aboutsummaryrefslogtreecommitdiff
path: root/ld/scripttempl
diff options
context:
space:
mode:
Diffstat (limited to 'ld/scripttempl')
-rw-r--r--ld/scripttempl/armbpabi.sc10
-rw-r--r--ld/scripttempl/avr.sc36
-rw-r--r--ld/scripttempl/crisaout.sc10
-rw-r--r--ld/scripttempl/elf.sc52
-rw-r--r--ld/scripttempl/elf32cr16.sc175
-rw-r--r--ld/scripttempl/elf32crx.sc12
-rw-r--r--ld/scripttempl/elf32sh-symbian.sc13
-rw-r--r--ld/scripttempl/elf_chaos.sc13
-rw-r--r--ld/scripttempl/elfd10v.sc10
-rw-r--r--ld/scripttempl/elfd30v.sc10
-rw-r--r--ld/scripttempl/elfi370.sc3
-rw-r--r--ld/scripttempl/elfxtensa.sc127
-rw-r--r--ld/scripttempl/iq2000.sc10
-rw-r--r--ld/scripttempl/mep.sc446
-rw-r--r--ld/scripttempl/mmo.sc10
-rw-r--r--ld/scripttempl/pep.sc272
-rw-r--r--ld/scripttempl/xstormy16.sc10
17 files changed, 1117 insertions, 102 deletions
diff --git a/ld/scripttempl/armbpabi.sc b/ld/scripttempl/armbpabi.sc
index c8d1bd4ba595..28bad1c4623b 100644
--- a/ld/scripttempl/armbpabi.sc
+++ b/ld/scripttempl/armbpabi.sc
@@ -77,14 +77,15 @@ CTOR=".ctors ${CONSTRUCTING-0} :
doesn't matter which directory crtbegin.o
is in. */
- KEEP (*crtbegin*.o(.ctors))
+ KEEP (*crtbegin.o(.ctors))
+ KEEP (*crtbegin?.o(.ctors))
/* We don't want to include the .ctor section from
the crtend.o file until after the sorted ctors.
The .ctor section from the crtend file contains the
end of ctors marker and it must be last */
- KEEP (*(EXCLUDE_FILE (*crtend*.o $OTHER_EXCLUDE_FILES) .ctors))
+ KEEP (*(EXCLUDE_FILE (*crtend.o *crtend?.o $OTHER_EXCLUDE_FILES) .ctors))
KEEP (*(SORT(.ctors.*)))
KEEP (*(.ctors))
${CONSTRUCTING+${CTOR_END}}
@@ -92,8 +93,9 @@ CTOR=".ctors ${CONSTRUCTING-0} :
DTOR=".dtors ${CONSTRUCTING-0} :
{
${CONSTRUCTING+${DTOR_START}}
- KEEP (*crtbegin*.o(.dtors))
- KEEP (*(EXCLUDE_FILE (*crtend*.o $OTHER_EXCLUDE_FILES) .dtors))
+ KEEP (*crtbegin.o(.dtors))
+ KEEP (*crtbegin?.o(.dtors))
+ KEEP (*(EXCLUDE_FILE (*crtend.o *crtend?.o $OTHER_EXCLUDE_FILES) .dtors))
KEEP (*(SORT(.dtors.*)))
KEEP (*(.dtors))
${CONSTRUCTING+${DTOR_END}}
diff --git a/ld/scripttempl/avr.sc b/ld/scripttempl/avr.sc
index d297b4a70298..7368caf3d012 100644
--- a/ld/scripttempl/avr.sc
+++ b/ld/scripttempl/avr.sc
@@ -71,12 +71,32 @@ SECTIONS
.rel.plt ${RELOCATING-0} : { *(.rel.plt) }
.rela.plt ${RELOCATING-0} : { *(.rela.plt) }
- /* Internal text space or external memory */
+ /* Internal text space or external memory. */
.text :
{
*(.vectors)
KEEP(*(.vectors))
+ /* For data that needs to reside in the lower 64k of progmem. */
+ *(.progmem.gcc*)
+ *(.progmem*)
+ ${RELOCATING+. = ALIGN(2);}
+
+ ${CONSTRUCTING+ __trampolines_start = . ; }
+ /* The jump trampolines for the 16-bit limited relocs will reside here. */
+ *(.trampolines)
+ *(.trampolines*)
+ ${CONSTRUCTING+ __trampolines_end = . ; }
+
+ /* For future tablejump instruction arrays for 3 byte pc devices.
+ We don't relax jump/call instructions within these sections. */
+ *(.jumptables)
+ *(.jumptables*)
+
+ /* For code that needs to reside in the lower 128k progmem. */
+ *(.lowtext)
+ *(.lowtext*)
+
${CONSTRUCTING+ __ctors_start = . ; }
${CONSTRUCTING+ *(.ctors) }
${CONSTRUCTING+ __ctors_end = . ; }
@@ -86,18 +106,8 @@ SECTIONS
KEEP(SORT(*)(.ctors))
KEEP(SORT(*)(.dtors))
- /* For data that needs to reside in the lower 64k of progmem */
- *(.progmem.gcc*)
- *(.progmem*)
- ${RELOCATING+. = ALIGN(2);}
-
- /* for future tablejump instruction arrays for 3 byte pc devices */
- *(.jumptables)
- *(.jumptables*)
- /* for code that needs to reside in the lower 128k progmem */
- *(.lowtext)
- *(.lowtext*)
-
+ /* From this point on, we don't bother about wether the insns are
+ below or above the 16 bits boundary. */
*(.init0) /* Start here after reset. */
KEEP (*(.init0))
*(.init1)
diff --git a/ld/scripttempl/crisaout.sc b/ld/scripttempl/crisaout.sc
index acdca7a91229..186fac765da8 100644
--- a/ld/scripttempl/crisaout.sc
+++ b/ld/scripttempl/crisaout.sc
@@ -48,15 +48,17 @@ SECTIONS
/* Cater to linking from ELF. */
${CONSTRUCTING+ PROVIDE(___ctors = .);}
${CONSTRUCTING+ ___elf_ctors_dtors_begin = .;}
- ${CONSTRUCTING+ KEEP (*crtbegin*.o(.ctors))}
- ${CONSTRUCTING+ KEEP (*(EXCLUDE_FILE (*crtend*.o) .ctors))}
+ ${CONSTRUCTING+ KEEP (*crtbegin.o(.ctors))}
+ ${CONSTRUCTING+ KEEP (*crtbegin?.o(.ctors))}
+ ${CONSTRUCTING+ KEEP (*(EXCLUDE_FILE (*crtend.o *crtend?.o) .ctors))}
${CONSTRUCTING+ KEEP (*(SORT(.ctors.*)))}
${CONSTRUCTING+ KEEP (*(.ctors))}
${CONSTRUCTING+ PROVIDE(___ctors_end = .);}
${CONSTRUCTING+ PROVIDE(___dtors = .);}
- ${CONSTRUCTING+ KEEP (*crtbegin*.o(.dtors))}
- ${CONSTRUCTING+ KEEP (*(EXCLUDE_FILE (*crtend*.o) .dtors))}
+ ${CONSTRUCTING+ KEEP (*crtbegin.o(.dtors))}
+ ${CONSTRUCTING+ KEEP (*crtbegin?.o(.dtors))}
+ ${CONSTRUCTING+ KEEP (*(EXCLUDE_FILE (*crtend.o *crtend?.o) .dtors))}
${CONSTRUCTING+ KEEP (*(SORT(.dtors.*)))}
${CONSTRUCTING+ KEEP (*(.dtors))}
${CONSTRUCTING+ PROVIDE(___dtors_end = .);}
diff --git a/ld/scripttempl/elf.sc b/ld/scripttempl/elf.sc
index ac0c7256e2ea..205d1624abc0 100644
--- a/ld/scripttempl/elf.sc
+++ b/ld/scripttempl/elf.sc
@@ -14,6 +14,8 @@
# (e.g., .PARISC.global)
# OTHER_RELRO_SECTIONS - other than .data.rel.ro ...
# (e.g. PPC32 .fixup, .got[12])
+# OTHER_BSS_SECTIONS - other than .bss .sbss ...
+# ATTRS_SECTIONS - at the end
# OTHER_SECTIONS - at the end
# EXECUTABLE_SYMBOLS - symbols that must be defined for an
# executable (e.g., _DYNAMIC_LINK)
@@ -52,6 +54,7 @@
# so that .got can be in the RELRO area. It should be set to
# the number of bytes in the beginning of .got.plt which can be
# in the RELRO area as well.
+# USER_LABEL_PREFIX - prefix to add to user-visible symbols.
#
# When adding sections, do note that the names of some sections are used
# when specifying the start address of the next.
@@ -94,6 +97,7 @@ test -z "${ETEXT_NAME}" && ETEXT_NAME=etext
test -n "$CREATE_SHLIB$CREATE_PIE" && test -n "$SHLIB_DATA_ADDR" && COMMONPAGESIZE=""
test -z "$CREATE_SHLIB$CREATE_PIE" && test -n "$DATA_ADDR" && COMMONPAGESIZE=""
test -n "$RELRO_NOW" && unset SEPARATE_GOTPLT
+test -z "$ATTRS_SECTIONS" && ATTRS_SECTIONS=".gnu.attributes 0 : { KEEP (*(.gnu.attributes)) }"
DATA_SEGMENT_ALIGN="ALIGN(${SEGMENT_SIZE}) + (. & (${MAXPAGESIZE} - 1))"
DATA_SEGMENT_RELRO_END=""
DATA_SEGMENT_END=""
@@ -102,7 +106,9 @@ if test -n "${COMMONPAGESIZE}"; then
DATA_SEGMENT_END=". = DATA_SEGMENT_END (.);"
DATA_SEGMENT_RELRO_END=". = DATA_SEGMENT_RELRO_END (${SEPARATE_GOTPLT-0}, .);"
fi
-INTERP=".interp ${RELOCATING-0} : { *(.interp) }"
+if test -z "${INITIAL_READONLY_SECTIONS}${CREATE_SHLIB}"; then
+ INITIAL_READONLY_SECTIONS=".interp ${RELOCATING-0} : { *(.interp) }"
+fi
if test -z "$PLT"; then
PLT=".plt ${RELOCATING-0} : { *(.plt) }"
fi
@@ -173,13 +179,15 @@ test "${LARGE_SECTIONS}" = "yes" && REL_LARGE="
.rela.lbss ${RELOCATING-0} : { *(.rela.lbss${RELOCATING+ .rela.lbss.* .rela.gnu.linkonce.lb.*}) }
.rel.lrodata ${RELOCATING-0} : { *(.rel.lrodata${RELOCATING+ .rel.lrodata.* .rel.gnu.linkonce.lr.*}) }
.rela.lrodata ${RELOCATING-0} : { *(.rela.lrodata${RELOCATING+ .rela.lrodata.* .rela.gnu.linkonce.lr.*}) }"
-test "${LARGE_SECTIONS}" = "yes" && LARGE_SECTIONS="
+test "${LARGE_SECTIONS}" = "yes" && OTHER_BSS_SECTIONS="
+ ${OTHER_BSS_SECTIONS}
.lbss ${RELOCATING-0} :
{
*(.dynlbss)
*(.lbss${RELOCATING+ .lbss.* .gnu.linkonce.lb.*})
*(LARGE_COMMON)
- }
+ }"
+test "${LARGE_SECTIONS}" = "yes" && LARGE_SECTIONS="
.lrodata ${RELOCATING-0} ${RELOCATING+ALIGN(${MAXPAGESIZE}) + (. & (${MAXPAGESIZE} - 1))} :
{
*(.lrodata${RELOCATING+ .lrodata.* .gnu.linkonce.lr.*})
@@ -202,14 +210,15 @@ CTOR=".ctors ${CONSTRUCTING-0} :
doesn't matter which directory crtbegin.o
is in. */
- KEEP (*crtbegin*.o(.ctors))
+ KEEP (*crtbegin.o(.ctors))
+ KEEP (*crtbegin?.o(.ctors))
/* We don't want to include the .ctor section from
the crtend.o file until after the sorted ctors.
