diff options
Diffstat (limited to 'sntp/Makefile.in')
-rw-r--r-- | sntp/Makefile.in | 424 |
1 files changed, 339 insertions, 85 deletions
diff --git a/sntp/Makefile.in b/sntp/Makefile.in index 62acb87ad649..f77fe623a803 100644 --- a/sntp/Makefile.in +++ b/sntp/Makefile.in @@ -1,4 +1,4 @@ -# Makefile.in generated by automake 1.11 from Makefile.am. +# Makefile.in generated by automake 1.11.1 from Makefile.am. # @configure_input@ # Copyright (C) 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001, 2002, @@ -15,14 +15,13 @@ @SET_MAKE@ -# Makefile.am, by Harlan Stenn, from: -# Makefile for sntp -# N.M. Maclaren, October 2000. +# Makefile.am for JMK's SNTP, by Harlan Stenn # we traditionally installed software in bindir, while it should have gone # in sbindir. Now that we offer a choice, look in the "other" installation # subdir to warn folks if there is another version there. + VPATH = @srcdir@ pkgdatadir = $(datadir)/@PACKAGE@ pkgincludedir = $(includedir)/@PACKAGE@ @@ -42,16 +41,26 @@ PRE_UNINSTALL = : POST_UNINSTALL = : build_triplet = @build@ host_triplet = @host@ -bin_PROGRAMS = sntp$(EXEEXT) +@NTP_BINSUBDIR_IS_BIN_TRUE@bin_PROGRAMS = sntp$(EXEEXT) +@NTP_BINSUBDIR_IS_BIN_FALSE@sbin_PROGRAMS = sntp$(EXEEXT) @NEED_LIBOPTS_TRUE@am__append_1 = libopts -DIST_COMMON = README $(am__configure_deps) $(dist_man_MANS) \ - $(srcdir)/Makefile.am $(srcdir)/Makefile.in \ - $(srcdir)/bincheck.mf $(srcdir)/config.h.in \ - $(top_srcdir)/configure compile config.guess config.sub \ +DIST_COMMON = $(am__configure_deps) $(srcdir)/Makefile.am \ + $(srcdir)/Makefile.in $(srcdir)/config.h.in \ + $(top_srcdir)/bincheck.mf $(top_srcdir)/configure \ + $(top_srcdir)/depsver.mf compile config.guess config.sub \ depcomp install-sh ltmain.sh missing subdir = . ACLOCAL_M4 = $(top_srcdir)/aclocal.m4 am__aclocal_m4_deps = $(top_srcdir)/libopts/m4/libopts.m4 \ + $(top_srcdir)/../m4/libtool.m4 \ + $(top_srcdir)/../m4/ltoptions.m4 \ + $(top_srcdir)/../m4/ltsugar.m4 \ + $(top_srcdir)/../m4/ltversion.m4 \ + $(top_srcdir)/../m4/lt~obsolete.m4 \ + $(top_srcdir)/../m4/ntp_cacheversion.m4 \ + $(top_srcdir)/../m4/ntp_dir_sep.m4 \ + $(top_srcdir)/../m4/ntp_lib_m.m4 \ + $(top_srcdir)/../m4/ntp_openssl.m4 $(top_srcdir)/../version.m4 \ $(top_srcdir)/configure.ac am__configure_deps = $(am__aclocal_m4_deps) $(CONFIGURE_DEPENDENCIES) \ $(ACLOCAL_M4) @@ -61,16 +70,19 @@ mkinstalldirs = $(install_sh) -d CONFIG_HEADER = config.h CONFIG_CLEAN_FILES = CONFIG_CLEAN_VPATH_FILES = -am__installdirs = "$(DESTDIR)$(bindir)" "$(DESTDIR)$(man1dir)" -PROGRAMS = $(bin_PROGRAMS) +am__installdirs = "$(DESTDIR)$(bindir)" "$(DESTDIR)$(sbindir)" \ + "$(DESTDIR)$(man1dir)" +PROGRAMS = $(bin_PROGRAMS) $(sbin_PROGRAMS) am__objects_1 = -am_sntp_OBJECTS = internet.$(OBJEXT) main.$(OBJEXT) \ - sntp-opts.$(OBJEXT) socket.$(OBJEXT) timing.$(OBJEXT) \ - unix.$(OBJEXT) $(am__objects_1) +am_sntp_OBJECTS = crypto.$(OBJEXT) kod_management.$(OBJEXT) \ + log.$(OBJEXT) main.$(OBJEXT) networking.$(OBJEXT) \ + sntp.$(OBJEXT) sntp-opts.$(OBJEXT) utilities.