-# improvement on P4 outweights the loss and incorporate this
-# re-tuned code to 0.9.7 and later.
-# ----------------------------------------------------------------
-# Those who for any particular reason absolutely must score on
-# Pentium can replace this module with one from 0.9.6 distribution.
-# This "offer" shall be revoked the moment programming interface to
-# this module is changed, in which case this paragraph should be
-# removed.
-# ----------------------------------------------------------------
-#					<appro@fy.chalmers.se>
-
-$normal=0;
-
-push(@INC,"perlasm","../../perlasm");
-require "x86asm.pl";
-
-&asm_init($ARGV[0],"sha1-586.pl",$ARGV[$#ARGV] eq "386");
-
-$A="eax";
-$B="ecx";
-$C="ebx";
-$D="edx";
-$E="edi";
-$T="esi";
-$tmp1="ebp";
-
-$off=9*4;
-
-@K=(0x5a827999,0x6ed9eba1,0x8f1bbcdc,0xca62c1d6);
-
-&sha1_block_data("sha1_block_asm_data_order");
-
-&asm_finish();
-
-sub Nn
-	{
-	local($p)=@_;
-	local(%n)=($A,$T,$B,$A,$C,$B,$D,$C,$E,$D,$T,$E);
-	return($n{$p});
-	}
-
-sub Np
-	{
-	local($p)=@_;
-	local(%n)=($A,$T,$B,$A,$C,$B,$D,$C,$E,$D,$T,$E);
-	local(%n)=($A,$B,$B,$C,$C,$D,$D,$E,$E,$T,$T,$A);
-	return($n{$p});
-	}
-
-sub Na
-	{
-	local($n)=@_;
-	return( (($n   )&0x0f),
-		(($n+ 2)&0x0f),
-		(($n+ 8)&0x0f),
-		(($n+13)&0x0f),
-		(($n+ 1)&0x0f));
-	}
-
-sub X_expand
-	{
-	local($in)=@_;
-
-	&comment("First, load the words onto the stack in network byte order");
-	for ($i=0; $i<16; $i+=2)
-		{
-		&mov($A,&DWP(($i+0)*4,$in,"",0));# unless $i == 0;
-		 &mov($B,&DWP(($i+1)*4,$in,"",0));
-		&bswap($A);
-		 &bswap($B);
-		&mov(&swtmp($i+0),$A);
-		 &mov(&swtmp($i+1),$B);
-		}
-
-	&comment("We now have the X array on the stack");
-	&comment("starting at sp-4");
-	}
-
-# Rules of engagement
-# F is always trashable at the start, the running total.
-# E becomes the next F so it can be trashed after it has been 'accumulated'
-# F becomes A in the next round.  We don't need to access it much.
-# During the X update part, the result ends up in $X[$n0].
-
-sub BODY_00_15
-	{
-	local($pos,$K,$X,$n,$a,$b,$c,$d,$e,$f)=@_;
-
-	&comment("00_15 $n");
-
-	&mov($f,$c);			# f to hold F_00_19(b,c,d)
-	 if ($n==0)  { &mov($tmp1,$a); }
-	 else        { &mov($a,$tmp1); }
-	&rotl($tmp1,5);			# tmp1=ROTATE(a,5)
-	 &xor($f,$d);
-	&and($f,$b);
-	 &add($tmp1,$e);		# tmp1+=e;
-	&mov($e,&swtmp($n));		# e becomes volatile and
-	 				# is loaded with xi
-	 &xor($f,$d);			# f holds F_00_19(b,c,d)
-	&rotr($b,2);			# b=ROTATE(b,30)
-	 &lea($tmp1,&DWP($K,$tmp1,$e,1));# tmp1+=K_00_19+xi
-
-	if ($n==15) { &add($f,$tmp1); }	# f+=tmp1
-	else        { &add($tmp1,$f); }
-	}
-
-sub BODY_16_19
-	{
-	local($pos,$K,$X,$n,$a,$b,$c,$d,$e,$f)=@_;
-	local($n0,$n1,$n2,$n3,$np)=&Na($n);
-
-	&comment("16_19 $n");
-
-	&mov($f,&swtmp($n1));		# f to hold Xupdate(xi,xa,xb,xc,xd)
-	 &mov($tmp1,$c);		# tmp1 to hold F_00_19(b,c,d)
-	&xor($f,&swtmp($n0));
-	 &xor($tmp1,$d);
-	&xor($f,&swtmp($n2));
-	 &and($tmp1,$b);		# tmp1 holds F_00_19(b,c,d)
-	&rotr($b,2);			# b=ROTATE(b,30)
-	 &xor($f,&swtmp($n3));		# f holds xa^xb^xc^xd
-	&rotl($f,1);			# f=ROATE(f,1)
-	 &xor($tmp1,$d);		# tmp1=F_00_19(b,c,d)
-	&mov(&swtmp($n0),$f);		# xi=f
-	&lea($f,&DWP($K,$f,$e,1));	# f+=K_00_19+e
-	 &mov($e,$a);			# e becomes volatile
-	&rotl($e,5);			# e=ROTATE(a,5)
-	 &add($f,$tmp1);		# f+=F_00_19(b,c,d)
-	&add($f,$e);			# f+=ROTATE(a,5)
-	}
-
-sub BODY_20_39
-	{
-	local($pos,$K,$X,$n,$a,$b,$c,$d,$e,$f)=@_;
-
-	&comment("20_39 $n");
-	local($n0,$n1,$n2,$n3,$np)=&Na($n);
-
-	&mov($tmp1,$b);			# tmp1 to hold F_20_39(b,c,d)
-	 &mov($f,&swtmp($n0));		# f to hold Xupdate(xi,xa,xb,xc,xd)
-	&rotr($b,2);			# b=ROTATE(b,30)
-	 &xor($f,&swtmp($n1));
-	&xor($tmp1,$c);
-	 &xor($f,&swtmp($n2));
-	&xor($tmp1,$d);			# tmp1 holds F_20_39(b,c,d)
-	 &xor($f,&swtmp($n3));		# f holds xa^xb^xc^xd
-	&rotl($f,1);			# f=ROTATE(f,1)
-	 &add($tmp1,$e);
-	&mov(&swtmp($n0),$f);		# xi=f
-	 &mov($e,$a);			# e becomes volatile
-	&rotl($e,5);			# e=ROTATE(a,5)
-	 &lea($f,&DWP($K,$f,$tmp1,1));	# f+=K_20_39+e
-	&add($f,$e);			# f+=ROTATE(a,5)
-	}
-
-sub BODY_40_59
-	{
-	local($pos,$K,$X,$n,$a,$b,$c,$d,$e,$f)=@_;
-
-	&comment("40_59 $n");
-	local($n0,$n1,$n2,$n3,$np)=&Na($n);
-
-	&mov($f,&swtmp($n0));		# f to hold Xupdate(xi,xa,xb,xc,xd)
-	 &mov($tmp1,&swtmp($n1));
-	&xor($f,$tmp1);
-	 &mov($tmp1,&swtmp($n2));
-	&xor($f,$tmp1);
-	 &mov($tmp1,&swtmp($n3));
-	&xor($f,$tmp1);			# f holds xa^xb^xc^xd
-	 &mov($tmp1,$b);		# tmp1 to hold F_40_59(b,c,d)
-	&rotl($f,1);			# f=ROTATE(f,1)
-	 &or($tmp1,$c);
-	&mov(&swtmp($n0),$f);		# xi=f
-	 &and($tmp1,$d);
-	&lea($f,&DWP($K,$f,$e,1));	# f+=K_40_59+e
-	 &mov($e,$b);			# e becomes volatile and is used
-					# to calculate F_40_59(b,c,d)
-	&rotr($b,2);			# b=ROTATE(b,30)
-	 &and($e,$c);
-	&or($tmp1,$e);			# tmp1 holds F_40_59(b,c,d)		
-	 &mov($e,$a);
-	&rotl($e,5);			# e=ROTATE(a,5)
-	 &add($f,$tmp1);		# f+=tmp1;
-	&add($f,$e);			# f+=ROTATE(a,5)
-	}
-
-sub BODY_60_79
-	{
-	&BODY_20_39(@_);
-	}
-
-sub sha1_block_host
-	{
-	local($name, $sclabel)=@_;
-
-	&function_begin_B($name,"");
-
-	# parameter 1 is the MD5_CTX structure.
-	# A	0
-	# B	4
-	# C	8
-	# D 	12
-	# E 	16
-
-	&mov("ecx",	&wparam(2));
-	 &push("esi");
-	&shl("ecx",6);
-	 &mov("esi",	&wparam(1));
-	&push("ebp");
-	 &add("ecx","esi");	# offset to leave on
-	&push("ebx");
-	 &mov("ebp",	&wparam(0));
-	&push("edi");
-	 &mov($D,	&DWP(12,"ebp","",0));
-	&stack_push(18+9);
-	 &mov($E,	&DWP(16,"ebp","",0));
-	&mov($C,	&DWP( 8,"ebp","",0));
-	 &mov(&swtmp(17),"ecx");
-
-	&comment("First we need to setup the X array");
-
-	for ($i=0; $i<16; $i+=2)
-		{
-		&mov($A,&DWP(($i+0)*4,"esi","",0));# unless $i == 0;
-		 &mov($B,&DWP(($i+1)*4,"esi","",0));
-		&mov(&swtmp($i+0),$A);
-		 &mov(&swtmp($i+1),$B);
-		}
-	&jmp($sclabel);
-	&function_end_B($name);
-	}
-
-
-sub sha1_block_data
-	{
-	local($name)=@_;
-
-	&function_begin_B($name,"");
-
-	# parameter 1 is the MD5_CTX structure.
-	# A	0
-	# B	4
-	# C	8
-	# D 	12
-	# E 	16
-
-	&mov("ecx",	&wparam(2));
-	 &push("esi");
-	&shl("ecx",6);
-	 &mov("esi",	&wparam(1));
-	&push("ebp");
-	 &add("ecx","esi");	# offset to leave on
-	&push("ebx");
-	 &mov("ebp",	&wparam(0));
-	&push("edi");
-	 &mov($D,	&DWP(12,"ebp","",0));
-	&stack_push(18+9);
-	 &mov($E,	&DWP(16,"ebp","",0));
-	&mov($C,	&DWP( 8,"ebp","",0));
-	 &mov(&swtmp(17),"ecx");
-
-	&comment("First we need to setup the X array");
-
-	&set_label("start") unless $normal;
-
-	&X_expand("esi");
-	 &mov(&wparam(1),"esi");
-
-	&set_label("shortcut", 0, 1);
-	&comment("");
-	&comment("Start processing");
-
-	# odd start
-	&mov($A,	&DWP( 0,"ebp","",0));
-	 &mov($B,	&DWP( 4,"ebp","",0));
-	$X="esp";
-	&BODY_00_15(-2,$K[0],$X, 0,$A,$B,$C,$D,$E,$T);
-	&BODY_00_15( 0,$K[0],$X, 1,$T,$A,$B,$C,$D,$E);
-	&BODY_00_15( 0,$K[0],$X, 2,$E,$T,$A,$B,$C,$D);
-	&BODY_00_15( 0,$K[0],$X, 3,$D,$E,$T,$A,$B,$C);
-	&BODY_00_15( 0,$K[0],$X, 4,$C,$D,$E,$T,$A,$B);
-	&BODY_00_15( 0,$K[0],$X, 5,$B,$C,$D,$E,$T,$A);
-	&BODY_00_15( 0,$K[0],$X, 6,$A,$B,$C,$D,$E,$T);
-	&BODY_00_15( 0,$K[0],$X, 7,$T,$A,$B,$C,$D,$E);
-	&BODY_00_15( 0,$K[0],$X, 8,$E,$T,$A,$B,$C,$D);
-	&BODY_00_15( 0,$K[0],$X, 9,$D,$E,$T,$A,$B,$C);
-	&BODY_00_15( 0,$K[0],$X,10,$C,$D,$E,$T,$A,$B);
-	&BODY_00_15( 0,$K[0],$X,11,$B,$C,$D,$E,$T,$A);
-	&BODY_00_15( 0,$K[0],$X,12,$A,$B,$C,$D,$E,$T);
-	&BODY_00_15( 0,$K[0],$X,13,$T,$A,$B,$C,$D,$E);
-	&BODY_00_15( 0,$K[0],$X,14,$E,$T,$A,$B,$C,$D);
-	&BODY_00_15( 1,$K[0],$X,15,$D,$E,$T,$A,$B,$C);
-	&BODY_16_19(-1,$K[0],$X,16,$C,$D,$E,$T,$A,$B);
-	&BODY_16_19( 0,$K[0],$X,17,$B,$C,$D,$E,$T,$A);
-	&BODY_16_19( 0,$K[0],$X,18,$A,$B,$C,$D,$E,$T);
-	&BODY_16_19( 1,$K[0],$X,19,$T,$A,$B,$C,$D,$E);
-
-	&BODY_20_39(-1,$K[1],$X,20,$E,$T,$A,$B,$C,$D);
-	&BODY_20_39( 0,$K[1],$X,21,$D,$E,$T,$A,$B,$C);
-	&BODY_20_39( 0,$K[1],$X,22,$C,$D,$E,$T,$A,$B);
-	&BODY_20_39( 0,$K[1],$X,23,$B,$C,$D,$E,$T,$A);
-	&BODY_20_39( 0,$K[1],$X,24,$A,$B,$C,$D,$E,$T);
-	&BODY_20_39( 0,$K[1],$X,25,$T,$A,$B,$C,$D,$E);
-	&BODY_20_39( 0,$K[1],$X,26,$E,$T,$A,$B,$C,$D);
-	&BODY_20_39( 0,$K[1],$X,27,$D,$E,$T,$A,$B,$C);
-	&BODY_20_39( 0,$K[1],$X,28,$C,$D,$E,$T,$A,$B);
-	&BODY_20_39( 0,$K[1],$X,29,$B,$C,$D,$E,$T,$A);
-	&BODY_20_39( 0,$K[1],$X,30,$A,$B,$C,$D,$E,$T);
-	&BODY_20_39( 0,$K[1],$X,31,$T,$A,$B,$C,$D,$E);
-	&BODY_20_39( 0,$K[1],$X,32,$E,$T,$A,$B,$C,$D);
-	&BODY_20_39( 0,$K[1],$X,33,$D,$E,$T,$A,$B,$C);
-	&BODY_20_39( 0,$K[1],$X,34,$C,$D,$E,$T,$A,$B);
-	&BODY_20_39( 0,$K[1],$X,35,$B,$C,$D,$E,$T,$A);
-	&BODY_20_39( 0,$K[1],$X,36,$A,$B,$C,$D,$E,$T);
-	&BODY_20_39( 0,$K[1],$X,37,$T,$A,$B,$C,$D,$E);
-	&BODY_20_39( 0,$K[1],$X,38,$E,$T,$A,$B,$C,$D);
-	&BODY_20_39( 1,$K[1],$X,39,$D,$E,$T,$A,$B,$C);
-
-	&BODY_40_59(-1,$K[2],$X,40,$C,$D,$E,$T,$A,$B);
-	&BODY_40_59( 0,$K[2],$X,41,$B,$C,$D,$E,$T,$A);
-	&BODY_40_59( 0,$K[2],$X,42,$A,$B,$C,$D,$E,$T);
-	&BODY_40_59( 0,$K[2],$X,43,$T,$A,$B,$C,$D,$E);
-	&BODY_40_59( 0,$K[2],$X,44,$E,$T,$A,$B,$C,$D);
-	&BODY_40_59( 0,$K[2],$X,45,$D,$E,$T,$A,$B,$C);
-	&BODY_40_59( 0,$K[2],$X,46,$C,$D,$E,$T,$A,$B);
-	&BODY_40_59( 0,$K[2],$X,47,$B,$C,$D,$E,$T,$A);
-	&BODY_40_59( 0,$K[2],$X,48,$A,$B,$C,$D,$E,$T);
-	&BODY_40_59( 0,$K[2],$X,49,$T,$A,$B,$C,$D,$E);
-	&BODY_40_59( 0,$K[2],$X,50,$E,$T,$A,$B,$C,$D);
-	&BODY_40_59( 0,$K[2],$X,51,$D,$E,$T,$A,$B,$C);
-	&BODY_40_59( 0,$K[2],$X,52,$C,$D,$E,$T,$A,$B);
-	&BODY_40_59( 0,$K[2],$X,53,$B,$C,$D,$E,$T,$A);
-	&BODY_40_59( 0,$K[2],$X,54,$A,$B,$C,$D,$E,$T);
-	&BODY_40_59( 0,$K[2],$X,55,$T,$A,$B,$C,$D,$E);
-	&BODY_40_59( 0,$K[2],$X,56,$E,$T,$A,$B,$C,$D);
-	&BODY_40_59( 0,$K[2],$X,57,$D,$E,$T,$A,$B,$C);
-	&BODY_40_59( 0,$K[2],$X,58,$C,$D,$E,$T,$A,$B);
-	&BODY_40_59( 1,$K[2],$X,59,$B,$C,$D,$E,$T,$A);
-
-	&BODY_60_79(-1,$K[3],$X,60,$A,$B,$C,$D,$E,$T);
-	&BODY_60_79( 0,$K[3],$X,61,$T,$A,$B,$C,$D,$E);
-	&BODY_60_79( 0,$K[3],$X,62,$E,$T,$A,$B,$C,$D);
-	&BODY_60_79( 0,$K[3],$X,63,$D,$E,$T,$A,$B,$C);
-	&BODY_60_79( 0,$K[3],$X,64,$C,$D,$E,$T,$A,$B);
-	&BODY_60_79( 0,$K[3],$X,65,$B,$C,$D,$E,$T,$A);
-	&BODY_60_79( 0,$K[3],$X,66,$A,$B,$C,$D,$E,$T);
-	&BODY_60_79( 0,$K[3],$X,67,$T,$A,$B,$C,$D,$E);
-	&BODY_60_79( 0,$K[3],$X,68,$E,$T,$A,$B,$C,$D);
-	&BODY_60_79( 0,$K[3],$X,69,$D,$E,$T,$A,$B,$C);
-	&BODY_60_79( 0,$K[3],$X,70,$C,$D,$E,$T,$A,$B);
-	&BODY_60_79( 0,$K[3],$X,71,$B,$C,$D,$E,$T,$A);
-	&BODY_60_79( 0,$K[3],$X,72,$A,$B,$C,$D,$E,$T);
-	&BODY_60_79( 0,$K[3],$X,73,$T,$A,$B,$C,$D,$E);
-	&BODY_60_79( 0,$K[3],$X,74,$E,$T,$A,$B,$C,$D);
-	&BODY_60_79( 0,$K[3],$X,75,$D,$E,$T,$A,$B,$C);
-	&BODY_60_79( 0,$K[3],$X,76,$C,$D,$E,$T,$A,$B);
-	&BODY_60_79( 0,$K[3],$X,77,$B,$C,$D,$E,$T,$A);
-	&BODY_60_79( 0,$K[3],$X,78,$A,$B,$C,$D,$E,$T);
-	&BODY_60_79( 2,$K[3],$X,79,$T,$A,$B,$C,$D,$E);
-
-	&comment("End processing");
-	&comment("");
-	# D is the tmp value
-
-	# E -> A
-	# T -> B
-	# A -> C
-	# B -> D
-	# C -> E
-	# D -> T
-
-	&mov($tmp1,&wparam(0));
-
-	 &mov($D,	&DWP(12,$tmp1,"",0));
-	&add($D,$B);
-	 &mov($B,	&DWP( 4,$tmp1,"",0));
-	&add($B,$T);
-	 &mov($T,	$A);
-	&mov($A,	&DWP( 0,$tmp1,"",0));
-	 &mov(&DWP(12,$tmp1,"",0),$D);
-
-	&add($A,$E);
-	 &mov($E,	&DWP(16,$tmp1,"",0));
-	&add($E,$C);
-	 &mov($C,	&DWP( 8,$tmp1,"",0));
-	&add($C,$T);
-
-	 &mov(&DWP( 0,$tmp1,"",0),$A);
-	&mov("esi",&wparam(1));
-	 &mov(&DWP( 8,$tmp1,"",0),$C);
- 	&add("esi",64);
-	 &mov("eax",&swtmp(17));
-	&mov(&DWP(16,$tmp1,"",0),$E);
-	 &cmp("esi","eax");
-	&mov(&DWP( 4,$tmp1,"",0),$B);
-	 &jb(&label("start"));
-
-	&stack_pop(18+9);
-	 &pop("edi");
-	&pop("ebx");
-	 &pop("ebp");
-	&pop("esi");
-	 &ret();
-
-	# keep a note of shortcut label so it can be used outside
-	# block.
-	my $sclabel = &label("shortcut");
-
-	&function_end_B($name);
-	# Putting this here avoids problems with MASM in debugging mode
-	&sha1_block_host("sha1_block_asm_host_order", $sclabel);
-	}
-
diff --git a/crypto/openssl/crypto/sha/asm/sha1-ia64.pl b/crypto/openssl/crypto/sha/asm/sha1-ia64.pl
deleted file mode 100644
index cb9dfad1243a..000000000000
--- a/crypto/openssl/crypto/sha/asm/sha1-ia64.pl
+++ /dev/null
@@ -1,549 +0,0 @@
-#!/usr/bin/env perl
-#
-# ====================================================================
-# Written by Andy Polyakov <appro@fy.chalmers.se> for the OpenSSL
-# project. Rights for redistribution and usage in source and binary
-# forms are granted according to the OpenSSL license.
-# ====================================================================
-#
-# Eternal question is what's wrong with compiler generated code? The
-# trick is that it's possible to reduce the number of shifts required
-# to perform rotations by maintaining copy of 32-bit value in upper
-# bits of 64-bit register. Just follow mux2 and shrp instructions...
-# Performance under big-endian OS such as HP-UX is 179MBps*1GHz, which
-# is >50% better than HP C and >2x better than gcc. As of this moment
-# performance under little-endian OS such as Linux and Windows will be
-# a bit lower, because data has to be picked in reverse byte-order.
-# It's possible to resolve this issue by implementing third function,
-# sha1_block_asm_data_order_aligned, which would temporarily flip
-# BE field in User Mask register...
-
-$code=<<___;
-.ident  \"sha1-ia64.s, version 1.0\"
-.ident  \"IA-64 ISA artwork by Andy Polyakov <appro\@fy.chalmers.se>\"
-.explicit
-
-___
-
-
-if ($^O eq "hpux") {
-    $ADDP="addp4";
-    for (@ARGV) { $ADDP="add" if (/[\+DD|\-mlp]64/); }
-} else { $ADDP="add"; }
-for (@ARGV) {	$big_endian=1 if (/\-DB_ENDIAN/);
-		$big_endian=0 if (/\-DL_ENDIAN/);   }
-if (!defined($big_endian))
-	    {	$big_endian=(unpack('L',pack('N',1))==1);   }
-
-#$human=1;
-if ($human) {	# useful for visual code auditing...
-	($A,$B,$C,$D,$E,$T)   = ("A","B","C","D","E","T");
-	($h0,$h1,$h2,$h3,$h4) = ("h0","h1","h2","h3","h4");
-	($K_00_19, $K_20_39, $K_40_59, $K_60_79) =
-	    (	"K_00_19","K_20_39","K_40_59","K_60_79"	);
-	@X= (	"X0", "X1", "X2", "X3", "X4", "X5", "X6", "X7",
-		"X8", "X9","X10","X11","X12","X13","X14","X15"	);
-}
-else {
-	($A,$B,$C,$D,$E,$T)   = ("loc0","loc1","loc2","loc3","loc4","loc5");
-	($h0,$h1,$h2,$h3,$h4) = ("loc6","loc7","loc8","loc9","loc10");
-	($K_00_19, $K_20_39, $K_40_59, $K_60_79) =
-	    (	"r14", "r15", "loc11", "loc12"	);
-	@X= (	"r16", "r17", "r18", "r19", "r20", "r21", "r22", "r23",
-		"r24", "r25", "r26", "r27", "r28", "r29", "r30", "r31"	);
-}
-
-sub BODY_00_15 {
-local	*code=shift;
-local	($i,$a,$b,$c,$d,$e,$f,$unaligned)=@_;
-
-if ($unaligned) {
-	$code.=<<___;
-{ .mmi;	ld1	tmp0=[inp],2		    // MSB
-	ld1	tmp1=[tmp3],2		};;
-{ .mmi;	ld1	tmp2=[inp],2
-	ld1	$X[$i&0xf]=[tmp3],2	    // LSB
-	dep	tmp1=tmp0,tmp1,8,8	};;
-{ .mii;	cmp.ne	p16,p0=r0,r0		    // no misaligned prefetch
-	dep	$X[$i&0xf]=tmp2,$X[$i&0xf],8,8;;
-	dep	$X[$i&0xf]=tmp1,$X[$i&0xf],16,16	};;
-{ .mmi;	nop.m	0
-___
-	}
-elsif ($i<15) {
-	$code.=<<___;
-{ .mmi;	ld4	$X[($i+1)&0xf]=[inp],4	// prefetch
-___
-	}
-else	{
-	$code.=<<___;
-{ .mmi;	nop.m	0
-___
-	}
-if ($i<15) {
-	$code.=<<___;
-	and	tmp0=$c,$b
-	dep.z	tmp5=$a,5,27		}   // a<<5
-{ .mmi;	andcm	tmp1=$d,$b
-	add	tmp4=$e,$K_00_19	};;
-{ .mmi;	or	tmp0=tmp0,tmp1		    // F_00_19(b,c,d)=(b&c)|(~b&d)
-	add	$f=tmp4,$X[$i&0xf]	    // f=xi+e+K_00_19
-	extr.u	tmp1=$a,27,5		};; // a>>27
-{ .mib;	add	$f=$f,tmp0		    // f+=F_00_19(b,c,d)
-	shrp	$b=tmp6,tmp6,2		}   // b=ROTATE(b,30)
-{ .mib;	or	tmp1=tmp1,tmp5		    // ROTATE(a,5)
-	mux2	tmp6=$a,0x44		};; // see b in next iteration
-{ .mii;	add	$f=$f,tmp1		    // f+=ROTATE(a,5)
-	mux2	$X[$i&0xf]=$X[$i&0xf],0x44
-	nop.i	0			};;
-
-___
-	}
-else	{
-	$code.=<<___;
-	and	tmp0=$c,$b
-	dep.z	tmp5=$a,5,27		}   // a<<5 ;;?
-{ .mmi;	andcm	tmp1=$d,$b
-	add	tmp4=$e,$K_00_19	};;
-{ .mmi;	or	tmp0=tmp0,tmp1		    // F_00_19(b,c,d)=(b&c)|(~b&d)
-	add	$f=tmp4,$X[$i&0xf]	    // f=xi+e+K_00_19
-	extr.u	tmp1=$a,27,5		}   // a>>27
-{ .mmi;	xor	tmp2=$X[($i+0+1)&0xf],$X[($i+2+1)&0xf]	// +1
-	xor	tmp3=$X[($i+8+1)&0xf],$X[($i+13+1)&0xf] // +1
-	nop.i	0			};;
-{ .mmi;	add	$f=$f,tmp0		    // f+=F_00_19(b,c,d)
-	xor	tmp2=tmp2,tmp3		    // +1
-	shrp	$b=tmp6,tmp6,2		}   // b=ROTATE(b,30)
-{ .mmi; or	tmp1=tmp1,tmp5		    // ROTATE(a,5)
-	mux2	tmp6=$a,0x44		};; // see b in next iteration
-{ .mii;	add	$f=$f,tmp1		    // f+=ROTATE(a,5)
-	shrp	$e=tmp2,tmp2,31		    // f+1=ROTATE(x[0]^x[2]^x[8]^x[13],1)
-	mux2	$X[$i&0xf]=$X[$i&0xf],0x44  };;
-
-___
-	}
-}
-
-sub BODY_16_19 {
-local	*code=shift;
-local	($i,$a,$b,$c,$d,$e,$f)=@_;
-
-$code.=<<___;
-{ .mmi;	mov	$X[$i&0xf]=$f		    // Xupdate
-	and	tmp0=$c,$b
-	dep.z	tmp5=$a,5,27		}   // a<<5
-{ .mmi;	andcm	tmp1=$d,$b
-	add	tmp4=$e,$K_00_19	};;
-{ .mmi;	or	tmp0=tmp0,tmp1		    // F_00_19(b,c,d)=(b&c)|(~b&d)
-	add	$f=$f,tmp4		    // f+=e+K_00_19
-	extr.u	tmp1=$a,27,5		}   // a>>27
-{ .mmi;	xor	tmp2=$X[($i+0+1)&0xf],$X[($i+2+1)&0xf]	// +1
-	xor	tmp3=$X[($i+8+1)&0xf],$X[($i+13+1)&0xf]	// +1
-	nop.i	0			};;
-{ .mmi;	add	$f=$f,tmp0		    // f+=F_00_19(b,c,d)
-	xor	tmp2=tmp2,tmp3		    // +1
-	shrp	$b=tmp6,tmp6,2		}   // b=ROTATE(b,30)
-{ .mmi;	or	tmp1=tmp1,tmp5		    // ROTATE(a,5)
-	mux2	tmp6=$a,0x44		};; // see b in next iteration
-{ .mii;	add	$f=$f,tmp1		    // f+=ROTATE(a,5)
-	shrp	$e=tmp2,tmp2,31		    // f+1=ROTATE(x[0]^x[2]^x[8]^x[13],1)
-	nop.i	0			};;
-
-___
-}
-
-sub BODY_20_39 {
-local	*code=shift;
-local	($i,$a,$b,$c,$d,$e,$f,$Konst)=@_;
-	$Konst = $K_20_39 if (!defined($Konst));
-
-if ($i<79) {
-$code.=<<___;
-{ .mib;	mov	$X[$i&0xf]=$f		    // Xupdate
-	dep.z	tmp5=$a,5,27		}   // a<<5
-{ .mib;	xor	tmp0=$c,$b
-	add	tmp4=$e,$Konst		};;
-{ .mmi;	xor	tmp0=tmp0,$d		    // F_20_39(b,c,d)=b^c^d
-	add	$f=$f,tmp4		    // f+=e+K_20_39
-	extr.u	tmp1=$a,27,5		}   // a>>27
-{ .mmi;	xor	tmp2=$X[($i+0+1)&0xf],$X[($i+2+1)&0xf]	// +1
-	xor	tmp3=$X[($i+8+1)&0xf],$X[($i+13+1)&0xf]	// +1
-	nop.i	0			};;
-{ .mmi;	add	$f=$f,tmp0		    // f+=F_20_39(b,c,d)
-	xor	tmp2=tmp2,tmp3		    // +1
-	shrp	$b=tmp6,tmp6,2		}   // b=ROTATE(b,30)
-{ .mmi;	or	tmp1=tmp1,tmp5		    // ROTATE(a,5)
-	mux2	tmp6=$a,0x44		};; // see b in next iteration
-{ .mii;	add	$f=$f,tmp1		    // f+=ROTATE(a,5)
-	shrp	$e=tmp2,tmp2,31		    // f+1=ROTATE(x[0]^x[2]^x[8]^x[13],1)
-	nop.i	0			};;
-
-___
-}
-else {
-$code.=<<___;
-{ .mib;	mov	$X[$i&0xf]=$f		    // Xupdate
-	dep.z	tmp5=$a,5,27		}   // a<<5
-{ .mib;	xor	tmp0=$c,$b
-	add	tmp4=$e,$Konst		};;
-{ .mib;	xor	tmp0=tmp0,$d		    // F_20_39(b,c,d)=b^c^d
-	extr.u	tmp1=$a,27,5		}   // a>>27
-{ .mib;	add	$f=$f,tmp4		    // f+=e+K_20_39
-	add	$h1=$h1,$a		};; // wrap up
-{ .mmi;
-(p16)	ld4.s	$X[0]=[inp],4		    // non-faulting prefetch
-	add	$f=$f,tmp0		    // f+=F_20_39(b,c,d)
-	shrp	$b=tmp6,tmp6,2		}   // b=ROTATE(b,30) ;;?
-{ .mmi;	or	tmp1=tmp1,tmp5		    // ROTATE(a,5)
-	add	$h3=$h3,$c		};; // wrap up
-{ .mib;	add	tmp3=1,inp		    // used in unaligned codepath
-	add	$f=$f,tmp1		}   // f+=ROTATE(a,5)
-{ .mib;	add	$h2=$h2,$b		    // wrap up
-	add	$h4=$h4,$d		};; // wrap up
-
-___
-}
-}
-
-sub BODY_40_59 {
-local	*code=shift;
-local	($i,$a,$b,$c,$d,$e,$f)=@_;
-
-$code.=<<___;
-{ .mmi;	mov	$X[$i&0xf]=$f		    // Xupdate
-	and	tmp0=$c,$b
-	dep.z	tmp5=$a,5,27		}   // a<<5
-{ .mmi;	and	tmp1=$d,$b
-	add	tmp4=$e,$K_40_59	};;
-{ .mmi;	or	tmp0=tmp0,tmp1		    // (b&c)|(b&d)
-	add	$f=$f,tmp4		    // f+=e+K_40_59
-	extr.u	tmp1=$a,27,5		}   // a>>27
-{ .mmi;	and	tmp4=$c,$d
-	xor	tmp2=$X[($i+0+1)&0xf],$X[($i+2+1)&0xf]	// +1
-	xor	tmp3=$X[($i+8+1)&0xf],$X[($i+13+1)&0xf]	// +1
-	};;
-{ .mmi;	or	tmp1=tmp1,tmp5		    // ROTATE(a,5)
-	xor	tmp2=tmp2,tmp3		    // +1
-	shrp	$b=tmp6,tmp6,2		}   // b=ROTATE(b,30)
-{ .mmi;	or	tmp0=tmp0,tmp4		    // F_40_59(b,c,d)=(b&c)|(b&d)|(c&d)
-	mux2	tmp6=$a,0x44		};; // see b in next iteration
-{ .mii;	add	$f=$f,tmp0		    // f+=F_40_59(b,c,d)
-	shrp	$e=tmp2,tmp2,31;;	    // f+1=ROTATE(x[0]^x[2]^x[8]^x[13],1)
-	add	$f=$f,tmp1		};; // f+=ROTATE(a,5)
-
-___
-}
-sub BODY_60_79	{ &BODY_20_39(@_,$K_60_79); }
-
-$code.=<<___;
-.text
-
-tmp0=r8;
-tmp1=r9;
-tmp2=r10;
-tmp3=r11;
-ctx=r32;	// in0
-inp=r33;	// in1
-
-// void sha1_block_asm_host_order(SHA_CTX *c,const void *p,size_t num);
-.global	sha1_block_asm_host_order#
-.proc	sha1_block_asm_host_order#
-.align	32
-sha1_block_asm_host_order:
-	.prologue
-	.fframe	0
-	.save	ar.pfs,r0
-	.save	ar.lc,r3
-{ .mmi;	alloc	tmp1=ar.pfs,3,15,0,0
-	$ADDP	tmp0=4,ctx
-	mov	r3=ar.lc		}
-{ .mmi;	$ADDP	ctx=0,ctx
-	$ADDP	inp=0,inp
-	mov	r2=pr			};;
-tmp4=in2;
-tmp5=loc13;
-tmp6=loc14;
-	.body
-{ .mlx;	ld4	$h0=[ctx],8
-	movl	$K_00_19=0x5a827999	}
-{ .mlx;	ld4	$h1=[tmp0],8
-	movl	$K_20_39=0x6ed9eba1	};;
-{ .mlx;	ld4	$h2=[ctx],8
-	movl	$K_40_59=0x8f1bbcdc	}
-{ .mlx;	ld4	$h3=[tmp0]
-	movl	$K_60_79=0xca62c1d6	};;
-{ .mmi;	ld4	$h4=[ctx],-16
-	add	in2=-1,in2		    // adjust num for ar.lc
-	mov	ar.ec=1			};;
-{ .mmi;	ld4	$X[0]=[inp],4		    // prefetch
-	cmp.ne	p16,p0=r0,in2		    // prefecth at loop end
-	mov	ar.lc=in2		};; // brp.loop.imp: too far
-
-.Lhtop:
-{ .mmi;	mov	$A=$h0
-	mov	$B=$h1
-	mux2	tmp6=$h1,0x44		}
-{ .mmi;	mov	$C=$h2
-	mov	$D=$h3
-	mov	$E=$h4			};;
-
-___
-
-	&BODY_00_15(\$code, 0,$A,$B,$C,$D,$E,$T);
-	&BODY_00_15(\$code, 1,$T,$A,$B,$C,$D,$E);
-	&BODY_00_15(\$code, 2,$E,$T,$A,$B,$C,$D);
-	&BODY_00_15(\$code, 3,$D,$E,$T,$A,$B,$C);
-	&BODY_00_15(\$code, 4,$C,$D,$E,$T,$A,$B);
-	&BODY_00_15(\$code, 5,$B,$C,$D,$E,$T,$A);
-	&BODY_00_15(\$code, 6,$A,$B,$C,$D,$E,$T);
-	&BODY_00_15(\$code, 7,$T,$A,$B,$C,$D,$E);
-	&BODY_00_15(\$code, 8,$E,$T,$A,$B,$C,$D);
-	&BODY_00_15(\$code, 9,$D,$E,$T,$A,$B,$C);
-	&BODY_00_15(\$code,10,$C,$D,$E,$T,$A,$B);
-	&BODY_00_15(\$code,11,$B,$C,$D,$E,$T,$A);
-	&BODY_00_15(\$code,12,$A,$B,$C,$D,$E,$T);
-	&BODY_00_15(\$code,13,$T,$A,$B,$C,$D,$E);
-	&BODY_00_15(\$code,14,$E,$T,$A,$B,$C,$D);
-	&BODY_00_15(\$code,15,$D,$E,$T,$A,$B,$C);
-
-	&BODY_16_19(\$code,16,$C,$D,$E,$T,$A,$B);
-	&BODY_16_19(\$code,17,$B,$C,$D,$E,$T,$A);
-	&BODY_16_19(\$code,18,$A,$B,$C,$D,$E,$T);
-	&BODY_16_19(\$code,19,$T,$A,$B,$C,$D,$E);
-
-	&BODY_20_39(\$code,20,$E,$T,$A,$B,$C,$D);
-	&BODY_20_39(\$code,21,$D,$E,$T,$A,$B,$C);
-	&BODY_20_39(\$code,22,$C,$D,$E,$T,$A,$B);
-	&BODY_20_39(\$code,23,$B,$C,$D,$E,$T,$A);
-	&BODY_20_39(\$code,24,$A,$B,$C,$D,$E,$T);
-	&BODY_20_39(\$code,25,$T,$A,$B,$C,$D,$E);
-	&BODY_20_39(\$code,26,$E,$T,$A,$B,$C,$D);
-	&BODY_20_39(\$code,27,$D,$E,$T,$A,$B,$C);
-	&BODY_20_39(\$code,28,$C,$D,$E,$T,$A,$B);
-	&BODY_20_39(\$code,29,$B,$C,$D,$E,$T,$A);
-	&BODY_20_39(\$code,30,$A,$B,$C,$D,$E,$T);
-	&BODY_20_39(\$code,31,$T,$A,$B,$C,$D,$E);
-	&BODY_20_39(\$code,32,$E,$T,$A,$B,$C,$D);
-	&BODY_20_39(\$code,33,$D,$E,$T,$A,$B,$C);
-	&BODY_20_39(\$code,34,$C,$D,$E,$T,$A,$B);
-	&BODY_20_39(\$code,35,$B,$C,$D,$E,$T,$A);
-	&BODY_20_39(\$code,36,$A,$B,$C,$D,$E,$T);
-	&BODY_20_39(\$code,37,$T,$A,$B,$C,$D,$E);
-	&BODY_20_39(\$code,38,$E,$T,$A,$B,$C,$D);
-	&BODY_20_39(\$code,39,$D,$E,$T,$A,$B,$C);
-
-	&BODY_40_59(\$code,40,$C,$D,$E,$T,$A,$B);
-	&BODY_40_59(\$code,41,$B,$C,$D,$E,$T,$A);
-	&BODY_40_59(\$code,42,$A,$B,$C,$D,$E,$T);
-	&BODY_40_59(\$code,43,$T,$A,$B,$C,$D,$E);
-	&BODY_40_59(\$code,44,$E,$T,$A,$B,$C,$D);
-	&BODY_40_59(\$code,45,$D,$E,$T,$A,$B,$C);
-	&BODY_40_59(\$code,46,$C,$D,$E,$T,$A,$B);
-	&BODY_40_59(\$code,47,$B,$C,$D,$E,$T,$A);
-	&BODY_40_59(\$code,48,$A,$B,$C,$D,$E,$T);
-	&BODY_40_59(\$code,49,$T,$A,$B,$C,$D,$E);
-	&BODY_40_59(\$code,50,$E,$T,$A,$B,$C,$D);
-	&BODY_40_59(\$code,51,$D,$E,$T,$A,$B,$C);
-	&BODY_40_59(\$code,52,$C,$D,$E,$T,$A,$B);
-	&BODY_40_59(\$code,53,$B,$C,$D,$E,$T,$A);
-	&BODY_40_59(\$code,54,$A,$B,$C,$D,$E,$T);
-	&BODY_40_59(\$code,55,$T,$A,$B,$C,$D,$E);
-	&BODY_40_59(\$code,56,$E,$T,$A,$B,$C,$D);
-	&BODY_40_59(\$code,57,$D,$E,$T,$A,$B,$C);
-	&BODY_40_59(\$code,58,$C,$D,$E,$T,$A,$B);
-	&BODY_40_59(\$code,59,$B,$C,$D,$E,$T,$A);
-
-	&BODY_60_79(\$code,60,$A,$B,$C,$D,$E,$T);
-	&BODY_60_79(\$code,61,$T,$A,$B,$C,$D,$E);
-	&BODY_60_79(\$code,62,$E,$T,$A,$B,$C,$D);
-	&BODY_60_79(\$code,63,$D,$E,$T,$A,$B,$C);
-	&BODY_60_79(\$code,64,$C,$D,$E,$T,$A,$B);
-	&BODY_60_79(\$code,65,$B,$C,$D,$E,$T,$A);
-	&BODY_60_79(\$code,66,$A,$B,$C,$D,$E,$T);
-	&BODY_60_79(\$code,67,$T,$A,$B,$C,$D,$E);
-	&BODY_60_79(\$code,68,$E,$T,$A,$B,$C,$D);
-	&BODY_60_79(\$code,69,$D,$E,$T,$A,$B,$C);
-	&BODY_60_79(\$code,70,$C,$D,$E,$T,$A,$B);
-	&BODY_60_79(\$code,71,$B,$C,$D,$E,$T,$A);
-	&BODY_60_79(\$code,72,$A,$B,$C,$D,$E,$T);
-	&BODY_60_79(\$code,73,$T,$A,$B,$C,$D,$E);
-	&BODY_60_79(\$code,74,$E,$T,$A,$B,$C,$D);
-	&BODY_60_79(\$code,75,$D,$E,$T,$A,$B,$C);
-	&BODY_60_79(\$code,76,$C,$D,$E,$T,$A,$B);
-	&BODY_60_79(\$code,77,$B,$C,$D,$E,$T,$A);
-	&BODY_60_79(\$code,78,$A,$B,$C,$D,$E,$T);
-	&BODY_60_79(\$code,79,$T,$A,$B,$C,$D,$E);
-
-$code.=<<___;
-{ .mmb;	add	$h0=$h0,$E
-	nop.m	0
-	br.ctop.dptk.many	.Lhtop	};;
-.Lhend:
-{ .mmi;	add	tmp0=4,ctx
-	mov	ar.lc=r3		};;
-{ .mmi;	st4	[ctx]=$h0,8
-	st4	[tmp0]=$h1,8		};;
-{ .mmi;	st4	[ctx]=$h2,8
-	st4	[tmp0]=$h3		};;
-{ .mib;	st4	[ctx]=$h4,-16
-	mov	pr=r2,0x1ffff
-	br.ret.sptk.many	b0	};;
-.endp	sha1_block_asm_host_order#
-___
-
-
-$code.=<<___;
-// void sha1_block_asm_data_order(SHA_CTX *c,const void *p,size_t num);
-.global	sha1_block_asm_data_order#
-.proc	sha1_block_asm_data_order#
-.align	32
-sha1_block_asm_data_order:
-___
-$code.=<<___ if ($big_endian);
-{ .mmi;	and	r2=3,inp				};;
-{ .mib;	cmp.eq	p6,p0=r0,r2
-(p6)	br.dptk.many	sha1_block_asm_host_order	};;
-___
-$code.=<<___;
-	.prologue
-	.fframe	0
-	.save	ar.pfs,r0
-	.save	ar.lc,r3
-{ .mmi;	alloc	tmp1=ar.pfs,3,15,0,0
-	$ADDP	tmp0=4,ctx
-	mov	r3=ar.lc		}
-{ .mmi;	$ADDP	ctx=0,ctx
-	$ADDP	inp=0,inp
-	mov	r2=pr			};;
-tmp4=in2;
-tmp5=loc13;
-tmp6=loc14;
-	.body
-{ .mlx;	ld4	$h0=[ctx],8
-	movl	$K_00_19=0x5a827999	}
-{ .mlx;	ld4	$h1=[tmp0],8
-	movl	$K_20_39=0x6ed9eba1	};;
-{ .mlx;	ld4	$h2=[ctx],8
-	movl	$K_40_59=0x8f1bbcdc	}
-{ .mlx;	ld4	$h3=[tmp0]
-	movl	$K_60_79=0xca62c1d6	};;
-{ .mmi;	ld4	$h4=[ctx],-16
-	add	in2=-1,in2		    // adjust num for ar.lc
-	mov	ar.ec=1			};;
-{ .mmi;	nop.m	0
-	add	tmp3=1,inp
-	mov	ar.lc=in2		};; // brp.loop.imp: too far
-
-.Ldtop:
-{ .mmi;	mov	$A=$h0
-	mov	$B=$h1
-	mux2	tmp6=$h1,0x44		}
-{ .mmi;	mov	$C=$h2
-	mov	$D=$h3
-	mov	$E=$h4			};;
-
-___
-
-	&BODY_00_15(\$code, 0,$A,$B,$C,$D,$E,$T,1);
-	&BODY_00_15(\$code, 1,$T,$A,$B,$C,$D,$E,1);
-	&BODY_00_15(\$code, 2,$E,$T,$A,$B,$C,$D,1);
-	&BODY_00_15(\$code, 3,$D,$E,$T,$A,$B,$C,1);
-	&BODY_00_15(\$code, 4,$C,$D,$E,$T,$A,$B,1);
-	&BODY_00_15(\$code, 5,$B,$C,$D,$E,$T,$A,1);
-	&BODY_00_15(\$code, 6,$A,$B,$C,$D,$E,$T,1);
-	&BODY_00_15(\$code, 7,$T,$A,$B,$C,$D,$E,1);
-	&BODY_00_15(\$code, 8,$E,$T,$A,$B,$C,$D,1);
-	&BODY_00_15(\$code, 9,$D,$E,$T,$A,$B,$C,1);
-	&BODY_00_15(\$code,10,$C,$D,$E,$T,$A,$B,1);
-	&BODY_00_15(\$code,11,$B,$C,$D,$E,$T,$A,1);
-	&BODY_00_15(\$code,12,$A,$B,$C,$D,$E,$T,1);
-	&BODY_00_15(\$code,13,$T,$A,$B,$C,$D,$E,1);
-	&BODY_00_15(\$code,14,$E,$T,$A,$B,$C,$D,1);
-	&BODY_00_15(\$code,15,$D,$E,$T,$A,$B,$C,1);
-
-	&BODY_16_19(\$code,16,$C,$D,$E,$T,$A,$B);
-	&BODY_16_19(\$code,17,$B,$C,$D,$E,$T,$A);
-	&BODY_16_19(\$code,18,$A,$B,$C,$D,$E,$T);
-	&BODY_16_19(\$code,19,$T,$A,$B,$C,$D,$E);
-
-	&BODY_20_39(\$code,20,$E,$T,$A,$B,$C,$D);
-	&BODY_20_39(\$code,21,$D,$E,$T,$A,$B,$C);
-	&BODY_20_39(\$code,22,$C,$D,$E,$T,$A,$B);
-	&BODY_20_39(\$code,23,$B,$C,$D,$E,$T,$A);
-	&BODY_20_39(\$code,24,$A,$B,$C,$D,$E,$T);
-	&BODY_20_39(\$code,25,$T,$A,$B,$C,$D,$E);
-	&BODY_20_39(\$code,26,$E,$T,$A,$B,$C,$D);
-	&BODY_20_39(\$code,27,$D,$E,$T,$A,$B,$C);
-	&BODY_20_39(\$code,28,$C,$D,$E,$T,$A,$B);
-	&BODY_20_39(\$code,29,$B,$C,$D,$E,$T,$A);
-	&BODY_20_39(\$code,30,$A,$B,$C,$D,$E,$T);
-	&BODY_20_39(\$code,31,$T,$A,$B,$C,$D,$E);
-	&BODY_20_39(\$code,32,$E,$T,$A,$B,$C,$D);
-	&BODY_20_39(\$code,33,$D,$E,$T,$A,$B,$C);
-	&BODY_20_39(\$code,34,$C,$D,$E,$T,$A,$B);
-	&BODY_20_39(\$code,35,$B,$C,$D,$E,$T,$A);
-	&BODY_20_39(\$code,36,$A,$B,$C,$D,$E,$T);
-	&BODY_20_39(\$code,37,$T,$A,$B,$C,$D,$E);
-	&BODY_20_39(\$code,38,$E,$T,$A,$B,$C,$D);
-	&BODY_20_39(\$code,39,$D,$E,$T,$A,$B,$C);
-
-	&BODY_40_59(\$code,40,$C,$D,$E,$T,$A,$B);
-	&BODY_40_59(\$code,41,$B,$C,$D,$E,$T,$A);
-	&BODY_40_59(\$code,42,$A,$B,$C,$D,$E,$T);
-	&BODY_40_59(\$code,43,$T,$A,$B,$C,$D,$E);
-	&BODY_40_59(\$code,44,$E,$T,$A,$B,$C,$D);
-	&BODY_40_59(\$code,45,$D,$E,$T,$A,$B,$C);
-	&BODY_40_59(\$code,46,$C,$D,$E,$T,$A,$B);
-	&BODY_40_59(\$code,47,$B,$C,$D,$E,$T,$A);
-	&BODY_40_59(\$code,48,$A,$B,$C,$D,$E,$T);
-	&BODY_40_59(\$code,49,$T,$A,$B,$C,$D,$E);
-	&BODY_40_59(\$code,50,$E,$T,$A,$B,$C,$D);
-	&BODY_40_59(\$code,51,$D,$E,$T,$A,$B,$C);
-	&BODY_40_59(\$code,52,$C,$D,$E,$T,$A,$B);
-	&BODY_40_59(\$code,53,$B,$C,$D,$E,$T,$A);
-	&BODY_40_59(\$code,54,$A,$B,$C,$D,$E,$T);
-	&BODY_40_59(\$code,55,$T,$A,$B,$C,$D,$E);
-	&BODY_40_59(\$code,56,$E,$T,$A,$B,$C,$D);
-	&BODY_40_59(\$code,57,$D,$E,$T,$A,$B,$C);
-	&BODY_40_59(\$code,58,$C,$D,$E,$T,$A,$B);
-	&BODY_40_59(\$code,59,$B,$C,$D,$E,$T,$A);
-
-	&BODY_60_79(\$code,60,$A,$B,$C,$D,$E,$T);
-	&BODY_60_79(\$code,61,$T,$A,$B,$C,$D,$E);
-	&BODY_60_79(\$code,62,$E,$T,$A,$B,$C,$D);
-	&BODY_60_79(\$code,63,$D,$E,$T,$A,$B,$C);
-	&BODY_60_79(\$code,64,$C,$D,$E,$T,$A,$B);
-	&BODY_60_79(\$code,65,$B,$C,$D,$E,$T,$A);
-	&BODY_60_79(\$code,66,$A,$B,$C,$D,$E,$T);
-	&BODY_60_79(\$code,67,$T,$A,$B,$C,$D,$E);
-	&BODY_60_79(\$code,68,$E,$T,$A,$B,$C,$D);
-	&BODY_60_79(\$code,69,$D,$E,$T,$A,$B,$C);
-	&BODY_60_79(\$code,70,$C,$D,$E,$T,$A,$B);
-	&BODY_60_79(\$code,71,$B,$C,$D,$E,$T,$A);
-	&BODY_60_79(\$code,72,$A,$B,$C,$D,$E,$T);
-	&BODY_60_79(\$code,73,$T,$A,$B,$C,$D,$E);
-	&BODY_60_79(\$code,74,$E,$T,$A,$B,$C,$D);
-	&BODY_60_79(\$code,75,$D,$E,$T,$A,$B,$C);
-	&BODY_60_79(\$code,76,$C,$D,$E,$T,$A,$B);
-	&BODY_60_79(\$code,77,$B,$C,$D,$E,$T,$A);
-	&BODY_60_79(\$code,78,$A,$B,$C,$D,$E,$T);
-	&BODY_60_79(\$code,79,$T,$A,$B,$C,$D,$E);
-
-$code.=<<___;
-{ .mmb;	add	$h0=$h0,$E
-	nop.m	0
-	br.ctop.dptk.many	.Ldtop	};;
-.Ldend:
-{ .mmi;	add	tmp0=4,ctx
-	mov	ar.lc=r3		};;
-{ .mmi;	st4	[ctx]=$h0,8
-	st4	[tmp0]=$h1,8		};;
-{ .mmi;	st4	[ctx]=$h2,8
-	st4	[tmp0]=$h3		};;
-{ .mib;	st4	[ctx]=$h4,-16
-	mov	pr=r2,0x1ffff
-	br.ret.sptk.many	b0	};;
-.endp	sha1_block_asm_data_order#
-___
-
-print $code;
diff --git a/crypto/openssl/crypto/sha/asm/sha512-ia64.pl b/crypto/openssl/crypto/sha/asm/sha512-ia64.pl
deleted file mode 100755
index 0aea02399a9b..000000000000
--- a/crypto/openssl/crypto/sha/asm/sha512-ia64.pl
+++ /dev/null
@@ -1,432 +0,0 @@
-#!/usr/bin/env perl
-#
-# ====================================================================
-# Written by Andy Polyakov <appro@fy.chalmers.se> for the OpenSSL
-# project. Rights for redistribution and usage in source and binary
-# forms are granted according to the OpenSSL license.
-# ====================================================================
-#
-# SHA256/512_Transform for Itanium.
-#
-# sha512_block runs in 1003 cycles on Itanium 2, which is almost 50%
-# faster than gcc and >60%(!) faster than code generated by HP-UX
-# compiler (yes, HP-UX is generating slower code, because unlike gcc,
-# it failed to deploy "shift right pair," 'shrp' instruction, which
-# substitutes for 64-bit rotate).
-#
-# 924 cycles long sha256_block outperforms gcc by over factor of 2(!)
-# and HP-UX compiler - by >40% (yes, gcc won sha512_block, but lost
-# this one big time). Note that "formally" 924 is about 100 cycles
-# too much. I mean it's 64 32-bit rounds vs. 80 virtually identical
-# 64-bit ones and 1003*64/80 gives 802. Extra cycles, 2 per round,
-# are spent on extra work to provide for 32-bit rotations. 32-bit
-# rotations are still handled by 'shrp' instruction and for this
-# reason lower 32 bits are deposited to upper half of 64-bit register
-# prior 'shrp' issue. And in order to minimize the amount of such
-# operations, X[16] values are *maintained* with copies of lower
-# halves in upper halves, which is why you'll spot such instructions
-# as custom 'mux2', "parallel 32-bit add," 'padd4' and "parallel
-# 32-bit unsigned right shift," 'pshr4.u' instructions here.
-#
-# Rules of engagement.
-#
-# There is only one integer shifter meaning that if I have two rotate,
-# deposit or extract instructions in adjacent bundles, they shall
-# split [at run-time if they have to]. But note that variable and
-# parallel shifts are performed by multi-media ALU and *are* pairable
-# with rotates [and alike]. On the backside MMALU is rather slow: it
-# takes 2 extra cycles before the result of integer operation is
-# available *to* MMALU and 2(*) extra cycles before the result of MM
-# operation is available "back" *to* integer ALU, not to mention that
-# MMALU itself has 2 cycles latency. However! I explicitly scheduled
-# these MM instructions to avoid MM stalls, so that all these extra
-# latencies get "hidden" in instruction-level parallelism.
-#
-# (*) 2 cycles on Itanium 1 and 1 cycle on Itanium 2. But I schedule
-#     for 2 in order to provide for best *overall* performance,
-#     because on Itanium 1 stall on MM result is accompanied by
-#     pipeline flush, which takes 6 cycles:-(
-#
-# Resulting performance numbers for 900MHz Itanium 2 system:
-#
-# The 'numbers' are in 1000s of bytes per second processed.
-# type     16 bytes    64 bytes   256 bytes  1024 bytes  8192 bytes
-# sha1(*)   6210.14k   20376.30k   52447.83k   85870.05k  105478.12k
-# sha256    7476.45k   20572.05k   41538.34k   56062.29k   62093.18k
-# sha512    4996.56k   20026.28k   47597.20k   85278.79k  111501.31k
-#
-# (*) SHA1 numbers are for HP-UX compiler and are presented purely
-#     for reference purposes. I bet it can improved too...
-#
-# To generate code, pass the file name with either 256 or 512 in its
-# name and compiler flags.
-
-$output=shift;
-
-if ($output =~ /512.*\.[s|asm]/) {
-	$SZ=8;
-	$BITS=8*$SZ;
-	$LDW="ld8";
-	$STW="st8";
-	$ADD="add";
-	$SHRU="shr.u";
-	$TABLE="K512";
-	$func="sha512_block";
-	@Sigma0=(28,34,39);
-	@Sigma1=(14,18,41);
-	@sigma0=(1,  8, 7);
-	@sigma1=(19,61, 6);
-	$rounds=80;
-} elsif ($output =~ /256.*\.[s|asm]/) {
-	$SZ=4;
-	$BITS=8*$SZ;
-	$LDW="ld4";
-	$STW="st4";
-	$ADD="padd4";
-	$SHRU="pshr4.u";
-	$TABLE="K256";
-	$func="sha256_block";
-	@Sigma0=( 2,13,22);
-	@Sigma1=( 6,11,25);
-	@sigma0=( 7,18, 3);
-	@sigma1=(17,19,10);
-	$rounds=64;
-} else { die "nonsense $output"; }
-
-open STDOUT,">$output" || die "can't open $output: $!";
-
-if ($^O eq "hpux") {
-    $ADDP="addp4";
-    for (@ARGV) { $ADDP="add" if (/[\+DD|\-mlp]64/); }
-} else { $ADDP="add"; }
-for (@ARGV)  {	$big_endian=1 if (/\-DB_ENDIAN/);
-		$big_endian=0 if (/\-DL_ENDIAN/);  }
-if (!defined($big_endian))
-             {	$big_endian=(unpack('L',pack('N',1))==1);  }
-
-$code=<<___;
-.ident  \"$output, version 1.0\"
-.ident  \"IA-64 ISA artwork by Andy Polyakov <appro\@fy.chalmers.se>\"
-.explicit
-.text
-
-prsave=r14;
-K=r15;
-A=r16;	B=r17;	C=r18;	D=r19;
-E=r20;	F=r21;	G=r22;	H=r23;
-T1=r24;	T2=r25;
-s0=r26;	s1=r27;	t0=r28;	t1=r29;
-Ktbl=r30;
-ctx=r31;	// 1st arg
-input=r48;	// 2nd arg
-num=r49;	// 3rd arg
-sgm0=r50;	sgm1=r51;	// small constants
-
-// void $func (SHA_CTX *ctx, const void *in,size_t num[,int host])
-.global	$func#
-.proc	$func#
-.align	32
-$func:
-	.prologue
-	.fframe	0
-	.save	ar.pfs,r2
-	.save	ar.lc,r3
-	.save	pr,prsave
-{ .mmi;	alloc	r2=ar.pfs,3,17,0,16
-	$ADDP	ctx=0,r32		// 1st arg
-	mov	r3=ar.lc	}
-{ .mmi;	$ADDP	input=0,r33		// 2nd arg
-	addl	Ktbl=\@ltoff($TABLE#),gp
-	mov	prsave=pr	};;
-
-	.body
-{ .mii;	ld8	Ktbl=[Ktbl]
-	mov	num=r34		};;	// 3rd arg
-
-{ .mib;	add	r8=0*$SZ,ctx
-	add	r9=1*$SZ,ctx
-	brp.loop.imp	.L_first16,.L_first16_ctop
-				}
-{ .mib;	add	r10=2*$SZ,ctx
-	add	r11=3*$SZ,ctx
-	brp.loop.imp	.L_rest,.L_rest_ctop
-				};;
-// load A-H
-{ .mmi;	$LDW	A=[r8],4*$SZ
-	$LDW	B=[r9],4*$SZ
-	mov	sgm0=$sigma0[2]	}
-{ .mmi;	$LDW	C=[r10],4*$SZ
-	$LDW	D=[r11],4*$SZ
-	mov	sgm1=$sigma1[2]	};;
-{ .mmi;	$LDW	E=[r8]
-	$LDW	F=[r9]		}
-{ .mmi;	$LDW	G=[r10]
-	$LDW	H=[r11]
-	cmp.ne	p15,p14=0,r35	};;	// used in sha256_block
-
-.L_outer:
-{ .mii;	mov	ar.lc=15
-	mov	ar.ec=1		};;
-.align	32
-.L_first16:
-.rotr	X[16]
-___
-$t0="t0", $t1="t1", $code.=<<___ if ($BITS==32);
-{ .mib;	(p14)	add	r9=1,input
-	(p14)	add	r10=2,input	}
-{ .mib;	(p14)	add	r11=3,input
-	(p15)	br.dptk.few	.L_host	};;
-{ .mmi;	(p14)	ld1	r8=[input],$SZ
-	(p14)	ld1	r9=[r9]		}
-{ .mmi;	(p14)	ld1	r10=[r10]
-	(p14)	ld1	r11=[r11]	};;
-{ .mii;	(p14)	dep	r9=r8,r9,8,8
-	(p14)	dep	r11=r10,r11,8,8	};;
-{ .mib;	(p14)	dep	X[15]=r9,r11,16,16 };;
-.L_host:
-{ .mib;	(p15)	$LDW	X[15]=[input],$SZ	// X[i]=*input++
-		dep.z	$t1=E,32,32	}
-{ .mib;		$LDW	K=[Ktbl],$SZ
-		zxt4	E=E		};;
-{ .mmi;		or	$t1=$t1,E
-		and	T1=F,E
-		and	T2=A,B		}
-{ .mmi;		andcm	r8=G,E
-		and	r9=A,C
-		mux2	$t0=A,0x44	};;	// copy lower half to upper
-{ .mib;		xor	T1=T1,r8		// T1=((e & f) ^ (~e & g))
-		_rotr	r11=$t1,$Sigma1[0] }	// ROTR(e,14)
-{ .mib;		and	r10=B,C
-		xor	T2=T2,r9	};;
-___
-$t0="A", $t1="E", $code.=<<___ if ($BITS==64);
-{ .mmi;		$LDW	X[15]=[input],$SZ	// X[i]=*input++
-		and	T1=F,E
-		and	T2=A,B		}
-{ .mmi;		$LDW	K=[Ktbl],$SZ
-		andcm	r8=G,E
-		and	r9=A,C		};;
-{ .mmi;		xor	T1=T1,r8		//T1=((e & f) ^ (~e & g))
-		and	r10=B,C
-		_rotr	r11=$t1,$Sigma1[0] }	// ROTR(e,14)
-{ .mmi;		xor	T2=T2,r9
-		mux1	X[15]=X[15],\@rev };;	// eliminated in big-endian
-___
-$code.=<<___;
-{ .mib;		add	T1=T1,H			// T1=Ch(e,f,g)+h
-		_rotr	r8=$t1,$Sigma1[1] }	// ROTR(e,18)
-{ .mib;		xor	T2=T2,r10		// T2=((a & b) ^ (a & c) ^ (b & c))
-		mov	H=G		};;
-{ .mib;		xor	r11=r8,r11
-		_rotr	r9=$t1,$Sigma1[2] }	// ROTR(e,41)
-{ .mib;		mov	G=F
-		mov	F=E		};;
-{ .mib;		xor	r9=r9,r11		// r9=Sigma1(e)
-		_rotr	r10=$t0,$Sigma0[0] }	// ROTR(a,28)
-{ .mib;		add	T1=T1,K			// T1=Ch(e,f,g)+h+K512[i]
-		mov	E=D		};;
-{ .mib;		add	T1=T1,r9		// T1+=Sigma1(e)
-		_rotr	r11=$t0,$Sigma0[1] }	// ROTR(a,34)
-{ .mib;		mov	D=C
-		mov	C=B		};;
-{ .mib;		add	T1=T1,X[15]		// T1+=X[i]
-		_rotr	r8=$t0,$Sigma0[2] }	// ROTR(a,39)
-{ .mib;		xor	r10=r10,r11
-		mux2	X[15]=X[15],0x44 };;	// eliminated in 64-bit
-{ .mmi;		xor	r10=r8,r10		// r10=Sigma0(a)
-		mov	B=A
-		add	A=T1,T2		};;
-.L_first16_ctop:
-{ .mib;		add	E=E,T1
-		add	A=A,r10			// T2=Maj(a,b,c)+Sigma0(a)
-	br.ctop.sptk	.L_first16	};;
-
-{ .mib;	mov	ar.lc=$rounds-17	}
-{ .mib;	mov	ar.ec=1			};;
-.align	32
-.L_rest:
-.rotr	X[16]
-{ .mib;		$LDW	K=[Ktbl],$SZ
-		_rotr	r8=X[15-1],$sigma0[0] }	// ROTR(s0,1)
-{ .mib; 	$ADD	X[15]=X[15],X[15-9]	// X[i&0xF]+=X[(i+9)&0xF]
-		$SHRU	s0=X[15-1],sgm0	};;	// s0=X[(i+1)&0xF]>>7
-{ .mib;		and	T1=F,E
-		_rotr	r9=X[15-1],$sigma0[1] }	// ROTR(s0,8)
-{ .mib;		andcm	r10=G,E
-		$SHRU	s1=X[15-14],sgm1 };;	// s1=X[(i+14)&0xF]>>6
-{ .mmi;		xor	T1=T1,r10		// T1=((e & f) ^ (~e & g))
-		xor	r9=r8,r9
-		_rotr	r10=X[15-14],$sigma1[0] };;// ROTR(s1,19)
-{ .mib;		and	T2=A,B		
-		_rotr	r11=X[15-14],$sigma1[1] }// ROTR(s1,61)
-{ .mib;		and	r8=A,C		};;
-___
-$t0="t0", $t1="t1", $code.=<<___ if ($BITS==32);
-// I adhere to mmi; in order to hold Itanium 1 back and avoid 6 cycle
-// pipeline flush in last bundle. Note that even on Itanium2 the
-// latter stalls for one clock cycle...
-{ .mmi;		xor	s0=s0,r9		// s0=sigma0(X[(i+1)&0xF])
-		dep.z	$t1=E,32,32	}
-{ .mmi;		xor	r10=r11,r10
-		zxt4	E=E		};;
-{ .mmi;		or	$t1=$t1,E
-		xor	s1=s1,r10		// s1=sigma1(X[(i+14)&0xF])
-		mux2	$t0=A,0x44	};;	// copy lower half to upper
-{ .mmi;		xor	T2=T2,r8
-		_rotr	r9=$t1,$Sigma1[0] }	// ROTR(e,14)
-{ .mmi;		and	r10=B,C
-		add	T1=T1,H			// T1=Ch(e,f,g)+h
-		$ADD	X[15]=X[15],s0	};;	// X[i&0xF]+=sigma0(X[(i+1)&0xF])
-___
-$t0="A", $t1="E", $code.=<<___ if ($BITS==64);
-{ .mib;		xor	s0=s0,r9		// s0=sigma0(X[(i+1)&0xF])
-		_rotr	r9=$t1,$Sigma1[0] }	// ROTR(e,14)
-{ .mib;		xor	r10=r11,r10
-		xor	T2=T2,r8	};;
-{ .mib;		xor	s1=s1,r10		// s1=sigma1(X[(i+14)&0xF])
-		add	T1=T1,H		}
-{ .mib;		and	r10=B,C
-		$ADD	X[15]=X[15],s0	};;	// X[i&0xF]+=sigma0(X[(i+1)&0xF])
-___
-$code.=<<___;
-{ .mmi;		xor	T2=T2,r10		// T2=((a & b) ^ (a & c) ^ (b & c))
-		mov	H=G
-		_rotr	r8=$t1,$Sigma1[1] };;	// ROTR(e,18)
-{ .mmi;		xor	r11=r8,r9
-		$ADD	X[15]=X[15],s1		// X[i&0xF]+=sigma1(X[(i+14)&0xF])
-		_rotr	r9=$t1,$Sigma1[2] }	// ROTR(e,41)
-{ .mmi;		mov	G=F
-		mov	F=E		};;
-{ .mib;		xor	r9=r9,r11		// r9=Sigma1(e)
-		_rotr	r10=$t0,$Sigma0[0] }	// ROTR(a,28)
-{ .mib;		add	T1=T1,K			// T1=Ch(e,f,g)+h+K512[i]
-		mov	E=D		};;
-{ .mib;		add	T1=T1,r9		// T1+=Sigma1(e)
-		_rotr	r11=$t0,$Sigma0[1] }	// ROTR(a,34)
-{ .mib;		mov	D=C
-		mov	C=B		};;
-{ .mmi;		add	T1=T1,X[15]		// T1+=X[i]
-		xor	r10=r10,r11
-		_rotr	r8=$t0,$Sigma0[2] };;	// ROTR(a,39)
-{ .mmi;		xor	r10=r8,r10		// r10=Sigma0(a)
-		mov	B=A
-		add	A=T1,T2		};;
-.L_rest_ctop:
-{ .mib;		add	E=E,T1
-		add	A=A,r10			// T2=Maj(a,b,c)+Sigma0(a)
-	br.ctop.sptk	.L_rest	};;
-
-{ .mib;	add	r8=0*$SZ,ctx
-	add	r9=1*$SZ,ctx		}
-{ .mib;	add	r10=2*$SZ,ctx
-	add	r11=3*$SZ,ctx		};;
-{ .mmi;	$LDW	r32=[r8],4*$SZ
-	$LDW	r33=[r9],4*$SZ		}
-{ .mmi;	$LDW	r34=[r10],4*$SZ
-	$LDW	r35=[r11],4*$SZ
-	cmp.ltu	p6,p7=1,num		};;
-{ .mmi;	$LDW	r36=[r8],-4*$SZ
-	$LDW	r37=[r9],-4*$SZ
-(p6)	add	Ktbl=-$SZ*$rounds,Ktbl	}
-{ .mmi;	$LDW	r38=[r10],-4*$SZ
-	$LDW	r39=[r11],-4*$SZ
-(p7)	mov	ar.lc=r3		};;
-{ .mmi;	add	A=A,r32
-	add	B=B,r33
-	add	C=C,r34			}
-{ .mmi;	add	D=D,r35
-	add	E=E,r36
-	add	F=F,r37			};;
-{ .mmi;	$STW	[r8]=A,4*$SZ
-	$STW	[r9]=B,4*$SZ
-	add	G=G,r38			}
-{ .mmi;	$STW	[r10]=C,4*$SZ
-	$STW	[r11]=D,4*$SZ
-	add	H=H,r39			};;
-{ .mmi;	$STW	[r8]=E
-	$STW	[r9]=F
-(p6)	add	num=-1,num		}
-{ .mmb;	$STW	[r10]=G
-	$STW	[r11]=H
-(p6)	br.dptk.many	.L_outer	};;
-
-{ .mib;	mov	pr=prsave,0x1ffff
-	br.ret.sptk.many	b0	};;
-.endp	$func#
-___
-
-$code =~ s/\`([^\`]*)\`/eval $1/gem;
-$code =~ s/_rotr(\s+)([^=]+)=([^,]+),([0-9]+)/shrp$1$2=$3,$3,$4/gm;
-if ($BITS==64) {
-    $code =~ s/mux2(\s+)\S+/nop.i$1 0x0/gm;
-    $code =~ s/mux1(\s+)\S+/nop.i$1 0x0/gm if ($big_endian);
-}
-
-print $code;
-
-print<<___ if ($BITS==32);
-.align	64
-.type	K256#,\@object
-K256:	data4	0x428a2f98,0x71374491,0xb5c0fbcf,0xe9b5dba5
-	data4	0x3956c25b,0x59f111f1,0x923f82a4,0xab1c5ed5
-	data4	0xd807aa98,0x12835b01,0x243185be,0x550c7dc3
-	data4	0x72be5d74,0x80deb1fe,0x9bdc06a7,0xc19bf174
-	data4	0xe49b69c1,0xefbe4786,0x0fc19dc6,0x240ca1cc
-	data4	0x2de92c6f,0x4a7484aa,0x5cb0a9dc,0x76f988da
-	data4	0x983e5152,0xa831c66d,0xb00327c8,0xbf597fc7
-	data4	0xc6e00bf3,0xd5a79147,0x06ca6351,0x14292967
-	data4	0x27b70a85,0x2e1b2138,0x4d2c6dfc,0x53380d13
-	data4	0x650a7354,0x766a0abb,0x81c2c92e,0x92722c85
-	data4	0xa2bfe8a1,0xa81a664b,0xc24b8b70,0xc76c51a3
-	data4	0xd192e819,0xd6990624,0xf40e3585,0x106aa070
-	data4	0x19a4c116,0x1e376c08,0x2748774c,0x34b0bcb5
-	data4	0x391c0cb3,0x4ed8aa4a,0x5b9cca4f,0x682e6ff3
-	data4	0x748f82ee,0x78a5636f,0x84c87814,0x8cc70208
-	data4	0x90befffa,0xa4506ceb,0xbef9a3f7,0xc67178f2
-.size	K256#,$SZ*$rounds
-___
-print<<___ if ($BITS==64);
-.align	64
-.type	K512#,\@object
-K512:	data8	0x428a2f98d728ae22,0x7137449123ef65cd
-	data8	0xb5c0fbcfec4d3b2f,0xe9b5dba58189dbbc
-	data8	0x3956c25bf348b538,0x59f111f1b605d019
-	data8	0x923f82a4af194f9b,0xab1c5ed5da6d8118
-	data8	0xd807aa98a3030242,0x12835b0145706fbe
-	data8	0x243185be4ee4b28c,0x550c7dc3d5ffb4e2
-	data8	0x72be5d74f27b896f,0x80deb1fe3b1696b1
-	data8	0x9bdc06a725c71235,0xc19bf174cf692694
-	data8	0xe49b69c19ef14ad2,0xefbe4786384f25e3
-	data8	0x0fc19dc68b8cd5b5,0x240ca1cc77ac9c65
-	data8	0x2de92c6f592b0275,0x4a7484aa6ea6e483
-	data8	0x5cb0a9dcbd41fbd4,0x76f988da831153b5
-	data8	0x983e5152ee66dfab,0xa831c66d2db43210
-	data8	0xb00327c898fb213f,0xbf597fc7beef0ee4
-	data8	0xc6e00bf33da88fc2,0xd5a79147930aa725
-	data8	0x06ca6351e003826f,0x142929670a0e6e70
-	data8	0x27b70a8546d22ffc,0x2e1b21385c26c926
-	data8	0x4d2c6dfc5ac42aed,0x53380d139d95b3df
-	data8	0x650a73548baf63de,0x766a0abb3c77b2a8
-	data8	0x81c2c92e47edaee6,0x92722c851482353b
-	data8	0xa2bfe8a14cf10364,0xa81a664bbc423001
-	data8	0xc24b8b70d0f89791,0xc76c51a30654be30
-	data8	0xd192e819d6ef5218,0xd69906245565a910
-	data8	0xf40e35855771202a,0x106aa07032bbd1b8
-	data8	0x19a4c116b8d2d0c8,0x1e376c085141ab53
-	data8	0x2748774cdf8eeb99,0x34b0bcb5e19b48a8
-	data8	0x391c0cb3c5c95a63,0x4ed8aa4ae3418acb
-	data8	0x5b9cca4f7763e373,0x682e6ff3d6b2b8a3
-	data8	0x748f82ee5defb2fc,0x78a5636f43172f60
-	data8	0x84c87814a1f0ab72,0x8cc702081a6439ec
-	data8	0x90befffa23631e28,0xa4506cebde82bde9
-	data8	0xbef9a3f7b2c67915,0xc67178f2e372532b
-	data8	0xca273eceea26619c,0xd186b8c721c0c207
-	data8	0xeada7dd6cde0eb1e,0xf57d4f7fee6ed178
-	data8	0x06f067aa72176fba,0x0a637dc5a2c898a6
-	data8	0x113f9804bef90dae,0x1b710b35131c471b
-	data8	0x28db77f523047d84,0x32caab7b40c72493
-	data8	0x3c9ebe0a15c9bebc,0x431d67c49c100d4c
-	data8	0x4cc5d4becb3e42b6,0x597f299cfc657e2a
-	data8	0x5fcb6fab3ad6faec,0x6c44198c4a475817
-.size	K512#,$SZ*$rounds
-___
diff --git a/crypto/openssl/crypto/sha/asm/sha512-sse2.pl b/crypto/openssl/crypto/sha/asm/sha512-sse2.pl
deleted file mode 100644
index 10902bf673d5..000000000000
--- a/crypto/openssl/crypto/sha/asm/sha512-sse2.pl
+++ /dev/null
@@ -1,404 +0,0 @@
-#!/usr/bin/env perl
-#
-# ====================================================================
-# Written by Andy Polyakov <appro@fy.chalmers.se> for the OpenSSL
-# project. Rights for redistribution and usage in source and binary
-# forms are granted according to the OpenSSL license.
-# ====================================================================
-#
-# SHA512_Transform_SSE2.
-#
-# As the name suggests, this is an IA-32 SSE2 implementation of
-# SHA512_Transform. Motivating factor for the undertaken effort was that
-# SHA512 was observed to *consistently* perform *significantly* poorer
-# than SHA256 [2x and slower is common] on 32-bit platforms. On 64-bit
-# platforms on the other hand SHA512 tend to outperform SHA256 [~50%
-# seem to be common improvement factor]. All this is perfectly natural,
-# as SHA512 is a 64-bit algorithm. But isn't IA-32 SSE2 essentially
-# a 64-bit instruction set? Is it rich enough to implement SHA512?
-# If answer was "no," then you wouldn't have been reading this...
-#
-# Throughput performance in MBps (larger is better):
-#
-#		2.4GHz P4	1.4GHz AMD32	1.4GHz AMD64(*)
-# SHA256/gcc(*)	54		43		59
-# SHA512/gcc	17		23		92
-# SHA512/sse2	61(**)		57(**)
-# SHA512/icc	26		28
-# SHA256/icc(*)	65		54
-#
-# (*)	AMD64 and SHA256 numbers are presented mostly for amusement or
-#	reference purposes.
-# (**)	I.e. it gives ~2-3x speed-up if compared with compiler generated
-#	code. One can argue that hand-coded *non*-SSE2 implementation
-#	would perform better than compiler generated one as well, and
-#	that comparison is therefore not exactly fair. Well, as SHA512
-#	puts enormous pressure on IA-32 GP register bank, I reckon that
-#	hand-coded version wouldn't perform significantly better than
-#	one compiled with icc, ~20% perhaps... So that this code would
-#	still outperform it with distinguishing marginal. But feel free
-#	to prove me wrong:-)
-#						<appro@fy.chalmers.se>
-push(@INC,"perlasm","../../perlasm");
-require "x86asm.pl";
-
-&asm_init($ARGV[0],"sha512-sse2.pl",$ARGV[$#ARGV] eq "386");
-
-$K512="esi";	# K512[80] table, found at the end...
-#$W512="esp";	# $W512 is not just W512[16]: it comprises *two* copies
-		# of W512[16] and a copy of A-H variables...
-$W512_SZ=8*(16+16+8);	# see above...
-#$Kidx="ebx";	# index in K512 table, advances from 0 to 80...
-$Widx="edx";	# index in W512, wraps around at 16...
-$data="edi";	# 16 qwords of input data...
-$A="mm0";	# B-D and
-$E="mm1";	# F-H are allocated dynamically...
-$Aoff=256+0;	# A-H offsets relative to $W512...
-$Boff=256+8;
-$Coff=256+16;
-$Doff=256+24;
-$Eoff=256+32;
-$Foff=256+40;
-$Goff=256+48;
-$Hoff=256+56;
-
-sub SHA2_ROUND()
-{ local ($kidx,$widx)=@_;
-
-	# One can argue that one could reorder instructions for better
-	# performance. Well, I tried and it doesn't seem to make any
-	# noticeable difference. Modern out-of-order execution cores
-	# reorder instructions to their liking in either case and they
-	# apparently do decent job. So we can keep the code more
-	# readable/regular/comprehensible:-)
-
-	# I adhere to 64-bit %mmX registers in order to avoid/not care
-	# about #GP exceptions on misaligned 128-bit access, most
-	# notably in paddq with memory operand. Not to mention that
-	# SSE2 intructions operating on %mmX can be scheduled every
-	# cycle [and not every second one if operating on %xmmN].
-
-	&movq	("mm4",&QWP($Foff,$W512));	# load f
-	&movq	("mm5",&QWP($Goff,$W512));	# load g
-	&movq	("mm6",&QWP($Hoff,$W512));	# load h
-
-	&movq	("mm2",$E);			# %mm2 is sliding right
-	&movq	("mm3",$E);			# %mm3 is sliding left
-	&psrlq	("mm2",14);
-	&psllq	("mm3",23);
-	&movq	("mm7","mm2");			# %mm7 is T1
-	&pxor	("mm7","mm3");
-	&psrlq	("mm2",4);
-	&psllq	("mm3",23);
-	&pxor	("mm7","mm2");
-	&pxor	("mm7","mm3");
-	&psrlq	("mm2",23);
-	&psllq	("mm3",4);
-	&pxor	("mm7","mm2");
-	&pxor	("mm7","mm3");			# T1=Sigma1_512(e)
-
-	&movq	(&QWP($Foff,$W512),$E);		# f = e
-	&movq	(&QWP($Goff,$W512),"mm4");	# g = f
-	&movq	(&QWP($Hoff,$W512),"mm5");	# h = g
-
-	&pxor	("mm4","mm5");			# f^=g
-	&pand	("mm4",$E);			# f&=e
-	&pxor	("mm4","mm5");			# f^=g
-	&paddq	("mm7","mm4");			# T1+=Ch(e,f,g)
-
-	&movq	("mm2",&QWP($Boff,$W512));	# load b
-	&movq	("mm3",&QWP($Coff,$W512));	# load c
-	&movq	($E,&QWP($Doff,$W512));		# e = d
-
-	&paddq	("mm7","mm6");			# T1+=h
-	&paddq	("mm7",&QWP(0,$K512,$kidx,8));	# T1+=K512[i]
-	&paddq	("mm7",&QWP(0,$W512,$widx,8));	# T1+=W512[i]
-	&paddq	($E,"mm7");			# e += T1
-
-	&movq	("mm4",$A);			# %mm4 is sliding right
-	&movq	("mm5",$A);			# %mm5 is sliding left
-	&psrlq	("mm4",28);
-	&psllq	("mm5",25);
-	&movq	("mm6","mm4");			# %mm6 is T2
-	&pxor	("mm6","mm5");
-	&psrlq	("mm4",6);
-	&psllq	("mm5",5);
-	&pxor	("mm6","mm4");
-	&pxor	("mm6","mm5");
-	&psrlq	("mm4",5);
-	&psllq	("mm5",6);
-	&pxor	("mm6","mm4");
-	&pxor	("mm6","mm5");			# T2=Sigma0_512(a)
-
-	&movq	(&QWP($Boff,$W512),$A);		# b = a
-	&movq	(&QWP($Coff,$W512),"mm2");	# c = b
-	&movq	(&QWP($Doff,$W512),"mm3");	# d = c
-
-	&movq	("mm4",$A);			# %mm4=a
-	&por	($A,"mm3");			# a=a|c
-	&pand	("mm4","mm3");			# %mm4=a&c
-	&pand	($A,"mm2");			# a=(a|c)&b
-	&por	("mm4",$A);			# %mm4=(a&c)|((a|c)&b)
-	&paddq	("mm6","mm4");			# T2+=Maj(a,b,c)
-
-	&movq	($A,"mm7");			# a=T1
-	&paddq	($A,"mm6");			# a+=T2
-}
-
-$func="sha512_block_sse2";
-
-&function_begin_B($func);
-	if (0) {# Caller is expected to check if it's appropriate to
-		# call this routine. Below 3 lines are retained for
-		# debugging purposes...
-		&picmeup("eax","OPENSSL_ia32cap");
-		&bt	(&DWP(0,"eax"),26);
-		&jnc	("SHA512_Transform");
-	}
-
-	&push	("ebp");
-	&mov	("ebp","esp");
-	&push	("ebx");
-	&push	("esi");
-	&push	("edi");
-
-	&mov	($Widx,&DWP(8,"ebp"));		# A-H state, 1st arg
-	&mov	($data,&DWP(12,"ebp"));		# input data, 2nd arg
-	&call	(&label("pic_point"));		# make it PIC!
-&set_label("pic_point");
-	&blindpop($K512);
-	&lea	($K512,&DWP(&label("K512")."-".&label("pic_point"),$K512));
-
-	$W512 = "esp";			# start using %esp as W512
-	&sub	($W512,$W512_SZ);
-	&and	($W512,-16);		# ensure 128-bit alignment
-
-	# make private copy of A-H
-	#     v assume the worst and stick to unaligned load
-	&movdqu	("xmm0",&QWP(0,$Widx));
-	&movdqu	("xmm1",&QWP(16,$Widx));
-	&movdqu	("xmm2",&QWP(32,$Widx));
-	&movdqu	("xmm3",&QWP(48,$Widx));
-
-&align(8);
-&set_label("_chunk_loop");
-
-	&movdqa	(&QWP($Aoff,$W512),"xmm0");	# a,b
-	&movdqa	(&QWP($Coff,$W512),"xmm1");	# c,d
-	&movdqa	(&QWP($Eoff,$W512),"xmm2");	# e,f
-	&movdqa	(&QWP($Goff,$W512),"xmm3");	# g,h
-
-	&xor	($Widx,$Widx);
-
-	&movdq2q($A,"xmm0");			# load a
-	&movdq2q($E,"xmm2");			# load e
-
-	# Why aren't loops unrolled? It makes sense to unroll if
-	# execution time for loop body is comparable with branch
-	# penalties and/or if whole data-set resides in register bank.
-	# Neither is case here... Well, it would be possible to
-	# eliminate few store operations, but it would hardly affect
-	# so to say stop-watch performance, as there is a lot of
-	# available memory slots to fill. It will only relieve some
-	# pressure off memory bus...
-
-	# flip input stream byte order...
-	&mov	("eax",&DWP(0,$data,$Widx,8));
-	&mov	("ebx",&DWP(4,$data,$Widx,8));
-	&bswap	("eax");
-	&bswap	("ebx");
-	&mov	(&DWP(0,$W512,$Widx,8),"ebx");		# W512[i]
-	&mov	(&DWP(4,$W512,$Widx,8),"eax");
-	&mov	(&DWP(128+0,$W512,$Widx,8),"ebx");	# copy of W512[i]
-	&mov	(&DWP(128+4,$W512,$Widx,8),"eax");
-
-&align(8);
-&set_label("_1st_loop");		# 0-15
-	# flip input stream byte order...
-	&mov	("eax",&DWP(0+8,$data,$Widx,8));
-	&mov	("ebx",&DWP(4+8,$data,$Widx,8));
-	&bswap	("eax");
-	&bswap	("ebx");
-	&mov	(&DWP(0+8,$W512,$Widx,8),"ebx");	# W512[i]
-	&mov	(&DWP(4+8,$W512,$Widx,8),"eax");
-	&mov	(&DWP(128+0+8,$W512,$Widx,8),"ebx");	# copy of W512[i]
-	&mov	(&DWP(128+4+8,$W512,$Widx,8),"eax");
-&set_label("_1st_looplet");
-	&SHA2_ROUND($Widx,$Widx); &inc($Widx);
-
-&cmp	($Widx,15)
-&jl	(&label("_1st_loop"));
-&je	(&label("_1st_looplet"));	# playing similar trick on 2nd loop
-					# does not improve performance...
-
-	$Kidx = "ebx";			# start using %ebx as Kidx
-	&mov	($Kidx,$Widx);
-
-&align(8);
-&set_label("_2nd_loop");		# 16-79
-	&and($Widx,0xf);
-
-	# 128-bit fragment! I update W512[i] and W512[i+1] in
-	# parallel:-) Note that I refer to W512[(i&0xf)+N] and not to
-	# W512[(i+N)&0xf]! This is exactly what I maintain the second
-	# copy of W512[16] for...
-	&movdqu	("xmm0",&QWP(8*1,$W512,$Widx,8));	# s0=W512[i+1]
-	&movdqa	("xmm2","xmm0");		# %xmm2 is sliding right
-	&movdqa	("xmm3","xmm0");		# %xmm3 is sliding left
-	&psrlq	("xmm2",1);
-	&psllq	("xmm3",56);
-	&movdqa	("xmm0","xmm2");
-	&pxor	("xmm0","xmm3");
-	&psrlq	("xmm2",6);
-	&psllq	("xmm3",7);
-	&pxor	("xmm0","xmm2");
-	&pxor	("xmm0","xmm3");
-	&psrlq	("xmm2",1);
-	&pxor	("xmm0","xmm2");		# s0 = sigma0_512(s0);
-
-	&movdqa	("xmm1",&QWP(8*14,$W512,$Widx,8));	# s1=W512[i+14]
-	&movdqa	("xmm4","xmm1");		# %xmm4 is sliding right
-	&movdqa	("xmm5","xmm1");		# %xmm5 is sliding left
-	&psrlq	("xmm4",6);
-	&psllq	("xmm5",3);
-	&movdqa	("xmm1","xmm4");
-	&pxor	("xmm1","xmm5");
-	&psrlq	("xmm4",13);
-	&psllq	("xmm5",42);
-	&pxor	("xmm1","xmm4");
-	&pxor	("xmm1","xmm5");
-	&psrlq	("xmm4",42);
-	&pxor	("xmm1","xmm4");		# s1 = sigma1_512(s1);
-
-	#     + have to explictly load W512[i+9] as it's not 128-bit
-	#     v	aligned and paddq would throw an exception...
-	&movdqu	("xmm6",&QWP(8*9,$W512,$Widx,8));
-	&paddq	("xmm0","xmm1");		# s0 += s1
-	&paddq	("xmm0","xmm6");		# s0 += W512[i+9]
-	&paddq	("xmm0",&QWP(0,$W512,$Widx,8));	# s0 += W512[i]
-
-	&movdqa	(&QWP(0,$W512,$Widx,8),"xmm0");		# W512[i] = s0
-	&movdqa	(&QWP(16*8,$W512,$Widx,8),"xmm0");	# copy of W512[i]
-
-	# as the above fragment was 128-bit, we "owe" 2 rounds...
-	&SHA2_ROUND($Kidx,$Widx); &inc($Kidx); &inc($Widx);
-	&SHA2_ROUND($Kidx,$Widx); &inc($Kidx); &inc($Widx);
-
-&cmp	($Kidx,80);
-&jl	(&label("_2nd_loop"));
-
-	# update A-H state
-	&mov	($Widx,&DWP(8,"ebp"));		# A-H state, 1st arg
-	&movq	(&QWP($Aoff,$W512),$A);		# write out a
-	&movq	(&QWP($Eoff,$W512),$E);		# write out e
-	&movdqu	("xmm0",&QWP(0,$Widx));
-	&movdqu	("xmm1",&QWP(16,$Widx));
-	&movdqu	("xmm2",&QWP(32,$Widx));
-	&movdqu	("xmm3",&QWP(48,$Widx));
-	&paddq	("xmm0",&QWP($Aoff,$W512));	# 128-bit additions...
-	&paddq	("xmm1",&QWP($Coff,$W512));
-	&paddq	("xmm2",&QWP($Eoff,$W512));
-	&paddq	("xmm3",&QWP($Goff,$W512));
-	&movdqu	(&QWP(0,$Widx),"xmm0");
-	&movdqu	(&QWP(16,$Widx),"xmm1");
-	&movdqu	(&QWP(32,$Widx),"xmm2");
-	&movdqu	(&QWP(48,$Widx),"xmm3");
-
-&add	($data,16*8);				# advance input data pointer
-&dec	(&DWP(16,"ebp"));			# decrement 3rd arg
-&jnz	(&label("_chunk_loop"));
-
-	# epilogue
-	&emms	();	# required for at least ELF and Win32 ABIs
-	&mov	("edi",&DWP(-12,"ebp"));
-	&mov	("esi",&DWP(-8,"ebp"));
-	&mov	("ebx",&DWP(-4,"ebp"));
-	&leave	();
-&ret	();
-
-&align(64);
-&set_label("K512");	# Yes! I keep it in the code segment!
-	&data_word(0xd728ae22,0x428a2f98);	# u64
-	&data_word(0x23ef65cd,0x71374491);	# u64
-	&data_word(0xec4d3b2f,0xb5c0fbcf);	# u64
-	&data_word(0x8189dbbc,0xe9b5dba5);	# u64
-	&data_word(0xf348b538,0x3956c25b);	# u64
-	&data_word(0xb605d019,0x59f111f1);	# u64
-	&data_word(0xaf194f9b,0x923f82a4);	# u64
-	&data_word(0xda6d8118,0xab1c5ed5);	# u64
-	&data_word(0xa3030242,0xd807aa98);	# u64
-	&data_word(0x45706fbe,0x12835b01);	# u64
-	&data_word(0x4ee4b28c,0x243185be);	# u64
-	&data_word(0xd5ffb4e2,0x550c7dc3);	# u64
-	&data_word(0xf27b896f,0x72be5d74);	# u64
-	&data_word(0x3b1696b1,0x80deb1fe);	# u64
-	&data_word(0x25c71235,0x9bdc06a7);	# u64
-	&data_word(0xcf692694,0xc19bf174);	# u64
-	&data_word(0x9ef14ad2,0xe49b69c1);	# u64
-	&data_word(0x384f25e3,0xefbe4786);	# u64
-	&data_word(0x8b8cd5b5,0x0fc19dc6);	# u64
-	&data_word(0x77ac9c65,0x240ca1cc);	# u64
-	&data_word(0x592b0275,0x2de92c6f);	# u64
-	&data_word(0x6ea6e483,0x4a7484aa);	# u64
-	&data_word(0xbd41fbd4,0x5cb0a9dc);	# u64
-	&data_word(0x831153b5,0x76f988da);	# u64
-	&data_word(0xee66dfab,0x983e5152);	# u64
-	&data_word(0x2db43210,0xa831c66d);	# u64
-	&data_word(0x98fb213f,0xb00327c8);	# u64
-	&data_word(0xbeef0ee4,0xbf597fc7);	# u64
-	&data_word(0x3da88fc2,0xc6e00bf3);	# u64
-	&data_word(0x930aa725,0xd5a79147);	# u64
-	&data_word(0xe003826f,0x06ca6351);	# u64
-	&data_word(0x0a0e6e70,0x14292967);	# u64
-	&data_word(0x46d22ffc,0x27b70a85);	# u64
-	&data_word(0x5c26c926,0x2e1b2138);	# u64
-	&data_word(0x5ac42aed,0x4d2c6dfc);	# u64
-	&data_word(0x9d95b3df,0x53380d13);	# u64
-	&data_word(0x8baf63de,0x650a7354);	# u64
-	&data_word(0x3c77b2a8,0x766a0abb);	# u64
-	&data_word(0x47edaee6,0x81c2c92e);	# u64
-	&data_word(0x1482353b,0x92722c85);	# u64
-	&data_word(0x4cf10364,0xa2bfe8a1);	# u64
-	&data_word(0xbc423001,0xa81a664b);	# u64
-	&data_word(0xd0f89791,0xc24b8b70);	# u64
-	&data_word(0x0654be30,0xc76c51a3);	# u64
-	&data_word(0xd6ef5218,0xd192e819);	# u64
-	&data_word(0x5565a910,0xd6990624);	# u64
-	&data_word(0x5771202a,0xf40e3585);	# u64
-	&data_word(0x32bbd1b8,0x106aa070);	# u64
-	&data_word(0xb8d2d0c8,0x19a4c116);	# u64
-	&data_word(0x5141ab53,0x1e376c08);	# u64
-	&data_word(0xdf8eeb99,0x2748774c);	# u64
-	&data_word(0xe19b48a8,0x34b0bcb5);	# u64
-	&data_word(0xc5c95a63,0x391c0cb3);	# u64
-	&data_word(0xe3418acb,0x4ed8aa4a);	# u64
-	&data_word(0x7763e373,0x5b9cca4f);	# u64
-	&data_word(0xd6b2b8a3,0x682e6ff3);	# u64
-	&data_word(0x5defb2fc,0x748f82ee);	# u64
-	&data_word(0x43172f60,0x78a5636f);	# u64
-	&data_word(0xa1f0ab72,0x84c87814);	# u64
-	&data_word(0x1a6439ec,0x8cc70208);	# u64
-	&data_word(0x23631e28,0x90befffa);	# u64
-	&data_word(0xde82bde9,0xa4506ceb);	# u64
-	&data_word(0xb2c67915,0xbef9a3f7);	# u64
-	&data_word(0xe372532b,0xc67178f2);	# u64
-	&data_word(0xea26619c,0xca273ece);	# u64
-	&data_word(0x21c0c207,0xd186b8c7);	# u64
-	&data_word(0xcde0eb1e,0xeada7dd6);	# u64
-	&data_word(0xee6ed178,0xf57d4f7f);	# u64
-	&data_word(0x72176fba,0x06f067aa);	# u64
-	&data_word(0xa2c898a6,0x0a637dc5);	# u64
-	&data_word(0xbef90dae,0x113f9804);	# u64
-	&data_word(0x131c471b,0x1b710b35);	# u64
-	&data_word(0x23047d84,0x28db77f5);	# u64
-	&data_word(0x40c72493,0x32caab7b);	# u64
-	&data_word(0x15c9bebc,0x3c9ebe0a);	# u64
-	&data_word(0x9c100d4c,0x431d67c4);	# u64
-	&data_word(0xcb3e42b6,0x4cc5d4be);	# u64
-	&data_word(0xfc657e2a,0x597f299c);	# u64
-	&data_word(0x3ad6faec,0x5fcb6fab);	# u64
-	&data_word(0x4a475817,0x6c44198c);	# u64
-
-&function_end_B($func);
-
-&asm_finish();
diff --git a/crypto/openssl/crypto/sha/sha.c b/crypto/openssl/crypto/sha/sha.c
deleted file mode 100644
index 42126551d12e..000000000000
--- a/crypto/openssl/crypto/sha/sha.c
+++ /dev/null
@@ -1,124 +0,0 @@
-/* crypto/sha/sha.c */
-/* Copyright (C) 1995-1998 Eric Young (eay@cryptsoft.com)
- * All rights reserved.
- *
- * This package is an SSL implementation written
- * by Eric Young (eay@cryptsoft.com).
- * The implementation was written so as to conform with Netscapes SSL.
- * 
- * This library is free for commercial and non-commercial use as long as
- * the following conditions are aheared to.  The following conditions
- * apply to all code found in this distribution, be it the RC4, RSA,
- * lhash, DES, etc., code; not just the SSL code.  The SSL documentation
- * included with this distribution is covered by the same copyright terms
- * except that the holder is Tim Hudson (tjh@cryptsoft.com).
- * 
- * Copyright remains Eric Young's, and as such any Copyright notices in
- * the code are not to be removed.
- * If this package is used in a product, Eric Young should be given attribution
- * as the author of the parts of the library used.
- * This can be in the form of a textual message at program startup or
- * in documentation (online or textual) provided with the package.
- * 
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions
- * are met:
- * 1. Redistributions of source code must retain the copyright
- *    notice, this list of conditions and the following disclaimer.
- * 2. Redistributions in binary form must reproduce the above copyright
- *    notice, this list of conditions and the following disclaimer in the
- *    documentation and/or other materials provided with the distribution.
- * 3. All advertising materials mentioning features or use of this software
- *    must display the following acknowledgement:
- *    "This product includes cryptographic software written by
- *     Eric Young (eay@cryptsoft.com)"
- *    The word 'cryptographic' can be left out if the rouines from the library
- *    being used are not cryptographic related :-).
- * 4. If you include any Windows specific code (or a derivative thereof) from 
- *    the apps directory (application code) you must include an acknowledgement:
- *    "This product includes software written by Tim Hudson (tjh@cryptsoft.com)"
- * 
- * THIS SOFTWARE IS PROVIDED BY ERIC YOUNG ``AS IS'' AND
- * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
- * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
- * ARE DISCLAIMED.  IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE
- * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
- * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
- * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
- * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
- * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
- * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
- * SUCH DAMAGE.
- * 
- * The licence and distribution terms for any publically available version or
- * derivative of this code cannot be changed.  i.e. this code cannot simply be
- * copied and put under another distribution licence
- * [including the GNU Public Licence.]
- */
-
-#include <stdio.h>
-#include <stdlib.h>
-#include <openssl/sha.h>
-
-#define BUFSIZE	1024*16
-
-void do_fp(FILE *f);
-void pt(unsigned char *md);
-int read(int, void *, unsigned int);
-int main(int argc, char **argv)
-	{
-	int i,err=0;
-	FILE *IN;
-
-	if (argc == 1)
-		{
-		do_fp(stdin);
-		}
-	else
-		{
-		for (i=1; i<argc; i++)
-			{
-			IN=fopen(argv[i],"r");
-			if (IN == NULL)
-				{
-				perror(argv[i]);
-				err++;
-				continue;
-				}
-			printf("SHA(%s)= ",argv[i]);
-			do_fp(IN);
-			fclose(IN);
-			}
-		}
-	exit(err);
-	}
-
-void do_fp(FILE *f)
-	{
-	SHA_CTX c;
-	unsigned char md[SHA_DIGEST_LENGTH];
-	int fd;
-	int i;
-	unsigned char buf[BUFSIZE];
-
-	fd=fileno(f);
-	SHA_Init(&c);
-	for (;;)
-		{
-		i=read(fd,buf,BUFSIZE);
-		if (i <= 0) break;
-		SHA_Update(&c,buf,(unsigned long)i);
-		}
-	SHA_Final(&(md[0]),&c);
-	pt(md);
-	}
-
-void pt(unsigned char *md)
-	{
-	int i;
-
-	for (i=0; i<SHA_DIGEST_LENGTH; i++)
-		printf("%02x",md[i]);
-	printf("\n");
-	}
-
diff --git a/crypto/openssl/crypto/sha/sha.h b/crypto/openssl/crypto/sha/sha.h
deleted file mode 100644
index eed44d7f9465..000000000000
--- a/crypto/openssl/crypto/sha/sha.h
+++ /dev/null
@@ -1,200 +0,0 @@
-/* crypto/sha/sha.h */
-/* Copyright (C) 1995-1998 Eric Young (eay@cryptsoft.com)
- * All rights reserved.
- *
- * This package is an SSL implementation written
- * by Eric Young (eay@cryptsoft.com).
- * The implementation was written so as to conform with Netscapes SSL.
- * 
- * This library is free for commercial and non-commercial use as long as
- * the following conditions are aheared to.  The following conditions
- * apply to all code found in this distribution, be it the RC4, RSA,
- * lhash, DES, etc., code; not just the SSL code.  The SSL documentation
- * included with this distribution is covered by the same copyright terms
- * except that the holder is Tim Hudson (tjh@cryptsoft.com).
- * 
- * Copyright remains Eric Young's, and as such any Copyright notices in
- * the code are not to be removed.
- * If this package is used in a product, Eric Young should be given attribution
- * as the author of the parts of the library used.
- * This can be in the form of a textual message at program startup or
- * in documentation (online or textual) provided with the package.
- * 
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions
- * are met:
- * 1. Redistributions of source code must retain the copyright
- *    notice, this list of conditions and the following disclaimer.
- * 2. Redistributions in binary form must reproduce the above copyright
- *    notice, this list of conditions and the following disclaimer in the
- *    documentation and/or other materials provided with the distribution.
- * 3. All advertising materials mentioning features or use of this software
- *    must display the following acknowledgement:
- *    "This product includes cryptographic software written by
- *     Eric Young (eay@cryptsoft.com)"
- *    The word 'cryptographic' can be left out if the rouines from the library
- *    being used are not cryptographic related :-).
- * 4. If you include any Windows specific code (or a derivative thereof) from 
- *    the apps directory (application code) you must include an acknowledgement:
- *    "This product includes software written by Tim Hudson (tjh@cryptsoft.com)"
- * 
- * THIS SOFTWARE IS PROVIDED BY ERIC YOUNG ``AS IS'' AND
- * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
- * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
- * ARE DISCLAIMED.  IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE
- * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
- * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
- * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
- * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
- * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
- * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
- * SUCH DAMAGE.
- * 
- * The licence and distribution terms for any publically available version or
- * derivative of this code cannot be changed.  i.e. this code cannot simply be
- * copied and put under another distribution licence
- * [including the GNU Public Licence.]
- */
-
-#ifndef HEADER_SHA_H
-#define HEADER_SHA_H
-
-#include <openssl/e_os2.h>
-#include <stddef.h>
-
-#ifdef  __cplusplus
-extern "C" {
-#endif
-
-#if defined(OPENSSL_NO_SHA) || (defined(OPENSSL_NO_SHA0) && defined(OPENSSL_NO_SHA1))
-#error SHA is disabled.
-#endif
-
-#if defined(OPENSSL_FIPS)
-#define FIPS_SHA_SIZE_T size_t
-#endif
-
-/*
- * !!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
- * ! SHA_LONG has to be at least 32 bits wide. If it's wider, then !
- * ! SHA_LONG_LOG2 has to be defined along.                        !
- * !!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
- */
-
-#if defined(OPENSSL_SYS_WIN16) || defined(__LP32__)
-#define SHA_LONG unsigned long
-#elif defined(OPENSSL_SYS_CRAY) || defined(__ILP64__)
-#define SHA_LONG unsigned long
-#define SHA_LONG_LOG2 3
-#else
-#define SHA_LONG unsigned int
-#endif
-
-#define SHA_LBLOCK	16
-#define SHA_CBLOCK	(SHA_LBLOCK*4)	/* SHA treats input data as a
-					 * contiguous array of 32 bit
-					 * wide big-endian values. */
-#define SHA_LAST_BLOCK  (SHA_CBLOCK-8)
-#define SHA_DIGEST_LENGTH 20
-
-typedef struct SHAstate_st
-	{
-	SHA_LONG h0,h1,h2,h3,h4;
-	SHA_LONG Nl,Nh;
-	SHA_LONG data[SHA_LBLOCK];
-	unsigned int num;
-	} SHA_CTX;
-
-#ifndef OPENSSL_NO_SHA0
-int SHA_Init(SHA_CTX *c);
-int SHA_Update(SHA_CTX *c, const void *data, size_t len);
-int SHA_Final(unsigned char *md, SHA_CTX *c);
-unsigned char *SHA(const unsigned char *d, size_t n, unsigned char *md);
-void SHA_Transform(SHA_CTX *c, const unsigned char *data);
-#endif
-#ifndef OPENSSL_NO_SHA1
-int SHA1_Init(SHA_CTX *c);
-int SHA1_Update(SHA_CTX *c, const void *data, size_t len);
-int SHA1_Final(unsigned char *md, SHA_CTX *c);
-unsigned char *SHA1(const unsigned char *d, size_t n, unsigned char *md);
-void SHA1_Transform(SHA_CTX *c, const unsigned char *data);
-#endif
-
-#define SHA256_CBLOCK	(SHA_LBLOCK*4)	/* SHA-256 treats input data as a
-					 * contiguous array of 32 bit
-					 * wide big-endian values. */
-#define SHA224_DIGEST_LENGTH	28
-#define SHA256_DIGEST_LENGTH	32
-
-typedef struct SHA256state_st
-	{
-	SHA_LONG h[8];
-	SHA_LONG Nl,Nh;
-	SHA_LONG data[SHA_LBLOCK];
-	unsigned int num,md_len;
-	} SHA256_CTX;
-
-#ifndef OPENSSL_NO_SHA256
-int SHA224_Init(SHA256_CTX *c);
-int SHA224_Update(SHA256_CTX *c, const void *data, size_t len);
-int SHA224_Final(unsigned char *md, SHA256_CTX *c);
-unsigned char *SHA224(const unsigned char *d, size_t n,unsigned char *md);
-int SHA256_Init(SHA256_CTX *c);
-int SHA256_Update(SHA256_CTX *c, const void *data, size_t len);
-int SHA256_Final(unsigned char *md, SHA256_CTX *c);
-unsigned char *SHA256(const unsigned char *d, size_t n,unsigned char *md);
-void SHA256_Transform(SHA256_CTX *c, const unsigned char *data);
-#endif
-
-#define SHA384_DIGEST_LENGTH	48
-#define SHA512_DIGEST_LENGTH	64
-
-#ifndef OPENSSL_NO_SHA512
-/*
- * Unlike 32-bit digest algorithms, SHA-512 *relies* on SHA_LONG64
- * being exactly 64-bit wide. See Implementation Notes in sha512.c
- * for further details.
- */
-#define SHA512_CBLOCK	(SHA_LBLOCK*8)	/* SHA-512 treats input data as a
-					 * contiguous array of 64 bit
-					 * wide big-endian values. */
-#if (defined(_WIN32) || defined(_WIN64)) && !defined(__MINGW32__)
-#define SHA_LONG64 unsigned __int64
-#define U64(C)     C##UI64
-#elif defined(__arch64__)
-#define SHA_LONG64 unsigned long
-#define U64(C)     C##UL
-#else
-#define SHA_LONG64 unsigned long long
-#define U64(C)     C##ULL
-#endif
-
-typedef struct SHA512state_st
-	{
-	SHA_LONG64 h[8];
-	SHA_LONG64 Nl,Nh;
-	union {
-		SHA_LONG64	d[SHA_LBLOCK];
-		unsigned char	p[SHA512_CBLOCK];
-	} u;
-	unsigned int num,md_len;
-	} SHA512_CTX;
-#endif
-
-#ifndef OPENSSL_NO_SHA512
-int SHA384_Init(SHA512_CTX *c);
-int SHA384_Update(SHA512_CTX *c, const void *data, size_t len);
-int SHA384_Final(unsigned char *md, SHA512_CTX *c);
-unsigned char *SHA384(const unsigned char *d, size_t n,unsigned char *md);
-int SHA512_Init(SHA512_CTX *c);
-int SHA512_Update(SHA512_CTX *c, const void *data, size_t len);
-int SHA512_Final(unsigned char *md, SHA512_CTX *c);
-unsigned char *SHA512(const unsigned char *d, size_t n,unsigned char *md);
-void SHA512_Transform(SHA512_CTX *c, const unsigned char *data);
-#endif
-
-#ifdef  __cplusplus
-}
-#endif
-
-#endif
diff --git a/crypto/openssl/crypto/sha/sha1.c b/crypto/openssl/crypto/sha/sha1.c
deleted file mode 100644
index d350c88ee47d..000000000000
--- a/crypto/openssl/crypto/sha/sha1.c
+++ /dev/null
@@ -1,127 +0,0 @@
-/* crypto/sha/sha1.c */
-/* Copyright (C) 1995-1998 Eric Young (eay@cryptsoft.com)
- * All rights reserved.
- *
- * This package is an SSL implementation written
- * by Eric Young (eay@cryptsoft.com).
- * The implementation was written so as to conform with Netscapes SSL.
- * 
- * This library is free for commercial and non-commercial use as long as
- * the following conditions are aheared to.  The following conditions
- * apply to all code found in this distribution, be it the RC4, RSA,
- * lhash, DES, etc., code; not just the SSL code.  The SSL documentation
- * included with this distribution is covered by the same copyright terms
- * except that the holder is Tim Hudson (tjh@cryptsoft.com).
- * 
- * Copyright remains Eric Young's, and as such any Copyright notices in
- * the code are not to be removed.
- * If this package is used in a product, Eric Young should be given attribution
- * as the author of the parts of the library used.
- * This can be in the form of a textual message at program startup or
- * in documentation (online or textual) provided with the package.
- * 
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions
- * are met:
- * 1. Redistributions of source code must retain the copyright
- *    notice, this list of conditions and the following disclaimer.
- * 2. Redistributions in binary form must reproduce the above copyright
- *    notice, this list of conditions and the following disclaimer in the
- *    documentation and/or other materials provided with the distribution.
- * 3. All advertising materials mentioning features or use of this software
- *    must display the following acknowledgement:
- *    "This product includes cryptographic software written by
- *     Eric Young (eay@cryptsoft.com)"
- *    The word 'cryptographic' can be left out if the rouines from the library
- *    being used are not cryptographic related :-).
- * 4. If you include any Windows specific code (or a derivative thereof) from 
- *    the apps directory (application code) you must include an acknowledgement:
- *    "This product includes software written by Tim Hudson (tjh@cryptsoft.com)"
- * 
- * THIS SOFTWARE IS PROVIDED BY ERIC YOUNG ``AS IS'' AND
- * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
- * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
- * ARE DISCLAIMED.  IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE
- * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
- * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
- * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
- * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
- * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
- * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
- * SUCH DAMAGE.
- * 
- * The licence and distribution terms for any publically available version or
- * derivative of this code cannot be changed.  i.e. this code cannot simply be
- * copied and put under another distribution licence
- * [including the GNU Public Licence.]
- */
-
-#include <stdio.h>
-#include <stdlib.h>
-#include <openssl/sha.h>
-
-#define BUFSIZE	1024*16
-
-void do_fp(FILE *f);
-void pt(unsigned char *md);
-#ifndef _OSD_POSIX
-int read(int, void *, unsigned int);
-#endif
-
-int main(int argc, char **argv)
-	{
-	int i,err=0;
-	FILE *IN;
-
-	if (argc == 1)
-		{
-		do_fp(stdin);
-		}
-	else
-		{
-		for (i=1; i<argc; i++)
-			{
-			IN=fopen(argv[i],"r");
-			if (IN == NULL)
-				{
-				perror(argv[i]);
-				err++;
-				continue;
-				}
-			printf("SHA1(%s)= ",argv[i]);
-			do_fp(IN);
-			fclose(IN);
-			}
-		}
-	exit(err);
-	}
-
-void do_fp(FILE *f)
-	{
-	SHA_CTX c;
-	unsigned char md[SHA_DIGEST_LENGTH];
-	int fd;
-	int i;
-	unsigned char buf[BUFSIZE];
-
-	fd=fileno(f);
-	SHA1_Init(&c);
-	for (;;)
-		{
-		i=read(fd,buf,BUFSIZE);
-		if (i <= 0) break;
-		SHA1_Update(&c,buf,(unsigned long)i);
-		}
-	SHA1_Final(&(md[0]),&c);
-	pt(md);
-	}
-
-void pt(unsigned char *md)
-	{
-	int i;
-
-	for (i=0; i<SHA_DIGEST_LENGTH; i++)
-		printf("%02x",md[i]);
-	printf("\n");
-	}
-
diff --git a/crypto/openssl/crypto/sha/sha1_one.c b/crypto/openssl/crypto/sha/sha1_one.c
deleted file mode 100644
index 7c65b60276cd..000000000000
--- a/crypto/openssl/crypto/sha/sha1_one.c
+++ /dev/null
@@ -1,78 +0,0 @@
-/* crypto/sha/sha1_one.c */
-/* Copyright (C) 1995-1998 Eric Young (eay@cryptsoft.com)
- * All rights reserved.
- *
- * This package is an SSL implementation written
- * by Eric Young (eay@cryptsoft.com).
- * The implementation was written so as to conform with Netscapes SSL.
- * 
- * This library is free for commercial and non-commercial use as long as
- * the following conditions are aheared to.  The following conditions
- * apply to all code found in this distribution, be it the RC4, RSA,
- * lhash, DES, etc., code; not just the SSL code.  The SSL documentation
- * included with this distribution is covered by the same copyright terms
- * except that the holder is Tim Hudson (tjh@cryptsoft.com).
- * 
- * Copyright remains Eric Young's, and as such any Copyright notices in
- * the code are not to be removed.
- * If this package is used in a product, Eric Young should be given attribution
- * as the author of the parts of the library used.
- * This can be in the form of a textual message at program startup or
- * in documentation (online or textual) provided with the package.
- * 
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions
- * are met:
- * 1. Redistributions of source code must retain the copyright
- *    notice, this list of conditions and the following disclaimer.
- * 2. Redistributions in binary form must reproduce the above copyright
- *    notice, this list of conditions and the following disclaimer in the
- *    documentation and/or other materials provided with the distribution.
- * 3. All advertising materials mentioning features or use of this software
- *    must display the following acknowledgement:
- *    "This product includes cryptographic software written by
- *     Eric Young (eay@cryptsoft.com)"
- *    The word 'cryptographic' can be left out if the rouines from the library
- *    being used are not cryptographic related :-).
- * 4. If you include any Windows specific code (or a derivative thereof) from 
- *    the apps directory (application code) you must include an acknowledgement:
- *    "This product includes software written by Tim Hudson (tjh@cryptsoft.com)"
- * 
- * THIS SOFTWARE IS PROVIDED BY ERIC YOUNG ``AS IS'' AND
- * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
- * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
- * ARE DISCLAIMED.  IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE
- * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
- * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
- * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
- * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
- * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
- * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
- * SUCH DAMAGE.
- * 
- * The licence and distribution terms for any publically available version or
- * derivative of this code cannot be changed.  i.e. this code cannot simply be
- * copied and put under another distribution licence
- * [including the GNU Public Licence.]
- */
-
-#include <stdio.h>
-#include <string.h>
-#include <openssl/sha.h>
-#include <openssl/crypto.h>
-
-#ifndef OPENSSL_NO_SHA1
-unsigned char *SHA1(const unsigned char *d, size_t n, unsigned char *md)
-	{
-	SHA_CTX c;
-	static unsigned char m[SHA_DIGEST_LENGTH];
-
-	if (md == NULL) md=m;
-	if (!SHA1_Init(&c))
-		return NULL;
-	SHA1_Update(&c,d,n);
-	SHA1_Final(md,&c);
-	OPENSSL_cleanse(&c,sizeof(c));
-	return(md);
-	}
-#endif
diff --git a/crypto/openssl/crypto/sha/sha1dgst.c b/crypto/openssl/crypto/sha/sha1dgst.c
deleted file mode 100644
index 50d1925cdeb2..000000000000
--- a/crypto/openssl/crypto/sha/sha1dgst.c
+++ /dev/null
@@ -1,74 +0,0 @@
-/* crypto/sha/sha1dgst.c */
-/* Copyright (C) 1995-1998 Eric Young (eay@cryptsoft.com)
- * All rights reserved.
- *
- * This package is an SSL implementation written
- * by Eric Young (eay@cryptsoft.com).
- * The implementation was written so as to conform with Netscapes SSL.
- * 
- * This library is free for commercial and non-commercial use as long as
- * the following conditions are aheared to.  The following conditions
- * apply to all code found in this distribution, be it the RC4, RSA,
- * lhash, DES, etc., code; not just the SSL code.  The SSL documentation
- * included with this distribution is covered by the same copyright terms
- * except that the holder is Tim Hudson (tjh@cryptsoft.com).
- * 
- * Copyright remains Eric Young's, and as such any Copyright notices in
- * the code are not to be removed.
- * If this package is used in a product, Eric Young should be given attribution
- * as the author of the parts of the library used.
- * This can be in the form of a textual message at program startup or
- * in documentation (online or textual) provided with the package.
- * 
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions
- * are met:
- * 1. Redistributions of source code must retain the copyright
- *    notice, this list of conditions and the following disclaimer.
- * 2. Redistributions in binary form must reproduce the above copyright
- *    notice, this list of conditions and the following disclaimer in the
- *    documentation and/or other materials provided with the distribution.
- * 3. All advertising materials mentioning features or use of this software
- *    must display the following acknowledgement:
- *    "This product includes cryptographic software written by
- *     Eric Young (eay@cryptsoft.com)"
- *    The word 'cryptographic' can be left out if the rouines from the library
- *    being used are not cryptographic related :-).
- * 4. If you include any Windows specific code (or a derivative thereof) from 
- *    the apps directory (application code) you must include an acknowledgement:
- *    "This product includes software written by Tim Hudson (tjh@cryptsoft.com)"
- * 
- * THIS SOFTWARE IS PROVIDED BY ERIC YOUNG ``AS IS'' AND
- * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
- * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
- * ARE DISCLAIMED.  IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE
- * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
- * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
- * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
- * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
- * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
- * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
- * SUCH DAMAGE.
- * 
- * The licence and distribution terms for any publically available version or
- * derivative of this code cannot be changed.  i.e. this code cannot simply be
- * copied and put under another distribution licence
- * [including the GNU Public Licence.]
- */
-
-#include <openssl/opensslconf.h>
-#if !defined(OPENSSL_NO_SHA1) && !defined(OPENSSL_NO_SHA)
-
-#undef  SHA_0
-#define SHA_1
-
-#include <openssl/opensslv.h>
-
-const char SHA1_version[]="SHA1" OPENSSL_VERSION_PTEXT;
-
-/* The implementation is in ../md32_common.h */
-
-#include "sha_locl.h"
-
-#endif
-
diff --git a/crypto/openssl/crypto/sha/sha1s.cpp b/crypto/openssl/crypto/sha/sha1s.cpp
deleted file mode 100644
index af23d1e0f218..000000000000
--- a/crypto/openssl/crypto/sha/sha1s.cpp
+++ /dev/null
@@ -1,82 +0,0 @@
-//
-// gettsc.inl
-//
-// gives access to the Pentium's (secret) cycle counter
-//
-// This software was written by Leonard Janke (janke@unixg.ubc.ca)
-// in 1996-7 and is entered, by him, into the public domain.
-
-#if defined(__WATCOMC__)
-void GetTSC(unsigned long&);
-#pragma aux GetTSC = 0x0f 0x31 "mov [edi], eax" parm [edi] modify [edx eax];
-#elif defined(__GNUC__)
-inline
-void GetTSC(unsigned long& tsc)
-{
-  asm volatile(".byte 15, 49\n\t"
-	       : "=eax" (tsc)
-	       :
-	       : "%edx", "%eax");
-}
-#elif defined(_MSC_VER)
-inline
-void GetTSC(unsigned long& tsc)
-{
-  unsigned long a;
-  __asm _emit 0fh
-  __asm _emit 31h
-  __asm mov a, eax;
-  tsc=a;
-}
-#endif      
-
-#include <stdio.h>
-#include <stdlib.h>
-#include <openssl/sha.h>
-
-#define sha1_block_x86 sha1_block_asm_data_order
-extern "C" {
-void sha1_block_x86(SHA_CTX *ctx, unsigned char *buffer,int num);
-}
-
-void main(int argc,char *argv[])
-	{
-	unsigned char buffer[64*256];
-	SHA_CTX ctx;
-	unsigned long s1,s2,e1,e2;
-	unsigned char k[16];
-	unsigned long data[2];
-	unsigned char iv[8];
-	int i,num=0,numm;
-	int j=0;
-
-	if (argc >= 2)
-		num=atoi(argv[1]);
-
-	if (num == 0) num=16;
-	if (num > 250) num=16;
-	numm=num+2;
-#if 0
-	num*=64;
-	numm*=64;
-#endif
-
-	for (j=0; j<6; j++)
-		{
-		for (i=0; i<10; i++) /**/
-			{
-			sha1_block_x86(&ctx,buffer,numm);
-			GetTSC(s1);
-			sha1_block_x86(&ctx,buffer,numm);
-			GetTSC(e1);
-			GetTSC(s2);
-			sha1_block_x86(&ctx,buffer,num);
-			GetTSC(e2);
-			sha1_block_x86(&ctx,buffer,num);
-			}
-
-		printf("sha1 (%d bytes) %d %d (%.2f)\n",num*64,
-			e1-s1,e2-s2,(double)((e1-s1)-(e2-s2))/2);
-		}
-	}
-
diff --git a/crypto/openssl/crypto/sha/sha1test.c b/crypto/openssl/crypto/sha/sha1test.c
deleted file mode 100644
index b0650c7254f2..000000000000
--- a/crypto/openssl/crypto/sha/sha1test.c
+++ /dev/null
@@ -1,178 +0,0 @@
-/* crypto/sha/sha1test.c */
-/* Copyright (C) 1995-1998 Eric Young (eay@cryptsoft.com)
- * All rights reserved.
- *
- * This package is an SSL implementation written
- * by Eric Young (eay@cryptsoft.com).
- * The implementation was written so as to conform with Netscapes SSL.
- * 
- * This library is free for commercial and non-commercial use as long as
- * the following conditions are aheared to.  The following conditions
- * apply to all code found in this distribution, be it the RC4, RSA,
- * lhash, DES, etc., code; not just the SSL code.  The SSL documentation
- * included with this distribution is covered by the same copyright terms
- * except that the holder is Tim Hudson (tjh@cryptsoft.com).
- * 
- * Copyright remains Eric Young's, and as such any Copyright notices in
- * the code are not to be removed.
- * If this package is used in a product, Eric Young should be given attribution
- * as the author of the parts of the library used.
- * This can be in the form of a textual message at program startup or
- * in documentation (online or textual) provided with the package.
- * 
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions
- * are met:
- * 1. Redistributions of source code must retain the copyright
- *    notice, this list of conditions and the following disclaimer.
- * 2. Redistributions in binary form must reproduce the above copyright
- *    notice, this list of conditions and the following disclaimer in the
- *    documentation and/or other materials provided with the distribution.
- * 3. All advertising materials mentioning features or use of this software
- *    must display the following acknowledgement:
- *    "This product includes cryptographic software written by
- *     Eric Young (eay@cryptsoft.com)"
- *    The word 'cryptographic' can be left out if the rouines from the library
- *    being used are not cryptographic related :-).
- * 4. If you include any Windows specific code (or a derivative thereof) from 
- *    the apps directory (application code) you must include an acknowledgement:
- *    "This product includes software written by Tim Hudson (tjh@cryptsoft.com)"
- * 
- * THIS SOFTWARE IS PROVIDED BY ERIC YOUNG ``AS IS'' AND
- * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
- * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
- * ARE DISCLAIMED.  IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE
- * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
- * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
- * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
- * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
- * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
- * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
- * SUCH DAMAGE.
- * 
- * The licence and distribution terms for any publically available version or
- * derivative of this code cannot be changed.  i.e. this code cannot simply be
- * copied and put under another distribution licence
- * [including the GNU Public Licence.]
- */
-
-#include <stdio.h>
-#include <string.h>
-#include <stdlib.h>
-
-#include "../e_os.h"
-
-#ifdef OPENSSL_NO_SHA
-int main(int argc, char *argv[])
-{
-    printf("No SHA support\n");
-    return(0);
-}
-#else
-#include <openssl/evp.h>
-#include <openssl/sha.h>
-
-#ifdef CHARSET_EBCDIC
-#include <openssl/ebcdic.h>
-#endif
-
-#undef SHA_0 /* FIPS 180 */
-#define  SHA_1 /* FIPS 180-1 */
-
-static char *test[]={
-	"abc",
-	"abcdbcdecdefdefgefghfghighijhijkijkljklmklmnlmnomnopnopq",
-	NULL,
-	};
-
-#ifdef SHA_0
-static char *ret[]={
-	"0164b8a914cd2a5e74c4f7ff082c4d97f1edf880",
-	"d2516ee1acfa5baf33dfc1c471e438449ef134c8",
-	};
-static char *bigret=
-	"3232affa48628a26653b5aaa44541fd90d690603";
-#endif
-#ifdef SHA_1
-static char *ret[]={
-	"a9993e364706816aba3e25717850c26c9cd0d89d",
-	"84983e441c3bd26ebaae4aa1f95129e5e54670f1",
-	};
-static char *bigret=
-	"34aa973cd4c4daa4f61eeb2bdbad27316534016f";
-#endif
-
-static char *pt(unsigned char *md);
-int main(int argc, char *argv[])
-	{
-	int i,err=0;
-	unsigned char **P,**R;
-	static unsigned char buf[1000];
-	char *p,*r;
-	EVP_MD_CTX c;
-	unsigned char md[SHA_DIGEST_LENGTH];
-
-#ifdef CHARSET_EBCDIC
-	ebcdic2ascii(test[0], test[0], strlen(test[0]));
-	ebcdic2ascii(test[1], test[1], strlen(test[1]));
-#endif
-
-	EVP_MD_CTX_init(&c);
-	P=(unsigned char **)test;
-	R=(unsigned char **)ret;
-	i=1;
-	while (*P != NULL)
-		{
-		EVP_Digest(*P,strlen((char *)*P),md,NULL,EVP_sha1(), NULL);
-		p=pt(md);
-		if (strcmp(p,(char *)*R) != 0)
-			{
-			printf("error calculating SHA1 on '%s'\n",*P);
-			printf("got %s instead of %s\n",p,*R);
-			err++;
-			}
-		else
-			printf("test %d ok\n",i);
-		i++;
-		R++;
-		P++;
-		}
-
-	memset(buf,'a',1000);
-#ifdef CHARSET_EBCDIC
-	ebcdic2ascii(buf, buf, 1000);
-#endif /*CHARSET_EBCDIC*/
-	EVP_DigestInit_ex(&c,EVP_sha1(), NULL);
-	for (i=0; i<1000; i++)
-		EVP_DigestUpdate(&c,buf,1000);
-	EVP_DigestFinal_ex(&c,md,NULL);
-	p=pt(md);
-
-	r=bigret;
-	if (strcmp(p,r) != 0)
-		{
-		printf("error calculating SHA1 on 'a' * 1000\n");
-		printf("got %s instead of %s\n",p,r);
-		err++;
-		}
-	else
-		printf("test 3 ok\n");
-
-#ifdef OPENSSL_SYS_NETWARE
-    if (err) printf("ERROR: %d\n", err);
-#endif
-	EXIT(err);
-	EVP_MD_CTX_cleanup(&c);
-	return(0);
-	}
-
-static char *pt(unsigned char *md)
-	{
-	int i;
-	static char buf[80];
-
-	for (i=0; i<SHA_DIGEST_LENGTH; i++)
-		sprintf(&(buf[i*2]),"%02x",md[i]);
-	return(buf);
-	}
-#endif
diff --git a/crypto/openssl/crypto/sha/sha256.c b/crypto/openssl/crypto/sha/sha256.c
deleted file mode 100644
index 05ae9445db11..000000000000
--- a/crypto/openssl/crypto/sha/sha256.c
+++ /dev/null
@@ -1,319 +0,0 @@
-/* crypto/sha/sha256.c */
-/* ====================================================================
- * Copyright (c) 2004 The OpenSSL Project.  All rights reserved
- * according to the OpenSSL license [found in ../../LICENSE].
- * ====================================================================
- */
-#include <openssl/opensslconf.h>
-#if !defined(OPENSSL_NO_SHA) && !defined(OPENSSL_NO_SHA256)
-
-#include <stdlib.h>
-#include <string.h>
-
-#include <openssl/crypto.h>
-#include <openssl/sha.h>
-#include <openssl/opensslv.h>
-
-const char SHA256_version[]="SHA-256" OPENSSL_VERSION_PTEXT;
-
-int SHA224_Init (SHA256_CTX *c)
-	{
-	c->h[0]=0xc1059ed8UL;	c->h[1]=0x367cd507UL;
-	c->h[2]=0x3070dd17UL;	c->h[3]=0xf70e5939UL;
-	c->h[4]=0xffc00b31UL;	c->h[5]=0x68581511UL;
-	c->h[6]=0x64f98fa7UL;	c->h[7]=0xbefa4fa4UL;
-	c->Nl=0;	c->Nh=0;
-	c->num=0;	c->md_len=SHA224_DIGEST_LENGTH;
-	return 1;
-	}
-
-int SHA256_Init (SHA256_CTX *c)
-	{
-	c->h[0]=0x6a09e667UL;	c->h[1]=0xbb67ae85UL;
-	c->h[2]=0x3c6ef372UL;	c->h[3]=0xa54ff53aUL;
-	c->h[4]=0x510e527fUL;	c->h[5]=0x9b05688cUL;
-	c->h[6]=0x1f83d9abUL;	c->h[7]=0x5be0cd19UL;
-	c->Nl=0;	c->Nh=0;
-	c->num=0;	c->md_len=SHA256_DIGEST_LENGTH;
-	return 1;
-	}
-
-unsigned char *SHA224(const unsigned char *d, size_t n, unsigned char *md)
-	{
-	SHA256_CTX c;
-	static unsigned char m[SHA224_DIGEST_LENGTH];
-
-	if (md == NULL) md=m;
-	SHA224_Init(&c);
-	SHA256_Update(&c,d,n);
-	SHA256_Final(md,&c);
-	OPENSSL_cleanse(&c,sizeof(c));
-	return(md);
-	}
-
-unsigned char *SHA256(const unsigned char *d, size_t n, unsigned char *md)
-	{
-	SHA256_CTX c;
-	static unsigned char m[SHA256_DIGEST_LENGTH];
-
-	if (md == NULL) md=m;
-	SHA256_Init(&c);
-	SHA256_Update(&c,d,n);
-	SHA256_Final(md,&c);
-	OPENSSL_cleanse(&c,sizeof(c));
-	return(md);
-	}
-
-int SHA224_Update(SHA256_CTX *c, const void *data, size_t len)
-{   return SHA256_Update (c,data,len);   }
-int SHA224_Final (unsigned char *md, SHA256_CTX *c)
-{   return SHA256_Final (md,c);   }
-
-#ifndef	SHA_LONG_LOG2
-#define	SHA_LONG_LOG2	2	/* default to 32 bits */
-#endif
-
-#define	DATA_ORDER_IS_BIG_ENDIAN
-
-#define	HASH_LONG		SHA_LONG
-#define	HASH_LONG_LOG2		SHA_LONG_LOG2
-#define	HASH_CTX		SHA256_CTX
-#define	HASH_CBLOCK		SHA_CBLOCK
-#define	HASH_LBLOCK		SHA_LBLOCK
-/*
- * Note that FIPS180-2 discusses "Truncation of the Hash Function Output."
- * default: case below covers for it. It's not clear however if it's
- * permitted to truncate to amount of bytes not divisible by 4. I bet not,
- * but if it is, then default: case shall be extended. For reference.
- * Idea behind separate cases for pre-defined lenghts is to let the
- * compiler decide if it's appropriate to unroll small loops.
- */
-#define	HASH_MAKE_STRING(c,s)	do {	\
-	unsigned long ll;		\
-	unsigned int  n;		\
-	switch ((c)->md_len)		\
-	{   case SHA224_DIGEST_LENGTH:	\
-		for (n=0;n<SHA224_DIGEST_LENGTH/4;n++)	\
-		{   ll=(c)->h[n]; HOST_l2c(ll,(s));   }	\
-		break;			\
-	    case SHA256_DIGEST_LENGTH:	\
-		for (n=0;n<SHA256_DIGEST_LENGTH/4;n++)	\
-		{   ll=(c)->h[n]; HOST_l2c(ll,(s));   }	\
-		break;			\
-	    default:			\
-		if ((c)->md_len > SHA256_DIGEST_LENGTH)	\
-		    return 0;				\
-		for (n=0;n<(c)->md_len/4;n++)		\
-		{   ll=(c)->h[n]; HOST_l2c(ll,(s));   }	\
-		break;			\
-	}				\
-	} while (0)
-
-#define	HASH_UPDATE		SHA256_Update
-#define	HASH_TRANSFORM		SHA256_Transform
-#define	HASH_FINAL		SHA256_Final
-#define	HASH_BLOCK_HOST_ORDER	sha256_block_host_order
-#define	HASH_BLOCK_DATA_ORDER	sha256_block_data_order
-void sha256_block_host_order (SHA256_CTX *ctx, const void *in, size_t num);
-void sha256_block_data_order (SHA256_CTX *ctx, const void *in, size_t num);
-
-#include "md32_common.h"
-
-#ifdef SHA256_ASM
-void sha256_block (SHA256_CTX *ctx, const void *in, size_t num, int host);
-#else
-static const SHA_LONG K256[64] = {
-	0x428a2f98UL,0x71374491UL,0xb5c0fbcfUL,0xe9b5dba5UL,
-	0x3956c25bUL,0x59f111f1UL,0x923f82a4UL,0xab1c5ed5UL,
-	0xd807aa98UL,0x12835b01UL,0x243185beUL,0x550c7dc3UL,
-	0x72be5d74UL,0x80deb1feUL,0x9bdc06a7UL,0xc19bf174UL,
-	0xe49b69c1UL,0xefbe4786UL,0x0fc19dc6UL,0x240ca1ccUL,
-	0x2de92c6fUL,0x4a7484aaUL,0x5cb0a9dcUL,0x76f988daUL,
-	0x983e5152UL,0xa831c66dUL,0xb00327c8UL,0xbf597fc7UL,
-	0xc6e00bf3UL,0xd5a79147UL,0x06ca6351UL,0x14292967UL,
-	0x27b70a85UL,0x2e1b2138UL,0x4d2c6dfcUL,0x53380d13UL,
-	0x650a7354UL,0x766a0abbUL,0x81c2c92eUL,0x92722c85UL,
-	0xa2bfe8a1UL,0xa81a664bUL,0xc24b8b70UL,0xc76c51a3UL,
-	0xd192e819UL,0xd6990624UL,0xf40e3585UL,0x106aa070UL,
-	0x19a4c116UL,0x1e376c08UL,0x2748774cUL,0x34b0bcb5UL,
-	0x391c0cb3UL,0x4ed8aa4aUL,0x5b9cca4fUL,0x682e6ff3UL,
-	0x748f82eeUL,0x78a5636fUL,0x84c87814UL,0x8cc70208UL,
-	0x90befffaUL,0xa4506cebUL,0xbef9a3f7UL,0xc67178f2UL };
-
-/*
- * FIPS specification refers to right rotations, while our ROTATE macro
- * is left one. This is why you might notice that rotation coefficients
- * differ from those observed in FIPS document by 32-N...
- */
-#define Sigma0(x)	(ROTATE((x),30) ^ ROTATE((x),19) ^ ROTATE((x),10))
-#define Sigma1(x)	(ROTATE((x),26) ^ ROTATE((x),21) ^ ROTATE((x),7))
-#define sigma0(x)	(ROTATE((x),25) ^ ROTATE((x),14) ^ ((x)>>3))
-#define sigma1(x)	(ROTATE((x),15) ^ ROTATE((x),13) ^ ((x)>>10))
-
-#define Ch(x,y,z)	(((x) & (y)) ^ ((~(x)) & (z)))
-#define Maj(x,y,z)	(((x) & (y)) ^ ((x) & (z)) ^ ((y) & (z)))
-
-#ifdef OPENSSL_SMALL_FOOTPRINT
-
-static void sha256_block (SHA256_CTX *ctx, const void *in, size_t num, int host)
-	{
-	unsigned MD32_REG_T a,b,c,d,e,f,g,h,s0,s1,T1,T2;
-	SHA_LONG	X[16];
-	int i;
-	const unsigned char *data=in;
-
-			while (num--) {
-
-	a = ctx->h[0];	b = ctx->h[1];	c = ctx->h[2];	d = ctx->h[3];
-	e = ctx->h[4];	f = ctx->h[5];	g = ctx->h[6];	h = ctx->h[7];
-
-	if (host)
-		{
-		const SHA_LONG *W=(const SHA_LONG *)data;
-
-		for (i=0;i<16;i++)
-			{
-			T1 = X[i] = W[i];
-			T1 += h + Sigma1(e) + Ch(e,f,g) + K256[i];
-			T2 = Sigma0(a) + Maj(a,b,c);
-			h = g;	g = f;	f = e;	e = d + T1;
-			d = c;	c = b;	b = a;	a = T1 + T2;
-			}
-
-		data += SHA256_CBLOCK;
-		}
-	else
-		{
-		SHA_LONG l;
-
-		for (i=0;i<16;i++)
-			{
-			HOST_c2l(data,l); T1 = X[i] = l;
-			T1 += h + Sigma1(e) + Ch(e,f,g) + K256[i];
-			T2 = Sigma0(a) + Maj(a,b,c);
-			h = g;	g = f;	f = e;	e = d + T1;
-			d = c;	c = b;	b = a;	a = T1 + T2;
-			}
-		}
-
-	for (;i<64;i++)
-		{
-		s0 = X[(i+1)&0x0f];	s0 = sigma0(s0);
-		s1 = X[(i+14)&0x0f];	s1 = sigma1(s1);
-
-		T1 = X[i&0xf] += s0 + s1 + X[(i+9)&0xf];
-		T1 += h + Sigma1(e) + Ch(e,f,g) + K256[i];
-		T2 = Sigma0(a) + Maj(a,b,c);
-		h = g;	g = f;	f = e;	e = d + T1;
-		d = c;	c = b;	b = a;	a = T1 + T2;
-		}
-
-	ctx->h[0] += a;	ctx->h[1] += b;	ctx->h[2] += c;	ctx->h[3] += d;
-	ctx->h[4] += e;	ctx->h[5] += f;	ctx->h[6] += g;	ctx->h[7] += h;
-
-			}
-}
-
-#else
-
-#define	ROUND_00_15(i,a,b,c,d,e,f,g,h)		do {	\
-	T1 += h + Sigma1(e) + Ch(e,f,g) + K256[i];	\
-	h = Sigma0(a) + Maj(a,b,c);			\
-	d += T1;	h += T1;		} while (0)
-
-#define	ROUND_16_63(i,a,b,c,d,e,f,g,h,X)	do {	\
-	s0 = X[(i+1)&0x0f];	s0 = sigma0(s0);	\
-	s1 = X[(i+14)&0x0f];	s1 = sigma1(s1);	\
-	T1 = X[(i)&0x0f] += s0 + s1 + X[(i+9)&0x0f];	\
-	ROUND_00_15(i,a,b,c,d,e,f,g,h);		} while (0)
-
-static void sha256_block (SHA256_CTX *ctx, const void *in, size_t num, int host)
-	{
-	unsigned MD32_REG_T a,b,c,d,e,f,g,h,s0,s1,T1;
-	SHA_LONG	X[16];
-	int i;
-	const unsigned char *data=in;
-
-			while (num--) {
-
-	a = ctx->h[0];	b = ctx->h[1];	c = ctx->h[2];	d = ctx->h[3];
-	e = ctx->h[4];	f = ctx->h[5];	g = ctx->h[6];	h = ctx->h[7];
-
-	if (host)
-		{
-		const SHA_LONG *W=(const SHA_LONG *)data;
-
-		T1 = X[0] = W[0];	ROUND_00_15(0,a,b,c,d,e,f,g,h);
-		T1 = X[1] = W[1];	ROUND_00_15(1,h,a,b,c,d,e,f,g);
-		T1 = X[2] = W[2];	ROUND_00_15(2,g,h,a,b,c,d,e,f);
-		T1 = X[3] = W[3];	ROUND_00_15(3,f,g,h,a,b,c,d,e);
-		T1 = X[4] = W[4];	ROUND_00_15(4,e,f,g,h,a,b,c,d);
-		T1 = X[5] = W[5];	ROUND_00_15(5,d,e,f,g,h,a,b,c);
-		T1 = X[6] = W[6];	ROUND_00_15(6,c,d,e,f,g,h,a,b);
-		T1 = X[7] = W[7];	ROUND_00_15(7,b,c,d,e,f,g,h,a);
-		T1 = X[8] = W[8];	ROUND_00_15(8,a,b,c,d,e,f,g,h);
-		T1 = X[9] = W[9];	ROUND_00_15(9,h,a,b,c,d,e,f,g);
-		T1 = X[10] = W[10];	ROUND_00_15(10,g,h,a,b,c,d,e,f);
-		T1 = X[11] = W[11];	ROUND_00_15(11,f,g,h,a,b,c,d,e);
-		T1 = X[12] = W[12];	ROUND_00_15(12,e,f,g,h,a,b,c,d);
-		T1 = X[13] = W[13];	ROUND_00_15(13,d,e,f,g,h,a,b,c);
-		T1 = X[14] = W[14];	ROUND_00_15(14,c,d,e,f,g,h,a,b);
-		T1 = X[15] = W[15];	ROUND_00_15(15,b,c,d,e,f,g,h,a);
-
-		data += SHA256_CBLOCK;
-		}
-	else
-		{
-		SHA_LONG l;
-
-		HOST_c2l(data,l); T1 = X[0] = l;  ROUND_00_15(0,a,b,c,d,e,f,g,h);
-		HOST_c2l(data,l); T1 = X[1] = l;  ROUND_00_15(1,h,a,b,c,d,e,f,g);
-		HOST_c2l(data,l); T1 = X[2] = l;  ROUND_00_15(2,g,h,a,b,c,d,e,f);
-		HOST_c2l(data,l); T1 = X[3] = l;  ROUND_00_15(3,f,g,h,a,b,c,d,e);
-		HOST_c2l(data,l); T1 = X[4] = l;  ROUND_00_15(4,e,f,g,h,a,b,c,d);
-		HOST_c2l(data,l); T1 = X[5] = l;  ROUND_00_15(5,d,e,f,g,h,a,b,c);
-		HOST_c2l(data,l); T1 = X[6] = l;  ROUND_00_15(6,c,d,e,f,g,h,a,b);
-		HOST_c2l(data,l); T1 = X[7] = l;  ROUND_00_15(7,b,c,d,e,f,g,h,a);
-		HOST_c2l(data,l); T1 = X[8] = l;  ROUND_00_15(8,a,b,c,d,e,f,g,h);
-		HOST_c2l(data,l); T1 = X[9] = l;  ROUND_00_15(9,h,a,b,c,d,e,f,g);
-		HOST_c2l(data,l); T1 = X[10] = l; ROUND_00_15(10,g,h,a,b,c,d,e,f);
-		HOST_c2l(data,l); T1 = X[11] = l; ROUND_00_15(11,f,g,h,a,b,c,d,e);
-		HOST_c2l(data,l); T1 = X[12] = l; ROUND_00_15(12,e,f,g,h,a,b,c,d);
-		HOST_c2l(data,l); T1 = X[13] = l; ROUND_00_15(13,d,e,f,g,h,a,b,c);
-		HOST_c2l(data,l); T1 = X[14] = l; ROUND_00_15(14,c,d,e,f,g,h,a,b);
-		HOST_c2l(data,l); T1 = X[15] = l; ROUND_00_15(15,b,c,d,e,f,g,h,a);
-		}
-
-	for (i=16;i<64;i+=8)
-		{
-		ROUND_16_63(i+0,a,b,c,d,e,f,g,h,X);
-		ROUND_16_63(i+1,h,a,b,c,d,e,f,g,X);
-		ROUND_16_63(i+2,g,h,a,b,c,d,e,f,X);
-		ROUND_16_63(i+3,f,g,h,a,b,c,d,e,X);
-		ROUND_16_63(i+4,e,f,g,h,a,b,c,d,X);
-		ROUND_16_63(i+5,d,e,f,g,h,a,b,c,X);
-		ROUND_16_63(i+6,c,d,e,f,g,h,a,b,X);
-		ROUND_16_63(i+7,b,c,d,e,f,g,h,a,X);
-		}
-
-	ctx->h[0] += a;	ctx->h[1] += b;	ctx->h[2] += c;	ctx->h[3] += d;
-	ctx->h[4] += e;	ctx->h[5] += f;	ctx->h[6] += g;	ctx->h[7] += h;
-
-			}
-	}
-
-#endif
-#endif /* SHA256_ASM */
-
-/*
- * Idea is to trade couple of cycles for some space. On IA-32 we save
- * about 4K in "big footprint" case. In "small footprint" case any gain
- * is appreciated:-)
- */
-void HASH_BLOCK_HOST_ORDER (SHA256_CTX *ctx, const void *in, size_t num)
-{   sha256_block (ctx,in,num,1);   }
-
-void HASH_BLOCK_DATA_ORDER (SHA256_CTX *ctx, const void *in, size_t num)
-{   sha256_block (ctx,in,num,0);   }
-
-#endif /* OPENSSL_NO_SHA256 */
diff --git a/crypto/openssl/crypto/sha/sha256t.c b/crypto/openssl/crypto/sha/sha256t.c
deleted file mode 100644
index 6b4a3bd001ba..000000000000
--- a/crypto/openssl/crypto/sha/sha256t.c
+++ /dev/null
@@ -1,147 +0,0 @@
-/* crypto/sha/sha256t.c */
-/* ====================================================================
- * Copyright (c) 2004 The OpenSSL Project.  All rights reserved.
- * ====================================================================
- */
-#include <stdio.h>
-#include <string.h>
-#include <stdlib.h>
-
-#include <openssl/sha.h>
-#include <openssl/evp.h>
-
-#if defined(OPENSSL_NO_SHA) || defined(OPENSSL_NO_SHA256)
-int main(int argc, char *argv[])
-{
-    printf("No SHA256 support\n");
-    return(0);
-}
-#else
-
-unsigned char app_b1[SHA256_DIGEST_LENGTH] = {
-	0xba,0x78,0x16,0xbf,0x8f,0x01,0xcf,0xea,
-	0x41,0x41,0x40,0xde,0x5d,0xae,0x22,0x23,
-	0xb0,0x03,0x61,0xa3,0x96,0x17,0x7a,0x9c,
-	0xb4,0x10,0xff,0x61,0xf2,0x00,0x15,0xad	};
-
-unsigned char app_b2[SHA256_DIGEST_LENGTH] = {
-	0x24,0x8d,0x6a,0x61,0xd2,0x06,0x38,0xb8,
-	0xe5,0xc0,0x26,0x93,0x0c,0x3e,0x60,0x39,
-	0xa3,0x3c,0xe4,0x59,0x64,0xff,0x21,0x67,
-	0xf6,0xec,0xed,0xd4,0x19,0xdb,0x06,0xc1	};
-
-unsigned char app_b3[SHA256_DIGEST_LENGTH] = {
-	0xcd,0xc7,0x6e,0x5c,0x99,0x14,0xfb,0x92,
-	0x81,0xa1,0xc7,0xe2,0x84,0xd7,0x3e,0x67,
-	0xf1,0x80,0x9a,0x48,0xa4,0x97,0x20,0x0e,
-	0x04,0x6d,0x39,0xcc,0xc7,0x11,0x2c,0xd0	};
-
-unsigned char addenum_1[SHA224_DIGEST_LENGTH] = {
-	0x23,0x09,0x7d,0x22,0x34,0x05,0xd8,0x22,
-	0x86,0x42,0xa4,0x77,0xbd,0xa2,0x55,0xb3,
-	0x2a,0xad,0xbc,0xe4,0xbd,0xa0,0xb3,0xf7,
-	0xe3,0x6c,0x9d,0xa7 };
-
-unsigned char addenum_2[SHA224_DIGEST_LENGTH] = {
-	0x75,0x38,0x8b,0x16,0x51,0x27,0x76,0xcc,
-	0x5d,0xba,0x5d,0xa1,0xfd,0x89,0x01,0x50,
-	0xb0,0xc6,0x45,0x5c,0xb4,0xf5,0x8b,0x19,
-	0x52,0x52,0x25,0x25 };
-
-unsigned char addenum_3[SHA224_DIGEST_LENGTH] = {
-	0x20,0x79,0x46,0x55,0x98,0x0c,0x91,0xd8,
-	0xbb,0xb4,0xc1,0xea,0x97,0x61,0x8a,0x4b,
-	0xf0,0x3f,0x42,0x58,0x19,0x48,0xb2,0xee,
-	0x4e,0xe7,0xad,0x67 };
-
-int main (int argc,char **argv)
-{ unsigned char md[SHA256_DIGEST_LENGTH];
-  int		i;
-  EVP_MD_CTX	evp;
-
-    fprintf(stdout,"Testing SHA-256 ");
-
-    EVP_Digest ("abc",3,md,NULL,EVP_sha256(),NULL);
-    if (memcmp(md,app_b1,sizeof(app_b1)))
-    {	fflush(stdout);
-	fprintf(stderr,"\nTEST 1 of 3 failed.\n");
-	return 1;
-    }
-    else
-	fprintf(stdout,"."); fflush(stdout);
-
-    EVP_Digest ("abcdbcde""cdefdefg""efghfghi""ghijhijk"
-		"ijkljklm""klmnlmno""mnopnopq",56,md,NULL,EVP_sha256(),NULL);
-    if (memcmp(md,app_b2,sizeof(app_b2)))
-    {	fflush(stdout);
-	fprintf(stderr,"\nTEST 2 of 3 failed.\n");
-	return 1;
-    }
-    else
-	fprintf(stdout,"."); fflush(stdout);
-
-    EVP_MD_CTX_init (&evp);
-    EVP_DigestInit_ex (&evp,EVP_sha256(),NULL);
-    for (i=0;i<1000000;i+=160)
-	EVP_DigestUpdate (&evp,	"aaaaaaaa""aaaaaaaa""aaaaaaaa""aaaaaaaa"
-				"aaaaaaaa""aaaaaaaa""aaaaaaaa""aaaaaaaa"
-				"aaaaaaaa""aaaaaaaa""aaaaaaaa""aaaaaaaa"
-				"aaaaaaaa""aaaaaaaa""aaaaaaaa""aaaaaaaa"
-				"aaaaaaaa""aaaaaaaa""aaaaaaaa""aaaaaaaa",
-				(1000000-i)<160?1000000-i:160);
-    EVP_DigestFinal_ex (&evp,md,NULL);
-    EVP_MD_CTX_cleanup (&evp);
-
-    if (memcmp(md,app_b3,sizeof(app_b3)))
-    {	fflush(stdout);
-	fprintf(stderr,"\nTEST 3 of 3 failed.\n");
-	return 1;
-    }
-    else
-	fprintf(stdout,"."); fflush(stdout);
-
-    fprintf(stdout," passed.\n"); fflush(stdout);
-
-    fprintf(stdout,"Testing SHA-224 ");
-
-    EVP_Digest ("abc",3,md,NULL,EVP_sha224(),NULL);
-    if (memcmp(md,addenum_1,sizeof(addenum_1)))
-    {	fflush(stdout);
-	fprintf(stderr,"\nTEST 1 of 3 failed.\n");
-	return 1;
-    }
-    else
-	fprintf(stdout,"."); fflush(stdout);
-
-    EVP_Digest ("abcdbcde""cdefdefg""efghfghi""ghijhijk"
-		"ijkljklm""klmnlmno""mnopnopq",56,md,NULL,EVP_sha224(),NULL);
-    if (memcmp(md,addenum_2,sizeof(addenum_2)))
-    {	fflush(stdout);
-	fprintf(stderr,"\nTEST 2 of 3 failed.\n");
-	return 1;
-    }
-    else
-	fprintf(stdout,"."); fflush(stdout);
-
-    EVP_MD_CTX_init (&evp);
-    EVP_DigestInit_ex (&evp,EVP_sha224(),NULL);
-    for (i=0;i<1000000;i+=64)
-	EVP_DigestUpdate (&evp,	"aaaaaaaa""aaaaaaaa""aaaaaaaa""aaaaaaaa"
-				"aaaaaaaa""aaaaaaaa""aaaaaaaa""aaaaaaaa",
-				(1000000-i)<64?1000000-i:64);
-    EVP_DigestFinal_ex (&evp,md,NULL);
-    EVP_MD_CTX_cleanup (&evp);
-
-    if (memcmp(md,addenum_3,sizeof(addenum_3)))
-    {	fflush(stdout);
-	fprintf(stderr,"\nTEST 3 of 3 failed.\n");
-	return 1;
-    }
-    else
-	fprintf(stdout,"."); fflush(stdout);
-
-    fprintf(stdout," passed.\n"); fflush(stdout);
-
-  return 0;
-}
-#endif
diff --git a/crypto/openssl/crypto/sha/sha512.c b/crypto/openssl/crypto/sha/sha512.c
deleted file mode 100644
index 39d18b8fb46e..000000000000
--- a/crypto/openssl/crypto/sha/sha512.c
+++ /dev/null
@@ -1,496 +0,0 @@
-/* crypto/sha/sha512.c */
-/* ====================================================================
- * Copyright (c) 2004 The OpenSSL Project.  All rights reserved
- * according to the OpenSSL license [found in ../../LICENSE].
- * ====================================================================
- */
-#include <openssl/opensslconf.h>
-#if !defined(OPENSSL_NO_SHA) && !defined(OPENSSL_NO_SHA512)
-/*
- * IMPLEMENTATION NOTES.
- *
- * As you might have noticed 32-bit hash algorithms:
- *
- * - permit SHA_LONG to be wider than 32-bit (case on CRAY);
- * - optimized versions implement two transform functions: one operating
- *   on [aligned] data in host byte order and one - on data in input
- *   stream byte order;
- * - share common byte-order neutral collector and padding function
- *   implementations, ../md32_common.h;
- *
- * Neither of the above applies to this SHA-512 implementations. Reasons
- * [in reverse order] are:
- *
- * - it's the only 64-bit hash algorithm for the moment of this writing,
- *   there is no need for common collector/padding implementation [yet];
- * - by supporting only one transform function [which operates on
- *   *aligned* data in input stream byte order, big-endian in this case]
- *   we minimize burden of maintenance in two ways: a) collector/padding
- *   function is simpler; b) only one transform function to stare at;
- * - SHA_LONG64 is required to be exactly 64-bit in order to be able to
- *   apply a number of optimizations to mitigate potential performance
- *   penalties caused by previous design decision;
- *
- * Caveat lector.
- *
- * Implementation relies on the fact that "long long" is 64-bit on
- * both 32- and 64-bit platforms. If some compiler vendor comes up
- * with 128-bit long long, adjustment to sha.h would be required.
- * As this implementation relies on 64-bit integer type, it's totally
- * inappropriate for platforms which don't support it, most notably
- * 16-bit platforms.
- *					<appro@fy.chalmers.se>
- */
-#include <stdlib.h>
-#include <string.h>
-
-#include <openssl/crypto.h>
-#include <openssl/sha.h>
-#include <openssl/opensslv.h>
-
-#include "cryptlib.h"
-
-const char SHA512_version[]="SHA-512" OPENSSL_VERSION_PTEXT;
-
-#if defined(_M_IX86) || defined(_M_AMD64) || defined(__i386) || defined(__x86_64)
-#define SHA512_BLOCK_CAN_MANAGE_UNALIGNED_DATA
-#endif
-
-int SHA384_Init (SHA512_CTX *c)
-	{
-	c->h[0]=U64(0xcbbb9d5dc1059ed8);
-	c->h[1]=U64(0x629a292a367cd507);
-	c->h[2]=U64(0x9159015a3070dd17);
-	c->h[3]=U64(0x152fecd8f70e5939);
-	c->h[4]=U64(0x67332667ffc00b31);
-	c->h[5]=U64(0x8eb44a8768581511);
-	c->h[6]=U64(0xdb0c2e0d64f98fa7);
-	c->h[7]=U64(0x47b5481dbefa4fa4);
-        c->Nl=0;        c->Nh=0;
-        c->num=0;       c->md_len=SHA384_DIGEST_LENGTH;
-        return 1;
-	}
-
-int SHA512_Init (SHA512_CTX *c)
-	{
-	c->h[0]=U64(0x6a09e667f3bcc908);
-	c->h[1]=U64(0xbb67ae8584caa73b);
-	c->h[2]=U64(0x3c6ef372fe94f82b);
-	c->h[3]=U64(0xa54ff53a5f1d36f1);
-	c->h[4]=U64(0x510e527fade682d1);
-	c->h[5]=U64(0x9b05688c2b3e6c1f);
-	c->h[6]=U64(0x1f83d9abfb41bd6b);
-	c->h[7]=U64(0x5be0cd19137e2179);
-        c->Nl=0;        c->Nh=0;
-        c->num=0;       c->md_len=SHA512_DIGEST_LENGTH;
-        return 1;
-	}
-
-#ifndef SHA512_ASM
-static
-#endif
-void sha512_block (SHA512_CTX *ctx, const void *in, size_t num);
-
-int SHA512_Final (unsigned char *md, SHA512_CTX *c)
-	{
-	unsigned char *p=(unsigned char *)c->u.p;
-	size_t n=c->num;
-
-	p[n]=0x80;	/* There always is a room for one */
-	n++;
-	if (n > (sizeof(c->u)-16))
-		memset (p+n,0,sizeof(c->u)-n), n=0,
-		sha512_block (c,p,1);
-
-	memset (p+n,0,sizeof(c->u)-16-n);
-#ifdef	B_ENDIAN
-	c->u.d[SHA_LBLOCK-2] = c->Nh;
-	c->u.d[SHA_LBLOCK-1] = c->Nl;
-#else
-	p[sizeof(c->u)-1]  = (unsigned char)(c->Nl);
-	p[sizeof(c->u)-2]  = (unsigned char)(c->Nl>>8);
-	p[sizeof(c->u)-3]  = (unsigned char)(c->Nl>>16);
-	p[sizeof(c->u)-4]  = (unsigned char)(c->Nl>>24);
-	p[sizeof(c->u)-5]  = (unsigned char)(c->Nl>>32);
-	p[sizeof(c->u)-6]  = (unsigned char)(c->Nl>>40);
-	p[sizeof(c->u)-7]  = (unsigned char)(c->Nl>>48);
-	p[sizeof(c->u)-8]  = (unsigned char)(c->Nl>>56);
-	p[sizeof(c->u)-9]  = (unsigned char)(c->Nh);
-	p[sizeof(c->u)-10] = (unsigned char)(c->Nh>>8);
-	p[sizeof(c->u)-11] = (unsigned char)(c->Nh>>16);
-	p[sizeof(c->u)-12] = (unsigned char)(c->Nh>>24);
-	p[sizeof(c->u)-13] = (unsigned char)(c->Nh>>32);
-	p[sizeof(c->u)-14] = (unsigned char)(c->Nh>>40);
-	p[sizeof(c->u)-15] = (unsigned char)(c->Nh>>48);
-	p[sizeof(c->u)-16] = (unsigned char)(c->Nh>>56);
-#endif
-
-	sha512_block (c,p,1);
-
-	if (md==0) return 0;
-
-	switch (c->md_len)
-		{
-		/* Let compiler decide if it's appropriate to unroll... */
-		case SHA384_DIGEST_LENGTH:
-			for (n=0;n<SHA384_DIGEST_LENGTH/8;n++)
-				{
-				SHA_LONG64 t = c->h[n];
-
-				*(md++)	= (unsigned char)(t>>56);
-				*(md++)	= (unsigned char)(t>>48);
-				*(md++)	= (unsigned char)(t>>40);
-				*(md++)	= (unsigned char)(t>>32);
-				*(md++)	= (unsigned char)(t>>24);
-				*(md++)	= (unsigned char)(t>>16);
-				*(md++)	= (unsigned char)(t>>8);
-				*(md++)	= (unsigned char)(t);
-				}
-			break;
-		case SHA512_DIGEST_LENGTH:
-			for (n=0;n<SHA512_DIGEST_LENGTH/8;n++)
-				{
-				SHA_LONG64 t = c->h[n];
-
-				*(md++)	= (unsigned char)(t>>56);
-				*(md++)	= (unsigned char)(t>>48);
-				*(md++)	= (unsigned char)(t>>40);
-				*(md++)	= (unsigned char)(t>>32);
-				*(md++)	= (unsigned char)(t>>24);
-				*(md++)	= (unsigned char)(t>>16);
-				*(md++)	= (unsigned char)(t>>8);
-				*(md++)	= (unsigned char)(t);
-				}
-			break;
-		/* ... as well as make sure md_len is not abused. */
-		default:	return 0;
-		}
-
-	return 1;
-	}
-
-int SHA384_Final (unsigned char *md,SHA512_CTX *c)
-{   return SHA512_Final (md,c);   }
-
-int SHA512_Update (SHA512_CTX *c, const void *_data, size_t len)
-	{
-	SHA_LONG64	l;
-	unsigned char  *p=c->u.p;
-	const unsigned char *data=(const unsigned char *)_data;
-
-	if (len==0) return  1;
-
-	l = (c->Nl+(((SHA_LONG64)len)<<3))&U64(0xffffffffffffffff);
-	if (l < c->Nl)		c->Nh++;
-	if (sizeof(len)>=8)	c->Nh+=(((SHA_LONG64)len)>>61);
-	c->Nl=l;
-
-	if (c->num != 0)
-		{
-		size_t n = sizeof(c->u) - c->num;
-
-		if (len < n)
-			{
-			memcpy (p+c->num,data,len), c->num += len;
-			return 1;
-			}
-		else	{
-			memcpy (p+c->num,data,n), c->num = 0;
-			len-=n, data+=n;
-			sha512_block (c,p,1);
-			}
-		}
-
-	if (len >= sizeof(c->u))
-		{
-#ifndef SHA512_BLOCK_CAN_MANAGE_UNALIGNED_DATA
-		if ((size_t)data%sizeof(c->u.d[0]) != 0)
-			while (len >= sizeof(c->u))
-				memcpy (p,data,sizeof(c->u)),
-				sha512_block (c,p,1),
-				len  -= sizeof(c->u),
-				data += sizeof(c->u);
-		else
-#endif
-			sha512_block (c,data,len/sizeof(c->u)),
-			data += len,
-			len  %= sizeof(c->u),
-			data -= len;
-		}
-
-	if (len != 0)	memcpy (p,data,len), c->num = (int)len;
-
-	return 1;
-	}
-
-int SHA384_Update (SHA512_CTX *c, const void *data, size_t len)
-{   return SHA512_Update (c,data,len);   }
-
-void SHA512_Transform (SHA512_CTX *c, const unsigned char *data)
-{   sha512_block (c,data,1);  }
-
-unsigned char *SHA384(const unsigned char *d, size_t n, unsigned char *md)
-	{
-	SHA512_CTX c;
-	static unsigned char m[SHA384_DIGEST_LENGTH];
-
-	if (md == NULL) md=m;
-	SHA384_Init(&c);
-	SHA512_Update(&c,d,n);
-	SHA512_Final(md,&c);
-	OPENSSL_cleanse(&c,sizeof(c));
-	return(md);
-	}
-
-unsigned char *SHA512(const unsigned char *d, size_t n, unsigned char *md)
-	{
-	SHA512_CTX c;
-	static unsigned char m[SHA512_DIGEST_LENGTH];
-
-	if (md == NULL) md=m;
-	SHA512_Init(&c);
-	SHA512_Update(&c,d,n);
-	SHA512_Final(md,&c);
-	OPENSSL_cleanse(&c,sizeof(c));
-	return(md);
-	}
-
-#ifndef SHA512_ASM
-static const SHA_LONG64 K512[80] = {
-        U64(0x428a2f98d728ae22),U64(0x7137449123ef65cd),
-        U64(0xb5c0fbcfec4d3b2f),U64(0xe9b5dba58189dbbc),
-        U64(0x3956c25bf348b538),U64(0x59f111f1b605d019),
-        U64(0x923f82a4af194f9b),U64(0xab1c5ed5da6d8118),
-        U64(0xd807aa98a3030242),U64(0x12835b0145706fbe),
-        U64(0x243185be4ee4b28c),U64(0x550c7dc3d5ffb4e2),
-        U64(0x72be5d74f27b896f),U64(0x80deb1fe3b1696b1),
-        U64(0x9bdc06a725c71235),U64(0xc19bf174cf692694),
-        U64(0xe49b69c19ef14ad2),U64(0xefbe4786384f25e3),
-        U64(0x0fc19dc68b8cd5b5),U64(0x240ca1cc77ac9c65),
-        U64(0x2de92c6f592b0275),U64(0x4a7484aa6ea6e483),
-        U64(0x5cb0a9dcbd41fbd4),U64(0x76f988da831153b5),
-        U64(0x983e5152ee66dfab),U64(0xa831c66d2db43210),
-        U64(0xb00327c898fb213f),U64(0xbf597fc7beef0ee4),
-        U64(0xc6e00bf33da88fc2),U64(0xd5a79147930aa725),
-        U64(0x06ca6351e003826f),U64(0x142929670a0e6e70),
-        U64(0x27b70a8546d22ffc),U64(0x2e1b21385c26c926),
-        U64(0x4d2c6dfc5ac42aed),U64(0x53380d139d95b3df),
-        U64(0x650a73548baf63de),U64(0x766a0abb3c77b2a8),
-        U64(0x81c2c92e47edaee6),U64(0x92722c851482353b),
-        U64(0xa2bfe8a14cf10364),U64(0xa81a664bbc423001),
-        U64(0xc24b8b70d0f89791),U64(0xc76c51a30654be30),
-        U64(0xd192e819d6ef5218),U64(0xd69906245565a910),
-        U64(0xf40e35855771202a),U64(0x106aa07032bbd1b8),
-        U64(0x19a4c116b8d2d0c8),U64(0x1e376c085141ab53),
-        U64(0x2748774cdf8eeb99),U64(0x34b0bcb5e19b48a8),
-        U64(0x391c0cb3c5c95a63),U64(0x4ed8aa4ae3418acb),
-        U64(0x5b9cca4f7763e373),U64(0x682e6ff3d6b2b8a3),
-        U64(0x748f82ee5defb2fc),U64(0x78a5636f43172f60),
-        U64(0x84c87814a1f0ab72),U64(0x8cc702081a6439ec),
-        U64(0x90befffa23631e28),U64(0xa4506cebde82bde9),
-        U64(0xbef9a3f7b2c67915),U64(0xc67178f2e372532b),
-        U64(0xca273eceea26619c),U64(0xd186b8c721c0c207),
-        U64(0xeada7dd6cde0eb1e),U64(0xf57d4f7fee6ed178),
-        U64(0x06f067aa72176fba),U64(0x0a637dc5a2c898a6),
-        U64(0x113f9804bef90dae),U64(0x1b710b35131c471b),
-        U64(0x28db77f523047d84),U64(0x32caab7b40c72493),
-        U64(0x3c9ebe0a15c9bebc),U64(0x431d67c49c100d4c),
-        U64(0x4cc5d4becb3e42b6),U64(0x597f299cfc657e2a),
-        U64(0x5fcb6fab3ad6faec),U64(0x6c44198c4a475817) };
-
-#ifndef PEDANTIC
-# if defined(__GNUC__) && __GNUC__>=2 && !defined(OPENSSL_NO_ASM) && !defined(OPENSSL_NO_INLINE_ASM)
-#  if defined(__x86_64) || defined(__x86_64__)
-#   define PULL64(x) ({ SHA_LONG64 ret=*((const SHA_LONG64 *)(&(x)));	\
-				asm ("bswapq	%0"		\
-				: "=r"(ret)			\
-				: "0"(ret)); ret;		})
-#  endif
-# endif
-#endif
-
-#ifndef PULL64
-#define B(x,j)    (((SHA_LONG64)(*(((const unsigned char *)(&x))+j)))<<((7-j)*8))
-#define PULL64(x) (B(x,0)|B(x,1)|B(x,2)|B(x,3)|B(x,4)|B(x,5)|B(x,6)|B(x,7))
-#endif
-
-#ifndef PEDANTIC
-# if defined(_MSC_VER)
-#  if defined(_WIN64)	/* applies to both IA-64 and AMD64 */
-#   define ROTR(a,n)	_rotr64((a),n)
-#  endif
-# elif defined(__GNUC__) && __GNUC__>=2 && !defined(OPENSSL_NO_ASM) && !defined(OPENSSL_NO_INLINE_ASM)
-#  if defined(__x86_64) || defined(__x86_64__)
-#   define ROTR(a,n)	({ unsigned long ret;		\
-				asm ("rorq %1,%0"	\
-				: "=r"(ret)		\
-				: "J"(n),"0"(a)		\
-				: "cc"); ret;		})
-#  elif defined(_ARCH_PPC) && defined(__64BIT__)
-#   define ROTR(a,n)	({ unsigned long ret;		\
-				asm ("rotrdi %0,%1,%2"	\
-				: "=r"(ret)		\
-				: "r"(a),"K"(n)); ret;	})
-#  endif
-# endif
-#endif
-
-#ifndef ROTR
-#define ROTR(x,s)	(((x)>>s) | (x)<<(64-s))
-#endif
-
-#define Sigma0(x)	(ROTR((x),28) ^ ROTR((x),34) ^ ROTR((x),39))
-#define Sigma1(x)	(ROTR((x),14) ^ ROTR((x),18) ^ ROTR((x),41))
-#define sigma0(x)	(ROTR((x),1)  ^ ROTR((x),8)  ^ ((x)>>7))
-#define sigma1(x)	(ROTR((x),19) ^ ROTR((x),61) ^ ((x)>>6))
-
-#define Ch(x,y,z)	(((x) & (y)) ^ ((~(x)) & (z)))
-#define Maj(x,y,z)	(((x) & (y)) ^ ((x) & (z)) ^ ((y) & (z)))
-
-#if defined(OPENSSL_IA32_SSE2) && !defined(OPENSSL_NO_ASM) && !defined(I386_ONLY)
-#define	GO_FOR_SSE2(ctx,in,num)		do {		\
-	void	sha512_block_sse2(void *,const void *,size_t);	\
-	if (!(OPENSSL_ia32cap_P & (1<<26))) break;	\
-	sha512_block_sse2(ctx->h,in,num); return;	\
-					} while (0)
-#endif
-
-#ifdef OPENSSL_SMALL_FOOTPRINT
-
-static void sha512_block (SHA512_CTX *ctx, const void *in, size_t num)
-	{
-	const SHA_LONG64 *W=in;
-	SHA_LONG64	a,b,c,d,e,f,g,h,s0,s1,T1,T2;
-	SHA_LONG64	X[16];
-	int i;
-
-#ifdef GO_FOR_SSE2
-	GO_FOR_SSE2(ctx,in,num);
-#endif
-
-			while (num--) {
-
-	a = ctx->h[0];	b = ctx->h[1];	c = ctx->h[2];	d = ctx->h[3];
-	e = ctx->h[4];	f = ctx->h[5];	g = ctx->h[6];	h = ctx->h[7];
-
-	for (i=0;i<16;i++)
-		{
-#ifdef B_ENDIAN
-		T1 = X[i] = W[i];
-#else
-		T1 = X[i] = PULL64(W[i]);
-#endif
-		T1 += h + Sigma1(e) + Ch(e,f,g) + K512[i];
-		T2 = Sigma0(a) + Maj(a,b,c);
-		h = g;	g = f;	f = e;	e = d + T1;
-		d = c;	c = b;	b = a;	a = T1 + T2;
-		}
-
-	for (;i<80;i++)
-		{
-		s0 = X[(i+1)&0x0f];	s0 = sigma0(s0);
-		s1 = X[(i+14)&0x0f];	s1 = sigma1(s1);
-
-		T1 = X[i&0xf] += s0 + s1 + X[(i+9)&0xf];
-		T1 += h + Sigma1(e) + Ch(e,f,g) + K512[i];
-		T2 = Sigma0(a) + Maj(a,b,c);
-		h = g;	g = f;	f = e;	e = d + T1;
-		d = c;	c = b;	b = a;	a = T1 + T2;
-		}
-
-	ctx->h[0] += a;	ctx->h[1] += b;	ctx->h[2] += c;	ctx->h[3] += d;
-	ctx->h[4] += e;	ctx->h[5] += f;	ctx->h[6] += g;	ctx->h[7] += h;
-
-			W+=SHA_LBLOCK;
-			}
-	}
-
-#else
-
-#define	ROUND_00_15(i,a,b,c,d,e,f,g,h)		do {	\
-	T1 += h + Sigma1(e) + Ch(e,f,g) + K512[i];	\
-	h = Sigma0(a) + Maj(a,b,c);			\
-	d += T1;	h += T1;		} while (0)
-
-#define	ROUND_16_80(i,a,b,c,d,e,f,g,h,X)	do {	\
-	s0 = X[(i+1)&0x0f];	s0 = sigma0(s0);	\
-	s1 = X[(i+14)&0x0f];	s1 = sigma1(s1);	\
-	T1 = X[(i)&0x0f] += s0 + s1 + X[(i+9)&0x0f];	\
-	ROUND_00_15(i,a,b,c,d,e,f,g,h);		} while (0)
-
-static void sha512_block (SHA512_CTX *ctx, const void *in, size_t num)
-	{
-	const SHA_LONG64 *W=in;
-	SHA_LONG64	a,b,c,d,e,f,g,h,s0,s1,T1;
-	SHA_LONG64	X[16];
-	int i;
-
-#ifdef GO_FOR_SSE2
-	GO_FOR_SSE2(ctx,in,num);
-#endif
-
-			while (num--) {
-
-	a = ctx->h[0];	b = ctx->h[1];	c = ctx->h[2];	d = ctx->h[3];
-	e = ctx->h[4];	f = ctx->h[5];	g = ctx->h[6];	h = ctx->h[7];
-
-#ifdef B_ENDIAN
-	T1 = X[0] = W[0];	ROUND_00_15(0,a,b,c,d,e,f,g,h);
-	T1 = X[1] = W[1];	ROUND_00_15(1,h,a,b,c,d,e,f,g);
-	T1 = X[2] = W[2];	ROUND_00_15(2,g,h,a,b,c,d,e,f);
-	T1 = X[3] = W[3];	ROUND_00_15(3,f,g,h,a,b,c,d,e);
-	T1 = X[4] = W[4];	ROUND_00_15(4,e,f,g,h,a,b,c,d);
-	T1 = X[5] = W[5];	ROUND_00_15(5,d,e,f,g,h,a,b,c);
-	T1 = X[6] = W[6];	ROUND_00_15(6,c,d,e,f,g,h,a,b);
-	T1 = X[7] = W[7];	ROUND_00_15(7,b,c,d,e,f,g,h,a);
-	T1 = X[8] = W[8];	ROUND_00_15(8,a,b,c,d,e,f,g,h);
-	T1 = X[9] = W[9];	ROUND_00_15(9,h,a,b,c,d,e,f,g);
-	T1 = X[10] = W[10];	ROUND_00_15(10,g,h,a,b,c,d,e,f);
-	T1 = X[11] = W[11];	ROUND_00_15(11,f,g,h,a,b,c,d,e);
-	T1 = X[12] = W[12];	ROUND_00_15(12,e,f,g,h,a,b,c,d);
-	T1 = X[13] = W[13];	ROUND_00_15(13,d,e,f,g,h,a,b,c);
-	T1 = X[14] = W[14];	ROUND_00_15(14,c,d,e,f,g,h,a,b);
-	T1 = X[15] = W[15];	ROUND_00_15(15,b,c,d,e,f,g,h,a);
-#else
-	T1 = X[0]  = PULL64(W[0]);	ROUND_00_15(0,a,b,c,d,e,f,g,h);
-	T1 = X[1]  = PULL64(W[1]);	ROUND_00_15(1,h,a,b,c,d,e,f,g);
-	T1 = X[2]  = PULL64(W[2]);	ROUND_00_15(2,g,h,a,b,c,d,e,f);
-	T1 = X[3]  = PULL64(W[3]);	ROUND_00_15(3,f,g,h,a,b,c,d,e);
-	T1 = X[4]  = PULL64(W[4]);	ROUND_00_15(4,e,f,g,h,a,b,c,d);
-	T1 = X[5]  = PULL64(W[5]);	ROUND_00_15(5,d,e,f,g,h,a,b,c);
-	T1 = X[6]  = PULL64(W[6]);	ROUND_00_15(6,c,d,e,f,g,h,a,b);
-	T1 = X[7]  = PULL64(W[7]);	ROUND_00_15(7,b,c,d,e,f,g,h,a);
-	T1 = X[8]  = PULL64(W[8]);	ROUND_00_15(8,a,b,c,d,e,f,g,h);
-	T1 = X[9]  = PULL64(W[9]);	ROUND_00_15(9,h,a,b,c,d,e,f,g);
-	T1 = X[10] = PULL64(W[10]);	ROUND_00_15(10,g,h,a,b,c,d,e,f);
-	T1 = X[11] = PULL64(W[11]);	ROUND_00_15(11,f,g,h,a,b,c,d,e);
-	T1 = X[12] = PULL64(W[12]);	ROUND_00_15(12,e,f,g,h,a,b,c,d);
-	T1 = X[13] = PULL64(W[13]);	ROUND_00_15(13,d,e,f,g,h,a,b,c);
-	T1 = X[14] = PULL64(W[14]);	ROUND_00_15(14,c,d,e,f,g,h,a,b);
-	T1 = X[15] = PULL64(W[15]);	ROUND_00_15(15,b,c,d,e,f,g,h,a);
-#endif
-
-	for (i=16;i<80;i+=8)
-		{
-		ROUND_16_80(i+0,a,b,c,d,e,f,g,h,X);
-		ROUND_16_80(i+1,h,a,b,c,d,e,f,g,X);
-		ROUND_16_80(i+2,g,h,a,b,c,d,e,f,X);
-		ROUND_16_80(i+3,f,g,h,a,b,c,d,e,X);
-		ROUND_16_80(i+4,e,f,g,h,a,b,c,d,X);
-		ROUND_16_80(i+5,d,e,f,g,h,a,b,c,X);
-		ROUND_16_80(i+6,c,d,e,f,g,h,a,b,X);
-		ROUND_16_80(i+7,b,c,d,e,f,g,h,a,X);
-		}
-
-	ctx->h[0] += a;	ctx->h[1] += b;	ctx->h[2] += c;	ctx->h[3] += d;
-	ctx->h[4] += e;	ctx->h[5] += f;	ctx->h[6] += g;	ctx->h[7] += h;
-
-			W+=SHA_LBLOCK;
-			}
-	}
-
-#endif
-
-#endif /* SHA512_ASM */
-
-#endif /* OPENSSL_NO_SHA512 */
diff --git a/crypto/openssl/crypto/sha/sha512t.c b/crypto/openssl/crypto/sha/sha512t.c
deleted file mode 100644
index 210041d435c6..000000000000
--- a/crypto/openssl/crypto/sha/sha512t.c
+++ /dev/null
@@ -1,184 +0,0 @@
-/* crypto/sha/sha512t.c */
-/* ====================================================================
- * Copyright (c) 2004 The OpenSSL Project.  All rights reserved.
- * ====================================================================
- */
-#include <stdio.h>
-#include <string.h>
-#include <stdlib.h>
-
-#include <openssl/sha.h>
-#include <openssl/evp.h>
-#include <openssl/crypto.h>
-
-#if defined(OPENSSL_NO_SHA) || defined(OPENSSL_NO_SHA512)
-int main(int argc, char *argv[])
-{
-    printf("No SHA512 support\n");
-    return(0);
-}
-#else
-
-unsigned char app_c1[SHA512_DIGEST_LENGTH] = {
-	0xdd,0xaf,0x35,0xa1,0x93,0x61,0x7a,0xba,
-	0xcc,0x41,0x73,0x49,0xae,0x20,0x41,0x31,
-	0x12,0xe6,0xfa,0x4e,0x89,0xa9,0x7e,0xa2,
-	0x0a,0x9e,0xee,0xe6,0x4b,0x55,0xd3,0x9a,
-	0x21,0x92,0x99,0x2a,0x27,0x4f,0xc1,0xa8,
-	0x36,0xba,0x3c,0x23,0xa3,0xfe,0xeb,0xbd,
-	0x45,0x4d,0x44,0x23,0x64,0x3c,0xe8,0x0e,
-	0x2a,0x9a,0xc9,0x4f,0xa5,0x4c,0xa4,0x9f };
-
-unsigned char app_c2[SHA512_DIGEST_LENGTH] = {
-	0x8e,0x95,0x9b,0x75,0xda,0xe3,0x13,0xda,
-	0x8c,0xf4,0xf7,0x28,0x14,0xfc,0x14,0x3f,
-	0x8f,0x77,0x79,0xc6,0xeb,0x9f,0x7f,0xa1,
-	0x72,0x99,0xae,0xad,0xb6,0x88,0x90,0x18,
-	0x50,0x1d,0x28,0x9e,0x49,0x00,0xf7,0xe4,
-	0x33,0x1b,0x99,0xde,0xc4,0xb5,0x43,0x3a,
-	0xc7,0xd3,0x29,0xee,0xb6,0xdd,0x26,0x54,
-	0x5e,0x96,0xe5,0x5b,0x87,0x4b,0xe9,0x09 };
-
-unsigned char app_c3[SHA512_DIGEST_LENGTH] = {
-	0xe7,0x18,0x48,0x3d,0x0c,0xe7,0x69,0x64,
-	0x4e,0x2e,0x42,0xc7,0xbc,0x15,0xb4,0x63,
-	0x8e,0x1f,0x98,0xb1,0x3b,0x20,0x44,0x28,
-	0x56,0x32,0xa8,0x03,0xaf,0xa9,0x73,0xeb,
-	0xde,0x0f,0xf2,0x44,0x87,0x7e,0xa6,0x0a,
-	0x4c,0xb0,0x43,0x2c,0xe5,0x77,0xc3,0x1b,
-	0xeb,0x00,0x9c,0x5c,0x2c,0x49,0xaa,0x2e,
-	0x4e,0xad,0xb2,0x17,0xad,0x8c,0xc0,0x9b };
-
-unsigned char app_d1[SHA384_DIGEST_LENGTH] = {
-	0xcb,0x00,0x75,0x3f,0x45,0xa3,0x5e,0x8b,
-	0xb5,0xa0,0x3d,0x69,0x9a,0xc6,0x50,0x07,
-	0x27,0x2c,0x32,0xab,0x0e,0xde,0xd1,0x63,
-	0x1a,0x8b,0x60,0x5a,0x43,0xff,0x5b,0xed,
-	0x80,0x86,0x07,0x2b,0xa1,0xe7,0xcc,0x23,
-	0x58,0xba,0xec,0xa1,0x34,0xc8,0x25,0xa7 };
-
-unsigned char app_d2[SHA384_DIGEST_LENGTH] = {
-	0x09,0x33,0x0c,0x33,0xf7,0x11,0x47,0xe8,
-	0x3d,0x19,0x2f,0xc7,0x82,0xcd,0x1b,0x47,
-	0x53,0x11,0x1b,0x17,0x3b,0x3b,0x05,0xd2,
-	0x2f,0xa0,0x80,0x86,0xe3,0xb0,0xf7,0x12,
-	0xfc,0xc7,0xc7,0x1a,0x55,0x7e,0x2d,0xb9,
-	0x66,0xc3,0xe9,0xfa,0x91,0x74,0x60,0x39 };
-
-unsigned char app_d3[SHA384_DIGEST_LENGTH] = {
-	0x9d,0x0e,0x18,0x09,0x71,0x64,0x74,0xcb,
-	0x08,0x6e,0x83,0x4e,0x31,0x0a,0x4a,0x1c,
-	0xed,0x14,0x9e,0x9c,0x00,0xf2,0x48,0x52,
-	0x79,0x72,0xce,0xc5,0x70,0x4c,0x2a,0x5b,
-	0x07,0xb8,0xb3,0xdc,0x38,0xec,0xc4,0xeb,
-	0xae,0x97,0xdd,0xd8,0x7f,0x3d,0x89,0x85 };
-
-int main (int argc,char **argv)
-{ unsigned char md[SHA512_DIGEST_LENGTH];
-  int		i;
-  EVP_MD_CTX	evp;
-
-#ifdef OPENSSL_IA32_SSE2
-    /* Alternative to this is to call OpenSSL_add_all_algorithms...
-     * The below code is retained exclusively for debugging purposes. */
-    { char      *env;
-
-	if ((env=getenv("OPENSSL_ia32cap")))
-	    OPENSSL_ia32cap = strtoul (env,NULL,0);
-    }
-#endif
-
-    fprintf(stdout,"Testing SHA-512 ");
-
-    EVP_Digest ("abc",3,md,NULL,EVP_sha512(),NULL);
-    if (memcmp(md,app_c1,sizeof(app_c1)))
-    {	fflush(stdout);
-	fprintf(stderr,"\nTEST 1 of 3 failed.\n");
-	return 1;
-    }
-    else
-	fprintf(stdout,"."); fflush(stdout);
-
-    EVP_Digest ("abcdefgh""bcdefghi""cdefghij""defghijk"
-		"efghijkl""fghijklm""ghijklmn""hijklmno"
-		"ijklmnop""jklmnopq""klmnopqr""lmnopqrs"
-		"mnopqrst""nopqrstu",112,md,NULL,EVP_sha512(),NULL);
-    if (memcmp(md,app_c2,sizeof(app_c2)))
-    {	fflush(stdout);
-	fprintf(stderr,"\nTEST 2 of 3 failed.\n");
-	return 1;
-    }
-    else
-	fprintf(stdout,"."); fflush(stdout);
-
-    EVP_MD_CTX_init (&evp);
-    EVP_DigestInit_ex (&evp,EVP_sha512(),NULL);
-    for (i=0;i<1000000;i+=288)
-	EVP_DigestUpdate (&evp,	"aaaaaaaa""aaaaaaaa""aaaaaaaa""aaaaaaaa"
-				"aaaaaaaa""aaaaaaaa""aaaaaaaa""aaaaaaaa"
-				"aaaaaaaa""aaaaaaaa""aaaaaaaa""aaaaaaaa"
-				"aaaaaaaa""aaaaaaaa""aaaaaaaa""aaaaaaaa"
-				"aaaaaaaa""aaaaaaaa""aaaaaaaa""aaaaaaaa"
-				"aaaaaaaa""aaaaaaaa""aaaaaaaa""aaaaaaaa"
-				"aaaaaaaa""aaaaaaaa""aaaaaaaa""aaaaaaaa"
-				"aaaaaaaa""aaaaaaaa""aaaaaaaa""aaaaaaaa"
-				"aaaaaaaa""aaaaaaaa""aaaaaaaa""aaaaaaaa",
-				(1000000-i)<288?1000000-i:288);
-    EVP_DigestFinal_ex (&evp,md,NULL);
-    EVP_MD_CTX_cleanup (&evp);
-
-    if (memcmp(md,app_c3,sizeof(app_c3)))
-    {	fflush(stdout);
-	fprintf(stderr,"\nTEST 3 of 3 failed.\n");
-	return 1;
-    }
-    else
-	fprintf(stdout,"."); fflush(stdout);
-
-    fprintf(stdout," passed.\n"); fflush(stdout);
-
-    fprintf(stdout,"Testing SHA-384 ");
-
-    EVP_Digest ("abc",3,md,NULL,EVP_sha384(),NULL);
-    if (memcmp(md,app_d1,sizeof(app_d1)))
-    {	fflush(stdout);
-	fprintf(stderr,"\nTEST 1 of 3 failed.\n");
-	return 1;
-    }
-    else
-	fprintf(stdout,"."); fflush(stdout);
-
-    EVP_Digest ("abcdefgh""bcdefghi""cdefghij""defghijk"
-		"efghijkl""fghijklm""ghijklmn""hijklmno"
-		"ijklmnop""jklmnopq""klmnopqr""lmnopqrs"
-		"mnopqrst""nopqrstu",112,md,NULL,EVP_sha384(),NULL);
-    if (memcmp(md,app_d2,sizeof(app_d2)))
-    {	fflush(stdout);
-	fprintf(stderr,"\nTEST 2 of 3 failed.\n");
-	return 1;
-    }
-    else
-	fprintf(stdout,"."); fflush(stdout);
-
-    EVP_MD_CTX_init (&evp);
-    EVP_DigestInit_ex (&evp,EVP_sha384(),NULL);
-    for (i=0;i<1000000;i+=64)
-	EVP_DigestUpdate (&evp,	"aaaaaaaa""aaaaaaaa""aaaaaaaa""aaaaaaaa"
-				"aaaaaaaa""aaaaaaaa""aaaaaaaa""aaaaaaaa",
-				(1000000-i)<64?1000000-i:64);
-    EVP_DigestFinal_ex (&evp,md,NULL);
-    EVP_MD_CTX_cleanup (&evp);
-
-    if (memcmp(md,app_d3,sizeof(app_d3)))
-    {	fflush(stdout);
-	fprintf(stderr,"\nTEST 3 of 3 failed.\n");
-	return 1;
-    }
-    else
-	fprintf(stdout,"."); fflush(stdout);
-
-    fprintf(stdout," passed.\n"); fflush(stdout);
-
-  return 0;
-}
-#endif
diff --git a/crypto/openssl/crypto/sha/sha_dgst.c b/crypto/openssl/crypto/sha/sha_dgst.c
deleted file mode 100644
index 70eb56032c38..000000000000
--- a/crypto/openssl/crypto/sha/sha_dgst.c
+++ /dev/null
@@ -1,74 +0,0 @@
-/* crypto/sha/sha1dgst.c */
-/* Copyright (C) 1995-1998 Eric Young (eay@cryptsoft.com)
- * All rights reserved.
- *
- * This package is an SSL implementation written
- * by Eric Young (eay@cryptsoft.com).
- * The implementation was written so as to conform with Netscapes SSL.
- * 
- * This library is free for commercial and non-commercial use as long as
- * the following conditions are aheared to.  The following conditions
- * apply to all code found in this distribution, be it the RC4, RSA,
- * lhash, DES, etc., code; not just the SSL code.  The SSL documentation
- * included with this distribution is covered by the same copyright terms
- * except that the holder is Tim Hudson (tjh@cryptsoft.com).
- * 
- * Copyright remains Eric Young's, and as such any Copyright notices in
- * the code are not to be removed.
- * If this package is used in a product, Eric Young should be given attribution
- * as the author of the parts of the library used.
- * This can be in the form of a textual message at program startup or
- * in documentation (online or textual) provided with the package.
- * 
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions
- * are met:
- * 1. Redistributions of source code must retain the copyright
- *    notice, this list of conditions and the following disclaimer.
- * 2. Redistributions in binary form must reproduce the above copyright
- *    notice, this list of conditions and the following disclaimer in the
- *    documentation and/or other materials provided with the distribution.
- * 3. All advertising materials mentioning features or use of this software
- *    must display the following acknowledgement:
- *    "This product includes cryptographic software written by
- *     Eric Young (eay@cryptsoft.com)"
- *    The word 'cryptographic' can be left out if the rouines from the library
- *    being used are not cryptographic related :-).
- * 4. If you include any Windows specific code (or a derivative thereof) from 
- *    the apps directory (application code) you must include an acknowledgement:
- *    "This product includes software written by Tim Hudson (tjh@cryptsoft.com)"
- * 
- * THIS SOFTWARE IS PROVIDED BY ERIC YOUNG ``AS IS'' AND
- * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
- * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
- * ARE DISCLAIMED.  IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE
- * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
- * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
- * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
- * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
- * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
- * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
- * SUCH DAMAGE.
- * 
- * The licence and distribution terms for any publically available version or
- * derivative of this code cannot be changed.  i.e. this code cannot simply be
- * copied and put under another distribution licence
- * [including the GNU Public Licence.]
- */
-
-#include <openssl/opensslconf.h>
-#if !defined(OPENSSL_NO_SHA0) && !defined(OPENSSL_NO_SHA)
-
-#undef  SHA_1
-#define SHA_0
-
-#include <openssl/opensslv.h>
-
-const char SHA_version[]="SHA" OPENSSL_VERSION_PTEXT;
-
-/* The implementation is in ../md32_common.h */
-
-#include "sha_locl.h"
-
-#endif
-
diff --git a/crypto/openssl/crypto/sha/sha_locl.h b/crypto/openssl/crypto/sha/sha_locl.h
deleted file mode 100644
index 6281313a4556..000000000000
--- a/crypto/openssl/crypto/sha/sha_locl.h
+++ /dev/null
@@ -1,605 +0,0 @@
-/* crypto/sha/sha_locl.h */
-/* Copyright (C) 1995-1998 Eric Young (eay@cryptsoft.com)
- * All rights reserved.
- *
- * This package is an SSL implementation written
- * by Eric Young (eay@cryptsoft.com).
- * The implementation was written so as to conform with Netscapes SSL.
- * 
- * This library is free for commercial and non-commercial use as long as
- * the following conditions are aheared to.  The following conditions
- * apply to all code found in this distribution, be it the RC4, RSA,
- * lhash, DES, etc., code; not just the SSL code.  The SSL documentation
- * included with this distribution is covered by the same copyright terms
- * except that the holder is Tim Hudson (tjh@cryptsoft.com).
- * 
- * Copyright remains Eric Young's, and as such any Copyright notices in
- * the code are not to be removed.
- * If this package is used in a product, Eric Young should be given attribution
- * as the author of the parts of the library used.
- * This can be in the form of a textual message at program startup or
- * in documentation (online or textual) provided with the package.
- * 
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions
- * are met:
- * 1. Redistributions of source code must retain the copyright
- *    notice, this list of conditions and the following disclaimer.
- * 2. Redistributions in binary form must reproduce the above copyright
- *    notice, this list of conditions and the following disclaimer in the
- *    documentation and/or other materials provided with the distribution.
- * 3. All advertising materials mentioning features or use of this software
- *    must display the following acknowledgement:
- *    "This product includes cryptographic software written by
- *     Eric Young (eay@cryptsoft.com)"
- *    The word 'cryptographic' can be left out if the rouines from the library
- *    being used are not cryptographic related :-).
- * 4. If you include any Windows specific code (or a derivative thereof) from 
- *    the apps directory (application code) you must include an acknowledgement:
- *    "This product includes software written by Tim Hudson (tjh@cryptsoft.com)"
- * 
- * THIS SOFTWARE IS PROVIDED BY ERIC YOUNG ``AS IS'' AND
- * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
- * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
- * ARE DISCLAIMED.  IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE
- * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
- * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
- * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
- * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
- * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
- * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
- * SUCH DAMAGE.
- * 
- * The licence and distribution terms for any publically available version or
- * derivative of this code cannot be changed.  i.e. this code cannot simply be
- * copied and put under another distribution licence
- * [including the GNU Public Licence.]
- */
-
-#include <stdlib.h>
-#include <string.h>
-
-#include <openssl/opensslconf.h>
-#include <openssl/sha.h>
-
-#ifndef SHA_LONG_LOG2
-#define SHA_LONG_LOG2	2	/* default to 32 bits */
-#endif
-
-#define DATA_ORDER_IS_BIG_ENDIAN
-
-#define HASH_LONG               SHA_LONG
-#define HASH_LONG_LOG2          SHA_LONG_LOG2
-#define HASH_CTX                SHA_CTX
-#define HASH_CBLOCK             SHA_CBLOCK
-#define HASH_LBLOCK             SHA_LBLOCK
-#define HASH_MAKE_STRING(c,s)   do {	\
-	unsigned long ll;		\
-	ll=(c)->h0; HOST_l2c(ll,(s));	\
-	ll=(c)->h1; HOST_l2c(ll,(s));	\
-	ll=(c)->h2; HOST_l2c(ll,(s));	\
-	ll=(c)->h3; HOST_l2c(ll,(s));	\
-	ll=(c)->h4; HOST_l2c(ll,(s));	\
-	} while (0)
-
-#if defined(SHA_0)
-
-# define HASH_UPDATE             	SHA_Update
-# define HASH_TRANSFORM          	SHA_Transform
-# define HASH_FINAL              	SHA_Final
-# define HASH_INIT			SHA_Init
-# define HASH_BLOCK_HOST_ORDER   	sha_block_host_order
-# define HASH_BLOCK_DATA_ORDER   	sha_block_data_order
-# define Xupdate(a,ix,ia,ib,ic,id)	(ix=(a)=(ia^ib^ic^id))
-
-  void sha_block_host_order (SHA_CTX *c, const void *p,size_t num);
-  void sha_block_data_order (SHA_CTX *c, const void *p,size_t num);
-
-#elif defined(SHA_1)
-
-# define HASH_UPDATE             	SHA1_Update
-# define HASH_TRANSFORM          	SHA1_Transform
-# define HASH_FINAL              	SHA1_Final
-# define HASH_INIT			SHA1_Init
-# define HASH_BLOCK_HOST_ORDER   	sha1_block_host_order
-# define HASH_BLOCK_DATA_ORDER   	sha1_block_data_order
-# if defined(__MWERKS__) && defined(__MC68K__)
-   /* Metrowerks for Motorola fails otherwise:-( <appro@fy.chalmers.se> */
-#  define Xupdate(a,ix,ia,ib,ic,id)	do { (a)=(ia^ib^ic^id);		\
-					     ix=(a)=ROTATE((a),1);	\
-					} while (0)
-# else
-#  define Xupdate(a,ix,ia,ib,ic,id)	( (a)=(ia^ib^ic^id),	\
-					  ix=(a)=ROTATE((a),1)	\
-					)
-# endif
-
-# ifdef SHA1_ASM
-#  if defined(__i386) || defined(__i386__) || defined(_M_IX86) || defined(__INTEL__)
-#   if !defined(B_ENDIAN)
-#    define sha1_block_host_order		sha1_block_asm_host_order
-#    define DONT_IMPLEMENT_BLOCK_HOST_ORDER
-#    define sha1_block_data_order		sha1_block_asm_data_order
-#    define DONT_IMPLEMENT_BLOCK_DATA_ORDER
-#    define HASH_BLOCK_DATA_ORDER_ALIGNED	sha1_block_asm_data_order
-#   endif
-#  elif defined(__ia64) || defined(__ia64__) || defined(_M_IA64)
-#   define sha1_block_host_order		sha1_block_asm_host_order
-#   define DONT_IMPLEMENT_BLOCK_HOST_ORDER
-#   define sha1_block_data_order		sha1_block_asm_data_order
-#   define DONT_IMPLEMENT_BLOCK_DATA_ORDER
-#  endif
-# endif
-  void sha1_block_host_order (SHA_CTX *c, const void *p,size_t num);
-  void sha1_block_data_order (SHA_CTX *c, const void *p,size_t num);
-
-#else
-# error "Either SHA_0 or SHA_1 must be defined."
-#endif
-
-#include "md32_common.h"
-
-#define INIT_DATA_h0 0x67452301UL
-#define INIT_DATA_h1 0xefcdab89UL
-#define INIT_DATA_h2 0x98badcfeUL
-#define INIT_DATA_h3 0x10325476UL
-#define INIT_DATA_h4 0xc3d2e1f0UL
-
-int HASH_INIT (SHA_CTX *c)
-	{
-	c->h0=INIT_DATA_h0;
-	c->h1=INIT_DATA_h1;
-	c->h2=INIT_DATA_h2;
-	c->h3=INIT_DATA_h3;
-	c->h4=INIT_DATA_h4;
-	c->Nl=0;
-	c->Nh=0;
-	c->num=0;
-	return 1;
-	}
-
-#define K_00_19	0x5a827999UL
-#define K_20_39 0x6ed9eba1UL
-#define K_40_59 0x8f1bbcdcUL
-#define K_60_79 0xca62c1d6UL
-
-/* As  pointed out by Wei Dai <weidai@eskimo.com>, F() below can be
- * simplified to the code in F_00_19.  Wei attributes these optimisations
- * to Peter Gutmann's SHS code, and he attributes it to Rich Schroeppel.
- * #define F(x,y,z) (((x) & (y))  |  ((~(x)) & (z)))
- * I've just become aware of another tweak to be made, again from Wei Dai,
- * in F_40_59, (x&a)|(y&a) -> (x|y)&a
- */
-#define	F_00_19(b,c,d)	((((c) ^ (d)) & (b)) ^ (d)) 
-#define	F_20_39(b,c,d)	((b) ^ (c) ^ (d))
-#define F_40_59(b,c,d)	(((b) & (c)) | (((b)|(c)) & (d))) 
-#define	F_60_79(b,c,d)	F_20_39(b,c,d)
-
-#ifndef OPENSSL_SMALL_FOOTPRINT
-
-#define BODY_00_15(i,a,b,c,d,e,f,xi) \
-	(f)=xi+(e)+K_00_19+ROTATE((a),5)+F_00_19((b),(c),(d)); \
-	(b)=ROTATE((b),30);
-
-#define BODY_16_19(i,a,b,c,d,e,f,xi,xa,xb,xc,xd) \
-	Xupdate(f,xi,xa,xb,xc,xd); \
-	(f)+=(e)+K_00_19+ROTATE((a),5)+F_00_19((b),(c),(d)); \
-	(b)=ROTATE((b),30);
-
-#define BODY_20_31(i,a,b,c,d,e,f,xi,xa,xb,xc,xd) \
-	Xupdate(f,xi,xa,xb,xc,xd); \
-	(f)+=(e)+K_20_39+ROTATE((a),5)+F_20_39((b),(c),(d)); \
-	(b)=ROTATE((b),30);
-
-#define BODY_32_39(i,a,b,c,d,e,f,xa,xb,xc,xd) \
-	Xupdate(f,xa,xa,xb,xc,xd); \
-	(f)+=(e)+K_20_39+ROTATE((a),5)+F_20_39((b),(c),(d)); \
-	(b)=ROTATE((b),30);
-
-#define BODY_40_59(i,a,b,c,d,e,f,xa,xb,xc,xd) \
-	Xupdate(f,xa,xa,xb,xc,xd); \
-	(f)+=(e)+K_40_59+ROTATE((a),5)+F_40_59((b),(c),(d)); \
-	(b)=ROTATE((b),30);
-
-#define BODY_60_79(i,a,b,c,d,e,f,xa,xb,xc,xd) \
-	Xupdate(f,xa,xa,xb,xc,xd); \
-	(f)=xa+(e)+K_60_79+ROTATE((a),5)+F_60_79((b),(c),(d)); \
-	(b)=ROTATE((b),30);
-
-#ifdef X
-#undef X
-#endif
-#ifndef MD32_XARRAY
-  /*
-   * Originally X was an array. As it's automatic it's natural
-   * to expect RISC compiler to accomodate at least part of it in
-   * the register bank, isn't it? Unfortunately not all compilers
-   * "find" this expectation reasonable:-( On order to make such
-   * compilers generate better code I replace X[] with a bunch of
-   * X0, X1, etc. See the function body below...
-   *					<appro@fy.chalmers.se>
-   */
-# define X(i)	XX##i
-#else
-  /*
-   * However! Some compilers (most notably HP C) get overwhelmed by
-   * that many local variables so that we have to have the way to
-   * fall down to the original behavior.
-   */
-# define X(i)	XX[i]
-#endif
-
-#ifndef DONT_IMPLEMENT_BLOCK_HOST_ORDER
-void HASH_BLOCK_HOST_ORDER (SHA_CTX *c, const void *d, size_t num)
-	{
-	const SHA_LONG *W=d;
-	register unsigned MD32_REG_T A,B,C,D,E,T;
-#ifndef MD32_XARRAY
-	unsigned MD32_REG_T	XX0, XX1, XX2, XX3, XX4, XX5, XX6, XX7,
-				XX8, XX9,XX10,XX11,XX12,XX13,XX14,XX15;
-#else
-	SHA_LONG	XX[16];
-#endif
-
-	A=c->h0;
-	B=c->h1;
-	C=c->h2;
-	D=c->h3;
-	E=c->h4;
-
-	for (;;)
-		{
-	BODY_00_15( 0,A,B,C,D,E,T,W[ 0]);
-	BODY_00_15( 1,T,A,B,C,D,E,W[ 1]);
-	BODY_00_15( 2,E,T,A,B,C,D,W[ 2]);
-	BODY_00_15( 3,D,E,T,A,B,C,W[ 3]);
-	BODY_00_15( 4,C,D,E,T,A,B,W[ 4]);
-	BODY_00_15( 5,B,C,D,E,T,A,W[ 5]);
-	BODY_00_15( 6,A,B,C,D,E,T,W[ 6]);
-	BODY_00_15( 7,T,A,B,C,D,E,W[ 7]);
-	BODY_00_15( 8,E,T,A,B,C,D,W[ 8]);
-	BODY_00_15( 9,D,E,T,A,B,C,W[ 9]);
-	BODY_00_15(10,C,D,E,T,A,B,W[10]);
-	BODY_00_15(11,B,C,D,E,T,A,W[11]);
-	BODY_00_15(12,A,B,C,D,E,T,W[12]);
-	BODY_00_15(13,T,A,B,C,D,E,W[13]);
-	BODY_00_15(14,E,T,A,B,C,D,W[14]);
-	BODY_00_15(15,D,E,T,A,B,C,W[15]);
-
-	BODY_16_19(16,C,D,E,T,A,B,X( 0),W[ 0],W[ 2],W[ 8],W[13]);
-	BODY_16_19(17,B,C,D,E,T,A,X( 1),W[ 1],W[ 3],W[ 9],W[14]);
-	BODY_16_19(18,A,B,C,D,E,T,X( 2),W[ 2],W[ 4],W[10],W[15]);
-	BODY_16_19(19,T,A,B,C,D,E,X( 3),W[ 3],W[ 5],W[11],X( 0));
-
-	BODY_20_31(20,E,T,A,B,C,D,X( 4),W[ 4],W[ 6],W[12],X( 1));
-	BODY_20_31(21,D,E,T,A,B,C,X( 5),W[ 5],W[ 7],W[13],X( 2));
-	BODY_20_31(22,C,D,E,T,A,B,X( 6),W[ 6],W[ 8],W[14],X( 3));
-	BODY_20_31(23,B,C,D,E,T,A,X( 7),W[ 7],W[ 9],W[15],X( 4));
-	BODY_20_31(24,A,B,C,D,E,T,X( 8),W[ 8],W[10],X( 0),X( 5));
-	BODY_20_31(25,T,A,B,C,D,E,X( 9),W[ 9],W[11],X( 1),X( 6));
-	BODY_20_31(26,E,T,A,B,C,D,X(10),W[10],W[12],X( 2),X( 7));
-	BODY_20_31(27,D,E,T,A,B,C,X(11),W[11],W[13],X( 3),X( 8));
-	BODY_20_31(28,C,D,E,T,A,B,X(12),W[12],W[14],X( 4),X( 9));
-	BODY_20_31(29,B,C,D,E,T,A,X(13),W[13],W[15],X( 5),X(10));
-	BODY_20_31(30,A,B,C,D,E,T,X(14),W[14],X( 0),X( 6),X(11));
-	BODY_20_31(31,T,A,B,C,D,E,X(15),W[15],X( 1),X( 7),X(12));
-
-	BODY_32_39(32,E,T,A,B,C,D,X( 0),X( 2),X( 8),X(13));
-	BODY_32_39(33,D,E,T,A,B,C,X( 1),X( 3),X( 9),X(14));
-	BODY_32_39(34,C,D,E,T,A,B,X( 2),X( 4),X(10),X(15));
-	BODY_32_39(35,B,C,D,E,T,A,X( 3),X( 5),X(11),X( 0));
-	BODY_32_39(36,A,B,C,D,E,T,X( 4),X( 6),X(12),X( 1));
-	BODY_32_39(37,T,A,B,C,D,E,X( 5),X( 7),X(13),X( 2));
-	BODY_32_39(38,E,T,A,B,C,D,X( 6),X( 8),X(14),X( 3));
-	BODY_32_39(39,D,E,T,A,B,C,X( 7),X( 9),X(15),X( 4));
-
-	BODY_40_59(40,C,D,E,T,A,B,X( 8),X(10),X( 0),X( 5));
-	BODY_40_59(41,B,C,D,E,T,A,X( 9),X(11),X( 1),X( 6));
-	BODY_40_59(42,A,B,C,D,E,T,X(10),X(12),X( 2),X( 7));
-	BODY_40_59(43,T,A,B,C,D,E,X(11),X(13),X( 3),X( 8));
-	BODY_40_59(44,E,T,A,B,C,D,X(12),X(14),X( 4),X( 9));
-	BODY_40_59(45,D,E,T,A,B,C,X(13),X(15),X( 5),X(10));
-	BODY_40_59(46,C,D,E,T,A,B,X(14),X( 0),X( 6),X(11));
-	BODY_40_59(47,B,C,D,E,T,A,X(15),X( 1),X( 7),X(12));
-	BODY_40_59(48,A,B,C,D,E,T,X( 0),X( 2),X( 8),X(13));
-	BODY_40_59(49,T,A,B,C,D,E,X( 1),X( 3),X( 9),X(14));
-	BODY_40_59(50,E,T,A,B,C,D,X( 2),X( 4),X(10),X(15));
-	BODY_40_59(51,D,E,T,A,B,C,X( 3),X( 5),X(11),X( 0));
-	BODY_40_59(52,C,D,E,T,A,B,X( 4),X( 6),X(12),X( 1));
-	BODY_40_59(53,B,C,D,E,T,A,X( 5),X( 7),X(13),X( 2));
-	BODY_40_59(54,A,B,C,D,E,T,X( 6),X( 8),X(14),X( 3));
-	BODY_40_59(55,T,A,B,C,D,E,X( 7),X( 9),X(15),X( 4));
-	BODY_40_59(56,E,T,A,B,C,D,X( 8),X(10),X( 0),X( 5));
-	BODY_40_59(57,D,E,T,A,B,C,X( 9),X(11),X( 1),X( 6));
-	BODY_40_59(58,C,D,E,T,A,B,X(10),X(12),X( 2),X( 7));
-	BODY_40_59(59,B,C,D,E,T,A,X(11),X(13),X( 3),X( 8));
-
-	BODY_60_79(60,A,B,C,D,E,T,X(12),X(14),X( 4),X( 9));
-	BODY_60_79(61,T,A,B,C,D,E,X(13),X(15),X( 5),X(10));
-	BODY_60_79(62,E,T,A,B,C,D,X(14),X( 0),X( 6),X(11));
-	BODY_60_79(63,D,E,T,A,B,C,X(15),X( 1),X( 7),X(12));
-	BODY_60_79(64,C,D,E,T,A,B,X( 0),X( 2),X( 8),X(13));
-	BODY_60_79(65,B,C,D,E,T,A,X( 1),X( 3),X( 9),X(14));
-	BODY_60_79(66,A,B,C,D,E,T,X( 2),X( 4),X(10),X(15));
-	BODY_60_79(67,T,A,B,C,D,E,X( 3),X( 5),X(11),X( 0));
-	BODY_60_79(68,E,T,A,B,C,D,X( 4),X( 6),X(12),X( 1));
-	BODY_60_79(69,D,E,T,A,B,C,X( 5),X( 7),X(13),X( 2));
-	BODY_60_79(70,C,D,E,T,A,B,X( 6),X( 8),X(14),X( 3));
-	BODY_60_79(71,B,C,D,E,T,A,X( 7),X( 9),X(15),X( 4));
-	BODY_60_79(72,A,B,C,D,E,T,X( 8),X(10),X( 0),X( 5));
-	BODY_60_79(73,T,A,B,C,D,E,X( 9),X(11),X( 1),X( 6));
-	BODY_60_79(74,E,T,A,B,C,D,X(10),X(12),X( 2),X( 7));
-	BODY_60_79(75,D,E,T,A,B,C,X(11),X(13),X( 3),X( 8));
-	BODY_60_79(76,C,D,E,T,A,B,X(12),X(14),X( 4),X( 9));
-	BODY_60_79(77,B,C,D,E,T,A,X(13),X(15),X( 5),X(10));
-	BODY_60_79(78,A,B,C,D,E,T,X(14),X( 0),X( 6),X(11));
-	BODY_60_79(79,T,A,B,C,D,E,X(15),X( 1),X( 7),X(12));
-	
-	c->h0=(c->h0+E)&0xffffffffL; 
-	c->h1=(c->h1+T)&0xffffffffL;
-	c->h2=(c->h2+A)&0xffffffffL;
-	c->h3=(c->h3+B)&0xffffffffL;
-	c->h4=(c->h4+C)&0xffffffffL;
-
-	if (--num == 0) break;
-
-	A=c->h0;
-	B=c->h1;
-	C=c->h2;
-	D=c->h3;
-	E=c->h4;
-
-	W+=SHA_LBLOCK;
-		}
-	}
-#endif
-
-#ifndef DONT_IMPLEMENT_BLOCK_DATA_ORDER
-void HASH_BLOCK_DATA_ORDER (SHA_CTX *c, const void *p, size_t num)
-	{
-	const unsigned char *data=p;
-	register unsigned MD32_REG_T A,B,C,D,E,T,l;
-#ifndef MD32_XARRAY
-	unsigned MD32_REG_T	XX0, XX1, XX2, XX3, XX4, XX5, XX6, XX7,
-				XX8, XX9,XX10,XX11,XX12,XX13,XX14,XX15;
-#else
-	SHA_LONG	XX[16];
-#endif
-
-	A=c->h0;
-	B=c->h1;
-	C=c->h2;
-	D=c->h3;
-	E=c->h4;
-
-	for (;;)
-		{
-
-	HOST_c2l(data,l); X( 0)=l;		HOST_c2l(data,l); X( 1)=l;
-	BODY_00_15( 0,A,B,C,D,E,T,X( 0));	HOST_c2l(data,l); X( 2)=l;
-	BODY_00_15( 1,T,A,B,C,D,E,X( 1));	HOST_c2l(data,l); X( 3)=l;
-	BODY_00_15( 2,E,T,A,B,C,D,X( 2));	HOST_c2l(data,l); X( 4)=l;
-	BODY_00_15( 3,D,E,T,A,B,C,X( 3));	HOST_c2l(data,l); X( 5)=l;
-	BODY_00_15( 4,C,D,E,T,A,B,X( 4));	HOST_c2l(data,l); X( 6)=l;
-	BODY_00_15( 5,B,C,D,E,T,A,X( 5));	HOST_c2l(data,l); X( 7)=l;
-	BODY_00_15( 6,A,B,C,D,E,T,X( 6));	HOST_c2l(data,l); X( 8)=l;
-	BODY_00_15( 7,T,A,B,C,D,E,X( 7));	HOST_c2l(data,l); X( 9)=l;
-	BODY_00_15( 8,E,T,A,B,C,D,X( 8));	HOST_c2l(data,l); X(10)=l;
-	BODY_00_15( 9,D,E,T,A,B,C,X( 9));	HOST_c2l(data,l); X(11)=l;
-	BODY_00_15(10,C,D,E,T,A,B,X(10));	HOST_c2l(data,l); X(12)=l;
-	BODY_00_15(11,B,C,D,E,T,A,X(11));	HOST_c2l(data,l); X(13)=l;
-	BODY_00_15(12,A,B,C,D,E,T,X(12));	HOST_c2l(data,l); X(14)=l;
-	BODY_00_15(13,T,A,B,C,D,E,X(13));	HOST_c2l(data,l); X(15)=l;
-	BODY_00_15(14,E,T,A,B,C,D,X(14));
-	BODY_00_15(15,D,E,T,A,B,C,X(15));
-
-	BODY_16_19(16,C,D,E,T,A,B,X( 0),X( 0),X( 2),X( 8),X(13));
-	BODY_16_19(17,B,C,D,E,T,A,X( 1),X( 1),X( 3),X( 9),X(14));
-	BODY_16_19(18,A,B,C,D,E,T,X( 2),X( 2),X( 4),X(10),X(15));
-	BODY_16_19(19,T,A,B,C,D,E,X( 3),X( 3),X( 5),X(11),X( 0));
-
-	BODY_20_31(20,E,T,A,B,C,D,X( 4),X( 4),X( 6),X(12),X( 1));
-	BODY_20_31(21,D,E,T,A,B,C,X( 5),X( 5),X( 7),X(13),X( 2));
-	BODY_20_31(22,C,D,E,T,A,B,X( 6),X( 6),X( 8),X(14),X( 3));
-	BODY_20_31(23,B,C,D,E,T,A,X( 7),X( 7),X( 9),X(15),X( 4));
-	BODY_20_31(24,A,B,C,D,E,T,X( 8),X( 8),X(10),X( 0),X( 5));
-	BODY_20_31(25,T,A,B,C,D,E,X( 9),X( 9),X(11),X( 1),X( 6));
-	BODY_20_31(26,E,T,A,B,C,D,X(10),X(10),X(12),X( 2),X( 7));
-	BODY_20_31(27,D,E,T,A,B,C,X(11),X(11),X(13),X( 3),X( 8));
-	BODY_20_31(28,C,D,E,T,A,B,X(12),X(12),X(14),X( 4),X( 9));
-	BODY_20_31(29,B,C,D,E,T,A,X(13),X(13),X(15),X( 5),X(10));
-	BODY_20_31(30,A,B,C,D,E,T,X(14),X(14),X( 0),X( 6),X(11));
-	BODY_20_31(31,T,A,B,C,D,E,X(15),X(15),X( 1),X( 7),X(12));
-
-	BODY_32_39(32,E,T,A,B,C,D,X( 0),X( 2),X( 8),X(13));
-	BODY_32_39(33,D,E,T,A,B,C,X( 1),X( 3),X( 9),X(14));
-	BODY_32_39(34,C,D,E,T,A,B,X( 2),X( 4),X(10),X(15));
-	BODY_32_39(35,B,C,D,E,T,A,X( 3),X( 5),X(11),X( 0));
-	BODY_32_39(36,A,B,C,D,E,T,X( 4),X( 6),X(12),X( 1));
-	BODY_32_39(37,T,A,B,C,D,E,X( 5),X( 7),X(13),X( 2));
-	BODY_32_39(38,E,T,A,B,C,D,X( 6),X( 8),X(14),X( 3));
-	BODY_32_39(39,D,E,T,A,B,C,X( 7),X( 9),X(15),X( 4));
-
-	BODY_40_59(40,C,D,E,T,A,B,X( 8),X(10),X( 0),X( 5));
-	BODY_40_59(41,B,C,D,E,T,A,X( 9),X(11),X( 1),X( 6));
-	BODY_40_59(42,A,B,C,D,E,T,X(10),X(12),X( 2),X( 7));
-	BODY_40_59(43,T,A,B,C,D,E,X(11),X(13),X( 3),X( 8));
-	BODY_40_59(44,E,T,A,B,C,D,X(12),X(14),X( 4),X( 9));
-	BODY_40_59(45,D,E,T,A,B,C,X(13),X(15),X( 5),X(10));
-	BODY_40_59(46,C,D,E,T,A,B,X(14),X( 0),X( 6),X(11));
-	BODY_40_59(47,B,C,D,E,T,A,X(15),X( 1),X( 7),X(12));
-	BODY_40_59(48,A,B,C,D,E,T,X( 0),X( 2),X( 8),X(13));
-	BODY_40_59(49,T,A,B,C,D,E,X( 1),X( 3),X( 9),X(14));
-	BODY_40_59(50,E,T,A,B,C,D,X( 2),X( 4),X(10),X(15));
-	BODY_40_59(51,D,E,T,A,B,C,X( 3),X( 5),X(11),X( 0));
-	BODY_40_59(52,C,D,E,T,A,B,X( 4),X( 6),X(12),X( 1));
-	BODY_40_59(53,B,C,D,E,T,A,X( 5),X( 7),X(13),X( 2));
-	BODY_40_59(54,A,B,C,D,E,T,X( 6),X( 8),X(14),X( 3));
-	BODY_40_59(55,T,A,B,C,D,E,X( 7),X( 9),X(15),X( 4));
-	BODY_40_59(56,E,T,A,B,C,D,X( 8),X(10),X( 0),X( 5));
-	BODY_40_59(57,D,E,T,A,B,C,X( 9),X(11),X( 1),X( 6));
-	BODY_40_59(58,C,D,E,T,A,B,X(10),X(12),X( 2),X( 7));
-	BODY_40_59(59,B,C,D,E,T,A,X(11),X(13),X( 3),X( 8));
-
-	BODY_60_79(60,A,B,C,D,E,T,X(12),X(14),X( 4),X( 9));
-	BODY_60_79(61,T,A,B,C,D,E,X(13),X(15),X( 5),X(10));
-	BODY_60_79(62,E,T,A,B,C,D,X(14),X( 0),X( 6),X(11));
-	BODY_60_79(63,D,E,T,A,B,C,X(15),X( 1),X( 7),X(12));
-	BODY_60_79(64,C,D,E,T,A,B,X( 0),X( 2),X( 8),X(13));
-	BODY_60_79(65,B,C,D,E,T,A,X( 1),X( 3),X( 9),X(14));
-	BODY_60_79(66,A,B,C,D,E,T,X( 2),X( 4),X(10),X(15));
-	BODY_60_79(67,T,A,B,C,D,E,X( 3),X( 5),X(11),X( 0));
-	BODY_60_79(68,E,T,A,B,C,D,X( 4),X( 6),X(12),X( 1));
-	BODY_60_79(69,D,E,T,A,B,C,X( 5),X( 7),X(13),X( 2));
-	BODY_60_79(70,C,D,E,T,A,B,X( 6),X( 8),X(14),X( 3));
-	BODY_60_79(71,B,C,D,E,T,A,X( 7),X( 9),X(15),X( 4));
-	BODY_60_79(72,A,B,C,D,E,T,X( 8),X(10),X( 0),X( 5));
-	BODY_60_79(73,T,A,B,C,D,E,X( 9),X(11),X( 1),X( 6));
-	BODY_60_79(74,E,T,A,B,C,D,X(10),X(12),X( 2),X( 7));
-	BODY_60_79(75,D,E,T,A,B,C,X(11),X(13),X( 3),X( 8));
-	BODY_60_79(76,C,D,E,T,A,B,X(12),X(14),X( 4),X( 9));
-	BODY_60_79(77,B,C,D,E,T,A,X(13),X(15),X( 5),X(10));
-	BODY_60_79(78,A,B,C,D,E,T,X(14),X( 0),X( 6),X(11));
-	BODY_60_79(79,T,A,B,C,D,E,X(15),X( 1),X( 7),X(12));
-	
-	c->h0=(c->h0+E)&0xffffffffL; 
-	c->h1=(c->h1+T)&0xffffffffL;
-	c->h2=(c->h2+A)&0xffffffffL;
-	c->h3=(c->h3+B)&0xffffffffL;
-	c->h4=(c->h4+C)&0xffffffffL;
-
-	if (--num == 0) break;
-
-	A=c->h0;
-	B=c->h1;
-	C=c->h2;
-	D=c->h3;
-	E=c->h4;
-
-		}
-	}
-#endif
-
-#else	/* OPENSSL_SMALL_FOOTPRINT */
-
-#define BODY_00_15(xi)		 do {	\
-	T=E+K_00_19+F_00_19(B,C,D);	\
-	E=D, D=C, C=ROTATE(B,30), B=A;	\
-	A=ROTATE(A,5)+T+xi;	    } while(0)
-
-#define BODY_16_19(xa,xb,xc,xd)	 do {	\
-	Xupdate(T,xa,xa,xb,xc,xd);	\
-	T+=E+K_00_19+F_00_19(B,C,D);	\
-	E=D, D=C, C=ROTATE(B,30), B=A;	\
-	A=ROTATE(A,5)+T;	    } while(0)
-
-#define BODY_20_39(xa,xb,xc,xd)	 do {	\
-	Xupdate(T,xa,xa,xb,xc,xd);	\
-	T+=E+K_20_39+F_20_39(B,C,D);	\
-	E=D, D=C, C=ROTATE(B,30), B=A;	\
-	A=ROTATE(A,5)+T;	    } while(0)
-
-#define BODY_40_59(xa,xb,xc,xd)	 do {	\
-	Xupdate(T,xa,xa,xb,xc,xd);	\
-	T+=E+K_40_59+F_40_59(B,C,D);	\
-	E=D, D=C, C=ROTATE(B,30), B=A;	\
-	A=ROTATE(A,5)+T;	    } while(0)
-
-#define BODY_60_79(xa,xb,xc,xd)	 do {	\
-	Xupdate(T,xa,xa,xb,xc,xd);	\
-	T=E+K_60_79+F_60_79(B,C,D);	\
-	E=D, D=C, C=ROTATE(B,30), B=A;	\
-	A=ROTATE(A,5)+T+xa;	    } while(0)
-
-#ifndef DONT_IMPLEMENT_BLOCK_HOST_ORDER
-void HASH_BLOCK_HOST_ORDER (SHA_CTX *c, const void *d, size_t num)
-	{
-	const SHA_LONG *W=d;
-	register unsigned MD32_REG_T A,B,C,D,E,T;
-	int i;
-	SHA_LONG	X[16];
-
-	A=c->h0;
-	B=c->h1;
-	C=c->h2;
-	D=c->h3;
-	E=c->h4;
-
-	for (;;)
-		{
-	for (i=0;i<16;i++)
-	{ X[i]=W[i]; BODY_00_15(X[i]); }
-	for (i=0;i<4;i++)
-	{ BODY_16_19(X[i],       X[i+2],      X[i+8],     X[(i+13)&15]); }
-	for (;i<24;i++)
-	{ BODY_20_39(X[i&15],    X[(i+2)&15], X[(i+8)&15],X[(i+13)&15]); }
-	for (i=0;i<20;i++)
-	{ BODY_40_59(X[(i+8)&15],X[(i+10)&15],X[i&15],    X[(i+5)&15]);  }
-	for (i=4;i<24;i++)
-	{ BODY_60_79(X[(i+8)&15],X[(i+10)&15],X[i&15],    X[(i+5)&15]);  }
-	
-	c->h0=(c->h0+A)&0xffffffffL; 
-	c->h1=(c->h1+B)&0xffffffffL;
-	c->h2=(c->h2+C)&0xffffffffL;
-	c->h3=(c->h3+D)&0xffffffffL;
-	c->h4=(c->h4+E)&0xffffffffL;
-
-	if (--num == 0) break;
-
-	A=c->h0;
-	B=c->h1;
-	C=c->h2;
-	D=c->h3;
-	E=c->h4;
-
-	W+=SHA_LBLOCK;
-		}
-	}
-#endif
-
-#ifndef DONT_IMPLEMENT_BLOCK_DATA_ORDER
-void HASH_BLOCK_DATA_ORDER (SHA_CTX *c, const void *p, size_t num)
-	{
-	const unsigned char *data=p;
-	register unsigned MD32_REG_T A,B,C,D,E,T,l;
-	int i;
-	SHA_LONG	X[16];
-
-	A=c->h0;
-	B=c->h1;
-	C=c->h2;
-	D=c->h3;
-	E=c->h4;
-
-	for (;;)
-		{
-	for (i=0;i<16;i++)
-	{ HOST_c2l(data,l); X[i]=l; BODY_00_15(X[i]); }
-	for (i=0;i<4;i++)
-	{ BODY_16_19(X[i],       X[i+2],      X[i+8],     X[(i+13)&15]); }
-	for (;i<24;i++)
-	{ BODY_20_39(X[i&15],    X[(i+2)&15], X[(i+8)&15],X[(i+13)&15]); }
-	for (i=0;i<20;i++)
-	{ BODY_40_59(X[(i+8)&15],X[(i+10)&15],X[i&15],    X[(i+5)&15]);  }
-	for (i=4;i<24;i++)
-	{ BODY_60_79(X[(i+8)&15],X[(i+10)&15],X[i&15],    X[(i+5)&15]);  }
-
-	c->h0=(c->h0+A)&0xffffffffL; 
-	c->h1=(c->h1+B)&0xffffffffL;
-	c->h2=(c->h2+C)&0xffffffffL;
-	c->h3=(c->h3+D)&0xffffffffL;
-	c->h4=(c->h4+E)&0xffffffffL;
-
-	if (--num == 0) break;
-
-	A=c->h0;
-	B=c->h1;
-	C=c->h2;
-	D=c->h3;
-	E=c->h4;
-
-		}
-	}
-#endif
-
-#endif
diff --git a/crypto/openssl/crypto/sha/sha_one.c b/crypto/openssl/crypto/sha/sha_one.c
deleted file mode 100644
index 3bae623ce882..000000000000
--- a/crypto/openssl/crypto/sha/sha_one.c
+++ /dev/null
@@ -1,78 +0,0 @@
-/* crypto/sha/sha_one.c */
-/* Copyright (C) 1995-1998 Eric Young (eay@cryptsoft.com)
- * All rights reserved.