The .ctor section from the crtend file contains the
end of ctors marker and it must be last */
- KEEP (*(EXCLUDE_FILE (*crtend*.o $OTHER_EXCLUDE_FILES) .ctors))
+ KEEP (*(EXCLUDE_FILE (*crtend.o *crtend?.o $OTHER_EXCLUDE_FILES) .ctors))
KEEP (*(SORT(.ctors.*)))
KEEP (*(.ctors))
${CONSTRUCTING+${CTOR_END}}
@@ -217,8 +226,9 @@ CTOR=".ctors ${CONSTRUCTING-0} :
DTOR=".dtors ${CONSTRUCTING-0} :
{
${CONSTRUCTING+${DTOR_START}}
- KEEP (*crtbegin*.o(.dtors))
- KEEP (*(EXCLUDE_FILE (*crtend*.o $OTHER_EXCLUDE_FILES) .dtors))
+ KEEP (*crtbegin.o(.dtors))
+ KEEP (*crtbegin?.o(.dtors))
+ KEEP (*(EXCLUDE_FILE (*crtend.o *crtend?.o $OTHER_EXCLUDE_FILES) .dtors))
KEEP (*(SORT(.dtors.*)))
KEEP (*(.dtors))
${CONSTRUCTING+${DTOR_END}}
@@ -256,10 +266,10 @@ SECTIONS
${CREATE_SHLIB-${CREATE_PIE-${RELOCATING+PROVIDE (__executable_start = ${TEXT_START_ADDR}); . = ${TEXT_BASE_ADDRESS};}}}
${CREATE_SHLIB+${RELOCATING+. = ${SHLIB_TEXT_START_ADDR:-0} + SIZEOF_HEADERS;}}
${CREATE_PIE+${RELOCATING+. = ${SHLIB_TEXT_START_ADDR:-0} + SIZEOF_HEADERS;}}
- ${CREATE_SHLIB-${INTERP}}
${INITIAL_READONLY_SECTIONS}
${TEXT_DYNAMIC+${DYNAMIC}}
.hash ${RELOCATING-0} : { *(.hash) }
+ .gnu.hash ${RELOCATING-0} : { *(.gnu.hash) }
.dynsym ${RELOCATING-0} : { *(.dynsym) }
.dynstr ${RELOCATING-0} : { *(.dynstr) }
.gnu.version ${RELOCATING-0} : { *(.gnu.version) }
@@ -378,23 +388,23 @@ cat <<EOF
.preinit_array ${RELOCATING-0} :
{
- ${RELOCATING+${CREATE_SHLIB-PROVIDE_HIDDEN (__preinit_array_start = .);}}
+ ${RELOCATING+${CREATE_SHLIB-PROVIDE_HIDDEN (${USER_LABEL_PREFIX}__preinit_array_start = .);}}
KEEP (*(.preinit_array))
- ${RELOCATING+${CREATE_SHLIB-PROVIDE_HIDDEN (__preinit_array_end = .);}}
+ ${RELOCATING+${CREATE_SHLIB-PROVIDE_HIDDEN (${USER_LABEL_PREFIX}__preinit_array_end = .);}}
}
.init_array ${RELOCATING-0} :
{
- ${RELOCATING+${CREATE_SHLIB-PROVIDE_HIDDEN (__init_array_start = .);}}
+ ${RELOCATING+${CREATE_SHLIB-PROVIDE_HIDDEN (${USER_LABEL_PREFIX}__init_array_start = .);}}
KEEP (*(SORT(.init_array.*)))
KEEP (*(.init_array))
- ${RELOCATING+${CREATE_SHLIB-PROVIDE_HIDDEN (__init_array_end = .);}}
+ ${RELOCATING+${CREATE_SHLIB-PROVIDE_HIDDEN (${USER_LABEL_PREFIX}__init_array_end = .);}}
}
.fini_array ${RELOCATING-0} :
{
- ${RELOCATING+${CREATE_SHLIB-PROVIDE_HIDDEN (__fini_array_start = .);}}
+ ${RELOCATING+${CREATE_SHLIB-PROVIDE_HIDDEN (${USER_LABEL_PREFIX}__fini_array_start = .);}}
KEEP (*(.fini_array))
KEEP (*(SORT(.fini_array.*)))
- ${RELOCATING+${CREATE_SHLIB-PROVIDE_HIDDEN (__fini_array_end = .);}}
+ ${RELOCATING+${CREATE_SHLIB-PROVIDE_HIDDEN (${USER_LABEL_PREFIX}__fini_array_end = .);}}
}
${SMALL_DATA_CTOR-${RELOCATING+${CTOR}}}
${SMALL_DATA_DTOR-${RELOCATING+${DTOR}}}
@@ -416,7 +426,7 @@ cat <<EOF
{
${RELOCATING+${DATA_START_SYMBOLS}}
*(.data${RELOCATING+ .data.* .gnu.linkonce.d.*})
- KEEP (*(.gnu.linkonce.d.*personality*))
+ ${RELOCATING+KEEP (*(.gnu.linkonce.d.*personality*))}
${CONSTRUCTING+SORT(CONSTRUCTORS)}
}
.data1 ${RELOCATING-0} : { *(.data1) }
@@ -430,7 +440,7 @@ cat <<EOF
${SDATA_GOT+${OTHER_GOT_SECTIONS}}
${SDATA}
${OTHER_SDATA_SECTIONS}
- ${RELOCATING+${DATA_END_SYMBOLS-_edata = .; PROVIDE (edata = .);}}
+ ${RELOCATING+${DATA_END_SYMBOLS-${USER_LABEL_PREFIX}_edata = .; PROVIDE (${USER_LABEL_PREFIX}edata = .);}}
${RELOCATING+__bss_start = .;}
${RELOCATING+${OTHER_BSS_SYMBOLS}}
${SBSS}
@@ -447,12 +457,13 @@ cat <<EOF
pad the .data section. */
${RELOCATING+. = ALIGN(. != 0 ? ${ALIGNMENT} : 1);}
}
+ ${OTHER_BSS_SECTIONS}
${RELOCATING+${OTHER_BSS_END_SYMBOLS}}
${RELOCATING+. = ALIGN(${ALIGNMENT});}
${LARGE_SECTIONS}
${RELOCATING+. = ALIGN(${ALIGNMENT});}
${RELOCATING+${OTHER_END_SYMBOLS}}
- ${RELOCATING+${END_SYMBOLS-_end = .; PROVIDE (end = .);}}
+ ${RELOCATING+${END_SYMBOLS-${USER_LABEL_PREFIX}_end = .; PROVIDE (${USER_LABEL_PREFIX}end = .);}}
${RELOCATING+${DATA_SEGMENT_END}}
/* Stabs debugging sections. */
@@ -482,7 +493,7 @@ cat <<EOF
.debug_pubnames 0 : { *(.debug_pubnames) }
/* DWARF 2 */
- .debug_info 0 : { *(.debug_info .gnu.linkonce.wi.*) }
+ .debug_info 0 : { *(.debug_info${RELOCATING+ .gnu.linkonce.wi.*}) }
.debug_abbrev 0 : { *(.debug_abbrev) }
.debug_line 0 : { *(.debug_line) }
.debug_frame 0 : { *(.debug_frame) }
@@ -496,10 +507,15 @@ cat <<EOF
.debug_typenames 0 : { *(.debug_typenames) }
.debug_varnames 0 : { *(.debug_varnames) }
+ /* DWARF 3 */
+ .debug_pubtypes 0 : { *(.debug_pubtypes) }
+ .debug_ranges 0 : { *(.debug_ranges) }
+
${TINY_DATA_SECTION}
${TINY_BSS_SECTION}
${STACK_ADDR+${STACK}}
+ ${ATTRS_SECTIONS}
${OTHER_SECTIONS}
${RELOCATING+${OTHER_SYMBOLS}}
${RELOCATING+${STACKNOTE}}
diff --git a/ld/scripttempl/elf32cr16.sc b/ld/scripttempl/elf32cr16.sc
new file mode 100644
index 000000000000..2e62fa2f5c76
--- /dev/null
+++ b/ld/scripttempl/elf32cr16.sc
@@ -0,0 +1,175 @@
+# Linker Script for National Semiconductor's CR16-ELF32.
+
+# The next line should be uncommented if it is desired to link
+# without libstart.o and directly enter main.
+
+# ENTRY=_main
+
+test -z "$ENTRY" && ENTRY=_start
+cat <<EOF
+
+/* Example Linker Script for linking NS CR16 elf32 files. */
+
+/* The next line forces the entry point (${ENTRY} in this script)
+ to be entered in the output file as an undefined symbol.
+ It is needed in case the entry point is not called explicitly
+ (which is the usual case) AND is in an archive. */
+
+OUTPUT_FORMAT("${OUTPUT_FORMAT}")
+OUTPUT_ARCH(${ARCH})
+EXTERN(${ENTRY})
+ENTRY(${ENTRY})
+
+/* Define memory regions. */
+MEMORY
+{
+ rom : ORIGIN = 0x2, LENGTH = 3M
+ ram : ORIGIN = 4M, LENGTH = 10M
+}
+
+/* Many sections come in three flavours. There is the 'real' section,
+ like ".data". Then there are the per-procedure or per-variable
+ sections, generated by -ffunction-sections and -fdata-sections in GCC,
+ and useful for --gc-sections, which for a variable "foo" might be
+ ".data.foo". Then there are the linkonce sections, for which the linker
+ eliminates duplicates, which are named like ".gnu.linkonce.d.foo".
+ The exact correspondences are:
+
+ Section Linkonce section
+ .text .gnu.linkonce.t.foo
+ .rdata .gnu.linkonce.r.foo
+ .data .gnu.linkonce.d.foo
+ .bss .gnu.linkonce.b.foo
+ .debug_info .gnu.linkonce.wi.foo */
+
+SECTIONS
+{
+ .init :
+ {
+ __INIT_START = .;
+ KEEP (*(.init))
+ __INIT_END = .;
+ } > rom
+
+ .fini :
+ {
+ __FINI_START = .;
+ KEEP (*(.fini))
+ __FINI_END = .;
+ } > rom
+
+ .jcr :
+ {
+ KEEP (*(.jcr))
+ } > rom
+
+ .text :
+ {
+ __TEXT_START = .;
+ *(.text) *(.text.*) *(.gnu.linkonce.t.*)
+ __TEXT_END = .;
+ } > rom
+
+ .rdata :
+ {
+ __RDATA_START = .;
+ *(.rdata_4) *(.rdata_2) *(.rdata_1) *(.rdata.*) *(.gnu.linkonce.r.*) *(.rodata*)
+ __RDATA_END = .;
+ } > rom
+
+ .ctor ALIGN(4) :
+ {
+ __CTOR_START = .;
+ /* The compiler uses crtbegin.o to find the start
+ of the constructors, so we make sure it is
+ first. Because this is a wildcard, it
+ doesn't matter if the user does not
+ actually link against crtbegin.o; the
+ linker won't look for a file to match a
+ wildcard. The wildcard also means that it
+ doesn't matter which directory crtbegin.o
+ is in. */
+
+ KEEP (*crtbegin*.o(.ctors))
+
+ /* We don't want to include the .ctor section from
+ the crtend.o file until after the sorted ctors.
+ The .ctor section from the crtend file contains the
+ end of ctors marker and it must be last */
+
+ KEEP (*(EXCLUDE_FILE (*crtend*.o) .ctors))
+ KEEP (*(SORT(.ctors.*)))
+ KEEP (*(.ctors))
+ __CTOR_END = .;
+ } > rom
+
+ .dtor ALIGN(4) :
+ {
+ __DTOR_START = .;
+ KEEP (*crtbegin*.o(.dtors))
+ KEEP (*(EXCLUDE_FILE (*crtend*.o) .dtors))
+ KEEP (*(SORT(.dtors.*)))
+ KEEP (*(.dtors))
+ __DTOR_END = .;
+ } > rom
+
+ .data :
+ {
+ __DATA_START = .;
+ *(.data_4) *(.data_2) *(.data_1) *(.data) *(.data.*) *(.gnu.linkonce.d.*)
+ __DATA_END = .;
+ } > ram AT > rom
+
+ .bss (NOLOAD) :
+ {
+ __BSS_START = .;
+ *(.bss_4) *(.bss_2) *(.bss_1) *(.bss) *(COMMON) *(.bss.*) *(.gnu.linkonce.b.*)
+ __BSS_END = .;
+ } > ram
+
+/* You may change the sizes of the following sections to fit the actual
+ size your program requires.
+
+ The heap and stack are aligned to the bus width, as a speed optimization
+ for accessing data located there. */
+
+ .heap :
+ {
+ . = ALIGN(4);
+ __HEAP_START = .;
+ . += 0x2000; __HEAP_MAX = .;
+ } > ram
+
+ .stack :
+ {
+ . = ALIGN(4);
+ . += 0x6000;
+ __STACK_START = .;
+ } > ram
+
+ .istack :
+ {
+ . = ALIGN(4);
+ . += 0x100;
+ __ISTACK_START = .;
+ } > ram
+
+ .comment 0 : { *(.comment) }
+
+ /* DWARF debug sections.
+ Symbols in the DWARF debugging sections are relative to the beginning
+ of the section so we begin them at 0. */
+
+ .debug_aranges 0 : { *(.debug_aranges) }
+ .debug_pubnames 0 : { *(.debug_pubnames) }
+ .debug_info 0 : { *(.debug_info .gnu.linkonce.wi.*) }
+ .debug_abbrev 0 : { *(.debug_abbrev) }
+ .debug_line 0 : { *(.debug_line) }
+ .debug_frame 0 : { *(.debug_frame) }
+ .debug_str 0 : { *(.debug_str) }
+ .debug_loc 0 : { *(.debug_loc) }
+ .debug_macinfo 0 : { *(.debug_macinfo) }
+}
+
+__DATA_IMAGE_START = LOADADDR(.data);
+EOF
diff --git a/ld/scripttempl/elf32crx.sc b/ld/scripttempl/elf32crx.sc
index 63401fe7e2c1..430418744f91 100644
--- a/ld/scripttempl/elf32crx.sc
+++ b/ld/scripttempl/elf32crx.sc
@@ -90,14 +90,15 @@ SECTIONS
doesn't matter which directory crtbegin.o
is in. */
- KEEP (*crtbegin*.o(.ctors))
-
+ KEEP (*crtbegin.o(.ctors))
+ KEEP (*crtbegin?.o(.ctors))
+
/* We don't want to include the .ctor section from
the crtend.o file until after the sorted ctors.
