diff options
Diffstat (limited to 'doc/html/man/curs_color.3x.html')
-rw-r--r-- | doc/html/man/curs_color.3x.html | 285 |
1 files changed, 0 insertions, 285 deletions
diff --git a/doc/html/man/curs_color.3x.html b/doc/html/man/curs_color.3x.html deleted file mode 100644 index 39a73184fccb..000000000000 --- a/doc/html/man/curs_color.3x.html +++ /dev/null @@ -1,285 +0,0 @@ -<!DOCTYPE HTML PUBLIC "-//IETF//DTD HTML 2.0//EN"> -<!-- - **************************************************************************** - * Copyright (c) 1998-2009,2010 Free Software Foundation, Inc. * - * * - * Permission is hereby granted, free of charge, to any person obtaining a * - * copy of this software and associated documentation files (the * - * "Software"), to deal in the Software without restriction, including * - * without limitation the rights to use, copy, modify, merge, publish, * - * distribute, distribute with modifications, sublicense, and/or sell * - * copies of the Software, and to permit persons to whom the Software is * - * furnished to do so, subject to the following conditions: * - * * - * The above copyright notice and this permission notice shall be included * - * in all copies or substantial portions of the Software. * - * * - * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS * - * OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF * - * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. * - * IN NO EVENT SHALL THE ABOVE COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, * - * DAMAGES OR OTHER LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR * - * OTHERWISE, ARISING FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR * - * THE USE OR OTHER DEALINGS IN THE SOFTWARE. * - * * - * Except as contained in this notice, the name(s) of the above copyright * - * holders shall not be used in advertising or otherwise to promote the * - * sale, use or other dealings in this Software without prior written * - * authorization. * - **************************************************************************** - * @Id: curs_color.3x,v 1.35 2010/12/20 00:50:58 tom Exp @ ---> -<HTML> -<HEAD> -<TITLE>curs_color 3x</TITLE> -<link rev=made href="mailto:bug-ncurses@gnu.org"> -<meta http-equiv="Content-Type" content="text/html; charset=iso-8859-1"> -</HEAD> -<BODY> -<H1>curs_color 3x</H1> -<HR> -<PRE> -<!-- Manpage converted by man2html 3.0.1 --> -<STRONG><A HREF="curs_color.3x.html">curs_color(3x)</A></STRONG> <STRONG><A HREF="curs_color.3x.html">curs_color(3x)</A></STRONG> - - - - -</PRE> -<H2>NAME</H2><PRE> - <STRONG>start_color</STRONG>, <STRONG>init_pair</STRONG>, <STRONG>init_color</STRONG>, <STRONG>has_colors</STRONG>, - <STRONG>can_change_color</STRONG>, <STRONG>color_content</STRONG>, <STRONG>pair_content</STRONG>, <STRONG>COLOR_PAIR</STRONG> - - <STRONG>curses</STRONG> color manipulation routines - - -</PRE> -<H2>SYNOPSIS</H2><PRE> - <STRONG>#</STRONG> <STRONG>include</STRONG> <STRONG><curses.h></STRONG> - - <STRONG>int</STRONG> <STRONG>start_color(void);</STRONG> - <STRONG>int</STRONG> <STRONG>init_pair(short</STRONG> <STRONG>pair,</STRONG> <STRONG>short</STRONG> <STRONG>f,</STRONG> <STRONG>short</STRONG> <STRONG>b);</STRONG> - <STRONG>int</STRONG> <STRONG>init_color(short</STRONG> <STRONG>color,</STRONG> <STRONG>short</STRONG> <STRONG>r,</STRONG> <STRONG>short</STRONG> <STRONG>g,</STRONG> <STRONG>short</STRONG> <STRONG>b);</STRONG> - <STRONG>bool</STRONG> <STRONG>has_colors(void);</STRONG> - <STRONG>bool</STRONG> <STRONG>can_change_color(void);</STRONG> - <STRONG>int</STRONG> <STRONG>color_content(short</STRONG> <STRONG>color,</STRONG> <STRONG>short</STRONG> <STRONG>*r,</STRONG> <STRONG>short</STRONG> <STRONG>*g,</STRONG> <STRONG>short</STRONG> - <STRONG>*b);</STRONG> - <STRONG>int</STRONG> <STRONG>pair_content(short</STRONG> <STRONG>pair,</STRONG> <STRONG>short</STRONG> <STRONG>*f,</STRONG> <STRONG>short</STRONG> <STRONG>*b);</STRONG> - - -</PRE> -<H2>DESCRIPTION</H2><PRE> - <STRONG>Overview</STRONG> - <STRONG>curses</STRONG> support color attributes on terminals with that ca- - pability. To use these routines <STRONG>start_color</STRONG> must be - called, usually right after <STRONG>initscr</STRONG>. Colors are always - used in pairs (referred to as color-pairs). A color-pair - consists of a foreground color (for characters) and a - background color (for the blank field on which the charac- - ters are displayed). A programmer initializes a color- - pair with the routine <STRONG>init_pair</STRONG>. After it has been ini- - tialized, <STRONG>COLOR_PAIR</STRONG>(<EM>n</EM>), a macro defined in <STRONG><curses.h></STRONG>, - can be used as a new video attribute. - - If a terminal is capable of redefining colors, the pro- - grammer can use the routine <STRONG>init_color</STRONG> to change