$(OBJEXT) \ + $(am__objects_1) sntp_OBJECTS = $(am_sntp_OBJECTS) sntp_LDADD = $(LDADD) am__DEPENDENCIES_1 = -sntp_DEPENDENCIES = $(am__DEPENDENCIES_1) +sntp_DEPENDENCIES = $(am__DEPENDENCIES_1) $(am__DEPENDENCIES_1) \ + ../libntp/libntp.a DEFAULT_INCLUDES = -I.@am__isrc@ depcomp = $(SHELL) $(top_srcdir)/depcomp am__depfiles_maybe = depfiles @@ -116,7 +128,8 @@ am__base_list = \ sed '$$!N;$$!N;$$!N;$$!N;s/\n/ /g' man1dir = $(mandir)/man1 NROFF = nroff -MANS = $(dist_man_MANS) $(man_MANS) +MANS = $(man_MANS) +DATA = $(noinst_DATA) RECURSIVE_CLEAN_TARGETS = mostlyclean-recursive clean-recursive \ distclean-recursive maintainer-clean-recursive AM_RECURSIVE_TARGETS = $(RECURSIVE_TARGETS:-recursive=) \ @@ -124,7 +137,7 @@ AM_RECURSIVE_TARGETS = $(RECURSIVE_TARGETS:-recursive=) \ distdir dist dist-all distcheck ETAGS = etags CTAGS = ctags -DIST_SUBDIRS = libopts . +DIST_SUBDIRS = libopts DISTFILES = $(DIST_COMMON) $(DIST_SOURCES) $(TEXINFOS) $(EXTRA_DIST) distdir = $(PACKAGE)-$(VERSION) top_distdir = $(distdir) @@ -177,12 +190,15 @@ CPPFLAGS = @CPPFLAGS@ CYGPATH_W = @CYGPATH_W@ DEFS = @DEFS@ DEPDIR = @DEPDIR@ -ECHO = @ECHO@ +DLLTOOL = @DLLTOOL@ +DSYMUTIL = @DSYMUTIL@ +DUMPBIN = @DUMPBIN@ ECHO_C = @ECHO_C@ ECHO_N = @ECHO_N@ ECHO_T = @ECHO_T@ EGREP = @EGREP@ EXEEXT = @EXEEXT@ +FGREP = @FGREP@ GREP = @GREP@ HAVE_INLINE = @HAVE_INLINE@ INSTALL = @INSTALL@ @@ -190,18 +206,31 @@ INSTALL_DATA = @INSTALL_DATA@ INSTALL_PROGRAM = @INSTALL_PROGRAM@ INSTALL_SCRIPT = @INSTALL_SCRIPT@ INSTALL_STRIP_PROGRAM = @INSTALL_STRIP_PROGRAM@ +LCRYPTO = @LCRYPTO@ +LD = @LD@ LDFLAGS = @LDFLAGS@ +LIBM = @LIBM@ LIBOBJS = @LIBOBJS@ LIBOPTS_CFLAGS = @LIBOPTS_CFLAGS@ LIBOPTS_DIR = @LIBOPTS_DIR@ LIBOPTS_LDADD = @LIBOPTS_LDADD@ LIBS = @LIBS@ LIBTOOL = @LIBTOOL@ +LIPO = @LIPO@ LN_S = @LN_S@ LTLIBOBJS = @LTLIBOBJS@ MAKEINFO = @MAKEINFO@ +MANIFEST_TOOL = @MANIFEST_TOOL@ MKDIR_P = @MKDIR_P@ +NM = @NM@ +NMEDIT = @NMEDIT@ +OBJDUMP = @OBJDUMP@ OBJEXT = @OBJEXT@ +OPENSSL = @OPENSSL@ +OPENSSL_INC = @OPENSSL_INC@ +OPENSSL_LIB = @OPENSSL_LIB@ +OTOOL = @OTOOL@ +OTOOL64 = @OTOOL64@ PACKAGE = @PACKAGE@ PACKAGE_BUGREPORT = @PACKAGE_BUGREPORT@ PACKAGE_NAME = @PACKAGE_NAME@ @@ -210,7 +239,9 @@ PACKAGE_TARNAME = @PACKAGE_TARNAME@ PACKAGE_URL = @PACKAGE_URL@ PACKAGE_VERSION = @PACKAGE_VERSION@ PATH_SEPARATOR = @PATH_SEPARATOR@ +POSIX_SHELL = @POSIX_SHELL@ RANLIB = @RANLIB@ +SED = @SED@ SET_MAKE = @SET_MAKE@ SHELL = @SHELL@ STRIP = @STRIP@ @@ -219,13 +250,15 @@ abs_builddir = @abs_builddir@ abs_srcdir = @abs_srcdir@ abs_top_builddir = @abs_top_builddir@ abs_top_srcdir = @abs_top_srcdir@ +ac_ct_AR = @ac_ct_AR@ ac_ct_CC = @ac_ct_CC@ +ac_ct_DUMPBIN = @ac_ct_DUMPBIN@ am__include = @am__include@ am__leading_dot = @am__leading_dot@ am__quote = @am__quote@ am__tar = @am__tar@ am__untar = @am__untar@ -bindir = ${exec_prefix}/${BINSUBDIR} +bindir = @bindir@ build = @build@ build_alias = @build_alias@ build_cpu = @build_cpu@ @@ -265,37 +298,75 @@ target_alias = @target_alias@ top_build_prefix = @top_build_prefix@ top_builddir = @top_builddir@ top_srcdir = @top_srcdir@ -AUTOMAKE_OPTIONS = foreign -ACLOCAL_AMFLAGS = -I libopts/m4 -AM_CPPFLAGS = $(LIBOPTS_CFLAGS) -LDADD = $(LIBOPTS_LDADD) NULL = -#run_ag= cd $(srcdir) && autogen --writable -L $(top_srcdir)/include -run_ag = cd $(srcdir) && autogen --writable -SUBDIRS = $(am__append_1) . +AUTOMAKE_OPTIONS = foreign 1.10 +ACLOCAL_AMFLAGS = -I ../m4 -I libopts/m4 +AM_CPPFLAGS = $(LIBOPTS_CFLAGS) -I$(top_srcdir)/../include \ + -I$(top_srcdir)/../lib/isc/include \ + -I$(top_srcdir)/../lib/isc/nothreads/include \ + -I$(top_srcdir)/../lib/isc/unix/include + +LDADD = $(LIBOPTS_LDADD) $(LIBM) ../libntp/libntp.a @LCRYPTO@ +run_ag = cd $(srcdir) && env PATH="$(abs_builddir):$(PATH)" \ + autogen -L ../include --writable + +CLEANFILES = check-COPYRIGHT-submake .deps-ver +SUBDIRS = $(am__append_1) sntp_SOURCES = \ - header.h \ - internet.c \ - internet.h \ - kludges.h \ - main.c \ - sntp-opts.c \ - sntp-opts.h \ - socket.c \ - timing.c \ - unix.c \ + crypto.c \ + crypto.h \ + data_formats.h \ + header.h \ + kod_management.c \ + kod_management.h \ + log.c \ + log.h \ + main.c \ + main.h \ + networking.c \ + networking.h \ + sntp.c \ + sntp-opts.c \ + sntp-opts.h \ + utilities.c \ + utilities.h \ $(NULL) -dist_man_MANS = sntp.1 -EXTRA_DIST = bincheck.mf \ - COPYRIGHT \ - sntp-opts.def sntp.1 sntp-opts.texi sntp-opts.menu \ - autogen-version.def version.def +EXTRA_DIST = \ + $(srcdir)/autogen-version.def \ + bincheck.mf \ + $(srcdir)/COPYRIGHT \ + deps-ver \ + depsver.mf \ + sntp-opts.def \ + sntp-opts.menu \ + sntp-opts.texi \ + sntp.1 \ + sntp.html \ + sntp.texi \ + $(srcdir)/version.def \ + $(srcdir)/version.m4 \ + $(srcdir)/version.texi \ + $(NULL) -BUILT_SOURCES = check-autogen-version.def check-version.def \ - sntp-opts.c sntp-opts.h sntp.1 sntp-opts.texi sntp-opts.menu +OLD_EXTRA_DIST = \ + autogen-version.def version.def version.m4 version.texi + +BUILT_SOURCES = check-autogen-version.def check-version.def \ + check-version.m4 check-version.texi $(srcdir)/COPYRIGHT \ + libtool $(srcdir)/sntp-opts.c $(srcdir)/sntp-opts.h $(NULL) \ + .deps-ver +man_MANS = $(srcdir)/sntp.1 + +# HMS: Real Soon Now... +#info_TEXINFOS= sntp.texi +#sntp_TEXINFOS= sntp-opts.texi +noinst_DATA = \ + $(srcdir)/sntp.html \ + $(srcdir)/sntp-opts.texi \ + $(srcdir)/sntp-opts.menu \ + $(NULL) -man_MANS = sntp.1 all: $(BUILT_SOURCES) config.h $(MAKE) $(AM_MAKEFLAGS) all-recursive @@ -303,7 +374,7 @@ all: $(BUILT_SOURCES) config.h .SUFFIXES: .c .lo .o .obj am--refresh: @: -$(srcdir)/Makefile.in: $(srcdir)/Makefile.am $(srcdir)/bincheck.mf $(am__configure_deps) +$(srcdir)/Makefile.in: $(srcdir)/Makefile.am $(top_srcdir)/bincheck.mf $(top_srcdir)/depsver.mf $(am__configure_deps) @for dep in $?; do \ case '$(am__configure_deps)' in \ *$$dep*) \ @@ -395,6 +466,49 @@ clean-binPROGRAMS: list=`for p in $$list; do echo "$$p"; done | sed 's/$(EXEEXT)$$//'`; \ echo " rm -f" $$list; \ rm -f $$list +install-sbinPROGRAMS: $(sbin_PROGRAMS) + @$(NORMAL_INSTALL) + test -z "$(sbindir)" || $(MKDIR_P) "$(DESTDIR)$(sbindir)" + @list='$(sbin_PROGRAMS)'; test -n "$(sbindir)" || list=; \ + for p in $$list; do echo "$$p $$p"; done | \ + sed 's/$(EXEEXT)$$//' | \ + while read p p1; do if test -f $$p || test -f $$p1; \ + then echo "$$p"; echo "$$p"; else :; fi; \ + done | \ + sed -e 'p;s,.