The .ctor section from the crtend file contains the
end of ctors marker and it must be last */
- KEEP (*(EXCLUDE_FILE (*crtend*.o) .ctors))
+ KEEP (*(EXCLUDE_FILE (*crtend.o *crtend?.o) .ctors))
KEEP (*(SORT(.ctors.*)))
KEEP (*(.ctors))
__CTOR_END = .;
@@ -106,8 +107,9 @@ SECTIONS
.dtor ALIGN(4) :
{
__DTOR_START = .;
- KEEP (*crtbegin*.o(.dtors))
- KEEP (*(EXCLUDE_FILE (*crtend*.o) .dtors))
+ KEEP (*crtbegin.o(.dtors))
+ KEEP (*crtbegin?.o(.dtors))
+ KEEP (*(EXCLUDE_FILE (*crtend.o *crtend?.o) .dtors))
KEEP (*(SORT(.dtors.*)))
KEEP (*(.dtors))
__DTOR_END = .;
diff --git a/ld/scripttempl/elf32sh-symbian.sc b/ld/scripttempl/elf32sh-symbian.sc
index 1bcac18106a8..aab35d5232f5 100644
--- a/ld/scripttempl/elf32sh-symbian.sc
+++ b/ld/scripttempl/elf32sh-symbian.sc
@@ -8,6 +8,7 @@
# OTHER_TEXT_SECTIONS - these get put in .text when relocating
# OTHER_READWRITE_SECTIONS - other than .data .bss .ctors .sdata ...
# (e.g., .PARISC.global)
+# ATTRS_SECTIONS - at the end
# OTHER_SECTIONS - at the end
# EXECUTABLE_SYMBOLS - symbols that must be defined for an
# executable (e.g., _DYNAMIC_LINK)
@@ -71,6 +72,7 @@ test -z "${ALIGNMENT}" && ALIGNMENT="${ELFSIZE} / 8"
test "$LD_FLAG" = "N" && DATA_ADDR=.
test -n "$CREATE_SHLIB$CREATE_PIE" && test -n "$SHLIB_DATA_ADDR" && COMMONPAGESIZE=""
test -z "$CREATE_SHLIB$CREATE_PIE" && test -n "$DATA_ADDR" && COMMONPAGESIZE=""
+test -z "$ATTRS_SECTIONS" && ATTRS_SECTIONS=".gnu.attributes 0 : { KEEP (*(.gnu.attributes)) }"
DATA_SEGMENT_ALIGN="ALIGN(${SEGMENT_SIZE}) + (. & (${MAXPAGESIZE} - 1))"
DATA_SEGMENT_END=""
if test -n "${COMMONPAGESIZE}"; then
@@ -96,14 +98,15 @@ CTOR=".ctors ALIGN(4) :
doesn't matter which directory crtbegin.o
is in. */
- KEEP (*crtbegin*.o(.ctors))
+ KEEP (*crtbegin.o(.ctors))
+ KEEP (*crtbegin?.o(.ctors))
/* We don't want to include the .ctor section from
the crtend.o file until after the sorted ctors.
The .ctor section from the crtend file contains the
end of ctors marker and it must be last */
- KEEP (*(EXCLUDE_FILE (*crtend*.o $OTHER_EXCLUDE_FILES) .ctors))
+ KEEP (*(EXCLUDE_FILE (*crtend.o *crtend?.o $OTHER_EXCLUDE_FILES) .ctors))
KEEP (*(SORT(.ctors.*)))
KEEP (*(.ctors))
${CONSTRUCTING+${CTOR_END}}
@@ -111,8 +114,9 @@ CTOR=".ctors ALIGN(4) :
DTOR=".dtors ALIGN(4) :
{
${CONSTRUCTING+${DTOR_START}}
- KEEP (*crtbegin*.o(.dtors))
- KEEP (*(EXCLUDE_FILE (*crtend*.o $OTHER_EXCLUDE_FILES) .dtors))
+ KEEP (*crtbegin.o(.dtors))
+ KEEP (*crtbegin?.o(.dtors))
+ KEEP (*(EXCLUDE_FILE (*crtend.o *crtend?.o $OTHER_EXCLUDE_FILES) .dtors))
KEEP (*(SORT(.dtors.*)))
KEEP (*(.dtors))
${CONSTRUCTING+${DTOR_END}}
@@ -373,6 +377,7 @@ cat <<EOF
.debug_varnames 0 : { *(.debug_varnames) }
${STACK_ADDR+${STACK}}
+ ${ATTRS_SECTIONS}
${OTHER_SECTIONS}
${RELOCATING+${OTHER_SYMBOLS}}
${RELOCATING+${STACKNOTE}}
diff --git a/ld/scripttempl/elf_chaos.sc b/ld/scripttempl/elf_chaos.sc
index 167b7124ef67..2725cf5081a1 100644
--- a/ld/scripttempl/elf_chaos.sc
+++ b/ld/scripttempl/elf_chaos.sc
@@ -10,6 +10,7 @@
# OTHER_TEXT_SECTIONS - these get put in .text when relocating
# OTHER_READWRITE_SECTIONS - other than .data .bss .ctors .sdata ...
# (e.g., .PARISC.global)
+# ATTRS_SECTIONS - at the end
# OTHER_SECTIONS - at the end
# EXECUTABLE_SYMBOLS - symbols that must be defined for an
# executable (e.g., _DYNAMIC_LINK)
@@ -68,6 +69,7 @@ test -z "${LITTLE_OUTPUT_FORMAT}" && LITTLE_OUTPUT_FORMAT=${OUTPUT_FORMAT}
if [ -z "$MACHINE" ]; then OUTPUT_ARCH=${ARCH}; else OUTPUT_ARCH=${ARCH}:${MACHINE}; fi
test -z "${ELFSIZE}" && ELFSIZE=32
test -z "${ALIGNMENT}" && ALIGNMENT="${ELFSIZE} / 8"
+test -z "$ATTRS_SECTIONS" && ATTRS_SECTIONS=".gnu.attributes 0 : { KEEP (*(.gnu.attributes)) }"
test "$LD_FLAG" = "N" && DATA_ADDR=.
INTERP=".interp ${RELOCATING-0} : { *(.interp) }"
PLT=".plt ${RELOCATING-0} : { *(.plt) }"
@@ -115,22 +117,24 @@ CTOR="
doesn't matter which directory crtbegin.o
is in. */
- KEEP (*crtbegin*.o(.ctors))
+ KEEP (*crtbegin.o(.ctors))
+ KEEP (*crtbegin?.o(.ctors))
/* We don't want to include the .ctor section from
the crtend.o file until after the sorted ctors.
The .ctor section from the crtend file contains the
end of ctors marker and it must be last */
- KEEP (*(EXCLUDE_FILE (*crtend*.o $OTHER_EXCLUDE_FILES) .ctors))
+ KEEP (*(EXCLUDE_FILE (*crtend.o *crtend?.o $OTHER_EXCLUDE_FILES) .ctors))
KEEP (*(SORT(.ctors.*)))
KEEP (*(.ctors))
${CONSTRUCTING+${CTOR_END}}
"
DTOR="
${CONSTRUCTING+${DTOR_START}}
- KEEP (*crtbegin*.o(.dtors))
- KEEP (*(EXCLUDE_FILE (*crtend*.o $OTHER_EXCLUDE_FILES) .dtors))
+ KEEP (*crtbegin.o(.dtors))
+ KEEP (*crtbegin?.o(.dtors))
+ KEEP (*(EXCLUDE_FILE (*crtend.o *crtend?.o $OTHER_EXCLUDE_FILES) .dtors))
KEEP (*(SORT(.dtors.*)))
KEEP (*(.dtors))
${CONSTRUCTING+${DTOR_END}}
@@ -347,6 +351,7 @@ cat <<EOF
.debug_varnames 0 : { *(.debug_varnames) }
${STACK_ADDR+${STACK}}
+ ${ATTRS_SECTIONS}
${OTHER_SECTIONS}
${RELOCATING+${OTHER_SYMBOLS}}
}
diff --git a/ld/scripttempl/elfd10v.sc b/ld/scripttempl/elfd10v.sc
index 6145fda45501..a4c907b44a8f 100644
--- a/ld/scripttempl/elfd10v.sc
+++ b/ld/scripttempl/elfd10v.sc
@@ -20,14 +20,15 @@ CTOR=".ctors ${CONSTRUCTING-0} :
doesn't matter which directory crtbegin.o
is in. */
- KEEP (*crtbegin*.o(.ctors))
+ KEEP (*crtbegin.o(.ctors))
+ KEEP (*crtbegin?.o(.ctors))
/* We don't want to include the .ctor section from
the crtend.o file until after the sorted ctors.
The .ctor section from the crtend file contains the
end of ctors marker and it must be last */
- KEEP (*(EXCLUDE_FILE (*crtend*.o) .ctors))
+ KEEP (*(EXCLUDE_FILE (*crtend.o *crtend?.o) .ctors))
KEEP (*(SORT(.ctors.*)))
KEEP (*(.ctors))
${CONSTRUCTING+${CTOR_END}}
@@ -36,8 +37,9 @@ CTOR=".ctors ${CONSTRUCTING-0} :
DTOR=" .dtors ${CONSTRUCTING-0} :
{
${CONSTRUCTING+${DTOR_START}}
- KEEP (*crtbegin*.o(.dtors))
- KEEP (*(EXCLUDE_FILE (*crtend*.o) .dtors))
+ KEEP (*crtbegin.o(.dtors))
+ KEEP (*crtbegin?.o(.dtors))
+ KEEP (*(EXCLUDE_FILE (*crtend.o *crtend?.o) .dtors))
KEEP (*(SORT(.dtors.*)))
KEEP (*(.dtors))
${CONSTRUCTING+${DTOR_END}}
diff --git a/ld/scripttempl/elfd30v.sc b/ld/scripttempl/elfd30v.sc
index 924414d509de..b5db0e6ca911 100644
--- a/ld/scripttempl/elfd30v.sc
+++ b/ld/scripttempl/elfd30v.sc
@@ -12,14 +12,15 @@ CTOR=".ctors ${CONSTRUCTING-0} :
doesn't matter which directory crtbegin.o
is in. */
- KEEP (*crtbegin*.o(.ctors))
+ KEEP (*crtbegin.o(.ctors))
+ KEEP (*crtbegin?.o(.ctors))
/* We don't want to include the .ctor section from
the crtend.o file until after the sorted ctors.
The .ctor section from the crtend file contains the
end of ctors marker and it must be last */
- KEEP (*(EXCLUDE_FILE (*crtend*.o) .ctors))
+ KEEP (*(EXCLUDE_FILE (*crtend.o *crtend?.o) .ctors))
KEEP (*(SORT(.ctors.*)))
KEEP (*(.ctors))
${CONSTRUCTING+ __CTOR_END__ = .; }
@@ -28,8 +29,9 @@ CTOR=".ctors ${CONSTRUCTING-0} :
DTOR=" .dtors ${CONSTRUCTING-0} :
{
${CONSTRUCTING+ __DTOR_LIST__ = .; }
- KEEP (*crtbegin*.o(.dtors))
- KEEP (*(EXCLUDE_FILE (*crtend*.o) .dtors))
+ KEEP (*crtbegin.o(.dtors))
+ KEEP (*crtbegin?.o(.dtors))
+ KEEP (*(EXCLUDE_FILE (*crtend.o *crtend?.o) .dtors))
KEEP (*(SORT(.dtors.*)))
KEEP (*(.dtors))
${CONSTRUCTING+ __DTOR_END__ = .; }
diff --git a/ld/scripttempl/elfi370.sc b/ld/scripttempl/elfi370.sc
index 6b390fe95cf6..06cb3bacf057 100644
--- a/ld/scripttempl/elfi370.sc
+++ b/ld/scripttempl/elfi370.sc
@@ -8,6 +8,7 @@
# (e.g., .PARISC.milli)
# OTHER_READWRITE_SECTIONS - other than .data .bss .ctors .sdata ...
# (e.g., .PARISC.global)
+# ATTRS_SECTIONS - at the end
# OTHER_SECTIONS - at the end
# EXECUTABLE_SYMBOLS - symbols that must be defined for an
# executable (e.g., _DYNAMIC_LINK)
@@ -24,6 +25,7 @@
test -z "$ENTRY" && ENTRY=_start
test -z "${BIG_OUTPUT_FORMAT}" && BIG_OUTPUT_FORMAT=${OUTPUT_FORMAT}
test -z "${LITTLE_OUTPUT_FORMAT}" && LITTLE_OUTPUT_FORMAT=${OUTPUT_FORMAT}
+test -z "$ATTRS_SECTIONS" && ATTRS_SECTIONS=".gnu.attributes 0 : { KEEP (*(.gnu.attributes)) }"
test "$LD_FLAG" = "N" && DATA_ADDR=.
SBSS2=".sbss2 ${RELOCATING-0} : { *(.sbss2) }"
SDATA2=".sdata2 ${RELOCATING-0} : { *(.sdata2) }"
@@ -212,6 +214,7 @@ SECTIONS
.debug_typenames 0 : { *(.debug_typenames) }
.debug_varnames 0 : { *(.debug_varnames) }
+ ${ATTRS_SECTIONS}
${OTHER_SECTIONS}
}
EOF
diff --git a/ld/scripttempl/elfxtensa.sc b/ld/scripttempl/elfxtensa.sc
index 9c3aa1fe5e70..29282aa04c09 100644
--- a/ld/scripttempl/elfxtensa.sc
+++ b/ld/scripttempl/elfxtensa.sc
@@ -14,6 +14,8 @@
# (e.g., .PARISC.global)
# OTHER_RELRO_SECTIONS - other than .data.rel.ro ...
# (e.g. PPC32 .fixup, .got[12])
+# OTHER_BSS_SECTIONS - other than .bss .sbss ...
+# ATTRS_SECTIONS - at the end
# OTHER_SECTIONS - at the end
# EXECUTABLE_SYMBOLS - symbols that must be defined for an
# executable (e.g., _DYNAMIC_LINK)
@@ -52,6 +54,7 @@
# so that .got can be in the RELRO area. It should be set to
# the number of bytes in the beginning of .got.plt which can be
# in the RELRO area as well.
+# USER_LABEL_PREFIX - prefix to add to user-visible symbols.