- *
- * This package is an SSL implementation written
- * by Eric Young (eay@cryptsoft.com).
- * The implementation was written so as to conform with Netscapes SSL.
- * 
- * This library is free for commercial and non-commercial use as long as
- * the following conditions are aheared to.  The following conditions
- * apply to all code found in this distribution, be it the RC4, RSA,
- * lhash, DES, etc., code; not just the SSL code.  The SSL documentation
- * included with this distribution is covered by the same copyright terms
- * except that the holder is Tim Hudson (tjh@cryptsoft.com).
- * 
- * Copyright remains Eric Young's, and as such any Copyright notices in
- * the code are not to be removed.
- * If this package is used in a product, Eric Young should be given attribution
- * as the author of the parts of the library used.
- * This can be in the form of a textual message at program startup or
- * in documentation (online or textual) provided with the package.
- * 
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions
- * are met:
- * 1. Redistributions of source code must retain the copyright
- *    notice, this list of conditions and the following disclaimer.
- * 2. Redistributions in binary form must reproduce the above copyright
- *    notice, this list of conditions and the following disclaimer in the
- *    documentation and/or other materials provided with the distribution.
- * 3. All advertising materials mentioning features or use of this software
- *    must display the following acknowledgement:
- *    "This product includes cryptographic software written by
- *     Eric Young (eay@cryptsoft.com)"
- *    The word 'cryptographic' can be left out if the rouines from the library
- *    being used are not cryptographic related :-).
- * 4. If you include any Windows specific code (or a derivative thereof) from 
- *    the apps directory (application code) you must include an acknowledgement:
- *    "This product includes software written by Tim Hudson (tjh@cryptsoft.com)"
- * 
- * THIS SOFTWARE IS PROVIDED BY ERIC YOUNG ``AS IS'' AND
- * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
- * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
- * ARE DISCLAIMED.  IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE
- * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
- * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
- * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
- * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
- * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
- * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
- * SUCH DAMAGE.
- * 
- * The licence and distribution terms for any publically available version or
- * derivative of this code cannot be changed.  i.e. this code cannot simply be
- * copied and put under another distribution licence
- * [including the GNU Public Licence.]
- */
-
-#include <stdio.h>
-#include <string.h>
-#include <openssl/sha.h>
-#include <openssl/crypto.h>
-
-#ifndef OPENSSL_NO_SHA0
-unsigned char *SHA(const unsigned char *d, size_t n, unsigned char *md)
-	{
-	SHA_CTX c;
-	static unsigned char m[SHA_DIGEST_LENGTH];
-
-	if (md == NULL) md=m;
-	if (!SHA_Init(&c))
-		return NULL;
-	SHA_Update(&c,d,n);
-	SHA_Final(md,&c);
-	OPENSSL_cleanse(&c,sizeof(c));
-	return(md);
-	}
-#endif
diff --git a/crypto/openssl/crypto/sha/shatest.c b/crypto/openssl/crypto/sha/shatest.c
deleted file mode 100644
index bfb11f0a5f2c..000000000000
--- a/crypto/openssl/crypto/sha/shatest.c
+++ /dev/null
@@ -1,178 +0,0 @@
-/* crypto/sha/shatest.c */
-/* Copyright (C) 1995-1998 Eric Young (eay@cryptsoft.com)
- * All rights reserved.
- *
- * This package is an SSL implementation written
- * by Eric Young (eay@cryptsoft.com).
- * The implementation was written so as to conform with Netscapes SSL.
- * 
- * This library is free for commercial and non-commercial use as long as
- * the following conditions are aheared to.  The following conditions
- * apply to all code found in this distribution, be it the RC4, RSA,
- * lhash, DES, etc., code; not just the SSL code.  The SSL documentation
- * included with this distribution is covered by the same copyright terms
- * except that the holder is Tim Hudson (tjh@cryptsoft.com).
- * 
- * Copyright remains Eric Young's, and as such any Copyright notices in
- * the code are not to be removed.
- * If this package is used in a product, Eric Young should be given attribution
- * as the author of the parts of the library used.
- * This can be in the form of a textual message at program startup or
- * in documentation (online or textual) provided with the package.
- * 
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions
- * are met:
- * 1. Redistributions of source code must retain the copyright
- *    notice, this list of conditions and the following disclaimer.
- * 2. Redistributions in binary form must reproduce the above copyright
- *    notice, this list of conditions and the following disclaimer in the
- *    documentation and/or other materials provided with the distribution.
- * 3. All advertising materials mentioning features or use of this software
- *    must display the following acknowledgement:
- *    "This product includes cryptographic software written by
- *     Eric Young (eay@cryptsoft.com)"
- *    The word 'cryptographic' can be left out if the rouines from the library
- *    being used are not cryptographic related :-).
- * 4. If you include any Windows specific code (or a derivative thereof) from 
- *    the apps directory (application code) you must include an acknowledgement:
- *    "This product includes software written by Tim Hudson (tjh@cryptsoft.com)"
- * 
- * THIS SOFTWARE IS PROVIDED BY ERIC YOUNG ``AS IS'' AND
- * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
- * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
- * ARE DISCLAIMED.  IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE
- * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
- * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
- * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
- * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
- * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
- * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
- * SUCH DAMAGE.
- * 
- * The licence and distribution terms for any publically available version or
- * derivative of this code cannot be changed.  i.e. this code cannot simply be
- * copied and put under another distribution licence
- * [including the GNU Public Licence.]
- */
-
-#include <stdio.h>
-#include <string.h>
-#include <stdlib.h>
-
-#include "../e_os.h"
-
-#if defined(OPENSSL_NO_SHA) || defined(OPENSSL_NO_SHA0)
-int main(int argc, char *argv[])
-{
-    printf("No SHA0 support\n");
-    return(0);
-}
-#else
-#include <openssl/evp.h>
-#include <openssl/sha.h>
-
-#ifdef CHARSET_EBCDIC
-#include <openssl/ebcdic.h>
-#endif
-
-#define SHA_0 /* FIPS 180 */
-#undef  SHA_1 /* FIPS 180-1 */
-
-static char *test[]={
-	"abc",
-	"abcdbcdecdefdefgefghfghighijhijkijkljklmklmnlmnomnopnopq",
-	NULL,
-	};
-
-#ifdef SHA_0
-static char *ret[]={
-	"0164b8a914cd2a5e74c4f7ff082c4d97f1edf880",
-	"d2516ee1acfa5baf33dfc1c471e438449ef134c8",
-	};
-static char *bigret=
-	"3232affa48628a26653b5aaa44541fd90d690603";
-#endif
-#ifdef SHA_1
-static char *ret[]={
-	"a9993e364706816aba3e25717850c26c9cd0d89d",
-	"84983e441c3bd26ebaae4aa1f95129e5e54670f1",
-	};
-static char *bigret=
-	"34aa973cd4c4daa4f61eeb2bdbad27316534016f";
-#endif
-
-static char *pt(unsigned char *md);
-int main(int argc, char *argv[])
-	{
-	int i,err=0;
-	unsigned char **P,**R;
-	static unsigned char buf[1000];
-	char *p,*r;
-	EVP_MD_CTX c;
-	unsigned char md[SHA_DIGEST_LENGTH];
-
-#ifdef CHARSET_EBCDIC
-	ebcdic2ascii(test[0], test[0], strlen(test[0]));
-	ebcdic2ascii(test[1], test[1], strlen(test[1]));
-#endif
-
-	EVP_MD_CTX_init(&c);
-	P=(unsigned char **)test;
-	R=(unsigned char **)ret;
-	i=1;
-	while (*P != NULL)
-		{
-		EVP_Digest(*P,strlen((char *)*P),md,NULL,EVP_sha(), NULL);
-		p=pt(md);
-		if (strcmp(p,(char *)*R) != 0)
-			{
-			printf("error calculating SHA on '%s'\n",*P);
-			printf("got %s instead of %s\n",p,*R);
-			err++;
-			}
-		else
-			printf("test %d ok\n",i);
-		i++;
-		R++;
-		P++;
-		}
-
-	memset(buf,'a',1000);
-#ifdef CHARSET_EBCDIC
-	ebcdic2ascii(buf, buf, 1000);
-#endif /*CHARSET_EBCDIC*/
-	EVP_DigestInit_ex(&c,EVP_sha(), NULL);
-	for (i=0; i<1000; i++)
-		EVP_DigestUpdate(&c,buf,1000);
-	EVP_DigestFinal_ex(&c,md,NULL);
-	p=pt(md);
-
-	r=bigret;
-	if (strcmp(p,r) != 0)
-		{
-		printf("error calculating SHA on '%s'\n",p);
-		printf("got %s instead of %s\n",p,r);
-		err++;
-		}
-	else
-		printf("test 3 ok\n");
-
-#ifdef OPENSSL_SYS_NETWARE
-    if (err) printf("ERROR: %d\n", err);
-#endif
-	EVP_MD_CTX_cleanup(&c);
-	EXIT(err);
-	return(0);
-	}
-
-static char *pt(unsigned char *md)
-	{
-	int i;
-	static char buf[80];
-
-	for (i=0; i<SHA_DIGEST_LENGTH; i++)
-		sprintf(&(buf[i*2]),"%02x",md[i]);
-	return(buf);
-	}
-#endif
diff --git a/crypto/openssl/crypto/sparccpuid.S b/crypto/openssl/crypto/sparccpuid.S
deleted file mode 100644
index c17350fc89e0..000000000000
--- a/crypto/openssl/crypto/sparccpuid.S
+++ /dev/null
@@ -1,239 +0,0 @@
-#if defined(__SUNPRO_C) && defined(__sparcv9)
-# define ABI64  /* They've said -xarch=v9 at command line */
-#elif defined(__GNUC__) && defined(__arch64__)
-# define ABI64  /* They've said -m64 at command line */
-#endif
-
-#ifdef ABI64
-  .register	%g2,#scratch
-  .register	%g3,#scratch
-# define	FRAME	-192
-# define	BIAS	2047
-#else
-# define	FRAME	-96
-# define	BIAS	0
-#endif
-
-.text
-.align	32
-.global	OPENSSL_wipe_cpu
-.type	OPENSSL_wipe_cpu,#function
-! Keep in mind that this does not excuse us from wiping the stack!
-! This routine wipes registers, but not the backing store [which
-! resides on the stack, toward lower addresses]. To facilitate for
-! stack wiping I return pointer to the top of stack of the *caller*.
-OPENSSL_wipe_cpu:
-	save	%sp,FRAME,%sp
-	nop
-#ifdef __sun
-#include <sys/trap.h>
-	ta	ST_CLEAN_WINDOWS
-#else
-	call	.walk.reg.wins
-#endif
-	nop
-	call	.PIC.zero.up
-	mov	.zero-(.-4),%o0
-	ldd	[%o0],%f0
-
-	subcc	%g0,1,%o0
-	! Following is V9 "rd %ccr,%o0" instruction. However! V8
-	! specification says that it ("rd %asr2,%o0" in V8 terms) does
-	! not cause illegal_instruction trap. It therefore can be used
-	! to determine if the CPU the code is executing on is V8- or
-	! V9-compliant, as V9 returns a distinct value of 0x99,
-	! "negative" and "borrow" bits set in both %icc and %xcc.
-	.word	0x91408000	!rd	%ccr,%o0
-	cmp	%o0,0x99
-	bne	.v8
-	nop
-			! Even though we do not use %fp register bank,
-			! we wipe it as memcpy might have used it...
-			.word	0xbfa00040	!fmovd	%f0,%f62
-			.word	0xbba00040	!...
-			.word	0xb7a00040
-			.word	0xb3a00040
-			.word	0xafa00040
-			.word	0xaba00040
-			.word	0xa7a00040
-			.word	0xa3a00040
-			.word	0x9fa00040
-			.word	0x9ba00040
-			.word	0x97a00040
-			.word	0x93a00040
-			.word	0x8fa00040
-			.word	0x8ba00040
-			.word	0x87a00040
-			.word	0x83a00040	!fmovd	%f0,%f32
-.v8:			fmovs	%f1,%f31
-	clr	%o0
-			fmovs	%f0,%f30
-	clr	%o1
-			fmovs	%f1,%f29
-	clr	%o2
-			fmovs	%f0,%f28
-	clr	%o3
-			fmovs	%f1,%f27
-	clr	%o4
-			fmovs	%f0,%f26
-	clr	%o5
-			fmovs	%f1,%f25
-	clr	%o7
-			fmovs	%f0,%f24
-	clr	%l0
-			fmovs	%f1,%f23
-	clr	%l1
-			fmovs	%f0,%f22
-	clr	%l2
-			fmovs	%f1,%f21
-	clr	%l3
-			fmovs	%f0,%f20
-	clr	%l4
-			fmovs	%f1,%f19
-	clr	%l5
-			fmovs	%f0,%f18
-	clr	%l6
-			fmovs	%f1,%f17
-	clr	%l7
-			fmovs	%f0,%f16
-	clr	%i0
-			fmovs	%f1,%f15
-	clr	%i1
-			fmovs	%f0,%f14
-	clr	%i2
-			fmovs	%f1,%f13
-	clr	%i3
-			fmovs	%f0,%f12
-	clr	%i4
-			fmovs	%f1,%f11
-	clr	%i5
-			fmovs	%f0,%f10
-	clr	%g1
-			fmovs	%f1,%f9
-	clr	%g2
-			fmovs	%f0,%f8
-	clr	%g3
-			fmovs	%f1,%f7
-	clr	%g4
-			fmovs	%f0,%f6
-	clr	%g5
-			fmovs	%f1,%f5
-			fmovs	%f0,%f4
-			fmovs	%f1,%f3
-			fmovs	%f0,%f2
-
-	add	%fp,BIAS,%i0	! return pointer to caller´s top of stack
-
-	ret
-	restore
-
-.zero:	.long	0x0,0x0
-.PIC.zero.up:
-	retl
-	add	%o0,%o7,%o0
-#ifdef DEBUG
-.global	walk_reg_wins
-.type	walk_reg_wins,#function
-walk_reg_wins:
-#endif
-.walk.reg.wins:
-	save	%sp,FRAME,%sp
-	cmp	%i7,%o7
-	be	2f
-	clr	%o0
-	cmp	%o7,0	! compiler never cleans %o7...
-	be	1f	! could have been a leaf function...
-	clr	%o1
-	call	.walk.reg.wins
-	nop
-1:	clr	%o2
-	clr	%o3
-	clr	%o4
-	clr	%o5
-	clr	%o7
-	clr	%l0
-	clr	%l1
-	clr	%l2
-	clr	%l3
-	clr	%l4
-	clr	%l5
-	clr	%l6
-	clr	%l7
-	add	%o0,1,%i0	! used for debugging
-2:	ret
-	restore
-.size	OPENSSL_wipe_cpu,.-OPENSSL_wipe_cpu
-
-.global	OPENSSL_atomic_add
-.type	OPENSSL_atomic_add,#function
-OPENSSL_atomic_add:
-#ifndef ABI64
-	subcc	%g0,1,%o2
-	.word	0x95408000	!rd	%ccr,%o2, see comment above
-	cmp	%o2,0x99
-	be	.v9
-	nop
-	save	%sp,FRAME,%sp
-	ba	.enter
-	nop
-#ifdef __sun
-! Note that you don't have to link with libthread to call thr_yield,
-! as libc provides a stub, which is overloaded the moment you link
-! with *either* libpthread or libthread...
-#define	YIELD_CPU	thr_yield
-#else
-! applies at least to Linux and FreeBSD... Feedback expected...
-#define	YIELD_CPU	sched_yield
-#endif
-.spin:	call	YIELD_CPU
-	nop
-.enter:	ld	[%i0],%i2
-	cmp	%i2,-4096
-	be	.spin
-	mov	-1,%i2
-	swap	[%i0],%i2
-	cmp	%i2,-1
-	be	.spin
-	add	%i2,%i1,%i2
-	stbar
-	st	%i2,[%i0]
-	sra	%i2,%g0,%i0
-	ret
-	restore
-.v9:
-#endif
-	ld	[%o0],%o2
-1:	add	%o1,%o2,%o3
-	.word	0xd7e2100a	!cas [%o0],%o2,%o3, compare [%o0] with %o2 and swap %o3
-	cmp	%o2,%o3
-	bne	1b
-	mov	%o3,%o2		! cas is always fetching to dest. register
-	add	%o1,%o2,%o0	! OpenSSL expects the new value
-	retl
-	sra	%o0,%g0,%o0	! we return signed int, remember?
-.size	OPENSSL_atomic_add,.-OPENSSL_atomic_add
-
-.global	OPENSSL_rdtsc
-	subcc	%g0,1,%o0
-	.word	0x91408000	!rd	%ccr,%o0
-	cmp	%o0,0x99
-	bne	.notsc
-	xor	%o0,%o0,%o0
-	save	%sp,FRAME-16,%sp
-	mov	513,%o0		!SI_PLATFORM
-	add	%sp,BIAS+16,%o1
-	call	sysinfo
-	mov	256,%o2
-
-	add	%sp,BIAS-16,%o1
-	ld	[%o1],%l0
-	ld	[%o1+4],%l1
-	ld	[%o1+8],%l2
-	mov	%lo('SUNW'),%l3
-	ret
-	restore
-.notsc:
-	retl
-	nop
-.type	OPENSSL_rdtsc,#function
-.size	OPENSSL_rdtsc,.-OPENSSL_atomic_add
diff --git a/crypto/openssl/crypto/stack/Makefile b/crypto/openssl/crypto/stack/Makefile
deleted file mode 100644
index 5327692ac895..000000000000
--- a/crypto/openssl/crypto/stack/Makefile
+++ /dev/null
@@ -1,84 +0,0 @@
-#
-# OpenSSL/crypto/stack/Makefile
-#
-
-DIR=	stack
-TOP=	../..
-CC=	cc
-INCLUDES=
-CFLAG=-g
-MAKEFILE=	Makefile
-AR=		ar r
-
-CFLAGS= $(INCLUDES) $(CFLAG)
-
-GENERAL=Makefile
-TEST=
-APPS=
-
-LIB=$(TOP)/libcrypto.a
-LIBSRC=stack.c
-LIBOBJ=stack.o
-
-SRC= $(LIBSRC)
-
-EXHEADER= stack.h safestack.h
-HEADER=	$(EXHEADER)
-
-ALL=    $(GENERAL) $(SRC) $(HEADER)
-
-top:
-	(cd ../..; $(MAKE) DIRS=crypto SDIRS=$(DIR) sub_all)
-
-all:	lib
-
-lib:	$(LIBOBJ)
-	$(AR) $(LIB) $(LIBOBJ)
-	$(RANLIB) $(LIB) || echo Never mind.
-	@touch lib
-
-files:
-	$(PERL) $(TOP)/util/files.pl Makefile >> $(TOP)/MINFO
-
-links:
-	@$(PERL) $(TOP)/util/mklink.pl ../../include/openssl $(EXHEADER)
-	@$(PERL) $(TOP)/util/mklink.pl ../../test $(TEST)
-	@$(PERL) $(TOP)/util/mklink.pl ../../apps $(APPS)
-
-install:
-	@[ -n "$(INSTALLTOP)" ] # should be set by top Makefile...
-	@headerlist="$(EXHEADER)"; for i in $$headerlist ; \
-	do  \
-	(cp $$i $(INSTALL_PREFIX)$(INSTALLTOP)/include/openssl/$$i; \
-	chmod 644 $(INSTALL_PREFIX)$(INSTALLTOP)/include/openssl/$$i ); \
-	done;
-
-tags:
-	ctags $(SRC)
-
-tests:
-
-lint:
-	lint -DLINT $(INCLUDES) $(SRC)>fluff
-
-depend:
-	@[ -n "$(MAKEDEPEND)" ] # should be set by upper Makefile...
-	$(MAKEDEPEND) -- $(CFLAG) $(INCLUDES) $(DEPFLAG) -- $(PROGS) $(LIBSRC)
-
-dclean:
-	$(PERL) -pe 'if (/^# DO NOT DELETE THIS LINE/) {print; exit(0);}' $(MAKEFILE) >Makefile.new
-	mv -f Makefile.new $(MAKEFILE)
-
-clean:
-	rm -f *.o *.obj lib tags core .pure .nfs* *.old *.bak fluff
-
-# DO NOT DELETE THIS LINE -- make depend depends on it.
-
-stack.o: ../../e_os.h ../../include/openssl/asn1.h ../../include/openssl/bio.h
-stack.o: ../../include/openssl/buffer.h ../../include/openssl/crypto.h
-stack.o: ../../include/openssl/e_os2.h ../../include/openssl/err.h
-stack.o: ../../include/openssl/lhash.h ../../include/openssl/obj_mac.h
-stack.o: ../../include/openssl/objects.h ../../include/openssl/opensslconf.h
-stack.o: ../../include/openssl/opensslv.h ../../include/openssl/ossl_typ.h
-stack.o: ../../include/openssl/safestack.h ../../include/openssl/stack.h
-stack.o: ../../include/openssl/symhacks.h ../cryptlib.h stack.c
diff --git a/crypto/openssl/crypto/stack/safestack.h b/crypto/openssl/crypto/stack/safestack.h
deleted file mode 100644
index d496f365c270..000000000000
--- a/crypto/openssl/crypto/stack/safestack.h
+++ /dev/null
@@ -1,1850 +0,0 @@
-/* ====================================================================
- * Copyright (c) 1999 The OpenSSL Project.  All rights reserved.
- *
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions
- * are met:
- *
- * 1. Redistributions of source code must retain the above copyright
- *    notice, this list of conditions and the following disclaimer. 
- *
- * 2. Redistributions in binary form must reproduce the above copyright
- *    notice, this list of conditions and the following disclaimer in
- *    the documentation and/or other materials provided with the
- *    distribution.
- *
- * 3. All advertising materials mentioning features or use of this
- *    software must display the following acknowledgment:
- *    "This product includes software developed by the OpenSSL Project
- *    for use in the OpenSSL Toolkit. (http://www.openssl.org/)"
- *
- * 4. The names "OpenSSL Toolkit" and "OpenSSL Project" must not be used to
- *    endorse or promote products derived from this software without
- *    prior written permission. For written permission, please contact
- *    openssl-core@openssl.org.
- *
- * 5. Products derived from this software may not be called "OpenSSL"
- *    nor may "OpenSSL" appear in their names without prior written
- *    permission of the OpenSSL Project.
- *
- * 6. Redistributions of any form whatsoever must retain the following
- *    acknowledgment:
- *    "This product includes software developed by the OpenSSL Project
- *    for use in the OpenSSL Toolkit (http://www.openssl.org/)"
- *
- * THIS SOFTWARE IS PROVIDED BY THE OpenSSL PROJECT ``AS IS'' AND ANY
- * EXPRESSED OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
- * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR
- * PURPOSE ARE DISCLAIMED.  IN NO EVENT SHALL THE OpenSSL PROJECT OR
- * ITS CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
- * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
- * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
- * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
- * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
- * STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
- * ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED
- * OF THE POSSIBILITY OF SUCH DAMAGE.
- * ====================================================================
- *
- * This product includes cryptographic software written by Eric Young
- * (eay@cryptsoft.com).  This product includes software written by Tim
- * Hudson (tjh@cryptsoft.com).
- *
- */
-
-#ifndef HEADER_SAFESTACK_H
-#define HEADER_SAFESTACK_H
-
-#include <openssl/stack.h>
-
-typedef void (*openssl_fptr)(void);
-#define openssl_fcast(f) ((openssl_fptr)f)
-
-#ifdef DEBUG_SAFESTACK
-
-#define STACK_OF(type) struct stack_st_##type
-#define PREDECLARE_STACK_OF(type) STACK_OF(type);
-
-#define DECLARE_STACK_OF(type) \
-STACK_OF(type) \
-    { \
-    STACK stack; \
-    };
-
-#define IMPLEMENT_STACK_OF(type) /* nada (obsolete in new safestack approach)*/
-
-/* SKM_sk_... stack macros are internal to safestack.h:
- * never use them directly, use sk_<type>_... instead */
-#define SKM_sk_new(type, cmp) \
-	((STACK_OF(type) * (*)(int (*)(const type * const *, const type * const *)))openssl_fcast(sk_new))(cmp)
-#define SKM_sk_new_null(type) \
-	((STACK_OF(type) * (*)(void))openssl_fcast(sk_new_null))()
-#define SKM_sk_free(type, st) \
-	((void (*)(STACK_OF(type) *))openssl_fcast(sk_free))(st)
-#define SKM_sk_num(type, st) \
-	((int (*)(const STACK_OF(type) *))openssl_fcast(sk_num))(st)
-#define SKM_sk_value(type, st,i) \
-	((type * (*)(const STACK_OF(type) *, int))openssl_fcast(sk_value))(st, i)
-#define SKM_sk_set(type, st,i,val) \
-	((type * (*)(STACK_OF(type) *, int, type *))openssl_fcast(sk_set))(st, i, val)
-#define SKM_sk_zero(type, st) \
-	((void (*)(STACK_OF(type) *))openssl_fcast(sk_zero))(st)
-#define SKM_sk_push(type, st,val) \
-	((int (*)(STACK_OF(type) *, type *))openssl_fcast(sk_push))(st, val)
-#define SKM_sk_unshift(type, st,val) \
-	((int (*)(STACK_OF(type) *, type *))openssl_fcast(sk_unshift))(st, val)
-#define SKM_sk_find(type, st,val) \
-	((int (*)(STACK_OF(type) *, type *))openssl_fcast(sk_find))(st, val)
-#define SKM_sk_delete(type, st,i) \
-	((type * (*)(STACK_OF(type) *, int))openssl_fcast(sk_delete))(st, i)
-#define SKM_sk_delete_ptr(type, st,ptr) \
-	((type * (*)(STACK_OF(type) *, type *))openssl_fcast(sk_delete_ptr))(st, ptr)
-#define SKM_sk_insert(type, st,val,i) \
-	((int (*)(STACK_OF(type) *, type *, int))openssl_fcast(sk_insert))(st, val, i)
-#define SKM_sk_set_cmp_func(type, st,cmp) \
-	((int (*(*)(STACK_OF(type) *, int (*)(const type * const *, const type * const *))) \
-	  (const type * const *, const type * const *))openssl_fcast(sk_set_cmp_func))\
-	(st, cmp)
-#define SKM_sk_dup(type, st) \
-	((STACK_OF(type) *(*)(STACK_OF(type) *))openssl_fcast(sk_dup))(st)
-#define SKM_sk_pop_free(type, st,free_func) \
-	((void (*)(STACK_OF(type) *, void (*)(type *)))openssl_fcast(sk_pop_free))\
-	(st, free_func)
-#define SKM_sk_shift(type, st) \
-	((type * (*)(STACK_OF(type) *))openssl_fcast(sk_shift))(st)
-#define SKM_sk_pop(type, st) \
-	((type * (*)(STACK_OF(type) *))openssl_fcast(sk_pop))(st)
-#define SKM_sk_sort(type, st) \
-	((void (*)(STACK_OF(type) *))openssl_fcast(sk_sort))(st)
-#define SKM_sk_is_sorted(type, st) \
-	((int (*)(const STACK_OF(type) *))openssl_fcast(sk_is_sorted))(st)
-
-#define	SKM_ASN1_SET_OF_d2i(type, st, pp, length, d2i_func, free_func, ex_tag, ex_class) \
-((STACK_OF(type) * (*) (STACK_OF(type) **,const unsigned char **, long , \
-                         type *(*)(type **, const unsigned char **,long), \
-                                void (*)(type *), int ,int )) openssl_fcast(d2i_ASN1_SET)) \
-			(st,pp,length, d2i_func, free_func, ex_tag,ex_class)
-#define	SKM_ASN1_SET_OF_i2d(type, st, pp, i2d_func, ex_tag, ex_class, is_set) \
-	((int (*)(STACK_OF(type) *,unsigned char **, \
-        int (*)(type *,unsigned char **), int , int , int)) openssl_fcast(i2d_ASN1_SET)) \
-						(st,pp,i2d_func,ex_tag,ex_class,is_set)
-
-#define	SKM_ASN1_seq_pack(type, st, i2d_func, buf, len) \
-	((unsigned char *(*)(STACK_OF(type) *, \
-        int (*)(type *,unsigned char **), unsigned char **,int *)) openssl_fcast(ASN1_seq_pack)) \
-				(st, i2d_func, buf, len)
-#define	SKM_ASN1_seq_unpack(type, buf, len, d2i_func, free_func) \
-	((STACK_OF(type) * (*)(const unsigned char *,int, \
-                              type *(*)(type **,const unsigned char **, long), \
-                              void (*)(type *)))openssl_fcast(ASN1_seq_unpack)) \
-					(buf,len,d2i_func, free_func)
-
-#define SKM_PKCS12_decrypt_d2i(type, algor, d2i_func, free_func, pass, passlen, oct, seq) \
-	((STACK_OF(type) * (*)(X509_ALGOR *, \
-            		type *(*)(type **, const unsigned char **, long), \
-				void (*)(type *), \
-                                const char *, int, \
-                                ASN1_STRING *, int))PKCS12_decrypt_d2i) \
-				(algor,d2i_func,free_func,pass,passlen,oct,seq)
-
-#else
-
-#define STACK_OF(type) STACK
-#define PREDECLARE_STACK_OF(type) /* nada */
-#define DECLARE_STACK_OF(type)    /* nada */
-#define IMPLEMENT_STACK_OF(type)  /* nada */
-
-#define SKM_sk_new(type, cmp) \
-	sk_new((int (*)(const char * const *, const char * const *))(cmp))
-#define SKM_sk_new_null(type) \
-	sk_new_null()
-#define SKM_sk_free(type, st) \
-	sk_free(st)
-#define SKM_sk_num(type, st) \
-	sk_num(st)
-#define SKM_sk_value(type, st,i) \
-	((type *)sk_value(st, i))
-#define SKM_sk_set(type, st,i,val) \
-	((type *)sk_set(st, i,(char *)val))
-#define SKM_sk_zero(type, st) \
-	sk_zero(st)
-#define SKM_sk_push(type, st,val) \
-	sk_push(st, (char *)val)
-#define SKM_sk_unshift(type, st,val) \
-	sk_unshift(st, val)
-#define SKM_sk_find(type, st,val) \
-	sk_find(st, (char *)val)
-#define SKM_sk_delete(type, st,i) \
-	((type *)sk_delete(st, i))
-#define SKM_sk_delete_ptr(type, st,ptr) \
-	((type *)sk_delete_ptr(st,(char *)ptr))
-#define SKM_sk_insert(type, st,val,i) \
-	sk_insert(st, (char *)val, i)
-#define SKM_sk_set_cmp_func(type, st,cmp) \
-	((int (*)(const type * const *,const type * const *)) \
-	sk_set_cmp_func(st, (int (*)(const char * const *, const char * const *))(cmp)))
-#define SKM_sk_dup(type, st) \
-	sk_dup(st)
-#define SKM_sk_pop_free(type, st,free_func) \
-	sk_pop_free(st, (void (*)(void *))free_func)
-#define SKM_sk_shift(type, st) \
-	((type *)sk_shift(st))
-#define SKM_sk_pop(type, st) \
-	((type *)sk_pop(st))
-#define SKM_sk_sort(type, st) \
-	sk_sort(st)
-#define SKM_sk_is_sorted(type, st) \
-	sk_is_sorted(st)
-
-#define	SKM_ASN1_SET_OF_d2i(type, st, pp, length, d2i_func, free_func, ex_tag, ex_class) \
-	d2i_ASN1_SET(st,pp,length, (void *(*)(void ** ,const unsigned char ** ,long))d2i_func, (void (*)(void *))free_func, ex_tag,ex_class)
-#define	SKM_ASN1_SET_OF_i2d(type, st, pp, i2d_func, ex_tag, ex_class, is_set) \
-	i2d_ASN1_SET(st,pp,(int (*)(void *, unsigned char **))i2d_func,ex_tag,ex_class,is_set)
-
-#define	SKM_ASN1_seq_pack(type, st, i2d_func, buf, len) \
-	ASN1_seq_pack(st, (int (*)(void *, unsigned char **))i2d_func, buf, len)
-#define	SKM_ASN1_seq_unpack(type, buf, len, d2i_func, free_func) \
-	ASN1_seq_unpack(buf,len,(void *(*)(void **,const unsigned char **,long))d2i_func, (void(*)(void *))free_func)
-
-#define SKM_PKCS12_decrypt_d2i(type, algor, d2i_func, free_func, pass, passlen, oct, seq) \
-	((STACK *)PKCS12_decrypt_d2i(algor,(char *(*)())d2i_func, (void(*)(void *))free_func,pass,passlen,oct,seq))
-
-#endif
-
-/* This block of defines is updated by util/mkstack.pl, please do not touch! */
-#define sk_ACCESS_DESCRIPTION_new(st) SKM_sk_new(ACCESS_DESCRIPTION, (st))
-#define sk_ACCESS_DESCRIPTION_new_null() SKM_sk_new_null(ACCESS_DESCRIPTION)
-#define sk_ACCESS_DESCRIPTION_free(st) SKM_sk_free(ACCESS_DESCRIPTION, (st))
-#define sk_ACCESS_DESCRIPTION_num(st) SKM_sk_num(ACCESS_DESCRIPTION, (st))
-#define sk_ACCESS_DESCRIPTION_value(st, i) SKM_sk_value(ACCESS_DESCRIPTION, (st), (i))
-#define sk_ACCESS_DESCRIPTION_set(st, i, val) SKM_sk_set(ACCESS_DESCRIPTION, (st), (i), (val))
-#define sk_ACCESS_DESCRIPTION_zero(st) SKM_sk_zero(ACCESS_DESCRIPTION, (st))
-#define sk_ACCESS_DESCRIPTION_push(st, val) SKM_sk_push(ACCESS_DESCRIPTION, (st), (val))
-#define sk_ACCESS_DESCRIPTION_unshift(st, val) SKM_sk_unshift(ACCESS_DESCRIPTION, (st), (val))
-#define sk_ACCESS_DESCRIPTION_find(st, val) SKM_sk_find(ACCESS_DESCRIPTION, (st), (val))
-#define sk_ACCESS_DESCRIPTION_find_ex(st, val) SKM_sk_find_ex(ACCESS_DESCRIPTION, (st), (val))
-#define sk_ACCESS_DESCRIPTION_delete(st, i) SKM_sk_delete(ACCESS_DESCRIPTION, (st), (i))
-#define sk_ACCESS_DESCRIPTION_delete_ptr(st, ptr) SKM_sk_delete_ptr(ACCESS_DESCRIPTION, (st), (ptr))
-#define sk_ACCESS_DESCRIPTION_insert(st, val, i) SKM_sk_insert(ACCESS_DESCRIPTION, (st), (val), (i))
-#define sk_ACCESS_DESCRIPTION_set_cmp_func(st, cmp) SKM_sk_set_cmp_func(ACCESS_DESCRIPTION, (st), (cmp))
-#define sk_ACCESS_DESCRIPTION_dup(st) SKM_sk_dup(ACCESS_DESCRIPTION, st)
-#define sk_ACCESS_DESCRIPTION_pop_free(st, free_func) SKM_sk_pop_free(ACCESS_DESCRIPTION, (st), (free_func))
-#define sk_ACCESS_DESCRIPTION_shift(st) SKM_sk_shift(ACCESS_DESCRIPTION, (st))
-#define sk_ACCESS_DESCRIPTION_pop(st) SKM_sk_pop(ACCESS_DESCRIPTION, (st))
-#define sk_ACCESS_DESCRIPTION_sort(st) SKM_sk_sort(ACCESS_DESCRIPTION, (st))
-#define sk_ACCESS_DESCRIPTION_is_sorted(st) SKM_sk_is_sorted(ACCESS_DESCRIPTION, (st))
-
-#define sk_ASIdOrRange_new(st) SKM_sk_new(ASIdOrRange, (st))
-#define sk_ASIdOrRange_new_null() SKM_sk_new_null(ASIdOrRange)
-#define sk_ASIdOrRange_free(st) SKM_sk_free(ASIdOrRange, (st))
-#define sk_ASIdOrRange_num(st) SKM_sk_num(ASIdOrRange, (st))
-#define sk_ASIdOrRange_value(st, i) SKM_sk_value(ASIdOrRange, (st), (i))
-#define sk_ASIdOrRange_set(st, i, val) SKM_sk_set(ASIdOrRange, (st), (i), (val))
-#define sk_ASIdOrRange_zero(st) SKM_sk_zero(ASIdOrRange, (st))
-#define sk_ASIdOrRange_push(st, val) SKM_sk_push(ASIdOrRange, (st), (val))
-#define sk_ASIdOrRange_unshift(st, val) SKM_sk_unshift(ASIdOrRange, (st), (val))
-#define sk_ASIdOrRange_find(st, val) SKM_sk_find(ASIdOrRange, (st), (val))
-#define sk_ASIdOrRange_find_ex(st, val) SKM_sk_find_ex(ASIdOrRange, (st), (val))
-#define sk_ASIdOrRange_delete(st, i) SKM_sk_delete(ASIdOrRange, (st), (i))
-#define sk_ASIdOrRange_delete_ptr(st, ptr) SKM_sk_delete_ptr(ASIdOrRange, (st), (ptr))
-#define sk_ASIdOrRange_insert(st, val, i) SKM_sk_insert(ASIdOrRange, (st), (val), (i))
-#define sk_ASIdOrRange_set_cmp_func(st, cmp) SKM_sk_set_cmp_func(ASIdOrRange, (st), (cmp))
-#define sk_ASIdOrRange_dup(st) SKM_sk_dup(ASIdOrRange, st)
-#define sk_ASIdOrRange_pop_free(st, free_func) SKM_sk_pop_free(ASIdOrRange, (st), (free_func))
-#define sk_ASIdOrRange_shift(st) SKM_sk_shift(ASIdOrRange, (st))
-#define sk_ASIdOrRange_pop(st) SKM_sk_pop(ASIdOrRange, (st))
-#define sk_ASIdOrRange_sort(st) SKM_sk_sort(ASIdOrRange, (st))
-#define sk_ASIdOrRange_is_sorted(st) SKM_sk_is_sorted(ASIdOrRange, (st))
-
-#define sk_ASN1_GENERALSTRING_new(st) SKM_sk_new(ASN1_GENERALSTRING, (st))
-#define sk_ASN1_GENERALSTRING_new_null() SKM_sk_new_null(ASN1_GENERALSTRING)
-#define sk_ASN1_GENERALSTRING_free(st) SKM_sk_free(ASN1_GENERALSTRING, (st))
-#define sk_ASN1_GENERALSTRING_num(st) SKM_sk_num(ASN1_GENERALSTRING, (st))
-#define sk_ASN1_GENERALSTRING_value(st, i) SKM_sk_value(ASN1_GENERALSTRING, (st), (i))
-#define sk_ASN1_GENERALSTRING_set(st, i, val) SKM_sk_set(ASN1_GENERALSTRING, (st), (i), (val))
-#define sk_ASN1_GENERALSTRING_zero(st) SKM_sk_zero(ASN1_GENERALSTRING, (st))
-#define sk_ASN1_GENERALSTRING_push(st, val) SKM_sk_push(ASN1_GENERALSTRING, (st), (val))
-#define sk_ASN1_GENERALSTRING_unshift(st, val) SKM_sk_unshift(ASN1_GENERALSTRING, (st), (val))
-#define sk_ASN1_GENERALSTRING_find(st, val) SKM_sk_find(ASN1_GENERALSTRING, (st), (val))
-#define sk_ASN1_GENERALSTRING_find_ex(st, val) SKM_sk_find_ex(ASN1_GENERALSTRING, (st), (val))
-#define sk_ASN1_GENERALSTRING_delete(st, i) SKM_sk_delete(ASN1_GENERALSTRING, (st), (i))
-#define sk_ASN1_GENERALSTRING_delete_ptr(st, ptr) SKM_sk_delete_ptr(ASN1_GENERALSTRING, (st), (ptr))
-#define sk_ASN1_GENERALSTRING_insert(st, val, i) SKM_sk_insert(ASN1_GENERALSTRING, (st), (val), (i))
-#define sk_ASN1_GENERALSTRING_set_cmp_func(st, cmp) SKM_sk_set_cmp_func(ASN1_GENERALSTRING, (st), (cmp))
-#define sk_ASN1_GENERALSTRING_dup(st) SKM_sk_dup(ASN1_GENERALSTRING, st)
-#define sk_ASN1_GENERALSTRING_pop_free(st, free_func) SKM_sk_pop_free(ASN1_GENERALSTRING, (st), (free_func))
-#define sk_ASN1_GENERALSTRING_shift(st) SKM_sk_shift(ASN1_GENERALSTRING, (st))
-#define sk_ASN1_GENERALSTRING_pop(st) SKM_sk_pop(ASN1_GENERALSTRING, (st))
-#define sk_ASN1_GENERALSTRING_sort(st) SKM_sk_sort(ASN1_GENERALSTRING, (st))
-#define sk_ASN1_GENERALSTRING_is_sorted(st) SKM_sk_is_sorted(ASN1_GENERALSTRING, (st))
-
-#define sk_ASN1_INTEGER_new(st) SKM_sk_new(ASN1_INTEGER, (st))
-#define sk_ASN1_INTEGER_new_null() SKM_sk_new_null(ASN1_INTEGER)
-#define sk_ASN1_INTEGER_free(st) SKM_sk_free(ASN1_INTEGER, (st))
-#define sk_ASN1_INTEGER_num(st) SKM_sk_num(ASN1_INTEGER, (st))
-#define sk_ASN1_INTEGER_value(st, i) SKM_sk_value(ASN1_INTEGER, (st), (i))
-#define sk_ASN1_INTEGER_set(st, i, val) SKM_sk_set(ASN1_INTEGER, (st), (i), (val))
-#define sk_ASN1_INTEGER_zero(st) SKM_sk_zero(ASN1_INTEGER, (st))
-#define sk_ASN1_INTEGER_push(st, val) SKM_sk_push(ASN1_INTEGER, (st), (val))
-#define sk_ASN1_INTEGER_unshift(st, val) SKM_sk_unshift(ASN1_INTEGER, (st), (val))
-#define sk_ASN1_INTEGER_find(st, val) SKM_sk_find(ASN1_INTEGER, (st), (val))
-#define sk_ASN1_INTEGER_find_ex(st, val) SKM_sk_find_ex(ASN1_INTEGER, (st), (val))
-#define sk_ASN1_INTEGER_delete(st, i) SKM_sk_delete(ASN1_INTEGER, (st), (i))
-#define sk_ASN1_INTEGER_delete_ptr(st, ptr) SKM_sk_delete_ptr(ASN1_INTEGER, (st), (ptr))
-#define sk_ASN1_INTEGER_insert(st, val, i) SKM_sk_insert(ASN1_INTEGER, (st), (val), (i))
-#define sk_ASN1_INTEGER_set_cmp_func(st, cmp) SKM_sk_set_cmp_func(ASN1_INTEGER, (st), (cmp))
-#define sk_ASN1_INTEGER_dup(st) SKM_sk_dup(ASN1_INTEGER, st)
-#define sk_ASN1_INTEGER_pop_free(st, free_func) SKM_sk_pop_free(ASN1_INTEGER, (st), (free_func))
-#define sk_ASN1_INTEGER_shift(st) SKM_sk_shift(ASN1_INTEGER, (st))
-#define sk_ASN1_INTEGER_pop(st) SKM_sk_pop(ASN1_INTEGER, (st))
-#define sk_ASN1_INTEGER_sort(st) SKM_sk_sort(ASN1_INTEGER, (st))
-#define sk_ASN1_INTEGER_is_sorted(st) SKM_sk_is_sorted(ASN1_INTEGER, (st))
-
-#define sk_ASN1_OBJECT_new(st) SKM_sk_new(ASN1_OBJECT, (st))
-#define sk_ASN1_OBJECT_new_null() SKM_sk_new_null(ASN1_OBJECT)
-#define sk_ASN1_OBJECT_free(st) SKM_sk_free(ASN1_OBJECT, (st))
-#define sk_ASN1_OBJECT_num(st) SKM_sk_num(ASN1_OBJECT, (st))
-#define sk_ASN1_OBJECT_value(st, i) SKM_sk_value(ASN1_OBJECT, (st), (i))
-#define sk_ASN1_OBJECT_set(st, i, val) SKM_sk_set(ASN1_OBJECT, (st), (i), (val))
-#define sk_ASN1_OBJECT_zero(st) SKM_sk_zero(ASN1_OBJECT, (st))
-#define sk_ASN1_OBJECT_push(st, val) SKM_sk_push(ASN1_OBJECT, (st), (val))
-#define sk_ASN1_OBJECT_unshift(st, val) SKM_sk_unshift(ASN1_OBJECT, (st), (val))
-#define sk_ASN1_OBJECT_find(st, val) SKM_sk_find(ASN1_OBJECT, (st), (val))
-#define sk_ASN1_OBJECT_find_ex(st, val) SKM_sk_find_ex(ASN1_OBJECT, (st), (val))
-#define sk_ASN1_OBJECT_delete(st, i) SKM_sk_delete(ASN1_OBJECT, (st), (i))
-#define sk_ASN1_OBJECT_delete_ptr(st, ptr) SKM_sk_delete_ptr(ASN1_OBJECT, (st), (ptr))
-#define sk_ASN1_OBJECT_insert(st, val, i) SKM_sk_insert(ASN1_OBJECT, (st), (val), (i))
-#define sk_ASN1_OBJECT_set_cmp_func(st, cmp) SKM_sk_set_cmp_func(ASN1_OBJECT, (st), (cmp))
-#define sk_ASN1_OBJECT_dup(st) SKM_sk_dup(ASN1_OBJECT, st)
-#define sk_ASN1_OBJECT_pop_free(st, free_func) SKM_sk_pop_free(ASN1_OBJECT, (st), (free_func))
-#define sk_ASN1_OBJECT_shift(st) SKM_sk_shift(ASN1_OBJECT, (st))
-#define sk_ASN1_OBJECT_pop(st) SKM_sk_pop(ASN1_OBJECT, (st))
-#define sk_ASN1_OBJECT_sort(st) SKM_sk_sort(ASN1_OBJECT, (st))
-#define sk_ASN1_OBJECT_is_sorted(st) SKM_sk_is_sorted(ASN1_OBJECT, (st))
-
-#define sk_ASN1_STRING_TABLE_new(st) SKM_sk_new(ASN1_STRING_TABLE, (st))
-#define sk_ASN1_STRING_TABLE_new_null() SKM_sk_new_null(ASN1_STRING_TABLE)
-#define sk_ASN1_STRING_TABLE_free(st) SKM_sk_free(ASN1_STRING_TABLE, (st))
-#define sk_ASN1_STRING_TABLE_num(st) SKM_sk_num(ASN1_STRING_TABLE, (st))
-#define sk_ASN1_STRING_TABLE_value(st, i) SKM_sk_value(ASN1_STRING_TABLE, (st), (i))
-#define sk_ASN1_STRING_TABLE_set(st, i, val) SKM_sk_set(ASN1_STRING_TABLE, (st), (i), (val))
-#define sk_ASN1_STRING_TABLE_zero(st) SKM_sk_zero(ASN1_STRING_TABLE, (st))
-#define sk_ASN1_STRING_TABLE_push(st, val) SKM_sk_push(ASN1_STRING_TABLE, (st), (val))
-#define sk_ASN1_STRING_TABLE_unshift(st, val) SKM_sk_unshift(ASN1_STRING_TABLE, (st), (val))
-#define sk_ASN1_STRING_TABLE_find(st, val) SKM_sk_find(ASN1_STRING_TABLE, (st), (val))
-#define sk_ASN1_STRING_TABLE_find_ex(st, val) SKM_sk_find_ex(ASN1_STRING_TABLE, (st), (val))
-#define sk_ASN1_STRING_TABLE_delete(st, i) SKM_sk_delete(ASN1_STRING_TABLE, (st), (i))
-#define sk_ASN1_STRING_TABLE_delete_ptr(st, ptr) SKM_sk_delete_ptr(ASN1_STRING_TABLE, (st), (ptr))
-#define sk_ASN1_STRING_TABLE_insert(st, val, i) SKM_sk_insert(ASN1_STRING_TABLE, (st), (val), (i))
-#define sk_ASN1_STRING_TABLE_set_cmp_func(st, cmp) SKM_sk_set_cmp_func(ASN1_STRING_TABLE, (st), (cmp))
-#define sk_ASN1_STRING_TABLE_dup(st) SKM_sk_dup(ASN1_STRING_TABLE, st)
-#define sk_ASN1_STRING_TABLE_pop_free(st, free_func) SKM_sk_pop_free(ASN1_STRING_TABLE, (st), (free_func))
-#define sk_ASN1_STRING_TABLE_shift(st) SKM_sk_shift(ASN1_STRING_TABLE, (st))
-#define sk_ASN1_STRING_TABLE_pop(st) SKM_sk_pop(ASN1_STRING_TABLE, (st))
-#define sk_ASN1_STRING_TABLE_sort(st) SKM_sk_sort(ASN1_STRING_TABLE, (st))
-#define sk_ASN1_STRING_TABLE_is_sorted(st) SKM_sk_is_sorted(ASN1_STRING_TABLE, (st))
-
-#define sk_ASN1_TYPE_new(st) SKM_sk_new(ASN1_TYPE, (st))
-#define sk_ASN1_TYPE_new_null() SKM_sk_new_null(ASN1_TYPE)
-#define sk_ASN1_TYPE_free(st) SKM_sk_free(ASN1_TYPE, (st))
-#define sk_ASN1_TYPE_num(st) SKM_sk_num(ASN1_TYPE, (st))
-#define sk_ASN1_TYPE_value(st, i) SKM_sk_value(ASN1_TYPE, (st), (i))
-#define sk_ASN1_TYPE_set(st, i, val) SKM_sk_set(ASN1_TYPE, (st), (i), (val))
-#define sk_ASN1_TYPE_zero(st) SKM_sk_zero(ASN1_TYPE, (st))
-#define sk_ASN1_TYPE_push(st, val) SKM_sk_push(ASN1_TYPE, (st), (val))
-#define sk_ASN1_TYPE_unshift(st, val) SKM_sk_unshift(ASN1_TYPE, (st), (val))
-#define sk_ASN1_TYPE_find(st, val) SKM_sk_find(ASN1_TYPE, (st), (val))
-#define sk_ASN1_TYPE_find_ex(st, val) SKM_sk_find_ex(ASN1_TYPE, (st), (val))
-#define sk_ASN1_TYPE_delete(st, i) SKM_sk_delete(ASN1_TYPE, (st), (i))
-#define sk_ASN1_TYPE_delete_ptr(st, ptr) SKM_sk_delete_ptr(ASN1_TYPE, (st), (ptr))
-#define sk_ASN1_TYPE_insert(st, val, i) SKM_sk_insert(ASN1_TYPE, (st), (val), (i))
-#define sk_ASN1_TYPE_set_cmp_func(st, cmp) SKM_sk_set_cmp_func(ASN1_TYPE, (st), (cmp))
-#define sk_ASN1_TYPE_dup(st) SKM_sk_dup(ASN1_TYPE, st)
-#define sk_ASN1_TYPE_pop_free(st, free_func) SKM_sk_pop_free(ASN1_TYPE, (st), (free_func))
-#define sk_ASN1_TYPE_shift(st) SKM_sk_shift(ASN1_TYPE, (st))
-#define sk_ASN1_TYPE_pop(st) SKM_sk_pop(ASN1_TYPE, (st))
-#define sk_ASN1_TYPE_sort(st) SKM_sk_sort(ASN1_TYPE, (st))
-#define sk_ASN1_TYPE_is_sorted(st) SKM_sk_is_sorted(ASN1_TYPE, (st))
-
-#define sk_ASN1_VALUE_new(st) SKM_sk_new(ASN1_VALUE, (st))
-#define sk_ASN1_VALUE_new_null() SKM_sk_new_null(ASN1_VALUE)
-#define sk_ASN1_VALUE_free(st) SKM_sk_free(ASN1_VALUE, (st))
-#define sk_ASN1_VALUE_num(st) SKM_sk_num(ASN1_VALUE, (st))
-#define sk_ASN1_VALUE_value(st, i) SKM_sk_value(ASN1_VALUE, (st), (i))
-#define sk_ASN1_VALUE_set(st, i, val) SKM_sk_set(ASN1_VALUE, (st), (i), (val))
-#define sk_ASN1_VALUE_zero(st) SKM_sk_zero(ASN1_VALUE, (st))
-#define sk_ASN1_VALUE_push(st, val) SKM_sk_push(ASN1_VALUE, (st), (val))
-#define sk_ASN1_VALUE_unshift(st, val) SKM_sk_unshift(ASN1_VALUE, (st), (val))
-#define sk_ASN1_VALUE_find(st, val) SKM_sk_find(ASN1_VALUE, (st), (val))
-#define sk_ASN1_VALUE_find_ex(st, val) SKM_sk_find_ex(ASN1_VALUE, (st), (val))
-#define sk_ASN1_VALUE_delete(st, i) SKM_sk_delete(ASN1_VALUE, (st), (i))
-#define sk_ASN1_VALUE_delete_ptr(st, ptr) SKM_sk_delete_ptr(ASN1_VALUE, (st), (ptr))
-#define sk_ASN1_VALUE_insert(st, val, i) SKM_sk_insert(ASN1_VALUE, (st), (val), (i))
-#define sk_ASN1_VALUE_set_cmp_func(st, cmp) SKM_sk_set_cmp_func(ASN1_VALUE, (st), (cmp))
-#define sk_ASN1_VALUE_dup(st) SKM_sk_dup(ASN1_VALUE, st)
-#define sk_ASN1_VALUE_pop_free(st, free_func) SKM_sk_pop_free(ASN1_VALUE, (st), (free_func))
-#define sk_ASN1_VALUE_shift(st) SKM_sk_shift(ASN1_VALUE, (st))
-#define sk_ASN1_VALUE_pop(st) SKM_sk_pop(ASN1_VALUE, (st))
-#define sk_ASN1_VALUE_sort(st) SKM_sk_sort(ASN1_VALUE, (st))
-#define sk_ASN1_VALUE_is_sorted(st) SKM_sk_is_sorted(ASN1_VALUE, (st))
-
-#define sk_BIO_new(st) SKM_sk_new(BIO, (st))
-#define sk_BIO_new_null() SKM_sk_new_null(BIO)
-#define sk_BIO_free(st) SKM_sk_free(BIO, (st))
-#define sk_BIO_num(st) SKM_sk_num(BIO, (st))
-#define sk_BIO_value(st, i) SKM_sk_value(BIO, (st), (i))
-#define sk_BIO_set(st, i, val) SKM_sk_set(BIO, (st), (i), (val))
-#define sk_BIO_zero(st) SKM_sk_zero(BIO, (st))
-#define sk_BIO_push(st, val) SKM_sk_push(BIO, (st), (val))
-#define sk_BIO_unshift(st, val) SKM_sk_unshift(BIO, (st), (val))
-#define sk_BIO_find(st, val) SKM_sk_find(BIO, (st), (val))
-#define sk_BIO_find_ex(st, val) SKM_sk_find_ex(BIO, (st), (val))
-#define sk_BIO_delete(st, i) SKM_sk_delete(BIO, (st), (i))
-#define sk_BIO_delete_ptr(st, ptr) SKM_sk_delete_ptr(BIO, (st), (ptr))
-#define sk_BIO_insert(st, val, i) SKM_sk_insert(BIO, (st), (val), (i))
-#define sk_BIO_set_cmp_func(st, cmp) SKM_sk_set_cmp_func(BIO, (st), (cmp))
-#define sk_BIO_dup(st) SKM_sk_dup(BIO, st)
-#define sk_BIO_pop_free(st, free_func) SKM_sk_pop_free(BIO, (st), (free_func))
-#define sk_BIO_shift(st) SKM_sk_shift(BIO, (st))
-#define sk_BIO_pop(st) SKM_sk_pop(BIO, (st))
-#define sk_BIO_sort(st) SKM_sk_sort(BIO, (st))
-#define sk_BIO_is_sorted(st) SKM_sk_is_sorted(BIO, (st))
-
-#define sk_CONF_IMODULE_new(st) SKM_sk_new(CONF_IMODULE, (st))
-#define sk_CONF_IMODULE_new_null() SKM_sk_new_null(CONF_IMODULE)
-#define sk_CONF_IMODULE_free(st) SKM_sk_free(CONF_IMODULE, (st))
-#define sk_CONF_IMODULE_num(st) SKM_sk_num(CONF_IMODULE, (st))
-#define sk_CONF_IMODULE_value(st, i) SKM_sk_value(CONF_IMODULE, (st), (i))
-#define sk_CONF_IMODULE_set(st, i, val) SKM_sk_set(CONF_IMODULE, (st), (i), (val))
-#define sk_CONF_IMODULE_zero(st) SKM_sk_zero(CONF_IMODULE, (st))
-#define sk_CONF_IMODULE_push(st, val) SKM_sk_push(CONF_IMODULE, (st), (val))
-#define sk_CONF_IMODULE_unshift(st, val) SKM_sk_unshift(CONF_IMODULE, (st), (val))
-#define sk_CONF_IMODULE_find(st, val) SKM_sk_find(CONF_IMODULE, (st), (val))
-#define sk_CONF_IMODULE_find_ex(st, val) SKM_sk_find_ex(CONF_IMODULE, (st), (val))
-#define sk_CONF_IMODULE_delete(st, i) SKM_sk_delete(CONF_IMODULE, (st), (i))
-#define sk_CONF_IMODULE_delete_ptr(st, ptr) SKM_sk_delete_ptr(CONF_IMODULE, (st), (ptr))
-#define sk_CONF_IMODULE_insert(st, val, i) SKM_sk_insert(CONF_IMODULE, (st), (val), (i))
-#define sk_CONF_IMODULE_set_cmp_func(st, cmp) SKM_sk_set_cmp_func(CONF_IMODULE, (st), (cmp))
-#define sk_CONF_IMODULE_dup(st) SKM_sk_dup(CONF_IMODULE, st)
-#define sk_CONF_IMODULE_pop_free(st, free_func) SKM_sk_pop_free(CONF_IMODULE, (st), (free_func))
-#define sk_CONF_IMODULE_shift(st) SKM_sk_shift(CONF_IMODULE, (st))
-#define sk_CONF_IMODULE_pop(st) SKM_sk_pop(CONF_IMODULE, (st))
-#define sk_CONF_IMODULE_sort(st) SKM_sk_sort(CONF_IMODULE, (st))
-#define sk_CONF_IMODULE_is_sorted(st) SKM_sk_is_sorted(CONF_IMODULE, (st))
-
-#define sk_CONF_MODULE_new(st) SKM_sk_new(CONF_MODULE, (st))
-#define sk_CONF_MODULE_new_null() SKM_sk_new_null(CONF_MODULE)
-#define sk_CONF_MODULE_free(st) SKM_sk_free(CONF_MODULE, (st))
-#define sk_CONF_MODULE_num(st) SKM_sk_num(CONF_MODULE, (st))
-#define sk_CONF_MODULE_value(st, i) SKM_sk_value(CONF_MODULE, (st), (i))
-#define sk_CONF_MODULE_set(st, i, val) SKM_sk_set(CONF_MODULE, (st), (i), (val))
-#define sk_CONF_MODULE_zero(st) SKM_sk_zero(CONF_MODULE, (st))
-#define sk_CONF_MODULE_push(st, val) SKM_sk_push(CONF_MODULE, (st), (val))
-#define sk_CONF_MODULE_unshift(st, val) SKM_sk_unshift(CONF_MODULE, (st), (val))
-#define sk_CONF_MODULE_find(st, val) SKM_sk_find(CONF_MODULE, (st), (val))
-#define sk_CONF_MODULE_find_ex(st, val) SKM_sk_find_ex(CONF_MODULE, (st), (val))
-#define sk_CONF_MODULE_delete(st, i) SKM_sk_delete(CONF_MODULE, (st), (i))
-#define sk_CONF_MODULE_delete_ptr(st, ptr) SKM_sk_delete_ptr(CONF_MODULE, (st), (ptr))
-#define sk_CONF_MODULE_insert(st, val, i) SKM_sk_insert(CONF_MODULE, (st), (val), (i))
-#define sk_CONF_MODULE_set_cmp_func(st, cmp) SKM_sk_set_cmp_func(CONF_MODULE, (st), (cmp))
-#define sk_CONF_MODULE_dup(st) SKM_sk_dup(CONF_MODULE, st)
-#define sk_CONF_MODULE_pop_free(st, free_func) SKM_sk_pop_free(CONF_MODULE, (st), (free_func))
-#define sk_CONF_MODULE_shift(st) SKM_sk_shift(CONF_MODULE, (st))
-#define sk_CONF_MODULE_pop(st) SKM_sk_pop(CONF_MODULE, (st))
-#define sk_CONF_MODULE_sort(st) SKM_sk_sort(CONF_MODULE, (st))
-#define sk_CONF_MODULE_is_sorted(st) SKM_sk_is_sorted(CONF_MODULE, (st))
-
-#define sk_CONF_VALUE_new(st) SKM_sk_new(CONF_VALUE, (st))
-#define sk_CONF_VALUE_new_null() SKM_sk_new_null(CONF_VALUE)
-#define sk_CONF_VALUE_free(st) SKM_sk_free(CONF_VALUE, (st))
-#define sk_CONF_VALUE_num(st) SKM_sk_num(CONF_VALUE, (st))
-#define sk_CONF_VALUE_value(st, i) SKM_sk_value(CONF_VALUE, (st), (i))
-#define sk_CONF_VALUE_set(st, i, val) SKM_sk_set(CONF_VALUE, (st), (i), (val))
-#define sk_CONF_VALUE_zero(st) SKM_sk_zero(CONF_VALUE, (st))
-#define sk_CONF_VALUE_push(st, val) SKM_sk_push(CONF_VALUE, (st), (val))
-#define sk_CONF_VALUE_unshift(st, val) SKM_sk_unshift(CONF_VALUE, (st), (val))
-#define sk_CONF_VALUE_find(st, val) SKM_sk_find(CONF_VALUE, (st), (val))
-#define sk_CONF_VALUE_find_ex(st, val) SKM_sk_find_ex(CONF_VALUE, (st), (val))
-#define sk_CONF_VALUE_delete(st, i) SKM_sk_delete(CONF_VALUE, (st), (i))
-#define sk_CONF_VALUE_delete_ptr(st, ptr) SKM_sk_delete_ptr(CONF_VALUE, (st), (ptr))
-#define sk_CONF_VALUE_insert(st, val, i) SKM_sk_insert(CONF_VALUE, (st), (val), (i))
-#define sk_CONF_VALUE_set_cmp_func(st, cmp) SKM_sk_set_cmp_func(CONF_VALUE, (st), (cmp))
-#define sk_CONF_VALUE_dup(st) SKM_sk_dup(CONF_VALUE, st)
-#define sk_CONF_VALUE_pop_free(st, free_func) SKM_sk_pop_free(CONF_VALUE, (st), (free_func))
-#define sk_CONF_VALUE_shift(st) SKM_sk_shift(CONF_VALUE, (st))
-#define sk_CONF_VALUE_pop(st) SKM_sk_pop(CONF_VALUE, (st))
-#define sk_CONF_VALUE_sort(st) SKM_sk_sort(CONF_VALUE, (st))
-#define sk_CONF_VALUE_is_sorted(st) SKM_sk_is_sorted(CONF_VALUE, (st))
-
-#define sk_CRYPTO_EX_DATA_FUNCS_new(st) SKM_sk_new(CRYPTO_EX_DATA_FUNCS, (st))
-#define sk_CRYPTO_EX_DATA_FUNCS_new_null() SKM_sk_new_null(CRYPTO_EX_DATA_FUNCS)
-#define sk_CRYPTO_EX_DATA_FUNCS_free(st) SKM_sk_free(CRYPTO_EX_DATA_FUNCS, (st))
-#define sk_CRYPTO_EX_DATA_FUNCS_num(st) SKM_sk_num(CRYPTO_EX_DATA_FUNCS, (st))
-#define sk_CRYPTO_EX_DATA_FUNCS_value(st, i) SKM_sk_value(CRYPTO_EX_DATA_FUNCS, (st), (i))
-#define sk_CRYPTO_EX_DATA_FUNCS_set(st, i, val) SKM_sk_set(CRYPTO_EX_DATA_FUNCS, (st), (i), (val))
-#define sk_CRYPTO_EX_DATA_FUNCS_zero(st) SKM_sk_zero(CRYPTO_EX_DATA_FUNCS, (st))
-#define sk_CRYPTO_EX_DATA_FUNCS_push(st, val) SKM_sk_push(CRYPTO_EX_DATA_FUNCS, (st), (val))
-#define sk_CRYPTO_EX_DATA_FUNCS_unshift(st, val) SKM_sk_unshift(CRYPTO_EX_DATA_FUNCS, (st), (val))
-#define sk_CRYPTO_EX_DATA_FUNCS_find(st, val) SKM_sk_find(CRYPTO_EX_DATA_FUNCS, (st), (val))
-#define sk_CRYPTO_EX_DATA_FUNCS_find_ex(st, val) SKM_sk_find_ex(CRYPTO_EX_DATA_FUNCS, (st), (val))
-#define sk_CRYPTO_EX_DATA_FUNCS_delete(st, i) SKM_sk_delete(CRYPTO_EX_DATA_FUNCS, (st), (i))
-#define sk_CRYPTO_EX_DATA_FUNCS_delete_ptr(st, ptr) SKM_sk_delete_ptr(CRYPTO_EX_DATA_FUNCS, (st), (ptr))
-#define sk_CRYPTO_EX_DATA_FUNCS_insert(st, val, i) SKM_sk_insert(CRYPTO_EX_DATA_FUNCS, (st), (val), (i))
-#define sk_CRYPTO_EX_DATA_FUNCS_set_cmp_func(st, cmp) SKM_sk_set_cmp_func(CRYPTO_EX_DATA_FUNCS, (st), (cmp))
-#define sk_CRYPTO_EX_DATA_FUNCS_dup(st) SKM_sk_dup(CRYPTO_EX_DATA_FUNCS, st)
-#define sk_CRYPTO_EX_DATA_FUNCS_pop_free(st, free_func) SKM_sk_pop_free(CRYPTO_EX_DATA_FUNCS, (st), (free_func))
-#define sk_CRYPTO_EX_DATA_FUNCS_shift(st) SKM_sk_shift(CRYPTO_EX_DATA_FUNCS, (st))
-#define sk_CRYPTO_EX_DATA_FUNCS_pop(st) SKM_sk_pop(CRYPTO_EX_DATA_FUNCS, (st))
-#define sk_CRYPTO_EX_DATA_FUNCS_sort(st) SKM_sk_sort(CRYPTO_EX_DATA_FUNCS, (st))
-#define sk_CRYPTO_EX_DATA_FUNCS_is_sorted(st) SKM_sk_is_sorted(CRYPTO_EX_DATA_FUNCS, (st))
-
-#define sk_CRYPTO_dynlock_new(st) SKM_sk_new(CRYPTO_dynlock, (st))
-#define sk_CRYPTO_dynlock_new_null() SKM_sk_new_null(CRYPTO_dynlock)
-#define sk_CRYPTO_dynlock_free(st) SKM_sk_free(CRYPTO_dynlock, (st))
-#define sk_CRYPTO_dynlock_num(st) SKM_sk_num(CRYPTO_dynlock, (st))
-#define sk_CRYPTO_dynlock_value(st, i) SKM_sk_value(CRYPTO_dynlock, (st), (i))
-#define sk_CRYPTO_dynlock_set(st, i, val) SKM_sk_set(CRYPTO_dynlock, (st), (i), (val))
-#define sk_CRYPTO_dynlock_zero(st) SKM_sk_zero(CRYPTO_dynlock, (st))
-#define sk_CRYPTO_dynlock_push(st, val) SKM_sk_push(CRYPTO_dynlock, (st), (val))
-#define sk_CRYPTO_dynlock_unshift(st, val) SKM_sk_unshift(CRYPTO_dynlock, (st), (val))
-#define sk_CRYPTO_dynlock_find(st, val) SKM_sk_find(CRYPTO_dynlock, (st), (val))
-#define sk_CRYPTO_dynlock_find_ex(st, val) SKM_sk_find_ex(CRYPTO_dynlock, (st), (val))
-#define sk_CRYPTO_dynlock_delete(st, i) SKM_sk_delete(CRYPTO_dynlock, (st), (i))
-#define sk_CRYPTO_dynlock_delete_ptr(st, ptr) SKM_sk_delete_ptr(CRYPTO_dynlock, (st), (ptr))
-#define sk_CRYPTO_dynlock_insert(st, val, i) SKM_sk_insert(CRYPTO_dynlock, (st), (val), (i))
-#define sk_CRYPTO_dynlock_set_cmp_func(st, cmp) SKM_sk_set_cmp_func(CRYPTO_dynlock, (st), (cmp))
-#define sk_CRYPTO_dynlock_dup(st) SKM_sk_dup(CRYPTO_dynlock, st)
-#define sk_CRYPTO_dynlock_pop_free(st, free_func) SKM_sk_pop_free(CRYPTO_dynlock, (st), (free_func))
-#define sk_CRYPTO_dynlock_shift(st) SKM_sk_shift(CRYPTO_dynlock, (st))
-#define sk_CRYPTO_dynlock_pop(st) SKM_sk_pop(CRYPTO_dynlock, (st))
-#define sk_CRYPTO_dynlock_sort(st) SKM_sk_sort(CRYPTO_dynlock, (st))
-#define sk_CRYPTO_dynlock_is_sorted(st) SKM_sk_is_sorted(CRYPTO_dynlock, (st))
-
-#define sk_DIST_POINT_new(st) SKM_sk_new(DIST_POINT, (st))
-#define sk_DIST_POINT_new_null() SKM_sk_new_null(DIST_POINT)
-#define sk_DIST_POINT_free(st) SKM_sk_free(DIST_POINT, (st))
-#define sk_DIST_POINT_num(st) SKM_sk_num(DIST_POINT, (st))
-#define sk_DIST_POINT_value(st, i) SKM_sk_value(DIST_POINT, (st), (i))
-#define sk_DIST_POINT_set(st, i, val) SKM_sk_set(DIST_POINT, (st), (i), (val))
-#define sk_DIST_POINT_zero(st) SKM_sk_zero(DIST_POINT, (st))
-#define sk_DIST_POINT_push(st, val) SKM_sk_push(DIST_POINT, (st), (val))
-#define sk_DIST_POINT_unshift(st, val) SKM_sk_unshift(DIST_POINT, (st), (val))
-#define sk_DIST_POINT_find(st, val) SKM_sk_find(DIST_POINT, (st), (val))
-#define sk_DIST_POINT_find_ex(st, val) SKM_sk_find_ex(DIST_POINT, (st), (val))
-#define sk_DIST_POINT_delete(st, i) SKM_sk_delete(DIST_POINT, (st), (i))
-#define sk_DIST_POINT_delete_ptr(st, ptr) SKM_sk_delete_ptr(DIST_POINT, (st), (ptr))
-#define sk_DIST_POINT_insert(st, val, i) SKM_sk_insert(DIST_POINT, (st), (val), (i))
-#define sk_DIST_POINT_set_cmp_func(st, cmp) SKM_sk_set_cmp_func(DIST_POINT, (st), (cmp))
-#define sk_DIST_POINT_dup(st) SKM_sk_dup(DIST_POINT, st)
-#define sk_DIST_POINT_pop_free(st, free_func) SKM_sk_pop_free(DIST_POINT, (st), (free_func))
-#define sk_DIST_POINT_shift(st) SKM_sk_shift(DIST_POINT, (st))
-#define sk_DIST_POINT_pop(st) SKM_sk_pop(DIST_POINT, (st))
-#define sk_DIST_POINT_sort(st) SKM_sk_sort(DIST_POINT, (st))
-#define sk_DIST_POINT_is_sorted(st) SKM_sk_is_sorted(DIST_POINT, (st))
-
-#define sk_ENGINE_new(st) SKM_sk_new(ENGINE, (st))
-#define sk_ENGINE_new_null() SKM_sk_new_null(ENGINE)
-#define sk_ENGINE_free(st) SKM_sk_free(ENGINE, (st))
-#define sk_ENGINE_num(st) SKM_sk_num(ENGINE, (st))
-#define sk_ENGINE_value(st, i) SKM_sk_value(ENGINE, (st), (i))
-#define sk_ENGINE_set(st, i, val) SKM_sk_set(ENGINE, (st), (i), (val))
-#define sk_ENGINE_zero(st) SKM_sk_zero(ENGINE, (st))
-#define sk_ENGINE_push(st, val) SKM_sk_push(ENGINE, (st), (val))
-#define sk_ENGINE_unshift(st, val) SKM_sk_unshift(ENGINE, (st), (val))
-#define sk_ENGINE_find(st, val) SKM_sk_find(ENGINE, (st), (val))
-#define sk_ENGINE_find_ex(st, val) SKM_sk_find_ex(ENGINE, (st), (val))
-#define sk_ENGINE_delete(st, i) SKM_sk_delete(ENGINE, (st), (i))
-#define sk_ENGINE_delete_ptr(st, ptr) SKM_sk_delete_ptr(ENGINE, (st), (ptr))
-#define sk_ENGINE_insert(st, val, i) SKM_sk_insert(ENGINE, (st), (val), (i))
-#define sk_ENGINE_set_cmp_func(st, cmp) SKM_sk_set_cmp_func(ENGINE, (st), (cmp))
-#define sk_ENGINE_dup(st) SKM_sk_dup(ENGINE, st)
-#define sk_ENGINE_pop_free(st, free_func) SKM_sk_pop_free(ENGINE, (st), (free_func))
-#define sk_ENGINE_shift(st) SKM_sk_shift(ENGINE, (st))
-#define sk_ENGINE_pop(st) SKM_sk_pop(ENGINE, (st))
-#define sk_ENGINE_sort(st) SKM_sk_sort(ENGINE, (st))
-#define sk_ENGINE_is_sorted(st) SKM_sk_is_sorted(ENGINE, (st))
-
-#define sk_ENGINE_CLEANUP_ITEM_new(st) SKM_sk_new(ENGINE_CLEANUP_ITEM, (st))
-#define sk_ENGINE_CLEANUP_ITEM_new_null() SKM_sk_new_null(ENGINE_CLEANUP_ITEM)
-#define sk_ENGINE_CLEANUP_ITEM_free(st) SKM_sk_free(ENGINE_CLEANUP_ITEM, (st))
-#define sk_ENGINE_CLEANUP_ITEM_num(st) SKM_sk_num(ENGINE_CLEANUP_ITEM, (st))
-#define sk_ENGINE_CLEANUP_ITEM_value(st, i) SKM_sk_value(ENGINE_CLEANUP_ITEM, (st), (i))
-#define sk_ENGINE_CLEANUP_ITEM_set(st, i, val) SKM_sk_set(ENGINE_CLEANUP_ITEM, (st), (i), (val))
-#define sk_ENGINE_CLEANUP_ITEM_zero(st) SKM_sk_zero(ENGINE_CLEANUP_ITEM, (st))
-#define sk_ENGINE_CLEANUP_ITEM_push(st, val) SKM_sk_push(ENGINE_CLEANUP_ITEM, (st), (val))
-#define sk_ENGINE_CLEANUP_ITEM_unshift(st, val) SKM_sk_unshift(ENGINE_CLEANUP_ITEM, (st), (val))
-#define sk_ENGINE_CLEANUP_ITEM_find(st, val) SKM_sk_find(ENGINE_CLEANUP_ITEM, (st), (val))
-#define sk_ENGINE_CLEANUP_ITEM_find_ex(st, val) SKM_sk_find_ex(ENGINE_CLEANUP_ITEM, (st), (val))
-#define sk_ENGINE_CLEANUP_ITEM_delete(st, i) SKM_sk_delete(ENGINE_CLEANUP_ITEM, (st), (i))
-#define sk_ENGINE_CLEANUP_ITEM_delete_ptr(st, ptr) SKM_sk_delete_ptr(ENGINE_CLEANUP_ITEM, (st), (ptr))
-#define sk_ENGINE_CLEANUP_ITEM_insert(st, val, i) SKM_sk_insert(ENGINE_CLEANUP_ITEM, (st), (val), (i))
-#define sk_ENGINE_CLEANUP_ITEM_set_cmp_func(st, cmp) SKM_sk_set_cmp_func(ENGINE_CLEANUP_ITEM, (st), (cmp))
-#define sk_ENGINE_CLEANUP_ITEM_dup(st) SKM_sk_dup(ENGINE_CLEANUP_ITEM, st)
-#define sk_ENGINE_CLEANUP_ITEM_pop_free(st, free_func) SKM_sk_pop_free(ENGINE_CLEANUP_ITEM, (st), (free_func))
-#define sk_ENGINE_CLEANUP_ITEM_shift(st) SKM_sk_shift(ENGINE_CLEANUP_ITEM, (st))
-#define sk_ENGINE_CLEANUP_ITEM_pop(st) SKM_sk_pop(ENGINE_CLEANUP_ITEM, (st))
-#define sk_ENGINE_CLEANUP_ITEM_sort(st) SKM_sk_sort(ENGINE_CLEANUP_ITEM, (st))
-#define sk_ENGINE_CLEANUP_ITEM_is_sorted(st) SKM_sk_is_sorted(ENGINE_CLEANUP_ITEM, (st))
-
-#define sk_GENERAL_NAME_new(st) SKM_sk_new(GENERAL_NAME, (st))
-#define sk_GENERAL_NAME_new_null() SKM_sk_new_null(GENERAL_NAME)
-#define sk_GENERAL_NAME_free(st) SKM_sk_free(GENERAL_NAME, (st))
-#define sk_GENERAL_NAME_num(st) SKM_sk_num(GENERAL_NAME, (st))
-#define sk_GENERAL_NAME_value(st, i) SKM_sk_value(GENERAL_NAME, (st), (i))
-#define sk_GENERAL_NAME_set(st, i, val) SKM_sk_set(GENERAL_NAME, (st), (i), (val))
-#define sk_GENERAL_NAME_zero(st) SKM_sk_zero(GENERAL_NAME, (st))
-#define sk_GENERAL_NAME_push(st, val) SKM_sk_push(GENERAL_NAME, (st), (val))
-#define sk_GENERAL_NAME_unshift(st, val) SKM_sk_unshift(GENERAL_NAME, (st), (val))
-#define sk_GENERAL_NAME_find(st, val) SKM_sk_find(GENERAL_NAME, (st), (val))
-#define sk_GENERAL_NAME_find_ex(st, val) SKM_sk_find_ex(GENERAL_NAME, (st), (val))
-#define sk_GENERAL_NAME_delete(st, i) SKM_sk_delete(GENERAL_NAME, (st), (i))
-#define sk_GENERAL_NAME_delete_ptr(st, ptr) SKM_sk_delete_ptr(GENERAL_NAME, (st), (ptr))
-#define sk_GENERAL_NAME_insert(st, val, i) SKM_sk_insert(GENERAL_NAME, (st), (val), (i))
-#define sk_GENERAL_NAME_set_cmp_func(st, cmp) SKM_sk_set_cmp_func(GENERAL_NAME, (st), (cmp))
-#define sk_GENERAL_NAME_dup(st) SKM_sk_dup(GENERAL_NAME, st)
-#define sk_GENERAL_NAME_pop_free(st, free_func) SKM_sk_pop_free(GENERAL_NAME, (st), (free_func))
-#define sk_GENERAL_NAME_shift(st) SKM_sk_shift(GENERAL_NAME, (st))
-#define sk_GENERAL_NAME_pop(st) SKM_sk_pop(GENERAL_NAME, (st))
-#define sk_GENERAL_NAME_sort(st) SKM_sk_sort(GENERAL_NAME, (st))
-#define sk_GENERAL_NAME_is_sorted(st) SKM_sk_is_sorted(GENERAL_NAME, (st))
-
-#define sk_GENERAL_SUBTREE_new(st) SKM_sk_new(GENERAL_SUBTREE, (st))
-#define sk_GENERAL_SUBTREE_new_null() SKM_sk_new_null(GENERAL_SUBTREE)
-#define sk_GENERAL_SUBTREE_free(st) SKM_sk_free(GENERAL_SUBTREE, (st))
-#define sk_GENERAL_SUBTREE_num(st) SKM_sk_num(GENERAL_SUBTREE, (st))
-#define sk_GENERAL_SUBTREE_value(st, i) SKM_sk_value(GENERAL_SUBTREE, (st), (i))
-#define sk_GENERAL_SUBTREE_set(st, i, val) SKM_sk_set(GENERAL_SUBTREE, (st), (i), (val))
-#define sk_GENERAL_SUBTREE_zero(st) SKM_sk_zero(GENERAL_SUBTREE, (st))
-#define sk_GENERAL_SUBTREE_push(st, val) SKM_sk_push(GENERAL_SUBTREE, (st), (val))
-#define sk_GENERAL_SUBTREE_unshift(st, val) SKM_sk_unshift(GENERAL_SUBTREE, (st), (val))
-#define sk_GENERAL_SUBTREE_find(st, val) SKM_sk_find(GENERAL_SUBTREE, (st), (val))
-#define sk_GENERAL_SUBTREE_find_ex(st, val) SKM_sk_find_ex(GENERAL_SUBTREE, (st), (val))
-#define sk_GENERAL_SUBTREE_delete(st, i) SKM_sk_delete(GENERAL_SUBTREE, (st), (i))
-#define sk_GENERAL_SUBTREE_delete_ptr(st, ptr) SKM_sk_delete_ptr(GENERAL_SUBTREE, (st), (ptr))
-#define sk_GENERAL_SUBTREE_insert(st, val, i) SKM_sk_insert(GENERAL_SUBTREE, (st), (val), (i))
-#define sk_GENERAL_SUBTREE_set_cmp_func(st, cmp) SKM_sk_set_cmp_func(GENERAL_SUBTREE, (st), (cmp))
-#define sk_GENERAL_SUBTREE_dup(st) SKM_sk_dup(GENERAL_SUBTREE, st)
-#define sk_GENERAL_SUBTREE_pop_free(st, free_func) SKM_sk_pop_free(GENERAL_SUBTREE, (st), (free_func))
-#define sk_GENERAL_SUBTREE_shift(st) SKM_sk_shift(GENERAL_SUBTREE, (st))
-#define sk_GENERAL_SUBTREE_pop(st) SKM_sk_pop(GENERAL_SUBTREE, (st))
-#define sk_GENERAL_SUBTREE_sort(st) SKM_sk_sort(GENERAL_SUBTREE, (st))
-#define sk_GENERAL_SUBTREE_is_sorted(st) SKM_sk_is_sorted(GENERAL_SUBTREE, (st))
-
-#define sk_IPAddressFamily_new(st) SKM_sk_new(IPAddressFamily, (st))
-#define sk_IPAddressFamily_new_null() SKM_sk_new_null(IPAddressFamily)
-#define sk_IPAddressFamily_free(st) SKM_sk_free(IPAddressFamily, (st))
-#define sk_IPAddressFamily_num(st) SKM_sk_num(IPAddressFamily, (st))
-#define sk_IPAddressFamily_value(st, i) SKM_sk_value(IPAddressFamily, (st), (i))
-#define sk_IPAddressFamily_set(st, i, val) SKM_sk_set(IPAddressFamily, (st), (i), (val))
-#define sk_IPAddressFamily_zero(st) SKM_sk_zero(IPAddressFamily, (st))
-#define sk_IPAddressFamily_push(st, val) SKM_sk_push(IPAddressFamily, (st), (val))
-#define sk_IPAddressFamily_unshift(st, val) SKM_sk_unshift(IPAddressFamily, (st), (val))
-#define sk_IPAddressFamily_find(st, val) SKM_sk_find(IPAddressFamily, (st), (val))
-#define sk_IPAddressFamily_find_ex(st, val) SKM_sk_find_ex(IPAddressFamily, (st), (val))
-#define sk_IPAddressFamily_delete(st, i) SKM_sk_delete(IPAddressFamily, (st), (i))
-#define sk_IPAddressFamily_delete_ptr(st, ptr) SKM_sk_delete_ptr(IPAddressFamily, (st), (ptr))
-#define sk_IPAddressFamily_insert(st, val, i) SKM_sk_insert(IPAddressFamily, (st), (val), (i))
-#define sk_IPAddressFamily_set_cmp_func(st, cmp) SKM_sk_set_cmp_func(IPAddressFamily, (st), (cmp))
-#define sk_IPAddressFamily_dup(st) SKM_sk_dup(IPAddressFamily, st)
-#define sk_IPAddressFamily_pop_free(st, free_func) SKM_sk_pop_free(IPAddressFamily, (st), (free_func))
-#define sk_IPAddressFamily_shift(st) SKM_sk_shift(IPAddressFamily, (st))
-#define sk_IPAddressFamily_pop(st) SKM_sk_pop(IPAddressFamily, (st))
-#define sk_IPAddressFamily_sort(st) SKM_sk_sort(IPAddressFamily, (st))
-#define sk_IPAddressFamily_is_sorted(st) SKM_sk_is_sorted(IPAddressFamily, (st))
-
-#define sk_IPAddressOrRange_new(st) SKM_sk_new(IPAddressOrRange, (st))
-#define sk_IPAddressOrRange_new_null() SKM_sk_new_null(IPAddressOrRange)
-#define sk_IPAddressOrRange_free(st) SKM_sk_free(IPAddressOrRange, (st))
-#define sk_IPAddressOrRange_num(st) SKM_sk_num(IPAddressOrRange, (st))
-#define sk_IPAddressOrRange_value(st, i) SKM_sk_value(IPAddressOrRange, (st), (i))
-#define sk_IPAddressOrRange_set(st, i, val) SKM_sk_set(IPAddressOrRange, (st), (i), (val))
-#define sk_IPAddressOrRange_zero(st) SKM_sk_zero(IPAddressOrRange, (st))
-#define sk_IPAddressOrRange_push(st, val) SKM_sk_push(IPAddressOrRange, (st), (val))
-#define sk_IPAddressOrRange_unshift(st, val) SKM_sk_unshift(IPAddressOrRange, (st), (val))
-#define sk_IPAddressOrRange_find(st, val) SKM_sk_find(IPAddressOrRange, (st), (val))
-#define sk_IPAddressOrRange_find_ex(st, val) SKM_sk_find_ex(IPAddressOrRange, (st), (val))
-#define sk_IPAddressOrRange_delete(st, i) SKM_sk_delete(IPAddressOrRange, (st), (i))
-#define sk_IPAddressOrRange_delete_ptr(st, ptr) SKM_sk_delete_ptr(IPAddressOrRange, (st), (ptr))
-#define sk_IPAddressOrRange_insert(st, val, i) SKM_sk_insert(IPAddressOrRange, (st), (val), (i))
-#define sk_IPAddressOrRange_set_cmp_func(st, cmp) SKM_sk_set_cmp_func(IPAddressOrRange, (st), (cmp))
-#define sk_IPAddressOrRange_dup(st) SKM_sk_dup(IPAddressOrRange, st)
-#define sk_IPAddressOrRange_pop_free(st, free_func) SKM_sk_pop_free(IPAddressOrRange, (st), (free_func))
-#define sk_IPAddressOrRange_shift(st) SKM_sk_shift(IPAddressOrRange, (st))
-#define sk_IPAddressOrRange_pop(st) SKM_sk_pop(IPAddressOrRange, (st))
-#define sk_IPAddressOrRange_sort(st) SKM_sk_sort(IPAddressOrRange, (st))
-#define sk_IPAddressOrRange_is_sorted(st) SKM_sk_is_sorted(IPAddressOrRange, (st))
-
-#define sk_KRB5_APREQBODY_new(st) SKM_sk_new(KRB5_APREQBODY, (st))
-#define sk_KRB5_APREQBODY_new_null() SKM_sk_new_null(KRB5_APREQBODY)
-#define sk_KRB5_APREQBODY_free(st) SKM_sk_free(KRB5_APREQBODY, (st))
-#define sk_KRB5_APREQBODY_num(st) SKM_sk_num(KRB5_APREQBODY, (st))
-#define sk_KRB5_APREQBODY_value(st, i) SKM_sk_value(KRB5_APREQBODY, (st), (i))
-#define sk_KRB5_APREQBODY_set(st, i, val) SKM_sk_set(KRB5_APREQBODY, (st), (i), (val))
-#define sk_KRB5_APREQBODY_zero(st) SKM_sk_zero(KRB5_APREQBODY, (st))
-#define sk_KRB5_APREQBODY_push(st, val) SKM_sk_push(KRB5_APREQBODY, (st), (val))
-#define sk_KRB5_APREQBODY_unshift(st, val) SKM_sk_unshift(KRB5_APREQBODY, (st), (val))
-#define sk_KRB5_APREQBODY_find(st, val) SKM_sk_find(KRB5_APREQBODY, (st), (val))
-#define sk_KRB5_APREQBODY_find_ex(st, val) SKM_sk_find_ex(KRB5_APREQBODY, (st), (val))
-#define sk_KRB5_APREQBODY_delete(st, i) SKM_sk_delete(KRB5_APREQBODY, (st), (i))
-#define sk_KRB5_APREQBODY_delete_ptr(st, ptr) SKM_sk_delete_ptr(KRB5_APREQBODY, (st), (ptr))
-#define sk_KRB5_APREQBODY_insert(st, val, i) SKM_sk_insert(KRB5_APREQBODY, (st), (val), (i))
-#define sk_KRB5_APREQBODY_set_cmp_func(st, cmp) SKM_sk_set_cmp_func(KRB5_APREQBODY, (st), (cmp))
-#define sk_KRB5_APREQBODY_dup(st) SKM_sk_dup(KRB5_APREQBODY, st)
-#define sk_KRB5_APREQBODY_pop_free(st, free_func) SKM_sk_pop_free(KRB5_APREQBODY, (st), (free_func))
-#define sk_KRB5_APREQBODY_shift(st) SKM_sk_shift(KRB5_APREQBODY, (st))
-#define sk_KRB5_APREQBODY_pop(st) SKM_sk_pop(KRB5_APREQBODY, (st))
-#define sk_KRB5_APREQBODY_sort(st) SKM_sk_sort(KRB5_APREQBODY, (st))
-#define sk_KRB5_APREQBODY_is_sorted(st) SKM_sk_is_sorted(KRB5_APREQBODY, (st))
-
-#define sk_KRB5_AUTHDATA_new(st) SKM_sk_new(KRB5_AUTHDATA, (st))
-#define sk_KRB5_AUTHDATA_new_null() SKM_sk_new_null(KRB5_AUTHDATA)
-#define sk_KRB5_AUTHDATA_free(st) SKM_sk_free(KRB5_AUTHDATA, (st))
-#define sk_KRB5_AUTHDATA_num(st) SKM_sk_num(KRB5_AUTHDATA, (st))
-#define sk_KRB5_AUTHDATA_value(st, i) SKM_sk_value(KRB5_AUTHDATA, (st), (i))
-#define sk_KRB5_AUTHDATA_set(st, i, val) SKM_sk_set(KRB5_AUTHDATA, (st), (i), (val))
-#define sk_KRB5_AUTHDATA_zero(st) SKM_sk_zero(KRB5_AUTHDATA, (st))
-#define sk_KRB5_AUTHDATA_push(st, val) SKM_sk_push(KRB5_AUTHDATA, (st), (val))
-#define sk_KRB5_AUTHDATA_unshift(st, val) SKM_sk_unshift(KRB5_AUTHDATA, (st), (val))
-#define sk_KRB5_AUTHDATA_find(st, val) SKM_sk_find(KRB5_AUTHDATA, (st), (val))
-#define sk_KRB5_AUTHDATA_find_ex(st, val) SKM_sk_find_ex(KRB5_AUTHDATA, (st), (val))
-#define sk_KRB5_AUTHDATA_delete(st, i) SKM_sk_delete(KRB5_AUTHDATA, (st), (i))
-#define sk_KRB5_AUTHDATA_delete_ptr(st, ptr) SKM_sk_delete_ptr(KRB5_AUTHDATA, (st), (ptr))
-#define sk_KRB5_AUTHDATA_insert(st, val, i) SKM_sk_insert(KRB5_AUTHDATA, (st), (val), (i))
-#define sk_KRB5_AUTHDATA_set_cmp_func(st, cmp) SKM_sk_set_cmp_func(KRB5_AUTHDATA, (st), (cmp))
-#define sk_KRB5_AUTHDATA_dup(st) SKM_sk_dup(KRB5_AUTHDATA, st)
-#define sk_KRB5_AUTHDATA_pop_free(st, free_func) SKM_sk_pop_free(KRB5_AUTHDATA, (st), (free_func))
-#define sk_KRB5_AUTHDATA_shift(st) SKM_sk_shift(KRB5_AUTHDATA, (st))
-#define sk_KRB5_AUTHDATA_pop(st) SKM_sk_pop(KRB5_AUTHDATA, (st))
-#define sk_KRB5_AUTHDATA_sort(st) SKM_sk_sort(KRB5_AUTHDATA, (st))
-#define sk_KRB5_AUTHDATA_is_sorted(st) SKM_sk_is_sorted(KRB5_AUTHDATA, (st))
-
-#define sk_KRB5_AUTHENTBODY_new(st) SKM_sk_new(KRB5_AUTHENTBODY, (st))
-#define sk_KRB5_AUTHENTBODY_new_null() SKM_sk_new_null(KRB5_AUTHENTBODY)
-#define sk_KRB5_AUTHENTBODY_free(st) SKM_sk_free(KRB5_AUTHENTBODY, (st))
-#define sk_KRB5_AUTHENTBODY_num(st) SKM_sk_num(KRB5_AUTHENTBODY, (st))
-#define sk_KRB5_AUTHENTBODY_value(st, i) SKM_sk_value(KRB5_AUTHENTBODY, (st), (i))
-#define sk_KRB5_AUTHENTBODY_set(st, i, val) SKM_sk_set(KRB5_AUTHENTBODY, (st), (i), (val))
-#define sk_KRB5_AUTHENTBODY_zero(st) SKM_sk_zero(KRB5_AUTHENTBODY, (st))
-#define sk_KRB5_AUTHENTBODY_push(st, val) SKM_sk_push(KRB5_AUTHENTBODY, (st), (val))
-#define sk_KRB5_AUTHENTBODY_unshift(st, val) SKM_sk_unshift(KRB5_AUTHENTBODY, (st), (val))
-#define sk_KRB5_AUTHENTBODY_find(st, val) SKM_sk_find(KRB5_AUTHENTBODY, (st), (val))
-#define sk_KRB5_AUTHENTBODY_find_ex(st, val) SKM_sk_find_ex(KRB5_AUTHENTBODY, (st), (val))
-#define sk_KRB5_AUTHENTBODY_delete(st, i) SKM_sk_delete(KRB5_AUTHENTBODY, (st), (i))
-#define sk_KRB5_AUTHENTBODY_delete_ptr(st, ptr) SKM_sk_delete_ptr(KRB5_AUTHENTBODY, (st), (ptr))
-#define sk_KRB5_AUTHENTBODY_insert(st, val, i) SKM_sk_insert(KRB5_AUTHENTBODY, (st), (val), (i))
-#define sk_KRB5_AUTHENTBODY_set_cmp_func(st, cmp) SKM_sk_set_cmp_func(KRB5_AUTHENTBODY, (st), (cmp))
-#define sk_KRB5_AUTHENTBODY_dup(st) SKM_sk_dup(KRB5_AUTHENTBODY, st)
-#define sk_KRB5_AUTHENTBODY_pop_free(st, free_func) SKM_sk_pop_free(KRB5_AUTHENTBODY, (st), (free_func))
-#define sk_KRB5_AUTHENTBODY_shift(st) SKM_sk_shift(KRB5_AUTHENTBODY, (st))
-#define sk_KRB5_AUTHENTBODY_pop(st) SKM_sk_pop(KRB5_AUTHENTBODY, (st))
-#define sk_KRB5_AUTHENTBODY_sort(st) SKM_sk_sort(KRB5_AUTHENTBODY, (st))
-#define sk_KRB5_AUTHENTBODY_is_sorted(st) SKM_sk_is_sorted(KRB5_AUTHENTBODY, (st))
-
-#define sk_KRB5_CHECKSUM_new(st) SKM_sk_new(KRB5_CHECKSUM, (st))
-#define sk_KRB5_CHECKSUM_new_null() SKM_sk_new_null(KRB5_CHECKSUM)
-#define sk_KRB5_CHECKSUM_free(st) SKM_sk_free(KRB5_CHECKSUM, (st))
-#define sk_KRB5_CHECKSUM_num(st) SKM_sk_num(KRB5_CHECKSUM, (st))
-#define sk_KRB5_CHECKSUM_value(st, i) SKM_sk_value(KRB5_CHECKSUM, (st), (i))
-#define sk_KRB5_CHECKSUM_set(st, i, val) SKM_sk_set(KRB5_CHECKSUM, (st), (i), (val))
-#define sk_KRB5_CHECKSUM_zero(st) SKM_sk_zero(KRB5_CHECKSUM, (st))
-#define sk_KRB5_CHECKSUM_push(st, val) SKM_sk_push(KRB5_CHECKSUM, (st), (val))
-#define sk_KRB5_CHECKSUM_unshift(st, val) SKM_sk_unshift(KRB5_CHECKSUM, (st), (val))
-#define sk_KRB5_CHECKSUM_find(st, val) SKM_sk_find(KRB5_CHECKSUM, (st), (val))
-#define sk_KRB5_CHECKSUM_find_ex(st, val) SKM_sk_find_ex(KRB5_CHECKSUM, (st), (val))
-#define sk_KRB5_CHECKSUM_delete(st, i) SKM_sk_delete(KRB5_CHECKSUM, (st), (i))
-#define sk_KRB5_CHECKSUM_delete_ptr(st, ptr) SKM_sk_delete_ptr(KRB5_CHECKSUM, (st), (ptr))
-#define sk_KRB5_CHECKSUM_insert(st, val, i) SKM_sk_insert(KRB5_CHECKSUM, (st), (val), (i))
-#define sk_KRB5_CHECKSUM_set_cmp_func(st, cmp) SKM_sk_set_cmp_func(KRB5_CHECKSUM, (st), (cmp))
-#define sk_KRB5_CHECKSUM_dup(st) SKM_sk_dup(KRB5_CHECKSUM, st)
-#define sk_KRB5_CHECKSUM_pop_free(st, free_func) SKM_sk_pop_free(KRB5_CHECKSUM, (st), (free_func))
-#define sk_KRB5_CHECKSUM_shift(st) SKM_sk_shift(KRB5_CHECKSUM, (st))
-#define sk_KRB5_CHECKSUM_pop(st) SKM_sk_pop(KRB5_CHECKSUM, (st))
-#define sk_KRB5_CHECKSUM_sort(st) SKM_sk_sort(KRB5_CHECKSUM, (st))
-#define sk_KRB5_CHECKSUM_is_sorted(st) SKM_sk_is_sorted(KRB5_CHECKSUM, (st))
-
-#define sk_KRB5_ENCDATA_new(st) SKM_sk_new(KRB5_ENCDATA, (st))
-#define sk_KRB5_ENCDATA_new_null() SKM_sk_new_null(KRB5_ENCDATA)
-#define sk_KRB5_ENCDATA_free(st) SKM_sk_free(KRB5_ENCDATA, (st))
-#define sk_KRB5_ENCDATA_num(st) SKM_sk_num(KRB5_ENCDATA, (st))
-#define sk_KRB5_ENCDATA_value(st, i) SKM_sk_value(KRB5_ENCDATA, (st), (i))
-#define sk_KRB5_ENCDATA_set(st, i, val) SKM_sk_set(KRB5_ENCDATA, (st), (i), (val))
-#define sk_KRB5_ENCDATA_zero(st) SKM_sk_zero(KRB5_ENCDATA, (st))
-#define sk_KRB5_ENCDATA_push(st, val) SKM_sk_push(KRB5_ENCDATA, (st), (val))
-#define sk_KRB5_ENCDATA_unshift(st, val) SKM_sk_unshift(KRB5_ENCDATA, (st), (val))
-#define sk_KRB5_ENCDATA_find(st, val) SKM_sk_find(KRB5_ENCDATA, (st), (val))
-#define sk_KRB5_ENCDATA_find_ex(st, val) SKM_sk_find_ex(KRB5_ENCDATA, (st), (val))
-#define sk_KRB5_ENCDATA_delete(st, i) SKM_sk_delete(KRB5_ENCDATA, (st), (i))
-#define sk_KRB5_ENCDATA_delete_ptr(st, ptr) SKM_sk_delete_ptr(KRB5_ENCDATA, (st), (ptr))
-#define sk_KRB5_ENCDATA_insert(st, val, i) SKM_sk_insert(KRB5_ENCDATA, (st), (val), (i))
-#define sk_KRB5_ENCDATA_set_cmp_func(st, cmp) SKM_sk_set_cmp_func(KRB5_ENCDATA, (st), (cmp))
-#define sk_KRB5_ENCDATA_dup(st) SKM_sk_dup(KRB5_ENCDATA, st)
-#define sk_KRB5_ENCDATA_pop_free(st, free_func) SKM_sk_pop_free(KRB5_ENCDATA, (st), (free_func))
-#define sk_KRB5_ENCDATA_shift(st) SKM_sk_shift(KRB5_ENCDATA, (st))
-#define sk_KRB5_ENCDATA_pop(st) SKM_sk_pop(KRB5_ENCDATA, (st))
-#define sk_KRB5_ENCDATA_sort(st) SKM_sk_sort(KRB5_ENCDATA, (st))
-#define sk_KRB5_ENCDATA_is_sorted(st) SKM_sk_is_sorted(KRB5_ENCDATA, (st))
-
-#define sk_KRB5_ENCKEY_new(st) SKM_sk_new(KRB5_ENCKEY, (st))
-#define sk_KRB5_ENCKEY_new_null() SKM_sk_new_null(KRB5_ENCKEY)
-#define sk_KRB5_ENCKEY_free(st) SKM_sk_free(KRB5_ENCKEY, (st))
-#define sk_KRB5_ENCKEY_num(st) SKM_sk_num(KRB5_ENCKEY, (st))
-#define sk_KRB5_ENCKEY_value(st, i) SKM_sk_value(KRB5_ENCKEY, (st), (i))
-#define sk_KRB5_ENCKEY_set(st, i, val) SKM_sk_set(KRB5_ENCKEY, (st), (i), (val))
-#define sk_KRB5_ENCKEY_zero(st) SKM_sk_zero(KRB5_ENCKEY, (st))
-#define sk_KRB5_ENCKEY_push(st, val) SKM_sk_push(KRB5_ENCKEY, (st), (val))
-#define sk_KRB5_ENCKEY_unshift(st, val) SKM_sk_unshift(KRB5_ENCKEY, (st), (val))
-#define sk_KRB5_ENCKEY_find(st, val) SKM_sk_find(KRB5_ENCKEY, (st), (val))
-#define sk_KRB5_ENCKEY_find_ex(st, val) SKM_sk_find_ex(KRB5_ENCKEY, (st), (val))
-#define sk_KRB5_ENCKEY_delete(st, i) SKM_sk_delete(KRB5_ENCKEY, (st), (i))
-#define sk_KRB5_ENCKEY_delete_ptr(st, ptr) SKM_sk_delete_ptr(KRB5_ENCKEY, (st), (ptr))
-#define sk_KRB5_ENCKEY_insert(st, val, i) SKM_sk_insert(KRB5_ENCKEY, (st), (val), (i))
-#define sk_KRB5_ENCKEY_set_cmp_func(st, cmp) SKM_sk_set_cmp_func(KRB5_ENCKEY, (st), (cmp))
-#define sk_KRB5_ENCKEY_dup(st) SKM_sk_dup(KRB5_ENCKEY, st)
-#define sk_KRB5_ENCKEY_pop_free(st, free_func) SKM_sk_pop_free(KRB5_ENCKEY, (st), (free_func))
-#define sk_KRB5_ENCKEY_shift(st) SKM_sk_shift(KRB5_ENCKEY, (st))
-#define sk_KRB5_ENCKEY_pop(st) SKM_sk_pop(KRB5_ENCKEY, (st))
-#define sk_KRB5_ENCKEY_sort(st) SKM_sk_sort(KRB5_ENCKEY, (st))
-#define sk_KRB5_ENCKEY_is_sorted(st) SKM_sk_is_sorted(KRB5_ENCKEY, (st))
-
-#define sk_KRB5_PRINCNAME_new(st) SKM_sk_new(KRB5_PRINCNAME, (st))
-#define sk_KRB5_PRINCNAME_new_null() SKM_sk_new_null(KRB5_PRINCNAME)
-#define sk_KRB5_PRINCNAME_free(st) SKM_sk_free(KRB5_PRINCNAME, (st))
-#define sk_KRB5_PRINCNAME_num(st) SKM_sk_num(KRB5_PRINCNAME, (st))
-#define sk_KRB5_PRINCNAME_value(st, i) SKM_sk_value(KRB5_PRINCNAME, (st), (i))
-#define sk_KRB5_PRINCNAME_set(st, i, val) SKM_sk_set(KRB5_PRINCNAME, (st), (i), (val))
-#define sk_KRB5_PRINCNAME_zero(st) SKM_sk_zero(KRB5_PRINCNAME, (st))
-#define sk_KRB5_PRINCNAME_push(st, val) SKM_sk_push(KRB5_PRINCNAME, (st), (val))
-#define sk_KRB5_PRINCNAME_unshift(st, val) SKM_sk_unshift(KRB5_PRINCNAME, (st), (val))
-#define sk_KRB5_PRINCNAME_find(st, val) SKM_sk_find(KRB5_PRINCNAME, (st), (val))
-#define sk_KRB5_PRINCNAME_find_ex(st, val) SKM_sk_find_ex(KRB5_PRINCNAME, (st), (val))
-#define sk_KRB5_PRINCNAME_delete(st, i) SKM_sk_delete(KRB5_PRINCNAME, (st), (i))
-#define sk_KRB5_PRINCNAME_delete_ptr(st, ptr) SKM_sk_delete_ptr(KRB5_PRINCNAME, (st), (ptr))
-#define sk_KRB5_PRINCNAME_insert(st, val, i) SKM_sk_insert(KRB5_PRINCNAME, (st), (val), (i))
-#define sk_KRB5_PRINCNAME_set_cmp_func(st, cmp) SKM_sk_set_cmp_func(KRB5_PRINCNAME, (st), (cmp))
-#define sk_KRB5_PRINCNAME_dup(st) SKM_sk_dup(KRB5_PRINCNAME, st)
-#define sk_KRB5_PRINCNAME_pop_free(st, free_func) SKM_sk_pop_free(KRB5_PRINCNAME, (st), (free_func))
-#define sk_KRB5_PRINCNAME_shift(st) SKM_sk_shift(KRB5_PRINCNAME, (st))
-#define sk_KRB5_PRINCNAME_pop(st) SKM_sk_pop(KRB5_PRINCNAME, (st))
-#define sk_KRB5_PRINCNAME_sort(st) SKM_sk_sort(KRB5_PRINCNAME, (st))
-#define sk_KRB5_PRINCNAME_is_sorted(st) SKM_sk_is_sorted(KRB5_PRINCNAME, (st))
-
-#define sk_KRB5_TKTBODY_new(st) SKM_sk_new(KRB5_TKTBODY, (st))
-#define sk_KRB5_TKTBODY_new_null() SKM_sk_new_null(KRB5_TKTBODY)
-#define sk_KRB5_TKTBODY_free(st) SKM_sk_free(KRB5_TKTBODY, (st))
-#define sk_KRB5_TKTBODY_num(st) SKM_sk_num(KRB5_TKTBODY, (st))
-#define sk_KRB5_TKTBODY_value(st, i) SKM_sk_value(KRB5_TKTBODY, (st), (i))
-#define sk_KRB5_TKTBODY_set(st, i, val) SKM_sk_set(KRB5_TKTBODY, (st), (i), (val))
-#define sk_KRB5_TKTBODY_zero(st) SKM_sk_zero(KRB5_TKTBODY, (st))
-#define sk_KRB5_TKTBODY_push(st, val) SKM_sk_push(KRB5_TKTBODY, (st), (val))
-#define sk_KRB5_TKTBODY_unshift(st, val) SKM_sk_unshift(KRB5_TKTBODY, (st), (val))
-#define sk_KRB5_TKTBODY_find(st, val) SKM_sk_find(KRB5_TKTBODY, (st), (val))
-#define sk_KRB5_TKTBODY_find_ex(st, val) SKM_sk_find_ex(KRB5_TKTBODY, (st), (val))
-#define sk_KRB5_TKTBODY_delete(st, i) SKM_sk_delete(KRB5_TKTBODY, (st), (i))
-#define sk_KRB5_TKTBODY_delete_ptr(st, ptr) SKM_sk_delete_ptr(KRB5_TKTBODY, (st), (ptr))
-#define sk_KRB5_TKTBODY_insert(st, val, i) SKM_sk_insert(KRB5_TKTBODY, (st), (val), (i))
-#define sk_KRB5_TKTBODY_set_cmp_func(st, cmp) SKM_sk_set_cmp_func(KRB5_TKTBODY, (st), (cmp))
-#define sk_KRB5_TKTBODY_dup(st) SKM_sk_dup(KRB5_TKTBODY, st)
-#define sk_KRB5_TKTBODY_pop_free(st, free_func) SKM_sk_pop_free(KRB5_TKTBODY, (st), (free_func))
-#define sk_KRB5_TKTBODY_shift(st) SKM_sk_shift(KRB5_TKTBODY, (st))
-#define sk_KRB5_TKTBODY_pop(st) SKM_sk_pop(KRB5_TKTBODY, (st))
-#define sk_KRB5_TKTBODY_sort(st) SKM_sk_sort(KRB5_TKTBODY, (st))
-#define sk_KRB5_TKTBODY_is_sorted(st) SKM_sk_is_sorted(KRB5_TKTBODY, (st))
-
-#define sk_MIME_HEADER_new(st) SKM_sk_new(MIME_HEADER, (st))
-#define sk_MIME_HEADER_new_null() SKM_sk_new_null(MIME_HEADER)
-#define sk_MIME_HEADER_free(st) SKM_sk_free(MIME_HEADER, (st))
-#define sk_MIME_HEADER_num(st) SKM_sk_num(MIME_HEADER, (st))
-#define sk_MIME_HEADER_value(st, i) SKM_sk_value(MIME_HEADER, (st), (i))
-#define sk_MIME_HEADER_set(st, i, val) SKM_sk_set(MIME_HEADER, (st), (i), (val))
-#define sk_MIME_HEADER_zero(st) SKM_sk_zero(MIME_HEADER, (st))
-#define sk_MIME_HEADER_push(st, val) SKM_sk_push(MIME_HEADER, (st), (val))
-#define sk_MIME_HEADER_unshift(st, val) SKM_sk_unshift(MIME_HEADER, (st), (val))
-#define sk_MIME_HEADER_find(st, val) SKM_sk_find(MIME_HEADER, (st), (val))
-#define sk_MIME_HEADER_find_ex(st, val) SKM_sk_find_ex(MIME_HEADER, (st), (val))
-#define sk_MIME_HEADER_delete(st, i) SKM_sk_delete(MIME_HEADER, (st), (i))
-#define sk_MIME_HEADER_delete_ptr(st, ptr) SKM_sk_delete_ptr(MIME_HEADER, (st), (ptr))
-#define sk_MIME_HEADER_insert(st, val, i) SKM_sk_insert(MIME_HEADER, (st), (val), (i))
-#define sk_MIME_HEADER_set_cmp_func(st, cmp) SKM_sk_set_cmp_func(MIME_HEADER, (st), (cmp))
-#define sk_MIME_HEADER_dup(st) SKM_sk_dup(MIME_HEADER, st)
-#define sk_MIME_HEADER_pop_free(st, free_func) SKM_sk_pop_free(MIME_HEADER, (st), (free_func))
-#define sk_MIME_HEADER_shift(st) SKM_sk_shift(MIME_HEADER, (st))
-#define sk_MIME_HEADER_pop(st) SKM_sk_pop(MIME_HEADER, (st))
-#define sk_MIME_HEADER_sort(st) SKM_sk_sort(MIME_HEADER, (st))
-#define sk_MIME_HEADER_is_sorted(st) SKM_sk_is_sorted(MIME_HEADER, (st))
-
-#define sk_MIME_PARAM_new(st) SKM_sk_new(MIME_PARAM, (st))
-#define sk_MIME_PARAM_new_null() SKM_sk_new_null(MIME_PARAM)
-#define sk_MIME_PARAM_free(st) SKM_sk_free(MIME_PARAM, (st))
-#define sk_MIME_PARAM_num(st) SKM_sk_num(MIME_PARAM, (st))
-#define sk_MIME_PARAM_value(st, i) SKM_sk_value(MIME_PARAM, (st), (i))
-#define sk_MIME_PARAM_set(st, i, val) SKM_sk_set(MIME_PARAM, (st), (i), (val))
-#define sk_MIME_PARAM_zero(st) SKM_sk_zero(MIME_PARAM, (st))
-#define sk_MIME_PARAM_push(st, val) SKM_sk_push(MIME_PARAM, (st), (val))
-#define sk_MIME_PARAM_unshift(st, val) SKM_sk_unshift(MIME_PARAM, (st), (val))
-#define sk_MIME_PARAM_find(st, val) SKM_sk_find(MIME_PARAM, (st), (val))
-#define sk_MIME_PARAM_find_ex(st, val) SKM_sk_find_ex(MIME_PARAM, (st), (val))
-#define sk_MIME_PARAM_delete(st, i) SKM_sk_delete(MIME_PARAM, (st), (i))
-#define sk_MIME_PARAM_delete_ptr(st, ptr) SKM_sk_delete_ptr(MIME_PARAM, (st), (ptr))
-#define sk_MIME_PARAM_insert(st, val, i) SKM_sk_insert(MIME_PARAM, (st), (val), (i))
-#define sk_MIME_PARAM_set_cmp_func(st, cmp) SKM_sk_set_cmp_func(MIME_PARAM, (st), (cmp))
-#define sk_MIME_PARAM_dup(st) SKM_sk_dup(MIME_PARAM, st)
-#define sk_MIME_PARAM_pop_free(st, free_func) SKM_sk_pop_free(MIME_PARAM, (st), (free_func))
-#define sk_MIME_PARAM_shift(st) SKM_sk_shift(MIME_PARAM, (st))
-#define sk_MIME_PARAM_pop(st) SKM_sk_pop(MIME_PARAM, (st))
-#define sk_MIME_PARAM_sort(st) SKM_sk_sort(MIME_PARAM, (st))
-#define sk_MIME_PARAM_is_sorted(st) SKM_sk_is_sorted(MIME_PARAM, (st))
-
-#define sk_NAME_FUNCS_new(st) SKM_sk_new(NAME_FUNCS, (st))
-#define sk_NAME_FUNCS_new_null() SKM_sk_new_null(NAME_FUNCS)
-#define sk_NAME_FUNCS_free(st) SKM_sk_free(NAME_FUNCS, (st))
-#define sk_NAME_FUNCS_num(st) SKM_sk_num(NAME_FUNCS, (st))
-#define sk_NAME_FUNCS_value(st, i) SKM_sk_value(NAME_FUNCS, (st), (i))
-#define sk_NAME_FUNCS_set(st, i, val) SKM_sk_set(NAME_FUNCS, (st), (i), (val))
-#define sk_NAME_FUNCS_zero(st) SKM_sk_zero(NAME_FUNCS, (st))
-#define sk_NAME_FUNCS_push(st, val) SKM_sk_push(NAME_FUNCS, (st), (val))
-#define sk_NAME_FUNCS_unshift(st, val) SKM_sk_unshift(NAME_FUNCS, (st), (val))
-#define sk_NAME_FUNCS_find(st, val) SKM_sk_find(NAME_FUNCS, (st), (val))
-#define sk_NAME_FUNCS_find_ex(st, val) SKM_sk_find_ex(NAME_FUNCS, (st), (val))
-#define sk_NAME_FUNCS_delete(st, i) SKM_sk_delete(NAME_FUNCS, (st), (i))
-#define sk_NAME_FUNCS_delete_ptr(st, ptr) SKM_sk_delete_ptr(NAME_FUNCS, (st), (ptr))
-#define sk_NAME_FUNCS_insert(st, val, i) SKM_sk_insert(NAME_FUNCS, (st), (val), (i))
-#define sk_NAME_FUNCS_set_cmp_func(st, cmp) SKM_sk_set_cmp_func(NAME_FUNCS, (st), (cmp))
-#define sk_NAME_FUNCS_dup(st) SKM_sk_dup(NAME_FUNCS, st)
-#define sk_NAME_FUNCS_pop_free(st, free_func) SKM_sk_pop_free(NAME_FUNCS, (st), (free_func))
-#define sk_NAME_FUNCS_shift(st) SKM_sk_shift(NAME_FUNCS, (st))
-#define sk_NAME_FUNCS_pop(st) SKM_sk_pop(NAME_FUNCS, (st))
-#define sk_NAME_FUNCS_sort(st) SKM_sk_sort(NAME_FUNCS, (st))
-#define sk_NAME_FUNCS_is_sorted(st) SKM_sk_is_sorted(NAME_FUNCS, (st))
-
-#define sk_OCSP_CERTID_new(st) SKM_sk_new(OCSP_CERTID, (st))
-#define sk_OCSP_CERTID_new_null() SKM_sk_new_null(OCSP_CERTID)
-#define sk_OCSP_CERTID_free(st) SKM_sk_free(OCSP_CERTID, (st))
-#define sk_OCSP_CERTID_num(st) SKM_sk_num(OCSP_CERTID, (st))
-#define sk_OCSP_CERTID_value(st, i) SKM_sk_value(OCSP_CERTID, (st), (i))
-#define sk_OCSP_CERTID_set(st, i, val) SKM_sk_set(OCSP_CERTID, (st), (i), (val))
-#define sk_OCSP_CERTID_zero(st) SKM_sk_zero(OCSP_CERTID, (st))
-#define sk_OCSP_CERTID_push(st, val) SKM_sk_push(OCSP_CERTID, (st), (val))
-#define sk_OCSP_CERTID_unshift(st, val) SKM_sk_unshift(OCSP_CERTID, (st), (val))
-#define sk_OCSP_CERTID_find(st, val) SKM_sk_find(OCSP_CERTID, (st), (val))
-#define sk_OCSP_CERTID_find_ex(st, val) SKM_sk_find_ex(OCSP_CERTID, (st), (val))
-#define sk_OCSP_CERTID_delete(st, i) SKM_sk_delete(OCSP_CERTID, (st), (i))
-#define sk_OCSP_CERTID_delete_ptr(st, ptr) SKM_sk_delete_ptr(OCSP_CERTID, (st), (ptr))
-#define sk_OCSP_CERTID_insert(st, val, i) SKM_sk_insert(OCSP_CERTID, (st), (val), (i))
-#define sk_OCSP_CERTID_set_cmp_func(st, cmp) SKM_sk_set_cmp_func(OCSP_CERTID, (st), (cmp))
-#define sk_OCSP_CERTID_dup(st) SKM_sk_dup(OCSP_CERTID, st)
-#define sk_OCSP_CERTID_pop_free(st, free_func) SKM_sk_pop_free(OCSP_CERTID, (st), (free_func))
-#define sk_OCSP_CERTID_shift(st) SKM_sk_shift(OCSP_CERTID, (st))
-#define sk_OCSP_CERTID_pop(st) SKM_sk_pop(OCSP_CERTID, (st))
-#define sk_OCSP_CERTID_sort(st) SKM_sk_sort(OCSP_CERTID, (st))
-#define sk_OCSP_CERTID_is_sorted(st) SKM_sk_is_sorted(OCSP_CERTID, (st))
-
-#define sk_OCSP_ONEREQ_new(st) SKM_sk_new(OCSP_ONEREQ, (st))
-#define sk_OCSP_ONEREQ_new_null() SKM_sk_new_null(OCSP_ONEREQ)
-#define sk_OCSP_ONEREQ_free(st) SKM_sk_free(OCSP_ONEREQ, (st))
-#define sk_OCSP_ONEREQ_num(st) SKM_sk_num(OCSP_ONEREQ, (st))
-#define sk_OCSP_ONEREQ_value(st, i) SKM_sk_value(OCSP_ONEREQ, (st), (i))
-#define sk_OCSP_ONEREQ_set(st, i, val) SKM_sk_set(OCSP_ONEREQ, (st), (i), (val))
-#define sk_OCSP_ONEREQ_zero(st) SKM_sk_zero(OCSP_ONEREQ, (st))
-#define sk_OCSP_ONEREQ_push(st, val) SKM_sk_push(OCSP_ONEREQ, (st), (val))
-#define sk_OCSP_ONEREQ_unshift(st, val) SKM_sk_unshift(OCSP_ONEREQ, (st), (val))
-#define sk_OCSP_ONEREQ_find(st, val) SKM_sk_find(OCSP_ONEREQ, (st), (val))
-#define sk_OCSP_ONEREQ_find_ex(st, val) SKM_sk_find_ex(OCSP_ONEREQ, (st), (val))
-#define sk_OCSP_ONEREQ_delete(st, i) SKM_sk_delete(OCSP_ONEREQ, (st), (i))
-#define sk_OCSP_ONEREQ_delete_ptr(st, ptr) SKM_sk_delete_ptr(OCSP_ONEREQ, (st), (ptr))
-#define sk_OCSP_ONEREQ_insert(st, val, i) SKM_sk_insert(OCSP_ONEREQ, (st), (val), (i))
-#define sk_OCSP_ONEREQ_set_cmp_func(st, cmp) SKM_sk_set_cmp_func(OCSP_ONEREQ, (st), (cmp))
-#define sk_OCSP_ONEREQ_dup(st) SKM_sk_dup(OCSP_ONEREQ, st)
-#define sk_OCSP_ONEREQ_pop_free(st, free_func) SKM_sk_pop_free(OCSP_ONEREQ, (st), (free_func))
-#define sk_OCSP_ONEREQ_shift(st) SKM_sk_shift(OCSP_ONEREQ, (st))
-#define sk_OCSP_ONEREQ_pop(st) SKM_sk_pop(OCSP_ONEREQ, (st))
-#define sk_OCSP_ONEREQ_sort(st) SKM_sk_sort(OCSP_ONEREQ, (st))
-#define sk_OCSP_ONEREQ_is_sorted(st) SKM_sk_is_sorted(OCSP_ONEREQ, (st))
-
-#define sk_OCSP_SINGLERESP_new(st) SKM_sk_new(OCSP_SINGLERESP, (st))
-#define sk_OCSP_SINGLERESP_new_null() SKM_sk_new_null(OCSP_SINGLERESP)
-#define sk_OCSP_SINGLERESP_free(st) SKM_sk_free(OCSP_SINGLERESP, (st))
-#define sk_OCSP_SINGLERESP_num(st) SKM_sk_num(OCSP_SINGLERESP, (st))
-#define sk_OCSP_SINGLERESP_value(st, i) SKM_sk_value(OCSP_SINGLERESP, (st), (i))
-#define sk_OCSP_SINGLERESP_set(st, i, val) SKM_sk_set(OCSP_SINGLERESP, (st), (i), (val))
-#define sk_OCSP_SINGLERESP_zero(st) SKM_sk_zero(OCSP_SINGLERESP, (st))
-#define sk_OCSP_SINGLERESP_push(st, val) SKM_sk_push(OCSP_SINGLERESP, (st), (val))
-#define sk_OCSP_SINGLERESP_unshift(st, val) SKM_sk_unshift(OCSP_SINGLERESP, (st), (val))
-#define sk_OCSP_SINGLERESP_find(st, val) SKM_sk_find(OCSP_SINGLERESP, (st), (val))
-#define sk_OCSP_SINGLERESP_find_ex(st, val) SKM_sk_find_ex(OCSP_SINGLERESP, (st), (val))
-#define sk_OCSP_SINGLERESP_delete(st, i) SKM_sk_delete(OCSP_SINGLERESP, (st), (i))
-#define sk_OCSP_SINGLERESP_delete_ptr(st, ptr) SKM_sk_delete_ptr(OCSP_SINGLERESP, (st), (ptr))
-#define sk_OCSP_SINGLERESP_insert(st, val, i) SKM_sk_insert(OCSP_SINGLERESP, (st), (val), (i))
-#define sk_OCSP_SINGLERESP_set_cmp_func(st, cmp) SKM_sk_set_cmp_func(OCSP_SINGLERESP, (st), (cmp))
-#define sk_OCSP_SINGLERESP_dup(st) SKM_sk_dup(OCSP_SINGLERESP, st)
-#define sk_OCSP_SINGLERESP_pop_free(st, free_func) SKM_sk_pop_free(OCSP_SINGLERESP, (st), (free_func))
-#define sk_OCSP_SINGLERESP_shift(st) SKM_sk_shift(OCSP_SINGLERESP, (st))
-#define sk_OCSP_SINGLERESP_pop(st) SKM_sk_pop(OCSP_SINGLERESP, (st))
-#define sk_OCSP_SINGLERESP_sort(st) SKM_sk_sort(OCSP_SINGLERESP, (st))
-#define sk_OCSP_SINGLERESP_is_sorted(st) SKM_sk_is_sorted(OCSP_SINGLERESP, (st))
-
-#define sk_PKCS12_SAFEBAG_new(st) SKM_sk_new(PKCS12_SAFEBAG, (st))
-#define sk_PKCS12_SAFEBAG_new_null() SKM_sk_new_null(PKCS12_SAFEBAG)
-#define sk_PKCS12_SAFEBAG_free(st) SKM_sk_free(PKCS12_SAFEBAG, (st))
-#define sk_PKCS12_SAFEBAG_num(st) SKM_sk_num(PKCS12_SAFEBAG, (st))
-#define sk_PKCS12_SAFEBAG_value(st, i) SKM_sk_value(PKCS12_SAFEBAG, (st), (i))
-#define sk_PKCS12_SAFEBAG_set(st, i, val) SKM_sk_set(PKCS12_SAFEBAG, (st), (i), (val))
-#define sk_PKCS12_SAFEBAG_zero(st) SKM_sk_zero(PKCS12_SAFEBAG, (st))
-#define sk_PKCS12_SAFEBAG_push(st, val) SKM_sk_push(PKCS12_SAFEBAG, (st), (val))
-#define sk_PKCS12_SAFEBAG_unshift(st, val) SKM_sk_unshift(PKCS12_SAFEBAG, (st), (val))
-#define sk_PKCS12_SAFEBAG_find(st, val) SKM_sk_find(PKCS12_SAFEBAG, (st), (val))
-#define sk_PKCS12_SAFEBAG_find_ex(st, val) SKM_sk_find_ex(PKCS12_SAFEBAG, (st), (val))
-#define sk_PKCS12_SAFEBAG_delete(st, i) SKM_sk_delete(PKCS12_SAFEBAG, (st), (i))
-#define sk_PKCS12_SAFEBAG_delete_ptr(st, ptr) SKM_sk_delete_ptr(PKCS12_SAFEBAG, (st), (ptr))
-#define sk_PKCS12_SAFEBAG_insert(st, val, i) SKM_sk_insert(PKCS12_SAFEBAG, (st), (val), (i))
-#define sk_PKCS12_SAFEBAG_set_cmp_func(st, cmp) SKM_sk_set_cmp_func(PKCS12_SAFEBAG, (st), (cmp))
-#define sk_PKCS12_SAFEBAG_dup(st) SKM_sk_dup(PKCS12_SAFEBAG, st)
-#define sk_PKCS12_SAFEBAG_pop_free(st, free_func) SKM_sk_pop_free(PKCS12_SAFEBAG, (st), (free_func))
-#define sk_PKCS12_SAFEBAG_shift(st) SKM_sk_shift(PKCS12_SAFEBAG, (st))
-#define sk_PKCS12_SAFEBAG_pop(st) SKM_sk_pop(PKCS12_SAFEBAG, (st))
-#define sk_PKCS12_SAFEBAG_sort(st) SKM_sk_sort(PKCS12_SAFEBAG, (st))
-#define sk_PKCS12_SAFEBAG_is_sorted(st) SKM_sk_is_sorted(PKCS12_SAFEBAG, (st))
-
-#define sk_PKCS7_new(st) SKM_sk_new(PKCS7, (st))
-#define sk_PKCS7_new_null() SKM_sk_new_null(PKCS7)
-#define sk_PKCS7_free(st) SKM_sk_free(PKCS7, (st))
-#define sk_PKCS7_num(st) SKM_sk_num(PKCS7, (st))
-#define sk_PKCS7_value(st, i) SKM_sk_value(PKCS7, (st), (i))
-#define sk_PKCS7_set(st, i, val) SKM_sk_set(PKCS7, (st), (i), (val))
-#define sk_PKCS7_zero(st) SKM_sk_zero(PKCS7, (st))
-#define sk_PKCS7_push(st, val) SKM_sk_push(PKCS7, (st), (val))
-#define sk_PKCS7_unshift(st, val) SKM_sk_unshift(PKCS7, (st), (val))
-#define sk_PKCS7_find(st, val) SKM_sk_find(PKCS7, (st), (val))
-#define sk_PKCS7_find_ex(st, val) SKM_sk_find_ex(PKCS7, (st), (val))
-#define sk_PKCS7_delete(st, i) SKM_sk_delete(PKCS7, (st), (i))
-#define sk_PKCS7_delete_ptr(st, ptr) SKM_sk_delete_ptr(PKCS7, (st), (ptr))
-#define sk_PKCS7_insert(st, val, i) SKM_sk_insert(PKCS7, (st), (val), (i))
-#define sk_PKCS7_set_cmp_func(st, cmp) SKM_sk_set_cmp_func(PKCS7, (st), (cmp))
-#define sk_PKCS7_dup(st) SKM_sk_dup(PKCS7, st)
-#define sk_PKCS7_pop_free(st, free_func) SKM_sk_pop_free(PKCS7, (st), (free_func))
-#define sk_PKCS7_shift(st) SKM_sk_shift(PKCS7, (st))
-#define sk_PKCS7_pop(st) SKM_sk_pop(PKCS7, (st))
-#define sk_PKCS7_sort(st) SKM_sk_sort(PKCS7, (st))
-#define sk_PKCS7_is_sorted(st) SKM_sk_is_sorted(PKCS7, (st))
-
-#define sk_PKCS7_RECIP_INFO_new(st) SKM_sk_new(PKCS7_RECIP_INFO, (st))
-#define sk_PKCS7_RECIP_INFO_new_null() SKM_sk_new_null(PKCS7_RECIP_INFO)
-#define sk_PKCS7_RECIP_INFO_free(st) SKM_sk_free(PKCS7_RECIP_INFO, (st))
-#define sk_PKCS7_RECIP_INFO_num(st) SKM_sk_num(PKCS7_RECIP_INFO, (st))
-#define sk_PKCS7_RECIP_INFO_value(st, i) SKM_sk_value(PKCS7_RECIP_INFO, (st), (i))
-#define sk_PKCS7_RECIP_INFO_set(st, i, val) SKM_sk_set(PKCS7_RECIP_INFO, (st), (i), (val))
-#define sk_PKCS7_RECIP_INFO_zero(st) SKM_sk_zero(PKCS7_RECIP_INFO, (st))
-#define sk_PKCS7_RECIP_INFO_push(st, val) SKM_sk_push(PKCS7_RECIP_INFO, (st), (val))
-#define sk_PKCS7_RECIP_INFO_unshift(st, val) SKM_sk_unshift(PKCS7_RECIP_INFO, (st), (val))
-#define sk_PKCS7_RECIP_INFO_find(st, val) SKM_sk_find(PKCS7_RECIP_INFO, (st), (val))
-#define sk_PKCS7_RECIP_INFO_find_ex(st, val) SKM_sk_find_ex(PKCS7_RECIP_INFO, (st), (val))
-#define sk_PKCS7_RECIP_INFO_delete(st, i) SKM_sk_delete(PKCS7_RECIP_INFO, (st), (i))
-#define sk_PKCS7_RECIP_INFO_delete_ptr(st, ptr) SKM_sk_delete_ptr(PKCS7_RECIP_INFO, (st), (ptr))
-#define sk_PKCS7_RECIP_INFO_insert(st, val, i) SKM_sk_insert(PKCS7_RECIP_INFO, (st), (val), (i))
-#define sk_PKCS7_RECIP_INFO_set_cmp_func(st, cmp) SKM_sk_set_cmp_func(PKCS7_RECIP_INFO, (st), (cmp))
-#define sk_PKCS7_RECIP_INFO_dup(st) SKM_sk_dup(PKCS7_RECIP_INFO, st)
-#define sk_PKCS7_RECIP_INFO_pop_free(st, free_func) SKM_sk_pop_free(PKCS7_RECIP_INFO, (st), (free_func))
-#define sk_PKCS7_RECIP_INFO_shift(st) SKM_sk_shift(PKCS7_RECIP_INFO, (st))
-#define sk_PKCS7_RECIP_INFO_pop(st) SKM_sk_pop(PKCS7_RECIP_INFO, (st))
-#define sk_PKCS7_RECIP_INFO_sort(st) SKM_sk_sort(PKCS7_RECIP_INFO, (st))
-#define sk_PKCS7_RECIP_INFO_is_sorted(st) SKM_sk_is_sorted(PKCS7_RECIP_INFO, (st))
-
-#define sk_PKCS7_SIGNER_INFO_new(st) SKM_sk_new(PKCS7_SIGNER_INFO, (st))
-#define sk_PKCS7_SIGNER_INFO_new_null() SKM_sk_new_null(PKCS7_SIGNER_INFO)
-#define sk_PKCS7_SIGNER_INFO_free(st) SKM_sk_free(PKCS7_SIGNER_INFO, (st))
-#define sk_PKCS7_SIGNER_INFO_num(st) SKM_sk_num(PKCS7_SIGNER_INFO, (st))
-#define sk_PKCS7_SIGNER_INFO_value(st, i) SKM_sk_value(PKCS7_SIGNER_INFO, (st), (i))
-#define sk_PKCS7_SIGNER_INFO_set(st, i, val) SKM_sk_set(PKCS7_SIGNER_INFO, (st), (i), (val))
-#define sk_PKCS7_SIGNER_INFO_zero(st) SKM_sk_zero(PKCS7_SIGNER_INFO, (st))
-#define sk_PKCS7_SIGNER_INFO_push(st, val) SKM_sk_push(PKCS7_SIGNER_INFO, (st), (val))
-#define sk_PKCS7_SIGNER_INFO_unshift(st, val) SKM_sk_unshift(PKCS7_SIGNER_INFO, (st), (val))
-#define sk_PKCS7_SIGNER_INFO_find(st, val) SKM_sk_find(PKCS7_SIGNER_INFO, (st), (val))
-#define sk_PKCS7_SIGNER_INFO_find_ex(st, val) SKM_sk_find_ex(PKCS7_SIGNER_INFO, (st), (val))
-#define sk_PKCS7_SIGNER_INFO_delete(st, i) SKM_sk_delete(PKCS7_SIGNER_INFO, (st), (i))
-#define sk_PKCS7_SIGNER_INFO_delete_ptr(st, ptr) SKM_sk_delete_ptr(PKCS7_SIGNER_INFO, (st), (ptr))
-#define sk_PKCS7_SIGNER_INFO_insert(st, val, i) SKM_sk_insert(PKCS7_SIGNER_INFO, (st), (val), (i))
-#define sk_PKCS7_SIGNER_INFO_set_cmp_func(st, cmp) SKM_sk_set_cmp_func(PKCS7_SIGNER_INFO, (st), (cmp))
-#define sk_PKCS7_SIGNER_INFO_dup(st) SKM_sk_dup(PKCS7_SIGNER_INFO, st)
-#define sk_PKCS7_SIGNER_INFO_pop_free(st, free_func) SKM_sk_pop_free(PKCS7_SIGNER_INFO, (st), (free_func))
-#define sk_PKCS7_SIGNER_INFO_shift(st) SKM_sk_shift(PKCS7_SIGNER_INFO, (st))
-#define sk_PKCS7_SIGNER_INFO_pop(st) SKM_sk_pop(PKCS7_SIGNER_INFO, (st))
-#define sk_PKCS7_SIGNER_INFO_sort(st) SKM_sk_sort(PKCS7_SIGNER_INFO, (st))
-#define sk_PKCS7_SIGNER_INFO_is_sorted(st) SKM_sk_is_sorted(PKCS7_SIGNER_INFO, (st))
-
-#define sk_POLICYINFO_new(st) SKM_sk_new(POLICYINFO, (st))
-#define sk_POLICYINFO_new_null() SKM_sk_new_null(POLICYINFO)
-#define sk_POLICYINFO_free(st) SKM_sk_free(POLICYINFO, (st))
-#define sk_POLICYINFO_num(st) SKM_sk_num(POLICYINFO, (st))
-#define sk_POLICYINFO_value(st, i) SKM_sk_value(POLICYINFO, (st), (i))
-#define sk_POLICYINFO_set(st, i, val) SKM_sk_set(POLICYINFO, (st), (i), (val))
-#define sk_POLICYINFO_zero(st) SKM_sk_zero(POLICYINFO, (st))
-#define sk_POLICYINFO_push(st, val) SKM_sk_push(POLICYINFO, (st), (val))
-#define sk_POLICYINFO_unshift(st, val) SKM_sk_unshift(POLICYINFO, (st), (val))
-#define sk_POLICYINFO_find(st, val) SKM_sk_find(POLICYINFO, (st), (val))
-#define sk_POLICYINFO_find_ex(st, val) SKM_sk_find_ex(POLICYINFO, (st), (val))
-#define sk_POLICYINFO_delete(st, i) SKM_sk_delete(POLICYINFO, (st), (i))
-#define sk_POLICYINFO_delete_ptr(st, ptr) SKM_sk_delete_ptr(POLICYINFO, (st), (ptr))
-#define sk_POLICYINFO_insert(st, val, i) SKM_sk_insert(POLICYINFO, (st), (val), (i))
-#define sk_POLICYINFO_set_cmp_func(st, cmp) SKM_sk_set_cmp_func(POLICYINFO, (st), (cmp))
-#define sk_POLICYINFO_dup(st) SKM_sk_dup(POLICYINFO, st)
-#define sk_POLICYINFO_pop_free(st, free_func) SKM_sk_pop_free(POLICYINFO, (st), (free_func))
-#define sk_POLICYINFO_shift(st) SKM_sk_shift(POLICYINFO, (st))
-#define sk_POLICYINFO_pop(st) SKM_sk_pop(POLICYINFO, (st))
-#define sk_POLICYINFO_sort(st) SKM_sk_sort(POLICYINFO, (st))
-#define sk_POLICYINFO_is_sorted(st) SKM_sk_is_sorted(POLICYINFO, (st))
-
-#define sk_POLICYQUALINFO_new(st) SKM_sk_new(POLICYQUALINFO, (st))
-#define sk_POLICYQUALINFO_new_null() SKM_sk_new_null(POLICYQUALINFO)
-#define sk_POLICYQUALINFO_free(st) SKM_sk_free(POLICYQUALINFO, (st))
-#define sk_POLICYQUALINFO_num(st) SKM_sk_num(POLICYQUALINFO, (st))
-#define sk_POLICYQUALINFO_value(st, i) SKM_sk_value(POLICYQUALINFO, (st), (i))
-#define sk_POLICYQUALINFO_set(st, i, val) SKM_sk_set(POLICYQUALINFO, (st), (i), (val))
-#define sk_POLICYQUALINFO_zero(st) SKM_sk_zero(POLICYQUALINFO, (st))
-#define sk_POLICYQUALINFO_push(st, val) SKM_sk_push(POLICYQUALINFO, (st), (val))
-#define sk_POLICYQUALINFO_unshift(st, val) SKM_sk_unshift(POLICYQUALINFO, (st), (val))
-#define sk_POLICYQUALINFO_find(st, val) SKM_sk_find(POLICYQUALINFO, (st), (val))
-#define sk_POLICYQUALINFO_find_ex(st, val) SKM_sk_find_ex(POLICYQUALINFO, (st), (val))
-#define sk_POLICYQUALINFO_delete(st, i) SKM_sk_delete(POLICYQUALINFO, (st), (i))
-#define sk_POLICYQUALINFO_delete_ptr(st, ptr) SKM_sk_delete_ptr(POLICYQUALINFO, (st), (ptr))
-#define sk_POLICYQUALINFO_insert(st, val, i) SKM_sk_insert(POLICYQUALINFO, (st), (val), (i))
-#define sk_POLICYQUALINFO_set_cmp_func(st, cmp) SKM_sk_set_cmp_func(POLICYQUALINFO, (st), (cmp))
-#define sk_POLICYQUALINFO_dup(st) SKM_sk_dup(POLICYQUALINFO, st)
-#define sk_POLICYQUALINFO_pop_free(st, free_func) SKM_sk_pop_free(POLICYQUALINFO, (st), (free_func))
-#define sk_POLICYQUALINFO_shift(st) SKM_sk_shift(POLICYQUALINFO, (st))
-#define sk_POLICYQUALINFO_pop(st) SKM_sk_pop(POLICYQUALINFO, (st))
-#define sk_POLICYQUALINFO_sort(st) SKM_sk_sort(POLICYQUALINFO, (st))
-#define sk_POLICYQUALINFO_is_sorted(st) SKM_sk_is_sorted(POLICYQUALINFO, (st))
-
-#define sk_POLICY_MAPPING_new(st) SKM_sk_new(POLICY_MAPPING, (st))
-#define sk_POLICY_MAPPING_new_null() SKM_sk_new_null(POLICY_MAPPING)
-#define sk_POLICY_MAPPING_free(st) SKM_sk_free(POLICY_MAPPING, (st))
-#define sk_POLICY_MAPPING_num(st) SKM_sk_num(POLICY_MAPPING, (st))
-#define sk_POLICY_MAPPING_value(st, i) SKM_sk_value(POLICY_MAPPING, (st), (i))
-#define sk_POLICY_MAPPING_set(st, i, val) SKM_sk_set(POLICY_MAPPING, (st), (i), (val))
-#define sk_POLICY_MAPPING_zero(st) SKM_sk_zero(POLICY_MAPPING, (st))
-#define sk_POLICY_MAPPING_push(st, val) SKM_sk_push(POLICY_MAPPING, (st), (val))
-#define sk_POLICY_MAPPING_unshift(st, val) SKM_sk_unshift(POLICY_MAPPING, (st), (val))
-#define sk_POLICY_MAPPING_find(st, val) SKM_sk_find(POLICY_MAPPING, (st), (val))
-#define sk_POLICY_MAPPING_find_ex(st, val) SKM_sk_find_ex(POLICY_MAPPING, (st), (val))
-#define sk_POLICY_MAPPING_delete(st, i) SKM_sk_delete(POLICY_MAPPING, (st), (i))
-#define sk_POLICY_MAPPING_delete_ptr(st, ptr) SKM_sk_delete_ptr(POLICY_MAPPING, (st), (ptr))
-#define sk_POLICY_MAPPING_insert(st, val, i) SKM_sk_insert(POLICY_MAPPING, (st), (val), (i))
-#define sk_POLICY_MAPPING_set_cmp_func(st, cmp) SKM_sk_set_cmp_func(POLICY_MAPPING, (st), (cmp))
-#define sk_POLICY_MAPPING_dup(st) SKM_sk_dup(POLICY_MAPPING, st)
-#define sk_POLICY_MAPPING_pop_free(st, free_func) SKM_sk_pop_free(POLICY_MAPPING, (st), (free_func))
-#define sk_POLICY_MAPPING_shift(st) SKM_sk_shift(POLICY_MAPPING, (st))
-#define sk_POLICY_MAPPING_pop(st) SKM_sk_pop(POLICY_MAPPING, (st))
-#define sk_POLICY_MAPPING_sort(st) SKM_sk_sort(POLICY_MAPPING, (st))
-#define sk_POLICY_MAPPING_is_sorted(st) SKM_sk_is_sorted(POLICY_MAPPING, (st))
-
-#define sk_SSL_CIPHER_new(st) SKM_sk_new(SSL_CIPHER, (st))
-#define sk_SSL_CIPHER_new_null() SKM_sk_new_null(SSL_CIPHER)
-#define sk_SSL_CIPHER_free(st) SKM_sk_free(SSL_CIPHER, (st))
-#define sk_SSL_CIPHER_num(st) SKM_sk_num(SSL_CIPHER, (st))
-#define sk_SSL_CIPHER_value(st, i) SKM_sk_value(SSL_CIPHER, (st), (i))
-#define sk_SSL_CIPHER_set(st, i, val) SKM_sk_set(SSL_CIPHER, (st), (i), (val))
-#define sk_SSL_CIPHER_zero(st) SKM_sk_zero(SSL_CIPHER, (st))
-#define sk_SSL_CIPHER_push(st, val) SKM_sk_push(SSL_CIPHER, (st), (val))
-#define sk_SSL_CIPHER_unshift(st, val) SKM_sk_unshift(SSL_CIPHER, (st), (val))
-#define sk_SSL_CIPHER_find(st, val) SKM_sk_find(SSL_CIPHER, (st), (val))
-#define sk_SSL_CIPHER_find_ex(st, val) SKM_sk_find_ex(SSL_CIPHER, (st), (val))
-#define sk_SSL_CIPHER_delete(st, i) SKM_sk_delete(SSL_CIPHER, (st), (i))
-#define sk_SSL_CIPHER_delete_ptr(st, ptr) SKM_sk_delete_ptr(SSL_CIPHER, (st), (ptr))
-#define sk_SSL_CIPHER_insert(st, val, i) SKM_sk_insert(SSL_CIPHER, (st), (val), (i))
-#define sk_SSL_CIPHER_set_cmp_func(st, cmp) SKM_sk_set_cmp_func(SSL_CIPHER, (st), (cmp))
-#define sk_SSL_CIPHER_dup(st) SKM_sk_dup(SSL_CIPHER, st)
-#define sk_SSL_CIPHER_pop_free(st, free_func) SKM_sk_pop_free(SSL_CIPHER, (st), (free_func))
-#define sk_SSL_CIPHER_shift(st) SKM_sk_shift(SSL_CIPHER, (st))
-#define sk_SSL_CIPHER_pop(st) SKM_sk_pop(SSL_CIPHER, (st))
-#define sk_SSL_CIPHER_sort(st) SKM_sk_sort(SSL_CIPHER, (st))
-#define sk_SSL_CIPHER_is_sorted(st) SKM_sk_is_sorted(SSL_CIPHER, (st))
-
-#define sk_SSL_COMP_new(st) SKM_sk_new(SSL_COMP, (st))
-#define sk_SSL_COMP_new_null() SKM_sk_new_null(SSL_COMP)
-#define sk_SSL_COMP_free(st) SKM_sk_free(SSL_COMP, (st))
-#define sk_SSL_COMP_num(st) SKM_sk_num(SSL_COMP, (st))
-#define sk_SSL_COMP_value(st, i) SKM_sk_value(SSL_COMP, (st), (i))
-#define sk_SSL_COMP_set(st, i, val) SKM_sk_set(SSL_COMP, (st), (i), (val))
-#define sk_SSL_COMP_zero(st) SKM_sk_zero(SSL_COMP, (st))
-#define sk_SSL_COMP_push(st, val) SKM_sk_push(SSL_COMP, (st), (val))
-#define sk_SSL_COMP_unshift(st, val) SKM_sk_unshift(SSL_COMP, (st), (val))
-#define sk_SSL_COMP_find(st, val) SKM_sk_find(SSL_COMP, (st), (val))
-#define sk_SSL_COMP_find_ex(st, val) SKM_sk_find_ex(SSL_COMP, (st), (val))
-#define sk_SSL_COMP_delete(st, i) SKM_sk_delete(SSL_COMP, (st), (i))
-#define sk_SSL_COMP_delete_ptr(st, ptr) SKM_sk_delete_ptr(SSL_COMP, (st), (ptr))
-#define sk_SSL_COMP_insert(st, val, i) SKM_sk_insert(SSL_COMP, (st), (val), (i))
-#define sk_SSL_COMP_set_cmp_func(st, cmp) SKM_sk_set_cmp_func(SSL_COMP, (st), (cmp))
-#define sk_SSL_COMP_dup(st) SKM_sk_dup(SSL_COMP, st)
-#define sk_SSL_COMP_pop_free(st, free_func) SKM_sk_pop_free(SSL_COMP, (st), (free_func))
-#define sk_SSL_COMP_shift(st) SKM_sk_shift(SSL_COMP, (st))
-#define sk_SSL_COMP_pop(st) SKM_sk_pop(SSL_COMP, (st))
-#define sk_SSL_COMP_sort(st) SKM_sk_sort(SSL_COMP, (st))
-#define sk_SSL_COMP_is_sorted(st) SKM_sk_is_sorted(SSL_COMP, (st))
-
-#define sk_STORE_OBJECT_new(st) SKM_sk_new(STORE_OBJECT, (st))
-#define sk_STORE_OBJECT_new_null() SKM_sk_new_null(STORE_OBJECT)
-#define sk_STORE_OBJECT_free(st) SKM_sk_free(STORE_OBJECT, (st))
-#define sk_STORE_OBJECT_num(st) SKM_sk_num(STORE_OBJECT, (st))
-#define sk_STORE_OBJECT_value(st, i) SKM_sk_value(STORE_OBJECT, (st), (i))
-#define sk_STORE_OBJECT_set(st, i, val) SKM_sk_set(STORE_OBJECT, (st), (i), (val))
-#define sk_STORE_OBJECT_zero(st) SKM_sk_zero(STORE_OBJECT, (st))
-#define sk_STORE_OBJECT_push(st, val) SKM_sk_push(STORE_OBJECT, (st), (val))
-#define sk_STORE_OBJECT_unshift(st, val) SKM_sk_unshift(STORE_OBJECT, (st), (val))
-#define sk_STORE_OBJECT_find(st, val) SKM_sk_find(STORE_OBJECT, (st), (val))
-#define sk_STORE_OBJECT_find_ex(st, val) SKM_sk_find_ex(STORE_OBJECT, (st), (val))
-#define sk_STORE_OBJECT_delete(st, i) SKM_sk_delete(STORE_OBJECT, (st), (i))
-#define sk_STORE_OBJECT_delete_ptr(st, ptr) SKM_sk_delete_ptr(STORE_OBJECT, (st), (ptr))
-#define sk_STORE_OBJECT_insert(st, val, i) SKM_sk_insert(STORE_OBJECT, (st), (val), (i))
-#define sk_STORE_OBJECT_set_cmp_func(st, cmp) SKM_sk_set_cmp_func(STORE_OBJECT, (st), (cmp))
-#define sk_STORE_OBJECT_dup(st) SKM_sk_dup(STORE_OBJECT, st)
-#define sk_STORE_OBJECT_pop_free(st, free_func) SKM_sk_pop_free(STORE_OBJECT, (st), (free_func))
-#define sk_STORE_OBJECT_shift(st) SKM_sk_shift(STORE_OBJECT, (st))
-#define sk_STORE_OBJECT_pop(st) SKM_sk_pop(STORE_OBJECT, (st))
-#define sk_STORE_OBJECT_sort(st) SKM_sk_sort(STORE_OBJECT, (st))
-#define sk_STORE_OBJECT_is_sorted(st) SKM_sk_is_sorted(STORE_OBJECT, (st))
-
-#define sk_SXNETID_new(st) SKM_sk_new(SXNETID, (st))
-#define sk_SXNETID_new_null() SKM_sk_new_null(SXNETID)
-#define sk_SXNETID_free(st) SKM_sk_free(SXNETID, (st))
-#define sk_SXNETID_num(st) SKM_sk_num(SXNETID, (st))
-#define sk_SXNETID_value(st, i) SKM_sk_value(SXNETID, (st), (i))
-#define sk_SXNETID_set(st, i, val) SKM_sk_set(SXNETID, (st), (i), (val))
-#define sk_SXNETID_zero(st) SKM_sk_zero(SXNETID, (st))
-#define sk_SXNETID_push(st, val) SKM_sk_push(SXNETID, (st), (val))
-#define sk_SXNETID_unshift(st, val) SKM_sk_unshift(SXNETID, (st), (val))
-#define sk_SXNETID_find(st, val) SKM_sk_find(SXNETID, (st), (val))
-#define sk_SXNETID_find_ex(st, val) SKM_sk_find_ex(SXNETID, (st), (val))
-#define sk_SXNETID_delete(st, i) SKM_sk_delete(SXNETID, (st), (i))
-#define sk_SXNETID_delete_ptr(st, ptr) SKM_sk_delete_ptr(SXNETID, (st), (ptr))
-#define sk_SXNETID_insert(st, val, i) SKM_sk_insert(SXNETID, (st), (val), (i))
-#define sk_SXNETID_set_cmp_func(st, cmp) SKM_sk_set_cmp_func(SXNETID, (st), (cmp))
-#define sk_SXNETID_dup(st) SKM_sk_dup(SXNETID, st)
-#define sk_SXNETID_pop_free(st, free_func) SKM_sk_pop_free(SXNETID, (st), (free_func))
-#define sk_SXNETID_shift(st) SKM_sk_shift(SXNETID, (st))
-#define sk_SXNETID_pop(st) SKM_sk_pop(SXNETID, (st))
-#define sk_SXNETID_sort(st) SKM_sk_sort(SXNETID, (st))
-#define sk_SXNETID_is_sorted(st) SKM_sk_is_sorted(SXNETID, (st))
-
-#define sk_UI_STRING_new(st) SKM_sk_new(UI_STRING, (st))
-#define sk_UI_STRING_new_null() SKM_sk_new_null(UI_STRING)
-#define sk_UI_STRING_free(st) SKM_sk_free(UI_STRING, (st))
-#define sk_UI_STRING_num(st) SKM_sk_num(UI_STRING, (st))
-#define sk_UI_STRING_value(st, i) SKM_sk_value(UI_STRING, (st), (i))
-#define sk_UI_STRING_set(st, i, val) SKM_sk_set(UI_STRING, (st), (i), (val))
-#define sk_UI_STRING_zero(st) SKM_sk_zero(UI_STRING, (st))
-#define sk_UI_STRING_push(st, val) SKM_sk_push(UI_STRING, (st), (val))
-#define sk_UI_STRING_unshift(st, val) SKM_sk_unshift(UI_STRING, (st), (val))
-#define sk_UI_STRING_find(st, val) SKM_sk_find(UI_STRING, (st), (val))
-#define sk_UI_STRING_find_ex(st, val) SKM_sk_find_ex(UI_STRING, (st), (val))
-#define sk_UI_STRING_delete(st, i) SKM_sk_delete(UI_STRING, (st), (i))
-#define sk_UI_STRING_delete_ptr(st, ptr) SKM_sk_delete_ptr(UI_STRING, (st), (ptr))
-#define sk_UI_STRING_insert(st, val, i) SKM_sk_insert(UI_STRING, (st), (val), (i))
-#define sk_UI_STRING_set_cmp_func(st, cmp) SKM_sk_set_cmp_func(UI_STRING, (st), (cmp))
-#define sk_UI_STRING_dup(st) SKM_sk_dup(UI_STRING, st)
-#define sk_UI_STRING_pop_free(st, free_func) SKM_sk_pop_free(UI_STRING, (st), (free_func))
-#define sk_UI_STRING_shift(st) SKM_sk_shift(UI_STRING, (st))
-#define sk_UI_STRING_pop(st) SKM_sk_pop(UI_STRING, (st))
-#define sk_UI_STRING_sort(st) SKM_sk_sort(UI_STRING, (st))
-#define sk_UI_STRING_is_sorted(st) SKM_sk_is_sorted(UI_STRING, (st))
-
-#define sk_X509_new(st) SKM_sk_new(X509, (st))
-#define sk_X509_new_null() SKM_sk_new_null(X509)
-#define sk_X509_free(st) SKM_sk_free(X509, (st))
-#define sk_X509_num(st) SKM_sk_num(X509, (st))
-#define sk_X509_value(st, i) SKM_sk_value(X509, (st), (i))
-#define sk_X509_set(st, i, val) SKM_sk_set(X509, (st), (i), (val))
-#define sk_X509_zero(st) SKM_sk_zero(X509, (st))
-#define sk_X509_push(st, val) SKM_sk_push(X509, (st), (val))
-#define sk_X509_unshift(st, val) SKM_sk_unshift(X509, (st), (val))
-#define sk_X509_find(st, val) SKM_sk_find(X509, (st), (val))
-#define sk_X509_find_ex(st, val) SKM_sk_find_ex(X509, (st), (val))
-#define sk_X509_delete(st, i) SKM_sk_delete(X509, (st), (i))
-#define sk_X509_delete_ptr(st, ptr) SKM_sk_delete_ptr(X509, (st), (ptr))
-#define sk_X509_insert(st, val, i) SKM_sk_insert(X509, (st), (val), (i))
-#define sk_X509_set_cmp_func(st, cmp) SKM_sk_set_cmp_func(X509, (st), (cmp))
-#define sk_X509_dup(st) SKM_sk_dup(X509, st)
-#define sk_X509_pop_free(st, free_func) SKM_sk_pop_free(X509, (st), (free_func))
-#define sk_X509_shift(st) SKM_sk_shift(X509, (st))
-#define sk_X509_pop(st) SKM_sk_pop(X509, (st))
-#define sk_X509_sort(st) SKM_sk_sort(X509, (st))
-#define sk_X509_is_sorted(st) SKM_sk_is_sorted(X509, (st))
-
-#define sk_X509V3_EXT_METHOD_new(st) SKM_sk_new(X509V3_EXT_METHOD, (st))
-#define sk_X509V3_EXT_METHOD_new_null() SKM_sk_new_null(X509V3_EXT_METHOD)
-#define sk_X509V3_EXT_METHOD_free(st) SKM_sk_free(X509V3_EXT_METHOD, (st))
-#define sk_X509V3_EXT_METHOD_num(st) SKM_sk_num(X509V3_EXT_METHOD, (st))
-#define sk_X509V3_EXT_METHOD_value(st, i) SKM_sk_value(X509V3_EXT_METHOD, (st), (i))
-#define sk_X509V3_EXT_METHOD_set(st, i, val) SKM_sk_set(X509V3_EXT_METHOD, (st), (i), (val))
-#define sk_X509V3_EXT_METHOD_zero(st) SKM_sk_zero(X509V3_EXT_METHOD, (st))
-#define sk_X509V3_EXT_METHOD_push(st, val) SKM_sk_push(X509V3_EXT_METHOD, (st), (val))
-#define sk_X509V3_EXT_METHOD_unshift(st, val) SKM_sk_unshift(X509V3_EXT_METHOD, (st), (val))
-#define sk_X509V3_EXT_METHOD_find(st, val) SKM_sk_find(X509V3_EXT_METHOD, (st), (val))
-#define sk_X509V3_EXT_METHOD_find_ex(st, val) SKM_sk_find_ex(X509V3_EXT_METHOD, (st), (val))
-#define sk_X509V3_EXT_METHOD_delete(st, i) SKM_sk_delete(X509V3_EXT_METHOD, (st), (i))
-#define sk_X509V3_EXT_METHOD_delete_ptr(st, ptr) SKM_sk_delete_ptr(X509V3_EXT_METHOD, (st), (ptr))
-#define sk_X509V3_EXT_METHOD_insert(st, val, i) SKM_sk_insert(X509V3_EXT_METHOD, (st), (val), (i))
-#define sk_X509V3_EXT_METHOD_set_cmp_func(st, cmp) SKM_sk_set_cmp_func(X509V3_EXT_METHOD, (st), (cmp))
-#define sk_X509V3_EXT_METHOD_dup(st) SKM_sk_dup(X509V3_EXT_METHOD, st)
-#define sk_X509V3_EXT_METHOD_pop_free(st, free_func) SKM_sk_pop_free(X509V3_EXT_METHOD, (st), (free_func))
-#define sk_X509V3_EXT_METHOD_shift(st) SKM_sk_shift(X509V3_EXT_METHOD, (st))
-#define sk_X509V3_EXT_METHOD_pop(st) SKM_sk_pop(X509V3_EXT_METHOD, (st))
-#define sk_X509V3_EXT_METHOD_sort(st) SKM_sk_sort(X509V3_EXT_METHOD, (st))
-#define sk_X509V3_EXT_METHOD_is_sorted(st) SKM_sk_is_sorted(X509V3_EXT_METHOD, (st))
-
-#define sk_X509_ALGOR_new(st) SKM_sk_new(X509_ALGOR, (st))
-#define sk_X509_ALGOR_new_null() SKM_sk_new_null(X509_ALGOR)
-#define sk_X509_ALGOR_free(st) SKM_sk_free(X509_ALGOR, (st))
-#define sk_X509_ALGOR_num(st) SKM_sk_num(X509_ALGOR, (st))
-#define sk_X509_ALGOR_value(st, i) SKM_sk_value(X509_ALGOR, (st), (i))
-#define sk_X509_ALGOR_set(st, i, val) SKM_sk_set(X509_ALGOR, (st), (i), (val))
-#define sk_X509_ALGOR_zero(st) SKM_sk_zero(X509_ALGOR, (st))
-#define sk_X509_ALGOR_push(st, val) SKM_sk_push(X509_ALGOR, (st), (val))
-#define sk_X509_ALGOR_unshift(st, val) SKM_sk_unshift(X509_ALGOR, (st), (val))
-#define sk_X509_ALGOR_find(st, val) SKM_sk_find(X509_ALGOR, (st), (val))
-#define sk_X509_ALGOR_find_ex(st, val) SKM_sk_find_ex(X509_ALGOR, (st), (val))
-#define sk_X509_ALGOR_delete(st, i) SKM_sk_delete(X509_ALGOR, (st), (i))
-#define sk_X509_ALGOR_delete_ptr(st, ptr) SKM_sk_delete_ptr(X509_ALGOR, (st), (ptr))
-#define sk_X509_ALGOR_insert(st, val, i) SKM_sk_insert(X509_ALGOR, (st), (val), (i))
-#define sk_X509_ALGOR_set_cmp_func(st, cmp) SKM_sk_set_cmp_func(X509_ALGOR, (st), (cmp))
-#define sk_X509_ALGOR_dup(st) SKM_sk_dup(X509_ALGOR, st)
-#define sk_X509_ALGOR_pop_free(st, free_func) SKM_sk_pop_free(X509_ALGOR, (st), (free_func))
-#define sk_X509_ALGOR_shift(st) SKM_sk_shift(X509_ALGOR, (st))
-#define sk_X509_ALGOR_pop(st) SKM_sk_pop(X509_ALGOR, (st))
-#define sk_X509_ALGOR_sort(st) SKM_sk_sort(X509_ALGOR, (st))
-#define sk_X509_ALGOR_is_sorted(st) SKM_sk_is_sorted(X509_ALGOR, (st))
-
-#define sk_X509_ATTRIBUTE_new(st) SKM_sk_new(X509_ATTRIBUTE, (st))
-#define sk_X509_ATTRIBUTE_new_null() SKM_sk_new_null(X509_ATTRIBUTE)
-#define sk_X509_ATTRIBUTE_free(st) SKM_sk_free(X509_ATTRIBUTE, (st))
-#define sk_X509_ATTRIBUTE_num(st) SKM_sk_num(X509_ATTRIBUTE, (st))
-#define sk_X509_ATTRIBUTE_value(st, i) SKM_sk_value(X509_ATTRIBUTE, (st), (i))
-#define sk_X509_ATTRIBUTE_set(st, i, val) SKM_sk_set(X509_ATTRIBUTE, (st), (i), (val))
-#define sk_X509_ATTRIBUTE_zero(st) SKM_sk_zero(X509_ATTRIBUTE, (st))
-#define sk_X509_ATTRIBUTE_push(st, val) SKM_sk_push(X509_ATTRIBUTE, (st), (val))
-#define sk_X509_ATTRIBUTE_unshift(st, val) SKM_sk_unshift(X509_ATTRIBUTE, (st), (val))
-#define sk_X509_ATTRIBUTE_find(st, val) SKM_sk_find(X509_ATTRIBUTE, (st), (val))
-#define sk_X509_ATTRIBUTE_find_ex(st, val) SKM_sk_find_ex(X509_ATTRIBUTE, (st), (val))
-#define sk_X509_ATTRIBUTE_delete(st, i) SKM_sk_delete(X509_ATTRIBUTE, (st), (i))
-#define sk_X509_ATTRIBUTE_delete_ptr(st, ptr) SKM_sk_delete_ptr(X509_ATTRIBUTE, (st), (ptr))
-#define sk_X509_ATTRIBUTE_insert(st, val, i) SKM_sk_insert(X509_ATTRIBUTE, (st), (val), (i))
-#define sk_X509_ATTRIBUTE_set_cmp_func(st, cmp) SKM_sk_set_cmp_func(X509_ATTRIBUTE, (st), (cmp))
-#define sk_X509_ATTRIBUTE_dup(st) SKM_sk_dup(X509_ATTRIBUTE, st)
-#define sk_X509_ATTRIBUTE_pop_free(st, free_func) SKM_sk_pop_free(X509_ATTRIBUTE, (st), (free_func))
-#define sk_X509_ATTRIBUTE_shift(st) SKM_sk_shift(X509_ATTRIBUTE, (st))
-#define sk_X509_ATTRIBUTE_pop(st) SKM_sk_pop(X509_ATTRIBUTE, (st))
-#define sk_X509_ATTRIBUTE_sort(st) SKM_sk_sort(X509_ATTRIBUTE, (st))
-#define sk_X509_ATTRIBUTE_is_sorted(st) SKM_sk_is_sorted(X509_ATTRIBUTE, (st))
-
-#define sk_X509_CRL_new(st) SKM_sk_new(X509_CRL, (st))
-#define sk_X509_CRL_new_null() SKM_sk_new_null(X509_CRL)
-#define sk_X509_CRL_free(st) SKM_sk_free(X509_CRL, (st))
-#define sk_X509_CRL_num(st) SKM_sk_num(X509_CRL, (st))
-#define sk_X509_CRL_value(st, i) SKM_sk_value(X509_CRL, (st), (i))
-#define sk_X509_CRL_set(st, i, val) SKM_sk_set(X509_CRL, (st), (i), (val))
-#define sk_X509_CRL_zero(st) SKM_sk_zero(X509_CRL, (st))
-#define sk_X509_CRL_push(st, val) SKM_sk_push(X509_CRL, (st), (val))
-#define sk_X509_CRL_unshift(st, val) SKM_sk_unshift(X509_CRL, (st), (val))
-#define sk_X509_CRL_find(st, val) SKM_sk_find(X509_CRL, (st), (val))
-#define sk_X509_CRL_find_ex(st, val) SKM_sk_find_ex(X509_CRL, (st), (val))
-#define sk_X509_CRL_delete(st, i) SKM_sk_delete(X509_CRL, (st), (i))
-#define sk_X509_CRL_delete_ptr(st, ptr) SKM_sk_delete_ptr(X509_CRL, (st), (ptr))
-#define sk_X509_CRL_insert(st, val, i) SKM_sk_insert(X509_CRL, (st), (val), (i))
-#define sk_X509_CRL_set_cmp_func(st, cmp) SKM_sk_set_cmp_func(X509_CRL, (st), (cmp))
-#define sk_X509_CRL_dup(st) SKM_sk_dup(X509_CRL, st)
-#define sk_X509_CRL_pop_free(st, free_func) SKM_sk_pop_free(X509_CRL, (st), (free_func))
-#define sk_X509_CRL_shift(st) SKM_sk_shift(X509_CRL, (st))
-#define sk_X509_CRL_pop(st) SKM_sk_pop(X509_CRL, (st))
-#define sk_X509_CRL_sort(st) SKM_sk_sort(X509_CRL, (st))
-#define sk_X509_CRL_is_sorted(st) SKM_sk_is_sorted(X509_CRL, (st))
-
-#define sk_X509_EXTENSION_new(st) SKM_sk_new(X509_EXTENSION, (st))
-#define sk_X509_EXTENSION_new_null() SKM_sk_new_null(X509_EXTENSION)
-#define sk_X509_EXTENSION_free(st) SKM_sk_free(X509_EXTENSION, (st))
-#define sk_X509_EXTENSION_num(st) SKM_sk_num(X509_EXTENSION, (st))
-#define sk_X509_EXTENSION_value(st, i) SKM_sk_value(X509_EXTENSION, (st), (i))
-#define sk_X509_EXTENSION_set(st, i, val) SKM_sk_set(X509_EXTENSION, (st), (i), (val))
-#define sk_X509_EXTENSION_zero(st) SKM_sk_zero(X509_EXTENSION, (st))
-#define sk_X509_EXTENSION_push(st, val) SKM_sk_push(X509_EXTENSION, (st), (val))
-#define sk_X509_EXTENSION_unshift(st, val) SKM_sk_unshift(X509_EXTENSION, (st), (val))
-#define sk_X509_EXTENSION_find(st, val) SKM_sk_find(X509_EXTENSION, (st), (val))
-#define sk_X509_EXTENSION_find_ex(st, val) SKM_sk_find_ex(X509_EXTENSION, (st), (val))
-#define sk_X509_EXTENSION_delete(st, i) SKM_sk_delete(X509_EXTENSION, (st), (i))
-#define sk_X509_EXTENSION_delete_ptr(st, ptr) SKM_sk_delete_ptr(X509_EXTENSION, (st), (ptr))
-#define sk_X509_EXTENSION_insert(st, val, i) SKM_sk_insert(X509_EXTENSION, (st), (val), (i))
-#define sk_X509_EXTENSION_set_cmp_func(st, cmp) SKM_sk_set_cmp_func(X509_EXTENSION, (st), (cmp))
-#define sk_X509_EXTENSION_dup(st) SKM_sk_dup(X509_EXTENSION, st)
-#define sk_X509_EXTENSION_pop_free(st, free_func) SKM_sk_pop_free(X509_EXTENSION, (st), (free_func))
-#define sk_X509_EXTENSION_shift(st) SKM_sk_shift(X509_EXTENSION, (st))
-#define sk_X509_EXTENSION_pop(st) SKM_sk_pop(X509_EXTENSION, (st))
-#define sk_X509_EXTENSION_sort(st) SKM_sk_sort(X509_EXTENSION, (st))
-#define sk_X509_EXTENSION_is_sorted(st) SKM_sk_is_sorted(X509_EXTENSION, (st))
-
-#define sk_X509_INFO_new(st) SKM_sk_new(X509_INFO, (st))
-#define sk_X509_INFO_new_null() SKM_sk_new_null(X509_INFO)
-#define sk_X509_INFO_free(st) SKM_sk_free(X509_INFO, (st))
-#define sk_X509_INFO_num(st) SKM_sk_num(X509_INFO, (st))
-#define sk_X509_INFO_value(st, i) SKM_sk_value(X509_INFO, (st), (i))
-#define sk_X509_INFO_set(st, i, val) SKM_sk_set(X509_INFO, (st), (i), (val))
-#define sk_X509_INFO_zero(st) SKM_sk_zero(X509_INFO, (st))
-#define sk_X509_INFO_push(st, val) SKM_sk_push(X509_INFO, (st), (val))
-#define sk_X509_INFO_unshift(st, val) SKM_sk_unshift(X509_INFO, (st), (val))
-#define sk_X509_INFO_find(st, val) SKM_sk_find(X509_INFO, (st), (val))
-#define sk_X509_INFO_find_ex(st, val) SKM_sk_find_ex(X509_INFO, (st), (val))
-#define sk_X509_INFO_delete(st, i) SKM_sk_delete(X509_INFO, (st), (i))
-#define sk_X509_INFO_delete_ptr(st, ptr) SKM_sk_delete_ptr(X509_INFO, (st), (ptr))
-#define sk_X509_INFO_insert(st, val, i) SKM_sk_insert(X509_INFO, (st), (val), (i))
-#define sk_X509_INFO_set_cmp_func(st, cmp) SKM_sk_set_cmp_func(X509_INFO, (st), (cmp))
-#define sk_X509_INFO_dup(st) SKM_sk_dup(X509_INFO, st)
-#define sk_X509_INFO_pop_free(st, free_func) SKM_sk_pop_free(X509_INFO, (st), (free_func))
-#define sk_X509_INFO_shift(st) SKM_sk_shift(X509_INFO, (st))
-#define sk_X509_INFO_pop(st) SKM_sk_pop(X509_INFO, (st))
-#define sk_X509_INFO_sort(st) SKM_sk_sort(X509_INFO, (st))
-#define sk_X509_INFO_is_sorted(st) SKM_sk_is_sorted(X509_INFO, (st))
-
-#define sk_X509_LOOKUP_new(st) SKM_sk_new(X509_LOOKUP, (st))
-#define sk_X509_LOOKUP_new_null() SKM_sk_new_null(X509_LOOKUP)
-#define sk_X509_LOOKUP_free(st) SKM_sk_free(X509_LOOKUP, (st))
-#define sk_X509_LOOKUP_num(st) SKM_sk_num(X509_LOOKUP, (st))
-#define sk_X509_LOOKUP_value(st, i) SKM_sk_value(X509_LOOKUP, (st), (i))
-#define sk_X509_LOOKUP_set(st, i, val) SKM_sk_set(X509_LOOKUP, (st), (i), (val))
-#define sk_X509_LOOKUP_zero(st) SKM_sk_zero(X509_LOOKUP, (st))
-#define sk_X509_LOOKUP_push(st, val) SKM_sk_push(X509_LOOKUP, (st), (val))
-#define sk_X509_LOOKUP_unshift(st, val) SKM_sk_unshift(X509_LOOKUP, (st), (val))
-#define sk_X509_LOOKUP_find(st, val) SKM_sk_find(X509_LOOKUP, (st), (val))
-#define sk_X509_LOOKUP_find_ex(st, val) SKM_sk_find_ex(X509_LOOKUP, (st), (val))
-#define sk_X509_LOOKUP_delete(st, i) SKM_sk_delete(X509_LOOKUP, (st), (i))
-#define sk_X509_LOOKUP_delete_ptr(st, ptr) SKM_sk_delete_ptr(X509_LOOKUP, (st), (ptr))
-#define sk_X509_LOOKUP_insert(st, val, i) SKM_sk_insert(X509_LOOKUP, (st), (val), (i))
-#define sk_X509_LOOKUP_set_cmp_func(st, cmp) SKM_sk_set_cmp_func(X509_LOOKUP, (st), (cmp))
-#define sk_X509_LOOKUP_dup(st) SKM_sk_dup(X509_LOOKUP, st)
-#define sk_X509_LOOKUP_pop_free(st, free_func) SKM_sk_pop_free(X509_LOOKUP, (st), (free_func))
-#define sk_X509_LOOKUP_shift(st) SKM_sk_shift(X509_LOOKUP, (st))
-#define sk_X509_LOOKUP_pop(st) SKM_sk_pop(X509_LOOKUP, (st))
-#define sk_X509_LOOKUP_sort(st) SKM_sk_sort(X509_LOOKUP, (st))
-#define sk_X509_LOOKUP_is_sorted(st) SKM_sk_is_sorted(X509_LOOKUP, (st))
-
-#define sk_X509_NAME_new(st) SKM_sk_new(X509_NAME, (st))
-#define sk_X509_NAME_new_null() SKM_sk_new_null(X509_NAME)
-#define sk_X509_NAME_free(st) SKM_sk_free(X509_NAME, (st))
-#define sk_X509_NAME_num(st) SKM_sk_num(X509_NAME, (st))
-#define sk_X509_NAME_value(st, i) SKM_sk_value(X509_NAME, (st), (i))
-#define sk_X509_NAME_set(st, i, val) SKM_sk_set(X509_NAME, (st), (i), (val))
-#define sk_X509_NAME_zero(st) SKM_sk_zero(X509_NAME, (st))
-#define sk_X509_NAME_push(st, val) SKM_sk_push(X509_NAME, (st), (val))
-#define sk_X509_NAME_unshift(st, val) SKM_sk_unshift(X509_NAME, (st), (val))
-#define sk_X509_NAME_find(st, val) SKM_sk_find(X509_NAME, (st), (val))
-#define sk_X509_NAME_find_ex(st, val) SKM_sk_find_ex(X509_NAME, (st), (val))
-#define sk_X509_NAME_delete(st, i) SKM_sk_delete(X509_NAME, (st), (i))
-#define sk_X509_NAME_delete_ptr(st, ptr) SKM_sk_delete_ptr(X509_NAME, (st), (ptr))
-#define sk_X509_NAME_insert(st, val, i) SKM_sk_insert(X509_NAME, (st), (val), (i))
-#define sk_X509_NAME_set_cmp_func(st, cmp) SKM_sk_set_cmp_func(X509_NAME, (st), (cmp))
-#define sk_X509_NAME_dup(st) SKM_sk_dup(X509_NAME, st)
-#define sk_X509_NAME_pop_free(st, free_func) SKM_sk_pop_free(X509_NAME, (st), (free_func))
-#define sk_X509_NAME_shift(st) SKM_sk_shift(X509_NAME, (st))
-#define sk_X509_NAME_pop(st) SKM_sk_pop(X509_NAME, (st))
-#define sk_X509_NAME_sort(st) SKM_sk_sort(X509_NAME, (st))
-#define sk_X509_NAME_is_sorted(st) SKM_sk_is_sorted(X509_NAME, (st))
-
-#define sk_X509_NAME_ENTRY_new(st) SKM_sk_new(X509_NAME_ENTRY, (st))
-#define sk_X509_NAME_ENTRY_new_null() SKM_sk_new_null(X509_NAME_ENTRY)
-#define sk_X509_NAME_ENTRY_free(st) SKM_sk_free(X509_NAME_ENTRY, (st))
-#define sk_X509_NAME_ENTRY_num(st) SKM_sk_num(X509_NAME_ENTRY, (st))
-#define sk_X509_NAME_ENTRY_value(st, i) SKM_sk_value(X509_NAME_ENTRY, (st), (i))
-#define sk_X509_NAME_ENTRY_set(st, i, val) SKM_sk_set(X509_NAME_ENTRY, (st), (i), (val))
-#define sk_X509_NAME_ENTRY_zero(st) SKM_sk_zero(X509_NAME_ENTRY, (st))
-#define sk_X509_NAME_ENTRY_push(st, val) SKM_sk_push(X509_NAME_ENTRY, (st), (val))
-#define sk_X509_NAME_ENTRY_unshift(st, val) SKM_sk_unshift(X509_NAME_ENTRY, (st), (val))
-#define sk_X509_NAME_ENTRY_find(st, val) SKM_sk_find(X509_NAME_ENTRY, (st), (val))
-#define sk_X509_NAME_ENTRY_find_ex(st, val) SKM_sk_find_ex(X509_NAME_ENTRY, (st), (val))
-#define sk_X509_NAME_ENTRY_delete(st, i) SKM_sk_delete(X509_NAME_ENTRY, (st), (i))
-#define sk_X509_NAME_ENTRY_delete_ptr(st, ptr) SKM_sk_delete_ptr(X509_NAME_ENTRY, (st), (ptr))
-#define sk_X509_NAME_ENTRY_insert(st, val, i) SKM_sk_insert(X509_NAME_ENTRY, (st), (val), (i))
-#define sk_X509_NAME_ENTRY_set_cmp_func(st, cmp) SKM_sk_set_cmp_func(X509_NAME_ENTRY, (st), (cmp))
-#define sk_X509_NAME_ENTRY_dup(st) SKM_sk_dup(X509_NAME_ENTRY, st)
-#define sk_X509_NAME_ENTRY_pop_free(st, free_func) SKM_sk_pop_free(X509_NAME_ENTRY, (st), (free_func))
-#define sk_X509_NAME_ENTRY_shift(st) SKM_sk_shift(X509_NAME_ENTRY, (st))
-#define sk_X509_NAME_ENTRY_pop(st) SKM_sk_pop(X509_NAME_ENTRY, (st))
-#define sk_X509_NAME_ENTRY_sort(st) SKM_sk_sort(X509_NAME_ENTRY, (st))
-#define sk_X509_NAME_ENTRY_is_sorted(st) SKM_sk_is_sorted(X509_NAME_ENTRY, (st))
-
-#define sk_X509_OBJECT_new(st) SKM_sk_new(X509_OBJECT, (st))
-#define sk_X509_OBJECT_new_null() SKM_sk_new_null(X509_OBJECT)
-#define sk_X509_OBJECT_free(st) SKM_sk_free(X509_OBJECT, (st))
-#define sk_X509_OBJECT_num(st) SKM_sk_num(X509_OBJECT, (st))
-#define sk_X509_OBJECT_value(st, i) SKM_sk_value(X509_OBJECT, (st), (i))
-#define sk_X509_OBJECT_set(st, i, val) SKM_sk_set(X509_OBJECT, (st), (i), (val))
-#define sk_X509_OBJECT_zero(st) SKM_sk_zero(X509_OBJECT, (st))
-#define sk_X509_OBJECT_push(st, val) SKM_sk_push(X509_OBJECT, (st), (val))
-#define sk_X509_OBJECT_unshift(st, val) SKM_sk_unshift(X509_OBJECT, (st), (val))
-#define sk_X509_OBJECT_find(st, val) SKM_sk_find(X509_OBJECT, (st), (val))
-#define sk_X509_OBJECT_find_ex(st, val) SKM_sk_find_ex(X509_OBJECT, (st), (val))
-#define sk_X509_OBJECT_delete(st, i) SKM_sk_delete(X509_OBJECT, (st), (i))
-#define sk_X509_OBJECT_delete_ptr(st, ptr) SKM_sk_delete_ptr(X509_OBJECT, (st), (ptr))
-#define sk_X509_OBJECT_insert(st, val, i) SKM_sk_insert(X509_OBJECT, (st), (val), (i))
-#define sk_X509_OBJECT_set_cmp_func(st, cmp) SKM_sk_set_cmp_func(X509_OBJECT, (st), (cmp))
-#define sk_X509_OBJECT_dup(st) SKM_sk_dup(X509_OBJECT, st)
-#define sk_X509_OBJECT_pop_free(st, free_func) SKM_sk_pop_free(X509_OBJECT, (st), (free_func))
-#define sk_X509_OBJECT_shift(st) SKM_sk_shift(X509_OBJECT, (st))
-#define sk_X509_OBJECT_pop(st) SKM_sk_pop(X509_OBJECT, (st))
-#define sk_X509_OBJECT_sort(st) SKM_sk_sort(X509_OBJECT, (st))
-#define sk_X509_OBJECT_is_sorted(st) SKM_sk_is_sorted(X509_OBJECT, (st))
-
-#define sk_X509_POLICY_DATA_new(st) SKM_sk_new(X509_POLICY_DATA, (st))
-#define sk_X509_POLICY_DATA_new_null() SKM_sk_new_null(X509_POLICY_DATA)
-#define sk_X509_POLICY_DATA_free(st) SKM_sk_free(X509_POLICY_DATA, (st))
-#define sk_X509_POLICY_DATA_num(st) SKM_sk_num(X509_POLICY_DATA, (st))
-#define sk_X509_POLICY_DATA_value(st, i) SKM_sk_value(X509_POLICY_DATA, (st), (i))
-#define sk_X509_POLICY_DATA_set(st, i, val) SKM_sk_set(X509_POLICY_DATA, (st), (i), (val))
-#define sk_X509_POLICY_DATA_zero(st) SKM_sk_zero(X509_POLICY_DATA, (st))
-#define sk_X509_POLICY_DATA_push(st, val) SKM_sk_push(X509_POLICY_DATA, (st), (val))
-#define sk_X509_POLICY_DATA_unshift(st, val) SKM_sk_unshift(X509_POLICY_DATA, (st), (val))
-#define sk_X509_POLICY_DATA_find(st, val) SKM_sk_find(X509_POLICY_DATA, (st), (val))
-#define sk_X509_POLICY_DATA_find_ex(st, val) SKM_sk_find_ex(X509_POLICY_DATA, (st), (val))
-#define sk_X509_POLICY_DATA_delete(st, i) SKM_sk_delete(X509_POLICY_DATA, (st), (i))
-#define sk_X509_POLICY_DATA_delete_ptr(st, ptr) SKM_sk_delete_ptr(X509_POLICY_DATA, (st), (ptr))
-#define sk_X509_POLICY_DATA_insert(st, val, i) SKM_sk_insert(X509_POLICY_DATA, (st), (val), (i))
-#define sk_X509_POLICY_DATA_set_cmp_func(st, cmp) SKM_sk_set_cmp_func(X509_POLICY_DATA, (st), (cmp))
-#define sk_X509_POLICY_DATA_dup(st) SKM_sk_dup(X509_POLICY_DATA, st)
-#define sk_X509_POLICY_DATA_pop_free(st, free_func) SKM_sk_pop_free(X509_POLICY_DATA, (st), (free_func))
-#define sk_X509_POLICY_DATA_shift(st) SKM_sk_shift(X509_POLICY_DATA, (st))
-#define sk_X509_POLICY_DATA_pop(st) SKM_sk_pop(X509_POLICY_DATA, (st))
-#define sk_X509_POLICY_DATA_sort(st) SKM_sk_sort(X509_POLICY_DATA, (st))
-#define sk_X509_POLICY_DATA_is_sorted(st) SKM_sk_is_sorted(X509_POLICY_DATA, (st))
-
-#define sk_X509_POLICY_NODE_new(st) SKM_sk_new(X509_POLICY_NODE, (st))
-#define sk_X509_POLICY_NODE_new_null() SKM_sk_new_null(X509_POLICY_NODE)
-#define sk_X509_POLICY_NODE_free(st) SKM_sk_free(X509_POLICY_NODE, (st))
-#define sk_X509_POLICY_NODE_num(st) SKM_sk_num(X509_POLICY_NODE, (st))
-#define sk_X509_POLICY_NODE_value(st, i) SKM_sk_value(X509_POLICY_NODE, (st), (i))
-#define sk_X509_POLICY_NODE_set(st, i, val) SKM_sk_set(X509_POLICY_NODE, (st), (i), (val))
-#define sk_X509_POLICY_NODE_zero(st) SKM_sk_zero(X509_POLICY_NODE, (st))
-#define sk_X509_POLICY_NODE_push(st, val) SKM_sk_push(X509_POLICY_NODE, (st), (val))
-#define sk_X509_POLICY_NODE_unshift(st, val) SKM_sk_unshift(X509_POLICY_NODE, (st), (val))
-#define sk_X509_POLICY_NODE_find(st, val) SKM_sk_find(X509_POLICY_NODE, (st), (val))
-#define sk_X509_POLICY_NODE_find_ex(st, val) SKM_sk_find_ex(X509_POLICY_NODE, (st), (val))
-#define sk_X509_POLICY_NODE_delete(st, i) SKM_sk_delete(X509_POLICY_NODE, (st), (i))
-#define sk_X509_POLICY_NODE_delete_ptr(st, ptr) SKM_sk_delete_ptr(X509_POLICY_NODE, (st), (ptr))
-#define sk_X509_POLICY_NODE_insert(st, val, i) SKM_sk_insert(X509_POLICY_NODE, (st), (val), (i))
-#define sk_X509_POLICY_NODE_set_cmp_func(st, cmp) SKM_sk_set_cmp_func(X509_POLICY_NODE, (st), (cmp))
-#define sk_X509_POLICY_NODE_dup(st) SKM_sk_dup(X509_POLICY_NODE, st)
-#define sk_X509_POLICY_NODE_pop_free(st, free_func) SKM_sk_pop_free(X509_POLICY_NODE, (st), (free_func))
-#define sk_X509_POLICY_NODE_shift(st) SKM_sk_shift(X509_POLICY_NODE, (st))
-#define sk_X509_POLICY_NODE_pop(st) SKM_sk_pop(X509_POLICY_NODE, (st))
-#define sk_X509_POLICY_NODE_sort(st) SKM_sk_sort(X509_POLICY_NODE, (st))
-#define sk_X509_POLICY_NODE_is_sorted(st) SKM_sk_is_sorted(X509_POLICY_NODE, (st))
-
-#define sk_X509_POLICY_REF_new(st) SKM_sk_new(X509_POLICY_REF, (st))
-#define sk_X509_POLICY_REF_new_null() SKM_sk_new_null(X509_POLICY_REF)
-#define sk_X509_POLICY_REF_free(st) SKM_sk_free(X509_POLICY_REF, (st))
-#define sk_X509_POLICY_REF_num(st) SKM_sk_num(X509_POLICY_REF, (st))
-#define sk_X509_POLICY_REF_value(st, i) SKM_sk_value(X509_POLICY_REF, (st), (i))
-#define sk_X509_POLICY_REF_set(st, i, val) SKM_sk_set(X509_POLICY_REF, (st), (i), (val))
-#define sk_X509_POLICY_REF_zero(st) SKM_sk_zero(X509_POLICY_REF, (st))
-#define sk_X509_POLICY_REF_push(st, val) SKM_sk_push(X509_POLICY_REF, (st), (val))
-#define sk_X509_POLICY_REF_unshift(st, val) SKM_sk_unshift(X509_POLICY_REF, (st), (val))
-#define sk_X509_POLICY_REF_find(st, val) SKM_sk_find(X509_POLICY_REF, (st), (val))
-#define sk_X509_POLICY_REF_find_ex(st, val) SKM_sk_find_ex(X509_POLICY_REF, (st), (val))
-#define sk_X509_POLICY_REF_delete(st, i) SKM_sk_delete(X509_POLICY_REF, (st), (i))
-#define sk_X509_POLICY_REF_delete_ptr(st, ptr) SKM_sk_delete_ptr(X509_POLICY_REF, (st), (ptr))
-#define sk_X509_POLICY_REF_insert(st, val, i) SKM_sk_insert(X509_POLICY_REF, (st), (val), (i))
-#define sk_X509_POLICY_REF_set_cmp_func(st, cmp) SKM_sk_set_cmp_func(X509_POLICY_REF, (st), (cmp))
-#define sk_X509_POLICY_REF_dup(st) SKM_sk_dup(X509_POLICY_REF, st)
-#define sk_X509_POLICY_REF_pop_free(st, free_func) SKM_sk_pop_free(X509_POLICY_REF, (st), (free_func))
-#define sk_X509_POLICY_REF_shift(st) SKM_sk_shift(X509_POLICY_REF, (st))
-#define sk_X509_POLICY_REF_pop(st) SKM_sk_pop(X509_POLICY_REF, (st))
-#define sk_X509_POLICY_REF_sort(st) SKM_sk_sort(X509_POLICY_REF, (st))
-#define sk_X509_POLICY_REF_is_sorted(st) SKM_sk_is_sorted(X509_POLICY_REF, (st))
-
-#define sk_X509_PURPOSE_new(st) SKM_sk_new(X509_PURPOSE, (st))
-#define sk_X509_PURPOSE_new_null() SKM_sk_new_null(X509_PURPOSE)
-#define sk_X509_PURPOSE_free(st) SKM_sk_free(X509_PURPOSE, (st))
-#define sk_X509_PURPOSE_num(st) SKM_sk_num(X509_PURPOSE, (st))
-#define sk_X509_PURPOSE_value(st, i) SKM_sk_value(X509_PURPOSE, (st), (i))
-#define sk_X509_PURPOSE_set(st, i, val) SKM_sk_set(X509_PURPOSE, (st), (i), (val))
-#define sk_X509_PURPOSE_zero(st) SKM_sk_zero(X509_PURPOSE, (st))
-#define sk_X509_PURPOSE_push(st, val) SKM_sk_push(X509_PURPOSE, (st), (val))
-#define sk_X509_PURPOSE_unshift(st, val) SKM_sk_unshift(X509_PURPOSE, (st), (val))
-#define sk_X509_PURPOSE_find(st, val) SKM_sk_find(X509_PURPOSE, (st), (val))
-#define sk_X509_PURPOSE_find_ex(st, val) SKM_sk_find_ex(X509_PURPOSE, (st), (val))
-#define sk_X509_PURPOSE_delete(st, i) SKM_sk_delete(X509_PURPOSE, (st), (i))
-#define sk_X509_PURPOSE_delete_ptr(st, ptr) SKM_sk_delete_ptr(X509_PURPOSE, (st), (ptr))
-#define sk_X509_PURPOSE_insert(st, val, i) SKM_sk_insert(X509_PURPOSE, (st), (val), (i))
-#define sk_X509_PURPOSE_set_cmp_func(st, cmp) SKM_sk_set_cmp_func(X509_PURPOSE, (st), (cmp))
-#define sk_X509_PURPOSE_dup(st) SKM_sk_dup(X509_PURPOSE, st)
-#define sk_X509_PURPOSE_pop_free(st, free_func) SKM_sk_pop_free(X509_PURPOSE, (st), (free_func))
-#define sk_X509_PURPOSE_shift(st) SKM_sk_shift(X509_PURPOSE, (st))
-#define sk_X509_PURPOSE_pop(st) SKM_sk_pop(X509_PURPOSE, (st))
-#define sk_X509_PURPOSE_sort(st) SKM_sk_sort(X509_PURPOSE, (st))
-#define sk_X509_PURPOSE_is_sorted(st) SKM_sk_is_sorted(X509_PURPOSE, (st))
-
-#define sk_X509_REVOKED_new(st) SKM_sk_new(X509_REVOKED, (st))
-#define sk_X509_REVOKED_new_null() SKM_sk_new_null(X509_REVOKED)
-#define sk_X509_REVOKED_free(st) SKM_sk_free(X509_REVOKED, (st))
-#define sk_X509_REVOKED_num(st) SKM_sk_num(X509_REVOKED, (st))
-#define sk_X509_REVOKED_value(st, i) SKM_sk_value(X509_REVOKED, (st), (i))
-#define sk_X509_REVOKED_set(st, i, val) SKM_sk_set(X509_REVOKED, (st), (i), (val))
-#define sk_X509_REVOKED_zero(st) SKM_sk_zero(X509_REVOKED, (st))
-#define sk_X509_REVOKED_push(st, val) SKM_sk_push(X509_REVOKED, (st), (val))
-#define sk_X509_REVOKED_unshift(st, val) SKM_sk_unshift(X509_REVOKED, (st), (val))
-#define sk_X509_REVOKED_find(st, val) SKM_sk_find(X509_REVOKED, (st), (val))
-#define sk_X509_REVOKED_find_ex(st, val) SKM_sk_find_ex(X509_REVOKED, (st), (val))
-#define sk_X509_REVOKED_delete(st, i) SKM_sk_delete(X509_REVOKED, (st), (i))
-#define sk_X509_REVOKED_delete_ptr(st, ptr) SKM_sk_delete_ptr(X509_REVOKED, (st), (ptr))
-#define sk_X509_REVOKED_insert(st, val, i) SKM_sk_insert(X509_REVOKED, (st), (val), (i))
-#define sk_X509_REVOKED_set_cmp_func(st, cmp) SKM_sk_set_cmp_func(X509_REVOKED, (st), (cmp))
-#define sk_X509_REVOKED_dup(st) SKM_sk_dup(X509_REVOKED, st)
-#define sk_X509_REVOKED_pop_free(st, free_func) SKM_sk_pop_free(X509_REVOKED, (st), (free_func))
-#define sk_X509_REVOKED_shift(st) SKM_sk_shift(X509_REVOKED, (st))
-#define sk_X509_REVOKED_pop(st) SKM_sk_pop(X509_REVOKED, (st))
-#define sk_X509_REVOKED_sort(st) SKM_sk_sort(X509_REVOKED, (st))
-#define sk_X509_REVOKED_is_sorted(st) SKM_sk_is_sorted(X509_REVOKED, (st))
-
-#define sk_X509_TRUST_new(st) SKM_sk_new(X509_TRUST, (st))
-#define sk_X509_TRUST_new_null() SKM_sk_new_null(X509_TRUST)
-#define sk_X509_TRUST_free(st) SKM_sk_free(X509_TRUST, (st))
-#define sk_X509_TRUST_num(st) SKM_sk_num(X509_TRUST, (st))
-#define sk_X509_TRUST_value(st, i) SKM_sk_value(X509_TRUST, (st), (i))
-#define sk_X509_TRUST_set(st, i, val) SKM_sk_set(X509_TRUST, (st), (i), (val))
-#define sk_X509_TRUST_zero(st) SKM_sk_zero(X509_TRUST, (st))
-#define sk_X509_TRUST_push(st, val) SKM_sk_push(X509_TRUST, (st), (val))
-#define sk_X509_TRUST_unshift(st, val) SKM_sk_unshift(X509_TRUST, (st), (val))
-#define sk_X509_TRUST_find(st, val) SKM_sk_find(X509_TRUST, (st), (val))
-#define sk_X509_TRUST_find_ex(st, val) SKM_sk_find_ex(X509_TRUST, (st), (val))
-#define sk_X509_TRUST_delete(st, i) SKM_sk_delete(X509_TRUST, (st), (i))
-#define sk_X509_TRUST_delete_ptr(st, ptr) SKM_sk_delete_ptr(X509_TRUST, (st), (ptr))
-#define sk_X509_TRUST_insert(st, val, i) SKM_sk_insert(X509_TRUST, (st), (val), (i))
-#define sk_X509_TRUST_set_cmp_func(st, cmp) SKM_sk_set_cmp_func(X509_TRUST, (st), (cmp))
-#define sk_X509_TRUST_dup(st) SKM_sk_dup(X509_TRUST, st)
-#define sk_X509_TRUST_pop_free(st, free_func) SKM_sk_pop_free(X509_TRUST, (st), (free_func))
-#define sk_X509_TRUST_shift(st) SKM_sk_shift(X509_TRUST, (st))
-#define sk_X509_TRUST_pop(st) SKM_sk_pop(X509_TRUST, (st))
-#define sk_X509_TRUST_sort(st) SKM_sk_sort(X509_TRUST, (st))
-#define sk_X509_TRUST_is_sorted(st) SKM_sk_is_sorted(X509_TRUST, (st))
-
-#define sk_X509_VERIFY_PARAM_new(st) SKM_sk_new(X509_VERIFY_PARAM, (st))
-#define sk_X509_VERIFY_PARAM_new_null() SKM_sk_new_null(X509_VERIFY_PARAM)
-#define sk_X509_VERIFY_PARAM_free(st) SKM_sk_free(X509_VERIFY_PARAM, (st))
-#define sk_X509_VERIFY_PARAM_num(st) SKM_sk_num(X509_VERIFY_PARAM, (st))
-#define sk_X509_VERIFY_PARAM_value(st, i) SKM_sk_value(X509_VERIFY_PARAM, (st), (i))
-#define sk_X509_VERIFY_PARAM_set(st, i, val) SKM_sk_set(X509_VERIFY_PARAM, (st), (i), (val))
-#define sk_X509_VERIFY_PARAM_zero(st) SKM_sk_zero(X509_VERIFY_PARAM, (st))
-#define sk_X509_VERIFY_PARAM_push(st, val) SKM_sk_push(X509_VERIFY_PARAM, (st), (val))
-#define sk_X509_VERIFY_PARAM_unshift(st, val) SKM_sk_unshift(X509_VERIFY_PARAM, (st), (val))
-#define sk_X509_VERIFY_PARAM_find(st, val) SKM_sk_find(X509_VERIFY_PARAM, (st), (val))
-#define sk_X509_VERIFY_PARAM_find_ex(st, val) SKM_sk_find_ex(X509_VERIFY_PARAM, (st), (val))
-#define sk_X509_VERIFY_PARAM_delete(st, i) SKM_sk_delete(X509_VERIFY_PARAM, (st), (i))
-#define sk_X509_VERIFY_PARAM_delete_ptr(st, ptr) SKM_sk_delete_ptr(X509_VERIFY_PARAM, (st), (ptr))
-#define sk_X509_VERIFY_PARAM_insert(st, val, i) SKM_sk_insert(X509_VERIFY_PARAM, (st), (val), (i))
-#define sk_X509_VERIFY_PARAM_set_cmp_func(st, cmp) SKM_sk_set_cmp_func(X509_VERIFY_PARAM, (st), (cmp))
-#define sk_X509_VERIFY_PARAM_dup(st) SKM_sk_dup(X509_VERIFY_PARAM, st)
-#define sk_X509_VERIFY_PARAM_pop_free(st, free_func) SKM_sk_pop_free(X509_VERIFY_PARAM, (st), (free_func))
-#define sk_X509_VERIFY_PARAM_shift(st) SKM_sk_shift(X509_VERIFY_PARAM, (st))
-#define sk_X509_VERIFY_PARAM_pop(st) SKM_sk_pop(X509_VERIFY_PARAM, (st))
-#define sk_X509_VERIFY_PARAM_sort(st) SKM_sk_sort(X509_VERIFY_PARAM, (st))
-#define sk_X509_VERIFY_PARAM_is_sorted(st) SKM_sk_is_sorted(X509_VERIFY_PARAM, (st))
-
-#define d2i_ASN1_SET_OF_ACCESS_DESCRIPTION(st, pp, length, d2i_func, free_func, ex_tag, ex_class) \
-	SKM_ASN1_SET_OF_d2i(ACCESS_DESCRIPTION, (st), (pp), (length), (d2i_func), (free_func), (ex_tag), (ex_class)) 
-#define i2d_ASN1_SET_OF_ACCESS_DESCRIPTION(st, pp, i2d_func, ex_tag, ex_class, is_set) \
-	SKM_ASN1_SET_OF_i2d(ACCESS_DESCRIPTION, (st), (pp), (i2d_func), (ex_tag), (ex_class), (is_set))
-#define ASN1_seq_pack_ACCESS_DESCRIPTION(st, i2d_func, buf, len) \
-	SKM_ASN1_seq_pack(ACCESS_DESCRIPTION, (st), (i2d_func), (buf), (len))
-#define ASN1_seq_unpack_ACCESS_DESCRIPTION(buf, len, d2i_func, free_func) \
-	SKM_ASN1_seq_unpack(ACCESS_DESCRIPTION, (buf), (len), (d2i_func), (free_func))
-
-#define d2i_ASN1_SET_OF_ASN1_INTEGER(st, pp, length, d2i_func, free_func, ex_tag, ex_class) \
-	SKM_ASN1_SET_OF_d2i(ASN1_INTEGER, (st), (pp), (length), (d2i_func), (free_func), (ex_tag), (ex_class)) 
-#define i2d_ASN1_SET_OF_ASN1_INTEGER(st, pp, i2d_func, ex_tag, ex_class, is_set) \
-	SKM_ASN1_SET_OF_i2d(ASN1_INTEGER, (st), (pp), (i2d_func), (ex_tag), (ex_class), (is_set))
-#define ASN1_seq_pack_ASN1_INTEGER(st, i2d_func, buf, len) \
-	SKM_ASN1_seq_pack(ASN1_INTEGER, (st), (i2d_func), (buf), (len))
-#define ASN1_seq_unpack_ASN1_INTEGER(buf, len, d2i_func, free_func) \
-	SKM_ASN1_seq_unpack(ASN1_INTEGER, (buf), (len), (d2i_func), (free_func))
-
-#define d2i_ASN1_SET_OF_ASN1_OBJECT(st, pp, length, d2i_func, free_func, ex_tag, ex_class) \
-	SKM_ASN1_SET_OF_d2i(ASN1_OBJECT, (st), (pp), (length), (d2i_func), (free_func), (ex_tag), (ex_class)) 
-#define i2d_ASN1_SET_OF_ASN1_OBJECT(st, pp, i2d_func, ex_tag, ex_class, is_set) \
-	SKM_ASN1_SET_OF_i2d(ASN1_OBJECT, (st), (pp), (i2d_func), (ex_tag), (ex_class), (is_set))
-#define ASN1_seq_pack_ASN1_OBJECT(st, i2d_func, buf, len) \
-	SKM_ASN1_seq_pack(ASN1_OBJECT, (st), (i2d_func), (buf), (len))
-#define ASN1_seq_unpack_ASN1_OBJECT(buf, len, d2i_func, free_func) \
-	SKM_ASN1_seq_unpack(ASN1_OBJECT, (buf), (len), (d2i_func), (free_func))
-
-#define d2i_ASN1_SET_OF_ASN1_TYPE(st, pp, length, d2i_func, free_func, ex_tag, ex_class) \
-	SKM_ASN1_SET_OF_d2i(ASN1_TYPE, (st), (pp), (length), (d2i_func), (free_func), (ex_tag), (ex_class)) 
-#define i2d_ASN1_SET_OF_ASN1_TYPE(st, pp, i2d_func, ex_tag, ex_class, is_set) \
-	SKM_ASN1_SET_OF_i2d(ASN1_TYPE, (st), (pp), (i2d_func), (ex_tag), (ex_class), (is_set))
-#define ASN1_seq_pack_ASN1_TYPE(st, i2d_func, buf, len) \
-	SKM_ASN1_seq_pack(ASN1_TYPE, (st), (i2d_func), (buf), (len))
-#define ASN1_seq_unpack_ASN1_TYPE(buf, len, d2i_func, free_func) \
-	SKM_ASN1_seq_unpack(ASN1_TYPE, (buf), (len), (d2i_func), (free_func))
-
-#define d2i_ASN1_SET_OF_DIST_POINT(st, pp, length, d2i_func, free_func, ex_tag, ex_class) \
-	SKM_ASN1_SET_OF_d2i(DIST_POINT, (st), (pp), (length), (d2i_func), (free_func), (ex_tag), (ex_class)) 
-#define i2d_ASN1_SET_OF_DIST_POINT(st, pp, i2d_func, ex_tag, ex_class, is_set) \
-	SKM_ASN1_SET_OF_i2d(DIST_POINT, (st), (pp), (i2d_func), (ex_tag), (ex_class), (is_set))
-#define ASN1_seq_pack_DIST_POINT(st, i2d_func, buf, len) \
-	SKM_ASN1_seq_pack(DIST_POINT, (st), (i2d_func), (buf), (len))
-#define ASN1_seq_unpack_DIST_POINT(buf, len, d2i_func, free_func) \
-	SKM_ASN1_seq_unpack(DIST_POINT, (buf), (len), (d2i_func), (free_func))
-
-#define d2i_ASN1_SET_OF_GENERAL_NAME(st, pp, length, d2i_func, free_func, ex_tag, ex_class) \
-	SKM_ASN1_SET_OF_d2i(GENERAL_NAME, (st), (pp), (length), (d2i_func), (free_func), (ex_tag), (ex_class)) 
-#define i2d_ASN1_SET_OF_GENERAL_NAME(st, pp, i2d_func, ex_tag, ex_class, is_set) \
-	SKM_ASN1_SET_OF_i2d(GENERAL_NAME, (st), (pp), (i2d_func), (ex_tag), (ex_class), (is_set))
-#define ASN1_seq_pack_GENERAL_NAME(st, i2d_func, buf, len) \
-	SKM_ASN1_seq_pack(GENERAL_NAME, (st), (i2d_func), (buf), (len))
-#define ASN1_seq_unpack_GENERAL_NAME(buf, len, d2i_func, free_func) \
-	SKM_ASN1_seq_unpack(GENERAL_NAME, (buf), (len), (d2i_func), (free_func))
-
-#define d2i_ASN1_SET_OF_OCSP_ONEREQ(st, pp, length, d2i_func, free_func, ex_tag, ex_class) \
-	SKM_ASN1_SET_OF_d2i(OCSP_ONEREQ, (st), (pp), (length), (d2i_func), (free_func), (ex_tag), (ex_class)) 
-#define i2d_ASN1_SET_OF_OCSP_ONEREQ(st, pp, i2d_func, ex_tag, ex_class, is_set) \
-	SKM_ASN1_SET_OF_i2d(OCSP_ONEREQ, (st), (pp), (i2d_func), (ex_tag), (ex_class), (is_set))
-#define ASN1_seq_pack_OCSP_ONEREQ(st, i2d_func, buf, len) \
-	SKM_ASN1_seq_pack(OCSP_ONEREQ, (st), (i2d_func), (buf), (len))
-#define ASN1_seq_unpack_OCSP_ONEREQ(buf, len, d2i_func, free_func) \
-	SKM_ASN1_seq_unpack(OCSP_ONEREQ, (buf), (len), (d2i_func), (free_func))
-
-#define d2i_ASN1_SET_OF_OCSP_SINGLERESP(st, pp, length, d2i_func, free_func, ex_tag, ex_class) \
-	SKM_ASN1_SET_OF_d2i(OCSP_SINGLERESP, (st), (pp), (length), (d2i_func), (free_func), (ex_tag), (ex_class)) 
-#define i2d_ASN1_SET_OF_OCSP_SINGLERESP(st, pp, i2d_func, ex_tag, ex_class, is_set) \
-	SKM_ASN1_SET_OF_i2d(OCSP_SINGLERESP, (st), (pp), (i2d_func), (ex_tag), (ex_class), (is_set))
-#define ASN1_seq_pack_OCSP_SINGLERESP(st, i2d_func, buf, len) \
-	SKM_ASN1_seq_pack(OCSP_SINGLERESP, (st), (i2d_func), (buf), (len))
-#define ASN1_seq_unpack_OCSP_SINGLERESP(buf, len, d2i_func, free_func) \
-	SKM_ASN1_seq_unpack(OCSP_SINGLERESP, (buf), (len), (d2i_func), (free_func))
-
-#define d2i_ASN1_SET_OF_PKCS12_SAFEBAG(st, pp, length, d2i_func, free_func, ex_tag, ex_class) \
-	SKM_ASN1_SET_OF_d2i(PKCS12_SAFEBAG, (st), (pp), (length), (d2i_func), (free_func), (ex_tag), (ex_class)) 
-#define i2d_ASN1_SET_OF_PKCS12_SAFEBAG(st, pp, i2d_func, ex_tag, ex_class, is_set) \
-	SKM_ASN1_SET_OF_i2d(PKCS12_SAFEBAG, (st), (pp), (i2d_func), (ex_tag), (ex_class), (is_set))
-#define ASN1_seq_pack_PKCS12_SAFEBAG(st, i2d_func, buf, len) \
-	SKM_ASN1_seq_pack(PKCS12_SAFEBAG, (st), (i2d_func), (buf), (len))
-#define ASN1_seq_unpack_PKCS12_SAFEBAG(buf, len, d2i_func, free_func) \
-	SKM_ASN1_seq_unpack(PKCS12_SAFEBAG, (buf), (len), (d2i_func), (free_func))
-
-#define d2i_ASN1_SET_OF_PKCS7(st, pp, length, d2i_func, free_func, ex_tag, ex_class) \
-	SKM_ASN1_SET_OF_d2i(PKCS7, (st), (pp), (length), (d2i_func), (free_func), (ex_tag), (ex_class)) 
-#define i2d_ASN1_SET_OF_PKCS7(st, pp, i2d_func, ex_tag, ex_class, is_set) \
-	SKM_ASN1_SET_OF_i2d(PKCS7, (st), (pp), (i2d_func), (ex_tag), (ex_class), (is_set))
-#define ASN1_seq_pack_PKCS7(st, i2d_func, buf, len) \
-	SKM_ASN1_seq_pack(PKCS7, (st), (i2d_func), (buf), (len))
-#define ASN1_seq_unpack_PKCS7(buf, len, d2i_func, free_func) \
-	SKM_ASN1_seq_unpack(PKCS7, (buf), (len), (d2i_func), (free_func))
-
-#define d2i_ASN1_SET_OF_PKCS7_RECIP_INFO(st, pp, length, d2i_func, free_func, ex_tag, ex_class) \
-	SKM_ASN1_SET_OF_d2i(PKCS7_RECIP_INFO, (st), (pp), (length), (d2i_func), (free_func), (ex_tag), (ex_class)) 
-#define i2d_ASN1_SET_OF_PKCS7_RECIP_INFO(st, pp, i2d_func, ex_tag, ex_class, is_set) \
-	SKM_ASN1_SET_OF_i2d(PKCS7_RECIP_INFO, (st), (pp), (i2d_func), (ex_tag), (ex_class), (is_set))
-#define ASN1_seq_pack_PKCS7_RECIP_INFO(st, i2d_func, buf, len) \
-	SKM_ASN1_seq_pack(PKCS7_RECIP_INFO, (st), (i2d_func), (buf), (len))
-#define ASN1_seq_unpack_PKCS7_RECIP_INFO(buf, len, d2i_func, free_func) \
-	SKM_ASN1_seq_unpack(PKCS7_RECIP_INFO, (buf), (len), (d2i_func), (free_func))
-
-#define d2i_ASN1_SET_OF_PKCS7_SIGNER_INFO(st, pp, length, d2i_func, free_func, ex_tag, ex_class) \
-	SKM_ASN1_SET_OF_d2i(PKCS7_SIGNER_INFO, (st), (pp), (length), (d2i_func), (free_func), (ex_tag), (ex_class)) 
-#define i2d_ASN1_SET_OF_PKCS7_SIGNER_INFO(st, pp, i2d_func, ex_tag, ex_class, is_set) \
-	SKM_ASN1_SET_OF_i2d(PKCS7_SIGNER_INFO, (st), (pp), (i2d_func), (ex_tag), (ex_class), (is_set))
-#define ASN1_seq_pack_PKCS7_SIGNER_INFO(st, i2d_func, buf, len) \
-	SKM_ASN1_seq_pack(PKCS7_SIGNER_INFO, (st), (i2d_func), (buf), (len))
-#define ASN1_seq_unpack_PKCS7_SIGNER_INFO(buf, len, d2i_func, free_func) \
-	SKM_ASN1_seq_unpack(PKCS7_SIGNER_INFO, (buf), (len), (d2i_func), (free_func))
-
-#define d2i_ASN1_SET_OF_POLICYINFO(st, pp, length, d2i_func, free_func, ex_tag, ex_class) \
-	SKM_ASN1_SET_OF_d2i(POLICYINFO, (st), (pp), (length), (d2i_func), (free_func), (ex_tag), (ex_class)) 
-#define i2d_ASN1_SET_OF_POLICYINFO(st, pp, i2d_func, ex_tag, ex_class, is_set) \
-	SKM_ASN1_SET_OF_i2d(POLICYINFO, (st), (pp), (i2d_func), (ex_tag), (ex_class), (is_set))
-#define ASN1_seq_pack_POLICYINFO(st, i2d_func, buf, len) \
-	SKM_ASN1_seq_pack(POLICYINFO, (st), (i2d_func), (buf), (len))
-#define ASN1_seq_unpack_POLICYINFO(buf, len, d2i_func, free_func) \
-	SKM_ASN1_seq_unpack(POLICYINFO, (buf), (len), (d2i_func), (free_func))
-
-#define d2i_ASN1_SET_OF_POLICYQUALINFO(st, pp, length, d2i_func, free_func, ex_tag, ex_class) \
-	SKM_ASN1_SET_OF_d2i(POLICYQUALINFO, (st), (pp), (length), (d2i_func), (free_func), (ex_tag), (ex_class)) 
-#define i2d_ASN1_SET_OF_POLICYQUALINFO(st, pp, i2d_func, ex_tag, ex_class, is_set) \
-	SKM_ASN1_SET_OF_i2d(POLICYQUALINFO, (st), (pp), (i2d_func), (ex_tag), (ex_class), (is_set))
-#define ASN1_seq_pack_POLICYQUALINFO(st, i2d_func, buf, len) \
-	SKM_ASN1_seq_pack(POLICYQUALINFO, (st), (i2d_func), (buf), (len))
-#define ASN1_seq_unpack_POLICYQUALINFO(buf, len, d2i_func, free_func) \
-	SKM_ASN1_seq_unpack(POLICYQUALINFO, (buf), (len), (d2i_func), (free_func))
-
-#define d2i_ASN1_SET_OF_SXNETID(st, pp, length, d2i_func, free_func, ex_tag, ex_class) \
-	SKM_ASN1_SET_OF_d2i(SXNETID, (st), (pp), (length), (d2i_func), (free_func), (ex_tag), (ex_class)) 
-#define i2d_ASN1_SET_OF_SXNETID(st, pp, i2d_func, ex_tag, ex_class, is_set) \
-	SKM_ASN1_SET_OF_i2d(SXNETID, (st), (pp), (i2d_func), (ex_tag), (ex_class), (is_set))
-#define ASN1_seq_pack_SXNETID(st, i2d_func, buf, len) \
-	SKM_ASN1_seq_pack(SXNETID, (st), (i2d_func), (buf), (len))
-#define ASN1_seq_unpack_SXNETID(buf, len, d2i_func, free_func) \
-	SKM_ASN1_seq_unpack(SXNETID, (buf), (len), (d2i_func), (free_func))
-
-#define d2i_ASN1_SET_OF_X509(st, pp, length, d2i_func, free_func, ex_tag, ex_class) \
-	SKM_ASN1_SET_OF_d2i(X509, (st), (pp), (length), (d2i_func), (free_func), (ex_tag), (ex_class)) 
-#define i2d_ASN1_SET_OF_X509(st, pp, i2d_func, ex_tag, ex_class, is_set) \
-	SKM_ASN1_SET_OF_i2d(X509, (st), (pp), (i2d_func), (ex_tag), (ex_class), (is_set))
-#define ASN1_seq_pack_X509(st, i2d_func, buf, len) \
-	SKM_ASN1_seq_pack(X509, (st), (i2d_func), (buf), (len))
-#define ASN1_seq_unpack_X509(buf, len, d2i_func, free_func) \
-	SKM_ASN1_seq_unpack(X509, (buf), (len), (d2i_func), (free_func))
-
-#define d2i_ASN1_SET_OF_X509_ALGOR(st, pp, length, d2i_func, free_func, ex_tag, ex_class) \
-	SKM_ASN1_SET_OF_d2i(X509_ALGOR, (st), (pp), (length), (d2i_func), (free_func), (ex_tag), (ex_class)) 
-#define i2d_ASN1_SET_OF_X509_ALGOR(st, pp, i2d_func, ex_tag, ex_class, is_set) \
-	SKM_ASN1_SET_OF_i2d(X509_ALGOR, (st), (pp), (i2d_func), (ex_tag), (ex_class), (is_set))
-#define ASN1_seq_pack_X509_ALGOR(st, i2d_func, buf, len) \
-	SKM_ASN1_seq_pack(X509_ALGOR, (st), (i2d_func), (buf), (len))
-#define ASN1_seq_unpack_X509_ALGOR(buf, len, d2i_func, free_func) \
-	SKM_ASN1_seq_unpack(X509_ALGOR, (buf), (len), (d2i_func), (free_func))
-
-#define d2i_ASN1_SET_OF_X509_ATTRIBUTE(st, pp, length, d2i_func, free_func, ex_tag, ex_class) \
-	SKM_ASN1_SET_OF_d2i(X509_ATTRIBUTE, (st), (pp), (length), (d2i_func), (free_func), (ex_tag), (ex_class)) 
-#define i2d_ASN1_SET_OF_X509_ATTRIBUTE(st, pp, i2d_func, ex_tag, ex_class, is_set) \
-	SKM_ASN1_SET_OF_i2d(X509_ATTRIBUTE, (st), (pp), (i2d_func), (ex_tag), (ex_class), (is_set))
-#define ASN1_seq_pack_X509_ATTRIBUTE(st, i2d_func, buf, len) \
-	SKM_ASN1_seq_pack(X509_ATTRIBUTE, (st), (i2d_func), (buf), (len))
-#define ASN1_seq_unpack_X509_ATTRIBUTE(buf, len, d2i_func, free_func) \
-	SKM_ASN1_seq_unpack(X509_ATTRIBUTE, (buf), (len), (d2i_func), (free_func))
-
-#define d2i_ASN1_SET_OF_X509_CRL(st, pp, length, d2i_func, free_func, ex_tag, ex_class) \
-	SKM_ASN1_SET_OF_d2i(X509_CRL, (st), (pp), (length), (d2i_func), (free_func), (ex_tag), (ex_class)) 
-#define i2d_ASN1_SET_OF_X509_CRL(st, pp, i2d_func, ex_tag, ex_class, is_set) \
-	SKM_ASN1_SET_OF_i2d(X509_CRL, (st), (pp), (i2d_func), (ex_tag), (ex_class), (is_set))
-#define ASN1_seq_pack_X509_CRL(st, i2d_func, buf, len) \
-	SKM_ASN1_seq_pack(X509_CRL, (st), (i2d_func), (buf), (len))
-#define ASN1_seq_unpack_X509_CRL(buf, len, d2i_func, free_func) \
-	SKM_ASN1_seq_unpack(X509_CRL, (buf), (len), (d2i_func), (free_func))
-
-#define d2i_ASN1_SET_OF_X509_EXTENSION(st, pp, length, d2i_func, free_func, ex_tag, ex_class) \
-	SKM_ASN1_SET_OF_d2i(X509_EXTENSION, (st), (pp), (length), (d2i_func), (free_func), (ex_tag), (ex_class)) 
-#define i2d_ASN1_SET_OF_X509_EXTENSION(st, pp, i2d_func, ex_tag, ex_class, is_set) \
-	SKM_ASN1_SET_OF_i2d(X509_EXTENSION, (st), (pp), (i2d_func), (ex_tag), (ex_class), (is_set))
-#define ASN1_seq_pack_X509_EXTENSION(st, i2d_func, buf, len) \
-	SKM_ASN1_seq_pack(X509_EXTENSION, (st), (i2d_func), (buf), (len))
-#define ASN1_seq_unpack_X509_EXTENSION(buf, len, d2i_func, free_func) \
-	SKM_ASN1_seq_unpack(X509_EXTENSION, (buf), (len), (d2i_func), (free_func))
-
-#define d2i_ASN1_SET_OF_X509_NAME_ENTRY(st, pp, length, d2i_func, free_func, ex_tag, ex_class) \
-	SKM_ASN1_SET_OF_d2i(X509_NAME_ENTRY, (st), (pp), (length), (d2i_func), (free_func), (ex_tag), (ex_class)) 
-#define i2d_ASN1_SET_OF_X509_NAME_ENTRY(st, pp, i2d_func, ex_tag, ex_class, is_set) \
-	SKM_ASN1_SET_OF_i2d(X509_NAME_ENTRY, (st), (pp), (i2d_func), (ex_tag), (ex_class), (is_set))
-#define ASN1_seq_pack_X509_NAME_ENTRY(st, i2d_func, buf, len) \
-	SKM_ASN1_seq_pack(X509_NAME_ENTRY, (st), (i2d_func), (buf), (len))
-#define ASN1_seq_unpack_X509_NAME_ENTRY(buf, len, d2i_func, free_func) \
-	SKM_ASN1_seq_unpack(X509_NAME_ENTRY, (buf), (len), (d2i_func), (free_func))
-
-#define d2i_ASN1_SET_OF_X509_REVOKED(st, pp, length, d2i_func, free_func, ex_tag, ex_class) \
-	SKM_ASN1_SET_OF_d2i(X509_REVOKED, (st), (pp), (length), (d2i_func), (free_func), (ex_tag), (ex_class)) 
-#define i2d_ASN1_SET_OF_X509_REVOKED(st, pp, i2d_func, ex_tag, ex_class, is_set) \
-	SKM_ASN1_SET_OF_i2d(X509_REVOKED, (st), (pp), (i2d_func), (ex_tag), (ex_class), (is_set))
-#define ASN1_seq_pack_X509_REVOKED(st, i2d_func, buf, len) \
-	SKM_ASN1_seq_pack(X509_REVOKED, (st), (i2d_func), (buf), (len))
-#define ASN1_seq_unpack_X509_REVOKED(buf, len, d2i_func, free_func) \
-	SKM_ASN1_seq_unpack(X509_REVOKED, (buf), (len), (d2i_func), (free_func))
-
-#define PKCS12_decrypt_d2i_PKCS12_SAFEBAG(algor, d2i_func, free_func, pass, passlen, oct, seq) \
-	SKM_PKCS12_decrypt_d2i(PKCS12_SAFEBAG, (algor), (d2i_func), (free_func), (pass), (passlen), (oct), (seq))
-
-#define PKCS12_decrypt_d2i_PKCS7(algor, d2i_func, free_func, pass, passlen, oct, seq) \
-	SKM_PKCS12_decrypt_d2i(PKCS7, (algor), (d2i_func), (free_func), (pass), (passlen), (oct), (seq))
-/* End of util/mkstack.pl block, you may now edit :-) */
-
-#endif /* !defined HEADER_SAFESTACK_H */
diff --git a/crypto/openssl/crypto/stack/stack.c b/crypto/openssl/crypto/stack/stack.c
deleted file mode 100644
index 378bd7c7968c..000000000000
--- a/crypto/openssl/crypto/stack/stack.c
+++ /dev/null
@@ -1,341 +0,0 @@
-/* crypto/stack/stack.c */
-/* Copyright (C) 1995-1998 Eric Young (eay@cryptsoft.com)
- * All rights reserved.