the defi- - nition of a color. The routines <STRONG>has_colors</STRONG> and - <STRONG>can_change_color</STRONG> return <STRONG>TRUE</STRONG> or <STRONG>FALSE</STRONG>, depending on - whether the terminal has color capabilities and whether - the programmer can change the colors. The routine <STRONG>col-</STRONG> - <STRONG>or_content</STRONG> allows a programmer to extract the amounts of - red, green, and blue components in an initialized color. - The routine <STRONG>pair_content</STRONG> allows a programmer to find out - how a given color-pair is currently defined. - - <STRONG>Routine</STRONG> <STRONG>Descriptions</STRONG> - The <STRONG>start_color</STRONG> routine requires no arguments. It must be - called if the programmer wants to use colors, and before - any other color manipulation routine is called. It is - good practice to call this routine right after <STRONG>initscr</STRONG>. - <STRONG>start_color</STRONG> initializes eight basic colors (black, red, - green, yellow, blue, magenta, cyan, and white), and two - global variables, <STRONG>COLORS</STRONG> and <STRONG>COLOR_PAIRS</STRONG> (respectively - defining the maximum number of colors and color-pairs the - terminal can support). It also restores the colors on the - terminal to the values they had when the terminal was just - turned on. - - The <STRONG>init_pair</STRONG> routine changes the definition of a color- - pair. It takes three arguments: the number of the color- - pair to be changed, the foreground color number, and the - background color number. For portable applications: - - <STRONG>o</STRONG> The value of the first argument must be between <STRONG>1</STRONG> and - <STRONG>COLOR_PAIRS-1</STRONG>, except that if default colors are used - (see <STRONG>use_default_colors</STRONG>) the upper limit is adjusted - to allow for extra pairs which use a default color in - foreground and/or background. - - <STRONG>o</STRONG> The value of the second and third arguments must be - between 0 and <STRONG>COLORS</STRONG>. Color pair 0 is assumed to be - white on black, but is actually whatever the terminal - implements before color is initialized. It cannot be - modified by the application. - - If the color-pair was previously initialized, the screen - is refreshed and all occurrences of that color-pair are - changed to the new definition. - - As an extension, ncurses allows you to set color pair 0 - via the <STRONG>assume_default_colors</STRONG> routine, or to specify the - use of default colors (color number <STRONG>-1</STRONG>) if you first in- - voke the <STRONG>use_default_colors</STRONG> routine. - - The <STRONG>init_color</STRONG> routine changes the definition of a color. - It takes four arguments: the number of the color to be - changed followed by three RGB values (for the amounts of - red, green, and blue components). The value of the first - argument must be between <STRONG>0</STRONG> and <STRONG>COLORS</STRONG>. (See the section - <STRONG>Colors</STRONG> for the default color index.) Each of the last - three arguments must be a value between 0 and 1000. When - <STRONG>init_color</STRONG> is used, all occurrences of that color on the - screen immediately change to the new definition. - - The <STRONG>has_colors</STRONG> routine requires no arguments. It returns - <STRONG>TRUE</STRONG> if the terminal can manipulate colors; otherwise, it - returns <STRONG>FALSE</STRONG>. This routine facilitates writing terminal- - independent programs. For example, a programmer can use - it to decide whether to use color or some other video at- - tribute. - - The <STRONG>can_change_color</STRONG> routine requires no arguments. It - returns <STRONG>TRUE</STRONG> if the terminal supports colors and can - change their definitions; other, it returns <STRONG>FALSE</STRONG>. This - routine facilitates writing terminal-independent programs. - - The <STRONG>color_content</STRONG> routine gives programmers a way to find - the intensity of the red, green, and blue (RGB) components - in a color. It requires four arguments: the color number, - and three addresses of <STRONG>short</STRONG>s for storing the information - about the amounts of red, green, and blue components in - the given color. The value of the first argument must be - between 0 and <STRONG>COLORS</STRONG>. The values that are stored at the - addresses pointed to by the last three arguments are be- - tween 0 (no component) and 1000 (maximum amount of compo- - nent). - - The <STRONG>pair_content</STRONG> routine allows programmers to find out - what colors a given color-pair consists of. It requires - three arguments: the color-pair number, and two addresses - of <STRONG>short</STRONG>s for storing the foreground and the background - color numbers. The value of the first argument must be - between 1 