*/,,;n;h' -e 's|.*|.|' \ + -e 'p;x;s,.*/,,;s/$(EXEEXT)$$//;$(transform);s/$$/$(EXEEXT)/' | \ + sed 'N;N;N;s,\n, ,g' | \ + $(AWK) 'BEGIN { files["."] = ""; dirs["."] = 1 } \ + { d=$$3; if (dirs[d] != 1) { print "d", d; dirs[d] = 1 } \ + if ($$2 == $$4) files[d] = files[d] " " $$1; \ + else { print "f", $$3 "/" $$4, $$1; } } \ + END { for (d in files) print "f", d, files[d] }' | \ + while read type dir files; do \ + if test "$$dir" = .; then dir=; else dir=/$$dir; fi; \ + test -z "$$files" || { \ + echo " $(INSTALL_PROGRAM_ENV) $(LIBTOOL) $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=install $(INSTALL_PROGRAM) $$files '$(DESTDIR)$(sbindir)$$dir'"; \ + $(INSTALL_PROGRAM_ENV) $(LIBTOOL) $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=install $(INSTALL_PROGRAM) $$files "$(DESTDIR)$(sbindir)$$dir" || exit $$?; \ + } \ + ; done + +uninstall-sbinPROGRAMS: + @$(NORMAL_UNINSTALL) + @list='$(sbin_PROGRAMS)'; test -n "$(sbindir)" || list=; \ + files=`for p in $$list; do echo "$$p"; done | \ + sed -e 'h;s,^.*/,,;s/$(EXEEXT)$$//;$(transform)' \ + -e 's/$$/$(EXEEXT)/' `; \ + test -n "$$list" || exit 0; \ + echo " ( cd '$(DESTDIR)$(sbindir)' && rm -f" $$files ")"; \ + cd "$(DESTDIR)$(sbindir)" && rm -f $$files + +clean-sbinPROGRAMS: + @list='$(sbin_PROGRAMS)'; test -n "$$list" || exit 0; \ + echo " rm -f" $$list; \ + rm -f $$list || exit $$?; \ + test -n "$(EXEEXT)" || exit 0; \ + list=`for p in $$list; do echo "$$p"; done | sed 's/$(EXEEXT)$$//'`; \ + echo " rm -f" $$list; \ + rm -f $$list sntp$(EXEEXT): $(sntp_OBJECTS) $(sntp_DEPENDENCIES) @rm -f sntp$(EXEEXT) $(LINK) $(sntp_OBJECTS) $(sntp_LDADD) $(LIBS) @@ -405,12 +519,14 @@ mostlyclean-compile: distclean-compile: -rm -f *.tab.c -@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/internet.Po@am__quote@ +@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/crypto.Po@am__quote@ +@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/kod_management.Po@am__quote@ +@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/log.Po@am__quote@ @AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/main.Po@am__quote@ +@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/networking.Po@am__quote@ @AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/sntp-opts.Po@am__quote@ -@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/socket.Po@am__quote@ -@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/timing.Po@am__quote@ -@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/unix.Po@am__quote@ +@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/sntp.Po@am__quote@ +@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/utilities.Po@am__quote@ .c.o: @am__fastdepCC_TRUE@ $(COMPILE) -MT $@ -MD -MP -MF $(DEPDIR)/$*.Tpo -c -o $@ $< @@ -441,12 +557,12 @@ clean-libtool: distclean-libtool: -rm -f libtool config.lt -install-man1: $(dist_man_MANS) $(man_MANS) +install-man1: $(man_MANS) @$(NORMAL_INSTALL) test -z "$(man1dir)" || $(MKDIR_P) "$(DESTDIR)$(man1dir)" @list=''; test -n "$(man1dir)" || exit 0; \ { for i in $$list; do echo "$$i"; done; \ - l2='$(dist_man_MANS) $(man_MANS)'; for i in $$l2; do echo "$$i"; done | \ + l2='$(man_MANS)'; for i in $$l2; do echo "$$i"; done | \ sed -n '/\.1[a-z]*$$/p'; \ } | while read p; do \ if test -f $$p; then d=; else d="$(srcdir)/"; fi; \ @@ -472,7 +588,7 @@ uninstall-man1: @$(NORMAL_UNINSTALL) @list=''; test -n "$(man1dir)" || exit 0; \ files=`{ for i in $$list; do echo "$$i"; done; \ - l2='$(dist_man_MANS) $(man_MANS)'; for i in $$l2; do echo "$$i"; done | \ + l2='$(man_MANS)'; for i in $$l2; do echo "$$i"; done | \ sed -n '/\.1[a-z]*$$/p'; \ } | sed -e 's,.*/,,;h;s,.*\.,,;s,^[^1][0-9a-z]*$$,1,;x' \ -e 's,\.[0-9a-z]*$$,,;$(transform);G;s,\n,.,'`; \ @@ -487,7 +603,7 @@ uninstall-man1: # (which will cause the Makefiles to be regenerated when you run `make'); # (2) otherwise, pass the desired values on the `make' command line. $(RECURSIVE_TARGETS): - @failcom='exit 1'; \ + @fail= failcom='exit 1'; \ for f in x $$MAKEFLAGS; do \ case $$f in \ *=* | --[!k]*);; \ @@ -512,7 +628,7 @@ $(RECURSIVE_TARGETS): fi; test -z "$$fail" $(RECURSIVE_CLEAN_TARGETS): - @failcom='exit 1'; \ + @fail= failcom='exit 1'; \ for f in x $$MAKEFLAGS; do \ case $$f in \ *=* | --[!k]*);; \ @@ -689,7 +805,8 @@ distdir: $(DISTFILES) fi; \ done -test -n "$(am__skip_mode_fix)" \ - || find "$(distdir)" -type d ! -perm -777 -exec chmod a+rwx {} \; -o \ + || find "$(distdir)" -type d ! -perm -755 \ + -exec chmod u+rwx,go+rx {} \; -o \ ! -type d ! -perm -444 -links 1 -exec chmod a+r {} \; -o \ ! -type d ! -perm -400 -exec chmod a+r {} \; -o \ ! -type d ! -perm -444 -exec $(install_sh) -c -m a+r {} {} \; \ @@ -733,17 +850,17 @@ dist dist-all: distdir distcheck: dist case '$(DIST_ARCHIVES)' in \ *.tar.gz*) \ - GZIP=$(GZIP_ENV) gunzip -c $(distdir).tar.gz | $(am__untar) ;;\ + GZIP=$(GZIP_ENV) gzip -dc $(distdir).tar.gz | $(am__untar) ;;\ *.tar.bz2*) \ - bunzip2 -c $(distdir).tar.bz2 | $(am__untar) ;;\ + bzip2 -dc $(distdir).tar.bz2 | $(am__untar) ;;\ *.tar.lzma*) \ - unlzma -c $(distdir).tar.lzma | $(am__untar) ;;\ + lzma -dc $(distdir).tar.lzma | $(am__untar) ;;\ *.tar.xz*) \ xz -dc $(distdir).tar.xz | $(am__untar) ;;\ *.tar.Z*) \ uncompress -c $(distdir).tar.Z | $(am__untar) ;;\ *.shar.gz*) \ - GZIP=$(GZIP_ENV) gunzip -c $(distdir).shar.gz | unshar ;;\ + GZIP=$(GZIP_ENV) gzip -dc $(distdir).shar.gz | unshar ;;\ *.zip*) \ unzip $(distdir).zip ;;\ esac @@ -805,10 +922,10 @@ distcleancheck: distclean check-am: all-am check: $(BUILT_SOURCES) $(MAKE) $(AM_MAKEFLAGS) check-recursive -all-am: Makefile $(PROGRAMS) $(MANS) config.h +all-am: Makefile $(PROGRAMS) $(MANS) $(DATA) config.h installdirs: installdirs-recursive installdirs-am: - for dir in "$(DESTDIR)$(bindir)" "$(DESTDIR)$(man1dir)"; do \ + for dir in "$(DESTDIR)$(bindir)" "$(DESTDIR)$(sbindir)" "$(DESTDIR)$(man1dir)"; do \ test -z "$$dir" || $(MKDIR_P) "$$dir"; \ done install: $(BUILT_SOURCES) @@ -829,6 +946,7 @@ install-strip: mostlyclean-generic: clean-generic: + -test -z "$(CLEANFILES)" || rm -f $(CLEANFILES) distclean-generic: -test -z "$(CONFIG_CLEAN_FILES)" || rm -f $(CONFIG_CLEAN_FILES) @@ -840,7 +958,8 @@ maintainer-clean-generic: -test -z "$(BUILT_SOURCES)" || rm -f $(BUILT_SOURCES) clean: clean-recursive -clean-am: clean-binPROGRAMS clean-generic clean-libtool mostlyclean-am +clean-am: clean-binPROGRAMS clean-generic clean-libtool \ + clean-sbinPROGRAMS mostlyclean-am distclean: distclean-recursive -rm -f $(am__CONFIG_DISTCLEAN_FILES) @@ -867,7 +986,7 @@ install-dvi: install-dvi-recursive install-dvi-am: -install-exec-am: install-binPROGRAMS +install-exec-am: install-binPROGRAMS install-sbinPROGRAMS @$(NORMAL_INSTALL) $(MAKE) $(AM_MAKEFLAGS) install-exec-hook install-html: install-html-recursive @@ -910,7 +1029,8 @@ ps: ps-recursive ps-am: -uninstall-am: uninstall-binPROGRAMS uninstall-man +uninstall-am: uninstall-binPROGRAMS uninstall-man \ + uninstall-sbinPROGRAMS uninstall-man: uninstall-man1 @@ -920,25 +1040,33 @@ uninstall-man: uninstall-man1 .PHONY: $(RECURSIVE_CLEAN_TARGETS) $(RECURSIVE_TARGETS) CTAGS GTAGS \ all all-am am--refresh check check-am clean clean-binPROGRAMS \ - clean-generic clean-libtool ctags ctags-recursive dist \ - dist-all dist-bzip2 dist-gzip dist-lzma dist-shar dist-tarZ \ - dist-xz dist-zip distcheck distclean distclean-compile \ - distclean-generic distclean-hdr distclean-libtool \ - distclean-tags distcleancheck distdir distuninstallcheck dvi \ - dvi-am html html-am info info-am install install-am \ - install-binPROGRAMS install-data install-data-am install-dvi \ - install-dvi-am install-exec install-exec-am install-exec-hook \ - install-html install-html-am install-info install-info-am \ - install-man install-man1 install-pdf install-pdf-am install-ps \ - install-ps-am install-strip installcheck installcheck-am \ - installdirs installdirs-am maintainer-clean \ + clean-generic clean-libtool clean-sbinPROGRAMS ctags \ + ctags-recursive dist dist-all dist-bzip2 dist-gzip dist-lzma \ + dist-shar dist-tarZ dist-xz dist-zip distcheck distclean \ + distclean-compile distclean-generic distclean-hdr \ + distclean-libtool distclean-tags distcleancheck distdir \ + distuninstallcheck dvi dvi-am html html-am info info-am \ + install install-am install-binPROGRAMS install-data \ + install-data-am install-dvi install-dvi-am install-exec \ + install-exec-am install-exec-hook install-html install-html-am \ + install-info install-info-am install-man install-man1 \ + install-pdf install-pdf-am install-ps install-ps-am \ + install-sbinPROGRAMS install-strip installcheck \ + installcheck-am installdirs installdirs-am maintainer-clean \ maintainer-clean-generic mostlyclean mostlyclean-compile \ mostlyclean-generic mostlyclean-libtool pdf pdf-am ps ps-am \ tags tags-recursive uninstall uninstall-am \ - uninstall-binPROGRAMS uninstall-man uninstall-man1 + uninstall-binPROGRAMS uninstall-man uninstall-man1 \ + uninstall-sbinPROGRAMS