diff options
Diffstat (limited to 'cvmx-shared-linux-n32.ld')
| -rw-r--r-- | cvmx-shared-linux-n32.ld | 307 |
1 files changed, 307 insertions, 0 deletions
diff --git a/cvmx-shared-linux-n32.ld b/cvmx-shared-linux-n32.ld new file mode 100644 index 000000000000..39b7afc5c8dd --- /dev/null +++ b/cvmx-shared-linux-n32.ld @@ -0,0 +1,307 @@ +/***********************license start*************** + * Copyright (c) 2003-2010 Cavium Inc. (support@cavium.com). All rights + * reserved. + * + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions are + * met: + * + * * Redistributions of source code must retain the above copyright + * notice, this list of conditions and the following disclaimer. + * + * * Redistributions in binary form must reproduce the above + * copyright notice, this list of conditions and the following + * disclaimer in the documentation and/or other materials provided + * with the distribution. + + * * Neither the name of Cavium Inc. nor the names of + * its contributors may be used to endorse or promote products + * derived from this software without specific prior written + * permission. + + * This Software, including technical data, may be subject to U.S. export control + * laws, including the U.S. Export Administration Act and its associated + * regulations, and may be subject to export or import regulations in other + * countries. + + * TO THE MAXIMUM EXTENT PERMITTED BY LAW, THE SOFTWARE IS PROVIDED "AS IS" + * AND WITH ALL FAULTS AND CAVIUM INC. MAKES NO PROMISES, REPRESENTATIONS OR + * WARRANTIES, EITHER EXPRESS, IMPLIED, STATUTORY, OR OTHERWISE, WITH RESPECT TO + * THE SOFTWARE, INCLUDING ITS CONDITION, ITS CONFORMITY TO ANY REPRESENTATION OR + * DESCRIPTION, OR THE EXISTENCE OF ANY LATENT OR PATENT DEFECTS, AND CAVIUM + * SPECIFICALLY DISCLAIMS ALL IMPLIED (IF ANY) WARRANTIES OF TITLE, + * MERCHANTABILITY, NONINFRINGEMENT, FITNESS FOR A PARTICULAR PURPOSE, LACK OF + * VIRUSES, ACCURACY OR COMPLETENESS, QUIET ENJOYMENT, QUIET POSSESSION OR + * CORRESPONDENCE TO DESCRIPTION. THE ENTIRE RISK ARISING OUT OF USE OR + * PERFORMANCE OF THE SOFTWARE LIES WITH YOU. + ***********************license end**************************************/ + + + + + + +/* + * This was created from a template supplied by GNU binutils. + * Copyright (C) 2005 Cavium Inc. + */ + +/** + * @file + * This linker script for use in building simple executive application to run + * under Linux in userspace. The important difference from a standard Linux + * binary is the addition of the ".cvmx_shared" memory section. This script + * adds two symbols __cvmx_shared_start and __cvmx_shared_end before and after + * the CVMX_SHARED data. These are used by cvmx-app-init-linux.c to create a + * shared region across all application processes. + * + * The original template for this files was: + * ${OCTEON_ROOT}/tools/mips64-octeon-linux-gnu/lib/ldscripts/elf32btsmipn32.x + */ +OUTPUT_FORMAT("elf32-ntradbigmips", "elf32-ntradbigmips", + "elf32-ntradlittlemips") +OUTPUT_ARCH(mips) +ENTRY(__start) +SEARCH_DIR("${OCTEON_ROOT}/tools/mips64-octeon-linux-gnu/lib"); +SECTIONS +{ + /* Read-only sections, merged into text segment: */ + PROVIDE (__executable_start = 0x10000000); . = 0x10000000 + SIZEOF_HEADERS; + .interp : { *(.interp) } + .reginfo : { *(.reginfo) } + .note.gnu.build-id : { *(.note.gnu.build-id) } + .dynamic : { *(.dynamic) } + .hash : { *(.hash) } + .gnu.hash : { *(.gnu.hash) } + .dynsym : { *(.dynsym) } + .dynstr : { *(.dynstr) } + .gnu.version : { *(.gnu.version) } + .gnu.version_d : { *(.gnu.version_d) } + .gnu.version_r : { *(.gnu.version_r) } + .rel.init : { *(.rel.init) } + .rela.init : { *(.rela.init) } + .rel.text : { *(.rel.text .rel.text.* .rel.gnu.linkonce.t.*) } + .rela.text : { *(.rela.text .rela.text.* .rela.gnu.linkonce.t.*) } + .rel.fini : { *(.rel.fini) } + .rela.fini : { *(.rela.fini) } + .rel.rodata : { *(.rel.rodata .rel.rodata.* .rel.gnu.linkonce.r.*) } + .rela.rodata : { *(.rela.rodata .rela.rodata.* .rela.gnu.linkonce.r.*) } + .rel.data.rel.ro : { *(.rel.data.rel.ro* .rel.gnu.linkonce.d.rel.ro.*) } + .rela.data.rel.ro : { *(.rela.data.rel.ro* .rela.gnu.linkonce.d.rel.ro.*) } + .rel.data : { *(.rel.data .rel.data.* .rel.gnu.linkonce.d.*) } + .rela.data : { *(.rela.data .rela.data.* .rela.gnu.linkonce.d.*) } + .rel.tdata : { *(.rel.tdata .rel.tdata.* .rel.gnu.linkonce.td.*) } + .rela.tdata : { *(.rela.tdata .rela.tdata.* .rela.gnu.linkonce.td.*) } + .rel.tbss : { *(.rel.tbss .rel.tbss.* .rel.gnu.linkonce.tb.*) } + .rela.tbss : { *(.rela.tbss .rela.tbss.* .rela.gnu.linkonce.tb.*) } + .rel.ctors : { *(.rel.ctors) } + .rela.ctors : { *(.rela.ctors) } + .rel.dtors : { *(.rel.dtors) } + .rela.dtors : { *(.rela.dtors) } + .rel.got : { *(.rel.got) } + .rela.got : { *(.rela.got) } + .rel.dyn : { *(.rel.dyn) } + .rel.sdata : { *(.rel.sdata .rel.sdata.* .rel.gnu.linkonce.s.*) } + .rela.sdata : { *(.rela.sdata .rela.sdata.* .rela.gnu.linkonce.s.*) } + .rel.sbss : { *(.rel.sbss .rel.sbss.* .rel.gnu.linkonce.sb.*) } + .rela.sbss : { *(.rela.sbss .rela.sbss.* .rela.gnu.linkonce.sb.*) } + .rel.sdata2 : { *(.rel.sdata2 .rel.sdata2.* .rel.gnu.linkonce.s2.*) } + .rela.sdata2 : { *(.rela.sdata2 .rela.sdata2.* .rela.gnu.linkonce.s2.*) } + .rel.sbss2 : { *(.rel.sbss2 .rel.sbss2.* .rel.gnu.linkonce.sb2.*) } + .rela.sbss2 : { *(.rela.sbss2 .rela.sbss2.* .rela.gnu.linkonce.sb2.*) } + .rel.bss : { *(.rel.bss .rel.bss.* .rel.gnu.linkonce.b.*) } + .rela.bss : { *(.rela.bss .rela.bss.* .rela.gnu.linkonce.b.*) } + .rel.plt : { *(.rel.plt) } + .rela.plt : { *(.rela.plt) } + .init : + { + KEEP (*(.init)) + } =0 + .plt : { *(.plt) } + .text : + { + _ftext = . ; + *(.text .stub .text.* .gnu.linkonce.t.*) + /* .gnu.warning sections are handled specially by elf32.em. */ + *(.gnu.warning) + *(.mips16.fn.*) *(.mips16.call.