- *
- * This package is an SSL implementation written
- * by Eric Young (eay@cryptsoft.com).
- * The implementation was written so as to conform with Netscapes SSL.
- * 
- * This library is free for commercial and non-commercial use as long as
- * the following conditions are aheared to.  The following conditions
- * apply to all code found in this distribution, be it the RC4, RSA,
- * lhash, DES, etc., code; not just the SSL code.  The SSL documentation
- * included with this distribution is covered by the same copyright terms
- * except that the holder is Tim Hudson (tjh@cryptsoft.com).
- * 
- * Copyright remains Eric Young's, and as such any Copyright notices in
- * the code are not to be removed.
- * If this package is used in a product, Eric Young should be given attribution
- * as the author of the parts of the library used.
- * This can be in the form of a textual message at program startup or
- * in documentation (online or textual) provided with the package.
- * 
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions
- * are met:
- * 1. Redistributions of source code must retain the copyright
- *    notice, this list of conditions and the following disclaimer.
- * 2. Redistributions in binary form must reproduce the above copyright
- *    notice, this list of conditions and the following disclaimer in the
- *    documentation and/or other materials provided with the distribution.
- * 3. All advertising materials mentioning features or use of this software
- *    must display the following acknowledgement:
- *    "This product includes cryptographic software written by
- *     Eric Young (eay@cryptsoft.com)"
- *    The word 'cryptographic' can be left out if the rouines from the library
- *    being used are not cryptographic related :-).
- * 4. If you include any Windows specific code (or a derivative thereof) from 
- *    the apps directory (application code) you must include an acknowledgement:
- *    "This product includes software written by Tim Hudson (tjh@cryptsoft.com)"
- * 
- * THIS SOFTWARE IS PROVIDED BY ERIC YOUNG ``AS IS'' AND
- * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
- * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
- * ARE DISCLAIMED.  IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE
- * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
- * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
- * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
- * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
- * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
- * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
- * SUCH DAMAGE.
- * 
- * The licence and distribution terms for any publically available version or
- * derivative of this code cannot be changed.  i.e. this code cannot simply be
- * copied and put under another distribution licence
- * [including the GNU Public Licence.]
- */
-
-/* Code for stacks
- * Author - Eric Young v 1.0
- * 1.2 eay 12-Mar-97 -	Modified sk_find so that it _DOES_ return the
- *			lowest index for the searched item.
- *
- * 1.1 eay - Take from netdb and added to SSLeay
- *
- * 1.0 eay - First version 29/07/92
- */
-#include <stdio.h>
-#include "cryptlib.h"
-#include <openssl/stack.h>
-#include <openssl/objects.h>
-
-#undef MIN_NODES
-#define MIN_NODES	4
-
-const char STACK_version[]="Stack" OPENSSL_VERSION_PTEXT;
-
-#include <errno.h>
-
-int (*sk_set_cmp_func(STACK *sk, int (*c)(const char * const *,const char * const *)))
-		(const char * const *, const char * const *)
-	{
-	int (*old)(const char * const *,const char * const *)=sk->comp;
-
-	if (sk->comp != c)
-		sk->sorted=0;
-	sk->comp=c;
-
-	return old;
-	}
-
-STACK *sk_dup(STACK *sk)
-	{
-	STACK *ret;
-	char **s;
-
-	if ((ret=sk_new(sk->comp)) == NULL) goto err;
-	s=(char **)OPENSSL_realloc((char *)ret->data,
-		(unsigned int)sizeof(char *)*sk->num_alloc);
-	if (s == NULL) goto err;
-	ret->data=s;
-
-	ret->num=sk->num;
-	memcpy(ret->data,sk->data,sizeof(char *)*sk->num);
-	ret->sorted=sk->sorted;
-	ret->num_alloc=sk->num_alloc;
-	ret->comp=sk->comp;
-	return(ret);
-err:
-	if(ret)
-		sk_free(ret);
-	return(NULL);
-	}
-
-STACK *sk_new_null(void)
-	{
-	return sk_new((int (*)(const char * const *, const char * const *))0);
-	}
-
-STACK *sk_new(int (*c)(const char * const *, const char * const *))
-	{
-	STACK *ret;
-	int i;
-
-	if ((ret=(STACK *)OPENSSL_malloc(sizeof(STACK))) == NULL)
-		goto err;
-	if ((ret->data=(char **)OPENSSL_malloc(sizeof(char *)*MIN_NODES)) == NULL)
-		goto err;
-	for (i=0; i<MIN_NODES; i++)
-		ret->data[i]=NULL;
-	ret->comp=c;
-	ret->num_alloc=MIN_NODES;
-	ret->num=0;
-	ret->sorted=0;
-	return(ret);
-err:
-	if(ret)
-		OPENSSL_free(ret);
-	return(NULL);
-	}
-
-int sk_insert(STACK *st, char *data, int loc)
-	{
-	char **s;
-
-	if(st == NULL) return 0;
-	if (st->num_alloc <= st->num+1)
-		{
-		s=(char **)OPENSSL_realloc((char *)st->data,
-			(unsigned int)sizeof(char *)*st->num_alloc*2);
-		if (s == NULL)
-			return(0);
-		st->data=s;
-		st->num_alloc*=2;
-		}
-	if ((loc >= (int)st->num) || (loc < 0))
-		st->data[st->num]=data;
-	else
-		{
-		int i;
-		char **f,**t;
-
-		f=(char **)st->data;
-		t=(char **)&(st->data[1]);
-		for (i=st->num; i>=loc; i--)
-			t[i]=f[i];
-			
-#ifdef undef /* no memmove on sunos :-( */
-		memmove( (char *)&(st->data[loc+1]),
-			(char *)&(st->data[loc]),
-			sizeof(char *)*(st->num-loc));
-#endif
-		st->data[loc]=data;
-		}
-	st->num++;
-	st->sorted=0;
-	return(st->num);
-	}
-
-char *sk_delete_ptr(STACK *st, char *p)
-	{
-	int i;
-
-	for (i=0; i<st->num; i++)
-		if (st->data[i] == p)
-			return(sk_delete(st,i));
-	return(NULL);
-	}
-
-char *sk_delete(STACK *st, int loc)
-	{
-	char *ret;
-	int i,j;
-
-	if(!st || (loc < 0) || (loc >= st->num)) return NULL;
-
-	ret=st->data[loc];
-	if (loc != st->num-1)
-		{
-		j=st->num-1;
-		for (i=loc; i<j; i++)
-			st->data[i]=st->data[i+1];
-		/* In theory memcpy is not safe for this
-		 * memcpy( &(st->data[loc]),
-		 *	&(st->data[loc+1]),
-		 *	sizeof(char *)*(st->num-loc-1));
-		 */
-		}
-	st->num--;
-	return(ret);
-	}
-
-static int internal_find(STACK *st, char *data, int ret_val_options)
-	{
-	char **r;
-	int i;
-	int (*comp_func)(const void *,const void *);
-	if(st == NULL) return -1;
-
-	if (st->comp == NULL)
-		{
-		for (i=0; i<st->num; i++)
-			if (st->data[i] == data)
-				return(i);
-		return(-1);
-		}
-	sk_sort(st);
-	if (data == NULL) return(-1);
-	/* This (and the "qsort" below) are the two places in OpenSSL
-	 * where we need to convert from our standard (type **,type **)
-	 * compare callback type to the (void *,void *) type required by
-	 * bsearch. However, the "data" it is being called(back) with are
-	 * not (type *) pointers, but the *pointers* to (type *) pointers,
-	 * so we get our extra level of pointer dereferencing that way. */
-	comp_func=(int (*)(const void *,const void *))(st->comp);
-	r=(char **)OBJ_bsearch_ex((char *)&data,(char *)st->data,
-		st->num,sizeof(char *),comp_func,ret_val_options);
-	if (r == NULL) return(-1);
-	return((int)(r-st->data));
-	}
-
-int sk_find(STACK *st, char *data)
-	{
-	return internal_find(st, data, OBJ_BSEARCH_FIRST_VALUE_ON_MATCH);
-	}
-int sk_find_ex(STACK *st, char *data)
-	{
-	return internal_find(st, data, OBJ_BSEARCH_VALUE_ON_NOMATCH);
-	}
-
-int sk_push(STACK *st, char *data)
-	{
-	return(sk_insert(st,data,st->num));
-	}
-
-int sk_unshift(STACK *st, char *data)
-	{
-	return(sk_insert(st,data,0));
-	}
-
-char *sk_shift(STACK *st)
-	{
-	if (st == NULL) return(NULL);
-	if (st->num <= 0) return(NULL);
-	return(sk_delete(st,0));
-	}
-
-char *sk_pop(STACK *st)
-	{
-	if (st == NULL) return(NULL);
-	if (st->num <= 0) return(NULL);
-	return(sk_delete(st,st->num-1));
-	}
-
-void sk_zero(STACK *st)
-	{
-	if (st == NULL) return;
-	if (st->num <= 0) return;
-	memset((char *)st->data,0,sizeof(st->data)*st->num);
-	st->num=0;
-	}
-
-void sk_pop_free(STACK *st, void (*func)(void *))
-	{
-	int i;
-
-	if (st == NULL) return;
-	for (i=0; i<st->num; i++)
-		if (st->data[i] != NULL)
-			func(st->data[i]);
-	sk_free(st);
-	}
-
-void sk_free(STACK *st)
-	{
-	if (st == NULL) return;
-	if (st->data != NULL) OPENSSL_free(st->data);
-	OPENSSL_free(st);
-	}
-
-int sk_num(const STACK *st)
-{
-	if(st == NULL) return -1;
-	return st->num;
-}
-
-char *sk_value(const STACK *st, int i)
-{
-	if(!st || (i < 0) || (i >= st->num)) return NULL;
-	return st->data[i];
-}
-
-char *sk_set(STACK *st, int i, char *value)
-{
-	if(!st || (i < 0) || (i >= st->num)) return NULL;
-	return (st->data[i] = value);
-}
-
-void sk_sort(STACK *st)
-	{
-	if (st && !st->sorted)
-		{
-		int (*comp_func)(const void *,const void *);
-
-		/* same comment as in sk_find ... previously st->comp was declared
-		 * as a (void*,void*) callback type, but this made the population
-		 * of the callback pointer illogical - our callbacks compare
-		 * type** with type**, so we leave the casting until absolutely
-		 * necessary (ie. "now"). */
-		comp_func=(int (*)(const void *,const void *))(st->comp);
-		qsort(st->data,st->num,sizeof(char *), comp_func);
-		st->sorted=1;
-		}
-	}
-
-int sk_is_sorted(const STACK *st)
-	{
-	if (!st)
-		return 1;
-	return st->sorted;
-	}
diff --git a/crypto/openssl/crypto/stack/stack.h b/crypto/openssl/crypto/stack/stack.h
deleted file mode 100644
index 5cbb116a8b2f..000000000000
--- a/crypto/openssl/crypto/stack/stack.h
+++ /dev/null
@@ -1,109 +0,0 @@
-/* crypto/stack/stack.h */
-/* Copyright (C) 1995-1998 Eric Young (eay@cryptsoft.com)
- * All rights reserved.
- *
- * This package is an SSL implementation written
- * by Eric Young (eay@cryptsoft.com).
- * The implementation was written so as to conform with Netscapes SSL.
- * 
- * This library is free for commercial and non-commercial use as long as
- * the following conditions are aheared to.  The following conditions
- * apply to all code found in this distribution, be it the RC4, RSA,
- * lhash, DES, etc., code; not just the SSL code.  The SSL documentation
- * included with this distribution is covered by the same copyright terms
- * except that the holder is Tim Hudson (tjh@cryptsoft.com).
- * 
- * Copyright remains Eric Young's, and as such any Copyright notices in
- * the code are not to be removed.
- * If this package is used in a product, Eric Young should be given attribution
- * as the author of the parts of the library used.
- * This can be in the form of a textual message at program startup or
- * in documentation (online or textual) provided with the package.
- * 
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions
- * are met:
- * 1. Redistributions of source code must retain the copyright
- *    notice, this list of conditions and the following disclaimer.
- * 2. Redistributions in binary form must reproduce the above copyright
- *    notice, this list of conditions and the following disclaimer in the
- *    documentation and/or other materials provided with the distribution.
- * 3. All advertising materials mentioning features or use of this software
- *    must display the following acknowledgement:
- *    "This product includes cryptographic software written by
- *     Eric Young (eay@cryptsoft.com)"
- *    The word 'cryptographic' can be left out if the rouines from the library
- *    being used are not cryptographic related :-).
- * 4. If you include any Windows specific code (or a derivative thereof) from 
- *    the apps directory (application code) you must include an acknowledgement:
- *    "This product includes software written by Tim Hudson (tjh@cryptsoft.com)"
- * 
- * THIS SOFTWARE IS PROVIDED BY ERIC YOUNG ``AS IS'' AND
- * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
- * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
- * ARE DISCLAIMED.  IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE
- * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
- * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
- * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
- * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
- * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
- * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
- * SUCH DAMAGE.
- * 
- * The licence and distribution terms for any publically available version or
- * derivative of this code cannot be changed.  i.e. this code cannot simply be
- * copied and put under another distribution licence
- * [including the GNU Public Licence.]
- */
-
-#ifndef HEADER_STACK_H
-#define HEADER_STACK_H
-
-#ifdef  __cplusplus
-extern "C" {
-#endif
-
-typedef struct stack_st
-	{
-	int num;
-	char **data;
-	int sorted;
-
-	int num_alloc;
-	int (*comp)(const char * const *, const char * const *);
-	} STACK;
-
-#define M_sk_num(sk)		((sk) ? (sk)->num:-1)
-#define M_sk_value(sk,n)	((sk) ? (sk)->data[n] : NULL)
-
-int sk_num(const STACK *);
-char *sk_value(const STACK *, int);
-
-char *sk_set(STACK *, int, char *);
-
-STACK *sk_new(int (*cmp)(const char * const *, const char * const *));
-STACK *sk_new_null(void);
-void sk_free(STACK *);
-void sk_pop_free(STACK *st, void (*func)(void *));
-int sk_insert(STACK *sk,char *data,int where);
-char *sk_delete(STACK *st,int loc);
-char *sk_delete_ptr(STACK *st, char *p);
-int sk_find(STACK *st,char *data);
-int sk_find_ex(STACK *st,char *data);
-int sk_push(STACK *st,char *data);
-int sk_unshift(STACK *st,char *data);
-char *sk_shift(STACK *st);
-char *sk_pop(STACK *st);
-void sk_zero(STACK *st);
-int (*sk_set_cmp_func(STACK *sk, int (*c)(const char * const *,
-			const char * const *)))
-			(const char * const *, const char * const *);
-STACK *sk_dup(STACK *st);
-void sk_sort(STACK *st);
-int sk_is_sorted(const STACK *st);
-
-#ifdef  __cplusplus
-}
-#endif
-
-#endif
diff --git a/crypto/openssl/crypto/store/Makefile b/crypto/openssl/crypto/store/Makefile
deleted file mode 100644
index 0dcfd7857a37..000000000000
--- a/crypto/openssl/crypto/store/Makefile
+++ /dev/null
@@ -1,112 +0,0 @@
-#
-# OpenSSL/crypto/store/Makefile
-#
-
-DIR=	store
-TOP=	../..
-CC=	cc
-INCLUDES= -I.. -I$(TOP) -I../../include
-CFLAG=-g
-MAKEFILE=	Makefile
-AR=		ar r
-
-CFLAGS= $(INCLUDES) $(CFLAG)
-
-GENERAL=Makefile
-#TEST= storetest.c
-TEST=
-APPS=
-
-LIB=$(TOP)/libcrypto.a
-LIBSRC= str_err.c str_lib.c str_meth.c str_mem.c
-LIBOBJ= str_err.o str_lib.o str_meth.o str_mem.o
-
-SRC= $(LIBSRC)
-
-#EXHEADER= store.h str_compat.h
-EXHEADER= store.h
-HEADER=	$(EXHEADER) str_locl.h
-
-ALL=    $(GENERAL) $(SRC) $(HEADER)
-
-top:
-	(cd ../..; $(MAKE) DIRS=crypto SDIRS=$(DIR) sub_all)
-
-all:	lib
-
-lib:	$(LIBOBJ)
-	$(AR) $(LIB) $(LIBOBJ)
-	$(RANLIB) $(LIB) || echo Never mind.
-	@touch lib
-
-files:
-	$(PERL) $(TOP)/util/files.pl Makefile >> $(TOP)/MINFO
-
-links:
-	@$(PERL) $(TOP)/util/mklink.pl ../../include/openssl $(EXHEADER)
-	@$(PERL) $(TOP)/util/mklink.pl ../../test $(TEST)
-	@$(PERL) $(TOP)/util/mklink.pl ../../apps $(APPS)
-
-install:
-	@[ -n "$(INSTALLTOP)" ] # should be set by top Makefile...
-	@headerlist="$(EXHEADER)"; for i in $$headerlist; \
-	do  \
-	(cp $$i $(INSTALL_PREFIX)$(INSTALLTOP)/include/openssl/$$i; \
-	chmod 644 $(INSTALL_PREFIX)$(INSTALLTOP)/include/openssl/$$i ); \
-	done;
-
-tags:
-	ctags $(SRC)
-
-tests:
-
-lint:
-	lint -DLINT $(INCLUDES) $(SRC)>fluff
-
-depend:
-	@[ -n "$(MAKEDEPEND)" ] # should be set by upper Makefile...
-	$(MAKEDEPEND) -- $(CFLAG) $(INCLUDES) $(DEPFLAG) -- $(PROGS) $(LIBSRC)
-
-dclean:
-	$(PERL) -pe 'if (/^# DO NOT DELETE THIS LINE/) {print; exit(0);}' $(MAKEFILE) >Makefile.new
-	mv -f Makefile.new $(MAKEFILE)
-
-clean:
-	rm -f *.o */*.o *.obj lib tags core .pure .nfs* *.old *.bak fluff
-
-# DO NOT DELETE THIS LINE -- make depend depends on it.
-
-str_err.o: ../../include/openssl/bio.h ../../include/openssl/crypto.h
-str_err.o: ../../include/openssl/e_os2.h ../../include/openssl/err.h
-str_err.o: ../../include/openssl/lhash.h ../../include/openssl/opensslconf.h
-str_err.o: ../../include/openssl/opensslv.h ../../include/openssl/ossl_typ.h
-str_err.o: ../../include/openssl/safestack.h ../../include/openssl/stack.h
-str_err.o: ../../include/openssl/store.h ../../include/openssl/symhacks.h
-str_err.o: str_err.c
-str_lib.o: ../../include/openssl/asn1.h ../../include/openssl/bio.h
-str_lib.o: ../../include/openssl/bn.h ../../include/openssl/buffer.h
-str_lib.o: ../../include/openssl/crypto.h ../../include/openssl/e_os2.h
-str_lib.o: ../../include/openssl/ec.h ../../include/openssl/ecdh.h
-str_lib.o: ../../include/openssl/ecdsa.h ../../include/openssl/engine.h
-str_lib.o: ../../include/openssl/err.h ../../include/openssl/evp.h
-str_lib.o: ../../include/openssl/lhash.h ../../include/openssl/obj_mac.h
-str_lib.o: ../../include/openssl/objects.h ../../include/openssl/opensslconf.h
-str_lib.o: ../../include/openssl/opensslv.h ../../include/openssl/ossl_typ.h
-str_lib.o: ../../include/openssl/pkcs7.h ../../include/openssl/safestack.h
-str_lib.o: ../../include/openssl/sha.h ../../include/openssl/stack.h
-str_lib.o: ../../include/openssl/store.h ../../include/openssl/symhacks.h
-str_lib.o: ../../include/openssl/x509.h ../../include/openssl/x509_vfy.h
-str_lib.o: str_lib.c str_locl.h
-str_mem.o: ../../include/openssl/bio.h ../../include/openssl/crypto.h
-str_mem.o: ../../include/openssl/e_os2.h ../../include/openssl/err.h
-str_mem.o: ../../include/openssl/lhash.h ../../include/openssl/opensslconf.h
-str_mem.o: ../../include/openssl/opensslv.h ../../include/openssl/ossl_typ.h
-str_mem.o: ../../include/openssl/safestack.h ../../include/openssl/stack.h
-str_mem.o: ../../include/openssl/store.h ../../include/openssl/symhacks.h
-str_mem.o: str_locl.h str_mem.c
-str_meth.o: ../../include/openssl/buffer.h ../../include/openssl/crypto.h
-str_meth.o: ../../include/openssl/e_os2.h ../../include/openssl/opensslconf.h
-str_meth.o: ../../include/openssl/opensslv.h ../../include/openssl/ossl_typ.h
-str_meth.o: ../../include/openssl/safestack.h ../../include/openssl/stack.h
-str_meth.o: ../../include/openssl/store.h ../../include/openssl/symhacks.h
-str_meth.o: str_locl.h str_meth.c
diff --git a/crypto/openssl/crypto/store/README b/crypto/openssl/crypto/store/README
deleted file mode 100644
index 966168f6a5a8..000000000000
--- a/crypto/openssl/crypto/store/README
+++ /dev/null
@@ -1,95 +0,0 @@
-The STORE type
-==============
-
-A STORE, as defined in this code section, is really a rather simple
-thing which stores objects and per-object associations to a number
-of attributes.  What attributes are supported entirely depends on
-the particular implementation of a STORE.  It has some support for
-generation of certain objects (for example, keys and CRLs).
-
-
-Supported object types
-----------------------
-
-For now, the objects that are supported are the following:
-
-X.509 certificate
-X.509 CRL
-private key
-public key
-number
-arbitrary (application) data
-
-The intention is that a STORE should be able to store everything
-needed by an application that wants a cert/key store, as well as
-the data a CA might need to store (this includes the serial number
-counter, which explains the support for numbers).
-
-
-Supported attribute types
--------------------------
-
-For now, the following attributes are supported:
-
-Friendly Name		- the value is a normal C string
-Key ID			- the value is a 160 bit SHA1 hash
-Issuer Key ID		- the value is a 160 bit SHA1 hash
-Subject Key ID		- the value is a 160 bit SHA1 hash
-Issuer/Serial Hash	- the value is a 160 bit SHA1 hash
-Issuer			- the value is a X509_NAME
-Serial			- the value is a BIGNUM
-Subject			- the value is a X509_NAME
-Certificate Hash	- the value is a 160 bit SHA1 hash
-Email			- the value is a normal C string
-Filename		- the value is a normal C string
-
-It is expected that these attributes should be enough to support
-the need from most, if not all, current applications.  Applications
-that need to do certificate verification would typically use Subject
-Key ID, Issuer/Serial Hash or Subject to look up issuer certificates.
-S/MIME applications would typically use Email to look up recipient
-and signer certificates.
-
-There's added support for combined sets of attributes to search for,
-with the special OR attribute.
-
-
-Supported basic functionality
------------------------------
-
-The functions that are supported through the STORE type are these:
-
-generate_object		- for example to generate keys and CRLs
-get_object		- to look up one object
-			  NOTE: this function is really rather
-			  redundant and probably of lesser usage
-			  than the list functions
-store_object		- store an object and the attributes
-			  associated with it
-modify_object		- modify the attributes associated with
-			  a specific object
-revoke_object		- revoke an object
-			  NOTE: this only marks an object as
-			  invalid, it doesn't remove the object
-			  from the database
-delete_object		- remove an object from the database
-list_object		- list objects associated with a given
-			  set of attributes
-			  NOTE: this is really four functions:
-			  list_start, list_next, list_end and
-			  list_endp
-update_store		- update the internal data of the store
-lock_store		- lock the store
-unlock_store		- unlock the store
-
-The list functions need some extra explanation: list_start is
-used to set up a lookup.  That's where the attributes to use in
-the search are set up.  It returns a search context.  list_next
-returns the next object searched for.  list_end closes the search.
-list_endp is used to check if we have reached the end.
-
-A few words on the store functions as well: update_store is
-typically used by a CA application to update the internal
-structure of a database.  This may for example involve automatic
-removal of expired certificates.  lock_store and unlock_store
-are used for locking a store to allow exclusive writes.
diff --git a/crypto/openssl/crypto/store/store.h b/crypto/openssl/crypto/store/store.h
deleted file mode 100644
index 64583377a94a..000000000000
--- a/crypto/openssl/crypto/store/store.h
+++ /dev/null
@@ -1,554 +0,0 @@
-/* crypto/store/store.h -*- mode:C; c-file-style: "eay" -*- */
-/* Written by Richard Levitte (richard@levitte.org) for the OpenSSL
- * project 2003.
- */
-/* ====================================================================
- * Copyright (c) 2003 The OpenSSL Project.  All rights reserved.
- *
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions
- * are met:
- *
- * 1. Redistributions of source code must retain the above copyright
- *    notice, this list of conditions and the following disclaimer. 
- *
- * 2. Redistributions in binary form must reproduce the above copyright
- *    notice, this list of conditions and the following disclaimer in
- *    the documentation and/or other materials provided with the
- *    distribution.
- *
- * 3. All advertising materials mentioning features or use of this
- *    software must display the following acknowledgment:
- *    "This product includes software developed by the OpenSSL Project
- *    for use in the OpenSSL Toolkit. (http://www.openssl.org/)"
- *
- * 4. The names "OpenSSL Toolkit" and "OpenSSL Project" must not be used to
- *    endorse or promote products derived from this software without
- *    prior written permission. For written permission, please contact
- *    openssl-core@openssl.org.
- *
- * 5. Products derived from this software may not be called "OpenSSL"
- *    nor may "OpenSSL" appear in their names without prior written
- *    permission of the OpenSSL Project.
- *
- * 6. Redistributions of any form whatsoever must retain the following
- *    acknowledgment:
- *    "This product includes software developed by the OpenSSL Project
- *    for use in the OpenSSL Toolkit (http://www.openssl.org/)"
- *
- * THIS SOFTWARE IS PROVIDED BY THE OpenSSL PROJECT ``AS IS'' AND ANY
- * EXPRESSED OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
- * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR
- * PURPOSE ARE DISCLAIMED.  IN NO EVENT SHALL THE OpenSSL PROJECT OR
- * ITS CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
- * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
- * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
- * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
- * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
- * STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
- * ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED
- * OF THE POSSIBILITY OF SUCH DAMAGE.
- * ====================================================================
- *
- * This product includes cryptographic software written by Eric Young
- * (eay@cryptsoft.com).  This product includes software written by Tim
- * Hudson (tjh@cryptsoft.com).
- *
- */
-
-#ifndef HEADER_STORE_H
-#define HEADER_STORE_H
-
-#include <openssl/ossl_typ.h>
-#ifndef OPENSSL_NO_DEPRECATED
-#include <openssl/evp.h>
-#include <openssl/bn.h>
-#include <openssl/x509.h>
-#endif
-
-#ifdef  __cplusplus
-extern "C" {
-#endif
-
-/* Already defined in ossl_typ.h */
-/* typedef struct store_st STORE; */
-/* typedef struct store_method_st STORE_METHOD; */
-
-
-/* All the following functions return 0, a negative number or NULL on error.
-   When everything is fine, they return a positive value or a non-NULL
-   pointer, all depending on their purpose. */
-
-/* Creators and destructor.   */
-STORE *STORE_new_method(const STORE_METHOD *method);
-STORE *STORE_new_engine(ENGINE *engine);
-void STORE_free(STORE *ui);
-
-
-/* Give a user interface parametrised control commands.  This can be used to
-   send down an integer, a data pointer or a function pointer, as well as
-   be used to get information from a STORE. */
-int STORE_ctrl(STORE *store, int cmd, long i, void *p, void (*f)(void));
-
-/* A control to set the directory with keys and certificates.  Used by the
-   built-in directory level method. */
-#define STORE_CTRL_SET_DIRECTORY	0x0001
-/* A control to set a file to load.  Used by the built-in file level method. */
-#define STORE_CTRL_SET_FILE		0x0002
-/* A control to set a configuration file to load.  Can be used by any method
-   that wishes to load a configuration file. */
-#define STORE_CTRL_SET_CONF_FILE	0x0003
-/* A control to set a the section of the loaded configuration file.  Can be
-   used by any method that wishes to load a configuration file. */
-#define STORE_CTRL_SET_CONF_SECTION	0x0004
-
-
-/* Some methods may use extra data */
-#define STORE_set_app_data(s,arg)	STORE_set_ex_data(s,0,arg)
-#define STORE_get_app_data(s)		STORE_get_ex_data(s,0)
-int STORE_get_ex_new_index(long argl, void *argp, CRYPTO_EX_new *new_func,
-	CRYPTO_EX_dup *dup_func, CRYPTO_EX_free *free_func);
-int STORE_set_ex_data(STORE *r,int idx,void *arg);
-void *STORE_get_ex_data(STORE *r, int idx);
-
-/* Use specific methods instead of the built-in one */
-const STORE_METHOD *STORE_get_method(STORE *store);
-const STORE_METHOD *STORE_set_method(STORE *store, const STORE_METHOD *meth);
-
-/* The standard OpenSSL methods. */
-/* This is the in-memory method.  It does everything except revoking and updating,
-   and is of course volatile.  It's used by other methods that have an in-memory
-   cache. */
-const STORE_METHOD *STORE_Memory(void);
-#if 0 /* Not yet implemented */
-/* This is the directory store.  It does everything except revoking and updating,
-   and uses STORE_Memory() to cache things in memory. */
-const STORE_METHOD *STORE_Directory(void);
-/* This is the file store.  It does everything except revoking and updating,
-   and uses STORE_Memory() to cache things in memory.  Certificates are added
-   to it with the store operation, and it will only get cached certificates. */
-const STORE_METHOD *STORE_File(void);
-#endif
-
-/* Store functions take a type code for the type of data they should store
-   or fetch */
-typedef enum STORE_object_types
-	{
-	STORE_OBJECT_TYPE_X509_CERTIFICATE=	0x01, /* X509 * */
-	STORE_OBJECT_TYPE_X509_CRL=		0x02, /* X509_CRL * */
-	STORE_OBJECT_TYPE_PRIVATE_KEY=		0x03, /* EVP_PKEY * */
-	STORE_OBJECT_TYPE_PUBLIC_KEY=		0x04, /* EVP_PKEY * */
-	STORE_OBJECT_TYPE_NUMBER=		0x05, /* BIGNUM * */
-	STORE_OBJECT_TYPE_ARBITRARY=		0x06, /* BUF_MEM * */
-	STORE_OBJECT_TYPE_NUM=			0x06  /* The amount of known
-							 object types */
-	} STORE_OBJECT_TYPES;
-/* List of text strings corresponding to the object types. */
-extern const char * const STORE_object_type_string[STORE_OBJECT_TYPE_NUM+1];
-
-/* Some store functions take a parameter list.  Those parameters come with
-   one of the following codes. The comments following the codes below indicate
-   what type the value should be a pointer to. */
-typedef enum STORE_params
-	{
-	STORE_PARAM_EVP_TYPE=			0x01, /* int */
-	STORE_PARAM_BITS=			0x02, /* size_t */
-	STORE_PARAM_KEY_PARAMETERS=		0x03, /* ??? */
-	STORE_PARAM_KEY_NO_PARAMETERS=		0x04, /* N/A */
-	STORE_PARAM_AUTH_PASSPHRASE=		0x05, /* char * */
-	STORE_PARAM_AUTH_KRB5_TICKET=		0x06, /* void * */
-	STORE_PARAM_TYPE_NUM=			0x06  /* The amount of known
-							 parameter types */
-	} STORE_PARAM_TYPES;
-/* Parameter value sizes.  -1 means unknown, anything else is the required size. */
-extern const int STORE_param_sizes[STORE_PARAM_TYPE_NUM+1];
-
-/* Store functions take attribute lists.  Those attributes come with codes.
-   The comments following the codes below indicate what type the value should
-   be a pointer to. */
-typedef enum STORE_attribs
-	{
-	STORE_ATTR_END=				0x00,
-	STORE_ATTR_FRIENDLYNAME=		0x01, /* C string */
-	STORE_ATTR_KEYID=			0x02, /* 160 bit string (SHA1) */
-	STORE_ATTR_ISSUERKEYID=			0x03, /* 160 bit string (SHA1) */
-	STORE_ATTR_SUBJECTKEYID=		0x04, /* 160 bit string (SHA1) */
-	STORE_ATTR_ISSUERSERIALHASH=		0x05, /* 160 bit string (SHA1) */
-	STORE_ATTR_ISSUER=			0x06, /* X509_NAME * */
-	STORE_ATTR_SERIAL=			0x07, /* BIGNUM * */
-	STORE_ATTR_SUBJECT=			0x08, /* X509_NAME * */
-	STORE_ATTR_CERTHASH=			0x09, /* 160 bit string (SHA1) */
-	STORE_ATTR_EMAIL=			0x0a, /* C string */
-	STORE_ATTR_FILENAME=			0x0b, /* C string */
-	STORE_ATTR_TYPE_NUM=			0x0b, /* The amount of known
-							 attribute types */
-	STORE_ATTR_OR=				0xff  /* This is a special
-							 separator, which
-							 expresses the OR
-							 operation.  */
-	} STORE_ATTR_TYPES;
-/* Attribute value sizes.  -1 means unknown, anything else is the required size. */
-extern const int STORE_attr_sizes[STORE_ATTR_TYPE_NUM+1];
-
-typedef enum STORE_certificate_status
-	{
-	STORE_X509_VALID=			0x00,
-	STORE_X509_EXPIRED=			0x01,
-	STORE_X509_SUSPENDED=			0x02,
-	STORE_X509_REVOKED=			0x03
-	} STORE_CERTIFICATE_STATUS;
-
-/* Engine store functions will return a structure that contains all the necessary
- * information, including revokation status for certificates.  This is really not
- * needed for application authors, as the ENGINE framework functions will extract
- * the OpenSSL-specific information when at all possible.  However, for engine
- * authors, it's crucial to know this structure.  */
-typedef struct STORE_OBJECT_st
-	{
-	STORE_OBJECT_TYPES type;
-	union
-		{
-		struct
-			{
-			STORE_CERTIFICATE_STATUS status;
-			X509 *certificate;
-			} x509;
-		X509_CRL *crl;
-		EVP_PKEY *key;
-		BIGNUM *number;
-		BUF_MEM *arbitrary;
-		} data;
-	} STORE_OBJECT;
-DECLARE_STACK_OF(STORE_OBJECT)
-STORE_OBJECT *STORE_OBJECT_new(void);
-void STORE_OBJECT_free(STORE_OBJECT *data);
-
-
-
-/* The following functions handle the storage. They return 0, a negative number
-   or NULL on error, anything else on success. */
-X509 *STORE_get_certificate(STORE *e, OPENSSL_ITEM attributes[],
-	OPENSSL_ITEM parameters[]);
-int STORE_store_certificate(STORE *e, X509 *data, OPENSSL_ITEM attributes[],
-	OPENSSL_ITEM parameters[]);
-int STORE_modify_certificate(STORE *e, OPENSSL_ITEM search_attributes[],
-	OPENSSL_ITEM add_attributes[], OPENSSL_ITEM modify_attributes[],
-	OPENSSL_ITEM delete_attributes[], OPENSSL_ITEM parameters[]);
-int STORE_revoke_certificate(STORE *e, OPENSSL_ITEM attributes[],
-	OPENSSL_ITEM parameters[]);
-int STORE_delete_certificate(STORE *e, OPENSSL_ITEM attributes[],
-	OPENSSL_ITEM parameters[]);
-void *STORE_list_certificate_start(STORE *e, OPENSSL_ITEM attributes[],
-	OPENSSL_ITEM parameters[]);
-X509 *STORE_list_certificate_next(STORE *e, void *handle);
-int STORE_list_certificate_end(STORE *e, void *handle);
-int STORE_list_certificate_endp(STORE *e, void *handle);
-EVP_PKEY *STORE_generate_key(STORE *e, OPENSSL_ITEM attributes[],
-	OPENSSL_ITEM parameters[]);
-EVP_PKEY *STORE_get_private_key(STORE *e, OPENSSL_ITEM attributes[],
-	OPENSSL_ITEM parameters[]);
-int STORE_store_private_key(STORE *e, EVP_PKEY *data,
-	OPENSSL_ITEM attributes[], OPENSSL_ITEM parameters[]);
-int STORE_modify_private_key(STORE *e, OPENSSL_ITEM search_attributes[],
-	OPENSSL_ITEM add_sttributes[], OPENSSL_ITEM modify_attributes[],
-	OPENSSL_ITEM delete_attributes[], OPENSSL_ITEM parameters[]);
-int STORE_revoke_private_key(STORE *e, OPENSSL_ITEM attributes[],
-	OPENSSL_ITEM parameters[]);
-int STORE_delete_private_key(STORE *e, OPENSSL_ITEM attributes[],
-	OPENSSL_ITEM parameters[]);
-void *STORE_list_private_key_start(STORE *e, OPENSSL_ITEM attributes[],
-	OPENSSL_ITEM parameters[]);
-EVP_PKEY *STORE_list_private_key_next(STORE *e, void *handle);
-int STORE_list_private_key_end(STORE *e, void *handle);
-int STORE_list_private_key_endp(STORE *e, void *handle);
-EVP_PKEY *STORE_get_public_key(STORE *e, OPENSSL_ITEM attributes[],
-	OPENSSL_ITEM parameters[]);
-int STORE_store_public_key(STORE *e, EVP_PKEY *data, OPENSSL_ITEM attributes[],
-	OPENSSL_ITEM parameters[]);
-int STORE_modify_public_key(STORE *e, OPENSSL_ITEM search_attributes[],
-	OPENSSL_ITEM add_sttributes[], OPENSSL_ITEM modify_attributes[],
-	OPENSSL_ITEM delete_attributes[], OPENSSL_ITEM parameters[]);
-int STORE_revoke_public_key(STORE *e, OPENSSL_ITEM attributes[],
-	OPENSSL_ITEM parameters[]);
-int STORE_delete_public_key(STORE *e, OPENSSL_ITEM attributes[],
-	OPENSSL_ITEM parameters[]);
-void *STORE_list_public_key_start(STORE *e, OPENSSL_ITEM attributes[],
-	OPENSSL_ITEM parameters[]);
-EVP_PKEY *STORE_list_public_key_next(STORE *e, void *handle);
-int STORE_list_public_key_end(STORE *e, void *handle);
-int STORE_list_public_key_endp(STORE *e, void *handle);
-X509_CRL *STORE_generate_crl(STORE *e, OPENSSL_ITEM attributes[],
-	OPENSSL_ITEM parameters[]);
-X509_CRL *STORE_get_crl(STORE *e, OPENSSL_ITEM attributes[],
-	OPENSSL_ITEM parameters[]);
-int STORE_store_crl(STORE *e, X509_CRL *data, OPENSSL_ITEM attributes[],
-	OPENSSL_ITEM parameters[]);
-int STORE_modify_crl(STORE *e, OPENSSL_ITEM search_attributes[],
-	OPENSSL_ITEM add_sttributes[], OPENSSL_ITEM modify_attributes[],
-	OPENSSL_ITEM delete_attributes[], OPENSSL_ITEM parameters[]);
-int STORE_delete_crl(STORE *e, OPENSSL_ITEM attributes[],
-	OPENSSL_ITEM parameters[]);
-void *STORE_list_crl_start(STORE *e, OPENSSL_ITEM attributes[],
-	OPENSSL_ITEM parameters[]);
-X509_CRL *STORE_list_crl_next(STORE *e, void *handle);
-int STORE_list_crl_end(STORE *e, void *handle);
-int STORE_list_crl_endp(STORE *e, void *handle);
-int STORE_store_number(STORE *e, BIGNUM *data, OPENSSL_ITEM attributes[],
-	OPENSSL_ITEM parameters[]);
-int STORE_modify_number(STORE *e, OPENSSL_ITEM search_attributes[],
-	OPENSSL_ITEM add_sttributes[], OPENSSL_ITEM modify_attributes[],
-	OPENSSL_ITEM delete_attributes[], OPENSSL_ITEM parameters[]);
-BIGNUM *STORE_get_number(STORE *e, OPENSSL_ITEM attributes[],
-	OPENSSL_ITEM parameters[]);
-int STORE_delete_number(STORE *e, OPENSSL_ITEM attributes[],
-	OPENSSL_ITEM parameters[]);
-int STORE_store_arbitrary(STORE *e, BUF_MEM *data, OPENSSL_ITEM attributes[],
-	OPENSSL_ITEM parameters[]);
-int STORE_modify_arbitrary(STORE *e, OPENSSL_ITEM search_attributes[],
-	OPENSSL_ITEM add_sttributes[], OPENSSL_ITEM modify_attributes[],
-	OPENSSL_ITEM delete_attributes[], OPENSSL_ITEM parameters[]);
-BUF_MEM *STORE_get_arbitrary(STORE *e, OPENSSL_ITEM attributes[],
-	OPENSSL_ITEM parameters[]);
-int STORE_delete_arbitrary(STORE *e, OPENSSL_ITEM attributes[],
-	OPENSSL_ITEM parameters[]);
-
-
-/* Create and manipulate methods */
-STORE_METHOD *STORE_create_method(char *name);
-void STORE_destroy_method(STORE_METHOD *store_method);
-
-/* These callback types are use for store handlers */
-typedef int (*STORE_INITIALISE_FUNC_PTR)(STORE *);
-typedef void (*STORE_CLEANUP_FUNC_PTR)(STORE *);
-typedef STORE_OBJECT *(*STORE_GENERATE_OBJECT_FUNC_PTR)(STORE *, STORE_OBJECT_TYPES type, OPENSSL_ITEM attributes[], OPENSSL_ITEM parameters[]);
-typedef STORE_OBJECT *(*STORE_GET_OBJECT_FUNC_PTR)(STORE *, STORE_OBJECT_TYPES type, OPENSSL_ITEM attributes[], OPENSSL_ITEM parameters[]);
-typedef void *(*STORE_START_OBJECT_FUNC_PTR)(STORE *, STORE_OBJECT_TYPES type, OPENSSL_ITEM attributes[], OPENSSL_ITEM parameters[]);
-typedef STORE_OBJECT *(*STORE_NEXT_OBJECT_FUNC_PTR)(STORE *, void *handle);
-typedef int (*STORE_END_OBJECT_FUNC_PTR)(STORE *, void *handle);
-typedef int (*STORE_HANDLE_OBJECT_FUNC_PTR)(STORE *, STORE_OBJECT_TYPES type, OPENSSL_ITEM attributes[], OPENSSL_ITEM parameters[]);
-typedef int (*STORE_STORE_OBJECT_FUNC_PTR)(STORE *, STORE_OBJECT_TYPES type, STORE_OBJECT *data, OPENSSL_ITEM attributes[], OPENSSL_ITEM parameters[]);
-typedef int (*STORE_MODIFY_OBJECT_FUNC_PTR)(STORE *, STORE_OBJECT_TYPES type, OPENSSL_ITEM search_attributes[], OPENSSL_ITEM add_attributes[], OPENSSL_ITEM modify_attributes[], OPENSSL_ITEM delete_attributes[], OPENSSL_ITEM parameters[]);
-typedef int (*STORE_GENERIC_FUNC_PTR)(STORE *, OPENSSL_ITEM attributes[], OPENSSL_ITEM parameters[]);
-typedef int (*STORE_CTRL_FUNC_PTR)(STORE *, int cmd, long l, void *p, void (*f)(void));
-
-int STORE_method_set_initialise_function(STORE_METHOD *sm, STORE_INITIALISE_FUNC_PTR init_f);
-int STORE_method_set_cleanup_function(STORE_METHOD *sm, STORE_CLEANUP_FUNC_PTR clean_f);
-int STORE_method_set_generate_function(STORE_METHOD *sm, STORE_GENERATE_OBJECT_FUNC_PTR generate_f);
-int STORE_method_set_get_function(STORE_METHOD *sm, STORE_GET_OBJECT_FUNC_PTR get_f);
-int STORE_method_set_store_function(STORE_METHOD *sm, STORE_STORE_OBJECT_FUNC_PTR store_f);
-int STORE_method_set_modify_function(STORE_METHOD *sm, STORE_MODIFY_OBJECT_FUNC_PTR store_f);
-int STORE_method_set_revoke_function(STORE_METHOD *sm, STORE_HANDLE_OBJECT_FUNC_PTR revoke_f);
-int STORE_method_set_delete_function(STORE_METHOD *sm, STORE_HANDLE_OBJECT_FUNC_PTR delete_f);
-int STORE_method_set_list_start_function(STORE_METHOD *sm, STORE_START_OBJECT_FUNC_PTR list_start_f);
-int STORE_method_set_list_next_function(STORE_METHOD *sm, STORE_NEXT_OBJECT_FUNC_PTR list_next_f);
-int STORE_method_set_list_end_function(STORE_METHOD *sm, STORE_END_OBJECT_FUNC_PTR list_end_f);
-int STORE_method_set_update_store_function(STORE_METHOD *sm, STORE_GENERIC_FUNC_PTR);
-int STORE_method_set_lock_store_function(STORE_METHOD *sm, STORE_GENERIC_FUNC_PTR);
-int STORE_method_set_unlock_store_function(STORE_METHOD *sm, STORE_GENERIC_FUNC_PTR);
-int STORE_method_set_ctrl_function(STORE_METHOD *sm, STORE_CTRL_FUNC_PTR ctrl_f);
-
-STORE_INITIALISE_FUNC_PTR STORE_method_get_initialise_function(STORE_METHOD *sm);
-STORE_CLEANUP_FUNC_PTR STORE_method_get_cleanup_function(STORE_METHOD *sm);
-STORE_GENERATE_OBJECT_FUNC_PTR STORE_method_get_generate_function(STORE_METHOD *sm);
-STORE_GET_OBJECT_FUNC_PTR STORE_method_get_get_function(STORE_METHOD *sm);
-STORE_STORE_OBJECT_FUNC_PTR STORE_method_get_store_function(STORE_METHOD *sm);
-STORE_MODIFY_OBJECT_FUNC_PTR STORE_method_get_modify_function(STORE_METHOD *sm);
-STORE_HANDLE_OBJECT_FUNC_PTR STORE_method_get_revoke_function(STORE_METHOD *sm);
-STORE_HANDLE_OBJECT_FUNC_PTR STORE_method_get_delete_function(STORE_METHOD *sm);
-STORE_START_OBJECT_FUNC_PTR STORE_method_get_list_start_function(STORE_METHOD *sm);
-STORE_NEXT_OBJECT_FUNC_PTR STORE_method_get_list_next_function(STORE_METHOD *sm);
-STORE_END_OBJECT_FUNC_PTR STORE_method_get_list_end_function(STORE_METHOD *sm);
-STORE_GENERIC_FUNC_PTR STORE_method_get_update_store_function(STORE_METHOD *sm);
-STORE_GENERIC_FUNC_PTR STORE_method_get_lock_store_function(STORE_METHOD *sm);
-STORE_GENERIC_FUNC_PTR STORE_method_get_unlock_store_function(STORE_METHOD *sm);
-STORE_CTRL_FUNC_PTR STORE_method_get_ctrl_function(STORE_METHOD *sm);
-
-/* Method helper structures and functions. */
-
-/* This structure is the result of parsing through the information in a list
-   of OPENSSL_ITEMs.  It stores all the necessary information in a structured
-   way.*/
-typedef struct STORE_attr_info_st STORE_ATTR_INFO;
-
-/* Parse a list of OPENSSL_ITEMs and return a pointer to a STORE_ATTR_INFO.
-   Note that we do this in the list form, since the list of OPENSSL_ITEMs can
-   come in blocks separated with STORE_ATTR_OR.  Note that the value returned
-   by STORE_parse_attrs_next() must be freed with STORE_ATTR_INFO_free(). */
-void *STORE_parse_attrs_start(OPENSSL_ITEM *attributes);
-STORE_ATTR_INFO *STORE_parse_attrs_next(void *handle);
-int STORE_parse_attrs_end(void *handle);
-int STORE_parse_attrs_endp(void *handle);
-
-/* Creator and destructor */
-STORE_ATTR_INFO *STORE_ATTR_INFO_new(void);
-int STORE_ATTR_INFO_free(STORE_ATTR_INFO *attrs);
-
-/* Manipulators */
-char *STORE_ATTR_INFO_get0_cstr(STORE_ATTR_INFO *attrs, STORE_ATTR_TYPES code);
-unsigned char *STORE_ATTR_INFO_get0_sha1str(STORE_ATTR_INFO *attrs,
-	STORE_ATTR_TYPES code);
-X509_NAME *STORE_ATTR_INFO_get0_dn(STORE_ATTR_INFO *attrs, STORE_ATTR_TYPES code);
-BIGNUM *STORE_ATTR_INFO_get0_number(STORE_ATTR_INFO *attrs, STORE_ATTR_TYPES code);
-int STORE_ATTR_INFO_set_cstr(STORE_ATTR_INFO *attrs, STORE_ATTR_TYPES code,
-	char *cstr, size_t cstr_size);
-int STORE_ATTR_INFO_set_sha1str(STORE_ATTR_INFO *attrs, STORE_ATTR_TYPES code,
-	unsigned char *sha1str, size_t sha1str_size);
-int STORE_ATTR_INFO_set_dn(STORE_ATTR_INFO *attrs, STORE_ATTR_TYPES code,
-	X509_NAME *dn);
-int STORE_ATTR_INFO_set_number(STORE_ATTR_INFO *attrs, STORE_ATTR_TYPES code,
-	BIGNUM *number);
-int STORE_ATTR_INFO_modify_cstr(STORE_ATTR_INFO *attrs, STORE_ATTR_TYPES code,
-	char *cstr, size_t cstr_size);
-int STORE_ATTR_INFO_modify_sha1str(STORE_ATTR_INFO *attrs, STORE_ATTR_TYPES code,
-	unsigned char *sha1str, size_t sha1str_size);
-int STORE_ATTR_INFO_modify_dn(STORE_ATTR_INFO *attrs, STORE_ATTR_TYPES code,
-	X509_NAME *dn);
-int STORE_ATTR_INFO_modify_number(STORE_ATTR_INFO *attrs, STORE_ATTR_TYPES code,
-	BIGNUM *number);
-
-/* Compare on basis of a bit pattern formed by the STORE_ATTR_TYPES values
-   in each contained attribute. */
-int STORE_ATTR_INFO_compare(STORE_ATTR_INFO *a, STORE_ATTR_INFO *b);
-/* Check if the set of attributes in a is within the range of attributes
-   set in b. */
-int STORE_ATTR_INFO_in_range(STORE_ATTR_INFO *a, STORE_ATTR_INFO *b);
-/* Check if the set of attributes in a are also set in b. */
-int STORE_ATTR_INFO_in(STORE_ATTR_INFO *a, STORE_ATTR_INFO *b);
-/* Same as STORE_ATTR_INFO_in(), but also checks the attribute values. */
-int STORE_ATTR_INFO_in_ex(STORE_ATTR_INFO *a, STORE_ATTR_INFO *b);
-
-
-/* BEGIN ERROR CODES */
-/* The following lines are auto generated by the script mkerr.pl. Any changes
- * made after this point may be overwritten when the script is next run.
- */
-void ERR_load_STORE_strings(void);
-
-/* Error codes for the STORE functions. */
-
-/* Function codes. */
-#define STORE_F_MEM_DELETE				 134
-#define STORE_F_MEM_GENERATE				 135
-#define STORE_F_MEM_LIST_END				 168
-#define STORE_F_MEM_LIST_NEXT				 136
-#define STORE_F_MEM_LIST_START				 137
-#define STORE_F_MEM_MODIFY				 169
-#define STORE_F_MEM_STORE				 138
-#define STORE_F_STORE_ATTR_INFO_GET0_CSTR		 139
-#define STORE_F_STORE_ATTR_INFO_GET0_DN			 140
-#define STORE_F_STORE_ATTR_INFO_GET0_NUMBER		 141
-#define STORE_F_STORE_ATTR_INFO_GET0_SHA1STR		 142
-#define STORE_F_STORE_ATTR_INFO_MODIFY_CSTR		 143
-#define STORE_F_STORE_ATTR_INFO_MODIFY_DN		 144
-#define STORE_F_STORE_ATTR_INFO_MODIFY_NUMBER		 145
-#define STORE_F_STORE_ATTR_INFO_MODIFY_SHA1STR		 146
-#define STORE_F_STORE_ATTR_INFO_SET_CSTR		 147
-#define STORE_F_STORE_ATTR_INFO_SET_DN			 148
-#define STORE_F_STORE_ATTR_INFO_SET_NUMBER		 149
-#define STORE_F_STORE_ATTR_INFO_SET_SHA1STR		 150
-#define STORE_F_STORE_CERTIFICATE			 170
-#define STORE_F_STORE_CTRL				 161
-#define STORE_F_STORE_DELETE_ARBITRARY			 158
-#define STORE_F_STORE_DELETE_CERTIFICATE		 102
-#define STORE_F_STORE_DELETE_CRL			 103
-#define STORE_F_STORE_DELETE_NUMBER			 104
-#define STORE_F_STORE_DELETE_PRIVATE_KEY		 105
-#define STORE_F_STORE_DELETE_PUBLIC_KEY			 106
-#define STORE_F_STORE_GENERATE_CRL			 107
-#define STORE_F_STORE_GENERATE_KEY			 108
-#define STORE_F_STORE_GET_ARBITRARY			 159
-#define STORE_F_STORE_GET_CERTIFICATE			 109
-#define STORE_F_STORE_GET_CRL				 110
-#define STORE_F_STORE_GET_NUMBER			 111
-#define STORE_F_STORE_GET_PRIVATE_KEY			 112
-#define STORE_F_STORE_GET_PUBLIC_KEY			 113
-#define STORE_F_STORE_LIST_CERTIFICATE_END		 114
-#define STORE_F_STORE_LIST_CERTIFICATE_ENDP		 153
-#define STORE_F_STORE_LIST_CERTIFICATE_NEXT		 115
-#define STORE_F_STORE_LIST_CERTIFICATE_START		 116
-#define STORE_F_STORE_LIST_CRL_END			 117
-#define STORE_F_STORE_LIST_CRL_ENDP			 154
-#define STORE_F_STORE_LIST_CRL_NEXT			 118
-#define STORE_F_STORE_LIST_CRL_START			 119
-#define STORE_F_STORE_LIST_PRIVATE_KEY_END		 120
-#define STORE_F_STORE_LIST_PRIVATE_KEY_ENDP		 155
-#define STORE_F_STORE_LIST_PRIVATE_KEY_NEXT		 121
-#define STORE_F_STORE_LIST_PRIVATE_KEY_START		 122
-#define STORE_F_STORE_LIST_PUBLIC_KEY_END		 123
-#define STORE_F_STORE_LIST_PUBLIC_KEY_ENDP		 156
-#define STORE_F_STORE_LIST_PUBLIC_KEY_NEXT		 124
-#define STORE_F_STORE_LIST_PUBLIC_KEY_START		 125
-#define STORE_F_STORE_MODIFY_ARBITRARY			 162
-#define STORE_F_STORE_MODIFY_CERTIFICATE		 163
-#define STORE_F_STORE_MODIFY_CRL			 164
-#define STORE_F_STORE_MODIFY_NUMBER			 165
-#define STORE_F_STORE_MODIFY_PRIVATE_KEY		 166
-#define STORE_F_STORE_MODIFY_PUBLIC_KEY			 167
-#define STORE_F_STORE_NEW_ENGINE			 133
-#define STORE_F_STORE_NEW_METHOD			 132
-#define STORE_F_STORE_PARSE_ATTRS_END			 151
-#define STORE_F_STORE_PARSE_ATTRS_ENDP			 172
-#define STORE_F_STORE_PARSE_ATTRS_NEXT			 152
-#define STORE_F_STORE_PARSE_ATTRS_START			 171
-#define STORE_F_STORE_REVOKE_CERTIFICATE		 129
-#define STORE_F_STORE_REVOKE_PRIVATE_KEY		 130
-#define STORE_F_STORE_REVOKE_PUBLIC_KEY			 131
-#define STORE_F_STORE_STORE_ARBITRARY			 157
-#define STORE_F_STORE_STORE_CERTIFICATE			 100
-#define STORE_F_STORE_STORE_CRL				 101
-#define STORE_F_STORE_STORE_NUMBER			 126
-#define STORE_F_STORE_STORE_PRIVATE_KEY			 127
-#define STORE_F_STORE_STORE_PUBLIC_KEY			 128
-
-/* Reason codes. */
-#define STORE_R_ALREADY_HAS_A_VALUE			 127
-#define STORE_R_FAILED_DELETING_ARBITRARY		 132
-#define STORE_R_FAILED_DELETING_CERTIFICATE		 100
-#define STORE_R_FAILED_DELETING_KEY			 101
-#define STORE_R_FAILED_DELETING_NUMBER			 102
-#define STORE_R_FAILED_GENERATING_CRL			 103
-#define STORE_R_FAILED_GENERATING_KEY			 104
-#define STORE_R_FAILED_GETTING_ARBITRARY		 133
-#define STORE_R_FAILED_GETTING_CERTIFICATE		 105
-#define STORE_R_FAILED_GETTING_KEY			 106
-#define STORE_R_FAILED_GETTING_NUMBER			 107
-#define STORE_R_FAILED_LISTING_CERTIFICATES		 108
-#define STORE_R_FAILED_LISTING_KEYS			 109
-#define STORE_R_FAILED_MODIFYING_ARBITRARY		 138
-#define STORE_R_FAILED_MODIFYING_CERTIFICATE		 139
-#define STORE_R_FAILED_MODIFYING_CRL			 140
-#define STORE_R_FAILED_MODIFYING_NUMBER			 141
-#define STORE_R_FAILED_MODIFYING_PRIVATE_KEY		 142
-#define STORE_R_FAILED_MODIFYING_PUBLIC_KEY		 143
-#define STORE_R_FAILED_REVOKING_CERTIFICATE		 110
-#define STORE_R_FAILED_REVOKING_KEY			 111
-#define STORE_R_FAILED_STORING_ARBITRARY		 134
-#define STORE_R_FAILED_STORING_CERTIFICATE		 112
-#define STORE_R_FAILED_STORING_KEY			 113
-#define STORE_R_FAILED_STORING_NUMBER			 114
-#define STORE_R_NOT_IMPLEMENTED				 128
-#define STORE_R_NO_CONTROL_FUNCTION			 144
-#define STORE_R_NO_DELETE_ARBITRARY_FUNCTION		 135
-#define STORE_R_NO_DELETE_NUMBER_FUNCTION		 115
-#define STORE_R_NO_DELETE_OBJECT_FUNCTION		 116
-#define STORE_R_NO_GENERATE_CRL_FUNCTION		 117
-#define STORE_R_NO_GENERATE_OBJECT_FUNCTION		 118
-#define STORE_R_NO_GET_OBJECT_ARBITRARY_FUNCTION	 136
-#define STORE_R_NO_GET_OBJECT_FUNCTION			 119
-#define STORE_R_NO_GET_OBJECT_NUMBER_FUNCTION		 120
-#define STORE_R_NO_LIST_OBJECT_ENDP_FUNCTION		 131
-#define STORE_R_NO_LIST_OBJECT_END_FUNCTION		 121
-#define STORE_R_NO_LIST_OBJECT_NEXT_FUNCTION		 122
-#define STORE_R_NO_LIST_OBJECT_START_FUNCTION		 123
-#define STORE_R_NO_MODIFY_OBJECT_FUNCTION		 145
-#define STORE_R_NO_REVOKE_OBJECT_FUNCTION		 124
-#define STORE_R_NO_STORE				 129
-#define STORE_R_NO_STORE_OBJECT_ARBITRARY_FUNCTION	 137
-#define STORE_R_NO_STORE_OBJECT_FUNCTION		 125
-#define STORE_R_NO_STORE_OBJECT_NUMBER_FUNCTION		 126
-#define STORE_R_NO_VALUE				 130
-
-#ifdef  __cplusplus
-}
-#endif
-#endif
diff --git a/crypto/openssl/crypto/store/str_err.c b/crypto/openssl/crypto/store/str_err.c
deleted file mode 100644
index 6fee6498220a..000000000000
--- a/crypto/openssl/crypto/store/str_err.c
+++ /dev/null
@@ -1,211 +0,0 @@
-/* crypto/store/str_err.c */
-/* ====================================================================
- * Copyright (c) 1999-2005 The OpenSSL Project.  All rights reserved.
- *
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions
- * are met:
- *
- * 1. Redistributions of source code must retain the above copyright
- *    notice, this list of conditions and the following disclaimer. 
- *
- * 2. Redistributions in binary form must reproduce the above copyright
- *    notice, this list of conditions and the following disclaimer in
- *    the documentation and/or other materials provided with the
- *    distribution.
- *
- * 3. All advertising materials mentioning features or use of this
- *    software must display the following acknowledgment:
- *    "This product includes software developed by the OpenSSL Project
- *    for use in the OpenSSL Toolkit. (http://www.OpenSSL.org/)"
- *
- * 4. The names "OpenSSL Toolkit" and "OpenSSL Project" must not be used to
- *    endorse or promote products derived from this software without
- *    prior written permission. For written permission, please contact
- *    openssl-core@OpenSSL.org.
- *
- * 5. Products derived from this software may not be called "OpenSSL"
- *    nor may "OpenSSL" appear in their names without prior written
- *    permission of the OpenSSL Project.
- *
- * 6. Redistributions of any form whatsoever must retain the following
- *    acknowledgment:
- *    "This product includes software developed by the OpenSSL Project
- *    for use in the OpenSSL Toolkit (http://www.OpenSSL.org/)"
- *
- * THIS SOFTWARE IS PROVIDED BY THE OpenSSL PROJECT ``AS IS'' AND ANY
- * EXPRESSED OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
- * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR
- * PURPOSE ARE DISCLAIMED.  IN NO EVENT SHALL THE OpenSSL PROJECT OR
- * ITS CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
- * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
- * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
- * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
- * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
- * STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
- * ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED
- * OF THE POSSIBILITY OF SUCH DAMAGE.
- * ====================================================================
- *
- * This product includes cryptographic software written by Eric Young
- * (eay@cryptsoft.com).  This product includes software written by Tim
- * Hudson (tjh@cryptsoft.com).
- *
- */
-
-/* NOTE: this file was auto generated by the mkerr.pl script: any changes
- * made to it will be overwritten when the script next updates this file,
- * only reason strings will be preserved.
- */
-
-#include <stdio.h>
-#include <openssl/err.h>
-#include <openssl/store.h>
-
-/* BEGIN ERROR CODES */
-#ifndef OPENSSL_NO_ERR
-
-#define ERR_FUNC(func) ERR_PACK(ERR_LIB_STORE,func,0)
-#define ERR_REASON(reason) ERR_PACK(ERR_LIB_STORE,0,reason)
-
-static ERR_STRING_DATA STORE_str_functs[]=
-	{
-{ERR_FUNC(STORE_F_MEM_DELETE),	"MEM_DELETE"},
-{ERR_FUNC(STORE_F_MEM_GENERATE),	"MEM_GENERATE"},
-{ERR_FUNC(STORE_F_MEM_LIST_END),	"MEM_LIST_END"},
-{ERR_FUNC(STORE_F_MEM_LIST_NEXT),	"MEM_LIST_NEXT"},
-{ERR_FUNC(STORE_F_MEM_LIST_START),	"MEM_LIST_START"},
-{ERR_FUNC(STORE_F_MEM_MODIFY),	"MEM_MODIFY"},
-{ERR_FUNC(STORE_F_MEM_STORE),	"MEM_STORE"},
-{ERR_FUNC(STORE_F_STORE_ATTR_INFO_GET0_CSTR),	"STORE_ATTR_INFO_get0_cstr"},
-{ERR_FUNC(STORE_F_STORE_ATTR_INFO_GET0_DN),	"STORE_ATTR_INFO_get0_dn"},
-{ERR_FUNC(STORE_F_STORE_ATTR_INFO_GET0_NUMBER),	"STORE_ATTR_INFO_get0_number"},
-{ERR_FUNC(STORE_F_STORE_ATTR_INFO_GET0_SHA1STR),	"STORE_ATTR_INFO_get0_sha1str"},
-{ERR_FUNC(STORE_F_STORE_ATTR_INFO_MODIFY_CSTR),	"STORE_ATTR_INFO_modify_cstr"},
-{ERR_FUNC(STORE_F_STORE_ATTR_INFO_MODIFY_DN),	"STORE_ATTR_INFO_modify_dn"},
-{ERR_FUNC(STORE_F_STORE_ATTR_INFO_MODIFY_NUMBER),	"STORE_ATTR_INFO_modify_number"},
-{ERR_FUNC(STORE_F_STORE_ATTR_INFO_MODIFY_SHA1STR),	"STORE_ATTR_INFO_modify_sha1str"},
-{ERR_FUNC(STORE_F_STORE_ATTR_INFO_SET_CSTR),	"STORE_ATTR_INFO_set_cstr"},
-{ERR_FUNC(STORE_F_STORE_ATTR_INFO_SET_DN),	"STORE_ATTR_INFO_set_dn"},
-{ERR_FUNC(STORE_F_STORE_ATTR_INFO_SET_NUMBER),	"STORE_ATTR_INFO_set_number"},
-{ERR_FUNC(STORE_F_STORE_ATTR_INFO_SET_SHA1STR),	"STORE_ATTR_INFO_set_sha1str"},
-{ERR_FUNC(STORE_F_STORE_CERTIFICATE),	"STORE_CERTIFICATE"},
-{ERR_FUNC(STORE_F_STORE_CTRL),	"STORE_ctrl"},
-{ERR_FUNC(STORE_F_STORE_DELETE_ARBITRARY),	"STORE_delete_arbitrary"},
-{ERR_FUNC(STORE_F_STORE_DELETE_CERTIFICATE),	"STORE_delete_certificate"},
-{ERR_FUNC(STORE_F_STORE_DELETE_CRL),	"STORE_delete_crl"},
-{ERR_FUNC(STORE_F_STORE_DELETE_NUMBER),	"STORE_delete_number"},
-{ERR_FUNC(STORE_F_STORE_DELETE_PRIVATE_KEY),	"STORE_delete_private_key"},
-{ERR_FUNC(STORE_F_STORE_DELETE_PUBLIC_KEY),	"STORE_delete_public_key"},
-{ERR_FUNC(STORE_F_STORE_GENERATE_CRL),	"STORE_generate_crl"},
-{ERR_FUNC(STORE_F_STORE_GENERATE_KEY),	"STORE_generate_key"},
-{ERR_FUNC(STORE_F_STORE_GET_ARBITRARY),	"STORE_get_arbitrary"},
-{ERR_FUNC(STORE_F_STORE_GET_CERTIFICATE),	"STORE_get_certificate"},
-{ERR_FUNC(STORE_F_STORE_GET_CRL),	"STORE_get_crl"},
-{ERR_FUNC(STORE_F_STORE_GET_NUMBER),	"STORE_get_number"},
-{ERR_FUNC(STORE_F_STORE_GET_PRIVATE_KEY),	"STORE_get_private_key"},
-{ERR_FUNC(STORE_F_STORE_GET_PUBLIC_KEY),	"STORE_get_public_key"},
-{ERR_FUNC(STORE_F_STORE_LIST_CERTIFICATE_END),	"STORE_list_certificate_end"},
-{ERR_FUNC(STORE_F_STORE_LIST_CERTIFICATE_ENDP),	"STORE_list_certificate_endp"},
-{ERR_FUNC(STORE_F_STORE_LIST_CERTIFICATE_NEXT),	"STORE_list_certificate_next"},
-{ERR_FUNC(STORE_F_STORE_LIST_CERTIFICATE_START),	"STORE_list_certificate_start"},
-{ERR_FUNC(STORE_F_STORE_LIST_CRL_END),	"STORE_list_crl_end"},
-{ERR_FUNC(STORE_F_STORE_LIST_CRL_ENDP),	"STORE_list_crl_endp"},
-{ERR_FUNC(STORE_F_STORE_LIST_CRL_NEXT),	"STORE_list_crl_next"},
-{ERR_FUNC(STORE_F_STORE_LIST_CRL_START),	"STORE_list_crl_start"},
-{ERR_FUNC(STORE_F_STORE_LIST_PRIVATE_KEY_END),	"STORE_list_private_key_end"},
-{ERR_FUNC(STORE_F_STORE_LIST_PRIVATE_KEY_ENDP),	"STORE_list_private_key_endp"},
-{ERR_FUNC(STORE_F_STORE_LIST_PRIVATE_KEY_NEXT),	"STORE_list_private_key_next"},
-{ERR_FUNC(STORE_F_STORE_LIST_PRIVATE_KEY_START),	"STORE_list_private_key_start"},
-{ERR_FUNC(STORE_F_STORE_LIST_PUBLIC_KEY_END),	"STORE_list_public_key_end"},
-{ERR_FUNC(STORE_F_STORE_LIST_PUBLIC_KEY_ENDP),	"STORE_list_public_key_endp"},
-{ERR_FUNC(STORE_F_STORE_LIST_PUBLIC_KEY_NEXT),	"STORE_list_public_key_next"},
-{ERR_FUNC(STORE_F_STORE_LIST_PUBLIC_KEY_START),	"STORE_list_public_key_start"},
-{ERR_FUNC(STORE_F_STORE_MODIFY_ARBITRARY),	"STORE_modify_arbitrary"},
-{ERR_FUNC(STORE_F_STORE_MODIFY_CERTIFICATE),	"STORE_modify_certificate"},
-{ERR_FUNC(STORE_F_STORE_MODIFY_CRL),	"STORE_modify_crl"},
-{ERR_FUNC(STORE_F_STORE_MODIFY_NUMBER),	"STORE_modify_number"},
-{ERR_FUNC(STORE_F_STORE_MODIFY_PRIVATE_KEY),	"STORE_modify_private_key"},
-{ERR_FUNC(STORE_F_STORE_MODIFY_PUBLIC_KEY),	"STORE_modify_public_key"},
-{ERR_FUNC(STORE_F_STORE_NEW_ENGINE),	"STORE_new_engine"},
-{ERR_FUNC(STORE_F_STORE_NEW_METHOD),	"STORE_new_method"},
-{ERR_FUNC(STORE_F_STORE_PARSE_ATTRS_END),	"STORE_parse_attrs_end"},
-{ERR_FUNC(STORE_F_STORE_PARSE_ATTRS_ENDP),	"STORE_parse_attrs_endp"},
-{ERR_FUNC(STORE_F_STORE_PARSE_ATTRS_NEXT),	"STORE_parse_attrs_next"},
-{ERR_FUNC(STORE_F_STORE_PARSE_ATTRS_START),	"STORE_parse_attrs_start"},
-{ERR_FUNC(STORE_F_STORE_REVOKE_CERTIFICATE),	"STORE_revoke_certificate"},
-{ERR_FUNC(STORE_F_STORE_REVOKE_PRIVATE_KEY),	"STORE_revoke_private_key"},
-{ERR_FUNC(STORE_F_STORE_REVOKE_PUBLIC_KEY),	"STORE_revoke_public_key"},
-{ERR_FUNC(STORE_F_STORE_STORE_ARBITRARY),	"STORE_store_arbitrary"},
-{ERR_FUNC(STORE_F_STORE_STORE_CERTIFICATE),	"STORE_store_certificate"},
-{ERR_FUNC(STORE_F_STORE_STORE_CRL),	"STORE_store_crl"},
-{ERR_FUNC(STORE_F_STORE_STORE_NUMBER),	"STORE_store_number"},
-{ERR_FUNC(STORE_F_STORE_STORE_PRIVATE_KEY),	"STORE_store_private_key"},
-{ERR_FUNC(STORE_F_STORE_STORE_PUBLIC_KEY),	"STORE_store_public_key"},
-{0,NULL}
-	};
-
-static ERR_STRING_DATA STORE_str_reasons[]=
-	{
-{ERR_REASON(STORE_R_ALREADY_HAS_A_VALUE) ,"already has a value"},
-{ERR_REASON(STORE_R_FAILED_DELETING_ARBITRARY),"failed deleting arbitrary"},
-{ERR_REASON(STORE_R_FAILED_DELETING_CERTIFICATE),"failed deleting certificate"},
-{ERR_REASON(STORE_R_FAILED_DELETING_KEY) ,"failed deleting key"},
-{ERR_REASON(STORE_R_FAILED_DELETING_NUMBER),"failed deleting number"},
-{ERR_REASON(STORE_R_FAILED_GENERATING_CRL),"failed generating crl"},
-{ERR_REASON(STORE_R_FAILED_GENERATING_KEY),"failed generating key"},
-{ERR_REASON(STORE_R_FAILED_GETTING_ARBITRARY),"failed getting arbitrary"},
-{ERR_REASON(STORE_R_FAILED_GETTING_CERTIFICATE),"failed getting certificate"},
-{ERR_REASON(STORE_R_FAILED_GETTING_KEY)  ,"failed getting key"},
-{ERR_REASON(STORE_R_FAILED_GETTING_NUMBER),"failed getting number"},
-{ERR_REASON(STORE_R_FAILED_LISTING_CERTIFICATES),"failed listing certificates"},
-{ERR_REASON(STORE_R_FAILED_LISTING_KEYS) ,"failed listing keys"},
-{ERR_REASON(STORE_R_FAILED_MODIFYING_ARBITRARY),"failed modifying arbitrary"},
-{ERR_REASON(STORE_R_FAILED_MODIFYING_CERTIFICATE),"failed modifying certificate"},
-{ERR_REASON(STORE_R_FAILED_MODIFYING_CRL),"failed modifying crl"},
-{ERR_REASON(STORE_R_FAILED_MODIFYING_NUMBER),"failed modifying number"},
-{ERR_REASON(STORE_R_FAILED_MODIFYING_PRIVATE_KEY),"failed modifying private key"},
-{ERR_REASON(STORE_R_FAILED_MODIFYING_PUBLIC_KEY),"failed modifying public key"},
-{ERR_REASON(STORE_R_FAILED_REVOKING_CERTIFICATE),"failed revoking certificate"},
-{ERR_REASON(STORE_R_FAILED_REVOKING_KEY) ,"failed revoking key"},
-{ERR_REASON(STORE_R_FAILED_STORING_ARBITRARY),"failed storing arbitrary"},
-{ERR_REASON(STORE_R_FAILED_STORING_CERTIFICATE),"failed storing certificate"},
-{ERR_REASON(STORE_R_FAILED_STORING_KEY)  ,"failed storing key"},
-{ERR_REASON(STORE_R_FAILED_STORING_NUMBER),"failed storing number"},
-{ERR_REASON(STORE_R_NOT_IMPLEMENTED)     ,"not implemented"},
-{ERR_REASON(STORE_R_NO_CONTROL_FUNCTION) ,"no control function"},
-{ERR_REASON(STORE_R_NO_DELETE_ARBITRARY_FUNCTION),"no delete arbitrary function"},
-{ERR_REASON(STORE_R_NO_DELETE_NUMBER_FUNCTION),"no delete number function"},
-{ERR_REASON(STORE_R_NO_DELETE_OBJECT_FUNCTION),"no delete object function"},
-{ERR_REASON(STORE_R_NO_GENERATE_CRL_FUNCTION),"no generate crl function"},
-{ERR_REASON(STORE_R_NO_GENERATE_OBJECT_FUNCTION),"no generate object function"},
-{ERR_REASON(STORE_R_NO_GET_OBJECT_ARBITRARY_FUNCTION),"no get object arbitrary function"},
-{ERR_REASON(STORE_R_NO_GET_OBJECT_FUNCTION),"no get object function"},
-{ERR_REASON(STORE_R_NO_GET_OBJECT_NUMBER_FUNCTION),"no get object number function"},
-{ERR_REASON(STORE_R_NO_LIST_OBJECT_ENDP_FUNCTION),"no list object endp function"},
-{ERR_REASON(STORE_R_NO_LIST_OBJECT_END_FUNCTION),"no list object end function"},
-{ERR_REASON(STORE_R_NO_LIST_OBJECT_NEXT_FUNCTION),"no list object next function"},
-{ERR_REASON(STORE_R_NO_LIST_OBJECT_START_FUNCTION),"no list object start function"},
-{ERR_REASON(STORE_R_NO_MODIFY_OBJECT_FUNCTION),"no modify object function"},
-{ERR_REASON(STORE_R_NO_REVOKE_OBJECT_FUNCTION),"no revoke object function"},
-{ERR_REASON(STORE_R_NO_STORE)            ,"no store"},
-{ERR_REASON(STORE_R_NO_STORE_OBJECT_ARBITRARY_FUNCTION),"no store object arbitrary function"},
-{ERR_REASON(STORE_R_NO_STORE_OBJECT_FUNCTION),"no store object function"},
-{ERR_REASON(STORE_R_NO_STORE_OBJECT_NUMBER_FUNCTION),"no store object number function"},
-{ERR_REASON(STORE_R_NO_VALUE)            ,"no value"},
-{0,NULL}
-	};
-
-#endif
-
-void ERR_load_STORE_strings(void)
-	{
-#ifndef OPENSSL_NO_ERR
-
-	if (ERR_func_error_string(STORE_str_functs[0].error) == NULL)
-		{
-		ERR_load_strings(0,STORE_str_functs);
-		ERR_load_strings(0,STORE_str_reasons);
-		}
-#endif
-	}
diff --git a/crypto/openssl/crypto/store/str_lib.c b/crypto/openssl/crypto/store/str_lib.c
deleted file mode 100644
index c0ad763e9a1c..000000000000
--- a/crypto/openssl/crypto/store/str_lib.c
+++ /dev/null
@@ -1,1824 +0,0 @@
-/* crypto/store/str_lib.c -*- mode:C; c-file-style: "eay" -*- */
-/* Written by Richard Levitte (richard@levitte.org) for the OpenSSL
- * project 2003.
- */
-/* ====================================================================
- * Copyright (c) 2003 The OpenSSL Project.  All rights reserved.
- *
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions
- * are met:
- *
- * 1. Redistributions of source code must retain the above copyright
- *    notice, this list of conditions and the following disclaimer. 
- *
- * 2. Redistributions in binary form must reproduce the above copyright
- *    notice, this list of conditions and the following disclaimer in
- *    the documentation and/or other materials provided with the
- *    distribution.
- *
- * 3. All advertising materials mentioning features or use of this
- *    software must display the following acknowledgment:
- *    "This product includes software developed by the OpenSSL Project
- *    for use in the OpenSSL Toolkit. (http://www.openssl.org/)"
- *
- * 4. The names "OpenSSL Toolkit" and "OpenSSL Project" must not be used to
- *    endorse or promote products derived from this software without
- *    prior written permission. For written permission, please contact
- *    openssl-core@openssl.org.
- *
- * 5. Products derived from this software may not be called "OpenSSL"
- *    nor may "OpenSSL" appear in their names without prior written
- *    permission of the OpenSSL Project.
- *
- * 6. Redistributions of any form whatsoever must retain the following
- *    acknowledgment:
- *    "This product includes software developed by the OpenSSL Project
- *    for use in the OpenSSL Toolkit (http://www.openssl.org/)"
- *
- * THIS SOFTWARE IS PROVIDED BY THE OpenSSL PROJECT ``AS IS'' AND ANY
- * EXPRESSED OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
- * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR
- * PURPOSE ARE DISCLAIMED.  IN NO EVENT SHALL THE OpenSSL PROJECT OR
- * ITS CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
- * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
- * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
- * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
- * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
- * STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
- * ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED
- * OF THE POSSIBILITY OF SUCH DAMAGE.
- * ====================================================================
- *
- * This product includes cryptographic software written by Eric Young
- * (eay@cryptsoft.com).  This product includes software written by Tim
- * Hudson (tjh@cryptsoft.com).
- *
- */
-
-#include <string.h>
-#include <openssl/bn.h>
-#include <openssl/err.h>
-#ifndef OPENSSL_NO_ENGINE
-#include <openssl/engine.h>
-#endif
-#include <openssl/sha.h>
-#include <openssl/x509.h>
-#include "str_locl.h"
-
-const char * const STORE_object_type_string[STORE_OBJECT_TYPE_NUM+1] =
-	{
-	0,
-	"X.509 Certificate",
-	"X.509 CRL",
-	"Private Key",
-	"Public Key",
-	"Number",
-	"Arbitrary Data"
-	};
-
-const int STORE_param_sizes[STORE_PARAM_TYPE_NUM+1] =
-	{
-	0,
-	sizeof(int),		/* EVP_TYPE */
-	sizeof(size_t),		/* BITS */
-	-1,			/* KEY_PARAMETERS */
-	0			/* KEY_NO_PARAMETERS */
-	};	
-
-const int STORE_attr_sizes[STORE_ATTR_TYPE_NUM+1] =
-	{
-	0,
-	-1,			/* FRIENDLYNAME:	C string */
-	SHA_DIGEST_LENGTH,	/* KEYID:		SHA1 digest, 160 bits */
-	SHA_DIGEST_LENGTH,	/* ISSUERKEYID:		SHA1 digest, 160 bits */
-	SHA_DIGEST_LENGTH,	/* SUBJECTKEYID:	SHA1 digest, 160 bits */
-	SHA_DIGEST_LENGTH,	/* ISSUERSERIALHASH:	SHA1 digest, 160 bits */
-	sizeof(X509_NAME *),	/* ISSUER:		X509_NAME * */
-	sizeof(BIGNUM *),	/* SERIAL:		BIGNUM * */
-	sizeof(X509_NAME *),	/* SUBJECT:		X509_NAME * */
-	SHA_DIGEST_LENGTH,	/* CERTHASH:		SHA1 digest, 160 bits */
-	-1,			/* EMAIL:		C string */
-	-1,			/* FILENAME:		C string */
-	};	
-
-STORE *STORE_new_method(const STORE_METHOD *method)
-	{
-	STORE *ret;
-
-	if (method == NULL)
-		{
-		STOREerr(STORE_F_STORE_NEW_METHOD,ERR_R_PASSED_NULL_PARAMETER);
-		return NULL;
-		}
-
-	ret=(STORE *)OPENSSL_malloc(sizeof(STORE));
-	if (ret == NULL)
-		{
-		STOREerr(STORE_F_STORE_NEW_METHOD,ERR_R_MALLOC_FAILURE);
-		return NULL;
-		}
-
-	ret->meth=method;
-
-	CRYPTO_new_ex_data(CRYPTO_EX_INDEX_STORE, ret, &ret->ex_data);
-	if (ret->meth->init && !ret->meth->init(ret))
-		{
-		STORE_free(ret);
-		ret = NULL;
-		}
-	return ret;
-	}
-
-STORE *STORE_new_engine(ENGINE *engine)
-	{
-	STORE *ret = NULL;
-	ENGINE *e = engine;
-	const STORE_METHOD *meth = 0;
-
-#ifdef OPENSSL_NO_ENGINE
-	e = NULL;
-#else
-	if (engine)
-		{
-		if (!ENGINE_init(engine))
-			{
-			STOREerr(STORE_F_STORE_NEW_ENGINE, ERR_R_ENGINE_LIB);
-			return NULL;
-			}
-		e = engine;
-		}
-	else
-		{
-		STOREerr(STORE_F_STORE_NEW_ENGINE,ERR_R_PASSED_NULL_PARAMETER);
-		return NULL;
-		}
-	if(e)
-		{
-		meth = ENGINE_get_STORE(e);
-		if(!meth)
-			{
-			STOREerr(STORE_F_STORE_NEW_ENGINE,
-				ERR_R_ENGINE_LIB);
-			ENGINE_finish(e);
-			return NULL;
-			}
-		}
-#endif
-
-	ret = STORE_new_method(meth);
-	if (ret == NULL)
-		{
-		STOREerr(STORE_F_STORE_NEW_ENGINE,ERR_R_STORE_LIB);
-		return NULL;
-		}
-
-	ret->engine = e;
-
-	return(ret);
-	}
-
-void STORE_free(STORE *store)
-	{
-	if (store == NULL)
-		return;
-	if (store->meth->clean)
-		store->meth->clean(store);
-	CRYPTO_free_ex_data(CRYPTO_EX_INDEX_STORE, store, &store->ex_data);
-	OPENSSL_free(store);
-	}
-
-int STORE_ctrl(STORE *store, int cmd, long i, void *p, void (*f)(void))
-	{
-	if (store == NULL)
-		{
-		STOREerr(STORE_F_STORE_CTRL,ERR_R_PASSED_NULL_PARAMETER);
-		return 0;
-		}
-	if (store->meth->ctrl)
-		return store->meth->ctrl(store, cmd, i, p, f);
-	STOREerr(STORE_F_STORE_CTRL,STORE_R_NO_CONTROL_FUNCTION);
-	return 0;
-	}
-
-
-int STORE_get_ex_new_index(long argl, void *argp, CRYPTO_EX_new *new_func,
-	     CRYPTO_EX_dup *dup_func, CRYPTO_EX_free *free_func)
-        {
-	return CRYPTO_get_ex_new_index(CRYPTO_EX_INDEX_STORE, argl, argp,
-				new_func, dup_func, free_func);
-        }
-
-int STORE_set_ex_data(STORE *r, int idx, void *arg)
-	{
-	return(CRYPTO_set_ex_data(&r->ex_data,idx,arg));
-	}
-
-void *STORE_get_ex_data(STORE *r, int idx)
-	{
-	return(CRYPTO_get_ex_data(&r->ex_data,idx));
-	}
-
-const STORE_METHOD *STORE_get_method(STORE *store)
-	{
-	return store->meth;
-	}
-
-const STORE_METHOD *STORE_set_method(STORE *store, const STORE_METHOD *meth)
-	{
-	store->meth=meth;
-	return store->meth;
-	}
-
-
-/* API helpers */
-
-#define check_store(s,fncode,fnname,fnerrcode) \
-	do \
-		{ \
-		if ((s) == NULL || (s)->meth) \
-			{ \
-			STOREerr((fncode), ERR_R_PASSED_NULL_PARAMETER); \
-			return 0; \
-			} \
-		if ((s)->meth->fnname == NULL) \
-			{ \
-			STOREerr((fncode), (fnerrcode)); \
-			return 0; \
-			} \
-		} \
-	while(0)
-
-/* API functions */
-
-X509 *STORE_get_certificate(STORE *s, OPENSSL_ITEM attributes[],
-	OPENSSL_ITEM parameters[])
-	{
-	STORE_OBJECT *object;
-	X509 *x;
-
-	check_store(s,STORE_F_STORE_GET_CERTIFICATE,
-		get_object,STORE_R_NO_GET_OBJECT_FUNCTION);
-
-	object = s->meth->get_object(s, STORE_OBJECT_TYPE_X509_CERTIFICATE,
-		attributes, parameters);
-	if (!object || !object->data.x509.certificate)
-		{
-		STOREerr(STORE_F_STORE_GET_CERTIFICATE,
-			STORE_R_FAILED_GETTING_CERTIFICATE);
-		return 0;
-		}
-	CRYPTO_add(&object->data.x509.certificate->references,1,CRYPTO_LOCK_X509);
-#ifdef REF_PRINT
-	REF_PRINT("X509",data);
-#endif
-	x = object->data.x509.certificate;
-	STORE_OBJECT_free(object);
-	return x;
-	}
-
-int STORE_store_certificate(STORE *s, X509 *data, OPENSSL_ITEM attributes[],
-	OPENSSL_ITEM parameters[])
-	{
-	STORE_OBJECT *object;
-	int i;
-
-	check_store(s,STORE_F_STORE_CERTIFICATE,
-		store_object,STORE_R_NO_STORE_OBJECT_FUNCTION);
-
-	object = STORE_OBJECT_new();
-	if (!object)
-		{
-		STOREerr(STORE_F_STORE_STORE_CERTIFICATE,
-			ERR_R_MALLOC_FAILURE);
-		return 0;
-		}
-	
-	CRYPTO_add(&data->references,1,CRYPTO_LOCK_X509);
-#ifdef REF_PRINT
-	REF_PRINT("X509",data);
-#endif
-	object->data.x509.certificate = data;
-
-	i = s->meth->store_object(s, STORE_OBJECT_TYPE_X509_CERTIFICATE,
-		object, attributes, parameters);
-
-	STORE_OBJECT_free(object);
-
-	if (!i)
-		{
-		STOREerr(STORE_F_STORE_STORE_CERTIFICATE,
-			STORE_R_FAILED_STORING_CERTIFICATE);
-		return 0;
-		}
-	return 1;
-	}
-
-int STORE_modify_certificate(STORE *s, OPENSSL_ITEM search_attributes[],
-	OPENSSL_ITEM add_attributes[], OPENSSL_ITEM modify_attributes[],
-	OPENSSL_ITEM delete_attributes[], OPENSSL_ITEM parameters[])
-	{
-	check_store(s,STORE_F_STORE_MODIFY_CERTIFICATE,
-		modify_object,STORE_R_NO_MODIFY_OBJECT_FUNCTION);
-
-	if (!s->meth->modify_object(s, STORE_OBJECT_TYPE_X509_CERTIFICATE,
-		    search_attributes, add_attributes, modify_attributes,
-		    delete_attributes, parameters))
-		{
-		STOREerr(STORE_F_STORE_MODIFY_CERTIFICATE,
-			STORE_R_FAILED_MODIFYING_CERTIFICATE);
-		return 0;
-		}
-	return 1;
-	}
-
-int STORE_revoke_certificate(STORE *s, OPENSSL_ITEM attributes[],
-	OPENSSL_ITEM parameters[])
-	{
-	check_store(s,STORE_F_STORE_REVOKE_CERTIFICATE,
-		revoke_object,STORE_R_NO_REVOKE_OBJECT_FUNCTION);
-
-	if (!s->meth->revoke_object(s, STORE_OBJECT_TYPE_X509_CERTIFICATE,
-		    attributes, parameters))
-		{
-		STOREerr(STORE_F_STORE_REVOKE_CERTIFICATE,
-			STORE_R_FAILED_REVOKING_CERTIFICATE);
-		return 0;
-		}
-	return 1;
-	}
-
-int STORE_delete_certificate(STORE *s, OPENSSL_ITEM attributes[],
-	OPENSSL_ITEM parameters[])
-	{
-	check_store(s,STORE_F_STORE_DELETE_CERTIFICATE,
-		delete_object,STORE_R_NO_DELETE_OBJECT_FUNCTION);
-
-	if (!s->meth->delete_object(s, STORE_OBJECT_TYPE_X509_CERTIFICATE,
-		    attributes, parameters))
-		{
-		STOREerr(STORE_F_STORE_DELETE_CERTIFICATE,
-			STORE_R_FAILED_DELETING_CERTIFICATE);
-		return 0;
-		}
-	return 1;
-	}
-
-void *STORE_list_certificate_start(STORE *s, OPENSSL_ITEM attributes[],
-	OPENSSL_ITEM parameters[])
-	{
-	void *handle;
-
-	check_store(s,STORE_F_STORE_LIST_CERTIFICATE_START,
-		list_object_start,STORE_R_NO_LIST_OBJECT_START_FUNCTION);
-
-	handle = s->meth->list_object_start(s,
-		STORE_OBJECT_TYPE_X509_CERTIFICATE, attributes, parameters);
-	if (!handle)
-		{
-		STOREerr(STORE_F_STORE_LIST_CERTIFICATE_START,
-			STORE_R_FAILED_LISTING_CERTIFICATES);
-		return 0;
-		}
-	return handle;
-	}
-
-X509 *STORE_list_certificate_next(STORE *s, void *handle)
-	{
-	STORE_OBJECT *object;
-	X509 *x;
-
-	check_store(s,STORE_F_STORE_LIST_CERTIFICATE_NEXT,
-		list_object_next,STORE_R_NO_LIST_OBJECT_NEXT_FUNCTION);
-
-	object = s->meth->list_object_next(s, handle);
-	if (!object || !object->data.x509.certificate)
-		{
-		STOREerr(STORE_F_STORE_LIST_CERTIFICATE_NEXT,
-			STORE_R_FAILED_LISTING_CERTIFICATES);
-		return 0;
-		}
-	CRYPTO_add(&object->data.x509.certificate->references,1,CRYPTO_LOCK_X509);
-#ifdef REF_PRINT
-	REF_PRINT("X509",data);
-#endif
-	x = object->data.x509.certificate;
-	STORE_OBJECT_free(object);
-	return x;
-	}
-
-int STORE_list_certificate_end(STORE *s, void *handle)
-	{
-	check_store(s,STORE_F_STORE_LIST_CERTIFICATE_END,
-		list_object_end,STORE_R_NO_LIST_OBJECT_END_FUNCTION);
-
-	if (!s->meth->list_object_end(s, handle))
-		{
-		STOREerr(STORE_F_STORE_LIST_CERTIFICATE_END,
-			STORE_R_FAILED_LISTING_CERTIFICATES);
-		return 0;
-		}
-	return 1;
-	}
-
-int STORE_list_certificate_endp(STORE *s, void *handle)
-	{
-	check_store(s,STORE_F_STORE_LIST_CERTIFICATE_ENDP,
-		list_object_endp,STORE_R_NO_LIST_OBJECT_ENDP_FUNCTION);
-
-	if (!s->meth->list_object_endp(s, handle))
-		{
-		STOREerr(STORE_F_STORE_LIST_CERTIFICATE_ENDP,
-			STORE_R_FAILED_LISTING_CERTIFICATES);
-		return 0;
-		}
-	return 1;
-	}
-
-EVP_PKEY *STORE_generate_key(STORE *s, OPENSSL_ITEM attributes[],
-	OPENSSL_ITEM parameters[])
-	{
-	STORE_OBJECT *object;
-	EVP_PKEY *pkey;
-
-	check_store(s,STORE_F_STORE_GENERATE_KEY,
-		generate_object,STORE_R_NO_GENERATE_OBJECT_FUNCTION);
-
-	object = s->meth->generate_object(s, STORE_OBJECT_TYPE_PRIVATE_KEY,
-		attributes, parameters);
-	if (!object || !object->data.key)
-		{
-		STOREerr(STORE_F_STORE_GENERATE_KEY,
-			STORE_R_FAILED_GENERATING_KEY);
-		return 0;
-		}
-	CRYPTO_add(&object->data.key->references,1,CRYPTO_LOCK_EVP_PKEY);
-#ifdef REF_PRINT
-	REF_PRINT("EVP_PKEY",data);
-#endif
-	pkey = object->data.key;
-	STORE_OBJECT_free(object);
-	return pkey;
-	}
-
-EVP_PKEY *STORE_get_private_key(STORE *s, OPENSSL_ITEM attributes[],
-	OPENSSL_ITEM parameters[])
-	{
-	STORE_OBJECT *object;
-	EVP_PKEY *pkey;
-
-	check_store(s,STORE_F_STORE_GET_PRIVATE_KEY,
-		get_object,STORE_R_NO_GET_OBJECT_FUNCTION);
-
-	object = s->meth->get_object(s, STORE_OBJECT_TYPE_PRIVATE_KEY,
-		attributes, parameters);
-	if (!object || !object->data.key || !object->data.key)
-		{
-		STOREerr(STORE_F_STORE_GET_PRIVATE_KEY,
-			STORE_R_FAILED_GETTING_KEY);
-		return 0;
-		}
-	CRYPTO_add(&object->data.key->references,1,CRYPTO_LOCK_EVP_PKEY);
-#ifdef REF_PRINT
-	REF_PRINT("EVP_PKEY",data);
-#endif
-	pkey = object->data.key;
-	STORE_OBJECT_free(object);
-	return pkey;
-	}
-
-int STORE_store_private_key(STORE *s, EVP_PKEY *data, OPENSSL_ITEM attributes[],
-	OPENSSL_ITEM parameters[])
-	{
-	STORE_OBJECT *object;
-	int i;
-
-	check_store(s,STORE_F_STORE_STORE_PRIVATE_KEY,
-		store_object,STORE_R_NO_STORE_OBJECT_FUNCTION);
-
-	object = STORE_OBJECT_new();
-	if (!object)
-		{
-		STOREerr(STORE_F_STORE_STORE_PRIVATE_KEY,
-			ERR_R_MALLOC_FAILURE);
-		return 0;
-		}
-	object->data.key = EVP_PKEY_new();
-	if (!object->data.key)
-		{
-		STOREerr(STORE_F_STORE_STORE_PRIVATE_KEY,
-			ERR_R_MALLOC_FAILURE);
-		return 0;
-		}
-	
-	CRYPTO_add(&data->references,1,CRYPTO_LOCK_EVP_PKEY);
-#ifdef REF_PRINT
-	REF_PRINT("EVP_PKEY",data);
-#endif
-	object->data.key = data;
-
-	i = s->meth->store_object(s, STORE_OBJECT_TYPE_PRIVATE_KEY, object,
-		attributes, parameters);
-
-	STORE_OBJECT_free(object);
-
-	if (!i)
-		{
-		STOREerr(STORE_F_STORE_STORE_PRIVATE_KEY,
-			STORE_R_FAILED_STORING_KEY);
-		return 0;
-		}
-	return i;
-	}
-
-int STORE_modify_private_key(STORE *s, OPENSSL_ITEM search_attributes[],
-	OPENSSL_ITEM add_attributes[], OPENSSL_ITEM modify_attributes[],
-	OPENSSL_ITEM delete_attributes[], OPENSSL_ITEM parameters[])
-	{
-	check_store(s,STORE_F_STORE_MODIFY_PRIVATE_KEY,
-		modify_object,STORE_R_NO_MODIFY_OBJECT_FUNCTION);
-
-	if (!s->meth->modify_object(s, STORE_OBJECT_TYPE_PRIVATE_KEY,
-		    search_attributes, add_attributes, modify_attributes,
-		    delete_attributes, parameters))
-		{
-		STOREerr(STORE_F_STORE_MODIFY_PRIVATE_KEY,
-			STORE_R_FAILED_MODIFYING_PRIVATE_KEY);
-		return 0;
-		}
-	return 1;
-	}
-
-int STORE_revoke_private_key(STORE *s, OPENSSL_ITEM attributes[],
-	OPENSSL_ITEM parameters[])
-	{
-	int i;
-
-	check_store(s,STORE_F_STORE_REVOKE_PRIVATE_KEY,
-		revoke_object,STORE_R_NO_REVOKE_OBJECT_FUNCTION);
-
-	i = s->meth->revoke_object(s, STORE_OBJECT_TYPE_PRIVATE_KEY,
-		attributes, parameters);
-
-	if (!i)
-		{
-		STOREerr(STORE_F_STORE_REVOKE_PRIVATE_KEY,
-			STORE_R_FAILED_REVOKING_KEY);
-		return 0;
-		}
-	return i;
-	}
-
-int STORE_delete_private_key(STORE *s, OPENSSL_ITEM attributes[],
-	OPENSSL_ITEM parameters[])
-	{
-	check_store(s,STORE_F_STORE_DELETE_PRIVATE_KEY,
-		delete_object,STORE_R_NO_DELETE_OBJECT_FUNCTION);
-	
-	if (!s->meth->delete_object(s, STORE_OBJECT_TYPE_PRIVATE_KEY,
-		    attributes, parameters))
-		{
-		STOREerr(STORE_F_STORE_DELETE_PRIVATE_KEY,
-			STORE_R_FAILED_DELETING_KEY);
-		return 0;
-		}
-	return 1;
-	}
-
-void *STORE_list_private_key_start(STORE *s, OPENSSL_ITEM attributes[],
-	OPENSSL_ITEM parameters[])
-	{
-	void *handle;
-
-	check_store(s,STORE_F_STORE_LIST_PRIVATE_KEY_START,
-		list_object_start,STORE_R_NO_LIST_OBJECT_START_FUNCTION);
-
-	handle = s->meth->list_object_start(s, STORE_OBJECT_TYPE_PRIVATE_KEY,
-		attributes, parameters);
-	if (!handle)
-		{
-		STOREerr(STORE_F_STORE_LIST_PRIVATE_KEY_START,
-			STORE_R_FAILED_LISTING_KEYS);
-		return 0;
-		}
-	return handle;
-	}
-
-EVP_PKEY *STORE_list_private_key_next(STORE *s, void *handle)
-	{
-	STORE_OBJECT *object;
-	EVP_PKEY *pkey;
-
-	check_store(s,STORE_F_STORE_LIST_PRIVATE_KEY_NEXT,
-		list_object_next,STORE_R_NO_LIST_OBJECT_NEXT_FUNCTION);
-
-	object = s->meth->list_object_next(s, handle);
-	if (!object || !object->data.key || !object->data.key)
-		{
-		STOREerr(STORE_F_STORE_LIST_PRIVATE_KEY_NEXT,
-			STORE_R_FAILED_LISTING_KEYS);
-		return 0;
-		}
-	CRYPTO_add(&object->data.key->references,1,CRYPTO_LOCK_EVP_PKEY);
-#ifdef REF_PRINT
-	REF_PRINT("EVP_PKEY",data);
-#endif
-	pkey = object->data.key;
-	STORE_OBJECT_free(object);
-	return pkey;
-	}
-
-int STORE_list_private_key_end(STORE *s, void *handle)
-	{
-	check_store(s,STORE_F_STORE_LIST_PRIVATE_KEY_END,
-		list_object_end,STORE_R_NO_LIST_OBJECT_END_FUNCTION);
-
-	if (!s->meth->list_object_end(s, handle))
-		{
-		STOREerr(STORE_F_STORE_LIST_PRIVATE_KEY_END,
-			STORE_R_FAILED_LISTING_KEYS);
-		return 0;
-		}
-	return 1;
-	}
-
-int STORE_list_private_key_endp(STORE *s, void *handle)
-	{
-	check_store(s,STORE_F_STORE_LIST_PRIVATE_KEY_ENDP,
-		list_object_endp,STORE_R_NO_LIST_OBJECT_ENDP_FUNCTION);
-
-	if (!s->meth->list_object_endp(s, handle))
-		{
-		STOREerr(STORE_F_STORE_LIST_PRIVATE_KEY_ENDP,
-			STORE_R_FAILED_LISTING_KEYS);
-		return 0;
-		}
-	return 1;
-	}
-
-EVP_PKEY *STORE_get_public_key(STORE *s, OPENSSL_ITEM attributes[],
-	OPENSSL_ITEM parameters[])
-	{
-	STORE_OBJECT *object;
-	EVP_PKEY *pkey;
-
-	check_store(s,STORE_F_STORE_GET_PUBLIC_KEY,
-		get_object,STORE_R_NO_GET_OBJECT_FUNCTION);
-
-	object = s->meth->get_object(s, STORE_OBJECT_TYPE_PUBLIC_KEY,
-		attributes, parameters);
-	if (!object || !object->data.key || !object->data.key)
-		{
-		STOREerr(STORE_F_STORE_GET_PUBLIC_KEY,
-			STORE_R_FAILED_GETTING_KEY);
-		return 0;
-		}
-	CRYPTO_add(&object->data.key->references,1,CRYPTO_LOCK_EVP_PKEY);
-#ifdef REF_PRINT
-	REF_PRINT("EVP_PKEY",data);
-#endif
-	pkey = object->data.key;
-	STORE_OBJECT_free(object);
-	return pkey;
-	}
-
-int STORE_store_public_key(STORE *s, EVP_PKEY *data, OPENSSL_ITEM attributes[],
-	OPENSSL_ITEM parameters[])
-	{
-	STORE_OBJECT *object;
-	int i;
-
-	check_store(s,STORE_F_STORE_STORE_PUBLIC_KEY,
-		store_object,STORE_R_NO_STORE_OBJECT_FUNCTION);
-
-	object = STORE_OBJECT_new();
-	if (!object)
-		{
-		STOREerr(STORE_F_STORE_STORE_PUBLIC_KEY,
-			ERR_R_MALLOC_FAILURE);
-		return 0;
-		}
-	object->data.key = EVP_PKEY_new();
-	if (!object->data.key)
-		{
-		STOREerr(STORE_F_STORE_STORE_PUBLIC_KEY,
-			ERR_R_MALLOC_FAILURE);
-		return 0;
-		}
-	
-	CRYPTO_add(&data->references,1,CRYPTO_LOCK_EVP_PKEY);
-#ifdef REF_PRINT
-	REF_PRINT("EVP_PKEY",data);
-#endif
-	object->data.key = data;
-
-	i = s->meth->store_object(s, STORE_OBJECT_TYPE_PUBLIC_KEY, object,
-		attributes, parameters);
-
-	STORE_OBJECT_free(object);
-
-	if (!i)
-		{
-		STOREerr(STORE_F_STORE_STORE_PUBLIC_KEY,
-			STORE_R_FAILED_STORING_KEY);
-		return 0;
-		}
-	return i;
-	}
-
-int STORE_modify_public_key(STORE *s, OPENSSL_ITEM search_attributes[],
-	OPENSSL_ITEM add_attributes[], OPENSSL_ITEM modify_attributes[],
-	OPENSSL_ITEM delete_attributes[], OPENSSL_ITEM parameters[])
-	{
-	check_store(s,STORE_F_STORE_MODIFY_PUBLIC_KEY,
-		modify_object,STORE_R_NO_MODIFY_OBJECT_FUNCTION);
-
-	if (!s->meth->modify_object(s, STORE_OBJECT_TYPE_PUBLIC_KEY,
-		    search_attributes, add_attributes, modify_attributes,
-		    delete_attributes, parameters))
-		{
-		STOREerr(STORE_F_STORE_MODIFY_PUBLIC_KEY,
-			STORE_R_FAILED_MODIFYING_PUBLIC_KEY);
-		return 0;
-		}
-	return 1;
-	}
-
-int STORE_revoke_public_key(STORE *s, OPENSSL_ITEM attributes[],
-	OPENSSL_ITEM parameters[])
-	{
-	int i;
-
-	check_store(s,STORE_F_STORE_REVOKE_PUBLIC_KEY,
-		revoke_object,STORE_R_NO_REVOKE_OBJECT_FUNCTION);
-
-	i = s->meth->revoke_object(s, STORE_OBJECT_TYPE_PUBLIC_KEY,
-		attributes, parameters);
-
-	if (!i)
-		{
-		STOREerr(STORE_F_STORE_REVOKE_PUBLIC_KEY,
-			STORE_R_FAILED_REVOKING_KEY);
-		return 0;
-		}
-	return i;
-	}
-
-int STORE_delete_public_key(STORE *s, OPENSSL_ITEM attributes[],
-	OPENSSL_ITEM parameters[])
-	{
-	check_store(s,STORE_F_STORE_DELETE_PUBLIC_KEY,
-		delete_object,STORE_R_NO_DELETE_OBJECT_FUNCTION);
-	
-	if (!s->meth->delete_object(s, STORE_OBJECT_TYPE_PUBLIC_KEY,
-		    attributes, parameters))
-		{
-		STOREerr(STORE_F_STORE_DELETE_PUBLIC_KEY,
-			STORE_R_FAILED_DELETING_KEY);
-		return 0;
-		}
-	return 1;
-	}
-
-void *STORE_list_public_key_start(STORE *s, OPENSSL_ITEM attributes[],
-	OPENSSL_ITEM parameters[])
-	{
-	void *handle;
-
-	check_store(s,STORE_F_STORE_LIST_PUBLIC_KEY_START,
-		list_object_start,STORE_R_NO_LIST_OBJECT_START_FUNCTION);
-
-	handle = s->meth->list_object_start(s, STORE_OBJECT_TYPE_PUBLIC_KEY,
-		attributes, parameters);
-	if (!handle)
-		{
-		STOREerr(STORE_F_STORE_LIST_PUBLIC_KEY_START,
-			STORE_R_FAILED_LISTING_KEYS);
-		return 0;
-		}
-	return handle;
-	}
-
-EVP_PKEY *STORE_list_public_key_next(STORE *s, void *handle)
-	{
-	STORE_OBJECT *object;
-	EVP_PKEY *pkey;
-
-	check_store(s,STORE_F_STORE_LIST_PUBLIC_KEY_NEXT,
-		list_object_next,STORE_R_NO_LIST_OBJECT_NEXT_FUNCTION);
-
-	object = s->meth->list_object_next(s, handle);
-	if (!object || !object->data.key || !object->data.key)
-		{
-		STOREerr(STORE_F_STORE_LIST_PUBLIC_KEY_NEXT,
-			STORE_R_FAILED_LISTING_KEYS);
-		return 0;
-		}
-	CRYPTO_add(&object->data.key->references,1,CRYPTO_LOCK_EVP_PKEY);
-#ifdef REF_PRINT
-	REF_PRINT("EVP_PKEY",data);
-#endif
-	pkey = object->data.key;
-	STORE_OBJECT_free(object);
-	return pkey;
-	}
-
-int STORE_list_public_key_end(STORE *s, void *handle)
-	{
-	check_store(s,STORE_F_STORE_LIST_PUBLIC_KEY_END,
-		list_object_end,STORE_R_NO_LIST_OBJECT_END_FUNCTION);
-
-	if (!s->meth->list_object_end(s, handle))
-		{
-		STOREerr(STORE_F_STORE_LIST_PUBLIC_KEY_END,
-			STORE_R_FAILED_LISTING_KEYS);
-		return 0;
-		}
-	return 1;
-	}
-
-int STORE_list_public_key_endp(STORE *s, void *handle)
-	{
-	check_store(s,STORE_F_STORE_LIST_PUBLIC_KEY_ENDP,
-		list_object_endp,STORE_R_NO_LIST_OBJECT_ENDP_FUNCTION);
-
-	if (!s->meth->list_object_endp(s, handle))
-		{
-		STOREerr(STORE_F_STORE_LIST_PUBLIC_KEY_ENDP,
-			STORE_R_FAILED_LISTING_KEYS);
-		return 0;
-		}
-	return 1;
-	}
-
-X509_CRL *STORE_generate_crl(STORE *s, OPENSSL_ITEM attributes[],
-	OPENSSL_ITEM parameters[])
-	{
-	STORE_OBJECT *object;
-	X509_CRL *crl;
-
-	check_store(s,STORE_F_STORE_GENERATE_CRL,
-		generate_object,STORE_R_NO_GENERATE_CRL_FUNCTION);
-
-	object = s->meth->generate_object(s, STORE_OBJECT_TYPE_X509_CRL,
-		attributes, parameters);
-	if (!object || !object->data.crl)
-		{
-		STOREerr(STORE_F_STORE_GENERATE_CRL,
-			STORE_R_FAILED_GENERATING_CRL);
-		return 0;
-		}
-	CRYPTO_add(&object->data.crl->references,1,CRYPTO_LOCK_X509_CRL);
-#ifdef REF_PRINT
-	REF_PRINT("X509_CRL",data);
-#endif
-	crl = object->data.crl;
-	STORE_OBJECT_free(object);
-	return crl;
-	}
-
-X509_CRL *STORE_get_crl(STORE *s, OPENSSL_ITEM attributes[],
-	OPENSSL_ITEM parameters[])
-	{
-	STORE_OBJECT *object;
-	X509_CRL *crl;
-
-	check_store(s,STORE_F_STORE_GET_CRL,
-		get_object,STORE_R_NO_GET_OBJECT_FUNCTION);
-
-	object = s->meth->get_object(s, STORE_OBJECT_TYPE_X509_CRL,
-		attributes, parameters);
-	if (!object || !object->data.crl)
-		{
-		STOREerr(STORE_F_STORE_GET_CRL,
-			STORE_R_FAILED_GETTING_KEY);
-		return 0;
-		}
-	CRYPTO_add(&object->data.crl->references,1,CRYPTO_LOCK_X509_CRL);
-#ifdef REF_PRINT
-	REF_PRINT("X509_CRL",data);
-#endif
-	crl = object->data.crl;
-	STORE_OBJECT_free(object);
-	return crl;
-	}
-
-int STORE_store_crl(STORE *s, X509_CRL *data, OPENSSL_ITEM attributes[],
-	OPENSSL_ITEM parameters[])
-	{
-	STORE_OBJECT *object;
-	int i;
-
-	check_store(s,STORE_F_STORE_STORE_CRL,
-		store_object,STORE_R_NO_STORE_OBJECT_FUNCTION);
-
-	object = STORE_OBJECT_new();
-	if (!object)
-		{
-		STOREerr(STORE_F_STORE_STORE_CRL,
-			ERR_R_MALLOC_FAILURE);
-		return 0;
-		}
-	
-	CRYPTO_add(&data->references,1,CRYPTO_LOCK_X509_CRL);
-#ifdef REF_PRINT
-	REF_PRINT("X509_CRL",data);
-#endif
-	object->data.crl = data;
-
-	i = s->meth->store_object(s, STORE_OBJECT_TYPE_X509_CRL, object,
-		attributes, parameters);
-
-	STORE_OBJECT_free(object);
-
-	if (!i)
-		{
-		STOREerr(STORE_F_STORE_STORE_CRL,
-			STORE_R_FAILED_STORING_KEY);
-		return 0;
-		}
-	return i;
-	}
-
-int STORE_modify_crl(STORE *s, OPENSSL_ITEM search_attributes[],
-	OPENSSL_ITEM add_attributes[], OPENSSL_ITEM modify_attributes[],
-	OPENSSL_ITEM delete_attributes[], OPENSSL_ITEM parameters[])
-	{
-	check_store(s,STORE_F_STORE_MODIFY_CRL,
-		modify_object,STORE_R_NO_MODIFY_OBJECT_FUNCTION);
-
-	if (!s->meth->modify_object(s, STORE_OBJECT_TYPE_X509_CRL,
-		    search_attributes, add_attributes, modify_attributes,
-		    delete_attributes, parameters))
-		{
-		STOREerr(STORE_F_STORE_MODIFY_CRL,
-			STORE_R_FAILED_MODIFYING_CRL);
-		return 0;
-		}
-	return 1;
-	}
-
-int STORE_delete_crl(STORE *s, OPENSSL_ITEM attributes[],
-	OPENSSL_ITEM parameters[])
-	{
-	check_store(s,STORE_F_STORE_DELETE_CRL,
-		delete_object,STORE_R_NO_DELETE_OBJECT_FUNCTION);
-	
-	if (!s->meth->delete_object(s, STORE_OBJECT_TYPE_X509_CRL,
-		    attributes, parameters))
-		{
-		STOREerr(STORE_F_STORE_DELETE_CRL,
-			STORE_R_FAILED_DELETING_KEY);
-		return 0;
-		}
-	return 1;
-	}
-
-void *STORE_list_crl_start(STORE *s, OPENSSL_ITEM attributes[],
-	OPENSSL_ITEM parameters[])
-	{
-	void *handle;
-
-	check_store(s,STORE_F_STORE_LIST_CRL_START,
-		list_object_start,STORE_R_NO_LIST_OBJECT_START_FUNCTION);
-
-	handle = s->meth->list_object_start(s, STORE_OBJECT_TYPE_X509_CRL,
-		attributes, parameters);
-	if (!handle)
-		{
-		STOREerr(STORE_F_STORE_LIST_CRL_START,
-			STORE_R_FAILED_LISTING_KEYS);
-		return 0;
-		}
-	return handle;
-	}
-
-X509_CRL *STORE_list_crl_next(STORE *s, void *handle)
-	{
-	STORE_OBJECT *object;
-	X509_CRL *crl;
-
-	check_store(s,STORE_F_STORE_LIST_CRL_NEXT,
-		list_object_next,STORE_R_NO_LIST_OBJECT_NEXT_FUNCTION);
-
-	object = s->meth->list_object_next(s, handle);
-	if (!object || !object->data.crl)
-		{
-		STOREerr(STORE_F_STORE_LIST_CRL_NEXT,
-			STORE_R_FAILED_LISTING_KEYS);
-		return 0;
-		}
-	CRYPTO_add(&object->data.crl->references,1,CRYPTO_LOCK_X509_CRL);
-#ifdef REF_PRINT
-	REF_PRINT("X509_CRL",data);
-#endif
-	crl = object->data.crl;
-	STORE_OBJECT_free(object);
-	return crl;
-	}
-
-int STORE_list_crl_end(STORE *s, void *handle)
-	{
-	check_store(s,STORE_F_STORE_LIST_CRL_END,
-		list_object_end,STORE_R_NO_LIST_OBJECT_END_FUNCTION);
-
-	if (!s->meth->list_object_end(s, handle))
-		{
-		STOREerr(STORE_F_STORE_LIST_CRL_END,
-			STORE_R_FAILED_LISTING_KEYS);
-		return 0;
-		}
-	return 1;
-	}
-
-int STORE_list_crl_endp(STORE *s, void *handle)
-	{
-	check_store(s,STORE_F_STORE_LIST_CRL_ENDP,
-		list_object_endp,STORE_R_NO_LIST_OBJECT_ENDP_FUNCTION);
-
-	if (!s->meth->list_object_endp(s, handle))
-		{
-		STOREerr(STORE_F_STORE_LIST_CRL_ENDP,
-			STORE_R_FAILED_LISTING_KEYS);
-		return 0;
-		}
-	return 1;
-	}
-
-int STORE_store_number(STORE *s, BIGNUM *data, OPENSSL_ITEM attributes[],
-	OPENSSL_ITEM parameters[])
-	{
-	STORE_OBJECT *object;
-	int i;
-
-	check_store(s,STORE_F_STORE_STORE_NUMBER,
-		store_object,STORE_R_NO_STORE_OBJECT_NUMBER_FUNCTION);
-
-	object = STORE_OBJECT_new();
-	if (!object)
-		{
-		STOREerr(STORE_F_STORE_STORE_NUMBER,
-			ERR_R_MALLOC_FAILURE);
-		return 0;
-		}
-	
-	object->data.number = data;
-
-	i = s->meth->store_object(s, STORE_OBJECT_TYPE_NUMBER, object,
-		attributes, parameters);
-
-	STORE_OBJECT_free(object);
-
-	if (!i)
-		{
-		STOREerr(STORE_F_STORE_STORE_NUMBER,
-			STORE_R_FAILED_STORING_NUMBER);
-		return 0;
-		}
-	return 1;
-	}
-
-int STORE_modify_number(STORE *s, OPENSSL_ITEM search_attributes[],
-	OPENSSL_ITEM add_attributes[], OPENSSL_ITEM modify_attributes[],
-	OPENSSL_ITEM delete_attributes[], OPENSSL_ITEM parameters[])
-	{
-	check_store(s,STORE_F_STORE_MODIFY_NUMBER,
-		modify_object,STORE_R_NO_MODIFY_OBJECT_FUNCTION);
-
-	if (!s->meth->modify_object(s, STORE_OBJECT_TYPE_NUMBER,
-		    search_attributes, add_attributes, modify_attributes,
-		    delete_attributes, parameters))
-		{
-		STOREerr(STORE_F_STORE_MODIFY_NUMBER,
-			STORE_R_FAILED_MODIFYING_NUMBER);
-		return 0;
-		}
-	return 1;
-	}
-
-BIGNUM *STORE_get_number(STORE *s, OPENSSL_ITEM attributes[],
-	OPENSSL_ITEM parameters[])
-	{
-	STORE_OBJECT *object;
-	BIGNUM *n;
-
-	check_store(s,STORE_F_STORE_GET_NUMBER,
-		get_object,STORE_R_NO_GET_OBJECT_NUMBER_FUNCTION);
-
-	object = s->meth->get_object(s, STORE_OBJECT_TYPE_NUMBER, attributes,
-		parameters);
-	if (!object || !object->data.number)
-		{
-		STOREerr(STORE_F_STORE_GET_NUMBER,
-			STORE_R_FAILED_GETTING_NUMBER);
-		return 0;
-		}
-	n = object->data.number;
-	object->data.number = NULL;
-	STORE_OBJECT_free(object);
-	return n;
-	}
-
-int STORE_delete_number(STORE *s, OPENSSL_ITEM attributes[],
-	OPENSSL_ITEM parameters[])
-	{
-	check_store(s,STORE_F_STORE_DELETE_NUMBER,
-		delete_object,STORE_R_NO_DELETE_NUMBER_FUNCTION);
-
-	if (!s->meth->delete_object(s, STORE_OBJECT_TYPE_NUMBER, attributes,
-		    parameters))
-		{
-		STOREerr(STORE_F_STORE_DELETE_NUMBER,
-			STORE_R_FAILED_DELETING_NUMBER);
-		return 0;
-		}
-	return 1;
-	}
-
-int STORE_store_arbitrary(STORE *s, BUF_MEM *data, OPENSSL_ITEM attributes[],
-	OPENSSL_ITEM parameters[])
-	{
-	STORE_OBJECT *object;
-	int i;
-
-	check_store(s,STORE_F_STORE_STORE_ARBITRARY,
-		store_object,STORE_R_NO_STORE_OBJECT_ARBITRARY_FUNCTION);
-
-	object = STORE_OBJECT_new();
-	if (!object)
-		{
-		STOREerr(STORE_F_STORE_STORE_ARBITRARY,
-			ERR_R_MALLOC_FAILURE);
-		return 0;
-		}
-	
-	object->data.arbitrary = data;
-
-	i = s->meth->store_object(s, STORE_OBJECT_TYPE_ARBITRARY, object,
-		attributes, parameters);
-
-	STORE_OBJECT_free(object);
-
-	if (!i)
-		{
-		STOREerr(STORE_F_STORE_STORE_ARBITRARY,
-			STORE_R_FAILED_STORING_ARBITRARY);
-		return 0;
-		}
-	return 1;
-	}
-
-int STORE_modify_arbitrary(STORE *s, OPENSSL_ITEM search_attributes[],
-	OPENSSL_ITEM add_attributes[], OPENSSL_ITEM modify_attributes[],
-	OPENSSL_ITEM delete_attributes[], OPENSSL_ITEM parameters[])
-	{
-	check_store(s,STORE_F_STORE_MODIFY_ARBITRARY,
-		modify_object,STORE_R_NO_MODIFY_OBJECT_FUNCTION);
-
-	if (!s->meth->modify_object(s, STORE_OBJECT_TYPE_ARBITRARY,
-		    search_attributes, add_attributes, modify_attributes,
-		    delete_attributes, parameters))
-		{
-		STOREerr(STORE_F_STORE_MODIFY_ARBITRARY,
-			STORE_R_FAILED_MODIFYING_ARBITRARY);
-		return 0;
-		}
-	return 1;
-	}
-
-BUF_MEM *STORE_get_arbitrary(STORE *s, OPENSSL_ITEM attributes[],
-	OPENSSL_ITEM parameters[])
-	{
-	STORE_OBJECT *object;
-	BUF_MEM *b;
-
-	check_store(s,STORE_F_STORE_GET_ARBITRARY,
-		get_object,STORE_R_NO_GET_OBJECT_ARBITRARY_FUNCTION);
-
-	object = s->meth->get_object(s, STORE_OBJECT_TYPE_ARBITRARY,
-		attributes, parameters);
-	if (!object || !object->data.arbitrary)
-		{
-		STOREerr(STORE_F_STORE_GET_ARBITRARY,
-			STORE_R_FAILED_GETTING_ARBITRARY);
-		return 0;
-		}
-	b = object->data.arbitrary;
-	object->data.arbitrary = NULL;
-	STORE_OBJECT_free(object);
-	return b;
-	}
-
-int STORE_delete_arbitrary(STORE *s, OPENSSL_ITEM attributes[],
-	OPENSSL_ITEM parameters[])
-	{
-	check_store(s,STORE_F_STORE_DELETE_ARBITRARY,
-		delete_object,STORE_R_NO_DELETE_ARBITRARY_FUNCTION);
-
-	if (!s->meth->delete_object(s, STORE_OBJECT_TYPE_ARBITRARY, attributes,
-		    parameters))
-		{
-		STOREerr(STORE_F_STORE_DELETE_ARBITRARY,
-			STORE_R_FAILED_DELETING_ARBITRARY);
-		return 0;
-		}
-	return 1;
-	}
-
-STORE_OBJECT *STORE_OBJECT_new(void)
-	{
-	STORE_OBJECT *object = OPENSSL_malloc(sizeof(STORE_OBJECT));
-	if (object) memset(object, 0, sizeof(STORE_OBJECT));
-	return object;
-	}
-void STORE_OBJECT_free(STORE_OBJECT *data)
-	{
-	if (!data) return;
-	switch (data->type)
-		{
-	case STORE_OBJECT_TYPE_X509_CERTIFICATE:
-		X509_free(data->data.x509.certificate);
-		break;
-	case STORE_OBJECT_TYPE_X509_CRL:
-		X509_CRL_free(data->data.crl);
-		break;
-	case STORE_OBJECT_TYPE_PRIVATE_KEY:
-	case STORE_OBJECT_TYPE_PUBLIC_KEY:
-		EVP_PKEY_free(data->data.key);
-		break;
-	case STORE_OBJECT_TYPE_NUMBER:
-		BN_free(data->data.number);
-		break;
-	case STORE_OBJECT_TYPE_ARBITRARY:
-		BUF_MEM_free(data->data.arbitrary);
-		break;
-		}
-	OPENSSL_free(data);
-	}
-
-IMPLEMENT_STACK_OF(STORE_OBJECT*)
-
-
-struct STORE_attr_info_st
-	{
-	unsigned char set[(STORE_ATTR_TYPE_NUM + 8) / 8];
-	union
-		{
-		char *cstring;
-		unsigned char *sha1string;
-		X509_NAME *dn;
-		BIGNUM *number;
-		void *any;
-		} values[STORE_ATTR_TYPE_NUM+1];
-	size_t value_sizes[STORE_ATTR_TYPE_NUM+1];
-	};
-
-#define ATTR_IS_SET(a,i)	((i) > 0 && (i) < STORE_ATTR_TYPE_NUM \
-				&& ((a)->set[(i) / 8] & (1 << ((i) % 8))))
-#define SET_ATTRBIT(a,i)	((a)->set[(i) / 8] |= (1 << ((i) % 8)))
-#define CLEAR_ATTRBIT(a,i)	((a)->set[(i) / 8] &= ~(1 << ((i) % 8)))
-
-STORE_ATTR_INFO *STORE_ATTR_INFO_new(void)
-	{
-	return (STORE_ATTR_INFO *)OPENSSL_malloc(sizeof(STORE_ATTR_INFO));
-	}
-static void STORE_ATTR_INFO_attr_free(STORE_ATTR_INFO *attrs,
-	STORE_ATTR_TYPES code)
-	{
-	if (ATTR_IS_SET(attrs,code))
-		{
-		switch(code)
-			{
-		case STORE_ATTR_FRIENDLYNAME:
-		case STORE_ATTR_EMAIL:
-		case STORE_ATTR_FILENAME:
-			STORE_ATTR_INFO_modify_cstr(attrs, code, NULL, 0);
-			break;
-		case STORE_ATTR_KEYID:
-		case STORE_ATTR_ISSUERKEYID:
-		case STORE_ATTR_SUBJECTKEYID:
-		case STORE_ATTR_ISSUERSERIALHASH:
-		case STORE_ATTR_CERTHASH:
-			STORE_ATTR_INFO_modify_sha1str(attrs, code, NULL, 0);
-			break;
-		case STORE_ATTR_ISSUER:
-		case STORE_ATTR_SUBJECT:
-			STORE_ATTR_INFO_modify_dn(attrs, code, NULL);
-			break;
-		case STORE_ATTR_SERIAL:
-			STORE_ATTR_INFO_modify_number(attrs, code, NULL);
-			break;
-		default:
-			break;
-			}
-		}
-	}
-int STORE_ATTR_INFO_free(STORE_ATTR_INFO *attrs)
-	{
-	if (attrs)
-		{
-		STORE_ATTR_TYPES i;
-		for(i = 0; i++ < STORE_ATTR_TYPE_NUM;)
-			STORE_ATTR_INFO_attr_free(attrs, i);
-		OPENSSL_free(attrs);
-		}
-	return 1;
-	}
-char *STORE_ATTR_INFO_get0_cstr(STORE_ATTR_INFO *attrs, STORE_ATTR_TYPES code)
-	{
-	if (!attrs)
-		{
-		STOREerr(STORE_F_STORE_ATTR_INFO_GET0_CSTR,
-			ERR_R_PASSED_NULL_PARAMETER);
-		return NULL;
-		}
-	if (ATTR_IS_SET(attrs,code))
-		return attrs->values[code].cstring;
-	STOREerr(STORE_F_STORE_ATTR_INFO_GET0_CSTR,
-		STORE_R_NO_VALUE);
-	return NULL;
-	}
-unsigned char *STORE_ATTR_INFO_get0_sha1str(STORE_ATTR_INFO *attrs,
-	STORE_ATTR_TYPES code)
-	{
-	if (!attrs)
-		{
-		STOREerr(STORE_F_STORE_ATTR_INFO_GET0_SHA1STR,
-			ERR_R_PASSED_NULL_PARAMETER);
-		return NULL;
-		}
-	if (ATTR_IS_SET(attrs,code))
-		return attrs->values[code].sha1string;
-	STOREerr(STORE_F_STORE_ATTR_INFO_GET0_SHA1STR,
-		STORE_R_NO_VALUE);
-	return NULL;
-	}
-X509_NAME *STORE_ATTR_INFO_get0_dn(STORE_ATTR_INFO *attrs, STORE_ATTR_TYPES code)
-	{
-	if (!attrs)
-		{
-		STOREerr(STORE_F_STORE_ATTR_INFO_GET0_DN,
-			ERR_R_PASSED_NULL_PARAMETER);
-		return NULL;
-		}
-	if (ATTR_IS_SET(attrs,code))
-		return attrs->values[code].dn;
-	STOREerr(STORE_F_STORE_ATTR_INFO_GET0_DN,
-		STORE_R_NO_VALUE);
-	return NULL;
-	}
-BIGNUM *STORE_ATTR_INFO_get0_number(STORE_ATTR_INFO *attrs, STORE_ATTR_TYPES code)
-	{
-	if (!attrs)
-		{
-		STOREerr(STORE_F_STORE_ATTR_INFO_GET0_NUMBER,
-			ERR_R_PASSED_NULL_PARAMETER);
-		return NULL;
-		}
-	if (ATTR_IS_SET(attrs,code))
-		return attrs->values[code].number;
-	STOREerr(STORE_F_STORE_ATTR_INFO_GET0_NUMBER,
-		STORE_R_NO_VALUE);
-	return NULL;
-	}
-int STORE_ATTR_INFO_set_cstr(STORE_ATTR_INFO *attrs, STORE_ATTR_TYPES code,
-	char *cstr, size_t cstr_size)
-	{
-	if (!attrs)
-		{
-		STOREerr(STORE_F_STORE_ATTR_INFO_SET_CSTR,
-			ERR_R_PASSED_NULL_PARAMETER);
-		return 0;
-		}
-	if (!ATTR_IS_SET(attrs,code))
-		{
-		if ((attrs->values[code].cstring = BUF_strndup(cstr, cstr_size)))
-			return 1;
-		STOREerr(STORE_F_STORE_ATTR_INFO_SET_CSTR,
-			ERR_R_MALLOC_FAILURE);
-		return 0;
-		}
-	STOREerr(STORE_F_STORE_ATTR_INFO_SET_CSTR, STORE_R_ALREADY_HAS_A_VALUE);
-	return 0;
-	}
-int STORE_ATTR_INFO_set_sha1str(STORE_ATTR_INFO *attrs, STORE_ATTR_TYPES code,
-	unsigned char *sha1str, size_t sha1str_size)
-	{
-	if (!attrs)
-		{
-		STOREerr(STORE_F_STORE_ATTR_INFO_SET_SHA1STR,
-			ERR_R_PASSED_NULL_PARAMETER);
-		return 0;
-		}
-	if (!ATTR_IS_SET(attrs,code))
-		{
-		if ((attrs->values[code].sha1string =
-			    (unsigned char *)BUF_memdup(sha1str,
-				    sha1str_size)))
-			return 1;
-		STOREerr(STORE_F_STORE_ATTR_INFO_SET_SHA1STR,
-			ERR_R_MALLOC_FAILURE);
-		return 0;
-		}
-	STOREerr(STORE_F_STORE_ATTR_INFO_SET_SHA1STR, STORE_R_ALREADY_HAS_A_VALUE);
-	return 0;
-	}
-int STORE_ATTR_INFO_set_dn(STORE_ATTR_INFO *attrs, STORE_ATTR_TYPES code,
-	X509_NAME *dn)
-	{
-	if (!attrs)
-		{
-		STOREerr(STORE_F_STORE_ATTR_INFO_SET_DN,
-			ERR_R_PASSED_NULL_PARAMETER);
-		return 0;
-		}
-	if (!ATTR_IS_SET(attrs,code))
-		{
-		if ((attrs->values[code].dn = X509_NAME_dup(dn)))
-			return 1;
-		STOREerr(STORE_F_STORE_ATTR_INFO_SET_DN,
-			ERR_R_MALLOC_FAILURE);
-		return 0;
-		}
-	STOREerr(STORE_F_STORE_ATTR_INFO_SET_DN, STORE_R_ALREADY_HAS_A_VALUE);
-	return 0;
-	}
-int STORE_ATTR_INFO_set_number(STORE_ATTR_INFO *attrs, STORE_ATTR_TYPES code,
-	BIGNUM *number)
-	{
-	if (!attrs)
-		{
-		STOREerr(STORE_F_STORE_ATTR_INFO_SET_NUMBER,
-			ERR_R_PASSED_NULL_PARAMETER);
-		return 0;
-		}
-	if (!ATTR_IS_SET(attrs,code))
-		{
-		if ((attrs->values[code].number = BN_dup(number)))
-			return 1;
-		STOREerr(STORE_F_STORE_ATTR_INFO_SET_NUMBER,
-			ERR_R_MALLOC_FAILURE);
-		return 0;
-		}
-	STOREerr(STORE_F_STORE_ATTR_INFO_SET_NUMBER, STORE_R_ALREADY_HAS_A_VALUE);
-	return 0;
-	}
-int STORE_ATTR_INFO_modify_cstr(STORE_ATTR_INFO *attrs, STORE_ATTR_TYPES code,
-	char *cstr, size_t cstr_size)
-	{
-	if (!attrs)
-		{
-		STOREerr(STORE_F_STORE_ATTR_INFO_MODIFY_CSTR,
-			ERR_R_PASSED_NULL_PARAMETER);
-		return 0;
-		}
-	if (ATTR_IS_SET(attrs,code))
-		{
-		OPENSSL_free(attrs->values[code].cstring);
-		attrs->values[code].cstring = NULL;
-		CLEAR_ATTRBIT(attrs, code);
-		}
-	return STORE_ATTR_INFO_set_cstr(attrs, code, cstr, cstr_size);
-	}
-int STORE_ATTR_INFO_modify_sha1str(STORE_ATTR_INFO *attrs, STORE_ATTR_TYPES code,
-	unsigned char *sha1str, size_t sha1str_size)
-	{
-	if (!attrs)
-		{
-		STOREerr(STORE_F_STORE_ATTR_INFO_MODIFY_SHA1STR,
-			ERR_R_PASSED_NULL_PARAMETER);
-		return 0;
-		}
-	if (ATTR_IS_SET(attrs,code))
-		{
-		OPENSSL_free(attrs->values[code].sha1string);
-		attrs->values[code].sha1string = NULL;
-		CLEAR_ATTRBIT(attrs, code);
-		}
-	return STORE_ATTR_INFO_set_sha1str(attrs, code, sha1str, sha1str_size);
-	}
-int STORE_ATTR_INFO_modify_dn(STORE_ATTR_INFO *attrs, STORE_ATTR_TYPES code,
-	X509_NAME *dn)
-	{
-	if (!attrs)
-		{
-		STOREerr(STORE_F_STORE_ATTR_INFO_MODIFY_DN,
-			ERR_R_PASSED_NULL_PARAMETER);
-		return 0;
-		}
-	if (ATTR_IS_SET(attrs,code))
-		{
-		OPENSSL_free(attrs->values[code].dn);
-		attrs->values[code].dn = NULL;
-		CLEAR_ATTRBIT(attrs, code);
-		}
-	return STORE_ATTR_INFO_set_dn(attrs, code, dn);
-	}
-int STORE_ATTR_INFO_modify_number(STORE_ATTR_INFO *attrs, STORE_ATTR_TYPES code,
-	BIGNUM *number)
-	{
-	if (!attrs)
-		{
-		STOREerr(STORE_F_STORE_ATTR_INFO_MODIFY_NUMBER,
-			ERR_R_PASSED_NULL_PARAMETER);
-		return 0;
-		}
-	if (ATTR_IS_SET(attrs,code))
-		{
-		OPENSSL_free(attrs->values[code].number);
-		attrs->values[code].number = NULL;
-		CLEAR_ATTRBIT(attrs, code);
-		}
-	return STORE_ATTR_INFO_set_number(attrs, code, number);
-	}
-
-struct attr_list_ctx_st
-	{
-	OPENSSL_ITEM *attributes;
-	};
-void *STORE_parse_attrs_start(OPENSSL_ITEM *attributes)
-	{
-	if (attributes)
-		{
-		struct attr_list_ctx_st *context =
-			(struct attr_list_ctx_st *)OPENSSL_malloc(sizeof(struct attr_list_ctx_st));
-		if (context)
-			context->attributes = attributes;
-		else
-			STOREerr(STORE_F_STORE_PARSE_ATTRS_START,
-				ERR_R_MALLOC_FAILURE);
-		return context;
-		}
-	STOREerr(STORE_F_STORE_PARSE_ATTRS_START, ERR_R_PASSED_NULL_PARAMETER);
-	return 0;
-	}
-STORE_ATTR_INFO *STORE_parse_attrs_next(void *handle)
-	{
-	struct attr_list_ctx_st *context = (struct attr_list_ctx_st *)handle;
-
-	if (context && context->attributes)
-		{
-		STORE_ATTR_INFO *attrs = NULL;
-
-		while(context->attributes
-			&& context->attributes->code != STORE_ATTR_OR
-			&& context->attributes->code != STORE_ATTR_END)
-			{
-			switch(context->attributes->code)
-				{
-			case STORE_ATTR_FRIENDLYNAME:
-			case STORE_ATTR_EMAIL:
-			case STORE_ATTR_FILENAME:
-				if (!attrs) attrs = STORE_ATTR_INFO_new();
-				if (attrs == NULL)
-					{
-					STOREerr(STORE_F_STORE_PARSE_ATTRS_NEXT,
-						ERR_R_MALLOC_FAILURE);
-					goto err;
-					}
-				STORE_ATTR_INFO_set_cstr(attrs,
-					context->attributes->code,
-					context->attributes->value,
-					context->attributes->value_size);
-				break;
-			case STORE_ATTR_KEYID:
-			case STORE_ATTR_ISSUERKEYID:
-			case STORE_ATTR_SUBJECTKEYID:
-			case STORE_ATTR_ISSUERSERIALHASH:
-			case STORE_ATTR_CERTHASH:
-				if (!attrs) attrs = STORE_ATTR_INFO_new();
-				if (attrs == NULL)
-					{
-					STOREerr(STORE_F_STORE_PARSE_ATTRS_NEXT,
-						ERR_R_MALLOC_FAILURE);
-					goto err;
-					}
-				STORE_ATTR_INFO_set_sha1str(attrs,
-					context->attributes->code,
-					context->attributes->value,
-					context->attributes->value_size);
-				break;
-			case STORE_ATTR_ISSUER:
-			case STORE_ATTR_SUBJECT:
-				if (!attrs) attrs = STORE_ATTR_INFO_new();
-				if (attrs == NULL)
-					{
-					STOREerr(STORE_F_STORE_PARSE_ATTRS_NEXT,
-						ERR_R_MALLOC_FAILURE);
-					goto err;
-					}
-				STORE_ATTR_INFO_modify_dn(attrs,
-					context->attributes->code,
-					context->attributes->value);
-				break;
-			case STORE_ATTR_SERIAL:
-				if (!attrs) attrs = STORE_ATTR_INFO_new();
-				if (attrs == NULL)
-					{
-					STOREerr(STORE_F_STORE_PARSE_ATTRS_NEXT,
-						ERR_R_MALLOC_FAILURE);
-					goto err;
-					}
-				STORE_ATTR_INFO_modify_number(attrs,
-					context->attributes->code,
-					context->attributes->value);
-				break;
-				}
-			context->attributes++;
-			}
-		if (context->attributes->code == STORE_ATTR_OR)
-			context->attributes++;
-		return attrs;
-	err:
-		while(context->attributes
-			&& context->attributes->code != STORE_ATTR_OR
-			&& context->attributes->code != STORE_ATTR_END)
-			context->attributes++;
-		if (context->attributes->code == STORE_ATTR_OR)
-			context->attributes++;
-		return NULL;
-		}
-	STOREerr(STORE_F_STORE_PARSE_ATTRS_NEXT, ERR_R_PASSED_NULL_PARAMETER);
-	return NULL;
-	}
-int STORE_parse_attrs_end(void *handle)
-	{
-	struct attr_list_ctx_st *context = (struct attr_list_ctx_st *)handle;
-
-	if (context && context->attributes)
-		{
-#if 0
-		OPENSSL_ITEM *attributes = context->attributes;
-#endif
-		OPENSSL_free(context);
-		return 1;
-		}
-	STOREerr(STORE_F_STORE_PARSE_ATTRS_END, ERR_R_PASSED_NULL_PARAMETER);
-	return 0;
-	}
-
-int STORE_parse_attrs_endp(void *handle)
-	{
-	struct attr_list_ctx_st *context = (struct attr_list_ctx_st *)handle;
-
-	if (context && context->attributes)
-		{
-		return context->attributes->code == STORE_ATTR_END;
-		}
-	STOREerr(STORE_F_STORE_PARSE_ATTRS_ENDP, ERR_R_PASSED_NULL_PARAMETER);
-	return 0;
-	}
-
-static int attr_info_compare_compute_range(
-	unsigned char *abits, unsigned char *bbits,
-	unsigned int *alowp, unsigned int *ahighp,
-	unsigned int *blowp, unsigned int *bhighp)
-	{
-	unsigned int alow = (unsigned int)-1, ahigh = 0;
-	unsigned int blow = (unsigned int)-1, bhigh = 0;
-	int i, res = 0;
-
-	for (i = 0; i < (STORE_ATTR_TYPE_NUM + 8) / 8; i++, abits++, bbits++)
-		{
-		if (res == 0)
-			{
-			if (*abits < *bbits) res = -1;
-			if (*abits > *bbits) res = 1;
-			}
-		if (*abits)
-			{
-			if (alow == (unsigned int)-1)
-				{
-				alow = i * 8;
-				if (!(*abits & 0x01)) alow++;
-				if (!(*abits & 0x02)) alow++;
-				if (!(*abits & 0x04)) alow++;
-				if (!(*abits & 0x08)) alow++;
-				if (!(*abits & 0x10)) alow++;
-				if (!(*abits & 0x20)) alow++;
-				if (!(*abits & 0x40)) alow++;
-				}
-			ahigh = i * 8 + 7;
-			if (!(*abits & 0x80)) ahigh++;
-			if (!(*abits & 0x40)) ahigh++;
-			if (!(*abits & 0x20)) ahigh++;
-			if (!(*abits & 0x10)) ahigh++;
-			if (!(*abits & 0x08)) ahigh++;
-			if (!(*abits & 0x04)) ahigh++;
-			if (!(*abits & 0x02)) ahigh++;
-			}
-		if (*bbits)
-			{
-			if (blow == (unsigned int)-1)
-				{
-				blow = i * 8;
-				if (!(*bbits & 0x01)) blow++;
-				if (!(*bbits & 0x02)) blow++;
-				if (!(*bbits & 0x04)) blow++;
-				if (!(*bbits & 0x08)) blow++;
-				if (!(*bbits & 0x10)) blow++;
-				if (!(*bbits & 0x20)) blow++;
-				if (!(*bbits & 0x40)) blow++;
-				}
-			bhigh = i * 8 + 7;
-			if (!(*bbits & 0x80)) bhigh++;
-			if (!(*bbits & 0x40)) bhigh++;
-			if (!(*bbits & 0x20)) bhigh++;
-			if (!(*bbits & 0x10)) bhigh++;
-			if (!(*bbits & 0x08)) bhigh++;
-			if (!(*bbits & 0x04)) bhigh++;
-			if (!(*bbits & 0x02)) bhigh++;
-			}
-		}
-	if (ahigh + alow < bhigh + blow) res = -1;
-	if (ahigh + alow > bhigh + blow) res = 1;
-	if (alowp) *alowp = alow;
-	if (ahighp) *ahighp = ahigh;
-	if (blowp) *blowp = blow;
-	if (bhighp) *bhighp = bhigh;
-	return res;
-	}
-
-int STORE_ATTR_INFO_compare(STORE_ATTR_INFO *a, STORE_ATTR_INFO *b)
-	{
-	if (a == b) return 0;
-	if (!a) return -1;
-	if (!b) return 1;
-	return attr_info_compare_compute_range(a->set, b->set, 0, 0, 0, 0);
-	}
-int STORE_ATTR_INFO_in_range(STORE_ATTR_INFO *a, STORE_ATTR_INFO *b)
-	{
-	unsigned int alow, ahigh, blow, bhigh;
-
-	if (a == b) return 1;
-	if (!a) return 0;
-	if (!b) return 0;
-	attr_info_compare_compute_range(a->set, b->set,
-		&alow, &ahigh, &blow, &bhigh);
-	if (alow >= blow && ahigh <= bhigh)
-		return 1;
-	return 0;
-	}
-int STORE_ATTR_INFO_in(STORE_ATTR_INFO *a, STORE_ATTR_INFO *b)
-	{
-	unsigned char *abits, *bbits;
-	int i;
-
-	if (a == b) return 1;
-	if (!a) return 0;
-	if (!b) return 0;
-	abits = a->set;
-	bbits = b->set;
-	for (i = 0; i < (STORE_ATTR_TYPE_NUM + 8) / 8; i++, abits++, bbits++)
-		{
-		if (*abits && (*bbits & *abits) != *abits)
-			return 0;
-		}
-	return 1;
-	}
-int STORE_ATTR_INFO_in_ex(STORE_ATTR_INFO *a, STORE_ATTR_INFO *b)
-	{
-	STORE_ATTR_TYPES i;
-
-	if (a == b) return 1;
-	if (!STORE_ATTR_INFO_in(a, b)) return 0;
-	for (i = 1; i < STORE_ATTR_TYPE_NUM; i++)
-		if (ATTR_IS_SET(a, i))
-			{
-			switch(i)
-				{
-			case STORE_ATTR_FRIENDLYNAME:
-			case STORE_ATTR_EMAIL:
-			case STORE_ATTR_FILENAME:
-				if (strcmp(a->values[i].cstring,
-					    b->values[i].cstring))
-					return 0;
-				break;
-			case STORE_ATTR_KEYID:
-			case STORE_ATTR_ISSUERKEYID:
-			case STORE_ATTR_SUBJECTKEYID:
-			case STORE_ATTR_ISSUERSERIALHASH:
-			case STORE_ATTR_CERTHASH:
-				if (memcmp(a->values[i].sha1string,
-					    b->values[i].sha1string,
-					    a->value_sizes[i]))
-					return 0;
-				break;
-			case STORE_ATTR_ISSUER:
-			case STORE_ATTR_SUBJECT:
-				if (X509_NAME_cmp(a->values[i].dn,
-					    b->values[i].dn))
-					return 0;
-				break;
-			case STORE_ATTR_SERIAL:
-				if (BN_cmp(a->values[i].number,
-					    b->values[i].number))
-					return 0;
-				break;
-			default:
-				break;
-				}
-			}
-
-	return 1;
-	}
diff --git a/crypto/openssl/crypto/store/str_locl.h b/crypto/openssl/crypto/store/str_locl.h
deleted file mode 100644
index 3f8cb75619c7..000000000000
--- a/crypto/openssl/crypto/store/str_locl.h
+++ /dev/null
@@ -1,124 +0,0 @@
-/* crypto/store/str_locl.h -*- mode:C; c-file-style: "eay" -*- */
-/* Written by Richard Levitte (richard@levitte.org) for the OpenSSL
- * project 2003.
- */
-/* ====================================================================
- * Copyright (c) 2003 The OpenSSL Project.  All rights reserved.
- *
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions
- * are met:
- *
- * 1. Redistributions of source code must retain the above copyright
- *    notice, this list of conditions and the following disclaimer. 
- *
- * 2. Redistributions in binary form must reproduce the above copyright
- *    notice, this list of conditions and the following disclaimer in
- *    the documentation and/or other materials provided with the
- *    distribution.
- *
- * 3. All advertising materials mentioning features or use of this
- *    software must display the following acknowledgment:
- *    "This product includes software developed by the OpenSSL Project
- *    for use in the OpenSSL Toolkit. (http://www.openssl.org/)"
- *
- * 4. The names "OpenSSL Toolkit" and "OpenSSL Project" must not be used to
- *    endorse or promote products derived from this software without
- *    prior written permission. For written permission, please contact
- *    openssl-core@openssl.org.
- *
- * 5. Products derived from this software may not be called "OpenSSL"
- *    nor may "OpenSSL" appear in their names without prior written
- *    permission of the OpenSSL Project.
- *
- * 6. Redistributions of any form whatsoever must retain the following
- *    acknowledgment:
- *    "This product includes software developed by the OpenSSL Project
- *    for use in the OpenSSL Toolkit (http://www.openssl.org/)"
- *
- * THIS SOFTWARE IS PROVIDED BY THE OpenSSL PROJECT ``AS IS'' AND ANY
- * EXPRESSED OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
- * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR
- * PURPOSE ARE DISCLAIMED.  IN NO EVENT SHALL THE OpenSSL PROJECT OR
- * ITS CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
- * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
- * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
- * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
- * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
- * STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
- * ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED
- * OF THE POSSIBILITY OF SUCH DAMAGE.
- * ====================================================================
- *
- * This product includes cryptographic software written by Eric Young
- * (eay@cryptsoft.com).  This product includes software written by Tim
- * Hudson (tjh@cryptsoft.com).
- *
- */
-
-#ifndef HEADER_STORE_LOCL_H
-#define HEADER_STORE_LOCL_H
-
-#include <openssl/crypto.h>
-#include <openssl/store.h>
-
-#ifdef  __cplusplus
-extern "C" {
-#endif
-
-struct store_method_st
-	{
-	char *name;
-
-	/* All the functions return a positive integer or non-NULL for success
-	   and 0, a negative integer or NULL for failure */
-
-	/* Initialise the STORE with private data */
-	STORE_INITIALISE_FUNC_PTR init;
-	/* Initialise the STORE with private data */
-	STORE_CLEANUP_FUNC_PTR clean;
-	/* Generate an object of a given type */
-	STORE_GENERATE_OBJECT_FUNC_PTR generate_object;
-	/* Get an object of a given type.  This function isn't really very
-	   useful since the listing functions (below) can be used for the
-	   same purpose and are much more general. */
-	STORE_GET_OBJECT_FUNC_PTR get_object;
-	/* Store an object of a given type. */
-	STORE_STORE_OBJECT_FUNC_PTR store_object;
-	/* Modify the attributes bound to an object of a given type. */
-	STORE_MODIFY_OBJECT_FUNC_PTR modify_object;
-	/* Revoke an object of a given type. */
-	STORE_HANDLE_OBJECT_FUNC_PTR revoke_object;
-	/* Delete an object of a given type. */
-	STORE_HANDLE_OBJECT_FUNC_PTR delete_object;
-	/* List a bunch of objects of a given type and with the associated
-	   attributes. */
-	STORE_START_OBJECT_FUNC_PTR list_object_start;
-	STORE_NEXT_OBJECT_FUNC_PTR list_object_next;
-	STORE_END_OBJECT_FUNC_PTR list_object_end;
-	STORE_END_OBJECT_FUNC_PTR list_object_endp;
-	/* Store-level function to make any necessary update operations. */
-	STORE_GENERIC_FUNC_PTR update_store;
-	/* Store-level function to get exclusive access to the store. */
-	STORE_GENERIC_FUNC_PTR lock_store;
-	/* Store-level function to release exclusive access to the store. */
-	STORE_GENERIC_FUNC_PTR unlock_store;
-
-	/* Generic control function */
-	STORE_CTRL_FUNC_PTR ctrl;
-	};
-
-struct store_st
-	{
-	const STORE_METHOD *meth;
-	/* functional reference if 'meth' is ENGINE-provided */
-	ENGINE *engine;
-
-	CRYPTO_EX_DATA ex_data;
-	int references;
-	};
-#ifdef  __cplusplus
-}
-#endif
-
-#endif
diff --git a/crypto/openssl/crypto/store/str_mem.c b/crypto/openssl/crypto/store/str_mem.c
deleted file mode 100644
index 527757ae0990..000000000000
--- a/crypto/openssl/crypto/store/str_mem.c
+++ /dev/null
@@ -1,357 +0,0 @@
-/* crypto/store/str_mem.c -*- mode:C; c-file-style: "eay" -*- */
-/* Written by Richard Levitte (richard@levitte.org) for the OpenSSL
- * project 2003.
- */
-/* ====================================================================
- * Copyright (c) 2003 The OpenSSL Project.  All rights reserved.
- *
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions
- * are met:
- *
- * 1. Redistributions of source code must retain the above copyright
- *    notice, this list of conditions and the following disclaimer. 
- *
- * 2. Redistributions in binary form must reproduce the above copyright
- *    notice, this list of conditions and the following disclaimer in
- *    the documentation and/or other materials provided with the
- *    distribution.
- *
- * 3. All advertising materials mentioning features or use of this
- *    software must display the following acknowledgment:
- *    "This product includes software developed by the OpenSSL Project
- *    for use in the OpenSSL Toolkit. (http://www.openssl.org/)"
- *
- * 4. The names "OpenSSL Toolkit" and "OpenSSL Project" must not be used to
- *    endorse or promote products derived from this software without
- *    prior written permission. For written permission, please contact
- *    openssl-core@openssl.org.
- *
- * 5. Products derived from this software may not be called "OpenSSL"
- *    nor may "OpenSSL" appear in their names without prior written
- *    permission of the OpenSSL Project.
- *
- * 6. Redistributions of any form whatsoever must retain the following
- *    acknowledgment:
- *    "This product includes software developed by the OpenSSL Project
- *    for use in the OpenSSL Toolkit (http://www.openssl.org/)"
- *
- * THIS SOFTWARE IS PROVIDED BY THE OpenSSL PROJECT ``AS IS'' AND ANY
- * EXPRESSED OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
- * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR
- * PURPOSE ARE DISCLAIMED.  IN NO EVENT SHALL THE OpenSSL PROJECT OR
- * ITS CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
- * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
- * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
- * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
- * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
- * STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
- * ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED
- * OF THE POSSIBILITY OF SUCH DAMAGE.
- * ====================================================================
- *
- * This product includes cryptographic software written by Eric Young
- * (eay@cryptsoft.com).  This product includes software written by Tim
- * Hudson (tjh@cryptsoft.com).
- *
- */
-
-#include <string.h>
-#include <openssl/err.h>
-#include "str_locl.h"
-
-/* The memory store is currently highly experimental.  It's meant to become
-   a base store used by other stores for internal caching (for full caching
-   support, aging needs to be added).
-
-   The database use is meant to support as much attribute association as
-   possible, while providing for as small search ranges as possible.
-   This is currently provided for by sorting the entries by numbers that
-   are composed of bits set at the positions indicated by attribute type
-   codes.  This provides for ranges determined by the highest attribute
-   type code value.  A better idea might be to sort by values computed
-   from the range of attributes associated with the object (basically,
-   the difference between the highest and lowest attribute type code)
-   and it's distance from a base (basically, the lowest associated
-   attribute type code).
-*/
-
-struct mem_object_data_st
-	{
-	STORE_OBJECT *object;
-	STORE_ATTR_INFO *attr_info;
-	int references;
-	};
-
-struct mem_data_st
-	{
-	STACK *data;		/* A stack of mem_object_data_st,
-				   sorted with STORE_ATTR_INFO_compare(). */
-	unsigned int compute_components : 1; /* Currently unused, but can
-						be used to add attributes
-						from parts of the data. */
-	};
-
-struct mem_ctx_st
-	{
-	int type;		/* The type we're searching for */
-	STACK *search_attributes; /* Sets of attributes to search for.
-				     Each element is a STORE_ATTR_INFO. */
-	int search_index;	/* which of the search attributes we found a match
-				   for, -1 when we still haven't found any */
-	int index;		/* -1 as long as we're searching for the first */
-	};
-
-static int mem_init(STORE *s);
-static void mem_clean(STORE *s);
-static STORE_OBJECT *mem_generate(STORE *s, STORE_OBJECT_TYPES type,
-	OPENSSL_ITEM attributes[], OPENSSL_ITEM parameters[]);
-static STORE_OBJECT *mem_get(STORE *s, STORE_OBJECT_TYPES type,
-	OPENSSL_ITEM attributes[], OPENSSL_ITEM parameters[]);
-static int mem_store(STORE *s, STORE_OBJECT_TYPES type,
-	STORE_OBJECT *data, OPENSSL_ITEM attributes[],
-	OPENSSL_ITEM parameters[]);
-static int mem_modify(STORE *s, STORE_OBJECT_TYPES type,
-	OPENSSL_ITEM search_attributes[], OPENSSL_ITEM add_attributes[],
-	OPENSSL_ITEM modify_attributes[], OPENSSL_ITEM delete_attributes[],
-	OPENSSL_ITEM parameters[]);
-static int mem_delete(STORE *s, STORE_OBJECT_TYPES type,
-	OPENSSL_ITEM attributes[], OPENSSL_ITEM parameters[]);
-static void *mem_list_start(STORE *s, STORE_OBJECT_TYPES type,
-	OPENSSL_ITEM attributes[], OPENSSL_ITEM parameters[]);
-static STORE_OBJECT *mem_list_next(STORE *s, void *handle);
-static int mem_list_end(STORE *s, void *handle);
-static int mem_list_endp(STORE *s, void *handle);
-static int mem_lock(STORE *s, OPENSSL_ITEM attributes[],
-	OPENSSL_ITEM parameters[]);
-static int mem_unlock(STORE *s, OPENSSL_ITEM attributes[],
-	OPENSSL_ITEM parameters[]);
-static int mem_ctrl(STORE *s, int cmd, long l, void *p, void (*f)(void));
-
-static STORE_METHOD store_memory =
-	{
-	"OpenSSL memory store interface",
-	mem_init,
-	mem_clean,
-	mem_generate,
-	mem_get,
-	mem_store,
-	mem_modify,
-	NULL, /* revoke */
-	mem_delete,
-	mem_list_start,
-	mem_list_next,
-	mem_list_end,
-	mem_list_endp,
-	NULL, /* update */
-	mem_lock,
-	mem_unlock,
-	mem_ctrl
-	};
-
-const STORE_METHOD *STORE_Memory(void)
-	{
-	return &store_memory;
-	}
-
-static int mem_init(STORE *s)
-	{
-	return 1;
-	}
-
-static void mem_clean(STORE *s)
-	{
-	return;
-	}
-
-static STORE_OBJECT *mem_generate(STORE *s, STORE_OBJECT_TYPES type,
-	OPENSSL_ITEM attributes[], OPENSSL_ITEM parameters[])
-	{
-	STOREerr(STORE_F_MEM_GENERATE, STORE_R_NOT_IMPLEMENTED);
-	return 0;
-	}
-static STORE_OBJECT *mem_get(STORE *s, STORE_OBJECT_TYPES type,
-	OPENSSL_ITEM attributes[], OPENSSL_ITEM parameters[])
-	{
-	void *context = mem_list_start(s, type, attributes, parameters);
-	
-	if (context)
-		{
-		STORE_OBJECT *object = mem_list_next(s, context);
-
-		if (mem_list_end(s, context))
-			return object;
-		}
-	return NULL;
-	}
-static int mem_store(STORE *s, STORE_OBJECT_TYPES type,
-	STORE_OBJECT *data, OPENSSL_ITEM attributes[],
-	OPENSSL_ITEM parameters[])
-	{
-	STOREerr(STORE_F_MEM_STORE, STORE_R_NOT_IMPLEMENTED);
-	return 0;
-	}
-static int mem_modify(STORE *s, STORE_OBJECT_TYPES type,
-	OPENSSL_ITEM search_attributes[], OPENSSL_ITEM add_attributes[],
-	OPENSSL_ITEM modify_attributes[], OPENSSL_ITEM delete_attributes[],
-	OPENSSL_ITEM parameters[])
-	{
-	STOREerr(STORE_F_MEM_MODIFY, STORE_R_NOT_IMPLEMENTED);
-	return 0;
-	}
-static int mem_delete(STORE *s, STORE_OBJECT_TYPES type,
-	OPENSSL_ITEM attributes[], OPENSSL_ITEM parameters[])
-	{
-	STOREerr(STORE_F_MEM_DELETE, STORE_R_NOT_IMPLEMENTED);
-	return 0;
-	}
-
-/* The list functions may be the hardest to understand.  Basically,
-   mem_list_start compiles a stack of attribute info elements, and
-   puts that stack into the context to be returned.  mem_list_next
-   will then find the first matching element in the store, and then
-   walk all the way to the end of the store (since any combination
-   of attribute bits above the starting point may match the searched
-   for bit pattern...). */
-static void *mem_list_start(STORE *s, STORE_OBJECT_TYPES type,
-	OPENSSL_ITEM attributes[], OPENSSL_ITEM parameters[])
-	{
-	struct mem_ctx_st *context =
-		(struct mem_ctx_st *)OPENSSL_malloc(sizeof(struct mem_ctx_st));
-	void *attribute_context = NULL;
-	STORE_ATTR_INFO *attrs = NULL;
-
-	if (!context)
-		{
-		STOREerr(STORE_F_MEM_LIST_START, ERR_R_MALLOC_FAILURE);
-		return 0;
-		}
-	memset(context, 0, sizeof(struct mem_ctx_st));
-
-	attribute_context = STORE_parse_attrs_start(attributes);
-	if (!attribute_context)
-		{
-		STOREerr(STORE_F_MEM_LIST_START, ERR_R_STORE_LIB);
-		goto err;
-		}
-
-	while((attrs = STORE_parse_attrs_next(attribute_context)))
-		{
-		if (context->search_attributes == NULL)
-			{
-			context->search_attributes =
-				sk_new((int (*)(const char * const *, const char * const *))STORE_ATTR_INFO_compare);
-			if (!context->search_attributes)
-				{
-				STOREerr(STORE_F_MEM_LIST_START,
-					ERR_R_MALLOC_FAILURE);
-				goto err;
-				}
-			}
-		sk_push(context->search_attributes,(char *)attrs);
-		}
-	if (!STORE_parse_attrs_endp(attribute_context))
-		goto err;
-	STORE_parse_attrs_end(attribute_context);
-	context->search_index = -1;
-	context->index = -1;
-	return context;
- err:
-	if (attribute_context) STORE_parse_attrs_end(attribute_context);
-	mem_list_end(s, context);
-	return NULL;
-	}
-static STORE_OBJECT *mem_list_next(STORE *s, void *handle)
-	{
-	int i;
-	struct mem_ctx_st *context = (struct mem_ctx_st *)handle;
-	struct mem_object_data_st key = { 0, 0, 1 };
-	struct mem_data_st *store =
-		(struct mem_data_st *)STORE_get_ex_data(s, 1);
-	int srch;
-	int cres = 0;
-
-	if (!context)
-		{
-		STOREerr(STORE_F_MEM_LIST_NEXT, ERR_R_PASSED_NULL_PARAMETER);
-		return NULL;
-		}
-	if (!store)
-		{
-		STOREerr(STORE_F_MEM_LIST_NEXT, STORE_R_NO_STORE);
-		return NULL;
-		}
-
-	if (context->search_index == -1)
-		{
-		for (i = 0; i < sk_num(context->search_attributes); i++)
-			{
-			key.attr_info =
-				(STORE_ATTR_INFO *)sk_value(context->search_attributes, i);
-			srch = sk_find_ex(store->data, (char *)&key);
-
-			if (srch >= 0)
-				{
-				context->search_index = srch;
-				break;
-				}
-			}
-		}
-	if (context->search_index < 0)
-		return NULL;
-	
-	key.attr_info =
-		(STORE_ATTR_INFO *)sk_value(context->search_attributes,
-			context->search_index);
-	for(srch = context->search_index;
-	    srch < sk_num(store->data)
-		    && STORE_ATTR_INFO_in_range(key.attr_info,
-			    (STORE_ATTR_INFO *)sk_value(store->data, srch))
-		    && !(cres = STORE_ATTR_INFO_in_ex(key.attr_info,
-				 (STORE_ATTR_INFO *)sk_value(store->data, srch)));
-	    srch++)
-		;
-
-	context->search_index = srch;
-	if (cres)
-		return ((struct mem_object_data_st *)sk_value(store->data,
-				srch))->object;
-	return NULL;
-	}
-static int mem_list_end(STORE *s, void *handle)
-	{
-	struct mem_ctx_st *context = (struct mem_ctx_st *)handle;
-
-	if (!context)
-		{
-		STOREerr(STORE_F_MEM_LIST_END, ERR_R_PASSED_NULL_PARAMETER);
-		return 0;
-		}
-	if (context && context->search_attributes)
-		sk_free(context->search_attributes);
-	if (context) OPENSSL_free(context);
-	return 1;
-	}
-static int mem_list_endp(STORE *s, void *handle)
-	{
-	struct mem_ctx_st *context = (struct mem_ctx_st *)handle;
-
-	if (!context
-		|| context->search_index == sk_num(context->search_attributes))
-		return 1;
-	return 0;
-	}
-static int mem_lock(STORE *s, OPENSSL_ITEM attributes[],
-	OPENSSL_ITEM parameters[])
-	{
-	return 1;
-	}
-static int mem_unlock(STORE *s, OPENSSL_ITEM attributes[],
-	OPENSSL_ITEM parameters[])
-	{
-	return 1;
-	}
-static int mem_ctrl(STORE *s, int cmd, long l, void *p, void (*f)(void))
-	{
-	return 1;
-	}
diff --git a/crypto/openssl/crypto/store/str_meth.c b/crypto/openssl/crypto/store/str_meth.c
deleted file mode 100644
index a46de03a2600..000000000000
--- a/crypto/openssl/crypto/store/str_meth.c
+++ /dev/null
@@ -1,250 +0,0 @@
-/* crypto/store/str_meth.c -*- mode:C; c-file-style: "eay" -*- */
-/* Written by Richard Levitte (richard@levitte.org) for the OpenSSL
- * project 2003.
- */
-/* ====================================================================
- * Copyright (c) 2003 The OpenSSL Project.  All rights reserved.
- *
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions
- * are met:
- *
- * 1. Redistributions of source code must retain the above copyright
- *    notice, this list of conditions and the following disclaimer. 
- *
- * 2. Redistributions in binary form must reproduce the above copyright
- *    notice, this list of conditions and the following disclaimer in
- *    the documentation and/or other materials provided with the
- *    distribution.
- *
- * 3. All advertising materials mentioning features or use of this
- *    software must display the following acknowledgment:
- *    "This product includes software developed by the OpenSSL Project
- *    for use in the OpenSSL Toolkit. (http://www.openssl.org/)"
- *
- * 4. The names "OpenSSL Toolkit" and "OpenSSL Project" must not be used to
- *    endorse or promote products derived from this software without
- *    prior written permission. For written permission, please contact
- *    openssl-core@openssl.org.
- *
- * 5. Products derived from this software may not be called "OpenSSL"
- *    nor may "OpenSSL" appear in their names without prior written
- *    permission of the OpenSSL Project.
- *
- * 6. Redistributions of any form whatsoever must retain the following
- *    acknowledgment:
- *    "This product includes software developed by the OpenSSL Project
- *    for use in the OpenSSL Toolkit (http://www.openssl.org/)"
- *
- * THIS SOFTWARE IS PROVIDED BY THE OpenSSL PROJECT ``AS IS'' AND ANY
- * EXPRESSED OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
- * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR
- * PURPOSE ARE DISCLAIMED.  IN NO EVENT SHALL THE OpenSSL PROJECT OR
- * ITS CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
- * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
- * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
- * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
- * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
- * STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
- * ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED
- * OF THE POSSIBILITY OF SUCH DAMAGE.
- * ====================================================================
- *
- * This product includes cryptographic software written by Eric Young
- * (eay@cryptsoft.com).  This product includes software written by Tim
- * Hudson (tjh@cryptsoft.com).
- *
- */
-
-#include <string.h>
-#include <openssl/buffer.h>
-#include "str_locl.h"
-
-STORE_METHOD *STORE_create_method(char *name)
-	{
-	STORE_METHOD *store_method = (STORE_METHOD *)OPENSSL_malloc(sizeof(STORE_METHOD));
-
-	if (store_method)
-		{
-		memset(store_method, 0, sizeof(*store_method));
-		store_method->name = BUF_strdup(name);
-		}
-	return store_method;
-	}
-
-/* BIG FSCKING WARNING!!!!  If you use this on a statically allocated method
-   (that is, it hasn't been allocated using STORE_create_method(), you deserve
-   anything Murphy can throw at you and more!  You have been warned. */
-void STORE_destroy_method(STORE_METHOD *store_method)
-	{
-	if (!store_method) return;
-	OPENSSL_free(store_method->name);
-	store_method->name = NULL;
-	OPENSSL_free(store_method);
-	}
-
-int STORE_method_set_initialise_function(STORE_METHOD *sm, STORE_INITIALISE_FUNC_PTR init_f)
-	{
-	sm->init = init_f;
-	return 1;
-	}
-
-int STORE_method_set_cleanup_function(STORE_METHOD *sm, STORE_CLEANUP_FUNC_PTR clean_f)
-	{
-	sm->clean = clean_f;
-	return 1;
-	}
-
-int STORE_method_set_generate_function(STORE_METHOD *sm, STORE_GENERATE_OBJECT_FUNC_PTR generate_f)
-	{
-	sm->generate_object = generate_f;
-	return 1;
-	}
-
-int STORE_method_set_get_function(STORE_METHOD *sm, STORE_GET_OBJECT_FUNC_PTR get_f)
-	{
-	sm->get_object = get_f;
-	return 1;
-	}
-
-int STORE_method_set_store_function(STORE_METHOD *sm, STORE_STORE_OBJECT_FUNC_PTR store_f)
-	{
-	sm->store_object = store_f;
-	return 1;
-	}
-
-int STORE_method_set_modify_function(STORE_METHOD *sm, STORE_MODIFY_OBJECT_FUNC_PTR modify_f)
-	{
-	sm->modify_object = modify_f;
-	return 1;
-	}
-
-int STORE_method_set_revoke_function(STORE_METHOD *sm, STORE_HANDLE_OBJECT_FUNC_PTR revoke_f)
-	{
-	sm->revoke_object = revoke_f;
-	return 1;
-	}
-
-int STORE_method_set_delete_function(STORE_METHOD *sm, STORE_HANDLE_OBJECT_FUNC_PTR delete_f)
-	{
-	sm->delete_object = delete_f;
-	return 1;
-	}
-
-int STORE_method_set_list_start_function(STORE_METHOD *sm, STORE_START_OBJECT_FUNC_PTR list_start_f)
-	{
-	sm->list_object_start = list_start_f;
-	return 1;
-	}
-
-int STORE_method_set_list_next_function(STORE_METHOD *sm, STORE_NEXT_OBJECT_FUNC_PTR list_next_f)
-	{
-	sm->list_object_next = list_next_f;
-	return 1;
-	}
-
-int STORE_method_set_list_end_function(STORE_METHOD *sm, STORE_END_OBJECT_FUNC_PTR list_end_f)
-	{
-	sm->list_object_end = list_end_f;
-	return 1;
-	}
-
-int STORE_method_set_update_store_function(STORE_METHOD *sm, STORE_GENERIC_FUNC_PTR update_f)
-	{
-	sm->update_store = update_f;
-	return 1;
-	}
-
-int STORE_method_set_lock_store_function(STORE_METHOD *sm, STORE_GENERIC_FUNC_PTR lock_f)
-	{
-	sm->lock_store = lock_f;
-	return 1;
-	}
-
-int STORE_method_set_unlock_store_function(STORE_METHOD *sm, STORE_GENERIC_FUNC_PTR unlock_f)
-	{
-	sm->unlock_store = unlock_f;
-	return 1;
-	}
-
-int STORE_method_set_ctrl_function(STORE_METHOD *sm, STORE_CTRL_FUNC_PTR ctrl_f)
-	{
-	sm->ctrl = ctrl_f;
-	return 1;
-	}
-
-STORE_INITIALISE_FUNC_PTR STORE_method_get_initialise_function(STORE_METHOD *sm)
-	{
-	return sm->init;
-	}
-
-STORE_CLEANUP_FUNC_PTR STORE_method_get_cleanup_function(STORE_METHOD *sm)
-	{
-	return sm->clean;
-	}
-
-STORE_GENERATE_OBJECT_FUNC_PTR STORE_method_get_generate_function(STORE_METHOD *sm)
-	{
-	return sm->generate_object;
-	}
-
-STORE_GET_OBJECT_FUNC_PTR STORE_method_get_get_function(STORE_METHOD *sm)
-	{
-	return sm->get_object;
-	}
-
-STORE_STORE_OBJECT_FUNC_PTR STORE_method_get_store_function(STORE_METHOD *sm)
-	{
-	return sm->store_object;
-	}
-
-STORE_MODIFY_OBJECT_FUNC_PTR STORE_method_get_modify_function(STORE_METHOD *sm)
-	{
-	return sm->modify_object;
-	}
-
-STORE_HANDLE_OBJECT_FUNC_PTR STORE_method_get_revoke_function(STORE_METHOD *sm)
-	{
-	return sm->revoke_object;
-	}
-
-STORE_HANDLE_OBJECT_FUNC_PTR STORE_method_get_delete_function(STORE_METHOD *sm)
-	{
-	return sm->delete_object;
-	}
-
-STORE_START_OBJECT_FUNC_PTR STORE_method_get_list_start_function(STORE_METHOD *sm)
-	{
-	return sm->list_object_start;
-	}
-
-STORE_NEXT_OBJECT_FUNC_PTR STORE_method_get_list_next_function(STORE_METHOD *sm)
-	{
-	return sm->list_object_next;
-	}
-
-STORE_END_OBJECT_FUNC_PTR STORE_method_get_list_end_function(STORE_METHOD *sm)
-	{
-	return sm->list_object_end;
-	}
-
-STORE_GENERIC_FUNC_PTR STORE_method_get_update_store_function(STORE_METHOD *sm)
-	{
-	return sm->update_store;
-	}
-
-STORE_GENERIC_FUNC_PTR STORE_method_get_lock_store_function(STORE_METHOD *sm)
-	{
-	return sm->lock_store;
-	}
-
-STORE_GENERIC_FUNC_PTR STORE_method_get_unlock_store_function(STORE_METHOD *sm)
-	{
-	return sm->unlock_store;
-	}
-
-STORE_CTRL_FUNC_PTR STORE_method_get_ctrl_function(STORE_METHOD *sm)
-	{
-	return sm->ctrl;
-	}
-
diff --git a/crypto/openssl/crypto/symhacks.h b/crypto/openssl/crypto/symhacks.h
deleted file mode 100644
index 7e3602d2ea43..000000000000
--- a/crypto/openssl/crypto/symhacks.h
+++ /dev/null
@@ -1,383 +0,0 @@
-/* ====================================================================
- * Copyright (c) 1999 The OpenSSL Project.  All rights reserved.
- *
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions
- * are met:
- *
- * 1. Redistributions of source code must retain the above copyright
- *    notice, this list of conditions and the following disclaimer. 
- *
- * 2. Redistributions in binary form must reproduce the above copyright
- *    notice, this list of conditions and the following disclaimer in
- *    the documentation and/or other materials provided with the
- *    distribution.
- *
- * 3. All advertising materials mentioning features or use of this
- *    software must display the following acknowledgment:
- *    "This product includes software developed by the OpenSSL Project
- *    for use in the OpenSSL Toolkit. (http://www.openssl.org/)"
- *
- * 4. The names "OpenSSL Toolkit" and "OpenSSL Project" must not be used to
- *    endorse or promote products derived from this software without
- *    prior written permission. For written permission, please contact
- *    openssl-core@openssl.org.
- *
- * 5. Products derived from this software may not be called "OpenSSL"
- *    nor may "OpenSSL" appear in their names without prior written
- *    permission of the OpenSSL Project.
- *
- * 6. Redistributions of any form whatsoever must retain the following
- *    acknowledgment:
- *    "This product includes software developed by the OpenSSL Project
- *    for use in the OpenSSL Toolkit (http://www.openssl.org/)"
- *
- * THIS SOFTWARE IS PROVIDED BY THE OpenSSL PROJECT ``AS IS'' AND ANY
- * EXPRESSED OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
- * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR
- * PURPOSE ARE DISCLAIMED.  IN NO EVENT SHALL THE OpenSSL PROJECT OR
- * ITS CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
- * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
- * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
- * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
- * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
- * STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
- * ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED
- * OF THE POSSIBILITY OF SUCH DAMAGE.
- * ====================================================================
- *
- * This product includes cryptographic software written by Eric Young
- * (eay@cryptsoft.com).  This product includes software written by Tim
- * Hudson (tjh@cryptsoft.com).
- *
- */
-
-#ifndef HEADER_SYMHACKS_H
-#define HEADER_SYMHACKS_H
-
-#include <openssl/e_os2.h>
-
-/* Hacks to solve the problem with linkers incapable of handling very long
-   symbol names.  In the case of VMS, the limit is 31 characters on VMS for
-   VAX. */
-#ifdef OPENSSL_SYS_VMS
-
-/* Hack a long name in crypto/ex_data.c */
-#undef CRYPTO_get_ex_data_implementation
-#define CRYPTO_get_ex_data_implementation	CRYPTO_get_ex_data_impl
-#undef CRYPTO_set_ex_data_implementation
-#define CRYPTO_set_ex_data_implementation	CRYPTO_set_ex_data_impl
-
-/* Hack a long name in crypto/asn1/a_mbstr.c */
-#undef ASN1_STRING_set_default_mask_asc
-#define ASN1_STRING_set_default_mask_asc	ASN1_STRING_set_def_mask_asc
-
-#if 0 /* No longer needed, since safestack macro magic does the job */
-/* Hack the names created with DECLARE_ASN1_SET_OF(PKCS7_SIGNER_INFO) */
-#undef i2d_ASN1_SET_OF_PKCS7_SIGNER_INFO
-#define i2d_ASN1_SET_OF_PKCS7_SIGNER_INFO	i2d_ASN1_SET_OF_PKCS7_SIGINF
-#undef d2i_ASN1_SET_OF_PKCS7_SIGNER_INFO
-#define d2i_ASN1_SET_OF_PKCS7_SIGNER_INFO	d2i_ASN1_SET_OF_PKCS7_SIGINF
-#endif
-
-#if 0 /* No longer needed, since safestack macro magic does the job */
-/* Hack the names created with DECLARE_ASN1_SET_OF(PKCS7_RECIP_INFO) */
-#undef i2d_ASN1_SET_OF_PKCS7_RECIP_INFO
-#define i2d_ASN1_SET_OF_PKCS7_RECIP_INFO	i2d_ASN1_SET_OF_PKCS7_RECINF
-#undef d2i_ASN1_SET_OF_PKCS7_RECIP_INFO
-#define d2i_ASN1_SET_OF_PKCS7_RECIP_INFO	d2i_ASN1_SET_OF_PKCS7_RECINF
-#endif
-
-#if 0 /* No longer needed, since safestack macro magic does the job */
-/* Hack the names created with DECLARE_ASN1_SET_OF(ACCESS_DESCRIPTION) */
-#undef i2d_ASN1_SET_OF_ACCESS_DESCRIPTION
-#define i2d_ASN1_SET_OF_ACCESS_DESCRIPTION	i2d_ASN1_SET_OF_ACC_DESC
-#undef d2i_ASN1_SET_OF_ACCESS_DESCRIPTION
-#define d2i_ASN1_SET_OF_ACCESS_DESCRIPTION	d2i_ASN1_SET_OF_ACC_DESC
-#endif
-
-/* Hack the names created with DECLARE_PEM_rw(NETSCAPE_CERT_SEQUENCE) */
-#undef PEM_read_NETSCAPE_CERT_SEQUENCE
-#define PEM_read_NETSCAPE_CERT_SEQUENCE		PEM_read_NS_CERT_SEQ
-#undef PEM_write_NETSCAPE_CERT_SEQUENCE
-#define PEM_write_NETSCAPE_CERT_SEQUENCE	PEM_write_NS_CERT_SEQ
-#undef PEM_read_bio_NETSCAPE_CERT_SEQUENCE
-#define PEM_read_bio_NETSCAPE_CERT_SEQUENCE	PEM_read_bio_NS_CERT_SEQ
-#undef PEM_write_bio_NETSCAPE_CERT_SEQUENCE
-#define PEM_write_bio_NETSCAPE_CERT_SEQUENCE	PEM_write_bio_NS_CERT_SEQ
-#undef PEM_write_cb_bio_NETSCAPE_CERT_SEQUENCE
-#define PEM_write_cb_bio_NETSCAPE_CERT_SEQUENCE	PEM_write_cb_bio_NS_CERT_SEQ
-
-/* Hack the names created with DECLARE_PEM_rw(PKCS8_PRIV_KEY_INFO) */
-#undef PEM_read_PKCS8_PRIV_KEY_INFO
-#define PEM_read_PKCS8_PRIV_KEY_INFO		PEM_read_P8_PRIV_KEY_INFO
-#undef PEM_write_PKCS8_PRIV_KEY_INFO
-#define PEM_write_PKCS8_PRIV_KEY_INFO		PEM_write_P8_PRIV_KEY_INFO
-#undef PEM_read_bio_PKCS8_PRIV_KEY_INFO
-#define PEM_read_bio_PKCS8_PRIV_KEY_INFO	PEM_read_bio_P8_PRIV_KEY_INFO
-#undef PEM_write_bio_PKCS8_PRIV_KEY_INFO
-#define PEM_write_bio_PKCS8_PRIV_KEY_INFO	PEM_write_bio_P8_PRIV_KEY_INFO
-#undef PEM_write_cb_bio_PKCS8_PRIV_KEY_INFO
-#define PEM_write_cb_bio_PKCS8_PRIV_KEY_INFO	PEM_wrt_cb_bio_P8_PRIV_KEY_INFO
-
-/* Hack other PEM names */
-#undef PEM_write_bio_PKCS8PrivateKey_nid
-#define PEM_write_bio_PKCS8PrivateKey_nid	PEM_write_bio_PKCS8PrivKey_nid
-
-/* Hack some long X509 names */
-#undef X509_REVOKED_get_ext_by_critical
-#define X509_REVOKED_get_ext_by_critical	X509_REVOKED_get_ext_by_critic
-#undef X509_policy_tree_get0_user_policies
-#define X509_policy_tree_get0_user_policies	X509_pcy_tree_get0_usr_policies
-#undef X509_policy_node_get0_qualifiers
-#define X509_policy_node_get0_qualifiers	X509_pcy_node_get0_qualifiers
-#undef X509_STORE_CTX_get_explicit_policy
-#define X509_STORE_CTX_get_explicit_policy	X509_STORE_CTX_get_expl_policy
-
-/* Hack some long CRYPTO names */
-#undef CRYPTO_set_dynlock_destroy_callback
-#define CRYPTO_set_dynlock_destroy_callback     CRYPTO_set_dynlock_destroy_cb
-#undef CRYPTO_set_dynlock_create_callback
-#define CRYPTO_set_dynlock_create_callback      CRYPTO_set_dynlock_create_cb
-#undef CRYPTO_set_dynlock_lock_callback
-#define CRYPTO_set_dynlock_lock_callback        CRYPTO_set_dynlock_lock_cb
-#undef CRYPTO_get_dynlock_lock_callback
-#define CRYPTO_get_dynlock_lock_callback        CRYPTO_get_dynlock_lock_cb
-#undef CRYPTO_get_dynlock_destroy_callback
-#define CRYPTO_get_dynlock_destroy_callback     CRYPTO_get_dynlock_destroy_cb
-#undef CRYPTO_get_dynlock_create_callback
-#define CRYPTO_get_dynlock_create_callback      CRYPTO_get_dynlock_create_cb
-#undef CRYPTO_set_locked_mem_ex_functions
-#define CRYPTO_set_locked_mem_ex_functions      CRYPTO_set_locked_mem_ex_funcs
-#undef CRYPTO_get_locked_mem_ex_functions
-#define CRYPTO_get_locked_mem_ex_functions      CRYPTO_get_locked_mem_ex_funcs
-
-/* Hack some long SSL names */
-#undef SSL_CTX_set_default_verify_paths
-#define SSL_CTX_set_default_verify_paths        SSL_CTX_set_def_verify_paths
-#undef SSL_get_ex_data_X509_STORE_CTX_idx
-#define SSL_get_ex_data_X509_STORE_CTX_idx      SSL_get_ex_d_X509_STORE_CTX_idx
-#undef SSL_add_file_cert_subjects_to_stack
-#define SSL_add_file_cert_subjects_to_stack     SSL_add_file_cert_subjs_to_stk
-#undef SSL_add_dir_cert_subjects_to_stack
-#define SSL_add_dir_cert_subjects_to_stack      SSL_add_dir_cert_subjs_to_stk
-#undef SSL_CTX_use_certificate_chain_file
-#define SSL_CTX_use_certificate_chain_file      SSL_CTX_use_cert_chain_file
-#undef SSL_CTX_set_cert_verify_callback
-#define SSL_CTX_set_cert_verify_callback        SSL_CTX_set_cert_verify_cb
-#undef SSL_CTX_set_default_passwd_cb_userdata
-#define SSL_CTX_set_default_passwd_cb_userdata  SSL_CTX_set_def_passwd_cb_ud
-#undef SSL_COMP_get_compression_methods
-#define SSL_COMP_get_compression_methods	SSL_COMP_get_compress_methods
-
-/* Hack some long ENGINE names */
-#undef ENGINE_get_default_BN_mod_exp_crt
-#define ENGINE_get_default_BN_mod_exp_crt	ENGINE_get_def_BN_mod_exp_crt
-#undef ENGINE_set_default_BN_mod_exp_crt
-#define ENGINE_set_default_BN_mod_exp_crt	ENGINE_set_def_BN_mod_exp_crt
-#undef ENGINE_set_load_privkey_function
-#define ENGINE_set_load_privkey_function        ENGINE_set_load_privkey_fn
-#undef ENGINE_get_load_privkey_function
-#define ENGINE_get_load_privkey_function        ENGINE_get_load_privkey_fn
-
-/* Hack some long OCSP names */
-#undef OCSP_REQUEST_get_ext_by_critical
-#define OCSP_REQUEST_get_ext_by_critical        OCSP_REQUEST_get_ext_by_crit
-#undef OCSP_BASICRESP_get_ext_by_critical
-#define OCSP_BASICRESP_get_ext_by_critical      OCSP_BASICRESP_get_ext_by_crit
-#undef OCSP_SINGLERESP_get_ext_by_critical
-#define OCSP_SINGLERESP_get_ext_by_critical     OCSP_SINGLERESP_get_ext_by_crit
-
-/* Hack some long DES names */
-#undef _ossl_old_des_ede3_cfb64_encrypt
-#define _ossl_old_des_ede3_cfb64_encrypt	_ossl_odes_ede3_cfb64_encrypt
-#undef _ossl_old_des_ede3_ofb64_encrypt
-#define _ossl_old_des_ede3_ofb64_encrypt	_ossl_odes_ede3_ofb64_encrypt
-
-/* Hack some long EVP names */
-#undef OPENSSL_add_all_algorithms_noconf
-#define OPENSSL_add_all_algorithms_noconf	OPENSSL_add_all_algo_noconf
-#undef OPENSSL_add_all_algorithms_conf
-#define OPENSSL_add_all_algorithms_conf		OPENSSL_add_all_algo_conf
-
-/* Hack some long EC names */
-#undef EC_GROUP_set_point_conversion_form
-#define EC_GROUP_set_point_conversion_form	EC_GROUP_set_point_conv_form
-#undef EC_GROUP_get_point_conversion_form
-#define EC_GROUP_get_point_conversion_form	EC_GROUP_get_point_conv_form
-#undef EC_GROUP_clear_free_all_extra_data
-#define EC_GROUP_clear_free_all_extra_data	EC_GROUP_clr_free_all_xtra_data
-#undef EC_POINT_set_Jprojective_coordinates_GFp
-#define EC_POINT_set_Jprojective_coordinates_GFp \
-                                                EC_POINT_set_Jproj_coords_GFp
-#undef EC_POINT_get_Jprojective_coordinates_GFp
-#define EC_POINT_get_Jprojective_coordinates_GFp \
-                                                EC_POINT_get_Jproj_coords_GFp
-#undef EC_POINT_set_affine_coordinates_GFp
-#define EC_POINT_set_affine_coordinates_GFp     EC_POINT_set_affine_coords_GFp
-#undef EC_POINT_get_affine_coordinates_GFp
-#define EC_POINT_get_affine_coordinates_GFp     EC_POINT_get_affine_coords_GFp
-#undef EC_POINT_set_compressed_coordinates_GFp
-#define EC_POINT_set_compressed_coordinates_GFp EC_POINT_set_compr_coords_GFp
-#undef EC_POINT_set_affine_coordinates_GF2m
-#define EC_POINT_set_affine_coordinates_GF2m    EC_POINT_set_affine_coords_GF2m
-#undef EC_POINT_get_affine_coordinates_GF2m
-#define EC_POINT_get_affine_coordinates_GF2m    EC_POINT_get_affine_coords_GF2m
-#undef EC_POINT_set_compressed_coordinates_GF2m
-#define EC_POINT_set_compressed_coordinates_GF2m \
-                                                EC_POINT_set_compr_coords_GF2m
-#undef ec_GF2m_simple_group_clear_finish
-#define ec_GF2m_simple_group_clear_finish        ec_GF2m_simple_grp_clr_finish
-#undef ec_GF2m_simple_group_check_discriminant
-#define ec_GF2m_simple_group_check_discriminant	ec_GF2m_simple_grp_chk_discrim
-#undef ec_GF2m_simple_point_clear_finish
-#define ec_GF2m_simple_point_clear_finish        ec_GF2m_simple_pt_clr_finish
-#undef ec_GF2m_simple_point_set_to_infinity
-#define ec_GF2m_simple_point_set_to_infinity     ec_GF2m_simple_pt_set_to_inf
-#undef ec_GF2m_simple_points_make_affine
-#define ec_GF2m_simple_points_make_affine        ec_GF2m_simple_pts_make_affine
-#undef ec_GF2m_simple_point_set_affine_coordinates
-#define ec_GF2m_simple_point_set_affine_coordinates \
-                                                ec_GF2m_smp_pt_set_af_coords
-#undef ec_GF2m_simple_point_get_affine_coordinates
-#define ec_GF2m_simple_point_get_affine_coordinates \
-                                                ec_GF2m_smp_pt_get_af_coords
-#undef ec_GF2m_simple_set_compressed_coordinates
-#define ec_GF2m_simple_set_compressed_coordinates \
-                                                ec_GF2m_smp_set_compr_coords
-#undef ec_GFp_simple_group_set_curve_GFp
-#define ec_GFp_simple_group_set_curve_GFp       ec_GFp_simple_grp_set_curve_GFp
-#undef ec_GFp_simple_group_get_curve_GFp
-#define ec_GFp_simple_group_get_curve_GFp       ec_GFp_simple_grp_get_curve_GFp
-#undef ec_GFp_simple_group_clear_finish
-#define ec_GFp_simple_group_clear_finish        ec_GFp_simple_grp_clear_finish
-#undef ec_GFp_simple_group_set_generator
-#define ec_GFp_simple_group_set_generator       ec_GFp_simple_grp_set_generator
-#undef ec_GFp_simple_group_get0_generator
-#define ec_GFp_simple_group_get0_generator      ec_GFp_simple_grp_gt0_generator
-#undef ec_GFp_simple_group_get_cofactor
-#define ec_GFp_simple_group_get_cofactor        ec_GFp_simple_grp_get_cofactor
-#undef ec_GFp_simple_point_clear_finish
-#define ec_GFp_simple_point_clear_finish        ec_GFp_simple_pt_clear_finish
-#undef ec_GFp_simple_point_set_to_infinity
-#define ec_GFp_simple_point_set_to_infinity     ec_GFp_simple_pt_set_to_inf
-#undef ec_GFp_simple_points_make_affine
-#define ec_GFp_simple_points_make_affine        ec_GFp_simple_pts_make_affine
-#undef ec_GFp_simple_group_get_curve_GFp
-#define ec_GFp_simple_group_get_curve_GFp       ec_GFp_simple_grp_get_curve_GFp
-#undef ec_GFp_simple_set_Jprojective_coordinates_GFp
-#define ec_GFp_simple_set_Jprojective_coordinates_GFp \
-                                                ec_GFp_smp_set_Jproj_coords_GFp
-#undef ec_GFp_simple_get_Jprojective_coordinates_GFp
-#define ec_GFp_simple_get_Jprojective_coordinates_GFp \
-                                                ec_GFp_smp_get_Jproj_coords_GFp
-#undef ec_GFp_simple_point_set_affine_coordinates_GFp
-#define ec_GFp_simple_point_set_affine_coordinates_GFp \
-                                                ec_GFp_smp_pt_set_af_coords_GFp
-#undef ec_GFp_simple_point_get_affine_coordinates_GFp
-#define ec_GFp_simple_point_get_affine_coordinates_GFp \
-                                                ec_GFp_smp_pt_get_af_coords_GFp
-#undef ec_GFp_simple_set_compressed_coordinates_GFp
-#define ec_GFp_simple_set_compressed_coordinates_GFp \
-                                                ec_GFp_smp_set_compr_coords_GFp
-#undef ec_GFp_simple_point_set_affine_coordinates
-#define ec_GFp_simple_point_set_affine_coordinates \
-                                                ec_GFp_smp_pt_set_af_coords
-#undef ec_GFp_simple_point_get_affine_coordinates
-#define ec_GFp_simple_point_get_affine_coordinates \
-                                                ec_GFp_smp_pt_get_af_coords
-#undef ec_GFp_simple_set_compressed_coordinates
-#define ec_GFp_simple_set_compressed_coordinates \
-                                                ec_GFp_smp_set_compr_coords
-#undef ec_GFp_simple_group_check_discriminant
-#define ec_GFp_simple_group_check_discriminant	ec_GFp_simple_grp_chk_discrim
-
-/* Hack som long STORE names */
-#undef STORE_method_set_initialise_function
-#define STORE_method_set_initialise_function	STORE_meth_set_initialise_fn
-#undef STORE_method_set_cleanup_function
-#define STORE_method_set_cleanup_function	STORE_meth_set_cleanup_fn
-#undef STORE_method_set_generate_function
-#define STORE_method_set_generate_function	STORE_meth_set_generate_fn
-#undef STORE_method_set_modify_function
-#define STORE_method_set_modify_function	STORE_meth_set_modify_fn
-#undef STORE_method_set_revoke_function
-#define STORE_method_set_revoke_function	STORE_meth_set_revoke_fn
-#undef STORE_method_set_delete_function
-#define STORE_method_set_delete_function	STORE_meth_set_delete_fn
-#undef STORE_method_set_list_start_function
-#define STORE_method_set_list_start_function	STORE_meth_set_list_start_fn
-#undef STORE_method_set_list_next_function
-#define STORE_method_set_list_next_function	STORE_meth_set_list_next_fn
-#undef STORE_method_set_list_end_function
-#define STORE_method_set_list_end_function	STORE_meth_set_list_end_fn
-#undef STORE_method_set_update_store_function
-#define STORE_method_set_update_store_function	STORE_meth_set_update_store_fn
-#undef STORE_method_set_lock_store_function
-#define STORE_method_set_lock_store_function	STORE_meth_set_lock_store_fn
-#undef STORE_method_set_unlock_store_function
-#define STORE_method_set_unlock_store_function	STORE_meth_set_unlock_store_fn
-#undef STORE_method_get_initialise_function
-#define STORE_method_get_initialise_function	STORE_meth_get_initialise_fn
-#undef STORE_method_get_cleanup_function
-#define STORE_method_get_cleanup_function	STORE_meth_get_cleanup_fn
-#undef STORE_method_get_generate_function
-#define STORE_method_get_generate_function	STORE_meth_get_generate_fn
-#undef STORE_method_get_modify_function
-#define STORE_method_get_modify_function	STORE_meth_get_modify_fn
-#undef STORE_method_get_revoke_function
-#define STORE_method_get_revoke_function	STORE_meth_get_revoke_fn
-#undef STORE_method_get_delete_function
-#define STORE_method_get_delete_function	STORE_meth_get_delete_fn
-#undef STORE_method_get_list_start_function
-#define STORE_method_get_list_start_function	STORE_meth_get_list_start_fn
-#undef STORE_method_get_list_next_function
-#define STORE_method_get_list_next_function	STORE_meth_get_list_next_fn
-#undef STORE_method_get_list_end_function
-#define STORE_method_get_list_end_function	STORE_meth_get_list_end_fn
-#undef STORE_method_get_update_store_function
-#define STORE_method_get_update_store_function	STORE_meth_get_update_store_fn
-#undef STORE_method_get_lock_store_function
-#define STORE_method_get_lock_store_function	STORE_meth_get_lock_store_fn
-#undef STORE_method_get_unlock_store_function
-#define STORE_method_get_unlock_store_function	STORE_meth_get_unlock_store_fn
-
-#endif /* defined OPENSSL_SYS_VMS */
-
-
-/* Case insensiteve linking causes problems.... */
-#if defined(OPENSSL_SYS_WIN16) || defined(OPENSSL_SYS_VMS) || defined(OPENSSL_SYS_OS2)
-#undef ERR_load_CRYPTO_strings
-#define ERR_load_CRYPTO_strings			ERR_load_CRYPTOlib_strings
-#undef OCSP_crlID_new
-#define OCSP_crlID_new                          OCSP_crlID2_new
-
-#undef d2i_ECPARAMETERS
-#define d2i_ECPARAMETERS                        d2i_UC_ECPARAMETERS
-#undef i2d_ECPARAMETERS
-#define i2d_ECPARAMETERS                        i2d_UC_ECPARAMETERS
-#undef d2i_ECPKPARAMETERS
-#define d2i_ECPKPARAMETERS                      d2i_UC_ECPKPARAMETERS
-#undef i2d_ECPKPARAMETERS
-#define i2d_ECPKPARAMETERS                      i2d_UC_ECPKPARAMETERS
-
-/* These functions do not seem to exist!  However, I'm paranoid...
-   Original command in x509v3.h:
-   These functions are being redefined in another directory,
-   and clash when the linker is case-insensitive, so let's
-   hide them a little, by giving them an extra 'o' at the
-   beginning of the name... */
-#undef X509v3_cleanup_extensions
-#define X509v3_cleanup_extensions               oX509v3_cleanup_extensions
-#undef X509v3_add_extension
-#define X509v3_add_extension                    oX509v3_add_extension
-#undef X509v3_add_netscape_extensions
-#define X509v3_add_netscape_extensions          oX509v3_add_netscape_extensions
-#undef X509v3_add_standard_extensions
-#define X509v3_add_standard_extensions          oX509v3_add_standard_extensions
-
-
-#endif
-
-
-#endif /* ! defined HEADER_VMS_IDHACKS_H */
diff --git a/crypto/openssl/crypto/threads/README b/crypto/openssl/crypto/threads/README
deleted file mode 100644
index df6b26e146f2..000000000000
--- a/crypto/openssl/crypto/threads/README
+++ /dev/null
@@ -1,14 +0,0 @@
-Mutithreading testing area.
-
-Since this stuff is very very platorm specific, this is not part of the
-normal build.  Have a read of doc/threads.doc.
-
-mttest will do some testing and will currently build under Windows NT/95,
-Solaris and Linux.  The IRIX stuff is not finished.
-
-I have tested this program on a 12 CPU ultra sparc box (solaris 2.5.1)
-and things seem to work ok.
-
-The Linux pthreads package can be retrieved from 
-http://www.mit.edu:8001/people/proven/pthreads.html
-
diff --git a/crypto/openssl/crypto/threads/mttest.c b/crypto/openssl/crypto/threads/mttest.c
deleted file mode 100644
index f6f3df4b6aa8..000000000000
--- a/crypto/openssl/crypto/threads/mttest.c
+++ /dev/null
@@ -1,1211 +0,0 @@
-/* crypto/threads/mttest.c */
-/* Copyright (C) 1995-1998 Eric Young (eay@cryptsoft.com)
- * All rights reserved.
- *
- * This package is an SSL implementation written
- * by Eric Young (eay@cryptsoft.com).
- * The implementation was written so as to conform with Netscapes SSL.
- * 
- * This library is free for commercial and non-commercial use as long as
- * the following conditions are aheared to.  The following conditions
- * apply to all code found in this distribution, be it the RC4, RSA,
- * lhash, DES, etc., code; not just the SSL code.  The SSL documentation
- * included with this distribution is covered by the same copyright terms
- * except that the holder is Tim Hudson (tjh@cryptsoft.com).
- * 
- * Copyright remains Eric Young's, and as such any Copyright notices in
- * the code are not to be removed.
- * If this package is used in a product, Eric Young should be given attribution
- * as the author of the parts of the library used.
- * This can be in the form of a textual message at program startup or
- * in documentation (online or textual) provided with the package.
- * 
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions
- * are met:
- * 1. Redistributions of source code must retain the copyright
- *    notice, this list of conditions and the following disclaimer.
- * 2. Redistributions in binary form must reproduce the above copyright
- *    notice, this list of conditions and the following disclaimer in the
- *    documentation and/or other materials provided with the distribution.
- * 3. All advertising materials mentioning features or use of this software
- *    must display the following acknowledgement:
- *    "This product includes cryptographic software written by
- *     Eric Young (eay@cryptsoft.com)"
- *    The word 'cryptographic' can be left out if the rouines from the library
- *    being used are not cryptographic related :-).
- * 4. If you include any Windows specific code (or a derivative thereof) from 
- *    the apps directory (application code) you must include an acknowledgement:
- *    "This product includes software written by Tim Hudson (tjh@cryptsoft.com)"
- * 
- * THIS SOFTWARE IS PROVIDED BY ERIC YOUNG ``AS IS'' AND
- * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
- * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
- * ARE DISCLAIMED.  IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE
- * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
- * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
- * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
- * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
- * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
- * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
- * SUCH DAMAGE.
- * 
- * The licence and distribution terms for any publically available version or
- * derivative of this code cannot be changed.  i.e. this code cannot simply be
- * copied and put under another distribution licence
- * [including the GNU Public Licence.]
- */
-
-#include <stdio.h>
-#include <stdlib.h>
-#include <string.h>
-#include <errno.h>
-#ifdef LINUX
-#include <typedefs.h>
-#endif
-#ifdef OPENSSL_SYS_WIN32
-#include <windows.h>
-#endif
-#ifdef SOLARIS
-#include <synch.h>
-#include <thread.h>
-#endif
-#ifdef IRIX
-#include <ulocks.h>
-#include <sys/prctl.h>
-#endif
-#ifdef PTHREADS
-#include <pthread.h>
-#endif
-#ifdef OPENSSL_SYS_NETWARE
-#if !defined __int64
-#  define __int64 long long
-#endif   
-#include <nwmpk.h>
-#endif
-#include <openssl/lhash.h>
-#include <openssl/crypto.h>
-#include <openssl/buffer.h>
-#include "../../e_os.h"
-#include <openssl/x509.h>
-#include <openssl/ssl.h>
-#include <openssl/err.h>
-#include <openssl/rand.h>
-
-#ifdef OPENSSL_NO_FP_API
-#define APPS_WIN16
-#include "../buffer/bss_file.c"
-#endif
-
-#ifdef OPENSSL_SYS_NETWARE
-#define TEST_SERVER_CERT "/openssl/apps/server.pem"
-#define TEST_CLIENT_CERT "/openssl/apps/client.pem"
-#else
-#define TEST_SERVER_CERT "../../apps/server.pem"
-#define TEST_CLIENT_CERT "../../apps/client.pem"
-#endif
-
-#define MAX_THREAD_NUMBER	100
-
-int MS_CALLBACK verify_callback(int ok, X509_STORE_CTX *xs);
-void thread_setup(void);
-void thread_cleanup(void);
-void do_threads(SSL_CTX *s_ctx,SSL_CTX *c_ctx);
-
-void irix_locking_callback(int mode,int type,char *file,int line);
-void solaris_locking_callback(int mode,int type,char *file,int line);
-void win32_locking_callback(int mode,int type,char *file,int line);
-void pthreads_locking_callback(int mode,int type,char *file,int line);
-void netware_locking_callback(int mode,int type,char *file,int line);
-
-unsigned long irix_thread_id(void );
-unsigned long solaris_thread_id(void );
-unsigned long pthreads_thread_id(void );
-unsigned long netware_thread_id(void );
-
-#if defined(OPENSSL_SYS_NETWARE)
-static MPKMutex *lock_cs;
-static MPKSema ThreadSem;
-static long *lock_count;
-#endif
-
-BIO *bio_err=NULL;
-BIO *bio_stdout=NULL;
-
-static char *cipher=NULL;
-int verbose=0;
-#ifdef FIONBIO
-static int s_nbio=0;
-#endif
-
-int thread_number=10;
-int number_of_loops=10;
-int reconnect=0;
-int cache_stats=0;
-
-static const char rnd_seed[] = "string to make the random number generator think it has entropy";
-
-int doit(char *ctx[4]);
-static void print_stats(FILE *fp, SSL_CTX *ctx)
-{
-	fprintf(fp,"%4ld items in the session cache\n",
-		SSL_CTX_sess_number(ctx));
-	fprintf(fp,"%4d client connects (SSL_connect())\n",
-		SSL_CTX_sess_connect(ctx));
-	fprintf(fp,"%4d client connects that finished\n",
-		SSL_CTX_sess_connect_good(ctx));
-	fprintf(fp,"%4d server connects (SSL_accept())\n",
-		SSL_CTX_sess_accept(ctx));
-	fprintf(fp,"%4d server connects that finished\n",
-		SSL_CTX_sess_accept_good(ctx));
-	fprintf(fp,"%4d session cache hits\n",SSL_CTX_sess_hits(ctx));
-	fprintf(fp,"%4d session cache misses\n",SSL_CTX_sess_misses(ctx));
-	fprintf(fp,"%4d session cache timeouts\n",SSL_CTX_sess_timeouts(ctx));
-	}
-
-static void sv_usage(void)
-	{
-	fprintf(stderr,"usage: ssltest [args ...]\n");
-	fprintf(stderr,"\n");
-	fprintf(stderr," -server_auth  - check server certificate\n");
-	fprintf(stderr," -client_auth  - do client authentication\n");
-	fprintf(stderr," -v            - more output\n");
-	fprintf(stderr," -CApath arg   - PEM format directory of CA's\n");
-	fprintf(stderr," -CAfile arg   - PEM format file of CA's\n");
-	fprintf(stderr," -threads arg  - number of threads\n");
-	fprintf(stderr," -loops arg    - number of 'connections', per thread\n");
-	fprintf(stderr," -reconnect    - reuse session-id's\n");
-	fprintf(stderr," -stats        - server session-id cache stats\n");
-	fprintf(stderr," -cert arg     - server certificate/key\n");
-	fprintf(stderr," -ccert arg    - client certificate/key\n");
-	fprintf(stderr," -ssl3         - just SSLv3n\n");
-	}
-
-int main(int argc, char *argv[])
-	{
-	char *CApath=NULL,*CAfile=NULL;
-	int badop=0;
-	int ret=1;
-	int client_auth=0;
-	int server_auth=0;
-	SSL_CTX *s_ctx=NULL;
-	SSL_CTX *c_ctx=NULL;
-	char *scert=TEST_SERVER_CERT;
-	char *ccert=TEST_CLIENT_CERT;
-	SSL_METHOD *ssl_method=SSLv23_method();
-
-	RAND_seed(rnd_seed, sizeof rnd_seed);
-
-	if (bio_err == NULL)
-		bio_err=BIO_new_fp(stderr,BIO_NOCLOSE);
-	if (bio_stdout == NULL)
-		bio_stdout=BIO_new_fp(stdout,BIO_NOCLOSE);
-	argc--;
-	argv++;
-
-	while (argc >= 1)
-		{
-		if	(strcmp(*argv,"-server_auth") == 0)
-			server_auth=1;
-		else if	(strcmp(*argv,"-client_auth") == 0)
-			client_auth=1;
-		else if	(strcmp(*argv,"-reconnect") == 0)
-			reconnect=1;
-		else if	(strcmp(*argv,"-stats") == 0)
-			cache_stats=1;
-		else if	(strcmp(*argv,"-ssl3") == 0)
-			ssl_method=SSLv3_method();
-		else if	(strcmp(*argv,"-ssl2") == 0)
-			ssl_method=SSLv2_method();
-		else if	(strcmp(*argv,"-CApath") == 0)
-			{
-			if (--argc < 1) goto bad;
-			CApath= *(++argv);
-			}
-		else if	(strcmp(*argv,"-CAfile") == 0)
-			{
-			if (--argc < 1) goto bad;
-			CAfile= *(++argv);
-			}
-		else if	(strcmp(*argv,"-cert") == 0)
-			{
-			if (--argc < 1) goto bad;
-			scert= *(++argv);
-			}
-		else if	(strcmp(*argv,"-ccert") == 0)
-			{
-			if (--argc < 1) goto bad;
-			ccert= *(++argv);
-			}
-		else if	(strcmp(*argv,"-threads") == 0)
-			{
-			if (--argc < 1) goto bad;
-			thread_number= atoi(*(++argv));
-			if (thread_number == 0) thread_number=1;
-			if (thread_number > MAX_THREAD_NUMBER)
-				thread_number=MAX_THREAD_NUMBER;
-			}
-		else if	(strcmp(*argv,"-loops") == 0)
-			{
-			if (--argc < 1) goto bad;
-			number_of_loops= atoi(*(++argv));
-			if (number_of_loops == 0) number_of_loops=1;
-			}
-		else
-			{
-			fprintf(stderr,"unknown option %s\n",*argv);
-			badop=1;
-			break;
-			}
-		argc--;
-		argv++;
-		}
-	if (badop)
-		{
-bad:
-		sv_usage();
-		goto end;
-		}
-
-	if (cipher == NULL && OPENSSL_issetugid() == 0)
-		cipher=getenv("SSL_CIPHER");
-
-	SSL_load_error_strings();
-	OpenSSL_add_ssl_algorithms();
-
-	c_ctx=SSL_CTX_new(ssl_method);
-	s_ctx=SSL_CTX_new(ssl_method);
-	if ((c_ctx == NULL) || (s_ctx == NULL))
-		{
-		ERR_print_errors(bio_err);
-		goto end;
-		}
-
-	SSL_CTX_set_session_cache_mode(s_ctx,
-		SSL_SESS_CACHE_NO_AUTO_CLEAR|SSL_SESS_CACHE_SERVER);
-	SSL_CTX_set_session_cache_mode(c_ctx,
-		SSL_SESS_CACHE_NO_AUTO_CLEAR|SSL_SESS_CACHE_SERVER);
-
-	if (!SSL_CTX_use_certificate_file(s_ctx,scert,SSL_FILETYPE_PEM))
-		{
-		ERR_print_errors(bio_err);
-		}
-	else if (!SSL_CTX_use_RSAPrivateKey_file(s_ctx,scert,SSL_FILETYPE_PEM))
-		{
-		ERR_print_errors(bio_err);
-		goto end;
-		}
-
-	if (client_auth)
-		{
-		SSL_CTX_use_certificate_file(c_ctx,ccert,
-			SSL_FILETYPE_PEM);
-		SSL_CTX_use_RSAPrivateKey_file(c_ctx,ccert,
-			SSL_FILETYPE_PEM);
-		}
-
-	if (	(!SSL_CTX_load_verify_locations(s_ctx,CAfile,CApath)) ||
-		(!SSL_CTX_set_default_verify_paths(s_ctx)) ||
-		(!SSL_CTX_load_verify_locations(c_ctx,CAfile,CApath)) ||
-		(!SSL_CTX_set_default_verify_paths(c_ctx)))
-		{
-		fprintf(stderr,"SSL_load_verify_locations\n");
-		ERR_print_errors(bio_err);
-		goto end;
-		}
-
-	if (client_auth)
-		{
-		fprintf(stderr,"client authentication\n");
-		SSL_CTX_set_verify(s_ctx,
-			SSL_VERIFY_PEER|SSL_VERIFY_FAIL_IF_NO_PEER_CERT,
-			verify_callback);
-		}
-	if (server_auth)
-		{
-		fprintf(stderr,"server authentication\n");
-		SSL_CTX_set_verify(c_ctx,SSL_VERIFY_PEER,
-			verify_callback);
-		}
-
-	thread_setup();
-	do_threads(s_ctx,c_ctx);
-	thread_cleanup();
-end:
-	
-	if (c_ctx != NULL) 
-		{
-		fprintf(stderr,"Client SSL_CTX stats then free it\n");
-		print_stats(stderr,c_ctx);
-		SSL_CTX_free(c_ctx);
-		}
-	if (s_ctx != NULL)
-		{
-		fprintf(stderr,"Server SSL_CTX stats then free it\n");
-		print_stats(stderr,s_ctx);
-		if (cache_stats)
-			{
-			fprintf(stderr,"-----\n");
-			lh_stats(SSL_CTX_sessions(s_ctx),stderr);
-			fprintf(stderr,"-----\n");
-		/*	lh_node_stats(SSL_CTX_sessions(s_ctx),stderr);
-			fprintf(stderr,"-----\n"); */
-			lh_node_usage_stats(SSL_CTX_sessions(s_ctx),stderr);
-			fprintf(stderr,"-----\n");
-			}
-		SSL_CTX_free(s_ctx);
-		fprintf(stderr,"done free\n");
-		}
-	exit(ret);
-	return(0);
-	}
-
-#define W_READ	1
-#define W_WRITE	2
-#define C_DONE	1
-#define S_DONE	2
-
-int ndoit(SSL_CTX *ssl_ctx[2])
-	{
-	int i;
-	int ret;
-	char *ctx[4];
-
-	ctx[0]=(char *)ssl_ctx[0];
-	ctx[1]=(char *)ssl_ctx[1];
-
-	if (reconnect)
-		{
-		ctx[2]=(char *)SSL_new(ssl_ctx[0]);
-		ctx[3]=(char *)SSL_new(ssl_ctx[1]);
-		}
-	else
-		{
-		ctx[2]=NULL;
-		ctx[3]=NULL;
-		}
-
-	fprintf(stdout,"started thread %lu\n",CRYPTO_thread_id());
-	for (i=0; i<number_of_loops; i++)
-		{
-/*		fprintf(stderr,"%4d %2d ctx->ref (%3d,%3d)\n",
-			CRYPTO_thread_id(),i,
-			ssl_ctx[0]->references,
-			ssl_ctx[1]->references); */
-	/*	pthread_delay_np(&tm);*/
-
-		ret=doit(ctx);
-		if (ret != 0)
-			{
-			fprintf(stdout,"error[%d] %lu - %d\n",
-				i,CRYPTO_thread_id(),ret);
-			return(ret);
-			}
-		}
-	fprintf(stdout,"DONE %lu\n",CRYPTO_thread_id());
-	if (reconnect)
-		{
-		SSL_free((SSL *)ctx[2]);
-		SSL_free((SSL *)ctx[3]);
-		}
-#   ifdef OPENSSL_SYS_NETWARE
-        MPKSemaphoreSignal(ThreadSem);
-#   endif
-	return(0);
-	}
-
-int doit(char *ctx[4])
-	{
-	SSL_CTX *s_ctx,*c_ctx;
-	static char cbuf[200],sbuf[200];
-	SSL *c_ssl=NULL;
-	SSL *s_ssl=NULL;
-	BIO *c_to_s=NULL;
-	BIO *s_to_c=NULL;
-	BIO *c_bio=NULL;
-	BIO *s_bio=NULL;
-	int c_r,c_w,s_r,s_w;
-	int c_want,s_want;
-	int i;
-	int done=0;
-	int c_write,s_write;
-	int do_server=0,do_client=0;
-
-	s_ctx=(SSL_CTX *)ctx[0];
-	c_ctx=(SSL_CTX *)ctx[1];
-
-	if (ctx[2] != NULL)
-		s_ssl=(SSL *)ctx[2];
-	else
-		s_ssl=SSL_new(s_ctx);
-
-	if (ctx[3] != NULL)
-		c_ssl=(SSL *)ctx[3];
-	else
-		c_ssl=SSL_new(c_ctx);
-
-	if ((s_ssl == NULL) || (c_ssl == NULL)) goto err;
-
-	c_to_s=BIO_new(BIO_s_mem());
-	s_to_c=BIO_new(BIO_s_mem());
-	if ((s_to_c == NULL) || (c_to_s == NULL)) goto err;
-
-	c_bio=BIO_new(BIO_f_ssl());
-	s_bio=BIO_new(BIO_f_ssl());
-	if ((c_bio == NULL) || (s_bio == NULL)) goto err;
-
-	SSL_set_connect_state(c_ssl);
-	SSL_set_bio(c_ssl,s_to_c,c_to_s);
-	BIO_set_ssl(c_bio,c_ssl,(ctx[2] == NULL)?BIO_CLOSE:BIO_NOCLOSE);
-
-	SSL_set_accept_state(s_ssl);
-	SSL_set_bio(s_ssl,c_to_s,s_to_c);
-	BIO_set_ssl(s_bio,s_ssl,(ctx[3] == NULL)?BIO_CLOSE:BIO_NOCLOSE);
-
-	c_r=0; s_r=1;
-	c_w=1; s_w=0;
-	c_want=W_WRITE;
-	s_want=0;
-	c_write=1,s_write=0;
-
-	/* We can always do writes */
-	for (;;)
-		{
-		do_server=0;
-		do_client=0;
-
-		i=(int)BIO_pending(s_bio);
-		if ((i && s_r) || s_w) do_server=1;
-
-		i=(int)BIO_pending(c_bio);
-		if ((i && c_r) || c_w) do_client=1;
-
-		if (do_server && verbose)
-			{
-			if (SSL_in_init(s_ssl))
-				printf("server waiting in SSL_accept - %s\n",
-					SSL_state_string_long(s_ssl));
-			else if (s_write)
-				printf("server:SSL_write()\n");
-			else 
-				printf("server:SSL_read()\n");
-			}
-
-		if (do_client && verbose)
-			{
-			if (SSL_in_init(c_ssl))
-				printf("client waiting in SSL_connect - %s\n",
-					SSL_state_string_long(c_ssl));
-			else if (c_write)
-				printf("client:SSL_write()\n");
-			else
-				printf("client:SSL_read()\n");
-			}
-
-		if (!do_client && !do_server)
-			{
-			fprintf(stdout,"ERROR IN STARTUP\n");
-			break;
-			}
-		if (do_client && !(done & C_DONE))
-			{
-			if (c_write)
-				{
-				i=BIO_write(c_bio,"hello from client\n",18);
-				if (i < 0)
-					{
-					c_r=0;
-					c_w=0;
-					if (BIO_should_retry(c_bio))
-						{
-						if (BIO_should_read(c_bio))
-							c_r=1;
-						if (BIO_should_write(c_bio))
-							c_w=1;
-						}
-					else
-						{
-						fprintf(stderr,"ERROR in CLIENT\n");
-						ERR_print_errors_fp(stderr);
-						return(1);
-						}
-					}
-				else if (i == 0)
-					{
-					fprintf(stderr,"SSL CLIENT STARTUP FAILED\n");
-					return(1);
-					}
-				else
-					{
-					/* ok */
-					c_write=0;
-					}
-				}
-			else
-				{
-				i=BIO_read(c_bio,cbuf,100);
-				if (i < 0)
-					{
-					c_r=0;
-					c_w=0;
-					if (BIO_should_retry(c_bio))
-						{
-						if (BIO_should_read(c_bio))
-							c_r=1;
-						if (BIO_should_write(c_bio))
-							c_w=1;
-						}
-					else
-						{
-						fprintf(stderr,"ERROR in CLIENT\n");
-						ERR_print_errors_fp(stderr);
-						return(1);
-						}
-					}
-				else if (i == 0)
-					{
-					fprintf(stderr,"SSL CLIENT STARTUP FAILED\n");
-					return(1);
-					}
-				else
-					{
-					done|=C_DONE;
-#ifdef undef
-					fprintf(stdout,"CLIENT:from server:");
-					fwrite(cbuf,1,i,stdout);
-					fflush(stdout);
-#endif
-					}
-				}
-			}
-
-		if (do_server && !(done & S_DONE))
-			{
-			if (!s_write)
-				{
-				i=BIO_read(s_bio,sbuf,100);
-				if (i < 0)
-					{
-					s_r=0;
-					s_w=0;
-					if (BIO_should_retry(s_bio))
-						{
-						if (BIO_should_read(s_bio))
-							s_r=1;
-						if (BIO_should_write(s_bio))
-							s_w=1;
-						}
-					else
-						{
-						fprintf(stderr,"ERROR in SERVER\n");
-						ERR_print_errors_fp(stderr);
-						return(1);
-						}
-					}
-				else if (i == 0)
-					{
-					fprintf(stderr,"SSL SERVER STARTUP FAILED\n");
-					return(1);
-					}
-				else
-					{
-					s_write=1;
-					s_w=1;
-#ifdef undef
-					fprintf(stdout,"SERVER:from client:");
-					fwrite(sbuf,1,i,stdout);
-					fflush(stdout);
-#endif
-					}
-				}
-			else
-				{
-				i=BIO_write(s_bio,"hello from server\n",18);
-				if (i < 0)
-					{
-					s_r=0;
-					s_w=0;
-					if (BIO_should_retry(s_bio))
-						{
-						if (BIO_should_read(s_bio))
-							s_r=1;
-						if (BIO_should_write(s_bio))
-							s_w=1;
-						}
-					else
-						{
-						fprintf(stderr,"ERROR in SERVER\n");
-						ERR_print_errors_fp(stderr);
-						return(1);
-						}
-					}
-				else if (i == 0)
-					{
-					fprintf(stderr,"SSL SERVER STARTUP FAILED\n");
-					return(1);
-					}
-				else
-					{
-					s_write=0;
-					s_r=1;
-					done|=S_DONE;
-					}
-				}
-			}
-
-		if ((done & S_DONE) && (done & C_DONE)) break;
-#   if defined(OPENSSL_SYS_NETWARE)
-        ThreadSwitchWithDelay();
-#   endif
-		}
-
-	SSL_set_shutdown(c_ssl,SSL_SENT_SHUTDOWN|SSL_RECEIVED_SHUTDOWN);
-	SSL_set_shutdown(s_ssl,SSL_SENT_SHUTDOWN|SSL_RECEIVED_SHUTDOWN);
-
-#ifdef undef
-	fprintf(stdout,"DONE\n");
-#endif
-err:
-	/* We have to set the BIO's to NULL otherwise they will be
-	 * free()ed twice.  Once when th s_ssl is SSL_free()ed and
-	 * again when c_ssl is SSL_free()ed.
-	 * This is a hack required because s_ssl and c_ssl are sharing the same
-	 * BIO structure and SSL_set_bio() and SSL_free() automatically
-	 * BIO_free non NULL entries.
