1 files changed, 213 insertions, 0 deletions
diff --git a/doc/man3/BIO_s_connect.pod b/doc/man3/BIO_s_connect.pod
new file mode 100644
index 000000000000..d5cc553f2508
--- /dev/null
+++ b/doc/man3/BIO_s_connect.pod
@@ -0,0 +1,213 @@
+=pod
+
+=head1 NAME
+
+BIO_set_conn_address, BIO_get_conn_address,
+BIO_s_connect, BIO_new_connect, BIO_set_conn_hostname, BIO_set_conn_port,
+BIO_set_conn_ip_family, BIO_get_conn_ip_family,
+BIO_get_conn_hostname, BIO_get_conn_port,
+BIO_set_nbio, BIO_do_connect - connect BIO
+
+=head1 SYNOPSIS
+
+ #include <openssl/bio.h>
+
+ const BIO_METHOD * BIO_s_connect(void);
+
+ BIO *BIO_new_connect(char *name);
+
+ long BIO_set_conn_hostname(BIO *b, char *name);
+ long BIO_set_conn_port(BIO *b, char *port);
+ long BIO_set_conn_address(BIO *b, BIO_ADDR *addr);
+ long BIO_set_conn_ip_family(BIO *b, long family);
+ const char *BIO_get_conn_hostname(BIO *b);
+ const char *BIO_get_conn_port(BIO *b);
+ const BIO_ADDR *BIO_get_conn_address(BIO *b);
+ const long BIO_get_conn_ip_family(BIO *b);
+
+ long BIO_set_nbio(BIO *b, long n);
+
+ int BIO_do_connect(BIO *b);
+
+=head1 DESCRIPTION
+
+BIO_s_connect() returns the connect BIO method. This is a wrapper
+round the platform's TCP/IP socket connection routines.
+
+Using connect BIOs, TCP/IP connections can be made and data
+transferred using only BIO routines. In this way any platform
+specific operations are hidden by the BIO abstraction.
+
+Read and write operations on a connect BIO will perform I/O
+on the underlying connection. If no connection is established
+and the port and hostname (see below) is set up properly then
+a connection is established first.
+
+Connect BIOs support BIO_puts() but not BIO_gets().
+
+If the close flag is set on a connect BIO then any active
+connection is shutdown and the socket closed when the BIO
+is freed.
+
+Calling BIO_reset() on a connect BIO will close any active
+connection and reset the BIO into a state where it can connect
+to the same host again.
+
+BIO_get_fd() places the underlying socket in B<c> if it is not NULL,
+it also returns the socket . If B<c> is not NULL it should be of
+type (int *).
+
+BIO_set_conn_hostname() uses the string B<name> to set the hostname.
+The hostname can be an IP address; if the address is an IPv6 one, it
+must be enclosed with brackets. The hostname can also include the
+port in the form hostname:port.
+
+BIO_set_conn_port() sets the port to B<port>. B<port> can be the
+numerical form or a string such as "http". A string will be looked
+up first using getservbyname() on the host platform but if that
+fails a standard table of port names will be used. This internal
+list is http, telnet, socks, https, ssl, ftp, and gopher.
+
+BIO_set_conn_address() sets the address and port information using
+a BIO_ADDR(3ssl).
+
+BIO_set_conn_ip_family() sets the IP family.
+
+BIO_get_conn_hostname() returns the hostname of the connect BIO or
+NULL if the BIO is initialized but no hostname is set.
+This return value is an internal pointer which should not be modified.
+
+BIO_get_conn_port() returns the port as a string.
+This return value is an internal pointer which should not be modified.
+
+BIO_get_conn_address() returns the address information as a BIO_ADDR.
+This return value is an internal pointer which should not be modified.
+
+BIO_get_conn_ip_family() returns the IP family of the connect BIO.
+
+BIO_set_nbio() sets the non blocking I/O flag to B<n>. If B<n> is
+zero then blocking I/O is set. If B<n> is 1 then non blocking I/O
+is set. Blocking I/O is the default. The call to BIO_set_nbio()
+should be made before the connection is established because
+non blocking I/O is set during the connect process.
+
+BIO_new_connect() combines BIO_new() and BIO_set_conn_hostname() into
+a single call: that is it creates a new connect BIO with B<name>.
