aboutsummaryrefslogtreecommitdiff
path: root/share/mk
diff options
context:
space:
mode:
Diffstat (limited to 'share/mk')
-rw-r--r--share/mk/dirdeps.mk240
-rw-r--r--share/mk/gendirdeps.mk26
-rwxr-xr-xshare/mk/meta2deps.py18
3 files changed, 181 insertions, 103 deletions
diff --git a/share/mk/dirdeps.mk b/share/mk/dirdeps.mk
index 9f051e9203e7..316fe022f2f9 100644
--- a/share/mk/dirdeps.mk
+++ b/share/mk/dirdeps.mk
@@ -1,6 +1,7 @@
-# $Id: dirdeps.mk,v 1.23 2012/11/06 05:44:03 sjg Exp $
+# $Id: dirdeps.mk,v 1.24 2013/02/10 19:21:46 sjg Exp $
-# Copyright (c) 2010-2012, Juniper Networks, Inc.
+# Copyright (c) 2010-2013, Juniper Networks, Inc.
+# All rights reserved.
#
# Redistribution and use in source and binary forms, with or without
# modification, are permitted provided that the following conditions
@@ -33,21 +34,31 @@
# This is what we do with DIRDEPS
# DIRDEPS:
-# This is a list of directories - relative to SRCTOP, it is only
-# of interest to .MAKE.LEVEL 0.
+# This is a list of directories - relative to SRCTOP, it is
+# normally only of interest to .MAKE.LEVEL 0.
# In some cases the entry may be qualified with a .<machine>
-# suffix, for example to force building something for the pseudo
+# or .<target_spec> suffix (see TARGET_SPEC_VARS below),
+# for example to force building something for the pseudo
# machines "host" or "common" regardless of current ${MACHINE}.
-# All unqualified entries end up being qualified with .${MACHINE}
-# and _DIRDEPS_USE below, uses the suffix to set MACHINE
+#
+# All unqualified entries end up being qualified with .${TARGET_SPEC}
+# and partially qualified (if TARGET_SPEC_VARS has multiple
+# entries) are also expanded to a full .<target_spec>.
+# The _DIRDEPS_USE target uses the suffix to set TARGET_SPEC
# correctly when visiting each entry.
#
-# Each entry is also converted into a set of paths to look for
-# Makefile.depend.<machine> to learn the dependencies of each.
-# Each Makefile.depend.<machine> sets DEP_RELDIR to be the
+# The fully qualified directory entries are used to construct a
+# dependency graph that will drive the build later.
+#
+# Also, for each fully qualified directory target, we will search
+# using ${.MAKE.DEPENDFILE_PREFERENCE} to find additional
+# dependencies. We use Makefile.depend (default value for
+# .MAKE.DEPENDFILE_PREFIX) to refer to these makefiles to
+# distinguish them from others.
+#
+# Each Makefile.depend file sets DEP_RELDIR to be the
# the RELDIR (path relative to SRCTOP) for its directory, and
-# DEP_MACHINE to its suffix (<machine>), further since
-# each Makefile.depend.<machine> includes dirdeps.mk, this
+# since each Makefile.depend file includes dirdeps.mk, this
# processing is recursive and results in .MAKE.LEVEL 0 learning the
# dependencies of the tree wrt the initial directory (_DEP_RELDIR).
#
@@ -55,22 +66,23 @@
# Indicates whether .MAKE.LEVEL 0 builds anything:
# if "no" sub-makes are used to build everything,
# if "yes" sub-makes are only used to build for other machines.
+# It is best to use "no", but this can require fixing some
+# makefiles to not do anything at .MAKE.LEVEL 0.
#
# TARGET_SPEC_VARS
-# All the description above (and below) assumes <machine> is the
-# only data needed to control the build.
-# This is not always the case. So in addition to setting
-# MACHINE in the build environment we set TARGET_SPEC which is
-# composed of the values of TARGET_SPEC_VARS separated by
-# commas. The default is just MACHINE.
