diff options
Diffstat (limited to 'gnu/usr.bin/gdb/doc/Makefile')
-rw-r--r-- | gnu/usr.bin/gdb/doc/Makefile | 340 |
1 files changed, 340 insertions, 0 deletions
diff --git a/gnu/usr.bin/gdb/doc/Makefile b/gnu/usr.bin/gdb/doc/Makefile new file mode 100644 index 000000000000..8cde5d4b5350 --- /dev/null +++ b/gnu/usr.bin/gdb/doc/Makefile @@ -0,0 +1,340 @@ +# This file was generated automatically by configure. Do not edit. +VPATH = . +links = +host_alias = i386-unknown-freebsd +host_cpu = i386 +host_vendor = unknown +host_os = freebsd +host_canonical = i386-unknown-freebsd +target_alias = i386-unknown-freebsd +target_cpu = i386 +target_vendor = unknown +target_os = freebsd +target_canonical = i386-unknown-freebsd +##Copyright (C) 1991, 1992 Free Software Foundation, Inc. + +# Makefile for GDB documentation. +# This file is part of GDB. + +# This program is free software; you can redistribute it and/or modify +# it under the terms of the GNU General Public License as published by +# the Free Software Foundation; either version 2 of the License, or +# (at your option) any later version. +# +# This program is distributed in the hope that it will be useful, +# but WITHOUT ANY WARRANTY; without even the implied warranty of +# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +# GNU General Public License for more details. +# +# You should have received a copy of the GNU General Public License +# along with this program; if not, write to the Free Software +# Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. + +srcdir = . + +prefix = /usr/gnu + +infodir = $(prefix)/info + +SHELL = /bin/sh + +INSTALL = install -c +INSTALL_PROGRAM = $(INSTALL) +INSTALL_DATA = $(INSTALL) + +# main GDB source directory +gdbdir = $(srcdir)/.. + +# where to find texinfo; GDB dist should include a recent one +TEXIDIR=${gdbdir}/../texinfo + +# where to find makeinfo, preferably one designed for texinfo-2 +MAKEINFO=makeinfo + +# where to find texi2roff, ditto +TEXI2ROFF=texi2roff + +# Where is the source dir for the READLINE library doc? +# Traditionally readline is in .. or . +READLINE_DIR = ${gdbdir}/../readline/doc + +SET_TEXINPUTS = TEXINPUTS=${TEXIDIR}:.:$(srcdir):$(READLINE_DIR):$$TEXINPUTS + +# There may be alternate predefined collections of switches to configure +# the GDB manual. Normally this is not done in synch with the software +# config system, since this choice tends to be independent; most people +# want a doc config of `all' for a generic manual, regardless of sw config. +DOC_CONFIG = all + +# This list of sed edits will edit the GDB reference card +# for what fonts and what papersize to use. +# By default (NO edits applied), the refcard uses: +# - Computer Modern (CM) fonts +# - US letter paper (8.5x11in) +# List some of the following files for alternative fonts and paper: +# a4rc.sed use A4 paper (297 x 210 mm) +# psrc.sed use PostScript fonts (Karl Berry short TeX names) +# lpsrc.sed use PostScript fonts (full PostScript names in TeX) +# e.g. for A4, Postscript: REFEDITS = a4rc.sed psrc.sed +# for A4, CM fonts: REFEDITS = a4rc.sed +# for US, PS fonts: REFEDITS = psrc.sed +# for default: +REFEDITS = + +# Don Knuth's TeX formatter +TEX = tex + +# auxiliary program for sorting Texinfo indices +TEXINDEX = texindex + +# Main GDB manual's source files +SFILES_INCLUDED = gdb-cfg.texi $(srcdir)/remote.texi + +SFILES_LOCAL = $(srcdir)/gdb.texinfo GDBvn.texi $(SFILES_INCLUDED) + +SFILES_DOC = $(SFILES_LOCAL) \ + $(READLINE_DIR)/rluser.texinfo $(READLINE_DIR)/inc-hist.texi + +#### Host, target, and site specific Makefile fragments come in here. +### + +all install: + +info: gdb.info gdbint.info stabs.info +dvi: gdb.dvi refcard.dvi gdbint.dvi +all-doc: gdb.info gdb.dvi refcard.dvi gdb-internals gdbint.dvi + +install-info: info + for i in *.info* ; do \ + $(INSTALL_DATA) $$i $(infodir)/$$i ; \ + done + +STAGESTUFF = *.info* gdb-all.texi GDBvn.texi + +# Copy the object files from a particular stage into a subdirectory. +stage1: force + -mkdir stage1 + -mv $(STAGESTUFF) stage1 + +stage2: force + -mkdir stage2 + -mv $(STAGESTUFF) stage2 + +stage3: force + -mkdir stage3 + -mv $(STAGESTUFF) stage3 + +against=stage2 + +comparison: force + for i in $(STAGESTUFF) ; do cmp $$i $(against)/$$i ; done + +de-stage1: force + -(cd stage1 ; mv -f * ..) + -rmdir stage1 + +de-stage2: force + -(cd stage2 ; mv -f * ..) + -rmdir stage2 + +de-stage3: force + -(cd stage3 ; mv -f * ..) + -rmdir stage3 + +clean-info: + rm -f gdb.info* gdbint.info* stabs.info* + +clean-dvi: + rm -f gdb.dvi refcard.dvi gdbint.dvi stabs.dvi sedref.dvi + +mostlyclean: clean-info clean-dvi + rm -f gdb.?? gdb.??? gdb.mm gdb.ms gdb.me + rm -f links2roff + rm -f refcard.ps lrefcard.ps refcard.log sedref.* *~ + rm -f gdbint.?? gdbint.??? stabs.?? stabs.??? + +clean: mostlyclean + rm -f GDBvn.texi rluser.texinfo inc-hist.texi + +distclean: clean + rm -f Makefile config.status + +realclean: distclean clean-dvi clean-info + +# GDB QUICK REFERENCE (dvi output) +refcard.dvi : refcard.tex $(REFEDITS) + if [ -z "$(REFEDITS)" ]; then \ + cp $(srcdir)/refcard.tex sedref.tex ; \ + else \ + echo > tmp.sed ; \ + for f in "$(REFEDITS)" ; do \ + cat $(srcdir)/$$f >>tmp.sed ; done ; \ + sed -f tmp.sed $(srcdir)/refcard.tex >sedref.tex ; \ + fi + $(SET_TEXINPUTS) $(TEX) sedref.tex + mv sedref.dvi refcard.dvi + rm -f sedref.log sedref.tex tmp.sed + +refcard.ps : refcard.dvi + dvips -t landscape refcard.dvi -o + +# File to record current GDB version number (copied from main dir Makefile.in) +GDBvn.texi : ${gdbdir}/Makefile.in + echo "@set GDBVN `sed <$(srcdir)/../Makefile.in -n 's/VERSION = //p'`" > ./GDBvn.new + mv GDBvn.new GDBvn.texi + +# Updated atomically +.PRECIOUS: GDBvn.texi + +# Choose configuration for GDB manual (normally `all'; normally not tied into +# `configure' script because most users prefer generic version of manual, +# not one for their binary config---which may not be specifically +# defined anyways). +gdb-cfg.texi: ${srcdir}/${DOC_CONFIG}-cfg.texi + ln -s ${srcdir}/${DOC_CONFIG}-cfg.texi gdb-cfg.texi || \ + ln ${srcdir}/${DOC_CONFIG}-cfg.texi gdb-cfg.texi || \ + cp ${srcdir}/${DOC_CONFIG}-cfg.texi gdb-cfg.texi + +# GDB MANUAL: texinfo source, using @set/@clear/@value/@ifset/@ifclear +# If your texinfo or makeinfo don't support these, get a new texinfo release +# +# The nonsense with GDBvn.texi gets this to run with both Sun and GNU make. +# Note that we can *generate* GDBvn.texi, but since we distribute one in the +# source directory for the benefit of people who *don't* use this makefile, +# VPATH will often tell make not to bother building it, because the one +# in the srcdir is up to date. (if not, then make should build one here). + +# GDB MANUAL: TeX dvi file +gdb.dvi: ${SFILES_DOC} + if [ ! -f ./GDBvn.texi ]; then \ + ln -s $(srcdir)/GDBvn.texi . || \ + ln $(srcdir)/GDBvn.texi . || \ + cp $(srcdir)/GDBvn.texi . ; else true; fi + $(SET_TEXINPUTS) $(TEX) gdb.texinfo + $(SET_TEXINPUTS) $(TEX) gdb.texinfo + $(TEXINDEX) gdb.?? + $(SET_TEXINPUTS) $(TEX) gdb.texinfo + rm -f gdb.?? gdb.log gdb.aux gdb.toc gdb.??s + +# GDB MANUAL: info file +# We're using texinfo2, and older makeinfo's may not be able to +# cope with all the markup. +gdb.info: ${SFILES_DOC} + $(MAKEINFO) -I ${READLINE_DIR} -I $(srcdir) -o ./gdb.info gdb.texinfo + +# GDB MANUAL: roff translations +# Try to use a recent texi2roff. v2 was put on prep in jan91. +# If you want an index, see texi2roff doc for postprocessing +# and add -i to texi2roff invocations below. +# Workarounds for texi2roff-2 (probably fixed in