diff options
Diffstat (limited to 'src/arm/aspeed-bmc-opp-romulus.dts')
| -rw-r--r-- | src/arm/aspeed-bmc-opp-romulus.dts | 135 |
1 files changed, 127 insertions, 8 deletions
diff --git a/src/arm/aspeed-bmc-opp-romulus.dts b/src/arm/aspeed-bmc-opp-romulus.dts index 8067793129ea..623b6ab42021 100644 --- a/src/arm/aspeed-bmc-opp-romulus.dts +++ b/src/arm/aspeed-bmc-opp-romulus.dts @@ -1,23 +1,19 @@ -// SPDX-License-Identifier: GPL-2.0 +// SPDX-License-Identifier: GPL-2.0+ /dts-v1/; - #include "aspeed-g5.dtsi" +#include <dt-bindings/gpio/aspeed-gpio.h> / { model = "Romulus BMC"; compatible = "ibm,romulus-bmc", "aspeed,ast2500"; - aliases { - serial4 = &uart5; - }; - chosen { stdout-path = &uart5; bootargs = "console=ttyS4,115200 earlyprintk"; }; - memory { - reg = <0x80000000 0x40000000>; + memory@80000000 { + reg = <0x80000000 0x20000000>; }; reserved-memory { @@ -29,6 +25,49 @@ no-map; reg = <0xbf000000 0x01000000>; /* 16M */ }; + + flash_memory: region@98000000 { + no-map; + reg = <0x98000000 0x04000000>; /* 64M */ + }; + }; + + leds { + compatible = "gpio-leds"; + + fault { + gpios = <&gpio ASPEED_GPIO(N, 2) GPIO_ACTIVE_LOW>; + }; + + identify { + gpios = <&gpio ASPEED_GPIO(N, 4) GPIO_ACTIVE_HIGH>; + }; + + power { + gpios = <&gpio ASPEED_GPIO(R, 5) GPIO_ACTIVE_LOW>; + }; + }; + + fsi: gpio-fsi { + compatible = "fsi-master-gpio", "fsi-master"; + #address-cells = <2>; + #size-cells = <0>; + + clock-gpios = <&gpio ASPEED_GPIO(AA, 0) GPIO_ACTIVE_HIGH>; + data-gpios = <&gpio ASPEED_GPIO(AA, 2) GPIO_ACTIVE_HIGH>; + mux-gpios = <&gpio ASPEED_GPIO(A, 6) GPIO_ACTIVE_HIGH>; + enable-gpios = <&gpio ASPEED_GPIO(D, 0) GPIO_ACTIVE_HIGH>; + trans-gpios = <&gpio ASPEED_GPIO(R, 2) GPIO_ACTIVE_HIGH>; + }; + + gpio-keys { + compatible = "gpio-keys"; + + checkstop { + label = "checkstop"; + gpios = <&gpio ASPEED_GPIO(J, 2) GPIO_ACTIVE_LOW>; + linux,code = <ASPEED_GPIO(J, 2)>; + }; }; }; @@ -38,6 +77,7 @@ status = "okay"; m25p,fast-read; label = "bmc"; +#include "openbmc-flash-layout.dtsi" }; }; @@ -53,6 +93,12 @@ }; }; +&lpc_ctrl { + status = "okay"; + memory-region = <&flash_memory>; + flash = <&spi1>; +}; + &uart1 { /* Rear RS-232 connector */ status = "okay"; @@ -81,6 +127,10 @@ pinctrl-0 = <&pinctrl_rmii1_default>; }; +&i2c1 { + status = "okay"; +}; + &i2c2 { status = "okay"; }; @@ -133,8 +183,77 @@ &i2c12 { status = "okay"; + + max31785@52 { + compatible = "maxim,max31785"; + reg = <0x52>; + }; +}; + +&gpio { + nic_func_mode0 { + gpio-hog; + gpios = <ASPEED_GPIO(D, 3) GPIO_ACTIVE_HIGH>; + output-low; + line-name = "nic_func_mode0"; + }; + nic_func_mode1 { + gpio-hog; + gpios = <ASPEED_GPIO(D, 4) GPIO_ACTIVE_HIGH>; + output-low; + line-name = "nic_func_mode1"; + }; }; &vuart { status = "okay"; }; + +&gfx { + status = "okay"; +}; + +&pinctrl { + aspeed,external-nodes = <&gfx &lhc>; +}; + +&pwm_tacho { + status = "okay"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_pwm0_default &pinctrl_pwm1_default>; + + fan@0 { + reg = <0x00>; + aspeed,fan-tach-ch = /bits/ 8 <0x08>; + }; + + fan@1 { + reg = <0x00>; + aspeed,fan-tach-ch = /bits/ 8 <0x09>; + }; + + fan@2 { + reg = <0x01>; + aspeed,fan-tach-ch = /bits/ 8 <0x0a>; + }; + + fan@3 { + reg = <0x01>; + aspeed,fan-tach-ch = /bits/ 8 <0x0b>; + }; + + fan@4 { + reg = <0x00>; + aspeed,fan-tach-ch = /bits/ 8 <0x0c>; + }; + + fan@5 { + reg = <0x00>; + aspeed,fan-tach-ch = /bits/ 8 <0x0d>; + }; + + fan@6 { + reg = <0x01>; + aspeed,fan-tach-ch = /bits/ 8 <0x0e>; + }; +}; |