+# The default value is just MACHINE, and for most environments
+# this is sufficient. The _DIRDEPS_USE target actually sets
+# both MACHINE and TARGET_SPEC to the suffix of the current
+# target so that in the general case TARGET_SPEC can be ignored.
#
-# If more that MACHINE is needed then sys.mk needs to decompose
+# If more than MACHINE is needed then sys.mk needs to decompose
# TARGET_SPEC and set the relevant variables accordingly.
-# It is important that MACHINE be included in TARGET_SPEC_VARS
-# since if there is more the value passed as MACHINE will infact
-# be the TARGET_SPEC.
+# It is important that MACHINE be included in and actually be
+# the first member of TARGET_SPEC_VARS. This allows other
+# variables to be considered optional, and some of the treatment
+# below relies on MACHINE being the first entry.
# Note: TARGET_SPEC cannot contain any '.'s so the target
-# tripple used by compiler folk won't work (directly anyway).
+# triple used by compiler folk won't work (directly anyway).
#
# For example:
#
@@ -100,14 +112,48 @@
# do some setup we only need once
_CURDIR ?= ${.CURDIR}
+# make sure these are empty to start with
+_DEP_TARGET_SPEC =
+_DIRDEP_CHECKED =
+
# If TARGET_SPEC_VARS is other than just MACHINE
# it should be set by sys.mk or similar by now.
# TARGET_SPEC must not contain any '.'s.
TARGET_SPEC_VARS ?= MACHINE
+# this is what we started with
TARGET_SPEC = ${TARGET_SPEC_VARS:@v@${$v:U}@:ts,}
+# this is what we mostly use below
+DEP_TARGET_SPEC = ${TARGET_SPEC_VARS:S,^,DEP_,:@v@${$v:U}@:ts,}
+# make sure we have defaults
+.for v in ${TARGET_SPEC_VARS}
+DEP_$v ?= ${$v}
+.endfor
+
+.if ${TARGET_SPEC_VARS:[#]} > 1
+# Ok, this gets more complex (putting it mildly).
+# In order to stay sane, we need to ensure that all the build_dirs
+# we compute below are fully qualified wrt DEP_TARGET_SPEC.
+# The makefiles may only partially specify (eg. MACHINE only),
+# so we need to construct a set of modifiers to fill in the gaps.
+# jot 10 should output 1 2 3 .. 10
+JOT ?= jot
+_tspec_x := ${${JOT} ${TARGET_SPEC_VARS:[#]}:L:sh}
+# this handles unqualified entries
+M_dep_qual_fixes = C;(/[^/.,]+)$$;\1.${DEP_TARGET_SPEC};
+# there needs to be at least one item missing for these to make sense
+.for i in ${_tspec_x:[2..-1]}
+_tspec_m$i := ${TARGET_SPEC_VARS:[2..$i]:@w@[^,]+@:ts,}
+_tspec_a$i := ,${TARGET_SPEC_VARS:[$i..-1]:@v@$${DEP_$v}@:ts,}
+M_dep_qual_fixes += C;(\.${_tspec_m$i})$$;\1${_tspec_a$i};
+.endfor
+.else
+# A harmless? default.
+M_dep_qual_fixes = U
+.endif
.if !defined(.MAKE.DEPENDFILE_PREFERENCE)
-# this makes the logic below neater?
+# .MAKE.DEPENDFILE_PREFERENCE makes the logic below neater?