#
# When adding sections, do note that the names of some sections are used
# when specifying the start address of the next.
@@ -77,6 +80,22 @@
# .debug_info .gnu.linkonce.wi.foo
# .tdata .gnu.linkonce.td.foo
# .tbss .gnu.linkonce.tb.foo
+# .lrodata .gnu.linkonce.lr.foo
+# .ldata .gnu.linkonce.l.foo
+# .lbss .gnu.linkonce.lb.foo
+#
+# plus exception-handling information for Tensilica's XCC compiler:
+# .xt_except_table .gnu.linkonce.e.foo
+# .xt_except_desc .gnu.linkonce.h.foo
+#
+# plus Xtensa-specific literal sections:
+# .literal .gnu.linkonce.literal.foo
+# .lit4 .gnu.linkonce.lit4.foo
+#
+# plus Xtensa-specific "property table" sections:
+# .xt.lit .gnu.linkonce.p.foo
+# .xt.insn .gnu.linkonce.x.foo (obsolete)
+# .xt.prop .gnu.linkonce.prop.foo
#
# Each of these can also have corresponding .rel.* and .rela.* sections.
@@ -91,6 +110,7 @@ test -z "${ETEXT_NAME}" && ETEXT_NAME=etext
test -n "$CREATE_SHLIB$CREATE_PIE" && test -n "$SHLIB_DATA_ADDR" && COMMONPAGESIZE=""
test -z "$CREATE_SHLIB$CREATE_PIE" && test -n "$DATA_ADDR" && COMMONPAGESIZE=""
test -n "$RELRO_NOW" && unset SEPARATE_GOTPLT
+test -z "$ATTRS_SECTIONS" && ATTRS_SECTIONS=".gnu.attributes 0 : { KEEP (*(.gnu.attributes)) }"
DATA_SEGMENT_ALIGN="ALIGN(${SEGMENT_SIZE}) + (. & (${MAXPAGESIZE} - 1))"
DATA_SEGMENT_RELRO_END=""
DATA_SEGMENT_END=""
@@ -99,10 +119,13 @@ if test -n "${COMMONPAGESIZE}"; then
DATA_SEGMENT_END=". = DATA_SEGMENT_END (.);"
DATA_SEGMENT_RELRO_END=". = DATA_SEGMENT_RELRO_END (${SEPARATE_GOTPLT-0}, .);"
fi
-INTERP=".interp ${RELOCATING-0} : { *(.interp) }"
+if test -z "${INITIAL_READONLY_SECTIONS}${CREATE_SHLIB}"; then
+ INITIAL_READONLY_SECTIONS=".interp ${RELOCATING-0} : { *(.interp) }"
+fi
if test -z "$PLT"; then
PLT=".plt ${RELOCATING-0} : { *(.plt) }"
fi
+test -n "${DATA_PLT-${BSS_PLT-text}}" && TEXT_PLT=yes
if test -z "$GOT"; then
if test -z "$SEPARATE_GOTPLT"; then
GOT=".got ${RELOCATING-0} : { *(.got.plt) *(.got) }"
@@ -113,7 +136,7 @@ if test -z "$GOT"; then
fi
DYNAMIC=".dynamic ${RELOCATING-0} : { *(.dynamic) }"
RODATA=".rodata ${RELOCATING-0} : { *(.rodata${RELOCATING+ .rodata.* .gnu.linkonce.r.*}) }"
-DATARELRO=".data.rel.ro : { *(.data.rel.ro.local) *(.data.rel.ro*) }"
+DATARELRO=".data.rel.ro : { *(.data.rel.ro.local* .gnu.linkonce.d.rel.ro.local.*) *(.data.rel.ro* .gnu.linkonce.d.rel.ro.*) }"
STACKNOTE="/DISCARD/ : { *(.note.GNU-stack) }"
INIT_LIT=".init.literal 0 : { *(.init.literal) }"
INIT=".init 0 : { *(.init) }"
@@ -122,10 +145,12 @@ FINI=".fini 0 : { *(.fini) }"
if test -z "${NO_SMALL_DATA}"; then
SBSS=".sbss ${RELOCATING-0} :
{
+ ${RELOCATING+${SBSS_START_SYMBOLS}}
${CREATE_SHLIB+*(.sbss2 .sbss2.* .gnu.linkonce.sb2.*)}
*(.dynsbss)
*(.sbss${RELOCATING+ .sbss.* .gnu.linkonce.sb.*})
*(.scommon)
+ ${RELOCATING+${SBSS_END_SYMBOLS}}
}"
SBSS2=".sbss2 ${RELOCATING-0} : { *(.sbss2${RELOCATING+ .sbss2.* .gnu.linkonce.sb2.*}) }"
SDATA="/* We want the small data sections together, so single-instruction offsets
@@ -137,7 +162,11 @@ if test -z "${NO_SMALL_DATA}"; then
${CREATE_SHLIB+*(.sdata2 .sdata2.* .gnu.linkonce.s2.*)}
*(.sdata${RELOCATING+ .sdata.* .gnu.linkonce.s.*})
}"
- SDATA2=".sdata2 ${RELOCATING-0} : { *(.sdata2${RELOCATING+ .sdata2.* .gnu.linkonce.s2.*}) }"
+ SDATA2=".sdata2 ${RELOCATING-0} :
+ {
+ ${RELOCATING+${SDATA2_START_SYMBOLS}}
+ *(.sdata2${RELOCATING+ .sdata2.* .gnu.linkonce.s2.*})
+ }"
REL_SDATA=".rel.sdata ${RELOCATING-0} : { *(.rel.sdata${RELOCATING+ .rel.sdata.* .rel.gnu.linkonce.s.*}) }
.rela.sdata ${RELOCATING-0} : { *(.rela.sdata${RELOCATING+ .rela.sdata.* .rela.gnu.linkonce.s.*}) }"
REL_SBSS=".rel.sbss ${RELOCATING-0} : { *(.rel.sbss${RELOCATING+ .rel.sbss.* .rel.gnu.linkonce.sb.*}) }
@@ -160,6 +189,31 @@ if test -z "${SDATA_GOT}"; then
fi
fi
test -n "$SEPARATE_GOTPLT" && SEPARATE_GOTPLT=" "
+test "${LARGE_SECTIONS}" = "yes" && REL_LARGE="
+ .rel.ldata ${RELOCATING-0} : { *(.rel.ldata${RELOCATING+ .rel.ldata.* .rel.gnu.linkonce.l.*}) }
+ .rela.ldata ${RELOCATING-0} : { *(.rela.ldata${RELOCATING+ .rela.ldata.* .rela.gnu.linkonce.l.*}) }
+ .rel.lbss ${RELOCATING-0} : { *(.rel.lbss${RELOCATING+ .rel.lbss.* .rel.gnu.linkonce.lb.*}) }
+ .rela.lbss ${RELOCATING-0} : { *(.rela.lbss${RELOCATING+ .rela.lbss.* .rela.gnu.linkonce.lb.*}) }
+ .rel.lrodata ${RELOCATING-0} : { *(.rel.lrodata${RELOCATING+ .rel.lrodata.* .rel.gnu.linkonce.lr.*}) }
+ .rela.lrodata ${RELOCATING-0} : { *(.rela.lrodata${RELOCATING+ .rela.lrodata.* .rela.gnu.linkonce.lr.*}) }"
+test "${LARGE_SECTIONS}" = "yes" && OTHER_BSS_SECTIONS="
+ ${OTHER_BSS_SECTIONS}
+ .lbss ${RELOCATING-0} :
+ {
+ *(.dynlbss)
+ *(.lbss${RELOCATING+ .lbss.* .gnu.linkonce.lb.*})
+ *(LARGE_COMMON)
+ }"
+test "${LARGE_SECTIONS}" = "yes" && LARGE_SECTIONS="
+ .lrodata ${RELOCATING-0} ${RELOCATING+ALIGN(${MAXPAGESIZE}) + (. & (${MAXPAGESIZE} - 1))} :
+ {
+ *(.lrodata${RELOCATING+ .lrodata.* .gnu.linkonce.lr.*})
+ }
+ .ldata ${RELOCATING-0} ${RELOCATING+ALIGN(${MAXPAGESIZE}) + (. & (${MAXPAGESIZE} - 1))} :
+ {
+ *(.ldata${RELOCATING+ .ldata.* .gnu.linkonce.l.*})
+ ${RELOCATING+. = ALIGN(. != 0 ? ${ALIGNMENT} : 1);}
+ }"
CTOR=".ctors ${CONSTRUCTING-0} :
{
${CONSTRUCTING+${CTOR_START}}
@@ -173,14 +227,15 @@ CTOR=".ctors ${CONSTRUCTING-0} :
doesn't matter which directory crtbegin.o
is in. */
- KEEP (*crtbegin*.o(.ctors))
+ KEEP (*crtbegin.o(.ctors))
+ KEEP (*crtbegin?.o(.ctors))
/* We don't want to include the .ctor section from
the crtend.o file until after the sorted ctors.
The .ctor section from the crtend file contains the
end of ctors marker and it must be last */
- KEEP (*(EXCLUDE_FILE (*crtend*.o $OTHER_EXCLUDE_FILES) .ctors))
+ KEEP (*(EXCLUDE_FILE (*crtend.o *crtend?.o $OTHER_EXCLUDE_FILES) .ctors))
KEEP (*(SORT(.ctors.*)))
KEEP (*(.ctors))
${CONSTRUCTING+${CTOR_END}}
@@ -188,8 +243,9 @@ CTOR=".ctors ${CONSTRUCTING-0} :
DTOR=".dtors ${CONSTRUCTING-0} :
{
${CONSTRUCTING+${DTOR_START}}
- KEEP (*crtbegin*.o(.dtors))
- KEEP (*(EXCLUDE_FILE (*crtend*.o $OTHER_EXCLUDE_FILES) .dtors))
+ KEEP (*crtbegin.o(.dtors))
+ KEEP (*crtbegin?.o(.dtors))
+ KEEP (*(EXCLUDE_FILE (*crtend.o *crtend?.o $OTHER_EXCLUDE_FILES) .dtors))
KEEP (*(SORT(.dtors.*)))
KEEP (*(.dtors))
${CONSTRUCTING+${DTOR_END}}
@@ -211,8 +267,6 @@ cat <<EOF
ENTRY(${ENTRY})
${RELOCATING+${LIB_SEARCH_DIRS}}
-${RELOCATING+/* Do we need any of these for elf?
