1 files changed, 0 insertions, 127 deletions
diff --git a/release/picobsd/isp/floppy.tree/etc/rc.serial b/release/picobsd/isp/floppy.tree/etc/rc.serial
deleted file mode 100644
index 840377b7c3d1..000000000000
--- a/release/picobsd/isp/floppy.tree/etc/rc.serial
+++ /dev/null
@@ -1,127 +0,0 @@
-#!/bin/sh
-# $Id: rc.serial,v 1.1.1.1 1998/07/14 07:30:45 abial Exp $
-
-# Change some defaults for serial devices.
-# Standard defaults are:
-#	dtrwait 300 drainwait 0
-#	initial cflag from <sys/ttydefaults.h> = cread cs8 hupcl
-#	initial iflag, lflag and oflag all 0
-#	speed 9600
-#	special chars from <sys/ttydefaults.h>
-#	nothing locked
-# except for serial consoles the initial iflag, lflag and oflag are from
-# <sys/ttydefaults.h> and clocal is locked on.
-
-default() {
-	# Reset everything changed by the other functions to initial defaults.
-
-	ci=$1; shift	# call in device identifier
-	co=$1; shift	# call out device identifier
-
-	for i in $*
-	do
-		comcontrol /dev/tty$ci$i dtrwait 300 drainwait 0
-		stty </dev/ttyi$ci$i -clocal  crtscts  hupcl 9600 reprint ^R
-		stty </dev/ttyl$ci$i -clocal -crtscts -hupcl 0
-		stty </dev/cuai$co$i -clocal  crtscts  hupcl 9600 reprint ^R
-		stty </dev/cual$co$i -clocal -crtscts -hupcl 0
-	done
-}
-
-maybe() {
-	# Special settings.
-
-	ci=$1; shift
-	co=$1; shift
-
-	for i in $*
-	do
-		# Don't use ^R; it breaks bash's ^R when typed ahead.
-		stty </dev/ttyi$ci$i reprint undef
-		stty </dev/cuai$co$i reprint undef
-		# Lock clocal off on dialin device for security.
-		stty </dev/ttyl$ci$i clocal
-		# Lock the speeds to use old binaries that don't support them.
-		# Any legal speed works to lock the initial speed.
-		stty </dev/ttyl$ci$i 300
-		stty </dev/cual$co$i 300
-	done
-}
-
-modem() {
-	# Modem that supports CTS and perhaps RTS handshaking.
-
-	ci=$1; shift
-	co=$1; shift
-
-	for i in $*
-	do
-		# may depend on modem
-		comcontrol /dev/tty$ci$i dtrwait 100 drainwait 180
-		# Lock crtscts on.
-		# Speed reasonable for V42bis.
-		stty </dev/ttyi$ci$i crtscts 57600
-		stty </dev/ttyl$ci$i crtscts
-		stty </dev/cuai$co$i crtscts 57600
-		stty </dev/cual$co$i crtscts
-	done
-}
-
-mouse() {
-	# Mouse on either callin or callout port.
-
-	ci=$1; shift
-	co=$1; shift
-
-	for i in $*
-	do
-		# Lock clocal on, hupcl off.
-		# Standard speed for Microsoft mouse.
-		stty </dev/ttyi$ci$i clocal -hupcl 1200
-		stty </dev/ttyl$ci$i clocal  hupcl
-		stty </dev/cuai$co$i clocal -hupcl 1200
-		stty </dev/cual$co$i clocal  hupcl
-	done
-}
-
-terminal() {
-	# Terminal that supports CTS and perhaps RTS handshaking
-	# with the cable or terminal arranged so that DCD is on
-	# at least while the terminal is on.
-	# Also works for bidirectional communications to another pc
-	# provided at most one side runs getty.
-	# Same as modem() except we want a faster speed and no dtrwait.
-
-	ci=$1; shift
-	co=$1; shift
-
-	modem $ci $co $*
-	for i in $*
-	do
-		comcontrol /dev/tty$ci$i dtrwait 0
-		stty </dev/ttyi$ci$i 115200
-		stty </dev/cuai$co$i 115200
-	done
-}
-
-# Don't use anything from this file unless you have some buggy programs
-# that require it.
-
-# Edit the functions and the examples to suit your system.
-# $1 is the call in device identifier, $2 is the call out device identifier
-# and the remainder of the line lists the device numbers.
-
-# Initialize assorted 8250-16550 (sio) ports.
-# maybe    d a  0 1 2 3 4 5 6 7 8 9 a b c d e f g h i j k l m n o p q r s t u v
-# mouse    d a      2
-# modem    d a    1
-# terminal d a  0
-
-# Initialize all ports on a Cyclades-8yo.
-# modem    c c  00 01 02 03 04 05 06 07
-
-# Initialize all ports on a Cyclades-16ye.
-# modem    c c  00 01 02 03 04 05 06 07 08 09 0a 0b 0c 0d 0e 0f 
-
-# Initialize all ports on a Digiboard 8.
-# modem    D D  00 01 02 03 04 05 06 07