+# you really want this set by sys.mk or similar
.MAKE.DEPENDFILE_PREFERENCE = ${_CURDIR}/${.MAKE.DEPENDFILE:T}
.if ${.MAKE.DEPENDFILE:E} == "${TARGET_SPEC}"
.if ${TARGET_SPEC} != ${MACHINE}
@@ -118,12 +164,12 @@ TARGET_SPEC = ${TARGET_SPEC_VARS:@v@${$v:U}@:ts,}
.endif
_default_dependfile := ${.MAKE.DEPENDFILE_PREFERENCE:[1]:T}
-_machine_dependfiles := ${.MAKE.DEPENDFILE_PREFERENCE:M*.${TARGET_SPEC}} \
- ${.MAKE.DEPENDFILE_PREFERENCE:M*.${MACHINE}}
+_machine_dependfiles := ${.MAKE.DEPENDFILE_PREFERENCE:T:M*${MACHINE}*}
# for machine specific dependfiles we require ${MACHINE} to be at the end
# also for the sake of sanity we require a common prefix
.if !defined(.MAKE.DEPENDFILE_PREFIX)
+# knowing .MAKE.DEPENDFILE_PREFIX helps
.if !empty(_machine_dependfiles)
.MAKE.DEPENDFILE_PREFIX := ${_machine_dependfiles:[1]:T:R}
.else
@@ -133,24 +179,45 @@ _machine_dependfiles := ${.MAKE.DEPENDFILE_PREFERENCE:M*.${TARGET_SPEC}} \
# this is how we identify non-machine specific dependfiles
-N_notmachine := ${.MAKE.DEPENDFILE_PREFERENCE:E:N${TARGET_SPEC}:N${MACHINE}:${M_ListToSkip}}
+N_notmachine := ${.MAKE.DEPENDFILE_PREFERENCE:E:N*${MACHINE}*:${M_ListToSkip}}
.endif # !target(_DIRDEP_USE)
+# if we were included recursively _DEP_TARGET_SPEC should be valid.
+.if empty(_DEP_TARGET_SPEC)
+# we may or may not have included a dependfile yet
_last_dependfile := ${.MAKE.MAKEFILES:M*/${.MAKE.DEPENDFILE_PREFIX}*:[-1]}
+.if !empty(_debug_reldir)
+.info ${DEP_RELDIR}.${DEP_TARGET_SPEC}: _last_dependfile='${_last_dependfile}'
+.endif
-# Note: if a makefile is read many times, the above
-# will not work, so we also test for DEP_MACHINE==depend below.
-.if empty(_last_dependfile)
-# we haven't included one yet
-DEP_MACHINE ?= ${TARGET_MACHINE:U${TARGET_SPEC}}
-# else it should be correctly set by ${.MAKE.DEPENDFILE}
-.elif ${_last_dependfile:E:${N_notmachine}} == "" || ${DEP_MACHINE:Uno:${N_notmachine}} == ""
-# don't rely on manually maintained files to be correct
-DEP_MACHINE := ${_DEP_MACHINE:U${TARGET_SPEC}}
+.if empty(_last_dependfile) || ${_last_dependfile:E:${N_notmachine}} == ""
+# this is all we have to work with
+DEP_MACHINE = ${TARGET_MACHINE:U${MACHINE}}
+_DEP_TARGET_SPEC := ${DEP_TARGET_SPEC}
.else
-# just in case
-DEP_MACHINE ?= ${_last_dependfile:E}
+_DEP_TARGET_SPEC = ${_last_dependfile:${M_dep_qual_fixes:ts:}:E}
+.endif
+.if !empty(_last_dependfile)
+# record that we've read dependfile for this
+_DIRDEP_CHECKED += ${_CURDIR}.${TARGET_SPEC}
+.endif
+.endif
+
+# by now _DEP_TARGET_SPEC should be set, parse it.
