diff options
Diffstat (limited to 'src/arm/tegra30-apalis-v1.1-eval.dts')
| -rw-r--r-- | src/arm/tegra30-apalis-v1.1-eval.dts | 266 |
1 files changed, 0 insertions, 266 deletions
diff --git a/src/arm/tegra30-apalis-v1.1-eval.dts b/src/arm/tegra30-apalis-v1.1-eval.dts deleted file mode 100644 index ca277bf1df78..000000000000 --- a/src/arm/tegra30-apalis-v1.1-eval.dts +++ /dev/null @@ -1,266 +0,0 @@ -// SPDX-License-Identifier: GPL-2.0 OR MIT -/dts-v1/; - -#include <dt-bindings/input/input.h> -#include "tegra30-apalis-v1.1.dtsi" - -/ { - model = "Toradex Apalis T30 on Apalis Evaluation Board"; - compatible = "toradex,apalis_t30-v1.1-eval", "toradex,apalis_t30-eval", - "toradex,apalis_t30-v1.1", "toradex,apalis_t30", - "nvidia,tegra30"; - - aliases { - rtc0 = "/i2c@7000c000/rtc@68"; - rtc1 = "/i2c@7000d000/pmic@2d"; - rtc2 = "/rtc@7000e000"; - serial0 = &uarta; - serial1 = &uartb; - serial2 = &uartc; - serial3 = &uartd; - }; - - chosen { - stdout-path = "serial0:115200n8"; - }; - - pcie@3000 { - pci@1,0 { - status = "okay"; - }; - - pci@2,0 { - status = "okay"; - }; - }; - - host1x@50000000 { - dc@54200000 { - rgb { - status = "okay"; - nvidia,panel = <&panel>; - }; - }; - - hdmi@54280000 { - status = "okay"; - hdmi-supply = <®_5v0>; - }; - }; - - gpio@6000d000 { - /* Apalis GPIO7 MXM3 pin 15 PLX PEX 8605 PCIe Switch Reset */ - pex-perst-n-hog { - gpio-hog; - gpios = <TEGRA_GPIO(S, 7) GPIO_ACTIVE_HIGH>; - output-high; - line-name = "PEX_PERST_N"; - }; - }; - - /* Apalis UART1 */ - serial@70006000 { - status = "okay"; - }; - - /* Apalis UART2 */ - serial@70006040 { - status = "okay"; - }; - - /* Apalis UART3 */ - serial@70006200 { - status = "okay"; - }; - - /* Apalis UART4 */ - serial@70006300 { - status = "okay"; - }; - - pwm@7000a000 { - status = "okay"; - }; - - /* - * GEN1_I2C: I2C1_SDA/SCL on MXM3 pin 209/211 (e.g. RTC on carrier - * board) - */ - i2c@7000c000 { - status = "okay"; - clock-frequency = <400000>; - - pcie-switch@58 { - compatible = "plx,pex8605"; - reg = <0x58>; - }; - - /* M41T0M6 real time clock on carrier board */ - rtc@68 { - compatible = "st,m41t0"; - reg = <0x68>; - }; - }; - - /* GEN2_I2C: unused */ - - /* - * CAM_I2C: I2C3_SDA/SCL on MXM3 pin 201/203 (e.g. camera sensor on - * carrier board) - */ - i2c@7000c500 { - status = "okay"; - clock-frequency = <400000>; - }; - - /* DDC: I2C2_SDA/SCL on MXM3 pin 205/207 (e.g. display EDID) */ - i2c@7000c700 { - status = "okay"; - }; - - /* SPI1: Apalis SPI1 */ - spi@7000d400 { - status = "okay"; - spi-max-frequency = <25000000>; - }; - - /* SPI5: Apalis SPI2 */ - spi@7000dc00 { - status = "okay"; - spi-max-frequency = <25000000>; - }; - - /* Apalis SD1 */ - mmc@78000000 { - status = "okay"; - bus-width = <4>; - /* SD1_CD# */ - cd-gpios = <&gpio TEGRA_GPIO(CC, 5) GPIO_ACTIVE_LOW>; - no-1-8-v; - }; - - /* Apalis MMC1 */ - mmc@78000400 { - status = "okay"; - bus-width = <8>; - /* MMC1_CD# */ - cd-gpios = <&gpio TEGRA_GPIO(V, 3) GPIO_ACTIVE_LOW>; - vqmmc-supply = <®_vddio_sdmmc3>; - }; - - /* EHCI instance 0: USB1_DP/N -> USBO1_DP/N */ - usb@7d000000 { - status = "okay"; - dr_mode = "otg"; - }; - - usb-phy@7d000000 { - status = "okay"; - vbus-supply = <®_usbo1_vbus>; - }; - - /* EHCI instance 1: USB2_DP/N -> USBH2_DP/N */ - usb@7d004000 { - status = "okay"; - }; - - usb-phy@7d004000 { - status = "okay"; - vbus-supply = <®_usbh_vbus>; - }; - - /* EHCI instance 2: USB3_DP/N -> USBH3_DP/N */ - usb@7d008000 { - status = "okay"; - }; - - usb-phy@7d008000 { - status = "okay"; - vbus-supply = <®_usbh_vbus>; - }; - - backlight: backlight { - compatible = "pwm-backlight"; - brightness-levels = <255 231 223 207 191 159 127 0>; - default-brightness-level = <6>; - /* BKL1_ON */ - enable-gpios = <&gpio TEGRA_GPIO(V, 2) GPIO_ACTIVE_HIGH>; - power-supply = <®_3v3>; - pwms = <&pwm 0 5000000>; /* BKL1_PWM */ - }; - - gpio-keys { - compatible = "gpio-keys"; - - key-wakeup { - label = "WAKE1_MICO"; - gpios = <&gpio TEGRA_GPIO(V, 1) GPIO_ACTIVE_LOW>; - linux,code = <KEY_WAKEUP>; - debounce-interval = <10>; - wakeup-source; - }; - }; - - panel: panel { - /* - * edt,et057090dhu: EDT 5.7" LCD TFT - * edt,et070080dh6: EDT 7.0" LCD TFT - */ - compatible = "edt,et057090dhu"; - backlight = <&backlight>; - power-supply = <®_3v3>; - }; - - reg_3v3: regulator-3v3 { - compatible = "regulator-fixed"; - regulator-name = "3.3V_SW"; - regulator-min-microvolt = <3300000>; - regulator-max-microvolt = <3300000>; - }; - - reg_5v0: regulator-5v0 { - compatible = "regulator-fixed"; - regulator-name = "5V_SW"; - regulator-min-microvolt = <5000000>; - regulator-max-microvolt = <5000000>; - }; - - /* USBO1_EN */ - reg_usbo1_vbus: regulator-usbo1-vbus { - compatible = "regulator-fixed"; - regulator-name = "VCC_USBO1"; - regulator-min-microvolt = <5000000>; - regulator-max-microvolt = <5000000>; - gpio = <&gpio TEGRA_GPIO(T, 5) GPIO_ACTIVE_HIGH>; - enable-active-high; - vin-supply = <®_5v0>; - }; - - /* USBH_EN */ - reg_usbh_vbus: regulator-usbh-vbus { - compatible = "regulator-fixed"; - regulator-name = "VCC_USBH(2A|2C|2D|3|4)"; - regulator-min-microvolt = <5000000>; - regulator-max-microvolt = <5000000>; - gpio = <&gpio TEGRA_GPIO(DD, 1) GPIO_ACTIVE_HIGH>; - enable-active-high; - vin-supply = <®_5v0>; - }; - - /* - * 1.8 volt resp. 3.3 volt VDDIO_SDMMC3 depending on - * EN_+3.3_SDMMC3 GPIO - */ - reg_vddio_sdmmc3: regulator-vddio-sdmmc3 { - compatible = "regulator-gpio"; - regulator-name = "VDDIO_SDMMC3"; - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <3300000>; - regulator-type = "voltage"; - gpios = <&gpio TEGRA_GPIO(J, 5) GPIO_ACTIVE_HIGH>; - states = <1800000 0x0>, - <3300000 0x1>; - startup-delay-us = <100000>; - vin-supply = <&vddio_sdmmc_1v8_reg>; - }; -}; |