-	 * You should not normally do this or be required to do this */
-
-	if (s_ssl != NULL)
-		{
-		s_ssl->rbio=NULL;
-		s_ssl->wbio=NULL;
-		}
-	if (c_ssl != NULL)
-		{
-		c_ssl->rbio=NULL;
-		c_ssl->wbio=NULL;
-		}
-
-	/* The SSL's are optionally freed in the following calls */
-	if (c_to_s != NULL) BIO_free(c_to_s);
-	if (s_to_c != NULL) BIO_free(s_to_c);
-
-	if (c_bio != NULL) BIO_free(c_bio);
-	if (s_bio != NULL) BIO_free(s_bio);
-	return(0);
-	}
-
-int MS_CALLBACK verify_callback(int ok, X509_STORE_CTX *ctx)
-	{
-	char *s, buf[256];
-
-	if (verbose)
-		{
-		s=X509_NAME_oneline(X509_get_subject_name(ctx->current_cert),
-				    buf,256);
-		if (s != NULL)
-			{
-			if (ok)
-				fprintf(stderr,"depth=%d %s\n",
-					ctx->error_depth,buf);
-			else
-				fprintf(stderr,"depth=%d error=%d %s\n",
-					ctx->error_depth,ctx->error,buf);
-			}
-		}
-	return(ok);
-	}
-
-#define THREAD_STACK_SIZE (16*1024)
-
-#ifdef OPENSSL_SYS_WIN32
-
-static HANDLE *lock_cs;
-
-void thread_setup(void)
-	{
-	int i;
-
-	lock_cs=OPENSSL_malloc(CRYPTO_num_locks() * sizeof(HANDLE));
-	for (i=0; i<CRYPTO_num_locks(); i++)
-		{
-		lock_cs[i]=CreateMutex(NULL,FALSE,NULL);
-		}
-
-	CRYPTO_set_locking_callback((void (*)(int,int,char *,int))win32_locking_callback);
-	/* id callback defined */
-	}
-
-void thread_cleanup(void)
-	{
-	int i;
-
-	CRYPTO_set_locking_callback(NULL);
-	for (i=0; i<CRYPTO_num_locks(); i++)
-		CloseHandle(lock_cs[i]);
-	OPENSSL_free(lock_cs);
-	}
-
-void win32_locking_callback(int mode, int type, char *file, int line)
-	{
-	if (mode & CRYPTO_LOCK)
-		{
-		WaitForSingleObject(lock_cs[type],INFINITE);
-		}
-	else
-		{
-		ReleaseMutex(lock_cs[type]);
-		}
-	}
-
-void do_threads(SSL_CTX *s_ctx, SSL_CTX *c_ctx)
-	{
-	double ret;
-	SSL_CTX *ssl_ctx[2];
-	DWORD thread_id[MAX_THREAD_NUMBER];
-	HANDLE thread_handle[MAX_THREAD_NUMBER];
-	int i;
-	SYSTEMTIME start,end;
-
-	ssl_ctx[0]=s_ctx;
-	ssl_ctx[1]=c_ctx;
-
-	GetSystemTime(&start);
-	for (i=0; i<thread_number; i++)
-		{
-		thread_handle[i]=CreateThread(NULL,
-			THREAD_STACK_SIZE,
-			(LPTHREAD_START_ROUTINE)ndoit,
-			(void *)ssl_ctx,
-			0L,
-			&(thread_id[i]));
-		}
-
-	printf("reaping\n");
-	for (i=0; i<thread_number; i+=50)
-		{
-		int j;
-
-		j=(thread_number < (i+50))?(thread_number-i):50;
-
-		if (WaitForMultipleObjects(j,
-			(CONST HANDLE *)&(thread_handle[i]),TRUE,INFINITE)
-			== WAIT_FAILED)
-			{
-			fprintf(stderr,"WaitForMultipleObjects failed:%d\n",GetLastError());
-			exit(1);
-			}
-		}
-	GetSystemTime(&end);
-
-	if (start.wDayOfWeek > end.wDayOfWeek) end.wDayOfWeek+=7;
-	ret=(end.wDayOfWeek-start.wDayOfWeek)*24;
-
-	ret=(ret+end.wHour-start.wHour)*60;
-	ret=(ret+end.wMinute-start.wMinute)*60;
-	ret=(ret+end.wSecond-start.wSecond);
-	ret+=(end.wMilliseconds-start.wMilliseconds)/1000.0;
-
-	printf("win32 threads done - %.3f seconds\n",ret);
-	}
-
-#endif /* OPENSSL_SYS_WIN32 */
-
-#ifdef SOLARIS
-
-static mutex_t *lock_cs;
-/*static rwlock_t *lock_cs; */
-static long *lock_count;
-
-void thread_setup(void)
-	{
-	int i;
-
-	lock_cs=OPENSSL_malloc(CRYPTO_num_locks() * sizeof(mutex_t));
-	lock_count=OPENSSL_malloc(CRYPTO_num_locks() * sizeof(long));
-	for (i=0; i<CRYPTO_num_locks(); i++)
-		{
-		lock_count[i]=0;
-		/* rwlock_init(&(lock_cs[i]),USYNC_THREAD,NULL); */
-		mutex_init(&(lock_cs[i]),USYNC_THREAD,NULL);
-		}
-
-	CRYPTO_set_id_callback((unsigned long (*)())solaris_thread_id);
-	CRYPTO_set_locking_callback((void (*)())solaris_locking_callback);
-	}
-
-void thread_cleanup(void)
-	{
-	int i;
-
-	CRYPTO_set_locking_callback(NULL);
-
-	fprintf(stderr,"cleanup\n");
-
-	for (i=0; i<CRYPTO_num_locks(); i++)
-		{
-		/* rwlock_destroy(&(lock_cs[i])); */
-		mutex_destroy(&(lock_cs[i]));
-		fprintf(stderr,"%8ld:%s\n",lock_count[i],CRYPTO_get_lock_name(i));
-		}
-	OPENSSL_free(lock_cs);
-	OPENSSL_free(lock_count);
-
-	fprintf(stderr,"done cleanup\n");
-
-	}
-
-void solaris_locking_callback(int mode, int type, char *file, int line)
-	{
-#ifdef undef
-	fprintf(stderr,"thread=%4d mode=%s lock=%s %s:%d\n",
-		CRYPTO_thread_id(),
-		(mode&CRYPTO_LOCK)?"l":"u",
-		(type&CRYPTO_READ)?"r":"w",file,line);
-#endif
-
-	/*
-	if (CRYPTO_LOCK_SSL_CERT == type)
-	fprintf(stderr,"(t,m,f,l) %ld %d %s %d\n",
-		CRYPTO_thread_id(),
-		mode,file,line);
-	*/
-	if (mode & CRYPTO_LOCK)
-		{
-	/*	if (mode & CRYPTO_READ)
-			rw_rdlock(&(lock_cs[type]));
-		else
-			rw_wrlock(&(lock_cs[type])); */
-
-		mutex_lock(&(lock_cs[type]));
-		lock_count[type]++;
-		}
-	else
-		{
-/*		rw_unlock(&(lock_cs[type]));  */
-		mutex_unlock(&(lock_cs[type]));
-		}
-	}
-
-void do_threads(SSL_CTX *s_ctx, SSL_CTX *c_ctx)
-	{
-	SSL_CTX *ssl_ctx[2];
-	thread_t thread_ctx[MAX_THREAD_NUMBER];
-	int i;
-
-	ssl_ctx[0]=s_ctx;
-	ssl_ctx[1]=c_ctx;
-
-	thr_setconcurrency(thread_number);
-	for (i=0; i<thread_number; i++)
-		{
-		thr_create(NULL, THREAD_STACK_SIZE,
-			(void *(*)())ndoit,
-			(void *)ssl_ctx,
-			0L,
-			&(thread_ctx[i]));
-		}
-
-	printf("reaping\n");
-	for (i=0; i<thread_number; i++)
-		{
-		thr_join(thread_ctx[i],NULL,NULL);
-		}
-
-	printf("solaris threads done (%d,%d)\n",
-		s_ctx->references,c_ctx->references);
-	}
-
-unsigned long solaris_thread_id(void)
-	{
-	unsigned long ret;
-
-	ret=(unsigned long)thr_self();
-	return(ret);
-	}
-#endif /* SOLARIS */
-
-#ifdef IRIX
-
-
-static usptr_t *arena;
-static usema_t **lock_cs;
-
-void thread_setup(void)
-	{
-	int i;
-	char filename[20];
-
-	strcpy(filename,"/tmp/mttest.XXXXXX");
-	mktemp(filename);
-
-	usconfig(CONF_STHREADIOOFF);
-	usconfig(CONF_STHREADMALLOCOFF);
-	usconfig(CONF_INITUSERS,100);
-	usconfig(CONF_LOCKTYPE,US_DEBUGPLUS);
-	arena=usinit(filename);
-	unlink(filename);
-
-	lock_cs=OPENSSL_malloc(CRYPTO_num_locks() * sizeof(usema_t *));
-	for (i=0; i<CRYPTO_num_locks(); i++)
-		{
-		lock_cs[i]=usnewsema(arena,1);
-		}
-
-	CRYPTO_set_id_callback((unsigned long (*)())irix_thread_id);
-	CRYPTO_set_locking_callback((void (*)())irix_locking_callback);
-	}
-
-void thread_cleanup(void)
-	{
-	int i;
-
-	CRYPTO_set_locking_callback(NULL);
-	for (i=0; i<CRYPTO_num_locks(); i++)
-		{
-		char buf[10];
-
-		sprintf(buf,"%2d:",i);
-		usdumpsema(lock_cs[i],stdout,buf);
-		usfreesema(lock_cs[i],arena);
-		}
-	OPENSSL_free(lock_cs);
-	}
-
-void irix_locking_callback(int mode, int type, char *file, int line)
-	{
-	if (mode & CRYPTO_LOCK)
-		{
-		printf("lock %d\n",type);
-		uspsema(lock_cs[type]);
-		}
-	else
-		{
-		printf("unlock %d\n",type);
-		usvsema(lock_cs[type]);
-		}
-	}
-
-void do_threads(SSL_CTX *s_ctx, SSL_CTX *c_ctx)
-	{
-	SSL_CTX *ssl_ctx[2];
-	int thread_ctx[MAX_THREAD_NUMBER];
-	int i;
-
-	ssl_ctx[0]=s_ctx;
-	ssl_ctx[1]=c_ctx;
-
-	for (i=0; i<thread_number; i++)
-		{
-		thread_ctx[i]=sproc((void (*)())ndoit,
-			PR_SADDR|PR_SFDS,(void *)ssl_ctx);
-		}
-
-	printf("reaping\n");
-	for (i=0; i<thread_number; i++)
-		{
-		wait(NULL);
-		}
-
-	printf("irix threads done (%d,%d)\n",
-		s_ctx->references,c_ctx->references);
-	}
-
-unsigned long irix_thread_id(void)
-	{
-	unsigned long ret;
-
-	ret=(unsigned long)getpid();
-	return(ret);
-	}
-#endif /* IRIX */
-
-#ifdef PTHREADS
-
-static pthread_mutex_t *lock_cs;
-static long *lock_count;
-
-void thread_setup(void)
-	{
-	int i;
-
-	lock_cs=OPENSSL_malloc(CRYPTO_num_locks() * sizeof(pthread_mutex_t));
-	lock_count=OPENSSL_malloc(CRYPTO_num_locks() * sizeof(long));
-	for (i=0; i<CRYPTO_num_locks(); i++)
-		{
-		lock_count[i]=0;
-		pthread_mutex_init(&(lock_cs[i]),NULL);
-		}
-
-	CRYPTO_set_id_callback((unsigned long (*)())pthreads_thread_id);
-	CRYPTO_set_locking_callback((void (*)())pthreads_locking_callback);
-	}
-
-void thread_cleanup(void)
-	{
-	int i;
-
-	CRYPTO_set_locking_callback(NULL);
-	fprintf(stderr,"cleanup\n");
-	for (i=0; i<CRYPTO_num_locks(); i++)
-		{
-		pthread_mutex_destroy(&(lock_cs[i]));
-		fprintf(stderr,"%8ld:%s\n",lock_count[i],
-			CRYPTO_get_lock_name(i));
-		}
-	OPENSSL_free(lock_cs);
-	OPENSSL_free(lock_count);
-
-	fprintf(stderr,"done cleanup\n");
-	}
-
-void pthreads_locking_callback(int mode, int type, char *file,
-	     int line)
-      {
-#ifdef undef
-	fprintf(stderr,"thread=%4d mode=%s lock=%s %s:%d\n",
-		CRYPTO_thread_id(),
-		(mode&CRYPTO_LOCK)?"l":"u",
-		(type&CRYPTO_READ)?"r":"w",file,line);
-#endif
-/*
-	if (CRYPTO_LOCK_SSL_CERT == type)
-		fprintf(stderr,"(t,m,f,l) %ld %d %s %d\n",
-		CRYPTO_thread_id(),
-		mode,file,line);
-*/
-	if (mode & CRYPTO_LOCK)
-		{
-		pthread_mutex_lock(&(lock_cs[type]));
-		lock_count[type]++;
-		}
-	else
-		{
-		pthread_mutex_unlock(&(lock_cs[type]));
-		}
-	}
-
-void do_threads(SSL_CTX *s_ctx, SSL_CTX *c_ctx)
-	{
-	SSL_CTX *ssl_ctx[2];
-	pthread_t thread_ctx[MAX_THREAD_NUMBER];
-	int i;
-
-	ssl_ctx[0]=s_ctx;
-	ssl_ctx[1]=c_ctx;
-
-	/*
-	thr_setconcurrency(thread_number);
-	*/
-	for (i=0; i<thread_number; i++)
-		{
-		pthread_create(&(thread_ctx[i]), NULL,
-			(void *(*)())ndoit, (void *)ssl_ctx);
-		}
-
-	printf("reaping\n");
-	for (i=0; i<thread_number; i++)
-		{
-		pthread_join(thread_ctx[i],NULL);
-		}
-
-	printf("pthreads threads done (%d,%d)\n",
-		s_ctx->references,c_ctx->references);
-	}
-
-unsigned long pthreads_thread_id(void)
-	{
-	unsigned long ret;
-
-	ret=(unsigned long)pthread_self();
-	return(ret);
-	}
-
-#endif /* PTHREADS */
-
-
-
-#ifdef OPENSSL_SYS_NETWARE
-
-void thread_setup(void)
-{
-   int i;
-
-   lock_cs=OPENSSL_malloc(CRYPTO_num_locks() * sizeof(MPKMutex));
-   lock_count=OPENSSL_malloc(CRYPTO_num_locks() * sizeof(long));
-   for (i=0; i<CRYPTO_num_locks(); i++)
-   {
-      lock_count[i]=0;
-      lock_cs[i]=MPKMutexAlloc("OpenSSL mutex");
-   }
-
-   ThreadSem = MPKSemaphoreAlloc("OpenSSL mttest semaphore", 0 );
-
-   CRYPTO_set_id_callback((unsigned long (*)())netware_thread_id);
-   CRYPTO_set_locking_callback((void (*)())netware_locking_callback);
-}
-
-void thread_cleanup(void)
-{
-   int i;
-
-   CRYPTO_set_locking_callback(NULL);
-
-   fprintf(stdout,"thread_cleanup\n");
-
-   for (i=0; i<CRYPTO_num_locks(); i++)
-   {
-      MPKMutexFree(lock_cs[i]);
-      fprintf(stdout,"%8ld:%s\n",lock_count[i],CRYPTO_get_lock_name(i));
-   }
-   OPENSSL_free(lock_cs);
-   OPENSSL_free(lock_count);
-
-   MPKSemaphoreFree(ThreadSem);
-
-   fprintf(stdout,"done cleanup\n");
-}
-
-void netware_locking_callback(int mode, int type, char *file, int line)
-{
-   if (mode & CRYPTO_LOCK)
-   {
-      MPKMutexLock(lock_cs[type]);
-      lock_count[type]++;
-   }
-   else
-      MPKMutexUnlock(lock_cs[type]);
-}
-
-void do_threads(SSL_CTX *s_ctx, SSL_CTX *c_ctx)
-{
-   SSL_CTX *ssl_ctx[2];
-   int i;
-   ssl_ctx[0]=s_ctx;
-   ssl_ctx[1]=c_ctx;
-
-   for (i=0; i<thread_number; i++)
-   {
-      BeginThread( (void(*)(void*))ndoit, NULL, THREAD_STACK_SIZE, 
-                   (void*)ssl_ctx);
-      ThreadSwitchWithDelay();
-   }
-
-   printf("reaping\n");
-
-      /* loop until all threads have signaled the semaphore */
-   for (i=0; i<thread_number; i++)
-   {
-      MPKSemaphoreWait(ThreadSem);
-   }
-   printf("netware threads done (%d,%d)\n",
-         s_ctx->references,c_ctx->references);
-}
-
-unsigned long netware_thread_id(void)
-{
-   unsigned long ret;
-
-   ret=(unsigned long)GetThreadID();
-   return(ret);
-}
-#endif /* NETWARE */
diff --git a/crypto/openssl/crypto/threads/profile.sh b/crypto/openssl/crypto/threads/profile.sh
deleted file mode 100644
index 6e3e342fc0b3..000000000000
--- a/crypto/openssl/crypto/threads/profile.sh
+++ /dev/null
@@ -1,4 +0,0 @@
-#!/bin/sh
-/bin/rm -f mttest
-cc -p -DSOLARIS -I../../include -g mttest.c -o mttest -L/usr/lib/libc -ldl -L../.. -lthread  -lssl -lcrypto -lnsl -lsocket
-
diff --git a/crypto/openssl/crypto/threads/pthread.sh b/crypto/openssl/crypto/threads/pthread.sh
deleted file mode 100644
index f1c49821d2fb..000000000000
--- a/crypto/openssl/crypto/threads/pthread.sh
+++ /dev/null
@@ -1,9 +0,0 @@
-#!/bin/sh
-#
-# build using pthreads
-#
-# http://www.mit.edu:8001/people/proven/pthreads.html
-#
-/bin/rm -f mttest
-pgcc -DPTHREADS -I../../include -g mttest.c -o mttest -L../.. -lssl -lcrypto 
-
diff --git a/crypto/openssl/crypto/threads/pthread2.sh b/crypto/openssl/crypto/threads/pthread2.sh
deleted file mode 100755
index 41264c6a5046..000000000000
--- a/crypto/openssl/crypto/threads/pthread2.sh
+++ /dev/null
@@ -1,7 +0,0 @@
-#!/bin/sh
-#
-# build using pthreads where it's already built into the system
-#
-/bin/rm -f mttest
-gcc -DPTHREADS -I../../include -g mttest.c -o mttest -L../.. -lssl -lcrypto -lpthread
-
diff --git a/crypto/openssl/crypto/threads/purify.sh b/crypto/openssl/crypto/threads/purify.sh
deleted file mode 100644
index 6d44fe26b76a..000000000000
--- a/crypto/openssl/crypto/threads/purify.sh
+++ /dev/null
@@ -1,4 +0,0 @@
-#!/bin/sh
-/bin/rm -f mttest
-purify cc -DSOLARIS -I../../include -g mttest.c -o mttest -L../.. -lthread  -lssl -lcrypto -lnsl -lsocket
-
diff --git a/crypto/openssl/crypto/threads/th-lock.c b/crypto/openssl/crypto/threads/th-lock.c
deleted file mode 100644
index 14aae5f91287..000000000000
--- a/crypto/openssl/crypto/threads/th-lock.c
+++ /dev/null
@@ -1,387 +0,0 @@
-/* crypto/threads/th-lock.c */
-/* Copyright (C) 1995-1998 Eric Young (eay@cryptsoft.com)
- * All rights reserved.
- *
- * This package is an SSL implementation written
- * by Eric Young (eay@cryptsoft.com).
- * The implementation was written so as to conform with Netscapes SSL.
- * 
- * This library is free for commercial and non-commercial use as long as
- * the following conditions are aheared to.  The following conditions
- * apply to all code found in this distribution, be it the RC4, RSA,
- * lhash, DES, etc., code; not just the SSL code.  The SSL documentation
- * included with this distribution is covered by the same copyright terms
- * except that the holder is Tim Hudson (tjh@cryptsoft.com).
- * 
- * Copyright remains Eric Young's, and as such any Copyright notices in
- * the code are not to be removed.
- * If this package is used in a product, Eric Young should be given attribution
- * as the author of the parts of the library used.
- * This can be in the form of a textual message at program startup or
- * in documentation (online or textual) provided with the package.
- * 
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions
- * are met:
- * 1. Redistributions of source code must retain the copyright
- *    notice, this list of conditions and the following disclaimer.
- * 2. Redistributions in binary form must reproduce the above copyright
- *    notice, this list of conditions and the following disclaimer in the
- *    documentation and/or other materials provided with the distribution.
- * 3. All advertising materials mentioning features or use of this software
- *    must display the following acknowledgement:
- *    "This product includes cryptographic software written by
- *     Eric Young (eay@cryptsoft.com)"
- *    The word 'cryptographic' can be left out if the rouines from the library
- *    being used are not cryptographic related :-).
- * 4. If you include any Windows specific code (or a derivative thereof) from 
- *    the apps directory (application code) you must include an acknowledgement:
- *    "This product includes software written by Tim Hudson (tjh@cryptsoft.com)"
- * 
- * THIS SOFTWARE IS PROVIDED BY ERIC YOUNG ``AS IS'' AND
- * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
- * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
- * ARE DISCLAIMED.  IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE
- * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
- * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
- * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
- * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
- * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
- * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
- * SUCH DAMAGE.
- * 
- * The licence and distribution terms for any publically available version or
- * derivative of this code cannot be changed.  i.e. this code cannot simply be
- * copied and put under another distribution licence
- * [including the GNU Public Licence.]
- */
-
-#include <stdio.h>
-#include <stdlib.h>
-#include <string.h>
-#include <errno.h>
-#ifdef LINUX
-#include <typedefs.h>
-#endif
-#ifdef OPENSSL_SYS_WIN32
-#include <windows.h>
-#endif
-#ifdef SOLARIS
-#include <synch.h>
-#include <thread.h>
-#endif
-#ifdef IRIX
-#include <ulocks.h>
-#include <sys/prctl.h>
-#endif
-#ifdef PTHREADS
-#include <pthread.h>
-#endif
-#include <openssl/lhash.h>
-#include <openssl/crypto.h>
-#include <openssl/buffer.h>
-#include "../../e_os.h"
-#include <openssl/x509.h>
-#include <openssl/ssl.h>
-#include <openssl/err.h>
-
-void CRYPTO_thread_setup(void);
-void CRYPTO_thread_cleanup(void);
-
-static void irix_locking_callback(int mode,int type,char *file,int line);
-static void solaris_locking_callback(int mode,int type,char *file,int line);
-static void win32_locking_callback(int mode,int type,char *file,int line);
-static void pthreads_locking_callback(int mode,int type,char *file,int line);
-
-static unsigned long irix_thread_id(void );
-static unsigned long solaris_thread_id(void );
-static unsigned long pthreads_thread_id(void );
-
-/* usage:
- * CRYPTO_thread_setup();
- * application code
- * CRYPTO_thread_cleanup();
- */
-
-#define THREAD_STACK_SIZE (16*1024)
-
-#ifdef OPENSSL_SYS_WIN32
-
-static HANDLE *lock_cs;
-
-void CRYPTO_thread_setup(void)
-	{
-	int i;
-
-	lock_cs=OPENSSL_malloc(CRYPTO_num_locks() * sizeof(HANDLE));
-	for (i=0; i<CRYPTO_num_locks(); i++)
-		{
-		lock_cs[i]=CreateMutex(NULL,FALSE,NULL);
-		}
-
-	CRYPTO_set_locking_callback((void (*)(int,int,char *,int))win32_locking_callback);
-	/* id callback defined */
-	return(1);
-	}
-
-static void CRYPTO_thread_cleanup(void)
-	{
-	int i;
-
-	CRYPTO_set_locking_callback(NULL);
-	for (i=0; i<CRYPTO_num_locks(); i++)
-		CloseHandle(lock_cs[i]);
-	OPENSSL_free(lock_cs);
-	}
-
-void win32_locking_callback(int mode, int type, char *file, int line)
-	{
-	if (mode & CRYPTO_LOCK)
-		{
-		WaitForSingleObject(lock_cs[type],INFINITE);
-		}
-	else
-		{
-		ReleaseMutex(lock_cs[type]);
-		}
-	}
-
-#endif /* OPENSSL_SYS_WIN32 */
-
-#ifdef SOLARIS
-
-#define USE_MUTEX
-
-#ifdef USE_MUTEX
-static mutex_t *lock_cs;
-#else
-static rwlock_t *lock_cs;
-#endif
-static long *lock_count;
-
-void CRYPTO_thread_setup(void)
-	{
-	int i;
-
-#ifdef USE_MUTEX
-	lock_cs=OPENSSL_malloc(CRYPTO_num_locks() * sizeof(mutex_t));
-#else
-	lock_cs=OPENSSL_malloc(CRYPTO_num_locks() * sizeof(rwlock_t));
-#endif
-	lock_count=OPENSSL_malloc(CRYPTO_num_locks() * sizeof(long));
-	for (i=0; i<CRYPTO_num_locks(); i++)
-		{
-		lock_count[i]=0;
-#ifdef USE_MUTEX
-		mutex_init(&(lock_cs[i]),USYNC_THREAD,NULL);
-#else
-		rwlock_init(&(lock_cs[i]),USYNC_THREAD,NULL);
-#endif
-		}
-
-	CRYPTO_set_id_callback((unsigned long (*)())solaris_thread_id);
-	CRYPTO_set_locking_callback((void (*)())solaris_locking_callback);
-	}
-
-void CRYPTO_thread_cleanup(void)
-	{
-	int i;
-
-	CRYPTO_set_locking_callback(NULL);
-	for (i=0; i<CRYPTO_num_locks(); i++)
-		{
-#ifdef USE_MUTEX
-		mutex_destroy(&(lock_cs[i]));
-#else
-		rwlock_destroy(&(lock_cs[i]));
-#endif
-		}
-	OPENSSL_free(lock_cs);
-	OPENSSL_free(lock_count);
-	}
-
-void solaris_locking_callback(int mode, int type, char *file, int line)
-	{
-#if 0
-	fprintf(stderr,"thread=%4d mode=%s lock=%s %s:%d\n",
-		CRYPTO_thread_id(),
-		(mode&CRYPTO_LOCK)?"l":"u",
-		(type&CRYPTO_READ)?"r":"w",file,line);
-#endif
-
-#if 0
-	if (CRYPTO_LOCK_SSL_CERT == type)
-		fprintf(stderr,"(t,m,f,l) %ld %d %s %d\n",
-			CRYPTO_thread_id(),
-			mode,file,line);
-#endif
-	if (mode & CRYPTO_LOCK)
-		{
-#ifdef USE_MUTEX
-		mutex_lock(&(lock_cs[type]));
-#else
-		if (mode & CRYPTO_READ)
-			rw_rdlock(&(lock_cs[type]));
-		else
-			rw_wrlock(&(lock_cs[type]));
-#endif
-		lock_count[type]++;
-		}
-	else
-		{
-#ifdef USE_MUTEX
-		mutex_unlock(&(lock_cs[type]));
-#else
-		rw_unlock(&(lock_cs[type]));
-#endif
-		}
-	}
-
-unsigned long solaris_thread_id(void)
-	{
-	unsigned long ret;
-
-	ret=(unsigned long)thr_self();
-	return(ret);
-	}
-#endif /* SOLARIS */
-
-#ifdef IRIX
-/* I don't think this works..... */
-
-static usptr_t *arena;
-static usema_t **lock_cs;
-
-void CRYPTO_thread_setup(void)
-	{
-	int i;
-	char filename[20];
-
-	strcpy(filename,"/tmp/mttest.XXXXXX");
-	mktemp(filename);
-
-	usconfig(CONF_STHREADIOOFF);
-	usconfig(CONF_STHREADMALLOCOFF);
-	usconfig(CONF_INITUSERS,100);
-	usconfig(CONF_LOCKTYPE,US_DEBUGPLUS);
-	arena=usinit(filename);
-	unlink(filename);
-
-	lock_cs=OPENSSL_malloc(CRYPTO_num_locks() * sizeof(usema_t *));
-	for (i=0; i<CRYPTO_num_locks(); i++)
-		{
-		lock_cs[i]=usnewsema(arena,1);
-		}
-
-	CRYPTO_set_id_callback((unsigned long (*)())irix_thread_id);
-	CRYPTO_set_locking_callback((void (*)())irix_locking_callback);
-	}
-
-void CRYPTO_thread_cleanup(void)
-	{
-	int i;
-
-	CRYPTO_set_locking_callback(NULL);
-	for (i=0; i<CRYPTO_num_locks(); i++)
-		{
-		char buf[10];
-
-		sprintf(buf,"%2d:",i);
-		usdumpsema(lock_cs[i],stdout,buf);
-		usfreesema(lock_cs[i],arena);
-		}
-	OPENSSL_free(lock_cs);
-	}
-
-void irix_locking_callback(int mode, int type, char *file, int line)
-	{
-	if (mode & CRYPTO_LOCK)
-		{
-		uspsema(lock_cs[type]);
-		}
-	else
-		{
-		usvsema(lock_cs[type]);
-		}
-	}
-
-unsigned long irix_thread_id(void)
-	{
-	unsigned long ret;
-
-	ret=(unsigned long)getpid();
-	return(ret);
-	}
-#endif /* IRIX */
-
-/* Linux and a few others */
-#ifdef PTHREADS
-
-static pthread_mutex_t *lock_cs;
-static long *lock_count;
-
-void CRYPTO_thread_setup(void)
-	{
-	int i;
-
-	lock_cs=OPENSSL_malloc(CRYPTO_num_locks() * sizeof(pthread_mutex_t));
-	lock_count=OPENSSL_malloc(CRYPTO_num_locks() * sizeof(long));
-	for (i=0; i<CRYPTO_num_locks(); i++)
-		{
-		lock_count[i]=0;
-		pthread_mutex_init(&(lock_cs[i]),NULL);
-		}
-
-	CRYPTO_set_id_callback((unsigned long (*)())pthreads_thread_id);
-	CRYPTO_set_locking_callback((void (*)())pthreads_locking_callback);
-	}
-
-void thread_cleanup(void)
-	{
-	int i;
-
-	CRYPTO_set_locking_callback(NULL);
-	for (i=0; i<CRYPTO_num_locks(); i++)
-		{
-		pthread_mutex_destroy(&(lock_cs[i]));
-		}
-	OPENSSL_free(lock_cs);
-	OPENSSL_free(lock_count);
-	}
-
-void pthreads_locking_callback(int mode, int type, char *file,
-	     int line)
-      {
-#if 0
-	fprintf(stderr,"thread=%4d mode=%s lock=%s %s:%d\n",
-		CRYPTO_thread_id(),
-		(mode&CRYPTO_LOCK)?"l":"u",
-		(type&CRYPTO_READ)?"r":"w",file,line);
-#endif
-#if 0
-	if (CRYPTO_LOCK_SSL_CERT == type)
-		fprintf(stderr,"(t,m,f,l) %ld %d %s %d\n",
-		CRYPTO_thread_id(),
-		mode,file,line);
-#endif
-	if (mode & CRYPTO_LOCK)
-		{
-		pthread_mutex_lock(&(lock_cs[type]));
-		lock_count[type]++;
-		}
-	else
-		{
-		pthread_mutex_unlock(&(lock_cs[type]));
-		}
-	}
-
-unsigned long pthreads_thread_id(void)
-	{
-	unsigned long ret;
-
-	ret=(unsigned long)pthread_self();
-	return(ret);
-	}
-
-#endif /* PTHREADS */
-
diff --git a/crypto/openssl/crypto/tmdiff.c b/crypto/openssl/crypto/tmdiff.c
deleted file mode 100644
index 1c6e052ac98d..000000000000
--- a/crypto/openssl/crypto/tmdiff.c
+++ /dev/null
@@ -1,260 +0,0 @@
-/* crypto/tmdiff.c */
-/* Copyright (C) 1995-1998 Eric Young (eay@cryptsoft.com)
- * All rights reserved.
- *
- * This package is an SSL implementation written
- * by Eric Young (eay@cryptsoft.com).
- * The implementation was written so as to conform with Netscapes SSL.
- * 
- * This library is free for commercial and non-commercial use as long as
- * the following conditions are aheared to.  The following conditions
- * apply to all code found in this distribution, be it the RC4, RSA,
- * lhash, DES, etc., code; not just the SSL code.  The SSL documentation
- * included with this distribution is covered by the same copyright terms
- * except that the holder is Tim Hudson (tjh@cryptsoft.com).
- * 
- * Copyright remains Eric Young's, and as such any Copyright notices in
- * the code are not to be removed.
- * If this package is used in a product, Eric Young should be given attribution
- * as the author of the parts of the library used.
- * This can be in the form of a textual message at program startup or
- * in documentation (online or textual) provided with the package.
- * 
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions
- * are met:
- * 1. Redistributions of source code must retain the copyright
- *    notice, this list of conditions and the following disclaimer.
- * 2. Redistributions in binary form must reproduce the above copyright
- *    notice, this list of conditions and the following disclaimer in the
- *    documentation and/or other materials provided with the distribution.
- * 3. All advertising materials mentioning features or use of this software
- *    must display the following acknowledgement:
- *    "This product includes cryptographic software written by
- *     Eric Young (eay@cryptsoft.com)"
- *    The word 'cryptographic' can be left out if the rouines from the library
- *    being used are not cryptographic related :-).
- * 4. If you include any Windows specific code (or a derivative thereof) from 
- *    the apps directory (application code) you must include an acknowledgement:
- *    "This product includes software written by Tim Hudson (tjh@cryptsoft.com)"
- * 
- * THIS SOFTWARE IS PROVIDED BY ERIC YOUNG ``AS IS'' AND
- * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
- * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
- * ARE DISCLAIMED.  IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE
- * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
- * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
- * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
- * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
- * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
- * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
- * SUCH DAMAGE.
- * 
- * The licence and distribution terms for any publically available version or
- * derivative of this code cannot be changed.  i.e. this code cannot simply be
- * copied and put under another distribution licence
- * [including the GNU Public Licence.]
- */
-#include <stdio.h>
-#include <stdlib.h>
-#include "cryptlib.h"
-#include <openssl/tmdiff.h>
-#if !defined(OPENSSL_SYS_MSDOS)
-#include OPENSSL_UNISTD
-#endif
-
-#ifdef TIMEB
-#undef OPENSSL_SYS_WIN32
-#undef TIMES
-#endif
-
-#if !defined(OPENSSL_SYS_MSDOS) && !defined(OPENSSL_SYS_WIN32) && !(defined(OPENSSL_SYS_VMS) || defined(__DECC)) && !defined(OPENSSL_SYS_MACOSX_RHAPSODY) && !defined(OPENSSL_SYS_VXWORKS)
-# define TIMES
-#endif
-
-#ifdef OPENSSL_SYS_NETWARE
-#undef TIMES
-#endif
-
-#if !defined(_IRIX) || defined (OPENSSL_SYS_NETWARE)
-#  include <time.h>
-#endif
-#ifdef TIMES
-#  include <sys/types.h>
-#  include <sys/times.h>
-#endif
-
-/* Depending on the VMS version, the tms structure is perhaps defined.
-   The __TMS macro will show if it was.  If it wasn't defined, we should
-   undefine TIMES, since that tells the rest of the program how things
-   should be handled.				-- Richard Levitte */
-#if defined(OPENSSL_SYS_VMS_DECC) && !defined(__TMS)
-#undef TIMES
-#endif
-
-#if defined(sun) || defined(__ultrix)
-#define _POSIX_SOURCE
-#include <limits.h>
-#include <sys/param.h>
-#endif
-
-#if !defined(TIMES) && !defined(OPENSSL_SYS_VXWORKS) && !defined(OPENSSL_SYS_NETWARE)
-#include <sys/timeb.h>
-#endif
-
-#ifdef OPENSSL_SYS_WIN32
-#include <windows.h>
-#endif
-
-/* The following if from times(3) man page.  It may need to be changed */
-#ifndef HZ
-# if defined(_SC_CLK_TCK) \
-     && (!defined(OPENSSL_SYS_VMS) || __CTRL_VER >= 70000000)
-/* #  define HZ ((double)sysconf(_SC_CLK_TCK)) */
-#  define HZ sysconf(_SC_CLK_TCK)
-# else
-#  ifndef CLK_TCK
-#   ifndef _BSD_CLK_TCK_ /* FreeBSD hack */
-#    define HZ  100.0
-#   else /* _BSD_CLK_TCK_ */
-#    define HZ ((double)_BSD_CLK_TCK_)
-#   endif
-#  else /* CLK_TCK */
-#   define HZ ((double)CLK_TCK)
-#  endif
-# endif
-#endif
-
-struct ms_tm
-	{
-#ifdef TIMES
-	struct tms ms_tms;
-#else
-#  ifdef OPENSSL_SYS_WIN32
-	HANDLE thread_id;
-	FILETIME ms_win32;
-#  elif defined (OPENSSL_SYS_NETWARE)
-   clock_t ms_clock;
-#  else
-#    ifdef OPENSSL_SYS_VXWORKS
-          unsigned long ticks;
-#    else
-	struct timeb ms_timeb;
-#    endif
-#  endif
-#endif
-	};
-
-MS_TM *ms_time_new(void)
-	{
-	MS_TM *ret;
-
-	ret=(MS_TM *)OPENSSL_malloc(sizeof(MS_TM));
-	if (ret == NULL)
-		return(NULL);
-	memset(ret,0,sizeof(MS_TM));
-#ifdef OPENSSL_SYS_WIN32
-	ret->thread_id=GetCurrentThread();
-#endif
-	return ret;
-	}
-
-void ms_time_free(MS_TM *a)
-	{
-	if (a != NULL)
-		OPENSSL_free(a);
-	}
-
-void ms_time_get(MS_TM *tm)
-	{
-#ifdef OPENSSL_SYS_WIN32
-	FILETIME tmpa,tmpb,tmpc;
-#endif
-
-#ifdef TIMES
-	times(&tm->ms_tms);
-#else
-#  ifdef OPENSSL_SYS_WIN32
-	GetThreadTimes(tm->thread_id,&tmpa,&tmpb,&tmpc,&(tm->ms_win32));
-#  elif defined (OPENSSL_SYS_NETWARE)
-   tm->ms_clock = clock();
-#  else
-#    ifdef OPENSSL_SYS_VXWORKS
-        tm->ticks = tickGet();
-#    else
-	ftime(&tm->ms_timeb);
-#    endif
-#  endif
-#endif
-	}
-
-double ms_time_diff(MS_TM *a, MS_TM *b)
-	{
-	double ret;
-
-#ifdef TIMES
-	ret = HZ;
-	ret = (b->ms_tms.tms_utime-a->ms_tms.tms_utime) / ret;
-#else
-# ifdef OPENSSL_SYS_WIN32
-	{
-#ifdef __GNUC__
-	signed long long la,lb;
-#else
-	signed _int64 la,lb;
-#endif
-	la=a->ms_win32.dwHighDateTime;
-	lb=b->ms_win32.dwHighDateTime;
-	la<<=32;
-	lb<<=32;
-	la+=a->ms_win32.dwLowDateTime;
-	lb+=b->ms_win32.dwLowDateTime;
-	ret=((double)(lb-la))/1e7;
-	}
-# elif defined (OPENSSL_SYS_NETWARE)
-    ret= (double)(b->ms_clock - a->ms_clock);
-# else
-#  ifdef OPENSSL_SYS_VXWORKS
-        ret = (double)(b->ticks - a->ticks) / (double)sysClkRateGet();
-#  else
-	ret=	 (double)(b->ms_timeb.time-a->ms_timeb.time)+
-		(((double)b->ms_timeb.millitm)-
-		((double)a->ms_timeb.millitm))/1000.0;
-#  endif
-# endif
-#endif
-	return((ret < 0.0000001)?0.0000001:ret);
-	}
-
-int ms_time_cmp(const MS_TM *a, const MS_TM *b)
-	{
-	double d;
-	int ret;
-
-#ifdef TIMES
-	d = HZ;
-	d = (b->ms_tms.tms_utime-a->ms_tms.tms_utime) / d;
-#else
-# ifdef OPENSSL_SYS_WIN32
-	d =(b->ms_win32.dwHighDateTime&0x000fffff)*10+b->ms_win32.dwLowDateTime/1e7;
-	d-=(a->ms_win32.dwHighDateTime&0x000fffff)*10+a->ms_win32.dwLowDateTime/1e7;
-# elif defined (OPENSSL_SYS_NETWARE)
-    d= (double)(b->ms_clock - a->ms_clock);
-# else
-#  ifdef OPENSSL_SYS_VXWORKS
-        d = (b->ticks - a->ticks);
-#  else
-	d=	 (double)(b->ms_timeb.time-a->ms_timeb.time)+
-		(((double)b->ms_timeb.millitm)-(double)a->ms_timeb.millitm)/1000.0;
-#  endif
-# endif
-#endif
-	if (d == 0.0)
-		ret=0;
-	else if (d < 0)
-		ret= -1;
-	else
-		ret=1;
-	return(ret);
-	}
-
diff --git a/crypto/openssl/crypto/tmdiff.h b/crypto/openssl/crypto/tmdiff.h
deleted file mode 100644
index af5c41c64992..000000000000
--- a/crypto/openssl/crypto/tmdiff.h
+++ /dev/null
@@ -1,93 +0,0 @@
-/* crypto/tmdiff.h */
-/* Copyright (C) 1995-1998 Eric Young (eay@cryptsoft.com)
- * All rights reserved.
- *
- * This package is an SSL implementation written
- * by Eric Young (eay@cryptsoft.com).
- * The implementation was written so as to conform with Netscapes SSL.
- * 
- * This library is free for commercial and non-commercial use as long as
- * the following conditions are aheared to.  The following conditions
- * apply to all code found in this distribution, be it the RC4, RSA,
- * lhash, DES, etc., code; not just the SSL code.  The SSL documentation
- * included with this distribution is covered by the same copyright terms
- * except that the holder is Tim Hudson (tjh@cryptsoft.com).
- * 
- * Copyright remains Eric Young's, and as such any Copyright notices in
- * the code are not to be removed.
- * If this package is used in a product, Eric Young should be given attribution
- * as the author of the parts of the library used.
- * This can be in the form of a textual message at program startup or
- * in documentation (online or textual) provided with the package.
- * 
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions
- * are met:
- * 1. Redistributions of source code must retain the copyright
- *    notice, this list of conditions and the following disclaimer.
- * 2. Redistributions in binary form must reproduce the above copyright
- *    notice, this list of conditions and the following disclaimer in the
- *    documentation and/or other materials provided with the distribution.
- * 3. All advertising materials mentioning features or use of this software
- *    must display the following acknowledgement:
- *    "This product includes cryptographic software written by
- *     Eric Young (eay@cryptsoft.com)"
- *    The word 'cryptographic' can be left out if the rouines from the library
- *    being used are not cryptographic related :-).
- * 4. If you include any Windows specific code (or a derivative thereof) from 
- *    the apps directory (application code) you must include an acknowledgement:
- *    "This product includes software written by Tim Hudson (tjh@cryptsoft.com)"
- * 
- * THIS SOFTWARE IS PROVIDED BY ERIC YOUNG ``AS IS'' AND
- * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
- * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
- * ARE DISCLAIMED.  IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE
- * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
- * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
- * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
- * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
- * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
- * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
- * SUCH DAMAGE.
- * 
- * The licence and distribution terms for any publically available version or
- * derivative of this code cannot be changed.  i.e. this code cannot simply be
- * copied and put under another distribution licence
- * [including the GNU Public Licence.]
- */
-
-/* Header for dynamic hash table routines
- * Author - Eric Young
- */
-/* ... erm yeah, "dynamic hash tables" you say?
- * 
- * And what would dynamic hash tables have to do with any of this code *now*?
- * AFAICS, this code is only referenced by crypto/bn/exp.c which is an unused
- * file that I doubt compiles any more. speed.c is the only thing that could
- * use this (and it has nothing to do with hash tables), yet it instead has its
- * own duplication of all this stuff and looks, if anything, more complete. See
- * the corresponding note in apps/speed.c.
- * The Bemused - Geoff
- */
-
-#ifndef HEADER_TMDIFF_H
-#define HEADER_TMDIFF_H
-
-#ifdef  __cplusplus
-extern "C" {
-#endif
-
-typedef struct ms_tm MS_TM;
-
-MS_TM *ms_time_new(void );
-void ms_time_free(MS_TM *a);
-void ms_time_get(MS_TM *a);
-double ms_time_diff(MS_TM *start, MS_TM *end);
-int ms_time_cmp(const MS_TM *ap, const MS_TM *bp);
-
-#ifdef  __cplusplus
-}
-#endif
-
-#endif
-
diff --git a/crypto/openssl/crypto/txt_db/Makefile b/crypto/openssl/crypto/txt_db/Makefile
deleted file mode 100644
index e6f30331d8dd..000000000000
--- a/crypto/openssl/crypto/txt_db/Makefile
+++ /dev/null
@@ -1,84 +0,0 @@
-#
-# OpenSSL/crypto/txt_db/Makefile
-#
-
-DIR=	txt_db
-TOP=	../..
-CC=	cc
-INCLUDES=
-CFLAG=-g
-MAKEFILE=	Makefile
-AR=		ar r
-
-CFLAGS= $(INCLUDES) $(CFLAG)
-
-GENERAL=Makefile
-TEST=
-APPS=
-
-LIB=$(TOP)/libcrypto.a
-LIBSRC=txt_db.c
-LIBOBJ=txt_db.o
-
-SRC= $(LIBSRC)
-
-EXHEADER= txt_db.h
-HEADER=	$(EXHEADER)
-
-ALL=    $(GENERAL) $(SRC) $(HEADER)
-
-top:
-	(cd ../..; $(MAKE) DIRS=crypto SDIRS=$(DIR) sub_all)
-
-all:	lib
-
-lib:	$(LIBOBJ)
-	$(AR) $(LIB) $(LIBOBJ)
-	$(RANLIB) $(LIB) || echo Never mind.
-	@touch lib
-
-files:
-	$(PERL) $(TOP)/util/files.pl Makefile >> $(TOP)/MINFO
-
-links:
-	@$(PERL) $(TOP)/util/mklink.pl ../../include/openssl $(EXHEADER)
-	@$(PERL) $(TOP)/util/mklink.pl ../../test $(TEST)
-	@$(PERL) $(TOP)/util/mklink.pl ../../apps $(APPS)
-
-install:
-	@[ -n "$(INSTALLTOP)" ] # should be set by top Makefile...
-	@headerlist="$(EXHEADER)"; for i in $$headerlist ; \
-	do  \
-	(cp $$i $(INSTALL_PREFIX)$(INSTALLTOP)/include/openssl/$$i; \
-	chmod 644 $(INSTALL_PREFIX)$(INSTALLTOP)/include/openssl/$$i ); \
-	done;
-
-tags:
-	ctags $(SRC)
-
-tests:
-
-lint:
-	lint -DLINT $(INCLUDES) $(SRC)>fluff
-
-depend:
-	@[ -n "$(MAKEDEPEND)" ] # should be set by top Makefile...
-	$(MAKEDEPEND) -- $(CFLAG) $(INCLUDES) $(DEPFLAG) -- $(PROGS) $(LIBSRC)
-
-dclean:
-	$(PERL) -pe 'if (/^# DO NOT DELETE THIS LINE/) {print; exit(0);}' $(MAKEFILE) >Makefile.new
-	mv -f Makefile.new $(MAKEFILE)
-
-clean:
-	rm -f *.o *.obj lib tags core .pure .nfs* *.old *.bak fluff
-
-# DO NOT DELETE THIS LINE -- make depend depends on it.
-
-txt_db.o: ../../e_os.h ../../include/openssl/bio.h
-txt_db.o: ../../include/openssl/buffer.h ../../include/openssl/crypto.h
-txt_db.o: ../../include/openssl/e_os2.h ../../include/openssl/err.h
-txt_db.o: ../../include/openssl/lhash.h ../../include/openssl/opensslconf.h
-txt_db.o: ../../include/openssl/opensslv.h ../../include/openssl/ossl_typ.h
-txt_db.o: ../../include/openssl/safestack.h ../../include/openssl/stack.h
-txt_db.o: ../../include/openssl/symhacks.h ../../include/openssl/txt_db.h
-txt_db.o: ../cryptlib.h txt_db.c
diff --git a/crypto/openssl/crypto/txt_db/txt_db.c b/crypto/openssl/crypto/txt_db/txt_db.c
deleted file mode 100644
index 3ed5f72ee94b..000000000000
--- a/crypto/openssl/crypto/txt_db/txt_db.c
+++ /dev/null
@@ -1,386 +0,0 @@
-/* crypto/txt_db/txt_db.c */
-/* Copyright (C) 1995-1998 Eric Young (eay@cryptsoft.com)
- * All rights reserved.
- *
- * This package is an SSL implementation written
- * by Eric Young (eay@cryptsoft.com).
- * The implementation was written so as to conform with Netscapes SSL.
- * 
- * This library is free for commercial and non-commercial use as long as
- * the following conditions are aheared to.  The following conditions
- * apply to all code found in this distribution, be it the RC4, RSA,
- * lhash, DES, etc., code; not just the SSL code.  The SSL documentation
- * included with this distribution is covered by the same copyright terms
- * except that the holder is Tim Hudson (tjh@cryptsoft.com).
- * 
- * Copyright remains Eric Young's, and as such any Copyright notices in
- * the code are not to be removed.
- * If this package is used in a product, Eric Young should be given attribution
- * as the author of the parts of the library used.
- * This can be in the form of a textual message at program startup or
- * in documentation (online or textual) provided with the package.
- * 
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions
- * are met:
- * 1. Redistributions of source code must retain the copyright
- *    notice, this list of conditions and the following disclaimer.
- * 2. Redistributions in binary form must reproduce the above copyright
- *    notice, this list of conditions and the following disclaimer in the
- *    documentation and/or other materials provided with the distribution.
- * 3. All advertising materials mentioning features or use of this software
- *    must display the following acknowledgement:
- *    "This product includes cryptographic software written by
- *     Eric Young (eay@cryptsoft.com)"
- *    The word 'cryptographic' can be left out if the rouines from the library
- *    being used are not cryptographic related :-).
- * 4. If you include any Windows specific code (or a derivative thereof) from 
- *    the apps directory (application code) you must include an acknowledgement:
- *    "This product includes software written by Tim Hudson (tjh@cryptsoft.com)"
- * 
- * THIS SOFTWARE IS PROVIDED BY ERIC YOUNG ``AS IS'' AND
- * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
- * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
- * ARE DISCLAIMED.  IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE
- * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
- * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
- * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
- * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
- * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
- * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
- * SUCH DAMAGE.
- * 
- * The licence and distribution terms for any publically available version or
- * derivative of this code cannot be changed.  i.e. this code cannot simply be
- * copied and put under another distribution licence
- * [including the GNU Public Licence.]
- */
-
-#include <stdio.h>
-#include <stdlib.h>
-#include <string.h>
-#include "cryptlib.h"
-#include <openssl/buffer.h>
-#include <openssl/txt_db.h>
-
-#undef BUFSIZE
-#define BUFSIZE	512
-
-const char TXT_DB_version[]="TXT_DB" OPENSSL_VERSION_PTEXT;
-
-TXT_DB *TXT_DB_read(BIO *in, int num)
-	{
-	TXT_DB *ret=NULL;
-	int er=1;
-	int esc=0;
-	long ln=0;
-	int i,add,n;
-	int size=BUFSIZE;
-	int offset=0;
-	char *p,**pp,*f;
-	BUF_MEM *buf=NULL;
-
-	if ((buf=BUF_MEM_new()) == NULL) goto err;
-	if (!BUF_MEM_grow(buf,size)) goto err;
-
-	if ((ret=(TXT_DB *)OPENSSL_malloc(sizeof(TXT_DB))) == NULL)
-		goto err;
-	ret->num_fields=num;
-	ret->index=NULL;
-	ret->qual=NULL;
-	if ((ret->data=sk_new_null()) == NULL)
-		goto err;
-	if ((ret->index=(LHASH **)OPENSSL_malloc(sizeof(LHASH *)*num)) == NULL)
-		goto err;
-	if ((ret->qual=(int (**)(char **))OPENSSL_malloc(sizeof(int (**)(char **))*num)) == NULL)
-		goto err;
-	for (i=0; i<num; i++)
-		{
-		ret->index[i]=NULL;
-		ret->qual[i]=NULL;
-		}
-
-	add=(num+1)*sizeof(char *);
-	buf->data[size-1]='\0';
-	offset=0;
-	for (;;)
-		{
-		if (offset != 0)
-			{
-			size+=BUFSIZE;
-			if (!BUF_MEM_grow_clean(buf,size)) goto err;
-			}
-		buf->data[offset]='\0';
-		BIO_gets(in,&(buf->data[offset]),size-offset);
-		ln++;
-		if (buf->data[offset] == '\0') break;
-		if ((offset == 0) && (buf->data[0] == '#')) continue;
-		i=strlen(&(buf->data[offset]));
-		offset+=i;
-		if (buf->data[offset-1] != '\n')
-			continue;
-		else
-			{
-			buf->data[offset-1]='\0'; /* blat the '\n' */
-			if (!(p=(char *)OPENSSL_malloc(add+offset))) goto err;
-			offset=0;
-			}
-		pp=(char **)p;
-		p+=add;
-		n=0;
-		pp[n++]=p;
-		i=0;
-		f=buf->data;
-
-		esc=0;
-		for (;;)
-			{
-			if (*f == '\0') break;
-			if (*f == '\t')
-				{
-				if (esc)
-					p--;
-				else
-					{	
-					*(p++)='\0';
-					f++;
-					if (n >=  num) break;
-					pp[n++]=p;
-					continue;
-					}
-				}
-			esc=(*f == '\\');
-			*(p++)= *(f++);
-			}
-		*(p++)='\0';
-		if ((n != num) || (*f != '\0'))
-			{
-#if !defined(OPENSSL_NO_STDIO) && !defined(OPENSSL_SYS_WIN16)	/* temporaty fix :-( */
-			fprintf(stderr,"wrong number of fields on line %ld (looking for field %d, got %d, '%s' left)\n",ln,num,n,f);
-#endif
-			er=2;
-			goto err;
-			}
-		pp[n]=p;
-		if (!sk_push(ret->data,(char *)pp))
-			{
-#if !defined(OPENSSL_NO_STDIO) && !defined(OPENSSL_SYS_WIN16)	/* temporaty fix :-( */
-			fprintf(stderr,"failure in sk_push\n");
-#endif
-			er=2;
-			goto err;
-			}
-		}
-	er=0;
-err:
-	BUF_MEM_free(buf);
-	if (er)
-		{
-#if !defined(OPENSSL_NO_STDIO) && !defined(OPENSSL_SYS_WIN16)
-		if (er == 1) fprintf(stderr,"OPENSSL_malloc failure\n");
-#endif
-		if (ret != NULL)
-			{
-			if (ret->data != NULL) sk_free(ret->data);
-			if (ret->index != NULL) OPENSSL_free(ret->index);
-			if (ret->qual != NULL) OPENSSL_free(ret->qual);
-			if (ret != NULL) OPENSSL_free(ret);
-			}
-		return(NULL);
-		}
-	else
-		return(ret);
-	}
-
-char **TXT_DB_get_by_index(TXT_DB *db, int idx, char **value)
-	{
-	char **ret;
-	LHASH *lh;
-
-	if (idx >= db->num_fields)
-		{
-		db->error=DB_ERROR_INDEX_OUT_OF_RANGE;
-		return(NULL);
-		}
-	lh=db->index[idx];
-	if (lh == NULL)
-		{
-		db->error=DB_ERROR_NO_INDEX;
-		return(NULL);
-		}
-	ret=(char **)lh_retrieve(lh,value);
-	db->error=DB_ERROR_OK;
-	return(ret);
-	}
-
-int TXT_DB_create_index(TXT_DB *db, int field, int (*qual)(char **),
-		LHASH_HASH_FN_TYPE hash, LHASH_COMP_FN_TYPE cmp)
-	{
-	LHASH *idx;
-	char **r;
-	int i,n;
-
-	if (field >= db->num_fields)
-		{
-		db->error=DB_ERROR_INDEX_OUT_OF_RANGE;
-		return(0);
-		}
-	if ((idx=lh_new(hash,cmp)) == NULL)
-		{
-		db->error=DB_ERROR_MALLOC;
-		return(0);
-		}
-	n=sk_num(db->data);
-	for (i=0; i<n; i++)
-		{
-		r=(char **)sk_value(db->data,i);
-		if ((qual != NULL) && (qual(r) == 0)) continue;
-		if ((r=lh_insert(idx,r)) != NULL)
-			{
-			db->error=DB_ERROR_INDEX_CLASH;
-			db->arg1=sk_find(db->data,(char *)r);
-			db->arg2=i;
-			lh_free(idx);
-			return(0);
-			}
-		}
-	if (db->index[field] != NULL) lh_free(db->index[field]);
-	db->index[field]=idx;
-	db->qual[field]=qual;
-	return(1);
-	}
-
-long TXT_DB_write(BIO *out, TXT_DB *db)
-	{
-	long i,j,n,nn,l,tot=0;
-	char *p,**pp,*f;
-	BUF_MEM *buf=NULL;
-	long ret= -1;
-
-	if ((buf=BUF_MEM_new()) == NULL)
-		goto err;
-	n=sk_num(db->data);
-	nn=db->num_fields;
-	for (i=0; i<n; i++)
-		{
-		pp=(char **)sk_value(db->data,i);
-
-		l=0;
-		for (j=0; j<nn; j++)
-			{
-			if (pp[j] != NULL)
-				l+=strlen(pp[j]);
-			}
-		if (!BUF_MEM_grow_clean(buf,(int)(l*2+nn))) goto err;
-
-		p=buf->data;
-		for (j=0; j<nn; j++)
-			{
-			f=pp[j];
-			if (f != NULL)
-				for (;;) 
-					{
-					if (*f == '\0') break;
-					if (*f == '\t') *(p++)='\\';
-					*(p++)= *(f++);
-					}
-			*(p++)='\t';
-			}
-		p[-1]='\n';
-		j=p-buf->data;
-		if (BIO_write(out,buf->data,(int)j) != j)
-			goto err;
-		tot+=j;
-		}
-	ret=tot;
-err:
-	if (buf != NULL) BUF_MEM_free(buf);
-	return(ret);
-	}
-
-int TXT_DB_insert(TXT_DB *db, char **row)
-	{
-	int i;
-	char **r;
-
-	for (i=0; i<db->num_fields; i++)
-		{
-		if (db->index[i] != NULL)
-			{
-			if ((db->qual[i] != NULL) &&
-				(db->qual[i](row) == 0)) continue;
-			r=(char **)lh_retrieve(db->index[i],row);
-			if (r != NULL)
-				{
-				db->error=DB_ERROR_INDEX_CLASH;
-				db->arg1=i;
-				db->arg_row=r;
-				goto err;
-				}
-			}
-		}
-	/* We have passed the index checks, now just append and insert */
-	if (!sk_push(db->data,(char *)row))
-		{
-		db->error=DB_ERROR_MALLOC;
-		goto err;
-		}
-
-	for (i=0; i<db->num_fields; i++)
-		{
-		if (db->index[i] != NULL)
-			{
-			if ((db->qual[i] != NULL) &&
-				(db->qual[i](row) == 0)) continue;
-			lh_insert(db->index[i],row);
-			}
-		}
-	return(1);
-err:
-	return(0);
-	}
-
-void TXT_DB_free(TXT_DB *db)
-	{
-	int i,n;
-	char **p,*max;
-
-	if(db == NULL)
-	    return;
-
-	if (db->index != NULL)
-		{
-		for (i=db->num_fields-1; i>=0; i--)
-			if (db->index[i] != NULL) lh_free(db->index[i]);
-		OPENSSL_free(db->index);
-		}
-	if (db->qual != NULL)
-		OPENSSL_free(db->qual);
-	if (db->data != NULL)
-		{
-		for (i=sk_num(db->data)-1; i>=0; i--)
-			{
-			/* check if any 'fields' have been allocated
-			 * from outside of the initial block */
-			p=(char **)sk_value(db->data,i);
-			max=p[db->num_fields]; /* last address */
-			if (max == NULL) /* new row */
-				{
-				for (n=0; n<db->num_fields; n++)
-					if (p[n] != NULL) OPENSSL_free(p[n]);
-				}
-			else
-				{
-				for (n=0; n<db->num_fields; n++)
-					{
-					if (((p[n] < (char *)p) || (p[n] > max))
-						&& (p[n] != NULL))
-						OPENSSL_free(p[n]);
-					}
-				}
-			OPENSSL_free(sk_value(db->data,i));
-			}
-		sk_free(db->data);
-		}
-	OPENSSL_free(db);
-	}
diff --git a/crypto/openssl/crypto/txt_db/txt_db.h b/crypto/openssl/crypto/txt_db/txt_db.h
deleted file mode 100644
index 307e1ba23fc2..000000000000
--- a/crypto/openssl/crypto/txt_db/txt_db.h
+++ /dev/null
@@ -1,109 +0,0 @@
-/* crypto/txt_db/txt_db.h */
-/* Copyright (C) 1995-1998 Eric Young (eay@cryptsoft.com)
- * All rights reserved.
- *
- * This package is an SSL implementation written
- * by Eric Young (eay@cryptsoft.com).
- * The implementation was written so as to conform with Netscapes SSL.
- * 
- * This library is free for commercial and non-commercial use as long as
- * the following conditions are aheared to.  The following conditions
- * apply to all code found in this distribution, be it the RC4, RSA,
- * lhash, DES, etc., code; not just the SSL code.  The SSL documentation
- * included with this distribution is covered by the same copyright terms
- * except that the holder is Tim Hudson (tjh@cryptsoft.com).
- * 
- * Copyright remains Eric Young's, and as such any Copyright notices in
- * the code are not to be removed.
- * If this package is used in a product, Eric Young should be given attribution
- * as the author of the parts of the library used.
- * This can be in the form of a textual message at program startup or
- * in documentation (online or textual) provided with the package.
- * 
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions
- * are met:
- * 1. Redistributions of source code must retain the copyright
- *    notice, this list of conditions and the following disclaimer.
- * 2. Redistributions in binary form must reproduce the above copyright
- *    notice, this list of conditions and the following disclaimer in the
- *    documentation and/or other materials provided with the distribution.
- * 3. All advertising materials mentioning features or use of this software
- *    must display the following acknowledgement:
- *    "This product includes cryptographic software written by
- *     Eric Young (eay@cryptsoft.com)"
- *    The word 'cryptographic' can be left out if the rouines from the library
- *    being used are not cryptographic related :-).
- * 4. If you include any Windows specific code (or a derivative thereof) from 
- *    the apps directory (application code) you must include an acknowledgement:
- *    "This product includes software written by Tim Hudson (tjh@cryptsoft.com)"
- * 
- * THIS SOFTWARE IS PROVIDED BY ERIC YOUNG ``AS IS'' AND
- * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
- * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
- * ARE DISCLAIMED.  IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE
- * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
- * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
- * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
- * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
- * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
- * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
- * SUCH DAMAGE.
- * 
- * The licence and distribution terms for any publically available version or
- * derivative of this code cannot be changed.  i.e. this code cannot simply be
- * copied and put under another distribution licence
- * [including the GNU Public Licence.]
- */
-
-#ifndef HEADER_TXT_DB_H
-#define HEADER_TXT_DB_H
-
-#include <openssl/opensslconf.h>
-#ifndef OPENSSL_NO_BIO
-#include <openssl/bio.h>
-#endif
-#include <openssl/stack.h>
-#include <openssl/lhash.h>
-
-#define DB_ERROR_OK			0
-#define DB_ERROR_MALLOC			1
-#define DB_ERROR_INDEX_CLASH    	2
-#define DB_ERROR_INDEX_OUT_OF_RANGE	3
-#define DB_ERROR_NO_INDEX		4
-#define DB_ERROR_INSERT_INDEX_CLASH    	5
-
-#ifdef  __cplusplus
-extern "C" {
-#endif
-
-typedef struct txt_db_st
-	{
-	int num_fields;
-	STACK /* char ** */ *data;
-	LHASH **index;
-	int (**qual)(char **);
-	long error;
-	long arg1;
-	long arg2;
-	char **arg_row;
-	} TXT_DB;
-
-#ifndef OPENSSL_NO_BIO
-TXT_DB *TXT_DB_read(BIO *in, int num);
-long TXT_DB_write(BIO *out, TXT_DB *db);
-#else
-TXT_DB *TXT_DB_read(char *in, int num);
-long TXT_DB_write(char *out, TXT_DB *db);
-#endif
-int TXT_DB_create_index(TXT_DB *db,int field,int (*qual)(char **),
-		LHASH_HASH_FN_TYPE hash, LHASH_COMP_FN_TYPE cmp);
-void TXT_DB_free(TXT_DB *db);
-char **TXT_DB_get_by_index(TXT_DB *db, int idx, char **value);
-int TXT_DB_insert(TXT_DB *db,char **value);
-
-#ifdef  __cplusplus
-}
-#endif
-
-#endif
diff --git a/crypto/openssl/crypto/ui/Makefile b/crypto/openssl/crypto/ui/Makefile
deleted file mode 100644
index a685659fb4c8..000000000000
--- a/crypto/openssl/crypto/ui/Makefile
+++ /dev/null
@@ -1,111 +0,0 @@
-#
-# OpenSSL/crypto/ui/Makefile
-#
-
-DIR=	ui
-TOP=	../..
-CC=	cc
-INCLUDES= -I.. -I$(TOP) -I../../include
-CFLAG=-g
-MAKEFILE=	Makefile
-AR=		ar r
-
-CFLAGS= $(INCLUDES) $(CFLAG)
-
-GENERAL=Makefile
-#TEST= uitest.c
-TEST=
-APPS=
-
-COMPATSRC= ui_compat.c
-COMPATOBJ= ui_compat.o
-
-LIB=$(TOP)/libcrypto.a
-LIBSRC= ui_err.c ui_lib.c ui_openssl.c ui_util.c $(COMPATSRC)
-LIBOBJ= ui_err.o ui_lib.o ui_openssl.o ui_util.o $(COMPATOBJ)
-
-SRC= $(LIBSRC)
-
-EXHEADER= ui.h ui_compat.h
-HEADER=	$(EXHEADER) ui_locl.h
-
-ALL=    $(GENERAL) $(SRC) $(HEADER)
-
-top:
-	(cd ../..; $(MAKE) DIRS=crypto SDIRS=$(DIR) sub_all)
-
-all:	lib
-
-lib:	$(LIBOBJ)
-	$(AR) $(LIB) $(LIBOBJ)
-	$(RANLIB) $(LIB) || echo Never mind.
-	@touch lib
-
-files:
-	$(PERL) $(TOP)/util/files.pl Makefile >> $(TOP)/MINFO
-
-links:
-	@$(PERL) $(TOP)/util/mklink.pl ../../include/openssl $(EXHEADER)
-	@$(PERL) $(TOP)/util/mklink.pl ../../test $(TEST)
-	@$(PERL) $(TOP)/util/mklink.pl ../../apps $(APPS)
-
-install:
-	@[ -n "$(INSTALLTOP)" ] # should be set by top Makefile...
-	@headerlist="$(EXHEADER)"; for i in $$headerlist ; \
-	do  \
-	(cp $$i $(INSTALL_PREFIX)$(INSTALLTOP)/include/openssl/$$i; \
-	chmod 644 $(INSTALL_PREFIX)$(INSTALLTOP)/include/openssl/$$i ); \
-	done;
-
-tags:
-	ctags $(SRC)
-
-tests:
-
-lint:
-	lint -DLINT $(INCLUDES) $(SRC)>fluff
-
-depend:
-	@[ -n "$(MAKEDEPEND)" ] # should be set by upper Makefile...
-	$(MAKEDEPEND) -- $(CFLAG) $(INCLUDES) $(DEPFLAG) -- $(PROGS) $(LIBSRC)
-
-dclean:
-	$(PERL) -pe 'if (/^# DO NOT DELETE THIS LINE/) {print; exit(0);}' $(MAKEFILE) >Makefile.new
-	mv -f Makefile.new $(MAKEFILE)
-
-clean:
-	rm -f *.o */*.o *.obj lib tags core .pure .nfs* *.old *.bak fluff
-
-# DO NOT DELETE THIS LINE -- make depend depends on it.
-
-ui_compat.o: ../../include/openssl/e_os2.h ../../include/openssl/opensslconf.h
-ui_compat.o: ../../include/openssl/ossl_typ.h ../../include/openssl/safestack.h
-ui_compat.o: ../../include/openssl/stack.h ../../include/openssl/ui.h
-ui_compat.o: ../../include/openssl/ui_compat.h ui_compat.c
-ui_err.o: ../../include/openssl/bio.h ../../include/openssl/crypto.h
-ui_err.o: ../../include/openssl/e_os2.h ../../include/openssl/err.h
-ui_err.o: ../../include/openssl/lhash.h ../../include/openssl/opensslconf.h
-ui_err.o: ../../include/openssl/opensslv.h ../../include/openssl/ossl_typ.h
-ui_err.o: ../../include/openssl/safestack.h ../../include/openssl/stack.h
-ui_err.o: ../../include/openssl/symhacks.h ../../include/openssl/ui.h ui_err.c
-ui_lib.o: ../../e_os.h ../../include/openssl/bio.h
-ui_lib.o: ../../include/openssl/buffer.h ../../include/openssl/crypto.h
-ui_lib.o: ../../include/openssl/e_os2.h ../../include/openssl/err.h
-ui_lib.o: ../../include/openssl/lhash.h ../../include/openssl/opensslconf.h
-ui_lib.o: ../../include/openssl/opensslv.h ../../include/openssl/ossl_typ.h
-ui_lib.o: ../../include/openssl/safestack.h ../../include/openssl/stack.h
-ui_lib.o: ../../include/openssl/symhacks.h ../../include/openssl/ui.h
-ui_lib.o: ../cryptlib.h ui_lib.c ui_locl.h
-ui_openssl.o: ../../e_os.h ../../include/openssl/bio.h
-ui_openssl.o: ../../include/openssl/buffer.h ../../include/openssl/crypto.h
-ui_openssl.o: ../../include/openssl/e_os2.h ../../include/openssl/err.h
-ui_openssl.o: ../../include/openssl/lhash.h ../../include/openssl/opensslconf.h
-ui_openssl.o: ../../include/openssl/opensslv.h ../../include/openssl/ossl_typ.h
-ui_openssl.o: ../../include/openssl/safestack.h ../../include/openssl/stack.h
-ui_openssl.o: ../../include/openssl/symhacks.h ../../include/openssl/ui.h
-ui_openssl.o: ../cryptlib.h ui_locl.h ui_openssl.c
-ui_util.o: ../../include/openssl/crypto.h ../../include/openssl/e_os2.h
-ui_util.o: ../../include/openssl/opensslconf.h ../../include/openssl/opensslv.h
-ui_util.o: ../../include/openssl/ossl_typ.h ../../include/openssl/safestack.h
-ui_util.o: ../../include/openssl/stack.h ../../include/openssl/symhacks.h
-ui_util.o: ../../include/openssl/ui.h ui_locl.h ui_util.c
diff --git a/crypto/openssl/crypto/ui/ui.h b/crypto/openssl/crypto/ui/ui.h
deleted file mode 100644
index 018296412b18..000000000000
--- a/crypto/openssl/crypto/ui/ui.h
+++ /dev/null
@@ -1,381 +0,0 @@
-/* crypto/ui/ui.h -*- mode:C; c-file-style: "eay" -*- */
-/* Written by Richard Levitte (richard@levitte.org) for the OpenSSL
- * project 2001.
- */
-/* ====================================================================
- * Copyright (c) 2001 The OpenSSL Project.  All rights reserved.
- *
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions
- * are met:
- *
- * 1. Redistributions of source code must retain the above copyright
- *    notice, this list of conditions and the following disclaimer. 
- *
- * 2. Redistributions in binary form must reproduce the above copyright
- *    notice, this list of conditions and the following disclaimer in
- *    the documentation and/or other materials provided with the
- *    distribution.
- *
- * 3. All advertising materials mentioning features or use of this
- *    software must display the following acknowledgment:
- *    "This product includes software developed by the OpenSSL Project
- *    for use in the OpenSSL Toolkit. (http://www.openssl.org/)"
- *
- * 4. The names "OpenSSL Toolkit" and "OpenSSL Project" must not be used to
- *    endorse or promote products derived from this software without
- *    prior written permission. For written permission, please contact
- *    openssl-core@openssl.org.
- *
- * 5. Products derived from this software may not be called "OpenSSL"
- *    nor may "OpenSSL" appear in their names without prior written
- *    permission of the OpenSSL Project.
- *
- * 6. Redistributions of any form whatsoever must retain the following
- *    acknowledgment:
- *    "This product includes software developed by the OpenSSL Project
- *    for use in the OpenSSL Toolkit (http://www.openssl.org/)"
- *
- * THIS SOFTWARE IS PROVIDED BY THE OpenSSL PROJECT ``AS IS'' AND ANY
- * EXPRESSED OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
- * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR
- * PURPOSE ARE DISCLAIMED.  IN NO EVENT SHALL THE OpenSSL PROJECT OR
- * ITS CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
- * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
- * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
- * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
- * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
- * STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
- * ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED
- * OF THE POSSIBILITY OF SUCH DAMAGE.
- * ====================================================================
- *
- * This product includes cryptographic software written by Eric Young
- * (eay@cryptsoft.com).  This product includes software written by Tim
- * Hudson (tjh@cryptsoft.com).
- *
- */
-
-#ifndef HEADER_UI_H
-#define HEADER_UI_H
-
-#ifndef OPENSSL_NO_DEPRECATED
-#include <openssl/crypto.h>
-#endif
-#include <openssl/safestack.h>
-#include <openssl/ossl_typ.h>
-
-#ifdef  __cplusplus
-extern "C" {
-#endif
-
-/* Declared already in ossl_typ.h */
-/* typedef struct ui_st UI; */
-/* typedef struct ui_method_st UI_METHOD; */
-
-
-/* All the following functions return -1 or NULL on error and in some cases
-   (UI_process()) -2 if interrupted or in some other way cancelled.
-   When everything is fine, they return 0, a positive value or a non-NULL
-   pointer, all depending on their purpose. */
-
-/* Creators and destructor.   */
-UI *UI_new(void);
-UI *UI_new_method(const UI_METHOD *method);
-void UI_free(UI *ui);
-
-/* The following functions are used to add strings to be printed and prompt
-   strings to prompt for data.  The names are UI_{add,dup}_<function>_string
-   and UI_{add,dup}_input_boolean.
-
-   UI_{add,dup}_<function>_string have the following meanings:
-	add	add a text or prompt string.  The pointers given to these
-		functions are used verbatim, no copying is done.
-	dup	make a copy of the text or prompt string, then add the copy
-		to the collection of strings in the user interface.
-	<function>
-		The function is a name for the functionality that the given
-		string shall be used for.  It can be one of:
-			input	use the string as data prompt.
-			verify	use the string as verification prompt.  This
-				is used to verify a previous input.
-			info	use the string for informational output.
-			error	use the string for error output.
-   Honestly, there's currently no difference between info and error for the
-   moment.
-
-   UI_{add,dup}_input_boolean have the same semantics for "add" and "dup",
-   and are typically used when one wants to prompt for a yes/no response.
-
-
-   All of the functions in this group take a UI and a prompt string.
-   The string input and verify addition functions also take a flag argument,
-   a buffer for the result to end up with, a minimum input size and a maximum
-   input size (the result buffer MUST be large enough to be able to contain
-   the maximum number of characters).  Additionally, the verify addition
-   functions takes another buffer to compare the result against.
-   The boolean input functions take an action description string (which should
-   be safe to ignore if the expected user action is obvious, for example with
-   a dialog box with an OK button and a Cancel button), a string of acceptable
-   characters to mean OK and to mean Cancel.  The two last strings are checked
-   to make sure they don't have common characters.  Additionally, the same
-   flag argument as for the string input is taken, as well as a result buffer.
-   The result buffer is required to be at least one byte long.  Depending on
-   the answer, the first character from the OK or the Cancel character strings
-   will be stored in the first byte of the result buffer.  No NUL will be
-   added, so the result is *not* a string.
-
-   On success, the all return an index of the added information.  That index
-   is usefull when retrieving results with UI_get0_result(). */
-int UI_add_input_string(UI *ui, const char *prompt, int flags,
-	char *result_buf, int minsize, int maxsize);
-int UI_dup_input_string(UI *ui, const char *prompt, int flags,
-	char *result_buf, int minsize, int maxsize);
-int UI_add_verify_string(UI *ui, const char *prompt, int flags,
-	char *result_buf, int minsize, int maxsize, const char *test_buf);
-int UI_dup_verify_string(UI *ui, const char *prompt, int flags,
-	char *result_buf, int minsize, int maxsize, const char *test_buf);
-int UI_add_input_boolean(UI *ui, const char *prompt, const char *action_desc,
-	const char *ok_chars, const char *cancel_chars,
-	int flags, char *result_buf);
-int UI_dup_input_boolean(UI *ui, const char *prompt, const char *action_desc,
-	const char *ok_chars, const char *cancel_chars,
-	int flags, char *result_buf);
-int UI_add_info_string(UI *ui, const char *text);
-int UI_dup_info_string(UI *ui, const char *text);
-int UI_add_error_string(UI *ui, const char *text);
-int UI_dup_error_string(UI *ui, const char *text);
-
-/* These are the possible flags.  They can be or'ed together. */
-/* Use to have echoing of input */
-#define UI_INPUT_FLAG_ECHO		0x01
-/* Use a default password.  Where that password is found is completely
-   up to the application, it might for example be in the user data set
-   with UI_add_user_data().  It is not recommended to have more than
-   one input in each UI being marked with this flag, or the application
-   might get confused. */
-#define UI_INPUT_FLAG_DEFAULT_PWD	0x02
-
-/* The user of these routines may want to define flags of their own.  The core
-   UI won't look at those, but will pass them on to the method routines.  They
-   must use higher bits so they don't get confused with the UI bits above.
-   UI_INPUT_FLAG_USER_BASE tells which is the lowest bit to use.  A good
-   example of use is this:
-
-	#define MY_UI_FLAG1	(0x01 << UI_INPUT_FLAG_USER_BASE)
-
-*/
-#define UI_INPUT_FLAG_USER_BASE	16
-
-
-/* The following function helps construct a prompt.  object_desc is a
-   textual short description of the object, for example "pass phrase",
-   and object_name is the name of the object (might be a card name or
-   a file name.
-   The returned string shall always be allocated on the heap with
-   OPENSSL_malloc(), and need to be free'd with OPENSSL_free().
-
-   If the ui_method doesn't contain a pointer to a user-defined prompt
-   constructor, a default string is built, looking like this:
-
-	"Enter {object_desc} for {object_name}:"
-
-   So, if object_desc has the value "pass phrase" and object_name has
-   the value "foo.key", the resulting string is:
-
-	"Enter pass phrase for foo.key:"
-*/
-char *UI_construct_prompt(UI *ui_method,
-	const char *object_desc, const char *object_name);
-
-
-/* The following function is used to store a pointer to user-specific data.
-   Any previous such pointer will be returned and replaced.
-
-   For callback purposes, this function makes a lot more sense than using
-   ex_data, since the latter requires that different parts of OpenSSL or
-   applications share the same ex_data index.
-
-   Note that the UI_OpenSSL() method completely ignores the user data.
-   Other methods may not, however.  */
-void *UI_add_user_data(UI *ui, void *user_data);
-/* We need a user data retrieving function as well.  */
-void *UI_get0_user_data(UI *ui);
-
-/* Return the result associated with a prompt given with the index i. */
-const char *UI_get0_result(UI *ui, int i);
-
-/* When all strings have been added, process the whole thing. */
-int UI_process(UI *ui);
-
-/* Give a user interface parametrised control commands.  This can be used to
-   send down an integer, a data pointer or a function pointer, as well as
-   be used to get information from a UI. */
-int UI_ctrl(UI *ui, int cmd, long i, void *p, void (*f)(void));
-
-/* The commands */
-/* Use UI_CONTROL_PRINT_ERRORS with the value 1 to have UI_process print the
-   OpenSSL error stack before printing any info or added error messages and
-   before any prompting. */
-#define UI_CTRL_PRINT_ERRORS		1
-/* Check if a UI_process() is possible to do again with the same instance of
-   a user interface.  This makes UI_ctrl() return 1 if it is redoable, and 0
-   if not. */
-#define UI_CTRL_IS_REDOABLE		2
-
-
-/* Some methods may use extra data */
-#define UI_set_app_data(s,arg)         UI_set_ex_data(s,0,arg)
-#define UI_get_app_data(s)             UI_get_ex_data(s,0)
-int UI_get_ex_new_index(long argl, void *argp, CRYPTO_EX_new *new_func,
-	CRYPTO_EX_dup *dup_func, CRYPTO_EX_free *free_func);
-int UI_set_ex_data(UI *r,int idx,void *arg);
-void *UI_get_ex_data(UI *r, int idx);
-
-/* Use specific methods instead of the built-in one */
-void UI_set_default_method(const UI_METHOD *meth);
-const UI_METHOD *UI_get_default_method(void);
-const UI_METHOD *UI_get_method(UI *ui);
-const UI_METHOD *UI_set_method(UI *ui, const UI_METHOD *meth);
-
-/* The method with all the built-in thingies */
-UI_METHOD *UI_OpenSSL(void);
-
-
-/* ---------- For method writers ---------- */
-/* A method contains a number of functions that implement the low level
-   of the User Interface.  The functions are:
-
-	an opener	This function starts a session, maybe by opening
-			a channel to a tty, or by opening a window.
-	a writer	This function is called to write a given string,
-			maybe to the tty, maybe as a field label in a
-			window.
-	a flusher	This function is called to flush everything that
-			has been output so far.  It can be used to actually
-			display a dialog box after it has been built.
-	a reader	This function is called to read a given prompt,
-			maybe from the tty, maybe from a field in a
-			window.  Note that it's called wth all string
-			structures, not only the prompt ones, so it must
-			check such things itself.
-	a closer	This function closes the session, maybe by closing
-			the channel to the tty, or closing the window.
-
-   All these functions are expected to return:
-
-	0	on error.
-	1	on success.
-	-1	on out-of-band events, for example if some prompting has
-		been canceled (by pressing Ctrl-C, for example).  This is
-		only checked when returned by the flusher or the reader.
-
-   The way this is used, the opener is first called, then the writer for all
-   strings, then the flusher, then the reader for all strings and finally the
-   closer.  Note that if you want to prompt from a terminal or other command
-   line interface, the best is to have the reader also write the prompts
-   instead of having the writer do it.  If you want to prompt from a dialog
-   box, the writer can be used to build up the contents of the box, and the
-   flusher to actually display the box and run the event loop until all data
-   has been given, after which the reader only grabs the given data and puts
-   them back into the UI strings.
-
-   All method functions take a UI as argument.  Additionally, the writer and
-   the reader take a UI_STRING.
-*/
-
-/* The UI_STRING type is the data structure that contains all the needed info
-   about a string or a prompt, including test data for a verification prompt.
-*/
-DECLARE_STACK_OF(UI_STRING)
-typedef struct ui_string_st UI_STRING;
-
-/* The different types of strings that are currently supported.
-   This is only needed by method authors. */
-enum UI_string_types
-	{
-	UIT_NONE=0,
-	UIT_PROMPT,		/* Prompt for a string */
-	UIT_VERIFY,		/* Prompt for a string and verify */
-	UIT_BOOLEAN,		/* Prompt for a yes/no response */
-	UIT_INFO,		/* Send info to the user */
-	UIT_ERROR		/* Send an error message to the user */
-	};
-
-/* Create and manipulate methods */
-UI_METHOD *UI_create_method(char *name);
-void UI_destroy_method(UI_METHOD *ui_method);
-int UI_method_set_opener(UI_METHOD *method, int (*opener)(UI *ui));
-int UI_method_set_writer(UI_METHOD *method, int (*writer)(UI *ui, UI_STRING *uis));
-int UI_method_set_flusher(UI_METHOD *method, int (*flusher)(UI *ui));
-int UI_method_set_reader(UI_METHOD *method, int (*reader)(UI *ui, UI_STRING *uis));
-int UI_method_set_closer(UI_METHOD *method, int (*closer)(UI *ui));
-int (*UI_method_get_opener(UI_METHOD *method))(UI*);
-int (*UI_method_get_writer(UI_METHOD *method))(UI*,UI_STRING*);
-int (*UI_method_get_flusher(UI_METHOD *method))(UI*);
-int (*UI_method_get_reader(UI_METHOD *method))(UI*,UI_STRING*);
-int (*UI_method_get_closer(UI_METHOD *method))(UI*);
-
-/* The following functions are helpers for method writers to access relevant
-   data from a UI_STRING. */
-
-/* Return type of the UI_STRING */
-enum UI_string_types UI_get_string_type(UI_STRING *uis);
-/* Return input flags of the UI_STRING */
-int UI_get_input_flags(UI_STRING *uis);
-/* Return the actual string to output (the prompt, info or error) */
-const char *UI_get0_output_string(UI_STRING *uis);
-/* Return the optional action string to output (the boolean promtp instruction) */
-const char *UI_get0_action_string(UI_STRING *uis);
-/* Return the result of a prompt */
-const char *UI_get0_result_string(UI_STRING *uis);
-/* Return the string to test the result against.  Only useful with verifies. */
-const char *UI_get0_test_string(UI_STRING *uis);
-/* Return the required minimum size of the result */
-int UI_get_result_minsize(UI_STRING *uis);
-/* Return the required maximum size of the result */
-int UI_get_result_maxsize(UI_STRING *uis);
-/* Set the result of a UI_STRING. */
-int UI_set_result(UI *ui, UI_STRING *uis, const char *result);
-
-
-/* A couple of popular utility functions */
-int UI_UTIL_read_pw_string(char *buf,int length,const char *prompt,int verify);
-int UI_UTIL_read_pw(char *buf,char *buff,int size,const char *prompt,int verify);
-
-
-/* BEGIN ERROR CODES */
-/* The following lines are auto generated by the script mkerr.pl. Any changes
- * made after this point may be overwritten when the script is next run.
- */
-void ERR_load_UI_strings(void);
-
-/* Error codes for the UI functions. */
-
-/* Function codes. */
-#define UI_F_GENERAL_ALLOCATE_BOOLEAN			 108
-#define UI_F_GENERAL_ALLOCATE_PROMPT			 109
-#define UI_F_GENERAL_ALLOCATE_STRING			 100
-#define UI_F_UI_CTRL					 111
-#define UI_F_UI_DUP_ERROR_STRING			 101
-#define UI_F_UI_DUP_INFO_STRING				 102
-#define UI_F_UI_DUP_INPUT_BOOLEAN			 110
-#define UI_F_UI_DUP_INPUT_STRING			 103
-#define UI_F_UI_DUP_VERIFY_STRING			 106
-#define UI_F_UI_GET0_RESULT				 107
-#define UI_F_UI_NEW_METHOD				 104
-#define UI_F_UI_SET_RESULT				 105
-
-/* Reason codes. */
-#define UI_R_COMMON_OK_AND_CANCEL_CHARACTERS		 104
-#define UI_R_INDEX_TOO_LARGE				 102
-#define UI_R_INDEX_TOO_SMALL				 103
-#define UI_R_NO_RESULT_BUFFER				 105
-#define UI_R_RESULT_TOO_LARGE				 100
-#define UI_R_RESULT_TOO_SMALL				 101
-#define UI_R_UNKNOWN_CONTROL_COMMAND			 106
-
-#ifdef  __cplusplus
-}
-#endif
-#endif
diff --git a/crypto/openssl/crypto/ui/ui_compat.c b/crypto/openssl/crypto/ui/ui_compat.c
deleted file mode 100644
index 13e0f70d9091..000000000000
--- a/crypto/openssl/crypto/ui/ui_compat.c
+++ /dev/null
@@ -1,67 +0,0 @@
-/* crypto/ui/ui_compat.c -*- mode:C; c-file-style: "eay" -*- */
-/* ====================================================================
- * Copyright (c) 2001-2002 The OpenSSL Project.  All rights reserved.
- *
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions
- * are met:
- *
- * 1. Redistributions of source code must retain the above copyright
- *    notice, this list of conditions and the following disclaimer. 
- *
- * 2. Redistributions in binary form must reproduce the above copyright
- *    notice, this list of conditions and the following disclaimer in
- *    the documentation and/or other materials provided with the
- *    distribution.
- *
- * 3. All advertising materials mentioning features or use of this
- *    software must display the following acknowledgment:
- *    "This product includes software developed by the OpenSSL Project
- *    for use in the OpenSSL Toolkit. (http://www.openssl.org/)"
- *
- * 4. The names "OpenSSL Toolkit" and "OpenSSL Project" must not be used to
- *    endorse or promote products derived from this software without
- *    prior written permission. For written permission, please contact
- *    openssl-core@openssl.org.
- *
- * 5. Products derived from this software may not be called "OpenSSL"
- *    nor may "OpenSSL" appear in their names without prior written
- *    permission of the OpenSSL Project.
- *
- * 6. Redistributions of any form whatsoever must retain the following
- *    acknowledgment:
- *    "This product includes software developed by the OpenSSL Project
- *    for use in the OpenSSL Toolkit (http://www.openssl.org/)"
- *
- * THIS SOFTWARE IS PROVIDED BY THE OpenSSL PROJECT ``AS IS'' AND ANY
- * EXPRESSED OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
- * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR
- * PURPOSE ARE DISCLAIMED.  IN NO EVENT SHALL THE OpenSSL PROJECT OR
- * ITS CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
- * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
- * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
- * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
- * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
- * STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
- * ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED
- * OF THE POSSIBILITY OF SUCH DAMAGE.
- * ====================================================================
- *
- * This product includes cryptographic software written by Eric Young
- * (eay@cryptsoft.com).  This product includes software written by Tim
- * Hudson (tjh@cryptsoft.com).
- *
- */
-
-#include <string.h>
-#include <openssl/ui_compat.h>
-
-int _ossl_old_des_read_pw_string(char *buf,int length,const char *prompt,int verify)
-	{
-	return UI_UTIL_read_pw_string(buf, length, prompt, verify);
-	}
-
-int _ossl_old_des_read_pw(char *buf,char *buff,int size,const char *prompt,int verify)
-	{
-	return UI_UTIL_read_pw(buf, buff, size, prompt, verify);
-	}
diff --git a/crypto/openssl/crypto/ui/ui_compat.h b/crypto/openssl/crypto/ui/ui_compat.h
deleted file mode 100644
index b35c9bb7fd31..000000000000
--- a/crypto/openssl/crypto/ui/ui_compat.h
+++ /dev/null
@@ -1,83 +0,0 @@
-/* crypto/ui/ui.h -*- mode:C; c-file-style: "eay" -*- */
-/* Written by Richard Levitte (richard@levitte.org) for the OpenSSL
- * project 2001.
- */
-/* ====================================================================
- * Copyright (c) 2001 The OpenSSL Project.  All rights reserved.
- *
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions
- * are met:
- *
- * 1. Redistributions of source code must retain the above copyright
- *    notice, this list of conditions and the following disclaimer. 
- *
- * 2. Redistributions in binary form must reproduce the above copyright
- *    notice, this list of conditions and the following disclaimer in
- *    the documentation and/or other materials provided with the
- *    distribution.
- *
- * 3. All advertising materials mentioning features or use of this
- *    software must display the following acknowledgment:
- *    "This product includes software developed by the OpenSSL Project
- *    for use in the OpenSSL Toolkit. (http://www.openssl.org/)"
- *
- * 4. The names "OpenSSL Toolkit" and "OpenSSL Project" must not be used to
- *    endorse or promote products derived from this software without
- *    prior written permission. For written permission, please contact
- *    openssl-core@openssl.org.
- *
- * 5. Products derived from this software may not be called "OpenSSL"
- *    nor may "OpenSSL" appear in their names without prior written
- *    permission of the OpenSSL Project.
- *
- * 6. Redistributions of any form whatsoever must retain the following
- *    acknowledgment:
- *    "This product includes software developed by the OpenSSL Project
- *    for use in the OpenSSL Toolkit (http://www.openssl.org/)"
- *
- * THIS SOFTWARE IS PROVIDED BY THE OpenSSL PROJECT ``AS IS'' AND ANY
- * EXPRESSED OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
- * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR
- * PURPOSE ARE DISCLAIMED.  IN NO EVENT SHALL THE OpenSSL PROJECT OR
- * ITS CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
- * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
- * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
- * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
- * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
- * STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
- * ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED
- * OF THE POSSIBILITY OF SUCH DAMAGE.
- * ====================================================================
- *
- * This product includes cryptographic software written by Eric Young
- * (eay@cryptsoft.com).  This product includes software written by Tim
- * Hudson (tjh@cryptsoft.com).
- *
- */
-
-#ifndef HEADER_UI_COMPAT_H
-#define HEADER_UI_COMPAT_H
-
-#include <openssl/opensslconf.h>
-#include <openssl/ui.h>
-
-#ifdef  __cplusplus
-extern "C" {
-#endif
-
-/* The following functions were previously part of the DES section,
-   and are provided here for backward compatibility reasons. */
-
-#define des_read_pw_string(b,l,p,v) \
-	_ossl_old_des_read_pw_string((b),(l),(p),(v))
-#define des_read_pw(b,bf,s,p,v) \
-	_ossl_old_des_read_pw((b),(bf),(s),(p),(v))
-
-int _ossl_old_des_read_pw_string(char *buf,int length,const char *prompt,int verify);
-int _ossl_old_des_read_pw(char *buf,char *buff,int size,const char *prompt,int verify);
-
-#ifdef  __cplusplus
-}
-#endif
-#endif
diff --git a/crypto/openssl/crypto/ui/ui_err.c b/crypto/openssl/crypto/ui/ui_err.c
deleted file mode 100644
index 786bd0dbc3b9..000000000000
--- a/crypto/openssl/crypto/ui/ui_err.c
+++ /dev/null
@@ -1,112 +0,0 @@
-/* crypto/ui/ui_err.c */
-/* ====================================================================
- * Copyright (c) 1999-2005 The OpenSSL Project.  All rights reserved.
- *
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions
- * are met:
- *
- * 1. Redistributions of source code must retain the above copyright
- *    notice, this list of conditions and the following disclaimer. 
- *
- * 2. Redistributions in binary form must reproduce the above copyright
- *    notice, this list of conditions and the following disclaimer in
- *    the documentation and/or other materials provided with the
- *    distribution.
- *
- * 3. All advertising materials mentioning features or use of this
- *    software must display the following acknowledgment:
- *    "This product includes software developed by the OpenSSL Project
- *    for use in the OpenSSL Toolkit. (http://www.OpenSSL.org/)"
- *
- * 4. The names "OpenSSL Toolkit" and "OpenSSL Project" must not be used to
- *    endorse or promote products derived from this software without
- *    prior written permission. For written permission, please contact
- *    openssl-core@OpenSSL.org.
- *
- * 5. Products derived from this software may not be called "OpenSSL"
- *    nor may "OpenSSL" appear in their names without prior written
- *    permission of the OpenSSL Project.
- *
- * 6. Redistributions of any form whatsoever must retain the following
- *    acknowledgment:
- *    "This product includes software developed by the OpenSSL Project
- *    for use in the OpenSSL Toolkit (http://www.OpenSSL.org/)"
- *
- * THIS SOFTWARE IS PROVIDED BY THE OpenSSL PROJECT ``AS IS'' AND ANY
- * EXPRESSED OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
- * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR
- * PURPOSE ARE DISCLAIMED.  IN NO EVENT SHALL THE OpenSSL PROJECT OR
- * ITS CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
- * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
- * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
- * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
- * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
- * STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
- * ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED
- * OF THE POSSIBILITY OF SUCH DAMAGE.
- * ====================================================================
- *
- * This product includes cryptographic software written by Eric Young
- * (eay@cryptsoft.com).  This product includes software written by Tim
- * Hudson (tjh@cryptsoft.com).
- *
- */
-
-/* NOTE: this file was auto generated by the mkerr.pl script: any changes
- * made to it will be overwritten when the script next updates this file,
- * only reason strings will be preserved.
- */
-
-#include <stdio.h>
-#include <openssl/err.h>
-#include <openssl/ui.h>
-
-/* BEGIN ERROR CODES */
-#ifndef OPENSSL_NO_ERR
-
-#define ERR_FUNC(func) ERR_PACK(ERR_LIB_UI,func,0)
-#define ERR_REASON(reason) ERR_PACK(ERR_LIB_UI,0,reason)
-
-static ERR_STRING_DATA UI_str_functs[]=
-	{
-{ERR_FUNC(UI_F_GENERAL_ALLOCATE_BOOLEAN),	"GENERAL_ALLOCATE_BOOLEAN"},
-{ERR_FUNC(UI_F_GENERAL_ALLOCATE_PROMPT),	"GENERAL_ALLOCATE_PROMPT"},
-{ERR_FUNC(UI_F_GENERAL_ALLOCATE_STRING),	"GENERAL_ALLOCATE_STRING"},
-{ERR_FUNC(UI_F_UI_CTRL),	"UI_ctrl"},
-{ERR_FUNC(UI_F_UI_DUP_ERROR_STRING),	"UI_dup_error_string"},
-{ERR_FUNC(UI_F_UI_DUP_INFO_STRING),	"UI_dup_info_string"},
-{ERR_FUNC(UI_F_UI_DUP_INPUT_BOOLEAN),	"UI_dup_input_boolean"},
-{ERR_FUNC(UI_F_UI_DUP_INPUT_STRING),	"UI_dup_input_string"},
-{ERR_FUNC(UI_F_UI_DUP_VERIFY_STRING),	"UI_dup_verify_string"},
-{ERR_FUNC(UI_F_UI_GET0_RESULT),	"UI_get0_result"},
-{ERR_FUNC(UI_F_UI_NEW_METHOD),	"UI_new_method"},
-{ERR_FUNC(UI_F_UI_SET_RESULT),	"UI_set_result"},
-{0,NULL}
-	};
-
-static ERR_STRING_DATA UI_str_reasons[]=
-	{
-{ERR_REASON(UI_R_COMMON_OK_AND_CANCEL_CHARACTERS),"common ok and cancel characters"},
-{ERR_REASON(UI_R_INDEX_TOO_LARGE)        ,"index too large"},
-{ERR_REASON(UI_R_INDEX_TOO_SMALL)        ,"index too small"},
-{ERR_REASON(UI_R_NO_RESULT_BUFFER)       ,"no result buffer"},
-{ERR_REASON(UI_R_RESULT_TOO_LARGE)       ,"result too large"},
-{ERR_REASON(UI_R_RESULT_TOO_SMALL)       ,"result too small"},
-{ERR_REASON(UI_R_UNKNOWN_CONTROL_COMMAND),"unknown control command"},
-{0,NULL}
-	};
-
-#endif
-
-void ERR_load_UI_strings(void)
-	{
-#ifndef OPENSSL_NO_ERR
-
-	if (ERR_func_error_string(UI_str_functs[0].error) == NULL)
-		{
-		ERR_load_strings(0,UI_str_functs);
-		ERR_load_strings(0,UI_str_reasons);
-		}
-#endif
-	}
diff --git a/crypto/openssl/crypto/ui/ui_lib.c b/crypto/openssl/crypto/ui/ui_lib.c
deleted file mode 100644
index 7ab249c3be32..000000000000
--- a/crypto/openssl/crypto/ui/ui_lib.c
+++ /dev/null
@@ -1,904 +0,0 @@
-/* crypto/ui/ui_lib.c -*- mode:C; c-file-style: "eay" -*- */
-/* Written by Richard Levitte (richard@levitte.org) for the OpenSSL
- * project 2001.
- */
-/* ====================================================================
- * Copyright (c) 2001 The OpenSSL Project.  All rights reserved.
- *
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions
- * are met:
- *
- * 1. Redistributions of source code must retain the above copyright
- *    notice, this list of conditions and the following disclaimer. 
- *
- * 2. Redistributions in binary form must reproduce the above copyright
- *    notice, this list of conditions and the following disclaimer in
- *    the documentation and/or other materials provided with the
- *    distribution.
- *
- * 3. All advertising materials mentioning features or use of this
- *    software must display the following acknowledgment:
- *    "This product includes software developed by the OpenSSL Project
- *    for use in the OpenSSL Toolkit. (http://www.openssl.org/)"
- *
- * 4. The names "OpenSSL Toolkit" and "OpenSSL Project" must not be used to
- *    endorse or promote products derived from this software without
- *    prior written permission. For written permission, please contact
- *    openssl-core@openssl.org.
- *
- * 5. Products derived from this software may not be called "OpenSSL"
- *    nor may "OpenSSL" appear in their names without prior written
- *    permission of the OpenSSL Project.
- *
- * 6. Redistributions of any form whatsoever must retain the following
- *    acknowledgment:
- *    "This product includes software developed by the OpenSSL Project
- *    for use in the OpenSSL Toolkit (http://www.openssl.org/)"
- *
- * THIS SOFTWARE IS PROVIDED BY THE OpenSSL PROJECT ``AS IS'' AND ANY
- * EXPRESSED OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
- * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR
- * PURPOSE ARE DISCLAIMED.  IN NO EVENT SHALL THE OpenSSL PROJECT OR
- * ITS CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
- * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
- * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
- * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
- * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
- * STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
- * ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED
- * OF THE POSSIBILITY OF SUCH DAMAGE.
- * ====================================================================
- *
- * This product includes cryptographic software written by Eric Young
- * (eay@cryptsoft.com).  This product includes software written by Tim
- * Hudson (tjh@cryptsoft.com).
- *
- */
-
-#include <string.h>
-#include "cryptlib.h"
-#include <openssl/e_os2.h>
-#include <openssl/buffer.h>
-#include <openssl/ui.h>
-#include <openssl/err.h>
-#include "ui_locl.h"
-
-IMPLEMENT_STACK_OF(UI_STRING_ST)
-
-static const UI_METHOD *default_UI_meth=NULL;
-
-UI *UI_new(void)
-	{
-	return(UI_new_method(NULL));
-	}
-
-UI *UI_new_method(const UI_METHOD *method)
-	{
-	UI *ret;
-
-	ret=(UI *)OPENSSL_malloc(sizeof(UI));
-	if (ret == NULL)
-		{
-		UIerr(UI_F_UI_NEW_METHOD,ERR_R_MALLOC_FAILURE);
-		return NULL;
-		}
-	if (method == NULL)
-		ret->meth=UI_get_default_method();
-	else
-		ret->meth=method;
-
-	ret->strings=NULL;
-	ret->user_data=NULL;
-	CRYPTO_new_ex_data(CRYPTO_EX_INDEX_UI, ret, &ret->ex_data);
-	return ret;
-	}
-
-static void free_string(UI_STRING *uis)
-	{
-	if (uis->flags & OUT_STRING_FREEABLE)
-		{
-		OPENSSL_free((char *)uis->out_string);
-		switch(uis->type)
-			{
-		case UIT_BOOLEAN:
-			OPENSSL_free((char *)uis->_.boolean_data.action_desc);
-			OPENSSL_free((char *)uis->_.boolean_data.ok_chars);
-			OPENSSL_free((char *)uis->_.boolean_data.cancel_chars);
-			break;
-		default:
-			break;
-			}
-		}
-	OPENSSL_free(uis);
-	}
-
-void UI_free(UI *ui)
-	{
-	if (ui == NULL)
-		return;
-	sk_UI_STRING_pop_free(ui->strings,free_string);
-	CRYPTO_free_ex_data(CRYPTO_EX_INDEX_UI, ui, &ui->ex_data);
-	OPENSSL_free(ui);
-	}
-
-static int allocate_string_stack(UI *ui)
-	{
-	if (ui->strings == NULL)
-		{
-		ui->strings=sk_UI_STRING_new_null();
-		if (ui->strings == NULL)
-			{
-			return -1;
-			}
-		}
-	return 0;
-	}
-
-static UI_STRING *general_allocate_prompt(UI *ui, const char *prompt,
-	int prompt_freeable, enum UI_string_types type, int input_flags,
-	char *result_buf)
-	{
-	UI_STRING *ret = NULL;
-
-	if (prompt == NULL)
-		{
-		UIerr(UI_F_GENERAL_ALLOCATE_PROMPT,ERR_R_PASSED_NULL_PARAMETER);
-		}
-	else if ((type == UIT_PROMPT || type == UIT_VERIFY
-			 || type == UIT_BOOLEAN) && result_buf == NULL)
-		{
-		UIerr(UI_F_GENERAL_ALLOCATE_PROMPT,UI_R_NO_RESULT_BUFFER);
-		}
-	else if ((ret = (UI_STRING *)OPENSSL_malloc(sizeof(UI_STRING))))
-		{
-		ret->out_string=prompt;
-		ret->flags=prompt_freeable ? OUT_STRING_FREEABLE : 0;
-		ret->input_flags=input_flags;
-		ret->type=type;
-		ret->result_buf=result_buf;
-		}
-	return ret;
-	}
-
-static int general_allocate_string(UI *ui, const char *prompt,
-	int prompt_freeable, enum UI_string_types type, int input_flags,
-	char *result_buf, int minsize, int maxsize, const char *test_buf)
-	{
-	int ret = -1;
-	UI_STRING *s = general_allocate_prompt(ui, prompt, prompt_freeable,
-		type, input_flags, result_buf);
-
-	if (s)
-		{
-		if (allocate_string_stack(ui) >= 0)
-			{
-			s->_.string_data.result_minsize=minsize;
-			s->_.string_data.result_maxsize=maxsize;
-			s->_.string_data.test_buf=test_buf;
-			ret=sk_UI_STRING_push(ui->strings, s);
-			/* sk_push() returns 0 on error.  Let's addapt that */
-			if (ret <= 0) ret--;
-			}
-		else
-			free_string(s);
-		}
-	return ret;
-	}
-
-static int general_allocate_boolean(UI *ui,
-	const char *prompt, const char *action_desc,
-	const char *ok_chars, const char *cancel_chars,
-	int prompt_freeable, enum UI_string_types type, int input_flags,
-	char *result_buf)
-	{
-	int ret = -1;
-	UI_STRING *s;
-	const char *p;
-
-	if (ok_chars == NULL)
-		{
-		UIerr(UI_F_GENERAL_ALLOCATE_BOOLEAN,ERR_R_PASSED_NULL_PARAMETER);
-		}
-	else if (cancel_chars == NULL)
-		{
-		UIerr(UI_F_GENERAL_ALLOCATE_BOOLEAN,ERR_R_PASSED_NULL_PARAMETER);
-		}
-	else
-		{
-		for(p = ok_chars; *p; p++)
-			{
-			if (strchr(cancel_chars, *p))
-				{
-				UIerr(UI_F_GENERAL_ALLOCATE_BOOLEAN,
-					UI_R_COMMON_OK_AND_CANCEL_CHARACTERS);
-				}
-			}
-
-		s = general_allocate_prompt(ui, prompt, prompt_freeable,
-			type, input_flags, result_buf);
-
-		if (s)
-			{
-			if (allocate_string_stack(ui) >= 0)
-				{
-				s->_.boolean_data.action_desc = action_desc;
-				s->_.boolean_data.ok_chars = ok_chars;
-				s->_.boolean_data.cancel_chars = cancel_chars;
-				ret=sk_UI_STRING_push(ui->strings, s);
-				/* sk_push() returns 0 on error.
-				   Let's addapt that */
-				if (ret <= 0) ret--;
-				}
-			else
-				free_string(s);
-			}
-		}
-	return ret;
-	}
-
-/* Returns the index to the place in the stack or -1 for error.  Uses a
-   direct reference to the prompt.  */
-int UI_add_input_string(UI *ui, const char *prompt, int flags,
-	char *result_buf, int minsize, int maxsize)
-	{
-	return general_allocate_string(ui, prompt, 0,
-		UIT_PROMPT, flags, result_buf, minsize, maxsize, NULL);
-	}
-
-/* Same as UI_add_input_string(), excepts it takes a copy of the prompt */
-int UI_dup_input_string(UI *ui, const char *prompt, int flags,
-	char *result_buf, int minsize, int maxsize)
-	{
-	char *prompt_copy=NULL;
-
-	if (prompt)
-		{
-		prompt_copy=BUF_strdup(prompt);
-		if (prompt_copy == NULL)
-			{
-			UIerr(UI_F_UI_DUP_INPUT_STRING,ERR_R_MALLOC_FAILURE);
-			return 0;
-			}
-		}
-	
-	return general_allocate_string(ui, prompt_copy, 1,
-		UIT_PROMPT, flags, result_buf, minsize, maxsize, NULL);
-	}
-
-int UI_add_verify_string(UI *ui, const char *prompt, int flags,
-	char *result_buf, int minsize, int maxsize, const char *test_buf)
-	{
-	return general_allocate_string(ui, prompt, 0,
-		UIT_VERIFY, flags, result_buf, minsize, maxsize, test_buf);
-	}
-
-int UI_dup_verify_string(UI *ui, const char *prompt, int flags,
-	char *result_buf, int minsize, int maxsize, const char *test_buf)
-	{
-	char *prompt_copy=NULL;
-
-	if (prompt)
-		{
-		prompt_copy=BUF_strdup(prompt);
-		if (prompt_copy == NULL)
-			{
-			UIerr(UI_F_UI_DUP_VERIFY_STRING,ERR_R_MALLOC_FAILURE);
-			return -1;
-			}
-		}
-	
-	return general_allocate_string(ui, prompt_copy, 1,
-		UIT_VERIFY, flags, result_buf, minsize, maxsize, test_buf);
-	}
-
-int UI_add_input_boolean(UI *ui, const char *prompt, const char *action_desc,
-	const char *ok_chars, const char *cancel_chars,
-	int flags, char *result_buf)
-	{
-	return general_allocate_boolean(ui, prompt, action_desc,
-		ok_chars, cancel_chars, 0, UIT_BOOLEAN, flags, result_buf);
-	}
-
-int UI_dup_input_boolean(UI *ui, const char *prompt, const char *action_desc,
-	const char *ok_chars, const char *cancel_chars,
-	int flags, char *result_buf)
-	{
-	char *prompt_copy = NULL;
-	char *action_desc_copy = NULL;
-	char *ok_chars_copy = NULL;
-	char *cancel_chars_copy = NULL;
-
-	if (prompt)
-		{
-		prompt_copy=BUF_strdup(prompt);
-		if (prompt_copy == NULL)
-			{
-			UIerr(UI_F_UI_DUP_INPUT_BOOLEAN,ERR_R_MALLOC_FAILURE);
-			goto err;
-			}
-		}
-	
-	if (action_desc)
-		{
-		action_desc_copy=BUF_strdup(action_desc);
-		if (action_desc_copy == NULL)
-			{
-			UIerr(UI_F_UI_DUP_INPUT_BOOLEAN,ERR_R_MALLOC_FAILURE);
-			goto err;
-			}
-		}
-	
-	if (ok_chars)
-		{
-		ok_chars_copy=BUF_strdup(ok_chars);
-		if (ok_chars_copy == NULL)
-			{
-			UIerr(UI_F_UI_DUP_INPUT_BOOLEAN,ERR_R_MALLOC_FAILURE);
-			goto err;
-			}
-		}
-	
-	if (cancel_chars)
-		{
-		cancel_chars_copy=BUF_strdup(cancel_chars);
-		if (cancel_chars_copy == NULL)
-			{
-			UIerr(UI_F_UI_DUP_INPUT_BOOLEAN,ERR_R_MALLOC_FAILURE);
-			goto err;
-			}
-		}
-	
-	return general_allocate_boolean(ui, prompt_copy, action_desc_copy,
-		ok_chars_copy, cancel_chars_copy, 1, UIT_BOOLEAN, flags,
-		result_buf);
- err:
-	if (prompt_copy) OPENSSL_free(prompt_copy);
-	if (action_desc_copy) OPENSSL_free(action_desc_copy);
-	if (ok_chars_copy) OPENSSL_free(ok_chars_copy);
-	if (cancel_chars_copy) OPENSSL_free(cancel_chars_copy);
-	return -1;
-	}
-
-int UI_add_info_string(UI *ui, const char *text)
-	{
-	return general_allocate_string(ui, text, 0, UIT_INFO, 0, NULL, 0, 0,
-		NULL);
-	}
-
-int UI_dup_info_string(UI *ui, const char *text)
-	{
-	char *text_copy=NULL;
-
-	if (text)
-		{
-		text_copy=BUF_strdup(text);
-		if (text_copy == NULL)
-			{
-			UIerr(UI_F_UI_DUP_INFO_STRING,ERR_R_MALLOC_FAILURE);
-			return -1;
-			}
-		}
-
-	return general_allocate_string(ui, text_copy, 1, UIT_INFO, 0, NULL,
-		0, 0, NULL);
-	}
-
-int UI_add_error_string(UI *ui, const char *text)
-	{
-	return general_allocate_string(ui, text, 0, UIT_ERROR, 0, NULL, 0, 0,
-		NULL);
-	}
-
-int UI_dup_error_string(UI *ui, const char *text)
-	{
-	char *text_copy=NULL;
-
-	if (text)
-		{
-		text_copy=BUF_strdup(text);
-		if (text_copy == NULL)
-			{
-			UIerr(UI_F_UI_DUP_ERROR_STRING,ERR_R_MALLOC_FAILURE);
-			return -1;
-			}
-		}
-	return general_allocate_string(ui, text_copy, 1, UIT_ERROR, 0, NULL,
-		0, 0, NULL);
-	}
-
-char *UI_construct_prompt(UI *ui, const char *object_desc,
-	const char *object_name)
-	{
-	char *prompt = NULL;
-
-	if (ui->meth->ui_construct_prompt)
-		prompt = ui->meth->ui_construct_prompt(ui,
-			object_desc, object_name);
-	else
-		{
-		char prompt1[] = "Enter ";
-		char prompt2[] = " for ";
-		char prompt3[] = ":";
-		int len = 0;
-
-		if (object_desc == NULL)
-			return NULL;
-		len = sizeof(prompt1) - 1 + strlen(object_desc);
-		if (object_name)
-			len += sizeof(prompt2) - 1 + strlen(object_name);
-		len += sizeof(prompt3) - 1;
-
-		prompt = (char *)OPENSSL_malloc(len + 1);
-		BUF_strlcpy(prompt, prompt1, len + 1);
-		BUF_strlcat(prompt, object_desc, len + 1);
-		if (object_name)
-			{
-			BUF_strlcat(prompt, prompt2, len + 1);
-			BUF_strlcat(prompt, object_name, len + 1);
-			}
-		BUF_strlcat(prompt, prompt3, len + 1);
-		}
-	return prompt;
-	}
-
-void *UI_add_user_data(UI *ui, void *user_data)
-	{
-	void *old_data = ui->user_data;
-	ui->user_data = user_data;
-	return old_data;
-	}
-
-void *UI_get0_user_data(UI *ui)
-	{
-	return ui->user_data;
-	}
-
-const char *UI_get0_result(UI *ui, int i)
-	{
-	if (i < 0)
-		{
-		UIerr(UI_F_UI_GET0_RESULT,UI_R_INDEX_TOO_SMALL);
-		return NULL;
-		}
-	if (i >= sk_UI_STRING_num(ui->strings))
-		{
-		UIerr(UI_F_UI_GET0_RESULT,UI_R_INDEX_TOO_LARGE);
-		return NULL;
-		}
-	return UI_get0_result_string(sk_UI_STRING_value(ui->strings, i));
-	}
-
-static int print_error(const char *str, size_t len, UI *ui)
-	{
-	UI_STRING uis;
-
-	memset(&uis, 0, sizeof(uis));
-	uis.type = UIT_ERROR;
-	uis.out_string = str;
-
-	if (ui->meth->ui_write_string
-		&& !ui->meth->ui_write_string(ui, &uis))
-		return -1;
-	return 0;
-	}
-
-int UI_process(UI *ui)
-	{
-	int i, ok=0;
-
-	if (ui->meth->ui_open_session && !ui->meth->ui_open_session(ui))
-		return -1;
-
-	if (ui->flags & UI_FLAG_PRINT_ERRORS)
-		ERR_print_errors_cb(
-			(int (*)(const char *, size_t, void *))print_error,
-			(void *)ui);
-
-	for(i=0; i<sk_UI_STRING_num(ui->strings); i++)
-		{
-		if (ui->meth->ui_write_string
-			&& !ui->meth->ui_write_string(ui,
-				sk_UI_STRING_value(ui->strings, i)))
-			{
-			ok=-1;
-			goto err;
-			}
-		}
-
-	if (ui->meth->ui_flush)
-		switch(ui->meth->ui_flush(ui))
-			{
-		case -1: /* Interrupt/Cancel/something... */
-			ok = -2;
-			goto err;
-		case 0: /* Errors */
-			ok = -1;
-			goto err;
-		default: /* Success */
-			ok = 0;
-			break;
-			}
-
-	for(i=0; i<sk_UI_STRING_num(ui->strings); i++)
-		{
-		if (ui->meth->ui_read_string)
-			{
-			switch(ui->meth->ui_read_string(ui,
-				sk_UI_STRING_value(ui->strings, i)))
-				{
-			case -1: /* Interrupt/Cancel/something... */
-				ok = -2;
-				goto err;
-			case 0: /* Errors */
-				ok = -1;
-				goto err;
-			default: /* Success */
-				ok = 0;
-				break;
-				}
-			}
-		}
- err:
-	if (ui->meth->ui_close_session && !ui->meth->ui_close_session(ui))
-		return -1;
-	return ok;
-	}
-
-int UI_ctrl(UI *ui, int cmd, long i, void *p, void (*f)(void))
-	{
-	if (ui == NULL)
-		{
-		UIerr(UI_F_UI_CTRL,ERR_R_PASSED_NULL_PARAMETER);
-		return -1;
-		}
-	switch(cmd)
-		{
-	case UI_CTRL_PRINT_ERRORS:
-		{
-		int save_flag = !!(ui->flags & UI_FLAG_PRINT_ERRORS);
-		if (i)
-			ui->flags |= UI_FLAG_PRINT_ERRORS;
-		else
-			ui->flags &= ~UI_FLAG_PRINT_ERRORS;
-		return save_flag;
-		}
-	case UI_CTRL_IS_REDOABLE:
-		return !!(ui->flags & UI_FLAG_REDOABLE);
-	default:
-		break;
-		}
-	UIerr(UI_F_UI_CTRL,UI_R_UNKNOWN_CONTROL_COMMAND);
-	return -1;
-	}
-
-int UI_get_ex_new_index(long argl, void *argp, CRYPTO_EX_new *new_func,
-	     CRYPTO_EX_dup *dup_func, CRYPTO_EX_free *free_func)
-        {
-	return CRYPTO_get_ex_new_index(CRYPTO_EX_INDEX_UI, argl, argp,
-				new_func, dup_func, free_func);
-        }
-
-int UI_set_ex_data(UI *r, int idx, void *arg)
-	{
-	return(CRYPTO_set_ex_data(&r->ex_data,idx,arg));
-	}
-
-void *UI_get_ex_data(UI *r, int idx)
-	{
-	return(CRYPTO_get_ex_data(&r->ex_data,idx));
-	}
-
-void UI_set_default_method(const UI_METHOD *meth)
-	{
-	default_UI_meth=meth;
-	}
-
-const UI_METHOD *UI_get_default_method(void)
-	{
-	if (default_UI_meth == NULL)
-		{
-		default_UI_meth=UI_OpenSSL();
-		}
-	return default_UI_meth;
-	}
-
-const UI_METHOD *UI_get_method(UI *ui)
-	{
-	return ui->meth;
-	}
-
-const UI_METHOD *UI_set_method(UI *ui, const UI_METHOD *meth)
-	{
-	ui->meth=meth;
-	return ui->meth;
-	}
-
-
-UI_METHOD *UI_create_method(char *name)
-	{
-	UI_METHOD *ui_method = (UI_METHOD *)OPENSSL_malloc(sizeof(UI_METHOD));
-
-	if (ui_method)
-		{
-		memset(ui_method, 0, sizeof(*ui_method));
-		ui_method->name = BUF_strdup(name);
-		}
-	return ui_method;
-	}
-
-/* BIG FSCKING WARNING!!!!  If you use this on a statically allocated method
-   (that is, it hasn't been allocated using UI_create_method(), you deserve
-   anything Murphy can throw at you and more!  You have been warned. */
-void UI_destroy_method(UI_METHOD *ui_method)
-	{
-	OPENSSL_free(ui_method->name);
-	ui_method->name = NULL;
-	OPENSSL_free(ui_method);
-	}
-
-int UI_method_set_opener(UI_METHOD *method, int (*opener)(UI *ui))
-	{
-	if (method)
-		{
-		method->ui_open_session = opener;
-		return 0;
-		}
-	else
-		return -1;
-	}
-
-int UI_method_set_writer(UI_METHOD *method, int (*writer)(UI *ui, UI_STRING *uis))
-	{
-	if (method)
-		{
-		method->ui_write_string = writer;
-		return 0;
-		}
-	else
-		return -1;
-	}
-
-int UI_method_set_flusher(UI_METHOD *method, int (*flusher)(UI *ui))
-	{
-	if (method)
-		{
-		method->ui_flush = flusher;
-		return 0;
-		}
-	else
-		return -1;
-	}
-
-int UI_method_set_reader(UI_METHOD *method, int (*reader)(UI *ui, UI_STRING *uis))
-	{
-	if (method)
-		{
-		method->ui_read_string = reader;
-		return 0;
-		}
-	else
-		return -1;
-	}
-
-int UI_method_set_closer(UI_METHOD *method, int (*closer)(UI *ui))
-	{
-	if (method)
-		{
-		method->ui_close_session = closer;
-		return 0;
-		}
-	else
-		return -1;
-	}
-
-int (*UI_method_get_opener(UI_METHOD *method))(UI*)
-	{
-	if (method)
-		return method->ui_open_session;
-	else
-		return NULL;
-	}
-
-int (*UI_method_get_writer(UI_METHOD *method))(UI*,UI_STRING*)
-	{
-	if (method)
-		return method->ui_write_string;
-	else
-		return NULL;
-	}
-
-int (*UI_method_get_flusher(UI_METHOD *method))(UI*)
-	{
-	if (method)
-		return method->ui_flush;
-	else
-		return NULL;
-	}
-
-int (*UI_method_get_reader(UI_METHOD *method))(UI*,UI_STRING*)
-	{
-	if (method)
-		return method->ui_read_string;
-	else
-		return NULL;
-	}
-
-int (*UI_method_get_closer(UI_METHOD *method))(UI*)
-	{
-	if (method)
-		return method->ui_close_session;
-	else
-		return NULL;
-	}
-
-enum UI_string_types UI_get_string_type(UI_STRING *uis)
-	{
-	if (!uis)
-		return UIT_NONE;
-	return uis->type;
-	}
-
-int UI_get_input_flags(UI_STRING *uis)
-	{
-	if (!uis)
-		return 0;
-	return uis->input_flags;
-	}
-
-const char *UI_get0_output_string(UI_STRING *uis)
-	{
-	if (!uis)
-		return NULL;
-	return uis->out_string;
-	}
-
-const char *UI_get0_action_string(UI_STRING *uis)
-	{
-	if (!uis)
-		return NULL;
-	switch(uis->type)
-		{
-	case UIT_PROMPT:
-	case UIT_BOOLEAN:
-		return uis->_.boolean_data.action_desc;
-	default:
-		return NULL;
-		}
-	}
-
-const char *UI_get0_result_string(UI_STRING *uis)
-	{
-	if (!uis)
-		return NULL;
-	switch(uis->type)
-		{
-	case UIT_PROMPT:
-	case UIT_VERIFY:
-		return uis->result_buf;
-	default:
-		return NULL;
-		}
-	}
-
-const char *UI_get0_test_string(UI_STRING *uis)
-	{
-	if (!uis)
-		return NULL;
-	switch(uis->type)
-		{
-	case UIT_VERIFY:
-		return uis->_.string_data.test_buf;
-	default:
-		return NULL;
-		}
-	}
-
-int UI_get_result_minsize(UI_STRING *uis)
-	{
-	if (!uis)
-		return -1;
-	switch(uis->type)
-		{
-	case UIT_PROMPT:
-	case UIT_VERIFY:
-		return uis->_.string_data.result_minsize;
-	default:
-		return -1;
-		}
-	}
-
-int UI_get_result_maxsize(UI_STRING *uis)
-	{
-	if (!uis)
-		return -1;
-	switch(uis->type)
-		{
-	case UIT_PROMPT:
-	case UIT_VERIFY:
-		return uis->_.string_data.result_maxsize;
-	default:
-		return -1;
-		}
-	}
-
-int UI_set_result(UI *ui, UI_STRING *uis, const char *result)
-	{
-	int l = strlen(result);
-
-	ui->flags &= ~UI_FLAG_REDOABLE;
-
-	if (!uis)
-		return -1;
-	switch (uis->type)
-		{
-	case UIT_PROMPT:
-	case UIT_VERIFY:
-		{
-		char number1[DECIMAL_SIZE(uis->_.string_data.result_minsize)+1];
-		char number2[DECIMAL_SIZE(uis->_.string_data.result_maxsize)+1];
-
-		BIO_snprintf(number1, sizeof(number1), "%d",
-			uis->_.string_data.result_minsize);
-		BIO_snprintf(number2, sizeof(number2), "%d",
-			uis->_.string_data.result_maxsize);
-
-		if (l < uis->_.string_data.result_minsize)
-			{
-			ui->flags |= UI_FLAG_REDOABLE;
-			UIerr(UI_F_UI_SET_RESULT,UI_R_RESULT_TOO_SMALL);
-			ERR_add_error_data(5,"You must type in ",
-				number1," to ",number2," characters");
-			return -1;
-			}
-		if (l > uis->_.string_data.result_maxsize)
-			{
-			ui->flags |= UI_FLAG_REDOABLE;
-			UIerr(UI_F_UI_SET_RESULT,UI_R_RESULT_TOO_LARGE);
-			ERR_add_error_data(5,"You must type in ",
-				number1," to ",number2," characters");
-			return -1;
-			}
-		}
-
-		if (!uis->result_buf)
-			{
-			UIerr(UI_F_UI_SET_RESULT,UI_R_NO_RESULT_BUFFER);
-			return -1;
-			}
-
-		BUF_strlcpy(uis->result_buf, result,
-			    uis->_.string_data.result_maxsize + 1);
-		break;
-	case UIT_BOOLEAN:
-		{
-		const char *p;
-
-		if (!uis->result_buf)
-			{
-			UIerr(UI_F_UI_SET_RESULT,UI_R_NO_RESULT_BUFFER);
-			return -1;
-			}
-
-		uis->result_buf[0] = '\0';
-		for(p = result; *p; p++)
-			{
-			if (strchr(uis->_.boolean_data.ok_chars, *p))
-				{
-				uis->result_buf[0] =
-					uis->_.boolean_data.ok_chars[0];
-				break;
-				}
-			if (strchr(uis->_.boolean_data.cancel_chars, *p))
-				{
-				uis->result_buf[0] =
-					uis->_.boolean_data.cancel_chars[0];
-				break;
-				}
-			}
-	default:
-		break;
-		}
-		}
-	return 0;
-	}
diff --git a/crypto/openssl/crypto/ui/ui_locl.h b/crypto/openssl/crypto/ui/ui_locl.h
deleted file mode 100644
index aa4a55637d9f..000000000000
--- a/crypto/openssl/crypto/ui/ui_locl.h
+++ /dev/null
@@ -1,153 +0,0 @@
-/* crypto/ui/ui.h -*- mode:C; c-file-style: "eay" -*- */
-/* Written by Richard Levitte (richard@levitte.org) for the OpenSSL
- * project 2001.
- */
-/* ====================================================================
- * Copyright (c) 2001 The OpenSSL Project.  All rights reserved.
- *
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions
- * are met:
- *
- * 1. Redistributions of source code must retain the above copyright
- *    notice, this list of conditions and the following disclaimer. 
- *
- * 2. Redistributions in binary form must reproduce the above copyright
- *    notice, this list of conditions and the following disclaimer in
- *    the documentation and/or other materials provided with the
- *    distribution.
- *
- * 3. All advertising materials mentioning features or use of this
- *    software must display the following acknowledgment:
- *    "This product includes software developed by the OpenSSL Project
- *    for use in the OpenSSL Toolkit. (http://www.openssl.org/)"
- *
- * 4. The names "OpenSSL Toolkit" and "OpenSSL Project" must not be used to
- *    endorse or promote products derived from this software without
- *    prior written permission. For written permission, please contact
- *    openssl-core@openssl.org.
- *
- * 5. Products derived from this software may not be called "OpenSSL"
- *    nor may "OpenSSL" appear in their names without prior written
- *    permission of the OpenSSL Project.
- *
- * 6. Redistributions of any form whatsoever must retain the following
- *    acknowledgment:
- *    "This product includes software developed by the OpenSSL Project
- *    for use in the OpenSSL Toolkit (http://www.openssl.org/)"
- *
- * THIS SOFTWARE IS PROVIDED BY THE OpenSSL PROJECT ``AS IS'' AND ANY
- * EXPRESSED OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
- * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR
- * PURPOSE ARE DISCLAIMED.  IN NO EVENT SHALL THE OpenSSL PROJECT OR
- * ITS CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
- * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
- * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
- * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
- * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
- * STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
- * ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED
- * OF THE POSSIBILITY OF SUCH DAMAGE.
- * ====================================================================
- *
- * This product includes cryptographic software written by Eric Young
- * (eay@cryptsoft.com).  This product includes software written by Tim
- * Hudson (tjh@cryptsoft.com).
- *
- */
-
-#ifndef HEADER_UI_LOCL_H
-#define HEADER_UI_LOCL_H
-
-#include <openssl/ui.h>
-#include <openssl/crypto.h>
-
-#ifdef _
-#undef _
-#endif
-
-struct ui_method_st
-	{
-	char *name;
-
-	/* All the functions return 1 or non-NULL for success and 0 or NULL
-	   for failure */
-
-	/* Open whatever channel for this, be it the console, an X window
-	   or whatever.
-	   This function should use the ex_data structure to save
-	   intermediate data. */
-	int (*ui_open_session)(UI *ui);
-
-	int (*ui_write_string)(UI *ui, UI_STRING *uis);
-
-	/* Flush the output.  If a GUI dialog box is used, this function can
-	   be used to actually display it. */
-	int (*ui_flush)(UI *ui);
-
-	int (*ui_read_string)(UI *ui, UI_STRING *uis);
-
-	int (*ui_close_session)(UI *ui);
-
-	/* Construct a prompt in a user-defined manner.  object_desc is a
-	   textual short description of the object, for example "pass phrase",
-	   and object_name is the name of the object (might be a card name or
-	   a file name.
-	   The returned string shall always be allocated on the heap with
-	   OPENSSL_malloc(), and need to be free'd with OPENSSL_free(). */
-	char *(*ui_construct_prompt)(UI *ui, const char *object_desc,
-		const char *object_name);
-	};
-
-struct ui_string_st
-	{
-	enum UI_string_types type; /* Input */
-	const char *out_string;	/* Input */
-	int input_flags;	/* Flags from the user */
-
-	/* The following parameters are completely irrelevant for UIT_INFO,
-	   and can therefore be set to 0 or NULL */
-	char *result_buf;	/* Input and Output: If not NULL, user-defined
-				   with size in result_maxsize.  Otherwise, it
-				   may be allocated by the UI routine, meaning
-				   result_minsize is going to be overwritten.*/
-	union
-		{
-		struct
-			{
-			int result_minsize;	/* Input: minimum required
-						   size of the result.
-						*/
-			int result_maxsize;	/* Input: maximum permitted
-						   size of the result */
-
-			const char *test_buf;	/* Input: test string to verify
-						   against */
-			} string_data;
-		struct
-			{
-			const char *action_desc; /* Input */
-			const char *ok_chars; /* Input */
-			const char *cancel_chars; /* Input */
-			} boolean_data;
-		} _;
-
-#define OUT_STRING_FREEABLE 0x01
-	int flags;		/* flags for internal use */
-	};
-
-struct ui_st
-	{
-	const UI_METHOD *meth;
-	STACK_OF(UI_STRING) *strings; /* We might want to prompt for more
-					 than one thing at a time, and
-					 with different echoing status.  */
-	void *user_data;
-	CRYPTO_EX_DATA ex_data;
-
-#define UI_FLAG_REDOABLE	0x0001
-#define UI_FLAG_PRINT_ERRORS	0x0100
-	int flags;
-	};
-
-#endif
diff --git a/crypto/openssl/crypto/ui/ui_openssl.c b/crypto/openssl/crypto/ui/ui_openssl.c
deleted file mode 100644
index 1f23a45a339b..000000000000
--- a/crypto/openssl/crypto/ui/ui_openssl.c
+++ /dev/null
@@ -1,705 +0,0 @@
-/* crypto/ui/ui_openssl.c -*- mode:C; c-file-style: "eay" -*- */
-/* Written by Richard Levitte (richard@levitte.org) and others
- * for the OpenSSL project 2001.
- */
-/* ====================================================================
- * Copyright (c) 2001 The OpenSSL Project.  All rights reserved.
- *
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions
- * are met:
- *
- * 1. Redistributions of source code must retain the above copyright
- *    notice, this list of conditions and the following disclaimer. 
- *
- * 2. Redistributions in binary form must reproduce the above copyright
- *    notice, this list of conditions and the following disclaimer in
- *    the documentation and/or other materials provided with the
- *    distribution.
- *
- * 3. All advertising materials mentioning features or use of this
- *    software must display the following acknowledgment:
- *    "This product includes software developed by the OpenSSL Project
- *    for use in the OpenSSL Toolkit. (http://www.openssl.org/)"
- *
- * 4. The names "OpenSSL Toolkit" and "OpenSSL Project" must not be used to
- *    endorse or promote products derived from this software without
- *    prior written permission. For written permission, please contact
- *    openssl-core@openssl.org.
- *
- * 5. Products derived from this software may not be called "OpenSSL"
- *    nor may "OpenSSL" appear in their names without prior written
- *    permission of the OpenSSL Project.
- *
- * 6. Redistributions of any form whatsoever must retain the following
- *    acknowledgment:
- *    "This product includes software developed by the OpenSSL Project
- *    for use in the OpenSSL Toolkit (http://www.openssl.org/)"
- *
- * THIS SOFTWARE IS PROVIDED BY THE OpenSSL PROJECT ``AS IS'' AND ANY
- * EXPRESSED OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
- * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR
- * PURPOSE ARE DISCLAIMED.  IN NO EVENT SHALL THE OpenSSL PROJECT OR
- * ITS CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
- * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
- * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
- * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
- * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
- * STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
- * ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED
- * OF THE POSSIBILITY OF SUCH DAMAGE.
- * ====================================================================
- *
- * This product includes cryptographic software written by Eric Young
- * (eay@cryptsoft.com).  This product includes software written by Tim
- * Hudson (tjh@cryptsoft.com).
- *
- */
-
-/* The lowest level part of this file was previously in crypto/des/read_pwd.c,
- * Copyright (C) 1995-1998 Eric Young (eay@cryptsoft.com)
- * All rights reserved.
- *
- * This package is an SSL implementation written
- * by Eric Young (eay@cryptsoft.com).
- * The implementation was written so as to conform with Netscapes SSL.
- * 
- * This library is free for commercial and non-commercial use as long as
- * the following conditions are aheared to.  The following conditions
- * apply to all code found in this distribution, be it the RC4, RSA,
- * lhash, DES, etc., code; not just the SSL code.  The SSL documentation
- * included with this distribution is covered by the same copyright terms
- * except that the holder is Tim Hudson (tjh@cryptsoft.com).
- * 
- * Copyright remains Eric Young's, and as such any Copyright notices in
- * the code are not to be removed.
- * If this package is used in a product, Eric Young should be given attribution
- * as the author of the parts of the library used.
- * This can be in the form of a textual message at program startup or
- * in documentation (online or textual) provided with the package.
- * 
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions
- * are met:
- * 1. Redistributions of source code must retain the copyright
- *    notice, this list of conditions and the following disclaimer.
- * 2. Redistributions in binary form must reproduce the above copyright
- *    notice, this list of conditions and the following disclaimer in the
- *    documentation and/or other materials provided with the distribution.
- * 3. All advertising materials mentioning features or use of this software
- *    must display the following acknowledgement:
- *    "This product includes cryptographic software written by
- *     Eric Young (eay@cryptsoft.com)"
- *    The word 'cryptographic' can be left out if the rouines from the library
- *    being used are not cryptographic related :-).
- * 4. If you include any Windows specific code (or a derivative thereof) from 
- *    the apps directory (application code) you must include an acknowledgement:
- *    "This product includes software written by Tim Hudson (tjh@cryptsoft.com)"
- * 
- * THIS SOFTWARE IS PROVIDED BY ERIC YOUNG ``AS IS'' AND
- * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
- * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
- * ARE DISCLAIMED.  IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE
- * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
- * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
- * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
- * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
- * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
- * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
- * SUCH DAMAGE.
- * 
- * The licence and distribution terms for any publically available version or
- * derivative of this code cannot be changed.  i.e. this code cannot simply be
- * copied and put under another distribution licence
- * [including the GNU Public Licence.]
- */
-
-
-#include <openssl/e_os2.h>
-
-/* need for #define _POSIX_C_SOURCE arises whenever you pass -ansi to gcc
- * [maybe others?], because it masks interfaces not discussed in standard,
- * sigaction and fileno included. -pedantic would be more appropriate for
- * the intended purposes, but we can't prevent users from adding -ansi.
- */
-#define _POSIX_C_SOURCE 1
-#include <signal.h>
-#include <stdio.h>
-#include <string.h>
-#include <errno.h>
-
-#if !defined(OPENSSL_SYS_MSDOS) && !defined(OPENSSL_SYS_VMS)
-# ifdef OPENSSL_UNISTD
-#  include OPENSSL_UNISTD
-# else
-#  include <unistd.h>
-# endif
-/* If unistd.h defines _POSIX_VERSION, we conclude that we
- * are on a POSIX system and have sigaction and termios. */
-# if defined(_POSIX_VERSION)
-
-#  define SIGACTION
-#  if !defined(TERMIOS) && !defined(TERMIO) && !defined(SGTTY)
-#   define TERMIOS
-#  endif
-
-# endif
-#endif
-
-#ifdef WIN16TTY
-# undef OPENSSL_SYS_WIN16
-# undef WIN16
-# undef _WINDOWS
-# include <graph.h>
-#endif
-
-/* 06-Apr-92 Luke Brennan    Support for VMS */
-#include "ui_locl.h"
-#include "cryptlib.h"
-
-#ifdef OPENSSL_SYS_VMS		/* prototypes for sys$whatever */
-# include <starlet.h>
-# ifdef __DECC
-#  pragma message disable DOLLARID
-# endif
-#endif
-
-#ifdef WIN_CONSOLE_BUG
-# include <windows.h>
-#ifndef OPENSSL_SYS_WINCE
-# include <wincon.h>
-#endif
-#endif
-
-
-/* There are 5 types of terminal interface supported,
- * TERMIO, TERMIOS, VMS, MSDOS and SGTTY
- */
-
-#if defined(__sgi) && !defined(TERMIOS)
-# define TERMIOS
-# undef  TERMIO
-# undef  SGTTY
-#endif
-
-#if defined(linux) && !defined(TERMIO)
-# undef  TERMIOS
-# define TERMIO
-# undef  SGTTY
-#endif
-
-#ifdef _LIBC
-# undef  TERMIOS
-# define TERMIO
-# undef  SGTTY
-#endif
-
-#if !defined(TERMIO) && !defined(TERMIOS) && !defined(OPENSSL_SYS_VMS) && !defined(OPENSSL_SYS_MSDOS) && !defined(OPENSSL_SYS_MACINTOSH_CLASSIC) && !defined(MAC_OS_GUSI_SOURCE)
-# undef  TERMIOS
-# undef  TERMIO
-# define SGTTY
-#endif
-
-#if defined(OPENSSL_SYS_VXWORKS)
-#undef TERMIOS
-#undef TERMIO
-#undef SGTTY
-#endif
-
-#if defined(OPENSSL_SYS_NETWARE)
-#undef TERMIOS
-#undef TERMIO
-#undef SGTTY
-#endif
-
-#ifdef TERMIOS
-# include <termios.h>
-# define TTY_STRUCT		struct termios
-# define TTY_FLAGS		c_lflag
-# define TTY_get(tty,data)	tcgetattr(tty,data)
-# define TTY_set(tty,data)	tcsetattr(tty,TCSANOW,data)
-#endif
-
-#ifdef TERMIO
-# include <termio.h>
-# define TTY_STRUCT		struct termio
-# define TTY_FLAGS		c_lflag
-# define TTY_get(tty,data)	ioctl(tty,TCGETA,data)
-# define TTY_set(tty,data)	ioctl(tty,TCSETA,data)
-#endif
-
-#ifdef SGTTY
-# include <sgtty.h>
-# define TTY_STRUCT		struct sgttyb
-# define TTY_FLAGS		sg_flags
-# define TTY_get(tty,data)	ioctl(tty,TIOCGETP,data)
-# define TTY_set(tty,data)	ioctl(tty,TIOCSETP,data)
-#endif
-
-#if !defined(_LIBC) && !defined(OPENSSL_SYS_MSDOS) && !defined(OPENSSL_SYS_VMS) && !defined(OPENSSL_SYS_MACINTOSH_CLASSIC) && !defined(OPENSSL_SYS_SUNOS)
-# include <sys/ioctl.h>
-#endif
-
-#ifdef OPENSSL_SYS_MSDOS
-# include <conio.h>
-#endif
-
-#ifdef OPENSSL_SYS_VMS
-# include <ssdef.h>
-# include <iodef.h>
-# include <ttdef.h>
-# include <descrip.h>
-struct IOSB {
-	short iosb$w_value;
-	short iosb$w_count;
-	long  iosb$l_info;
-	};
-#endif
-
-#ifdef OPENSSL_SYS_SUNOS
-	typedef int sig_atomic_t;
-#endif
-
-#if defined(OPENSSL_SYS_MACINTOSH_CLASSIC) || defined(MAC_OS_GUSI_SOURCE) || defined(OPENSSL_SYS_NETWARE)
-/*
- * This one needs work. As a matter of fact the code is unoperational
- * and this is only a trick to get it compiled.
- *					<appro@fy.chalmers.se>
- */
-# define TTY_STRUCT int
-#endif
-
-#ifndef NX509_SIG
-# define NX509_SIG 32
-#endif
-
-
-/* Define globals.  They are protected by a lock */
-#ifdef SIGACTION
-static struct sigaction savsig[NX509_SIG];
-#else
-static void (*savsig[NX509_SIG])(int );
-#endif
-
-#ifdef OPENSSL_SYS_VMS
-static struct IOSB iosb;
-static $DESCRIPTOR(terminal,"TT");
-static long tty_orig[3], tty_new[3]; /* XXX   Is there any guarantee that this will always suffice for the actual structures? */
-static long status;
-static unsigned short channel = 0;
-#else
-#if !defined(OPENSSL_SYS_MSDOS) || defined(__DJGPP__)
-static TTY_STRUCT tty_orig,tty_new;
-#endif
-#endif
-static FILE *tty_in, *tty_out;
-static int is_a_tty;
-
-/* Declare static functions */
-#if !defined(OPENSSL_SYS_WIN16) && !defined(OPENSSL_SYS_WINCE)
-static void read_till_nl(FILE *);
-static void recsig(int);
-static void pushsig(void);
-static void popsig(void);
-#endif
-#if defined(OPENSSL_SYS_MSDOS) && !defined(OPENSSL_SYS_WIN16)
-static int noecho_fgets(char *buf, int size, FILE *tty);
-#endif
-static int read_string_inner(UI *ui, UI_STRING *uis, int echo, int strip_nl);
-
-static int read_string(UI *ui, UI_STRING *uis);
-static int write_string(UI *ui, UI_STRING *uis);
-
-static int open_console(UI *ui);
-static int echo_console(UI *ui);
-static int noecho_console(UI *ui);
-static int close_console(UI *ui);
-
-static UI_METHOD ui_openssl =
-	{
-	"OpenSSL default user interface",
-	open_console,
-	write_string,
-	NULL,			/* No flusher is needed for command lines */
-	read_string,
-	close_console,
-	NULL
-	};
-
-/* The method with all the built-in thingies */
-UI_METHOD *UI_OpenSSL(void)
-	{
-	return &ui_openssl;
-	}
-
-/* The following function makes sure that info and error strings are printed
-   before any prompt. */
-static int write_string(UI *ui, UI_STRING *uis)
-	{
-	switch (UI_get_string_type(uis))
-		{
-	case UIT_ERROR:
-	case UIT_INFO:
-		fputs(UI_get0_output_string(uis), tty_out);
-		fflush(tty_out);
-		break;
-	default:
-		break;
-		}
-	return 1;
-	}
-
-static int read_string(UI *ui, UI_STRING *uis)
-	{
-	int ok = 0;
-
-	switch (UI_get_string_type(uis))
-		{
-	case UIT_BOOLEAN:
-		fputs(UI_get0_output_string(uis), tty_out);
-		fputs(UI_get0_action_string(uis), tty_out);
-		fflush(tty_out);
-		return read_string_inner(ui, uis,
-			UI_get_input_flags(uis) & UI_INPUT_FLAG_ECHO, 0);
-	case UIT_PROMPT:
-		fputs(UI_get0_output_string(uis), tty_out);
-		fflush(tty_out);
-		return read_string_inner(ui, uis,
-			UI_get_input_flags(uis) & UI_INPUT_FLAG_ECHO, 1);
-	case UIT_VERIFY:
-		fprintf(tty_out,"Verifying - %s",
-			UI_get0_output_string(uis));
-		fflush(tty_out);
-		if ((ok = read_string_inner(ui, uis,
-			UI_get_input_flags(uis) & UI_INPUT_FLAG_ECHO, 1)) <= 0)
-			return ok;
-		if (strcmp(UI_get0_result_string(uis),
-			UI_get0_test_string(uis)) != 0)
-			{
-			fprintf(tty_out,"Verify failure\n");
-			fflush(tty_out);
-			return 0;
-			}
-		break;
-	default:
-		break;
-		}
-	return 1;
-	}
-
-
-#if !defined(OPENSSL_SYS_WIN16) && !defined(OPENSSL_SYS_WINCE)
-/* Internal functions to read a string without echoing */
-static void read_till_nl(FILE *in)
-	{
-#define SIZE 4
-	char buf[SIZE+1];
-
-	do	{
-		fgets(buf,SIZE,in);
-		} while (strchr(buf,'\n') == NULL);
-	}
-
-static volatile sig_atomic_t intr_signal;
-#endif
-
-static int read_string_inner(UI *ui, UI_STRING *uis, int echo, int strip_nl)
-	{
-	static int ps;
-	int ok;
-	char result[BUFSIZ];
-	int maxsize = BUFSIZ-1;
-#if !defined(OPENSSL_SYS_WIN16) && !defined(OPENSSL_SYS_WINCE)
-	char *p;
-
-	intr_signal=0;
-	ok=0;
-	ps=0;
-
-	pushsig();
-	ps=1;
-
-	if (!echo && !noecho_console(ui))
-		goto error;
-	ps=2;
-
-	result[0]='\0';
-#ifdef OPENSSL_SYS_MSDOS
-	if (!echo)
-		{
-		noecho_fgets(result,maxsize,tty_in);
-		p=result; /* FIXME: noecho_fgets doesn't return errors */
-		}
-	else
-		p=fgets(result,maxsize,tty_in);
-#else
-	p=fgets(result,maxsize,tty_in);
-#endif
-	if(!p)
-		goto error;
-	if (feof(tty_in)) goto error;
-	if (ferror(tty_in)) goto error;
-	if ((p=(char *)strchr(result,'\n')) != NULL)
-		{
-		if (strip_nl)
-			*p='\0';
-		}
-	else
-		read_till_nl(tty_in);
-	if (UI_set_result(ui, uis, result) >= 0)
-		ok=1;
-
-error:
-	if (intr_signal == SIGINT)
-		ok=-1;
-	if (!echo) fprintf(tty_out,"\n");
-	if (ps >= 2 && !echo && !echo_console(ui))
-		ok=0;
-
-	if (ps >= 1)
-		popsig();
-#else
-	ok=1;
-#endif
-
-	OPENSSL_cleanse(result,BUFSIZ);
-	return ok;
-	}
-
-
-/* Internal functions to open, handle and close a channel to the console.  */
-static int open_console(UI *ui)
-	{
-	CRYPTO_w_lock(CRYPTO_LOCK_UI);
-	is_a_tty = 1;
-
-#if defined(OPENSSL_SYS_MACINTOSH_CLASSIC) || defined(OPENSSL_SYS_VXWORKS) || defined(OPENSSL_SYS_NETWARE)
-	tty_in=stdin;
-	tty_out=stderr;
-#else
-#  ifdef OPENSSL_SYS_MSDOS
-#    define DEV_TTY "con"
-#  else
-#    define DEV_TTY "/dev/tty"
-#  endif
-	if ((tty_in=fopen(DEV_TTY,"r")) == NULL)
-		tty_in=stdin;
-	if ((tty_out=fopen(DEV_TTY,"w")) == NULL)
-		tty_out=stderr;
-#endif
-
-#if defined(TTY_get) && !defined(OPENSSL_SYS_VMS)
- 	if (TTY_get(fileno(tty_in),&tty_orig) == -1)
-		{
-#ifdef ENOTTY
-		if (errno == ENOTTY)
-			is_a_tty=0;
-		else
-#endif
-#ifdef EINVAL
-		/* Ariel Glenn ariel@columbia.edu reports that solaris
-		 * can return EINVAL instead.  This should be ok */
-		if (errno == EINVAL)
-			is_a_tty=0;
-		else
-#endif
-			return 0;
-		}
-#endif
-#ifdef OPENSSL_SYS_VMS
-	status = sys$assign(&terminal,&channel,0,0);
-	if (status != SS$_NORMAL)
-		return 0;
-	status=sys$qiow(0,channel,IO$_SENSEMODE,&iosb,0,0,tty_orig,12,0,0,0,0);
-	if ((status != SS$_NORMAL) || (iosb.iosb$w_value != SS$_NORMAL))
-		return 0;
-#endif
-	return 1;
-	}
-
-static int noecho_console(UI *ui)
-	{
-#ifdef TTY_FLAGS
-	memcpy(&(tty_new),&(tty_orig),sizeof(tty_orig));
-	tty_new.TTY_FLAGS &= ~ECHO;
-#endif
-
-#if defined(TTY_set) && !defined(OPENSSL_SYS_VMS)
-	if (is_a_tty && (TTY_set(fileno(tty_in),&tty_new) == -1))
-		return 0;
-#endif
-#ifdef OPENSSL_SYS_VMS
-	tty_new[0] = tty_orig[0];
-	tty_new[1] = tty_orig[1] | TT$M_NOECHO;
-	tty_new[2] = tty_orig[2];
-	status = sys$qiow(0,channel,IO$_SETMODE,&iosb,0,0,tty_new,12,0,0,0,0);
-	if ((status != SS$_NORMAL) || (iosb.iosb$w_value != SS$_NORMAL))
-		return 0;
-#endif
-	return 1;
-	}
-
-static int echo_console(UI *ui)
-	{
-#if defined(TTY_set) && !defined(OPENSSL_SYS_VMS)
-	memcpy(&(tty_new),&(tty_orig),sizeof(tty_orig));
-	tty_new.TTY_FLAGS |= ECHO;
-#endif
-
-#if defined(TTY_set) && !defined(OPENSSL_SYS_VMS)
-	if (is_a_tty && (TTY_set(fileno(tty_in),&tty_new) == -1))
-		return 0;
-#endif
-#ifdef OPENSSL_SYS_VMS
-	tty_new[0] = tty_orig[0];
-	tty_new[1] = tty_orig[1] & ~TT$M_NOECHO;
-	tty_new[2] = tty_orig[2];
-	status = sys$qiow(0,channel,IO$_SETMODE,&iosb,0,0,tty_new,12,0,0,0,0);
-	if ((status != SS$_NORMAL) || (iosb.iosb$w_value != SS$_NORMAL))
-		return 0;
-#endif
-	return 1;
-	}
-
-static int close_console(UI *ui)
-	{
-	if (tty_in != stdin) fclose(tty_in);
-	if (tty_out != stderr) fclose(tty_out);
-#ifdef OPENSSL_SYS_VMS
-	status = sys$dassgn(channel);
-#endif
-	CRYPTO_w_unlock(CRYPTO_LOCK_UI);
-
-	return 1;
-	}
-
-
-#if !defined(OPENSSL_SYS_WIN16) && !defined(OPENSSL_SYS_WINCE)
-/* Internal functions to handle signals and act on them */
-static void pushsig(void)
-	{
-#ifndef OPENSSL_SYS_WIN32
-	int i;
-#endif
-#ifdef SIGACTION
-	struct sigaction sa;
-
-	memset(&sa,0,sizeof sa);
-	sa.sa_handler=recsig;
-#endif
-
-#ifdef OPENSSL_SYS_WIN32
-	savsig[SIGABRT]=signal(SIGABRT,recsig);
-	savsig[SIGFPE]=signal(SIGFPE,recsig);
-	savsig[SIGILL]=signal(SIGILL,recsig);
-	savsig[SIGINT]=signal(SIGINT,recsig);
-	savsig[SIGSEGV]=signal(SIGSEGV,recsig);
-	savsig[SIGTERM]=signal(SIGTERM,recsig);
-#else
-	for (i=1; i<NX509_SIG; i++)
-		{
-#ifdef SIGUSR1
-		if (i == SIGUSR1)
-			continue;
-#endif
-#ifdef SIGUSR2
-		if (i == SIGUSR2)
-			continue;
-#endif
-#ifdef SIGKILL
-		if (i == SIGKILL) /* We can't make any action on that. */
-			continue;
-#endif
-#ifdef SIGACTION
-		sigaction(i,&sa,&savsig[i]);
-#else
-		savsig[i]=signal(i,recsig);
-#endif
-		}
-#endif
-
-#ifdef SIGWINCH
-	signal(SIGWINCH,SIG_DFL);
-#endif
-	}
-
-static void popsig(void)
-	{
-#ifdef OPENSSL_SYS_WIN32
-	signal(SIGABRT,savsig[SIGABRT]);
-	signal(SIGFPE,savsig[SIGFPE]);
-	signal(SIGILL,savsig[SIGILL]);
-	signal(SIGINT,savsig[SIGINT]);
-	signal(SIGSEGV,savsig[SIGSEGV]);
-	signal(SIGTERM,savsig[SIGTERM]);
-#else
-	int i;
-	for (i=1; i<NX509_SIG; i++)
-		{
-#ifdef SIGUSR1
-		if (i == SIGUSR1)
-			continue;
-#endif
-#ifdef SIGUSR2
-		if (i == SIGUSR2)
-			continue;
-#endif
-#ifdef SIGACTION
-		sigaction(i,&savsig[i],NULL);
-#else
-		signal(i,savsig[i]);
-#endif
-		}
-#endif
-	}
-
-static void recsig(int i)
-	{
-	intr_signal=i;
-	}
-#endif
-
-/* Internal functions specific for Windows */
-#if defined(OPENSSL_SYS_MSDOS) && !defined(OPENSSL_SYS_WIN16) && !defined(OPENSSL_SYS_WINCE)
-static int noecho_fgets(char *buf, int size, FILE *tty)
-	{
-	int i;
-	char *p;
-
-	p=buf;
-	for (;;)
-		{
-		if (size == 0)
-			{
-			*p='\0';
-			break;
-			}
-		size--;
-#ifdef WIN16TTY
-		i=_inchar();
-#else
-		i=getch();
-#endif
-		if (i == '\r') i='\n';
-		*(p++)=i;
-		if (i == '\n')
-			{
-			*p='\0';
-			break;
-			}
-		}
-#ifdef WIN_CONSOLE_BUG
-/* Win95 has several evil console bugs: one of these is that the
- * last character read using getch() is passed to the next read: this is
- * usually a CR so this can be trouble. No STDIO fix seems to work but
- * flushing the console appears to do the trick.
- */
-		{
-			HANDLE inh;
-			inh = GetStdHandle(STD_INPUT_HANDLE);
-			FlushConsoleInputBuffer(inh);
-		}
-#endif
-	return(strlen(buf));
-	}
-#endif
diff --git a/crypto/openssl/crypto/ui/ui_util.c b/crypto/openssl/crypto/ui/ui_util.c
deleted file mode 100644
index 5d9760bb7b3f..000000000000
--- a/crypto/openssl/crypto/ui/ui_util.c
+++ /dev/null
@@ -1,91 +0,0 @@
-/* crypto/ui/ui_util.c -*- mode:C; c-file-style: "eay" -*- */
-/* ====================================================================
- * Copyright (c) 2001-2002 The OpenSSL Project.  All rights reserved.
- *
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions
- * are met:
- *
- * 1. Redistributions of source code must retain the above copyright
- *    notice, this list of conditions and the following disclaimer. 
- *
- * 2. Redistributions in binary form must reproduce the above copyright
- *    notice, this list of conditions and the following disclaimer in
- *    the documentation and/or other materials provided with the
- *    distribution.
- *
- * 3. All advertising materials mentioning features or use of this
- *    software must display the following acknowledgment:
- *    "This product includes software developed by the OpenSSL Project
- *    for use in the OpenSSL Toolkit. (http://www.openssl.org/)"
- *
- * 4. The names "OpenSSL Toolkit" and "OpenSSL Project" must not be used to
- *    endorse or promote products derived from this software without
- *    prior written permission. For written permission, please contact
- *    openssl-core@openssl.org.
- *
- * 5. Products derived from this software may not be called "OpenSSL"
- *    nor may "OpenSSL" appear in their names without prior written
- *    permission of the OpenSSL Project.
- *
- * 6. Redistributions of any form whatsoever must retain the following
- *    acknowledgment:
- *    "This product includes software developed by the OpenSSL Project
- *    for use in the OpenSSL Toolkit (http://www.openssl.org/)"
- *
- * THIS SOFTWARE IS PROVIDED BY THE OpenSSL PROJECT ``AS IS'' AND ANY
- * EXPRESSED OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
- * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR
- * PURPOSE ARE DISCLAIMED.  IN NO EVENT SHALL THE OpenSSL PROJECT OR
- * ITS CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
- * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
- * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
- * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
- * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
- * STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
- * ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED
- * OF THE POSSIBILITY OF SUCH DAMAGE.
- * ====================================================================
- *
- * This product includes cryptographic software written by Eric Young
- * (eay@cryptsoft.com).  This product includes software written by Tim
- * Hudson (tjh@cryptsoft.com).
- *
- */
-
-#include <string.h>
-#include "ui_locl.h"
-
-int UI_UTIL_read_pw_string(char *buf,int length,const char *prompt,int verify)
-	{
-	char buff[BUFSIZ];
-	int ret;
-
-	ret=UI_UTIL_read_pw(buf,buff,(length>BUFSIZ)?BUFSIZ:length,prompt,verify);
-	OPENSSL_cleanse(buff,BUFSIZ);
-	return(ret);
-	}
-
-int UI_UTIL_read_pw(char *buf,char *buff,int size,const char *prompt,int verify)
-	{
-	int ok = 0;
-	UI *ui;
-
-	if (size < 1)
-		return -1;
-
-	ui = UI_new();
-	if (ui)
-		{
-		ok = UI_add_input_string(ui,prompt,0,buf,0,size-1);
-		if (ok >= 0 && verify)
-			ok = UI_add_verify_string(ui,prompt,0,buff,0,size-1,
-				buf);
-		if (ok >= 0)
-			ok=UI_process(ui);
-		UI_free(ui);
-		}
-	if (ok > 0)
-		ok = 0;
-	return(ok);
-	}
diff --git a/crypto/openssl/crypto/uid.c b/crypto/openssl/crypto/uid.c
deleted file mode 100644
index b1fd52badad7..000000000000
--- a/crypto/openssl/crypto/uid.c
+++ /dev/null
@@ -1,89 +0,0 @@
-/* crypto/uid.c */
-/* ====================================================================
- * Copyright (c) 2001 The OpenSSL Project.  All rights reserved.
- *
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions
- * are met:
- *
- * 1. Redistributions of source code must retain the above copyright
- *    notice, this list of conditions and the following disclaimer. 
- *
- * 2. Redistributions in binary form must reproduce the above copyright
- *    notice, this list of conditions and the following disclaimer in
- *    the documentation and/or other materials provided with the
- *    distribution.
- *
- * 3. All advertising materials mentioning features or use of this
- *    software must display the following acknowledgment:
- *    "This product includes software developed by the OpenSSL Project
- *    for use in the OpenSSL Toolkit. (http://www.OpenSSL.org/)"
- *
- * 4. The names "OpenSSL Toolkit" and "OpenSSL Project" must not be used to
- *    endorse or promote products derived from this software without
- *    prior written permission. For written permission, please contact
- *    licensing@OpenSSL.org.
- *
- * 5. Products derived from this software may not be called "OpenSSL"
- *    nor may "OpenSSL" appear in their names without prior written
- *    permission of the OpenSSL Project.
- *
- * 6. Redistributions of any form whatsoever must retain the following
- *    acknowledgment:
- *    "This product includes software developed by the OpenSSL Project
- *    for use in the OpenSSL Toolkit (http://www.OpenSSL.org/)"
- *
- * THIS SOFTWARE IS PROVIDED BY THE OpenSSL PROJECT ``AS IS'' AND ANY
- * EXPRESSED OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
- * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR
- * PURPOSE ARE DISCLAIMED.  IN NO EVENT SHALL THE OpenSSL PROJECT OR
- * ITS CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
- * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
- * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
- * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
- * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
- * STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
- * ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED
- * OF THE POSSIBILITY OF SUCH DAMAGE.
- * ====================================================================
- *
- * This product includes cryptographic software written by Eric Young
- * (eay@cryptsoft.com).  This product includes software written by Tim
- * Hudson (tjh@cryptsoft.com).
- *
- */
-
-#include <openssl/crypto.h>
-#include <openssl/opensslconf.h>
-
-#if defined(__OpenBSD__) || (defined(__FreeBSD__) && __FreeBSD__ > 2)
-
-#include OPENSSL_UNISTD
-
-int OPENSSL_issetugid(void)
-	{
-	return issetugid();
-	}
-
-#elif defined(OPENSSL_SYS_WIN32) || defined(OPENSSL_SYS_VXWORKS) || defined(OPENSSL_SYS_NETWARE)
-
-int OPENSSL_issetugid(void)
-	{
-	return 0;
-	}
-
-#else
-
-#include OPENSSL_UNISTD
-#include <sys/types.h>
-
-int OPENSSL_issetugid(void)
-	{
-	if (getuid() != geteuid()) return 1;
-	if (getgid() != getegid()) return 1;
-	return 0;
-	}
-#endif
-
-
-
diff --git a/crypto/openssl/crypto/x509/Makefile b/crypto/openssl/crypto/x509/Makefile
deleted file mode 100644
index ddcc3124a7b9..000000000000
--- a/crypto/openssl/crypto/x509/Makefile
+++ /dev/null
@@ -1,406 +0,0 @@
-#
-# OpenSSL/crypto/x509/Makefile
-#
-
-DIR=	x509
-TOP=	../..
-CC=	cc
-INCLUDES= -I.. -I$(TOP) -I../../include
-CFLAG=-g
-MAKEFILE=	Makefile
-AR=		ar r
-
-CFLAGS= $(INCLUDES) $(CFLAG)
-
-GENERAL=Makefile README
-TEST=
-APPS=
-
-LIB=$(TOP)/libcrypto.a
-LIBSRC=	x509_def.c x509_d2.c x509_r2x.c x509_cmp.c \
-	x509_obj.c x509_req.c x509spki.c x509_vfy.c \
-	x509_set.c x509cset.c x509rset.c x509_err.c \
-	x509name.c x509_v3.c x509_ext.c x509_att.c \
-	x509type.c x509_lu.c x_all.c x509_txt.c \
-	x509_trs.c by_file.c by_dir.c x509_vpm.c
-LIBOBJ= x509_def.o x509_d2.o x509_r2x.o x509_cmp.o \
-	x509_obj.o x509_req.o x509spki.o x509_vfy.o \
-	x509_set.o x509cset.o x509rset.o x509_err.o \
-	x509name.o x509_v3.o x509_ext.o x509_att.o \
-	x509type.o x509_lu.o x_all.o x509_txt.o \
-	x509_trs.o by_file.o by_dir.o x509_vpm.o
-
-SRC= $(LIBSRC)
-
-EXHEADER= x509.h x509_vfy.h
-HEADER=	$(EXHEADER)
-
-ALL=    $(GENERAL) $(SRC) $(HEADER)
-
-top:
-	(cd ../..; $(MAKE) DIRS=crypto SDIRS=$(DIR) sub_all)
-
-all:	lib
-
-lib:	$(LIBOBJ)
-	$(AR) $(LIB) $(LIBOBJ)
-	$(RANLIB) $(LIB) || echo Never mind.
-	@touch lib
-
-files:
-	$(PERL) $(TOP)/util/files.pl Makefile.ssl >> $(TOP)/MINFO
-
-links:
-	@$(PERL) $(TOP)/util/mklink.pl ../../include/openssl $(EXHEADER)
-	@$(PERL) $(TOP)/util/mklink.pl ../../test $(TEST)
-	@$(PERL) $(TOP)/util/mklink.pl ../../apps $(APPS)
-
-install:
-	@[ -n "$(INSTALLTOP)" ] # should be set by top Makefile...
-	@headerlist="$(EXHEADER)"; for i in $$headerlist ; \
-	do  \
-	(cp $$i $(INSTALL_PREFIX)$(INSTALLTOP)/include/openssl/$$i; \
-	chmod 644 $(INSTALL_PREFIX)$(INSTALLTOP)/include/openssl/$$i ); \
-	done;
-
-tags:
-	ctags $(SRC)
-
-tests:
-
-lint:
-	lint -DLINT $(INCLUDES) $(SRC)>fluff
-
-depend:
-	@[ -n "$(MAKEDEPEND)" ] # should be set by upper Makefile...
-	$(MAKEDEPEND) -- $(CFLAG) $(INCLUDES) $(DEPFLAG) -- $(PROGS) $(LIBSRC)
-
-dclean:
-	$(PERL) -pe 'if (/^# DO NOT DELETE THIS LINE/) {print; exit(0);}' $(MAKEFILE) >Makefile.new
-	mv -f Makefile.new $(MAKEFILE)
-
-clean:
-	rm -f *.o *.obj lib tags core .pure .nfs* *.old *.bak fluff
-
-# DO NOT DELETE THIS LINE -- make depend depends on it.
-
-by_dir.o: ../../e_os.h ../../include/openssl/asn1.h ../../include/openssl/bio.h
-by_dir.o: ../../include/openssl/buffer.h ../../include/openssl/crypto.h
-by_dir.o: ../../include/openssl/e_os2.h ../../include/openssl/ec.h
-by_dir.o: ../../include/openssl/ecdh.h ../../include/openssl/ecdsa.h
-by_dir.o: ../../include/openssl/err.h ../../include/openssl/evp.h
-by_dir.o: ../../include/openssl/lhash.h ../../include/openssl/obj_mac.h
-by_dir.o: ../../include/openssl/objects.h ../../include/openssl/opensslconf.h
-by_dir.o: ../../include/openssl/opensslv.h ../../include/openssl/ossl_typ.h
-by_dir.o: ../../include/openssl/pkcs7.h ../../include/openssl/safestack.h
-by_dir.o: ../../include/openssl/sha.h ../../include/openssl/stack.h
-by_dir.o: ../../include/openssl/symhacks.h ../../include/openssl/x509.h
-by_dir.o: ../../include/openssl/x509_vfy.h ../cryptlib.h by_dir.c
-by_file.o: ../../e_os.h ../../include/openssl/asn1.h
-by_file.o: ../../include/openssl/bio.h ../../include/openssl/buffer.h
-by_file.o: ../../include/openssl/crypto.h ../../include/openssl/e_os2.h
-by_file.o: ../../include/openssl/ec.h ../../include/openssl/ecdh.h
-by_file.o: ../../include/openssl/ecdsa.h ../../include/openssl/err.h
-by_file.o: ../../include/openssl/evp.h ../../include/openssl/lhash.h
-by_file.o: ../../include/openssl/obj_mac.h ../../include/openssl/objects.h
-by_file.o: ../../include/openssl/opensslconf.h ../../include/openssl/opensslv.h
-by_file.o: ../../include/openssl/ossl_typ.h ../../include/openssl/pem.h
-by_file.o: ../../include/openssl/pem2.h ../../include/openssl/pkcs7.h
-by_file.o: ../../include/openssl/safestack.h ../../include/openssl/sha.h
-by_file.o: ../../include/openssl/stack.h ../../include/openssl/symhacks.h
-by_file.o: ../../include/openssl/x509.h ../../include/openssl/x509_vfy.h
-by_file.o: ../cryptlib.h by_file.c
-x509_att.o: ../../e_os.h ../../include/openssl/asn1.h
-x509_att.o: ../../include/openssl/bio.h ../../include/openssl/buffer.h
-x509_att.o: ../../include/openssl/conf.h ../../include/openssl/crypto.h
-x509_att.o: ../../include/openssl/e_os2.h ../../include/openssl/ec.h
-x509_att.o: ../../include/openssl/ecdh.h ../../include/openssl/ecdsa.h
-x509_att.o: ../../include/openssl/err.h ../../include/openssl/evp.h
-x509_att.o: ../../include/openssl/lhash.h ../../include/openssl/obj_mac.h
-x509_att.o: ../../include/openssl/objects.h ../../include/openssl/opensslconf.h
-x509_att.o: ../../include/openssl/opensslv.h ../../include/openssl/ossl_typ.h
-x509_att.o: ../../include/openssl/pkcs7.h ../../include/openssl/safestack.h
-x509_att.o: ../../include/openssl/sha.h ../../include/openssl/stack.h
-x509_att.o: ../../include/openssl/symhacks.h ../../include/openssl/x509.h
-x509_att.o: ../../include/openssl/x509_vfy.h ../../include/openssl/x509v3.h
-x509_att.o: ../cryptlib.h x509_att.c
-x509_cmp.o: ../../e_os.h ../../include/openssl/asn1.h
-x509_cmp.o: ../../include/openssl/bio.h ../../include/openssl/buffer.h
-x509_cmp.o: ../../include/openssl/conf.h ../../include/openssl/crypto.h
-x509_cmp.o: ../../include/openssl/e_os2.h ../../include/openssl/ec.h
-x509_cmp.o: ../../include/openssl/ecdh.h ../../include/openssl/ecdsa.h
-x509_cmp.o: ../../include/openssl/err.h ../../include/openssl/evp.h
-x509_cmp.o: ../../include/openssl/lhash.h ../../include/openssl/obj_mac.h
-x509_cmp.o: ../../include/openssl/objects.h ../../include/openssl/opensslconf.h
-x509_cmp.o: ../../include/openssl/opensslv.h ../../include/openssl/ossl_typ.h
-x509_cmp.o: ../../include/openssl/pkcs7.h ../../include/openssl/safestack.h
-x509_cmp.o: ../../include/openssl/sha.h ../../include/openssl/stack.h
-x509_cmp.o: ../../include/openssl/symhacks.h ../../include/openssl/x509.h
-x509_cmp.o: ../../include/openssl/x509_vfy.h ../../include/openssl/x509v3.h
-x509_cmp.o: ../cryptlib.h x509_cmp.c
-x509_d2.o: ../../e_os.h ../../include/openssl/asn1.h
-x509_d2.o: ../../include/openssl/bio.h ../../include/openssl/buffer.h
-x509_d2.o: ../../include/openssl/crypto.h ../../include/openssl/e_os2.h
-x509_d2.o: ../../include/openssl/ec.h ../../include/openssl/ecdh.h
-x509_d2.o: ../../include/openssl/ecdsa.h ../../include/openssl/err.h
-x509_d2.o: ../../include/openssl/evp.h ../../include/openssl/lhash.h
-x509_d2.o: ../../include/openssl/obj_mac.h ../../include/openssl/objects.h
-x509_d2.o: ../../include/openssl/opensslconf.h ../../include/openssl/opensslv.h
-x509_d2.o: ../../include/openssl/ossl_typ.h ../../include/openssl/pkcs7.h
-x509_d2.o: ../../include/openssl/safestack.h ../../include/openssl/sha.h
-x509_d2.o: ../../include/openssl/stack.h ../../include/openssl/symhacks.h
-x509_d2.o: ../../include/openssl/x509.h ../../include/openssl/x509_vfy.h
-x509_d2.o: ../cryptlib.h x509_d2.c
-x509_def.o: ../../e_os.h ../../include/openssl/asn1.h
-x509_def.o: ../../include/openssl/bio.h ../../include/openssl/buffer.h
-x509_def.o: ../../include/openssl/crypto.h ../../include/openssl/e_os2.h
-x509_def.o: ../../include/openssl/ec.h ../../include/openssl/ecdh.h
-x509_def.o: ../../include/openssl/ecdsa.h ../../include/openssl/err.h
-x509_def.o: ../../include/openssl/evp.h ../../include/openssl/lhash.h
-x509_def.o: ../../include/openssl/obj_mac.h ../../include/openssl/objects.h
-x509_def.o: ../../include/openssl/opensslconf.h
-x509_def.o: ../../include/openssl/opensslv.h ../../include/openssl/ossl_typ.h
-x509_def.o: ../../include/openssl/pkcs7.h ../../include/openssl/safestack.h
-x509_def.o: ../../include/openssl/sha.h ../../include/openssl/stack.h
-x509_def.o: ../../include/openssl/symhacks.h ../../include/openssl/x509.h
-x509_def.o: ../../include/openssl/x509_vfy.h ../cryptlib.h x509_def.c
-x509_err.o: ../../include/openssl/asn1.h ../../include/openssl/bio.h
-x509_err.o: ../../include/openssl/buffer.h ../../include/openssl/crypto.h
-x509_err.o: ../../include/openssl/e_os2.h ../../include/openssl/ec.h
-x509_err.o: ../../include/openssl/ecdh.h ../../include/openssl/ecdsa.h
-x509_err.o: ../../include/openssl/err.h ../../include/openssl/evp.h
-x509_err.o: ../../include/openssl/lhash.h ../../include/openssl/obj_mac.h
-x509_err.o: ../../include/openssl/objects.h ../../include/openssl/opensslconf.h
-x509_err.o: ../../include/openssl/opensslv.h ../../include/openssl/ossl_typ.h
-x509_err.o: ../../include/openssl/pkcs7.h ../../include/openssl/safestack.h
-x509_err.o: ../../include/openssl/sha.h ../../include/openssl/stack.h
-x509_err.o: ../../include/openssl/symhacks.h ../../include/openssl/x509.h
-x509_err.o: ../../include/openssl/x509_vfy.h x509_err.c
-x509_ext.o: ../../e_os.h ../../include/openssl/asn1.h
-x509_ext.o: ../../include/openssl/bio.h ../../include/openssl/buffer.h
-x509_ext.o: ../../include/openssl/conf.h ../../include/openssl/crypto.h
-x509_ext.o: ../../include/openssl/e_os2.h ../../include/openssl/ec.h
-x509_ext.o: ../../include/openssl/ecdh.h ../../include/openssl/ecdsa.h
-x509_ext.o: ../../include/openssl/err.h ../../include/openssl/evp.h
-x509_ext.o: ../../include/openssl/lhash.h ../../include/openssl/obj_mac.h
-x509_ext.o: ../../include/openssl/objects.h ../../include/openssl/opensslconf.h
-x509_ext.o: ../../include/openssl/opensslv.h ../../include/openssl/ossl_typ.h
-x509_ext.o: ../../include/openssl/pkcs7.h ../../include/openssl/safestack.h
-x509_ext.o: ../../include/openssl/sha.h ../../include/openssl/stack.h
-x509_ext.o: ../../include/openssl/symhacks.h ../../include/openssl/x509.h
-x509_ext.o: ../../include/openssl/x509_vfy.h ../../include/openssl/x509v3.h
-x509_ext.o: ../cryptlib.h x509_ext.c
-x509_lu.o: ../../e_os.h ../../include/openssl/asn1.h
-x509_lu.o: ../../include/openssl/bio.h ../../include/openssl/buffer.h
-x509_lu.o: ../../include/openssl/conf.h ../../include/openssl/crypto.h
-x509_lu.o: ../../include/openssl/e_os2.h ../../include/openssl/ec.h
-x509_lu.o: ../../include/openssl/ecdh.h ../../include/openssl/ecdsa.h
-x509_lu.o: ../../include/openssl/err.h ../../include/openssl/evp.h
-x509_lu.o: ../../include/openssl/lhash.h ../../include/openssl/obj_mac.h
-x509_lu.o: ../../include/openssl/objects.h ../../include/openssl/opensslconf.h
-x509_lu.o: ../../include/openssl/opensslv.h ../../include/openssl/ossl_typ.h
-x509_lu.o: ../../include/openssl/pkcs7.h ../../include/openssl/safestack.h
-x509_lu.o: ../../include/openssl/sha.h ../../include/openssl/stack.h
-x509_lu.o: ../../include/openssl/symhacks.h ../../include/openssl/x509.h
-x509_lu.o: ../../include/openssl/x509_vfy.h ../../include/openssl/x509v3.h
-x509_lu.o: ../cryptlib.h x509_lu.c
-x509_obj.o: ../../e_os.h ../../include/openssl/asn1.h
-x509_obj.o: ../../include/openssl/bio.h ../../include/openssl/buffer.h
-x509_obj.o: ../../include/openssl/crypto.h ../../include/openssl/e_os2.h
-x509_obj.o: ../../include/openssl/ec.h ../../include/openssl/ecdh.h
-x509_obj.o: ../../include/openssl/ecdsa.h ../../include/openssl/err.h
-x509_obj.o: ../../include/openssl/evp.h ../../include/openssl/lhash.h
-x509_obj.o: ../../include/openssl/obj_mac.h ../../include/openssl/objects.h
-x509_obj.o: ../../include/openssl/opensslconf.h
-x509_obj.o: ../../include/openssl/opensslv.h ../../include/openssl/ossl_typ.h
-x509_obj.o: ../../include/openssl/pkcs7.h ../../include/openssl/safestack.h
-x509_obj.o: ../../include/openssl/sha.h ../../include/openssl/stack.h
-x509_obj.o: ../../include/openssl/symhacks.h ../../include/openssl/x509.h
-x509_obj.o: ../../include/openssl/x509_vfy.h ../cryptlib.h x509_obj.c
-x509_r2x.o: ../../e_os.h ../../include/openssl/asn1.h
-x509_r2x.o: ../../include/openssl/bio.h ../../include/openssl/bn.h
-x509_r2x.o: ../../include/openssl/buffer.h ../../include/openssl/crypto.h
-x509_r2x.o: ../../include/openssl/e_os2.h ../../include/openssl/ec.h
-x509_r2x.o: ../../include/openssl/ecdh.h ../../include/openssl/ecdsa.h
-x509_r2x.o: ../../include/openssl/err.h ../../include/openssl/evp.h
-x509_r2x.o: ../../include/openssl/lhash.h ../../include/openssl/obj_mac.h
-x509_r2x.o: ../../include/openssl/objects.h ../../include/openssl/opensslconf.h
-x509_r2x.o: ../../include/openssl/opensslv.h ../../include/openssl/ossl_typ.h
-x509_r2x.o: ../../include/openssl/pkcs7.h ../../include/openssl/safestack.h
-x509_r2x.o: ../../include/openssl/sha.h ../../include/openssl/stack.h
-x509_r2x.o: ../../include/openssl/symhacks.h ../../include/openssl/x509.h
-x509_r2x.o: ../../include/openssl/x509_vfy.h ../cryptlib.h x509_r2x.c
-x509_req.o: ../../e_os.h ../../include/openssl/asn1.h
-x509_req.o: ../../include/openssl/bio.h ../../include/openssl/bn.h
-x509_req.o: ../../include/openssl/buffer.h ../../include/openssl/crypto.h
-x509_req.o: ../../include/openssl/e_os2.h ../../include/openssl/ec.h
-x509_req.o: ../../include/openssl/ecdh.h ../../include/openssl/ecdsa.h
-x509_req.o: ../../include/openssl/err.h ../../include/openssl/evp.h
-x509_req.o: ../../include/openssl/lhash.h ../../include/openssl/obj_mac.h
-x509_req.o: ../../include/openssl/objects.h ../../include/openssl/opensslconf.h
-x509_req.o: ../../include/openssl/opensslv.h ../../include/openssl/ossl_typ.h
-x509_req.o: ../../include/openssl/pem.h ../../include/openssl/pem2.h
-x509_req.o: ../../include/openssl/pkcs7.h ../../include/openssl/safestack.h
-x509_req.o: ../../include/openssl/sha.h ../../include/openssl/stack.h
-x509_req.o: ../../include/openssl/symhacks.h ../../include/openssl/x509.h
-x509_req.o: ../../include/openssl/x509_vfy.h ../cryptlib.h x509_req.c
-x509_set.o: ../../e_os.h ../../include/openssl/asn1.h
-x509_set.o: ../../include/openssl/bio.h ../../include/openssl/buffer.h
-x509_set.o: ../../include/openssl/crypto.h ../../include/openssl/e_os2.h
-x509_set.o: ../../include/openssl/ec.h ../../include/openssl/ecdh.h
-x509_set.o: ../../include/openssl/ecdsa.h ../../include/openssl/err.h
-x509_set.o: ../../include/openssl/evp.h ../../include/openssl/lhash.h
-x509_set.o: ../../include/openssl/obj_mac.h ../../include/openssl/objects.h
-x509_set.o: ../../include/openssl/opensslconf.h
-x509_set.o: ../../include/openssl/opensslv.h ../../include/openssl/ossl_typ.h
-x509_set.o: ../../include/openssl/pkcs7.h ../../include/openssl/safestack.h
-x509_set.o: ../../include/openssl/sha.h ../../include/openssl/stack.h
-x509_set.o: ../../include/openssl/symhacks.h ../../include/openssl/x509.h
-x509_set.o: ../../include/openssl/x509_vfy.h ../cryptlib.h x509_set.c
-x509_trs.o: ../../e_os.h ../../include/openssl/asn1.h
-x509_trs.o: ../../include/openssl/bio.h ../../include/openssl/buffer.h
-x509_trs.o: ../../include/openssl/conf.h ../../include/openssl/crypto.h
-x509_trs.o: ../../include/openssl/e_os2.h ../../include/openssl/ec.h
-x509_trs.o: ../../include/openssl/ecdh.h ../../include/openssl/ecdsa.h
-x509_trs.o: ../../include/openssl/err.h ../../include/openssl/evp.h
-x509_trs.o: ../../include/openssl/lhash.h ../../include/openssl/obj_mac.h
-x509_trs.o: ../../include/openssl/objects.h ../../include/openssl/opensslconf.h
-x509_trs.o: ../../include/openssl/opensslv.h ../../include/openssl/ossl_typ.h
-x509_trs.o: ../../include/openssl/pkcs7.h ../../include/openssl/safestack.h
-x509_trs.o: ../../include/openssl/sha.h ../../include/openssl/stack.h
-x509_trs.o: ../../include/openssl/symhacks.h ../../include/openssl/x509.h
-x509_trs.o: ../../include/openssl/x509_vfy.h ../../include/openssl/x509v3.h
-x509_trs.o: ../cryptlib.h x509_trs.c
-x509_txt.o: ../../e_os.h ../../include/openssl/asn1.h
-x509_txt.o: ../../include/openssl/bio.h ../../include/openssl/buffer.h
-x509_txt.o: ../../include/openssl/crypto.h ../../include/openssl/e_os2.h
-x509_txt.o: ../../include/openssl/ec.h ../../include/openssl/ecdh.h
-x509_txt.o: ../../include/openssl/ecdsa.h ../../include/openssl/err.h
-x509_txt.o: ../../include/openssl/evp.h ../../include/openssl/lhash.h
-x509_txt.o: ../../include/openssl/obj_mac.h ../../include/openssl/objects.h
-x509_txt.o: ../../include/openssl/opensslconf.h
-x509_txt.o: ../../include/openssl/opensslv.h ../../include/openssl/ossl_typ.h
-x509_txt.o: ../../include/openssl/pkcs7.h ../../include/openssl/safestack.h
-x509_txt.o: ../../include/openssl/sha.h ../../include/openssl/stack.h
-x509_txt.o: ../../include/openssl/symhacks.h ../../include/openssl/x509.h
-x509_txt.o: ../../include/openssl/x509_vfy.h ../cryptlib.h x509_txt.c
-x509_v3.o: ../../e_os.h ../../include/openssl/asn1.h
-x509_v3.o: ../../include/openssl/bio.h ../../include/openssl/buffer.h
-x509_v3.o: ../../include/openssl/conf.h ../../include/openssl/crypto.h
-x509_v3.o: ../../include/openssl/e_os2.h ../../include/openssl/ec.h
-x509_v3.o: ../../include/openssl/ecdh.h ../../include/openssl/ecdsa.h
-x509_v3.o: ../../include/openssl/err.h ../../include/openssl/evp.h
-x509_v3.o: ../../include/openssl/lhash.h ../../include/openssl/obj_mac.h
-x509_v3.o: ../../include/openssl/objects.h ../../include/openssl/opensslconf.h
-x509_v3.o: ../../include/openssl/opensslv.h ../../include/openssl/ossl_typ.h
-x509_v3.o: ../../include/openssl/pkcs7.h ../../include/openssl/safestack.h
-x509_v3.o: ../../include/openssl/sha.h ../../include/openssl/stack.h
-x509_v3.o: ../../include/openssl/symhacks.h ../../include/openssl/x509.h
-x509_v3.o: ../../include/openssl/x509_vfy.h ../../include/openssl/x509v3.h
-x509_v3.o: ../cryptlib.h x509_v3.c
-x509_vfy.o: ../../e_os.h ../../include/openssl/asn1.h
-x509_vfy.o: ../../include/openssl/bio.h ../../include/openssl/buffer.h
-x509_vfy.o: ../../include/openssl/conf.h ../../include/openssl/crypto.h
-x509_vfy.o: ../../include/openssl/e_os2.h ../../include/openssl/ec.h
-x509_vfy.o: ../../include/openssl/ecdh.h ../../include/openssl/ecdsa.h
-x509_vfy.o: ../../include/openssl/err.h ../../include/openssl/evp.h
-x509_vfy.o: ../../include/openssl/lhash.h ../../include/openssl/obj_mac.h
-x509_vfy.o: ../../include/openssl/objects.h ../../include/openssl/opensslconf.h
-x509_vfy.o: ../../include/openssl/opensslv.h ../../include/openssl/ossl_typ.h
-x509_vfy.o: ../../include/openssl/pkcs7.h ../../include/openssl/safestack.h
-x509_vfy.o: ../../include/openssl/sha.h ../../include/openssl/stack.h
-x509_vfy.o: ../../include/openssl/symhacks.h ../../include/openssl/x509.h
-x509_vfy.o: ../../include/openssl/x509_vfy.h ../../include/openssl/x509v3.h
-x509_vfy.o: ../cryptlib.h x509_vfy.c
-x509_vpm.o: ../../e_os.h ../../include/openssl/asn1.h
-x509_vpm.o: ../../include/openssl/bio.h ../../include/openssl/buffer.h
-x509_vpm.o: ../../include/openssl/conf.h ../../include/openssl/crypto.h
-x509_vpm.o: ../../include/openssl/e_os2.h ../../include/openssl/ec.h
-x509_vpm.o: ../../include/openssl/ecdh.h ../../include/openssl/ecdsa.h
-x509_vpm.o: ../../include/openssl/err.h ../../include/openssl/evp.h
-x509_vpm.o: ../../include/openssl/lhash.h ../../include/openssl/obj_mac.h
-x509_vpm.o: ../../include/openssl/objects.h ../../include/openssl/opensslconf.h
-x509_vpm.o: ../../include/openssl/opensslv.h ../../include/openssl/ossl_typ.h
-x509_vpm.o: ../../include/openssl/pkcs7.h ../../include/openssl/safestack.h
-x509_vpm.o: ../../include/openssl/sha.h ../../include/openssl/stack.h
-x509_vpm.o: ../../include/openssl/symhacks.h ../../include/openssl/x509.h
-x509_vpm.o: ../../include/openssl/x509_vfy.h ../../include/openssl/x509v3.h
-x509_vpm.o: ../cryptlib.h x509_vpm.c
-x509cset.o: ../../e_os.h ../../include/openssl/asn1.h
-x509cset.o: ../../include/openssl/bio.h ../../include/openssl/buffer.h
-x509cset.o: ../../include/openssl/crypto.h ../../include/openssl/e_os2.h
-x509cset.o: ../../include/openssl/ec.h ../../include/openssl/ecdh.h
-x509cset.o: ../../include/openssl/ecdsa.h ../../include/openssl/err.h
-x509cset.o: ../../include/openssl/evp.h ../../include/openssl/lhash.h
-x509cset.o: ../../include/openssl/obj_mac.h ../../include/openssl/objects.h
-x509cset.o: ../../include/openssl/opensslconf.h
-x509cset.o: ../../include/openssl/opensslv.h ../../include/openssl/ossl_typ.h
-x509cset.o: ../../include/openssl/pkcs7.h ../../include/openssl/safestack.h
-x509cset.o: ../../include/openssl/sha.h ../../include/openssl/stack.h
-x509cset.o: ../../include/openssl/symhacks.h ../../include/openssl/x509.h
-x509cset.o: ../../include/openssl/x509_vfy.h ../cryptlib.h x509cset.c
-x509name.o: ../../e_os.h ../../include/openssl/asn1.h
-x509name.o: ../../include/openssl/bio.h ../../include/openssl/buffer.h
-x509name.o: ../../include/openssl/crypto.h ../../include/openssl/e_os2.h
-x509name.o: ../../include/openssl/ec.h ../../include/openssl/ecdh.h
-x509name.o: ../../include/openssl/ecdsa.h ../../include/openssl/err.h
-x509name.o: ../../include/openssl/evp.h ../../include/openssl/lhash.h
-x509name.o: ../../include/openssl/obj_mac.h ../../include/openssl/objects.h
-x509name.o: ../../include/openssl/opensslconf.h
-x509name.o: ../../include/openssl/opensslv.h ../../include/openssl/ossl_typ.h
-x509name.o: ../../include/openssl/pkcs7.h ../../include/openssl/safestack.h
-x509name.o: ../../include/openssl/sha.h ../../include/openssl/stack.h
-x509name.o: ../../include/openssl/symhacks.h ../../include/openssl/x509.h
-x509name.o: ../../include/openssl/x509_vfy.h ../cryptlib.h x509name.c
-x509rset.o: ../../e_os.h ../../include/openssl/asn1.h
-x509rset.o: ../../include/openssl/bio.h ../../include/openssl/buffer.h
-x509rset.o: ../../include/openssl/crypto.h ../../include/openssl/e_os2.h
-x509rset.o: ../../include/openssl/ec.h ../../include/openssl/ecdh.h
-x509rset.o: ../../include/openssl/ecdsa.h ../../include/openssl/err.h
-x509rset.o: ../../include/openssl/evp.h ../../include/openssl/lhash.h
-x509rset.o: ../../include/openssl/obj_mac.h ../../include/openssl/objects.h
-x509rset.o: ../../include/openssl/opensslconf.h
-x509rset.o: ../../include/openssl/opensslv.h ../../include/openssl/ossl_typ.h
-x509rset.o: ../../include/openssl/pkcs7.h ../../include/openssl/safestack.h
-x509rset.o: ../../include/openssl/sha.h ../../include/openssl/stack.h
-x509rset.o: ../../include/openssl/symhacks.h ../../include/openssl/x509.h
-x509rset.o: ../../include/openssl/x509_vfy.h ../cryptlib.h x509rset.c
-x509spki.o: ../../e_os.h ../../include/openssl/asn1.h
-x509spki.o: ../../include/openssl/bio.h ../../include/openssl/buffer.h
-x509spki.o: ../../include/openssl/crypto.h ../../include/openssl/e_os2.h
-x509spki.o: ../../include/openssl/ec.h ../../include/openssl/ecdh.h
-x509spki.o: ../../include/openssl/ecdsa.h ../../include/openssl/err.h
-x509spki.o: ../../include/openssl/evp.h ../../include/openssl/lhash.h
-x509spki.o: ../../include/openssl/obj_mac.h ../../include/openssl/objects.h
-x509spki.o: ../../include/openssl/opensslconf.h
-x509spki.o: ../../include/openssl/opensslv.h ../../include/openssl/ossl_typ.h
-x509spki.o: ../../include/openssl/pkcs7.h ../../include/openssl/safestack.h
-x509spki.o: ../../include/openssl/sha.h ../../include/openssl/stack.h
-x509spki.o: ../../include/openssl/symhacks.h ../../include/openssl/x509.h
-x509spki.o: ../../include/openssl/x509_vfy.h ../cryptlib.h x509spki.c
-x509type.o: ../../e_os.h ../../include/openssl/asn1.h
-x509type.o: ../../include/openssl/bio.h ../../include/openssl/buffer.h
-x509type.o: ../../include/openssl/crypto.h ../../include/openssl/e_os2.h
-x509type.o: ../../include/openssl/ec.h ../../include/openssl/ecdh.h
-x509type.o: ../../include/openssl/ecdsa.h ../../include/openssl/err.h
-x509type.o: ../../include/openssl/evp.h ../../include/openssl/lhash.h
-x509type.o: ../../include/openssl/obj_mac.h ../../include/openssl/objects.h
-x509type.o: ../../include/openssl/opensslconf.h
-x509type.o: ../../include/openssl/opensslv.h ../../include/openssl/ossl_typ.h
-x509type.o: ../../include/openssl/pkcs7.h ../../include/openssl/safestack.h
-x509type.o: ../../include/openssl/sha.h ../../include/openssl/stack.h
-x509type.o: ../../include/openssl/symhacks.h ../../include/openssl/x509.h
-x509type.o: ../../include/openssl/x509_vfy.h ../cryptlib.h x509type.c
-x_all.o: ../../e_os.h ../../include/openssl/asn1.h ../../include/openssl/bio.h
-x_all.o: ../../include/openssl/buffer.h ../../include/openssl/crypto.h
-x_all.o: ../../include/openssl/dsa.h ../../include/openssl/e_os2.h
-x_all.o: ../../include/openssl/ec.h ../../include/openssl/ecdh.h
-x_all.o: ../../include/openssl/ecdsa.h ../../include/openssl/err.h
-x_all.o: ../../include/openssl/evp.h ../../include/openssl/lhash.h
-x_all.o: ../../include/openssl/obj_mac.h ../../include/openssl/objects.h
-x_all.o: ../../include/openssl/opensslconf.h ../../include/openssl/opensslv.h
-x_all.o: ../../include/openssl/ossl_typ.h ../../include/openssl/pkcs7.h
-x_all.o: ../../include/openssl/rsa.h ../../include/openssl/safestack.h
-x_all.o: ../../include/openssl/sha.h ../../include/openssl/stack.h
-x_all.o: ../../include/openssl/symhacks.h ../../include/openssl/x509.h
-x_all.o: ../../include/openssl/x509_vfy.h ../cryptlib.h x_all.c
diff --git a/crypto/openssl/crypto/x509/by_dir.c b/crypto/openssl/crypto/x509/by_dir.c
deleted file mode 100644
index 37f9a4820693..000000000000
--- a/crypto/openssl/crypto/x509/by_dir.c
+++ /dev/null
@@ -1,382 +0,0 @@
-/* crypto/x509/by_dir.c */
-/* Copyright (C) 1995-1998 Eric Young (eay@cryptsoft.com)
- * All rights reserved.
- *
- * This package is an SSL implementation written
- * by Eric Young (eay@cryptsoft.com).
- * The implementation was written so as to conform with Netscapes SSL.
- * 
- * This library is free for commercial and non-commercial use as long as
- * the following conditions are aheared to.  The following conditions
- * apply to all code found in this distribution, be it the RC4, RSA,
- * lhash, DES, etc., code; not just the SSL code.  The SSL documentation
- * included with this distribution is covered by the same copyright terms
- * except that the holder is Tim Hudson (tjh@cryptsoft.com).
- * 
- * Copyright remains Eric Young's, and as such any Copyright notices in
- * the code are not to be removed.
- * If this package is used in a product, Eric Young should be given attribution
- * as the author of the parts of the library used.
- * This can be in the form of a textual message at program startup or
- * in documentation (online or textual) provided with the package.
- * 
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions
- * are met:
- * 1. Redistributions of source code must retain the copyright
- *    notice, this list of conditions and the following disclaimer.
- * 2. Redistributions in binary form must reproduce the above copyright
- *    notice, this list of conditions and the following disclaimer in the
- *    documentation and/or other materials provided with the distribution.
- * 3. All advertising materials mentioning features or use of this software
- *    must display the following acknowledgement:
- *    "This product includes cryptographic software written by
- *     Eric Young (eay@cryptsoft.com)"
- *    The word 'cryptographic' can be left out if the rouines from the library
- *    being used are not cryptographic related :-).
- * 4. If you include any Windows specific code (or a derivative thereof) from 
- *    the apps directory (application code) you must include an acknowledgement:
- *    "This product includes software written by Tim Hudson (tjh@cryptsoft.com)"
- * 
- * THIS SOFTWARE IS PROVIDED BY ERIC YOUNG ``AS IS'' AND
- * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
- * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
- * ARE DISCLAIMED.  IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE
- * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
- * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
- * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
- * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
- * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
- * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
- * SUCH DAMAGE.
- * 
- * The licence and distribution terms for any publically available version or
- * derivative of this code cannot be changed.  i.e. this code cannot simply be
- * copied and put under another distribution licence
- * [including the GNU Public Licence.]
- */
-
-#include <stdio.h>
-#include <time.h>
-#include <errno.h>
-
-#include "cryptlib.h"
-
-#ifndef NO_SYS_TYPES_H
-# include <sys/types.h>
-#endif
-#ifdef MAC_OS_pre_X
-# include <stat.h>
-#else
-# include <sys/stat.h>
-#endif
-
-#include <openssl/lhash.h>
-#include <openssl/x509.h>
-
-typedef struct lookup_dir_st
-	{
-	BUF_MEM *buffer;
-	int num_dirs;
-	char **dirs;
-	int *dirs_type;
-	int num_dirs_alloced;
-	} BY_DIR;
-
-static int dir_ctrl(X509_LOOKUP *ctx, int cmd, const char *argp, long argl,
-	char **ret);
-static int new_dir(X509_LOOKUP *lu);
-static void free_dir(X509_LOOKUP *lu);
-static int add_cert_dir(BY_DIR *ctx,const char *dir,int type);
-static int get_cert_by_subject(X509_LOOKUP *xl,int type,X509_NAME *name,
-	X509_OBJECT *ret);
-X509_LOOKUP_METHOD x509_dir_lookup=
-	{
-	"Load certs from files in a directory",
-	new_dir,		/* new */
-	free_dir,		/* free */
-	NULL, 			/* init */
-	NULL,			/* shutdown */
-	dir_ctrl,		/* ctrl */
-	get_cert_by_subject,	/* get_by_subject */
-	NULL,			/* get_by_issuer_serial */
-	NULL,			/* get_by_fingerprint */
-	NULL,			/* get_by_alias */
-	};
-
-X509_LOOKUP_METHOD *X509_LOOKUP_hash_dir(void)
-	{
-	return(&x509_dir_lookup);
-	}
-
-static int dir_ctrl(X509_LOOKUP *ctx, int cmd, const char *argp, long argl,
-	     char **retp)
-	{
-	int ret=0;
-	BY_DIR *ld;
-	char *dir = NULL;
-
-	ld=(BY_DIR *)ctx->method_data;
-
-	switch (cmd)
-		{
-	case X509_L_ADD_DIR:
-		if (argl == X509_FILETYPE_DEFAULT)
-			{
-			dir=(char *)Getenv(X509_get_default_cert_dir_env());
-			if (dir)
-				ret=add_cert_dir(ld,dir,X509_FILETYPE_PEM);
-			else
-				ret=add_cert_dir(ld,X509_get_default_cert_dir(),
-					X509_FILETYPE_PEM);
-			if (!ret)
-				{
-				X509err(X509_F_DIR_CTRL,X509_R_LOADING_CERT_DIR);
-				}
-			}
-		else
-			ret=add_cert_dir(ld,argp,(int)argl);
-		break;
-		}
-	return(ret);
-	}
-
-static int new_dir(X509_LOOKUP *lu)
-	{
-	BY_DIR *a;
-
-	if ((a=(BY_DIR *)OPENSSL_malloc(sizeof(BY_DIR))) == NULL)
-		return(0);
-	if ((a->buffer=BUF_MEM_new()) == NULL)
-		{
-		OPENSSL_free(a);
-		return(0);
-		}
-	a->num_dirs=0;
-	a->dirs=NULL;
-	a->dirs_type=NULL;
-	a->num_dirs_alloced=0;
-	lu->method_data=(char *)a;
-	return(1);
-	}
-
-static void free_dir(X509_LOOKUP *lu)
-	{
-	BY_DIR *a;
-	int i;
-
-	a=(BY_DIR *)lu->method_data;
-	for (i=0; i<a->num_dirs; i++)
-		if (a->dirs[i] != NULL) OPENSSL_free(a->dirs[i]);
-	if (a->dirs != NULL) OPENSSL_free(a->dirs);
-	if (a->dirs_type != NULL) OPENSSL_free(a->dirs_type);
-	if (a->buffer != NULL) BUF_MEM_free(a->buffer);
-	OPENSSL_free(a);
-	}
-
-static int add_cert_dir(BY_DIR *ctx, const char *dir, int type)
-	{
-	int j,len;
-	int *ip;
-	const char *s,*ss,*p;
-	char **pp;
-
-	if (dir == NULL || !*dir)
-	    {
-	    X509err(X509_F_ADD_CERT_DIR,X509_R_INVALID_DIRECTORY);
-	    return 0;
-	    }
-
-	s=dir;
-	p=s;
-	for (;;p++)
-		{
-		if ((*p == LIST_SEPARATOR_CHAR) || (*p == '\0'))
-			{
-			ss=s;
-			s=p+1;
-			len=(int)(p-ss);
-			if (len == 0) continue;
-			for (j=0; j<ctx->num_dirs; j++)
-				if (strlen(ctx->dirs[j]) == (size_t)len &&
-				    strncmp(ctx->dirs[j],ss,(unsigned int)len) == 0)
-					break;
-			if (j<ctx->num_dirs)
-				continue;
-			if (ctx->num_dirs_alloced < (ctx->num_dirs+1))
-				{
-				ctx->num_dirs_alloced+=10;
-				pp=(char **)OPENSSL_malloc(ctx->num_dirs_alloced*
-					sizeof(char *));
-				ip=(int *)OPENSSL_malloc(ctx->num_dirs_alloced*
-					sizeof(int));
-				if ((pp == NULL) || (ip == NULL))
-					{
-					X509err(X509_F_ADD_CERT_DIR,ERR_R_MALLOC_FAILURE);
-					return(0);
-					}
-				memcpy(pp,ctx->dirs,(ctx->num_dirs_alloced-10)*
-					sizeof(char *));
-				memcpy(ip,ctx->dirs_type,(ctx->num_dirs_alloced-10)*
-					sizeof(int));
-				if (ctx->dirs != NULL)
-					OPENSSL_free(ctx->dirs);
-				if (ctx->dirs_type != NULL)
-					OPENSSL_free(ctx->dirs_type);
-				ctx->dirs=pp;
-				ctx->dirs_type=ip;
-				}
-			ctx->dirs_type[ctx->num_dirs]=type;
-			ctx->dirs[ctx->num_dirs]=(char *)OPENSSL_malloc((unsigned int)len+1);
-			if (ctx->dirs[ctx->num_dirs] == NULL) return(0);
-			strncpy(ctx->dirs[ctx->num_dirs],ss,(unsigned int)len);
-			ctx->dirs[ctx->num_dirs][len]='\0';
-			ctx->num_dirs++;
-			}
-		if (*p == '\0') break;
-		}
-	return(1);
-	}
-
-static int get_cert_by_subject(X509_LOOKUP *xl, int type, X509_NAME *name,
-	     X509_OBJECT *ret)
-	{
-	BY_DIR *ctx;
-	union	{
-		struct	{
-			X509 st_x509;
-			X509_CINF st_x509_cinf;
-			} x509;
-		struct	{
-			X509_CRL st_crl;
-			X509_CRL_INFO st_crl_info;
-			} crl;
-		} data;
-	int ok=0;
-	int i,j,k;
-	unsigned long h;
-	BUF_MEM *b=NULL;
-	struct stat st;
-	X509_OBJECT stmp,*tmp;
-	const char *postfix="";
-
-	if (name == NULL) return(0);
-
-	stmp.type=type;
-	if (type == X509_LU_X509)
-		{
-		data.x509.st_x509.cert_info= &data.x509.st_x509_cinf;
-		data.x509.st_x509_cinf.subject=name;
-		stmp.data.x509= &data.x509.st_x509;
-		postfix="";
-		}
-	else if (type == X509_LU_CRL)
-		{
-		data.crl.st_crl.crl= &data.crl.st_crl_info;
-		data.crl.st_crl_info.issuer=name;
-		stmp.data.crl= &data.crl.st_crl;
-		postfix="r";
-		}
-	else
-		{
-		X509err(X509_F_GET_CERT_BY_SUBJECT,X509_R_WRONG_LOOKUP_TYPE);
-		goto finish;
-		}
-
-	if ((b=BUF_MEM_new()) == NULL)
-		{
-		X509err(X509_F_GET_CERT_BY_SUBJECT,ERR_R_BUF_LIB);
-		goto finish;
-		}
-	
-	ctx=(BY_DIR *)xl->method_data;
-
-	h=X509_NAME_hash(name);
-	for (i=0; i<ctx->num_dirs; i++)
-		{
-		j=strlen(ctx->dirs[i])+1+8+6+1+1;
-		if (!BUF_MEM_grow(b,j))
-			{
-			X509err(X509_F_GET_CERT_BY_SUBJECT,ERR_R_MALLOC_FAILURE);
-			goto finish;
-			}
-		k=0;
-		for (;;)
-			{
-			char c = '/';
-#ifdef OPENSSL_SYS_VMS
-			c = ctx->dirs[i][strlen(ctx->dirs[i])-1];
-			if (c != ':' && c != '>' && c != ']')
-				{
-				/* If no separator is present, we assume the
-				   directory specifier is a logical name, and
-				   add a colon.  We really should use better
-				   VMS routines for merging things like this,
-				   but this will do for now...
-				   -- Richard Levitte */
-				c = ':';
-				}
-			else
-				{
-				c = '\0';
-				}
-#endif
-			if (c == '\0')
-				{
-				/* This is special.  When c == '\0', no
-				   directory separator should be added. */
-				BIO_snprintf(b->data,b->max,
-					"%s%08lx.%s%d",ctx->dirs[i],h,
-					postfix,k);
-				}
-			else
-				{
-				BIO_snprintf(b->data,b->max,
-					"%s%c%08lx.%s%d",ctx->dirs[i],c,h,
-					postfix,k);
-				}
-			k++;
-			if (stat(b->data,&st) < 0)
-				break;
-			/* found one. */
-			if (type == X509_LU_X509)
-				{
-				if ((X509_load_cert_file(xl,b->data,
-					ctx->dirs_type[i])) == 0)
-					break;
-				}
-			else if (type == X509_LU_CRL)
-				{
-				if ((X509_load_crl_file(xl,b->data,
-					ctx->dirs_type[i])) == 0)
-					break;
-				}
-			/* else case will caught higher up */
-			}
-
-		/* we have added it to the cache so now pull
-		 * it out again */
-		CRYPTO_r_lock(CRYPTO_LOCK_X509_STORE);
-		j = sk_X509_OBJECT_find(xl->store_ctx->objs,&stmp);
-		if(j != -1) tmp=sk_X509_OBJECT_value(xl->store_ctx->objs,j);
-		else tmp = NULL;
-		CRYPTO_r_unlock(CRYPTO_LOCK_X509_STORE);
-
-		if (tmp != NULL)
-			{
-			ok=1;
-			ret->type=tmp->type;
-			memcpy(&ret->data,&tmp->data,sizeof(ret->data));
-			/* If we were going to up the reference count,
-			 * we would need to do it on a perl 'type'
-			 * basis */
-	/*		CRYPTO_add(&tmp->data.x509->references,1,
-				CRYPTO_LOCK_X509);*/
-			goto finish;
-			}
-		}
-finish:
-	if (b != NULL) BUF_MEM_free(b);
-	return(ok);
-	}
-
diff --git a/crypto/openssl/crypto/x509/by_file.c b/crypto/openssl/crypto/x509/by_file.c
deleted file mode 100644
index a5e0d4aefa1a..000000000000
--- a/crypto/openssl/crypto/x509/by_file.c
+++ /dev/null
@@ -1,300 +0,0 @@
-/* crypto/x509/by_file.c */
-/* Copyright (C) 1995-1998 Eric Young (eay@cryptsoft.com)
- * All rights reserved.
- *
- * This package is an SSL implementation written
- * by Eric Young (eay@cryptsoft.com).
- * The implementation was written so as to conform with Netscapes SSL.
- * 
- * This library is free for commercial and non-commercial use as long as
- * the following conditions are aheared to.  The following conditions
- * apply to all code found in this distribution, be it the RC4, RSA,
- * lhash, DES, etc., code; not just the SSL code.  The SSL documentation
- * included with this distribution is covered by the same copyright terms
- * except that the holder is Tim Hudson (tjh@cryptsoft.com).
- * 
- * Copyright remains Eric Young's, and as such any Copyright notices in
- * the code are not to be removed.
- * If this package is used in a product, Eric Young should be given attribution
- * as the author of the parts of the library used.
- * This can be in the form of a textual message at program startup or
- * in documentation (online or textual) provided with the package.
- * 
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions
- * are met:
- * 1. Redistributions of source code must retain the copyright
- *    notice, this list of conditions and the following disclaimer.
- * 2. Redistributions in binary form must reproduce the above copyright
- *    notice, this list of conditions and the following disclaimer in the
- *    documentation and/or other materials provided with the distribution.
- * 3. All advertising materials mentioning features or use of this software
- *    must display the following acknowledgement:
- *    "This product includes cryptographic software written by
- *     Eric Young (eay@cryptsoft.com)"
- *    The word 'cryptographic' can be left out if the rouines from the library
- *    being used are not cryptographic related :-).
- * 4. If you include any Windows specific code (or a derivative thereof) from 
- *    the apps directory (application code) you must include an acknowledgement:
- *    "This product includes software written by Tim Hudson (tjh@cryptsoft.com)"
- * 
- * THIS SOFTWARE IS PROVIDED BY ERIC YOUNG ``AS IS'' AND
- * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
- * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
- * ARE DISCLAIMED.  IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE
- * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
- * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
- * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
- * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
- * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
- * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
- * SUCH DAMAGE.
- * 
- * The licence and distribution terms for any publically available version or
- * derivative of this code cannot be changed.  i.e. this code cannot simply be
- * copied and put under another distribution licence
- * [including the GNU Public Licence.]
- */
-
-#include <stdio.h>
-#include <time.h>
-#include <errno.h>
-
-#include "cryptlib.h"
-#include <openssl/lhash.h>
-#include <openssl/buffer.h>
-#include <openssl/x509.h>
-#include <openssl/pem.h>
-
-#ifndef OPENSSL_NO_STDIO
-
-static int by_file_ctrl(X509_LOOKUP *ctx, int cmd, const char *argc,
-	long argl, char **ret);
-X509_LOOKUP_METHOD x509_file_lookup=
-	{
-	"Load file into cache",
-	NULL,		/* new */
-	NULL,		/* free */
-	NULL, 		/* init */
-	NULL,		/* shutdown */
-	by_file_ctrl,	/* ctrl */
-	NULL,		/* get_by_subject */
-	NULL,		/* get_by_issuer_serial */
-	NULL,		/* get_by_fingerprint */
-	NULL,		/* get_by_alias */
-	};
-
-X509_LOOKUP_METHOD *X509_LOOKUP_file(void)
-	{
-	return(&x509_file_lookup);
-	}
-
-static int by_file_ctrl(X509_LOOKUP *ctx, int cmd, const char *argp, long argl,
-	     char **ret)
-	{
-	int ok=0;
-	char *file;
-
-	switch (cmd)
-		{
-	case X509_L_FILE_LOAD:
-		if (argl == X509_FILETYPE_DEFAULT)
-			{
-			file = (char *)Getenv(X509_get_default_cert_file_env());
-			if (file)
-				ok = (X509_load_cert_crl_file(ctx,file,
-					      X509_FILETYPE_PEM) != 0);
-
-			else
-				ok = (X509_load_cert_crl_file(ctx,X509_get_default_cert_file(),
-					      X509_FILETYPE_PEM) != 0);
-
-			if (!ok)
-				{
-				X509err(X509_F_BY_FILE_CTRL,X509_R_LOADING_DEFAULTS);
-				}
-			}
-		else
-			{
-			if(argl == X509_FILETYPE_PEM)
-				ok = (X509_load_cert_crl_file(ctx,argp,
-					X509_FILETYPE_PEM) != 0);
-			else
-				ok = (X509_load_cert_file(ctx,argp,(int)argl) != 0);
-			}
-		break;
-		}
-	return(ok);
-	}
-
-int X509_load_cert_file(X509_LOOKUP *ctx, const char *file, int type)
-	{
-	int ret=0;
-	BIO *in=NULL;
-	int i,count=0;
-	X509 *x=NULL;
-
-	if (file == NULL) return(1);
-	in=BIO_new(BIO_s_file_internal());
-
-	if ((in == NULL) || (BIO_read_filename(in,file) <= 0))
-		{
-		X509err(X509_F_X509_LOAD_CERT_FILE,ERR_R_SYS_LIB);
-		goto err;
-		}
-
-	if (type == X509_FILETYPE_PEM)
-		{
-		for (;;)
-			{
-			x=PEM_read_bio_X509_AUX(in,NULL,NULL,NULL);
-			if (x == NULL)
-				{
-				if ((ERR_GET_REASON(ERR_peek_last_error()) ==
-					PEM_R_NO_START_LINE) && (count > 0))
-					{
-					ERR_clear_error();
-					break;
-					}
-				else
-					{
-					X509err(X509_F_X509_LOAD_CERT_FILE,
-						ERR_R_PEM_LIB);
-					goto err;
-					}
-				}
-			i=X509_STORE_add_cert(ctx->store_ctx,x);
-			if (!i) goto err;
-			count++;
-			X509_free(x);
-			x=NULL;
-			}
-		ret=count;
-		}
-	else if (type == X509_FILETYPE_ASN1)
-		{
-		x=d2i_X509_bio(in,NULL);
-		if (x == NULL)
-			{
-			X509err(X509_F_X509_LOAD_CERT_FILE,ERR_R_ASN1_LIB);
-			goto err;
-			}
-		i=X509_STORE_add_cert(ctx->store_ctx,x);
-		if (!i) goto err;
-		ret=i;
-		}
-	else
-		{
-		X509err(X509_F_X509_LOAD_CERT_FILE,X509_R_BAD_X509_FILETYPE);
-		goto err;
-		}
-err:
-	if (x != NULL) X509_free(x);
-	if (in != NULL) BIO_free(in);
-	return(ret);
-	}
-
-int X509_load_crl_file(X509_LOOKUP *ctx, const char *file, int type)
-	{
-	int ret=0;
-	BIO *in=NULL;
-	int i,count=0;
-	X509_CRL *x=NULL;
-
-	if (file == NULL) return(1);
-	in=BIO_new(BIO_s_file_internal());
-
-	if ((in == NULL) || (BIO_read_filename(in,file) <= 0))
-		{
-		X509err(X509_F_X509_LOAD_CRL_FILE,ERR_R_SYS_LIB);
-		goto err;
-		}
-
-	if (type == X509_FILETYPE_PEM)
-		{
-		for (;;)
-			{
-			x=PEM_read_bio_X509_CRL(in,NULL,NULL,NULL);
-			if (x == NULL)
-				{
-				if ((ERR_GET_REASON(ERR_peek_last_error()) ==
-					PEM_R_NO_START_LINE) && (count > 0))
-					{
-					ERR_clear_error();
-					break;
-					}
-				else
-					{
-					X509err(X509_F_X509_LOAD_CRL_FILE,
-						ERR_R_PEM_LIB);
-					goto err;
-					}
-				}
-			i=X509_STORE_add_crl(ctx->store_ctx,x);
-			if (!i) goto err;
-			count++;
-			X509_CRL_free(x);
-			x=NULL;
-			}
-		ret=count;
-		}
-	else if (type == X509_FILETYPE_ASN1)
-		{
-		x=d2i_X509_CRL_bio(in,NULL);
-		if (x == NULL)
-			{
-			X509err(X509_F_X509_LOAD_CRL_FILE,ERR_R_ASN1_LIB);
-			goto err;
-			}
-		i=X509_STORE_add_crl(ctx->store_ctx,x);
-		if (!i) goto err;
-		ret=i;
-		}
-	else
-		{
-		X509err(X509_F_X509_LOAD_CRL_FILE,X509_R_BAD_X509_FILETYPE);
-		goto err;
-		}
-err:
-	if (x != NULL) X509_CRL_free(x);
-	if (in != NULL) BIO_free(in);
-	return(ret);
-	}
-
-int X509_load_cert_crl_file(X509_LOOKUP *ctx, const char *file, int type)
-{
-	STACK_OF(X509_INFO) *inf;
-	X509_INFO *itmp;
-	BIO *in;
-	int i, count = 0;
-	if(type != X509_FILETYPE_PEM)
-		return X509_load_cert_file(ctx, file, type);
-	in = BIO_new_file(file, "r");
-	if(!in) {
-		X509err(X509_F_X509_LOAD_CERT_CRL_FILE,ERR_R_SYS_LIB);
-		return 0;
-	}
-	inf = PEM_X509_INFO_read_bio(in, NULL, NULL, NULL);
-	BIO_free(in);
-	if(!inf) {
-		X509err(X509_F_X509_LOAD_CERT_CRL_FILE,ERR_R_PEM_LIB);
-		return 0;
-	}
-	for(i = 0; i < sk_X509_INFO_num(inf); i++) {
-		itmp = sk_X509_INFO_value(inf, i);
-		if(itmp->x509) {
-			X509_STORE_add_cert(ctx->store_ctx, itmp->x509);
-			count++;
-		}
-		if(itmp->crl) {
-			X509_STORE_add_crl(ctx->store_ctx, itmp->crl);
-			count++;
-		}
-	}
-	sk_X509_INFO_pop_free(inf, X509_INFO_free);
-	return count;
-}
-
-
-#endif /* OPENSSL_NO_STDIO */
-
diff --git a/crypto/openssl/crypto/x509/x509.h b/crypto/openssl/crypto/x509/x509.h
deleted file mode 100644
index 16a954f70994..000000000000
--- a/crypto/openssl/crypto/x509/x509.h
+++ /dev/null
@@ -1,1344 +0,0 @@
-/* crypto/x509/x509.h */
-/* Copyright (C) 1995-1998 Eric Young (eay@cryptsoft.com)
- * All rights reserved.
- *
- * This package is an SSL implementation written
- * by Eric Young (eay@cryptsoft.com).
- * The implementation was written so as to conform with Netscapes SSL.
- * 
- * This library is free for commercial and non-commercial use as long as
- * the following conditions are aheared to.  The following conditions
- * apply to all code found in this distribution, be it the RC4, RSA,
- * lhash, DES, etc., code; not just the SSL code.  The SSL documentation
- * included with this distribution is covered by the same copyright terms
- * except that the holder is Tim Hudson (tjh@cryptsoft.com).
- * 
- * Copyright remains Eric Young's, and as such any Copyright notices in
- * the code are not to be removed.
- * If this package is used in a product, Eric Young should be given attribution
- * as the author of the parts of the library used.
- * This can be in the form of a textual message at program startup or
- * in documentation (online or textual) provided with the package.
- * 
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions
- * are met:
- * 1. Redistributions of source code must retain the copyright
- *    notice, this list of conditions and the following disclaimer.
- * 2. Redistributions in binary form must reproduce the above copyright
- *    notice, this list of conditions and the following disclaimer in the
- *    documentation and/or other materials provided with the distribution.
- * 3. All advertising materials mentioning features or use of this software
- *    must display the following acknowledgement:
- *    "This product includes cryptographic software written by
- *     Eric Young (eay@cryptsoft.com)"
- *    The word 'cryptographic' can be left out if the rouines from the library
- *    being used are not cryptographic related :-).
- * 4. If you include any Windows specific code (or a derivative thereof) from 
- *    the apps directory (application code) you must include an acknowledgement:
- *    "This product includes software written by Tim Hudson (tjh@cryptsoft.com)"
- * 
- * THIS SOFTWARE IS PROVIDED BY ERIC YOUNG ``AS IS'' AND
- * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
- * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
- * ARE DISCLAIMED.  IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE
- * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
- * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
- * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
- * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
- * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
- * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
- * SUCH DAMAGE.
- * 
- * The licence and distribution terms for any publically available version or
- * derivative of this code cannot be changed.  i.e. this code cannot simply be
- * copied and put under another distribution licence
- * [including the GNU Public Licence.]
- */
-/* ====================================================================
- * Copyright 2002 Sun Microsystems, Inc. ALL RIGHTS RESERVED.
- * ECDH support in OpenSSL originally developed by 
- * SUN MICROSYSTEMS, INC., and contributed to the OpenSSL project.
- */
-
-#ifndef HEADER_X509_H
-#define HEADER_X509_H
-
-#include <openssl/e_os2.h>
-#include <openssl/symhacks.h>
-#ifndef OPENSSL_NO_BUFFER
-#include <openssl/buffer.h>
-#endif
-#ifndef OPENSSL_NO_EVP
-#include <openssl/evp.h>
-#endif
-#ifndef OPENSSL_NO_BIO
-#include <openssl/bio.h>
-#endif
-#include <openssl/stack.h>
-#include <openssl/asn1.h>
-#include <openssl/safestack.h>
-
-#ifndef OPENSSL_NO_EC
-#include <openssl/ec.h>
-#endif
-
-#ifndef OPENSSL_NO_ECDSA
-#include <openssl/ecdsa.h>
-#endif
-
-#ifndef OPENSSL_NO_ECDH
-#include <openssl/ecdh.h>
-#endif
-
-#ifndef OPENSSL_NO_DEPRECATED
-#ifndef OPENSSL_NO_RSA
-#include <openssl/rsa.h>
-#endif
-#ifndef OPENSSL_NO_DSA
-#include <openssl/dsa.h>
-#endif
-#ifndef OPENSSL_NO_DH
-#include <openssl/dh.h>
-#endif
-#endif
-
-#ifndef OPENSSL_NO_SHA
-#include <openssl/sha.h>
-#endif
-#include <openssl/ossl_typ.h>
-
-#ifdef  __cplusplus
-extern "C" {
-#endif
-
-#ifdef OPENSSL_SYS_WIN32
-/* Under Win32 these are defined in wincrypt.h */
-#undef X509_NAME
-#undef X509_CERT_PAIR
-#endif
-
-#define X509_FILETYPE_PEM	1
-#define X509_FILETYPE_ASN1	2
-#define X509_FILETYPE_DEFAULT	3
-
-#define X509v3_KU_DIGITAL_SIGNATURE	0x0080
-#define X509v3_KU_NON_REPUDIATION	0x0040
-#define X509v3_KU_KEY_ENCIPHERMENT	0x0020
-#define X509v3_KU_DATA_ENCIPHERMENT	0x0010
-#define X509v3_KU_KEY_AGREEMENT		0x0008
-#define X509v3_KU_KEY_CERT_SIGN		0x0004
-#define X509v3_KU_CRL_SIGN		0x0002
-#define X509v3_KU_ENCIPHER_ONLY		0x0001
-#define X509v3_KU_DECIPHER_ONLY		0x8000
-#define X509v3_KU_UNDEF			0xffff
-
-typedef struct X509_objects_st
-	{
-	int nid;
-	int (*a2i)(void);
-	int (*i2a)(void);
-	} X509_OBJECTS;
-
-struct X509_algor_st
-	{
-	ASN1_OBJECT *algorithm;
-	ASN1_TYPE *parameter;
-	} /* X509_ALGOR */;
-
-DECLARE_STACK_OF(X509_ALGOR)
-DECLARE_ASN1_SET_OF(X509_ALGOR)
-
-typedef struct X509_val_st
-	{
-	ASN1_TIME *notBefore;
-	ASN1_TIME *notAfter;
-	} X509_VAL;
-
-typedef struct X509_pubkey_st
-	{
-	X509_ALGOR *algor;
-	ASN1_BIT_STRING *public_key;
-	EVP_PKEY *pkey;
-	} X509_PUBKEY;
-
-typedef struct X509_sig_st
-	{
-	X509_ALGOR *algor;
-	ASN1_OCTET_STRING *digest;
-	} X509_SIG;
-
-typedef struct X509_name_entry_st
-	{
-	ASN1_OBJECT *object;
-	ASN1_STRING *value;
-	int set;
-	int size; 	/* temp variable */
-	} X509_NAME_ENTRY;
-
-DECLARE_STACK_OF(X509_NAME_ENTRY)
-DECLARE_ASN1_SET_OF(X509_NAME_ENTRY)
-
-/* we always keep X509_NAMEs in 2 forms. */
-struct X509_name_st
-	{
-	STACK_OF(X509_NAME_ENTRY) *entries;
-	int modified;	/* true if 'bytes' needs to be built */
-#ifndef OPENSSL_NO_BUFFER
-	BUF_MEM *bytes;
-#else
-	char *bytes;
-#endif
-	unsigned long hash; /* Keep the hash around for lookups */
-	} /* X509_NAME */;
-
-DECLARE_STACK_OF(X509_NAME)
-
-#define X509_EX_V_NETSCAPE_HACK		0x8000
-#define X509_EX_V_INIT			0x0001
-typedef struct X509_extension_st
-	{
-	ASN1_OBJECT *object;
-	ASN1_BOOLEAN critical;
-	ASN1_OCTET_STRING *value;
-	} X509_EXTENSION;
-
-DECLARE_STACK_OF(X509_EXTENSION)
-DECLARE_ASN1_SET_OF(X509_EXTENSION)
-
-/* a sequence of these are used */
-typedef struct x509_attributes_st
-	{
-	ASN1_OBJECT *object;
-	int single; /* 0 for a set, 1 for a single item (which is wrong) */
-	union	{
-		char		*ptr;
-/* 0 */		STACK_OF(ASN1_TYPE) *set;
-/* 1 */		ASN1_TYPE	*single;
-		} value;
-	} X509_ATTRIBUTE;
-
-DECLARE_STACK_OF(X509_ATTRIBUTE)
-DECLARE_ASN1_SET_OF(X509_ATTRIBUTE)
-
-
-typedef struct X509_req_info_st
-	{
-	ASN1_ENCODING enc;
-	ASN1_INTEGER *version;
-	X509_NAME *subject;
-	X509_PUBKEY *pubkey;
-	/*  d=2 hl=2 l=  0 cons: cont: 00 */
-	STACK_OF(X509_ATTRIBUTE) *attributes; /* [ 0 ] */
-	} X509_REQ_INFO;
-
-typedef struct X509_req_st
-	{
-	X509_REQ_INFO *req_info;
-	X509_ALGOR *sig_alg;
-	ASN1_BIT_STRING *signature;
-	int references;
-	} X509_REQ;
-
-typedef struct x509_cinf_st
-	{
-	ASN1_INTEGER *version;		/* [ 0 ] default of v1 */
-	ASN1_INTEGER *serialNumber;
-	X509_ALGOR *signature;
-	X509_NAME *issuer;
-	X509_VAL *validity;
-	X509_NAME *subject;
-	X509_PUBKEY *key;
-	ASN1_BIT_STRING *issuerUID;		/* [ 1 ] optional in v2 */
-	ASN1_BIT_STRING *subjectUID;		/* [ 2 ] optional in v2 */
-	STACK_OF(X509_EXTENSION) *extensions;	/* [ 3 ] optional in v3 */
-	} X509_CINF;
-
-/* This stuff is certificate "auxiliary info"
- * it contains details which are useful in certificate
- * stores and databases. When used this is tagged onto
- * the end of the certificate itself
- */
-
-typedef struct x509_cert_aux_st
-	{
-	STACK_OF(ASN1_OBJECT) *trust;		/* trusted uses */
-	STACK_OF(ASN1_OBJECT) *reject;		/* rejected uses */
-	ASN1_UTF8STRING *alias;			/* "friendly name" */
-	ASN1_OCTET_STRING *keyid;		/* key id of private key */
-	STACK_OF(X509_ALGOR) *other;		/* other unspecified info */
-	} X509_CERT_AUX;
-
-struct x509_st
-	{
-	X509_CINF *cert_info;
-	X509_ALGOR *sig_alg;
-	ASN1_BIT_STRING *signature;
-	int valid;
-	int references;
-	char *name;
-	CRYPTO_EX_DATA ex_data;
-	/* These contain copies of various extension values */
-	long ex_pathlen;
-	long ex_pcpathlen;
-	unsigned long ex_flags;
-	unsigned long ex_kusage;
-	unsigned long ex_xkusage;
-	unsigned long ex_nscert;
-	ASN1_OCTET_STRING *skid;
-	struct AUTHORITY_KEYID_st *akid;
-	X509_POLICY_CACHE *policy_cache;
-#ifndef OPENSSL_NO_RFC3779
-	STACK_OF(IPAddressFamily) *rfc3779_addr;
-	struct ASIdentifiers_st *rfc3779_asid;
-#endif
-#ifndef OPENSSL_NO_SHA
-	unsigned char sha1_hash[SHA_DIGEST_LENGTH];
-#endif
-	X509_CERT_AUX *aux;
-	} /* X509 */;
-
-DECLARE_STACK_OF(X509)
-DECLARE_ASN1_SET_OF(X509)
-
-/* This is used for a table of trust checking functions */
-
-typedef struct x509_trust_st {
-	int trust;
-	int flags;
-	int (*check_trust)(struct x509_trust_st *, X509 *, int);
-	char *name;
-	int arg1;
-	void *arg2;
-} X509_TRUST;
-
-DECLARE_STACK_OF(X509_TRUST)
-
-typedef struct x509_cert_pair_st {
-	X509 *forward;
-	X509 *reverse;
-} X509_CERT_PAIR;
-
-/* standard trust ids */
-
-#define X509_TRUST_DEFAULT	-1	/* Only valid in purpose settings */
-
-#define X509_TRUST_COMPAT	1
-#define X509_TRUST_SSL_CLIENT	2
-#define X509_TRUST_SSL_SERVER	3
-#define X509_TRUST_EMAIL	4
-#define X509_TRUST_OBJECT_SIGN	5
-#define X509_TRUST_OCSP_SIGN	6
-#define X509_TRUST_OCSP_REQUEST	7
-
-/* Keep these up to date! */
-#define X509_TRUST_MIN		1
-#define X509_TRUST_MAX		7
-
-
-/* trust_flags values */
-#define	X509_TRUST_DYNAMIC 	1
-#define	X509_TRUST_DYNAMIC_NAME	2
-
-/* check_trust return codes */
-
-#define X509_TRUST_TRUSTED	1
-#define X509_TRUST_REJECTED	2
-#define X509_TRUST_UNTRUSTED	3
-
-/* Flags for X509_print_ex() */
-
-#define	X509_FLAG_COMPAT		0
-#define	X509_FLAG_NO_HEADER		1L
-#define	X509_FLAG_NO_VERSION		(1L << 1)
-#define	X509_FLAG_NO_SERIAL		(1L << 2)
-#define	X509_FLAG_NO_SIGNAME		(1L << 3)
-#define	X509_FLAG_NO_ISSUER		(1L << 4)
-#define	X509_FLAG_NO_VALIDITY		(1L << 5)
-#define	X509_FLAG_NO_SUBJECT		(1L << 6)
-#define	X509_FLAG_NO_PUBKEY		(1L << 7)
-#define	X509_FLAG_NO_EXTENSIONS		(1L << 8)
-#define	X509_FLAG_NO_SIGDUMP		(1L << 9)
-#define	X509_FLAG_NO_AUX		(1L << 10)
-#define	X509_FLAG_NO_ATTRIBUTES		(1L << 11)
-
-/* Flags specific to X509_NAME_print_ex() */	
-
-/* The field separator information */
-
-#define XN_FLAG_SEP_MASK	(0xf << 16)
-
-#define XN_FLAG_COMPAT		0		/* Traditional SSLeay: use old X509_NAME_print */
-#define XN_FLAG_SEP_COMMA_PLUS	(1 << 16)	/* RFC2253 ,+ */
-#define XN_FLAG_SEP_CPLUS_SPC	(2 << 16)	/* ,+ spaced: more readable */
-#define XN_FLAG_SEP_SPLUS_SPC	(3 << 16)	/* ;+ spaced */
-#define XN_FLAG_SEP_MULTILINE	(4 << 16)	/* One line per field */
-
-#define XN_FLAG_DN_REV		(1 << 20)	/* Reverse DN order */
-
-/* How the field name is shown */
-
-#define XN_FLAG_FN_MASK		(0x3 << 21)
-
-#define XN_FLAG_FN_SN		0		/* Object short name */
-#define XN_FLAG_FN_LN		(1 << 21)	/* Object long name */
-#define XN_FLAG_FN_OID		(2 << 21)	/* Always use OIDs */
-#define XN_FLAG_FN_NONE		(3 << 21)	/* No field names */
-
-#define XN_FLAG_SPC_EQ		(1 << 23)	/* Put spaces round '=' */
-
-/* This determines if we dump fields we don't recognise:
- * RFC2253 requires this.
