diff options
Diffstat (limited to 'src/arm/armada-370-seagate-personal-cloud.dtsi')
-rw-r--r-- | src/arm/armada-370-seagate-personal-cloud.dtsi | 84 |
1 files changed, 42 insertions, 42 deletions
diff --git a/src/arm/armada-370-seagate-personal-cloud.dtsi b/src/arm/armada-370-seagate-personal-cloud.dtsi index 1aba08e4377c..d079a89ee5a2 100644 --- a/src/arm/armada-370-seagate-personal-cloud.dtsi +++ b/src/arm/armada-370-seagate-personal-cloud.dtsi @@ -24,7 +24,7 @@ stdout-path = "serial0:115200n8"; }; - memory { + memory@0 { device_type = "memory"; reg = <0x00000000 0x20000000>; /* 512 MB */ }; @@ -33,15 +33,6 @@ ranges = <MBUS_ID(0xf0, 0x01) 0 0xf1000000 0x100000 MBUS_ID(0x01, 0xe0) 0 0xfff00000 0x100000>; - pcie-controller { - status = "okay"; - - /* USB 3.0 Bridge ASM1042A */ - pcie@1,0 { - status = "okay"; - }; - }; - internal-regs { coherency-fabric@20200 { broken-idle; @@ -51,15 +42,6 @@ status = "okay"; }; - mdio { - pinctrl-0 = <&mdio_pins>; - pinctrl-names = "default"; - - phy0: ethernet-phy@0 { - reg = <0>; - }; - }; - ethernet@74000 { status = "okay"; pinctrl-0 = <&ge1_rgmii_pins>; @@ -68,26 +50,6 @@ phy-mode = "rgmii-id"; }; - spi@10600 { - status = "okay"; - pinctrl-0 = <&spi0_pins2>; - pinctrl-names = "default"; - - spi-flash@0 { - #address-cells = <1>; - #size-cells = <1>; - /* MX25L8006E */ - compatible = "mxicy,mx25l8005", "jedec,spi-nor"; - reg = <0>; /* Chip select 0 */ - spi-max-frequency = <50000000>; - - partition@0 { - label = "u-boot"; - reg = <0x0 0x100000>; - }; - }; - }; - usb@50000 { status = "okay"; }; @@ -127,19 +89,19 @@ #address-cells = <1>; #size-cells = <0>; - button@1 { + power { label = "Power button"; linux,code = <KEY_POWER>; gpios = <&gpio1 19 GPIO_ACTIVE_HIGH>; debounce-interval = <100>; }; - button@2 { + reset { label = "Reset Button"; linux,code = <KEY_RESTART>; gpios = <&gpio1 23 GPIO_ACTIVE_LOW>; debounce-interval = <100>; }; - button@3 { + button { label = "USB VBUS error"; linux,code = <KEY_UNKNOWN>; gpios = <&gpio1 21 GPIO_ACTIVE_LOW>; @@ -163,6 +125,24 @@ }; }; +&pciec { + status = "okay"; + + /* USB 3.0 Bridge ASM1042A */ + pcie@1,0 { + status = "okay"; + }; +}; + +&mdio { + pinctrl-0 = <&mdio_pins>; + pinctrl-names = "default"; + + phy0: ethernet-phy@0 { + reg = <0>; + }; +}; + &pinctrl { pinctrl-0 = <&sata_led_pin>; pinctrl-names = "default"; @@ -176,3 +156,23 @@ marvell,function = "gpio"; }; }; + +&spi0 { + status = "okay"; + pinctrl-0 = <&spi0_pins2>; + pinctrl-names = "default"; + + spi-flash@0 { + #address-cells = <1>; + #size-cells = <1>; + /* MX25L8006E */ + compatible = "mxicy,mx25l8005", "jedec,spi-nor"; + reg = <0>; /* Chip select 0 */ + spi-max-frequency = <50000000>; + + partition@0 { + label = "u-boot"; + reg = <0x0 0x100000>; + }; + }; +}; |