diff options
Diffstat (limited to 'share/man/man4/amr.4')
-rw-r--r-- | share/man/man4/amr.4 | 246 |
1 files changed, 0 insertions, 246 deletions
diff --git a/share/man/man4/amr.4 b/share/man/man4/amr.4 deleted file mode 100644 index 8ef14dfd1d9b..000000000000 --- a/share/man/man4/amr.4 +++ /dev/null @@ -1,246 +0,0 @@ -.\" -.\" Copyright (c) 2000 Jeroen Ruigrok van der Werven -.\" All rights reserved. -.\" -.\" Redistribution and use in source and binary forms, with or without -.\" modification, are permitted provided that the following conditions -.\" are met: -.\" 1. Redistributions of source code must retain the above copyright -.\" notice, this list of conditions and the following disclaimer. -.\" 2. The name of the author may not be used to endorse or promote products -.\" derived from this software without specific prior written permission -.\" -.\" THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS IS'' AND ANY EXPRESS OR -.\" IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES -.\" OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. -.\" IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT, -.\" INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT -.\" NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, -.\" DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY -.\" THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT -.\" (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF -.\" THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. -.\" -.\" $FreeBSD$ -.\" -.Dd March 29, 2006 -.Dt AMR 4 -.Os -.Sh NAME -.Nm amr -.Nd MegaRAID SCSI/ATA/SATA RAID driver -.Sh SYNOPSIS -To compile this driver into the kernel, -place the following lines in your -kernel configuration file: -.Bd -ragged -offset indent -.Cd "device pci" -.Cd "device scbus" -.Cd "device amr" -.Ed -.Pp -Alternatively, to load the driver as a -module at boot time, place the following line in -.Xr loader.conf 5 : -.Bd -literal -offset indent -amr_load="YES" -.Ed -.Sh DEPRECATION NOTICE -The -.Nm -driver is not present in -.Fx 13.0 . -.Sh DESCRIPTION -The -.Nm -driver provides support for LSI Logic MegaRAID SCSI, ATA and SATA -RAID controllers and legacy American Megatrends MegaRAID -SCSI RAID controllers, including models relabeled -and sold by Dell and Hewlett-Packard. -.Pp -LSI MegaRAID SAS controllers are supported by -.Xr mfi 4 -and will not work with this driver. -.Sh HARDWARE -Controllers supported by the -.Nm -driver include: -.Pp -.Bl -bullet -compact -.It -MegaRAID SATA 150-4 -.It -MegaRAID SATA 150-6 -.It -MegaRAID SATA 300-4X -.It -MegaRAID SATA 300-8X -.It -MegaRAID SCSI 320-1E -.It -MegaRAID SCSI 320-2E -.It -MegaRAID SCSI 320-4E -.It -MegaRAID SCSI 320-0X -.It -MegaRAID SCSI 320-2X -.It -MegaRAID SCSI 320-4X -.It -MegaRAID SCSI 320-0 -.It -MegaRAID SCSI 320-1 -.It -MegaRAID SCSI 320-2 -.It -MegaRAID SCSI 320-4 -.It -MegaRAID Series 418 -.It -MegaRAID i4 133 RAID -.It -MegaRAID Elite 1500 (Series 467) -.It -MegaRAID Elite 1600 (Series 493) -.It -MegaRAID Elite 1650 (Series 4xx) -.It -MegaRAID Enterprise 1200 (Series 428) -.It -MegaRAID Enterprise 1300 (Series 434) -.It -MegaRAID Enterprise 1400 (Series 438) -.It -MegaRAID Enterprise 1500 (Series 467) -.It -MegaRAID Enterprise 1600 (Series 471) -.It -MegaRAID Express 100 (Series 466WS) -.It -MegaRAID Express 200 (Series 466) -.It -MegaRAID Express 300 (Series 490) -.It -MegaRAID Express 500 (Series 475) -.It -Dell PERC -.It -Dell PERC 2/SC -.It -Dell PERC 2/DC -.It -Dell PERC 3/DCL -.It -Dell PERC 3/QC -.It -Dell PERC 4/DC -.It -Dell PERC 4/IM -.It -Dell PERC 4/SC -.It -Dell PERC 4/Di -.It -Dell PERC 4e/DC -.It -Dell PERC 4e/Di -.It -Dell PERC 4e/Si -.It -Dell PERC 4ei -.It -HP NetRAID-1/Si -.It -HP NetRAID-3/Si (D4943A) -.It -HP Embedded NetRAID -.It -Intel RAID Controller SRCS16 -.It -Intel RAID Controller SRCU42X -.El -.Sh DIAGNOSTICS -.Ss Driver initialisation/shutdown phase -.Bl -diag -.It amr%d: memory window not available -.It amr%d: I/O window not available -.Pp -The PCI BIOS did not allocate resources necessary for the correct operation of -the controller. -The driver cannot attach to this controller. -.It amr%d: busmaster bit not set, enabling -.Pp -The PCI BIOS did not enable busmaster DMA, -which is required for the correct operation of the controller. -The driver has enabled this bit and initialisation will proceed. -.It amr%d: can't allocate register window -.It amr%d: can't allocate interrupt -.It amr%d: can't set up interrupt -.It amr%d: can't allocate parent DMA tag -.It amr%d: can't allocate buffer DMA tag -.It amr%d: can't allocate scatter/gather DMA tag -.It amr%d: can't allocate s/g table -.It amr%d: can't allocate mailbox tag -.It amr%d: can't allocate mailbox memory -.Pp -A resource allocation error occurred while initialising the driver; -initialisation has failed and the driver will not attach to this controller. -.It amr%d: can't obtain configuration data from controller -.It amr%d: can't obtain product data from controller -.Pp -The driver was unable to obtain vital configuration data from the controller. -Initialisation has failed and the driver will not attach to this controller. -.It amr%d: can't establish configuration hook -.It amr%d: can't scan controller for drives -.Pp -The scan for logical drives managed by the controller failed. -No drives will be attached. -.It amr%d: device_add_child failed -.It amr%d: bus_generic_attach returned %d -.Pp -Creation of the logical drive instances failed; -attachment of one or more logical drives may have been aborted. -.It amr%d: flushing cache... -.Pp -The controller cache is being flushed prior to shutdown or detach. -.El -.Ss Operational diagnostics -.Bl -diag -.It amr%d: I/O beyond end of unit (%u,%d > %u) -.Pp -A partitioning error or disk corruption has caused an I/O request -beyond the end of the logical drive. -This may also occur if FlexRAID Virtual Sizing is enabled and -an I/O operation is attempted on a portion of the virtual drive -beyond the actual capacity available. -.It amr%d: polled command timeout -.Pp -An initialisation command timed out. -The initialisation process may fail as a result. -.It amr%d: bad slot %d completed -.Pp -The controller reported completion of a command that the driver did not issue. -This may result in data corruption, -and suggests a hardware or firmware problem with the system or controller. -.It amr%d: I/O error - %x -.Pp -An I/O error has occurred. -.El -.Sh SEE ALSO -.Xr cd 4 , -.Xr da 4 , -.Xr mfi 4 , -.Xr sa 4 , -.Xr scsi 4 -.Sh AUTHORS -.An -nosplit -The -.Nm -driver was written by -.An Mike Smith Aq Mt msmith@FreeBSD.org . -.Pp -This manual page was written by -.An Mike Smith Aq Mt msmith@FreeBSD.org -and -.An Jeroen Ruigrok van der Werven Aq Mt asmodai@FreeBSD.org . |