- */
-
-#define XN_FLAG_DUMP_UNKNOWN_FIELDS (1 << 24)
-
-#define XN_FLAG_FN_ALIGN	(1 << 25)	/* Align field names to 20 characters */
-
-/* Complete set of RFC2253 flags */
-
-#define XN_FLAG_RFC2253 (ASN1_STRFLGS_RFC2253 | \
-			XN_FLAG_SEP_COMMA_PLUS | \
-			XN_FLAG_DN_REV | \
-			XN_FLAG_FN_SN | \
-			XN_FLAG_DUMP_UNKNOWN_FIELDS)
-
-/* readable oneline form */
-
-#define XN_FLAG_ONELINE (ASN1_STRFLGS_RFC2253 | \
-			ASN1_STRFLGS_ESC_QUOTE | \
-			XN_FLAG_SEP_CPLUS_SPC | \
-			XN_FLAG_SPC_EQ | \
-			XN_FLAG_FN_SN)
-
-/* readable multiline form */
-
-#define XN_FLAG_MULTILINE (ASN1_STRFLGS_ESC_CTRL | \
-			ASN1_STRFLGS_ESC_MSB | \
-			XN_FLAG_SEP_MULTILINE | \
-			XN_FLAG_SPC_EQ | \
-			XN_FLAG_FN_LN | \
-			XN_FLAG_FN_ALIGN)
-
-typedef struct X509_revoked_st
-	{
-	ASN1_INTEGER *serialNumber;
-	ASN1_TIME *revocationDate;
-	STACK_OF(X509_EXTENSION) /* optional */ *extensions;
-	int sequence; /* load sequence */
-	} X509_REVOKED;
-
-DECLARE_STACK_OF(X509_REVOKED)
-DECLARE_ASN1_SET_OF(X509_REVOKED)
-
-typedef struct X509_crl_info_st
-	{
-	ASN1_INTEGER *version;
-	X509_ALGOR *sig_alg;
-	X509_NAME *issuer;
-	ASN1_TIME *lastUpdate;
-	ASN1_TIME *nextUpdate;
-	STACK_OF(X509_REVOKED) *revoked;
-	STACK_OF(X509_EXTENSION) /* [0] */ *extensions;
-	ASN1_ENCODING enc;
-	} X509_CRL_INFO;
-
-struct X509_crl_st
-	{
-	/* actual signature */
-	X509_CRL_INFO *crl;
-	X509_ALGOR *sig_alg;
-	ASN1_BIT_STRING *signature;
-	int references;
-	} /* X509_CRL */;
-
-DECLARE_STACK_OF(X509_CRL)
-DECLARE_ASN1_SET_OF(X509_CRL)
-
-typedef struct private_key_st
-	{
-	int version;
-	/* The PKCS#8 data types */
-	X509_ALGOR *enc_algor;
-	ASN1_OCTET_STRING *enc_pkey;	/* encrypted pub key */
-
-	/* When decrypted, the following will not be NULL */
-	EVP_PKEY *dec_pkey;
-
-	/* used to encrypt and decrypt */
-	int key_length;
-	char *key_data;
-	int key_free;	/* true if we should auto free key_data */
-
-	/* expanded version of 'enc_algor' */
-	EVP_CIPHER_INFO cipher;
-
-	int references;
-	} X509_PKEY;
-
-#ifndef OPENSSL_NO_EVP
-typedef struct X509_info_st
-	{
-	X509 *x509;
-	X509_CRL *crl;
-	X509_PKEY *x_pkey;
-
-	EVP_CIPHER_INFO enc_cipher;
-	int enc_len;
-	char *enc_data;
-
-	int references;
-	} X509_INFO;
-
-DECLARE_STACK_OF(X509_INFO)
-#endif
-
-/* The next 2 structures and their 8 routines were sent to me by
- * Pat Richard <patr@x509.com> and are used to manipulate
- * Netscapes spki structures - useful if you are writing a CA web page
- */
-typedef struct Netscape_spkac_st
-	{
-	X509_PUBKEY *pubkey;
-	ASN1_IA5STRING *challenge;	/* challenge sent in atlas >= PR2 */
-	} NETSCAPE_SPKAC;
-
-typedef struct Netscape_spki_st
-	{
-	NETSCAPE_SPKAC *spkac;	/* signed public key and challenge */
-	X509_ALGOR *sig_algor;
-	ASN1_BIT_STRING *signature;
-	} NETSCAPE_SPKI;
-
-/* Netscape certificate sequence structure */
-typedef struct Netscape_certificate_sequence
-	{
-	ASN1_OBJECT *type;
-	STACK_OF(X509) *certs;
-	} NETSCAPE_CERT_SEQUENCE;
-
-/* Unused (and iv length is wrong)
-typedef struct CBCParameter_st
-	{
-	unsigned char iv[8];
-	} CBC_PARAM;
-*/
-
-/* Password based encryption structure */
-
-typedef struct PBEPARAM_st {
-ASN1_OCTET_STRING *salt;
-ASN1_INTEGER *iter;
-} PBEPARAM;
-
-/* Password based encryption V2 structures */
-
-typedef struct PBE2PARAM_st {
-X509_ALGOR *keyfunc;
-X509_ALGOR *encryption;
-} PBE2PARAM;
-
-typedef struct PBKDF2PARAM_st {
-ASN1_TYPE *salt;	/* Usually OCTET STRING but could be anything */
-ASN1_INTEGER *iter;
-ASN1_INTEGER *keylength;
-X509_ALGOR *prf;
-} PBKDF2PARAM;
-
-
-/* PKCS#8 private key info structure */
-
-typedef struct pkcs8_priv_key_info_st
-        {
-        int broken;     /* Flag for various broken formats */
-#define PKCS8_OK		0
-#define PKCS8_NO_OCTET		1
-#define PKCS8_EMBEDDED_PARAM	2
-#define PKCS8_NS_DB		3
-        ASN1_INTEGER *version;
-        X509_ALGOR *pkeyalg;
-        ASN1_TYPE *pkey; /* Should be OCTET STRING but some are broken */
-        STACK_OF(X509_ATTRIBUTE) *attributes;
-        } PKCS8_PRIV_KEY_INFO;
-
-#ifdef  __cplusplus
-}
-#endif
-
-#include <openssl/x509_vfy.h>
-#include <openssl/pkcs7.h>
-
-#ifdef  __cplusplus
-extern "C" {
-#endif
-
-#ifdef SSLEAY_MACROS
-#define X509_verify(a,r) ASN1_verify((int (*)())i2d_X509_CINF,a->sig_alg,\
-	a->signature,(char *)a->cert_info,r)
-#define X509_REQ_verify(a,r) ASN1_verify((int (*)())i2d_X509_REQ_INFO, \
-	a->sig_alg,a->signature,(char *)a->req_info,r)
-#define X509_CRL_verify(a,r) ASN1_verify((int (*)())i2d_X509_CRL_INFO, \
-	a->sig_alg, a->signature,(char *)a->crl,r)
-
-#define X509_sign(x,pkey,md) \
-	ASN1_sign((int (*)())i2d_X509_CINF, x->cert_info->signature, \
-		x->sig_alg, x->signature, (char *)x->cert_info,pkey,md)
-#define X509_REQ_sign(x,pkey,md) \
-	ASN1_sign((int (*)())i2d_X509_REQ_INFO,x->sig_alg, NULL, \
-		x->signature, (char *)x->req_info,pkey,md)
-#define X509_CRL_sign(x,pkey,md) \
-	ASN1_sign((int (*)())i2d_X509_CRL_INFO,x->crl->sig_alg,x->sig_alg, \
-		x->signature, (char *)x->crl,pkey,md)
-#define NETSCAPE_SPKI_sign(x,pkey,md) \
-	ASN1_sign((int (*)())i2d_NETSCAPE_SPKAC, x->sig_algor,NULL, \
-		x->signature, (char *)x->spkac,pkey,md)
-
-#define X509_dup(x509) (X509 *)ASN1_dup((int (*)())i2d_X509, \
-		(char *(*)())d2i_X509,(char *)x509)
-#define X509_ATTRIBUTE_dup(xa) (X509_ATTRIBUTE *)ASN1_dup(\
-		(int (*)())i2d_X509_ATTRIBUTE, \
-		(char *(*)())d2i_X509_ATTRIBUTE,(char *)xa)
-#define X509_EXTENSION_dup(ex) (X509_EXTENSION *)ASN1_dup( \
-		(int (*)())i2d_X509_EXTENSION, \
-		(char *(*)())d2i_X509_EXTENSION,(char *)ex)
-#define d2i_X509_fp(fp,x509) (X509 *)ASN1_d2i_fp((char *(*)())X509_new, \
-		(char *(*)())d2i_X509, (fp),(unsigned char **)(x509))
-#define i2d_X509_fp(fp,x509) ASN1_i2d_fp(i2d_X509,fp,(unsigned char *)x509)
-#define d2i_X509_bio(bp,x509) (X509 *)ASN1_d2i_bio((char *(*)())X509_new, \
-		(char *(*)())d2i_X509, (bp),(unsigned char **)(x509))
-#define i2d_X509_bio(bp,x509) ASN1_i2d_bio(i2d_X509,bp,(unsigned char *)x509)
-
-#define X509_CRL_dup(crl) (X509_CRL *)ASN1_dup((int (*)())i2d_X509_CRL, \
-		(char *(*)())d2i_X509_CRL,(char *)crl)
-#define d2i_X509_CRL_fp(fp,crl) (X509_CRL *)ASN1_d2i_fp((char *(*)()) \
-		X509_CRL_new,(char *(*)())d2i_X509_CRL, (fp),\
-		(unsigned char **)(crl))
-#define i2d_X509_CRL_fp(fp,crl) ASN1_i2d_fp(i2d_X509_CRL,fp,\
-		(unsigned char *)crl)
-#define d2i_X509_CRL_bio(bp,crl) (X509_CRL *)ASN1_d2i_bio((char *(*)()) \
-		X509_CRL_new,(char *(*)())d2i_X509_CRL, (bp),\
-		(unsigned char **)(crl))
-#define i2d_X509_CRL_bio(bp,crl) ASN1_i2d_bio(i2d_X509_CRL,bp,\
-		(unsigned char *)crl)
-
-#define PKCS7_dup(p7) (PKCS7 *)ASN1_dup((int (*)())i2d_PKCS7, \
-		(char *(*)())d2i_PKCS7,(char *)p7)
-#define d2i_PKCS7_fp(fp,p7) (PKCS7 *)ASN1_d2i_fp((char *(*)()) \
-		PKCS7_new,(char *(*)())d2i_PKCS7, (fp),\
-		(unsigned char **)(p7))
-#define i2d_PKCS7_fp(fp,p7) ASN1_i2d_fp(i2d_PKCS7,fp,\
-		(unsigned char *)p7)
-#define d2i_PKCS7_bio(bp,p7) (PKCS7 *)ASN1_d2i_bio((char *(*)()) \
-		PKCS7_new,(char *(*)())d2i_PKCS7, (bp),\
-		(unsigned char **)(p7))
-#define i2d_PKCS7_bio(bp,p7) ASN1_i2d_bio(i2d_PKCS7,bp,\
-		(unsigned char *)p7)
-
-#define X509_REQ_dup(req) (X509_REQ *)ASN1_dup((int (*)())i2d_X509_REQ, \
-		(char *(*)())d2i_X509_REQ,(char *)req)
-#define d2i_X509_REQ_fp(fp,req) (X509_REQ *)ASN1_d2i_fp((char *(*)())\
-		X509_REQ_new, (char *(*)())d2i_X509_REQ, (fp),\
-		(unsigned char **)(req))
-#define i2d_X509_REQ_fp(fp,req) ASN1_i2d_fp(i2d_X509_REQ,fp,\
-		(unsigned char *)req)
-#define d2i_X509_REQ_bio(bp,req) (X509_REQ *)ASN1_d2i_bio((char *(*)())\
-		X509_REQ_new, (char *(*)())d2i_X509_REQ, (bp),\
-		(unsigned char **)(req))
-#define i2d_X509_REQ_bio(bp,req) ASN1_i2d_bio(i2d_X509_REQ,bp,\
-		(unsigned char *)req)
-
-#define RSAPublicKey_dup(rsa) (RSA *)ASN1_dup((int (*)())i2d_RSAPublicKey, \
-		(char *(*)())d2i_RSAPublicKey,(char *)rsa)
-#define RSAPrivateKey_dup(rsa) (RSA *)ASN1_dup((int (*)())i2d_RSAPrivateKey, \
-		(char *(*)())d2i_RSAPrivateKey,(char *)rsa)
-
-#define d2i_RSAPrivateKey_fp(fp,rsa) (RSA *)ASN1_d2i_fp((char *(*)())\
-		RSA_new,(char *(*)())d2i_RSAPrivateKey, (fp), \
-		(unsigned char **)(rsa))
-#define i2d_RSAPrivateKey_fp(fp,rsa) ASN1_i2d_fp(i2d_RSAPrivateKey,fp, \
-		(unsigned char *)rsa)
-#define d2i_RSAPrivateKey_bio(bp,rsa) (RSA *)ASN1_d2i_bio((char *(*)())\
-		RSA_new,(char *(*)())d2i_RSAPrivateKey, (bp), \
-		(unsigned char **)(rsa))
-#define i2d_RSAPrivateKey_bio(bp,rsa) ASN1_i2d_bio(i2d_RSAPrivateKey,bp, \
-		(unsigned char *)rsa)
-
-#define d2i_RSAPublicKey_fp(fp,rsa) (RSA *)ASN1_d2i_fp((char *(*)())\
-		RSA_new,(char *(*)())d2i_RSAPublicKey, (fp), \
-		(unsigned char **)(rsa))
-#define i2d_RSAPublicKey_fp(fp,rsa) ASN1_i2d_fp(i2d_RSAPublicKey,fp, \
-		(unsigned char *)rsa)
-#define d2i_RSAPublicKey_bio(bp,rsa) (RSA *)ASN1_d2i_bio((char *(*)())\
-		RSA_new,(char *(*)())d2i_RSAPublicKey, (bp), \
-		(unsigned char **)(rsa))
-#define i2d_RSAPublicKey_bio(bp,rsa) ASN1_i2d_bio(i2d_RSAPublicKey,bp, \
-		(unsigned char *)rsa)
-
-#define d2i_DSAPrivateKey_fp(fp,dsa) (DSA *)ASN1_d2i_fp((char *(*)())\
-		DSA_new,(char *(*)())d2i_DSAPrivateKey, (fp), \
-		(unsigned char **)(dsa))
-#define i2d_DSAPrivateKey_fp(fp,dsa) ASN1_i2d_fp(i2d_DSAPrivateKey,fp, \
-		(unsigned char *)dsa)
-#define d2i_DSAPrivateKey_bio(bp,dsa) (DSA *)ASN1_d2i_bio((char *(*)())\
-		DSA_new,(char *(*)())d2i_DSAPrivateKey, (bp), \
-		(unsigned char **)(dsa))
-#define i2d_DSAPrivateKey_bio(bp,dsa) ASN1_i2d_bio(i2d_DSAPrivateKey,bp, \
-		(unsigned char *)dsa)
-
-#define d2i_ECPrivateKey_fp(fp,ecdsa) (EC_KEY *)ASN1_d2i_fp((char *(*)())\
-		EC_KEY_new,(char *(*)())d2i_ECPrivateKey, (fp), \
-		(unsigned char **)(ecdsa))
-#define i2d_ECPrivateKey_fp(fp,ecdsa) ASN1_i2d_fp(i2d_ECPrivateKey,fp, \
-		(unsigned char *)ecdsa)
-#define d2i_ECPrivateKey_bio(bp,ecdsa) (EC_KEY *)ASN1_d2i_bio((char *(*)())\
-		EC_KEY_new,(char *(*)())d2i_ECPrivateKey, (bp), \
-		(unsigned char **)(ecdsa))
-#define i2d_ECPrivateKey_bio(bp,ecdsa) ASN1_i2d_bio(i2d_ECPrivateKey,bp, \
-		(unsigned char *)ecdsa)
-
-#define X509_ALGOR_dup(xn) (X509_ALGOR *)ASN1_dup((int (*)())i2d_X509_ALGOR,\
-		(char *(*)())d2i_X509_ALGOR,(char *)xn)
-
-#define X509_NAME_dup(xn) (X509_NAME *)ASN1_dup((int (*)())i2d_X509_NAME, \
-		(char *(*)())d2i_X509_NAME,(char *)xn)
-#define X509_NAME_ENTRY_dup(ne) (X509_NAME_ENTRY *)ASN1_dup( \
-		(int (*)())i2d_X509_NAME_ENTRY, \
-		(char *(*)())d2i_X509_NAME_ENTRY,\
-		(char *)ne)
-
-#define X509_digest(data,type,md,len) \
-	ASN1_digest((int (*)())i2d_X509,type,(char *)data,md,len)
-#define X509_NAME_digest(data,type,md,len) \
-	ASN1_digest((int (*)())i2d_X509_NAME,type,(char *)data,md,len)
-#ifndef PKCS7_ISSUER_AND_SERIAL_digest
-#define PKCS7_ISSUER_AND_SERIAL_digest(data,type,md,len) \
-	ASN1_digest((int (*)())i2d_PKCS7_ISSUER_AND_SERIAL,type,\
-		(char *)data,md,len)
-#endif
-#endif
-
-#define X509_EXT_PACK_UNKNOWN	1
-#define X509_EXT_PACK_STRING	2
-
-#define		X509_get_version(x) ASN1_INTEGER_get((x)->cert_info->version)
-/* #define	X509_get_serialNumber(x) ((x)->cert_info->serialNumber) */
-#define		X509_get_notBefore(x) ((x)->cert_info->validity->notBefore)
-#define		X509_get_notAfter(x) ((x)->cert_info->validity->notAfter)
-#define		X509_extract_key(x)	X509_get_pubkey(x) /*****/
-#define		X509_REQ_get_version(x) ASN1_INTEGER_get((x)->req_info->version)
-#define		X509_REQ_get_subject_name(x) ((x)->req_info->subject)
-#define		X509_REQ_extract_key(a)	X509_REQ_get_pubkey(a)
-#define		X509_name_cmp(a,b)	X509_NAME_cmp((a),(b))
-#define		X509_get_signature_type(x) EVP_PKEY_type(OBJ_obj2nid((x)->sig_alg->algorithm))
-
-#define		X509_CRL_get_version(x) ASN1_INTEGER_get((x)->crl->version)
-#define 	X509_CRL_get_lastUpdate(x) ((x)->crl->lastUpdate)
-#define 	X509_CRL_get_nextUpdate(x) ((x)->crl->nextUpdate)
-#define		X509_CRL_get_issuer(x) ((x)->crl->issuer)
-#define		X509_CRL_get_REVOKED(x) ((x)->crl->revoked)
-
-/* This one is only used so that a binary form can output, as in
- * i2d_X509_NAME(X509_get_X509_PUBKEY(x),&buf) */
-#define 	X509_get_X509_PUBKEY(x) ((x)->cert_info->key)
-
-
-const char *X509_verify_cert_error_string(long n);
-
-#ifndef SSLEAY_MACROS
-#ifndef OPENSSL_NO_EVP
-int X509_verify(X509 *a, EVP_PKEY *r);
-
-int X509_REQ_verify(X509_REQ *a, EVP_PKEY *r);
-int X509_CRL_verify(X509_CRL *a, EVP_PKEY *r);
-int NETSCAPE_SPKI_verify(NETSCAPE_SPKI *a, EVP_PKEY *r);
-
-NETSCAPE_SPKI * NETSCAPE_SPKI_b64_decode(const char *str, int len);
-char * NETSCAPE_SPKI_b64_encode(NETSCAPE_SPKI *x);
-EVP_PKEY *NETSCAPE_SPKI_get_pubkey(NETSCAPE_SPKI *x);
-int NETSCAPE_SPKI_set_pubkey(NETSCAPE_SPKI *x, EVP_PKEY *pkey);
-
-int NETSCAPE_SPKI_print(BIO *out, NETSCAPE_SPKI *spki);
-
-int X509_signature_print(BIO *bp,X509_ALGOR *alg, ASN1_STRING *sig);
-
-int X509_sign(X509 *x, EVP_PKEY *pkey, const EVP_MD *md);
-int X509_REQ_sign(X509_REQ *x, EVP_PKEY *pkey, const EVP_MD *md);
-int X509_CRL_sign(X509_CRL *x, EVP_PKEY *pkey, const EVP_MD *md);
-int NETSCAPE_SPKI_sign(NETSCAPE_SPKI *x, EVP_PKEY *pkey, const EVP_MD *md);
-
-int X509_pubkey_digest(const X509 *data,const EVP_MD *type,
-		unsigned char *md, unsigned int *len);
-int X509_digest(const X509 *data,const EVP_MD *type,
-		unsigned char *md, unsigned int *len);
-int X509_CRL_digest(const X509_CRL *data,const EVP_MD *type,
-		unsigned char *md, unsigned int *len);
-int X509_REQ_digest(const X509_REQ *data,const EVP_MD *type,
-		unsigned char *md, unsigned int *len);
-int X509_NAME_digest(const X509_NAME *data,const EVP_MD *type,
-		unsigned char *md, unsigned int *len);
-#endif
-
-#ifndef OPENSSL_NO_FP_API
-X509 *d2i_X509_fp(FILE *fp, X509 **x509);
-int i2d_X509_fp(FILE *fp,X509 *x509);
-X509_CRL *d2i_X509_CRL_fp(FILE *fp,X509_CRL **crl);
-int i2d_X509_CRL_fp(FILE *fp,X509_CRL *crl);
-X509_REQ *d2i_X509_REQ_fp(FILE *fp,X509_REQ **req);
-int i2d_X509_REQ_fp(FILE *fp,X509_REQ *req);
-#ifndef OPENSSL_NO_RSA
-RSA *d2i_RSAPrivateKey_fp(FILE *fp,RSA **rsa);
-int i2d_RSAPrivateKey_fp(FILE *fp,RSA *rsa);
-RSA *d2i_RSAPublicKey_fp(FILE *fp,RSA **rsa);
-int i2d_RSAPublicKey_fp(FILE *fp,RSA *rsa);
-RSA *d2i_RSA_PUBKEY_fp(FILE *fp,RSA **rsa);
-int i2d_RSA_PUBKEY_fp(FILE *fp,RSA *rsa);
-#endif
-#ifndef OPENSSL_NO_DSA
-DSA *d2i_DSA_PUBKEY_fp(FILE *fp, DSA **dsa);
-int i2d_DSA_PUBKEY_fp(FILE *fp, DSA *dsa);
-DSA *d2i_DSAPrivateKey_fp(FILE *fp, DSA **dsa);
-int i2d_DSAPrivateKey_fp(FILE *fp, DSA *dsa);
-#endif
-#ifndef OPENSSL_NO_EC
-EC_KEY *d2i_EC_PUBKEY_fp(FILE *fp, EC_KEY **eckey);
-int   i2d_EC_PUBKEY_fp(FILE *fp, EC_KEY *eckey);
-EC_KEY *d2i_ECPrivateKey_fp(FILE *fp, EC_KEY **eckey);
-int   i2d_ECPrivateKey_fp(FILE *fp, EC_KEY *eckey);
-#endif
-X509_SIG *d2i_PKCS8_fp(FILE *fp,X509_SIG **p8);
-int i2d_PKCS8_fp(FILE *fp,X509_SIG *p8);
-PKCS8_PRIV_KEY_INFO *d2i_PKCS8_PRIV_KEY_INFO_fp(FILE *fp,
-						PKCS8_PRIV_KEY_INFO **p8inf);
-int i2d_PKCS8_PRIV_KEY_INFO_fp(FILE *fp,PKCS8_PRIV_KEY_INFO *p8inf);
-int i2d_PKCS8PrivateKeyInfo_fp(FILE *fp, EVP_PKEY *key);
-int i2d_PrivateKey_fp(FILE *fp, EVP_PKEY *pkey);
-EVP_PKEY *d2i_PrivateKey_fp(FILE *fp, EVP_PKEY **a);
-int i2d_PUBKEY_fp(FILE *fp, EVP_PKEY *pkey);
-EVP_PKEY *d2i_PUBKEY_fp(FILE *fp, EVP_PKEY **a);
-#endif
-
-#ifndef OPENSSL_NO_BIO
-X509 *d2i_X509_bio(BIO *bp,X509 **x509);
-int i2d_X509_bio(BIO *bp,X509 *x509);
-X509_CRL *d2i_X509_CRL_bio(BIO *bp,X509_CRL **crl);
-int i2d_X509_CRL_bio(BIO *bp,X509_CRL *crl);
-X509_REQ *d2i_X509_REQ_bio(BIO *bp,X509_REQ **req);
-int i2d_X509_REQ_bio(BIO *bp,X509_REQ *req);
-#ifndef OPENSSL_NO_RSA
-RSA *d2i_RSAPrivateKey_bio(BIO *bp,RSA **rsa);
-int i2d_RSAPrivateKey_bio(BIO *bp,RSA *rsa);
-RSA *d2i_RSAPublicKey_bio(BIO *bp,RSA **rsa);
-int i2d_RSAPublicKey_bio(BIO *bp,RSA *rsa);
-RSA *d2i_RSA_PUBKEY_bio(BIO *bp,RSA **rsa);
-int i2d_RSA_PUBKEY_bio(BIO *bp,RSA *rsa);
-#endif
-#ifndef OPENSSL_NO_DSA
-DSA *d2i_DSA_PUBKEY_bio(BIO *bp, DSA **dsa);
-int i2d_DSA_PUBKEY_bio(BIO *bp, DSA *dsa);
-DSA *d2i_DSAPrivateKey_bio(BIO *bp, DSA **dsa);
-int i2d_DSAPrivateKey_bio(BIO *bp, DSA *dsa);
-#endif
-#ifndef OPENSSL_NO_EC
-EC_KEY *d2i_EC_PUBKEY_bio(BIO *bp, EC_KEY **eckey);
-int   i2d_EC_PUBKEY_bio(BIO *bp, EC_KEY *eckey);
-EC_KEY *d2i_ECPrivateKey_bio(BIO *bp, EC_KEY **eckey);
-int   i2d_ECPrivateKey_bio(BIO *bp, EC_KEY *eckey);
-#endif
-X509_SIG *d2i_PKCS8_bio(BIO *bp,X509_SIG **p8);
-int i2d_PKCS8_bio(BIO *bp,X509_SIG *p8);
-PKCS8_PRIV_KEY_INFO *d2i_PKCS8_PRIV_KEY_INFO_bio(BIO *bp,
-						PKCS8_PRIV_KEY_INFO **p8inf);
-int i2d_PKCS8_PRIV_KEY_INFO_bio(BIO *bp,PKCS8_PRIV_KEY_INFO *p8inf);
-int i2d_PKCS8PrivateKeyInfo_bio(BIO *bp, EVP_PKEY *key);
-int i2d_PrivateKey_bio(BIO *bp, EVP_PKEY *pkey);
-EVP_PKEY *d2i_PrivateKey_bio(BIO *bp, EVP_PKEY **a);
-int i2d_PUBKEY_bio(BIO *bp, EVP_PKEY *pkey);
-EVP_PKEY *d2i_PUBKEY_bio(BIO *bp, EVP_PKEY **a);
-#endif
-
-X509 *X509_dup(X509 *x509);
-X509_ATTRIBUTE *X509_ATTRIBUTE_dup(X509_ATTRIBUTE *xa);
-X509_EXTENSION *X509_EXTENSION_dup(X509_EXTENSION *ex);
-X509_CRL *X509_CRL_dup(X509_CRL *crl);
-X509_REQ *X509_REQ_dup(X509_REQ *req);
-X509_ALGOR *X509_ALGOR_dup(X509_ALGOR *xn);
-X509_NAME *X509_NAME_dup(X509_NAME *xn);
-X509_NAME_ENTRY *X509_NAME_ENTRY_dup(X509_NAME_ENTRY *ne);
-
-#endif /* !SSLEAY_MACROS */
-
-int		X509_cmp_time(ASN1_TIME *s, time_t *t);
-int		X509_cmp_current_time(ASN1_TIME *s);
-ASN1_TIME *	X509_time_adj(ASN1_TIME *s, long adj, time_t *t);
-ASN1_TIME *	X509_gmtime_adj(ASN1_TIME *s, long adj);
-
-const char *	X509_get_default_cert_area(void );
-const char *	X509_get_default_cert_dir(void );
-const char *	X509_get_default_cert_file(void );
-const char *	X509_get_default_cert_dir_env(void );
-const char *	X509_get_default_cert_file_env(void );
-const char *	X509_get_default_private_dir(void );
-
-X509_REQ *	X509_to_X509_REQ(X509 *x, EVP_PKEY *pkey, const EVP_MD *md);
-X509 *		X509_REQ_to_X509(X509_REQ *r, int days,EVP_PKEY *pkey);
-
-DECLARE_ASN1_FUNCTIONS(X509_ALGOR)
-DECLARE_ASN1_FUNCTIONS(X509_VAL)
-
-DECLARE_ASN1_FUNCTIONS(X509_PUBKEY)
-
-int		X509_PUBKEY_set(X509_PUBKEY **x, EVP_PKEY *pkey);
-EVP_PKEY *	X509_PUBKEY_get(X509_PUBKEY *key);
-int		X509_get_pubkey_parameters(EVP_PKEY *pkey,
-					   STACK_OF(X509) *chain);
-int		i2d_PUBKEY(EVP_PKEY *a,unsigned char **pp);
-EVP_PKEY *	d2i_PUBKEY(EVP_PKEY **a,const unsigned char **pp,
-			long length);
-#ifndef OPENSSL_NO_RSA
-int		i2d_RSA_PUBKEY(RSA *a,unsigned char **pp);
-RSA *		d2i_RSA_PUBKEY(RSA **a,const unsigned char **pp,
-			long length);
-#endif
-#ifndef OPENSSL_NO_DSA
-int		i2d_DSA_PUBKEY(DSA *a,unsigned char **pp);
-DSA *		d2i_DSA_PUBKEY(DSA **a,const unsigned char **pp,
-			long length);
-#endif
-#ifndef OPENSSL_NO_EC
-int		i2d_EC_PUBKEY(EC_KEY *a, unsigned char **pp);
-EC_KEY 		*d2i_EC_PUBKEY(EC_KEY **a, const unsigned char **pp,
-			long length);
-#endif
-
-DECLARE_ASN1_FUNCTIONS(X509_SIG)
-DECLARE_ASN1_FUNCTIONS(X509_REQ_INFO)
-DECLARE_ASN1_FUNCTIONS(X509_REQ)
-
-DECLARE_ASN1_FUNCTIONS(X509_ATTRIBUTE)
-X509_ATTRIBUTE *X509_ATTRIBUTE_create(int nid, int atrtype, void *value);
-
-DECLARE_ASN1_FUNCTIONS(X509_EXTENSION)
-
-DECLARE_ASN1_FUNCTIONS(X509_NAME_ENTRY)
-
-DECLARE_ASN1_FUNCTIONS(X509_NAME)
-
-int		X509_NAME_set(X509_NAME **xn, X509_NAME *name);
-
-DECLARE_ASN1_FUNCTIONS(X509_CINF)
-
-DECLARE_ASN1_FUNCTIONS(X509)
-DECLARE_ASN1_FUNCTIONS(X509_CERT_AUX)
-
-DECLARE_ASN1_FUNCTIONS(X509_CERT_PAIR)
-
-int X509_get_ex_new_index(long argl, void *argp, CRYPTO_EX_new *new_func,
-	     CRYPTO_EX_dup *dup_func, CRYPTO_EX_free *free_func);
-int X509_set_ex_data(X509 *r, int idx, void *arg);
-void *X509_get_ex_data(X509 *r, int idx);
-int		i2d_X509_AUX(X509 *a,unsigned char **pp);
-X509 *		d2i_X509_AUX(X509 **a,const unsigned char **pp,long length);
-
-int X509_alias_set1(X509 *x, unsigned char *name, int len);
-int X509_keyid_set1(X509 *x, unsigned char *id, int len);
-unsigned char * X509_alias_get0(X509 *x, int *len);
-unsigned char * X509_keyid_get0(X509 *x, int *len);
-int (*X509_TRUST_set_default(int (*trust)(int , X509 *, int)))(int, X509 *, int);
-int X509_TRUST_set(int *t, int trust);
-int X509_add1_trust_object(X509 *x, ASN1_OBJECT *obj);
-int X509_add1_reject_object(X509 *x, ASN1_OBJECT *obj);
-void X509_trust_clear(X509 *x);
-void X509_reject_clear(X509 *x);
-
-DECLARE_ASN1_FUNCTIONS(X509_REVOKED)
-DECLARE_ASN1_FUNCTIONS(X509_CRL_INFO)
-DECLARE_ASN1_FUNCTIONS(X509_CRL)
-
-int X509_CRL_add0_revoked(X509_CRL *crl, X509_REVOKED *rev);
-
-X509_PKEY *	X509_PKEY_new(void );
-void		X509_PKEY_free(X509_PKEY *a);
-int		i2d_X509_PKEY(X509_PKEY *a,unsigned char **pp);
-X509_PKEY *	d2i_X509_PKEY(X509_PKEY **a,const unsigned char **pp,long length);
-
-DECLARE_ASN1_FUNCTIONS(NETSCAPE_SPKI)
-DECLARE_ASN1_FUNCTIONS(NETSCAPE_SPKAC)
-DECLARE_ASN1_FUNCTIONS(NETSCAPE_CERT_SEQUENCE)
-
-#ifndef OPENSSL_NO_EVP
-X509_INFO *	X509_INFO_new(void);
-void		X509_INFO_free(X509_INFO *a);
-char *		X509_NAME_oneline(X509_NAME *a,char *buf,int size);
-
-int ASN1_verify(i2d_of_void *i2d, X509_ALGOR *algor1,
-		ASN1_BIT_STRING *signature,char *data,EVP_PKEY *pkey);
-
-int ASN1_digest(i2d_of_void *i2d,const EVP_MD *type,char *data,
-		unsigned char *md,unsigned int *len);
-
-int ASN1_sign(i2d_of_void *i2d, X509_ALGOR *algor1,
-	      X509_ALGOR *algor2, ASN1_BIT_STRING *signature,
-	      char *data,EVP_PKEY *pkey, const EVP_MD *type);
-
-int ASN1_item_digest(const ASN1_ITEM *it,const EVP_MD *type,void *data,
-	unsigned char *md,unsigned int *len);
-
-int ASN1_item_verify(const ASN1_ITEM *it, X509_ALGOR *algor1,
-	ASN1_BIT_STRING *signature,void *data,EVP_PKEY *pkey);
-
-int ASN1_item_sign(const ASN1_ITEM *it, X509_ALGOR *algor1, X509_ALGOR *algor2,
-	ASN1_BIT_STRING *signature,
-	void *data, EVP_PKEY *pkey, const EVP_MD *type);
-#endif
-
-int 		X509_set_version(X509 *x,long version);
-int 		X509_set_serialNumber(X509 *x, ASN1_INTEGER *serial);
-ASN1_INTEGER *	X509_get_serialNumber(X509 *x);
-int 		X509_set_issuer_name(X509 *x, X509_NAME *name);
-X509_NAME *	X509_get_issuer_name(X509 *a);
-int 		X509_set_subject_name(X509 *x, X509_NAME *name);
-X509_NAME *	X509_get_subject_name(X509 *a);
-int 		X509_set_notBefore(X509 *x, ASN1_TIME *tm);
-int 		X509_set_notAfter(X509 *x, ASN1_TIME *tm);
-int 		X509_set_pubkey(X509 *x, EVP_PKEY *pkey);
-EVP_PKEY *	X509_get_pubkey(X509 *x);
-ASN1_BIT_STRING * X509_get0_pubkey_bitstr(const X509 *x);
-int		X509_certificate_type(X509 *x,EVP_PKEY *pubkey /* optional */);
-
-int		X509_REQ_set_version(X509_REQ *x,long version);
-int		X509_REQ_set_subject_name(X509_REQ *req,X509_NAME *name);
-int		X509_REQ_set_pubkey(X509_REQ *x, EVP_PKEY *pkey);
-EVP_PKEY *	X509_REQ_get_pubkey(X509_REQ *req);
-int		X509_REQ_extension_nid(int nid);
-int *		X509_REQ_get_extension_nids(void);
-void		X509_REQ_set_extension_nids(int *nids);
-STACK_OF(X509_EXTENSION) *X509_REQ_get_extensions(X509_REQ *req);
-int X509_REQ_add_extensions_nid(X509_REQ *req, STACK_OF(X509_EXTENSION) *exts,
-				int nid);
-int X509_REQ_add_extensions(X509_REQ *req, STACK_OF(X509_EXTENSION) *exts);
-int X509_REQ_get_attr_count(const X509_REQ *req);
-int X509_REQ_get_attr_by_NID(const X509_REQ *req, int nid,
-			  int lastpos);
-int X509_REQ_get_attr_by_OBJ(const X509_REQ *req, ASN1_OBJECT *obj,
-			  int lastpos);
-X509_ATTRIBUTE *X509_REQ_get_attr(const X509_REQ *req, int loc);
-X509_ATTRIBUTE *X509_REQ_delete_attr(X509_REQ *req, int loc);
-int X509_REQ_add1_attr(X509_REQ *req, X509_ATTRIBUTE *attr);
-int X509_REQ_add1_attr_by_OBJ(X509_REQ *req,
-			const ASN1_OBJECT *obj, int type,
-			const unsigned char *bytes, int len);
-int X509_REQ_add1_attr_by_NID(X509_REQ *req,
-			int nid, int type,
-			const unsigned char *bytes, int len);
-int X509_REQ_add1_attr_by_txt(X509_REQ *req,
-			const char *attrname, int type,
-			const unsigned char *bytes, int len);
-
-int X509_CRL_set_version(X509_CRL *x, long version);
-int X509_CRL_set_issuer_name(X509_CRL *x, X509_NAME *name);
-int X509_CRL_set_lastUpdate(X509_CRL *x, ASN1_TIME *tm);
-int X509_CRL_set_nextUpdate(X509_CRL *x, ASN1_TIME *tm);
-int X509_CRL_sort(X509_CRL *crl);
-
-int X509_REVOKED_set_serialNumber(X509_REVOKED *x, ASN1_INTEGER *serial);
-int X509_REVOKED_set_revocationDate(X509_REVOKED *r, ASN1_TIME *tm);
-
-int		X509_REQ_check_private_key(X509_REQ *x509,EVP_PKEY *pkey);
-
-int		X509_check_private_key(X509 *x509,EVP_PKEY *pkey);
-
-int		X509_issuer_and_serial_cmp(const X509 *a, const X509 *b);
-unsigned long	X509_issuer_and_serial_hash(X509 *a);
-
-int		X509_issuer_name_cmp(const X509 *a, const X509 *b);
-unsigned long	X509_issuer_name_hash(X509 *a);
-
-int		X509_subject_name_cmp(const X509 *a, const X509 *b);
-unsigned long	X509_subject_name_hash(X509 *x);
-
-int		X509_cmp(const X509 *a, const X509 *b);
-int		X509_NAME_cmp(const X509_NAME *a, const X509_NAME *b);
-unsigned long	X509_NAME_hash(X509_NAME *x);
-
-int		X509_CRL_cmp(const X509_CRL *a, const X509_CRL *b);
-#ifndef OPENSSL_NO_FP_API
-int		X509_print_ex_fp(FILE *bp,X509 *x, unsigned long nmflag, unsigned long cflag);
-int		X509_print_fp(FILE *bp,X509 *x);
-int		X509_CRL_print_fp(FILE *bp,X509_CRL *x);
-int		X509_REQ_print_fp(FILE *bp,X509_REQ *req);
-int X509_NAME_print_ex_fp(FILE *fp, X509_NAME *nm, int indent, unsigned long flags);
-#endif
-
-#ifndef OPENSSL_NO_BIO
-int		X509_NAME_print(BIO *bp, X509_NAME *name, int obase);
-int X509_NAME_print_ex(BIO *out, X509_NAME *nm, int indent, unsigned long flags);
-int		X509_print_ex(BIO *bp,X509 *x, unsigned long nmflag, unsigned long cflag);
-int		X509_print(BIO *bp,X509 *x);
-int		X509_ocspid_print(BIO *bp,X509 *x);
-int		X509_CERT_AUX_print(BIO *bp,X509_CERT_AUX *x, int indent);
-int		X509_CRL_print(BIO *bp,X509_CRL *x);
-int		X509_REQ_print_ex(BIO *bp, X509_REQ *x, unsigned long nmflag, unsigned long cflag);
-int		X509_REQ_print(BIO *bp,X509_REQ *req);
-#endif
-
-int 		X509_NAME_entry_count(X509_NAME *name);
-int 		X509_NAME_get_text_by_NID(X509_NAME *name, int nid,
-			char *buf,int len);
-int		X509_NAME_get_text_by_OBJ(X509_NAME *name, ASN1_OBJECT *obj,
-			char *buf,int len);
-
-/* NOTE: you should be passsing -1, not 0 as lastpos.  The functions that use
- * lastpos, search after that position on. */
-int 		X509_NAME_get_index_by_NID(X509_NAME *name,int nid,int lastpos);
-int 		X509_NAME_get_index_by_OBJ(X509_NAME *name,ASN1_OBJECT *obj,
-			int lastpos);
-X509_NAME_ENTRY *X509_NAME_get_entry(X509_NAME *name, int loc);
-X509_NAME_ENTRY *X509_NAME_delete_entry(X509_NAME *name, int loc);
-int 		X509_NAME_add_entry(X509_NAME *name,X509_NAME_ENTRY *ne,
-			int loc, int set);
-int X509_NAME_add_entry_by_OBJ(X509_NAME *name, ASN1_OBJECT *obj, int type,
-			unsigned char *bytes, int len, int loc, int set);
-int X509_NAME_add_entry_by_NID(X509_NAME *name, int nid, int type,
-			unsigned char *bytes, int len, int loc, int set);
-X509_NAME_ENTRY *X509_NAME_ENTRY_create_by_txt(X509_NAME_ENTRY **ne,
-		const char *field, int type, const unsigned char *bytes, int len);
-X509_NAME_ENTRY *X509_NAME_ENTRY_create_by_NID(X509_NAME_ENTRY **ne, int nid,
-			int type,unsigned char *bytes, int len);
-int X509_NAME_add_entry_by_txt(X509_NAME *name, const char *field, int type,
-			const unsigned char *bytes, int len, int loc, int set);
-X509_NAME_ENTRY *X509_NAME_ENTRY_create_by_OBJ(X509_NAME_ENTRY **ne,
-			ASN1_OBJECT *obj, int type,const unsigned char *bytes,
-			int len);
-int 		X509_NAME_ENTRY_set_object(X509_NAME_ENTRY *ne,
-			ASN1_OBJECT *obj);
-int 		X509_NAME_ENTRY_set_data(X509_NAME_ENTRY *ne, int type,
-			const unsigned char *bytes, int len);
-ASN1_OBJECT *	X509_NAME_ENTRY_get_object(X509_NAME_ENTRY *ne);
-ASN1_STRING *	X509_NAME_ENTRY_get_data(X509_NAME_ENTRY *ne);
-
-int		X509v3_get_ext_count(const STACK_OF(X509_EXTENSION) *x);
-int		X509v3_get_ext_by_NID(const STACK_OF(X509_EXTENSION) *x,
-				      int nid, int lastpos);
-int		X509v3_get_ext_by_OBJ(const STACK_OF(X509_EXTENSION) *x,
-				      ASN1_OBJECT *obj,int lastpos);
-int		X509v3_get_ext_by_critical(const STACK_OF(X509_EXTENSION) *x,
-					   int crit, int lastpos);
-X509_EXTENSION *X509v3_get_ext(const STACK_OF(X509_EXTENSION) *x, int loc);
-X509_EXTENSION *X509v3_delete_ext(STACK_OF(X509_EXTENSION) *x, int loc);
-STACK_OF(X509_EXTENSION) *X509v3_add_ext(STACK_OF(X509_EXTENSION) **x,
-					 X509_EXTENSION *ex, int loc);
-
-int		X509_get_ext_count(X509 *x);
-int		X509_get_ext_by_NID(X509 *x, int nid, int lastpos);
-int		X509_get_ext_by_OBJ(X509 *x,ASN1_OBJECT *obj,int lastpos);
-int		X509_get_ext_by_critical(X509 *x, int crit, int lastpos);
-X509_EXTENSION *X509_get_ext(X509 *x, int loc);
-X509_EXTENSION *X509_delete_ext(X509 *x, int loc);
-int		X509_add_ext(X509 *x, X509_EXTENSION *ex, int loc);
-void	*	X509_get_ext_d2i(X509 *x, int nid, int *crit, int *idx);
-int		X509_add1_ext_i2d(X509 *x, int nid, void *value, int crit,
-							unsigned long flags);
-
-int		X509_CRL_get_ext_count(X509_CRL *x);
-int		X509_CRL_get_ext_by_NID(X509_CRL *x, int nid, int lastpos);
-int		X509_CRL_get_ext_by_OBJ(X509_CRL *x,ASN1_OBJECT *obj,int lastpos);
-int		X509_CRL_get_ext_by_critical(X509_CRL *x, int crit, int lastpos);
-X509_EXTENSION *X509_CRL_get_ext(X509_CRL *x, int loc);
-X509_EXTENSION *X509_CRL_delete_ext(X509_CRL *x, int loc);
-int		X509_CRL_add_ext(X509_CRL *x, X509_EXTENSION *ex, int loc);
-void	*	X509_CRL_get_ext_d2i(X509_CRL *x, int nid, int *crit, int *idx);
-int		X509_CRL_add1_ext_i2d(X509_CRL *x, int nid, void *value, int crit,
-							unsigned long flags);
-
-int		X509_REVOKED_get_ext_count(X509_REVOKED *x);
-int		X509_REVOKED_get_ext_by_NID(X509_REVOKED *x, int nid, int lastpos);
-int		X509_REVOKED_get_ext_by_OBJ(X509_REVOKED *x,ASN1_OBJECT *obj,int lastpos);
-int		X509_REVOKED_get_ext_by_critical(X509_REVOKED *x, int crit, int lastpos);
-X509_EXTENSION *X509_REVOKED_get_ext(X509_REVOKED *x, int loc);
-X509_EXTENSION *X509_REVOKED_delete_ext(X509_REVOKED *x, int loc);
-int		X509_REVOKED_add_ext(X509_REVOKED *x, X509_EXTENSION *ex, int loc);
-void	*	X509_REVOKED_get_ext_d2i(X509_REVOKED *x, int nid, int *crit, int *idx);
-int		X509_REVOKED_add1_ext_i2d(X509_REVOKED *x, int nid, void *value, int crit,
-							unsigned long flags);
-
-X509_EXTENSION *X509_EXTENSION_create_by_NID(X509_EXTENSION **ex,
-			int nid, int crit, ASN1_OCTET_STRING *data);
-X509_EXTENSION *X509_EXTENSION_create_by_OBJ(X509_EXTENSION **ex,
-			ASN1_OBJECT *obj,int crit,ASN1_OCTET_STRING *data);
-int		X509_EXTENSION_set_object(X509_EXTENSION *ex,ASN1_OBJECT *obj);
-int		X509_EXTENSION_set_critical(X509_EXTENSION *ex, int crit);
-int		X509_EXTENSION_set_data(X509_EXTENSION *ex,
-			ASN1_OCTET_STRING *data);
-ASN1_OBJECT *	X509_EXTENSION_get_object(X509_EXTENSION *ex);
-ASN1_OCTET_STRING *X509_EXTENSION_get_data(X509_EXTENSION *ne);
-int		X509_EXTENSION_get_critical(X509_EXTENSION *ex);
-
-int X509at_get_attr_count(const STACK_OF(X509_ATTRIBUTE) *x);
-int X509at_get_attr_by_NID(const STACK_OF(X509_ATTRIBUTE) *x, int nid,
-			  int lastpos);
-int X509at_get_attr_by_OBJ(const STACK_OF(X509_ATTRIBUTE) *sk, ASN1_OBJECT *obj,
-			  int lastpos);
-X509_ATTRIBUTE *X509at_get_attr(const STACK_OF(X509_ATTRIBUTE) *x, int loc);
-X509_ATTRIBUTE *X509at_delete_attr(STACK_OF(X509_ATTRIBUTE) *x, int loc);
-STACK_OF(X509_ATTRIBUTE) *X509at_add1_attr(STACK_OF(X509_ATTRIBUTE) **x,
-					 X509_ATTRIBUTE *attr);
-STACK_OF(X509_ATTRIBUTE) *X509at_add1_attr_by_OBJ(STACK_OF(X509_ATTRIBUTE) **x,
-			const ASN1_OBJECT *obj, int type,
-			const unsigned char *bytes, int len);
-STACK_OF(X509_ATTRIBUTE) *X509at_add1_attr_by_NID(STACK_OF(X509_ATTRIBUTE) **x,
-			int nid, int type,
-			const unsigned char *bytes, int len);
-STACK_OF(X509_ATTRIBUTE) *X509at_add1_attr_by_txt(STACK_OF(X509_ATTRIBUTE) **x,
-			const char *attrname, int type,
-			const unsigned char *bytes, int len);
-X509_ATTRIBUTE *X509_ATTRIBUTE_create_by_NID(X509_ATTRIBUTE **attr, int nid,
-	     int atrtype, const void *data, int len);
-X509_ATTRIBUTE *X509_ATTRIBUTE_create_by_OBJ(X509_ATTRIBUTE **attr,
-	     const ASN1_OBJECT *obj, int atrtype, const void *data, int len);
-X509_ATTRIBUTE *X509_ATTRIBUTE_create_by_txt(X509_ATTRIBUTE **attr,
-		const char *atrname, int type, const unsigned char *bytes, int len);
-int X509_ATTRIBUTE_set1_object(X509_ATTRIBUTE *attr, const ASN1_OBJECT *obj);
-int X509_ATTRIBUTE_set1_data(X509_ATTRIBUTE *attr, int attrtype, const void *data, int len);
-void *X509_ATTRIBUTE_get0_data(X509_ATTRIBUTE *attr, int idx,
-					int atrtype, void *data);
-int X509_ATTRIBUTE_count(X509_ATTRIBUTE *attr);
-ASN1_OBJECT *X509_ATTRIBUTE_get0_object(X509_ATTRIBUTE *attr);
-ASN1_TYPE *X509_ATTRIBUTE_get0_type(X509_ATTRIBUTE *attr, int idx);
-
-int EVP_PKEY_get_attr_count(const EVP_PKEY *key);
-int EVP_PKEY_get_attr_by_NID(const EVP_PKEY *key, int nid,
-			  int lastpos);
-int EVP_PKEY_get_attr_by_OBJ(const EVP_PKEY *key, ASN1_OBJECT *obj,
-			  int lastpos);
-X509_ATTRIBUTE *EVP_PKEY_get_attr(const EVP_PKEY *key, int loc);
-X509_ATTRIBUTE *EVP_PKEY_delete_attr(EVP_PKEY *key, int loc);
-int EVP_PKEY_add1_attr(EVP_PKEY *key, X509_ATTRIBUTE *attr);
-int EVP_PKEY_add1_attr_by_OBJ(EVP_PKEY *key,
-			const ASN1_OBJECT *obj, int type,
-			const unsigned char *bytes, int len);
-int EVP_PKEY_add1_attr_by_NID(EVP_PKEY *key,
-			int nid, int type,
-			const unsigned char *bytes, int len);
-int EVP_PKEY_add1_attr_by_txt(EVP_PKEY *key,
-			const char *attrname, int type,
-			const unsigned char *bytes, int len);
-
-int		X509_verify_cert(X509_STORE_CTX *ctx);
-
-/* lookup a cert from a X509 STACK */
-X509 *X509_find_by_issuer_and_serial(STACK_OF(X509) *sk,X509_NAME *name,
-				     ASN1_INTEGER *serial);
-X509 *X509_find_by_subject(STACK_OF(X509) *sk,X509_NAME *name);
-
-DECLARE_ASN1_FUNCTIONS(PBEPARAM)
-DECLARE_ASN1_FUNCTIONS(PBE2PARAM)
-DECLARE_ASN1_FUNCTIONS(PBKDF2PARAM)
-
-X509_ALGOR *PKCS5_pbe_set(int alg, int iter, unsigned char *salt, int saltlen);
-X509_ALGOR *PKCS5_pbe2_set(const EVP_CIPHER *cipher, int iter,
-					 unsigned char *salt, int saltlen);
-
-/* PKCS#8 utilities */
-
-DECLARE_ASN1_FUNCTIONS(PKCS8_PRIV_KEY_INFO)
-
-EVP_PKEY *EVP_PKCS82PKEY(PKCS8_PRIV_KEY_INFO *p8);
-PKCS8_PRIV_KEY_INFO *EVP_PKEY2PKCS8(EVP_PKEY *pkey);
-PKCS8_PRIV_KEY_INFO *EVP_PKEY2PKCS8_broken(EVP_PKEY *pkey, int broken);
-PKCS8_PRIV_KEY_INFO *PKCS8_set_broken(PKCS8_PRIV_KEY_INFO *p8, int broken);
-
-int X509_check_trust(X509 *x, int id, int flags);
-int X509_TRUST_get_count(void);
-X509_TRUST * X509_TRUST_get0(int idx);
-int X509_TRUST_get_by_id(int id);
-int X509_TRUST_add(int id, int flags, int (*ck)(X509_TRUST *, X509 *, int),
-					char *name, int arg1, void *arg2);
-void X509_TRUST_cleanup(void);
-int X509_TRUST_get_flags(X509_TRUST *xp);
-char *X509_TRUST_get0_name(X509_TRUST *xp);
-int X509_TRUST_get_trust(X509_TRUST *xp);
-
-/* BEGIN ERROR CODES */
-/* The following lines are auto generated by the script mkerr.pl. Any changes
- * made after this point may be overwritten when the script is next run.
- */
-void ERR_load_X509_strings(void);
-
-/* Error codes for the X509 functions. */
-
-/* Function codes. */
-#define X509_F_ADD_CERT_DIR				 100
-#define X509_F_BY_FILE_CTRL				 101
-#define X509_F_CHECK_POLICY				 145
-#define X509_F_DIR_CTRL					 102
-#define X509_F_GET_CERT_BY_SUBJECT			 103
-#define X509_F_NETSCAPE_SPKI_B64_DECODE			 129
-#define X509_F_NETSCAPE_SPKI_B64_ENCODE			 130
-#define X509_F_X509AT_ADD1_ATTR				 135
-#define X509_F_X509V3_ADD_EXT				 104
-#define X509_F_X509_ATTRIBUTE_CREATE_BY_NID		 136
-#define X509_F_X509_ATTRIBUTE_CREATE_BY_OBJ		 137
-#define X509_F_X509_ATTRIBUTE_CREATE_BY_TXT		 140
-#define X509_F_X509_ATTRIBUTE_GET0_DATA			 139
-#define X509_F_X509_ATTRIBUTE_SET1_DATA			 138
-#define X509_F_X509_CHECK_PRIVATE_KEY			 128
-#define X509_F_X509_CRL_PRINT_FP			 147
-#define X509_F_X509_EXTENSION_CREATE_BY_NID		 108
-#define X509_F_X509_EXTENSION_CREATE_BY_OBJ		 109
-#define X509_F_X509_GET_PUBKEY_PARAMETERS		 110
-#define X509_F_X509_LOAD_CERT_CRL_FILE			 132
-#define X509_F_X509_LOAD_CERT_FILE			 111
-#define X509_F_X509_LOAD_CRL_FILE			 112
-#define X509_F_X509_NAME_ADD_ENTRY			 113
-#define X509_F_X509_NAME_ENTRY_CREATE_BY_NID		 114
-#define X509_F_X509_NAME_ENTRY_CREATE_BY_TXT		 131
-#define X509_F_X509_NAME_ENTRY_SET_OBJECT		 115
-#define X509_F_X509_NAME_ONELINE			 116
-#define X509_F_X509_NAME_PRINT				 117
-#define X509_F_X509_PRINT_EX_FP				 118
-#define X509_F_X509_PUBKEY_GET				 119
-#define X509_F_X509_PUBKEY_SET				 120
-#define X509_F_X509_REQ_CHECK_PRIVATE_KEY		 144
-#define X509_F_X509_REQ_PRINT_EX			 121
-#define X509_F_X509_REQ_PRINT_FP			 122
-#define X509_F_X509_REQ_TO_X509				 123
-#define X509_F_X509_STORE_ADD_CERT			 124
-#define X509_F_X509_STORE_ADD_CRL			 125
-#define X509_F_X509_STORE_CTX_GET1_ISSUER		 146
-#define X509_F_X509_STORE_CTX_INIT			 143
-#define X509_F_X509_STORE_CTX_NEW			 142
-#define X509_F_X509_STORE_CTX_PURPOSE_INHERIT		 134
-#define X509_F_X509_TO_X509_REQ				 126
-#define X509_F_X509_TRUST_ADD				 133
-#define X509_F_X509_TRUST_SET				 141
-#define X509_F_X509_VERIFY_CERT				 127
-
-/* Reason codes. */
-#define X509_R_BAD_X509_FILETYPE			 100
-#define X509_R_BASE64_DECODE_ERROR			 118
-#define X509_R_CANT_CHECK_DH_KEY			 114
-#define X509_R_CERT_ALREADY_IN_HASH_TABLE		 101
-#define X509_R_ERR_ASN1_LIB				 102
-#define X509_R_INVALID_DIRECTORY			 113
-#define X509_R_INVALID_FIELD_NAME			 119
-#define X509_R_INVALID_TRUST				 123
-#define X509_R_KEY_TYPE_MISMATCH			 115
-#define X509_R_KEY_VALUES_MISMATCH			 116
-#define X509_R_LOADING_CERT_DIR				 103
-#define X509_R_LOADING_DEFAULTS				 104
-#define X509_R_NO_CERT_SET_FOR_US_TO_VERIFY		 105
-#define X509_R_SHOULD_RETRY				 106
-#define X509_R_UNABLE_TO_FIND_PARAMETERS_IN_CHAIN	 107
-#define X509_R_UNABLE_TO_GET_CERTS_PUBLIC_KEY		 108
-#define X509_R_UNKNOWN_KEY_TYPE				 117
-#define X509_R_UNKNOWN_NID				 109
-#define X509_R_UNKNOWN_PURPOSE_ID			 121
-#define X509_R_UNKNOWN_TRUST_ID				 120
-#define X509_R_UNSUPPORTED_ALGORITHM			 111
-#define X509_R_WRONG_LOOKUP_TYPE			 112
-#define X509_R_WRONG_TYPE				 122
-
-#ifdef  __cplusplus
-}
-#endif
-#endif
diff --git a/crypto/openssl/crypto/x509/x509_att.c b/crypto/openssl/crypto/x509/x509_att.c
deleted file mode 100644
index 65968c4944aa..000000000000
--- a/crypto/openssl/crypto/x509/x509_att.c
+++ /dev/null
@@ -1,332 +0,0 @@
-/* crypto/x509/x509_att.c */
-/* Copyright (C) 1995-1998 Eric Young (eay@cryptsoft.com)
- * All rights reserved.
- *
- * This package is an SSL implementation written
- * by Eric Young (eay@cryptsoft.com).
- * The implementation was written so as to conform with Netscapes SSL.
- * 
- * This library is free for commercial and non-commercial use as long as
- * the following conditions are aheared to.  The following conditions
- * apply to all code found in this distribution, be it the RC4, RSA,
- * lhash, DES, etc., code; not just the SSL code.  The SSL documentation
- * included with this distribution is covered by the same copyright terms
- * except that the holder is Tim Hudson (tjh@cryptsoft.com).
- * 
- * Copyright remains Eric Young's, and as such any Copyright notices in
- * the code are not to be removed.
- * If this package is used in a product, Eric Young should be given attribution
- * as the author of the parts of the library used.
- * This can be in the form of a textual message at program startup or
- * in documentation (online or textual) provided with the package.
- * 
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions
- * are met:
- * 1. Redistributions of source code must retain the copyright
- *    notice, this list of conditions and the following disclaimer.
- * 2. Redistributions in binary form must reproduce the above copyright
- *    notice, this list of conditions and the following disclaimer in the
- *    documentation and/or other materials provided with the distribution.
- * 3. All advertising materials mentioning features or use of this software
- *    must display the following acknowledgement:
- *    "This product includes cryptographic software written by
- *     Eric Young (eay@cryptsoft.com)"
- *    The word 'cryptographic' can be left out if the rouines from the library
- *    being used are not cryptographic related :-).
- * 4. If you include any Windows specific code (or a derivative thereof) from 
- *    the apps directory (application code) you must include an acknowledgement:
- *    "This product includes software written by Tim Hudson (tjh@cryptsoft.com)"
- * 
- * THIS SOFTWARE IS PROVIDED BY ERIC YOUNG ``AS IS'' AND
- * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
- * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
- * ARE DISCLAIMED.  IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE
- * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
- * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
- * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
- * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
- * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
- * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
- * SUCH DAMAGE.
- * 
- * The licence and distribution terms for any publically available version or
- * derivative of this code cannot be changed.  i.e. this code cannot simply be
- * copied and put under another distribution licence
- * [including the GNU Public Licence.]
- */
-
-#include <stdio.h>
-#include <openssl/stack.h>
-#include "cryptlib.h"
-#include <openssl/asn1.h>
-#include <openssl/objects.h>
-#include <openssl/evp.h>
-#include <openssl/x509.h>
-#include <openssl/x509v3.h>
-
-int X509at_get_attr_count(const STACK_OF(X509_ATTRIBUTE) *x)
-{
-	if (!x) return 0;
-	return(sk_X509_ATTRIBUTE_num(x));
-}
-
-int X509at_get_attr_by_NID(const STACK_OF(X509_ATTRIBUTE) *x, int nid,
-			  int lastpos)
-{
-	ASN1_OBJECT *obj;
-
-	obj=OBJ_nid2obj(nid);
-	if (obj == NULL) return(-2);
-	return(X509at_get_attr_by_OBJ(x,obj,lastpos));
-}
-
-int X509at_get_attr_by_OBJ(const STACK_OF(X509_ATTRIBUTE) *sk, ASN1_OBJECT *obj,
-			  int lastpos)
-{
-	int n;
-	X509_ATTRIBUTE *ex;
-
-	if (sk == NULL) return(-1);
-	lastpos++;
-	if (lastpos < 0)
-		lastpos=0;
-	n=sk_X509_ATTRIBUTE_num(sk);
-	for ( ; lastpos < n; lastpos++)
-		{
-		ex=sk_X509_ATTRIBUTE_value(sk,lastpos);
-		if (OBJ_cmp(ex->object,obj) == 0)
-			return(lastpos);
-		}
-	return(-1);
-}
-
-X509_ATTRIBUTE *X509at_get_attr(const STACK_OF(X509_ATTRIBUTE) *x, int loc)
-{
-	if (x == NULL || sk_X509_ATTRIBUTE_num(x) <= loc || loc < 0)
-		return NULL;
-	else
-		return sk_X509_ATTRIBUTE_value(x,loc);
-}
-
-X509_ATTRIBUTE *X509at_delete_attr(STACK_OF(X509_ATTRIBUTE) *x, int loc)
-{
-	X509_ATTRIBUTE *ret;
-
-	if (x == NULL || sk_X509_ATTRIBUTE_num(x) <= loc || loc < 0)
-		return(NULL);
-	ret=sk_X509_ATTRIBUTE_delete(x,loc);
-	return(ret);
-}
-
-STACK_OF(X509_ATTRIBUTE) *X509at_add1_attr(STACK_OF(X509_ATTRIBUTE) **x,
-					 X509_ATTRIBUTE *attr)
-{
-	X509_ATTRIBUTE *new_attr=NULL;
-	STACK_OF(X509_ATTRIBUTE) *sk=NULL;
-
-	if (x == NULL)
-		{
-		X509err(X509_F_X509AT_ADD1_ATTR, ERR_R_PASSED_NULL_PARAMETER);
-		goto err2;
-		} 
-
-	if (*x == NULL)
-		{
-		if ((sk=sk_X509_ATTRIBUTE_new_null()) == NULL)
-			goto err;
-		}
-	else
-		sk= *x;
-
-	if ((new_attr=X509_ATTRIBUTE_dup(attr)) == NULL)
-		goto err2;
-	if (!sk_X509_ATTRIBUTE_push(sk,new_attr))
-		goto err;
-	if (*x == NULL)
-		*x=sk;
-	return(sk);
-err:
-	X509err(X509_F_X509AT_ADD1_ATTR,ERR_R_MALLOC_FAILURE);
-err2:
-	if (new_attr != NULL) X509_ATTRIBUTE_free(new_attr);
-	if (sk != NULL) sk_X509_ATTRIBUTE_free(sk);
-	return(NULL);
-}
-
-STACK_OF(X509_ATTRIBUTE) *X509at_add1_attr_by_OBJ(STACK_OF(X509_ATTRIBUTE) **x,
-			const ASN1_OBJECT *obj, int type,
-			const unsigned char *bytes, int len)
-{
-	X509_ATTRIBUTE *attr;
-	STACK_OF(X509_ATTRIBUTE) *ret;
-	attr = X509_ATTRIBUTE_create_by_OBJ(NULL, obj, type, bytes, len);
-	if(!attr) return 0;
-	ret = X509at_add1_attr(x, attr);
-	X509_ATTRIBUTE_free(attr);
-	return ret;
-}
-
-STACK_OF(X509_ATTRIBUTE) *X509at_add1_attr_by_NID(STACK_OF(X509_ATTRIBUTE) **x,
-			int nid, int type,
-			const unsigned char *bytes, int len)
-{
-	X509_ATTRIBUTE *attr;
-	STACK_OF(X509_ATTRIBUTE) *ret;
-	attr = X509_ATTRIBUTE_create_by_NID(NULL, nid, type, bytes, len);
-	if(!attr) return 0;
-	ret = X509at_add1_attr(x, attr);
-	X509_ATTRIBUTE_free(attr);
-	return ret;
-}
-
-STACK_OF(X509_ATTRIBUTE) *X509at_add1_attr_by_txt(STACK_OF(X509_ATTRIBUTE) **x,
-			const char *attrname, int type,
-			const unsigned char *bytes, int len)
-{
-	X509_ATTRIBUTE *attr;
-	STACK_OF(X509_ATTRIBUTE) *ret;
-	attr = X509_ATTRIBUTE_create_by_txt(NULL, attrname, type, bytes, len);
-	if(!attr) return 0;
-	ret = X509at_add1_attr(x, attr);
-	X509_ATTRIBUTE_free(attr);
-	return ret;
-}
-
-X509_ATTRIBUTE *X509_ATTRIBUTE_create_by_NID(X509_ATTRIBUTE **attr, int nid,
-	     int atrtype, const void *data, int len)
-{
-	ASN1_OBJECT *obj;
-	X509_ATTRIBUTE *ret;
-
-	obj=OBJ_nid2obj(nid);
-	if (obj == NULL)
-		{
-		X509err(X509_F_X509_ATTRIBUTE_CREATE_BY_NID,X509_R_UNKNOWN_NID);
-		return(NULL);
-		}
-	ret=X509_ATTRIBUTE_create_by_OBJ(attr,obj,atrtype,data,len);
-	if (ret == NULL) ASN1_OBJECT_free(obj);
-	return(ret);
-}
-
-X509_ATTRIBUTE *X509_ATTRIBUTE_create_by_OBJ(X509_ATTRIBUTE **attr,
-	     const ASN1_OBJECT *obj, int atrtype, const void *data, int len)
-{
-	X509_ATTRIBUTE *ret;
-
-	if ((attr == NULL) || (*attr == NULL))
-		{
-		if ((ret=X509_ATTRIBUTE_new()) == NULL)
-			{
-			X509err(X509_F_X509_ATTRIBUTE_CREATE_BY_OBJ,ERR_R_MALLOC_FAILURE);
-			return(NULL);
-			}
-		}
-	else
-		ret= *attr;
-
-	if (!X509_ATTRIBUTE_set1_object(ret,obj))
-		goto err;
-	if (!X509_ATTRIBUTE_set1_data(ret,atrtype,data,len))
-		goto err;
-	
-	if ((attr != NULL) && (*attr == NULL)) *attr=ret;
-	return(ret);
-err:
-	if ((attr == NULL) || (ret != *attr))
-		X509_ATTRIBUTE_free(ret);
-	return(NULL);
-}
-
-X509_ATTRIBUTE *X509_ATTRIBUTE_create_by_txt(X509_ATTRIBUTE **attr,
-		const char *atrname, int type, const unsigned char *bytes, int len)
-	{
-	ASN1_OBJECT *obj;
-	X509_ATTRIBUTE *nattr;
-
-	obj=OBJ_txt2obj(atrname, 0);
-	if (obj == NULL)
-		{
-		X509err(X509_F_X509_ATTRIBUTE_CREATE_BY_TXT,
-						X509_R_INVALID_FIELD_NAME);
-		ERR_add_error_data(2, "name=", atrname);
-		return(NULL);
-		}
-	nattr = X509_ATTRIBUTE_create_by_OBJ(attr,obj,type,bytes,len);
-	ASN1_OBJECT_free(obj);
-	return nattr;
-	}
-
-int X509_ATTRIBUTE_set1_object(X509_ATTRIBUTE *attr, const ASN1_OBJECT *obj)
-{
-	if ((attr == NULL) || (obj == NULL))
-		return(0);
-	ASN1_OBJECT_free(attr->object);
-	attr->object=OBJ_dup(obj);
-	return(1);
-}
-
-int X509_ATTRIBUTE_set1_data(X509_ATTRIBUTE *attr, int attrtype, const void *data, int len)
-{
-	ASN1_TYPE *ttmp;
-	ASN1_STRING *stmp;
-	int atype;
-	if (!attr) return 0;
-	if(attrtype & MBSTRING_FLAG) {
-		stmp = ASN1_STRING_set_by_NID(NULL, data, len, attrtype,
-						OBJ_obj2nid(attr->object));
-		if(!stmp) {
-			X509err(X509_F_X509_ATTRIBUTE_SET1_DATA, ERR_R_ASN1_LIB);
-			return 0;
-		}
-		atype = stmp->type;
-	} else {
-		if(!(stmp = ASN1_STRING_type_new(attrtype))) goto err;
-		if(!ASN1_STRING_set(stmp, data, len)) goto err;
-		atype = attrtype;
-	}
-	if(!(attr->value.set = sk_ASN1_TYPE_new_null())) goto err;
-	if(!(ttmp = ASN1_TYPE_new())) goto err;
-	if(!sk_ASN1_TYPE_push(attr->value.set, ttmp)) goto err;
-	attr->single = 0;
-	ASN1_TYPE_set(ttmp, atype, stmp);
-	return 1;
-	err:
-	X509err(X509_F_X509_ATTRIBUTE_SET1_DATA, ERR_R_MALLOC_FAILURE);
-	return 0;
-}
-
-int X509_ATTRIBUTE_count(X509_ATTRIBUTE *attr)
-{
-	if(!attr->single) return sk_ASN1_TYPE_num(attr->value.set);
-	if(attr->value.single) return 1;
-	return 0;
-}
-
-ASN1_OBJECT *X509_ATTRIBUTE_get0_object(X509_ATTRIBUTE *attr)
-{
-	if (attr == NULL) return(NULL);
-	return(attr->object);
-}
-
-void *X509_ATTRIBUTE_get0_data(X509_ATTRIBUTE *attr, int idx,
-					int atrtype, void *data)
-{
-	ASN1_TYPE *ttmp;
-	ttmp = X509_ATTRIBUTE_get0_type(attr, idx);
-	if(!ttmp) return NULL;
-	if(atrtype != ASN1_TYPE_get(ttmp)){
-		X509err(X509_F_X509_ATTRIBUTE_GET0_DATA, X509_R_WRONG_TYPE);
-		return NULL;
-	}
-	return ttmp->value.ptr;
-}
-
-ASN1_TYPE *X509_ATTRIBUTE_get0_type(X509_ATTRIBUTE *attr, int idx)
-{
-	if (attr == NULL) return(NULL);
-	if(idx >= X509_ATTRIBUTE_count(attr)) return NULL;
-	if(!attr->single) return sk_ASN1_TYPE_value(attr->value.set, idx);
-	else return attr->value.single;
-}
diff --git a/crypto/openssl/crypto/x509/x509_cmp.c b/crypto/openssl/crypto/x509/x509_cmp.c
deleted file mode 100644
index 0d6bc653b21b..000000000000
--- a/crypto/openssl/crypto/x509/x509_cmp.c
+++ /dev/null
@@ -1,425 +0,0 @@
-/* crypto/x509/x509_cmp.c */
-/* Copyright (C) 1995-1998 Eric Young (eay@cryptsoft.com)
- * All rights reserved.
- *
- * This package is an SSL implementation written
- * by Eric Young (eay@cryptsoft.com).
- * The implementation was written so as to conform with Netscapes SSL.
- * 
- * This library is free for commercial and non-commercial use as long as
- * the following conditions are aheared to.  The following conditions
- * apply to all code found in this distribution, be it the RC4, RSA,
- * lhash, DES, etc., code; not just the SSL code.  The SSL documentation
- * included with this distribution is covered by the same copyright terms
- * except that the holder is Tim Hudson (tjh@cryptsoft.com).
- * 
- * Copyright remains Eric Young's, and as such any Copyright notices in
- * the code are not to be removed.
- * If this package is used in a product, Eric Young should be given attribution
- * as the author of the parts of the library used.
- * This can be in the form of a textual message at program startup or
- * in documentation (online or textual) provided with the package.
- * 
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions
- * are met:
- * 1. Redistributions of source code must retain the copyright
- *    notice, this list of conditions and the following disclaimer.
- * 2. Redistributions in binary form must reproduce the above copyright
- *    notice, this list of conditions and the following disclaimer in the
- *    documentation and/or other materials provided with the distribution.
- * 3. All advertising materials mentioning features or use of this software
- *    must display the following acknowledgement:
- *    "This product includes cryptographic software written by
- *     Eric Young (eay@cryptsoft.com)"
- *    The word 'cryptographic' can be left out if the rouines from the library
- *    being used are not cryptographic related :-).
- * 4. If you include any Windows specific code (or a derivative thereof) from 
- *    the apps directory (application code) you must include an acknowledgement:
- *    "This product includes software written by Tim Hudson (tjh@cryptsoft.com)"
- * 
- * THIS SOFTWARE IS PROVIDED BY ERIC YOUNG ``AS IS'' AND
- * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
- * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
- * ARE DISCLAIMED.  IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE
- * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
- * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
- * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
- * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
- * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
- * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
- * SUCH DAMAGE.
- * 
- * The licence and distribution terms for any publically available version or
- * derivative of this code cannot be changed.  i.e. this code cannot simply be
- * copied and put under another distribution licence
- * [including the GNU Public Licence.]
- */
-
-#include <stdio.h>
-#include <ctype.h>
-#include "cryptlib.h"
-#include <openssl/asn1.h>
-#include <openssl/objects.h>
-#include <openssl/x509.h>
-#include <openssl/x509v3.h>
-
-int X509_issuer_and_serial_cmp(const X509 *a, const X509 *b)
-	{
-	int i;
-	X509_CINF *ai,*bi;
-
-	ai=a->cert_info;
-	bi=b->cert_info;
-	i=M_ASN1_INTEGER_cmp(ai->serialNumber,bi->serialNumber);
-	if (i) return(i);
-	return(X509_NAME_cmp(ai->issuer,bi->issuer));
-	}
-
-#ifndef OPENSSL_NO_MD5
-unsigned long X509_issuer_and_serial_hash(X509 *a)
-	{
-	unsigned long ret=0;
-	EVP_MD_CTX ctx;
-	unsigned char md[16];
-	char *f;
-
-	EVP_MD_CTX_init(&ctx);
-	f=X509_NAME_oneline(a->cert_info->issuer,NULL,0);
-	ret=strlen(f);
-	EVP_DigestInit_ex(&ctx, EVP_md5(), NULL);
-	EVP_DigestUpdate(&ctx,(unsigned char *)f,ret);
-	OPENSSL_free(f);
-	EVP_DigestUpdate(&ctx,(unsigned char *)a->cert_info->serialNumber->data,
-		(unsigned long)a->cert_info->serialNumber->length);
-	EVP_DigestFinal_ex(&ctx,&(md[0]),NULL);
-	ret=(	((unsigned long)md[0]     )|((unsigned long)md[1]<<8L)|
-		((unsigned long)md[2]<<16L)|((unsigned long)md[3]<<24L)
-		)&0xffffffffL;
-	EVP_MD_CTX_cleanup(&ctx);
-	return(ret);
-	}
-#endif
-	
-int X509_issuer_name_cmp(const X509 *a, const X509 *b)
-	{
-	return(X509_NAME_cmp(a->cert_info->issuer,b->cert_info->issuer));
-	}
-
-int X509_subject_name_cmp(const X509 *a, const X509 *b)
-	{
-	return(X509_NAME_cmp(a->cert_info->subject,b->cert_info->subject));
-	}
-
-int X509_CRL_cmp(const X509_CRL *a, const X509_CRL *b)
-	{
-	return(X509_NAME_cmp(a->crl->issuer,b->crl->issuer));
-	}
-
-X509_NAME *X509_get_issuer_name(X509 *a)
-	{
-	return(a->cert_info->issuer);
-	}
-
-unsigned long X509_issuer_name_hash(X509 *x)
-	{
-	return(X509_NAME_hash(x->cert_info->issuer));
-	}
-
-X509_NAME *X509_get_subject_name(X509 *a)
-	{
-	return(a->cert_info->subject);
-	}
-
-ASN1_INTEGER *X509_get_serialNumber(X509 *a)
-	{
-	return(a->cert_info->serialNumber);
-	}
-
-unsigned long X509_subject_name_hash(X509 *x)
-	{
-	return(X509_NAME_hash(x->cert_info->subject));
-	}
-
-#ifndef OPENSSL_NO_SHA
-/* Compare two certificates: they must be identical for
- * this to work. NB: Although "cmp" operations are generally
- * prototyped to take "const" arguments (eg. for use in
- * STACKs), the way X509 handling is - these operations may
- * involve ensuring the hashes are up-to-date and ensuring
- * certain cert information is cached. So this is the point
- * where the "depth-first" constification tree has to halt
- * with an evil cast.
- */
-int X509_cmp(const X509 *a, const X509 *b)
-{
-	/* ensure hash is valid */
-	X509_check_purpose((X509 *)a, -1, 0);
-	X509_check_purpose((X509 *)b, -1, 0);
-
-	return memcmp(a->sha1_hash, b->sha1_hash, SHA_DIGEST_LENGTH);
-}
-#endif
-
-
-/* Case insensitive string comparision */
-static int nocase_cmp(const ASN1_STRING *a, const ASN1_STRING *b)
-{
-	int i;
-
-	if (a->length != b->length)
-		return (a->length - b->length);
-
-	for (i=0; i<a->length; i++)
-	{
-		int ca, cb;
-
-		ca = tolower(a->data[i]);
-		cb = tolower(b->data[i]);
-
-		if (ca != cb)
-			return(ca-cb);
-	}
-	return 0;
-}
-
-/* Case insensitive string comparision with space normalization 
- * Space normalization - ignore leading, trailing spaces, 
- *       multiple spaces between characters are replaced by single space  
- */
-static int nocase_spacenorm_cmp(const ASN1_STRING *a, const ASN1_STRING *b)
-{
-	unsigned char *pa = NULL, *pb = NULL;
-	int la, lb;
-	
-	la = a->length;
-	lb = b->length;
-	pa = a->data;
-	pb = b->data;
-
-	/* skip leading spaces */
-	while (la > 0 && isspace(*pa))
-	{
-		la--;
-		pa++;
-	}
-	while (lb > 0 && isspace(*pb))
-	{
-		lb--;
-		pb++;
-	}
-
-	/* skip trailing spaces */
-	while (la > 0 && isspace(pa[la-1]))
-		la--;
-	while (lb > 0 && isspace(pb[lb-1]))
-		lb--;
-
-	/* compare strings with space normalization */
-	while (la > 0 && lb > 0)
-	{
-		int ca, cb;
-
-		/* compare character */
-		ca = tolower(*pa);
-		cb = tolower(*pb);
-		if (ca != cb)
-			return (ca - cb);
-
-		pa++; pb++;
-		la--; lb--;
-
-		if (la <= 0 || lb <= 0)
-			break;
-
-		/* is white space next character ? */
-		if (isspace(*pa) && isspace(*pb))
-		{
-			/* skip remaining white spaces */
-			while (la > 0 && isspace(*pa))
-			{
-				la--;
-				pa++;
-			}
-			while (lb > 0 && isspace(*pb))
-			{
-				lb--;
-				pb++;
-			}
-		}
-	}
-	if (la > 0 || lb > 0)
-		return la - lb;
-
-	return 0;
-}
-
-static int asn1_string_memcmp(ASN1_STRING *a, ASN1_STRING *b)
-	{
-	int j;
-	j = a->length - b->length;
-	if (j)
-		return j;
-	return memcmp(a->data, b->data, a->length);
-	}
-
-#define STR_TYPE_CMP (B_ASN1_PRINTABLESTRING|B_ASN1_T61STRING|B_ASN1_UTF8STRING)
-
-int X509_NAME_cmp(const X509_NAME *a, const X509_NAME *b)
-	{
-	int i,j;
-	X509_NAME_ENTRY *na,*nb;
-
-	unsigned long nabit, nbbit;
-
-	j = sk_X509_NAME_ENTRY_num(a->entries)
-		  - sk_X509_NAME_ENTRY_num(b->entries);
-	if (j)
-		return j;
-	for (i=sk_X509_NAME_ENTRY_num(a->entries)-1; i>=0; i--)
-		{
-		na=sk_X509_NAME_ENTRY_value(a->entries,i);
-		nb=sk_X509_NAME_ENTRY_value(b->entries,i);
-		j=na->value->type-nb->value->type;
-		if (j)
-			{
-			nabit = ASN1_tag2bit(na->value->type);
-			nbbit = ASN1_tag2bit(nb->value->type);
-			if (!(nabit & STR_TYPE_CMP) ||
-				!(nbbit & STR_TYPE_CMP))
-				return j;
-			j = asn1_string_memcmp(na->value, nb->value);
-			}
-		else if (na->value->type == V_ASN1_PRINTABLESTRING)
-			j=nocase_spacenorm_cmp(na->value, nb->value);
-		else if (na->value->type == V_ASN1_IA5STRING
-			&& OBJ_obj2nid(na->object) == NID_pkcs9_emailAddress)
-			j=nocase_cmp(na->value, nb->value);
-		else
-			j = asn1_string_memcmp(na->value, nb->value);
-		if (j) return(j);
-		j=na->set-nb->set;
-		if (j) return(j);
-		}
-
-	/* We will check the object types after checking the values
-	 * since the values will more often be different than the object
-	 * types. */
-	for (i=sk_X509_NAME_ENTRY_num(a->entries)-1; i>=0; i--)
-		{
-		na=sk_X509_NAME_ENTRY_value(a->entries,i);
-		nb=sk_X509_NAME_ENTRY_value(b->entries,i);
-		j=OBJ_cmp(na->object,nb->object);
-		if (j) return(j);
-		}
-	return(0);
-	}
-
-#ifndef OPENSSL_NO_MD5
-/* I now DER encode the name and hash it.  Since I cache the DER encoding,
- * this is reasonably efficient. */
-unsigned long X509_NAME_hash(X509_NAME *x)
-	{
-	unsigned long ret=0;
-	unsigned char md[16];
-
-	/* Make sure X509_NAME structure contains valid cached encoding */
-	i2d_X509_NAME(x,NULL);
-	EVP_Digest(x->bytes->data, x->bytes->length, md, NULL, EVP_md5(), NULL);
-
-	ret=(	((unsigned long)md[0]     )|((unsigned long)md[1]<<8L)|
-		((unsigned long)md[2]<<16L)|((unsigned long)md[3]<<24L)
-		)&0xffffffffL;
-	return(ret);
-	}
-#endif
-
-/* Search a stack of X509 for a match */
-X509 *X509_find_by_issuer_and_serial(STACK_OF(X509) *sk, X509_NAME *name,
-		ASN1_INTEGER *serial)
-	{
-	int i;
-	X509_CINF cinf;
-	X509 x,*x509=NULL;
-
-	if(!sk) return NULL;
-
-	x.cert_info= &cinf;
-	cinf.serialNumber=serial;
-	cinf.issuer=name;
-
-	for (i=0; i<sk_X509_num(sk); i++)
-		{
-		x509=sk_X509_value(sk,i);
-		if (X509_issuer_and_serial_cmp(x509,&x) == 0)
-			return(x509);
-		}
-	return(NULL);
-	}
-
-X509 *X509_find_by_subject(STACK_OF(X509) *sk, X509_NAME *name)
-	{
-	X509 *x509;
-	int i;
-
-	for (i=0; i<sk_X509_num(sk); i++)
-		{
-		x509=sk_X509_value(sk,i);
-		if (X509_NAME_cmp(X509_get_subject_name(x509),name) == 0)
-			return(x509);
-		}
-	return(NULL);
-	}
-
-EVP_PKEY *X509_get_pubkey(X509 *x)
-	{
-	if ((x == NULL) || (x->cert_info == NULL))
-		return(NULL);
-	return(X509_PUBKEY_get(x->cert_info->key));
-	}
-
-ASN1_BIT_STRING *X509_get0_pubkey_bitstr(const X509 *x)
-	{
-	if(!x) return NULL;
-	return x->cert_info->key->public_key;
-	}
-
-int X509_check_private_key(X509 *x, EVP_PKEY *k)
-	{
-	EVP_PKEY *xk=NULL;
-	int ok=0;
-
-	xk=X509_get_pubkey(x);
-	switch (EVP_PKEY_cmp(xk, k))
-		{
-	case 1:
-		ok=1;
-		break;
-	case 0:
-		X509err(X509_F_X509_CHECK_PRIVATE_KEY,X509_R_KEY_VALUES_MISMATCH);
-		break;
-	case -1:
-		X509err(X509_F_X509_CHECK_PRIVATE_KEY,X509_R_KEY_TYPE_MISMATCH);
-		break;
-	case -2:
-#ifndef OPENSSL_NO_EC
-		if (k->type == EVP_PKEY_EC)
-			{
-			X509err(X509_F_X509_CHECK_PRIVATE_KEY, ERR_R_EC_LIB);
-			break;
-			}
-#endif
-#ifndef OPENSSL_NO_DH
-		if (k->type == EVP_PKEY_DH)
-			{
-			/* No idea */
-			X509err(X509_F_X509_CHECK_PRIVATE_KEY,X509_R_CANT_CHECK_DH_KEY);
-			break;
-			}
-#endif
-	        X509err(X509_F_X509_CHECK_PRIVATE_KEY,X509_R_UNKNOWN_KEY_TYPE);
-		}
-
-	EVP_PKEY_free(xk);
-	return(ok);
-	}
diff --git a/crypto/openssl/crypto/x509/x509_d2.c b/crypto/openssl/crypto/x509/x509_d2.c
deleted file mode 100644
index 51410cfd1a93..000000000000
--- a/crypto/openssl/crypto/x509/x509_d2.c
+++ /dev/null
@@ -1,107 +0,0 @@
-/* crypto/x509/x509_d2.c */
-/* Copyright (C) 1995-1998 Eric Young (eay@cryptsoft.com)
- * All rights reserved.
- *
- * This package is an SSL implementation written
- * by Eric Young (eay@cryptsoft.com).
- * The implementation was written so as to conform with Netscapes SSL.
- * 
- * This library is free for commercial and non-commercial use as long as
- * the following conditions are aheared to.  The following conditions
- * apply to all code found in this distribution, be it the RC4, RSA,
- * lhash, DES, etc., code; not just the SSL code.  The SSL documentation
- * included with this distribution is covered by the same copyright terms
- * except that the holder is Tim Hudson (tjh@cryptsoft.com).
- * 
- * Copyright remains Eric Young's, and as such any Copyright notices in
- * the code are not to be removed.
- * If this package is used in a product, Eric Young should be given attribution
- * as the author of the parts of the library used.
- * This can be in the form of a textual message at program startup or
- * in documentation (online or textual) provided with the package.
- * 
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions
- * are met:
- * 1. Redistributions of source code must retain the copyright
- *    notice, this list of conditions and the following disclaimer.
- * 2. Redistributions in binary form must reproduce the above copyright
- *    notice, this list of conditions and the following disclaimer in the
- *    documentation and/or other materials provided with the distribution.
- * 3. All advertising materials mentioning features or use of this software
- *    must display the following acknowledgement:
- *    "This product includes cryptographic software written by
- *     Eric Young (eay@cryptsoft.com)"
- *    The word 'cryptographic' can be left out if the rouines from the library
- *    being used are not cryptographic related :-).
- * 4. If you include any Windows specific code (or a derivative thereof) from 
- *    the apps directory (application code) you must include an acknowledgement:
- *    "This product includes software written by Tim Hudson (tjh@cryptsoft.com)"
- * 
- * THIS SOFTWARE IS PROVIDED BY ERIC YOUNG ``AS IS'' AND
- * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
- * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
- * ARE DISCLAIMED.  IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE
- * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
- * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
- * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
- * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
- * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
- * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
- * SUCH DAMAGE.
- * 
- * The licence and distribution terms for any publically available version or
- * derivative of this code cannot be changed.  i.e. this code cannot simply be
- * copied and put under another distribution licence
- * [including the GNU Public Licence.]
- */
-
-#include <stdio.h>
-#include "cryptlib.h"
-#include <openssl/crypto.h>
-#include <openssl/x509.h>
-
-#ifndef OPENSSL_NO_STDIO
-int X509_STORE_set_default_paths(X509_STORE *ctx)
-	{
-	X509_LOOKUP *lookup;
-
-	lookup=X509_STORE_add_lookup(ctx,X509_LOOKUP_file());
-	if (lookup == NULL) return(0);
-	X509_LOOKUP_load_file(lookup,NULL,X509_FILETYPE_DEFAULT);
-
-	lookup=X509_STORE_add_lookup(ctx,X509_LOOKUP_hash_dir());
-	if (lookup == NULL) return(0);
-	X509_LOOKUP_add_dir(lookup,NULL,X509_FILETYPE_DEFAULT);
-	
-	/* clear any errors */
-	ERR_clear_error();
-
-	return(1);
-	}
-
-int X509_STORE_load_locations(X509_STORE *ctx, const char *file,
-		const char *path)
-	{
-	X509_LOOKUP *lookup;
-
-	if (file != NULL)
-		{
-		lookup=X509_STORE_add_lookup(ctx,X509_LOOKUP_file());
-		if (lookup == NULL) return(0);
-		if (X509_LOOKUP_load_file(lookup,file,X509_FILETYPE_PEM) != 1)
-		    return(0);
-		}
-	if (path != NULL)
-		{
-		lookup=X509_STORE_add_lookup(ctx,X509_LOOKUP_hash_dir());
-		if (lookup == NULL) return(0);
-		if (X509_LOOKUP_add_dir(lookup,path,X509_FILETYPE_PEM) != 1)
-		    return(0);
-		}
-	if ((path == NULL) && (file == NULL))
-		return(0);
-	return(1);
-	}
-
-#endif
diff --git a/crypto/openssl/crypto/x509/x509_def.c b/crypto/openssl/crypto/x509/x509_def.c
deleted file mode 100644
index e0ac151a768c..000000000000
--- a/crypto/openssl/crypto/x509/x509_def.c
+++ /dev/null
@@ -1,81 +0,0 @@
-/* crypto/x509/x509_def.c */
-/* Copyright (C) 1995-1998 Eric Young (eay@cryptsoft.com)
- * All rights reserved.
- *
- * This package is an SSL implementation written
- * by Eric Young (eay@cryptsoft.com).
- * The implementation was written so as to conform with Netscapes SSL.
- * 
- * This library is free for commercial and non-commercial use as long as
- * the following conditions are aheared to.  The following conditions
- * apply to all code found in this distribution, be it the RC4, RSA,
- * lhash, DES, etc., code; not just the SSL code.  The SSL documentation
- * included with this distribution is covered by the same copyright terms
- * except that the holder is Tim Hudson (tjh@cryptsoft.com).
- * 
- * Copyright remains Eric Young's, and as such any Copyright notices in
- * the code are not to be removed.
- * If this package is used in a product, Eric Young should be given attribution
- * as the author of the parts of the library used.
- * This can be in the form of a textual message at program startup or
- * in documentation (online or textual) provided with the package.
- * 
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions
- * are met:
- * 1. Redistributions of source code must retain the copyright
- *    notice, this list of conditions and the following disclaimer.
- * 2. Redistributions in binary form must reproduce the above copyright
- *    notice, this list of conditions and the following disclaimer in the
- *    documentation and/or other materials provided with the distribution.
- * 3. All advertising materials mentioning features or use of this software
- *    must display the following acknowledgement:
- *    "This product includes cryptographic software written by
- *     Eric Young (eay@cryptsoft.com)"
- *    The word 'cryptographic' can be left out if the rouines from the library
- *    being used are not cryptographic related :-).
- * 4. If you include any Windows specific code (or a derivative thereof) from 
- *    the apps directory (application code) you must include an acknowledgement:
- *    "This product includes software written by Tim Hudson (tjh@cryptsoft.com)"
- * 
- * THIS SOFTWARE IS PROVIDED BY ERIC YOUNG ``AS IS'' AND
- * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
- * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
- * ARE DISCLAIMED.  IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE
- * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
- * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
- * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
- * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
- * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
- * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
- * SUCH DAMAGE.
- * 
- * The licence and distribution terms for any publically available version or
- * derivative of this code cannot be changed.  i.e. this code cannot simply be
- * copied and put under another distribution licence
- * [including the GNU Public Licence.]
- */
-
-#include <stdio.h>
-#include "cryptlib.h"
-#include <openssl/crypto.h>
-#include <openssl/x509.h>
-
-const char *X509_get_default_private_dir(void)
-	{ return(X509_PRIVATE_DIR); }
-	
-const char *X509_get_default_cert_area(void)
-	{ return(X509_CERT_AREA); }
-
-const char *X509_get_default_cert_dir(void)
-	{ return(X509_CERT_DIR); }
-
-const char *X509_get_default_cert_file(void)
-	{ return(X509_CERT_FILE); }
-
-const char *X509_get_default_cert_dir_env(void)
-	{ return(X509_CERT_DIR_EVP); }
-
-const char *X509_get_default_cert_file_env(void)
-	{ return(X509_CERT_FILE_EVP); }
-
diff --git a/crypto/openssl/crypto/x509/x509_err.c b/crypto/openssl/crypto/x509/x509_err.c
deleted file mode 100644
index fb377292dac5..000000000000
--- a/crypto/openssl/crypto/x509/x509_err.c
+++ /dev/null
@@ -1,161 +0,0 @@
-/* crypto/x509/x509_err.c */
-/* ====================================================================
- * Copyright (c) 1999-2005 The OpenSSL Project.  All rights reserved.
- *
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions
- * are met:
- *
- * 1. Redistributions of source code must retain the above copyright
- *    notice, this list of conditions and the following disclaimer. 
- *
- * 2. Redistributions in binary form must reproduce the above copyright
- *    notice, this list of conditions and the following disclaimer in
- *    the documentation and/or other materials provided with the
- *    distribution.
- *
- * 3. All advertising materials mentioning features or use of this
- *    software must display the following acknowledgment:
- *    "This product includes software developed by the OpenSSL Project
- *    for use in the OpenSSL Toolkit. (http://www.OpenSSL.org/)"
- *
- * 4. The names "OpenSSL Toolkit" and "OpenSSL Project" must not be used to
- *    endorse or promote products derived from this software without
- *    prior written permission. For written permission, please contact
- *    openssl-core@OpenSSL.org.
- *
- * 5. Products derived from this software may not be called "OpenSSL"
- *    nor may "OpenSSL" appear in their names without prior written
- *    permission of the OpenSSL Project.
- *
- * 6. Redistributions of any form whatsoever must retain the following
- *    acknowledgment:
- *    "This product includes software developed by the OpenSSL Project
- *    for use in the OpenSSL Toolkit (http://www.OpenSSL.org/)"
- *
- * THIS SOFTWARE IS PROVIDED BY THE OpenSSL PROJECT ``AS IS'' AND ANY
- * EXPRESSED OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
- * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR
- * PURPOSE ARE DISCLAIMED.  IN NO EVENT SHALL THE OpenSSL PROJECT OR
- * ITS CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
- * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
- * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
- * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
- * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
- * STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
- * ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED
- * OF THE POSSIBILITY OF SUCH DAMAGE.
- * ====================================================================
- *
- * This product includes cryptographic software written by Eric Young
- * (eay@cryptsoft.com).  This product includes software written by Tim
- * Hudson (tjh@cryptsoft.com).
- *
- */
-
-/* NOTE: this file was auto generated by the mkerr.pl script: any changes
- * made to it will be overwritten when the script next updates this file,
- * only reason strings will be preserved.
- */
-
-#include <stdio.h>
-#include <openssl/err.h>
-#include <openssl/x509.h>
-
-/* BEGIN ERROR CODES */
-#ifndef OPENSSL_NO_ERR
-
-#define ERR_FUNC(func) ERR_PACK(ERR_LIB_X509,func,0)
-#define ERR_REASON(reason) ERR_PACK(ERR_LIB_X509,0,reason)
-
-static ERR_STRING_DATA X509_str_functs[]=
-	{
-{ERR_FUNC(X509_F_ADD_CERT_DIR),	"ADD_CERT_DIR"},
-{ERR_FUNC(X509_F_BY_FILE_CTRL),	"BY_FILE_CTRL"},
-{ERR_FUNC(X509_F_CHECK_POLICY),	"CHECK_POLICY"},
-{ERR_FUNC(X509_F_DIR_CTRL),	"DIR_CTRL"},
-{ERR_FUNC(X509_F_GET_CERT_BY_SUBJECT),	"GET_CERT_BY_SUBJECT"},
-{ERR_FUNC(X509_F_NETSCAPE_SPKI_B64_DECODE),	"NETSCAPE_SPKI_b64_decode"},
-{ERR_FUNC(X509_F_NETSCAPE_SPKI_B64_ENCODE),	"NETSCAPE_SPKI_b64_encode"},
-{ERR_FUNC(X509_F_X509AT_ADD1_ATTR),	"X509at_add1_attr"},
-{ERR_FUNC(X509_F_X509V3_ADD_EXT),	"X509v3_add_ext"},
-{ERR_FUNC(X509_F_X509_ATTRIBUTE_CREATE_BY_NID),	"X509_ATTRIBUTE_create_by_NID"},
-{ERR_FUNC(X509_F_X509_ATTRIBUTE_CREATE_BY_OBJ),	"X509_ATTRIBUTE_create_by_OBJ"},
-{ERR_FUNC(X509_F_X509_ATTRIBUTE_CREATE_BY_TXT),	"X509_ATTRIBUTE_create_by_txt"},
-{ERR_FUNC(X509_F_X509_ATTRIBUTE_GET0_DATA),	"X509_ATTRIBUTE_get0_data"},
-{ERR_FUNC(X509_F_X509_ATTRIBUTE_SET1_DATA),	"X509_ATTRIBUTE_set1_data"},
-{ERR_FUNC(X509_F_X509_CHECK_PRIVATE_KEY),	"X509_check_private_key"},
-{ERR_FUNC(X509_F_X509_CRL_PRINT_FP),	"X509_CRL_print_fp"},
-{ERR_FUNC(X509_F_X509_EXTENSION_CREATE_BY_NID),	"X509_EXTENSION_create_by_NID"},
-{ERR_FUNC(X509_F_X509_EXTENSION_CREATE_BY_OBJ),	"X509_EXTENSION_create_by_OBJ"},
-{ERR_FUNC(X509_F_X509_GET_PUBKEY_PARAMETERS),	"X509_get_pubkey_parameters"},
-{ERR_FUNC(X509_F_X509_LOAD_CERT_CRL_FILE),	"X509_load_cert_crl_file"},
-{ERR_FUNC(X509_F_X509_LOAD_CERT_FILE),	"X509_load_cert_file"},
-{ERR_FUNC(X509_F_X509_LOAD_CRL_FILE),	"X509_load_crl_file"},
-{ERR_FUNC(X509_F_X509_NAME_ADD_ENTRY),	"X509_NAME_add_entry"},
-{ERR_FUNC(X509_F_X509_NAME_ENTRY_CREATE_BY_NID),	"X509_NAME_ENTRY_create_by_NID"},
-{ERR_FUNC(X509_F_X509_NAME_ENTRY_CREATE_BY_TXT),	"X509_NAME_ENTRY_create_by_txt"},
-{ERR_FUNC(X509_F_X509_NAME_ENTRY_SET_OBJECT),	"X509_NAME_ENTRY_set_object"},
-{ERR_FUNC(X509_F_X509_NAME_ONELINE),	"X509_NAME_oneline"},
-{ERR_FUNC(X509_F_X509_NAME_PRINT),	"X509_NAME_print"},
-{ERR_FUNC(X509_F_X509_PRINT_EX_FP),	"X509_print_ex_fp"},
-{ERR_FUNC(X509_F_X509_PUBKEY_GET),	"X509_PUBKEY_get"},
-{ERR_FUNC(X509_F_X509_PUBKEY_SET),	"X509_PUBKEY_set"},
-{ERR_FUNC(X509_F_X509_REQ_CHECK_PRIVATE_KEY),	"X509_REQ_check_private_key"},
-{ERR_FUNC(X509_F_X509_REQ_PRINT_EX),	"X509_REQ_print_ex"},
-{ERR_FUNC(X509_F_X509_REQ_PRINT_FP),	"X509_REQ_print_fp"},
-{ERR_FUNC(X509_F_X509_REQ_TO_X509),	"X509_REQ_to_X509"},
-{ERR_FUNC(X509_F_X509_STORE_ADD_CERT),	"X509_STORE_add_cert"},
-{ERR_FUNC(X509_F_X509_STORE_ADD_CRL),	"X509_STORE_add_crl"},
-{ERR_FUNC(X509_F_X509_STORE_CTX_GET1_ISSUER),	"X509_STORE_CTX_get1_issuer"},
-{ERR_FUNC(X509_F_X509_STORE_CTX_INIT),	"X509_STORE_CTX_init"},
-{ERR_FUNC(X509_F_X509_STORE_CTX_NEW),	"X509_STORE_CTX_new"},
-{ERR_FUNC(X509_F_X509_STORE_CTX_PURPOSE_INHERIT),	"X509_STORE_CTX_purpose_inherit"},
-{ERR_FUNC(X509_F_X509_TO_X509_REQ),	"X509_to_X509_REQ"},
-{ERR_FUNC(X509_F_X509_TRUST_ADD),	"X509_TRUST_add"},
-{ERR_FUNC(X509_F_X509_TRUST_SET),	"X509_TRUST_set"},
-{ERR_FUNC(X509_F_X509_VERIFY_CERT),	"X509_verify_cert"},
-{0,NULL}
-	};
-
-static ERR_STRING_DATA X509_str_reasons[]=
-	{
-{ERR_REASON(X509_R_BAD_X509_FILETYPE)    ,"bad x509 filetype"},
-{ERR_REASON(X509_R_BASE64_DECODE_ERROR)  ,"base64 decode error"},
-{ERR_REASON(X509_R_CANT_CHECK_DH_KEY)    ,"cant check dh key"},
-{ERR_REASON(X509_R_CERT_ALREADY_IN_HASH_TABLE),"cert already in hash table"},
-{ERR_REASON(X509_R_ERR_ASN1_LIB)         ,"err asn1 lib"},
-{ERR_REASON(X509_R_INVALID_DIRECTORY)    ,"invalid directory"},
-{ERR_REASON(X509_R_INVALID_FIELD_NAME)   ,"invalid field name"},
-{ERR_REASON(X509_R_INVALID_TRUST)        ,"invalid trust"},
-{ERR_REASON(X509_R_KEY_TYPE_MISMATCH)    ,"key type mismatch"},
-{ERR_REASON(X509_R_KEY_VALUES_MISMATCH)  ,"key values mismatch"},
-{ERR_REASON(X509_R_LOADING_CERT_DIR)     ,"loading cert dir"},
-{ERR_REASON(X509_R_LOADING_DEFAULTS)     ,"loading defaults"},
-{ERR_REASON(X509_R_NO_CERT_SET_FOR_US_TO_VERIFY),"no cert set for us to verify"},
-{ERR_REASON(X509_R_SHOULD_RETRY)         ,"should retry"},
-{ERR_REASON(X509_R_UNABLE_TO_FIND_PARAMETERS_IN_CHAIN),"unable to find parameters in chain"},
-{ERR_REASON(X509_R_UNABLE_TO_GET_CERTS_PUBLIC_KEY),"unable to get certs public key"},
-{ERR_REASON(X509_R_UNKNOWN_KEY_TYPE)     ,"unknown key type"},
-{ERR_REASON(X509_R_UNKNOWN_NID)          ,"unknown nid"},
-{ERR_REASON(X509_R_UNKNOWN_PURPOSE_ID)   ,"unknown purpose id"},
-{ERR_REASON(X509_R_UNKNOWN_TRUST_ID)     ,"unknown trust id"},
-{ERR_REASON(X509_R_UNSUPPORTED_ALGORITHM),"unsupported algorithm"},
-{ERR_REASON(X509_R_WRONG_LOOKUP_TYPE)    ,"wrong lookup type"},
-{ERR_REASON(X509_R_WRONG_TYPE)           ,"wrong type"},
-{0,NULL}
-	};
-
-#endif
-
-void ERR_load_X509_strings(void)
-	{
-#ifndef OPENSSL_NO_ERR
-
-	if (ERR_func_error_string(X509_str_functs[0].error) == NULL)
-		{
-		ERR_load_strings(0,X509_str_functs);
-		ERR_load_strings(0,X509_str_reasons);
-		}
-#endif
-	}
diff --git a/crypto/openssl/crypto/x509/x509_ext.c b/crypto/openssl/crypto/x509/x509_ext.c
deleted file mode 100644
index e7fdacb5e45a..000000000000
--- a/crypto/openssl/crypto/x509/x509_ext.c
+++ /dev/null
@@ -1,210 +0,0 @@
-/* crypto/x509/x509_ext.c */
-/* Copyright (C) 1995-1998 Eric Young (eay@cryptsoft.com)
- * All rights reserved.
- *
- * This package is an SSL implementation written
- * by Eric Young (eay@cryptsoft.com).
- * The implementation was written so as to conform with Netscapes SSL.
- * 
- * This library is free for commercial and non-commercial use as long as
- * the following conditions are aheared to.  The following conditions
- * apply to all code found in this distribution, be it the RC4, RSA,
- * lhash, DES, etc., code; not just the SSL code.  The SSL documentation
- * included with this distribution is covered by the same copyright terms
- * except that the holder is Tim Hudson (tjh@cryptsoft.com).
- * 
- * Copyright remains Eric Young's, and as such any Copyright notices in
- * the code are not to be removed.
- * If this package is used in a product, Eric Young should be given attribution
- * as the author of the parts of the library used.
- * This can be in the form of a textual message at program startup or
- * in documentation (online or textual) provided with the package.
- * 
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions
- * are met:
- * 1. Redistributions of source code must retain the copyright
- *    notice, this list of conditions and the following disclaimer.
- * 2. Redistributions in binary form must reproduce the above copyright
- *    notice, this list of conditions and the following disclaimer in the
- *    documentation and/or other materials provided with the distribution.
- * 3. All advertising materials mentioning features or use of this software
- *    must display the following acknowledgement:
- *    "This product includes cryptographic software written by
- *     Eric Young (eay@cryptsoft.com)"
- *    The word 'cryptographic' can be left out if the rouines from the library
- *    being used are not cryptographic related :-).
- * 4. If you include any Windows specific code (or a derivative thereof) from 
- *    the apps directory (application code) you must include an acknowledgement:
- *    "This product includes software written by Tim Hudson (tjh@cryptsoft.com)"
- * 
- * THIS SOFTWARE IS PROVIDED BY ERIC YOUNG ``AS IS'' AND
- * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
- * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
- * ARE DISCLAIMED.  IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE
- * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
- * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
- * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
- * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
- * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
- * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
- * SUCH DAMAGE.
- * 
- * The licence and distribution terms for any publically available version or
- * derivative of this code cannot be changed.  i.e. this code cannot simply be
- * copied and put under another distribution licence
- * [including the GNU Public Licence.]
- */
-
-#include <stdio.h>
-#include <openssl/stack.h>
-#include "cryptlib.h"
-#include <openssl/asn1.h>
-#include <openssl/objects.h>
-#include <openssl/evp.h>
-#include <openssl/x509.h>
-#include <openssl/x509v3.h>
-
-
-int X509_CRL_get_ext_count(X509_CRL *x)
-	{
-	return(X509v3_get_ext_count(x->crl->extensions));
-	}
-
-int X509_CRL_get_ext_by_NID(X509_CRL *x, int nid, int lastpos)
-	{
-	return(X509v3_get_ext_by_NID(x->crl->extensions,nid,lastpos));
-	}
-
-int X509_CRL_get_ext_by_OBJ(X509_CRL *x, ASN1_OBJECT *obj, int lastpos)
-	{
-	return(X509v3_get_ext_by_OBJ(x->crl->extensions,obj,lastpos));
-	}
-
-int X509_CRL_get_ext_by_critical(X509_CRL *x, int crit, int lastpos)
-	{
-	return(X509v3_get_ext_by_critical(x->crl->extensions,crit,lastpos));
-	}
-
-X509_EXTENSION *X509_CRL_get_ext(X509_CRL *x, int loc)
-	{
-	return(X509v3_get_ext(x->crl->extensions,loc));
-	}
-
-X509_EXTENSION *X509_CRL_delete_ext(X509_CRL *x, int loc)
-	{
-	return(X509v3_delete_ext(x->crl->extensions,loc));
-	}
-
-void *X509_CRL_get_ext_d2i(X509_CRL *x, int nid, int *crit, int *idx)
-{
-	return X509V3_get_d2i(x->crl->extensions, nid, crit, idx);
-}
-
-int X509_CRL_add1_ext_i2d(X509_CRL *x, int nid, void *value, int crit,
-							unsigned long flags)
-{
-	return X509V3_add1_i2d(&x->crl->extensions, nid, value, crit, flags);
-}
-
-int X509_CRL_add_ext(X509_CRL *x, X509_EXTENSION *ex, int loc)
-	{
-	return(X509v3_add_ext(&(x->crl->extensions),ex,loc) != NULL);
-	}
-
-int X509_get_ext_count(X509 *x)
-	{
-	return(X509v3_get_ext_count(x->cert_info->extensions));
-	}
-
-int X509_get_ext_by_NID(X509 *x, int nid, int lastpos)
-	{
-	return(X509v3_get_ext_by_NID(x->cert_info->extensions,nid,lastpos));
-	}
-
-int X509_get_ext_by_OBJ(X509 *x, ASN1_OBJECT *obj, int lastpos)
-	{
-	return(X509v3_get_ext_by_OBJ(x->cert_info->extensions,obj,lastpos));
-	}
-
-int X509_get_ext_by_critical(X509 *x, int crit, int lastpos)
-	{
-	return(X509v3_get_ext_by_critical(x->cert_info->extensions,crit,lastpos));
-	}
-
-X509_EXTENSION *X509_get_ext(X509 *x, int loc)
-	{
-	return(X509v3_get_ext(x->cert_info->extensions,loc));
-	}
-
-X509_EXTENSION *X509_delete_ext(X509 *x, int loc)
-	{
-	return(X509v3_delete_ext(x->cert_info->extensions,loc));
-	}
-
-int X509_add_ext(X509 *x, X509_EXTENSION *ex, int loc)
-	{
-	return(X509v3_add_ext(&(x->cert_info->extensions),ex,loc) != NULL);
-	}
-
-void *X509_get_ext_d2i(X509 *x, int nid, int *crit, int *idx)
-{
-	return X509V3_get_d2i(x->cert_info->extensions, nid, crit, idx);
-}
-
-int X509_add1_ext_i2d(X509 *x, int nid, void *value, int crit,
-							unsigned long flags)
-{
-	return X509V3_add1_i2d(&x->cert_info->extensions, nid, value, crit,
-							flags);
-}
-
-int X509_REVOKED_get_ext_count(X509_REVOKED *x)
-	{
-	return(X509v3_get_ext_count(x->extensions));
-	}
-
-int X509_REVOKED_get_ext_by_NID(X509_REVOKED *x, int nid, int lastpos)
-	{
-	return(X509v3_get_ext_by_NID(x->extensions,nid,lastpos));
-	}
-
-int X509_REVOKED_get_ext_by_OBJ(X509_REVOKED *x, ASN1_OBJECT *obj,
-	     int lastpos)
-	{
-	return(X509v3_get_ext_by_OBJ(x->extensions,obj,lastpos));
-	}
-
-int X509_REVOKED_get_ext_by_critical(X509_REVOKED *x, int crit, int lastpos)
-	{
-	return(X509v3_get_ext_by_critical(x->extensions,crit,lastpos));
-	}
-
-X509_EXTENSION *X509_REVOKED_get_ext(X509_REVOKED *x, int loc)
-	{
-	return(X509v3_get_ext(x->extensions,loc));
-	}
-
-X509_EXTENSION *X509_REVOKED_delete_ext(X509_REVOKED *x, int loc)
-	{
-	return(X509v3_delete_ext(x->extensions,loc));
-	}
-
-int X509_REVOKED_add_ext(X509_REVOKED *x, X509_EXTENSION *ex, int loc)
-	{
-	return(X509v3_add_ext(&(x->extensions),ex,loc) != NULL);
-	}
-
-void *X509_REVOKED_get_ext_d2i(X509_REVOKED *x, int nid, int *crit, int *idx)
-{
-	return X509V3_get_d2i(x->extensions, nid, crit, idx);
-}
-
-int X509_REVOKED_add1_ext_i2d(X509_REVOKED *x, int nid, void *value, int crit,
-							unsigned long flags)
-{
-	return X509V3_add1_i2d(&x->extensions, nid, value, crit, flags);
-}
-
-IMPLEMENT_STACK_OF(X509_EXTENSION)
-IMPLEMENT_ASN1_SET_OF(X509_EXTENSION)
diff --git a/crypto/openssl/crypto/x509/x509_lu.c b/crypto/openssl/crypto/x509/x509_lu.c
deleted file mode 100644
index cd2cfb6d855a..000000000000
--- a/crypto/openssl/crypto/x509/x509_lu.c
+++ /dev/null
@@ -1,567 +0,0 @@
-/* crypto/x509/x509_lu.c */
-/* Copyright (C) 1995-1998 Eric Young (eay@cryptsoft.com)
- * All rights reserved.
- *
- * This package is an SSL implementation written
- * by Eric Young (eay@cryptsoft.com).
- * The implementation was written so as to conform with Netscapes SSL.
- * 
- * This library is free for commercial and non-commercial use as long as
- * the following conditions are aheared to.  The following conditions
- * apply to all code found in this distribution, be it the RC4, RSA,
- * lhash, DES, etc., code; not just the SSL code.  The SSL documentation
- * included with this distribution is covered by the same copyright terms
- * except that the holder is Tim Hudson (tjh@cryptsoft.com).
- * 
- * Copyright remains Eric Young's, and as such any Copyright notices in
- * the code are not to be removed.
- * If this package is used in a product, Eric Young should be given attribution
- * as the author of the parts of the library used.
- * This can be in the form of a textual message at program startup or
- * in documentation (online or textual) provided with the package.
- * 
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions
- * are met:
- * 1. Redistributions of source code must retain the copyright
- *    notice, this list of conditions and the following disclaimer.
- * 2. Redistributions in binary form must reproduce the above copyright
- *    notice, this list of conditions and the following disclaimer in the
- *    documentation and/or other materials provided with the distribution.
- * 3. All advertising materials mentioning features or use of this software
- *    must display the following acknowledgement:
- *    "This product includes cryptographic software written by
- *     Eric Young (eay@cryptsoft.com)"
- *    The word 'cryptographic' can be left out if the rouines from the library
- *    being used are not cryptographic related :-).
- * 4. If you include any Windows specific code (or a derivative thereof) from 
- *    the apps directory (application code) you must include an acknowledgement:
- *    "This product includes software written by Tim Hudson (tjh@cryptsoft.com)"
- * 
- * THIS SOFTWARE IS PROVIDED BY ERIC YOUNG ``AS IS'' AND
- * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
- * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
- * ARE DISCLAIMED.  IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE
- * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
- * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
- * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
- * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
- * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
- * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
- * SUCH DAMAGE.
- * 
- * The licence and distribution terms for any publically available version or
- * derivative of this code cannot be changed.  i.e. this code cannot simply be
- * copied and put under another distribution licence
- * [including the GNU Public Licence.]
- */
-
-#include <stdio.h>
-#include "cryptlib.h"
-#include <openssl/lhash.h>
-#include <openssl/x509.h>
-#include <openssl/x509v3.h>
-
-X509_LOOKUP *X509_LOOKUP_new(X509_LOOKUP_METHOD *method)
-	{
-	X509_LOOKUP *ret;
-
-	ret=(X509_LOOKUP *)OPENSSL_malloc(sizeof(X509_LOOKUP));
-	if (ret == NULL) return NULL;
-
-	ret->init=0;
-	ret->skip=0;
-	ret->method=method;
-	ret->method_data=NULL;
-	ret->store_ctx=NULL;
-	if ((method->new_item != NULL) && !method->new_item(ret))
-		{
-		OPENSSL_free(ret);
-		return NULL;
-		}
-	return ret;
-	}
-
-void X509_LOOKUP_free(X509_LOOKUP *ctx)
-	{
-	if (ctx == NULL) return;
-	if (	(ctx->method != NULL) &&
-		(ctx->method->free != NULL))
-		ctx->method->free(ctx);
-	OPENSSL_free(ctx);
-	}
-
-int X509_LOOKUP_init(X509_LOOKUP *ctx)
-	{
-	if (ctx->method == NULL) return 0;
-	if (ctx->method->init != NULL)
-		return ctx->method->init(ctx);
-	else
-		return 1;
-	}
-
-int X509_LOOKUP_shutdown(X509_LOOKUP *ctx)
-	{
-	if (ctx->method == NULL) return 0;
-	if (ctx->method->shutdown != NULL)
-		return ctx->method->shutdown(ctx);
-	else
-		return 1;
-	}
-
-int X509_LOOKUP_ctrl(X509_LOOKUP *ctx, int cmd, const char *argc, long argl,
-	     char **ret)
-	{
-	if (ctx->method == NULL) return -1;
-	if (ctx->method->ctrl != NULL)
-		return ctx->method->ctrl(ctx,cmd,argc,argl,ret);
-	else
-		return 1;
-	}
-
-int X509_LOOKUP_by_subject(X509_LOOKUP *ctx, int type, X509_NAME *name,
-	     X509_OBJECT *ret)
-	{
-	if ((ctx->method == NULL) || (ctx->method->get_by_subject == NULL))
-		return X509_LU_FAIL;
-	if (ctx->skip) return 0;
-	return ctx->method->get_by_subject(ctx,type,name,ret);
-	}
-
-int X509_LOOKUP_by_issuer_serial(X509_LOOKUP *ctx, int type, X509_NAME *name,
-	     ASN1_INTEGER *serial, X509_OBJECT *ret)
-	{
-	if ((ctx->method == NULL) ||
-		(ctx->method->get_by_issuer_serial == NULL))
-		return X509_LU_FAIL;
-	return ctx->method->get_by_issuer_serial(ctx,type,name,serial,ret);
-	}
-
-int X509_LOOKUP_by_fingerprint(X509_LOOKUP *ctx, int type,
-	     unsigned char *bytes, int len, X509_OBJECT *ret)
-	{
-	if ((ctx->method == NULL) || (ctx->method->get_by_fingerprint == NULL))
-		return X509_LU_FAIL;
-	return ctx->method->get_by_fingerprint(ctx,type,bytes,len,ret);
-	}
-
-int X509_LOOKUP_by_alias(X509_LOOKUP *ctx, int type, char *str, int len,
-	     X509_OBJECT *ret)
-	{
-	if ((ctx->method == NULL) || (ctx->method->get_by_alias == NULL))
-		return X509_LU_FAIL;
-	return ctx->method->get_by_alias(ctx,type,str,len,ret);
-	}
-
-  
-static int x509_object_cmp(const X509_OBJECT * const *a, const X509_OBJECT * const *b)
-  	{
- 	int ret;
-
- 	ret=((*a)->type - (*b)->type);
- 	if (ret) return ret;
- 	switch ((*a)->type)
- 		{
- 	case X509_LU_X509:
- 		ret=X509_subject_name_cmp((*a)->data.x509,(*b)->data.x509);
- 		break;
- 	case X509_LU_CRL:
- 		ret=X509_CRL_cmp((*a)->data.crl,(*b)->data.crl);
- 		break;
-	default:
-		/* abort(); */
-		return 0;
-		}
-	return ret;
-	}
-
-X509_STORE *X509_STORE_new(void)
-	{
-	X509_STORE *ret;
-
-	if ((ret=(X509_STORE *)OPENSSL_malloc(sizeof(X509_STORE))) == NULL)
-		return NULL;
-	ret->objs = sk_X509_OBJECT_new(x509_object_cmp);
-	ret->cache=1;
-	ret->get_cert_methods=sk_X509_LOOKUP_new_null();
-	ret->verify=0;
-	ret->verify_cb=0;
-
-	if ((ret->param = X509_VERIFY_PARAM_new()) == NULL)
-		return NULL;
-
-	ret->get_issuer = 0;
-	ret->check_issued = 0;
-	ret->check_revocation = 0;
-	ret->get_crl = 0;
-	ret->check_crl = 0;
-	ret->cert_crl = 0;
-	ret->cleanup = 0;
-
-	CRYPTO_new_ex_data(CRYPTO_EX_INDEX_X509_STORE, ret, &ret->ex_data);
-	ret->references=1;
-	return ret;
-	}
-
-static void cleanup(X509_OBJECT *a)
-	{
-	if (a->type == X509_LU_X509)
-		{
-		X509_free(a->data.x509);
-		}
-	else if (a->type == X509_LU_CRL)
-		{
-		X509_CRL_free(a->data.crl);
-		}
-	else
-		{
-		/* abort(); */
-		}
-
-	OPENSSL_free(a);
-	}
-
-void X509_STORE_free(X509_STORE *vfy)
-	{
-	int i;
-	STACK_OF(X509_LOOKUP) *sk;
-	X509_LOOKUP *lu;
-
-	if (vfy == NULL)
-	    return;
-
-	sk=vfy->get_cert_methods;
-	for (i=0; i<sk_X509_LOOKUP_num(sk); i++)
-		{
-		lu=sk_X509_LOOKUP_value(sk,i);
-		X509_LOOKUP_shutdown(lu);
-		X509_LOOKUP_free(lu);
-		}
-	sk_X509_LOOKUP_free(sk);
-	sk_X509_OBJECT_pop_free(vfy->objs, cleanup);
-
-	CRYPTO_free_ex_data(CRYPTO_EX_INDEX_X509_STORE, vfy, &vfy->ex_data);
-	if (vfy->param)
-		X509_VERIFY_PARAM_free(vfy->param);
-	OPENSSL_free(vfy);
-	}
-
-X509_LOOKUP *X509_STORE_add_lookup(X509_STORE *v, X509_LOOKUP_METHOD *m)
-	{
-	int i;
-	STACK_OF(X509_LOOKUP) *sk;
-	X509_LOOKUP *lu;
-
-	sk=v->get_cert_methods;
-	for (i=0; i<sk_X509_LOOKUP_num(sk); i++)
-		{
-		lu=sk_X509_LOOKUP_value(sk,i);
-		if (m == lu->method)
-			{
-			return lu;
-			}
-		}
-	/* a new one */
-	lu=X509_LOOKUP_new(m);
-	if (lu == NULL)
-		return NULL;
-	else
-		{
-		lu->store_ctx=v;
-		if (sk_X509_LOOKUP_push(v->get_cert_methods,lu))
-			return lu;
-		else
-			{
-			X509_LOOKUP_free(lu);
-			return NULL;
-			}
-		}
-	}
-
-int X509_STORE_get_by_subject(X509_STORE_CTX *vs, int type, X509_NAME *name,
-	     X509_OBJECT *ret)
-	{
-	X509_STORE *ctx=vs->ctx;
-	X509_LOOKUP *lu;
-	X509_OBJECT stmp,*tmp;
-	int i,j;
-
-	tmp=X509_OBJECT_retrieve_by_subject(ctx->objs,type,name);
-
-	if (tmp == NULL)
-		{
-		for (i=vs->current_method; i<sk_X509_LOOKUP_num(ctx->get_cert_methods); i++)
-			{
-			lu=sk_X509_LOOKUP_value(ctx->get_cert_methods,i);
-			j=X509_LOOKUP_by_subject(lu,type,name,&stmp);
-			if (j < 0)
-				{
-				vs->current_method=j;
-				return j;
-				}
-			else if (j)
-				{
-				tmp= &stmp;
-				break;
-				}
-			}
-		vs->current_method=0;
-		if (tmp == NULL)
-			return 0;
-		}
-
-/*	if (ret->data.ptr != NULL)
-		X509_OBJECT_free_contents(ret); */
-
-	ret->type=tmp->type;
-	ret->data.ptr=tmp->data.ptr;
-
-	X509_OBJECT_up_ref_count(ret);
-
-	return 1;
-	}
-
-int X509_STORE_add_cert(X509_STORE *ctx, X509 *x)
-	{
-	X509_OBJECT *obj;
-	int ret=1;
-
-	if (x == NULL) return 0;
-	obj=(X509_OBJECT *)OPENSSL_malloc(sizeof(X509_OBJECT));
-	if (obj == NULL)
-		{
-		X509err(X509_F_X509_STORE_ADD_CERT,ERR_R_MALLOC_FAILURE);
-		return 0;
-		}
-	obj->type=X509_LU_X509;
-	obj->data.x509=x;
-
-	CRYPTO_w_lock(CRYPTO_LOCK_X509_STORE);
-
-	X509_OBJECT_up_ref_count(obj);
-
-
-	if (X509_OBJECT_retrieve_match(ctx->objs, obj))
-		{
-		X509_OBJECT_free_contents(obj);
-		OPENSSL_free(obj);
-		X509err(X509_F_X509_STORE_ADD_CERT,X509_R_CERT_ALREADY_IN_HASH_TABLE);
-		ret=0;
-		} 
-	else sk_X509_OBJECT_push(ctx->objs, obj);
-
-	CRYPTO_w_unlock(CRYPTO_LOCK_X509_STORE);
-
-	return ret;
-	}
-
-int X509_STORE_add_crl(X509_STORE *ctx, X509_CRL *x)
-	{
-	X509_OBJECT *obj;
-	int ret=1;
-
-	if (x == NULL) return 0;
-	obj=(X509_OBJECT *)OPENSSL_malloc(sizeof(X509_OBJECT));
-	if (obj == NULL)
-		{
-		X509err(X509_F_X509_STORE_ADD_CRL,ERR_R_MALLOC_FAILURE);
-		return 0;
-		}
-	obj->type=X509_LU_CRL;
-	obj->data.crl=x;
-
-	CRYPTO_w_lock(CRYPTO_LOCK_X509_STORE);
-
-	X509_OBJECT_up_ref_count(obj);
-
-	if (X509_OBJECT_retrieve_match(ctx->objs, obj))
-		{
-		X509_OBJECT_free_contents(obj);
-		OPENSSL_free(obj);
-		X509err(X509_F_X509_STORE_ADD_CRL,X509_R_CERT_ALREADY_IN_HASH_TABLE);
-		ret=0;
-		}
-	else sk_X509_OBJECT_push(ctx->objs, obj);
-
-	CRYPTO_w_unlock(CRYPTO_LOCK_X509_STORE);
-
-	return ret;
-	}
-
-void X509_OBJECT_up_ref_count(X509_OBJECT *a)
-	{
-	switch (a->type)
-		{
-	case X509_LU_X509:
-		CRYPTO_add(&a->data.x509->references,1,CRYPTO_LOCK_X509);
-		break;
-	case X509_LU_CRL:
-		CRYPTO_add(&a->data.crl->references,1,CRYPTO_LOCK_X509_CRL);
-		break;
-		}
-	}
-
-void X509_OBJECT_free_contents(X509_OBJECT *a)
-	{
-	switch (a->type)
-		{
-	case X509_LU_X509:
-		X509_free(a->data.x509);
-		break;
-	case X509_LU_CRL:
-		X509_CRL_free(a->data.crl);
-		break;
-		}
-	}
-
-int X509_OBJECT_idx_by_subject(STACK_OF(X509_OBJECT) *h, int type,
-	     X509_NAME *name)
-	{
-	X509_OBJECT stmp;
-	X509 x509_s;
-	X509_CINF cinf_s;
-	X509_CRL crl_s;
-	X509_CRL_INFO crl_info_s;
-
-	stmp.type=type;
-	switch (type)
-		{
-	case X509_LU_X509:
-		stmp.data.x509= &x509_s;
-		x509_s.cert_info= &cinf_s;
-		cinf_s.subject=name;
-		break;
-	case X509_LU_CRL:
-		stmp.data.crl= &crl_s;
-		crl_s.crl= &crl_info_s;
-		crl_info_s.issuer=name;
-		break;
-	default:
-		/* abort(); */
-		return -1;
-		}
-
-	return sk_X509_OBJECT_find(h,&stmp);
-	}
-
-X509_OBJECT *X509_OBJECT_retrieve_by_subject(STACK_OF(X509_OBJECT) *h, int type,
-	     X509_NAME *name)
-{
-	int idx;
-	idx = X509_OBJECT_idx_by_subject(h, type, name);
-	if (idx==-1) return NULL;
-	return sk_X509_OBJECT_value(h, idx);
-}
-
-X509_OBJECT *X509_OBJECT_retrieve_match(STACK_OF(X509_OBJECT) *h, X509_OBJECT *x)
-{
-	int idx, i;
-	X509_OBJECT *obj;
-	idx = sk_X509_OBJECT_find(h, x);
-	if (idx == -1) return NULL;
-	if (x->type != X509_LU_X509) return sk_X509_OBJECT_value(h, idx);
-	for (i = idx; i < sk_X509_OBJECT_num(h); i++)
-		{
-		obj = sk_X509_OBJECT_value(h, i);
-		if (x509_object_cmp((const X509_OBJECT **)&obj, (const X509_OBJECT **)&x))
-			return NULL;
-		if ((x->type != X509_LU_X509) || !X509_cmp(obj->data.x509, x->data.x509))
-			return obj;
-		}
-	return NULL;
-}
-
-
-/* Try to get issuer certificate from store. Due to limitations
- * of the API this can only retrieve a single certificate matching
- * a given subject name. However it will fill the cache with all
- * matching certificates, so we can examine the cache for all 
- * matches.
- *
- * Return values are:
- *  1 lookup successful.
- *  0 certificate not found.
- * -1 some other error.
- */
-
-
-int X509_STORE_CTX_get1_issuer(X509 **issuer, X509_STORE_CTX *ctx, X509 *x)
-{
-	X509_NAME *xn;
-	X509_OBJECT obj, *pobj;
-	int i, ok, idx;
-	xn=X509_get_issuer_name(x);
-	ok=X509_STORE_get_by_subject(ctx,X509_LU_X509,xn,&obj);
-	if (ok != X509_LU_X509)
-		{
-		if (ok == X509_LU_RETRY)
-			{
-			X509_OBJECT_free_contents(&obj);
-			X509err(X509_F_X509_STORE_CTX_GET1_ISSUER,X509_R_SHOULD_RETRY);
-			return -1;
-			}
-		else if (ok != X509_LU_FAIL)
-			{
-			X509_OBJECT_free_contents(&obj);
-			/* not good :-(, break anyway */
-			return -1;
-			}
-		return 0;
-		}
-	/* If certificate matches all OK */
-	if (ctx->check_issued(ctx, x, obj.data.x509))
-		{
-		*issuer = obj.data.x509;
-		return 1;
-		}
-	X509_OBJECT_free_contents(&obj);
-	/* Else find index of first matching cert */
-	idx = X509_OBJECT_idx_by_subject(ctx->ctx->objs, X509_LU_X509, xn);
-	/* This shouldn't normally happen since we already have one match */
-	if (idx == -1) return 0;
-
-	/* Look through all matching certificates for a suitable issuer */
-	for (i = idx; i < sk_X509_OBJECT_num(ctx->ctx->objs); i++)
-		{
-		pobj = sk_X509_OBJECT_value(ctx->ctx->objs, i);
-		/* See if we've ran out of matches */
-		if (pobj->type != X509_LU_X509) return 0;
-		if (X509_NAME_cmp(xn, X509_get_subject_name(pobj->data.x509))) return 0;
-		if (ctx->check_issued(ctx, x, pobj->data.x509))
-			{
-			*issuer = pobj->data.x509;
-			X509_OBJECT_up_ref_count(pobj);
-			return 1;
-			}
-		}
-	return 0;
-}
-
-int X509_STORE_set_flags(X509_STORE *ctx, unsigned long flags)
-	{
-	return X509_VERIFY_PARAM_set_flags(ctx->param, flags);
-	}
-
-int X509_STORE_set_depth(X509_STORE *ctx, int depth)
-	{
-	X509_VERIFY_PARAM_set_depth(ctx->param, depth);
-	return 1;
-	}
-
-int X509_STORE_set_purpose(X509_STORE *ctx, int purpose)
-	{
-	return X509_VERIFY_PARAM_set_purpose(ctx->param, purpose);
-	}
-
-int X509_STORE_set_trust(X509_STORE *ctx, int trust)
-	{
-	return X509_VERIFY_PARAM_set_trust(ctx->param, trust);
-	}
-
-int X509_STORE_set1_param(X509_STORE *ctx, X509_VERIFY_PARAM *param)
-	{
-	return X509_VERIFY_PARAM_set1(ctx->param, param);
-	}
-
-IMPLEMENT_STACK_OF(X509_LOOKUP)
-IMPLEMENT_STACK_OF(X509_OBJECT)
diff --git a/crypto/openssl/crypto/x509/x509_obj.c b/crypto/openssl/crypto/x509/x509_obj.c
deleted file mode 100644
index 1e718f76eb2d..000000000000
--- a/crypto/openssl/crypto/x509/x509_obj.c
+++ /dev/null
@@ -1,226 +0,0 @@
-/* crypto/x509/x509_obj.c */
-/* Copyright (C) 1995-1998 Eric Young (eay@cryptsoft.com)
- * All rights reserved.
- *
- * This package is an SSL implementation written
- * by Eric Young (eay@cryptsoft.com).
- * The implementation was written so as to conform with Netscapes SSL.
- * 
- * This library is free for commercial and non-commercial use as long as
- * the following conditions are aheared to.  The following conditions
- * apply to all code found in this distribution, be it the RC4, RSA,
- * lhash, DES, etc., code; not just the SSL code.  The SSL documentation
- * included with this distribution is covered by the same copyright terms
- * except that the holder is Tim Hudson (tjh@cryptsoft.com).
- * 
- * Copyright remains Eric Young's, and as such any Copyright notices in
- * the code are not to be removed.
- * If this package is used in a product, Eric Young should be given attribution
- * as the author of the parts of the library used.
- * This can be in the form of a textual message at program startup or
- * in documentation (online or textual) provided with the package.
- * 
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions
- * are met:
- * 1. Redistributions of source code must retain the copyright
- *    notice, this list of conditions and the following disclaimer.
- * 2. Redistributions in binary form must reproduce the above copyright
- *    notice, this list of conditions and the following disclaimer in the
- *    documentation and/or other materials provided with the distribution.
- * 3. All advertising materials mentioning features or use of this software
- *    must display the following acknowledgement:
- *    "This product includes cryptographic software written by
- *     Eric Young (eay@cryptsoft.com)"
- *    The word 'cryptographic' can be left out if the rouines from the library
- *    being used are not cryptographic related :-).
- * 4. If you include any Windows specific code (or a derivative thereof) from 
- *    the apps directory (application code) you must include an acknowledgement:
- *    "This product includes software written by Tim Hudson (tjh@cryptsoft.com)"
- * 
- * THIS SOFTWARE IS PROVIDED BY ERIC YOUNG ``AS IS'' AND
- * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
- * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
- * ARE DISCLAIMED.  IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE
- * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
- * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
- * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
- * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
- * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
- * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
- * SUCH DAMAGE.
- * 
- * The licence and distribution terms for any publically available version or
- * derivative of this code cannot be changed.  i.e. this code cannot simply be
- * copied and put under another distribution licence
- * [including the GNU Public Licence.]
- */
-
-#include <stdio.h>
-#include "cryptlib.h"
-#include <openssl/lhash.h>
-#include <openssl/objects.h>
-#include <openssl/x509.h>
-#include <openssl/buffer.h>
-
-char *X509_NAME_oneline(X509_NAME *a, char *buf, int len)
-	{
-	X509_NAME_ENTRY *ne;
-int i;
-	int n,lold,l,l1,l2,num,j,type;
-	const char *s;
-	char *p;
-	unsigned char *q;
-	BUF_MEM *b=NULL;
-	static char hex[17]="0123456789ABCDEF";
-	int gs_doit[4];
-	char tmp_buf[80];
-#ifdef CHARSET_EBCDIC
-	char ebcdic_buf[1024];
-#endif
-
-	if (buf == NULL)
-		{
-		if ((b=BUF_MEM_new()) == NULL) goto err;
-		if (!BUF_MEM_grow(b,200)) goto err;
-		b->data[0]='\0';
-		len=200;
-		}
-	if (a == NULL)
-	    {
-	    if(b)
-		{
-		buf=b->data;
-		OPENSSL_free(b);
-		}
-	    strncpy(buf,"NO X509_NAME",len);
-	    buf[len-1]='\0';
-	    return buf;
-	    }
-
-	len--; /* space for '\0' */
-	l=0;
-	for (i=0; i<sk_X509_NAME_ENTRY_num(a->entries); i++)
-		{
-		ne=sk_X509_NAME_ENTRY_value(a->entries,i);
-		n=OBJ_obj2nid(ne->object);
-		if ((n == NID_undef) || ((s=OBJ_nid2sn(n)) == NULL))
-			{
-			i2t_ASN1_OBJECT(tmp_buf,sizeof(tmp_buf),ne->object);
-			s=tmp_buf;
-			}
-		l1=strlen(s);
-
-		type=ne->value->type;
-		num=ne->value->length;
-		q=ne->value->data;
-#ifdef CHARSET_EBCDIC
-                if (type == V_ASN1_GENERALSTRING ||
-		    type == V_ASN1_VISIBLESTRING ||
-		    type == V_ASN1_PRINTABLESTRING ||
-		    type == V_ASN1_TELETEXSTRING ||
-		    type == V_ASN1_VISIBLESTRING ||
-		    type == V_ASN1_IA5STRING) {
-                        ascii2ebcdic(ebcdic_buf, q,
-				     (num > sizeof ebcdic_buf)
-				     ? sizeof ebcdic_buf : num);
-                        q=ebcdic_buf;
-		}
-#endif
-
-		if ((type == V_ASN1_GENERALSTRING) && ((num%4) == 0))
-			{
-			gs_doit[0]=gs_doit[1]=gs_doit[2]=gs_doit[3]=0;
-			for (j=0; j<num; j++)
-				if (q[j] != 0) gs_doit[j&3]=1;
-
-			if (gs_doit[0]|gs_doit[1]|gs_doit[2])
-				gs_doit[0]=gs_doit[1]=gs_doit[2]=gs_doit[3]=1;
-			else
-				{
-				gs_doit[0]=gs_doit[1]=gs_doit[2]=0;
-				gs_doit[3]=1;
-				}
-			}
-		else
-			gs_doit[0]=gs_doit[1]=gs_doit[2]=gs_doit[3]=1;
-
-		for (l2=j=0; j<num; j++)
-			{
-			if (!gs_doit[j&3]) continue;
-			l2++;
-#ifndef CHARSET_EBCDIC
-			if ((q[j] < ' ') || (q[j] > '~')) l2+=3;
-#else
-			if ((os_toascii[q[j]] < os_toascii[' ']) ||
-			    (os_toascii[q[j]] > os_toascii['~'])) l2+=3;
-#endif
-			}
-
-		lold=l;
-		l+=1+l1+1+l2;
-		if (b != NULL)
-			{
-			if (!BUF_MEM_grow(b,l+1)) goto err;
-			p= &(b->data[lold]);
-			}
-		else if (l > len)
-			{
-			break;
-			}
-		else
-			p= &(buf[lold]);
-		*(p++)='/';
-		memcpy(p,s,(unsigned int)l1); p+=l1;
-		*(p++)='=';
-
-#ifndef CHARSET_EBCDIC /* q was assigned above already. */
-		q=ne->value->data;
-#endif
-
-		for (j=0; j<num; j++)
-			{
-			if (!gs_doit[j&3]) continue;
-#ifndef CHARSET_EBCDIC
-			n=q[j];
-			if ((n < ' ') || (n > '~'))
-				{
-				*(p++)='\\';
-				*(p++)='x';
-				*(p++)=hex[(n>>4)&0x0f];
-				*(p++)=hex[n&0x0f];
-				}
-			else
-				*(p++)=n;
-#else
-			n=os_toascii[q[j]];
-			if ((n < os_toascii[' ']) ||
-			    (n > os_toascii['~']))
-				{
-				*(p++)='\\';
-				*(p++)='x';
-				*(p++)=hex[(n>>4)&0x0f];
-				*(p++)=hex[n&0x0f];
-				}
-			else
-				*(p++)=q[j];
-#endif
-			}
-		*p='\0';
-		}
-	if (b != NULL)
-		{
-		p=b->data;
-		OPENSSL_free(b);
-		}
-	else
-		p=buf;
-	if (i == 0)
-		*p = '\0';
-	return(p);
-err:
-	X509err(X509_F_X509_NAME_ONELINE,ERR_R_MALLOC_FAILURE);
-	if (b != NULL) BUF_MEM_free(b);
-	return(NULL);
-	}
-
diff --git a/crypto/openssl/crypto/x509/x509_r2x.c b/crypto/openssl/crypto/x509/x509_r2x.c
deleted file mode 100644
index 254a14693d99..000000000000
--- a/crypto/openssl/crypto/x509/x509_r2x.c
+++ /dev/null
@@ -1,114 +0,0 @@
-/* crypto/x509/x509_r2x.c */
-/* Copyright (C) 1995-1998 Eric Young (eay@cryptsoft.com)
- * All rights reserved.
- *
- * This package is an SSL implementation written
- * by Eric Young (eay@cryptsoft.com).
- * The implementation was written so as to conform with Netscapes SSL.
- * 
- * This library is free for commercial and non-commercial use as long as
- * the following conditions are aheared to.  The following conditions
- * apply to all code found in this distribution, be it the RC4, RSA,
- * lhash, DES, etc., code; not just the SSL code.  The SSL documentation
- * included with this distribution is covered by the same copyright terms
- * except that the holder is Tim Hudson (tjh@cryptsoft.com).
- * 
- * Copyright remains Eric Young's, and as such any Copyright notices in
- * the code are not to be removed.
- * If this package is used in a product, Eric Young should be given attribution
- * as the author of the parts of the library used.
- * This can be in the form of a textual message at program startup or
- * in documentation (online or textual) provided with the package.
- * 
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions
- * are met:
- * 1. Redistributions of source code must retain the copyright
- *    notice, this list of conditions and the following disclaimer.
- * 2. Redistributions in binary form must reproduce the above copyright
- *    notice, this list of conditions and the following disclaimer in the
- *    documentation and/or other materials provided with the distribution.
- * 3. All advertising materials mentioning features or use of this software
- *    must display the following acknowledgement:
- *    "This product includes cryptographic software written by
- *     Eric Young (eay@cryptsoft.com)"
- *    The word 'cryptographic' can be left out if the rouines from the library
- *    being used are not cryptographic related :-).
- * 4. If you include any Windows specific code (or a derivative thereof) from 
- *    the apps directory (application code) you must include an acknowledgement:
- *    "This product includes software written by Tim Hudson (tjh@cryptsoft.com)"
- * 
- * THIS SOFTWARE IS PROVIDED BY ERIC YOUNG ``AS IS'' AND
- * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
- * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
- * ARE DISCLAIMED.  IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE
- * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
- * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
- * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
- * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
- * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
- * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
- * SUCH DAMAGE.
- * 
- * The licence and distribution terms for any publically available version or
- * derivative of this code cannot be changed.  i.e. this code cannot simply be
- * copied and put under another distribution licence
- * [including the GNU Public Licence.]
- */
-
-#include <stdio.h>
-#include "cryptlib.h"
-#include <openssl/bn.h>
-#include <openssl/evp.h>
-#include <openssl/asn1.h>
-#include <openssl/x509.h>
-#include <openssl/objects.h>
-#include <openssl/buffer.h>
-
-X509 *X509_REQ_to_X509(X509_REQ *r, int days, EVP_PKEY *pkey)
-	{
-	X509 *ret=NULL;
-	X509_CINF *xi=NULL;
-	X509_NAME *xn;
-
-	if ((ret=X509_new()) == NULL)
-		{
-		X509err(X509_F_X509_REQ_TO_X509,ERR_R_MALLOC_FAILURE);
-		goto err;
-		}
-
-	/* duplicate the request */
-	xi=ret->cert_info;
-
-	if (sk_X509_ATTRIBUTE_num(r->req_info->attributes) != 0)
-		{
-		if ((xi->version=M_ASN1_INTEGER_new()) == NULL) goto err;
-		if (!ASN1_INTEGER_set(xi->version,2)) goto err;
-/*		xi->extensions=ri->attributes; <- bad, should not ever be done
-		ri->attributes=NULL; */
-		}
-
-	xn=X509_REQ_get_subject_name(r);
-	if (X509_set_subject_name(ret,X509_NAME_dup(xn)) == 0)
-		goto err;
-	if (X509_set_issuer_name(ret,X509_NAME_dup(xn)) == 0)
-		goto err;
-
-	if (X509_gmtime_adj(xi->validity->notBefore,0) == NULL)
-		goto err;
-	if (X509_gmtime_adj(xi->validity->notAfter,(long)60*60*24*days) == NULL)
-		goto err;
-
-	X509_set_pubkey(ret,X509_REQ_get_pubkey(r));
-
-	if (!X509_sign(ret,pkey,EVP_md5()))
-		goto err;
-	if (0)
-		{
-err:
-		X509_free(ret);
-		ret=NULL;
-		}
-	return(ret);
-	}
-
diff --git a/crypto/openssl/crypto/x509/x509_req.c b/crypto/openssl/crypto/x509/x509_req.c
deleted file mode 100644
index 3872e1fb64a5..000000000000
--- a/crypto/openssl/crypto/x509/x509_req.c
+++ /dev/null
@@ -1,324 +0,0 @@
-/* crypto/x509/x509_req.c */
-/* Copyright (C) 1995-1998 Eric Young (eay@cryptsoft.com)
- * All rights reserved.
- *
- * This package is an SSL implementation written
- * by Eric Young (eay@cryptsoft.com).
- * The implementation was written so as to conform with Netscapes SSL.
- * 
- * This library is free for commercial and non-commercial use as long as
- * the following conditions are aheared to.  The following conditions
- * apply to all code found in this distribution, be it the RC4, RSA,
- * lhash, DES, etc., code; not just the SSL code.  The SSL documentation
- * included with this distribution is covered by the same copyright terms
- * except that the holder is Tim Hudson (tjh@cryptsoft.com).
- * 
- * Copyright remains Eric Young's, and as such any Copyright notices in
- * the code are not to be removed.
- * If this package is used in a product, Eric Young should be given attribution
- * as the author of the parts of the library used.
- * This can be in the form of a textual message at program startup or
- * in documentation (online or textual) provided with the package.
- * 
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions
- * are met:
- * 1. Redistributions of source code must retain the copyright
- *    notice, this list of conditions and the following disclaimer.
- * 2. Redistributions in binary form must reproduce the above copyright
- *    notice, this list of conditions and the following disclaimer in the
- *    documentation and/or other materials provided with the distribution.
- * 3. All advertising materials mentioning features or use of this software
- *    must display the following acknowledgement:
- *    "This product includes cryptographic software written by
- *     Eric Young (eay@cryptsoft.com)"
- *    The word 'cryptographic' can be left out if the rouines from the library
- *    being used are not cryptographic related :-).
- * 4. If you include any Windows specific code (or a derivative thereof) from 
- *    the apps directory (application code) you must include an acknowledgement:
- *    "This product includes software written by Tim Hudson (tjh@cryptsoft.com)"
- * 
- * THIS SOFTWARE IS PROVIDED BY ERIC YOUNG ``AS IS'' AND
- * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
- * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
- * ARE DISCLAIMED.  IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE
- * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
- * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
- * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
- * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
- * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
- * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
- * SUCH DAMAGE.
- * 
- * The licence and distribution terms for any publically available version or
- * derivative of this code cannot be changed.  i.e. this code cannot simply be
- * copied and put under another distribution licence
- * [including the GNU Public Licence.]
- */
-
-#include <stdio.h>
-#include "cryptlib.h"
-#include <openssl/bn.h>
-#include <openssl/evp.h>
-#include <openssl/asn1.h>
-#include <openssl/x509.h>
-#include <openssl/objects.h>
-#include <openssl/buffer.h>
-#include <openssl/pem.h>
-
-X509_REQ *X509_to_X509_REQ(X509 *x, EVP_PKEY *pkey, const EVP_MD *md)
-	{
-	X509_REQ *ret;
-	X509_REQ_INFO *ri;
-	int i;
-	EVP_PKEY *pktmp;
-
-	ret=X509_REQ_new();
-	if (ret == NULL)
-		{
-		X509err(X509_F_X509_TO_X509_REQ,ERR_R_MALLOC_FAILURE);
-		goto err;
-		}
-
-	ri=ret->req_info;
-
-	ri->version->length=1;
-	ri->version->data=(unsigned char *)OPENSSL_malloc(1);
-	if (ri->version->data == NULL) goto err;
-	ri->version->data[0]=0; /* version == 0 */
-
-	if (!X509_REQ_set_subject_name(ret,X509_get_subject_name(x)))
-		goto err;
-
-	pktmp = X509_get_pubkey(x);
-	i=X509_REQ_set_pubkey(ret,pktmp);
-	EVP_PKEY_free(pktmp);
-	if (!i) goto err;
-
-	if (pkey != NULL)
-		{
-		if (!X509_REQ_sign(ret,pkey,md))
-			goto err;
-		}
-	return(ret);
-err:
-	X509_REQ_free(ret);
-	return(NULL);
-	}
-
-EVP_PKEY *X509_REQ_get_pubkey(X509_REQ *req)
-	{
-	if ((req == NULL) || (req->req_info == NULL))
-		return(NULL);
-	return(X509_PUBKEY_get(req->req_info->pubkey));
-	}
-
-int X509_REQ_check_private_key(X509_REQ *x, EVP_PKEY *k)
-	{
-	EVP_PKEY *xk=NULL;
-	int ok=0;
-
-	xk=X509_REQ_get_pubkey(x);
-	switch (EVP_PKEY_cmp(xk, k))
-		{
-	case 1:
-		ok=1;
-		break;
-	case 0:
-		X509err(X509_F_X509_REQ_CHECK_PRIVATE_KEY,X509_R_KEY_VALUES_MISMATCH);
-		break;
-	case -1:
-		X509err(X509_F_X509_REQ_CHECK_PRIVATE_KEY,X509_R_KEY_TYPE_MISMATCH);
-		break;
-	case -2:
-#ifndef OPENSSL_NO_EC
-		if (k->type == EVP_PKEY_EC)
-			{
-			X509err(X509_F_X509_REQ_CHECK_PRIVATE_KEY, ERR_R_EC_LIB);
-			break;
-			}
-#endif
-#ifndef OPENSSL_NO_DH
-		if (k->type == EVP_PKEY_DH)
-			{
-			/* No idea */
-			X509err(X509_F_X509_REQ_CHECK_PRIVATE_KEY,X509_R_CANT_CHECK_DH_KEY);
-			break;
-			}
-#endif
-	        X509err(X509_F_X509_REQ_CHECK_PRIVATE_KEY,X509_R_UNKNOWN_KEY_TYPE);
-		}
-
-	EVP_PKEY_free(xk);
-	return(ok);
-	}
-
-/* It seems several organisations had the same idea of including a list of
- * extensions in a certificate request. There are at least two OIDs that are
- * used and there may be more: so the list is configurable.
- */
-
-static int ext_nid_list[] = { NID_ext_req, NID_ms_ext_req, NID_undef};
-
-static int *ext_nids = ext_nid_list;
-
-int X509_REQ_extension_nid(int req_nid)
-{
-	int i, nid;
-	for(i = 0; ; i++) {
-		nid = ext_nids[i];
-		if(nid == NID_undef) return 0;
-		else if (req_nid == nid) return 1;
-	}
-}
-
-int *X509_REQ_get_extension_nids(void)
-{
-	return ext_nids;
-}
-	
-void X509_REQ_set_extension_nids(int *nids)
-{
-	ext_nids = nids;
-}
-
-STACK_OF(X509_EXTENSION) *X509_REQ_get_extensions(X509_REQ *req)
-	{
-	X509_ATTRIBUTE *attr;
-	ASN1_TYPE *ext = NULL;
-	int idx, *pnid;
-	const unsigned char *p;
-
-	if ((req == NULL) || (req->req_info == NULL) || !ext_nids)
-		return(NULL);
-	for (pnid = ext_nids; *pnid != NID_undef; pnid++)
-		{
-		idx = X509_REQ_get_attr_by_NID(req, *pnid, -1);
-		if (idx == -1)
-			continue;
-		attr = X509_REQ_get_attr(req, idx);
-		if(attr->single) ext = attr->value.single;
-		else if(sk_ASN1_TYPE_num(attr->value.set))
-			ext = sk_ASN1_TYPE_value(attr->value.set, 0);
-		break;
-		}
-	if(!ext || (ext->type != V_ASN1_SEQUENCE))
-		return NULL;
-	p = ext->value.sequence->data;
-	return d2i_ASN1_SET_OF_X509_EXTENSION(NULL, &p,
-			ext->value.sequence->length,
-			d2i_X509_EXTENSION, X509_EXTENSION_free,
-			V_ASN1_SEQUENCE, V_ASN1_UNIVERSAL);
-}
-
-/* Add a STACK_OF extensions to a certificate request: allow alternative OIDs
- * in case we want to create a non standard one.
- */
-
-int X509_REQ_add_extensions_nid(X509_REQ *req, STACK_OF(X509_EXTENSION) *exts,
-				int nid)
-{
-	unsigned char *p = NULL, *q;
-	long len;
-	ASN1_TYPE *at = NULL;
-	X509_ATTRIBUTE *attr = NULL;
-	if(!(at = ASN1_TYPE_new()) ||
-		!(at->value.sequence = ASN1_STRING_new())) goto err;
-
-	at->type = V_ASN1_SEQUENCE;
-	/* Generate encoding of extensions */
-	len = i2d_ASN1_SET_OF_X509_EXTENSION(exts, NULL, i2d_X509_EXTENSION,
-			V_ASN1_SEQUENCE, V_ASN1_UNIVERSAL, IS_SEQUENCE);
-	if(!(p = OPENSSL_malloc(len))) goto err;
-	q = p;
-	i2d_ASN1_SET_OF_X509_EXTENSION(exts, &q, i2d_X509_EXTENSION,
-			V_ASN1_SEQUENCE, V_ASN1_UNIVERSAL, IS_SEQUENCE);
-	at->value.sequence->data = p;
-	p = NULL;
-	at->value.sequence->length = len;
-	if(!(attr = X509_ATTRIBUTE_new())) goto err;
-	if(!(attr->value.set = sk_ASN1_TYPE_new_null())) goto err;
-	if(!sk_ASN1_TYPE_push(attr->value.set, at)) goto err;
-	at = NULL;
-	attr->single = 0;
-	attr->object = OBJ_nid2obj(nid);
-	if (!req->req_info->attributes)
-		{
-		if (!(req->req_info->attributes = sk_X509_ATTRIBUTE_new_null()))
-			goto err;
-		}
-	if(!sk_X509_ATTRIBUTE_push(req->req_info->attributes, attr)) goto err;
-	return 1;
-	err:
-	if(p) OPENSSL_free(p);
-	X509_ATTRIBUTE_free(attr);
-	ASN1_TYPE_free(at);
-	return 0;
-}
-/* This is the normal usage: use the "official" OID */
-int X509_REQ_add_extensions(X509_REQ *req, STACK_OF(X509_EXTENSION) *exts)
-{
-	return X509_REQ_add_extensions_nid(req, exts, NID_ext_req);
-}
-
-/* Request attribute functions */
-
-int X509_REQ_get_attr_count(const X509_REQ *req)
-{
-	return X509at_get_attr_count(req->req_info->attributes);
-}
-
-int X509_REQ_get_attr_by_NID(const X509_REQ *req, int nid,
-			  int lastpos)
-{
-	return X509at_get_attr_by_NID(req->req_info->attributes, nid, lastpos);
-}
-
-int X509_REQ_get_attr_by_OBJ(const X509_REQ *req, ASN1_OBJECT *obj,
-			  int lastpos)
-{
-	return X509at_get_attr_by_OBJ(req->req_info->attributes, obj, lastpos);
-}
-
-X509_ATTRIBUTE *X509_REQ_get_attr(const X509_REQ *req, int loc)
-{
-	return X509at_get_attr(req->req_info->attributes, loc);
-}
-
-X509_ATTRIBUTE *X509_REQ_delete_attr(X509_REQ *req, int loc)
-{
-	return X509at_delete_attr(req->req_info->attributes, loc);
-}
-
-int X509_REQ_add1_attr(X509_REQ *req, X509_ATTRIBUTE *attr)
-{
-	if(X509at_add1_attr(&req->req_info->attributes, attr)) return 1;
-	return 0;
-}
-
-int X509_REQ_add1_attr_by_OBJ(X509_REQ *req,
-			const ASN1_OBJECT *obj, int type,
-			const unsigned char *bytes, int len)
-{
-	if(X509at_add1_attr_by_OBJ(&req->req_info->attributes, obj,
-				type, bytes, len)) return 1;
-	return 0;
-}
-
-int X509_REQ_add1_attr_by_NID(X509_REQ *req,
-			int nid, int type,
-			const unsigned char *bytes, int len)
-{
-	if(X509at_add1_attr_by_NID(&req->req_info->attributes, nid,
-				type, bytes, len)) return 1;
-	return 0;
-}
-
-int X509_REQ_add1_attr_by_txt(X509_REQ *req,
-			const char *attrname, int type,
-			const unsigned char *bytes, int len)
-{
-	if(X509at_add1_attr_by_txt(&req->req_info->attributes, attrname,
-				type, bytes, len)) return 1;
-	return 0;
-}
diff --git a/crypto/openssl/crypto/x509/x509_set.c b/crypto/openssl/crypto/x509/x509_set.c
deleted file mode 100644
index aaf61ca062b9..000000000000
--- a/crypto/openssl/crypto/x509/x509_set.c
+++ /dev/null
@@ -1,150 +0,0 @@
-/* crypto/x509/x509_set.c */
-/* Copyright (C) 1995-1998 Eric Young (eay@cryptsoft.com)
- * All rights reserved.
- *
- * This package is an SSL implementation written
- * by Eric Young (eay@cryptsoft.com).
- * The implementation was written so as to conform with Netscapes SSL.
- * 
- * This library is free for commercial and non-commercial use as long as
- * the following conditions are aheared to.  The following conditions
- * apply to all code found in this distribution, be it the RC4, RSA,
- * lhash, DES, etc., code; not just the SSL code.  The SSL documentation
- * included with this distribution is covered by the same copyright terms
- * except that the holder is Tim Hudson (tjh@cryptsoft.com).
- * 
- * Copyright remains Eric Young's, and as such any Copyright notices in
- * the code are not to be removed.
- * If this package is used in a product, Eric Young should be given attribution
- * as the author of the parts of the library used.
- * This can be in the form of a textual message at program startup or
- * in documentation (online or textual) provided with the package.
- * 
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions
- * are met:
- * 1. Redistributions of source code must retain the copyright
- *    notice, this list of conditions and the following disclaimer.
- * 2. Redistributions in binary form must reproduce the above copyright
- *    notice, this list of conditions and the following disclaimer in the
- *    documentation and/or other materials provided with the distribution.
- * 3. All advertising materials mentioning features or use of this software
- *    must display the following acknowledgement:
- *    "This product includes cryptographic software written by
- *     Eric Young (eay@cryptsoft.com)"
- *    The word 'cryptographic' can be left out if the rouines from the library
- *    being used are not cryptographic related :-).
- * 4. If you include any Windows specific code (or a derivative thereof) from 
- *    the apps directory (application code) you must include an acknowledgement:
- *    "This product includes software written by Tim Hudson (tjh@cryptsoft.com)"
- * 
- * THIS SOFTWARE IS PROVIDED BY ERIC YOUNG ``AS IS'' AND
- * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
- * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
- * ARE DISCLAIMED.  IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE
- * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
- * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
- * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
- * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
- * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
- * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
- * SUCH DAMAGE.
- * 
- * The licence and distribution terms for any publically available version or
- * derivative of this code cannot be changed.  i.e. this code cannot simply be
- * copied and put under another distribution licence
- * [including the GNU Public Licence.]
- */
-
-#include <stdio.h>
-#include "cryptlib.h"
-#include <openssl/asn1.h>
-#include <openssl/objects.h>
-#include <openssl/evp.h>
-#include <openssl/x509.h>
-
-int X509_set_version(X509 *x, long version)
-	{
-	if (x == NULL) return(0);
-	if (x->cert_info->version == NULL)
-		{
-		if ((x->cert_info->version=M_ASN1_INTEGER_new()) == NULL)
-			return(0);
-		}
-	return(ASN1_INTEGER_set(x->cert_info->version,version));
-	}
-
-int X509_set_serialNumber(X509 *x, ASN1_INTEGER *serial)
-	{
-	ASN1_INTEGER *in;
-
-	if (x == NULL) return(0);
-	in=x->cert_info->serialNumber;
-	if (in != serial)
-		{
-		in=M_ASN1_INTEGER_dup(serial);
-		if (in != NULL)
-			{
-			M_ASN1_INTEGER_free(x->cert_info->serialNumber);
-			x->cert_info->serialNumber=in;
-			}
-		}
-	return(in != NULL);
-	}
-
-int X509_set_issuer_name(X509 *x, X509_NAME *name)
-	{
-	if ((x == NULL) || (x->cert_info == NULL)) return(0);
-	return(X509_NAME_set(&x->cert_info->issuer,name));
-	}
-
-int X509_set_subject_name(X509 *x, X509_NAME *name)
-	{
-	if ((x == NULL) || (x->cert_info == NULL)) return(0);
-	return(X509_NAME_set(&x->cert_info->subject,name));
-	}
-
-int X509_set_notBefore(X509 *x, ASN1_TIME *tm)
-	{
-	ASN1_TIME *in;
-
-	if ((x == NULL) || (x->cert_info->validity == NULL)) return(0);
-	in=x->cert_info->validity->notBefore;
-	if (in != tm)
-		{
-		in=M_ASN1_TIME_dup(tm);
-		if (in != NULL)
-			{
-			M_ASN1_TIME_free(x->cert_info->validity->notBefore);
-			x->cert_info->validity->notBefore=in;
-			}
-		}
-	return(in != NULL);
-	}
-
-int X509_set_notAfter(X509 *x, ASN1_TIME *tm)
-	{
-	ASN1_TIME *in;
-
-	if ((x == NULL) || (x->cert_info->validity == NULL)) return(0);
-	in=x->cert_info->validity->notAfter;
-	if (in != tm)
-		{
-		in=M_ASN1_TIME_dup(tm);
-		if (in != NULL)
-			{
-			M_ASN1_TIME_free(x->cert_info->validity->notAfter);
-			x->cert_info->validity->notAfter=in;
-			}
-		}
-	return(in != NULL);
-	}
-
-int X509_set_pubkey(X509 *x, EVP_PKEY *pkey)
-	{
-	if ((x == NULL) || (x->cert_info == NULL)) return(0);
-	return(X509_PUBKEY_set(&(x->cert_info->key),pkey));
-	}
-
-
-
diff --git a/crypto/openssl/crypto/x509/x509_trs.c b/crypto/openssl/crypto/x509/x509_trs.c
deleted file mode 100644
index 9c84a59d523c..000000000000
--- a/crypto/openssl/crypto/x509/x509_trs.c
+++ /dev/null
@@ -1,287 +0,0 @@
-/* x509_trs.c */
-/* Written by Dr Stephen N Henson (shenson@bigfoot.com) for the OpenSSL
- * project 1999.
- */
-/* ====================================================================
- * Copyright (c) 1999 The OpenSSL Project.  All rights reserved.
- *
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions
- * are met:
- *
- * 1. Redistributions of source code must retain the above copyright
- *    notice, this list of conditions and the following disclaimer. 
- *
- * 2. Redistributions in binary form must reproduce the above copyright
- *    notice, this list of conditions and the following disclaimer in
- *    the documentation and/or other materials provided with the
- *    distribution.
- *
- * 3. All advertising materials mentioning features or use of this
- *    software must display the following acknowledgment:
- *    "This product includes software developed by the OpenSSL Project
- *    for use in the OpenSSL Toolkit. (http://www.OpenSSL.org/)"
- *
- * 4. The names "OpenSSL Toolkit" and "OpenSSL Project" must not be used to
- *    endorse or promote products derived from this software without
- *    prior written permission. For written permission, please contact
- *    licensing@OpenSSL.org.
- *
- * 5. Products derived from this software may not be called "OpenSSL"
- *    nor may "OpenSSL" appear in their names without prior written
- *    permission of the OpenSSL Project.
- *
- * 6. Redistributions of any form whatsoever must retain the following
- *    acknowledgment:
- *    "This product includes software developed by the OpenSSL Project
- *    for use in the OpenSSL Toolkit (http://www.OpenSSL.org/)"
- *
- * THIS SOFTWARE IS PROVIDED BY THE OpenSSL PROJECT ``AS IS'' AND ANY
- * EXPRESSED OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
- * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR
- * PURPOSE ARE DISCLAIMED.  IN NO EVENT SHALL THE OpenSSL PROJECT OR
- * ITS CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
- * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
- * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
- * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
- * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
- * STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
- * ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED
- * OF THE POSSIBILITY OF SUCH DAMAGE.
- * ====================================================================
- *
- * This product includes cryptographic software written by Eric Young
- * (eay@cryptsoft.com).  This product includes software written by Tim
- * Hudson (tjh@cryptsoft.com).
- *
- */
-
-#include <stdio.h>
-#include "cryptlib.h"
-#include <openssl/x509v3.h>
-
-
-static int tr_cmp(const X509_TRUST * const *a,
-		const X509_TRUST * const *b);
-static void trtable_free(X509_TRUST *p);
-
-static int trust_1oidany(X509_TRUST *trust, X509 *x, int flags);
-static int trust_1oid(X509_TRUST *trust, X509 *x, int flags);
-static int trust_compat(X509_TRUST *trust, X509 *x, int flags);
-
-static int obj_trust(int id, X509 *x, int flags);
-static int (*default_trust)(int id, X509 *x, int flags) = obj_trust;
-
-/* WARNING: the following table should be kept in order of trust
- * and without any gaps so we can just subtract the minimum trust
- * value to get an index into the table
- */
-
-static X509_TRUST trstandard[] = {
-{X509_TRUST_COMPAT, 0, trust_compat, "compatible", 0, NULL},
-{X509_TRUST_SSL_CLIENT, 0, trust_1oidany, "SSL Client", NID_client_auth, NULL},
-{X509_TRUST_SSL_SERVER, 0, trust_1oidany, "SSL Server", NID_server_auth, NULL},
-{X509_TRUST_EMAIL, 0, trust_1oidany, "S/MIME email", NID_email_protect, NULL},
-{X509_TRUST_OBJECT_SIGN, 0, trust_1oidany, "Object Signer", NID_code_sign, NULL},
-{X509_TRUST_OCSP_SIGN, 0, trust_1oid, "OCSP responder", NID_OCSP_sign, NULL},
-{X509_TRUST_OCSP_REQUEST, 0, trust_1oid, "OCSP request", NID_ad_OCSP, NULL}
-};
-
-#define X509_TRUST_COUNT	(sizeof(trstandard)/sizeof(X509_TRUST))
-
-IMPLEMENT_STACK_OF(X509_TRUST)
-
-static STACK_OF(X509_TRUST) *trtable = NULL;
-
-static int tr_cmp(const X509_TRUST * const *a,
-		const X509_TRUST * const *b)
-{
-	return (*a)->trust - (*b)->trust;
-}
-
-int (*X509_TRUST_set_default(int (*trust)(int , X509 *, int)))(int, X509 *, int)
-{
-	int (*oldtrust)(int , X509 *, int);
-	oldtrust = default_trust;
-	default_trust = trust;
-	return oldtrust;
-}
-
-
-int X509_check_trust(X509 *x, int id, int flags)
-{
-	X509_TRUST *pt;
-	int idx;
-	if(id == -1) return 1;
-	idx = X509_TRUST_get_by_id(id);
-	if(idx == -1) return default_trust(id, x, flags);
-	pt = X509_TRUST_get0(idx);
-	return pt->check_trust(pt, x, flags);
-}
-
-int X509_TRUST_get_count(void)
-{
-	if(!trtable) return X509_TRUST_COUNT;
-	return sk_X509_TRUST_num(trtable) + X509_TRUST_COUNT;
-}
-
-X509_TRUST * X509_TRUST_get0(int idx)
-{
-	if(idx < 0) return NULL;
-	if(idx < (int)X509_TRUST_COUNT) return trstandard + idx;
-	return sk_X509_TRUST_value(trtable, idx - X509_TRUST_COUNT);
-}
-
-int X509_TRUST_get_by_id(int id)
-{
-	X509_TRUST tmp;
-	int idx;
-	if((id >= X509_TRUST_MIN) && (id <= X509_TRUST_MAX))
-				 return id - X509_TRUST_MIN;
-	tmp.trust = id;
-	if(!trtable) return -1;
-	idx = sk_X509_TRUST_find(trtable, &tmp);
-	if(idx == -1) return -1;
-	return idx + X509_TRUST_COUNT;
-}
-
-int X509_TRUST_set(int *t, int trust)
-{
-	if(X509_TRUST_get_by_id(trust) == -1) {
-		X509err(X509_F_X509_TRUST_SET, X509_R_INVALID_TRUST);
-		return 0;
-	}
-	*t = trust;
-	return 1;
-}
-
-int X509_TRUST_add(int id, int flags, int (*ck)(X509_TRUST *, X509 *, int),
-					char *name, int arg1, void *arg2)
-{
-	int idx;
-	X509_TRUST *trtmp;
-	/* This is set according to what we change: application can't set it */
-	flags &= ~X509_TRUST_DYNAMIC;
-	/* This will always be set for application modified trust entries */
-	flags |= X509_TRUST_DYNAMIC_NAME;
-	/* Get existing entry if any */
-	idx = X509_TRUST_get_by_id(id);
-	/* Need a new entry */
-	if(idx == -1) {
-		if(!(trtmp = OPENSSL_malloc(sizeof(X509_TRUST)))) {
-			X509err(X509_F_X509_TRUST_ADD,ERR_R_MALLOC_FAILURE);
-			return 0;
-		}
-		trtmp->flags = X509_TRUST_DYNAMIC;
-	} else trtmp = X509_TRUST_get0(idx);
-
-	/* OPENSSL_free existing name if dynamic */
-	if(trtmp->flags & X509_TRUST_DYNAMIC_NAME) OPENSSL_free(trtmp->name);
-	/* dup supplied name */
-	if(!(trtmp->name = BUF_strdup(name))) {
-		X509err(X509_F_X509_TRUST_ADD,ERR_R_MALLOC_FAILURE);
-		return 0;
-	}
-	/* Keep the dynamic flag of existing entry */
-	trtmp->flags &= X509_TRUST_DYNAMIC;
-	/* Set all other flags */
-	trtmp->flags |= flags;
-
-	trtmp->trust = id;
-	trtmp->check_trust = ck;
-	trtmp->arg1 = arg1;
-	trtmp->arg2 = arg2;
-
-	/* If its a new entry manage the dynamic table */
-	if(idx == -1) {
-		if(!trtable && !(trtable = sk_X509_TRUST_new(tr_cmp))) {
-			X509err(X509_F_X509_TRUST_ADD,ERR_R_MALLOC_FAILURE);
-			return 0;
-		}
-		if (!sk_X509_TRUST_push(trtable, trtmp)) {
-			X509err(X509_F_X509_TRUST_ADD,ERR_R_MALLOC_FAILURE);
-			return 0;
-		}
-	}
-	return 1;
-}
-
-static void trtable_free(X509_TRUST *p)
-	{
-	if(!p) return;
-	if (p->flags & X509_TRUST_DYNAMIC) 
-		{
-		if (p->flags & X509_TRUST_DYNAMIC_NAME)
-			OPENSSL_free(p->name);
-		OPENSSL_free(p);
-		}
-	}
-
-void X509_TRUST_cleanup(void)
-{
-	unsigned int i;
-	for(i = 0; i < X509_TRUST_COUNT; i++) trtable_free(trstandard + i);
-	sk_X509_TRUST_pop_free(trtable, trtable_free);
-	trtable = NULL;
-}
-
-int X509_TRUST_get_flags(X509_TRUST *xp)
-{
-	return xp->flags;
-}
-
-char *X509_TRUST_get0_name(X509_TRUST *xp)
-{
-	return xp->name;
-}
-
-int X509_TRUST_get_trust(X509_TRUST *xp)
-{
-	return xp->trust;
-}
-
-static int trust_1oidany(X509_TRUST *trust, X509 *x, int flags)
-{
-	if(x->aux && (x->aux->trust || x->aux->reject))
-		return obj_trust(trust->arg1, x, flags);
-	/* we don't have any trust settings: for compatibility
-	 * we return trusted if it is self signed
-	 */
-	return trust_compat(trust, x, flags);
-}
-
-static int trust_1oid(X509_TRUST *trust, X509 *x, int flags)
-{
-	if(x->aux) return obj_trust(trust->arg1, x, flags);
-	return X509_TRUST_UNTRUSTED;
-}
-
-static int trust_compat(X509_TRUST *trust, X509 *x, int flags)
-{
-	X509_check_purpose(x, -1, 0);
-	if(x->ex_flags & EXFLAG_SS) return X509_TRUST_TRUSTED;
-	else return X509_TRUST_UNTRUSTED;
-}
-
-static int obj_trust(int id, X509 *x, int flags)
-{
-	ASN1_OBJECT *obj;
-	int i;
-	X509_CERT_AUX *ax;
-	ax = x->aux;
-	if(!ax) return X509_TRUST_UNTRUSTED;
-	if(ax->reject) {
-		for(i = 0; i < sk_ASN1_OBJECT_num(ax->reject); i++) {
-			obj = sk_ASN1_OBJECT_value(ax->reject, i);
-			if(OBJ_obj2nid(obj) == id) return X509_TRUST_REJECTED;
-		}
-	}	
-	if(ax->trust) {
-		for(i = 0; i < sk_ASN1_OBJECT_num(ax->trust); i++) {
-			obj = sk_ASN1_OBJECT_value(ax->trust, i);
-			if(OBJ_obj2nid(obj) == id) return X509_TRUST_TRUSTED;
-		}
-	}
-	return X509_TRUST_UNTRUSTED;
-}
-
diff --git a/crypto/openssl/crypto/x509/x509_txt.c b/crypto/openssl/crypto/x509/x509_txt.c
deleted file mode 100644
index a80c87eef3a9..000000000000
--- a/crypto/openssl/crypto/x509/x509_txt.c
+++ /dev/null
@@ -1,173 +0,0 @@
-/* crypto/x509/x509_txt.c */
-/* Copyright (C) 1995-1998 Eric Young (eay@cryptsoft.com)
- * All rights reserved.
- *
- * This package is an SSL implementation written
- * by Eric Young (eay@cryptsoft.com).
- * The implementation was written so as to conform with Netscapes SSL.
- * 
- * This library is free for commercial and non-commercial use as long as
- * the following conditions are aheared to.  The following conditions
- * apply to all code found in this distribution, be it the RC4, RSA,
- * lhash, DES, etc., code; not just the SSL code.  The SSL documentation
- * included with this distribution is covered by the same copyright terms
- * except that the holder is Tim Hudson (tjh@cryptsoft.com).
- * 
- * Copyright remains Eric Young's, and as such any Copyright notices in
- * the code are not to be removed.
- * If this package is used in a product, Eric Young should be given attribution
- * as the author of the parts of the library used.
- * This can be in the form of a textual message at program startup or
- * in documentation (online or textual) provided with the package.
- * 
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions
- * are met:
- * 1. Redistributions of source code must retain the copyright
- *    notice, this list of conditions and the following disclaimer.
- * 2. Redistributions in binary form must reproduce the above copyright
- *    notice, this list of conditions and the following disclaimer in the
- *    documentation and/or other materials provided with the distribution.
- * 3. All advertising materials mentioning features or use of this software
- *    must display the following acknowledgement:
- *    "This product includes cryptographic software written by
- *     Eric Young (eay@cryptsoft.com)"
- *    The word 'cryptographic' can be left out if the rouines from the library
- *    being used are not cryptographic related :-).
- * 4. If you include any Windows specific code (or a derivative thereof) from 
- *    the apps directory (application code) you must include an acknowledgement:
- *    "This product includes software written by Tim Hudson (tjh@cryptsoft.com)"
- * 
- * THIS SOFTWARE IS PROVIDED BY ERIC YOUNG ``AS IS'' AND
- * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
- * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
- * ARE DISCLAIMED.  IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE
- * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
- * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
- * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
- * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
- * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
- * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
- * SUCH DAMAGE.
- * 
- * The licence and distribution terms for any publically available version or
- * derivative of this code cannot be changed.  i.e. this code cannot simply be
- * copied and put under another distribution licence
- * [including the GNU Public Licence.]
- */
-
-#include <stdio.h>
-#include <time.h>
-#include <errno.h>
-
-#include "cryptlib.h"
-#include <openssl/lhash.h>
-#include <openssl/buffer.h>
-#include <openssl/evp.h>
-#include <openssl/asn1.h>
-#include <openssl/x509.h>
-#include <openssl/objects.h>
-
-const char *X509_verify_cert_error_string(long n)
-	{
-	static char buf[100];
-
-	switch ((int)n)
-		{
-	case X509_V_OK:
-		return("ok");
-	case X509_V_ERR_UNABLE_TO_GET_ISSUER_CERT:
-		return("unable to get issuer certificate");
-	case X509_V_ERR_UNABLE_TO_GET_CRL:
-		return("unable to get certificate CRL");
-	case X509_V_ERR_UNABLE_TO_DECRYPT_CERT_SIGNATURE:
-		return("unable to decrypt certificate's signature");
-	case X509_V_ERR_UNABLE_TO_DECRYPT_CRL_SIGNATURE:
-		return("unable to decrypt CRL's signature");
-	case X509_V_ERR_UNABLE_TO_DECODE_ISSUER_PUBLIC_KEY:
-		return("unable to decode issuer public key");
-	case X509_V_ERR_CERT_SIGNATURE_FAILURE:
-		return("certificate signature failure");
-	case X509_V_ERR_CRL_SIGNATURE_FAILURE:
-		return("CRL signature failure");
-	case X509_V_ERR_CERT_NOT_YET_VALID:
-		return("certificate is not yet valid");
-	case X509_V_ERR_CRL_NOT_YET_VALID:
-		return("CRL is not yet valid");
-	case X509_V_ERR_CERT_HAS_EXPIRED:
-		return("certificate has expired");
-	case X509_V_ERR_CRL_HAS_EXPIRED:
-		return("CRL has expired");
-	case X509_V_ERR_ERROR_IN_CERT_NOT_BEFORE_FIELD:
-		return("format error in certificate's notBefore field");
-	case X509_V_ERR_ERROR_IN_CERT_NOT_AFTER_FIELD:
-		return("format error in certificate's notAfter field");
-	case X509_V_ERR_ERROR_IN_CRL_LAST_UPDATE_FIELD:
-		return("format error in CRL's lastUpdate field");
-	case X509_V_ERR_ERROR_IN_CRL_NEXT_UPDATE_FIELD:
-		return("format error in CRL's nextUpdate field");
-	case X509_V_ERR_OUT_OF_MEM:
-		return("out of memory");
-	case X509_V_ERR_DEPTH_ZERO_SELF_SIGNED_CERT:
-		return("self signed certificate");
-	case X509_V_ERR_SELF_SIGNED_CERT_IN_CHAIN:
-		return("self signed certificate in certificate chain");
-	case X509_V_ERR_UNABLE_TO_GET_ISSUER_CERT_LOCALLY:
-		return("unable to get local issuer certificate");
-	case X509_V_ERR_UNABLE_TO_VERIFY_LEAF_SIGNATURE:
-		return("unable to verify the first certificate");
-	case X509_V_ERR_CERT_CHAIN_TOO_LONG:
-		return("certificate chain too long");
-	case X509_V_ERR_CERT_REVOKED:
-		return("certificate revoked");
-	case X509_V_ERR_INVALID_CA:
-		return ("invalid CA certificate");
-	case X509_V_ERR_INVALID_NON_CA:
-		return ("invalid non-CA certificate (has CA markings)");
-	case X509_V_ERR_PATH_LENGTH_EXCEEDED:
-		return ("path length constraint exceeded");
-	case X509_V_ERR_PROXY_PATH_LENGTH_EXCEEDED:
-		return("proxy path length constraint exceeded");
-	case X509_V_ERR_PROXY_CERTIFICATES_NOT_ALLOWED:
-		return("proxy cerificates not allowed, please set the appropriate flag");
-	case X509_V_ERR_INVALID_PURPOSE:
-		return ("unsupported certificate purpose");
-	case X509_V_ERR_CERT_UNTRUSTED:
-		return ("certificate not trusted");
-	case X509_V_ERR_CERT_REJECTED:
-		return ("certificate rejected");
-	case X509_V_ERR_APPLICATION_VERIFICATION:
-		return("application verification failure");
-	case X509_V_ERR_SUBJECT_ISSUER_MISMATCH:
-		return("subject issuer mismatch");
-	case X509_V_ERR_AKID_SKID_MISMATCH:
-		return("authority and subject key identifier mismatch");
-	case X509_V_ERR_AKID_ISSUER_SERIAL_MISMATCH:
-		return("authority and issuer serial number mismatch");
-	case X509_V_ERR_KEYUSAGE_NO_CERTSIGN:
-		return("key usage does not include certificate signing");
-	case X509_V_ERR_UNABLE_TO_GET_CRL_ISSUER:
-		return("unable to get CRL issuer certificate");
-	case X509_V_ERR_UNHANDLED_CRITICAL_EXTENSION:
-		return("unhandled critical extension");
-	case X509_V_ERR_KEYUSAGE_NO_CRL_SIGN:
-		return("key usage does not include CRL signing");
-	case X509_V_ERR_KEYUSAGE_NO_DIGITAL_SIGNATURE:
-		return("key usage does not include digital signature");
-	case X509_V_ERR_UNHANDLED_CRITICAL_CRL_EXTENSION:
-		return("unhandled critical CRL extension");
-	case X509_V_ERR_INVALID_EXTENSION:
-		return("invalid or inconsistent certificate extension");
-	case X509_V_ERR_INVALID_POLICY_EXTENSION:
-		return("invalid or inconsistent certificate policy extension");
-	case X509_V_ERR_NO_EXPLICIT_POLICY:
-		return("no explicit policy");
-	case X509_V_ERR_UNNESTED_RESOURCE:
-		return("RFC 3779 resource not subset of parent's resources");
-	default:
-		BIO_snprintf(buf,sizeof buf,"error number %ld",n);
-		return(buf);
-		}
-	}
-
-
diff --git a/crypto/openssl/crypto/x509/x509_v3.c b/crypto/openssl/crypto/x509/x509_v3.c
deleted file mode 100644
index 42e6f0ab0560..000000000000
--- a/crypto/openssl/crypto/x509/x509_v3.c
+++ /dev/null
@@ -1,274 +0,0 @@
-/* crypto/x509/x509_v3.c */
-/* Copyright (C) 1995-1998 Eric Young (eay@cryptsoft.com)
- * All rights reserved.
- *
- * This package is an SSL implementation written
- * by Eric Young (eay@cryptsoft.com).
- * The implementation was written so as to conform with Netscapes SSL.
- * 
- * This library is free for commercial and non-commercial use as long as
- * the following conditions are aheared to.  The following conditions
- * apply to all code found in this distribution, be it the RC4, RSA,
- * lhash, DES, etc., code; not just the SSL code.  The SSL documentation
- * included with this distribution is covered by the same copyright terms
- * except that the holder is Tim Hudson (tjh@cryptsoft.com).
- * 
- * Copyright remains Eric Young's, and as such any Copyright notices in
- * the code are not to be removed.
- * If this package is used in a product, Eric Young should be given attribution
- * as the author of the parts of the library used.
- * This can be in the form of a textual message at program startup or
- * in documentation (online or textual) provided with the package.
- * 
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions
- * are met:
- * 1. Redistributions of source code must retain the copyright
- *    notice, this list of conditions and the following disclaimer.
- * 2. Redistributions in binary form must reproduce the above copyright
- *    notice, this list of conditions and the following disclaimer in the
- *    documentation and/or other materials provided with the distribution.
- * 3. All advertising materials mentioning features or use of this software
- *    must display the following acknowledgement:
- *    "This product includes cryptographic software written by
- *     Eric Young (eay@cryptsoft.com)"
- *    The word 'cryptographic' can be left out if the rouines from the library
- *    being used are not cryptographic related :-).
- * 4. If you include any Windows specific code (or a derivative thereof) from 
- *    the apps directory (application code) you must include an acknowledgement:
- *    "This product includes software written by Tim Hudson (tjh@cryptsoft.com)"
- * 
- * THIS SOFTWARE IS PROVIDED BY ERIC YOUNG ``AS IS'' AND
- * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
- * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
- * ARE DISCLAIMED.  IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE
- * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
- * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
- * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
- * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
- * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
- * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
- * SUCH DAMAGE.
- * 
- * The licence and distribution terms for any publically available version or
- * derivative of this code cannot be changed.  i.e. this code cannot simply be
- * copied and put under another distribution licence
- * [including the GNU Public Licence.]
- */
-
-#include <stdio.h>
-#include <openssl/stack.h>
-#include "cryptlib.h"
-#include <openssl/asn1.h>
-#include <openssl/objects.h>
-#include <openssl/evp.h>
-#include <openssl/x509.h>
-#include <openssl/x509v3.h>
-
-int X509v3_get_ext_count(const STACK_OF(X509_EXTENSION) *x)
-	{
-	if (x == NULL) return(0);
-	return(sk_X509_EXTENSION_num(x));
-	}
-
-int X509v3_get_ext_by_NID(const STACK_OF(X509_EXTENSION) *x, int nid,
-			  int lastpos)
-	{
-	ASN1_OBJECT *obj;
-
-	obj=OBJ_nid2obj(nid);
-	if (obj == NULL) return(-2);
-	return(X509v3_get_ext_by_OBJ(x,obj,lastpos));
-	}
-
-int X509v3_get_ext_by_OBJ(const STACK_OF(X509_EXTENSION) *sk, ASN1_OBJECT *obj,
-			  int lastpos)
-	{
-	int n;
-	X509_EXTENSION *ex;
-
-	if (sk == NULL) return(-1);
-	lastpos++;
-	if (lastpos < 0)
-		lastpos=0;
-	n=sk_X509_EXTENSION_num(sk);
-	for ( ; lastpos < n; lastpos++)
-		{
-		ex=sk_X509_EXTENSION_value(sk,lastpos);
-		if (OBJ_cmp(ex->object,obj) == 0)
-			return(lastpos);
-		}
-	return(-1);
-	}
-
-int X509v3_get_ext_by_critical(const STACK_OF(X509_EXTENSION) *sk, int crit,
-			       int lastpos)
-	{
-	int n;
-	X509_EXTENSION *ex;
-
-	if (sk == NULL) return(-1);
-	lastpos++;
-	if (lastpos < 0)
-		lastpos=0;
-	n=sk_X509_EXTENSION_num(sk);
-	for ( ; lastpos < n; lastpos++)
-		{
-		ex=sk_X509_EXTENSION_value(sk,lastpos);
-		if (	((ex->critical > 0) && crit) ||
-			((ex->critical <= 0) && !crit))
-			return(lastpos);
-		}
-	return(-1);
-	}
-
-X509_EXTENSION *X509v3_get_ext(const STACK_OF(X509_EXTENSION) *x, int loc)
-	{
-	if (x == NULL || sk_X509_EXTENSION_num(x) <= loc || loc < 0)
-		return NULL;
-	else
-		return sk_X509_EXTENSION_value(x,loc);
-	}
-
-X509_EXTENSION *X509v3_delete_ext(STACK_OF(X509_EXTENSION) *x, int loc)
-	{
-	X509_EXTENSION *ret;
-
-	if (x == NULL || sk_X509_EXTENSION_num(x) <= loc || loc < 0)
-		return(NULL);
-	ret=sk_X509_EXTENSION_delete(x,loc);
-	return(ret);
-	}
-
-STACK_OF(X509_EXTENSION) *X509v3_add_ext(STACK_OF(X509_EXTENSION) **x,
-					 X509_EXTENSION *ex, int loc)
-	{
-	X509_EXTENSION *new_ex=NULL;
-	int n;
-	STACK_OF(X509_EXTENSION) *sk=NULL;
-
-	if (x == NULL)
-		{
-		X509err(X509_F_X509V3_ADD_EXT,ERR_R_PASSED_NULL_PARAMETER);
-		goto err2;
-		}
-
-	if (*x == NULL)
-		{
-		if ((sk=sk_X509_EXTENSION_new_null()) == NULL)
-			goto err;
-		}
-	else
-		sk= *x;
-
-	n=sk_X509_EXTENSION_num(sk);
-	if (loc > n) loc=n;
-	else if (loc < 0) loc=n;
-
-	if ((new_ex=X509_EXTENSION_dup(ex)) == NULL)
-		goto err2;
-	if (!sk_X509_EXTENSION_insert(sk,new_ex,loc))
-		goto err;
-	if (*x == NULL)
-		*x=sk;
-	return(sk);
-err:
-	X509err(X509_F_X509V3_ADD_EXT,ERR_R_MALLOC_FAILURE);
-err2:
-	if (new_ex != NULL) X509_EXTENSION_free(new_ex);
-	if (sk != NULL) sk_X509_EXTENSION_free(sk);
-	return(NULL);
-	}
-
-X509_EXTENSION *X509_EXTENSION_create_by_NID(X509_EXTENSION **ex, int nid,
-	     int crit, ASN1_OCTET_STRING *data)
-	{
-	ASN1_OBJECT *obj;
-	X509_EXTENSION *ret;
-
-	obj=OBJ_nid2obj(nid);
-	if (obj == NULL)
-		{
-		X509err(X509_F_X509_EXTENSION_CREATE_BY_NID,X509_R_UNKNOWN_NID);
-		return(NULL);
-		}
-	ret=X509_EXTENSION_create_by_OBJ(ex,obj,crit,data);
-	if (ret == NULL) ASN1_OBJECT_free(obj);
-	return(ret);
-	}
-
-X509_EXTENSION *X509_EXTENSION_create_by_OBJ(X509_EXTENSION **ex,
-	     ASN1_OBJECT *obj, int crit, ASN1_OCTET_STRING *data)
-	{
-	X509_EXTENSION *ret;
-
-	if ((ex == NULL) || (*ex == NULL))
-		{
-		if ((ret=X509_EXTENSION_new()) == NULL)
-			{
-			X509err(X509_F_X509_EXTENSION_CREATE_BY_OBJ,ERR_R_MALLOC_FAILURE);
-			return(NULL);
-			}
-		}
-	else
-		ret= *ex;
-
-	if (!X509_EXTENSION_set_object(ret,obj))
-		goto err;
-	if (!X509_EXTENSION_set_critical(ret,crit))
-		goto err;
-	if (!X509_EXTENSION_set_data(ret,data))
-		goto err;
-	
-	if ((ex != NULL) && (*ex == NULL)) *ex=ret;
-	return(ret);
-err:
-	if ((ex == NULL) || (ret != *ex))
-		X509_EXTENSION_free(ret);
-	return(NULL);
-	}
-
-int X509_EXTENSION_set_object(X509_EXTENSION *ex, ASN1_OBJECT *obj)
-	{
-	if ((ex == NULL) || (obj == NULL))
-		return(0);
-	ASN1_OBJECT_free(ex->object);
-	ex->object=OBJ_dup(obj);
-	return(1);
-	}
-
-int X509_EXTENSION_set_critical(X509_EXTENSION *ex, int crit)
-	{
-	if (ex == NULL) return(0);
-	ex->critical=(crit)?0xFF:-1;
-	return(1);
-	}
-
-int X509_EXTENSION_set_data(X509_EXTENSION *ex, ASN1_OCTET_STRING *data)
-	{
-	int i;
-
-	if (ex == NULL) return(0);
-	i=M_ASN1_OCTET_STRING_set(ex->value,data->data,data->length);
-	if (!i) return(0);
-	return(1);
-	}
-
-ASN1_OBJECT *X509_EXTENSION_get_object(X509_EXTENSION *ex)
-	{
-	if (ex == NULL) return(NULL);
-	return(ex->object);
-	}
-
-ASN1_OCTET_STRING *X509_EXTENSION_get_data(X509_EXTENSION *ex)
-	{
-	if (ex == NULL) return(NULL);
-	return(ex->value);
-	}
-
-int X509_EXTENSION_get_critical(X509_EXTENSION *ex)
-	{
-	if (ex == NULL) return(0);
-	if(ex->critical > 0) return 1;
-	return 0;
-	}
diff --git a/crypto/openssl/crypto/x509/x509_vfy.c b/crypto/openssl/crypto/x509/x509_vfy.c
deleted file mode 100644
index 07df21f6b975..000000000000
--- a/crypto/openssl/crypto/x509/x509_vfy.c
+++ /dev/null
@@ -1,1548 +0,0 @@
-/* crypto/x509/x509_vfy.c */
-/* Copyright (C) 1995-1998 Eric Young (eay@cryptsoft.com)
- * All rights reserved.
- *
- * This package is an SSL implementation written
- * by Eric Young (eay@cryptsoft.com).
- * The implementation was written so as to conform with Netscapes SSL.
- * 
- * This library is free for commercial and non-commercial use as long as
- * the following conditions are aheared to.  The following conditions
- * apply to all code found in this distribution, be it the RC4, RSA,
- * lhash, DES, etc., code; not just the SSL code.  The SSL documentation
- * included with this distribution is covered by the same copyright terms
- * except that the holder is Tim Hudson (tjh@cryptsoft.com).
- * 
- * Copyright remains Eric Young's, and as such any Copyright notices in
- * the code are not to be removed.
- * If this package is used in a product, Eric Young should be given attribution
- * as the author of the parts of the library used.
- * This can be in the form of a textual message at program startup or
- * in documentation (online or textual) provided with the package.
- * 
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions
- * are met:
- * 1. Redistributions of source code must retain the copyright
- *    notice, this list of conditions and the following disclaimer.
- * 2. Redistributions in binary form must reproduce the above copyright
- *    notice, this list of conditions and the following disclaimer in the
- *    documentation and/or other materials provided with the distribution.
- * 3. All advertising materials mentioning features or use of this software
- *    must display the following acknowledgement:
- *    "This product includes cryptographic software written by
- *     Eric Young (eay@cryptsoft.com)"
- *    The word 'cryptographic' can be left out if the rouines from the library
- *    being used are not cryptographic related :-).
- * 4. If you include any Windows specific code (or a derivative thereof) from 
- *    the apps directory (application code) you must include an acknowledgement:
- *    "This product includes software written by Tim Hudson (tjh@cryptsoft.com)"
- * 
- * THIS SOFTWARE IS PROVIDED BY ERIC YOUNG ``AS IS'' AND
- * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
- * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
- * ARE DISCLAIMED.  IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE
- * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
- * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
- * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
- * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
- * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
- * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
- * SUCH DAMAGE.
- * 
- * The licence and distribution terms for any publically available version or
- * derivative of this code cannot be changed.  i.e. this code cannot simply be
- * copied and put under another distribution licence
- * [including the GNU Public Licence.]
- */
-
-#include <stdio.h>
-#include <time.h>
-#include <errno.h>
-
-#include "cryptlib.h"
-#include <openssl/crypto.h>
-#include <openssl/lhash.h>
-#include <openssl/buffer.h>
-#include <openssl/evp.h>
-#include <openssl/asn1.h>
-#include <openssl/x509.h>
-#include <openssl/x509v3.h>
-#include <openssl/objects.h>
-
-static int null_callback(int ok,X509_STORE_CTX *e);
-static int check_issued(X509_STORE_CTX *ctx, X509 *x, X509 *issuer);
-static X509 *find_issuer(X509_STORE_CTX *ctx, STACK_OF(X509) *sk, X509 *x);
-static int check_chain_extensions(X509_STORE_CTX *ctx);
-static int check_trust(X509_STORE_CTX *ctx);
-static int check_revocation(X509_STORE_CTX *ctx);
-static int check_cert(X509_STORE_CTX *ctx);
-static int check_policy(X509_STORE_CTX *ctx);
-static int internal_verify(X509_STORE_CTX *ctx);
-const char X509_version[]="X.509" OPENSSL_VERSION_PTEXT;
-
-
-static int null_callback(int ok, X509_STORE_CTX *e)
-	{
-	return ok;
-	}
-
-#if 0
-static int x509_subject_cmp(X509 **a, X509 **b)
-	{
-	return X509_subject_name_cmp(*a,*b);
-	}
-#endif
-
-int X509_verify_cert(X509_STORE_CTX *ctx)
-	{
-	X509 *x,*xtmp,*chain_ss=NULL;
-	X509_NAME *xn;
-	int bad_chain = 0;
-	X509_VERIFY_PARAM *param = ctx->param;
-	int depth,i,ok=0;
-	int num;
-	int (*cb)(int xok,X509_STORE_CTX *xctx);
-	STACK_OF(X509) *sktmp=NULL;
-	if (ctx->cert == NULL)
-		{
-		X509err(X509_F_X509_VERIFY_CERT,X509_R_NO_CERT_SET_FOR_US_TO_VERIFY);
-		return -1;
-		}
-
-	cb=ctx->verify_cb;
-
-	/* first we make sure the chain we are going to build is
-	 * present and that the first entry is in place */
-	if (ctx->chain == NULL)
-		{
-		if (	((ctx->chain=sk_X509_new_null()) == NULL) ||
-			(!sk_X509_push(ctx->chain,ctx->cert)))
-			{
-			X509err(X509_F_X509_VERIFY_CERT,ERR_R_MALLOC_FAILURE);
-			goto end;
-			}
-		CRYPTO_add(&ctx->cert->references,1,CRYPTO_LOCK_X509);
-		ctx->last_untrusted=1;
-		}
-
-	/* We use a temporary STACK so we can chop and hack at it */
-	if (ctx->untrusted != NULL
-	    && (sktmp=sk_X509_dup(ctx->untrusted)) == NULL)
-		{
-		X509err(X509_F_X509_VERIFY_CERT,ERR_R_MALLOC_FAILURE);
-		goto end;
-		}
-
-	num=sk_X509_num(ctx->chain);
-	x=sk_X509_value(ctx->chain,num-1);
-	depth=param->depth;
-
-
-	for (;;)
-		{
-		/* If we have enough, we break */
-		if (depth < num) break; /* FIXME: If this happens, we should take
-		                         * note of it and, if appropriate, use the
-		                         * X509_V_ERR_CERT_CHAIN_TOO_LONG error
-		                         * code later.
-		                         */
-
-		/* If we are self signed, we break */
-		xn=X509_get_issuer_name(x);
-		if (ctx->check_issued(ctx, x,x)) break;
-
-		/* If we were passed a cert chain, use it first */
-		if (ctx->untrusted != NULL)
-			{
-			xtmp=find_issuer(ctx, sktmp,x);
-			if (xtmp != NULL)
-				{
-				if (!sk_X509_push(ctx->chain,xtmp))
-					{
-					X509err(X509_F_X509_VERIFY_CERT,ERR_R_MALLOC_FAILURE);
-					goto end;
-					}
-				CRYPTO_add(&xtmp->references,1,CRYPTO_LOCK_X509);
-				sk_X509_delete_ptr(sktmp,xtmp);
-				ctx->last_untrusted++;
-				x=xtmp;
-				num++;
-				/* reparse the full chain for
-				 * the next one */
-				continue;
-				}
-			}
-		break;
-		}
-
-	/* at this point, chain should contain a list of untrusted
-	 * certificates.  We now need to add at least one trusted one,
-	 * if possible, otherwise we complain. */
-
-	/* Examine last certificate in chain and see if it
- 	 * is self signed.
- 	 */
-
-	i=sk_X509_num(ctx->chain);
-	x=sk_X509_value(ctx->chain,i-1);
-	xn = X509_get_subject_name(x);
-	if (ctx->check_issued(ctx, x, x))
-		{
-		/* we have a self signed certificate */
-		if (sk_X509_num(ctx->chain) == 1)
-			{
-			/* We have a single self signed certificate: see if
-			 * we can find it in the store. We must have an exact
-			 * match to avoid possible impersonation.
-			 */
-			ok = ctx->get_issuer(&xtmp, ctx, x);
-			if ((ok <= 0) || X509_cmp(x, xtmp)) 
-				{
-				ctx->error=X509_V_ERR_DEPTH_ZERO_SELF_SIGNED_CERT;
-				ctx->current_cert=x;
-				ctx->error_depth=i-1;
-				if (ok == 1) X509_free(xtmp);
-				bad_chain = 1;
-				ok=cb(0,ctx);
-				if (!ok) goto end;
-				}
-			else 
-				{
-				/* We have a match: replace certificate with store version
-				 * so we get any trust settings.
-				 */
-				X509_free(x);
-				x = xtmp;
-				sk_X509_set(ctx->chain, i - 1, x);
-				ctx->last_untrusted=0;
-				}
-			}
-		else
-			{
-			/* extract and save self signed certificate for later use */
-			chain_ss=sk_X509_pop(ctx->chain);
-			ctx->last_untrusted--;
-			num--;
-			x=sk_X509_value(ctx->chain,num-1);
-			}
-		}
-
-	/* We now lookup certs from the certificate store */
-	for (;;)
-		{
-		/* If we have enough, we break */
-		if (depth < num) break;
-
-		/* If we are self signed, we break */
-		xn=X509_get_issuer_name(x);
-		if (ctx->check_issued(ctx,x,x)) break;
-
-		ok = ctx->get_issuer(&xtmp, ctx, x);
-
-		if (ok < 0) return ok;
-		if (ok == 0) break;
-
-		x = xtmp;
-		if (!sk_X509_push(ctx->chain,x))
-			{
-			X509_free(xtmp);
-			X509err(X509_F_X509_VERIFY_CERT,ERR_R_MALLOC_FAILURE);
-			return 0;
-			}
-		num++;
-		}
-
-	/* we now have our chain, lets check it... */
-	xn=X509_get_issuer_name(x);
-
-	/* Is last certificate looked up self signed? */
-	if (!ctx->check_issued(ctx,x,x))
-		{
-		if ((chain_ss == NULL) || !ctx->check_issued(ctx, x, chain_ss))
-			{
-			if (ctx->last_untrusted >= num)
-				ctx->error=X509_V_ERR_UNABLE_TO_GET_ISSUER_CERT_LOCALLY;
-			else
-				ctx->error=X509_V_ERR_UNABLE_TO_GET_ISSUER_CERT;
-			ctx->current_cert=x;
-			}
-		else
-			{
-
-			sk_X509_push(ctx->chain,chain_ss);
-			num++;
-			ctx->last_untrusted=num;
-			ctx->current_cert=chain_ss;
-			ctx->error=X509_V_ERR_SELF_SIGNED_CERT_IN_CHAIN;
-			chain_ss=NULL;
-			}
-
-		ctx->error_depth=num-1;
-		bad_chain = 1;
-		ok=cb(0,ctx);
-		if (!ok) goto end;
-		}
-
-	/* We have the chain complete: now we need to check its purpose */
-	ok = check_chain_extensions(ctx);
-
-	if (!ok) goto end;
-
-	/* The chain extensions are OK: check trust */
-
-	if (param->trust > 0) ok = check_trust(ctx);
-
-	if (!ok) goto end;
-
-	/* We may as well copy down any DSA parameters that are required */
-	X509_get_pubkey_parameters(NULL,ctx->chain);
-
-	/* Check revocation status: we do this after copying parameters
-	 * because they may be needed for CRL signature verification.
-	 */
-
-	ok = ctx->check_revocation(ctx);
-	if(!ok) goto end;
-
-	/* At this point, we have a chain and need to verify it */
-	if (ctx->verify != NULL)
-		ok=ctx->verify(ctx);
-	else
-		ok=internal_verify(ctx);
-	if(!ok) goto end;
-
-#ifndef OPENSSL_NO_RFC3779
-	/* RFC 3779 path validation, now that CRL check has been done */
-	ok = v3_asid_validate_path(ctx);
-	if (!ok) goto end;
-	ok = v3_addr_validate_path(ctx);
-	if (!ok) goto end;
-#endif
-
-	/* If we get this far evaluate policies */
-	if (!bad_chain && (ctx->param->flags & X509_V_FLAG_POLICY_CHECK))
-		ok = ctx->check_policy(ctx);
-	if(!ok) goto end;
-	if (0)
-		{
-end:
-		X509_get_pubkey_parameters(NULL,ctx->chain);
-		}
-	if (sktmp != NULL) sk_X509_free(sktmp);
-	if (chain_ss != NULL) X509_free(chain_ss);
-	return ok;
-	}
-
-
-/* Given a STACK_OF(X509) find the issuer of cert (if any)
- */
-
-static X509 *find_issuer(X509_STORE_CTX *ctx, STACK_OF(X509) *sk, X509 *x)
-{
-	int i;
-	X509 *issuer;
-	for (i = 0; i < sk_X509_num(sk); i++)
-		{
-		issuer = sk_X509_value(sk, i);
-		if (ctx->check_issued(ctx, x, issuer))
-			return issuer;
-		}
-	return NULL;
-}
-
-/* Given a possible certificate and issuer check them */
-
-static int check_issued(X509_STORE_CTX *ctx, X509 *x, X509 *issuer)
-{
-	int ret;
-	ret = X509_check_issued(issuer, x);
-	if (ret == X509_V_OK)
-		return 1;
-	/* If we haven't asked for issuer errors don't set ctx */
-	if (!(ctx->param->flags & X509_V_FLAG_CB_ISSUER_CHECK))
-		return 0;
-
-	ctx->error = ret;
-	ctx->current_cert = x;
-	ctx->current_issuer = issuer;
-	return ctx->verify_cb(0, ctx);
-	return 0;
-}
-
-/* Alternative lookup method: look from a STACK stored in other_ctx */
-
-static int get_issuer_sk(X509 **issuer, X509_STORE_CTX *ctx, X509 *x)
-{
-	*issuer = find_issuer(ctx, ctx->other_ctx, x);
-	if (*issuer)
-		{
-		CRYPTO_add(&(*issuer)->references,1,CRYPTO_LOCK_X509);
-		return 1;
-		}
-	else
-		return 0;
-}
-	
-
-/* Check a certificate chains extensions for consistency
- * with the supplied purpose
- */
-
-static int check_chain_extensions(X509_STORE_CTX *ctx)
-{
-#ifdef OPENSSL_NO_CHAIN_VERIFY
-	return 1;
-#else
-	int i, ok=0, must_be_ca;
-	X509 *x;
-	int (*cb)(int xok,X509_STORE_CTX *xctx);
-	int proxy_path_length = 0;
-	int allow_proxy_certs =
-		!!(ctx->param->flags & X509_V_FLAG_ALLOW_PROXY_CERTS);
-	cb=ctx->verify_cb;
-
-	/* must_be_ca can have 1 of 3 values:
-	   -1: we accept both CA and non-CA certificates, to allow direct
-	       use of self-signed certificates (which are marked as CA).
-	   0:  we only accept non-CA certificates.  This is currently not
-	       used, but the possibility is present for future extensions.
-	   1:  we only accept CA certificates.  This is currently used for
-	       all certificates in the chain except the leaf certificate.
-	*/
-	must_be_ca = -1;
-
-	/* A hack to keep people who don't want to modify their software
-	   happy */
-	if (getenv("OPENSSL_ALLOW_PROXY_CERTS"))
-		allow_proxy_certs = 1;
-
-	/* Check all untrusted certificates */
-	for (i = 0; i < ctx->last_untrusted; i++)
-		{
-		int ret;
-		x = sk_X509_value(ctx->chain, i);
-		if (!(ctx->param->flags & X509_V_FLAG_IGNORE_CRITICAL)
-			&& (x->ex_flags & EXFLAG_CRITICAL))
-			{
-			ctx->error = X509_V_ERR_UNHANDLED_CRITICAL_EXTENSION;
-			ctx->error_depth = i;
-			ctx->current_cert = x;
-			ok=cb(0,ctx);
-			if (!ok) goto end;
-			}
-		if (!allow_proxy_certs && (x->ex_flags & EXFLAG_PROXY))
-			{
-			ctx->error = X509_V_ERR_PROXY_CERTIFICATES_NOT_ALLOWED;
-			ctx->error_depth = i;
-			ctx->current_cert = x;
-			ok=cb(0,ctx);
-			if (!ok) goto end;
-			}
-		ret = X509_check_ca(x);
-		switch(must_be_ca)
-			{
-		case -1:
-			if ((ctx->param->flags & X509_V_FLAG_X509_STRICT)
-				&& (ret != 1) && (ret != 0))
-				{
-				ret = 0;
-				ctx->error = X509_V_ERR_INVALID_CA;
-				}
-			else
-				ret = 1;
-			break;
-		case 0:
-			if (ret != 0)
-				{
-				ret = 0;
-				ctx->error = X509_V_ERR_INVALID_NON_CA;
-				}
-			else
-				ret = 1;
-			break;
-		default:
-			if ((ret == 0)
-				|| ((ctx->param->flags & X509_V_FLAG_X509_STRICT)
-					&& (ret != 1)))
-				{
-				ret = 0;
-				ctx->error = X509_V_ERR_INVALID_CA;
-				}
-			else
-				ret = 1;
-			break;
-			}
-		if (ret == 0)
-			{
-			ctx->error_depth = i;
-			ctx->current_cert = x;
-			ok=cb(0,ctx);
-			if (!ok) goto end;
-			}
-		if (ctx->param->purpose > 0)
-			{
-			ret = X509_check_purpose(x, ctx->param->purpose,
-				must_be_ca > 0);
-			if ((ret == 0)
-				|| ((ctx->param->flags & X509_V_FLAG_X509_STRICT)
-					&& (ret != 1)))
-				{
-				ctx->error = X509_V_ERR_INVALID_PURPOSE;
-				ctx->error_depth = i;
-				ctx->current_cert = x;
-				ok=cb(0,ctx);
-				if (!ok) goto end;
-				}
-			}
-		/* Check pathlen */
-		if ((i > 1) && (x->ex_pathlen != -1)
-			   && (i > (x->ex_pathlen + proxy_path_length + 1)))
-			{
-			ctx->error = X509_V_ERR_PATH_LENGTH_EXCEEDED;
-			ctx->error_depth = i;
-			ctx->current_cert = x;
-			ok=cb(0,ctx);
-			if (!ok) goto end;
-			}
-		/* If this certificate is a proxy certificate, the next
-		   certificate must be another proxy certificate or a EE
-		   certificate.  If not, the next certificate must be a
-		   CA certificate.  */
-		if (x->ex_flags & EXFLAG_PROXY)
-			{
-			if (x->ex_pcpathlen != -1 && i > x->ex_pcpathlen)
-				{
-				ctx->error =
-					X509_V_ERR_PROXY_PATH_LENGTH_EXCEEDED;
-				ctx->error_depth = i;
-				ctx->current_cert = x;
-				ok=cb(0,ctx);
-				if (!ok) goto end;
-				}
-			proxy_path_length++;
-			must_be_ca = 0;
-			}
-		else
-			must_be_ca = 1;
-		}
-	ok = 1;
- end:
-	return ok;
-#endif
-}
-
-static int check_trust(X509_STORE_CTX *ctx)
-{
-#ifdef OPENSSL_NO_CHAIN_VERIFY
-	return 1;
-#else
-	int i, ok;
-	X509 *x;
-	int (*cb)(int xok,X509_STORE_CTX *xctx);
-	cb=ctx->verify_cb;
-/* For now just check the last certificate in the chain */
-	i = sk_X509_num(ctx->chain) - 1;
-	x = sk_X509_value(ctx->chain, i);
-	ok = X509_check_trust(x, ctx->param->trust, 0);
-	if (ok == X509_TRUST_TRUSTED)
-		return 1;
-	ctx->error_depth = i;
-	ctx->current_cert = x;
-	if (ok == X509_TRUST_REJECTED)
-		ctx->error = X509_V_ERR_CERT_REJECTED;
-	else
-		ctx->error = X509_V_ERR_CERT_UNTRUSTED;
-	ok = cb(0, ctx);
-	return ok;
-#endif
-}
-
-static int check_revocation(X509_STORE_CTX *ctx)
-	{
-	int i, last, ok;
-	if (!(ctx->param->flags & X509_V_FLAG_CRL_CHECK))
-		return 1;
-	if (ctx->param->flags & X509_V_FLAG_CRL_CHECK_ALL)
-		last = sk_X509_num(ctx->chain) - 1;
-	else
-		last = 0;
-	for(i = 0; i <= last; i++)
-		{
-		ctx->error_depth = i;
-		ok = check_cert(ctx);
-		if (!ok) return ok;
-		}
-	return 1;
-	}
-
-static int check_cert(X509_STORE_CTX *ctx)
-	{
-	X509_CRL *crl = NULL;
-	X509 *x;
-	int ok, cnum;
-	cnum = ctx->error_depth;
-	x = sk_X509_value(ctx->chain, cnum);
-	ctx->current_cert = x;
-	/* Try to retrieve relevant CRL */
-	ok = ctx->get_crl(ctx, &crl, x);
-	/* If error looking up CRL, nothing we can do except
-	 * notify callback
-	 */
-	if(!ok)
-		{
-		ctx->error = X509_V_ERR_UNABLE_TO_GET_CRL;
-		ok = ctx->verify_cb(0, ctx);
-		goto err;
-		}
-	ctx->current_crl = crl;
-	ok = ctx->check_crl(ctx, crl);
-	if (!ok) goto err;
-	ok = ctx->cert_crl(ctx, crl, x);
-	err:
-	ctx->current_crl = NULL;
-	X509_CRL_free(crl);
-	return ok;
-
-	}
-
-/* Check CRL times against values in X509_STORE_CTX */
-
-static int check_crl_time(X509_STORE_CTX *ctx, X509_CRL *crl, int notify)
-	{
-	time_t *ptime;
-	int i;
-	ctx->current_crl = crl;
-	if (ctx->param->flags & X509_V_FLAG_USE_CHECK_TIME)
-		ptime = &ctx->param->check_time;
-	else
-		ptime = NULL;
-
-	i=X509_cmp_time(X509_CRL_get_lastUpdate(crl), ptime);
-	if (i == 0)
-		{
-		ctx->error=X509_V_ERR_ERROR_IN_CRL_LAST_UPDATE_FIELD;
-		if (!notify || !ctx->verify_cb(0, ctx))
-			return 0;
-		}
-
-	if (i > 0)
-		{
-		ctx->error=X509_V_ERR_CRL_NOT_YET_VALID;
-		if (!notify || !ctx->verify_cb(0, ctx))
-			return 0;
-		}
-
-	if(X509_CRL_get_nextUpdate(crl))
-		{
-		i=X509_cmp_time(X509_CRL_get_nextUpdate(crl), ptime);
-
-		if (i == 0)
-			{
-			ctx->error=X509_V_ERR_ERROR_IN_CRL_NEXT_UPDATE_FIELD;
-			if (!notify || !ctx->verify_cb(0, ctx))
-				return 0;
-			}
-
-		if (i < 0)
-			{
-			ctx->error=X509_V_ERR_CRL_HAS_EXPIRED;
-			if (!notify || !ctx->verify_cb(0, ctx))
-				return 0;
-			}
-		}
-
-	ctx->current_crl = NULL;
-
-	return 1;
-	}
-
-/* Lookup CRLs from the supplied list. Look for matching isser name
- * and validity. If we can't find a valid CRL return the last one
- * with matching name. This gives more meaningful error codes. Otherwise
- * we'd get a CRL not found error if a CRL existed with matching name but
- * was invalid.
- */
-
-static int get_crl_sk(X509_STORE_CTX *ctx, X509_CRL **pcrl,
-			X509_NAME *nm, STACK_OF(X509_CRL) *crls)
-	{
-	int i;
-	X509_CRL *crl, *best_crl = NULL;
-	for (i = 0; i < sk_X509_CRL_num(crls); i++)
-		{
-		crl = sk_X509_CRL_value(crls, i);
-		if (X509_NAME_cmp(nm, X509_CRL_get_issuer(crl)))
-			continue;
-		if (check_crl_time(ctx, crl, 0))
-			{
-			*pcrl = crl;
-			CRYPTO_add(&crl->references, 1, CRYPTO_LOCK_X509);
-			return 1;
-			}
-		best_crl = crl;
-		}
-	if (best_crl)
-		{
-		*pcrl = best_crl;
-		CRYPTO_add(&best_crl->references, 1, CRYPTO_LOCK_X509);
-		}
-		
-	return 0;
-	}
-
-/* Retrieve CRL corresponding to certificate: currently just a
- * subject lookup: maybe use AKID later...
- */
-static int get_crl(X509_STORE_CTX *ctx, X509_CRL **pcrl, X509 *x)
-	{
-	int ok;
-	X509_CRL *crl = NULL;
-	X509_OBJECT xobj;
-	X509_NAME *nm;
-	nm = X509_get_issuer_name(x);
-	ok = get_crl_sk(ctx, &crl, nm, ctx->crls);
-	if (ok)
-		{
-		*pcrl = crl;
-		return 1;
-		}
-
-	ok = X509_STORE_get_by_subject(ctx, X509_LU_CRL, nm, &xobj);
-
-	if (!ok)
-		{
-		/* If we got a near match from get_crl_sk use that */
-		if (crl)
-			{
-			*pcrl = crl;
-			return 1;
-			}
-		return 0;
-		}
-
-	*pcrl = xobj.data.crl;
-	if (crl)
-		X509_CRL_free(crl);
-	return 1;
-	}
-
-/* Check CRL validity */
-static int check_crl(X509_STORE_CTX *ctx, X509_CRL *crl)
-	{
-	X509 *issuer = NULL;
-	EVP_PKEY *ikey = NULL;
-	int ok = 0, chnum, cnum;
-	cnum = ctx->error_depth;
-	chnum = sk_X509_num(ctx->chain) - 1;
-	/* Find CRL issuer: if not last certificate then issuer
-	 * is next certificate in chain.
-	 */
-	if(cnum < chnum)
-		issuer = sk_X509_value(ctx->chain, cnum + 1);
-	else
-		{
-		issuer = sk_X509_value(ctx->chain, chnum);
-		/* If not self signed, can't check signature */
-		if(!ctx->check_issued(ctx, issuer, issuer))
-			{
-			ctx->error = X509_V_ERR_UNABLE_TO_GET_CRL_ISSUER;
-			ok = ctx->verify_cb(0, ctx);
-			if(!ok) goto err;
-			}
-		}
-
-	if(issuer)
-		{
-		/* Check for cRLSign bit if keyUsage present */
-		if ((issuer->ex_flags & EXFLAG_KUSAGE) &&
-			!(issuer->ex_kusage & KU_CRL_SIGN))
-			{
-			ctx->error = X509_V_ERR_KEYUSAGE_NO_CRL_SIGN;
-			ok = ctx->verify_cb(0, ctx);
-			if(!ok) goto err;
-			}
-
-		/* Attempt to get issuer certificate public key */
-		ikey = X509_get_pubkey(issuer);
-
-		if(!ikey)
-			{
-			ctx->error=X509_V_ERR_UNABLE_TO_DECODE_ISSUER_PUBLIC_KEY;
-			ok = ctx->verify_cb(0, ctx);
-			if (!ok) goto err;
-			}
-		else
-			{
-			/* Verify CRL signature */
-			if(X509_CRL_verify(crl, ikey) <= 0)
-				{
-				ctx->error=X509_V_ERR_CRL_SIGNATURE_FAILURE;
-				ok = ctx->verify_cb(0, ctx);
-				if (!ok) goto err;
-				}
-			}
-		}
-
-	ok = check_crl_time(ctx, crl, 1);
-	if (!ok)
-		goto err;
-
-	ok = 1;
-
-	err:
-	EVP_PKEY_free(ikey);
-	return ok;
-	}
-
-/* Check certificate against CRL */
-static int cert_crl(X509_STORE_CTX *ctx, X509_CRL *crl, X509 *x)
-	{
-	int idx, ok;
-	X509_REVOKED rtmp;
-	STACK_OF(X509_EXTENSION) *exts;
-	X509_EXTENSION *ext;
-	/* Look for serial number of certificate in CRL */
-	rtmp.serialNumber = X509_get_serialNumber(x);
-	/* Sort revoked into serial number order if not already sorted.
-	 * Do this under a lock to avoid race condition.
- 	 */
-	if (!sk_X509_REVOKED_is_sorted(crl->crl->revoked))
-		{
-		CRYPTO_w_lock(CRYPTO_LOCK_X509_CRL);
-		sk_X509_REVOKED_sort(crl->crl->revoked);
-		CRYPTO_w_unlock(CRYPTO_LOCK_X509_CRL);
-		}
-	idx = sk_X509_REVOKED_find(crl->crl->revoked, &rtmp);
-	/* If found assume revoked: want something cleverer than
-	 * this to handle entry extensions in V2 CRLs.
-	 */
-	if(idx >= 0)
-		{
-		ctx->error = X509_V_ERR_CERT_REVOKED;
-		ok = ctx->verify_cb(0, ctx);
-		if (!ok) return 0;
-		}
-
-	if (ctx->param->flags & X509_V_FLAG_IGNORE_CRITICAL)
-		return 1;
-
-	/* See if we have any critical CRL extensions: since we
-	 * currently don't handle any CRL extensions the CRL must be
-	 * rejected. 
-	 * This code accesses the X509_CRL structure directly: applications
-	 * shouldn't do this.