- __DYNAMIC = 0; ${STACKZERO+${STACKZERO}} ${SHLIB_PATH+${SHLIB_PATH}} */}
${RELOCATING+${EXECUTABLE_SYMBOLS}}
${RELOCATING+${INPUT_FILES}}
${RELOCATING- /* For some reason, the Solaris linker makes bad executables
@@ -226,10 +280,10 @@ SECTIONS
${CREATE_SHLIB-${CREATE_PIE-${RELOCATING+PROVIDE (__executable_start = ${TEXT_START_ADDR}); . = ${TEXT_BASE_ADDRESS};}}}
${CREATE_SHLIB+${RELOCATING+. = ${SHLIB_TEXT_START_ADDR:-0} + SIZEOF_HEADERS;}}
${CREATE_PIE+${RELOCATING+. = ${SHLIB_TEXT_START_ADDR:-0} + SIZEOF_HEADERS;}}
- ${CREATE_SHLIB-${INTERP}}
${INITIAL_READONLY_SECTIONS}
${TEXT_DYNAMIC+${DYNAMIC}}
.hash ${RELOCATING-0} : { *(.hash) }
+ .gnu.hash ${RELOCATING-0} : { *(.gnu.hash) }
.dynsym ${RELOCATING-0} : { *(.dynsym) }
.dynstr ${RELOCATING-0} : { *(.dynstr) }
.gnu.version ${RELOCATING-0} : { *(.gnu.version) }
@@ -252,8 +306,8 @@ eval $COMBRELOCCAT <<EOF
.rel.rodata ${RELOCATING-0} : { *(.rel.rodata${RELOCATING+ .rel.rodata.* .rel.gnu.linkonce.r.*}) }
.rela.rodata ${RELOCATING-0} : { *(.rela.rodata${RELOCATING+ .rela.rodata.* .rela.gnu.linkonce.r.*}) }
${OTHER_READONLY_RELOC_SECTIONS}
- .rel.data.rel.ro ${RELOCATING-0} : { *(.rel.data.rel.ro${RELOCATING+*}) }
- .rela.data.rel.ro ${RELOCATING-0} : { *(.rel.data.rel.ro${RELOCATING+*}) }
+ .rel.data.rel.ro ${RELOCATING-0} : { *(.rel.data.rel.ro${RELOCATING+* .rel.gnu.linkonce.d.rel.ro.*}) }
+ .rela.data.rel.ro ${RELOCATING-0} : { *(.rela.data.rel.ro${RELOCATING+* .rela.gnu.linkonce.d.rel.ro.*}) }
.rel.data ${RELOCATING-0} : { *(.rel.data${RELOCATING+ .rel.data.* .rel.gnu.linkonce.d.*}) }
.rela.data ${RELOCATING-0} : { *(.rela.data${RELOCATING+ .rela.data.* .rela.gnu.linkonce.d.*}) }
.rel.tdata ${RELOCATING-0} : { *(.rel.tdata${RELOCATING+ .rel.tdata.* .rel.gnu.linkonce.td.*}) }
@@ -273,6 +327,7 @@ eval $COMBRELOCCAT <<EOF
${REL_SBSS2}
.rel.bss ${RELOCATING-0} : { *(.rel.bss${RELOCATING+ .rel.bss.* .rel.gnu.linkonce.b.*}) }
.rela.bss ${RELOCATING-0} : { *(.rela.bss${RELOCATING+ .rela.bss.* .rela.gnu.linkonce.b.*}) }
+ ${REL_LARGE}
EOF
if [ -n "$COMBRELOC" ]; then
cat <<EOF
@@ -298,7 +353,8 @@ cat <<EOF
${RELOCATING-$INIT_LIT}
${RELOCATING-$INIT}
- ${DATA_PLT-${BSS_PLT-${PLT}}}
+ ${TEXT_PLT+${PLT}}
+ ${TINY_READONLY_SECTION}
.text ${RELOCATING-0} :
{
*(.got.plt* .plt*)
@@ -309,7 +365,7 @@ cat <<EOF
${RELOCATING+${INIT_END}}
${RELOCATING+${TEXT_START_SYMBOLS}}
- *(.literal .text .stub${RELOCATING+ .text.* .gnu.linkonce.literal.* .gnu.linkonce.t.*.literal .gnu.linkonce.t.*})
+ *(.literal .text .stub${RELOCATING+ .literal.* .text.* .gnu.linkonce.literal.* .gnu.linkonce.t.*.literal .gnu.linkonce.t.*})
KEEP (*(.text.*personality*))
/* .gnu.warning sections are handled specially by elf32.em. */
*(.gnu.warning)
@@ -334,7 +390,7 @@ cat <<EOF
${OTHER_READONLY_SECTIONS}
.eh_frame_hdr : { *(.eh_frame_hdr) }
.eh_frame ${RELOCATING-0} : ONLY_IF_RO { KEEP (*(.eh_frame)) }
- .gcc_except_table ${RELOCATING-0} : ONLY_IF_RO { KEEP (*(.gcc_except_table)) *(.gcc_except_table.*) }
+ .gcc_except_table ${RELOCATING-0} : ONLY_IF_RO { *(.gcc_except_table .gcc_except_table.*) }
/* Adjust the address for the data segment. We want to adjust up to
the same address within the page on the next page up. */
@@ -344,7 +400,7 @@ cat <<EOF
/* Exception handling */
.eh_frame ${RELOCATING-0} : ONLY_IF_RW { KEEP (*(.eh_frame)) }
- .gcc_except_table ${RELOCATING-0} : ONLY_IF_RW { KEEP (*(.gcc_except_table)) *(.gcc_except_table.*) }
+ .gcc_except_table ${RELOCATING-0} : ONLY_IF_RW { *(.gcc_except_table .gcc_except_table.*) }
/* Thread Local Storage sections */
.tdata ${RELOCATING-0} : { *(.tdata${RELOCATING+ .tdata.* .gnu.linkonce.td.*}) }
@@ -352,25 +408,24 @@ cat <<EOF
.preinit_array ${RELOCATING-0} :
{
- ${RELOCATING+${CREATE_SHLIB-PROVIDE_HIDDEN (__preinit_array_start = .);}}
+ ${RELOCATING+${CREATE_SHLIB-PROVIDE_HIDDEN (${USER_LABEL_PREFIX}__preinit_array_start = .);}}
KEEP (*(.preinit_array))
- ${RELOCATING+${CREATE_SHLIB-PROVIDE_HIDDEN (__preinit_array_end = .);}}
+ ${RELOCATING+${CREATE_SHLIB-PROVIDE_HIDDEN (${USER_LABEL_PREFIX}__preinit_array_end = .);}}
}
.init_array ${RELOCATING-0} :
{
- ${RELOCATING+${CREATE_SHLIB-PROVIDE_HIDDEN (__init_array_start = .);}}
+ ${RELOCATING+${CREATE_SHLIB-PROVIDE_HIDDEN (${USER_LABEL_PREFIX}__init_array_start = .);}}
KEEP (*(SORT(.init_array.*)))
KEEP (*(.init_array))
- ${RELOCATING+${CREATE_SHLIB-PROVIDE_HIDDEN (__init_array_end = .);}}
+ ${RELOCATING+${CREATE_SHLIB-PROVIDE_HIDDEN (${USER_LABEL_PREFIX}__init_array_end = .);}}
}
.fini_array ${RELOCATING-0} :
{
- ${RELOCATING+${CREATE_SHLIB-PROVIDE_HIDDEN (__fini_array_start = .);}}
+ ${RELOCATING+${CREATE_SHLIB-PROVIDE_HIDDEN (${USER_LABEL_PREFIX}__fini_array_start = .);}}
KEEP (*(.fini_array))
KEEP (*(SORT(.fini_array.*)))
- ${RELOCATING+${CREATE_SHLIB-PROVIDE_HIDDEN (__fini_array_end = .);}}
+ ${RELOCATING+${CREATE_SHLIB-PROVIDE_HIDDEN (${USER_LABEL_PREFIX}__fini_array_end = .);}}
}
-
${SMALL_DATA_CTOR-${RELOCATING+${CTOR}}}
${SMALL_DATA_DTOR-${RELOCATING+${DTOR}}}
.jcr ${RELOCATING-0} : { KEEP (*(.jcr)) }
@@ -391,7 +446,7 @@ cat <<EOF
{
${RELOCATING+${DATA_START_SYMBOLS}}
*(.data${RELOCATING+ .data.* .gnu.linkonce.d.*})
- KEEP (*(.gnu.linkonce.d.*personality*))
+ ${RELOCATING+KEEP (*(.gnu.linkonce.d.*personality*))}
${CONSTRUCTING+SORT(CONSTRUCTORS)}
}
.data1 ${RELOCATING-0} : { *(.data1) }
@@ -405,7 +460,7 @@ cat <<EOF
${SDATA_GOT+${OTHER_GOT_SECTIONS}}
${SDATA}
${OTHER_SDATA_SECTIONS}
- ${RELOCATING+${DATA_END_SYMBOLS-_edata = .; PROVIDE (edata = .);}}
+ ${RELOCATING+${DATA_END_SYMBOLS-${USER_LABEL_PREFIX}_edata = .; PROVIDE (${USER_LABEL_PREFIX}edata = .);}}
${RELOCATING+__bss_start = .;}
${RELOCATING+${OTHER_BSS_SYMBOLS}}
${SBSS}
@@ -417,14 +472,18 @@ cat <<EOF
*(COMMON)
/* Align here to ensure that the .bss section occupies space up to
_end. Align after .bss to ensure correct alignment even if the
- .bss section disappears because there are no input sections. */
- ${RELOCATING+. = ALIGN(${ALIGNMENT});}
+ .bss section disappears because there are no input sections.
+ FIXME: Why do we need it? When there is no .bss section, we don't
+ pad the .data section. */
+ ${RELOCATING+. = ALIGN(. != 0 ? ${ALIGNMENT} : 1);}
}
+ ${OTHER_BSS_SECTIONS}
${RELOCATING+${OTHER_BSS_END_SYMBOLS}}
${RELOCATING+. = ALIGN(${ALIGNMENT});}
+ ${LARGE_SECTIONS}
+ ${RELOCATING+. = ALIGN(${ALIGNMENT});}
${RELOCATING+${OTHER_END_SYMBOLS}}
- ${RELOCATING+_end = .;}
- ${RELOCATING+PROVIDE (end = .);}
+ ${RELOCATING+${END_SYMBOLS-${USER_LABEL_PREFIX}_end = .; PROVIDE (${USER_LABEL_PREFIX}end = .);}}
${RELOCATING+${DATA_SEGMENT_END}}
/* Stabs debugging sections. */
@@ -454,7 +513,7 @@ cat <<EOF
.debug_pubnames 0 : { *(.debug_pubnames) }
/* DWARF 2 */
- .debug_info 0 : { *(.debug_info .gnu.linkonce.wi.*) }
+ .debug_info 0 : { *(.debug_info${RELOCATING+ .gnu.linkonce.wi.*}) }
.debug_abbrev 0 : { *(.debug_abbrev) }
.debug_line 0 : { *(.debug_line) }
.debug_frame 0 : { *(.debug_frame) }
@@ -468,7 +527,15 @@ cat <<EOF
.debug_typenames 0 : { *(.debug_typenames) }
.debug_varnames 0 : { *(.debug_varnames) }
+ /* DWARF 3 */
+ .debug_pubtypes 0 : { *(.debug_pubtypes) }
+ .debug_ranges 0 : { *(.debug_ranges) }
+
+ ${TINY_DATA_SECTION}
+ ${TINY_BSS_SECTION}
+
${STACK_ADDR+${STACK}}
+ ${ATTRS_SECTIONS}
${OTHER_SECTIONS}
${RELOCATING+${OTHER_SYMBOLS}}
${RELOCATING+${STACKNOTE}}
diff --git a/ld/scripttempl/iq2000.sc b/ld/scripttempl/iq2000.sc
index b0872643153d..b1e0cf4bfaca 100644
--- a/ld/scripttempl/iq2000.sc
+++ b/ld/scripttempl/iq2000.sc
@@ -83,14 +83,15 @@ CTOR=".ctors ${CONSTRUCTING-0} :
doesn't matter which directory crtbegin.o
is in. */
- KEEP (*crtbegin*.o(.ctors))
+ KEEP (*crtbegin.o(.ctors))
+ KEEP (*crtbegin?.o(.ctors))
/* We don't want to include the .ctor section from
the crtend.o file until after the sorted ctors.
The .ctor section from the crtend file contains the
end of ctors marker and it must be last */
- KEEP (*(EXCLUDE_FILE (*crtend*.o $OTHER_EXCLUDE_FILES) .ctors))
+ KEEP (*(EXCLUDE_FILE (*crtend.o *crtend?.o $OTHER_EXCLUDE_FILES) .ctors))
KEEP (*(SORT(.ctors.*)))
KEEP (*(.ctors))
${CONSTRUCTING+${CTOR_END}}
@@ -99,8 +100,9 @@ CTOR=".ctors ${CONSTRUCTING-0} :
DTOR=" .dtors ${CONSTRUCTING-0} :
{
${CONSTRUCTING+${DTOR_START}}
- KEEP (*crtbegin*.o(.dtors))
- KEEP (*(EXCLUDE_FILE (*crtend*.o $OTHER_EXCLUDE_FILES) .dtors))
+ KEEP (*crtbegin.o(.dtors))
+ KEEP (*crtbegin?.o(.dtors))
+ KEEP (*(EXCLUDE_FILE (*crtend.o *crtend?.o $OTHER_EXCLUDE_FILES) .dtors))
KEEP (*(SORT(.dtors.*)))
KEEP (*(.dtors))
${CONSTRUCTING+${DTOR_END}}
diff --git a/ld/scripttempl/mep.sc b/ld/scripttempl/mep.sc
new file mode 100644
index 000000000000..0d459c65b0a8
--- /dev/null
+++ b/ld/scripttempl/mep.sc
@@ -0,0 +1,446 @@
+#
+# Unusual variables checked by this code:
+# NOP - four byte opcode for no-op (defaults to 0)
+# NO_SMALL_DATA - no .sbss/.sbss2/.sdata/.sdata2 sections if not
+# empty.
+# SMALL_DATA_CTOR - .ctors contains small data.
+# SMALL_DATA_DTOR - .dtors contains small data.
+# DATA_ADDR - if end-of-text-plus-one-page isn't right for data start
+# INITIAL_READONLY_SECTIONS - at start of text segment
+# OTHER_READONLY_SECTIONS - other than .text .init .rodata ...
+# (e.g., .PARISC.milli)
+# OTHER_TEXT_SECTIONS - these get put in .text when relocating
+# OTHER_READWRITE_SECTIONS - other than .data .bss .ctors .sdata ...
+# (e.g., .PARISC.global)
+# OTHER_RELRO_SECTIONS - other than .data.rel.ro ...
+# (e.g. PPC32 .fixup, .got[12])
+# OTHER_BSS_SECTIONS - other than .bss .sbss ...
+# OTHER_SECTIONS - at the end
+# EXECUTABLE_SYMBOLS - symbols that must be defined for an
+# executable (e.g., _DYNAMIC_LINK)
+# TEXT_START_ADDR - the first byte of the text segment, after any
+# headers.
+# TEXT_BASE_ADDRESS - the first byte of the text segment.
+# TEXT_START_SYMBOLS - symbols that appear at the start of the
+# .text section.
+# DATA_START_SYMBOLS - symbols that appear at the start of the
+# .data section.
+# OTHER_GOT_SYMBOLS - symbols defined just before .got.
+# OTHER_GOT_SECTIONS - sections just after .got.
+# OTHER_SDATA_SECTIONS - sections just after .sdata.
+# OTHER_BSS_SYMBOLS - symbols that appear at the start of the
+# .bss section besides __bss_start.
+# DATA_PLT - .plt should be in data segment, not text segment.
+# PLT_BEFORE_GOT - .plt just before .got when .plt is in data segement.
+# BSS_PLT - .plt should be in bss segment
+# TEXT_DYNAMIC - .dynamic in text segment, not data segment.
+# EMBEDDED - whether this is for an embedded system.
+# SHLIB_TEXT_START_ADDR - if set, add to SIZEOF_HEADERS to set
+# start address of shared library.
+# INPUT_FILES - INPUT command of files to always include
+# WRITABLE_RODATA - if set, the .rodata section should be writable
+# INIT_START, INIT_END - statements just before and just after
+# combination of .init sections.
+# FINI_START, FINI_END - statements just before and just after
+# combination of .fini sections.
+# STACK_ADDR - start of a .stack section.
+# OTHER_END_SYMBOLS - symbols to place right at the end of the script.
+# SEPARATE_GOTPLT - if set, .got.plt should be separate output section,
+# so that .got can be in the RELRO area. It should be set to
+# the number of bytes in the beginning of .got.plt which can be
+# in the RELRO area as well.