+.if ${TARGET_SPEC_VARS:[#]} > 1
+# we need to parse DEP_MACHINE may or may not contain more info
+_tspec := ${_DEP_TARGET_SPEC:S/,/ /g}
+.for i in ${_tspec_x}
+DEP_${TARGET_SPEC_VARS:[$i]} := ${_tspec:[$i]}
+.endfor
+.for v in ${TARGET_SPEC_VARS:O:u}
+.if empty(DEP_$v)
+.undef DEP_$v
+.endif
+.endfor
+.else
+DEP_MACHINE := ${_DEP_TARGET_SPEC}
.endif
# pickup customizations
@@ -198,12 +265,15 @@ DIRDEPS_FILTER += M${_DEP_RELDIR}*
# we supress SUBDIR when visiting the leaves
# we assume sys.mk will set MACHINE_ARCH
+# you can add extras to DIRDEP_USE_ENV
+# if there is no makefile in the target directory, we skip it.
_DIRDEP_USE: .USE .MAKE
@for m in ${.MAKE.MAKEFILE_PREFERENCE}; do \
test -s ${.TARGET:R}/$$m || continue; \
echo "${TRACER}Checking ${.TARGET:R} for ${.TARGET:E} ..."; \
+ MACHINE_ARCH= NO_SUBDIR=1 ${DIRDEP_USE_ENV} \
TARGET_SPEC=${.TARGET:E} \
- MACHINE=${.TARGET:E} MACHINE_ARCH= NO_SUBDIR=1 \
+ MACHINE=${.TARGET:E} \
${.MAKE} -C ${.TARGET:R} || exit 1; \
break; \
done
@@ -260,7 +330,7 @@ _this_dir := ${SRCTOP}/${DEP_RELDIR}
_dep_hack := ${_this_dir}/${.MAKE.DEPENDFILE_PREFIX}.inc
.-include "${_dep_hack}"
-.if ${DEP_RELDIR} != ${_DEP_RELDIR} || ${DEP_MACHINE} != ${TARGET_SPEC}
+.if ${DEP_RELDIR} != ${_DEP_RELDIR} || ${DEP_TARGET_SPEC} != ${TARGET_SPEC}
# this should be all
_machines := ${DEP_MACHINE}
.else
@@ -275,17 +345,23 @@ _machines += host
_machines := ${_machines:O:u}
.endif
-# reset these each time through
+.if ${TARGET_SPEC_VARS:[#]} > 1
+# we need to tweak _machines
+_dm := ${DEP_MACHINE}
+_machines := ${_machines:@DEP_MACHINE@${DEP_TARGET_SPEC}@}
+DEP_MACHINE := ${_dm}
+.endif
+
+# reset each time through
_build_dirs =
-_depdir_files =
.if ${DEP_RELDIR} == ${_DEP_RELDIR}
# pickup other machines for this dir if necessary
.if ${BUILD_AT_LEVEL0:Uyes} == "no"
_build_dirs += ${_machines:@m@${_CURDIR}.$m@}
.else
-_build_dirs += ${_machines:N${DEP_MACHINE}:@m@${_CURDIR}.$m@}
-.if ${DEP_MACHINE} == ${TARGET_SPEC}
+_build_dirs += ${_machines:N${DEP_TARGET_SPEC}:@m@${_CURDIR}.$m@}
+.if ${DEP_TARGET_SPEC} == ${TARGET_SPEC}
# pickup local dependencies now
.-include <.depend>
.endif
@@ -293,9 +369,8 @@ _build_dirs += ${_machines:N${DEP_MACHINE}:@m@${_CURDIR}.$m@}
.endif
.if !empty(_debug_reldir)
-.info ${DEP_RELDIR}.${DEP_MACHINE}: _last_dependfile='${_last_dependfile}'
-.info ${DEP_RELDIR}.${DEP_MACHINE}: DIRDEPS='${DIRDEPS}'
-.info ${DEP_RELDIR}.${DEP_MACHINE}: _machines='${_machines}'
+.info ${DEP_RELDIR}.${DEP_TARGET_SPEC}: DIRDEPS='${DIRDEPS}'
+.info ${DEP_RELDIR}.${DEP_TARGET_SPEC}: _machines='${_machines}'
.endif
.if !empty(DIRDEPS)
@@ -327,26 +402,8 @@ _build_dirs += \
${__qual_depdirs:N*.host} \
${_machines:@m@${__unqual_depdirs:@d@$d.$m@}@}
-_build_dirs := ${_build_dirs:O:u}
-
-# this is where we will pick up more dependencies from
-# the inner inline loops look complex, but save a significant
-# amount of memory compared to a .for loop.