-	 */
-
-	exts = crl->crl->extensions;
-
-	for (idx = 0; idx < sk_X509_EXTENSION_num(exts); idx++)
-		{
-		ext = sk_X509_EXTENSION_value(exts, idx);
-		if (ext->critical > 0)
-			{
-			ctx->error =
-				X509_V_ERR_UNHANDLED_CRITICAL_CRL_EXTENSION;
-			ok = ctx->verify_cb(0, ctx);
-			if(!ok) return 0;
-			break;
-			}
-		}
-	return 1;
-	}
-
-static int check_policy(X509_STORE_CTX *ctx)
-	{
-	int ret;
-	ret = X509_policy_check(&ctx->tree, &ctx->explicit_policy, ctx->chain,
-				ctx->param->policies, ctx->param->flags);
-	if (ret == 0)
-		{
-		X509err(X509_F_CHECK_POLICY,ERR_R_MALLOC_FAILURE);
-		return 0;
-		}
-	/* Invalid or inconsistent extensions */
-	if (ret == -1)
-		{
-		/* Locate certificates with bad extensions and notify
-		 * callback.
-		 */
-		X509 *x;
-		int i;
-		for (i = 1; i < sk_X509_num(ctx->chain); i++)
-			{
-			x = sk_X509_value(ctx->chain, i);
-			if (!(x->ex_flags & EXFLAG_INVALID_POLICY))
-				continue;
-			ctx->current_cert = x;
-			ctx->error = X509_V_ERR_INVALID_POLICY_EXTENSION;
-			ret = ctx->verify_cb(0, ctx);
-			}
-		return 1;
-		}
-	if (ret == -2)
-		{
-		ctx->current_cert = NULL;
-		ctx->error = X509_V_ERR_NO_EXPLICIT_POLICY;
-		return ctx->verify_cb(0, ctx);
-		}
-
-	if (ctx->param->flags & X509_V_FLAG_NOTIFY_POLICY)
-		{
-		ctx->current_cert = NULL;
-		ctx->error = X509_V_OK;
-		if (!ctx->verify_cb(2, ctx))
-			return 0;
-		}
-
-	return 1;
-	}
-
-static int check_cert_time(X509_STORE_CTX *ctx, X509 *x)
-	{
-	time_t *ptime;
-	int i;
-
-	if (ctx->param->flags & X509_V_FLAG_USE_CHECK_TIME)
-		ptime = &ctx->param->check_time;
-	else
-		ptime = NULL;
-
-	i=X509_cmp_time(X509_get_notBefore(x), ptime);
-	if (i == 0)
-		{
-		ctx->error=X509_V_ERR_ERROR_IN_CERT_NOT_BEFORE_FIELD;
-		ctx->current_cert=x;
-		if (!ctx->verify_cb(0, ctx))
-			return 0;
-		}
-
-	if (i > 0)
-		{
-		ctx->error=X509_V_ERR_CERT_NOT_YET_VALID;
-		ctx->current_cert=x;
-		if (!ctx->verify_cb(0, ctx))
-			return 0;
-		}
-
-	i=X509_cmp_time(X509_get_notAfter(x), ptime);
-	if (i == 0)
-		{
-		ctx->error=X509_V_ERR_ERROR_IN_CERT_NOT_AFTER_FIELD;
-		ctx->current_cert=x;
-		if (!ctx->verify_cb(0, ctx))
-			return 0;
-		}
-
-	if (i < 0)
-		{
-		ctx->error=X509_V_ERR_CERT_HAS_EXPIRED;
-		ctx->current_cert=x;
-		if (!ctx->verify_cb(0, ctx))
-			return 0;
-		}
-
-	return 1;
-	}
-
-static int internal_verify(X509_STORE_CTX *ctx)
-	{
-	int ok=0,n;
-	X509 *xs,*xi;
-	EVP_PKEY *pkey=NULL;
-	int (*cb)(int xok,X509_STORE_CTX *xctx);
-
-	cb=ctx->verify_cb;
-
-	n=sk_X509_num(ctx->chain);
-	ctx->error_depth=n-1;
-	n--;
-	xi=sk_X509_value(ctx->chain,n);
-
-	if (ctx->check_issued(ctx, xi, xi))
-		xs=xi;
-	else
-		{
-		if (n <= 0)
-			{
-			ctx->error=X509_V_ERR_UNABLE_TO_VERIFY_LEAF_SIGNATURE;
-			ctx->current_cert=xi;
-			ok=cb(0,ctx);
-			goto end;
-			}
-		else
-			{
-			n--;
-			ctx->error_depth=n;
-			xs=sk_X509_value(ctx->chain,n);
-			}
-		}
-
-/*	ctx->error=0;  not needed */
-	while (n >= 0)
-		{
-		ctx->error_depth=n;
-		if (!xs->valid)
-			{
-			if ((pkey=X509_get_pubkey(xi)) == NULL)
-				{
-				ctx->error=X509_V_ERR_UNABLE_TO_DECODE_ISSUER_PUBLIC_KEY;
-				ctx->current_cert=xi;
-				ok=(*cb)(0,ctx);
-				if (!ok) goto end;
-				}
-			else if (X509_verify(xs,pkey) <= 0)
-				/* XXX  For the final trusted self-signed cert,
-				 * this is a waste of time.  That check should
-				 * optional so that e.g. 'openssl x509' can be
-				 * used to detect invalid self-signatures, but
-				 * we don't verify again and again in SSL
-				 * handshakes and the like once the cert has
-				 * been declared trusted. */
-				{
-				ctx->error=X509_V_ERR_CERT_SIGNATURE_FAILURE;
-				ctx->current_cert=xs;
-				ok=(*cb)(0,ctx);
-				if (!ok)
-					{
-					EVP_PKEY_free(pkey);
-					goto end;
-					}
-				}
-			EVP_PKEY_free(pkey);
-			pkey=NULL;
-			}
-
-		xs->valid = 1;
-
-		ok = check_cert_time(ctx, xs);
-		if (!ok)
-			goto end;
-
-		/* The last error (if any) is still in the error value */
-		ctx->current_issuer=xi;
-		ctx->current_cert=xs;
-		ok=(*cb)(1,ctx);
-		if (!ok) goto end;
-
-		n--;
-		if (n >= 0)
-			{
-			xi=xs;
-			xs=sk_X509_value(ctx->chain,n);
-			}
-		}
-	ok=1;
-end:
-	return ok;
-	}
-
-int X509_cmp_current_time(ASN1_TIME *ctm)
-{
-	return X509_cmp_time(ctm, NULL);
-}
-
-int X509_cmp_time(ASN1_TIME *ctm, time_t *cmp_time)
-	{
-	char *str;
-	ASN1_TIME atm;
-	long offset;
-	char buff1[24],buff2[24],*p;
-	int i,j;
-
-	p=buff1;
-	i=ctm->length;
-	str=(char *)ctm->data;
-	if (ctm->type == V_ASN1_UTCTIME)
-		{
-		if ((i < 11) || (i > 17)) return 0;
-		memcpy(p,str,10);
-		p+=10;
-		str+=10;
-		}
-	else
-		{
-		if (i < 13) return 0;
-		memcpy(p,str,12);
-		p+=12;
-		str+=12;
-		}
-
-	if ((*str == 'Z') || (*str == '-') || (*str == '+'))
-		{ *(p++)='0'; *(p++)='0'; }
-	else
-		{ 
-		*(p++)= *(str++);
-		*(p++)= *(str++);
-		/* Skip any fractional seconds... */
-		if (*str == '.')
-			{
-			str++;
-			while ((*str >= '0') && (*str <= '9')) str++;
-			}
-		
-		}
-	*(p++)='Z';
-	*(p++)='\0';
-
-	if (*str == 'Z')
-		offset=0;
-	else
-		{
-		if ((*str != '+') && (*str != '-'))
-			return 0;
-		offset=((str[1]-'0')*10+(str[2]-'0'))*60;
-		offset+=(str[3]-'0')*10+(str[4]-'0');
-		if (*str == '-')
-			offset= -offset;
-		}
-	atm.type=ctm->type;
-	atm.length=sizeof(buff2);
-	atm.data=(unsigned char *)buff2;
-
-	if (X509_time_adj(&atm,-offset*60, cmp_time) == NULL)
-		return 0;
-
-	if (ctm->type == V_ASN1_UTCTIME)
-		{
-		i=(buff1[0]-'0')*10+(buff1[1]-'0');
-		if (i < 50) i+=100; /* cf. RFC 2459 */
-		j=(buff2[0]-'0')*10+(buff2[1]-'0');
-		if (j < 50) j+=100;
-
-		if (i < j) return -1;
-		if (i > j) return 1;
-		}
-	i=strcmp(buff1,buff2);
-	if (i == 0) /* wait a second then return younger :-) */
-		return -1;
-	else
-		return i;
-	}
-
-ASN1_TIME *X509_gmtime_adj(ASN1_TIME *s, long adj)
-{
-	return X509_time_adj(s, adj, NULL);
-}
-
-ASN1_TIME *X509_time_adj(ASN1_TIME *s, long adj, time_t *in_tm)
-	{
-	time_t t;
-	int type = -1;
-
-	if (in_tm) t = *in_tm;
-	else time(&t);
-
-	t+=adj;
-	if (s) type = s->type;
-	if (type == V_ASN1_UTCTIME) return ASN1_UTCTIME_set(s,t);
-	if (type == V_ASN1_GENERALIZEDTIME) return ASN1_GENERALIZEDTIME_set(s, t);
-	return ASN1_TIME_set(s, t);
-	}
-
-int X509_get_pubkey_parameters(EVP_PKEY *pkey, STACK_OF(X509) *chain)
-	{
-	EVP_PKEY *ktmp=NULL,*ktmp2;
-	int i,j;
-
-	if ((pkey != NULL) && !EVP_PKEY_missing_parameters(pkey)) return 1;
-
-	for (i=0; i<sk_X509_num(chain); i++)
-		{
-		ktmp=X509_get_pubkey(sk_X509_value(chain,i));
-		if (ktmp == NULL)
-			{
-			X509err(X509_F_X509_GET_PUBKEY_PARAMETERS,X509_R_UNABLE_TO_GET_CERTS_PUBLIC_KEY);
-			return 0;
-			}
-		if (!EVP_PKEY_missing_parameters(ktmp))
-			break;
-		else
-			{
-			EVP_PKEY_free(ktmp);
-			ktmp=NULL;
-			}
-		}
-	if (ktmp == NULL)
-		{
-		X509err(X509_F_X509_GET_PUBKEY_PARAMETERS,X509_R_UNABLE_TO_FIND_PARAMETERS_IN_CHAIN);
-		return 0;
-		}
-
-	/* first, populate the other certs */
-	for (j=i-1; j >= 0; j--)
-		{
-		ktmp2=X509_get_pubkey(sk_X509_value(chain,j));
-		EVP_PKEY_copy_parameters(ktmp2,ktmp);
-		EVP_PKEY_free(ktmp2);
-		}
-	
-	if (pkey != NULL) EVP_PKEY_copy_parameters(pkey,ktmp);
-	EVP_PKEY_free(ktmp);
-	return 1;
-	}
-
-int X509_STORE_CTX_get_ex_new_index(long argl, void *argp, CRYPTO_EX_new *new_func,
-	     CRYPTO_EX_dup *dup_func, CRYPTO_EX_free *free_func)
-	{
-	/* This function is (usually) called only once, by
-	 * SSL_get_ex_data_X509_STORE_CTX_idx (ssl/ssl_cert.c). */
-	return CRYPTO_get_ex_new_index(CRYPTO_EX_INDEX_X509_STORE_CTX, argl, argp,
-			new_func, dup_func, free_func);
-	}
-
-int X509_STORE_CTX_set_ex_data(X509_STORE_CTX *ctx, int idx, void *data)
-	{
-	return CRYPTO_set_ex_data(&ctx->ex_data,idx,data);
-	}
-
-void *X509_STORE_CTX_get_ex_data(X509_STORE_CTX *ctx, int idx)
-	{
-	return CRYPTO_get_ex_data(&ctx->ex_data,idx);
-	}
-
-int X509_STORE_CTX_get_error(X509_STORE_CTX *ctx)
-	{
-	return ctx->error;
-	}
-
-void X509_STORE_CTX_set_error(X509_STORE_CTX *ctx, int err)
-	{
-	ctx->error=err;
-	}
-
-int X509_STORE_CTX_get_error_depth(X509_STORE_CTX *ctx)
-	{
-	return ctx->error_depth;
-	}
-
-X509 *X509_STORE_CTX_get_current_cert(X509_STORE_CTX *ctx)
-	{
-	return ctx->current_cert;
-	}
-
-STACK_OF(X509) *X509_STORE_CTX_get_chain(X509_STORE_CTX *ctx)
-	{
-	return ctx->chain;
-	}
-
-STACK_OF(X509) *X509_STORE_CTX_get1_chain(X509_STORE_CTX *ctx)
-	{
-	int i;
-	X509 *x;
-	STACK_OF(X509) *chain;
-	if (!ctx->chain || !(chain = sk_X509_dup(ctx->chain))) return NULL;
-	for (i = 0; i < sk_X509_num(chain); i++)
-		{
-		x = sk_X509_value(chain, i);
-		CRYPTO_add(&x->references, 1, CRYPTO_LOCK_X509);
-		}
-	return chain;
-	}
-
-void X509_STORE_CTX_set_cert(X509_STORE_CTX *ctx, X509 *x)
-	{
-	ctx->cert=x;
-	}
-
-void X509_STORE_CTX_set_chain(X509_STORE_CTX *ctx, STACK_OF(X509) *sk)
-	{
-	ctx->untrusted=sk;
-	}
-
-void X509_STORE_CTX_set0_crls(X509_STORE_CTX *ctx, STACK_OF(X509_CRL) *sk)
-	{
-	ctx->crls=sk;
-	}
-
-int X509_STORE_CTX_set_purpose(X509_STORE_CTX *ctx, int purpose)
-	{
-	return X509_STORE_CTX_purpose_inherit(ctx, 0, purpose, 0);
-	}
-
-int X509_STORE_CTX_set_trust(X509_STORE_CTX *ctx, int trust)
-	{
-	return X509_STORE_CTX_purpose_inherit(ctx, 0, 0, trust);
-	}
-
-/* This function is used to set the X509_STORE_CTX purpose and trust
- * values. This is intended to be used when another structure has its
- * own trust and purpose values which (if set) will be inherited by
- * the ctx. If they aren't set then we will usually have a default
- * purpose in mind which should then be used to set the trust value.
- * An example of this is SSL use: an SSL structure will have its own
- * purpose and trust settings which the application can set: if they
- * aren't set then we use the default of SSL client/server.
- */
-
-int X509_STORE_CTX_purpose_inherit(X509_STORE_CTX *ctx, int def_purpose,
-				int purpose, int trust)
-{
-	int idx;
-	/* If purpose not set use default */
-	if (!purpose) purpose = def_purpose;
-	/* If we have a purpose then check it is valid */
-	if (purpose)
-		{
-		X509_PURPOSE *ptmp;
-		idx = X509_PURPOSE_get_by_id(purpose);
-		if (idx == -1)
-			{
-			X509err(X509_F_X509_STORE_CTX_PURPOSE_INHERIT,
-						X509_R_UNKNOWN_PURPOSE_ID);
-			return 0;
-			}
-		ptmp = X509_PURPOSE_get0(idx);
-		if (ptmp->trust == X509_TRUST_DEFAULT)
-			{
-			idx = X509_PURPOSE_get_by_id(def_purpose);
-			if (idx == -1)
-				{
-				X509err(X509_F_X509_STORE_CTX_PURPOSE_INHERIT,
-						X509_R_UNKNOWN_PURPOSE_ID);
-				return 0;
-				}
-			ptmp = X509_PURPOSE_get0(idx);
-			}
-		/* If trust not set then get from purpose default */
-		if (!trust) trust = ptmp->trust;
-		}
-	if (trust)
-		{
-		idx = X509_TRUST_get_by_id(trust);
-		if (idx == -1)
-			{
-			X509err(X509_F_X509_STORE_CTX_PURPOSE_INHERIT,
-						X509_R_UNKNOWN_TRUST_ID);
-			return 0;
-			}
-		}
-
-	if (purpose && !ctx->param->purpose) ctx->param->purpose = purpose;
-	if (trust && !ctx->param->trust) ctx->param->trust = trust;
-	return 1;
-}
-
-X509_STORE_CTX *X509_STORE_CTX_new(void)
-{
-	X509_STORE_CTX *ctx;
-	ctx = (X509_STORE_CTX *)OPENSSL_malloc(sizeof(X509_STORE_CTX));
-	if (!ctx)
-		{
-		X509err(X509_F_X509_STORE_CTX_NEW,ERR_R_MALLOC_FAILURE);
-		return NULL;
-		}
-	memset(ctx, 0, sizeof(X509_STORE_CTX));
-	return ctx;
-}
-
-void X509_STORE_CTX_free(X509_STORE_CTX *ctx)
-{
-	X509_STORE_CTX_cleanup(ctx);
-	OPENSSL_free(ctx);
-}
-
-int X509_STORE_CTX_init(X509_STORE_CTX *ctx, X509_STORE *store, X509 *x509,
-	     STACK_OF(X509) *chain)
-	{
-	int ret = 1;
-	ctx->ctx=store;
-	ctx->current_method=0;
-	ctx->cert=x509;
-	ctx->untrusted=chain;
-	ctx->crls = NULL;
-	ctx->last_untrusted=0;
-	ctx->other_ctx=NULL;
-	ctx->valid=0;
-	ctx->chain=NULL;
-	ctx->error=0;
-	ctx->explicit_policy=0;
-	ctx->error_depth=0;
-	ctx->current_cert=NULL;
-	ctx->current_issuer=NULL;
-	ctx->tree = NULL;
-
-	ctx->param = X509_VERIFY_PARAM_new();
-
-	if (!ctx->param)
-		{
-		X509err(X509_F_X509_STORE_CTX_INIT,ERR_R_MALLOC_FAILURE);
-		return 0;
-		}
-
-	/* Inherit callbacks and flags from X509_STORE if not set
-	 * use defaults.
-	 */
-
-
-	if (store)
-		ret = X509_VERIFY_PARAM_inherit(ctx->param, store->param);
-	else
-		ctx->param->flags |= X509_VP_FLAG_DEFAULT|X509_VP_FLAG_ONCE;
-
-	if (store)
-		{
-		ctx->verify_cb = store->verify_cb;
-		ctx->cleanup = store->cleanup;
-		}
-	else
-		ctx->cleanup = 0;
-
-	if (ret)
-		ret = X509_VERIFY_PARAM_inherit(ctx->param,
-					X509_VERIFY_PARAM_lookup("default"));
-
-	if (ret == 0)
-		{
-		X509err(X509_F_X509_STORE_CTX_INIT,ERR_R_MALLOC_FAILURE);
-		return 0;
-		}
-
-	if (store && store->check_issued)
-		ctx->check_issued = store->check_issued;
-	else
-		ctx->check_issued = check_issued;
-
-	if (store && store->get_issuer)
-		ctx->get_issuer = store->get_issuer;
-	else
-		ctx->get_issuer = X509_STORE_CTX_get1_issuer;
-
-	if (store && store->verify_cb)
-		ctx->verify_cb = store->verify_cb;
-	else
-		ctx->verify_cb = null_callback;
-
-	if (store && store->verify)
-		ctx->verify = store->verify;
-	else
-		ctx->verify = internal_verify;
-
-	if (store && store->check_revocation)
-		ctx->check_revocation = store->check_revocation;
-	else
-		ctx->check_revocation = check_revocation;
-
-	if (store && store->get_crl)
-		ctx->get_crl = store->get_crl;
-	else
-		ctx->get_crl = get_crl;
-
-	if (store && store->check_crl)
-		ctx->check_crl = store->check_crl;
-	else
-		ctx->check_crl = check_crl;
-
-	if (store && store->cert_crl)
-		ctx->cert_crl = store->cert_crl;
-	else
-		ctx->cert_crl = cert_crl;
-
-	ctx->check_policy = check_policy;
-
-
-	/* This memset() can't make any sense anyway, so it's removed. As
-	 * X509_STORE_CTX_cleanup does a proper "free" on the ex_data, we put a
-	 * corresponding "new" here and remove this bogus initialisation. */
-	/* memset(&(ctx->ex_data),0,sizeof(CRYPTO_EX_DATA)); */
-	if(!CRYPTO_new_ex_data(CRYPTO_EX_INDEX_X509_STORE_CTX, ctx,
-				&(ctx->ex_data)))
-		{
-		OPENSSL_free(ctx);
-		X509err(X509_F_X509_STORE_CTX_INIT,ERR_R_MALLOC_FAILURE);
-		return 0;
-		}
-	return 1;
-	}
-
-/* Set alternative lookup method: just a STACK of trusted certificates.
- * This avoids X509_STORE nastiness where it isn't needed.
- */
-
-void X509_STORE_CTX_trusted_stack(X509_STORE_CTX *ctx, STACK_OF(X509) *sk)
-{
-	ctx->other_ctx = sk;
-	ctx->get_issuer = get_issuer_sk;
-}
-
-void X509_STORE_CTX_cleanup(X509_STORE_CTX *ctx)
-	{
-	if (ctx->cleanup) ctx->cleanup(ctx);
-	if (ctx->param != NULL)
-		{
-		X509_VERIFY_PARAM_free(ctx->param);
-		ctx->param=NULL;
-		}
-	if (ctx->tree != NULL)
-		{
-		X509_policy_tree_free(ctx->tree);
-		ctx->tree=NULL;
-		}
-	if (ctx->chain != NULL)
-		{
-		sk_X509_pop_free(ctx->chain,X509_free);
-		ctx->chain=NULL;
-		}
-	CRYPTO_free_ex_data(CRYPTO_EX_INDEX_X509_STORE_CTX, ctx, &(ctx->ex_data));
-	memset(&ctx->ex_data,0,sizeof(CRYPTO_EX_DATA));
-	}
-
-void X509_STORE_CTX_set_depth(X509_STORE_CTX *ctx, int depth)
-	{
-	X509_VERIFY_PARAM_set_depth(ctx->param, depth);
-	}
-
-void X509_STORE_CTX_set_flags(X509_STORE_CTX *ctx, unsigned long flags)
-	{
-	X509_VERIFY_PARAM_set_flags(ctx->param, flags);
-	}
-
-void X509_STORE_CTX_set_time(X509_STORE_CTX *ctx, unsigned long flags, time_t t)
-	{
-	X509_VERIFY_PARAM_set_time(ctx->param, t);
-	}
-
-void X509_STORE_CTX_set_verify_cb(X509_STORE_CTX *ctx,
-				  int (*verify_cb)(int, X509_STORE_CTX *))
-	{
-	ctx->verify_cb=verify_cb;
-	}
-
-X509_POLICY_TREE *X509_STORE_CTX_get0_policy_tree(X509_STORE_CTX *ctx)
-	{
-	return ctx->tree;
-	}
-
-int X509_STORE_CTX_get_explicit_policy(X509_STORE_CTX *ctx)
-	{
-	return ctx->explicit_policy;
-	}
-
-int X509_STORE_CTX_set_default(X509_STORE_CTX *ctx, const char *name)
-	{
-	const X509_VERIFY_PARAM *param;
-	param = X509_VERIFY_PARAM_lookup(name);
-	if (!param)
-		return 0;
-	return X509_VERIFY_PARAM_inherit(ctx->param, param);
-	}
-
-X509_VERIFY_PARAM *X509_STORE_CTX_get0_param(X509_STORE_CTX *ctx)
-	{
-	return ctx->param;
-	}
-
-void X509_STORE_CTX_set0_param(X509_STORE_CTX *ctx, X509_VERIFY_PARAM *param)
-	{
-	if (ctx->param)
-		X509_VERIFY_PARAM_free(ctx->param);
-	ctx->param = param;
-	}
-
-IMPLEMENT_STACK_OF(X509)
-IMPLEMENT_ASN1_SET_OF(X509)
-
-IMPLEMENT_STACK_OF(X509_NAME)
-
-IMPLEMENT_STACK_OF(X509_ATTRIBUTE)
-IMPLEMENT_ASN1_SET_OF(X509_ATTRIBUTE)
diff --git a/crypto/openssl/crypto/x509/x509_vfy.h b/crypto/openssl/crypto/x509/x509_vfy.h
deleted file mode 100644
index 76c76e171936..000000000000
--- a/crypto/openssl/crypto/x509/x509_vfy.h
+++ /dev/null
@@ -1,531 +0,0 @@
-/* crypto/x509/x509_vfy.h */
-/* Copyright (C) 1995-1998 Eric Young (eay@cryptsoft.com)
- * All rights reserved.
- *
- * This package is an SSL implementation written
- * by Eric Young (eay@cryptsoft.com).
- * The implementation was written so as to conform with Netscapes SSL.
- * 
- * This library is free for commercial and non-commercial use as long as
- * the following conditions are aheared to.  The following conditions
- * apply to all code found in this distribution, be it the RC4, RSA,
- * lhash, DES, etc., code; not just the SSL code.  The SSL documentation
- * included with this distribution is covered by the same copyright terms
- * except that the holder is Tim Hudson (tjh@cryptsoft.com).
- * 
- * Copyright remains Eric Young's, and as such any Copyright notices in
- * the code are not to be removed.
- * If this package is used in a product, Eric Young should be given attribution
- * as the author of the parts of the library used.
- * This can be in the form of a textual message at program startup or
- * in documentation (online or textual) provided with the package.
- * 
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions
- * are met:
- * 1. Redistributions of source code must retain the copyright
- *    notice, this list of conditions and the following disclaimer.
- * 2. Redistributions in binary form must reproduce the above copyright
- *    notice, this list of conditions and the following disclaimer in the
- *    documentation and/or other materials provided with the distribution.
- * 3. All advertising materials mentioning features or use of this software
- *    must display the following acknowledgement:
- *    "This product includes cryptographic software written by
- *     Eric Young (eay@cryptsoft.com)"
- *    The word 'cryptographic' can be left out if the rouines from the library
- *    being used are not cryptographic related :-).
- * 4. If you include any Windows specific code (or a derivative thereof) from 
- *    the apps directory (application code) you must include an acknowledgement:
- *    "This product includes software written by Tim Hudson (tjh@cryptsoft.com)"
- * 
- * THIS SOFTWARE IS PROVIDED BY ERIC YOUNG ``AS IS'' AND
- * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
- * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
- * ARE DISCLAIMED.  IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE
- * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
- * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
- * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
- * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
- * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
- * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
- * SUCH DAMAGE.
- * 
- * The licence and distribution terms for any publically available version or
- * derivative of this code cannot be changed.  i.e. this code cannot simply be
- * copied and put under another distribution licence
- * [including the GNU Public Licence.]
- */
-
-#ifndef HEADER_X509_H
-#include <openssl/x509.h>
-/* openssl/x509.h ends up #include-ing this file at about the only
- * appropriate moment. */
-#endif
-
-#ifndef HEADER_X509_VFY_H
-#define HEADER_X509_VFY_H
-
-#include <openssl/opensslconf.h>
-#ifndef OPENSSL_NO_LHASH
-#include <openssl/lhash.h>
-#endif
-#include <openssl/bio.h>
-#include <openssl/crypto.h>
-#include <openssl/symhacks.h>
-
-#ifdef  __cplusplus
-extern "C" {
-#endif
-
-/* Outer object */
-typedef struct x509_hash_dir_st
-	{
-	int num_dirs;
-	char **dirs;
-	int *dirs_type;
-	int num_dirs_alloced;
-	} X509_HASH_DIR_CTX;
-
-typedef struct x509_file_st
-	{
-	int num_paths;	/* number of paths to files or directories */
-	int num_alloced;
-	char **paths;	/* the list of paths or directories */
-	int *path_type;
-	} X509_CERT_FILE_CTX;
-
-/*******************************/
-/*
-SSL_CTX -> X509_STORE    
-		-> X509_LOOKUP
-			->X509_LOOKUP_METHOD
-		-> X509_LOOKUP
-			->X509_LOOKUP_METHOD
- 
-SSL	-> X509_STORE_CTX
-		->X509_STORE    
-
-The X509_STORE holds the tables etc for verification stuff.
-A X509_STORE_CTX is used while validating a single certificate.
-The X509_STORE has X509_LOOKUPs for looking up certs.
-The X509_STORE then calls a function to actually verify the
-certificate chain.
-*/
-
-#define X509_LU_RETRY		-1
-#define X509_LU_FAIL		0
-#define X509_LU_X509		1
-#define X509_LU_CRL		2
-#define X509_LU_PKEY		3
-
-typedef struct x509_object_st
-	{
-	/* one of the above types */
-	int type;
-	union	{
-		char *ptr;
-		X509 *x509;
-		X509_CRL *crl;
-		EVP_PKEY *pkey;
-		} data;
-	} X509_OBJECT;
-
-typedef struct x509_lookup_st X509_LOOKUP;
-
-DECLARE_STACK_OF(X509_LOOKUP)
-DECLARE_STACK_OF(X509_OBJECT)
-
-/* This is a static that defines the function interface */
-typedef struct x509_lookup_method_st
-	{
-	const char *name;
-	int (*new_item)(X509_LOOKUP *ctx);
-	void (*free)(X509_LOOKUP *ctx);
-	int (*init)(X509_LOOKUP *ctx);
-	int (*shutdown)(X509_LOOKUP *ctx);
-	int (*ctrl)(X509_LOOKUP *ctx,int cmd,const char *argc,long argl,
-			char **ret);
-	int (*get_by_subject)(X509_LOOKUP *ctx,int type,X509_NAME *name,
-			      X509_OBJECT *ret);
-	int (*get_by_issuer_serial)(X509_LOOKUP *ctx,int type,X509_NAME *name,
-				    ASN1_INTEGER *serial,X509_OBJECT *ret);
-	int (*get_by_fingerprint)(X509_LOOKUP *ctx,int type,
-				  unsigned char *bytes,int len,
-				  X509_OBJECT *ret);
-	int (*get_by_alias)(X509_LOOKUP *ctx,int type,char *str,int len,
-			    X509_OBJECT *ret);
-	} X509_LOOKUP_METHOD;
-
-/* This structure hold all parameters associated with a verify operation
- * by including an X509_VERIFY_PARAM structure in related structures the
- * parameters used can be customized
- */
-
-typedef struct X509_VERIFY_PARAM_st
-	{
-	char *name;
-	time_t check_time;	/* Time to use */
-	unsigned long inh_flags; /* Inheritance flags */
-	unsigned long flags;	/* Various verify flags */
-	int purpose;		/* purpose to check untrusted certificates */
-	int trust;		/* trust setting to check */
-	int depth;		/* Verify depth */
-	STACK_OF(ASN1_OBJECT) *policies;	/* Permissible policies */
-	} X509_VERIFY_PARAM;
-
-DECLARE_STACK_OF(X509_VERIFY_PARAM)
-
-/* This is used to hold everything.  It is used for all certificate
- * validation.  Once we have a certificate chain, the 'verify'
- * function is then called to actually check the cert chain. */
-struct x509_store_st
-	{
-	/* The following is a cache of trusted certs */
-	int cache; 	/* if true, stash any hits */
-	STACK_OF(X509_OBJECT) *objs;	/* Cache of all objects */
-
-	/* These are external lookup methods */
-	STACK_OF(X509_LOOKUP) *get_cert_methods;
-
-	X509_VERIFY_PARAM *param;
-
-	/* Callbacks for various operations */
-	int (*verify)(X509_STORE_CTX *ctx);	/* called to verify a certificate */
-	int (*verify_cb)(int ok,X509_STORE_CTX *ctx);	/* error callback */
-	int (*get_issuer)(X509 **issuer, X509_STORE_CTX *ctx, X509 *x);	/* get issuers cert from ctx */
-	int (*check_issued)(X509_STORE_CTX *ctx, X509 *x, X509 *issuer); /* check issued */
-	int (*check_revocation)(X509_STORE_CTX *ctx); /* Check revocation status of chain */
-	int (*get_crl)(X509_STORE_CTX *ctx, X509_CRL **crl, X509 *x); /* retrieve CRL */
-	int (*check_crl)(X509_STORE_CTX *ctx, X509_CRL *crl); /* Check CRL validity */
-	int (*cert_crl)(X509_STORE_CTX *ctx, X509_CRL *crl, X509 *x); /* Check certificate against CRL */
-	int (*cleanup)(X509_STORE_CTX *ctx);
-
-	CRYPTO_EX_DATA ex_data;
-	int references;
-	} /* X509_STORE */;
-
-int X509_STORE_set_depth(X509_STORE *store, int depth);
-
-#define X509_STORE_set_verify_cb_func(ctx,func) ((ctx)->verify_cb=(func))
-#define X509_STORE_set_verify_func(ctx,func)	((ctx)->verify=(func))
-
-/* This is the functions plus an instance of the local variables. */
-struct x509_lookup_st
-	{
-	int init;			/* have we been started */
-	int skip;			/* don't use us. */
-	X509_LOOKUP_METHOD *method;	/* the functions */
-	char *method_data;		/* method data */
-
-	X509_STORE *store_ctx;	/* who owns us */
-	} /* X509_LOOKUP */;
-
-/* This is a used when verifying cert chains.  Since the
- * gathering of the cert chain can take some time (and have to be
- * 'retried', this needs to be kept and passed around. */
-struct x509_store_ctx_st      /* X509_STORE_CTX */
-	{
-	X509_STORE *ctx;
-	int current_method;	/* used when looking up certs */
-
-	/* The following are set by the caller */
-	X509 *cert;		/* The cert to check */
-	STACK_OF(X509) *untrusted;	/* chain of X509s - untrusted - passed in */
-	STACK_OF(X509_CRL) *crls;	/* set of CRLs passed in */
-
-	X509_VERIFY_PARAM *param;
-	void *other_ctx;	/* Other info for use with get_issuer() */
-
-	/* Callbacks for various operations */
-	int (*verify)(X509_STORE_CTX *ctx);	/* called to verify a certificate */
-	int (*verify_cb)(int ok,X509_STORE_CTX *ctx);		/* error callback */
-	int (*get_issuer)(X509 **issuer, X509_STORE_CTX *ctx, X509 *x);	/* get issuers cert from ctx */
-	int (*check_issued)(X509_STORE_CTX *ctx, X509 *x, X509 *issuer); /* check issued */
-	int (*check_revocation)(X509_STORE_CTX *ctx); /* Check revocation status of chain */
-	int (*get_crl)(X509_STORE_CTX *ctx, X509_CRL **crl, X509 *x); /* retrieve CRL */
-	int (*check_crl)(X509_STORE_CTX *ctx, X509_CRL *crl); /* Check CRL validity */
-	int (*cert_crl)(X509_STORE_CTX *ctx, X509_CRL *crl, X509 *x); /* Check certificate against CRL */
-	int (*check_policy)(X509_STORE_CTX *ctx);
-	int (*cleanup)(X509_STORE_CTX *ctx);
-
-	/* The following is built up */
-	int valid;		/* if 0, rebuild chain */
-	int last_untrusted;	/* index of last untrusted cert */
-	STACK_OF(X509) *chain; 		/* chain of X509s - built up and trusted */
-	X509_POLICY_TREE *tree;	/* Valid policy tree */
-
-	int explicit_policy;	/* Require explicit policy value */
-
-	/* When something goes wrong, this is why */
-	int error_depth;
-	int error;
-	X509 *current_cert;
-	X509 *current_issuer;	/* cert currently being tested as valid issuer */
-	X509_CRL *current_crl;	/* current CRL */
-
-	CRYPTO_EX_DATA ex_data;
-	} /* X509_STORE_CTX */;
-
-void X509_STORE_CTX_set_depth(X509_STORE_CTX *ctx, int depth);
-
-#define X509_STORE_CTX_set_app_data(ctx,data) \
-	X509_STORE_CTX_set_ex_data(ctx,0,data)
-#define X509_STORE_CTX_get_app_data(ctx) \
-	X509_STORE_CTX_get_ex_data(ctx,0)
-
-#define X509_L_FILE_LOAD	1
-#define X509_L_ADD_DIR		2
-
-#define X509_LOOKUP_load_file(x,name,type) \
-		X509_LOOKUP_ctrl((x),X509_L_FILE_LOAD,(name),(long)(type),NULL)
-
-#define X509_LOOKUP_add_dir(x,name,type) \
-		X509_LOOKUP_ctrl((x),X509_L_ADD_DIR,(name),(long)(type),NULL)
-
-#define		X509_V_OK					0
-/* illegal error (for uninitialized values, to avoid X509_V_OK): 1 */
-
-#define		X509_V_ERR_UNABLE_TO_GET_ISSUER_CERT		2
-#define		X509_V_ERR_UNABLE_TO_GET_CRL			3
-#define		X509_V_ERR_UNABLE_TO_DECRYPT_CERT_SIGNATURE	4
-#define		X509_V_ERR_UNABLE_TO_DECRYPT_CRL_SIGNATURE	5
-#define		X509_V_ERR_UNABLE_TO_DECODE_ISSUER_PUBLIC_KEY	6
-#define		X509_V_ERR_CERT_SIGNATURE_FAILURE		7
-#define		X509_V_ERR_CRL_SIGNATURE_FAILURE		8
-#define		X509_V_ERR_CERT_NOT_YET_VALID			9
-#define		X509_V_ERR_CERT_HAS_EXPIRED			10
-#define		X509_V_ERR_CRL_NOT_YET_VALID			11
-#define		X509_V_ERR_CRL_HAS_EXPIRED			12
-#define		X509_V_ERR_ERROR_IN_CERT_NOT_BEFORE_FIELD	13
-#define		X509_V_ERR_ERROR_IN_CERT_NOT_AFTER_FIELD	14
-#define		X509_V_ERR_ERROR_IN_CRL_LAST_UPDATE_FIELD	15
-#define		X509_V_ERR_ERROR_IN_CRL_NEXT_UPDATE_FIELD	16
-#define		X509_V_ERR_OUT_OF_MEM				17
-#define		X509_V_ERR_DEPTH_ZERO_SELF_SIGNED_CERT		18
-#define		X509_V_ERR_SELF_SIGNED_CERT_IN_CHAIN		19
-#define		X509_V_ERR_UNABLE_TO_GET_ISSUER_CERT_LOCALLY	20
-#define		X509_V_ERR_UNABLE_TO_VERIFY_LEAF_SIGNATURE	21
-#define		X509_V_ERR_CERT_CHAIN_TOO_LONG			22
-#define		X509_V_ERR_CERT_REVOKED				23
-#define		X509_V_ERR_INVALID_CA				24
-#define		X509_V_ERR_PATH_LENGTH_EXCEEDED			25
-#define		X509_V_ERR_INVALID_PURPOSE			26
-#define		X509_V_ERR_CERT_UNTRUSTED			27
-#define		X509_V_ERR_CERT_REJECTED			28
-/* These are 'informational' when looking for issuer cert */
-#define		X509_V_ERR_SUBJECT_ISSUER_MISMATCH		29
-#define		X509_V_ERR_AKID_SKID_MISMATCH			30
-#define		X509_V_ERR_AKID_ISSUER_SERIAL_MISMATCH		31
-#define		X509_V_ERR_KEYUSAGE_NO_CERTSIGN			32
-
-#define		X509_V_ERR_UNABLE_TO_GET_CRL_ISSUER		33
-#define		X509_V_ERR_UNHANDLED_CRITICAL_EXTENSION		34
-#define		X509_V_ERR_KEYUSAGE_NO_CRL_SIGN			35
-#define		X509_V_ERR_UNHANDLED_CRITICAL_CRL_EXTENSION	36
-#define		X509_V_ERR_INVALID_NON_CA			37
-#define		X509_V_ERR_PROXY_PATH_LENGTH_EXCEEDED		38
-#define		X509_V_ERR_KEYUSAGE_NO_DIGITAL_SIGNATURE	39
-#define		X509_V_ERR_PROXY_CERTIFICATES_NOT_ALLOWED	40
-
-#define		X509_V_ERR_INVALID_EXTENSION			41
-#define		X509_V_ERR_INVALID_POLICY_EXTENSION		42
-#define		X509_V_ERR_NO_EXPLICIT_POLICY			43
-
-#define		X509_V_ERR_UNNESTED_RESOURCE			44
-
-/* The application is not happy */
-#define		X509_V_ERR_APPLICATION_VERIFICATION		50
-
-/* Certificate verify flags */
-
-/* Send issuer+subject checks to verify_cb */
-#define	X509_V_FLAG_CB_ISSUER_CHECK		0x1
-/* Use check time instead of current time */
-#define	X509_V_FLAG_USE_CHECK_TIME		0x2
-/* Lookup CRLs */
-#define	X509_V_FLAG_CRL_CHECK			0x4
-/* Lookup CRLs for whole chain */
-#define	X509_V_FLAG_CRL_CHECK_ALL		0x8
-/* Ignore unhandled critical extensions */
-#define	X509_V_FLAG_IGNORE_CRITICAL		0x10
-/* Disable workarounds for broken certificates */
-#define	X509_V_FLAG_X509_STRICT			0x20
-/* Enable proxy certificate validation */
-#define	X509_V_FLAG_ALLOW_PROXY_CERTS		0x40
-/* Enable policy checking */
-#define X509_V_FLAG_POLICY_CHECK		0x80
-/* Policy variable require-explicit-policy */
-#define X509_V_FLAG_EXPLICIT_POLICY		0x100
-/* Policy variable inhibit-any-policy */
-#define	X509_V_FLAG_INHIBIT_ANY			0x200
-/* Policy variable inhibit-policy-mapping */
-#define X509_V_FLAG_INHIBIT_MAP			0x400
-/* Notify callback that policy is OK */
-#define X509_V_FLAG_NOTIFY_POLICY		0x800
-
-#define X509_VP_FLAG_DEFAULT			0x1
-#define X509_VP_FLAG_OVERWRITE			0x2
-#define X509_VP_FLAG_RESET_FLAGS		0x4
-#define X509_VP_FLAG_LOCKED			0x8
-#define X509_VP_FLAG_ONCE			0x10
-
-/* Internal use: mask of policy related options */
-#define X509_V_FLAG_POLICY_MASK (X509_V_FLAG_POLICY_CHECK \
-				| X509_V_FLAG_EXPLICIT_POLICY \
-				| X509_V_FLAG_INHIBIT_ANY \
-				| X509_V_FLAG_INHIBIT_MAP)
-
-int X509_OBJECT_idx_by_subject(STACK_OF(X509_OBJECT) *h, int type,
-	     X509_NAME *name);
-X509_OBJECT *X509_OBJECT_retrieve_by_subject(STACK_OF(X509_OBJECT) *h,int type,X509_NAME *name);
-X509_OBJECT *X509_OBJECT_retrieve_match(STACK_OF(X509_OBJECT) *h, X509_OBJECT *x);
-void X509_OBJECT_up_ref_count(X509_OBJECT *a);
-void X509_OBJECT_free_contents(X509_OBJECT *a);
-X509_STORE *X509_STORE_new(void );
-void X509_STORE_free(X509_STORE *v);
-
-int X509_STORE_set_flags(X509_STORE *ctx, unsigned long flags);
-int X509_STORE_set_purpose(X509_STORE *ctx, int purpose);
-int X509_STORE_set_trust(X509_STORE *ctx, int trust);
-int X509_STORE_set1_param(X509_STORE *ctx, X509_VERIFY_PARAM *pm);
-
-X509_STORE_CTX *X509_STORE_CTX_new(void);
-
-int X509_STORE_CTX_get1_issuer(X509 **issuer, X509_STORE_CTX *ctx, X509 *x);
-
-void X509_STORE_CTX_free(X509_STORE_CTX *ctx);
-int X509_STORE_CTX_init(X509_STORE_CTX *ctx, X509_STORE *store,
-			 X509 *x509, STACK_OF(X509) *chain);
-void X509_STORE_CTX_trusted_stack(X509_STORE_CTX *ctx, STACK_OF(X509) *sk);
-void X509_STORE_CTX_cleanup(X509_STORE_CTX *ctx);
-
-X509_LOOKUP *X509_STORE_add_lookup(X509_STORE *v, X509_LOOKUP_METHOD *m);
-
-X509_LOOKUP_METHOD *X509_LOOKUP_hash_dir(void);
-X509_LOOKUP_METHOD *X509_LOOKUP_file(void);
-
-int X509_STORE_add_cert(X509_STORE *ctx, X509 *x);
-int X509_STORE_add_crl(X509_STORE *ctx, X509_CRL *x);
-
-int X509_STORE_get_by_subject(X509_STORE_CTX *vs,int type,X509_NAME *name,
-	X509_OBJECT *ret);
-
-int X509_LOOKUP_ctrl(X509_LOOKUP *ctx, int cmd, const char *argc,
-	long argl, char **ret);
-
-#ifndef OPENSSL_NO_STDIO
-int X509_load_cert_file(X509_LOOKUP *ctx, const char *file, int type);
-int X509_load_crl_file(X509_LOOKUP *ctx, const char *file, int type);
-int X509_load_cert_crl_file(X509_LOOKUP *ctx, const char *file, int type);
-#endif
-
-
-X509_LOOKUP *X509_LOOKUP_new(X509_LOOKUP_METHOD *method);
-void X509_LOOKUP_free(X509_LOOKUP *ctx);
-int X509_LOOKUP_init(X509_LOOKUP *ctx);
-int X509_LOOKUP_by_subject(X509_LOOKUP *ctx, int type, X509_NAME *name,
-	X509_OBJECT *ret);
-int X509_LOOKUP_by_issuer_serial(X509_LOOKUP *ctx, int type, X509_NAME *name,
-	ASN1_INTEGER *serial, X509_OBJECT *ret);
-int X509_LOOKUP_by_fingerprint(X509_LOOKUP *ctx, int type,
-	unsigned char *bytes, int len, X509_OBJECT *ret);
-int X509_LOOKUP_by_alias(X509_LOOKUP *ctx, int type, char *str,
-	int len, X509_OBJECT *ret);
-int X509_LOOKUP_shutdown(X509_LOOKUP *ctx);
-
-#ifndef OPENSSL_NO_STDIO
-int	X509_STORE_load_locations (X509_STORE *ctx,
-		const char *file, const char *dir);
-int	X509_STORE_set_default_paths(X509_STORE *ctx);
-#endif
-
-int X509_STORE_CTX_get_ex_new_index(long argl, void *argp, CRYPTO_EX_new *new_func,
-	CRYPTO_EX_dup *dup_func, CRYPTO_EX_free *free_func);
-int	X509_STORE_CTX_set_ex_data(X509_STORE_CTX *ctx,int idx,void *data);
-void *	X509_STORE_CTX_get_ex_data(X509_STORE_CTX *ctx,int idx);
-int	X509_STORE_CTX_get_error(X509_STORE_CTX *ctx);
-void	X509_STORE_CTX_set_error(X509_STORE_CTX *ctx,int s);
-int	X509_STORE_CTX_get_error_depth(X509_STORE_CTX *ctx);
-X509 *	X509_STORE_CTX_get_current_cert(X509_STORE_CTX *ctx);
-STACK_OF(X509) *X509_STORE_CTX_get_chain(X509_STORE_CTX *ctx);
-STACK_OF(X509) *X509_STORE_CTX_get1_chain(X509_STORE_CTX *ctx);
-void	X509_STORE_CTX_set_cert(X509_STORE_CTX *c,X509 *x);
-void	X509_STORE_CTX_set_chain(X509_STORE_CTX *c,STACK_OF(X509) *sk);
-void	X509_STORE_CTX_set0_crls(X509_STORE_CTX *c,STACK_OF(X509_CRL) *sk);
-int X509_STORE_CTX_set_purpose(X509_STORE_CTX *ctx, int purpose);
-int X509_STORE_CTX_set_trust(X509_STORE_CTX *ctx, int trust);
-int X509_STORE_CTX_purpose_inherit(X509_STORE_CTX *ctx, int def_purpose,
-				int purpose, int trust);
-void X509_STORE_CTX_set_flags(X509_STORE_CTX *ctx, unsigned long flags);
-void X509_STORE_CTX_set_time(X509_STORE_CTX *ctx, unsigned long flags,
-								time_t t);
-void X509_STORE_CTX_set_verify_cb(X509_STORE_CTX *ctx,
-				  int (*verify_cb)(int, X509_STORE_CTX *));
-  
-X509_POLICY_TREE *X509_STORE_CTX_get0_policy_tree(X509_STORE_CTX *ctx);
-int X509_STORE_CTX_get_explicit_policy(X509_STORE_CTX *ctx);
-
-X509_VERIFY_PARAM *X509_STORE_CTX_get0_param(X509_STORE_CTX *ctx);
-void X509_STORE_CTX_set0_param(X509_STORE_CTX *ctx, X509_VERIFY_PARAM *param);
-int X509_STORE_CTX_set_default(X509_STORE_CTX *ctx, const char *name);
-
-/* X509_VERIFY_PARAM functions */
-
-X509_VERIFY_PARAM *X509_VERIFY_PARAM_new(void);
-void X509_VERIFY_PARAM_free(X509_VERIFY_PARAM *param);
-int X509_VERIFY_PARAM_inherit(X509_VERIFY_PARAM *to,
-						const X509_VERIFY_PARAM *from);
-int X509_VERIFY_PARAM_set1(X509_VERIFY_PARAM *to, 
-						const X509_VERIFY_PARAM *from);
-int X509_VERIFY_PARAM_set1_name(X509_VERIFY_PARAM *param, const char *name);
-int X509_VERIFY_PARAM_set_flags(X509_VERIFY_PARAM *param, unsigned long flags);
-int X509_VERIFY_PARAM_clear_flags(X509_VERIFY_PARAM *param,
-							unsigned long flags);
-unsigned long X509_VERIFY_PARAM_get_flags(X509_VERIFY_PARAM *param);
-int X509_VERIFY_PARAM_set_purpose(X509_VERIFY_PARAM *param, int purpose);
-int X509_VERIFY_PARAM_set_trust(X509_VERIFY_PARAM *param, int trust);
-void X509_VERIFY_PARAM_set_depth(X509_VERIFY_PARAM *param, int depth);
-void X509_VERIFY_PARAM_set_time(X509_VERIFY_PARAM *param, time_t t);
-int X509_VERIFY_PARAM_add0_policy(X509_VERIFY_PARAM *param,
-						ASN1_OBJECT *policy);
-int X509_VERIFY_PARAM_set1_policies(X509_VERIFY_PARAM *param, 
-					STACK_OF(ASN1_OBJECT) *policies);
-int X509_VERIFY_PARAM_get_depth(const X509_VERIFY_PARAM *param);
-
-int X509_VERIFY_PARAM_add0_table(X509_VERIFY_PARAM *param);
-const X509_VERIFY_PARAM *X509_VERIFY_PARAM_lookup(const char *name);
-void X509_VERIFY_PARAM_table_cleanup(void);
-
-int X509_policy_check(X509_POLICY_TREE **ptree, int *pexplicit_policy,
-			STACK_OF(X509) *certs,
-			STACK_OF(ASN1_OBJECT) *policy_oids,
-			unsigned int flags);
-
-void X509_policy_tree_free(X509_POLICY_TREE *tree);
-
-int X509_policy_tree_level_count(const X509_POLICY_TREE *tree);
-X509_POLICY_LEVEL *
-	X509_policy_tree_get0_level(const X509_POLICY_TREE *tree, int i);
-
-STACK_OF(X509_POLICY_NODE) *
-	X509_policy_tree_get0_policies(const X509_POLICY_TREE *tree);
-
-STACK_OF(X509_POLICY_NODE) *
-	X509_policy_tree_get0_user_policies(const X509_POLICY_TREE *tree);
-
-int X509_policy_level_node_count(X509_POLICY_LEVEL *level);
-
-X509_POLICY_NODE *X509_policy_level_get0_node(X509_POLICY_LEVEL *level, int i);
-
-const ASN1_OBJECT *X509_policy_node_get0_policy(const X509_POLICY_NODE *node);
-
-STACK_OF(POLICYQUALINFO) *
-	X509_policy_node_get0_qualifiers(const X509_POLICY_NODE *node);
-const X509_POLICY_NODE *
-	X509_policy_node_get0_parent(const X509_POLICY_NODE *node);
-
-#ifdef  __cplusplus
-}
-#endif
-#endif
-
diff --git a/crypto/openssl/crypto/x509/x509_vpm.c b/crypto/openssl/crypto/x509/x509_vpm.c
deleted file mode 100644
index 5e69259a7934..000000000000
--- a/crypto/openssl/crypto/x509/x509_vpm.c
+++ /dev/null
@@ -1,420 +0,0 @@
-/* x509_vpm.c */
-/* Written by Dr Stephen N Henson (shenson@bigfoot.com) for the OpenSSL
- * project 2004.
- */
-/* ====================================================================
- * Copyright (c) 2004 The OpenSSL Project.  All rights reserved.
- *
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions
- * are met:
- *
- * 1. Redistributions of source code must retain the above copyright
- *    notice, this list of conditions and the following disclaimer. 
- *
- * 2. Redistributions in binary form must reproduce the above copyright
- *    notice, this list of conditions and the following disclaimer in
- *    the documentation and/or other materials provided with the
- *    distribution.
- *
- * 3. All advertising materials mentioning features or use of this
- *    software must display the following acknowledgment:
- *    "This product includes software developed by the OpenSSL Project
- *    for use in the OpenSSL Toolkit. (http://www.OpenSSL.org/)"
- *
- * 4. The names "OpenSSL Toolkit" and "OpenSSL Project" must not be used to
- *    endorse or promote products derived from this software without
- *    prior written permission. For written permission, please contact
- *    licensing@OpenSSL.org.
- *
- * 5. Products derived from this software may not be called "OpenSSL"
- *    nor may "OpenSSL" appear in their names without prior written
- *    permission of the OpenSSL Project.
- *
- * 6. Redistributions of any form whatsoever must retain the following
- *    acknowledgment:
- *    "This product includes software developed by the OpenSSL Project
- *    for use in the OpenSSL Toolkit (http://www.OpenSSL.org/)"
- *
- * THIS SOFTWARE IS PROVIDED BY THE OpenSSL PROJECT ``AS IS'' AND ANY
- * EXPRESSED OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
- * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR
- * PURPOSE ARE DISCLAIMED.  IN NO EVENT SHALL THE OpenSSL PROJECT OR
- * ITS CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
- * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
- * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
- * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
- * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
- * STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
- * ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED
- * OF THE POSSIBILITY OF SUCH DAMAGE.
- * ====================================================================
- *
- * This product includes cryptographic software written by Eric Young
- * (eay@cryptsoft.com).  This product includes software written by Tim
- * Hudson (tjh@cryptsoft.com).
- *
- */
-
-#include <stdio.h>
-
-#include "cryptlib.h"
-#include <openssl/crypto.h>
-#include <openssl/lhash.h>
-#include <openssl/buffer.h>
-#include <openssl/x509.h>
-#include <openssl/x509v3.h>
-
-/* X509_VERIFY_PARAM functions */
-
-static void x509_verify_param_zero(X509_VERIFY_PARAM *param)
-	{
-	if (!param)
-		return;
-	param->name = NULL;
-	param->purpose = 0;
-	param->trust = 0;
-	param->inh_flags = X509_VP_FLAG_DEFAULT;
-	param->flags = 0;
-	param->depth = -1;
-	if (param->policies)
-		{
-		sk_ASN1_OBJECT_pop_free(param->policies, ASN1_OBJECT_free);
-		param->policies = NULL;
-		}
-	}
-
-X509_VERIFY_PARAM *X509_VERIFY_PARAM_new(void)
-	{
-	X509_VERIFY_PARAM *param;
-	param = OPENSSL_malloc(sizeof(X509_VERIFY_PARAM));
-	memset(param, 0, sizeof(X509_VERIFY_PARAM));
-	x509_verify_param_zero(param);
-	return param;
-	}
-
-void X509_VERIFY_PARAM_free(X509_VERIFY_PARAM *param)
-	{
-	x509_verify_param_zero(param);
-	OPENSSL_free(param);
-	}
-
-/* This function determines how parameters are "inherited" from one structure
- * to another. There are several different ways this can happen.
- *
- * 1. If a child structure needs to have its values initialized from a parent
- *    they are simply copied across. For example SSL_CTX copied to SSL.
- * 2. If the structure should take on values only if they are currently unset.
- *    For example the values in an SSL structure will take appropriate value
- *    for SSL servers or clients but only if the application has not set new
- *    ones.
- *
- * The "inh_flags" field determines how this function behaves. 
- *
- * Normally any values which are set in the default are not copied from the
- * destination and verify flags are ORed together.
- *
- * If X509_VP_FLAG_DEFAULT is set then anything set in the source is copied
- * to the destination. Effectively the values in "to" become default values
- * which will be used only if nothing new is set in "from".
- *
- * If X509_VP_FLAG_OVERWRITE is set then all value are copied across whether
- * they are set or not. Flags is still Ored though.
- *
- * If X509_VP_FLAG_RESET_FLAGS is set then the flags value is copied instead
- * of ORed.
- *
- * If X509_VP_FLAG_LOCKED is set then no values are copied.
- *
- * If X509_VP_FLAG_ONCE is set then the current inh_flags setting is zeroed
- * after the next call.
- */
-
-/* Macro to test if a field should be copied from src to dest */
-
-#define test_x509_verify_param_copy(field, def) \
-	(to_overwrite || \
-		((src->field != def) && (to_default || (dest->field == def))))
-
-/* Macro to test and copy a field if necessary */
-
-#define x509_verify_param_copy(field, def) \
-	if (test_x509_verify_param_copy(field, def)) \
-		dest->field = src->field
-		
-
-int X509_VERIFY_PARAM_inherit(X509_VERIFY_PARAM *dest,
-						const X509_VERIFY_PARAM *src)
-	{
-	unsigned long inh_flags;
-	int to_default, to_overwrite;
-	if (!src)
-		return 1;
-	inh_flags = dest->inh_flags | src->inh_flags;
-
-	if (inh_flags & X509_VP_FLAG_ONCE)
-		dest->inh_flags = 0;
-
-	if (inh_flags & X509_VP_FLAG_LOCKED)
-		return 1;
-
-	if (inh_flags & X509_VP_FLAG_DEFAULT)
-		to_default = 1;
-	else
-		to_default = 0;
-
-	if (inh_flags & X509_VP_FLAG_OVERWRITE)
-		to_overwrite = 1;
-	else
-		to_overwrite = 0;
-
-	x509_verify_param_copy(purpose, 0);
-	x509_verify_param_copy(trust, 0);
-	x509_verify_param_copy(depth, -1);
-
-	/* If overwrite or check time not set, copy across */
-
-	if (to_overwrite || !(dest->flags & X509_V_FLAG_USE_CHECK_TIME))
-		{
-		dest->check_time = src->check_time;
-		dest->flags &= ~X509_V_FLAG_USE_CHECK_TIME;
-		/* Don't need to copy flag: that is done below */
-		}
-
-	if (inh_flags & X509_VP_FLAG_RESET_FLAGS)
-		dest->flags = 0;
-
-	dest->flags |= src->flags;
-
-	if (test_x509_verify_param_copy(policies, NULL))
-		{
-		if (!X509_VERIFY_PARAM_set1_policies(dest, src->policies))
-			return 0;
-		}
-
-	return 1;
-	}
-
-int X509_VERIFY_PARAM_set1(X509_VERIFY_PARAM *to,
-						const X509_VERIFY_PARAM *from)
-	{
-	to->inh_flags |= X509_VP_FLAG_DEFAULT;
-	return X509_VERIFY_PARAM_inherit(to, from);
-	}
-
-int X509_VERIFY_PARAM_set1_name(X509_VERIFY_PARAM *param, const char *name)
-	{
-	if (param->name)
-		OPENSSL_free(param->name);
-	param->name = BUF_strdup(name);
-	if (param->name)
-		return 1;
-	return 0;
-	}
-
-int X509_VERIFY_PARAM_set_flags(X509_VERIFY_PARAM *param, unsigned long flags)
-	{
-	param->flags |= flags;
-	if (flags & X509_V_FLAG_POLICY_MASK)
-		param->flags |= X509_V_FLAG_POLICY_CHECK;
-	return 1;
-	}
-
-int X509_VERIFY_PARAM_clear_flags(X509_VERIFY_PARAM *param, unsigned long flags)
-	{
-	param->flags &= ~flags;
-	return 1;
-	}
-
-unsigned long X509_VERIFY_PARAM_get_flags(X509_VERIFY_PARAM *param)
-	{
-	return param->flags;
-	}
-
-int X509_VERIFY_PARAM_set_purpose(X509_VERIFY_PARAM *param, int purpose)
-	{
-	return X509_PURPOSE_set(&param->purpose, purpose);
-	}
-
-int X509_VERIFY_PARAM_set_trust(X509_VERIFY_PARAM *param, int trust)
-	{
-	return X509_TRUST_set(&param->trust, trust);
-	}
-
-void X509_VERIFY_PARAM_set_depth(X509_VERIFY_PARAM *param, int depth)
-	{
-	param->depth = depth;
-	}
-
-void X509_VERIFY_PARAM_set_time(X509_VERIFY_PARAM *param, time_t t)
-	{
-	param->check_time = t;
-	param->flags |= X509_V_FLAG_USE_CHECK_TIME;
-	}
-
-int X509_VERIFY_PARAM_add0_policy(X509_VERIFY_PARAM *param, ASN1_OBJECT *policy)
-	{
-	if (!param->policies)
-		{
-		param->policies = sk_ASN1_OBJECT_new_null();
-		if (!param->policies)
-			return 0;
-		}
-	if (!sk_ASN1_OBJECT_push(param->policies, policy))
-		return 0;
-	return 1;
-	}
-
-int X509_VERIFY_PARAM_set1_policies(X509_VERIFY_PARAM *param, 
-					STACK_OF(ASN1_OBJECT) *policies)
-	{
-	int i;
-	ASN1_OBJECT *oid, *doid;
-	if (!param)
-		return 0;
-	if (param->policies)
-		sk_ASN1_OBJECT_pop_free(param->policies, ASN1_OBJECT_free);
-
-	if (!policies)
-		{
-		param->policies = NULL;
-		return 1;
-		}
-
-	param->policies = sk_ASN1_OBJECT_new_null();
-	if (!param->policies)
-		return 0;
-
-	for (i = 0; i < sk_ASN1_OBJECT_num(policies); i++)
-		{
-		oid = sk_ASN1_OBJECT_value(policies, i);
-		doid = OBJ_dup(oid);
-		if (!doid)
-			return 0;
-		if (!sk_ASN1_OBJECT_push(param->policies, doid))
-			{
-			ASN1_OBJECT_free(doid);
-			return 0;
-			}
-		}
-	param->flags |= X509_V_FLAG_POLICY_CHECK;
-	return 1;
-	}
-
-int X509_VERIFY_PARAM_get_depth(const X509_VERIFY_PARAM *param)
-	{
-	return param->depth;
-	}
-
-/* Default verify parameters: these are used for various
- * applications and can be overridden by the user specified table.
- * NB: the 'name' field *must* be in alphabetical order because it
- * will be searched using OBJ_search.
- */
-
-static const X509_VERIFY_PARAM default_table[] = {
-	{
-	"default",	/* X509 default parameters */
-	0,		/* Check time */
-	0,		/* internal flags */
-	0,		/* flags */
-	0,		/* purpose */
-	0,		/* trust */
-	9,		/* depth */
-	NULL		/* policies */
-	},
-	{
-	"pkcs7",			/* SSL/TLS client parameters */
-	0,				/* Check time */
-	0,				/* internal flags */
-	0,				/* flags */
-	X509_PURPOSE_SMIME_SIGN,	/* purpose */
-	X509_TRUST_EMAIL,		/* trust */
-	-1,				/* depth */
-	NULL				/* policies */
-	},
-	{
-	"ssl_client",			/* SSL/TLS client parameters */
-	0,				/* Check time */
-	0,				/* internal flags */
-	0,				/* flags */
-	X509_PURPOSE_SSL_CLIENT,	/* purpose */
-	X509_TRUST_SSL_CLIENT,		/* trust */
-	-1,				/* depth */
-	NULL				/* policies */
-	},
-	{
-	"ssl_server",			/* SSL/TLS server parameters */
-	0,				/* Check time */
-	0,				/* internal flags */
-	0,				/* flags */
-	X509_PURPOSE_SSL_SERVER,	/* purpose */
-	X509_TRUST_SSL_SERVER,		/* trust */
-	-1,				/* depth */
-	NULL				/* policies */
-	}};
-
-static STACK_OF(X509_VERIFY_PARAM) *param_table = NULL;
-
-static int table_cmp(const void *pa, const void *pb)
-	{
-	const X509_VERIFY_PARAM *a = pa, *b = pb;
-	return strcmp(a->name, b->name);
-	}
-
-static int param_cmp(const X509_VERIFY_PARAM * const *a,
-			const X509_VERIFY_PARAM * const *b)
-	{
-	return strcmp((*a)->name, (*b)->name);
-	}
-
-int X509_VERIFY_PARAM_add0_table(X509_VERIFY_PARAM *param)
-	{
-	int idx;
-	X509_VERIFY_PARAM *ptmp;
-	if (!param_table)
-		{
-		param_table = sk_X509_VERIFY_PARAM_new(param_cmp);
-		if (!param_table)
-			return 0;
-		}
-	else
-		{
-		idx = sk_X509_VERIFY_PARAM_find(param_table, param);
-		if (idx != -1)
-			{
-			ptmp = sk_X509_VERIFY_PARAM_value(param_table, idx);
-			X509_VERIFY_PARAM_free(ptmp);
-			sk_X509_VERIFY_PARAM_delete(param_table, idx);
-			}
-		}
-	if (!sk_X509_VERIFY_PARAM_push(param_table, param))
-		return 0;
-	return 1;
-	}
-
-const X509_VERIFY_PARAM *X509_VERIFY_PARAM_lookup(const char *name)
-	{
-	int idx;
-	X509_VERIFY_PARAM pm;
-	pm.name = (char *)name;
-	if (param_table)
-		{
-		idx = sk_X509_VERIFY_PARAM_find(param_table, &pm);
-		if (idx != -1)
-			return sk_X509_VERIFY_PARAM_value(param_table, idx);
-		}
-	return (const X509_VERIFY_PARAM *) OBJ_bsearch((char *)&pm,
-				(char *)&default_table,
-				sizeof(default_table)/sizeof(X509_VERIFY_PARAM),
-				sizeof(X509_VERIFY_PARAM),
-				table_cmp);
-	}
-
-void X509_VERIFY_PARAM_table_cleanup(void)
-	{
-	if (param_table)
-		sk_X509_VERIFY_PARAM_pop_free(param_table,
-						X509_VERIFY_PARAM_free);
-	param_table = NULL;
-	}
diff --git a/crypto/openssl/crypto/x509/x509cset.c b/crypto/openssl/crypto/x509/x509cset.c
deleted file mode 100644
index 9d1646d5c8d7..000000000000
--- a/crypto/openssl/crypto/x509/x509cset.c
+++ /dev/null
@@ -1,170 +0,0 @@
-/* crypto/x509/x509cset.c */
-/* Written by Dr Stephen N Henson (shenson@bigfoot.com) for the OpenSSL
- * project 2001.
- */
-/* ====================================================================
- * Copyright (c) 2001 The OpenSSL Project.  All rights reserved.
- *
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions
- * are met:
- *
- * 1. Redistributions of source code must retain the above copyright
- *    notice, this list of conditions and the following disclaimer. 
- *
- * 2. Redistributions in binary form must reproduce the above copyright
- *    notice, this list of conditions and the following disclaimer in
- *    the documentation and/or other materials provided with the
- *    distribution.
- *
- * 3. All advertising materials mentioning features or use of this
- *    software must display the following acknowledgment:
- *    "This product includes software developed by the OpenSSL Project
- *    for use in the OpenSSL Toolkit. (http://www.OpenSSL.org/)"
- *
- * 4. The names "OpenSSL Toolkit" and "OpenSSL Project" must not be used to
- *    endorse or promote products derived from this software without
- *    prior written permission. For written permission, please contact
- *    licensing@OpenSSL.org.
- *
- * 5. Products derived from this software may not be called "OpenSSL"
- *    nor may "OpenSSL" appear in their names without prior written
- *    permission of the OpenSSL Project.
- *
- * 6. Redistributions of any form whatsoever must retain the following
- *    acknowledgment:
- *    "This product includes software developed by the OpenSSL Project
- *    for use in the OpenSSL Toolkit (http://www.OpenSSL.org/)"
- *
- * THIS SOFTWARE IS PROVIDED BY THE OpenSSL PROJECT ``AS IS'' AND ANY
- * EXPRESSED OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
- * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR
- * PURPOSE ARE DISCLAIMED.  IN NO EVENT SHALL THE OpenSSL PROJECT OR
- * ITS CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
- * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
- * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
- * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
- * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
- * STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
- * ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED
- * OF THE POSSIBILITY OF SUCH DAMAGE.
- * ====================================================================
- *
- * This product includes cryptographic software written by Eric Young
- * (eay@cryptsoft.com).  This product includes software written by Tim
- * Hudson (tjh@cryptsoft.com).
- *
- */
-
-#include <stdio.h>
-#include "cryptlib.h"
-#include <openssl/asn1.h>
-#include <openssl/objects.h>
-#include <openssl/evp.h>
-#include <openssl/x509.h>
-
-int X509_CRL_set_version(X509_CRL *x, long version)
-	{
-	if (x == NULL) return(0);
-	if (x->crl->version == NULL)
-		{
-		if ((x->crl->version=M_ASN1_INTEGER_new()) == NULL)
-			return(0);
-		}
-	return(ASN1_INTEGER_set(x->crl->version,version));
-	}
-
-int X509_CRL_set_issuer_name(X509_CRL *x, X509_NAME *name)
-	{
-	if ((x == NULL) || (x->crl == NULL)) return(0);
-	return(X509_NAME_set(&x->crl->issuer,name));
-	}
-
-
-int X509_CRL_set_lastUpdate(X509_CRL *x, ASN1_TIME *tm)
-	{
-	ASN1_TIME *in;
-
-	if (x == NULL) return(0);
-	in=x->crl->lastUpdate;
-	if (in != tm)
-		{
-		in=M_ASN1_TIME_dup(tm);
-		if (in != NULL)
-			{
-			M_ASN1_TIME_free(x->crl->lastUpdate);
-			x->crl->lastUpdate=in;
-			}
-		}
-	return(in != NULL);
-	}
-
-int X509_CRL_set_nextUpdate(X509_CRL *x, ASN1_TIME *tm)
-	{
-	ASN1_TIME *in;
-
-	if (x == NULL) return(0);
-	in=x->crl->nextUpdate;
-	if (in != tm)
-		{
-		in=M_ASN1_TIME_dup(tm);
-		if (in != NULL)
-			{
-			M_ASN1_TIME_free(x->crl->nextUpdate);
-			x->crl->nextUpdate=in;
-			}
-		}
-	return(in != NULL);
-	}
-
-int X509_CRL_sort(X509_CRL *c)
-	{
-	int i;
-	X509_REVOKED *r;
-	/* sort the data so it will be written in serial
-	 * number order */
-	sk_X509_REVOKED_sort(c->crl->revoked);
-	for (i=0; i<sk_X509_REVOKED_num(c->crl->revoked); i++)
-		{
-		r=sk_X509_REVOKED_value(c->crl->revoked,i);
-		r->sequence=i;
-		}
-	c->crl->enc.modified = 1;
-	return 1;
-	}
-
-int X509_REVOKED_set_revocationDate(X509_REVOKED *x, ASN1_TIME *tm)
-	{
-	ASN1_TIME *in;
-
-	if (x == NULL) return(0);
-	in=x->revocationDate;
-	if (in != tm)
-		{
-		in=M_ASN1_TIME_dup(tm);
-		if (in != NULL)
-			{
-			M_ASN1_TIME_free(x->revocationDate);
-			x->revocationDate=in;
-			}
-		}
-	return(in != NULL);
-	}
-
-int X509_REVOKED_set_serialNumber(X509_REVOKED *x, ASN1_INTEGER *serial)
-	{
-	ASN1_INTEGER *in;
-
-	if (x == NULL) return(0);
-	in=x->serialNumber;
-	if (in != serial)
-		{
-		in=M_ASN1_INTEGER_dup(serial);
-		if (in != NULL)
-			{
-			M_ASN1_INTEGER_free(x->serialNumber);
-			x->serialNumber=in;
-			}
-		}
-	return(in != NULL);
-	}
diff --git a/crypto/openssl/crypto/x509/x509name.c b/crypto/openssl/crypto/x509/x509name.c
deleted file mode 100644
index 068abfe5f045..000000000000
--- a/crypto/openssl/crypto/x509/x509name.c
+++ /dev/null
@@ -1,383 +0,0 @@
-/* crypto/x509/x509name.c */
-/* Copyright (C) 1995-1998 Eric Young (eay@cryptsoft.com)
- * All rights reserved.
- *
- * This package is an SSL implementation written
- * by Eric Young (eay@cryptsoft.com).
- * The implementation was written so as to conform with Netscapes SSL.
- * 
- * This library is free for commercial and non-commercial use as long as
- * the following conditions are aheared to.  The following conditions
- * apply to all code found in this distribution, be it the RC4, RSA,
- * lhash, DES, etc., code; not just the SSL code.  The SSL documentation
- * included with this distribution is covered by the same copyright terms
- * except that the holder is Tim Hudson (tjh@cryptsoft.com).
- * 
- * Copyright remains Eric Young's, and as such any Copyright notices in
- * the code are not to be removed.
- * If this package is used in a product, Eric Young should be given attribution
- * as the author of the parts of the library used.
- * This can be in the form of a textual message at program startup or
- * in documentation (online or textual) provided with the package.
- * 
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions
- * are met:
- * 1. Redistributions of source code must retain the copyright
- *    notice, this list of conditions and the following disclaimer.
- * 2. Redistributions in binary form must reproduce the above copyright
- *    notice, this list of conditions and the following disclaimer in the
- *    documentation and/or other materials provided with the distribution.
- * 3. All advertising materials mentioning features or use of this software
- *    must display the following acknowledgement:
- *    "This product includes cryptographic software written by
- *     Eric Young (eay@cryptsoft.com)"
- *    The word 'cryptographic' can be left out if the rouines from the library
- *    being used are not cryptographic related :-).
- * 4. If you include any Windows specific code (or a derivative thereof) from 
- *    the apps directory (application code) you must include an acknowledgement:
- *    "This product includes software written by Tim Hudson (tjh@cryptsoft.com)"
- * 
- * THIS SOFTWARE IS PROVIDED BY ERIC YOUNG ``AS IS'' AND
- * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
- * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
- * ARE DISCLAIMED.  IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE
- * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
- * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
- * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
- * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
- * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
- * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
- * SUCH DAMAGE.
- * 
- * The licence and distribution terms for any publically available version or
- * derivative of this code cannot be changed.  i.e. this code cannot simply be
- * copied and put under another distribution licence
- * [including the GNU Public Licence.]
- */
-
-#include <stdio.h>
-#include <openssl/stack.h>
-#include "cryptlib.h"
-#include <openssl/asn1.h>
-#include <openssl/objects.h>
-#include <openssl/evp.h>
-#include <openssl/x509.h>
-
-int X509_NAME_get_text_by_NID(X509_NAME *name, int nid, char *buf, int len)
-	{
-	ASN1_OBJECT *obj;
-
-	obj=OBJ_nid2obj(nid);
-	if (obj == NULL) return(-1);
-	return(X509_NAME_get_text_by_OBJ(name,obj,buf,len));
-	}
-
-int X509_NAME_get_text_by_OBJ(X509_NAME *name, ASN1_OBJECT *obj, char *buf,
-	     int len)
-	{
-	int i;
-	ASN1_STRING *data;
-
-	i=X509_NAME_get_index_by_OBJ(name,obj,-1);
-	if (i < 0) return(-1);
-	data=X509_NAME_ENTRY_get_data(X509_NAME_get_entry(name,i));
-	i=(data->length > (len-1))?(len-1):data->length;
-	if (buf == NULL) return(data->length);
-	memcpy(buf,data->data,i);
-	buf[i]='\0';
-	return(i);
-	}
-
-int X509_NAME_entry_count(X509_NAME *name)
-	{
-	if (name == NULL) return(0);
-	return(sk_X509_NAME_ENTRY_num(name->entries));
-	}
-
-int X509_NAME_get_index_by_NID(X509_NAME *name, int nid, int lastpos)
-	{
-	ASN1_OBJECT *obj;
-
-	obj=OBJ_nid2obj(nid);
-	if (obj == NULL) return(-2);
-	return(X509_NAME_get_index_by_OBJ(name,obj,lastpos));
-	}
-
-/* NOTE: you should be passsing -1, not 0 as lastpos */
-int X509_NAME_get_index_by_OBJ(X509_NAME *name, ASN1_OBJECT *obj,
-	     int lastpos)
-	{
-	int n;
-	X509_NAME_ENTRY *ne;
-	STACK_OF(X509_NAME_ENTRY) *sk;
-
-	if (name == NULL) return(-1);
-	if (lastpos < 0)
-		lastpos= -1;
-	sk=name->entries;
-	n=sk_X509_NAME_ENTRY_num(sk);
-	for (lastpos++; lastpos < n; lastpos++)
-		{
-		ne=sk_X509_NAME_ENTRY_value(sk,lastpos);
-		if (OBJ_cmp(ne->object,obj) == 0)
-			return(lastpos);
-		}
-	return(-1);
-	}
-
-X509_NAME_ENTRY *X509_NAME_get_entry(X509_NAME *name, int loc)
-	{
-	if(name == NULL || sk_X509_NAME_ENTRY_num(name->entries) <= loc
-	   || loc < 0)
-		return(NULL);
-	else
-		return(sk_X509_NAME_ENTRY_value(name->entries,loc));
-	}
-
-X509_NAME_ENTRY *X509_NAME_delete_entry(X509_NAME *name, int loc)
-	{
-	X509_NAME_ENTRY *ret;
-	int i,n,set_prev,set_next;
-	STACK_OF(X509_NAME_ENTRY) *sk;
-
-	if (name == NULL || sk_X509_NAME_ENTRY_num(name->entries) <= loc
-	    || loc < 0)
-		return(NULL);
-	sk=name->entries;
-	ret=sk_X509_NAME_ENTRY_delete(sk,loc);
-	n=sk_X509_NAME_ENTRY_num(sk);
-	name->modified=1;
-	if (loc == n) return(ret);
-
-	/* else we need to fixup the set field */
-	if (loc != 0)
-		set_prev=(sk_X509_NAME_ENTRY_value(sk,loc-1))->set;
-	else
-		set_prev=ret->set-1;
-	set_next=sk_X509_NAME_ENTRY_value(sk,loc)->set;
-
-	/* set_prev is the previous set
-	 * set is the current set
-	 * set_next is the following
-	 * prev  1 1	1 1	1 1	1 1
-	 * set   1	1	2	2
-	 * next  1 1	2 2	2 2	3 2
-	 * so basically only if prev and next differ by 2, then
-	 * re-number down by 1 */
-	if (set_prev+1 < set_next)
-		for (i=loc; i<n; i++)
-			sk_X509_NAME_ENTRY_value(sk,i)->set--;
-	return(ret);
-	}
-
-int X509_NAME_add_entry_by_OBJ(X509_NAME *name, ASN1_OBJECT *obj, int type,
-			unsigned char *bytes, int len, int loc, int set)
-{
-	X509_NAME_ENTRY *ne;
-	int ret;
-	ne = X509_NAME_ENTRY_create_by_OBJ(NULL, obj, type, bytes, len);
-	if(!ne) return 0;
-	ret = X509_NAME_add_entry(name, ne, loc, set);
-	X509_NAME_ENTRY_free(ne);
-	return ret;
-}
-
-int X509_NAME_add_entry_by_NID(X509_NAME *name, int nid, int type,
-			unsigned char *bytes, int len, int loc, int set)
-{
-	X509_NAME_ENTRY *ne;
-	int ret;
-	ne = X509_NAME_ENTRY_create_by_NID(NULL, nid, type, bytes, len);
-	if(!ne) return 0;
-	ret = X509_NAME_add_entry(name, ne, loc, set);
-	X509_NAME_ENTRY_free(ne);
-	return ret;
-}
-
-int X509_NAME_add_entry_by_txt(X509_NAME *name, const char *field, int type,
-			const unsigned char *bytes, int len, int loc, int set)
-{
-	X509_NAME_ENTRY *ne;
-	int ret;
-	ne = X509_NAME_ENTRY_create_by_txt(NULL, field, type, bytes, len);
-	if(!ne) return 0;
-	ret = X509_NAME_add_entry(name, ne, loc, set);
-	X509_NAME_ENTRY_free(ne);
-	return ret;
-}
-
-/* if set is -1, append to previous set, 0 'a new one', and 1,
- * prepend to the guy we are about to stomp on. */
-int X509_NAME_add_entry(X509_NAME *name, X509_NAME_ENTRY *ne, int loc,
-	     int set)
-	{
-	X509_NAME_ENTRY *new_name=NULL;
-	int n,i,inc;
-	STACK_OF(X509_NAME_ENTRY) *sk;
-
-	if (name == NULL) return(0);
-	sk=name->entries;
-	n=sk_X509_NAME_ENTRY_num(sk);
-	if (loc > n) loc=n;
-	else if (loc < 0) loc=n;
-
-	name->modified=1;
-
-	if (set == -1)
-		{
-		if (loc == 0)
-			{
-			set=0;
-			inc=1;
-			}
-		else
-			{
-			set=sk_X509_NAME_ENTRY_value(sk,loc-1)->set;
-			inc=0;
-			}
-		}
-	else /* if (set >= 0) */
-		{
-		if (loc >= n)
-			{
-			if (loc != 0)
-				set=sk_X509_NAME_ENTRY_value(sk,loc-1)->set+1;
-			else
-				set=0;
-			}
-		else
-			set=sk_X509_NAME_ENTRY_value(sk,loc)->set;
-		inc=(set == 0)?1:0;
-		}
-
-	if ((new_name=X509_NAME_ENTRY_dup(ne)) == NULL)
-		goto err;
-	new_name->set=set;
-	if (!sk_X509_NAME_ENTRY_insert(sk,new_name,loc))
-		{
-		X509err(X509_F_X509_NAME_ADD_ENTRY,ERR_R_MALLOC_FAILURE);
-		goto err;
-		}
-	if (inc)
-		{
-		n=sk_X509_NAME_ENTRY_num(sk);
-		for (i=loc+1; i<n; i++)
-			sk_X509_NAME_ENTRY_value(sk,i-1)->set+=1;
-		}	
-	return(1);
-err:
-	if (new_name != NULL)
-		X509_NAME_ENTRY_free(new_name);
-	return(0);
-	}
-
-X509_NAME_ENTRY *X509_NAME_ENTRY_create_by_txt(X509_NAME_ENTRY **ne,
-		const char *field, int type, const unsigned char *bytes, int len)
-	{
-	ASN1_OBJECT *obj;
-	X509_NAME_ENTRY *nentry;
-
-	obj=OBJ_txt2obj(field, 0);
-	if (obj == NULL)
-		{
-		X509err(X509_F_X509_NAME_ENTRY_CREATE_BY_TXT,
-						X509_R_INVALID_FIELD_NAME);
-		ERR_add_error_data(2, "name=", field);
-		return(NULL);
-		}
-	nentry = X509_NAME_ENTRY_create_by_OBJ(ne,obj,type,bytes,len);
-	ASN1_OBJECT_free(obj);
-	return nentry;
-	}
-
-X509_NAME_ENTRY *X509_NAME_ENTRY_create_by_NID(X509_NAME_ENTRY **ne, int nid,
-	     int type, unsigned char *bytes, int len)
-	{
-	ASN1_OBJECT *obj;
-	X509_NAME_ENTRY *nentry;
-
-	obj=OBJ_nid2obj(nid);
-	if (obj == NULL)
-		{
-		X509err(X509_F_X509_NAME_ENTRY_CREATE_BY_NID,X509_R_UNKNOWN_NID);
-		return(NULL);
-		}
-	nentry = X509_NAME_ENTRY_create_by_OBJ(ne,obj,type,bytes,len);
-	ASN1_OBJECT_free(obj);
-	return nentry;
-	}
-
-X509_NAME_ENTRY *X509_NAME_ENTRY_create_by_OBJ(X509_NAME_ENTRY **ne,
-	     ASN1_OBJECT *obj, int type, const unsigned char *bytes, int len)
-	{
-	X509_NAME_ENTRY *ret;
-
-	if ((ne == NULL) || (*ne == NULL))
-		{
-		if ((ret=X509_NAME_ENTRY_new()) == NULL)
-			return(NULL);
-		}
-	else
-		ret= *ne;
-
-	if (!X509_NAME_ENTRY_set_object(ret,obj))
-		goto err;
-	if (!X509_NAME_ENTRY_set_data(ret,type,bytes,len))
-		goto err;
-
-	if ((ne != NULL) && (*ne == NULL)) *ne=ret;
-	return(ret);
-err:
-	if ((ne == NULL) || (ret != *ne))
-		X509_NAME_ENTRY_free(ret);
-	return(NULL);
-	}
-
-int X509_NAME_ENTRY_set_object(X509_NAME_ENTRY *ne, ASN1_OBJECT *obj)
-	{
-	if ((ne == NULL) || (obj == NULL))
-		{
-		X509err(X509_F_X509_NAME_ENTRY_SET_OBJECT,ERR_R_PASSED_NULL_PARAMETER);
-		return(0);
-		}
-	ASN1_OBJECT_free(ne->object);
-	ne->object=OBJ_dup(obj);
-	return((ne->object == NULL)?0:1);
-	}
-
-int X509_NAME_ENTRY_set_data(X509_NAME_ENTRY *ne, int type,
-	     const unsigned char *bytes, int len)
-	{
-	int i;
-
-	if ((ne == NULL) || ((bytes == NULL) && (len != 0))) return(0);
-	if((type > 0) && (type & MBSTRING_FLAG)) 
-		return ASN1_STRING_set_by_NID(&ne->value, bytes,
-						len, type,
-					OBJ_obj2nid(ne->object)) ? 1 : 0;
-	if (len < 0) len=strlen((char *)bytes);
-	i=ASN1_STRING_set(ne->value,bytes,len);
-	if (!i) return(0);
-	if (type != V_ASN1_UNDEF)
-		{
-		if (type == V_ASN1_APP_CHOOSE)
-			ne->value->type=ASN1_PRINTABLE_type(bytes,len);
-		else
-			ne->value->type=type;
-		}
-	return(1);
-	}
-
-ASN1_OBJECT *X509_NAME_ENTRY_get_object(X509_NAME_ENTRY *ne)
-	{
-	if (ne == NULL) return(NULL);
-	return(ne->object);
-	}
-
-ASN1_STRING *X509_NAME_ENTRY_get_data(X509_NAME_ENTRY *ne)
-	{
-	if (ne == NULL) return(NULL);
-	return(ne->value);
-	}
-
diff --git a/crypto/openssl/crypto/x509/x509rset.c b/crypto/openssl/crypto/x509/x509rset.c
deleted file mode 100644
index d9f6b573729e..000000000000
--- a/crypto/openssl/crypto/x509/x509rset.c
+++ /dev/null
@@ -1,83 +0,0 @@
-/* crypto/x509/x509rset.c */
-/* Copyright (C) 1995-1998 Eric Young (eay@cryptsoft.com)
- * All rights reserved.
- *
- * This package is an SSL implementation written
- * by Eric Young (eay@cryptsoft.com).
- * The implementation was written so as to conform with Netscapes SSL.
- * 
- * This library is free for commercial and non-commercial use as long as
- * the following conditions are aheared to.  The following conditions
- * apply to all code found in this distribution, be it the RC4, RSA,
- * lhash, DES, etc., code; not just the SSL code.  The SSL documentation
- * included with this distribution is covered by the same copyright terms
- * except that the holder is Tim Hudson (tjh@cryptsoft.com).
- * 
- * Copyright remains Eric Young's, and as such any Copyright notices in
- * the code are not to be removed.
- * If this package is used in a product, Eric Young should be given attribution
- * as the author of the parts of the library used.
- * This can be in the form of a textual message at program startup or
- * in documentation (online or textual) provided with the package.
- * 
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions
- * are met:
- * 1. Redistributions of source code must retain the copyright
- *    notice, this list of conditions and the following disclaimer.
- * 2. Redistributions in binary form must reproduce the above copyright
- *    notice, this list of conditions and the following disclaimer in the
- *    documentation and/or other materials provided with the distribution.
- * 3. All advertising materials mentioning features or use of this software
- *    must display the following acknowledgement:
- *    "This product includes cryptographic software written by
- *     Eric Young (eay@cryptsoft.com)"
- *    The word 'cryptographic' can be left out if the rouines from the library
- *    being used are not cryptographic related :-).
- * 4. If you include any Windows specific code (or a derivative thereof) from 
- *    the apps directory (application code) you must include an acknowledgement:
- *    "This product includes software written by Tim Hudson (tjh@cryptsoft.com)"
- * 
- * THIS SOFTWARE IS PROVIDED BY ERIC YOUNG ``AS IS'' AND
- * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
- * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
- * ARE DISCLAIMED.  IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE
- * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
- * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
- * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
- * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
- * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
- * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
- * SUCH DAMAGE.
- * 
- * The licence and distribution terms for any publically available version or
- * derivative of this code cannot be changed.  i.e. this code cannot simply be
- * copied and put under another distribution licence
- * [including the GNU Public Licence.]
- */
-
-#include <stdio.h>
-#include "cryptlib.h"
-#include <openssl/asn1.h>
-#include <openssl/objects.h>
-#include <openssl/evp.h>
-#include <openssl/x509.h>
-
-int X509_REQ_set_version(X509_REQ *x, long version)
-	{
-	if (x == NULL) return(0);
-	return(ASN1_INTEGER_set(x->req_info->version,version));
-	}
-
-int X509_REQ_set_subject_name(X509_REQ *x, X509_NAME *name)
-	{
-	if ((x == NULL) || (x->req_info == NULL)) return(0);
-	return(X509_NAME_set(&x->req_info->subject,name));
-	}
-
-int X509_REQ_set_pubkey(X509_REQ *x, EVP_PKEY *pkey)
-	{
-	if ((x == NULL) || (x->req_info == NULL)) return(0);
-	return(X509_PUBKEY_set(&x->req_info->pubkey,pkey));
-	}
-
diff --git a/crypto/openssl/crypto/x509/x509spki.c b/crypto/openssl/crypto/x509/x509spki.c
deleted file mode 100644
index ed868b838e31..000000000000
--- a/crypto/openssl/crypto/x509/x509spki.c
+++ /dev/null
@@ -1,121 +0,0 @@
-/* x509spki.c */
-/* Written by Dr Stephen N Henson (shenson@bigfoot.com) for the OpenSSL
- * project 1999.
- */
-/* ====================================================================
- * Copyright (c) 1999 The OpenSSL Project.  All rights reserved.
- *
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions
- * are met:
- *
- * 1. Redistributions of source code must retain the above copyright
- *    notice, this list of conditions and the following disclaimer. 
- *
- * 2. Redistributions in binary form must reproduce the above copyright
- *    notice, this list of conditions and the following disclaimer in
- *    the documentation and/or other materials provided with the
- *    distribution.
- *
- * 3. All advertising materials mentioning features or use of this
- *    software must display the following acknowledgment:
- *    "This product includes software developed by the OpenSSL Project
- *    for use in the OpenSSL Toolkit. (http://www.OpenSSL.org/)"
- *
- * 4. The names "OpenSSL Toolkit" and "OpenSSL Project" must not be used to
- *    endorse or promote products derived from this software without
- *    prior written permission. For written permission, please contact
- *    licensing@OpenSSL.org.
- *
- * 5. Products derived from this software may not be called "OpenSSL"
- *    nor may "OpenSSL" appear in their names without prior written
- *    permission of the OpenSSL Project.
- *
- * 6. Redistributions of any form whatsoever must retain the following
- *    acknowledgment:
- *    "This product includes software developed by the OpenSSL Project
- *    for use in the OpenSSL Toolkit (http://www.OpenSSL.org/)"
- *
- * THIS SOFTWARE IS PROVIDED BY THE OpenSSL PROJECT ``AS IS'' AND ANY
- * EXPRESSED OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
- * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR
- * PURPOSE ARE DISCLAIMED.  IN NO EVENT SHALL THE OpenSSL PROJECT OR
- * ITS CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
- * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
- * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
- * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
- * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
- * STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
- * ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED
- * OF THE POSSIBILITY OF SUCH DAMAGE.
- * ====================================================================
- *
- * This product includes cryptographic software written by Eric Young
- * (eay@cryptsoft.com).  This product includes software written by Tim
- * Hudson (tjh@cryptsoft.com).
- *
- */
-
-#include <stdio.h>
-#include "cryptlib.h"
-#include <openssl/x509.h>
-
-int NETSCAPE_SPKI_set_pubkey(NETSCAPE_SPKI *x, EVP_PKEY *pkey)
-{
-	if ((x == NULL) || (x->spkac == NULL)) return(0);
-	return(X509_PUBKEY_set(&(x->spkac->pubkey),pkey));
-}
-
-EVP_PKEY *NETSCAPE_SPKI_get_pubkey(NETSCAPE_SPKI *x)
-{
-	if ((x == NULL) || (x->spkac == NULL))
-		return(NULL);
-	return(X509_PUBKEY_get(x->spkac->pubkey));
-}
-
-/* Load a Netscape SPKI from a base64 encoded string */
-
-NETSCAPE_SPKI * NETSCAPE_SPKI_b64_decode(const char *str, int len)
-{
-	unsigned char *spki_der;
-	const unsigned char *p;
-	int spki_len;
-	NETSCAPE_SPKI *spki;
-	if(len <= 0) len = strlen(str);
-	if (!(spki_der = OPENSSL_malloc(len + 1))) {
-		X509err(X509_F_NETSCAPE_SPKI_B64_DECODE, ERR_R_MALLOC_FAILURE);
-		return NULL;
-	}
-	spki_len = EVP_DecodeBlock(spki_der, (const unsigned char *)str, len);
-	if(spki_len < 0) {
-		X509err(X509_F_NETSCAPE_SPKI_B64_DECODE,
-						X509_R_BASE64_DECODE_ERROR);
-		OPENSSL_free(spki_der);
-		return NULL;
-	}
-	p = spki_der;
-	spki = d2i_NETSCAPE_SPKI(NULL, &p, spki_len);
-	OPENSSL_free(spki_der);
-	return spki;
-}
-
-/* Generate a base64 encoded string from an SPKI */
-
-char * NETSCAPE_SPKI_b64_encode(NETSCAPE_SPKI *spki)
-{
-	unsigned char *der_spki, *p;
-	char *b64_str;
-	int der_len;
-	der_len = i2d_NETSCAPE_SPKI(spki, NULL);
-	der_spki = OPENSSL_malloc(der_len);
-	b64_str = OPENSSL_malloc(der_len * 2);
-	if(!der_spki || !b64_str) {
-		X509err(X509_F_NETSCAPE_SPKI_B64_ENCODE, ERR_R_MALLOC_FAILURE);
-		return NULL;
-	}
-	p = der_spki;
-	i2d_NETSCAPE_SPKI(spki, &p);
-	EVP_EncodeBlock((unsigned char *)b64_str, der_spki, der_len);
-	OPENSSL_free(der_spki);
-	return b64_str;
-}
diff --git a/crypto/openssl/crypto/x509/x509type.c b/crypto/openssl/crypto/x509/x509type.c
deleted file mode 100644
index 2cd994c5b0f5..000000000000
--- a/crypto/openssl/crypto/x509/x509type.c
+++ /dev/null
@@ -1,121 +0,0 @@
-/* crypto/x509/x509type.c */
-/* Copyright (C) 1995-1998 Eric Young (eay@cryptsoft.com)
- * All rights reserved.
- *
- * This package is an SSL implementation written
- * by Eric Young (eay@cryptsoft.com).
- * The implementation was written so as to conform with Netscapes SSL.
- * 
- * This library is free for commercial and non-commercial use as long as
- * the following conditions are aheared to.  The following conditions
- * apply to all code found in this distribution, be it the RC4, RSA,
- * lhash, DES, etc., code; not just the SSL code.  The SSL documentation
- * included with this distribution is covered by the same copyright terms
- * except that the holder is Tim Hudson (tjh@cryptsoft.com).
- * 
- * Copyright remains Eric Young's, and as such any Copyright notices in
- * the code are not to be removed.
- * If this package is used in a product, Eric Young should be given attribution
- * as the author of the parts of the library used.
- * This can be in the form of a textual message at program startup or
- * in documentation (online or textual) provided with the package.
- * 
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions
- * are met:
- * 1. Redistributions of source code must retain the copyright
- *    notice, this list of conditions and the following disclaimer.
- * 2. Redistributions in binary form must reproduce the above copyright
- *    notice, this list of conditions and the following disclaimer in the
- *    documentation and/or other materials provided with the distribution.
- * 3. All advertising materials mentioning features or use of this software
- *    must display the following acknowledgement:
- *    "This product includes cryptographic software written by
- *     Eric Young (eay@cryptsoft.com)"
- *    The word 'cryptographic' can be left out if the rouines from the library
- *    being used are not cryptographic related :-).
- * 4. If you include any Windows specific code (or a derivative thereof) from 
- *    the apps directory (application code) you must include an acknowledgement:
- *    "This product includes software written by Tim Hudson (tjh@cryptsoft.com)"
- * 
- * THIS SOFTWARE IS PROVIDED BY ERIC YOUNG ``AS IS'' AND
- * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
- * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
- * ARE DISCLAIMED.  IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE
- * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
- * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
- * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
- * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
- * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
- * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
- * SUCH DAMAGE.
- * 
- * The licence and distribution terms for any publically available version or
- * derivative of this code cannot be changed.  i.e. this code cannot simply be
- * copied and put under another distribution licence
- * [including the GNU Public Licence.]
- */
-
-#include <stdio.h>
-#include "cryptlib.h"
-#include <openssl/evp.h>
-#include <openssl/objects.h>
-#include <openssl/x509.h>
-
-int X509_certificate_type(X509 *x, EVP_PKEY *pkey)
-	{
-	EVP_PKEY *pk;
-	int ret=0,i;
-
-	if (x == NULL) return(0);
-
-	if (pkey == NULL)
-		pk=X509_get_pubkey(x);
-	else
-		pk=pkey;
-
-	if (pk == NULL) return(0);
-
-	switch (pk->type)
-		{
-	case EVP_PKEY_RSA:
-		ret=EVP_PK_RSA|EVP_PKT_SIGN;
-/*		if (!sign only extension) */
-			ret|=EVP_PKT_ENC;
-	break;
-	case EVP_PKEY_DSA:
-		ret=EVP_PK_DSA|EVP_PKT_SIGN;
-		break;
-	case EVP_PKEY_EC:
-		ret=EVP_PK_EC|EVP_PKT_SIGN|EVP_PKT_EXCH;
-		break;
-	case EVP_PKEY_DH:
-		ret=EVP_PK_DH|EVP_PKT_EXCH;
-		break;
-	default:
-		break;
-		}
-
-	i=X509_get_signature_type(x);
-	switch (i)
-		{
-	case EVP_PKEY_RSA:
-		ret|=EVP_PKS_RSA;
-		break;
-	case EVP_PKEY_DSA:
-		ret|=EVP_PKS_DSA;
-		break;
-	case EVP_PKEY_EC:
-		ret|=EVP_PKS_EC;
-		break;
-	default:
-		break;
-		}
-
-	if (EVP_PKEY_size(pk) <= 1024/8)/* /8 because it's 1024 bits we look
-					   for, not bytes */
-		ret|=EVP_PKT_EXP;
-	if(pkey==NULL) EVP_PKEY_free(pk);
-	return(ret);
-	}
-
diff --git a/crypto/openssl/crypto/x509/x_all.c b/crypto/openssl/crypto/x509/x_all.c
deleted file mode 100644
index 9039caad60de..000000000000
--- a/crypto/openssl/crypto/x509/x_all.c
+++ /dev/null
@@ -1,522 +0,0 @@
-/* crypto/x509/x_all.c */
-/* Copyright (C) 1995-1998 Eric Young (eay@cryptsoft.com)
- * All rights reserved.
- *
- * This package is an SSL implementation written
- * by Eric Young (eay@cryptsoft.com).
- * The implementation was written so as to conform with Netscapes SSL.
- * 
- * This library is free for commercial and non-commercial use as long as
- * the following conditions are aheared to.  The following conditions
- * apply to all code found in this distribution, be it the RC4, RSA,
- * lhash, DES, etc., code; not just the SSL code.  The SSL documentation
- * included with this distribution is covered by the same copyright terms
- * except that the holder is Tim Hudson (tjh@cryptsoft.com).
- * 
- * Copyright remains Eric Young's, and as such any Copyright notices in
- * the code are not to be removed.
- * If this package is used in a product, Eric Young should be given attribution
- * as the author of the parts of the library used.
- * This can be in the form of a textual message at program startup or
- * in documentation (online or textual) provided with the package.
- * 
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions
- * are met:
- * 1. Redistributions of source code must retain the copyright
- *    notice, this list of conditions and the following disclaimer.
- * 2. Redistributions in binary form must reproduce the above copyright
- *    notice, this list of conditions and the following disclaimer in the
- *    documentation and/or other materials provided with the distribution.
- * 3. All advertising materials mentioning features or use of this software
- *    must display the following acknowledgement:
- *    "This product includes cryptographic software written by
- *     Eric Young (eay@cryptsoft.com)"
- *    The word 'cryptographic' can be left out if the rouines from the library
- *    being used are not cryptographic related :-).
- * 4. If you include any Windows specific code (or a derivative thereof) from 
- *    the apps directory (application code) you must include an acknowledgement:
- *    "This product includes software written by Tim Hudson (tjh@cryptsoft.com)"
- * 
- * THIS SOFTWARE IS PROVIDED BY ERIC YOUNG ``AS IS'' AND
- * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
- * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
- * ARE DISCLAIMED.  IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE
- * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
- * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
- * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
- * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
- * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
- * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
- * SUCH DAMAGE.
- * 
- * The licence and distribution terms for any publically available version or
- * derivative of this code cannot be changed.  i.e. this code cannot simply be
- * copied and put under another distribution licence
- * [including the GNU Public Licence.]
- */
-
-#include <stdio.h>
-#undef SSLEAY_MACROS
-#include <openssl/stack.h>
-#include "cryptlib.h"
-#include <openssl/buffer.h>
-#include <openssl/asn1.h>
-#include <openssl/evp.h>
-#include <openssl/x509.h>
-#ifndef OPENSSL_NO_RSA
-#include <openssl/rsa.h>
-#endif
-#ifndef OPENSSL_NO_DSA
-#include <openssl/dsa.h>
-#endif
-
-int X509_verify(X509 *a, EVP_PKEY *r)
-	{
-	return(ASN1_item_verify(ASN1_ITEM_rptr(X509_CINF),a->sig_alg,
-		a->signature,a->cert_info,r));
-	}
-
-int X509_REQ_verify(X509_REQ *a, EVP_PKEY *r)
-	{
-	return( ASN1_item_verify(ASN1_ITEM_rptr(X509_REQ_INFO),
-		a->sig_alg,a->signature,a->req_info,r));
-	}
-
-int X509_CRL_verify(X509_CRL *a, EVP_PKEY *r)
-	{
-	return(ASN1_item_verify(ASN1_ITEM_rptr(X509_CRL_INFO),
-		a->sig_alg, a->signature,a->crl,r));
-	}
-
-int NETSCAPE_SPKI_verify(NETSCAPE_SPKI *a, EVP_PKEY *r)
-	{
-	return(ASN1_item_verify(ASN1_ITEM_rptr(NETSCAPE_SPKAC),
-		a->sig_algor,a->signature,a->spkac,r));
-	}
-
-int X509_sign(X509 *x, EVP_PKEY *pkey, const EVP_MD *md)
-	{
-	return(ASN1_item_sign(ASN1_ITEM_rptr(X509_CINF), x->cert_info->signature,
-		x->sig_alg, x->signature, x->cert_info,pkey,md));
-	}
-
-int X509_REQ_sign(X509_REQ *x, EVP_PKEY *pkey, const EVP_MD *md)
-	{
-	return(ASN1_item_sign(ASN1_ITEM_rptr(X509_REQ_INFO),x->sig_alg, NULL,
-		x->signature, x->req_info,pkey,md));
-	}
-
-int X509_CRL_sign(X509_CRL *x, EVP_PKEY *pkey, const EVP_MD *md)
-	{
-	x->crl->enc.modified = 1;
-	return(ASN1_item_sign(ASN1_ITEM_rptr(X509_CRL_INFO),x->crl->sig_alg,
-		x->sig_alg, x->signature, x->crl,pkey,md));
-	}
-
-int NETSCAPE_SPKI_sign(NETSCAPE_SPKI *x, EVP_PKEY *pkey, const EVP_MD *md)
-	{
-	return(ASN1_item_sign(ASN1_ITEM_rptr(NETSCAPE_SPKAC), x->sig_algor,NULL,
-		x->signature, x->spkac,pkey,md));
-	}
-
-#ifndef OPENSSL_NO_FP_API
-X509 *d2i_X509_fp(FILE *fp, X509 **x509)
-	{
-	return ASN1_item_d2i_fp(ASN1_ITEM_rptr(X509), fp, x509);
-	}
-
-int i2d_X509_fp(FILE *fp, X509 *x509)
-	{
-	return ASN1_item_i2d_fp(ASN1_ITEM_rptr(X509), fp, x509);
-	}
-#endif
-
-X509 *d2i_X509_bio(BIO *bp, X509 **x509)
-	{
-	return ASN1_item_d2i_bio(ASN1_ITEM_rptr(X509), bp, x509);
-	}
-
-int i2d_X509_bio(BIO *bp, X509 *x509)
-	{
-	return ASN1_item_i2d_bio(ASN1_ITEM_rptr(X509), bp, x509);
-	}
-
-#ifndef OPENSSL_NO_FP_API
-X509_CRL *d2i_X509_CRL_fp(FILE *fp, X509_CRL **crl)
-	{
-	return ASN1_item_d2i_fp(ASN1_ITEM_rptr(X509_CRL), fp, crl);
-	}
-
-int i2d_X509_CRL_fp(FILE *fp, X509_CRL *crl)
-	{
-	return ASN1_item_i2d_fp(ASN1_ITEM_rptr(X509_CRL), fp, crl);
-	}
-#endif
-
-X509_CRL *d2i_X509_CRL_bio(BIO *bp, X509_CRL **crl)
-	{
-	return ASN1_item_d2i_bio(ASN1_ITEM_rptr(X509_CRL), bp, crl);
-	}
-
-int i2d_X509_CRL_bio(BIO *bp, X509_CRL *crl)
-	{
-	return ASN1_item_i2d_bio(ASN1_ITEM_rptr(X509_CRL), bp, crl);
-	}
-
-#ifndef OPENSSL_NO_FP_API
-PKCS7 *d2i_PKCS7_fp(FILE *fp, PKCS7 **p7)
-	{
-	return ASN1_item_d2i_fp(ASN1_ITEM_rptr(PKCS7), fp, p7);
-	}
-
-int i2d_PKCS7_fp(FILE *fp, PKCS7 *p7)
-	{
-	return ASN1_item_i2d_fp(ASN1_ITEM_rptr(PKCS7), fp, p7);
-	}
-#endif
-
-PKCS7 *d2i_PKCS7_bio(BIO *bp, PKCS7 **p7)
-	{
-	return ASN1_item_d2i_bio(ASN1_ITEM_rptr(PKCS7), bp, p7);
-	}
-
-int i2d_PKCS7_bio(BIO *bp, PKCS7 *p7)
-	{
-	return ASN1_item_i2d_bio(ASN1_ITEM_rptr(PKCS7), bp, p7);
-	}
-
-#ifndef OPENSSL_NO_FP_API
-X509_REQ *d2i_X509_REQ_fp(FILE *fp, X509_REQ **req)
-	{
-	return ASN1_item_d2i_fp(ASN1_ITEM_rptr(X509_REQ), fp, req);
-	}
-
-int i2d_X509_REQ_fp(FILE *fp, X509_REQ *req)
-	{
-	return ASN1_item_i2d_fp(ASN1_ITEM_rptr(X509_REQ), fp, req);
-	}
-#endif
-
-X509_REQ *d2i_X509_REQ_bio(BIO *bp, X509_REQ **req)
-	{
-	return ASN1_item_d2i_bio(ASN1_ITEM_rptr(X509_REQ), bp, req);
-	}
-
-int i2d_X509_REQ_bio(BIO *bp, X509_REQ *req)
-	{
-	return ASN1_item_i2d_bio(ASN1_ITEM_rptr(X509_REQ), bp, req);
-	}
-
-#ifndef OPENSSL_NO_RSA
-
-#ifndef OPENSSL_NO_FP_API
-RSA *d2i_RSAPrivateKey_fp(FILE *fp, RSA **rsa)
-	{
-	return ASN1_item_d2i_fp(ASN1_ITEM_rptr(RSAPrivateKey), fp, rsa);
-	}
-
-int i2d_RSAPrivateKey_fp(FILE *fp, RSA *rsa)
-	{
-	return ASN1_item_i2d_fp(ASN1_ITEM_rptr(RSAPrivateKey), fp, rsa);
-	}
-
-RSA *d2i_RSAPublicKey_fp(FILE *fp, RSA **rsa)
-	{
-	return ASN1_item_d2i_fp(ASN1_ITEM_rptr(RSAPublicKey), fp, rsa);
-	}
-
-
-RSA *d2i_RSA_PUBKEY_fp(FILE *fp, RSA **rsa)
-	{
-	return ASN1_d2i_fp((void *(*)(void))
-			   RSA_new,(D2I_OF(void))d2i_RSA_PUBKEY, fp,
-			   (void **)rsa);
-	}
-
-int i2d_RSAPublicKey_fp(FILE *fp, RSA *rsa)
-	{
-	return ASN1_item_i2d_fp(ASN1_ITEM_rptr(RSAPublicKey), fp, rsa);
-	}
-
-int i2d_RSA_PUBKEY_fp(FILE *fp, RSA *rsa)
-	{
-	return ASN1_i2d_fp((I2D_OF(void))i2d_RSA_PUBKEY,fp,rsa);
-	}
-#endif
-
-RSA *d2i_RSAPrivateKey_bio(BIO *bp, RSA **rsa)
-	{
-	return ASN1_item_d2i_bio(ASN1_ITEM_rptr(RSAPrivateKey), bp, rsa);
-	}
-
-int i2d_RSAPrivateKey_bio(BIO *bp, RSA *rsa)
-	{
-	return ASN1_item_i2d_bio(ASN1_ITEM_rptr(RSAPrivateKey), bp, rsa);
-	}
-
-RSA *d2i_RSAPublicKey_bio(BIO *bp, RSA **rsa)
-	{
-	return ASN1_item_d2i_bio(ASN1_ITEM_rptr(RSAPublicKey), bp, rsa);
-	}
-
-
-RSA *d2i_RSA_PUBKEY_bio(BIO *bp, RSA **rsa)
-	{
-	return ASN1_d2i_bio_of(RSA,RSA_new,d2i_RSA_PUBKEY,bp,rsa);
-	}
-
-int i2d_RSAPublicKey_bio(BIO *bp, RSA *rsa)
-	{
-	return ASN1_item_i2d_bio(ASN1_ITEM_rptr(RSAPublicKey), bp, rsa);
-	}
-
-int i2d_RSA_PUBKEY_bio(BIO *bp, RSA *rsa)
-	{
-	return ASN1_i2d_bio_of(RSA,i2d_RSA_PUBKEY,bp,rsa);
-	}
-#endif
-
-#ifndef OPENSSL_NO_DSA
-#ifndef OPENSSL_NO_FP_API
-DSA *d2i_DSAPrivateKey_fp(FILE *fp, DSA **dsa)
-	{
-	return ASN1_d2i_fp_of(DSA,DSA_new,d2i_DSAPrivateKey,fp,dsa);
-	}
-
-int i2d_DSAPrivateKey_fp(FILE *fp, DSA *dsa)
-	{
-	return ASN1_i2d_fp_of_const(DSA,i2d_DSAPrivateKey,fp,dsa);
-	}
-
-DSA *d2i_DSA_PUBKEY_fp(FILE *fp, DSA **dsa)
-	{
-	return ASN1_d2i_fp_of(DSA,DSA_new,d2i_DSA_PUBKEY,fp,dsa);
-	}
-
-int i2d_DSA_PUBKEY_fp(FILE *fp, DSA *dsa)
-	{
-	return ASN1_i2d_fp_of(DSA,i2d_DSA_PUBKEY,fp,dsa);
-	}
-#endif
-
-DSA *d2i_DSAPrivateKey_bio(BIO *bp, DSA **dsa)
-	{
-	return ASN1_d2i_bio_of(DSA,DSA_new,d2i_DSAPrivateKey,bp,dsa
-);
-	}
-
-int i2d_DSAPrivateKey_bio(BIO *bp, DSA *dsa)
-	{
-	return ASN1_i2d_bio_of_const(DSA,i2d_DSAPrivateKey,bp,dsa);
-	}
-
-DSA *d2i_DSA_PUBKEY_bio(BIO *bp, DSA **dsa)
-	{
-	return ASN1_d2i_bio_of(DSA,DSA_new,d2i_DSA_PUBKEY,bp,dsa);
-	}
-
-int i2d_DSA_PUBKEY_bio(BIO *bp, DSA *dsa)
-	{
-	return ASN1_i2d_bio_of(DSA,i2d_DSA_PUBKEY,bp,dsa);
-	}
-
-#endif
-
-#ifndef OPENSSL_NO_EC
-#ifndef OPENSSL_NO_FP_API
-EC_KEY *d2i_EC_PUBKEY_fp(FILE *fp, EC_KEY **eckey)
-	{
-	return ASN1_d2i_fp_of(EC_KEY,EC_KEY_new,d2i_EC_PUBKEY,fp,eckey);
-	}
-  
-int i2d_EC_PUBKEY_fp(FILE *fp, EC_KEY *eckey)
-	{
-	return ASN1_i2d_fp_of(EC_KEY,i2d_EC_PUBKEY,fp,eckey);
-	}
-
-EC_KEY *d2i_ECPrivateKey_fp(FILE *fp, EC_KEY **eckey)
-	{
-	return ASN1_d2i_fp_of(EC_KEY,EC_KEY_new,d2i_ECPrivateKey,fp,eckey);
-	}
-  
-int i2d_ECPrivateKey_fp(FILE *fp, EC_KEY *eckey)
-	{
-	return ASN1_i2d_fp_of(EC_KEY,i2d_ECPrivateKey,fp,eckey);
-	}
-#endif
-EC_KEY *d2i_EC_PUBKEY_bio(BIO *bp, EC_KEY **eckey)
-	{
-	return ASN1_d2i_bio_of(EC_KEY,EC_KEY_new,d2i_EC_PUBKEY,bp,eckey);
-	}
-  
-int i2d_EC_PUBKEY_bio(BIO *bp, EC_KEY *ecdsa)
-	{
-	return ASN1_i2d_bio_of(EC_KEY,i2d_EC_PUBKEY,bp,ecdsa);
-	}
-
-EC_KEY *d2i_ECPrivateKey_bio(BIO *bp, EC_KEY **eckey)
-	{
-	return ASN1_d2i_bio_of(EC_KEY,EC_KEY_new,d2i_ECPrivateKey,bp,eckey);
-	}
-  
-int i2d_ECPrivateKey_bio(BIO *bp, EC_KEY *eckey)
-	{
-	return ASN1_i2d_bio_of(EC_KEY,i2d_ECPrivateKey,bp,eckey);
-	}
-#endif
-
-
-int X509_pubkey_digest(const X509 *data, const EVP_MD *type, unsigned char *md,
-	     unsigned int *len)
-	{
-	ASN1_BIT_STRING *key;
-	key = X509_get0_pubkey_bitstr(data);
-	if(!key) return 0;
-	return EVP_Digest(key->data, key->length, md, len, type, NULL);
-	}
-
-int X509_digest(const X509 *data, const EVP_MD *type, unsigned char *md,
-	     unsigned int *len)
-	{
-	return(ASN1_item_digest(ASN1_ITEM_rptr(X509),type,(char *)data,md,len));
-	}
-
-int X509_CRL_digest(const X509_CRL *data, const EVP_MD *type, unsigned char *md,
-	     unsigned int *len)
-	{
-	return(ASN1_item_digest(ASN1_ITEM_rptr(X509_CRL),type,(char *)data,md,len));
-	}
-
-int X509_REQ_digest(const X509_REQ *data, const EVP_MD *type, unsigned char *md,
-	     unsigned int *len)
-	{
-	return(ASN1_item_digest(ASN1_ITEM_rptr(X509_REQ),type,(char *)data,md,len));
-	}
-
-int X509_NAME_digest(const X509_NAME *data, const EVP_MD *type, unsigned char *md,
-	     unsigned int *len)
-	{
-	return(ASN1_item_digest(ASN1_ITEM_rptr(X509_NAME),type,(char *)data,md,len));
-	}
-
-int PKCS7_ISSUER_AND_SERIAL_digest(PKCS7_ISSUER_AND_SERIAL *data, const EVP_MD *type,
-	     unsigned char *md, unsigned int *len)
-	{
-	return(ASN1_item_digest(ASN1_ITEM_rptr(PKCS7_ISSUER_AND_SERIAL),type,
-		(char *)data,md,len));
-	}
-
-
-#ifndef OPENSSL_NO_FP_API
-X509_SIG *d2i_PKCS8_fp(FILE *fp, X509_SIG **p8)
-	{
-	return ASN1_d2i_fp_of(X509_SIG,X509_SIG_new,d2i_X509_SIG,fp,p8);
-	}
-
-int i2d_PKCS8_fp(FILE *fp, X509_SIG *p8)
-	{
-	return ASN1_i2d_fp_of(X509_SIG,i2d_X509_SIG,fp,p8);
-	}
-#endif
-
-X509_SIG *d2i_PKCS8_bio(BIO *bp, X509_SIG **p8)
-	{
-	return ASN1_d2i_bio_of(X509_SIG,X509_SIG_new,d2i_X509_SIG,bp,p8);
-	}
-
-int i2d_PKCS8_bio(BIO *bp, X509_SIG *p8)
-	{
-	return ASN1_i2d_bio_of(X509_SIG,i2d_X509_SIG,bp,p8);
-	}
-
-#ifndef OPENSSL_NO_FP_API
-PKCS8_PRIV_KEY_INFO *d2i_PKCS8_PRIV_KEY_INFO_fp(FILE *fp,
-						 PKCS8_PRIV_KEY_INFO **p8inf)
-	{
-	return ASN1_d2i_fp_of(PKCS8_PRIV_KEY_INFO,PKCS8_PRIV_KEY_INFO_new,
-			      d2i_PKCS8_PRIV_KEY_INFO,fp,p8inf);
-	}
-
-int i2d_PKCS8_PRIV_KEY_INFO_fp(FILE *fp, PKCS8_PRIV_KEY_INFO *p8inf)
-	{
-	return ASN1_i2d_fp_of(PKCS8_PRIV_KEY_INFO,i2d_PKCS8_PRIV_KEY_INFO,fp,
-			      p8inf);
-	}
-
-int i2d_PKCS8PrivateKeyInfo_fp(FILE *fp, EVP_PKEY *key)
-	{
-	PKCS8_PRIV_KEY_INFO *p8inf;
-	int ret;
-	p8inf = EVP_PKEY2PKCS8(key);
-	if(!p8inf) return 0;
-	ret = i2d_PKCS8_PRIV_KEY_INFO_fp(fp, p8inf);
-	PKCS8_PRIV_KEY_INFO_free(p8inf);
-	return ret;
-	}
-
-int i2d_PrivateKey_fp(FILE *fp, EVP_PKEY *pkey)
-	{
-	return ASN1_i2d_fp_of(EVP_PKEY,i2d_PrivateKey,fp,pkey);
-	}
-
-EVP_PKEY *d2i_PrivateKey_fp(FILE *fp, EVP_PKEY **a)
-{
-	return ASN1_d2i_fp_of(EVP_PKEY,EVP_PKEY_new,d2i_AutoPrivateKey,fp,a);
-}
-
-int i2d_PUBKEY_fp(FILE *fp, EVP_PKEY *pkey)
-	{
-	return ASN1_i2d_fp_of(EVP_PKEY,i2d_PUBKEY,fp,pkey);
-	}
-
-EVP_PKEY *d2i_PUBKEY_fp(FILE *fp, EVP_PKEY **a)
-{
-	return ASN1_d2i_fp_of(EVP_PKEY,EVP_PKEY_new,d2i_PUBKEY,fp,a);
-}
-
-#endif
-
-PKCS8_PRIV_KEY_INFO *d2i_PKCS8_PRIV_KEY_INFO_bio(BIO *bp,
-						 PKCS8_PRIV_KEY_INFO **p8inf)
-	{
-	return ASN1_d2i_bio_of(PKCS8_PRIV_KEY_INFO,PKCS8_PRIV_KEY_INFO_new,
-			    d2i_PKCS8_PRIV_KEY_INFO,bp,p8inf);
-	}
-
-int i2d_PKCS8_PRIV_KEY_INFO_bio(BIO *bp, PKCS8_PRIV_KEY_INFO *p8inf)
-	{
-	return ASN1_i2d_bio_of(PKCS8_PRIV_KEY_INFO,i2d_PKCS8_PRIV_KEY_INFO,bp,
-			       p8inf);
-	}
-
-int i2d_PKCS8PrivateKeyInfo_bio(BIO *bp, EVP_PKEY *key)
-	{
-	PKCS8_PRIV_KEY_INFO *p8inf;
-	int ret;
-	p8inf = EVP_PKEY2PKCS8(key);
-	if(!p8inf) return 0;
-	ret = i2d_PKCS8_PRIV_KEY_INFO_bio(bp, p8inf);
-	PKCS8_PRIV_KEY_INFO_free(p8inf);
-	return ret;
-	}
-
-int i2d_PrivateKey_bio(BIO *bp, EVP_PKEY *pkey)
-	{
-	return ASN1_i2d_bio_of(EVP_PKEY,i2d_PrivateKey,bp,pkey);
-	}
-
-EVP_PKEY *d2i_PrivateKey_bio(BIO *bp, EVP_PKEY **a)
-	{
-	return ASN1_d2i_bio_of(EVP_PKEY,EVP_PKEY_new,d2i_AutoPrivateKey,bp,a);
-	}
-
-int i2d_PUBKEY_bio(BIO *bp, EVP_PKEY *pkey)
-	{
-	return ASN1_i2d_bio_of(EVP_PKEY,i2d_PUBKEY,bp,pkey);
-	}
-
-EVP_PKEY *d2i_PUBKEY_bio(BIO *bp, EVP_PKEY **a)
-	{
-	return ASN1_d2i_bio_of(EVP_PKEY,EVP_PKEY_new,d2i_PUBKEY,bp,a);
-	}
diff --git a/crypto/openssl/crypto/x509v3/Makefile b/crypto/openssl/crypto/x509v3/Makefile
deleted file mode 100644
index 556ef351bf88..000000000000
--- a/crypto/openssl/crypto/x509v3/Makefile
+++ /dev/null
@@ -1,591 +0,0 @@
-#
-# OpenSSL/crypto/x509v3/Makefile
-#
-
-DIR=	x509v3
-TOP=	../..
-CC=	cc
-INCLUDES= -I.. -I$(TOP) -I../../include
-CFLAG=-g
-MAKEFILE=	Makefile
-AR=		ar r
-
-CFLAGS= $(INCLUDES) $(CFLAG)
-
-GENERAL=Makefile README
-TEST=
-APPS=
-
-LIB=$(TOP)/libcrypto.a
-LIBSRC=	v3_bcons.c v3_bitst.c v3_conf.c v3_extku.c v3_ia5.c v3_lib.c \
-v3_prn.c v3_utl.c v3err.c v3_genn.c v3_alt.c v3_skey.c v3_akey.c v3_pku.c \
-v3_int.c v3_enum.c v3_sxnet.c v3_cpols.c v3_crld.c v3_purp.c v3_info.c \
-v3_ocsp.c v3_akeya.c v3_pmaps.c v3_pcons.c v3_ncons.c v3_pcia.c v3_pci.c \
-pcy_cache.c pcy_node.c pcy_data.c pcy_map.c pcy_tree.c pcy_lib.c \
-v3_asid.c v3_addr.c
-LIBOBJ= v3_bcons.o v3_bitst.o v3_conf.o v3_extku.o v3_ia5.o v3_lib.o \
-v3_prn.o v3_utl.o v3err.o v3_genn.o v3_alt.o v3_skey.o v3_akey.o v3_pku.o \
-v3_int.o v3_enum.o v3_sxnet.o v3_cpols.o v3_crld.o v3_purp.o v3_info.o \
-v3_ocsp.o v3_akeya.o v3_pmaps.o v3_pcons.o v3_ncons.o v3_pcia.o v3_pci.o \
-pcy_cache.o pcy_node.o pcy_data.o pcy_map.o pcy_tree.o pcy_lib.o \
-v3_asid.o v3_addr.o
-
-SRC= $(LIBSRC)
-
-EXHEADER= x509v3.h
-HEADER=	$(EXHEADER) pcy_int.h
-
-ALL=    $(GENERAL) $(SRC) $(HEADER)
-
-top:
-	(cd ../..; $(MAKE) DIRS=crypto SDIRS=$(DIR) sub_all)
-
-all:	lib
-
-lib:	$(LIBOBJ)
-	$(AR) $(LIB) $(LIBOBJ)
-	$(RANLIB) $(LIB) || echo Never mind.
-	@touch lib
-
-files:
-	$(PERL) $(TOP)/util/files.pl Makefile >> $(TOP)/MINFO
-
-links:
-	@$(PERL) $(TOP)/util/mklink.pl ../../include/openssl $(EXHEADER)
-	@$(PERL) $(TOP)/util/mklink.pl ../../test $(TEST)
-	@$(PERL) $(TOP)/util/mklink.pl ../../apps $(APPS)
-
-install:
-	@[ -n "$(INSTALLTOP)" ] # should be set by top Makefile...
-	@headerlist="$(EXHEADER)"; for i in $$headerlist ; \
-	do  \
-	(cp $$i $(INSTALL_PREFIX)$(INSTALLTOP)/include/openssl/$$i; \
-	chmod 644 $(INSTALL_PREFIX)$(INSTALLTOP)/include/openssl/$$i ); \
-	done;
-
-tags:
-	ctags $(SRC)
-
-tests:
-
-lint:
-	lint -DLINT $(INCLUDES) $(SRC)>fluff
-
-depend:
-	@[ -n "$(MAKEDEPEND)" ] # should be set by upper Makefile...
-	$(MAKEDEPEND) -- $(CFLAG) $(INCLUDES) $(DEPFLAG) -- $(PROGS) $(LIBSRC)
-
-dclean:
-	$(PERL) -pe 'if (/^# DO NOT DELETE THIS LINE/) {print; exit(0);}' $(MAKEFILE) >Makefile.new
-	mv -f Makefile.new $(MAKEFILE)
-
-clean:
-	rm -f *.o *.obj lib tags core .pure .nfs* *.old *.bak fluff
-
-# DO NOT DELETE THIS LINE -- make depend depends on it.
-
-pcy_cache.o: ../../e_os.h ../../include/openssl/asn1.h
-pcy_cache.o: ../../include/openssl/bio.h ../../include/openssl/buffer.h
-pcy_cache.o: ../../include/openssl/conf.h ../../include/openssl/crypto.h
-pcy_cache.o: ../../include/openssl/e_os2.h ../../include/openssl/ec.h
-pcy_cache.o: ../../include/openssl/ecdh.h ../../include/openssl/ecdsa.h
-pcy_cache.o: ../../include/openssl/err.h ../../include/openssl/evp.h
-pcy_cache.o: ../../include/openssl/lhash.h ../../include/openssl/obj_mac.h
-pcy_cache.o: ../../include/openssl/objects.h
-pcy_cache.o: ../../include/openssl/opensslconf.h
-pcy_cache.o: ../../include/openssl/opensslv.h ../../include/openssl/ossl_typ.h
-pcy_cache.o: ../../include/openssl/pkcs7.h ../../include/openssl/safestack.h
-pcy_cache.o: ../../include/openssl/sha.h ../../include/openssl/stack.h
-pcy_cache.o: ../../include/openssl/symhacks.h ../../include/openssl/x509.h
-pcy_cache.o: ../../include/openssl/x509_vfy.h ../../include/openssl/x509v3.h
-pcy_cache.o: ../cryptlib.h pcy_cache.c pcy_int.h
-pcy_data.o: ../../e_os.h ../../include/openssl/asn1.h
-pcy_data.o: ../../include/openssl/bio.h ../../include/openssl/buffer.h
-pcy_data.o: ../../include/openssl/conf.h ../../include/openssl/crypto.h
-pcy_data.o: ../../include/openssl/e_os2.h ../../include/openssl/ec.h
-pcy_data.o: ../../include/openssl/ecdh.h ../../include/openssl/ecdsa.h
-pcy_data.o: ../../include/openssl/err.h ../../include/openssl/evp.h
-pcy_data.o: ../../include/openssl/lhash.h ../../include/openssl/obj_mac.h
-pcy_data.o: ../../include/openssl/objects.h ../../include/openssl/opensslconf.h
-pcy_data.o: ../../include/openssl/opensslv.h ../../include/openssl/ossl_typ.h
-pcy_data.o: ../../include/openssl/pkcs7.h ../../include/openssl/safestack.h
-pcy_data.o: ../../include/openssl/sha.h ../../include/openssl/stack.h
-pcy_data.o: ../../include/openssl/symhacks.h ../../include/openssl/x509.h
-pcy_data.o: ../../include/openssl/x509_vfy.h ../../include/openssl/x509v3.h
-pcy_data.o: ../cryptlib.h pcy_data.c pcy_int.h
-pcy_lib.o: ../../e_os.h ../../include/openssl/asn1.h
-pcy_lib.o: ../../include/openssl/bio.h ../../include/openssl/buffer.h
-pcy_lib.o: ../../include/openssl/conf.h ../../include/openssl/crypto.h
-pcy_lib.o: ../../include/openssl/e_os2.h ../../include/openssl/ec.h
-pcy_lib.o: ../../include/openssl/ecdh.h ../../include/openssl/ecdsa.h
-pcy_lib.o: ../../include/openssl/err.h ../../include/openssl/evp.h
-pcy_lib.o: ../../include/openssl/lhash.h ../../include/openssl/obj_mac.h
-pcy_lib.o: ../../include/openssl/objects.h ../../include/openssl/opensslconf.h
-pcy_lib.o: ../../include/openssl/opensslv.h ../../include/openssl/ossl_typ.h
-pcy_lib.o: ../../include/openssl/pkcs7.h ../../include/openssl/safestack.h
-pcy_lib.o: ../../include/openssl/sha.h ../../include/openssl/stack.h
-pcy_lib.o: ../../include/openssl/symhacks.h ../../include/openssl/x509.h
-pcy_lib.o: ../../include/openssl/x509_vfy.h ../../include/openssl/x509v3.h
-pcy_lib.o: ../cryptlib.h pcy_int.h pcy_lib.c
-pcy_map.o: ../../e_os.h ../../include/openssl/asn1.h
-pcy_map.o: ../../include/openssl/bio.h ../../include/openssl/buffer.h
-pcy_map.o: ../../include/openssl/conf.h ../../include/openssl/crypto.h
-pcy_map.o: ../../include/openssl/e_os2.h ../../include/openssl/ec.h
-pcy_map.o: ../../include/openssl/ecdh.h ../../include/openssl/ecdsa.h
-pcy_map.o: ../../include/openssl/err.h ../../include/openssl/evp.h
-pcy_map.o: ../../include/openssl/lhash.h ../../include/openssl/obj_mac.h
-pcy_map.o: ../../include/openssl/objects.h ../../include/openssl/opensslconf.h
-pcy_map.o: ../../include/openssl/opensslv.h ../../include/openssl/ossl_typ.h
-pcy_map.o: ../../include/openssl/pkcs7.h ../../include/openssl/safestack.h
-pcy_map.o: ../../include/openssl/sha.h ../../include/openssl/stack.h
-pcy_map.o: ../../include/openssl/symhacks.h ../../include/openssl/x509.h
-pcy_map.o: ../../include/openssl/x509_vfy.h ../../include/openssl/x509v3.h
-pcy_map.o: ../cryptlib.h pcy_int.h pcy_map.c
-pcy_node.o: ../../include/openssl/asn1.h ../../include/openssl/bio.h
-pcy_node.o: ../../include/openssl/buffer.h ../../include/openssl/conf.h
-pcy_node.o: ../../include/openssl/crypto.h ../../include/openssl/e_os2.h
-pcy_node.o: ../../include/openssl/ec.h ../../include/openssl/ecdh.h
-pcy_node.o: ../../include/openssl/ecdsa.h ../../include/openssl/evp.h
-pcy_node.o: ../../include/openssl/lhash.h ../../include/openssl/obj_mac.h
-pcy_node.o: ../../include/openssl/objects.h ../../include/openssl/opensslconf.h
-pcy_node.o: ../../include/openssl/opensslv.h ../../include/openssl/ossl_typ.h
-pcy_node.o: ../../include/openssl/pkcs7.h ../../include/openssl/safestack.h
-pcy_node.o: ../../include/openssl/sha.h ../../include/openssl/stack.h
-pcy_node.o: ../../include/openssl/symhacks.h ../../include/openssl/x509.h
-pcy_node.o: ../../include/openssl/x509_vfy.h ../../include/openssl/x509v3.h
-pcy_node.o: pcy_int.h pcy_node.c
-pcy_tree.o: ../../e_os.h ../../include/openssl/asn1.h
-pcy_tree.o: ../../include/openssl/bio.h ../../include/openssl/buffer.h
-pcy_tree.o: ../../include/openssl/conf.h ../../include/openssl/crypto.h
-pcy_tree.o: ../../include/openssl/e_os2.h ../../include/openssl/ec.h
-pcy_tree.o: ../../include/openssl/ecdh.h ../../include/openssl/ecdsa.h
-pcy_tree.o: ../../include/openssl/err.h ../../include/openssl/evp.h
-pcy_tree.o: ../../include/openssl/lhash.h ../../include/openssl/obj_mac.h
-pcy_tree.o: ../../include/openssl/objects.h ../../include/openssl/opensslconf.h
-pcy_tree.o: ../../include/openssl/opensslv.h ../../include/openssl/ossl_typ.h
-pcy_tree.o: ../../include/openssl/pkcs7.h ../../include/openssl/safestack.h
-pcy_tree.o: ../../include/openssl/sha.h ../../include/openssl/stack.h
-pcy_tree.o: ../../include/openssl/symhacks.h ../../include/openssl/x509.h
-pcy_tree.o: ../../include/openssl/x509_vfy.h ../../include/openssl/x509v3.h
-pcy_tree.o: ../cryptlib.h pcy_int.h pcy_tree.c
-v3_addr.o: ../../e_os.h ../../include/openssl/asn1.h
-v3_addr.o: ../../include/openssl/asn1t.h ../../include/openssl/bio.h
-v3_addr.o: ../../include/openssl/buffer.h ../../include/openssl/conf.h
-v3_addr.o: ../../include/openssl/crypto.h ../../include/openssl/e_os2.h
-v3_addr.o: ../../include/openssl/ec.h ../../include/openssl/ecdh.h
-v3_addr.o: ../../include/openssl/ecdsa.h ../../include/openssl/err.h
-v3_addr.o: ../../include/openssl/evp.h ../../include/openssl/lhash.h
-v3_addr.o: ../../include/openssl/obj_mac.h ../../include/openssl/objects.h
-v3_addr.o: ../../include/openssl/opensslconf.h ../../include/openssl/opensslv.h
-v3_addr.o: ../../include/openssl/ossl_typ.h ../../include/openssl/pkcs7.h
-v3_addr.o: ../../include/openssl/safestack.h ../../include/openssl/sha.h
-v3_addr.o: ../../include/openssl/stack.h ../../include/openssl/symhacks.h
-v3_addr.o: ../../include/openssl/x509.h ../../include/openssl/x509_vfy.h
-v3_addr.o: ../../include/openssl/x509v3.h ../cryptlib.h v3_addr.c
-v3_akey.o: ../../e_os.h ../../include/openssl/asn1.h
-v3_akey.o: ../../include/openssl/asn1t.h ../../include/openssl/bio.h
-v3_akey.o: ../../include/openssl/buffer.h ../../include/openssl/conf.h
-v3_akey.o: ../../include/openssl/crypto.h ../../include/openssl/e_os2.h
-v3_akey.o: ../../include/openssl/ec.h ../../include/openssl/ecdh.h
-v3_akey.o: ../../include/openssl/ecdsa.h ../../include/openssl/err.h
-v3_akey.o: ../../include/openssl/evp.h ../../include/openssl/lhash.h
-v3_akey.o: ../../include/openssl/obj_mac.h ../../include/openssl/objects.h
-v3_akey.o: ../../include/openssl/opensslconf.h ../../include/openssl/opensslv.h
-v3_akey.o: ../../include/openssl/ossl_typ.h ../../include/openssl/pkcs7.h
-v3_akey.o: ../../include/openssl/safestack.h ../../include/openssl/sha.h
-v3_akey.o: ../../include/openssl/stack.h ../../include/openssl/symhacks.h
-v3_akey.o: ../../include/openssl/x509.h ../../include/openssl/x509_vfy.h
-v3_akey.o: ../../include/openssl/x509v3.h ../cryptlib.h v3_akey.c
-v3_akeya.o: ../../e_os.h ../../include/openssl/asn1.h
-v3_akeya.o: ../../include/openssl/asn1t.h ../../include/openssl/bio.h
-v3_akeya.o: ../../include/openssl/buffer.h ../../include/openssl/conf.h
-v3_akeya.o: ../../include/openssl/crypto.h ../../include/openssl/e_os2.h
-v3_akeya.o: ../../include/openssl/ec.h ../../include/openssl/ecdh.h
-v3_akeya.o: ../../include/openssl/ecdsa.h ../../include/openssl/err.h
-v3_akeya.o: ../../include/openssl/evp.h ../../include/openssl/lhash.h
-v3_akeya.o: ../../include/openssl/obj_mac.h ../../include/openssl/objects.h
-v3_akeya.o: ../../include/openssl/opensslconf.h
-v3_akeya.o: ../../include/openssl/opensslv.h ../../include/openssl/ossl_typ.h
-v3_akeya.o: ../../include/openssl/pkcs7.h ../../include/openssl/safestack.h
-v3_akeya.o: ../../include/openssl/sha.h ../../include/openssl/stack.h
-v3_akeya.o: ../../include/openssl/symhacks.h ../../include/openssl/x509.h
-v3_akeya.o: ../../include/openssl/x509_vfy.h ../../include/openssl/x509v3.h
-v3_akeya.o: ../cryptlib.h v3_akeya.c
-v3_alt.o: ../../e_os.h ../../include/openssl/asn1.h ../../include/openssl/bio.h
-v3_alt.o: ../../include/openssl/buffer.h ../../include/openssl/conf.h
-v3_alt.o: ../../include/openssl/crypto.h ../../include/openssl/e_os2.h
-v3_alt.o: ../../include/openssl/ec.h ../../include/openssl/ecdh.h
-v3_alt.o: ../../include/openssl/ecdsa.h ../../include/openssl/err.h
-v3_alt.o: ../../include/openssl/evp.h ../../include/openssl/lhash.h
-v3_alt.o: ../../include/openssl/obj_mac.h ../../include/openssl/objects.h
-v3_alt.o: ../../include/openssl/opensslconf.h ../../include/openssl/opensslv.h
-v3_alt.o: ../../include/openssl/ossl_typ.h ../../include/openssl/pkcs7.h
-v3_alt.o: ../../include/openssl/safestack.h ../../include/openssl/sha.h
-v3_alt.o: ../../include/openssl/stack.h ../../include/openssl/symhacks.h
-v3_alt.o: ../../include/openssl/x509.h ../../include/openssl/x509_vfy.h
-v3_alt.o: ../../include/openssl/x509v3.h ../cryptlib.h v3_alt.c
-v3_asid.o: ../../e_os.h ../../include/openssl/asn1.h
-v3_asid.o: ../../include/openssl/asn1t.h ../../include/openssl/bio.h
-v3_asid.o: ../../include/openssl/bn.h ../../include/openssl/buffer.h
-v3_asid.o: ../../include/openssl/conf.h ../../include/openssl/crypto.h
-v3_asid.o: ../../include/openssl/e_os2.h ../../include/openssl/ec.h
-v3_asid.o: ../../include/openssl/ecdh.h ../../include/openssl/ecdsa.h
-v3_asid.o: ../../include/openssl/err.h ../../include/openssl/evp.h
-v3_asid.o: ../../include/openssl/lhash.h ../../include/openssl/obj_mac.h
-v3_asid.o: ../../include/openssl/objects.h ../../include/openssl/opensslconf.h
-v3_asid.o: ../../include/openssl/opensslv.h ../../include/openssl/ossl_typ.h
-v3_asid.o: ../../include/openssl/pkcs7.h ../../include/openssl/safestack.h
-v3_asid.o: ../../include/openssl/sha.h ../../include/openssl/stack.h
-v3_asid.o: ../../include/openssl/symhacks.h ../../include/openssl/x509.h
-v3_asid.o: ../../include/openssl/x509_vfy.h ../../include/openssl/x509v3.h
-v3_asid.o: ../cryptlib.h v3_asid.c
-v3_bcons.o: ../../e_os.h ../../include/openssl/asn1.h
-v3_bcons.o: ../../include/openssl/asn1t.h ../../include/openssl/bio.h
-v3_bcons.o: ../../include/openssl/buffer.h ../../include/openssl/conf.h
-v3_bcons.o: ../../include/openssl/crypto.h ../../include/openssl/e_os2.h
-v3_bcons.o: ../../include/openssl/ec.h ../../include/openssl/ecdh.h
-v3_bcons.o: ../../include/openssl/ecdsa.h ../../include/openssl/err.h
-v3_bcons.o: ../../include/openssl/evp.h ../../include/openssl/lhash.h
-v3_bcons.o: ../../include/openssl/obj_mac.h ../../include/openssl/objects.h
-v3_bcons.o: ../../include/openssl/opensslconf.h
-v3_bcons.o: ../../include/openssl/opensslv.h ../../include/openssl/ossl_typ.h
-v3_bcons.o: ../../include/openssl/pkcs7.h ../../include/openssl/safestack.h
-v3_bcons.o: ../../include/openssl/sha.h ../../include/openssl/stack.h
-v3_bcons.o: ../../include/openssl/symhacks.h ../../include/openssl/x509.h
-v3_bcons.o: ../../include/openssl/x509_vfy.h ../../include/openssl/x509v3.h
-v3_bcons.o: ../cryptlib.h v3_bcons.c
-v3_bitst.o: ../../e_os.h ../../include/openssl/asn1.h
-v3_bitst.o: ../../include/openssl/bio.h ../../include/openssl/buffer.h
-v3_bitst.o: ../../include/openssl/conf.h ../../include/openssl/crypto.h
-v3_bitst.o: ../../include/openssl/e_os2.h ../../include/openssl/ec.h
-v3_bitst.o: ../../include/openssl/ecdh.h ../../include/openssl/ecdsa.h
-v3_bitst.o: ../../include/openssl/err.h ../../include/openssl/evp.h
-v3_bitst.o: ../../include/openssl/lhash.h ../../include/openssl/obj_mac.h
-v3_bitst.o: ../../include/openssl/objects.h ../../include/openssl/opensslconf.h
-v3_bitst.o: ../../include/openssl/opensslv.h ../../include/openssl/ossl_typ.h
-v3_bitst.o: ../../include/openssl/pkcs7.h ../../include/openssl/safestack.h
-v3_bitst.o: ../../include/openssl/sha.h ../../include/openssl/stack.h
-v3_bitst.o: ../../include/openssl/symhacks.h ../../include/openssl/x509.h
-v3_bitst.o: ../../include/openssl/x509_vfy.h ../../include/openssl/x509v3.h
-v3_bitst.o: ../cryptlib.h v3_bitst.c
-v3_conf.o: ../../e_os.h ../../include/openssl/asn1.h
-v3_conf.o: ../../include/openssl/bio.h ../../include/openssl/buffer.h
-v3_conf.o: ../../include/openssl/conf.h ../../include/openssl/crypto.h
-v3_conf.o: ../../include/openssl/e_os2.h ../../include/openssl/ec.h
-v3_conf.o: ../../include/openssl/ecdh.h ../../include/openssl/ecdsa.h
-v3_conf.o: ../../include/openssl/err.h ../../include/openssl/evp.h
-v3_conf.o: ../../include/openssl/lhash.h ../../include/openssl/obj_mac.h
-v3_conf.o: ../../include/openssl/objects.h ../../include/openssl/opensslconf.h
-v3_conf.o: ../../include/openssl/opensslv.h ../../include/openssl/ossl_typ.h
-v3_conf.o: ../../include/openssl/pkcs7.h ../../include/openssl/safestack.h
-v3_conf.o: ../../include/openssl/sha.h ../../include/openssl/stack.h
-v3_conf.o: ../../include/openssl/symhacks.h ../../include/openssl/x509.h
-v3_conf.o: ../../include/openssl/x509_vfy.h ../../include/openssl/x509v3.h
-v3_conf.o: ../cryptlib.h v3_conf.c
-v3_cpols.o: ../../e_os.h ../../include/openssl/asn1.h
-v3_cpols.o: ../../include/openssl/asn1t.h ../../include/openssl/bio.h
-v3_cpols.o: ../../include/openssl/buffer.h ../../include/openssl/conf.h
-v3_cpols.o: ../../include/openssl/crypto.h ../../include/openssl/e_os2.h
-v3_cpols.o: ../../include/openssl/ec.h ../../include/openssl/ecdh.h
-v3_cpols.o: ../../include/openssl/ecdsa.h ../../include/openssl/err.h
-v3_cpols.o: ../../include/openssl/evp.h ../../include/openssl/lhash.h
-v3_cpols.o: ../../include/openssl/obj_mac.h ../../include/openssl/objects.h
-v3_cpols.o: ../../include/openssl/opensslconf.h
-v3_cpols.o: ../../include/openssl/opensslv.h ../../include/openssl/ossl_typ.h
-v3_cpols.o: ../../include/openssl/pkcs7.h ../../include/openssl/safestack.h
-v3_cpols.o: ../../include/openssl/sha.h ../../include/openssl/stack.h
-v3_cpols.o: ../../include/openssl/symhacks.h ../../include/openssl/x509.h
-v3_cpols.o: ../../include/openssl/x509_vfy.h ../../include/openssl/x509v3.h
-v3_cpols.o: ../cryptlib.h pcy_int.h v3_cpols.c
-v3_crld.o: ../../e_os.h ../../include/openssl/asn1.h
-v3_crld.o: ../../include/openssl/asn1t.h ../../include/openssl/bio.h
-v3_crld.o: ../../include/openssl/buffer.h ../../include/openssl/conf.h
-v3_crld.o: ../../include/openssl/crypto.h ../../include/openssl/e_os2.h
-v3_crld.o: ../../include/openssl/ec.h ../../include/openssl/ecdh.h
-v3_crld.o: ../../include/openssl/ecdsa.h ../../include/openssl/err.h
-v3_crld.o: ../../include/openssl/evp.h ../../include/openssl/lhash.h
-v3_crld.o: ../../include/openssl/obj_mac.h ../../include/openssl/objects.h
-v3_crld.o: ../../include/openssl/opensslconf.h ../../include/openssl/opensslv.h
-v3_crld.o: ../../include/openssl/ossl_typ.h ../../include/openssl/pkcs7.h
-v3_crld.o: ../../include/openssl/safestack.h ../../include/openssl/sha.h
-v3_crld.o: ../../include/openssl/stack.h ../../include/openssl/symhacks.h
-v3_crld.o: ../../include/openssl/x509.h ../../include/openssl/x509_vfy.h
-v3_crld.o: ../../include/openssl/x509v3.h ../cryptlib.h v3_crld.c
-v3_enum.o: ../../e_os.h ../../include/openssl/asn1.h
-v3_enum.o: ../../include/openssl/bio.h ../../include/openssl/buffer.h
-v3_enum.o: ../../include/openssl/conf.h ../../include/openssl/crypto.h
-v3_enum.o: ../../include/openssl/e_os2.h ../../include/openssl/ec.h
-v3_enum.o: ../../include/openssl/ecdh.h ../../include/openssl/ecdsa.h
-v3_enum.o: ../../include/openssl/err.h ../../include/openssl/evp.h
-v3_enum.o: ../../include/openssl/lhash.h ../../include/openssl/obj_mac.h
-v3_enum.o: ../../include/openssl/objects.h ../../include/openssl/opensslconf.h
-v3_enum.o: ../../include/openssl/opensslv.h ../../include/openssl/ossl_typ.h
-v3_enum.o: ../../include/openssl/pkcs7.h ../../include/openssl/safestack.h
-v3_enum.o: ../../include/openssl/sha.h ../../include/openssl/stack.h
-v3_enum.o: ../../include/openssl/symhacks.h ../../include/openssl/x509.h
-v3_enum.o: ../../include/openssl/x509_vfy.h ../../include/openssl/x509v3.h
-v3_enum.o: ../cryptlib.h v3_enum.c
-v3_extku.o: ../../e_os.h ../../include/openssl/asn1.h
-v3_extku.o: ../../include/openssl/asn1t.h ../../include/openssl/bio.h
-v3_extku.o: ../../include/openssl/buffer.h ../../include/openssl/conf.h
-v3_extku.o: ../../include/openssl/crypto.h ../../include/openssl/e_os2.h
-v3_extku.o: ../../include/openssl/ec.h ../../include/openssl/ecdh.h
-v3_extku.o: ../../include/openssl/ecdsa.h ../../include/openssl/err.h
-v3_extku.o: ../../include/openssl/evp.h ../../include/openssl/lhash.h
-v3_extku.o: ../../include/openssl/obj_mac.h ../../include/openssl/objects.h
-v3_extku.o: ../../include/openssl/opensslconf.h
-v3_extku.o: ../../include/openssl/opensslv.h ../../include/openssl/ossl_typ.h
-v3_extku.o: ../../include/openssl/pkcs7.h ../../include/openssl/safestack.h
-v3_extku.o: ../../include/openssl/sha.h ../../include/openssl/stack.h
-v3_extku.o: ../../include/openssl/symhacks.h ../../include/openssl/x509.h
-v3_extku.o: ../../include/openssl/x509_vfy.h ../../include/openssl/x509v3.h
-v3_extku.o: ../cryptlib.h v3_extku.c
-v3_genn.o: ../../e_os.h ../../include/openssl/asn1.h
-v3_genn.o: ../../include/openssl/asn1t.h ../../include/openssl/bio.h
-v3_genn.o: ../../include/openssl/buffer.h ../../include/openssl/conf.h
-v3_genn.o: ../../include/openssl/crypto.h ../../include/openssl/e_os2.h
-v3_genn.o: ../../include/openssl/ec.h ../../include/openssl/ecdh.h
-v3_genn.o: ../../include/openssl/ecdsa.h ../../include/openssl/err.h
-v3_genn.o: ../../include/openssl/evp.h ../../include/openssl/lhash.h
-v3_genn.o: ../../include/openssl/obj_mac.h ../../include/openssl/objects.h
-v3_genn.o: ../../include/openssl/opensslconf.h ../../include/openssl/opensslv.h
-v3_genn.o: ../../include/openssl/ossl_typ.h ../../include/openssl/pkcs7.h
-v3_genn.o: ../../include/openssl/safestack.h ../../include/openssl/sha.h
-v3_genn.o: ../../include/openssl/stack.h ../../include/openssl/symhacks.h
-v3_genn.o: ../../include/openssl/x509.h ../../include/openssl/x509_vfy.h
-v3_genn.o: ../../include/openssl/x509v3.h ../cryptlib.h v3_genn.c
-v3_ia5.o: ../../e_os.h ../../include/openssl/asn1.h ../../include/openssl/bio.h
-v3_ia5.o: ../../include/openssl/buffer.h ../../include/openssl/conf.h
-v3_ia5.o: ../../include/openssl/crypto.h ../../include/openssl/e_os2.h
-v3_ia5.o: ../../include/openssl/ec.h ../../include/openssl/ecdh.h
-v3_ia5.o: ../../include/openssl/ecdsa.h ../../include/openssl/err.h
-v3_ia5.o: ../../include/openssl/evp.h ../../include/openssl/lhash.h
-v3_ia5.o: ../../include/openssl/obj_mac.h ../../include/openssl/objects.h
-v3_ia5.o: ../../include/openssl/opensslconf.h ../../include/openssl/opensslv.h
-v3_ia5.o: ../../include/openssl/ossl_typ.h ../../include/openssl/pkcs7.h
-v3_ia5.o: ../../include/openssl/safestack.h ../../include/openssl/sha.h
-v3_ia5.o: ../../include/openssl/stack.h ../../include/openssl/symhacks.h
-v3_ia5.o: ../../include/openssl/x509.h ../../include/openssl/x509_vfy.h
-v3_ia5.o: ../../include/openssl/x509v3.h ../cryptlib.h v3_ia5.c
-v3_info.o: ../../e_os.h ../../include/openssl/asn1.h
-v3_info.o: ../../include/openssl/asn1t.h ../../include/openssl/bio.h
-v3_info.o: ../../include/openssl/buffer.h ../../include/openssl/conf.h
-v3_info.o: ../../include/openssl/crypto.h ../../include/openssl/e_os2.h
-v3_info.o: ../../include/openssl/ec.h ../../include/openssl/ecdh.h
-v3_info.o: ../../include/openssl/ecdsa.h ../../include/openssl/err.h
-v3_info.o: ../../include/openssl/evp.h ../../include/openssl/lhash.h
-v3_info.o: ../../include/openssl/obj_mac.h ../../include/openssl/objects.h
-v3_info.o: ../../include/openssl/opensslconf.h ../../include/openssl/opensslv.h
-v3_info.o: ../../include/openssl/ossl_typ.h ../../include/openssl/pkcs7.h
-v3_info.o: ../../include/openssl/safestack.h ../../include/openssl/sha.h
-v3_info.o: ../../include/openssl/stack.h ../../include/openssl/symhacks.h
-v3_info.o: ../../include/openssl/x509.h ../../include/openssl/x509_vfy.h
-v3_info.o: ../../include/openssl/x509v3.h ../cryptlib.h v3_info.c
-v3_int.o: ../../e_os.h ../../include/openssl/asn1.h ../../include/openssl/bio.h
-v3_int.o: ../../include/openssl/buffer.h ../../include/openssl/conf.h
-v3_int.o: ../../include/openssl/crypto.h ../../include/openssl/e_os2.h
-v3_int.o: ../../include/openssl/ec.h ../../include/openssl/ecdh.h
-v3_int.o: ../../include/openssl/ecdsa.h ../../include/openssl/err.h
-v3_int.o: ../../include/openssl/evp.h ../../include/openssl/lhash.h
-v3_int.o: ../../include/openssl/obj_mac.h ../../include/openssl/objects.h
-v3_int.o: ../../include/openssl/opensslconf.h ../../include/openssl/opensslv.h
-v3_int.o: ../../include/openssl/ossl_typ.h ../../include/openssl/pkcs7.h
-v3_int.o: ../../include/openssl/safestack.h ../../include/openssl/sha.h
-v3_int.o: ../../include/openssl/stack.h ../../include/openssl/symhacks.h
-v3_int.o: ../../include/openssl/x509.h ../../include/openssl/x509_vfy.h
-v3_int.o: ../../include/openssl/x509v3.h ../cryptlib.h v3_int.c
-v3_lib.o: ../../e_os.h ../../include/openssl/asn1.h ../../include/openssl/bio.h
-v3_lib.o: ../../include/openssl/buffer.h ../../include/openssl/conf.h
-v3_lib.o: ../../include/openssl/crypto.h ../../include/openssl/e_os2.h
-v3_lib.o: ../../include/openssl/ec.h ../../include/openssl/ecdh.h
-v3_lib.o: ../../include/openssl/ecdsa.h ../../include/openssl/err.h
-v3_lib.o: ../../include/openssl/evp.h ../../include/openssl/lhash.h
-v3_lib.o: ../../include/openssl/obj_mac.h ../../include/openssl/objects.h
-v3_lib.o: ../../include/openssl/opensslconf.h ../../include/openssl/opensslv.h
-v3_lib.o: ../../include/openssl/ossl_typ.h ../../include/openssl/pkcs7.h
-v3_lib.o: ../../include/openssl/safestack.h ../../include/openssl/sha.h
-v3_lib.o: ../../include/openssl/stack.h ../../include/openssl/symhacks.h
-v3_lib.o: ../../include/openssl/x509.h ../../include/openssl/x509_vfy.h
-v3_lib.o: ../../include/openssl/x509v3.h ../cryptlib.h ext_dat.h v3_lib.c
-v3_ncons.o: ../../e_os.h ../../include/openssl/asn1.h
-v3_ncons.o: ../../include/openssl/asn1t.h ../../include/openssl/bio.h
-v3_ncons.o: ../../include/openssl/buffer.h ../../include/openssl/conf.h
-v3_ncons.o: ../../include/openssl/crypto.h ../../include/openssl/e_os2.h
-v3_ncons.o: ../../include/openssl/ec.h ../../include/openssl/ecdh.h
-v3_ncons.o: ../../include/openssl/ecdsa.h ../../include/openssl/err.h
-v3_ncons.o: ../../include/openssl/evp.h ../../include/openssl/lhash.h
-v3_ncons.o: ../../include/openssl/obj_mac.h ../../include/openssl/objects.h
-v3_ncons.o: ../../include/openssl/opensslconf.h
-v3_ncons.o: ../../include/openssl/opensslv.h ../../include/openssl/ossl_typ.h
-v3_ncons.o: ../../include/openssl/pkcs7.h ../../include/openssl/safestack.h
-v3_ncons.o: ../../include/openssl/sha.h ../../include/openssl/stack.h
-v3_ncons.o: ../../include/openssl/symhacks.h ../../include/openssl/x509.h
-v3_ncons.o: ../../include/openssl/x509_vfy.h ../../include/openssl/x509v3.h
-v3_ncons.o: ../cryptlib.h v3_ncons.c
-v3_ocsp.o: ../../e_os.h ../../include/openssl/asn1.h
-v3_ocsp.o: ../../include/openssl/bio.h ../../include/openssl/buffer.h
-v3_ocsp.o: ../../include/openssl/conf.h ../../include/openssl/crypto.h
-v3_ocsp.o: ../../include/openssl/e_os2.h ../../include/openssl/ec.h
-v3_ocsp.o: ../../include/openssl/ecdh.h ../../include/openssl/ecdsa.h
-v3_ocsp.o: ../../include/openssl/err.h ../../include/openssl/evp.h
-v3_ocsp.o: ../../include/openssl/lhash.h ../../include/openssl/obj_mac.h
-v3_ocsp.o: ../../include/openssl/objects.h ../../include/openssl/ocsp.h
-v3_ocsp.o: ../../include/openssl/opensslconf.h ../../include/openssl/opensslv.h
-v3_ocsp.o: ../../include/openssl/ossl_typ.h ../../include/openssl/pkcs7.h
-v3_ocsp.o: ../../include/openssl/safestack.h ../../include/openssl/sha.h
-v3_ocsp.o: ../../include/openssl/stack.h ../../include/openssl/symhacks.h
-v3_ocsp.o: ../../include/openssl/x509.h ../../include/openssl/x509_vfy.h
-v3_ocsp.o: ../../include/openssl/x509v3.h ../cryptlib.h v3_ocsp.c
-v3_pci.o: ../../e_os.h ../../include/openssl/asn1.h ../../include/openssl/bio.h
-v3_pci.o: ../../include/openssl/buffer.h ../../include/openssl/conf.h
-v3_pci.o: ../../include/openssl/crypto.h ../../include/openssl/e_os2.h
-v3_pci.o: ../../include/openssl/ec.h ../../include/openssl/ecdh.h
-v3_pci.o: ../../include/openssl/ecdsa.h ../../include/openssl/err.h
-v3_pci.o: ../../include/openssl/evp.h ../../include/openssl/lhash.h
-v3_pci.o: ../../include/openssl/obj_mac.h ../../include/openssl/objects.h
-v3_pci.o: ../../include/openssl/opensslconf.h ../../include/openssl/opensslv.h
-v3_pci.o: ../../include/openssl/ossl_typ.h ../../include/openssl/pkcs7.h
-v3_pci.o: ../../include/openssl/safestack.h ../../include/openssl/sha.h
-v3_pci.o: ../../include/openssl/stack.h ../../include/openssl/symhacks.h
-v3_pci.o: ../../include/openssl/x509.h ../../include/openssl/x509_vfy.h
-v3_pci.o: ../../include/openssl/x509v3.h ../cryptlib.h v3_pci.c
-v3_pcia.o: ../../include/openssl/asn1.h ../../include/openssl/asn1t.h
-v3_pcia.o: ../../include/openssl/bio.h ../../include/openssl/buffer.h
-v3_pcia.o: ../../include/openssl/conf.h ../../include/openssl/crypto.h
-v3_pcia.o: ../../include/openssl/e_os2.h ../../include/openssl/ec.h
-v3_pcia.o: ../../include/openssl/ecdh.h ../../include/openssl/ecdsa.h
-v3_pcia.o: ../../include/openssl/evp.h ../../include/openssl/lhash.h
-v3_pcia.o: ../../include/openssl/obj_mac.h ../../include/openssl/objects.h
-v3_pcia.o: ../../include/openssl/opensslconf.h ../../include/openssl/opensslv.h
-v3_pcia.o: ../../include/openssl/ossl_typ.h ../../include/openssl/pkcs7.h
-v3_pcia.o: ../../include/openssl/safestack.h ../../include/openssl/sha.h
-v3_pcia.o: ../../include/openssl/stack.h ../../include/openssl/symhacks.h
-v3_pcia.o: ../../include/openssl/x509.h ../../include/openssl/x509_vfy.h
-v3_pcia.o: ../../include/openssl/x509v3.h v3_pcia.c
-v3_pcons.o: ../../e_os.h ../../include/openssl/asn1.h
-v3_pcons.o: ../../include/openssl/asn1t.h ../../include/openssl/bio.h
-v3_pcons.o: ../../include/openssl/buffer.h ../../include/openssl/conf.h
-v3_pcons.o: ../../include/openssl/crypto.h ../../include/openssl/e_os2.h
-v3_pcons.o: ../../include/openssl/ec.h ../../include/openssl/ecdh.h
-v3_pcons.o: ../../include/openssl/ecdsa.h ../../include/openssl/err.h
-v3_pcons.o: ../../include/openssl/evp.h ../../include/openssl/lhash.h
-v3_pcons.o: ../../include/openssl/obj_mac.h ../../include/openssl/objects.h
-v3_pcons.o: ../../include/openssl/opensslconf.h
-v3_pcons.o: ../../include/openssl/opensslv.h ../../include/openssl/ossl_typ.h
-v3_pcons.o: ../../include/openssl/pkcs7.h ../../include/openssl/safestack.h
-v3_pcons.o: ../../include/openssl/sha.h ../../include/openssl/stack.h
-v3_pcons.o: ../../include/openssl/symhacks.h ../../include/openssl/x509.h
-v3_pcons.o: ../../include/openssl/x509_vfy.h ../../include/openssl/x509v3.h
-v3_pcons.o: ../cryptlib.h v3_pcons.c
-v3_pku.o: ../../e_os.h ../../include/openssl/asn1.h
-v3_pku.o: ../../include/openssl/asn1t.h ../../include/openssl/bio.h
-v3_pku.o: ../../include/openssl/buffer.h ../../include/openssl/conf.h
-v3_pku.o: ../../include/openssl/crypto.h ../../include/openssl/e_os2.h
-v3_pku.o: ../../include/openssl/ec.h ../../include/openssl/ecdh.h
-v3_pku.o: ../../include/openssl/ecdsa.h ../../include/openssl/err.h
-v3_pku.o: ../../include/openssl/evp.h ../../include/openssl/lhash.h
-v3_pku.o: ../../include/openssl/obj_mac.h ../../include/openssl/objects.h
-v3_pku.o: ../../include/openssl/opensslconf.h ../../include/openssl/opensslv.h
-v3_pku.o: ../../include/openssl/ossl_typ.h ../../include/openssl/pkcs7.h
-v3_pku.o: ../../include/openssl/safestack.h ../../include/openssl/sha.h
-v3_pku.o: ../../include/openssl/stack.h ../../include/openssl/symhacks.h
-v3_pku.o: ../../include/openssl/x509.h ../../include/openssl/x509_vfy.h
-v3_pku.o: ../../include/openssl/x509v3.h ../cryptlib.h v3_pku.c
-v3_pmaps.o: ../../e_os.h ../../include/openssl/asn1.h
-v3_pmaps.o: ../../include/openssl/asn1t.h ../../include/openssl/bio.h
-v3_pmaps.o: ../../include/openssl/buffer.h ../../include/openssl/conf.h
-v3_pmaps.o: ../../include/openssl/crypto.h ../../include/openssl/e_os2.h
-v3_pmaps.o: ../../include/openssl/ec.h ../../include/openssl/ecdh.h
-v3_pmaps.o: ../../include/openssl/ecdsa.h ../../include/openssl/err.h
-v3_pmaps.o: ../../include/openssl/evp.h ../../include/openssl/lhash.h
-v3_pmaps.o: ../../include/openssl/obj_mac.h ../../include/openssl/objects.h
-v3_pmaps.o: ../../include/openssl/opensslconf.h
-v3_pmaps.o: ../../include/openssl/opensslv.h ../../include/openssl/ossl_typ.h
-v3_pmaps.o: ../../include/openssl/pkcs7.h ../../include/openssl/safestack.h
-v3_pmaps.o: ../../include/openssl/sha.h ../../include/openssl/stack.h
-v3_pmaps.o: ../../include/openssl/symhacks.h ../../include/openssl/x509.h
-v3_pmaps.o: ../../include/openssl/x509_vfy.h ../../include/openssl/x509v3.h
-v3_pmaps.o: ../cryptlib.h v3_pmaps.c
-v3_prn.o: ../../e_os.h ../../include/openssl/asn1.h ../../include/openssl/bio.h
-v3_prn.o: ../../include/openssl/buffer.h ../../include/openssl/conf.h
-v3_prn.o: ../../include/openssl/crypto.h ../../include/openssl/e_os2.h
-v3_prn.o: ../../include/openssl/ec.h ../../include/openssl/ecdh.h
-v3_prn.o: ../../include/openssl/ecdsa.h ../../include/openssl/err.h
-v3_prn.o: ../../include/openssl/evp.h ../../include/openssl/lhash.h
-v3_prn.o: ../../include/openssl/obj_mac.h ../../include/openssl/objects.h
-v3_prn.o: ../../include/openssl/opensslconf.h ../../include/openssl/opensslv.h
-v3_prn.o: ../../include/openssl/ossl_typ.h ../../include/openssl/pkcs7.h
-v3_prn.o: ../../include/openssl/safestack.h ../../include/openssl/sha.h
-v3_prn.o: ../../include/openssl/stack.h ../../include/openssl/symhacks.h
-v3_prn.o: ../../include/openssl/x509.h ../../include/openssl/x509_vfy.h
-v3_prn.o: ../../include/openssl/x509v3.h ../cryptlib.h v3_prn.c
-v3_purp.o: ../../e_os.h ../../include/openssl/asn1.h
-v3_purp.o: ../../include/openssl/bio.h ../../include/openssl/buffer.h
-v3_purp.o: ../../include/openssl/conf.h ../../include/openssl/crypto.h
-v3_purp.o: ../../include/openssl/e_os2.h ../../include/openssl/ec.h
-v3_purp.o: ../../include/openssl/ecdh.h ../../include/openssl/ecdsa.h
-v3_purp.o: ../../include/openssl/err.h ../../include/openssl/evp.h
-v3_purp.o: ../../include/openssl/lhash.h ../../include/openssl/obj_mac.h
-v3_purp.o: ../../include/openssl/objects.h ../../include/openssl/opensslconf.h
-v3_purp.o: ../../include/openssl/opensslv.h ../../include/openssl/ossl_typ.h
-v3_purp.o: ../../include/openssl/pkcs7.h ../../include/openssl/safestack.h
-v3_purp.o: ../../include/openssl/sha.h ../../include/openssl/stack.h
-v3_purp.o: ../../include/openssl/symhacks.h ../../include/openssl/x509.h
-v3_purp.o: ../../include/openssl/x509_vfy.h ../../include/openssl/x509v3.h
-v3_purp.o: ../cryptlib.h v3_purp.c
-v3_skey.o: ../../e_os.h ../../include/openssl/asn1.h
-v3_skey.o: ../../include/openssl/bio.h ../../include/openssl/buffer.h
-v3_skey.o: ../../include/openssl/conf.h ../../include/openssl/crypto.h
-v3_skey.o: ../../include/openssl/e_os2.h ../../include/openssl/ec.h
-v3_skey.o: ../../include/openssl/ecdh.h ../../include/openssl/ecdsa.h
-v3_skey.o: ../../include/openssl/err.h ../../include/openssl/evp.h
-v3_skey.o: ../../include/openssl/lhash.h ../../include/openssl/obj_mac.h
-v3_skey.o: ../../include/openssl/objects.h ../../include/openssl/opensslconf.h
-v3_skey.o: ../../include/openssl/opensslv.h ../../include/openssl/ossl_typ.h
-v3_skey.o: ../../include/openssl/pkcs7.h ../../include/openssl/safestack.h
-v3_skey.o: ../../include/openssl/sha.h ../../include/openssl/stack.h
-v3_skey.o: ../../include/openssl/symhacks.h ../../include/openssl/x509.h
-v3_skey.o: ../../include/openssl/x509_vfy.h ../../include/openssl/x509v3.h
-v3_skey.o: ../cryptlib.h v3_skey.c
-v3_sxnet.o: ../../e_os.h ../../include/openssl/asn1.h
-v3_sxnet.o: ../../include/openssl/asn1t.h ../../include/openssl/bio.h
-v3_sxnet.o: ../../include/openssl/buffer.h ../../include/openssl/conf.h
-v3_sxnet.o: ../../include/openssl/crypto.h ../../include/openssl/e_os2.h
-v3_sxnet.o: ../../include/openssl/ec.h ../../include/openssl/ecdh.h
-v3_sxnet.o: ../../include/openssl/ecdsa.h ../../include/openssl/err.h
-v3_sxnet.o: ../../include/openssl/evp.h ../../include/openssl/lhash.h
-v3_sxnet.o: ../../include/openssl/obj_mac.h ../../include/openssl/objects.h
-v3_sxnet.o: ../../include/openssl/opensslconf.h
-v3_sxnet.o: ../../include/openssl/opensslv.h ../../include/openssl/ossl_typ.h
-v3_sxnet.o: ../../include/openssl/pkcs7.h ../../include/openssl/safestack.h
-v3_sxnet.o: ../../include/openssl/sha.h ../../include/openssl/stack.h
-v3_sxnet.o: ../../include/openssl/symhacks.h ../../include/openssl/x509.h
-v3_sxnet.o: ../../include/openssl/x509_vfy.h ../../include/openssl/x509v3.h
-v3_sxnet.o: ../cryptlib.h v3_sxnet.c
-v3_utl.o: ../../e_os.h ../../include/openssl/asn1.h ../../include/openssl/bio.h
-v3_utl.o: ../../include/openssl/bn.h ../../include/openssl/buffer.h
-v3_utl.o: ../../include/openssl/conf.h ../../include/openssl/crypto.h
-v3_utl.o: ../../include/openssl/e_os2.h ../../include/openssl/ec.h
-v3_utl.o: ../../include/openssl/ecdh.h ../../include/openssl/ecdsa.h
-v3_utl.o: ../../include/openssl/err.h ../../include/openssl/evp.h
-v3_utl.o: ../../include/openssl/lhash.h ../../include/openssl/obj_mac.h
-v3_utl.o: ../../include/openssl/objects.h ../../include/openssl/opensslconf.h
-v3_utl.o: ../../include/openssl/opensslv.h ../../include/openssl/ossl_typ.h
-v3_utl.o: ../../include/openssl/pkcs7.h ../../include/openssl/safestack.h
-v3_utl.o: ../../include/openssl/sha.h ../../include/openssl/stack.h
-v3_utl.o: ../../include/openssl/symhacks.h ../../include/openssl/x509.h
-v3_utl.o: ../../include/openssl/x509_vfy.h ../../include/openssl/x509v3.h
-v3_utl.o: ../cryptlib.h v3_utl.c
-v3err.o: ../../include/openssl/asn1.h ../../include/openssl/bio.h
-v3err.o: ../../include/openssl/buffer.h ../../include/openssl/conf.h
-v3err.o: ../../include/openssl/crypto.h ../../include/openssl/e_os2.h
-v3err.o: ../../include/openssl/ec.h ../../include/openssl/ecdh.h
-v3err.o: ../../include/openssl/ecdsa.h ../../include/openssl/err.h
-v3err.o: ../../include/openssl/evp.h ../../include/openssl/lhash.h
-v3err.o: ../../include/openssl/obj_mac.h ../../include/openssl/objects.h
-v3err.o: ../../include/openssl/opensslconf.h ../../include/openssl/opensslv.h
-v3err.o: ../../include/openssl/ossl_typ.h ../../include/openssl/pkcs7.h
-v3err.o: ../../include/openssl/safestack.h ../../include/openssl/sha.h
-v3err.o: ../../include/openssl/stack.h ../../include/openssl/symhacks.h
-v3err.o: ../../include/openssl/x509.h ../../include/openssl/x509_vfy.h
-v3err.o: ../../include/openssl/x509v3.h v3err.c
diff --git a/crypto/openssl/crypto/x509v3/ext_dat.h b/crypto/openssl/crypto/x509v3/ext_dat.h
deleted file mode 100644
index 5c063ac65dfb..000000000000
--- a/crypto/openssl/crypto/x509v3/ext_dat.h
+++ /dev/null
@@ -1,131 +0,0 @@
-/* ext_dat.h */
-/* Written by Dr Stephen N Henson (shenson@bigfoot.com) for the OpenSSL
- * project 1999.
- */
-/* ====================================================================
- * Copyright (c) 1999-2004 The OpenSSL Project.  All rights reserved.
- *
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions
- * are met:
- *
- * 1. Redistributions of source code must retain the above copyright
- *    notice, this list of conditions and the following disclaimer. 
- *
- * 2. Redistributions in binary form must reproduce the above copyright
- *    notice, this list of conditions and the following disclaimer in
- *    the documentation and/or other materials provided with the
- *    distribution.
- *
- * 3. All advertising materials mentioning features or use of this
- *    software must display the following acknowledgment:
- *    "This product includes software developed by the OpenSSL Project
- *    for use in the OpenSSL Toolkit. (http://www.OpenSSL.org/)"
- *
- * 4. The names "OpenSSL Toolkit" and "OpenSSL Project" must not be used to
- *    endorse or promote products derived from this software without
- *    prior written permission. For written permission, please contact
- *    licensing@OpenSSL.org.
- *
- * 5. Products derived from this software may not be called "OpenSSL"
- *    nor may "OpenSSL" appear in their names without prior written
- *    permission of the OpenSSL Project.
- *
- * 6. Redistributions of any form whatsoever must retain the following
- *    acknowledgment:
- *    "This product includes software developed by the OpenSSL Project
- *    for use in the OpenSSL Toolkit (http://www.OpenSSL.org/)"
- *
- * THIS SOFTWARE IS PROVIDED BY THE OpenSSL PROJECT ``AS IS'' AND ANY
- * EXPRESSED OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
- * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR
- * PURPOSE ARE DISCLAIMED.  IN NO EVENT SHALL THE OpenSSL PROJECT OR
- * ITS CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
- * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
- * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
- * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
- * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
- * STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
- * ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED
- * OF THE POSSIBILITY OF SUCH DAMAGE.
- * ====================================================================
- *
- * This product includes cryptographic software written by Eric Young
- * (eay@cryptsoft.com).  This product includes software written by Tim
- * Hudson (tjh@cryptsoft.com).
- *
- */
-/* This file contains a table of "standard" extensions */
-
-extern X509V3_EXT_METHOD v3_bcons, v3_nscert, v3_key_usage, v3_ext_ku;
-extern X509V3_EXT_METHOD v3_pkey_usage_period, v3_sxnet, v3_info, v3_sinfo;
-extern X509V3_EXT_METHOD v3_ns_ia5_list[], v3_alt[], v3_skey_id, v3_akey_id;
-extern X509V3_EXT_METHOD v3_crl_num, v3_crl_reason, v3_crl_invdate;
-extern X509V3_EXT_METHOD v3_delta_crl, v3_cpols, v3_crld;
-extern X509V3_EXT_METHOD v3_ocsp_nonce, v3_ocsp_accresp, v3_ocsp_acutoff;
-extern X509V3_EXT_METHOD v3_ocsp_crlid, v3_ocsp_nocheck, v3_ocsp_serviceloc;
-extern X509V3_EXT_METHOD v3_crl_hold, v3_pci;
-extern X509V3_EXT_METHOD v3_policy_mappings, v3_policy_constraints;
-extern X509V3_EXT_METHOD v3_name_constraints, v3_inhibit_anyp;
-#ifndef OPENSSL_NO_RFC3779
-extern X509V3_EXT_METHOD v3_addr, v3_asid;
-#endif
-
-/* This table will be searched using OBJ_bsearch so it *must* kept in
- * order of the ext_nid values.
- */
-
-static X509V3_EXT_METHOD *standard_exts[] = {
-&v3_nscert,
-&v3_ns_ia5_list[0],
-&v3_ns_ia5_list[1],
-&v3_ns_ia5_list[2],
-&v3_ns_ia5_list[3],
-&v3_ns_ia5_list[4],
-&v3_ns_ia5_list[5],
-&v3_ns_ia5_list[6],
-&v3_skey_id,
-&v3_key_usage,
-&v3_pkey_usage_period,
-&v3_alt[0],
-&v3_alt[1],
-&v3_bcons,
-&v3_crl_num,
-&v3_cpols,
-&v3_akey_id,
-&v3_crld,
-&v3_ext_ku,
-&v3_delta_crl,
-&v3_crl_reason,
-#ifndef OPENSSL_NO_OCSP
-&v3_crl_invdate,
-#endif
-&v3_sxnet,
-&v3_info,
-#ifndef OPENSSL_NO_RFC3779
-&v3_addr,
-&v3_asid,
-#endif
-#ifndef OPENSSL_NO_OCSP
-&v3_ocsp_nonce,
-&v3_ocsp_crlid,
-&v3_ocsp_accresp,
-&v3_ocsp_nocheck,
-&v3_ocsp_acutoff,
-&v3_ocsp_serviceloc,
-#endif
-&v3_sinfo,
-&v3_policy_constraints,
-#ifndef OPENSSL_NO_OCSP
-&v3_crl_hold,
-#endif
-&v3_pci,
-&v3_name_constraints,
-&v3_policy_mappings,
-&v3_inhibit_anyp
-};
-
-/* Number of standard extensions */
-
-#define STANDARD_EXTENSION_COUNT (sizeof(standard_exts)/sizeof(X509V3_EXT_METHOD *))
-
diff --git a/crypto/openssl/crypto/x509v3/pcy_cache.c b/crypto/openssl/crypto/x509v3/pcy_cache.c
deleted file mode 100644
index c18beb89f583..000000000000
--- a/crypto/openssl/crypto/x509v3/pcy_cache.c
+++ /dev/null
@@ -1,287 +0,0 @@
-/* pcy_cache.c */
-/* Written by Dr Stephen N Henson (shenson@bigfoot.com) for the OpenSSL
- * project 2004.
- */
-/* ====================================================================
- * Copyright (c) 2004 The OpenSSL Project.  All rights reserved.
- *
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions
- * are met:
- *
- * 1. Redistributions of source code must retain the above copyright
- *    notice, this list of conditions and the following disclaimer. 
- *
- * 2. Redistributions in binary form must reproduce the above copyright
- *    notice, this list of conditions and the following disclaimer in
- *    the documentation and/or other materials provided with the
- *    distribution.
- *
- * 3. All advertising materials mentioning features or use of this
- *    software must display the following acknowledgment:
- *    "This product includes software developed by the OpenSSL Project
- *    for use in the OpenSSL Toolkit. (http://www.OpenSSL.org/)"
- *
- * 4. The names "OpenSSL Toolkit" and "OpenSSL Project" must not be used to
- *    endorse or promote products derived from this software without
- *    prior written permission. For written permission, please contact
- *    licensing@OpenSSL.org.
- *
- * 5. Products derived from this software may not be called "OpenSSL"
- *    nor may "OpenSSL" appear in their names without prior written
- *    permission of the OpenSSL Project.
- *
- * 6. Redistributions of any form whatsoever must retain the following
- *    acknowledgment:
- *    "This product includes software developed by the OpenSSL Project
- *    for use in the OpenSSL Toolkit (http://www.OpenSSL.org/)"
- *
- * THIS SOFTWARE IS PROVIDED BY THE OpenSSL PROJECT ``AS IS'' AND ANY
- * EXPRESSED OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
- * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR
- * PURPOSE ARE DISCLAIMED.  IN NO EVENT SHALL THE OpenSSL PROJECT OR
- * ITS CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
- * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
- * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
- * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
- * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
- * STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
- * ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED
- * OF THE POSSIBILITY OF SUCH DAMAGE.
- * ====================================================================
- *
- * This product includes cryptographic software written by Eric Young
- * (eay@cryptsoft.com).  This product includes software written by Tim
- * Hudson (tjh@cryptsoft.com).
- *
- */
-
-#include "cryptlib.h"
-#include <openssl/x509.h>
-#include <openssl/x509v3.h>
-
-#include "pcy_int.h"
-
-static int policy_data_cmp(const X509_POLICY_DATA * const *a,
-				const X509_POLICY_DATA * const *b);
-static int policy_cache_set_int(long *out, ASN1_INTEGER *value);
-
-/* Set cache entry according to CertificatePolicies extension.
- * Note: this destroys the passed CERTIFICATEPOLICIES structure.
- */
-
-static int policy_cache_create(X509 *x,
-			CERTIFICATEPOLICIES *policies, int crit)
-	{
-	int i;
-	int ret = 0;
-	X509_POLICY_CACHE *cache = x->policy_cache;
-	X509_POLICY_DATA *data = NULL;
-	POLICYINFO *policy;
-	if (sk_POLICYINFO_num(policies) == 0)
-		goto bad_policy;
-	cache->data = sk_X509_POLICY_DATA_new(policy_data_cmp);
-	if (!cache->data)
-		goto bad_policy;
-	for (i = 0; i < sk_POLICYINFO_num(policies); i++)
-		{
-		policy = sk_POLICYINFO_value(policies, i);
-		data = policy_data_new(policy, NULL, crit);
-		if (!data)
-			goto bad_policy;
-		/* Duplicate policy OIDs are illegal: reject if matches
-		 * found.
-		 */
-		if (OBJ_obj2nid(data->valid_policy) == NID_any_policy)
-			{
-			if (cache->anyPolicy)
-				{
-				ret = -1;
-				goto bad_policy;
-				}
-			cache->anyPolicy = data;
-			}
-		else if (sk_X509_POLICY_DATA_find(cache->data, data) != -1)
-			{
-			ret = -1;
-			goto bad_policy;
-			}
-		else if (!sk_X509_POLICY_DATA_push(cache->data, data))
-			goto bad_policy;
-		data = NULL;
-		}
-	ret = 1;
-	bad_policy:
-	if (ret == -1)
-		x->ex_flags |= EXFLAG_INVALID_POLICY;
-	if (data)
-		policy_data_free(data);
-	sk_POLICYINFO_pop_free(policies, POLICYINFO_free);
-	if (ret <= 0)
-		{
-		sk_X509_POLICY_DATA_pop_free(cache->data, policy_data_free);
-		cache->data = NULL;
-		}
-	return ret;
-	}
-
-	
-static int policy_cache_new(X509 *x)
-	{
-	X509_POLICY_CACHE *cache;
-	ASN1_INTEGER *ext_any = NULL;
-	POLICY_CONSTRAINTS *ext_pcons = NULL;
-	CERTIFICATEPOLICIES *ext_cpols = NULL;
-	POLICY_MAPPINGS *ext_pmaps = NULL;
-	int i;
-	cache = OPENSSL_malloc(sizeof(X509_POLICY_CACHE));
-	if (!cache)
-		return 0;
-	cache->anyPolicy = NULL;
-	cache->data = NULL;
-	cache->maps = NULL;
-	cache->any_skip = -1;
-	cache->explicit_skip = -1;
-	cache->map_skip = -1;
-
-	x->policy_cache = cache;
-
-	/* Handle requireExplicitPolicy *first*. Need to process this
-	 * even if we don't have any policies.
-	 */
-	ext_pcons = X509_get_ext_d2i(x, NID_policy_constraints, &i, NULL);
-
-	if (!ext_pcons)
-		{
-		if (i != -1)
-			goto bad_cache;
-		}
-	else
-		{
-		if (!ext_pcons->requireExplicitPolicy
-			&& !ext_pcons->inhibitPolicyMapping)
-			goto bad_cache;
-		if (!policy_cache_set_int(&cache->explicit_skip,
-			ext_pcons->requireExplicitPolicy))
-			goto bad_cache;
-		if (!policy_cache_set_int(&cache->map_skip,
-			ext_pcons->inhibitPolicyMapping))
-			goto bad_cache;
-		}
-
-	/* Process CertificatePolicies */
-
-	ext_cpols = X509_get_ext_d2i(x, NID_certificate_policies, &i, NULL);
-	/* If no CertificatePolicies extension or problem decoding then
-	 * there is no point continuing because the valid policies will be
-	 * NULL.
-	 */
-	if (!ext_cpols)
-		{
-		/* If not absent some problem with extension */
-		if (i != -1)
-			goto bad_cache;
-		return 1;
-		}
-
-	i = policy_cache_create(x, ext_cpols, i);
-
-	/* NB: ext_cpols freed by policy_cache_set_policies */
-
-	if (i <= 0)
-		return i;
-
-	ext_pmaps = X509_get_ext_d2i(x, NID_policy_mappings, &i, NULL);
-
-	if (!ext_pmaps)
-		{
-		/* If not absent some problem with extension */
-		if (i != -1)
-			goto bad_cache;
-		}
-	else
-		{
-		i = policy_cache_set_mapping(x, ext_pmaps);
-		if (i <= 0)
-			goto bad_cache;
-		}
-
-	ext_any = X509_get_ext_d2i(x, NID_inhibit_any_policy, &i, NULL);
-
-	if (!ext_any)
-		{
-		if (i != -1)
-			goto bad_cache;
-		}
-	else if (!policy_cache_set_int(&cache->any_skip, ext_any))
-			goto bad_cache;
-
-	if (0)
-		{
-		bad_cache:
-		x->ex_flags |= EXFLAG_INVALID_POLICY;
-		}
-
-	if(ext_pcons)
-		POLICY_CONSTRAINTS_free(ext_pcons);
-
-	if (ext_any)
-		ASN1_INTEGER_free(ext_any);
-
-	return 1;
-
-	
-}
-
-void policy_cache_free(X509_POLICY_CACHE *cache)
-	{
-	if (!cache)
-		return;
-	if (cache->anyPolicy)
-		policy_data_free(cache->anyPolicy);
-	if (cache->data)
-		sk_X509_POLICY_DATA_pop_free(cache->data, policy_data_free);
-	OPENSSL_free(cache);
-	}
-
-const X509_POLICY_CACHE *policy_cache_set(X509 *x)
-	{
-
-	if (x->policy_cache == NULL)
-		{
-		CRYPTO_w_lock(CRYPTO_LOCK_X509);
-			policy_cache_new(x);
-		CRYPTO_w_unlock(CRYPTO_LOCK_X509);
-		}
-
-	return x->policy_cache;
-
-	}
-
-X509_POLICY_DATA *policy_cache_find_data(const X509_POLICY_CACHE *cache,
-						const ASN1_OBJECT *id)
-	{
-	int idx;
-	X509_POLICY_DATA tmp;
-	tmp.valid_policy = (ASN1_OBJECT *)id;
-	idx = sk_X509_POLICY_DATA_find(cache->data, &tmp);
-	if (idx == -1)
-		return NULL;
-	return sk_X509_POLICY_DATA_value(cache->data, idx);
-	}
-
-static int policy_data_cmp(const X509_POLICY_DATA * const *a,
-				const X509_POLICY_DATA * const *b)
-	{
-	return OBJ_cmp((*a)->valid_policy, (*b)->valid_policy);
-	}
-
-static int policy_cache_set_int(long *out, ASN1_INTEGER *value)
-	{
-	if (value == NULL)
-		return 1;
-	if (value->type == V_ASN1_NEG_INTEGER)
-		return 0;
-	*out = ASN1_INTEGER_get(value);
-	return 1;
-	}
diff --git a/crypto/openssl/crypto/x509v3/pcy_data.c b/crypto/openssl/crypto/x509v3/pcy_data.c
deleted file mode 100644
index 614d2b493550..000000000000
--- a/crypto/openssl/crypto/x509v3/pcy_data.c
+++ /dev/null
@@ -1,123 +0,0 @@
-/* pcy_data.c */
-/* Written by Dr Stephen N Henson (shenson@bigfoot.com) for the OpenSSL
- * project 2004.
- */
-/* ====================================================================
- * Copyright (c) 2004 The OpenSSL Project.  All rights reserved.
- *
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions
- * are met:
- *
- * 1. Redistributions of source code must retain the above copyright
- *    notice, this list of conditions and the following disclaimer. 
- *
- * 2. Redistributions in binary form must reproduce the above copyright
- *    notice, this list of conditions and the following disclaimer in
- *    the documentation and/or other materials provided with the
- *    distribution.
- *
- * 3. All advertising materials mentioning features or use of this
- *    software must display the following acknowledgment:
- *    "This product includes software developed by the OpenSSL Project
- *    for use in the OpenSSL Toolkit. (http://www.OpenSSL.org/)"
- *
- * 4. The names "OpenSSL Toolkit" and "OpenSSL Project" must not be used to
- *    endorse or promote products derived from this software without
- *    prior written permission. For written permission, please contact
- *    licensing@OpenSSL.org.
- *
- * 5. Products derived from this software may not be called "OpenSSL"
- *    nor may "OpenSSL" appear in their names without prior written
- *    permission of the OpenSSL Project.
- *
- * 6. Redistributions of any form whatsoever must retain the following
- *    acknowledgment:
- *    "This product includes software developed by the OpenSSL Project
- *    for use in the OpenSSL Toolkit (http://www.OpenSSL.org/)"
- *
- * THIS SOFTWARE IS PROVIDED BY THE OpenSSL PROJECT ``AS IS'' AND ANY
- * EXPRESSED OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
- * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR
- * PURPOSE ARE DISCLAIMED.  IN NO EVENT SHALL THE OpenSSL PROJECT OR
- * ITS CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
- * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
- * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
- * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
- * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
- * STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
- * ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED
- * OF THE POSSIBILITY OF SUCH DAMAGE.
- * ====================================================================
- *
- * This product includes cryptographic software written by Eric Young
- * (eay@cryptsoft.com).  This product includes software written by Tim
- * Hudson (tjh@cryptsoft.com).
- *
- */
-
-#include "cryptlib.h"
-#include <openssl/x509.h>
-#include <openssl/x509v3.h>
-
-#include "pcy_int.h"
-
-/* Policy Node routines */
-
-void policy_data_free(X509_POLICY_DATA *data)
-	{
-	ASN1_OBJECT_free(data->valid_policy);
-	/* Don't free qualifiers if shared */
-	if (!(data->flags & POLICY_DATA_FLAG_SHARED_QUALIFIERS))
-		sk_POLICYQUALINFO_pop_free(data->qualifier_set,
-					POLICYQUALINFO_free);
-	sk_ASN1_OBJECT_pop_free(data->expected_policy_set, ASN1_OBJECT_free);
-	OPENSSL_free(data);
-	}
-
-/* Create a data based on an existing policy. If 'id' is NULL use the
- * oid in the policy, otherwise use 'id'. This behaviour covers the two
- * types of data in RFC3280: data with from a CertificatePolcies extension
- * and additional data with just the qualifiers of anyPolicy and ID from
- * another source.
- */
-
-X509_POLICY_DATA *policy_data_new(POLICYINFO *policy, ASN1_OBJECT *id, int crit)
-	{
-	X509_POLICY_DATA *ret;
-	if (!policy && !id)
-		return NULL;
-	ret = OPENSSL_malloc(sizeof(X509_POLICY_DATA));
-	if (!ret)
-		return NULL;
-	ret->expected_policy_set = sk_ASN1_OBJECT_new_null();
-	if (!ret->expected_policy_set)
-		{
-		OPENSSL_free(ret);
-		return NULL;
-		}
-
-	if (crit)
-		ret->flags = POLICY_DATA_FLAG_CRITICAL;
-	else
-		ret->flags = 0;
-
-	if (id)
-		ret->valid_policy = id;
-	else
-		{
-		ret->valid_policy = policy->policyid;
-		policy->policyid = NULL;
-		}
-
-	if (policy)
-		{
-		ret->qualifier_set = policy->qualifiers;
-		policy->qualifiers = NULL;
-		}
-	else
-		ret->qualifier_set = NULL;
-
-	return ret;
-	}
-
diff --git a/crypto/openssl/crypto/x509v3/pcy_int.h b/crypto/openssl/crypto/x509v3/pcy_int.h
deleted file mode 100644
index ba62a209dad8..000000000000
--- a/crypto/openssl/crypto/x509v3/pcy_int.h
+++ /dev/null
@@ -1,223 +0,0 @@
-/* pcy_int.h */
-/* Written by Dr Stephen N Henson (shenson@bigfoot.com) for the OpenSSL
- * project 2004.
- */
-/* ====================================================================
- * Copyright (c) 2004 The OpenSSL Project.  All rights reserved.
- *
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions
- * are met:
- *
- * 1. Redistributions of source code must retain the above copyright
- *    notice, this list of conditions and the following disclaimer. 
- *
- * 2. Redistributions in binary form must reproduce the above copyright
- *    notice, this list of conditions and the following disclaimer in
- *    the documentation and/or other materials provided with the
- *    distribution.
- *
- * 3. All advertising materials mentioning features or use of this
- *    software must display the following acknowledgment:
- *    "This product includes software developed by the OpenSSL Project
- *    for use in the OpenSSL Toolkit. (http://www.OpenSSL.org/)"
- *
- * 4. The names "OpenSSL Toolkit" and "OpenSSL Project" must not be used to
- *    endorse or promote products derived from this software without
- *    prior written permission. For written permission, please contact
- *    licensing@OpenSSL.org.
- *
- * 5. Products derived from this software may not be called "OpenSSL"
- *    nor may "OpenSSL" appear in their names without prior written
- *    permission of the OpenSSL Project.
- *
- * 6. Redistributions of any form whatsoever must retain the following
- *    acknowledgment:
- *    "This product includes software developed by the OpenSSL Project
- *    for use in the OpenSSL Toolkit (http://www.OpenSSL.org/)"
- *
- * THIS SOFTWARE IS PROVIDED BY THE OpenSSL PROJECT ``AS IS'' AND ANY
- * EXPRESSED OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
- * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR
- * PURPOSE ARE DISCLAIMED.  IN NO EVENT SHALL THE OpenSSL PROJECT OR
- * ITS CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
- * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
- * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
- * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
- * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
- * STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
- * ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED
- * OF THE POSSIBILITY OF SUCH DAMAGE.
- * ====================================================================
- *
- * This product includes cryptographic software written by Eric Young
- * (eay@cryptsoft.com).  This product includes software written by Tim
- * Hudson (tjh@cryptsoft.com).
- *
- */
-
-DECLARE_STACK_OF(X509_POLICY_DATA)
-DECLARE_STACK_OF(X509_POLICY_REF)
-DECLARE_STACK_OF(X509_POLICY_NODE)
-
-typedef struct X509_POLICY_DATA_st X509_POLICY_DATA;
-typedef struct X509_POLICY_REF_st X509_POLICY_REF;
-
-/* Internal structures */
-
-/* This structure and the field names correspond to the Policy 'node' of
- * RFC3280. NB this structure contains no pointers to parent or child
- * data: X509_POLICY_NODE contains that. This means that the main policy data
- * can be kept static and cached with the certificate.
- */
-
-struct X509_POLICY_DATA_st
-	{
-	unsigned int flags;
-	/* Policy OID and qualifiers for this data */
-	ASN1_OBJECT *valid_policy;
-	STACK_OF(POLICYQUALINFO) *qualifier_set;
-	STACK_OF(ASN1_OBJECT) *expected_policy_set;
-	};
-
-/* X509_POLICY_DATA flags values */
-
-/* This flag indicates the structure has been mapped using a policy mapping
- * extension. If policy mapping is not active its references get deleted. 
- */
-
-#define POLICY_DATA_FLAG_MAPPED			0x1
-
-/* This flag indicates the data doesn't correspond to a policy in Certificate
- * Policies: it has been mapped to any policy.
- */
-
-#define POLICY_DATA_FLAG_MAPPED_ANY		0x2
-
-/* AND with flags to see if any mapping has occurred */
-
-#define POLICY_DATA_FLAG_MAP_MASK		0x3
-
-/* qualifiers are shared and shouldn't be freed */
-
-#define POLICY_DATA_FLAG_SHARED_QUALIFIERS	0x4
-
-/* Parent node is an extra node and should be freed */
-
-#define POLICY_DATA_FLAG_EXTRA_NODE		0x8
-
-/* Corresponding CertificatePolicies is critical */
-
-#define POLICY_DATA_FLAG_CRITICAL		0x10
-
-/* This structure is an entry from a table of mapped policies which
- * cross reference the policy it refers to.
- */
-
-struct X509_POLICY_REF_st
-	{
-	ASN1_OBJECT *subjectDomainPolicy;
-	const X509_POLICY_DATA *data;
-	};
-
-/* This structure is cached with a certificate */
-
-struct X509_POLICY_CACHE_st {
-	/* anyPolicy data or NULL if no anyPolicy */
-	X509_POLICY_DATA *anyPolicy;
-	/* other policy data */
-	STACK_OF(X509_POLICY_DATA) *data;
-	/* If policyMappings extension present a table of mapped policies */
-	STACK_OF(X509_POLICY_REF) *maps;
-	/* If InhibitAnyPolicy present this is its value or -1 if absent. */
-	long any_skip;
-	/* If policyConstraints and requireExplicitPolicy present this is its
-	 * value or -1 if absent.
-	 */
-	long explicit_skip;
-	/* If policyConstraints and policyMapping present this is its
-	 * value or -1 if absent.
-         */
-	long map_skip;
-	};
-
-/*#define POLICY_CACHE_FLAG_CRITICAL		POLICY_DATA_FLAG_CRITICAL*/
-
-/* This structure represents the relationship between nodes */
-
-struct X509_POLICY_NODE_st
-	{
-	/* node data this refers to */
-	const X509_POLICY_DATA *data;
-	/* Parent node */
-	X509_POLICY_NODE *parent;
-	/* Number of child nodes */
-	int nchild;
-	};
-
-struct X509_POLICY_LEVEL_st
-	{
-	/* Cert for this level */
-	X509 *cert;
-	/* nodes at this level */
-	STACK_OF(X509_POLICY_NODE) *nodes;
-	/* anyPolicy node */
-	X509_POLICY_NODE *anyPolicy;
-	/* Extra data */
-	/*STACK_OF(X509_POLICY_DATA) *extra_data;*/
-	unsigned int flags;
-	};
-
-struct X509_POLICY_TREE_st
-	{
-	/* This is the tree 'level' data */
-	X509_POLICY_LEVEL *levels;
-	int nlevel;
-	/* Extra policy data when additional nodes (not from the certificate)
-	 * are required.
-	 */
-	STACK_OF(X509_POLICY_DATA) *extra_data;
-	/* This is the authority constained policy set */
-	STACK_OF(X509_POLICY_NODE) *auth_policies;
-	STACK_OF(X509_POLICY_NODE) *user_policies;
-	unsigned int flags;
-	};
-
-/* Set if anyPolicy present in user policies */
-#define POLICY_FLAG_ANY_POLICY		0x2
-
-/* Useful macros */
-
-#define node_data_critical(data) (data->flags & POLICY_DATA_FLAG_CRITICAL)
-#define node_critical(node) node_data_critical(node->data)
-
-/* Internal functions */
-
-X509_POLICY_DATA *policy_data_new(POLICYINFO *policy, ASN1_OBJECT *id,
-								int crit);
-void policy_data_free(X509_POLICY_DATA *data);
-
-X509_POLICY_DATA *policy_cache_find_data(const X509_POLICY_CACHE *cache,
-							const ASN1_OBJECT *id);
-int policy_cache_set_mapping(X509 *x, POLICY_MAPPINGS *maps);
-
-
-STACK_OF(X509_POLICY_NODE) *policy_node_cmp_new(void);
-
-void policy_cache_init(void);
-
-void policy_cache_free(X509_POLICY_CACHE *cache);
-
-X509_POLICY_NODE *level_find_node(const X509_POLICY_LEVEL *level,
-					const ASN1_OBJECT *id);
-
-X509_POLICY_NODE *tree_find_sk(STACK_OF(X509_POLICY_NODE) *sk,
-						const ASN1_OBJECT *id);
-
-X509_POLICY_NODE *level_add_node(X509_POLICY_LEVEL *level,
-			X509_POLICY_DATA *data,
-			X509_POLICY_NODE *parent,
-			X509_POLICY_TREE *tree);
-void policy_node_free(X509_POLICY_NODE *node);
-
-const X509_POLICY_CACHE *policy_cache_set(X509 *x);
diff --git a/crypto/openssl/crypto/x509v3/pcy_lib.c b/crypto/openssl/crypto/x509v3/pcy_lib.c
deleted file mode 100644
index dae4840bc5d4..000000000000
--- a/crypto/openssl/crypto/x509v3/pcy_lib.c
+++ /dev/null
@@ -1,167 +0,0 @@
-/* pcy_lib.c */
-/* Written by Dr Stephen N Henson (shenson@bigfoot.com) for the OpenSSL
- * project 2004.
- */
-/* ====================================================================
- * Copyright (c) 2004 The OpenSSL Project.  All rights reserved.
- *
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions
- * are met:
- *
- * 1. Redistributions of source code must retain the above copyright
- *    notice, this list of conditions and the following disclaimer. 
- *
- * 2. Redistributions in binary form must reproduce the above copyright
- *    notice, this list of conditions and the following disclaimer in
- *    the documentation and/or other materials provided with the
- *    distribution.
- *
- * 3. All advertising materials mentioning features or use of this
- *    software must display the following acknowledgment:
- *    "This product includes software developed by the OpenSSL Project
- *    for use in the OpenSSL Toolkit. (http://www.OpenSSL.org/)"
- *
- * 4. The names "OpenSSL Toolkit" and "OpenSSL Project" must not be used to
- *    endorse or promote products derived from this software without
- *    prior written permission. For written permission, please contact
- *    licensing@OpenSSL.org.
- *
- * 5. Products derived from this software may not be called "OpenSSL"
- *    nor may "OpenSSL" appear in their names without prior written
- *    permission of the OpenSSL Project.
- *
- * 6. Redistributions of any form whatsoever must retain the following
- *    acknowledgment:
- *    "This product includes software developed by the OpenSSL Project
- *    for use in the OpenSSL Toolkit (http://www.OpenSSL.org/)"
- *
- * THIS SOFTWARE IS PROVIDED BY THE OpenSSL PROJECT ``AS IS'' AND ANY
- * EXPRESSED OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
- * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR
- * PURPOSE ARE DISCLAIMED.  IN NO EVENT SHALL THE OpenSSL PROJECT OR
- * ITS CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
- * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
- * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
- * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
- * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
- * STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
- * ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED
- * OF THE POSSIBILITY OF SUCH DAMAGE.
- * ====================================================================
- *
- * This product includes cryptographic software written by Eric Young
- * (eay@cryptsoft.com).  This product includes software written by Tim
- * Hudson (tjh@cryptsoft.com).
- *
- */
-
-
-#include "cryptlib.h"
-#include <openssl/x509.h>
-#include <openssl/x509v3.h>
-
-#include "pcy_int.h"
-
-/* accessor functions */
-
-/* X509_POLICY_TREE stuff */
-
-int X509_policy_tree_level_count(const X509_POLICY_TREE *tree)
-	{
-	if (!tree)
-		return 0;
-	return tree->nlevel;
-	}
-
-X509_POLICY_LEVEL *
-	X509_policy_tree_get0_level(const X509_POLICY_TREE *tree, int i)
-	{
-	if (!tree || (i < 0) || (i >= tree->nlevel))
-		return NULL;
-	return tree->levels + i;
-	}
-
-STACK_OF(X509_POLICY_NODE) *
-		X509_policy_tree_get0_policies(const X509_POLICY_TREE *tree)
-	{
-	if (!tree)
-		return NULL;
-	return tree->auth_policies;
-	}
-
-STACK_OF(X509_POLICY_NODE) *
-	X509_policy_tree_get0_user_policies(const X509_POLICY_TREE *tree)
-	{
-	if (!tree)
-		return NULL;
-	if (tree->flags & POLICY_FLAG_ANY_POLICY)
-		return tree->auth_policies;
-	else
-		return tree->user_policies;
-	}
-
-/* X509_POLICY_LEVEL stuff */
-
-int X509_policy_level_node_count(X509_POLICY_LEVEL *level)
-	{
-	int n;
-	if (!level)
-		return 0;
-	if (level->anyPolicy)
-		n = 1;
-	else
-		n = 0;
-	if (level->nodes)
-		n += sk_X509_POLICY_NODE_num(level->nodes);
-	return n;
-	}
-
-X509_POLICY_NODE *X509_policy_level_get0_node(X509_POLICY_LEVEL *level, int i)
-	{
-	if (!level)
-		return NULL;
-	if (level->anyPolicy)
-		{
-		if (i == 0)
-			return level->anyPolicy;
-		i--;
-		}
-	return sk_X509_POLICY_NODE_value(level->nodes, i);
-	}
-
-/* X509_POLICY_NODE stuff */
-
-const ASN1_OBJECT *X509_policy_node_get0_policy(const X509_POLICY_NODE *node)
-	{
-	if (!node)
-		return NULL;
-	return node->data->valid_policy;
-	}
-
-#if 0
-int X509_policy_node_get_critical(const X509_POLICY_NODE *node)
-	{
-	if (node_critical(node))
-		return 1;
-	return 0;
-	}
-#endif
-
-STACK_OF(POLICYQUALINFO) *
-		X509_policy_node_get0_qualifiers(const X509_POLICY_NODE *node)
-	{
-	if (!node)
-		return NULL;
-	return node->data->qualifier_set;
-	}
-
-const X509_POLICY_NODE *
-		X509_policy_node_get0_parent(const X509_POLICY_NODE *node)
-	{
-	if (!node)
-		return NULL;
-	return node->parent;
-	}
-
-
diff --git a/crypto/openssl/crypto/x509v3/pcy_map.c b/crypto/openssl/crypto/x509v3/pcy_map.c
deleted file mode 100644
index 35221e8ba82b..000000000000
--- a/crypto/openssl/crypto/x509v3/pcy_map.c
+++ /dev/null
@@ -1,186 +0,0 @@
-/* pcy_map.c */
-/* Written by Dr Stephen N Henson (shenson@bigfoot.com) for the OpenSSL
- * project 2004.
- */
-/* ====================================================================
- * Copyright (c) 2004 The OpenSSL Project.  All rights reserved.
- *
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions
- * are met:
- *
- * 1. Redistributions of source code must retain the above copyright
- *    notice, this list of conditions and the following disclaimer. 
- *
- * 2. Redistributions in binary form must reproduce the above copyright
- *    notice, this list of conditions and the following disclaimer in
- *    the documentation and/or other materials provided with the
- *    distribution.
- *
- * 3. All advertising materials mentioning features or use of this
- *    software must display the following acknowledgment:
- *    "This product includes software developed by the OpenSSL Project
- *    for use in the OpenSSL Toolkit. (http://www.OpenSSL.org/)"
- *
- * 4. The names "OpenSSL Toolkit" and "OpenSSL Project" must not be used to
- *    endorse or promote products derived from this software without
- *    prior written permission. For written permission, please contact
- *    licensing@OpenSSL.org.
- *
- * 5. Products derived from this software may not be called "OpenSSL"
- *    nor may "OpenSSL" appear in their names without prior written
- *    permission of the OpenSSL Project.
- *
- * 6. Redistributions of any form whatsoever must retain the following
- *    acknowledgment:
- *    "This product includes software developed by the OpenSSL Project
- *    for use in the OpenSSL Toolkit (http://www.OpenSSL.org/)"
- *
- * THIS SOFTWARE IS PROVIDED BY THE OpenSSL PROJECT ``AS IS'' AND ANY
- * EXPRESSED OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
- * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR
- * PURPOSE ARE DISCLAIMED.  IN NO EVENT SHALL THE OpenSSL PROJECT OR
- * ITS CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
- * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
- * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
- * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
- * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
- * STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
- * ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED
- * OF THE POSSIBILITY OF SUCH DAMAGE.
- * ====================================================================
- *
- * This product includes cryptographic software written by Eric Young
- * (eay@cryptsoft.com).  This product includes software written by Tim
- * Hudson (tjh@cryptsoft.com).
- *
- */
-
-#include "cryptlib.h"
-#include <openssl/x509.h>
-#include <openssl/x509v3.h>
-
-#include "pcy_int.h"
-
-static int ref_cmp(const X509_POLICY_REF * const *a,
-			const X509_POLICY_REF * const *b)
-	{
-	return OBJ_cmp((*a)->subjectDomainPolicy, (*b)->subjectDomainPolicy);
-	}
-
-static void policy_map_free(X509_POLICY_REF *map)
-	{
-	if (map->subjectDomainPolicy)
-		ASN1_OBJECT_free(map->subjectDomainPolicy);
-	OPENSSL_free(map);
-	}
-
-static X509_POLICY_REF *policy_map_find(X509_POLICY_CACHE *cache, ASN1_OBJECT *id)
-	{
-	X509_POLICY_REF tmp;
-	int idx;
-	tmp.subjectDomainPolicy = id;
-
-	idx = sk_X509_POLICY_REF_find(cache->maps, &tmp);
-	if (idx == -1)
-		return NULL;
-	return sk_X509_POLICY_REF_value(cache->maps, idx);
-	}
-
-/* Set policy mapping entries in cache.
- * Note: this modifies the passed POLICY_MAPPINGS structure
- */
-
-int policy_cache_set_mapping(X509 *x, POLICY_MAPPINGS *maps)
-	{
-	POLICY_MAPPING *map;
-	X509_POLICY_REF *ref = NULL;
-	X509_POLICY_DATA *data;
-	X509_POLICY_CACHE *cache = x->policy_cache;
-	int i;
-	int ret = 0;
-	if (sk_POLICY_MAPPING_num(maps) == 0)
-		{
-		ret = -1;
-		goto bad_mapping;
-		}
-	cache->maps = sk_X509_POLICY_REF_new(ref_cmp);
-	for (i = 0; i < sk_POLICY_MAPPING_num(maps); i++)
-		{
-		map = sk_POLICY_MAPPING_value(maps, i);
-		/* Reject if map to or from anyPolicy */
-		if ((OBJ_obj2nid(map->subjectDomainPolicy) == NID_any_policy)
-		   || (OBJ_obj2nid(map->issuerDomainPolicy) == NID_any_policy))
-			{
-			ret = -1;
-			goto bad_mapping;
-			}
-
-		/* If we've already mapped from this OID bad mapping */
-		if (policy_map_find(cache, map->subjectDomainPolicy) != NULL)
-			{
-			ret = -1;
-			goto bad_mapping;
-			}
-
-		/* Attempt to find matching policy data */
-		data = policy_cache_find_data(cache, map->issuerDomainPolicy);
-		/* If we don't have anyPolicy can't map */
-		if (!data && !cache->anyPolicy)
-			continue;
-
-		/* Create a NODE from anyPolicy */
-		if (!data)
-			{
-			data = policy_data_new(NULL, map->issuerDomainPolicy,
-					cache->anyPolicy->flags
-						& POLICY_DATA_FLAG_CRITICAL);
-			if (!data)
-				goto bad_mapping;
-			data->qualifier_set = cache->anyPolicy->qualifier_set;
-			map->issuerDomainPolicy = NULL;
-			data->flags |= POLICY_DATA_FLAG_MAPPED_ANY;
-			data->flags |= POLICY_DATA_FLAG_SHARED_QUALIFIERS;
-			if (!sk_X509_POLICY_DATA_push(cache->data, data))
-				{
-				policy_data_free(data);
-				goto bad_mapping;
-				}
-			}
-		else
-			data->flags |= POLICY_DATA_FLAG_MAPPED;
-
-		if (!sk_ASN1_OBJECT_push(data->expected_policy_set, 
-						map->subjectDomainPolicy))
-			goto bad_mapping;
-		
-		ref = OPENSSL_malloc(sizeof(X509_POLICY_REF));
-		if (!ref)
-			goto bad_mapping;
-
-		ref->subjectDomainPolicy = map->subjectDomainPolicy;
-		map->subjectDomainPolicy = NULL;
-		ref->data = data;
-
-		if (!sk_X509_POLICY_REF_push(cache->maps, ref))
-			goto bad_mapping;
-
-		ref = NULL;
-
-		}
-
-	ret = 1;
-	bad_mapping:
-	if (ret == -1)
-		x->ex_flags |= EXFLAG_INVALID_POLICY;
-	if (ref)
-		policy_map_free(ref);
-	if (ret <= 0)
-		{
-		sk_X509_POLICY_REF_pop_free(cache->maps, policy_map_free);
-		cache->maps = NULL;
-		}
-	sk_POLICY_MAPPING_pop_free(maps, POLICY_MAPPING_free);
-	return ret;
-
-	}
diff --git a/crypto/openssl/crypto/x509v3/pcy_node.c b/crypto/openssl/crypto/x509v3/pcy_node.c
deleted file mode 100644
index dcc1554e2992..000000000000
--- a/crypto/openssl/crypto/x509v3/pcy_node.c
+++ /dev/null
@@ -1,158 +0,0 @@
-/* pcy_node.c */
-/* Written by Dr Stephen N Henson (shenson@bigfoot.com) for the OpenSSL
- * project 2004.
- */
-/* ====================================================================
- * Copyright (c) 2004 The OpenSSL Project.  All rights reserved.
- *
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions
- * are met:
- *
- * 1. Redistributions of source code must retain the above copyright
- *    notice, this list of conditions and the following disclaimer. 
- *
- * 2. Redistributions in binary form must reproduce the above copyright
- *    notice, this list of conditions and the following disclaimer in
- *    the documentation and/or other materials provided with the
- *    distribution.
- *
- * 3. All advertising materials mentioning features or use of this
- *    software must display the following acknowledgment:
- *    "This product includes software developed by the OpenSSL Project
- *    for use in the OpenSSL Toolkit. (http://www.OpenSSL.org/)"
- *
- * 4. The names "OpenSSL Toolkit" and "OpenSSL Project" must not be used to
- *    endorse or promote products derived from this software without
- *    prior written permission. For written permission, please contact
- *    licensing@OpenSSL.org.
- *
- * 5. Products derived from this software may not be called "OpenSSL"
- *    nor may "OpenSSL" appear in their names without prior written
- *    permission of the OpenSSL Project.
- *
- * 6. Redistributions of any form whatsoever must retain the following
- *    acknowledgment:
- *    "This product includes software developed by the OpenSSL Project
- *    for use in the OpenSSL Toolkit (http://www.OpenSSL.org/)"
- *
- * THIS SOFTWARE IS PROVIDED BY THE OpenSSL PROJECT ``AS IS'' AND ANY
- * EXPRESSED OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
- * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR
- * PURPOSE ARE DISCLAIMED.  IN NO EVENT SHALL THE OpenSSL PROJECT OR
- * ITS CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
- * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
- * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
- * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
- * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
- * STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
- * ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED
- * OF THE POSSIBILITY OF SUCH DAMAGE.
- * ====================================================================
- *
- * This product includes cryptographic software written by Eric Young
- * (eay@cryptsoft.com).  This product includes software written by Tim
- * Hudson (tjh@cryptsoft.com).
- *
- */
-
-#include <openssl/asn1.h>
-#include <openssl/x509.h>
-#include <openssl/x509v3.h>
-
-#include "pcy_int.h"
-
-static int node_cmp(const X509_POLICY_NODE * const *a,
-			const X509_POLICY_NODE * const *b)
-	{
-	return OBJ_cmp((*a)->data->valid_policy, (*b)->data->valid_policy);
-	}
-
-STACK_OF(X509_POLICY_NODE) *policy_node_cmp_new(void)
-	{
-	return sk_X509_POLICY_NODE_new(node_cmp);
-	}
-
-X509_POLICY_NODE *tree_find_sk(STACK_OF(X509_POLICY_NODE) *nodes,
-					const ASN1_OBJECT *id)
-	{
-	X509_POLICY_DATA n;
-	X509_POLICY_NODE l;
-	int idx;
-
-	n.valid_policy = (ASN1_OBJECT *)id;
-	l.data = &n;
-
-	idx = sk_X509_POLICY_NODE_find(nodes, &l);
-	if (idx == -1)
-		return NULL;
-
-	return sk_X509_POLICY_NODE_value(nodes, idx);
-
-	}
-
-X509_POLICY_NODE *level_find_node(const X509_POLICY_LEVEL *level,
-					const ASN1_OBJECT *id)
-	{
-	return tree_find_sk(level->nodes, id);
-	}
-
-X509_POLICY_NODE *level_add_node(X509_POLICY_LEVEL *level,
-			X509_POLICY_DATA *data,
-			X509_POLICY_NODE *parent,
-			X509_POLICY_TREE *tree)
-	{
-	X509_POLICY_NODE *node;
-	node = OPENSSL_malloc(sizeof(X509_POLICY_NODE));
-	if (!node)
-		return NULL;
-	node->data = data;
-	node->parent = parent;
-	node->nchild = 0;
-	if (level)
-		{
-		if (OBJ_obj2nid(data->valid_policy) == NID_any_policy)
-			{
-			if (level->anyPolicy)
-				goto node_error;
-			level->anyPolicy = node;
-			}
-		else
-			{
-
-			if (!level->nodes)
-				level->nodes = policy_node_cmp_new();
-			if (!level->nodes)
-				goto node_error;
-			if (!sk_X509_POLICY_NODE_push(level->nodes, node))
-				goto node_error;
-			}
-		}
-
-	if (tree)
-		{
-		if (!tree->extra_data)
-			 tree->extra_data = sk_X509_POLICY_DATA_new_null();
-		if (!tree->extra_data)
-			goto node_error;
-		if (!sk_X509_POLICY_DATA_push(tree->extra_data, data))
-			goto node_error;
-		}
-
-	if (parent)
-		parent->nchild++;
-
-	return node;
-
-	node_error:
-	policy_node_free(node);
-	return 0;
-
-	}
-
-void policy_node_free(X509_POLICY_NODE *node)
-	{
-	OPENSSL_free(node);
-	}
-
-
diff --git a/crypto/openssl/crypto/x509v3/pcy_tree.c b/crypto/openssl/crypto/x509v3/pcy_tree.c
deleted file mode 100644
index 27d29f25a84e..000000000000
--- a/crypto/openssl/crypto/x509v3/pcy_tree.c
+++ /dev/null
@@ -1,692 +0,0 @@
-/* pcy_tree.c */
-/* Written by Dr Stephen N Henson (shenson@bigfoot.com) for the OpenSSL
- * project 2004.
- */
-/* ====================================================================
- * Copyright (c) 2004 The OpenSSL Project.  All rights reserved.
- *
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions
- * are met:
- *
- * 1. Redistributions of source code must retain the above copyright
- *    notice, this list of conditions and the following disclaimer. 
- *
- * 2. Redistributions in binary form must reproduce the above copyright
- *    notice, this list of conditions and the following disclaimer in
- *    the documentation and/or other materials provided with the
- *    distribution.
- *
- * 3. All advertising materials mentioning features or use of this
- *    software must display the following acknowledgment:
- *    "This product includes software developed by the OpenSSL Project
- *    for use in the OpenSSL Toolkit. (http://www.OpenSSL.org/)"
- *
- * 4. The names "OpenSSL Toolkit" and "OpenSSL Project" must not be used to
- *    endorse or promote products derived from this software without
- *    prior written permission. For written permission, please contact
- *    licensing@OpenSSL.org.
- *
- * 5. Products derived from this software may not be called "OpenSSL"
- *    nor may "OpenSSL" appear in their names without prior written
- *    permission of the OpenSSL Project.
- *
- * 6. Redistributions of any form whatsoever must retain the following
- *    acknowledgment:
- *    "This product includes software developed by the OpenSSL Project
- *    for use in the OpenSSL Toolkit (http://www.OpenSSL.org/)"
- *
- * THIS SOFTWARE IS PROVIDED BY THE OpenSSL PROJECT ``AS IS'' AND ANY
- * EXPRESSED OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
- * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR
- * PURPOSE ARE DISCLAIMED.  IN NO EVENT SHALL THE OpenSSL PROJECT OR
- * ITS CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
- * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
- * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
- * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
- * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
- * STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
- * ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED
- * OF THE POSSIBILITY OF SUCH DAMAGE.
- * ====================================================================
- *
- * This product includes cryptographic software written by Eric Young
- * (eay@cryptsoft.com).  This product includes software written by Tim
- * Hudson (tjh@cryptsoft.com).
- *
- */
-
-#include "cryptlib.h"
-#include <openssl/x509.h>
-#include <openssl/x509v3.h>
-
-#include "pcy_int.h"
-
-/* Initialize policy tree. Return values:
- *  0 Some internal error occured.
- * -1 Inconsistent or invalid extensions in certificates.
- *  1 Tree initialized OK.
- *  2 Policy tree is empty.
- *  5 Tree OK and requireExplicitPolicy true.
- *  6 Tree empty and requireExplicitPolicy true.
- */
-
-static int tree_init(X509_POLICY_TREE **ptree, STACK_OF(X509) *certs,
-			unsigned int flags)
-	{
-	X509_POLICY_TREE *tree;
-	X509_POLICY_LEVEL *level;
-	const X509_POLICY_CACHE *cache;
-	X509_POLICY_DATA *data = NULL;
-	X509 *x;
-	int ret = 1;
-	int i, n;
-	int explicit_policy;
-	int any_skip;
-	int map_skip;
-	*ptree = NULL;
-	n = sk_X509_num(certs);
-
-	/* Disable policy mapping for now... */
-	flags |= X509_V_FLAG_INHIBIT_MAP;
-
-	if (flags & X509_V_FLAG_EXPLICIT_POLICY)
-		explicit_policy = 0;
-	else
-		explicit_policy = n + 1;
-
-	if (flags & X509_V_FLAG_INHIBIT_ANY)
-		any_skip = 0;
-	else
-		any_skip = n + 1;
-
-	if (flags & X509_V_FLAG_INHIBIT_MAP)
-		map_skip = 0;
-	else
-		map_skip = n + 1;
-
-	/* Can't do anything with just a trust anchor */
-	if (n == 1)
-		return 1;
-	/* First setup policy cache in all certificates apart from the
-	 * trust anchor. Note any bad cache results on the way. Also can
-	 * calculate explicit_policy value at this point.
-	 */
-	for (i = n - 2; i >= 0; i--)
-		{
-		x = sk_X509_value(certs, i);
-		X509_check_purpose(x, -1, -1);
-		cache = policy_cache_set(x);
-		/* If cache NULL something bad happened: return immediately */
-		if (cache == NULL)
-			return 0;
-		/* If inconsistent extensions keep a note of it but continue */
-		if (x->ex_flags & EXFLAG_INVALID_POLICY)
-			ret = -1;
-		/* Otherwise if we have no data (hence no CertificatePolicies)
-		 * and haven't already set an inconsistent code note it.
-		 */
-		else if ((ret == 1) && !cache->data)
-			ret = 2;
-		if (explicit_policy > 0)
-			{
-			explicit_policy--;
-			if (!(x->ex_flags & EXFLAG_SS)
-				&& (cache->explicit_skip != -1)
-				&& (cache->explicit_skip < explicit_policy))
-				explicit_policy = cache->explicit_skip;
-			}
-		}
-
-	if (ret != 1)
-		{
-		if (ret == 2 && !explicit_policy)
-			return 6;
-		return ret;
-		}
-
-
-	/* If we get this far initialize the tree */
-
-	tree = OPENSSL_malloc(sizeof(X509_POLICY_TREE));
-
-	if (!tree)
-		return 0;
-
-	tree->flags = 0;
-	tree->levels = OPENSSL_malloc(sizeof(X509_POLICY_LEVEL) * n);
-	tree->nlevel = 0;
-	tree->extra_data = NULL;
-	tree->auth_policies = NULL;
-	tree->user_policies = NULL;
-
-	if (!tree)
-		{
-		OPENSSL_free(tree);
-		return 0;
-		}
-
-	memset(tree->levels, 0, n * sizeof(X509_POLICY_LEVEL));
-
-	tree->nlevel = n;
-
-	level = tree->levels;
-
-	/* Root data: initialize to anyPolicy */
-
-	data = policy_data_new(NULL, OBJ_nid2obj(NID_any_policy), 0);
-
-	if (!data || !level_add_node(level, data, NULL, tree))
-		goto bad_tree;
-
-	for (i = n - 2; i >= 0; i--)
-		{
-		level++;
-		x = sk_X509_value(certs, i);
-		cache = policy_cache_set(x);
-
-		CRYPTO_add(&x->references, 1, CRYPTO_LOCK_X509);
-		level->cert = x;
-
-		if (!cache->anyPolicy)
-				level->flags |= X509_V_FLAG_INHIBIT_ANY;
-
-		/* Determine inhibit any and inhibit map flags */
-		if (any_skip == 0)
-			{
-			/* Any matching allowed if certificate is self
-			 * issued and not the last in the chain.
-			 */
-			if (!(x->ex_flags & EXFLAG_SS) || (i == 0))
-				level->flags |= X509_V_FLAG_INHIBIT_ANY;
-			}
-		else
-			{
-			any_skip--;
-			if ((cache->any_skip > 0)
-				&& (cache->any_skip < any_skip))
-				any_skip = cache->any_skip;
-			}
-
-		if (map_skip == 0)
-			level->flags |= X509_V_FLAG_INHIBIT_MAP;
-		else
-			{
-			map_skip--;
-			if ((cache->map_skip > 0)
-				&& (cache->map_skip < map_skip))
-				map_skip = cache->map_skip;
-			}
-
-
-		}
-
-	*ptree = tree;
-
-	if (explicit_policy)
-		return 1;
-	else
-		return 5;
-
-	bad_tree:
-
-	X509_policy_tree_free(tree);
-
-	return 0;
-
-	}
-
-/* This corresponds to RFC3280 XXXX XXXXX:
- * link any data from CertificatePolicies onto matching parent
- * or anyPolicy if no match.
