diff options
Diffstat (limited to 'src/arm/tegra114-tn7.dts')
| -rw-r--r-- | src/arm/tegra114-tn7.dts | 351 |
1 files changed, 351 insertions, 0 deletions
diff --git a/src/arm/tegra114-tn7.dts b/src/arm/tegra114-tn7.dts new file mode 100644 index 000000000000..f91c2c9b2f94 --- /dev/null +++ b/src/arm/tegra114-tn7.dts @@ -0,0 +1,351 @@ +/dts-v1/; + +#include <dt-bindings/input/input.h> +#include "tegra114.dtsi" + +/ { + model = "Tegra Note 7"; + compatible = "nvidia,tn7", "nvidia,tegra114"; + + chosen { + /* TN7's bootloader's arguments need to be overridden */ + bootargs = "console=ttyS0,115200n8 console=tty1 gpt fbcon=rotate:2"; + /* TN7's bootloader will place initrd at this address */ + linux,initrd-start = <0x82000000>; + linux,initrd-end = <0x82800000>; + }; + + aliases { + serial0 = &uartd; + }; + + firmware { + trusted-foundations { + compatible = "tlm,trusted-foundations"; + tlm,version-major = <2>; + tlm,version-minor = <8>; + }; + }; + + memory { + /* memory >= 0x37e00000 is reserved for firmware usage */ + reg = <0x80000000 0x37e00000>; + }; + + host1x@50000000 { + dsi@54300000 { + status = "okay"; + + vdd-supply = <&vdd_1v2_ap>; + + panel@0 { + compatible = "lg,ld070wx3-sl01"; + reg = <0>; + + power-supply = <&vdd_lcd>; + backlight = <&backlight>; + }; + }; + }; + + serial@70006300 { + status = "okay"; + }; + + pwm@7000a000 { + status = "okay"; + }; + + i2c@7000d000 { + status = "okay"; + clock-frequency = <400000>; + + palmas: pmic@58 { + compatible = "ti,palmas"; + reg = <0x58>; + interrupts = <GIC_SPI 86 IRQ_TYPE_LEVEL_LOW>; + + #interrupt-cells = <2>; + interrupt-controller; + + ti,system-power-controller; + + palmas_gpio: gpio { + compatible = "ti,palmas-gpio"; + gpio-controller; + #gpio-cells = <2>; + }; + + pmic { + compatible = "ti,tps65913-pmic", "ti,palmas-pmic"; + + ldoln-in-supply = <&vdd_smps10_out2>; + + regulators { + smps123 { + regulator-name = "vd-cpu"; + regulator-min-microvolt = <1000000>; + regulator-max-microvolt = <1000000>; + regulator-always-on; + regulator-boot-on; + }; + + smps45 { + regulator-name = "vd-soc"; + regulator-min-microvolt = <1100000>; + regulator-max-microvolt = <1100000>; + regulator-always-on; + regulator-boot-on; + }; + + smps6 { + regulator-name = "va-lcd-hv"; + regulator-min-microvolt = <3000000>; + regulator-max-microvolt = <3000000>; + regulator-always-on; + regulator-boot-on; + }; + + smps7 { + regulator-name = "vd-ddr"; + regulator-min-microvolt = <1350000>; + regulator-max-microvolt = <1350000>; + regulator-always-on; + regulator-boot-on; + }; + + vdd_1v8: smps8 { + regulator-name = "vs-pmu-1v8"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-always-on; + regulator-boot-on; + }; + + vdd_2v9_sys: smps9 { + regulator-name = "vs-sys-2v9"; + regulator-min-microvolt = <2900000>; + regulator-max-microvolt = <2900000>; + regulator-always-on; + regulator-boot-on; + }; + + vdd_smps10_out1: smps10_out1 { + regulator-name = "vd-smps10-out1"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + regulator-always-on; + regulator-boot-on; + }; + + vdd_smps10_out2: smps10_out2 { + regulator-name = "vd-smps10-out2"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + regulator-always-on; + regulator-boot-on; + }; + + ldo1 { + regulator-name = "va-pllx"; + regulator-min-microvolt = <1050000>; + regulator-max-microvolt = <1050000>; + regulator-always-on; + regulator-boot-on; + }; + + vdd_1v2_ap: ldo2 { + regulator-name = "va-ap-1v2"; + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1200000>; + regulator-always-on; + regulator-boot-on; + }; + + ldo3 { + regulator-name = "vd-fuse"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-always-on; + regulator-boot-on; + }; + + ldo4 { + regulator-name = "vd-ts-hv"; + regulator-min-microvolt = <3200000>; + regulator-max-microvolt = <3200000>; + regulator-always-on; + regulator-boot-on; + }; + + ldo5 { + regulator-name = "va-cam2-hv"; + regulator-min-microvolt = <2700000>; + regulator-max-microvolt = <2700000>; + }; + + ldo6 { + regulator-name = "va-sns-hv"; + regulator-min-microvolt = <2850000>; + regulator-max-microvolt = <2850000>; + }; + + ldo7 { + regulator-name = "va-cam1-hv"; + regulator-min-microvolt = <2700000>; + regulator-max-microvolt = <2700000>; + }; + + ldo8 { + regulator-name = "va-ap-rtc"; + regulator-min-microvolt = <1100000>; + regulator-max-microvolt = <1100000>; + ti,enable-ldo8-tracking; + regulator-always-on; + regulator-boot-on; + }; + + ldo9 { + regulator-name = "vi-sdcard"; + regulator-min-microvolt = <2900000>; + regulator-max-microvolt = <2900000>; + }; + + ldousb { + regulator-name = "avdd-usb"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-always-on; + regulator-boot-on; + }; + + ldoln { + regulator-name = "va-hdmi"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + }; + }; + }; + + rtc { + compatible = "ti,palmas-rtc"; + interrupt-parent = <&palmas>; + interrupts = <8 0>; + }; + + }; + }; + + pmc@7000e400 { + nvidia,invert-interrupt; + }; + + /* eMMC */ + sdhci@78000600 { + status = "okay"; + bus-width = <8>; + non-removable; + }; + + usb@7d000000 { + status = "okay"; + }; + + usb-phy@7d000000 { + status = "okay"; + nvidia,xcvr-setup = <7>; + nvidia,xcvr-lsfslew = <2>; + nvidia,xcvr-lsrslew = <2>; + interrupts = <GIC_SPI 20 IRQ_TYPE_LEVEL_HIGH>; + /* Should be changed to "otg" once we have vbus_supply */ + /* As of now, USB devices need to be powered externally */ + dr_mode = "host"; + }; + + backlight: backlight { + compatible = "pwm-backlight"; + pwms = <&pwm 1 40000>; + + brightness-levels = <0 4 8 16 32 64 128 255>; + default-brightness-level = <6>; + + power-supply = <&lcd_bl_en>; + }; + + clocks { + compatible = "simple-bus"; + #address-cells = <1>; + #size-cells = <0>; + + clk32k_in: clock { + compatible = "fixed-clock"; + reg = <0>; + #clock-cells = <0>; + clock-frequency = <32768>; + }; + }; + + gpio-keys { + compatible = "gpio-keys"; + + power { + label = "Power"; + gpios = <&gpio TEGRA_GPIO(Q, 0) GPIO_ACTIVE_LOW>; + linux,code = <KEY_POWER>; + gpio-key,wakeup; + }; + + volume_down { + label = "Volume Down"; + gpios = <&gpio TEGRA_GPIO(Q, 2) GPIO_ACTIVE_LOW>; + linux,code = <KEY_VOLUMEDOWN>; + }; + + volume_up { + label = "Volume Up"; + gpios = <&gpio TEGRA_GPIO(R, 2) GPIO_ACTIVE_LOW>; + linux,code = <KEY_VOLUMEUP>; + }; + }; + + regulators { + compatible = "simple-bus"; + #address-cells = <1>; + #size-cells = <0>; + + /* FIXME: output of BQ24192 */ + vs_sys: regulator@0 { + compatible = "regulator-fixed"; + reg = <0>; + regulator-name = "VS_SYS"; + regulator-min-microvolt = <4200000>; + regulator-max-microvolt = <4200000>; + regulator-always-on; + regulator-boot-on; + }; + + lcd_bl_en: regulator@1 { + compatible = "regulator-fixed"; + reg = <1>; + regulator-name = "VDD_LCD_BL"; + regulator-min-microvolt = <16500000>; + regulator-max-microvolt = <16500000>; + gpio = <&gpio TEGRA_GPIO(H, 2) GPIO_ACTIVE_HIGH>; + enable-active-high; + vin-supply = <&vs_sys>; + regulator-boot-on; + }; + + vdd_lcd: regulator@2 { + compatible = "regulator-fixed"; + reg = <2>; + regulator-name = "VD_LCD_1V8"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + gpio = <&palmas_gpio 4 GPIO_ACTIVE_HIGH>; + enable-active-high; + vin-supply = <&vdd_1v8>; + regulator-boot-on; + }; + }; +}; |