aboutsummaryrefslogtreecommitdiff
path: root/src/arm/sun7i-a20-orangepi.dts
diff options
context:
space:
mode:
Diffstat (limited to 'src/arm/sun7i-a20-orangepi.dts')
-rw-r--r--src/arm/sun7i-a20-orangepi.dts201
1 files changed, 0 insertions, 201 deletions
diff --git a/src/arm/sun7i-a20-orangepi.dts b/src/arm/sun7i-a20-orangepi.dts
deleted file mode 100644
index 5d77f1d9818f..000000000000
--- a/src/arm/sun7i-a20-orangepi.dts
+++ /dev/null
@@ -1,201 +0,0 @@
-/*
- * Copyright 2015 Hans de Goede <hdegoede@redhat.com>
- *
- * Hans de Goede <hdegoede@redhat.com>
- *
- * This file is dual-licensed: you can use it either under the terms
- * of the GPL or the X11 license, at your option. Note that this dual
- * licensing only applies to this file, and not this project as a
- * whole.
- *
- * a) This file is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of the
- * License, or (at your option) any later version.
- *
- * This file is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * Or, alternatively,
- *
- * b) Permission is hereby granted, free of charge, to any person
- * obtaining a copy of this software and associated documentation
- * files (the "Software"), to deal in the Software without
- * restriction, including without limitation the rights to use,
- * copy, modify, merge, publish, distribute, sublicense, and/or
- * sell copies of the Software, and to permit persons to whom the
- * Software is furnished to do so, subject to the following
- * conditions:
- *
- * The above copyright notice and this permission notice shall be
- * included in all copies or substantial portions of the Software.
- *
- * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
- * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
- * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
- * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
- * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
- * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
- * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
- * OTHER DEALINGS IN THE SOFTWARE.
- */
-
-/dts-v1/;
-#include "sun7i-a20.dtsi"
-#include "sunxi-common-regulators.dtsi"
-
-#include <dt-bindings/gpio/gpio.h>
-#include <dt-bindings/interrupt-controller/irq.h>
-
-/ {
- model = "Orange Pi";
- compatible = "xunlong,orangepi", "allwinner,sun7i-a20";
-
- aliases {
- serial0 = &uart0;
- };
-
- chosen {
- stdout-path = "serial0:115200n8";
- };
-
- leds {
- compatible = "gpio-leds";
-
- led {
- label = "orangepi:green:usr";
- gpios = <&pio 7 24 GPIO_ACTIVE_HIGH>; /* PH24 */
- };
- };
-
- reg_gmac_3v3: gmac-3v3 {
- compatible = "regulator-fixed";
- regulator-name = "gmac-3v3";
- regulator-min-microvolt = <3300000>;
- regulator-max-microvolt = <3300000>;
- startup-delay-us = <100000>;
- enable-active-high;
- gpio = <&pio 7 23 GPIO_ACTIVE_HIGH>; /* PH23 */
- };
-};
-
-&ahci {
- status = "okay";
-};
-
-&ehci0 {
- status = "okay";
-};
-
-&ehci1 {
- status = "okay";
-};
-
-&gmac {
- pinctrl-names = "default";
- pinctrl-0 = <&gmac_rgmii_pins>;
- phy-handle = <&phy1>;
- phy-mode = "rgmii";
- phy-supply = <&reg_gmac_3v3>;
- status = "okay";
-};
-
-&i2c0 {
- status = "okay";
-
- axp209: pmic@34 {
- reg = <0x34>;
- interrupt-parent = <&nmi_intc>;
- interrupts = <0 IRQ_TYPE_LEVEL_LOW>;
- };
-};
-
-#include "axp209.dtsi"
-
-&ir0 {
- pinctrl-names = "default";
- pinctrl-0 = <&ir0_rx_pin>;
- status = "okay";
-};
-
-&gmac_mdio {
- phy1: ethernet-phy@1 {
- reg = <1>;
- };
-};
-
-&mmc0 {
- vmmc-supply = <&reg_vcc3v3>;
- bus-width = <4>;
- cd-gpios = <&pio 7 10 GPIO_ACTIVE_LOW>; /* PH10 */
- status = "okay";
-};
-
-&otg_sram {
- status = "okay";
-};
-
-&reg_dcdc2 {
- regulator-always-on;
- regulator-min-microvolt = <1000000>;
- regulator-max-microvolt = <1500000>;
- regulator-name = "vdd-cpu";
-};
-
-&reg_dcdc3 {
- regulator-always-on;
- regulator-min-microvolt = <1000000>;
- regulator-max-microvolt = <1400000>;
- regulator-name = "vdd-int-pll";
-};
-
-&reg_ldo1 {
- regulator-name = "vdd-rtc";
-};
-
-&reg_ldo2 {
- regulator-always-on;
- regulator-min-microvolt = <3000000>;
- regulator-max-microvolt = <3000000>;
- regulator-name = "avcc";
-};
-
-&reg_usb0_vbus {
- status = "okay";
-};
-
-&reg_usb1_vbus {
- gpio = <&pio 7 26 GPIO_ACTIVE_HIGH>; /* PH26 */
- status = "okay";
-};
-
-&reg_usb2_vbus {
- gpio = <&pio 7 22 GPIO_ACTIVE_HIGH>; /* PH22 */
- status = "okay";
-};
-
-&uart0 {
- pinctrl-names = "default";
- pinctrl-0 = <&uart0_pb_pins>;
- status = "okay";
-};
-
-&usb_otg {
- dr_mode = "otg";
- status = "okay";
-};
-
-&usb_power_supply {
- status = "okay";
-};
-
-&usbphy {
- usb0_id_det-gpios = <&pio 7 4 (GPIO_ACTIVE_HIGH | GPIO_PULL_UP)>; /* PH4 */
- usb0_vbus_power-supply = <&usb_power_supply>;
- usb0_vbus-supply = <&reg_usb0_vbus>;
- usb1_vbus-supply = <&reg_usb1_vbus>;
- usb2_vbus-supply = <&reg_usb2_vbus>;
- status = "okay";
-};