diff options
Diffstat (limited to 'src/arm/sun7i-a20-olinuxino-micro.dts')
-rw-r--r-- | src/arm/sun7i-a20-olinuxino-micro.dts | 354 |
1 files changed, 0 insertions, 354 deletions
diff --git a/src/arm/sun7i-a20-olinuxino-micro.dts b/src/arm/sun7i-a20-olinuxino-micro.dts deleted file mode 100644 index a1b89b2a2999..000000000000 --- a/src/arm/sun7i-a20-olinuxino-micro.dts +++ /dev/null @@ -1,354 +0,0 @@ -/* - * Copyright 2013 Maxime Ripard - * - * Maxime Ripard <maxime.ripard@free-electrons.com> - * - * This file is dual-licensed: you can use it either under the terms - * of the GPL or the X11 license, at your option. Note that this dual - * licensing only applies to this file, and not this project as a - * whole. - * - * a) This file is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; either version 2 of the - * License, or (at your option) any later version. - * - * This file is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * Or, alternatively, - * - * b) Permission is hereby granted, free of charge, to any person - * obtaining a copy of this software and associated documentation - * files (the "Software"), to deal in the Software without - * restriction, including without limitation the rights to use, - * copy, modify, merge, publish, distribute, sublicense, and/or - * sell copies of the Software, and to permit persons to whom the - * Software is furnished to do so, subject to the following - * conditions: - * - * The above copyright notice and this permission notice shall be - * included in all copies or substantial portions of the Software. - * - * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, - * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES - * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND - * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT - * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, - * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING - * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR - * OTHER DEALINGS IN THE SOFTWARE. - */ - -/dts-v1/; -#include "sun7i-a20.dtsi" -#include "sunxi-common-regulators.dtsi" - -#include <dt-bindings/gpio/gpio.h> -#include <dt-bindings/input/input.h> -#include <dt-bindings/interrupt-controller/irq.h> - -/ { - model = "Olimex A20-Olinuxino Micro"; - compatible = "olimex,a20-olinuxino-micro", "allwinner,sun7i-a20"; - - aliases { - serial0 = &uart0; - serial1 = &uart6; - serial2 = &uart7; - spi0 = &spi1; - spi1 = &spi2; - }; - - chosen { - stdout-path = "serial0:115200n8"; - }; - - hdmi-connector { - compatible = "hdmi-connector"; - type = "a"; - - port { - hdmi_con_in: endpoint { - remote-endpoint = <&hdmi_out_con>; - }; - }; - }; - - leds { - compatible = "gpio-leds"; - pinctrl-names = "default"; - pinctrl-0 = <&led_pins_olinuxino>; - - led { - label = "a20-olinuxino-micro:green:usr"; - gpios = <&pio 7 2 GPIO_ACTIVE_HIGH>; - default-state = "on"; - }; - }; -}; - -&ahci { - target-supply = <®_ahci_5v>; - status = "okay"; -}; - -&codec { - status = "okay"; -}; - -&cpu0 { - cpu-supply = <®_dcdc2>; -}; - -&de { - status = "okay"; -}; - -&ehci0 { - status = "okay"; -}; - -&ehci1 { - status = "okay"; -}; - -&gmac { - pinctrl-names = "default"; - pinctrl-0 = <&gmac_mii_pins>, <&gmac_txerr>; - phy-handle = <&phy1>; - phy-mode = "mii"; - status = "okay"; -}; - -&hdmi { - status = "okay"; -}; - -&hdmi_out { - hdmi_out_con: endpoint { - remote-endpoint = <&hdmi_con_in>; - }; -}; - -&i2c0 { - status = "okay"; - - axp209: pmic@34 { - reg = <0x34>; - interrupt-parent = <&nmi_intc>; - interrupts = <0 IRQ_TYPE_LEVEL_LOW>; - }; -}; - -&i2c1 { - status = "okay"; - - eeprom: eeprom@50 { - compatible = "atmel,24c16"; - reg = <0x50>; - pagesize = <16>; - }; -}; - -&i2c2 { - status = "okay"; -}; - -&lradc { - vref-supply = <®_vcc3v0>; - status = "okay"; - - button-191 { - label = "Volume Up"; - linux,code = <KEY_VOLUMEUP>; - channel = <0>; - voltage = <191274>; - }; - - button-392 { - label = "Volume Down"; - linux,code = <KEY_VOLUMEDOWN>; - channel = <0>; - voltage = <392644>; - }; - - button-601 { - label = "Menu"; - linux,code = <KEY_MENU>; - channel = <0>; - voltage = <601151>; - }; - - button-795 { - label = "Search"; - linux,code = <KEY_SEARCH>; - channel = <0>; - voltage = <795090>; - }; - - button-987 { - label = "Home"; - linux,code = <KEY_HOMEPAGE>; - channel = <0>; - voltage = <987387>; - }; - - button-1184 { - label = "Esc"; - linux,code = <KEY_ESC>; - channel = <0>; - voltage = <1184678>; - }; - - button-1398 { - label = "Enter"; - linux,code = <KEY_ENTER>; - channel = <0>; - voltage = <1398804>; - }; -}; - -&gmac_mdio { - phy1: ethernet-phy@1 { - reg = <1>; - }; -}; - -&mmc0 { - vmmc-supply = <®_vcc3v3>; - bus-width = <4>; - cd-gpios = <&pio 7 1 GPIO_ACTIVE_LOW>; /* PH1 */ - status = "okay"; -}; - -&mmc3 { - vmmc-supply = <®_vcc3v3>; - bus-width = <4>; - cd-gpios = <&pio 7 11 GPIO_ACTIVE_LOW>; /* PH11 */ - status = "okay"; -}; - -&ohci0 { - status = "okay"; -}; - -&ohci1 { - status = "okay"; -}; - -&otg_sram { - status = "okay"; -}; - -&pio { - gmac_txerr: gmac-txerr-pin { - pins = "PA17"; - function = "gmac"; - }; - - led_pins_olinuxino: led-pins { - pins = "PH2"; - function = "gpio_out"; - drive-strength = <20>; - }; -}; - -#include "axp209.dtsi" - -&ac_power_supply { - status = "okay"; -}; - -&battery_power_supply { - status = "okay"; -}; - -®_dcdc2 { - regulator-always-on; - regulator-min-microvolt = <1000000>; - regulator-max-microvolt = <1400000>; - regulator-name = "vdd-cpu"; -}; - -®_dcdc3 { - regulator-always-on; - regulator-min-microvolt = <1000000>; - regulator-max-microvolt = <1400000>; - regulator-name = "vdd-int-dll"; -}; - -®_ldo2 { - regulator-always-on; - regulator-min-microvolt = <3000000>; - regulator-max-microvolt = <3000000>; - regulator-name = "avcc"; -}; - -®_ahci_5v { - status = "okay"; -}; - -®_usb0_vbus { - status = "okay"; -}; - -®_usb1_vbus { - status = "okay"; -}; - -®_usb2_vbus { - status = "okay"; -}; - -&spi1 { - pinctrl-names = "default"; - pinctrl-0 = <&spi1_pi_pins>, - <&spi1_cs0_pi_pin>; - status = "okay"; -}; - -&spi2 { - pinctrl-names = "default"; - pinctrl-0 = <&spi2_pc_pins>, - <&spi2_cs0_pc_pin>; - status = "okay"; -}; - -&uart0 { - pinctrl-names = "default"; - pinctrl-0 = <&uart0_pb_pins>; - status = "okay"; -}; - -&uart6 { - pinctrl-names = "default"; - pinctrl-0 = <&uart6_pi_pins>; - status = "okay"; -}; - -&uart7 { - pinctrl-names = "default"; - pinctrl-0 = <&uart7_pi_pins>; - status = "okay"; -}; - -&usb_otg { - dr_mode = "otg"; - status = "okay"; -}; - -&usb_power_supply { - status = "okay"; -}; - -&usbphy { - usb0_id_det-gpios = <&pio 7 4 (GPIO_ACTIVE_HIGH | GPIO_PULL_UP)>; /* PH4 */ - usb0_vbus_det-gpios = <&pio 7 5 (GPIO_ACTIVE_HIGH | GPIO_PULL_DOWN)>; /* PH5 */ - usb0_vbus-supply = <®_usb0_vbus>; - usb1_vbus-supply = <®_usb1_vbus>; - usb2_vbus-supply = <®_usb2_vbus>; - status = "okay"; -}; |