and <STRONG>COLOR_PAIRS-1</STRONG>. The values that are stored - at the addresses pointed to by the second and third argu- - ments are between 0 and <STRONG>COLORS</STRONG>. - - <STRONG>Colors</STRONG> - In <STRONG><curses.h></STRONG> the following macros are defined. These are - the default colors. <STRONG>curses</STRONG> also assumes that <STRONG>COLOR_BLACK</STRONG> - is the default background color for all terminals. - - <STRONG>COLOR_BLACK</STRONG> - <STRONG>COLOR_RED</STRONG> - <STRONG>COLOR_GREEN</STRONG> - <STRONG>COLOR_YELLOW</STRONG> - <STRONG>COLOR_BLUE</STRONG> - <STRONG>COLOR_MAGENTA</STRONG> - <STRONG>COLOR_CYAN</STRONG> - <STRONG>COLOR_WHITE</STRONG> - - -</PRE> -<H2>RETURN VALUE</H2><PRE> - The routines <STRONG>can_change_color()</STRONG> and <STRONG>has_colors()</STRONG> return - <STRONG>TRUE</STRONG> or <STRONG>FALSE</STRONG>. - - All other routines return the integer <STRONG>ERR</STRONG> upon failure and - an <STRONG>OK</STRONG> (SVr4 specifies only "an integer value other than - <STRONG>ERR</STRONG>") upon successful completion. - - X/Open defines no error conditions. This implementation - will return <STRONG>ERR</STRONG> on attempts to use color values outside - the range 0 to COLORS-1 (except for the default colors ex- - tension), or use color pairs outside the range 0 to COL- - OR_PAIRS-1. Color values used in <STRONG>init_color</STRONG> must be in - the range 0 to 1000. An error is returned from all func- - tions if the terminal has not been initialized. An error - is returned from secondary functions such as <STRONG>init_pair</STRONG> if - <STRONG>start_color</STRONG> was not called. - - <STRONG>init_color</STRONG> - returns an error if the terminal does not support - this feature, e.g., if the <EM>initialize</EM><STRONG>_</STRONG><EM>color</EM> capa- - bility is absent from the terminal description. - - <STRONG>start_color</STRONG> - returns an error if the color table cannot be al- - located. - - -</PRE> -<H2>NOTES</H2><PRE> - In the <EM>ncurses</EM> implementation, there is a separate color - activation flag, color palette, color pairs table, and as- - sociated COLORS and COLOR_PAIRS counts for each screen; - the <STRONG>start_color</STRONG> function only affects the current screen. - The SVr4/XSI interface is not really designed with this in - mind, and historical implementations may use a single - shared color palette. - - Note that setting an implicit background color via a color - pair affects only character cells that a character write - operation explicitly touches. To change the background - color used when parts of a window are blanked by erasing - or scrolling operations, see <STRONG><A HREF="curs_bkgd.3x.html">curs_bkgd(3x)</A></STRONG>. - - Several caveats apply on 386 and 486 machines with VGA- - compatible graphics: - - <STRONG>o</STRONG> COLOR_YELLOW is actually brown. To get yellow, use - COLOR_YELLOW combined with the <STRONG>A_BOLD</STRONG> attribute. - - <STRONG>o</STRONG> The A_BLINK attribute should in theory cause the back- - ground to go bright. This often fails to work, and - even some cards for which it mostly works (such as the - Paradise and compatibles) do the wrong thing when you - try to set a bright "yellow" background (you get a - blinking yellow foreground instead). - - <STRONG>o</STRONG> Color RGB values are not settable. - - -</PRE> -<H2>PORTABILITY</H2><PRE> - This implementation satisfies XSI Curses's minimum maxi- - mums for <STRONG>COLORS</STRONG> and <STRONG>COLOR_PAIRS</STRONG>. - - The <STRONG>init_pair</STRONG> routine accepts negative values of fore- - ground and background color to support the <STRONG>use_de-</STRONG> - <STRONG>fault_colors</STRONG> extension, but only if that routine has been - first invoked. - - The assumption that <STRONG>COLOR_BLACK</STRONG> is the default background - color for all terminals can be modified using the <STRONG>as-</STRONG> - <STRONG>sume_default_colors</STRONG> extension. - - This implementation checks the pointers, e.g., for the - values returned by <STRONG>color_content</STRONG> and <STRONG>pair_content</STRONG>, and - will treat those as optional parameters when null. - - -</PRE> -<H2>SEE ALSO</H2><PRE> - <STRONG><A HREF="ncurses.3x.html">curses(3x)</A></STRONG>, <STRONG><A HREF="curs_initscr.3x.html">curs_initscr(3x)</A></STRONG>, <STRONG><A HREF="curs_attr.3x.html">curs_attr(3x)</A></STRONG>, <STRONG>curs_vari-</STRONG> - <STRONG><A HREF="curs_variables.3x.html">ables(3x)</A></STRONG>, <STRONG><A HREF="default_colors.3x.html">default_colors(3x)</A></STRONG> - - - - <STRONG><A HREF="curs_color.3x.html">curs_color(3x)</A></STRONG> -</PRE> -<HR> -<ADDRESS> -Man(1) output converted with -<a href="http://www.oac.uci.edu/indiv/ehood/man2html.html">man2html</a> -</ADDRESS> -</BODY> -</HTML> |