+#
+# When adding sections, do note that the names of some sections are used
+# when specifying the start address of the next.
+#
+
+# Many sections come in three flavours. There is the 'real' section,
+# like ".data". Then there are the per-procedure or per-variable
+# sections, generated by -ffunction-sections and -fdata-sections in GCC,
+# and useful for --gc-sections, which for a variable "foo" might be
+# ".data.foo". Then there are the linkonce sections, for which the linker
+# eliminates duplicates, which are named like ".gnu.linkonce.d.foo".
+# The exact correspondences are:
+#
+# Section Linkonce section
+# .text .gnu.linkonce.t.foo
+# .rodata .gnu.linkonce.r.foo
+# .data .gnu.linkonce.d.foo
+# .bss .gnu.linkonce.b.foo
+# .sdata .gnu.linkonce.s.foo
+# .sbss .gnu.linkonce.sb.foo
+# .sdata2 .gnu.linkonce.s2.foo
+# .sbss2 .gnu.linkonce.sb2.foo
+# .debug_info .gnu.linkonce.wi.foo
+# .tdata .gnu.linkonce.td.foo
+# .tbss .gnu.linkonce.tb.foo
+#
+# Each of these can also have corresponding .rel.* and .rela.* sections.
+
+test -z "$ENTRY" && ENTRY=_start
+test -z "${BIG_OUTPUT_FORMAT}" && BIG_OUTPUT_FORMAT=${OUTPUT_FORMAT}
+test -z "${LITTLE_OUTPUT_FORMAT}" && LITTLE_OUTPUT_FORMAT=${OUTPUT_FORMAT}
+if [ -z "$MACHINE" ]; then OUTPUT_ARCH=${ARCH}; else OUTPUT_ARCH=${ARCH}:${MACHINE}; fi
+test -z "${ELFSIZE}" && ELFSIZE=32
+test -z "${ALIGNMENT}" && ALIGNMENT="${ELFSIZE} / 8"
+test "$LD_FLAG" = "N" && DATA_ADDR=.
+test -n "$CREATE_SHLIB$CREATE_PIE" && test -n "$SHLIB_DATA_ADDR" && COMMONPAGESIZE=""
+test -z "$CREATE_SHLIB$CREATE_PIE" && test -n "$DATA_ADDR" && COMMONPAGESIZE=""
+test -n "$RELRO_NOW" && unset SEPARATE_GOTPLT
+DATA_SEGMENT_ALIGN="ALIGN(${SEGMENT_SIZE}) + (. & (${MAXPAGESIZE} - 1))"
+DATA_SEGMENT_RELRO_END=""
+DATA_SEGMENT_RELRO_GOTPLT_END=""
+DATA_SEGMENT_END=""
+if test -n "${COMMONPAGESIZE}"; then
+ DATA_SEGMENT_ALIGN="ALIGN (${SEGMENT_SIZE}) - ((${MAXPAGESIZE} - .) & (${MAXPAGESIZE} - 1)); . = DATA_SEGMENT_ALIGN (${MAXPAGESIZE}, ${COMMONPAGESIZE})"
+ DATA_SEGMENT_END=". = DATA_SEGMENT_END (.);"
+ if test -n "${SEPARATE_GOTPLT}"; then
+ DATA_SEGMENT_RELRO_GOTPLT_END=". = DATA_SEGMENT_RELRO_END (${SEPARATE_GOTPLT}, .);"
+ else
+ DATA_SEGMENT_RELRO_END=". = DATA_SEGMENT_RELRO_END (0, .);"
+ fi
+fi
+INTERP=".interp ${RELOCATING-0} : { *(.interp) }"
+PLT=".plt ${RELOCATING-0} : { *(.plt) }"
+if test -z "$GOT"; then
+ if test -z "$SEPARATE_GOTPLT"; then
+ GOT=".got ${RELOCATING-0} : { *(.got.plt) *(.got) }"
+ else
+ GOT=".got ${RELOCATING-0} : { *(.got) }"
+ GOTPLT="${RELOCATING+${DATA_SEGMENT_RELRO_GOTPLT_END}}
+ .got.plt ${RELOCATING-0} : { *(.got.plt) }"
+ fi
+fi
+DYNAMIC=".dynamic ${RELOCATING-0} : { *(.dynamic) }"
+RODATA=".rodata ${RELOCATING-0} : { *(.rodata${RELOCATING+ .rodata.* .gnu.linkonce.r.*}) }"
+DATARELRO=".data.rel.ro : { *(.data.rel.ro.local) *(.data.rel.ro*) }"
+STACKNOTE="/DISCARD/ : { *(.note.GNU-stack) }"
+if test -z "${NO_SMALL_DATA}"; then
+ SBSS=".sbss ${RELOCATING-0} :
+ {
+ ${RELOCATING+PROVIDE (__sbss_start = .);}
+ ${RELOCATING+PROVIDE (___sbss_start = .);}
+ ${CREATE_SHLIB+*(.sbss2 .sbss2.* .gnu.linkonce.sb2.*)}
+ *(.dynsbss)
+ *(.sbss${RELOCATING+ .sbss.* .gnu.linkonce.sb.*})
+ *(.scommon)
+ ${RELOCATING+PROVIDE (__sbss_end = .);}
+ ${RELOCATING+PROVIDE (___sbss_end = .);}
+ }"
+ SBSS2=".sbss2 ${RELOCATING-0} : { *(.sbss2${RELOCATING+ .sbss2.* .gnu.linkonce.sb2.*}) }"
+ SDATA="/* We want the small data sections together, so single-instruction offsets
+ can access them all, and initialized data all before uninitialized, so
+ we can shorten the on-disk segment size. */
+ .sdata ${RELOCATING-0} :
+ {
+ ${RELOCATING+${SDATA_START_SYMBOLS}}
+ ${CREATE_SHLIB+*(.sdata2 .sdata2.* .gnu.linkonce.s2.*)}
+ *(.sdata${RELOCATING+ .sdata.* .gnu.linkonce.s.*})
+ }"
+ SDATA2=".sdata2 ${RELOCATING-0} : { *(.sdata2${RELOCATING+ .sdata2.* .gnu.linkonce.s2.*}) }"
+ REL_SDATA=".rel.sdata ${RELOCATING-0} : { *(.rel.sdata${RELOCATING+ .rel.sdata.* .rel.gnu.linkonce.s.*}) }
+ .rela.sdata ${RELOCATING-0} : { *(.rela.sdata${RELOCATING+ .rela.sdata.* .rela.gnu.linkonce.s.*}) }"
+ REL_SBSS=".rel.sbss ${RELOCATING-0} : { *(.rel.sbss${RELOCATING+ .rel.sbss.* .rel.gnu.linkonce.sb.*}) }
+ .rela.sbss ${RELOCATING-0} : { *(.rela.sbss${RELOCATING+ .rela.sbss.* .rela.gnu.linkonce.sb.*}) }"
+ REL_SDATA2=".rel.sdata2 ${RELOCATING-0} : { *(.rel.sdata2${RELOCATING+ .rel.sdata2.* .rel.gnu.linkonce.s2.*}) }
+ .rela.sdata2 ${RELOCATING-0} : { *(.rela.sdata2${RELOCATING+ .rela.sdata2.* .rela.gnu.linkonce.s2.*}) }"
+ REL_SBSS2=".rel.sbss2 ${RELOCATING-0} : { *(.rel.sbss2${RELOCATING+ .rel.sbss2.* .rel.gnu.linkonce.sb2.*}) }
+ .rela.sbss2 ${RELOCATING-0} : { *(.rela.sbss2${RELOCATING+ .rela.sbss2.* .rela.gnu.linkonce.sb2.*}) }"
+else
+ NO_SMALL_DATA=" "
+fi
+test -n "$SEPARATE_GOTPLT" && SEPARATE_GOTPLT=" "
+CTOR=".ctors ${CONSTRUCTING-0} :
+ {
+ ${CONSTRUCTING+${CTOR_START}}
+ /* gcc uses crtbegin.o to find the start of
+ the constructors, so we make sure it is
+ first. Because this is a wildcard, it
+ doesn't matter if the user does not
+ actually link against crtbegin.o; the
+ linker won't look for a file to match a
+ wildcard. The wildcard also means that it
+ doesn't matter which directory crtbegin.o
+ is in. */
+
+ KEEP (*crtbegin*.o(.ctors))
+
+ /* We don't want to include the .ctor section from
+ from the crtend.o file until after the sorted ctors.
+ The .ctor section from the crtend file contains the
+ end of ctors marker and it must be last */
+
+ KEEP (*(EXCLUDE_FILE (*crtend*.o $OTHER_EXCLUDE_FILES) .ctors))
+ KEEP (*(SORT(.ctors.*)))
+ KEEP (*(.ctors))
+ ${CONSTRUCTING+${CTOR_END}}
+ }"
+DTOR=".dtors ${CONSTRUCTING-0} :
+ {
+ ${CONSTRUCTING+${DTOR_START}}
+ KEEP (*crtbegin*.o(.dtors))
+ KEEP (*(EXCLUDE_FILE (*crtend*.o $OTHER_EXCLUDE_FILES) .dtors))
+ KEEP (*(SORT(.dtors.*)))
+ KEEP (*(.dtors))
+ ${CONSTRUCTING+${DTOR_END}}
+ }"
+STACK=" .stack ${RELOCATING-0}${RELOCATING+${STACK_ADDR}} :
+ {
+ ${RELOCATING+_stack = .;}
+ *(.stack)
+ }"
+
+# if this is for an embedded system, don't add SIZEOF_HEADERS.
+if [ -z "$EMBEDDED" ]; then
+ test -z "${TEXT_BASE_ADDRESS}" && TEXT_BASE_ADDRESS="${TEXT_START_ADDR} + SIZEOF_HEADERS"
+else
+ test -z "${TEXT_BASE_ADDRESS}" && TEXT_BASE_ADDRESS="${TEXT_START_ADDR}"
+fi
+
+cat <<EOF
+OUTPUT_FORMAT("${OUTPUT_FORMAT}", "${BIG_OUTPUT_FORMAT}",
+ "${LITTLE_OUTPUT_FORMAT}")
+OUTPUT_ARCH(${OUTPUT_ARCH})
+ENTRY(${ENTRY})
+
+${RELOCATING+${LIB_SEARCH_DIRS}}
+${RELOCATING+/* Do we need any of these for elf?