-_depdir_files =
-.for d in ${_build_dirs}
-.if exists($d)
-# easy, we're building for ${MACHINE}
-_depdir_files += ${.MAKE.DEPENDFILE_PREFERENCE:T:@m@${exists($d/$m):?$d/$m:}@:[1]}
-.elif exists(${d:R}) && ${d:R:T} == ${d:T:R}
-# a little more complex - building for another machine
-# we will ensure the file is qualified with a machine
-# so that if necessary _DEP_MACHINE can be set below
-_depdir_files += ${.MAKE.DEPENDFILE_PREFERENCE:T:S,.${TARGET_SPEC}$,.${d:E},:S,.${MACHINE}$,.${d:E},:@m@${exists(${d:R}/$m):?${d:R}/$m:}@:[1]:@m@${"${m:M*.${d:E}}":?$m:$m.${d:E}}@}
-.endif
-.endfor
-
-# clean up
-_depdir_files := ${_depdir_files:O:u}
+# qualify everything now
+_build_dirs := ${_build_dirs:${M_dep_qual_fixes:ts:}:O:u}
.endif # empty DIRDEPS
@@ -360,48 +417,57 @@ dirdeps: ${_build_dirs}
${_build_dirs}: _DIRDEP_USE
.if !empty(_debug_reldir)
-.info ${DEP_RELDIR}.${DEP_MACHINE}: ${_build_dirs}
+.info ${DEP_RELDIR}.${DEP_TARGET_SPEC}: needs: ${_build_dirs}
.endif
+# this builds the dependency graph
.for m in ${_machines}
# it would be nice to do :N${.TARGET}
.if !empty(__qual_depdirs)
-.for q in ${__qual_depdirs:E:O:u:N$m}
+.for q in ${__qual_depdirs:${M_dep_qual_fixes:ts:}:E:O:u:N$m}
.if !empty(_debug_reldir) || ${DEBUG_DIRDEPS:@x@${${DEP_RELDIR}.$m:L:M$x}${${DEP_RELDIR}.$q:L:M$x}@} != ""
-.info ${DEP_RELDIR}.$m: ${_build_dirs:M*.$q}
+.info ${DEP_RELDIR}.$m: graph: ${_build_dirs:M*.$q}
.endif
${_this_dir}.$m: ${_build_dirs:M*.$q}
.endfor
.endif
.if !empty(_debug_reldir)
-.info ${DEP_RELDIR}.$m: ${_build_dirs:M*.$m:N${_this_dir}.$m}
+.info ${DEP_RELDIR}.$m: graph: ${_build_dirs:M*.$m:N${_this_dir}.$m}
.endif
${_this_dir}.$m: ${_build_dirs:M*.$m:N${_this_dir}.$m}
.endfor
.endif
-.for d in ${_depdir_files}
-.if ${.MAKE.MAKEFILES:M${d}} == ""
+# Now find more dependencies - and recurse.
+.for d in ${_build_dirs}
+.if ${_DIRDEP_CHECKED:M$d} == ""
+# once only
+_DIRDEP_CHECKED += $d
+# Note: _build_dirs is fully qualifed so d:R is always the directory
+.if exists(${d:R})
+# Warning: there is an assumption here that MACHINE is always
+# the first entry in TARGET_SPEC_VARS.
+# If TARGET_SPEC and MACHINE are insufficient, you have a problem.