*) + } =0 + .fini : + { + KEEP (*(.fini)) + } =0 + PROVIDE (__etext = .); + PROVIDE (_etext = .); + PROVIDE (etext = .); + .rodata : { *(.rodata .rodata.* .gnu.linkonce.r.*) } + .rodata1 : { *(.rodata1) } + .sdata2 : + { + *(.sdata2 .sdata2.* .gnu.linkonce.s2.*) + } + .sbss2 : { *(.sbss2 .sbss2.* .gnu.linkonce.sb2.*) } + .eh_frame_hdr : { *(.eh_frame_hdr) } + .eh_frame : ONLY_IF_RO { KEEP (*(.eh_frame)) } + .gcc_except_table : ONLY_IF_RO { *(.gcc_except_table .gcc_except_table.*) } + /* Adjust the address for the data segment. We want to adjust up to + the same address within the page on the next page up. */ + . = ALIGN (CONSTANT (MAXPAGESIZE)) - ((CONSTANT (MAXPAGESIZE) - .) & (CONSTANT (MAXPAGESIZE) - 1)); . = DATA_SEGMENT_ALIGN (CONSTANT (MAXPAGESIZE), CONSTANT (COMMONPAGESIZE)); + /* Exception handling */ + .eh_frame : ONLY_IF_RW { KEEP (*(.eh_frame)) } + .gcc_except_table : ONLY_IF_RW { *(.gcc_except_table .gcc_except_table.*) } + /* Thread Local Storage sections */ + .tdata : { *(.tdata .tdata.* .gnu.linkonce.td.*) } + .tbss : { *(.tbss .tbss.* .gnu.linkonce.tb.*) *(.tcommon) } + .preinit_array : + { + PROVIDE_HIDDEN (__preinit_array_start = .); + KEEP (*(.preinit_array)) + PROVIDE_HIDDEN (__preinit_array_end = .); + } + .init_array : + { + PROVIDE_HIDDEN (__init_array_start = .); + KEEP (*(SORT(.init_array.*))) + KEEP (*(.init_array)) + PROVIDE_HIDDEN (__init_array_end = .); + } + .fini_array : + { + PROVIDE_HIDDEN (__fini_array_start = .); + KEEP (*(.fini_array)) + KEEP (*(SORT(.fini_array.*))) + PROVIDE_HIDDEN (__fini_array_end = .); + } + .ctors : + { + /* gcc uses crtbegin.o to find the start of + the constructors, so we make sure it is + first. Because this is a wildcard, it + doesn't matter if the user does not + actually link against crtbegin.o; the + linker won't look for a file to match a + wildcard. The wildcard also means that it + doesn't matter which directory crtbegin.o + is in. */ + KEEP (*crtbegin.o(.ctors)) + KEEP (*crtbegin?.o(.ctors)) + /* We don't want to include the .ctor section from + the crtend.o file until after the sorted ctors. + The .ctor section from the crtend file contains the + end of ctors marker and it must be last */ + KEEP (*(EXCLUDE_FILE (*crtend.o *crtend?.o ) .ctors)) + KEEP (*(SORT(.ctors.*))) + KEEP (*(.ctors)) + } + .dtors : + { + KEEP (*crtbegin.o(.dtors)) + KEEP (*crtbegin?.o(.dtors)) + KEEP (*(EXCLUDE_FILE (*crtend.o *crtend?.o ) .dtors)) + KEEP (*(SORT(.dtors.*))) + KEEP (*(.dtors)) + } + .jcr : { KEEP (*(.jcr)) } + .data.rel.ro : { *(.data.rel.ro.local* .gnu.linkonce.d.rel.ro.local.*) *(.data.rel.ro* .gnu.linkonce.d.rel.ro.*) } + . = DATA_SEGMENT_RELRO_END (0, .); + .data : + { + _fdata = . ; + *(.data .data.* .gnu.linkonce.d.*) + SORT(CONSTRUCTORS) + } + .data1 : { *(.data1) } + .got.plt : { *(.got.plt) } + . = .; + _gp = ALIGN(16) + 0x7ff0; + .got : { *(.got) } + /* We want the small data sections together, so single-instruction offsets + can access them all, and initialized data all before uninitialized, so + we can shorten the on-disk segment size. */ + .sdata : + { + *(.sdata .sdata.