diff options
Diffstat (limited to 'src/arm64/marvell/armada-3720-db.dts')
-rw-r--r-- | src/arm64/marvell/armada-3720-db.dts | 64 |
1 files changed, 64 insertions, 0 deletions
diff --git a/src/arm64/marvell/armada-3720-db.dts b/src/arm64/marvell/armada-3720-db.dts index 86602c907a61..a89855f57091 100644 --- a/src/arm64/marvell/armada-3720-db.dts +++ b/src/arm64/marvell/armada-3720-db.dts @@ -46,6 +46,7 @@ /dts-v1/; +#include <dt-bindings/gpio/gpio.h> #include "armada-372x.dtsi" / { @@ -60,10 +61,51 @@ device_type = "memory"; reg = <0x00000000 0x00000000 0x00000000 0x20000000>; }; + + exp_usb3_vbus: usb3-vbus { + compatible = "regulator-fixed"; + regulator-name = "usb3-vbus"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + enable-active-high; + regulator-always-on; + gpio = <&gpio_exp 1 GPIO_ACTIVE_HIGH>; + }; + + usb3_phy: usb3-phy { + compatible = "usb-nop-xceiv"; + vcc-supply = <&exp_usb3_vbus>; + }; }; &i2c0 { + pinctrl-names = "default"; + pinctrl-0 = <&i2c1_pins>; status = "okay"; + + gpio_exp: pca9555@22 { + compatible = "nxp,pca9555"; + gpio-controller; + #gpio-cells = <2>; + + reg = <0x22>; + /* + * IO0_0: PWR_EN_USB2 IO1_0: PWR_EN_VTT + * IO0_1: PWR_EN_USB23 IO1_1: MPCIE_WDISABLE + * IO0_2: PWR_EN_SATA IO1_2: RGMII_DEV_RSTN + * IO0_3: PWR_EN_PCIE IO1_3: SGMII_DEV_RSTN + * IO0_4: PWR_EN_SD + * IO0_5: PWR_EN_EMMC + * IO0_6: PWR_EN_RGMII IO1_6: SATA_USB3.0_SEL + * IO0_7: PWR_EN_SGMII IO1_7: PWR_MCI_PS + */ + }; + + rtc@68 { + /* PT7C4337A from pericom fully compatible with the ds1337 */ + compatible = "dallas,ds1337"; + reg = <0x68>; + }; }; /* CON3 */ @@ -73,6 +115,8 @@ &spi0 { status = "okay"; + pinctrl-names = "default"; + pinctrl-0 = <&spi_quad_pins>; m25p80@0 { compatible = "jedec,spi-nor"; @@ -103,12 +147,24 @@ /* Exported on the micro USB connector CON32 through an FTDI */ &uart0 { + pinctrl-names = "default"; + pinctrl-0 = <&uart1_pins>; + status = "okay"; +}; + +&sdhci0 { + non-removable; + bus-width = <8>; + mmc-ddr-1_8v; + mmc-hs400-1_8v; + marvell,pad-type = "fixed-1-8v"; status = "okay"; }; /* CON31 */ &usb3 { status = "okay"; + usb-phy = <&usb3_phy>; }; /* CON17 (PCIe) / CON12 (mini-PCIe) */ @@ -116,6 +172,12 @@ status = "okay"; }; +/* CON27 */ +&usb2 { + status = "okay"; +}; + + &mdio { status = "okay"; phy0: ethernet-phy@0 { @@ -128,6 +190,8 @@ }; ð0 { + pinctrl-names = "default"; + pinctrl-0 = <&rgmii_pins>; phy-mode = "rgmii-id"; phy = <&phy0>; status = "okay"; |