+_m := ${.MAKE.DEPENDFILE_PREFERENCE:T:S;${TARGET_SPEC}$;${d:E};:S;${MACHINE};${d:E:C/,.*//};:@m@${exists(${d:R}/$m):?${d:R}/$m:}@:[1]}
+.if !empty(_m)
+_qm := ${_m:${M_dep_qual_fixes:ts:}}
.if !empty(_debug_search)
-.info Looking for $d
-.endif
-.if exists($d)
-.include <$d>
-.elif exists(${d:R})
-# an unqualified file exists, we qualified it above so we can set _DEP_MACHINE
-# it might be manually maintained and shared by all machine types
-# tell it the machine we are interested in.
-_DEP_MACHINE := ${d:E}
-.if !empty(_debug_reldir)
-.info loading ${d:R} for ${_DEP_MACHINE}
+.info Looking for ${_qm}
+.endif
+# we pass _DEP_TARGET_SPEC to tell the next step what we want
+_DEP_TARGET_SPEC := ${d:E}
+# some makefiles may still look at this
+_DEP_MACHINE := ${d:E:C/,.*//}
+.if !empty(_debug_reldir) && ${_qm} != ${_m}
+.info loading ${_m} for ${d:E}
+.endif
+.include <${_m}>
.endif
-# pretend we read $d, so we don't come by here again.
-.MAKE.MAKEFILES += $d
-.include <${d:R}>
.endif
.endif
.endfor
+
.endif # -V
.elif ${.MAKE.LEVEL} > 42
diff --git a/share/mk/gendirdeps.mk b/share/mk/gendirdeps.mk
index 890f4956f38e..8572a7adeb12 100644
--- a/share/mk/gendirdeps.mk
+++ b/share/mk/gendirdeps.mk
@@ -1,6 +1,7 @@
-# $Id: gendirdeps.mk,v 1.10 2012/06/30 00:37:50 sjg Exp $
+# $Id: gendirdeps.mk,v 1.12 2013/02/10 19:59:10 sjg Exp $
-# Copyright (c) 2010, Juniper Networks, Inc.
+# Copyright (c) 2010-2013, Juniper Networks, Inc.
+# All rights reserved.
#
# Redistribution and use in source and binary forms, with or without
# modification, are permitted provided that the following conditions
@@ -106,25 +107,26 @@ _py_d =
# we can afford to do this all the time.
DPDEPS ?= no
META2DEPS_CMD = ${_time} ${PYTHON} ${META2DEPS} ${_py_d} \
- -R ${RELDIR} -H ${HOST_TARGET} -O ${M2D_OBJROOT}
+ -R ${RELDIR} -H ${HOST_TARGET} \
+ ${M2D_OBJROOTS:O:u:@o@-O $o@}
+
.if ${DPDEPS:tl} != "no"
META2DEPS_CMD += -D ${DPDEPS}
.endif
+
+M2D_OBJROOTS += ${OBJTOP}/ ${_OBJROOT}
+.if defined(SB_OBJROOT)
+M2D_OBJROOTS += ${SB_OBJROOT}
+.endif
.if ${.MAKE.DEPENDFILE_PREFERENCE:U${.MAKE.DEPENDFILE}:M*.${MACHINE}} == ""
# meta2deps.py only groks objroot
# so we need to give it what it expects
-M2D_OBJROOT = ${OBJTOP}/
# and tell it not to add machine qualifiers
META2DEPS_ARGS += MACHINE=none
-.else
-.if defined(SB_OBJROOT)
-M2D_OBJROOT ?= ${SB_OBJROOT}
-.else
-M2D_OBJROOT = ${OBJTOP}/
-.endif
.endif
.if defined(SB_BACKING_SB)
-META2DEPS_CMD += -S ${SB_BACKING_SB}/src -O ${SB_BACKING_SB}/${SB_OBJPREFIX}
+META2DEPS_CMD += -S ${SB_BACKING_SB}/src
+M2D_OBJROOTS += ${SB_BACKING_SB}/${SB_OBJPREFIX}
.endif
META2DEPS_FILTER = sed 's,^src:,${SRCTOP}/,;s,^\([^/]\),${OBJTOP}/\1,' |