+ __DYNAMIC = 0; ${STACKZERO+${STACKZERO}} ${SHLIB_PATH+${SHLIB_PATH}} */}
+${RELOCATING+${EXECUTABLE_SYMBOLS}}
+${RELOCATING+${INPUT_FILES}}
+${RELOCATING- /* For some reason, the Solaris linker makes bad executables
+ if gld -r is used and the intermediate file has sections starting
+ at non-zero addresses. Could be a Solaris ld bug, could be a GNU ld
+ bug. But for now assigning the zero vmas works. */}
+
+SECTIONS
+{
+ /* Read-only sections, merged into text segment: */
+ ${CREATE_SHLIB-${CREATE_PIE-${RELOCATING+PROVIDE (__executable_start = ${TEXT_START_ADDR}); . = ${TEXT_BASE_ADDRESS};}}}
+ ${CREATE_SHLIB+${RELOCATING+. = ${SHLIB_TEXT_START_ADDR:-0} + SIZEOF_HEADERS;}}
+ ${CREATE_PIE+${RELOCATING+. = ${SHLIB_TEXT_START_ADDR:-0} + SIZEOF_HEADERS;}}
+ ${CREATE_SHLIB-${INTERP}}
+ ${INITIAL_READONLY_SECTIONS}
+ ${TEXT_DYNAMIC+${DYNAMIC}}
+ .hash ${RELOCATING-0} : { *(.hash) }
+ .dynsym ${RELOCATING-0} : { *(.dynsym) }
+ .dynstr ${RELOCATING-0} : { *(.dynstr) }
+ .gnu.version ${RELOCATING-0} : { *(.gnu.version) }
+ .gnu.version_d ${RELOCATING-0}: { *(.gnu.version_d) }
+ .gnu.version_r ${RELOCATING-0}: { *(.gnu.version_r) }
+
+EOF
+if [ "x$COMBRELOC" = x ]; then
+ COMBRELOCCAT=cat
+else
+ COMBRELOCCAT="cat > $COMBRELOC"
+fi
+eval $COMBRELOCCAT <<EOF
+ .rel.init ${RELOCATING-0} : { *(.rel.init) }
+ .rela.init ${RELOCATING-0} : { *(.rela.init) }
+ .rel.text ${RELOCATING-0} : { *(.rel.text${RELOCATING+ .rel.text.* .rel.gnu.linkonce.t.*}) }
+ .rela.text ${RELOCATING-0} : { *(.rela.text${RELOCATING+ .rela.text.* .rela.gnu.linkonce.t.*}) }
+ .rel.fini ${RELOCATING-0} : { *(.rel.fini) }
+ .rela.fini ${RELOCATING-0} : { *(.rela.fini) }
+ .rel.rodata ${RELOCATING-0} : { *(.rel.rodata${RELOCATING+ .rel.rodata.* .rel.gnu.linkonce.r.*}) }
+ .rela.rodata ${RELOCATING-0} : { *(.rela.rodata${RELOCATING+ .rela.rodata.* .rela.gnu.linkonce.r.*}) }
+ ${OTHER_READONLY_RELOC_SECTIONS}
+ .rel.data.rel.ro ${RELOCATING-0} : { *(.rel.data.rel.ro${RELOCATING+*}) }
+ .rela.data.rel.ro ${RELOCATING-0} : { *(.rel.data.rel.ro${RELOCATING+*}) }
+ .rel.data ${RELOCATING-0} : { *(.rel.data${RELOCATING+ .rel.data.* .rel.gnu.linkonce.d.*}) }
+ .rela.data ${RELOCATING-0} : { *(.rela.data${RELOCATING+ .rela.data.* .rela.gnu.linkonce.d.*}) }
+ .rel.tdata ${RELOCATING-0} : { *(.rel.tdata${RELOCATING+ .rel.tdata.* .rel.gnu.linkonce.td.*}) }
+ .rela.tdata ${RELOCATING-0} : { *(.rela.tdata${RELOCATING+ .rela.tdata.* .rela.gnu.linkonce.td.*}) }
+ .rel.tbss ${RELOCATING-0} : { *(.rel.tbss${RELOCATING+ .rel.tbss.* .rel.gnu.linkonce.tb.*}) }
+ .rela.tbss ${RELOCATING-0} : { *(.rela.tbss${RELOCATING+ .rela.tbss.* .rela.gnu.linkonce.tb.*}) }
+ .rel.ctors ${RELOCATING-0} : { *(.rel.ctors) }
+ .rela.ctors ${RELOCATING-0} : { *(.rela.ctors) }
+ .rel.dtors ${RELOCATING-0} : { *(.rel.dtors) }
+ .rela.dtors ${RELOCATING-0} : { *(.rela.dtors) }
+ .rel.got ${RELOCATING-0} : { *(.rel.got) }
+ .rela.got ${RELOCATING-0} : { *(.rela.got) }
+ ${OTHER_GOT_RELOC_SECTIONS}
+ ${REL_SDATA}
+ ${REL_SBSS}
+ ${REL_SDATA2}
+ ${REL_SBSS2}
+ .rel.bss ${RELOCATING-0} : { *(.rel.bss${RELOCATING+ .rel.bss.* .rel.gnu.linkonce.b.*}) }
+ .rela.bss ${RELOCATING-0} : { *(.rela.bss${RELOCATING+ .rela.bss.* .rela.gnu.linkonce.b.*}) }
+EOF
+if [ -n "$COMBRELOC" ]; then
+cat <<EOF
+ .rel.dyn ${RELOCATING-0} :
+ {
+EOF
+sed -e '/^[ ]*[{}][ ]*$/d;/:[ ]*$/d;/\.rela\./d;s/^.*: { *\(.*\)}$/ \1/' $COMBRELOC
+cat <<EOF
+ }
+ .rela.dyn ${RELOCATING-0} :
+ {
+EOF
+sed -e '/^[ ]*[{}][ ]*$/d;/:[ ]*$/d;/\.rel\./d;s/^.*: { *\(.*\)}/ \1/' $COMBRELOC
+cat <<EOF
+ }
+EOF
+fi
+cat <<EOF
+ .rel.plt ${RELOCATING-0} : { *(.rel.plt) }
+ .rela.plt ${RELOCATING-0} : { *(.rela.plt) }
+ ${OTHER_PLT_RELOC_SECTIONS}
+
+ .init ${RELOCATING-0} :
+ {
+ ${RELOCATING+${INIT_START}}
+ KEEP (*(.init))
+ ${RELOCATING+${INIT_END}}
+ } =${NOP-0}
+
+ ${DATA_PLT-${BSS_PLT-${PLT}}}
+ .text ${RELOCATING-0} :
+ {
+ ${RELOCATING+${TEXT_START_SYMBOLS}}
+ *(.text .stub${RELOCATING+ .text.* .gnu.linkonce.t.*})
+ KEEP (*(.text.*personality*))
+ /* .gnu.warning sections are handled specially by elf32.em. */
+ *(.gnu.warning)
+ ${RELOCATING+${OTHER_TEXT_SECTIONS}}
+ } =${NOP-0}
+ .fini ${RELOCATING-0} :
+ {
+ ${RELOCATING+${FINI_START}}
+ KEEP (*(.fini))
+ ${RELOCATING+${FINI_END}}
+ } =${NOP-0}
+ ${RELOCATING+PROVIDE (__etext = .);}
+ ${RELOCATING+PROVIDE (_etext = .);}
+ ${RELOCATING+PROVIDE (etext = .);}
+ ${WRITABLE_RODATA-${RODATA}}
+ .rodata1 ${RELOCATING-0} : { *(.rodata1) }
+ ${CREATE_SHLIB-${SDATA2}}
+ ${CREATE_SHLIB-${SBSS2}}
+ ${OTHER_READONLY_SECTIONS}
+ .eh_frame_hdr : { *(.eh_frame_hdr) }
+ .eh_frame ${RELOCATING-0} : ONLY_IF_RO { KEEP (*(.eh_frame)) }
+ .gcc_except_table ${RELOCATING-0} : ONLY_IF_RO { KEEP (*(.gcc_except_table)) *(.gcc_except_table.*) }
+
+ /* Adjust the address for the data segment. We want to adjust up to
+ the same address within the page on the next page up. */
+ ${CREATE_SHLIB-${CREATE_PIE-${RELOCATING+. = ${DATA_ADDR-${DATA_SEGMENT_ALIGN}};}}}
+ ${CREATE_SHLIB+${RELOCATING+. = ${SHLIB_DATA_ADDR-${DATA_SEGMENT_ALIGN}};}}
+ ${CREATE_PIE+${RELOCATING+. = ${SHLIB_DATA_ADDR-${DATA_SEGMENT_ALIGN}};}}
+
+ /* Exception handling */
+ .eh_frame ${RELOCATING-0} : ONLY_IF_RW { KEEP (*(.eh_frame)) }
+ .gcc_except_table ${RELOCATING-0} : ONLY_IF_RW { KEEP (*(.gcc_except_table)) *(.gcc_except_table.*) }
+
+ /* Thread Local Storage sections */
+ .tdata ${RELOCATING-0} : { *(.tdata${RELOCATING+ .tdata.* .gnu.linkonce.td.*}) }
+ .tbss ${RELOCATING-0} : { *(.tbss${RELOCATING+ .tbss.* .gnu.linkonce.tb.*})${RELOCATING+ *(.tcommon)} }
+
+ .preinit_array ${RELOCATING-0} : { KEEP (*(.preinit_array)) }
+ .init_array ${RELOCATING-0} : { KEEP (*(.init_array)) }
+ .fini_array ${RELOCATING-0} : { KEEP (*(.fini_array)) }
+
+ ${SMALL_DATA_CTOR-${RELOCATING+${CTOR}}}
+ ${SMALL_DATA_DTOR-${RELOCATING+${DTOR}}}
+ .jcr ${RELOCATING-0} : { KEEP (*(.jcr)) }
+
+ ${RELOCATING+${DATARELRO}}
+ ${OTHER_RELRO_SECTIONS}
+ ${TEXT_DYNAMIC-${DYNAMIC}}
+ ${NO_SMALL_DATA+${RELRO_NOW+${GOT}}}
+ ${NO_SMALL_DATA+${RELRO_NOW-${SEPARATE_GOTPLT+${GOT}}}}
+ ${NO_SMALL_DATA+${RELRO_NOW-${SEPARATE_GOTPLT+${GOTPLT}}}}
+ ${RELOCATING+${DATA_SEGMENT_RELRO_END}}
+ ${NO_SMALL_DATA+${RELRO_NOW-${SEPARATE_GOTPLT-${GOT}}}}
+
+ ${DATA_PLT+${PLT_BEFORE_GOT-${PLT}}}
+
+ .data ${RELOCATING-0} :
+ {
+ ${RELOCATING+${DATA_START_SYMBOLS}}
+ *(.data${RELOCATING+ .data.* .gnu.linkonce.d.*})
+ KEEP (*(.gnu.linkonce.d.*personality*))
+ ${CONSTRUCTING+SORT(CONSTRUCTORS)}
+ }
+ .data1 ${RELOCATING-0} : { *(.data1) }
+ ${WRITABLE_RODATA+${RODATA}}
+ ${OTHER_READWRITE_SECTIONS}
+ ${SMALL_DATA_CTOR+${RELOCATING+${CTOR}}}
+ ${SMALL_DATA_DTOR+${RELOCATING+${DTOR}}}
+ ${DATA_PLT+${PLT_BEFORE_GOT+${PLT}}}
+ ${RELOCATING+${OTHER_GOT_SYMBOLS}}
+ ${NO_SMALL_DATA-${GOT}}
+ ${OTHER_GOT_SECTIONS}
+ ${SDATA}
+ ${OTHER_SDATA_SECTIONS}
+ ${RELOCATING+_edata = .;}
+ ${RELOCATING+PROVIDE (edata = .);}
+ ${RELOCATING+__bss_start = .;}
+ ${RELOCATING+${OTHER_BSS_SYMBOLS}}
+ ${SBSS}
+ ${BSS_PLT+${PLT}}
+ .bss ${RELOCATING-0} :
+ {
+ *(.dynbss)
+ *(.bss${RELOCATING+ .bss.* .gnu.linkonce.b.*})
+ *(COMMON)
+ /* Align here to ensure that the .bss section occupies space up to
+ _end. Align after .bss to ensure correct alignment even if the
+ .bss section disappears because there are no input sections. */
+ ${RELOCATING+. = ALIGN(${ALIGNMENT});}
+ }
+ ${OTHER_BSS_SECTIONS}
+ ${RELOCATING+. = ALIGN(${ALIGNMENT});}
+ ${RELOCATING+_end = .;}
+ ${RELOCATING+${OTHER_BSS_END_SYMBOLS}}
+ ${RELOCATING+PROVIDE (end = .);}
+ ${RELOCATING+${DATA_SEGMENT_END}}
+
+ /* Stabs debugging sections. */
+ .stab 0 : { *(.stab) }
+ .stabstr 0 : { *(.stabstr) }
+ .stab.excl 0 : { *(.stab.excl) }
+ .stab.exclstr 0 : { *(.stab.exclstr) }
+ .stab.index 0 : { *(.stab.index) }
+ .stab.indexstr 0 : { *(.stab.indexstr) }
+
+ .comment 0 : { *(.comment) }
+
+ /* DWARF debug sections.
+ Symbols in the DWARF debugging sections are relative to the beginning
+ of the section so we begin them at 0. */
+
+ /* DWARF 1 */
+ .debug 0 : { *(.debug) }
+ .line 0 : { *(.line) }
+
+ /* GNU DWARF 1 extensions */
+ .debug_srcinfo 0 : { *(.debug_srcinfo) }
+ .debug_sfnames 0 : { *(.debug_sfnames) }
+
+ /* DWARF 1.1 and DWARF 2 */
+ .debug_aranges 0 : { *(.debug_aranges) }
+ .debug_pubnames 0 : { *(.debug_pubnames) }
+
+ /* DWARF 2 */
+ .debug_info 0 : { *(.debug_info .gnu.linkonce.wi.*) }
+ .debug_abbrev 0 : { *(.debug_abbrev) }
+ .debug_line 0 : { *(.debug_line) }
+ .debug_frame 0 : { *(.debug_frame) }
+ .debug_str 0 : { *(.debug_str) }
+ .debug_loc 0 : { *(.debug_loc) }
+ .debug_macinfo 0 : { *(.debug_macinfo) }
+
+ /* SGI/MIPS DWARF 2 extensions */
+ .debug_weaknames 0 : { *(.debug_weaknames) }
+ .debug_funcnames 0 : { *(.debug_funcnames) }
+ .debug_typenames 0 : { *(.debug_typenames) }
+ .debug_varnames 0 : { *(.debug_varnames) }
+
+ ${STACK_ADDR+${STACK}}
+ ${OTHER_SECTIONS}
+ ${RELOCATING+${OTHER_END_SYMBOLS}}
+ ${RELOCATING+${STACKNOTE}}
+}
+EOF
diff --git a/ld/scripttempl/mmo.sc b/ld/scripttempl/mmo.sc
index 643b349539e3..599db83199dd 100644
--- a/ld/scripttempl/mmo.sc
+++ b/ld/scripttempl/mmo.sc
@@ -29,8 +29,9 @@ SECTIONS
${RELOCATING+ PROVIDE (__ctors_start = .);}
${RELOCATING+ PROVIDE (_ctors = .);}
${RELOCATING+ PROVIDE (__ctors = .);}
- ${RELOCATING+ KEEP (*crtbegin*.o(.ctors))}
- ${RELOCATING+ KEEP (*(EXCLUDE_FILE (*crtend*.o) .ctors))}
+ ${RELOCATING+ KEEP (*crtbegin.o(.ctors))}
+ ${RELOCATING+ KEEP (*crtbegin?.o(.ctors))}
+ ${RELOCATING+ KEEP (*(EXCLUDE_FILE (*crtend.o *crtend?.o) .ctors))}
${RELOCATING+ KEEP (*(SORT(.ctors.*)))}
${RELOCATING+ KEEP (*(.ctors))}
${RELOCATING+ PROVIDE (_ctors_end = .);}
@@ -40,8 +41,9 @@ SECTIONS
${RELOCATING+ PROVIDE (__dtors_start = .);}
${RELOCATING+ PROVIDE (_dtors = .);}
${RELOCATING+ PROVIDE (__dtors = .);}
- ${RELOCATING+ KEEP (*crtbegin*.o(.dtors))}
- ${RELOCATING+ KEEP (*(EXCLUDE_FILE (*crtend*.o) .dtors))}
+ ${RELOCATING+ KEEP (*crtbegin.o(.dtors))}
+ ${RELOCATING+ KEEP (*crtbegin?.o(.dtors))}
+ ${RELOCATING+ KEEP (*(EXCLUDE_FILE (*crtend.o *crtend?.o) .dtors))}
${RELOCATING+ KEEP (*(SORT(.dtors.*)))}
${RELOCATING+ KEEP (*(.dtors))}
${RELOCATING+ PROVIDE (_dtors_end = .);}
diff --git a/ld/scripttempl/pep.sc b/ld/scripttempl/pep.sc
new file mode 100644
index 000000000000..edad5ee8ecc8
--- /dev/null
+++ b/ld/scripttempl/pep.sc
@@ -0,0 +1,272 @@
+# Linker script for PE.