- */
-
-static int tree_link_nodes(X509_POLICY_LEVEL *curr,
-				const X509_POLICY_CACHE *cache)
-	{
-	int i;
-	X509_POLICY_LEVEL *last;
-	X509_POLICY_DATA *data;
-	X509_POLICY_NODE *parent;
-	last = curr - 1;
-	for (i = 0; i < sk_X509_POLICY_DATA_num(cache->data); i++)
-		{
-		data = sk_X509_POLICY_DATA_value(cache->data, i);
-		/* If a node is mapped any it doesn't have a corresponding
-		 * CertificatePolicies entry. 
-		 * However such an identical node would be created
-		 * if anyPolicy matching is enabled because there would be
-		 * no match with the parent valid_policy_set. So we create
-		 * link because then it will have the mapping flags
-		 * right and we can prune it later.
-		 */
-		if ((data->flags & POLICY_DATA_FLAG_MAPPED_ANY)
-			&& !(curr->flags & X509_V_FLAG_INHIBIT_ANY))
-			continue;
-		/* Look for matching node in parent */
-		parent = level_find_node(last, data->valid_policy);
-		/* If no match link to anyPolicy */
-		if (!parent)
-			parent = last->anyPolicy;
-		if (parent && !level_add_node(curr, data, parent, NULL))
-				return 0;
-		}
-	return 1;
-	}
-
-/* This corresponds to RFC3280 XXXX XXXXX:
- * Create new data for any unmatched policies in the parent and link
- * to anyPolicy.
- */
-
-static int tree_link_any(X509_POLICY_LEVEL *curr,
-			const X509_POLICY_CACHE *cache,
-			X509_POLICY_TREE *tree)
-	{
-	int i;
-	X509_POLICY_DATA *data;
-	X509_POLICY_NODE *node;
-	X509_POLICY_LEVEL *last;
-
-	last = curr - 1;
-
-	for (i = 0; i < sk_X509_POLICY_NODE_num(last->nodes); i++)
-		{
-		node = sk_X509_POLICY_NODE_value(last->nodes, i);
-
-		/* Skip any node with any children: we only want unmathced
-		 * nodes.
-		 *
-		 * Note: need something better for policy mapping
-		 * because each node may have multiple children 
-		 */
-		if (node->nchild)
-			continue;
-		/* Create a new node with qualifiers from anyPolicy and
-		 * id from unmatched node.
-		 */
-		data = policy_data_new(NULL, node->data->valid_policy, 
-						node_critical(node));
-
-		if (data == NULL)
-			return 0;
-		data->qualifier_set = curr->anyPolicy->data->qualifier_set;
-		data->flags |= POLICY_DATA_FLAG_SHARED_QUALIFIERS;
-		if (!level_add_node(curr, data, node, tree))
-			{
-			policy_data_free(data);
-			return 0;
-			}
-		}
-	/* Finally add link to anyPolicy */
-	if (last->anyPolicy)
-		{
-		if (!level_add_node(curr, cache->anyPolicy,
-						last->anyPolicy, NULL))
-			return 0;
-		}
-	return 1;
-	}
-
-/* Prune the tree: delete any child mapped child data on the current level
- * then proceed up the tree deleting any data with no children. If we ever
- * have no data on a level we can halt because the tree will be empty.
- */
-
-static int tree_prune(X509_POLICY_TREE *tree, X509_POLICY_LEVEL *curr)
-	{
-	X509_POLICY_NODE *node;
-	int i;
-	for (i = sk_X509_POLICY_NODE_num(curr->nodes) - 1; i >= 0; i--)
-		{
-		node = sk_X509_POLICY_NODE_value(curr->nodes, i);
-		/* Delete any mapped data: see RFC3280 XXXX */
-		if (node->data->flags & POLICY_DATA_FLAG_MAP_MASK)
-			{
-			node->parent->nchild--;
-			OPENSSL_free(node);
-			sk_X509_POLICY_NODE_delete(curr->nodes, i);
-			}
-		}
-
-	for(;;)	{
-		--curr;
-		for (i = sk_X509_POLICY_NODE_num(curr->nodes) - 1; i >= 0; i--)
-			{
-			node = sk_X509_POLICY_NODE_value(curr->nodes, i);
-			if (node->nchild == 0)
-				{
-				node->parent->nchild--;
-				OPENSSL_free(node);
-				sk_X509_POLICY_NODE_delete(curr->nodes, i);
-				}
-			}
-		if (curr->anyPolicy && !curr->anyPolicy->nchild)
-			{
-			if (curr->anyPolicy->parent)
-				curr->anyPolicy->parent->nchild--;
-			OPENSSL_free(curr->anyPolicy);
-			curr->anyPolicy = NULL;
-			}
-		if (curr == tree->levels)
-			{
-			/* If we zapped anyPolicy at top then tree is empty */
-			if (!curr->anyPolicy)
-					return 2;
-			return 1;
-			}
-		}
-
-	return 1;
-
-	}
-
-static int tree_add_auth_node(STACK_OF(X509_POLICY_NODE) **pnodes,
-						 X509_POLICY_NODE *pcy)
-	{
-	if (!*pnodes)
-		{
-		*pnodes = policy_node_cmp_new();
-		if (!*pnodes)
-			return 0;
-		}
-	else if (sk_X509_POLICY_NODE_find(*pnodes, pcy) != -1)
-		return 1;
-
-	if (!sk_X509_POLICY_NODE_push(*pnodes, pcy))
-		return 0;
-
-	return 1;
-
-	}
-
-/* Calculate the authority set based on policy tree.
- * The 'pnodes' parameter is used as a store for the set of policy nodes
- * used to calculate the user set. If the authority set is not anyPolicy
- * then pnodes will just point to the authority set. If however the authority
- * set is anyPolicy then the set of valid policies (other than anyPolicy)
- * is store in pnodes. The return value of '2' is used in this case to indicate
- * that pnodes should be freed.
- */
-
-static int tree_calculate_authority_set(X509_POLICY_TREE *tree,
-					STACK_OF(X509_POLICY_NODE) **pnodes)
-	{
-	X509_POLICY_LEVEL *curr;
-	X509_POLICY_NODE *node, *anyptr;
-	STACK_OF(X509_POLICY_NODE) **addnodes;
-	int i, j;
-	curr = tree->levels + tree->nlevel - 1;
-
-	/* If last level contains anyPolicy set is anyPolicy */
-	if (curr->anyPolicy)
-		{
-		if (!tree_add_auth_node(&tree->auth_policies, curr->anyPolicy))
-			return 0;
-		addnodes = pnodes;
-		}
-	else
-		/* Add policies to authority set */
-		addnodes = &tree->auth_policies;
-
-	curr = tree->levels;
-	for (i = 1; i < tree->nlevel; i++)
-		{
-		/* If no anyPolicy node on this this level it can't
-		 * appear on lower levels so end search.
-		 */
-		if (!(anyptr = curr->anyPolicy))
-			break;
-		curr++;
-		for (j = 0; j < sk_X509_POLICY_NODE_num(curr->nodes); j++)
-			{
-			node = sk_X509_POLICY_NODE_value(curr->nodes, j);
-			if ((node->parent == anyptr)
-				&& !tree_add_auth_node(addnodes, node))
-					return 0;
-			}
-		}
-
-	if (addnodes == pnodes)
-		return 2;
-
-	*pnodes = tree->auth_policies;
-
-	return 1;
-	}
-
-static int tree_calculate_user_set(X509_POLICY_TREE *tree,
-				STACK_OF(ASN1_OBJECT) *policy_oids,
-				STACK_OF(X509_POLICY_NODE) *auth_nodes)
-	{
-	int i;
-	X509_POLICY_NODE *node;
-	ASN1_OBJECT *oid;
-
-	X509_POLICY_NODE *anyPolicy;
-	X509_POLICY_DATA *extra;
-
-	/* Check if anyPolicy present in authority constrained policy set:
-	 * this will happen if it is a leaf node.
-	 */
-
-	if (sk_ASN1_OBJECT_num(policy_oids) <= 0)
-		return 1;
-
-	anyPolicy = tree->levels[tree->nlevel - 1].anyPolicy;
-
-	for (i = 0; i < sk_ASN1_OBJECT_num(policy_oids); i++)
-		{
-		oid = sk_ASN1_OBJECT_value(policy_oids, i);
-		if (OBJ_obj2nid(oid) == NID_any_policy)
-			{
-			tree->flags |= POLICY_FLAG_ANY_POLICY;
-			return 1;
-			}
-		}
-
-	for (i = 0; i < sk_ASN1_OBJECT_num(policy_oids); i++)
-		{
-		oid = sk_ASN1_OBJECT_value(policy_oids, i);
-		node = tree_find_sk(auth_nodes, oid);
-		if (!node)
-			{
-			if (!anyPolicy)
-				continue;
-			/* Create a new node with policy ID from user set
-			 * and qualifiers from anyPolicy.
-			 */
-			extra = policy_data_new(NULL, oid,
-						node_critical(anyPolicy));
-			if (!extra)
-				return 0;
-			extra->qualifier_set = anyPolicy->data->qualifier_set;
-			extra->flags = POLICY_DATA_FLAG_SHARED_QUALIFIERS
-						| POLICY_DATA_FLAG_EXTRA_NODE;
-			node = level_add_node(NULL, extra, anyPolicy->parent,
-						tree);
-			}
-		if (!tree->user_policies)
-			{
-			tree->user_policies = sk_X509_POLICY_NODE_new_null();
-			if (!tree->user_policies)
-				return 1;
-			}
-		if (!sk_X509_POLICY_NODE_push(tree->user_policies, node))
-			return 0;
-		}
-	return 1;
-
-	}
-
-static int tree_evaluate(X509_POLICY_TREE *tree)
-	{
-	int ret, i;
-	X509_POLICY_LEVEL *curr = tree->levels + 1;
-	const X509_POLICY_CACHE *cache;
-
-	for(i = 1; i < tree->nlevel; i++, curr++)
-		{
-		cache = policy_cache_set(curr->cert);
-		if (!tree_link_nodes(curr, cache))
-			return 0;
-
-		if (!(curr->flags & X509_V_FLAG_INHIBIT_ANY)
-			&& !tree_link_any(curr, cache, tree))
-			return 0;
-		ret = tree_prune(tree, curr);
-		if (ret != 1)
-			return ret;
-		}
-
-	return 1;
-
-	}
-
-static void exnode_free(X509_POLICY_NODE *node)
-	{
-	if (node->data && (node->data->flags & POLICY_DATA_FLAG_EXTRA_NODE))
-		OPENSSL_free(node);
-	}
-
-
-void X509_policy_tree_free(X509_POLICY_TREE *tree)
-	{
-	X509_POLICY_LEVEL *curr;
-	int i;
-
-	if (!tree)
-		return;
-
-	sk_X509_POLICY_NODE_free(tree->auth_policies);
-	sk_X509_POLICY_NODE_pop_free(tree->user_policies, exnode_free);
-
-	for(i = 0, curr = tree->levels; i < tree->nlevel; i++, curr++)
-		{
-		if (curr->cert)
-			X509_free(curr->cert);
-		if (curr->nodes)
-			sk_X509_POLICY_NODE_pop_free(curr->nodes,
-						policy_node_free);
-		if (curr->anyPolicy)
-			policy_node_free(curr->anyPolicy);
-		}
-
-	if (tree->extra_data)
-		sk_X509_POLICY_DATA_pop_free(tree->extra_data,
-						policy_data_free);
-
-	OPENSSL_free(tree->levels);
-	OPENSSL_free(tree);
-
-	}
-
-/* Application policy checking function.
- * Return codes:
- *  0 	Internal Error.
- *  1   Successful.
- * -1   One or more certificates contain invalid or inconsistent extensions
- * -2	User constrained policy set empty and requireExplicit true.
- */
-
-int X509_policy_check(X509_POLICY_TREE **ptree, int *pexplicit_policy,
-			STACK_OF(X509) *certs,
-			STACK_OF(ASN1_OBJECT) *policy_oids,
-			unsigned int flags)
-	{
-	int ret;
-	X509_POLICY_TREE *tree = NULL;
-	STACK_OF(X509_POLICY_NODE) *nodes, *auth_nodes = NULL;
-	*ptree = NULL;
-
-	*pexplicit_policy = 0;
-	ret = tree_init(&tree, certs, flags);
-
-
-	switch (ret)
-		{
-
-		/* Tree empty requireExplicit False: OK */
-		case 2:
-		return 1;
-
-		/* Some internal error */
-		case 0:
-		return 0;
-
-		/* Tree empty requireExplicit True: Error */
-
-		case 6:
-		*pexplicit_policy = 1;
-		return -2;
-
-		/* Tree OK requireExplicit True: OK and continue */
-		case 5:
-		*pexplicit_policy = 1;
-		break;
-
-		/* Tree OK: continue */
-
-		case 1:
-		if (!tree)
-			/*
-			 * tree_init() returns success and a null tree
-			 * if it's just looking at a trust anchor.
-			 * I'm not sure that returning success here is
-			 * correct, but I'm sure that reporting this
-			 * as an internal error which our caller
-			 * interprets as a malloc failure is wrong.
-			 */
-			return 1;
-		break;
-		}
-
-	if (!tree) goto error;
-	ret = tree_evaluate(tree);
-
-	if (ret <= 0)
-		goto error;
-
-	/* Return value 2 means tree empty */
-	if (ret == 2)
-		{
-		X509_policy_tree_free(tree);
-		if (*pexplicit_policy)
-			return -2;
-		else
-			return 1;
-		}
-
-	/* Tree is not empty: continue */
-
-	ret = tree_calculate_authority_set(tree, &auth_nodes);
-
-	if (!ret)
-		goto error;
-
-	if (!tree_calculate_user_set(tree, policy_oids, auth_nodes))
-		goto error;
-	
-	if (ret == 2)
-		sk_X509_POLICY_NODE_free(auth_nodes);
-
-	if (tree)
-		*ptree = tree;
-
-	if (*pexplicit_policy)
-		{
-		nodes = X509_policy_tree_get0_user_policies(tree);
-		if (sk_X509_POLICY_NODE_num(nodes) <= 0)
-			return -2;
-		}
-
-	return 1;
-
-	error:
-
-	X509_policy_tree_free(tree);
-
-	return 0;
-
-	}
-
diff --git a/crypto/openssl/crypto/x509v3/tabtest.c b/crypto/openssl/crypto/x509v3/tabtest.c
deleted file mode 100644
index dad0d38dd530..000000000000
--- a/crypto/openssl/crypto/x509v3/tabtest.c
+++ /dev/null
@@ -1,88 +0,0 @@
-/* tabtest.c */
-/* Written by Dr Stephen N Henson (shenson@bigfoot.com) for the OpenSSL
- * project 1999.
- */
-/* ====================================================================
- * Copyright (c) 1999 The OpenSSL Project.  All rights reserved.
- *
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions
- * are met:
- *
- * 1. Redistributions of source code must retain the above copyright
- *    notice, this list of conditions and the following disclaimer. 
- *
- * 2. Redistributions in binary form must reproduce the above copyright
- *    notice, this list of conditions and the following disclaimer in
- *    the documentation and/or other materials provided with the
- *    distribution.
- *
- * 3. All advertising materials mentioning features or use of this
- *    software must display the following acknowledgment:
- *    "This product includes software developed by the OpenSSL Project
- *    for use in the OpenSSL Toolkit. (http://www.OpenSSL.org/)"
- *
- * 4. The names "OpenSSL Toolkit" and "OpenSSL Project" must not be used to
- *    endorse or promote products derived from this software without
- *    prior written permission. For written permission, please contact
- *    licensing@OpenSSL.org.
- *
- * 5. Products derived from this software may not be called "OpenSSL"
- *    nor may "OpenSSL" appear in their names without prior written
- *    permission of the OpenSSL Project.
- *
- * 6. Redistributions of any form whatsoever must retain the following
- *    acknowledgment:
- *    "This product includes software developed by the OpenSSL Project
- *    for use in the OpenSSL Toolkit (http://www.OpenSSL.org/)"
- *
- * THIS SOFTWARE IS PROVIDED BY THE OpenSSL PROJECT ``AS IS'' AND ANY
- * EXPRESSED OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
- * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR
- * PURPOSE ARE DISCLAIMED.  IN NO EVENT SHALL THE OpenSSL PROJECT OR
- * ITS CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
- * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
- * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
- * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
- * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
- * STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
- * ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED
- * OF THE POSSIBILITY OF SUCH DAMAGE.
- * ====================================================================
- *
- * This product includes cryptographic software written by Eric Young
- * (eay@cryptsoft.com).  This product includes software written by Tim
- * Hudson (tjh@cryptsoft.com).
- *
- */
-
-/* Simple program to check the ext_dat.h is correct and print out
- * problems if it is not.
- */
-
-#include <stdio.h>
-
-#include <openssl/x509v3.h>
-
-#include "ext_dat.h"
-
-main()
-{
-	int i, prev = -1, bad = 0;
-	X509V3_EXT_METHOD **tmp;
-	i = sizeof(standard_exts) / sizeof(X509V3_EXT_METHOD *);
-	if(i != STANDARD_EXTENSION_COUNT)
-		fprintf(stderr, "Extension number invalid expecting %d\n", i);
-	tmp = standard_exts;
-	for(i = 0; i < STANDARD_EXTENSION_COUNT; i++, tmp++) {
-		if((*tmp)->ext_nid < prev) bad = 1;
-		prev = (*tmp)->ext_nid;
-		
-	}
-	if(bad) {
-		tmp = standard_exts;
-		fprintf(stderr, "Extensions out of order!\n");
-		for(i = 0; i < STANDARD_EXTENSION_COUNT; i++, tmp++)
-		printf("%d : %s\n", (*tmp)->ext_nid, OBJ_nid2sn((*tmp)->ext_nid));
-	} else fprintf(stderr, "Order OK\n");
-}
diff --git a/crypto/openssl/crypto/x509v3/v3_addr.c b/crypto/openssl/crypto/x509v3/v3_addr.c
deleted file mode 100644
index ed9847b3071f..000000000000
--- a/crypto/openssl/crypto/x509v3/v3_addr.c
+++ /dev/null
@@ -1,1280 +0,0 @@
-/*
- * Contributed to the OpenSSL Project by the American Registry for
- * Internet Numbers ("ARIN").
- */
-/* ====================================================================
- * Copyright (c) 2006 The OpenSSL Project.  All rights reserved.
- *
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions
- * are met:
- *
- * 1. Redistributions of source code must retain the above copyright
- *    notice, this list of conditions and the following disclaimer. 
- *
- * 2. Redistributions in binary form must reproduce the above copyright
- *    notice, this list of conditions and the following disclaimer in
- *    the documentation and/or other materials provided with the
- *    distribution.
- *
- * 3. All advertising materials mentioning features or use of this
- *    software must display the following acknowledgment:
- *    "This product includes software developed by the OpenSSL Project
- *    for use in the OpenSSL Toolkit. (http://www.OpenSSL.org/)"
- *
- * 4. The names "OpenSSL Toolkit" and "OpenSSL Project" must not be used to
- *    endorse or promote products derived from this software without
- *    prior written permission. For written permission, please contact
- *    licensing@OpenSSL.org.
- *
- * 5. Products derived from this software may not be called "OpenSSL"
- *    nor may "OpenSSL" appear in their names without prior written
- *    permission of the OpenSSL Project.
- *
- * 6. Redistributions of any form whatsoever must retain the following
- *    acknowledgment:
- *    "This product includes software developed by the OpenSSL Project
- *    for use in the OpenSSL Toolkit (http://www.OpenSSL.org/)"
- *
- * THIS SOFTWARE IS PROVIDED BY THE OpenSSL PROJECT ``AS IS'' AND ANY
- * EXPRESSED OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
- * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR
- * PURPOSE ARE DISCLAIMED.  IN NO EVENT SHALL THE OpenSSL PROJECT OR
- * ITS CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
- * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
- * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
- * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
- * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
- * STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
- * ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED
- * OF THE POSSIBILITY OF SUCH DAMAGE.
- * ====================================================================
- *
- * This product includes cryptographic software written by Eric Young
- * (eay@cryptsoft.com).  This product includes software written by Tim
- * Hudson (tjh@cryptsoft.com).
- */
-
-/*
- * Implementation of RFC 3779 section 2.2.
- */
-
-#include <stdio.h>
-#include <stdlib.h>
-#include <assert.h>
-#include "cryptlib.h"
-#include <openssl/conf.h>
-#include <openssl/asn1.h>
-#include <openssl/asn1t.h>
-#include <openssl/buffer.h>
-#include <openssl/x509v3.h>
-
-#ifndef OPENSSL_NO_RFC3779
-
-/*
- * OpenSSL ASN.1 template translation of RFC 3779 2.2.3.
- */
-
-ASN1_SEQUENCE(IPAddressRange) = {
-  ASN1_SIMPLE(IPAddressRange, min, ASN1_BIT_STRING),
-  ASN1_SIMPLE(IPAddressRange, max, ASN1_BIT_STRING)
-} ASN1_SEQUENCE_END(IPAddressRange)
-
-ASN1_CHOICE(IPAddressOrRange) = {
-  ASN1_SIMPLE(IPAddressOrRange, u.addressPrefix, ASN1_BIT_STRING),
-  ASN1_SIMPLE(IPAddressOrRange, u.addressRange,  IPAddressRange)
-} ASN1_CHOICE_END(IPAddressOrRange)
-
-ASN1_CHOICE(IPAddressChoice) = {
-  ASN1_SIMPLE(IPAddressChoice,      u.inherit,           ASN1_NULL),
-  ASN1_SEQUENCE_OF(IPAddressChoice, u.addressesOrRanges, IPAddressOrRange)
-} ASN1_CHOICE_END(IPAddressChoice)
-
-ASN1_SEQUENCE(IPAddressFamily) = {
-  ASN1_SIMPLE(IPAddressFamily, addressFamily,   ASN1_OCTET_STRING),
-  ASN1_SIMPLE(IPAddressFamily, ipAddressChoice, IPAddressChoice)
-} ASN1_SEQUENCE_END(IPAddressFamily)
-
-ASN1_ITEM_TEMPLATE(IPAddrBlocks) = 
-  ASN1_EX_TEMPLATE_TYPE(ASN1_TFLG_SEQUENCE_OF, 0,
-			IPAddrBlocks, IPAddressFamily)
-ASN1_ITEM_TEMPLATE_END(IPAddrBlocks)
-
-IMPLEMENT_ASN1_FUNCTIONS(IPAddressRange)
-IMPLEMENT_ASN1_FUNCTIONS(IPAddressOrRange)
-IMPLEMENT_ASN1_FUNCTIONS(IPAddressChoice)
-IMPLEMENT_ASN1_FUNCTIONS(IPAddressFamily)
-
-/*
- * How much buffer space do we need for a raw address?
- */
-#define ADDR_RAW_BUF_LEN	16
-
-/*
- * What's the address length associated with this AFI?
- */
-static int length_from_afi(const unsigned afi)
-{
-  switch (afi) {
-  case IANA_AFI_IPV4:
-    return 4;
-  case IANA_AFI_IPV6:
-    return 16;
-  default:
-    return 0;
-  }
-}
-
-/*
- * Extract the AFI from an IPAddressFamily.
- */
-unsigned v3_addr_get_afi(const IPAddressFamily *f)
-{
-  return ((f != NULL &&
-	   f->addressFamily != NULL &&
-	   f->addressFamily->data != NULL)
-	  ? ((f->addressFamily->data[0] << 8) |
-	     (f->addressFamily->data[1]))
-	  : 0);
-}
-
-/*
- * Expand the bitstring form of an address into a raw byte array.
- * At the moment this is coded for simplicity, not speed.
- */
-static void addr_expand(unsigned char *addr,
-			const ASN1_BIT_STRING *bs,
-			const int length,
-			const unsigned char fill)
-{
-  assert(bs->length >= 0 && bs->length <= length);
-  if (bs->length > 0) {
-    memcpy(addr, bs->data, bs->length);
-    if ((bs->flags & 7) != 0) {
-      unsigned char mask = 0xFF >> (8 - (bs->flags & 7));
-      if (fill == 0)
-	addr[bs->length - 1] &= ~mask;
-      else
-	addr[bs->length - 1] |= mask;
-    }
-  }
-  memset(addr + bs->length, fill, length - bs->length);
-}
-
-/*
- * Extract the prefix length from a bitstring.
- */
-#define addr_prefixlen(bs) ((int) ((bs)->length * 8 - ((bs)->flags & 7)))
-
-/*
- * i2r handler for one address bitstring.
- */
-static int i2r_address(BIO *out,
-		       const unsigned afi,
-		       const unsigned char fill,
-		       const ASN1_BIT_STRING *bs)
-{
-  unsigned char addr[ADDR_RAW_BUF_LEN];
-  int i, n;
-
-  switch (afi) {
-  case IANA_AFI_IPV4:
-    addr_expand(addr, bs, 4, fill);
-    BIO_printf(out, "%d.%d.%d.%d", addr[0], addr[1], addr[2], addr[3]);
-    break;
-  case IANA_AFI_IPV6:
-    addr_expand(addr, bs, 16, fill);
-    for (n = 16; n > 1 && addr[n-1] == 0x00 && addr[n-2] == 0x00; n -= 2)
-      ;
-    for (i = 0; i < n; i += 2)
-      BIO_printf(out, "%x%s", (addr[i] << 8) | addr[i+1], (i < 14 ? ":" : ""));
-    if (i < 16)
-      BIO_puts(out, ":");
-    break;
-  default:
-    for (i = 0; i < bs->length; i++)
-      BIO_printf(out, "%s%02x", (i > 0 ? ":" : ""), bs->data[i]);
-    BIO_printf(out, "[%d]", (int) (bs->flags & 7));
-    break;
-  }
-  return 1;
-}
-
-/*
- * i2r handler for a sequence of addresses and ranges.
- */
-static int i2r_IPAddressOrRanges(BIO *out,
-				 const int indent,
-				 const IPAddressOrRanges *aors,
-				 const unsigned afi)
-{
-  int i;
-  for (i = 0; i < sk_IPAddressOrRange_num(aors); i++) {
-    const IPAddressOrRange *aor = sk_IPAddressOrRange_value(aors, i);
-    BIO_printf(out, "%*s", indent, "");
-    switch (aor->type) {
-    case IPAddressOrRange_addressPrefix:
-      if (!i2r_address(out, afi, 0x00, aor->u.addressPrefix))
-	return 0;
-      BIO_printf(out, "/%d\n", addr_prefixlen(aor->u.addressPrefix));
-      continue;
-    case IPAddressOrRange_addressRange:
-      if (!i2r_address(out, afi, 0x00, aor->u.addressRange->min))
-	return 0;
-      BIO_puts(out, "-");
-      if (!i2r_address(out, afi, 0xFF, aor->u.addressRange->max))
-	return 0;
-      BIO_puts(out, "\n");
-      continue;
-    }
-  }
-  return 1;
-}
-
-/*
- * i2r handler for an IPAddrBlocks extension.
- */
-static int i2r_IPAddrBlocks(X509V3_EXT_METHOD *method,
-			    void *ext,
-			    BIO *out,
-			    int indent)
-{
-  const IPAddrBlocks *addr = ext;
-  int i;
-  for (i = 0; i < sk_IPAddressFamily_num(addr); i++) {
-    IPAddressFamily *f = sk_IPAddressFamily_value(addr, i);
-    const unsigned afi = v3_addr_get_afi(f);
-    switch (afi) {
-    case IANA_AFI_IPV4:
-      BIO_printf(out, "%*sIPv4", indent, "");
-      break;
-    case IANA_AFI_IPV6:
-      BIO_printf(out, "%*sIPv6", indent, "");
-      break;
-    default:
-      BIO_printf(out, "%*sUnknown AFI %u", indent, "", afi);
-      break;
-    }
-    if (f->addressFamily->length > 2) {
-      switch (f->addressFamily->data[2]) {
-      case   1:
-	BIO_puts(out, " (Unicast)");
-	break;
-      case   2:
-	BIO_puts(out, " (Multicast)");
-	break;
-      case   3:
-	BIO_puts(out, " (Unicast/Multicast)");
-	break;
-      case   4:
-	BIO_puts(out, " (MPLS)");
-	break;
-      case  64:
-	BIO_puts(out, " (Tunnel)");
-	break;
-      case  65:
-	BIO_puts(out, " (VPLS)");
-	break;
-      case  66:
-	BIO_puts(out, " (BGP MDT)");
-	break;
-      case 128:
-	BIO_puts(out, " (MPLS-labeled VPN)");
-	break;
-      default:  
-	BIO_printf(out, " (Unknown SAFI %u)",
-		   (unsigned) f->addressFamily->data[2]);
-	break;
-      }
-    }
-    switch (f->ipAddressChoice->type) {
-    case IPAddressChoice_inherit:
-      BIO_puts(out, ": inherit\n");
-      break;
-    case IPAddressChoice_addressesOrRanges:
-      BIO_puts(out, ":\n");
-      if (!i2r_IPAddressOrRanges(out,
-				 indent + 2,
-				 f->ipAddressChoice->u.addressesOrRanges,
-				 afi))
-	return 0;
-      break;
-    }
-  }
-  return 1;
-}
-
-/*
- * Sort comparison function for a sequence of IPAddressOrRange
- * elements.
- */
-static int IPAddressOrRange_cmp(const IPAddressOrRange *a,
-				const IPAddressOrRange *b,
-				const int length)
-{
-  unsigned char addr_a[ADDR_RAW_BUF_LEN], addr_b[ADDR_RAW_BUF_LEN];
-  int prefixlen_a = 0;
-  int prefixlen_b = 0;
-  int r;
-
-  switch (a->type) {
-  case IPAddressOrRange_addressPrefix:
-    addr_expand(addr_a, a->u.addressPrefix, length, 0x00);
-    prefixlen_a = addr_prefixlen(a->u.addressPrefix);
-    break;
-  case IPAddressOrRange_addressRange:
-    addr_expand(addr_a, a->u.addressRange->min, length, 0x00);
-    prefixlen_a = length * 8;
-    break;
-  }
-
-  switch (b->type) {
-  case IPAddressOrRange_addressPrefix:
-    addr_expand(addr_b, b->u.addressPrefix, length, 0x00);
-    prefixlen_b = addr_prefixlen(b->u.addressPrefix);
-    break;
-  case IPAddressOrRange_addressRange:
-    addr_expand(addr_b, b->u.addressRange->min, length, 0x00);
-    prefixlen_b = length * 8;
-    break;
-  }
-
-  if ((r = memcmp(addr_a, addr_b, length)) != 0)
-    return r;
-  else
-    return prefixlen_a - prefixlen_b;
-}
-
-/*
- * IPv4-specific closure over IPAddressOrRange_cmp, since sk_sort()
- * comparision routines are only allowed two arguments.
- */
-static int v4IPAddressOrRange_cmp(const IPAddressOrRange * const *a,
-				  const IPAddressOrRange * const *b)
-{
-  return IPAddressOrRange_cmp(*a, *b, 4);
-}
-
-/*
- * IPv6-specific closure over IPAddressOrRange_cmp, since sk_sort()
- * comparision routines are only allowed two arguments.
- */
-static int v6IPAddressOrRange_cmp(const IPAddressOrRange * const *a,
-				  const IPAddressOrRange * const *b)
-{
-  return IPAddressOrRange_cmp(*a, *b, 16);
-}
-
-/*
- * Calculate whether a range collapses to a prefix.
- * See last paragraph of RFC 3779 2.2.3.7.
- */
-static int range_should_be_prefix(const unsigned char *min,
-				  const unsigned char *max,
-				  const int length)
-{
-  unsigned char mask;
-  int i, j;
-
-  for (i = 0; i < length && min[i] == max[i]; i++)
-    ;
-  for (j = length - 1; j >= 0 && min[j] == 0x00 && max[j] == 0xFF; j--)
-    ;
-  if (i < j)
-    return -1;
-  if (i > j)
-    return i * 8;
-  mask = min[i] ^ max[i];
-  switch (mask) {
-  case 0x01: j = 7; break;
-  case 0x03: j = 6; break;
-  case 0x07: j = 5; break;
-  case 0x0F: j = 4; break;
-  case 0x1F: j = 3; break;
-  case 0x3F: j = 2; break;
-  case 0x7F: j = 1; break;
-  default:   return -1;
-  }
-  if ((min[i] & mask) != 0 || (max[i] & mask) != mask)
-    return -1;
-  else
-    return i * 8 + j;
-}
-
-/*
- * Construct a prefix.
- */
-static int make_addressPrefix(IPAddressOrRange **result,
-			      unsigned char *addr,
-			      const int prefixlen)
-{
-  int bytelen = (prefixlen + 7) / 8, bitlen = prefixlen % 8;
-  IPAddressOrRange *aor = IPAddressOrRange_new();
-
-  if (aor == NULL)
-    return 0;
-  aor->type = IPAddressOrRange_addressPrefix;
-  if (aor->u.addressPrefix == NULL &&
-      (aor->u.addressPrefix = ASN1_BIT_STRING_new()) == NULL)
-    goto err;
-  if (!ASN1_BIT_STRING_set(aor->u.addressPrefix, addr, bytelen))
-    goto err;
-  aor->u.addressPrefix->flags &= ~7;
-  aor->u.addressPrefix->flags |= ASN1_STRING_FLAG_BITS_LEFT;
-  if (bitlen > 0) {
-    aor->u.addressPrefix->data[bytelen - 1] &= ~(0xFF >> bitlen);
-    aor->u.addressPrefix->flags |= 8 - bitlen;
-  }
-  
-  *result = aor;
-  return 1;
-
- err:
-  IPAddressOrRange_free(aor);
-  return 0;
-}
-
-/*
- * Construct a range.  If it can be expressed as a prefix,
- * return a prefix instead.  Doing this here simplifies
- * the rest of the code considerably.
- */
-static int make_addressRange(IPAddressOrRange **result,
-			     unsigned char *min,
-			     unsigned char *max,
-			     const int length)
-{
-  IPAddressOrRange *aor;
-  int i, prefixlen;
-
-  if ((prefixlen = range_should_be_prefix(min, max, length)) >= 0)
-    return make_addressPrefix(result, min, prefixlen);
-
-  if ((aor = IPAddressOrRange_new()) == NULL)
-    return 0;
-  aor->type = IPAddressOrRange_addressRange;
-  assert(aor->u.addressRange == NULL);
-  if ((aor->u.addressRange = IPAddressRange_new()) == NULL)
-    goto err;
-  if (aor->u.addressRange->min == NULL &&
-      (aor->u.addressRange->min = ASN1_BIT_STRING_new()) == NULL)
-    goto err;
-  if (aor->u.addressRange->max == NULL &&
-      (aor->u.addressRange->max = ASN1_BIT_STRING_new()) == NULL)
-    goto err;
-
-  for (i = length; i > 0 && min[i - 1] == 0x00; --i)
-    ;
-  if (!ASN1_BIT_STRING_set(aor->u.addressRange->min, min, i))
-    goto err;
-  aor->u.addressRange->min->flags &= ~7;
-  aor->u.addressRange->min->flags |= ASN1_STRING_FLAG_BITS_LEFT;
-  if (i > 0) {
-    unsigned char b = min[i - 1];
-    int j = 1;
-    while ((b & (0xFFU >> j)) != 0) 
-      ++j;
-    aor->u.addressRange->min->flags |= 8 - j;
-  }
-
-  for (i = length; i > 0 && max[i - 1] == 0xFF; --i)
-    ;
-  if (!ASN1_BIT_STRING_set(aor->u.addressRange->max, max, i))
-    goto err;
-  aor->u.addressRange->max->flags &= ~7;
-  aor->u.addressRange->max->flags |= ASN1_STRING_FLAG_BITS_LEFT;
-  if (i > 0) {
-    unsigned char b = max[i - 1];
-    int j = 1;
-    while ((b & (0xFFU >> j)) != (0xFFU >> j))
-      ++j;
-    aor->u.addressRange->max->flags |= 8 - j;
-  }
-
-  *result = aor;
-  return 1;
-
- err:
-  IPAddressOrRange_free(aor);
-  return 0;
-}
-
-/*
- * Construct a new address family or find an existing one.
- */
-static IPAddressFamily *make_IPAddressFamily(IPAddrBlocks *addr,
-					     const unsigned afi,
-					     const unsigned *safi)
-{
-  IPAddressFamily *f;
-  unsigned char key[3];
-  unsigned keylen;
-  int i;
-
-  key[0] = (afi >> 8) & 0xFF;
-  key[1] = afi & 0xFF;
-  if (safi != NULL) {
-    key[2] = *safi & 0xFF;
-    keylen = 3;
-  } else {
-    keylen = 2;
-  }
-
-  for (i = 0; i < sk_IPAddressFamily_num(addr); i++) {
-    f = sk_IPAddressFamily_value(addr, i);
-    assert(f->addressFamily->data != NULL);
-    if (f->addressFamily->length == keylen &&
-	!memcmp(f->addressFamily->data, key, keylen))
-      return f;
-  }
-
-  if ((f = IPAddressFamily_new()) == NULL)
-    goto err;
-  if (f->ipAddressChoice == NULL &&
-      (f->ipAddressChoice = IPAddressChoice_new()) == NULL)
-    goto err;
-  if (f->addressFamily == NULL && 
-      (f->addressFamily = ASN1_OCTET_STRING_new()) == NULL)
-    goto err;
-  if (!ASN1_OCTET_STRING_set(f->addressFamily, key, keylen))
-    goto err;
-  if (!sk_IPAddressFamily_push(addr, f))
-    goto err;
-
-  return f;
-
- err:
-  IPAddressFamily_free(f);
-  return NULL;
-}
-
-/*
- * Add an inheritance element.
- */
-int v3_addr_add_inherit(IPAddrBlocks *addr,
-			const unsigned afi,
-			const unsigned *safi)
-{
-  IPAddressFamily *f = make_IPAddressFamily(addr, afi, safi);
-  if (f == NULL ||
-      f->ipAddressChoice == NULL ||
-      (f->ipAddressChoice->type == IPAddressChoice_addressesOrRanges &&
-       f->ipAddressChoice->u.addressesOrRanges != NULL))
-    return 0;
-  if (f->ipAddressChoice->type == IPAddressChoice_inherit &&
-      f->ipAddressChoice->u.inherit != NULL)
-    return 1;
-  if (f->ipAddressChoice->u.inherit == NULL &&
-      (f->ipAddressChoice->u.inherit = ASN1_NULL_new()) == NULL)
-    return 0;
-  f->ipAddressChoice->type = IPAddressChoice_inherit;
-  return 1;
-}
-
-/*
- * Construct an IPAddressOrRange sequence, or return an existing one.
- */
-static IPAddressOrRanges *make_prefix_or_range(IPAddrBlocks *addr,
-					       const unsigned afi,
-					       const unsigned *safi)
-{
-  IPAddressFamily *f = make_IPAddressFamily(addr, afi, safi);
-  IPAddressOrRanges *aors = NULL;
-
-  if (f == NULL ||
-      f->ipAddressChoice == NULL ||
-      (f->ipAddressChoice->type == IPAddressChoice_inherit &&
-       f->ipAddressChoice->u.inherit != NULL))
-    return NULL;
-  if (f->ipAddressChoice->type == IPAddressChoice_addressesOrRanges)
-    aors = f->ipAddressChoice->u.addressesOrRanges;
-  if (aors != NULL)
-    return aors;
-  if ((aors = sk_IPAddressOrRange_new_null()) == NULL)
-    return NULL;
-  switch (afi) {
-  case IANA_AFI_IPV4:
-    sk_IPAddressOrRange_set_cmp_func(aors, v4IPAddressOrRange_cmp);
-    break;
-  case IANA_AFI_IPV6:
-    sk_IPAddressOrRange_set_cmp_func(aors, v6IPAddressOrRange_cmp);
-    break;
-  }
-  f->ipAddressChoice->type = IPAddressChoice_addressesOrRanges;
-  f->ipAddressChoice->u.addressesOrRanges = aors;
-  return aors;
-}
-
-/*
- * Add a prefix.
- */
-int v3_addr_add_prefix(IPAddrBlocks *addr,
-		       const unsigned afi,
-		       const unsigned *safi,
-		       unsigned char *a,
-		       const int prefixlen)
-{
-  IPAddressOrRanges *aors = make_prefix_or_range(addr, afi, safi);
-  IPAddressOrRange *aor;
-  if (aors == NULL || !make_addressPrefix(&aor, a, prefixlen))
-    return 0;
-  if (sk_IPAddressOrRange_push(aors, aor))
-    return 1;
-  IPAddressOrRange_free(aor);
-  return 0;
-}
-
-/*
- * Add a range.
- */
-int v3_addr_add_range(IPAddrBlocks *addr,
-		      const unsigned afi,
-		      const unsigned *safi,
-		      unsigned char *min,
-		      unsigned char *max)
-{
-  IPAddressOrRanges *aors = make_prefix_or_range(addr, afi, safi);
-  IPAddressOrRange *aor;
-  int length = length_from_afi(afi);
-  if (aors == NULL)
-    return 0;
-  if (!make_addressRange(&aor, min, max, length))
-    return 0;
-  if (sk_IPAddressOrRange_push(aors, aor))
-    return 1;
-  IPAddressOrRange_free(aor);
-  return 0;
-}
-
-/*
- * Extract min and max values from an IPAddressOrRange.
- */
-static void extract_min_max(IPAddressOrRange *aor,
-			    unsigned char *min,
-			    unsigned char *max,
-			    int length)
-{
-  assert(aor != NULL && min != NULL && max != NULL);
-  switch (aor->type) {
-  case IPAddressOrRange_addressPrefix:
-    addr_expand(min, aor->u.addressPrefix, length, 0x00);
-    addr_expand(max, aor->u.addressPrefix, length, 0xFF);
-    return;
-  case IPAddressOrRange_addressRange:
-    addr_expand(min, aor->u.addressRange->min, length, 0x00);
-    addr_expand(max, aor->u.addressRange->max, length, 0xFF);
-    return;
-  }
-}
-
-/*
- * Public wrapper for extract_min_max().
- */
-int v3_addr_get_range(IPAddressOrRange *aor,
-		      const unsigned afi,
-		      unsigned char *min,
-		      unsigned char *max,
-		      const int length)
-{
-  int afi_length = length_from_afi(afi);
-  if (aor == NULL || min == NULL || max == NULL ||
-      afi_length == 0 || length < afi_length ||
-      (aor->type != IPAddressOrRange_addressPrefix &&
-       aor->type != IPAddressOrRange_addressRange))
-    return 0;
-  extract_min_max(aor, min, max, afi_length);
-  return afi_length;
-}
-
-/*
- * Sort comparision function for a sequence of IPAddressFamily.
- *
- * The last paragraph of RFC 3779 2.2.3.3 is slightly ambiguous about
- * the ordering: I can read it as meaning that IPv6 without a SAFI
- * comes before IPv4 with a SAFI, which seems pretty weird.  The
- * examples in appendix B suggest that the author intended the
- * null-SAFI rule to apply only within a single AFI, which is what I
- * would have expected and is what the following code implements.
- */
-static int IPAddressFamily_cmp(const IPAddressFamily * const *a_,
-			       const IPAddressFamily * const *b_)
-{
-  const ASN1_OCTET_STRING *a = (*a_)->addressFamily;
-  const ASN1_OCTET_STRING *b = (*b_)->addressFamily;
-  int len = ((a->length <= b->length) ? a->length : b->length);
-  int cmp = memcmp(a->data, b->data, len);
-  return cmp ? cmp : a->length - b->length;
-}
-
-/*
- * Check whether an IPAddrBLocks is in canonical form.
- */
-int v3_addr_is_canonical(IPAddrBlocks *addr)
-{
-  unsigned char a_min[ADDR_RAW_BUF_LEN], a_max[ADDR_RAW_BUF_LEN];
-  unsigned char b_min[ADDR_RAW_BUF_LEN], b_max[ADDR_RAW_BUF_LEN];
-  IPAddressOrRanges *aors;
-  int i, j, k;
-
-  /*
-   * Empty extension is cannonical.
-   */
-  if (addr == NULL)
-    return 1;
-
-  /*
-   * Check whether the top-level list is in order.
-   */
-  for (i = 0; i < sk_IPAddressFamily_num(addr) - 1; i++) {
-    const IPAddressFamily *a = sk_IPAddressFamily_value(addr, i);
-    const IPAddressFamily *b = sk_IPAddressFamily_value(addr, i + 1);
-    if (IPAddressFamily_cmp(&a, &b) >= 0)
-      return 0;
-  }
-
-  /*
-   * Top level's ok, now check each address family.
-   */
-  for (i = 0; i < sk_IPAddressFamily_num(addr); i++) {
-    IPAddressFamily *f = sk_IPAddressFamily_value(addr, i);
-    int length = length_from_afi(v3_addr_get_afi(f));
-
-    /*
-     * Inheritance is canonical.  Anything other than inheritance or
-     * a SEQUENCE OF IPAddressOrRange is an ASN.1 error or something.
-     */
-    if (f == NULL || f->ipAddressChoice == NULL)
-      return 0;
-    switch (f->ipAddressChoice->type) {
-    case IPAddressChoice_inherit:
-      continue;
-    case IPAddressChoice_addressesOrRanges:
-      break;
-    default:
-      return 0;
-    }
-
-    /*
-     * It's an IPAddressOrRanges sequence, check it.
-     */
-    aors = f->ipAddressChoice->u.addressesOrRanges;
-    if (sk_IPAddressOrRange_num(aors) == 0)
-      return 0;
-    for (j = 0; j < sk_IPAddressOrRange_num(aors) - 1; j++) {
-      IPAddressOrRange *a = sk_IPAddressOrRange_value(aors, j);
-      IPAddressOrRange *b = sk_IPAddressOrRange_value(aors, j + 1);
-
-      extract_min_max(a, a_min, a_max, length);
-      extract_min_max(b, b_min, b_max, length);
-
-      /*
-       * Punt misordered list, overlapping start, or inverted range.
-       */
-      if (memcmp(a_min, b_min, length) >= 0 ||
-	  memcmp(a_min, a_max, length) > 0 ||
-	  memcmp(b_min, b_max, length) > 0)
-	return 0;
-
-      /*
-       * Punt if adjacent or overlapping.  Check for adjacency by
-       * subtracting one from b_min first.
-       */
-      for (k = length - 1; k >= 0 && b_min[k]-- == 0x00; k--)
-	;
-      if (memcmp(a_max, b_min, length) >= 0)
-	return 0;
-
-      /*
-       * Check for range that should be expressed as a prefix.
-       */
-      if (a->type == IPAddressOrRange_addressRange &&
-	  range_should_be_prefix(a_min, a_max, length) >= 0)
-	return 0;
-    }
-
-    /*
-     * Check final range to see if it should be a prefix.
-     */
-    j = sk_IPAddressOrRange_num(aors) - 1;
-    {
-      IPAddressOrRange *a = sk_IPAddressOrRange_value(aors, j);
-      if (a->type == IPAddressOrRange_addressRange) {
-	extract_min_max(a, a_min, a_max, length);
-	if (range_should_be_prefix(a_min, a_max, length) >= 0)
-	  return 0;
-      }
-    }
-  }
-
-  /*
-   * If we made it through all that, we're happy.
-   */
-  return 1;
-}
-
-/*
- * Whack an IPAddressOrRanges into canonical form.
- */
-static int IPAddressOrRanges_canonize(IPAddressOrRanges *aors,
-				      const unsigned afi)
-{
-  int i, j, length = length_from_afi(afi);
-
-  /*
-   * Sort the IPAddressOrRanges sequence.
-   */
-  sk_IPAddressOrRange_sort(aors);
-
-  /*
-   * Clean up representation issues, punt on duplicates or overlaps.
-   */
-  for (i = 0; i < sk_IPAddressOrRange_num(aors) - 1; i++) {
-    IPAddressOrRange *a = sk_IPAddressOrRange_value(aors, i);
-    IPAddressOrRange *b = sk_IPAddressOrRange_value(aors, i + 1);
-    unsigned char a_min[ADDR_RAW_BUF_LEN], a_max[ADDR_RAW_BUF_LEN];
-    unsigned char b_min[ADDR_RAW_BUF_LEN], b_max[ADDR_RAW_BUF_LEN];
-
-    extract_min_max(a, a_min, a_max, length);
-    extract_min_max(b, b_min, b_max, length);
-
-    /*
-     * Punt overlaps.
-     */
-    if (memcmp(a_max, b_min, length) >= 0)
-      return 0;
-
-    /*
-     * Merge if a and b are adjacent.  We check for
-     * adjacency by subtracting one from b_min first.
-     */
-    for (j = length - 1; j >= 0 && b_min[j]-- == 0x00; j--)
-      ;
-    if (memcmp(a_max, b_min, length) == 0) {
-      IPAddressOrRange *merged;
-      if (!make_addressRange(&merged, a_min, b_max, length))
-	return 0;
-      sk_IPAddressOrRange_set(aors, i, merged);
-      sk_IPAddressOrRange_delete(aors, i + 1);
-      IPAddressOrRange_free(a);
-      IPAddressOrRange_free(b);
-      --i;
-      continue;
-    }
-  }
-
-  return 1;
-}
-
-/*
- * Whack an IPAddrBlocks extension into canonical form.
- */
-int v3_addr_canonize(IPAddrBlocks *addr)
-{
-  int i;
-  for (i = 0; i < sk_IPAddressFamily_num(addr); i++) {
-    IPAddressFamily *f = sk_IPAddressFamily_value(addr, i);
-    if (f->ipAddressChoice->type == IPAddressChoice_addressesOrRanges &&
-	!IPAddressOrRanges_canonize(f->ipAddressChoice->u.addressesOrRanges,
-				    v3_addr_get_afi(f)))
-      return 0;
-  }
-  sk_IPAddressFamily_sort(addr);
-  assert(v3_addr_is_canonical(addr));
-  return 1;
-}
-
-/*
- * v2i handler for the IPAddrBlocks extension.
- */
-static void *v2i_IPAddrBlocks(struct v3_ext_method *method,
-			      struct v3_ext_ctx *ctx,
-			      STACK_OF(CONF_VALUE) *values)
-{
-  static const char v4addr_chars[] = "0123456789.";
-  static const char v6addr_chars[] = "0123456789.:abcdefABCDEF";
-  IPAddrBlocks *addr = NULL;
-  char *s = NULL, *t;
-  int i;
-  
-  if ((addr = sk_IPAddressFamily_new(IPAddressFamily_cmp)) == NULL) {
-    X509V3err(X509V3_F_V2I_IPADDRBLOCKS, ERR_R_MALLOC_FAILURE);
-    return NULL;
-  }
-
-  for (i = 0; i < sk_CONF_VALUE_num(values); i++) {
-    CONF_VALUE *val = sk_CONF_VALUE_value(values, i);
-    unsigned char min[ADDR_RAW_BUF_LEN], max[ADDR_RAW_BUF_LEN];
-    unsigned afi, *safi = NULL, safi_;
-    const char *addr_chars;
-    int prefixlen, i1, i2, delim, length;
-
-    if (       !name_cmp(val->name, "IPv4")) {
-      afi = IANA_AFI_IPV4;
-    } else if (!name_cmp(val->name, "IPv6")) {
-      afi = IANA_AFI_IPV6;
-    } else if (!name_cmp(val->name, "IPv4-SAFI")) {
-      afi = IANA_AFI_IPV4;
-      safi = &safi_;
-    } else if (!name_cmp(val->name, "IPv6-SAFI")) {
-      afi = IANA_AFI_IPV6;
-      safi = &safi_;
-    } else {
-      X509V3err(X509V3_F_V2I_IPADDRBLOCKS, X509V3_R_EXTENSION_NAME_ERROR);
-      X509V3_conf_err(val);
-      goto err;
-    }
-
-    switch (afi) {
-    case IANA_AFI_IPV4:
-      addr_chars = v4addr_chars;
-      break;
-    case IANA_AFI_IPV6:
-      addr_chars = v6addr_chars;
-      break;
-    }
-
-    length = length_from_afi(afi);
-
-    /*
-     * Handle SAFI, if any, and BUF_strdup() so we can null-terminate
-     * the other input values.
-     */
-    if (safi != NULL) {
-      *safi = strtoul(val->value, &t, 0);
-      t += strspn(t, " \t");
-      if (*safi > 0xFF || *t++ != ':') {
-	X509V3err(X509V3_F_V2I_IPADDRBLOCKS, X509V3_R_INVALID_SAFI);
-	X509V3_conf_err(val);
-	goto err;
-      }
-      t += strspn(t, " \t");
-      s = BUF_strdup(t);
-    } else {
-      s = BUF_strdup(val->value);
-    }
-    if (s == NULL) {
-      X509V3err(X509V3_F_V2I_IPADDRBLOCKS, ERR_R_MALLOC_FAILURE);
-      goto err;
-    }
-
-    /*
-     * Check for inheritance.  Not worth additional complexity to
-     * optimize this (seldom-used) case.
-     */
-    if (!strcmp(s, "inherit")) {
-      if (!v3_addr_add_inherit(addr, afi, safi)) {
-	X509V3err(X509V3_F_V2I_IPADDRBLOCKS, X509V3_R_INVALID_INHERITANCE);
-	X509V3_conf_err(val);
-	goto err;
-      }
-      OPENSSL_free(s);
-      s = NULL;
-      continue;
-    }
-
-    i1 = strspn(s, addr_chars);
-    i2 = i1 + strspn(s + i1, " \t");
-    delim = s[i2++];
-    s[i1] = '\0';
-
-    if (a2i_ipadd(min, s) != length) {
-      X509V3err(X509V3_F_V2I_IPADDRBLOCKS, X509V3_R_INVALID_IPADDRESS);
-      X509V3_conf_err(val);
-      goto err;
-    }
-
-    switch (delim) {
-    case '/':
-      prefixlen = (int) strtoul(s + i2, &t, 10);
-      if (t == s + i2 || *t != '\0') {
-	X509V3err(X509V3_F_V2I_IPADDRBLOCKS, X509V3_R_EXTENSION_VALUE_ERROR);
-	X509V3_conf_err(val);
-	goto err;
-      }
-      if (!v3_addr_add_prefix(addr, afi, safi, min, prefixlen)) {
-	X509V3err(X509V3_F_V2I_IPADDRBLOCKS, ERR_R_MALLOC_FAILURE);
-	goto err;
-      }
-      break;
-    case '-':
-      i1 = i2 + strspn(s + i2, " \t");
-      i2 = i1 + strspn(s + i1, addr_chars);
-      if (i1 == i2 || s[i2] != '\0') {
-	X509V3err(X509V3_F_V2I_IPADDRBLOCKS, X509V3_R_EXTENSION_VALUE_ERROR);
-	X509V3_conf_err(val);
-	goto err;
-      }
-      if (a2i_ipadd(max, s + i1) != length) {
-	X509V3err(X509V3_F_V2I_IPADDRBLOCKS, X509V3_R_INVALID_IPADDRESS);
-	X509V3_conf_err(val);
-	goto err;
-      }
-      if (!v3_addr_add_range(addr, afi, safi, min, max)) {
-	X509V3err(X509V3_F_V2I_IPADDRBLOCKS, ERR_R_MALLOC_FAILURE);
-	goto err;
-      }
-      break;
-    case '\0':
-      if (!v3_addr_add_prefix(addr, afi, safi, min, length * 8)) {
-	X509V3err(X509V3_F_V2I_IPADDRBLOCKS, ERR_R_MALLOC_FAILURE);
-	goto err;
-      }
-      break;
-    default:
-      X509V3err(X509V3_F_V2I_IPADDRBLOCKS, X509V3_R_EXTENSION_VALUE_ERROR);
-      X509V3_conf_err(val);
-      goto err;
-    }
-
-    OPENSSL_free(s);
-    s = NULL;
-  }
-
-  /*
-   * Canonize the result, then we're done.
-   */
-  if (!v3_addr_canonize(addr))
-    goto err;    
-  return addr;
-
- err:
-  OPENSSL_free(s);
-  sk_IPAddressFamily_pop_free(addr, IPAddressFamily_free);
-  return NULL;
-}
-
-/*
- * OpenSSL dispatch
- */
-const X509V3_EXT_METHOD v3_addr = {
-  NID_sbgp_ipAddrBlock,		/* nid */
-  0,				/* flags */
-  ASN1_ITEM_ref(IPAddrBlocks),	/* template */
-  0, 0, 0, 0,			/* old functions, ignored */
-  0,				/* i2s */
-  0,				/* s2i */
-  0,				/* i2v */
-  v2i_IPAddrBlocks,		/* v2i */
-  i2r_IPAddrBlocks,		/* i2r */
-  0,				/* r2i */
-  NULL				/* extension-specific data */
-};
-
-/*
- * Figure out whether extension sues inheritance.
- */
-int v3_addr_inherits(IPAddrBlocks *addr)
-{
-  int i;
-  if (addr == NULL)
-    return 0;
-  for (i = 0; i < sk_IPAddressFamily_num(addr); i++) {
-    IPAddressFamily *f = sk_IPAddressFamily_value(addr, i);
-    if (f->ipAddressChoice->type == IPAddressChoice_inherit)
-      return 1;
-  }
-  return 0;
-}
-
-/*
- * Figure out whether parent contains child.
- */
-static int addr_contains(IPAddressOrRanges *parent,
-			 IPAddressOrRanges *child,
-			 int length)
-{
-  unsigned char p_min[ADDR_RAW_BUF_LEN], p_max[ADDR_RAW_BUF_LEN];
-  unsigned char c_min[ADDR_RAW_BUF_LEN], c_max[ADDR_RAW_BUF_LEN];
-  int p, c;
-
-  if (child == NULL || parent == child)
-    return 1;
-  if (parent == NULL)
-    return 0;
-
-  p = 0;
-  for (c = 0; c < sk_IPAddressOrRange_num(child); c++) {
-    extract_min_max(sk_IPAddressOrRange_value(child, c),
-		    c_min, c_max, length);
-    for (;; p++) {
-      if (p >= sk_IPAddressOrRange_num(parent))
-	return 0;
-      extract_min_max(sk_IPAddressOrRange_value(parent, p),
-		      p_min, p_max, length);
-      if (memcmp(p_max, c_max, length) < 0)
-	continue;
-      if (memcmp(p_min, c_min, length) > 0)
-	return 0;
-      break;
-    }
-  }
-
-  return 1;
-}
-
-/*
- * Test whether a is a subset of b.
- */
-int v3_addr_subset(IPAddrBlocks *a, IPAddrBlocks *b)
-{
-  int i;
-  if (a == NULL || a == b)
-    return 1;
-  if (b == NULL || v3_addr_inherits(a) || v3_addr_inherits(b))
-    return 0;
-  sk_IPAddressFamily_set_cmp_func(b, IPAddressFamily_cmp);
-  for (i = 0; i < sk_IPAddressFamily_num(a); i++) {
-    IPAddressFamily *fa = sk_IPAddressFamily_value(a, i);
-    int j = sk_IPAddressFamily_find(b, fa);
-    IPAddressFamily *fb = sk_IPAddressFamily_value(b, j);
-    if (!addr_contains(fb->ipAddressChoice->u.addressesOrRanges, 
-		       fa->ipAddressChoice->u.addressesOrRanges,
-		       length_from_afi(v3_addr_get_afi(fb))))
-      return 0;
-  }
-  return 1;
-}
-
-/*
- * Validation error handling via callback.
- */
-#define validation_err(_err_)		\
-  do {					\
-    if (ctx != NULL) {			\
-      ctx->error = _err_;		\
-      ctx->error_depth = i;		\
-      ctx->current_cert = x;		\
-      ret = ctx->verify_cb(0, ctx);	\
-    } else {				\
-      ret = 0;				\
-    }					\
-    if (!ret)				\
-      goto done;			\
-  } while (0)
-
-/*
- * Core code for RFC 3779 2.3 path validation.
- */
-static int v3_addr_validate_path_internal(X509_STORE_CTX *ctx,
-					  STACK_OF(X509) *chain,
-					  IPAddrBlocks *ext)
-{
-  IPAddrBlocks *child = NULL;
-  int i, j, ret = 1;
-  X509 *x = NULL;
-
-  assert(chain != NULL && sk_X509_num(chain) > 0);
-  assert(ctx != NULL || ext != NULL);
-  assert(ctx == NULL || ctx->verify_cb != NULL);
-
-  /*
-   * Figure out where to start.  If we don't have an extension to
-   * check, we're done.  Otherwise, check canonical form and
-   * set up for walking up the chain.
-   */
-  if (ext != NULL) {
-    i = -1;
-  } else {
-    i = 0;
-    x = sk_X509_value(chain, i);
-    assert(x != NULL);
-    if ((ext = x->rfc3779_addr) == NULL)
-      goto done;
-  }
-  if (!v3_addr_is_canonical(ext))
-    validation_err(X509_V_ERR_INVALID_EXTENSION);
-  sk_IPAddressFamily_set_cmp_func(ext, IPAddressFamily_cmp);
-  if ((child = sk_IPAddressFamily_dup(ext)) == NULL) {
-    X509V3err(X509V3_F_V3_ADDR_VALIDATE_PATH_INTERNAL, ERR_R_MALLOC_FAILURE);
-    ret = 0;
-    goto done;
-  }
-
-  /*
-   * Now walk up the chain.  No cert may list resources that its
-   * parent doesn't list.
-   */
-  for (i++; i < sk_X509_num(chain); i++) {
-    x = sk_X509_value(chain, i);
-    assert(x != NULL);
-    if (!v3_addr_is_canonical(x->rfc3779_addr))
-      validation_err(X509_V_ERR_INVALID_EXTENSION);
-    if (x->rfc3779_addr == NULL) {
-      for (j = 0; j < sk_IPAddressFamily_num(child); j++) {
-	IPAddressFamily *fc = sk_IPAddressFamily_value(child, j);
-	if (fc->ipAddressChoice->type != IPAddressChoice_inherit) {
-	  validation_err(X509_V_ERR_UNNESTED_RESOURCE);
-	  break;
-	}
-      }
-      continue;
-    }
-    sk_IPAddressFamily_set_cmp_func(x->rfc3779_addr, IPAddressFamily_cmp);
-    for (j = 0; j < sk_IPAddressFamily_num(child); j++) {
-      IPAddressFamily *fc = sk_IPAddressFamily_value(child, j);
-      int k = sk_IPAddressFamily_find(x->rfc3779_addr, fc);
-      IPAddressFamily *fp = sk_IPAddressFamily_value(x->rfc3779_addr, k);
-      if (fp == NULL) {
-	if (fc->ipAddressChoice->type == IPAddressChoice_addressesOrRanges) {
-	  validation_err(X509_V_ERR_UNNESTED_RESOURCE);
-	  break;
-	}
-	continue;
-      }
-      if (fp->ipAddressChoice->type == IPAddressChoice_addressesOrRanges) {
-	if (fc->ipAddressChoice->type == IPAddressChoice_inherit ||
-	    addr_contains(fp->ipAddressChoice->u.addressesOrRanges, 
-			  fc->ipAddressChoice->u.addressesOrRanges,
-			  length_from_afi(v3_addr_get_afi(fc))))
-	  sk_IPAddressFamily_set(child, j, fp);
-	else
-	  validation_err(X509_V_ERR_UNNESTED_RESOURCE);
-      }
-    }
-  }
-
-  /*
-   * Trust anchor can't inherit.
-   */
-  if (x->rfc3779_addr != NULL) {
-    for (j = 0; j < sk_IPAddressFamily_num(x->rfc3779_addr); j++) {
-      IPAddressFamily *fp = sk_IPAddressFamily_value(x->rfc3779_addr, j);
-      if (fp->ipAddressChoice->type == IPAddressChoice_inherit &&
-	  sk_IPAddressFamily_find(child, fp) >= 0)
-	validation_err(X509_V_ERR_UNNESTED_RESOURCE);
-    }
-  }
-
- done:
-  sk_IPAddressFamily_free(child);
-  return ret;
-}
-
-#undef validation_err
-
-/*
- * RFC 3779 2.3 path validation -- called from X509_verify_cert().
- */
-int v3_addr_validate_path(X509_STORE_CTX *ctx)
-{
-  return v3_addr_validate_path_internal(ctx, ctx->chain, NULL);
-}
-
-/*
- * RFC 3779 2.3 path validation of an extension.
- * Test whether chain covers extension.
- */
-int v3_addr_validate_resource_set(STACK_OF(X509) *chain,
-				  IPAddrBlocks *ext,
-				  int allow_inheritance)
-{
-  if (ext == NULL)
-    return 1;
-  if (chain == NULL || sk_X509_num(chain) == 0)
-    return 0;
-  if (!allow_inheritance && v3_addr_inherits(ext))
-    return 0;
-  return v3_addr_validate_path_internal(NULL, chain, ext);
-}
-
-#endif /* OPENSSL_NO_RFC3779 */
diff --git a/crypto/openssl/crypto/x509v3/v3_akey.c b/crypto/openssl/crypto/x509v3/v3_akey.c
deleted file mode 100644
index ac0548b7751b..000000000000
--- a/crypto/openssl/crypto/x509v3/v3_akey.c
+++ /dev/null
@@ -1,208 +0,0 @@
-/* v3_akey.c */
-/* Written by Dr Stephen N Henson (shenson@bigfoot.com) for the OpenSSL
- * project 1999.
- */
-/* ====================================================================
- * Copyright (c) 1999 The OpenSSL Project.  All rights reserved.
- *
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions
- * are met:
- *
- * 1. Redistributions of source code must retain the above copyright
- *    notice, this list of conditions and the following disclaimer. 
- *
- * 2. Redistributions in binary form must reproduce the above copyright
- *    notice, this list of conditions and the following disclaimer in
- *    the documentation and/or other materials provided with the
- *    distribution.
- *
- * 3. All advertising materials mentioning features or use of this
- *    software must display the following acknowledgment:
- *    "This product includes software developed by the OpenSSL Project
- *    for use in the OpenSSL Toolkit. (http://www.OpenSSL.org/)"
- *
- * 4. The names "OpenSSL Toolkit" and "OpenSSL Project" must not be used to
- *    endorse or promote products derived from this software without
- *    prior written permission. For written permission, please contact
- *    licensing@OpenSSL.org.
- *
- * 5. Products derived from this software may not be called "OpenSSL"
- *    nor may "OpenSSL" appear in their names without prior written
- *    permission of the OpenSSL Project.
- *
- * 6. Redistributions of any form whatsoever must retain the following
- *    acknowledgment:
- *    "This product includes software developed by the OpenSSL Project
- *    for use in the OpenSSL Toolkit (http://www.OpenSSL.org/)"
- *
- * THIS SOFTWARE IS PROVIDED BY THE OpenSSL PROJECT ``AS IS'' AND ANY
- * EXPRESSED OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
- * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR
- * PURPOSE ARE DISCLAIMED.  IN NO EVENT SHALL THE OpenSSL PROJECT OR
- * ITS CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
- * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
- * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
- * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
- * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
- * STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
- * ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED
- * OF THE POSSIBILITY OF SUCH DAMAGE.
- * ====================================================================
- *
- * This product includes cryptographic software written by Eric Young
- * (eay@cryptsoft.com).  This product includes software written by Tim
- * Hudson (tjh@cryptsoft.com).
- *
- */
-
-#include <stdio.h>
-#include "cryptlib.h"
-#include <openssl/conf.h>
-#include <openssl/asn1.h>
-#include <openssl/asn1t.h>
-#include <openssl/x509v3.h>
-
-static STACK_OF(CONF_VALUE) *i2v_AUTHORITY_KEYID(X509V3_EXT_METHOD *method,
-			AUTHORITY_KEYID *akeyid, STACK_OF(CONF_VALUE) *extlist);
-static AUTHORITY_KEYID *v2i_AUTHORITY_KEYID(X509V3_EXT_METHOD *method,
-			X509V3_CTX *ctx, STACK_OF(CONF_VALUE) *values);
-
-const X509V3_EXT_METHOD v3_akey_id =
-	{
-	NID_authority_key_identifier,
-	X509V3_EXT_MULTILINE, ASN1_ITEM_ref(AUTHORITY_KEYID),
-	0,0,0,0,
-	0,0,
-	(X509V3_EXT_I2V)i2v_AUTHORITY_KEYID,
-	(X509V3_EXT_V2I)v2i_AUTHORITY_KEYID,
-	0,0,
-	NULL
-	};
-
-static STACK_OF(CONF_VALUE) *i2v_AUTHORITY_KEYID(X509V3_EXT_METHOD *method,
-	     AUTHORITY_KEYID *akeyid, STACK_OF(CONF_VALUE) *extlist)
-{
-	char *tmp;
-	if(akeyid->keyid) {
-		tmp = hex_to_string(akeyid->keyid->data, akeyid->keyid->length);
-		X509V3_add_value("keyid", tmp, &extlist);
-		OPENSSL_free(tmp);
-	}
-	if(akeyid->issuer) 
-		extlist = i2v_GENERAL_NAMES(NULL, akeyid->issuer, extlist);
-	if(akeyid->serial) {
-		tmp = hex_to_string(akeyid->serial->data,
-						 akeyid->serial->length);
-		X509V3_add_value("serial", tmp, &extlist);
-		OPENSSL_free(tmp);
-	}
-	return extlist;
-}
-
-/* Currently two options:
- * keyid: use the issuers subject keyid, the value 'always' means its is
- * an error if the issuer certificate doesn't have a key id.
- * issuer: use the issuers cert issuer and serial number. The default is
- * to only use this if keyid is not present. With the option 'always'
- * this is always included.
- */
-
-static AUTHORITY_KEYID *v2i_AUTHORITY_KEYID(X509V3_EXT_METHOD *method,
-	     X509V3_CTX *ctx, STACK_OF(CONF_VALUE) *values)
-	{
-	char keyid=0, issuer=0;
-	int i;
-	CONF_VALUE *cnf;
-	ASN1_OCTET_STRING *ikeyid = NULL;
-	X509_NAME *isname = NULL;
-	GENERAL_NAMES * gens = NULL;
-	GENERAL_NAME *gen = NULL;
-	ASN1_INTEGER *serial = NULL;
-	X509_EXTENSION *ext;
-	X509 *cert;
-	AUTHORITY_KEYID *akeyid;
-
-	for(i = 0; i < sk_CONF_VALUE_num(values); i++)
-		{
-		cnf = sk_CONF_VALUE_value(values, i);
-		if(!strcmp(cnf->name, "keyid"))
-			{
-			keyid = 1;
-			if(cnf->value && !strcmp(cnf->value, "always"))
-				keyid = 2;
-			}
-		else if(!strcmp(cnf->name, "issuer"))
-			{
-			issuer = 1;
-			if(cnf->value && !strcmp(cnf->value, "always"))
-				issuer = 2;
-			}
-		else
-			{
-			X509V3err(X509V3_F_V2I_AUTHORITY_KEYID,X509V3_R_UNKNOWN_OPTION);
-			ERR_add_error_data(2, "name=", cnf->name);
-			return NULL;
-			}
-		}
-
-	if(!ctx || !ctx->issuer_cert)
-		{
-		if(ctx && (ctx->flags==CTX_TEST))
-			return AUTHORITY_KEYID_new();
-		X509V3err(X509V3_F_V2I_AUTHORITY_KEYID,X509V3_R_NO_ISSUER_CERTIFICATE);
-		return NULL;
-		}
-
-	cert = ctx->issuer_cert;
-
-	if(keyid)
-		{
-		i = X509_get_ext_by_NID(cert, NID_subject_key_identifier, -1);
-		if((i >= 0)  && (ext = X509_get_ext(cert, i)))
-			ikeyid = X509V3_EXT_d2i(ext);
-		if(keyid==2 && !ikeyid)
-			{
-			X509V3err(X509V3_F_V2I_AUTHORITY_KEYID,X509V3_R_UNABLE_TO_GET_ISSUER_KEYID);
-			return NULL;
-			}
-		}
-
-	if((issuer && !ikeyid) || (issuer == 2))
-		{
-		isname = X509_NAME_dup(X509_get_issuer_name(cert));
-		serial = M_ASN1_INTEGER_dup(X509_get_serialNumber(cert));
-		if(!isname || !serial)
-			{
-			X509V3err(X509V3_F_V2I_AUTHORITY_KEYID,X509V3_R_UNABLE_TO_GET_ISSUER_DETAILS);
-			goto err;
-			}
-		}
-
-	if(!(akeyid = AUTHORITY_KEYID_new())) goto err;
-
-	if(isname)
-		{
-		if(!(gens = sk_GENERAL_NAME_new_null())
-			|| !(gen = GENERAL_NAME_new())
-			|| !sk_GENERAL_NAME_push(gens, gen))
-			{
-			X509V3err(X509V3_F_V2I_AUTHORITY_KEYID,ERR_R_MALLOC_FAILURE);
-			goto err;
-			}
-		gen->type = GEN_DIRNAME;
-		gen->d.dirn = isname;
-		}
-
-	akeyid->issuer = gens;
-	akeyid->serial = serial;
-	akeyid->keyid = ikeyid;
-
-	return akeyid;
-
- err:
-	X509_NAME_free(isname);
-	M_ASN1_INTEGER_free(serial);
-	M_ASN1_OCTET_STRING_free(ikeyid);
-	return NULL;
-	}
diff --git a/crypto/openssl/crypto/x509v3/v3_akeya.c b/crypto/openssl/crypto/x509v3/v3_akeya.c
deleted file mode 100644
index 2aafa26ba712..000000000000
--- a/crypto/openssl/crypto/x509v3/v3_akeya.c
+++ /dev/null
@@ -1,72 +0,0 @@
-/* v3_akey_asn1.c */
-/* Written by Dr Stephen N Henson (shenson@bigfoot.com) for the OpenSSL
- * project 1999.
- */
-/* ====================================================================
- * Copyright (c) 1999 The OpenSSL Project.  All rights reserved.
- *
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions
- * are met:
- *
- * 1. Redistributions of source code must retain the above copyright
- *    notice, this list of conditions and the following disclaimer. 
- *
- * 2. Redistributions in binary form must reproduce the above copyright
- *    notice, this list of conditions and the following disclaimer in
- *    the documentation and/or other materials provided with the
- *    distribution.
- *
- * 3. All advertising materials mentioning features or use of this
- *    software must display the following acknowledgment:
- *    "This product includes software developed by the OpenSSL Project
- *    for use in the OpenSSL Toolkit. (http://www.OpenSSL.org/)"
- *
- * 4. The names "OpenSSL Toolkit" and "OpenSSL Project" must not be used to
- *    endorse or promote products derived from this software without
- *    prior written permission. For written permission, please contact
- *    licensing@OpenSSL.org.
- *
- * 5. Products derived from this software may not be called "OpenSSL"
- *    nor may "OpenSSL" appear in their names without prior written
- *    permission of the OpenSSL Project.
- *
- * 6. Redistributions of any form whatsoever must retain the following
- *    acknowledgment:
- *    "This product includes software developed by the OpenSSL Project
- *    for use in the OpenSSL Toolkit (http://www.OpenSSL.org/)"
- *
- * THIS SOFTWARE IS PROVIDED BY THE OpenSSL PROJECT ``AS IS'' AND ANY
- * EXPRESSED OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
- * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR
- * PURPOSE ARE DISCLAIMED.  IN NO EVENT SHALL THE OpenSSL PROJECT OR
- * ITS CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
- * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
- * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
- * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
- * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
- * STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
- * ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED
- * OF THE POSSIBILITY OF SUCH DAMAGE.
- * ====================================================================
- *
- * This product includes cryptographic software written by Eric Young
- * (eay@cryptsoft.com).  This product includes software written by Tim
- * Hudson (tjh@cryptsoft.com).
- *
- */
-
-#include <stdio.h>
-#include "cryptlib.h"
-#include <openssl/conf.h>
-#include <openssl/asn1.h>
-#include <openssl/asn1t.h>
-#include <openssl/x509v3.h>
-
-ASN1_SEQUENCE(AUTHORITY_KEYID) = {
-	ASN1_IMP_OPT(AUTHORITY_KEYID, keyid, ASN1_OCTET_STRING, 0),
-	ASN1_IMP_SEQUENCE_OF_OPT(AUTHORITY_KEYID, issuer, GENERAL_NAME, 1),
-	ASN1_IMP_OPT(AUTHORITY_KEYID, serial, ASN1_INTEGER, 2)
-} ASN1_SEQUENCE_END(AUTHORITY_KEYID)
-
-IMPLEMENT_ASN1_FUNCTIONS(AUTHORITY_KEYID)
diff --git a/crypto/openssl/crypto/x509v3/v3_alt.c b/crypto/openssl/crypto/x509v3/v3_alt.c
deleted file mode 100644
index bb2f5bc54eba..000000000000
--- a/crypto/openssl/crypto/x509v3/v3_alt.c
+++ /dev/null
@@ -1,581 +0,0 @@
-/* v3_alt.c */
-/* Written by Dr Stephen N Henson (shenson@bigfoot.com) for the OpenSSL
- * project.
- */
-/* ====================================================================
- * Copyright (c) 1999-2003 The OpenSSL Project.  All rights reserved.
- *
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions
- * are met:
- *
- * 1. Redistributions of source code must retain the above copyright
- *    notice, this list of conditions and the following disclaimer. 
- *
- * 2. Redistributions in binary form must reproduce the above copyright
- *    notice, this list of conditions and the following disclaimer in
- *    the documentation and/or other materials provided with the
- *    distribution.
- *
- * 3. All advertising materials mentioning features or use of this
- *    software must display the following acknowledgment:
- *    "This product includes software developed by the OpenSSL Project
- *    for use in the OpenSSL Toolkit. (http://www.OpenSSL.org/)"
- *
- * 4. The names "OpenSSL Toolkit" and "OpenSSL Project" must not be used to
- *    endorse or promote products derived from this software without
- *    prior written permission. For written permission, please contact
- *    licensing@OpenSSL.org.
- *
- * 5. Products derived from this software may not be called "OpenSSL"
- *    nor may "OpenSSL" appear in their names without prior written
- *    permission of the OpenSSL Project.
- *
- * 6. Redistributions of any form whatsoever must retain the following
- *    acknowledgment:
- *    "This product includes software developed by the OpenSSL Project
- *    for use in the OpenSSL Toolkit (http://www.OpenSSL.org/)"
- *
- * THIS SOFTWARE IS PROVIDED BY THE OpenSSL PROJECT ``AS IS'' AND ANY
- * EXPRESSED OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
- * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR
- * PURPOSE ARE DISCLAIMED.  IN NO EVENT SHALL THE OpenSSL PROJECT OR
- * ITS CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
- * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
- * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
- * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
- * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
- * STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
- * ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED
- * OF THE POSSIBILITY OF SUCH DAMAGE.
- * ====================================================================
- *
- * This product includes cryptographic software written by Eric Young
- * (eay@cryptsoft.com).  This product includes software written by Tim
- * Hudson (tjh@cryptsoft.com).
- *
- */
-
-#include <stdio.h>
-#include "cryptlib.h"
-#include <openssl/conf.h>
-#include <openssl/x509v3.h>
-
-static GENERAL_NAMES *v2i_subject_alt(X509V3_EXT_METHOD *method, X509V3_CTX *ctx, STACK_OF(CONF_VALUE) *nval);
-static GENERAL_NAMES *v2i_issuer_alt(X509V3_EXT_METHOD *method, X509V3_CTX *ctx, STACK_OF(CONF_VALUE) *nval);
-static int copy_email(X509V3_CTX *ctx, GENERAL_NAMES *gens, int move_p);
-static int copy_issuer(X509V3_CTX *ctx, GENERAL_NAMES *gens);
-static int do_othername(GENERAL_NAME *gen, char *value, X509V3_CTX *ctx);
-static int do_dirname(GENERAL_NAME *gen, char *value, X509V3_CTX *ctx);
-
-const X509V3_EXT_METHOD v3_alt[] = {
-{ NID_subject_alt_name, 0, ASN1_ITEM_ref(GENERAL_NAMES),
-0,0,0,0,
-0,0,
-(X509V3_EXT_I2V)i2v_GENERAL_NAMES,
-(X509V3_EXT_V2I)v2i_subject_alt,
-NULL, NULL, NULL},
-
-{ NID_issuer_alt_name, 0, ASN1_ITEM_ref(GENERAL_NAMES),
-0,0,0,0,
-0,0,
-(X509V3_EXT_I2V)i2v_GENERAL_NAMES,
-(X509V3_EXT_V2I)v2i_issuer_alt,
-NULL, NULL, NULL},
-};
-
-STACK_OF(CONF_VALUE) *i2v_GENERAL_NAMES(X509V3_EXT_METHOD *method,
-		GENERAL_NAMES *gens, STACK_OF(CONF_VALUE) *ret)
-{
-	int i;
-	GENERAL_NAME *gen;
-	for(i = 0; i < sk_GENERAL_NAME_num(gens); i++) {
-		gen = sk_GENERAL_NAME_value(gens, i);
-		ret = i2v_GENERAL_NAME(method, gen, ret);
-	}
-	if(!ret) return sk_CONF_VALUE_new_null();
-	return ret;
-}
-
-STACK_OF(CONF_VALUE) *i2v_GENERAL_NAME(X509V3_EXT_METHOD *method,
-				GENERAL_NAME *gen, STACK_OF(CONF_VALUE) *ret)
-{
-	unsigned char *p;
-	char oline[256], htmp[5];
-	int i;
-	switch (gen->type)
-	{
-		case GEN_OTHERNAME:
-		X509V3_add_value("othername","<unsupported>", &ret);
-		break;
-
-		case GEN_X400:
-		X509V3_add_value("X400Name","<unsupported>", &ret);
-		break;
-
-		case GEN_EDIPARTY:
-		X509V3_add_value("EdiPartyName","<unsupported>", &ret);
-		break;
-
-		case GEN_EMAIL:
-		X509V3_add_value_uchar("email",gen->d.ia5->data, &ret);
-		break;
-
-		case GEN_DNS:
-		X509V3_add_value_uchar("DNS",gen->d.ia5->data, &ret);
-		break;
-
-		case GEN_URI:
-		X509V3_add_value_uchar("URI",gen->d.ia5->data, &ret);
-		break;
-
-		case GEN_DIRNAME:
-		X509_NAME_oneline(gen->d.dirn, oline, 256);
-		X509V3_add_value("DirName",oline, &ret);
-		break;
-
-		case GEN_IPADD:
-		p = gen->d.ip->data;
-		if(gen->d.ip->length == 4)
-			BIO_snprintf(oline, sizeof oline,
-				     "%d.%d.%d.%d", p[0], p[1], p[2], p[3]);
-		else if(gen->d.ip->length == 16)
-			{
-			oline[0] = 0;
-			for (i = 0; i < 8; i++)
-				{
-				BIO_snprintf(htmp, sizeof htmp,
-					     "%X", p[0] << 8 | p[1]);
-				p += 2;
-				strcat(oline, htmp);
-				if (i != 7)
-					strcat(oline, ":");
-				}
-			}
-		else
-			{
-			X509V3_add_value("IP Address","<invalid>", &ret);
-			break;
-			}
-		X509V3_add_value("IP Address",oline, &ret);
-		break;
-
-		case GEN_RID:
-		i2t_ASN1_OBJECT(oline, 256, gen->d.rid);
-		X509V3_add_value("Registered ID",oline, &ret);
-		break;
-	}
-	return ret;
-}
-
-int GENERAL_NAME_print(BIO *out, GENERAL_NAME *gen)
-{
-	unsigned char *p;
-	int i;
-	switch (gen->type)
-	{
-		case GEN_OTHERNAME:
-		BIO_printf(out, "othername:<unsupported>");
-		break;
-
-		case GEN_X400:
-		BIO_printf(out, "X400Name:<unsupported>");
-		break;
-
-		case GEN_EDIPARTY:
-		/* Maybe fix this: it is supported now */
-		BIO_printf(out, "EdiPartyName:<unsupported>");
-		break;
-
-		case GEN_EMAIL:
-		BIO_printf(out, "email:%s",gen->d.ia5->data);
-		break;
-
-		case GEN_DNS:
-		BIO_printf(out, "DNS:%s",gen->d.ia5->data);
-		break;
-
-		case GEN_URI:
-		BIO_printf(out, "URI:%s",gen->d.ia5->data);
-		break;
-
-		case GEN_DIRNAME:
-		BIO_printf(out, "DirName: ");
-		X509_NAME_print_ex(out, gen->d.dirn, 0, XN_FLAG_ONELINE);
-		break;
-
-		case GEN_IPADD:
-		p = gen->d.ip->data;
-		if(gen->d.ip->length == 4)
-			BIO_printf(out, "IP Address:%d.%d.%d.%d",
-						p[0], p[1], p[2], p[3]);
-		else if(gen->d.ip->length == 16)
-			{
-			BIO_printf(out, "IP Address");
-			for (i = 0; i < 8; i++)
-				{
-				BIO_printf(out, ":%X", p[0] << 8 | p[1]);
-				p += 2;
-				}
-			BIO_puts(out, "\n");
-			}
-		else
-			{
-			BIO_printf(out,"IP Address:<invalid>");
-			break;
-			}
-		break;
-
-		case GEN_RID:
-		BIO_printf(out, "Registered ID");
-		i2a_ASN1_OBJECT(out, gen->d.rid);
-		break;
-	}
-	return 1;
-}
-
-static GENERAL_NAMES *v2i_issuer_alt(X509V3_EXT_METHOD *method,
-				 X509V3_CTX *ctx, STACK_OF(CONF_VALUE) *nval)
-{
-	GENERAL_NAMES *gens = NULL;
-	CONF_VALUE *cnf;
-	int i;
-	if(!(gens = sk_GENERAL_NAME_new_null())) {
-		X509V3err(X509V3_F_V2I_ISSUER_ALT,ERR_R_MALLOC_FAILURE);
-		return NULL;
-	}
-	for(i = 0; i < sk_CONF_VALUE_num(nval); i++) {
-		cnf = sk_CONF_VALUE_value(nval, i);
-		if(!name_cmp(cnf->name, "issuer") && cnf->value &&
-						!strcmp(cnf->value, "copy")) {
-			if(!copy_issuer(ctx, gens)) goto err;
-		} else {
-			GENERAL_NAME *gen;
-			if(!(gen = v2i_GENERAL_NAME(method, ctx, cnf)))
-								 goto err; 
-			sk_GENERAL_NAME_push(gens, gen);
-		}
-	}
-	return gens;
-	err:
-	sk_GENERAL_NAME_pop_free(gens, GENERAL_NAME_free);
-	return NULL;
-}
-
-/* Append subject altname of issuer to issuer alt name of subject */
-
-static int copy_issuer(X509V3_CTX *ctx, GENERAL_NAMES *gens)
-{
-	GENERAL_NAMES *ialt;
-	GENERAL_NAME *gen;
-	X509_EXTENSION *ext;
-	int i;
-	if(ctx && (ctx->flags == CTX_TEST)) return 1;
-	if(!ctx || !ctx->issuer_cert) {
-		X509V3err(X509V3_F_COPY_ISSUER,X509V3_R_NO_ISSUER_DETAILS);
-		goto err;
-	}
-        i = X509_get_ext_by_NID(ctx->issuer_cert, NID_subject_alt_name, -1);
-	if(i < 0) return 1;
-        if(!(ext = X509_get_ext(ctx->issuer_cert, i)) ||
-                        !(ialt = X509V3_EXT_d2i(ext)) ) {
-		X509V3err(X509V3_F_COPY_ISSUER,X509V3_R_ISSUER_DECODE_ERROR);
-		goto err;
-	}
-
-	for(i = 0; i < sk_GENERAL_NAME_num(ialt); i++) {
-		gen = sk_GENERAL_NAME_value(ialt, i);
-		if(!sk_GENERAL_NAME_push(gens, gen)) {
-			X509V3err(X509V3_F_COPY_ISSUER,ERR_R_MALLOC_FAILURE);
-			goto err;
-		}
-	}
-	sk_GENERAL_NAME_free(ialt);
-
-	return 1;
-		
-	err:
-	return 0;
-	
-}
-
-static GENERAL_NAMES *v2i_subject_alt(X509V3_EXT_METHOD *method,
-				 X509V3_CTX *ctx, STACK_OF(CONF_VALUE) *nval)
-{
-	GENERAL_NAMES *gens = NULL;
-	CONF_VALUE *cnf;
-	int i;
-	if(!(gens = sk_GENERAL_NAME_new_null())) {
-		X509V3err(X509V3_F_V2I_SUBJECT_ALT,ERR_R_MALLOC_FAILURE);
-		return NULL;
-	}
-	for(i = 0; i < sk_CONF_VALUE_num(nval); i++) {
-		cnf = sk_CONF_VALUE_value(nval, i);
-		if(!name_cmp(cnf->name, "email") && cnf->value &&
-						!strcmp(cnf->value, "copy")) {
-			if(!copy_email(ctx, gens, 0)) goto err;
-		} else if(!name_cmp(cnf->name, "email") && cnf->value &&
-						!strcmp(cnf->value, "move")) {
-			if(!copy_email(ctx, gens, 1)) goto err;
-		} else {
-			GENERAL_NAME *gen;
-			if(!(gen = v2i_GENERAL_NAME(method, ctx, cnf)))
-								 goto err; 
-			sk_GENERAL_NAME_push(gens, gen);
-		}
-	}
-	return gens;
-	err:
-	sk_GENERAL_NAME_pop_free(gens, GENERAL_NAME_free);
-	return NULL;
-}
-
-/* Copy any email addresses in a certificate or request to 
- * GENERAL_NAMES
- */
-
-static int copy_email(X509V3_CTX *ctx, GENERAL_NAMES *gens, int move_p)
-{
-	X509_NAME *nm;
-	ASN1_IA5STRING *email = NULL;
-	X509_NAME_ENTRY *ne;
-	GENERAL_NAME *gen = NULL;
-	int i;
-	if(ctx != NULL && ctx->flags == CTX_TEST)
-		return 1;
-	if(!ctx || (!ctx->subject_cert && !ctx->subject_req)) {
-		X509V3err(X509V3_F_COPY_EMAIL,X509V3_R_NO_SUBJECT_DETAILS);
-		goto err;
-	}
-	/* Find the subject name */
-	if(ctx->subject_cert) nm = X509_get_subject_name(ctx->subject_cert);
-	else nm = X509_REQ_get_subject_name(ctx->subject_req);
-
-	/* Now add any email address(es) to STACK */
-	i = -1;
-	while((i = X509_NAME_get_index_by_NID(nm,
-					 NID_pkcs9_emailAddress, i)) >= 0) {
-		ne = X509_NAME_get_entry(nm, i);
-		email = M_ASN1_IA5STRING_dup(X509_NAME_ENTRY_get_data(ne));
-                if (move_p)
-                        {
-                        X509_NAME_delete_entry(nm, i);
-                        i--;
-                        }
-		if(!email || !(gen = GENERAL_NAME_new())) {
-			X509V3err(X509V3_F_COPY_EMAIL,ERR_R_MALLOC_FAILURE);
-			goto err;
-		}
-		gen->d.ia5 = email;
-		email = NULL;
-		gen->type = GEN_EMAIL;
-		if(!sk_GENERAL_NAME_push(gens, gen)) {
-			X509V3err(X509V3_F_COPY_EMAIL,ERR_R_MALLOC_FAILURE);
-			goto err;
-		}
-		gen = NULL;
-	}
-
-	
-	return 1;
-		
-	err:
-	GENERAL_NAME_free(gen);
-	M_ASN1_IA5STRING_free(email);
-	return 0;
-	
-}
-
-GENERAL_NAMES *v2i_GENERAL_NAMES(X509V3_EXT_METHOD *method,
-				X509V3_CTX *ctx, STACK_OF(CONF_VALUE) *nval)
-{
-	GENERAL_NAME *gen;
-	GENERAL_NAMES *gens = NULL;
-	CONF_VALUE *cnf;
-	int i;
-	if(!(gens = sk_GENERAL_NAME_new_null())) {
-		X509V3err(X509V3_F_V2I_GENERAL_NAMES,ERR_R_MALLOC_FAILURE);
-		return NULL;
-	}
-	for(i = 0; i < sk_CONF_VALUE_num(nval); i++) {
-		cnf = sk_CONF_VALUE_value(nval, i);
-		if(!(gen = v2i_GENERAL_NAME(method, ctx, cnf))) goto err; 
-		sk_GENERAL_NAME_push(gens, gen);
-	}
-	return gens;
-	err:
-	sk_GENERAL_NAME_pop_free(gens, GENERAL_NAME_free);
-	return NULL;
-}
-
-GENERAL_NAME *v2i_GENERAL_NAME(X509V3_EXT_METHOD *method, X509V3_CTX *ctx,
-							 CONF_VALUE *cnf)
-	{
-	return v2i_GENERAL_NAME_ex(NULL, method, ctx, cnf, 0);
-	}
-
-GENERAL_NAME *v2i_GENERAL_NAME_ex(GENERAL_NAME *out,
-				X509V3_EXT_METHOD *method, X509V3_CTX *ctx,
-						 CONF_VALUE *cnf, int is_nc)
-	{
-	char is_string = 0;
-	int type;
-	GENERAL_NAME *gen = NULL;
-
-	char *name, *value;
-
-	name = cnf->name;
-	value = cnf->value;
-
-	if(!value)
-		{
-		X509V3err(X509V3_F_V2I_GENERAL_NAME_EX,X509V3_R_MISSING_VALUE);
-		return NULL;
-		}
-
-	if (out)
-		gen = out;
-	else
-		{
-		gen = GENERAL_NAME_new();
-		if(gen == NULL)
-			{
-			X509V3err(X509V3_F_V2I_GENERAL_NAME_EX,ERR_R_MALLOC_FAILURE);
-			return NULL;
-			}
-		}
-
-	if(!name_cmp(name, "email"))
-		{
-		is_string = 1;
-		type = GEN_EMAIL;
-		}
-	else if(!name_cmp(name, "URI"))
-		{
-		is_string = 1;
-		type = GEN_URI;
-		}
-	else if(!name_cmp(name, "DNS"))
-		{
-		is_string = 1;
-		type = GEN_DNS;
-		}
-	else if(!name_cmp(name, "RID"))
-		{
-		ASN1_OBJECT *obj;
-		if(!(obj = OBJ_txt2obj(value,0)))
-			{
-			X509V3err(X509V3_F_V2I_GENERAL_NAME_EX,X509V3_R_BAD_OBJECT);
-			ERR_add_error_data(2, "value=", value);
-			goto err;
-			}
-		gen->d.rid = obj;
-		type = GEN_RID;
-		}
-	else if(!name_cmp(name, "IP"))
-		{
-		if (is_nc)
-			gen->d.ip = a2i_IPADDRESS_NC(value);
-		else
-			gen->d.ip = a2i_IPADDRESS(value);
-		if(gen->d.ip == NULL)
-			{
-			X509V3err(X509V3_F_V2I_GENERAL_NAME_EX,X509V3_R_BAD_IP_ADDRESS);
-			ERR_add_error_data(2, "value=", value);
-			goto err;
-			}
-		type = GEN_IPADD;
-		}
-	else if(!name_cmp(name, "dirName"))
-		{
-		type = GEN_DIRNAME;
-		if (!do_dirname(gen, value, ctx))
-			{
-			X509V3err(X509V3_F_V2I_GENERAL_NAME_EX,X509V3_R_DIRNAME_ERROR);
-			goto err;
-			}
-		}
-	else if(!name_cmp(name, "otherName"))
-		{
-		if (!do_othername(gen, value, ctx))
-			{
-			X509V3err(X509V3_F_V2I_GENERAL_NAME_EX,X509V3_R_OTHERNAME_ERROR);
-			goto err;
-			}
-		type = GEN_OTHERNAME;
-		}
-	else
-		{
-		X509V3err(X509V3_F_V2I_GENERAL_NAME_EX,X509V3_R_UNSUPPORTED_OPTION);
-		ERR_add_error_data(2, "name=", name);
-		goto err;
-		}
-
-	if(is_string)
-		{
-		if(!(gen->d.ia5 = M_ASN1_IA5STRING_new()) ||
-			      !ASN1_STRING_set(gen->d.ia5, (unsigned char*)value,
-					       strlen(value)))
-			{
-			X509V3err(X509V3_F_V2I_GENERAL_NAME_EX,ERR_R_MALLOC_FAILURE);
-			goto err;
-			}
-		}
-
-	gen->type = type;
-
-	return gen;
-
-	err:
-	GENERAL_NAME_free(gen);
-	return NULL;
-	}
-
-static int do_othername(GENERAL_NAME *gen, char *value, X509V3_CTX *ctx)
-	{
-	char *objtmp = NULL, *p;
-	int objlen;
-	if (!(p = strchr(value, ';')))
-		return 0;
-	if (!(gen->d.otherName = OTHERNAME_new()))
-		return 0;
-	/* Free this up because we will overwrite it.
-	 * no need to free type_id because it is static
-	 */
-	ASN1_TYPE_free(gen->d.otherName->value);
-	if (!(gen->d.otherName->value = ASN1_generate_v3(p + 1, ctx)))
-		return 0;
-	objlen = p - value;
-	objtmp = OPENSSL_malloc(objlen + 1);
-	strncpy(objtmp, value, objlen);
-	objtmp[objlen] = 0;
-	gen->d.otherName->type_id = OBJ_txt2obj(objtmp, 0);
-	OPENSSL_free(objtmp);	
-	if (!gen->d.otherName->type_id)
-		return 0;
-	return 1;
-	}
-
-static int do_dirname(GENERAL_NAME *gen, char *value, X509V3_CTX *ctx)
-	{
-	int ret;
-	STACK_OF(CONF_VALUE) *sk;
-	X509_NAME *nm;
-	if (!(nm = X509_NAME_new()))
-		return 0;
-	sk = X509V3_get_section(ctx, value);
-	if (!sk)
-		{
-		X509V3err(X509V3_F_DO_DIRNAME,X509V3_R_SECTION_NOT_FOUND);
-		ERR_add_error_data(2, "section=", value);
-		X509_NAME_free(nm);
-		return 0;
-		}
-	/* FIXME: should allow other character types... */
-	ret = X509V3_NAME_from_section(nm, sk, MBSTRING_ASC);
-	if (!ret)
-		X509_NAME_free(nm);
-	gen->d.dirn = nm;
-		
-	return ret;
-	}
diff --git a/crypto/openssl/crypto/x509v3/v3_asid.c b/crypto/openssl/crypto/x509v3/v3_asid.c
deleted file mode 100644
index 271930f9670a..000000000000
--- a/crypto/openssl/crypto/x509v3/v3_asid.c
+++ /dev/null
@@ -1,842 +0,0 @@
-/*
- * Contributed to the OpenSSL Project by the American Registry for
- * Internet Numbers ("ARIN").
- */
-/* ====================================================================
- * Copyright (c) 2006 The OpenSSL Project.  All rights reserved.
- *
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions
- * are met:
- *
- * 1. Redistributions of source code must retain the above copyright
- *    notice, this list of conditions and the following disclaimer. 
- *
- * 2. Redistributions in binary form must reproduce the above copyright
- *    notice, this list of conditions and the following disclaimer in
- *    the documentation and/or other materials provided with the
- *    distribution.
- *
- * 3. All advertising materials mentioning features or use of this
- *    software must display the following acknowledgment:
- *    "This product includes software developed by the OpenSSL Project
- *    for use in the OpenSSL Toolkit. (http://www.OpenSSL.org/)"
- *
- * 4. The names "OpenSSL Toolkit" and "OpenSSL Project" must not be used to
- *    endorse or promote products derived from this software without
- *    prior written permission. For written permission, please contact
- *    licensing@OpenSSL.org.
- *
- * 5. Products derived from this software may not be called "OpenSSL"
- *    nor may "OpenSSL" appear in their names without prior written
- *    permission of the OpenSSL Project.
- *
- * 6. Redistributions of any form whatsoever must retain the following
- *    acknowledgment:
- *    "This product includes software developed by the OpenSSL Project
- *    for use in the OpenSSL Toolkit (http://www.OpenSSL.org/)"
- *
- * THIS SOFTWARE IS PROVIDED BY THE OpenSSL PROJECT ``AS IS'' AND ANY
- * EXPRESSED OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
- * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR
- * PURPOSE ARE DISCLAIMED.  IN NO EVENT SHALL THE OpenSSL PROJECT OR
- * ITS CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
- * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
- * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
- * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
- * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
- * STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
- * ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED
- * OF THE POSSIBILITY OF SUCH DAMAGE.
- * ====================================================================
- *
- * This product includes cryptographic software written by Eric Young
- * (eay@cryptsoft.com).  This product includes software written by Tim
- * Hudson (tjh@cryptsoft.com).
- */
-
-/*
- * Implementation of RFC 3779 section 3.2.
- */
-
-#include <stdio.h>
-#include <string.h>
-#include <assert.h>
-#include "cryptlib.h"
-#include <openssl/conf.h>
-#include <openssl/asn1.h>
-#include <openssl/asn1t.h>
-#include <openssl/x509v3.h>
-#include <openssl/x509.h>
-#include <openssl/bn.h>
-
-#ifndef OPENSSL_NO_RFC3779
-
-/*
- * OpenSSL ASN.1 template translation of RFC 3779 3.2.3.
- */
-
-ASN1_SEQUENCE(ASRange) = {
-  ASN1_SIMPLE(ASRange, min, ASN1_INTEGER),
-  ASN1_SIMPLE(ASRange, max, ASN1_INTEGER)
-} ASN1_SEQUENCE_END(ASRange)
-
-ASN1_CHOICE(ASIdOrRange) = {
-  ASN1_SIMPLE(ASIdOrRange, u.id,    ASN1_INTEGER),
-  ASN1_SIMPLE(ASIdOrRange, u.range, ASRange)
-} ASN1_CHOICE_END(ASIdOrRange)
-
-ASN1_CHOICE(ASIdentifierChoice) = {
-  ASN1_SIMPLE(ASIdentifierChoice,      u.inherit,       ASN1_NULL),
-  ASN1_SEQUENCE_OF(ASIdentifierChoice, u.asIdsOrRanges, ASIdOrRange)
-} ASN1_CHOICE_END(ASIdentifierChoice)
-
-ASN1_SEQUENCE(ASIdentifiers) = {
-  ASN1_EXP_OPT(ASIdentifiers, asnum, ASIdentifierChoice, 0),
-  ASN1_EXP_OPT(ASIdentifiers, rdi,   ASIdentifierChoice, 1)
-} ASN1_SEQUENCE_END(ASIdentifiers)
-
-IMPLEMENT_ASN1_FUNCTIONS(ASRange)
-IMPLEMENT_ASN1_FUNCTIONS(ASIdOrRange)
-IMPLEMENT_ASN1_FUNCTIONS(ASIdentifierChoice)
-IMPLEMENT_ASN1_FUNCTIONS(ASIdentifiers)
-
-/*
- * i2r method for an ASIdentifierChoice.
- */
-static int i2r_ASIdentifierChoice(BIO *out,
-				  ASIdentifierChoice *choice,
-				  int indent,
-				  const char *msg)
-{
-  int i;
-  char *s;
-  if (choice == NULL)
-    return 1;
-  BIO_printf(out, "%*s%s:\n", indent, "", msg);
-  switch (choice->type) {
-  case ASIdentifierChoice_inherit:
-    BIO_printf(out, "%*sinherit\n", indent + 2, "");
-    break;
-  case ASIdentifierChoice_asIdsOrRanges:
-    for (i = 0; i < sk_ASIdOrRange_num(choice->u.asIdsOrRanges); i++) {
-      ASIdOrRange *aor = sk_ASIdOrRange_value(choice->u.asIdsOrRanges, i);
-      switch (aor->type) {
-      case ASIdOrRange_id:
-	if ((s = i2s_ASN1_INTEGER(NULL, aor->u.id)) == NULL)
-	  return 0;
-	BIO_printf(out, "%*s%s\n", indent + 2, "", s);
-	OPENSSL_free(s);
-	break;
-      case ASIdOrRange_range:
-	if ((s = i2s_ASN1_INTEGER(NULL, aor->u.range->min)) == NULL)
-	  return 0;
-	BIO_printf(out, "%*s%s-", indent + 2, "", s);
-	OPENSSL_free(s);
-	if ((s = i2s_ASN1_INTEGER(NULL, aor->u.range->max)) == NULL)
-	  return 0;
-	BIO_printf(out, "%s\n", s);
-	OPENSSL_free(s);
-	break;
-      default:
-	return 0;
-      }
-    }
-    break;
-  default:
-    return 0;
-  }
-  return 1;
-}
-
-/*
- * i2r method for an ASIdentifier extension.
- */
-static int i2r_ASIdentifiers(X509V3_EXT_METHOD *method,
-			     void *ext,
-			     BIO *out,
-			     int indent)
-{
-  ASIdentifiers *asid = ext;
-  return (i2r_ASIdentifierChoice(out, asid->asnum, indent,
-				 "Autonomous System Numbers") &&
-	  i2r_ASIdentifierChoice(out, asid->rdi, indent,
-				 "Routing Domain Identifiers"));
-}
-
-/*
- * Sort comparision function for a sequence of ASIdOrRange elements.
- */
-static int ASIdOrRange_cmp(const ASIdOrRange * const *a_,
-			   const ASIdOrRange * const *b_)
-{
-  const ASIdOrRange *a = *a_, *b = *b_;
-
-  assert((a->type == ASIdOrRange_id && a->u.id != NULL) ||
-	 (a->type == ASIdOrRange_range && a->u.range != NULL &&
-	  a->u.range->min != NULL && a->u.range->max != NULL));
-
-  assert((b->type == ASIdOrRange_id && b->u.id != NULL) ||
-	 (b->type == ASIdOrRange_range && b->u.range != NULL &&
-	  b->u.range->min != NULL && b->u.range->max != NULL));
-
-  if (a->type == ASIdOrRange_id && b->type == ASIdOrRange_id)
-    return ASN1_INTEGER_cmp(a->u.id, b->u.id);
-
-  if (a->type == ASIdOrRange_range && b->type == ASIdOrRange_range) {
-    int r = ASN1_INTEGER_cmp(a->u.range->min, b->u.range->min);
-    return r != 0 ? r : ASN1_INTEGER_cmp(a->u.range->max, b->u.range->max);
-  }
-
-  if (a->type == ASIdOrRange_id)
-    return ASN1_INTEGER_cmp(a->u.id, b->u.range->min);
-  else
-    return ASN1_INTEGER_cmp(a->u.range->min, b->u.id);
-}
-
-/*
- * Add an inherit element.
- */
-int v3_asid_add_inherit(ASIdentifiers *asid, int which)
-{
-  ASIdentifierChoice **choice;
-  if (asid == NULL)
-    return 0;
-  switch (which) {
-  case V3_ASID_ASNUM:
-    choice = &asid->asnum;
-    break;
-  case V3_ASID_RDI:
-    choice = &asid->rdi;
-    break;
-  default:
-    return 0;
-  }
-  if (*choice == NULL) {
-    if ((*choice = ASIdentifierChoice_new()) == NULL)
-      return 0;
-    assert((*choice)->u.inherit == NULL);
-    if (((*choice)->u.inherit = ASN1_NULL_new()) == NULL)
-      return 0;
-    (*choice)->type = ASIdentifierChoice_inherit;
-  }
-  return (*choice)->type == ASIdentifierChoice_inherit;
-}
-
-/*
- * Add an ID or range to an ASIdentifierChoice.
- */
-int v3_asid_add_id_or_range(ASIdentifiers *asid,
-			    int which,
-			    ASN1_INTEGER *min,
-			    ASN1_INTEGER *max)
-{
-  ASIdentifierChoice **choice;
-  ASIdOrRange *aor;
-  if (asid == NULL)
-    return 0;
-  switch (which) {
-  case V3_ASID_ASNUM:
-    choice = &asid->asnum;
-    break;
-  case V3_ASID_RDI:
-    choice = &asid->rdi;
-    break;
-  default:
-    return 0;
-  }
-  if (*choice != NULL && (*choice)->type == ASIdentifierChoice_inherit)
-    return 0;
-  if (*choice == NULL) {
-    if ((*choice = ASIdentifierChoice_new()) == NULL)
-      return 0;
-    assert((*choice)->u.asIdsOrRanges == NULL);
-    (*choice)->u.asIdsOrRanges = sk_ASIdOrRange_new(ASIdOrRange_cmp);
-    if ((*choice)->u.asIdsOrRanges == NULL)
-      return 0;
-    (*choice)->type = ASIdentifierChoice_asIdsOrRanges;
-  }
-  if ((aor = ASIdOrRange_new()) == NULL)
-    return 0;
-  if (max == NULL) {
-    aor->type = ASIdOrRange_id;
-    aor->u.id = min;
-  } else {
-    aor->type = ASIdOrRange_range;
-    if ((aor->u.range = ASRange_new()) == NULL)
-      goto err;
-    ASN1_INTEGER_free(aor->u.range->min);
-    aor->u.range->min = min;
-    ASN1_INTEGER_free(aor->u.range->max);
-    aor->u.range->max = max;
-  }
-  if (!(sk_ASIdOrRange_push((*choice)->u.asIdsOrRanges, aor)))
-    goto err;
-  return 1;
-
- err:
-  ASIdOrRange_free(aor);
-  return 0;
-}
-
-/*
- * Extract min and max values from an ASIdOrRange.
- */
-static void extract_min_max(ASIdOrRange *aor,
-			    ASN1_INTEGER **min,
-			    ASN1_INTEGER **max)
-{
-  assert(aor != NULL && min != NULL && max != NULL);
-  switch (aor->type) {
-  case ASIdOrRange_id:
-    *min = aor->u.id;
-    *max = aor->u.id;
-    return;
-  case ASIdOrRange_range:
-    *min = aor->u.range->min;
-    *max = aor->u.range->max;
-    return;
-  }
-}
-
-/*
- * Check whether an ASIdentifierChoice is in canonical form.
- */
-static int ASIdentifierChoice_is_canonical(ASIdentifierChoice *choice)
-{
-  ASN1_INTEGER *a_max_plus_one = NULL;
-  BIGNUM *bn = NULL;
-  int i, ret = 0;
-
-  /*
-   * Empty element or inheritance is canonical.
-   */
-  if (choice == NULL || choice->type == ASIdentifierChoice_inherit)
-    return 1;
-
-  /*
-   * If not a list, or if empty list, it's broken.
-   */
-  if (choice->type != ASIdentifierChoice_asIdsOrRanges ||
-      sk_ASIdOrRange_num(choice->u.asIdsOrRanges) == 0)
-    return 0;
-
-  /*
-   * It's a list, check it.
-   */
-  for (i = 0; i < sk_ASIdOrRange_num(choice->u.asIdsOrRanges) - 1; i++) {
-    ASIdOrRange *a = sk_ASIdOrRange_value(choice->u.asIdsOrRanges, i);
-    ASIdOrRange *b = sk_ASIdOrRange_value(choice->u.asIdsOrRanges, i + 1);
-    ASN1_INTEGER *a_min, *a_max, *b_min, *b_max;
-
-    extract_min_max(a, &a_min, &a_max);
-    extract_min_max(b, &b_min, &b_max);
-
-    /*
-     * Punt misordered list, overlapping start, or inverted range.
-     */
-    if (ASN1_INTEGER_cmp(a_min, b_min) >= 0 ||
-	ASN1_INTEGER_cmp(a_min, a_max) > 0 ||
-	ASN1_INTEGER_cmp(b_min, b_max) > 0)
-      goto done;
-
-    /*
-     * Calculate a_max + 1 to check for adjacency.
-     */
-    if ((bn == NULL && (bn = BN_new()) == NULL) ||
-	ASN1_INTEGER_to_BN(a_max, bn) == NULL ||
-	!BN_add_word(bn, 1) ||
-	(a_max_plus_one = BN_to_ASN1_INTEGER(bn, a_max_plus_one)) == NULL) {
-      X509V3err(X509V3_F_ASIDENTIFIERCHOICE_IS_CANONICAL,
-		ERR_R_MALLOC_FAILURE);
-      goto done;
-    }
-    
-    /*
-     * Punt if adjacent or overlapping.
-     */
-    if (ASN1_INTEGER_cmp(a_max_plus_one, b_min) >= 0)
-      goto done;
-  }
-
-  ret = 1;
-
- done:
-  ASN1_INTEGER_free(a_max_plus_one);
-  BN_free(bn);
-  return ret;
-}
-
-/*
- * Check whether an ASIdentifier extension is in canonical form.
- */
-int v3_asid_is_canonical(ASIdentifiers *asid)
-{
-  return (asid == NULL ||
-	  (ASIdentifierChoice_is_canonical(asid->asnum) ||
-	   ASIdentifierChoice_is_canonical(asid->rdi)));
-}
-
-/*
- * Whack an ASIdentifierChoice into canonical form.
- */
-static int ASIdentifierChoice_canonize(ASIdentifierChoice *choice)
-{
-  ASN1_INTEGER *a_max_plus_one = NULL;
-  BIGNUM *bn = NULL;
-  int i, ret = 0;
-
-  /*
-   * Nothing to do for empty element or inheritance.
-   */
-  if (choice == NULL || choice->type == ASIdentifierChoice_inherit)
-    return 1;
-
-  /*
-   * We have a list.  Sort it.
-   */
-  assert(choice->type == ASIdentifierChoice_asIdsOrRanges);
-  sk_ASIdOrRange_sort(choice->u.asIdsOrRanges);
-
-  /*
-   * Now check for errors and suboptimal encoding, rejecting the
-   * former and fixing the latter.
-   */
-  for (i = 0; i < sk_ASIdOrRange_num(choice->u.asIdsOrRanges) - 1; i++) {
-    ASIdOrRange *a = sk_ASIdOrRange_value(choice->u.asIdsOrRanges, i);
-    ASIdOrRange *b = sk_ASIdOrRange_value(choice->u.asIdsOrRanges, i + 1);
-    ASN1_INTEGER *a_min, *a_max, *b_min, *b_max;
-
-    extract_min_max(a, &a_min, &a_max);
-    extract_min_max(b, &b_min, &b_max);
-
-    /*
-     * Make sure we're properly sorted (paranoia).
-     */
-    assert(ASN1_INTEGER_cmp(a_min, b_min) <= 0);
-
-    /*
-     * Check for overlaps.
-     */
-    if (ASN1_INTEGER_cmp(a_max, b_min) >= 0) {
-      X509V3err(X509V3_F_ASIDENTIFIERCHOICE_CANONIZE,
-		X509V3_R_EXTENSION_VALUE_ERROR);
-      goto done;
-    }
-
-    /*
-     * Calculate a_max + 1 to check for adjacency.
-     */
-    if ((bn == NULL && (bn = BN_new()) == NULL) ||
-	ASN1_INTEGER_to_BN(a_max, bn) == NULL ||
-	!BN_add_word(bn, 1) ||
-	(a_max_plus_one = BN_to_ASN1_INTEGER(bn, a_max_plus_one)) == NULL) {
-      X509V3err(X509V3_F_ASIDENTIFIERCHOICE_CANONIZE, ERR_R_MALLOC_FAILURE);
-      goto done;
-    }
-    
-    /*
-     * If a and b are adjacent, merge them.
-     */
-    if (ASN1_INTEGER_cmp(a_max_plus_one, b_min) == 0) {
-      ASRange *r;
-      switch (a->type) {
-      case ASIdOrRange_id:
-	if ((r = OPENSSL_malloc(sizeof(ASRange))) == NULL) {
-	  X509V3err(X509V3_F_ASIDENTIFIERCHOICE_CANONIZE,
-		    ERR_R_MALLOC_FAILURE);
-	  goto done;
-	}
-	r->min = a_min;
-	r->max = b_max;
-	a->type = ASIdOrRange_range;
-	a->u.range = r;
-	break;
-      case ASIdOrRange_range:
-	ASN1_INTEGER_free(a->u.range->max);
-	a->u.range->max = b_max;
-	break;
-      }
-      switch (b->type) {
-      case ASIdOrRange_id:
-	b->u.id = NULL;
-	break;
-      case ASIdOrRange_range:
-	b->u.range->max = NULL;
-	break;
-      }
-      ASIdOrRange_free(b);
-      sk_ASIdOrRange_delete(choice->u.asIdsOrRanges, i + 1);
-      i--;
-      continue;
-    }
-  }
-
-  assert(ASIdentifierChoice_is_canonical(choice)); /* Paranoia */
-
-  ret = 1;
-
- done:
-  ASN1_INTEGER_free(a_max_plus_one);
-  BN_free(bn);
-  return ret;
-}
-
-/*
- * Whack an ASIdentifier extension into canonical form.
- */
-int v3_asid_canonize(ASIdentifiers *asid)
-{
-  return (asid == NULL ||
-	  (ASIdentifierChoice_canonize(asid->asnum) &&
-	   ASIdentifierChoice_canonize(asid->rdi)));
-}
-
-/*
- * v2i method for an ASIdentifier extension.
- */
-static void *v2i_ASIdentifiers(struct v3_ext_method *method,
-			       struct v3_ext_ctx *ctx,
-			       STACK_OF(CONF_VALUE) *values)
-{
-  ASIdentifiers *asid = NULL;
-  int i;
-
-  if ((asid = ASIdentifiers_new()) == NULL) {
-    X509V3err(X509V3_F_V2I_ASIDENTIFIERS, ERR_R_MALLOC_FAILURE);
-    return NULL;
-  }
-
-  for (i = 0; i < sk_CONF_VALUE_num(values); i++) {
-    CONF_VALUE *val = sk_CONF_VALUE_value(values, i);
-    ASN1_INTEGER *min = NULL, *max = NULL;
-    int i1, i2, i3, is_range, which;
-
-    /*
-     * Figure out whether this is an AS or an RDI.
-     */
-    if (       !name_cmp(val->name, "AS")) {
-      which = V3_ASID_ASNUM;
-    } else if (!name_cmp(val->name, "RDI")) {
-      which = V3_ASID_RDI;
-    } else {
-      X509V3err(X509V3_F_V2I_ASIDENTIFIERS, X509V3_R_EXTENSION_NAME_ERROR);
-      X509V3_conf_err(val);
-      goto err;
-    }
-
-    /*
-     * Handle inheritance.
-     */
-    if (!strcmp(val->value, "inherit")) {
-      if (v3_asid_add_inherit(asid, which))
-	continue;
-      X509V3err(X509V3_F_V2I_ASIDENTIFIERS, X509V3_R_INVALID_INHERITANCE);
-      X509V3_conf_err(val);
-      goto err;
-    }
-
-    /*
-     * Number, range, or mistake, pick it apart and figure out which.
-     */
-    i1 = strspn(val->value, "0123456789");
-    if (val->value[i1] == '\0') {
-      is_range = 0;
-    } else {
-      is_range = 1;
-      i2 = i1 + strspn(val->value + i1, " \t");
-      if (val->value[i2] != '-') {
-	X509V3err(X509V3_F_V2I_ASIDENTIFIERS, X509V3_R_INVALID_ASNUMBER);
-	X509V3_conf_err(val);
-	goto err;
-      }
-      i2++;
-      i2 = i2 + strspn(val->value + i2, " \t");
-      i3 = i2 + strspn(val->value + i2, "0123456789");
-      if (val->value[i3] != '\0') {
-	X509V3err(X509V3_F_V2I_ASIDENTIFIERS, X509V3_R_INVALID_ASRANGE);
-	X509V3_conf_err(val);
-	goto err;
-      }
-    }
-
-    /*
-     * Syntax is ok, read and add it.
-     */
-    if (!is_range) {
-      if (!X509V3_get_value_int(val, &min)) {
-	X509V3err(X509V3_F_V2I_ASIDENTIFIERS, ERR_R_MALLOC_FAILURE);
-	goto err;
-      }
-    } else {
-      char *s = BUF_strdup(val->value);
-      if (s == NULL) {
-	X509V3err(X509V3_F_V2I_ASIDENTIFIERS, ERR_R_MALLOC_FAILURE);
-	goto err;
-      }
-      s[i1] = '\0';
-      min = s2i_ASN1_INTEGER(NULL, s);
-      max = s2i_ASN1_INTEGER(NULL, s + i2);
-      OPENSSL_free(s);
-      if (min == NULL || max == NULL) {
-	ASN1_INTEGER_free(min);
-	ASN1_INTEGER_free(max);
-	X509V3err(X509V3_F_V2I_ASIDENTIFIERS, ERR_R_MALLOC_FAILURE);
-	goto err;
-      }
-    }
-    if (!v3_asid_add_id_or_range(asid, which, min, max)) {
-      ASN1_INTEGER_free(min);
-      ASN1_INTEGER_free(max);
-      X509V3err(X509V3_F_V2I_ASIDENTIFIERS, ERR_R_MALLOC_FAILURE);
-      goto err;
-    }
-  }
-
-  /*
-   * Canonize the result, then we're done.
-   */
-  if (!v3_asid_canonize(asid))
-    goto err;
-  return asid;
-
- err:
-  ASIdentifiers_free(asid);
-  return NULL;
-}
-
-/*
- * OpenSSL dispatch.
- */
-const X509V3_EXT_METHOD v3_asid = {
-  NID_sbgp_autonomousSysNum,	/* nid */
-  0,				/* flags */
-  ASN1_ITEM_ref(ASIdentifiers),	/* template */
-  0, 0, 0, 0,			/* old functions, ignored */
-  0,				/* i2s */
-  0,				/* s2i */
-  0,				/* i2v */
-  v2i_ASIdentifiers,		/* v2i */
-  i2r_ASIdentifiers,		/* i2r */
-  0,				/* r2i */
-  NULL				/* extension-specific data */
-};
-
-/*
- * Figure out whether extension uses inheritance.
- */
-int v3_asid_inherits(ASIdentifiers *asid)
-{
-  return (asid != NULL &&
-	  ((asid->asnum != NULL &&
-	    asid->asnum->type == ASIdentifierChoice_inherit) ||
-	   (asid->rdi != NULL &&
-	    asid->rdi->type == ASIdentifierChoice_inherit)));
-}
-
-/*
- * Figure out whether parent contains child.
- */
-static int asid_contains(ASIdOrRanges *parent, ASIdOrRanges *child)
-{
-  ASN1_INTEGER *p_min, *p_max, *c_min, *c_max;
-  int p, c;
-
-  if (child == NULL || parent == child)
-    return 1;
-  if (parent == NULL)
-    return 0;
-
-  p = 0;
-  for (c = 0; c < sk_ASIdOrRange_num(child); c++) {
-    extract_min_max(sk_ASIdOrRange_value(child, c), &c_min, &c_max);
-    for (;; p++) {
-      if (p >= sk_ASIdOrRange_num(parent))
-	return 0;
-      extract_min_max(sk_ASIdOrRange_value(parent, p), &p_min, &p_max);
-      if (ASN1_INTEGER_cmp(p_max, c_max) < 0)
-	continue;
-      if (ASN1_INTEGER_cmp(p_min, c_min) > 0)
-	return 0;
-      break;
-    }
-  }
-
-  return 1;
-}
-
-/*
- * Test whether a is a subet of b.
- */
-int v3_asid_subset(ASIdentifiers *a, ASIdentifiers *b)
-{
-  return (a == NULL ||
-	  a == b ||
-	  (b != NULL &&
-	   !v3_asid_inherits(a) &&
-	   !v3_asid_inherits(b) &&
-	   asid_contains(b->asnum->u.asIdsOrRanges,
-			 a->asnum->u.asIdsOrRanges) &&
-	   asid_contains(b->rdi->u.asIdsOrRanges,
-			 a->rdi->u.asIdsOrRanges)));
-}
-
-/*
- * Validation error handling via callback.
- */
-#define validation_err(_err_)		\
-  do {					\
-    if (ctx != NULL) {			\
-      ctx->error = _err_;		\
-      ctx->error_depth = i;		\
-      ctx->current_cert = x;		\
-      ret = ctx->verify_cb(0, ctx);	\
-    } else {				\
-      ret = 0;				\
-    }					\
-    if (!ret)				\
-      goto done;			\
-  } while (0)
-
-/*
- * Core code for RFC 3779 3.3 path validation.
- */
-static int v3_asid_validate_path_internal(X509_STORE_CTX *ctx,
-					  STACK_OF(X509) *chain,
-					  ASIdentifiers *ext)
-{
-  ASIdOrRanges *child_as = NULL, *child_rdi = NULL;
-  int i, ret = 1, inherit_as = 0, inherit_rdi = 0;
-  X509 *x = NULL;
-
-  assert(chain != NULL && sk_X509_num(chain) > 0);
-  assert(ctx != NULL || ext != NULL);
-  assert(ctx == NULL || ctx->verify_cb != NULL);
-
-  /*
-   * Figure out where to start.  If we don't have an extension to
-   * check, we're done.  Otherwise, check canonical form and
-   * set up for walking up the chain.
-   */
-  if (ext != NULL) {
-    i = -1;
-  } else {
-    i = 0;
-    x = sk_X509_value(chain, i);
-    assert(x != NULL);
-    if ((ext = x->rfc3779_asid) == NULL)
-      goto done;
-  }
-  if (!v3_asid_is_canonical(ext))
-    validation_err(X509_V_ERR_INVALID_EXTENSION);
-  if (ext->asnum != NULL)  {
-    switch (ext->asnum->type) {
-    case ASIdentifierChoice_inherit:
-      inherit_as = 1;
-      break;
-    case ASIdentifierChoice_asIdsOrRanges:
-      child_as = ext->asnum->u.asIdsOrRanges;
-      break;
-    }
-  }
-  if (ext->rdi != NULL) {
-    switch (ext->rdi->type) {
-    case ASIdentifierChoice_inherit:
-      inherit_rdi = 1;
-      break;
-    case ASIdentifierChoice_asIdsOrRanges:
-      child_rdi = ext->rdi->u.asIdsOrRanges;
-      break;
-    }
-  }
-
-  /*
-   * Now walk up the chain.  Extensions must be in canonical form, no
-   * cert may list resources that its parent doesn't list.
-   */
-  for (i++; i < sk_X509_num(chain); i++) {
-    x = sk_X509_value(chain, i);
-    assert(x != NULL);
-    if (x->rfc3779_asid == NULL) {
-      if (child_as != NULL || child_rdi != NULL)
-	validation_err(X509_V_ERR_UNNESTED_RESOURCE);
-      continue;
-    }
-    if (!v3_asid_is_canonical(x->rfc3779_asid))
-      validation_err(X509_V_ERR_INVALID_EXTENSION);
-    if (x->rfc3779_asid->asnum == NULL && child_as != NULL) {
-      validation_err(X509_V_ERR_UNNESTED_RESOURCE);
-      child_as = NULL;
-      inherit_as = 0;
-    }
-    if (x->rfc3779_asid->asnum != NULL &&
-	x->rfc3779_asid->asnum->type == ASIdentifierChoice_asIdsOrRanges) {
-      if (inherit_as ||
-	  asid_contains(x->rfc3779_asid->asnum->u.asIdsOrRanges, child_as)) {
-	child_as = x->rfc3779_asid->asnum->u.asIdsOrRanges;
-	inherit_as = 0;
-      } else {
-	validation_err(X509_V_ERR_UNNESTED_RESOURCE);
-      }
-    }
-    if (x->rfc3779_asid->rdi == NULL && child_rdi != NULL) {
-      validation_err(X509_V_ERR_UNNESTED_RESOURCE);
-      child_rdi = NULL;
-      inherit_rdi = 0;
-    }
-    if (x->rfc3779_asid->rdi != NULL &&
-	x->rfc3779_asid->rdi->type == ASIdentifierChoice_asIdsOrRanges) {
-      if (inherit_rdi ||
-	  asid_contains(x->rfc3779_asid->rdi->u.asIdsOrRanges, child_rdi)) {
-	child_rdi = x->rfc3779_asid->rdi->u.asIdsOrRanges;
-	inherit_rdi = 0;
-      } else {
-	validation_err(X509_V_ERR_UNNESTED_RESOURCE);
-      }
-    }
-  }
-
-  /*
-   * Trust anchor can't inherit.
-   */
-  if (x->rfc3779_asid != NULL) {
-    if (x->rfc3779_asid->asnum != NULL &&
-	x->rfc3779_asid->asnum->type == ASIdentifierChoice_inherit)
-      validation_err(X509_V_ERR_UNNESTED_RESOURCE);
-    if (x->rfc3779_asid->rdi != NULL &&
-	x->rfc3779_asid->rdi->type == ASIdentifierChoice_inherit)
-      validation_err(X509_V_ERR_UNNESTED_RESOURCE);
-  }
-
- done:
-  return ret;
-}
-
-#undef validation_err
-
-/*
- * RFC 3779 3.3 path validation -- called from X509_verify_cert().
- */
-int v3_asid_validate_path(X509_STORE_CTX *ctx)
-{
-  return v3_asid_validate_path_internal(ctx, ctx->chain, NULL);
-}
-
-/*
- * RFC 3779 3.3 path validation of an extension.
- * Test whether chain covers extension.
- */
-int v3_asid_validate_resource_set(STACK_OF(X509) *chain,
-				  ASIdentifiers *ext,
-				  int allow_inheritance)
-{
-  if (ext == NULL)
-    return 1;
-  if (chain == NULL || sk_X509_num(chain) == 0)
-    return 0;
-  if (!allow_inheritance && v3_asid_inherits(ext))
-    return 0;
-  return v3_asid_validate_path_internal(NULL, chain, ext);
-}
-
-#endif /* OPENSSL_NO_RFC3779 */
diff --git a/crypto/openssl/crypto/x509v3/v3_bcons.c b/crypto/openssl/crypto/x509v3/v3_bcons.c
deleted file mode 100644
index 74b1233071cb..000000000000
--- a/crypto/openssl/crypto/x509v3/v3_bcons.c
+++ /dev/null
@@ -1,124 +0,0 @@
-/* v3_bcons.c */
-/* Written by Dr Stephen N Henson (shenson@bigfoot.com) for the OpenSSL
- * project 1999.
- */
-/* ====================================================================
- * Copyright (c) 1999 The OpenSSL Project.  All rights reserved.
- *
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions
- * are met:
- *
- * 1. Redistributions of source code must retain the above copyright
- *    notice, this list of conditions and the following disclaimer. 
- *
- * 2. Redistributions in binary form must reproduce the above copyright
- *    notice, this list of conditions and the following disclaimer in
- *    the documentation and/or other materials provided with the
- *    distribution.
- *
- * 3. All advertising materials mentioning features or use of this
- *    software must display the following acknowledgment:
- *    "This product includes software developed by the OpenSSL Project
- *    for use in the OpenSSL Toolkit. (http://www.OpenSSL.org/)"
- *
- * 4. The names "OpenSSL Toolkit" and "OpenSSL Project" must not be used to
- *    endorse or promote products derived from this software without
- *    prior written permission. For written permission, please contact
- *    licensing@OpenSSL.org.
- *
- * 5. Products derived from this software may not be called "OpenSSL"
- *    nor may "OpenSSL" appear in their names without prior written
- *    permission of the OpenSSL Project.
- *
- * 6. Redistributions of any form whatsoever must retain the following
- *    acknowledgment:
- *    "This product includes software developed by the OpenSSL Project
- *    for use in the OpenSSL Toolkit (http://www.OpenSSL.org/)"
- *
- * THIS SOFTWARE IS PROVIDED BY THE OpenSSL PROJECT ``AS IS'' AND ANY
- * EXPRESSED OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
- * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR
- * PURPOSE ARE DISCLAIMED.  IN NO EVENT SHALL THE OpenSSL PROJECT OR
- * ITS CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
- * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
- * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
- * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
- * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
- * STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
- * ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED
- * OF THE POSSIBILITY OF SUCH DAMAGE.
- * ====================================================================
- *
- * This product includes cryptographic software written by Eric Young
- * (eay@cryptsoft.com).  This product includes software written by Tim
- * Hudson (tjh@cryptsoft.com).
- *
- */
-
-
-#include <stdio.h>
-#include "cryptlib.h"
-#include <openssl/asn1.h>
-#include <openssl/asn1t.h>
-#include <openssl/conf.h>
-#include <openssl/x509v3.h>
-
-static STACK_OF(CONF_VALUE) *i2v_BASIC_CONSTRAINTS(X509V3_EXT_METHOD *method, BASIC_CONSTRAINTS *bcons, STACK_OF(CONF_VALUE) *extlist);
-static BASIC_CONSTRAINTS *v2i_BASIC_CONSTRAINTS(X509V3_EXT_METHOD *method, X509V3_CTX *ctx, STACK_OF(CONF_VALUE) *values);
-
-const X509V3_EXT_METHOD v3_bcons = {
-NID_basic_constraints, 0,
-ASN1_ITEM_ref(BASIC_CONSTRAINTS),
-0,0,0,0,
-0,0,
-(X509V3_EXT_I2V)i2v_BASIC_CONSTRAINTS,
-(X509V3_EXT_V2I)v2i_BASIC_CONSTRAINTS,
-NULL,NULL,
-NULL
-};
-
-ASN1_SEQUENCE(BASIC_CONSTRAINTS) = {
-	ASN1_OPT(BASIC_CONSTRAINTS, ca, ASN1_FBOOLEAN),
-	ASN1_OPT(BASIC_CONSTRAINTS, pathlen, ASN1_INTEGER)
-} ASN1_SEQUENCE_END(BASIC_CONSTRAINTS)
-
-IMPLEMENT_ASN1_FUNCTIONS(BASIC_CONSTRAINTS)
-
-
-static STACK_OF(CONF_VALUE) *i2v_BASIC_CONSTRAINTS(X509V3_EXT_METHOD *method,
-	     BASIC_CONSTRAINTS *bcons, STACK_OF(CONF_VALUE) *extlist)
-{
-	X509V3_add_value_bool("CA", bcons->ca, &extlist);
-	X509V3_add_value_int("pathlen", bcons->pathlen, &extlist);
-	return extlist;
-}
-
-static BASIC_CONSTRAINTS *v2i_BASIC_CONSTRAINTS(X509V3_EXT_METHOD *method,
-	     X509V3_CTX *ctx, STACK_OF(CONF_VALUE) *values)
-{
-	BASIC_CONSTRAINTS *bcons=NULL;
-	CONF_VALUE *val;
-	int i;
-	if(!(bcons = BASIC_CONSTRAINTS_new())) {
-		X509V3err(X509V3_F_V2I_BASIC_CONSTRAINTS, ERR_R_MALLOC_FAILURE);
-		return NULL;
-	}
-	for(i = 0; i < sk_CONF_VALUE_num(values); i++) {
-		val = sk_CONF_VALUE_value(values, i);
-		if(!strcmp(val->name, "CA")) {
-			if(!X509V3_get_value_bool(val, &bcons->ca)) goto err;
-		} else if(!strcmp(val->name, "pathlen")) {
-			if(!X509V3_get_value_int(val, &bcons->pathlen)) goto err;
-		} else {
-			X509V3err(X509V3_F_V2I_BASIC_CONSTRAINTS, X509V3_R_INVALID_NAME);
-			X509V3_conf_err(val);
-			goto err;
-		}
-	}
-	return bcons;
-	err:
-	BASIC_CONSTRAINTS_free(bcons);
-	return NULL;
-}
-
diff --git a/crypto/openssl/crypto/x509v3/v3_bitst.c b/crypto/openssl/crypto/x509v3/v3_bitst.c
deleted file mode 100644
index cf31f0816eee..000000000000
--- a/crypto/openssl/crypto/x509v3/v3_bitst.c
+++ /dev/null
@@ -1,141 +0,0 @@
-/* v3_bitst.c */
-/* Written by Dr Stephen N Henson (shenson@bigfoot.com) for the OpenSSL
- * project 1999.
- */
-/* ====================================================================
- * Copyright (c) 1999 The OpenSSL Project.  All rights reserved.
- *
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions
- * are met:
- *
- * 1. Redistributions of source code must retain the above copyright
- *    notice, this list of conditions and the following disclaimer. 
- *
- * 2. Redistributions in binary form must reproduce the above copyright
- *    notice, this list of conditions and the following disclaimer in
- *    the documentation and/or other materials provided with the
- *    distribution.
- *
- * 3. All advertising materials mentioning features or use of this
- *    software must display the following acknowledgment:
- *    "This product includes software developed by the OpenSSL Project
- *    for use in the OpenSSL Toolkit. (http://www.OpenSSL.org/)"
- *
- * 4. The names "OpenSSL Toolkit" and "OpenSSL Project" must not be used to
- *    endorse or promote products derived from this software without
- *    prior written permission. For written permission, please contact
- *    licensing@OpenSSL.org.
- *
- * 5. Products derived from this software may not be called "OpenSSL"
- *    nor may "OpenSSL" appear in their names without prior written
- *    permission of the OpenSSL Project.
- *
- * 6. Redistributions of any form whatsoever must retain the following
- *    acknowledgment:
- *    "This product includes software developed by the OpenSSL Project
- *    for use in the OpenSSL Toolkit (http://www.OpenSSL.org/)"
- *
- * THIS SOFTWARE IS PROVIDED BY THE OpenSSL PROJECT ``AS IS'' AND ANY
- * EXPRESSED OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
- * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR
- * PURPOSE ARE DISCLAIMED.  IN NO EVENT SHALL THE OpenSSL PROJECT OR
- * ITS CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
- * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
- * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
- * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
- * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
- * STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
- * ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED
- * OF THE POSSIBILITY OF SUCH DAMAGE.
- * ====================================================================
- *
- * This product includes cryptographic software written by Eric Young
- * (eay@cryptsoft.com).  This product includes software written by Tim
- * Hudson (tjh@cryptsoft.com).
- *
- */
-
-#include <stdio.h>
-#include "cryptlib.h"
-#include <openssl/conf.h>
-#include <openssl/x509v3.h>
-
-static BIT_STRING_BITNAME ns_cert_type_table[] = {
-{0, "SSL Client", "client"},
-{1, "SSL Server", "server"},
-{2, "S/MIME", "email"},
-{3, "Object Signing", "objsign"},
-{4, "Unused", "reserved"},
-{5, "SSL CA", "sslCA"},
-{6, "S/MIME CA", "emailCA"},
-{7, "Object Signing CA", "objCA"},
-{-1, NULL, NULL}
-};
-
-static BIT_STRING_BITNAME key_usage_type_table[] = {
-{0, "Digital Signature", "digitalSignature"},
-{1, "Non Repudiation", "nonRepudiation"},
-{2, "Key Encipherment", "keyEncipherment"},
-{3, "Data Encipherment", "dataEncipherment"},
-{4, "Key Agreement", "keyAgreement"},
-{5, "Certificate Sign", "keyCertSign"},
-{6, "CRL Sign", "cRLSign"},
-{7, "Encipher Only", "encipherOnly"},
-{8, "Decipher Only", "decipherOnly"},
-{-1, NULL, NULL}
-};
-
-
-
-const X509V3_EXT_METHOD v3_nscert = EXT_BITSTRING(NID_netscape_cert_type, ns_cert_type_table);
-const X509V3_EXT_METHOD v3_key_usage = EXT_BITSTRING(NID_key_usage, key_usage_type_table);
-
-STACK_OF(CONF_VALUE) *i2v_ASN1_BIT_STRING(X509V3_EXT_METHOD *method,
-	     ASN1_BIT_STRING *bits, STACK_OF(CONF_VALUE) *ret)
-{
-	BIT_STRING_BITNAME *bnam;
-	for(bnam =method->usr_data; bnam->lname; bnam++) {
-		if(ASN1_BIT_STRING_get_bit(bits, bnam->bitnum)) 
-			X509V3_add_value(bnam->lname, NULL, &ret);
-	}
-	return ret;
-}
-	
-ASN1_BIT_STRING *v2i_ASN1_BIT_STRING(X509V3_EXT_METHOD *method,
-	     X509V3_CTX *ctx, STACK_OF(CONF_VALUE) *nval)
-{
-	CONF_VALUE *val;
-	ASN1_BIT_STRING *bs;
-	int i;
-	BIT_STRING_BITNAME *bnam;
-	if(!(bs = M_ASN1_BIT_STRING_new())) {
-		X509V3err(X509V3_F_V2I_ASN1_BIT_STRING,ERR_R_MALLOC_FAILURE);
-		return NULL;
-	}
-	for(i = 0; i < sk_CONF_VALUE_num(nval); i++) {
-		val = sk_CONF_VALUE_value(nval, i);
-		for(bnam = method->usr_data; bnam->lname; bnam++) {
-			if(!strcmp(bnam->sname, val->name) ||
-				!strcmp(bnam->lname, val->name) ) {
-				if(!ASN1_BIT_STRING_set_bit(bs, bnam->bitnum, 1)) {
-					X509V3err(X509V3_F_V2I_ASN1_BIT_STRING,
-						ERR_R_MALLOC_FAILURE);
-					M_ASN1_BIT_STRING_free(bs);
-					return NULL;
-				}
-				break;
-			}
-		}
-		if(!bnam->lname) {
-			X509V3err(X509V3_F_V2I_ASN1_BIT_STRING,
-					X509V3_R_UNKNOWN_BIT_STRING_ARGUMENT);
-			X509V3_conf_err(val);
-			M_ASN1_BIT_STRING_free(bs);
-			return NULL;
-		}
-	}
-	return bs;
-}
-	
-
diff --git a/crypto/openssl/crypto/x509v3/v3_conf.c b/crypto/openssl/crypto/x509v3/v3_conf.c
deleted file mode 100644
index 2b867305fba1..000000000000
--- a/crypto/openssl/crypto/x509v3/v3_conf.c
+++ /dev/null
@@ -1,524 +0,0 @@
-/* v3_conf.c */
-/* Written by Dr Stephen N Henson (shenson@bigfoot.com) for the OpenSSL
- * project 1999.
- */
-/* ====================================================================
- * Copyright (c) 1999-2002 The OpenSSL Project.  All rights reserved.
- *
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions
- * are met:
- *
- * 1. Redistributions of source code must retain the above copyright
- *    notice, this list of conditions and the following disclaimer. 
- *
- * 2. Redistributions in binary form must reproduce the above copyright
- *    notice, this list of conditions and the following disclaimer in
- *    the documentation and/or other materials provided with the
- *    distribution.
- *
- * 3. All advertising materials mentioning features or use of this
- *    software must display the following acknowledgment:
- *    "This product includes software developed by the OpenSSL Project
- *    for use in the OpenSSL Toolkit. (http://www.OpenSSL.org/)"
- *
- * 4. The names "OpenSSL Toolkit" and "OpenSSL Project" must not be used to
- *    endorse or promote products derived from this software without
- *    prior written permission. For written permission, please contact
- *    licensing@OpenSSL.org.
- *
- * 5. Products derived from this software may not be called "OpenSSL"
- *    nor may "OpenSSL" appear in their names without prior written
- *    permission of the OpenSSL Project.
- *
- * 6. Redistributions of any form whatsoever must retain the following
- *    acknowledgment:
- *    "This product includes software developed by the OpenSSL Project
- *    for use in the OpenSSL Toolkit (http://www.OpenSSL.org/)"
- *
- * THIS SOFTWARE IS PROVIDED BY THE OpenSSL PROJECT ``AS IS'' AND ANY
- * EXPRESSED OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
- * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR
- * PURPOSE ARE DISCLAIMED.  IN NO EVENT SHALL THE OpenSSL PROJECT OR
- * ITS CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
- * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
- * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
- * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
- * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
- * STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
- * ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED
- * OF THE POSSIBILITY OF SUCH DAMAGE.
- * ====================================================================
- *
- * This product includes cryptographic software written by Eric Young
- * (eay@cryptsoft.com).  This product includes software written by Tim
- * Hudson (tjh@cryptsoft.com).
- *
- */
-/* extension creation utilities */
-
-
-
-#include <stdio.h>
-#include <ctype.h>
-#include "cryptlib.h"
-#include <openssl/conf.h>
-#include <openssl/x509.h>
-#include <openssl/x509v3.h>
-
-static int v3_check_critical(char **value);
-static int v3_check_generic(char **value);
-static X509_EXTENSION *do_ext_nconf(CONF *conf, X509V3_CTX *ctx, int ext_nid, int crit, char *value);
-static X509_EXTENSION *v3_generic_extension(const char *ext, char *value, int crit, int type, X509V3_CTX *ctx);
-static char *conf_lhash_get_string(void *db, char *section, char *value);
-static STACK_OF(CONF_VALUE) *conf_lhash_get_section(void *db, char *section);
-static X509_EXTENSION *do_ext_i2d(X509V3_EXT_METHOD *method, int ext_nid,
-						 int crit, void *ext_struc);
-static unsigned char *generic_asn1(char *value, X509V3_CTX *ctx, long *ext_len);
-/* CONF *conf:  Config file    */
-/* char *name:  Name    */
-/* char *value:  Value    */
-X509_EXTENSION *X509V3_EXT_nconf(CONF *conf, X509V3_CTX *ctx, char *name,
-	     char *value)
-	{
-	int crit;
-	int ext_type;
-	X509_EXTENSION *ret;
-	crit = v3_check_critical(&value);
-	if ((ext_type = v3_check_generic(&value))) 
-		return v3_generic_extension(name, value, crit, ext_type, ctx);
-	ret = do_ext_nconf(conf, ctx, OBJ_sn2nid(name), crit, value);
-	if (!ret)
-		{
-		X509V3err(X509V3_F_X509V3_EXT_NCONF,X509V3_R_ERROR_IN_EXTENSION);
-		ERR_add_error_data(4,"name=", name, ", value=", value);
-		}
-	return ret;
-	}
-
-/* CONF *conf:  Config file    */
-/* char *value:  Value    */
-X509_EXTENSION *X509V3_EXT_nconf_nid(CONF *conf, X509V3_CTX *ctx, int ext_nid,
-	     char *value)
-	{
-	int crit;
-	int ext_type;
-	crit = v3_check_critical(&value);
-	if ((ext_type = v3_check_generic(&value))) 
-		return v3_generic_extension(OBJ_nid2sn(ext_nid),
-						 value, crit, ext_type, ctx);
-	return do_ext_nconf(conf, ctx, ext_nid, crit, value);
-	}
-
-/* CONF *conf:  Config file    */
-/* char *value:  Value    */
-static X509_EXTENSION *do_ext_nconf(CONF *conf, X509V3_CTX *ctx, int ext_nid,
-	     int crit, char *value)
-	{
-	X509V3_EXT_METHOD *method;
-	X509_EXTENSION *ext;
-	STACK_OF(CONF_VALUE) *nval;
-	void *ext_struc;
-	if (ext_nid == NID_undef)
-		{
-		X509V3err(X509V3_F_DO_EXT_NCONF,X509V3_R_UNKNOWN_EXTENSION_NAME);
-		return NULL;
-		}
-	if (!(method = X509V3_EXT_get_nid(ext_nid)))
-		{
-		X509V3err(X509V3_F_DO_EXT_NCONF,X509V3_R_UNKNOWN_EXTENSION);
-		return NULL;
-		}
-	/* Now get internal extension representation based on type */
-	if (method->v2i)
-		{
-		if(*value == '@') nval = NCONF_get_section(conf, value + 1);
-		else nval = X509V3_parse_list(value);
-		if(sk_CONF_VALUE_num(nval) <= 0)
-			{
-			X509V3err(X509V3_F_DO_EXT_NCONF,X509V3_R_INVALID_EXTENSION_STRING);
-			ERR_add_error_data(4, "name=", OBJ_nid2sn(ext_nid), ",section=", value);
-			return NULL;
-			}
-		ext_struc = method->v2i(method, ctx, nval);
-		if(*value != '@') sk_CONF_VALUE_pop_free(nval,
-							 X509V3_conf_free);
-		if(!ext_struc) return NULL;
-		}
-	else if(method->s2i)
-		{
-		if(!(ext_struc = method->s2i(method, ctx, value))) return NULL;
-		}
-	else if(method->r2i)
-		{
-		if(!ctx->db || !ctx->db_meth)
-			{
-			X509V3err(X509V3_F_DO_EXT_NCONF,X509V3_R_NO_CONFIG_DATABASE);
-			return NULL;
-			}
-		if(!(ext_struc = method->r2i(method, ctx, value))) return NULL;
-		}
-	else
-		{
-		X509V3err(X509V3_F_DO_EXT_NCONF,X509V3_R_EXTENSION_SETTING_NOT_SUPPORTED);
-		ERR_add_error_data(2, "name=", OBJ_nid2sn(ext_nid));
-		return NULL;
-		}
-
-	ext  = do_ext_i2d(method, ext_nid, crit, ext_struc);
-	if(method->it) ASN1_item_free(ext_struc, ASN1_ITEM_ptr(method->it));
-	else method->ext_free(ext_struc);
-	return ext;
-
-	}
-
-static X509_EXTENSION *do_ext_i2d(X509V3_EXT_METHOD *method, int ext_nid,
-						 int crit, void *ext_struc)
-	{
-	unsigned char *ext_der;
-	int ext_len;
-	ASN1_OCTET_STRING *ext_oct;
-	X509_EXTENSION *ext;
-	/* Convert internal representation to DER */
-	if (method->it)
-		{
-		ext_der = NULL;
-		ext_len = ASN1_item_i2d(ext_struc, &ext_der, ASN1_ITEM_ptr(method->it));
-		if (ext_len < 0) goto merr;
-		}
-	 else
-		{
-		unsigned char *p;
-		ext_len = method->i2d(ext_struc, NULL);
-		if(!(ext_der = OPENSSL_malloc(ext_len))) goto merr;
-		p = ext_der;
-		method->i2d(ext_struc, &p);
-		}
-	if (!(ext_oct = M_ASN1_OCTET_STRING_new())) goto merr;
-	ext_oct->data = ext_der;
-	ext_oct->length = ext_len;
-
-	ext = X509_EXTENSION_create_by_NID(NULL, ext_nid, crit, ext_oct);
-	if (!ext) goto merr;
-	M_ASN1_OCTET_STRING_free(ext_oct);
-
-	return ext;
-
-	merr:
-	X509V3err(X509V3_F_DO_EXT_I2D,ERR_R_MALLOC_FAILURE);
-	return NULL;
-
-	}
-
-/* Given an internal structure, nid and critical flag create an extension */
-
-X509_EXTENSION *X509V3_EXT_i2d(int ext_nid, int crit, void *ext_struc)
-	{
-	X509V3_EXT_METHOD *method;
-	if (!(method = X509V3_EXT_get_nid(ext_nid))) {
-		X509V3err(X509V3_F_X509V3_EXT_I2D,X509V3_R_UNKNOWN_EXTENSION);
-		return NULL;
-	}
-	return do_ext_i2d(method, ext_nid, crit, ext_struc);
-}
-
-/* Check the extension string for critical flag */
-static int v3_check_critical(char **value)
-{
-	char *p = *value;
-	if ((strlen(p) < 9) || strncmp(p, "critical,", 9)) return 0;
-	p+=9;
-	while(isspace((unsigned char)*p)) p++;
-	*value = p;
-	return 1;
-}
-
-/* Check extension string for generic extension and return the type */
-static int v3_check_generic(char **value)
-{
-	int gen_type = 0;
-	char *p = *value;
-	if ((strlen(p) >= 4) && !strncmp(p, "DER:", 4))
-		{
-		p+=4;
-		gen_type = 1;
-		}
-	else if ((strlen(p) >= 5) && !strncmp(p, "ASN1:", 5))
-		{
-		p+=5;
-		gen_type = 2;
-		}
-	else
-		return 0;
-
-	while (isspace((unsigned char)*p)) p++;
-	*value = p;
-	return gen_type;
-}
-
-/* Create a generic extension: for now just handle DER type */
-static X509_EXTENSION *v3_generic_extension(const char *ext, char *value,
-	     int crit, int gen_type, X509V3_CTX *ctx)
-	{
-	unsigned char *ext_der=NULL;
-	long ext_len;
-	ASN1_OBJECT *obj=NULL;
-	ASN1_OCTET_STRING *oct=NULL;
-	X509_EXTENSION *extension=NULL;
-	if (!(obj = OBJ_txt2obj(ext, 0)))
-		{
-		X509V3err(X509V3_F_V3_GENERIC_EXTENSION,X509V3_R_EXTENSION_NAME_ERROR);
-		ERR_add_error_data(2, "name=", ext);
-		goto err;
-		}
-
-	if (gen_type == 1)
-		ext_der = string_to_hex(value, &ext_len);
-	else if (gen_type == 2)
-		ext_der = generic_asn1(value, ctx, &ext_len);
-
-	if (ext_der == NULL)
-		{
-		X509V3err(X509V3_F_V3_GENERIC_EXTENSION,X509V3_R_EXTENSION_VALUE_ERROR);
-		ERR_add_error_data(2, "value=", value);
-		goto err;
-		}
-
-	if (!(oct = M_ASN1_OCTET_STRING_new()))
-		{
-		X509V3err(X509V3_F_V3_GENERIC_EXTENSION,ERR_R_MALLOC_FAILURE);
-		goto err;
-		}
-
-	oct->data = ext_der;
-	oct->length = ext_len;
-	ext_der = NULL;
-
-	extension = X509_EXTENSION_create_by_OBJ(NULL, obj, crit, oct);
-
-	err:
-	ASN1_OBJECT_free(obj);
-	M_ASN1_OCTET_STRING_free(oct);
-	if(ext_der) OPENSSL_free(ext_der);
-	return extension;
-
-	}
-
-static unsigned char *generic_asn1(char *value, X509V3_CTX *ctx, long *ext_len)
-	{
-	ASN1_TYPE *typ;
-	unsigned char *ext_der = NULL;
-	typ = ASN1_generate_v3(value, ctx);
-	if (typ == NULL)
-		return NULL;
-	*ext_len = i2d_ASN1_TYPE(typ, &ext_der);
-	ASN1_TYPE_free(typ);
-	return ext_der;
-	}
-
-/* This is the main function: add a bunch of extensions based on a config file
- * section to an extension STACK.
- */
-
-
-int X509V3_EXT_add_nconf_sk(CONF *conf, X509V3_CTX *ctx, char *section,
-	     STACK_OF(X509_EXTENSION) **sk)
-	{
-	X509_EXTENSION *ext;
-	STACK_OF(CONF_VALUE) *nval;
-	CONF_VALUE *val;	
-	int i;
-	if (!(nval = NCONF_get_section(conf, section))) return 0;
-	for (i = 0; i < sk_CONF_VALUE_num(nval); i++)
-		{
-		val = sk_CONF_VALUE_value(nval, i);
-		if (!(ext = X509V3_EXT_nconf(conf, ctx, val->name, val->value)))
-								return 0;
-		if (sk) X509v3_add_ext(sk, ext, -1);
-		X509_EXTENSION_free(ext);
-		}
-	return 1;
-	}
-
-/* Convenience functions to add extensions to a certificate, CRL and request */
-
-int X509V3_EXT_add_nconf(CONF *conf, X509V3_CTX *ctx, char *section,
-	     X509 *cert)
-	{
-	STACK_OF(X509_EXTENSION) **sk = NULL;
-	if (cert)
-		sk = &cert->cert_info->extensions;
-	return X509V3_EXT_add_nconf_sk(conf, ctx, section, sk);
-	}
-
-/* Same as above but for a CRL */
-
-int X509V3_EXT_CRL_add_nconf(CONF *conf, X509V3_CTX *ctx, char *section,
-	     X509_CRL *crl)
-	{
-	STACK_OF(X509_EXTENSION) **sk = NULL;
-	if (crl)
-		sk = &crl->crl->extensions;
-	return X509V3_EXT_add_nconf_sk(conf, ctx, section, sk);
-	}
-
-/* Add extensions to certificate request */
-
-int X509V3_EXT_REQ_add_nconf(CONF *conf, X509V3_CTX *ctx, char *section,
-	     X509_REQ *req)
-	{
-	STACK_OF(X509_EXTENSION) *extlist = NULL, **sk = NULL;
-	int i;
-	if (req)
-		sk = &extlist;
-	i = X509V3_EXT_add_nconf_sk(conf, ctx, section, sk);
-	if (!i || !sk)
-		return i;
-	i = X509_REQ_add_extensions(req, extlist);
-	sk_X509_EXTENSION_pop_free(extlist, X509_EXTENSION_free);
-	return i;
-	}
-
-/* Config database functions */
-
-char * X509V3_get_string(X509V3_CTX *ctx, char *name, char *section)
-	{
-	if(!ctx->db || !ctx->db_meth || !ctx->db_meth->get_string)
-		{
-		X509V3err(X509V3_F_X509V3_GET_STRING,X509V3_R_OPERATION_NOT_DEFINED);
-		return NULL;
-		}
-	if (ctx->db_meth->get_string)
-			return ctx->db_meth->get_string(ctx->db, name, section);
-	return NULL;
-	}
-
-STACK_OF(CONF_VALUE) * X509V3_get_section(X509V3_CTX *ctx, char *section)
-	{
-	if(!ctx->db || !ctx->db_meth || !ctx->db_meth->get_section)
-		{
-		X509V3err(X509V3_F_X509V3_GET_SECTION,X509V3_R_OPERATION_NOT_DEFINED);
-		return NULL;
-		}
-	if (ctx->db_meth->get_section)
-			return ctx->db_meth->get_section(ctx->db, section);
-	return NULL;
-	}
-
-void X509V3_string_free(X509V3_CTX *ctx, char *str)
-	{
-	if (!str) return;
-	if (ctx->db_meth->free_string)
-			ctx->db_meth->free_string(ctx->db, str);
-	}
-
-void X509V3_section_free(X509V3_CTX *ctx, STACK_OF(CONF_VALUE) *section)
-	{
-	if (!section) return;
-	if (ctx->db_meth->free_section)
-			ctx->db_meth->free_section(ctx->db, section);
-	}
-
-static char *nconf_get_string(void *db, char *section, char *value)
-	{
-	return NCONF_get_string(db, section, value);
-	}
-
-static STACK_OF(CONF_VALUE) *nconf_get_section(void *db, char *section)
-	{
-	return NCONF_get_section(db, section);
-	}
-
-static X509V3_CONF_METHOD nconf_method = {
-nconf_get_string,
-nconf_get_section,
-NULL,
-NULL
-};
-
-void X509V3_set_nconf(X509V3_CTX *ctx, CONF *conf)
-	{
-	ctx->db_meth = &nconf_method;
-	ctx->db = conf;
-	}
-
-void X509V3_set_ctx(X509V3_CTX *ctx, X509 *issuer, X509 *subj, X509_REQ *req,
-	     X509_CRL *crl, int flags)
-	{
-	ctx->issuer_cert = issuer;
-	ctx->subject_cert = subj;
-	ctx->crl = crl;
-	ctx->subject_req = req;
-	ctx->flags = flags;
-	}
-
-/* Old conf compatibility functions */
-
-X509_EXTENSION *X509V3_EXT_conf(LHASH *conf, X509V3_CTX *ctx, char *name,
-	     char *value)
-	{
-	CONF ctmp;
-	CONF_set_nconf(&ctmp, conf);
-	return X509V3_EXT_nconf(&ctmp, ctx, name, value);
-	}
-
-/* LHASH *conf:  Config file    */
-/* char *value:  Value    */
-X509_EXTENSION *X509V3_EXT_conf_nid(LHASH *conf, X509V3_CTX *ctx, int ext_nid,
-	     char *value)
-	{
-	CONF ctmp;
-	CONF_set_nconf(&ctmp, conf);
-	return X509V3_EXT_nconf_nid(&ctmp, ctx, ext_nid, value);
-	}
-
-static char *conf_lhash_get_string(void *db, char *section, char *value)
-	{
-	return CONF_get_string(db, section, value);
-	}
-
-static STACK_OF(CONF_VALUE) *conf_lhash_get_section(void *db, char *section)
-	{
-	return CONF_get_section(db, section);
-	}
-
-static X509V3_CONF_METHOD conf_lhash_method = {
-conf_lhash_get_string,
-conf_lhash_get_section,
-NULL,
-NULL
-};
-
-void X509V3_set_conf_lhash(X509V3_CTX *ctx, LHASH *lhash)
-	{
-	ctx->db_meth = &conf_lhash_method;
-	ctx->db = lhash;
-	}
-
-int X509V3_EXT_add_conf(LHASH *conf, X509V3_CTX *ctx, char *section,
-	     X509 *cert)
-	{
-	CONF ctmp;
-	CONF_set_nconf(&ctmp, conf);
-	return X509V3_EXT_add_nconf(&ctmp, ctx, section, cert);
-	}
-
-/* Same as above but for a CRL */
-
-int X509V3_EXT_CRL_add_conf(LHASH *conf, X509V3_CTX *ctx, char *section,
-	     X509_CRL *crl)
-	{
-	CONF ctmp;
-	CONF_set_nconf(&ctmp, conf);
-	return X509V3_EXT_CRL_add_nconf(&ctmp, ctx, section, crl);
-	}
-
-/* Add extensions to certificate request */
-
-int X509V3_EXT_REQ_add_conf(LHASH *conf, X509V3_CTX *ctx, char *section,
-	     X509_REQ *req)
-	{
-	CONF ctmp;
-	CONF_set_nconf(&ctmp, conf);
-	return X509V3_EXT_REQ_add_nconf(&ctmp, ctx, section, req);
-	}
diff --git a/crypto/openssl/crypto/x509v3/v3_cpols.c b/crypto/openssl/crypto/x509v3/v3_cpols.c
deleted file mode 100644
index a40f490aa904..000000000000
--- a/crypto/openssl/crypto/x509v3/v3_cpols.c
+++ /dev/null
@@ -1,449 +0,0 @@
-/* v3_cpols.c */
-/* Written by Dr Stephen N Henson (shenson@bigfoot.com) for the OpenSSL
- * project 1999.
- */
-/* ====================================================================
- * Copyright (c) 1999-2004 The OpenSSL Project.  All rights reserved.
- *
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions
- * are met:
- *
- * 1. Redistributions of source code must retain the above copyright
- *    notice, this list of conditions and the following disclaimer. 
- *
- * 2. Redistributions in binary form must reproduce the above copyright
- *    notice, this list of conditions and the following disclaimer in
- *    the documentation and/or other materials provided with the
- *    distribution.
- *
- * 3. All advertising materials mentioning features or use of this
- *    software must display the following acknowledgment:
- *    "This product includes software developed by the OpenSSL Project
- *    for use in the OpenSSL Toolkit. (http://www.OpenSSL.org/)"
- *
- * 4. The names "OpenSSL Toolkit" and "OpenSSL Project" must not be used to
- *    endorse or promote products derived from this software without
- *    prior written permission. For written permission, please contact
- *    licensing@OpenSSL.org.
- *
- * 5. Products derived from this software may not be called "OpenSSL"
- *    nor may "OpenSSL" appear in their names without prior written
- *    permission of the OpenSSL Project.
- *
- * 6. Redistributions of any form whatsoever must retain the following
- *    acknowledgment:
- *    "This product includes software developed by the OpenSSL Project
- *    for use in the OpenSSL Toolkit (http://www.OpenSSL.org/)"
- *
- * THIS SOFTWARE IS PROVIDED BY THE OpenSSL PROJECT ``AS IS'' AND ANY
- * EXPRESSED OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
- * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR
- * PURPOSE ARE DISCLAIMED.  IN NO EVENT SHALL THE OpenSSL PROJECT OR
- * ITS CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
- * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
- * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
- * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
- * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
- * STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
- * ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED
- * OF THE POSSIBILITY OF SUCH DAMAGE.
- * ====================================================================
- *
- * This product includes cryptographic software written by Eric Young
- * (eay@cryptsoft.com).  This product includes software written by Tim
- * Hudson (tjh@cryptsoft.com).
- *
- */
-
-#include <stdio.h>
-#include "cryptlib.h"
-#include <openssl/conf.h>
-#include <openssl/asn1.h>
-#include <openssl/asn1t.h>
-#include <openssl/x509v3.h>
-
-#include "pcy_int.h"
-
-/* Certificate policies extension support: this one is a bit complex... */
-
-static int i2r_certpol(X509V3_EXT_METHOD *method, STACK_OF(POLICYINFO) *pol, BIO *out, int indent);
-static STACK_OF(POLICYINFO) *r2i_certpol(X509V3_EXT_METHOD *method, X509V3_CTX *ctx, char *value);
-static void print_qualifiers(BIO *out, STACK_OF(POLICYQUALINFO) *quals, int indent);
-static void print_notice(BIO *out, USERNOTICE *notice, int indent);
-static POLICYINFO *policy_section(X509V3_CTX *ctx,
-				 STACK_OF(CONF_VALUE) *polstrs, int ia5org);
-static POLICYQUALINFO *notice_section(X509V3_CTX *ctx,
-					STACK_OF(CONF_VALUE) *unot, int ia5org);
-static int nref_nos(STACK_OF(ASN1_INTEGER) *nnums, STACK_OF(CONF_VALUE) *nos);
-
-const X509V3_EXT_METHOD v3_cpols = {
-NID_certificate_policies, 0,ASN1_ITEM_ref(CERTIFICATEPOLICIES),
-0,0,0,0,
-0,0,
-0,0,
-(X509V3_EXT_I2R)i2r_certpol,
-(X509V3_EXT_R2I)r2i_certpol,
-NULL
-};
-
-ASN1_ITEM_TEMPLATE(CERTIFICATEPOLICIES) = 
-	ASN1_EX_TEMPLATE_TYPE(ASN1_TFLG_SEQUENCE_OF, 0, CERTIFICATEPOLICIES, POLICYINFO)
-ASN1_ITEM_TEMPLATE_END(CERTIFICATEPOLICIES)
-
-IMPLEMENT_ASN1_FUNCTIONS(CERTIFICATEPOLICIES)
-
-ASN1_SEQUENCE(POLICYINFO) = {
-	ASN1_SIMPLE(POLICYINFO, policyid, ASN1_OBJECT),
-	ASN1_SEQUENCE_OF_OPT(POLICYINFO, qualifiers, POLICYQUALINFO)
-} ASN1_SEQUENCE_END(POLICYINFO)
-
-IMPLEMENT_ASN1_FUNCTIONS(POLICYINFO)
-
-ASN1_ADB_TEMPLATE(policydefault) = ASN1_SIMPLE(POLICYQUALINFO, d.other, ASN1_ANY);
-
-ASN1_ADB(POLICYQUALINFO) = {
-	ADB_ENTRY(NID_id_qt_cps, ASN1_SIMPLE(POLICYQUALINFO, d.cpsuri, ASN1_IA5STRING)),
-	ADB_ENTRY(NID_id_qt_unotice, ASN1_SIMPLE(POLICYQUALINFO, d.usernotice, USERNOTICE))
-} ASN1_ADB_END(POLICYQUALINFO, 0, pqualid, 0, &policydefault_tt, NULL);
-
-ASN1_SEQUENCE(POLICYQUALINFO) = {
-	ASN1_SIMPLE(POLICYQUALINFO, pqualid, ASN1_OBJECT),
-	ASN1_ADB_OBJECT(POLICYQUALINFO)
-} ASN1_SEQUENCE_END(POLICYQUALINFO)
-
-IMPLEMENT_ASN1_FUNCTIONS(POLICYQUALINFO)
-
-ASN1_SEQUENCE(USERNOTICE) = {
-	ASN1_OPT(USERNOTICE, noticeref, NOTICEREF),
-	ASN1_OPT(USERNOTICE, exptext, DISPLAYTEXT)
-} ASN1_SEQUENCE_END(USERNOTICE)
-
-IMPLEMENT_ASN1_FUNCTIONS(USERNOTICE)
-
-ASN1_SEQUENCE(NOTICEREF) = {
-	ASN1_SIMPLE(NOTICEREF, organization, DISPLAYTEXT),
-	ASN1_SEQUENCE_OF(NOTICEREF, noticenos, ASN1_INTEGER)
-} ASN1_SEQUENCE_END(NOTICEREF)
-
-IMPLEMENT_ASN1_FUNCTIONS(NOTICEREF)
-
-static STACK_OF(POLICYINFO) *r2i_certpol(X509V3_EXT_METHOD *method,
-		X509V3_CTX *ctx, char *value)
-{
-	STACK_OF(POLICYINFO) *pols = NULL;
-	char *pstr;
-	POLICYINFO *pol;
-	ASN1_OBJECT *pobj;
-	STACK_OF(CONF_VALUE) *vals;
-	CONF_VALUE *cnf;
-	int i, ia5org;
-	pols = sk_POLICYINFO_new_null();
-	if (pols == NULL) {
-		X509V3err(X509V3_F_R2I_CERTPOL, ERR_R_MALLOC_FAILURE);
-		return NULL;
-	}
-	vals =  X509V3_parse_list(value);
-	if (vals == NULL) {
-		X509V3err(X509V3_F_R2I_CERTPOL, ERR_R_X509V3_LIB);
-		goto err;
-	}
-	ia5org = 0;
-	for(i = 0; i < sk_CONF_VALUE_num(vals); i++) {
-		cnf = sk_CONF_VALUE_value(vals, i);
-		if(cnf->value || !cnf->name ) {
-			X509V3err(X509V3_F_R2I_CERTPOL,X509V3_R_INVALID_POLICY_IDENTIFIER);
-			X509V3_conf_err(cnf);
-			goto err;
-		}
-		pstr = cnf->name;
-		if(!strcmp(pstr,"ia5org")) {
-			ia5org = 1;
-			continue;
-		} else if(*pstr == '@') {
-			STACK_OF(CONF_VALUE) *polsect;
-			polsect = X509V3_get_section(ctx, pstr + 1);
-			if(!polsect) {
-				X509V3err(X509V3_F_R2I_CERTPOL,X509V3_R_INVALID_SECTION);
-
-				X509V3_conf_err(cnf);
-				goto err;
-			}
-			pol = policy_section(ctx, polsect, ia5org);
-			X509V3_section_free(ctx, polsect);
-			if(!pol) goto err;
-		} else {
-			if(!(pobj = OBJ_txt2obj(cnf->name, 0))) {
-				X509V3err(X509V3_F_R2I_CERTPOL,X509V3_R_INVALID_OBJECT_IDENTIFIER);
-				X509V3_conf_err(cnf);
-				goto err;
-			}
-			pol = POLICYINFO_new();
-			pol->policyid = pobj;
-		}
-		sk_POLICYINFO_push(pols, pol);
-	}
-	sk_CONF_VALUE_pop_free(vals, X509V3_conf_free);
-	return pols;
-	err:
-	sk_CONF_VALUE_pop_free(vals, X509V3_conf_free);
-	sk_POLICYINFO_pop_free(pols, POLICYINFO_free);
-	return NULL;
-}
-
-static POLICYINFO *policy_section(X509V3_CTX *ctx,
-				STACK_OF(CONF_VALUE) *polstrs, int ia5org)
-{
-	int i;
-	CONF_VALUE *cnf;
-	POLICYINFO *pol;
-	POLICYQUALINFO *qual;
-	if(!(pol = POLICYINFO_new())) goto merr;
-	for(i = 0; i < sk_CONF_VALUE_num(polstrs); i++) {
-		cnf = sk_CONF_VALUE_value(polstrs, i);
-		if(!strcmp(cnf->name, "policyIdentifier")) {
-			ASN1_OBJECT *pobj;
-			if(!(pobj = OBJ_txt2obj(cnf->value, 0))) {
-				X509V3err(X509V3_F_POLICY_SECTION,X509V3_R_INVALID_OBJECT_IDENTIFIER);
-				X509V3_conf_err(cnf);
-				goto err;
-			}
-			pol->policyid = pobj;
-
-		} else if(!name_cmp(cnf->name, "CPS")) {
-			if(!pol->qualifiers) pol->qualifiers =
-						 sk_POLICYQUALINFO_new_null();
-			if(!(qual = POLICYQUALINFO_new())) goto merr;
-			if(!sk_POLICYQUALINFO_push(pol->qualifiers, qual))
-								 goto merr;
-			qual->pqualid = OBJ_nid2obj(NID_id_qt_cps);
-			qual->d.cpsuri = M_ASN1_IA5STRING_new();
-			if(!ASN1_STRING_set(qual->d.cpsuri, cnf->value,
-						 strlen(cnf->value))) goto merr;
-		} else if(!name_cmp(cnf->name, "userNotice")) {
-			STACK_OF(CONF_VALUE) *unot;
-			if(*cnf->value != '@') {
-				X509V3err(X509V3_F_POLICY_SECTION,X509V3_R_EXPECTED_A_SECTION_NAME);
-				X509V3_conf_err(cnf);
-				goto err;
-			}
-			unot = X509V3_get_section(ctx, cnf->value + 1);
-			if(!unot) {
-				X509V3err(X509V3_F_POLICY_SECTION,X509V3_R_INVALID_SECTION);
-
-				X509V3_conf_err(cnf);
-				goto err;
-			}
-			qual = notice_section(ctx, unot, ia5org);
-			X509V3_section_free(ctx, unot);
-			if(!qual) goto err;
-			if(!pol->qualifiers) pol->qualifiers =
-						 sk_POLICYQUALINFO_new_null();
-			if(!sk_POLICYQUALINFO_push(pol->qualifiers, qual))
-								 goto merr;
-		} else {
-			X509V3err(X509V3_F_POLICY_SECTION,X509V3_R_INVALID_OPTION);
-
-			X509V3_conf_err(cnf);
-			goto err;
-		}
-	}
-	if(!pol->policyid) {
-		X509V3err(X509V3_F_POLICY_SECTION,X509V3_R_NO_POLICY_IDENTIFIER);
-		goto err;
-	}
-
-	return pol;
-
-	merr:
-	X509V3err(X509V3_F_POLICY_SECTION,ERR_R_MALLOC_FAILURE);
-
-	err:
-	POLICYINFO_free(pol);
-	return NULL;
-	
-	
-}
-
-static POLICYQUALINFO *notice_section(X509V3_CTX *ctx,
-					STACK_OF(CONF_VALUE) *unot, int ia5org)
-{
-	int i, ret;
-	CONF_VALUE *cnf;
-	USERNOTICE *not;
-	POLICYQUALINFO *qual;
-	if(!(qual = POLICYQUALINFO_new())) goto merr;
-	qual->pqualid = OBJ_nid2obj(NID_id_qt_unotice);
-	if(!(not = USERNOTICE_new())) goto merr;
-	qual->d.usernotice = not;
-	for(i = 0; i < sk_CONF_VALUE_num(unot); i++) {
-		cnf = sk_CONF_VALUE_value(unot, i);
-		if(!strcmp(cnf->name, "explicitText")) {
-			not->exptext = M_ASN1_VISIBLESTRING_new();
-			if(!ASN1_STRING_set(not->exptext, cnf->value,
-						 strlen(cnf->value))) goto merr;
-		} else if(!strcmp(cnf->name, "organization")) {
-			NOTICEREF *nref;
-			if(!not->noticeref) {
-				if(!(nref = NOTICEREF_new())) goto merr;
-				not->noticeref = nref;
-			} else nref = not->noticeref;
-			if(ia5org) nref->organization->type = V_ASN1_IA5STRING;
-			else nref->organization->type = V_ASN1_VISIBLESTRING;
-			if(!ASN1_STRING_set(nref->organization, cnf->value,
-						 strlen(cnf->value))) goto merr;
-		} else if(!strcmp(cnf->name, "noticeNumbers")) {
-			NOTICEREF *nref;
-			STACK_OF(CONF_VALUE) *nos;
-			if(!not->noticeref) {
-				if(!(nref = NOTICEREF_new())) goto merr;
-				not->noticeref = nref;
-			} else nref = not->noticeref;
-			nos = X509V3_parse_list(cnf->value);
-			if(!nos || !sk_CONF_VALUE_num(nos)) {
-				X509V3err(X509V3_F_NOTICE_SECTION,X509V3_R_INVALID_NUMBERS);
-				X509V3_conf_err(cnf);
-				goto err;
-			}
-			ret = nref_nos(nref->noticenos, nos);
-			sk_CONF_VALUE_pop_free(nos, X509V3_conf_free);
-			if (!ret)
-				goto err;
-		} else {
-			X509V3err(X509V3_F_NOTICE_SECTION,X509V3_R_INVALID_OPTION);
-			X509V3_conf_err(cnf);
-			goto err;
-		}
-	}
-
-	if(not->noticeref && 
-	      (!not->noticeref->noticenos || !not->noticeref->organization)) {
-			X509V3err(X509V3_F_NOTICE_SECTION,X509V3_R_NEED_ORGANIZATION_AND_NUMBERS);
-			goto err;
-	}
-
-	return qual;
-
-	merr:
-	X509V3err(X509V3_F_NOTICE_SECTION,ERR_R_MALLOC_FAILURE);
-
-	err:
-	POLICYQUALINFO_free(qual);
-	return NULL;
-}
-
-static int nref_nos(STACK_OF(ASN1_INTEGER) *nnums, STACK_OF(CONF_VALUE) *nos)
-{
-	CONF_VALUE *cnf;
-	ASN1_INTEGER *aint;
-
-	int i;
-
-	for(i = 0; i < sk_CONF_VALUE_num(nos); i++) {
-		cnf = sk_CONF_VALUE_value(nos, i);
-		if(!(aint = s2i_ASN1_INTEGER(NULL, cnf->name))) {
-			X509V3err(X509V3_F_NREF_NOS,X509V3_R_INVALID_NUMBER);
-			goto err;
-		}
-		if(!sk_ASN1_INTEGER_push(nnums, aint)) goto merr;
-	}
-	return 1;
-
-	merr:
-	X509V3err(X509V3_F_NREF_NOS,ERR_R_MALLOC_FAILURE);
-
-	err:
-	sk_ASN1_INTEGER_pop_free(nnums, ASN1_STRING_free);
-	return 0;
-}
-
-
-static int i2r_certpol(X509V3_EXT_METHOD *method, STACK_OF(POLICYINFO) *pol,
-		BIO *out, int indent)
-{
-	int i;
-	POLICYINFO *pinfo;
-	/* First print out the policy OIDs */
-	for(i = 0; i < sk_POLICYINFO_num(pol); i++) {
-		pinfo = sk_POLICYINFO_value(pol, i);
-		BIO_printf(out, "%*sPolicy: ", indent, "");
-		i2a_ASN1_OBJECT(out, pinfo->policyid);
-		BIO_puts(out, "\n");
-		if(pinfo->qualifiers)
-			 print_qualifiers(out, pinfo->qualifiers, indent + 2);
-	}
-	return 1;
-}
-
-static void print_qualifiers(BIO *out, STACK_OF(POLICYQUALINFO) *quals,
-		int indent)
-{
-	POLICYQUALINFO *qualinfo;
-	int i;
-	for(i = 0; i < sk_POLICYQUALINFO_num(quals); i++) {
-		qualinfo = sk_POLICYQUALINFO_value(quals, i);
-		switch(OBJ_obj2nid(qualinfo->pqualid))
-		{
-			case NID_id_qt_cps:
-			BIO_printf(out, "%*sCPS: %s\n", indent, "",
-						qualinfo->d.cpsuri->data);
-			break;
-		
-			case NID_id_qt_unotice:
-			BIO_printf(out, "%*sUser Notice:\n", indent, "");
-			print_notice(out, qualinfo->d.usernotice, indent + 2);
-			break;
-
-			default:
-			BIO_printf(out, "%*sUnknown Qualifier: ",
-							 indent + 2, "");
-			
-			i2a_ASN1_OBJECT(out, qualinfo->pqualid);
-			BIO_puts(out, "\n");
-			break;
-		}
-	}
-}
-
-static void print_notice(BIO *out, USERNOTICE *notice, int indent)
-{
-	int i;
-	if(notice->noticeref) {
-		NOTICEREF *ref;
-		ref = notice->noticeref;
-		BIO_printf(out, "%*sOrganization: %s\n", indent, "",
-						 ref->organization->data);
-		BIO_printf(out, "%*sNumber%s: ", indent, "",
-			   sk_ASN1_INTEGER_num(ref->noticenos) > 1 ? "s" : "");
-		for(i = 0; i < sk_ASN1_INTEGER_num(ref->noticenos); i++) {
-			ASN1_INTEGER *num;
-			char *tmp;
-			num = sk_ASN1_INTEGER_value(ref->noticenos, i);
-			if(i) BIO_puts(out, ", ");
-			tmp = i2s_ASN1_INTEGER(NULL, num);
-			BIO_puts(out, tmp);
-			OPENSSL_free(tmp);
-		}
-		BIO_puts(out, "\n");
-	}
-	if(notice->exptext)
-		BIO_printf(out, "%*sExplicit Text: %s\n", indent, "",
-							 notice->exptext->data);
-}
-
-void X509_POLICY_NODE_print(BIO *out, X509_POLICY_NODE *node, int indent)
-	{
-	const X509_POLICY_DATA *dat = node->data;
-
-	BIO_printf(out, "%*sPolicy: ", indent, "");
-			
-	i2a_ASN1_OBJECT(out, dat->valid_policy);
-	BIO_puts(out, "\n");
-	BIO_printf(out, "%*s%s\n", indent + 2, "",
-		node_data_critical(dat) ? "Critical" : "Non Critical");
-	if (dat->qualifier_set)
-		print_qualifiers(out, dat->qualifier_set, indent + 2);
-	else
-		BIO_printf(out, "%*sNo Qualifiers\n", indent + 2, "");
-	}
-	
diff --git a/crypto/openssl/crypto/x509v3/v3_crld.c b/crypto/openssl/crypto/x509v3/v3_crld.c
deleted file mode 100644
index c6e3ebae7b28..000000000000
--- a/crypto/openssl/crypto/x509v3/v3_crld.c
+++ /dev/null
@@ -1,162 +0,0 @@
-/* v3_crld.c */
-/* Written by Dr Stephen N Henson (shenson@bigfoot.com) for the OpenSSL
- * project 1999.
- */
-/* ====================================================================
- * Copyright (c) 1999 The OpenSSL Project.  All rights reserved.
- *
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions
- * are met:
- *
- * 1. Redistributions of source code must retain the above copyright
- *    notice, this list of conditions and the following disclaimer. 
- *
- * 2. Redistributions in binary form must reproduce the above copyright
- *    notice, this list of conditions and the following disclaimer in
- *    the documentation and/or other materials provided with the
- *    distribution.
- *
- * 3. All advertising materials mentioning features or use of this
- *    software must display the following acknowledgment:
- *    "This product includes software developed by the OpenSSL Project
- *    for use in the OpenSSL Toolkit. (http://www.OpenSSL.org/)"
- *
- * 4. The names "OpenSSL Toolkit" and "OpenSSL Project" must not be used to
- *    endorse or promote products derived from this software without
- *    prior written permission. For written permission, please contact
- *    licensing@OpenSSL.org.
- *
- * 5. Products derived from this software may not be called "OpenSSL"
- *    nor may "OpenSSL" appear in their names without prior written
- *    permission of the OpenSSL Project.
- *
- * 6. Redistributions of any form whatsoever must retain the following
- *    acknowledgment:
- *    "This product includes software developed by the OpenSSL Project
- *    for use in the OpenSSL Toolkit (http://www.OpenSSL.org/)"
- *
- * THIS SOFTWARE IS PROVIDED BY THE OpenSSL PROJECT ``AS IS'' AND ANY
- * EXPRESSED OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
- * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR
- * PURPOSE ARE DISCLAIMED.  IN NO EVENT SHALL THE OpenSSL PROJECT OR
- * ITS CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
- * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
- * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
- * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
- * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
- * STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
- * ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED
- * OF THE POSSIBILITY OF SUCH DAMAGE.
- * ====================================================================
- *
- * This product includes cryptographic software written by Eric Young
- * (eay@cryptsoft.com).  This product includes software written by Tim
- * Hudson (tjh@cryptsoft.com).
- *
- */
-
-#include <stdio.h>
-#include "cryptlib.h"
-#include <openssl/conf.h>
-#include <openssl/asn1.h>
-#include <openssl/asn1t.h>
-#include <openssl/x509v3.h>
-
-static STACK_OF(CONF_VALUE) *i2v_crld(X509V3_EXT_METHOD *method,
-		STACK_OF(DIST_POINT) *crld, STACK_OF(CONF_VALUE) *extlist);
-static STACK_OF(DIST_POINT) *v2i_crld(X509V3_EXT_METHOD *method,
-				X509V3_CTX *ctx, STACK_OF(CONF_VALUE) *nval);
-
-const X509V3_EXT_METHOD v3_crld = {
-NID_crl_distribution_points, X509V3_EXT_MULTILINE, ASN1_ITEM_ref(CRL_DIST_POINTS),
-0,0,0,0,
-0,0,
-(X509V3_EXT_I2V)i2v_crld,
-(X509V3_EXT_V2I)v2i_crld,
-0,0,
-NULL
-};
-
-static STACK_OF(CONF_VALUE) *i2v_crld(X509V3_EXT_METHOD *method,
-			STACK_OF(DIST_POINT) *crld, STACK_OF(CONF_VALUE) *exts)
-{
-	DIST_POINT *point;
-	int i;
-	for(i = 0; i < sk_DIST_POINT_num(crld); i++) {
-		point = sk_DIST_POINT_value(crld, i);
-		if(point->distpoint) {
-			if(point->distpoint->type == 0)
-				exts = i2v_GENERAL_NAMES(NULL,
-					 point->distpoint->name.fullname, exts);
-		        else X509V3_add_value("RelativeName","<UNSUPPORTED>", &exts);
-		}
-		if(point->reasons) 
-			X509V3_add_value("reasons","<UNSUPPORTED>", &exts);
-		if(point->CRLissuer)
-			X509V3_add_value("CRLissuer","<UNSUPPORTED>", &exts);
-	}
-	return exts;
-}
-
-static STACK_OF(DIST_POINT) *v2i_crld(X509V3_EXT_METHOD *method,
-				X509V3_CTX *ctx, STACK_OF(CONF_VALUE) *nval)
-{
-	STACK_OF(DIST_POINT) *crld = NULL;
-	GENERAL_NAMES *gens = NULL;
-	GENERAL_NAME *gen = NULL;
-	CONF_VALUE *cnf;
-	int i;
-	if(!(crld = sk_DIST_POINT_new_null())) goto merr;
-	for(i = 0; i < sk_CONF_VALUE_num(nval); i++) {
-		DIST_POINT *point;
-		cnf = sk_CONF_VALUE_value(nval, i);
-		if(!(gen = v2i_GENERAL_NAME(method, ctx, cnf))) goto err; 
-		if(!(gens = GENERAL_NAMES_new())) goto merr;
-		if(!sk_GENERAL_NAME_push(gens, gen)) goto merr;
-		gen = NULL;
-		if(!(point = DIST_POINT_new())) goto merr;
-		if(!sk_DIST_POINT_push(crld, point)) {
-			DIST_POINT_free(point);
-			goto merr;
-		}
-		if(!(point->distpoint = DIST_POINT_NAME_new())) goto merr;
-		point->distpoint->name.fullname = gens;
-		point->distpoint->type = 0;
-		gens = NULL;
-	}
-	return crld;
-
-	merr:
-	X509V3err(X509V3_F_V2I_CRLD,ERR_R_MALLOC_FAILURE);
-	err:
-	GENERAL_NAME_free(gen);
-	GENERAL_NAMES_free(gens);
-	sk_DIST_POINT_pop_free(crld, DIST_POINT_free);
-	return NULL;
-}
-
-IMPLEMENT_STACK_OF(DIST_POINT)
-IMPLEMENT_ASN1_SET_OF(DIST_POINT)
-
-
-ASN1_CHOICE(DIST_POINT_NAME) = {
-	ASN1_IMP_SEQUENCE_OF(DIST_POINT_NAME, name.fullname, GENERAL_NAME, 0),
-	ASN1_IMP_SET_OF(DIST_POINT_NAME, name.relativename, X509_NAME_ENTRY, 1)
-} ASN1_CHOICE_END(DIST_POINT_NAME)
-
-IMPLEMENT_ASN1_FUNCTIONS(DIST_POINT_NAME)
-
-ASN1_SEQUENCE(DIST_POINT) = {
-	ASN1_EXP_OPT(DIST_POINT, distpoint, DIST_POINT_NAME, 0),
-	ASN1_IMP_OPT(DIST_POINT, reasons, ASN1_BIT_STRING, 1),
-	ASN1_IMP_SEQUENCE_OF_OPT(DIST_POINT, CRLissuer, GENERAL_NAME, 2)
-} ASN1_SEQUENCE_END(DIST_POINT)
-
-IMPLEMENT_ASN1_FUNCTIONS(DIST_POINT)
-
-ASN1_ITEM_TEMPLATE(CRL_DIST_POINTS) = 
-	ASN1_EX_TEMPLATE_TYPE(ASN1_TFLG_SEQUENCE_OF, 0, CRLDistributionPoints, DIST_POINT)
-ASN1_ITEM_TEMPLATE_END(CRL_DIST_POINTS)
-
-IMPLEMENT_ASN1_FUNCTIONS(CRL_DIST_POINTS)
diff --git a/crypto/openssl/crypto/x509v3/v3_enum.c b/crypto/openssl/crypto/x509v3/v3_enum.c
deleted file mode 100644
index a236cb22e158..000000000000
--- a/crypto/openssl/crypto/x509v3/v3_enum.c
+++ /dev/null
@@ -1,94 +0,0 @@
-/* v3_enum.c */
-/* Written by Dr Stephen N Henson (shenson@bigfoot.com) for the OpenSSL
- * project 1999.
- */
-/* ====================================================================
- * Copyright (c) 1999 The OpenSSL Project.  All rights reserved.
- *
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions
- * are met:
- *
- * 1. Redistributions of source code must retain the above copyright
- *    notice, this list of conditions and the following disclaimer. 
- *
- * 2. Redistributions in binary form must reproduce the above copyright
- *    notice, this list of conditions and the following disclaimer in
- *    the documentation and/or other materials provided with the
- *    distribution.
- *
- * 3. All advertising materials mentioning features or use of this
- *    software must display the following acknowledgment:
- *    "This product includes software developed by the OpenSSL Project
- *    for use in the OpenSSL Toolkit. (http://www.OpenSSL.org/)"
- *
- * 4. The names "OpenSSL Toolkit" and "OpenSSL Project" must not be used to
- *    endorse or promote products derived from this software without
- *    prior written permission. For written permission, please contact
- *    licensing@OpenSSL.org.
- *
- * 5. Products derived from this software may not be called "OpenSSL"
- *    nor may "OpenSSL" appear in their names without prior written
- *    permission of the OpenSSL Project.
- *
- * 6. Redistributions of any form whatsoever must retain the following
- *    acknowledgment:
- *    "This product includes software developed by the OpenSSL Project
- *    for use in the OpenSSL Toolkit (http://www.OpenSSL.org/)"
- *
- * THIS SOFTWARE IS PROVIDED BY THE OpenSSL PROJECT ``AS IS'' AND ANY
- * EXPRESSED OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
- * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR
- * PURPOSE ARE DISCLAIMED.  IN NO EVENT SHALL THE OpenSSL PROJECT OR
- * ITS CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
- * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
- * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
- * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
- * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
- * STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
- * ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED
- * OF THE POSSIBILITY OF SUCH DAMAGE.
- * ====================================================================
- *
- * This product includes cryptographic software written by Eric Young
- * (eay@cryptsoft.com).  This product includes software written by Tim
- * Hudson (tjh@cryptsoft.com).
- *
- */
-
-#include <stdio.h>
-#include "cryptlib.h"
-#include <openssl/x509v3.h>
-
-static ENUMERATED_NAMES crl_reasons[] = {
-{0, "Unspecified", "unspecified"},
-{1, "Key Compromise", "keyCompromise"},
-{2, "CA Compromise", "CACompromise"},
-{3, "Affiliation Changed", "affiliationChanged"},
-{4, "Superseded", "superseded"},
-{5, "Cessation Of Operation", "cessationOfOperation"},
-{6, "Certificate Hold", "certificateHold"},
-{8, "Remove From CRL", "removeFromCRL"},
-{-1, NULL, NULL}
-};
-
-const X509V3_EXT_METHOD v3_crl_reason = { 
-NID_crl_reason, 0, ASN1_ITEM_ref(ASN1_ENUMERATED),
-0,0,0,0,
-(X509V3_EXT_I2S)i2s_ASN1_ENUMERATED_TABLE,
-0,
-0,0,0,0,
-crl_reasons};
-
-
-char *i2s_ASN1_ENUMERATED_TABLE(X509V3_EXT_METHOD *method,
-	     ASN1_ENUMERATED *e)
-{
-	ENUMERATED_NAMES *enam;
-	long strval;
-	strval = ASN1_ENUMERATED_get(e);
-	for(enam = method->usr_data; enam->lname; enam++) {
-		if(strval == enam->bitnum) return BUF_strdup(enam->lname);
-	}
-	return i2s_ASN1_ENUMERATED(method, e);
-}
diff --git a/crypto/openssl/crypto/x509v3/v3_extku.c b/crypto/openssl/crypto/x509v3/v3_extku.c
deleted file mode 100644
index a4efe0031e1f..000000000000
--- a/crypto/openssl/crypto/x509v3/v3_extku.c
+++ /dev/null
@@ -1,142 +0,0 @@
-/* v3_extku.c */
-/* Written by Dr Stephen N Henson (shenson@bigfoot.com) for the OpenSSL
- * project 1999.
- */
-/* ====================================================================
- * Copyright (c) 1999 The OpenSSL Project.  All rights reserved.
- *
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions
- * are met:
- *
- * 1. Redistributions of source code must retain the above copyright
- *    notice, this list of conditions and the following disclaimer. 
- *
- * 2. Redistributions in binary form must reproduce the above copyright
- *    notice, this list of conditions and the following disclaimer in
- *    the documentation and/or other materials provided with the
- *    distribution.
- *
- * 3. All advertising materials mentioning features or use of this
- *    software must display the following acknowledgment:
- *    "This product includes software developed by the OpenSSL Project
- *    for use in the OpenSSL Toolkit. (http://www.OpenSSL.org/)"
- *
- * 4. The names "OpenSSL Toolkit" and "OpenSSL Project" must not be used to
- *    endorse or promote products derived from this software without
- *    prior written permission. For written permission, please contact
- *    licensing@OpenSSL.org.
- *
- * 5. Products derived from this software may not be called "OpenSSL"
- *    nor may "OpenSSL" appear in their names without prior written
- *    permission of the OpenSSL Project.
- *
- * 6. Redistributions of any form whatsoever must retain the following
- *    acknowledgment:
- *    "This product includes software developed by the OpenSSL Project
- *    for use in the OpenSSL Toolkit (http://www.OpenSSL.org/)"
- *
- * THIS SOFTWARE IS PROVIDED BY THE OpenSSL PROJECT ``AS IS'' AND ANY
- * EXPRESSED OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
- * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR
- * PURPOSE ARE DISCLAIMED.  IN NO EVENT SHALL THE OpenSSL PROJECT OR
- * ITS CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
- * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
- * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
- * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
- * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
- * STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
- * ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED
- * OF THE POSSIBILITY OF SUCH DAMAGE.
- * ====================================================================
- *
- * This product includes cryptographic software written by Eric Young
- * (eay@cryptsoft.com).  This product includes software written by Tim
- * Hudson (tjh@cryptsoft.com).
- *
- */
-
-
-#include <stdio.h>
-#include "cryptlib.h"
-#include <openssl/asn1t.h>
-#include <openssl/conf.h>
-#include <openssl/x509v3.h>
-
-static void *v2i_EXTENDED_KEY_USAGE(X509V3_EXT_METHOD *method,
-				X509V3_CTX *ctx, STACK_OF(CONF_VALUE) *nval);
-static STACK_OF(CONF_VALUE) *i2v_EXTENDED_KEY_USAGE(X509V3_EXT_METHOD *method,
-		void *eku, STACK_OF(CONF_VALUE) *extlist);
-
-const X509V3_EXT_METHOD v3_ext_ku = {
-	NID_ext_key_usage, 0,
-	ASN1_ITEM_ref(EXTENDED_KEY_USAGE),
-	0,0,0,0,
-	0,0,
-	i2v_EXTENDED_KEY_USAGE,
-	v2i_EXTENDED_KEY_USAGE,
-	0,0,
-	NULL
-};
-
-/* NB OCSP acceptable responses also is a SEQUENCE OF OBJECT */
-const X509V3_EXT_METHOD v3_ocsp_accresp = {
-	NID_id_pkix_OCSP_acceptableResponses, 0,
-	ASN1_ITEM_ref(EXTENDED_KEY_USAGE),
-	0,0,0,0,
-	0,0,
-	i2v_EXTENDED_KEY_USAGE,
-	v2i_EXTENDED_KEY_USAGE,
-	0,0,
-	NULL
-};
-
-ASN1_ITEM_TEMPLATE(EXTENDED_KEY_USAGE) = 
-	ASN1_EX_TEMPLATE_TYPE(ASN1_TFLG_SEQUENCE_OF, 0, EXTENDED_KEY_USAGE, ASN1_OBJECT)
-ASN1_ITEM_TEMPLATE_END(EXTENDED_KEY_USAGE)
-
-IMPLEMENT_ASN1_FUNCTIONS(EXTENDED_KEY_USAGE)
-
-static STACK_OF(CONF_VALUE) *i2v_EXTENDED_KEY_USAGE(X509V3_EXT_METHOD *method,
-		void *a, STACK_OF(CONF_VALUE) *ext_list)
-{
-	EXTENDED_KEY_USAGE *eku = a;
-	int i;
-	ASN1_OBJECT *obj;
-	char obj_tmp[80];
-	for(i = 0; i < sk_ASN1_OBJECT_num(eku); i++) {
-		obj = sk_ASN1_OBJECT_value(eku, i);
-		i2t_ASN1_OBJECT(obj_tmp, 80, obj);
-		X509V3_add_value(NULL, obj_tmp, &ext_list);
-	}
-	return ext_list;
-}
-
-static void *v2i_EXTENDED_KEY_USAGE(X509V3_EXT_METHOD *method,
-				X509V3_CTX *ctx, STACK_OF(CONF_VALUE) *nval)
-{
-	EXTENDED_KEY_USAGE *extku;
-	char *extval;
-	ASN1_OBJECT *objtmp;
-	CONF_VALUE *val;
-	int i;
-
-	if(!(extku = sk_ASN1_OBJECT_new_null())) {
-		X509V3err(X509V3_F_V2I_EXTENDED_KEY_USAGE,ERR_R_MALLOC_FAILURE);
-		return NULL;
-	}
-
-	for(i = 0; i < sk_CONF_VALUE_num(nval); i++) {
-		val = sk_CONF_VALUE_value(nval, i);
-		if(val->value) extval = val->value;
-		else extval = val->name;
-		if(!(objtmp = OBJ_txt2obj(extval, 0))) {
-			sk_ASN1_OBJECT_pop_free(extku, ASN1_OBJECT_free);
-			X509V3err(X509V3_F_V2I_EXTENDED_KEY_USAGE,X509V3_R_INVALID_OBJECT_IDENTIFIER);
-			X509V3_conf_err(val);
-			return NULL;
-		}
-		sk_ASN1_OBJECT_push(extku, objtmp);
-	}
-	return extku;
-}
diff --git a/crypto/openssl/crypto/x509v3/v3_genn.c b/crypto/openssl/crypto/x509v3/v3_genn.c
deleted file mode 100644
index 650b510980da..000000000000
--- a/crypto/openssl/crypto/x509v3/v3_genn.c
+++ /dev/null
@@ -1,101 +0,0 @@
-/* v3_genn.c */
-/* Written by Dr Stephen N Henson (shenson@bigfoot.com) for the OpenSSL
- * project 1999.
- */
-/* ====================================================================
- * Copyright (c) 1999 The OpenSSL Project.  All rights reserved.
- *
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions
- * are met:
- *
- * 1. Redistributions of source code must retain the above copyright
- *    notice, this list of conditions and the following disclaimer. 
- *
- * 2. Redistributions in binary form must reproduce the above copyright
- *    notice, this list of conditions and the following disclaimer in
- *    the documentation and/or other materials provided with the
- *    distribution.
- *
- * 3. All advertising materials mentioning features or use of this
- *    software must display the following acknowledgment:
- *    "This product includes software developed by the OpenSSL Project
- *    for use in the OpenSSL Toolkit. (http://www.OpenSSL.org/)"
- *
- * 4. The names "OpenSSL Toolkit" and "OpenSSL Project" must not be used to
- *    endorse or promote products derived from this software without
- *    prior written permission. For written permission, please contact
- *    licensing@OpenSSL.org.
- *
- * 5. Products derived from this software may not be called "OpenSSL"
- *    nor may "OpenSSL" appear in their names without prior written
- *    permission of the OpenSSL Project.
- *
- * 6. Redistributions of any form whatsoever must retain the following
- *    acknowledgment:
- *    "This product includes software developed by the OpenSSL Project
- *    for use in the OpenSSL Toolkit (http://www.OpenSSL.org/)"
- *
- * THIS SOFTWARE IS PROVIDED BY THE OpenSSL PROJECT ``AS IS'' AND ANY
- * EXPRESSED OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
- * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR
- * PURPOSE ARE DISCLAIMED.  IN NO EVENT SHALL THE OpenSSL PROJECT OR
- * ITS CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
- * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
- * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
- * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
- * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
- * STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
- * ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED
- * OF THE POSSIBILITY OF SUCH DAMAGE.
- * ====================================================================
- *
- * This product includes cryptographic software written by Eric Young
- * (eay@cryptsoft.com).  This product includes software written by Tim
- * Hudson (tjh@cryptsoft.com).
- *
- */
-
-
-#include <stdio.h>
-#include "cryptlib.h"
-#include <openssl/asn1t.h>
-#include <openssl/conf.h>
-#include <openssl/x509v3.h>
-
-ASN1_SEQUENCE(OTHERNAME) = {
-	ASN1_SIMPLE(OTHERNAME, type_id, ASN1_OBJECT),
-	/* Maybe have a true ANY DEFINED BY later */
-	ASN1_EXP(OTHERNAME, value, ASN1_ANY, 0)
-} ASN1_SEQUENCE_END(OTHERNAME)
-
-IMPLEMENT_ASN1_FUNCTIONS(OTHERNAME)
-
-ASN1_SEQUENCE(EDIPARTYNAME) = {
-	ASN1_IMP_OPT(EDIPARTYNAME, nameAssigner, DIRECTORYSTRING, 0),
-	ASN1_IMP_OPT(EDIPARTYNAME, partyName, DIRECTORYSTRING, 1)
-} ASN1_SEQUENCE_END(EDIPARTYNAME)
-
-IMPLEMENT_ASN1_FUNCTIONS(EDIPARTYNAME)
-
-ASN1_CHOICE(GENERAL_NAME) = {
-	ASN1_IMP(GENERAL_NAME, d.otherName, OTHERNAME, GEN_OTHERNAME),
-	ASN1_IMP(GENERAL_NAME, d.rfc822Name, ASN1_IA5STRING, GEN_EMAIL),
-	ASN1_IMP(GENERAL_NAME, d.dNSName, ASN1_IA5STRING, GEN_DNS),
-	/* Don't decode this */
-	ASN1_IMP(GENERAL_NAME, d.x400Address, ASN1_SEQUENCE, GEN_X400),
-	/* X509_NAME is a CHOICE type so use EXPLICIT */
-	ASN1_EXP(GENERAL_NAME, d.directoryName, X509_NAME, GEN_DIRNAME),
-	ASN1_IMP(GENERAL_NAME, d.ediPartyName, EDIPARTYNAME, GEN_EDIPARTY),
-	ASN1_IMP(GENERAL_NAME, d.uniformResourceIdentifier, ASN1_IA5STRING, GEN_URI),
-	ASN1_IMP(GENERAL_NAME, d.iPAddress, ASN1_OCTET_STRING, GEN_IPADD),
-	ASN1_IMP(GENERAL_NAME, d.registeredID, ASN1_OBJECT, GEN_RID)
-} ASN1_CHOICE_END(GENERAL_NAME)
-
-IMPLEMENT_ASN1_FUNCTIONS(GENERAL_NAME)
-
-ASN1_ITEM_TEMPLATE(GENERAL_NAMES) = 
-	ASN1_EX_TEMPLATE_TYPE(ASN1_TFLG_SEQUENCE_OF, 0, GeneralNames, GENERAL_NAME)
-ASN1_ITEM_TEMPLATE_END(GENERAL_NAMES)
-
-IMPLEMENT_ASN1_FUNCTIONS(GENERAL_NAMES)
diff --git a/crypto/openssl/crypto/x509v3/v3_ia5.c b/crypto/openssl/crypto/x509v3/v3_ia5.c
deleted file mode 100644
index b739ccd03617..000000000000
--- a/crypto/openssl/crypto/x509v3/v3_ia5.c
+++ /dev/null
@@ -1,116 +0,0 @@
-/* v3_ia5.c */
-/* Written by Dr Stephen N Henson (shenson@bigfoot.com) for the OpenSSL
- * project 1999.
- */
-/* ====================================================================
- * Copyright (c) 1999 The OpenSSL Project.  All rights reserved.
- *
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions
- * are met:
- *
- * 1. Redistributions of source code must retain the above copyright
- *    notice, this list of conditions and the following disclaimer. 
- *
- * 2. Redistributions in binary form must reproduce the above copyright
- *    notice, this list of conditions and the following disclaimer in
- *    the documentation and/or other materials provided with the
- *    distribution.
- *
- * 3. All advertising materials mentioning features or use of this
- *    software must display the following acknowledgment:
- *    "This product includes software developed by the OpenSSL Project
- *    for use in the OpenSSL Toolkit. (http://www.OpenSSL.org/)"
- *
- * 4. The names "OpenSSL Toolkit" and "OpenSSL Project" must not be used to
- *    endorse or promote products derived from this software without
- *    prior written permission. For written permission, please contact
- *    licensing@OpenSSL.org.
- *
- * 5. Products derived from this software may not be called "OpenSSL"
- *    nor may "OpenSSL" appear in their names without prior written
- *    permission of the OpenSSL Project.
- *
- * 6. Redistributions of any form whatsoever must retain the following
- *    acknowledgment:
- *    "This product includes software developed by the OpenSSL Project
- *    for use in the OpenSSL Toolkit (http://www.OpenSSL.org/)"
- *
- * THIS SOFTWARE IS PROVIDED BY THE OpenSSL PROJECT ``AS IS'' AND ANY
- * EXPRESSED OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
- * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR
- * PURPOSE ARE DISCLAIMED.  IN NO EVENT SHALL THE OpenSSL PROJECT OR
- * ITS CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
- * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
- * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
- * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
- * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
- * STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
- * ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED
- * OF THE POSSIBILITY OF SUCH DAMAGE.
- * ====================================================================
- *
- * This product includes cryptographic software written by Eric Young
- * (eay@cryptsoft.com).  This product includes software written by Tim
- * Hudson (tjh@cryptsoft.com).
- *
- */
-
-
-#include <stdio.h>
-#include "cryptlib.h"
-#include <openssl/asn1.h>
-#include <openssl/conf.h>
-#include <openssl/x509v3.h>
-
-static char *i2s_ASN1_IA5STRING(X509V3_EXT_METHOD *method, ASN1_IA5STRING *ia5);
-static ASN1_IA5STRING *s2i_ASN1_IA5STRING(X509V3_EXT_METHOD *method, X509V3_CTX *ctx, char *str);
-const X509V3_EXT_METHOD v3_ns_ia5_list[] = { 
-EXT_IA5STRING(NID_netscape_base_url),
-EXT_IA5STRING(NID_netscape_revocation_url),
-EXT_IA5STRING(NID_netscape_ca_revocation_url),
-EXT_IA5STRING(NID_netscape_renewal_url),
-EXT_IA5STRING(NID_netscape_ca_policy_url),
-EXT_IA5STRING(NID_netscape_ssl_server_name),
-EXT_IA5STRING(NID_netscape_comment),
-EXT_END
-};
-
-
-static char *i2s_ASN1_IA5STRING(X509V3_EXT_METHOD *method,
-	     ASN1_IA5STRING *ia5)
-{
-	char *tmp;
-	if(!ia5 || !ia5->length) return NULL;
-	if(!(tmp = OPENSSL_malloc(ia5->length + 1))) {
-		X509V3err(X509V3_F_I2S_ASN1_IA5STRING,ERR_R_MALLOC_FAILURE);
-		return NULL;
-	}
-	memcpy(tmp, ia5->data, ia5->length);
-	tmp[ia5->length] = 0;
-	return tmp;
-}
-
-static ASN1_IA5STRING *s2i_ASN1_IA5STRING(X509V3_EXT_METHOD *method,
-	     X509V3_CTX *ctx, char *str)
-{
-	ASN1_IA5STRING *ia5;
-	if(!str) {
-		X509V3err(X509V3_F_S2I_ASN1_IA5STRING,X509V3_R_INVALID_NULL_ARGUMENT);
-		return NULL;
-	}
-	if(!(ia5 = M_ASN1_IA5STRING_new())) goto err;
-	if(!ASN1_STRING_set((ASN1_STRING *)ia5, (unsigned char*)str,
-			    strlen(str))) {
-		M_ASN1_IA5STRING_free(ia5);
-		goto err;
-	}
-#ifdef CHARSET_EBCDIC
-        ebcdic2ascii(ia5->data, ia5->data, ia5->length);
-#endif /*CHARSET_EBCDIC*/
-	return ia5;
-	err:
-	X509V3err(X509V3_F_S2I_ASN1_IA5STRING,ERR_R_MALLOC_FAILURE);
-	return NULL;
-}
-
diff --git a/crypto/openssl/crypto/x509v3/v3_info.c b/crypto/openssl/crypto/x509v3/v3_info.c
deleted file mode 100644
index e0ef69de4231..000000000000
--- a/crypto/openssl/crypto/x509v3/v3_info.c
+++ /dev/null
@@ -1,193 +0,0 @@
-/* v3_info.c */
-/* Written by Dr Stephen N Henson (shenson@bigfoot.com) for the OpenSSL
- * project 1999.
- */
-/* ====================================================================
- * Copyright (c) 1999 The OpenSSL Project.  All rights reserved.
- *
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions
- * are met:
- *
- * 1. Redistributions of source code must retain the above copyright
- *    notice, this list of conditions and the following disclaimer. 
- *
- * 2. Redistributions in binary form must reproduce the above copyright
- *    notice, this list of conditions and the following disclaimer in
- *    the documentation and/or other materials provided with the
- *    distribution.
- *
- * 3. All advertising materials mentioning features or use of this
- *    software must display the following acknowledgment:
- *    "This product includes software developed by the OpenSSL Project
- *    for use in the OpenSSL Toolkit. (http://www.OpenSSL.org/)"
- *
- * 4. The names "OpenSSL Toolkit" and "OpenSSL Project" must not be used to
- *    endorse or promote products derived from this software without
- *    prior written permission. For written permission, please contact
- *    licensing@OpenSSL.org.
- *
- * 5. Products derived from this software may not be called "OpenSSL"
- *    nor may "OpenSSL" appear in their names without prior written
- *    permission of the OpenSSL Project.
- *
- * 6. Redistributions of any form whatsoever must retain the following
- *    acknowledgment:
- *    "This product includes software developed by the OpenSSL Project
- *    for use in the OpenSSL Toolkit (http://www.OpenSSL.org/)"
- *
- * THIS SOFTWARE IS PROVIDED BY THE OpenSSL PROJECT ``AS IS'' AND ANY
- * EXPRESSED OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
- * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR
- * PURPOSE ARE DISCLAIMED.  IN NO EVENT SHALL THE OpenSSL PROJECT OR
- * ITS CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
- * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
- * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
- * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
- * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
- * STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
- * ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED
- * OF THE POSSIBILITY OF SUCH DAMAGE.
- * ====================================================================
- *
- * This product includes cryptographic software written by Eric Young
- * (eay@cryptsoft.com).  This product includes software written by Tim
- * Hudson (tjh@cryptsoft.com).
- *
- */
-
-#include <stdio.h>
-#include "cryptlib.h"
-#include <openssl/conf.h>
-#include <openssl/asn1.h>
-#include <openssl/asn1t.h>
-#include <openssl/x509v3.h>
-
-static STACK_OF(CONF_VALUE) *i2v_AUTHORITY_INFO_ACCESS(X509V3_EXT_METHOD *method,
-				AUTHORITY_INFO_ACCESS *ainfo,
-						STACK_OF(CONF_VALUE) *ret);
-static AUTHORITY_INFO_ACCESS *v2i_AUTHORITY_INFO_ACCESS(X509V3_EXT_METHOD *method,
-				 X509V3_CTX *ctx, STACK_OF(CONF_VALUE) *nval);
-
-const X509V3_EXT_METHOD v3_info =
-{ NID_info_access, X509V3_EXT_MULTILINE, ASN1_ITEM_ref(AUTHORITY_INFO_ACCESS),
-0,0,0,0,
-0,0,
-(X509V3_EXT_I2V)i2v_AUTHORITY_INFO_ACCESS,
-(X509V3_EXT_V2I)v2i_AUTHORITY_INFO_ACCESS,
-0,0,
-NULL};
-
-const X509V3_EXT_METHOD v3_sinfo =
-{ NID_sinfo_access, X509V3_EXT_MULTILINE, ASN1_ITEM_ref(AUTHORITY_INFO_ACCESS),
-0,0,0,0,
-0,0,
-(X509V3_EXT_I2V)i2v_AUTHORITY_INFO_ACCESS,
-(X509V3_EXT_V2I)v2i_AUTHORITY_INFO_ACCESS,
-0,0,
-NULL};
-
-ASN1_SEQUENCE(ACCESS_DESCRIPTION) = {
-	ASN1_SIMPLE(ACCESS_DESCRIPTION, method, ASN1_OBJECT),
-	ASN1_SIMPLE(ACCESS_DESCRIPTION, location, GENERAL_NAME)
-} ASN1_SEQUENCE_END(ACCESS_DESCRIPTION)
-
-IMPLEMENT_ASN1_FUNCTIONS(ACCESS_DESCRIPTION)
-
-ASN1_ITEM_TEMPLATE(AUTHORITY_INFO_ACCESS) = 
-	ASN1_EX_TEMPLATE_TYPE(ASN1_TFLG_SEQUENCE_OF, 0, GeneralNames, ACCESS_DESCRIPTION)
-ASN1_ITEM_TEMPLATE_END(AUTHORITY_INFO_ACCESS)
-
-IMPLEMENT_ASN1_FUNCTIONS(AUTHORITY_INFO_ACCESS)
-
-static STACK_OF(CONF_VALUE) *i2v_AUTHORITY_INFO_ACCESS(X509V3_EXT_METHOD *method,
-				AUTHORITY_INFO_ACCESS *ainfo,
-						STACK_OF(CONF_VALUE) *ret)
-{
-	ACCESS_DESCRIPTION *desc;
-	int i,nlen;
-	char objtmp[80], *ntmp;
-	CONF_VALUE *vtmp;
-	for(i = 0; i < sk_ACCESS_DESCRIPTION_num(ainfo); i++) {
-		desc = sk_ACCESS_DESCRIPTION_value(ainfo, i);
-		ret = i2v_GENERAL_NAME(method, desc->location, ret);
-		if(!ret) break;
-		vtmp = sk_CONF_VALUE_value(ret, i);
-		i2t_ASN1_OBJECT(objtmp, sizeof objtmp, desc->method);
-		nlen = strlen(objtmp) + strlen(vtmp->name) + 5;
-		ntmp = OPENSSL_malloc(nlen);
-		if(!ntmp) {
-			X509V3err(X509V3_F_I2V_AUTHORITY_INFO_ACCESS,
-					ERR_R_MALLOC_FAILURE);
-			return NULL;
-		}
-		BUF_strlcpy(ntmp, objtmp, nlen);
-		BUF_strlcat(ntmp, " - ", nlen);
-		BUF_strlcat(ntmp, vtmp->name, nlen);
-		OPENSSL_free(vtmp->name);
-		vtmp->name = ntmp;
-		
-	}
-	if(!ret) return sk_CONF_VALUE_new_null();
-	return ret;
-}
-
-static AUTHORITY_INFO_ACCESS *v2i_AUTHORITY_INFO_ACCESS(X509V3_EXT_METHOD *method,
-				 X509V3_CTX *ctx, STACK_OF(CONF_VALUE) *nval)
-{
-	AUTHORITY_INFO_ACCESS *ainfo = NULL;
-	CONF_VALUE *cnf, ctmp;
-	ACCESS_DESCRIPTION *acc;
-	int i, objlen;
-	char *objtmp, *ptmp;
-	if(!(ainfo = sk_ACCESS_DESCRIPTION_new_null())) {
-		X509V3err(X509V3_F_V2I_AUTHORITY_INFO_ACCESS,ERR_R_MALLOC_FAILURE);
-		return NULL;
-	}
-	for(i = 0; i < sk_CONF_VALUE_num(nval); i++) {
-		cnf = sk_CONF_VALUE_value(nval, i);
-		if(!(acc = ACCESS_DESCRIPTION_new())
-			|| !sk_ACCESS_DESCRIPTION_push(ainfo, acc)) {
-			X509V3err(X509V3_F_V2I_AUTHORITY_INFO_ACCESS,ERR_R_MALLOC_FAILURE);
-			goto err;
-		}
-		ptmp = strchr(cnf->name, ';');
-		if(!ptmp) {
-			X509V3err(X509V3_F_V2I_AUTHORITY_INFO_ACCESS,X509V3_R_INVALID_SYNTAX);
-			goto err;
-		}
-		objlen = ptmp - cnf->name;
-		ctmp.name = ptmp + 1;
-		ctmp.value = cnf->value;
-		if(!v2i_GENERAL_NAME_ex(acc->location, method, ctx, &ctmp, 0))
-								 goto err; 
-		if(!(objtmp = OPENSSL_malloc(objlen + 1))) {
-			X509V3err(X509V3_F_V2I_AUTHORITY_INFO_ACCESS,ERR_R_MALLOC_FAILURE);
-			goto err;
-		}
-		strncpy(objtmp, cnf->name, objlen);
-		objtmp[objlen] = 0;
-		acc->method = OBJ_txt2obj(objtmp, 0);
-		if(!acc->method) {
-			X509V3err(X509V3_F_V2I_AUTHORITY_INFO_ACCESS,X509V3_R_BAD_OBJECT);
-			ERR_add_error_data(2, "value=", objtmp);
-			OPENSSL_free(objtmp);
-			goto err;
-		}
-		OPENSSL_free(objtmp);
-
-	}
-	return ainfo;
-	err:
-	sk_ACCESS_DESCRIPTION_pop_free(ainfo, ACCESS_DESCRIPTION_free);
-	return NULL;
-}
-
-int i2a_ACCESS_DESCRIPTION(BIO *bp, ACCESS_DESCRIPTION* a)
-        {
-	i2a_ASN1_OBJECT(bp, a->method);
-#ifdef UNDEF
-	i2a_GENERAL_NAME(bp, a->location);
-#endif
-	return 2;
-	}
diff --git a/crypto/openssl/crypto/x509v3/v3_int.c b/crypto/openssl/crypto/x509v3/v3_int.c
deleted file mode 100644
index 9a48dc1508d3..000000000000
--- a/crypto/openssl/crypto/x509v3/v3_int.c
+++ /dev/null
@@ -1,89 +0,0 @@
-/* v3_int.c */
-/* Written by Dr Stephen N Henson (shenson@bigfoot.com) for the OpenSSL
- * project 1999.
- */
-/* ====================================================================
- * Copyright (c) 1999-2004 The OpenSSL Project.  All rights reserved.
- *
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions
- * are met:
- *
- * 1. Redistributions of source code must retain the above copyright
- *    notice, this list of conditions and the following disclaimer. 
- *
- * 2. Redistributions in binary form must reproduce the above copyright
- *    notice, this list of conditions and the following disclaimer in
- *    the documentation and/or other materials provided with the
- *    distribution.
- *
- * 3. All advertising materials mentioning features or use of this
- *    software must display the following acknowledgment:
- *    "This product includes software developed by the OpenSSL Project
- *    for use in the OpenSSL Toolkit. (http://www.OpenSSL.org/)"
- *
- * 4. The names "OpenSSL Toolkit" and "OpenSSL Project" must not be used to
- *    endorse or promote products derived from this software without
- *    prior written permission. For written permission, please contact
- *    licensing@OpenSSL.org.
- *
- * 5. Products derived from this software may not be called "OpenSSL"
- *    nor may "OpenSSL" appear in their names without prior written
- *    permission of the OpenSSL Project.
- *
- * 6. Redistributions of any form whatsoever must retain the following
- *    acknowledgment:
- *    "This product includes software developed by the OpenSSL Project
- *    for use in the OpenSSL Toolkit (http://www.OpenSSL.org/)"
- *
- * THIS SOFTWARE IS PROVIDED BY THE OpenSSL PROJECT ``AS IS'' AND ANY
- * EXPRESSED OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
- * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR
- * PURPOSE ARE DISCLAIMED.  IN NO EVENT SHALL THE OpenSSL PROJECT OR
- * ITS CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
- * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
- * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
- * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
- * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
- * STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
- * ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED
- * OF THE POSSIBILITY OF SUCH DAMAGE.
- * ====================================================================
- *
- * This product includes cryptographic software written by Eric Young
- * (eay@cryptsoft.com).  This product includes software written by Tim
- * Hudson (tjh@cryptsoft.com).
- *
- */
-
-#include <stdio.h>
-#include "cryptlib.h"
-#include <openssl/x509v3.h>
-
-const X509V3_EXT_METHOD v3_crl_num = { 
-	NID_crl_number, 0, ASN1_ITEM_ref(ASN1_INTEGER),
-	0,0,0,0,
-	(X509V3_EXT_I2S)i2s_ASN1_INTEGER,
-	0,
-	0,0,0,0, NULL};
-
-const X509V3_EXT_METHOD v3_delta_crl = { 
-	NID_delta_crl, 0, ASN1_ITEM_ref(ASN1_INTEGER),
-	0,0,0,0,
-	(X509V3_EXT_I2S)i2s_ASN1_INTEGER,
-	0,
-	0,0,0,0, NULL};
-
-static void * s2i_asn1_int(X509V3_EXT_METHOD *meth, X509V3_CTX *ctx, char *value)
-	{
-	return s2i_ASN1_INTEGER(meth, value);
-	}
-
-const X509V3_EXT_METHOD v3_inhibit_anyp = { 
-	NID_inhibit_any_policy, 0, ASN1_ITEM_ref(ASN1_INTEGER),
-	0,0,0,0,
-	(X509V3_EXT_I2S)i2s_ASN1_INTEGER,
-	(X509V3_EXT_S2I)s2i_asn1_int,
-	0,0,0,0, NULL};
-
-
diff --git a/crypto/openssl/crypto/x509v3/v3_lib.c b/crypto/openssl/crypto/x509v3/v3_lib.c
deleted file mode 100644
index f3015ea610cb..000000000000
--- a/crypto/openssl/crypto/x509v3/v3_lib.c
+++ /dev/null
@@ -1,303 +0,0 @@
-/* v3_lib.c */
-/* Written by Dr Stephen N Henson (shenson@bigfoot.com) for the OpenSSL
- * project 1999.
- */
-/* ====================================================================
- * Copyright (c) 1999 The OpenSSL Project.  All rights reserved.
- *
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions
- * are met:
- *
- * 1. Redistributions of source code must retain the above copyright
- *    notice, this list of conditions and the following disclaimer. 
- *
- * 2. Redistributions in binary form must reproduce the above copyright
- *    notice, this list of conditions and the following disclaimer in
- *    the documentation and/or other materials provided with the
- *    distribution.
- *
- * 3. All advertising materials mentioning features or use of this
- *    software must display the following acknowledgment:
- *    "This product includes software developed by the OpenSSL Project
- *    for use in the OpenSSL Toolkit. (http://www.OpenSSL.org/)"
- *
- * 4. The names "OpenSSL Toolkit" and "OpenSSL Project" must not be used to
- *    endorse or promote products derived from this software without
- *    prior written permission. For written permission, please contact
- *    licensing@OpenSSL.org.
- *
- * 5. Products derived from this software may not be called "OpenSSL"
- *    nor may "OpenSSL" appear in their names without prior written
- *    permission of the OpenSSL Project.
- *
- * 6. Redistributions of any form whatsoever must retain the following
- *    acknowledgment:
- *    "This product includes software developed by the OpenSSL Project
- *    for use in the OpenSSL Toolkit (http://www.OpenSSL.org/)"
- *
- * THIS SOFTWARE IS PROVIDED BY THE OpenSSL PROJECT ``AS IS'' AND ANY
- * EXPRESSED OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
- * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR
- * PURPOSE ARE DISCLAIMED.  IN NO EVENT SHALL THE OpenSSL PROJECT OR
- * ITS CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
- * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
- * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
- * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
- * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
- * STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
- * ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED
- * OF THE POSSIBILITY OF SUCH DAMAGE.
- * ====================================================================
- *
- * This product includes cryptographic software written by Eric Young
- * (eay@cryptsoft.com).  This product includes software written by Tim
- * Hudson (tjh@cryptsoft.com).
- *
- */
-/* X509 v3 extension utilities */
-
-#include <stdio.h>
-#include "cryptlib.h"
-#include <openssl/conf.h>
-#include <openssl/x509v3.h>
-
-#include "ext_dat.h"
-
-static STACK_OF(X509V3_EXT_METHOD) *ext_list = NULL;
-
-static int ext_cmp(const X509V3_EXT_METHOD * const *a,
-		const X509V3_EXT_METHOD * const *b);
-static void ext_list_free(X509V3_EXT_METHOD *ext);
-
-int X509V3_EXT_add(X509V3_EXT_METHOD *ext)
-{
-	if(!ext_list && !(ext_list = sk_X509V3_EXT_METHOD_new(ext_cmp))) {
-		X509V3err(X509V3_F_X509V3_EXT_ADD,ERR_R_MALLOC_FAILURE);
-		return 0;
-	}
-	if(!sk_X509V3_EXT_METHOD_push(ext_list, ext)) {
-		X509V3err(X509V3_F_X509V3_EXT_ADD,ERR_R_MALLOC_FAILURE);
-		return 0;
-	}
-	return 1;
-}
-
-static int ext_cmp(const X509V3_EXT_METHOD * const *a,
-		const X509V3_EXT_METHOD * const *b)
-{
-	return ((*a)->ext_nid - (*b)->ext_nid);
-}
-
-X509V3_EXT_METHOD *X509V3_EXT_get_nid(int nid)
-{
-	X509V3_EXT_METHOD tmp, *t = &tmp, **ret;
-	int idx;
-	if(nid < 0) return NULL;
-	tmp.ext_nid = nid;
-	ret = (X509V3_EXT_METHOD **) OBJ_bsearch((char *)&t,
-			(char *)standard_exts, STANDARD_EXTENSION_COUNT,
-			sizeof(X509V3_EXT_METHOD *), (int (*)(const void *, const void *))ext_cmp);
-	if(ret) return *ret;
-	if(!ext_list) return NULL;
-	idx = sk_X509V3_EXT_METHOD_find(ext_list, &tmp);
-	if(idx == -1) return NULL;
-	return sk_X509V3_EXT_METHOD_value(ext_list, idx);
-}
-
-X509V3_EXT_METHOD *X509V3_EXT_get(X509_EXTENSION *ext)
-{
-	int nid;
-	if((nid = OBJ_obj2nid(ext->object)) == NID_undef) return NULL;
-	return X509V3_EXT_get_nid(nid);
-}
-
-
-int X509V3_EXT_add_list(X509V3_EXT_METHOD *extlist)
-{
-	for(;extlist->ext_nid!=-1;extlist++) 
-			if(!X509V3_EXT_add(extlist)) return 0;
-	return 1;
-}
-
-int X509V3_EXT_add_alias(int nid_to, int nid_from)
-{
-	X509V3_EXT_METHOD *ext, *tmpext;
-	if(!(ext = X509V3_EXT_get_nid(nid_from))) {
-		X509V3err(X509V3_F_X509V3_EXT_ADD_ALIAS,X509V3_R_EXTENSION_NOT_FOUND);
-		return 0;
-	}
-	if(!(tmpext = (X509V3_EXT_METHOD *)OPENSSL_malloc(sizeof(X509V3_EXT_METHOD)))) {
-		X509V3err(X509V3_F_X509V3_EXT_ADD_ALIAS,ERR_R_MALLOC_FAILURE);
-		return 0;
-	}
-	*tmpext = *ext;
-	tmpext->ext_nid = nid_to;
-	tmpext->ext_flags |= X509V3_EXT_DYNAMIC;
-	return X509V3_EXT_add(tmpext);
-}
-
-void X509V3_EXT_cleanup(void)
-{
-	sk_X509V3_EXT_METHOD_pop_free(ext_list, ext_list_free);
-	ext_list = NULL;
-}
-
-static void ext_list_free(X509V3_EXT_METHOD *ext)
-{
-	if(ext->ext_flags & X509V3_EXT_DYNAMIC) OPENSSL_free(ext);
-}
-
-/* Legacy function: we don't need to add standard extensions
- * any more because they are now kept in ext_dat.h.