+
+BIO_do_connect() attempts to connect the supplied BIO. It returns 1
+if the connection was established successfully. A zero or negative
+value is returned if the connection could not be established, the
+call BIO_should_retry() should be used for non blocking connect BIOs
+to determine if the call should be retried.
+
+=head1 NOTES
+
+If blocking I/O is set then a non positive return value from any
+I/O call is caused by an error condition, although a zero return
+will normally mean that the connection was closed.
+
+If the port name is supplied as part of the host name then this will
+override any value set with BIO_set_conn_port(). This may be undesirable
+if the application does not wish to allow connection to arbitrary
+ports. This can be avoided by checking for the presence of the ':'
+character in the passed hostname and either indicating an error or
+truncating the string at that point.
+
+The values returned by BIO_get_conn_hostname(), BIO_get_conn_address(),
+and BIO_get_conn_port() are updated when a connection attempt is made.
+Before any connection attempt the values returned are those set by the
+application itself.
+
+Applications do not have to call BIO_do_connect() but may wish to do
+so to separate the connection process from other I/O processing.
+
+If non blocking I/O is set then retries will be requested as appropriate.
+
+It addition to BIO_should_read() and BIO_should_write() it is also
+possible for BIO_should_io_special() to be true during the initial
+connection process with the reason BIO_RR_CONNECT. If this is returned
+then this is an indication that a connection attempt would block,
+the application should then take appropriate action to wait until
+the underlying socket has connected and retry the call.
+
+BIO_set_conn_hostname(), BIO_set_conn_port(), BIO_get_conn_hostname(),
+BIO_set_conn_address(), BIO_get_conn_port(), BIO_get_conn_address(),
+BIO_set_conn_ip_family(), BIO_get_conn_ip_family(),
+BIO_set_nbio(), and BIO_do_connect() are macros.
+
+=head1 RETURN VALUES
+
+BIO_s_connect() returns the connect BIO method.
+
+BIO_get_fd() returns the socket or -1 if the BIO has not
+been initialized.
+
+BIO_set_conn_address(), BIO_set_conn_port(), and BIO_set_conn_ip_family()
+always return 1.
+
+BIO_set_conn_hostname() returns 1 on success and 0 on failure.
+
+BIO_get_conn_address() returns the address information or NULL if none
+was set.
+
+BIO_get_conn_hostname() returns the connected hostname or NULL if
+none was set.
+
+BIO_get_conn_ip_family() returns the address family or -1 if none was set.
+
+BIO_get_conn_port() returns a string representing the connected
+port or NULL if not set.
+
+BIO_set_nbio() always returns 1.
+
+BIO_do_connect() returns 1 if the connection was successfully
+established and 0 or -1 if the connection failed.
+
+=head1 EXAMPLE
+
+This is example connects to a webserver on the local host and attempts
+to retrieve a page and copy the result to standard output.
+
+
+ BIO *cbio, *out;
+ int len;
+ char tmpbuf[1024];
+
+ cbio = BIO_new_connect("localhost:http");
+ out = BIO_new_fp(stdout, BIO_NOCLOSE);
+ if (BIO_do_connect(cbio) <= 0) {
+     fprintf(stderr, "Error connecting to server\n");
+     ERR_print_errors_fp(stderr);
+     exit(1);
+ }
+ BIO_puts(cbio, "GET / HTTP/1.0\n\n");
+ for (;;) {
+     len = BIO_read(cbio, tmpbuf, 1024);
+     if (len <= 0)
+         break;
+     BIO_write(out, tmpbuf, len);
+ }
+ BIO_free(cbio);
+ BIO_free(out);
+
+
+=head1 SEE ALSO
+
+L<BIO_ADDR(3)>
+
+=head1 HISTORY
+
+BIO_set_conn_int_port(), BIO_get_conn_int_port(), BIO_set_conn_ip(), and BIO_get_conn_ip()
+were removed in OpenSSL 1.1.0.
+Use BIO_set_conn_address() and BIO_get_conn_address() instead.
+
+=head1 COPYRIGHT
+
+Copyright 2000-2018 The OpenSSL Project Authors. All Rights Reserved.
+
+Licensed under the OpenSSL license (the "License").  You may not use
+this file except in compliance with the License.  You can obtain a copy
+in the file LICENSE in the source distribution or at
+L<https://www.openssl.org/source/license.html>.
+
+=cut