+
+if test -z "${RELOCATEABLE_OUTPUT_FORMAT}"; then
+ RELOCATEABLE_OUTPUT_FORMAT=${OUTPUT_FORMAT}
+fi
+
+# We can't easily and portably get an unquoted $ in a shell
+# substitution, so we do this instead.
+# Sorting of the .foo$* sections is required by the definition of
+# grouped sections in PE.
+# Sorting of the file names in R_IDATA is required by the
+# current implementation of dlltool (this could probably be changed to
+# use grouped sections instead).
+if test "${RELOCATING}"; then
+ R_TEXT='*(SORT(.text$*))'
+ R_DATA='*(SORT(.data$*))'
+ R_RDATA='*(SORT(.rdata$*))'
+ R_IDATA='
+ SORT(*)(.idata$2)
+ SORT(*)(.idata$3)
+ /* These zeroes mark the end of the import list. */
+ LONG (0); LONG (0); LONG (0); LONG (0); LONG (0);
+ SORT(*)(.idata$4)
+ SORT(*)(.idata$5)
+ SORT(*)(.idata$6)
+ SORT(*)(.idata$7)'
+ R_CRT_XC='*(SORT(.CRT$XC*)) /* C initialization */'
+ R_CRT_XI='*(SORT(.CRT$XI*)) /* C++ initialization */'
+ R_CRT_XL='*(SORT(.CRT$XL*)) /* TLS callbacks */'
+ R_CRT_XP='*(SORT(.CRT$XP*)) /* Pre-termination */'
+ R_CRT_XT='*(SORT(.CRT$XT*)) /* Termination */'
+ R_TLS='
+ *(.tls)
+ *(.tls$)
+ *(SORT(.tls$*))'
+ R_RSRC='*(SORT(.rsrc$*))'
+else
+ R_TEXT=
+ R_DATA=
+ R_RDATA=
+ R_IDATA=
+ R_CRT=
+ R_RSRC=
+fi
+
+cat <<EOF
+${RELOCATING+OUTPUT_FORMAT(${OUTPUT_FORMAT})}
+${RELOCATING-OUTPUT_FORMAT(${RELOCATEABLE_OUTPUT_FORMAT})}
+${OUTPUT_ARCH+OUTPUT_ARCH(${OUTPUT_ARCH})}
+
+${LIB_SEARCH_DIRS}
+
+SECTIONS
+{
+ ${RELOCATING+/* Make the virtual address and file offset synced if the alignment is}
+ ${RELOCATING+ lower than the target page size. */}
+ ${RELOCATING+. = SIZEOF_HEADERS;}
+ ${RELOCATING+. = ALIGN(__section_alignment__);}
+ .text ${RELOCATING+ __image_base__ + ( __section_alignment__ < ${TARGET_PAGE_SIZE} ? . : __section_alignment__ )} :
+ {
+ ${RELOCATING+ *(.init)}
+ *(.text)
+ ${R_TEXT}
+ *(.glue_7t)
+ *(.glue_7)
+ ${CONSTRUCTING+ ___CTOR_LIST__ = .; __CTOR_LIST__ = . ;
+ LONG (-1);*(.ctors); *(.ctor); *(SORT(.ctors.*)); LONG (0); }
+ ${CONSTRUCTING+ ___DTOR_LIST__ = .; __DTOR_LIST__ = . ;
+ LONG (-1); *(.dtors); *(.dtor); *(SORT(.dtors.*)); LONG (0); }
+ ${RELOCATING+ *(.fini)}
+ /* ??? Why is .gcc_exc here? */
+ ${RELOCATING+ *(.gcc_exc)}
+ ${RELOCATING+PROVIDE (etext = .);}
+ *(.gcc_except_table)
+ }
+
+ /* The Cygwin32 library uses a section to avoid copying certain data
+ on fork. This used to be named ".data$nocopy". The linker used
+ to include this between __data_start__ and __data_end__, but that
+ breaks building the cygwin32 dll. Instead, we name the section
+ ".data_cygwin_nocopy" and explictly include it after __data_end__. */
+
+ .data ${RELOCATING+BLOCK(__section_alignment__)} :
+ {
+ ${RELOCATING+__data_start__ = . ;}
+ *(.data)
+ *(.data2)
+ ${R_DATA}
+ *(.jcr)
+ ${RELOCATING+__data_end__ = . ;}
+ ${RELOCATING+*(.data_cygwin_nocopy)}
+ }
+
+ .rdata ${RELOCATING+BLOCK(__section_alignment__)} :
+ {
+ *(.rdata)
+ ${R_RDATA}
+ *(.eh_frame)
+ ${RELOCATING+___RUNTIME_PSEUDO_RELOC_LIST__ = .;}
+ ${RELOCATING+__RUNTIME_PSEUDO_RELOC_LIST__ = .;}
+ *(.rdata_runtime_pseudo_reloc)
+ ${RELOCATING+___RUNTIME_PSEUDO_RELOC_LIST_END__ = .;}
+ ${RELOCATING+__RUNTIME_PSEUDO_RELOC_LIST_END__ = .;}
+ }
+
+ .pdata ${RELOCATING+BLOCK(__section_alignment__)} :
+ {
+ *(.pdata)
+ }
+
+ .bss ${RELOCATING+BLOCK(__section_alignment__)} :
+ {
+ ${RELOCATING+__bss_start__ = . ;}
+ *(.bss)
+ *(COMMON)
+ ${RELOCATING+__bss_end__ = . ;}
+ }
+
+ .edata ${RELOCATING+BLOCK(__section_alignment__)} :
+ {
+ *(.edata)
+ }
+
+ /DISCARD/ :
+ {
+ *(.debug\$S)
+ *(.debug\$T)
+ *(.debug\$F)
+ *(.drectve)
+ }
+
+ .idata ${RELOCATING+BLOCK(__section_alignment__)} :
+ {
+ /* This cannot currently be handled with grouped sections.
+ See pep.em:sort_sections. */
+ ${R_IDATA}
+ }
+ .CRT ${RELOCATING+BLOCK(__section_alignment__)} :
+ {
+ ${RELOCATING+___crt_xc_start__ = . ;}
+ ${R_CRT_XC}
+ ${RELOCATING+___crt_xc_end__ = . ;}
+ ${RELOCATING+___crt_xi_start__ = . ;}
+ ${R_CRT_XI}
+ ${RELOCATING+___crt_xi_end__ = . ;}
+ ${RELOCATING+___crt_xl_start__ = . ;}
+ ${R_CRT_XL}
+ /* ___crt_xl_end__ is defined in the TLS Directory support code */
+ ${RELOCATING+___crt_xp_start__ = . ;}
+ ${R_CRT_XP}
+ ${RELOCATING+___crt_xp_end__ = . ;}
+ ${RELOCATING+___crt_xt_start__ = . ;}
+ ${R_CRT_XT}
+ ${RELOCATING+___crt_xt_end__ = . ;}
+ }
+
+ .tls ${RELOCATING+BLOCK(__section_alignment__)} :
+ {
+ ${RELOCATING+___tls_start__ = . ;}
+ ${R_TLS}
+ ${RELOCATING+___tls_end__ = . ;}
+ }
+
+ .endjunk ${RELOCATING+BLOCK(__section_alignment__)} :
+ {
+ /* end is deprecated, don't use it */
+ ${RELOCATING+PROVIDE (end = .);}
+ ${RELOCATING+PROVIDE ( _end = .);}
+ ${RELOCATING+ __end__ = .;}
+ }
+
+ .rsrc ${RELOCATING+BLOCK(__section_alignment__)} :
+ {
+ *(.rsrc)
+ ${R_RSRC}
+ }
+
+ .reloc ${RELOCATING+BLOCK(__section_alignment__)} :
+ {
+ *(.reloc)
+ }
+
+ .stab ${RELOCATING+BLOCK(__section_alignment__)} ${RELOCATING+(NOLOAD)} :
+ {
+ *(.stab)
+ }
+
+ .stabstr ${RELOCATING+BLOCK(__section_alignment__)} ${RELOCATING+(NOLOAD)} :
+ {
+ *(.stabstr)
+ }
+
+ /* DWARF debug sections.
+ Symbols in the DWARF debugging sections are relative to the beginning
+ of the section. Unlike other targets that fake this by putting the
+ section VMA at 0, the PE format will not allow it. */
+
+ /* DWARF 1.1 and DWARF 2. */
+ .debug_aranges ${RELOCATING+BLOCK(__section_alignment__)} ${RELOCATING+(NOLOAD)} :
+ {
+ *(.debug_aranges)
+ }
+
+ .debug_pubnames ${RELOCATING+BLOCK(__section_alignment__)} ${RELOCATING+(NOLOAD)} :
+ {
+ *(.debug_pubnames)
+ }
+
+ /* DWARF 2. */
+ .debug_info ${RELOCATING+BLOCK(__section_alignment__)} ${RELOCATING+(NOLOAD)} :
+ {
+ *(.debug_info) *(.gnu.linkonce.wi.*)
+ }
+
+ .debug_abbrev ${RELOCATING+BLOCK(__section_alignment__)} ${RELOCATING+(NOLOAD)} :
+ {
+ *(.debug_abbrev)
+ }
+
+ .debug_line ${RELOCATING+BLOCK(__section_alignment__)} ${RELOCATING+(NOLOAD)} :
+ {
+ *(.debug_line)
+ }
+
+ .debug_frame ${RELOCATING+BLOCK(__section_alignment__)} ${RELOCATING+(NOLOAD)} :
+ {
+ *(.debug_frame)
+ }
+
+ .debug_str ${RELOCATING+BLOCK(__section_alignment__)} ${RELOCATING+(NOLOAD)} :
+ {
+ *(.debug_str)
+ }
+
+ .debug_loc ${RELOCATING+BLOCK(__section_alignment__)} ${RELOCATING+(NOLOAD)} :
+ {
+ *(.debug_loc)
+ }
+
+ .debug_macinfo ${RELOCATING+BLOCK(__section_alignment__)} ${RELOCATING+(NOLOAD)} :
+ {
+ *(.debug_macinfo)
+ }
+
+ /* SGI/MIPS DWARF 2 extensions. */
+ .debug_weaknames ${RELOCATING+BLOCK(__section_alignment__)} ${RELOCATING+(NOLOAD)} :
+ {
+ *(.debug_weaknames)
+ }
+
+ .debug_funcnames ${RELOCATING+BLOCK(__section_alignment__)} ${RELOCATING+(NOLOAD)} :
+ {
+ *(.debug_funcnames)
+ }
+
+ .debug_typenames ${RELOCATING+BLOCK(__section_alignment__)} ${RELOCATING+(NOLOAD)} :
+ {
+ *(.debug_typenames)
+ }
+
+ .debug_varnames ${RELOCATING+BLOCK(__section_alignment__)} ${RELOCATING+(NOLOAD)} :
+ {
+ *(.debug_varnames)
+ }
+
+ /* DWARF 3. */
+ .debug_ranges ${RELOCATING+BLOCK(__section_alignment__)} ${RELOCATING+(NOLOAD)} :
+ {
+ *(.debug_ranges)
+ }
+}
+EOF
diff --git a/ld/scripttempl/xstormy16.sc b/ld/scripttempl/xstormy16.sc
index dd7c52cb9d4c..9008f5ce8e06 100644
--- a/ld/scripttempl/xstormy16.sc
+++ b/ld/scripttempl/xstormy16.sc
@@ -67,14 +67,15 @@ CTOR=".ctors ${CONSTRUCTING-0} :
doesn't matter which directory crtbegin.o
is in. */
- KEEP (*crtbegin*.o(.ctors))
+ KEEP (*crtbegin.o(.ctors))
+ KEEP (*crtbegin?.o(.ctors))
/* We don't want to include the .ctor section from
the crtend.o file until after the sorted ctors.
The .ctor section from the crtend file contains the
end of ctors marker and it must be last */
- KEEP (*(EXCLUDE_FILE (*crtend*.o $OTHER_EXCLUDE_FILES) .ctors))
+ KEEP (*(EXCLUDE_FILE (*crtend.o *crtend?.o $OTHER_EXCLUDE_FILES) .ctors))
KEEP (*(SORT(.ctors.*)))
KEEP (*(.ctors))
${CONSTRUCTING+${CTOR_END}}
@@ -83,8 +84,9 @@ CTOR=".ctors ${CONSTRUCTING-0} :
DTOR=" .dtors ${CONSTRUCTING-0} :
{
${CONSTRUCTING+${DTOR_START}}
- KEEP (*crtbegin*.o(.dtors))
- KEEP (*(EXCLUDE_FILE (*crtend*.o $OTHER_EXCLUDE_FILES) .dtors))
+ KEEP (*crtbegin.o(.dtors))
+ KEEP (*crtbegin?.o(.dtors))
+ KEEP (*(EXCLUDE_FILE (*crtend.o *crtend?.o $OTHER_EXCLUDE_FILES) .dtors))
KEEP (*(SORT(.dtors.*)))
KEEP (*(.dtors))
${CONSTRUCTING+${DTOR_END}}
generated by cgit v1.2.3 (git 2.25.1) at 2024-05-25 15:23:30 +0000