diff options
Diffstat (limited to 'src/arm/rk3188-radxarock.dts')
| -rw-r--r-- | src/arm/rk3188-radxarock.dts | 20 |
1 files changed, 10 insertions, 10 deletions
diff --git a/src/arm/rk3188-radxarock.dts b/src/arm/rk3188-radxarock.dts index 5e8a235ed02d..ca0a1c4bc15c 100644 --- a/src/arm/rk3188-radxarock.dts +++ b/src/arm/rk3188-radxarock.dts @@ -58,7 +58,7 @@ autorepeat; power { - gpios = <&gpio0 4 GPIO_ACTIVE_LOW>; + gpios = <&gpio0 RK_PA4 GPIO_ACTIVE_LOW>; linux,code = <KEY_POWER>; label = "GPIO Key Power"; linux,input-type = <1>; @@ -72,19 +72,19 @@ green { label = "rock:green:user1"; - gpios = <&gpio0 12 GPIO_ACTIVE_LOW>; + gpios = <&gpio0 RK_PB4 GPIO_ACTIVE_LOW>; default-state = "off"; }; blue { label = "rock:blue:user2"; - gpios = <&gpio0 14 GPIO_ACTIVE_LOW>; + gpios = <&gpio0 RK_PB6 GPIO_ACTIVE_LOW>; default-state = "off"; }; sleep { label = "rock:red:power"; - gpios = <&gpio0 15 0>; + gpios = <&gpio0 RK_PB7 GPIO_ACTIVE_HIGH>; default-state = "off"; }; }; @@ -106,7 +106,7 @@ ir_recv: gpio-ir-receiver { compatible = "gpio-ir-receiver"; - gpios = <&gpio0 10 1>; + gpios = <&gpio0 RK_PB2 GPIO_ACTIVE_LOW>; pinctrl-names = "default"; pinctrl-0 = <&ir_recv_pin>; }; @@ -114,7 +114,7 @@ vcc_otg: usb-otg-regulator { compatible = "regulator-fixed"; enable-active-high; - gpio = <&gpio2 31 GPIO_ACTIVE_HIGH>; + gpio = <&gpio2 RK_PD7 GPIO_ACTIVE_HIGH>; pinctrl-names = "default"; pinctrl-0 = <&otg_vbus_drv>; regulator-name = "otg-vbus"; @@ -129,7 +129,7 @@ regulator-name = "sdmmc-supply"; regulator-min-microvolt = <3300000>; regulator-max-microvolt = <3300000>; - gpio = <&gpio3 1 GPIO_ACTIVE_LOW>; + gpio = <&gpio3 RK_PA1 GPIO_ACTIVE_LOW>; startup-delay-us = <100000>; vin-supply = <&vcc_io>; }; @@ -137,7 +137,7 @@ vcc_host: usb-host-regulator { compatible = "regulator-fixed"; enable-active-high; - gpio = <&gpio0 3 GPIO_ACTIVE_HIGH>; + gpio = <&gpio0 RK_PA3 GPIO_ACTIVE_HIGH>; pinctrl-names = "default"; pinctrl-0 = <&host_vbus_drv>; regulator-name = "host-pwr"; @@ -168,7 +168,7 @@ phy0: ethernet-phy@0 { reg = <0>; interrupt-parent = <&gpio3>; - interrupts = <26 IRQ_TYPE_LEVEL_LOW>; + interrupts = <RK_PD2 IRQ_TYPE_LEVEL_LOW>; }; }; @@ -184,7 +184,7 @@ compatible = "haoyu,hym8563"; reg = <0x51>; interrupt-parent = <&gpio0>; - interrupts = <13 IRQ_TYPE_EDGE_FALLING>; + interrupts = <RK_PB5 IRQ_TYPE_EDGE_FALLING>; pinctrl-names = "default"; pinctrl-0 = <&rtc_int>; #clock-cells = <0>; |