diff options
Diffstat (limited to 'share/man/man4/fpa.4')
-rw-r--r-- | share/man/man4/fpa.4 | 58 |
1 files changed, 58 insertions, 0 deletions
diff --git a/share/man/man4/fpa.4 b/share/man/man4/fpa.4 new file mode 100644 index 000000000000..097442998e8c --- /dev/null +++ b/share/man/man4/fpa.4 @@ -0,0 +1,58 @@ +.\" +.\" Copyright (c) 1995, Matt Thomas +.\" All rights reserved. +.\" +.\" $FreeBSD$ +.\" +.Dd March 13, 1995 +.Dt FPA 4 +.Os +.Sh NAME +.Nm fpa , +.Nm fea +.Nd device drivers for DEC FDDI controllers +.Sh SYNOPSIS +.Cd "device fpa" +.Cd "device fea" +.Pp +.Fx +only: +.Cd "device fddi" +.Sh DESCRIPTION +The +.Nm +and +.Nm fea +device drivers provide support for the DEC DEFPA PCI FDDI Controller and +the DEC DEFEA EISA FDDI Controller, respectively. +All variants of either +controller are supported including the DAS and SAS configurations. +.Sh DIAGNOSTICS +.Bl -diag +.It "fea%d: error: desired IRQ of %d does not match device's actual IRQ (%d)" +The device probe detected that the DEFEA board is configured for a different +interrupt than the one specified in the kernel configuration file. +.It "fea%d: error: memory not enabled! ECU reconfiguration required" +The device probe found that no device memory had been configured on the +DEFEA. +Although the DEFEA can be configured with no device memory, this driver +requires a minimum of 1K device memory to be set up. +The ECU (EISA Configuration +Utility) will need to be run to change the settings. +.El +.Sh SEE ALSO +.Xr arp 4 , +.Xr netintro 4 , +.Xr ifconfig 8 +.Sh AUTHORS +The +.Nm +and +.Nm fea +device drivers and this manual page were written by +.An Matt Thomas . +.Sh CAVEATS +Normally, the device driver will not enable the reception of SMT frames. +However if the IFF_LINK1 flag is set, the device driver will enable the +reception of SMT frames and pass them up to the Berkeley Packet Filter for +processing. |