.elif ${META2DEPS:E} == "sh"
@@ -263,7 +265,6 @@ CAT_DEPEND ?= .depend
${_DEPENDFILE}: ${CAT_DEPEND:M.depend} ${META_FILES:O:u:@m@${exists($m):?$m:}@} ${_this} ${META2DEPS}
@(echo '# Autogenerated - do NOT edit!'; echo; \
echo 'DEP_RELDIR := $${_PARSEDIR:S,$${SRCTOP}/,,}'; echo; \
- echo 'DEP_MACHINE := $${.PARSEFILE:E}'; echo; \
echo 'DIRDEPS = \'; \
echo '${DIRDEPS:@d@ $d \\${.newline}@}'; echo; \
${_include_src_dirdeps} \
@@ -285,7 +286,6 @@ all: ${_DEPENDFILE}
${_DEPENDFILE}: ${MAKEFILE} ${_this}
@(echo '# Autogenerated - do NOT edit!'; echo; \
echo 'DEP_RELDIR := $${_PARSEDIR:S,$${SRCTOP}/,,}'; echo; \
- echo 'DEP_MACHINE := $${.PARSEFILE:E}'; echo; \
echo 'DIRDEPS = \'; \
echo '${DIRDEPS:@d@ $d \\${.newline}@}'; echo; \
echo '.include <dirdeps.mk>'; \
diff --git a/share/mk/meta2deps.py b/share/mk/meta2deps.py
index cb6d3213b221..a2bf05b3d3c0 100755
--- a/share/mk/meta2deps.py
+++ b/share/mk/meta2deps.py
@@ -35,9 +35,10 @@ We only pay attention to a subset of the information in the
"""
RCSid:
- $Id: meta2deps.py,v 1.7 2012/11/06 05:44:03 sjg Exp $
+ $Id: meta2deps.py,v 1.8 2013/02/10 19:21:46 sjg Exp $
- Copyright (c) 2011, Juniper Networks, Inc.
+ Copyright (c) 2011-2013, Juniper Networks, Inc.
+ All rights reserved.
Redistribution and use in source and binary forms, with or without
modification, are permitted provided that the following conditions
@@ -174,6 +175,8 @@ class MetaFile:
self.debug = getv(conf, 'debug', 0)
self.debug_out = getv(conf, 'debug_out', sys.stderr)
+ self.machine = getv(conf, 'MACHINE', '')
+
if not self.conf:
# some of the steps below we want to do only once
self.conf = conf
@@ -190,6 +193,12 @@ class MetaFile:
self.srctops.append(_srctop)
for objroot in getv(conf, 'OBJROOTS', []):
+ for e in ['/' + self.machine, '/' + self.machine + '/']:
+ if objroot.endswith(e):
+ # this is not what we want - fix it
+ objroot = objroot[0:-len(e)]
+ if e.endswith('/'):
+ objroot += '/'
if not objroot in self.objroots:
self.objroots.append(objroot)
_objroot = os.path.realpath(objroot)
@@ -198,6 +207,10 @@ class MetaFile:
if not _objroot in self.objroots:
self.objroots.append(_objroot)
+ # we want the longest match
+ self.srctops.sort(reverse=True)
+ self.objroots.sort(reverse=True)
+
if self.debug:
print >> self.debug_out, "host_target=", self.host_target
print >> self.debug_out, "srctops=", self.srctops
@@ -206,7 +219,6 @@ class MetaFile:
self.dirdep_re = re.compile(r'([^/]+)/(.+)')
self.curdir = getv(conf, 'CURDIR')
- self.machine = getv(conf, 'MACHINE', '')
self.reldir = getv(conf, 'RELDIR')
self.dpdeps = getv(conf, 'DPDEPS')
if self.dpdeps and not self.reldir: