diff options
Diffstat (limited to 'source/components/events/evxfregn.c')
-rw-r--r-- | source/components/events/evxfregn.c | 313 |
1 files changed, 313 insertions, 0 deletions
diff --git a/source/components/events/evxfregn.c b/source/components/events/evxfregn.c new file mode 100644 index 000000000000..493df9217de1 --- /dev/null +++ b/source/components/events/evxfregn.c @@ -0,0 +1,313 @@ +/****************************************************************************** + * + * Module Name: evxfregn - External Interfaces, ACPI Operation Regions and + * Address Spaces. + * + *****************************************************************************/ + +/* + * Copyright (C) 2000 - 2012, Intel Corp. + * All rights reserved. + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions + * are met: + * 1. Redistributions of source code must retain the above copyright + * notice, this list of conditions, and the following disclaimer, + * without modification. + * 2. Redistributions in binary form must reproduce at minimum a disclaimer + * substantially similar to the "NO WARRANTY" disclaimer below + * ("Disclaimer") and any redistribution must be conditioned upon + * including a substantially similar Disclaimer requirement for further + * binary redistribution. + * 3. Neither the names of the above-listed copyright holders nor the names + * of any contributors may be used to endorse or promote products derived + * from this software without specific prior written permission. + * + * Alternatively, this software may be distributed under the terms of the + * GNU General Public License ("GPL") version 2 as published by the Free + * Software Foundation. + * + * NO WARRANTY + * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS + * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT + * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTIBILITY AND FITNESS FOR + * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT + * HOLDERS OR CONTRIBUTORS BE LIABLE FOR SPECIAL, EXEMPLARY, OR CONSEQUENTIAL + * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS + * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) + * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, + * STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING + * IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE + * POSSIBILITY OF SUCH DAMAGES. + */ + +#define __EVXFREGN_C__ + +#include "acpi.h" +#include "accommon.h" +#include "acnamesp.h" +#include "acevents.h" + +#define _COMPONENT ACPI_EVENTS + ACPI_MODULE_NAME ("evxfregn") + + +/******************************************************************************* + * + * FUNCTION: AcpiInstallAddressSpaceHandler + * + * PARAMETERS: Device - Handle for the device + * SpaceId - The address space ID + * Handler - Address of the handler + * Setup - Address of the setup function + * Context - Value passed to the handler on each access + * + * RETURN: Status + * + * DESCRIPTION: Install a handler for all OpRegions of a given SpaceId. + * + * NOTE: This function should only be called after AcpiEnableSubsystem has + * been called. This is because any _REG methods associated with the Space ID + * are executed here, and these methods can only be safely executed after + * the default handlers have been installed and the hardware has been + * initialized (via AcpiEnableSubsystem.) + * + ******************************************************************************/ + +ACPI_STATUS +AcpiInstallAddressSpaceHandler ( + ACPI_HANDLE Device, + ACPI_ADR_SPACE_TYPE SpaceId, + ACPI_ADR_SPACE_HANDLER Handler, + ACPI_ADR_SPACE_SETUP Setup, + void *Context) +{ + ACPI_NAMESPACE_NODE *Node; + ACPI_STATUS Status; + + + ACPI_FUNCTION_TRACE (AcpiInstallAddressSpaceHandler); + + + /* Parameter validation */ + + if (!Device) + { + return_ACPI_STATUS (AE_BAD_PARAMETER); + } + + Status = AcpiUtAcquireMutex (ACPI_MTX_NAMESPACE); + if (ACPI_FAILURE (Status)) + { + return_ACPI_STATUS (Status); + } + + /* Convert and validate the device handle */ + + Node = AcpiNsValidateHandle (Device); + if (!Node) + { + Status = AE_BAD_PARAMETER; + goto UnlockAndExit; + } + + /* Install the handler for all Regions for this Space ID */ + + Status = AcpiEvInstallSpaceHandler (Node, SpaceId, Handler, Setup, Context); + if (ACPI_FAILURE (Status)) + { + goto UnlockAndExit; + } + + /* + * For the default SpaceIDs, (the IDs for which there are default region handlers + * installed) Only execute the _REG methods if the global initialization _REG + * methods have already been run (via AcpiInitializeObjects). In other words, + * we will defer the execution of the _REG methods for these SpaceIDs until + * execution of AcpiInitializeObjects. This is done because we need the handlers + * for the default spaces (mem/io/pci/table) to be installed before we can run + * any control methods (or _REG methods). There is known BIOS code that depends + * on this. + * + * For all other SpaceIDs, we can safely execute the _REG methods immediately. + * This means that for IDs like EmbeddedController, this function should be called + * only after AcpiEnableSubsystem has been called. + */ + switch (SpaceId) + { + case ACPI_ADR_SPACE_SYSTEM_MEMORY: + case ACPI_ADR_SPACE_SYSTEM_IO: + case ACPI_ADR_SPACE_PCI_CONFIG: + case ACPI_ADR_SPACE_DATA_TABLE: + + if (!AcpiGbl_RegMethodsExecuted) + { + /* We will defer execution of the _REG methods for this space */ + goto UnlockAndExit; + } + break; + + default: + break; + } + + /* Run all _REG methods for this address space */ + + Status = AcpiEvExecuteRegMethods (Node, SpaceId); + + +UnlockAndExit: + (void) AcpiUtReleaseMutex (ACPI_MTX_NAMESPACE); + return_ACPI_STATUS (Status); +} + +ACPI_EXPORT_SYMBOL (AcpiInstallAddressSpaceHandler) + + +/******************************************************************************* + * + * FUNCTION: AcpiRemoveAddressSpaceHandler + * + * PARAMETERS: Device - Handle for the device + * SpaceId - The address space ID + * Handler - Address of the handler + * + * RETURN: Status + * + * DESCRIPTION: Remove a previously installed handler. + * + ******************************************************************************/ + +ACPI_STATUS +AcpiRemoveAddressSpaceHandler ( + ACPI_HANDLE Device, + ACPI_ADR_SPACE_TYPE SpaceId, + ACPI_ADR_SPACE_HANDLER Handler) +{ + ACPI_OPERAND_OBJECT *ObjDesc; + ACPI_OPERAND_OBJECT *HandlerObj; + ACPI_OPERAND_OBJECT *RegionObj; + ACPI_OPERAND_OBJECT **LastObjPtr; + ACPI_NAMESPACE_NODE *Node; + ACPI_STATUS Status; + + + ACPI_FUNCTION_TRACE (AcpiRemoveAddressSpaceHandler); + + + /* Parameter validation */ + + if (!Device) + { + return_ACPI_STATUS (AE_BAD_PARAMETER); + } + + Status = AcpiUtAcquireMutex (ACPI_MTX_NAMESPACE); + if (ACPI_FAILURE (Status)) + { + return_ACPI_STATUS (Status); + } + + /* Convert and validate the device handle */ + + Node = AcpiNsValidateHandle (Device); + if (!Node || + ((Node->Type != ACPI_TYPE_DEVICE) && + (Node->Type != ACPI_TYPE_PROCESSOR) && + (Node->Type != ACPI_TYPE_THERMAL) && + (Node != AcpiGbl_RootNode))) + { + Status = AE_BAD_PARAMETER; + goto UnlockAndExit; + } + + /* Make sure the internal object exists */ + + ObjDesc = AcpiNsGetAttachedObject (Node); + if (!ObjDesc) + { + Status = AE_NOT_EXIST; + goto UnlockAndExit; + } + + /* Find the address handler the user requested */ + + HandlerObj = ObjDesc->Device.Handler; + LastObjPtr = &ObjDesc->Device.Handler; + while (HandlerObj) + { + /* We have a handler, see if user requested this one */ + + if (HandlerObj->AddressSpace.SpaceId == SpaceId) + { + /* Handler must be the same as the installed handler */ + + if (HandlerObj->AddressSpace.Handler != Handler) + { + Status = AE_BAD_PARAMETER; + goto UnlockAndExit; + } + + /* Matched SpaceId, first dereference this in the Regions */ + + ACPI_DEBUG_PRINT ((ACPI_DB_OPREGION, + "Removing address handler %p(%p) for region %s " + "on Device %p(%p)\n", + HandlerObj, Handler, AcpiUtGetRegionName (SpaceId), + Node, ObjDesc)); + + RegionObj = HandlerObj->AddressSpace.RegionList; + + /* Walk the handler's region list */ + + while (RegionObj) + { + /* + * First disassociate the handler from the region. + * + * NOTE: this doesn't mean that the region goes away + * The region is just inaccessible as indicated to + * the _REG method + */ + AcpiEvDetachRegion (RegionObj, TRUE); + + /* + * Walk the list: Just grab the head because the + * DetachRegion removed the previous head. + */ + RegionObj = HandlerObj->AddressSpace.RegionList; + + } + + /* Remove this Handler object from the list */ + + *LastObjPtr = HandlerObj->AddressSpace.Next; + + /* Now we can delete the handler object */ + + AcpiUtRemoveReference (HandlerObj); + goto UnlockAndExit; + } + + /* Walk the linked list of handlers */ + + LastObjPtr = &HandlerObj->AddressSpace.Next; + HandlerObj = HandlerObj->AddressSpace.Next; + } + + /* The handler does not exist */ + + ACPI_DEBUG_PRINT ((ACPI_DB_OPREGION, + "Unable to remove address handler %p for %s(%X), DevNode %p, obj %p\n", + Handler, AcpiUtGetRegionName (SpaceId), SpaceId, Node, ObjDesc)); + + Status = AE_NOT_EXIST; + +UnlockAndExit: + (void) AcpiUtReleaseMutex (ACPI_MTX_NAMESPACE); + return_ACPI_STATUS (Status); +} + +ACPI_EXPORT_SYMBOL (AcpiRemoveAddressSpaceHandler) + |