later texi2roff's, delete +# corresponding -e lines when later texi2roff's are current) +# + @ifinfo's deleted explicitly due to texi2roff-2 bug w nested constructs. +# + @c's deleted explicitly because texi2roff sees texinfo commands in them +# + @ (that's at-BLANK) not recognized by texi2roff, turned into blank +# + @alphaenumerate is ridiculously new, turned into @enumerate + +# texi2roff doesn't have a notion of include dirs, so we have to fake +# it out for gdb manual's include files---but only if not configured +# in main sourcedir. +links2roff: $(SFILES_INCLUDED) + if [ ! -f gdb.texinfo ]; then \ + ln -s $(SFILES_INCLUDED) . || \ + ln $(SFILES_INCLUDED) . || \ + cp $(SFILES_INCLUDED) . ; \ + fi + touch links2roff + +# "Readline" appendices. Get them also due to lack of includes, +# regardless of whether or not configuring in main sourcedir. +# @ftable removed due to bug in texi2roff-2; if your texi2roff +# is newer, try just ln or cp +rluser.texinfo: ${READLINE_DIR}/rluser.texinfo + sed -e 's/^@ftable/@table/g' \ + -e 's/^@end ftable/@end table/g' \ + ${READLINE_DIR}/rluser.texinfo > ./rluser.texinfo + +inc-hist.texi: ${READLINE_DIR}/inc-hist.texi + ln -s ${READLINE_DIR}/inc-hist.texi . || \ + ln ${READLINE_DIR}/inc-hist.texi . || \ + cp ${READLINE_DIR}/inc-hist.texi . + +# gdb manual suitable for [gtn]roff -me +gdb.me: $(SFILES_LOCAL) links2roff rluser.texinfo inc-hist.texi + sed -e '/\\input texinfo/d' \ + -e '/@c TEXI2ROFF-KILL/,/@c END TEXI2ROFF-KILL/d' \ + -e '/^@ifinfo/,/^@end ifinfo/d' \ + -e '/^@c /d' \ + -e 's/{.*,,/{/' \ + -e 's/@ / /g' \ + -e 's/^@alphaenumerate/@enumerate/g' \ + -e 's/^@end alphaenumerate/@end enumerate/g' \ + $(srcdir)/gdb.texinfo | \ + $(TEXI2ROFF) -me | \ + sed -e 's/---/\\(em/g' \ + >gdb.me + +# gdb manual suitable for [gtn]roff -ms +gdb.ms: $(SFILES_LOCAL) links2roff rluser.texinfo inc-hist.texi + sed -e '/\\input texinfo/d' \ + -e '/@c TEXI2ROFF-KILL/,/@c END TEXI2ROFF-KILL/d' \ + -e '/^@ifinfo/,/^@end ifinfo/d' \ + -e '/^@c /d' \ + -e 's/{.*,,/{/' \ + -e 's/@ / /g' \ + -e 's/^@alphaenumerate/@enumerate/g' \ + -e 's/^@end alphaenumerate/@end enumerate/g' \ + $(srcdir)/gdb.texinfo | \ + $(TEXI2ROFF) -ms | \ + sed -e 's/---/\\(em/g' \ + >gdb.ms + +# gdb manual suitable for [tn]roff -mm +# '@noindent's removed due to texi2roff-2 mm bug; if yours is newer, +# try leaving them in +gdb.mm: $(SFILES_LOCAL) links2roff rluser.texinfo inc-hist.texi + sed -e '/\\input texinfo/d' \ + -e '/@c TEXI2ROFF-KILL/,/@c END TEXI2ROFF-KILL/d' \ + -e '/^@ifinfo/,/^@end ifinfo/d' \ + -e '/^@c /d' \ + -e 's/{.*,,/{/' \ + -e '/@noindent/d' \ + -e 's/@ / /g' \ + -e 's/^@alphaenumerate/@enumerate/g' \ + -e 's/^@end alphaenumerate/@end enumerate/g' \ + $(srcdir)/gdb.texinfo | \ + $(TEXI2ROFF) -mm | \ + sed -e 's/---/\\(em/g' \ + >gdb.mm + +# GDB INTERNALS MANUAL: TeX dvi file +gdbint.dvi : gdbint.texinfo + $(SET_TEXINPUTS) $(TEX) gdbint.texinfo + $(TEXINDEX) gdbint.?? + $(SET_TEXINPUTS) $(TEX) gdbint.texinfo + rm -f gdbint.?? gdbint.aux gdbint.cps gdbint.fns gdbint.kys \ + gdbint.log gdbint.pgs gdbint.toc gdbint.tps gdbint.vrs + +# GDB INTERNALS MANUAL: info file +gdb-internals: gdbint.info + +gdbint.info: gdbint.texinfo + $(MAKEINFO) -o gdbint.info $(srcdir)/gdbint.texinfo + +stabs.info: stabs.texinfo + $(MAKEINFO) -o stabs.info $(srcdir)/stabs.texinfo + +# STABS DOCUMENTATION: TeX dvi file +stabs.dvi : stabs.texinfo + $(SET_TEXINPUTS) $(TEX) stabs.texinfo + $(TEXINDEX) stabs.?? + $(SET_TEXINPUTS) $(TEX) stabs.texinfo + rm -f stabs.?? stabs.aux stabs.cps stabs.fns stabs.kys \ + stabs.log stabs.pgs stabs.toc stabs.tps stabs.vrs + +stabs.ps: stabs.dvi + dvips -o stabs.ps stabs + +force: + +Makefile: $(srcdir)/Makefile.in $(host_makefile_frag) $(target_makefile_frag) + $(SHELL) ./config.status |