- */
-
-int X509V3_add_standard_extensions(void)
-{
-	return 1;
-}
-
-/* Return an extension internal structure */
-
-void *X509V3_EXT_d2i(X509_EXTENSION *ext)
-{
-	X509V3_EXT_METHOD *method;
-	const unsigned char *p;
-
-	if(!(method = X509V3_EXT_get(ext))) return NULL;
-	p = ext->value->data;
-	if(method->it) return ASN1_item_d2i(NULL, &p, ext->value->length, ASN1_ITEM_ptr(method->it));
-	return method->d2i(NULL, &p, ext->value->length);
-}
-
-/* Get critical flag and decoded version of extension from a NID.
- * The "idx" variable returns the last found extension and can
- * be used to retrieve multiple extensions of the same NID.
- * However multiple extensions with the same NID is usually
- * due to a badly encoded certificate so if idx is NULL we
- * choke if multiple extensions exist.
- * The "crit" variable is set to the critical value.
- * The return value is the decoded extension or NULL on
- * error. The actual error can have several different causes,
- * the value of *crit reflects the cause:
- * >= 0, extension found but not decoded (reflects critical value).
- * -1 extension not found.
- * -2 extension occurs more than once.
- */
-
-void *X509V3_get_d2i(STACK_OF(X509_EXTENSION) *x, int nid, int *crit, int *idx)
-{
-	int lastpos, i;
-	X509_EXTENSION *ex, *found_ex = NULL;
-	if(!x) {
-		if(idx) *idx = -1;
-		if(crit) *crit = -1;
-		return NULL;
-	}
-	if(idx) lastpos = *idx + 1;
-	else lastpos = 0;
-	if(lastpos < 0) lastpos = 0;
-	for(i = lastpos; i < sk_X509_EXTENSION_num(x); i++)
-	{
-		ex = sk_X509_EXTENSION_value(x, i);
-		if(OBJ_obj2nid(ex->object) == nid) {
-			if(idx) {
-				*idx = i;
-				found_ex = ex;
-				break;
-			} else if(found_ex) {
-				/* Found more than one */
-				if(crit) *crit = -2;
-				return NULL;
-			}
-			found_ex = ex;
-		}
-	}
-	if(found_ex) {
-		/* Found it */
-		if(crit) *crit = X509_EXTENSION_get_critical(found_ex);
-		return X509V3_EXT_d2i(found_ex);
-	}
-
-	/* Extension not found */
-	if(idx) *idx = -1;
-	if(crit) *crit = -1;
-	return NULL;
-}
-
-/* This function is a general extension append, replace and delete utility.
- * The precise operation is governed by the 'flags' value. The 'crit' and
- * 'value' arguments (if relevant) are the extensions internal structure.
- */
-
-int X509V3_add1_i2d(STACK_OF(X509_EXTENSION) **x, int nid, void *value,
-					int crit, unsigned long flags)
-{
-	int extidx = -1;
-	int errcode;
-	X509_EXTENSION *ext, *extmp;
-	unsigned long ext_op = flags & X509V3_ADD_OP_MASK;
-
-	/* If appending we don't care if it exists, otherwise
-	 * look for existing extension.
-	 */
-	if(ext_op != X509V3_ADD_APPEND)
-		extidx = X509v3_get_ext_by_NID(*x, nid, -1);
-
-	/* See if extension exists */
-	if(extidx >= 0) {
-		/* If keep existing, nothing to do */
-		if(ext_op == X509V3_ADD_KEEP_EXISTING)
-			return 1;
-		/* If default then its an error */
-		if(ext_op == X509V3_ADD_DEFAULT) {
-			errcode = X509V3_R_EXTENSION_EXISTS;
-			goto err;
-		}
-		/* If delete, just delete it */
-		if(ext_op == X509V3_ADD_DELETE) {
-			if(!sk_X509_EXTENSION_delete(*x, extidx)) return -1;
-			return 1;
-		}
-	} else {
-		/* If replace existing or delete, error since 
-		 * extension must exist
-		 */
-		if((ext_op == X509V3_ADD_REPLACE_EXISTING) ||
-		   (ext_op == X509V3_ADD_DELETE)) {
-			errcode = X509V3_R_EXTENSION_NOT_FOUND;
-			goto err;
-		}
-	}
-
-	/* If we get this far then we have to create an extension:
-	 * could have some flags for alternative encoding schemes...
-	 */
-
-	ext = X509V3_EXT_i2d(nid, crit, value);
-
-	if(!ext) {
-		X509V3err(X509V3_F_X509V3_ADD1_I2D, X509V3_R_ERROR_CREATING_EXTENSION);
-		return 0;
-	}
-
-	/* If extension exists replace it.. */
-	if(extidx >= 0) {
-		extmp = sk_X509_EXTENSION_value(*x, extidx);
-		X509_EXTENSION_free(extmp);
-		if(!sk_X509_EXTENSION_set(*x, extidx, ext)) return -1;
-		return 1;
-	}
-
-	if(!*x && !(*x = sk_X509_EXTENSION_new_null())) return -1;
-	if(!sk_X509_EXTENSION_push(*x, ext)) return -1;
-
-	return 1;
-
-	err:
-	if(!(flags & X509V3_ADD_SILENT))
-		X509V3err(X509V3_F_X509V3_ADD1_I2D, errcode);
-	return 0;
-}
-
-IMPLEMENT_STACK_OF(X509V3_EXT_METHOD)
diff --git a/crypto/openssl/crypto/x509v3/v3_ncons.c b/crypto/openssl/crypto/x509v3/v3_ncons.c
deleted file mode 100644
index 42e7f5a8797b..000000000000
--- a/crypto/openssl/crypto/x509v3/v3_ncons.c
+++ /dev/null
@@ -1,220 +0,0 @@
-/* v3_ncons.c */
-/* Written by Dr Stephen N Henson (shenson@bigfoot.com) for the OpenSSL
- * project.
- */
-/* ====================================================================
- * Copyright (c) 2003 The OpenSSL Project.  All rights reserved.
- *
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions
- * are met:
- *
- * 1. Redistributions of source code must retain the above copyright
- *    notice, this list of conditions and the following disclaimer. 
- *
- * 2. Redistributions in binary form must reproduce the above copyright
- *    notice, this list of conditions and the following disclaimer in
- *    the documentation and/or other materials provided with the
- *    distribution.
- *
- * 3. All advertising materials mentioning features or use of this
- *    software must display the following acknowledgment:
- *    "This product includes software developed by the OpenSSL Project
- *    for use in the OpenSSL Toolkit. (http://www.OpenSSL.org/)"
- *
- * 4. The names "OpenSSL Toolkit" and "OpenSSL Project" must not be used to
- *    endorse or promote products derived from this software without
- *    prior written permission. For written permission, please contact
- *    licensing@OpenSSL.org.
- *
- * 5. Products derived from this software may not be called "OpenSSL"
- *    nor may "OpenSSL" appear in their names without prior written
- *    permission of the OpenSSL Project.
- *
- * 6. Redistributions of any form whatsoever must retain the following
- *    acknowledgment:
- *    "This product includes software developed by the OpenSSL Project
- *    for use in the OpenSSL Toolkit (http://www.OpenSSL.org/)"
- *
- * THIS SOFTWARE IS PROVIDED BY THE OpenSSL PROJECT ``AS IS'' AND ANY
- * EXPRESSED OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
- * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR
- * PURPOSE ARE DISCLAIMED.  IN NO EVENT SHALL THE OpenSSL PROJECT OR
- * ITS CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
- * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
- * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
- * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
- * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
- * STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
- * ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED
- * OF THE POSSIBILITY OF SUCH DAMAGE.
- * ====================================================================
- *
- * This product includes cryptographic software written by Eric Young
- * (eay@cryptsoft.com).  This product includes software written by Tim
- * Hudson (tjh@cryptsoft.com).
- *
- */
-
-
-#include <stdio.h>
-#include "cryptlib.h"
-#include <openssl/asn1t.h>
-#include <openssl/conf.h>
-#include <openssl/x509v3.h>
-
-static void *v2i_NAME_CONSTRAINTS(X509V3_EXT_METHOD *method,
-				X509V3_CTX *ctx, STACK_OF(CONF_VALUE) *nval);
-static int i2r_NAME_CONSTRAINTS(X509V3_EXT_METHOD *method, 
-				void *a, BIO *bp, int ind);
-static int do_i2r_name_constraints(X509V3_EXT_METHOD *method,
-				STACK_OF(GENERAL_SUBTREE) *trees,
-					BIO *bp, int ind, char *name);
-static int print_nc_ipadd(BIO *bp, ASN1_OCTET_STRING *ip);
-
-const X509V3_EXT_METHOD v3_name_constraints = {
-	NID_name_constraints, 0,
-	ASN1_ITEM_ref(NAME_CONSTRAINTS),
-	0,0,0,0,
-	0,0,
-	0, v2i_NAME_CONSTRAINTS,
-	i2r_NAME_CONSTRAINTS,0,
-	NULL
-};
-
-ASN1_SEQUENCE(GENERAL_SUBTREE) = {
-	ASN1_SIMPLE(GENERAL_SUBTREE, base, GENERAL_NAME),
-	ASN1_IMP_OPT(GENERAL_SUBTREE, minimum, ASN1_INTEGER, 0),
-	ASN1_IMP_OPT(GENERAL_SUBTREE, maximum, ASN1_INTEGER, 1)
-} ASN1_SEQUENCE_END(GENERAL_SUBTREE)
-
-ASN1_SEQUENCE(NAME_CONSTRAINTS) = {
-	ASN1_IMP_SEQUENCE_OF_OPT(NAME_CONSTRAINTS, permittedSubtrees,
-							GENERAL_SUBTREE, 0),
-	ASN1_IMP_SEQUENCE_OF_OPT(NAME_CONSTRAINTS, excludedSubtrees,
-							GENERAL_SUBTREE, 1),
-} ASN1_SEQUENCE_END(NAME_CONSTRAINTS)
-	
-
-IMPLEMENT_ASN1_ALLOC_FUNCTIONS(GENERAL_SUBTREE)
-IMPLEMENT_ASN1_ALLOC_FUNCTIONS(NAME_CONSTRAINTS)
-
-static void *v2i_NAME_CONSTRAINTS(X509V3_EXT_METHOD *method,
-				X509V3_CTX *ctx, STACK_OF(CONF_VALUE) *nval)
-	{
-	int i;
-	CONF_VALUE tval, *val;
-	STACK_OF(GENERAL_SUBTREE) **ptree = NULL;
-	NAME_CONSTRAINTS *ncons = NULL;
-	GENERAL_SUBTREE *sub = NULL;
-	ncons = NAME_CONSTRAINTS_new();
-	if (!ncons)
-		goto memerr;
-	for(i = 0; i < sk_CONF_VALUE_num(nval); i++)
-		{
-		val = sk_CONF_VALUE_value(nval, i);
-		if (!strncmp(val->name, "permitted", 9) && val->name[9])
-			{
-			ptree = &ncons->permittedSubtrees;
-			tval.name = val->name + 10;
-			}
-		else if (!strncmp(val->name, "excluded", 8) && val->name[8])
-			{
-			ptree = &ncons->excludedSubtrees;
-			tval.name = val->name + 9;
-			}
-		else
-			{
-			X509V3err(X509V3_F_V2I_NAME_CONSTRAINTS, X509V3_R_INVALID_SYNTAX);
-			goto err;
-			}
-		tval.value = val->value;
-		sub = GENERAL_SUBTREE_new();
-		if (!v2i_GENERAL_NAME_ex(sub->base, method, ctx, &tval, 1))
-			goto err;
-		if (!*ptree)
-			*ptree = sk_GENERAL_SUBTREE_new_null();
-		if (!*ptree || !sk_GENERAL_SUBTREE_push(*ptree, sub))
-			goto memerr;
-		sub = NULL;
-		}
-
-	return ncons;
-
-	memerr:
-	X509V3err(X509V3_F_V2I_NAME_CONSTRAINTS, ERR_R_MALLOC_FAILURE);
-	err:
-	if (ncons)
-		NAME_CONSTRAINTS_free(ncons);
-	if (sub)
-		GENERAL_SUBTREE_free(sub);
-
-	return NULL;
-	}
-			
-
-	
-
-static int i2r_NAME_CONSTRAINTS(X509V3_EXT_METHOD *method,
-				void *a, BIO *bp, int ind)
-	{
-	NAME_CONSTRAINTS *ncons = a;
-	do_i2r_name_constraints(method, ncons->permittedSubtrees,
-					bp, ind, "Permitted");
-	do_i2r_name_constraints(method, ncons->excludedSubtrees,
-					bp, ind, "Excluded");
-	return 1;
-	}
-
-static int do_i2r_name_constraints(X509V3_EXT_METHOD *method,
-				STACK_OF(GENERAL_SUBTREE) *trees,
-					BIO *bp, int ind, char *name)
-	{
-	GENERAL_SUBTREE *tree;
-	int i;
-	if (sk_GENERAL_SUBTREE_num(trees) > 0)
-		BIO_printf(bp, "%*s%s:\n", ind, "", name);
-	for(i = 0; i < sk_GENERAL_SUBTREE_num(trees); i++)
-		{
-		tree = sk_GENERAL_SUBTREE_value(trees, i);
-		BIO_printf(bp, "%*s", ind + 2, "");
-		if (tree->base->type == GEN_IPADD)
-			print_nc_ipadd(bp, tree->base->d.ip);
-		else
-			GENERAL_NAME_print(bp, tree->base);
-		tree = sk_GENERAL_SUBTREE_value(trees, i);
-		BIO_puts(bp, "\n");
-		}
-	return 1;
-	}
-
-static int print_nc_ipadd(BIO *bp, ASN1_OCTET_STRING *ip)
-	{
-	int i, len;
-	unsigned char *p;
-	p = ip->data;
-	len = ip->length;
-	BIO_puts(bp, "IP:");
-	if(len == 8)
-		{
-		BIO_printf(bp, "%d.%d.%d.%d/%d.%d.%d.%d",
-				p[0], p[1], p[2], p[3],
-				p[4], p[5], p[6], p[7]);
-		}
-	else if(len == 32)
-		{
-		for (i = 0; i < 16; i++)
-			{
-			BIO_printf(bp, "%X", p[0] << 8 | p[1]);
-			p += 2;
-			if (i == 7)
-				BIO_puts(bp, "/");
-			else if (i != 15)
-				BIO_puts(bp, ":");
-			}
-		}
-	else
-		BIO_printf(bp, "IP Address:<invalid>");
-	return 1;
-	}
-
diff --git a/crypto/openssl/crypto/x509v3/v3_ocsp.c b/crypto/openssl/crypto/x509v3/v3_ocsp.c
deleted file mode 100644
index 62aac0633531..000000000000
--- a/crypto/openssl/crypto/x509v3/v3_ocsp.c
+++ /dev/null
@@ -1,275 +0,0 @@
-/* v3_ocsp.c */
-/* Written by Dr Stephen N Henson (shenson@bigfoot.com) for the OpenSSL
- * project 1999.
- */
-/* ====================================================================
- * Copyright (c) 1999 The OpenSSL Project.  All rights reserved.
- *
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions
- * are met:
- *
- * 1. Redistributions of source code must retain the above copyright
- *    notice, this list of conditions and the following disclaimer. 
- *
- * 2. Redistributions in binary form must reproduce the above copyright
- *    notice, this list of conditions and the following disclaimer in
- *    the documentation and/or other materials provided with the
- *    distribution.
- *
- * 3. All advertising materials mentioning features or use of this
- *    software must display the following acknowledgment:
- *    "This product includes software developed by the OpenSSL Project
- *    for use in the OpenSSL Toolkit. (http://www.OpenSSL.org/)"
- *
- * 4. The names "OpenSSL Toolkit" and "OpenSSL Project" must not be used to
- *    endorse or promote products derived from this software without
- *    prior written permission. For written permission, please contact
- *    licensing@OpenSSL.org.
- *
- * 5. Products derived from this software may not be called "OpenSSL"
- *    nor may "OpenSSL" appear in their names without prior written
- *    permission of the OpenSSL Project.
- *
- * 6. Redistributions of any form whatsoever must retain the following
- *    acknowledgment:
- *    "This product includes software developed by the OpenSSL Project
- *    for use in the OpenSSL Toolkit (http://www.OpenSSL.org/)"
- *
- * THIS SOFTWARE IS PROVIDED BY THE OpenSSL PROJECT ``AS IS'' AND ANY
- * EXPRESSED OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
- * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR
- * PURPOSE ARE DISCLAIMED.  IN NO EVENT SHALL THE OpenSSL PROJECT OR
- * ITS CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
- * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
- * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
- * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
- * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
- * STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
- * ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED
- * OF THE POSSIBILITY OF SUCH DAMAGE.
- * ====================================================================
- *
- * This product includes cryptographic software written by Eric Young
- * (eay@cryptsoft.com).  This product includes software written by Tim
- * Hudson (tjh@cryptsoft.com).
- *
- */
-
-#ifndef OPENSSL_NO_OCSP
-
-#include <stdio.h>
-#include "cryptlib.h"
-#include <openssl/conf.h>
-#include <openssl/asn1.h>
-#include <openssl/ocsp.h>
-#include <openssl/x509v3.h>
-
-/* OCSP extensions and a couple of CRL entry extensions
- */
-
-static int i2r_ocsp_crlid(X509V3_EXT_METHOD *method, void *nonce, BIO *out, int indent);
-static int i2r_ocsp_acutoff(X509V3_EXT_METHOD *method, void *nonce, BIO *out, int indent);
-static int i2r_object(X509V3_EXT_METHOD *method, void *obj, BIO *out, int indent);
-
-static void *ocsp_nonce_new(void);
-static int i2d_ocsp_nonce(void *a, unsigned char **pp);
-static void *d2i_ocsp_nonce(void *a, const unsigned char **pp, long length);
-static void ocsp_nonce_free(void *a);
-static int i2r_ocsp_nonce(X509V3_EXT_METHOD *method, void *nonce, BIO *out, int indent);
-
-static int i2r_ocsp_nocheck(X509V3_EXT_METHOD *method, void *nocheck, BIO *out, int indent);
-static void *s2i_ocsp_nocheck(X509V3_EXT_METHOD *method, X509V3_CTX *ctx, const char *str);
-static int i2r_ocsp_serviceloc(X509V3_EXT_METHOD *method, void *in, BIO *bp, int ind);
-
-const X509V3_EXT_METHOD v3_ocsp_crlid = {
-	NID_id_pkix_OCSP_CrlID, 0, ASN1_ITEM_ref(OCSP_CRLID),
-	0,0,0,0,
-	0,0,
-	0,0,
-	i2r_ocsp_crlid,0,
-	NULL
-};
-
-const X509V3_EXT_METHOD v3_ocsp_acutoff = {
-	NID_id_pkix_OCSP_archiveCutoff, 0, ASN1_ITEM_ref(ASN1_GENERALIZEDTIME),
-	0,0,0,0,
-	0,0,
-	0,0,
-	i2r_ocsp_acutoff,0,
-	NULL
-};
-
-const X509V3_EXT_METHOD v3_crl_invdate = {
-	NID_invalidity_date, 0, ASN1_ITEM_ref(ASN1_GENERALIZEDTIME),
-	0,0,0,0,
-	0,0,
-	0,0,
-	i2r_ocsp_acutoff,0,
-	NULL
-};
-
-const X509V3_EXT_METHOD v3_crl_hold = {
-	NID_hold_instruction_code, 0, ASN1_ITEM_ref(ASN1_OBJECT),
-	0,0,0,0,
-	0,0,
-	0,0,
-	i2r_object,0,
-	NULL
-};
-
-const X509V3_EXT_METHOD v3_ocsp_nonce = {
-	NID_id_pkix_OCSP_Nonce, 0, NULL,
-	ocsp_nonce_new,
-	ocsp_nonce_free,
-	d2i_ocsp_nonce,
-	i2d_ocsp_nonce,
-	0,0,
-	0,0,
-	i2r_ocsp_nonce,0,
-	NULL
-};
-
-const X509V3_EXT_METHOD v3_ocsp_nocheck = {
-	NID_id_pkix_OCSP_noCheck, 0, ASN1_ITEM_ref(ASN1_NULL),
-	0,0,0,0,
-	0,s2i_ocsp_nocheck,
-	0,0,
-	i2r_ocsp_nocheck,0,
-	NULL
-};
-
-const X509V3_EXT_METHOD v3_ocsp_serviceloc = {
-	NID_id_pkix_OCSP_serviceLocator, 0, ASN1_ITEM_ref(OCSP_SERVICELOC),
-	0,0,0,0,
-	0,0,
-	0,0,
-	i2r_ocsp_serviceloc,0,
-	NULL
-};
-
-static int i2r_ocsp_crlid(X509V3_EXT_METHOD *method, void *in, BIO *bp, int ind)
-{
-	OCSP_CRLID *a = in;
-	if (a->crlUrl)
-	        {
-		if (!BIO_printf(bp, "%*scrlUrl: ", ind, "")) goto err;
-		if (!ASN1_STRING_print(bp, (ASN1_STRING*)a->crlUrl)) goto err;
-		if (!BIO_write(bp, "\n", 1)) goto err;
-		}
-	if (a->crlNum)
-	        {
-		if (!BIO_printf(bp, "%*scrlNum: ", ind, "")) goto err;
-		if (!i2a_ASN1_INTEGER(bp, a->crlNum)) goto err;
-		if (!BIO_write(bp, "\n", 1)) goto err;
-		}
-	if (a->crlTime)
-	        {
-		if (!BIO_printf(bp, "%*scrlTime: ", ind, "")) goto err;
-		if (!ASN1_GENERALIZEDTIME_print(bp, a->crlTime)) goto err;
-		if (!BIO_write(bp, "\n", 1)) goto err;
-		}
-	return 1;
-	err:
-	return 0;
-}
-
-static int i2r_ocsp_acutoff(X509V3_EXT_METHOD *method, void *cutoff, BIO *bp, int ind)
-{
-	if (!BIO_printf(bp, "%*s", ind, "")) return 0;
-	if(!ASN1_GENERALIZEDTIME_print(bp, cutoff)) return 0;
-	return 1;
-}
-
-
-static int i2r_object(X509V3_EXT_METHOD *method, void *oid, BIO *bp, int ind)
-{
-	if (!BIO_printf(bp, "%*s", ind, "")) return 0;
-	if(!i2a_ASN1_OBJECT(bp, oid)) return 0;
-	return 1;
-}
-
-/* OCSP nonce. This is needs special treatment because it doesn't have
- * an ASN1 encoding at all: it just contains arbitrary data.
- */
-
-static void *ocsp_nonce_new(void)
-{
-	return ASN1_OCTET_STRING_new();
-}
-
-static int i2d_ocsp_nonce(void *a, unsigned char **pp)
-{
-	ASN1_OCTET_STRING *os = a;
-	if(pp) {
-		memcpy(*pp, os->data, os->length);
-		*pp += os->length;
-	}
-	return os->length;
-}
-
-static void *d2i_ocsp_nonce(void *a, const unsigned char **pp, long length)
-{
-	ASN1_OCTET_STRING *os, **pos;
-	pos = a;
-	if(!pos || !*pos) os = ASN1_OCTET_STRING_new();
-	else os = *pos;
-	if(!ASN1_OCTET_STRING_set(os, *pp, length)) goto err;
-
-	*pp += length;
-
-	if(pos) *pos = os;
-	return os;
-
-	err:
-	if(os && (!pos || (*pos != os))) M_ASN1_OCTET_STRING_free(os);
-	OCSPerr(OCSP_F_D2I_OCSP_NONCE, ERR_R_MALLOC_FAILURE);
-	return NULL;
-}
-
-static void ocsp_nonce_free(void *a)
-{
-	M_ASN1_OCTET_STRING_free(a);
-}
-
-static int i2r_ocsp_nonce(X509V3_EXT_METHOD *method, void *nonce, BIO *out, int indent)
-{
-	if(BIO_printf(out, "%*s", indent, "") <= 0) return 0;
-	if(i2a_ASN1_STRING(out, nonce, V_ASN1_OCTET_STRING) <= 0) return 0;
-	return 1;
-}
-
-/* Nocheck is just a single NULL. Don't print anything and always set it */
-
-static int i2r_ocsp_nocheck(X509V3_EXT_METHOD *method, void *nocheck, BIO *out, int indent)
-{
-	return 1;
-}
-
-static void *s2i_ocsp_nocheck(X509V3_EXT_METHOD *method, X509V3_CTX *ctx, const char *str)
-{
-	return ASN1_NULL_new();
-}
-
-static int i2r_ocsp_serviceloc(X509V3_EXT_METHOD *method, void *in, BIO *bp, int ind)
-        {
-	int i;
-	OCSP_SERVICELOC *a = in;
-	ACCESS_DESCRIPTION *ad;
-
-        if (BIO_printf(bp, "%*sIssuer: ", ind, "") <= 0) goto err;
-        if (X509_NAME_print_ex(bp, a->issuer, 0, XN_FLAG_ONELINE) <= 0) goto err;
-	for (i = 0; i < sk_ACCESS_DESCRIPTION_num(a->locator); i++)
-	        {
-				ad = sk_ACCESS_DESCRIPTION_value(a->locator,i);
-				if (BIO_printf(bp, "\n%*s", (2*ind), "") <= 0) 
-					goto err;
-				if(i2a_ASN1_OBJECT(bp, ad->method) <= 0) goto err;
-				if(BIO_puts(bp, " - ") <= 0) goto err;
-				if(GENERAL_NAME_print(bp, ad->location) <= 0) goto err;
-		}
-	return 1;
-err:
-	return 0;
-	}
-#endif
diff --git a/crypto/openssl/crypto/x509v3/v3_pci.c b/crypto/openssl/crypto/x509v3/v3_pci.c
deleted file mode 100644
index 5158b1dfb333..000000000000
--- a/crypto/openssl/crypto/x509v3/v3_pci.c
+++ /dev/null
@@ -1,313 +0,0 @@
-/* v3_pci.c -*- mode:C; c-file-style: "eay" -*- */
-/* Contributed to the OpenSSL Project 2004
- * by Richard Levitte (richard@levitte.org)
- */
-/* Copyright (c) 2004 Kungliga Tekniska Högskolan
- * (Royal Institute of Technology, Stockholm, Sweden).
- * All rights reserved.
- *
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions
- * are met:
- *
- * 1. Redistributions of source code must retain the above copyright
- *    notice, this list of conditions and the following disclaimer.
- *
- * 2. Redistributions in binary form must reproduce the above copyright
- *    notice, this list of conditions and the following disclaimer in the
- *    documentation and/or other materials provided with the distribution.
- *
- * 3. Neither the name of the Institute nor the names of its contributors
- *    may be used to endorse or promote products derived from this software
- *    without specific prior written permission.
- *
- * THIS SOFTWARE IS PROVIDED BY THE INSTITUTE AND CONTRIBUTORS ``AS IS'' AND
- * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
- * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
- * ARE DISCLAIMED.  IN NO EVENT SHALL THE INSTITUTE OR CONTRIBUTORS BE LIABLE
- * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
- * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
- * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
- * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
- * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
- * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
- * SUCH DAMAGE.
- */
-
-#include <stdio.h>
-#include "cryptlib.h"
-#include <openssl/conf.h>
-#include <openssl/x509v3.h>
-
-static int i2r_pci(X509V3_EXT_METHOD *method, PROXY_CERT_INFO_EXTENSION *ext,
-	BIO *out, int indent);
-static PROXY_CERT_INFO_EXTENSION *r2i_pci(X509V3_EXT_METHOD *method,
-	X509V3_CTX *ctx, char *str);
-
-const X509V3_EXT_METHOD v3_pci =
-	{ NID_proxyCertInfo, 0, ASN1_ITEM_ref(PROXY_CERT_INFO_EXTENSION),
-	  0,0,0,0,
-	  0,0,
-	  NULL, NULL,
-	  (X509V3_EXT_I2R)i2r_pci,
-	  (X509V3_EXT_R2I)r2i_pci,
-	  NULL,
-	};
-
-static int i2r_pci(X509V3_EXT_METHOD *method, PROXY_CERT_INFO_EXTENSION *pci,
-	BIO *out, int indent)
-	{
-	BIO_printf(out, "%*sPath Length Constraint: ", indent, "");
-	if (pci->pcPathLengthConstraint)
-	  i2a_ASN1_INTEGER(out, pci->pcPathLengthConstraint);
-	else
-	  BIO_printf(out, "infinite");
-	BIO_puts(out, "\n");
-	BIO_printf(out, "%*sPolicy Language: ", indent, "");
-	i2a_ASN1_OBJECT(out, pci->proxyPolicy->policyLanguage);
-	BIO_puts(out, "\n");
-	if (pci->proxyPolicy->policy && pci->proxyPolicy->policy->data)
-	  BIO_printf(out, "%*sPolicy Text: %s\n", indent, "",
-		     pci->proxyPolicy->policy->data);
-	return 1;
-	}
-
-static int process_pci_value(CONF_VALUE *val,
-	ASN1_OBJECT **language, ASN1_INTEGER **pathlen,
-	ASN1_OCTET_STRING **policy)
-	{
-	int free_policy = 0;
-
-	if (strcmp(val->name, "language") == 0)
-		{
-		if (*language)
-			{
-			X509V3err(X509V3_F_PROCESS_PCI_VALUE,X509V3_R_POLICY_LANGUAGE_ALREADTY_DEFINED);
-			X509V3_conf_err(val);
-			return 0;
-			}
-		if (!(*language = OBJ_txt2obj(val->value, 0)))
-			{
-			X509V3err(X509V3_F_PROCESS_PCI_VALUE,X509V3_R_INVALID_OBJECT_IDENTIFIER);
-			X509V3_conf_err(val);
-			return 0;
-			}
-		}
-	else if (strcmp(val->name, "pathlen") == 0)
-		{
-		if (*pathlen)
-			{
-			X509V3err(X509V3_F_PROCESS_PCI_VALUE,X509V3_R_POLICY_PATH_LENGTH_ALREADTY_DEFINED);
-			X509V3_conf_err(val);
-			return 0;
-			}
-		if (!X509V3_get_value_int(val, pathlen))
-			{
-			X509V3err(X509V3_F_PROCESS_PCI_VALUE,X509V3_R_POLICY_PATH_LENGTH);
-			X509V3_conf_err(val);
-			return 0;
-			}
-		}
-	else if (strcmp(val->name, "policy") == 0)
-		{
-		unsigned char *tmp_data = NULL;
-		long val_len;
-		if (!*policy)
-			{
-			*policy = ASN1_OCTET_STRING_new();
-			if (!*policy)
-				{
-				X509V3err(X509V3_F_PROCESS_PCI_VALUE,ERR_R_MALLOC_FAILURE);
-				X509V3_conf_err(val);
-				return 0;
-				}
-			free_policy = 1;
-			}
-		if (strncmp(val->value, "hex:", 4) == 0)
-			{
-			unsigned char *tmp_data2 =
-				string_to_hex(val->value + 4, &val_len);
-
-			if (!tmp_data2) goto err;
-
-			tmp_data = OPENSSL_realloc((*policy)->data,
-				(*policy)->length + val_len + 1);
-			if (tmp_data)
-				{
-				(*policy)->data = tmp_data;
-				memcpy(&(*policy)->data[(*policy)->length],
-					tmp_data2, val_len);
-				(*policy)->length += val_len;
-				(*policy)->data[(*policy)->length] = '\0';
-				}
-			}
-		else if (strncmp(val->value, "file:", 5) == 0)
-			{
-			unsigned char buf[2048];
-			int n;
-			BIO *b = BIO_new_file(val->value + 5, "r");
-			if (!b)
-				{
-				X509V3err(X509V3_F_PROCESS_PCI_VALUE,ERR_R_BIO_LIB);
-				X509V3_conf_err(val);
-				goto err;
-				}
-			while((n = BIO_read(b, buf, sizeof(buf))) > 0
-				|| (n == 0 && BIO_should_retry(b)))
-				{
-				if (!n) continue;
-
-				tmp_data = OPENSSL_realloc((*policy)->data,
-					(*policy)->length + n + 1);
-
-				if (!tmp_data)
-					break;
-
-				(*policy)->data = tmp_data;
-				memcpy(&(*policy)->data[(*policy)->length],
-					buf, n);
-				(*policy)->length += n;
-				(*policy)->data[(*policy)->length] = '\0';
-				}
-
-			if (n < 0)
-				{
-				X509V3err(X509V3_F_PROCESS_PCI_VALUE,ERR_R_BIO_LIB);
-				X509V3_conf_err(val);
-				goto err;
-				}
-			}
-		else if (strncmp(val->value, "text:", 5) == 0)
-			{
-			val_len = strlen(val->value + 5);
-			tmp_data = OPENSSL_realloc((*policy)->data,
-				(*policy)->length + val_len + 1);
-			if (tmp_data)
-				{
-				(*policy)->data = tmp_data;
-				memcpy(&(*policy)->data[(*policy)->length],
-					val->value + 5, val_len);
-				(*policy)->length += val_len;
-				(*policy)->data[(*policy)->length] = '\0';
-				}
-			}
-		else
-			{
-			X509V3err(X509V3_F_PROCESS_PCI_VALUE,X509V3_R_INCORRECT_POLICY_SYNTAX_TAG);
-			X509V3_conf_err(val);
-			goto err;
-			}
-		if (!tmp_data)
-			{
-			X509V3err(X509V3_F_PROCESS_PCI_VALUE,ERR_R_MALLOC_FAILURE);
-			X509V3_conf_err(val);
-			goto err;
-			}
-		}
-	return 1;
-err:
-	if (free_policy)
-		{
-		ASN1_OCTET_STRING_free(*policy);
-		*policy = NULL;
-		}
-	return 0;
-	}
-
-static PROXY_CERT_INFO_EXTENSION *r2i_pci(X509V3_EXT_METHOD *method,
-	X509V3_CTX *ctx, char *value)
-	{
-	PROXY_CERT_INFO_EXTENSION *pci = NULL;
-	STACK_OF(CONF_VALUE) *vals;
-	ASN1_OBJECT *language = NULL;
-	ASN1_INTEGER *pathlen = NULL;
-	ASN1_OCTET_STRING *policy = NULL;
-	int i, j;
-
-	vals = X509V3_parse_list(value);
-	for (i = 0; i < sk_CONF_VALUE_num(vals); i++)
-		{
-		CONF_VALUE *cnf = sk_CONF_VALUE_value(vals, i);
-		if (!cnf->name || (*cnf->name != '@' && !cnf->value))
-			{
-			X509V3err(X509V3_F_R2I_PCI,X509V3_R_INVALID_PROXY_POLICY_SETTING);
-			X509V3_conf_err(cnf);
-			goto err;
-			}
-		if (*cnf->name == '@')
-			{
-			STACK_OF(CONF_VALUE) *sect;
-			int success_p = 1;
-
-			sect = X509V3_get_section(ctx, cnf->name + 1);
-			if (!sect)
-				{
-				X509V3err(X509V3_F_R2I_PCI,X509V3_R_INVALID_SECTION);
-				X509V3_conf_err(cnf);
-				goto err;
-				}
-			for (j = 0; success_p && j < sk_CONF_VALUE_num(sect); j++)
-				{
-				success_p =
-					process_pci_value(sk_CONF_VALUE_value(sect, j),
-						&language, &pathlen, &policy);
-				}
-			X509V3_section_free(ctx, sect);
-			if (!success_p)
-				goto err;
-			}
-		else
-			{
-			if (!process_pci_value(cnf,
-					&language, &pathlen, &policy))
-				{
-				X509V3_conf_err(cnf);
-				goto err;
-				}
-			}
-		}
-
-	/* Language is mandatory */
-	if (!language)
-		{
-		X509V3err(X509V3_F_R2I_PCI,X509V3_R_NO_PROXY_CERT_POLICY_LANGUAGE_DEFINED);
-		goto err;
-		}
-	i = OBJ_obj2nid(language);
-	if ((i == NID_Independent || i == NID_id_ppl_inheritAll) && policy)
-		{
-		X509V3err(X509V3_F_R2I_PCI,X509V3_R_POLICY_WHEN_PROXY_LANGUAGE_REQUIRES_NO_POLICY);
-		goto err;
-		}
-
-	pci = PROXY_CERT_INFO_EXTENSION_new();
-	if (!pci)
-		{
-		X509V3err(X509V3_F_R2I_PCI,ERR_R_MALLOC_FAILURE);
-		goto err;
-		}
-	pci->proxyPolicy = PROXY_POLICY_new();
-	if (!pci->proxyPolicy)
-		{
-		X509V3err(X509V3_F_R2I_PCI,ERR_R_MALLOC_FAILURE);
-		goto err;
-		}
-
-	pci->proxyPolicy->policyLanguage = language; language = NULL;
-	pci->proxyPolicy->policy = policy; policy = NULL;
-	pci->pcPathLengthConstraint = pathlen; pathlen = NULL;
-	goto end;
-err:
-	if (language) { ASN1_OBJECT_free(language); language = NULL; }
-	if (pathlen) { ASN1_INTEGER_free(pathlen); pathlen = NULL; }
-	if (policy) { ASN1_OCTET_STRING_free(policy); policy = NULL; }
-	if (pci && pci->proxyPolicy)
-		{
-		PROXY_POLICY_free(pci->proxyPolicy);
-		pci->proxyPolicy = NULL;
-		}
-	if (pci) { PROXY_CERT_INFO_EXTENSION_free(pci); pci = NULL; }
-end:
-	sk_CONF_VALUE_pop_free(vals, X509V3_conf_free);
-	return pci;
-	}
diff --git a/crypto/openssl/crypto/x509v3/v3_pcia.c b/crypto/openssl/crypto/x509v3/v3_pcia.c
deleted file mode 100644
index bb362e0e5a9d..000000000000
--- a/crypto/openssl/crypto/x509v3/v3_pcia.c
+++ /dev/null
@@ -1,55 +0,0 @@
-/* v3_pcia.c -*- mode:C; c-file-style: "eay" -*- */
-/* Contributed to the OpenSSL Project 2004
- * by Richard Levitte (richard@levitte.org)
- */
-/* Copyright (c) 2004 Kungliga Tekniska Högskolan
- * (Royal Institute of Technology, Stockholm, Sweden).
- * All rights reserved.
- *
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions
- * are met:
- *
- * 1. Redistributions of source code must retain the above copyright
- *    notice, this list of conditions and the following disclaimer.
- *
- * 2. Redistributions in binary form must reproduce the above copyright
- *    notice, this list of conditions and the following disclaimer in the
- *    documentation and/or other materials provided with the distribution.
- *
- * 3. Neither the name of the Institute nor the names of its contributors
- *    may be used to endorse or promote products derived from this software
- *    without specific prior written permission.
- *
- * THIS SOFTWARE IS PROVIDED BY THE INSTITUTE AND CONTRIBUTORS ``AS IS'' AND
- * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
- * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
- * ARE DISCLAIMED.  IN NO EVENT SHALL THE INSTITUTE OR CONTRIBUTORS BE LIABLE
- * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
- * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
- * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
- * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
- * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
- * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
- * SUCH DAMAGE.
- */
-
-#include <openssl/asn1.h>
-#include <openssl/asn1t.h>
-#include <openssl/x509v3.h>
-
-ASN1_SEQUENCE(PROXY_POLICY) =
-	{
-	ASN1_SIMPLE(PROXY_POLICY,policyLanguage,ASN1_OBJECT),
-	ASN1_OPT(PROXY_POLICY,policy,ASN1_OCTET_STRING)
-} ASN1_SEQUENCE_END(PROXY_POLICY)
-
-IMPLEMENT_ASN1_FUNCTIONS(PROXY_POLICY)
-
-ASN1_SEQUENCE(PROXY_CERT_INFO_EXTENSION) =
-	{
-	ASN1_OPT(PROXY_CERT_INFO_EXTENSION,pcPathLengthConstraint,ASN1_INTEGER),
-	ASN1_SIMPLE(PROXY_CERT_INFO_EXTENSION,proxyPolicy,PROXY_POLICY)
-} ASN1_SEQUENCE_END(PROXY_CERT_INFO_EXTENSION)
-
-IMPLEMENT_ASN1_FUNCTIONS(PROXY_CERT_INFO_EXTENSION)
diff --git a/crypto/openssl/crypto/x509v3/v3_pcons.c b/crypto/openssl/crypto/x509v3/v3_pcons.c
deleted file mode 100644
index 13248c2adaf4..000000000000
--- a/crypto/openssl/crypto/x509v3/v3_pcons.c
+++ /dev/null
@@ -1,136 +0,0 @@
-/* v3_pcons.c */
-/* Written by Dr Stephen N Henson (shenson@bigfoot.com) for the OpenSSL
- * project.
- */
-/* ====================================================================
- * Copyright (c) 2003 The OpenSSL Project.  All rights reserved.
- *
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions
- * are met:
- *
- * 1. Redistributions of source code must retain the above copyright
- *    notice, this list of conditions and the following disclaimer. 
- *
- * 2. Redistributions in binary form must reproduce the above copyright
- *    notice, this list of conditions and the following disclaimer in
- *    the documentation and/or other materials provided with the
- *    distribution.
- *
- * 3. All advertising materials mentioning features or use of this
- *    software must display the following acknowledgment:
- *    "This product includes software developed by the OpenSSL Project
- *    for use in the OpenSSL Toolkit. (http://www.OpenSSL.org/)"
- *
- * 4. The names "OpenSSL Toolkit" and "OpenSSL Project" must not be used to
- *    endorse or promote products derived from this software without
- *    prior written permission. For written permission, please contact
- *    licensing@OpenSSL.org.
- *
- * 5. Products derived from this software may not be called "OpenSSL"
- *    nor may "OpenSSL" appear in their names without prior written
- *    permission of the OpenSSL Project.
- *
- * 6. Redistributions of any form whatsoever must retain the following
- *    acknowledgment:
- *    "This product includes software developed by the OpenSSL Project
- *    for use in the OpenSSL Toolkit (http://www.OpenSSL.org/)"
- *
- * THIS SOFTWARE IS PROVIDED BY THE OpenSSL PROJECT ``AS IS'' AND ANY
- * EXPRESSED OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
- * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR
- * PURPOSE ARE DISCLAIMED.  IN NO EVENT SHALL THE OpenSSL PROJECT OR
- * ITS CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
- * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
- * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
- * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
- * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
- * STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
- * ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED
- * OF THE POSSIBILITY OF SUCH DAMAGE.
- * ====================================================================
- *
- * This product includes cryptographic software written by Eric Young
- * (eay@cryptsoft.com).  This product includes software written by Tim
- * Hudson (tjh@cryptsoft.com).
- *
- */
-
-
-#include <stdio.h>
-#include "cryptlib.h"
-#include <openssl/asn1.h>
-#include <openssl/asn1t.h>
-#include <openssl/conf.h>
-#include <openssl/x509v3.h>
-
-static STACK_OF(CONF_VALUE) *i2v_POLICY_CONSTRAINTS(X509V3_EXT_METHOD *method,
-				void *bcons, STACK_OF(CONF_VALUE) *extlist);
-static void *v2i_POLICY_CONSTRAINTS(X509V3_EXT_METHOD *method,
-				X509V3_CTX *ctx, STACK_OF(CONF_VALUE) *values);
-
-const X509V3_EXT_METHOD v3_policy_constraints = {
-NID_policy_constraints, 0,
-ASN1_ITEM_ref(POLICY_CONSTRAINTS),
-0,0,0,0,
-0,0,
-i2v_POLICY_CONSTRAINTS,
-v2i_POLICY_CONSTRAINTS,
-NULL,NULL,
-NULL
-};
-
-ASN1_SEQUENCE(POLICY_CONSTRAINTS) = {
-	ASN1_IMP_OPT(POLICY_CONSTRAINTS, requireExplicitPolicy, ASN1_INTEGER,0),
-	ASN1_IMP_OPT(POLICY_CONSTRAINTS, inhibitPolicyMapping, ASN1_INTEGER,1)
-} ASN1_SEQUENCE_END(POLICY_CONSTRAINTS)
-
-IMPLEMENT_ASN1_ALLOC_FUNCTIONS(POLICY_CONSTRAINTS)
-
-
-static STACK_OF(CONF_VALUE) *i2v_POLICY_CONSTRAINTS(X509V3_EXT_METHOD *method,
-	     void *a, STACK_OF(CONF_VALUE) *extlist)
-{
-	POLICY_CONSTRAINTS *pcons = a;
-	X509V3_add_value_int("Require Explicit Policy",
-			pcons->requireExplicitPolicy, &extlist);
-	X509V3_add_value_int("Inhibit Policy Mapping",
-			pcons->inhibitPolicyMapping, &extlist);
-	return extlist;
-}
-
-static void *v2i_POLICY_CONSTRAINTS(X509V3_EXT_METHOD *method,
-	     X509V3_CTX *ctx, STACK_OF(CONF_VALUE) *values)
-{
-	POLICY_CONSTRAINTS *pcons=NULL;
-	CONF_VALUE *val;
-	int i;
-	if(!(pcons = POLICY_CONSTRAINTS_new())) {
-		X509V3err(X509V3_F_V2I_POLICY_CONSTRAINTS, ERR_R_MALLOC_FAILURE);
-		return NULL;
-	}
-	for(i = 0; i < sk_CONF_VALUE_num(values); i++) {
-		val = sk_CONF_VALUE_value(values, i);
-		if(!strcmp(val->name, "requireExplicitPolicy")) {
-			if(!X509V3_get_value_int(val,
-				&pcons->requireExplicitPolicy)) goto err;
-		} else if(!strcmp(val->name, "inhibitPolicyMapping")) {
-			if(!X509V3_get_value_int(val,
-				&pcons->inhibitPolicyMapping)) goto err;
-		} else {
-			X509V3err(X509V3_F_V2I_POLICY_CONSTRAINTS, X509V3_R_INVALID_NAME);
-			X509V3_conf_err(val);
-			goto err;
-		}
-	}
-	if (!pcons->inhibitPolicyMapping && !pcons->requireExplicitPolicy) {
-		X509V3err(X509V3_F_V2I_POLICY_CONSTRAINTS, X509V3_R_ILLEGAL_EMPTY_EXTENSION);
-		goto err;
-	}
-
-	return pcons;
-	err:
-	POLICY_CONSTRAINTS_free(pcons);
-	return NULL;
-}
-
diff --git a/crypto/openssl/crypto/x509v3/v3_pku.c b/crypto/openssl/crypto/x509v3/v3_pku.c
deleted file mode 100644
index 5c4626e89b5b..000000000000
--- a/crypto/openssl/crypto/x509v3/v3_pku.c
+++ /dev/null
@@ -1,108 +0,0 @@
-/* v3_pku.c */
-/* Written by Dr Stephen N Henson (shenson@bigfoot.com) for the OpenSSL
- * project 1999.
- */
-/* ====================================================================
- * Copyright (c) 1999 The OpenSSL Project.  All rights reserved.
- *
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions
- * are met:
- *
- * 1. Redistributions of source code must retain the above copyright
- *    notice, this list of conditions and the following disclaimer. 
- *
- * 2. Redistributions in binary form must reproduce the above copyright
- *    notice, this list of conditions and the following disclaimer in
- *    the documentation and/or other materials provided with the
- *    distribution.
- *
- * 3. All advertising materials mentioning features or use of this
- *    software must display the following acknowledgment:
- *    "This product includes software developed by the OpenSSL Project
- *    for use in the OpenSSL Toolkit. (http://www.OpenSSL.org/)"
- *
- * 4. The names "OpenSSL Toolkit" and "OpenSSL Project" must not be used to
- *    endorse or promote products derived from this software without
- *    prior written permission. For written permission, please contact
- *    licensing@OpenSSL.org.
- *
- * 5. Products derived from this software may not be called "OpenSSL"
- *    nor may "OpenSSL" appear in their names without prior written
- *    permission of the OpenSSL Project.
- *
- * 6. Redistributions of any form whatsoever must retain the following
- *    acknowledgment:
- *    "This product includes software developed by the OpenSSL Project
- *    for use in the OpenSSL Toolkit (http://www.OpenSSL.org/)"
- *
- * THIS SOFTWARE IS PROVIDED BY THE OpenSSL PROJECT ``AS IS'' AND ANY
- * EXPRESSED OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
- * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR
- * PURPOSE ARE DISCLAIMED.  IN NO EVENT SHALL THE OpenSSL PROJECT OR
- * ITS CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
- * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
- * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
- * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
- * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
- * STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
- * ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED
- * OF THE POSSIBILITY OF SUCH DAMAGE.
- * ====================================================================
- *
- * This product includes cryptographic software written by Eric Young
- * (eay@cryptsoft.com).  This product includes software written by Tim
- * Hudson (tjh@cryptsoft.com).
- *
- */
-
-#include <stdio.h>
-#include "cryptlib.h"
-#include <openssl/asn1.h>
-#include <openssl/asn1t.h>
-#include <openssl/x509v3.h>
-
-static int i2r_PKEY_USAGE_PERIOD(X509V3_EXT_METHOD *method, PKEY_USAGE_PERIOD *usage, BIO *out, int indent);
-/*
-static PKEY_USAGE_PERIOD *v2i_PKEY_USAGE_PERIOD(X509V3_EXT_METHOD *method, X509V3_CTX *ctx, STACK_OF(CONF_VALUE) *values);
-*/
-const X509V3_EXT_METHOD v3_pkey_usage_period = {
-NID_private_key_usage_period, 0, ASN1_ITEM_ref(PKEY_USAGE_PERIOD),
-0,0,0,0,
-0,0,0,0,
-(X509V3_EXT_I2R)i2r_PKEY_USAGE_PERIOD, NULL,
-NULL
-};
-
-ASN1_SEQUENCE(PKEY_USAGE_PERIOD) = {
-	ASN1_IMP_OPT(PKEY_USAGE_PERIOD, notBefore, ASN1_GENERALIZEDTIME, 0),
-	ASN1_IMP_OPT(PKEY_USAGE_PERIOD, notAfter, ASN1_GENERALIZEDTIME, 1)
-} ASN1_SEQUENCE_END(PKEY_USAGE_PERIOD)
-
-IMPLEMENT_ASN1_FUNCTIONS(PKEY_USAGE_PERIOD)
-
-static int i2r_PKEY_USAGE_PERIOD(X509V3_EXT_METHOD *method,
-	     PKEY_USAGE_PERIOD *usage, BIO *out, int indent)
-{
-	BIO_printf(out, "%*s", indent, "");
-	if(usage->notBefore) {
-		BIO_write(out, "Not Before: ", 12);
-		ASN1_GENERALIZEDTIME_print(out, usage->notBefore);
-		if(usage->notAfter) BIO_write(out, ", ", 2);
-	}
-	if(usage->notAfter) {
-		BIO_write(out, "Not After: ", 11);
-		ASN1_GENERALIZEDTIME_print(out, usage->notAfter);
-	}
-	return 1;
-}
-
-/*
-static PKEY_USAGE_PERIOD *v2i_PKEY_USAGE_PERIOD(method, ctx, values)
-X509V3_EXT_METHOD *method;
-X509V3_CTX *ctx;
-STACK_OF(CONF_VALUE) *values;
-{
-return NULL;
-}
-*/
diff --git a/crypto/openssl/crypto/x509v3/v3_pmaps.c b/crypto/openssl/crypto/x509v3/v3_pmaps.c
deleted file mode 100644
index 626303264f71..000000000000
--- a/crypto/openssl/crypto/x509v3/v3_pmaps.c
+++ /dev/null
@@ -1,153 +0,0 @@
-/* v3_pmaps.c */
-/* Written by Dr Stephen N Henson (shenson@bigfoot.com) for the OpenSSL
- * project.
- */
-/* ====================================================================
- * Copyright (c) 2003 The OpenSSL Project.  All rights reserved.
- *
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions
- * are met:
- *
- * 1. Redistributions of source code must retain the above copyright
- *    notice, this list of conditions and the following disclaimer. 
- *
- * 2. Redistributions in binary form must reproduce the above copyright
- *    notice, this list of conditions and the following disclaimer in
- *    the documentation and/or other materials provided with the
- *    distribution.
- *
- * 3. All advertising materials mentioning features or use of this
- *    software must display the following acknowledgment:
- *    "This product includes software developed by the OpenSSL Project
- *    for use in the OpenSSL Toolkit. (http://www.OpenSSL.org/)"
- *
- * 4. The names "OpenSSL Toolkit" and "OpenSSL Project" must not be used to
- *    endorse or promote products derived from this software without
- *    prior written permission. For written permission, please contact
- *    licensing@OpenSSL.org.
- *
- * 5. Products derived from this software may not be called "OpenSSL"
- *    nor may "OpenSSL" appear in their names without prior written
- *    permission of the OpenSSL Project.
- *
- * 6. Redistributions of any form whatsoever must retain the following
- *    acknowledgment:
- *    "This product includes software developed by the OpenSSL Project
- *    for use in the OpenSSL Toolkit (http://www.OpenSSL.org/)"
- *
- * THIS SOFTWARE IS PROVIDED BY THE OpenSSL PROJECT ``AS IS'' AND ANY
- * EXPRESSED OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
- * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR
- * PURPOSE ARE DISCLAIMED.  IN NO EVENT SHALL THE OpenSSL PROJECT OR
- * ITS CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
- * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
- * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
- * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
- * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
- * STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
- * ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED
- * OF THE POSSIBILITY OF SUCH DAMAGE.
- * ====================================================================
- *
- * This product includes cryptographic software written by Eric Young
- * (eay@cryptsoft.com).  This product includes software written by Tim
- * Hudson (tjh@cryptsoft.com).
- *
- */
-
-
-#include <stdio.h>
-#include "cryptlib.h"
-#include <openssl/asn1t.h>
-#include <openssl/conf.h>
-#include <openssl/x509v3.h>
-
-static void *v2i_POLICY_MAPPINGS(X509V3_EXT_METHOD *method,
-				X509V3_CTX *ctx, STACK_OF(CONF_VALUE) *nval);
-static STACK_OF(CONF_VALUE) *i2v_POLICY_MAPPINGS(X509V3_EXT_METHOD *method,
-				void *pmps, STACK_OF(CONF_VALUE) *extlist);
-
-const X509V3_EXT_METHOD v3_policy_mappings = {
-	NID_policy_mappings, 0,
-	ASN1_ITEM_ref(POLICY_MAPPINGS),
-	0,0,0,0,
-	0,0,
-	i2v_POLICY_MAPPINGS,
-	v2i_POLICY_MAPPINGS,
-	0,0,
-	NULL
-};
-
-ASN1_SEQUENCE(POLICY_MAPPING) = {
-	ASN1_SIMPLE(POLICY_MAPPING, issuerDomainPolicy, ASN1_OBJECT),
-	ASN1_SIMPLE(POLICY_MAPPING, subjectDomainPolicy, ASN1_OBJECT)
-} ASN1_SEQUENCE_END(POLICY_MAPPING)
-
-ASN1_ITEM_TEMPLATE(POLICY_MAPPINGS) = 
-	ASN1_EX_TEMPLATE_TYPE(ASN1_TFLG_SEQUENCE_OF, 0, POLICY_MAPPINGS,
-								POLICY_MAPPING)
-ASN1_ITEM_TEMPLATE_END(POLICY_MAPPINGS)
-
-IMPLEMENT_ASN1_ALLOC_FUNCTIONS(POLICY_MAPPING)
-
-
-static STACK_OF(CONF_VALUE) *i2v_POLICY_MAPPINGS(X509V3_EXT_METHOD *method,
-		void *a, STACK_OF(CONF_VALUE) *ext_list)
-{
-	POLICY_MAPPINGS *pmaps = a;
-	POLICY_MAPPING *pmap;
-	int i;
-	char obj_tmp1[80];
-	char obj_tmp2[80];
-	for(i = 0; i < sk_POLICY_MAPPING_num(pmaps); i++) {
-		pmap = sk_POLICY_MAPPING_value(pmaps, i);
-		i2t_ASN1_OBJECT(obj_tmp1, 80, pmap->issuerDomainPolicy);
-		i2t_ASN1_OBJECT(obj_tmp2, 80, pmap->subjectDomainPolicy);
-		X509V3_add_value(obj_tmp1, obj_tmp2, &ext_list);
-	}
-	return ext_list;
-}
-
-static void *v2i_POLICY_MAPPINGS(X509V3_EXT_METHOD *method,
-				X509V3_CTX *ctx, STACK_OF(CONF_VALUE) *nval)
-{
-	POLICY_MAPPINGS *pmaps;
-	POLICY_MAPPING *pmap;
-	ASN1_OBJECT *obj1, *obj2;
-	CONF_VALUE *val;
-	int i;
-
-	if(!(pmaps = sk_POLICY_MAPPING_new_null())) {
-		X509V3err(X509V3_F_V2I_POLICY_MAPPINGS,ERR_R_MALLOC_FAILURE);
-		return NULL;
-	}
-
-	for(i = 0; i < sk_CONF_VALUE_num(nval); i++) {
-		val = sk_CONF_VALUE_value(nval, i);
-		if(!val->value || !val->name) {
-			sk_POLICY_MAPPING_pop_free(pmaps, POLICY_MAPPING_free);
-			X509V3err(X509V3_F_V2I_POLICY_MAPPINGS,X509V3_R_INVALID_OBJECT_IDENTIFIER);
-			X509V3_conf_err(val);
-			return NULL;
-		}
-		obj1 = OBJ_txt2obj(val->name, 0);
-		obj2 = OBJ_txt2obj(val->value, 0);
-		if(!obj1 || !obj2) {
-			sk_POLICY_MAPPING_pop_free(pmaps, POLICY_MAPPING_free);
-			X509V3err(X509V3_F_V2I_POLICY_MAPPINGS,X509V3_R_INVALID_OBJECT_IDENTIFIER);
-			X509V3_conf_err(val);
-			return NULL;
-		}
-		pmap = POLICY_MAPPING_new();
-		if (!pmap) {
-			sk_POLICY_MAPPING_pop_free(pmaps, POLICY_MAPPING_free);
-			X509V3err(X509V3_F_V2I_POLICY_MAPPINGS,ERR_R_MALLOC_FAILURE);
-			return NULL;
-		}
-		pmap->issuerDomainPolicy = obj1;
-		pmap->subjectDomainPolicy = obj2;
-		sk_POLICY_MAPPING_push(pmaps, pmap);
-	}
-	return pmaps;
-}
diff --git a/crypto/openssl/crypto/x509v3/v3_prn.c b/crypto/openssl/crypto/x509v3/v3_prn.c
deleted file mode 100644
index 20bd9bda190a..000000000000
--- a/crypto/openssl/crypto/x509v3/v3_prn.c
+++ /dev/null
@@ -1,234 +0,0 @@
-/* v3_prn.c */
-/* Written by Dr Stephen N Henson (shenson@bigfoot.com) for the OpenSSL
- * project 1999.
- */
-/* ====================================================================
- * Copyright (c) 1999 The OpenSSL Project.  All rights reserved.
- *
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions
- * are met:
- *
- * 1. Redistributions of source code must retain the above copyright
- *    notice, this list of conditions and the following disclaimer. 
- *
- * 2. Redistributions in binary form must reproduce the above copyright
- *    notice, this list of conditions and the following disclaimer in
- *    the documentation and/or other materials provided with the
- *    distribution.
- *
- * 3. All advertising materials mentioning features or use of this
- *    software must display the following acknowledgment:
- *    "This product includes software developed by the OpenSSL Project
- *    for use in the OpenSSL Toolkit. (http://www.OpenSSL.org/)"
- *
- * 4. The names "OpenSSL Toolkit" and "OpenSSL Project" must not be used to
- *    endorse or promote products derived from this software without
- *    prior written permission. For written permission, please contact
- *    licensing@OpenSSL.org.
- *
- * 5. Products derived from this software may not be called "OpenSSL"
- *    nor may "OpenSSL" appear in their names without prior written
- *    permission of the OpenSSL Project.
- *
- * 6. Redistributions of any form whatsoever must retain the following
- *    acknowledgment:
- *    "This product includes software developed by the OpenSSL Project
- *    for use in the OpenSSL Toolkit (http://www.OpenSSL.org/)"
- *
- * THIS SOFTWARE IS PROVIDED BY THE OpenSSL PROJECT ``AS IS'' AND ANY
- * EXPRESSED OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
- * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR
- * PURPOSE ARE DISCLAIMED.  IN NO EVENT SHALL THE OpenSSL PROJECT OR
- * ITS CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
- * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
- * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
- * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
- * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
- * STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
- * ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED
- * OF THE POSSIBILITY OF SUCH DAMAGE.
- * ====================================================================
- *
- * This product includes cryptographic software written by Eric Young
- * (eay@cryptsoft.com).  This product includes software written by Tim
- * Hudson (tjh@cryptsoft.com).
- *
- */
-/* X509 v3 extension utilities */
-
-#include <stdio.h>
-#include "cryptlib.h"
-#include <openssl/conf.h>
-#include <openssl/x509v3.h>
-
-/* Extension printing routines */
-
-static int unknown_ext_print(BIO *out, X509_EXTENSION *ext, unsigned long flag, int indent, int supported);
-
-/* Print out a name+value stack */
-
-void X509V3_EXT_val_prn(BIO *out, STACK_OF(CONF_VALUE) *val, int indent, int ml)
-{
-	int i;
-	CONF_VALUE *nval;
-	if(!val) return;
-	if(!ml || !sk_CONF_VALUE_num(val)) {
-		BIO_printf(out, "%*s", indent, "");
-		if(!sk_CONF_VALUE_num(val)) BIO_puts(out, "<EMPTY>\n");
-	}
-	for(i = 0; i < sk_CONF_VALUE_num(val); i++) {
-		if(ml) BIO_printf(out, "%*s", indent, "");
-		else if(i > 0) BIO_printf(out, ", ");
-		nval = sk_CONF_VALUE_value(val, i);
-		if(!nval->name) BIO_puts(out, nval->value);
-		else if(!nval->value) BIO_puts(out, nval->name);
-#ifndef CHARSET_EBCDIC
-		else BIO_printf(out, "%s:%s", nval->name, nval->value);
-#else
-		else {
-			int len;
-			char *tmp;
-			len = strlen(nval->value)+1;
-			tmp = OPENSSL_malloc(len);
-			if (tmp)
-			{
-				ascii2ebcdic(tmp, nval->value, len);
-				BIO_printf(out, "%s:%s", nval->name, tmp);
-				OPENSSL_free(tmp);
-			}
-		}
-#endif
-		if(ml) BIO_puts(out, "\n");
-	}
-}
-
-/* Main routine: print out a general extension */
-
-int X509V3_EXT_print(BIO *out, X509_EXTENSION *ext, unsigned long flag, int indent)
-{
-	void *ext_str = NULL;
-	char *value = NULL;
-	const unsigned char *p;
-	X509V3_EXT_METHOD *method;	
-	STACK_OF(CONF_VALUE) *nval = NULL;
-	int ok = 1;
-
-	if(!(method = X509V3_EXT_get(ext)))
-		return unknown_ext_print(out, ext, flag, indent, 0);
-	p = ext->value->data;
-	if(method->it) ext_str = ASN1_item_d2i(NULL, &p, ext->value->length, ASN1_ITEM_ptr(method->it));
-	else ext_str = method->d2i(NULL, &p, ext->value->length);
-
-	if(!ext_str) return unknown_ext_print(out, ext, flag, indent, 1);
-
-	if(method->i2s) {
-		if(!(value = method->i2s(method, ext_str))) {
-			ok = 0;
-			goto err;
-		}
-#ifndef CHARSET_EBCDIC
-		BIO_printf(out, "%*s%s", indent, "", value);
-#else
-		{
-			int len;
-			char *tmp;
-			len = strlen(value)+1;
-			tmp = OPENSSL_malloc(len);
-			if (tmp)
-			{
-				ascii2ebcdic(tmp, value, len);
-				BIO_printf(out, "%*s%s", indent, "", tmp);
-				OPENSSL_free(tmp);
-			}
-		}
-#endif
-	} else if(method->i2v) {
-		if(!(nval = method->i2v(method, ext_str, NULL))) {
-			ok = 0;
-			goto err;
-		}
-		X509V3_EXT_val_prn(out, nval, indent,
-				 method->ext_flags & X509V3_EXT_MULTILINE);
-	} else if(method->i2r) {
-		if(!method->i2r(method, ext_str, out, indent)) ok = 0;
-	} else ok = 0;
-
-	err:
-		sk_CONF_VALUE_pop_free(nval, X509V3_conf_free);
-		if(value) OPENSSL_free(value);
-		if(method->it) ASN1_item_free(ext_str, ASN1_ITEM_ptr(method->it));
-		else method->ext_free(ext_str);
-		return ok;
-}
-
-int X509V3_extensions_print(BIO *bp, char *title, STACK_OF(X509_EXTENSION) *exts, unsigned long flag, int indent)
-{
-	int i, j;
-
-	if(sk_X509_EXTENSION_num(exts) <= 0) return 1;
-
-	if(title) 
-		{
-		BIO_printf(bp,"%*s%s:\n",indent, "", title);
-		indent += 4;
-		}
-
-	for (i=0; i<sk_X509_EXTENSION_num(exts); i++)
-		{
-		ASN1_OBJECT *obj;
-		X509_EXTENSION *ex;
-		ex=sk_X509_EXTENSION_value(exts, i);
-		if (indent && BIO_printf(bp,"%*s",indent, "") <= 0) return 0;
-		obj=X509_EXTENSION_get_object(ex);
-		i2a_ASN1_OBJECT(bp,obj);
-		j=X509_EXTENSION_get_critical(ex);
-		if (BIO_printf(bp,": %s\n",j?"critical":"") <= 0)
-			return 0;
-		if(!X509V3_EXT_print(bp, ex, flag, indent + 4))
-			{
-			BIO_printf(bp, "%*s", indent + 4, "");
-			M_ASN1_OCTET_STRING_print(bp,ex->value);
-			}
-		if (BIO_write(bp,"\n",1) <= 0) return 0;
-		}
-	return 1;
-}
-
-static int unknown_ext_print(BIO *out, X509_EXTENSION *ext, unsigned long flag, int indent, int supported)
-{
-	switch(flag & X509V3_EXT_UNKNOWN_MASK) {
-
-		case X509V3_EXT_DEFAULT:
-		return 0;
-
-		case X509V3_EXT_ERROR_UNKNOWN:
-		if(supported)
-			BIO_printf(out, "%*s<Parse Error>", indent, "");
-		else
-			BIO_printf(out, "%*s<Not Supported>", indent, "");
-		return 1;
-
-		case X509V3_EXT_PARSE_UNKNOWN:
-			return ASN1_parse_dump(out,
-				ext->value->data, ext->value->length, indent, -1);
-		case X509V3_EXT_DUMP_UNKNOWN:
-			return BIO_dump_indent(out, (char *)ext->value->data, ext->value->length, indent);
-
-		default:
-		return 1;
-	}
-}
-	
-
-#ifndef OPENSSL_NO_FP_API
-int X509V3_EXT_print_fp(FILE *fp, X509_EXTENSION *ext, int flag, int indent)
-{
-	BIO *bio_tmp;
-	int ret;
-	if(!(bio_tmp = BIO_new_fp(fp, BIO_NOCLOSE))) return 0;
-	ret = X509V3_EXT_print(bio_tmp, ext, flag, indent);
-	BIO_free(bio_tmp);
-	return ret;
-}
-#endif
diff --git a/crypto/openssl/crypto/x509v3/v3_purp.c b/crypto/openssl/crypto/x509v3/v3_purp.c
deleted file mode 100644
index b2f5cdfa05f3..000000000000
--- a/crypto/openssl/crypto/x509v3/v3_purp.c
+++ /dev/null
@@ -1,661 +0,0 @@
-/* v3_purp.c */
-/* Written by Dr Stephen N Henson (shenson@bigfoot.com) for the OpenSSL
- * project 2001.
- */
-/* ====================================================================
- * Copyright (c) 1999-2004 The OpenSSL Project.  All rights reserved.
- *
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions
- * are met:
- *
- * 1. Redistributions of source code must retain the above copyright
- *    notice, this list of conditions and the following disclaimer. 
- *
- * 2. Redistributions in binary form must reproduce the above copyright
- *    notice, this list of conditions and the following disclaimer in
- *    the documentation and/or other materials provided with the
- *    distribution.
- *
- * 3. All advertising materials mentioning features or use of this
- *    software must display the following acknowledgment:
- *    "This product includes software developed by the OpenSSL Project
- *    for use in the OpenSSL Toolkit. (http://www.OpenSSL.org/)"
- *
- * 4. The names "OpenSSL Toolkit" and "OpenSSL Project" must not be used to
- *    endorse or promote products derived from this software without
- *    prior written permission. For written permission, please contact
- *    licensing@OpenSSL.org.
- *
- * 5. Products derived from this software may not be called "OpenSSL"
- *    nor may "OpenSSL" appear in their names without prior written
- *    permission of the OpenSSL Project.
- *
- * 6. Redistributions of any form whatsoever must retain the following
- *    acknowledgment:
- *    "This product includes software developed by the OpenSSL Project
- *    for use in the OpenSSL Toolkit (http://www.OpenSSL.org/)"
- *
- * THIS SOFTWARE IS PROVIDED BY THE OpenSSL PROJECT ``AS IS'' AND ANY
- * EXPRESSED OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
- * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR
- * PURPOSE ARE DISCLAIMED.  IN NO EVENT SHALL THE OpenSSL PROJECT OR
- * ITS CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
- * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
- * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
- * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
- * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
- * STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
- * ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED
- * OF THE POSSIBILITY OF SUCH DAMAGE.
- * ====================================================================
- *
- * This product includes cryptographic software written by Eric Young
- * (eay@cryptsoft.com).  This product includes software written by Tim
- * Hudson (tjh@cryptsoft.com).
- *
- */
-
-#include <stdio.h>
-#include "cryptlib.h"
-#include <openssl/x509v3.h>
-#include <openssl/x509_vfy.h>
-
-static void x509v3_cache_extensions(X509 *x);
-
-static int check_ssl_ca(const X509 *x);
-static int check_purpose_ssl_client(const X509_PURPOSE *xp, const X509 *x, int ca);
-static int check_purpose_ssl_server(const X509_PURPOSE *xp, const X509 *x, int ca);
-static int check_purpose_ns_ssl_server(const X509_PURPOSE *xp, const X509 *x, int ca);
-static int purpose_smime(const X509 *x, int ca);
-static int check_purpose_smime_sign(const X509_PURPOSE *xp, const X509 *x, int ca);
-static int check_purpose_smime_encrypt(const X509_PURPOSE *xp, const X509 *x, int ca);
-static int check_purpose_crl_sign(const X509_PURPOSE *xp, const X509 *x, int ca);
-static int no_check(const X509_PURPOSE *xp, const X509 *x, int ca);
-static int ocsp_helper(const X509_PURPOSE *xp, const X509 *x, int ca);
-
-static int xp_cmp(const X509_PURPOSE * const *a,
-		const X509_PURPOSE * const *b);
-static void xptable_free(X509_PURPOSE *p);
-
-static X509_PURPOSE xstandard[] = {
-	{X509_PURPOSE_SSL_CLIENT, X509_TRUST_SSL_CLIENT, 0, check_purpose_ssl_client, "SSL client", "sslclient", NULL},
-	{X509_PURPOSE_SSL_SERVER, X509_TRUST_SSL_SERVER, 0, check_purpose_ssl_server, "SSL server", "sslserver", NULL},
-	{X509_PURPOSE_NS_SSL_SERVER, X509_TRUST_SSL_SERVER, 0, check_purpose_ns_ssl_server, "Netscape SSL server", "nssslserver", NULL},
-	{X509_PURPOSE_SMIME_SIGN, X509_TRUST_EMAIL, 0, check_purpose_smime_sign, "S/MIME signing", "smimesign", NULL},
-	{X509_PURPOSE_SMIME_ENCRYPT, X509_TRUST_EMAIL, 0, check_purpose_smime_encrypt, "S/MIME encryption", "smimeencrypt", NULL},
-	{X509_PURPOSE_CRL_SIGN, X509_TRUST_COMPAT, 0, check_purpose_crl_sign, "CRL signing", "crlsign", NULL},
-	{X509_PURPOSE_ANY, X509_TRUST_DEFAULT, 0, no_check, "Any Purpose", "any", NULL},
-	{X509_PURPOSE_OCSP_HELPER, X509_TRUST_COMPAT, 0, ocsp_helper, "OCSP helper", "ocsphelper", NULL},
-};
-
-#define X509_PURPOSE_COUNT (sizeof(xstandard)/sizeof(X509_PURPOSE))
-
-IMPLEMENT_STACK_OF(X509_PURPOSE)
-
-static STACK_OF(X509_PURPOSE) *xptable = NULL;
-
-static int xp_cmp(const X509_PURPOSE * const *a,
-		const X509_PURPOSE * const *b)
-{
-	return (*a)->purpose - (*b)->purpose;
-}
-
-/* As much as I'd like to make X509_check_purpose use a "const" X509*
- * I really can't because it does recalculate hashes and do other non-const
- * things. */
-int X509_check_purpose(X509 *x, int id, int ca)
-{
-	int idx;
-	const X509_PURPOSE *pt;
-	if(!(x->ex_flags & EXFLAG_SET)) {
-		CRYPTO_w_lock(CRYPTO_LOCK_X509);
-		x509v3_cache_extensions(x);
-		CRYPTO_w_unlock(CRYPTO_LOCK_X509);
-	}
-	if(id == -1) return 1;
-	idx = X509_PURPOSE_get_by_id(id);
-	if(idx == -1) return -1;
-	pt = X509_PURPOSE_get0(idx);
-	return pt->check_purpose(pt, x, ca);
-}
-
-int X509_PURPOSE_set(int *p, int purpose)
-{
-	if(X509_PURPOSE_get_by_id(purpose) == -1) {
-		X509V3err(X509V3_F_X509_PURPOSE_SET, X509V3_R_INVALID_PURPOSE);
-		return 0;
-	}
-	*p = purpose;
-	return 1;
-}
-
-int X509_PURPOSE_get_count(void)
-{
-	if(!xptable) return X509_PURPOSE_COUNT;
-	return sk_X509_PURPOSE_num(xptable) + X509_PURPOSE_COUNT;
-}
-
-X509_PURPOSE * X509_PURPOSE_get0(int idx)
-{
-	if(idx < 0) return NULL;
-	if(idx < (int)X509_PURPOSE_COUNT) return xstandard + idx;
-	return sk_X509_PURPOSE_value(xptable, idx - X509_PURPOSE_COUNT);
-}
-
-int X509_PURPOSE_get_by_sname(char *sname)
-{
-	int i;
-	X509_PURPOSE *xptmp;
-	for(i = 0; i < X509_PURPOSE_get_count(); i++) {
-		xptmp = X509_PURPOSE_get0(i);
-		if(!strcmp(xptmp->sname, sname)) return i;
-	}
-	return -1;
-}
-
-int X509_PURPOSE_get_by_id(int purpose)
-{
-	X509_PURPOSE tmp;
-	int idx;
-	if((purpose >= X509_PURPOSE_MIN) && (purpose <= X509_PURPOSE_MAX))
-		return purpose - X509_PURPOSE_MIN;
-	tmp.purpose = purpose;
-	if(!xptable) return -1;
-	idx = sk_X509_PURPOSE_find(xptable, &tmp);
-	if(idx == -1) return -1;
-	return idx + X509_PURPOSE_COUNT;
-}
-
-int X509_PURPOSE_add(int id, int trust, int flags,
-			int (*ck)(const X509_PURPOSE *, const X509 *, int),
-					char *name, char *sname, void *arg)
-{
-	int idx;
-	X509_PURPOSE *ptmp;
-	/* This is set according to what we change: application can't set it */
-	flags &= ~X509_PURPOSE_DYNAMIC;
-	/* This will always be set for application modified trust entries */
-	flags |= X509_PURPOSE_DYNAMIC_NAME;
-	/* Get existing entry if any */
-	idx = X509_PURPOSE_get_by_id(id);
-	/* Need a new entry */
-	if(idx == -1) {
-		if(!(ptmp = OPENSSL_malloc(sizeof(X509_PURPOSE)))) {
-			X509V3err(X509V3_F_X509_PURPOSE_ADD,ERR_R_MALLOC_FAILURE);
-			return 0;
-		}
-		ptmp->flags = X509_PURPOSE_DYNAMIC;
-	} else ptmp = X509_PURPOSE_get0(idx);
-
-	/* OPENSSL_free existing name if dynamic */
-	if(ptmp->flags & X509_PURPOSE_DYNAMIC_NAME) {
-		OPENSSL_free(ptmp->name);
-		OPENSSL_free(ptmp->sname);
-	}
-	/* dup supplied name */
-	ptmp->name = BUF_strdup(name);
-	ptmp->sname = BUF_strdup(sname);
-	if(!ptmp->name || !ptmp->sname) {
-		X509V3err(X509V3_F_X509_PURPOSE_ADD,ERR_R_MALLOC_FAILURE);
-		return 0;
-	}
-	/* Keep the dynamic flag of existing entry */
-	ptmp->flags &= X509_PURPOSE_DYNAMIC;
-	/* Set all other flags */
-	ptmp->flags |= flags;
-
-	ptmp->purpose = id;
-	ptmp->trust = trust;
-	ptmp->check_purpose = ck;
-	ptmp->usr_data = arg;
-
-	/* If its a new entry manage the dynamic table */
-	if(idx == -1) {
-		if(!xptable && !(xptable = sk_X509_PURPOSE_new(xp_cmp))) {
-			X509V3err(X509V3_F_X509_PURPOSE_ADD,ERR_R_MALLOC_FAILURE);
-			return 0;
-		}
-		if (!sk_X509_PURPOSE_push(xptable, ptmp)) {
-			X509V3err(X509V3_F_X509_PURPOSE_ADD,ERR_R_MALLOC_FAILURE);
-			return 0;
-		}
-	}
-	return 1;
-}
-
-static void xptable_free(X509_PURPOSE *p)
-	{
-	if(!p) return;
-	if (p->flags & X509_PURPOSE_DYNAMIC) 
-		{
-		if (p->flags & X509_PURPOSE_DYNAMIC_NAME) {
-			OPENSSL_free(p->name);
-			OPENSSL_free(p->sname);
-		}
-		OPENSSL_free(p);
-		}
-	}
-
-void X509_PURPOSE_cleanup(void)
-{
-	unsigned int i;
-	sk_X509_PURPOSE_pop_free(xptable, xptable_free);
-	for(i = 0; i < X509_PURPOSE_COUNT; i++) xptable_free(xstandard + i);
-	xptable = NULL;
-}
-
-int X509_PURPOSE_get_id(X509_PURPOSE *xp)
-{
-	return xp->purpose;
-}
-
-char *X509_PURPOSE_get0_name(X509_PURPOSE *xp)
-{
-	return xp->name;
-}
-
-char *X509_PURPOSE_get0_sname(X509_PURPOSE *xp)
-{
-	return xp->sname;
-}
-
-int X509_PURPOSE_get_trust(X509_PURPOSE *xp)
-{
-	return xp->trust;
-}
-
-static int nid_cmp(int *a, int *b)
-	{
-	return *a - *b;
-	}
-
-int X509_supported_extension(X509_EXTENSION *ex)
-	{
-	/* This table is a list of the NIDs of supported extensions:
-	 * that is those which are used by the verify process. If
-	 * an extension is critical and doesn't appear in this list
-	 * then the verify process will normally reject the certificate.
-	 * The list must be kept in numerical order because it will be
-	 * searched using bsearch.
-	 */
-
-	static int supported_nids[] = {
-		NID_netscape_cert_type, /* 71 */
-        	NID_key_usage,		/* 83 */
-		NID_subject_alt_name,	/* 85 */
-		NID_basic_constraints,	/* 87 */
-		NID_certificate_policies, /* 89 */
-        	NID_ext_key_usage,	/* 126 */
-#ifndef OPENSSL_NO_RFC3779
-		NID_sbgp_ipAddrBlock,	/* 290 */
-		NID_sbgp_autonomousSysNum, /* 291 */
-#endif
-		NID_proxyCertInfo	/* 661 */
-	};
-
-	int ex_nid;
-
-	ex_nid = OBJ_obj2nid(X509_EXTENSION_get_object(ex));
-
-	if (ex_nid == NID_undef) 
-		return 0;
-
-	if (OBJ_bsearch((char *)&ex_nid, (char *)supported_nids,
-		sizeof(supported_nids)/sizeof(int), sizeof(int),
-		(int (*)(const void *, const void *))nid_cmp))
-		return 1;
-	return 0;
-	}
- 
-
-static void x509v3_cache_extensions(X509 *x)
-{
-	BASIC_CONSTRAINTS *bs;
-	PROXY_CERT_INFO_EXTENSION *pci;
-	ASN1_BIT_STRING *usage;
-	ASN1_BIT_STRING *ns;
-	EXTENDED_KEY_USAGE *extusage;
-	X509_EXTENSION *ex;
-	
-	int i;
-	if(x->ex_flags & EXFLAG_SET) return;
-#ifndef OPENSSL_NO_SHA
-	X509_digest(x, EVP_sha1(), x->sha1_hash, NULL);
-#endif
-	/* Does subject name match issuer ? */
-	if(!X509_NAME_cmp(X509_get_subject_name(x), X509_get_issuer_name(x)))
-			 x->ex_flags |= EXFLAG_SS;
-	/* V1 should mean no extensions ... */
-	if(!X509_get_version(x)) x->ex_flags |= EXFLAG_V1;
-	/* Handle basic constraints */
-	if((bs=X509_get_ext_d2i(x, NID_basic_constraints, NULL, NULL))) {
-		if(bs->ca) x->ex_flags |= EXFLAG_CA;
-		if(bs->pathlen) {
-			if((bs->pathlen->type == V_ASN1_NEG_INTEGER)
-						|| !bs->ca) {
-				x->ex_flags |= EXFLAG_INVALID;
-				x->ex_pathlen = 0;
-			} else x->ex_pathlen = ASN1_INTEGER_get(bs->pathlen);
-		} else x->ex_pathlen = -1;
-		BASIC_CONSTRAINTS_free(bs);
-		x->ex_flags |= EXFLAG_BCONS;
-	}
-	/* Handle proxy certificates */
-	if((pci=X509_get_ext_d2i(x, NID_proxyCertInfo, NULL, NULL))) {
-		if (x->ex_flags & EXFLAG_CA
-		    || X509_get_ext_by_NID(x, NID_subject_alt_name, 0) >= 0
-		    || X509_get_ext_by_NID(x, NID_issuer_alt_name, 0) >= 0) {
-			x->ex_flags |= EXFLAG_INVALID;
-		}
-		if (pci->pcPathLengthConstraint) {
-			x->ex_pcpathlen =
-				ASN1_INTEGER_get(pci->pcPathLengthConstraint);
-		} else x->ex_pcpathlen = -1;
-		PROXY_CERT_INFO_EXTENSION_free(pci);
-		x->ex_flags |= EXFLAG_PROXY;
-	}
-	/* Handle key usage */
-	if((usage=X509_get_ext_d2i(x, NID_key_usage, NULL, NULL))) {
-		if(usage->length > 0) {
-			x->ex_kusage = usage->data[0];
-			if(usage->length > 1) 
-				x->ex_kusage |= usage->data[1] << 8;
-		} else x->ex_kusage = 0;
-		x->ex_flags |= EXFLAG_KUSAGE;
-		ASN1_BIT_STRING_free(usage);
-	}
-	x->ex_xkusage = 0;
-	if((extusage=X509_get_ext_d2i(x, NID_ext_key_usage, NULL, NULL))) {
-		x->ex_flags |= EXFLAG_XKUSAGE;
-		for(i = 0; i < sk_ASN1_OBJECT_num(extusage); i++) {
-			switch(OBJ_obj2nid(sk_ASN1_OBJECT_value(extusage,i))) {
-				case NID_server_auth:
-				x->ex_xkusage |= XKU_SSL_SERVER;
-				break;
-
-				case NID_client_auth:
-				x->ex_xkusage |= XKU_SSL_CLIENT;
-				break;
-
-				case NID_email_protect:
-				x->ex_xkusage |= XKU_SMIME;
-				break;
-
-				case NID_code_sign:
-				x->ex_xkusage |= XKU_CODE_SIGN;
-				break;
-
-				case NID_ms_sgc:
-				case NID_ns_sgc:
-				x->ex_xkusage |= XKU_SGC;
-				break;
-
-				case NID_OCSP_sign:
-				x->ex_xkusage |= XKU_OCSP_SIGN;
-				break;
-
-				case NID_time_stamp:
-				x->ex_xkusage |= XKU_TIMESTAMP;
-				break;
-
-				case NID_dvcs:
-				x->ex_xkusage |= XKU_DVCS;
-				break;
-			}
-		}
-		sk_ASN1_OBJECT_pop_free(extusage, ASN1_OBJECT_free);
-	}
-
-	if((ns=X509_get_ext_d2i(x, NID_netscape_cert_type, NULL, NULL))) {
-		if(ns->length > 0) x->ex_nscert = ns->data[0];
-		else x->ex_nscert = 0;
-		x->ex_flags |= EXFLAG_NSCERT;
-		ASN1_BIT_STRING_free(ns);
-	}
-	x->skid =X509_get_ext_d2i(x, NID_subject_key_identifier, NULL, NULL);
-	x->akid =X509_get_ext_d2i(x, NID_authority_key_identifier, NULL, NULL);
-#ifndef OPENSSL_NO_RFC3779
-	x->rfc3779_addr =X509_get_ext_d2i(x, NID_sbgp_ipAddrBlock, NULL, NULL);
-	x->rfc3779_asid =X509_get_ext_d2i(x, NID_sbgp_autonomousSysNum,
-					  NULL, NULL);
-#endif
-	for (i = 0; i < X509_get_ext_count(x); i++)
-		{
-		ex = X509_get_ext(x, i);
-		if (!X509_EXTENSION_get_critical(ex))
-			continue;
-		if (!X509_supported_extension(ex))
-			{
-			x->ex_flags |= EXFLAG_CRITICAL;
-			break;
-			}
-		}
-	x->ex_flags |= EXFLAG_SET;
-}
-
-/* CA checks common to all purposes
- * return codes:
- * 0 not a CA
- * 1 is a CA
- * 2 basicConstraints absent so "maybe" a CA
- * 3 basicConstraints absent but self signed V1.
- * 4 basicConstraints absent but keyUsage present and keyCertSign asserted.
- */
-
-#define V1_ROOT (EXFLAG_V1|EXFLAG_SS)
-#define ku_reject(x, usage) \
-	(((x)->ex_flags & EXFLAG_KUSAGE) && !((x)->ex_kusage & (usage)))
-#define xku_reject(x, usage) \
-	(((x)->ex_flags & EXFLAG_XKUSAGE) && !((x)->ex_xkusage & (usage)))
-#define ns_reject(x, usage) \
-	(((x)->ex_flags & EXFLAG_NSCERT) && !((x)->ex_nscert & (usage)))
-
-static int check_ca(const X509 *x)
-{
-	/* keyUsage if present should allow cert signing */
-	if(ku_reject(x, KU_KEY_CERT_SIGN)) return 0;
-	if(x->ex_flags & EXFLAG_BCONS) {
-		if(x->ex_flags & EXFLAG_CA) return 1;
-		/* If basicConstraints says not a CA then say so */
-		else return 0;
-	} else {
-		/* we support V1 roots for...  uh, I don't really know why. */
-		if((x->ex_flags & V1_ROOT) == V1_ROOT) return 3;
-		/* If key usage present it must have certSign so tolerate it */
-		else if (x->ex_flags & EXFLAG_KUSAGE) return 4;
-		/* Older certificates could have Netscape-specific CA types */
-		else if (x->ex_flags & EXFLAG_NSCERT
-			 && x->ex_nscert & NS_ANY_CA) return 5;
-		/* can this still be regarded a CA certificate?  I doubt it */
-		return 0;
-	}
-}
-
-int X509_check_ca(X509 *x)
-{
-	if(!(x->ex_flags & EXFLAG_SET)) {
-		CRYPTO_w_lock(CRYPTO_LOCK_X509);
-		x509v3_cache_extensions(x);
-		CRYPTO_w_unlock(CRYPTO_LOCK_X509);
-	}
-
-	return check_ca(x);
-}
-
-/* Check SSL CA: common checks for SSL client and server */
-static int check_ssl_ca(const X509 *x)
-{
-	int ca_ret;
-	ca_ret = check_ca(x);
-	if(!ca_ret) return 0;
-	/* check nsCertType if present */
-	if(ca_ret != 5 || x->ex_nscert & NS_SSL_CA) return ca_ret;
-	else return 0;
-}
-
-
-static int check_purpose_ssl_client(const X509_PURPOSE *xp, const X509 *x, int ca)
-{
-	if(xku_reject(x,XKU_SSL_CLIENT)) return 0;
-	if(ca) return check_ssl_ca(x);
-	/* We need to do digital signatures with it */
-	if(ku_reject(x,KU_DIGITAL_SIGNATURE)) return 0;
-	/* nsCertType if present should allow SSL client use */	
-	if(ns_reject(x, NS_SSL_CLIENT)) return 0;
-	return 1;
-}
-
-static int check_purpose_ssl_server(const X509_PURPOSE *xp, const X509 *x, int ca)
-{
-	if(xku_reject(x,XKU_SSL_SERVER|XKU_SGC)) return 0;
-	if(ca) return check_ssl_ca(x);
-
-	if(ns_reject(x, NS_SSL_SERVER)) return 0;
-	/* Now as for keyUsage: we'll at least need to sign OR encipher */
-	if(ku_reject(x, KU_DIGITAL_SIGNATURE|KU_KEY_ENCIPHERMENT)) return 0;
-	
-	return 1;
-
-}
-
-static int check_purpose_ns_ssl_server(const X509_PURPOSE *xp, const X509 *x, int ca)
-{
-	int ret;
-	ret = check_purpose_ssl_server(xp, x, ca);
-	if(!ret || ca) return ret;
-	/* We need to encipher or Netscape complains */
-	if(ku_reject(x, KU_KEY_ENCIPHERMENT)) return 0;
-	return ret;
-}
-
-/* common S/MIME checks */
-static int purpose_smime(const X509 *x, int ca)
-{
-	if(xku_reject(x,XKU_SMIME)) return 0;
-	if(ca) {
-		int ca_ret;
-		ca_ret = check_ca(x);
-		if(!ca_ret) return 0;
-		/* check nsCertType if present */
-		if(ca_ret != 5 || x->ex_nscert & NS_SMIME_CA) return ca_ret;
-		else return 0;
-	}
-	if(x->ex_flags & EXFLAG_NSCERT) {
-		if(x->ex_nscert & NS_SMIME) return 1;
-		/* Workaround for some buggy certificates */
-		if(x->ex_nscert & NS_SSL_CLIENT) return 2;
-		return 0;
-	}
-	return 1;
-}
-
-static int check_purpose_smime_sign(const X509_PURPOSE *xp, const X509 *x, int ca)
-{
-	int ret;
-	ret = purpose_smime(x, ca);
-	if(!ret || ca) return ret;
-	if(ku_reject(x, KU_DIGITAL_SIGNATURE|KU_NON_REPUDIATION)) return 0;
-	return ret;
-}
-
-static int check_purpose_smime_encrypt(const X509_PURPOSE *xp, const X509 *x, int ca)
-{
-	int ret;
-	ret = purpose_smime(x, ca);
-	if(!ret || ca) return ret;
-	if(ku_reject(x, KU_KEY_ENCIPHERMENT)) return 0;
-	return ret;
-}
-
-static int check_purpose_crl_sign(const X509_PURPOSE *xp, const X509 *x, int ca)
-{
-	if(ca) {
-		int ca_ret;
-		if((ca_ret = check_ca(x)) != 2) return ca_ret;
-		else return 0;
-	}
-	if(ku_reject(x, KU_CRL_SIGN)) return 0;
-	return 1;
-}
-
-/* OCSP helper: this is *not* a full OCSP check. It just checks that
- * each CA is valid. Additional checks must be made on the chain.
- */
-
-static int ocsp_helper(const X509_PURPOSE *xp, const X509 *x, int ca)
-{
-	/* Must be a valid CA.  Should we really support the "I don't know"
-	   value (2)? */
-	if(ca) return check_ca(x);
-	/* leaf certificate is checked in OCSP_verify() */
-	return 1;
-}
-
-static int no_check(const X509_PURPOSE *xp, const X509 *x, int ca)
-{
-	return 1;
-}
-
-/* Various checks to see if one certificate issued the second.
- * This can be used to prune a set of possible issuer certificates
- * which have been looked up using some simple method such as by
- * subject name.
- * These are:
- * 1. Check issuer_name(subject) == subject_name(issuer)
- * 2. If akid(subject) exists check it matches issuer
- * 3. If key_usage(issuer) exists check it supports certificate signing
- * returns 0 for OK, positive for reason for mismatch, reasons match
- * codes for X509_verify_cert()
- */
-
-int X509_check_issued(X509 *issuer, X509 *subject)
-{
-	if(X509_NAME_cmp(X509_get_subject_name(issuer),
-			X509_get_issuer_name(subject)))
-				return X509_V_ERR_SUBJECT_ISSUER_MISMATCH;
-	x509v3_cache_extensions(issuer);
-	x509v3_cache_extensions(subject);
-	if(subject->akid) {
-		/* Check key ids (if present) */
-		if(subject->akid->keyid && issuer->skid &&
-		 ASN1_OCTET_STRING_cmp(subject->akid->keyid, issuer->skid) )
-				return X509_V_ERR_AKID_SKID_MISMATCH;
-		/* Check serial number */
-		if(subject->akid->serial &&
-			ASN1_INTEGER_cmp(X509_get_serialNumber(issuer),
-						subject->akid->serial))
-				return X509_V_ERR_AKID_ISSUER_SERIAL_MISMATCH;
-		/* Check issuer name */
-		if(subject->akid->issuer) {
-			/* Ugh, for some peculiar reason AKID includes
-			 * SEQUENCE OF GeneralName. So look for a DirName.
-			 * There may be more than one but we only take any
-			 * notice of the first.
-			 */
-			GENERAL_NAMES *gens;
-			GENERAL_NAME *gen;
-			X509_NAME *nm = NULL;
-			int i;
-			gens = subject->akid->issuer;
-			for(i = 0; i < sk_GENERAL_NAME_num(gens); i++) {
-				gen = sk_GENERAL_NAME_value(gens, i);
-				if(gen->type == GEN_DIRNAME) {
-					nm = gen->d.dirn;
-					break;
-				}
-			}
-			if(nm && X509_NAME_cmp(nm, X509_get_issuer_name(issuer)))
-				return X509_V_ERR_AKID_ISSUER_SERIAL_MISMATCH;
-		}
-	}
-	if(subject->ex_flags & EXFLAG_PROXY)
-		{
-		if(ku_reject(issuer, KU_DIGITAL_SIGNATURE))
-			return X509_V_ERR_KEYUSAGE_NO_DIGITAL_SIGNATURE;
-		}
-	else if(ku_reject(issuer, KU_KEY_CERT_SIGN))
-		return X509_V_ERR_KEYUSAGE_NO_CERTSIGN;
-	return X509_V_OK;
-}
-
diff --git a/crypto/openssl/crypto/x509v3/v3_skey.c b/crypto/openssl/crypto/x509v3/v3_skey.c
deleted file mode 100644
index da0a3558f65b..000000000000
--- a/crypto/openssl/crypto/x509v3/v3_skey.c
+++ /dev/null
@@ -1,144 +0,0 @@
-/* v3_skey.c */
-/* Written by Dr Stephen N Henson (shenson@bigfoot.com) for the OpenSSL
- * project 1999.
- */
-/* ====================================================================
- * Copyright (c) 1999 The OpenSSL Project.  All rights reserved.
- *
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions
- * are met:
- *
- * 1. Redistributions of source code must retain the above copyright
- *    notice, this list of conditions and the following disclaimer. 
- *
- * 2. Redistributions in binary form must reproduce the above copyright
- *    notice, this list of conditions and the following disclaimer in
- *    the documentation and/or other materials provided with the
- *    distribution.
- *
- * 3. All advertising materials mentioning features or use of this
- *    software must display the following acknowledgment:
- *    "This product includes software developed by the OpenSSL Project
- *    for use in the OpenSSL Toolkit. (http://www.OpenSSL.org/)"
- *
- * 4. The names "OpenSSL Toolkit" and "OpenSSL Project" must not be used to
- *    endorse or promote products derived from this software without
- *    prior written permission. For written permission, please contact
- *    licensing@OpenSSL.org.
- *
- * 5. Products derived from this software may not be called "OpenSSL"
- *    nor may "OpenSSL" appear in their names without prior written
- *    permission of the OpenSSL Project.
- *
- * 6. Redistributions of any form whatsoever must retain the following
- *    acknowledgment:
- *    "This product includes software developed by the OpenSSL Project
- *    for use in the OpenSSL Toolkit (http://www.OpenSSL.org/)"
- *
- * THIS SOFTWARE IS PROVIDED BY THE OpenSSL PROJECT ``AS IS'' AND ANY
- * EXPRESSED OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
- * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR
- * PURPOSE ARE DISCLAIMED.  IN NO EVENT SHALL THE OpenSSL PROJECT OR
- * ITS CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
- * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
- * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
- * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
- * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
- * STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
- * ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED
- * OF THE POSSIBILITY OF SUCH DAMAGE.
- * ====================================================================
- *
- * This product includes cryptographic software written by Eric Young
- * (eay@cryptsoft.com).  This product includes software written by Tim
- * Hudson (tjh@cryptsoft.com).
- *
- */
-
-
-#include <stdio.h>
-#include "cryptlib.h"
-#include <openssl/x509v3.h>
-
-static ASN1_OCTET_STRING *s2i_skey_id(X509V3_EXT_METHOD *method, X509V3_CTX *ctx, char *str);
-const X509V3_EXT_METHOD v3_skey_id = { 
-NID_subject_key_identifier, 0, ASN1_ITEM_ref(ASN1_OCTET_STRING),
-0,0,0,0,
-(X509V3_EXT_I2S)i2s_ASN1_OCTET_STRING,
-(X509V3_EXT_S2I)s2i_skey_id,
-0,0,0,0,
-NULL};
-
-char *i2s_ASN1_OCTET_STRING(X509V3_EXT_METHOD *method,
-	     ASN1_OCTET_STRING *oct)
-{
-	return hex_to_string(oct->data, oct->length);
-}
-
-ASN1_OCTET_STRING *s2i_ASN1_OCTET_STRING(X509V3_EXT_METHOD *method,
-	     X509V3_CTX *ctx, char *str)
-{
-	ASN1_OCTET_STRING *oct;
-	long length;
-
-	if(!(oct = M_ASN1_OCTET_STRING_new())) {
-		X509V3err(X509V3_F_S2I_ASN1_OCTET_STRING,ERR_R_MALLOC_FAILURE);
-		return NULL;
-	}
-
-	if(!(oct->data = string_to_hex(str, &length))) {
-		M_ASN1_OCTET_STRING_free(oct);
-		return NULL;
-	}
-
-	oct->length = length;
-
-	return oct;
-
-}
-
-static ASN1_OCTET_STRING *s2i_skey_id(X509V3_EXT_METHOD *method,
-	     X509V3_CTX *ctx, char *str)
-{
-	ASN1_OCTET_STRING *oct;
-	ASN1_BIT_STRING *pk;
-	unsigned char pkey_dig[EVP_MAX_MD_SIZE];
-	unsigned int diglen;
-
-	if(strcmp(str, "hash")) return s2i_ASN1_OCTET_STRING(method, ctx, str);
-
-	if(!(oct = M_ASN1_OCTET_STRING_new())) {
-		X509V3err(X509V3_F_S2I_SKEY_ID,ERR_R_MALLOC_FAILURE);
-		return NULL;
-	}
-
-	if(ctx && (ctx->flags == CTX_TEST)) return oct;
-
-	if(!ctx || (!ctx->subject_req && !ctx->subject_cert)) {
-		X509V3err(X509V3_F_S2I_SKEY_ID,X509V3_R_NO_PUBLIC_KEY);
-		goto err;
-	}
-
-	if(ctx->subject_req) 
-		pk = ctx->subject_req->req_info->pubkey->public_key;
-	else pk = ctx->subject_cert->cert_info->key->public_key;
-
-	if(!pk) {
-		X509V3err(X509V3_F_S2I_SKEY_ID,X509V3_R_NO_PUBLIC_KEY);
-		goto err;
-	}
-
-	EVP_Digest(pk->data, pk->length, pkey_dig, &diglen, EVP_sha1(), NULL);
-
-	if(!M_ASN1_OCTET_STRING_set(oct, pkey_dig, diglen)) {
-		X509V3err(X509V3_F_S2I_SKEY_ID,ERR_R_MALLOC_FAILURE);
-		goto err;
-	}
-
-	return oct;
-	
-	err:
-	M_ASN1_OCTET_STRING_free(oct);
-	return NULL;
-}
diff --git a/crypto/openssl/crypto/x509v3/v3_sxnet.c b/crypto/openssl/crypto/x509v3/v3_sxnet.c
deleted file mode 100644
index eaea9ea01b4b..000000000000
--- a/crypto/openssl/crypto/x509v3/v3_sxnet.c
+++ /dev/null
@@ -1,262 +0,0 @@
-/* v3_sxnet.c */
-/* Written by Dr Stephen N Henson (shenson@bigfoot.com) for the OpenSSL
- * project 1999.
- */
-/* ====================================================================
- * Copyright (c) 1999 The OpenSSL Project.  All rights reserved.
- *
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions
- * are met:
- *
- * 1. Redistributions of source code must retain the above copyright
- *    notice, this list of conditions and the following disclaimer. 
- *
- * 2. Redistributions in binary form must reproduce the above copyright
- *    notice, this list of conditions and the following disclaimer in
- *    the documentation and/or other materials provided with the
- *    distribution.
- *
- * 3. All advertising materials mentioning features or use of this
- *    software must display the following acknowledgment:
- *    "This product includes software developed by the OpenSSL Project
- *    for use in the OpenSSL Toolkit. (http://www.OpenSSL.org/)"
- *
- * 4. The names "OpenSSL Toolkit" and "OpenSSL Project" must not be used to
- *    endorse or promote products derived from this software without
- *    prior written permission. For written permission, please contact
- *    licensing@OpenSSL.org.
- *
- * 5. Products derived from this software may not be called "OpenSSL"
- *    nor may "OpenSSL" appear in their names without prior written
- *    permission of the OpenSSL Project.
- *
- * 6. Redistributions of any form whatsoever must retain the following
- *    acknowledgment:
- *    "This product includes software developed by the OpenSSL Project
- *    for use in the OpenSSL Toolkit (http://www.OpenSSL.org/)"
- *
- * THIS SOFTWARE IS PROVIDED BY THE OpenSSL PROJECT ``AS IS'' AND ANY
- * EXPRESSED OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
- * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR
- * PURPOSE ARE DISCLAIMED.  IN NO EVENT SHALL THE OpenSSL PROJECT OR
- * ITS CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
- * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
- * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
- * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
- * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
- * STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
- * ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED
- * OF THE POSSIBILITY OF SUCH DAMAGE.
- * ====================================================================
- *
- * This product includes cryptographic software written by Eric Young
- * (eay@cryptsoft.com).  This product includes software written by Tim
- * Hudson (tjh@cryptsoft.com).
- *
- */
-
-#include <stdio.h>
-#include "cryptlib.h"
-#include <openssl/conf.h>
-#include <openssl/asn1.h>
-#include <openssl/asn1t.h>
-#include <openssl/x509v3.h>
-
-/* Support for Thawte strong extranet extension */
-
-#define SXNET_TEST
-
-static int sxnet_i2r(X509V3_EXT_METHOD *method, SXNET *sx, BIO *out, int indent);
-#ifdef SXNET_TEST
-static SXNET * sxnet_v2i(X509V3_EXT_METHOD *method, X509V3_CTX *ctx,
-						STACK_OF(CONF_VALUE) *nval);
-#endif
-const X509V3_EXT_METHOD v3_sxnet = {
-NID_sxnet, X509V3_EXT_MULTILINE, ASN1_ITEM_ref(SXNET),
-0,0,0,0,
-0,0,
-0, 
-#ifdef SXNET_TEST
-(X509V3_EXT_V2I)sxnet_v2i,
-#else
-0,
-#endif
-(X509V3_EXT_I2R)sxnet_i2r,
-0,
-NULL
-};
-
-ASN1_SEQUENCE(SXNETID) = {
-	ASN1_SIMPLE(SXNETID, zone, ASN1_INTEGER),
-	ASN1_SIMPLE(SXNETID, user, ASN1_OCTET_STRING)
-} ASN1_SEQUENCE_END(SXNETID)
-
-IMPLEMENT_ASN1_FUNCTIONS(SXNETID)
-
-ASN1_SEQUENCE(SXNET) = {
-	ASN1_SIMPLE(SXNET, version, ASN1_INTEGER),
-	ASN1_SEQUENCE_OF(SXNET, ids, SXNETID)
-} ASN1_SEQUENCE_END(SXNET)
-
-IMPLEMENT_ASN1_FUNCTIONS(SXNET)
-
-static int sxnet_i2r(X509V3_EXT_METHOD *method, SXNET *sx, BIO *out,
-	     int indent)
-{
-	long v;
-	char *tmp;
-	SXNETID *id;
-	int i;
-	v = ASN1_INTEGER_get(sx->version);
-	BIO_printf(out, "%*sVersion: %ld (0x%lX)", indent, "", v + 1, v);
-	for(i = 0; i < sk_SXNETID_num(sx->ids); i++) {
-		id = sk_SXNETID_value(sx->ids, i);
-		tmp = i2s_ASN1_INTEGER(NULL, id->zone);
-		BIO_printf(out, "\n%*sZone: %s, User: ", indent, "", tmp);
-		OPENSSL_free(tmp);
-		M_ASN1_OCTET_STRING_print(out, id->user);
-	}
-	return 1;
-}
-
-#ifdef SXNET_TEST
-
-/* NBB: this is used for testing only. It should *not* be used for anything
- * else because it will just take static IDs from the configuration file and
- * they should really be separate values for each user.
- */
-
-
-static SXNET * sxnet_v2i(X509V3_EXT_METHOD *method, X509V3_CTX *ctx,
-	     STACK_OF(CONF_VALUE) *nval)
-{
-	CONF_VALUE *cnf;
-	SXNET *sx = NULL;
-	int i;
-	for(i = 0; i < sk_CONF_VALUE_num(nval); i++) {
-		cnf = sk_CONF_VALUE_value(nval, i);
-		if(!SXNET_add_id_asc(&sx, cnf->name, cnf->value, -1))
-								 return NULL;
-	}
-	return sx;
-}
-		
-	
-#endif
-
-/* Strong Extranet utility functions */
-
-/* Add an id given the zone as an ASCII number */
-
-int SXNET_add_id_asc(SXNET **psx, char *zone, char *user,
-	     int userlen)
-{
-	ASN1_INTEGER *izone = NULL;
-	if(!(izone = s2i_ASN1_INTEGER(NULL, zone))) {
-		X509V3err(X509V3_F_SXNET_ADD_ID_ASC,X509V3_R_ERROR_CONVERTING_ZONE);
-		return 0;
-	}
-	return SXNET_add_id_INTEGER(psx, izone, user, userlen);
-}
-
-/* Add an id given the zone as an unsigned long */
-
-int SXNET_add_id_ulong(SXNET **psx, unsigned long lzone, char *user,
-	     int userlen)
-{
-	ASN1_INTEGER *izone = NULL;
-	if(!(izone = M_ASN1_INTEGER_new()) || !ASN1_INTEGER_set(izone, lzone)) {
-		X509V3err(X509V3_F_SXNET_ADD_ID_ULONG,ERR_R_MALLOC_FAILURE);
-		M_ASN1_INTEGER_free(izone);
-		return 0;
-	}
-	return SXNET_add_id_INTEGER(psx, izone, user, userlen);
-	
-}
-
-/* Add an id given the zone as an ASN1_INTEGER.
- * Note this version uses the passed integer and doesn't make a copy so don't
- * free it up afterwards.
- */
-
-int SXNET_add_id_INTEGER(SXNET **psx, ASN1_INTEGER *zone, char *user,
-	     int userlen)
-{
-	SXNET *sx = NULL;
-	SXNETID *id = NULL;
-	if(!psx || !zone || !user) {
-		X509V3err(X509V3_F_SXNET_ADD_ID_INTEGER,X509V3_R_INVALID_NULL_ARGUMENT);
-		return 0;
-	}
-	if(userlen == -1) userlen = strlen(user);
-	if(userlen > 64) {
-		X509V3err(X509V3_F_SXNET_ADD_ID_INTEGER,X509V3_R_USER_TOO_LONG);
-		return 0;
-	}
-	if(!*psx) {
-		if(!(sx = SXNET_new())) goto err;
-		if(!ASN1_INTEGER_set(sx->version, 0)) goto err;
-		*psx = sx;
-	} else sx = *psx;
-	if(SXNET_get_id_INTEGER(sx, zone)) {
-		X509V3err(X509V3_F_SXNET_ADD_ID_INTEGER,X509V3_R_DUPLICATE_ZONE_ID);
-		return 0;
-	}
-
-	if(!(id = SXNETID_new())) goto err;
-	if(userlen == -1) userlen = strlen(user);
-		
-	if(!M_ASN1_OCTET_STRING_set(id->user, user, userlen)) goto err;
-	if(!sk_SXNETID_push(sx->ids, id)) goto err;
-	id->zone = zone;
-	return 1;
-	
-	err:
-	X509V3err(X509V3_F_SXNET_ADD_ID_INTEGER,ERR_R_MALLOC_FAILURE);
-	SXNETID_free(id);
-	SXNET_free(sx);
-	*psx = NULL;
-	return 0;
-}
-
-ASN1_OCTET_STRING *SXNET_get_id_asc(SXNET *sx, char *zone)
-{
-	ASN1_INTEGER *izone = NULL;
-	ASN1_OCTET_STRING *oct;
-	if(!(izone = s2i_ASN1_INTEGER(NULL, zone))) {
-		X509V3err(X509V3_F_SXNET_GET_ID_ASC,X509V3_R_ERROR_CONVERTING_ZONE);
-		return NULL;
-	}
-	oct = SXNET_get_id_INTEGER(sx, izone);
-	M_ASN1_INTEGER_free(izone);
-	return oct;
-}
-
-ASN1_OCTET_STRING *SXNET_get_id_ulong(SXNET *sx, unsigned long lzone)
-{
-	ASN1_INTEGER *izone = NULL;
-	ASN1_OCTET_STRING *oct;
-	if(!(izone = M_ASN1_INTEGER_new()) || !ASN1_INTEGER_set(izone, lzone)) {
-		X509V3err(X509V3_F_SXNET_GET_ID_ULONG,ERR_R_MALLOC_FAILURE);
-		M_ASN1_INTEGER_free(izone);
-		return NULL;
-	}
-	oct = SXNET_get_id_INTEGER(sx, izone);
-	M_ASN1_INTEGER_free(izone);
-	return oct;
-}
-
-ASN1_OCTET_STRING *SXNET_get_id_INTEGER(SXNET *sx, ASN1_INTEGER *zone)
-{
-	SXNETID *id;
-	int i;
-	for(i = 0; i < sk_SXNETID_num(sx->ids); i++) {
-		id = sk_SXNETID_value(sx->ids, i);
-		if(!M_ASN1_INTEGER_cmp(id->zone, zone)) return id->user;
-	}
-	return NULL;
-}
-
-IMPLEMENT_STACK_OF(SXNETID)
-IMPLEMENT_ASN1_SET_OF(SXNETID)
diff --git a/crypto/openssl/crypto/x509v3/v3_utl.c b/crypto/openssl/crypto/x509v3/v3_utl.c
deleted file mode 100644
index 3dba0557b86d..000000000000
--- a/crypto/openssl/crypto/x509v3/v3_utl.c
+++ /dev/null
@@ -1,844 +0,0 @@
-/* v3_utl.c */
-/* Written by Dr Stephen N Henson (shenson@bigfoot.com) for the OpenSSL
- * project.
- */
-/* ====================================================================
- * Copyright (c) 1999-2003 The OpenSSL Project.  All rights reserved.
- *
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions
- * are met:
- *
- * 1. Redistributions of source code must retain the above copyright
- *    notice, this list of conditions and the following disclaimer. 
- *
- * 2. Redistributions in binary form must reproduce the above copyright
- *    notice, this list of conditions and the following disclaimer in
- *    the documentation and/or other materials provided with the
- *    distribution.
- *
- * 3. All advertising materials mentioning features or use of this
- *    software must display the following acknowledgment:
- *    "This product includes software developed by the OpenSSL Project
- *    for use in the OpenSSL Toolkit. (http://www.OpenSSL.org/)"
- *
- * 4. The names "OpenSSL Toolkit" and "OpenSSL Project" must not be used to
- *    endorse or promote products derived from this software without
- *    prior written permission. For written permission, please contact
- *    licensing@OpenSSL.org.
- *
- * 5. Products derived from this software may not be called "OpenSSL"
- *    nor may "OpenSSL" appear in their names without prior written
- *    permission of the OpenSSL Project.
- *
- * 6. Redistributions of any form whatsoever must retain the following
- *    acknowledgment:
- *    "This product includes software developed by the OpenSSL Project
- *    for use in the OpenSSL Toolkit (http://www.OpenSSL.org/)"
- *
- * THIS SOFTWARE IS PROVIDED BY THE OpenSSL PROJECT ``AS IS'' AND ANY
- * EXPRESSED OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
- * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR
- * PURPOSE ARE DISCLAIMED.  IN NO EVENT SHALL THE OpenSSL PROJECT OR
- * ITS CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
- * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
- * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
- * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
- * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
- * STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
- * ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED
- * OF THE POSSIBILITY OF SUCH DAMAGE.
- * ====================================================================
- *
- * This product includes cryptographic software written by Eric Young
- * (eay@cryptsoft.com).  This product includes software written by Tim
- * Hudson (tjh@cryptsoft.com).
- *
- */
-/* X509 v3 extension utilities */
-
-
-#include <stdio.h>
-#include <ctype.h>
-#include "cryptlib.h"
-#include <openssl/conf.h>
-#include <openssl/x509v3.h>
-#include <openssl/bn.h>
-
-static char *strip_spaces(char *name);
-static int sk_strcmp(const char * const *a, const char * const *b);
-static STACK *get_email(X509_NAME *name, GENERAL_NAMES *gens);
-static void str_free(void *str);
-static int append_ia5(STACK **sk, ASN1_IA5STRING *email);
-
-static int ipv4_from_asc(unsigned char *v4, const char *in);
-static int ipv6_from_asc(unsigned char *v6, const char *in);
-static int ipv6_cb(const char *elem, int len, void *usr);
-static int ipv6_hex(unsigned char *out, const char *in, int inlen);
-
-/* Add a CONF_VALUE name value pair to stack */
-
-int X509V3_add_value(const char *name, const char *value,
-						STACK_OF(CONF_VALUE) **extlist)
-{
-	CONF_VALUE *vtmp = NULL;
-	char *tname = NULL, *tvalue = NULL;
-	if(name && !(tname = BUF_strdup(name))) goto err;
-	if(value && !(tvalue = BUF_strdup(value))) goto err;;
-	if(!(vtmp = (CONF_VALUE *)OPENSSL_malloc(sizeof(CONF_VALUE)))) goto err;
-	if(!*extlist && !(*extlist = sk_CONF_VALUE_new_null())) goto err;
-	vtmp->section = NULL;
-	vtmp->name = tname;
-	vtmp->value = tvalue;
-	if(!sk_CONF_VALUE_push(*extlist, vtmp)) goto err;
-	return 1;
-	err:
-	X509V3err(X509V3_F_X509V3_ADD_VALUE,ERR_R_MALLOC_FAILURE);
-	if(vtmp) OPENSSL_free(vtmp);
-	if(tname) OPENSSL_free(tname);
-	if(tvalue) OPENSSL_free(tvalue);
-	return 0;
-}
-
-int X509V3_add_value_uchar(const char *name, const unsigned char *value,
-			   STACK_OF(CONF_VALUE) **extlist)
-    {
-    return X509V3_add_value(name,(const char *)value,extlist);
-    }
-
-/* Free function for STACK_OF(CONF_VALUE) */
-
-void X509V3_conf_free(CONF_VALUE *conf)
-{
-	if(!conf) return;
-	if(conf->name) OPENSSL_free(conf->name);
-	if(conf->value) OPENSSL_free(conf->value);
-	if(conf->section) OPENSSL_free(conf->section);
-	OPENSSL_free(conf);
-}
-
-int X509V3_add_value_bool(const char *name, int asn1_bool,
-						STACK_OF(CONF_VALUE) **extlist)
-{
-	if(asn1_bool) return X509V3_add_value(name, "TRUE", extlist);
-	return X509V3_add_value(name, "FALSE", extlist);
-}
-
-int X509V3_add_value_bool_nf(char *name, int asn1_bool,
-						STACK_OF(CONF_VALUE) **extlist)
-{
-	if(asn1_bool) return X509V3_add_value(name, "TRUE", extlist);
-	return 1;
-}
-
-
-char *i2s_ASN1_ENUMERATED(X509V3_EXT_METHOD *method, ASN1_ENUMERATED *a)
-{
-	BIGNUM *bntmp = NULL;
-	char *strtmp = NULL;
-	if(!a) return NULL;
-	if(!(bntmp = ASN1_ENUMERATED_to_BN(a, NULL)) ||
-	    !(strtmp = BN_bn2dec(bntmp)) )
-		X509V3err(X509V3_F_I2S_ASN1_ENUMERATED,ERR_R_MALLOC_FAILURE);
-	BN_free(bntmp);
-	return strtmp;
-}
-
-char *i2s_ASN1_INTEGER(X509V3_EXT_METHOD *method, ASN1_INTEGER *a)
-{
-	BIGNUM *bntmp = NULL;
-	char *strtmp = NULL;
-	if(!a) return NULL;
-	if(!(bntmp = ASN1_INTEGER_to_BN(a, NULL)) ||
-	    !(strtmp = BN_bn2dec(bntmp)) )
-		X509V3err(X509V3_F_I2S_ASN1_INTEGER,ERR_R_MALLOC_FAILURE);
-	BN_free(bntmp);
-	return strtmp;
-}
-
-ASN1_INTEGER *s2i_ASN1_INTEGER(X509V3_EXT_METHOD *method, char *value)
-{
-	BIGNUM *bn = NULL;
-	ASN1_INTEGER *aint;
-	int isneg, ishex;
-	int ret;
-	if (!value) {
-		X509V3err(X509V3_F_S2I_ASN1_INTEGER,X509V3_R_INVALID_NULL_VALUE);
-		return 0;
-	}
-	bn = BN_new();
-	if (value[0] == '-') {
-		value++;
-		isneg = 1;
-	} else isneg = 0;
-
-	if (value[0] == '0' && ((value[1] == 'x') || (value[1] == 'X'))) {
-		value += 2;
-		ishex = 1;
-	} else ishex = 0;
-
-	if (ishex) ret = BN_hex2bn(&bn, value);
-	else ret = BN_dec2bn(&bn, value);
-
-	if (!ret || value[ret]) {
-		BN_free(bn);
-		X509V3err(X509V3_F_S2I_ASN1_INTEGER,X509V3_R_BN_DEC2BN_ERROR);
-		return 0;
-	}
-
-	if (isneg && BN_is_zero(bn)) isneg = 0;
-
-	aint = BN_to_ASN1_INTEGER(bn, NULL);
-	BN_free(bn);
-	if (!aint) {
-		X509V3err(X509V3_F_S2I_ASN1_INTEGER,X509V3_R_BN_TO_ASN1_INTEGER_ERROR);
-		return 0;
-	}
-	if (isneg) aint->type |= V_ASN1_NEG;
-	return aint;
-}
-
-int X509V3_add_value_int(const char *name, ASN1_INTEGER *aint,
-	     STACK_OF(CONF_VALUE) **extlist)
-{
-	char *strtmp;
-	int ret;
-	if(!aint) return 1;
-	if(!(strtmp = i2s_ASN1_INTEGER(NULL, aint))) return 0;
-	ret = X509V3_add_value(name, strtmp, extlist);
-	OPENSSL_free(strtmp);
-	return ret;
-}
-
-int X509V3_get_value_bool(CONF_VALUE *value, int *asn1_bool)
-{
-	char *btmp;
-	if(!(btmp = value->value)) goto err;
-	if(!strcmp(btmp, "TRUE") || !strcmp(btmp, "true")
-		 || !strcmp(btmp, "Y") || !strcmp(btmp, "y")
-		|| !strcmp(btmp, "YES") || !strcmp(btmp, "yes")) {
-		*asn1_bool = 0xff;
-		return 1;
-	} else if(!strcmp(btmp, "FALSE") || !strcmp(btmp, "false")
-		 || !strcmp(btmp, "N") || !strcmp(btmp, "n")
-		|| !strcmp(btmp, "NO") || !strcmp(btmp, "no")) {
-		*asn1_bool = 0;
-		return 1;
-	}
-	err:
-	X509V3err(X509V3_F_X509V3_GET_VALUE_BOOL,X509V3_R_INVALID_BOOLEAN_STRING);
-	X509V3_conf_err(value);
-	return 0;
-}
-
-int X509V3_get_value_int(CONF_VALUE *value, ASN1_INTEGER **aint)
-{
-	ASN1_INTEGER *itmp;
-	if(!(itmp = s2i_ASN1_INTEGER(NULL, value->value))) {
-		X509V3_conf_err(value);
-		return 0;
-	}
-	*aint = itmp;
-	return 1;
-}
-
-#define HDR_NAME	1
-#define HDR_VALUE	2
-
-/*#define DEBUG*/
-
-STACK_OF(CONF_VALUE) *X509V3_parse_list(const char *line)
-{
-	char *p, *q, c;
-	char *ntmp, *vtmp;
-	STACK_OF(CONF_VALUE) *values = NULL;
-	char *linebuf;
-	int state;
-	/* We are going to modify the line so copy it first */
-	linebuf = BUF_strdup(line);
-	state = HDR_NAME;
-	ntmp = NULL;
-	/* Go through all characters */
-	for(p = linebuf, q = linebuf; (c = *p) && (c!='\r') && (c!='\n'); p++) {
-
-		switch(state) {
-			case HDR_NAME:
-			if(c == ':') {
-				state = HDR_VALUE;
-				*p = 0;
-				ntmp = strip_spaces(q);
-				if(!ntmp) {
-					X509V3err(X509V3_F_X509V3_PARSE_LIST, X509V3_R_INVALID_NULL_NAME);
-					goto err;
-				}
-				q = p + 1;
-			} else if(c == ',') {
-				*p = 0;
-				ntmp = strip_spaces(q);
-				q = p + 1;
-#if 0
-				printf("%s\n", ntmp);
-#endif
-				if(!ntmp) {
-					X509V3err(X509V3_F_X509V3_PARSE_LIST, X509V3_R_INVALID_NULL_NAME);
-					goto err;
-				}
-				X509V3_add_value(ntmp, NULL, &values);
-			}
-			break ;
-
-			case HDR_VALUE:
-			if(c == ',') {
-				state = HDR_NAME;
-				*p = 0;
-				vtmp = strip_spaces(q);
-#if 0
-				printf("%s\n", ntmp);
-#endif
-				if(!vtmp) {
-					X509V3err(X509V3_F_X509V3_PARSE_LIST, X509V3_R_INVALID_NULL_VALUE);
-					goto err;
-				}
-				X509V3_add_value(ntmp, vtmp, &values);
-				ntmp = NULL;
-				q = p + 1;
-			}
-
-		}
-	}
-
-	if(state == HDR_VALUE) {
-		vtmp = strip_spaces(q);
-#if 0
-		printf("%s=%s\n", ntmp, vtmp);
-#endif
-		if(!vtmp) {
-			X509V3err(X509V3_F_X509V3_PARSE_LIST, X509V3_R_INVALID_NULL_VALUE);
-			goto err;
-		}
-		X509V3_add_value(ntmp, vtmp, &values);
-	} else {
-		ntmp = strip_spaces(q);
-#if 0
-		printf("%s\n", ntmp);
-#endif
-		if(!ntmp) {
-			X509V3err(X509V3_F_X509V3_PARSE_LIST, X509V3_R_INVALID_NULL_NAME);
-			goto err;
-		}
-		X509V3_add_value(ntmp, NULL, &values);
-	}
-OPENSSL_free(linebuf);
-return values;
-
-err:
-OPENSSL_free(linebuf);
-sk_CONF_VALUE_pop_free(values, X509V3_conf_free);
-return NULL;
-
-}
-
-/* Delete leading and trailing spaces from a string */
-static char *strip_spaces(char *name)
-{
-	char *p, *q;
-	/* Skip over leading spaces */
-	p = name;
-	while(*p && isspace((unsigned char)*p)) p++;
-	if(!*p) return NULL;
-	q = p + strlen(p) - 1;
-	while((q != p) && isspace((unsigned char)*q)) q--;
-	if(p != q) q[1] = 0;
-	if(!*p) return NULL;
-	return p;
-}
-
-/* hex string utilities */
-
-/* Given a buffer of length 'len' return a OPENSSL_malloc'ed string with its
- * hex representation
- * @@@ (Contents of buffer are always kept in ASCII, also on EBCDIC machines)
- */
-
-char *hex_to_string(unsigned char *buffer, long len)
-{
-	char *tmp, *q;
-	unsigned char *p;
-	int i;
-	const static char hexdig[] = "0123456789ABCDEF";
-	if(!buffer || !len) return NULL;
-	if(!(tmp = OPENSSL_malloc(len * 3 + 1))) {
-		X509V3err(X509V3_F_HEX_TO_STRING,ERR_R_MALLOC_FAILURE);
-		return NULL;
-	}
-	q = tmp;
-	for(i = 0, p = buffer; i < len; i++,p++) {
-		*q++ = hexdig[(*p >> 4) & 0xf];
-		*q++ = hexdig[*p & 0xf];
-		*q++ = ':';
-	}
-	q[-1] = 0;
-#ifdef CHARSET_EBCDIC
-	ebcdic2ascii(tmp, tmp, q - tmp - 1);
-#endif
-
-	return tmp;
-}
-
-/* Give a string of hex digits convert to
- * a buffer
- */
-
-unsigned char *string_to_hex(char *str, long *len)
-{
-	unsigned char *hexbuf, *q;
-	unsigned char ch, cl, *p;
-	if(!str) {
-		X509V3err(X509V3_F_STRING_TO_HEX,X509V3_R_INVALID_NULL_ARGUMENT);
-		return NULL;
-	}
-	if(!(hexbuf = OPENSSL_malloc(strlen(str) >> 1))) goto err;
-	for(p = (unsigned char *)str, q = hexbuf; *p;) {
-		ch = *p++;
-#ifdef CHARSET_EBCDIC
-		ch = os_toebcdic[ch];
-#endif
-		if(ch == ':') continue;
-		cl = *p++;
-#ifdef CHARSET_EBCDIC
-		cl = os_toebcdic[cl];
-#endif
-		if(!cl) {
-			X509V3err(X509V3_F_STRING_TO_HEX,X509V3_R_ODD_NUMBER_OF_DIGITS);
-			OPENSSL_free(hexbuf);
-			return NULL;
-		}
-		if(isupper(ch)) ch = tolower(ch);
-		if(isupper(cl)) cl = tolower(cl);
-
-		if((ch >= '0') && (ch <= '9')) ch -= '0';
-		else if ((ch >= 'a') && (ch <= 'f')) ch -= 'a' - 10;
-		else goto badhex;
-
-		if((cl >= '0') && (cl <= '9')) cl -= '0';
-		else if ((cl >= 'a') && (cl <= 'f')) cl -= 'a' - 10;
-		else goto badhex;
-
-		*q++ = (ch << 4) | cl;
-	}
-
-	if(len) *len = q - hexbuf;
-
-	return hexbuf;
-
-	err:
-	if(hexbuf) OPENSSL_free(hexbuf);
-	X509V3err(X509V3_F_STRING_TO_HEX,ERR_R_MALLOC_FAILURE);
-	return NULL;
-
-	badhex:
-	OPENSSL_free(hexbuf);
-	X509V3err(X509V3_F_STRING_TO_HEX,X509V3_R_ILLEGAL_HEX_DIGIT);
-	return NULL;
-
-}
-
-/* V2I name comparison function: returns zero if 'name' matches
- * cmp or cmp.*
- */
-
-int name_cmp(const char *name, const char *cmp)
-{
-	int len, ret;
-	char c;
-	len = strlen(cmp);
-	if((ret = strncmp(name, cmp, len))) return ret;
-	c = name[len];
-	if(!c || (c=='.')) return 0;
-	return 1;
-}
-
-static int sk_strcmp(const char * const *a, const char * const *b)
-{
-	return strcmp(*a, *b);
-}
-
-STACK *X509_get1_email(X509 *x)
-{
-	GENERAL_NAMES *gens;
-	STACK *ret;
-	gens = X509_get_ext_d2i(x, NID_subject_alt_name, NULL, NULL);
-	ret = get_email(X509_get_subject_name(x), gens);
-	sk_GENERAL_NAME_pop_free(gens, GENERAL_NAME_free);
-	return ret;
-}
-
-STACK *X509_REQ_get1_email(X509_REQ *x)
-{
-	GENERAL_NAMES *gens;
-	STACK_OF(X509_EXTENSION) *exts;
-	STACK *ret;
-	exts = X509_REQ_get_extensions(x);
-	gens = X509V3_get_d2i(exts, NID_subject_alt_name, NULL, NULL);
-	ret = get_email(X509_REQ_get_subject_name(x), gens);
-	sk_GENERAL_NAME_pop_free(gens, GENERAL_NAME_free);
-	sk_X509_EXTENSION_pop_free(exts, X509_EXTENSION_free);
-	return ret;
-}
-
-
-static STACK *get_email(X509_NAME *name, GENERAL_NAMES *gens)
-{
-	STACK *ret = NULL;
-	X509_NAME_ENTRY *ne;
-	ASN1_IA5STRING *email;
-	GENERAL_NAME *gen;
-	int i;
-	/* Now add any email address(es) to STACK */
-	i = -1;
-	/* First supplied X509_NAME */
-	while((i = X509_NAME_get_index_by_NID(name,
-					 NID_pkcs9_emailAddress, i)) >= 0) {
-		ne = X509_NAME_get_entry(name, i);
-		email = X509_NAME_ENTRY_get_data(ne);
-		if(!append_ia5(&ret, email)) return NULL;
-	}
-	for(i = 0; i < sk_GENERAL_NAME_num(gens); i++)
-	{
-		gen = sk_GENERAL_NAME_value(gens, i);
-		if(gen->type != GEN_EMAIL) continue;
-		if(!append_ia5(&ret, gen->d.ia5)) return NULL;
-	}
-	return ret;
-}
-
-static void str_free(void *str)
-{
-	OPENSSL_free(str);
-}
-
-static int append_ia5(STACK **sk, ASN1_IA5STRING *email)
-{
-	char *emtmp;
-	/* First some sanity checks */
-	if(email->type != V_ASN1_IA5STRING) return 1;
-	if(!email->data || !email->length) return 1;
-	if(!*sk) *sk = sk_new(sk_strcmp);
-	if(!*sk) return 0;
-	/* Don't add duplicates */
-	if(sk_find(*sk, (char *)email->data) != -1) return 1;
-	emtmp = BUF_strdup((char *)email->data);
-	if(!emtmp || !sk_push(*sk, emtmp)) {
-		X509_email_free(*sk);
-		*sk = NULL;
-		return 0;
-	}
-	return 1;
-}
-
-void X509_email_free(STACK *sk)
-{
-	sk_pop_free(sk, str_free);
-}
-
-/* Convert IP addresses both IPv4 and IPv6 into an 
- * OCTET STRING compatible with RFC3280.
- */
-
-ASN1_OCTET_STRING *a2i_IPADDRESS(const char *ipasc)
-	{
-	unsigned char ipout[16];
-	ASN1_OCTET_STRING *ret;
-	int iplen;
-
-	/* If string contains a ':' assume IPv6 */
-
-	iplen = a2i_ipadd(ipout, ipasc);
-
-	if (!iplen)
-		return NULL;
-
-	ret = ASN1_OCTET_STRING_new();
-	if (!ret)
-		return NULL;
-	if (!ASN1_OCTET_STRING_set(ret, ipout, iplen))
-		{
-		ASN1_OCTET_STRING_free(ret);
-		return NULL;
-		}
-	return ret;
-	}
-
-ASN1_OCTET_STRING *a2i_IPADDRESS_NC(const char *ipasc)
-	{
-	ASN1_OCTET_STRING *ret = NULL;
-	unsigned char ipout[32];
-	char *iptmp = NULL, *p;
-	int iplen1, iplen2;
-	p = strchr(ipasc,'/');
-	if (!p)
-		return NULL;
-	iptmp = BUF_strdup(ipasc);
-	if (!iptmp)
-		return NULL;
-	p = iptmp + (p - ipasc);
-	*p++ = 0;
-
-	iplen1 = a2i_ipadd(ipout, iptmp);
-
-	if (!iplen1)
-		goto err;
-
-	iplen2 = a2i_ipadd(ipout + iplen1, p);
-
-	OPENSSL_free(iptmp);
-	iptmp = NULL;
-
-	if (!iplen2 || (iplen1 != iplen2))
-		goto err;
-
-	ret = ASN1_OCTET_STRING_new();
-	if (!ret)
-		goto err;
-	if (!ASN1_OCTET_STRING_set(ret, ipout, iplen1 + iplen2))
-		goto err;
-
-	return ret;
-
-	err:
-	if (iptmp)
-		OPENSSL_free(iptmp);
-	if (ret)
-		ASN1_OCTET_STRING_free(ret);
-	return NULL;
-	}
-	
-
-int a2i_ipadd(unsigned char *ipout, const char *ipasc)
-	{
-	/* If string contains a ':' assume IPv6 */
-
-	if (strchr(ipasc, ':'))
-		{
-		if (!ipv6_from_asc(ipout, ipasc))
-			return 0;
-		return 16;
-		}
-	else
-		{
-		if (!ipv4_from_asc(ipout, ipasc))
-			return 0;
-		return 4;
-		}
-	}
-
-static int ipv4_from_asc(unsigned char *v4, const char *in)
-	{
-	int a0, a1, a2, a3;
-	if (sscanf(in, "%d.%d.%d.%d", &a0, &a1, &a2, &a3) != 4)
-		return 0;
-	if ((a0 < 0) || (a0 > 255) || (a1 < 0) || (a1 > 255)
-		|| (a2 < 0) || (a2 > 255) || (a3 < 0) || (a3 > 255))
-		return 0;
-	v4[0] = a0;
-	v4[1] = a1;
-	v4[2] = a2;
-	v4[3] = a3;
-	return 1;
-	}
-
-typedef struct {
-		/* Temporary store for IPV6 output */
-		unsigned char tmp[16];
-		/* Total number of bytes in tmp */
-		int total;
-		/* The position of a zero (corresponding to '::') */
-		int zero_pos;
-		/* Number of zeroes */
-		int zero_cnt;
-	} IPV6_STAT;
-
-
-static int ipv6_from_asc(unsigned char *v6, const char *in)
-	{
-	IPV6_STAT v6stat;
-	v6stat.total = 0;
-	v6stat.zero_pos = -1;
-	v6stat.zero_cnt = 0;
-	/* Treat the IPv6 representation as a list of values
-	 * separated by ':'. The presence of a '::' will parse
- 	 * as one, two or three zero length elements.
-	 */
-	if (!CONF_parse_list(in, ':', 0, ipv6_cb, &v6stat))
-		return 0;
-
-	/* Now for some sanity checks */
-
-	if (v6stat.zero_pos == -1)
-		{
-		/* If no '::' must have exactly 16 bytes */
-		if (v6stat.total != 16)
-			return 0;
-		}
-	else 
-		{
-		/* If '::' must have less than 16 bytes */
-		if (v6stat.total == 16)
-			return 0;
-		/* More than three zeroes is an error */
-		if (v6stat.zero_cnt > 3)
-			return 0;
-		/* Can only have three zeroes if nothing else present */
-		else if (v6stat.zero_cnt == 3)
-			{
-			if (v6stat.total > 0)
-				return 0;
-			}
-		/* Can only have two zeroes if at start or end */
-		else if (v6stat.zero_cnt == 2)
-			{
-			if ((v6stat.zero_pos != 0)
-				&& (v6stat.zero_pos != v6stat.total))
-				return 0;
-			}
-		else 
-		/* Can only have one zero if *not* start or end */
-			{
-			if ((v6stat.zero_pos == 0)
-				|| (v6stat.zero_pos == v6stat.total))
-				return 0;
-			}
-		}
-
-	/* Format result */
-
-	/* Copy initial part */
-	if (v6stat.zero_pos > 0)
-		memcpy(v6, v6stat.tmp, v6stat.zero_pos);
-	/* Zero middle */
-	if (v6stat.total != 16)
-		memset(v6 + v6stat.zero_pos, 0, 16 - v6stat.total);
-	/* Copy final part */
-	if (v6stat.total != v6stat.zero_pos)
-		memcpy(v6 + v6stat.zero_pos + 16 - v6stat.total,
-			v6stat.tmp + v6stat.zero_pos,
-			v6stat.total - v6stat.zero_pos);
-
-	return 1;
-	}
-
-static int ipv6_cb(const char *elem, int len, void *usr)
-	{
-	IPV6_STAT *s = usr;
-	/* Error if 16 bytes written */
-	if (s->total == 16)
-		return 0;
-	if (len == 0)
-		{
-		/* Zero length element, corresponds to '::' */
-		if (s->zero_pos == -1)
-			s->zero_pos = s->total;
-		/* If we've already got a :: its an error */
-		else if (s->zero_pos != s->total)
-			return 0;
-		s->zero_cnt++;
-		}
-	else 
-		{
-		/* If more than 4 characters could be final a.b.c.d form */
-		if (len > 4)
-			{
-			/* Need at least 4 bytes left */
-			if (s->total > 12)
-				return 0;
-			/* Must be end of string */
-			if (elem[len])
-				return 0;
-			if (!ipv4_from_asc(s->tmp + s->total, elem))
-				return 0;
-			s->total += 4;
-			}
-		else
-			{
-			if (!ipv6_hex(s->tmp + s->total, elem, len))
-				return 0;
-			s->total += 2;
-			}
-		}
-	return 1;
-	}
-
-/* Convert a string of up to 4 hex digits into the corresponding
- * IPv6 form.
- */
-
-static int ipv6_hex(unsigned char *out, const char *in, int inlen)
-	{
-	unsigned char c;
-	unsigned int num = 0;
-	if (inlen > 4)
-		return 0;
-	while(inlen--)
-		{
-		c = *in++;
-		num <<= 4;
-		if ((c >= '0') && (c <= '9'))
-			num |= c - '0';
-		else if ((c >= 'A') && (c <= 'F'))
-			num |= c - 'A' + 10;
-		else if ((c >= 'a') && (c <= 'f'))
-			num |=  c - 'a' + 10;
-		else
-			return 0;
-		}
-	out[0] = num >> 8;
-	out[1] = num & 0xff;
-	return 1;
-	}
-
-
-int X509V3_NAME_from_section(X509_NAME *nm, STACK_OF(CONF_VALUE)*dn_sk,
-						unsigned long chtype)
-	{
-	CONF_VALUE *v;
-	int i, mval;
-	char *p, *type;
-	if (!nm)
-		return 0;
-
-	for (i = 0; i < sk_CONF_VALUE_num(dn_sk); i++)
-		{
-		v=sk_CONF_VALUE_value(dn_sk,i);
-		type=v->name;
-		/* Skip past any leading X. X: X, etc to allow for
-		 * multiple instances 
-		 */
-		for(p = type; *p ; p++) 
-#ifndef CHARSET_EBCDIC
-			if ((*p == ':') || (*p == ',') || (*p == '.'))
-#else
-			if ((*p == os_toascii[':']) || (*p == os_toascii[',']) || (*p == os_toascii['.']))
-#endif
-				{
-				p++;
-				if(*p) type = p;
-				break;
-				}
-#ifndef CHARSET_EBCDIC
-		if (*type == '+')
-#else
-		if (*type == os_toascii['+'])
-#endif
-			{
-			mval = -1;
-			type++;
-			}
-		else
-			mval = 0;
-		if (!X509_NAME_add_entry_by_txt(nm,type, chtype,
-				(unsigned char *) v->value,-1,-1,mval))
-					return 0;
-
-		}
-	return 1;
-	}
diff --git a/crypto/openssl/crypto/x509v3/v3conf.c b/crypto/openssl/crypto/x509v3/v3conf.c
deleted file mode 100644
index 00cf5b4a5b2e..000000000000
--- a/crypto/openssl/crypto/x509v3/v3conf.c
+++ /dev/null
@@ -1,127 +0,0 @@
-/* v3conf.c */
-/* Written by Dr Stephen N Henson (shenson@bigfoot.com) for the OpenSSL
- * project 1999.
- */
-/* ====================================================================
- * Copyright (c) 1999 The OpenSSL Project.  All rights reserved.
- *
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions
- * are met:
- *
- * 1. Redistributions of source code must retain the above copyright
- *    notice, this list of conditions and the following disclaimer. 
- *
- * 2. Redistributions in binary form must reproduce the above copyright
- *    notice, this list of conditions and the following disclaimer in
- *    the documentation and/or other materials provided with the
- *    distribution.
- *
- * 3. All advertising materials mentioning features or use of this
- *    software must display the following acknowledgment:
- *    "This product includes software developed by the OpenSSL Project
- *    for use in the OpenSSL Toolkit. (http://www.OpenSSL.org/)"
- *
- * 4. The names "OpenSSL Toolkit" and "OpenSSL Project" must not be used to
- *    endorse or promote products derived from this software without
- *    prior written permission. For written permission, please contact
- *    licensing@OpenSSL.org.
- *
- * 5. Products derived from this software may not be called "OpenSSL"
- *    nor may "OpenSSL" appear in their names without prior written
- *    permission of the OpenSSL Project.
- *
- * 6. Redistributions of any form whatsoever must retain the following
- *    acknowledgment:
- *    "This product includes software developed by the OpenSSL Project
- *    for use in the OpenSSL Toolkit (http://www.OpenSSL.org/)"
- *
- * THIS SOFTWARE IS PROVIDED BY THE OpenSSL PROJECT ``AS IS'' AND ANY
- * EXPRESSED OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
- * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR
- * PURPOSE ARE DISCLAIMED.  IN NO EVENT SHALL THE OpenSSL PROJECT OR
- * ITS CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
- * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
- * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
- * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
- * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
- * STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
- * ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED
- * OF THE POSSIBILITY OF SUCH DAMAGE.
- * ====================================================================
- *
- * This product includes cryptographic software written by Eric Young
- * (eay@cryptsoft.com).  This product includes software written by Tim
- * Hudson (tjh@cryptsoft.com).
- *
- */
-
-
-#include <stdio.h>
-#include "cryptlib.h"
-#include <openssl/asn1.h>
-#include <openssl/conf.h>
-#include <openssl/x509.h>
-#include <openssl/x509v3.h>
-
-/* Test application to add extensions from a config file */
-
-int main(int argc, char **argv)
-{
-	LHASH *conf;
-	X509 *cert;
-	FILE *inf;
-	char *conf_file;
-	int i;
-	int count;
-	X509_EXTENSION *ext;
-	X509V3_add_standard_extensions();
-	ERR_load_crypto_strings();
-	if(!argv[1]) {
-		fprintf(stderr, "Usage: v3conf cert.pem [file.cnf]\n");
-		exit(1);
-	}
-	conf_file = argv[2];
-	if(!conf_file) conf_file = "test.cnf";
-	conf = CONF_load(NULL, "test.cnf", NULL);
-	if(!conf) {
-		fprintf(stderr, "Error opening Config file %s\n", conf_file);
-		ERR_print_errors_fp(stderr);
-		exit(1);
-	}
-
-	inf = fopen(argv[1], "r");
-	if(!inf) {
-		fprintf(stderr, "Can't open certificate file %s\n", argv[1]);
-		exit(1);
-	}
-	cert = PEM_read_X509(inf, NULL, NULL);
-	if(!cert) {
-		fprintf(stderr, "Error reading certificate file %s\n", argv[1]);
-		exit(1);
-	}
-	fclose(inf);
-
-	sk_pop_free(cert->cert_info->extensions, X509_EXTENSION_free);
-	cert->cert_info->extensions = NULL;
-
-	if(!X509V3_EXT_add_conf(conf, NULL, "test_section", cert)) {
-		fprintf(stderr, "Error adding extensions\n");
-		ERR_print_errors_fp(stderr);
-		exit(1);
-	}
-
-	count = X509_get_ext_count(cert);
-	printf("%d extensions\n", count);
-	for(i = 0; i < count; i++) {
-		ext = X509_get_ext(cert, i);
-		printf("%s", OBJ_nid2ln(OBJ_obj2nid(ext->object)));
-		if(ext->critical) printf(",critical:\n");
-		else printf(":\n");
-		X509V3_EXT_print_fp(stdout, ext, 0, 0);
-		printf("\n");
-		
-	}
-	return 0;
-}
-
diff --git a/crypto/openssl/crypto/x509v3/v3err.c b/crypto/openssl/crypto/x509v3/v3err.c
deleted file mode 100644
index d538ad8b805c..000000000000
--- a/crypto/openssl/crypto/x509v3/v3err.c
+++ /dev/null
@@ -1,219 +0,0 @@
-/* crypto/x509v3/v3err.c */
-/* ====================================================================
- * Copyright (c) 1999-2005 The OpenSSL Project.  All rights reserved.
- *
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions
- * are met:
- *
- * 1. Redistributions of source code must retain the above copyright
- *    notice, this list of conditions and the following disclaimer. 
- *
- * 2. Redistributions in binary form must reproduce the above copyright
- *    notice, this list of conditions and the following disclaimer in
- *    the documentation and/or other materials provided with the
- *    distribution.
- *
- * 3. All advertising materials mentioning features or use of this
- *    software must display the following acknowledgment:
- *    "This product includes software developed by the OpenSSL Project
- *    for use in the OpenSSL Toolkit. (http://www.OpenSSL.org/)"
- *
- * 4. The names "OpenSSL Toolkit" and "OpenSSL Project" must not be used to
- *    endorse or promote products derived from this software without
- *    prior written permission. For written permission, please contact
- *    openssl-core@OpenSSL.org.
- *
- * 5. Products derived from this software may not be called "OpenSSL"
- *    nor may "OpenSSL" appear in their names without prior written
- *    permission of the OpenSSL Project.
- *
- * 6. Redistributions of any form whatsoever must retain the following
- *    acknowledgment:
- *    "This product includes software developed by the OpenSSL Project
- *    for use in the OpenSSL Toolkit (http://www.OpenSSL.org/)"
- *
- * THIS SOFTWARE IS PROVIDED BY THE OpenSSL PROJECT ``AS IS'' AND ANY
- * EXPRESSED OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
- * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR
- * PURPOSE ARE DISCLAIMED.  IN NO EVENT SHALL THE OpenSSL PROJECT OR
- * ITS CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
- * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
- * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
- * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
- * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
- * STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
- * ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED
- * OF THE POSSIBILITY OF SUCH DAMAGE.
- * ====================================================================
- *
- * This product includes cryptographic software written by Eric Young
- * (eay@cryptsoft.com).  This product includes software written by Tim
- * Hudson (tjh@cryptsoft.com).
- *
- */
-
-/* NOTE: this file was auto generated by the mkerr.pl script: any changes
- * made to it will be overwritten when the script next updates this file,
- * only reason strings will be preserved.
- */
-
-#include <stdio.h>
-#include <openssl/err.h>
-#include <openssl/x509v3.h>
-
-/* BEGIN ERROR CODES */
-#ifndef OPENSSL_NO_ERR
-
-#define ERR_FUNC(func) ERR_PACK(ERR_LIB_X509V3,func,0)
-#define ERR_REASON(reason) ERR_PACK(ERR_LIB_X509V3,0,reason)
-
-static ERR_STRING_DATA X509V3_str_functs[]=
-	{
-{ERR_FUNC(X509V3_F_ASIDENTIFIERCHOICE_CANONIZE),	"ASIDENTIFIERCHOICE_CANONIZE"},
-{ERR_FUNC(X509V3_F_ASIDENTIFIERCHOICE_IS_CANONICAL),	"ASIDENTIFIERCHOICE_IS_CANONICAL"},
-{ERR_FUNC(X509V3_F_COPY_EMAIL),	"COPY_EMAIL"},
-{ERR_FUNC(X509V3_F_COPY_ISSUER),	"COPY_ISSUER"},
-{ERR_FUNC(X509V3_F_DO_DIRNAME),	"DO_DIRNAME"},
-{ERR_FUNC(X509V3_F_DO_EXT_CONF),	"DO_EXT_CONF"},
-{ERR_FUNC(X509V3_F_DO_EXT_I2D),	"DO_EXT_I2D"},
-{ERR_FUNC(X509V3_F_DO_EXT_NCONF),	"DO_EXT_NCONF"},
-{ERR_FUNC(X509V3_F_DO_I2V_NAME_CONSTRAINTS),	"DO_I2V_NAME_CONSTRAINTS"},
-{ERR_FUNC(X509V3_F_HEX_TO_STRING),	"hex_to_string"},
-{ERR_FUNC(X509V3_F_I2S_ASN1_ENUMERATED),	"i2s_ASN1_ENUMERATED"},
-{ERR_FUNC(X509V3_F_I2S_ASN1_IA5STRING),	"I2S_ASN1_IA5STRING"},
-{ERR_FUNC(X509V3_F_I2S_ASN1_INTEGER),	"i2s_ASN1_INTEGER"},
-{ERR_FUNC(X509V3_F_I2V_AUTHORITY_INFO_ACCESS),	"I2V_AUTHORITY_INFO_ACCESS"},
-{ERR_FUNC(X509V3_F_NOTICE_SECTION),	"NOTICE_SECTION"},
-{ERR_FUNC(X509V3_F_NREF_NOS),	"NREF_NOS"},
-{ERR_FUNC(X509V3_F_POLICY_SECTION),	"POLICY_SECTION"},
-{ERR_FUNC(X509V3_F_PROCESS_PCI_VALUE),	"PROCESS_PCI_VALUE"},
-{ERR_FUNC(X509V3_F_R2I_CERTPOL),	"R2I_CERTPOL"},
-{ERR_FUNC(X509V3_F_R2I_PCI),	"R2I_PCI"},
-{ERR_FUNC(X509V3_F_S2I_ASN1_IA5STRING),	"S2I_ASN1_IA5STRING"},
-{ERR_FUNC(X509V3_F_S2I_ASN1_INTEGER),	"s2i_ASN1_INTEGER"},
-{ERR_FUNC(X509V3_F_S2I_ASN1_OCTET_STRING),	"s2i_ASN1_OCTET_STRING"},
-{ERR_FUNC(X509V3_F_S2I_ASN1_SKEY_ID),	"S2I_ASN1_SKEY_ID"},
-{ERR_FUNC(X509V3_F_S2I_SKEY_ID),	"S2I_SKEY_ID"},
-{ERR_FUNC(X509V3_F_STRING_TO_HEX),	"string_to_hex"},
-{ERR_FUNC(X509V3_F_SXNET_ADD_ID_ASC),	"SXNET_add_id_asc"},
-{ERR_FUNC(X509V3_F_SXNET_ADD_ID_INTEGER),	"SXNET_add_id_INTEGER"},
-{ERR_FUNC(X509V3_F_SXNET_ADD_ID_ULONG),	"SXNET_add_id_ulong"},
-{ERR_FUNC(X509V3_F_SXNET_GET_ID_ASC),	"SXNET_get_id_asc"},
-{ERR_FUNC(X509V3_F_SXNET_GET_ID_ULONG),	"SXNET_get_id_ulong"},
-{ERR_FUNC(X509V3_F_V2I_ASIDENTIFIERS),	"V2I_ASIDENTIFIERS"},
-{ERR_FUNC(X509V3_F_V2I_ASN1_BIT_STRING),	"v2i_ASN1_BIT_STRING"},
-{ERR_FUNC(X509V3_F_V2I_AUTHORITY_INFO_ACCESS),	"V2I_AUTHORITY_INFO_ACCESS"},
-{ERR_FUNC(X509V3_F_V2I_AUTHORITY_KEYID),	"V2I_AUTHORITY_KEYID"},
-{ERR_FUNC(X509V3_F_V2I_BASIC_CONSTRAINTS),	"V2I_BASIC_CONSTRAINTS"},
-{ERR_FUNC(X509V3_F_V2I_CRLD),	"V2I_CRLD"},
-{ERR_FUNC(X509V3_F_V2I_EXTENDED_KEY_USAGE),	"V2I_EXTENDED_KEY_USAGE"},
-{ERR_FUNC(X509V3_F_V2I_GENERAL_NAMES),	"v2i_GENERAL_NAMES"},
-{ERR_FUNC(X509V3_F_V2I_GENERAL_NAME_EX),	"v2i_GENERAL_NAME_ex"},
-{ERR_FUNC(X509V3_F_V2I_IPADDRBLOCKS),	"V2I_IPADDRBLOCKS"},
-{ERR_FUNC(X509V3_F_V2I_ISSUER_ALT),	"V2I_ISSUER_ALT"},
-{ERR_FUNC(X509V3_F_V2I_NAME_CONSTRAINTS),	"V2I_NAME_CONSTRAINTS"},
-{ERR_FUNC(X509V3_F_V2I_POLICY_CONSTRAINTS),	"V2I_POLICY_CONSTRAINTS"},
-{ERR_FUNC(X509V3_F_V2I_POLICY_MAPPINGS),	"V2I_POLICY_MAPPINGS"},
-{ERR_FUNC(X509V3_F_V2I_SUBJECT_ALT),	"V2I_SUBJECT_ALT"},
-{ERR_FUNC(X509V3_F_V3_ADDR_VALIDATE_PATH_INTERNAL),	"V3_ADDR_VALIDATE_PATH_INTERNAL"},
-{ERR_FUNC(X509V3_F_V3_GENERIC_EXTENSION),	"V3_GENERIC_EXTENSION"},
-{ERR_FUNC(X509V3_F_X509V3_ADD1_I2D),	"X509V3_add1_i2d"},
-{ERR_FUNC(X509V3_F_X509V3_ADD_VALUE),	"X509V3_add_value"},
-{ERR_FUNC(X509V3_F_X509V3_EXT_ADD),	"X509V3_EXT_add"},
-{ERR_FUNC(X509V3_F_X509V3_EXT_ADD_ALIAS),	"X509V3_EXT_add_alias"},
-{ERR_FUNC(X509V3_F_X509V3_EXT_CONF),	"X509V3_EXT_conf"},
-{ERR_FUNC(X509V3_F_X509V3_EXT_I2D),	"X509V3_EXT_i2d"},
-{ERR_FUNC(X509V3_F_X509V3_EXT_NCONF),	"X509V3_EXT_nconf"},
-{ERR_FUNC(X509V3_F_X509V3_GET_SECTION),	"X509V3_get_section"},
-{ERR_FUNC(X509V3_F_X509V3_GET_STRING),	"X509V3_get_string"},
-{ERR_FUNC(X509V3_F_X509V3_GET_VALUE_BOOL),	"X509V3_get_value_bool"},
-{ERR_FUNC(X509V3_F_X509V3_PARSE_LIST),	"X509V3_parse_list"},
-{ERR_FUNC(X509V3_F_X509_PURPOSE_ADD),	"X509_PURPOSE_add"},
-{ERR_FUNC(X509V3_F_X509_PURPOSE_SET),	"X509_PURPOSE_set"},
-{0,NULL}
-	};
-
-static ERR_STRING_DATA X509V3_str_reasons[]=
-	{
-{ERR_REASON(X509V3_R_BAD_IP_ADDRESS)     ,"bad ip address"},
-{ERR_REASON(X509V3_R_BAD_OBJECT)         ,"bad object"},
-{ERR_REASON(X509V3_R_BN_DEC2BN_ERROR)    ,"bn dec2bn error"},
-{ERR_REASON(X509V3_R_BN_TO_ASN1_INTEGER_ERROR),"bn to asn1 integer error"},
-{ERR_REASON(X509V3_R_DIRNAME_ERROR)      ,"dirname error"},
-{ERR_REASON(X509V3_R_DUPLICATE_ZONE_ID)  ,"duplicate zone id"},
-{ERR_REASON(X509V3_R_ERROR_CONVERTING_ZONE),"error converting zone"},
-{ERR_REASON(X509V3_R_ERROR_CREATING_EXTENSION),"error creating extension"},
-{ERR_REASON(X509V3_R_ERROR_IN_EXTENSION) ,"error in extension"},
-{ERR_REASON(X509V3_R_EXPECTED_A_SECTION_NAME),"expected a section name"},
-{ERR_REASON(X509V3_R_EXTENSION_EXISTS)   ,"extension exists"},
-{ERR_REASON(X509V3_R_EXTENSION_NAME_ERROR),"extension name error"},
-{ERR_REASON(X509V3_R_EXTENSION_NOT_FOUND),"extension not found"},
-{ERR_REASON(X509V3_R_EXTENSION_SETTING_NOT_SUPPORTED),"extension setting not supported"},
-{ERR_REASON(X509V3_R_EXTENSION_VALUE_ERROR),"extension value error"},
-{ERR_REASON(X509V3_R_ILLEGAL_EMPTY_EXTENSION),"illegal empty extension"},
-{ERR_REASON(X509V3_R_ILLEGAL_HEX_DIGIT)  ,"illegal hex digit"},
-{ERR_REASON(X509V3_R_INCORRECT_POLICY_SYNTAX_TAG),"incorrect policy syntax tag"},
-{ERR_REASON(X509V3_R_INVALID_ASNUMBER)   ,"invalid asnumber"},
-{ERR_REASON(X509V3_R_INVALID_ASRANGE)    ,"invalid asrange"},
-{ERR_REASON(X509V3_R_INVALID_BOOLEAN_STRING),"invalid boolean string"},
-{ERR_REASON(X509V3_R_INVALID_EXTENSION_STRING),"invalid extension string"},
-{ERR_REASON(X509V3_R_INVALID_INHERITANCE),"invalid inheritance"},
-{ERR_REASON(X509V3_R_INVALID_IPADDRESS)  ,"invalid ipaddress"},
-{ERR_REASON(X509V3_R_INVALID_NAME)       ,"invalid name"},
-{ERR_REASON(X509V3_R_INVALID_NULL_ARGUMENT),"invalid null argument"},
-{ERR_REASON(X509V3_R_INVALID_NULL_NAME)  ,"invalid null name"},
-{ERR_REASON(X509V3_R_INVALID_NULL_VALUE) ,"invalid null value"},
-{ERR_REASON(X509V3_R_INVALID_NUMBER)     ,"invalid number"},
-{ERR_REASON(X509V3_R_INVALID_NUMBERS)    ,"invalid numbers"},
-{ERR_REASON(X509V3_R_INVALID_OBJECT_IDENTIFIER),"invalid object identifier"},
-{ERR_REASON(X509V3_R_INVALID_OPTION)     ,"invalid option"},
-{ERR_REASON(X509V3_R_INVALID_POLICY_IDENTIFIER),"invalid policy identifier"},
-{ERR_REASON(X509V3_R_INVALID_PROXY_POLICY_SETTING),"invalid proxy policy setting"},
-{ERR_REASON(X509V3_R_INVALID_PURPOSE)    ,"invalid purpose"},
-{ERR_REASON(X509V3_R_INVALID_SAFI)       ,"invalid safi"},
-{ERR_REASON(X509V3_R_INVALID_SECTION)    ,"invalid section"},
-{ERR_REASON(X509V3_R_INVALID_SYNTAX)     ,"invalid syntax"},
-{ERR_REASON(X509V3_R_ISSUER_DECODE_ERROR),"issuer decode error"},
-{ERR_REASON(X509V3_R_MISSING_VALUE)      ,"missing value"},
-{ERR_REASON(X509V3_R_NEED_ORGANIZATION_AND_NUMBERS),"need organization and numbers"},
-{ERR_REASON(X509V3_R_NO_CONFIG_DATABASE) ,"no config database"},
-{ERR_REASON(X509V3_R_NO_ISSUER_CERTIFICATE),"no issuer certificate"},
-{ERR_REASON(X509V3_R_NO_ISSUER_DETAILS)  ,"no issuer details"},
-{ERR_REASON(X509V3_R_NO_POLICY_IDENTIFIER),"no policy identifier"},
-{ERR_REASON(X509V3_R_NO_PROXY_CERT_POLICY_LANGUAGE_DEFINED),"no proxy cert policy language defined"},
-{ERR_REASON(X509V3_R_NO_PUBLIC_KEY)      ,"no public key"},
-{ERR_REASON(X509V3_R_NO_SUBJECT_DETAILS) ,"no subject details"},
-{ERR_REASON(X509V3_R_ODD_NUMBER_OF_DIGITS),"odd number of digits"},
-{ERR_REASON(X509V3_R_OPERATION_NOT_DEFINED),"operation not defined"},
-{ERR_REASON(X509V3_R_OTHERNAME_ERROR)    ,"othername error"},
-{ERR_REASON(X509V3_R_POLICY_LANGUAGE_ALREADTY_DEFINED),"policy language alreadty defined"},
-{ERR_REASON(X509V3_R_POLICY_PATH_LENGTH) ,"policy path length"},
-{ERR_REASON(X509V3_R_POLICY_PATH_LENGTH_ALREADTY_DEFINED),"policy path length alreadty defined"},
-{ERR_REASON(X509V3_R_POLICY_SYNTAX_NOT_CURRENTLY_SUPPORTED),"policy syntax not currently supported"},
-{ERR_REASON(X509V3_R_POLICY_WHEN_PROXY_LANGUAGE_REQUIRES_NO_POLICY),"policy when proxy language requires no policy"},
-{ERR_REASON(X509V3_R_SECTION_NOT_FOUND)  ,"section not found"},
-{ERR_REASON(X509V3_R_UNABLE_TO_GET_ISSUER_DETAILS),"unable to get issuer details"},
-{ERR_REASON(X509V3_R_UNABLE_TO_GET_ISSUER_KEYID),"unable to get issuer keyid"},
-{ERR_REASON(X509V3_R_UNKNOWN_BIT_STRING_ARGUMENT),"unknown bit string argument"},
-{ERR_REASON(X509V3_R_UNKNOWN_EXTENSION)  ,"unknown extension"},
-{ERR_REASON(X509V3_R_UNKNOWN_EXTENSION_NAME),"unknown extension name"},
-{ERR_REASON(X509V3_R_UNKNOWN_OPTION)     ,"unknown option"},
-{ERR_REASON(X509V3_R_UNSUPPORTED_OPTION) ,"unsupported option"},
-{ERR_REASON(X509V3_R_USER_TOO_LONG)      ,"user too long"},
-{0,NULL}
-	};
-
-#endif
-
-void ERR_load_X509V3_strings(void)
-	{
-#ifndef OPENSSL_NO_ERR
-
-	if (ERR_func_error_string(X509V3_str_functs[0].error) == NULL)
-		{
-		ERR_load_strings(0,X509V3_str_functs);
-		ERR_load_strings(0,X509V3_str_reasons);
-		}
-#endif
-	}
diff --git a/crypto/openssl/crypto/x509v3/v3prin.c b/crypto/openssl/crypto/x509v3/v3prin.c
deleted file mode 100644
index b529814319b1..000000000000
--- a/crypto/openssl/crypto/x509v3/v3prin.c
+++ /dev/null
@@ -1,99 +0,0 @@
-/* v3prin.c */
-/* Written by Dr Stephen N Henson (shenson@bigfoot.com) for the OpenSSL
- * project 1999.
- */
-/* ====================================================================
- * Copyright (c) 1999 The OpenSSL Project.  All rights reserved.
- *
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions
- * are met:
- *
- * 1. Redistributions of source code must retain the above copyright
- *    notice, this list of conditions and the following disclaimer. 
- *
- * 2. Redistributions in binary form must reproduce the above copyright
- *    notice, this list of conditions and the following disclaimer in
- *    the documentation and/or other materials provided with the
- *    distribution.
- *
- * 3. All advertising materials mentioning features or use of this
- *    software must display the following acknowledgment:
- *    "This product includes software developed by the OpenSSL Project
- *    for use in the OpenSSL Toolkit. (http://www.OpenSSL.org/)"
- *
- * 4. The names "OpenSSL Toolkit" and "OpenSSL Project" must not be used to
- *    endorse or promote products derived from this software without
- *    prior written permission. For written permission, please contact
- *    licensing@OpenSSL.org.
- *
- * 5. Products derived from this software may not be called "OpenSSL"
- *    nor may "OpenSSL" appear in their names without prior written
- *    permission of the OpenSSL Project.
- *
- * 6. Redistributions of any form whatsoever must retain the following
- *    acknowledgment:
- *    "This product includes software developed by the OpenSSL Project
- *    for use in the OpenSSL Toolkit (http://www.OpenSSL.org/)"
- *
- * THIS SOFTWARE IS PROVIDED BY THE OpenSSL PROJECT ``AS IS'' AND ANY
- * EXPRESSED OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
- * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR
- * PURPOSE ARE DISCLAIMED.  IN NO EVENT SHALL THE OpenSSL PROJECT OR
- * ITS CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
- * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
- * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
- * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
- * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
- * STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
- * ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED
- * OF THE POSSIBILITY OF SUCH DAMAGE.
- * ====================================================================
- *
- * This product includes cryptographic software written by Eric Young
- * (eay@cryptsoft.com).  This product includes software written by Tim
- * Hudson (tjh@cryptsoft.com).
- *
- */
-
-
-
-#include <stdio.h>
-#include <openssl/asn1.h>
-#include <openssl/conf.h>
-#include <openssl/x509.h>
-#include <openssl/x509v3.h>
-
-int main(int argc, char **argv)
-{
-	X509 *cert;
-	FILE *inf;
-	int i, count;
-	X509_EXTENSION *ext;
-	X509V3_add_standard_extensions();
-	ERR_load_crypto_strings();
-	if(!argv[1]) {
-		fprintf(stderr, "Usage v3prin cert.pem\n");
-		exit(1);
-	}
-	if(!(inf = fopen(argv[1], "r"))) {
-		fprintf(stderr, "Can't open %s\n", argv[1]);
-		exit(1);
-	}
-	if(!(cert = PEM_read_X509(inf, NULL, NULL))) {
-		fprintf(stderr, "Can't read certificate %s\n", argv[1]);
-		ERR_print_errors_fp(stderr);
-		exit(1);
-	}
-	fclose(inf);
-	count = X509_get_ext_count(cert);
-	printf("%d extensions\n", count);
-	for(i = 0; i < count; i++) {
-		ext = X509_get_ext(cert, i);
-		printf("%s\n", OBJ_nid2ln(OBJ_obj2nid(ext->object)));
-		if(!X509V3_EXT_print_fp(stdout, ext, 0, 0)) ERR_print_errors_fp(stderr);
-		printf("\n");
-		
-	}
-	return 0;
-}
diff --git a/crypto/openssl/crypto/x509v3/x509v3.h b/crypto/openssl/crypto/x509v3/x509v3.h
deleted file mode 100644
index 91d2fb5b8baf..000000000000
--- a/crypto/openssl/crypto/x509v3/x509v3.h
+++ /dev/null
@@ -1,919 +0,0 @@
-/* x509v3.h */
-/* Written by Dr Stephen N Henson (shenson@bigfoot.com) for the OpenSSL
- * project 1999.
- */
-/* ====================================================================
- * Copyright (c) 1999-2004 The OpenSSL Project.  All rights reserved.
- *
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions
- * are met:
- *
- * 1. Redistributions of source code must retain the above copyright
- *    notice, this list of conditions and the following disclaimer. 
- *
- * 2. Redistributions in binary form must reproduce the above copyright
- *    notice, this list of conditions and the following disclaimer in
- *    the documentation and/or other materials provided with the
- *    distribution.
- *
- * 3. All advertising materials mentioning features or use of this
- *    software must display the following acknowledgment:
- *    "This product includes software developed by the OpenSSL Project
- *    for use in the OpenSSL Toolkit. (http://www.OpenSSL.org/)"
- *
- * 4. The names "OpenSSL Toolkit" and "OpenSSL Project" must not be used to
- *    endorse or promote products derived from this software without
- *    prior written permission. For written permission, please contact
- *    licensing@OpenSSL.org.
- *
- * 5. Products derived from this software may not be called "OpenSSL"
- *    nor may "OpenSSL" appear in their names without prior written
- *    permission of the OpenSSL Project.
- *
- * 6. Redistributions of any form whatsoever must retain the following
- *    acknowledgment:
- *    "This product includes software developed by the OpenSSL Project
- *    for use in the OpenSSL Toolkit (http://www.OpenSSL.org/)"
- *
- * THIS SOFTWARE IS PROVIDED BY THE OpenSSL PROJECT ``AS IS'' AND ANY
- * EXPRESSED OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
- * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR
- * PURPOSE ARE DISCLAIMED.  IN NO EVENT SHALL THE OpenSSL PROJECT OR
- * ITS CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
- * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
- * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
- * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
- * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
- * STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
- * ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED
- * OF THE POSSIBILITY OF SUCH DAMAGE.
- * ====================================================================
- *
- * This product includes cryptographic software written by Eric Young
- * (eay@cryptsoft.com).  This product includes software written by Tim
- * Hudson (tjh@cryptsoft.com).
- *
- */
-#ifndef HEADER_X509V3_H
-#define HEADER_X509V3_H
-
-#include <openssl/bio.h>
-#include <openssl/x509.h>
-#include <openssl/conf.h>
-
-#ifdef __cplusplus
-extern "C" {
-#endif
-
-/* Forward reference */
-struct v3_ext_method;
-struct v3_ext_ctx;
-
-/* Useful typedefs */
-
-typedef void * (*X509V3_EXT_NEW)(void);
-typedef void (*X509V3_EXT_FREE)(void *);
-typedef void * (*X509V3_EXT_D2I)(void *, const unsigned char ** , long);
-typedef int (*X509V3_EXT_I2D)(void *, unsigned char **);
-typedef STACK_OF(CONF_VALUE) * (*X509V3_EXT_I2V)(struct v3_ext_method *method, void *ext, STACK_OF(CONF_VALUE) *extlist);
-typedef void * (*X509V3_EXT_V2I)(struct v3_ext_method *method, struct v3_ext_ctx *ctx, STACK_OF(CONF_VALUE) *values);
-typedef char * (*X509V3_EXT_I2S)(struct v3_ext_method *method, void *ext);
-typedef void * (*X509V3_EXT_S2I)(struct v3_ext_method *method, struct v3_ext_ctx *ctx, const char *str);
-typedef int (*X509V3_EXT_I2R)(struct v3_ext_method *method, void *ext, BIO *out, int indent);
-typedef void * (*X509V3_EXT_R2I)(struct v3_ext_method *method, struct v3_ext_ctx *ctx, const char *str);
-
-/* V3 extension structure */
-
-struct v3_ext_method {
-int ext_nid;
-int ext_flags;
-/* If this is set the following four fields are ignored */
-ASN1_ITEM_EXP *it;
-/* Old style ASN1 calls */
-X509V3_EXT_NEW ext_new;
-X509V3_EXT_FREE ext_free;
-X509V3_EXT_D2I d2i;
-X509V3_EXT_I2D i2d;
-
-/* The following pair is used for string extensions */
-X509V3_EXT_I2S i2s;
-X509V3_EXT_S2I s2i;
-
-/* The following pair is used for multi-valued extensions */
-X509V3_EXT_I2V i2v;
-X509V3_EXT_V2I v2i;
-
-/* The following are used for raw extensions */
-X509V3_EXT_I2R i2r;
-X509V3_EXT_R2I r2i;
-
-void *usr_data;	/* Any extension specific data */
-};
-
-typedef struct X509V3_CONF_METHOD_st {
-char * (*get_string)(void *db, char *section, char *value);
-STACK_OF(CONF_VALUE) * (*get_section)(void *db, char *section);
-void (*free_string)(void *db, char * string);
-void (*free_section)(void *db, STACK_OF(CONF_VALUE) *section);
-} X509V3_CONF_METHOD;
-
-/* Context specific info */
-struct v3_ext_ctx {
-#define CTX_TEST 0x1
-int flags;
-X509 *issuer_cert;
-X509 *subject_cert;
-X509_REQ *subject_req;
-X509_CRL *crl;
-X509V3_CONF_METHOD *db_meth;
-void *db;
-/* Maybe more here */
-};
-
-typedef struct v3_ext_method X509V3_EXT_METHOD;
-
-DECLARE_STACK_OF(X509V3_EXT_METHOD)
-
-/* ext_flags values */
-#define X509V3_EXT_DYNAMIC	0x1
-#define X509V3_EXT_CTX_DEP	0x2
-#define X509V3_EXT_MULTILINE	0x4
-
-typedef BIT_STRING_BITNAME ENUMERATED_NAMES;
-
-typedef struct BASIC_CONSTRAINTS_st {
-int ca;
-ASN1_INTEGER *pathlen;
-} BASIC_CONSTRAINTS;
-
-
-typedef struct PKEY_USAGE_PERIOD_st {
-ASN1_GENERALIZEDTIME *notBefore;
-ASN1_GENERALIZEDTIME *notAfter;
-} PKEY_USAGE_PERIOD;
-
-typedef struct otherName_st {
-ASN1_OBJECT *type_id;
-ASN1_TYPE *value;
-} OTHERNAME;
-
-typedef struct EDIPartyName_st {
-	ASN1_STRING *nameAssigner;
-	ASN1_STRING *partyName;
-} EDIPARTYNAME;
-
-typedef struct GENERAL_NAME_st {
-
-#define GEN_OTHERNAME	0
-#define GEN_EMAIL	1
-#define GEN_DNS		2
-#define GEN_X400	3
-#define GEN_DIRNAME	4
-#define GEN_EDIPARTY	5
-#define GEN_URI		6
-#define GEN_IPADD	7
-#define GEN_RID		8
-
-int type;
-union {
-	char *ptr;
-	OTHERNAME *otherName; /* otherName */
-	ASN1_IA5STRING *rfc822Name;
-	ASN1_IA5STRING *dNSName;
-	ASN1_TYPE *x400Address;
-	X509_NAME *directoryName;
-	EDIPARTYNAME *ediPartyName;
-	ASN1_IA5STRING *uniformResourceIdentifier;
-	ASN1_OCTET_STRING *iPAddress;
-	ASN1_OBJECT *registeredID;
-
-	/* Old names */
-	ASN1_OCTET_STRING *ip; /* iPAddress */
-	X509_NAME *dirn;		/* dirn */
-	ASN1_IA5STRING *ia5;/* rfc822Name, dNSName, uniformResourceIdentifier */
-	ASN1_OBJECT *rid; /* registeredID */
-	ASN1_TYPE *other; /* x400Address */
-} d;
-} GENERAL_NAME;
-
-typedef STACK_OF(GENERAL_NAME) GENERAL_NAMES;
-
-typedef struct ACCESS_DESCRIPTION_st {
-	ASN1_OBJECT *method;
-	GENERAL_NAME *location;
-} ACCESS_DESCRIPTION;
-
-typedef STACK_OF(ACCESS_DESCRIPTION) AUTHORITY_INFO_ACCESS;
-
-typedef STACK_OF(ASN1_OBJECT) EXTENDED_KEY_USAGE;
-
-DECLARE_STACK_OF(GENERAL_NAME)
-DECLARE_ASN1_SET_OF(GENERAL_NAME)
-
-DECLARE_STACK_OF(ACCESS_DESCRIPTION)
-DECLARE_ASN1_SET_OF(ACCESS_DESCRIPTION)
-
-typedef struct DIST_POINT_NAME_st {
-int type;
-union {
-	GENERAL_NAMES *fullname;
-	STACK_OF(X509_NAME_ENTRY) *relativename;
-} name;
-} DIST_POINT_NAME;
-
-typedef struct DIST_POINT_st {
-DIST_POINT_NAME	*distpoint;
-ASN1_BIT_STRING *reasons;
-GENERAL_NAMES *CRLissuer;
-} DIST_POINT;
-
-typedef STACK_OF(DIST_POINT) CRL_DIST_POINTS;
-
-DECLARE_STACK_OF(DIST_POINT)
-DECLARE_ASN1_SET_OF(DIST_POINT)
-
-typedef struct AUTHORITY_KEYID_st {
-ASN1_OCTET_STRING *keyid;
-GENERAL_NAMES *issuer;
-ASN1_INTEGER *serial;
-} AUTHORITY_KEYID;
-
-/* Strong extranet structures */
-
-typedef struct SXNET_ID_st {
-	ASN1_INTEGER *zone;
-	ASN1_OCTET_STRING *user;
-} SXNETID;
-
-DECLARE_STACK_OF(SXNETID)
-DECLARE_ASN1_SET_OF(SXNETID)
-
-typedef struct SXNET_st {
-	ASN1_INTEGER *version;
-	STACK_OF(SXNETID) *ids;
-} SXNET;
-
-typedef struct NOTICEREF_st {
-	ASN1_STRING *organization;
-	STACK_OF(ASN1_INTEGER) *noticenos;
-} NOTICEREF;
-
-typedef struct USERNOTICE_st {
-	NOTICEREF *noticeref;
-	ASN1_STRING *exptext;
-} USERNOTICE;
-
-typedef struct POLICYQUALINFO_st {
-	ASN1_OBJECT *pqualid;
-	union {
-		ASN1_IA5STRING *cpsuri;
-		USERNOTICE *usernotice;
-		ASN1_TYPE *other;
-	} d;
-} POLICYQUALINFO;
-
-DECLARE_STACK_OF(POLICYQUALINFO)
-DECLARE_ASN1_SET_OF(POLICYQUALINFO)
-
-typedef struct POLICYINFO_st {
-	ASN1_OBJECT *policyid;
-	STACK_OF(POLICYQUALINFO) *qualifiers;
-} POLICYINFO;
-
-typedef STACK_OF(POLICYINFO) CERTIFICATEPOLICIES;
-
-DECLARE_STACK_OF(POLICYINFO)
-DECLARE_ASN1_SET_OF(POLICYINFO)
-
-typedef struct POLICY_MAPPING_st {
-	ASN1_OBJECT *issuerDomainPolicy;
-	ASN1_OBJECT *subjectDomainPolicy;
-} POLICY_MAPPING;
-
-DECLARE_STACK_OF(POLICY_MAPPING)
-
-typedef STACK_OF(POLICY_MAPPING) POLICY_MAPPINGS;
-
-typedef struct GENERAL_SUBTREE_st {
-	GENERAL_NAME *base;
-	ASN1_INTEGER *minimum;
-	ASN1_INTEGER *maximum;
-} GENERAL_SUBTREE;
-
-DECLARE_STACK_OF(GENERAL_SUBTREE)
-
-typedef struct NAME_CONSTRAINTS_st {
-	STACK_OF(GENERAL_SUBTREE) *permittedSubtrees;
-	STACK_OF(GENERAL_SUBTREE) *excludedSubtrees;
-} NAME_CONSTRAINTS;
-
-typedef struct POLICY_CONSTRAINTS_st {
-	ASN1_INTEGER *requireExplicitPolicy;
-	ASN1_INTEGER *inhibitPolicyMapping;
-} POLICY_CONSTRAINTS;
-
-/* Proxy certificate structures, see RFC 3820 */
-typedef struct PROXY_POLICY_st
-	{
-	ASN1_OBJECT *policyLanguage;
-	ASN1_OCTET_STRING *policy;
-	} PROXY_POLICY;
-
-typedef struct PROXY_CERT_INFO_EXTENSION_st
-	{
-	ASN1_INTEGER *pcPathLengthConstraint;
-	PROXY_POLICY *proxyPolicy;
-	} PROXY_CERT_INFO_EXTENSION;
-
-DECLARE_ASN1_FUNCTIONS(PROXY_POLICY)
-DECLARE_ASN1_FUNCTIONS(PROXY_CERT_INFO_EXTENSION)
-
-
-#define X509V3_conf_err(val) ERR_add_error_data(6, "section:", val->section, \
-",name:", val->name, ",value:", val->value);
-
-#define X509V3_set_ctx_test(ctx) \
-			X509V3_set_ctx(ctx, NULL, NULL, NULL, NULL, CTX_TEST)
-#define X509V3_set_ctx_nodb(ctx) (ctx)->db = NULL;
-
-#define EXT_BITSTRING(nid, table) { nid, 0, ASN1_ITEM_ref(ASN1_BIT_STRING), \
-			0,0,0,0, \
-			0,0, \
-			(X509V3_EXT_I2V)i2v_ASN1_BIT_STRING, \
-			(X509V3_EXT_V2I)v2i_ASN1_BIT_STRING, \
-			NULL, NULL, \
-			table}
-
-#define EXT_IA5STRING(nid) { nid, 0, ASN1_ITEM_ref(ASN1_IA5STRING), \
-			0,0,0,0, \
-			(X509V3_EXT_I2S)i2s_ASN1_IA5STRING, \
-			(X509V3_EXT_S2I)s2i_ASN1_IA5STRING, \
-			0,0,0,0, \
-			NULL}
-
-#define EXT_END { -1, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0}
-
-
-/* X509_PURPOSE stuff */
-
-#define EXFLAG_BCONS		0x1
-#define EXFLAG_KUSAGE		0x2
-#define EXFLAG_XKUSAGE		0x4
-#define EXFLAG_NSCERT		0x8
-
-#define EXFLAG_CA		0x10
-#define EXFLAG_SS		0x20
-#define EXFLAG_V1		0x40
-#define EXFLAG_INVALID		0x80
-#define EXFLAG_SET		0x100
-#define EXFLAG_CRITICAL		0x200
-#define EXFLAG_PROXY		0x400
-
-#define EXFLAG_INVALID_POLICY	0x400
-
-#define KU_DIGITAL_SIGNATURE	0x0080
-#define KU_NON_REPUDIATION	0x0040
-#define KU_KEY_ENCIPHERMENT	0x0020
-#define KU_DATA_ENCIPHERMENT	0x0010
-#define KU_KEY_AGREEMENT	0x0008
-#define KU_KEY_CERT_SIGN	0x0004
-#define KU_CRL_SIGN		0x0002
-#define KU_ENCIPHER_ONLY	0x0001
-#define KU_DECIPHER_ONLY	0x8000
-
-#define NS_SSL_CLIENT		0x80
-#define NS_SSL_SERVER		0x40
-#define NS_SMIME		0x20
-#define NS_OBJSIGN		0x10
-#define NS_SSL_CA		0x04
-#define NS_SMIME_CA		0x02
-#define NS_OBJSIGN_CA		0x01
-#define NS_ANY_CA		(NS_SSL_CA|NS_SMIME_CA|NS_OBJSIGN_CA)
-
-#define XKU_SSL_SERVER		0x1	
-#define XKU_SSL_CLIENT		0x2
-#define XKU_SMIME		0x4
-#define XKU_CODE_SIGN		0x8
-#define XKU_SGC			0x10
-#define XKU_OCSP_SIGN		0x20
-#define XKU_TIMESTAMP		0x40
-#define XKU_DVCS		0x80
-
-#define X509_PURPOSE_DYNAMIC	0x1
-#define X509_PURPOSE_DYNAMIC_NAME	0x2
-
-typedef struct x509_purpose_st {
-	int purpose;
-	int trust;		/* Default trust ID */
-	int flags;
-	int (*check_purpose)(const struct x509_purpose_st *,
-				const X509 *, int);
-	char *name;
-	char *sname;
-	void *usr_data;
-} X509_PURPOSE;
-
-#define X509_PURPOSE_SSL_CLIENT		1
-#define X509_PURPOSE_SSL_SERVER		2
-#define X509_PURPOSE_NS_SSL_SERVER	3
-#define X509_PURPOSE_SMIME_SIGN		4
-#define X509_PURPOSE_SMIME_ENCRYPT	5
-#define X509_PURPOSE_CRL_SIGN		6
-#define X509_PURPOSE_ANY		7
-#define X509_PURPOSE_OCSP_HELPER	8
-
-#define X509_PURPOSE_MIN		1
-#define X509_PURPOSE_MAX		8
-
-/* Flags for X509V3_EXT_print() */
-
-#define X509V3_EXT_UNKNOWN_MASK		(0xfL << 16)
-/* Return error for unknown extensions */
-#define X509V3_EXT_DEFAULT		0
-/* Print error for unknown extensions */
-#define X509V3_EXT_ERROR_UNKNOWN	(1L << 16)
-/* ASN1 parse unknown extensions */
-#define X509V3_EXT_PARSE_UNKNOWN	(2L << 16)
-/* BIO_dump unknown extensions */
-#define X509V3_EXT_DUMP_UNKNOWN		(3L << 16)
-
-/* Flags for X509V3_add1_i2d */
-
-#define X509V3_ADD_OP_MASK		0xfL
-#define X509V3_ADD_DEFAULT		0L
-#define X509V3_ADD_APPEND		1L
-#define X509V3_ADD_REPLACE		2L
-#define X509V3_ADD_REPLACE_EXISTING	3L
-#define X509V3_ADD_KEEP_EXISTING	4L
-#define X509V3_ADD_DELETE		5L
-#define X509V3_ADD_SILENT		0x10
-
-DECLARE_STACK_OF(X509_PURPOSE)
-
-DECLARE_ASN1_FUNCTIONS(BASIC_CONSTRAINTS)
-
-DECLARE_ASN1_FUNCTIONS(SXNET)
-DECLARE_ASN1_FUNCTIONS(SXNETID)
-
-int SXNET_add_id_asc(SXNET **psx, char *zone, char *user, int userlen); 
-int SXNET_add_id_ulong(SXNET **psx, unsigned long lzone, char *user, int userlen); 
-int SXNET_add_id_INTEGER(SXNET **psx, ASN1_INTEGER *izone, char *user, int userlen); 
-
-ASN1_OCTET_STRING *SXNET_get_id_asc(SXNET *sx, char *zone);
-ASN1_OCTET_STRING *SXNET_get_id_ulong(SXNET *sx, unsigned long lzone);
-ASN1_OCTET_STRING *SXNET_get_id_INTEGER(SXNET *sx, ASN1_INTEGER *zone);
-
-DECLARE_ASN1_FUNCTIONS(AUTHORITY_KEYID)
-
-DECLARE_ASN1_FUNCTIONS(PKEY_USAGE_PERIOD)
-
-DECLARE_ASN1_FUNCTIONS(GENERAL_NAME)
-
-
-ASN1_BIT_STRING *v2i_ASN1_BIT_STRING(X509V3_EXT_METHOD *method,
-				X509V3_CTX *ctx, STACK_OF(CONF_VALUE) *nval);
-STACK_OF(CONF_VALUE) *i2v_ASN1_BIT_STRING(X509V3_EXT_METHOD *method,
-				ASN1_BIT_STRING *bits,
-				STACK_OF(CONF_VALUE) *extlist);
-
-STACK_OF(CONF_VALUE) *i2v_GENERAL_NAME(X509V3_EXT_METHOD *method, GENERAL_NAME *gen, STACK_OF(CONF_VALUE) *ret);
-int GENERAL_NAME_print(BIO *out, GENERAL_NAME *gen);
-
-DECLARE_ASN1_FUNCTIONS(GENERAL_NAMES)
-
-STACK_OF(CONF_VALUE) *i2v_GENERAL_NAMES(X509V3_EXT_METHOD *method,
-		GENERAL_NAMES *gen, STACK_OF(CONF_VALUE) *extlist);
-GENERAL_NAMES *v2i_GENERAL_NAMES(X509V3_EXT_METHOD *method,
-				X509V3_CTX *ctx, STACK_OF(CONF_VALUE) *nval);
-
-DECLARE_ASN1_FUNCTIONS(OTHERNAME)
-DECLARE_ASN1_FUNCTIONS(EDIPARTYNAME)
-
-char *i2s_ASN1_OCTET_STRING(X509V3_EXT_METHOD *method, ASN1_OCTET_STRING *ia5);
-ASN1_OCTET_STRING *s2i_ASN1_OCTET_STRING(X509V3_EXT_METHOD *method, X509V3_CTX *ctx, char *str);
-
-DECLARE_ASN1_FUNCTIONS(EXTENDED_KEY_USAGE)
-int i2a_ACCESS_DESCRIPTION(BIO *bp, ACCESS_DESCRIPTION* a);
-
-DECLARE_ASN1_FUNCTIONS(CERTIFICATEPOLICIES)
-DECLARE_ASN1_FUNCTIONS(POLICYINFO)
-DECLARE_ASN1_FUNCTIONS(POLICYQUALINFO)
-DECLARE_ASN1_FUNCTIONS(USERNOTICE)
-DECLARE_ASN1_FUNCTIONS(NOTICEREF)
-
-DECLARE_ASN1_FUNCTIONS(CRL_DIST_POINTS)
-DECLARE_ASN1_FUNCTIONS(DIST_POINT)
-DECLARE_ASN1_FUNCTIONS(DIST_POINT_NAME)
-
-DECLARE_ASN1_FUNCTIONS(ACCESS_DESCRIPTION)
-DECLARE_ASN1_FUNCTIONS(AUTHORITY_INFO_ACCESS)
-
-DECLARE_ASN1_ITEM(POLICY_MAPPING)
-DECLARE_ASN1_ALLOC_FUNCTIONS(POLICY_MAPPING)
-DECLARE_ASN1_ITEM(POLICY_MAPPINGS)
-
-DECLARE_ASN1_ITEM(GENERAL_SUBTREE)
-DECLARE_ASN1_ALLOC_FUNCTIONS(GENERAL_SUBTREE)
-
-DECLARE_ASN1_ITEM(NAME_CONSTRAINTS)
-DECLARE_ASN1_ALLOC_FUNCTIONS(NAME_CONSTRAINTS)
-
-DECLARE_ASN1_ALLOC_FUNCTIONS(POLICY_CONSTRAINTS)
-DECLARE_ASN1_ITEM(POLICY_CONSTRAINTS)
-
-#ifdef HEADER_CONF_H
-GENERAL_NAME *v2i_GENERAL_NAME(X509V3_EXT_METHOD *method, X509V3_CTX *ctx,
-							CONF_VALUE *cnf);
-GENERAL_NAME *v2i_GENERAL_NAME_ex(GENERAL_NAME *out, X509V3_EXT_METHOD *method,
-				X509V3_CTX *ctx, CONF_VALUE *cnf, int is_nc);
-void X509V3_conf_free(CONF_VALUE *val);
-
-X509_EXTENSION *X509V3_EXT_nconf_nid(CONF *conf, X509V3_CTX *ctx, int ext_nid, char *value);
-X509_EXTENSION *X509V3_EXT_nconf(CONF *conf, X509V3_CTX *ctx, char *name, char *value);
-int X509V3_EXT_add_nconf_sk(CONF *conf, X509V3_CTX *ctx, char *section, STACK_OF(X509_EXTENSION) **sk);
-int X509V3_EXT_add_nconf(CONF *conf, X509V3_CTX *ctx, char *section, X509 *cert);
-int X509V3_EXT_REQ_add_nconf(CONF *conf, X509V3_CTX *ctx, char *section, X509_REQ *req);
-int X509V3_EXT_CRL_add_nconf(CONF *conf, X509V3_CTX *ctx, char *section, X509_CRL *crl);
-
-X509_EXTENSION *X509V3_EXT_conf_nid(LHASH *conf, X509V3_CTX *ctx, int ext_nid, char *value);
-X509_EXTENSION *X509V3_EXT_conf(LHASH *conf, X509V3_CTX *ctx, char *name, char *value);
-int X509V3_EXT_add_conf(LHASH *conf, X509V3_CTX *ctx, char *section, X509 *cert);
-int X509V3_EXT_REQ_add_conf(LHASH *conf, X509V3_CTX *ctx, char *section, X509_REQ *req);
-int X509V3_EXT_CRL_add_conf(LHASH *conf, X509V3_CTX *ctx, char *section, X509_CRL *crl);
-
-int X509V3_add_value_bool_nf(char *name, int asn1_bool,
-						STACK_OF(CONF_VALUE) **extlist);
-int X509V3_get_value_bool(CONF_VALUE *value, int *asn1_bool);
-int X509V3_get_value_int(CONF_VALUE *value, ASN1_INTEGER **aint);
-void X509V3_set_nconf(X509V3_CTX *ctx, CONF *conf);
-void X509V3_set_conf_lhash(X509V3_CTX *ctx, LHASH *lhash);
-#endif
-
-char * X509V3_get_string(X509V3_CTX *ctx, char *name, char *section);
-STACK_OF(CONF_VALUE) * X509V3_get_section(X509V3_CTX *ctx, char *section);
-void X509V3_string_free(X509V3_CTX *ctx, char *str);
-void X509V3_section_free( X509V3_CTX *ctx, STACK_OF(CONF_VALUE) *section);
-void X509V3_set_ctx(X509V3_CTX *ctx, X509 *issuer, X509 *subject,
-				 X509_REQ *req, X509_CRL *crl, int flags);
-
-int X509V3_add_value(const char *name, const char *value,
-						STACK_OF(CONF_VALUE) **extlist);
-int X509V3_add_value_uchar(const char *name, const unsigned char *value,
-						STACK_OF(CONF_VALUE) **extlist);
-int X509V3_add_value_bool(const char *name, int asn1_bool,
-						STACK_OF(CONF_VALUE) **extlist);
-int X509V3_add_value_int(const char *name, ASN1_INTEGER *aint,
-						STACK_OF(CONF_VALUE) **extlist);
-char * i2s_ASN1_INTEGER(X509V3_EXT_METHOD *meth, ASN1_INTEGER *aint);
-ASN1_INTEGER * s2i_ASN1_INTEGER(X509V3_EXT_METHOD *meth, char *value);
-char * i2s_ASN1_ENUMERATED(X509V3_EXT_METHOD *meth, ASN1_ENUMERATED *aint);
-char * i2s_ASN1_ENUMERATED_TABLE(X509V3_EXT_METHOD *meth, ASN1_ENUMERATED *aint);
-int X509V3_EXT_add(X509V3_EXT_METHOD *ext);
-int X509V3_EXT_add_list(X509V3_EXT_METHOD *extlist);
-int X509V3_EXT_add_alias(int nid_to, int nid_from);
-void X509V3_EXT_cleanup(void);
-
-X509V3_EXT_METHOD *X509V3_EXT_get(X509_EXTENSION *ext);
-X509V3_EXT_METHOD *X509V3_EXT_get_nid(int nid);
-int X509V3_add_standard_extensions(void);
-STACK_OF(CONF_VALUE) *X509V3_parse_list(const char *line);
-void *X509V3_EXT_d2i(X509_EXTENSION *ext);
-void *X509V3_get_d2i(STACK_OF(X509_EXTENSION) *x, int nid, int *crit, int *idx);
-
-
-X509_EXTENSION *X509V3_EXT_i2d(int ext_nid, int crit, void *ext_struc);
-int X509V3_add1_i2d(STACK_OF(X509_EXTENSION) **x, int nid, void *value, int crit, unsigned long flags);
-
-char *hex_to_string(unsigned char *buffer, long len);
-unsigned char *string_to_hex(char *str, long *len);
-int name_cmp(const char *name, const char *cmp);
-
-void X509V3_EXT_val_prn(BIO *out, STACK_OF(CONF_VALUE) *val, int indent,
-								 int ml);
-int X509V3_EXT_print(BIO *out, X509_EXTENSION *ext, unsigned long flag, int indent);
-int X509V3_EXT_print_fp(FILE *out, X509_EXTENSION *ext, int flag, int indent);
-
-int X509V3_extensions_print(BIO *out, char *title, STACK_OF(X509_EXTENSION) *exts, unsigned long flag, int indent);
-
-int X509_check_ca(X509 *x);
-int X509_check_purpose(X509 *x, int id, int ca);
-int X509_supported_extension(X509_EXTENSION *ex);
-int X509_PURPOSE_set(int *p, int purpose);
-int X509_check_issued(X509 *issuer, X509 *subject);
-int X509_PURPOSE_get_count(void);
-X509_PURPOSE * X509_PURPOSE_get0(int idx);
-int X509_PURPOSE_get_by_sname(char *sname);
-int X509_PURPOSE_get_by_id(int id);
-int X509_PURPOSE_add(int id, int trust, int flags,
-			int (*ck)(const X509_PURPOSE *, const X509 *, int),
-				char *name, char *sname, void *arg);
-char *X509_PURPOSE_get0_name(X509_PURPOSE *xp);
-char *X509_PURPOSE_get0_sname(X509_PURPOSE *xp);
-int X509_PURPOSE_get_trust(X509_PURPOSE *xp);
-void X509_PURPOSE_cleanup(void);
-int X509_PURPOSE_get_id(X509_PURPOSE *);
-
-STACK *X509_get1_email(X509 *x);
-STACK *X509_REQ_get1_email(X509_REQ *x);
-void X509_email_free(STACK *sk);
-
-ASN1_OCTET_STRING *a2i_IPADDRESS(const char *ipasc);
-ASN1_OCTET_STRING *a2i_IPADDRESS_NC(const char *ipasc);
-int a2i_ipadd(unsigned char *ipout, const char *ipasc);
-int X509V3_NAME_from_section(X509_NAME *nm, STACK_OF(CONF_VALUE)*dn_sk,
-						unsigned long chtype);
-
-void X509_POLICY_NODE_print(BIO *out, X509_POLICY_NODE *node, int indent);
-
-#ifndef OPENSSL_NO_RFC3779
-
-typedef struct ASRange_st {
-  ASN1_INTEGER *min, *max;
-} ASRange;
-
-#define	ASIdOrRange_id		0
-#define	ASIdOrRange_range	1
-
-typedef struct ASIdOrRange_st {
-  int type;
-  union {
-    ASN1_INTEGER *id;
-    ASRange      *range;
-  } u;
-} ASIdOrRange;
-
-typedef STACK_OF(ASIdOrRange) ASIdOrRanges;
-DECLARE_STACK_OF(ASIdOrRange)
-
-#define	ASIdentifierChoice_inherit		0
-#define	ASIdentifierChoice_asIdsOrRanges	1
-
-typedef struct ASIdentifierChoice_st {
-  int type;
-  union {
-    ASN1_NULL    *inherit;
-    ASIdOrRanges *asIdsOrRanges;
-  } u;
-} ASIdentifierChoice;
-
-typedef struct ASIdentifiers_st {
-  ASIdentifierChoice *asnum, *rdi;
-} ASIdentifiers;
-
-DECLARE_ASN1_FUNCTIONS(ASRange)
-DECLARE_ASN1_FUNCTIONS(ASIdOrRange)
-DECLARE_ASN1_FUNCTIONS(ASIdentifierChoice)
-DECLARE_ASN1_FUNCTIONS(ASIdentifiers)
-
-
-typedef struct IPAddressRange_st {
-  ASN1_BIT_STRING	*min, *max;
-} IPAddressRange;
-
-#define	IPAddressOrRange_addressPrefix	0
-#define	IPAddressOrRange_addressRange	1
-
-typedef struct IPAddressOrRange_st {
-  int type;
-  union {
-    ASN1_BIT_STRING	*addressPrefix;
-    IPAddressRange	*addressRange;
-  } u;
-} IPAddressOrRange;
-
-typedef STACK_OF(IPAddressOrRange) IPAddressOrRanges;
-DECLARE_STACK_OF(IPAddressOrRange)
-
-#define	IPAddressChoice_inherit			0
-#define	IPAddressChoice_addressesOrRanges	1
-
-typedef struct IPAddressChoice_st {
-  int type;
-  union {
-    ASN1_NULL		*inherit;
-    IPAddressOrRanges	*addressesOrRanges;
-  } u;
-} IPAddressChoice;
-
-typedef struct IPAddressFamily_st {
-  ASN1_OCTET_STRING	*addressFamily;
-  IPAddressChoice	*ipAddressChoice;
-} IPAddressFamily;
-
-typedef STACK_OF(IPAddressFamily) IPAddrBlocks;
-DECLARE_STACK_OF(IPAddressFamily)
-
-DECLARE_ASN1_FUNCTIONS(IPAddressRange)
-DECLARE_ASN1_FUNCTIONS(IPAddressOrRange)
-DECLARE_ASN1_FUNCTIONS(IPAddressChoice)
-DECLARE_ASN1_FUNCTIONS(IPAddressFamily)
-
-/*
- * API tag for elements of the ASIdentifer SEQUENCE.
- */
-#define	V3_ASID_ASNUM	0
-#define	V3_ASID_RDI	1
-
-/*
- * AFI values, assigned by IANA.  It'd be nice to make the AFI
- * handling code totally generic, but there are too many little things
- * that would need to be defined for other address families for it to
- * be worth the trouble.
- */
-#define	IANA_AFI_IPV4	1
-#define	IANA_AFI_IPV6	2
-
-/*
- * Utilities to construct and extract values from RFC3779 extensions,
- * since some of the encodings (particularly for IP address prefixes
- * and ranges) are a bit tedious to work with directly.
- */
-int v3_asid_add_inherit(ASIdentifiers *asid, int which);
-int v3_asid_add_id_or_range(ASIdentifiers *asid, int which,
-			    ASN1_INTEGER *min, ASN1_INTEGER *max);
-int v3_addr_add_inherit(IPAddrBlocks *addr,
-			const unsigned afi, const unsigned *safi);
-int v3_addr_add_prefix(IPAddrBlocks *addr,
-		       const unsigned afi, const unsigned *safi,
-		       unsigned char *a, const int prefixlen);
-int v3_addr_add_range(IPAddrBlocks *addr,
-		      const unsigned afi, const unsigned *safi,
-		      unsigned char *min, unsigned char *max);
-unsigned v3_addr_get_afi(const IPAddressFamily *f);
-int v3_addr_get_range(IPAddressOrRange *aor, const unsigned afi,
-		      unsigned char *min, unsigned char *max,
-		      const int length);
-
-/*
- * Canonical forms.
- */
-int v3_asid_is_canonical(ASIdentifiers *asid);
-int v3_addr_is_canonical(IPAddrBlocks *addr);
-int v3_asid_canonize(ASIdentifiers *asid);
-int v3_addr_canonize(IPAddrBlocks *addr);
-
-/*
- * Tests for inheritance and containment.
- */
-int v3_asid_inherits(ASIdentifiers *asid);
-int v3_addr_inherits(IPAddrBlocks *addr);
-int v3_asid_subset(ASIdentifiers *a, ASIdentifiers *b);
-int v3_addr_subset(IPAddrBlocks *a, IPAddrBlocks *b);
-
-/*
- * Check whether RFC 3779 extensions nest properly in chains.
- */
-int v3_asid_validate_path(X509_STORE_CTX *);
-int v3_addr_validate_path(X509_STORE_CTX *);
-int v3_asid_validate_resource_set(STACK_OF(X509) *chain,
-				  ASIdentifiers *ext,
-				  int allow_inheritance);
-int v3_addr_validate_resource_set(STACK_OF(X509) *chain,
-				  IPAddrBlocks *ext,
-				  int allow_inheritance);
-
-#endif /* OPENSSL_NO_RFC3779 */
-
-/* BEGIN ERROR CODES */
-/* The following lines are auto generated by the script mkerr.pl. Any changes
- * made after this point may be overwritten when the script is next run.
- */
-void ERR_load_X509V3_strings(void);
-
-/* Error codes for the X509V3 functions. */
-
-/* Function codes. */
-#define X509V3_F_ASIDENTIFIERCHOICE_CANONIZE		 156
-#define X509V3_F_ASIDENTIFIERCHOICE_IS_CANONICAL	 157
-#define X509V3_F_COPY_EMAIL				 122
-#define X509V3_F_COPY_ISSUER				 123
-#define X509V3_F_DO_DIRNAME				 144
-#define X509V3_F_DO_EXT_CONF				 124
-#define X509V3_F_DO_EXT_I2D				 135
-#define X509V3_F_DO_EXT_NCONF				 151
-#define X509V3_F_DO_I2V_NAME_CONSTRAINTS		 148
-#define X509V3_F_HEX_TO_STRING				 111
-#define X509V3_F_I2S_ASN1_ENUMERATED			 121
-#define X509V3_F_I2S_ASN1_IA5STRING			 149
-#define X509V3_F_I2S_ASN1_INTEGER			 120
-#define X509V3_F_I2V_AUTHORITY_INFO_ACCESS		 138
-#define X509V3_F_NOTICE_SECTION				 132
-#define X509V3_F_NREF_NOS				 133
-#define X509V3_F_POLICY_SECTION				 131
-#define X509V3_F_PROCESS_PCI_VALUE			 150
-#define X509V3_F_R2I_CERTPOL				 130
-#define X509V3_F_R2I_PCI				 155
-#define X509V3_F_S2I_ASN1_IA5STRING			 100
-#define X509V3_F_S2I_ASN1_INTEGER			 108
-#define X509V3_F_S2I_ASN1_OCTET_STRING			 112
-#define X509V3_F_S2I_ASN1_SKEY_ID			 114
-#define X509V3_F_S2I_SKEY_ID				 115
-#define X509V3_F_STRING_TO_HEX				 113
-#define X509V3_F_SXNET_ADD_ID_ASC			 125
-#define X509V3_F_SXNET_ADD_ID_INTEGER			 126
-#define X509V3_F_SXNET_ADD_ID_ULONG			 127
-#define X509V3_F_SXNET_GET_ID_ASC			 128
-#define X509V3_F_SXNET_GET_ID_ULONG			 129
-#define X509V3_F_V2I_ASIDENTIFIERS			 158
-#define X509V3_F_V2I_ASN1_BIT_STRING			 101
-#define X509V3_F_V2I_AUTHORITY_INFO_ACCESS		 139
-#define X509V3_F_V2I_AUTHORITY_KEYID			 119
-#define X509V3_F_V2I_BASIC_CONSTRAINTS			 102
-#define X509V3_F_V2I_CRLD				 134
-#define X509V3_F_V2I_EXTENDED_KEY_USAGE			 103
-#define X509V3_F_V2I_GENERAL_NAMES			 118
-#define X509V3_F_V2I_GENERAL_NAME_EX			 117
-#define X509V3_F_V2I_IPADDRBLOCKS			 159
-#define X509V3_F_V2I_ISSUER_ALT				 153
-#define X509V3_F_V2I_NAME_CONSTRAINTS			 147
-#define X509V3_F_V2I_POLICY_CONSTRAINTS			 146
-#define X509V3_F_V2I_POLICY_MAPPINGS			 145
-#define X509V3_F_V2I_SUBJECT_ALT			 154
-#define X509V3_F_V3_ADDR_VALIDATE_PATH_INTERNAL		 160
-#define X509V3_F_V3_GENERIC_EXTENSION			 116
-#define X509V3_F_X509V3_ADD1_I2D			 140
-#define X509V3_F_X509V3_ADD_VALUE			 105
-#define X509V3_F_X509V3_EXT_ADD				 104
-#define X509V3_F_X509V3_EXT_ADD_ALIAS			 106
-#define X509V3_F_X509V3_EXT_CONF			 107
-#define X509V3_F_X509V3_EXT_I2D				 136
-#define X509V3_F_X509V3_EXT_NCONF			 152
-#define X509V3_F_X509V3_GET_SECTION			 142
-#define X509V3_F_X509V3_GET_STRING			 143
-#define X509V3_F_X509V3_GET_VALUE_BOOL			 110
-#define X509V3_F_X509V3_PARSE_LIST			 109
-#define X509V3_F_X509_PURPOSE_ADD			 137
-#define X509V3_F_X509_PURPOSE_SET			 141
-
-/* Reason codes. */
-#define X509V3_R_BAD_IP_ADDRESS				 118
-#define X509V3_R_BAD_OBJECT				 119
-#define X509V3_R_BN_DEC2BN_ERROR			 100
-#define X509V3_R_BN_TO_ASN1_INTEGER_ERROR		 101
-#define X509V3_R_DIRNAME_ERROR				 149
-#define X509V3_R_DUPLICATE_ZONE_ID			 133
-#define X509V3_R_ERROR_CONVERTING_ZONE			 131
-#define X509V3_R_ERROR_CREATING_EXTENSION		 144
-#define X509V3_R_ERROR_IN_EXTENSION			 128
-#define X509V3_R_EXPECTED_A_SECTION_NAME		 137
-#define X509V3_R_EXTENSION_EXISTS			 145
-#define X509V3_R_EXTENSION_NAME_ERROR			 115
-#define X509V3_R_EXTENSION_NOT_FOUND			 102
-#define X509V3_R_EXTENSION_SETTING_NOT_SUPPORTED	 103
-#define X509V3_R_EXTENSION_VALUE_ERROR			 116
-#define X509V3_R_ILLEGAL_EMPTY_EXTENSION		 151
-#define X509V3_R_ILLEGAL_HEX_DIGIT			 113
-#define X509V3_R_INCORRECT_POLICY_SYNTAX_TAG		 152
-#define X509V3_R_INVALID_ASNUMBER			 160
-#define X509V3_R_INVALID_ASRANGE			 161
-#define X509V3_R_INVALID_BOOLEAN_STRING			 104
-#define X509V3_R_INVALID_EXTENSION_STRING		 105
-#define X509V3_R_INVALID_INHERITANCE			 162
-#define X509V3_R_INVALID_IPADDRESS			 163
-#define X509V3_R_INVALID_NAME				 106
-#define X509V3_R_INVALID_NULL_ARGUMENT			 107
-#define X509V3_R_INVALID_NULL_NAME			 108
-#define X509V3_R_INVALID_NULL_VALUE			 109
-#define X509V3_R_INVALID_NUMBER				 140
-#define X509V3_R_INVALID_NUMBERS			 141
-#define X509V3_R_INVALID_OBJECT_IDENTIFIER		 110
-#define X509V3_R_INVALID_OPTION				 138
-#define X509V3_R_INVALID_POLICY_IDENTIFIER		 134
-#define X509V3_R_INVALID_PROXY_POLICY_SETTING		 153
-#define X509V3_R_INVALID_PURPOSE			 146
-#define X509V3_R_INVALID_SAFI				 164
-#define X509V3_R_INVALID_SECTION			 135
-#define X509V3_R_INVALID_SYNTAX				 143
-#define X509V3_R_ISSUER_DECODE_ERROR			 126
-#define X509V3_R_MISSING_VALUE				 124
-#define X509V3_R_NEED_ORGANIZATION_AND_NUMBERS		 142
-#define X509V3_R_NO_CONFIG_DATABASE			 136
-#define X509V3_R_NO_ISSUER_CERTIFICATE			 121
-#define X509V3_R_NO_ISSUER_DETAILS			 127
-#define X509V3_R_NO_POLICY_IDENTIFIER			 139
-#define X509V3_R_NO_PROXY_CERT_POLICY_LANGUAGE_DEFINED	 154
-#define X509V3_R_NO_PUBLIC_KEY				 114
-#define X509V3_R_NO_SUBJECT_DETAILS			 125
-#define X509V3_R_ODD_NUMBER_OF_DIGITS			 112
-#define X509V3_R_OPERATION_NOT_DEFINED			 148
-#define X509V3_R_OTHERNAME_ERROR			 147
-#define X509V3_R_POLICY_LANGUAGE_ALREADTY_DEFINED	 155
-#define X509V3_R_POLICY_PATH_LENGTH			 156
-#define X509V3_R_POLICY_PATH_LENGTH_ALREADTY_DEFINED	 157
-#define X509V3_R_POLICY_SYNTAX_NOT_CURRENTLY_SUPPORTED	 158
-#define X509V3_R_POLICY_WHEN_PROXY_LANGUAGE_REQUIRES_NO_POLICY 159
-#define X509V3_R_SECTION_NOT_FOUND			 150
-#define X509V3_R_UNABLE_TO_GET_ISSUER_DETAILS		 122
-#define X509V3_R_UNABLE_TO_GET_ISSUER_KEYID		 123
-#define X509V3_R_UNKNOWN_BIT_STRING_ARGUMENT		 111
-#define X509V3_R_UNKNOWN_EXTENSION			 129
-#define X509V3_R_UNKNOWN_EXTENSION_NAME			 130
-#define X509V3_R_UNKNOWN_OPTION				 120
-#define X509V3_R_UNSUPPORTED_OPTION			 117
-#define X509V3_R_USER_TOO_LONG				 132
-
-#ifdef  __cplusplus
-}
-#endif
-#endif
diff --git a/crypto/openssl/crypto/x86_64cpuid.pl b/crypto/openssl/crypto/x86_64cpuid.pl
deleted file mode 100644
index 4d88ad191b37..000000000000
--- a/crypto/openssl/crypto/x86_64cpuid.pl
+++ /dev/null
@@ -1,138 +0,0 @@
-#!/usr/bin/env perl
-
-$output=shift;
-$win64a=1 if ($output =~ /win64a\.[s|asm]/);
-open STDOUT,">$output" || die "can't open $output: $!";
-
-print<<___ if(defined($win64a));
-_TEXT	SEGMENT
-PUBLIC	OPENSSL_rdtsc
-ALIGN	16
-OPENSSL_rdtsc	PROC
-	rdtsc
-	shl	rdx,32
-	or	rax,rdx
-	ret
-OPENSSL_rdtsc	ENDP
-
-PUBLIC	OPENSSL_atomic_add
-ALIGN	16
-OPENSSL_atomic_add	PROC
-	mov	eax,DWORD PTR[rcx]
-\$Lspin:	lea	r8,DWORD PTR[rdx+rax]
-lock	cmpxchg	DWORD PTR[rcx],r8d
-	jne	\$Lspin
-	mov	eax,r8d
-	cdqe    
-	ret
-OPENSSL_atomic_add	ENDP
-
-PUBLIC	OPENSSL_wipe_cpu
-ALIGN	16
-OPENSSL_wipe_cpu	PROC
-	pxor	xmm0,xmm0
-	pxor	xmm1,xmm1
-	pxor	xmm2,xmm2
-	pxor	xmm3,xmm3
-	pxor	xmm4,xmm4
-	pxor	xmm5,xmm5
-	xor	rcx,rcx
-	xor	rdx,rdx
-	xor	r8,r8
-	xor	r9,r9
-	xor	r10,r10
-	xor	r11,r11
-	lea	rax,QWORD PTR[rsp+8]
-	ret
-OPENSSL_wipe_cpu	ENDP
-
-OPENSSL_ia32_cpuid	PROC
-	mov	r8,rbx
-	mov	eax,1
-	cpuid
-	shl	rcx,32
-	mov	eax,edx
-	mov	rbx,r8
-	or	rax,rcx
-	ret
-OPENSSL_ia32_cpuid	ENDP
-_TEXT	ENDS
-
-CRT\$XIU	SEGMENT
-EXTRN	OPENSSL_cpuid_setup:PROC
-DQ	OPENSSL_cpuid_setup
-CRT\$XIU	ENDS
-END
-___
-print<<___ if(!defined($win64a));
-.text
-.globl	OPENSSL_rdtsc
-.align	16
-OPENSSL_rdtsc:
-	rdtsc
-	shlq	\$32,%rdx
-	orq	%rdx,%rax
-	ret
-.size	OPENSSL_rdtsc,.-OPENSSL_rdtsc
-
-.globl	OPENSSL_atomic_add
-.type	OPENSSL_atomic_add,\@function
-.align	16
-OPENSSL_atomic_add:
-	movl	(%rdi),%eax
-.Lspin:	leaq	(%rsi,%rax),%r8
-lock;	cmpxchgl	%r8d,(%rdi)
-	jne	.Lspin
-	movl	%r8d,%eax
-	.byte	0x48,0x98
-	ret
-.size	OPENSSL_atomic_add,.-OPENSSL_atomic_add
-
-.globl	OPENSSL_wipe_cpu
-.type	OPENSSL_wipe_cpu,\@function
-.align	16
-OPENSSL_wipe_cpu:
-	pxor	%xmm0,%xmm0
-	pxor	%xmm1,%xmm1
-	pxor	%xmm2,%xmm2
-	pxor	%xmm3,%xmm3
-	pxor	%xmm4,%xmm4
-	pxor	%xmm5,%xmm5
-	pxor	%xmm6,%xmm6
-	pxor	%xmm7,%xmm7
-	pxor	%xmm8,%xmm8
-	pxor	%xmm9,%xmm9
-	pxor	%xmm10,%xmm10
-	pxor	%xmm11,%xmm11
-	pxor	%xmm12,%xmm12
-	pxor	%xmm13,%xmm13
-	pxor	%xmm14,%xmm14
-	pxor	%xmm15,%xmm15
-	xorq	%rcx,%rcx
-	xorq	%rdx,%rdx
-	xorq	%rsi,%rsi
-	xorq	%rdi,%rdi
-	xorq	%r8,%r8
-	xorq	%r9,%r9
-	xorq	%r10,%r10
-	xorq	%r11,%r11
-	leaq	8(%rsp),%rax
-	ret
-.size	OPENSSL_wipe_cpu,.-OPENSSL_wipe_cpu
-
-.globl	OPENSSL_ia32_cpuid
-.align	16
-OPENSSL_ia32_cpuid:
-	movq	%rbx,%r8
-	movl	\$1,%eax
-	cpuid
-	shlq	\$32,%rcx
-	movl	%edx,%eax
-	movq	%r8,%rbx
-	orq	%rcx,%rax
-	ret
-.size	OPENSSL_ia32_cpuid,.-OPENSSL_ia32_cpuid
-
-.section	.init
-	call	OPENSSL_cpuid_setup
-___
diff --git a/crypto/openssl/crypto/x86cpuid.pl b/crypto/openssl/crypto/x86cpuid.pl
deleted file mode 100644
index c53c9bc9980f..000000000000
--- a/crypto/openssl/crypto/x86cpuid.pl
+++ /dev/null
@@ -1,197 +0,0 @@
-#!/usr/bin/env perl
-
-push(@INC,"perlasm");
-require "x86asm.pl";
-
-&asm_init($ARGV[0],"x86cpuid");
-
-for (@ARGV) { $sse2=1 if (/-DOPENSSL_IA32_SSE2/); }
-
-&function_begin("OPENSSL_ia32_cpuid");
-	&xor	("edx","edx");
-	&pushf	();
-	&pop	("eax");
-	&mov	("ecx","eax");
-	&xor	("eax",1<<21);
-	&push	("eax");
-	&popf	();
-	&pushf	();
-	&pop	("eax");
-	&xor	("ecx","eax");
-	&bt	("ecx",21);
-	&jnc	(&label("nocpuid"));
-	&mov	("eax",1);
-	&cpuid	();
-&set_label("nocpuid");
-	&mov	("eax","edx");
-	&mov	("edx","ecx");
-&function_end("OPENSSL_ia32_cpuid");
-
-&external_label("OPENSSL_ia32cap_P");
-
-&function_begin_B("OPENSSL_rdtsc","EXTRN\t_OPENSSL_ia32cap_P:DWORD");
-	&xor	("eax","eax");
-	&xor	("edx","edx");
-	&picmeup("ecx","OPENSSL_ia32cap_P");
-	&bt	(&DWP(0,"ecx"),4);
-	&jnc	(&label("notsc"));
-	&rdtsc	();
-&set_label("notsc");
-	&ret	();
-&function_end_B("OPENSSL_rdtsc");
-
-# This works in Ring 0 only [read DJGPP+MS-DOS+privileged DPMI host],
-# but it's safe to call it on any [supported] 32-bit platform...
-# Just check for [non-]zero return value...
-&function_begin_B("OPENSSL_instrument_halt","EXTRN\t_OPENSSL_ia32cap_P:DWORD");
-	&picmeup("ecx","OPENSSL_ia32cap_P");
-	&bt	(&DWP(0,"ecx"),4);
-	&jnc	(&label("nohalt"));	# no TSC
-
-	&data_word(0x9058900e);		# push %cs; pop %eax
-	&and	("eax",3);
-	&jnz	(&label("nohalt"));	# not enough privileges
-
-	&pushf	();
-	&pop	("eax")
-	&bt	("eax",9);
-	&jnc	(&label("nohalt"));	# interrupts are disabled
-
-	&rdtsc	();
-	&push	("edx");
-	&push	("eax");
-	&halt	();
-	&rdtsc	();
-
-	&sub	("eax",&DWP(0,"esp"));
-	&sbb	("edx",&DWP(4,"esp"));
-	&add	("esp",8);
-	&ret	();
-
-&set_label("nohalt");
-	&xor	("eax","eax");
-	&xor	("edx","edx");
-	&ret	();
-&function_end_B("OPENSSL_instrument_halt");
-
-# Essentially there is only one use for this function. Under DJGPP:
-#
-#	#include <go32.h>
-#	...
-#	i=OPENSSL_far_spin(_dos_ds,0x46c);
-#	...
-# to obtain the number of spins till closest timer interrupt.
-
-&function_begin_B("OPENSSL_far_spin");
-	&pushf	();
-	&pop	("eax")
-	&bt	("eax",9);
-	&jnc	(&label("nospin"));	# interrupts are disabled
-
-	&mov	("eax",&DWP(4,"esp"));
-	&mov	("ecx",&DWP(8,"esp"));
-	&data_word (0x90d88e1e);	# push %ds, mov %eax,%ds
-	&xor	("eax","eax");
-	&mov	("edx",&DWP(0,"ecx"));
-	&jmp	(&label("spin"));
-
-	&align	(16);
-&set_label("spin");
-	&inc	("eax");
-	&cmp	("edx",&DWP(0,"ecx"));
-	&je	(&label("spin"));
-
-	&data_word (0x1f909090);	# pop	%ds
-	&ret	();
-
-&set_label("nospin");
-	&xor	("eax","eax");
-	&xor	("edx","edx");
-	&ret	();
-&function_end_B("OPENSSL_far_spin");
-
-&function_begin_B("OPENSSL_wipe_cpu","EXTRN\t_OPENSSL_ia32cap_P:DWORD");
-	&xor	("eax","eax");
-	&xor	("edx","edx");
-	&picmeup("ecx","OPENSSL_ia32cap_P");
-	&mov	("ecx",&DWP(0,"ecx"));
-	&bt	(&DWP(0,"ecx"),1);
-	&jnc	(&label("no_x87"));
-	if ($sse2) {
-		&bt	(&DWP(0,"ecx"),26);
-		&jnc	(&label("no_sse2"));
-		&pxor	("xmm0","xmm0");
-		&pxor	("xmm1","xmm1");
-		&pxor	("xmm2","xmm2");
-		&pxor	("xmm3","xmm3");
-		&pxor	("xmm4","xmm4");
-		&pxor	("xmm5","xmm5");
-		&pxor	("xmm6","xmm6");
-		&pxor	("xmm7","xmm7");
-	&set_label("no_sse2");
-	}
-	# just a bunch of fldz to zap the fp/mm bank followed by finit...
-	&data_word(0xeed9eed9,0xeed9eed9,0xeed9eed9,0xeed9eed9,0x90e3db9b);
-&set_label("no_x87");
-	&lea	("eax",&DWP(4,"esp"));
-	&ret	();
-&function_end_B("OPENSSL_wipe_cpu");
-
-&function_begin_B("OPENSSL_atomic_add");
-	&mov	("edx",&DWP(4,"esp"));	# fetch the pointer, 1st arg
-	&mov	("ecx",&DWP(8,"esp"));	# fetch the increment, 2nd arg
-	&push	("ebx");
-	&nop	();
-	&mov	("eax",&DWP(0,"edx"));
-&set_label("spin");
-	&lea	("ebx",&DWP(0,"eax","ecx"));
-	&nop	();
-	&data_word(0x1ab10ff0);	# lock;	cmpxchg	%ebx,(%edx)	# %eax is envolved and is always reloaded
-	&jne	(&label("spin"));
-	&mov	("eax","ebx");	# OpenSSL expects the new value
-	&pop	("ebx");
-	&ret	();
-&function_end_B("OPENSSL_atomic_add");
-
-# This function can become handy under Win32 in situations when
-# we don't know which calling convention, __stdcall or __cdecl(*),
-# indirect callee is using. In C it can be deployed as
-#
-#ifdef OPENSSL_CPUID_OBJ
-#	type OPENSSL_indirect_call(void *f,...);
-#	...
-#	OPENSSL_indirect_call(func,[up to $max arguments]);
-#endif
-#
-# (*)	it's designed to work even for __fastcall if number of
-#	arguments is 1 or 2!
-&function_begin_B("OPENSSL_indirect_call");
-	{
-	my $i,$max=7;		# $max has to be chosen as 4*n-1
-				# in order to preserve eventual
-				# stack alignment
-	&push	("ebp");
-	&mov	("ebp","esp");
-	&sub	("esp",$max*4);
-	&mov	("ecx",&DWP(12,"ebp"));
-	&mov	(&DWP(0,"esp"),"ecx");
-	&mov	("edx",&DWP(16,"ebp"));
-	&mov	(&DWP(4,"esp"),"edx");
-	for($i=2;$i<$max;$i++)
-		{
-		# Some copies will be redundant/bogus...
-		&mov	("eax",&DWP(12+$i*4,"ebp"));
-		&mov	(&DWP(0+$i*4,"esp"),"eax");
-		}
-	&call_ptr	(&DWP(8,"ebp"));# make the call...
-	&mov	("esp","ebp");	# ... and just restore the stack pointer
-				# without paying attention to what we called,
-				# (__cdecl *func) or (__stdcall *one).
-	&pop	("ebp");
-	&ret	();
-	}
-&function_end_B("OPENSSL_indirect_call");
-
-&initseg("OPENSSL_cpuid_setup");
-
-&asm_finish();