diff options
Diffstat (limited to 'ntpdc/ntpdc-opts.texi')
-rw-r--r-- | ntpdc/ntpdc-opts.texi | 199 |
1 files changed, 95 insertions, 104 deletions
diff --git a/ntpdc/ntpdc-opts.texi b/ntpdc/ntpdc-opts.texi index 121c270df17d..b868c5e659d2 100644 --- a/ntpdc/ntpdc-opts.texi +++ b/ntpdc/ntpdc-opts.texi @@ -6,7 +6,7 @@ # # EDIT THIS FILE WITH CAUTION (ntpdc-opts.texi) # -# It has been AutoGen-ed Tuesday December 8, 2009 at 08:14:02 AM EST +# It has been AutoGen-ed December 24, 2011 at 06:34:25 PM by AutoGen 5.12 # From the definitions ntpdc-opts.def # and the template file aginfo.tpl @end ignore @@ -32,22 +32,22 @@ ntpd's configuration file may also be specified at run time using This section was generated by @strong{AutoGen}, -the aginfo template and the option descriptions for the @command{ntpdc} program. It documents the ntpdc usage text and option meanings. +the aginfo template and the option descriptions for the @command{ntpdc} program. It documents the @command{ntpdc} usage text and option meanings. This software is released under a specialized copyright license. @menu * ntpdc usage:: ntpdc usage help (-?) -* ntpdc command:: command option (-c) -* ntpdc debug-level:: debug-level option (-d) -* ntpdc interactive:: interactive option (-i) -* ntpdc ipv4:: ipv4 option (-4) -* ntpdc ipv6:: ipv6 option (-6) -* ntpdc listpeers:: listpeers option (-l) -* ntpdc numeric:: numeric option (-n) -* ntpdc peers:: peers option (-p) -* ntpdc set-debug-level:: set-debug-level option (-D) -* ntpdc showpeers:: showpeers option (-s) +* ntpdc command:: command option (-c) +* ntpdc debug-level:: debug-level option (-d) +* ntpdc interactive:: interactive option (-i) +* ntpdc ipv4:: ipv4 option (-4) +* ntpdc ipv6:: ipv6 option (-6) +* ntpdc listpeers:: listpeers option (-l) +* ntpdc numeric:: numeric option (-n) +* ntpdc peers:: peers option (-p) +* ntpdc set-debug-level:: set-debug-level option (-D) +* ntpdc showpeers:: showpeers option (-s) @end menu @node ntpdc usage @@ -58,7 +58,7 @@ This is the automatically generated usage text for ntpdc: @exampleindent 0 @example -ntpdc - vendor-specific NTP query program - Ver. 4.2.5p247-RC +ntpdc - vendor-specific NTP query program - Ver. 4.2.6p5 USAGE: ntpdc [ -<flag> [<val>] | --<name>[@{=| @}<val>] ]... [ host ...] Flg Arg Option-Name Description -4 no ipv4 Force IPv4 DNS name resolution @@ -97,118 +97,111 @@ USAGE: ntpdc [ -<flag> [<val>] | --<name>[@{=| @}<val>] ]... [ host ...] - disabled as --no-load-opts - may appear multiple times -Options are specified by doubled hyphens and their name -or by a single hyphen and the flag character. +Options are specified by doubled hyphens and their name or by a single +hyphen and the flag character. The following option preset mechanisms are supported: - - reading file /users/stenn/.ntprc - - reading file /deacon/backroom/snaps/ntp-stable/ntpdc/.ntprc + - reading file $HOME/.ntprc + - reading file ./.ntprc - examining environment variables named NTPDC_* -The -[= prog-name =] -utility program is used to query an NTP daemon about its -current state and to request changes in that state. -It uses NTP mode 7 control message formats described in the source code. -The program may +The [= prog-name =] utility program is used to query an NTP daemon about +its current state and to request changes in that state. It uses NTP mode +7 control message formats described in the source code. The program may be run either in interactive mode or controlled using command line -arguments. -Extensive state and statistics information is available -through the -[= prog-name =] -interface. -In addition, nearly all the -configuration options which can be specified at startup using -ntpd's configuration file may also be specified at run time using -[= prog-name =] . +arguments. Extensive state and statistics information is available +through the [= prog-name =] interface. In addition, nearly all the +configuration options which can be specified at startup using ntpd's +configuration file may also be specified at run time using [= prog-name =] +. please send bug reports to: http://bugs.ntp.org, bugs@@ntp.org @end example @exampleindent 4 -@node ntpdc ipv4 -@subsection ipv4 option (-4) -@cindex ntpdc-ipv4 +@node ntpdc command +@subsection command option (-c) +@cindex ntpdc-command -This is the ``force ipv4 dns name resolution'' option. +This is the ``run a command and exit'' option. This option has some usage constraints. It: @itemize @bullet @item -is a member of the ipv4 class of options. +may appear an unlimited number of times. @end itemize -Force DNS resolution of following host names on the command line -to the IPv4 namespace. +The following argument is interpreted as an interactive format command +and is added to the list of commands to be executed on the specified +host(s). -@node ntpdc ipv6 -@subsection ipv6 option (-6) -@cindex ntpdc-ipv6 +@node ntpdc debug-level +@subsection debug-level option (-d) +@cindex ntpdc-debug-level -This is the ``force ipv6 dns name resolution'' option. +This is the ``increase output debug message level'' option. This option has some usage constraints. It: @itemize @bullet @item -is a member of the ipv4 class of options. +may appear an unlimited number of times. @end itemize -Force DNS resolution of following host names on the command line -to the IPv6 namespace. +Increase the debugging