* .gnu.linkonce.s.*) + } + .lit8 : { *(.lit8) } + .lit4 : { *(.lit4) } + .srdata : { *(.srdata) } + + . = ALIGN (0x10000); + __cvmx_shared_start = .; + .cvmx_shared : {*(.cvmx_shared .cvmx_shared.linkonce.*)} + .cvmx_shared_bss : { *(.cvmx_shared_bss .cvmx_shared_bss.linkonce.*) } + . = ALIGN (0x10000); + __cvmx_shared_end = .; + + _edata = .; PROVIDE (edata = .); + __bss_start = .; + _fbss = .; + .sbss : + { + PROVIDE (__sbss_start = .); + PROVIDE (___sbss_start = .); + *(.dynsbss) + *(.sbss .sbss.* .gnu.linkonce.sb.*) + *(.scommon) + PROVIDE (__sbss_end = .); + PROVIDE (___sbss_end = .); + } + .bss : + { + *(.dynbss) + *(.bss .bss.* .gnu.linkonce.b.*) + *(COMMON) + /* Align here to ensure that the .bss section occupies space up to + _end. Align after .bss to ensure correct alignment even if the + .bss section disappears because there are no input sections. + FIXME: Why do we need it? When there is no .bss section, we don't + pad the .data section. */ + . = ALIGN(. != 0 ? 32 / 8 : 1); + } + . = ALIGN(32 / 8); + . = ALIGN(32M); /* RBF added alignment of data */ + .cvmx_shared : { *(.cvmx_shared) } + _end = .; PROVIDE (end = .); + . = DATA_SEGMENT_END (.); + /* Stabs debugging sections. */ + .stab 0 : { *(.stab) } + .stabstr 0 : { *(.stabstr) } + .stab.excl 0 : { *(.stab.excl) } + .stab.exclstr 0 : { *(.stab.exclstr) } + .stab.index 0 : { *(.stab.index) } + .stab.indexstr 0 : { *(.stab.indexstr) } + .comment 0 : { *(.comment) } + /* DWARF debug sections. + Symbols in the DWARF debugging sections are relative to the beginning + of the section so we begin them at 0. */ + /* DWARF 1 */ + .debug 0 : { *(.debug) } + .line 0 : { *(.line) } + /* GNU DWARF 1 extensions */ + .debug_srcinfo 0 : { *(.debug_srcinfo) } + .debug_sfnames 0 : { *(.debug_sfnames) } + /* DWARF 1.1 and DWARF 2 */ + .debug_aranges 0 : { *(.debug_aranges) } + .debug_pubnames 0 : { *(.debug_pubnames) } + /* DWARF 2 */ + .debug_info 0 : { *(.debug_info .gnu.linkonce.wi.*) } + .debug_abbrev 0 : { *(.debug_abbrev) } + .debug_line 0 : { *(.debug_line) } + .debug_frame 0 : { *(.debug_frame) } + .debug_str 0 : { *(.debug_str) } + .debug_loc 0 : { *(.debug_loc) } + .debug_macinfo 0 : { *(.debug_macinfo) } + /* SGI/MIPS DWARF 2 extensions */ + .debug_weaknames 0 : { *(.debug_weaknames) } + .debug_funcnames 0 : { *(.debug_funcnames) } + .debug_typenames 0 : { *(.debug_typenames) } + .debug_varnames 0 : { *(.debug_varnames) } + /* DWARF 3 */ + .debug_pubtypes 0 : { *(.debug_pubtypes) } + .debug_ranges 0 : { *(.debug_ranges) } + .gnu.attributes 0 : { KEEP (*(.gnu.attributes)) } + .gptab.sdata : { *(.gptab.data) *(.gptab.sdata) } + .gptab.sbss : { *(.gptab.bss) *(.gptab.sbss) } + /DISCARD/ : { *(.note.GNU-stack) *(.gnu_debuglink) } +} |