FRC: + @: do-nothing action to prevent default SCCS get + @: FRC "force" depends on nothing and is not a file, so is + @: always out-of-date causing targets which depend on it to + @: similarly always be outdated causing their rules to fire + @: each time they or a dependent is built. + check-autogen-version.def: FRC @cd $(srcdir) \ && test -r ../include/autogen-version.def \ @@ -948,6 +1076,9 @@ check-autogen-version.def: FRC echo "Installing new sntp/autogen-version.def file"; \ fi ) +$(srcdir)/autogen-version.def: + $(MAKE) check-autogen-version.def + check-version.def: FRC @cd $(srcdir) \ && test -r ../include/version.def \ @@ -957,27 +1088,150 @@ check-version.def: FRC echo "Installing new sntp/version.def file"; \ fi ) +$(srcdir)/version.def: + $(MAKE) check-version.def + +check-version.m4: FRC + @cd $(srcdir) \ + && test -r ../version.m4 \ + && ( if cmp -s ../version.m4 version.m4; \ + then : ; \ + else cp ../version.m4 version.m4; \ + echo "Installing new sntp/version.m4 file"; \ + fi ) + +$(srcdir)/version.m4: + $(MAKE) check-version.m4 + +check-version.texi: FRC + @cd $(srcdir) \ + && test -r ../include/version.texi \ + && ( if cmp -s ../include/version.texi version.texi; \ + then : ; \ + else cp ../include/version.texi version.texi; \ + echo "Installing new sntp/version.texi file"; \ + fi ) + +$(srcdir)/version.texi: + $(MAKE) check-version.texi + +$(srcdir)/../COPYRIGHT: + cd .. && $(MAKE) COPYRIGHT-please + +check-COPYRIGHT-submake: $(srcdir)/../COPYRIGHT + @cmp -s $(srcdir)/../COPYRIGHT $(srcdir)/COPYRIGHT \ + || { cp $(srcdir)/../COPYRIGHT $(srcdir) \ + && echo 'updated sntp/COPYRIGHT installed' ;} + @echo 'submake avoided if this file is newer than parent COPYRIGHT' > $@ + +check-COPYRIGHT: FRC + [ ! -r $(srcdir)/../COPYRIGHT ] \ + || [ check-COPYRIGHT-submake -nt $(srcdir)/../COPYRIGHT ] \ + || $(MAKE) check-COPYRIGHT-submake + +$(srcdir)/COPYRIGHT: check-COPYRIGHT + @: do-nothing action to prevent any default + $(srcdir)/sntp-opts.h: $(srcdir)/sntp-opts.c -$(srcdir)/sntp-opts.c: $(srcdir)/sntp-opts.def $(srcdir)/version.def + @: do-nothing action to avoid default SCCS get, .h built with .c + +$(srcdir)/sntp-opts.c: $(srcdir)/sntp-opts.def $(srcdir)/version.def $(srcdir)/../include/copyright.def $(run_ag) sntp-opts.def -$(srcdir)/sntp.1: $(srcdir)/sntp-opts.def $(srcdir)/version.def +$(srcdir)/sntp.1: $(srcdir)/sntp-opts.def $(srcdir)/version.def $(srcdir)/../include/copyright.def $(run_ag) -Tagman1.tpl -bsntp sntp-opts.def -$(srcdir)/sntp-opts.texi $(srcdir)/sntp-opts.menu: $(srcdir)/sntp-opts.def $(srcdir)/version.def +$(srcdir)/sntp-opts.menu: $(srcdir)/sntp-opts.texi + @: do-nothing action to avoid default SCCS get, .menu built with .texi + +$(srcdir)/sntp-opts.texi: $(srcdir)/sntp-opts.def $(srcdir)/version.def $(srcdir)/../include/copyright.def $(run_ag) -Taginfo.tpl -DLEVEL=section sntp-opts.def + $(top_srcdir)/../scripts/check--help $@ + +$(srcdir)/sntp.html: $(srcdir)/sntp-opts.menu $(srcdir)/sntp-opts.texi $(srcdir)/sntp.texi $(srcdir)/version.texi + cd $(srcdir) && ( makeinfo --force --html --no-split -o sntp.html sntp.texi || true ) + +../libntp/libntp.a: + cd ../libntp && $(MAKE) libntp.a + +libtool: $(LIBTOOL_DEPS) + ./config.status --recheck install-exec-hook: - @case ${BINSUBDIR} in \ - bin) ODIR=${exec_prefix}/sbin ;; \ - sbin) ODIR=${exec_prefix}/bin ;; \ - esac; \ - test -z "${bin_PROGRAMS}${bin_SCRIPTS}" \ + @case ${BINSUBDIR} in \ + bin) ODIR=${sbindir} ;; \ + sbin) ODIR=${bindir} ;; \ + esac; \ + test -z "${bin_PROGRAMS}${bin_SCRIPTS}" \ || for i in ${bin_PROGRAMS} ${bin_SCRIPTS} " "; do \ test ! -f $$ODIR/$$i || echo "*** $$i is also in $$ODIR!"; \ done # +$(DEPDIR)/deps-ver: $(top_srcdir)/deps-ver + @[ -f $@ ] || \ + cp $(top_srcdir)/deps-ver $@ + @[ -w $@ ] || \ + chmod ug+w $@ + @cmp $(top_srcdir)/deps-ver $@ > /dev/null || ( \ + $(MAKE) clean && \ + echo -n "Prior $(subdir)/$(DEPDIR) version " && \ + cat $@ && \ + rm -rf $(DEPDIR) && \ + mkdir $(DEPDIR) && \ + case "$(top_builddir)" in \ + .) \ + ./config.status Makefile depfiles \ + ;; \ + ..) \ + cd .. && \ + ./config.status $(subdir)/Makefile depfiles && \ + cd $(subdir) \ + ;; \ + *) \ + echo 'Fatal: depsver.mf Automake fragment limited' \ + 'to immediate subdirectories.' && \ + echo "top_builddir: $(top_builddir)" && \ + echo "subdir: $(subdir)" && \ + exit 1 \ + ;; \ + esac && \ + echo -n "Cleaned $(subdir)/$(DEPDIR) version " && \ + cat $(top_srcdir)/deps-ver \ + ) + cp $(top_srcdir)/deps-ver $@ + +.deps-ver: $(top_srcdir)/deps-ver + @[ ! -d $(DEPDIR) ] || $(MAKE) $(DEPDIR)/deps-ver + @touch $@ + +# +# depsver.mf included in Makefile.am for directories with .deps +# +# When building in the same directory with sources that change over +# time, such as when tracking using bk, the .deps files can become +# stale with respect to moved, deleted, or superceded headers. Most +# commonly, this would exhibit as make reporting a failure to make a +# header file which is no longer in the location given. To address +# this issue, we use a deps-ver file which is updated with each change +# that breaks old .deps files. A copy of deps-ver is made into +# $(DEPDIR) if not already present. If $(DEPDIR)/deps-ver is present +# with different contents than deps-ver, we make clean to ensure all +# .o files built before the incompatible change are rebuilt along with +# their updated .deps files, then remove $(DEPDIR) and recreate it as +# empty stubs. +# +# It is normal when configured with --disable-dependency-tracking for +# the DEPDIR to not have been created. For this reason, we use the +# intermediate target .deps-ver, which invokes make recursively if +# DEPDIR exists. +# +# If you modify depsver.mf, please make the changes to the master +# copy, the one in sntp is copied by the bootstrap script from it. +# +# This comment block follows rather than leads the related code so that +# it stays with it in the generated Makefile.in and Makefile. +# # Tell versions [3.59,3.63) of GNU make to not export all variables. # Otherwise a system limit (for SysV at least) may be exceeded. |