message output level. -@node ntpdc command -@subsection command option (-c) -@cindex ntpdc-command +@node ntpdc interactive +@subsection interactive option (-i) +@cindex ntpdc-interactive -This is the ``run a command and exit'' option. +This is the ``force ntpq to operate in interactive mode'' option. This option has some usage constraints. It: @itemize @bullet @item -may appear an unlimited number of times. +must not appear in combination with any of the following options: +command, listpeers, peers, showpeers. @end itemize -The following argument is interpreted as an interactive format command -and is added to the list of commands to be executed on the specified -host(s). +Force ntpq to operate in interactive mode. Prompts will be written +to the standard output and commands read from the standard input. -@node ntpdc listpeers -@subsection listpeers option (-l) -@cindex ntpdc-listpeers +@node ntpdc ipv4 +@subsection ipv4 option (-4) +@cindex ntpdc-ipv4 -This is the ``print a list of the peers'' option. +This is the ``force ipv4 dns name resolution'' option. This option has some usage constraints. It: @itemize @bullet @item must not appear in combination with any of the following options: -command. +ipv6. @end itemize -Print a list of the peers known to the server as well as a summary of -their state. This is equivalent to the 'listpeers' interactive command. +Force DNS resolution of following host names on the command line +to the IPv4 namespace. -@node ntpdc peers -@subsection peers option (-p) -@cindex ntpdc-peers +@node ntpdc ipv6 +@subsection ipv6 option (-6) +@cindex ntpdc-ipv6 -This is the ``print a list of the peers'' option. +This is the ``force ipv6 dns name resolution'' option. This option has some usage constraints. It: @itemize @bullet @item must not appear in combination with any of the following options: -command. +ipv4. @end itemize -Print a list of the peers known to the server as well as a summary -of their state. This is equivalent to the 'peers' interactive command. +Force DNS resolution of following host names on the command line +to the IPv6 namespace. -@node ntpdc showpeers -@subsection showpeers option (-s) -@cindex ntpdc-showpeers +@node ntpdc listpeers +@subsection listpeers option (-l) +@cindex ntpdc-listpeers -This is the ``show a list of the peers'' option. +This is the ``print a list of the peers'' option. This option has some usage constraints. It: @itemize @bullet @@ -217,40 +210,32 @@ must not appear in combination with any of the following options: command. @end itemize -Print a list of the peers known to the server as well as a summary -of their state. This is equivalent to the 'dmpeers' interactive command. - -@node ntpdc interactive -@subsection interactive option (-i) -@cindex ntpdc-interactive - -This is the ``force ntpq to operate in interactive mode'' option. +Print a list of the peers known to the server as well as a summary of +their state. This is equivalent to the 'listpeers' interactive command. -This option has some usage constraints. It: -@itemize @bullet -@item -must not appear in combination with any of the following options: -command, listpeers, peers, showpeers. -@end itemize +@node ntpdc numeric +@subsection numeric option (-n) +@cindex ntpdc-numeric -Force ntpq to operate in interactive mode. Prompts will be written -to the standard output and commands read from the standard input. +This is the ``numeric host addresses'' option. +Output all host addresses in dotted-quad numeric format rather than +converting to the canonical host names. -@node ntpdc debug-level -@subsection debug-level option (-d) -@cindex ntpdc-debug-level +@node ntpdc peers +@subsection peers option (-p) +@cindex ntpdc-peers -This is the ``increase output debug message level'' option. +This is the ``print a list of the peers'' option. This option has some usage constraints. It: @itemize @bullet @item -may appear an unlimited number of times. -@item -must be compiled in by defining @code{DEBUG} during the compilation. +must not appear in combination with any of the following options: +command. @end itemize -Increase the debugging message output level. +Print a list of the peers known to the server as well as a summary +of their state. This is equivalent to the 'peers' interactive command. @node ntpdc set-debug-level @subsection set-debug-level option (-D) @@ -262,17 +247,23 @@ This option has some usage constraints. It: @itemize @bullet @item may appear an unlimited number of times. -@item -must be compiled in by defining @code{DEBUG} during the compilation. @end itemize Set the output debugging level. Can be supplied multiple times, but each overrides the previous value(s). -@node ntpdc numeric -@subsection numeric option (-n) -@cindex ntpdc-numeric +@node ntpdc showpeers +@subsection showpeers option (-s) +@cindex ntpdc-showpeers -This is the ``numeric host addresses'' option. -Output all host addresses in dotted-quad numeric format rather than -converting to the canonical host names. +This is the ``show a list of the peers'' option. + +This option has some usage constraints. It: +@itemize @bullet +@item +must not appear in combination with any of the following options: +command. +@end itemize + +Print a list of the peers known to the server as well as a summary +of their state. This is equivalent to the 'dmpeers' interactive command. |